1 files changed, 316 insertions, 0 deletions
diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c
new file mode 100644
index 0000000000..eb8d425318
--- /dev/null
+++ b/arch/arm/cpu/arm720t/interrupts.c
@@ -0,0 +1,316 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <clps7111.h>
+#include <asm/proc-armv/ptrace.h>
+#include <asm/hardware.h>
+
+#ifndef CONFIG_NETARM
+/* we always count down the max. */
+#define TIMER_LOAD_VAL 0xffff
+/* macro to read the 16 bit timer */
+#define READ_TIMER (IO_TC1D & 0xffff)
+
+#ifdef CONFIG_LPC2292
+#undef READ_TIMER
+#define READ_TIMER (0xFFFFFFFF - GET32(T0TC))
+#endif
+
+#else
+#define IRQEN	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_INTR_ENABLE))
+#define TM2CTRL (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL))
+#define TM2STAT (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_STATUS))
+#define TIMER_LOAD_VAL NETARM_GEN_TSTAT_CTC_MASK
+#define READ_TIMER (TM2STAT & NETARM_GEN_TSTAT_CTC_MASK)
+#endif
+
+#ifdef CONFIG_S3C4510B
+/* require interrupts for the S3C4510B */
+# ifndef CONFIG_USE_IRQ
+#  error CONFIG_USE_IRQ _must_ be defined when using CONFIG_S3C4510B
+# else
+static struct _irq_handler IRQ_HANDLER[N_IRQS];
+# endif
+#endif	/* CONFIG_S3C4510B */
+
+#ifdef CONFIG_USE_IRQ
+void do_irq (struct pt_regs *pt_regs)
+{
+#if defined(CONFIG_S3C4510B)
+	unsigned int pending;
+
+	while ( (pending = GET_REG( REG_INTOFFSET)) != 0x54) {  /* sentinal value for no pending interrutps */
+		IRQ_HANDLER[pending>>2].m_func( IRQ_HANDLER[pending>>2].m_data);
+
+		/* clear pending interrupt */
+		PUT_REG( REG_INTPEND, (1<<(pending>>2)));
+	}
+#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
+	/* No do_irq() for IntegratorAP/CM720T as yet */
+#elif defined(CONFIG_LPC2292)
+
+    void (*pfnct)(void);
+
+    pfnct = (void (*)(void))VICVectAddr;
+
+    (*pfnct)();
+#else
+#error do_irq() not defined for this CPU type
+#endif
+}
+#endif
+
+#ifdef CONFIG_S3C4510B
+static void default_isr( void *data) {
+	printf ("default_isr():  called for IRQ %d\n", (int)data);
+}
+
+static void timer_isr( void *data) {
+	unsigned int *pTime = (unsigned int *)data;
+
+	(*pTime)++;
+	if ( !(*pTime % (CONFIG_SYS_HZ/4))) {
+		/* toggle LED 0 */
+		PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1);
+	}
+
+}
+#endif
+
+#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
+	/* Use IntegratorAP routines in board/integratorap.c */
+#else
+
+static ulong timestamp;
+static ulong lastdec;
+
+#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C4510B)
+int arch_interrupt_init (void)
+{
+	int i;
+
+	/* install default interrupt handlers */
+	for ( i = 0; i < N_IRQS; i++) {
+		IRQ_HANDLER[i].m_data = (void *)i;
+		IRQ_HANDLER[i].m_func = default_isr;
+	}
+
+	/* configure interrupts for IRQ mode */
+	PUT_REG( REG_INTMODE, 0x0);
+	/* clear any pending interrupts */
+	PUT_REG( REG_INTPEND, 0x1FFFFF);
+
+	lastdec = 0;
+
+	/* install interrupt handler for timer */
+	IRQ_HANDLER[INT_TIMER0].m_data = (void *)&timestamp;
+	IRQ_HANDLER[INT_TIMER0].m_func = timer_isr;
+
+	return 0;
+}
+#endif
+
+int timer_init (void)
+{
+#if defined(CONFIG_NETARM)
+	/* disable all interrupts */
+	IRQEN = 0;
+
+	/* operate timer 2 in non-prescale mode */
+	TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CONFIG_SYS_HZ) |
+		    NETARM_GEN_TCTL_ENABLE |
+		    NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL));
+
+	/* set timer 2 counter */
+	lastdec = TIMER_LOAD_VAL;
+#elif defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
+	/* disable all interrupts */
+	IO_INTMR1 = 0;
+
+	/* operate timer 1 in prescale mode */
+	IO_SYSCON1 |= SYSCON1_TC1M;
+
+	/* select 2kHz clock source for timer 1 */
+	IO_SYSCON1 &= ~SYSCON1_TC1S;
+
+	/* set timer 1 counter */
+	lastdec = IO_TC1D = TIMER_LOAD_VAL;
+#elif defined(CONFIG_S3C4510B)
+	/* configure free running timer 0 */
+	PUT_REG( REG_TMOD, 0x0);
+	/* Stop timer 0 */
+	CLR_REG( REG_TMOD, TM0_RUN);
+
+	/* Configure for interval mode */
+	CLR_REG( REG_TMOD, TM1_TOGGLE);
+
+	/*
+	 * Load Timer data register with count down value.
+	 * count_down_val = CONFIG_SYS_SYS_CLK_FREQ/CONFIG_SYS_HZ
+	 */
+	PUT_REG( REG_TDATA0, (CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ));
+
+	/*
+	 * Enable global interrupt
+	 * Enable timer0 interrupt
+	 */
+	CLR_REG( REG_INTMASK, ((1<<INT_GLOBAL) | (1<<INT_TIMER0)));
+
+	/* Start timer */
+	SET_REG( REG_TMOD, TM0_RUN);
+#elif defined(CONFIG_LPC2292)
+	PUT32(T0IR, 0);		/* disable all timer0 interrupts */
+	PUT32(T0TCR, 0);	/* disable timer0 */
+	PUT32(T0PR, CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ);
+	PUT32(T0MCR, 0);
+	PUT32(T0TC, 0);
+	PUT32(T0TCR, 1);	/* enable timer0 */
+
+#else
+#error No timer_init() defined for this CPU type
+#endif
+	timestamp = 0;
+
+	return (0);
+}
+
+#endif /* ! IntegratorAP */
+
+/*
+ * timer without interrupts
+ */
+
+
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO) || defined(CONFIG_LPC2292)
+
+void reset_timer (void)
+{
+	reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+	return get_timer_masked () - base;
+}
+
+void set_timer (ulong t)
+{
+	timestamp = t;
+}
+
+void __udelay (unsigned long usec)
+{
+	ulong tmo;
+
+	tmo = usec / 1000;
+	tmo *= CONFIG_SYS_HZ;
+	tmo /= 1000;
+
+	tmo += get_timer (0);
+
+	while (get_timer_masked () < tmo)
+#ifdef CONFIG_LPC2292
+		/* GJ - not sure whether this is really needed or a misunderstanding */
+		__asm__ __volatile__(" nop");
+#else
+		/*NOP*/;
+#endif
+}
+
+void reset_timer_masked (void)
+{
+	/* reset time */
+	lastdec = READ_TIMER;
+	timestamp = 0;
+}
+
+ulong get_timer_masked (void)
+{
+	ulong now = READ_TIMER;
+
+	if (lastdec >= now) {
+		/* normal mode */
+		timestamp += lastdec - now;
+	} else {
+		/* we have an overflow ... */
+		timestamp += lastdec + TIMER_LOAD_VAL - now;
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+void udelay_masked (unsigned long usec)
+{
+	ulong tmo;
+	ulong endtime;
+	signed long diff;
+
+	if (usec >= 1000) {
+		tmo = usec / 1000;
+		tmo *= CONFIG_SYS_HZ;
+		tmo /= 1000;
+	} else {
+		tmo = usec * CONFIG_SYS_HZ;
+		tmo /= (1000*1000);
+	}
+
+	endtime = get_timer_masked () + tmo;
+
+	do {
+		ulong now = get_timer_masked ();
+		diff = endtime - now;
+	} while (diff >= 0);
+}
+
+#elif defined(CONFIG_S3C4510B)
+
+ulong get_timer (ulong base)
+{
+	return timestamp - base;
+}
+
+void __udelay (unsigned long usec)
+{
+	u32 ticks;
+
+	ticks = (usec * CONFIG_SYS_HZ) / 1000000;
+
+	ticks += get_timer (0);
+
+	while (get_timer (0) < ticks)
+		/*NOP*/;
+
+}
+
+#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
+	/* No timer routines for IntegratorAP/CM720T as yet */
+#else
+#error Timer routines not defined for this CPU type
+#endif