diff options
Diffstat (limited to 'board/MAI/bios_emulator/scitech/include/pcilib.h')
| -rw-r--r-- | board/MAI/bios_emulator/scitech/include/pcilib.h | 414 |
1 files changed, 414 insertions, 0 deletions
diff --git a/board/MAI/bios_emulator/scitech/include/pcilib.h b/board/MAI/bios_emulator/scitech/include/pcilib.h new file mode 100644 index 0000000000..e2d58b0848 --- /dev/null +++ b/board/MAI/bios_emulator/scitech/include/pcilib.h @@ -0,0 +1,414 @@ +/**************************************************************************** +* +* SciTech OS Portability Manager Library +* +* ======================================================================== +* +* The contents of this file are subject to the SciTech MGL Public +* License Version 1.0 (the "License"); you may not use this file +* except in compliance with the License. You may obtain a copy of +* the License at http://www.scitechsoft.com/mgl-license.txt +* +* Software distributed under the License is distributed on an +* "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or +* implied. See the License for the specific language governing +* rights and limitations under the License. +* +* The Original Code is Copyright (C) 1991-1998 SciTech Software, Inc. +* +* The Initial Developer of the Original Code is SciTech Software, Inc. +* All Rights Reserved. +* +* ======================================================================== +* +* Language: ANSI C +* Environment: Any +* +* Description: Header file for interface routines to the PCI bus. +* +****************************************************************************/ + +#ifndef __PCILIB_H +#define __PCILIB_H + +#include "scitech.h" + +/*---------------------- Macros and type definitions ----------------------*/ + +#pragma pack(1) + +/* Defines for PCIDeviceInfo.HeaderType */ + +typedef enum { + PCI_deviceType = 0x00, + PCI_bridgeType = 0x01, + PCI_cardBusBridgeType = 0x02, + PCI_multiFunctionType = 0x80 + } PCIHeaderTypeFlags; + +/* Defines for PCIDeviceInfo.Command */ + +typedef enum { + PCI_enableIOSpace = 0x0001, + PCI_enableMemorySpace = 0x0002, + PCI_enableBusMaster = 0x0004, + PCI_enableSpecialCylces = 0x0008, + PCI_enableWriteAndInvalidate = 0x0010, + PCI_enableVGACompatiblePalette = 0x0020, + PCI_enableParity = 0x0040, + PCI_enableWaitCycle = 0x0080, + PCI_enableSerr = 0x0100, + PCI_enableFastBackToBack = 0x0200 + } PCICommandFlags; + +/* Defines for PCIDeviceInfo.Status */ + +typedef enum { + PCI_statusCapabilitiesList = 0x0010, + PCI_status66MhzCapable = 0x0020, + PCI_statusUDFSupported = 0x0040, + PCI_statusFastBackToBack = 0x0080, + PCI_statusDataParityDetected = 0x0100, + PCI_statusDevSel = 0x0600, + PCI_statusSignaledTargetAbort = 0x0800, + PCI_statusRecievedTargetAbort = 0x1000, + PCI_statusRecievedMasterAbort = 0x2000, + PCI_statusSignaledSystemError = 0x4000, + PCI_statusDetectedParityError = 0x8000 + } PCIStatusFlags; + +/* PCI capability IDs */ + +typedef enum { + PCI_capsPowerManagement = 0x01, + PCI_capsAGP = 0x02, + PCI_capsMSI = 0x05 + } PCICapsType; + +/* PCI AGP rate definitions */ + +typedef enum { + PCI_AGPRate1X = 0x1, + PCI_AGPRate2X = 0x2, + PCI_AGPRate4X = 0x4 + } PCIAGPRateType; + +/* NOTE: We define all bitfield's as uint's, specifically so that the IBM + * Visual Age C++ compiler does not complain. We need them to be + * 32-bits wide, and this is the width of an unsigned integer, but + * we can't use a ulong to make this explicit or we get errors. + */ + +/* Structure defining a PCI slot identifier */ + +typedef union { + struct { + uint Zero:2; + uint Register:6; + uint Function:3; + uint Device:5; + uint Bus:8; + uint Reserved:7; + uint Enable:1; + } p; + ulong i; + } PCIslot; + +/* Structure defining the regular (type 0) PCI configuration register + * layout. We use this in a union below so we can describe all types of + * PCI configuration spaces with a single structure. + */ + +typedef struct { + ulong BaseAddress10; + ulong BaseAddress14; + ulong BaseAddress18; + ulong BaseAddress1C; + ulong BaseAddress20; + ulong BaseAddress24; + ulong CardbusCISPointer; + ushort SubSystemVendorID; + ushort SubSystemID; + ulong ROMBaseAddress; + uchar CapabilitiesPointer; + uchar reserved1; + uchar reserved2; + uchar reserved3; + ulong reserved4; + uchar InterruptLine; + uchar InterruptPin; + uchar MinimumGrant; + uchar MaximumLatency; + + /* These are not in the actual config space, but we enumerate them */ + ulong BaseAddress10Len; + ulong BaseAddress14Len; + ulong BaseAddress18Len; + ulong BaseAddress1CLen; + ulong BaseAddress20Len; + ulong BaseAddress24Len; + ulong ROMBaseAddressLen; + } PCIType0Info; + +/* Structure defining PCI to PCI bridge (type 1) PCI configuration register + * layout. We use this in a union below so we can describe all types of + * PCI configuration spaces with a single structure. + */ + +typedef struct { + ulong BaseAddress10; + ulong BaseAddress14; + uchar PrimaryBusNumber; + uchar SecondayBusNumber; + uchar SubordinateBusNumber; + uchar SecondaryLatencyTimer; + uchar IOBase; + uchar IOLimit; + ushort SecondaryStatus; + ushort MemoryBase; + ushort MemoryLimit; + ushort PrefetchableMemoryBase; + ushort PrefetchableMemoryLimit; + ulong PrefetchableBaseHi; + ulong PrefetchableLimitHi; + ushort IOBaseHi; + ushort IOLimitHi; + uchar CapabilitiesPointer; + uchar reserved1; + uchar reserved2; + uchar reserved3; + ulong ROMBaseAddress; + uchar InterruptLine; + uchar InterruptPin; + ushort BridgeControl; + } PCIType1Info; + +/* PCI to CardBus bridge (type 2) configuration information */ +typedef struct { + ulong SocketRegistersBaseAddress; + uchar CapabilitiesPointer; + uchar reserved1; + ushort SecondaryStatus; + uchar PrimaryBus; + uchar SecondaryBus; + uchar SubordinateBus; + uchar SecondaryLatency; + struct { + ulong Base; + ulong Limit; + } Range[4]; + uchar InterruptLine; + uchar InterruptPin; + ushort BridgeControl; + } PCIType2Info; + +/* Structure defining the PCI configuration space information for a + * single PCI device on the PCI bus. We enumerate all this information + * for all PCI devices on the bus. + */ + +typedef struct { + ulong dwSize; + PCIslot slot; + ulong mech1; + ushort VendorID; + ushort DeviceID; + ushort Command; + ushort Status; + uchar RevID; + uchar Interface; + uchar SubClass; + uchar BaseClass; + uchar CacheLineSize; + uchar LatencyTimer; + uchar HeaderType; + uchar BIST; + union { + PCIType0Info type0; + PCIType1Info type1; + PCIType2Info type2; + } u; + } PCIDeviceInfo; + +/* PCI Capability header structure. All PCI capabilities have the + * following header. + * + * capsID is used to identify the type of the structure as define above. + * + * next is the offset in PCI configuration space (0x40-0xFC) of the + * next capability structure in the list, or 0x00 if there are no more + * entries. + */ + +typedef struct { + uchar capsID; + uchar next; + } PCICapsHeader; + +/* Structure defining the PCI AGP status register contents */ + +typedef struct { + uint rate:3; + uint rsvd1:1; + uint fastWrite:1; + uint fourGB:1; + uint rsvd2:3; + uint sideBandAddressing:1; + uint rsvd3:14; + uint requestQueueDepthMaximum:8; + } PCIAGPStatus; + +/* Structure defining the PCI AGP command register contents */ + +typedef struct { + uint rate:3; + uint rsvd1:1; + uint fastWriteEnable:1; + uint fourGBEnable:1; + uint rsvd2:2; + uint AGPEnable:1; + uint SBAEnable:1; + uint rsvd3:14; + uint requestQueueDepth:8; + } PCIAGPCommand; + +/* AGP Capability structure */ + +typedef struct { + PCICapsHeader h; + ushort majMin; + PCIAGPStatus AGPStatus; + PCIAGPCommand AGPCommand; + } PCIAGPCapability; + +/* Structure for obtaining the PCI IRQ routing information */ + +typedef struct { + uchar bus; + uchar device; + uchar linkA; + ushort mapA; + uchar linkB; + ushort mapB; + uchar linkC; + ushort mapC; + uchar linkD; + ushort mapD; + uchar slot; + uchar reserved; + } PCIRouteInfo; + +typedef struct { + ushort BufferSize; + PCIRouteInfo *DataBuffer; + } PCIRoutingOptionsBuffer; + +#define NUM_PCI_REG (sizeof(PCIDeviceInfo) / 4) - 10 +#define PCI_BRIDGE_CLASS 0x06 +#define PCI_HOST_BRIDGE_SUBCLASS 0x00 +#define PCI_EARLY_VGA_CLASS 0x00 +#define PCI_EARLY_VGA_SUBCLASS 0x01 +#define PCI_DISPLAY_CLASS 0x03 +#define PCI_DISPLAY_VGA_SUBCLASS 0x00 +#define PCI_DISPLAY_XGA_SUBCLASS 0x01 +#define PCI_DISPLAY_OTHER_SUBCLASS 0x80 +#define PCI_MM_CLASS 0x04 +#define PCI_AUDIO_SUBCLASS 0x01 + +/* Macros to detect specific classes of devices */ + +#define PCI_IS_3DLABS_NONVGA_CLASS(pci) \ + (((pci)->BaseClass == PCI_DISPLAY_CLASS && (pci)->SubClass == PCI_DISPLAY_OTHER_SUBCLASS) \ + && ((pci)->VendorID == 0x3D3D || (pci)->VendorID == 0x104C)) + +#define PCI_IS_DISPLAY_CLASS(pci) \ + (((pci)->BaseClass == PCI_DISPLAY_CLASS && (pci)->SubClass == PCI_DISPLAY_VGA_SUBCLASS) \ + || ((pci)->BaseClass == PCI_DISPLAY_CLASS && (pci)->SubClass == PCI_DISPLAY_XGA_SUBCLASS) \ + || ((pci)->BaseClass == PCI_EARLY_VGA_CLASS && (pci)->SubClass == PCI_EARLY_VGA_SUBCLASS) \ + || PCI_IS_3DLABS_NONVGA_CLASS(pci)) + +/* Function codes to pass to PCI_accessReg */ + +#define PCI_READ_BYTE 0 +#define PCI_READ_WORD 1 +#define PCI_READ_DWORD 2 +#define PCI_WRITE_BYTE 3 +#define PCI_WRITE_WORD 4 +#define PCI_WRITE_DWORD 5 + +/* Macros to read/write PCI registers. These assume a global PCI array + * of device information. + */ + +#define PCI_readPCIRegB(index,device) \ + PCI_accessReg(index,0,0,&PCI[DeviceIndex[device]]) + +#define PCI_readPCIRegW(index,device) \ + PCI_accessReg(index,0,1,&PCI[DeviceIndex[device]]) + +#define PCI_readPCIRegL(index,device) \ + PCI_accessReg(index,0,2,&PCI[DeviceIndex[device]]) + +#define PCI_writePCIRegB(index,value,device) \ + PCI_accessReg(index,value,3,&PCI[DeviceIndex[device]]) + +#define PCI_writePCIRegW(index,value,device) \ + PCI_accessReg(index,value,4,&PCI[DeviceIndex[device]]) + +#define PCI_writePCIRegL(index,value,device) \ + PCI_accessReg(index,value,5,&PCI[DeviceIndex[device]]) + +#pragma pack() + +/*-------------------------- Function Prototypes --------------------------*/ + +#ifdef __cplusplus +extern "C" { /* Use "C" linkage when in C++ mode */ +#endif + +/* Function to determine the number of PCI devices in the system */ + +int _ASMAPI PCI_getNumDevices(void); + +/* Function to enumerate all device on the PCI bus */ + +int _ASMAPI PCI_enumerate(PCIDeviceInfo info[]); + +/* Function to access PCI configuration registers */ + +ulong _ASMAPI PCI_accessReg(int index,ulong value,int func,PCIDeviceInfo *info); + +/* Function to get PCI IRQ routing options for a card */ + +int _ASMAPI PCI_getIRQRoutingOptions(int numDevices,PCIRouteInfo *buffer); + +/* Function to re-route the PCI IRQ setting for a device */ + +ibool _ASMAPI PCI_setHardwareIRQ(PCIDeviceInfo *info,uint intPin,uint IRQ); + +/* Function to generate a special cyle on the specified PCI bus */ + +void _ASMAPI PCI_generateSpecialCyle(uint bus,ulong specialCycleData); + +/* Function to determine the size of a PCI base address register */ + +ulong _ASMAPI PCI_findBARSize(int bar,PCIDeviceInfo *pci); + +/* Function to read a block of PCI configuration space registers */ + +void _ASMAPI PCI_readRegBlock(PCIDeviceInfo *info,int index,void *dst,int count); + +/* Function to write a block of PCI configuration space registers */ + +void _ASMAPI PCI_writeRegBlock(PCIDeviceInfo *info,int index,void *src,int count); + +/* Function to return the 32-bit PCI BIOS entry point */ + +ulong _ASMAPI PCIBIOS_getEntry(void); + +#ifdef __cplusplus +} /* End of "C" linkage for C++ */ +#endif + +#endif /* __PCILIB_H */ + |
