diff options
Diffstat (limited to 'README')
| -rw-r--r-- | README | 19 |
1 files changed, 19 insertions, 0 deletions
@@ -670,6 +670,18 @@ The following options need to be configured: Set this to enable ATAPI support. +- LBA48 Support + CONFIG_LBA48 + + Set this to enable support for disks larger than 137GB + Also look at CFG_64BIT_LBA ,CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL + Whithout these , LBA48 support uses 32bit variables and will 'only' + support disks up to 2.1TB. + + CFG_64BIT_LBA: + When enabled, makes the IDE subsystem use 64bit sector addresses. + Default is 32bit. + - SCSI Support: At the moment only there is only support for the SYM53C8XX SCSI controller; define @@ -1713,6 +1725,13 @@ use the "saveenv" command to store a valid environment. - CFG_FAULT_MII_ADDR: MII address of the PHY to check for the Ethernet link state. +- CFG_64BIT_VSPRINTF: + Makes vsprintf (and all *printf functions) support printing + of 64bit values by using the L quantifier + +- CFG_64BIT_STRTOUL: + Adds simple_strtoull that returns a 64bit value + Low Level (hardware related) configuration options: --------------------------------------------------- |
