summaryrefslogtreecommitdiffstats
path: root/arch/x86/cpu
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/cpu')
-rw-r--r--arch/x86/cpu/Makefile1
-rw-r--r--arch/x86/cpu/coreboot/coreboot.c42
-rw-r--r--arch/x86/cpu/coreboot/ipchecksum.c2
-rw-r--r--arch/x86/cpu/coreboot/pci.c22
-rw-r--r--arch/x86/cpu/coreboot/sdram.c15
-rw-r--r--arch/x86/cpu/coreboot/tables.c6
-rw-r--r--arch/x86/cpu/cpu.c301
-rw-r--r--arch/x86/cpu/interrupts.c2
-rw-r--r--arch/x86/cpu/ivybridge/Kconfig172
-rw-r--r--arch/x86/cpu/ivybridge/Makefile16
-rw-r--r--arch/x86/cpu/ivybridge/car.S178
-rw-r--r--arch/x86/cpu/ivybridge/cpu.c357
-rw-r--r--arch/x86/cpu/ivybridge/early_init.c145
-rw-r--r--arch/x86/cpu/ivybridge/early_me.c191
-rw-r--r--arch/x86/cpu/ivybridge/lpc.c48
-rw-r--r--arch/x86/cpu/ivybridge/me_status.c195
-rw-r--r--arch/x86/cpu/ivybridge/microcode_intel.c151
-rw-r--r--arch/x86/cpu/ivybridge/pci.c60
-rw-r--r--arch/x86/cpu/ivybridge/report_platform.c89
-rw-r--r--arch/x86/cpu/ivybridge/sdram.c571
-rw-r--r--arch/x86/cpu/pci.c98
-rw-r--r--arch/x86/cpu/start.S40
-rw-r--r--arch/x86/cpu/start16.S18
23 files changed, 2595 insertions, 125 deletions
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile
index 8dd7b06c5d..2b9e9b9cf0 100644
--- a/arch/x86/cpu/Makefile
+++ b/arch/x86/cpu/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_X86_RESET_VECTOR) += resetvec.o start16.o
obj-y += interrupts.o cpu.o call64.o
obj-$(CONFIG_SYS_COREBOOT) += coreboot/
+obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/x86/cpu/coreboot/coreboot.c b/arch/x86/cpu/coreboot/coreboot.c
index e24f13afaf..2df72884f9 100644
--- a/arch/x86/cpu/coreboot/coreboot.c
+++ b/arch/x86/cpu/coreboot/coreboot.c
@@ -13,25 +13,25 @@
#include <ns16550.h>
#include <asm/msr.h>
#include <asm/cache.h>
+#include <asm/cpu.h>
#include <asm/io.h>
-#include <asm/arch-coreboot/tables.h>
-#include <asm/arch-coreboot/sysinfo.h>
+#include <asm/arch/tables.h>
+#include <asm/arch/sysinfo.h>
#include <asm/arch/timestamp.h>
DECLARE_GLOBAL_DATA_PTR;
-/*
- * Miscellaneous platform dependent initializations
- */
-int cpu_init_f(void)
+int arch_cpu_init(void)
{
int ret = get_coreboot_info(&lib_sysinfo);
- if (ret != 0)
+ if (ret != 0) {
printf("Failed to parse coreboot tables.\n");
+ return ret;
+ }
timestamp_init();
- return ret;
+ return x86_cpu_init_f();
}
int board_early_init_f(void)
@@ -50,27 +50,9 @@ int board_early_init_r(void)
return 0;
}
-void show_boot_progress(int val)
+int print_cpuinfo(void)
{
-#if MIN_PORT80_KCLOCKS_DELAY
- /*
- * Scale the time counter reading to avoid using 64 bit arithmetics.
- * Can't use get_timer() here becuase it could be not yet
- * initialized or even implemented.
- */
- if (!gd->arch.tsc_prev) {
- gd->arch.tsc_base_kclocks = rdtsc() / 1000;
- gd->arch.tsc_prev = 0;
- } else {
- uint32_t now;
-
- do {
- now = rdtsc() / 1000 - gd->arch.tsc_base_kclocks;
- } while (now < (gd->arch.tsc_prev + MIN_PORT80_KCLOCKS_DELAY));
- gd->arch.tsc_prev = now;
- }
-#endif
- outb(val, 0x80);
+ return default_print_cpuinfo();
}
int last_stage_init(void)
@@ -98,7 +80,7 @@ int board_eth_init(bd_t *bis)
#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg))
#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1)
-int board_final_cleanup(void)
+void board_final_cleanup(void)
{
/* Un-cache the ROM so the kernel has one
* more MTRR available.
@@ -120,8 +102,6 @@ int board_final_cleanup(void)
/* Issue SMI to Coreboot to lock down ME and registers */
printf("Finalizing Coreboot\n");
outb(0xcb, 0xb2);
-
- return 0;
}
void panic_puts(const char *str)
diff --git a/arch/x86/cpu/coreboot/ipchecksum.c b/arch/x86/cpu/coreboot/ipchecksum.c
index 57733d8f0d..5f6c00945b 100644
--- a/arch/x86/cpu/coreboot/ipchecksum.c
+++ b/arch/x86/cpu/coreboot/ipchecksum.c
@@ -30,7 +30,7 @@
*/
#include <compiler.h>
-#include <asm/arch-coreboot/ipchecksum.h>
+#include <asm/arch/ipchecksum.h>
unsigned short ipchksum(const void *vptr, unsigned long nbytes)
{
diff --git a/arch/x86/cpu/coreboot/pci.c b/arch/x86/cpu/coreboot/pci.c
index b35d70cf17..6a3dd93914 100644
--- a/arch/x86/cpu/coreboot/pci.c
+++ b/arch/x86/cpu/coreboot/pci.c
@@ -13,8 +13,6 @@
#include <pci.h>
#include <asm/pci.h>
-static struct pci_controller coreboot_hose;
-
static void config_pci_bridge(struct pci_controller *hose, pci_dev_t dev,
struct pci_config_table *table)
{
@@ -31,19 +29,13 @@ static struct pci_config_table pci_coreboot_config_table[] = {
{}
};
-void pci_init_board(void)
+void board_pci_setup_hose(struct pci_controller *hose)
{
- coreboot_hose.config_table = pci_coreboot_config_table;
- coreboot_hose.first_busno = 0;
- coreboot_hose.last_busno = 0;
-
- pci_set_region(coreboot_hose.regions + 0, 0x0, 0x0, 0xffffffff,
- PCI_REGION_MEM);
- coreboot_hose.region_count = 1;
-
- pci_setup_type1(&coreboot_hose);
-
- pci_register_hose(&coreboot_hose);
+ hose->config_table = pci_coreboot_config_table;
+ hose->first_busno = 0;
+ hose->last_busno = 0;
- pci_hose_scan(&coreboot_hose);
+ pci_set_region(hose->regions + 0, 0x0, 0x0, 0xffffffff,
+ PCI_REGION_MEM);
+ hose->region_count = 1;
}
diff --git a/arch/x86/cpu/coreboot/sdram.c b/arch/x86/cpu/coreboot/sdram.c
index 3140b6bb91..e98a2302e7 100644
--- a/arch/x86/cpu/coreboot/sdram.c
+++ b/arch/x86/cpu/coreboot/sdram.c
@@ -11,8 +11,10 @@
#include <asm/e820.h>
#include <asm/u-boot-x86.h>
#include <asm/global_data.h>
+#include <asm/init_helpers.h>
#include <asm/processor.h>
#include <asm/sections.h>
+#include <asm/zimage.h>
#include <asm/arch/sysinfo.h>
#include <asm/arch/tables.h>
@@ -79,7 +81,7 @@ ulong board_get_usable_ram_top(ulong total_size)
return (ulong)dest_addr;
}
-int dram_init_f(void)
+int dram_init(void)
{
int i;
phys_size_t ram_size = 0;
@@ -94,10 +96,11 @@ int dram_init_f(void)
gd->ram_size = ram_size;
if (ram_size == 0)
return -1;
- return 0;
+
+ return calculate_relocation_address();
}
-int dram_init_banksize(void)
+void dram_init_banksize(void)
{
int i, j;
@@ -114,10 +117,4 @@ int dram_init_banksize(void)
}
}
}
- return 0;
-}
-
-int dram_init(void)
-{
- return dram_init_banksize();
}
diff --git a/arch/x86/cpu/coreboot/tables.c b/arch/x86/cpu/coreboot/tables.c
index 0d91adc5e4..92b75286b1 100644
--- a/arch/x86/cpu/coreboot/tables.c
+++ b/arch/x86/cpu/coreboot/tables.c
@@ -8,9 +8,9 @@
*/
#include <common.h>
-#include <asm/arch-coreboot/ipchecksum.h>
-#include <asm/arch-coreboot/sysinfo.h>
-#include <asm/arch-coreboot/tables.h>
+#include <asm/arch/ipchecksum.h>
+#include <asm/arch/sysinfo.h>
+#include <asm/arch/tables.h>
/*
* This needs to be in the .data section so that it's copied over during
diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c
index 2e252532d6..b391b7ade4 100644
--- a/arch/x86/cpu/cpu.c
+++ b/arch/x86/cpu/cpu.c
@@ -13,6 +13,9 @@
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Alex Zuepke <azu@sysgo.de>
*
+ * Part of this file is adapted from coreboot
+ * src/arch/x86/lib/cpu.c
+ *
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -22,11 +25,14 @@
#include <malloc.h>
#include <asm/control_regs.h>
#include <asm/cpu.h>
+#include <asm/post.h>
#include <asm/processor.h>
#include <asm/processor-flags.h>
#include <asm/interrupt.h>
#include <linux/compiler.h>
+DECLARE_GLOBAL_DATA_PTR;
+
/*
* Constructor for a conventional segment GDT (or LDT) entry
* This is a macro so it can be used in initialisers
@@ -43,6 +49,52 @@ struct gdt_ptr {
u32 ptr;
} __packed;
+struct cpu_device_id {
+ unsigned vendor;
+ unsigned device;
+};
+
+struct cpuinfo_x86 {
+ uint8_t x86; /* CPU family */
+ uint8_t x86_vendor; /* CPU vendor */
+ uint8_t x86_model;
+ uint8_t x86_mask;
+};
+
+/*
+ * List of cpu vendor strings along with their normalized
+ * id values.
+ */
+static struct {
+ int vendor;
+ const char *name;
+} x86_vendors[] = {
+ { X86_VENDOR_INTEL, "GenuineIntel", },
+ { X86_VENDOR_CYRIX, "CyrixInstead", },
+ { X86_VENDOR_AMD, "AuthenticAMD", },
+ { X86_VENDOR_UMC, "UMC UMC UMC ", },
+ { X86_VENDOR_NEXGEN, "NexGenDriven", },
+ { X86_VENDOR_CENTAUR, "CentaurHauls", },
+ { X86_VENDOR_RISE, "RiseRiseRise", },
+ { X86_VENDOR_TRANSMETA, "GenuineTMx86", },
+ { X86_VENDOR_TRANSMETA, "TransmetaCPU", },
+ { X86_VENDOR_NSC, "Geode by NSC", },
+ { X86_VENDOR_SIS, "SiS SiS SiS ", },
+};
+
+static const char *const x86_vendor_name[] = {
+ [X86_VENDOR_INTEL] = "Intel",
+ [X86_VENDOR_CYRIX] = "Cyrix",
+ [X86_VENDOR_AMD] = "AMD",
+ [X86_VENDOR_UMC] = "UMC",
+ [X86_VENDOR_NEXGEN] = "NexGen",
+ [X86_VENDOR_CENTAUR] = "Centaur",
+ [X86_VENDOR_RISE] = "Rise",
+ [X86_VENDOR_TRANSMETA] = "Transmeta",
+ [X86_VENDOR_NSC] = "NSC",
+ [X86_VENDOR_SIS] = "SiS",
+};
+
static void load_ds(u32 segment)
{
asm volatile("movl %0, %%ds" : : "r" (segment * X86_GDT_ENTRY_SIZE));
@@ -115,6 +167,129 @@ int __weak x86_cleanup_before_linux(void)
return 0;
}
+/*
+ * Cyrix CPUs without cpuid or with cpuid not yet enabled can be detected
+ * by the fact that they preserve the flags across the division of 5/2.
+ * PII and PPro exhibit this behavior too, but they have cpuid available.
+ */
+
+/*
+ * Perform the Cyrix 5/2 test. A Cyrix won't change
+ * the flags, while other 486 chips will.
+ */
+static inline int test_cyrix_52div(void)
+{
+ unsigned int test;
+
+ __asm__ __volatile__(
+ "sahf\n\t" /* clear flags (%eax = 0x0005) */
+ "div %b2\n\t" /* divide 5 by 2 */
+ "lahf" /* store flags into %ah */
+ : "=a" (test)
+ : "0" (5), "q" (2)
+ : "cc");
+
+ /* AH is 0x02 on Cyrix after the divide.. */
+ return (unsigned char) (test >> 8) == 0x02;
+}
+
+/*
+ * Detect a NexGen CPU running without BIOS hypercode new enough
+ * to have CPUID. (Thanks to Herbert Oppmann)
+ */
+
+static int deep_magic_nexgen_probe(void)
+{
+ int ret;
+
+ __asm__ __volatile__ (
+ " movw $0x5555, %%ax\n"
+ " xorw %%dx,%%dx\n"
+ " movw $2, %%cx\n"
+ " divw %%cx\n"
+ " movl $0, %%eax\n"
+ " jnz 1f\n"
+ " movl $1, %%eax\n"
+ "1:\n"
+ : "=a" (ret) : : "cx", "dx");
+ return ret;
+}
+
+static bool has_cpuid(void)
+{
+ return flag_is_changeable_p(X86_EFLAGS_ID);
+}
+
+static int build_vendor_name(char *vendor_name)
+{
+ struct cpuid_result result;
+ result = cpuid(0x00000000);
+ unsigned int *name_as_ints = (unsigned int *)vendor_name;
+
+ name_as_ints[0] = result.ebx;
+ name_as_ints[1] = result.edx;
+ name_as_ints[2] = result.ecx;
+
+ return result.eax;
+}
+
+static void identify_cpu(struct cpu_device_id *cpu)
+{
+ char vendor_name[16];
+ int i;
+
+ vendor_name[0] = '\0'; /* Unset */
+ cpu->device = 0; /* fix gcc 4.4.4 warning */
+
+ /* Find the id and vendor_name */
+ if (!has_cpuid()) {
+ /* Its a 486 if we can modify the AC flag */
+ if (flag_is_changeable_p(X86_EFLAGS_AC))
+ cpu->device = 0x00000400; /* 486 */
+ else
+ cpu->device = 0x00000300; /* 386 */
+ if ((cpu->device == 0x00000400) && test_cyrix_52div()) {
+ memcpy(vendor_name, "CyrixInstead", 13);
+ /* If we ever care we can enable cpuid here */
+ }
+ /* Detect NexGen with old hypercode */
+ else if (deep_magic_nexgen_probe())
+ memcpy(vendor_name, "NexGenDriven", 13);
+ }
+ if (has_cpuid()) {
+ int cpuid_level;
+
+ cpuid_level = build_vendor_name(vendor_name);
+ vendor_name[12] = '\0';
+
+ /* Intel-defined flags: level 0x00000001 */
+ if (cpuid_level >= 0x00000001) {
+ cpu->device = cpuid_eax(0x00000001);
+ } else {
+ /* Have CPUID level 0 only unheard of */
+ cpu->device = 0x00000400;
+ }
+ }
+ cpu->vendor = X86_VENDOR_UNKNOWN;
+ for (i = 0; i < ARRAY_SIZE(x86_vendors); i++) {
+ if (memcmp(vendor_name, x86_vendors[i].name, 12) == 0) {
+ cpu->vendor = x86_vendors[i].vendor;
+ break;
+ }
+ }
+}
+
+static inline void get_fms(struct cpuinfo_x86 *c, uint32_t tfms)
+{
+ c->x86 = (tfms >> 8) & 0xf;
+ c->x86_model = (tfms >> 4) & 0xf;
+ c->x86_mask = tfms & 0xf;
+ if (c->x86 == 0xf)
+ c->x86 += (tfms >> 20) & 0xff;
+ if (c->x86 >= 0x6)
+ c->x86_model += ((tfms >> 16) & 0xF) << 4;
+}
+
int x86_cpu_init_f(void)
{
const u32 em_rst = ~X86_CR0_EM;
@@ -128,9 +303,22 @@ int x86_cpu_init_f(void)
"movl %%eax, %%cr0\n" \
: : "i" (em_rst), "i" (mp_ne_set) : "eax");
+ /* identify CPU via cpuid and store the decoded info into gd->arch */
+ if (has_cpuid()) {
+ struct cpu_device_id cpu;
+ struct cpuinfo_x86 c;
+
+ identify_cpu(&cpu);
+ get_fms(&c, cpu.device);
+ gd->arch.x86 = c.x86;
+ gd->arch.x86_vendor = cpu.vendor;
+ gd->arch.x86_model = c.x86_model;
+ gd->arch.x86_mask = c.x86_mask;
+ gd->arch.x86_device = cpu.device;
+ }
+
return 0;
}
-int cpu_init_f(void) __attribute__((weak, alias("x86_cpu_init_f")));
int x86_cpu_init_r(void)
{
@@ -198,14 +386,13 @@ asm(".globl generate_gpf\n"
"generate_gpf:\n"
"ljmp $0x70, $0x47114711\n");
-void __reset_cpu(ulong addr)
+__weak void reset_cpu(ulong addr)
{
printf("Resetting using x86 Triple Fault\n");
set_vector(13, generate_gpf); /* general protection fault handler */
set_vector(8, generate_gpf); /* double fault handler */
generate_gpf(); /* start the show */
}
-void reset_cpu(ulong addr) __attribute__((weak, alias("__reset_cpu")));
int dcache_status(void)
{
@@ -279,66 +466,63 @@ void cpu_disable_paging_pae(void)
: "eax");
}
-static bool has_cpuid(void)
+static bool can_detect_long_mode(void)
{
- unsigned long flag;
-
- asm volatile("pushf\n" \
- "pop %%eax\n"
- "mov %%eax, %%ecx\n" /* ecx = flags */
- "xor %1, %%eax\n"
- "push %%eax\n"
- "popf\n" /* flags ^= $2 */
- "pushf\n"
- "pop %%eax\n" /* eax = flags */
- "push %%ecx\n"
- "popf\n" /* flags = ecx */
- "xor %%ecx, %%eax\n"
- "mov %%eax, %0"
- : "=r" (flag)
- : "i" (1 << 21)
- : "eax", "ecx", "memory");
+ return cpuid_eax(0x80000000) > 0x80000000UL;
+}
- return flag != 0;
+static bool has_long_mode(void)
+{
+ return cpuid_edx(0x80000001) & (1 << 29) ? true : false;
}
-static bool can_detect_long_mode(void)
+int cpu_has_64bit(void)
{
- unsigned long flag;
+ return has_cpuid() && can_detect_long_mode() &&
+ has_long_mode();
+}
- asm volatile("mov $0x80000000, %%eax\n"
- "cpuid\n"
- "mov %%eax, %0"
- : "=r" (flag)
- :
- : "eax", "ebx", "ecx", "edx", "memory");
+const char *cpu_vendor_name(int vendor)
+{
+ const char *name;
+ name = "<invalid cpu vendor>";
+ if ((vendor < (ARRAY_SIZE(x86_vendor_name))) &&
+ (x86_vendor_name[vendor] != 0))
+ name = x86_vendor_name[vendor];
- return flag > 0x80000000UL;
+ return name;
}
-static bool has_long_mode(void)
+char *cpu_get_name(char *name)
{
- unsigned long flag;
+ unsigned int *name_as_ints = (unsigned int *)name;
+ struct cpuid_result regs;
+ char *ptr;
+ int i;
- asm volatile("mov $0x80000001, %%eax\n"
- "cpuid\n"
- "mov %%edx, %0"
- : "=r" (flag)
- :
- : "eax", "ebx", "ecx", "edx", "memory");
+ /* This bit adds up to 48 bytes */
+ for (i = 0; i < 3; i++) {
+ regs = cpuid(0x80000002 + i);
+ name_as_ints[i * 4 + 0] = regs.eax;
+ name_as_ints[i * 4 + 1] = regs.ebx;
+ name_as_ints[i * 4 + 2] = regs.ecx;
+ name_as_ints[i * 4 + 3] = regs.edx;
+ }
+ name[CPU_MAX_NAME_LEN - 1] = '\0';
- return flag & (1 << 29) ? true : false;
-}
+ /* Skip leading spaces. */
+ ptr = name;
+ while (*ptr == ' ')
+ ptr++;
-int cpu_has_64bit(void)
-{
- return has_cpuid() && can_detect_long_mode() &&
- has_long_mode();
+ return ptr;
}
-int print_cpuinfo(void)
+int default_print_cpuinfo(void)
{
- printf("CPU: %s\n", cpu_has_64bit() ? "x86_64" : "x86");
+ printf("CPU: %s, vendor %s, device %xh\n",
+ cpu_has_64bit() ? "x86_64" : "x86",
+ cpu_vendor_name(gd->arch.x86_vendor), gd->arch.x86_device);
return 0;
}
@@ -384,3 +568,26 @@ int cpu_jump_to_64bit(ulong setup_base, ulong target)
return -EFAULT;
}
+
+void show_boot_progress(int val)
+{
+#if MIN_PORT80_KCLOCKS_DELAY
+ /*
+ * Scale the time counter reading to avoid using 64 bit arithmetics.
+ * Can't use get_timer() here becuase it could be not yet
+ * initialized or even implemented.
+ */
+ if (!gd->arch.tsc_prev) {
+ gd->arch.tsc_base_kclocks = rdtsc() / 1000;
+ gd->arch.tsc_prev = 0;
+ } else {
+ uint32_t now;
+
+ do {
+ now = rdtsc() / 1000 - gd->arch.tsc_base_kclocks;
+ } while (now < (gd->arch.tsc_prev + MIN_PORT80_KCLOCKS_DELAY));
+ gd->arch.tsc_prev = now;
+ }
+#endif
+ outb(val, POST_PORT);
+}
diff --git a/arch/x86/cpu/interrupts.c b/arch/x86/cpu/interrupts.c
index 6f3d85fab0..51e2c5923a 100644
--- a/arch/x86/cpu/interrupts.c
+++ b/arch/x86/cpu/interrupts.c
@@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR;
"pushl $"#x"\n" \
"jmp irq_common_entry\n"
-void dump_regs(struct irq_regs *regs)
+static void dump_regs(struct irq_regs *regs)
{
unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
unsigned long d0, d1, d2, d3, d6, d7;
diff --git a/arch/x86/cpu/ivybridge/Kconfig b/arch/x86/cpu/ivybridge/Kconfig
new file mode 100644
index 0000000000..afca9579da
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/Kconfig
@@ -0,0 +1,172 @@
+#
+# From Coreboot src/northbridge/intel/sandybridge/Kconfig
+#
+# Copyright (C) 2010 Google Inc.
+#
+# SPDX-License-Identifier: GPL-2.0
+
+
+config NORTHBRIDGE_INTEL_SANDYBRIDGE
+ bool
+ select CACHE_MRC_BIN
+ select CPU_INTEL_MODEL_206AX
+
+config NORTHBRIDGE_INTEL_IVYBRIDGE
+ bool
+ select CACHE_MRC_BIN
+ select CPU_INTEL_MODEL_306AX
+
+if NORTHBRIDGE_INTEL_SANDYBRIDGE
+
+config VGA_BIOS_ID
+ string
+ default "8086,0106"
+
+config CACHE_MRC_SIZE_KB
+ int
+ default 256
+
+config MRC_CACHE_BASE
+ hex
+ default 0xff800000
+
+config MRC_CACHE_LOCATION
+ hex
+ depends on !CHROMEOS
+ default 0x1ec000
+
+config MRC_CACHE_SIZE
+ hex
+ depends on !CHROMEOS
+ default 0x10000
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xff7f0000
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x10000
+
+endif
+
+if NORTHBRIDGE_INTEL_IVYBRIDGE
+
+config VGA_BIOS_ID
+ string
+ default "8086,0166"
+
+config EXTERNAL_MRC_BLOB
+ bool
+ default n
+
+config CACHE_MRC_SIZE_KB
+ int
+ default 512
+
+config MRC_CACHE_BASE
+ hex
+ default 0xff800000
+
+config MRC_CACHE_LOCATION
+ hex
+ depends on !CHROMEOS
+ default 0x370000
+
+config MRC_CACHE_SIZE
+ hex
+ depends on !CHROMEOS
+ default 0x10000
+
+config DCACHE_RAM_BASE
+ hex
+ default 0xff7e0000
+
+config DCACHE_RAM_SIZE
+ hex
+ default 0x20000
+
+endif
+
+if NORTHBRIDGE_INTEL_SANDYBRIDGE || NORTHBRIDGE_INTEL_IVYBRIDGE
+
+config HAVE_MRC
+ bool "Add a System Agent binary"
+ help
+ Select this option to add a System Agent binary to
+ the resulting U-Boot image. MRC stands for Memory Reference Code.
+ It is a binary blob which U-Boot uses to set up SDRAM.
+
+ Note: Without this binary U-Boot will not be able to set up its
+ SDRAM so will not boot.
+
+config DCACHE_RAM_MRC_VAR_SIZE
+ hex
+ default 0x4000
+ help
+ This is the amount of CAR (Cache as RAM) reserved for use by the
+ memory reference code. This should be set to 16KB (0x4000 hex)
+ so that MRC has enough space to run.
+
+config MRC_FILE
+ string "Intel System Agent path and filename"
+ depends on HAVE_MRC
+ default "systemagent-ivybridge.bin" if NORTHBRIDGE_INTEL_IVYBRIDGE
+ default "systemagent-sandybridge.bin" if NORTHBRIDGE_INTEL_SANDYBRIDGE
+ help
+ The path and filename of the file to use as System Agent
+ binary.
+
+config CPU_SPECIFIC_OPTIONS
+ def_bool y
+ select SMM_TSEG
+ select ARCH_BOOTBLOCK_X86_32
+ select ARCH_ROMSTAGE_X86_32
+ select ARCH_RAMSTAGE_X86_32
+ select SMP
+ select SSE2
+ select UDELAY_LAPIC
+ select CPU_MICROCODE_IN_CBFS
+ select TSC_SYNC_MFENCE
+ select HAVE_INTEL_ME
+ select X86_RAMTEST
+
+config SMM_TSEG_SIZE
+ hex
+ default 0x800000
+
+config ENABLE_VMX
+ bool "Enable VMX for virtualization"
+ default n
+ help
+ Virtual Machine Extensions are provided in many x86 CPUs. These
+ provide various facilities for allowing a host OS to provide an
+ environment where potentially several guest OSes have only
+ limited access to the underlying hardware. This is achieved
+ without resorting to software trapping and/or instruction set
+ emulation (which would be very slow).
+
+ Intel's implementation of this is called VT-x. This option enables
+ VT-x this so that the OS that is booted by U-Boot can make use of
+ these facilities. If this option is not enabled, then the host OS
+ will be unable to support virtualisation, or it will run very
+ slowly.
+
+endif
+
+config CPU_INTEL_SOCKET_RPGA989
+ bool
+
+if CPU_INTEL_SOCKET_RPGA989
+
+config SOCKET_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select MMX
+ select SSE
+ select CACHE_AS_RAM
+
+config CACHE_MRC_BIN
+ bool
+ default n
+
+endif
diff --git a/arch/x86/cpu/ivybridge/Makefile b/arch/x86/cpu/ivybridge/Makefile
new file mode 100644
index 0000000000..721b37e628
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/Makefile
@@ -0,0 +1,16 @@
+#
+# Copyright (c) 2014 Google, Inc
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += car.o
+obj-y += cpu.o
+obj-y += early_init.o
+obj-y += early_me.o
+obj-y += lpc.o
+obj-y += me_status.o
+obj-y += microcode_intel.o
+obj-y += pci.o
+obj-y += report_platform.o
+obj-y += sdram.o
diff --git a/arch/x86/cpu/ivybridge/car.S b/arch/x86/cpu/ivybridge/car.S
new file mode 100644
index 0000000000..dca68e4144
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/car.S
@@ -0,0 +1,178 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * From Coreboot file cpu/intel/model_206ax/cache_as_ram.inc
+ *
+ * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich@gmail.com>
+ * Copyright (C) 2005 Tyan (written by Yinghai Lu for Tyan)
+ * Copyright (C) 2007-2008 coresystems GmbH
+ * Copyright (C) 2012 Kyösti Mälkki <kyosti.malkki@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/mtrr.h>
+#include <asm/post.h>
+#include <asm/processor-flags.h>
+
+#define MTRR_PHYS_BASE_MSR(reg) (0x200 + 2 * (reg))
+#define MTRR_PHYS_MASK_MSR(reg) (0x200 + 2 * (reg) + 1)
+
+#define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE
+#define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE
+
+/* Cache 4GB - MRC_SIZE_KB for MRC */
+#define CACHE_MRC_BYTES ((CONFIG_CACHE_MRC_SIZE_KB << 10) - 1)
+#define CACHE_MRC_BASE (0xFFFFFFFF - CACHE_MRC_BYTES)
+#define CACHE_MRC_MASK (~CACHE_MRC_BYTES)
+
+#define CPU_PHYSMASK_HI (1 << (CONFIG_CPU_ADDR_BITS - 32) - 1)
+
+#define NOEVICTMOD_MSR 0x2e0
+
+ /*
+ * Note: ebp must not be touched in this code as it holds the BIST
+ * value (built-in self test). We preserve this value until it can
+ * be written to global_data when CAR is ready for use.
+ */
+.globl car_init
+car_init:
+ post_code(POST_CAR_START)
+
+ /* Send INIT IPI to all excluding ourself */
+ movl $0x000C4500, %eax
+ movl $0xFEE00300, %esi
+ movl %eax, (%esi)
+
+ post_code(POST_CAR_SIPI)
+ /* Zero out all fixed range and variable range MTRRs */
+ movl $mtrr_table, %esi
+ movl $((mtrr_table_end - mtrr_table) / 2), %edi
+ xorl %eax, %eax
+ xorl %edx, %edx
+clear_mtrrs:
+ movw (%esi), %bx
+ movzx %bx, %ecx
+ wrmsr
+ add $2, %esi
+ dec %edi
+ jnz clear_mtrrs
+
+ post_code(POST_CAR_MTRR)
+ /* Configure the default memory type to uncacheable */
+ movl $MTRRdefType_MSR, %ecx
+ rdmsr
+ andl $(~0x00000cff), %eax
+ wrmsr
+
+ post_code(POST_CAR_UNCACHEABLE)
+ /* Set Cache-as-RAM base address */
+ movl $(MTRR_PHYS_BASE_MSR(0)), %ecx
+ movl $(CACHE_AS_RAM_BASE | MTRR_TYPE_WRBACK), %eax
+ xorl %edx, %edx
+ wrmsr
+
+ post_code(POST_CAR_BASE_ADDRESS)
+ /* Set Cache-as-RAM mask */
+ movl $(MTRR_PHYS_MASK_MSR(0)), %ecx
+ movl $(~(CACHE_AS_RAM_SIZE - 1) | MTRRphysMaskValid), %eax
+ movl $CPU_PHYSMASK_HI, %edx
+ wrmsr
+
+ post_code(POST_CAR_MASK)
+
+ /* Enable MTRR */
+ movl $MTRRdefType_MSR, %ecx
+ rdmsr
+ orl $MTRRdefTypeEn, %eax
+ wrmsr
+
+ /* Enable cache (CR0.CD = 0, CR0.NW = 0) */
+ movl %cr0, %eax
+ andl $(~(X86_CR0_CD | X86_CR0_NW)), %eax
+ invd
+ movl %eax, %cr0
+
+ /* enable the 'no eviction' mode */
+ movl $NOEVICTMOD_MSR, %ecx
+ rdmsr
+ orl $1, %eax
+ andl $~2, %eax
+ wrmsr
+
+ /* Clear the cache memory region. This will also fill up the cache */
+ movl $CACHE_AS_RAM_BASE, %esi
+ movl %esi, %edi
+ movl $(CACHE_AS_RAM_SIZE / 4), %ecx
+ xorl %eax, %eax
+ rep stosl
+
+ /* enable the 'no eviction run' state */
+ movl $NOEVICTMOD_MSR, %ecx
+ rdmsr
+ orl $3, %eax
+ wrmsr
+
+ post_code(POST_CAR_FILL)
+ /* Enable Cache-as-RAM mode by disabling cache */
+ movl %cr0, %eax
+ orl $X86_CR0_CD, %eax
+ movl %eax, %cr0
+
+ /* Enable cache for our code in Flash because we do XIP here */
+ movl $MTRR_PHYS_BASE_MSR(1), %ecx
+ xorl %edx, %edx
+ movl $car_init_ret, %eax
+ andl $(~(CONFIG_XIP_ROM_SIZE - 1)), %eax
+ orl $MTRR_TYPE_WRPROT, %eax
+ wrmsr
+
+ movl $MTRR_PHYS_MASK_MSR(1), %ecx
+ movl $CPU_PHYSMASK_HI, %edx
+ movl $(~(CONFIG_XIP_ROM_SIZE - 1) | MTRRphysMaskValid), %eax
+ wrmsr
+
+ post_code(POST_CAR_ROM_CACHE)
+#ifdef CONFIG_CACHE_MRC_BIN
+ /* Enable caching for ram init code to run faster */
+ movl $MTRR_PHYS_BASE_MSR(2), %ecx
+ movl $(CACHE_MRC_BASE | MTRR_TYPE_WRPROT), %eax
+ xorl %edx, %edx
+ wrmsr
+ movl $MTRR_PHYS_MASK_MSR(2), %ecx
+ movl $(CACHE_MRC_MASK | MTRRphysMaskValid), %eax
+ movl $CPU_PHYSMASK_HI, %edx
+ wrmsr
+#endif
+
+ post_code(POST_CAR_MRC_CACHE)
+ /* Enable cache */
+ movl %cr0, %eax
+ andl $(~(X86_CR0_CD | X86_CR0_NW)), %eax
+ movl %eax, %cr0
+
+ post_code(POST_CAR_CPU_CACHE)
+
+ /* All CPUs need to be in Wait for SIPI state */
+wait_for_sipi:
+ movl (%esi), %eax
+ bt $12, %eax
+ jc wait_for_sipi
+
+ /* return */
+ jmp car_init_ret
+
+mtrr_table:
+ /* Fixed MTRRs */
+ .word 0x250, 0x258, 0x259
+ .word 0x268, 0x269, 0x26A
+ .word 0x26B, 0x26C, 0x26D
+ .word 0x26E, 0x26F
+ /* Variable MTRRs */
+ .word 0x200, 0x201, 0x202, 0x203
+ .word 0x204, 0x205, 0x206, 0x207
+ .word 0x208, 0x209, 0x20A, 0x20B
+ .word 0x20C, 0x20D, 0x20E, 0x20F
+ .word 0x210, 0x211, 0x212, 0x213
+mtrr_table_end:
diff --git a/arch/x86/cpu/ivybridge/cpu.c b/arch/x86/cpu/ivybridge/cpu.c
new file mode 100644
index 0000000000..60976db44d
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/cpu.c
@@ -0,0 +1,357 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ * (C) Copyright 2008
+ * Graeme Russ, graeme.russ@gmail.com.
+ *
+ * Some portions from coreboot src/mainboard/google/link/romstage.c
+ * and src/cpu/intel/model_206ax/bootblock.c
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2011 Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <asm/cpu.h>
+#include <asm/io.h>
+#include <asm/lapic.h>
+#include <asm/msr.h>
+#include <asm/mtrr.h>
+#include <asm/pci.h>
+#include <asm/post.h>
+#include <asm/processor.h>
+#include <asm/arch/model_206ax.h>
+#include <asm/arch/microcode.h>
+#include <asm/arch/pch.h>
+#include <asm/arch/sandybridge.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void enable_port80_on_lpc(struct pci_controller *hose, pci_dev_t dev)
+{
+ /* Enable port 80 POST on LPC */
+ pci_hose_write_config_dword(hose, dev, PCH_RCBA_BASE, DEFAULT_RCBA | 1);
+ clrbits_le32(RCB_REG(GCS), 4);
+}
+
+/*
+ * Enable Prefetching and Caching.
+ */
+static void enable_spi_prefetch(struct pci_controller *hose, pci_dev_t dev)
+{
+ u8 reg8;
+
+ pci_hose_read_config_byte(hose, dev, 0xdc, &reg8);
+ reg8 &= ~(3 << 2);
+ reg8 |= (2 << 2); /* Prefetching and Caching Enabled */
+ pci_hose_write_config_byte(hose, dev, 0xdc, reg8);
+}
+
+static void set_var_mtrr(
+ unsigned reg, unsigned base, unsigned size, unsigned type)
+
+{
+ /* Bit Bit 32-35 of MTRRphysMask should be set to 1 */
+ /* FIXME: It only support 4G less range */
+ wrmsr(MTRRphysBase_MSR(reg), base | type, 0);
+ wrmsr(MTRRphysMask_MSR(reg), ~(size - 1) | MTRRphysMaskValid,
+ (1 << (CONFIG_CPU_ADDR_BITS - 32)) - 1);
+}
+
+static void enable_rom_caching(void)
+{
+ disable_caches();
+ set_var_mtrr(1, 0xffc00000, 4 << 20, MTRR_TYPE_WRPROT);
+ enable_caches();
+
+ /* Enable Variable MTRRs */
+ wrmsr(MTRRdefType_MSR, 0x800, 0);
+}
+
+static int set_flex_ratio_to_tdp_nominal(void)
+{
+ msr_t flex_ratio, msr;
+ u8 nominal_ratio;
+
+ /* Minimum CPU revision for configurable TDP support */
+ if (cpuid_eax(1) < IVB_CONFIG_TDP_MIN_CPUID)
+ return -EINVAL;
+
+ /* Check for Flex Ratio support */
+ flex_ratio = msr_read(MSR_FLEX_RATIO);
+ if (!(flex_ratio.lo & FLEX_RATIO_EN))
+ return -EINVAL;
+
+ /* Check for >0 configurable TDPs */
+ msr = msr_read(MSR_PLATFORM_INFO);
+ if (((msr.hi >> 1) & 3) == 0)
+ return -EINVAL;
+
+ /* Use nominal TDP ratio for flex ratio */
+ msr = msr_read(MSR_CONFIG_TDP_NOMINAL);
+ nominal_ratio = msr.lo & 0xff;
+
+ /* See if flex ratio is already set to nominal TDP ratio */
+ if (((flex_ratio.lo >> 8) & 0xff) == nominal_ratio)
+ return 0;
+
+ /* Set flex ratio to nominal TDP ratio */
+ flex_ratio.lo &= ~0xff00;
+ flex_ratio.lo |= nominal_ratio << 8;
+ flex_ratio.lo |= FLEX_RATIO_LOCK;
+ msr_write(MSR_FLEX_RATIO, flex_ratio);
+
+ /* Set flex ratio in soft reset data register bits 11:6 */
+ clrsetbits_le32(RCB_REG(SOFT_RESET_DATA), 0x3f << 6,
+ (nominal_ratio & 0x3f) << 6);
+
+ /* Set soft reset control to use register value */
+ setbits_le32(RCB_REG(SOFT_RESET_CTRL), 1);
+
+ /* Issue warm reset, will be "CPU only" due to soft reset data */
+ outb(0x0, PORT_RESET);
+ outb(0x6, PORT_RESET);
+ cpu_hlt();
+
+ /* Not reached */
+ return -EINVAL;
+}
+
+static void set_spi_speed(void)
+{
+ u32 fdod;
+
+ /* Observe SPI Descriptor Component Section 0 */
+ writel(0x1000, RCB_REG(SPI_DESC_COMP0));
+
+ /* Extract the1 Write/Erase SPI Frequency from descriptor */
+ fdod = readl(RCB_REG(SPI_FREQ_WR_ERA));
+ fdod >>= 24;
+ fdod &= 7;
+
+ /* Set Software Sequence frequency to match */
+ clrsetbits_8(RCB_REG(SPI_FREQ_SWSEQ), 7, fdod);
+}
+
+int arch_cpu_init(void)
+{
+ const void *blob = gd->fdt_blob;
+ struct pci_controller *hose;
+ int node;
+ int ret;
+
+ post_code(POST_CPU_INIT);
+ timer_set_base(rdtsc());
+
+ ret = x86_cpu_init_f();
+ if (ret)
+ return ret;
+
+ ret = pci_early_init_hose(&hose);
+ if (ret)
+ return ret;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_LPC);
+ if (node < 0)
+ return -ENOENT;
+ ret = lpc_early_init(gd->fdt_blob, node, PCH_LPC_DEV);
+ if (ret)
+ return ret;
+
+ enable_spi_prefetch(hose, PCH_LPC_DEV);
+
+ /* This is already done in start.S, but let's do it in C */
+ enable_port80_on_lpc(hose, PCH_LPC_DEV);
+
+ /* already done in car.S */
+ if (false)
+ enable_rom_caching();
+
+ set_spi_speed();
+
+ /*
+ * We should do as little as possible before the serial console is
+ * up. Perhaps this should move to later. Our next lot of init
+ * happens in print_cpuinfo() when we have a console
+ */
+ ret = set_flex_ratio_to_tdp_nominal();
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int enable_smbus(void)
+{
+ pci_dev_t dev;
+ uint16_t value;
+
+ /* Set the SMBus device statically. */
+ dev = PCI_BDF(0x0, 0x1f, 0x3);
+
+ /* Check to make sure we've got the right device. */
+ value = pci_read_config16(dev, 0x0);
+ if (value != 0x8086) {
+ printf("SMBus controller not found\n");
+ return -ENOSYS;
+ }
+
+ /* Set SMBus I/O base. */
+ pci_write_config32(dev, SMB_BASE,
+ SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO);
+
+ /* Set SMBus enable. */
+ pci_write_config8(dev, HOSTC, HST_EN);
+
+ /* Set SMBus I/O space enable. */
+ pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
+
+ /* Disable interrupt generation. */
+ outb(0, SMBUS_IO_BASE + SMBHSTCTL);
+
+ /* Clear any lingering errors, so transactions can run. */
+ outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
+ debug("SMBus controller enabled\n");
+
+ return 0;
+}
+
+#define PCH_EHCI0_TEMP_BAR0 0xe8000000
+#define PCH_EHCI1_TEMP_BAR0 0xe8000400
+#define PCH_XHCI_TEMP_BAR0 0xe8001000
+
+/*
+ * Setup USB controller MMIO BAR to prevent the reference code from
+ * resetting the controller.
+ *
+ * The BAR will be re-assigned during device enumeration so these are only
+ * temporary.
+ *
+ * This is used to speed up the resume path.
+ */
+static void enable_usb_bar(void)
+{
+ pci_dev_t usb0 = PCH_EHCI1_DEV;
+ pci_dev_t usb1 = PCH_EHCI2_DEV;
+ pci_dev_t usb3 = PCH_XHCI_DEV;
+ u32 cmd;
+
+ /* USB Controller 1 */
+ pci_write_config32(usb0, PCI_BASE_ADDRESS_0,
+ PCH_EHCI0_TEMP_BAR0);
+ cmd = pci_read_config32(usb0, PCI_COMMAND);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config32(usb0, PCI_COMMAND, cmd);
+
+ /* USB Controller 1 */
+ pci_write_config32(usb1, PCI_BASE_ADDRESS_0,
+ PCH_EHCI1_TEMP_BAR0);
+ cmd = pci_read_config32(usb1, PCI_COMMAND);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config32(usb1, PCI_COMMAND, cmd);
+
+ /* USB3 Controller */
+ pci_write_config32(usb3, PCI_BASE_ADDRESS_0,
+ PCH_XHCI_TEMP_BAR0);
+ cmd = pci_read_config32(usb3, PCI_COMMAND);
+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ pci_write_config32(usb3, PCI_COMMAND, cmd);
+}
+
+static int report_bist_failure(void)
+{
+ if (gd->arch.bist != 0) {
+ printf("BIST failed: %08x\n", gd->arch.bist);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+int print_cpuinfo(void)
+{
+ enum pei_boot_mode_t boot_mode = PEI_BOOT_NONE;
+ char processor_name[CPU_MAX_NAME_LEN];
+ const char *name;
+ uint32_t pm1_cnt;
+ uint16_t pm1_sts;
+ int ret;
+
+ /* Halt if there was a built in self test failure */
+ ret = report_bist_failure();
+ if (ret)
+ return ret;
+
+ enable_lapic();
+
+ ret = microcode_update_intel();
+ if (ret && ret != -ENOENT && ret != -EEXIST)
+ return ret;
+
+ /* Enable upper 128bytes of CMOS */
+ writel(1 << 2, RCB_REG(RC));
+
+ /* TODO: cmos_post_init() */
+ if (readl(MCHBAR_REG(SSKPD)) == 0xCAFE) {
+ debug("soft reset detected\n");
+ boot_mode = PEI_BOOT_SOFT_RESET;
+
+ /* System is not happy after keyboard reset... */
+ debug("Issuing CF9 warm reset\n");
+ outb(0x6, 0xcf9);
+ cpu_hlt();
+ }
+
+ /* Early chipset init required before RAM init can work */
+ sandybridge_early_init(SANDYBRIDGE_MOBILE);
+
+ /* Check PM1_STS[15] to see if we are waking from Sx */
+ pm1_sts = inw(DEFAULT_PMBASE + PM1_STS);
+
+ /* Read PM1_CNT[12:10] to determine which Sx state */
+ pm1_cnt = inl(DEFAULT_PMBASE + PM1_CNT);
+
+ if ((pm1_sts & WAK_STS) && ((pm1_cnt >> 10) & 7) == 5) {
+#if CONFIG_HAVE_ACPI_RESUME
+ debug("Resume from S3 detected.\n");
+ boot_mode = PEI_BOOT_RESUME;
+ /* Clear SLP_TYPE. This will break stage2 but
+ * we care for that when we get there.
+ */
+ outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + PM1_CNT);
+#else
+ debug("Resume from S3 detected, but disabled.\n");
+#endif
+ } else {
+ /*
+ * TODO: An indication of life might be possible here (e.g.
+ * keyboard light)
+ */
+ }
+ post_code(POST_EARLY_INIT);
+
+ /* Enable SPD ROMs and DDR-III DRAM */
+ ret = enable_smbus();
+ if (ret)
+ return ret;
+
+ /* Prepare USB controller early in S3 resume */
+ if (boot_mode == PEI_BOOT_RESUME)
+ enable_usb_bar();
+
+ gd->arch.pei_boot_mode = boot_mode;
+
+ /* TODO: Move this to the board or driver */
+ pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1);
+ pci_write_config32(PCH_LPC_DEV, GPIO_CNTL, 0x10);
+
+ /* Print processor name */
+ name = cpu_get_name(processor_name);
+ printf("CPU: %s\n", name);
+
+ post_code(POST_CPU_INFO);
+
+ return 0;
+}
diff --git a/arch/x86/cpu/ivybridge/early_init.c b/arch/x86/cpu/ivybridge/early_init.c
new file mode 100644
index 0000000000..eb8f6139fe
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/early_init.c
@@ -0,0 +1,145 @@
+/*
+ * From Coreboot
+ *
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2011 Google Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/pci.h>
+#include <asm/arch/pch.h>
+#include <asm/arch/sandybridge.h>
+
+static void sandybridge_setup_bars(pci_dev_t pch_dev, pci_dev_t lpc_dev)
+{
+ /* Setting up Southbridge. In the northbridge code. */
+ debug("Setting up static southbridge registers\n");
+ pci_write_config32(lpc_dev, PCH_RCBA_BASE, DEFAULT_RCBA | 1);
+
+ pci_write_config32(lpc_dev, PMBASE, DEFAULT_PMBASE | 1);
+ pci_write_config8(lpc_dev, ACPI_CNTL, 0x80); /* Enable ACPI BAR */
+
+ debug("Disabling watchdog reboot\n");
+ setbits_le32(RCB_REG(GCS), 1 >> 5); /* No reset */
+ outw(1 << 11, DEFAULT_PMBASE | 0x60 | 0x08); /* halt timer */
+
+ /* Set up all hardcoded northbridge BARs */
+ debug("Setting up static registers\n");
+ pci_write_config32(pch_dev, EPBAR, DEFAULT_EPBAR | 1);
+ pci_write_config32(pch_dev, EPBAR + 4, (0LL + DEFAULT_EPBAR) >> 32);
+ pci_write_config32(pch_dev, MCHBAR, DEFAULT_MCHBAR | 1);
+ pci_write_config32(pch_dev, MCHBAR + 4, (0LL + DEFAULT_MCHBAR) >> 32);
+ /* 64MB - busses 0-63 */
+ pci_write_config32(pch_dev, PCIEXBAR, DEFAULT_PCIEXBAR | 5);
+ pci_write_config32(pch_dev, PCIEXBAR + 4,
+ (0LL + DEFAULT_PCIEXBAR) >> 32);
+ pci_write_config32(pch_dev, DMIBAR, DEFAULT_DMIBAR | 1);
+ pci_write_config32(pch_dev, DMIBAR + 4, (0LL + DEFAULT_DMIBAR) >> 32);
+
+ /* Set C0000-FFFFF to access RAM on both reads and writes */
+ pci_write_config8(pch_dev, PAM0, 0x30);
+ pci_write_config8(pch_dev, PAM1, 0x33);
+ pci_write_config8(pch_dev, PAM2, 0x33);
+ pci_write_config8(pch_dev, PAM3, 0x33);
+ pci_write_config8(pch_dev, PAM4, 0x33);
+ pci_write_config8(pch_dev, PAM5, 0x33);
+ pci_write_config8(pch_dev, PAM6, 0x33);
+}
+
+static void sandybridge_setup_graphics(pci_dev_t pch_dev, pci_dev_t video_dev)
+{
+ u32 reg32;
+ u16 reg16;
+ u8 reg8;
+
+ reg16 = pci_read_config16(video_dev, PCI_DEVICE_ID);
+ switch (reg16) {
+ case 0x0102: /* GT1 Desktop */
+ case 0x0106: /* GT1 Mobile */
+ case 0x010a: /* GT1 Server */
+ case 0x0112: /* GT2 Desktop */
+ case 0x0116: /* GT2 Mobile */
+ case 0x0122: /* GT2 Desktop >=1.3GHz */
+ case 0x0126: /* GT2 Mobile >=1.3GHz */
+ case 0x0156: /* IvyBridge */
+ case 0x0166: /* IvyBridge */
+ break;
+ default:
+ debug("Graphics not supported by this CPU/chipset\n");
+ return;
+ }
+
+ debug("Initialising Graphics\n");
+
+ /* Setup IGD memory by setting GGC[7:3] = 1 for 32MB */
+ reg16 = pci_read_config16(pch_dev, GGC);
+ reg16 &= ~0x00f8;
+ reg16 |= 1 << 3;
+ /* Program GTT memory by setting GGC[9:8] = 2MB */
+ reg16 &= ~0x0300;
+ reg16 |= 2 << 8;
+ /* Enable VGA decode */
+ reg16 &= ~0x0002;
+ pci_write_config16(pch_dev, GGC, reg16);
+
+ /* Enable 256MB aperture */
+ reg8 = pci_read_config8(video_dev, MSAC);
+ reg8 &= ~0x06;
+ reg8 |= 0x02;
+ pci_write_config8(video_dev, MSAC, reg8);
+
+ /* Erratum workarounds */
+ reg32 = readl(MCHBAR_REG(0x5f00));
+ reg32 |= (1 << 9) | (1 << 10);
+ writel(reg32, MCHBAR_REG(0x5f00));
+
+ /* Enable SA Clock Gating */
+ reg32 = readl(MCHBAR_REG(0x5f00));
+ writel(reg32 | 1, MCHBAR_REG(0x5f00));
+
+ /* GPU RC6 workaround for sighting 366252 */
+ reg32 = readl(MCHBAR_REG(0x5d14));
+ reg32 |= (1 << 31);
+ writel(reg32, MCHBAR_REG(0x5d14));
+
+ /* VLW */
+ reg32 = readl(MCHBAR_REG(0x6120));
+ reg32 &= ~(1 << 0);
+ writel(reg32, MCHBAR_REG(0x6120));
+
+ reg32 = readl(MCHBAR_REG(0x5418));
+ reg32 |= (1 << 4) | (1 << 5);
+ writel(reg32, MCHBAR_REG(0x5418));
+}
+
+void sandybridge_early_init(int chipset_type)
+{
+ pci_dev_t pch_dev = PCH_DEV;
+ pci_dev_t video_dev = PCH_VIDEO_DEV;
+ pci_dev_t lpc_dev = PCH_LPC_DEV;
+ u32 capid0_a;
+ u8 reg8;
+
+ /* Device ID Override Enable should be done very early */
+ capid0_a = pci_read_config32(pch_dev, 0xe4);
+ if (capid0_a & (1 << 10)) {
+ reg8 = pci_read_config8(pch_dev, 0xf3);
+ reg8 &= ~7; /* Clear 2:0 */
+
+ if (chipset_type == SANDYBRIDGE_MOBILE)
+ reg8 |= 1; /* Set bit 0 */
+
+ pci_write_config8(pch_dev, 0xf3, reg8);
+ }
+
+ /* Setup all BARs required for early PCIe and raminit */
+ sandybridge_setup_bars(pch_dev, lpc_dev);
+
+ /* Device Enable */
+ pci_write_config32(pch_dev, DEVEN, DEVEN_HOST | DEVEN_IGD);
+
+ sandybridge_setup_graphics(pch_dev, video_dev);
+}
diff --git a/arch/x86/cpu/ivybridge/early_me.c b/arch/x86/cpu/ivybridge/early_me.c
new file mode 100644
index 0000000000..b24dea10b1
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/early_me.c
@@ -0,0 +1,191 @@
+/*
+ * From Coreboot src/southbridge/intel/bd82x6x/early_me.c
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/pci.h>
+#include <asm/processor.h>
+#include <asm/arch/me.h>
+#include <asm/arch/pch.h>
+#include <asm/io.h>
+
+static const char *const me_ack_values[] = {
+ [ME_HFS_ACK_NO_DID] = "No DID Ack received",
+ [ME_HFS_ACK_RESET] = "Non-power cycle reset",
+ [ME_HFS_ACK_PWR_CYCLE] = "Power cycle reset",
+ [ME_HFS_ACK_S3] = "Go to S3",
+ [ME_HFS_ACK_S4] = "Go to S4",
+ [ME_HFS_ACK_S5] = "Go to S5",
+ [ME_HFS_ACK_GBL_RESET] = "Global Reset",
+ [ME_HFS_ACK_CONTINUE] = "Continue to boot"
+};
+
+static inline void pci_read_dword_ptr(void *ptr, int offset)
+{
+ u32 dword;
+
+ dword = pci_read_config32(PCH_ME_DEV, offset);
+ memcpy(ptr, &dword, sizeof(dword));
+}
+
+static inline void pci_write_dword_ptr(void *ptr, int offset)
+{
+ u32 dword = 0;
+ memcpy(&dword, ptr, sizeof(dword));
+ pci_write_config32(PCH_ME_DEV, offset, dword);
+}
+
+void intel_early_me_status(void)
+{
+ struct me_hfs hfs;
+ struct me_gmes gmes;
+
+ pci_read_dword_ptr(&hfs, PCI_ME_HFS);
+ pci_read_dword_ptr(&gmes, PCI_ME_GMES);
+
+ intel_me_status(&hfs, &gmes);
+}
+
+int intel_early_me_init(void)
+{
+ int count;
+ struct me_uma uma;
+ struct me_hfs hfs;
+
+ debug("Intel ME early init\n");
+
+ /* Wait for ME UMA SIZE VALID bit to be set */
+ for (count = ME_RETRY; count > 0; --count) {
+ pci_read_dword_ptr(&uma, PCI_ME_UMA);
+ if (uma.valid)
+ break;
+ udelay(ME_DELAY);
+ }
+ if (!count) {
+ printf("ERROR: ME is not ready!\n");
+ return -EBUSY;
+ }
+
+ /* Check for valid firmware */
+ pci_read_dword_ptr(&hfs, PCI_ME_HFS);
+ if (hfs.fpt_bad) {
+ printf("WARNING: ME has bad firmware\n");
+ return -EBADF;
+ }
+
+ debug("Intel ME firmware is ready\n");
+
+ return 0;
+}
+
+int intel_early_me_uma_size(void)
+{
+ struct me_uma uma;
+
+ pci_read_dword_ptr(&uma, PCI_ME_UMA);
+ if (uma.valid) {
+ debug("ME: Requested %uMB UMA\n", uma.size);
+ return uma.size;
+ }
+
+ debug("ME: Invalid UMA size\n");
+ return -EINVAL;
+}
+
+static inline void set_global_reset(int enable)
+{
+ u32 etr3;
+
+ etr3 = pci_read_config32(PCH_LPC_DEV, ETR3);
+
+ /* Clear CF9 Without Resume Well Reset Enable */
+ etr3 &= ~ETR3_CWORWRE;
+
+ /* CF9GR indicates a Global Reset */
+ if (enable)
+ etr3 |= ETR3_CF9GR;
+ else
+ etr3 &= ~ETR3_CF9GR;
+
+ pci_write_config32(PCH_LPC_DEV, ETR3, etr3);
+}
+
+int intel_early_me_init_done(u8 status)
+{
+ u8 reset;
+ int count;
+ u32 mebase_l, mebase_h;
+ struct me_hfs hfs;
+ struct me_did did = {
+ .init_done = ME_INIT_DONE,
+ .status = status
+ };
+
+ /* MEBASE from MESEG_BASE[35:20] */
+ mebase_l = pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_L);
+ mebase_h = pci_read_config32(PCH_DEV, PCI_CPU_MEBASE_H);
+ mebase_h &= 0xf;
+ did.uma_base = (mebase_l >> 20) | (mebase_h << 12);
+
+ /* Send message to ME */
+ debug("ME: Sending Init Done with status: %d, UMA base: 0x%04x\n",
+ status, did.uma_base);
+
+ pci_write_dword_ptr(&did, PCI_ME_H_GS);
+
+ /* Must wait for ME acknowledgement */
+ for (count = ME_RETRY; count > 0; --count) {
+ pci_read_dword_ptr(&hfs, PCI_ME_HFS);
+ if (hfs.bios_msg_ack)
+ break;
+ udelay(ME_DELAY);
+ }
+ if (!count) {
+ printf("ERROR: ME failed to respond\n");
+ return -1;
+ }
+
+ /* Return the requested BIOS action */
+ debug("ME: Requested BIOS Action: %s\n", me_ack_values[hfs.ack_data]);
+
+ /* Check status after acknowledgement */
+ intel_early_me_status();
+
+ reset = 0;
+ switch (hfs.ack_data) {
+ case ME_HFS_ACK_CONTINUE:
+ /* Continue to boot */
+ return 0;
+ case ME_HFS_ACK_RESET:
+ /* Non-power cycle reset */
+ set_global_reset(0);
+ reset = 0x06;
+ break;
+ case ME_HFS_ACK_PWR_CYCLE:
+ /* Power cycle reset */
+ set_global_reset(0);
+ reset = 0x0e;
+ break;
+ case ME_HFS_ACK_GBL_RESET:
+ /* Global reset */
+ set_global_reset(1);
+ reset = 0x0e;
+ break;
+ case ME_HFS_ACK_S3:
+ case ME_HFS_ACK_S4:
+ case ME_HFS_ACK_S5:
+ break;
+ }
+
+ /* Perform the requested reset */
+ if (reset) {
+ outb(reset, 0xcf9);
+ cpu_hlt();
+ }
+ return -1;
+}
diff --git a/arch/x86/cpu/ivybridge/lpc.c b/arch/x86/cpu/ivybridge/lpc.c
new file mode 100644
index 0000000000..621ef2cee6
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/lpc.c
@@ -0,0 +1,48 @@
+/*
+ * From coreboot southbridge/intel/bd82x6x/lpc.c
+ *
+ * Copyright (C) 2008-2009 coresystems GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <pci.h>
+#include <asm/pci.h>
+#include <asm/arch/pch.h>
+
+int lpc_early_init(const void *blob, int node, pci_dev_t dev)
+{
+ struct reg_info {
+ u32 base;
+ u32 size;
+ } values[4], *ptr;
+ int count;
+ int i;
+
+ count = fdtdec_get_int_array_count(blob, node, "gen-dec",
+ (u32 *)values, sizeof(values) / sizeof(u32));
+ if (count < 0)
+ return -EINVAL;
+
+ /* Set COM1/COM2 decode range */
+ pci_write_config16(dev, LPC_IO_DEC, 0x0010);
+
+ /* Enable PS/2 Keyboard/Mouse, EC areas and COM1 */
+ pci_write_config16(dev, LPC_EN, KBC_LPC_EN | MC_LPC_EN |
+ GAMEL_LPC_EN | COMA_LPC_EN);
+
+ /* Write all registers but use 0 if we run out of data */
+ count = count * sizeof(u32) / sizeof(values[0]);
+ for (i = 0, ptr = values; i < ARRAY_SIZE(values); i++, ptr++) {
+ u32 reg = 0;
+
+ if (i < count)
+ reg = ptr->base | PCI_COMMAND_IO | (ptr->size << 16);
+ pci_write_config32(dev, LPC_GENX_DEC(i), reg);
+ }
+
+ return 0;
+}
diff --git a/arch/x86/cpu/ivybridge/me_status.c b/arch/x86/cpu/ivybridge/me_status.c
new file mode 100644
index 0000000000..15cf69f40e
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/me_status.c
@@ -0,0 +1,195 @@
+/*
+ * From Coreboot src/southbridge/intel/bd82x6x/me_status.c
+ *
+ * Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/arch/me.h>
+
+/* HFS1[3:0] Current Working State Values */
+static const char *const me_cws_values[] = {
+ [ME_HFS_CWS_RESET] = "Reset",
+ [ME_HFS_CWS_INIT] = "Initializing",
+ [ME_HFS_CWS_REC] = "Recovery",
+ [ME_HFS_CWS_NORMAL] = "Normal",
+ [ME_HFS_CWS_WAIT] = "Platform Disable Wait",
+ [ME_HFS_CWS_TRANS] = "OP State Transition",
+ [ME_HFS_CWS_INVALID] = "Invalid CPU Plugged In"
+};
+
+/* HFS1[8:6] Current Operation State Values */
+static const char *const me_opstate_values[] = {
+ [ME_HFS_STATE_PREBOOT] = "Preboot",
+ [ME_HFS_STATE_M0_UMA] = "M0 with UMA",
+ [ME_HFS_STATE_M3] = "M3 without UMA",
+ [ME_HFS_STATE_M0] = "M0 without UMA",
+ [ME_HFS_STATE_BRINGUP] = "Bring up",
+ [ME_HFS_STATE_ERROR] = "M0 without UMA but with error"
+};
+
+/* HFS[19:16] Current Operation Mode Values */
+static const char *const me_opmode_values[] = {
+ [ME_HFS_MODE_NORMAL] = "Normal",
+ [ME_HFS_MODE_DEBUG] = "Debug",
+ [ME_HFS_MODE_DIS] = "Soft Temporary Disable",
+ [ME_HFS_MODE_OVER_JMPR] = "Security Override via Jumper",
+ [ME_HFS_MODE_OVER_MEI] = "Security Override via MEI Message"
+};
+
+/* HFS[15:12] Error Code Values */
+static const char *const me_error_values[] = {
+ [ME_HFS_ERROR_NONE] = "No Error",
+ [ME_HFS_ERROR_UNCAT] = "Uncategorized Failure",
+ [ME_HFS_ERROR_IMAGE] = "Image Failure",
+ [ME_HFS_ERROR_DEBUG] = "Debug Failure"
+};
+
+/* GMES[31:28] ME Progress Code */
+static const char *const me_progress_values[] = {
+ [ME_GMES_PHASE_ROM] = "ROM Phase",
+ [ME_GMES_PHASE_BUP] = "BUP Phase",
+ [ME_GMES_PHASE_UKERNEL] = "uKernel Phase",
+ [ME_GMES_PHASE_POLICY] = "Policy Module",
+ [ME_GMES_PHASE_MODULE] = "Module Loading",
+ [ME_GMES_PHASE_UNKNOWN] = "Unknown",
+ [ME_GMES_PHASE_HOST] = "Host Communication"
+};
+
+/* GMES[27:24] Power Management Event */
+static const char *const me_pmevent_values[] = {
+ [0x00] = "Clean Moff->Mx wake",
+ [0x01] = "Moff->Mx wake after an error",
+ [0x02] = "Clean global reset",
+ [0x03] = "Global reset after an error",
+ [0x04] = "Clean Intel ME reset",
+ [0x05] = "Intel ME reset due to exception",
+ [0x06] = "Pseudo-global reset",
+ [0x07] = "S0/M0->Sx/M3",
+ [0x08] = "Sx/M3->S0/M0",
+ [0x09] = "Non-power cycle reset",
+ [0x0a] = "Power cycle reset through M3",
+ [0x0b] = "Power cycle reset through Moff",
+ [0x0c] = "Sx/Mx->Sx/Moff"
+};
+
+/* Progress Code 0 states */
+static const char *const me_progress_rom_values[] = {
+ [0x00] = "BEGIN",
+ [0x06] = "DISABLE"
+};
+
+/* Progress Code 1 states */
+static const char *const me_progress_bup_values[] = {
+ [0x00] = "Initialization starts",
+ [0x01] = "Disable the host wake event",
+ [0x04] = "Flow determination start process",
+ [0x08] = "Error reading/matching the VSCC table in the descriptor",
+ [0x0a] = "Check to see if straps say ME DISABLED",
+ [0x0b] = "Timeout waiting for PWROK",
+ [0x0d] = "Possibly handle BUP manufacturing override strap",
+ [0x11] = "Bringup in M3",
+ [0x12] = "Bringup in M0",
+ [0x13] = "Flow detection error",
+ [0x15] = "M3 clock switching error",
+ [0x18] = "M3 kernel load",
+ [0x1c] = "T34 missing - cannot program ICC",
+ [0x1f] = "Waiting for DID BIOS message",
+ [0x20] = "Waiting for DID BIOS message failure",
+ [0x21] = "DID reported an error",
+ [0x22] = "Enabling UMA",
+ [0x23] = "Enabling UMA error",
+ [0x24] = "Sending DID Ack to BIOS",
+ [0x25] = "Sending DID Ack to BIOS error",
+ [0x26] = "Switching clocks in M0",
+ [0x27] = "Switching clocks in M0 error",
+ [0x28] = "ME in temp disable",
+ [0x32] = "M0 kernel load",
+};
+
+/* Progress Code 3 states */
+static const char *const me_progress_policy_values[] = {
+ [0x00] = "Entery into Policy Module",
+ [0x03] = "Received S3 entry",
+ [0x04] = "Received S4 entry",
+ [0x05] = "Received S5 entry",
+ [0x06] = "Received UPD entry",
+ [0x07] = "Received PCR entry",
+ [0x08] = "Received NPCR entry",
+ [0x09] = "Received host wake",
+ [0x0a] = "Received AC<>DC switch",
+ [0x0b] = "Received DRAM Init Done",
+ [0x0c] = "VSCC Data not found for flash device",
+ [0x0d] = "VSCC Table is not valid",
+ [0x0e] = "Flash Partition Boundary is outside address space",
+ [0x0f] = "ME cannot access the chipset descriptor region",
+ [0x10] = "Required VSCC values for flash parts do not match",
+};
+
+void intel_me_status(struct me_hfs *hfs, struct me_gmes *gmes)
+{
+ /* Check Current States */
+ debug("ME: FW Partition Table : %s\n",
+ hfs->fpt_bad ? "BAD" : "OK");
+ debug("ME: Bringup Loader Failure : %s\n",
+ hfs->ft_bup_ld_flr ? "YES" : "NO");
+ debug("ME: Firmware Init Complete : %s\n",
+ hfs->fw_init_complete ? "YES" : "NO");
+ debug("ME: Manufacturing Mode : %s\n",
+ hfs->mfg_mode ? "YES" : "NO");
+ debug("ME: Boot Options Present : %s\n",
+ hfs->boot_options_present ? "YES" : "NO");
+ debug("ME: Update In Progress : %s\n",
+ hfs->update_in_progress ? "YES" : "NO");
+ debug("ME: Current Working State : %s\n",
+ me_cws_values[hfs->working_state]);
+ debug("ME: Current Operation State : %s\n",
+ me_opstate_values[hfs->operation_state]);
+ debug("ME: Current Operation Mode : %s\n",
+ me_opmode_values[hfs->operation_mode]);
+ debug("ME: Error Code : %s\n",
+ me_error_values[hfs->error_code]);
+ debug("ME: Progress Phase : %s\n",
+ me_progress_values[gmes->progress_code]);
+ debug("ME: Power Management Event : %s\n",
+ me_pmevent_values[gmes->current_pmevent]);
+
+ debug("ME: Progress Phase State : ");
+ switch (gmes->progress_code) {
+ case ME_GMES_PHASE_ROM: /* ROM Phase */
+ debug("%s", me_progress_rom_values[gmes->current_state]);
+ break;
+
+ case ME_GMES_PHASE_BUP: /* Bringup Phase */
+ if (gmes->current_state < ARRAY_SIZE(me_progress_bup_values) &&
+ me_progress_bup_values[gmes->current_state])
+ debug("%s",
+ me_progress_bup_values[gmes->current_state]);
+ else
+ debug("0x%02x", gmes->current_state);
+ break;
+
+ case ME_GMES_PHASE_POLICY: /* Policy Module Phase */
+ if (gmes->current_state <
+ ARRAY_SIZE(me_progress_policy_values) &&
+ me_progress_policy_values[gmes->current_state])
+ debug("%s",
+ me_progress_policy_values[gmes->current_state]);
+ else
+ debug("0x%02x", gmes->current_state);
+ break;
+
+ case ME_GMES_PHASE_HOST: /* Host Communication Phase */
+ if (!gmes->current_state)
+ debug("Host communication established");
+ else
+ debug("0x%02x", gmes->current_state);
+ break;
+
+ default:
+ debug("Unknown 0x%02x", gmes->current_state);
+ }
+ debug("\n");
+}
diff --git a/arch/x86/cpu/ivybridge/microcode_intel.c b/arch/x86/cpu/ivybridge/microcode_intel.c
new file mode 100644
index 0000000000..8c11a6351f
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/microcode_intel.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ * Copyright (C) 2000 Ronald G. Minnich
+ *
+ * Microcode update for Intel PIII and later CPUs
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <asm/cpu.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+
+/**
+ * struct microcode_update - standard microcode header from Intel
+ *
+ * We read this information out of the device tree and use it to determine
+ * whether the update is applicable or not. We also use the same structure
+ * to read information from the CPU.
+ */
+struct microcode_update {
+ uint header_version;
+ uint update_revision;
+ uint date_code;
+ uint processor_signature;
+ uint checksum;
+ uint loader_revision;
+ uint processor_flags;
+ const void *data;
+ int size;
+};
+
+static int microcode_decode_node(const void *blob, int node,
+ struct microcode_update *update)
+{
+ update->data = fdt_getprop(blob, node, "data", &update->size);
+ if (!update->data)
+ return -EINVAL;
+
+ update->header_version = fdtdec_get_int(blob, node,
+ "intel,header-version", 0);
+ update->update_revision = fdtdec_get_int(blob, node,
+ "intel,update-revision", 0);
+ update->date_code = fdtdec_get_int(blob, node,
+ "intel,date-code", 0);
+ update->processor_signature = fdtdec_get_int(blob, node,
+ "intel.processor-signature", 0);
+ update->checksum = fdtdec_get_int(blob, node, "intel,checksum", 0);
+ update->loader_revision = fdtdec_get_int(blob, node,
+ "loader-revision", 0);
+ update->processor_flags = fdtdec_get_int(blob, node,
+ "processor-flags", 0);
+
+ return 0;
+}
+
+static uint32_t microcode_read_rev(void)
+{
+ /*
+ * Some Intel CPUs can be very finicky about the CPUID sequence used.
+ * So this is implemented in assembly so that it works reliably.
+ */
+ uint32_t low, high;
+
+ asm volatile (
+ "xorl %%eax, %%eax\n"
+ "xorl %%edx, %%edx\n"
+ "movl $0x8b, %%ecx\n"
+ "wrmsr\n"
+ "movl $0x01, %%eax\n"
+ "cpuid\n"
+ "movl $0x8b, %%ecx\n"
+ "rdmsr\n"
+ : /* outputs */
+ "=a" (low), "=d" (high)
+ : /* inputs */
+ : /* clobbers */
+ "ebx", "ecx"
+ );
+
+ return high;
+}
+
+static void microcode_read_cpu(struct microcode_update *cpu)
+{
+ /* CPUID sets MSR 0x8B iff a microcode update has been loaded. */
+ unsigned int x86_model, x86_family;
+ struct cpuid_result result;
+ uint32_t low, high;
+
+ wrmsr(0x8b, 0, 0);
+ result = cpuid(1);
+ rdmsr(0x8b, low, cpu->update_revision);
+ x86_model = (result.eax >> 4) & 0x0f;
+ x86_family = (result.eax >> 8) & 0x0f;
+ cpu->processor_signature = result.eax;
+
+ cpu->processor_flags = 0;
+ if ((x86_model >= 5) || (x86_family > 6)) {
+ rdmsr(0x17, low, high);
+ cpu->processor_flags = 1 << ((high >> 18) & 7);
+ }
+ debug("microcode: sig=%#x pf=%#x revision=%#x\n",
+ cpu->processor_signature, cpu->processor_flags,
+ cpu->update_revision);
+}
+
+/* Get a microcode update from the device tree and apply it */
+int microcode_update_intel(void)
+{
+ struct microcode_update cpu, update;
+ const void *blob = gd->fdt_blob;
+ int count;
+ int node;
+ int ret;
+
+ microcode_read_cpu(&cpu);
+ node = 0;
+ count = 0;
+ do {
+ node = fdtdec_next_compatible(blob, node,
+ COMPAT_INTEL_MICROCODE);
+ if (node < 0) {
+ debug("%s: Found %d updates\n", __func__, count);
+ return count ? 0 : -ENOENT;
+ }
+
+ ret = microcode_decode_node(blob, node, &update);
+ if (ret) {
+ debug("%s: Unable to decode update: %d\n", __func__,
+ ret);
+ return ret;
+ }
+ if (update.processor_signature == cpu.processor_signature &&
+ (update.processor_flags & cpu.processor_flags)) {
+ debug("%s: Update already exists\n", __func__);
+ return -EEXIST;
+ }
+
+ wrmsr(0x79, (ulong)update.data, 0);
+ debug("microcode: updated to revision 0x%x date=%04x-%02x-%02x\n",
+ microcode_read_rev(), update.date_code & 0xffff,
+ (update.date_code >> 24) & 0xff,
+ (update.date_code >> 16) & 0xff);
+ count++;
+ } while (1);
+}
diff --git a/arch/x86/cpu/ivybridge/pci.c b/arch/x86/cpu/ivybridge/pci.c
new file mode 100644
index 0000000000..c1ae658d3f
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/pci.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2008,2009
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/pci.h>
+
+static void config_pci_bridge(struct pci_controller *hose, pci_dev_t dev,
+ struct pci_config_table *table)
+{
+ u8 secondary;
+
+ hose->read_byte(hose, dev, PCI_SECONDARY_BUS, &secondary);
+ if (secondary != 0)
+ pci_hose_scan_bus(hose, secondary);
+}
+
+static struct pci_config_table pci_ivybridge_config_table[] = {
+ /* vendor, device, class, bus, dev, func */
+ { PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_BRIDGE_PCI,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, &config_pci_bridge },
+ {}
+};
+
+void board_pci_setup_hose(struct pci_controller *hose)
+{
+ hose->config_table = pci_ivybridge_config_table;
+ hose->first_busno = 0;
+ hose->last_busno = 0;
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 0,
+ CONFIG_PCI_MEM_BUS,
+ CONFIG_PCI_MEM_PHYS,
+ CONFIG_PCI_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose->regions + 1,
+ CONFIG_PCI_IO_BUS,
+ CONFIG_PCI_IO_PHYS,
+ CONFIG_PCI_IO_SIZE,
+ PCI_REGION_IO);
+
+ pci_set_region(hose->regions + 2,
+ CONFIG_PCI_PREF_BUS,
+ CONFIG_PCI_PREF_PHYS,
+ CONFIG_PCI_PREF_SIZE,
+ PCI_REGION_PREFETCH);
+
+ hose->region_count = 3;
+}
diff --git a/arch/x86/cpu/ivybridge/report_platform.c b/arch/x86/cpu/ivybridge/report_platform.c
new file mode 100644
index 0000000000..69e31b3ca2
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/report_platform.c
@@ -0,0 +1,89 @@
+/*
+ * From Coreboot src/northbridge/intel/sandybridge/report_platform.c
+ *
+ * Copyright (C) 2012 Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/cpu.h>
+#include <asm/pci.h>
+#include <asm/arch/pch.h>
+
+static void report_cpu_info(void)
+{
+ char cpu_string[CPU_MAX_NAME_LEN], *cpu_name;
+ const char *mode[] = {"NOT ", ""};
+ struct cpuid_result cpuidr;
+ int vt, txt, aes;
+ u32 index;
+
+ index = 0x80000000;
+ cpuidr = cpuid(index);
+ if (cpuidr.eax < 0x80000004) {
+ strcpy(cpu_string, "Platform info not available");
+ cpu_name = cpu_string;
+ } else {
+ cpu_name = cpu_get_name(cpu_string);
+ }
+
+ cpuidr = cpuid(1);
+ debug("CPU id(%x): %s\n", cpuidr.eax, cpu_name);
+ aes = (cpuidr.ecx & (1 << 25)) ? 1 : 0;
+ txt = (cpuidr.ecx & (1 << 6)) ? 1 : 0;
+ vt = (cpuidr.ecx & (1 << 5)) ? 1 : 0;
+ debug("AES %ssupported, TXT %ssupported, VT %ssupported\n",
+ mode[aes], mode[txt], mode[vt]);
+}
+
+/* The PCI id name match comes from Intel document 472178 */
+static struct {
+ u16 dev_id;
+ const char *dev_name;
+} pch_table[] = {
+ {0x1E41, "Desktop Sample"},
+ {0x1E42, "Mobile Sample"},
+ {0x1E43, "SFF Sample"},
+ {0x1E44, "Z77"},
+ {0x1E45, "H71"},
+ {0x1E46, "Z75"},
+ {0x1E47, "Q77"},
+ {0x1E48, "Q75"},
+ {0x1E49, "B75"},
+ {0x1E4A, "H77"},
+ {0x1E53, "C216"},
+ {0x1E55, "QM77"},
+ {0x1E56, "QS77"},
+ {0x1E58, "UM77"},
+ {0x1E57, "HM77"},
+ {0x1E59, "HM76"},
+ {0x1E5D, "HM75"},
+ {0x1E5E, "HM70"},
+ {0x1E5F, "NM70"},
+};
+
+static void report_pch_info(void)
+{
+ const char *pch_type = "Unknown";
+ int i;
+ u16 dev_id;
+ uint8_t rev_id;
+
+ dev_id = pci_read_config16(PCH_LPC_DEV, 2);
+ for (i = 0; i < ARRAY_SIZE(pch_table); i++) {
+ if (pch_table[i].dev_id == dev_id) {
+ pch_type = pch_table[i].dev_name;
+ break;
+ }
+ }
+ rev_id = pci_read_config8(PCH_LPC_DEV, 8);
+ debug("PCH type: %s, device id: %x, rev id %x\n", pch_type, dev_id,
+ rev_id);
+}
+
+void report_platform_info(void)
+{
+ report_cpu_info();
+ report_pch_info();
+}
diff --git a/arch/x86/cpu/ivybridge/sdram.c b/arch/x86/cpu/ivybridge/sdram.c
new file mode 100644
index 0000000000..df2b9901fc
--- /dev/null
+++ b/arch/x86/cpu/ivybridge/sdram.c
@@ -0,0 +1,571 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010,2011
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * Portions from Coreboot mainboard/google/link/romstage.c
+ * Copyright (C) 2007-2010 coresystems GmbH
+ * Copyright (C) 2011 Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/gpio.h>
+#include <asm/global_data.h>
+#include <asm/pci.h>
+#include <asm/arch/me.h>
+#include <asm/arch/pei_data.h>
+#include <asm/arch/pch.h>
+#include <asm/post.h>
+#include <asm/arch/sandybridge.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * This function looks for the highest region of memory lower than 4GB which
+ * has enough space for U-Boot where U-Boot is aligned on a page boundary.
+ * It overrides the default implementation found elsewhere which simply
+ * picks the end of ram, wherever that may be. The location of the stack,
+ * the relocation address, and how far U-Boot is moved by relocation are
+ * set in the global data structure.
+ */
+ulong board_get_usable_ram_top(ulong total_size)
+{
+ struct memory_info *info = &gd->arch.meminfo;
+ uintptr_t dest_addr = 0;
+ struct memory_area *largest = NULL;
+ int i;
+
+ /* Find largest area of memory below 4GB */
+
+ for (i = 0; i < info->num_areas; i++) {
+ struct memory_area *area = &info->area[i];
+
+ if (area->start >= 1ULL << 32)
+ continue;
+ if (!largest || area->size > largest->size)
+ largest = area;
+ }
+
+ /* If no suitable area was found, return an error. */
+ assert(largest);
+ if (!largest || largest->size < (2 << 20))
+ panic("No available memory found for relocation");
+
+ dest_addr = largest->start + largest->size;
+
+ return (ulong)dest_addr;
+}
+
+void dram_init_banksize(void)
+{
+ struct memory_info *info = &gd->arch.meminfo;
+ int num_banks;
+ int i;
+
+ for (i = 0, num_banks = 0; i < info->num_areas; i++) {
+ struct memory_area *area = &info->area[i];
+
+ if (area->start >= 1ULL << 32)
+ continue;
+ gd->bd->bi_dram[num_banks].start = area->start;
+ gd->bd->bi_dram[num_banks].size = area->size;
+ num_banks++;
+ }
+}
+
+static const char *const ecc_decoder[] = {
+ "inactive",
+ "active on IO",
+ "disabled on IO",
+ "active"
+};
+
+/*
+ * Dump in the log memory controller configuration as read from the memory
+ * controller registers.
+ */
+static void report_memory_config(void)
+{
+ u32 addr_decoder_common, addr_decode_ch[2];
+ int i;
+
+ addr_decoder_common = readl(MCHBAR_REG(0x5000));
+ addr_decode_ch[0] = readl(MCHBAR_REG(0x5004));
+ addr_decode_ch[1] = readl(MCHBAR_REG(0x5008));
+
+ debug("memcfg DDR3 clock %d MHz\n",
+ (readl(MCHBAR_REG(0x5e04)) * 13333 * 2 + 50) / 100);
+ debug("memcfg channel assignment: A: %d, B % d, C % d\n",
+ addr_decoder_common & 3,
+ (addr_decoder_common >> 2) & 3,
+ (addr_decoder_common >> 4) & 3);
+
+ for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) {
+ u32 ch_conf = addr_decode_ch[i];
+ debug("memcfg channel[%d] config (%8.8x):\n", i, ch_conf);
+ debug(" ECC %s\n", ecc_decoder[(ch_conf >> 24) & 3]);
+ debug(" enhanced interleave mode %s\n",
+ ((ch_conf >> 22) & 1) ? "on" : "off");
+ debug(" rank interleave %s\n",
+ ((ch_conf >> 21) & 1) ? "on" : "off");
+ debug(" DIMMA %d MB width x%d %s rank%s\n",
+ ((ch_conf >> 0) & 0xff) * 256,
+ ((ch_conf >> 19) & 1) ? 16 : 8,
+ ((ch_conf >> 17) & 1) ? "dual" : "single",
+ ((ch_conf >> 16) & 1) ? "" : ", selected");
+ debug(" DIMMB %d MB width x%d %s rank%s\n",
+ ((ch_conf >> 8) & 0xff) * 256,
+ ((ch_conf >> 20) & 1) ? 16 : 8,
+ ((ch_conf >> 18) & 1) ? "dual" : "single",
+ ((ch_conf >> 16) & 1) ? ", selected" : "");
+ }
+}
+
+static void post_system_agent_init(struct pei_data *pei_data)
+{
+ /* If PCIe init is skipped, set the PEG clock gating */
+ if (!pei_data->pcie_init)
+ setbits_le32(MCHBAR_REG(0x7010), 1);
+}
+
+static asmlinkage void console_tx_byte(unsigned char byte)
+{
+#ifdef DEBUG
+ putc(byte);
+#endif
+}
+
+/**
+ * Find the PEI executable in the ROM and execute it.
+ *
+ * @param pei_data: configuration data for UEFI PEI reference code
+ */
+int sdram_initialise(struct pei_data *pei_data)
+{
+ unsigned version;
+ const char *data;
+ uint16_t done;
+ int ret;
+
+ report_platform_info();
+
+ /* Wait for ME to be ready */
+ ret = intel_early_me_init();
+ if (ret)
+ return ret;
+ ret = intel_early_me_uma_size();
+ if (ret < 0)
+ return ret;
+
+ debug("Starting UEFI PEI System Agent\n");
+
+ /* If MRC data is not found we cannot continue S3 resume. */
+ if (pei_data->boot_mode == PEI_BOOT_RESUME && !pei_data->mrc_input) {
+ debug("Giving up in sdram_initialize: No MRC data\n");
+ outb(0x6, PORT_RESET);
+ cpu_hlt();
+ }
+
+ /* Pass console handler in pei_data */
+ pei_data->tx_byte = console_tx_byte;
+
+ debug("PEI data at %p, size %x:\n", pei_data, sizeof(*pei_data));
+
+ data = (char *)CONFIG_X86_MRC_START;
+ if (data) {
+ int rv;
+ int (*func)(struct pei_data *);
+
+ debug("Calling MRC at %p\n", data);
+ post_code(POST_PRE_MRC);
+ func = (int (*)(struct pei_data *))data;
+ rv = func(pei_data);
+ post_code(POST_MRC);
+ if (rv) {
+ switch (rv) {
+ case -1:
+ printf("PEI version mismatch.\n");
+ break;
+ case -2:
+ printf("Invalid memory frequency.\n");
+ break;
+ default:
+ printf("MRC returned %x.\n", rv);
+ }
+ printf("Nonzero MRC return value.\n");
+ return -EFAULT;
+ }
+ } else {
+ printf("UEFI PEI System Agent not found.\n");
+ return -ENOSYS;
+ }
+
+#if CONFIG_USBDEBUG
+ /* mrc.bin reconfigures USB, so reinit it to have debug */
+ early_usbdebug_init();
+#endif
+
+ version = readl(MCHBAR_REG(0x5034));
+ debug("System Agent Version %d.%d.%d Build %d\n",
+ version >> 24 , (version >> 16) & 0xff,
+ (version >> 8) & 0xff, version & 0xff);
+
+ /*
+ * Send ME init done for SandyBridge here. This is done inside the
+ * SystemAgent binary on IvyBridge
+ */
+ done = pci_read_config32(PCH_DEV, PCI_DEVICE_ID);
+ done &= BASE_REV_MASK;
+ if (BASE_REV_SNB == done)
+ intel_early_me_init_done(ME_INIT_STATUS_SUCCESS);
+ else
+ intel_early_me_status();
+
+ post_system_agent_init(pei_data);
+ report_memory_config();
+
+ return 0;
+}
+
+static int copy_spd(struct pei_data *peid)
+{
+ const int gpio_vector[] = {41, 42, 43, 10, -1};
+ int spd_index;
+ const void *blob = gd->fdt_blob;
+ int node, spd_node;
+ int ret, i;
+
+ for (i = 0; ; i++) {
+ if (gpio_vector[i] == -1)
+ break;
+ ret = gpio_requestf(gpio_vector[i], "spd_id%d", i);
+ if (ret) {
+ debug("%s: Could not request gpio %d\n", __func__,
+ gpio_vector[i]);
+ return ret;
+ }
+ }
+ spd_index = gpio_get_values_as_int(gpio_vector);
+ debug("spd index %d\n", spd_index);
+ node = fdtdec_next_compatible(blob, 0, COMPAT_MEMORY_SPD);
+ if (node < 0) {
+ printf("SPD data not found.\n");
+ return -ENOENT;
+ }
+
+ for (spd_node = fdt_first_subnode(blob, node);
+ spd_node > 0;
+ spd_node = fdt_next_subnode(blob, spd_node)) {
+ const char *data;
+ int len;
+
+ if (fdtdec_get_int(blob, spd_node, "reg", -1) != spd_index)
+ continue;
+ data = fdt_getprop(blob, spd_node, "data", &len);
+ if (len < sizeof(peid->spd_data[0])) {
+ printf("Missing SPD data\n");
+ return -EINVAL;
+ }
+
+ debug("Using SDRAM SPD data for '%s'\n",
+ fdt_get_name(blob, spd_node, NULL));
+ memcpy(peid->spd_data[0], data, sizeof(peid->spd_data[0]));
+ break;
+ }
+
+ if (spd_node < 0) {
+ printf("No SPD data found for index %d\n", spd_index);
+ return -ENOENT;
+ }
+
+ return 0;
+}
+
+/**
+ * add_memory_area() - Add a new usable memory area to our list
+ *
+ * Note: @start and @end must not span the first 4GB boundary
+ *
+ * @info: Place to store memory info
+ * @start: Start of this memory area
+ * @end: End of this memory area + 1
+ */
+static int add_memory_area(struct memory_info *info,
+ uint64_t start, uint64_t end)
+{
+ struct memory_area *ptr;
+
+ if (info->num_areas == CONFIG_NR_DRAM_BANKS)
+ return -ENOSPC;
+
+ ptr = &info->area[info->num_areas];
+ ptr->start = start;
+ ptr->size = end - start;
+ info->total_memory += ptr->size;
+ if (ptr->start < (1ULL << 32))
+ info->total_32bit_memory += ptr->size;
+ debug("%d: memory %llx size %llx, total now %llx / %llx\n",
+ info->num_areas, ptr->start, ptr->size,
+ info->total_32bit_memory, info->total_memory);
+ info->num_areas++;
+
+ return 0;
+}
+
+/**
+ * sdram_find() - Find available memory
+ *
+ * This is a bit complicated since on x86 there are system memory holes all
+ * over the place. We create a list of available memory blocks
+ */
+static int sdram_find(pci_dev_t dev)
+{
+ struct memory_info *info = &gd->arch.meminfo;
+ uint32_t tseg_base, uma_size, tolud;
+ uint64_t tom, me_base, touud;
+ uint64_t uma_memory_base = 0;
+ uint64_t uma_memory_size;
+ unsigned long long tomk;
+ uint16_t ggc;
+
+ /* Total Memory 2GB example:
+ *
+ * 00000000 0000MB-1992MB 1992MB RAM (writeback)
+ * 7c800000 1992MB-2000MB 8MB TSEG (SMRR)
+ * 7d000000 2000MB-2002MB 2MB GFX GTT (uncached)
+ * 7d200000 2002MB-2034MB 32MB GFX UMA (uncached)
+ * 7f200000 2034MB TOLUD
+ * 7f800000 2040MB MEBASE
+ * 7f800000 2040MB-2048MB 8MB ME UMA (uncached)
+ * 80000000 2048MB TOM
+ * 100000000 4096MB-4102MB 6MB RAM (writeback)
+ *
+ * Total Memory 4GB example:
+ *
+ * 00000000 0000MB-2768MB 2768MB RAM (writeback)
+ * ad000000 2768MB-2776MB 8MB TSEG (SMRR)
+ * ad800000 2776MB-2778MB 2MB GFX GTT (uncached)
+ * ada00000 2778MB-2810MB 32MB GFX UMA (uncached)
+ * afa00000 2810MB TOLUD
+ * ff800000 4088MB MEBASE
+ * ff800000 4088MB-4096MB 8MB ME UMA (uncached)
+ * 100000000 4096MB TOM
+ * 100000000 4096MB-5374MB 1278MB RAM (writeback)
+ * 14fe00000 5368MB TOUUD
+ */
+
+ /* Top of Upper Usable DRAM, including remap */
+ touud = pci_read_config32(dev, TOUUD+4);
+ touud <<= 32;
+ touud |= pci_read_config32(dev, TOUUD);
+
+ /* Top of Lower Usable DRAM */
+ tolud = pci_read_config32(dev, TOLUD);
+
+ /* Top of Memory - does not account for any UMA */
+ tom = pci_read_config32(dev, 0xa4);
+ tom <<= 32;
+ tom |= pci_read_config32(dev, 0xa0);
+
+ debug("TOUUD %llx TOLUD %08x TOM %llx\n", touud, tolud, tom);
+
+ /* ME UMA needs excluding if total memory <4GB */
+ me_base = pci_read_config32(dev, 0x74);
+ me_base <<= 32;
+ me_base |= pci_read_config32(dev, 0x70);
+
+ debug("MEBASE %llx\n", me_base);
+
+ /* TODO: Get rid of all this shifting by 10 bits */
+ tomk = tolud >> 10;
+ if (me_base == tolud) {
+ /* ME is from MEBASE-TOM */
+ uma_size = (tom - me_base) >> 10;
+ /* Increment TOLUD to account for ME as RAM */
+ tolud += uma_size << 10;
+ /* UMA starts at old TOLUD */
+ uma_memory_base = tomk * 1024ULL;
+ uma_memory_size = uma_size * 1024ULL;
+ debug("ME UMA base %llx size %uM\n", me_base, uma_size >> 10);
+ }
+
+ /* Graphics memory comes next */
+ ggc = pci_read_config16(dev, GGC);
+ if (!(ggc & 2)) {
+ debug("IGD decoded, subtracting ");
+
+ /* Graphics memory */
+ uma_size = ((ggc >> 3) & 0x1f) * 32 * 1024ULL;
+ debug("%uM UMA", uma_size >> 10);
+ tomk -= uma_size;
+ uma_memory_base = tomk * 1024ULL;
+ uma_memory_size += uma_size * 1024ULL;
+
+ /* GTT Graphics Stolen Memory Size (GGMS) */
+ uma_size = ((ggc >> 8) & 0x3) * 1024ULL;
+ tomk -= uma_size;
+ uma_memory_base = tomk * 1024ULL;
+ uma_memory_size += uma_size * 1024ULL;
+ debug(" and %uM GTT\n", uma_size >> 10);
+ }
+
+ /* Calculate TSEG size from its base which must be below GTT */
+ tseg_base = pci_read_config32(dev, 0xb8);
+ uma_size = (uma_memory_base - tseg_base) >> 10;
+ tomk -= uma_size;
+ uma_memory_base = tomk * 1024ULL;
+ uma_memory_size += uma_size * 1024ULL;
+ debug("TSEG base 0x%08x size %uM\n", tseg_base, uma_size >> 10);
+
+ debug("Available memory below 4GB: %lluM\n", tomk >> 10);
+
+ /* Report the memory regions */
+ add_memory_area(info, 1 << 20, 2 << 28);
+ add_memory_area(info, (2 << 28) + (2 << 20), 4 << 28);
+ add_memory_area(info, (4 << 28) + (2 << 20), tseg_base);
+ add_memory_area(info, 1ULL << 32, touud);
+ /*
+ * If >= 4GB installed then memory from TOLUD to 4GB
+ * is remapped above TOM, TOUUD will account for both
+ */
+ if (touud > (1ULL << 32ULL)) {
+ debug("Available memory above 4GB: %lluM\n",
+ (touud >> 20) - 4096);
+ }
+
+ return 0;
+}
+
+static void rcba_config(void)
+{
+ /*
+ * GFX INTA -> PIRQA (MSI)
+ * D28IP_P3IP WLAN INTA -> PIRQB
+ * D29IP_E1P EHCI1 INTA -> PIRQD
+ * D26IP_E2P EHCI2 INTA -> PIRQF
+ * D31IP_SIP SATA INTA -> PIRQF (MSI)
+ * D31IP_SMIP SMBUS INTB -> PIRQH
+ * D31IP_TTIP THRT INTC -> PIRQA
+ * D27IP_ZIP HDA INTA -> PIRQA (MSI)
+ *
+ * TRACKPAD -> PIRQE (Edge Triggered)
+ * TOUCHSCREEN -> PIRQG (Edge Triggered)
+ */
+
+ /* Device interrupt pin register (board specific) */
+ writel((INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
+ (INTB << D31IP_SMIP) | (INTA << D31IP_SIP), RCB_REG(D31IP));
+ writel(NOINT << D30IP_PIP, RCB_REG(D30IP));
+ writel(INTA << D29IP_E1P, RCB_REG(D29IP));
+ writel(INTA << D28IP_P3IP, RCB_REG(D28IP));
+ writel(INTA << D27IP_ZIP, RCB_REG(D27IP));
+ writel(INTA << D26IP_E2P, RCB_REG(D26IP));
+ writel(NOINT << D25IP_LIP, RCB_REG(D25IP));
+ writel(NOINT << D22IP_MEI1IP, RCB_REG(D22IP));
+
+ /* Device interrupt route registers */
+ writel(DIR_ROUTE(PIRQB, PIRQH, PIRQA, PIRQC), RCB_REG(D31IR));
+ writel(DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG), RCB_REG(D29IR));
+ writel(DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE), RCB_REG(D28IR));
+ writel(DIR_ROUTE(PIRQA, PIRQH, PIRQA, PIRQB), RCB_REG(D27IR));
+ writel(DIR_ROUTE(PIRQF, PIRQE, PIRQG, PIRQH), RCB_REG(D26IR));
+ writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D25IR));
+ writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D22IR));
+
+ /* Enable IOAPIC (generic) */
+ writew(0x0100, RCB_REG(OIC));
+ /* PCH BWG says to read back the IOAPIC enable register */
+ (void)readw(RCB_REG(OIC));
+
+ /* Disable unused devices (board specific) */
+ setbits_le32(RCB_REG(FD), PCH_DISABLE_ALWAYS);
+}
+
+int dram_init(void)
+{
+ struct pei_data pei_data __aligned(8) = {
+ .pei_version = PEI_VERSION,
+ .mchbar = DEFAULT_MCHBAR,
+ .dmibar = DEFAULT_DMIBAR,
+ .epbar = DEFAULT_EPBAR,
+ .pciexbar = CONFIG_MMCONF_BASE_ADDRESS,
+ .smbusbar = SMBUS_IO_BASE,
+ .wdbbar = 0x4000000,
+ .wdbsize = 0x1000,
+ .hpet_address = CONFIG_HPET_ADDRESS,
+ .rcba = DEFAULT_RCBABASE,
+ .pmbase = DEFAULT_PMBASE,
+ .gpiobase = DEFAULT_GPIOBASE,
+ .thermalbase = 0xfed08000,
+ .system_type = 0, /* 0 Mobile, 1 Desktop/Server */
+ .tseg_size = CONFIG_SMM_TSEG_SIZE,
+ .ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
+ .ec_present = 1,
+ .ddr3lv_support = 1,
+ /*
+ * 0 = leave channel enabled
+ * 1 = disable dimm 0 on channel
+ * 2 = disable dimm 1 on channel
+ * 3 = disable dimm 0+1 on channel
+ */
+ .dimm_channel0_disabled = 2,
+ .dimm_channel1_disabled = 2,
+ .max_ddr3_freq = 1600,
+ .usb_port_config = {
+ /*
+ * Empty and onboard Ports 0-7, set to un-used pin
+ * OC3
+ */
+ { 0, 3, 0x0000 }, /* P0= Empty */
+ { 1, 0, 0x0040 }, /* P1= Left USB 1 (OC0) */
+ { 1, 1, 0x0040 }, /* P2= Left USB 2 (OC1) */
+ { 1, 3, 0x0040 }, /* P3= SDCARD (no OC) */
+ { 0, 3, 0x0000 }, /* P4= Empty */
+ { 1, 3, 0x0040 }, /* P5= WWAN (no OC) */
+ { 0, 3, 0x0000 }, /* P6= Empty */
+ { 0, 3, 0x0000 }, /* P7= Empty */
+ /*
+ * Empty and onboard Ports 8-13, set to un-used pin
+ * OC4
+ */
+ { 1, 4, 0x0040 }, /* P8= Camera (no OC) */
+ { 1, 4, 0x0040 }, /* P9= Bluetooth (no OC) */
+ { 0, 4, 0x0000 }, /* P10= Empty */
+ { 0, 4, 0x0000 }, /* P11= Empty */
+ { 0, 4, 0x0000 }, /* P12= Empty */
+ { 0, 4, 0x0000 }, /* P13= Empty */
+ },
+ };
+ pci_dev_t dev = PCI_BDF(0, 0, 0);
+ int ret;
+
+ debug("Boot mode %d\n", gd->arch.pei_boot_mode);
+ debug("mcr_input %p\n", pei_data.mrc_input);
+ pei_data.boot_mode = gd->arch.pei_boot_mode;
+ ret = copy_spd(&pei_data);
+ if (!ret)
+ ret = sdram_initialise(&pei_data);
+ if (ret)
+ return ret;
+
+ rcba_config();
+ quick_ram_check();
+
+ writew(0xCAFE, MCHBAR_REG(SSKPD));
+
+ post_code(POST_DRAM);
+
+ ret = sdram_find(dev);
+ if (ret)
+ return ret;
+
+ gd->ram_size = gd->arch.meminfo.total_32bit_memory;
+
+ return 0;
+}
diff --git a/arch/x86/cpu/pci.c b/arch/x86/cpu/pci.c
new file mode 100644
index 0000000000..e3993880db
--- /dev/null
+++ b/arch/x86/cpu/pci.c
@@ -0,0 +1,98 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2008,2009
+ * Graeme Russ, <graeme.russ@gmail.com>
+ *
+ * (C) Copyright 2002
+ * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <malloc.h>
+#include <pci.h>
+#include <asm/pci.h>
+
+static struct pci_controller x86_hose;
+
+int pci_early_init_hose(struct pci_controller **hosep)
+{
+ struct pci_controller *hose;
+
+ hose = calloc(1, sizeof(struct pci_controller));
+ if (!hose)
+ return -ENOMEM;
+
+ board_pci_setup_hose(hose);
+ pci_setup_type1(hose);
+ gd->arch.hose = hose;
+ *hosep = hose;
+
+ return 0;
+}
+
+void pci_init_board(void)
+{
+ struct pci_controller *hose = &x86_hose;
+
+ /* Stop using the early hose */
+ gd->arch.hose = NULL;
+
+ board_pci_setup_hose(hose);
+ pci_setup_type1(hose);
+ pci_register_hose(hose);
+
+ hose->last_busno = pci_hose_scan(hose);
+}
+
+static struct pci_controller *get_hose(void)
+{
+ if (gd->arch.hose)
+ return gd->arch.hose;
+
+ return pci_bus_to_hose(0);
+}
+
+unsigned int pci_read_config8(pci_dev_t dev, unsigned where)
+{
+ uint8_t value;
+
+ pci_hose_read_config_byte(get_hose(), dev, where, &value);
+
+ return value;
+}
+
+unsigned int pci_read_config16(pci_dev_t dev, unsigned where)
+{
+ uint16_t value;
+
+ pci_hose_read_config_word(get_hose(), dev, where, &value);
+
+ return value;
+}
+
+unsigned int pci_read_config32(pci_dev_t dev, unsigned where)
+{
+ uint32_t value;
+
+ pci_hose_read_config_dword(get_hose(), dev, where, &value);
+
+ return value;
+}
+
+void pci_write_config8(pci_dev_t dev, unsigned where, unsigned value)
+{
+ pci_hose_write_config_byte(get_hose(), dev, where, value);
+}
+
+void pci_write_config16(pci_dev_t dev, unsigned where, unsigned value)
+{
+ pci_hose_write_config_word(get_hose(), dev, where, value);
+}
+
+void pci_write_config32(pci_dev_t dev, unsigned where, unsigned value)
+{
+ pci_hose_write_config_dword(get_hose(), dev, where, value);
+}
diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S
index 338bab19e4..b0d0ac0610 100644
--- a/arch/x86/cpu/start.S
+++ b/arch/x86/cpu/start.S
@@ -13,6 +13,7 @@
#include <config.h>
#include <version.h>
#include <asm/global_data.h>
+#include <asm/post.h>
#include <asm/processor.h>
#include <asm/processor-flags.h>
#include <generated/generic-asm-offsets.h>
@@ -49,6 +50,8 @@ _start:
*/
movw $GD_FLG_COLD_BOOT, %bx
1:
+ /* Save BIST */
+ movl %eax, %ebp
/* Load the segement registes to match the gdt loaded in start16.S */
movl $(X86_GDT_ENTRY_32BIT_DS * X86_GDT_ENTRY_SIZE), %eax
@@ -65,6 +68,7 @@ _start:
jmp early_board_init
.globl early_board_init_ret
early_board_init_ret:
+ post_code(POST_START)
/* Initialise Cache-As-RAM */
jmp car_init
@@ -74,16 +78,29 @@ car_init_ret:
* We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM,
* or fully initialised SDRAM - we really don't care which)
* starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack
+ * and early malloc area. The MRC requires some space at the top.
+ *
+ * Stack grows down from top of CAR. We have:
+ *
+ * top-> CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE
+ * MRC area
+ * global_data
+ * x86 global descriptor table
+ * early malloc area
+ * stack
+ * bottom-> CONFIG_SYS_CAR_ADDR
*/
-
- /* Stack grows down from top of CAR */
- movl $(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE), %esp
+ movl $(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE - 4), %esp
+#ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE
+ subl $CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %esp
+#endif
/* Reserve space on stack for global data */
subl $GENERATED_GBL_DATA_SIZE, %esp
/* Align global data to 16-byte boundary */
andl $0xfffffff0, %esp
+ post_code(POST_START_STACK)
/* Zero the global data since it won't happen later */
xorl %eax, %eax
@@ -91,31 +108,36 @@ car_init_ret:
movl %esp, %edi
rep stosb
- /* Setup first parameter to setup_gdt */
+ /* Setup first parameter to setup_gdt, pointer to global_data */
movl %esp, %eax
/* Reserve space for global descriptor table */
subl $X86_GDT_SIZE, %esp
+ /* Align temporary global descriptor table to 16-byte boundary */
+ andl $0xfffffff0, %esp
+ movl %esp, %ecx
+
#if defined(CONFIG_SYS_MALLOC_F_LEN)
subl $CONFIG_SYS_MALLOC_F_LEN, %esp
movl %eax, %edx
addl $GD_MALLOC_BASE, %edx
movl %esp, (%edx)
#endif
-
- /* Align temporary global descriptor table to 16-byte boundary */
- andl $0xfffffff0, %esp
+ /* Store BIST */
+ movl %eax, %edx
+ addl $GD_BIST, %edx
+ movl %ebp, (%edx)
/* Set second parameter to setup_gdt */
- movl %esp, %edx
+ movl %ecx, %edx
/* Setup global descriptor table so gd->xyz works */
call setup_gdt
/* Set parameter to board_init_f() to boot flags */
+ post_code(POST_START_DONE)
xorl %eax, %eax
- movw %bx, %ax
/* Enter, U-boot! */
call board_init_f
diff --git a/arch/x86/cpu/start16.S b/arch/x86/cpu/start16.S
index 6968fda649..9550502e9a 100644
--- a/arch/x86/cpu/start16.S
+++ b/arch/x86/cpu/start16.S
@@ -21,18 +21,16 @@
.code16
.globl start16
start16:
+ /* Save BIST */
+ movl %eax, %ecx
+
/* Set the Cold Boot / Hard Reset flag */
movl $GD_FLG_COLD_BOOT, %ebx
- /*
- * First we let the BSP do some early initialization
- * this code have to map the flash to its final position
- */
- jmp board_init16
-.globl board_init16_ret
-board_init16_ret:
+ xorl %eax, %eax
+ movl %eax, %cr3 /* Invalidate TLB */
- /* Turn of cache (this might require a 486-class CPU) */
+ /* Turn off cache (this might require a 486-class CPU) */
movl %cr0, %eax
orl $(X86_CR0_NW | X86_CR0_CD), %eax
movl %eax, %cr0
@@ -50,9 +48,11 @@ o32 cs lgdt gdt_ptr
/* Flush the prefetch queue */
jmp ff
ff:
- /* Finally jump to the 32bit initialization code */
+
+ /* Finally restore BIST and jump to the 32bit initialization code */
movw $code32start, %ax
movw %ax, %bp
+ movl %ecx, %eax
o32 cs ljmp *(%bp)
/* 48-bit far pointer */
OpenPOWER on IntegriCloud