diff options
Diffstat (limited to 'arch/powerpc/include/asm')
| -rw-r--r-- | arch/powerpc/include/asm/config_mpc85xx.h | 30 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/fsl_ddr_dimm_params.h | 1 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/fsl_ddr_sdram.h | 25 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/fsl_law.h | 7 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/fsl_liodn.h | 7 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/fsl_pci.h | 35 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/fsl_serdes.h | 1 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/immap_85xx.h | 97 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/processor.h | 3 |
9 files changed, 153 insertions, 53 deletions
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 7ed93acdcf..e1fc0f72c0 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -303,6 +303,7 @@ #elif defined(CONFIG_PPC_P2041) /* also supports P2040 */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -336,6 +337,7 @@ #elif defined(CONFIG_PPC_P3041) #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -366,9 +368,11 @@ #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #define CONFIG_SYS_FSL_ERRATUM_A004849 +#define CONFIG_SYS_FSL_ERRATUM_A005812 #elif defined(CONFIG_PPC_P4080) /* also supports P4040 */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 8 #define CONFIG_SYS_FSL_NUM_CC_PLLS 4 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -410,10 +414,12 @@ #define CONFIG_SYS_FSL_ERRATUM_A004849 #define CONFIG_SYS_FSL_ERRATUM_A004580 #define CONFIG_SYS_P4080_ERRATUM_PCIE_A003 +#define CONFIG_SYS_FSL_ERRATUM_A005812 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */ #define CONFIG_SYS_PPC64 /* 64-bit core */ #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -444,6 +450,7 @@ #elif defined(CONFIG_PPC_P5040) #define CONFIG_SYS_PPC64 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 3 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -469,6 +476,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 +#define CONFIG_SYS_FSL_ERRATUM_A005812 #elif defined(CONFIG_BSC9131) #define CONFIG_MAX_CPUS 1 @@ -492,6 +500,10 @@ #define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_FSL_DSP_DDR_ADDR 0x40000000 +#define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 0xb0000000 +#define CONFIG_SYS_FSL_DSP_M3_RAM_ADDR 0xc0000000 +#define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 3 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_NAND_FSL_IFC @@ -523,6 +535,8 @@ #endif #define CONFIG_SYS_FSL_NUM_CC_PLLS 5 #define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SRDS_1 +#define CONFIG_SYS_FSL_SRDS_2 #define CONFIG_SYS_FSL_SRDS_3 #define CONFIG_SYS_FSL_SRDS_4 #define CONFIG_SYS_FSL_SEC_COMPAT 4 @@ -536,6 +550,7 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_SRIO_LIODN #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_A004468 @@ -552,6 +567,8 @@ #define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ #define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ #define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SRDS_1 +#define CONFIG_SYS_FSL_SRDS_2 #define CONFIG_SYS_FSL_SEC_COMPAT 4 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 @@ -576,6 +593,7 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_SRIO_LIODN #else #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 2 @@ -612,6 +630,18 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#elif defined(CONFIG_PPC_C29X) +#define CONFIG_MAX_CPUS 1 +#define CONFIG_FSL_SDHC_V2_3 +#define CONFIG_SYS_FSL_NUM_LAWS 12 +#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3 +#define CONFIG_TSECV2_1 +#define CONFIG_SYS_FSL_SEC_COMPAT 6 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 + #else #error Processor type not defined for this platform #endif diff --git a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h index ffe4db8b8a..bd312ad5c5 100644 --- a/arch/powerpc/include/asm/fsl_ddr_dimm_params.h +++ b/arch/powerpc/include/asm/fsl_ddr_dimm_params.h @@ -26,6 +26,7 @@ typedef struct dimm_params_s { unsigned int primary_sdram_width; unsigned int ec_sdram_width; unsigned int registered_dimm; + unsigned int device_width; /* x4, x8, x16 components */ /* SDRAM device parameters */ unsigned int n_row_addr; diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index 640d3297d6..f4eec82d5d 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -277,6 +277,7 @@ typedef struct memctl_options_s { unsigned int mirrored_dimm; unsigned int quad_rank_present; unsigned int ap_en; /* address parity enable for RDIMM */ + unsigned int x4_en; /* enable x4 devices */ /* Global Timing Parameters */ unsigned int cas_latency_override; @@ -330,9 +331,31 @@ extern phys_size_t fsl_ddr_sdram(void); extern phys_size_t fsl_ddr_sdram_size(void); extern int fsl_use_spd(void); extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, - unsigned int ctrl_num); + unsigned int ctrl_num, int step); u32 fsl_ddr_get_intl3r(void); +static void __board_assert_mem_reset(void) +{ +} + +static void __board_deassert_mem_reset(void) +{ +} + +void board_assert_mem_reset(void) + __attribute__((weak, alias("__board_assert_mem_reset"))); + +void board_deassert_mem_reset(void) + __attribute__((weak, alias("__board_deassert_mem_reset"))); + +static int __board_need_mem_reset(void) +{ + return 0; +} + +int board_need_mem_reset(void) + __attribute__((weak, alias("__board_need_mem_reset"))); + /* * The 85xx boards have a common prototype for fixed_sdram so put the * declaration here. diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h index bea1636768..37d3a22461 100644 --- a/arch/powerpc/include/asm/fsl_law.h +++ b/arch/powerpc/include/asm/fsl_law.h @@ -82,7 +82,7 @@ enum law_trgt_if { #ifndef CONFIG_MPC8641 LAW_TRGT_IF_PCIE_1 = 0x02, #endif -#if defined(CONFIG_BSC9131) +#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) LAW_TRGT_IF_OCN_DSP = 0x03, #else #if !defined(CONFIG_MPC8572) && !defined(CONFIG_P2020) @@ -92,9 +92,14 @@ enum law_trgt_if { LAW_TRGT_IF_LBC = 0x04, LAW_TRGT_IF_CCSR = 0x08, LAW_TRGT_IF_DSP_CCSR = 0x09, + LAW_TRGT_IF_PLATFORM_SRAM = 0x0a, LAW_TRGT_IF_DDR_INTRLV = 0x0b, LAW_TRGT_IF_RIO = 0x0c, +#if defined(CONFIG_BSC9132) + LAW_TRGT_IF_CLASS_DSP = 0x0d, +#else LAW_TRGT_IF_RIO_2 = 0x0d, +#endif LAW_TRGT_IF_DPAA_SWP_SRAM = 0x0e, LAW_TRGT_IF_DDR = 0x0f, LAW_TRGT_IF_DDR_2 = 0x16, /* 2nd controller */ diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index 3f543d9249..44bc88dcec 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -29,6 +29,13 @@ struct srio_liodn_id_table { + CONFIG_SYS_MPC85xx_GUTS_OFFSET + CONFIG_SYS_CCSRBAR, \ } +#define SET_SRIO_LIODN_BASE(port, id_a) \ + { .id = { id_a }, .num_ids = 1, .portid = port, \ + .reg_offset[0] = offsetof(struct ccsr_rio, liodn) \ + + (port - 1) * 0x200 \ + + CONFIG_SYS_FSL_SRIO_ADDR, \ + } + struct liodn_id_table { const char * compat; u32 id[2]; diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h index c740da37ce..749411c101 100644 --- a/arch/powerpc/include/asm/fsl_pci.h +++ b/arch/powerpc/include/asm/fsl_pci.h @@ -1,5 +1,5 @@ /* - * Copyright 2007,2009-2011 Freescale Semiconductor, Inc. + * Copyright 2007,2009-2012 Freescale Semiconductor, Inc. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -13,6 +13,34 @@ #define PEX_IP_BLK_REV_2_2 0x02080202 #define PEX_IP_BLK_REV_2_3 0x02080203 +#define PEX_IP_BLK_REV_3_0 0x02080300 + +/* Freescale-specific PCI config registers */ +#define FSL_PCI_PBFR 0x44 + +#ifdef CONFIG_SYS_FSL_PCI_VER_3_X +/* Currently only the PCIe capability is used, so hardcode the offset. + * if more capabilities need to be justified, the capability link method + * should be applied here + */ +#define FSL_PCIE_CAP_ID 0x70 +#define PCI_DCR 0x78 /* PCIe Device Control Register */ +#define PCI_DSR 0x7a /* PCIe Device Status Register */ +#define PCI_LSR 0x82 /* PCIe Link Status Register */ +#define PCI_LCR 0x80 /* PCIe Link Control Register */ +#else +#define FSL_PCIE_CAP_ID 0x4c +#define PCI_DCR 0x54 /* PCIe Device Control Register */ +#define PCI_DSR 0x56 /* PCIe Device Status Register */ +#define PCI_LSR 0x5e /* PCIe Link Status Register */ +#define PCI_LCR 0x5c /* PCIe Link Control Register */ +#endif + +#define FSL_PCIE_CFG_RDY 0x4b0 +#define FSL_PROG_IF_AGENT 0x1 + +#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */ +#define PCI_LTSSM_L0 0x16 /* L0 state */ int fsl_setup_hose(struct pci_controller *hose, unsigned long addr); int fsl_is_pci_agent(struct pci_controller *hose); @@ -149,7 +177,10 @@ typedef struct ccsr_pci { u32 perr_cap3; /* 0xe34 - PCIE Error Capture Register 3 */ char res23[200]; u32 pdb_stat; /* 0xf00 - PCIE Debug Status */ - char res24[252]; + char res24[16]; + u32 pex_csr0; /* 0xf14 - PEX Control/Status register 0*/ + u32 pex_csr1; /* 0xf18 - PEX Control/Status register 1*/ + char res25[228]; } ccsr_fsl_pci_t; #define PCIE_CONFIG_PC 0x00020000 #define PCIE_CONFIG_OB_CK 0x00002000 diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index 59189adb39..1106d28058 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -90,6 +90,7 @@ void fsl_serdes_init(void); #ifdef CONFIG_FSL_CORENET #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 int serdes_get_first_lane(u32 sd, enum srds_prtcl device); +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); #else int serdes_get_first_lane(enum srds_prtcl device); #endif diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 81b3322fe6..3a10d778f1 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1544,6 +1544,18 @@ struct rio_pw { }; #endif +#ifdef CONFIG_SYS_FSL_SRIO_LIODN +struct rio_liodn { + u32 plbr; + u8 res0[28]; + u32 plaor; + u8 res1[12]; + u32 pludr; + u32 plldr; + u8 res2[456]; +}; +#endif + /* RapidIO Registers */ struct ccsr_rio { struct rio_arch arch; @@ -1566,6 +1578,10 @@ struct ccsr_rio { u8 res7[100]; struct rio_pw pw; #endif +#ifdef CONFIG_SYS_FSL_SRIO_LIODN + u8 res5[8192]; + struct rio_liodn liodn[CONFIG_SYS_FSL_SRIO_MAX_PORTS]; +#endif }; #endif @@ -2131,6 +2147,11 @@ typedef struct ccsr_gur { #ifdef CONFIG_MPC8536 #define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25 +#elif defined(CONFIG_PPC_C29X) +#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 +#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT (9 - ((gur->pordevsr2 \ + & MPC85xx_PORDEVSR2_DDR_SPD_0) \ + >> MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT)) #else #if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132) #define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00 @@ -2178,6 +2199,9 @@ typedef struct ccsr_gur { #elif defined(CONFIG_BSC9132) #define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17 +#elif defined(CONFIG_PPC_C29X) +#define MPC85xx_PORDEVSR_IO_SEL 0x00e00000 +#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21 #else #define MPC85xx_PORDEVSR_IO_SEL 0x00780000 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19 @@ -2193,6 +2217,10 @@ typedef struct ccsr_gur { #define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007 u32 pordbgmsr; /* POR debug mode status */ u32 pordevsr2; /* POR I/O device status 2 */ +#if defined(CONFIG_PPC_C29X) +#define MPC85xx_PORDEVSR2_DDR_SPD_0 0x00000008 +#define MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT 3 +#endif /* The 8544 RM says this is bit 26, but it's really bit 24 */ #define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080 u8 res1[8]; @@ -2339,6 +2367,11 @@ typedef struct ccsr_gur { #define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000 #define MPC85xx_PMUXCR0_SIM_SEL 0x00014000 #endif +#if defined(CONFIG_PPC_C29X) +#define MPC85xx_PMUXCR_SPI_MASK 0x00000300 +#define MPC85xx_PMUXCR_SPI 0x00000000 +#define MPC85xx_PMUXCR_SPI_GPIO 0x00000100 +#endif u32 pmuxcr2; /* Alt. function signal multiplex control 2 */ #if defined(CONFIG_P1010) || defined(CONFIG_P1014) #define MPC85xx_PMUXCR2_UART_GPIO 0x40000000 @@ -2526,7 +2559,9 @@ typedef struct serdes_corenet { #define SRDS_RSTCTL_RSTDONE 0x40000000 #define SRDS_RSTCTL_RSTERR 0x20000000 #define SRDS_RSTCTL_SWRST 0x10000000 -#define SRDS_RSTCTL_SDPD 0x00000020 +#define SRDS_RSTCTL_SDEN 0x00000020 +#define SRDS_RSTCTL_SDRST_B 0x00000040 +#define SRDS_RSTCTL_PLLRST_B 0x00000080 u32 pllcr0; /* PLL Control Register 0 */ #define SRDS_PLLCR0_POFF 0x80000000 #define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000 @@ -2811,54 +2846,6 @@ typedef struct ccsr_pme { u8 res4[0x400]; } ccsr_pme_t; -#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE -struct ccsr_usb_port_ctrl { - u32 ctrl; - u32 drvvbuscfg; - u32 pwrfltcfg; - u32 sts; - u8 res_14[0xc]; - u32 bistcfg; - u32 biststs; - u32 abistcfg; - u32 abiststs; - u8 res_30[0x10]; - u32 xcvrprg; - u32 anaprg; - u32 anadrv; - u32 anasts; -}; - -typedef struct ccsr_usb_phy { - u32 id; - struct ccsr_usb_port_ctrl port1; - u8 res_50[0xc]; - u32 tvr; - u32 pllprg[4]; - u8 res_70[0x4]; - u32 anaccfg; - u32 dbg; - u8 res_7c[0x4]; - struct ccsr_usb_port_ctrl port2; - u8 res_dc[0x334]; -} ccsr_usb_phy_t; - -#define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0) -#define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1) -#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16) -#define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21) -#else -typedef struct ccsr_usb_phy { - u8 res0[0x18]; - u32 usb_enable_override; - u8 res[0xe4]; -} ccsr_usb_phy_t; -#define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1 -#endif - #ifdef CONFIG_SYS_FSL_RAID_ENGINE struct ccsr_raide { u8 res0[0x543]; @@ -3008,12 +2995,18 @@ struct ccsr_pman { #define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x23000 #ifdef CONFIG_TSECV2 #define CONFIG_SYS_TSEC1_OFFSET 0xB0000 +#elif defined(CONFIG_TSECV2_1) +#define CONFIG_SYS_TSEC1_OFFSET 0x10000 #else #define CONFIG_SYS_TSEC1_OFFSET 0x24000 #endif #define CONFIG_SYS_MDIO1_OFFSET 0x24000 #define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000 +#if defined(CONFIG_PPC_C29X) +#define CONFIG_SYS_FSL_SEC_OFFSET 0x80000 +#else #define CONFIG_SYS_FSL_SEC_OFFSET 0x30000 +#endif #define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100 #define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000 #define CONFIG_SYS_SNVS_OFFSET 0xE6000 @@ -3031,6 +3024,12 @@ struct ccsr_pman { #define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000 #define CONFIG_SYS_FSL_SRIO_OFFSET 0xC0000 +#if defined(CONFIG_BSC9132) +#define CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET 0x10000 +#define CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR \ + (CONFIG_SYS_FSL_DSP_CCSRBAR + CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET) +#endif + #define CONFIG_SYS_FSL_CPC_ADDR \ (CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET) #define CONFIG_SYS_FSL_QMAN_ADDR \ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 56b22d840a..64a6f9c54e 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1119,6 +1119,9 @@ #define SVR_T4240 0x824000 #define SVR_T4120 0x824001 #define SVR_T4160 0x824100 +#define SVR_C291 0x850000 +#define SVR_C292 0x850020 +#define SVR_C293 0x850030 #define SVR_B4860 0X868000 #define SVR_G4860 0x868001 #define SVR_G4060 0x868003 |
