summaryrefslogtreecommitdiffstats
path: root/arch/x86/include/asm/arch-quark/quark.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/include/asm/arch-quark/quark.h')
-rw-r--r--arch/x86/include/asm/arch-quark/quark.h85
1 files changed, 85 insertions, 0 deletions
diff --git a/arch/x86/include/asm/arch-quark/quark.h b/arch/x86/include/asm/arch-quark/quark.h
index c9979280b6..5d81976998 100644
--- a/arch/x86/include/asm/arch-quark/quark.h
+++ b/arch/x86/include/asm/arch-quark/quark.h
@@ -12,6 +12,8 @@
#define MSG_PORT_HOST_BRIDGE 0x03
#define MSG_PORT_RMU 0x04
#define MSG_PORT_MEM_MGR 0x05
+#define MSG_PORT_USB_AFE 0x14
+#define MSG_PORT_PCIE_AFE 0x16
#define MSG_PORT_SOC_UNIT 0x31
/* Port 0x00: Memory Arbiter Message Port Registers */
@@ -48,6 +50,28 @@
#define ESRAM_BLK_CTRL 0x82
#define ESRAM_BLOCK_MODE 0x10000000
+/* Port 0x14: USB2 AFE Unit Port Registers */
+
+#define USB2_GLOBAL_PORT 0x4001
+#define USB2_PLL1 0x7f02
+#define USB2_PLL2 0x7f03
+#define USB2_COMPBG 0x7f04
+
+/* Port 0x16: PCIe AFE Unit Port Registers */
+
+#define PCIE_RXPICTRL0_L0 0x2080
+#define PCIE_RXPICTRL0_L1 0x2180
+
+/* Port 0x31: SoC Unit Port Registers */
+
+/* PCIe Controller Config */
+#define PCIE_CFG 0x36
+#define PCIE_CTLR_PRI_RST 0x00010000
+#define PCIE_PHY_SB_RST 0x00020000
+#define PCIE_CTLR_SB_RST 0x00040000
+#define PCIE_PHY_LANE_RST 0x00090000
+#define PCIE_CTLR_MAIN_RST 0x00100000
+
/* DRAM */
#define DRAM_BASE 0x00000000
#define DRAM_MAX_SIZE 0x80000000
@@ -89,6 +113,67 @@ struct quark_rcba {
u16 d20d21_ir;
};
+#include <asm/io.h>
+#include <asm/pci.h>
+
+/**
+ * qrk_pci_read_config_dword() - Read a configuration value
+ *
+ * @dev: PCI device address: bus, device and function
+ * @offset: Dword offset within the device's configuration space
+ * @valuep: Place to put the returned value
+ *
+ * Note: This routine is inlined to provide better performance on Quark
+ */
+static inline void qrk_pci_read_config_dword(pci_dev_t dev, int offset,
+ u32 *valuep)
+{
+ outl(dev | offset | PCI_CFG_EN, PCI_REG_ADDR);
+ *valuep = inl(PCI_REG_DATA);
+}
+
+/**
+ * qrk_pci_write_config_dword() - Write a PCI configuration value
+ *
+ * @dev: PCI device address: bus, device and function
+ * @offset: Dword offset within the device's configuration space
+ * @value: Value to write
+ *
+ * Note: This routine is inlined to provide better performance on Quark
+ */
+static inline void qrk_pci_write_config_dword(pci_dev_t dev, int offset,
+ u32 value)
+{
+ outl(dev | offset | PCI_CFG_EN, PCI_REG_ADDR);
+ outl(value, PCI_REG_DATA);
+}
+
+/**
+ * board_assert_perst() - Assert the PERST# pin
+ *
+ * The CPU interface to the PERST# signal on Quark is platform dependent.
+ * Board-specific codes need supply this routine to assert PCIe slot reset.
+ *
+ * The tricky part in this routine is that any APIs that may trigger PCI
+ * enumeration process are strictly forbidden, as any access to PCIe root
+ * port's configuration registers will cause system hang while it is held
+ * in reset.
+ */
+void board_assert_perst(void);
+
+/**
+ * board_deassert_perst() - De-assert the PERST# pin
+ *
+ * The CPU interface to the PERST# signal on Quark is platform dependent.
+ * Board-specific codes need supply this routine to de-assert PCIe slot reset.
+ *
+ * The tricky part in this routine is that any APIs that may trigger PCI
+ * enumeration process are strictly forbidden, as any access to PCIe root
+ * port's configuration registers will cause system hang while it is held
+ * in reset.
+ */
+void board_deassert_perst(void);
+
#endif /* __ASSEMBLY__ */
#endif /* _QUARK_H_ */
OpenPOWER on IntegriCloud