summaryrefslogtreecommitdiffstats
path: root/board/actux4/actux4.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/actux4/actux4.c')
-rw-r--r--board/actux4/actux4.c129
1 files changed, 0 insertions, 129 deletions
diff --git a/board/actux4/actux4.c b/board/actux4/actux4.c
deleted file mode 100644
index 81c545884e..0000000000
--- a/board/actux4/actux4.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * (C) Copyright 2007
- * Michael Schwingen, michael@schwingen.org
- *
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <asm/arch/ixp425.h>
-#include <asm/io.h>
-#include <miiphy.h>
-#ifdef CONFIG_PCI
-#include <pci.h>
-#include <asm/arch/ixp425pci.h>
-#endif
-
-#include "actux4_hw.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
- writel(0xbd113c42, IXP425_EXP_CS1);
- return 0;
-}
-
-int board_init(void)
-{
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x00000100;
-
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_nPWRON);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_nPWRON);
-
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST);
-
- /* led not populated on board*/
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED3);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_LED3);
-
- /* middle LED */
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_LED2);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_LED2);
-
- /* right LED */
- /* weak pulldown = LED weak on */
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_LED1);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_LED1);
-
- /* Setup GPIO's for Interrupt inputs */
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_USBINTA);
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_USBINTB);
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_USBINTC);
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_RTCINT);
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTA);
- GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI_INTB);
-
- GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_USBINTA);
- GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_USBINTB);
- GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_USBINTC);
- GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_RTCINT);
- GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTA);
- GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI_INTB);
-
- /* Setup GPIO's for 33MHz clock output */
- writel(0x011001FF, IXP425_GPIO_GPCLKR);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
- GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
-
- udelay(10000);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST);
- udelay(10000);
- GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST);
- udelay(10000);
- GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST);
-
- return 0;
-}
-
-/* Check Board Identity */
-int checkboard(void)
-{
- puts("Board: AcTux-4\n");
- return 0;
-}
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20);
- return 0;
-}
-
-#ifdef CONFIG_PCI
-struct pci_controller hose;
-
-void pci_init_board(void)
-{
- pci_ixp_init(&hose);
-}
-#endif
-
-/*
- * Hardcoded flash setup:
- * Flash 0 is a non-CFI SST 39VF020 flash, 8 bit flash / 8 bit bus.
- * Flash 1 is an Intel *16 flash using the CFI driver.
- */
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
- if (banknum == 0) { /* non-CFI boot flash */
- info->portwidth = 1;
- info->chipwidth = 1;
- info->interface = FLASH_CFI_X8;
- return 1;
- } else
- return 0;
-}
OpenPOWER on IntegriCloud