diff options
Diffstat (limited to 'arch/arm')
155 files changed, 6643 insertions, 1413 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 72558b8562..8f910f39a3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -141,6 +141,12 @@ config ARCH_DAVINCI config KIRKWOOD bool "Marvell Kirkwood" +config TARGET_DB_MV784MP_GP + bool "Support db-mv784mp-gp" + +config TARGET_MAXBCM + bool "Support maxbcm" + config TARGET_DEVKIT3250 bool "Support devkit3250" @@ -444,9 +450,15 @@ config TARGET_SUN4I config TARGET_SUN5I bool "Support sun5i" +config TARGET_SUN6I + bool "Support sun6i" + config TARGET_SUN7I bool "Support sun7i" +config TARGET_SUN8I + bool "Support sun8i" + config TARGET_SNOWBALL bool "Support snowball" @@ -567,6 +579,7 @@ source "board/BuS/eb_cpux9k2/Kconfig" source "board/BuS/vl_ma2sc/Kconfig" source "board/CarMediaLab/flea3/Kconfig" source "board/Marvell/aspenite/Kconfig" +source "board/Marvell/db-mv784mp-gp/Kconfig" source "board/Marvell/dkb/Kconfig" source "board/Marvell/gplugd/Kconfig" source "board/afeb9260/Kconfig" @@ -648,6 +661,7 @@ source "board/jornada/Kconfig" source "board/karo/tx25/Kconfig" source "board/logicpd/imx27lite/Kconfig" source "board/logicpd/imx31_litekit/Kconfig" +source "board/maxbcm/Kconfig" source "board/mpl/vcma9/Kconfig" source "board/olimex/mx23_olinuxino/Kconfig" source "board/palmld/Kconfig" diff --git a/arch/arm/cpu/arm926ejs/at91/led.c b/arch/arm/cpu/arm926ejs/at91/led.c index 46ed055023..b8d5c785df 100644 --- a/arch/arm/cpu/arm926ejs/at91/led.c +++ b/arch/arm/cpu/arm926ejs/at91/led.c @@ -9,6 +9,7 @@ #include <common.h> #include <asm/gpio.h> #include <asm/arch/gpio.h> +#include <status_led.h> #ifdef CONFIG_RED_LED void red_led_on(void) diff --git a/arch/arm/cpu/arm926ejs/kirkwood/Makefile b/arch/arm/cpu/arm926ejs/kirkwood/Makefile index c230ce8994..df4756e4bd 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/Makefile +++ b/arch/arm/cpu/arm926ejs/kirkwood/Makefile @@ -7,7 +7,5 @@ # obj-y = cpu.o -obj-y += dram.o -obj-y += mpp.o -obj-y += timer.o obj-y += cache.o +obj-y += mpp.o diff --git a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c index 881e2de81b..9e412bbb04 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/cpu.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/cpu.c @@ -9,14 +9,11 @@ #include <common.h> #include <netdev.h> #include <asm/cache.h> -#include <u-boot/md5.h> #include <asm/io.h> #include <asm/arch/cpu.h> -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> #include <mvebu_mmc.h> -#define BUFLEN 16 - void reset_cpu(unsigned long ignored) { struct kwcpu_registers *cpureg = @@ -30,31 +27,6 @@ void reset_cpu(unsigned long ignored) } /* - * Generates Ramdom hex number reading some time varient system registers - * and using md5 algorithm - */ -unsigned char get_random_hex(void) -{ - int i; - u32 inbuf[BUFLEN]; - u8 outbuf[BUFLEN]; - - /* - * in case of 88F6281/88F6282/88F6192 A0, - * Bit7 need to reset to generate random values in KW_REG_UNDOC_0x1470 - * Soc reg offsets KW_REG_UNDOC_0x1470 and KW_REG_UNDOC_0x1478 are - * reserved regs and does not have names at this moment - * (no errata available) - */ - writel(readl(KW_REG_UNDOC_0x1478) & ~(1 << 7), KW_REG_UNDOC_0x1478); - for (i = 0; i < BUFLEN; i++) { - inbuf[i] = readl(KW_REG_UNDOC_0x1470); - } - md5((u8 *) inbuf, (BUFLEN * sizeof(u32)), outbuf); - return outbuf[outbuf[7] % 0x0f]; -} - -/* * Window Size * Used with the Base register to set the address window size and location. * Must be programmed from LSB to MSB as sequence of ones followed by @@ -140,50 +112,6 @@ int kw_config_adr_windows(void) } /* - * kw_config_gpio - GPIO configuration - */ -void kw_config_gpio(u32 gpp0_oe_val, u32 gpp1_oe_val, u32 gpp0_oe, u32 gpp1_oe) -{ - struct kwgpio_registers *gpio0reg = - (struct kwgpio_registers *)KW_GPIO0_BASE; - struct kwgpio_registers *gpio1reg = - (struct kwgpio_registers *)KW_GPIO1_BASE; - - /* Init GPIOS to default values as per board requirement */ - writel(gpp0_oe_val, &gpio0reg->dout); - writel(gpp1_oe_val, &gpio1reg->dout); - writel(gpp0_oe, &gpio0reg->oe); - writel(gpp1_oe, &gpio1reg->oe); -} - -/* - * kw_config_mpp - Multi-Purpose Pins Functionality configuration - * - * Each MPP can be configured to different functionality through - * MPP control register, ref (sec 6.1 of kirkwood h/w specification) - * - * There are maximum 64 Multi-Pourpose Pins on Kirkwood - * Each MPP functionality can be configuration by a 4bit value - * of MPP control reg, the value and associated functionality depends - * upon used SoC varient - */ -int kw_config_mpp(u32 mpp0_7, u32 mpp8_15, u32 mpp16_23, u32 mpp24_31, - u32 mpp32_39, u32 mpp40_47, u32 mpp48_55) -{ - u32 *mppreg = (u32 *) KW_MPP_BASE; - - /* program mpp registers */ - writel(mpp0_7, &mppreg[0]); - writel(mpp8_15, &mppreg[1]); - writel(mpp16_23, &mppreg[2]); - writel(mpp24_31, &mppreg[3]); - writel(mpp32_39, &mppreg[4]); - writel(mpp40_47, &mppreg[5]); - writel(mpp48_55, &mppreg[6]); - return 0; -} - -/* * SYSRSTn Duration Counter Support * * Kirkwood SoC implements a hardware-based SYSRSTn duration counter. diff --git a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c b/arch/arm/cpu/arm926ejs/kirkwood/mpp.c index 0ba6f098cb..7222504ed3 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/mpp.c @@ -12,7 +12,7 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/cpu.h> -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> #include <asm/arch/mpp.h> static u32 kirkwood_variant(void) diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 828d10bb5a..29b1d73438 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -9,7 +9,9 @@ */ #include <common.h> +#include <dm.h> #include <errno.h> +#include <ns16550.h> #include <spl.h> #include <asm/arch/cpu.h> #include <asm/arch/hardware.h> @@ -36,6 +38,63 @@ DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_DM_GPIO +static const struct omap_gpio_platdata am33xx_gpio[] = { + { 0, AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, + { 1, AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, + { 2, AM33XX_GPIO2_BASE, METHOD_GPIO_24XX }, + { 3, AM33XX_GPIO3_BASE, METHOD_GPIO_24XX }, +#ifdef CONFIG_AM43XX + { 4, AM33XX_GPIO4_BASE, METHOD_GPIO_24XX }, + { 5, AM33XX_GPIO5_BASE, METHOD_GPIO_24XX }, +#endif +}; + +U_BOOT_DEVICES(am33xx_gpios) = { + { "gpio_omap", &am33xx_gpio[0] }, + { "gpio_omap", &am33xx_gpio[1] }, + { "gpio_omap", &am33xx_gpio[2] }, + { "gpio_omap", &am33xx_gpio[3] }, +#ifdef CONFIG_AM43XX + { "gpio_omap", &am33xx_gpio[4] }, + { "gpio_omap", &am33xx_gpio[5] }, +#endif +}; + +# ifndef CONFIG_OF_CONTROL +/* + * TODO(sjg@chromium.org): When we can move SPL serial to DM, we can remove + * the CONFIGs. At the same time, we should move this to the board files. + */ +static const struct ns16550_platdata am33xx_serial[] = { + { CONFIG_SYS_NS16550_COM1, 2, CONFIG_SYS_NS16550_CLK }, +# ifdef CONFIG_SYS_NS16550_COM2 + { CONFIG_SYS_NS16550_COM2, 2, CONFIG_SYS_NS16550_CLK }, +# ifdef CONFIG_SYS_NS16550_COM3 + { CONFIG_SYS_NS16550_COM3, 2, CONFIG_SYS_NS16550_CLK }, + { CONFIG_SYS_NS16550_COM4, 2, CONFIG_SYS_NS16550_CLK }, + { CONFIG_SYS_NS16550_COM5, 2, CONFIG_SYS_NS16550_CLK }, + { CONFIG_SYS_NS16550_COM6, 2, CONFIG_SYS_NS16550_CLK }, +# endif +# endif +}; + +U_BOOT_DEVICES(am33xx_uarts) = { + { "serial_omap", &am33xx_serial[0] }, +# ifdef CONFIG_SYS_NS16550_COM2 + { "serial_omap", &am33xx_serial[1] }, +# ifdef CONFIG_SYS_NS16550_COM3 + { "serial_omap", &am33xx_serial[2] }, + { "serial_omap", &am33xx_serial[3] }, + { "serial_omap", &am33xx_serial[4] }, + { "serial_omap", &am33xx_serial[5] }, +# endif +# endif +}; +# endif + +#else + static const struct gpio_bank gpio_bank_am33xx[] = { { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, @@ -49,6 +108,8 @@ static const struct gpio_bank gpio_bank_am33xx[] = { const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; +#endif + #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) int cpu_mmc_init(bd_t *bis) { diff --git a/arch/arm/cpu/armv7/armada-xp/Makefile b/arch/arm/cpu/armv7/armada-xp/Makefile new file mode 100644 index 0000000000..885dcee2e1 --- /dev/null +++ b/arch/arm/cpu/armv7/armada-xp/Makefile @@ -0,0 +1,7 @@ +# +# Copyright (C) 2014 Stefan Roese <sr@denx.de> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y = cpu.o diff --git a/arch/arm/cpu/armv7/armada-xp/cpu.c b/arch/arm/cpu/armv7/armada-xp/cpu.c new file mode 100644 index 0000000000..1cf70a9f5d --- /dev/null +++ b/arch/arm/cpu/armv7/armada-xp/cpu.c @@ -0,0 +1,193 @@ +/* + * Copyright (C) 2014 Stefan Roese <sr@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <netdev.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) +#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) + +static struct mbus_win windows[] = { + /* PCIE MEM address space */ + { DEFADR_PCI_MEM, 256 << 20, CPU_TARGET_PCIE13, CPU_ATTR_PCIE_MEM }, + + /* PCIE IO address space */ + { DEFADR_PCI_IO, 64 << 10, CPU_TARGET_PCIE13, CPU_ATTR_PCIE_IO }, + + /* SPI */ + { DEFADR_SPIF, 8 << 20, CPU_TARGET_DEVICEBUS_BOOTROM_SPI, + CPU_ATTR_SPIFLASH }, + + /* NOR */ + { DEFADR_BOOTROM, 8 << 20, CPU_TARGET_DEVICEBUS_BOOTROM_SPI, + CPU_ATTR_BOOTROM }, +}; + +void reset_cpu(unsigned long ignored) +{ + struct mvebu_system_registers *reg = + (struct mvebu_system_registers *)MVEBU_SYSTEM_REG_BASE; + + writel(readl(®->rstoutn_mask) | 1, ®->rstoutn_mask); + writel(readl(®->sys_soft_rst) | 1, ®->sys_soft_rst); + while (1) + ; +} + +#if defined(CONFIG_DISPLAY_CPUINFO) +int print_cpuinfo(void) +{ + u16 devid = (readl(MVEBU_REG_PCIE_DEVID) >> 16) & 0xffff; + u8 revid = readl(MVEBU_REG_PCIE_REVID) & 0xff; + + puts("SoC: "); + + switch (devid) { + case SOC_MV78460_ID: + puts("MV78460-"); + break; + default: + puts("Unknown-"); + break; + } + + switch (revid) { + case 1: + puts("A0\n"); + break; + case 2: + puts("B0\n"); + break; + default: + puts("??\n"); + break; + } + + return 0; +} +#endif /* CONFIG_DISPLAY_CPUINFO */ + +/* + * This function initialize Controller DRAM Fastpath windows. + * It takes the CS size information from the 0x1500 scratch registers + * and sets the correct windows sizes and base addresses accordingly. + * + * These values are set in the scratch registers by the Marvell + * DDR3 training code, which is executed by the BootROM before the + * main payload (U-Boot) is executed. This training code is currently + * only available in the Marvell U-Boot version. It needs to be + * ported to mainline U-Boot SPL at some point. + */ +static void update_sdram_window_sizes(void) +{ + u64 base = 0; + u32 size, temp; + int i; + + for (i = 0; i < SDRAM_MAX_CS; i++) { + size = readl((MVEBU_SDRAM_SCRATCH + (i * 8))) & SDRAM_ADDR_MASK; + if (size != 0) { + size |= ~(SDRAM_ADDR_MASK); + + /* Set Base Address */ + temp = (base & 0xFF000000ll) | ((base >> 32) & 0xF); + writel(temp, MVEBU_SDRAM_BASE + DDR_BASE_CS_OFF(i)); + + /* + * Check if out of max window size and resize + * the window + */ + temp = (readl(MVEBU_SDRAM_BASE + DDR_SIZE_CS_OFF(i)) & + ~(SDRAM_ADDR_MASK)) | 1; + temp |= (size & SDRAM_ADDR_MASK); + writel(temp, MVEBU_SDRAM_BASE + DDR_SIZE_CS_OFF(i)); + + base += ((u64)size + 1); + } else { + /* + * Disable window if not used, otherwise this + * leads to overlapping enabled windows with + * pretty strange results + */ + clrbits_le32(MVEBU_SDRAM_BASE + DDR_SIZE_CS_OFF(i), 1); + } + } +} + +#ifdef CONFIG_ARCH_CPU_INIT +int arch_cpu_init(void) +{ + /* Linux expects the internal registers to be at 0xf1000000 */ + writel(SOC_REGS_PHY_BASE, INTREG_BASE_ADDR_REG); + + /* + * We need to call mvebu_mbus_probe() before calling + * update_sdram_window_sizes() as it disables all previously + * configured mbus windows and then configures them as + * required for U-Boot. Calling update_sdram_window_sizes() + * without this configuration will not work, as the internal + * registers can't be accessed reliably because of potenial + * double mapping. + * After updating the SDRAM access windows we need to call + * mvebu_mbus_probe() again, as this now correctly configures + * the SDRAM areas that are later used by the MVEBU drivers + * (e.g. USB, NETA). + */ + + /* + * First disable all windows + */ + mvebu_mbus_probe(NULL, 0); + + /* + * Now the SDRAM access windows can be reconfigured using + * the information in the SDRAM scratch pad registers + */ + update_sdram_window_sizes(); + + /* + * Finally the mbus windows can be configured with the + * updated SDRAM sizes + */ + mvebu_mbus_probe(windows, ARRAY_SIZE(windows)); + + return 0; +} +#endif /* CONFIG_ARCH_CPU_INIT */ + +/* + * SOC specific misc init + */ +#if defined(CONFIG_ARCH_MISC_INIT) +int arch_misc_init(void) +{ + /* Nothing yet, perhaps we need something here later */ + return 0; +} +#endif /* CONFIG_ARCH_MISC_INIT */ + +#ifdef CONFIG_MVNETA +int cpu_eth_init(bd_t *bis) +{ + mvneta_initialize(bis, MVEBU_EGIGA0_BASE, 0, CONFIG_PHY_BASE_ADDR + 0); + mvneta_initialize(bis, MVEBU_EGIGA1_BASE, 1, CONFIG_PHY_BASE_ADDR + 1); + mvneta_initialize(bis, MVEBU_EGIGA2_BASE, 2, CONFIG_PHY_BASE_ADDR + 2); + mvneta_initialize(bis, MVEBU_EGIGA3_BASE, 3, CONFIG_PHY_BASE_ADDR + 3); + + return 0; +} +#endif + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index b929486da9..3d95dc3339 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -7,7 +7,7 @@ #include <common.h> #include <fdtdec.h> -#include <asm/arch/gpio.h> +#include <asm/gpio.h> #include <asm/arch/pinmux.h> #include <asm/arch/sromc.h> @@ -172,6 +172,9 @@ static int exynos5420_mmc_config(int peripheral, int flags) * this same assumption. */ if ((peripheral == PERIPH_ID_SDMMC0) && (i == (start + 2))) { +#ifndef CONFIG_SPL_BUILD + gpio_request(i, "sdmmc0_vdden"); +#endif gpio_set_value(i, 1); gpio_cfg_pin(i, S5P_GPIO_OUTPUT); } else { diff --git a/arch/arm/cpu/armv7/keystone/Kconfig b/arch/arm/cpu/armv7/keystone/Kconfig index 8249b5e270..393885f710 100644 --- a/arch/arm/cpu/armv7/keystone/Kconfig +++ b/arch/arm/cpu/armv7/keystone/Kconfig @@ -9,6 +9,9 @@ config TARGET_K2HK_EVM config TARGET_K2E_EVM bool "TI Keystone 2 Edison EVM" +config TARGET_K2L_EVM + bool "TI Keystone 2 Lamar EVM" + endchoice config SYS_CPU diff --git a/arch/arm/cpu/armv7/keystone/Makefile b/arch/arm/cpu/armv7/keystone/Makefile index f8519c0403..ed030db2c8 100644 --- a/arch/arm/cpu/armv7/keystone/Makefile +++ b/arch/arm/cpu/armv7/keystone/Makefile @@ -10,10 +10,9 @@ obj-y += psc.o obj-y += clock.o obj-$(CONFIG_SOC_K2HK) += clock-k2hk.o obj-$(CONFIG_SOC_K2E) += clock-k2e.o +obj-$(CONFIG_SOC_K2L) += clock-k2l.o obj-y += cmd_clock.o obj-y += cmd_mon.o -obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_nav.o obj-y += msmc.o -obj-$(CONFIG_SPL_BUILD) += spl.o -obj-y += ddr3.o +obj-y += ddr3.o cmd_ddr3.o obj-y += keystone.o diff --git a/arch/arm/cpu/armv7/keystone/clock-k2l.c b/arch/arm/cpu/armv7/keystone/clock-k2l.c new file mode 100644 index 0000000000..1c5e4d54d8 --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/clock-k2l.c @@ -0,0 +1,138 @@ +/* + * Keystone2: get clk rate for K2L + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/clock_defs.h> + +const struct keystone_pll_regs keystone_pll_regs[] = { + [CORE_PLL] = {KS2_MAINPLLCTL0, KS2_MAINPLLCTL1}, + [PASS_PLL] = {KS2_PASSPLLCTL0, KS2_PASSPLLCTL1}, + [TETRIS_PLL] = {KS2_ARMPLLCTL0, KS2_ARMPLLCTL1}, + [DDR3_PLL] = {KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1}, +}; + +int dev_speeds[] = { + SPD800, + SPD1000, + SPD1200, + SPD800, + SPD800, + SPD800, + SPD800, + SPD800, + SPD1200, + SPD1000, + SPD800, + SPD800, + SPD800, +}; + +int arm_speeds[] = { + SPD800, + SPD1000, + SPD1200, + SPD1350, + SPD1400, + SPD800, + SPD1400, + SPD1350, + SPD1200, + SPD1000, + SPD800, + SPD800, + SPD800, +}; + +/** + * pll_freq_get - get pll frequency + * Fout = Fref * NF(mult) / NR(prediv) / OD + * @pll: pll identifier + */ +static unsigned long pll_freq_get(int pll) +{ + unsigned long mult = 1, prediv = 1, output_div = 2; + unsigned long ret; + u32 tmp, reg; + + if (pll == CORE_PLL) { + ret = external_clk[sys_clk]; + if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN) { + /* PLL mode */ + tmp = __raw_readl(KS2_MAINPLLCTL0); + prediv = (tmp & PLL_DIV_MASK) + 1; + mult = (((tmp & PLLM_MULT_HI_SMASK) >> 6) | + (pllctl_reg_read(pll, mult) & + PLLM_MULT_LO_MASK)) + 1; + output_div = ((pllctl_reg_read(pll, secctl) >> + PLL_CLKOD_SHIFT) & PLL_CLKOD_MASK) + 1; + + ret = ret / prediv / output_div * mult; + } + } else { + switch (pll) { + case PASS_PLL: + ret = external_clk[pa_clk]; + reg = KS2_PASSPLLCTL0; + break; + case TETRIS_PLL: + ret = external_clk[tetris_clk]; + reg = KS2_ARMPLLCTL0; + break; + case DDR3_PLL: + ret = external_clk[ddr3_clk]; + reg = KS2_DDR3APLLCTL0; + break; + default: + return 0; + } + + tmp = __raw_readl(reg); + if (!(tmp & PLLCTL_BYPASS)) { + /* Bypass disabled */ + prediv = (tmp & PLL_DIV_MASK) + 1; + mult = ((tmp >> PLL_MULT_SHIFT) & PLL_MULT_MASK) + 1; + output_div = ((tmp >> PLL_CLKOD_SHIFT) & + PLL_CLKOD_MASK) + 1; + ret = ((ret / prediv) * mult) / output_div; + } + } + + return ret; +} + +unsigned long clk_get_rate(unsigned int clk) +{ + switch (clk) { + case core_pll_clk: return pll_freq_get(CORE_PLL); + case pass_pll_clk: return pll_freq_get(PASS_PLL); + case tetris_pll_clk: return pll_freq_get(TETRIS_PLL); + case ddr3_pll_clk: return pll_freq_get(DDR3_PLL); + case sys_clk0_1_clk: + case sys_clk0_clk: return pll_freq_get(CORE_PLL) / pll0div_read(1); + case sys_clk1_clk: return pll_freq_get(CORE_PLL) / pll0div_read(2); + case sys_clk2_clk: return pll_freq_get(CORE_PLL) / pll0div_read(3); + case sys_clk3_clk: return pll_freq_get(CORE_PLL) / pll0div_read(4); + case sys_clk0_2_clk: return clk_get_rate(sys_clk0_clk) / 2; + case sys_clk0_3_clk: return clk_get_rate(sys_clk0_clk) / 3; + case sys_clk0_4_clk: return clk_get_rate(sys_clk0_clk) / 4; + case sys_clk0_6_clk: return clk_get_rate(sys_clk0_clk) / 6; + case sys_clk0_8_clk: return clk_get_rate(sys_clk0_clk) / 8; + case sys_clk0_12_clk: return clk_get_rate(sys_clk0_clk) / 12; + case sys_clk0_24_clk: return clk_get_rate(sys_clk0_clk) / 24; + case sys_clk1_3_clk: return clk_get_rate(sys_clk1_clk) / 3; + case sys_clk1_4_clk: return clk_get_rate(sys_clk1_clk) / 4; + case sys_clk1_6_clk: return clk_get_rate(sys_clk1_clk) / 6; + case sys_clk1_12_clk: return clk_get_rate(sys_clk1_clk) / 12; + default: + break; + } + + return 0; +} diff --git a/arch/arm/cpu/armv7/keystone/clock.c b/arch/arm/cpu/armv7/keystone/clock.c index 47fc89398d..d13fbc1a4b 100644 --- a/arch/arm/cpu/armv7/keystone/clock.c +++ b/arch/arm/cpu/armv7/keystone/clock.c @@ -185,10 +185,6 @@ void init_pll(const struct pll_init_data *data) tmp &= ~(PLL_BWADJ_HI_MASK); tmp |= ((bwadj >> 8) & PLL_BWADJ_HI_MASK); - /* set PLL Select (bit 13) for PASS PLL */ - if (data->pll == PASS_PLL) - tmp |= PLLCTL_PAPLL; - __raw_writel(tmp, keystone_pll_regs[data->pll].reg1); /* Reset bit: bit 14 for both DDR3 & PASS PLL */ @@ -261,3 +257,16 @@ inline int get_max_arm_speed(void) return get_max_speed((read_efuse_bootrom() >> 16) & 0xffff, arm_speeds); } #endif + +void pass_pll_pa_clk_enable(void) +{ + u32 reg; + + reg = readl(keystone_pll_regs[PASS_PLL].reg1); + + reg |= PLLCTL_PAPLL; + writel(reg, keystone_pll_regs[PASS_PLL].reg1); + + /* wait till clock is enabled */ + sdelay(15000); +} diff --git a/arch/arm/cpu/armv7/keystone/cmd_clock.c b/arch/arm/cpu/armv7/keystone/cmd_clock.c index d97c95be11..af1b701e82 100644 --- a/arch/arm/cpu/armv7/keystone/cmd_clock.c +++ b/arch/arm/cpu/armv7/keystone/cmd_clock.c @@ -58,20 +58,11 @@ pll_cmd_usage: return cmd_usage(cmdtp); } -#ifdef CONFIG_SOC_K2HK -U_BOOT_CMD( - pllset, 5, 0, do_pll_cmd, - "set pll multiplier and pre divider", - "<pa|arm|ddr3a|ddr3b> <mult> <div> <OD>\n" -); -#endif -#ifdef CONFIG_SOC_K2E U_BOOT_CMD( pllset, 5, 0, do_pll_cmd, "set pll multiplier and pre divider", - "<pa|ddr3> <mult> <div> <OD>\n" + PLLSET_CMD_LIST " <mult> <div> <OD>\n" ); -#endif int do_getclk_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { @@ -95,12 +86,8 @@ U_BOOT_CMD( getclk, 2, 0, do_getclk_cmd, "get clock rate", "<clk index>\n" -#ifdef CONFIG_SOC_K2HK - "See the 'enum clk_e' in the clock-k2hk.h for clk indexes\n" -#endif -#ifdef CONFIG_SOC_K2E - "See the 'enum clk_e' in the clock-k2e.h for clk indexes\n" -#endif + "The indexes for clocks:\n" + CLOCK_INDEXES_LIST ); int do_psc_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) @@ -141,5 +128,8 @@ U_BOOT_CMD( psc, 3, 0, do_psc_cmd, "<enable/disable psc module os disable domain>", "<mod/domain index> <en|di|domain>\n" - "See the hardware.h for Power and Sleep Controller (PSC) Domains\n" + "Intended to control Power and Sleep Controller (PSC) domains and\n" + "modules. The module or domain index exectly corresponds to ones\n" + "listed in official TRM. For instance, to enable MSMC RAM clock\n" + "domain use command: psc 14 en.\n" ); diff --git a/arch/arm/cpu/armv7/keystone/cmd_ddr3.c b/arch/arm/cpu/armv7/keystone/cmd_ddr3.c new file mode 100644 index 0000000000..ea78ad8fd5 --- /dev/null +++ b/arch/arm/cpu/armv7/keystone/cmd_ddr3.c @@ -0,0 +1,248 @@ +/* + * Keystone2: DDR3 test commands + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/hardware.h> +#include <asm/arch/ddr3.h> +#include <common.h> +#include <command.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define DDR_MIN_ADDR CONFIG_SYS_SDRAM_BASE + +#define DDR_REMAP_ADDR 0x80000000 +#define ECC_START_ADDR1 ((DDR_MIN_ADDR - DDR_REMAP_ADDR) >> 17) + +#define ECC_END_ADDR1 (((gd->start_addr_sp - DDR_REMAP_ADDR - \ + CONFIG_STACKSIZE) >> 17) - 2) + +#define DDR_TEST_BURST_SIZE 1024 + +static int ddr_memory_test(u32 start_address, u32 end_address, int quick) +{ + u32 index_start, value, index; + + index_start = start_address; + + while (1) { + /* Write a pattern */ + for (index = index_start; + index < index_start + DDR_TEST_BURST_SIZE; + index += 4) + __raw_writel(index, index); + + /* Read and check the pattern */ + for (index = index_start; + index < index_start + DDR_TEST_BURST_SIZE; + index += 4) { + value = __raw_readl(index); + if (value != index) { + printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n", + index, value, __raw_readl(index)); + + return -1; + } + } + + index_start += DDR_TEST_BURST_SIZE; + if (index_start >= end_address) + break; + + if (quick) + continue; + + /* Write a pattern for complementary values */ + for (index = index_start; + index < index_start + DDR_TEST_BURST_SIZE; + index += 4) + __raw_writel((u32)~index, index); + + /* Read and check the pattern */ + for (index = index_start; + index < index_start + DDR_TEST_BURST_SIZE; + index += 4) { + value = __raw_readl(index); + if (value != ~index) { + printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n", + index, value, __raw_readl(index)); + + return -1; + } + } + + index_start += DDR_TEST_BURST_SIZE; + if (index_start >= end_address) + break; + + /* Write a pattern */ + for (index = index_start; + index < index_start + DDR_TEST_BURST_SIZE; + index += 2) + __raw_writew((u16)index, index); + + /* Read and check the pattern */ + for (index = index_start; + index < index_start + DDR_TEST_BURST_SIZE; + index += 2) { + value = __raw_readw(index); + if (value != (u16)index) { + printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n", + index, value, __raw_readw(index)); + + return -1; + } + } + + index_start += DDR_TEST_BURST_SIZE; + if (index_start >= end_address) + break; + + /* Write a pattern */ + for (index = index_start; + index < index_start + DDR_TEST_BURST_SIZE; + index += 1) + __raw_writeb((u8)index, index); + + /* Read and check the pattern */ + for (index = index_start; + index < index_start + DDR_TEST_BURST_SIZE; + index += 1) { + value = __raw_readb(index); + if (value != (u8)index) { + printf("ddr_memory_test: Failed at address index = 0x%x value = 0x%x *(index) = 0x%x\n", + index, value, __raw_readb(index)); + + return -1; + } + } + + index_start += DDR_TEST_BURST_SIZE; + if (index_start >= end_address) + break; + } + + puts("ddr memory test PASSED!\n"); + return 0; +} + +static int ddr_memory_compare(u32 address1, u32 address2, u32 size) +{ + u32 index, value, index2, value2; + + for (index = address1, index2 = address2; + index < address1 + size; + index += 4, index2 += 4) { + value = __raw_readl(index); + value2 = __raw_readl(index2); + + if (value != value2) { + printf("ddr_memory_test: Compare failed at address = 0x%x value = 0x%x, address2 = 0x%x value2 = 0x%x\n", + index, value, index2, value2); + + return -1; + } + } + + puts("ddr memory compare PASSED!\n"); + return 0; +} + +static int ddr_memory_ecc_err(u32 base, u32 address, u32 ecc_err) +{ + u32 value1, value2, value3; + + puts("Disabling DDR ECC ...\n"); + ddr3_disable_ecc(base); + + value1 = __raw_readl(address); + value2 = value1 ^ ecc_err; + __raw_writel(value2, address); + + value3 = __raw_readl(address); + printf("ECC err test, addr 0x%x, read data 0x%x, wrote data 0x%x, err pattern: 0x%x, read after write data 0x%x\n", + address, value1, value2, ecc_err, value3); + + __raw_writel(ECC_START_ADDR1 | (ECC_END_ADDR1 << 16), + base + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET); + + puts("Enabling DDR ECC ...\n"); + ddr3_enable_ecc(base, 1); + + value1 = __raw_readl(address); + printf("ECC err test, addr 0x%x, read data 0x%x\n", address, value1); + + ddr3_check_ecc_int(base); + return 0; +} + +static int do_ddr_test(cmd_tbl_t *cmdtp, + int flag, int argc, char * const argv[]) +{ + u32 start_addr, end_addr, size, ecc_err; + + if ((argc == 4) && (strncmp(argv[1], "ecc_err", 8) == 0)) { + if (!ddr3_ecc_support_rmw(KS2_DDR3A_EMIF_CTRL_BASE)) { + puts("ECC RMW isn't supported for this SOC\n"); + return 1; + } + + start_addr = simple_strtoul(argv[2], NULL, 16); + ecc_err = simple_strtoul(argv[3], NULL, 16); + + if ((start_addr < CONFIG_SYS_SDRAM_BASE) || + (start_addr > (CONFIG_SYS_SDRAM_BASE + + CONFIG_MAX_RAM_BANK_SIZE - 1))) { + puts("Invalid address!\n"); + return cmd_usage(cmdtp); + } + + ddr_memory_ecc_err(KS2_DDR3A_EMIF_CTRL_BASE, + start_addr, ecc_err); + return 0; + } + + if (!(((argc == 4) && (strncmp(argv[1], "test", 5) == 0)) || + ((argc == 5) && (strncmp(argv[1], "compare", 8) == 0)))) + return cmd_usage(cmdtp); + + start_addr = simple_strtoul(argv[2], NULL, 16); + end_addr = simple_strtoul(argv[3], NULL, 16); + + if ((start_addr < CONFIG_SYS_SDRAM_BASE) || + (start_addr > (CONFIG_SYS_SDRAM_BASE + + CONFIG_MAX_RAM_BANK_SIZE - 1)) || + (end_addr < CONFIG_SYS_SDRAM_BASE) || + (end_addr > (CONFIG_SYS_SDRAM_BASE + + CONFIG_MAX_RAM_BANK_SIZE - 1)) || (start_addr >= end_addr)) { + puts("Invalid start or end address!\n"); + return cmd_usage(cmdtp); + } + + puts("Please wait ...\n"); + if (argc == 5) { + size = simple_strtoul(argv[4], NULL, 16); + ddr_memory_compare(start_addr, end_addr, size); + } else { + ddr_memory_test(start_addr, end_addr, 0); + } + + return 0; +} + +U_BOOT_CMD(ddr, 5, 1, do_ddr_test, + "DDR3 test", + "test <start_addr in hex> <end_addr in hex> - test DDR from start\n" + " address to end address\n" + "ddr compare <start_addr in hex> <end_addr in hex> <size in hex> -\n" + " compare DDR data of (size) bytes from start address to end\n" + " address\n" + "ddr ecc_err <addr in hex> <bit_err in hex> - generate bit errors\n" + " in DDR data at <addr>, the command will read a 32-bit data\n" + " from <addr>, and write (data ^ bit_err) back to <addr>\n" +); diff --git a/arch/arm/cpu/armv7/keystone/ddr3.c b/arch/arm/cpu/armv7/keystone/ddr3.c index 2eabec10f9..923906afb5 100644 --- a/arch/arm/cpu/armv7/keystone/ddr3.c +++ b/arch/arm/cpu/armv7/keystone/ddr3.c @@ -9,9 +9,19 @@ #include <asm/io.h> #include <common.h> +#include <asm/arch/msmc.h> #include <asm/arch/ddr3.h> #include <asm/arch/psc_defs.h> +#include <asm/ti-common/ti-edma3.h> + +#define DDR3_EDMA_BLK_SIZE_SHIFT 10 +#define DDR3_EDMA_BLK_SIZE (1 << DDR3_EDMA_BLK_SIZE_SHIFT) +#define DDR3_EDMA_BCNT 0x8000 +#define DDR3_EDMA_CCNT 1 +#define DDR3_EDMA_XF_SIZE (DDR3_EDMA_BLK_SIZE * DDR3_EDMA_BCNT) +#define DDR3_EDMA_SLOT_NUM 1 + void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg) { unsigned int tmp; @@ -70,6 +80,240 @@ void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg) __raw_writel(emif_cfg->sdrfc, base + KS2_DDR3_SDRFC_OFFSET); } +int ddr3_ecc_support_rmw(u32 base) +{ + u32 value = __raw_readl(base + KS2_DDR3_MIDR_OFFSET); + + /* Check the DDR3 controller ID reg if the controllers + supports ECC RMW or not */ + if (value == 0x40461C02) + return 1; + + return 0; +} + +static void ddr3_ecc_config(u32 base, u32 value) +{ + u32 data; + + __raw_writel(value, base + KS2_DDR3_ECC_CTRL_OFFSET); + udelay(100000); /* delay required to synchronize across clock domains */ + + if (value & KS2_DDR3_ECC_EN) { + /* Clear the 1-bit error count */ + data = __raw_readl(base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET); + __raw_writel(data, base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET); + + /* enable the ECC interrupt */ + __raw_writel(KS2_DDR3_1B_ECC_ERR_SYS | KS2_DDR3_2B_ECC_ERR_SYS | + KS2_DDR3_WR_ECC_ERR_SYS, + base + KS2_DDR3_ECC_INT_ENABLE_SET_SYS_OFFSET); + + /* Clear the ECC error interrupt status */ + __raw_writel(KS2_DDR3_1B_ECC_ERR_SYS | KS2_DDR3_2B_ECC_ERR_SYS | + KS2_DDR3_WR_ECC_ERR_SYS, + base + KS2_DDR3_ECC_INT_STATUS_OFFSET); + } +} + +static void ddr3_reset_data(u32 base, u32 ddr3_size) +{ + u32 mpax[2]; + u32 seg_num; + u32 seg, blks, dst, edma_blks; + struct edma3_slot_config slot; + struct edma3_channel_config edma_channel; + u32 edma_src[DDR3_EDMA_BLK_SIZE/4] __aligned(16) = {0, }; + + /* Setup an edma to copy the 1k block to the entire DDR */ + puts("\nClear entire DDR3 memory to enable ECC\n"); + + /* save the SES MPAX regs */ + msmc_get_ses_mpax(8, 0, mpax); + + /* setup edma slot 1 configuration */ + slot.opt = EDMA3_SLOPT_TRANS_COMP_INT_ENB | + EDMA3_SLOPT_COMP_CODE(0) | + EDMA3_SLOPT_STATIC | EDMA3_SLOPT_AB_SYNC; + slot.bcnt = DDR3_EDMA_BCNT; + slot.acnt = DDR3_EDMA_BLK_SIZE; + slot.ccnt = DDR3_EDMA_CCNT; + slot.src_bidx = 0; + slot.dst_bidx = DDR3_EDMA_BLK_SIZE; + slot.src_cidx = 0; + slot.dst_cidx = 0; + slot.link = EDMA3_PARSET_NULL_LINK; + slot.bcntrld = 0; + edma3_slot_configure(KS2_EDMA0_BASE, DDR3_EDMA_SLOT_NUM, &slot); + + /* configure quik edma channel */ + edma_channel.slot = DDR3_EDMA_SLOT_NUM; + edma_channel.chnum = 0; + edma_channel.complete_code = 0; + /* event trigger after dst update */ + edma_channel.trigger_slot_word = EDMA3_TWORD(dst); + qedma3_start(KS2_EDMA0_BASE, &edma_channel); + + /* DDR3 size in segments (4KB seg size) */ + seg_num = ddr3_size << (30 - KS2_MSMC_SEG_SIZE_SHIFT); + + for (seg = 0; seg < seg_num; seg += KS2_MSMC_MAP_SEG_NUM) { + /* map 2GB 36-bit DDR address to 32-bit DDR address in EMIF + access slave interface so that edma driver can access */ + msmc_map_ses_segment(8, 0, base >> KS2_MSMC_SEG_SIZE_SHIFT, + KS2_MSMC_DST_SEG_BASE + seg, MPAX_SEG_2G); + + if ((seg_num - seg) > KS2_MSMC_MAP_SEG_NUM) + edma_blks = KS2_MSMC_MAP_SEG_NUM << + (KS2_MSMC_SEG_SIZE_SHIFT + - DDR3_EDMA_BLK_SIZE_SHIFT); + else + edma_blks = (seg_num - seg) << (KS2_MSMC_SEG_SIZE_SHIFT + - DDR3_EDMA_BLK_SIZE_SHIFT); + + /* Use edma driver to scrub 2GB DDR memory */ + for (dst = base, blks = 0; blks < edma_blks; + blks += DDR3_EDMA_BCNT, dst += DDR3_EDMA_XF_SIZE) { + edma3_set_src_addr(KS2_EDMA0_BASE, + edma_channel.slot, (u32)edma_src); + edma3_set_dest_addr(KS2_EDMA0_BASE, + edma_channel.slot, (u32)dst); + + while (edma3_check_for_transfer(KS2_EDMA0_BASE, + &edma_channel)) + udelay(10); + } + } + + qedma3_stop(KS2_EDMA0_BASE, &edma_channel); + + /* restore the SES MPAX regs */ + msmc_set_ses_mpax(8, 0, mpax); +} + +static void ddr3_ecc_init_range(u32 base) +{ + u32 ecc_val = KS2_DDR3_ECC_EN; + u32 rmw = ddr3_ecc_support_rmw(base); + + if (rmw) + ecc_val |= KS2_DDR3_ECC_RMW_EN; + + __raw_writel(0, base + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET); + + ddr3_ecc_config(base, ecc_val); +} + +void ddr3_enable_ecc(u32 base, int test) +{ + u32 ecc_val = KS2_DDR3_ECC_ENABLE; + u32 rmw = ddr3_ecc_support_rmw(base); + + if (test) + ecc_val |= KS2_DDR3_ECC_ADDR_RNG_1_EN; + + if (!rmw) { + if (!test) + /* by default, disable ecc when rmw = 0 and no + ecc test */ + ecc_val = 0; + } else { + ecc_val |= KS2_DDR3_ECC_RMW_EN; + } + + ddr3_ecc_config(base, ecc_val); +} + +void ddr3_disable_ecc(u32 base) +{ + ddr3_ecc_config(base, 0); +} + +#if defined(CONFIG_SOC_K2HK) || defined(CONFIG_SOC_K2L) +static void cic_init(u32 base) +{ + /* Disable CIC global interrupts */ + __raw_writel(0, base + KS2_CIC_GLOBAL_ENABLE); + + /* Set to normal mode, no nesting, no priority hold */ + __raw_writel(0, base + KS2_CIC_CTRL); + __raw_writel(0, base + KS2_CIC_HOST_CTRL); + + /* Enable CIC global interrupts */ + __raw_writel(1, base + KS2_CIC_GLOBAL_ENABLE); +} + +static void cic_map_cic_to_gic(u32 base, u32 chan_num, u32 irq_num) +{ + /* Map the system interrupt to a CIC channel */ + __raw_writeb(chan_num, base + KS2_CIC_CHAN_MAP(0) + irq_num); + + /* Enable CIC system interrupt */ + __raw_writel(irq_num, base + KS2_CIC_SYS_ENABLE_IDX_SET); + + /* Enable CIC Host interrupt */ + __raw_writel(chan_num, base + KS2_CIC_HOST_ENABLE_IDX_SET); +} + +static void ddr3_map_ecc_cic2_irq(u32 base) +{ + cic_init(base); + cic_map_cic_to_gic(base, KS2_CIC2_DDR3_ECC_CHAN_NUM, + KS2_CIC2_DDR3_ECC_IRQ_NUM); +} +#endif + +void ddr3_init_ecc(u32 base) +{ + u32 ddr3_size; + + if (!ddr3_ecc_support_rmw(base)) { + ddr3_disable_ecc(base); + return; + } + + ddr3_ecc_init_range(base); + ddr3_size = ddr3_get_size(); + ddr3_reset_data(CONFIG_SYS_SDRAM_BASE, ddr3_size); + + /* mapping DDR3 ECC system interrupt from CIC2 to GIC */ +#if defined(CONFIG_SOC_K2HK) || defined(CONFIG_SOC_K2L) + ddr3_map_ecc_cic2_irq(KS2_CIC2_BASE); +#endif + ddr3_enable_ecc(base, 0); +} + +void ddr3_check_ecc_int(u32 base) +{ + char *env; + int ecc_test = 0; + u32 value = __raw_readl(base + KS2_DDR3_ECC_INT_STATUS_OFFSET); + + env = getenv("ecc_test"); + if (env) + ecc_test = simple_strtol(env, NULL, 0); + + if (value & KS2_DDR3_WR_ECC_ERR_SYS) + puts("DDR3 ECC write error interrupted\n"); + + if (value & KS2_DDR3_2B_ECC_ERR_SYS) { + puts("DDR3 ECC 2-bit error interrupted\n"); + + if (!ecc_test) { + puts("Reseting the device ...\n"); + reset_cpu(0); + } + } + + value = __raw_readl(base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET); + if (value) { + printf("1-bit ECC err count: 0x%x\n", value); + value = __raw_readl(base + + KS2_DDR3_ONE_BIT_ECC_ERR_ADDR_LOG_OFFSET); + printf("1-bit ECC err address log: 0x%x\n", value); + } +} + void ddr3_reset_ddrphy(void) { u32 tmp; diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c index a8f8aee8ab..c2b947839d 100644 --- a/arch/arm/cpu/armv7/keystone/init.c +++ b/arch/arm/cpu/armv7/keystone/init.c @@ -13,6 +13,7 @@ #include <asm/arch/msmc.h> #include <asm/arch/clock.h> #include <asm/arch/hardware.h> +#include <asm/arch/psc_defs.h> void chip_configuration_unlock(void) { @@ -20,17 +21,67 @@ void chip_configuration_unlock(void) __raw_writel(KS2_KICK1_MAGIC, KS2_KICK1); } +#ifdef CONFIG_SOC_K2L +void osr_init(void) +{ + u32 i; + u32 j; + u32 val; + u32 base = KS2_OSR_CFG_BASE; + u32 ecc_ctrl[KS2_OSR_NUM_RAM_BANKS]; + + /* Enable the OSR clock domain */ + psc_enable_module(KS2_LPSC_OSR); + + /* Disable OSR ECC check for all the ram banks */ + for (i = 0; i < KS2_OSR_NUM_RAM_BANKS; i++) { + val = i | KS2_OSR_ECC_VEC_TRIG_RD | + (KS2_OSR_ECC_CTRL << KS2_OSR_ECC_VEC_RD_ADDR_SH); + + writel(val , base + KS2_OSR_ECC_VEC); + + /** + * wait till read is done. + * Print should be added after earlyprintk support is added. + */ + for (j = 0; j < 10000; j++) { + val = readl(base + KS2_OSR_ECC_VEC); + if (val & KS2_OSR_ECC_VEC_RD_DONE) + break; + } + + ecc_ctrl[i] = readl(base + KS2_OSR_ECC_CTRL) ^ + KS2_OSR_ECC_CTRL_CHK; + + writel(ecc_ctrl[i], KS2_MSMC_DATA_BASE + i * 4); + writel(ecc_ctrl[i], base + KS2_OSR_ECC_CTRL); + } + + /* Reset OSR memory to all zeros */ + for (i = 0; i < KS2_OSR_SIZE; i += 4) + writel(0, KS2_OSR_DATA_BASE + i); + + /* Enable OSR ECC check for all the ram banks */ + for (i = 0; i < KS2_OSR_NUM_RAM_BANKS; i++) + writel(ecc_ctrl[i] | + KS2_OSR_ECC_CTRL_CHK, base + KS2_OSR_ECC_CTRL); +} +#endif + int arch_cpu_init(void) { chip_configuration_unlock(); icache_enable(); - msmc_share_all_segments(8); /* TETRIS */ - msmc_share_all_segments(9); /* NETCP */ - msmc_share_all_segments(10); /* QM PDSP */ - msmc_share_all_segments(11); /* PCIE 0 */ -#ifdef CONFIG_SOC_K2E - msmc_share_all_segments(13); /* PCIE 1 */ + msmc_share_all_segments(KS2_MSMC_SEGMENT_TETRIS); + msmc_share_all_segments(KS2_MSMC_SEGMENT_NETCP); + msmc_share_all_segments(KS2_MSMC_SEGMENT_QM_PDSP); + msmc_share_all_segments(KS2_MSMC_SEGMENT_PCIE0); +#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L) + msmc_share_all_segments(KS2_MSMC_SEGMENT_PCIE1); +#endif +#ifdef CONFIG_SOC_K2L + osr_init(); #endif /* diff --git a/arch/arm/cpu/armv7/keystone/keystone_nav.c b/arch/arm/cpu/armv7/keystone/keystone_nav.c deleted file mode 100644 index 39d6f995f7..0000000000 --- a/arch/arm/cpu/armv7/keystone/keystone_nav.c +++ /dev/null @@ -1,376 +0,0 @@ -/* - * Multicore Navigator driver for TI Keystone 2 devices. - * - * (C) Copyright 2012-2014 - * Texas Instruments Incorporated, <www.ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <asm/io.h> -#include <asm/arch/keystone_nav.h> - -static int soc_type = -#ifdef CONFIG_SOC_K2HK - k2hk; -#endif - -struct qm_config k2hk_qm_memmap = { - .stat_cfg = 0x02a40000, - .queue = (struct qm_reg_queue *)0x02a80000, - .mngr_vbusm = 0x23a80000, - .i_lram = 0x00100000, - .proxy = (struct qm_reg_queue *)0x02ac0000, - .status_ram = 0x02a06000, - .mngr_cfg = (struct qm_cfg_reg *)0x02a02000, - .intd_cfg = 0x02a0c000, - .desc_mem = (struct descr_mem_setup_reg *)0x02a03000, - .region_num = 64, - .pdsp_cmd = 0x02a20000, - .pdsp_ctl = 0x02a0f000, - .pdsp_iram = 0x02a10000, - .qpool_num = 4000, -}; - -/* - * We are going to use only one type of descriptors - host packet - * descriptors. We staticaly allocate memory for them here - */ -struct qm_host_desc desc_pool[HDESC_NUM] __aligned(sizeof(struct qm_host_desc)); - -static struct qm_config *qm_cfg; - -inline int num_of_desc_to_reg(int num_descr) -{ - int j, num; - - for (j = 0, num = 32; j < 15; j++, num *= 2) { - if (num_descr <= num) - return j; - } - - return 15; -} - -static int _qm_init(struct qm_config *cfg) -{ - u32 j; - - if (cfg == NULL) - return QM_ERR; - - qm_cfg = cfg; - - qm_cfg->mngr_cfg->link_ram_base0 = qm_cfg->i_lram; - qm_cfg->mngr_cfg->link_ram_size0 = HDESC_NUM * 8; - qm_cfg->mngr_cfg->link_ram_base1 = 0; - qm_cfg->mngr_cfg->link_ram_size1 = 0; - qm_cfg->mngr_cfg->link_ram_base2 = 0; - - qm_cfg->desc_mem[0].base_addr = (u32)desc_pool; - qm_cfg->desc_mem[0].start_idx = 0; - qm_cfg->desc_mem[0].desc_reg_size = - (((sizeof(struct qm_host_desc) >> 4) - 1) << 16) | - num_of_desc_to_reg(HDESC_NUM); - - memset(desc_pool, 0, sizeof(desc_pool)); - for (j = 0; j < HDESC_NUM; j++) - qm_push(&desc_pool[j], qm_cfg->qpool_num); - - return QM_OK; -} - -int qm_init(void) -{ - switch (soc_type) { - case k2hk: - return _qm_init(&k2hk_qm_memmap); - } - - return QM_ERR; -} - -void qm_close(void) -{ - u32 j; - - if (qm_cfg == NULL) - return; - - queue_close(qm_cfg->qpool_num); - - qm_cfg->mngr_cfg->link_ram_base0 = 0; - qm_cfg->mngr_cfg->link_ram_size0 = 0; - qm_cfg->mngr_cfg->link_ram_base1 = 0; - qm_cfg->mngr_cfg->link_ram_size1 = 0; - qm_cfg->mngr_cfg->link_ram_base2 = 0; - - for (j = 0; j < qm_cfg->region_num; j++) { - qm_cfg->desc_mem[j].base_addr = 0; - qm_cfg->desc_mem[j].start_idx = 0; - qm_cfg->desc_mem[j].desc_reg_size = 0; - } - - qm_cfg = NULL; -} - -void qm_push(struct qm_host_desc *hd, u32 qnum) -{ - u32 regd; - - if (!qm_cfg) - return; - - cpu_to_bus((u32 *)hd, sizeof(struct qm_host_desc)/4); - regd = (u32)hd | ((sizeof(struct qm_host_desc) >> 4) - 1); - writel(regd, &qm_cfg->queue[qnum].ptr_size_thresh); -} - -void qm_buff_push(struct qm_host_desc *hd, u32 qnum, - void *buff_ptr, u32 buff_len) -{ - hd->orig_buff_len = buff_len; - hd->buff_len = buff_len; - hd->orig_buff_ptr = (u32)buff_ptr; - hd->buff_ptr = (u32)buff_ptr; - qm_push(hd, qnum); -} - -struct qm_host_desc *qm_pop(u32 qnum) -{ - u32 uhd; - - if (!qm_cfg) - return NULL; - - uhd = readl(&qm_cfg->queue[qnum].ptr_size_thresh) & ~0xf; - if (uhd) - cpu_to_bus((u32 *)uhd, sizeof(struct qm_host_desc)/4); - - return (struct qm_host_desc *)uhd; -} - -struct qm_host_desc *qm_pop_from_free_pool(void) -{ - if (!qm_cfg) - return NULL; - - return qm_pop(qm_cfg->qpool_num); -} - -void queue_close(u32 qnum) -{ - struct qm_host_desc *hd; - - while ((hd = qm_pop(qnum))) - ; -} - -/* - * DMA API - */ - -struct pktdma_cfg k2hk_netcp_pktdma = { - .global = (struct global_ctl_regs *)0x02004000, - .tx_ch = (struct tx_chan_regs *)0x02004400, - .tx_ch_num = 9, - .rx_ch = (struct rx_chan_regs *)0x02004800, - .rx_ch_num = 26, - .tx_sched = (u32 *)0x02004c00, - .rx_flows = (struct rx_flow_regs *)0x02005000, - .rx_flow_num = 32, - .rx_free_q = 4001, - .rx_rcv_q = 4002, - .tx_snd_q = 648, -}; - -struct pktdma_cfg *netcp; - -static int netcp_rx_disable(void) -{ - u32 j, v, k; - - for (j = 0; j < netcp->rx_ch_num; j++) { - v = readl(&netcp->rx_ch[j].cfg_a); - if (!(v & CPDMA_CHAN_A_ENABLE)) - continue; - - writel(v | CPDMA_CHAN_A_TDOWN, &netcp->rx_ch[j].cfg_a); - for (k = 0; k < TDOWN_TIMEOUT_COUNT; k++) { - udelay(100); - v = readl(&netcp->rx_ch[j].cfg_a); - if (!(v & CPDMA_CHAN_A_ENABLE)) - continue; - } - /* TODO: teardown error on if TDOWN_TIMEOUT_COUNT is reached */ - } - - /* Clear all of the flow registers */ - for (j = 0; j < netcp->rx_flow_num; j++) { - writel(0, &netcp->rx_flows[j].control); - writel(0, &netcp->rx_flows[j].tags); - writel(0, &netcp->rx_flows[j].tag_sel); - writel(0, &netcp->rx_flows[j].fdq_sel[0]); - writel(0, &netcp->rx_flows[j].fdq_sel[1]); - writel(0, &netcp->rx_flows[j].thresh[0]); - writel(0, &netcp->rx_flows[j].thresh[1]); - writel(0, &netcp->rx_flows[j].thresh[2]); - } - - return QM_OK; -} - -static int netcp_tx_disable(void) -{ - u32 j, v, k; - - for (j = 0; j < netcp->tx_ch_num; j++) { - v = readl(&netcp->tx_ch[j].cfg_a); - if (!(v & CPDMA_CHAN_A_ENABLE)) - continue; - - writel(v | CPDMA_CHAN_A_TDOWN, &netcp->tx_ch[j].cfg_a); - for (k = 0; k < TDOWN_TIMEOUT_COUNT; k++) { - udelay(100); - v = readl(&netcp->tx_ch[j].cfg_a); - if (!(v & CPDMA_CHAN_A_ENABLE)) - continue; - } - /* TODO: teardown error on if TDOWN_TIMEOUT_COUNT is reached */ - } - - return QM_OK; -} - -static int _netcp_init(struct pktdma_cfg *netcp_cfg, - struct rx_buff_desc *rx_buffers) -{ - u32 j, v; - struct qm_host_desc *hd; - u8 *rx_ptr; - - if (netcp_cfg == NULL || rx_buffers == NULL || - rx_buffers->buff_ptr == NULL || qm_cfg == NULL) - return QM_ERR; - - netcp = netcp_cfg; - netcp->rx_flow = rx_buffers->rx_flow; - - /* init rx queue */ - rx_ptr = rx_buffers->buff_ptr; - - for (j = 0; j < rx_buffers->num_buffs; j++) { - hd = qm_pop(qm_cfg->qpool_num); - if (hd == NULL) - return QM_ERR; - - qm_buff_push(hd, netcp->rx_free_q, - rx_ptr, rx_buffers->buff_len); - - rx_ptr += rx_buffers->buff_len; - } - - netcp_rx_disable(); - - /* configure rx channels */ - v = CPDMA_REG_VAL_MAKE_RX_FLOW_A(1, 1, 0, 0, 0, 0, 0, netcp->rx_rcv_q); - writel(v, &netcp->rx_flows[netcp->rx_flow].control); - writel(0, &netcp->rx_flows[netcp->rx_flow].tags); - writel(0, &netcp->rx_flows[netcp->rx_flow].tag_sel); - - v = CPDMA_REG_VAL_MAKE_RX_FLOW_D(0, netcp->rx_free_q, 0, - netcp->rx_free_q); - - writel(v, &netcp->rx_flows[netcp->rx_flow].fdq_sel[0]); - writel(v, &netcp->rx_flows[netcp->rx_flow].fdq_sel[1]); - writel(0, &netcp->rx_flows[netcp->rx_flow].thresh[0]); - writel(0, &netcp->rx_flows[netcp->rx_flow].thresh[1]); - writel(0, &netcp->rx_flows[netcp->rx_flow].thresh[2]); - - for (j = 0; j < netcp->rx_ch_num; j++) - writel(CPDMA_CHAN_A_ENABLE, &netcp->rx_ch[j].cfg_a); - - /* configure tx channels */ - /* Disable loopback in the tx direction */ - writel(0, &netcp->global->emulation_control); - -/* TODO: make it dependend on a soc type variable */ -#ifdef CONFIG_SOC_K2HK - /* Set QM base address, only for K2x devices */ - writel(0x23a80000, &netcp->global->qm_base_addr[0]); -#endif - - /* Enable all channels. The current state isn't important */ - for (j = 0; j < netcp->tx_ch_num; j++) { - writel(0, &netcp->tx_ch[j].cfg_b); - writel(CPDMA_CHAN_A_ENABLE, &netcp->tx_ch[j].cfg_a); - } - - return QM_OK; -} - -int netcp_init(struct rx_buff_desc *rx_buffers) -{ - switch (soc_type) { - case k2hk: - _netcp_init(&k2hk_netcp_pktdma, rx_buffers); - return QM_OK; - } - return QM_ERR; -} - -int netcp_close(void) -{ - if (!netcp) - return QM_ERR; - - netcp_tx_disable(); - netcp_rx_disable(); - - queue_close(netcp->rx_free_q); - queue_close(netcp->rx_rcv_q); - queue_close(netcp->tx_snd_q); - - return QM_OK; -} - -int netcp_send(u32 *pkt, int num_bytes, u32 swinfo2) -{ - struct qm_host_desc *hd; - - hd = qm_pop(qm_cfg->qpool_num); - if (hd == NULL) - return QM_ERR; - - hd->desc_info = num_bytes; - hd->swinfo[2] = swinfo2; - hd->packet_info = qm_cfg->qpool_num; - - qm_buff_push(hd, netcp->tx_snd_q, pkt, num_bytes); - - return QM_OK; -} - -void *netcp_recv(u32 **pkt, int *num_bytes) -{ - struct qm_host_desc *hd; - - hd = qm_pop(netcp->rx_rcv_q); - if (!hd) - return NULL; - - *pkt = (u32 *)hd->buff_ptr; - *num_bytes = hd->desc_info & 0x3fffff; - - return hd; -} - -void netcp_release_rxhd(void *hd) -{ - struct qm_host_desc *_hd = (struct qm_host_desc *)hd; - - _hd->buff_len = _hd->orig_buff_len; - _hd->buff_ptr = _hd->orig_buff_ptr; - - qm_push(_hd, netcp->rx_free_q); -} diff --git a/arch/arm/cpu/armv7/keystone/msmc.c b/arch/arm/cpu/armv7/keystone/msmc.c index 7d8e5978df..7899141d54 100644 --- a/arch/arm/cpu/armv7/keystone/msmc.c +++ b/arch/arm/cpu/armv7/keystone/msmc.c @@ -66,3 +66,29 @@ void msmc_share_all_segments(int priv_id) msmc->ses[priv_id][j].mpaxh &= 0xffffff7ful; } } + +void msmc_map_ses_segment(int priv_id, int ses_pair, + u32 src_pfn, u32 dst_pfn, enum mpax_seg_size size) +{ + struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE; + + msmc->ses[priv_id][ses_pair].mpaxh = src_pfn << 12 | + (size & 0x1f) | 0x80; + msmc->ses[priv_id][ses_pair].mpaxl = dst_pfn << 8 | 0x3f; +} + +void msmc_get_ses_mpax(int priv_id, int ses_pair, u32 *mpax) +{ + struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE; + + *mpax++ = msmc->ses[priv_id][ses_pair].mpaxl; + *mpax = msmc->ses[priv_id][ses_pair].mpaxh; +} + +void msmc_set_ses_mpax(int priv_id, int ses_pair, u32 *mpax) +{ + struct msms_regs *msmc = (struct msms_regs *)KS2_MSMC_CTRL_BASE; + + msmc->ses[priv_id][ses_pair].mpaxl = *mpax++; + msmc->ses[priv_id][ses_pair].mpaxh = *mpax; +} diff --git a/arch/arm/cpu/armv7/keystone/spl.c b/arch/arm/cpu/armv7/keystone/spl.c deleted file mode 100644 index d4b0e9b163..0000000000 --- a/arch/arm/cpu/armv7/keystone/spl.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * common spl init code - * - * (C) Copyright 2012-2014 - * Texas Instruments Incorporated, <www.ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <config.h> -#include <ns16550.h> -#include <malloc.h> -#include <spl.h> -#include <spi_flash.h> - -#include <asm/u-boot.h> -#include <asm/utils.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_K2HK_EVM -static struct pll_init_data spl_pll_config[] = { - CORE_PLL_799, - TETRIS_PLL_500, -}; -#endif - -#ifdef CONFIG_K2E_EVM -static struct pll_init_data spl_pll_config[] = { - CORE_PLL_800, -}; -#endif - -void spl_init_keystone_plls(void) -{ - init_plls(ARRAY_SIZE(spl_pll_config), spl_pll_config); -} - -void spl_board_init(void) -{ - spl_init_keystone_plls(); - preloader_console_init(); -} - -u32 spl_boot_device(void) -{ -#if defined(CONFIG_SPL_SPI_LOAD) - return BOOT_DEVICE_SPI; -#else - puts("Unknown boot device\n"); - hang(); -#endif -} diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 6dc26003b6..dd5aaa286a 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -9,6 +9,7 @@ #include <common.h> #include <asm/armv7.h> +#include <asm/bootm.h> #include <asm/pl310.h> #include <asm/errno.h> #include <asm/io.h> diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig index 6fae1e5f36..4a48f84781 100644 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -16,7 +16,7 @@ config TARGET_OMAP3_BEAGLE bool "TI OMAP3 BeagleBoard" config TARGET_CM_T35 - bool "CompuLab CM-T35" + bool "CompuLab CM-T3530 and CM-T3730 boards" config TARGET_DEVKIT8000 bool "TimLL OMAP3 Devkit8000" diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 667e77ff05..c942fe67ee 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -17,13 +17,15 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <dm.h> +#include <mmc.h> #include <spl.h> #include <asm/io.h> #include <asm/arch/sys_proto.h> #include <asm/arch/mem.h> #include <asm/cache.h> #include <asm/armv7.h> -#include <asm/arch/gpio.h> +#include <asm/gpio.h> #include <asm/omap_common.h> #include <asm/arch/mmc_host_def.h> #include <i2c.h> @@ -38,6 +40,27 @@ static void omap3_setup_aux_cr(void); static void omap3_invalidate_l2_cache_secure(void); #endif +#ifdef CONFIG_DM_GPIO +static const struct omap_gpio_platdata omap34xx_gpio[] = { + { 0, OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX }, + { 1, OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX }, + { 2, OMAP34XX_GPIO3_BASE, METHOD_GPIO_24XX }, + { 3, OMAP34XX_GPIO4_BASE, METHOD_GPIO_24XX }, + { 4, OMAP34XX_GPIO5_BASE, METHOD_GPIO_24XX }, + { 5, OMAP34XX_GPIO6_BASE, METHOD_GPIO_24XX }, +}; + +U_BOOT_DEVICES(am33xx_gpios) = { + { "gpio_omap", &omap34xx_gpio[0] }, + { "gpio_omap", &omap34xx_gpio[1] }, + { "gpio_omap", &omap34xx_gpio[2] }, + { "gpio_omap", &omap34xx_gpio[3] }, + { "gpio_omap", &omap34xx_gpio[4] }, + { "gpio_omap", &omap34xx_gpio[5] }, +}; + +#else + static const struct gpio_bank gpio_bank_34xx[6] = { { (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX }, { (void *)OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX }, @@ -49,6 +72,8 @@ static const struct gpio_bank gpio_bank_34xx[6] = { const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx; +#endif + #ifdef CONFIG_SPL_BUILD /* * We use static variables because global data is not ready yet. @@ -266,7 +291,7 @@ int __weak misc_init_r(void) * Routine: wait_for_command_complete * Description: Wait for posting to finish on watchdog *****************************************************************************/ -void wait_for_command_complete(struct watchdog *wd_base) +static void wait_for_command_complete(struct watchdog *wd_base) { int pending = 1; do { diff --git a/arch/arm/cpu/armv7/omap3/emif4.c b/arch/arm/cpu/armv7/omap3/emif4.c index 6c7330a0ca..a2aadc9816 100644 --- a/arch/arm/cpu/armv7/omap3/emif4.c +++ b/arch/arm/cpu/armv7/omap3/emif4.c @@ -61,7 +61,7 @@ u32 get_sdr_cs_offset(u32 cs) * - Init the emif4 module for DDR access * - Early init routines, called from flash or SRAM. */ -void do_emif4_init(void) +static void do_emif4_init(void) { unsigned int regval; /* Set the DDR PHY parameters in PHY ctrl registers */ diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c index bef5f05eaa..bbb65bbe72 100644 --- a/arch/arm/cpu/armv7/omap3/sys_info.c +++ b/arch/arm/cpu/armv7/omap3/sys_info.c @@ -16,6 +16,8 @@ #include <asm/io.h> #include <asm/arch/mem.h> /* get mem tables */ #include <asm/arch/sys_proto.h> +#include <asm/bootm.h> + #include <i2c.h> #include <linux/compiler.h> @@ -202,7 +204,7 @@ u32 __weak get_board_rev(void) /******************************************************** * get_base(); get upper addr of current execution *******************************************************/ -u32 get_base(void) +static u32 get_base(void) { u32 val; diff --git a/arch/arm/cpu/armv7/socfpga/misc.c b/arch/arm/cpu/armv7/socfpga/misc.c index 0eab264668..8c3e5f7cd4 100644 --- a/arch/arm/cpu/armv7/socfpga/misc.c +++ b/arch/arm/cpu/armv7/socfpga/misc.c @@ -176,7 +176,7 @@ static void socfpga_nic301_slave_ns(void) static uint32_t iswgrp_handoff[8]; -int misc_init_r(void) +int arch_early_init_r(void) { int i; for (i = 0; i < 8; i++) /* Cache initial SW setting regs */ diff --git a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds index db9bdad7d6..569fa418f4 100644 --- a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds +++ b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds @@ -42,13 +42,4 @@ SECTIONS . = ALIGN(4); __bss_end = .; } >.sdram - - . = ALIGN(8); - __malloc_start = .; - . = . + CONFIG_SPL_MALLOC_SIZE; - __malloc_end = .; - - . = . + CONFIG_SPL_STACK_SIZE; - . = ALIGN(8); - __stack_start = .; } diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index e9721b27b6..24f1daee64 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -11,9 +11,13 @@ obj-y += timer.o obj-y += board.o obj-y += clock.o obj-y += pinmux.o +obj-$(CONFIG_SUN6I) += prcm.o +obj-$(CONFIG_SUN8I) += prcm.o obj-$(CONFIG_SUN4I) += clock_sun4i.o obj-$(CONFIG_SUN5I) += clock_sun4i.o +obj-$(CONFIG_SUN6I) += clock_sun6i.o obj-$(CONFIG_SUN7I) += clock_sun4i.o +obj-$(CONFIG_SUN8I) += clock_sun6i.o ifndef CONFIG_SPL_BUILD obj-y += cpu_info.o diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index f2cedbb156..06eb6768e8 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -50,18 +50,35 @@ u32 spl_boot_mode(void) int gpio_init(void) { -#if CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)) +#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F) +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I) + /* disable GPB22,23 as uart0 tx,rx to avoid conflict */ + sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT); + sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT); +#endif + sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF2_UART0_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF4_UART0_RX); + sunxi_gpio_set_pull(SUNXI_GPF(4), 1); +#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)) sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX); sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX); - sunxi_gpio_set_pull(SUNXI_GPB(23), 1); + sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP); #elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN5I) sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX); sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX); - sunxi_gpio_set_pull(SUNXI_GPB(20), 1); + sunxi_gpio_set_pull(SUNXI_GPB(20), SUNXI_GPIO_PULL_UP); +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN6I) + sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH20_UART0_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH21_UART0_RX); + sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP); #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I) sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX); sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX); - sunxi_gpio_set_pull(SUNXI_GPG(4), 1); + sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP); +#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_SUN8I) + sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL2_R_UART_TX); + sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL3_R_UART_RX); + sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP); #else #error Unsupported console port number. Please fix pin mux settings in board.c #endif @@ -71,6 +88,7 @@ int gpio_init(void) void reset_cpu(ulong addr) { +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) static const struct sunxi_wdog *wdog = &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog; @@ -82,12 +100,22 @@ void reset_cpu(ulong addr) /* sun5i sometimes gets stuck without this */ writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode); } +#else /* CONFIG_SUN6I || CONFIG_SUN8I || .. */ + static const struct sunxi_wdog *wdog = + ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog; + + /* Set the watchdog for its shortest interval (.5s) and wait */ + writel(WDT_CFG_RESET, &wdog->cfg); + writel(WDT_MODE_EN, &wdog->mode); + writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl); +#endif } /* do some early init */ void s_init(void) { -#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I) +#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || \ + defined CONFIG_SUN6I || defined CONFIG_SUN8I) /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */ asm volatile( "mrc p15, 0, r0, c1, c0, 1\n" diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c index ecbdb0162b..4a0d64fb30 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c @@ -180,6 +180,17 @@ void clock_set_pll1(unsigned int hz) } #endif +unsigned int clock_get_pll5p(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + uint32_t rval = readl(&ccm->pll5_cfg); + int n = ((rval & CCM_PLL5_CTRL_N_MASK) >> CCM_PLL5_CTRL_N_SHIFT); + int k = ((rval & CCM_PLL5_CTRL_K_MASK) >> CCM_PLL5_CTRL_K_SHIFT) + 1; + int p = ((rval & CCM_PLL5_CTRL_P_MASK) >> CCM_PLL5_CTRL_P_SHIFT); + return (24000000 * n * k) >> p; +} + unsigned int clock_get_pll6(void) { struct sunxi_ccm_reg *const ccm = diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun6i.c b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c new file mode 100644 index 0000000000..1eae9767d0 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/clock_sun6i.c @@ -0,0 +1,76 @@ +/* + * sun6i specific clock code + * + * (C) Copyright 2007-2012 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * (C) Copyright 2013 Luke Kenneth Casson Leighton <lkcl@lkcl.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/prcm.h> +#include <asm/arch/sys_proto.h> + +void clock_init_uart(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + +#if CONFIG_CONS_INDEX < 5 + /* uart clock source is apb2 */ + writel(APB2_CLK_SRC_OSC24M| + APB2_CLK_RATE_N_1| + APB2_CLK_RATE_M(1), + &ccm->apb2_div); + + /* open the clock for uart */ + setbits_le32(&ccm->apb2_gate, + CLK_GATE_OPEN << (APB2_GATE_UART_SHIFT + + CONFIG_CONS_INDEX - 1)); + + /* deassert uart reset */ + setbits_le32(&ccm->apb2_reset_cfg, + 1 << (APB2_RESET_UART_SHIFT + + CONFIG_CONS_INDEX - 1)); +#else + /* enable R_PIO and R_UART clocks, and de-assert resets */ + prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_UART); +#endif + + /* Dup with clock_init_safe(), drop once sun6i SPL support lands */ + writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); +} + +int clock_twi_onoff(int port, int state) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + if (port > 3) + return -1; + + /* set the apb clock gate for twi */ + if (state) + setbits_le32(&ccm->apb2_gate, + CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port)); + else + clrbits_le32(&ccm->apb2_gate, + CLK_GATE_OPEN << (APB2_GATE_TWI_SHIFT+port)); + + return 0; +} + +unsigned int clock_get_pll6(void) +{ + struct sunxi_ccm_reg *const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + uint32_t rval = readl(&ccm->pll6_cfg); + int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1; + int k = ((rval & CCM_PLL6_CTRL_K_MASK) >> CCM_PLL6_CTRL_K_SHIFT) + 1; + return 24000000 * n * k / 2; +} diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c index 5cf35acc1e..4f2a09cd2e 100644 --- a/arch/arm/cpu/armv7/sunxi/cpu_info.c +++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c @@ -23,8 +23,12 @@ int print_cpuinfo(void) case 7: puts("CPU: Allwinner A10s (SUN5I)\n"); break; default: puts("CPU: Allwinner A1X (SUN5I)\n"); } +#elif defined CONFIG_SUN6I + puts("CPU: Allwinner A31 (SUN6I)\n"); #elif defined CONFIG_SUN7I puts("CPU: Allwinner A20 (SUN7I)\n"); +#elif defined CONFIG_SUN8I + puts("CPU: Allwinner A23 (SUN8I)\n"); #else #warning Please update cpu_info.c with correct CPU information puts("CPU: SUNXI Family\n"); diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c index 584f7420d7..3cf3cbf19a 100644 --- a/arch/arm/cpu/armv7/sunxi/dram.c +++ b/arch/arm/cpu/armv7/sunxi/dram.c @@ -252,15 +252,9 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) { u32 reg_val; struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - - /* PLL5P and PLL6 are the potential clock sources for MBUS */ - u32 pll6x_div, pll5p_div; - u32 pll6x_clk = clock_get_pll6() / 1000000; - u32 pll5p_clk = clk / 24 * 48; + u32 pll5p_clk, pll6x_clk; + u32 pll5p_div, pll6x_div; u32 pll5p_rate, pll6x_rate; -#ifdef CONFIG_SUN7I - pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */ -#endif /* setup DRAM PLL */ reg_val = readl(&ccm->pll5_cfg); @@ -268,33 +262,32 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) reg_val &= ~CCM_PLL5_CTRL_K_MASK; /* set K to 0 (x1) */ reg_val &= ~CCM_PLL5_CTRL_N_MASK; /* set N to 0 (x0) */ reg_val &= ~CCM_PLL5_CTRL_P_MASK; /* set P to 0 (x1) */ +#ifdef CONFIG_OLD_SUNXI_KERNEL_COMPAT + /* Old kernels are hardcoded to P=1 (divide by 2) */ + reg_val |= CCM_PLL5_CTRL_P(1); +#endif if (clk >= 540 && clk < 552) { - /* dram = 540MHz, pll5p = 1080MHz */ - pll5p_clk = 1080; + /* dram = 540MHz */ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(15)); } else if (clk >= 512 && clk < 528) { - /* dram = 512MHz, pll5p = 1536MHz */ - pll5p_clk = 1536; + /* dram = 512MHz */ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(4)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(16)); } else if (clk >= 496 && clk < 504) { - /* dram = 496MHz, pll5p = 1488MHz */ - pll5p_clk = 1488; + /* dram = 496MHz */ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(3)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(2)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(31)); } else if (clk >= 468 && clk < 480) { - /* dram = 468MHz, pll5p = 936MHz */ - pll5p_clk = 936; + /* dram = 468MHz */ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(13)); } else if (clk >= 396 && clk < 408) { - /* dram = 396MHz, pll5p = 792MHz */ - pll5p_clk = 792; + /* dram = 396MHz */ reg_val |= CCM_PLL5_CTRL_M(CCM_PLL5_CTRL_M_X(2)); reg_val |= CCM_PLL5_CTRL_K(CCM_PLL5_CTRL_K_X(3)); reg_val |= CCM_PLL5_CTRL_N(CCM_PLL5_CTRL_N_X(11)); @@ -322,6 +315,13 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) /* setup MBUS clock */ if (!mbus_clk) mbus_clk = 300; + + /* PLL5P and PLL6 are the potential clock sources for MBUS */ + pll6x_clk = clock_get_pll6() / 1000000; +#ifdef CONFIG_SUN7I + pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */ +#endif + pll5p_clk = clock_get_pll5p() / 1000000; pll6x_div = DIV_ROUND_UP(pll6x_clk, mbus_clk); pll5p_div = DIV_ROUND_UP(pll5p_clk, mbus_clk); pll6x_rate = pll6x_clk / pll6x_div; diff --git a/arch/arm/cpu/armv7/sunxi/prcm.c b/arch/arm/cpu/armv7/sunxi/prcm.c new file mode 100644 index 0000000000..19b4938dc9 --- /dev/null +++ b/arch/arm/cpu/armv7/sunxi/prcm.c @@ -0,0 +1,35 @@ +/* + * Sunxi A31 Power Management Unit + * + * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl> + * http://linux-sunxi.org + * + * Based on sun6i sources and earlier U-Boot Allwinner A10 SPL work + * + * (C) Copyright 2006-2013 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Berg Xing <bergxing@allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/prcm.h> +#include <asm/arch/sys_proto.h> + +/* APB0 clock gate and reset bit offsets are the same. */ +void prcm_apb0_enable(u32 flags) +{ + struct sunxi_prcm_reg *prcm = + (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE; + + /* open the clock for module */ + setbits_le32(&prcm->apb0_gate, flags); + + /* deassert reset for module */ + setbits_le32(&prcm->apb0_reset, flags); +} diff --git a/arch/arm/cpu/armv7/tegra-common/Kconfig b/arch/arm/cpu/armv7/tegra-common/Kconfig index bcae2d6033..3ea6d7651c 100644 --- a/arch/arm/cpu/armv7/tegra-common/Kconfig +++ b/arch/arm/cpu/armv7/tegra-common/Kconfig @@ -17,6 +17,9 @@ config TEGRA124 endchoice +config USE_PRIVATE_LIBGCC + default y if SPL_BUILD + config SYS_CPU default "arm720t" if SPL_BUILD default "armv7" if !SPL_BUILD diff --git a/arch/arm/cpu/armv7/tegra20/display.c b/arch/arm/cpu/armv7/tegra20/display.c index fd77f3f0ef..d98cec9018 100644 --- a/arch/arm/cpu/armv7/tegra20/display.c +++ b/arch/arm/cpu/armv7/tegra20/display.c @@ -194,7 +194,8 @@ static void rgb_enable(struct dc_com_reg *com) writel(rgb_sel_tab[i], &com->pin_output_sel[i]); } -int setup_window(struct disp_ctl_win *win, struct fdt_disp_config *config) +static int setup_window(struct disp_ctl_win *win, + struct fdt_disp_config *config) { win->x = 0; win->y = 0; diff --git a/arch/arm/cpu/armv7/tegra30/Kconfig b/arch/arm/cpu/armv7/tegra30/Kconfig index 54aec4ed50..3abdc7ba17 100644 --- a/arch/arm/cpu/armv7/tegra30/Kconfig +++ b/arch/arm/cpu/armv7/tegra30/Kconfig @@ -3,6 +3,9 @@ if TEGRA30 choice prompt "Tegra30 board select" +config TARGET_APALIS_T30 + bool "Toradex Apalis T30 board" + config TARGET_BEAVER bool "NVIDIA Tegra30 Beaver evaluation board" @@ -20,6 +23,7 @@ endchoice config SYS_SOC default "tegra30" +source "board/toradex/apalis_t30/Kconfig" source "board/nvidia/beaver/Kconfig" source "board/nvidia/cardhu/Kconfig" source "board/toradex/colibri_t30/Kconfig" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile index b385e19544..781b511a97 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o +obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \ sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c new file mode 100644 index 0000000000..0047223181 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/platdevice.h> + +#define UART_MASTER_CLK 36864000 + +SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) +SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) +SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) +SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile index 712afd1bee..e11f4f6d8b 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o +obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o sbc_init.o \ sg_init.o pll_init.o clkrst_init.o pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c new file mode 100644 index 0000000000..6da921e920 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/platdevice.h> + +#define UART_MASTER_CLK 73728000 + +SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) +SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) +SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) +SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile index b385e19544..781b511a97 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o +obj-y += platdevice.o obj-y += boot-mode.o obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \ sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c new file mode 100644 index 0000000000..59d054a310 --- /dev/null +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/platdevice.h> + +#define UART_MASTER_CLK 80000000 + +SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) +SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) +SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) +SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) diff --git a/arch/arm/cpu/tegra-common/board.c b/arch/arm/cpu/tegra-common/board.c index 433da09d10..b6a84a5774 100644 --- a/arch/arm/cpu/tegra-common/board.c +++ b/arch/arm/cpu/tegra-common/board.c @@ -9,6 +9,7 @@ #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> +#include <asm/arch/mc.h> #include <asm/arch/tegra.h> #include <asm/arch-tegra/board.h> #include <asm/arch-tegra/pmc.h> @@ -27,55 +28,6 @@ enum { UART_COUNT = 5, }; -#if defined(CONFIG_TEGRA20) || defined(CONFIG_TEGRA30) || \ - defined(CONFIG_TEGRA114) -/* - * Boot ROM initializes the odmdata in APBDEV_PMC_SCRATCH20_0, - * so we are using this value to identify memory size. - */ -unsigned int query_sdram_size(void) -{ - struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; - u32 reg; - - reg = readl(&pmc->pmc_scratch20); - debug("pmc->pmc_scratch20 (ODMData) = 0x%08x\n", reg); - -#if defined(CONFIG_TEGRA20) - /* bits 30:28 in OdmData are used for RAM size on T20 */ - reg &= 0x70000000; - - switch ((reg) >> 28) { - case 1: - return 0x10000000; /* 256 MB */ - case 0: - case 2: - default: - return 0x20000000; /* 512 MB */ - case 3: - return 0x40000000; /* 1GB */ - } -#else /* Tegra30/Tegra114 */ - /* bits 31:28 in OdmData are used for RAM size on T30 */ - switch ((reg) >> 28) { - case 0: - case 1: - default: - return 0x10000000; /* 256 MB */ - case 2: - return 0x20000000; /* 512 MB */ - case 3: - return 0x30000000; /* 768 MB */ - case 4: - return 0x40000000; /* 1GB */ - case 8: - return 0x7ff00000; /* 2GB - 1MB */ - } -#endif -} -#else -#include <asm/arch/mc.h> - /* Read the RAM size directly from the memory controller */ unsigned int query_sdram_size(void) { @@ -83,12 +35,22 @@ unsigned int query_sdram_size(void) u32 size_mb; size_mb = readl(&mc->mc_emem_cfg); +#if defined(CONFIG_TEGRA20) + debug("mc->mc_emem_cfg (MEM_SIZE_KB) = 0x%08x\n", size_mb); + size_mb = get_ram_size((void *)PHYS_SDRAM_1, size_mb * 1024); +#else debug("mc->mc_emem_cfg (MEM_SIZE_MB) = 0x%08x\n", size_mb); + size_mb = get_ram_size((void *)PHYS_SDRAM_1, size_mb * 1024 * 1024); +#endif - return size_mb * 1024 * 1024; -} +#if defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114) + /* External memory limited to 2047 MB due to IROM/HI-VEC */ + if (size_mb == SZ_2G) size_mb -= SZ_1M; #endif + return size_mb; +} + int dram_init(void) { /* We do not initialise DRAM here. We just query the size */ diff --git a/arch/arm/cpu/tegra-common/sys_info.c b/arch/arm/cpu/tegra-common/sys_info.c index de20325ecf..5933c35ddd 100644 --- a/arch/arm/cpu/tegra-common/sys_info.c +++ b/arch/arm/cpu/tegra-common/sys_info.c @@ -8,7 +8,7 @@ #include <common.h> #include <linux/ctype.h> -void upstring(char *s) +static void upstring(char *s) { while (*s) { *s = toupper(*s); diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index c37580ed84..c34606334d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -22,6 +22,7 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ tegra20-ventana.dtb \ tegra20-whistler.dtb \ tegra20-colibri_t20_iris.dtb \ + tegra30-apalis.dtb \ tegra30-beaver.dtb \ tegra30-cardhu.dtb \ tegra30-colibri.dtb \ diff --git a/arch/arm/dts/am335x-bone-common.dtsi b/arch/arm/dts/am335x-bone-common.dtsi index 2f66deda9f..e70b4d1f1f 100644 --- a/arch/arm/dts/am335x-bone-common.dtsi +++ b/arch/arm/dts/am335x-bone-common.dtsi @@ -10,6 +10,10 @@ model = "TI AM335x BeagleBone"; compatible = "ti,am335x-bone", "ti,am33xx"; + chosen { + stdout-path = &uart0; + }; + cpus { cpu@0 { cpu0-supply = <&dcdc2_reg>; diff --git a/arch/arm/dts/dt-bindings/gpio/gpio.h b/arch/arm/dts/dt-bindings/gpio/gpio.h deleted file mode 100644 index e6b1e0a808..0000000000 --- a/arch/arm/dts/dt-bindings/gpio/gpio.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * This header provides constants for most GPIO bindings. - * - * Most GPIO bindings include a flags cell as part of the GPIO specifier. - * In most cases, the format of the flags cell uses the standard values - * defined in this header. - */ - -#ifndef _DT_BINDINGS_GPIO_GPIO_H -#define _DT_BINDINGS_GPIO_GPIO_H - -#define GPIO_ACTIVE_HIGH 0 -#define GPIO_ACTIVE_LOW 1 - -#endif diff --git a/arch/arm/dts/dt-bindings/pinctrl/am33xx.h b/arch/arm/dts/dt-bindings/pinctrl/am33xx.h deleted file mode 100644 index 2fbc804e1a..0000000000 --- a/arch/arm/dts/dt-bindings/pinctrl/am33xx.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * This header provides constants specific to AM33XX pinctrl bindings. - */ - -#ifndef _DT_BINDINGS_PINCTRL_AM33XX_H -#define _DT_BINDINGS_PINCTRL_AM33XX_H - -#include <dt-bindings/pinctrl/omap.h> - -/* am33xx specific mux bit defines */ -#undef PULL_ENA -#undef INPUT_EN - -#define PULL_DISABLE (1 << 3) -#define INPUT_EN (1 << 5) -#define SLEWCTRL_FAST (1 << 6) - -/* update macro depending on INPUT_EN and PULL_ENA */ -#undef PIN_OUTPUT -#undef PIN_OUTPUT_PULLUP -#undef PIN_OUTPUT_PULLDOWN -#undef PIN_INPUT -#undef PIN_INPUT_PULLUP -#undef PIN_INPUT_PULLDOWN - -#define PIN_OUTPUT (PULL_DISABLE) -#define PIN_OUTPUT_PULLUP (PULL_UP) -#define PIN_OUTPUT_PULLDOWN 0 -#define PIN_INPUT (INPUT_EN | PULL_DISABLE) -#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) -#define PIN_INPUT_PULLDOWN (INPUT_EN) - -/* undef non-existing modes */ -#undef PIN_OFF_NONE -#undef PIN_OFF_OUTPUT_HIGH -#undef PIN_OFF_OUTPUT_LOW -#undef PIN_OFF_INPUT_PULLUP -#undef PIN_OFF_INPUT_PULLDOWN -#undef PIN_OFF_WAKEUPENABLE - -#endif - diff --git a/arch/arm/dts/dt-bindings/pinctrl/omap.h b/arch/arm/dts/dt-bindings/pinctrl/omap.h deleted file mode 100644 index edbd250809..0000000000 --- a/arch/arm/dts/dt-bindings/pinctrl/omap.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This header provides constants for OMAP pinctrl bindings. - * - * Copyright (C) 2009 Nokia - * Copyright (C) 2009-2010 Texas Instruments - */ - -#ifndef _DT_BINDINGS_PINCTRL_OMAP_H -#define _DT_BINDINGS_PINCTRL_OMAP_H - -/* 34xx mux mode options for each pin. See TRM for options */ -#define MUX_MODE0 0 -#define MUX_MODE1 1 -#define MUX_MODE2 2 -#define MUX_MODE3 3 -#define MUX_MODE4 4 -#define MUX_MODE5 5 -#define MUX_MODE6 6 -#define MUX_MODE7 7 - -/* 24xx/34xx mux bit defines */ -#define PULL_ENA (1 << 3) -#define PULL_UP (1 << 4) -#define ALTELECTRICALSEL (1 << 5) - -/* 34xx specific mux bit defines */ -#define INPUT_EN (1 << 8) -#define OFF_EN (1 << 9) -#define OFFOUT_EN (1 << 10) -#define OFFOUT_VAL (1 << 11) -#define OFF_PULL_EN (1 << 12) -#define OFF_PULL_UP (1 << 13) -#define WAKEUP_EN (1 << 14) - -/* 44xx specific mux bit defines */ -#define WAKEUP_EVENT (1 << 15) - -/* Active pin states */ -#define PIN_OUTPUT 0 -#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP) -#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA) -#define PIN_INPUT INPUT_EN -#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP) -#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN) - -/* Off mode states */ -#define PIN_OFF_NONE 0 -#define PIN_OFF_OUTPUT_HIGH (OFF_EN | OFFOUT_EN | OFFOUT_VAL) -#define PIN_OFF_OUTPUT_LOW (OFF_EN | OFFOUT_EN) -#define PIN_OFF_INPUT_PULLUP (OFF_EN | OFF_PULL_EN | OFF_PULL_UP) -#define PIN_OFF_INPUT_PULLDOWN (OFF_EN | OFF_PULL_EN) -#define PIN_OFF_WAKEUPENABLE WAKEUP_EN - -#endif - diff --git a/arch/arm/dts/exynos4.dtsi b/arch/arm/dts/exynos4.dtsi index 110eb43a2f..77fad48fb4 100644 --- a/arch/arm/dts/exynos4.dtsi +++ b/arch/arm/dts/exynos4.dtsi @@ -7,9 +7,16 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { + combiner: interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10440000 0x1000>; + }; + serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x3c>; diff --git a/arch/arm/dts/exynos4210-origen.dts b/arch/arm/dts/exynos4210-origen.dts index 15059d2202..dd2476c1a3 100644 --- a/arch/arm/dts/exynos4210-origen.dts +++ b/arch/arm/dts/exynos4210-origen.dts @@ -8,8 +8,8 @@ */ /dts-v1/; -/include/ "skeleton.dtsi" -/include/ "exynos4.dtsi" +#include "skeleton.dtsi" +#include "exynos4210.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4210"; diff --git a/arch/arm/dts/exynos4210-pinctrl-uboot.dtsi b/arch/arm/dts/exynos4210-pinctrl-uboot.dtsi new file mode 100644 index 0000000000..ee071c162f --- /dev/null +++ b/arch/arm/dts/exynos4210-pinctrl-uboot.dtsi @@ -0,0 +1,27 @@ +/* + * U-Boot additions to enable a generic Exynos GPIO driver + * + * Copyright (c) 2014 Google, Inc + */ + +/{ + pinctrl_0: pinctrl@11400000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,exynos4210-pinctrl"; + }; + + pinctrl_1: pinctrl@11000000 { + #address-cells = <1>; + #size-cells = <0>; + gpy0: gpy0 { + reg = <0xc00>; + }; + }; + + pinctrl_2: pinctrl@03860000 { + #address-cells = <1>; + #size-cells = <0>; + }; + +}; diff --git a/arch/arm/dts/exynos4210-pinctrl.dtsi b/arch/arm/dts/exynos4210-pinctrl.dtsi new file mode 100644 index 0000000000..bda17f79f4 --- /dev/null +++ b/arch/arm/dts/exynos4210-pinctrl.dtsi @@ -0,0 +1,304 @@ +/* + * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2011-2012 Linaro Ltd. + * www.linaro.org + * + * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe2: gpe2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe3: gpe3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe4: gpe4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pinctrl@11000000 { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + }; + + }; +}; diff --git a/arch/arm/dts/exynos4210-smdkv310.dts b/arch/arm/dts/exynos4210-smdkv310.dts index c390c8f0c8..00cad0447d 100644 --- a/arch/arm/dts/exynos4210-smdkv310.dts +++ b/arch/arm/dts/exynos4210-smdkv310.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "exynos4.dtsi" +#include "exynos4.dtsi" / { model = "Samsung SMDKV310 on Exynos4210"; diff --git a/arch/arm/dts/exynos4210-trats.dts b/arch/arm/dts/exynos4210-trats.dts index 0ff69393b7..81188bca13 100644 --- a/arch/arm/dts/exynos4210-trats.dts +++ b/arch/arm/dts/exynos4210-trats.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "exynos4.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung Trats based on Exynos4210"; diff --git a/arch/arm/dts/exynos4210-universal_c210.dts b/arch/arm/dts/exynos4210-universal_c210.dts index 6941906aaa..9139810b1a 100644 --- a/arch/arm/dts/exynos4210-universal_c210.dts +++ b/arch/arm/dts/exynos4210-universal_c210.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "exynos4.dtsi" +#include "exynos4210.dtsi" / { model = "Samsung Universal C210 based on Exynos4210 rev0"; @@ -41,6 +41,19 @@ status = "disabled"; }; + soft-spi { + compatible = "u-boot,soft-spi"; + cs-gpio = <&gpio 235 0>; /* Y43 */ + sclk-gpio = <&gpio 225 0>; /* Y31 */ + mosi-gpio = <&gpio 227 0>; /* Y33 */ + miso-gpio = <&gpio 224 0>; /* Y30 */ + spi-delay-us = <1>; + #address-cells = <1>; + #size-cells = <0>; + cs@0 { + }; + }; + fimd@11c00000 { compatible = "samsung,exynos-fimd"; reg = <0x11c00000 0xa4>; diff --git a/arch/arm/dts/exynos4210.dtsi b/arch/arm/dts/exynos4210.dtsi new file mode 100644 index 0000000000..634a5c1dd2 --- /dev/null +++ b/arch/arm/dts/exynos4210.dtsi @@ -0,0 +1,156 @@ +/* + * Samsung's Exynos4210 SoC device tree source + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "exynos4.dtsi" +#include "exynos4210-pinctrl.dtsi" +#include "exynos4210-pinctrl-uboot.dtsi" + +/ { + compatible = "samsung,exynos4210"; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + }; + + pd_lcd1: lcd1-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + }; + + gic: interrupt-controller@10490000 { + cpu-offset = <0x8000>; + }; + + combiner: interrupt-controller@10440000 { + samsung,combiner-nr = <16>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + }; + + mct@10050000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x10050000 0x800>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; + clocks = <&clock 3>, <&clock 344>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &gic 0 69 0>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 0 42 0>, + <5 &gic 0 48 0>; + }; + }; + + clock: clock-controller@10030000 { + compatible = "samsung,exynos4210-clock"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&combiner>; + interrupts = <2 2>, <3 2>; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos4210-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; + }; + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,exynos4210-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <0 46 0>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_2: pinctrl@03860000 { + compatible = "samsung,exynos4210-pinctrl"; + reg = <0x03860000 0x1000>; + }; + + tmu@100C0000 { + compatible = "samsung,exynos4210-tmu"; + interrupt-parent = <&combiner>; + reg = <0x100C0000 0x100>; + interrupts = <2 4>; + clocks = <&clock 383>; + clock-names = "tmu_apbif"; + status = "disabled"; + }; + + g2d@12800000 { + compatible = "samsung,s5pv210-g2d"; + reg = <0x12800000 0x1000>; + interrupts = <0 89 0>; + clocks = <&clock 177>, <&clock 277>; + clock-names = "sclk_fimg2d", "fimg2d"; + status = "disabled"; + }; + + camera { + clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>; + clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; + + fimc_0: fimc@11800000 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc_1: fimc@11810000 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc_2: fimc@11820000 { + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,lcd-wb; + }; + + fimc_3: fimc@11830000 { + samsung,pix-limits = <1920 8192 1366 1920>; + samsung,rotators = <0>; + samsung,mainscaler-ext; + samsung,lcd-wb; + }; + }; +}; diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts index 24d0bf18e3..4c5e2b39be 100644 --- a/arch/arm/dts/exynos4412-odroid.dts +++ b/arch/arm/dts/exynos4412-odroid.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "exynos4.dtsi" +#include "exynos4.dtsi" / { model = "Odroid based on Exynos4412"; diff --git a/arch/arm/dts/exynos4412-trats2.dts b/arch/arm/dts/exynos4412-trats2.dts index cc58c878b8..3b1e4588b5 100644 --- a/arch/arm/dts/exynos4412-trats2.dts +++ b/arch/arm/dts/exynos4412-trats2.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "exynos4.dtsi" +#include "exynos4412.dtsi" / { model = "Samsung Trats2 based on Exynos4412"; diff --git a/arch/arm/dts/exynos4412.dtsi b/arch/arm/dts/exynos4412.dtsi new file mode 100644 index 0000000000..87b339c739 --- /dev/null +++ b/arch/arm/dts/exynos4412.dtsi @@ -0,0 +1,38 @@ +/* + * Samsung's Exynos4412 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "exynos4x12.dtsi" + +/ { + compatible = "samsung,exynos4412"; + + gic: interrupt-controller@10490000 { + cpu-offset = <0x4000>; + }; + + interrupt-controller@10440000 { + samsung,combiner-nr = <20>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>; + }; + +}; diff --git a/arch/arm/dts/exynos4x12-pinctrl-uboot.dtsi b/arch/arm/dts/exynos4x12-pinctrl-uboot.dtsi new file mode 100644 index 0000000000..c02796d2b3 --- /dev/null +++ b/arch/arm/dts/exynos4x12-pinctrl-uboot.dtsi @@ -0,0 +1,46 @@ +/* + * U-Boot additions to enable a generic Exynos GPIO driver + * + * Copyright (c) 2014 Google, Inc + */ + +/{ + pinctrl_0: pinctrl@11400000 { + #address-cells = <1>; + #size-cells = <0>; + gpf0: gpf0 { + reg = <0xc180>; + }; + gpj0: gpj0 { + reg = <0x240>; + }; + }; + + pinctrl_1: pinctrl@11000000 { + #address-cells = <1>; + #size-cells = <0>; + gpk0: gpk0 { + reg = <0x40>; + }; + gpm0: gpm0 { + reg = <0x260>; + }; + gpy0: gpy0 { + reg = <0x120>; + }; + gpx0: gpx0 { + reg = <0xc00>; + }; + }; + + pinctrl_2: pinctrl@03860000 { + #address-cells = <1>; + #size-cells = <0>; + }; + + pinctrl_3: pinctrl@106E0000 { + #address-cells = <1>; + #size-cells = <0>; + }; + +}; diff --git a/arch/arm/dts/exynos4x12-pinctrl.dtsi b/arch/arm/dts/exynos4x12-pinctrl.dtsi new file mode 100644 index 0000000000..93f39983b4 --- /dev/null +++ b/arch/arm/dts/exynos4x12-pinctrl.dtsi @@ -0,0 +1,344 @@ +/* + * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pinctrl@11000000 { + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm0: gpm0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm1: gpm1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm2: gpm2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm3: gpm3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm4: gpm4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pinctrl@106E0000 { + gpv0: gpv0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv1: gpv1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv2: gpv2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv3: gpv3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv4: gpv4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm/dts/exynos4x12.dtsi b/arch/arm/dts/exynos4x12.dtsi new file mode 100644 index 0000000000..5d58c6eedc --- /dev/null +++ b/arch/arm/dts/exynos4x12.dtsi @@ -0,0 +1,115 @@ +/* + * Samsung's Exynos4x12 SoCs device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as +` * published by the Free Software Foundation. +*/ + +#include "exynos4.dtsi" +#include "exynos4x12-pinctrl.dtsi" +#include "exynos4x12-pinctrl-uboot.dtsi" + +/ { + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + mshc0 = &mshc_0; + }; + + pd_isp: isp-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + }; + + clock: clock-controller@10030000 { + compatible = "samsung,exynos4412-clock"; + reg = <0x10030000 0x20000>; + #clock-cells = <1>; + }; + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>; + clocks = <&clock 3>, <&clock 344>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &combiner 12 5>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 1 12 0>; + }; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; + }; + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <0 46 0>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_2: pinctrl@03860000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x03860000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 0>; + }; + + pinctrl_3: pinctrl@106E0000 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x106E0000 0x1000>; + interrupts = <0 72 0>; + }; + + g2d@10800000 { + compatible = "samsung,exynos4212-g2d"; + reg = <0x10800000 0x1000>; + interrupts = <0 89 0>; + clocks = <&clock 177>, <&clock 277>; + clock-names = "sclk_fimg2d", "fimg2d"; + status = "disabled"; + }; + + mshc_0: mmc@12550000 { + compatible = "samsung,exynos4412-dw-mshc"; + reg = <0x12550000 0x1000>; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + fifo-depth = <0x80>; + clocks = <&clock 301>, <&clock 149>; + clock-names = "biu", "ciu"; + status = "disabled"; + }; +}; diff --git a/arch/arm/dts/exynos5.dtsi b/arch/arm/dts/exynos5.dtsi index a2b533a136..e53906892c 100644 --- a/arch/arm/dts/exynos5.dtsi +++ b/arch/arm/dts/exynos5.dtsi @@ -5,11 +5,38 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "samsung,exynos5"; + combiner: interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + samsung,combiner-nr = <32>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + sromc@12250000 { compatible = "samsung,exynos-sromc"; reg = <0x12250000 0x20>; @@ -17,6 +44,33 @@ #size-cells = <0>; }; + combiner: interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + samsung,combiner-nr = <32>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + }; + + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + i2c@12c60000 { #address-cells = <1>; #size-cells = <0>; @@ -190,6 +244,7 @@ compatible = "samsung,exynos4210-uart"; reg = <0x12C30000 0x100>; interrupts = <0 54 0>; + u-boot,dm-pre-reloc; id = <3>; }; diff --git a/arch/arm/dts/exynos5250-pinctrl-uboot.dtsi b/arch/arm/dts/exynos5250-pinctrl-uboot.dtsi new file mode 100644 index 0000000000..7edb0ca290 --- /dev/null +++ b/arch/arm/dts/exynos5250-pinctrl-uboot.dtsi @@ -0,0 +1,40 @@ +/* + * U-Boot additions to enable a generic Exynos GPIO driver + * + * Copyright (c) 2014 Google, Inc + */ + +/{ + pinctrl_0: pinctrl@11400000 { + #address-cells = <1>; + #size-cells = <0>; + gpc4: gpc4 { + reg = <0x2e0>; + }; + gpx0: gpx0 { + reg = <0xc00>; + }; + }; + + pinctrl_1: pinctrl@13400000 { + #address-cells = <1>; + #size-cells = <0>; + }; + + pinctrl_2: pinctrl@10d10000 { + #address-cells = <1>; + #size-cells = <0>; + gpv2: gpv2 { + reg = <0x060>; + }; + gpv4: gpv4 { + reg = <0xc0>; + }; + }; + + pinctrl_3: pinctrl@03860000 { + #address-cells = <1>; + #size-cells = <0>; + }; + +}; diff --git a/arch/arm/dts/exynos5250-pinctrl.dtsi b/arch/arm/dts/exynos5250-pinctrl.dtsi new file mode 100644 index 0000000000..67755a1e08 --- /dev/null +++ b/arch/arm/dts/exynos5250-pinctrl.dtsi @@ -0,0 +1,331 @@ +/* + * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc4: gpc4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <23 0>, <24 0>, <25 0>, <25 1>, + <26 0>, <26 1>, <27 0>, <27 1>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <28 0>, <28 1>, <29 0>, <29 1>, + <30 0>, <30 1>, <31 0>, <31 1>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pinctrl@13400000 { + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pinctrl@10d10000 { + gpv0: gpv0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv1: gpv1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv2: gpv2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv3: gpv3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv4: gpv4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; +}; diff --git a/arch/arm/dts/exynos5250-smdk5250.dts b/arch/arm/dts/exynos5250-smdk5250.dts index 9020382d97..885040920c 100644 --- a/arch/arm/dts/exynos5250-smdk5250.dts +++ b/arch/arm/dts/exynos5250-smdk5250.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" +#include "exynos5250.dtsi" / { model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts index ab4f2f8581..6fd9275c4e 100644 --- a/arch/arm/dts/exynos5250-snow.dts +++ b/arch/arm/dts/exynos5250-snow.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "exynos5250.dtsi" +#include "exynos5250.dtsi" / { model = "Google Snow"; @@ -53,6 +53,14 @@ }; }; + spi@12d30000 { + spi-max-frequency = <50000000>; + firmware_storage_spi: flash@0 { + compatible = "spi-flash"; + reg = <0>; + }; + }; + spi@131b0000 { spi-max-frequency = <1000000>; spi-deactivate-delay = <100>; diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi index 0c644e7cac..ccbafe9b07 100644 --- a/arch/arm/dts/exynos5250.dtsi +++ b/arch/arm/dts/exynos5250.dtsi @@ -5,9 +5,48 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/include/ "exynos5.dtsi" +#include "exynos5.dtsi" +#include "exynos5250-pinctrl.dtsi" +#include "exynos5250-pinctrl-uboot.dtsi" / { + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 46 0>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_1: pinctrl@13400000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x13400000 0x1000>; + interrupts = <0 45 0>; + }; + + pinctrl_2: pinctrl@10d10000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x10d10000 0x1000>; + interrupts = <0 50 0>; + }; + + pinctrl_3: pinctrl@03860000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x03860000 0x1000>; + interrupts = <0 47 0>; + }; + i2c@12ca0000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/dts/exynos5420-peach-pit.dts b/arch/arm/dts/exynos5420-peach-pit.dts index 995e62b337..fde863de3c 100644 --- a/arch/arm/dts/exynos5420-peach-pit.dts +++ b/arch/arm/dts/exynos5420-peach-pit.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "exynos54xx.dtsi" +#include "exynos54xx.dtsi" / { model = "Samsung/Google Peach Pit board based on Exynos5420"; @@ -140,6 +140,7 @@ spi@12d30000 { /* spi1 */ spi-max-frequency = <50000000>; firmware_storage_spi: flash@0 { + compatible = "spi-flash"; reg = <0>; /* diff --git a/arch/arm/dts/exynos5420-smdk5420.dts b/arch/arm/dts/exynos5420-smdk5420.dts index 1bc6256283..6855027389 100644 --- a/arch/arm/dts/exynos5420-smdk5420.dts +++ b/arch/arm/dts/exynos5420-smdk5420.dts @@ -8,7 +8,7 @@ */ /dts-v1/; -/include/ "exynos54xx.dtsi" +#include "exynos54xx.dtsi" / { model = "SAMSUNG SMDK5420 board based on EXYNOS5420"; diff --git a/arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi b/arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi new file mode 100644 index 0000000000..5a86211d4a --- /dev/null +++ b/arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi @@ -0,0 +1,40 @@ +/* + * U-Boot additions to enable a generic Exynos GPIO driver + * + * Copyright (c) 2014 Google, Inc + */ + +/{ + /* + * Replicate the ordering of arch/arm/include/asm/arch-exynos/gpio.h + * TODO(sjg@chromium.org): This ordering ceases to matter once GPIO + * numbers are not needed in U-Boot for exynos. + */ + pinctrl@14010000 { + #address-cells = <1>; + #size-cells = <0>; + }; + pinctrl@13400000 { + #address-cells = <1>; + #size-cells = <0>; + gpy7 { + }; + + gpx0 { + reg = <0xc00>; + }; + }; + pinctrl@13410000 { + #address-cells = <1>; + #size-cells = <0>; + }; + pinctrl@14000000 { + #address-cells = <1>; + #size-cells = <0>; + }; + pinctrl@03860000 { + #address-cells = <1>; + #size-cells = <0>; + }; + +}; diff --git a/arch/arm/dts/exynos54xx-pinctrl.dtsi b/arch/arm/dts/exynos54xx-pinctrl.dtsi new file mode 100644 index 0000000000..775d956a5f --- /dev/null +++ b/arch/arm/dts/exynos54xx-pinctrl.dtsi @@ -0,0 +1,305 @@ +/* + * Samsung's Exynos5420 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "exynos54xx-pinctrl-uboot.dtsi" + +/ { + pinctrl@13400000 { + gpy7: gpy7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <23 0>, <24 0>, <25 0>, <25 1>, + <26 0>, <26 1>, <27 0>, <27 1>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <28 0>, <28 1>, <29 0>, <29 1>, + <30 0>, <30 1>, <31 0>, <31 1>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pinctrl@13410000 { + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc4: gpc4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + }; + + pinctrl@14000000 { + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pinctrl@14010000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb4: gpb4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; + + pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + }; +}; diff --git a/arch/arm/dts/exynos54xx.dtsi b/arch/arm/dts/exynos54xx.dtsi index c21d798a23..916cf3a5b6 100644 --- a/arch/arm/dts/exynos54xx.dtsi +++ b/arch/arm/dts/exynos54xx.dtsi @@ -5,7 +5,8 @@ * SPDX-License-Identifier: GPL-2.0+ */ -/include/ "exynos5.dtsi" +#include "exynos5.dtsi" +#include "exynos54xx-pinctrl.dtsi" / { config { @@ -24,6 +25,11 @@ i2c8 = "/i2c@12e00000"; i2c9 = "/i2c@12e10000"; i2c10 = "/i2c@12e20000"; + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + pinctrl4 = &pinctrl_4; spi0 = "/spi@12d20000"; spi1 = "/spi@12d30000"; spi2 = "/spi@12d40000"; @@ -123,6 +129,42 @@ reg = <0x14680000 0x100>; }; + pinctrl_0: pinctrl@13400000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x13400000 0x1000>; + interrupts = <0 45 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_1: pinctrl@13410000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x13410000 0x1000>; + interrupts = <0 78 0>; + }; + + pinctrl_2: pinctrl@14000000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x14000000 0x1000>; + interrupts = <0 46 0>; + }; + + pinctrl_3: pinctrl@14010000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x14010000 0x1000>; + interrupts = <0 50 0>; + }; + + pinctrl_4: pinctrl@03860000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x03860000 0x1000>; + interrupts = <0 47 0>; + }; + fimd@14400000 { /* sysmmu is not used in U-Boot */ samsung,disable-sysmmu; diff --git a/arch/arm/dts/s5pc100-pinctrl.dtsi b/arch/arm/dts/s5pc100-pinctrl.dtsi new file mode 100644 index 0000000000..bd9f97c97b --- /dev/null +++ b/arch/arm/dts/s5pc100-pinctrl.dtsi @@ -0,0 +1,180 @@ +/* + * U-Boot additions to enable a generic Exynos GPIO driver + * + * Copyright (c) 2014 Google, Inc + */ + +/ { + pinctrl@e0300000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc: gpc { + gpio-controller; + #gpio-cells = <2>; + }; + + gpd: gpd { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpi: gpi { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj2: gpj2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj3: gpj3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl3: gpl3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpl4: gpl4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph2: gph2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph3: gph3 { + gpio-controller; + #gpio-cells = <2>; + }; + + }; +}; diff --git a/arch/arm/dts/s5pc110-pinctrl.dtsi b/arch/arm/dts/s5pc110-pinctrl.dtsi new file mode 100644 index 0000000000..d21b6ab756 --- /dev/null +++ b/arch/arm/dts/s5pc110-pinctrl.dtsi @@ -0,0 +1,273 @@ +/* + * U-Boot additions to enable a generic Exynos GPIO driver + * + * Copyright (c) 2014 Google, Inc + */ + +/ { + pinctrl@e0200000 { + #address-cells = <1>; + #size-cells = <0>; + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpi: gpi { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj2: gpj2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj3: gpj3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp01: gpmp01 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp02: gpmp02 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp03: gpmp03 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp04: gpmp04 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp05: gpmp05 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp06: gpmp06 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp07: gpmp07 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp10: gpmp10 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp11: gpmp11 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp12: gpmp12 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp13: gpmp13 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp14: gpmp14 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp15: gpmp15 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp16: gpmp16 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp17: gpmp17 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp18: gpmp18 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp20: gpmp20 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp21: gpmp21 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp22: gpmp22 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp23: gpmp23 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp24: gpmp24 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp25: gpmp25 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp26: gpmp26 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp27: gpmp27 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpmp28: gpmp28 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph0: gph0 { + reg = <0xc00>; + gpio-controller; + #gpio-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph2: gph2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph3: gph3 { + gpio-controller; + #gpio-cells = <2>; + }; + + }; +}; diff --git a/arch/arm/dts/s5pc1xx-goni.dts b/arch/arm/dts/s5pc1xx-goni.dts index 2e671bbf7e..7bbfe591cd 100644 --- a/arch/arm/dts/s5pc1xx-goni.dts +++ b/arch/arm/dts/s5pc1xx-goni.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "skeleton.dtsi" +#include "s5pc110-pinctrl.dtsi" / { model = "Samsung Goni based on S5PC110"; @@ -17,6 +18,12 @@ aliases { serial2 = "/serial@e2900800"; console = "/serial@e2900800"; + pinctrl0 = &pinctrl0; + }; + + pinctrl0: pinctrl@e0200000 { + compatible = "samsung,s5pc110-pinctrl"; + reg = <0xe0200000 0x1000>; }; serial@e2900800 { diff --git a/arch/arm/dts/s5pc1xx-smdkc100.dts b/arch/arm/dts/s5pc1xx-smdkc100.dts index 42754ce811..95f15ed48d 100644 --- a/arch/arm/dts/s5pc1xx-smdkc100.dts +++ b/arch/arm/dts/s5pc1xx-smdkc100.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "skeleton.dtsi" +#include "s5pc100-pinctrl.dtsi" / { model = "Samsung SMDKC100 based on S5PC100"; @@ -17,6 +18,12 @@ aliases { serial0 = "/serial@ec000000"; console = "/serial@ec000000"; + pinctrl0 = &pinctrl0; + }; + + pinctrl0: pinctrl@e0300000 { + compatible = "samsung,s5pc100-pinctrl"; + reg = <0xe0200000 0x1000>; }; serial@ec000000 { diff --git a/arch/arm/dts/tegra20-trimslice.dts b/arch/arm/dts/tegra20-trimslice.dts index cee5cfe0d2..74e8a16280 100644 --- a/arch/arm/dts/tegra20-trimslice.dts +++ b/arch/arm/dts/tegra20-trimslice.dts @@ -15,6 +15,7 @@ usb1 = "/usb@c5000000"; sdhci0 = "/sdhci@c8000600"; sdhci1 = "/sdhci@c8000000"; + spi0 = "/spi@7000c380"; }; memory { diff --git a/arch/arm/dts/tegra30-apalis.dts b/arch/arm/dts/tegra30-apalis.dts new file mode 100644 index 0000000000..5bad3e7769 --- /dev/null +++ b/arch/arm/dts/tegra30-apalis.dts @@ -0,0 +1,304 @@ +/dts-v1/; + +#include "tegra30.dtsi" + +/ { + model = "Toradex Apalis T30"; + compatible = "toradex,apalis_t30", "nvidia,tegra30"; + + chosen { + stdout-path = &uarta; + }; + + aliases { + i2c0 = "/i2c@7000d000"; + i2c1 = "/i2c@7000c000"; + i2c2 = "/i2c@7000c500"; + i2c3 = "/i2c@7000c700"; + sdhci0 = "/sdhci@78000600"; + sdhci1 = "/sdhci@78000400"; + sdhci2 = "/sdhci@78000000"; + usb0 = "/usb@7d000000"; + usb1 = "/usb@7d004000"; + usb2 = "/usb@7d008000"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + pcie-controller@00003000 { + status = "okay"; + avdd-pexa-supply = <&vdd2_reg>; + vdd-pexa-supply = <&vdd2_reg>; + avdd-pexb-supply = <&vdd2_reg>; + vdd-pexb-supply = <&vdd2_reg>; + avdd-pex-pll-supply = <&vdd2_reg>; + avdd-plle-supply = <&ldo6_reg>; + vddio-pex-ctl-supply = <&sys_3v3_reg>; + hvdd-pex-supply = <&sys_3v3_reg>; + + pci@1,0 { + nvidia,num-lanes = <4>; + }; + + pci@2,0 { + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + status = "okay"; + nvidia,num-lanes = <1>; + }; + }; + + /* + * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* GEN2_I2C: unused */ + + /* + * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on + * carrier board) + */ + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */ + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&sys_3v3_reg>; + vcc2-supply = <&sys_3v3_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&sys_3v3_reg>; + vcc5-supply = <&sys_3v3_reg>; + vcc6-supply = <&vio_reg>; + vcc7-supply = <&charge_pump_5v0_reg>; + vccio-supply = <&sys_3v3_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + /* SW1: +V1.35_VDDIO_DDR */ + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + /* SW2: +V1.05 */ + vdd2_reg: vdd2 { + regulator-name = + "vdd_pexa,vdd_pexb,vdd_sata"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* SW CTRL: +V1.0_VDD_CPU */ + vddctrl_reg: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + }; + + /* SWIO: +V1.8 */ + vio_reg: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* LDO1: unused */ + + /* + * EN_+V3.3 switching via FET: + * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN + * see also v3_3 fixed supply + */ + ldo2_reg: ldo2 { + regulator-name = "en_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* +V1.2_CSI */ + ldo3_reg: ldo3 { + regulator-name = + "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* +V1.2_VDD_RTC */ + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* + * +V2.8_AVDD_VDAC: + * only required for analog RGB + */ + ldo5_reg: ldo5 { + regulator-name = "avdd_vdac"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + /* + * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V + * but LDO6 can't set voltage in 50mV + * granularity + */ + ldo6_reg: ldo6 { + regulator-name = "avdd_plle"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + /* +V1.2_AVDD_PLL */ + ldo7_reg: ldo7 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* +V1.0_VDD_DDR_HS */ + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + }; + + /* SPI1: Apalis SPI1 */ + spi@7000d400 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + /* SPI4: CAN2 */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + /* SPI5: Apalis SPI2 */ + spi@7000dc00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + /* SPI6: CAN1 */ + spi@7000de00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + sdhci@78000000 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio 229 1>; /* PCC5, SD1_CD# */ + }; + + sdhci@78000400 { + status = "okay"; + bus-width = <8>; + cd-gpios = <&gpio 171 1>; /* PV3, MMC1_CD# */ + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ + usb@7d000000 { + status = "okay"; + dr_mode = "peripheral"; + nvidia,vbus-gpio = <&gpio 157 0>; /* PT5, USBO1_EN */ + }; + + /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ + usb@7d004000 { + status = "okay"; + nvidia,vbus-gpio = <&gpio 233 0>; /* PDD1, USBH_EN */ + phy_type = "utmi"; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ + usb@7d008000 { + status = "okay"; + nvidia,vbus-gpio = <&gpio 233 0>; /* PDD1, USBH_EN */ + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sys_3v3_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + charge_pump_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/dts/tegra30-beaver.dts b/arch/arm/dts/tegra30-beaver.dts index ad140def95..9acd84d802 100644 --- a/arch/arm/dts/tegra30-beaver.dts +++ b/arch/arm/dts/tegra30-beaver.dts @@ -18,6 +18,7 @@ i2c4 = "/i2c@7000c700"; sdhci0 = "/sdhci@78000600"; sdhci1 = "/sdhci@78000000"; + spi0 = "/spi@7000da00"; usb0 = "/usb@7d000000"; usb1 = "/usb@7d008000"; }; diff --git a/arch/arm/dts/tegra30-cardhu.dts b/arch/arm/dts/tegra30-cardhu.dts index b4fbe71aa5..1b8ed737e0 100644 --- a/arch/arm/dts/tegra30-cardhu.dts +++ b/arch/arm/dts/tegra30-cardhu.dts @@ -18,6 +18,7 @@ i2c4 = "/i2c@7000c700"; sdhci0 = "/sdhci@78000600"; sdhci1 = "/sdhci@78000000"; + spi0 = "/spi@7000da00"; usb0 = "/usb@7d008000"; }; diff --git a/arch/arm/dts/tegra30-colibri.dts b/arch/arm/dts/tegra30-colibri.dts index 43d03ca4fa..572520a00e 100644 --- a/arch/arm/dts/tegra30-colibri.dts +++ b/arch/arm/dts/tegra30-colibri.dts @@ -6,12 +6,17 @@ model = "Toradex Colibri T30"; compatible = "toradex,colibri_t30", "nvidia,tegra30"; + chosen { + stdout-path = &uarta; + }; + aliases { i2c0 = "/i2c@7000d000"; i2c1 = "/i2c@7000c000"; i2c2 = "/i2c@7000c700"; sdhci0 = "/sdhci@78000600"; sdhci1 = "/sdhci@78000200"; + spi0 = "/spi@7000d400"; usb0 = "/usb@7d000000"; usb1 = "/usb@7d004000"; /* on module only, for ASIX */ usb2 = "/usb@7d008000"; diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index ed826a0e19..09fc22760d 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -7,7 +7,9 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#include <bootm.h> #include <common.h> +#include <netdev.h> #include <asm/errno.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> diff --git a/arch/arm/imx-common/i2c-mxv7.c b/arch/arm/imx-common/i2c-mxv7.c index a58087399c..34f53872e8 100644 --- a/arch/arm/imx-common/i2c-mxv7.c +++ b/arch/arm/imx-common/i2c-mxv7.c @@ -4,6 +4,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <malloc.h> #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> #include <asm/errno.h> @@ -69,15 +70,53 @@ static void * const i2c_bases[] = { }; /* i2c_index can be from 0 - 2 */ -void setup_i2c(unsigned i2c_index, int speed, int slave_addr, - struct i2c_pads_info *p) +int setup_i2c(unsigned i2c_index, int speed, int slave_addr, + struct i2c_pads_info *p) { + char *name1, *name2; + int ret; + if (i2c_index >= ARRAY_SIZE(i2c_bases)) - return; + return -EINVAL; + + name1 = malloc(9); + name2 = malloc(9); + if (!name1 || !name2) + return -ENOMEM; + + sprintf(name1, "i2c_sda%d", i2c_index); + sprintf(name2, "i2c_scl%d", i2c_index); + ret = gpio_request(p->sda.gp, name1); + if (ret) + goto err_req1; + + ret = gpio_request(p->scl.gp, name2); + if (ret) + goto err_req2; + /* Enable i2c clock */ - enable_i2c_clk(1, i2c_index); + ret = enable_i2c_clk(1, i2c_index); + if (ret) + goto err_clk; + /* Make sure bus is idle */ - force_idle_bus(p); + ret = force_idle_bus(p); + if (ret) + goto err_idle; + bus_i2c_init(i2c_bases[i2c_index], speed, slave_addr, force_idle_bus, p); + + return 0; + +err_idle: +err_clk: + gpio_free(p->scl.gp); +err_req2: + gpio_free(p->sda.gp); +err_req1: + free(name1); + free(name2); + + return ret; } diff --git a/arch/arm/imx-common/misc.c b/arch/arm/imx-common/misc.c index dbecf4e434..12256a38eb 100644 --- a/arch/arm/imx-common/misc.c +++ b/arch/arm/imx-common/misc.c @@ -5,6 +5,7 @@ */ #include <common.h> +#include <asm/arch/sys_proto.h> #include <asm/errno.h> #include <asm/io.h> #include <asm/imx-common/regs-common.h> diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h index 3249437263..d8bf87258b 100644 --- a/arch/arm/include/asm/arch-am33xx/mux.h +++ b/arch/arm/include/asm/arch-am33xx/mux.h @@ -36,7 +36,7 @@ struct module_pin_mux { /* Pad control register offset */ #define PAD_CTRL_BASE 0x800 -#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \ +#define OFFSET(x) (unsigned int) (&((struct pad_signals *)\ (PAD_CTRL_BASE))->x) /* diff --git a/arch/arm/include/asm/arch-armada-xp/config.h b/arch/arm/include/asm/arch-armada-xp/config.h new file mode 100644 index 0000000000..00ee775a45 --- /dev/null +++ b/arch/arm/include/asm/arch-armada-xp/config.h @@ -0,0 +1,82 @@ +/* + * (C) Copyright 2011 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Lei Wen <leiwen@marvell.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * This file should be included in board config header file. + * + * It supports common definitions for Armada XP platforms + */ + +#ifndef _ARMADA_XP_CONFIG_H +#define _ARMADA_XP_CONFIG_H + +#include <asm/arch/soc.h> + +#define MV88F78X60 /* for the DDR training bin_hdr code */ + +#define CONFIG_SYS_CACHELINE_SIZE 32 + +/* + * By default kwbimage.cfg from board specific folder is used + * If for some board, different configuration file need to be used, + * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file + */ +#ifndef CONFIG_SYS_KWD_CONFIG +#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg +#endif /* CONFIG_SYS_KWD_CONFIG */ + +/* Add target to build it automatically upon "make" */ +#define CONFIG_BUILD_TARGET "u-boot.kwb" + +/* end of 16M scrubbed by training in bootrom */ +#define CONFIG_SYS_INIT_SP_ADDR 0x00FF0000 +#define CONFIG_NR_DRAM_BANKS_MAX 2 + +#define MV_UART_CONSOLE_BASE MVEBU_UART0_BASE + +/* + * SPI Flash configuration + */ +#ifdef CONFIG_CMD_SF +#define CONFIG_HARD_SPI 1 +#define CONFIG_KIRKWOOD_SPI 1 +#ifndef CONFIG_ENV_SPI_BUS +# define CONFIG_ENV_SPI_BUS 0 +#endif +#ifndef CONFIG_ENV_SPI_CS +# define CONFIG_ENV_SPI_CS 0 +#endif +#ifndef CONFIG_ENV_SPI_MAX_HZ +# define CONFIG_ENV_SPI_MAX_HZ 50000000 +#endif +#endif + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_MII /* expose smi ove miiphy interface */ +#define CONFIG_MVNETA /* Enable Marvell Gbe Controller Driver */ +#define CONFIG_PHYLIB +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ +#define CONFIG_PHY_GIGE /* GbE speed/duplex detect */ +#endif /* CONFIG_CMD_NET */ + +/* + * I2C related stuff + */ +#ifdef CONFIG_CMD_I2C +#ifndef CONFIG_SYS_I2C_SOFT +#define CONFIG_I2C_MVTWSI +#endif +#define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_SYS_I2C_SPEED 100000 +#endif + +#endif /* _ARMADA_XP_CONFIG_H */ diff --git a/arch/arm/include/asm/arch-armada-xp/cpu.h b/arch/arm/include/asm/arch-armada-xp/cpu.h new file mode 100644 index 0000000000..6b60c21ceb --- /dev/null +++ b/arch/arm/include/asm/arch-armada-xp/cpu.h @@ -0,0 +1,107 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ARMADA_XP_CPU_H +#define _ARMADA_XP_CPU_H + +#include <asm/system.h> + +#ifndef __ASSEMBLY__ + +#define MVEBU_REG_PCIE_DEVID (MVEBU_REG_PCIE_BASE + 0x00) +#define MVEBU_REG_PCIE_REVID (MVEBU_REG_PCIE_BASE + 0x08) + +enum memory_bank { + BANK0, + BANK1, + BANK2, + BANK3 +}; + +enum cpu_winen { + CPU_WIN_DISABLE, + CPU_WIN_ENABLE +}; + +enum cpu_target { + CPU_TARGET_DRAM = 0x0, + CPU_TARGET_DEVICEBUS_BOOTROM_SPI = 0x1, + CPU_TARGET_ETH23 = 0x3, + CPU_TARGET_PCIE02 = 0x4, + CPU_TARGET_ETH01 = 0x7, + CPU_TARGET_PCIE13 = 0x8, + CPU_TARGET_SASRAM = 0x9, + CPU_TARGET_NAND = 0xd, +}; + +enum cpu_attrib { + CPU_ATTR_SASRAM = 0x01, + CPU_ATTR_DRAM_CS0 = 0x0e, + CPU_ATTR_DRAM_CS1 = 0x0d, + CPU_ATTR_DRAM_CS2 = 0x0b, + CPU_ATTR_DRAM_CS3 = 0x07, + CPU_ATTR_NANDFLASH = 0x2f, + CPU_ATTR_SPIFLASH = 0x1e, + CPU_ATTR_BOOTROM = 0x1d, + CPU_ATTR_PCIE_IO = 0xe0, + CPU_ATTR_PCIE_MEM = 0xe8, + CPU_ATTR_DEV_CS0 = 0x3e, + CPU_ATTR_DEV_CS1 = 0x3d, + CPU_ATTR_DEV_CS2 = 0x3b, + CPU_ATTR_DEV_CS3 = 0x37, +}; + +/* + * Default Device Address MAP BAR values + */ +#define DEFADR_PCI_MEM 0x90000000 +#define DEFADR_PCI_IO 0xC0000000 +#define DEFADR_SPIF 0xF4000000 +#define DEFADR_BOOTROM 0xF8000000 + +struct mbus_win { + u32 base; + u32 size; + u8 target; + u8 attr; +}; + +/* + * System registers + * Ref: Datasheet sec:A.28 + */ +struct mvebu_system_registers { + u8 pad1[0x60]; + u32 rstoutn_mask; /* 0x60 */ + u32 sys_soft_rst; /* 0x64 */ +}; + +/* + * GPIO Registers + * Ref: Datasheet sec:A.19 + */ +struct kwgpio_registers { + u32 dout; + u32 oe; + u32 blink_en; + u32 din_pol; + u32 din; + u32 irq_cause; + u32 irq_mask; + u32 irq_level; +}; + +/* + * functions + */ +unsigned int mvebu_sdram_bar(enum memory_bank bank); +unsigned int mvebu_sdram_bs(enum memory_bank bank); +void mvebu_sdram_size_adjust(enum memory_bank bank); +int mvebu_mbus_probe(struct mbus_win windows[], int count); +#endif /* __ASSEMBLY__ */ +#endif /* _ARMADA_XP_CPU_H */ diff --git a/arch/arm/include/asm/arch-armada-xp/soc.h b/arch/arm/include/asm/arch-armada-xp/soc.h new file mode 100644 index 0000000000..963e7ac5b7 --- /dev/null +++ b/arch/arm/include/asm/arch-armada-xp/soc.h @@ -0,0 +1,57 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * Header file for the Marvell's Feroceon CPU core. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARCH_ARMADA_XP_H +#define _ASM_ARCH_ARMADA_XP_H + +#define SOC_MV78460_ID 0x7846 + +/* TCLK Core Clock definition */ +#ifndef CONFIG_SYS_TCLK +#define CONFIG_SYS_TCLK 250000000 /* 250MHz */ +#endif + +/* SOC specific definations */ +#define INTREG_BASE 0xd0000000 +#define INTREG_BASE_ADDR_REG (INTREG_BASE + 0x20080) +#define SOC_REGS_PHY_BASE 0xf1000000 +#define MVEBU_REGISTER(x) (SOC_REGS_PHY_BASE + x) + +#define MVEBU_SDRAM_SCRATCH (MVEBU_REGISTER(0x01504)) +#define MVEBU_SPI_BASE (MVEBU_REGISTER(0x10600)) +#define MVEBU_TWSI_BASE (MVEBU_REGISTER(0x11000)) +#define MVEBU_UART0_BASE (MVEBU_REGISTER(0x12000)) +#define MVEBU_UART1_BASE (MVEBU_REGISTER(0x12100)) +#define MVEBU_MPP_BASE (MVEBU_REGISTER(0x18000)) +#define MVEBU_GPIO0_BASE (MVEBU_REGISTER(0x18100)) +#define MVEBU_GPIO1_BASE (MVEBU_REGISTER(0x18140)) +#define MVEBU_GPIO2_BASE (MVEBU_REGISTER(0x18180)) +#define MVEBU_SYSTEM_REG_BASE (MVEBU_REGISTER(0x18200)) +#define MVEBU_CPU_WIN_BASE (MVEBU_REGISTER(0x20000)) +#define MVEBU_SDRAM_BASE (MVEBU_REGISTER(0x20180)) +#define MVEBU_TIMER_BASE (MVEBU_REGISTER(0x20300)) +#define MVEBU_EGIGA2_BASE (MVEBU_REGISTER(0x30000)) +#define MVEBU_EGIGA3_BASE (MVEBU_REGISTER(0x34000)) +#define MVEBU_REG_PCIE_BASE (MVEBU_REGISTER(0x40000)) +#define MVEBU_EGIGA0_BASE (MVEBU_REGISTER(0x70000)) +#define MVEBU_EGIGA1_BASE (MVEBU_REGISTER(0x74000)) + +#define SDRAM_MAX_CS 4 +#define SDRAM_ADDR_MASK 0xFF000000 + +/* Armada XP GbE controller has 4 ports */ +#define MAX_MVNETA_DEVS 4 + +/* Kirkwood CPU memory windows */ +#define MVCPU_WIN_CTRL_DATA CPU_WIN_CTRL_DATA +#define MVCPU_WIN_ENABLE CPU_WIN_ENABLE +#define MVCPU_WIN_DISABLE CPU_WIN_DISABLE + +#endif /* _ASM_ARCH_ARMADA_XP_H */ diff --git a/arch/arm/include/asm/arch-bcm2835/gpio.h b/arch/arm/include/asm/arch-bcm2835/gpio.h index 9a49b6e05e..db42896201 100644 --- a/arch/arm/include/asm/arch-bcm2835/gpio.h +++ b/arch/arm/include/asm/arch-bcm2835/gpio.h @@ -52,4 +52,13 @@ struct bcm2835_gpio_regs { u32 gppudclk[2]; }; +/** + * struct bcm2835_gpio_platdata - GPIO platform description + * + * @base: Base address of GPIO controller + */ +struct bcm2835_gpio_platdata { + unsigned long base; +}; + #endif /* _BCM2835_GPIO_H_ */ diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h index dded857c3a..61f427d914 100644 --- a/arch/arm/include/asm/arch-bcm2835/mbox.h +++ b/arch/arm/include/asm/arch-bcm2835/mbox.h @@ -119,6 +119,20 @@ struct bcm2835_mbox_tag_hdr { * }; */ +#define BCM2835_MBOX_TAG_GET_MAC_ADDRESS 0x00010003 + +struct bcm2835_mbox_tag_get_mac_address { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + } req; + struct { + u8 mac[6]; + u8 pad[2]; + } resp; + } body; +}; + #define BCM2835_MBOX_TAG_GET_ARM_MEMORY 0x00010005 struct bcm2835_mbox_tag_get_arm_mem { diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index 8fb5c2321e..ad2ece64f4 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -284,7 +284,7 @@ enum exynos4_gpio_pin { EXYNOS4_GPIO_Y65, EXYNOS4_GPIO_Y66, EXYNOS4_GPIO_Y67, - EXYNOS4_GPIO_X00 = 896, /* 896 0x380 */ + EXYNOS4_GPIO_X00, /* 256 0x100 */ EXYNOS4_GPIO_X01, EXYNOS4_GPIO_X02, EXYNOS4_GPIO_X03, @@ -292,7 +292,7 @@ enum exynos4_gpio_pin { EXYNOS4_GPIO_X05, EXYNOS4_GPIO_X06, EXYNOS4_GPIO_X07, - EXYNOS4_GPIO_X10, /* 904 0x388 */ + EXYNOS4_GPIO_X10, /* 264 0x108 */ EXYNOS4_GPIO_X11, EXYNOS4_GPIO_X12, EXYNOS4_GPIO_X13, @@ -300,7 +300,7 @@ enum exynos4_gpio_pin { EXYNOS4_GPIO_X15, EXYNOS4_GPIO_X16, EXYNOS4_GPIO_X17, - EXYNOS4_GPIO_X20, /* 912 0x390 */ + EXYNOS4_GPIO_X20, /* 272 0x110 */ EXYNOS4_GPIO_X21, EXYNOS4_GPIO_X22, EXYNOS4_GPIO_X23, @@ -308,7 +308,7 @@ enum exynos4_gpio_pin { EXYNOS4_GPIO_X25, EXYNOS4_GPIO_X26, EXYNOS4_GPIO_X27, - EXYNOS4_GPIO_X30, /* 920 0x398 */ + EXYNOS4_GPIO_X30, /* 280 0x118 */ EXYNOS4_GPIO_X31, EXYNOS4_GPIO_X32, EXYNOS4_GPIO_X33, @@ -318,7 +318,7 @@ enum exynos4_gpio_pin { EXYNOS4_GPIO_X37, /* GPIO_PART3_STARTS */ - EXYNOS4_GPIO_MAX_PORT_PART_2, /* 928 0x3A0 */ + EXYNOS4_GPIO_MAX_PORT_PART_2, /* 288 0x120 */ EXYNOS4_GPIO_Z0 = EXYNOS4_GPIO_MAX_PORT_PART_2, EXYNOS4_GPIO_Z1, EXYNOS4_GPIO_Z2, @@ -389,7 +389,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_D15, EXYNOS4X12_GPIO_D16, EXYNOS4X12_GPIO_D17, - EXYNOS4X12_GPIO_F00 = 96, /* 96 0x60 */ + EXYNOS4X12_GPIO_F00, /* 56 0x38 */ EXYNOS4X12_GPIO_F01, EXYNOS4X12_GPIO_F02, EXYNOS4X12_GPIO_F03, @@ -397,7 +397,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_F05, EXYNOS4X12_GPIO_F06, EXYNOS4X12_GPIO_F07, - EXYNOS4X12_GPIO_F10, /* 104 0x68 */ + EXYNOS4X12_GPIO_F10, /* 64 0x40 */ EXYNOS4X12_GPIO_F11, EXYNOS4X12_GPIO_F12, EXYNOS4X12_GPIO_F13, @@ -405,7 +405,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_F15, EXYNOS4X12_GPIO_F16, EXYNOS4X12_GPIO_F17, - EXYNOS4X12_GPIO_F20, /* 112 0x70 */ + EXYNOS4X12_GPIO_F20, /* 72 0x48 */ EXYNOS4X12_GPIO_F21, EXYNOS4X12_GPIO_F22, EXYNOS4X12_GPIO_F23, @@ -413,7 +413,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_F25, EXYNOS4X12_GPIO_F26, EXYNOS4X12_GPIO_F27, - EXYNOS4X12_GPIO_F30, /* 120 0x78 */ + EXYNOS4X12_GPIO_F30, /* 80 0x50 */ EXYNOS4X12_GPIO_F31, EXYNOS4X12_GPIO_F32, EXYNOS4X12_GPIO_F33, @@ -421,7 +421,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_F35, EXYNOS4X12_GPIO_F36, EXYNOS4X12_GPIO_F37, - EXYNOS4X12_GPIO_J00 = 144, /* 144 0x90 */ + EXYNOS4X12_GPIO_J00, /* 88 0x58 */ EXYNOS4X12_GPIO_J01, EXYNOS4X12_GPIO_J02, EXYNOS4X12_GPIO_J03, @@ -429,7 +429,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_J05, EXYNOS4X12_GPIO_J06, EXYNOS4X12_GPIO_J07, - EXYNOS4X12_GPIO_J10, /* 152 0x98 */ + EXYNOS4X12_GPIO_J10, /* 96 0x60 */ EXYNOS4X12_GPIO_J11, EXYNOS4X12_GPIO_J12, EXYNOS4X12_GPIO_J13, @@ -439,8 +439,8 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_J17, /* GPIO_PART2_STARTS */ - EXYNOS4X12_GPIO_MAX_PORT_PART_1,/* 160 0xA0 */ - EXYNOS4X12_GPIO_K00 = 176, /* 176 0xB0 */ + EXYNOS4X12_GPIO_MAX_PORT_PART_1,/* 104 0x66 */ + EXYNOS4X12_GPIO_K00 = EXYNOS4X12_GPIO_MAX_PORT_PART_1, EXYNOS4X12_GPIO_K01, EXYNOS4X12_GPIO_K02, EXYNOS4X12_GPIO_K03, @@ -448,7 +448,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_K05, EXYNOS4X12_GPIO_K06, EXYNOS4X12_GPIO_K07, - EXYNOS4X12_GPIO_K10, /* 184 0xB8 */ + EXYNOS4X12_GPIO_K10, /* 112 0x70 */ EXYNOS4X12_GPIO_K11, EXYNOS4X12_GPIO_K12, EXYNOS4X12_GPIO_K13, @@ -456,7 +456,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_K15, EXYNOS4X12_GPIO_K16, EXYNOS4X12_GPIO_K17, - EXYNOS4X12_GPIO_K20, /* 192 0xC0 */ + EXYNOS4X12_GPIO_K20, /* 120 0x78 */ EXYNOS4X12_GPIO_K21, EXYNOS4X12_GPIO_K22, EXYNOS4X12_GPIO_K23, @@ -464,7 +464,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_K25, EXYNOS4X12_GPIO_K26, EXYNOS4X12_GPIO_K27, - EXYNOS4X12_GPIO_K30, /* 200 0xC8 */ + EXYNOS4X12_GPIO_K30, /* 128 0x80 */ EXYNOS4X12_GPIO_K31, EXYNOS4X12_GPIO_K32, EXYNOS4X12_GPIO_K33, @@ -472,7 +472,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_K35, EXYNOS4X12_GPIO_K36, EXYNOS4X12_GPIO_K37, - EXYNOS4X12_GPIO_L00, /* 208 0xD0 */ + EXYNOS4X12_GPIO_L00, /* 136 0x88 */ EXYNOS4X12_GPIO_L01, EXYNOS4X12_GPIO_L02, EXYNOS4X12_GPIO_L03, @@ -480,7 +480,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_L05, EXYNOS4X12_GPIO_L06, EXYNOS4X12_GPIO_L07, - EXYNOS4X12_GPIO_L10, /* 216 0xD8 */ + EXYNOS4X12_GPIO_L10, /* 144 0x90 */ EXYNOS4X12_GPIO_L11, EXYNOS4X12_GPIO_L12, EXYNOS4X12_GPIO_L13, @@ -488,7 +488,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_L15, EXYNOS4X12_GPIO_L16, EXYNOS4X12_GPIO_L17, - EXYNOS4X12_GPIO_L20, /* 224 0xE0 */ + EXYNOS4X12_GPIO_L20, /* 152 0x98 */ EXYNOS4X12_GPIO_L21, EXYNOS4X12_GPIO_L22, EXYNOS4X12_GPIO_L23, @@ -496,7 +496,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_L25, EXYNOS4X12_GPIO_L26, EXYNOS4X12_GPIO_L27, - EXYNOS4X12_GPIO_Y00, /* 232 0xE8 */ + EXYNOS4X12_GPIO_Y00, /* 160 0xa0 */ EXYNOS4X12_GPIO_Y01, EXYNOS4X12_GPIO_Y02, EXYNOS4X12_GPIO_Y03, @@ -504,7 +504,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_Y05, EXYNOS4X12_GPIO_Y06, EXYNOS4X12_GPIO_Y07, - EXYNOS4X12_GPIO_Y10, /* 240 0xF0 */ + EXYNOS4X12_GPIO_Y10, /* 168 0xa8 */ EXYNOS4X12_GPIO_Y11, EXYNOS4X12_GPIO_Y12, EXYNOS4X12_GPIO_Y13, @@ -512,7 +512,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_Y15, EXYNOS4X12_GPIO_Y16, EXYNOS4X12_GPIO_Y17, - EXYNOS4X12_GPIO_Y20, /* 248 0xF8 */ + EXYNOS4X12_GPIO_Y20, /* 176 0xb0 */ EXYNOS4X12_GPIO_Y21, EXYNOS4X12_GPIO_Y22, EXYNOS4X12_GPIO_Y23, @@ -520,7 +520,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_Y25, EXYNOS4X12_GPIO_Y26, EXYNOS4X12_GPIO_Y27, - EXYNOS4X12_GPIO_Y30, /* 256 0x100 */ + EXYNOS4X12_GPIO_Y30, /* 184 0xb8 */ EXYNOS4X12_GPIO_Y31, EXYNOS4X12_GPIO_Y32, EXYNOS4X12_GPIO_Y33, @@ -528,7 +528,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_Y35, EXYNOS4X12_GPIO_Y36, EXYNOS4X12_GPIO_Y37, - EXYNOS4X12_GPIO_Y40, /* 264 0x108 */ + EXYNOS4X12_GPIO_Y40, /* 192 0xc0 */ EXYNOS4X12_GPIO_Y41, EXYNOS4X12_GPIO_Y42, EXYNOS4X12_GPIO_Y43, @@ -536,7 +536,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_Y45, EXYNOS4X12_GPIO_Y46, EXYNOS4X12_GPIO_Y47, - EXYNOS4X12_GPIO_Y50, /* 272 0x110 */ + EXYNOS4X12_GPIO_Y50, /* 200 0xc8 */ EXYNOS4X12_GPIO_Y51, EXYNOS4X12_GPIO_Y52, EXYNOS4X12_GPIO_Y53, @@ -544,7 +544,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_Y55, EXYNOS4X12_GPIO_Y56, EXYNOS4X12_GPIO_Y57, - EXYNOS4X12_GPIO_Y60, /* 280 0x118 */ + EXYNOS4X12_GPIO_Y60, /* 208 0xd0 */ EXYNOS4X12_GPIO_Y61, EXYNOS4X12_GPIO_Y62, EXYNOS4X12_GPIO_Y63, @@ -552,7 +552,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_Y65, EXYNOS4X12_GPIO_Y66, EXYNOS4X12_GPIO_Y67, - EXYNOS4X12_GPIO_M00 = 312, /* 312 0xF0 */ + EXYNOS4X12_GPIO_M00, /* 216 0xd8 */ EXYNOS4X12_GPIO_M01, EXYNOS4X12_GPIO_M02, EXYNOS4X12_GPIO_M03, @@ -560,7 +560,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_M05, EXYNOS4X12_GPIO_M06, EXYNOS4X12_GPIO_M07, - EXYNOS4X12_GPIO_M10, /* 320 0xF8 */ + EXYNOS4X12_GPIO_M10, /* 224 0xe0 */ EXYNOS4X12_GPIO_M11, EXYNOS4X12_GPIO_M12, EXYNOS4X12_GPIO_M13, @@ -568,7 +568,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_M15, EXYNOS4X12_GPIO_M16, EXYNOS4X12_GPIO_M17, - EXYNOS4X12_GPIO_M20, /* 328 0x100 */ + EXYNOS4X12_GPIO_M20, /* 232 0xe8 */ EXYNOS4X12_GPIO_M21, EXYNOS4X12_GPIO_M22, EXYNOS4X12_GPIO_M23, @@ -576,7 +576,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_M25, EXYNOS4X12_GPIO_M26, EXYNOS4X12_GPIO_M27, - EXYNOS4X12_GPIO_M30, /* 336 0x108 */ + EXYNOS4X12_GPIO_M30, /* 240 0xf0 */ EXYNOS4X12_GPIO_M31, EXYNOS4X12_GPIO_M32, EXYNOS4X12_GPIO_M33, @@ -584,7 +584,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_M35, EXYNOS4X12_GPIO_M36, EXYNOS4X12_GPIO_M37, - EXYNOS4X12_GPIO_M40, /* 344 0x110 */ + EXYNOS4X12_GPIO_M40, /* 248 0xf8 */ EXYNOS4X12_GPIO_M41, EXYNOS4X12_GPIO_M42, EXYNOS4X12_GPIO_M43, @@ -592,7 +592,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_M45, EXYNOS4X12_GPIO_M46, EXYNOS4X12_GPIO_M47, - EXYNOS4X12_GPIO_X00 = 928, /* 928 0x3A0 */ + EXYNOS4X12_GPIO_X00, /* 256 0x100 */ EXYNOS4X12_GPIO_X01, EXYNOS4X12_GPIO_X02, EXYNOS4X12_GPIO_X03, @@ -600,7 +600,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_X05, EXYNOS4X12_GPIO_X06, EXYNOS4X12_GPIO_X07, - EXYNOS4X12_GPIO_X10, /* 936 0x3A8 */ + EXYNOS4X12_GPIO_X10, /* 264 0x108 */ EXYNOS4X12_GPIO_X11, EXYNOS4X12_GPIO_X12, EXYNOS4X12_GPIO_X13, @@ -608,7 +608,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_X15, EXYNOS4X12_GPIO_X16, EXYNOS4X12_GPIO_X17, - EXYNOS4X12_GPIO_X20, /* 944 0x3B0 */ + EXYNOS4X12_GPIO_X20, /* 272 0x110 */ EXYNOS4X12_GPIO_X21, EXYNOS4X12_GPIO_X22, EXYNOS4X12_GPIO_X23, @@ -616,7 +616,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_X25, EXYNOS4X12_GPIO_X26, EXYNOS4X12_GPIO_X27, - EXYNOS4X12_GPIO_X30, /* 952 0x3B8 */ + EXYNOS4X12_GPIO_X30, /* 280 0x118 */ EXYNOS4X12_GPIO_X31, EXYNOS4X12_GPIO_X32, EXYNOS4X12_GPIO_X33, @@ -626,7 +626,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_X37, /* GPIO_PART3_STARTS */ - EXYNOS4X12_GPIO_MAX_PORT_PART_2,/* 960 0x3C0 */ + EXYNOS4X12_GPIO_MAX_PORT_PART_2,/* 288 0x120 */ EXYNOS4X12_GPIO_Z0 = EXYNOS4X12_GPIO_MAX_PORT_PART_2, EXYNOS4X12_GPIO_Z1, EXYNOS4X12_GPIO_Z2, @@ -637,7 +637,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_Z7, /* GPIO_PART4_STARTS */ - EXYNOS4X12_GPIO_MAX_PORT_PART_3,/* 968 0x3C8 */ + EXYNOS4X12_GPIO_MAX_PORT_PART_3,/* 296 0x128 */ EXYNOS4X12_GPIO_V00 = EXYNOS4X12_GPIO_MAX_PORT_PART_3, EXYNOS4X12_GPIO_V01, EXYNOS4X12_GPIO_V02, @@ -646,7 +646,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_V05, EXYNOS4X12_GPIO_V06, EXYNOS4X12_GPIO_V07, - EXYNOS4X12_GPIO_V10, /* 976 0x3D0 */ + EXYNOS4X12_GPIO_V10, /* 304 0x130 */ EXYNOS4X12_GPIO_V11, EXYNOS4X12_GPIO_V12, EXYNOS4X12_GPIO_V13, @@ -654,7 +654,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_V15, EXYNOS4X12_GPIO_V16, EXYNOS4X12_GPIO_V17, - EXYNOS4X12_GPIO_V20 = 992, /* 992 0x3E0 */ + EXYNOS4X12_GPIO_V20, /* 312 0x138 */ EXYNOS4X12_GPIO_V21, EXYNOS4X12_GPIO_V22, EXYNOS4X12_GPIO_V23, @@ -662,7 +662,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_V25, EXYNOS4X12_GPIO_V26, EXYNOS4X12_GPIO_V27, - EXYNOS4X12_GPIO_V30 = 1000, /* 1000 0x3E8 */ + EXYNOS4X12_GPIO_V30, /* 320 0x140 */ EXYNOS4X12_GPIO_V31, EXYNOS4X12_GPIO_V32, EXYNOS4X12_GPIO_V33, @@ -670,7 +670,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_V35, EXYNOS4X12_GPIO_V36, EXYNOS4X12_GPIO_V37, - EXYNOS4X12_GPIO_V40 = 1016, /* 1016 0x3F8 */ + EXYNOS4X12_GPIO_V40, /* 328 0x148 */ EXYNOS4X12_GPIO_V41, EXYNOS4X12_GPIO_V42, EXYNOS4X12_GPIO_V43, @@ -1504,12 +1504,7 @@ static const struct gpio_name_num_table exynos5420_gpio_table[] = { void gpio_cfg_pin(int gpio, int cfg); void gpio_set_pull(int gpio, int mode); void gpio_set_drv(int gpio, int mode); -int gpio_direction_input(unsigned gpio); -int gpio_direction_output(unsigned gpio, int value); -int gpio_set_value(unsigned gpio, int value); -int gpio_get_value(unsigned gpio); void gpio_set_rate(int gpio, int mode); -struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned gpio); int s5p_gpio_get_pin(unsigned gpio); #endif diff --git a/arch/arm/include/asm/arch-keystone/clock-k2e.h b/arch/arm/include/asm/arch-keystone/clock-k2e.h index df33a78a10..d013b830ed 100644 --- a/arch/arm/include/asm/arch-keystone/clock-k2e.h +++ b/arch/arm/include/asm/arch-keystone/clock-k2e.h @@ -25,27 +25,28 @@ enum ext_clk_e { extern unsigned int external_clk[ext_clk_count]; -enum clk_e { - core_pll_clk, - pass_pll_clk, - ddr3_pll_clk, - sys_clk0_clk, - sys_clk0_1_clk, - sys_clk0_2_clk, - sys_clk0_3_clk, - sys_clk0_4_clk, - sys_clk0_6_clk, - sys_clk0_8_clk, - sys_clk0_12_clk, - sys_clk0_24_clk, - sys_clk1_clk, - sys_clk1_3_clk, - sys_clk1_4_clk, - sys_clk1_6_clk, - sys_clk1_12_clk, - sys_clk2_clk, - sys_clk3_clk -}; +#define CLK_LIST(CLK)\ + CLK(0, core_pll_clk)\ + CLK(1, pass_pll_clk)\ + CLK(2, ddr3_pll_clk)\ + CLK(3, sys_clk0_clk)\ + CLK(4, sys_clk0_1_clk)\ + CLK(5, sys_clk0_2_clk)\ + CLK(6, sys_clk0_3_clk)\ + CLK(7, sys_clk0_4_clk)\ + CLK(8, sys_clk0_6_clk)\ + CLK(9, sys_clk0_8_clk)\ + CLK(10, sys_clk0_12_clk)\ + CLK(11, sys_clk0_24_clk)\ + CLK(12, sys_clk1_clk)\ + CLK(13, sys_clk1_3_clk)\ + CLK(14, sys_clk1_4_clk)\ + CLK(15, sys_clk1_6_clk)\ + CLK(16, sys_clk1_12_clk)\ + CLK(17, sys_clk2_clk)\ + CLK(18, sys_clk3_clk) + +#define PLLSET_CMD_LIST "<pa|ddr3>" #define KS2_CLK1_6 sys_clk0_6_clk diff --git a/arch/arm/include/asm/arch-keystone/clock-k2hk.h b/arch/arm/include/asm/arch-keystone/clock-k2hk.h index bdb869bed4..f28d5f0c4e 100644 --- a/arch/arm/include/asm/arch-keystone/clock-k2hk.h +++ b/arch/arm/include/asm/arch-keystone/clock-k2hk.h @@ -28,29 +28,30 @@ enum ext_clk_e { extern unsigned int external_clk[ext_clk_count]; -enum clk_e { - core_pll_clk, - pass_pll_clk, - tetris_pll_clk, - ddr3a_pll_clk, - ddr3b_pll_clk, - sys_clk0_clk, - sys_clk0_1_clk, - sys_clk0_2_clk, - sys_clk0_3_clk, - sys_clk0_4_clk, - sys_clk0_6_clk, - sys_clk0_8_clk, - sys_clk0_12_clk, - sys_clk0_24_clk, - sys_clk1_clk, - sys_clk1_3_clk, - sys_clk1_4_clk, - sys_clk1_6_clk, - sys_clk1_12_clk, - sys_clk2_clk, - sys_clk3_clk -}; +#define CLK_LIST(CLK)\ + CLK(0, core_pll_clk)\ + CLK(1, pass_pll_clk)\ + CLK(2, tetris_pll_clk)\ + CLK(3, ddr3a_pll_clk)\ + CLK(4, ddr3b_pll_clk)\ + CLK(5, sys_clk0_clk)\ + CLK(6, sys_clk0_1_clk)\ + CLK(7, sys_clk0_2_clk)\ + CLK(8, sys_clk0_3_clk)\ + CLK(9, sys_clk0_4_clk)\ + CLK(10, sys_clk0_6_clk)\ + CLK(11, sys_clk0_8_clk)\ + CLK(12, sys_clk0_12_clk)\ + CLK(13, sys_clk0_24_clk)\ + CLK(14, sys_clk1_clk)\ + CLK(15, sys_clk1_3_clk)\ + CLK(16, sys_clk1_4_clk)\ + CLK(17, sys_clk1_6_clk)\ + CLK(18, sys_clk1_12_clk)\ + CLK(19, sys_clk2_clk)\ + CLK(20, sys_clk3_clk) + +#define PLLSET_CMD_LIST "<pa|arm|ddr3a|ddr3b>" #define KS2_CLK1_6 sys_clk0_6_clk diff --git a/arch/arm/include/asm/arch-keystone/clock-k2l.h b/arch/arm/include/asm/arch-keystone/clock-k2l.h new file mode 100644 index 0000000000..bb9a5c4dcf --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/clock-k2l.h @@ -0,0 +1,95 @@ +/* + * K2L: Clock management APIs + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_CLOCK_K2L_H +#define __ASM_ARCH_CLOCK_K2L_H + +enum ext_clk_e { + sys_clk, + alt_core_clk, + pa_clk, + tetris_clk, + ddr3_clk, + pcie_clk, + sgmii_clk, + usb_clk, + rp1_clk, + ext_clk_count /* number of external clocks */ +}; + +extern unsigned int external_clk[ext_clk_count]; + +#define CLK_LIST(CLK)\ + CLK(0, core_pll_clk)\ + CLK(1, pass_pll_clk)\ + CLK(2, tetris_pll_clk)\ + CLK(3, ddr3_pll_clk)\ + CLK(4, sys_clk0_clk)\ + CLK(5, sys_clk0_1_clk)\ + CLK(6, sys_clk0_2_clk)\ + CLK(7, sys_clk0_3_clk)\ + CLK(8, sys_clk0_4_clk)\ + CLK(9, sys_clk0_6_clk)\ + CLK(10, sys_clk0_8_clk)\ + CLK(11, sys_clk0_12_clk)\ + CLK(12, sys_clk0_24_clk)\ + CLK(13, sys_clk1_clk)\ + CLK(14, sys_clk1_3_clk)\ + CLK(15, sys_clk1_4_clk)\ + CLK(16, sys_clk1_6_clk)\ + CLK(17, sys_clk1_12_clk)\ + CLK(18, sys_clk2_clk)\ + CLK(19, sys_clk3_clk)\ + +#define PLLSET_CMD_LIST "<pa|arm|ddr3>" + +#define KS2_CLK1_6 sys_clk0_6_clk + +/* PLL identifiers */ +enum pll_type_e { + CORE_PLL, + PASS_PLL, + TETRIS_PLL, + DDR3_PLL, +}; + +enum { + SPD800, + SPD1000, + SPD1200, + SPD1350, + SPD1400, + SPD_RSV +}; + +#define CORE_PLL_799 {CORE_PLL, 13, 1, 2} +#define CORE_PLL_983 {CORE_PLL, 16, 1, 2} +#define CORE_PLL_1000 {CORE_PLL, 114, 7, 2} +#define CORE_PLL_1167 {CORE_PLL, 19, 1, 2} +#define CORE_PLL_1198 {CORE_PLL, 39, 2, 2} +#define CORE_PLL_1228 {CORE_PLL, 20, 1, 2} +#define PASS_PLL_1228 {PASS_PLL, 20, 1, 2} +#define PASS_PLL_983 {PASS_PLL, 16, 1, 2} +#define PASS_PLL_1050 {PASS_PLL, 205, 12, 2} +#define TETRIS_PLL_491 {TETRIS_PLL, 8, 1, 2} +#define TETRIS_PLL_737 {TETRIS_PLL, 12, 1, 2} +#define TETRIS_PLL_799 {TETRIS_PLL, 13, 1, 2} +#define TETRIS_PLL_983 {TETRIS_PLL, 16, 1, 2} +#define TETRIS_PLL_1000 {TETRIS_PLL, 114, 7, 2} +#define TETRIS_PLL_1167 {TETRIS_PLL, 19, 1, 2} +#define TETRIS_PLL_1198 {TETRIS_PLL, 39, 2, 2} +#define TETRIS_PLL_1228 {TETRIS_PLL, 20, 1, 2} +#define TETRIS_PLL_1352 {TETRIS_PLL, 22, 1, 2} +#define TETRIS_PLL_1401 {TETRIS_PLL, 114, 5, 2} +#define DDR3_PLL_200 {DDR3_PLL, 4, 1, 2} +#define DDR3_PLL_400 {DDR3_PLL, 16, 1, 4} +#define DDR3_PLL_800 {DDR3_PLL, 16, 1, 2} +#define DDR3_PLL_333 {DDR3_PLL, 20, 1, 6} + +#endif diff --git a/arch/arm/include/asm/arch-keystone/clock.h b/arch/arm/include/asm/arch-keystone/clock.h index dae000e43a..9f6cfb265f 100644 --- a/arch/arm/include/asm/arch-keystone/clock.h +++ b/arch/arm/include/asm/arch-keystone/clock.h @@ -20,10 +20,22 @@ #include <asm/arch/clock-k2e.h> #endif +#ifdef CONFIG_SOC_K2L +#include <asm/arch/clock-k2l.h> +#endif + #define MAIN_PLL CORE_PLL #include <asm/types.h> +#define GENERATE_ENUM(NUM, ENUM) ENUM = NUM, +#define GENERATE_INDX_STR(NUM, STRING) #NUM"\t- "#STRING"\n" +#define CLOCK_INDEXES_LIST CLK_LIST(GENERATE_INDX_STR) + +enum clk_e { + CLK_LIST(GENERATE_ENUM) +}; + struct keystone_pll_regs { u32 reg0; u32 reg1; @@ -46,6 +58,7 @@ void init_pll(const struct pll_init_data *data); unsigned long clk_get_rate(unsigned int clk); unsigned long clk_round_rate(unsigned int clk, unsigned long hz); int clk_set_rate(unsigned int clk, unsigned long hz); +void pass_pll_pa_clk_enable(void); int get_max_dev_speed(void); int get_max_arm_speed(void); diff --git a/arch/arm/include/asm/arch-keystone/ddr3.h b/arch/arm/include/asm/arch-keystone/ddr3.h index 6bf35d3543..b044d6f18f 100644 --- a/arch/arm/include/asm/arch-keystone/ddr3.h +++ b/arch/arm/include/asm/arch-keystone/ddr3.h @@ -49,8 +49,14 @@ struct ddr3_emif_config { }; void ddr3_init(void); +int ddr3_get_size(void); void ddr3_reset_ddrphy(void); +void ddr3_init_ecc(u32 base); +void ddr3_disable_ecc(u32 base); +void ddr3_check_ecc_int(u32 base); +int ddr3_ecc_support_rmw(u32 base); void ddr3_err_reset_workaround(void); +void ddr3_enable_ecc(u32 base, int test); void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg); void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg); diff --git a/arch/arm/include/asm/arch-keystone/emac_defs.h b/arch/arm/include/asm/arch-keystone/emac_defs.h deleted file mode 100644 index 9cd8925819..0000000000 --- a/arch/arm/include/asm/arch-keystone/emac_defs.h +++ /dev/null @@ -1,237 +0,0 @@ -/* - * emac definitions for keystone2 devices - * - * (C) Copyright 2012-2014 - * Texas Instruments Incorporated, <www.ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _EMAC_DEFS_H_ -#define _EMAC_DEFS_H_ - -#include <asm/arch/hardware.h> -#include <asm/io.h> - -#define EMAC_EMACSL_BASE_ADDR (KS2_PASS_BASE + 0x00090900) -#define EMAC_MDIO_BASE_ADDR (KS2_PASS_BASE + 0x00090300) -#define EMAC_SGMII_BASE_ADDR (KS2_PASS_BASE + 0x00090100) - -#define KEYSTONE2_EMAC_GIG_ENABLE - -#define MAC_ID_BASE_ADDR (KS2_DEVICE_STATE_CTRL_BASE + 0x110) - -#ifdef CONFIG_SOC_K2HK -/* MDIO module input frequency */ -#define EMAC_MDIO_BUS_FREQ (clk_get_rate(pass_pll_clk)) -/* MDIO clock output frequency */ -#define EMAC_MDIO_CLOCK_FREQ 1000000 /* 1.0 MHz */ -#endif - -/* MII Status Register */ -#define MII_STATUS_REG 1 -#define MII_STATUS_LINK_MASK (0x4) - -/* Marvell 88E1111 PHY ID */ -#define PHY_MARVELL_88E1111 (0x01410cc0) - -#define MDIO_CONTROL_IDLE (0x80000000) -#define MDIO_CONTROL_ENABLE (0x40000000) -#define MDIO_CONTROL_FAULT_ENABLE (0x40000) -#define MDIO_CONTROL_FAULT (0x80000) -#define MDIO_USERACCESS0_GO (0x80000000) -#define MDIO_USERACCESS0_WRITE_READ (0x0) -#define MDIO_USERACCESS0_WRITE_WRITE (0x40000000) -#define MDIO_USERACCESS0_ACK (0x20000000) - -#define EMAC_MACCONTROL_MIIEN_ENABLE (0x20) -#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE (0x1) -#define EMAC_MACCONTROL_GIGABIT_ENABLE (1 << 7) -#define EMAC_MACCONTROL_GIGFORCE (1 << 17) -#define EMAC_MACCONTROL_RMIISPEED_100 (1 << 15) - -#define EMAC_MIN_ETHERNET_PKT_SIZE 60 - -struct mac_sl_cfg { - u_int32_t max_rx_len; /* Maximum receive packet length. */ - u_int32_t ctl; /* Control bitfield */ -}; - -/* - * Definition: Control bitfields used in the ctl field of hwGmacSlCfg_t - */ -#define GMACSL_RX_ENABLE_RCV_CONTROL_FRAMES (1 << 24) -#define GMACSL_RX_ENABLE_RCV_SHORT_FRAMES (1 << 23) -#define GMACSL_RX_ENABLE_RCV_ERROR_FRAMES (1 << 22) -#define GMACSL_RX_ENABLE_EXT_CTL (1 << 18) -#define GMACSL_RX_ENABLE_GIG_FORCE (1 << 17) -#define GMACSL_RX_ENABLE_IFCTL_B (1 << 16) -#define GMACSL_RX_ENABLE_IFCTL_A (1 << 15) -#define GMACSL_RX_ENABLE_CMD_IDLE (1 << 11) -#define GMACSL_TX_ENABLE_SHORT_GAP (1 << 10) -#define GMACSL_ENABLE_GIG_MODE (1 << 7) -#define GMACSL_TX_ENABLE_PACE (1 << 6) -#define GMACSL_ENABLE (1 << 5) -#define GMACSL_TX_ENABLE_FLOW_CTL (1 << 4) -#define GMACSL_RX_ENABLE_FLOW_CTL (1 << 3) -#define GMACSL_ENABLE_LOOPBACK (1 << 1) -#define GMACSL_ENABLE_FULL_DUPLEX (1 << 0) - -/* - * DEFINTITION: function return values - */ -#define GMACSL_RET_OK 0 -#define GMACSL_RET_INVALID_PORT -1 -#define GMACSL_RET_WARN_RESET_INCOMPLETE -2 -#define GMACSL_RET_WARN_MAXLEN_TOO_BIG -3 -#define GMACSL_RET_CONFIG_FAIL_RESET_ACTIVE -4 - -/* Register offsets */ -#define CPGMACSL_REG_ID 0x00 -#define CPGMACSL_REG_CTL 0x04 -#define CPGMACSL_REG_STATUS 0x08 -#define CPGMACSL_REG_RESET 0x0c -#define CPGMACSL_REG_MAXLEN 0x10 -#define CPGMACSL_REG_BOFF 0x14 -#define CPGMACSL_REG_RX_PAUSE 0x18 -#define CPGMACSL_REG_TX_PAURSE 0x1c -#define CPGMACSL_REG_EM_CTL 0x20 -#define CPGMACSL_REG_PRI 0x24 - -/* Soft reset register values */ -#define CPGMAC_REG_RESET_VAL_RESET_MASK (1 << 0) -#define CPGMAC_REG_RESET_VAL_RESET (1 << 0) - -/* Maxlen register values */ -#define CPGMAC_REG_MAXLEN_LEN 0x3fff - -/* Control bitfields */ -#define CPSW_CTL_P2_PASS_PRI_TAGGED (1 << 5) -#define CPSW_CTL_P1_PASS_PRI_TAGGED (1 << 4) -#define CPSW_CTL_P0_PASS_PRI_TAGGED (1 << 3) -#define CPSW_CTL_P0_ENABLE (1 << 2) -#define CPSW_CTL_VLAN_AWARE (1 << 1) -#define CPSW_CTL_FIFO_LOOPBACK (1 << 0) - -#define DEVICE_CPSW_NUM_PORTS 5 /* 5 switch ports */ -#define DEVICE_CPSW_BASE (0x02090800) -#define target_get_switch_ctl() CPSW_CTL_P0_ENABLE /* Enable port 0 */ -#define SWITCH_MAX_PKT_SIZE 9000 - -/* Register offsets */ -#define CPSW_REG_CTL 0x004 -#define CPSW_REG_STAT_PORT_EN 0x00c -#define CPSW_REG_MAXLEN 0x040 -#define CPSW_REG_ALE_CONTROL 0x608 -#define CPSW_REG_ALE_PORTCTL(x) (0x640 + (x)*4) - -/* Register values */ -#define CPSW_REG_VAL_STAT_ENABLE_ALL 0xf -#define CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE ((u_int32_t)0xc0000000) -#define CPSW_REG_VAL_ALE_CTL_BYPASS ((u_int32_t)0x00000010) -#define CPSW_REG_VAL_PORTCTL_FORWARD_MODE 0x3 - -#define SGMII_REG_STATUS_LOCK BIT(4) -#define SGMII_REG_STATUS_LINK BIT(0) -#define SGMII_REG_STATUS_AUTONEG BIT(2) -#define SGMII_REG_CONTROL_AUTONEG BIT(0) -#define SGMII_REG_CONTROL_MASTER BIT(5) -#define SGMII_REG_MR_ADV_ENABLE BIT(0) -#define SGMII_REG_MR_ADV_LINK BIT(15) -#define SGMII_REG_MR_ADV_FULL_DUPLEX BIT(12) -#define SGMII_REG_MR_ADV_GIG_MODE BIT(11) - -#define SGMII_LINK_MAC_MAC_AUTONEG 0 -#define SGMII_LINK_MAC_PHY 1 -#define SGMII_LINK_MAC_MAC_FORCED 2 -#define SGMII_LINK_MAC_FIBER 3 -#define SGMII_LINK_MAC_PHY_FORCED 4 - -#define TARGET_SGMII_BASE KS2_PASS_BASE + 0x00090100 -#define TARGET_SGMII_BASE_ADDRESSES {KS2_PASS_BASE + 0x00090100, \ - KS2_PASS_BASE + 0x00090200, \ - KS2_PASS_BASE + 0x00090400, \ - KS2_PASS_BASE + 0x00090500} - -#define SGMII_OFFSET(x) ((x <= 1) ? (x * 0x100) : ((x * 0x100) + 0x100)) - -/* - * SGMII registers - */ -#define SGMII_IDVER_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x000) -#define SGMII_SRESET_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x004) -#define SGMII_CTL_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x010) -#define SGMII_STATUS_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x014) -#define SGMII_MRADV_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x018) -#define SGMII_LPADV_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x020) -#define SGMII_TXCFG_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x030) -#define SGMII_RXCFG_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x034) -#define SGMII_AUXCFG_REG(x) (TARGET_SGMII_BASE + SGMII_OFFSET(x) + 0x038) - -#define DEVICE_EMACSL_BASE(x) (KS2_PASS_BASE + 0x00090900 + (x) * 0x040) -#define DEVICE_N_GMACSL_PORTS 4 -#define DEVICE_EMACSL_RESET_POLL_COUNT 100 - -#define DEVICE_PSTREAM_CFG_REG_ADDR (KS2_PASS_BASE + 0x604) - -#ifdef CONFIG_SOC_K2HK -#define DEVICE_PSTREAM_CFG_REG_VAL_ROUTE_CPPI 0x06060606 -#endif - -#define hw_config_streaming_switch() \ - writel(DEVICE_PSTREAM_CFG_REG_VAL_ROUTE_CPPI,\ - DEVICE_PSTREAM_CFG_REG_ADDR); - -/* EMAC MDIO Registers Structure */ -struct mdio_regs { - dv_reg version; - dv_reg control; - dv_reg alive; - dv_reg link; - dv_reg linkintraw; - dv_reg linkintmasked; - u_int8_t rsvd0[8]; - dv_reg userintraw; - dv_reg userintmasked; - dv_reg userintmaskset; - dv_reg userintmaskclear; - u_int8_t rsvd1[80]; - dv_reg useraccess0; - dv_reg userphysel0; - dv_reg useraccess1; - dv_reg userphysel1; -}; - -/* Ethernet MAC Registers Structure */ -struct emac_regs { - dv_reg idver; - dv_reg maccontrol; - dv_reg macstatus; - dv_reg soft_reset; - dv_reg rx_maxlen; - u32 rsvd0; - dv_reg rx_pause; - dv_reg tx_pause; - dv_reg emcontrol; - dv_reg pri_map; - u32 rsvd1[6]; -}; - -#define SGMII_ACCESS(port, reg) \ - *((volatile unsigned int *)(sgmiis[port] + reg)) - -struct eth_priv_t { - char int_name[32]; - int rx_flow; - int phy_addr; - int slave_port; - int sgmii_link_type; -}; - -extern struct eth_priv_t eth_priv_cfg[]; - -int keystone2_emac_initialize(struct eth_priv_t *eth_priv); -void sgmii_serdes_setup_156p25mhz(void); -void sgmii_serdes_shutdown(void); - -#endif /* _EMAC_DEFS_H_ */ diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2e.h b/arch/arm/include/asm/arch-keystone/hardware-k2e.h index 62172a4b84..9512756619 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2e.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2e.h @@ -34,11 +34,34 @@ #define KS2_LPSC_PCIE_1 27 #define KS2_LPSC_XGE 50 +/* MSMC */ +#define KS2_MSMC_SEGMENT_PCIE1 13 + /* Chip Interrupt Controller */ #define KS2_CIC2_DDR3_ECC_IRQ_NUM -1 /* not defined in K2E */ #define KS2_CIC2_DDR3_ECC_CHAN_NUM -1 /* not defined in K2E */ +/* SGMII SerDes */ +#define KS2_SGMII_SERDES2_BASE 0x02324000 +#define KS2_LANES_PER_SGMII_SERDES 4 + /* Number of DSP cores */ #define KS2_NUM_DSPS 1 +/* NETCP pktdma */ +#define KS2_NETCP_PDMA_CTRL_BASE 0x24186000 +#define KS2_NETCP_PDMA_TX_BASE 0x24187000 +#define KS2_NETCP_PDMA_TX_CH_NUM 21 +#define KS2_NETCP_PDMA_RX_BASE 0x24188000 +#define KS2_NETCP_PDMA_RX_CH_NUM 91 +#define KS2_NETCP_PDMA_SCHED_BASE 0x24186100 +#define KS2_NETCP_PDMA_RX_FLOW_BASE 0x24189000 +#define KS2_NETCP_PDMA_RX_FLOW_NUM 96 +#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001 +#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002 +#define KS2_NETCP_PDMA_TX_SND_QUEUE 896 + +/* NETCP */ +#define KS2_NETCP_BASE 0x24000000 + #endif diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h index eb132f73e6..5a9ea4fbca 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h @@ -10,8 +10,6 @@ #ifndef __ASM_ARCH_HARDWARE_K2HK_H #define __ASM_ARCH_HARDWARE_K2HK_H -#define KS2_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c) - #define KS2_ARM_PLL_EN BIT(13) /* PA SS Registers */ @@ -81,7 +79,30 @@ #define KS2_DDR3B_EMIF_DATA_BASE 0x60000000 #define KS2_DDR3B_DDRPHYC 0x02328000 +#define KS2_CIC2_DDR3_ECC_IRQ_NUM 0x0D3 /* DDR3 ECC system irq number */ +#define KS2_CIC2_DDR3_ECC_CHAN_NUM 0x01D /* DDR3 ECC int mapped to CIC2 + channel 29 */ + +/* SGMII SerDes */ +#define KS2_LANES_PER_SGMII_SERDES 4 + /* Number of DSP cores */ #define KS2_NUM_DSPS 8 +/* NETCP pktdma */ +#define KS2_NETCP_PDMA_CTRL_BASE 0x02004000 +#define KS2_NETCP_PDMA_TX_BASE 0x02004400 +#define KS2_NETCP_PDMA_TX_CH_NUM 9 +#define KS2_NETCP_PDMA_RX_BASE 0x02004800 +#define KS2_NETCP_PDMA_RX_CH_NUM 26 +#define KS2_NETCP_PDMA_SCHED_BASE 0x02004c00 +#define KS2_NETCP_PDMA_RX_FLOW_BASE 0x02005000 +#define KS2_NETCP_PDMA_RX_FLOW_NUM 32 +#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001 +#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002 +#define KS2_NETCP_PDMA_TX_SND_QUEUE 648 + +/* NETCP */ +#define KS2_NETCP_BASE 0x02000000 + #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2l.h b/arch/arm/include/asm/arch-keystone/hardware-k2l.h new file mode 100644 index 0000000000..05532ada70 --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/hardware-k2l.h @@ -0,0 +1,101 @@ +/* + * K2L: SoC definitions + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_HARDWARE_K2L_H +#define __ASM_ARCH_HARDWARE_K2L_H + +#define KS2_ARM_PLL_EN BIT(13) + +/* PA SS Registers */ +#define KS2_PASS_BASE 0x26000000 + +/* Power and Sleep Controller (PSC) Domains */ +#define KS2_LPSC_MOD 0 +#define KS2_LPSC_DFE_IQN_SYS 1 +#define KS2_LPSC_USB 2 +#define KS2_LPSC_EMIF25_SPI 3 +#define KS2_LPSC_TSIP 4 +#define KS2_LPSC_DEBUGSS_TRC 5 +#define KS2_LPSC_TETB_TRC 6 +#define KS2_LPSC_PKTPROC 7 +#define KS2_LPSC_PA KS2_LPSC_PKTPROC +#define KS2_LPSC_SGMII 8 +#define KS2_LPSC_CPGMAC KS2_LPSC_SGMII +#define KS2_LPSC_CRYPTO 9 +#define KS2_LPSC_PCIE0 10 +#define KS2_LPSC_PCIE1 11 +#define KS2_LPSC_JESD_MISC 12 +#define KS2_LPSC_CHIP_SRSS 13 +#define KS2_LPSC_MSMC 14 +#define KS2_LPSC_GEM_1 16 +#define KS2_LPSC_GEM_2 17 +#define KS2_LPSC_GEM_3 18 +#define KS2_LPSC_EMIF4F_DDR3 23 +#define KS2_LPSC_TAC 25 +#define KS2_LPSC_RAC 26 +#define KS2_LPSC_DDUC4X_CFR2X_BB 27 +#define KS2_LPSC_FFTC_A 28 +#define KS2_LPSC_OSR 34 +#define KS2_LPSC_TCP3D_0 35 +#define KS2_LPSC_TCP3D_1 37 +#define KS2_LPSC_VCP2X4_A 39 +#define KS2_LPSC_VCP2X4_B 40 +#define KS2_LPSC_VCP2X4_C 41 +#define KS2_LPSC_VCP2X4_D 42 +#define KS2_LPSC_BCP 47 +#define KS2_LPSC_DPD4X 48 +#define KS2_LPSC_FFTC_B 49 +#define KS2_LPSC_IQN_AIL 50 + +/* MSMC */ +#define KS2_MSMC_SEGMENT_PCIE1 14 + +/* Chip Interrupt Controller */ +#define KS2_CIC2_DDR3_ECC_IRQ_NUM 0x0D3 +#define KS2_CIC2_DDR3_ECC_CHAN_NUM 0x01D + +/* OSR */ +#define KS2_OSR_DATA_BASE 0x70000000 /* OSR data base */ +#define KS2_OSR_CFG_BASE 0x02348c00 /* OSR config base */ +#define KS2_OSR_ECC_VEC 0x08 /* ECC Vector reg */ +#define KS2_OSR_ECC_CTRL 0x14 /* ECC control reg */ + +/* OSR ECC Vector register */ +#define KS2_OSR_ECC_VEC_TRIG_RD BIT(15) /* trigger a read op */ +#define KS2_OSR_ECC_VEC_RD_DONE BIT(24) /* read complete */ + +#define KS2_OSR_ECC_VEC_RAM_ID_SH 0 /* RAM ID shift */ +#define KS2_OSR_ECC_VEC_RD_ADDR_SH 16 /* read address shift */ + +/* OSR ECC control register */ +#define KS2_OSR_ECC_CTRL_EN BIT(0) /* ECC enable bit */ +#define KS2_OSR_ECC_CTRL_CHK BIT(1) /* ECC check bit */ +#define KS2_OSR_ECC_CTRL_RMW BIT(2) /* ECC check bit */ + +/* Number of OSR RAM banks */ +#define KS2_OSR_NUM_RAM_BANKS 4 + +/* OSR memory size */ +#define KS2_OSR_SIZE 0x100000 + +/* Number of DSP cores */ +#define KS2_NUM_DSPS 4 + +/* NETCP pktdma */ +#define KS2_NETCP_PDMA_CTRL_BASE 0x26186000 +#define KS2_NETCP_PDMA_TX_BASE 0x26187000 +#define KS2_NETCP_PDMA_TX_CH_NUM 21 +#define KS2_NETCP_PDMA_RX_BASE 0x26188000 +#define KS2_NETCP_PDMA_RX_CH_NUM 91 +#define KS2_NETCP_PDMA_SCHED_BASE 0x26186100 +#define KS2_NETCP_PDMA_RX_FLOW_BASE 0x26189000 +#define KS2_NETCP_PDMA_RX_FLOW_NUM 96 +#define KS2_NETCP_PDMA_TX_SND_QUEUE 896 + +#endif /* __ASM_ARCH_HARDWARE_K2L_H */ diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h index 76e6441e57..c6a54d8b91 100644 --- a/arch/arm/include/asm/arch-keystone/hardware.h +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -87,6 +87,52 @@ typedef volatile unsigned int *dv_reg_p; #define KS2_DDR3_PLLCTRL_PHY_RESET 0x80000000 +/* DDR3 ECC */ +#define KS2_DDR3_ECC_INT_STATUS_OFFSET 0x0AC +#define KS2_DDR3_ECC_INT_ENABLE_SET_SYS_OFFSET 0x0B4 +#define KS2_DDR3_ECC_CTRL_OFFSET 0x110 +#define KS2_DDR3_ECC_ADDR_RANGE1_OFFSET 0x114 +#define KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET 0x130 +#define KS2_DDR3_ONE_BIT_ECC_ERR_ADDR_LOG_OFFSET 0x13C + +/* DDR3 ECC Interrupt Status register */ +#define KS2_DDR3_1B_ECC_ERR_SYS BIT(5) +#define KS2_DDR3_2B_ECC_ERR_SYS BIT(4) +#define KS2_DDR3_WR_ECC_ERR_SYS BIT(3) + +/* DDR3 ECC Control register */ +#define KS2_DDR3_ECC_EN BIT(31) +#define KS2_DDR3_ECC_ADDR_RNG_PROT BIT(30) +#define KS2_DDR3_ECC_VERIFY_EN BIT(29) +#define KS2_DDR3_ECC_RMW_EN BIT(28) +#define KS2_DDR3_ECC_ADDR_RNG_1_EN BIT(0) + +#define KS2_DDR3_ECC_ENABLE (KS2_DDR3_ECC_EN | \ + KS2_DDR3_ECC_ADDR_RNG_PROT | \ + KS2_DDR3_ECC_VERIFY_EN) + +/* EDMA */ +#define KS2_EDMA0_BASE 0x02700000 + +/* EDMA3 register offsets */ +#define KS2_EDMA_QCHMAP0 0x0200 +#define KS2_EDMA_IPR 0x1068 +#define KS2_EDMA_ICR 0x1070 +#define KS2_EDMA_QEECR 0x1088 +#define KS2_EDMA_QEESR 0x108c +#define KS2_EDMA_PARAM_1(x) (0x4020 + (4 * x)) + +/* Chip Interrupt Controller */ +#define KS2_CIC2_BASE 0x02608000 + +/* Chip Interrupt Controller register offsets */ +#define KS2_CIC_CTRL 0x04 +#define KS2_CIC_HOST_CTRL 0x0C +#define KS2_CIC_GLOBAL_ENABLE 0x10 +#define KS2_CIC_SYS_ENABLE_IDX_SET 0x28 +#define KS2_CIC_HOST_ENABLE_IDX_SET 0x34 +#define KS2_CIC_CHAN_MAP(n) (0x0400 + (n << 2)) + #define KS2_UART0_BASE 0x02530c00 #define KS2_UART1_BASE 0x02531000 @@ -140,19 +186,51 @@ typedef volatile unsigned int *dv_reg_p; /* Flag from ks2_debug options to check if DSPs need to stay ON */ #define DBG_LEAVE_DSPS_ON 0x1 +/* MSMC control */ +#define KS2_MSMC_CTRL_BASE 0x0bc00000 +#define KS2_MSMC_DATA_BASE 0x0c000000 +#define KS2_MSMC_SEGMENT_TETRIS 8 +#define KS2_MSMC_SEGMENT_NETCP 9 +#define KS2_MSMC_SEGMENT_QM_PDSP 10 +#define KS2_MSMC_SEGMENT_PCIE0 11 + +/* MSMC segment size shift bits */ +#define KS2_MSMC_SEG_SIZE_SHIFT 12 +#define KS2_MSMC_MAP_SEG_NUM (2 << (30 - KS2_MSMC_SEG_SIZE_SHIFT)) +#define KS2_MSMC_DST_SEG_BASE (CONFIG_SYS_LPAE_SDRAM_BASE >> \ + KS2_MSMC_SEG_SIZE_SHIFT) + /* Device speed */ #define KS2_REV1_DEVSPEED (KS2_DEVICE_STATE_CTRL_BASE + 0xc98) #define KS2_EFUSE_BOOTROM (KS2_DEVICE_STATE_CTRL_BASE + 0xc90) +#define KS2_MISC_CTRL (KS2_DEVICE_STATE_CTRL_BASE + 0xc7c) /* Queue manager */ -#define KS2_QM_MANAGER_BASE 0x02a02000 +#define KS2_QM_BASE_ADDRESS 0x23a80000 +#define KS2_QM_CONF_BASE 0x02a02000 #define KS2_QM_DESC_SETUP_BASE 0x02a03000 -#define KS2_QM_MANAGER_QUEUES_BASEi 0x02a80000 +#define KS2_QM_STATUS_RAM_BASE 0x02a06000 +#define KS2_QM_INTD_CONF_BASE 0x02a0c000 +#define KS2_QM_PDSP1_CMD_BASE 0x02a20000 +#define KS2_QM_PDSP1_CTRL_BASE 0x02a0f000 +#define KS2_QM_PDSP1_IRAM_BASE 0x02a10000 +#define KS2_QM_MANAGER_QUEUES_BASE 0x02a80000 #define KS2_QM_MANAGER_Q_PROXY_BASE 0x02ac0000 #define KS2_QM_QUEUE_STATUS_BASE 0x02a40000 +#define KS2_QM_LINK_RAM_BASE 0x00100000 +#define KS2_QM_REGION_NUM 64 +#define KS2_QM_QPOOL_NUM 4000 -/* MSMC control */ -#define KS2_MSMC_CTRL_BASE 0x0bc00000 +/* USB */ +#define KS2_USB_SS_BASE 0x02680000 +#define KS2_USB_HOST_XHCI_BASE (KS2_USB_SS_BASE + 0x10000) +#define KS2_DEV_USB_PHY_BASE 0x02620738 +#define KS2_USB_PHY_CFG_BASE 0x02630000 + +#define KS2_MAC_ID_BASE_ADDR (KS2_DEVICE_STATE_CTRL_BASE + 0x110) + +/* SGMII SerDes */ +#define KS2_SGMII_SERDES_BASE 0x0232a000 #ifdef CONFIG_SOC_K2HK #include <asm/arch/hardware-k2hk.h> @@ -162,6 +240,10 @@ typedef volatile unsigned int *dv_reg_p; #include <asm/arch/hardware-k2e.h> #endif +#ifdef CONFIG_SOC_K2L +#include <asm/arch/hardware-k2l.h> +#endif + #ifndef __ASSEMBLY__ static inline int cpu_is_k2hk(void) { @@ -179,6 +261,14 @@ static inline int cpu_is_k2e(void) return (part_no == 0xb9a6) ? 1 : 0; } +static inline int cpu_is_k2l(void) +{ + unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG); + unsigned int part_no = (jtag_id >> 12) & 0xffff; + + return (part_no == 0xb9a7) ? 1 : 0; +} + static inline int cpu_revision(void) { unsigned int jtag_id = __raw_readl(KS2_JTAG_ID_REG); diff --git a/arch/arm/include/asm/arch-keystone/msmc.h b/arch/arm/include/asm/arch-keystone/msmc.h index c320db5b65..083f5ba052 100644 --- a/arch/arm/include/asm/arch-keystone/msmc.h +++ b/arch/arm/include/asm/arch-keystone/msmc.h @@ -12,6 +12,34 @@ #include <asm/arch/hardware.h> +enum mpax_seg_size { + MPAX_SEG_4K = 0x0b, + MPAX_SEG_8K, + MPAX_SEG_16K, + MPAX_SEG_32K, + MPAX_SEG_64K, + MPAX_SEG_128K, + MPAX_SEG_256K, + MPAX_SEG_512K, + MPAX_SEG_1M, + MPAX_SEG_2M, + MPAX_SEG_4M, + MPAX_SEG_8M, + MPAX_SEG_16M, + MPAX_SEG_32M, + MPAX_SEG_64M, + MPAX_SEG_128M, + MPAX_SEG_256M, + MPAX_SEG_512M, + MPAX_SEG_1G, + MPAX_SEG_2G, + MPAX_SEG_4G +}; + void msmc_share_all_segments(int priv_id); +void msmc_get_ses_mpax(int priv_id, int ses_pair, u32 *mpax); +void msmc_set_ses_mpax(int priv_id, int ses_pair, u32 *mpax); +void msmc_map_ses_segment(int priv_id, int ses_pair, + u32 src_pfn, u32 dst_pfn, enum mpax_seg_size size); #endif diff --git a/arch/arm/include/asm/arch-keystone/spl.h b/arch/arm/include/asm/arch-keystone/spl.h deleted file mode 100644 index a7102d5640..0000000000 --- a/arch/arm/include/asm/arch-keystone/spl.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * (C) Copyright 2012-2014 - * Texas Instruments, <www.ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef _ASM_ARCH_SPL_H_ -#define _ASM_ARCH_SPL_H_ - -#define BOOT_DEVICE_SPI 2 - -#endif diff --git a/arch/arm/include/asm/arch-keystone/xhci-keystone.h b/arch/arm/include/asm/arch-keystone/xhci-keystone.h new file mode 100644 index 0000000000..3aab4e045f --- /dev/null +++ b/arch/arm/include/asm/arch-keystone/xhci-keystone.h @@ -0,0 +1,21 @@ +/* + * USB 3.0 DRD Controller + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#define USB3_PHY_REF_SSP_EN BIT(29) +#define USB3_PHY_OTG_VBUSVLDECTSEL BIT(16) + +/* KEYSTONE2 XHCI PHY register structure */ +struct keystone_xhci_phy { + unsigned int phy_utmi; /* ctl0 */ + unsigned int phy_pipe; /* ctl1 */ + unsigned int phy_param_ctrl_1; /* ctl2 */ + unsigned int phy_param_ctrl_2; /* ctl3 */ + unsigned int phy_clock; /* ctl4 */ + unsigned int phy_pll; /* ctl5 */ +}; diff --git a/arch/arm/include/asm/arch-kirkwood/config.h b/arch/arm/include/asm/arch-kirkwood/config.h index f7bfa0e74d..ccc8e4e7d6 100644 --- a/arch/arm/include/asm/arch-kirkwood/config.h +++ b/arch/arm/include/asm/arch-kirkwood/config.h @@ -23,7 +23,7 @@ #error "SOC Name not defined" #endif /* CONFIG_KW88F6281 */ -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> #define CONFIG_ARM926EJS 1 /* Basic Architecture */ #define CONFIG_SYS_CACHELINE_SIZE 32 /* default Dcache Line length for kirkwood */ diff --git a/arch/arm/include/asm/arch-kirkwood/cpu.h b/arch/arm/include/asm/arch-kirkwood/cpu.h index 97daa403ce..926d347110 100644 --- a/arch/arm/include/asm/arch-kirkwood/cpu.h +++ b/arch/arm/include/asm/arch-kirkwood/cpu.h @@ -140,11 +140,11 @@ struct kwgpio_registers { * functions */ unsigned char get_random_hex(void); -unsigned int kw_sdram_bar(enum memory_bank bank); -unsigned int kw_sdram_bs(enum memory_bank bank); -void kw_sdram_size_adjust(enum memory_bank bank); +unsigned int mvebu_sdram_bar(enum memory_bank bank); +unsigned int mvebu_sdram_bs(enum memory_bank bank); +void mvebu_sdram_size_adjust(enum memory_bank bank); int kw_config_adr_windows(void); -void kw_config_gpio(unsigned int gpp0_oe_val, unsigned int gpp1_oe_val, +void mvebu_config_gpio(unsigned int gpp0_oe_val, unsigned int gpp1_oe_val, unsigned int gpp0_oe, unsigned int gpp1_oe); int kw_config_mpp(unsigned int mpp0_7, unsigned int mpp8_15, unsigned int mpp16_23, unsigned int mpp24_31, diff --git a/arch/arm/include/asm/arch-kirkwood/gpio.h b/arch/arm/include/asm/arch-kirkwood/gpio.h index 5f4d786085..aa8c5da36d 100644 --- a/arch/arm/include/asm/arch-kirkwood/gpio.h +++ b/arch/arm/include/asm/arch-kirkwood/gpio.h @@ -21,14 +21,14 @@ #define GPIO_MAX 50 #define GPIO_OFF(pin) (((pin) >> 5) ? 0x0040 : 0x0000) -#define GPIO_OUT(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x00) -#define GPIO_IO_CONF(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x04) -#define GPIO_BLINK_EN(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x08) -#define GPIO_IN_POL(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x0c) -#define GPIO_DATA_IN(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x10) -#define GPIO_EDGE_CAUSE(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x14) -#define GPIO_EDGE_MASK(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x18) -#define GPIO_LEVEL_MASK(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x1c) +#define GPIO_OUT(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x00) +#define GPIO_IO_CONF(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x04) +#define GPIO_BLINK_EN(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x08) +#define GPIO_IN_POL(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x0c) +#define GPIO_DATA_IN(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x10) +#define GPIO_EDGE_CAUSE(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x14) +#define GPIO_EDGE_MASK(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x18) +#define GPIO_LEVEL_MASK(pin) (MVEBU_GPIO0_BASE + GPIO_OFF(pin) + 0x1c) /* * Kirkwood-specific GPIO API diff --git a/arch/arm/include/asm/arch-kirkwood/kirkwood.h b/arch/arm/include/asm/arch-kirkwood/soc.h index 3ea51d7848..58ed71b186 100644 --- a/arch/arm/include/asm/arch-kirkwood/kirkwood.h +++ b/arch/arm/include/asm/arch-kirkwood/soc.h @@ -22,18 +22,19 @@ #define KW_REG_UNDOC_0x1470 (KW_REGISTER(0x1470)) #define KW_REG_UNDOC_0x1478 (KW_REGISTER(0x1478)) +#define MVEBU_SDRAM_BASE (KW_REGISTER(0x1500)) #define KW_TWSI_BASE (KW_REGISTER(0x11000)) #define KW_UART0_BASE (KW_REGISTER(0x12000)) #define KW_UART1_BASE (KW_REGISTER(0x12100)) #define KW_MPP_BASE (KW_REGISTER(0x10000)) -#define KW_GPIO0_BASE (KW_REGISTER(0x10100)) -#define KW_GPIO1_BASE (KW_REGISTER(0x10140)) +#define MVEBU_GPIO0_BASE (KW_REGISTER(0x10100)) +#define MVEBU_GPIO1_BASE (KW_REGISTER(0x10140)) #define KW_RTC_BASE (KW_REGISTER(0x10300)) #define KW_NANDF_BASE (KW_REGISTER(0x10418)) -#define KW_SPI_BASE (KW_REGISTER(0x10600)) +#define MVEBU_SPI_BASE (KW_REGISTER(0x10600)) #define KW_CPU_WIN_BASE (KW_REGISTER(0x20000)) #define KW_CPU_REG_BASE (KW_REGISTER(0x20100)) -#define KW_TIMER_BASE (KW_REGISTER(0x20300)) +#define MVEBU_TIMER_BASE (KW_REGISTER(0x20300)) #define KW_REG_PCIE_BASE (KW_REGISTER(0x40000)) #define KW_USB20_BASE (KW_REGISTER(0x50000)) #define KW_EGIGA0_BASE (KW_REGISTER(0x72000)) diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index a500b5bc3b..f2c9687df4 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -19,6 +19,8 @@ #define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000) #define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000) #define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000) +#define CONFIG_SYS_FSL_SEC_ADDR (CONFIG_SYS_IMMR + 0x700000) +#define CONFIG_SYS_FSL_JR0_ADDR (CONFIG_SYS_IMMR + 0x710000) #define CONFIG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR + 0x00ea0000) #define CONFIG_SYS_FSL_GUTS_ADDR (CONFIG_SYS_IMMR + 0x00ee0000) #define CONFIG_SYS_FSL_LS1_CLK_ADDR (CONFIG_SYS_IMMR + 0x00ee1000) @@ -66,6 +68,7 @@ #define CONFIG_SYS_FSL_DSPI_BE #define CONFIG_SYS_FSL_QSPI_BE #define CONFIG_SYS_FSL_DCU_BE +#define CONFIG_SYS_FSL_SEC_LE #define DCU_LAYER_MAX_NUM 16 @@ -76,6 +79,7 @@ #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0 +#define CONFIG_SYS_FSL_SEC_COMPAT 5 #else #error SoC not defined #endif diff --git a/arch/arm/include/asm/arch-kirkwood/spi.h b/arch/arm/include/asm/arch-mvebu/spi.h index e512dcec16..e512dcec16 100644 --- a/arch/arm/include/asm/arch-kirkwood/spi.h +++ b/arch/arm/include/asm/arch-mvebu/spi.h diff --git a/arch/arm/include/asm/arch-mxs/sys_proto.h b/arch/arm/include/asm/arch-mxs/sys_proto.h index 09dfc90a9b..062f3de1d0 100644 --- a/arch/arm/include/asm/arch-mxs/sys_proto.h +++ b/arch/arm/include/asm/arch-mxs/sys_proto.h @@ -10,6 +10,8 @@ #ifndef __SYS_PROTO_H__ #define __SYS_PROTO_H__ +#include <asm/imx-common/regs-common.h> + int mxs_reset_block(struct mxs_register_32 *reg); int mxs_wait_mask_set(struct mxs_register_32 *reg, uint32_t mask, diff --git a/arch/arm/include/asm/arch-omap3/mux.h b/arch/arm/include/asm/arch-omap3/mux.h index 2f8320629b..eba4a5c7f0 100644 --- a/arch/arm/include/asm/arch-omap3/mux.h +++ b/arch/arm/include/asm/arch-omap3/mux.h @@ -281,7 +281,7 @@ #define CONTROL_PADCONF_SYS_OFF_MODE 0x0A18 #define CONTROL_PADCONF_SYS_CLKOUT1 0x0A1A #define CONTROL_PADCONF_SYS_CLKOUT2 0x01E2 -#define CONTROL_PADCONF_JTAG_nTRST 0x0A1C +#define CONTROL_PADCONF_JTAG_NTRST 0x0A1C #define CONTROL_PADCONF_JTAG_TCK 0x0A1E #define CONTROL_PADCONF_JTAG_TMS 0x0A20 #define CONTROL_PADCONF_JTAG_TDI 0x0A22 @@ -443,7 +443,7 @@ #define OMAP34XX_CTRL_WKUP_CTRL (OMAP34XX_CTRL_BASE + 0x0A5C) #define OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ (1<<6) -#define MUX_VAL(OFFSET,VALUE)\ +#define MUX_VAL(OFFSET, VALUE)\ writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET)); #define CP(x) (CONTROL_PADCONF_##x) diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index 5866bf23e8..34bd8c509a 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -64,6 +64,7 @@ void try_unlock_memory(void); u32 get_boot_type(void); void invalidate_dcache(u32); u32 wait_on_value(u32, u32, void *, u32); +void cancel_out(u32 *num, u32 *den, u32 den_limit); void sdelay(unsigned long); void make_cs1_contiguous(void); void omap_nand_switch_ecc(uint32_t, uint32_t); diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h index d5dbc22c18..2de205e74b 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h +++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h @@ -682,8 +682,7 @@ enum s5pc110_gpio_pin { S5PC110_GPIO_MP285, S5PC110_GPIO_MP286, S5PC110_GPIO_MP287, - S5PC110_GPIO_RES, - S5PC110_GPIO_H00 = (S5PC110_GPIO_RES + (48 * 8)), + S5PC110_GPIO_H00, S5PC110_GPIO_H01, S5PC110_GPIO_H02, S5PC110_GPIO_H03, @@ -815,11 +814,7 @@ static const struct gpio_name_num_table s5pc110_gpio_table[] = { void gpio_cfg_pin(int gpio, int cfg); void gpio_set_pull(int gpio, int mode); void gpio_set_drv(int gpio, int mode); -int gpio_direction_output(unsigned gpio, int value); -int gpio_set_value(unsigned gpio, int value); -int gpio_get_value(unsigned gpio); void gpio_set_rate(int gpio, int mode); -struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned gpio); int s5p_gpio_get_pin(unsigned gpio); /* GPIO pins per bank */ diff --git a/arch/arm/include/asm/arch-socfpga/spl.h b/arch/arm/include/asm/arch-socfpga/spl.h deleted file mode 100644 index 7e310d5a0c..0000000000 --- a/arch/arm/include/asm/arch-socfpga/spl.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2012 Pavel Machek <pavel@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _SOCFPGA_SPL_H_ -#define _SOCFPGA_SPL_H_ - -/* Symbols from linker script */ -extern char __malloc_start, __malloc_end, __stack_start; - -#define BOOT_DEVICE_RAM 1 - -#endif diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h index 5669f392fa..c562f621c2 100644 --- a/arch/arm/include/asm/arch-sunxi/clock.h +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -15,12 +15,17 @@ #define CLK_GATE_CLOSE 0x0 /* clock control module regs definition */ +#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) +#include <asm/arch/clock_sun6i.h> +#else #include <asm/arch/clock_sun4i.h> +#endif #ifndef __ASSEMBLY__ int clock_init(void); int clock_twi_onoff(int port, int state); void clock_set_pll1(unsigned int hz); +unsigned int clock_get_pll5p(void); unsigned int clock_get_pll6(void); void clock_init_safe(void); void clock_init_uart(void); diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h index 1ba997adf9..90af8e2506 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun4i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun4i.h @@ -199,13 +199,16 @@ struct sunxi_ccm_reg { #define CCM_PLL5_CTRL_M1_MASK CCM_PLL5_CTRL_M1(0x3) #define CCM_PLL5_CTRL_M1_X(n) ((n) - 1) #define CCM_PLL5_CTRL_K(n) (((n) & 0x3) << 4) +#define CCM_PLL5_CTRL_K_SHIFT 4 #define CCM_PLL5_CTRL_K_MASK CCM_PLL5_CTRL_K(0x3) #define CCM_PLL5_CTRL_K_X(n) ((n) - 1) #define CCM_PLL5_CTRL_LDO (0x1 << 7) #define CCM_PLL5_CTRL_N(n) (((n) & 0x1f) << 8) +#define CCM_PLL5_CTRL_N_SHIFT 8 #define CCM_PLL5_CTRL_N_MASK CCM_PLL5_CTRL_N(0x1f) #define CCM_PLL5_CTRL_N_X(n) (n) #define CCM_PLL5_CTRL_P(n) (((n) & 0x3) << 16) +#define CCM_PLL5_CTRL_P_SHIFT 16 #define CCM_PLL5_CTRL_P_MASK CCM_PLL5_CTRL_P(0x3) #define CCM_PLL5_CTRL_P_X(n) ((n) - 1) #define CCM_PLL5_CTRL_BW (0x1 << 18) diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h new file mode 100644 index 0000000000..1397b35889 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -0,0 +1,205 @@ +/* + * sun6i clock register definitions + * + * (C) Copyright 2007-2011 + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_CLOCK_SUN6I_H +#define _SUNXI_CLOCK_SUN6I_H + +struct sunxi_ccm_reg { + u32 pll1_cfg; /* 0x00 pll1 control */ + u32 reserved0; + u32 pll2_cfg; /* 0x08 pll2 control */ + u32 reserved1; + u32 pll3_cfg; /* 0x10 pll3 control */ + u32 reserved2; + u32 pll4_cfg; /* 0x18 pll4 control */ + u32 reserved3; + u32 pll5_cfg; /* 0x20 pll5 control */ + u32 reserved4; + u32 pll6_cfg; /* 0x28 pll6 control */ + u32 reserved5; + u32 pll7_cfg; /* 0x30 pll7 control */ + u32 reserved6; + u32 pll8_cfg; /* 0x38 pll8 control */ + u32 reserved7; + u32 mipi_pll_cfg; /* 0x40 MIPI pll control */ + u32 pll9_cfg; /* 0x44 pll9 control */ + u32 pll10_cfg; /* 0x48 pll10 control */ + u32 reserved8; + u32 cpu_axi_cfg; /* 0x50 CPU/AXI divide ratio */ + u32 ahb1_apb1_div; /* 0x54 AHB1/APB1 divide ratio */ + u32 apb2_div; /* 0x58 APB2 divide ratio */ + u32 axi_gate; /* 0x5c axi module clock gating */ + u32 ahb_gate0; /* 0x60 ahb module clock gating 0 */ + u32 ahb_gate1; /* 0x64 ahb module clock gating 1 */ + u32 apb1_gate; /* 0x68 apb1 module clock gating */ + u32 apb2_gate; /* 0x6c apb2 module clock gating */ + u32 reserved9[4]; + u32 nand0_clk_cfg; /* 0x80 nand0 clock control */ + u32 nand1_clk_cfg; /* 0x84 nand1 clock control */ + u32 sd0_clk_cfg; /* 0x88 sd0 clock control */ + u32 sd1_clk_cfg; /* 0x8c sd1 clock control */ + u32 sd2_clk_cfg; /* 0x90 sd2 clock control */ + u32 sd3_clk_cfg; /* 0x94 sd3 clock control */ + u32 ts_clk_cfg; /* 0x98 transport stream clock control */ + u32 ss_clk_cfg; /* 0x9c security system clock control */ + u32 spi0_clk_cfg; /* 0xa0 spi0 clock control */ + u32 spi1_clk_cfg; /* 0xa4 spi1 clock control */ + u32 spi2_clk_cfg; /* 0xa8 spi2 clock control */ + u32 spi3_clk_cfg; /* 0xac spi3 clock control */ + u32 i2s0_clk_cfg; /* 0xb0 I2S0 clock control*/ + u32 i2s1_clk_cfg; /* 0xb4 I2S1 clock control */ + u32 reserved10[2]; + u32 spdif_clk_cfg; /* 0xc0 SPDIF clock control */ + u32 reserved11[2]; + u32 usb_clk_cfg; /* 0xcc USB clock control */ + u32 gmac_clk_cfg; /* 0xd0 GMAC clock control */ + u32 reserved12[7]; + u32 mdfs_clk_cfg; /* 0xf0 MDFS clock control */ + u32 dram_clk_cfg; /* 0xf4 DRAM configuration clock control */ + u32 reserved13[2]; + u32 dram_clk_gate; /* 0x100 DRAM module gating */ + u32 be0_clk_cfg; /* 0x104 BE0 module clock */ + u32 be1_clk_cfg; /* 0x108 BE1 module clock */ + u32 fe0_clk_cfg; /* 0x10c FE0 module clock */ + u32 fe1_clk_cfg; /* 0x110 FE1 module clock */ + u32 mp_clk_cfg; /* 0x114 MP module clock */ + u32 lcd0_ch0_clk_cfg; /* 0x118 LCD0 CH0 module clock */ + u32 lcd1_ch0_clk_cfg; /* 0x11c LCD1 CH0 module clock */ + u32 reserved14[3]; + u32 lcd0_ch1_clk_cfg; /* 0x12c LCD0 CH1 module clock */ + u32 lcd1_ch1_clk_cfg; /* 0x130 LCD1 CH1 module clock */ + u32 csi0_clk_cfg; /* 0x134 CSI0 module clock */ + u32 csi1_clk_cfg; /* 0x138 CSI1 module clock */ + u32 ve_clk_cfg; /* 0x13c VE module clock */ + u32 adda_clk_cfg; /* 0x140 ADDA module clock */ + u32 avs_clk_cfg; /* 0x144 AVS module clock */ + u32 dmic_clk_cfg; /* 0x148 Digital Mic module clock*/ + u32 reserved15; + u32 hdmi_clk_cfg; /* 0x150 HDMI module clock */ + u32 ps_clk_cfg; /* 0x154 PS module clock */ + u32 mtc_clk_cfg; /* 0x158 MTC module clock */ + u32 mbus0_clk_cfg; /* 0x15c MBUS0 module clock */ + u32 mbus1_clk_cfg; /* 0x160 MBUS1 module clock */ + u32 reserved16; + u32 mipi_dsi_clk_cfg; /* 0x168 MIPI DSI clock control */ + u32 mipi_csi_clk_cfg; /* 0x16c MIPI CSI clock control */ + u32 reserved17[4]; + u32 iep_drc0_clk_cfg; /* 0x180 IEP DRC0 module clock */ + u32 iep_drc1_clk_cfg; /* 0x184 IEP DRC1 module clock */ + u32 iep_deu0_clk_cfg; /* 0x188 IEP DEU0 module clock */ + u32 iep_deu1_clk_cfg; /* 0x18c IEP DEU1 module clock */ + u32 reserved18[4]; + u32 gpu_core_clk_cfg; /* 0x1a0 GPU core clock config */ + u32 gpu_mem_clk_cfg; /* 0x1a4 GPU memory clock config */ + u32 gpu_hyd_clk_cfg; /* 0x1a0 GPU HYD clock config */ + u32 reserved19[21]; + u32 pll_lock; /* 0x200 PLL Lock Time */ + u32 pll1_lock; /* 0x204 PLL1 Lock Time */ + u32 reserved20[6]; + u32 pll1_bias_cfg; /* 0x220 PLL1 Bias config */ + u32 pll2_bias_cfg; /* 0x224 PLL2 Bias config */ + u32 pll3_bias_cfg; /* 0x228 PLL3 Bias config */ + u32 pll4_bias_cfg; /* 0x22c PLL4 Bias config */ + u32 pll5_bias_cfg; /* 0x230 PLL5 Bias config */ + u32 pll6_bias_cfg; /* 0x234 PLL6 Bias config */ + u32 pll7_bias_cfg; /* 0x238 PLL7 Bias config */ + u32 pll8_bias_cfg; /* 0x23c PLL8 Bias config */ + u32 mipi_bias_cfg; /* 0x240 MIPI Bias config */ + u32 pll9_bias_cfg; /* 0x244 PLL9 Bias config */ + u32 pll10_bias_cfg; /* 0x248 PLL10 Bias config */ + u32 reserved21[13]; + u32 pll1_pattern_cfg; /* 0x280 PLL1 Pattern config */ + u32 pll2_pattern_cfg; /* 0x284 PLL2 Pattern config */ + u32 pll3_pattern_cfg; /* 0x288 PLL3 Pattern config */ + u32 pll4_pattern_cfg; /* 0x28c PLL4 Pattern config */ + u32 pll5_pattern_cfg; /* 0x290 PLL5 Pattern config */ + u32 pll6_pattern_cfg; /* 0x294 PLL6 Pattern config */ + u32 pll7_pattern_cfg; /* 0x298 PLL7 Pattern config */ + u32 pll8_pattern_cfg; /* 0x29c PLL8 Pattern config */ + u32 mipi_pattern_cfg; /* 0x2a0 MIPI Pattern config */ + u32 pll9_pattern_cfg; /* 0x2a4 PLL9 Pattern config */ + u32 pll10_pattern_cfg; /* 0x2a8 PLL10 Pattern config */ + u32 reserved22[5]; + u32 ahb_reset0_cfg; /* 0x2c0 AHB1 Reset 0 config */ + u32 ahb_reset1_cfg; /* 0x2c4 AHB1 Reset 1 config */ + u32 ahb_reset2_cfg; /* 0x2c8 AHB1 Reset 2 config */ + u32 reserved23; + u32 apb1_reset_cfg; /* 0x2d0 APB1 Reset config */ + u32 reserved24; + u32 apb2_reset_cfg; /* 0x2d8 APB2 Reset config */ +}; + +/* apb2 bit field */ +#define APB2_CLK_SRC_LOSC (0x0 << 24) +#define APB2_CLK_SRC_OSC24M (0x1 << 24) +#define APB2_CLK_SRC_PLL6 (0x2 << 24) +#define APB2_CLK_SRC_MASK (0x3 << 24) +#define APB2_CLK_RATE_N_1 (0x0 << 16) +#define APB2_CLK_RATE_N_2 (0x1 << 16) +#define APB2_CLK_RATE_N_4 (0x2 << 16) +#define APB2_CLK_RATE_N_8 (0x3 << 16) +#define APB2_CLK_RATE_N_MASK (3 << 16) +#define APB2_CLK_RATE_M(m) (((m)-1) << 0) +#define APB2_CLK_RATE_M_MASK (0x1f << 0) + +/* apb2 gate field */ +#define APB2_GATE_UART_SHIFT (16) +#define APB2_GATE_UART_MASK (0xff << APB2_GATE_UART_SHIFT) +#define APB2_GATE_TWI_SHIFT (0) +#define APB2_GATE_TWI_MASK (0xf << APB2_GATE_TWI_SHIFT) + +/* cpu_axi_cfg bits */ +#define AXI_DIV_SHIFT 0 +#define ATB_DIV_SHIFT 8 +#define CPU_CLK_SRC_SHIFT 16 + +#define AXI_DIV_1 0 +#define AXI_DIV_2 1 +#define AXI_DIV_3 2 +#define AXI_DIV_4 3 +#define ATB_DIV_1 0 +#define ATB_DIV_2 1 +#define ATB_DIV_4 2 +#define CPU_CLK_SRC_OSC24M 1 +#define CPU_CLK_SRC_PLL1 2 + +#define PLL1_CFG_DEFAULT 0x90011b21 + +#define PLL6_CFG_DEFAULT 0x90041811 + +#define CCM_PLL6_CTRL_N_SHIFT 8 +#define CCM_PLL6_CTRL_N_MASK (0x1f << CCM_PLL6_CTRL_N_SHIFT) +#define CCM_PLL6_CTRL_K_SHIFT 4 +#define CCM_PLL6_CTRL_K_MASK (0x3 << CCM_PLL6_CTRL_K_SHIFT) + +#define AHB_GATE_OFFSET_MMC3 11 +#define AHB_GATE_OFFSET_MMC2 10 +#define AHB_GATE_OFFSET_MMC1 9 +#define AHB_GATE_OFFSET_MMC0 8 +#define AHB_GATE_OFFSET_MMC(n) (AHB_GATE_OFFSET_MMC0 + (n)) + +#define CCM_MMC_CTRL_OSCM24 (0x0 << 24) +#define CCM_MMC_CTRL_PLL6 (0x1 << 24) + +#define CCM_MMC_CTRL_ENABLE (0x1 << 31) + +#define AHB_RESET_OFFSET_MMC3 11 +#define AHB_RESET_OFFSET_MMC2 10 +#define AHB_RESET_OFFSET_MMC1 9 +#define AHB_RESET_OFFSET_MMC0 8 +#define AHB_RESET_OFFSET_MMC(n) (AHB_RESET_OFFSET_MMC0 + (n)) + +/* apb2 reset */ +#define APB2_RESET_UART_SHIFT (16) +#define APB2_RESET_UART_MASK (0xff << APB2_RESET_UART_SHIFT) +#define APB2_RESET_TWI_SHIFT (0) +#define APB2_RESET_TWI_MASK (0xf << APB2_RESET_TWI_SHIFT) + +#endif /* _SUNXI_CLOCK_SUN6I_H */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu.h b/arch/arm/include/asm/arch-sunxi/cpu.h index a987e51d57..0de79a0d50 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu.h +++ b/arch/arm/include/asm/arch-sunxi/cpu.h @@ -95,6 +95,11 @@ #define SUNXI_MALI400_BASE 0x01c40000 #define SUNXI_GMAC_BASE 0x01c50000 +#define SUNXI_DRAM_COM_BASE 0x01c62000 +#define SUNXI_DRAM_CTL_BASE 0x01c63000 +#define SUNXI_DRAM_PHY_CH1_BASE 0x01c65000 +#define SUNXI_DRAM_PHY_CH2_BASE 0x01c66000 + /* module sram */ #define SUNXI_SRAM_C_BASE 0x01d00000 @@ -105,6 +110,11 @@ #define SUNXI_MP_BASE 0x01e80000 #define SUNXI_AVG_BASE 0x01ea0000 +#define SUNXI_PRCM_BASE 0x01f01400 +#define SUNXI_R_UART_BASE 0x01f02800 +#define SUNXI_R_PIO_BASE 0x01f02c00 +#define SUNXI_P2WI_BASE 0x01f03400 + /* CoreSight Debug Module */ #define SUNXI_CSDM_BASE 0x3f500000 diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index f7f3d8c41a..7bb649950a 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -10,6 +10,7 @@ #define _SUNXI_GPIO_H #include <linux/types.h> +#include <asm/arch/cpu.h> /* * sunxi has 9 banks of gpio, they are: @@ -27,8 +28,27 @@ #define SUNXI_GPIO_G 6 #define SUNXI_GPIO_H 7 #define SUNXI_GPIO_I 8 + +/* + * This defines the number of GPIO banks for the _main_ GPIO controller. + * You should fix up the padding in struct sunxi_gpio_reg below if you + * change this. + */ #define SUNXI_GPIO_BANKS 9 +/* + * sun6i/sun8i and later SoCs have an additional GPIO controller (R_PIO) + * at a different register offset. + * + * sun6i has 2 banks: + * PL0 - PL8 | PM0 - PM7 + * + * sun8i has 1 bank: + * PL0 - PL11 + */ +#define SUNXI_GPIO_L 11 +#define SUNXI_GPIO_M 12 + struct sunxi_gpio { u32 cfg[4]; u32 dat; @@ -50,8 +70,9 @@ struct sunxi_gpio_reg { struct sunxi_gpio_int gpio_int; }; -#define BANK_TO_GPIO(bank) \ - &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] +#define BANK_TO_GPIO(bank) (((bank) < SUNXI_GPIO_L) ? \ + &((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \ + &((struct sunxi_gpio_reg *)SUNXI_R_PIO_BASE)->gpio_bank[(bank) - SUNXI_GPIO_L]) #define GPIO_BANK(pin) ((pin) >> 5) #define GPIO_NUM(pin) ((pin) & 0x1f) @@ -75,6 +96,8 @@ struct sunxi_gpio_reg { #define SUNXI_GPIO_G_NR 32 #define SUNXI_GPIO_H_NR 32 #define SUNXI_GPIO_I_NR 32 +#define SUNXI_GPIO_L_NR 32 +#define SUNXI_GPIO_M_NR 32 #define SUNXI_GPIO_NEXT(__gpio) \ ((__gpio##_START) + (__gpio##_NR) + 0) @@ -89,6 +112,8 @@ enum sunxi_gpio_number { SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F), SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G), SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H), + SUNXI_GPIO_L_START = 352, + SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L), }; /* SUNXI GPIO number definitions */ @@ -101,6 +126,8 @@ enum sunxi_gpio_number { #define SUNXI_GPG(_nr) (SUNXI_GPIO_G_START + (_nr)) #define SUNXI_GPH(_nr) (SUNXI_GPIO_H_START + (_nr)) #define SUNXI_GPI(_nr) (SUNXI_GPIO_I_START + (_nr)) +#define SUNXI_GPL(_nr) (SUNXI_GPIO_L_START + (_nr)) +#define SUNXI_GPM(_nr) (SUNXI_GPIO_M_START + (_nr)) /* GPIO pin function config */ #define SUNXI_GPIO_INPUT 0 @@ -117,6 +144,8 @@ enum sunxi_gpio_number { #define SUN5I_GPB19_UART0_TX 2 #define SUN5I_GPB20_UART0_RX 2 +#define SUN5I_GPG3_SDC1 2 + #define SUN5I_GPG3_UART1_TX 4 #define SUN5I_GPG4_UART1_RX 4 @@ -125,15 +154,27 @@ enum sunxi_gpio_number { #define SUNXI_GPF0_SDC0 2 #define SUNXI_GPF2_SDC0 2 + +#ifdef CONFIG_SUN8I +#define SUNXI_GPF2_UART0_TX 3 +#define SUNXI_GPF4_UART0_RX 3 +#else #define SUNXI_GPF2_UART0_TX 4 #define SUNXI_GPF4_UART0_RX 4 +#endif #define SUN4I_GPG0_SDC1 4 #define SUN4I_GPH22_SDC1 5 +#define SUN6I_GPH20_UART0_TX 2 +#define SUN6I_GPH21_UART0_RX 2 + #define SUN4I_GPI4_SDC3 2 +#define SUN8I_GPL2_R_UART_TX 2 +#define SUN8I_GPL3_R_UART_RX 2 + /* GPIO pin pull-up/down config */ #define SUNXI_GPIO_PULL_DISABLE 0 #define SUNXI_GPIO_PULL_UP 1 diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h index 53196e3b02..8a216740a7 100644 --- a/arch/arm/include/asm/arch-sunxi/mmc.h +++ b/arch/arm/include/asm/arch-sunxi/mmc.h @@ -43,7 +43,10 @@ struct sunxi_mmc { u32 chda; /* 0x90 */ u32 cbda; /* 0x94 */ u32 res1[26]; - u32 fifo; /* 0x100 FIFO access address */ +#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) + u32 res2[64]; +#endif + u32 fifo; /* 0x100 (0x200 on sun6i) FIFO access address */ }; #define SUNXI_MMC_CLK_POWERSAVE (0x1 << 17) @@ -120,5 +123,5 @@ struct sunxi_mmc { #define SUNXI_MMC_IDIE_TXIRQ (0x1 << 0) #define SUNXI_MMC_IDIE_RXIRQ (0x1 << 1) -int sunxi_mmc_init(int sdc_no); +struct mmc *sunxi_mmc_init(int sdc_no); #endif /* _SUNXI_MMC_H */ diff --git a/arch/arm/include/asm/arch-sunxi/prcm.h b/arch/arm/include/asm/arch-sunxi/prcm.h new file mode 100644 index 0000000000..3d3bfa6cd1 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/prcm.h @@ -0,0 +1,238 @@ +/* + * Sunxi A31 Power Management Unit register definition. + * + * (C) Copyright 2013 Oliver Schinagl <oliver@schinagl.nl> + * http://linux-sunxi.org + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Berg Xing <bergxing@allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_PRCM_H +#define _SUNXI_PRCM_H + +#define __PRCM_CPUS_CFG_PRE(n) (((n) & 0x3) << 4) +#define PRCM_CPUS_CFG_PRE_MASK __PRCM_CPUS_CFG_PRE(0x3) +#define __PRCM_CPUS_CFG_PRE_DIV(n) (((n) >> 1) - 1) +#define PRCM_CPUS_CFG_PRE_DIV(n) \ + __PRCM_CPUS_CFG_PRE(__PRCM_CPUS_CFG_CLK_PRE(n)) +#define __PRCM_CPUS_CFG_POST(n) (((n) & 0x1f) << 8) +#define PRCM_CPUS_CFG_POST_MASK __PRCM_CPUS_CFG_POST(0x1f) +#define __PRCM_CPUS_CFG_POST_DIV(n) ((n) - 1) +#define PRCM_CPUS_CFG_POST_DIV(n) \ + __PRCM_CPUS_CFG_POST_DIV(__PRCM_CPUS_CFG_POST_DIV(n)) +#define __PRCM_CPUS_CFG_CLK_SRC(n) (((n) & 0x3) << 16) +#define PRCM_CPUS_CFG_CLK_SRC_MASK __PRCM_CPUS_CFG_CLK_SRC(0x3) +#define __PRCM_CPUS_CFG_CLK_SRC_LOSC 0x0 +#define __PRCM_CPUS_CFG_CLK_SRC_HOSC 0x1 +#define __PRCM_CPUS_CFG_CLK_SRC_PLL6 0x2 +#define __PRCM_CPUS_CFG_CLK_SRC_PDIV 0x3 +#define PRCM_CPUS_CFG_CLK_SRC_LOSC \ + __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_LOSC) +#define PRCM_CPUS_CFG_CLK_SRC_HOSC \ + __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_HOSC) +#define PRCM_CPUS_CFG_CLK_SRC_PLL6 \ + __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PLL6) +#define PRCM_CPUS_CFG_CLK_SRC_PDIV \ + __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PDIV) + +#define __PRCM_APB0_RATIO(n) (((n) & 0x3) << 0) +#define PRCM_APB0_RATIO_DIV_MASK __PRCM_APB0_RATIO_DIV(0x3) +#define __PRCM_APB0_RATIO_DIV(n) (((n) >> 1) - 1) +#define PRCM_APB0_RATIO_DIV(n) \ + __PRCM_APB0_RATIO(__PRCM_APB0_RATIO_DIV(n)) + +#define PRCM_CPU_CFG_NEON_CLK_EN (0x1 << 0) +#define PRCM_CPU_CFG_CPU_CLK_EN (0x1 << 1) + +#define PRCM_APB0_GATE_PIO (0x1 << 0) +#define PRCM_APB0_GATE_IR (0x1 << 1) +#define PRCM_APB0_GATE_TIMER01 (0x1 << 2) +#define PRCM_APB0_GATE_P2WI (0x1 << 3) +#define PRCM_APB0_GATE_UART (0x1 << 4) +#define PRCM_APB0_GATE_1WIRE (0x1 << 5) +#define PRCM_APB0_GATE_I2C (0x1 << 6) + +#define PRCM_APB0_RESET_PIO (0x1 << 0) +#define PRCM_APB0_RESET_IR (0x1 << 1) +#define PRCM_APB0_RESET_TIMER01 (0x1 << 2) +#define PRCM_APB0_RESET_P2WI (0x1 << 3) +#define PRCM_APB0_RESET_UART (0x1 << 4) +#define PRCM_APB0_RESET_1WIRE (0x1 << 5) +#define PRCM_APB0_RESET_I2C (0x1 << 6) + +#define PRCM_PLL_CTRL_PLL_BIAS (0x1 << 0) +#define PRCM_PLL_CTRL_HOSC_GAIN_ENH (0x1 << 1) +#define __PRCM_PLL_CTRL_USB_CLK_SRC(n) (((n) & 0x3) << 4) +#define PRCM_PLL_CTRL_USB_CLK_SRC_MASK \ + __PRCM_PLL_CTRL_USB_CLK_SRC(0x3) +#define __PRCM_PLL_CTRL_USB_CLK_0 0x0 +#define __PRCM_PLL_CTRL_USB_CLK_1 0x1 +#define __PRCM_PLL_CTRL_USB_CLK_2 0x2 +#define __PRCM_PLL_CTRL_USB_CLK_3 0x3 +#define PRCM_PLL_CTRL_USB_CLK_0 \ + __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_0) +#define PRCM_PLL_CTRL_USB_CLK_1 \ + __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_1) +#define PRCM_PLL_CTRL_USB_CLK_2 \ + __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_2) +#define PRCM_PLL_CTRL_USB_CLK_3 \ + __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_3) +#define __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) (((n) & 0x3) << 12) +#define PRCM_PLL_CTRL_INT_PLL_IN_SEL_MASK \ + __PRCM_PLL_CTRL_INT_PLL_IN_SEL(0x3) +#define PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) \ + __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) +#define __PRCM_PLL_CTRL_HOSC_CLK_SEL(n) (((n) & 0x3) << 20) +#define PRCM_PLL_CTRL_HOSC_CLK_SEL_MASK \ + __PRCM_PLL_CTRL_HOSC_CLK_SEL(0x3) +#define __PRCM_PLL_CTRL_HOSC_CLK_0 0x0 +#define __PRCM_PLL_CTRL_HOSC_CLK_1 0x1 +#define __PRCM_PLL_CTRL_HOSC_CLK_2 0x2 +#define __PRCM_PLL_CTRL_HOSC_CLK_3 0x3 +#define PRCM_PLL_CTRL_HOSC_CLK_0 \ + __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_0) +#define PRCM_PLL_CTRL_HOSC_CLK_1 \ + __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_1) +#define PRCM_PLL_CTRL_HOSC_CLK_2 \ + __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_2) +#define PRCM_PLL_CTRL_HOSC_CLK_3 \ + __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_3) +#define PRCM_PLL_CTRL_PLL_TST_SRC_EXT (0x1 << 24) +#define PRCM_PLL_CTRL_LDO_DIGITAL_EN (0x1 << 0) +#define PRCM_PLL_CTRL_LDO_ANALOG_EN (0x1 << 1) +#define PRCM_PLL_CTRL_EXT_OSC_EN (0x1 << 2) +#define PRCM_PLL_CTRL_CLK_TST_EN (0x1 << 3) +#define PRCM_PLL_CTRL_IN_PWR_HIGH (0x1 << 15) /* 3.3 for hi 2.5 for lo */ +#define __PRCM_PLL_CTRL_VDD_LDO_OUT(n) (((n) & 0x7) << 16) +#define PRCM_PLL_CTRL_LDO_OUT_MASK \ + __PRCM_PLL_CTRL_LDO_OUT(0x7) +/* When using the low voltage 20 mV steps, and high voltage 30 mV steps */ +#define PRCM_PLL_CTRL_LDO_OUT_L(n) \ + __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7) +#define PRCM_PLL_CTRL_LDO_OUT_H(n) \ + __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7) +#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \ + __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000) +#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \ + __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160) +#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24) + +#define PRCM_CLK_1WIRE_GATE (0x1 << 31) + +#define __PRCM_CLK_MOD0_M(n) (((n) & 0xf) << 0) +#define PRCM_CLK_MOD0_M_MASK __PRCM_CLK_MOD0_M(0xf) +#define __PRCM_CLK_MOD0_M_X(n) (n - 1) +#define PRCM_CLK_MOD0_M(n) __PRCM_CLK_MOD0_M(__PRCM_CLK_MOD0_M_X(n)) +#define PRCM_CLK_MOD0_OUT_PHASE(n) (((n) & 0x7) << 8) +#define PRCM_CLK_MOD0_OUT_PHASE_MASK(n) PRCM_CLK_MOD0_OUT_PHASE(0x7) +#define _PRCM_CLK_MOD0_N(n) (((n) & 0x3) << 16) +#define PRCM_CLK_MOD0_N_MASK __PRCM_CLK_MOD_N(0x3) +#define __PRCM_CLK_MOD0_N_X(n) (((n) >> 1) - 1) +#define PRCM_CLK_MOD0_N(n) __PRCM_CLK_MOD0_N(__PRCM_CLK_MOD0_N_X(n)) +#define PRCM_CLK_MOD0_SMPL_PHASE(n) (((n) & 0x7) << 20) +#define PRCM_CLK_MOD0_SMPL_PHASE_MASK PRCM_CLK_MOD0_SMPL_PHASE(0x7) +#define PRCM_CLK_MOD0_SRC_SEL(n) (((n) & 0x7) << 24) +#define PRCM_CLK_MOD0_SRC_SEL_MASK PRCM_CLK_MOD0_SRC_SEL(0x7) +#define PRCM_CLK_MOD0_GATE_EN (0x1 << 31) + +#define PRCM_APB0_RESET_PIO (0x1 << 0) +#define PRCM_APB0_RESET_IR (0x1 << 1) +#define PRCM_APB0_RESET_TIMER01 (0x1 << 2) +#define PRCM_APB0_RESET_P2WI (0x1 << 3) +#define PRCM_APB0_RESET_UART (0x1 << 4) +#define PRCM_APB0_RESET_1WIRE (0x1 << 5) +#define PRCM_APB0_RESET_I2C (0x1 << 6) + +#define __PRCM_CLK_OUTD_M(n) (((n) & 0x7) << 8) +#define PRCM_CLK_OUTD_M_MASK __PRCM_CLK_OUTD_M(0x7) +#define __PRCM_CLK_OUTD_M_X() ((n) - 1) +#define PRCM_CLK_OUTD_M(n) __PRCM_CLK_OUTD_M(__PRCM_CLK_OUTD_M_X(n)) +#define __PRCM_CLK_OUTD_N(n) (((n) & 0x7) << 20) +#define PRCM_CLK_OUTD_N_MASK __PRCM_CLK_OUTD_N(0x7) +#define __PRCM_CLK_OUTD_N_X(n) (((n) >> 1) - 1) +#define PRCM_CLK_OUTD_N(n) __PRCM_CLK_OUTD_N(__PRCM_CLK_OUTD_N_X(n) +#define __PRCM_CLK_OUTD_SRC_SEL(n) (((n) & 0x3) << 24) +#define PRCM_CLK_OUTD_SRC_SEL_MASK __PRCM_CLK_OUTD_SRC_SEL(0x3) +#define __PRCM_CLK_OUTD_SRC_LOSC2 0x0 +#define __PRCM_CLK_OUTD_SRC_LOSC 0x1 +#define __PRCM_CLK_OUTD_SRC_HOSC 0x2 +#define __PRCM_CLK_OUTD_SRC_ERR 0x3 +#define PRCM_CLK_OUTD_SRC_LOSC2 \ +#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC2) +#define PRCM_CLK_OUTD_SRC_LOSC \ +#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC) +#define PRCM_CLK_OUTD_SRC_HOSC \ +#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_HOSC) +#define PRCM_CLK_OUTD_SRC_ERR \ +#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_ERR) +#define PRCM_CLK_OUTD_EN (0x1 << 31) + +#define PRCM_CPU0_PWROFF (0x1 << 0) +#define PRCM_CPU1_PWROFF (0x1 << 1) +#define PRCM_CPU2_PWROFF (0x1 << 2) +#define PRCM_CPU3_PWROFF (0x1 << 3) +#define PRCM_CPU_ALL_PWROFF (0xf << 0) + +#define PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF (0x1 << 0) +#define PRCM_VDD_SYS_DRAM_CH1_PAD_HOLD_PWROFF (0x1 << 1) +#define PRCM_VDD_SYS_AVCC_A_PWROFF (0x1 << 2) +#define PRCM_VDD_SYS_CPU0_VDD_PWROFF (0x1 << 3) + +#define PRCM_VDD_GPU_PWROFF (0x1 << 0) + +#define PRCM_VDD_SYS_RESET (0x1 << 0) + +#define PRCM_CPU1_PWR_CLAMP(n) (((n) & 0xff) << 0) +#define PRCM_CPU1_PWR_CLAMP_MASK PRCM_CPU1_PWR_CLAMP(0xff) + +#define PRCM_CPU2_PWR_CLAMP(n) (((n) & 0xff) << 0) +#define PRCM_CPU2_PWR_CLAMP_MASK PRCM_CPU2_PWR_CLAMP(0xff) + +#define PRCM_CPU3_PWR_CLAMP(n) (((n) & 0xff) << 0) +#define PRCM_CPU3_PWR_CLAMP_MASK PRCM_CPU3_PWR_CLAMP(0xff) + +#ifndef __ASSEMBLY__ +struct sunxi_prcm_reg { + u32 cpus_cfg; /* 0x000 */ + u8 res0[0x8]; /* 0x004 */ + u32 apb0_ratio; /* 0x00c */ + u32 cpu0_cfg; /* 0x010 */ + u32 cpu1_cfg; /* 0x014 */ + u32 cpu2_cfg; /* 0x018 */ + u32 cpu3_cfg; /* 0x01c */ + u8 res1[0x8]; /* 0x020 */ + u32 apb0_gate; /* 0x028 */ + u8 res2[0x14]; /* 0x02c */ + u32 pll_ctrl0; /* 0x040 */ + u32 pll_ctrl1; /* 0x044 */ + u8 res3[0x8]; /* 0x048 */ + u32 clk_1wire; /* 0x050 */ + u32 clk_ir; /* 0x054 */ + u8 res4[0x58]; /* 0x058 */ + u32 apb0_reset; /* 0x0b0 */ + u8 res5[0x3c]; /* 0x0b4 */ + u32 clk_outd; /* 0x0f0 */ + u8 res6[0xc]; /* 0x0f4 */ + u32 cpu_pwroff; /* 0x100 */ + u8 res7[0xc]; /* 0x104 */ + u32 vdd_sys_pwroff; /* 0x110 */ + u8 res8[0x4]; /* 0x114 */ + u32 gpu_pwroff; /* 0x118 */ + u8 res9[0x4]; /* 0x11c */ + u32 vdd_pwr_reset; /* 0x120 */ + u8 res10[0x20]; /* 0x124 */ + u32 cpu1_pwr_clamp; /* 0x144 */ + u32 cpu2_pwr_clamp; /* 0x148 */ + u32 cpu3_pwr_clamp; /* 0x14c */ + u8 res11[0x30]; /* 0x150 */ + u32 dram_pwr; /* 0x180 */ + u8 res12[0xc]; /* 0x184 */ + u32 dram_tst; /* 0x190 */ +}; + +void prcm_apb0_enable(u32 flags); +#endif /* __ASSEMBLY__ */ +#endif /* _PRCM_H */ diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h index 58e14fd0f7..03a0684c79 100644 --- a/arch/arm/include/asm/arch-sunxi/timer.h +++ b/arch/arm/include/asm/arch-sunxi/timer.h @@ -11,14 +11,10 @@ #ifndef _SUNXI_TIMER_H_ #define _SUNXI_TIMER_H_ -#define WDT_CTRL_RESTART (0x1 << 0) -#define WDT_CTRL_KEY (0x0a57 << 1) -#define WDT_MODE_EN (0x1 << 0) -#define WDT_MODE_RESET_EN (0x1 << 1) - #ifndef __ASSEMBLY__ #include <linux/types.h> +#include <asm/arch/watchdog.h> /* General purpose timer */ struct sunxi_timer { @@ -43,12 +39,6 @@ struct sunxi_64cnt { u32 hi; /* 0xa8 */ }; -/* Watchdog */ -struct sunxi_wdog { - u32 ctl; /* 0x90 */ - u32 mode; /* 0x94 */ -}; - /* Rtc */ struct sunxi_rtc { u32 ctl; /* 0x100 */ @@ -77,15 +67,20 @@ struct sunxi_timer_reg { struct sunxi_timer timer[6]; /* We have 6 timers */ u8 res2[16]; struct sunxi_avs avs; - struct sunxi_wdog wdog; - u8 res3[8]; - struct sunxi_64cnt cnt64; +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) + struct sunxi_wdog wdog; /* 0x90 */ + /* XXX the following is not accurate for sun5i/sun7i */ + struct sunxi_64cnt cnt64; /* 0xa0 */ u8 res4[0x58]; struct sunxi_rtc rtc; struct sunxi_alarm alarm; struct sunxi_tgp tgp[4]; u8 res5[8]; u32 cpu_cfg; +#else /* CONFIG_SUN6I || CONFIG_SUN8I || ... */ + u8 res3[16]; + struct sunxi_wdog wdog[5]; /* We have 5 watchdogs */ +#endif }; #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/arch-sunxi/watchdog.h b/arch/arm/include/asm/arch-sunxi/watchdog.h new file mode 100644 index 0000000000..ccc8fa32c4 --- /dev/null +++ b/arch/arm/include/asm/arch-sunxi/watchdog.h @@ -0,0 +1,44 @@ +/* + * (C) Copyright 2014 + * Chen-Yu Tsai <wens@csie.org> + * + * Watchdog register definitions + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SUNXI_WATCHDOG_H_ +#define _SUNXI_WATCHDOG_H_ + +#define WDT_CTRL_RESTART (0x1 << 0) +#define WDT_CTRL_KEY (0x0a57 << 1) + +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) + +#define WDT_MODE_EN (0x1 << 0) +#define WDT_MODE_RESET_EN (0x1 << 1) + +struct sunxi_wdog { + u32 ctl; /* 0x00 */ + u32 mode; /* 0x04 */ + u32 res[2]; +}; + +#else + +#define WDT_CFG_RESET (0x1) +#define WDT_MODE_EN (0x1) + +struct sunxi_wdog { + u32 irq_en; /* 0x00 */ + u32 irq_sta; /* 0x04 */ + u32 res1[2]; + u32 ctl; /* 0x10 */ + u32 cfg; /* 0x14 */ + u32 mode; /* 0x18 */ + u32 res2; +}; + +#endif + +#endif /* _SUNXI_WATCHDOG_H_ */ diff --git a/arch/arm/include/asm/arch-tegra/board.h b/arch/arm/include/asm/arch-tegra/board.h index ff773646cb..783bb3c0fa 100644 --- a/arch/arm/include/asm/arch-tegra/board.h +++ b/arch/arm/include/asm/arch-tegra/board.h @@ -24,10 +24,11 @@ void gpio_early_init(void); /* overrideable GPIO config */ * an empty stub function will be called. */ -void pinmux_init(void); /* overrideable general pinmux setup */ -void pin_mux_usb(void); /* overrideable USB pinmux setup */ -void pin_mux_spi(void); /* overrideable SPI pinmux setup */ -void pin_mux_nand(void); /* overrideable NAND pinmux setup */ -void pin_mux_display(void); /* overrideable DISPLAY pinmux setup */ +void pinmux_init(void); /* overridable general pinmux setup */ +void pin_mux_usb(void); /* overridable USB pinmux setup */ +void pin_mux_spi(void); /* overridable SPI pinmux setup */ +void pin_mux_nand(void); /* overridable NAND pinmux setup */ +void pin_mux_mmc(void); /* overridable mmc pinmux setup */ +void pin_mux_display(void); /* overridable DISPLAY pinmux setup */ #endif diff --git a/arch/arm/include/asm/arch-tegra114/mc.h b/arch/arm/include/asm/arch-tegra114/mc.h new file mode 100644 index 0000000000..044b1e0b39 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra114/mc.h @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2014 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA114_MC_H_ +#define _TEGRA114_MC_H_ + +/** + * Defines the memory controller registers we need/care about + */ +struct mc_ctlr { + u32 reserved0[4]; /* offset 0x00 - 0x0C */ + u32 mc_smmu_config; /* offset 0x10 */ + u32 mc_smmu_tlb_config; /* offset 0x14 */ + u32 mc_smmu_ptc_config; /* offset 0x18 */ + u32 mc_smmu_ptb_asid; /* offset 0x1C */ + u32 mc_smmu_ptb_data; /* offset 0x20 */ + u32 reserved1[3]; /* offset 0x24 - 0x2C */ + u32 mc_smmu_tlb_flush; /* offset 0x30 */ + u32 mc_smmu_ptc_flush; /* offset 0x34 */ + u32 reserved2[6]; /* offset 0x38 - 0x4C */ + u32 mc_emem_cfg; /* offset 0x50 */ + u32 mc_emem_adr_cfg; /* offset 0x54 */ + u32 mc_emem_adr_cfg_dev0; /* offset 0x58 */ + u32 mc_emem_adr_cfg_dev1; /* offset 0x5C */ + u32 reserved3[12]; /* offset 0x60 - 0x8C */ + u32 mc_emem_arb_reserved[28]; /* offset 0x90 - 0xFC */ + u32 reserved4[338]; /* offset 0x100 - 0x644 */ + u32 mc_video_protect_bom; /* offset 0x648 */ + u32 mc_video_protect_size_mb; /* offset 0x64c */ + u32 mc_video_protect_reg_ctrl; /* offset 0x650 */ +}; + +#endif /* _TEGRA114_MC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra114/tegra.h b/arch/arm/include/asm/arch-tegra114/tegra.h index 5d426b524a..c3d061ec58 100644 --- a/arch/arm/include/asm/arch-tegra114/tegra.h +++ b/arch/arm/include/asm/arch-tegra114/tegra.h @@ -19,6 +19,7 @@ #define NV_PA_SDRAM_BASE 0x80000000 /* 0x80000000 for real T114 */ #define NV_PA_TSC_BASE 0x700F0000 /* System Counter TSC regs */ +#define NV_PA_MC_BASE 0x70019000 #include <asm/arch-tegra/tegra.h> diff --git a/arch/arm/include/asm/arch-tegra114/tegra114_spi.h b/arch/arm/include/asm/arch-tegra114/tegra114_spi.h deleted file mode 100644 index 48197bc27f..0000000000 --- a/arch/arm/include/asm/arch-tegra114/tegra114_spi.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * NVIDIA Tegra SPI controller - * - * Copyright 2010-2013 NVIDIA Corporation - * - * This software may be used and distributed according to the - * terms of the GNU Public License, Version 2, incorporated - * herein by reference. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _TEGRA114_SPI_H_ -#define _TEGRA114_SPI_H_ - -#include <asm/types.h> - -int tegra114_spi_init(int *node_list, int count); -int tegra114_spi_cs_is_valid(unsigned int bus, unsigned int cs); -struct spi_slave *tegra114_spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode); -void tegra114_spi_free_slave(struct spi_slave *slave); -int tegra114_spi_claim_bus(struct spi_slave *slave); -void tegra114_spi_cs_activate(struct spi_slave *slave); -void tegra114_spi_cs_deactivate(struct spi_slave *slave); -int tegra114_spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *data_out, void *data_in, unsigned long flags); - -#endif /* _TEGRA114_SPI_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/mc.h b/arch/arm/include/asm/arch-tegra20/mc.h new file mode 100644 index 0000000000..9c6e3ffb6f --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/mc.h @@ -0,0 +1,36 @@ +/* + * (C) Copyright 2014 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA20_MC_H_ +#define _TEGRA20_MC_H_ + +/** + * Defines the memory controller registers we need/care about + */ +struct mc_ctlr { + u32 reserved0[3]; /* offset 0x00 - 0x08 */ + u32 mc_emem_cfg; /* offset 0x0C */ + u32 mc_emem_adr_cfg; /* offset 0x10 */ + u32 mc_emem_arb_cfg0; /* offset 0x14 */ + u32 mc_emem_arb_cfg1; /* offset 0x18 */ + u32 mc_emem_arb_cfg2; /* offset 0x1C */ + u32 reserved1; /* offset 0x20 */ + u32 mc_gart_cfg; /* offset 0x24 */ + u32 mc_gart_entry_addr; /* offset 0x28 */ + u32 mc_gart_entry_data; /* offset 0x2C */ + u32 mc_gart_error_req; /* offset 0x30 */ + u32 mc_gart_error_addr; /* offset 0x34 */ + u32 reserved2; /* offset 0x38 */ + u32 mc_timeout_ctrl; /* offset 0x3C */ + u32 reserved3[6]; /* offset 0x40 - 0x54 */ + u32 mc_decerr_emem_others_status; /* offset 0x58 */ + u32 mc_decerr_emem_others_adr; /* offset 0x5C */ + u32 reserved4[40]; /* offset 0x60 - 0xFC */ + u32 reserved5[93]; /* offset 0x100 - 0x270 */ +}; + +#endif /* _TEGRA20_MC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/tegra.h b/arch/arm/include/asm/arch-tegra20/tegra.h index 18856ac372..22774abb93 100644 --- a/arch/arm/include/asm/arch-tegra20/tegra.h +++ b/arch/arm/include/asm/arch-tegra20/tegra.h @@ -9,6 +9,7 @@ #define _TEGRA20_H_ #define NV_PA_SDRAM_BASE 0x00000000 +#define NV_PA_MC_BASE 0x7000F000 #include <asm/arch-tegra/tegra.h> diff --git a/arch/arm/include/asm/arch-tegra20/tegra20_sflash.h b/arch/arm/include/asm/arch-tegra20/tegra20_sflash.h deleted file mode 100644 index e8cc68c6ea..0000000000 --- a/arch/arm/include/asm/arch-tegra20/tegra20_sflash.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * NVIDIA Tegra20 SPI-FLASH controller - * - * Copyright 2010-2012 NVIDIA Corporation - * - * This software may be used and distributed according to the - * terms of the GNU Public License, Version 2, incorporated - * herein by reference. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _TEGRA20_SPI_H_ -#define _TEGRA20_SPI_H_ - -#include <asm/types.h> - -int tegra20_spi_cs_is_valid(unsigned int bus, unsigned int cs); -struct spi_slave *tegra20_spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode); -void tegra20_spi_free_slave(struct spi_slave *slave); -int tegra20_spi_init(int *node_list, int count); -int tegra20_spi_claim_bus(struct spi_slave *slave); -void tegra20_spi_cs_activate(struct spi_slave *slave); -void tegra20_spi_cs_deactivate(struct spi_slave *slave); -int tegra20_spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *data_out, void *data_in, unsigned long flags); - -#endif /* _TEGRA20_SPI_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/tegra20_slink.h b/arch/arm/include/asm/arch-tegra20/tegra20_slink.h deleted file mode 100644 index 5aa74ddd6d..0000000000 --- a/arch/arm/include/asm/arch-tegra20/tegra20_slink.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * NVIDIA Tegra SPI-SLINK controller - * - * Copyright 2010-2013 NVIDIA Corporation - * - * This software may be used and distributed according to the - * terms of the GNU Public License, Version 2, incorporated - * herein by reference. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _TEGRA30_SPI_H_ -#define _TEGRA30_SPI_H_ - -#include <asm/types.h> - -int tegra30_spi_init(int *node_list, int count); -int tegra30_spi_cs_is_valid(unsigned int bus, unsigned int cs); -struct spi_slave *tegra30_spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode); -void tegra30_spi_free_slave(struct spi_slave *slave); -int tegra30_spi_claim_bus(struct spi_slave *slave); -void tegra30_spi_cs_activate(struct spi_slave *slave); -void tegra30_spi_cs_deactivate(struct spi_slave *slave); -int tegra30_spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *data_out, void *data_in, unsigned long flags); - -#endif /* _TEGRA30_SPI_H_ */ diff --git a/arch/arm/include/asm/arch-tegra30/mc.h b/arch/arm/include/asm/arch-tegra30/mc.h new file mode 100644 index 0000000000..242a1fc64b --- /dev/null +++ b/arch/arm/include/asm/arch-tegra30/mc.h @@ -0,0 +1,38 @@ +/* + * (C) Copyright 2014 + * NVIDIA Corporation <www.nvidia.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA30_MC_H_ +#define _TEGRA30_MC_H_ + +/** + * Defines the memory controller registers we need/care about + */ +struct mc_ctlr { + u32 reserved0[4]; /* offset 0x00 - 0x0C */ + u32 mc_smmu_config; /* offset 0x10 */ + u32 mc_smmu_tlb_config; /* offset 0x14 */ + u32 mc_smmu_ptc_config; /* offset 0x18 */ + u32 mc_smmu_ptb_asid; /* offset 0x1C */ + u32 mc_smmu_ptb_data; /* offset 0x20 */ + u32 reserved1[3]; /* offset 0x24 - 0x2C */ + u32 mc_smmu_tlb_flush; /* offset 0x30 */ + u32 mc_smmu_ptc_flush; /* offset 0x34 */ + u32 mc_smmu_asid_security; /* offset 0x38 */ + u32 reserved2[5]; /* offset 0x3C - 0x4C */ + u32 mc_emem_cfg; /* offset 0x50 */ + u32 mc_emem_adr_cfg; /* offset 0x54 */ + u32 mc_emem_adr_cfg_dev0; /* offset 0x58 */ + u32 mc_emem_adr_cfg_dev1; /* offset 0x5C */ + u32 reserved3[12]; /* offset 0x60 - 0x8C */ + u32 mc_emem_arb_reserved[28]; /* offset 0x90 - 0xFC */ + u32 reserved4[338]; /* offset 0x100 - 0x644 */ + u32 mc_video_protect_bom; /* offset 0x648 */ + u32 mc_video_protect_size_mb; /* offset 0x64c */ + u32 mc_video_protect_reg_ctrl; /* offset 0x650 */ +}; + +#endif /* _TEGRA30_MC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra30/tegra.h b/arch/arm/include/asm/arch-tegra30/tegra.h index c02c5d8500..93671793a9 100644 --- a/arch/arm/include/asm/arch-tegra30/tegra.h +++ b/arch/arm/include/asm/arch-tegra30/tegra.h @@ -17,6 +17,7 @@ #ifndef _TEGRA30_H_ #define _TEGRA30_H_ +#define NV_PA_MC_BASE 0x7000F000 #define NV_PA_SDRAM_BASE 0x80000000 /* 0x80000000 for real T30 */ #include <asm/arch-tegra/tegra.h> diff --git a/arch/arm/include/asm/arch-uniphier/platdevice.h b/arch/arm/include/asm/arch-uniphier/platdevice.h new file mode 100644 index 0000000000..cdf7d132d4 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/platdevice.h @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_PLATDEVICE_H +#define ARCH_PLATDEVICE_H + +#include <dm/platdata.h> +#include <dm/platform_data/serial-uniphier.h> + +#define SERIAL_DEVICE(n, ba, clk) \ +static struct uniphier_serial_platform_data serial_device##n = { \ + .base = ba, \ + .uartclk = clk \ +}; \ +U_BOOT_DEVICE(serial##n) = { \ + .name = DRIVER_NAME, \ + .platdata = &serial_device##n \ +}; + +#endif /* ARCH_PLATDEVICE_H */ diff --git a/arch/arm/include/asm/imx-common/mxc_i2c.h b/arch/arm/include/asm/imx-common/mxc_i2c.h index 182c2f397f..af86163535 100644 --- a/arch/arm/include/asm/imx-common/mxc_i2c.h +++ b/arch/arm/include/asm/imx-common/mxc_i2c.h @@ -52,8 +52,8 @@ struct i2c_pads_info { &mx6q_##name : &mx6s_##name #endif -void setup_i2c(unsigned i2c_index, int speed, int slave_addr, - struct i2c_pads_info *p); +int setup_i2c(unsigned i2c_index, int speed, int slave_addr, + struct i2c_pads_info *p); void bus_i2c_init(void *base, int speed, int slave_addr, int (*idle_bus_fn)(void *p), void *p); int bus_i2c_read(void *base, uchar chip, uint addr, int alen, uchar *buf, diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h index 560924e83f..d4a447b2b8 100644 --- a/arch/arm/include/asm/mach-types.h +++ b/arch/arm/include/asm/mach-types.h @@ -1107,6 +1107,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_ARMADILLO_800EVA 3863 #define MACH_TYPE_KZM9G 4140 #define MACH_TYPE_COLIBRI_T30 4493 +#define MACH_TYPE_APALIS_T30 4513 #ifdef CONFIG_ARCH_EBSA110 # ifdef machine_arch_type @@ -14248,6 +14249,18 @@ extern unsigned int __machine_arch_type; # define machine_is_colibri_t30() (0) #endif +#ifdef CONFIG_MACH_APALIS_T30 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_APALIS_T30 +# endif +# define machine_is_apalis_t30() (machine_arch_type == MACH_TYPE_APALIS_T30) +#else +# define machine_is_apalis_t30() (0) +#endif + /* * These have not yet been registered */ diff --git a/arch/arm/include/asm/omap_gpio.h b/arch/arm/include/asm/omap_gpio.h index 5d25d04c3b..839af54d48 100644 --- a/arch/arm/include/asm/omap_gpio.h +++ b/arch/arm/include/asm/omap_gpio.h @@ -23,6 +23,21 @@ #include <asm/arch/cpu.h> +enum gpio_method { + METHOD_GPIO_24XX = 4, +}; + +#ifdef CONFIG_DM_GPIO + +/* Information about a GPIO bank */ +struct omap_gpio_platdata { + int bank_index; + ulong base; /* address of registers in physical memory */ + enum gpio_method method; +}; + +#else + struct gpio_bank { void *base; int method; @@ -30,8 +45,6 @@ struct gpio_bank { extern const struct gpio_bank *const omap_gpio_bank; -#define METHOD_GPIO_24XX 4 - /** * Check if gpio is valid. * @@ -39,4 +52,6 @@ extern const struct gpio_bank *const omap_gpio_bank; * @return 1 if ok, 0 on error */ int gpio_is_valid(int gpio); +#endif + #endif /* _GPIO_H_ */ diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h index e5daf89127..8acd7cd1bd 100644 --- a/arch/arm/include/asm/spl.h +++ b/arch/arm/include/asm/spl.h @@ -7,7 +7,7 @@ #ifndef _ASM_SPL_H_ #define _ASM_SPL_H_ -#if defined(CONFIG_OMAP) || defined(CONFIG_SOCFPGA) \ +#if defined(CONFIG_OMAP) \ || defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) \ || defined(CONFIG_EXYNOS4210) /* Platform-specific defines */ diff --git a/arch/arm/include/asm/arch-keystone/keystone_nav.h b/arch/arm/include/asm/ti-common/keystone_nav.h index ab81eaf1fd..696d8c6fc0 100644 --- a/arch/arm/include/asm/arch-keystone/keystone_nav.h +++ b/arch/arm/include/asm/ti-common/keystone_nav.h @@ -13,10 +13,6 @@ #include <asm/arch/hardware.h> #include <asm/io.h> -enum soc_type_t { - k2hk -}; - #define QM_OK 0 #define QM_ERR -1 #define QM_DESC_TYPE_HOST 0 @@ -173,6 +169,8 @@ struct pktdma_cfg { u32 rx_flow; /* flow that is used for RX */ }; +extern struct pktdma_cfg netcp_pktdma; + /* * packet dma user allocates memory for rx buffers * and describe it in the following structure @@ -184,10 +182,10 @@ struct rx_buff_desc { u32 rx_flow; }; -int netcp_close(void); -int netcp_init(struct rx_buff_desc *rx_buffers); -int netcp_send(u32 *pkt, int num_bytes, u32 swinfo2); -void *netcp_recv(u32 **pkt, int *num_bytes); -void netcp_release_rxhd(void *hd); +int ksnav_close(struct pktdma_cfg *pktdma); +int ksnav_init(struct pktdma_cfg *pktdma, struct rx_buff_desc *rx_buffers); +int ksnav_send(struct pktdma_cfg *pktdma, u32 *pkt, int num_bytes, u32 swinfo2); +void *ksnav_recv(struct pktdma_cfg *pktdma, u32 **pkt, int *num_bytes); +void ksnav_release_rxhd(struct pktdma_cfg *pktdma, void *hd); #endif /* _KEYSTONE_NAV_H_ */ diff --git a/arch/arm/include/asm/ti-common/keystone_net.h b/arch/arm/include/asm/ti-common/keystone_net.h new file mode 100644 index 0000000000..011c03cf88 --- /dev/null +++ b/arch/arm/include/asm/ti-common/keystone_net.h @@ -0,0 +1,249 @@ +/* + * emac definitions for keystone2 devices + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _KEYSTONE_NET_H_ +#define _KEYSTONE_NET_H_ + +#include <asm/io.h> + +/* EMAC */ +#ifdef CONFIG_KSNET_NETCP_V1_0 + +#define GBETH_BASE (CONFIG_KSNET_NETCP_BASE + 0x00090000) +#define EMAC_EMACSL_BASE_ADDR (GBETH_BASE + 0x900) +#define EMAC_MDIO_BASE_ADDR (GBETH_BASE + 0x300) +#define EMAC_SGMII_BASE_ADDR (GBETH_BASE + 0x100) +#define DEVICE_EMACSL_BASE(x) (EMAC_EMACSL_BASE_ADDR + (x) * 0x040) + +/* Register offsets */ +#define CPGMACSL_REG_CTL 0x04 +#define CPGMACSL_REG_STATUS 0x08 +#define CPGMACSL_REG_RESET 0x0c +#define CPGMACSL_REG_MAXLEN 0x10 + +#elif defined CONFIG_KSNET_NETCP_V1_5 + +#define GBETH_BASE (CONFIG_KSNET_NETCP_BASE + 0x00200000) +#define CPGMACSL_REG_RX_PRI_MAP 0x020 +#define EMAC_EMACSL_BASE_ADDR (GBETH_BASE + 0x22000) +#define EMAC_MDIO_BASE_ADDR (GBETH_BASE + 0x00f00) +#define EMAC_SGMII_BASE_ADDR (GBETH_BASE + 0x00100) +#define DEVICE_EMACSL_BASE(x) (EMAC_EMACSL_BASE_ADDR + (x) * 0x1000) + +/* Register offsets */ +#define CPGMACSL_REG_CTL 0x330 +#define CPGMACSL_REG_STATUS 0x334 +#define CPGMACSL_REG_RESET 0x338 +#define CPGMACSL_REG_MAXLEN 0x024 + +#endif + +#define KEYSTONE2_EMAC_GIG_ENABLE + +#define MAC_ID_BASE_ADDR CONFIG_KSNET_MAC_ID_BASE + +/* MDIO module input frequency */ +#define EMAC_MDIO_BUS_FREQ (clk_get_rate(pass_pll_clk)) +/* MDIO clock output frequency */ +#define EMAC_MDIO_CLOCK_FREQ 2500000 /* 2.5 MHz */ + +/* MII Status Register */ +#define MII_STATUS_REG 1 +#define MII_STATUS_LINK_MASK 0x4 + +#define MDIO_CONTROL_IDLE 0x80000000 +#define MDIO_CONTROL_ENABLE 0x40000000 +#define MDIO_CONTROL_FAULT_ENABLE 0x40000 +#define MDIO_CONTROL_FAULT 0x80000 +#define MDIO_USERACCESS0_GO 0x80000000 +#define MDIO_USERACCESS0_WRITE_READ 0x0 +#define MDIO_USERACCESS0_WRITE_WRITE 0x40000000 +#define MDIO_USERACCESS0_ACK 0x20000000 + +#define EMAC_MACCONTROL_MIIEN_ENABLE 0x20 +#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE 0x1 +#define EMAC_MACCONTROL_GIGABIT_ENABLE BIT(7) +#define EMAC_MACCONTROL_GIGFORCE BIT(17) +#define EMAC_MACCONTROL_RMIISPEED_100 BIT(15) + +#define EMAC_MIN_ETHERNET_PKT_SIZE 60 + +struct mac_sl_cfg { + u_int32_t max_rx_len; /* Maximum receive packet length. */ + u_int32_t ctl; /* Control bitfield */ +}; + +/** + * Definition: Control bitfields used in the ctl field of mac_sl_cfg + */ +#define GMACSL_RX_ENABLE_RCV_CONTROL_FRAMES BIT(24) +#define GMACSL_RX_ENABLE_RCV_SHORT_FRAMES BIT(23) +#define GMACSL_RX_ENABLE_RCV_ERROR_FRAMES BIT(22) +#define GMACSL_RX_ENABLE_EXT_CTL BIT(18) +#define GMACSL_RX_ENABLE_GIG_FORCE BIT(17) +#define GMACSL_RX_ENABLE_IFCTL_B BIT(16) +#define GMACSL_RX_ENABLE_IFCTL_A BIT(15) +#define GMACSL_RX_ENABLE_CMD_IDLE BIT(11) +#define GMACSL_TX_ENABLE_SHORT_GAP BIT(10) +#define GMACSL_ENABLE_GIG_MODE BIT(7) +#define GMACSL_TX_ENABLE_PACE BIT(6) +#define GMACSL_ENABLE BIT(5) +#define GMACSL_TX_ENABLE_FLOW_CTL BIT(4) +#define GMACSL_RX_ENABLE_FLOW_CTL BIT(3) +#define GMACSL_ENABLE_LOOPBACK BIT(1) +#define GMACSL_ENABLE_FULL_DUPLEX BIT(0) + +/* EMAC SL function return values */ +#define GMACSL_RET_OK 0 +#define GMACSL_RET_INVALID_PORT -1 +#define GMACSL_RET_WARN_RESET_INCOMPLETE -2 +#define GMACSL_RET_WARN_MAXLEN_TOO_BIG -3 +#define GMACSL_RET_CONFIG_FAIL_RESET_ACTIVE -4 + +/* EMAC SL register definitions */ +#define DEVICE_EMACSL_RESET_POLL_COUNT 100 + +/* Soft reset register values */ +#define CPGMAC_REG_RESET_VAL_RESET_MASK BIT(0) +#define CPGMAC_REG_RESET_VAL_RESET BIT(0) +#define CPGMAC_REG_MAXLEN_LEN 0x3fff + +/* CPSW */ +/* Control bitfields */ +#define CPSW_CTL_P2_PASS_PRI_TAGGED BIT(5) +#define CPSW_CTL_P1_PASS_PRI_TAGGED BIT(4) +#define CPSW_CTL_P0_PASS_PRI_TAGGED BIT(3) +#define CPSW_CTL_P0_ENABLE BIT(2) +#define CPSW_CTL_VLAN_AWARE BIT(1) +#define CPSW_CTL_FIFO_LOOPBACK BIT(0) + +#define DEVICE_CPSW_NUM_PORTS CONFIG_KSNET_CPSW_NUM_PORTS +#define DEVICE_N_GMACSL_PORTS (DEVICE_CPSW_NUM_PORTS - 1) + +#ifdef CONFIG_KSNET_NETCP_V1_0 + +#define DEVICE_CPSW_BASE (GBETH_BASE + 0x800) +#define CPSW_REG_CTL 0x004 +#define CPSW_REG_STAT_PORT_EN 0x00c +#define CPSW_REG_MAXLEN 0x040 +#define CPSW_REG_ALE_CONTROL 0x608 +#define CPSW_REG_ALE_PORTCTL(x) (0x640 + (x) * 4) +#define CPSW_REG_VAL_STAT_ENABLE_ALL 0xf + +#elif defined CONFIG_KSNET_NETCP_V1_5 + +#define DEVICE_CPSW_BASE (GBETH_BASE + 0x20000) +#define CPSW_REG_CTL 0x00004 +#define CPSW_REG_STAT_PORT_EN 0x00014 +#define CPSW_REG_MAXLEN 0x01024 +#define CPSW_REG_ALE_CONTROL 0x1e008 +#define CPSW_REG_ALE_PORTCTL(x) (0x1e040 + (x) * 4) +#define CPSW_REG_VAL_STAT_ENABLE_ALL 0x1ff + +#endif + +#define CPSW_REG_VAL_ALE_CTL_RESET_AND_ENABLE ((u_int32_t)0xc0000000) +#define CPSW_REG_VAL_ALE_CTL_BYPASS ((u_int32_t)0x00000010) +#define CPSW_REG_VAL_PORTCTL_FORWARD_MODE 0x3 + +#define target_get_switch_ctl() CPSW_CTL_P0_ENABLE +#define SWITCH_MAX_PKT_SIZE 9000 + +/* SGMII */ +#define SGMII_REG_STATUS_LOCK BIT(4) +#define SGMII_REG_STATUS_LINK BIT(0) +#define SGMII_REG_STATUS_AUTONEG BIT(2) +#define SGMII_REG_CONTROL_AUTONEG BIT(0) +#define SGMII_REG_CONTROL_MASTER BIT(5) +#define SGMII_REG_MR_ADV_ENABLE BIT(0) +#define SGMII_REG_MR_ADV_LINK BIT(15) +#define SGMII_REG_MR_ADV_FULL_DUPLEX BIT(12) +#define SGMII_REG_MR_ADV_GIG_MODE BIT(11) + +#define SGMII_LINK_MAC_MAC_AUTONEG 0 +#define SGMII_LINK_MAC_PHY 1 +#define SGMII_LINK_MAC_MAC_FORCED 2 +#define SGMII_LINK_MAC_FIBER 3 +#define SGMII_LINK_MAC_PHY_FORCED 4 + +#ifdef CONFIG_KSNET_NETCP_V1_0 +#define SGMII_OFFSET(x) ((x <= 1) ? (x * 0x100) : ((x * 0x100) + 0x100)) +#elif defined CONFIG_KSNET_NETCP_V1_5 +#define SGMII_OFFSET(x) ((x) * 0x100) +#endif + +#define SGMII_IDVER_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x000) +#define SGMII_SRESET_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x004) +#define SGMII_CTL_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x010) +#define SGMII_STATUS_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x014) +#define SGMII_MRADV_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x018) +#define SGMII_LPADV_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x020) +#define SGMII_TXCFG_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x030) +#define SGMII_RXCFG_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x034) +#define SGMII_AUXCFG_REG(x) (EMAC_SGMII_BASE_ADDR + SGMII_OFFSET(x) + 0x038) + +/* PSS */ +#ifdef CONFIG_KSNET_NETCP_V1_0 + +#define DEVICE_PSTREAM_CFG_REG_ADDR (CONFIG_KSNET_NETCP_BASE + 0x604) +#define DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI 0x06060606 +#define hw_config_streaming_switch()\ + writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI, DEVICE_PSTREAM_CFG_REG_ADDR); + +#elif defined CONFIG_KSNET_NETCP_V1_5 + +#define DEVICE_PSTREAM_CFG_REG_ADDR (CONFIG_KSNET_NETCP_BASE + 0x500) +#define DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI 0x0 + +#define hw_config_streaming_switch()\ + writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\ + DEVICE_PSTREAM_CFG_REG_ADDR);\ + writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\ + DEVICE_PSTREAM_CFG_REG_ADDR+4);\ + writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\ + DEVICE_PSTREAM_CFG_REG_ADDR+8);\ + writel(DEVICE_PSTREAM_CFG_VAL_ROUTE_CPPI,\ + DEVICE_PSTREAM_CFG_REG_ADDR+12); + +#endif + +/* EMAC MDIO Registers Structure */ +struct mdio_regs { + u32 version; + u32 control; + u32 alive; + u32 link; + u32 linkintraw; + u32 linkintmasked; + u32 rsvd0[2]; + u32 userintraw; + u32 userintmasked; + u32 userintmaskset; + u32 userintmaskclear; + u32 rsvd1[20]; + u32 useraccess0; + u32 userphysel0; + u32 useraccess1; + u32 userphysel1; +}; + +struct eth_priv_t { + char int_name[32]; + int rx_flow; + int phy_addr; + int slave_port; + int sgmii_link_type; + struct phy_device *phy_dev; +}; + +int keystone2_emac_initialize(struct eth_priv_t *eth_priv); +void sgmii_serdes_setup_156p25mhz(void); +void sgmii_serdes_shutdown(void); + +#endif /* _KEYSTONE_NET_H_ */ diff --git a/arch/arm/include/asm/ti-common/keystone_serdes.h b/arch/arm/include/asm/ti-common/keystone_serdes.h new file mode 100644 index 0000000000..2e92411404 --- /dev/null +++ b/arch/arm/include/asm/ti-common/keystone_serdes.h @@ -0,0 +1,55 @@ +/* + * Texas Instruments Keystone SerDes driver + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __TI_KEYSTONE_SERDES_H__ +#define __TI_KEYSTONE_SERDES_H__ + +/* SERDES Reference clock */ +enum ks2_serdes_clock { + SERDES_CLOCK_100M, /* 100 MHz */ + SERDES_CLOCK_122P88M, /* 122.88 MHz */ + SERDES_CLOCK_125M, /* 125 MHz */ + SERDES_CLOCK_156P25M, /* 156.25 MHz */ + SERDES_CLOCK_312P5M, /* 312.5 MHz */ +}; + +/* SERDES Lane Baud Rate */ +enum ks2_serdes_rate { + SERDES_RATE_4P9152G, /* 4.9152 GBaud */ + SERDES_RATE_5G, /* 5 GBaud */ + SERDES_RATE_6P144G, /* 6.144 GBaud */ + SERDES_RATE_6P25G, /* 6.25 GBaud */ + SERDES_RATE_10p3125g, /* 10.3215 GBaud */ + SERDES_RATE_12p5g, /* 12.5 GBaud */ +}; + +/* SERDES Lane Rate Mode */ +enum ks2_serdes_rate_mode { + SERDES_FULL_RATE, + SERDES_HALF_RATE, + SERDES_QUARTER_RATE, +}; + +/* SERDES PHY TYPE */ +enum ks2_serdes_interface { + SERDES_PHY_SGMII, + SERDES_PHY_PCSR, /* XGE SERDES */ +}; + +struct ks2_serdes { + enum ks2_serdes_clock clk; + enum ks2_serdes_rate rate; + enum ks2_serdes_rate_mode rate_mode; + enum ks2_serdes_interface intf; + u32 loopback; +}; + +int ks2_serdes_init(u32 base, struct ks2_serdes *serdes, u32 num_lanes); + +#endif /* __TI_KEYSTONE_SERDES_H__ */ diff --git a/arch/arm/include/asm/ti-common/ti-edma3.h b/arch/arm/include/asm/ti-common/ti-edma3.h new file mode 100644 index 0000000000..5adc1dac0e --- /dev/null +++ b/arch/arm/include/asm/ti-common/ti-edma3.h @@ -0,0 +1,121 @@ +/* + * Enhanced Direct Memory Access (EDMA3) Controller + * + * (C) Copyright 2014 + * Texas Instruments Incorporated, <www.ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _EDMA3_H_ +#define _EDMA3_H_ + +#include <linux/stddef.h> + +#define EDMA3_PARSET_NULL_LINK 0xffff + +/* + * All parameter RAM set options + * opt field in edma3_param_set_config structure + */ +#define EDMA3_SLOPT_PRIV_LEVEL BIT(31) +#define EDMA3_SLOPT_PRIV_ID(id) ((0xf & (id)) << 24) +#define EDMA3_SLOPT_INTERM_COMP_CHAIN_ENB BIT(23) +#define EDMA3_SLOPT_TRANS_COMP_CHAIN_ENB BIT(22) +#define EDMA3_SLOPT_INTERM_COMP_INT_ENB BIT(21) +#define EDMA3_SLOPT_TRANS_COMP_INT_ENB BIT(20) +#define EDMA3_SLOPT_COMP_CODE(code) ((0x3f & (code)) << 12) +#define EDMA3_SLOPT_FIFO_WIDTH_8 0 +#define EDMA3_SLOPT_FIFO_WIDTH_16 (1 << 8) +#define EDMA3_SLOPT_FIFO_WIDTH_32 (2 << 8) +#define EDMA3_SLOPT_FIFO_WIDTH_64 (3 << 8) +#define EDMA3_SLOPT_FIFO_WIDTH_128 (4 << 8) +#define EDMA3_SLOPT_FIFO_WIDTH_256 (5 << 8) +#define EDMA3_SLOPT_FIFO_WIDTH_SET(w) ((w & 0x7) << 8) +#define EDMA3_SLOPT_STATIC BIT(3) +#define EDMA3_SLOPT_AB_SYNC BIT(2) +#define EDMA3_SLOPT_DST_ADDR_CONST_MODE BIT(1) +#define EDMA3_SLOPT_SRC_ADDR_CONST_MODE BIT(0) + +enum edma3_address_mode { + INCR = 0, + FIFO = 1 +}; + +enum edma3_fifo_width { + W8BIT = 0, + W16BIT = 1, + W32BIT = 2, + W64BIT = 3, + W128BIT = 4, + W256BIT = 5 +}; + +enum edma3_sync_dimension { + ASYNC = 0, + ABSYNC = 1 +}; + +/* PaRAM slots are laid out like this */ +struct edma3_slot_layout { + u32 opt; + u32 src; + u32 a_b_cnt; + u32 dst; + u32 src_dst_bidx; + u32 link_bcntrld; + u32 src_dst_cidx; + u32 ccnt; +} __packed; + +/* + * Use this to assign trigger word number of edma3_slot_layout struct. + * trigger_word_name - is the exact name from edma3_slot_layout. + */ +#define EDMA3_TWORD(trigger_word_name)\ + (offsetof(struct edma3_slot_layout, trigger_word_name) / 4) + +struct edma3_slot_config { + u32 opt; + u32 src; + u32 dst; + int bcnt; + int acnt; + int ccnt; + int src_bidx; + int dst_bidx; + int src_cidx; + int dst_cidx; + int bcntrld; + int link; +}; + +struct edma3_channel_config { + int slot; + int chnum; + int complete_code; /* indicate pending complete interrupt */ + int trigger_slot_word; /* only used for qedma */ +}; + +void qedma3_start(u32 base, struct edma3_channel_config *cfg); +void qedma3_stop(u32 base, struct edma3_channel_config *cfg); +void edma3_slot_configure(u32 base, int slot, struct edma3_slot_config *cfg); +int edma3_check_for_transfer(u32 base, struct edma3_channel_config *cfg); +void edma3_write_slot(u32 base, int slot, struct edma3_slot_layout *param); +void edma3_read_slot(u32 base, int slot, struct edma3_slot_layout *param); + +void edma3_set_dest(u32 base, int slot, u32 dst, enum edma3_address_mode mode, + enum edma3_fifo_width width); +void edma3_set_dest_index(u32 base, unsigned slot, int bidx, int cidx); +void edma3_set_dest_addr(u32 base, int slot, u32 dst); + +void edma3_set_src(u32 base, int slot, u32 src, enum edma3_address_mode mode, + enum edma3_fifo_width width); +void edma3_set_src_index(u32 base, unsigned slot, int bidx, int cidx); +void edma3_set_src_addr(u32 base, int slot, u32 src); + +void edma3_set_transfer_params(u32 base, int slot, int acnt, + int bcnt, int ccnt, u16 bcnt_rld, + enum edma3_sync_dimension sync_mode); + +#endif diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h index b16694c72f..f97f3dd149 100644 --- a/arch/arm/include/asm/u-boot-arm.h +++ b/arch/arm/include/asm/u-boot-arm.h @@ -45,4 +45,19 @@ void reset_timer_masked (void); ulong get_timer_masked (void); void udelay_masked (unsigned long usec); +/* calls to c from vectors.S */ +void bad_mode(void); +void do_undefined_instruction(struct pt_regs *pt_regs); +void do_software_interrupt(struct pt_regs *pt_regs); +void do_prefetch_abort(struct pt_regs *pt_regs); +void do_data_abort(struct pt_regs *pt_regs); +void do_not_used(struct pt_regs *pt_regs); +#ifdef CONFIG_ARM64 +void do_fiq(struct pt_regs *pt_regs, unsigned int esr); +void do_irq(struct pt_regs *pt_regs, unsigned int esr); +#else +void do_fiq(struct pt_regs *pt_regs); +void do_irq(struct pt_regs *pt_regswq); +#endif + #endif /* _U_BOOT_ARM_H_ */ diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 76adaf3aa4..f6062557e6 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -34,6 +34,7 @@ #include <onenand_uboot.h> #include <mmc.h> #include <scsi.h> +#include <status_led.h> #include <libfdt.h> #include <fdtdec.h> #include <post.h> @@ -63,25 +64,15 @@ extern void dataflash_print_info(void); ************************************************************************ * May be supplied by boards if desired */ -inline void __coloured_LED_init(void) {} -void coloured_LED_init(void) - __attribute__((weak, alias("__coloured_LED_init"))); -inline void __red_led_on(void) {} -void red_led_on(void) __attribute__((weak, alias("__red_led_on"))); -inline void __red_led_off(void) {} -void red_led_off(void) __attribute__((weak, alias("__red_led_off"))); -inline void __green_led_on(void) {} -void green_led_on(void) __attribute__((weak, alias("__green_led_on"))); -inline void __green_led_off(void) {} -void green_led_off(void) __attribute__((weak, alias("__green_led_off"))); -inline void __yellow_led_on(void) {} -void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on"))); -inline void __yellow_led_off(void) {} -void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off"))); -inline void __blue_led_on(void) {} -void blue_led_on(void) __attribute__((weak, alias("__blue_led_on"))); -inline void __blue_led_off(void) {} -void blue_led_off(void) __attribute__((weak, alias("__blue_led_off"))); +__weak void coloured_LED_init(void) {} +__weak void red_led_on(void) {} +__weak void red_led_off(void) {} +__weak void green_led_on(void) {} +__weak void green_led_off(void) {} +__weak void yellow_led_on(void) {} +__weak void yellow_led_off(void) {} +__weak void blue_led_on(void) {} +__weak void blue_led_off(void) {} /* ************************************************************************ @@ -198,27 +189,21 @@ static int arm_pci_init(void) */ typedef int (init_fnc_t) (void); -void __dram_init_banksize(void) +__weak void dram_init_banksize(void) { gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; gd->bd->bi_dram[0].size = gd->ram_size; } -void dram_init_banksize(void) - __attribute__((weak, alias("__dram_init_banksize"))); -int __arch_cpu_init(void) +__weak int arch_cpu_init(void) { return 0; } -int arch_cpu_init(void) - __attribute__((weak, alias("__arch_cpu_init"))); -int __power_init_board(void) +__weak int power_init_board(void) { return 0; } -int power_init_board(void) - __attribute__((weak, alias("__power_init_board"))); /* Record the board_init_f() bootstage (after arch_cpu_init()) */ static int mark_bootstage(void) diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 4949d573af..cdb1975105 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -15,6 +15,7 @@ #include <common.h> #include <command.h> #include <image.h> +#include <vxworks.h> #include <u-boot/zlib.h> #include <asm/byteorder.h> #include <libfdt.h> diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c index f6b7c03578..9019736d2c 100644 --- a/arch/arm/lib/interrupts.c +++ b/arch/arm/lib/interrupts.c @@ -21,6 +21,7 @@ #include <common.h> #include <asm/proc-armv/ptrace.h> +#include <asm/u-boot-arm.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/arm/mvebu-common/Makefile b/arch/arm/mvebu-common/Makefile new file mode 100644 index 0000000000..9dcab6958c --- /dev/null +++ b/arch/arm/mvebu-common/Makefile @@ -0,0 +1,12 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <prafulla@marvell.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y = dram.o +obj-y += gpio.o +obj-$(CONFIG_ARMADA_XP) += mbus.o +obj-y += timer.o diff --git a/arch/arm/cpu/arm926ejs/kirkwood/dram.c b/arch/arm/mvebu-common/dram.c index d73ae47c34..db18791a86 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/dram.c +++ b/arch/arm/mvebu-common/dram.c @@ -10,31 +10,31 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/cpu.h> -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> DECLARE_GLOBAL_DATA_PTR; -struct kw_sdram_bank { +struct sdram_bank { u32 win_bar; u32 win_sz; }; -struct kw_sdram_addr_dec { - struct kw_sdram_bank sdram_bank[4]; +struct sdram_addr_dec { + struct sdram_bank sdram_bank[4]; }; -#define KW_REG_CPUCS_WIN_ENABLE (1 << 0) -#define KW_REG_CPUCS_WIN_WR_PROTECT (1 << 1) -#define KW_REG_CPUCS_WIN_WIN0_CS(x) (((x) & 0x3) << 2) -#define KW_REG_CPUCS_WIN_SIZE(x) (((x) & 0xff) << 24) +#define REG_CPUCS_WIN_ENABLE (1 << 0) +#define REG_CPUCS_WIN_WR_PROTECT (1 << 1) +#define REG_CPUCS_WIN_WIN0_CS(x) (((x) & 0x3) << 2) +#define REG_CPUCS_WIN_SIZE(x) (((x) & 0xff) << 24) /* - * kw_sdram_bar - reads SDRAM Base Address Register + * mvebu_sdram_bar - reads SDRAM Base Address Register */ -u32 kw_sdram_bar(enum memory_bank bank) +u32 mvebu_sdram_bar(enum memory_bank bank) { - struct kw_sdram_addr_dec *base = - (struct kw_sdram_addr_dec *)KW_REGISTER(0x1500); + struct sdram_addr_dec *base = + (struct sdram_addr_dec *)MVEBU_SDRAM_BASE; u32 result = 0; u32 enable = 0x01 & readl(&base->sdram_bank[bank].win_sz); @@ -46,31 +46,31 @@ u32 kw_sdram_bar(enum memory_bank bank) } /* - * kw_sdram_bs_set - writes SDRAM Bank size + * mvebu_sdram_bs_set - writes SDRAM Bank size */ -static void kw_sdram_bs_set(enum memory_bank bank, u32 size) +static void mvebu_sdram_bs_set(enum memory_bank bank, u32 size) { - struct kw_sdram_addr_dec *base = - (struct kw_sdram_addr_dec *)KW_REGISTER(0x1500); + struct sdram_addr_dec *base = + (struct sdram_addr_dec *)MVEBU_SDRAM_BASE; /* Read current register value */ u32 reg = readl(&base->sdram_bank[bank].win_sz); /* Clear window size */ - reg &= ~KW_REG_CPUCS_WIN_SIZE(0xFF); + reg &= ~REG_CPUCS_WIN_SIZE(0xFF); /* Set new window size */ - reg |= KW_REG_CPUCS_WIN_SIZE((size - 1) >> 24); + reg |= REG_CPUCS_WIN_SIZE((size - 1) >> 24); writel(reg, &base->sdram_bank[bank].win_sz); } /* - * kw_sdram_bs - reads SDRAM Bank size + * mvebu_sdram_bs - reads SDRAM Bank size */ -u32 kw_sdram_bs(enum memory_bank bank) +u32 mvebu_sdram_bs(enum memory_bank bank) { - struct kw_sdram_addr_dec *base = - (struct kw_sdram_addr_dec *)KW_REGISTER(0x1500); + struct sdram_addr_dec *base = + (struct sdram_addr_dec *)MVEBU_SDRAM_BASE; u32 result = 0; u32 enable = 0x01 & readl(&base->sdram_bank[bank].win_sz); @@ -81,15 +81,16 @@ u32 kw_sdram_bs(enum memory_bank bank) return result; } -void kw_sdram_size_adjust(enum memory_bank bank) +void mvebu_sdram_size_adjust(enum memory_bank bank) { u32 size; /* probe currently equipped RAM size */ - size = get_ram_size((void *)kw_sdram_bar(bank), kw_sdram_bs(bank)); + size = get_ram_size((void *)mvebu_sdram_bar(bank), + mvebu_sdram_bs(bank)); /* adjust SDRAM window size accordingly */ - kw_sdram_bs_set(bank, size); + mvebu_sdram_bs_set(bank, size); } #ifndef CONFIG_SYS_BOARD_DRAM_INIT @@ -99,8 +100,8 @@ int dram_init(void) gd->ram_size = 0; for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = kw_sdram_bar(i); - gd->bd->bi_dram[i].size = kw_sdram_bs(i); + gd->bd->bi_dram[i].start = mvebu_sdram_bar(i); + gd->bd->bi_dram[i].size = mvebu_sdram_bs(i); /* * It is assumed that all memory banks are consecutive * and without gaps. @@ -110,7 +111,13 @@ int dram_init(void) if (gd->bd->bi_dram[i].start != gd->ram_size) break; - gd->ram_size += gd->bd->bi_dram[i].size; + /* + * Don't report more than 3GiB of SDRAM, otherwise there is no + * address space left for the internal registers etc. + */ + if ((gd->ram_size + gd->bd->bi_dram[i].size != 0) && + (gd->ram_size + gd->bd->bi_dram[i].size <= (3 << 30))) + gd->ram_size += gd->bd->bi_dram[i].size; } diff --git a/arch/arm/mvebu-common/gpio.c b/arch/arm/mvebu-common/gpio.c new file mode 100644 index 0000000000..56e54e0a62 --- /dev/null +++ b/arch/arm/mvebu-common/gpio.c @@ -0,0 +1,30 @@ +/* + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +/* + * mvebu_config_gpio - GPIO configuration + */ +void mvebu_config_gpio(u32 gpp0_oe_val, u32 gpp1_oe_val, + u32 gpp0_oe, u32 gpp1_oe) +{ + struct kwgpio_registers *gpio0reg = + (struct kwgpio_registers *)MVEBU_GPIO0_BASE; + struct kwgpio_registers *gpio1reg = + (struct kwgpio_registers *)MVEBU_GPIO1_BASE; + + /* Init GPIOS to default values as per board requirement */ + writel(gpp0_oe_val, &gpio0reg->dout); + writel(gpp1_oe_val, &gpio1reg->dout); + writel(gpp0_oe, &gpio0reg->oe); + writel(gpp1_oe, &gpio1reg->oe); +} diff --git a/arch/arm/mvebu-common/mbus.c b/arch/arm/mvebu-common/mbus.c new file mode 100644 index 0000000000..05c9ef2cbb --- /dev/null +++ b/arch/arm/mvebu-common/mbus.c @@ -0,0 +1,471 @@ +/* + * Address map functions for Marvell EBU SoCs (Kirkwood, Armada + * 370/XP, Dove, Orion5x and MV78xx0) + * + * Ported from the Barebox version to U-Boot by: + * Stefan Roese <sr@denx.de> + * + * The Barebox version is: + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * based on mbus driver from Linux + * (C) Copyright 2008 Marvell Semiconductor + * + * SPDX-License-Identifier: GPL-2.0 + * + * The Marvell EBU SoCs have a configurable physical address space: + * the physical address at which certain devices (PCIe, NOR, NAND, + * etc.) sit can be configured. The configuration takes place through + * two sets of registers: + * + * - One to configure the access of the CPU to the devices. Depending + * on the families, there are between 8 and 20 configurable windows, + * each can be use to create a physical memory window that maps to a + * specific device. Devices are identified by a tuple (target, + * attribute). + * + * - One to configure the access to the CPU to the SDRAM. There are + * either 2 (for Dove) or 4 (for other families) windows to map the + * SDRAM into the physical address space. + * + * This driver: + * + * - Reads out the SDRAM address decoding windows at initialization + * time, and fills the mbus_dram_info structure with these + * informations. The exported function mv_mbus_dram_info() allow + * device drivers to get those informations related to the SDRAM + * address decoding windows. This is because devices also have their + * own windows (configured through registers that are part of each + * device register space), and therefore the drivers for Marvell + * devices have to configure those device -> SDRAM windows to ensure + * that DMA works properly. + * + * - Provides an API for platform code or device drivers to + * dynamically add or remove address decoding windows for the CPU -> + * device accesses. This API is mvebu_mbus_add_window_by_id(), + * mvebu_mbus_add_window_remap_by_id() and + * mvebu_mbus_del_window(). + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> +#include <linux/mbus.h> + +#define BIT(nr) (1UL << (nr)) + +/* DDR target is the same on all platforms */ +#define TARGET_DDR 0 + +/* CPU Address Decode Windows registers */ +#define WIN_CTRL_OFF 0x0000 +#define WIN_CTRL_ENABLE BIT(0) +#define WIN_CTRL_TGT_MASK 0xf0 +#define WIN_CTRL_TGT_SHIFT 4 +#define WIN_CTRL_ATTR_MASK 0xff00 +#define WIN_CTRL_ATTR_SHIFT 8 +#define WIN_CTRL_SIZE_MASK 0xffff0000 +#define WIN_CTRL_SIZE_SHIFT 16 +#define WIN_BASE_OFF 0x0004 +#define WIN_BASE_LOW 0xffff0000 +#define WIN_BASE_HIGH 0xf +#define WIN_REMAP_LO_OFF 0x0008 +#define WIN_REMAP_LOW 0xffff0000 +#define WIN_REMAP_HI_OFF 0x000c + +#define ATTR_HW_COHERENCY (0x1 << 4) + +#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3)) +#define DDR_BASE_CS_HIGH_MASK 0xf +#define DDR_BASE_CS_LOW_MASK 0xff000000 +#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3)) +#define DDR_SIZE_ENABLED BIT(0) +#define DDR_SIZE_CS_MASK 0x1c +#define DDR_SIZE_CS_SHIFT 2 +#define DDR_SIZE_MASK 0xff000000 + +#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4) + +struct mvebu_mbus_state; + +struct mvebu_mbus_soc_data { + unsigned int num_wins; + unsigned int num_remappable_wins; + unsigned int (*win_cfg_offset)(const int win); + void (*setup_cpu_target)(struct mvebu_mbus_state *s); +}; + +struct mvebu_mbus_state mbus_state + __attribute__ ((section(".data"))); +static struct mbus_dram_target_info mbus_dram_info + __attribute__ ((section(".data"))); + +/* + * Functions to manipulate the address decoding windows + */ + +static void mvebu_mbus_read_window(struct mvebu_mbus_state *mbus, + int win, int *enabled, u64 *base, + u32 *size, u8 *target, u8 *attr, + u64 *remap) +{ + void __iomem *addr = mbus->mbuswins_base + + mbus->soc->win_cfg_offset(win); + u32 basereg = readl(addr + WIN_BASE_OFF); + u32 ctrlreg = readl(addr + WIN_CTRL_OFF); + + if (!(ctrlreg & WIN_CTRL_ENABLE)) { + *enabled = 0; + return; + } + + *enabled = 1; + *base = ((u64)basereg & WIN_BASE_HIGH) << 32; + *base |= (basereg & WIN_BASE_LOW); + *size = (ctrlreg | ~WIN_CTRL_SIZE_MASK) + 1; + + if (target) + *target = (ctrlreg & WIN_CTRL_TGT_MASK) >> WIN_CTRL_TGT_SHIFT; + + if (attr) + *attr = (ctrlreg & WIN_CTRL_ATTR_MASK) >> WIN_CTRL_ATTR_SHIFT; + + if (remap) { + if (win < mbus->soc->num_remappable_wins) { + u32 remap_low = readl(addr + WIN_REMAP_LO_OFF); + u32 remap_hi = readl(addr + WIN_REMAP_HI_OFF); + *remap = ((u64)remap_hi << 32) | remap_low; + } else { + *remap = 0; + } + } +} + +static void mvebu_mbus_disable_window(struct mvebu_mbus_state *mbus, + int win) +{ + void __iomem *addr; + + addr = mbus->mbuswins_base + mbus->soc->win_cfg_offset(win); + + writel(0, addr + WIN_BASE_OFF); + writel(0, addr + WIN_CTRL_OFF); + if (win < mbus->soc->num_remappable_wins) { + writel(0, addr + WIN_REMAP_LO_OFF); + writel(0, addr + WIN_REMAP_HI_OFF); + } +} + +/* Checks whether the given window number is available */ +static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus, + const int win) +{ + void __iomem *addr = mbus->mbuswins_base + + mbus->soc->win_cfg_offset(win); + u32 ctrl = readl(addr + WIN_CTRL_OFF); + return !(ctrl & WIN_CTRL_ENABLE); +} + +/* + * Checks whether the given (base, base+size) area doesn't overlap an + * existing region + */ +static int mvebu_mbus_window_conflicts(struct mvebu_mbus_state *mbus, + phys_addr_t base, size_t size, + u8 target, u8 attr) +{ + u64 end = (u64)base + size; + int win; + + for (win = 0; win < mbus->soc->num_wins; win++) { + u64 wbase, wend; + u32 wsize; + u8 wtarget, wattr; + int enabled; + + mvebu_mbus_read_window(mbus, win, + &enabled, &wbase, &wsize, + &wtarget, &wattr, NULL); + + if (!enabled) + continue; + + wend = wbase + wsize; + + /* + * Check if the current window overlaps with the + * proposed physical range + */ + if ((u64)base < wend && end > wbase) + return 0; + + /* + * Check if target/attribute conflicts + */ + if (target == wtarget && attr == wattr) + return 0; + } + + return 1; +} + +static int mvebu_mbus_find_window(struct mvebu_mbus_state *mbus, + phys_addr_t base, size_t size) +{ + int win; + + for (win = 0; win < mbus->soc->num_wins; win++) { + u64 wbase; + u32 wsize; + int enabled; + + mvebu_mbus_read_window(mbus, win, + &enabled, &wbase, &wsize, + NULL, NULL, NULL); + + if (!enabled) + continue; + + if (base == wbase && size == wsize) + return win; + } + + return -ENODEV; +} + +static int mvebu_mbus_setup_window(struct mvebu_mbus_state *mbus, + int win, phys_addr_t base, size_t size, + phys_addr_t remap, u8 target, + u8 attr) +{ + void __iomem *addr = mbus->mbuswins_base + + mbus->soc->win_cfg_offset(win); + u32 ctrl, remap_addr; + + ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) | + (attr << WIN_CTRL_ATTR_SHIFT) | + (target << WIN_CTRL_TGT_SHIFT) | + WIN_CTRL_ENABLE; + + writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF); + writel(ctrl, addr + WIN_CTRL_OFF); + if (win < mbus->soc->num_remappable_wins) { + if (remap == MVEBU_MBUS_NO_REMAP) + remap_addr = base; + else + remap_addr = remap; + writel(remap_addr & WIN_REMAP_LOW, addr + WIN_REMAP_LO_OFF); + writel(0, addr + WIN_REMAP_HI_OFF); + } + + return 0; +} + +static int mvebu_mbus_alloc_window(struct mvebu_mbus_state *mbus, + phys_addr_t base, size_t size, + phys_addr_t remap, u8 target, + u8 attr) +{ + int win; + + if (remap == MVEBU_MBUS_NO_REMAP) { + for (win = mbus->soc->num_remappable_wins; + win < mbus->soc->num_wins; win++) + if (mvebu_mbus_window_is_free(mbus, win)) + return mvebu_mbus_setup_window(mbus, win, base, + size, remap, + target, attr); + } + + + for (win = 0; win < mbus->soc->num_wins; win++) + if (mvebu_mbus_window_is_free(mbus, win)) + return mvebu_mbus_setup_window(mbus, win, base, size, + remap, target, attr); + + return -ENOMEM; +} + +/* + * SoC-specific functions and definitions + */ + +static unsigned int armada_370_xp_mbus_win_offset(int win) +{ + /* The register layout is a bit annoying and the below code + * tries to cope with it. + * - At offset 0x0, there are the registers for the first 8 + * windows, with 4 registers of 32 bits per window (ctrl, + * base, remap low, remap high) + * - Then at offset 0x80, there is a hole of 0x10 bytes for + * the internal registers base address and internal units + * sync barrier register. + * - Then at offset 0x90, there the registers for 12 + * windows, with only 2 registers of 32 bits per window + * (ctrl, base). + */ + if (win < 8) + return win << 4; + else + return 0x90 + ((win - 8) << 3); +} + +static unsigned int orion5x_mbus_win_offset(int win) +{ + return win << 4; +} + +static void mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus) +{ + int i; + int cs; + + mbus_dram_info.mbus_dram_target_id = TARGET_DDR; + + for (i = 0, cs = 0; i < 4; i++) { + u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i)); + u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i)); + + /* + * We only take care of entries for which the chip + * select is enabled, and that don't have high base + * address bits set (devices can only access the first + * 32 bits of the memory). + */ + if ((size & DDR_SIZE_ENABLED) && + !(base & DDR_BASE_CS_HIGH_MASK)) { + struct mbus_dram_window *w; + + w = &mbus_dram_info.cs[cs++]; + w->cs_index = i; + w->mbus_attr = 0xf & ~(1 << i); +#if defined(CONFIG_ARMADA_XP) + w->mbus_attr |= ATTR_HW_COHERENCY; +#endif + w->base = base & DDR_BASE_CS_LOW_MASK; + w->size = (size | ~DDR_SIZE_MASK) + 1; + } + } + mbus_dram_info.num_cs = cs; +} + +static const struct mvebu_mbus_soc_data +armada_370_xp_mbus_data __maybe_unused = { + .num_wins = 20, + .num_remappable_wins = 8, + .win_cfg_offset = armada_370_xp_mbus_win_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, +}; + +static const struct mvebu_mbus_soc_data +kirkwood_mbus_data __maybe_unused = { + .num_wins = 8, + .num_remappable_wins = 4, + .win_cfg_offset = orion5x_mbus_win_offset, + .setup_cpu_target = mvebu_mbus_default_setup_cpu_target, +}; + +/* + * Public API of the driver + */ +const struct mbus_dram_target_info *mvebu_mbus_dram_info(void) +{ + return &mbus_dram_info; +} + +int mvebu_mbus_add_window_remap_by_id(unsigned int target, + unsigned int attribute, + phys_addr_t base, size_t size, + phys_addr_t remap) +{ + struct mvebu_mbus_state *s = &mbus_state; + + if (!mvebu_mbus_window_conflicts(s, base, size, target, attribute)) { + printf("Cannot add window '%x:%x', conflicts with another window\n", + target, attribute); + return -EINVAL; + } + + return mvebu_mbus_alloc_window(s, base, size, remap, target, attribute); +} + +int mvebu_mbus_add_window_by_id(unsigned int target, unsigned int attribute, + phys_addr_t base, size_t size) +{ + return mvebu_mbus_add_window_remap_by_id(target, attribute, base, + size, MVEBU_MBUS_NO_REMAP); +} + +int mvebu_mbus_del_window(phys_addr_t base, size_t size) +{ + int win; + + win = mvebu_mbus_find_window(&mbus_state, base, size); + if (win < 0) + return win; + + mvebu_mbus_disable_window(&mbus_state, win); + return 0; +} + +int mbus_dt_setup_win(struct mvebu_mbus_state *mbus, + u32 base, u32 size, u8 target, u8 attr) +{ + if (!mvebu_mbus_window_conflicts(mbus, base, size, target, attr)) { + printf("Cannot add window '%04x:%04x', conflicts with another window\n", + target, attr); + return -EBUSY; + } + + /* + * In U-Boot we first try to add the mbus window to the remap windows. + * If this fails, lets try to add the windows to the non-remap windows. + */ + if (mvebu_mbus_alloc_window(mbus, base, size, base, target, attr)) { + if (mvebu_mbus_alloc_window(mbus, base, size, + MVEBU_MBUS_NO_REMAP, target, attr)) + return -ENOMEM; + } + + return 0; +} + +int mvebu_mbus_probe(struct mbus_win windows[], int count) +{ + int win; + int ret; + int i; + +#if defined(CONFIG_KIRKWOOD) + mbus_state.soc = &kirkwood_mbus_data; +#endif +#if defined(CONFIG_ARMADA_XP) + mbus_state.soc = &armada_370_xp_mbus_data; +#endif + + mbus_state.mbuswins_base = (void __iomem *)MVEBU_CPU_WIN_BASE; + mbus_state.sdramwins_base = (void __iomem *)MVEBU_SDRAM_BASE; + + for (win = 0; win < mbus_state.soc->num_wins; win++) + mvebu_mbus_disable_window(&mbus_state, win); + + mbus_state.soc->setup_cpu_target(&mbus_state); + + /* Setup statically declared windows in the DT */ + for (i = 0; i < count; i++) { + u32 base, size; + u8 target, attr; + + target = windows[i].target; + attr = windows[i].attr; + base = windows[i].base; + size = windows[i].size; + ret = mbus_dt_setup_win(&mbus_state, base, size, target, attr); + if (ret < 0) + return ret; + } + + return 0; +} diff --git a/arch/arm/cpu/arm926ejs/kirkwood/timer.c b/arch/arm/mvebu-common/timer.c index a08f4a1456..40c4bc2da1 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/timer.c +++ b/arch/arm/mvebu-common/timer.c @@ -7,75 +7,68 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/kirkwood.h> +#include <asm/arch/soc.h> -#define UBOOT_CNTR 0 /* counter to use for uboot timer */ - -/* Timer reload and current value registers */ -struct kwtmr_val { - u32 reload; /* Timer reload reg */ - u32 val; /* Timer value reg */ -}; - -/* Timer registers */ -struct kwtmr_registers { - u32 ctrl; /* Timer control reg */ - u32 pad[3]; - struct kwtmr_val tmr[2]; - u32 wdt_reload; - u32 wdt_val; -}; - -struct kwtmr_registers *kwtmr_regs = (struct kwtmr_registers *)KW_TIMER_BASE; +#define UBOOT_CNTR 0 /* counter to use for U-Boot timer */ /* * ARM Timers Registers Map */ -#define CNTMR_CTRL_REG &kwtmr_regs->ctrl -#define CNTMR_RELOAD_REG(tmrnum) &kwtmr_regs->tmr[tmrnum].reload -#define CNTMR_VAL_REG(tmrnum) &kwtmr_regs->tmr[tmrnum].val +#define CNTMR_CTRL_REG &tmr_regs->ctrl +#define CNTMR_RELOAD_REG(tmrnum) &tmr_regs->tmr[tmrnum].reload +#define CNTMR_VAL_REG(tmrnum) &tmr_regs->tmr[tmrnum].val /* * ARM Timers Control Register * CPU_TIMERS_CTRL_REG (CTCR) */ #define CTCR_ARM_TIMER_EN_OFFS(cntr) (cntr * 2) -#define CTCR_ARM_TIMER_EN_MASK(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS) #define CTCR_ARM_TIMER_EN(cntr) (1 << CTCR_ARM_TIMER_EN_OFFS(cntr)) -#define CTCR_ARM_TIMER_DIS(cntr) (0 << CTCR_ARM_TIMER_EN_OFFS(cntr)) #define CTCR_ARM_TIMER_AUTO_OFFS(cntr) ((cntr * 2) + 1) -#define CTCR_ARM_TIMER_AUTO_MASK(cntr) (1 << 1) #define CTCR_ARM_TIMER_AUTO_EN(cntr) (1 << CTCR_ARM_TIMER_AUTO_OFFS(cntr)) -#define CTCR_ARM_TIMER_AUTO_DIS(cntr) (0 << CTCR_ARM_TIMER_AUTO_OFFS(cntr)) -/* - * ARM Timer\Watchdog Reload Register - * CNTMR_RELOAD_REG (TRR) - */ -#define TRG_ARM_TIMER_REL_OFFS 0 -#define TRG_ARM_TIMER_REL_MASK 0xffffffff +/* Only Armada XP have the 25MHz enable bit (Kirkwood doesn't) */ +#if defined(CONFIG_ARMADA_XP) +#define CTCR_ARM_TIMER_25MHZ_OFFS(cntr) (cntr + 11) +#define CTCR_ARM_TIMER_25MHZ(cntr) (1 << CTCR_ARM_TIMER_25MHZ_OFFS(cntr)) +#else +#define CTCR_ARM_TIMER_25MHZ(cntr) 0 +#endif -/* - * ARM Timer\Watchdog Register - * CNTMR_VAL_REG (TVRG) - */ -#define TVR_ARM_TIMER_OFFS 0 -#define TVR_ARM_TIMER_MASK 0xffffffff -#define TVR_ARM_TIMER_MAX 0xffffffff #define TIMER_LOAD_VAL 0xffffffff -#define READ_TIMER (readl(CNTMR_VAL_REG(UBOOT_CNTR)) / \ - (CONFIG_SYS_TCLK / 1000)) +#define timestamp gd->arch.tbl +#define lastdec gd->arch.lastinc + +/* Timer reload and current value registers */ +struct kwtmr_val { + u32 reload; /* Timer reload reg */ + u32 val; /* Timer value reg */ +}; + +/* Timer registers */ +struct kwtmr_registers { + u32 ctrl; /* Timer control reg */ + u32 pad[3]; + struct kwtmr_val tmr[4]; + u32 wdt_reload; + u32 wdt_val; +}; DECLARE_GLOBAL_DATA_PTR; -#define timestamp gd->arch.tbl -#define lastdec gd->arch.lastinc +static struct kwtmr_registers *tmr_regs = + (struct kwtmr_registers *)MVEBU_TIMER_BASE; + +static inline ulong read_timer(void) +{ + return readl(CNTMR_VAL_REG(UBOOT_CNTR)) / (CONFIG_SYS_TCLK / 1000); +} ulong get_timer_masked(void) { - ulong now = READ_TIMER; + ulong now = read_timer(); if (lastdec >= now) { /* normal mode */ @@ -119,20 +112,17 @@ void __udelay(unsigned long usec) */ int timer_init(void) { - unsigned int cntmrctrl; - /* load value into timer */ writel(TIMER_LOAD_VAL, CNTMR_RELOAD_REG(UBOOT_CNTR)); writel(TIMER_LOAD_VAL, CNTMR_VAL_REG(UBOOT_CNTR)); /* enable timer in auto reload mode */ - cntmrctrl = readl(CNTMR_CTRL_REG); - cntmrctrl |= CTCR_ARM_TIMER_EN(UBOOT_CNTR); - cntmrctrl |= CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR); - writel(cntmrctrl, CNTMR_CTRL_REG); + clrsetbits_le32(CNTMR_CTRL_REG, CTCR_ARM_TIMER_25MHZ(UBOOT_CNTR), + CTCR_ARM_TIMER_EN(UBOOT_CNTR) | + CTCR_ARM_TIMER_AUTO_EN(UBOOT_CNTR)); /* init the timestamp and lastdec value */ - lastdec = READ_TIMER; + lastdec = read_timer(); timestamp = 0; return 0; |
