diff options
Diffstat (limited to 'arch/arm')
27 files changed, 511 insertions, 2571 deletions
diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile index b2d30b1a72..35d8d387bd 100644 --- a/arch/arm/cpu/Makefile +++ b/arch/arm/cpu/Makefile @@ -1,3 +1,6 @@ obj-$(CONFIG_AT91FAMILY) += at91-common/ -obj-$(CONFIG_TEGRA) += $(SOC)-common/ +obj-$(CONFIG_TEGRA20) += tegra20-common/ +obj-$(CONFIG_TEGRA30) += tegra30-common/ +obj-$(CONFIG_TEGRA114) += tegra114-common/ +obj-$(CONFIG_TEGRA124) += tegra124-common/ obj-$(CONFIG_TEGRA) += tegra-common/ diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 3e2358e132..1cfcca9fa6 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -15,48 +15,7 @@ #include <asm-offsets.h> #include <config.h> #include <version.h> -.globl _start -_start: b reset -#ifdef CONFIG_SPL_BUILD - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang -_hang: - .word do_hang - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 /* now 16*4=64 */ -#else - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq - -_undefined_instruction: .word undefined_instruction -_software_interrupt: .word software_interrupt -_prefetch_abort: .word prefetch_abort -_data_abort: .word data_abort -_not_used: .word not_used -_irq: .word irq -_fiq: .word fiq -_pad: .word 0x12345678 /* now 16*4=64 */ -#endif /* CONFIG_SPL_BUILD */ -.global _end_vect -_end_vect: - - .balignl 16,0xdeadbeef /* ************************************************************************* * @@ -70,26 +29,7 @@ _end_vect: ************************************************************************* */ -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ + .globl reset reset: /* @@ -152,195 +92,3 @@ cpu_init_crit: mov lr, ip /* restore link */ mov pc, lr /* back to my caller */ #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -#ifndef CONFIG_SPL_BUILD -/* - ************************************************************************* - * - * Interrupt handling - * - ************************************************************************* - */ -@ -@ IRQ stack frame. -@ -#define S_FRAME_SIZE 72 - -#define S_OLD_R0 68 -#define S_PSR 64 -#define S_PC 60 -#define S_LR 56 -#define S_SP 52 - -#define S_IP 48 -#define S_FP 44 -#define S_R10 40 -#define S_R9 36 -#define S_R8 32 -#define S_R7 28 -#define S_R6 24 -#define S_R5 20 -#define S_R4 16 -#define S_R3 12 -#define S_R2 8 -#define S_R1 4 -#define S_R0 0 - -#define MODE_SVC 0x13 -#define I_BIT 0x80 - -/* - * use bad_save_user_regs for abort/prefetch/undef/swi ... - * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling - */ - - .macro bad_save_user_regs - sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack - stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 - - ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort stack - ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) - add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack - - add r5, sp, #S_SP - mov r1, lr - stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr - mov r0, sp @ save current stack into r0 (param register) - .endm - - .macro irq_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good. - stmdb r8, {sp, lr}^ @ Calling SP, LR - str lr, [r8, #0] @ Save calling PC - mrs r6, spsr - str r6, [r8, #4] @ Save CPSR - str r0, [r8, #8] @ Save OLD_R0 - mov r0, sp - .endm - - .macro irq_restore_user_regs - ldmia sp, {r0 - lr}^ @ Calling r0 - lr - mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC - add sp, sp, #S_FRAME_SIZE - subs pc, lr, #4 @ return & move spsr_svc into cpsr - .endm - - .macro get_bad_stack - ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter in banked mode) - - str lr, [r13] @ save caller lr in position 0 of saved stack - mrs lr, spsr @ get the spsr - str lr, [r13, #4] @ save spsr in position 1 of saved stack - - mov r13, #MODE_SVC @ prepare SVC-Mode - @ msr spsr_c, r13 - msr spsr, r13 @ switch modes, make sure moves will execute - mov lr, pc @ capture return pc - movs pc, lr @ jump to next instruction & switch modes. - .endm - - .macro get_bad_stack_swi - sub r13, r13, #4 @ space on current stack for scratch reg. - str r0, [r13] @ save R0's value. - ldr r0, IRQ_STACK_START_IN @ get data regions start - str lr, [r0] @ save caller lr in position 0 of saved stack - mrs lr, spsr @ get the spsr - str lr, [r0, #4] @ save spsr in position 1 of saved stack - ldr lr, [r0] @ restore lr - ldr r0, [r13] @ restore r0 - add r13, r13, #4 @ pop stack entry - .endm - - .macro get_irq_stack @ setup IRQ stack - ldr sp, IRQ_STACK_START - .endm - - .macro get_fiq_stack @ setup FIQ stack - ldr sp, FIQ_STACK_START - .endm -#endif /* CONFIG_SPL_BUILD */ - -/* - * exception handlers - */ -#ifdef CONFIG_SPL_BUILD - .align 5 -do_hang: - bl hang /* hang and never return */ -#else /* !CONFIG_SPL_BUILD */ - .align 5 -undefined_instruction: - get_bad_stack - bad_save_user_regs - bl do_undefined_instruction - - .align 5 -software_interrupt: - get_bad_stack_swi - bad_save_user_regs - bl do_software_interrupt - - .align 5 -prefetch_abort: - get_bad_stack - bad_save_user_regs - bl do_prefetch_abort - - .align 5 -data_abort: - get_bad_stack - bad_save_user_regs - bl do_data_abort - - .align 5 -not_used: - get_bad_stack - bad_save_user_regs - bl do_not_used - -#ifdef CONFIG_USE_IRQ - - .align 5 -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -fiq: - get_fiq_stack - /* someone ought to write a more effiction fiq_save_user_regs */ - irq_save_user_regs - bl do_fiq - irq_restore_user_regs - -#else - - .align 5 -irq: - get_bad_stack - bad_save_user_regs - bl do_irq - - .align 5 -fiq: - get_bad_stack - bad_save_user_regs - bl do_fiq - -#endif - .align 5 -.global arm1136_cache_flush -arm1136_cache_flush: -#if !defined(CONFIG_SYS_ICACHE_OFF) - mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache -#endif -#if !defined(CONFIG_SYS_DCACHE_OFF) - mcr p15, 0, r1, c7, c14, 0 @ invalidate D cache -#endif - mov pc, lr @ back to caller -#endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index ce620115d4..0704bdde27 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -25,48 +25,6 @@ /* ************************************************************************* * - * Jump vector table as in table 3.1 in [1] - * - ************************************************************************* - */ - -.globl _start -_start: b reset -#ifndef CONFIG_SPL_BUILD - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq - -_undefined_instruction: - .word undefined_instruction -_software_interrupt: - .word software_interrupt -_prefetch_abort: - .word prefetch_abort -_data_abort: - .word data_abort -_not_used: - .word not_used -_irq: - .word irq -_fiq: - .word fiq -_pad: - .word 0x12345678 /* now 16*4=64 */ -#else - . = _start + 64 -#endif - -.global _end_vect -_end_vect: - .balignl 16,0xdeadbeef -/* - ************************************************************************* - * * Startup Code (reset vector) * * do important init only if we don't start from memory! @@ -77,14 +35,7 @@ _end_vect: ************************************************************************* */ -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ + .globl reset reset: /* @@ -182,150 +133,3 @@ skip_tcmdisable: c_runtime_cpu_setup: mov pc, lr - -#ifndef CONFIG_SPL_BUILD -/* - ************************************************************************* - * - * Interrupt handling - * - ************************************************************************* - */ -@ -@ IRQ stack frame. -@ -#define S_FRAME_SIZE 72 - -#define S_OLD_R0 68 -#define S_PSR 64 -#define S_PC 60 -#define S_LR 56 -#define S_SP 52 - -#define S_IP 48 -#define S_FP 44 -#define S_R10 40 -#define S_R9 36 -#define S_R8 32 -#define S_R7 28 -#define S_R6 24 -#define S_R5 20 -#define S_R4 16 -#define S_R3 12 -#define S_R2 8 -#define S_R1 4 -#define S_R0 0 - -#define MODE_SVC 0x13 -#define I_BIT 0x80 - -/* - * use bad_save_user_regs for abort/prefetch/undef/swi ... - */ - - .macro bad_save_user_regs - /* carve out a frame on current user stack */ - sub sp, sp, #S_FRAME_SIZE - /* Save user registers (now in svc mode) r0-r12 */ - stmia sp, {r0 - r12} - - ldr r2, IRQ_STACK_START_IN - /* get values for "aborted" pc and cpsr (into parm regs) */ - ldmia r2, {r2 - r3} - /* grab pointer to old stack */ - add r0, sp, #S_FRAME_SIZE - - add r5, sp, #S_SP - mov r1, lr - /* save sp_SVC, lr_SVC, pc, cpsr */ - stmia r5, {r0 - r3} - /* save current stack into r0 (param register) */ - mov r0, sp - .endm - - .macro get_bad_stack - ldr r13, IRQ_STACK_START_IN @ setup our mode stack - - /* save caller lr in position 0 of saved stack */ - str lr, [r13] - /* get the spsr */ - mrs lr, spsr - /* save spsr in position 1 of saved stack */ - str lr, [r13, #4] - - /* prepare SVC-Mode */ - mov r13, #MODE_SVC - @ msr spsr_c, r13 - /* switch modes, make sure moves will execute */ - msr spsr, r13 - /* capture return pc */ - mov lr, pc - /* jump to next instruction & switch modes. */ - movs pc, lr - .endm - - .macro get_bad_stack_swi - /* space on current stack for scratch reg. */ - sub r13, r13, #4 - /* save R0's value. */ - str r0, [r13] - ldr r13, IRQ_STACK_START_IN @ setup our mode stack - /* save caller lr in position 0 of saved stack */ - str lr, [r0] - /* get the spsr */ - mrs lr, spsr - /* save spsr in position 1 of saved stack */ - str lr, [r0, #4] - /* restore lr */ - ldr lr, [r0] - /* restore r0 */ - ldr r0, [r13] - /* pop stack entry */ - add r13, r13, #4 - .endm - -/* - * exception handlers - */ - .align 5 -undefined_instruction: - get_bad_stack - bad_save_user_regs - bl do_undefined_instruction - - .align 5 -software_interrupt: - get_bad_stack_swi - bad_save_user_regs - bl do_software_interrupt - - .align 5 -prefetch_abort: - get_bad_stack - bad_save_user_regs - bl do_prefetch_abort - - .align 5 -data_abort: - get_bad_stack - bad_save_user_regs - bl do_data_abort - - .align 5 -not_used: - get_bad_stack - bad_save_user_regs - bl do_not_used - - .align 5 -irq: - get_bad_stack - bad_save_user_regs - bl do_irq - - .align 5 -fiq: - get_bad_stack - bad_save_user_regs - bl do_fiq -#endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 1a34842690..01c85be64b 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -15,48 +15,6 @@ /* ************************************************************************* * - * Jump vector table as in table 3.1 in [1] - * - ************************************************************************* - */ - - -.globl _start -_start: b reset - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq - -#ifdef CONFIG_SPL_BUILD -_undefined_instruction: .word _undefined_instruction -_software_interrupt: .word _software_interrupt -_prefetch_abort: .word _prefetch_abort -_data_abort: .word _data_abort -_not_used: .word _not_used -_irq: .word _irq -_fiq: .word _fiq -_pad: .word 0x12345678 /* now 16*4=64 */ -#else -_undefined_instruction: .word undefined_instruction -_software_interrupt: .word software_interrupt -_prefetch_abort: .word prefetch_abort -_data_abort: .word data_abort -_not_used: .word not_used -_irq: .word irq -_fiq: .word fiq -_pad: .word 0x12345678 /* now 16*4=64 */ -#endif /* CONFIG_SPL_BUILD */ - - .balignl 16,0xdeadbeef - - -/* - ************************************************************************* - * * Startup Code (reset vector) * * do important init only if we don't start from RAM! @@ -67,26 +25,7 @@ _pad: .word 0x12345678 /* now 16*4=64 */ ************************************************************************* */ -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ + .globl reset reset: /* @@ -139,169 +78,3 @@ cpu_init_crit: mov pc, lr #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - - -#ifndef CONFIG_SPL_BUILD -/* - ************************************************************************* - * - * Interrupt handling - * - ************************************************************************* - */ - -@ -@ IRQ stack frame. -@ -#define S_FRAME_SIZE 72 - -#define S_OLD_R0 68 -#define S_PSR 64 -#define S_PC 60 -#define S_LR 56 -#define S_SP 52 - -#define S_IP 48 -#define S_FP 44 -#define S_R10 40 -#define S_R9 36 -#define S_R8 32 -#define S_R7 28 -#define S_R6 24 -#define S_R5 20 -#define S_R4 16 -#define S_R3 12 -#define S_R2 8 -#define S_R1 4 -#define S_R0 0 - -#define MODE_SVC 0x13 -#define I_BIT 0x80 - -/* - * use bad_save_user_regs for abort/prefetch/undef/swi ... - * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling - */ - - .macro bad_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - add r8, sp, #S_PC - - ldr r2, IRQ_STACK_START_IN - ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0 - add r0, sp, #S_FRAME_SIZE @ restore sp_SVC - - add r5, sp, #S_SP - mov r1, lr - stmia r5, {r0 - r4} @ save sp_SVC, lr_SVC, pc, cpsr, old_r - mov r0, sp - .endm - - .macro irq_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - add r8, sp, #S_PC - stmdb r8, {sp, lr}^ @ Calling SP, LR - str lr, [r8, #0] @ Save calling PC - mrs r6, spsr - str r6, [r8, #4] @ Save CPSR - str r0, [r8, #8] @ Save OLD_R0 - mov r0, sp - .endm - - .macro irq_restore_user_regs - ldmia sp, {r0 - lr}^ @ Calling r0 - lr - mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC - add sp, sp, #S_FRAME_SIZE - subs pc, lr, #4 @ return & move spsr_svc into cpsr - .endm - - .macro get_bad_stack - ldr r13, IRQ_STACK_START_IN @ setup our mode stack - - str lr, [r13] @ save caller lr / spsr - mrs lr, spsr - str lr, [r13, #4] - - mov r13, #MODE_SVC @ prepare SVC-Mode - msr spsr_c, r13 - mov lr, pc - movs pc, lr - .endm - - .macro get_irq_stack @ setup IRQ stack - ldr sp, IRQ_STACK_START - .endm - - .macro get_fiq_stack @ setup FIQ stack - ldr sp, FIQ_STACK_START - .endm - -/* - * exception handlers - */ - .align 5 -undefined_instruction: - get_bad_stack - bad_save_user_regs - bl do_undefined_instruction - - .align 5 -software_interrupt: - get_bad_stack - bad_save_user_regs - bl do_software_interrupt - - .align 5 -prefetch_abort: - get_bad_stack - bad_save_user_regs - bl do_prefetch_abort - - .align 5 -data_abort: - get_bad_stack - bad_save_user_regs - bl do_data_abort - - .align 5 -not_used: - get_bad_stack - bad_save_user_regs - bl do_not_used - -#ifdef CONFIG_USE_IRQ - - .align 5 -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -fiq: - get_fiq_stack - /* someone ought to write a more effiction fiq_save_user_regs */ - irq_save_user_regs - bl do_fiq - irq_restore_user_regs - -#else - - .align 5 -irq: - get_bad_stack - bad_save_user_regs - bl do_irq - - .align 5 -fiq: - get_bad_stack - bad_save_user_regs - bl do_fiq - -#endif -#endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds index 96994043e4..623a635208 100644 --- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds +++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds @@ -16,7 +16,8 @@ SECTIONS .text : { *(.__image_copy_start) - arch/arm/cpu/arm920t/start.o (.text*) + *(.vectors) + arch/arm/cpu/arm920t/start.o (.text*) /* the EP93xx expects to find the pattern 'CRUS' at 0x1000 */ . = 0x1000; LONG(0x53555243) diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 7bf094aec1..07404502c8 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -15,36 +15,6 @@ /* ************************************************************************* * - * Jump vector table as in table 3.1 in [1] - * - ************************************************************************* - */ - - -.globl _start -_start: b start_code - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq - -_undefined_instruction: .word undefined_instruction -_software_interrupt: .word software_interrupt -_prefetch_abort: .word prefetch_abort -_data_abort: .word data_abort -_not_used: .word not_used -_irq: .word irq -_fiq: .word fiq - - .balignl 16,0xdeadbeef - - -/* - ************************************************************************* - * * Startup Code (called from the ARM reset exception vector) * * do important init only if we don't start from memory! @@ -55,28 +25,9 @@ _fiq: .word fiq ************************************************************************* */ -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de + .globl reset -/* - * the actual start code - */ - -start_code: +reset: /* * set the cpu to SVC32 mode */ @@ -196,166 +147,3 @@ cpu_init_crit: mov lr, ip mov pc, lr #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -/* - ************************************************************************* - * - * Interrupt handling - * - ************************************************************************* - */ - -@ -@ IRQ stack frame. -@ -#define S_FRAME_SIZE 72 - -#define S_OLD_R0 68 -#define S_PSR 64 -#define S_PC 60 -#define S_LR 56 -#define S_SP 52 - -#define S_IP 48 -#define S_FP 44 -#define S_R10 40 -#define S_R9 36 -#define S_R8 32 -#define S_R7 28 -#define S_R6 24 -#define S_R5 20 -#define S_R4 16 -#define S_R3 12 -#define S_R2 8 -#define S_R1 4 -#define S_R0 0 - -#define MODE_SVC 0x13 -#define I_BIT 0x80 - -/* - * use bad_save_user_regs for abort/prefetch/undef/swi ... - * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling - */ - - .macro bad_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - ldr r2, IRQ_STACK_START_IN - ldmia r2, {r2 - r3} @ get pc, cpsr - add r0, sp, #S_FRAME_SIZE @ restore sp_SVC - - add r5, sp, #S_SP - mov r1, lr - stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr - mov r0, sp - .endm - - .macro irq_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - add r7, sp, #S_PC - stmdb r7, {sp, lr}^ @ Calling SP, LR - str lr, [r7, #0] @ Save calling PC - mrs r6, spsr - str r6, [r7, #4] @ Save CPSR - str r0, [r7, #8] @ Save OLD_R0 - mov r0, sp - .endm - - .macro irq_restore_user_regs - ldmia sp, {r0 - lr}^ @ Calling r0 - lr - mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC - add sp, sp, #S_FRAME_SIZE - /* return & move spsr_svc into cpsr */ - subs pc, lr, #4 - .endm - - .macro get_bad_stack - ldr r13, IRQ_STACK_START_IN @ setup our mode stack - - str lr, [r13] @ save caller lr / spsr - mrs lr, spsr - str lr, [r13, #4] - - mov r13, #MODE_SVC @ prepare SVC-Mode - @ msr spsr_c, r13 - msr spsr, r13 - mov lr, pc - movs pc, lr - .endm - - .macro get_irq_stack @ setup IRQ stack - ldr sp, IRQ_STACK_START - .endm - - .macro get_fiq_stack @ setup FIQ stack - ldr sp, FIQ_STACK_START - .endm - -/* - * exception handlers - */ - .align 5 -undefined_instruction: - get_bad_stack - bad_save_user_regs - bl do_undefined_instruction - - .align 5 -software_interrupt: - get_bad_stack - bad_save_user_regs - bl do_software_interrupt - - .align 5 -prefetch_abort: - get_bad_stack - bad_save_user_regs - bl do_prefetch_abort - - .align 5 -data_abort: - get_bad_stack - bad_save_user_regs - bl do_data_abort - - .align 5 -not_used: - get_bad_stack - bad_save_user_regs - bl do_not_used - -#ifdef CONFIG_USE_IRQ - - .align 5 -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -fiq: - get_fiq_stack - /* someone ought to write a more effiction fiq_save_user_regs */ - irq_save_user_regs - bl do_fiq - irq_restore_user_regs - -#else - - .align 5 -irq: - get_bad_stack - bad_save_user_regs - bl do_irq - - .align 5 -fiq: - get_bad_stack - bad_save_user_regs - bl do_fiq - -#endif diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S index 34a0fcb462..9b60436539 100644 --- a/arch/arm/cpu/arm926ejs/mxs/start.S +++ b/arch/arm/cpu/arm926ejs/mxs/start.S @@ -27,70 +27,6 @@ /* ************************************************************************* * - * Jump vector table as in table 3.1 in [1] - * - ************************************************************************* - */ - - -.globl _start -_start: - b reset - b undefined_instruction - b software_interrupt - b prefetch_abort - b data_abort - b not_used - b irq - b fiq - -/* - * Vector table, located at address 0x20. - * This table allows the code running AFTER SPL, the U-Boot, to install it's - * interrupt handlers here. The problem is that the U-Boot is loaded into RAM, - * including it's interrupt vectoring table and the table at 0x0 is still the - * SPLs. So if interrupt happens in U-Boot, the SPLs interrupt vectoring table - * is still used. - */ -_vt_reset: - .word _reset -_vt_undefined_instruction: - .word _hang -_vt_software_interrupt: - .word _hang -_vt_prefetch_abort: - .word _hang -_vt_data_abort: - .word _hang -_vt_not_used: - .word _reset -_vt_irq: - .word _hang -_vt_fiq: - .word _hang - -reset: - ldr pc, _vt_reset -undefined_instruction: - ldr pc, _vt_undefined_instruction -software_interrupt: - ldr pc, _vt_software_interrupt -prefetch_abort: - ldr pc, _vt_prefetch_abort -data_abort: - ldr pc, _vt_data_abort -not_used: - ldr pc, _vt_not_used -irq: - ldr pc, _vt_irq -fiq: - ldr pc, _vt_fiq - - .balignl 16,0xdeadbeef - -/* - ************************************************************************* - * * Startup Code (reset vector) * * do important init only if we don't start from memory! @@ -101,28 +37,8 @@ fiq: ************************************************************************* */ -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ - -_reset: + .globl reset +reset: /* * If the CPU is configured in "Wait JTAG connection mode", the stack * pointer is not configured and is zero. This will cause crash when @@ -179,7 +95,3 @@ _reset: mov r0, #0 bx lr - -_hang: -1: - bl 1b /* hang and never return */ diff --git a/arch/arm/cpu/arm926ejs/spear/start.S b/arch/arm/cpu/arm926ejs/spear/start.S index 7dbd5dbf99..290ac2e561 100644 --- a/arch/arm/cpu/arm926ejs/spear/start.S +++ b/arch/arm/cpu/arm926ejs/spear/start.S @@ -17,29 +17,6 @@ #include <config.h> -.globl _start -_start: - b reset - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq - -_undefined_instruction: -_software_interrupt: -_prefetch_abort: -_data_abort: -_not_used: -_irq: -_fiq: - .word infinite_loop - -infinite_loop: - b infinite_loop - /* ************************************************************************* * @@ -53,9 +30,7 @@ infinite_loop: ************************************************************************* */ -/* - * the actual reset code - */ + .globl reset reset: /* diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds index b6d0f65b66..c7ee19912f 100644 --- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds @@ -21,6 +21,7 @@ SECTIONS . = ALIGN(4); .text : { + *(.vectors) arch/arm/cpu/arm926ejs/spear/start.o (.text*) *(.text*) } diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 0717327050..8eb249475e 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -23,75 +23,6 @@ /* ************************************************************************* * - * Jump vector table as in table 3.1 in [1] - * - ************************************************************************* - */ - - -#ifdef CONFIG_SYS_DV_NOR_BOOT_CFG -.globl _start -_start: -.globl _NOR_BOOT_CFG -_NOR_BOOT_CFG: - .word CONFIG_SYS_DV_NOR_BOOT_CFG - b reset -#else -.globl _start -_start: - b reset -#endif -#ifdef CONFIG_SPL_BUILD -/* No exception handlers in preloader */ - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - -_hang: - .word do_hang -/* pad to 64 byte boundary */ - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 -#else - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq - -_undefined_instruction: - .word undefined_instruction -_software_interrupt: - .word software_interrupt -_prefetch_abort: - .word prefetch_abort -_data_abort: - .word data_abort -_not_used: - .word not_used -_irq: - .word irq -_fiq: - .word fiq - -#endif /* CONFIG_SPL_BUILD */ - .balignl 16,0xdeadbeef - - -/* - ************************************************************************* - * * Startup Code (reset vector) * * do important init only if we don't start from memory! @@ -102,26 +33,7 @@ _fiq: ************************************************************************* */ -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ + .globl reset reset: /* @@ -198,175 +110,3 @@ flush_dcache: mov lr, ip /* restore link */ mov pc, lr /* back to my caller */ #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -#ifndef CONFIG_SPL_BUILD -/* - ************************************************************************* - * - * Interrupt handling - * - ************************************************************************* - */ - -@ -@ IRQ stack frame. -@ -#define S_FRAME_SIZE 72 - -#define S_OLD_R0 68 -#define S_PSR 64 -#define S_PC 60 -#define S_LR 56 -#define S_SP 52 - -#define S_IP 48 -#define S_FP 44 -#define S_R10 40 -#define S_R9 36 -#define S_R8 32 -#define S_R7 28 -#define S_R6 24 -#define S_R5 20 -#define S_R4 16 -#define S_R3 12 -#define S_R2 8 -#define S_R1 4 -#define S_R0 0 - -#define MODE_SVC 0x13 -#define I_BIT 0x80 - -/* - * use bad_save_user_regs for abort/prefetch/undef/swi ... - * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling - */ - - .macro bad_save_user_regs - @ carve out a frame on current user stack - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 - ldr r2, IRQ_STACK_START_IN - @ get values for "aborted" pc and cpsr (into parm regs) - ldmia r2, {r2 - r3} - add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack - add r5, sp, #S_SP - mov r1, lr - stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr - mov r0, sp @ save current stack into r0 (param register) - .endm - - .macro irq_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good. - add r8, sp, #S_PC - stmdb r8, {sp, lr}^ @ Calling SP, LR - str lr, [r8, #0] @ Save calling PC - mrs r6, spsr - str r6, [r8, #4] @ Save CPSR - str r0, [r8, #8] @ Save OLD_R0 - mov r0, sp - .endm - - .macro irq_restore_user_regs - ldmia sp, {r0 - lr}^ @ Calling r0 - lr - mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC - add sp, sp, #S_FRAME_SIZE - subs pc, lr, #4 @ return & move spsr_svc into cpsr - .endm - - .macro get_bad_stack - ldr r13, IRQ_STACK_START_IN @ setup our mode stack - - str lr, [r13] @ save caller lr in position 0 of saved stack - mrs lr, spsr @ get the spsr - str lr, [r13, #4] @ save spsr in position 1 of saved stack - mov r13, #MODE_SVC @ prepare SVC-Mode - @ msr spsr_c, r13 - msr spsr, r13 @ switch modes, make sure moves will execute - mov lr, pc @ capture return pc - movs pc, lr @ jump to next instruction & switch modes. - .endm - - .macro get_irq_stack @ setup IRQ stack - ldr sp, IRQ_STACK_START - .endm - - .macro get_fiq_stack @ setup FIQ stack - ldr sp, FIQ_STACK_START - .endm -#endif /* CONFIG_SPL_BUILD */ - -/* - * exception handlers - */ -#ifdef CONFIG_SPL_BUILD - .align 5 -do_hang: -1: - bl 1b /* hang and never return */ -#else /* !CONFIG_SPL_BUILD */ - .align 5 -undefined_instruction: - get_bad_stack - bad_save_user_regs - bl do_undefined_instruction - - .align 5 -software_interrupt: - get_bad_stack - bad_save_user_regs - bl do_software_interrupt - - .align 5 -prefetch_abort: - get_bad_stack - bad_save_user_regs - bl do_prefetch_abort - - .align 5 -data_abort: - get_bad_stack - bad_save_user_regs - bl do_data_abort - - .align 5 -not_used: - get_bad_stack - bad_save_user_regs - bl do_not_used - -#ifdef CONFIG_USE_IRQ - - .align 5 -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -fiq: - get_fiq_stack - /* someone ought to write a more effiction fiq_save_user_regs */ - irq_save_user_regs - bl do_fiq - irq_restore_user_regs - -#else - - .align 5 -irq: - get_bad_stack - bad_save_user_regs - bl do_irq - - .align 5 -fiq: - get_bad_stack - bad_save_user_regs - bl do_fiq - -#endif -#endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/arm946es/cpu.c b/arch/arm/cpu/arm946es/cpu.c index 0c8d92d737..e20e5a89aa 100644 --- a/arch/arm/cpu/arm946es/cpu.c +++ b/arch/arm/cpu/arm946es/cpu.c @@ -16,6 +16,7 @@ #include <common.h> #include <command.h> #include <asm/system.h> +#include <asm/io.h> static void cache_flush(void); @@ -51,3 +52,15 @@ static void cache_flush (void) asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i)); asm ("mcr p15, 0, %0, c7, c6, 0": :"r" (i)); } + +#ifndef CONFIG_INTEGRATOR + +__attribute__((noreturn)) void reset_cpu(ulong addr __attribute__((unused))) +{ + writew(0x0, 0xfffece10); + writew(0x8, 0xfffece10); + for (;;) + ; +} + +#endif /* #ifdef CONFIG_INTEGRATOR */ diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index 7d50145836..41123716a7 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -22,45 +22,6 @@ /* ************************************************************************* * - * Jump vector table as in table 3.1 in [1] - * - ************************************************************************* - */ - - -.globl _start -_start: - b reset - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq - -_undefined_instruction: - .word undefined_instruction -_software_interrupt: - .word software_interrupt -_prefetch_abort: - .word prefetch_abort -_data_abort: - .word data_abort -_not_used: - .word not_used -_irq: - .word irq -_fiq: - .word fiq - - .balignl 16,0xdeadbeef - -_vectors_end: - -/* - ************************************************************************* - * * Startup Code (reset vector) * * do important init only if we don't start from memory! @@ -71,26 +32,7 @@ _vectors_end: ************************************************************************* */ -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ + .globl reset reset: /* @@ -157,189 +99,3 @@ cpu_init_crit: mov lr, ip /* restore link */ mov pc, lr /* back to my caller */ #endif -/* - ************************************************************************* - * - * Interrupt handling - * - ************************************************************************* - */ - -@ -@ IRQ stack frame. -@ -#define S_FRAME_SIZE 72 - -#define S_OLD_R0 68 -#define S_PSR 64 -#define S_PC 60 -#define S_LR 56 -#define S_SP 52 - -#define S_IP 48 -#define S_FP 44 -#define S_R10 40 -#define S_R9 36 -#define S_R8 32 -#define S_R7 28 -#define S_R6 24 -#define S_R5 20 -#define S_R4 16 -#define S_R3 12 -#define S_R2 8 -#define S_R1 4 -#define S_R0 0 - -#define MODE_SVC 0x13 -#define I_BIT 0x80 - -/* - * use bad_save_user_regs for abort/prefetch/undef/swi ... - * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling - */ - - .macro bad_save_user_regs - @ carve out a frame on current user stack - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 - - ldr r2, IRQ_STACK_START_IN - @ get values for "aborted" pc and cpsr (into parm regs) - ldmia r2, {r2 - r3} - add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack - add r5, sp, #S_SP - mov r1, lr - stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr - mov r0, sp @ save current stack into r0 (param register) - .endm - - .macro irq_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good. - add r8, sp, #S_PC - stmdb r8, {sp, lr}^ @ Calling SP, LR - str lr, [r8, #0] @ Save calling PC - mrs r6, spsr - str r6, [r8, #4] @ Save CPSR - str r0, [r8, #8] @ Save OLD_R0 - mov r0, sp - .endm - - .macro irq_restore_user_regs - ldmia sp, {r0 - lr}^ @ Calling r0 - lr - mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC - add sp, sp, #S_FRAME_SIZE - subs pc, lr, #4 @ return & move spsr_svc into cpsr - .endm - - .macro get_bad_stack - ldr r13, IRQ_STACK_START_IN @ setup our mode stack - - str lr, [r13] @ save caller lr in position 0 of saved stack - mrs lr, spsr @ get the spsr - str lr, [r13, #4] @ save spsr in position 1 of saved stack - mov r13, #MODE_SVC @ prepare SVC-Mode - @ msr spsr_c, r13 - msr spsr, r13 @ switch modes, make sure moves will execute - mov lr, pc @ capture return pc - movs pc, lr @ jump to next instruction & switch modes. - .endm - - .macro get_irq_stack @ setup IRQ stack - ldr sp, IRQ_STACK_START - .endm - - .macro get_fiq_stack @ setup FIQ stack - ldr sp, FIQ_STACK_START - .endm - -/* - * exception handlers - */ - .align 5 -undefined_instruction: - get_bad_stack - bad_save_user_regs - bl do_undefined_instruction - - .align 5 -software_interrupt: - get_bad_stack - bad_save_user_regs - bl do_software_interrupt - - .align 5 -prefetch_abort: - get_bad_stack - bad_save_user_regs - bl do_prefetch_abort - - .align 5 -data_abort: - get_bad_stack - bad_save_user_regs - bl do_data_abort - - .align 5 -not_used: - get_bad_stack - bad_save_user_regs - bl do_not_used - -#ifdef CONFIG_USE_IRQ - - .align 5 -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -fiq: - get_fiq_stack - /* someone ought to write a more effiction fiq_save_user_regs */ - irq_save_user_regs - bl do_fiq - irq_restore_user_regs - -#else - - .align 5 -irq: - get_bad_stack - bad_save_user_regs - bl do_irq - - .align 5 -fiq: - get_bad_stack - bad_save_user_regs - bl do_fiq - -#endif - -# ifdef CONFIG_INTEGRATOR - - /* Satisfied by general board level routine */ - -#else - - .align 5 -.globl reset_cpu -reset_cpu: - - ldr r1, rstctl1 /* get clkm1 reset ctl */ - mov r3, #0x0 - strh r3, [r1] /* clear it */ - mov r3, #0x8 - strh r3, [r1] /* force dsp+arm reset */ -_loop_forever: - b _loop_forever - -rstctl1: - .word 0xfffece10 - -#endif /* #ifdef CONFIG_INTEGRATOR */ diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index 7404ea7348..c0c07b6a11 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -21,42 +21,6 @@ /* ************************************************************************* * - * Jump vector table - * - ************************************************************************* - */ - -.globl _start -_start: - b reset - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq - -_undefined_instruction: - .word undefined_instruction -_software_interrupt: - .word software_interrupt -_prefetch_abort: - .word prefetch_abort -_data_abort: - .word data_abort -_not_used: - .word not_used -_irq: - .word irq -_fiq: - .word fiq - - .balignl 16,0xdeadbeef - -/* - ************************************************************************* - * * Startup Code (reset vector) * * do important init only if we don't start from memory! @@ -67,26 +31,7 @@ _fiq: ************************************************************************* */ -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ + .globl reset reset: /* @@ -132,174 +77,3 @@ cpu_init_crit: */ mov pc, lr /* back to my caller */ #endif -/* - ************************************************************************* - * - * Interrupt handling - * - ************************************************************************* - */ - -@ -@ IRQ stack frame. -@ -#define S_FRAME_SIZE 72 - -#define S_OLD_R0 68 -#define S_PSR 64 -#define S_PC 60 -#define S_LR 56 -#define S_SP 52 - -#define S_IP 48 -#define S_FP 44 -#define S_R10 40 -#define S_R9 36 -#define S_R8 32 -#define S_R7 28 -#define S_R6 24 -#define S_R5 20 -#define S_R4 16 -#define S_R3 12 -#define S_R2 8 -#define S_R1 4 -#define S_R0 0 - -#define MODE_SVC 0x13 -#define I_BIT 0x80 - -/* - * use bad_save_user_regs for abort/prefetch/undef/swi ... - * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling - */ - - .macro bad_save_user_regs - @ carve out a frame on current user stack - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 - - ldr r2, IRQ_STACK_START_IN - @ get values for "aborted" pc and cpsr (into parm regs) - ldmia r2, {r2 - r3} - add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack - add r5, sp, #S_SP - mov r1, lr - stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr - mov r0, sp @ save current stack into r0 (param register) - .endm - - .macro irq_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good. - add r8, sp, #S_PC - stmdb r8, {sp, lr}^ @ Calling SP, LR - str lr, [r8, #0] @ Save calling PC - mrs r6, spsr - str r6, [r8, #4] @ Save CPSR - str r0, [r8, #8] @ Save OLD_R0 - mov r0, sp - .endm - - .macro irq_restore_user_regs - ldmia sp, {r0 - lr}^ @ Calling r0 - lr - mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC - add sp, sp, #S_FRAME_SIZE - subs pc, lr, #4 @ return & move spsr_svc into cpsr - .endm - - .macro get_bad_stack - ldr r13, IRQ_STACK_START_IN @ setup our mode stack - - str lr, [r13] @ save caller lr in position 0 of saved stack - mrs lr, spsr @ get the spsr - str lr, [r13, #4] @ save spsr in position 1 of saved stack - mov r13, #MODE_SVC @ prepare SVC-Mode - @ msr spsr_c, r13 - msr spsr, r13 @ switch modes, make sure moves will execute - mov lr, pc @ capture return pc - movs pc, lr @ jump to next instruction & switch modes. - .endm - - .macro get_irq_stack @ setup IRQ stack - ldr sp, IRQ_STACK_START - .endm - - .macro get_fiq_stack @ setup FIQ stack - ldr sp, FIQ_STACK_START - .endm - -/* - * exception handlers - */ - .align 5 -.globl undefined_instruction -undefined_instruction: - get_bad_stack - bad_save_user_regs - bl do_undefined_instruction - - .align 5 -.globl software_interrupt -software_interrupt: - get_bad_stack - bad_save_user_regs - bl do_software_interrupt - - .align 5 -.globl prefetch_abort -prefetch_abort: - get_bad_stack - bad_save_user_regs - bl do_prefetch_abort - - .align 5 -.globl data_abort -data_abort: - get_bad_stack - bad_save_user_regs - bl do_data_abort - - .align 5 -.globl not_used -not_used: - get_bad_stack - bad_save_user_regs - bl do_not_used - -#ifdef CONFIG_USE_IRQ - .align 5 -.globl irq -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -.globl fiq -fiq: - get_fiq_stack - /* someone ought to write a more effiction fiq_save_user_regs */ - irq_save_user_regs - bl do_fiq - irq_restore_user_regs - -#else - - .align 5 -.globl irq -irq: - get_bad_stack - bad_save_user_regs - bl do_irq - - .align 5 -.globl fiq -fiq: - get_bad_stack - bad_save_user_regs - bl do_fiq - -#endif diff --git a/arch/arm/cpu/armv7/socfpga/lowlevel_init.S b/arch/arm/cpu/armv7/socfpga/lowlevel_init.S index 1caaa2759f..2f2e9fcc7c 100644 --- a/arch/arm/cpu/armv7/socfpga/lowlevel_init.S +++ b/arch/arm/cpu/armv7/socfpga/lowlevel_init.S @@ -10,20 +10,7 @@ /* Save the parameter pass in by previous boot loader */ .global save_boot_params save_boot_params: - /* save the parameter here */ - - /* - * Setup stack for exception, which is located - * at the end of on-chip RAM. We don't expect exception prior to - * relocation and if that happens, we won't worry -- it will overide - * global data region as the code will goto reset. After relocation, - * this region won't be used by other part of program. - * Hence it is safe. - */ - ldr r0, =(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE) - ldr r1, =IRQ_STACK_START_IN - str r0, [r1] - + /* no parameter to save */ bx lr diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 27be451a89..fedd7c8f7e 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -19,46 +19,6 @@ #include <asm/system.h> #include <linux/linkage.h> -.globl _start -_start: b reset - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq -#ifdef CONFIG_SPL_BUILD -_undefined_instruction: .word _undefined_instruction -_software_interrupt: .word _software_interrupt -_prefetch_abort: .word _prefetch_abort -_data_abort: .word _data_abort -_not_used: .word _not_used -_irq: .word _irq -_fiq: .word _fiq -_pad: .word 0x12345678 /* now 16*4=64 */ -#else -.globl _undefined_instruction -_undefined_instruction: .word undefined_instruction -.globl _software_interrupt -_software_interrupt: .word software_interrupt -.globl _prefetch_abort -_prefetch_abort: .word prefetch_abort -.globl _data_abort -_data_abort: .word data_abort -.globl _not_used -_not_used: .word not_used -.globl _irq -_irq: .word irq -.globl _fiq -_fiq: .word fiq -_pad: .word 0x12345678 /* now 16*4=64 */ -#endif /* CONFIG_SPL_BUILD */ - -.global _end_vect -_end_vect: - - .balignl 16,0xdeadbeef /************************************************************************* * * Startup Code (reset vector) @@ -70,26 +30,7 @@ _end_vect: * *************************************************************************/ -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ + .globl reset reset: bl save_boot_params @@ -250,195 +191,3 @@ ENTRY(cpu_init_crit) b lowlevel_init @ go setup pll,mux,memory ENDPROC(cpu_init_crit) #endif - -#ifndef CONFIG_SPL_BUILD -/* - ************************************************************************* - * - * Interrupt handling - * - ************************************************************************* - */ -@ -@ IRQ stack frame. -@ -#define S_FRAME_SIZE 72 - -#define S_OLD_R0 68 -#define S_PSR 64 -#define S_PC 60 -#define S_LR 56 -#define S_SP 52 - -#define S_IP 48 -#define S_FP 44 -#define S_R10 40 -#define S_R9 36 -#define S_R8 32 -#define S_R7 28 -#define S_R6 24 -#define S_R5 20 -#define S_R4 16 -#define S_R3 12 -#define S_R2 8 -#define S_R1 4 -#define S_R0 0 - -#define MODE_SVC 0x13 -#define I_BIT 0x80 - -/* - * use bad_save_user_regs for abort/prefetch/undef/swi ... - * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling - */ - - .macro bad_save_user_regs - sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current - @ user stack - stmia sp, {r0 - r12} @ Save user registers (now in - @ svc mode) r0-r12 - ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort - @ stack - ldmia r2, {r2 - r3} @ get values for "aborted" pc - @ and cpsr (into parm regs) - add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack - - add r5, sp, #S_SP - mov r1, lr - stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr - mov r0, sp @ save current stack into r0 - @ (param register) - .endm - - .macro irq_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - add r8, sp, #S_PC @ !! R8 NEEDS to be saved !! - @ a reserved stack spot would - @ be good. - stmdb r8, {sp, lr}^ @ Calling SP, LR - str lr, [r8, #0] @ Save calling PC - mrs r6, spsr - str r6, [r8, #4] @ Save CPSR - str r0, [r8, #8] @ Save OLD_R0 - mov r0, sp - .endm - - .macro irq_restore_user_regs - ldmia sp, {r0 - lr}^ @ Calling r0 - lr - mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC - add sp, sp, #S_FRAME_SIZE - subs pc, lr, #4 @ return & move spsr_svc into - @ cpsr - .endm - - .macro get_bad_stack - ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter - @ in banked mode) - - str lr, [r13] @ save caller lr in position 0 - @ of saved stack - mrs lr, spsr @ get the spsr - str lr, [r13, #4] @ save spsr in position 1 of - @ saved stack - - mov r13, #MODE_SVC @ prepare SVC-Mode - @ msr spsr_c, r13 - msr spsr, r13 @ switch modes, make sure - @ moves will execute - mov lr, pc @ capture return pc - movs pc, lr @ jump to next instruction & - @ switch modes. - .endm - - .macro get_bad_stack_swi - sub r13, r13, #4 @ space on current stack for - @ scratch reg. - str r0, [r13] @ save R0's value. - ldr r0, IRQ_STACK_START_IN @ get data regions start - @ spots for abort stack - str lr, [r0] @ save caller lr in position 0 - @ of saved stack - mrs lr, spsr @ get the spsr - str lr, [r0, #4] @ save spsr in position 1 of - @ saved stack - ldr lr, [r0] @ restore lr - ldr r0, [r13] @ restore r0 - add r13, r13, #4 @ pop stack entry - .endm - - .macro get_irq_stack @ setup IRQ stack - ldr sp, IRQ_STACK_START - .endm - - .macro get_fiq_stack @ setup FIQ stack - ldr sp, FIQ_STACK_START - .endm - -/* - * exception handlers - */ - .align 5 -undefined_instruction: - get_bad_stack - bad_save_user_regs - bl do_undefined_instruction - - .align 5 -software_interrupt: - get_bad_stack_swi - bad_save_user_regs - bl do_software_interrupt - - .align 5 -prefetch_abort: - get_bad_stack - bad_save_user_regs - bl do_prefetch_abort - - .align 5 -data_abort: - get_bad_stack - bad_save_user_regs - bl do_data_abort - - .align 5 -not_used: - get_bad_stack - bad_save_user_regs - bl do_not_used - -#ifdef CONFIG_USE_IRQ - - .align 5 -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -fiq: - get_fiq_stack - /* someone ought to write a more effective fiq_save_user_regs */ - irq_save_user_regs - bl do_fiq - irq_restore_user_regs - -#else - - .align 5 -irq: - get_bad_stack - bad_save_user_regs - bl do_irq - - .align 5 -fiq: - get_bad_stack - bad_save_user_regs - bl do_fiq - -#endif /* CONFIG_USE_IRQ */ -#endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/armv7/zynq/u-boot.lds b/arch/arm/cpu/armv7/zynq/u-boot.lds index f2a5965988..69500a64e2 100644 --- a/arch/arm/cpu/armv7/zynq/u-boot.lds +++ b/arch/arm/cpu/armv7/zynq/u-boot.lds @@ -88,7 +88,7 @@ SECTIONS } /* - * Zynq needs to discard more sections because the user + * Zynq needs to discard these sections because the user * is expected to pass this image on to tools for boot.bin * generation that require them to be dropped. */ diff --git a/arch/arm/cpu/pxa/cpuinfo.c b/arch/arm/cpu/pxa/cpuinfo.c index 9d16079956..17d8be5b5b 100644 --- a/arch/arm/cpu/pxa/cpuinfo.c +++ b/arch/arm/cpu/pxa/cpuinfo.c @@ -11,6 +11,12 @@ #include <errno.h> #include <linux/compiler.h> +#ifdef CONFIG_CPU_PXA25X +#if ((CONFIG_SYS_INIT_SP_ADDR) != 0xfffff800) +#error "Init SP address must be set to 0xfffff800 for PXA250" +#endif +#endif + #define CPU_MASK_PXA_PRODID 0x000003f0 #define CPU_MASK_PXA_REVID 0x0000000f diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index ae0d13ce8f..c77d51e6d8 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -23,54 +23,6 @@ #include <config.h> #include <version.h> -#ifdef CONFIG_CPU_PXA25X -#if ((CONFIG_SYS_INIT_SP_ADDR) != 0xfffff800) -#error "Init SP address must be set to 0xfffff800 for PXA250" -#endif -#endif - -.globl _start -_start: b reset -#ifdef CONFIG_SPL_BUILD - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - ldr pc, _hang - -_hang: - .word do_hang - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 - .word 0x12345678 /* now 16*4=64 */ -#else - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq - -_undefined_instruction: .word undefined_instruction -_software_interrupt: .word software_interrupt -_prefetch_abort: .word prefetch_abort -_data_abort: .word data_abort -_not_used: .word not_used -_irq: .word irq -_fiq: .word fiq -_pad: .word 0x12345678 /* now 16*4=64 */ -#endif /* CONFIG_SPL_BUILD */ -.global _end_vect -_end_vect: - - .balignl 16,0xdeadbeef /* ************************************************************************* * @@ -84,26 +36,7 @@ _end_vect: ************************************************************************* */ -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ + .globl reset reset: /* @@ -174,190 +107,6 @@ cpu_init_crit: mov pc, lr /* back to my caller */ #endif /* !CONFIG_SKIP_LOWLEVEL_INIT || CONFIG_CPU_PXA25X */ -#ifndef CONFIG_SPL_BUILD -/* - ************************************************************************* - * - * Interrupt handling - * - ************************************************************************* - */ -@ -@ IRQ stack frame. -@ -#define S_FRAME_SIZE 72 - -#define S_OLD_R0 68 -#define S_PSR 64 -#define S_PC 60 -#define S_LR 56 -#define S_SP 52 - -#define S_IP 48 -#define S_FP 44 -#define S_R10 40 -#define S_R9 36 -#define S_R8 32 -#define S_R7 28 -#define S_R6 24 -#define S_R5 20 -#define S_R4 16 -#define S_R3 12 -#define S_R2 8 -#define S_R1 4 -#define S_R0 0 - -#define MODE_SVC 0x13 -#define I_BIT 0x80 - -/* - * use bad_save_user_regs for abort/prefetch/undef/swi ... - * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling - */ - - .macro bad_save_user_regs - sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack - stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 - - ldr r2, IRQ_STACK_START_IN @ set base 2 words into abort stack - ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) - add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack - - add r5, sp, #S_SP - mov r1, lr - stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr - mov r0, sp @ save current stack into r0 (param register) - .endm - - .macro irq_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good. - stmdb r8, {sp, lr}^ @ Calling SP, LR - str lr, [r8, #0] @ Save calling PC - mrs r6, spsr - str r6, [r8, #4] @ Save CPSR - str r0, [r8, #8] @ Save OLD_R0 - mov r0, sp - .endm - - .macro irq_restore_user_regs - ldmia sp, {r0 - lr}^ @ Calling r0 - lr - mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC - add sp, sp, #S_FRAME_SIZE - subs pc, lr, #4 @ return & move spsr_svc into cpsr - .endm - - .macro get_bad_stack - ldr r13, IRQ_STACK_START_IN @ setup our mode stack (enter in banked mode) - - str lr, [r13] @ save caller lr in position 0 of saved stack - mrs lr, spsr @ get the spsr - str lr, [r13, #4] @ save spsr in position 1 of saved stack - - mov r13, #MODE_SVC @ prepare SVC-Mode - @ msr spsr_c, r13 - msr spsr, r13 @ switch modes, make sure moves will execute - mov lr, pc @ capture return pc - movs pc, lr @ jump to next instruction & switch modes. - .endm - - .macro get_bad_stack_swi - sub r13, r13, #4 @ space on current stack for scratch reg. - str r0, [r13] @ save R0's value. - ldr r0, IRQ_STACK_START_IN @ get data regions start - str lr, [r0] @ save caller lr in position 0 of saved stack - mrs lr, spsr @ get the spsr - str lr, [r0, #4] @ save spsr in position 1 of saved stack - ldr lr, [r0] @ restore lr - ldr r0, [r13] @ restore r0 - add r13, r13, #4 @ pop stack entry - .endm - - .macro get_irq_stack @ setup IRQ stack - ldr sp, IRQ_STACK_START - .endm - - .macro get_fiq_stack @ setup FIQ stack - ldr sp, FIQ_STACK_START - .endm -#endif /* CONFIG_SPL_BUILD */ - -/* - * exception handlers - */ -#ifdef CONFIG_SPL_BUILD - .align 5 -do_hang: - bl hang /* hang and never return */ -#else /* !CONFIG_SPL_BUILD */ - .align 5 -undefined_instruction: - get_bad_stack - bad_save_user_regs - bl do_undefined_instruction - - .align 5 -software_interrupt: - get_bad_stack_swi - bad_save_user_regs - bl do_software_interrupt - - .align 5 -prefetch_abort: - get_bad_stack - bad_save_user_regs - bl do_prefetch_abort - - .align 5 -data_abort: - get_bad_stack - bad_save_user_regs - bl do_data_abort - - .align 5 -not_used: - get_bad_stack - bad_save_user_regs - bl do_not_used - -#ifdef CONFIG_USE_IRQ - - .align 5 -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -fiq: - get_fiq_stack - /* someone ought to write a more effiction fiq_save_user_regs */ - irq_save_user_regs - bl do_fiq - irq_restore_user_regs - -#else - - .align 5 -irq: - get_bad_stack - bad_save_user_regs - bl do_irq - - .align 5 -fiq: - get_bad_stack - bad_save_user_regs - bl do_fiq - -#endif - .align 5 -#endif /* CONFIG_SPL_BUILD */ - - /* * Enable MMU to use DCache as DRAM. * diff --git a/arch/arm/cpu/sa1100/cpu.c b/arch/arm/cpu/sa1100/cpu.c index 6651898de2..4c9752a1c8 100644 --- a/arch/arm/cpu/sa1100/cpu.c +++ b/arch/arm/cpu/sa1100/cpu.c @@ -17,6 +17,7 @@ #include <common.h> #include <command.h> #include <asm/system.h> +#include <asm/io.h> #ifdef CONFIG_USE_IRQ DECLARE_GLOBAL_DATA_PTR; @@ -52,3 +53,16 @@ static void cache_flush (void) asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i)); } + +#define RST_BASE 0x90030000 +#define RSRR 0x00 +#define RCSR 0x04 + +__attribute__((noreturn)) void reset_cpu(ulong addr __attribute__((unused))) +{ + /* repeat endlessly */ + while (1) { + writel(0, RST_BASE + RCSR); + writel(1, RST_BASE + RSRR); + } +} diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index bf80937a7c..78e0cb8868 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -16,36 +16,6 @@ /* ************************************************************************* * - * Jump vector table as in table 3.1 in [1] - * - ************************************************************************* - */ - - -.globl _start -_start: b reset - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq - -_undefined_instruction: .word undefined_instruction -_software_interrupt: .word software_interrupt -_prefetch_abort: .word prefetch_abort -_data_abort: .word data_abort -_not_used: .word not_used -_irq: .word irq -_fiq: .word fiq - - .balignl 16,0xdeadbeef - - -/* - ************************************************************************* - * * Startup Code (reset vector) * * do important init only if we don't start from memory! @@ -56,26 +26,7 @@ _fiq: .word fiq ************************************************************************* */ -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ + .globl reset reset: /* @@ -173,177 +124,3 @@ cpu_init_crit: mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ mov pc, lr - - -/* - ************************************************************************* - * - * Interrupt handling - * - ************************************************************************* - */ - -@ -@ IRQ stack frame. -@ -#define S_FRAME_SIZE 72 - -#define S_OLD_R0 68 -#define S_PSR 64 -#define S_PC 60 -#define S_LR 56 -#define S_SP 52 - -#define S_IP 48 -#define S_FP 44 -#define S_R10 40 -#define S_R9 36 -#define S_R8 32 -#define S_R7 28 -#define S_R6 24 -#define S_R5 20 -#define S_R4 16 -#define S_R3 12 -#define S_R2 8 -#define S_R1 4 -#define S_R0 0 - -#define MODE_SVC 0x13 -#define I_BIT 0x80 - -/* - * use bad_save_user_regs for abort/prefetch/undef/swi ... - * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling - */ - - .macro bad_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - add r8, sp, #S_PC - - ldr r2, IRQ_STACK_START_IN - ldmia r2, {r2 - r4} @ get pc, cpsr, old_r0 - add r0, sp, #S_FRAME_SIZE @ restore sp_SVC - - add r5, sp, #S_SP - mov r1, lr - stmia r5, {r0 - r4} @ save sp_SVC, lr_SVC, pc, cpsr, old_r - mov r0, sp - .endm - - .macro irq_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - add r8, sp, #S_PC - stmdb r8, {sp, lr}^ @ Calling SP, LR - str lr, [r8, #0] @ Save calling PC - mrs r6, spsr - str r6, [r8, #4] @ Save CPSR - str r0, [r8, #8] @ Save OLD_R0 - mov r0, sp - .endm - - .macro irq_restore_user_regs - ldmia sp, {r0 - lr}^ @ Calling r0 - lr - mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC - add sp, sp, #S_FRAME_SIZE - subs pc, lr, #4 @ return & move spsr_svc into cpsr - .endm - - .macro get_bad_stack - ldr r13, IRQ_STACK_START_IN @ setup our mode stack - - str lr, [r13] @ save caller lr / spsr - mrs lr, spsr - str lr, [r13, #4] - - mov r13, #MODE_SVC @ prepare SVC-Mode - msr spsr_c, r13 - mov lr, pc - movs pc, lr - .endm - - .macro get_irq_stack @ setup IRQ stack - ldr sp, IRQ_STACK_START - .endm - - .macro get_fiq_stack @ setup FIQ stack - ldr sp, FIQ_STACK_START - .endm - -/* - * exception handlers - */ - .align 5 -undefined_instruction: - get_bad_stack - bad_save_user_regs - bl do_undefined_instruction - - .align 5 -software_interrupt: - get_bad_stack - bad_save_user_regs - bl do_software_interrupt - - .align 5 -prefetch_abort: - get_bad_stack - bad_save_user_regs - bl do_prefetch_abort - - .align 5 -data_abort: - get_bad_stack - bad_save_user_regs - bl do_data_abort - - .align 5 -not_used: - get_bad_stack - bad_save_user_regs - bl do_not_used - -#ifdef CONFIG_USE_IRQ - - .align 5 -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -fiq: - get_fiq_stack - /* someone ought to write a more effiction fiq_save_user_regs */ - irq_save_user_regs - bl do_fiq - irq_restore_user_regs - -#else - - .align 5 -irq: - get_bad_stack - bad_save_user_regs - bl do_irq - - .align 5 -fiq: - get_bad_stack - bad_save_user_regs - bl do_fiq - -#endif - - .align 5 -.globl reset_cpu -reset_cpu: - ldr r0, RST_BASE - mov r1, #0x0 @ set bit 3-0 ... - str r1, [r0, #RCSR] @ ... to clear in RCSR - mov r1, #0x1 - str r1, [r0, #RSRR] @ and perform reset - b reset_cpu @ silly, but repeat endlessly diff --git a/arch/arm/cpu/tegra20-common/crypto.c b/arch/arm/cpu/tegra20-common/crypto.c index 8209f7661a..ec95d7ceb1 100644 --- a/arch/arm/cpu/tegra20-common/crypto.c +++ b/arch/arm/cpu/tegra20-common/crypto.c @@ -19,74 +19,6 @@ enum security_op { SECURITY_ENCRYPT = 1 << 1, /* Encrypt the data */ }; -static void debug_print_vector(char *name, u32 num_bytes, u8 *data) -{ - u32 i; - - debug("%s [%d] @0x%08x", name, num_bytes, (u32)data); - for (i = 0; i < num_bytes; i++) { - if (i % 16 == 0) - debug(" = "); - debug("%02x", data[i]); - if ((i+1) % 16 != 0) - debug(" "); - } - debug("\n"); -} - -/** - * Apply chain data to the destination using EOR - * - * Each array is of length AES_AES_KEY_LENGTH. - * - * \param cbc_chain_data Chain data - * \param src Source data - * \param dst Destination data, which is modified here - */ -static void apply_cbc_chain_data(u8 *cbc_chain_data, u8 *src, u8 *dst) -{ - int i; - - for (i = 0; i < 16; i++) - *dst++ = *src++ ^ *cbc_chain_data++; -} - -/** - * Encrypt some data with AES. - * - * \param key_schedule Expanded key to use - * \param src Source data to encrypt - * \param dst Destination buffer - * \param num_aes_blocks Number of AES blocks to encrypt - */ -static void encrypt_object(u8 *key_schedule, u8 *src, u8 *dst, - u32 num_aes_blocks) -{ - u8 tmp_data[AES_KEY_LENGTH]; - u8 *cbc_chain_data; - u32 i; - - cbc_chain_data = zero_key; /* Convenient array of 0's for IV */ - - for (i = 0; i < num_aes_blocks; i++) { - debug("encrypt_object: block %d of %d\n", i, num_aes_blocks); - debug_print_vector("AES Src", AES_KEY_LENGTH, src); - - /* Apply the chain data */ - apply_cbc_chain_data(cbc_chain_data, src, tmp_data); - debug_print_vector("AES Xor", AES_KEY_LENGTH, tmp_data); - - /* encrypt the AES block */ - aes_encrypt(tmp_data, key_schedule, dst); - debug_print_vector("AES Dst", AES_KEY_LENGTH, dst); - - /* Update pointers for next loop. */ - cbc_chain_data = dst; - src += AES_KEY_LENGTH; - dst += AES_KEY_LENGTH; - } -} - /** * Shift a vector left by one bit * @@ -129,39 +61,31 @@ static void sign_object(u8 *key, u8 *key_schedule, u8 *src, u8 *dst, for (i = 0; i < AES_KEY_LENGTH; i++) tmp_data[i] = 0; - encrypt_object(key_schedule, tmp_data, left, 1); - debug_print_vector("AES(key, nonce)", AES_KEY_LENGTH, left); + aes_cbc_encrypt_blocks(key_schedule, tmp_data, left, 1); left_shift_vector(left, k1, sizeof(left)); - debug_print_vector("L", AES_KEY_LENGTH, left); if ((left[0] >> 7) != 0) /* get MSB of L */ k1[AES_KEY_LENGTH-1] ^= AES_CMAC_CONST_RB; - debug_print_vector("K1", AES_KEY_LENGTH, k1); /* compute the AES-CMAC value */ for (i = 0; i < num_aes_blocks; i++) { /* Apply the chain data */ - apply_cbc_chain_data(cbc_chain_data, src, tmp_data); + aes_apply_cbc_chain_data(cbc_chain_data, src, tmp_data); /* for the final block, XOR K1 into the IV */ if (i == num_aes_blocks - 1) - apply_cbc_chain_data(tmp_data, k1, tmp_data); + aes_apply_cbc_chain_data(tmp_data, k1, tmp_data); /* encrypt the AES block */ aes_encrypt(tmp_data, key_schedule, dst); debug("sign_obj: block %d of %d\n", i, num_aes_blocks); - debug_print_vector("AES-CMAC Src", AES_KEY_LENGTH, src); - debug_print_vector("AES-CMAC Xor", AES_KEY_LENGTH, tmp_data); - debug_print_vector("AES-CMAC Dst", AES_KEY_LENGTH, dst); /* Update pointers for next loop. */ cbc_chain_data = dst; src += AES_KEY_LENGTH; } - - debug_print_vector("AES-CMAC Hash", AES_KEY_LENGTH, dst); } /** @@ -180,7 +104,6 @@ static int encrypt_and_sign(u8 *key, enum security_op oper, u8 *src, u8 key_schedule[AES_EXPAND_KEY_LENGTH]; debug("encrypt_and_sign: length = %d\n", length); - debug_print_vector("AES key", AES_KEY_LENGTH, key); /* * The only need for a key is for signing/checksum purposes, so @@ -193,7 +116,7 @@ static int encrypt_and_sign(u8 *key, enum security_op oper, u8 *src, if (oper & SECURITY_ENCRYPT) { /* Perform this in place, resulting in src being encrypted. */ debug("encrypt_and_sign: begin encryption\n"); - encrypt_object(key_schedule, src, src, num_aes_blocks); + aes_cbc_encrypt_blocks(key_schedule, src, src, num_aes_blocks); debug("encrypt_and_sign: end encryption\n"); } diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds index 3e886680e8..4beddf08e7 100644 --- a/arch/arm/cpu/u-boot-spl.lds +++ b/arch/arm/cpu/u-boot-spl.lds @@ -18,6 +18,7 @@ SECTIONS .text : { __image_copy_start = .; + *(.vectors) CPUDIR/start.o (.text*) *(.text*) } diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index 33c1f99fc0..a7728e0a2d 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -18,6 +18,7 @@ SECTIONS .text : { *(.__image_copy_start) + *(.vectors) CPUDIR/start.o (.text*) *(.text*) } diff --git a/arch/arm/include/asm/arch-rmobile/ehci-rmobile.h b/arch/arm/include/asm/arch-rmobile/ehci-rmobile.h new file mode 100644 index 0000000000..463654efd3 --- /dev/null +++ b/arch/arm/include/asm/arch-rmobile/ehci-rmobile.h @@ -0,0 +1,147 @@ +/* + * Copyright (C) 2013,2014 Renesas Electronics Corporation + * Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef __EHCI_RMOBILE_H__ +#define __EHCI_RMOBILE_H__ + +/* Register offset */ +#define OHCI_OFFSET 0x00 +#define OHCI_SIZE 0x1000 +#define EHCI_OFFSET 0x1000 +#define EHCI_SIZE 0x1000 + +#define EHCI_USBCMD (EHCI_OFFSET + 0x0020) + +/* USBCTR */ +#define DIRPD (1 << 8) +#define PLL_RST (1 << 2) +#define PCICLK_MASK (1 << 1) +#define USBH_RST (1 << 0) + +/* CMND_STS */ +#define SERREN (1 << 8) +#define PERREN (1 << 6) +#define MASTEREN (1 << 2) +#define MEMEN (1 << 1) + +/* PCIAHB_WIN1_CTR and PCIAHB_WIN2_CTR */ +#define PCIAHB_WIN_PREFETCH ((1 << 1)|(1 << 0)) + +/* AHBPCI_WIN1_CTR */ +#define PCIWIN1_PCICMD ((1 << 3)|(1 << 1)) +#define AHB_CFG_AHBPCI 0x40000000 +#define AHB_CFG_HOST 0x80000000 + +/* AHBPCI_WIN2_CTR */ +#define PCIWIN2_PCICMD ((1 << 2)|(1 << 1)) + +/* PCI_INT_ENABLE */ +#define USBH_PMEEN (1 << 19) +#define USBH_INTBEN (1 << 17) +#define USBH_INTAEN (1 << 16) + +/* AHB_BUS_CTR */ +#define SMODE_READY_CTR (1 << 17) +#define SMODE_READ_BURST (1 << 16) +#define MMODE_HBUSREQ (1 << 7) +#define MMODE_BOUNDARY ((1 << 6)|(1 << 5)) +#define MMODE_BURST_WIDTH ((1 << 4)|(1 << 3)) +#define MMODE_SINGLE_MODE ((1 << 4)|(1 << 3)) +#define MMODE_WR_INCR (1 << 2) +#define MMODE_BYTE_BURST (1 << 1) +#define MMODE_HTRANS (1 << 0) + +/* PCI_ARBITER_CTR */ +#define PCIBUS_PARK_TIMER 0x00FF0000 +#define PCIBUS_PARK_TIMER_SET 0x00070000 +#define PCIBP_MODE (1 << 12) +#define PCIREQ7 (1 << 7) +#define PCIREQ6 (1 << 6) +#define PCIREQ5 (1 << 5) +#define PCIREQ4 (1 << 4) +#define PCIREQ3 (1 << 3) +#define PCIREQ2 (1 << 2) +#define PCIREQ1 (1 << 1) +#define PCIREQ0 (1 << 0) + +#define SMSTPCR7 0xE615014C +#define SMSTPCR703 (1 << 3) + +/* Init AHB master and slave functions of the host logic */ +#define AHB_BUS_CTR_INIT \ + (SMODE_READY_CTR | MMODE_HBUSREQ | MMODE_WR_INCR | \ + MMODE_BYTE_BURST | MMODE_HTRANS) + +#define USBCTR_WIN_SIZE_1GB 0x800 + +/* PCI Configuration Registers */ +#define PCI_CONF_OHCI_OFFSET 0x10000 +#define PCI_CONF_EHCI_OFFSET 0x10100 +struct ahb_pciconf { + u32 vid_did; + u32 cmnd_sts; + u32 rev; + u32 cache_line; + u32 basead; +}; + +/* PCI Configuration Registers for AHB-PCI Bridge Registers */ +#define PCI_CONF_AHBPCI_OFFSET 0x10000 +struct ahbconf_pci_bridge { + u32 vid_did; /* 0x00 */ + u32 cmnd_sts; + u32 revid_cc; + u32 cls_lt_ht_bist; + u32 basead; /* 0x10 */ + u32 win1_basead; + u32 win2_basead; + u32 dummy0[5]; + u32 ssvdi_ssid; /* 0x2C */ + u32 dummy1[4]; + u32 intr_line_pin; +}; + +/* AHB-PCI Bridge PCI Communication Registers */ +#define AHBPCI_OFFSET 0x10800 +struct ahbcom_pci_bridge { + u32 pciahb_win1_ctr; /* 0x00 */ + u32 pciahb_win2_ctr; + u32 pciahb_dct_ctr; + u32 dummy0; + u32 ahbpci_win1_ctr; /* 0x10 */ + u32 ahbpci_win2_ctr; + u32 dummy1; + u32 ahbpci_dct_ctr; + u32 pci_int_enable; /* 0x20 */ + u32 pci_int_status; + u32 dummy2[2]; + u32 ahb_bus_ctr; /* 0x30 */ + u32 usbctr; + u32 dummy3[2]; + u32 pci_arbiter_ctr; /* 0x40 */ + u32 dummy4; + u32 pci_unit_rev; /* 0x48 */ +}; + +struct rmobile_ehci_reg { + u32 hciversion; /* hciversion/caplength */ + u32 hcsparams; /* hcsparams */ + u32 hccparams; /* hccparams */ + u32 hcsp_portroute; /* hcsp_portroute */ + u32 usbcmd; /* usbcmd */ + u32 usbsts; /* usbsts */ + u32 usbintr; /* usbintr */ + u32 frindex; /* frindex */ + u32 ctrldssegment; /* ctrldssegment */ + u32 periodiclistbase; /* periodiclistbase */ + u32 asynclistaddr; /* asynclistaddr */ + u32 dummy[9]; + u32 configflag; /* configflag */ + u32 portsc; /* portsc */ +}; + +#endif /* __EHCI_RMOBILE_H__ */ diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index e035d6acc0..585f1f781b 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -11,7 +11,7 @@ lib-$(CONFIG_USE_PRIVATE_LIBGCC) += _ashldi3.o _ashrdi3.o _divsi3.o \ ifdef CONFIG_ARM64 obj-y += crt0_64.o else -obj-y += crt0.o +obj-y += vectors.o crt0.o endif ifndef CONFIG_SPL_BUILD diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c index 6cc136aa3c..4f6b9f01cb 100644 --- a/arch/arm/lib/cache.c +++ b/arch/arm/lib/cache.c @@ -12,16 +12,23 @@ void __flush_cache(unsigned long start, unsigned long size) { #if defined(CONFIG_ARM1136) - void arm1136_cache_flush(void); - arm1136_cache_flush(); +#if !defined(CONFIG_SYS_ICACHE_OFF) + asm("mcr p15, 0, r1, c7, c5, 0"); /* invalidate I cache */ #endif + +#if !defined(CONFIG_SYS_DCACHE_OFF) + asm("mcr p15, 0, r1, c7, c14, 0"); /* Clean+invalidate D cache */ +#endif + +#endif /* CONFIG_ARM1136 */ + #ifdef CONFIG_ARM926EJS /* test and clean, page 2-23 of arm926ejs manual */ asm("0: mrc p15, 0, r15, c7, c10, 3\n\t" "bne 0b\n" : : : "memory"); /* disable write buffer as well (page 2-22) */ asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0)); -#endif +#endif /* CONFIG_ARM926EJS */ return; } void flush_cache(unsigned long start, unsigned long size) diff --git a/arch/arm/lib/vectors.S b/arch/arm/lib/vectors.S new file mode 100644 index 0000000000..d68cc477dc --- /dev/null +++ b/arch/arm/lib/vectors.S @@ -0,0 +1,291 @@ +/* + * vectors - Generic ARM exception table code + * + * Copyright (c) 1998 Dan Malek <dmalek@jlc.net> + * Copyright (c) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> + * Copyright (c) 2000 Wolfgang Denk <wd@denx.de> + * Copyright (c) 2001 Alex Züpke <azu@sysgo.de> + * Copyright (c) 2001 Marius Gröger <mag@sysgo.de> + * Copyright (c) 2002 Alex Züpke <azu@sysgo.de> + * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> + * Copyright (c) 2002 Kyle Harris <kharris@nexus-tech.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + ************************************************************************* + * + * Symbol _start is referenced elsewhere, so make it global + * + ************************************************************************* + */ + +.globl _start + +/* + ************************************************************************* + * + * Vectors have their own section so linker script can map them easily + * + ************************************************************************* + */ + + .section ".vectors", "x" + +/* + ************************************************************************* + * + * Exception vectors as described in ARM reference manuals + * + * Uses indirect branch to allow reaching handlers anywhere in memory. + * + ************************************************************************* + */ + +_start: + +#ifdef CONFIG_SYS_DV_NOR_BOOT_CFG + .word CONFIG_SYS_DV_NOR_BOOT_CFG +#endif + +_start: + ldr pc, _reset + ldr pc, _undefined_instruction + ldr pc, _software_interrupt + ldr pc, _prefetch_abort + ldr pc, _data_abort + ldr pc, _not_used + ldr pc, _irq + ldr pc, _fiq + +/* + ************************************************************************* + * + * Indirect vectors table + * + * Symbols referenced here must be defined somewhere else + * + ************************************************************************* + */ + + .globl _undefined_instruction + .globl _software_interrupt + .globl _prefetch_abort + .globl _data_abort + .globl _not_used + .globl _irq + .globl _fiq + +_reset: .word reset +_undefined_instruction: .word undefined_instruction +_software_interrupt: .word software_interrupt +_prefetch_abort: .word prefetch_abort +_data_abort: .word data_abort +_not_used: .word not_used +_irq: .word irq +_fiq: .word fiq + + .balignl 16,0xdeadbeef + +/* + ************************************************************************* + * + * Interrupt handling + * + ************************************************************************* + */ + +/* SPL interrupt handling: just hang */ + +#ifdef CONFIG_SPL_BUILD + + .align 5 +undefined_instruction: +software_interrupt: +prefetch_abort: +data_abort: +not_used: +irq: +fiq: + +1: + bl 1b /* hang and never return */ + +#else /* !CONFIG_SPL_BUILD */ + +/* IRQ stack memory (calculated at run-time) + 8 bytes */ +.globl IRQ_STACK_START_IN +IRQ_STACK_START_IN: + .word 0x0badc0de + +#ifdef CONFIG_USE_IRQ +/* IRQ stack memory (calculated at run-time) */ +.globl IRQ_STACK_START +IRQ_STACK_START: + .word 0x0badc0de + +/* IRQ stack memory (calculated at run-time) */ +.globl FIQ_STACK_START +FIQ_STACK_START: + .word 0x0badc0de + +#endif /* CONFIG_USE_IRQ */ + +@ +@ IRQ stack frame. +@ +#define S_FRAME_SIZE 72 + +#define S_OLD_R0 68 +#define S_PSR 64 +#define S_PC 60 +#define S_LR 56 +#define S_SP 52 + +#define S_IP 48 +#define S_FP 44 +#define S_R10 40 +#define S_R9 36 +#define S_R8 32 +#define S_R7 28 +#define S_R6 24 +#define S_R5 20 +#define S_R4 16 +#define S_R3 12 +#define S_R2 8 +#define S_R1 4 +#define S_R0 0 + +#define MODE_SVC 0x13 +#define I_BIT 0x80 + +/* + * use bad_save_user_regs for abort/prefetch/undef/swi ... + * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling + */ + + .macro bad_save_user_regs + @ carve out a frame on current user stack + sub sp, sp, #S_FRAME_SIZE + stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 + ldr r2, IRQ_STACK_START_IN + @ get values for "aborted" pc and cpsr (into parm regs) + ldmia r2, {r2 - r3} + add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack + add r5, sp, #S_SP + mov r1, lr + stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr + mov r0, sp @ save current stack into r0 (param register) + .endm + + .macro irq_save_user_regs + sub sp, sp, #S_FRAME_SIZE + stmia sp, {r0 - r12} @ Calling r0-r12 + @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good. + add r8, sp, #S_PC + stmdb r8, {sp, lr}^ @ Calling SP, LR + str lr, [r8, #0] @ Save calling PC + mrs r6, spsr + str r6, [r8, #4] @ Save CPSR + str r0, [r8, #8] @ Save OLD_R0 + mov r0, sp + .endm + + .macro irq_restore_user_regs + ldmia sp, {r0 - lr}^ @ Calling r0 - lr + mov r0, r0 + ldr lr, [sp, #S_PC] @ Get PC + add sp, sp, #S_FRAME_SIZE + subs pc, lr, #4 @ return & move spsr_svc into cpsr + .endm + + .macro get_bad_stack + ldr r13, IRQ_STACK_START_IN @ setup our mode stack + + str lr, [r13] @ save caller lr in position 0 of saved stack + mrs lr, spsr @ get the spsr + str lr, [r13, #4] @ save spsr in position 1 of saved stack + mov r13, #MODE_SVC @ prepare SVC-Mode + @ msr spsr_c, r13 + msr spsr, r13 @ switch modes, make sure moves will execute + mov lr, pc @ capture return pc + movs pc, lr @ jump to next instruction & switch modes. + .endm + + .macro get_irq_stack @ setup IRQ stack + ldr sp, IRQ_STACK_START + .endm + + .macro get_fiq_stack @ setup FIQ stack + ldr sp, FIQ_STACK_START + .endm + +/* + * exception handlers + */ + + .align 5 +undefined_instruction: + get_bad_stack + bad_save_user_regs + bl do_undefined_instruction + + .align 5 +software_interrupt: + get_bad_stack + bad_save_user_regs + bl do_software_interrupt + + .align 5 +prefetch_abort: + get_bad_stack + bad_save_user_regs + bl do_prefetch_abort + + .align 5 +data_abort: + get_bad_stack + bad_save_user_regs + bl do_data_abort + + .align 5 +not_used: + get_bad_stack + bad_save_user_regs + bl do_not_used + +#ifdef CONFIG_USE_IRQ + + .align 5 +irq: + get_irq_stack + irq_save_user_regs + bl do_irq + irq_restore_user_regs + + .align 5 +fiq: + get_fiq_stack + /* someone ought to write a more effiction fiq_save_user_regs */ + irq_save_user_regs + bl do_fiq + irq_restore_user_regs + +#else + + .align 5 +irq: + get_bad_stack + bad_save_user_regs + bl do_irq + + .align 5 +fiq: + get_bad_stack + bad_save_user_regs + bl do_fiq + +#endif /* CONFIG_USE_IRQ */ + +#endif /* CONFIG_SPL_BUILD */ |
