summaryrefslogtreecommitdiffstats
path: root/board/Seagate
diff options
context:
space:
mode:
Diffstat (limited to 'board/Seagate')
-rw-r--r--board/Seagate/dockstar/dockstar.c8
-rw-r--r--board/Seagate/goflexhome/goflexhome.c8
2 files changed, 8 insertions, 8 deletions
diff --git a/board/Seagate/dockstar/dockstar.c b/board/Seagate/dockstar/dockstar.c
index dc73dfaa3a..838f578104 100644
--- a/board/Seagate/dockstar/dockstar.c
+++ b/board/Seagate/dockstar/dockstar.c
@@ -26,9 +26,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(DOCKSTAR_OE_VAL_LOW,
- DOCKSTAR_OE_VAL_HIGH,
- DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH);
+ mvebu_config_gpio(DOCKSTAR_OE_VAL_LOW,
+ DOCKSTAR_OE_VAL_HIGH,
+ DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
@@ -143,7 +143,7 @@ void reset_phy(void)
static void set_leds(u32 leds, u32 blinking)
{
- struct kwgpio_registers *r = (struct kwgpio_registers *)KW_GPIO1_BASE;
+ struct kwgpio_registers *r = (struct kwgpio_registers *)MVEBU_GPIO1_BASE;
u32 oe = readl(&r->oe) | BOTH_LEDS;
writel(oe & ~leds, &r->oe); /* active low */
u32 bl = readl(&r->blink_en) & ~BOTH_LEDS;
diff --git a/board/Seagate/goflexhome/goflexhome.c b/board/Seagate/goflexhome/goflexhome.c
index 3e4ae89368..c3f4cbf84d 100644
--- a/board/Seagate/goflexhome/goflexhome.c
+++ b/board/Seagate/goflexhome/goflexhome.c
@@ -83,9 +83,9 @@ int board_early_init_f(void)
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
- kw_config_gpio(GOFLEXHOME_OE_VAL_LOW,
- GOFLEXHOME_OE_VAL_HIGH,
- GOFLEXHOME_OE_LOW, GOFLEXHOME_OE_HIGH);
+ mvebu_config_gpio(GOFLEXHOME_OE_VAL_LOW,
+ GOFLEXHOME_OE_VAL_HIGH,
+ GOFLEXHOME_OE_LOW, GOFLEXHOME_OE_HIGH);
kirkwood_mpp_conf(kwmpp_config, NULL);
return 0;
}
@@ -149,7 +149,7 @@ static void set_leds(u32 leds, u32 blinking)
u32 oe;
u32 bl;
- r = (struct kwgpio_registers *)KW_GPIO1_BASE;
+ r = (struct kwgpio_registers *)MVEBU_GPIO1_BASE;
oe = readl(&r->oe) | BOTH_LEDS;
writel(oe & ~leds, &r->oe); /* active low */
bl = readl(&r->blink_en) & ~BOTH_LEDS;
OpenPOWER on IntegriCloud