diff options
Diffstat (limited to 'arch/arm')
39 files changed, 441 insertions, 83 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 22eb2d5854..79ccc06d5c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -950,4 +950,6 @@ source "board/woodburn/Kconfig" source "board/xaeniax/Kconfig" source "board/zipitz2/Kconfig" +source "arch/arm/Kconfig.debug" + endmenu diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug new file mode 100644 index 0000000000..624bcf4682 --- /dev/null +++ b/arch/arm/Kconfig.debug @@ -0,0 +1,64 @@ +menu "ARM debug" + +config DEBUG_LL + bool "Low-level debugging functions" + depends on !ARM64 + help + Say Y here to include definitions of printascii, printch, printhex + in U-Boot. This is helpful if you are debugging code that + executes before the console is initialized. + +choice + prompt "Low-level debugging port" + depends on DEBUG_LL + + config DEBUG_LL_UART_8250 + bool "Low-level debugging via 8250 UART" + help + Say Y here if you wish the debug print routes to direct + their output to an 8250 UART. You can use this option + to provide the parameters for the 8250 UART rather than + selecting one of the platform specific options above if + you know the parameters for the port. + + This option is preferred over the platform specific + options; the platform specific options are deprecated + and will be soon removed. + +endchoice + +config DEBUG_LL_INCLUDE + string + depends on DEBUG_LL + default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 + default "mach/debug-macro.S" + +# Compatibility options for 8250 +config DEBUG_UART_8250 + bool + +config DEBUG_UART_PHYS + hex "Physical base address of debug UART" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + +# This is not used in U-Boot +config DEBUG_UART_VIRT + hex + default DEBUG_UART_PHYS + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + +config DEBUG_UART_8250_SHIFT + int "Register offset shift for the 8250 debug UART" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + default 2 + +config DEBUG_UART_8250_WORD + bool "Use 32-bit accesses for 8250 UART" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + depends on DEBUG_UART_8250_SHIFT >= 2 + +config DEBUG_UART_8250_FLOW_CONTROL + bool "Enable flow control for 8250 UART" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + +endmenu diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c index 365542fe0b..ef130aea42 100644 --- a/arch/arm/cpu/arm926ejs/mxs/mxs.c +++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c @@ -83,7 +83,9 @@ void mx28_fixup_vt(uint32_t start_addr) int i; for (i = 0; i < 8; i++) { + /* cppcheck-suppress nullPointer */ vt[i] = ldr_pc; + /* cppcheck-suppress nullPointer */ vt[i + 8] = start_addr + (4 * i); } } diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index d3e136991a..d29b9aaf3d 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -118,6 +118,8 @@ static void mxs_spl_fixup_vectors(void) * fine. */ extern uint32_t _start; + + /* cppcheck-suppress nullPointer */ memcpy(0x0, &_start, 0x60); } diff --git a/arch/arm/cpu/arm926ejs/mxs/timer.c b/arch/arm/cpu/arm926ejs/mxs/timer.c index 99d3fb8731..f2e72257d1 100644 --- a/arch/arm/cpu/arm926ejs/mxs/timer.c +++ b/arch/arm/cpu/arm926ejs/mxs/timer.c @@ -91,6 +91,8 @@ unsigned long long get_ticks(void) TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET; #elif defined(CONFIG_MX28) now = readl(&timrot_regs->hw_timrot_running_count0); +#else +#error "Don't know how to read timrot_regs" #endif if (lastdec >= now) { diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c index 2ce682f6b1..781d83fc72 100644 --- a/arch/arm/cpu/armv7/am33xx/sys_info.c +++ b/arch/arm/cpu/armv7/am33xx/sys_info.c @@ -18,6 +18,7 @@ #include <asm/arch/cpu.h> #include <asm/arch/clock.h> #include <power/tps65910.h> +#include <linux/compiler.h> struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE; @@ -51,11 +52,11 @@ u32 get_cpu_type(void) /** * get_board_rev() - setup to pass kernel board revision information - * returns:(bit[0-3] sub version, higher bit[7-4] is higher version) + * returns: 0 for the ATAG REVISION tag value. */ -u32 get_board_rev(void) +u32 __weak get_board_rev(void) { - return BOARD_REV_ID; + return 0; } /** diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig index c215404469..a029379a4f 100644 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -22,6 +22,9 @@ config TARGET_CM_T35 bool "CompuLab CM-T3530 and CM-T3730 boards" select SUPPORT_SPL +config TARGET_CM_T3517 + bool "CompuLab CM-T3517 boards" + config TARGET_DEVKIT8000 bool "TimLL OMAP3 Devkit8000" select SUPPORT_SPL @@ -98,6 +101,7 @@ source "board/teejet/mt_ventoux/Kconfig" source "board/ti/sdp3430/Kconfig" source "board/ti/beagle/Kconfig" source "board/compulab/cm_t35/Kconfig" +source "board/compulab/cm_t3517/Kconfig" source "board/timll/devkit8000/Kconfig" source "board/ti/evm/Kconfig" source "board/isee/igep00x0/Kconfig" diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig index f013dc3cad..36b7f11fbe 100644 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -32,4 +32,31 @@ config CMD_PINMON The boot mode pins are latched when the system reset is deasserted and determine which device the system should load a boot image from. +config SOC_INIT + bool + default SPL_BUILD + +config DRAM_INIT + bool + default SPL_BUILD + +choice + prompt "DDR3 Frequency select" + depends on DRAM_INIT + +config DDR_FREQ_1600 + bool "DDR3 1600" + depends on MACH_PH1_PRO4 || MACH_PH1_LD4 + +config DDR_FREQ_1333 + bool "DDR3 1333" + depends on MACH_PH1_LD4 || MACH_PH1_SLD8 + +endchoice + +config DDR_FREQ + int + default 1333 if DDR_FREQ_1333 + default 1600 if DDR_FREQ_1600 + endmenu diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile index dd57469d9c..0f64d2591c 100644 --- a/arch/arm/cpu/armv7/uniphier/Makefile +++ b/arch/arm/cpu/armv7/uniphier/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_SPL_BUILD) += spl.o obj-y += timer.o obj-y += reset.o obj-y += cache_uniphier.o +obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o obj-y += dram_init.o obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/board_postclk_init.c b/arch/arm/cpu/armv7/uniphier/board_postclk_init.c index 4302277dfc..89e44bb95b 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/board_postclk_init.c +++ b/arch/arm/cpu/armv7/uniphier/board_postclk_init.c @@ -5,11 +5,13 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <common.h> +#include <linux/compiler.h> #include <asm/arch/led.h> #include <asm/arch/board.h> -void bcu_init(void); +void __weak bcu_init(void) +{ +}; void sbc_init(void); void sg_init(void); void pll_init(void); @@ -18,12 +20,15 @@ void clkrst_init(void); int board_postclk_init(void) { +#ifdef CONFIG_SOC_INIT bcu_init(); sbc_init(); sg_init(); + uniphier_board_reset(); + pll_init(); uniphier_board_init(); @@ -33,7 +38,7 @@ int board_postclk_init(void) clkrst_init(); led_write(B, 2, , ); - +#endif pin_init(); led_write(B, 3, , ); diff --git a/arch/arm/cpu/armv7/uniphier/dram_init.c b/arch/arm/cpu/armv7/uniphier/dram_init.c index 5465a0e6bf..7de657b7af 100644 --- a/arch/arm/cpu/armv7/uniphier/dram_init.c +++ b/arch/arm/cpu/armv7/uniphier/dram_init.c @@ -16,7 +16,7 @@ int dram_init(void) DECLARE_GLOBAL_DATA_PTR; gd->ram_size = CONFIG_SYS_SDRAM_SIZE; -#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) +#ifdef CONFIG_DRAM_INIT led_write(B, 4, , ); { diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile index 781b511a97..fba1cc7498 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-y += platdevice.o obj-y += boot-mode.o -obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \ - sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o -obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \ - umc_init.o +obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ + clkrst_init.o +obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o +obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c index 0047223181..62f5b0148d 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c @@ -13,3 +13,16 @@ SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) + +/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ +struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { + { + .base = 0x5a800100, + }, + { + .base = 0x5a810100, + }, + { + .base = 0x5a820100, + }, +}; diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c index 1344ac1caa..ebcbaabf65 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c @@ -149,10 +149,6 @@ int umc_init(void) CONFIG_SDRAM1_SIZE / 0x08000000); } -#if CONFIG_DDR_FREQ != 1333 && CONFIG_DDR_FREQ != 1600 -#error Unsupported DDR Frequency. -#endif - #if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile index e11f4f6d8b..74129bc86a 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-y += platdevice.o obj-y += boot-mode.o -obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o sbc_init.o \ - sg_init.o pll_init.o clkrst_init.o pinctrl.o -obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \ - umc_init.o +obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o +obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o +obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c deleted file mode 100644 index 7198829988..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/led.h> -#include <asm/arch/board.h> - -void sbc_init(void); -void sg_init(void); -void pll_init(void); -void pin_init(void); -void clkrst_init(void); - -int board_postclk_init(void) -{ - sbc_init(); - - sg_init(); - - pll_init(); - - uniphier_board_init(); - - led_write(B, 1, , ); - - clkrst_init(); - - led_write(B, 2, , ); - - pin_init(); - - led_write(B, 3, , ); - - return 0; -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c index 503c247d6b..4e3d47615b 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c @@ -41,5 +41,12 @@ void pin_init(void) sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */ #endif +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */ + sg_set_pinsel(187, 0); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(188, 0); /* USB3OD -> USB3OD */ +#endif + writel(1, SG_LOADPINCTRL); } diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c index 6da921e920..1843d0469f 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c @@ -13,3 +13,13 @@ SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) + +/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ +struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { + { + .base = 0x5a800100, + }, + { + .base = 0x5a810100, + }, +}; diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c index dd462875bb..328b2f4d9a 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c @@ -122,10 +122,6 @@ int umc_init(void) CONFIG_SDRAM1_SIZE / 0x08000000); } -#if CONFIG_DDR_FREQ != 1600 -#error Unsupported DDR frequency. -#endif - #if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \ (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \ ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \ diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile index 781b511a97..fba1cc7498 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-y += platdevice.o obj-y += boot-mode.o -obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \ - sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o -obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \ - umc_init.o +obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ + clkrst_init.o +obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o +obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_postclk_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_postclk_init.c deleted file mode 100644 index 287b33c21d..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_postclk_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/board_postclk_init.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c index 59d054a310..72ec599f69 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c @@ -13,3 +13,16 @@ SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) + +/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ +struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { + { + .base = 0x5a800100, + }, + { + .base = 0x5a810100, + }, + { + .base = 0x5a820100, + }, +}; diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c index ff2dcb1640..a44f999fbf 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c @@ -129,10 +129,6 @@ int umc_init(void) CONFIG_SDRAM1_SIZE / 0x08000000); } -#if CONFIG_DDR_FREQ != 1333 -#error Unsupported DDR frequency. -#endif - #if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 diff --git a/arch/arm/cpu/armv7/uniphier/reset.c b/arch/arm/cpu/armv7/uniphier/reset.c index b0dc9673b4..50d1fed647 100644 --- a/arch/arm/cpu/armv7/uniphier/reset.c +++ b/arch/arm/cpu/armv7/uniphier/reset.c @@ -8,14 +8,11 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/sc-regs.h> -#include <asm/arch/board.h> void reset_cpu(unsigned long ignored) { u32 tmp; - uniphier_board_reset(); - writel(5, SC_IRQTIMSET); /* default value */ tmp = readl(SC_SLFRSTSEL); diff --git a/arch/arm/cpu/armv7/zynq/ddrc.c b/arch/arm/cpu/armv7/zynq/ddrc.c index 1ea086d520..d74f8dbbc4 100644 --- a/arch/arm/cpu/armv7/zynq/ddrc.c +++ b/arch/arm/cpu/armv7/zynq/ddrc.c @@ -40,6 +40,7 @@ void zynq_ddrc_init(void) * first stage bootloader. To get ECC to work all memory has * been initialized by writing any value. */ + /* cppcheck-suppress nullPointer */ memset((void *)0, 0, 1 * 1024 * 1024); } else { puts("ECC disabled "); diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 33a82fca98..7eacf27a93 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -14,8 +14,6 @@ #include <asm/ti-common/sys_proto.h> #include <asm/arch/cpu.h> -#define BOARD_REV_ID 0x0 - u32 get_cpu_rev(void); u32 get_sysboot_value(void); diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2e.h b/arch/arm/include/asm/arch-keystone/hardware-k2e.h index 9512756619..df499957e5 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2e.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2e.h @@ -57,8 +57,6 @@ #define KS2_NETCP_PDMA_SCHED_BASE 0x24186100 #define KS2_NETCP_PDMA_RX_FLOW_BASE 0x24189000 #define KS2_NETCP_PDMA_RX_FLOW_NUM 96 -#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001 -#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002 #define KS2_NETCP_PDMA_TX_SND_QUEUE 896 /* NETCP */ diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h index 5a9ea4fbca..195c0d3003 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h @@ -98,8 +98,6 @@ #define KS2_NETCP_PDMA_SCHED_BASE 0x02004c00 #define KS2_NETCP_PDMA_RX_FLOW_BASE 0x02005000 #define KS2_NETCP_PDMA_RX_FLOW_NUM 32 -#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001 -#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002 #define KS2_NETCP_PDMA_TX_SND_QUEUE 648 /* NETCP */ diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2l.h b/arch/arm/include/asm/arch-keystone/hardware-k2l.h index 05532ada70..4f1197ea92 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2l.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2l.h @@ -84,6 +84,10 @@ /* OSR memory size */ #define KS2_OSR_SIZE 0x100000 +/* SGMII SerDes */ +#define KS2_SGMII_SERDES2_BASE 0x02320000 +#define KS2_LANES_PER_SGMII_SERDES 2 + /* Number of DSP cores */ #define KS2_NUM_DSPS 4 @@ -98,4 +102,7 @@ #define KS2_NETCP_PDMA_RX_FLOW_NUM 96 #define KS2_NETCP_PDMA_TX_SND_QUEUE 896 +/* NETCP */ +#define KS2_NETCP_BASE 0x26000000 + #endif /* __ASM_ARCH_HARDWARE_K2L_H */ diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h index c6a54d8b91..be22bdb1ca 100644 --- a/arch/arm/include/asm/arch-keystone/hardware.h +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -122,6 +122,10 @@ typedef volatile unsigned int *dv_reg_p; #define KS2_EDMA_QEESR 0x108c #define KS2_EDMA_PARAM_1(x) (0x4020 + (4 * x)) +/* NETCP pktdma */ +#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001 +#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002 + /* Chip Interrupt Controller */ #define KS2_CIC2_BASE 0x02608000 diff --git a/arch/arm/include/asm/arch-uniphier/ehci-uniphier.h b/arch/arm/include/asm/arch-uniphier/ehci-uniphier.h new file mode 100644 index 0000000000..e9c5fb4af8 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/ehci-uniphier.h @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PLAT_UNIPHIER_EHCI_H +#define __PLAT_UNIPHIER_EHCI_H + +#include <linux/types.h> +#include <asm/io.h> +#include "mio-regs.h" + +struct uniphier_ehci_platform_data { + unsigned long base; +}; + +extern struct uniphier_ehci_platform_data uniphier_ehci_platdata[]; + +static inline void uniphier_ehci_reset(int index, int on) +{ + u32 tmp; + + tmp = readl(MIO_USB_RSTCTRL(index)); + if (on) + tmp &= ~MIO_USB_RSTCTRL_XRST; + else + tmp |= MIO_USB_RSTCTRL_XRST; + writel(tmp, MIO_USB_RSTCTRL(index)); +} + +#endif /* __PLAT_UNIPHIER_EHCI_H */ diff --git a/arch/arm/include/asm/arch-uniphier/mio-regs.h b/arch/arm/include/asm/arch-uniphier/mio-regs.h new file mode 100644 index 0000000000..3306934ff7 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/mio-regs.h @@ -0,0 +1,20 @@ +/* + * UniPhier MIO (Media I/O) registers + * + * Copyright (C) 2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_MIO_REGS_H +#define ARCH_MIO_REGS_H + +#define MIO_BASE 0x59810000 + +#define MIO_CLKCTRL(i) (MIO_BASE + 0x200 * (i) + 0x0020) +#define MIO_RSTCTRL(i) (MIO_BASE + 0x200 * (i) + 0x0110) +#define MIO_USB_RSTCTRL(i) (MIO_BASE + 0x200 * (i) + 0x0114) + +#define MIO_USB_RSTCTRL_XRST (0x1 << 0) + +#endif /* ARCH_MIO_REGS_H */ diff --git a/arch/arm/include/asm/arch-uniphier/platdevice.h b/arch/arm/include/asm/arch-uniphier/platdevice.h index cdf7d132d4..62a512659c 100644 --- a/arch/arm/include/asm/arch-uniphier/platdevice.h +++ b/arch/arm/include/asm/arch-uniphier/platdevice.h @@ -21,4 +21,6 @@ U_BOOT_DEVICE(serial##n) = { \ .platdata = &serial_device##n \ }; +#include <asm/arch/ehci-uniphier.h> + #endif /* ARCH_PLATDEVICE_H */ diff --git a/arch/arm/include/asm/arch-uniphier/sg-regs.h b/arch/arm/include/asm/arch-uniphier/sg-regs.h index 79d7ec7148..fa5e6ae0f2 100644 --- a/arch/arm/include/asm/arch-uniphier/sg-regs.h +++ b/arch/arm/include/asm/arch-uniphier/sg-regs.h @@ -88,7 +88,18 @@ #define SG_PINMON0_CLK_MODE_AXOSEL_20480KHZ (0x2 << 16) #define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A (0x3 << 16) -#ifndef __ASSEMBLY__ +#ifdef __ASSEMBLY__ + + .macro set_pinsel, n, value, ra, rd + ldr \ra, =SG_PINSEL_ADDR(\n) + ldr \rd, [\ra] + and \rd, \rd, #SG_PINSEL_MASK(\n) + orr \rd, \rd, #SG_PINSEL_MODE(\n, \value) + str \rd, [\ra] + .endm + +#else + #include <linux/types.h> #include <asm/io.h> diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h index 541b443254..1c8c4251ee 100644 --- a/arch/arm/include/asm/macro.h +++ b/arch/arm/include/asm/macro.h @@ -193,7 +193,7 @@ lr .req x30 0 : wfi ldr \wreg2, [\xreg1, GICC_AIAR] str \wreg2, [\xreg1, GICC_AEOIR] - and \wreg2, \wreg2, #3ff + and \wreg2, \wreg2, #0x3ff cbnz \wreg2, 0b .endm #endif diff --git a/arch/arm/include/debug/8250.S b/arch/arm/include/debug/8250.S new file mode 100644 index 0000000000..d47a892652 --- /dev/null +++ b/arch/arm/include/debug/8250.S @@ -0,0 +1,52 @@ +/* + * arch/arm/include/debug/8250.S + * + * Copyright (C) 1994-2013 Russell King + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <linux/serial_reg.h> + + .macro addruart, rp, rv, tmp + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT + .endm + +#ifdef CONFIG_DEBUG_UART_8250_WORD + .macro store, rd, rx:vararg + str \rd, \rx + .endm + + .macro load, rd, rx:vararg + ldr \rd, \rx + .endm +#else + .macro store, rd, rx:vararg + strb \rd, \rx + .endm + + .macro load, rd, rx:vararg + ldrb \rd, \rx + .endm +#endif + +#define UART_SHIFT CONFIG_DEBUG_UART_8250_SHIFT + + .macro senduart,rd,rx + store \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: load \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + .macro waituart,rd,rx +#ifdef CONFIG_DEBUG_UART_8250_FLOW_CONTROL +1001: load \rd, [\rx, #UART_MSR << UART_SHIFT] + tst \rd, #UART_MSR_CTS + beq 1001b +#endif + .endm diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 1ef240047f..d74e4b8415 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -48,6 +48,8 @@ ifndef CONFIG_ARM64 obj-y += cache-cp15.o endif +obj-$(CONFIG_DEBUG_LL) += debug.o + # For EABI conformant tool chains, provide eabi_compat() ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS))) extra-y += eabi_compat.o diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index cdb1975105..4949d573af 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -15,7 +15,6 @@ #include <common.h> #include <command.h> #include <image.h> -#include <vxworks.h> #include <u-boot/zlib.h> #include <asm/byteorder.h> #include <libfdt.h> diff --git a/arch/arm/lib/debug.S b/arch/arm/lib/debug.S new file mode 100644 index 0000000000..760ba74a3c --- /dev/null +++ b/arch/arm/lib/debug.S @@ -0,0 +1,136 @@ +/* + * linux/arch/arm/kernel/debug.S + * + * Copyright (C) 1994-1999 Russell King + * + * SPDX-License-Identifier: GPL-2.0+ + * + * 32-bit debugging code + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + + .text + +/* + * Some debugging routines (useful if you've got MM problems and + * printk isn't working). For DEBUGGING ONLY!!! Do not leave + * references to these in a production kernel! + */ + +#if !defined(CONFIG_DEBUG_SEMIHOSTING) +#include CONFIG_DEBUG_LL_INCLUDE +#endif + +#ifdef CONFIG_MMU + .macro addruart_current, rx, tmp1, tmp2 + addruart \tmp1, \tmp2, \rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + moveq \rx, \tmp1 + movne \rx, \tmp2 + .endm + +#else /* !CONFIG_MMU */ + .macro addruart_current, rx, tmp1, tmp2 + addruart \rx, \tmp1, \tmp2 + .endm + +#endif /* CONFIG_MMU */ + +/* + * Useful debugging routines + */ +ENTRY(printhex8) + mov r1, #8 + b printhex +ENDPROC(printhex8) + +ENTRY(printhex4) + mov r1, #4 + b printhex +ENDPROC(printhex4) + +ENTRY(printhex2) + mov r1, #2 +printhex: adr r2, hexbuf + add r3, r2, r1 + mov r1, #0 + strb r1, [r3] +1: and r1, r0, #15 + mov r0, r0, lsr #4 + cmp r1, #10 + addlt r1, r1, #'0' + addge r1, r1, #'a' - 10 + strb r1, [r3, #-1]! + teq r3, r2 + bne 1b + mov r0, r2 + b printascii +ENDPROC(printhex2) + +hexbuf: .space 16 + + .ltorg + +#ifndef CONFIG_DEBUG_SEMIHOSTING + +ENTRY(printascii) + addruart_current r3, r1, r2 + b 2f +1: waituart r2, r3 + senduart r1, r3 + busyuart r2, r3 + teq r1, #'\n' + moveq r1, #'\r' + beq 1b +2: teq r0, #0 + ldrneb r1, [r0], #1 + teqne r1, #0 + bne 1b + mov pc, lr +ENDPROC(printascii) + +ENTRY(printch) + addruart_current r3, r1, r2 + mov r1, r0 + mov r0, #0 + b 1b +ENDPROC(printch) + +#ifdef CONFIG_MMU +ENTRY(debug_ll_addr) + addruart r2, r3, ip + str r2, [r0] + str r3, [r1] + mov pc, lr +ENDPROC(debug_ll_addr) +#endif + +#else + +ENTRY(printascii) + mov r1, r0 + mov r0, #0x04 @ SYS_WRITE0 + ARM( svc #0x123456 ) + THUMB( svc #0xab ) + mov pc, lr +ENDPROC(printascii) + +ENTRY(printch) + adr r1, hexbuf + strb r0, [r1] + mov r0, #0x03 @ SYS_WRITEC + ARM( svc #0x123456 ) + THUMB( svc #0xab ) + mov pc, lr +ENDPROC(printch) + +ENTRY(debug_ll_addr) + mov r2, #0 + str r2, [r0] + str r2, [r1] + mov pc, lr +ENDPROC(debug_ll_addr) + +#endif |
