summaryrefslogtreecommitdiffstats
path: root/arch/arm/cpu/ixp/npe/include/IxEthMii.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/cpu/ixp/npe/include/IxEthMii.h')
-rw-r--r--arch/arm/cpu/ixp/npe/include/IxEthMii.h270
1 files changed, 270 insertions, 0 deletions
diff --git a/arch/arm/cpu/ixp/npe/include/IxEthMii.h b/arch/arm/cpu/ixp/npe/include/IxEthMii.h
new file mode 100644
index 0000000000..397253a947
--- /dev/null
+++ b/arch/arm/cpu/ixp/npe/include/IxEthMii.h
@@ -0,0 +1,270 @@
+/**
+ * @file IxEthMii.h
+ *
+ * @brief this file contains the public API of @ref IxEthMii component
+ *
+ * Design notes :
+ * The main intent of this API is to inplement MII high level fonctionalitoes
+ * to support the codelets provided with the IXP400 software releases. It
+ * superceedes previous interfaces provided with @ref IxEThAcc component.
+ *
+ * This API has been tested with the PHYs provided with the
+ * IXP400 development platforms. It may not work for specific Ethernet PHYs
+ * used on specific boards.
+ *
+ * This source code detects and interface the LXT972, LXT973 and KS6995
+ * Ethernet PHYs.
+ *
+ * This source code should be considered as an example which may need
+ * to be adapted for different hardware implementations.
+ *
+ * It is strongly recommended to use public domain and GPL utilities
+ * like libmii, mii-diag for MII interface support.
+ *
+ *
+ *
+ * @par
+ * IXP400 SW Release version 2.0
+ *
+ * -- Copyright Notice --
+ *
+ * @par
+ * Copyright 2001-2005, Intel Corporation.
+ * All rights reserved.
+ *
+ * @par
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Intel Corporation nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @par
+ * -- End of Copyright Notice --
+ */
+
+#ifndef IxEthMii_H
+#define IxEthMii_H
+
+#include <IxTypes.h>
+
+/**
+ * @defgroup IxEthMii IXP400 Ethernet Phy Access (IxEthMii) API
+ *
+ * @brief ethMii is a library that does provides access to the
+ * Ethernet PHYs
+ *
+ *@{
+ */
+
+/**
+ * @ingroup IxEthMii
+ *
+ * @fn ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount)
+ *
+ * @brief Scan the MDIO bus for PHYs
+ * This function scans PHY addresses 0 through 31, and sets phyPresent[n] to
+ * TRUE if a phy is discovered at address n.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
+ *
+ * @param phyPresent BOOL [in] - boolean array of IXP425_ETH_ACC_MII_MAX_ADDR entries
+ * @param maxPhyCount UINT32 [in] - number of PHYs to search for (the scan will stop when
+ * the indicated number of PHYs is found).
+ *
+ * @return IX_STATUS
+ * - IX_ETH_ACC_SUCCESS
+ * - IX_ETH_ACC_FAIL : invalid arguments.
+ *
+ * <hr>
+ */
+PUBLIC IX_STATUS ixEthMiiPhyScan(BOOL phyPresent[], UINT32 maxPhyCount);
+
+/**
+ * @ingroup IxEthMii
+ *
+ * @fn ixEthMiiPhyConfig(UINT32 phyAddr,
+ BOOL speed100,
+ BOOL fullDuplex,
+ BOOL autonegotiate)
+ *
+ *
+ * @brief Configure a PHY
+ * Configure a PHY's speed, duplex and autonegotiation status
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
+ *
+ * @param phyAddr UINT32 [in]
+ * @param speed100 BOOL [in] - set to TRUE for 100Mbit/s operation, FALSE for 10Mbit/s
+ * @param fullDuplex BOOL [in] - set to TRUE for Full Duplex, FALSE for Half Duplex
+ * @param autonegotiate BOOL [in] - set to TRUE to enable autonegotiation
+ *
+ * @return IX_STATUS
+ * - IX_SUCCESS
+ * - IX_FAIL : invalid arguments.
+ *
+ * <hr>
+ */
+PUBLIC IX_STATUS ixEthMiiPhyConfig(UINT32 phyAddr,
+ BOOL speed100,
+ BOOL fullDuplex,
+ BOOL autonegotiate);
+
+/**
+ * @ingroup IxEthMii
+ *
+ * @fn ixEthMiiPhyLoopbackEnable(UINT32 phyAddr)
+ *
+ *
+ * @brief Enable PHY Loopback in a specific Eth MII port
+ *
+ * @note When PHY Loopback is enabled, frames sent out to the PHY from the
+ * IXP400 will be looped back to the IXP400. They will not be transmitted out
+ * on the wire.
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31)
+ *
+ * @return IX_STATUS
+ * - IX_SUCCESS
+ * - IX_FAIL : invalid arguments.
+ * <hr>
+ */
+PUBLIC IX_STATUS
+ixEthMiiPhyLoopbackEnable (UINT32 phyAddr);
+
+/**
+ * @ingroup IxEthMii
+ *
+ * @fn ixEthMiiPhyLoopbackDisable(UINT32 phyAddr)
+ *
+ *
+ * @brief Disable PHY Loopback in a specific Eth MII port
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31)
+ *
+ * @return IX_STATUS
+ * - IX_SUCCESS
+ * - IX_FAIL : invalid arguments.
+ * <hr>
+ */
+PUBLIC IX_STATUS
+ixEthMiiPhyLoopbackDisable (UINT32 phyAddr);
+
+/**
+ * @ingroup IxEthMii
+ *
+ * @fn ixEthMiiPhyReset(UINT32 phyAddr)
+ *
+ * @brief Reset a PHY
+ * Reset a PHY
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
+ *
+ * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31)
+ *
+ * @return IX_STATUS
+ * - IX_SUCCESS
+ * - IX_FAIL : invalid arguments.
+ *
+ * <hr>
+ */
+PUBLIC IX_STATUS ixEthMiiPhyReset(UINT32 phyAddr);
+
+
+/**
+ * @ingroup IxEthMii
+ *
+ * @fn ixEthMiiLinkStatus(UINT32 phyAddr,
+ BOOL *linkUp,
+ BOOL *speed100,
+ BOOL *fullDuplex,
+ BOOL *autoneg)
+ *
+ * @brief Retrieve the current status of a PHY
+ * Retrieve the link, speed, duplex and autonegotiation status of a PHY
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
+ *
+ * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31)
+ * @param linkUp BOOL [out] - set to TRUE if the link is up
+ * @param speed100 BOOL [out] - set to TRUE indicates 100Mbit/s, FALSE indicates 10Mbit/s
+ * @param fullDuplex BOOL [out] - set to TRUE indicates Full Duplex, FALSE indicates Half Duplex
+ * @param autoneg BOOL [out] - set to TRUE indicates autonegotiation is enabled, FALSE indicates autonegotiation is disabled
+ *
+ * @return IX_STATUS
+ * - IX_SUCCESS
+ * - IX_FAIL : invalid arguments.
+ *
+ * <hr>
+ */
+PUBLIC IX_STATUS ixEthMiiLinkStatus(UINT32 phyAddr,
+ BOOL *linkUp,
+ BOOL *speed100,
+ BOOL *fullDuplex,
+ BOOL *autoneg);
+
+/**
+ * @ingroup IxEthMii
+ *
+ * @fn ixEthMiiPhyShow (UINT32 phyAddr)
+ *
+ *
+ * @brief Display information on a specified PHY
+ * Display link status, speed, duplex and Auto Negotiation status
+ *
+ * - Reentrant - no
+ * - ISR Callable - no
+ *
+ * @pre The MAC on Ethernet Port 2 (NPE C) must be initialised, and generating the MDIO clock.
+ *
+ * @param phyAddr UINT32 [in] - the address of the Ethernet PHY (0-31)
+ *
+ * @return IX_STATUS
+ * - IX_SUCCESS
+ * - IX_FAIL : invalid arguments.
+ *
+ * <hr>
+ */
+PUBLIC IX_STATUS ixEthMiiPhyShow (UINT32 phyAddr);
+
+#endif /* ndef IxEthMii_H */
+/**
+ *@}
+ */
OpenPOWER on IntegriCloud