diff options
Diffstat (limited to 'arch')
134 files changed, 2809 insertions, 1518 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 5afe8a91fd..5f10243fe6 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -45,8 +45,11 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ph1-ld4-ref.dtb \ uniphier-ph1-ld6b-ref.dtb \ uniphier-ph1-pro4-ref.dtb \ + uniphier-ph1-pro5-4kbox.dtb \ uniphier-ph1-sld3-ref.dtb \ - uniphier-ph1-sld8-ref.dtb + uniphier-ph1-sld8-ref.dtb \ + uniphier-proxstream2-gentil.dtb \ + uniphier-proxstream2-vodka.dtb dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \ zynq-zc706.dtb \ zynq-zed.dtb \ diff --git a/arch/arm/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/dts/uniphier-ph1-ld4-ref.dts index 20f2e9a7d2..9d697c1c88 100644 --- a/arch/arm/dts/uniphier-ph1-ld4-ref.dts +++ b/arch/arm/dts/uniphier-ph1-ld4-ref.dts @@ -61,6 +61,20 @@ }; /* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + &serial0 { - u-boot,dm-pre-reloc; + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart0 { + u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/dts/uniphier-ph1-ld6b-ref.dts index 58dc20e602..bd86f09326 100644 --- a/arch/arm/dts/uniphier-ph1-ld6b-ref.dts +++ b/arch/arm/dts/uniphier-ph1-ld6b-ref.dts @@ -3,6 +3,7 @@ * * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> * + * SPDX-License-Identifier: GPL-2.0+ */ /dts-v1/; @@ -54,6 +55,20 @@ }; /* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + &serial0 { - u-boot,dm-pre-reloc; + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart0 { + u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/dts/uniphier-ph1-pro4-ref.dts index ec1117d4a2..a825069638 100644 --- a/arch/arm/dts/uniphier-ph1-pro4-ref.dts +++ b/arch/arm/dts/uniphier-ph1-pro4-ref.dts @@ -68,6 +68,20 @@ }; /* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + &serial0 { - u-boot,dm-pre-reloc; + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart0 { + u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts b/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts new file mode 100644 index 0000000000..912bc27bea --- /dev/null +++ b/arch/arm/dts/uniphier-ph1-pro5-4kbox.dts @@ -0,0 +1,64 @@ +/* + * Device Tree Source for UniPhier PH1-Pro5 4KBOX Board (EVB-Pro5-4KBOX-M-V0) + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-ph1-pro5.dtsi" + +/ { + model = "UniPhier PH1-Pro5 4KBOX Board"; + compatible = "socionext,ph1-pro5-4kbox", "socionext,ph1-pro5"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS1,115200"; + stdout-path = &serial1; + }; + + aliases { + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +/* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + +&serial1 { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart1 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/dts/uniphier-ph1-sld8-ref.dts index 6269f9afd3..2cfcaff54a 100644 --- a/arch/arm/dts/uniphier-ph1-sld8-ref.dts +++ b/arch/arm/dts/uniphier-ph1-sld8-ref.dts @@ -65,6 +65,20 @@ }; /* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + &serial0 { - u-boot,dm-pre-reloc; + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart0 { + u-boot,dm-pre-reloc; }; diff --git a/arch/arm/dts/uniphier-pinctrl.dtsi b/arch/arm/dts/uniphier-pinctrl.dtsi index f67445f4f1..b58421396d 100644 --- a/arch/arm/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/dts/uniphier-pinctrl.dtsi @@ -3,43 +3,7 @@ * * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * SPDX-License-Identifier: GPL-2.0+ X11 */ &pinctrl { diff --git a/arch/arm/dts/uniphier-proxstream2-gentil.dts b/arch/arm/dts/uniphier-proxstream2-gentil.dts new file mode 100644 index 0000000000..81d2385bf9 --- /dev/null +++ b/arch/arm/dts/uniphier-proxstream2-gentil.dts @@ -0,0 +1,62 @@ +/* + * Device Tree Source for UniPhier ProXstream2 Gentil Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-proxstream2.dtsi" + +/ { + model = "UniPhier ProXstream2 Gentil Board"; + compatible = "socionext,proxstream2-gentil", "socionext,proxstream2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttyS2,115200"; + stdout-path = &serial2; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +/* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + +&serial2 { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart2 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/uniphier-proxstream2-vodka.dts b/arch/arm/dts/uniphier-proxstream2-vodka.dts new file mode 100644 index 0000000000..fba7b742ca --- /dev/null +++ b/arch/arm/dts/uniphier-proxstream2-vodka.dts @@ -0,0 +1,62 @@ +/* + * Device Tree Source for UniPhier ProXstream2 Vodka Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +/include/ "uniphier-proxstream2.dtsi" + +/ { + model = "UniPhier ProXstream2 Vodka Board"; + compatible = "socionext,proxstream2-vodka", "socionext,proxstream2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttyS2,115200"; + stdout-path = &serial2; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +/* for U-boot only */ +/ { + soc { + u-boot,dm-pre-reloc; + }; +}; + +&serial2 { + u-boot,dm-pre-reloc; +}; + +&pinctrl { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart2 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 7b49ad3b49..22ab798b96 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -6,49 +6,68 @@ config SYS_CONFIG_NAME config UNIPHIER_SMP bool -choice - prompt "UniPhier SoC select" - default MACH_PH1_PRO4 - -config MACH_PH1_SLD3 - bool "PH1-sLD3" +config ARCH_UNIPHIER_PH1_SLD3 + bool "UniPhier PH1-sLD3 SoC" select UNIPHIER_SMP + help + This enables support for UniPhier PH1-sLD3 SoC. -config MACH_PH1_LD4 - bool "PH1-LD4" +config ARCH_UNIPHIER_PH1_LD4 + bool "UniPhier PH1-LD4 SoC" + depends on !ARCH_UNIPHIER_PH1_SLD3 + help + This enables support for UniPhier PH1-LD4 SoC. -config MACH_PH1_PRO4 - bool "PH1-Pro4" +config ARCH_UNIPHIER_PH1_PRO4 + bool "UniPhier PH1-Pro4 SoC" select UNIPHIER_SMP + depends on !ARCH_UNIPHIER_PH1_SLD3 && \ + !ARCH_UNIPHIER_PH1_LD4 && \ + !ARCH_UNIPHIER_PH1_SLD8 + help + This enables support for UniPhier PH1-Pro4 SoC. -config MACH_PH1_SLD8 - bool "PH1-sLD8" - -endchoice +config ARCH_UNIPHIER_PH1_SLD8 + bool "UniPhier PH1-sLD8 SoC" + depends on !ARCH_UNIPHIER_PH1_SLD3 + help + This enables support for UniPhier PH1-sLD8 SoC. -choice - prompt "UniPhier Support Card select" - optional +config ARCH_UNIPHIER_PH1_PRO5 + bool "UniPhier PH1-Pro5 SoC" + select UNIPHIER_SMP + depends on !ARCH_UNIPHIER_PH1_SLD3 && \ + !ARCH_UNIPHIER_PH1_LD4 && \ + !ARCH_UNIPHIER_PH1_SLD8 + help + This enables support for UniPhier PH1-Pro5 SoC. -config PFC_MICRO_SUPPORT_CARD - bool "Support card with PFC CPLD" +config ARCH_UNIPHIER_PROXSTREAM2 + bool "UniPhier ProXstream2 SoC" + select UNIPHIER_SMP + depends on !ARCH_UNIPHIER_PH1_SLD3 && \ + !ARCH_UNIPHIER_PH1_LD4 && \ + !ARCH_UNIPHIER_PH1_SLD8 help - This option provides support for the expansion board with PFC - original address mapping. + This enables support for UniPhier ProXstream2 SoC. - Say Y to use the on-board UART, Ether, LED devices. +config ARCH_UNIPHIER_PH1_LD6B + bool "UniPhier PH1-LD6b SoC" + select UNIPHIER_SMP + depends on !ARCH_UNIPHIER_PH1_SLD3 && \ + !ARCH_UNIPHIER_PH1_LD4 && \ + !ARCH_UNIPHIER_PH1_SLD8 + help + This enables support for UniPhier PH1-LD6b SoC. -config DCC_MICRO_SUPPORT_CARD - bool "Support card with DCC CPLD" +config MICRO_SUPPORT_CARD + bool "Use Micro Support Card" help - This option provides support for the expansion board with DCC- - arranged address mapping that is compatible with legacy UniPhier - reference boards. + This option provides support for the expansion board, available + on some UniPhier reference boards. Say Y to use the on-board UART, Ether, LED devices. -endchoice - config CMD_PINMON bool "Enable boot mode pins monitor command" default y @@ -63,22 +82,4 @@ config CMD_DDRPHY_DUMP The command "ddrphy" shows the resulting parameters of DDR PHY training; it is useful for the evaluation of DDR PHY training. -choice - prompt "DDR3 Frequency select" - -config DDR_FREQ_1600 - bool "DDR3 1600" - depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_PRO4 - -config DDR_FREQ_1333 - bool "DDR3 1333" - depends on MACH_PH1_SLD3 || MACH_PH1_LD4 || MACH_PH1_SLD8 - -endchoice - -config DDR_FREQ - int - default 1333 if DDR_FREQ_1333 - default 1600 if DDR_FREQ_1600 - endif diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 103db6d7dc..b597a1352c 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -6,9 +6,12 @@ ifdef CONFIG_SPL_BUILD obj-y += lowlevel_init.o obj-y += init_page_table.o -obj-y += spl.o -obj-y += memconf.o -obj-y += ddrphy_training.o +obj-y += boards.o + +obj-y += init/ bcu/ memconf/ pll/ early-clk/ early-pinctrl/ umc/ ddrphy/ +obj-$(CONFIG_MICRO_SUPPORT_CARD) += sbc/ + +obj-$(CONFIG_DEBUG_LL) += debug_ll.o else @@ -25,14 +28,12 @@ obj-y += cache_uniphier.o obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o obj-$(CONFIG_CMD_DDRPHY_DUMP) += cmd_ddrphy.o +obj-y += pinctrl/ clk/ + endif obj-y += timer.o +obj-y += soc_info.o +obj-y += boot-mode/ -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += support_card.o - -obj-$(CONFIG_MACH_PH1_SLD3) += ph1-sld3/ -obj-$(CONFIG_MACH_PH1_LD4) += ph1-ld4/ -obj-$(CONFIG_MACH_PH1_PRO4) += ph1-pro4/ -obj-$(CONFIG_MACH_PH1_SLD8) += ph1-sld8/ +obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o diff --git a/arch/arm/mach-uniphier/bcu/Makefile b/arch/arm/mach-uniphier/bcu/Makefile new file mode 100644 index 0000000000..5b95bdad95 --- /dev/null +++ b/arch/arm/mach-uniphier/bcu/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += bcu-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += bcu-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += bcu-ph1-ld4.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c b/arch/arm/mach-uniphier/bcu/bcu-ph1-ld4.c index a7bc15e7e0..e9d3761fde 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/bcu_init.c +++ b/arch/arm/mach-uniphier/bcu/bcu-ph1-ld4.c @@ -4,13 +4,13 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <common.h> #include <linux/io.h> #include <mach/bcu-regs.h> +#include <mach/init.h> #define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x)) -void bcu_init(void) +int ph1_ld4_bcu_init(const struct uniphier_board_data *bd) { int shift; @@ -21,7 +21,7 @@ void bcu_init(void) writel(0x11111111, BCSCR5); /* 0xe0000000-0Xffffffff: IPPC/IPPD-bus */ /* Specify DDR channel */ - shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4; + shift = (bd->dram_ch1_base - bd->dram_ch0_base) / 0x04000000 * 4; writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */ shift -= 32; @@ -29,4 +29,6 @@ void bcu_init(void) shift -= 32; writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */ + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c b/arch/arm/mach-uniphier/bcu/bcu-ph1-sld3.c index ccc6897d0a..cb6f862721 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/bcu_init.c +++ b/arch/arm/mach-uniphier/bcu/bcu-ph1-sld3.c @@ -4,13 +4,13 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <common.h> #include <linux/io.h> #include <mach/bcu-regs.h> +#include <mach/init.h> #define ch(x) ((x) >= 32 ? 0 : (x) < 0 ? 0x11111111 : 0x11111111 << (x)) -void bcu_init(void) +int ph1_sld3_bcu_init(const struct uniphier_board_data *bd) { int shift; @@ -25,7 +25,7 @@ void bcu_init(void) writel(0x24440000, BCSCR5); /* Specify DDR channel */ - shift = (CONFIG_SDRAM1_BASE - CONFIG_SDRAM0_BASE) / 0x04000000 * 4; + shift = (bd->dram_ch1_base - bd->dram_ch0_base) / 0x04000000 * 4; writel(ch(shift), BCIPPCCHR2); /* 0x80000000-0x9fffffff */ shift -= 32; @@ -33,4 +33,6 @@ void bcu_init(void) shift -= 32; writel(ch(shift), BCIPPCCHR4); /* 0xc0000000-0xdfffffff */ + + return 0; } diff --git a/arch/arm/mach-uniphier/board_common.c b/arch/arm/mach-uniphier/board_common.c index 5f2d5f6f5b..198004b59b 100644 --- a/arch/arm/mach-uniphier/board_common.c +++ b/arch/arm/mach-uniphier/board_common.c @@ -1,32 +1,15 @@ /* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> -#include <mach/led.h> +#include <mach/micro-support-card.h> -/* - * Routine: board_init - * Description: Early hardware init. - */ int board_init(void) { - led_write(U, B, O, O); + led_puts("Uboo"); return 0; } - -#if CONFIG_NR_DRAM_BANKS >= 2 -void dram_init_banksize(void) -{ - DECLARE_GLOBAL_DATA_PTR; - - gd->bd->bi_dram[0].start = CONFIG_SDRAM0_BASE; - gd->bd->bi_dram[0].size = CONFIG_SDRAM0_SIZE; - gd->bd->bi_dram[1].start = CONFIG_SDRAM1_BASE; - gd->bd->bi_dram[1].size = CONFIG_SDRAM1_SIZE; -} -#endif diff --git a/arch/arm/mach-uniphier/board_early_init_f.c b/arch/arm/mach-uniphier/board_early_init_f.c index 7108740408..5e0d246ce4 100644 --- a/arch/arm/mach-uniphier/board_early_init_f.c +++ b/arch/arm/mach-uniphier/board_early_init_f.c @@ -1,27 +1,72 @@ /* - * Copyright (C) 2012-2015 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ -#include <mach/led.h> -#include <mach/board.h> - -void pin_init(void); -void clkrst_init(void); +#include <mach/init.h> +#include <mach/micro-support-card.h> +#include <mach/soc_info.h> int board_early_init_f(void) { - led_write(U, 0, , ); - - pin_init(); - - led_write(U, 1, , ); + led_puts("U0"); - clkrst_init(); + switch (uniphier_get_soc_type()) { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + case SOC_UNIPHIER_PH1_SLD3: + ph1_sld3_pin_init(); + led_puts("U1"); + ph1_ld4_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) + case SOC_UNIPHIER_PH1_LD4: + ph1_ld4_pin_init(); + led_puts("U1"); + ph1_ld4_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + case SOC_UNIPHIER_PH1_PRO4: + ph1_pro4_pin_init(); + led_puts("U1"); + ph1_pro4_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + case SOC_UNIPHIER_PH1_SLD8: + ph1_sld8_pin_init(); + led_puts("U1"); + ph1_ld4_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + ph1_pro5_pin_init(); + led_puts("U1"); + ph1_pro5_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) + case SOC_UNIPHIER_PROXSTREAM2: + proxstream2_pin_init(); + led_puts("U1"); + proxstream2_clk_init(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + case SOC_UNIPHIER_PH1_LD6B: + ph1_ld6b_pin_init(); + led_puts("U1"); + proxstream2_clk_init(); + break; +#endif + default: + break; + } - led_write(U, 2, , ); + led_puts("U2"); return 0; } diff --git a/arch/arm/mach-uniphier/board_early_init_r.c b/arch/arm/mach-uniphier/board_early_init_r.c index 579fe70463..28c7f82228 100644 --- a/arch/arm/mach-uniphier/board_early_init_r.c +++ b/arch/arm/mach-uniphier/board_early_init_r.c @@ -1,15 +1,14 @@ /* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> -#include <mach/board.h> +#include <mach/micro-support-card.h> int board_early_init_r(void) { - uniphier_board_late_init(); + support_card_late_init(); return 0; } diff --git a/arch/arm/mach-uniphier/boards.c b/arch/arm/mach-uniphier/boards.c new file mode 100644 index 0000000000..812c58ff96 --- /dev/null +++ b/arch/arm/mach-uniphier/boards.c @@ -0,0 +1,130 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <libfdt.h> +#include <linux/kernel.h> +#include <mach/init.h> + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) +static const struct uniphier_board_data ph1_sld3_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x20000000, + .dram_ch0_width = 32, + .dram_ch1_base = 0xc0000000, + .dram_ch1_size = 0x20000000, + .dram_ch1_width = 16, + .dram_ch2_base = 0xc0000000, + .dram_ch2_size = 0x10000000, + .dram_ch2_width = 16, + .dram_freq = 1600, +}; +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) +static const struct uniphier_board_data ph1_ld4_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x10000000, + .dram_ch0_width = 16, + .dram_ch1_base = 0x90000000, + .dram_ch1_size = 0x10000000, + .dram_ch1_width = 16, + .dram_freq = 1600, +}; +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) +static const struct uniphier_board_data ph1_pro4_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x20000000, + .dram_ch0_width = 32, + .dram_ch1_base = 0xa0000000, + .dram_ch1_size = 0x20000000, + .dram_ch1_width = 32, + .dram_freq = 1600, +}; +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) +static const struct uniphier_board_data ph1_sld8_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x10000000, + .dram_ch0_width = 16, + .dram_ch1_base = 0x90000000, + .dram_ch1_size = 0x10000000, + .dram_ch1_width = 16, + .dram_freq = 1333, +}; +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) +static const struct uniphier_board_data ph1_pro5_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x20000000, + .dram_ch0_width = 32, + .dram_ch1_base = 0xa0000000, + .dram_ch1_size = 0x20000000, + .dram_ch1_width = 32, + .dram_freq = 1866, +}; +#endif + +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) +static const struct uniphier_board_data proxstream2_data = { + .dram_ch0_base = 0x80000000, + .dram_ch0_size = 0x40000000, + .dram_ch0_width = 32, + .dram_ch1_base = 0xc0000000, + .dram_ch1_size = 0x20000000, + .dram_ch1_width = 32, + .dram_ch2_base = 0xe0000000, + .dram_ch2_size = 0x20000000, + .dram_ch2_width = 16, + .dram_freq = 1866, +}; +#endif + +struct uniphier_board_id { + const char *compatible; + const struct uniphier_board_data *param; +}; + +static const struct uniphier_board_id uniphier_boards[] = { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + { "socionext,ph1-sld3", &ph1_sld3_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) + { "socionext,ph1-ld4", &ph1_ld4_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + { "socionext,ph1-pro4", &ph1_pro4_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + { "socionext,ph1-sld8", &ph1_sld8_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + { "socionext,ph1-pro5", &ph1_pro5_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) + { "socionext,proxstream2", &proxstream2_data, }, +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + { "socionext,ph1-ld6b", &proxstream2_data, }, +#endif +}; + +const struct uniphier_board_data *uniphier_get_board_param(const void *fdt) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(uniphier_boards); i++) { + if (!fdt_node_check_compatible(fdt, 0, + uniphier_boards[i].compatible)) + return uniphier_boards[i].param; + } + + return NULL; +} diff --git a/arch/arm/mach-uniphier/boot-mode/Makefile b/arch/arm/mach-uniphier/boot-mode/Makefile new file mode 100644 index 0000000000..30c8874905 --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/Makefile @@ -0,0 +1,9 @@ +obj-y += boot-mode.o + +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += boot-mode-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += boot-mode-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += boot-mode-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += boot-mode-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += boot-mode-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += boot-mode-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += boot-mode-proxstream2.o diff --git a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-ld4.c index 54a2510b97..f974d9f08d 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/boot-mode.c +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-ld4.c @@ -44,22 +44,31 @@ struct boot_device_info boot_device_table[] = { {BOOT_DEVICE_NONE, "Reserved"}, {BOOT_DEVICE_NONE, "Reserved"}, {BOOT_DEVICE_NONE, "Reserved"}, - { /* sentinel */ } }; -int get_boot_mode_sel(void) +static int get_boot_mode_sel(void) { return (readl(SG_PINMON0) >> 1) & 0x1f; } -u32 spl_boot_device(void) +u32 ph1_ld4_boot_device(void) { int boot_mode; - if (boot_is_swapped()) - return BOOT_DEVICE_NOR; - boot_mode = get_boot_mode_sel(); return boot_device_table[boot_mode].type; } + +void ph1_ld4_boot_mode_show(void) +{ + int mode_sel, i; + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (i = 0; i < ARRAY_SIZE(boot_device_table); i++) + printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, + boot_device_table[i].info); +} diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c new file mode 100644 index 0000000000..c68cb59fc0 --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-pro5.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/io.h> +#include <mach/boot-device.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +static struct boot_device_info boot_device_table[] = { + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128MB, Addr 4)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 4)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NONE, "Reserved"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128MB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, + { /* sentinel */ } +}; + +static int get_boot_mode_sel(void) +{ + return (readl(SG_PINMON0) >> 1) & 0x1f; +} + +u32 ph1_pro5_boot_device(void) +{ + int boot_mode; + + boot_mode = get_boot_mode_sel(); + + return boot_device_table[boot_mode].type; +} + +void ph1_pro5_boot_mode_show(void) +{ + int mode_sel, i; + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (i = 0; i < ARRAY_SIZE(boot_device_table); i++) + printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, + boot_device_table[i].info); +} diff --git a/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-sld3.c index 40000afe74..c943e12db1 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/boot-mode.c +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-ph1-sld3.c @@ -11,7 +11,7 @@ #include <mach/sg-regs.h> #include <mach/sbc-regs.h> -struct boot_device_info boot_device_table[] = { +static struct boot_device_info boot_device_table[] = { {BOOT_DEVICE_NONE, "Reserved"}, {BOOT_DEVICE_NONE, "External Master"}, {BOOT_DEVICE_NONE, "Reserved"}, @@ -76,22 +76,31 @@ struct boot_device_info boot_device_table[] = { {BOOT_DEVICE_NONE, "Reserved"}, {BOOT_DEVICE_NONE, "Reserved"}, {BOOT_DEVICE_NONE, "Reserved"}, - { /* sentinel */ } }; -int get_boot_mode_sel(void) +static int get_boot_mode_sel(void) { return readl(SG_PINMON0) & 0x3f; } -u32 spl_boot_device(void) +u32 ph1_sld3_boot_device(void) { int boot_mode; - if (boot_is_swapped()) - return BOOT_DEVICE_NOR; - boot_mode = get_boot_mode_sel(); return boot_device_table[boot_mode].type; } + +void ph1_sld3_boot_mode_show(void) +{ + int mode_sel, i; + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (i = 0; i < ARRAY_SIZE(boot_device_table); i++) + printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, + boot_device_table[i].info); +} diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c b/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c new file mode 100644 index 0000000000..10a47c6fcc --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-proxstream2.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/io.h> +#include <mach/boot-device.h> +#include <mach/init.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +static struct boot_device_info boot_device_table[] = { + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 256KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 512KB, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, EraseSize 128KB, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 8, ECC 16, ONFI, Addr 4)"}, + {BOOT_DEVICE_MMC1, "eMMC Boot (1.8V)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 5)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 8, ONFI, Addr 4)"}, + {BOOT_DEVICE_NAND, "NAND (Mirror 1, ECC 16, ONFI, Addr 4)"}, + {BOOT_DEVICE_SPI, "SPI 3Byte CS0"}, + {BOOT_DEVICE_SPI, "SPI 4Byte CS0"}, + {BOOT_DEVICE_SPI, "SPI 3Byte CS1"}, + {BOOT_DEVICE_SPI, "SPI 4Byte CS1"}, + {BOOT_DEVICE_SPI, "SPI 4Byte CS0"}, + {BOOT_DEVICE_SPI, "SPI 3Byte CS0"}, + {BOOT_DEVICE_NONE, "Reserved"}, +}; + +int get_boot_mode_sel(void) +{ + return (readl(SG_PINMON0) >> 1) & 0x1f; +} + +u32 proxstream2_boot_device(void) +{ + int boot_mode; + + boot_mode = get_boot_mode_sel(); + + return boot_device_table[boot_mode].type; +} + +void proxstream2_boot_mode_show(void) +{ + int mode_sel, i; + + mode_sel = get_boot_mode_sel(); + + puts("Boot Mode Pin:\n"); + + for (i = 0; i < ARRAY_SIZE(boot_device_table); i++) + printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, + boot_device_table[i].info); +} diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode.c b/arch/arm/mach-uniphier/boot-mode/boot-mode.c new file mode 100644 index 0000000000..c6cafa7919 --- /dev/null +++ b/arch/arm/mach-uniphier/boot-mode/boot-mode.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/io.h> +#include <mach/boot-device.h> +#include <mach/sbc-regs.h> +#include <mach/soc_info.h> + +u32 spl_boot_device(void) +{ + if (boot_is_swapped()) + return BOOT_DEVICE_NOR; + + switch (uniphier_get_soc_type()) { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + case SOC_UNIPHIER_PH1_SLD3: + return ph1_sld3_boot_device(); +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + case SOC_UNIPHIER_PH1_LD4: + case SOC_UNIPHIER_PH1_PRO4: + case SOC_UNIPHIER_PH1_SLD8: + return ph1_ld4_boot_device(); +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + return ph1_pro5_boot_device(); +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + case SOC_UNIPHIER_PROXSTREAM2: + case SOC_UNIPHIER_PH1_LD6B: + return proxstream2_boot_device(); +#endif + default: + return BOOT_DEVICE_NONE; + } +} diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile new file mode 100644 index 0000000000..4f397b986b --- /dev/null +++ b/arch/arm/mach-uniphier/clk/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += clk-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += clk-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += clk-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += clk-proxstream2.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c b/arch/arm/mach-uniphier/clk/clk-ph1-ld4.c index 2de81f0a56..8b95fbb008 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/clkrst_init.c +++ b/arch/arm/mach-uniphier/clk/clk-ph1-ld4.c @@ -5,9 +5,10 @@ */ #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> -void clkrst_init(void) +void ph1_ld4_clk_init(void) { u32 tmp; diff --git a/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c b/arch/arm/mach-uniphier/clk/clk-ph1-pro4.c index 46cace77e5..2e1b20a423 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c +++ b/arch/arm/mach-uniphier/clk/clk-ph1-pro4.c @@ -5,9 +5,10 @@ */ #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> -void clkrst_init(void) +void ph1_pro4_clk_init(void) { u32 tmp; diff --git a/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c b/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c new file mode 100644 index 0000000000..f78edbbe3f --- /dev/null +++ b/arch/arm/mach-uniphier/clk/clk-ph1-pro5.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> + +void ph1_pro5_clk_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_RSTCTRL_NRST_NAND; +#endif + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp = readl(SC_RSTCTRL2); + tmp |= SC_RSTCTRL2_NRST_USB3B1; + writel(tmp, SC_RSTCTRL2); + readl(SC_RSTCTRL2); /* dummy read */ +#endif + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 | + SC_CLKCTRL_CEN_GIO; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_CLKCTRL_CEN_NAND; +#endif + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/mach-uniphier/clk/clk-proxstream2.c b/arch/arm/mach-uniphier/clk/clk-proxstream2.c new file mode 100644 index 0000000000..b494021ecf --- /dev/null +++ b/arch/arm/mach-uniphier/clk/clk-proxstream2.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> + +void proxstream2_clk_init(void) +{ + u32 tmp; + + /* deassert reset */ + tmp = readl(SC_RSTCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_GIO; +#endif +#ifdef CONFIG_UNIPHIER_ETH + tmp |= SC_RSTCTRL_NRST_ETHER; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_RSTCTRL_NRST_NAND; +#endif + writel(tmp, SC_RSTCTRL); + readl(SC_RSTCTRL); /* dummy read */ + +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp = readl(SC_RSTCTRL2); + tmp |= SC_RSTCTRL2_NRST_USB3B1; + writel(tmp, SC_RSTCTRL2); + readl(SC_RSTCTRL2); /* dummy read */ +#endif + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); +#ifdef CONFIG_USB_XHCI_UNIPHIER + tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 | + SC_CLKCTRL_CEN_GIO; +#endif +#ifdef CONFIG_UNIPHIER_ETH + tmp |= SC_CLKCTRL_CEN_ETHER; +#endif +#ifdef CONFIG_NAND_DENALI + tmp |= SC_CLKCTRL_CEN_NAND; +#endif + writel(tmp, SC_CLKCTRL); + readl(SC_CLKCTRL); /* dummy read */ +} diff --git a/arch/arm/mach-uniphier/cmd_pinmon.c b/arch/arm/mach-uniphier/cmd_pinmon.c index 8be2ed4fe6..b15ee9dd60 100644 --- a/arch/arm/mach-uniphier/cmd_pinmon.c +++ b/arch/arm/mach-uniphier/cmd_pinmon.c @@ -1,6 +1,5 @@ /* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,20 +7,42 @@ #include <common.h> #include <mach/boot-device.h> #include <mach/sbc-regs.h> +#include <mach/soc_info.h> static int do_pinmon(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int mode_sel, i; - printf("Boot Swap: %s\n\n", boot_is_swapped() ? "ON" : "OFF"); - mode_sel = get_boot_mode_sel(); - - puts("Boot Mode Pin:\n"); - - for (i = 0; boot_device_table[i].info; i++) - printf(" %c %02x %s\n", i == mode_sel ? '*' : ' ', i, - boot_device_table[i].info); + switch (uniphier_get_soc_type()) { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + case SOC_UNIPHIER_PH1_SLD3: + ph1_sld3_boot_mode_show(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + case SOC_UNIPHIER_PH1_LD4: + case SOC_UNIPHIER_PH1_PRO4: + case SOC_UNIPHIER_PH1_SLD8: + ph1_ld4_boot_mode_show(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + ph1_pro5_boot_mode_show(); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + case SOC_UNIPHIER_PROXSTREAM2: + case SOC_UNIPHIER_PH1_LD6B: + proxstream2_boot_mode_show(); + break; +#endif + default: + break; + } return 0; } diff --git a/arch/arm/mach-uniphier/ddrphy/Makefile b/arch/arm/mach-uniphier/ddrphy/Makefile new file mode 100644 index 0000000000..e2d109df57 --- /dev/null +++ b/arch/arm/mach-uniphier/ddrphy/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += ddrphy-training.o ddrphy-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += ddrphy-training.o ddrphy-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += ddrphy-training.o ddrphy-ph1-sld8.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-ld4.c index 2add8fa691..991d9294fd 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/ddrphy_init.c +++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-ld4.c @@ -8,7 +8,7 @@ #include <linux/io.h> #include <mach/ddrphy-regs.h> -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +int ph1_ld4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) { u32 tmp; @@ -67,4 +67,6 @@ void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) writel(0x0300C473, &phy->pgcr[1]); writel(0x0000005D, &phy->zq[0].cr[1]); + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-pro4.c index 61ddcf4ec6..bc47ba3280 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/ddrphy_init.c +++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-pro4.c @@ -8,7 +8,7 @@ #include <linux/io.h> #include <mach/ddrphy-regs.h> -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +int ph1_pro4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) { u32 tmp; @@ -67,4 +67,6 @@ void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) writel(0x0300C473, &phy->pgcr[1]); writel(0x0000005D, &phy->zq[0].cr[1]); + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-sld8.c index 21efe62da6..39024a09d5 100644 --- a/arch/arm/mach-uniphier/ph1-sld8/ddrphy_init.c +++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-ph1-sld8.c @@ -9,7 +9,7 @@ #include <linux/io.h> #include <mach/ddrphy-regs.h> -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) +int ph1_sld8_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) { u32 tmp; @@ -72,4 +72,6 @@ void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size) writel(0x0300C473, &phy->pgcr[1]); writel(0x0000005D, &phy->zq[0].cr[1]); + + return 0; } diff --git a/arch/arm/mach-uniphier/ddrphy_training.c b/arch/arm/mach-uniphier/ddrphy/ddrphy-training.c index a98b814df0..a98b814df0 100644 --- a/arch/arm/mach-uniphier/ddrphy_training.c +++ b/arch/arm/mach-uniphier/ddrphy/ddrphy-training.c diff --git a/arch/arm/mach-uniphier/debug_ll.S b/arch/arm/mach-uniphier/debug_ll.S new file mode 100644 index 0000000000..d8c9fe43e3 --- /dev/null +++ b/arch/arm/mach-uniphier/debug_ll.S @@ -0,0 +1,185 @@ +/* + * On-chip UART initializaion for low-level debugging + * + * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/serial_reg.h> +#include <linux/linkage.h> +#include <mach/bcu-regs.h> +#include <mach/sc-regs.h> +#include <mach/sg-regs.h> + +#if !defined(CONFIG_DEBUG_SEMIHOSTING) +#include CONFIG_DEBUG_LL_INCLUDE +#endif + +#define BAUDRATE 115200 +#define DIV_ROUND(x, d) (((x) + ((d) / 2)) / (d)) + +ENTRY(debug_ll_init) + ldr r0, =SG_REVISION + ldr r1, [r0] + and r1, r1, #SG_REVISION_TYPE_MASK + mov r1, r1, lsr #SG_REVISION_TYPE_SHIFT + +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) +#define PH1_SLD3_UART_CLK 36864000 + cmp r1, #0x25 + bne ph1_sld3_end + + sg_set_pinsel 64, 1, 4, 4, r0, r1 @ TXD0 -> TXD0 + + ldr r0, =BCSCR5 + ldr r1, =0x24440000 + str r1, [r0] + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PH1_SLD3_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_sld3_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) +#define PH1_LD4_UART_CLK 36864000 + cmp r1, #0x26 + bne ph1_ld4_end + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + sg_set_pinsel 88, 1, 8, 4, r0, r1 @ HSDOUT6 -> TXD0 + + ldr r3, =DIV_ROUND(PH1_LD4_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_ld4_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) +#define PH1_PRO4_UART_CLK 73728000 + cmp r1, #0x28 + bne ph1_pro4_end + + sg_set_pinsel 128, 0, 4, 8, r0, r1 @ TXD0 -> TXD0 + + ldr r0, =SG_LOADPINCTRL + mov r1, #1 + str r1, [r0] + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PH1_PRO4_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_pro4_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) +#define PH1_SLD8_UART_CLK 80000000 + cmp r1, #0x29 + bne ph1_sld8_end + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + sg_set_pinsel 70, 3, 8, 4, r0, r1 @ HSDOUT0 -> TXD0 + + ldr r3, =DIV_ROUND(PH1_SLD8_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_sld8_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) +#define PH1_PRO5_UART_CLK 73728000 + cmp r1, #0x2A + bne ph1_pro5_end + + sg_set_pinsel 47, 0, 4, 8, r0, r1 @ TXD0 -> TXD0 + sg_set_pinsel 49, 0, 4, 8, r0, r1 @ TXD1 -> TXD1 + sg_set_pinsel 51, 0, 4, 8, r0, r1 @ TXD2 -> TXD2 + sg_set_pinsel 53, 0, 4, 8, r0, r1 @ TXD3 -> TXD3 + + ldr r0, =SG_LOADPINCTRL + mov r1, #1 + str r1, [r0] + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PH1_PRO5_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_pro5_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) +#define PROXSTREAM2_UART_CLK 88900000 + cmp r1, #0x2E + bne proxstream2_end + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + sg_set_pinsel 217, 8, 8, 4, r0, r1 @ TXD0 -> TXD0 + sg_set_pinsel 115, 8, 8, 4, r0, r1 @ TXD1 -> TXD1 + sg_set_pinsel 113, 8, 8, 4, r0, r1 @ TXD2 -> TXD2 + sg_set_pinsel 219, 8, 8, 4, r0, r1 @ TXD3 -> TXD3 + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PROXSTREAM2_UART_CLK, 16 * BAUDRATE) + + b init_uart +proxstream2_end: +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) +#define PH1_LD6B_UART_CLK 88900000 + cmp r1, #0x2F + bne ph1_ld6b_end + + ldr r0, =SG_IECTRL + ldr r1, [r0] + orr r1, r1, #1 + str r1, [r0] + + sg_set_pinsel 135, 3, 8, 4, r0, r1 @ PORT10 -> TXD0 + sg_set_pinsel 115, 0, 8, 4, r0, r1 @ TXD1 -> TXD1 + sg_set_pinsel 113, 2, 8, 4, r0, r1 @ SBO0 -> TXD2 + + ldr r0, =SC_CLKCTRL + ldr r1, [r0] + orr r1, r1, #SC_CLKCTRL_CEN_PERI + str r1, [r0] + + ldr r3, =DIV_ROUND(PH1_LD6B_UART_CLK, 16 * BAUDRATE) + + b init_uart +ph1_ld6b_end: +#endif + +init_uart: + addruart r0, r1, r2 + mov r1, #UART_LCR_WLEN8 << 8 + str r1, [r0, #0x10] + str r3, [r0, #0x24] + + mov pc, lr +ENDPROC(debug_ll_init) diff --git a/arch/arm/mach-uniphier/dram_init.c b/arch/arm/mach-uniphier/dram_init.c index 4b8c938b5e..32cc448aeb 100644 --- a/arch/arm/mach-uniphier/dram_init.c +++ b/arch/arm/mach-uniphier/dram_init.c @@ -1,16 +1,59 @@ /* - * Copyright (C) 2012-2015 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <libfdt.h> +#include <linux/err.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const void *get_memory_reg_prop(const void *fdt, int *lenp) +{ + int offset; + + offset = fdt_path_offset(fdt, "/memory"); + if (offset < 0) + return NULL; + + return fdt_getprop(fdt, offset, "reg", lenp); +} int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + const fdt32_t *val; + int len; + + val = get_memory_reg_prop(gd->fdt_blob, &len); + if (len < sizeof(*val)) + return -EINVAL; + + gd->ram_size = fdt32_to_cpu(*(val + 1)); + + debug("DRAM size = %08lx\n", gd->ram_size); return 0; } + +void dram_init_banksize(void) +{ + const fdt32_t *val; + int len, i; + + val = get_memory_reg_prop(gd->fdt_blob, &len); + if (len < 0) + return; + + len /= sizeof(*val); + len /= 2; + + for (i = 0; i < len; i++) { + gd->bd->bi_dram[i].start = fdt32_to_cpu(*val++); + gd->bd->bi_dram[i].size = fdt32_to_cpu(*val++); + + debug("DRAM bank %d: start = %08lx, size = %08lx\n", + i, gd->bd->bi_dram[i].start, gd->bd->bi_dram[i].size); + } +} diff --git a/arch/arm/mach-uniphier/early-clk/Makefile b/arch/arm/mach-uniphier/early-clk/Makefile new file mode 100644 index 0000000000..393ea96f90 --- /dev/null +++ b/arch/arm/mach-uniphier/early-clk/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += early-clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += early-clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += early-clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += early-clk-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += early-clk-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += early-clk-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += early-clk-proxstream2.o diff --git a/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-ld4.c index 60204b53ba..f646c9b7df 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/early_clkrst_init.c +++ b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-ld4.c @@ -7,9 +7,10 @@ #include <common.h> #include <spl.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> -void early_clkrst_init(void) +int ph1_ld4_early_clk_init(const struct uniphier_board_data *bd) { u32 tmp; @@ -27,4 +28,6 @@ void early_clkrst_init(void) tmp |= SC_CLKCTRL_CEN_UMC | SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI; writel(tmp, SC_CLKCTRL); readl(SC_CLKCTRL); /* dummy read */ + + return 0; } diff --git a/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c new file mode 100644 index 0000000000..007d3b8570 --- /dev/null +++ b/arch/arm/mach-uniphier/early-clk/early-clk-ph1-pro5.c @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> + +int ph1_pro5_early_clk_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + + /* + * deassert reset + * UMCA2: Ch1 (DDR3) + * UMCA1, UMC31: Ch0 (WIO1) + * UMCA0, UMC30: Ch0 (WIO0) + */ + tmp = readl(SC_RSTCTRL4); + tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 | + SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 | + SC_RSTCTRL4_NRST_UMC31 | SC_RSTCTRL4_NRST_UMC30; + writel(tmp, SC_RSTCTRL4); + readl(SC_RSTCTRL); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI; + writel(tmp, SC_CLKCTRL); + tmp = readl(SC_CLKCTRL4); + tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC1 | + SC_CLKCTRL4_CEN_UMC0; + writel(tmp, SC_CLKCTRL4); + readl(SC_CLKCTRL4); /* dummy read */ + + return 0; +} diff --git a/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c b/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c new file mode 100644 index 0000000000..c303f16a57 --- /dev/null +++ b/arch/arm/mach-uniphier/early-clk/early-clk-proxstream2.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sc-regs.h> + +int proxstream2_early_clk_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + + /* deassert reset */ + if (spl_boot_device() != BOOT_DEVICE_NAND) { + tmp = readl(SC_RSTCTRL); + tmp &= ~SC_RSTCTRL_NRST_NAND; + writel(tmp, SC_RSTCTRL); + }; + + tmp = readl(SC_RSTCTRL4); + tmp |= SC_RSTCTRL4_NRST_UMCSB | SC_RSTCTRL4_NRST_UMCA2 | + SC_RSTCTRL4_NRST_UMCA1 | SC_RSTCTRL4_NRST_UMCA0 | + SC_RSTCTRL4_NRST_UMC32 | SC_RSTCTRL4_NRST_UMC31 | + SC_RSTCTRL4_NRST_UMC30; + writel(tmp, SC_RSTCTRL4); + readl(SC_RSTCTRL4); /* dummy read */ + + /* privide clocks */ + tmp = readl(SC_CLKCTRL); + tmp |= SC_CLKCTRL_CEN_SBC | SC_CLKCTRL_CEN_PERI; + writel(tmp, SC_CLKCTRL); + + tmp = readl(SC_CLKCTRL4); + tmp |= SC_CLKCTRL4_CEN_UMCSB | SC_CLKCTRL4_CEN_UMC2 | + SC_CLKCTRL4_CEN_UMC1 | SC_CLKCTRL4_CEN_UMC0; + writel(tmp, SC_CLKCTRL4); + readl(SC_CLKCTRL4); /* dummy read */ + + return 0; +} diff --git a/arch/arm/mach-uniphier/early-pinctrl/Makefile b/arch/arm/mach-uniphier/early-pinctrl/Makefile new file mode 100644 index 0000000000..e497d28f79 --- /dev/null +++ b/arch/arm/mach-uniphier/early-pinctrl/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += early-pinctrl-ph1-sld3.o diff --git a/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c b/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c new file mode 100644 index 0000000000..1bb9375016 --- /dev/null +++ b/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-ph1-sld3.c @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <mach/init.h> +#include <mach/sg-regs.h> + +int ph1_sld3_early_pin_init(const struct uniphier_board_data *bd) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_UNIPHIER_SERIAL + sg_set_pinsel(63, 0, 4, 4); /* RXD0 */ + sg_set_pinsel(64, 1, 4, 4); /* TXD0 */ + + sg_set_pinsel(65, 0, 4, 4); /* RXD1 */ + sg_set_pinsel(66, 1, 4, 4); /* TXD1 */ + + sg_set_pinsel(96, 2, 4, 4); /* RXD2 */ + sg_set_pinsel(102, 2, 4, 4); /* TXD2 */ +#endif + + return 0; +} diff --git a/arch/arm/mach-uniphier/include/mach/board.h b/arch/arm/mach-uniphier/include/mach/board.h deleted file mode 100644 index e3cba5befe..0000000000 --- a/arch/arm/mach-uniphier/include/mach/board.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_BOARD_H -#define ARCH_BOARD_H - -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) || \ - defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -void support_card_reset(void); -void support_card_init(void); -void support_card_late_init(void); -int check_support_card(void); -#else -#define support_card_reset() do {} while (0) -#define support_card_init() do {} while (0) -#define support_card_late_init() do {} while (0) -static inline int check_support_card(void) -{ - return 0; -} -#endif - -static inline void uniphier_board_reset(void) -{ - support_card_reset(); -} - -static inline void uniphier_board_init(void) -{ - support_card_init(); -} - -static inline void uniphier_board_late_init(void) -{ - support_card_late_init(); -} - -#endif /* ARCH_BOARD_H */ diff --git a/arch/arm/mach-uniphier/include/mach/boot-device.h b/arch/arm/mach-uniphier/include/mach/boot-device.h index 7a10f1c5b2..2ab5a535fa 100644 --- a/arch/arm/mach-uniphier/include/mach/boot-device.h +++ b/arch/arm/mach-uniphier/include/mach/boot-device.h @@ -1,6 +1,5 @@ /* - * Copyright (C) 2011-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -8,13 +7,19 @@ #ifndef _ASM_BOOT_DEVICE_H_ #define _ASM_BOOT_DEVICE_H_ -int get_boot_mode_sel(void); - struct boot_device_info { u32 type; char *info; }; -extern struct boot_device_info boot_device_table[]; +u32 ph1_sld3_boot_device(void); +u32 ph1_ld4_boot_device(void); +u32 ph1_pro5_boot_device(void); +u32 proxstream2_boot_device(void); + +void ph1_sld3_boot_mode_show(void); +void ph1_ld4_boot_mode_show(void); +void ph1_pro5_boot_mode_show(void); +void proxstream2_boot_mode_show(void); #endif /* _ASM_BOOT_DEVICE_H_ */ diff --git a/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h b/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h index fce0c01246..adcc972877 100644 --- a/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h +++ b/arch/arm/mach-uniphier/include/mach/ddrphy-regs.h @@ -156,7 +156,8 @@ struct ddrphy { /* SoC-specific parameters */ #define NR_DATX8_PER_DDRPHY 2 -#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) #define NR_DDRPHY_PER_CH 1 #else #define NR_DDRPHY_PER_CH 2 @@ -167,7 +168,9 @@ struct ddrphy { #define DDRPHY_BASE(ch, phy) (0x5bc01000 + 0x200000 * (ch) + 0x1000 * (phy)) #ifndef __ASSEMBLY__ -void ddrphy_init(struct ddrphy __iomem *phy, int freq, int size); +int ph1_ld4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size); +int ph1_pro4_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size); +int ph1_sld8_ddrphy_init(struct ddrphy __iomem *phy, int freq, int size); void ddrphy_prepare_training(struct ddrphy __iomem *phy, int rank); int ddrphy_training(struct ddrphy __iomem *phy); #endif diff --git a/arch/arm/mach-uniphier/include/mach/debug-uart.S b/arch/arm/mach-uniphier/include/mach/debug-uart.S deleted file mode 100644 index d2b431f544..0000000000 --- a/arch/arm/mach-uniphier/include/mach/debug-uart.S +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/serial_reg.h> - -#if !defined(CONFIG_DEBUG_SEMIHOSTING) -#include CONFIG_DEBUG_LL_INCLUDE -#endif - -#define BAUDRATE 115200 -#define DIV_ROUND(x, d) (((x) + ((d) / 2)) / (d)) -#define DIVISOR DIV_ROUND(UART_CLK, 16 * BAUDRATE) - - .macro init_debug_uart, ra, rb, rc - addruart \ra, \rb, \rc - mov \rb, #UART_LCR_WLEN8 << 8 - str \rb, [\ra, #0x10] - ldr \rb, =DIVISOR - str \rb, [\ra, #0x24] - .endm diff --git a/arch/arm/mach-uniphier/include/mach/init.h b/arch/arm/mach-uniphier/include/mach/init.h new file mode 100644 index 0000000000..5108eddfc4 --- /dev/null +++ b/arch/arm/mach-uniphier/include/mach/init.h @@ -0,0 +1,99 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MACH_INIT_H +#define __MACH_INIT_H + +struct uniphier_board_data { + unsigned long dram_ch0_base; + unsigned long dram_ch0_size; + unsigned long dram_ch0_width; + unsigned long dram_ch1_base; + unsigned long dram_ch1_size; + unsigned long dram_ch1_width; + unsigned long dram_ch2_base; + unsigned long dram_ch2_size; + unsigned long dram_ch2_width; + unsigned int dram_freq; +}; + +const struct uniphier_board_data *uniphier_get_board_param(const void *fdt); + +int ph1_sld3_init(const struct uniphier_board_data *bd); +int ph1_ld4_init(const struct uniphier_board_data *bd); +int ph1_pro4_init(const struct uniphier_board_data *bd); +int ph1_sld8_init(const struct uniphier_board_data *bd); +int ph1_pro5_init(const struct uniphier_board_data *bd); +int proxstream2_init(const struct uniphier_board_data *bd); + +#if defined(CONFIG_MICRO_SUPPORT_CARD) +int ph1_sld3_sbc_init(const struct uniphier_board_data *bd); +int ph1_ld4_sbc_init(const struct uniphier_board_data *bd); +int ph1_pro4_sbc_init(const struct uniphier_board_data *bd); +int proxstream2_sbc_init(const struct uniphier_board_data *bd); +#else +static inline int ph1_sld3_sbc_init(const struct uniphier_board_data *bd) +{ + return 0; +} + +static inline int ph1_ld4_sbc_init(const struct uniphier_board_data *bd) +{ + return 0; +} + +static inline int ph1_pro4_sbc_init(const struct uniphier_board_data *bd) +{ + return 0; +} + +static inline int proxstream2_sbc_init(const struct uniphier_board_data *bd) +{ + return 0; +} +#endif + +int ph1_sld3_bcu_init(const struct uniphier_board_data *bd); +int ph1_ld4_bcu_init(const struct uniphier_board_data *bd); + +int memconf_init(const struct uniphier_board_data *bd); +int ph1_sld3_memconf_init(const struct uniphier_board_data *bd); +int proxstream2_memconf_init(const struct uniphier_board_data *bd); + +int ph1_sld3_pll_init(const struct uniphier_board_data *bd); +int ph1_ld4_pll_init(const struct uniphier_board_data *bd); +int ph1_pro4_pll_init(const struct uniphier_board_data *bd); +int ph1_sld8_pll_init(const struct uniphier_board_data *bd); + +int ph1_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd); +int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd); + +int ph1_ld4_early_clk_init(const struct uniphier_board_data *bd); +int ph1_pro5_early_clk_init(const struct uniphier_board_data *bd); +int proxstream2_early_clk_init(const struct uniphier_board_data *bd); + +int ph1_sld3_early_pin_init(const struct uniphier_board_data *bd); + +int ph1_ld4_umc_init(const struct uniphier_board_data *bd); +int ph1_pro4_umc_init(const struct uniphier_board_data *bd); +int ph1_sld8_umc_init(const struct uniphier_board_data *bd); + +void ph1_sld3_pin_init(void); +void ph1_ld4_pin_init(void); +void ph1_pro4_pin_init(void); +void ph1_sld8_pin_init(void); +void ph1_pro5_pin_init(void); +void proxstream2_pin_init(void); +void ph1_ld6b_pin_init(void); + +void ph1_ld4_clk_init(void); +void ph1_pro4_clk_init(void); +void ph1_pro5_clk_init(void); +void proxstream2_clk_init(void); + +#define pr_err(fmt, args...) printf(fmt, ##args) + +#endif /* __MACH_INIT_H */ diff --git a/arch/arm/mach-uniphier/include/mach/led.h b/arch/arm/mach-uniphier/include/mach/led.h deleted file mode 100644 index f7749b4860..0000000000 --- a/arch/arm/mach-uniphier/include/mach/led.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_LED_H -#define ARCH_LED_H - -#include <config.h> - -#define LED_CHAR_0 0x7e -#define LED_CHAR_1 0x0c -#define LED_CHAR_2 0xb6 -#define LED_CHAR_3 0x9e -#define LED_CHAR_4 0xcc -#define LED_CHAR_5 0xda -#define LED_CHAR_6 0xfa -#define LED_CHAR_7 0x4e -#define LED_CHAR_8 0xfe -#define LED_CHAR_9 0xde - -#define LED_CHAR_A 0xee -#define LED_CHAR_B 0xf8 -#define LED_CHAR_C 0x72 -#define LED_CHAR_D 0xbc -#define LED_CHAR_E 0xf2 -#define LED_CHAR_F 0xe2 -#define LED_CHAR_G 0x7a -#define LED_CHAR_H 0xe8 -#define LED_CHAR_I 0x08 -#define LED_CHAR_J 0x3c -#define LED_CHAR_K 0xea -#define LED_CHAR_L 0x70 -#define LED_CHAR_M 0x6e -#define LED_CHAR_N 0xa8 -#define LED_CHAR_O 0xb8 -#define LED_CHAR_P 0xe6 -#define LED_CHAR_Q 0xce -#define LED_CHAR_R 0xa0 -#define LED_CHAR_S 0xc8 -#define LED_CHAR_T 0x8c -#define LED_CHAR_U 0x7c -#define LED_CHAR_V 0x54 -#define LED_CHAR_W 0xfc -#define LED_CHAR_X 0xec -#define LED_CHAR_Y 0xdc -#define LED_CHAR_Z 0xa4 - -#define LED_CHAR_SPACE 0x00 -#define LED_CHAR_DOT 0x01 - -#define LED_CHAR_ (LED_CHAR_SPACE) - -/** Macro to translate 4 characters into integer to display led */ -#define LED_C2I(C0, C1, C2, C3) \ - (~( \ - (LED_CHAR_##C0 << 24) | \ - (LED_CHAR_##C1 << 16) | \ - (LED_CHAR_##C2 << 8) | \ - (LED_CHAR_##C3) \ - )) - -#if defined(CONFIG_SUPPORT_CARD_LED_BASE) - -#define LED_ADDR CONFIG_SUPPORT_CARD_LED_BASE - -#ifdef __ASSEMBLY__ - -#define led_write(C0, C1, C2, C3) raw_led_write LED_C2I(C0, C1, C2, C3) -.macro raw_led_write data - ldr r0, =\data - ldr r1, =LED_ADDR - str r0, [r1] -.endm - -#else /* __ASSEMBLY__ */ - -#include <linux/io.h> - -#define led_write(C0, C1, C2, C3) \ -do { \ - raw_led_write(LED_C2I(C0, C1, C2, C3)); \ -} while (0) - -static inline void raw_led_write(u32 data) -{ - writel(data, LED_ADDR); -} - -#endif /* __ASSEMBLY__ */ - -#else /* CONFIG_SUPPORT_CARD_LED_BASE */ - -#define led_write(C0, C1, C2, C3) -#define raw_led_write(x) - -#endif /* CONFIG_SUPPORT_CARD_LED_BASE */ - -#endif /* ARCH_LED_H */ diff --git a/arch/arm/mach-uniphier/include/mach/micro-support-card.h b/arch/arm/mach-uniphier/include/mach/micro-support-card.h new file mode 100644 index 0000000000..5da0ada726 --- /dev/null +++ b/arch/arm/mach-uniphier/include/mach/micro-support-card.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_BOARD_H +#define ARCH_BOARD_H + +#if defined(CONFIG_MICRO_SUPPORT_CARD) +void support_card_reset(void); +void support_card_init(void); +void support_card_late_init(void); +int check_support_card(void); +void led_puts(const char *s); +#else +static inline void support_card_reset(void) +{ +} + +static inline void support_card_init(void) +{ +} + +static inline void support_card_late_init(void) +{ +} + +static inline int check_support_card(void) +{ + return 0; +} + +static inline void led_puts(const char *s) +{ +} +#endif + +#endif /* ARCH_BOARD_H */ diff --git a/arch/arm/mach-uniphier/include/mach/platdevice.h b/arch/arm/mach-uniphier/include/mach/platdevice.h deleted file mode 100644 index cdf7d132d4..0000000000 --- a/arch/arm/mach-uniphier/include/mach/platdevice.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef ARCH_PLATDEVICE_H -#define ARCH_PLATDEVICE_H - -#include <dm/platdata.h> -#include <dm/platform_data/serial-uniphier.h> - -#define SERIAL_DEVICE(n, ba, clk) \ -static struct uniphier_serial_platform_data serial_device##n = { \ - .base = ba, \ - .uartclk = clk \ -}; \ -U_BOOT_DEVICE(serial##n) = { \ - .name = DRIVER_NAME, \ - .platdata = &serial_device##n \ -}; - -#endif /* ARCH_PLATDEVICE_H */ diff --git a/arch/arm/mach-uniphier/include/mach/sc-regs.h b/arch/arm/mach-uniphier/include/mach/sc-regs.h index df50294077..474b82d243 100644 --- a/arch/arm/mach-uniphier/include/mach/sc-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sc-regs.h @@ -9,12 +9,16 @@ #ifndef ARCH_SC_REGS_H #define ARCH_SC_REGS_H -#if defined(CONFIG_MACH_PH1_SLD3) +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) #define SC_BASE_ADDR 0xf1840000 #else #define SC_BASE_ADDR 0x61840000 #endif +#define SC_DPLLOSCCTRL (SC_BASE_ADDR | 0x1110) +#define SC_DPLLOSCCTRL_DPLLST (0x1 << 1) +#define SC_DPLLOSCCTRL_DPLLEN (0x1 << 0) + #define SC_DPLLCTRL (SC_BASE_ADDR | 0x1200) #define SC_DPLLCTRL_SSC_EN (0x1 << 31) #define SC_DPLLCTRL_FOUTMODE_MASK (0xf << 16) @@ -43,6 +47,7 @@ #define SC_RSTCTRL_NRST_ETHER (0x1 << 12) #define SC_RSTCTRL_NRST_STDMAC (0x1 << 10) #define SC_RSTCTRL_NRST_GIO (0x1 << 6) +/* Pro4 or older */ #define SC_RSTCTRL_NRST_UMC1 (0x1 << 5) #define SC_RSTCTRL_NRST_UMC0 (0x1 << 4) #define SC_RSTCTRL_NRST_NAND (0x1 << 2) @@ -53,6 +58,16 @@ #define SC_RSTCTRL3 (SC_BASE_ADDR | 0x2008) +/* Pro5 or newer */ +#define SC_RSTCTRL4 (SC_BASE_ADDR | 0x200c) +#define SC_RSTCTRL4_NRST_UMCSB (0x1 << 12) /* UMC system bus */ +#define SC_RSTCTRL4_NRST_UMCA2 (0x1 << 10) /* UMC ch2 standby */ +#define SC_RSTCTRL4_NRST_UMCA1 (0x1 << 9) /* UMC ch1 standby */ +#define SC_RSTCTRL4_NRST_UMCA0 (0x1 << 8) /* UMC ch0 standby */ +#define SC_RSTCTRL4_NRST_UMC32 (0x1 << 6) /* UMC ch2 */ +#define SC_RSTCTRL4_NRST_UMC31 (0x1 << 5) /* UMC ch1 */ +#define SC_RSTCTRL4_NRST_UMC30 (0x1 << 4) /* UMC ch0 */ + #define SC_CLKCTRL (SC_BASE_ADDR | 0x2104) #define SC_CLKCTRL_CEN_USB31 (0x1 << 17) /* USB3 #1 */ #define SC_CLKCTRL_CEN_USB30 (0x1 << 16) /* USB3 #0 */ @@ -60,11 +75,19 @@ #define SC_CLKCTRL_CEN_MIO (0x1 << 11) #define SC_CLKCTRL_CEN_STDMAC (0x1 << 10) #define SC_CLKCTRL_CEN_GIO (0x1 << 6) +/* Pro4 or older */ #define SC_CLKCTRL_CEN_UMC (0x1 << 4) #define SC_CLKCTRL_CEN_NAND (0x1 << 2) #define SC_CLKCTRL_CEN_SBC (0x1 << 1) #define SC_CLKCTRL_CEN_PERI (0x1 << 0) +/* Pro5 or newer */ +#define SC_CLKCTRL4 (SC_BASE_ADDR | 0x210c) +#define SC_CLKCTRL4_CEN_UMCSB (0x1 << 12) /* UMC system bus */ +#define SC_CLKCTRL4_CEN_UMC2 (0x1 << 2) /* UMC ch2 */ +#define SC_CLKCTRL4_CEN_UMC1 (0x1 << 1) /* UMC ch1 */ +#define SC_CLKCTRL4_CEN_UMC0 (0x1 << 0) /* UMC ch0 */ + /* System reset control register */ #define SC_IRQTIMSET (SC_BASE_ADDR | 0x3000) #define SC_SLFRSTSEL (SC_BASE_ADDR | 0x3010) diff --git a/arch/arm/mach-uniphier/include/mach/sg-regs.h b/arch/arm/mach-uniphier/include/mach/sg-regs.h index 43a6c35339..678d437fc9 100644 --- a/arch/arm/mach-uniphier/include/mach/sg-regs.h +++ b/arch/arm/mach-uniphier/include/mach/sg-regs.h @@ -25,53 +25,43 @@ /* Memory Configuration */ #define SG_MEMCONF (SG_CTRL_BASE | 0x0400) +#define SG_MEMCONF_CH0_SZ_MASK ((0x1 << 10) | (0x03 << 0)) #define SG_MEMCONF_CH0_SZ_64M ((0x0 << 10) | (0x01 << 0)) #define SG_MEMCONF_CH0_SZ_128M ((0x0 << 10) | (0x02 << 0)) #define SG_MEMCONF_CH0_SZ_256M ((0x0 << 10) | (0x03 << 0)) #define SG_MEMCONF_CH0_SZ_512M ((0x1 << 10) | (0x00 << 0)) #define SG_MEMCONF_CH0_SZ_1G ((0x1 << 10) | (0x01 << 0)) +#define SG_MEMCONF_CH0_NUM_MASK (0x1 << 8) #define SG_MEMCONF_CH0_NUM_1 (0x1 << 8) #define SG_MEMCONF_CH0_NUM_2 (0x0 << 8) +#define SG_MEMCONF_CH1_SZ_MASK ((0x1 << 11) | (0x03 << 2)) #define SG_MEMCONF_CH1_SZ_64M ((0x0 << 11) | (0x01 << 2)) #define SG_MEMCONF_CH1_SZ_128M ((0x0 << 11) | (0x02 << 2)) #define SG_MEMCONF_CH1_SZ_256M ((0x0 << 11) | (0x03 << 2)) #define SG_MEMCONF_CH1_SZ_512M ((0x1 << 11) | (0x00 << 2)) #define SG_MEMCONF_CH1_SZ_1G ((0x1 << 11) | (0x01 << 2)) +#define SG_MEMCONF_CH1_NUM_MASK (0x1 << 9) #define SG_MEMCONF_CH1_NUM_1 (0x1 << 9) #define SG_MEMCONF_CH1_NUM_2 (0x0 << 9) +#define SG_MEMCONF_CH2_SZ_MASK ((0x1 << 26) | (0x03 << 16)) #define SG_MEMCONF_CH2_SZ_64M ((0x0 << 26) | (0x01 << 16)) #define SG_MEMCONF_CH2_SZ_128M ((0x0 << 26) | (0x02 << 16)) #define SG_MEMCONF_CH2_SZ_256M ((0x0 << 26) | (0x03 << 16)) #define SG_MEMCONF_CH2_SZ_512M ((0x1 << 26) | (0x00 << 16)) +#define SG_MEMCONF_CH2_NUM_MASK (0x1 << 24) #define SG_MEMCONF_CH2_NUM_1 (0x1 << 24) #define SG_MEMCONF_CH2_NUM_2 (0x0 << 24) +/* PH1-LD6b, ProXstream2 only */ +#define SG_MEMCONF_CH2_DISABLE (0x1 << 21) #define SG_MEMCONF_SPARSEMEM (0x1 << 4) /* Pin Control */ #define SG_PINCTRL_BASE (SG_CTRL_BASE | 0x1000) -#if defined(CONFIG_MACH_PH1_PRO4) -# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 8) -#elif defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_LD4) || \ - defined(CONFIG_MACH_PH1_SLD8) -# define SG_PINCTRL(n) (SG_PINCTRL_BASE + (n) * 4) -#endif - -#if defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_PRO4) -#define SG_PINSELBITS 4 -#elif defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8) -#define SG_PINSELBITS 8 -#endif - -#define SG_PINSEL_ADDR(n) (SG_PINCTRL((n) * (SG_PINSELBITS) / 32)) -#define SG_PINSEL_MASK(n) (~(((1 << (SG_PINSELBITS)) - 1) << \ - ((n) * (SG_PINSELBITS) % 32))) -#define SG_PINSEL_MODE(n, mode) ((mode) << ((n) * (SG_PINSELBITS) % 32)) - -/* Only for PH1-Pro4 */ +/* PH1-Pro4, PH1-Pro5 */ #define SG_LOADPINCTRL (SG_CTRL_BASE | 0x1700) /* Input Enable */ @@ -98,11 +88,11 @@ #ifdef __ASSEMBLY__ - .macro set_pinsel, n, value, ra, rd - ldr \ra, =SG_PINSEL_ADDR(\n) + .macro sg_set_pinsel, pin, muxval, mux_bits, reg_stride, ra, rd + ldr \ra, =(SG_PINCTRL_BASE + \pin * \mux_bits / 32 * \reg_stride) ldr \rd, [\ra] - and \rd, \rd, #SG_PINSEL_MASK(\n) - orr \rd, \rd, #SG_PINSEL_MODE(\n, \value) + and \rd, \rd, #~(((1 << \mux_bits) - 1) << (\pin * \mux_bits % 32)) + orr \rd, \rd, #(\muxval << (\pin * \mux_bits % 32)) str \rd, [\ra] .endm @@ -111,10 +101,18 @@ #include <linux/types.h> #include <linux/io.h> -static inline void sg_set_pinsel(int n, int value) +static inline void sg_set_pinsel(unsigned pin, unsigned muxval, + unsigned mux_bits, unsigned reg_stride) { - writel((readl(SG_PINSEL_ADDR(n)) & SG_PINSEL_MASK(n)) - | SG_PINSEL_MODE(n, value), SG_PINSEL_ADDR(n)); + unsigned shift = pin * mux_bits % 32; + unsigned reg = SG_PINCTRL_BASE + pin * mux_bits / 32 * reg_stride; + u32 mask = (1U << mux_bits) - 1; + u32 tmp; + + tmp = readl(reg); + tmp &= ~(mask << shift); + tmp |= (mask & muxval) << shift; + writel(tmp, reg); } #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/mach-uniphier/include/mach/soc_info.h b/arch/arm/mach-uniphier/include/mach/soc_info.h new file mode 100644 index 0000000000..623e7ef20e --- /dev/null +++ b/arch/arm/mach-uniphier/include/mach/soc_info.h @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MACH_SOC_INFO_H__ +#define __MACH_SOC_INFO_H__ + +enum uniphier_soc_id { + SOC_UNIPHIER_PH1_SLD3, + SOC_UNIPHIER_PH1_LD4, + SOC_UNIPHIER_PH1_PRO4, + SOC_UNIPHIER_PH1_SLD8, + SOC_UNIPHIER_PH1_PRO5, + SOC_UNIPHIER_PROXSTREAM2, + SOC_UNIPHIER_PH1_LD6B, + SOC_UNIPHIER_UNKNOWN, +}; + +#define UNIPHIER_NR_ENABLED_SOCS \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_LD4) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) + \ + IS_ENABLED(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + +#define UNIPHIER_MULTI_SOC ((UNIPHIER_NR_ENABLED_SOCS) > 1) + +#if UNIPHIER_MULTI_SOC +enum uniphier_soc_id uniphier_get_soc_type(void); +#else +static inline enum uniphier_soc_id uniphier_get_soc_type(void) +{ +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + return SOC_UNIPHIER_PH1_SLD3; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) + return SOC_UNIPHIER_PH1_LD4; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + return SOC_UNIPHIER_PH1_PRO4; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + return SOC_UNIPHIER_PH1_SLD8; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + return SOC_UNIPHIER_PH1_PRO5; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) + return SOC_UNIPHIER_PROXSTREAM2; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + return SOC_UNIPHIER_PH1_LD6B; +#endif + + return SOC_UNIPHIER_UNKNOWN; +} +#endif + +#endif /* __MACH_SOC_INFO_H__ */ diff --git a/arch/arm/mach-uniphier/init/Makefile b/arch/arm/mach-uniphier/init/Makefile new file mode 100644 index 0000000000..98833b55de --- /dev/null +++ b/arch/arm/mach-uniphier/init/Makefile @@ -0,0 +1,9 @@ +obj-y += init.o + +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += init-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += init-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += init-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += init-ph1-sld8.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += init-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += init-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += init-proxstream2.o diff --git a/arch/arm/mach-uniphier/init/init-ph1-ld4.c b/arch/arm/mach-uniphier/init/init-ph1-ld4.c new file mode 100644 index 0000000000..8d0ef0389e --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-ld4.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/compiler.h> +#include <mach/init.h> +#include <mach/micro-support-card.h> + +int ph1_ld4_init(const struct uniphier_board_data *bd) +{ + ph1_ld4_bcu_init(bd); + + ph1_ld4_sbc_init(bd); + + support_card_reset(); + + ph1_ld4_pll_init(bd); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + + led_puts("L1"); + + ph1_ld4_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + { + int res; + + res = ph1_ld4_umc_init(bd); + if (res < 0) { + while (1) + ; + } + } + + led_puts("L5"); + + ph1_ld4_enable_dpll_ssc(bd); + + led_puts("L6"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init-ph1-pro4.c b/arch/arm/mach-uniphier/init/init-ph1-pro4.c new file mode 100644 index 0000000000..b9ce08d88f --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-pro4.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/compiler.h> +#include <mach/init.h> +#include <mach/micro-support-card.h> + +int ph1_pro4_init(const struct uniphier_board_data *bd) +{ + ph1_pro4_sbc_init(bd); + + support_card_reset(); + + ph1_pro4_pll_init(bd); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + + led_puts("L1"); + + ph1_ld4_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + { + int res; + + res = ph1_pro4_umc_init(bd); + if (res < 0) { + while (1) + ; + } + } + + led_puts("L5"); + + ph1_ld4_enable_dpll_ssc(bd); + + led_puts("L6"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init-ph1-pro5.c b/arch/arm/mach-uniphier/init/init-ph1-pro5.c new file mode 100644 index 0000000000..92b3f21d93 --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-pro5.c @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/compiler.h> +#include <mach/init.h> +#include <mach/micro-support-card.h> + +int ph1_pro5_init(const struct uniphier_board_data *bd) +{ + ph1_pro4_sbc_init(bd); + + support_card_reset(); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + + led_puts("L1"); + + ph1_pro5_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + led_puts("L5"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init-ph1-sld3.c b/arch/arm/mach-uniphier/init/init-ph1-sld3.c new file mode 100644 index 0000000000..1146fdab97 --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-sld3.c @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/compiler.h> +#include <mach/init.h> +#include <mach/micro-support-card.h> + +int ph1_sld3_init(const struct uniphier_board_data *bd) +{ + ph1_sld3_bcu_init(bd); + + ph1_sld3_sbc_init(bd); + + support_card_reset(); + + ph1_sld3_pll_init(bd); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + ph1_sld3_memconf_init(bd); + + led_puts("L1"); + + ph1_ld4_early_clk_init(bd); + + led_puts("L2"); + + ph1_sld3_early_pin_init(bd); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + led_puts("L5"); + + ph1_sld3_enable_dpll_ssc(bd); + + led_puts("L6"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init-ph1-sld8.c b/arch/arm/mach-uniphier/init/init-ph1-sld8.c new file mode 100644 index 0000000000..741e88c212 --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-ph1-sld8.c @@ -0,0 +1,60 @@ +/* + * Copyright (C) 2013-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/compiler.h> +#include <mach/init.h> +#include <mach/micro-support-card.h> + +int ph1_sld8_init(const struct uniphier_board_data *bd) +{ + ph1_ld4_bcu_init(bd); + + ph1_ld4_sbc_init(bd); + + support_card_reset(); + + ph1_sld8_pll_init(bd); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + + led_puts("L1"); + + ph1_ld4_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + { + int res; + + res = ph1_sld8_umc_init(bd); + if (res < 0) { + while (1) + ; + } + } + + led_puts("L5"); + + ph1_ld4_enable_dpll_ssc(bd); + + led_puts("L6"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init-proxstream2.c b/arch/arm/mach-uniphier/init/init-proxstream2.c new file mode 100644 index 0000000000..8d03b8f86a --- /dev/null +++ b/arch/arm/mach-uniphier/init/init-proxstream2.c @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <linux/compiler.h> +#include <mach/init.h> +#include <mach/micro-support-card.h> + +int proxstream2_init(const struct uniphier_board_data *bd) +{ + proxstream2_sbc_init(bd); + + support_card_reset(); + + support_card_init(); + + led_puts("L0"); + + memconf_init(bd); + proxstream2_memconf_init(bd); + + led_puts("L1"); + + proxstream2_early_clk_init(bd); + + led_puts("L2"); + + led_puts("L3"); + +#ifdef CONFIG_SPL_SERIAL_SUPPORT + preloader_console_init(); +#endif + + led_puts("L4"); + + return 0; +} diff --git a/arch/arm/mach-uniphier/init/init.c b/arch/arm/mach-uniphier/init/init.c new file mode 100644 index 0000000000..bbfc8e5e08 --- /dev/null +++ b/arch/arm/mach-uniphier/init/init.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <mach/init.h> +#include <mach/soc_info.h> + +DECLARE_GLOBAL_DATA_PTR; + +void spl_board_init(void) +{ + const struct uniphier_board_data *param; + + param = uniphier_get_board_param(gd->fdt_blob); + if (!param) + hang(); + + switch (uniphier_get_soc_type()) { +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3) + case SOC_UNIPHIER_PH1_SLD3: + ph1_sld3_init(param); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4) + case SOC_UNIPHIER_PH1_LD4: + ph1_ld4_init(param); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4) + case SOC_UNIPHIER_PH1_PRO4: + ph1_pro4_init(param); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8) + case SOC_UNIPHIER_PH1_SLD8: + ph1_sld8_init(param); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5) + case SOC_UNIPHIER_PH1_PRO5: + ph1_pro5_init(param); + break; +#endif +#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) || \ + defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B) + case SOC_UNIPHIER_PROXSTREAM2: + case SOC_UNIPHIER_PH1_LD6B: + proxstream2_init(param); + break; +#endif + default: + break; + } +} diff --git a/arch/arm/mach-uniphier/init_page_table.S b/arch/arm/mach-uniphier/init_page_table.S index ac2959a17d..2d3ad15c6e 100644 --- a/arch/arm/mach-uniphier/init_page_table.S +++ b/arch/arm/mach-uniphier/init_page_table.S @@ -1,7 +1,5 @@ /* - * Copyright (C) 2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -23,7 +21,7 @@ ENTRY(init_page_table) section = 0 .rept NR_SECTIONS - .if section == TEXT_SECTION || section == STACK_SECTION + .if section == 0 || section == 1 || section == STACK_SECTION attr = NORMAL .else attr = DEVICE diff --git a/arch/arm/mach-uniphier/lowlevel_init.S b/arch/arm/mach-uniphier/lowlevel_init.S index fd34a4a321..66cad42dde 100644 --- a/arch/arm/mach-uniphier/lowlevel_init.S +++ b/arch/arm/mach-uniphier/lowlevel_init.S @@ -8,7 +8,6 @@ #include <linux/linkage.h> #include <linux/sizes.h> #include <asm/system.h> -#include <mach/led.h> #include <mach/arm-mpcore.h> #include <mach/sbc-regs.h> #include <mach/ssc-regs.h> @@ -28,7 +27,7 @@ ENTRY(lowlevel_init) mcr p15, 0, r0, c1, c0, 0 #ifdef CONFIG_DEBUG_LL - bl setup_lowlevel_debug + bl debug_ll_init #endif /* diff --git a/arch/arm/mach-uniphier/memconf.c b/arch/arm/mach-uniphier/memconf.c deleted file mode 100644 index 59ed0b5dd8..0000000000 --- a/arch/arm/mach-uniphier/memconf.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/sizes.h> -#include <linux/io.h> -#include <mach/sg-regs.h> - -static inline u32 sg_memconf_val_ch0(unsigned long size, int num) -{ - int size_mb = size / num; - u32 ret; - - switch (size_mb) { - case SZ_64M: - ret = SG_MEMCONF_CH0_SZ_64M; - break; - case SZ_128M: - ret = SG_MEMCONF_CH0_SZ_128M; - break; - case SZ_256M: - ret = SG_MEMCONF_CH0_SZ_256M; - break; - case SZ_512M: - ret = SG_MEMCONF_CH0_SZ_512M; - break; - case SZ_1G: - ret = SG_MEMCONF_CH0_SZ_1G; - break; - default: - BUG(); - break; - } - - switch (num) { - case 1: - ret |= SG_MEMCONF_CH0_NUM_1; - break; - case 2: - ret |= SG_MEMCONF_CH0_NUM_2; - break; - default: - BUG(); - break; - } - return ret; -} - -static inline u32 sg_memconf_val_ch1(unsigned long size, int num) -{ - int size_mb = size / num; - u32 ret; - - switch (size_mb) { - case SZ_64M: - ret = SG_MEMCONF_CH1_SZ_64M; - break; - case SZ_128M: - ret = SG_MEMCONF_CH1_SZ_128M; - break; - case SZ_256M: - ret = SG_MEMCONF_CH1_SZ_256M; - break; - case SZ_512M: - ret = SG_MEMCONF_CH1_SZ_512M; - break; - case SZ_1G: - ret = SG_MEMCONF_CH1_SZ_1G; - break; - default: - BUG(); - break; - } - - switch (num) { - case 1: - ret |= SG_MEMCONF_CH1_NUM_1; - break; - case 2: - ret |= SG_MEMCONF_CH1_NUM_2; - break; - default: - BUG(); - break; - } - return ret; -} - -void memconf_init(void) -{ - u32 tmp; - - /* Set DDR size */ - tmp = sg_memconf_val_ch0(CONFIG_SDRAM0_SIZE, CONFIG_DDR_NUM_CH0); - tmp |= sg_memconf_val_ch1(CONFIG_SDRAM1_SIZE, CONFIG_DDR_NUM_CH1); -#if CONFIG_SDRAM0_BASE + CONFIG_SDRAM0_SIZE < CONFIG_SDRAM1_BASE - tmp |= SG_MEMCONF_SPARSEMEM; -#endif - writel(tmp, SG_MEMCONF); -} diff --git a/arch/arm/mach-uniphier/memconf/Makefile b/arch/arm/mach-uniphier/memconf/Makefile new file mode 100644 index 0000000000..42057a2077 --- /dev/null +++ b/arch/arm/mach-uniphier/memconf/Makefile @@ -0,0 +1,4 @@ +obj-y += memconf.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += memconf-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += memconf-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += memconf-proxstream2.o diff --git a/arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c b/arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c new file mode 100644 index 0000000000..e13f56d1dc --- /dev/null +++ b/arch/arm/mach-uniphier/memconf/memconf-ph1-sld3.c @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/sizes.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +int ph1_sld3_memconf_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + unsigned long size_per_word; + + tmp = readl(SG_MEMCONF); + + tmp &= ~(SG_MEMCONF_CH2_SZ_MASK | SG_MEMCONF_CH2_NUM_MASK); + + switch (bd->dram_ch2_width) { + case 16: + tmp |= SG_MEMCONF_CH2_NUM_1; + size_per_word = bd->dram_ch2_size; + break; + case 32: + tmp |= SG_MEMCONF_CH2_NUM_2; + size_per_word = bd->dram_ch2_size >> 1; + break; + default: + pr_err("error: unsupported DRAM Ch2 width\n"); + return -EINVAL; + } + + /* Set DDR size */ + switch (size_per_word) { + case SZ_64M: + tmp |= SG_MEMCONF_CH2_SZ_64M; + break; + case SZ_128M: + tmp |= SG_MEMCONF_CH2_SZ_128M; + break; + case SZ_256M: + tmp |= SG_MEMCONF_CH2_SZ_256M; + break; + case SZ_512M: + tmp |= SG_MEMCONF_CH2_SZ_512M; + break; + default: + pr_err("error: unsupported DRAM Ch2 size\n"); + return -EINVAL; + } + + writel(tmp, SG_MEMCONF); + + return 0; +} diff --git a/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c b/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c new file mode 100644 index 0000000000..d7bf0d4e5f --- /dev/null +++ b/arch/arm/mach-uniphier/memconf/memconf-proxstream2.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/sizes.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +int proxstream2_memconf_init(const struct uniphier_board_data *bd) +{ + u32 tmp; + unsigned long size_per_word; + + tmp = readl(SG_MEMCONF); + + tmp &= ~(SG_MEMCONF_CH2_SZ_MASK | SG_MEMCONF_CH2_NUM_MASK); + + switch (bd->dram_ch2_width) { + case 16: + tmp |= SG_MEMCONF_CH2_NUM_1; + size_per_word = bd->dram_ch2_size; + break; + case 32: + tmp |= SG_MEMCONF_CH2_NUM_2; + size_per_word = bd->dram_ch2_size >> 1; + break; + default: + pr_err("error: unsupported DRAM Ch2 width\n"); + return -EINVAL; + } + + /* Set DDR size */ + switch (size_per_word) { + case SZ_64M: + tmp |= SG_MEMCONF_CH2_SZ_64M; + break; + case SZ_128M: + tmp |= SG_MEMCONF_CH2_SZ_128M; + break; + case SZ_256M: + tmp |= SG_MEMCONF_CH2_SZ_256M; + break; + case SZ_512M: + tmp |= SG_MEMCONF_CH2_SZ_512M; + break; + default: + pr_err("error: unsupported DRAM Ch2 size\n"); + return -EINVAL; + } + + if (size_per_word) + tmp &= ~SG_MEMCONF_CH2_DISABLE; + else + tmp |= SG_MEMCONF_CH2_DISABLE; + + writel(tmp, SG_MEMCONF); + + return 0; +} diff --git a/arch/arm/mach-uniphier/memconf/memconf.c b/arch/arm/mach-uniphier/memconf/memconf.c new file mode 100644 index 0000000000..d490736fa4 --- /dev/null +++ b/arch/arm/mach-uniphier/memconf/memconf.c @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/sizes.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +int memconf_init(const struct uniphier_board_data *bd) +{ + u32 tmp = 0; + unsigned long size_per_word; + + tmp = readl(SG_MEMCONF); + + tmp &= ~(SG_MEMCONF_CH0_SZ_MASK | SG_MEMCONF_CH0_NUM_MASK); + + switch (bd->dram_ch0_width) { + case 16: + tmp |= SG_MEMCONF_CH0_NUM_1; + size_per_word = bd->dram_ch0_size; + break; + case 32: + tmp |= SG_MEMCONF_CH0_NUM_2; + size_per_word = bd->dram_ch0_size >> 1; + break; + default: + pr_err("error: unsupported DRAM Ch0 width\n"); + return -EINVAL; + } + + /* Set DDR size */ + switch (size_per_word) { + case SZ_64M: + tmp |= SG_MEMCONF_CH0_SZ_64M; + break; + case SZ_128M: + tmp |= SG_MEMCONF_CH0_SZ_128M; + break; + case SZ_256M: + tmp |= SG_MEMCONF_CH0_SZ_256M; + break; + case SZ_512M: + tmp |= SG_MEMCONF_CH0_SZ_512M; + break; + case SZ_1G: + tmp |= SG_MEMCONF_CH0_SZ_1G; + break; + default: + pr_err("error: unsupported DRAM Ch0 size\n"); + return -EINVAL; + } + + tmp &= ~(SG_MEMCONF_CH1_SZ_MASK | SG_MEMCONF_CH1_NUM_MASK); + + switch (bd->dram_ch1_width) { + case 16: + tmp |= SG_MEMCONF_CH1_NUM_1; + size_per_word = bd->dram_ch1_size; + break; + case 32: + tmp |= SG_MEMCONF_CH1_NUM_2; + size_per_word = bd->dram_ch1_size >> 1; + break; + default: + pr_err("error: unsupported DRAM Ch1 width\n"); + return -EINVAL; + } + + switch (size_per_word) { + case SZ_64M: + tmp |= SG_MEMCONF_CH1_SZ_64M; + break; + case SZ_128M: + tmp |= SG_MEMCONF_CH1_SZ_128M; + break; + case SZ_256M: + tmp |= SG_MEMCONF_CH1_SZ_256M; + break; + case SZ_512M: + tmp |= SG_MEMCONF_CH1_SZ_512M; + break; + case SZ_1G: + tmp |= SG_MEMCONF_CH1_SZ_1G; + break; + default: + pr_err("error: unsupported DRAM Ch1 size\n"); + return -EINVAL; + } + + if (bd->dram_ch0_base + bd->dram_ch0_size < bd->dram_ch1_base) + tmp |= SG_MEMCONF_SPARSEMEM; + else + tmp &= ~SG_MEMCONF_SPARSEMEM; + + writel(tmp, SG_MEMCONF); + + return 0; +} diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/micro-support-card.c index ea85b20e97..4c34748c25 100644 --- a/arch/arm/mach-uniphier/support_card.c +++ b/arch/arm/mach-uniphier/micro-support-card.c @@ -5,15 +5,17 @@ */ #include <common.h> +#include <linux/ctype.h> #include <linux/io.h> -#include <mach/board.h> +#include <mach/micro-support-card.h> -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) +#define MICRO_SUPPORT_CARD_BASE 0x43f00000 +#define SMC911X_BASE ((MICRO_SUPPORT_CARD_BASE) + 0x00000) +#define LED_BASE ((MICRO_SUPPORT_CARD_BASE) + 0x90000) +#define NS16550A_BASE ((MICRO_SUPPORT_CARD_BASE) + 0xb0000) +#define MICRO_SUPPORT_CARD_RESET ((MICRO_SUPPORT_CARD_BASE) + 0xd0034) +#define MICRO_SUPPORT_CARD_REVISION ((MICRO_SUPPORT_CARD_BASE) + 0xd00E0) -#define PFC_MICRO_SUPPORT_CARD_RESET \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034) -#define PFC_MICRO_SUPPORT_CARD_REVISION \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0) /* * 0: reset deassert, 1: reset * @@ -22,65 +24,22 @@ */ void support_card_reset_deassert(void) { - writel(0, PFC_MICRO_SUPPORT_CARD_RESET); + writel(0, MICRO_SUPPORT_CARD_RESET); } void support_card_reset(void) { - writel(3, PFC_MICRO_SUPPORT_CARD_RESET); + writel(3, MICRO_SUPPORT_CARD_RESET); } static int support_card_show_revision(void) { u32 revision; - revision = readl(PFC_MICRO_SUPPORT_CARD_REVISION); - printf("(PFC CPLD version %d.%d)\n", revision >> 4, revision & 0xf); + revision = readl(MICRO_SUPPORT_CARD_REVISION); + printf("(CPLD version %d.%d)\n", revision >> 4, revision & 0xf); return 0; } -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) - -#define DCC_MICRO_SUPPORT_CARD_RESET_LAN \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401300) -#define DCC_MICRO_SUPPORT_CARD_RESET_UART \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401304) -#define DCC_MICRO_SUPPORT_CARD_RESET_I2C \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x00401308) -#define DCC_MICRO_SUPPORT_CARD_REVISION \ - ((CONFIG_SUPPORT_CARD_BASE) + 0x005000E0) - -void support_card_reset_deassert(void) -{ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ - writel(1, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ -} - -void support_card_reset(void) -{ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_LAN); /* LAN and LED */ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_UART); /* UART */ - writel(0, DCC_MICRO_SUPPORT_CARD_RESET_I2C); /* I2C */ -} - -static int support_card_show_revision(void) -{ - u32 revision; - - revision = readl(DCC_MICRO_SUPPORT_CARD_REVISION); - - if (revision >= 0x67) { - printf("(DCC CPLD version 3.%d.%d)\n", - revision >> 4, revision & 0xf); - return 0; - } else { - printf("(DCC CPLD unknown version)\n"); - return -1; - } -} -#endif int check_support_card(void) { @@ -104,7 +63,7 @@ void support_card_init(void) int board_eth_init(bd_t *bis) { - return smc911x_initialize(0, CONFIG_SMC911X_BASE); + return smc911x_initialize(0, SMC911X_BASE); } #endif @@ -146,27 +105,10 @@ static int mem_is_flash(const struct memory_bank *mem) return ret; } -#if defined(CONFIG_PFC_MICRO_SUPPORT_CARD) - /* {address, size} */ -static const struct memory_bank memory_banks_boot_swap_off[] = { - {0x02000000, 0x01f00000}, -}; - -static const struct memory_bank memory_banks_boot_swap_on[] = { - {0x00000000, 0x01f00000}, -}; -#endif - -#if defined(CONFIG_DCC_MICRO_SUPPORT_CARD) -static const struct memory_bank memory_banks_boot_swap_off[] = { - {0x04000000, 0x02000000}, -}; - -static const struct memory_bank memory_banks_boot_swap_on[] = { - {0x00000000, 0x02000000}, - {0x04000000, 0x02000000}, +/* {address, size} */ +static const struct memory_bank memory_banks[] = { + {0x42000000, 0x01f00000}, }; -#endif static const struct memory_bank *flash_banks_list[CONFIG_SYS_MAX_FLASH_BANKS_DETECT]; @@ -187,13 +129,8 @@ static void detect_num_flash_banks(void) cfi_flash_num_flash_banks = 0; - if (boot_is_swapped()) { - memory_bank = memory_banks_boot_swap_on; - end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_on); - } else { - memory_bank = memory_banks_boot_swap_off; - end = memory_bank + ARRAY_SIZE(memory_banks_boot_swap_off); - } + memory_bank = memory_banks; + end = memory_bank + ARRAY_SIZE(memory_banks); for (; memory_bank < end; memory_bank++) { if (cfi_flash_num_flash_banks >= @@ -222,3 +159,73 @@ void support_card_late_init(void) { detect_num_flash_banks(); } + +static const u8 ledval_num[] = { + 0x7e, /* 0 */ + 0x0c, /* 1 */ + 0xb6, /* 2 */ + 0x9e, /* 3 */ + 0xcc, /* 4 */ + 0xda, /* 5 */ + 0xfa, /* 6 */ + 0x4e, /* 7 */ + 0xfe, /* 8 */ + 0xde, /* 9 */ +}; + +static const u8 ledval_alpha[] = { + 0xee, /* A */ + 0xf8, /* B */ + 0x72, /* C */ + 0xbc, /* D */ + 0xf2, /* E */ + 0xe2, /* F */ + 0x7a, /* G */ + 0xe8, /* H */ + 0x08, /* I */ + 0x3c, /* J */ + 0xea, /* K */ + 0x70, /* L */ + 0x6e, /* M */ + 0xa8, /* N */ + 0xb8, /* O */ + 0xe6, /* P */ + 0xce, /* Q */ + 0xa0, /* R */ + 0xc8, /* S */ + 0x8c, /* T */ + 0x7c, /* U */ + 0x54, /* V */ + 0xfc, /* W */ + 0xec, /* X */ + 0xdc, /* Y */ + 0xa4, /* Z */ +}; + +static u8 char2ledval(char c) +{ + if (isdigit(c)) + return ledval_num[c - '0']; + else if (isalpha(c)) + return ledval_alpha[toupper(c) - 'A']; + + return 0; +} + +void led_puts(const char *s) +{ + int i; + u32 val = 0; + + if (!s) + return; + + for (i = 0; i < 4; i++) { + val <<= 8; + val |= char2ledval(*s); + if (*s != '\0') + s++; + } + + writel(~val, LED_BASE); +} diff --git a/arch/arm/mach-uniphier/ph1-ld4/Makefile b/arch/arm/mach-uniphier/ph1-ld4/Makefile deleted file mode 100644 index 1410b12cb6..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += bcu_init.o sg_init.o pll_init.o early_clkrst_init.o \ - early_pinctrl.o pll_spectrum.o umc_init.o ddrphy_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c b/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c deleted file mode 100644 index d359b56291..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/boot-mode.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/boot-mode.c" diff --git a/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c deleted file mode 100644 index d7ef16b10a..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/early_clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/early_clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c deleted file mode 100644 index e5e86bb363..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/early_pinctrl.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2011-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <mach/sg-regs.h> - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(85, 1); /* HSDOUT3 -> RXD0 */ - sg_set_pinsel(88, 1); /* HDDOUT6 -> TXD0 */ - - sg_set_pinsel(69, 23); /* PCIOWR -> TXD1 */ - sg_set_pinsel(70, 23); /* PCIORD -> RXD1 */ - - sg_set_pinsel(128, 13); /* XIRQ6 -> TXD2 */ - sg_set_pinsel(129, 13); /* XIRQ7 -> RXD2 */ - - sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ - sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S deleted file mode 100644 index 7928c5c87c..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/lowlevel_debug.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/linkage.h> -#include <mach/sg-regs.h> - -#define UART_CLK 36864000 -#include <mach/debug-uart.S> - -ENTRY(setup_lowlevel_debug) - init_debug_uart r0, r1, r2 - - /* UART Port 0 */ - set_pinsel 85, 1, r0, r1 - set_pinsel 88, 1, r0, r1 - - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c b/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c deleted file mode 100644 index 20cc7b30c4..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/pinctrl.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/io.h> -#include <mach/sg-regs.h> - -void pin_init(void) -{ - u32 tmp; - - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(158, 0); /* XNFRE -> XNFRE_GB */ - sg_set_pinsel(159, 0); /* XNFWE -> XNFWE_GB */ - sg_set_pinsel(160, 0); /* XFALE -> NFALE_GB */ - sg_set_pinsel(161, 0); /* XFCLE -> NFCLE_GB */ - sg_set_pinsel(162, 0); /* XNFWP -> XFNWP_GB */ - sg_set_pinsel(163, 0); /* XNFCE0 -> XNFCE0_GB */ - sg_set_pinsel(164, 0); /* NANDRYBY0 -> NANDRYBY0_GB */ - sg_set_pinsel(22, 0); /* MMCCLK -> XFNCE1_GB */ - sg_set_pinsel(23, 0); /* MMCCMD -> NANDRYBY1_GB */ - sg_set_pinsel(24, 0); /* MMCDAT0 -> NFD0_GB */ - sg_set_pinsel(25, 0); /* MMCDAT1 -> NFD1_GB */ - sg_set_pinsel(26, 0); /* MMCDAT2 -> NFD2_GB */ - sg_set_pinsel(27, 0); /* MMCDAT3 -> NFD3_GB */ - sg_set_pinsel(28, 0); /* MMCDAT4 -> NFD4_GB */ - sg_set_pinsel(29, 0); /* MMCDAT5 -> NFD5_GB */ - sg_set_pinsel(30, 0); /* MMCDAT6 -> NFD6_GB */ - sg_set_pinsel(31, 0); /* MMCDAT7 -> NFD7_GB */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(53, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(54, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(55, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(56, 0); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(67, 23); */ /* PCOE -> USB2VBUS */ - /* sg_set_pinsel(68, 23); */ /* PCWAIT -> USB2OD */ -#endif - - tmp = readl(SG_IECTRL); - tmp |= 0x41; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c deleted file mode 100644 index 837b2a891b..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/pll_spectrum.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/pll_spectrum.c" diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c deleted file mode 100644 index 5b5958be05..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/io.h> -#include <mach/sbc-regs.h> -#include <mach/sg-regs.h> - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); - - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); - writel(0x0400bc01, SBBASE1); - writel(0x0800bf01, SBBASE3); - - /* enable access to sub memory when boot swap is on */ - if (boot_is_swapped()) - sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */ - - sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */ -} diff --git a/arch/arm/mach-uniphier/ph1-ld4/sg_init.c b/arch/arm/mach-uniphier/ph1-ld4/sg_init.c deleted file mode 100644 index dab56e949c..0000000000 --- a/arch/arm/mach-uniphier/ph1-ld4/sg_init.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/io.h> -#include <mach/sg-regs.h> - -void sg_init(void) -{ - u32 tmp; - - /* Input ports must be enabled before deasserting reset of cores */ - tmp = readl(SG_IECTRL); - tmp |= 0x1; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/Makefile b/arch/arm/mach-uniphier/ph1-pro4/Makefile deleted file mode 100644 index 229f4432ff..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += sg_init.o pll_init.o early_clkrst_init.o \ - early_pinctrl.o pll_spectrum.o umc_init.o ddrphy_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c deleted file mode 100644 index e78d6ab501..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/early_pinctrl.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/io.h> -#include <mach/sg-regs.h> - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(127, 0); /* RXD0 -> RXD0 */ - sg_set_pinsel(128, 0); /* TXD0 -> TXD0 */ - sg_set_pinsel(129, 0); /* RXD1 -> RXD1 */ - sg_set_pinsel(130, 0); /* TXD1 -> TXD1 */ - sg_set_pinsel(131, 0); /* RXD2 -> RXD2 */ - sg_set_pinsel(132, 0); /* TXD2 -> TXD2 */ - sg_set_pinsel(88, 2); /* CH6CLK -> RXD3 */ - sg_set_pinsel(89, 2); /* CH6VAL -> TXD3 */ -#endif - - writel(1, SG_LOADPINCTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S deleted file mode 100644 index fcaf6d12d8..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/lowlevel_debug.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/linkage.h> -#include <mach/sc-regs.h> -#include <mach/sg-regs.h> - -#define UART_CLK 73728000 -#include <mach/debug-uart.S> - -ENTRY(setup_lowlevel_debug) - ldr r0, =SC_CLKCTRL - ldr r1, [r0] - orr r1, r1, #SC_CLKCTRL_CEN_PERI - str r1, [r0] - - init_debug_uart r0, r1, r2 - - /* UART Port 0 */ - set_pinsel 127, 0, r0, r1 - set_pinsel 128, 0, r0, r1 - - ldr r0, =SG_LOADPINCTRL - mov r1, #1 - str r1, [r0] - - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c b/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c deleted file mode 100644 index 2a5a296f88..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/io.h> -#include <mach/sg-regs.h> - -void pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(40, 0); /* NFD0 -> NFD0 */ - sg_set_pinsel(41, 0); /* NFD1 -> NFD1 */ - sg_set_pinsel(42, 0); /* NFD2 -> NFD2 */ - sg_set_pinsel(43, 0); /* NFD3 -> NFD3 */ - sg_set_pinsel(44, 0); /* NFD4 -> NFD4 */ - sg_set_pinsel(45, 0); /* NFD5 -> NFD5 */ - sg_set_pinsel(46, 0); /* NFD6 -> NFD6 */ - sg_set_pinsel(47, 0); /* NFD7 -> NFD7 */ - sg_set_pinsel(48, 0); /* NFALE -> NFALE */ - sg_set_pinsel(49, 0); /* NFCLE -> NFCLE */ - sg_set_pinsel(50, 0); /* XNFRE -> XNFRE */ - sg_set_pinsel(51, 0); /* XNFWE -> XNFWE */ - sg_set_pinsel(52, 0); /* XNFWP -> XNFWP */ - sg_set_pinsel(53, 0); /* XNFCE0 -> XNFCE0 */ - sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */ - /* sg_set_pinsel(131, 1); */ /* RXD2 -> NRYBY1 */ - /* sg_set_pinsel(132, 1); */ /* TXD2 -> XNFCE1 */ -#endif - -#ifdef CONFIG_USB_XHCI_UNIPHIER - sg_set_pinsel(180, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(181, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(182, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(183, 0); /* USB1OD -> USB1OD */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */ - sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */ - sg_set_pinsel(187, 0); /* USB3VBUS -> USB3VBUS */ - sg_set_pinsel(188, 0); /* USB3OD -> USB3OD */ -#endif - - writel(1, SG_LOADPINCTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c deleted file mode 100644 index 877ba79f68..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init_3cs.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/io.h> -#include <mach/sbc-regs.h> -#include <mach/sg-regs.h> - -void sbc_init(void) -{ - /* XECS0: boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04); - - /* XECS1: sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - - /* XECS3: peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34); - - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0400bc01, SBBASE1); /* sub memory */ - writel(0x0800bf01, SBBASE3); /* peripherals */ - - /* enable access to sub memory when boot swap is on */ - if (boot_is_swapped()) - sg_set_pinsel(318, 5); /* PORT22 -> XECS0 */ - - sg_set_pinsel(313, 5); /* PORT15 -> XECS3 */ - writel(0x00000001, SG_LOADPINCTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-pro4/sg_init.c b/arch/arm/mach-uniphier/ph1-pro4/sg_init.c deleted file mode 100644 index d6ccffbbc3..0000000000 --- a/arch/arm/mach-uniphier/ph1-pro4/sg_init.c +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/io.h> -#include <mach/sg-regs.h> - -void sg_init(void) -{ - u32 tmp; - - /* Input ports must be enabled before deasserting reset of cores */ - tmp = readl(SG_IECTRL); - tmp |= 1 << 6; - writel(tmp, SG_IECTRL); -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/Makefile b/arch/arm/mach-uniphier/ph1-sld3/Makefile deleted file mode 100644 index aff5d640d6..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_DEBUG_LL) += lowlevel_debug.o -obj-y += bcu_init.o memconf.o sg_init.o pll_init.o early_clkrst_init.o \ - early_pinctrl.o pll_spectrum.o umc_init.o -obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += sbc_init.o -obj-$(CONFIG_DCC_MICRO_SUPPORT_CARD) += sbc_init_3cs.o -else -obj-$(CONFIG_BOARD_EARLY_INIT_F) += pinctrl.o clkrst_init.o -endif - -obj-y += boot-mode.o diff --git a/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c deleted file mode 100644 index 3a3dab7a15..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c deleted file mode 100644 index d7ef16b10a..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/early_clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/early_clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c deleted file mode 100644 index f113e658d8..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/early_pinctrl.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <mach/sg-regs.h> - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(63, 0); /* RXD0 */ - sg_set_pinsel(64, 1); /* TXD0 */ - - sg_set_pinsel(65, 0); /* RXD1 */ - sg_set_pinsel(66, 1); /* TXD1 */ - - sg_set_pinsel(96, 2); /* RXD2 */ - sg_set_pinsel(102, 2); /* TXD2 */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S deleted file mode 100644 index 41f67b7a8f..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/lowlevel_debug.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/linkage.h> -#include <mach/bcu-regs.h> -#include <mach/sc-regs.h> -#include <mach/sg-regs.h> - -#define UART_CLK 36864000 -#include <mach/debug-uart.S> - -ENTRY(setup_lowlevel_debug) - ldr r0, =BCSCR5 - ldr r1, =0x24440000 - str r1, [r0] - - ldr r0, =SC_CLKCTRL - ldr r1, [r0] - orr r1, r1, #SC_CLKCTRL_CEN_PERI - str r1, [r0] - - init_debug_uart r0, r1, r2 - - set_pinsel 63, 0, r0, r1 - set_pinsel 64, 1, r0, r1 - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-sld3/memconf.c b/arch/arm/mach-uniphier/ph1-sld3/memconf.c deleted file mode 100644 index 553a9e3384..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/memconf.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/types.h> -#include <linux/sizes.h> -#include <mach/sg-regs.h> - -static inline u32 sg_memconf_val_ch2(unsigned long size, int num) -{ - int size_mb = size / num; - u32 ret; - - switch (size_mb) { - case SZ_64M: - ret = SG_MEMCONF_CH2_SZ_64M; - break; - case SZ_128M: - ret = SG_MEMCONF_CH2_SZ_128M; - break; - case SZ_256M: - ret = SG_MEMCONF_CH2_SZ_256M; - break; - case SZ_512M: - ret = SG_MEMCONF_CH2_SZ_512M; - break; - default: - BUG(); - break; - } - - switch (num) { - case 1: - ret |= SG_MEMCONF_CH2_NUM_1; - break; - case 2: - ret |= SG_MEMCONF_CH2_NUM_2; - break; - default: - BUG(); - break; - } - return ret; -} - -u32 memconf_additional_val(void) -{ - return sg_memconf_val_ch2(CONFIG_SDRAM2_SIZE, CONFIG_DDR_NUM_CH2); -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c deleted file mode 100644 index 5ecbe4cca3..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/pinctrl.c +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <mach/sg-regs.h> - -void pin_init(void) -{ -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(13, 0); /* USB0OC */ - sg_set_pinsel(14, 1); /* USB0VBUS */ - - sg_set_pinsel(15, 0); /* USB1OC */ - sg_set_pinsel(16, 1); /* USB1VBUS */ - - sg_set_pinsel(17, 0); /* USB2OC */ - sg_set_pinsel(18, 1); /* USB2VBUS */ - - sg_set_pinsel(19, 0); /* USB3OC */ - sg_set_pinsel(20, 1); /* USB3VBUS */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c deleted file mode 100644 index f5e24467ce..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init_3cs.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/io.h> -#include <mach/sbc-regs.h> -#include <mach/sg-regs.h> - -void sbc_init(void) -{ - /* only address/data multiplex mode is supported */ - - /* XECS0 : boot/sub memory (boot swap = off/on) */ - writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL00); - writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL01); - writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL02); - - /* XECS1 : sub/boot memory (boot swap = off/on) */ - writel(SBCTRL0_ADMULTIPLX_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_ADMULTIPLX_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_ADMULTIPLX_MEM_VALUE, SBCTRL12); - - /* XECS2 : peripherals */ - writel(SBCTRL0_ADMULTIPLX_PERI_VALUE, SBCTRL20); - writel(SBCTRL1_ADMULTIPLX_PERI_VALUE, SBCTRL21); - writel(SBCTRL2_ADMULTIPLX_PERI_VALUE, SBCTRL22); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); - writel(0x0400bc01, SBBASE1); - writel(0x0800bf01, SBBASE2); - - sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */ -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/sg_init.c b/arch/arm/mach-uniphier/ph1-sld3/sg_init.c deleted file mode 100644 index ca3cb9c6b8..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/sg_init.c +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -void sg_init(void) -{ -} diff --git a/arch/arm/mach-uniphier/ph1-sld3/umc_init.c b/arch/arm/mach-uniphier/ph1-sld3/umc_init.c deleted file mode 100644 index 91ee3de282..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld3/umc_init.c +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> - -int umc_init(void) -{ - /* add UMC init code here */ - printf("Implement memory init code\n"); - - return 0; -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/Makefile b/arch/arm/mach-uniphier/ph1-sld8/Makefile deleted file mode 100644 index 8eb575e1d3..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/Makefile +++ /dev/null @@ -1 +0,0 @@ -include $(src)/../ph1-ld4/Makefile diff --git a/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c b/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c deleted file mode 100644 index 69b172e4e7..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/bcu_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/bcu_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c b/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c deleted file mode 100644 index d359b56291..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/boot-mode.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-pro4/boot-mode.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c deleted file mode 100644 index 8d3435d632..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c b/arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c deleted file mode 100644 index dd236b7e50..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/early_clkrst_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/early_clkrst_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c b/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c deleted file mode 100644 index 28cc4296fc..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/early_pinctrl.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2011-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <mach/sg-regs.h> - -void early_pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_UNIPHIER_SERIAL - sg_set_pinsel(70, 3); /* HDDOUT0 -> TXD0 */ - sg_set_pinsel(71, 3); /* HSDOUT1 -> RXD0 */ - - sg_set_pinsel(114, 0); /* TXD1 -> TXD1 */ - sg_set_pinsel(115, 0); /* RXD1 -> RXD1 */ - - sg_set_pinsel(112, 1); /* SBO1 -> TXD2 */ - sg_set_pinsel(113, 1); /* SBI1 -> RXD2 */ - - sg_set_pinsel(110, 1); /* SBO0 -> TXD3 */ - sg_set_pinsel(111, 1); /* SBI0 -> RXD3 */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S b/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S deleted file mode 100644 index 73f0f63eba..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/lowlevel_debug.S +++ /dev/null @@ -1,29 +0,0 @@ -/* - * On-chip UART initializaion for low-level debugging - * - * Copyright (C) 2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/linkage.h> -#include <mach/sg-regs.h> - -#define UART_CLK 80000000 -#include <mach/debug-uart.S> - -ENTRY(setup_lowlevel_debug) - init_debug_uart r0, r1, r2 - - /* UART Port 0 */ - set_pinsel 70, 3, r0, r1 - set_pinsel 71, 3, r0, r1 - - ldr r0, =SG_IECTRL - ldr r1, [r0] - orr r1, r1, #1 - str r1, [r0] - - mov pc, lr -ENDPROC(setup_lowlevel_debug) diff --git a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c b/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c deleted file mode 100644 index 130c831736..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/pinctrl.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <linux/io.h> -#include <mach/sg-regs.h> - -void pin_init(void) -{ - /* Comment format: PAD Name -> Function Name */ - -#ifdef CONFIG_SYS_I2C_UNIPHIER - { - u32 tmp; - tmp = readl(SG_IECTRL); - tmp |= 0xc00; /* enable SCL0, SDA0, SCL1, SDA1 */ - writel(tmp, SG_IECTRL); - } -#endif - -#ifdef CONFIG_NAND_DENALI - sg_set_pinsel(15, 0); /* XNFRE_GB -> XNFRE_GB */ - sg_set_pinsel(16, 0); /* XNFWE_GB -> XNFWE_GB */ - sg_set_pinsel(17, 0); /* XFALE_GB -> NFALE_GB */ - sg_set_pinsel(18, 0); /* XFCLE_GB -> NFCLE_GB */ - sg_set_pinsel(19, 0); /* XNFWP_GB -> XFNWP_GB */ - sg_set_pinsel(20, 0); /* XNFCE0_GB -> XNFCE0_GB */ - sg_set_pinsel(21, 0); /* NANDRYBY0_GB -> NANDRYBY0_GB */ - sg_set_pinsel(22, 0); /* XFNCE1_GB -> XFNCE1_GB */ - sg_set_pinsel(23, 0); /* NANDRYBY1_GB -> NANDRYBY1_GB */ - sg_set_pinsel(24, 0); /* NFD0_GB -> NFD0_GB */ - sg_set_pinsel(25, 0); /* NFD1_GB -> NFD1_GB */ - sg_set_pinsel(26, 0); /* NFD2_GB -> NFD2_GB */ - sg_set_pinsel(27, 0); /* NFD3_GB -> NFD3_GB */ - sg_set_pinsel(28, 0); /* NFD4_GB -> NFD4_GB */ - sg_set_pinsel(29, 0); /* NFD5_GB -> NFD5_GB */ - sg_set_pinsel(30, 0); /* NFD6_GB -> NFD6_GB */ - sg_set_pinsel(31, 0); /* NFD7_GB -> NFD7_GB */ -#endif - -#ifdef CONFIG_USB_EHCI_UNIPHIER - sg_set_pinsel(41, 0); /* USB0VBUS -> USB0VBUS */ - sg_set_pinsel(42, 0); /* USB0OD -> USB0OD */ - sg_set_pinsel(43, 0); /* USB1VBUS -> USB1VBUS */ - sg_set_pinsel(44, 0); /* USB1OD -> USB1OD */ - /* sg_set_pinsel(114, 1); */ /* TXD1 -> USB2VBUS (shared with UART) */ - /* sg_set_pinsel(115, 1); */ /* RXD1 -> USB2OD */ -#endif -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c b/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c deleted file mode 100644 index 9b8c4855e5..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/pll_spectrum.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/pll_spectrum.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c b/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c deleted file mode 100644 index 225c0d24de..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/sbc_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/sbc_init.c" diff --git a/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c b/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c deleted file mode 100644 index c2267c73ee..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/sbc_init_3cs.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/io.h> -#include <mach/sbc-regs.h> -#include <mach/sg-regs.h> - -void sbc_init(void) -{ - u32 tmp; - - /* system bus output enable */ - tmp = readl(PC0CTRL); - tmp &= 0xfffffcff; - writel(tmp, PC0CTRL); - - /* - * SBCTRL0* does not need settings because PH1-sLD8 has no support for - * XECS0. The boot swap must be enabled to boot from the support card. - */ - - if (boot_is_swapped()) { - /* XECS1 : boot memory if boot swap is on */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14); - } - - /* XECS4 : sub memory */ - writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL40); - writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL41); - writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL42); - writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL44); - - /* XECS5 : peripherals */ - writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL50); - writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL51); - writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL52); - writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL54); - - /* base address regsiters */ - writel(0x0000bc01, SBBASE0); /* boot memory */ - writel(0x0900bfff, SBBASE1); /* dummy */ - writel(0x0400bc01, SBBASE4); /* sub memory */ - writel(0x0800bf01, SBBASE5); /* peripherals */ - - sg_set_pinsel(134, 16); /* XIRQ6 -> XECS4 */ - sg_set_pinsel(135, 16); /* XIRQ7 -> XECS5 */ - - /* dummy read to assure write process */ - readl(SG_PINCTRL(0)); -} diff --git a/arch/arm/mach-uniphier/ph1-sld8/sg_init.c b/arch/arm/mach-uniphier/ph1-sld8/sg_init.c deleted file mode 100644 index a808289a56..0000000000 --- a/arch/arm/mach-uniphier/ph1-sld8/sg_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/sg_init.c" diff --git a/arch/arm/mach-uniphier/pinctrl/Makefile b/arch/arm/mach-uniphier/pinctrl/Makefile new file mode 100644 index 0000000000..85175955d3 --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += pinctrl-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += pinctrl-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += pinctrl-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += pinctrl-ph1-sld8.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += pinctrl-ph1-pro5.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += pinctrl-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += pinctrl-ph1-ld6b.o diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c new file mode 100644 index 0000000000..160d3ef299 --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld4.c @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +void ph1_ld4_pin_init(void) +{ + u32 tmp; + + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(158, 0, 8, 4); /* XNFRE -> XNFRE_GB */ + sg_set_pinsel(159, 0, 8, 4); /* XNFWE -> XNFWE_GB */ + sg_set_pinsel(160, 0, 8, 4); /* XFALE -> NFALE_GB */ + sg_set_pinsel(161, 0, 8, 4); /* XFCLE -> NFCLE_GB */ + sg_set_pinsel(162, 0, 8, 4); /* XNFWP -> XFNWP_GB */ + sg_set_pinsel(163, 0, 8, 4); /* XNFCE0 -> XNFCE0_GB */ + sg_set_pinsel(164, 0, 8, 4); /* NANDRYBY0 -> NANDRYBY0_GB */ + sg_set_pinsel(22, 0, 8, 4); /* MMCCLK -> XFNCE1_GB */ + sg_set_pinsel(23, 0, 8, 4); /* MMCCMD -> NANDRYBY1_GB */ + sg_set_pinsel(24, 0, 8, 4); /* MMCDAT0 -> NFD0_GB */ + sg_set_pinsel(25, 0, 8, 4); /* MMCDAT1 -> NFD1_GB */ + sg_set_pinsel(26, 0, 8, 4); /* MMCDAT2 -> NFD2_GB */ + sg_set_pinsel(27, 0, 8, 4); /* MMCDAT3 -> NFD3_GB */ + sg_set_pinsel(28, 0, 8, 4); /* MMCDAT4 -> NFD4_GB */ + sg_set_pinsel(29, 0, 8, 4); /* MMCDAT5 -> NFD5_GB */ + sg_set_pinsel(30, 0, 8, 4); /* MMCDAT6 -> NFD6_GB */ + sg_set_pinsel(31, 0, 8, 4); /* MMCDAT7 -> NFD7_GB */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(53, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(54, 0, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(55, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(56, 0, 8, 4); /* USB1OD -> USB1OD */ + /* sg_set_pinsel(67, 23, 8, 4); */ /* PCOE -> USB2VBUS */ + /* sg_set_pinsel(68, 23, 8, 4); */ /* PCWAIT -> USB2OD */ +#endif + + tmp = readl(SG_IECTRL); + tmp |= 0x41; + writel(tmp, SG_IECTRL); +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c new file mode 100644 index 0000000000..4f950d3fc6 --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +void ph1_ld6b_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(30, 0, 8, 4); /* XNFRE -> XNFRE */ + sg_set_pinsel(31, 0, 8, 4); /* XNFWE -> XNFWE */ + sg_set_pinsel(32, 0, 8, 4); /* NFALE -> NFALE */ + sg_set_pinsel(33, 0, 8, 4); /* NFCLE -> NFCLE */ + sg_set_pinsel(34, 0, 8, 4); /* XNFWP -> XNFWP */ + sg_set_pinsel(35, 0, 8, 4); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(36, 0, 8, 4); /* NRYBY0 -> NRYBY0 */ + sg_set_pinsel(37, 0, 8, 4); /* XNFCE1 -> NRYBY1 */ + sg_set_pinsel(38, 0, 8, 4); /* NRYBY1 -> XNFCE1 */ + sg_set_pinsel(39, 0, 8, 4); /* NFD0 -> NFD0 */ + sg_set_pinsel(40, 0, 8, 4); /* NFD1 -> NFD1 */ + sg_set_pinsel(41, 0, 8, 4); /* NFD2 -> NFD2 */ + sg_set_pinsel(42, 0, 8, 4); /* NFD3 -> NFD3 */ + sg_set_pinsel(43, 0, 8, 4); /* NFD4 -> NFD4 */ + sg_set_pinsel(44, 0, 8, 4); /* NFD5 -> NFD5 */ + sg_set_pinsel(45, 0, 8, 4); /* NFD6 -> NFD6 */ + sg_set_pinsel(46, 0, 8, 4); /* NFD7 -> NFD7 */ +#endif + +#ifdef CONFIG_USB_XHCI_UNIPHIER + sg_set_pinsel(56, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(57, 0, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(58, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(59, 0, 8, 4); /* USB1OD -> USB1OD */ + sg_set_pinsel(60, 0, 8, 4); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(61, 0, 8, 4); /* USB2OD -> USB2OD */ + sg_set_pinsel(62, 0, 8, 4); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(63, 0, 8, 4); /* USB3OD -> USB3OD */ +#endif +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c new file mode 100644 index 0000000000..f50644c52b --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro4.c @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +void ph1_pro4_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(40, 0, 4, 8); /* NFD0 -> NFD0 */ + sg_set_pinsel(41, 0, 4, 8); /* NFD1 -> NFD1 */ + sg_set_pinsel(42, 0, 4, 8); /* NFD2 -> NFD2 */ + sg_set_pinsel(43, 0, 4, 8); /* NFD3 -> NFD3 */ + sg_set_pinsel(44, 0, 4, 8); /* NFD4 -> NFD4 */ + sg_set_pinsel(45, 0, 4, 8); /* NFD5 -> NFD5 */ + sg_set_pinsel(46, 0, 4, 8); /* NFD6 -> NFD6 */ + sg_set_pinsel(47, 0, 4, 8); /* NFD7 -> NFD7 */ + sg_set_pinsel(48, 0, 4, 8); /* NFALE -> NFALE */ + sg_set_pinsel(49, 0, 4, 8); /* NFCLE -> NFCLE */ + sg_set_pinsel(50, 0, 4, 8); /* XNFRE -> XNFRE */ + sg_set_pinsel(51, 0, 4, 8); /* XNFWE -> XNFWE */ + sg_set_pinsel(52, 0, 4, 8); /* XNFWP -> XNFWP */ + sg_set_pinsel(53, 0, 4, 8); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(54, 0, 4, 8); /* NRYBY0 -> NRYBY0 */ + /* sg_set_pinsel(131, 1, 4, 8); */ /* RXD2 -> NRYBY1 */ + /* sg_set_pinsel(132, 1, 4, 8); */ /* TXD2 -> XNFCE1 */ +#endif + +#ifdef CONFIG_USB_XHCI_UNIPHIER + sg_set_pinsel(180, 0, 4, 8); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(181, 0, 4, 8); /* USB0OD -> USB0OD */ + sg_set_pinsel(182, 0, 4, 8); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(183, 0, 4, 8); /* USB1OD -> USB1OD */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(184, 0, 4, 8); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(185, 0, 4, 8); /* USB2OD -> USB2OD */ + sg_set_pinsel(187, 0, 4, 8); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(188, 0, 4, 8); /* USB3OD -> USB3OD */ +#endif + + writel(1, SG_LOADPINCTRL); +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c new file mode 100644 index 0000000000..a6cc0824e2 --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-pro5.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +void ph1_pro5_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(19, 0, 4, 8); /* XNFRE -> XNFRE */ + sg_set_pinsel(20, 0, 4, 8); /* XNFWE -> XNFWE */ + sg_set_pinsel(21, 0, 4, 8); /* NFALE -> NFALE */ + sg_set_pinsel(22, 0, 4, 8); /* NFCLE -> NFCLE */ + sg_set_pinsel(23, 0, 4, 8); /* XNFWP -> XNFWP */ + sg_set_pinsel(24, 0, 4, 8); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(25, 0, 4, 8); /* NRYBY0 -> NRYBY0 */ + sg_set_pinsel(26, 0, 4, 8); /* XNFCE1 -> XNFCE1 */ + sg_set_pinsel(27, 0, 4, 8); /* NRYBY1 -> NRYBY1 */ + sg_set_pinsel(28, 0, 4, 8); /* NFD0 -> NFD0 */ + sg_set_pinsel(29, 0, 4, 8); /* NFD1 -> NFD1 */ + sg_set_pinsel(30, 0, 4, 8); /* NFD2 -> NFD2 */ + sg_set_pinsel(31, 0, 4, 8); /* NFD3 -> NFD3 */ + sg_set_pinsel(32, 0, 4, 8); /* NFD4 -> NFD4 */ + sg_set_pinsel(33, 0, 4, 8); /* NFD5 -> NFD5 */ + sg_set_pinsel(34, 0, 4, 8); /* NFD6 -> NFD6 */ + sg_set_pinsel(35, 0, 4, 8); /* NFD7 -> NFD7 */ +#endif + +#ifdef CONFIG_USB_XHCI_UNIPHIER + sg_set_pinsel(124, 0, 4, 8); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(125, 0, 4, 8); /* USB0OD -> USB0OD */ + sg_set_pinsel(126, 0, 4, 8); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(127, 0, 4, 8); /* USB1OD -> USB1OD */ +#endif + + writel(1, SG_LOADPINCTRL); +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c new file mode 100644 index 0000000000..f1b2bbbb4a --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld3.c @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <mach/init.h> +#include <mach/sg-regs.h> + +void ph1_sld3_pin_init(void) +{ +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(13, 0, 4, 4); /* USB0OC */ + sg_set_pinsel(14, 1, 4, 4); /* USB0VBUS */ + + sg_set_pinsel(15, 0, 4, 4); /* USB1OC */ + sg_set_pinsel(16, 1, 4, 4); /* USB1VBUS */ + + sg_set_pinsel(17, 0, 4, 4); /* USB2OC */ + sg_set_pinsel(18, 1, 4, 4); /* USB2VBUS */ + + sg_set_pinsel(19, 0, 4, 4); /* USB3OC */ + sg_set_pinsel(20, 1, 4, 4); /* USB3VBUS */ +#endif +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c new file mode 100644 index 0000000000..f936a53d1f --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-sld8.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +void ph1_sld8_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(15, 0, 8, 4); /* XNFRE_GB -> XNFRE_GB */ + sg_set_pinsel(16, 0, 8, 4); /* XNFWE_GB -> XNFWE_GB */ + sg_set_pinsel(17, 0, 8, 4); /* XFALE_GB -> NFALE_GB */ + sg_set_pinsel(18, 0, 8, 4); /* XFCLE_GB -> NFCLE_GB */ + sg_set_pinsel(19, 0, 8, 4); /* XNFWP_GB -> XFNWP_GB */ + sg_set_pinsel(20, 0, 8, 4); /* XNFCE0_GB -> XNFCE0_GB */ + sg_set_pinsel(21, 0, 8, 4); /* NANDRYBY0_GB -> NANDRYBY0_GB */ + sg_set_pinsel(22, 0, 8, 4); /* XFNCE1_GB -> XFNCE1_GB */ + sg_set_pinsel(23, 0, 8, 4); /* NANDRYBY1_GB -> NANDRYBY1_GB */ + sg_set_pinsel(24, 0, 8, 4); /* NFD0_GB -> NFD0_GB */ + sg_set_pinsel(25, 0, 8, 4); /* NFD1_GB -> NFD1_GB */ + sg_set_pinsel(26, 0, 8, 4); /* NFD2_GB -> NFD2_GB */ + sg_set_pinsel(27, 0, 8, 4); /* NFD3_GB -> NFD3_GB */ + sg_set_pinsel(28, 0, 8, 4); /* NFD4_GB -> NFD4_GB */ + sg_set_pinsel(29, 0, 8, 4); /* NFD5_GB -> NFD5_GB */ + sg_set_pinsel(30, 0, 8, 4); /* NFD6_GB -> NFD6_GB */ + sg_set_pinsel(31, 0, 8, 4); /* NFD7_GB -> NFD7_GB */ +#endif + +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(41, 0, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(42, 0, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(43, 0, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(44, 0, 8, 4); /* USB1OD -> USB1OD */ + /* sg_set_pinsel(114, 1, 8, 4); */ /* TXD1 -> USB2VBUS (shared with UART) */ + /* sg_set_pinsel(115, 1, 8, 4); */ /* RXD1 -> USB2OD */ +#endif +} diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c new file mode 100644 index 0000000000..96abd0235c --- /dev/null +++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-proxstream2.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sg-regs.h> + +void proxstream2_pin_init(void) +{ + /* Comment format: PAD Name -> Function Name */ + +#ifdef CONFIG_NAND_DENALI + sg_set_pinsel(30, 8, 8, 4); /* XNFRE -> XNFRE */ + sg_set_pinsel(31, 8, 8, 4); /* XNFWE -> XNFWE */ + sg_set_pinsel(32, 8, 8, 4); /* NFALE -> NFALE */ + sg_set_pinsel(33, 8, 8, 4); /* NFCLE -> NFCLE */ + sg_set_pinsel(34, 8, 8, 4); /* XNFWP -> XNFWP */ + sg_set_pinsel(35, 8, 8, 4); /* XNFCE0 -> XNFCE0 */ + sg_set_pinsel(36, 8, 8, 4); /* NRYBY0 -> NRYBY0 */ + sg_set_pinsel(37, 8, 8, 4); /* XNFCE1 -> NRYBY1 */ + sg_set_pinsel(38, 8, 8, 4); /* NRYBY1 -> XNFCE1 */ + sg_set_pinsel(39, 8, 8, 4); /* NFD0 -> NFD0 */ + sg_set_pinsel(40, 8, 8, 4); /* NFD1 -> NFD1 */ + sg_set_pinsel(41, 8, 8, 4); /* NFD2 -> NFD2 */ + sg_set_pinsel(42, 8, 8, 4); /* NFD3 -> NFD3 */ + sg_set_pinsel(43, 8, 8, 4); /* NFD4 -> NFD4 */ + sg_set_pinsel(44, 8, 8, 4); /* NFD5 -> NFD5 */ + sg_set_pinsel(45, 8, 8, 4); /* NFD6 -> NFD6 */ + sg_set_pinsel(46, 8, 8, 4); /* NFD7 -> NFD7 */ +#endif + +#ifdef CONFIG_USB_XHCI_UNIPHIER + sg_set_pinsel(56, 8, 8, 4); /* USB0VBUS -> USB0VBUS */ + sg_set_pinsel(57, 8, 8, 4); /* USB0OD -> USB0OD */ + sg_set_pinsel(58, 8, 8, 4); /* USB1VBUS -> USB1VBUS */ + sg_set_pinsel(59, 8, 8, 4); /* USB1OD -> USB1OD */ + sg_set_pinsel(60, 8, 8, 4); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(61, 8, 8, 4); /* USB2OD -> USB2OD */ + sg_set_pinsel(62, 8, 8, 4); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(63, 8, 8, 4); /* USB3OD -> USB3OD */ +#endif +} diff --git a/arch/arm/mach-uniphier/pll/Makefile b/arch/arm/mach-uniphier/pll/Makefile new file mode 100644 index 0000000000..d33f99e446 --- /dev/null +++ b/arch/arm/mach-uniphier/pll/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += pll-init-ph1-sld3.o \ + pll-spectrum-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += pll-init-ph1-ld4.o \ + pll-spectrum-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += pll-init-ph1-pro4.o \ + pll-spectrum-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += pll-init-ph1-sld8.o \ + pll-spectrum-ph1-ld4.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/pll_init.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c index f8ec2b61fb..a272a900e1 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/pll_init.c +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-ld4.c @@ -5,13 +5,15 @@ */ #include <common.h> +#include <linux/err.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> #include <mach/sg-regs.h> #undef DPLL_SSC_RATE_1PER -static void dpll_init(void) +static int dpll_init(unsigned int dram_freq) { u32 tmp; @@ -22,13 +24,17 @@ static void dpll_init(void) */ tmp = readl(SC_DPLLCTRL); tmp &= ~0x000f0000; -#if CONFIG_DDR_FREQ == 1600 - tmp |= 0x000c0000; -#elif CONFIG_DDR_FREQ == 1333 - tmp |= 0x000d0000; -#else -# error "Unknown frequency" -#endif + switch (dram_freq) { + case 1333: + tmp |= 0x000d0000; + break; + case 1600: + tmp |= 0x000c0000; + break; + default: + pr_err("Unsupported frequency"); + return -EINVAL; + } #if defined(DPLL_SSC_RATE_1PER) tmp &= ~SC_DPLLCTRL_SSC_RATE; @@ -40,6 +46,8 @@ static void dpll_init(void) tmp = readl(SC_DPLLCTRL2); tmp |= SC_DPLLCTRL2_NRSTDS; writel(tmp, SC_DPLLCTRL2); + + return 0; } static void upll_init(void) @@ -174,9 +182,13 @@ static void vpll_init(void) writel(tmp, SC_VPLL27BCTRL); } -void pll_init(void) +int ph1_ld4_pll_init(const struct uniphier_board_data *bd) { - dpll_init(); + int ret; + + ret = dpll_init(bd->dram_freq); + if (ret) + return ret; upll_init(); vpll_init(); @@ -186,4 +198,6 @@ void pll_init(void) * so 20 usec can be saved here. */ udelay(480); + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c index d693368816..906c22f6c5 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/pll_init.c +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-pro4.c @@ -5,13 +5,15 @@ */ #include <common.h> +#include <linux/err.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> #include <mach/sg-regs.h> #undef DPLL_SSC_RATE_1PER -static void dpll_init(void) +static int dpll_init(unsigned int dram_freq) { u32 tmp; @@ -22,13 +24,17 @@ static void dpll_init(void) */ tmp = readl(SC_DPLLCTRL); tmp &= ~(0x000f0000); -#if CONFIG_DDR_FREQ == 1600 - tmp |= 0x000c0000; -#elif CONFIG_DDR_FREQ == 1333 - tmp |= 0x000d0000; -#else -# error "Unsupported frequency" -#endif + switch (dram_freq) { + case 1333: + tmp |= 0x000d0000; + break; + case 1600: + tmp |= 0x000c0000; + break; + default: + pr_err("Unsupported frequency"); + return -EINVAL; + } /* * Set Moduration rate @@ -44,6 +50,8 @@ static void dpll_init(void) tmp = readl(SC_DPLLCTRL2); tmp |= SC_DPLLCTRL2_NRSTDS; writel(tmp, SC_DPLLCTRL2); + + return 0; } static void vpll_init(void) @@ -54,12 +62,10 @@ static void vpll_init(void) tmp = readl(SG_PINMON0); clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK; -#if defined(CONFIG_MACH_PH1_PRO4) /* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */ if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ || clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) return; -#endif /* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */ tmp = readl(SC_VPLL27ACTRL); @@ -138,9 +144,13 @@ static void vpll_init(void) writel(tmp, SC_VPLL27BCTRL); } -void pll_init(void) +int ph1_pro4_pll_init(const struct uniphier_board_data *bd) { - dpll_init(); + int ret; + + ret = dpll_init(bd->dram_freq); + if (ret) + return ret; vpll_init(); /* @@ -148,4 +158,6 @@ void pll_init(void) * We wait 1 usec in vpll_init() so 1 usec can be saved here. */ udelay(499); + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-sld3/pll_init.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c index ebd1c310b7..6294a452c2 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/pll_init.c +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld3.c @@ -4,7 +4,10 @@ * SPDX-License-Identifier: GPL-2.0+ */ -void pll_init(void) +#include <mach/init.h> + +int ph1_sld3_pll_init(const struct uniphier_board_data *bd) { /* add pll init code here */ + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-sld8/pll_init.c b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c index 109cb5fee0..f249abeeda 100644 --- a/arch/arm/mach-uniphier/ph1-sld8/pll_init.c +++ b/arch/arm/mach-uniphier/pll/pll-init-ph1-sld8.c @@ -6,6 +6,7 @@ #include <common.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> #include <mach/sg-regs.h> @@ -186,7 +187,7 @@ static void vpll_init(void) writel(tmp, SC_VPLL27BCTRL); } -void pll_init(void) +int ph1_sld8_pll_init(const struct uniphier_board_data *bd) { dpll_init(); upll_init(); @@ -198,4 +199,6 @@ void pll_init(void) * so 20 usec can be saved here. */ udelay(480); + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c index fcf2ad282a..cad0ed8cdd 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/pll_spectrum.c +++ b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-ld4.c @@ -4,15 +4,17 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <common.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> -void enable_dpll_ssc(void) +int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd) { u32 tmp; tmp = readl(SC_DPLLCTRL); tmp |= SC_DPLLCTRL_SSC_EN; writel(tmp, SC_DPLLCTRL); + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c index fcf2ad282a..43dc973654 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/pll_spectrum.c +++ b/arch/arm/mach-uniphier/pll/pll-spectrum-ph1-sld3.c @@ -6,13 +6,16 @@ #include <common.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sc-regs.h> -void enable_dpll_ssc(void) +int ph1_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd) { u32 tmp; tmp = readl(SC_DPLLCTRL); tmp |= SC_DPLLCTRL_SSC_EN; writel(tmp, SC_DPLLCTRL); + + return 0; } diff --git a/arch/arm/mach-uniphier/print_misc_info.c b/arch/arm/mach-uniphier/print_misc_info.c index 22ea512285..5140b0c438 100644 --- a/arch/arm/mach-uniphier/print_misc_info.c +++ b/arch/arm/mach-uniphier/print_misc_info.c @@ -5,7 +5,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <mach/board.h> +#include <mach/micro-support-card.h> int misc_init_f(void) { diff --git a/arch/arm/mach-uniphier/sbc/Makefile b/arch/arm/mach-uniphier/sbc/Makefile new file mode 100644 index 0000000000..db622d2034 --- /dev/null +++ b/arch/arm/mach-uniphier/sbc/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD3) += sbc-ph1-sld3.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += sbc-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += sbc-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += sbc-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO5) += sbc-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PROXSTREAM2) += sbc-proxstream2.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD6B) += sbc-proxstream2.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c index 8e25792b50..929f50a883 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/sbc_init.c +++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-ld4.c @@ -6,10 +6,11 @@ #include <common.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sbc-regs.h> #include <mach/sg-regs.h> -void sbc_init(void) +int ph1_ld4_sbc_init(const struct uniphier_board_data *bd) { u32 tmp; @@ -30,20 +31,22 @@ void sbc_init(void) if (boot_is_swapped()) { /* * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals */ writel(0x0000bc01, SBBASE0); } else { /* * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x03efffff: memory bank (31MB) - * 0x03f00000-0x03ffffff: peripherals (1MB) + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) */ writel(0x0000be01, SBBASE0); /* dummy */ writel(0x0200be01, SBBASE1); } + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c index 533739c364..1032c54e64 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/sbc_init.c +++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-pro4.c @@ -6,10 +6,11 @@ #include <common.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sbc-regs.h> #include <mach/sg-regs.h> -void sbc_init(void) +int ph1_pro4_sbc_init(const struct uniphier_board_data *bd) { /* * Only CS1 is connected to support card. @@ -23,20 +24,22 @@ void sbc_init(void) if (boot_is_swapped()) { /* * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals */ writel(0x0000bc01, SBBASE0); } else { /* * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x03efffff: memory bank (31MB) - * 0x03f00000-0x03ffffff: peripherals (1MB) + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) */ writel(0x0000be01, SBBASE0); /* dummy */ writel(0x0200be01, SBBASE1); } + + return 0; } diff --git a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c b/arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c index d66f89ea51..fb707be83a 100644 --- a/arch/arm/mach-uniphier/ph1-sld3/sbc_init.c +++ b/arch/arm/mach-uniphier/sbc/sbc-ph1-sld3.c @@ -6,10 +6,11 @@ #include <common.h> #include <linux/io.h> +#include <mach/init.h> #include <mach/sbc-regs.h> #include <mach/sg-regs.h> -void sbc_init(void) +int ph1_sld3_sbc_init(const struct uniphier_board_data *bd) { /* only address/data multiplex mode is supported */ @@ -24,22 +25,24 @@ void sbc_init(void) if (boot_is_swapped()) { /* * Boot Swap On: boot from external NOR/SRAM - * 0x02000000-0x03ffffff is a mirror of 0x00000000-0x01ffffff. + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. * - * 0x00000000-0x01efffff, 0x02000000-0x03efffff: memory bank - * 0x01f00000-0x01ffffff, 0x03f00000-0x03ffffff: peripherals + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals */ writel(0x0000bc01, SBBASE0); } else { /* * Boot Swap Off: boot from mask ROM - * 0x00000000-0x01ffffff: mask ROM - * 0x02000000-0x03efffff: memory bank (31MB) - * 0x03f00000-0x03ffffff: peripherals (1MB) + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) */ writel(0x0000be01, SBBASE0); /* dummy */ writel(0x0200be01, SBBASE1); } - sg_set_pinsel(99, 1); /* GPIO26 -> EA24 */ + sg_set_pinsel(99, 1, 4, 4); /* GPIO26 -> EA24 */ + + return 0; } diff --git a/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c b/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c new file mode 100644 index 0000000000..9c3aeb7cd0 --- /dev/null +++ b/arch/arm/mach-uniphier/sbc/sbc-proxstream2.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <mach/init.h> +#include <mach/sbc-regs.h> +#include <mach/sg-regs.h> + +int proxstream2_sbc_init(const struct uniphier_board_data *bd) +{ + /* necessary for ROM boot ?? */ + /* system bus output enable */ + writel(0x17, PC0CTRL); + + /* + * Only CS1 is connected to support card. + * BKSZ[1:0] should be set to "01". + */ + writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL10); + writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL11); + writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL12); + writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL14); + + if (boot_is_swapped()) { + /* + * Boot Swap On: boot from external NOR/SRAM + * 0x42000000-0x43ffffff is a mirror of 0x40000000-0x41ffffff. + * + * 0x40000000-0x41efffff, 0x42000000-0x43efffff: memory bank + * 0x41f00000-0x41ffffff, 0x43f00000-0x43ffffff: peripherals + */ + writel(0x0000bc01, SBBASE0); + } else { + /* + * Boot Swap Off: boot from mask ROM + * 0x40000000-0x41ffffff: mask ROM + * 0x42000000-0x43efffff: memory bank (31MB) + * 0x43f00000-0x43ffffff: peripherals (1MB) + */ + writel(0x0000be01, SBBASE0); /* dummy */ + writel(0x0200be01, SBBASE1); + } + + return 0; +} diff --git a/arch/arm/mach-uniphier/soc_info.c b/arch/arm/mach-uniphier/soc_info.c new file mode 100644 index 0000000000..3e8e7f4ef3 --- /dev/null +++ b/arch/arm/mach-uniphier/soc_info.c @@ -0,0 +1,61 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/io.h> +#include <linux/types.h> +#include <mach/sg-regs.h> +#include <mach/soc_info.h> + +#if UNIPHIER_MULTI_SOC +enum uniphier_soc_id uniphier_get_soc_type(void) +{ + u32 revision = readl(SG_REVISION); + enum uniphier_soc_id ret; + + switch ((revision & SG_REVISION_TYPE_MASK) >> SG_REVISION_TYPE_SHIFT) { +#ifdef CONFIG_ARCH_UNIPHIER_PH1_SLD3 + case 0x25: + ret = SOC_UNIPHIER_PH1_SLD3; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_LD4 + case 0x26: + ret = SOC_UNIPHIER_PH1_LD4; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_PRO4 + case 0x28: + ret = SOC_UNIPHIER_PH1_PRO4; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_SLD8 + case 0x29: + ret = SOC_UNIPHIER_PH1_SLD8; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_PRO5 + case 0x2A: + ret = SOC_UNIPHIER_PH1_PRO5; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PROXSTREAM2 + case 0x2E: + ret = SOC_UNIPHIER_PROXSTREAM2; + break; +#endif +#ifdef CONFIG_ARCH_UNIPHIER_PH1_LD6B + case 0x2F: + ret = SOC_UNIPHIER_PH1_LD6B; + break; +#endif + default: + ret = SOC_UNIPHIER_UNKNOWN; + break; + } + + return ret; +} +#endif diff --git a/arch/arm/mach-uniphier/spl.c b/arch/arm/mach-uniphier/spl.c deleted file mode 100644 index a34d3a167c..0000000000 --- a/arch/arm/mach-uniphier/spl.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * Copyright (C) 2013-2015 Panasonic Corporation - * Copyright (C) 2015 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <spl.h> -#include <linux/compiler.h> -#include <mach/led.h> -#include <mach/board.h> - -void __weak bcu_init(void) -{ -}; -void sbc_init(void); -void sg_init(void); -void pll_init(void); -void pin_init(void); -void memconf_init(void); -void early_clkrst_init(void); -void early_pin_init(void); -int umc_init(void); -void enable_dpll_ssc(void); - -void spl_board_init(void) -{ - bcu_init(); - - sbc_init(); - - sg_init(); - - uniphier_board_reset(); - - pll_init(); - - uniphier_board_init(); - - led_write(L, 0, , ); - - memconf_init(); - - led_write(L, 1, , ); - - early_clkrst_init(); - - led_write(L, 2, , ); - - early_pin_init(); - - led_write(L, 3, , ); - -#ifdef CONFIG_SPL_SERIAL_SUPPORT - preloader_console_init(); -#endif - - led_write(L, 4, , ); - - { - int res; - - res = umc_init(); - if (res < 0) { - while (1) - ; - } - } - led_write(L, 5, , ); - - enable_dpll_ssc(); - - led_write(L, 6, , ); -} diff --git a/arch/arm/mach-uniphier/umc/Makefile b/arch/arm/mach-uniphier/umc/Makefile new file mode 100644 index 0000000000..dd35e77dab --- /dev/null +++ b/arch/arm/mach-uniphier/umc/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_ARCH_UNIPHIER_PH1_LD4) += umc-ph1-ld4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_PRO4) += umc-ph1-pro4.o +obj-$(CONFIG_ARCH_UNIPHIER_PH1_SLD8) += umc-ph1-sld8.o diff --git a/arch/arm/mach-uniphier/ph1-ld4/umc_init.c b/arch/arm/mach-uniphier/umc/umc-ph1-ld4.c index a7a4157e79..81246850b3 100644 --- a/arch/arm/mach-uniphier/ph1-ld4/umc_init.c +++ b/arch/arm/mach-uniphier/umc/umc-ph1-ld4.c @@ -5,7 +5,10 @@ */ #include <common.h> +#include <linux/err.h> #include <linux/io.h> +#include <linux/sizes.h> +#include <mach/init.h> #include <mach/umc-regs.h> #include <mach/ddrphy-regs.h> @@ -136,14 +139,14 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1) writel(0x00000101, dramcont0 + UMC_DIOCTLA); - ddrphy_init(phy0_0, freq, size_ch0); + ph1_ld4_ddrphy_init(phy0_0, freq, size_ch0); ddrphy_prepare_training(phy0_0, 0); ddrphy_training(phy0_0); writel(0x00000101, dramcont1 + UMC_DIOCTLA); - ddrphy_init(phy1_0, freq, size_ch1); + ph1_ld4_ddrphy_init(phy1_0, freq, size_ch1); ddrphy_prepare_training(phy1_0, 1); ddrphy_training(phy1_0); @@ -156,16 +159,17 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1) return 0; } -int umc_init(void) +int ph1_ld4_umc_init(const struct uniphier_board_data *bd) { - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); + if ((bd->dram_ch0_size == SZ_128M || bd->dram_ch0_size == SZ_256M) && + (bd->dram_ch1_size == SZ_128M || bd->dram_ch1_size == SZ_256M) && + (bd->dram_freq == 1333 || bd->dram_freq == 1600) && + bd->dram_ch0_width == 16 && bd->dram_ch1_width == 16) { + return umc_init_sub(bd->dram_freq, + bd->dram_ch0_size / SZ_128M, + bd->dram_ch1_size / SZ_128M); + } else { + pr_err("Unsupported DDR configuration\n"); + return -EINVAL; + } } - -#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ - (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ - CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 -/* OK */ -#else -#error Unsupported DDR configuration. -#endif diff --git a/arch/arm/mach-uniphier/ph1-pro4/umc_init.c b/arch/arm/mach-uniphier/umc/umc-ph1-pro4.c index bd8b9d83b2..8c9f0579fc 100644 --- a/arch/arm/mach-uniphier/ph1-pro4/umc_init.c +++ b/arch/arm/mach-uniphier/umc/umc-ph1-pro4.c @@ -5,7 +5,10 @@ */ #include <common.h> +#include <linux/err.h> #include <linux/io.h> +#include <linux/sizes.h> +#include <mach/init.h> #include <mach/umc-regs.h> #include <mach/ddrphy-regs.h> @@ -107,28 +110,28 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1) writel(0x00000101, dramcont0 + UMC_DIOCTLA); - ddrphy_init(phy0_0, freq, size_ch0); + ph1_pro4_ddrphy_init(phy0_0, freq, size_ch0); ddrphy_prepare_training(phy0_0, 0); ddrphy_training(phy0_0); writel(0x00000103, dramcont0 + UMC_DIOCTLA); - ddrphy_init(phy0_1, freq, size_ch0); + ph1_pro4_ddrphy_init(phy0_1, freq, size_ch0); ddrphy_prepare_training(phy0_1, 1); ddrphy_training(phy0_1); writel(0x00000101, dramcont1 + UMC_DIOCTLA); - ddrphy_init(phy1_0, freq, size_ch1); + ph1_pro4_ddrphy_init(phy1_0, freq, size_ch1); ddrphy_prepare_training(phy1_0, 0); ddrphy_training(phy1_0); writel(0x00000103, dramcont1 + UMC_DIOCTLA); - ddrphy_init(phy1_1, freq, size_ch1); + ph1_pro4_ddrphy_init(phy1_1, freq, size_ch1); ddrphy_prepare_training(phy1_1, 1); ddrphy_training(phy1_1); @@ -141,17 +144,18 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1) return 0; } -int umc_init(void) +int ph1_pro4_umc_init(const struct uniphier_board_data *bd) { - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); + if (((bd->dram_ch0_size == SZ_512M && bd->dram_ch0_width == 32) || + (bd->dram_ch0_size == SZ_256M && bd->dram_ch0_width == 16)) && + ((bd->dram_ch1_size == SZ_512M && bd->dram_ch1_width == 32) || + (bd->dram_ch1_size == SZ_256M && bd->dram_ch1_width == 16)) && + bd->dram_freq == 1600) { + return umc_init_sub(bd->dram_freq, + bd->dram_ch0_size / SZ_128M, + bd->dram_ch1_size / SZ_128M); + } else { + pr_err("Unsupported DDR configuration\n"); + return -EINVAL; + } } - -#if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \ - (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \ - ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \ - (CONFIG_SDRAM1_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH1 == 1)) -/* OK */ -#else - #error Unsupported DDR configuration. -#endif diff --git a/arch/arm/mach-uniphier/ph1-sld8/umc_init.c b/arch/arm/mach-uniphier/umc/umc-ph1-sld8.c index 7baea7e852..bc60a3472e 100644 --- a/arch/arm/mach-uniphier/ph1-sld8/umc_init.c +++ b/arch/arm/mach-uniphier/umc/umc-ph1-sld8.c @@ -5,7 +5,10 @@ */ #include <common.h> +#include <linux/err.h> #include <linux/io.h> +#include <linux/sizes.h> +#include <mach/init.h> #include <mach/umc-regs.h> #include <mach/ddrphy-regs.h> @@ -116,14 +119,14 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1) writel(0x00000101, dramcont0 + UMC_DIOCTLA); - ddrphy_init(phy0_0, freq, size_ch0); + ph1_sld8_ddrphy_init(phy0_0, freq, size_ch0); ddrphy_prepare_training(phy0_0, 0); ddrphy_training(phy0_0); writel(0x00000101, dramcont1 + UMC_DIOCTLA); - ddrphy_init(phy1_0, freq, size_ch1); + ph1_sld8_ddrphy_init(phy1_0, freq, size_ch1); ddrphy_prepare_training(phy1_0, 1); ddrphy_training(phy1_0); @@ -136,16 +139,17 @@ static int umc_init_sub(int freq, int size_ch0, int size_ch1) return 0; } -int umc_init(void) +int ph1_sld8_umc_init(const struct uniphier_board_data *bd) { - return umc_init_sub(CONFIG_DDR_FREQ, CONFIG_SDRAM0_SIZE / 0x08000000, - CONFIG_SDRAM1_SIZE / 0x08000000); + if ((bd->dram_ch0_size == SZ_128M || bd->dram_ch0_size == SZ_256M) && + (bd->dram_ch1_size == SZ_128M || bd->dram_ch1_size == SZ_256M) && + bd->dram_freq == 1333 && + bd->dram_ch0_width == 16 && bd->dram_ch1_width == 16) { + return umc_init_sub(bd->dram_freq, + bd->dram_ch0_size / SZ_128M, + bd->dram_ch1_size / SZ_128M); + } else { + pr_err("Unsupported DDR configuration\n"); + return -EINVAL; + } } - -#if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ - (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ - CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 -/* OK */ -#else -#error Unsupported DDR configuration. -#endif |
