diff options
Diffstat (limited to 'arch/arm/cpu/armv7')
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/boot-common.c | 126 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/hwinit-common.c | 2 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 3 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/board.c | 59 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap3/lowlevel_init.S | 10 |
6 files changed, 78 insertions, 124 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index f3725b267c..464a5d1d73 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -26,9 +26,7 @@ ifeq ($(CONFIG_SYS_DCACHE_OFF),) obj-y += omap-cache.o endif -ifeq ($(CONFIG_OMAP34XX),) obj-y += boot-common.o -endif obj-y += lowlevel_init.o obj-y += mem-common.o diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 7fc0a561b7..3e67d625a2 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -17,27 +17,28 @@ #include <asm/arch/sys_proto.h> #include <watchdog.h> #include <scsi.h> +#include <i2c.h> DECLARE_GLOBAL_DATA_PTR; void save_omap_boot_params(void) { - u32 rom_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); - u8 boot_device; - u32 dev_desc, dev_data; + u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); + struct omap_boot_parameters *omap_boot_params; + u32 boot_device; + u32 boot_mode; - if ((rom_params < NON_SECURE_SRAM_START) || - (rom_params > NON_SECURE_SRAM_END)) + if ((boot_params < NON_SECURE_SRAM_START) || + (boot_params > NON_SECURE_SRAM_END)) return; - /* - * rom_params can be type casted to omap_boot_parameters and - * used. But it not correct to assume that romcode structure - * encoding would be same as u-boot. So use the defined offsets. - */ - boot_device = *((u8 *)(rom_params + BOOT_DEVICE_OFFSET)); + omap_boot_params = (struct omap_boot_parameters *)boot_params; + + /* Boot device */ -#if defined(BOOT_DEVICE_NAND_I2C) + boot_device = omap_boot_params->boot_device; + +#ifdef BOOT_DEVICE_NAND_I2C /* * Re-map NAND&I2C boot-device to the "normal" NAND boot-device. * Otherwise the SPL boot IF can't handle this device correctly. @@ -47,29 +48,6 @@ void save_omap_boot_params(void) if (boot_device == BOOT_DEVICE_NAND_I2C) boot_device = BOOT_DEVICE_NAND; #endif - gd->arch.omap_boot_params.omap_bootdevice = boot_device; - - gd->arch.omap_boot_params.ch_flags = - *((u8 *)(rom_params + CH_FLAGS_OFFSET)); - - if ((boot_device >= MMC_BOOT_DEVICES_START) && - (boot_device <= MMC_BOOT_DEVICES_END)) { -#if !defined(CONFIG_AM33XX) && !defined(CONFIG_TI81XX) && \ - !defined(CONFIG_AM43XX) - if ((omap_hw_init_context() == - OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)) { - gd->arch.omap_boot_params.omap_bootmode = - *((u8 *)(rom_params + BOOT_MODE_OFFSET)); - } else -#endif - { - dev_desc = *((u32 *)(rom_params + DEV_DESC_PTR_OFFSET)); - dev_data = *((u32 *)(dev_desc + DEV_DATA_PTR_OFFSET)); - gd->arch.omap_boot_params.omap_bootmode = - *((u32 *)(dev_data + BOOT_MODE_OFFSET)); - } - } - #if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX) /* * We get different values for QSPI_1 and QSPI_4 being used, but @@ -77,31 +55,70 @@ void save_omap_boot_params(void) * mangle the later code, if we're coming in as QSPI_4 just * change to the QSPI_1 value. */ - if (gd->arch.omap_boot_params.omap_bootdevice == 11) - gd->arch.omap_boot_params.omap_bootdevice = BOOT_DEVICE_SPI; + if (boot_device == 11) + boot_device = BOOT_DEVICE_SPI; +#endif + + gd->arch.omap_boot_device = boot_device; + + /* Boot mode */ + + boot_mode = MMCSD_MODE_UNDEFINED; + + if ((boot_device >= MMC_BOOT_DEVICES_START) && + (boot_device <= MMC_BOOT_DEVICES_END)) { +#ifdef CONFIG_OMAP34XX + switch (boot_device) { + case BOOT_DEVICE_MMC1: + boot_mode = MMCSD_MODE_FS; + break; + case BOOT_DEVICE_MMC2: + boot_mode = MMCSD_MODE_RAW; + break; + } +#else + boot_params = omap_boot_params->boot_device_descriptor; + if ((boot_params < NON_SECURE_SRAM_START) || + (boot_params > NON_SECURE_SRAM_END)) + return; + + boot_params = *((u32 *)(boot_params + DEVICE_DATA_OFFSET)); + if ((boot_params < NON_SECURE_SRAM_START) || + (boot_params > NON_SECURE_SRAM_END)) + return; + + boot_mode = *((u32 *)(boot_params + BOOT_MODE_OFFSET)); + + if (boot_mode != MMCSD_MODE_FS && + boot_mode != MMCSD_MODE_RAW) +#ifdef CONFIG_SUPPORT_EMMC_BOOT + boot_mode = MMCSD_MODE_EMMCBOOT +#else + boot_mode = MMCSD_MODE_UNDEFINED; +#endif +#endif + } + + gd->arch.omap_boot_mode = boot_mode; + +#if !defined(CONFIG_TI814X) && !defined(CONFIG_TI816X) && \ + !defined(CONFIG_AM33XX) && !defined(CONFIG_AM43XX) + + /* CH flags */ + + gd->arch.omap_ch_flags = omap_boot_params->ch_flags; #endif } #ifdef CONFIG_SPL_BUILD u32 spl_boot_device(void) { - return (u32) (gd->arch.omap_boot_params.omap_bootdevice); + return gd->arch.omap_boot_device; } u32 spl_boot_mode(void) { - u32 val = gd->arch.omap_boot_params.omap_bootmode; - - if (val == MMCSD_MODE_RAW) - return MMCSD_MODE_RAW; - else if (val == MMCSD_MODE_FS) - return MMCSD_MODE_FS; - else -#ifdef CONFIG_SUPPORT_EMMC_BOOT - return MMCSD_MODE_EMMCBOOT; -#else - return MMCSD_MODE_UNDEFINED; -#endif + return gd->arch.omap_boot_mode; } void spl_board_init(void) @@ -116,9 +133,12 @@ void spl_board_init(void) /* Prepare console output */ preloader_console_init(); -#ifdef CONFIG_SPL_NAND_SUPPORT +#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) gpmc_init(); #endif +#ifdef CONFIG_SPL_I2C_SUPPORT + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); +#endif #if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT) arch_misc_init(); #endif @@ -150,9 +170,11 @@ void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) image_entry_noargs_t image_entry = (image_entry_noargs_t) spl_image->entry_point; + u32 boot_params = *((u32 *)OMAP_SRAM_SCRATCH_BOOT_PARAMS); + debug("image entry point: 0x%X\n", spl_image->entry_point); /* Pass the saved boot_params from rom code */ - image_entry((u32 *)&gd->arch.omap_boot_params); + image_entry((u32 *)boot_params); } #endif diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 6c8f3bcea4..80794f9c61 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -90,7 +90,9 @@ void __weak srcomp_enable(void) */ int arch_cpu_init(void) { +#ifdef CONFIG_SPL save_omap_boot_params(); +#endif return 0; } #endif /* CONFIG_ARCH_CPU_INIT */ diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 746df922c2..528313584f 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -16,8 +16,9 @@ #include <asm/arch/spl.h> #include <linux/linkage.h> -#ifndef CONFIG_OMAP34XX +#ifdef CONFIG_SPL ENTRY(save_boot_params) + ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS str r0, [r1] b save_boot_params_ret diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index b064c0cc83..17cb5b759b 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -18,7 +18,6 @@ */ #include <common.h> #include <dm.h> -#include <mmc.h> #include <spl.h> #include <asm/io.h> #include <asm/arch/sys_proto.h> @@ -27,8 +26,6 @@ #include <asm/armv7.h> #include <asm/gpio.h> #include <asm/omap_common.h> -#include <asm/arch/mmc_host_def.h> -#include <i2c.h> #include <linux/compiler.h> DECLARE_GLOBAL_DATA_PTR; @@ -73,62 +70,6 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx; #endif -#ifdef CONFIG_SPL_BUILD -/* -* We use static variables because global data is not ready yet. -* Initialized data is available in SPL right from the beginning. -* We would not typically need to save these parameters in regular -* U-Boot. This is needed only in SPL at the moment. -*/ -u32 omap3_boot_device = BOOT_DEVICE_NAND; - -/* auto boot mode detection is not possible for OMAP3 - hard code */ -u32 spl_boot_mode(void) -{ - switch (spl_boot_device()) { - case BOOT_DEVICE_MMC2: - return MMCSD_MODE_RAW; - case BOOT_DEVICE_MMC1: - return MMCSD_MODE_FS; - break; - default: - puts("spl: ERROR: unknown device - can't select boot mode\n"); - hang(); - } -} - -u32 spl_boot_device(void) -{ - return omap3_boot_device; -} - -int board_mmc_init(bd_t *bis) -{ - switch (spl_boot_device()) { - case BOOT_DEVICE_MMC1: - omap_mmc_init(0, 0, 0, -1, -1); - break; - case BOOT_DEVICE_MMC2: - case BOOT_DEVICE_MMC2_2: - omap_mmc_init(1, 0, 0, -1, -1); - break; - } - return 0; -} - -void spl_board_init(void) -{ - preloader_console_init(); -#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) - gpmc_init(); -#endif -#ifdef CONFIG_SPL_I2C_SUPPORT - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); -#endif -} -#endif /* CONFIG_SPL_BUILD */ - - /****************************************************************************** * Routine: secure_unlock * Description: Setup security registers for access diff --git a/arch/arm/cpu/armv7/omap3/lowlevel_init.S b/arch/arm/cpu/armv7/omap3/lowlevel_init.S index 249761308e..1e587723ce 100644 --- a/arch/arm/cpu/armv7/omap3/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap3/lowlevel_init.S @@ -16,16 +16,6 @@ #include <asm/arch/clocks_omap3.h> #include <linux/linkage.h> -#ifdef CONFIG_SPL_BUILD -ENTRY(save_boot_params) - ldr r4, =omap3_boot_device - ldr r5, [r0, #0x4] - and r5, r5, #0xff - str r5, [r4] - b save_boot_params_ret -ENDPROC(save_boot_params) -#endif - /* * Funtion for making PPA HAL API calls in secure devices * Input: |
