summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/cpu/armv7/ls102xa/fdt.c17
-rw-r--r--arch/powerpc/cpu/mpc8xxx/fdt.c170
-rw-r--r--arch/powerpc/include/asm/config.h1
3 files changed, 18 insertions, 170 deletions
diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c
index 989780d273..0fda694bdd 100644
--- a/arch/arm/cpu/armv7/ls102xa/fdt.c
+++ b/arch/arm/cpu/armv7/ls102xa/fdt.c
@@ -15,6 +15,8 @@
#include <fsl_esdhc.h>
#endif
#include <tsec.h>
+#include <asm/arch/immap_ls102xa.h>
+#include <fsl_sec.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -77,9 +79,24 @@ void ft_cpu_setup(void *blob, bd_t *bd)
int off;
int val;
const char *sysclk_path;
+ struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+ unsigned int svr;
+ svr = in_be32(&gur->svr);
unsigned long busclk = get_bus_freq(0);
+ /* delete crypto node if not on an E-processor */
+ if (!IS_E_PROCESSOR(svr))
+ fdt_fixup_crypto_node(blob, 0);
+#if CONFIG_SYS_FSL_SEC_COMPAT >= 4
+ else {
+ ccsr_sec_t __iomem *sec;
+
+ sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+ fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms));
+ }
+#endif
+
fdt_fixup_ethernet(blob);
off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 1c63f93f4d..9cc1676b60 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -73,176 +73,6 @@ void ft_fixup_num_cores(void *blob) {
}
#endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
-/*
- * update crypto node properties to a specified revision of the SEC
- * called with sec_rev == 0 if not on an E processor
- */
-#if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */
-void fdt_fixup_crypto_node(void *blob, int sec_rev)
-{
- static const struct sec_rev_prop {
- u32 sec_rev;
- u32 num_channels;
- u32 channel_fifo_len;
- u32 exec_units_mask;
- u32 descriptor_types_mask;
- } sec_rev_prop_list [] = {
- { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */
- { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */
- { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */
- { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */
- { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */
- { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */
- { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */
- };
- static char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
- sizeof("fsl,secX.Y")];
- int crypto_node, sec_idx, err;
- char *p;
- u32 val;
-
- /* locate crypto node based on lowest common compatible */
- crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0");
- if (crypto_node == -FDT_ERR_NOTFOUND)
- return;
-
- /* delete it if not on an E-processor */
- if (crypto_node > 0 && !sec_rev) {
- fdt_del_node(blob, crypto_node);
- return;
- }
-
- /* else we got called for possible uprev */
- for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++)
- if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev)
- break;
-
- if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) {
- puts("warning: unknown SEC revision number\n");
- return;
- }
-
- val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels);
- err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4);
- if (err < 0)
- printf("WARNING: could not set crypto property: %s\n",
- fdt_strerror(err));
-
- val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask);
- err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4);
- if (err < 0)
- printf("WARNING: could not set crypto property: %s\n",
- fdt_strerror(err));
-
- val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask);
- err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4);
- if (err < 0)
- printf("WARNING: could not set crypto property: %s\n",
- fdt_strerror(err));
-
- val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len);
- err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4);
- if (err < 0)
- printf("WARNING: could not set crypto property: %s\n",
- fdt_strerror(err));
-
- val = 0;
- while (sec_idx >= 0) {
- p = compat_strlist + val;
- val += sprintf(p, "fsl,sec%d.%d",
- (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8,
- sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1;
- sec_idx--;
- }
- err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val);
- if (err < 0)
- printf("WARNING: could not set crypto property: %s\n",
- fdt_strerror(err));
-}
-#elif CONFIG_SYS_FSL_SEC_COMPAT >= 4 /* SEC4 */
-static u8 caam_get_era(void)
-{
- static const struct {
- u16 ip_id;
- u8 maj_rev;
- u8 era;
- } caam_eras[] = {
- {0x0A10, 1, 1},
- {0x0A10, 2, 2},
- {0x0A12, 1, 3},
- {0x0A14, 1, 3},
- {0x0A14, 2, 4},
- {0x0A16, 1, 4},
- {0x0A10, 3, 4},
- {0x0A11, 1, 4},
- {0x0A18, 1, 4},
- {0x0A11, 2, 5},
- {0x0A12, 2, 5},
- {0x0A13, 1, 5},
- {0x0A1C, 1, 5}
- };
-
- ccsr_sec_t __iomem *sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
- u32 secvid_ms = sec_in32(&sec->secvid_ms);
- u32 ccbvid = sec_in32(&sec->ccbvid);
- u16 ip_id = (secvid_ms & SEC_SECVID_MS_IPID_MASK) >>
- SEC_SECVID_MS_IPID_SHIFT;
- u8 maj_rev = (secvid_ms & SEC_SECVID_MS_MAJ_REV_MASK) >>
- SEC_SECVID_MS_MAJ_REV_SHIFT;
- u8 era = (ccbvid & SEC_CCBVID_ERA_MASK) >> SEC_CCBVID_ERA_SHIFT;
-
- int i;
-
- if (era) /* This is '0' prior to CAAM ERA-6 */
- return era;
-
- for (i = 0; i < ARRAY_SIZE(caam_eras); i++)
- if (caam_eras[i].ip_id == ip_id &&
- caam_eras[i].maj_rev == maj_rev)
- return caam_eras[i].era;
-
- return 0;
-}
-
-static void fdt_fixup_crypto_era(void *blob, u32 era)
-{
- int err;
- int crypto_node;
-
- crypto_node = fdt_path_offset(blob, "crypto");
- if (crypto_node < 0) {
- printf("WARNING: Missing crypto node\n");
- return;
- }
-
- err = fdt_setprop(blob, crypto_node, "fsl,sec-era", &era,
- sizeof(era));
- if (err < 0) {
- printf("ERROR: could not set fsl,sec-era property: %s\n",
- fdt_strerror(err));
- }
-}
-
-void fdt_fixup_crypto_node(void *blob, int sec_rev)
-{
- u8 era;
-
- if (!sec_rev) {
- fdt_del_node_and_alias(blob, "crypto");
- return;
- }
-
- /* Add SEC ERA information in compatible */
- era = caam_get_era();
- if (era) {
- fdt_fixup_crypto_era(blob, era);
- } else {
- printf("WARNING: Unable to get ERA for CAAM rev: %d\n",
- sec_rev);
- }
-}
-#endif
-
int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
{
return fdt_setprop_string(blob, offset, "phy-connection-type",
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index 423a6fb8dc..65496d0d90 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -75,6 +75,7 @@
* SEC (crypto unit) major compatible version determination
*/
#if defined(CONFIG_MPC83xx)
+#define CONFIG_SYS_FSL_SEC_BE
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#endif
OpenPOWER on IntegriCloud