diff options
Diffstat (limited to 'arch')
28 files changed, 1151 insertions, 22 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3992f69b12..0d756cbc55 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -543,13 +543,20 @@ config ARCH_ZYNQ select CPU_V7 select SUPPORT_SPL select OF_CONTROL + select SPL_OF_CONTROL select DM + select SPL_DM select DM_SPI + select DM_SERIAL select DM_SPI_FLASH + select SPL_SEPARATE_BSS config ARCH_ZYNQMP bool "Support Xilinx ZynqMP Platform" select ARM64 + select DM + select OF_CONTROL + select DM_SERIAL config TEGRA bool "NVIDIA Tegra" diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ddc6a057d5..910648ca2d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -65,6 +65,8 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \ zynq-zc770-xm011.dtb \ zynq-zc770-xm012.dtb \ zynq-zc770-xm013.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += \ + zynqmp-ep108.dtb dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-evm.dtb dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi index 84c15b5c79..83be51ae9d 100644 --- a/arch/arm/dts/zynq-7000.dtsi +++ b/arch/arm/dts/zynq-7000.dtsi @@ -54,6 +54,7 @@ }; amba: amba { + u-boot,dm-pre-reloc; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/dts/zynq-microzed.dts b/arch/arm/dts/zynq-microzed.dts index d5e0050893..e841a1d616 100644 --- a/arch/arm/dts/zynq-microzed.dts +++ b/arch/arm/dts/zynq-microzed.dts @@ -26,3 +26,8 @@ &qspi { status = "okay"; }; + +&uart1 { + u-boot,dm-pre-reloc; + status = "okay"; +}; diff --git a/arch/arm/dts/zynq-picozed.dts b/arch/arm/dts/zynq-picozed.dts index 686b98fe7e..3408df8b8b 100644 --- a/arch/arm/dts/zynq-picozed.dts +++ b/arch/arm/dts/zynq-picozed.dts @@ -21,3 +21,8 @@ reg = <0 0x40000000>; }; }; + +&uart1 { + u-boot,dm-pre-reloc; + status = "okay"; +}; diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts index 4d8696021b..c41723641e 100644 --- a/arch/arm/dts/zynq-zc702.dts +++ b/arch/arm/dts/zynq-zc702.dts @@ -376,6 +376,7 @@ }; &uart1 { + u-boot,dm-pre-reloc; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_default>; diff --git a/arch/arm/dts/zynq-zc706.dts b/arch/arm/dts/zynq-zc706.dts index fc336ea5c9..5088cfee3e 100644 --- a/arch/arm/dts/zynq-zc706.dts +++ b/arch/arm/dts/zynq-zc706.dts @@ -297,6 +297,7 @@ }; &uart1 { + u-boot,dm-pre-reloc; status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_default>; diff --git a/arch/arm/dts/zynq-zc770-xm010.dts b/arch/arm/dts/zynq-zc770-xm010.dts index cf56ac8d82..07e2b7a738 100644 --- a/arch/arm/dts/zynq-zc770-xm010.dts +++ b/arch/arm/dts/zynq-zc770-xm010.dts @@ -88,6 +88,7 @@ }; &uart1 { + u-boot,dm-pre-reloc; status = "okay"; }; diff --git a/arch/arm/dts/zynq-zc770-xm011.dts b/arch/arm/dts/zynq-zc770-xm011.dts index f73c0ddcb8..77e3bb0e63 100644 --- a/arch/arm/dts/zynq-zc770-xm011.dts +++ b/arch/arm/dts/zynq-zc770-xm011.dts @@ -55,6 +55,7 @@ }; &uart1 { + u-boot,dm-pre-reloc; status = "okay"; }; diff --git a/arch/arm/dts/zynq-zc770-xm012.dts b/arch/arm/dts/zynq-zc770-xm012.dts index 4289e31f46..3e1769acb5 100644 --- a/arch/arm/dts/zynq-zc770-xm012.dts +++ b/arch/arm/dts/zynq-zc770-xm012.dts @@ -62,5 +62,6 @@ }; &uart1 { + u-boot,dm-pre-reloc; status = "okay"; }; diff --git a/arch/arm/dts/zynq-zc770-xm013.dts b/arch/arm/dts/zynq-zc770-xm013.dts index 5124cdc5cd..288e248374 100644 --- a/arch/arm/dts/zynq-zc770-xm013.dts +++ b/arch/arm/dts/zynq-zc770-xm013.dts @@ -75,5 +75,6 @@ }; &uart0 { + u-boot,dm-pre-reloc; status = "okay"; }; diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts index 363049085f..51d67d93f2 100644 --- a/arch/arm/dts/zynq-zed.dts +++ b/arch/arm/dts/zynq-zed.dts @@ -54,6 +54,7 @@ }; &uart1 { + u-boot,dm-pre-reloc; status = "okay"; }; diff --git a/arch/arm/dts/zynq-zybo.dts b/arch/arm/dts/zynq-zybo.dts index 10f7815524..dcfc00e096 100644 --- a/arch/arm/dts/zynq-zybo.dts +++ b/arch/arm/dts/zynq-zybo.dts @@ -49,5 +49,6 @@ }; &uart1 { + u-boot,dm-pre-reloc; status = "okay"; }; diff --git a/arch/arm/dts/zynqmp-ep108-clk.dtsi b/arch/arm/dts/zynqmp-ep108-clk.dtsi new file mode 100644 index 0000000000..f864526553 --- /dev/null +++ b/arch/arm/dts/zynqmp-ep108-clk.dtsi @@ -0,0 +1,119 @@ +/* + * clock specification for Xilinx ZynqMP ep108 development board + * + * (C) Copyright 2015, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +&amba { + misc_clk: misc_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + i2c_clk: i2c_clk { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <111111111>; + }; + + sata_clk: sata_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <75000000>; + }; + + dp_aclk: clock0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-accuracy = <100>; + }; + + dp_aud_clk: clock1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <22579200>; + clock-accuracy = <100>; + }; +}; + +&can0 { + clocks = <&misc_clk &misc_clk>; +}; + +&gem0 { + clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; +}; + +&gpio { + clocks = <&misc_clk>; +}; + +&i2c0 { + clocks = <&i2c_clk>; +}; + +&i2c1 { + clocks = <&i2c_clk>; +}; + +&qspi { + clocks = <&misc_clk &misc_clk>; +}; + +&sata { + clocks = <&sata_clk>; +}; + +&sdhci0 { + clocks = <&misc_clk>, <&misc_clk>; +}; + +&sdhci1 { + clocks = <&misc_clk>, <&misc_clk>; +}; + +&spi0 { + clocks = <&misc_clk &misc_clk>; +}; + +&spi1 { + clocks = <&misc_clk &misc_clk>; +}; + +&uart0 { + clocks = <&misc_clk &misc_clk>; +}; + +&usb0 { + clocks = <&misc_clk>, <&misc_clk>; +}; + +&usb1 { + clocks = <&misc_clk>, <&misc_clk>; +}; + +&watchdog0 { + clocks= <&misc_clk>; +}; + +&xilinx_drm { + clocks = <&misc_clk>; +}; + +&xlnx_dp { + clocks = <&dp_aclk>, <&dp_aud_clk>; +}; + +&xlnx_dp_snd_codec0 { + clocks = <&dp_aud_clk>; +}; + +&xlnx_dpdma { + clocks = <&misc_clk>; +}; diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts new file mode 100644 index 0000000000..4481bd07c9 --- /dev/null +++ b/arch/arm/dts/zynqmp-ep108.dts @@ -0,0 +1,174 @@ +/* + * dts file for Xilinx ZynqMP ep108 development board + * + * (C) Copyright 2014 - 2015, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; + +/include/ "zynqmp.dtsi" +/include/ "zynqmp-ep108-clk.dtsi" + +/ { + model = "ZynqMP EP108"; + + aliases { + serial0 = &uart0; + spi0 = &qspi; + spi1 = &spi0; + spi2 = &spi1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x40000000>; + }; +}; + +&can0 { + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0{ + reg = <0>; + max-speed = <100>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + eeprom@54 { + compatible = "at,24c64"; + reg = <0x54>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + eeprom@55 { + compatible = "at,24c64"; + reg = <0x55>; + }; +}; + +&qspi { + status = "okay"; + flash@0 { + compatible = "n25q512a11"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <10000000>; + partition@qspi-fsbl-uboot { /* for testing purpose */ + label = "qspi-fsbl-uboot"; + reg = <0x0 0x100000>; + }; + partition@qspi-linux { /* for testing purpose */ + label = "qspi-linux"; + reg = <0x100000 0x500000>; + }; + partition@qspi-device-tree { /* for testing purpose */ + label = "qspi-device-tree"; + reg = <0x600000 0x20000>; + }; + partition@qspi-rootfs { /* for testing purpose */ + label = "qspi-rootfs"; + reg = <0x620000 0x5E0000>; + }; + }; +}; + +&sata { + status = "okay"; + ceva,broken-gen2; +}; + +&sdhci0 { + status = "okay"; +}; + +&sdhci1 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + num-cs = <1>; + spi0_flash0: spi0_flash0@0 { + compatible = "m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + spi0_flash0@00000000 { + label = "spi0_flash0"; + reg = <0x0 0x100000>; + }; + }; +}; + +&spi1 { + status = "okay"; + num-cs = <1>; + spi1_flash0: spi1_flash0@0 { + compatible = "m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + spi1_flash0@00000000 { + label = "spi1_flash0"; + reg = <0x0 0x100000>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; + maximum-speed = "high-speed"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; + maximum-speed = "high-speed"; +}; + +&watchdog0 { + status = "okay"; +}; + +&xlnx_dp { + xlnx,max-pclock-frequency = <200000>; +}; + +&xlnx_dpdma { + xlnx,axi-clock-freq = <200000000>; +}; diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi new file mode 100644 index 0000000000..24a34e6d85 --- /dev/null +++ b/arch/arm/dts/zynqmp.dtsi @@ -0,0 +1,668 @@ +/* + * dts file for Xilinx ZynqMP + * + * (C) Copyright 2014 - 2015, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +/ { + compatible = "xlnx,zynqmp"; + #address-cells = <2>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x0>; + }; + + cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x1>; + }; + + cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x2>; + }; + + cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x3>; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 143 4>, + <0 144 4>, + <0 145 4>, + <0 146 4>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + firmware { + compatible = "xlnx,zynqmp-pm"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <1 13 0xf01>, + <1 14 0xf01>, + <1 11 0xf01>, + <1 10 0xf01>; + }; + + amba_apu: amba_apu { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + + gic: interrupt-controller@f9010000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + reg = <0x0 0xf9010000 0x10000>, + <0x0 0xf902f000 0x2000>, + <0x0 0xf9040000 0x20000>, + <0x0 0xf906f000 0x2000>; + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <1 9 0xf04>; + }; + }; + + amba: amba { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + + can0: can@ff060000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clock-names = "can_clk", "pclk"; + reg = <0x0 0xff060000 0x1000>; + interrupts = <0 23 4>; + interrupt-parent = <&gic>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + can1: can@ff070000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clock-names = "can_clk", "pclk"; + reg = <0x0 0xff070000 0x1000>; + interrupts = <0 24 4>; + interrupt-parent = <&gic>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + /* GDMA */ + fpd_dma_chan1: dma@fd500000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd500000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 124 4>; + xlnx,id = <0>; + xlnx,bus-width = <128>; + }; + + fpd_dma_chan2: dma@fd510000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd510000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 125 4>; + xlnx,id = <1>; + xlnx,bus-width = <128>; + }; + + fpd_dma_chan3: dma@fd520000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd520000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 126 4>; + xlnx,id = <2>; + xlnx,bus-width = <128>; + }; + + fpd_dma_chan4: dma@fd530000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd530000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 127 4>; + xlnx,id = <3>; + xlnx,bus-width = <128>; + }; + + fpd_dma_chan5: dma@fd540000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd540000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 128 4>; + xlnx,id = <4>; + xlnx,bus-width = <128>; + }; + + fpd_dma_chan6: dma@fd550000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd550000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 129 4>; + xlnx,id = <5>; + xlnx,bus-width = <128>; + }; + + fpd_dma_chan7: dma@fd560000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd560000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 130 4>; + xlnx,id = <6>; + xlnx,bus-width = <128>; + }; + + fpd_dma_chan8: dma@fd570000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xfd570000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 131 4>; + xlnx,id = <7>; + xlnx,bus-width = <128>; + }; + + gpu: gpu@fd4b0000 { + status = "disabled"; + compatible = "arm,mali-400", "arm,mali-utgard"; + reg = <0x0 0xfd4b0000 0x30000>; + interrupt-parent = <&gic>; + interrupts = <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>, <0 132 4>; + interrupt-names = "IRQGP", "IRQGPMMU", "IRQPP0", "IRQPPMMU0", "IRQPP1", "IRQPPMMU1"; + }; + + /* ADMA */ + lpd_dma_chan1: dma@ffa80000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffa80000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 77 4>; + xlnx,id = <0>; + xlnx,bus-width = <64>; + }; + + lpd_dma_chan2: dma@ffa90000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffa90000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 78 4>; + xlnx,id = <1>; + xlnx,bus-width = <64>; + }; + + lpd_dma_chan3: dma@ffaa0000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffaa0000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 79 4>; + xlnx,id = <2>; + xlnx,bus-width = <64>; + }; + + lpd_dma_chan4: dma@ffab0000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffab0000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 80 4>; + xlnx,id = <3>; + xlnx,bus-width = <64>; + }; + + lpd_dma_chan5: dma@ffac0000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffac0000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 81 4>; + xlnx,id = <4>; + xlnx,bus-width = <64>; + }; + + lpd_dma_chan6: dma@ffad0000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffad0000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 82 4>; + xlnx,id = <5>; + xlnx,bus-width = <64>; + }; + + lpd_dma_chan7: dma@ffae0000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffae0000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 83 4>; + xlnx,id = <6>; + xlnx,bus-width = <64>; + }; + + lpd_dma_chan8: dma@ffaf0000 { + status = "disabled"; + compatible = "xlnx,zynqmp-dma-1.0"; + reg = <0x0 0xffaf0000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 84 4>; + xlnx,id = <7>; + xlnx,bus-width = <64>; + }; + + nand0: nand@ff100000 { + compatible = "arasan,nfc-v3p10"; + status = "disabled"; + reg = <0x0 0xff100000 0x1000>; + clock-names = "clk_sys", "clk_flash"; + interrupt-parent = <&gic>; + interrupts = <0 14 4>; + #address-cells = <2>; + #size-cells = <1>; + }; + + gem0: ethernet@ff0b0000 { + compatible = "cdns,gem"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 57 4>, <0 57 4>; + reg = <0x0 0xff0b0000 0x1000>; + clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; + jumbo-max-len = <10240>; + jumbo-supported; + }; + + gem1: ethernet@ff0c0000 { + compatible = "cdns,gem"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 59 4>, <0 59 4>; + reg = <0x0 0xff0c0000 0x1000>; + clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; + jumbo-max-len = <10240>; + jumbo-supported; + }; + + gem2: ethernet@ff0d0000 { + compatible = "cdns,gem"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 61 4>, <0 61 4>; + reg = <0x0 0xff0d0000 0x1000>; + clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; + jumbo-max-len = <10240>; + jumbo-supported; + }; + + gem3: ethernet@ff0e0000 { + compatible = "cdns,gem"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 63 4>, <0 63 4>; + reg = <0x0 0xff0e0000 0x1000>; + clock-names = "pclk", "hclk", "tx_clk"; + #address-cells = <1>; + #size-cells = <0>; + jumbo-max-len = <10240>; + jumbo-supported; + }; + + gpio: gpio@ff0a0000 { + compatible = "xlnx,zynqmp-gpio-1.0"; + status = "disabled"; + #gpio-cells = <0x2>; + interrupt-parent = <&gic>; + interrupts = <0 16 4>; + reg = <0x0 0xff0a0000 0x1000>; + }; + + i2c0: i2c@ff020000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 17 4>; + reg = <0x0 0xff020000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@ff030000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 18 4>; + reg = <0x0 0xff030000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pcie: pcie@fd0e0000 { + compatible = "xlnx,nwl-pcie-2.11"; + status = "disabled"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + interrupt-parent = <&gic>; + interrupts = < 0 118 4>, + < 0 116 4>, + < 0 115 4>, /* MSI_1 [63...32] */ + < 0 114 4 >; /* MSI_0 [31...0] */ + interrupt-names = "misc", "intx", "msi_1", "msi_0"; + reg = <0x0 0xfd0e0000 0x1000>, + <0x0 0xfd480000 0x1000>, + <0x0 0xe0000000 0x1000000>; + reg-names = "breg", "pcireg", "cfg"; + ranges = <0x02000000 0x00000000 0xe1000000 0x00000000 0xe1000000 0 0x0f000000>; + }; + + qspi: spi@ff0f0000 { + compatible = "xlnx,zynqmp-qspi-1.0"; + status = "disabled"; + clock-names = "ref_clk", "pclk"; + interrupts = <0 15 4>; + interrupt-parent = <&gic>; + num-cs = <1>; + reg = <0x0 0xff0f0000 0x1000 0x0 0xc0000000 0x8000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + rtc: rtc@ffa60000 { + compatible = "xlnx,zynqmp-rtc"; + status = "disabled"; + reg = <0x0 0xffa60000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 26 4>, <0 27 4>; + interrupt-names = "alarm", "sec"; + }; + + sata: ahci@fd0c0000 { + compatible = "ceva,ahci-1v84"; + status = "disabled"; + reg = <0x0 0xfd0c0000 0x2000>; + interrupt-parent = <&gic>; + interrupts = <0 133 4>; + }; + + sdhci0: sdhci@ff160000 { + compatible = "arasan,sdhci-8.9a"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 48 4>; + reg = <0x0 0xff160000 0x1000>; + clock-names = "clk_xin", "clk_ahb"; + }; + + sdhci1: sdhci@ff170000 { + compatible = "arasan,sdhci-8.9a"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 49 4>; + reg = <0x0 0xff170000 0x1000>; + clock-names = "clk_xin", "clk_ahb"; + }; + + smmu: smmu@fd800000 { + compatible = "arm,mmu-500"; + reg = <0x0 0xfd800000 0x20000>; + #global-interrupts = <1>; + interrupt-parent = <&gic>; + interrupts = <0 157 4>, + <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, + <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, + <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>, + <0 157 4>, <0 157 4>, <0 157 4>, <0 157 4>; + }; + + spi0: spi@ff040000 { + compatible = "cdns,spi-r1p6"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 19 4>; + reg = <0x0 0xff040000 0x1000>; + clock-names = "ref_clk", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@ff050000 { + compatible = "cdns,spi-r1p6"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 20 4>; + reg = <0x0 0xff050000 0x1000>; + clock-names = "ref_clk", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + }; + + ttc0: timer@ff110000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 36 4>, <0 37 4>, <0 38 4>; + reg = <0x0 0xff110000 0x1000>; + timer-width = <32>; + }; + + ttc1: timer@ff120000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 39 4>, <0 40 4>, <0 41 4>; + reg = <0x0 0xff120000 0x1000>; + timer-width = <32>; + }; + + ttc2: timer@ff130000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 42 4>, <0 43 4>, <0 44 4>; + reg = <0x0 0xff130000 0x1000>; + timer-width = <32>; + }; + + ttc3: timer@ff140000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 45 4>, <0 46 4>, <0 47 4>; + reg = <0x0 0xff140000 0x1000>; + timer-width = <32>; + }; + + uart0: serial@ff000000 { + compatible = "cdns,uart-r1p8"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 21 4>; + reg = <0x0 0xff000000 0x1000>; + clock-names = "uart_clk", "pclk"; + }; + + uart1: serial@ff010000 { + compatible = "cdns,uart-r1p8"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 22 4>; + reg = <0x0 0xff010000 0x1000>; + clock-names = "uart_clk", "pclk"; + }; + + usb0: usb@fe200000 { + compatible = "snps,dwc3"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 65 4>; + reg = <0x0 0xfe200000 0x40000>; + clock-names = "clk_xin", "clk_ahb"; + }; + + usb1: usb@fe300000 { + compatible = "snps,dwc3"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 70 4>; + reg = <0x0 0xfe300000 0x40000>; + clock-names = "clk_xin", "clk_ahb"; + }; + + watchdog0: watchdog@fd4d0000 { + compatible = "cdns,wdt-r1p2"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 52 1>; + reg = <0x0 0xfd4d0000 0x1000>; + timeout-sec = <10>; + }; + + xilinx_drm: xilinx_drm { + compatible = "xlnx,drm"; + status = "disabled"; + xlnx,encoder-slave = <&xlnx_dp>; + xlnx,connector-type = "DisplayPort"; + xlnx,dp-sub = <&xlnx_dp_sub>; + planes { + xlnx,pixel-format = "rgb565"; + plane0 { + dmas = <&xlnx_dpdma 3>; + dma-names = "dma"; + }; + plane1 { + dmas = <&xlnx_dpdma 0>; + dma-names = "dma"; + }; + }; + }; + + xlnx_dp: dp@43c00000 { + compatible = "xlnx,v-dp"; + status = "disabled"; + reg = <0x0 0xfd4a0000 0x1000>; + interrupts = <0 119 4>; + interrupt-parent = <&gic>; + clock-names = "aclk", "aud_clk"; + xlnx,dp-version = "v1.2"; + xlnx,max-lanes = <2>; + xlnx,max-link-rate = <540000>; + xlnx,max-bpc = <16>; + xlnx,enable-ycrcb; + xlnx,colormetry = "rgb"; + xlnx,bpc = <8>; + xlnx,audio-chan = <2>; + xlnx,dp-sub = <&xlnx_dp_sub>; + }; + + xlnx_dp_snd_card: dp_snd_card { + compatible = "xlnx,dp-snd-card"; + status = "disabled"; + xlnx,dp-snd-pcm = <&xlnx_dp_snd_pcm0>, <&xlnx_dp_snd_pcm1>; + xlnx,dp-snd-codec = <&xlnx_dp_snd_codec0>; + }; + + xlnx_dp_snd_codec0: dp_snd_codec0 { + compatible = "xlnx,dp-snd-codec"; + status = "disabled"; + clock-names = "aud_clk"; + }; + + xlnx_dp_snd_pcm0: dp_snd_pcm0 { + compatible = "xlnx,dp-snd-pcm"; + status = "disabled"; + dmas = <&xlnx_dpdma 4>; + dma-names = "tx"; + }; + + xlnx_dp_snd_pcm1: dp_snd_pcm1 { + compatible = "xlnx,dp-snd-pcm"; + status = "disabled"; + dmas = <&xlnx_dpdma 5>; + dma-names = "tx"; + }; + + xlnx_dp_sub: dp_sub@43c0a000 { + compatible = "xlnx,dp-sub"; + status = "disabled"; + reg = <0x0 0xfd4aa000 0x1000>, <0x0 0xfd4ab000 0x1000>, <0x0 0xfd4ac000 0x1000>; + reg-names = "blend", "av_buf", "aud"; + xlnx,output-fmt = "rgb"; + }; + + xlnx_dpdma: dma@fd4c0000 { + compatible = "xlnx,dpdma"; + status = "disabled"; + reg = <0x0 0xfd4c0000 0x1000>; + interrupts = <0 122 4>; + interrupt-parent = <&gic>; + clock-names = "axi_clk"; + dma-channels = <6>; + #dma-cells = <1>; + dma-video0channel@43c10000 { + compatible = "xlnx,video0"; + }; + dma-video1channel@43c10000 { + compatible = "xlnx,video1"; + }; + dma-video2channel@43c10000 { + compatible = "xlnx,video2"; + }; + dma-graphicschannel@43c10000 { + compatible = "xlnx,graphics"; + }; + dma-audio0channel@43c10000 { + compatible = "xlnx,audio0"; + }; + dma-audio1channel@43c10000 { + compatible = "xlnx,audio1"; + }; + }; + }; +}; diff --git a/arch/arm/mach-at91/armv7/clock.c b/arch/arm/mach-at91/armv7/clock.c index 0bf453eff5..41dbf16afd 100644 --- a/arch/arm/mach-at91/armv7/clock.c +++ b/arch/arm/mach-at91/armv7/clock.c @@ -5,11 +5,13 @@ * Copyright (C) 2005 Ivan Kokshaysky * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com> + * Copyright (C) 2015 Wenyou Yang <wenyou.yang@atmel.com> * * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <asm/errno.h> #include <asm/io.h> #include <asm/arch/hardware.h> #include <asm/arch/at91_pmc.h> @@ -173,3 +175,96 @@ void at91_periph_clk_disable(int id) writel(regval, &pmc->pcr); } + +int at91_enable_periph_generated_clk(u32 id, u32 clk_source, u32 div) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 regval, status; + u32 timeout = 1000; + + if (id > AT91_PMC_PCR_PID_MASK) + return -EINVAL; + + if (div > 0xff) + return -EINVAL; + + writel(id, &pmc->pcr); + regval = readl(&pmc->pcr); + regval &= ~AT91_PMC_PCR_GCKCSS; + regval &= ~AT91_PMC_PCR_GCKDIV; + + switch (clk_source) { + case GCK_CSS_SLOW_CLK: + regval |= AT91_PMC_PCR_GCKCSS_SLOW_CLK; + break; + case GCK_CSS_MAIN_CLK: + regval |= AT91_PMC_PCR_GCKCSS_MAIN_CLK; + break; + case GCK_CSS_PLLA_CLK: + regval |= AT91_PMC_PCR_GCKCSS_PLLA_CLK; + break; + case GCK_CSS_UPLL_CLK: + regval |= AT91_PMC_PCR_GCKCSS_UPLL_CLK; + break; + case GCK_CSS_MCK_CLK: + regval |= AT91_PMC_PCR_GCKCSS_MCK_CLK; + break; + case GCK_CSS_AUDIO_CLK: + regval |= AT91_PMC_PCR_GCKCSS_AUDIO_CLK; + break; + default: + printf("Error GCK clock source selection!\n"); + return -EINVAL; + } + + regval |= AT91_PMC_PCR_CMD_WRITE | + AT91_PMC_PCR_GCKDIV_(div) | + AT91_PMC_PCR_GCKEN; + + writel(regval, &pmc->pcr); + + do { + udelay(1); + status = readl(&pmc->sr); + } while ((!!(--timeout)) && (!(status & AT91_PMC_GCKRDY))); + + if (!timeout) + printf("Timeout waiting for GCK ready!\n"); + + return 0; +} + +u32 at91_get_periph_generated_clk(u32 id) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + u32 regval, clk_source, div; + u32 freq; + + if (id > AT91_PMC_PCR_PID_MASK) + return 0; + + writel(id, &pmc->pcr); + regval = readl(&pmc->pcr); + + clk_source = regval & AT91_PMC_PCR_GCKCSS; + switch (clk_source) { + case AT91_PMC_PCR_GCKCSS_SLOW_CLK: + freq = CONFIG_SYS_AT91_SLOW_CLOCK; + break; + case AT91_PMC_PCR_GCKCSS_MAIN_CLK: + freq = gd->arch.main_clk_rate_hz; + break; + case AT91_PMC_PCR_GCKCSS_PLLA_CLK: + freq = gd->arch.plla_rate_hz; + break; + default: + printf("Improper GCK clock source selection!\n"); + freq = 0; + break; + } + + div = ((regval & AT91_PMC_PCR_GCKDIV) >> AT91_PMC_PCR_GCKDIV_OFFSET); + div += 1; + + return freq / div; +} diff --git a/arch/arm/mach-at91/armv7/cpu.c b/arch/arm/mach-at91/armv7/cpu.c index 8d86f97e3d..7843aed813 100644 --- a/arch/arm/mach-at91/armv7/cpu.c +++ b/arch/arm/mach-at91/armv7/cpu.c @@ -12,7 +12,6 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/hardware.h> -#include <asm/arch/at91_dbu.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_pit.h> #include <asm/arch/at91_gpbr.h> @@ -65,12 +64,14 @@ void enable_caches(void) dcache_enable(); } +#define ATMEL_CHIPID_CIDR_VERSION 0x1f + unsigned int get_chip_id(void) { - return readl(ATMEL_BASE_DBGU + AT91_DBU_CIDR) & ~AT91_DBU_CIDR_MASK; + return readl(ATMEL_CHIPID_CIDR) & ~ATMEL_CHIPID_CIDR_VERSION; } unsigned int get_extension_chip_id(void) { - return readl(ATMEL_BASE_DBGU + AT91_DBU_EXID); + return readl(ATMEL_CHIPID_EXID); } diff --git a/arch/arm/mach-at91/include/mach/at91_dbu.h b/arch/arm/mach-at91/include/mach/at91_dbu.h index 7346fc0569..3181138322 100644 --- a/arch/arm/mach-at91/include/mach/at91_dbu.h +++ b/arch/arm/mach-at91/include/mach/at91_dbu.h @@ -35,8 +35,4 @@ typedef struct at91_dbu { #define AT91_DBU_CID_ARCH_9xx 0x01900000 #define AT91_DBU_CID_ARCH_9XExx 0x02900000 -#define AT91_DBU_CIDR_MASK 0x1f -#define AT91_DBU_CIDR 0x40 -#define AT91_DBU_EXID 0x44 - #endif diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 8a3fb942f7..5a51be6288 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -153,8 +153,20 @@ typedef struct at91_pmc { #define AT91_PMC_IXR_MOSCSELS 0x00010000 #define AT91_PMC_PCR_PID_MASK (0x3f) +#define AT91_PMC_PCR_GCKCSS (0x7 << 8) +#define AT91_PMC_PCR_GCKCSS_SLOW_CLK (0x0 << 8) +#define AT91_PMC_PCR_GCKCSS_MAIN_CLK (0x1 << 8) +#define AT91_PMC_PCR_GCKCSS_PLLA_CLK (0x2 << 8) +#define AT91_PMC_PCR_GCKCSS_UPLL_CLK (0x3 << 8) +#define AT91_PMC_PCR_GCKCSS_MCK_CLK (0x4 << 8) +#define AT91_PMC_PCR_GCKCSS_AUDIO_CLK (0x5 << 8) #define AT91_PMC_PCR_CMD_WRITE (0x1 << 12) +#define AT91_PMC_PCR_DIV (0x3 << 16) +#define AT91_PMC_PCR_GCKDIV (0xff << 20) +#define AT91_PMC_PCR_GCKDIV_(x) ((x & 0xff) << 20) +#define AT91_PMC_PCR_GCKDIV_OFFSET 20 #define AT91_PMC_PCR_EN (0x1 << 28) +#define AT91_PMC_PCR_GCKEN (0x1 << 29) #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ @@ -236,6 +248,7 @@ typedef struct at91_pmc { #define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */ #define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */ #define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */ +#define AT91_PMC_GCKRDY (1 << 24) #define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */ #endif diff --git a/arch/arm/mach-at91/include/mach/atmel_sdhci.h b/arch/arm/mach-at91/include/mach/atmel_sdhci.h new file mode 100644 index 0000000000..9652bc20c8 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/atmel_sdhci.h @@ -0,0 +1,13 @@ +/* + * Copyright (c) 2015 Atmel Corporation + * Wenyou.Yang <wenyou.yang@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ATMEL_SDHCI_H +#define __ATMEL_SDHCI_H + +int atmel_sdhci_init(void *regbase, u32 id); + +#endif diff --git a/arch/arm/mach-at91/include/mach/clk.h b/arch/arm/mach-at91/include/mach/clk.h index 1d45e2dc11..ad839275ec 100644 --- a/arch/arm/mach-at91/include/mach/clk.h +++ b/arch/arm/mach-at91/include/mach/clk.h @@ -13,6 +13,13 @@ #include <asm/arch/at91_pmc.h> #include <asm/global_data.h> +#define GCK_CSS_SLOW_CLK 0 +#define GCK_CSS_MAIN_CLK 1 +#define GCK_CSS_PLLA_CLK 2 +#define GCK_CSS_UPLL_CLK 3 +#define GCK_CSS_MCK_CLK 4 +#define GCK_CSS_AUDIO_CLK 5 + static inline unsigned long get_cpu_clk_rate(void) { DECLARE_GLOBAL_DATA_PTR; @@ -119,4 +126,7 @@ static inline unsigned long get_pit_clk_rate(void) int at91_clock_init(unsigned long main_clock); void at91_periph_clk_enable(int id); void at91_periph_clk_disable(int id); +int at91_enable_periph_generated_clk(u32 id, u32 clk_source, u32 div); +u32 at91_get_periph_generated_clk(u32 id); + #endif /* __ASM_ARM_ARCH_CLK_H__ */ diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h index b749cb3359..33f6c97c11 100644 --- a/arch/arm/mach-at91/include/mach/sama5d3.h +++ b/arch/arm/mach-at91/include/mach/sama5d3.h @@ -158,6 +158,9 @@ #define ATMEL_BASE_RTC 0xfffffeb0 /* Reserved: 0xfffffee0 - 0xffffffff */ +#define ATMEL_CHIPID_CIDR 0xffffee40 +#define ATMEL_CHIPID_EXID 0xffffee44 + /* * Internal Memory. */ diff --git a/arch/arm/mach-at91/include/mach/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h index 7773ace439..3da8aff27e 100644 --- a/arch/arm/mach-at91/include/mach/sama5d4.h +++ b/arch/arm/mach-at91/include/mach/sama5d4.h @@ -144,6 +144,9 @@ #define ATMEL_BASE_PIOE 0xfc06d000 #define ATMEL_BASE_AIC 0xfc06e000 +#define ATMEL_CHIPID_CIDR 0xfc069040 +#define ATMEL_CHIPID_EXID 0xfc069044 + /* * Internal Memory. */ diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index 7a1aec45e7..afe6cc3edd 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -21,13 +21,6 @@ config TARGET_ZYNQ_MICROZED config TARGET_ZYNQ_PICOZED bool "Zynq PicoZed" -config TARGET_ZYNQ_ZC70X - bool "Zynq ZC702/ZC706 Board (deprecated)" - select ZYNQ_CUSTOM_INIT - help - This option is deprecated. Use TARGET_ZYNQ_ZC702 - or TARGET_ZYNQ_706. - config TARGET_ZYNQ_ZC702 bool "Zynq ZC702 Board" @@ -57,8 +50,7 @@ config SYS_CONFIG_NAME default "zynq_zed" if TARGET_ZYNQ_ZED default "zynq_microzed" if TARGET_ZYNQ_MICROZED default "zynq_picozed" if TARGET_ZYNQ_PICOZED - default "zynq_zc70x" if TARGET_ZYNQ_ZC702 || TARGET_ZYNQ_ZC706 \ - || TARGET_ZYNQ_ZC70X + default "zynq_zc70x" if TARGET_ZYNQ_ZC702 || TARGET_ZYNQ_ZC706 default "zynq_zc770" if TARGET_ZYNQ_ZC770 default "zynq_zybo" if TARGET_ZYNQ_ZYBO diff --git a/arch/arm/mach-zynq/spl.c b/arch/arm/mach-zynq/spl.c index 7bdac3b12d..723019d252 100644 --- a/arch/arm/mach-zynq/spl.c +++ b/arch/arm/mach-zynq/spl.c @@ -4,11 +4,12 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <debug_uart.h> #include <spl.h> #include <asm/io.h> -#include <asm/arch/hardware.h> #include <asm/spl.h> +#include <asm/arch/hardware.h> #include <asm/arch/sys_proto.h> DECLARE_GLOBAL_DATA_PTR; @@ -17,11 +18,12 @@ void board_init_f(ulong dummy) { ps7_init(); - /* Clear the BSS. */ - memset(__bss_start, 0, __bss_end - __bss_start); - arch_cpu_init(); - board_init_r(NULL, 0); + /* + * The debug UART can be used from this point: + * debug_uart_init(); + * printch('x'); + */ } #ifdef CONFIG_SPL_BOARD_INIT diff --git a/arch/arm/mach-zynq/u-boot-spl.lds b/arch/arm/mach-zynq/u-boot-spl.lds index 0f2f756f83..ecdf6a031e 100644 --- a/arch/arm/mach-zynq/u-boot-spl.lds +++ b/arch/arm/mach-zynq/u-boot-spl.lds @@ -38,10 +38,18 @@ SECTIONS } > .sram . = ALIGN(4); +#ifdef CONFIG_SPL_DM + .u_boot_list : { + KEEP(*(SORT(.u_boot_list_*_driver_*))); + KEEP(*(SORT(.u_boot_list_*_uclass_*))); + } > .sram + + . = ALIGN(4); +#endif . = .; - __image_copy_end = .; + _image_binary_end = .; _end = .; diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index ae0823af65..0b89157fca 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -149,6 +149,9 @@ config TARGET_XPEDITE550X config TARGET_UCP1020 bool "Support uCP1020" +config TARGET_CYRUS + bool "Support Varisys Cyrus" + endchoice source "board/freescale/b4860qds/Kconfig" @@ -185,6 +188,7 @@ source "board/gdsys/p1022/Kconfig" source "board/keymile/kmp204x/Kconfig" source "board/sbc8548/Kconfig" source "board/socrates/Kconfig" +source "board/varisys/cyrus/Kconfig" source "board/xes/xpedite520x/Kconfig" source "board/xes/xpedite537x/Kconfig" source "board/xes/xpedite550x/Kconfig" |
