diff options
Diffstat (limited to 'arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc')
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc | 43 |
1 files changed, 43 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc index a4130cee50..8eee016f11 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc @@ -2,6 +2,7 @@ SoC overview 1. LS1043A 2. LS2080A + 3. LS1012A LS1043A --------- @@ -84,3 +85,45 @@ The LS2080A SoC includes the following function and features: - QorIQ platform's trust architecture 3.0 - Service processor (SP) provides pre-boot initialization and secure-boot capabilities + +LS1012A +-------- +The LS1012A features an advanced 64-bit ARM v8 Cortex- +A53 processor, with 32 KB of parity protected L1-I cache, +32 KB of ECC protected L1-D cache, as well as 256 KB of +ECC protected L2 cache. + +The LS1012A SoC includes the following function and features: + - One 64-bit ARM v8 Cortex-A53 core with the following capabilities: + - ARM v8 cryptography extensions + - One 16-bit DDR3L SDRAM memory controller, Up to 1.0 GT/s, Supports + 16-/8-bit operation (no ECC support) + - ARM core-link CCI-400 cache coherent interconnect + - Packet Forwarding Engine (PFE) + - Cryptography acceleration (SEC) + - Ethernet interfaces supported by PFE: + - One Configurable x3 SerDes: + Two Serdes PLLs supported for usage by any SerDes data lane + Support for up to 6 GBaud operation + - High-speed peripheral interfaces: + - One PCI Express Gen2 controller, supporting x1 operation + - One serial ATA (SATA Gen 3.0) controller + - One USB 3.0/2.0 controller with integrated PHY + - One USB 2.0 controller with ULPI interface. . + - Additional peripheral interfaces: + - One quad serial peripheral interface (QuadSPI) controller + - One serial peripheral interface (SPI) controller + - Two enhanced secure digital host controllers + - Two I2C controllers + - One 16550 compliant DUART (two UART interfaces) + - Two general purpose IOs (GPIO) + - Two FlexTimers + - Five synchronous audio interfaces (SAI) + - Pre-boot loader (PBL) provides pre-boot initialization and RCW loading + - Single-source clocking solution enabling generation of core, platform, + DDR, SerDes, and USB clocks from a single external crystal and internal + crystaloscillator + - Thermal monitor unit (TMU) with +/- 3C accuracy + - Two WatchDog timers + - ARM generic timer + - QorIQ platform's trust architecture 2.1 |
