diff options
Diffstat (limited to 'board/Marvell/db64360/mv_eth.c')
| -rw-r--r-- | board/Marvell/db64360/mv_eth.c | 62 |
1 files changed, 31 insertions, 31 deletions
diff --git a/board/Marvell/db64360/mv_eth.c b/board/Marvell/db64360/mv_eth.c index e5a87ad295..dfc0bf7d30 100644 --- a/board/Marvell/db64360/mv_eth.c +++ b/board/Marvell/db64360/mv_eth.c @@ -1391,7 +1391,7 @@ u32 mv_get_internal_sram_base (void) * port_phy_addr). * * INPUT: -* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct +* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct * * OUTPUT: * See description. @@ -1551,7 +1551,7 @@ static void eth_port_init (ETH_PORT_INFO * p_eth_port_ctrl) * ether_init_rx_desc_ring for Rx queues). * * INPUT: -* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct +* ETH_PORT_INFO *p_eth_port_ctrl Ethernet port control struct * * OUTPUT: * Ethernet port is ready to receive and transmit. @@ -1641,7 +1641,7 @@ static bool eth_port_start (ETH_PORT_INFO * p_eth_port_ctrl) * INPUT: * ETH_PORT eth_port_num Port number. * char * p_addr Address to be set -* ETH_QUEUE queue Rx queue number for this MAC address. +* ETH_QUEUE queue Rx queue number for this MAC address. * * OUTPUT: * Set MAC address low and high registers. also calls eth_port_uc_addr() @@ -1679,10 +1679,10 @@ static void eth_port_uc_addr_set (ETH_PORT eth_port_num, * parameters. * * INPUT: -* ETH_PORT eth_port_num Port number. +* ETH_PORT eth_port_num Port number. * unsigned char uc_nibble Unicast MAC Address last nibble. -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. * * OUTPUT: * This function add/removes MAC addresses from the port unicast address @@ -1761,10 +1761,10 @@ static bool eth_port_uc_addr (ETH_PORT eth_port_num, * In this case, the function calculates the CRC-8bit value and calls * eth_port_omc_addr() routine to set the Other Multicast Table. * INPUT: -* ETH_PORT eth_port_num Port number. -* unsigned char *p_addr Unicast MAC Address. -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. +* ETH_PORT eth_port_num Port number. +* unsigned char *p_addr Unicast MAC Address. +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. * * OUTPUT: * See description. @@ -1895,10 +1895,10 @@ static void eth_port_mc_addr (ETH_PORT eth_port_num, * according to the argument given. * * INPUT: -* ETH_PORT eth_port_num Port number. -* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits). -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. +* ETH_PORT eth_port_num Port number. +* unsigned char mc_byte Multicast addr last byte (MAC DA[7:0] bits). +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. * * OUTPUT: * See description. @@ -1959,10 +1959,10 @@ static bool eth_port_smc_addr (ETH_PORT eth_port_num, * CRC-8 argument given. * * INPUT: -* ETH_PORT eth_port_num Port number. -* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1). -* ETH_QUEUE queue Rx queue number for this MAC address. -* int option 0 = Add, 1 = remove address. +* ETH_PORT eth_port_num Port number. +* unsigned char crc8 A CRC-8bit (Polynomial: x^8+x^2+x^1+1). +* ETH_QUEUE queue Rx queue number for this MAC address. +* int option 0 = Add, 1 = remove address. * * OUTPUT: * See description. @@ -2203,7 +2203,7 @@ static bool ethernet_phy_reset (ETH_PORT eth_port_num) * eth_port_reset - Reset Ethernet port * * DESCRIPTION: - * This routine resets the chip by aborting any SDMA engine activity and + * This routine resets the chip by aborting any SDMA engine activity and * clearing the MIB counters. The Receiver and the Transmit unit are in * idle state after this command is performed and the port is disabled. * @@ -2556,9 +2556,9 @@ static void eth_set_access_control (ETH_PORT eth_port_num, * * INPUT: * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE rx_queue Number of Rx queue. - * int rx_desc_num Number of Rx descriptors - * int rx_buff_size Size of Rx buffer + * ETH_QUEUE rx_queue Number of Rx queue. + * int rx_desc_num Number of Rx descriptors + * int rx_buff_size Size of Rx buffer * unsigned int rx_desc_base_addr Rx descriptors memory area base addr. * unsigned int rx_buff_base_addr Rx buffer memory area base addr. * @@ -2650,9 +2650,9 @@ static bool ether_init_rx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, * * INPUT: * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE tx_queue Number of Tx queue. - * int tx_desc_num Number of Tx descriptors - * int tx_buff_size Size of Tx buffer + * ETH_QUEUE tx_queue Number of Tx queue. + * int tx_desc_num Number of Tx descriptors + * int tx_buff_size Size of Tx buffer * unsigned int tx_desc_base_addr Tx descriptors memory area base addr. * unsigned int tx_buff_base_addr Tx buffer memory area base addr. * @@ -2745,7 +2745,7 @@ static bool ether_init_tx_desc_ring (ETH_PORT_INFO * p_eth_port_ctrl, * * INPUT: * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE tx_queue Number of Tx queue. + * ETH_QUEUE tx_queue Number of Tx queue. * PKT_INFO *p_pkt_info User packet buffer. * * OUTPUT: @@ -2861,7 +2861,7 @@ static ETH_FUNC_RET_STATUS eth_port_send (ETH_PORT_INFO * p_eth_port_ctrl, * * INPUT: * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE tx_queue Number of Tx queue. + * ETH_QUEUE tx_queue Number of Tx queue. * PKT_INFO *p_pkt_info User packet buffer. * * OUTPUT: @@ -2930,7 +2930,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO * * eth_port_receive - Get received information from Rx ring. * * DESCRIPTION: - * This routine returns the received data to the caller. There is no + * This routine returns the received data to the caller. There is no * data copying during routine operation. All information is returned * using pointer to packet information struct passed from the caller. * If the routine exhausts Rx ring resources then the resource error flag @@ -2938,7 +2938,7 @@ static ETH_FUNC_RET_STATUS eth_tx_return_desc (ETH_PORT_INFO * * * INPUT: * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE rx_queue Number of Rx queue. + * ETH_QUEUE rx_queue Number of Rx queue. * PKT_INFO *p_pkt_info User packet buffer. * * OUTPUT: @@ -2980,7 +2980,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl, /* Nothing to receive... */ if (command_status & (ETH_BUFFER_OWNED_BY_DMA)) { -/* DP(printf("Rx: command_status: %08x\n", command_status)); */ +/* DP(printf("Rx: command_status: %08x\n", command_status)); */ D_CACHE_FLUSH_LINE ((unsigned int) p_rx_curr_desc, 0); /* DP(printf("\nETH_END_OF_JOB ...\n"));*/ return ETH_END_OF_JOB; @@ -3019,7 +3019,7 @@ static ETH_FUNC_RET_STATUS eth_port_receive (ETH_PORT_INFO * p_eth_port_ctrl, * * INPUT: * ETH_PORT_INFO *p_eth_port_ctrl Ethernet Port Control srtuct. - * ETH_QUEUE rx_queue Number of Rx queue. + * ETH_QUEUE rx_queue Number of Rx queue. * PKT_INFO *p_pkt_info Information on the returned buffer. * * OUTPUT: |
