summaryrefslogtreecommitdiffstats
path: root/board/amcc/ocotea/ocotea.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/amcc/ocotea/ocotea.c')
-rw-r--r--board/amcc/ocotea/ocotea.c527
1 files changed, 527 insertions, 0 deletions
diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c
new file mode 100644
index 0000000000..5f436eaeee
--- /dev/null
+++ b/board/amcc/ocotea/ocotea.c
@@ -0,0 +1,527 @@
+/*
+ * Copyright (C) 2004 PaulReynolds@lhsolutions.com
+ *
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#include "ocotea.h"
+#include <asm/processor.h>
+#include <spd_sdram.h>
+#include <440gx_enet.h>
+
+#define BOOT_SMALL_FLASH 32 /* 00100000 */
+#define FLASH_ONBD_N 2 /* 00000010 */
+#define FLASH_SRAM_SEL 1 /* 00000001 */
+
+long int fixed_sdram (void);
+void fpga_init (void);
+
+int board_early_init_f (void)
+{
+ unsigned long mfr;
+ unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
+ unsigned char switch_status;
+ unsigned long cs0_base;
+ unsigned long cs0_size;
+ unsigned long cs0_twt;
+ unsigned long cs2_base;
+ unsigned long cs2_size;
+ unsigned long cs2_twt;
+
+ /*-------------------------------------------------------------------------+
+ | Initialize EBC CONFIG
+ +-------------------------------------------------------------------------*/
+ mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
+ EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK |
+ EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS |
+ EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT |
+ EBC_CFG_PME_DISABLE | EBC_CFG_PR_32);
+
+ /*-------------------------------------------------------------------------+
+ | FPGA. Initialize bank 7 with default values.
+ +-------------------------------------------------------------------------*/
+ mtebc(pb7ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(7)|
+ EBC_BXAP_BCE_DISABLE|
+ EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
+ EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
+ EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED|
+ EBC_BXAP_BEM_WRITEONLY|
+ EBC_BXAP_PEN_DISABLED);
+ mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48300000)|
+ EBC_BXCR_BS_1MB|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT);
+
+ /* read FPGA base register FPGA_REG0 */
+ switch_status = *fpga_base;
+
+ if (switch_status & 0x40) {
+ cs0_base = 0xFFE00000;
+ cs0_size = EBC_BXCR_BS_2MB;
+ cs0_twt = 8;
+ cs2_base = 0xFF800000;
+ cs2_size = EBC_BXCR_BS_4MB;
+ cs2_twt = 10;
+ } else {
+ cs0_base = 0xFFC00000;
+ cs0_size = EBC_BXCR_BS_4MB;
+ cs0_twt = 10;
+ cs2_base = 0xFF800000;
+ cs2_size = EBC_BXCR_BS_2MB;
+ cs2_twt = 8;
+ }
+
+ /*-------------------------------------------------------------------------+
+ | 1 MB FLASH / 1 MB SRAM. Initialize bank 0 with default values.
+ +-------------------------------------------------------------------------*/
+ mtebc(pb0ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(cs0_twt)|
+ EBC_BXAP_BCE_DISABLE|
+ EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
+ EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
+ EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED|
+ EBC_BXAP_BEM_WRITEONLY|
+ EBC_BXAP_PEN_DISABLED);
+ mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(cs0_base)|
+ cs0_size|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT);
+
+ /*-------------------------------------------------------------------------+
+ | 8KB NVRAM/RTC. Initialize bank 1 with default values.
+ +-------------------------------------------------------------------------*/
+ mtebc(pb1ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(10)|
+ EBC_BXAP_BCE_DISABLE|
+ EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
+ EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
+ EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED|
+ EBC_BXAP_BEM_WRITEONLY|
+ EBC_BXAP_PEN_DISABLED);
+ mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x48000000)|
+ EBC_BXCR_BS_1MB|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT);
+
+ /*-------------------------------------------------------------------------+
+ | 4 MB FLASH. Initialize bank 2 with default values.
+ +-------------------------------------------------------------------------*/
+ mtebc(pb2ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(cs2_twt)|
+ EBC_BXAP_BCE_DISABLE|
+ EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
+ EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
+ EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED|
+ EBC_BXAP_BEM_WRITEONLY|
+ EBC_BXAP_PEN_DISABLED);
+ mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(cs2_base)|
+ cs2_size|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT);
+
+ /*-------------------------------------------------------------------------+
+ | FPGA. Initialize bank 7 with default values.
+ +-------------------------------------------------------------------------*/
+ mtebc(pb7ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(7)|
+ EBC_BXAP_BCE_DISABLE|
+ EBC_BXAP_CSN_ENCODE(1)|EBC_BXAP_OEN_ENCODE(1)|
+ EBC_BXAP_WBN_ENCODE(1)|EBC_BXAP_WBF_ENCODE(1)|
+ EBC_BXAP_TH_ENCODE(1)|EBC_BXAP_RE_DISABLED|
+ EBC_BXAP_BEM_WRITEONLY|
+ EBC_BXAP_PEN_DISABLED);
+ mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48300000)|
+ EBC_BXCR_BS_1MB|EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT);
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+ mtdcr (uic0er, 0x00000000); /* disable all */
+ mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr (uic0pr, 0xfffffe13); /* per ref-board manual */
+ mtdcr (uic0tr, 0x01c00008); /* per ref-board manual */
+ mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+ mtdcr (uic1er, 0x00000000); /* disable all */
+ mtdcr (uic1cr, 0x00000000); /* all non-critical */
+ mtdcr (uic1pr, 0xffffe0ff); /* per ref-board manual */
+ mtdcr (uic1tr, 0x00ffc000); /* per ref-board manual */
+ mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr (uic2sr, 0xffffffff); /* clear all */
+ mtdcr (uic2er, 0x00000000); /* disable all */
+ mtdcr (uic2cr, 0x00000000); /* all non-critical */
+ mtdcr (uic2pr, 0xffffffff); /* per ref-board manual */
+ mtdcr (uic2tr, 0x00ff8c0f); /* per ref-board manual */
+ mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (uic2sr, 0xffffffff); /* clear all */
+
+ mtdcr (uicb0sr, 0xfc000000); /* clear all */
+ mtdcr (uicb0er, 0x00000000); /* disable all */
+ mtdcr (uicb0cr, 0x00000000); /* all non-critical */
+ mtdcr (uicb0pr, 0xfc000000); /* */
+ mtdcr (uicb0tr, 0x00000000); /* */
+ mtdcr (uicb0vr, 0x00000001); /* */
+ mfsdr (sdr_mfr, mfr);
+ mfr &= ~SDR0_MFR_ECS_MASK;
+/* mtsdr(sdr_mfr, mfr); */
+ fpga_init();
+
+ return 0;
+}
+
+
+int checkboard (void)
+{
+ sys_info_t sysinfo;
+ unsigned char *s = getenv ("serial#");
+
+ get_sys_info (&sysinfo);
+
+ printf ("Board: Ocotea - AMCC PPC440GX Evaluation Board");
+ if (s != NULL) {
+ puts (", serial# ");
+ puts (s);
+ }
+ putc ('\n');
+
+ printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+ printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+ return (0);
+}
+
+
+long int initdram (int board_type)
+{
+ long dram_size = 0;
+
+#if defined(CONFIG_SPD_EEPROM)
+ dram_size = spd_sdram (0);
+#else
+ dram_size = fixed_sdram ();
+#endif
+ return dram_size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+ uint *pstart = (uint *) 0x00000000;
+ uint *pend = (uint *) 0x08000000;
+ uint *p;
+
+ for (p = pstart; p < pend; p++)
+ *p = 0xaaaaaaaa;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0xaaaaaaaa) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+
+ for (p = pstart; p < pend; p++)
+ *p = 0x55555555;
+
+ for (p = pstart; p < pend; p++) {
+ if (*p != 0x55555555) {
+ printf ("SDRAM test fails at: %08x\n", (uint) p);
+ return 1;
+ }
+ }
+ return 0;
+}
+#endif
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ *
+ * Assumes: 128 MB, non-ECC, non-registered
+ * PLB @ 133 MHz
+ *
+ ************************************************************************/
+long int fixed_sdram (void)
+{
+ uint reg;
+
+ /*--------------------------------------------------------------------
+ * Setup some default
+ *------------------------------------------------------------------*/
+ mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */
+ mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
+ mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+
+ /*--------------------------------------------------------------------
+ * Setup for board-specific specific mem
+ *------------------------------------------------------------------*/
+ /*
+ * Following for CAS Latency = 2.5 @ 133 MHz PLB
+ */
+ mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
+ /* RA=10 RD=3 */
+ mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
+ mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
+ mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
+ udelay (400); /* Delay 200 usecs (min) */
+
+ /*--------------------------------------------------------------------
+ * Enable the controller, then wait for DCEN to complete
+ *------------------------------------------------------------------*/
+ mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
+ for (;;) {
+ mfsdram (mem_mcsts, reg);
+ if (reg & 0x80000000)
+ break;
+ }
+
+ return (128 * 1024 * 1024); /* 128 MB */
+}
+#endif /* !defined(CONFIG_SPD_EEPROM) */
+
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller * hose )
+{
+ unsigned long strap;
+
+ /*--------------------------------------------------------------------------+
+ * The ocotea board is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *--------------------------------------------------------------------------*/
+ mfsdr(sdr_sdstp1, strap);
+ if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
+ printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
+ return 0;
+ }
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose )
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ /*--------------------------------------------------------------------------+
+ * Disable everything
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0SA, 0 ); /* disable */
+ out32r( PCIX0_PIM1SA, 0 ); /* disable */
+ out32r( PCIX0_PIM2SA, 0 ); /* disable */
+ out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+
+ /*--------------------------------------------------------------------------+
+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
+ * options to not support sizes such as 128/256 MB.
+ *--------------------------------------------------------------------------*/
+ out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+ out32r( PCIX0_PIM0LAH, 0 );
+ out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+
+ out32r( PCIX0_BAR0, 0 );
+
+ /*--------------------------------------------------------------------------+
+ * Program the board's subsystem id/vendor id
+ *--------------------------------------------------------------------------*/
+ out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+
+ out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* The ocotea board is always configured as host. */
+ return(1);
+}
+#endif /* defined(CONFIG_PCI) */
+
+
+void fpga_init(void)
+{
+ unsigned long group;
+ unsigned long sdr0_pfc0;
+ unsigned long sdr0_pfc1;
+ unsigned long sdr0_cust0;
+ unsigned long pvr;
+
+ mfsdr (sdr_pfc0, sdr0_pfc0);
+ mfsdr (sdr_pfc1, sdr0_pfc1);
+ group = SDR0_PFC1_EPS_DECODE(sdr0_pfc1);
+ pvr = get_pvr ();
+
+ sdr0_pfc0 = (sdr0_pfc0 & ~SDR0_PFC0_GEIE_MASK) | SDR0_PFC0_GEIE_TRE;
+ if ( ((pvr == PVR_440GX_RA) || (pvr == PVR_440GX_RB)) && ((group == 4) || (group == 5))) {
+ sdr0_pfc0 = (sdr0_pfc0 & ~SDR0_PFC0_TRE_MASK) | SDR0_PFC0_TRE_DISABLE;
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_CTEMS_MASK) | SDR0_PFC1_CTEMS_EMS;
+ out8(FPGA_REG2, (in8(FPGA_REG2) & ~FPGA_REG2_EXT_INTFACE_MASK) |
+ FPGA_REG2_EXT_INTFACE_ENABLE);
+ mtsdr (sdr_pfc0, sdr0_pfc0);
+ mtsdr (sdr_pfc1, sdr0_pfc1);
+ } else {
+ sdr0_pfc0 = (sdr0_pfc0 & ~SDR0_PFC0_TRE_MASK) | SDR0_PFC0_TRE_ENABLE;
+ switch (group)
+ {
+ case 0:
+ case 1:
+ case 2:
+ /* CPU trace A */
+ out8(FPGA_REG2, (in8(FPGA_REG2) & ~FPGA_REG2_EXT_INTFACE_MASK) |
+ FPGA_REG2_EXT_INTFACE_ENABLE);
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_CTEMS_MASK) | SDR0_PFC1_CTEMS_EMS;
+ mtsdr (sdr_pfc0, sdr0_pfc0);
+ mtsdr (sdr_pfc1, sdr0_pfc1);
+ break;
+ case 3:
+ case 4:
+ case 5:
+ case 6:
+ /* CPU trace B - Over EBMI */
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_CTEMS_MASK) | SDR0_PFC1_CTEMS_CPUTRACE;
+ mtsdr (sdr_pfc0, sdr0_pfc0);
+ mtsdr (sdr_pfc1, sdr0_pfc1);
+ out8(FPGA_REG2, (in8(FPGA_REG2) & ~FPGA_REG2_EXT_INTFACE_MASK) |
+ FPGA_REG2_EXT_INTFACE_DISABLE);
+ break;
+ }
+ }
+
+ /* Initialize the ethernet specific functions in the fpga */
+ mfsdr(sdr_pfc1, sdr0_pfc1);
+ mfsdr(sdr_cust0, sdr0_cust0);
+ if ( (SDR0_PFC1_EPS_DECODE(sdr0_pfc1) == 4) &&
+ ((SDR0_CUST0_RGMII2_DECODE(sdr0_cust0) == RGMII_FER_GMII) ||
+ (SDR0_CUST0_RGMII2_DECODE(sdr0_cust0) == RGMII_FER_TBI)))
+ {
+ if ((in8(FPGA_REG0) & FPGA_REG0_ECLS_MASK) == FPGA_REG0_ECLS_VER1)
+ {
+ out8(FPGA_REG3, (in8(FPGA_REG3) & ~FPGA_REG3_ENET_MASK1) |
+ FPGA_REG3_ENET_GROUP7);
+ }
+ else
+ {
+ if (SDR0_CUST0_RGMII2_DECODE(sdr0_cust0) == RGMII_FER_GMII)
+ {
+ out8(FPGA_REG3, (in8(FPGA_REG3) & ~FPGA_REG3_ENET_MASK2) |
+ FPGA_REG3_ENET_GROUP7);
+ }
+ else
+ {
+ out8(FPGA_REG3, (in8(FPGA_REG3) & ~FPGA_REG3_ENET_MASK2) |
+ FPGA_REG3_ENET_GROUP8);
+ }
+ }
+ }
+ else
+ {
+ if ((in8(FPGA_REG0) & FPGA_REG0_ECLS_MASK) == FPGA_REG0_ECLS_VER1)
+ {
+ out8(FPGA_REG3, (in8(FPGA_REG3) & ~FPGA_REG3_ENET_MASK1) |
+ FPGA_REG3_ENET_ENCODE1(SDR0_PFC1_EPS_DECODE(sdr0_pfc1)));
+ }
+ else
+ {
+ out8(FPGA_REG3, (in8(FPGA_REG3) & ~FPGA_REG3_ENET_MASK2) |
+ FPGA_REG3_ENET_ENCODE2(SDR0_PFC1_EPS_DECODE(sdr0_pfc1)));
+ }
+ }
+ out8(FPGA_REG4, FPGA_REG4_GPHY_MODE10 |
+ FPGA_REG4_GPHY_MODE100 | FPGA_REG4_GPHY_MODE1000 |
+ FPGA_REG4_GPHY_FRC_DPLX | FPGA_REG4_CONNECT_PHYS);
+
+ /* reset the gigabyte phy if necessary */
+ if (SDR0_PFC1_EPS_DECODE(sdr0_pfc1) >= 3)
+ {
+ if ((in8(FPGA_REG0) & FPGA_REG0_ECLS_MASK) == FPGA_REG0_ECLS_VER1)
+ {
+ out8(FPGA_REG3, in8(FPGA_REG3) & ~FPGA_REG3_GIGABIT_RESET_DISABLE);
+ udelay(10000);
+ out8(FPGA_REG3, in8(FPGA_REG3) | FPGA_REG3_GIGABIT_RESET_DISABLE);
+ }
+ else
+ {
+ out8(FPGA_REG2, in8(FPGA_REG2) & ~FPGA_REG2_GIGABIT_RESET_DISABLE);
+ udelay(10000);
+ out8(FPGA_REG2, in8(FPGA_REG2) | FPGA_REG2_GIGABIT_RESET_DISABLE);
+ }
+ }
+
+ /* Turn off the LED's */
+ out8(FPGA_REG3, (in8(FPGA_REG3) & ~FPGA_REG3_STAT_MASK) |
+ FPGA_REG3_STAT_LED8_DISAB | FPGA_REG3_STAT_LED4_DISAB |
+ FPGA_REG3_STAT_LED2_DISAB | FPGA_REG3_STAT_LED1_DISAB);
+
+ return;
+}
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+
+ return (ctrlc());
+}
+#endif
OpenPOWER on IntegriCloud