diff options
Diffstat (limited to 'arch/arm/cpu/armv7')
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/config_secure.mk | 66 |
1 files changed, 66 insertions, 0 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/config_secure.mk b/arch/arm/cpu/armv7/omap-common/config_secure.mk new file mode 100644 index 0000000000..c7bb101be8 --- /dev/null +++ b/arch/arm/cpu/armv7/omap-common/config_secure.mk @@ -0,0 +1,66 @@ +# +# Copyright (C) 2016, Texas Instruments, Incorporated - http://www.ti.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# +quiet_cmd_mkomapsecimg = MKIMAGE $@ +ifneq ($(TI_SECURE_DEV_PKG),) +ifneq ($(wildcard $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh),) +ifneq ($(CONFIG_SPL_BUILD),) +cmd_mkomapsecimg = $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh \ + $(patsubst u-boot-spl_HS_%,%,$(@F)) $< $@ $(CONFIG_ISW_ENTRY_ADDR) \ + $(if $(KBUILD_VERBOSE:1=), >/dev/null) +else +cmd_mkomapsecimg = $(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh \ + $(patsubst u-boot_HS_%,%,$(@F)) $< $@ $(CONFIG_ISW_ENTRY_ADDR) \ + $(if $(KBUILD_VERBOSE:1=), >/dev/null) +endif +else +cmd_mkomapsecimg = echo "WARNING:" \ + "$(TI_SECURE_DEV_PKG)/scripts/create-boot-image.sh not found." \ + "$@ was NOT created!" +endif +else +cmd_mkomapsecimg = echo "WARNING: TI_SECURE_DEV_PKG environment" \ + "variable must be defined for TI secure devices. $@ was NOT created!" +endif + +# Standard X-LOADER target (QPSI, NOR flash) +u-boot-spl_HS_X-LOADER: $(obj)/u-boot-spl.bin + $(call if_changed,mkomapsecimg) + +# For MLO targets (SD card boot) the final file name +# that is copied to the SD card fAT partition must +# be MLO, so we make a copy of the output file to a +# new file with that name +u-boot-spl_HS_MLO: $(obj)/u-boot-spl.bin + $(call if_changed,mkomapsecimg) + @if [ -f $@ ]; then \ + cp -f $@ MLO; \ + fi + +# Standard 2ND target (certain peripheral boot modes) +u-boot-spl_HS_2ND: $(obj)/u-boot-spl.bin + $(call if_changed,mkomapsecimg) + +# Standard ULO target (certain peripheral boot modes) +u-boot-spl_HS_ULO: $(obj)/u-boot-spl.bin + $(call if_changed,mkomapsecimg) + +# Standard ISSW target (certain devices, various boot modes) +u-boot-spl_HS_ISSW: $(obj)/u-boot-spl.bin + $(call if_changed,mkomapsecimg) + +# For SPI flash on AM335x and AM43xx, these +# require special byte swap handling so we use +# the SPI_X-LOADER target instead of X-LOADER +# and let the create-boot-image.sh script handle +# that +u-boot-spl_HS_SPI_X-LOADER: $(obj)/u-boot-spl.bin + $(call if_changed,mkomapsecimg) + +# For supporting single stage XiP QSPI on AM43xx, the +# image is a full u-boot file, not an SPL. In this case +# the mkomapsecimg command looks for a u-boot-HS_* prefix +u-boot_HS_XIP_X-LOADER: $(obj)/u-boot.bin + $(call if_changed,mkomapsecimg) |
