diff options
51 files changed, 3619 insertions, 239 deletions
@@ -1,3 +1,314 @@ +commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd +Author: Stefan Roese <sr@denx.de> +Date: Mon Jan 15 09:46:29 2007 +0100 + + [PATCH] Fix 440SPe rev B detection from previous patch + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit a443d31410c571ee8f970da819a44d698fdd6b1f +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Sun Jan 14 13:35:31 2007 +0100 + + [FIX] correct I2C Writes for the LM81 Sensor. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 0bba5452835f19a61204edcda3a58112fd8e2208 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Sat Jan 13 11:17:10 2007 +0100 + + Undo commit 3033ebb2: reset command does not take any arguments + + Haiying Wang's modification to the reset command was broken, undo it. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 95981778cff0038fd9941044d6a3eda810e33258 +Author: Stefan Roese <sr@denx.de> +Date: Sat Jan 13 08:01:03 2007 +0100 + + [PATCH] Update 440SP(e) cpu revisions + + Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7 +Author: Stefan Roese <sr@denx.de> +Date: Sat Jan 13 07:59:56 2007 +0100 + + [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed + + Now the board revision and the current PCI bus speed are printed after + the board message. + + Also the EBC initialising is now done via defines in the board config + file. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 36adff362c2c0141ff8a810d42a7e478f779130f +Author: Stefan Roese <sr@denx.de> +Date: Sat Jan 13 07:59:19 2007 +0100 + + [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed + + Now the board revision and the current PCI bus speed are printed after + the board message. + + Also the EBC initialising is now done via defines in the board config + file. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6 +Author: Stefan Roese <sr@denx.de> +Date: Sat Jan 13 07:57:51 2007 +0100 + + [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed + + Now the board revision and the current PCI bus speed are printed after + the board message. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6abaee42621c07e81a2cd189ad4368b5e8c50280 +Author: Reinhard Thies <Reinhard.Thies@web.de> +Date: Wed Jan 10 14:41:14 2007 +0100 + + Adjusted default environment for cam5200 board. + +commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Wed Jan 10 15:35:52 2007 +0100 + + Update CHANGELOG + +commit 787fa15860a57833e50bd30555079a9cd4e519b8 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Wed Jan 10 01:28:39 2007 +0100 + + Fix auto_update for MCC200 board. + + The invocation of do_auto_update() is moved to the end of the + misc_init_r() function, after the flash mappings have been + initialized. Please find attached a patch that implements that + change. + + Also correct the decoding of the keypad status. With this update, the + key that will trigger the update is Column 2, Row 2. + +commit d9384de2f571046e71081bae22b49e3d5ca2e3d5 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Jan 10 00:26:15 2007 +0100 + + CAM5200 flash driver modifications: + - use CFI driver (replaces custom flash driver) for main 'cam5200' target + - add second build target 'cam5200_niosflash' which still uses custom driver + +commit 67fea022fa957f59653b5238c7496f80a6b70432 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 16:02:48 2007 +0100 + + SPC1920: cleanup memory contoller setup + +commit 8fc2102faa23593c80381437c09f7745a14deb40 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 14:57:14 2007 +0100 + + Fix the cpu speed setup to work with all boards. + +commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 14:57:13 2007 +0100 + + SPC1920: add support for the FM18L08 Ramtron FRAM + +commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 14:57:13 2007 +0100 + + SPC1920: update the HPI register addresses to work with the second + generation of hardware + +commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:13 2007 +0100 + + Miscellanious spc1920 related cleanups + +commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 14:57:12 2007 +0100 + + SPC1920 GO/NOGO led should be set to color red in U-Boot + +commit 0be62728aac459ba268d6d752ed49ec0e2bc7348 +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:12 2007 +0100 + + Add support for the DS3231 RTC + +commit 8139567b60d678584b05f0718a681f2047c5e14f +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:11 2007 +0100 + + SMC1 uses external CLK4 instead of BRG on spc1920 + +commit d8d9de1a02fbd880b613d607143d1f57342affc7 +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:10 2007 +0100 + + Update the SPC1920 CMB PLD driver + +commit 3f34f869162750e5e999fd140f884f5de952bcfe +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:10 2007 +0100 + + Add / enable I2C support on the spc1920 board + +commit d28707dbce1e9ac2017ad051da4133bf22b4204f +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:10 2007 +0100 + + Add support for the tms320671x host port interface (HPI) + +commit f4eb54529bb3664c3a562e488b460fe075f79d67 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Sun Jan 7 00:13:11 2007 +0100 + + Prepare for release 1.2.0 + +commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02 +Author: Stefan Roese <sr@denx.de> +Date: Sat Jan 6 15:58:09 2007 +0100 + + [PATCH] 44x: Fix problem with DDR controller setup (refresh rate) + + This patch fixes a problem with an incorrect setup for the refresh + timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit f16c1da9577f06c5fc08651a4065537407de4635 +Author: Stefan Roese <sr@denx.de> +Date: Sat Jan 6 15:56:13 2007 +0100 + + [PATCH] Update ALPR board files + + This update brings the ALPR board support to the newest version. + It also fixes a problem with the NAND driver. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cd1d937f90250a32988c37b2b4af8364d25de8ed +Author: Stefan Roese <sr@denx.de> +Date: Fri Jan 5 11:46:05 2007 +0100 + + [PATCH] nand: Fix problem with oobsize calculation + + Here the description from Brian Brelsford <Brian_Brelsford@dell.com>: + + The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part + returns a 0x15. In the code fragment below bits [1:0] determine the + page size, it is ANDed via "(extid & 0x3)" then shifted out. The + next field is also ANDed with 0x3. However this is a one bit field + as defined in the Hynix and Samsung parts in the 4th ID byte that + determins the oobsize, not a two bit field. It works on Samsung as + bits[3:2] are 01. However for the Hynix there is a 11 in these two + bits, so the oob size gets messed up. + + I checked the correct linux code and the suggested fix from Brian is + also available in the linux nand mtd driver. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e +Author: Stefan Roese <sr@denx.de> +Date: Fri Jan 5 10:40:36 2007 +0100 + + [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx) + + This fix will make the MAL burst disabling patch for the Linux + EMAC driver obsolete. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 023889838282b6237b401664f22dd22dfba2c066 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jan 5 10:38:05 2007 +0100 + + [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board + + This code will optimize the DDR2 controller setup on a board specific + basis. + + Note: This code doesn't work right now on the NAND booting image for the + Sequoia board, since it doesn't fit into the 4kBytes for the SPL image. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cce4acbb68398634b8d011ed7bb0d12269c84230 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Dec 28 19:08:21 2006 +0100 + + Few V38B changes: + - fix a typo in V38B config file + - move watchdog initialisation earlier in the boot process + - add "wdt=off" to default kernel command line (disables kernel watchdog) + +commit 92eb729bad876725aeea908d2addba0800620840 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Wed Dec 27 01:26:13 2006 +0100 + + Fix bug in adaption of Stefano Babic's CFI driver patch. + +commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Sun Dec 24 01:42:57 2006 +0100 + + Minor code cleanup. + +commit d784fdb05900ada3686d5778783e1fb328e9fb66 +Author: Stefano Babic <sbabic@denx.de> +Date: Tue Dec 12 00:22:42 2006 +0100 + + Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode) + +commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2 +Author: Stefan Roese <sr@denx.de> +Date: Fri Dec 22 14:29:40 2006 +0100 + + [PATCH] Fix sequoia flash autodetection (finally correct) + + Now 32MByte and 64MByte FLASH is know to work and other + configurations should work too. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 82e5236a8b719543643fd26d5827938ab2b94818 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Fri Dec 22 10:30:26 2006 +0100 + + Minor code cleanup; update CHANGELOG. + +commit fa23044564091f05d9695beb7b5b9a931e7f41a4 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Thu Dec 21 17:17:02 2006 +0100 + + Added support for the TQM8272 board from TQ + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Thu Dec 21 16:14:48 2006 +0100 + + [PATCH] Add support for the UC101 board from MAN. + + Signed-off-by: Heiko Schocher <hs@denx.de> + commit c84bad0ef60e7055ab0bd49b93069509cecc382a Author: Bartlomiej Sieka <tur@semihalf.com> Date: Wed Dec 20 00:29:43 2006 +0100 @@ -210,7 +521,7 @@ Date: Mon Nov 27 17:04:06 2006 +0100 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 - arguments to bootm. It removes the getenv("disable_of") test that used + arguments to bootm. It removes the getenv("disable_of") test that used to be used for this purpose. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> @@ -908,7 +1219,7 @@ Date: Tue Oct 24 23:47:37 2006 -0500 If a Multi-Image file contains a third image we try to use it as a device tree. The device tree image is assumed to be uncompressed in the - image file. We automatically allocate space for the device tree in memory + image file. We automatically allocate space for the device tree in memory and provide an 8k pad to allow more than a reasonable amount of growth. Additionally, a device tree that was contained in flash will now automatically @@ -22,8 +22,8 @@ # VERSION = 1 -PATCHLEVEL = 1 -SUBLEVEL = 6 +PATCHLEVEL = 2 +SUBLEVEL = 0 EXTRAVERSION = U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) VERSION_FILE = $(obj)include/version_autogenerated.h @@ -557,6 +557,7 @@ Total5200_Rev2_lowboot_config: unconfig @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200 cam5200_config \ +cam5200_niosflash_config \ fo300_config \ MiniFAP_config \ TQM5200S_config \ @@ -574,6 +575,10 @@ TQM5200_STK100_config: unconfig echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ echo "... TQM5200S on Cam5200" ; \ } + @[ -z "$(findstring niosflash,$@)" ] || \ + { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \ + echo "... with NIOS flash driver" ; \ + } @[ -z "$(findstring fo300,$@)" ] || \ { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ echo "... TQM5200 on FO300" ; \ @@ -597,6 +602,8 @@ TQM5200_STK100_config: unconfig { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ } @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 +uc101_config: unconfig + @$(MKCONFIG) uc101 ppc mpc5xxx uc101 ######################################################################### ## MPC8xx Systems @@ -1193,7 +1200,7 @@ sequoia_nand_config: unconfig @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk -SOLIDCARD3_config:unconfig +solidcard3_config:unconfig @./mkconfig $(@:_config=) ppc ppc4xx solidcard3 sycamore_config: unconfig diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S index 3d4ac8543d..45bcd4bef7 100644 --- a/board/amcc/sequoia/init.S +++ b/board/amcc/sequoia/init.S @@ -90,7 +90,7 @@ tlbtab: /* * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I - */ + */ #ifndef CONFIG_NAND_SPL tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G ) #else diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c index 53f728def9..77f1438448 100644 --- a/board/amcc/sequoia/sdram.c +++ b/board/amcc/sequoia/sdram.c @@ -1,5 +1,12 @@ /* * (C) Copyright 2006 + * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com + * + * (C) Copyright 2006 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -18,10 +25,352 @@ * MA 02111-1307 USA */ +/* define DEBUG for debug output */ +#undef DEBUG + #include <common.h> #include <asm/processor.h> +#include <asm/io.h> #include <ppc440.h> +#include "sdram.h" + +#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \ + defined(CONFIG_DDR_DATA_EYE) +/*-----------------------------------------------------------------------------+ + * wait_for_dlllock. + +----------------------------------------------------------------------------*/ +static int wait_for_dlllock(void) +{ + unsigned long val; + int wait = 0; + + /* -----------------------------------------------------------+ + * Wait for the DCC master delay line to finish calibration + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_17); + val = DDR0_17_DLLLOCKREG_UNLOCKED; + + while (wait != 0xffff) { + val = mfdcr(ddrcfgd); + if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED) + /* dlllockreg bit on */ + return 0; + else + wait++; + } + debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val); + debug("Waiting for dlllockreg bit to raise\n"); + + return -1; +} +#endif + +#if defined(CONFIG_DDR_DATA_EYE) +/*-----------------------------------------------------------------------------+ + * wait_for_dram_init_complete. + +----------------------------------------------------------------------------*/ +int wait_for_dram_init_complete(void) +{ + unsigned long val; + int wait = 0; + + /* --------------------------------------------------------------+ + * Wait for 'DRAM initialization complete' bit in status register + * -------------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_00); + + while (wait != 0xffff) { + val = mfdcr(ddrcfgd); + if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6) + /* 'DRAM initialization complete' bit */ + return 0; + else + wait++; + } + + debug("DRAM initialization complete bit in status register did not rise\n"); + + return -1; +} + +#define NUM_TRIES 64 +#define NUM_READS 10 + +/*-----------------------------------------------------------------------------+ + * denali_core_search_data_eye. + +----------------------------------------------------------------------------*/ +void denali_core_search_data_eye(unsigned long memory_size) +{ + int k, j; + u32 val; + u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X; + u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0; + u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0; + u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0; + volatile u32 *ram_pointer; + u32 test[NUM_TRIES] = { + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 }; + + ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE); + + for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) { + /*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/ + + /* -----------------------------------------------------------+ + * De-assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + + /* -----------------------------------------------------------+ + * Set 'wr_dqs_shift' + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_09); + val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) + | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift); + mtdcr(ddrcfgd, val); + + /* -----------------------------------------------------------+ + * Set 'dqs_out_shift' = wr_dqs_shift + 32 + * ----------------------------------------------------------*/ + dqs_out_shift = wr_dqs_shift + 32; + mtdcr(ddrcfga, DDR0_22); + val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) + | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift); + mtdcr(ddrcfgd, val); + + passing_cases = 0; + + for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) { + /*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/ + /* -----------------------------------------------------------+ + * Set 'dll_dqs_delay_X'. + * ----------------------------------------------------------*/ + /* dll_dqs_delay_0 */ + mtdcr(ddrcfga, DDR0_17); + val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK) + | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + /* dll_dqs_delay_1 to dll_dqs_delay_4 */ + mtdcr(ddrcfga, DDR0_18); + val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK) + | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + /* dll_dqs_delay_5 to dll_dqs_delay_8 */ + mtdcr(ddrcfga, DDR0_19); + val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK) + | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + + ppcMsync(); + ppcMbar(); + + /* -----------------------------------------------------------+ + * Assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON; + mtdcr(ddrcfgd, val); + + ppcMsync(); + ppcMbar(); + + /* -----------------------------------------------------------+ + * Wait for the DCC master delay line to finish calibration + * ----------------------------------------------------------*/ + if (wait_for_dlllock() != 0) { + printf("dlllock did not occur !!!\n"); + printf("denali_core_search_data_eye!!!\n"); + printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n", + wr_dqs_shift, dll_dqs_delay_X); + hang(); + } + ppcMsync(); + ppcMbar(); + + if (wait_for_dram_init_complete() != 0) { + printf("dram init complete did not occur !!!\n"); + printf("denali_core_search_data_eye!!!\n"); + printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n", + wr_dqs_shift, dll_dqs_delay_X); + hang(); + } + udelay(100); /* wait 100us to ensure init is really completed !!! */ + + /* write values */ + for (j=0; j<NUM_TRIES; j++) { + ram_pointer[j] = test[j]; + + /* clear any cache at ram location */ + __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); + } + + /* read values back */ + for (j=0; j<NUM_TRIES; j++) { + for (k=0; k<NUM_READS; k++) { + /* clear any cache at ram location */ + __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); + + if (ram_pointer[j] != test[j]) + break; + } + + /* read error */ + if (k != NUM_READS) + break; + } + + /* See if the dll_dqs_delay_X value passed.*/ + if (j < NUM_TRIES) { + /* Failed */ + passing_cases = 0; + /* break; */ + } else { + /* Passed */ + if (passing_cases == 0) + dll_dqs_delay_X_sw_val = dll_dqs_delay_X; + passing_cases++; + if (passing_cases >= max_passing_cases) { + max_passing_cases = passing_cases; + wr_dqs_shift_with_max_passing_cases = wr_dqs_shift; + dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val; + dll_dqs_delay_X_end_window = dll_dqs_delay_X; + } + } + + /* -----------------------------------------------------------+ + * De-assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + + } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */ + + } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */ + + /* -----------------------------------------------------------+ + * Largest passing window is now detected. + * ----------------------------------------------------------*/ + + /* Compute dll_dqs_delay_X value */ + dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2; + wr_dqs_shift = wr_dqs_shift_with_max_passing_cases; + + debug("DQS calibration - Window detected:\n"); + debug("max_passing_cases = %d\n", max_passing_cases); + debug("wr_dqs_shift = %d\n", wr_dqs_shift); + debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X); + debug("dll_dqs_delay_X window = %d - %d\n", + dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window); + + /* -----------------------------------------------------------+ + * De-assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + + /* -----------------------------------------------------------+ + * Set 'wr_dqs_shift' + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_09); + val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) + | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift); + mtdcr(ddrcfgd, val); + debug("DDR0_09=0x%08lx\n", val); + + /* -----------------------------------------------------------+ + * Set 'dqs_out_shift' = wr_dqs_shift + 32 + * ----------------------------------------------------------*/ + dqs_out_shift = wr_dqs_shift + 32; + mtdcr(ddrcfga, DDR0_22); + val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) + | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift); + mtdcr(ddrcfgd, val); + debug("DDR0_22=0x%08lx\n", val); + + /* -----------------------------------------------------------+ + * Set 'dll_dqs_delay_X'. + * ----------------------------------------------------------*/ + /* dll_dqs_delay_0 */ + mtdcr(ddrcfga, DDR0_17); + val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK) + | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_17=0x%08lx\n", val); + + /* dll_dqs_delay_1 to dll_dqs_delay_4 */ + mtdcr(ddrcfga, DDR0_18); + val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK) + | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_18=0x%08lx\n", val); + + /* dll_dqs_delay_5 to dll_dqs_delay_8 */ + mtdcr(ddrcfga, DDR0_19); + val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK) + | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_19=0x%08lx\n", val); + + /* -----------------------------------------------------------+ + * Assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON; + mtdcr(ddrcfgd, val); + + ppcMsync(); + ppcMbar(); + + /* -----------------------------------------------------------+ + * Wait for the DCC master delay line to finish calibration + * ----------------------------------------------------------*/ + if (wait_for_dlllock() != 0) { + printf("dlllock did not occur !!!\n"); + hang(); + } + ppcMsync(); + ppcMbar(); + + if (wait_for_dram_init_complete() != 0) { + printf("dram init complete did not occur !!!\n"); + hang(); + } + udelay(100); /* wait 100us to ensure init is really completed !!! */ +} +#endif /* CONFIG_DDR_DATA_EYE */ + /************************************************************************* * * initdram -- 440EPx's DDR controller is a DENALI Core @@ -30,8 +379,6 @@ long int initdram (int board_type) { #if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) - volatile ulong val; - mtsdram(DDR0_02, 0x00000000); mtsdram(DDR0_00, 0x0000190A); @@ -64,14 +411,15 @@ long int initdram (int board_type) mtsdram(DDR0_44, 0x00000005); mtsdram(DDR0_02, 0x00000001); - /* - * Wait for DCC master delay line to finish calibration - */ - mfsdram(DDR0_17, val); - while (((val >> 8) & 0x000007f) == 0) { - mfsdram(DDR0_17, val); - } + wait_for_dlllock(); #endif /* #ifndef CONFIG_NAND_U_BOOT */ +#ifdef CONFIG_DDR_DATA_EYE + /* -----------------------------------------------------------+ + * Perform data eye search if requested. + * ----------------------------------------------------------*/ + denali_core_search_data_eye(CFG_MBYTES_SDRAM << 20); +#endif + return (CFG_MBYTES_SDRAM << 20); } diff --git a/board/amcc/sequoia/sdram.h b/board/amcc/sequoia/sdram.h new file mode 100644 index 0000000000..7f847aa2ad --- /dev/null +++ b/board/amcc/sequoia/sdram.h @@ -0,0 +1,505 @@ +/* + * (C) Copyright 2006 + * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SPD_SDRAM_DENALI_H_ +#define _SPD_SDRAM_DENALI_H_ + +#define ppcMsync sync +#define ppcMbar eieio + +/* General definitions */ +#define MAX_SPD_BYTE 128 /* highest SPD byte # to read */ +#define DENALI_REG_NUMBER 45 /* 45 Regs in PPC440EPx Denali Core */ +#define SUPPORTED_DIMMS_NB 7 /* Number of supported DIMM modules types */ +#define SDRAM_NONE 0 /* No DIMM detected in Slot */ +#define MAXRANKS 2 /* 2 ranks maximum */ + +/* Supported PLB Frequencies */ +#define PLB_FREQ_133MHZ 133333333 +#define PLB_FREQ_152MHZ 152000000 +#define PLB_FREQ_160MHZ 160000000 +#define PLB_FREQ_166MHZ 166666666 + +/* Denali Core Registers */ +#define SDRAM_DCR_BASE 0x10 + +#define DDR_DCR_BASE 0x10 +#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */ +#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */ + +/*-----------------------------------------------------------------------------+ + | Values for ddrcfga register - indirect addressing of these regs + +-----------------------------------------------------------------------------*/ + +#define DDR0_00 0x00 +#define DDR0_00_INT_ACK_MASK 0x7F000000 /* Write only */ +#define DDR0_00_INT_ACK_ALL 0x7F000000 +#define DDR0_00_INT_ACK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_00_INT_ACK_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +/* Status */ +#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */ +/* Bit0. A single access outside the defined PHYSICAL memory space detected. */ +#define DDR0_00_INT_STATUS_BIT0 0x00010000 +/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */ +#define DDR0_00_INT_STATUS_BIT1 0x00020000 +/* Bit2. Single correctable ECC event detected */ +#define DDR0_00_INT_STATUS_BIT2 0x00040000 +/* Bit3. Multiple correctable ECC events detected. */ +#define DDR0_00_INT_STATUS_BIT3 0x00080000 +/* Bit4. Single uncorrectable ECC event detected. */ +#define DDR0_00_INT_STATUS_BIT4 0x00100000 +/* Bit5. Multiple uncorrectable ECC events detected. */ +#define DDR0_00_INT_STATUS_BIT5 0x00200000 +/* Bit6. DRAM initialization complete. */ +#define DDR0_00_INT_STATUS_BIT6 0x00400000 +/* Bit7. Logical OR of all lower bits. */ +#define DDR0_00_INT_STATUS_BIT7 0x00800000 + +#define DDR0_00_INT_STATUS_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_00_INT_STATUS_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00 +#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_00_DLL_START_POINT_MASK 0x0000007F +#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_00_DLL_START_POINT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + + +#define DDR0_01 0x01 +#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000 +#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000 +#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16) +#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((unsigned long)(n))>>16)&0x1F) +#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */ +#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((unsigned long)(n))>>8)&0x7) +#define DDR0_01_INT_MASK_MASK 0x000000FF +#define DDR0_01_INT_MASK_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_01_INT_MASK_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) +#define DDR0_01_INT_MASK_ALL_ON 0x000000FF +#define DDR0_01_INT_MASK_ALL_OFF 0x00000000 + +#define DDR0_02 0x02 +#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */ +#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((unsigned long)(n))&0x2)<<24) +#define DDR0_02_MAX_CS_REG_DECODE(n) ((((unsigned long)(n))>>24)&0x2) +#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */ +#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<16) +#define DDR0_02_MAX_COL_REG_DECODE(n) ((((unsigned long)(n))>>16)&0xF) +#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */ +#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_02_START_MASK 0x00000001 +#define DDR0_02_START_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_02_START_DECODE(n) ((((unsigned long)(n))>>0)&0x1) +#define DDR0_02_START_OFF 0x00000000 +#define DDR0_02_START_ON 0x00000001 + +#define DDR0_03 0x03 +#define DDR0_03_BSTLEN_MASK 0x07000000 +#define DDR0_03_BSTLEN_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_03_BSTLEN_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_03_CASLAT_MASK 0x00070000 +#define DDR0_03_CASLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_03_CASLAT_LIN_MASK 0x00000F00 +#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_03_CASLAT_LIN_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_03_INITAREF_MASK 0x0000000F +#define DDR0_03_INITAREF_ENCODE(n) ((((unsigned long)(n))&0xF)<<0) +#define DDR0_03_INITAREF_DECODE(n) ((((unsigned long)(n))>>0)&0xF) + +#define DDR0_04 0x04 +#define DDR0_04_TRC_MASK 0x1F000000 +#define DDR0_04_TRC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_04_TRC_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_04_TRRD_MASK 0x00070000 +#define DDR0_04_TRRD_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_04_TRRD_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_04_TRTP_MASK 0x00000700 +#define DDR0_04_TRTP_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_04_TRTP_DECODE(n) ((((unsigned long)(n))>>8)&0x7) + +#define DDR0_05 0x05 +#define DDR0_05_TMRD_MASK 0x1F000000 +#define DDR0_05_TMRD_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_05_TMRD_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_05_TEMRS_MASK 0x00070000 +#define DDR0_05_TEMRS_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_05_TEMRS_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_05_TRP_MASK 0x00000F00 +#define DDR0_05_TRP_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_05_TRP_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_05_TRAS_MIN_MASK 0x000000FF +#define DDR0_05_TRAS_MIN_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_05_TRAS_MIN_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) + +#define DDR0_06 0x06 +#define DDR0_06_WRITEINTERP_MASK 0x01000000 +#define DDR0_06_WRITEINTERP_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_06_WRITEINTERP_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_06_TWTR_MASK 0x00070000 +#define DDR0_06_TWTR_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_06_TWTR_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_06_TDLL_MASK 0x0000FF00 +#define DDR0_06_TDLL_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_06_TDLL_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) +#define DDR0_06_TRFC_MASK 0x0000007F +#define DDR0_06_TRFC_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_06_TRFC_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_07 0x07 +#define DDR0_07_NO_CMD_INIT_MASK 0x01000000 +#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_07_TFAW_MASK 0x001F0000 +#define DDR0_07_TFAW_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16) +#define DDR0_07_TFAW_DECODE(n) ((((unsigned long)(n))>>16)&0x1F) +#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100 +#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1) +#define DDR0_07_AREFRESH_MASK 0x00000001 +#define DDR0_07_AREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_07_AREFRESH_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_08 0x08 +#define DDR0_08_WRLAT_MASK 0x07000000 +#define DDR0_08_WRLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_08_WRLAT_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_08_TCPD_MASK 0x00FF0000 +#define DDR0_08_TCPD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_08_TCPD_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_08_DQS_N_EN_MASK 0x00000100 +#define DDR0_08_DQS_N_EN_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_08_DQS_N_EN_DECODE(n) ((((unsigned long)(n))>>8)&0x1) +#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001 +#define DDR0_08_DDRII_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_08_DDRII_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_09 0x09 +#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000 +#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_09_RTT_0_MASK 0x00030000 +#define DDR0_09_RTT_0_ENCODE(n) ((((unsigned long)(n))&0x3)<<16) +#define DDR0_09_RTT_0_DECODE(n) ((((unsigned long)(n))>>16)&0x3) +#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00 +#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F +#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_10 0x0A +#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */ +#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_10_CS_MAP_MASK 0x00000300 +#define DDR0_10_CS_MAP_NO_MEM 0x00000000 +#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100 +#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200 +#define DDR0_10_CS_MAP_ENCODE(n) ((((unsigned long)(n))&0x3)<<8) +#define DDR0_10_CS_MAP_DECODE(n) ((((unsigned long)(n))>>8)&0x3) +#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F +#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0) +#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F) + +#define DDR0_11 0x0B +#define DDR0_11_SREFRESH_MASK 0x01000000 +#define DDR0_11_SREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_11_SREFRESH_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_11_TXSNR_MASK 0x00FF0000 +#define DDR0_11_TXSNR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_11_TXSNR_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_11_TXSR_MASK 0x0000FF00 +#define DDR0_11_TXSR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_11_TXSR_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) + +#define DDR0_12 0x0C +#define DDR0_12_TCKE_MASK 0x0000007 +#define DDR0_12_TCKE_ENCODE(n) ((((unsigned long)(n))&0x7)<<0) +#define DDR0_12_TCKE_DECODE(n) ((((unsigned long)(n))>>0)&0x7) + +#define DDR0_13 0x0D + +#define DDR0_14 0x0E +#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000 +#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_14_REDUC_MASK 0x00010000 +#define DDR0_14_REDUC_64BITS 0x00000000 +#define DDR0_14_REDUC_32BITS 0x00010000 +#define DDR0_14_REDUC_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_14_REDUC_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100 +#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((unsigned long)(n))>>8)&0x1) + +#define DDR0_15 0x0F + +#define DDR0_16 0x10 + +#define DDR0_17 0x11 +#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000 +#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */ +#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000 +#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000 +#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_17_DLLLOCKREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */ +#define DDR0_17_DLL_LOCK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_17_DLL_LOCK_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) + +#define DDR0_18 0x12 +#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F +#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000 +#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000 +#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00 +#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F +#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_19 0x13 +#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F +#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000 +#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000 +#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00 +#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F +#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_20 0x14 +#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000 +#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000 +#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00 +#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F +#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_21 0x15 +#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000 +#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000 +#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00 +#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F +#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_22 0x16 +/* ECC */ +#define DDR0_22_CTRL_RAW_MASK 0x03000000 +#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not being used */ +#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC checking is on, but no attempts to correct*/ +#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* No ECC RAM storage available */ +#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC checking and correcting on */ +#define DDR0_22_CTRL_RAW_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_22_CTRL_RAW_DECODE(n) ((((unsigned long)(n))>>24)&0x3) + +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000 +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00 +#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F +#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + + +#define DDR0_23 0x17 +#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000 +#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>24)&0x3) +#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */ +#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_23_ECC_C_SYND_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */ +#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_23_ECC_U_SYND_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) +#define DDR0_23_FWC_MASK 0x00000001 /* Write only */ +#define DDR0_23_FWC_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_23_FWC_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_24 0x18 +#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000 +#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3) +#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000 +#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<16) +#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>16)&0x3) +#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300 +#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<8) +#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>8)&0x3) +#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003 +#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<0) +#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>0)&0x3) + +#define DDR0_25 0x19 +#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */ +#define DDR0_25_VERSION_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16) +#define DDR0_25_VERSION_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF) +#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */ +#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) +#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) + +#define DDR0_26 0x1A +#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000 +#define DDR0_26_TRAS_MAX_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16) +#define DDR0_26_TRAS_MAX_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF) +#define DDR0_26_TREF_MASK 0x00003FFF +#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) +#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) + +#define DDR0_27 0x1B +#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000 +#define DDR0_27_EMRS_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16) +#define DDR0_27_EMRS_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF) +#define DDR0_27_TINIT_MASK 0x0000FFFF +#define DDR0_27_TINIT_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0) +#define DDR0_27_TINIT_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF) + +#define DDR0_28 0x1C +#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000 +#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16) +#define DDR0_28_EMRS3_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF) +#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF +#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0) +#define DDR0_28_EMRS2_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF) + +#define DDR0_29 0x1D + +#define DDR0_30 0x1E + +#define DDR0_31 0x1F +#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF +#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0) +#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF) + +#define DDR0_32 0x20 +#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_33 0x21 +#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_34 0x22 +#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_35 0x23 +#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_36 0x24 +#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_36_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_37 0x25 +#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_37_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_38 0x26 +#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_39 0x27 +#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_40 0x28 +#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_40_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_41 0x29 +#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_41_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_42 0x2A +#define DDR0_42_ADDR_PINS_MASK 0x07000000 +#define DDR0_42_ADDR_PINS_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_42_ADDR_PINS_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F +#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((unsigned long)(n))&0xF)<<0) +#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((unsigned long)(n))>>0)&0xF) + +#define DDR0_43 0x2B +#define DDR0_43_TWR_MASK 0x07000000 +#define DDR0_43_TWR_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_43_TWR_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_43_APREBIT_MASK 0x000F0000 +#define DDR0_43_APREBIT_ENCODE(n) ((((unsigned long)(n))&0xF)<<16) +#define DDR0_43_APREBIT_DECODE(n) ((((unsigned long)(n))>>16)&0xF) +#define DDR0_43_COLUMN_SIZE_MASK 0x00000700 +#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((unsigned long)(n))>>8)&0x7) +#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001 +#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001 +#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000 +#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_44 0x2C +#define DDR0_44_TRCD_MASK 0x000000FF +#define DDR0_44_TRCD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_44_TRCD_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) + +#endif /* _SPD_SDRAM_DENALI_H_ */ diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index ff211aef2d..b2b82c7595 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -35,9 +35,9 @@ ulong flash_get_size (ulong base, int banknum); int board_early_init_f(void) { - unsigned long sdr0_cust0; - unsigned long sdr0_pfc1, sdr0_pfc2; - register uint reg; + u32 sdr0_cust0; + u32 sdr0_pfc1, sdr0_pfc2; + u32 reg; mtdcr(ebccfga, xbcfg); mtdcr(ebccfgd, 0xb8400000); @@ -142,6 +142,7 @@ int misc_init_r(void) { uint pbcr; int size_val = 0; + u32 reg; #ifdef CONFIG_440EPX unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; @@ -335,18 +336,33 @@ int misc_init_r(void) } #endif /* CONFIG_440EPX */ + /* + * Clear PLB4A0_ACR[WRP] + * This fix will make the MAL burst disabling patch for the Linux + * EMAC driver obsolete. + */ + reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP; + mtdcr(plb4_acr, reg); + return 0; } int checkboard(void) { char *s = getenv("serial#"); + u8 rev; + u8 val; #ifdef CONFIG_440EPX printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board"); #else printf("Board: Rainier - AMCC PPC440GRx Evaluation Board"); #endif + + rev = *(u8 *)(CFG_CPLD + 0); + val = *(u8 *)(CFG_CPLD + 5) & 0x01; + printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33); + if (s != NULL) { puts(", serial# "); puts(s); diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c index 754ae449c1..04f58e0419 100644 --- a/board/amcc/yellowstone/yellowstone.c +++ b/board/amcc/yellowstone/yellowstone.c @@ -39,24 +39,6 @@ int board_early_init_f(void) reg = mfdcr(ebccfgd); mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */ - mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */ - mtebc(pb0cr, 0xfc0da000); /* BAS=0xfc0 64MB r/w 16-bit */ - - mtebc(pb1ap, 0x00000000); - mtebc(pb1cr, 0x00000000); - - mtebc(pb2ap, 0x04814500); - /*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */ - - mtebc(pb3ap, 0x00000000); - mtebc(pb3cr, 0x00000000); - - mtebc(pb4ap, 0x00000000); - mtebc(pb4cr, 0x00000000); - - mtebc(pb5ap, 0x00000000); - mtebc(pb5cr, 0x00000000); - /*-------------------------------------------------------------------- * Setup the GPIO pins *-------------------------------------------------------------------*/ @@ -190,8 +172,15 @@ int misc_init_r (void) int checkboard(void) { char *s = getenv("serial#"); + u8 rev; + u8 val; printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board"); + + rev = *(u8 *)(CFG_CPLD + 0); + val = *(u8 *)(CFG_CPLD + 5) & 0x01; + printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33); + if (s != NULL) { puts(", serial# "); puts(s); diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 588ee900da..d47219cb6f 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -39,24 +39,6 @@ int board_early_init_f(void) reg = mfdcr(ebccfgd); mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */ - mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */ - mtebc(pb0cr, 0xfc0da000); /* BAS=0xfc0 64MB r/w 16-bit */ - - mtebc(pb1ap, 0x00000000); - mtebc(pb1cr, 0x00000000); - - mtebc(pb2ap, 0x04814500); - /*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */ - - mtebc(pb3ap, 0x00000000); - mtebc(pb3cr, 0x00000000); - - mtebc(pb4ap, 0x00000000); - mtebc(pb4cr, 0x00000000); - - mtebc(pb5ap, 0x00000000); - mtebc(pb5cr, 0x00000000); - /*-------------------------------------------------------------------- * Setup the GPIO pins *-------------------------------------------------------------------*/ @@ -186,8 +168,15 @@ int misc_init_r (void) int checkboard(void) { char *s = getenv("serial#"); + u8 rev; + u8 val; printf("Board: Yosemite - AMCC PPC440EP Evaluation Board"); + + rev = *(u8 *)(CFG_CPLD + 0); + val = *(u8 *)(CFG_CPLD + 5) & 0x01; + printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33); + if (s != NULL) { puts(", serial# "); puts(s); diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c index 63e4139fc2..f1bb721284 100644 --- a/board/mcc200/auto_update.c +++ b/board/mcc200/auto_update.c @@ -121,10 +121,10 @@ struct flash_layout aufl_layout[AU_MAXFILES] = { \ #define I2C_PSOC_KEYPAD_ADDR 0x53 /* keypad mask */ -#define KEYPAD_ROW 3 -#define KEYPAD_COL 3 -#define KEYPAD_MASK_LO ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*4-4)))&0xFF) -#define KEYPAD_MASK_HI ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*4-4)))>>8) +#define KEYPAD_ROW 2 +#define KEYPAD_COL 2 +#define KEYPAD_MASK_LO ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*3-3)))&0xFF) +#define KEYPAD_MASK_HI ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*3-3)))>>8) /* externals */ extern int fat_register_device(block_dev_desc_t *, int); diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c index 67969a6010..af047e2a07 100644 --- a/board/mcc200/mcc200.c +++ b/board/mcc200/mcc200.c @@ -92,8 +92,8 @@ static void sdram_start (int hi_addr) /* * ATTENTION: Although partially referenced initdram does NOT make real use - * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE - * is something else than 0x00000000. + * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE + * is something else than 0x00000000. */ long int initdram (int board_type) @@ -228,10 +228,6 @@ int misc_init_r (void) { ulong flash_sup_end, snum; -#ifdef CONFIG_AUTO_UPDATE - /* this has priority over all else */ - do_auto_update(); -#endif /* * Adjust flash start and offset to detected values */ @@ -294,6 +290,9 @@ int misc_init_r (void) flash_info[0].sector_count = snum; } +#ifdef CONFIG_AUTO_UPDATE + do_auto_update(); +#endif return (0); } diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index 2389561271..5abc87dde6 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -77,8 +77,12 @@ int board_early_init_f (void) mtdcr (uicb0tr, 0x00000000); /* */ mtdcr (uicb0vr, 0x00000001); /* */ + /* Setup shutdown/SSD empty interrupt as inputs */ + out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY)); + out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY)); + /* Setup GPIO/IRQ multiplexing */ - mtsdr(sdr_pfc0, 0x01a03e00); + mtsdr(sdr_pfc0, 0x01a33e00); return 0; } @@ -105,26 +109,11 @@ int last_stage_init(void) static int board_rev(void) { - int rev; - u32 pfc0; - - /* Setup GPIO14 & 15 as GPIO */ - mfsdr(sdr_pfc0, pfc0); - pfc0 |= CFG_GPIO_REV0 | CFG_GPIO_REV1; - mtsdr(sdr_pfc0, pfc0); - /* Setup as input */ - out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0)); - out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0)); - - rev = (in32(GPIO0_IR) >> 16) & 0x3; - - /* Setup GPIO14 & 15 as non GPIO again */ - mfsdr(sdr_pfc0, pfc0); - pfc0 &= ~(CFG_GPIO_REV0 | CFG_GPIO_REV1); - mtsdr(sdr_pfc0, pfc0); + out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1)); + out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1)); - return rev; + return (in32(GPIO0_IR) >> 16) & 0x3; } int checkboard (void) diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c index e63c921eff..d66b08847a 100644 --- a/board/prodrive/alpr/nand.c +++ b/board/prodrive/alpr/nand.c @@ -154,7 +154,7 @@ static int alpr_nand_dev_ready(struct mtd_info *mtd) return 1; } -void board_nand_init(struct nand_chip *nand) +int board_nand_init(struct nand_chip *nand) { alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE; @@ -169,5 +169,7 @@ void board_nand_init(struct nand_chip *nand) nand->read_buf = alpr_nand_read_buf; nand->verify_buf = alpr_nand_verify_buf; nand->dev_ready = alpr_nand_dev_ready; + + return 0; } #endif diff --git a/board/solidcard3/init.S b/board/solidcard3/init.S index 36039e8f8d..e7b3c83949 100644 --- a/board/solidcard3/init.S +++ b/board/solidcard3/init.S @@ -1,26 +1,26 @@ /*------------------------------------------------------------------------------+ * - * This souce code has been made available to you by EuroDesign - * (www.eurodsn.de). It's based on the original IBM source code, so - * this follows: + * This souce code has been made available to you by EuroDesign + * (www.eurodsn.de). It's based on the original IBM source code, so + * this follows: * - * This source code has been made available to you by IBM on an AS-IS - * basis. Anyone receiving this source is licensed under IBM - * copyrights to use it in any way he or she deems fit, including - * copying it, modifying it, compiling it, and redistributing it either - * with or without modifications. No license under IBM patents or - * patent applications is to be implied by the copyright license. + * This source code has been made available to you by IBM on an AS-IS + * basis. Anyone receiving this source is licensed under IBM + * copyrights to use it in any way he or she deems fit, including + * copying it, modifying it, compiling it, and redistributing it either + * with or without modifications. No license under IBM patents or + * patent applications is to be implied by the copyright license. * - * Any user of this software should understand that IBM cannot provide - * technical support for this software and will not be responsible for - * any consequences resulting from the use of this software. + * Any user of this software should understand that IBM cannot provide + * technical support for this software and will not be responsible for + * any consequences resulting from the use of this software. * - * Any person who transfers this source code or any derivative work - * must include the IBM copyright notice, this paragraph, and the - * preceding two paragraphs in the transferred software. + * Any person who transfers this source code or any derivative work + * must include the IBM copyright notice, this paragraph, and the + * preceding two paragraphs in the transferred software. * - * COPYRIGHT I B M CORPORATION 1995 - * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M + * COPYRIGHT I B M CORPORATION 1995 + * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M *------------------------------------------------------------------------------- */ #include <config.h> @@ -56,12 +56,12 @@ ext_bus_cntlr_init: * timings into internal flash and external flash */ mfdcr r24,strap /* xxxx xxxx xxxx xxx? ?xxx xxxx xxxx xxxx - 0 0 -> 8 bit external ROM - 0 1 -> 16 bit internal ROM */ + 0 0 -> 8 bit external ROM + 0 1 -> 16 bit internal ROM */ addi r4,0,2 srw r24,r24,r4 /* shift right r24 two positions */ andi. r24,r24,0x06000 -/* +/* * All calculations are based on 33MHz EBC clock. * * First, create a "very slow" timing (~250ns) with burst mode enabled @@ -130,7 +130,7 @@ ext_bus_cntlr_init: mtdcr ebccfgd,r4 /*----------------------------------------------------------------------- - * Memory Bank 3 (Second-Flash) initialization + * Memory Bank 3 (Second-Flash) initialization * 0xF0000000...0xF01FFFFF -> 2MB *----------------------------------------------------------------------- */ @@ -149,7 +149,7 @@ ext_bus_cntlr_init: xori r24,r24,0x2000 /* invert current bus width */ or r4,r4,r24 mtdcr ebccfgd,r4 - + /*----------------------------------------------------------------------- * Memory Bank 1 (NAND-Flash) initialization * 0x77D00000...0x77DFFFFF -> 1MB @@ -186,7 +186,7 @@ ext_bus_cntlr_init: li r4,pb4ap /* PB4AP=Peripheral Bank 4 Access Parameters */ mtdcr ebccfga,r4 lis r4,0x0180 - ori r4,r4,0x5940 + ori r4,r4,0x5940 mtdcr ebccfgd,r4 #endif @@ -199,7 +199,7 @@ ext_bus_cntlr_init: A7 (ppc notation) or A24 (standard notation) decides about the type of access: A7/A24=0 -> memory cycle - A7//A24=1 -> I/O cycle + A7/ /A24=1 -> I/O cycle */ li r4,pb2ap /* PB2AP=Peripheral Bank 2 Access Parameters */ mtdcr ebccfga,r4 @@ -253,7 +253,7 @@ ext_bus_cntlr_init: li r25,pb6cr /* PB6CR=Peripheral Bank 6 Configuration Register */ mtdcr ebccfga,r25 lis r4,0x7401 - ori r4,r4,0xA000 + ori r4,r4,0xA000 mtdcr ebccfgd,r4 li r25,pb7cr /* PB7CR=Peripheral Bank 7 Configuration Register */ @@ -295,8 +295,8 @@ ext_bus_cntlr_init: * * Note: All calculations are based on 33MHz EBC clock. One '#' or '_' is 30ns * - * |- 300ns --| - * |---- 420ns ---|---- 420ns ---| cycle + * |- 300ns --| + * |---- 420ns ---|---- 420ns ---| cycle * CS ############:###____#######:###____####### * OE ############:####___#######:####___####### * WE ############:####__########:####__######## @@ -380,4 +380,3 @@ ext_bus_cntlr_init: stb r3,0(r4) /* 01 -> external bus controller is initialized */ nop /* pass2 DCR errata #8 */ blr - diff --git a/board/solidcard3/sc3nand.c b/board/solidcard3/sc3nand.c new file mode 100644 index 0000000000..7daa877cdd --- /dev/null +++ b/board/solidcard3/sc3nand.c @@ -0,0 +1,94 @@ +/* + * (C) Copyright 2007 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + +#include <nand.h> +#include <asm/processor.h> + +#define readb(addr) *(volatile u_char *)(addr) +#define readl(addr) *(volatile u_long *)(addr) +#define writeb(d,addr) *(volatile u_char *)(addr) = (d) + +#define SC3_NAND_ALE 29 /* GPIO PIN 3 */ +#define SC3_NAND_CLE 30 /* GPIO PIN 2 */ +#define SC3_NAND_CE 27 /* GPIO PIN 5 */ + +static void *sc3_io_base; +static void *sc3_control_base = (void *)0xEF600700; + +static void sc3_nand_hwcontrol(struct mtd_info *mtd, int cmd) +{ + switch (cmd) { + case NAND_CTL_SETCLE: + set_bit (SC3_NAND_CLE, sc3_control_base); + break; + case NAND_CTL_CLRCLE: + clear_bit (SC3_NAND_CLE, sc3_control_base); + break; + + case NAND_CTL_SETALE: + set_bit (SC3_NAND_ALE, sc3_control_base); + break; + case NAND_CTL_CLRALE: + clear_bit (SC3_NAND_ALE, sc3_control_base); + break; + + case NAND_CTL_SETNCE: + set_bit (SC3_NAND_CE, sc3_control_base); + break; + case NAND_CTL_CLRNCE: + clear_bit (SC3_NAND_CE, sc3_control_base); + break; + } +} + +static int sc3_nand_dev_ready(struct mtd_info *mtd) +{ + if (!(readl(sc3_control_base + 0x1C) & 0x4000)) + return 0; + return 1; +} + +static void sc3_select_chip(struct mtd_info *mtd, int chip) +{ + clear_bit (SC3_NAND_CE, sc3_control_base); +} + +int board_nand_init(struct nand_chip *nand) +{ + nand->eccmode = NAND_ECC_SOFT; + + sc3_io_base = (void *) CFG_NAND_BASE; + /* Set address of NAND IO lines (Using Linear Data Access Region) */ + nand->IO_ADDR_R = (void __iomem *) sc3_io_base; + nand->IO_ADDR_W = (void __iomem *) sc3_io_base; + /* Reference hardware control function */ + nand->hwcontrol = sc3_nand_hwcontrol; + nand->dev_ready = sc3_nand_dev_ready; + nand->select_chip = sc3_select_chip; + return 0; +} +#endif diff --git a/board/solidcard3/solidcard3.c b/board/solidcard3/solidcard3.c index 804471178d..21cc031ef9 100644 --- a/board/solidcard3/solidcard3.c +++ b/board/solidcard3/solidcard3.c @@ -1,4 +1,4 @@ -/* +/* * (C) Copyright 2007 * Heiko Schocher, DENX Software Engineering, <hs@denx.de>. * @@ -454,7 +454,7 @@ static void printCSConfig(int reg,unsigned long ap,unsigned long cr) printf("\n -Address setup %luns", ((ap & 0xC0000) >> 18) * CYCLE); printf("\n -CS active to RD %luns/WR %luns", - ((ap & 0x30000) >> 16) * CYCLE, + ((ap & 0x30000) >> 16) * CYCLE, ((ap & 0xC000) >> 14) * CYCLE); printf("\n -WR to CS inactive %luns", ((ap & 0x3000) >> 12) * CYCLE); @@ -496,7 +496,7 @@ int checkboard (void) for (i = 0; i < 8; i++) { show_reg (i); } - + mtdcr (ebccfga, epcr); ul1 = mfdcr (ebccfgd); @@ -707,7 +707,7 @@ static void pci_solidcard3_fixup_irq (struct pci_controller *hose, pci_dev_t dev switch (PCI_DEV(dev)) { case 10: - int_line = 31; /* INT A */ + int_line = 31; /* INT A */ POST_OUT(0x42); break; diff --git a/board/spc1920/Makefile b/board/spc1920/Makefile index 424ab1cf9e..0c48c3aeec 100644 --- a/board/spc1920/Makefile +++ b/board/spc1920/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o +COBJS = $(BOARD).o hpi.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/spc1920/hpi.c b/board/spc1920/hpi.c new file mode 100644 index 0000000000..3c36f7911b --- /dev/null +++ b/board/spc1920/hpi.c @@ -0,0 +1,603 @@ +/* + * (C) Copyright 2006 + * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Host Port Interface (HPI) + */ + +/* debug levels: + * 0 : errors + * 1 : usefull info + * 2 : lots of info + * 3 : noisy + */ + +#define DEBUG 0 + +#include <config.h> +#include <common.h> +#include <mpc8xx.h> + +#include "pld.h" +#include "hpi.h" + +#define _NOT_USED_ 0xFFFFFFFF + +/* original table: + * - inserted loops to achieve long CS low and high Periods (~217ns) + * - move cs high 2/4 to the right + */ +const uint dsp_table_slow[] = +{ + /* single read (offset 0x00 in upm ram) */ + 0x8fffdc04, 0x0fffdc84, 0x0fffdc84, 0x0fffdc00, + 0x3fffdc04, 0xffffdc84, 0xffffdc84, 0xffffdc05, + + /* burst read (offset 0x08 in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* single write (offset 0x18 in upm ram) */ + 0x8fffd004, 0x0fffd084, 0x0fffd084, 0x3fffd000, + 0xffffd084, 0xffffd084, 0xffffd005, _NOT_USED_, + + /* burst write (offset 0x20 in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* refresh (offset 0x30 in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* exception (offset 0x3C in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, +}; + +/* dsp hpi upm ram table + * works fine for noninc access, failes on incremental. + * - removed first word + */ +const uint dsp_table_fast[] = +{ + /* single read (offset 0x00 in upm ram) */ + 0x8fffdc04, 0x0fffdc04, 0x0fffdc00, 0x3fffdc04, + 0xffffdc05, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* burst read (offset 0x08 in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* single write (offset 0x18 in upm ram) */ + 0x8fffd004, 0x0fffd004, 0x3fffd000, 0xffffd005, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* burst write (offset 0x20 in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* refresh (offset 0x30 in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* exception (offset 0x3C in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, +}; + + +#ifdef CONFIG_SPC1920_HPI_TEST +#undef HPI_TEST_OSZI + +#define HPI_TEST_CHUNKSIZE 0x1000 +#define HPI_TEST_PATTERN 0x00000000 +#define HPI_TEST_START 0x0 +#define HPI_TEST_END 0x30000 + +#define TINY_AUTOINC_DATA_SIZE 16 /* 32bit words */ +#define TINY_AUTOINC_BASE_ADDR 0x0 + +static int hpi_activate(void); +static void hpi_inactivate(void); +static void dsp_reset(void); + +static int hpi_write_inc(u32 addr, u32 *data, u32 count); +static int hpi_read_inc(u32 addr, u32 *buf, u32 count); +static int hpi_write_noinc(u32 addr, u32 data); +static u32 hpi_read_noinc(u32 addr); + +int hpi_test(void); +static int hpi_write_addr_test(u32 addr); +static int hpi_read_write_test(u32 addr, u32 data); +static int hpi_tiny_autoinc_test(void); +#endif /* CONFIG_SPC1920_HPI_TEST */ + + +/* init the host port interface on UPMA */ +int hpi_init(void) +{ + volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immr->im_memctl; + volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE; + + upmconfig(UPMA, (uint *)dsp_table_slow, sizeof(dsp_table_slow)/sizeof(uint)); + udelay(100); + + memctl->memc_mamr = CFG_MAMR; + memctl->memc_or3 = CFG_OR3; + memctl->memc_br3 = CFG_BR3; + + /* reset dsp */ + dsp_reset(); + + /* activate hpi switch*/ + pld->dsp_hpi_on = 0x1; + + udelay(100); + + return 0; +} + +#ifdef CONFIG_SPC1920_HPI_TEST +/* activate the Host Port interface */ +static int hpi_activate(void) +{ + volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE; + + /* turn on hpi */ + pld->dsp_hpi_on = 0x1; + + udelay(5); + + /* turn on the power EN_DSP_POWER high*/ + /* currently always on TBD */ + + /* setup hpi control register */ + HPI_HPIC_1 = (u16) 0x0008; + HPI_HPIC_2 = (u16) 0x0008; + + udelay(100); + + return 0; +} + +/* turn off the host port interface */ +static void hpi_inactivate(void) +{ + volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE; + + /* deactivate hpi */ + pld->dsp_hpi_on = 0x0; + + /* reset the dsp */ + /* pld->dsp_reset = 0x0; */ + + /* turn off the power EN_DSP_POWER# high*/ + /* currently always on TBD */ + +} + +/* reset the DSP */ +static void dsp_reset(void) +{ + volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE; + pld->dsp_reset = 0x1; + pld->dsp_hpi_on = 0x0; + + udelay(300000); + + pld->dsp_reset = 0x0; + pld->dsp_hpi_on = 0x1; +} + + +/* write using autoinc (count is number of 32bit words) */ +static int hpi_write_inc(u32 addr, u32 *data, u32 count) +{ + int i; + u16 addr1, addr2; + + addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */ + addr2 = (u16) (addr & 0xffff); + + /* write address */ + HPI_HPIA_1 = addr1; + HPI_HPIA_2 = addr2; + + debugX(4, "writing from data=0x%x to 0x%x\n", data, (data+count)); + + for(i=0; i<count; i++) { + HPI_HPID_INC_1 = (u16) ((data[i] >> 16) & 0xffff); + HPI_HPID_INC_2 = (u16) (data[i] & 0xffff); + debugX(4, "hpi_write_inc: data1=0x%x, data2=0x%x\n", + (u16) ((data[i] >> 16) & 0xffff), + (u16) (data[i] & 0xffff)); + } +#if 0 + while(data_ptr < (u16*) (data + count)) { + HPI_HPID_INC_1 = *(data_ptr++); + HPI_HPID_INC_2 = *(data_ptr++); + } +#endif + + /* return number of bytes written */ + return count; +} + +/* + * read using autoinc (count is number of 32bit words) + */ +static int hpi_read_inc(u32 addr, u32 *buf, u32 count) +{ + int i; + u16 addr1, addr2, data1, data2; + + addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */ + addr2 = (u16) (addr & 0xffff); + + /* write address */ + HPI_HPIA_1 = addr1; + HPI_HPIA_2 = addr2; + + for(i=0; i<count; i++) { + data1 = HPI_HPID_INC_1; + data2 = HPI_HPID_INC_2; + debugX(4, "hpi_read_inc: data1=0x%x, data2=0x%x\n", data1, data2); + buf[i] = (((u32) data1) << 16) | (data2 & 0xffff); + } + +#if 0 + while(buf_ptr < (u16*) (buf + count)) { + *(buf_ptr++) = HPI_HPID_INC_1; + *(buf_ptr++) = HPI_HPID_INC_2; + } +#endif + + /* return number of bytes read */ + return count; +} + + +/* write to non- auto inc regs */ +static int hpi_write_noinc(u32 addr, u32 data) +{ + + u16 addr1, addr2, data1, data2; + + addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */ + addr2 = (u16) (addr & 0xffff); + + /* printf("hpi_write_noinc: addr1=0x%x, addr2=0x%x\n", addr1, addr2); */ + + HPI_HPIA_1 = addr1; + HPI_HPIA_2 = addr2; + + data1 = (u16) ((data >> 16) & 0xffff); + data2 = (u16) (data & 0xffff); + + /* printf("hpi_write_noinc: data1=0x%x, data2=0x%x\n", data1, data2); */ + + HPI_HPID_NOINC_1 = data1; + HPI_HPID_NOINC_2 = data2; + + return 0; +} + +/* read from non- auto inc regs */ +static u32 hpi_read_noinc(u32 addr) +{ + u16 addr1, addr2, data1, data2; + u32 ret; + + addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */ + addr2 = (u16) (addr & 0xffff); + + HPI_HPIA_1 = addr1; + HPI_HPIA_2 = addr2; + + /* printf("hpi_read_noinc: addr1=0x%x, addr2=0x%x\n", addr1, addr2); */ + + data1 = HPI_HPID_NOINC_1; + data2 = HPI_HPID_NOINC_2; + + /* printf("hpi_read_noinc: data1=0x%x, data2=0x%x\n", data1, data2); */ + + ret = (((u32) data1) << 16) | (data2 & 0xffff); + return ret; + +} + +/* + * Host Port Interface Tests + */ + +#ifndef HPI_TEST_OSZI +/* main test function */ +int hpi_test(void) +{ + int err = 0; + u32 i, ii, pattern, tmp; + + pattern = HPI_TEST_PATTERN; + + u32 test_data[HPI_TEST_CHUNKSIZE]; + u32 read_data[HPI_TEST_CHUNKSIZE]; + + debugX(2, "hpi_test: activating hpi..."); + hpi_activate(); + debugX(2, "OK.\n"); + +#if 0 + /* Dump the first 1024 bytes + * + */ + for(i=0; i<1024; i+=4) { + if(i%16==0) + printf("\n0x%08x: ", i); + printf("0x%08x ", hpi_read_noinc(i)); + } +#endif + + /* HPIA read-write test + * + */ + debugX(1, "hpi_test: starting HPIA read-write tests...\n"); + err |= hpi_write_addr_test(0xdeadc0de); + err |= hpi_write_addr_test(0xbeefd00d); + err |= hpi_write_addr_test(0xabcd1234); + err |= hpi_write_addr_test(0xaaaaaaaa); + if(err) { + debugX(1, "hpi_test: HPIA read-write tests: *** FAILED ***\n"); + return -1; + } + debugX(1, "hpi_test: HPIA read-write tests: OK\n"); + + + /* read write test using nonincremental data regs + * + */ + debugX(1, "hpi_test: starting nonincremental tests...\n"); + for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) { + err |= hpi_read_write_test(i, pattern); + + /* stolen from cmd_mem.c */ + if(pattern & 0x80000000) { + pattern = -pattern; /* complement & increment */ + } else { + pattern = ~pattern; + } + err |= hpi_read_write_test(i, pattern); + + if(err) { + debugX(1, "hpi_test: nonincremental tests *** FAILED ***\n"); + return -1; + } + } + debugX(1, "hpi_test: nonincremental test OK\n"); + + /* read write a chunk of data using nonincremental data regs + * + */ + debugX(1, "hpi_test: starting nonincremental chunk tests...\n"); + pattern = HPI_TEST_PATTERN; + for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) { + hpi_write_noinc(i, pattern); + + /* stolen from cmd_mem.c */ + if(pattern & 0x80000000) { + pattern = -pattern; /* complement & increment */ + } else { + pattern = ~pattern; + } + } + pattern = HPI_TEST_PATTERN; + for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) { + tmp = hpi_read_noinc(i); + + if(tmp != pattern) { + debugX(1, "hpi_test: noninc chunk test *** FAILED *** @ 0x%x, written=0x%x, read=0x%x\n", i, pattern, tmp); + err = -1; + } + /* stolen from cmd_mem.c */ + if(pattern & 0x80000000) { + pattern = -pattern; /* complement & increment */ + } else { + pattern = ~pattern; + } + } + if(err) + return -1; + debugX(1, "hpi_test: nonincremental chunk test OK\n"); + + +#ifdef DO_TINY_TEST + /* small verbose test using autoinc and nonautoinc to compare + * + */ + debugX(1, "hpi_test: tiny_autoinc_test...\n"); + hpi_tiny_autoinc_test(); + debugX(1, "hpi_test: tiny_autoinc_test done\n"); +#endif /* DO_TINY_TEST */ + + + /* $%& write a chunk of data using the autoincremental regs + * + */ + debugX(1, "hpi_test: starting autoinc test %d chunks with 0x%x bytes...\n", + ((HPI_TEST_END - HPI_TEST_START) / HPI_TEST_CHUNKSIZE), + HPI_TEST_CHUNKSIZE); + + for(i=HPI_TEST_START; + i < ((HPI_TEST_END - HPI_TEST_START) / HPI_TEST_CHUNKSIZE); + i++) { + /* generate the pattern data */ + debugX(3, "generating pattern data: "); + for(ii = 0; ii < HPI_TEST_CHUNKSIZE; ii++) { + debugX(3, "0x%x ", pattern); + + test_data[ii] = pattern; + read_data[ii] = 0x0; /* zero to be sure */ + + /* stolen from cmd_mem.c */ + if(pattern & 0x80000000) { + pattern = -pattern; /* complement & increment */ + } else { + pattern = ~pattern; + } + } + debugX(3, "done\n"); + + debugX(2, "Writing autoinc data @ 0x%x\n", i); + hpi_write_inc(i, test_data, HPI_TEST_CHUNKSIZE); + + debugX(2, "Reading autoinc data @ 0x%x\n", i); + hpi_read_inc(i, read_data, HPI_TEST_CHUNKSIZE); + + /* compare */ + for(ii = 0; ii < HPI_TEST_CHUNKSIZE; ii++) { + debugX(3, "hpi_test_autoinc: @ 0x%x, written=0x%x, read=0x%x", i+ii, test_data[ii], read_data[ii]); + if(read_data[ii] != test_data[ii]) { + debugX(0, "hpi_test: autoinc test @ 0x%x, written=0x%x, read=0x%x *** FAILED ***\n", i+ii, test_data[ii], read_data[ii]); + return -1; + } + } + } + debugX(1, "hpi_test: autoinc test OK\n"); + + return 0; +} +#else /* HPI_TEST_OSZI */ +int hpi_test(void) +{ + int i; + u32 read_data[TINY_AUTOINC_DATA_SIZE]; + + unsigned int dummy_data[TINY_AUTOINC_DATA_SIZE] = { + 0x11112222, 0x33334444, 0x55556666, 0x77778888, + 0x9999aaaa, 0xbbbbcccc, 0xddddeeee, 0xffff1111, + 0x00010002, 0x00030004, 0x00050006, 0x00070008, + 0x0009000a, 0x000b000c, 0x000d000e, 0x000f0001 + }; + + debugX(0, "hpi_test: activating hpi..."); + hpi_activate(); + debugX(0, "OK.\n"); + + while(1) { + led9(1); + debugX(0, " writing to autoinc...\n"); + hpi_write_inc(TINY_AUTOINC_BASE_ADDR, + dummy_data, TINY_AUTOINC_DATA_SIZE); + + debugX(0, " reading from autoinc...\n"); + hpi_read_inc(TINY_AUTOINC_BASE_ADDR, + read_data, TINY_AUTOINC_DATA_SIZE); + + for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) { + debugX(0, " written=0x%x, read(inc)=0x%x\n", + dummy_data[i], read_data[i]); + } + led9(0); + udelay(2000000); + } + return 0; +} +#endif + +/* test if Host Port Address Register can be written correctly */ +static int hpi_write_addr_test(u32 addr) +{ + u32 read_back; + /* write address */ + HPI_HPIA_1 = ((u16) (addr >> 16)); /* First HW is most significant */ + HPI_HPIA_2 = ((u16) addr); + + read_back = (((u32) HPI_HPIA_1)<<16) | ((u32) HPI_HPIA_2); + + if(read_back == addr) { + debugX(2, " hpi_write_addr_test OK: written=0x%x, read=0x%x\n", + addr, read_back); + return 0; + } else { + debugX(0, " hpi_write_addr_test *** FAILED ***: written=0x%x, read=0x%x\n", + addr, read_back); + return -1; + } + + return 0; +} + +/* test if a simple read/write sequence succeeds */ +static int hpi_read_write_test(u32 addr, u32 data) +{ + u32 read_back; + + hpi_write_noinc(addr, data); + read_back = hpi_read_noinc(addr); + + if(read_back == data) { + debugX(2, " hpi_read_write_test: OK, addr=0x%x written=0x%x, read=0x%x\n", addr, data, read_back); + return 0; + } else { + debugX(0, " hpi_read_write_test: *** FAILED ***, addr=0x%x written=0x%x, read=0x%x\n", addr, data, read_back); + return -1; + } + + return 0; +} + +static int hpi_tiny_autoinc_test(void) +{ + int i; + u32 read_data[TINY_AUTOINC_DATA_SIZE]; + u32 read_data_noinc[TINY_AUTOINC_DATA_SIZE]; + + unsigned int dummy_data[TINY_AUTOINC_DATA_SIZE] = { + 0x11112222, 0x33334444, 0x55556666, 0x77778888, + 0x9999aaaa, 0xbbbbcccc, 0xddddeeee, 0xffff1111, + 0x00010002, 0x00030004, 0x00050006, 0x00070008, + 0x0009000a, 0x000b000c, 0x000d000e, 0x000f0001 + }; + + printf(" writing to autoinc...\n"); + hpi_write_inc(TINY_AUTOINC_BASE_ADDR, dummy_data, TINY_AUTOINC_DATA_SIZE); + + printf(" reading from autoinc...\n"); + hpi_read_inc(TINY_AUTOINC_BASE_ADDR, read_data, TINY_AUTOINC_DATA_SIZE); + + printf(" reading from noinc for comparison...\n"); + for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) + read_data_noinc[i] = hpi_read_noinc(TINY_AUTOINC_BASE_ADDR+i*4); + + for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) { + printf(" written=0x%x, read(inc)=0x%x, read(noinc)=0x%x\n", + dummy_data[i], read_data[i], read_data_noinc[i]); + } + return 0; +} + +#endif /* CONFIG_SPC1920_HPI_TEST */ diff --git a/board/spc1920/hpi.h b/board/spc1920/hpi.h new file mode 100644 index 0000000000..4503873084 --- /dev/null +++ b/board/spc1920/hpi.h @@ -0,0 +1,28 @@ +/* + * (C) Copyright 2006 + * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +int hpi_init(void); + +#ifdef CONFIG_SPC1920_HPI_TEST +int hpi_test(void); +#endif diff --git a/board/spc1920/pld.h b/board/spc1920/pld.h index 3254f820c1..5beb71b5cc 100644 --- a/board/spc1920/pld.h +++ b/board/spc1920/pld.h @@ -5,8 +5,8 @@ typedef struct spc1920_pld { uchar com1_en; uchar dsp_reset; uchar dsp_hpi_on; + uchar superv_mode; uchar codec_dsp_power_en; - uchar clk2_en; uchar clk3_select; uchar clk4_select; } spc1920_pld_t; diff --git a/board/spc1920/spc1920.c b/board/spc1920/spc1920.c index 028f4c635d..1f5dcb5d3e 100644 --- a/board/spc1920/spc1920.c +++ b/board/spc1920/spc1920.c @@ -27,9 +27,9 @@ #include <common.h> #include <mpc8xx.h> #include "pld.h" +#include "hpi.h" #define _NOT_USED_ 0xFFFFFFFF -/* #define debug(fmt,args...) printf (fmt ,##args) */ static long int dram_size (long int, long int *, long int); @@ -172,10 +172,12 @@ long int initdram (int board_type) memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V; udelay (1000); + /* initalize the DSP Host Port Interface */ + hpi_init(); - /* PLD Setup */ - memctl->memc_or5 = CFG_OR5_PRELIM; - memctl->memc_br5 = CFG_BR5_PRELIM; + /* FRAM Setup */ + memctl->memc_or4 = CFG_OR4; + memctl->memc_br4 = CFG_BR4; udelay(1000); return (size_b0); @@ -207,13 +209,31 @@ int board_early_init_f(void) { volatile immap_t *immap = (immap_t *) CFG_IMMR; + /* Set Go/NoGo led (PA15) to color red */ + immap->im_ioport.iop_papar &= ~0x1; + immap->im_ioport.iop_paodr &= ~0x1; + immap->im_ioport.iop_padir |= 0x1; + immap->im_ioport.iop_padat |= 0x1; +#if 0 /* Turn on LED PD9 */ immap->im_ioport.iop_pdpar &= ~(0x0040); immap->im_ioport.iop_pddir |= 0x0040; immap->im_ioport.iop_pddat |= 0x0040; +#endif + + /* + * Enable console on SMC1. This requires turning on + * the com2_en signal and SMC1_DISABLE + */ + + /* SMC1_DISABLE: PB17 */ + immap->im_cpm.cp_pbodr &= ~0x4000; + immap->im_cpm.cp_pbpar &= ~0x4000; + immap->im_cpm.cp_pbdir |= 0x4000; + immap->im_cpm.cp_pbdat &= ~0x4000; - /* Enable PD10 (COM2_EN) */ + /* COM2_EN: PD10 */ immap->im_ioport.iop_pdpar &= ~0x0020; immap->im_ioport.iop_pddir &= ~0x4000; immap->im_ioport.iop_pddir |= 0x0020; @@ -228,6 +248,14 @@ int board_early_init_f(void) return 0; } +int last_stage_init(void) +{ +#ifdef CONFIG_SPC1920_HPI_TEST + printf("CMB1920 Host Port Interface Test: %s\n", + hpi_test() ? "Failed!" : "OK"); +#endif + return 0; +} int checkboard (void) { diff --git a/board/tqm5200/cam5200_flash.c b/board/tqm5200/cam5200_flash.c index 8c3f62e398..b3f095d807 100644 --- a/board/tqm5200/cam5200_flash.c +++ b/board/tqm5200/cam5200_flash.c @@ -25,7 +25,7 @@ #include <mpc5xxx.h> #include <asm/processor.h> -#ifdef CONFIG_CAM5200 +#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) #if 0 #define DEBUGF(x...) printf(x) @@ -783,4 +783,4 @@ unsigned long flash_init(void) return total_b; } -#endif /* ifdef CONFIG_CAM5200 */ +#endif /* if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) */ diff --git a/board/uc101/Makefile b/board/uc101/Makefile new file mode 100644 index 0000000000..ddfd2ef8af --- /dev/null +++ b/board/uc101/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2003-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/uc101/config.mk b/board/uc101/config.mk new file mode 100644 index 0000000000..51e8e84c5c --- /dev/null +++ b/board/uc101/config.mk @@ -0,0 +1,41 @@ +# +# (C) Copyright 2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# INKA 4X0 board: +# +# Valid values for TEXT_BASE are: +# +# 0xFFE00000 boot high +# +# 0x00100000 boot from RAM (for testing only) +# + +ifndef TEXT_BASE +## Standard: boot high +TEXT_BASE = 0xFFF00000 +## For testing: boot from RAM +#TEXT_BASE = 0x00100000 +endif + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/uc101/u-boot.lds b/board/uc101/u-boot.lds new file mode 100644 index 0000000000..123a14c5aa --- /dev/null +++ b/board/uc101/u-boot.lds @@ -0,0 +1,136 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mpc5xxx/start.o (.text) + cpu/mpc5xxx/traps.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/cache.o (.text) + lib_ppc/time.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.ppcenv) + + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/uc101/uc101.c b/board/uc101/uc101.c new file mode 100644 index 0000000000..b803585845 --- /dev/null +++ b/board/uc101/uc101.c @@ -0,0 +1,371 @@ +/* + * (C) Copyright 2006 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2004 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc5xxx.h> +#include <pci.h> +#include <malloc.h> + +/* some SIMPLE GPIO Pins */ +#define GPIO_USB_8 (31-12) +#define GPIO_USB_7 (31-13) +#define GPIO_USB_6 (31-14) +#define GPIO_USB_0 (31-15) +#define GPIO_PSC3_7 (31-18) +#define GPIO_PSC3_6 (31-19) +#define GPIO_PSC3_1 (31-22) +#define GPIO_PSC3_0 (31-23) + +/* some simple Interrupt GPIO Pins */ +#define GPIO_PSC3_8 2 +#define GPIO_USB1_9 3 + +#define GPT_OUT_0 0x00000027 +#define GPT_OUT_1 0x00000037 +#define GPT_DISABLE 0x00000000 /* GPT pin disabled */ + +#define GP_SIMP_ENABLE_O(n, v) {pgpio->simple_dvo |= (v << n); \ + pgpio->simple_ddr |= (1 << n); \ + pgpio->simple_gpioe |= (1 << n); \ + } + +#define GP_SIMP_ENABLE_I(n) { pgpio->simple_ddr |= ~(1 << n); \ + pgpio->simple_gpioe |= (1 << n); \ + } + +#define GP_SIMP_SET_O(n, v) (pgpio->simple_dvo = v ? \ + (pgpio->simple_dvo | (1 << n)) : \ + (pgpio->simple_dvo & ~(1 << n)) ) + +#define GP_SIMP_GET_O(n) ((pgpio->simple_dvo >> n) & 1) +#define GP_SIMP_GET_I(n) ((pgpio->simple_ival >> n) & 1) + +#define GP_SINT_SET_O(n, v) (pgpio->sint_dvo = v ? \ + (pgpio->sint_dvo | (1 << n)) : \ + (pgpio->sint_dvo & ~(1 << n)) ) + +#define GP_SINT_ENABLE_O(n, v) {pgpio->sint_ode &= ~(1 << n); \ + pgpio->sint_ddr |= (1 << n); \ + GP_SINT_SET_O(n, v); \ + pgpio->sint_gpioe |= (1 << n); \ + } + +#define GP_SINT_ENABLE_I(n) { pgpio->sint_ddr |= ~(1 << n); \ + pgpio->sint_gpioe |= (1 << n); \ + } + +#define GP_SINT_GET_O(n) ((pgpio->sint_ival >> n) & 1) +#define GP_SINT_GET_I(n) ((pgpio-ntt_ival >> n) & 1) + +#define GP_TIMER_ENABLE_O(n, v) ( \ + ((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->emsr = v ? \ + GPT_OUT_1 : \ + GPT_OUT_0 ) + +#define GP_TIMER_SET_O(n, v) GP_TIMER_ENABLE_O(n, v) + +#define GP_TIMER_GET_O(n, v) ( \ + (((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->emsr & 0x10) >> 4) + +#define GP_TIMER_GET_I(n, v) ( \ + (((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->sr & 0x100) >> 8) + +#ifndef CFG_RAMBOOT +static void sdram_start (int hi_addr) +{ + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; + __asm__ volatile ("sync"); + +#if SDRAM_DDR + /* set mode register: extended mode */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; + __asm__ volatile ("sync"); + + /* set mode register: reset DLL */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; + __asm__ volatile ("sync"); +#endif + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* auto refresh */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* set mode register */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; + __asm__ volatile ("sync"); + + /* normal operation */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; + __asm__ volatile ("sync"); +} +#endif + +/* + * ATTENTION: Although partially referenced initdram does NOT make real use + * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE + * is something else than 0x00000000. + */ + +long int initdram (int board_type) +{ + ulong dramsize = 0; +#ifndef CFG_RAMBOOT + ulong test1, test2; + + /* setup SDRAM chip selects */ + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */ + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */ + __asm__ volatile ("sync"); + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + __asm__ volatile ("sync"); + +#if SDRAM_DDR + /* set tap delay */ + *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; + __asm__ volatile ("sync"); +#endif + + /* find RAM size using SDRAM CS0 only */ + sdram_start(0); + test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000); + sdram_start(1); + test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) { + dramsize = 0; + } + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + + __builtin_ffs(dramsize >> 20) - 1; + } else { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ + } + + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ +#else /* CFG_RAMBOOT */ + + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; + if (dramsize >= 0x13) { + dramsize = (1 << (dramsize - 0x13)) << 20; + } else { + dramsize = 0; + } + + /* retrieve size of memory connected to SDRAM CS1 */ + dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; + if (dramsize2 >= 0x13) { + dramsize2 = (1 << (dramsize2 - 0x13)) << 20; + } else { + dramsize2 = 0; + } + +#endif /* CFG_RAMBOOT */ + +/* return dramsize + dramsize2; */ + return dramsize; +} + +int checkboard (void) +{ + puts ("Board: MAN UC101\n"); + return 0; +} + +static void init_ports (void) +{ + volatile struct mpc5xxx_gpio *pgpio = + (struct mpc5xxx_gpio *)MPC5XXX_GPIO; + + GP_SIMP_ENABLE_I(GPIO_USB_8); /* HEX Bit 3 */ + GP_SIMP_ENABLE_I(GPIO_USB_7); /* HEX Bit 2 */ + GP_SIMP_ENABLE_I(GPIO_USB_6); /* HEX Bit 1 */ + GP_SIMP_ENABLE_I(GPIO_USB_0); /* HEX Bit 0 */ + GP_SIMP_ENABLE_I(GPIO_PSC3_0); /* Switch Menue A */ + GP_SIMP_ENABLE_I(GPIO_PSC3_1); /* Switch Menue B */ + GP_SIMP_ENABLE_I(GPIO_PSC3_6); /* Switch Cold_Warm */ + GP_SIMP_ENABLE_I(GPIO_PSC3_7); /* Switch Restart */ + GP_SINT_ENABLE_O(GPIO_PSC3_8, 0); /* LED H2 */ + GP_SINT_ENABLE_O(GPIO_USB1_9, 0); /* LED H3 */ + GP_TIMER_ENABLE_O(4, 0); /* LED H4 */ + GP_TIMER_ENABLE_O(5, 0); /* LED H5 */ + GP_TIMER_ENABLE_O(3, 0); /* LED HB */ + GP_TIMER_ENABLE_O(1, 0); /* RES_COLDSTART */ +} + +#ifdef CONFIG_PREBOOT + +static uchar kbd_magic_prefix[] = "key_magic"; +static uchar kbd_command_prefix[] = "key_cmd"; + +struct kbd_data_t { + char s1; +}; + +struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data) +{ + volatile struct mpc5xxx_gpio *pgpio = + (struct mpc5xxx_gpio *)MPC5XXX_GPIO; + + kbd_data->s1 = GP_SIMP_GET_I(GPIO_USB_8) << 3 | \ + GP_SIMP_GET_I(GPIO_USB_7) << 2 | \ + GP_SIMP_GET_I(GPIO_USB_6) << 1 | \ + GP_SIMP_GET_I(GPIO_USB_0) << 0; + return kbd_data; +} + +static int compare_magic (const struct kbd_data_t *kbd_data, uchar *str) +{ + char s1 = str[0]; + + if (s1 >= '0' && s1 <= '9') + s1 -= '0'; + else if (s1 >= 'a' && s1 <= 'f') + s1 = s1 - 'a' + 10; + else if (s1 >= 'A' && s1 <= 'F') + s1 = s1 - 'A' + 10; + else + return -1; + + if (s1 != kbd_data->s1) return -1; + return 0; +} + +static uchar *key_match (const struct kbd_data_t *kbd_data) +{ + uchar magic[sizeof (kbd_magic_prefix) + 1]; + uchar *suffix; + uchar *kbd_magic_keys; + + /* + * The following string defines the characters that can be appended + * to "key_magic" to form the names of environment variables that + * hold "magic" key codes, i. e. such key codes that can cause + * pre-boot actions. If the string is empty (""), then only + * "key_magic" is checked (old behaviour); the string "125" causes + * checks for "key_magic1", "key_magic2" and "key_magic5", etc. + */ + if ((kbd_magic_keys = getenv ("magic_keys")) == NULL) + kbd_magic_keys = ""; + + /* loop over all magic keys; + * use '\0' suffix in case of empty string + */ + for (suffix = kbd_magic_keys; *suffix || + suffix == kbd_magic_keys; ++suffix) { + sprintf (magic, "%s%c", kbd_magic_prefix, *suffix); + + if (compare_magic(kbd_data, getenv(magic)) == 0) { + uchar cmd_name[sizeof (kbd_command_prefix) + 1]; + char *cmd; + + sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix); + cmd = getenv (cmd_name); + + return (cmd); + } + } + + return (NULL); +} + +#endif /* CONFIG_PREBOOT */ + +int misc_init_r (void) +{ + /* Init the I/O ports */ + init_ports (); + +#ifdef CONFIG_PREBOOT + struct kbd_data_t kbd_data; + /* Decode keys */ + uchar *str = strdup (key_match (get_keys (&kbd_data))); + /* Set or delete definition */ + setenv ("preboot", str); + free (str); +#endif /* CONFIG_PREBOOT */ + return 0; +} + +int board_early_init_r (void) +{ + *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ + *(vu_long *)MPC5XXX_BOOTCS_START = + *(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_FLASH_BASE); + *(vu_long *)MPC5XXX_BOOTCS_STOP = + *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE); + /* Interbus enable it here ?? */ + *(vu_long *)MPC5XXX_GPT6_ENABLE = GPT_OUT_1; + return 0; +} +#ifdef CONFIG_PCI +static struct pci_controller hose; + +extern void pci_mpc5xxx_init(struct pci_controller *); + +void pci_init_board(void) +{ + pci_mpc5xxx_init(&hose); +} +#endif + +#if defined(CONFIG_HW_WATCHDOG) +void hw_watchdog_reset(void) +{ + /* Trigger HW Watchdog with TIMER_0 */ + *(vu_long *)MPC5XXX_GPT0_ENABLE = GPT_OUT_1; + *(vu_long *)MPC5XXX_GPT0_ENABLE = GPT_OUT_0; +} +#endif diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c index dede996880..ace4aa2cae 100644 --- a/board/v38b/v38b.c +++ b/board/v38b/v38b.c @@ -191,16 +191,8 @@ int checkboard (void) return 0; } - -int board_early_init_r(void) +int board_early_init_f(void) { - /* - * Now, when we are in RAM, enable flash write access for the - * detection process. Note that CS_BOOT cannot be cleared when - * executing in flash. - */ - *(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ - #ifdef CONFIG_HW_WATCHDOG /* * Enable and configure the direction (output) of PSC3_9 - watchdog @@ -210,6 +202,17 @@ int board_early_init_r(void) *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9; *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC3_9; #endif /* CONFIG_HW_WATCHDOG */ + return 0; +} + +int board_early_init_r(void) +{ + /* + * Now, when we are in RAM, enable flash write access for the + * detection process. Note that CS_BOOT cannot be cleared when + * executing in flash. + */ + *(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ /* * Enable GPIO_WKUP_7 to "read the status of the actual power diff --git a/common/cmd_boot.c b/common/cmd_boot.c index 182e2ab980..e68f16f9da 100644 --- a/common/cmd_boot.c +++ b/common/cmd_boot.c @@ -83,7 +83,7 @@ U_BOOT_CMD( extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); U_BOOT_CMD( - reset, CFG_MAXARGS, 1, do_reset, + reset, 1, 0, do_reset, "reset - Perform RESET of the CPU\n", NULL ); diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c index b7e00b3e24..7e65821852 100644 --- a/cpu/mpc5xxx/cpu_init.c +++ b/cpu/mpc5xxx/cpu_init.c @@ -123,7 +123,7 @@ void cpu_init_f (void) #endif #if defined(CFG_CS7_START) && defined(CFG_CS7_SIZE) - *(vu_long *)MPC5XXX_CS7_START = START_REG(CFG_CS5_START); + *(vu_long *)MPC5XXX_CS7_START = START_REG(CFG_CS7_START); *(vu_long *)MPC5XXX_CS7_STOP = STOP_REG(CFG_CS7_START, CFG_CS7_SIZE); addecr |= (1 << 27); #endif diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index 37fe3e7153..71c1bfab1a 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -376,7 +376,7 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) #if (DEBUG & 0x2) if (fec->xcv_type != SEVENWIRE) - mpc5xxx_fec_phydump (); + mpc5xxx_fec_phydump (dev->name); #endif /* @@ -575,7 +575,7 @@ static void mpc5xxx_fec_halt(struct eth_device *dev) #if (DEBUG & 0x2) if (fec->xcv_type != SEVENWIRE) - mpc5xxx_fec_phydump (); + mpc5xxx_fec_phydump (dev->name); #endif /* @@ -882,7 +882,8 @@ int mpc5xxx_fec_initialize(bd_t * bis) defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0) || \ defined(CONFIG_MCC200) || defined(CONFIG_O2DNT) || \ defined(CONFIG_PM520) || defined(CONFIG_TOP5200) || \ - defined(CONFIG_TQM5200) || defined(CONFIG_V38B) + defined(CONFIG_TQM5200) || defined(CONFIG_V38B) || \ + defined(CONFIG_UC101) # ifndef CONFIG_FEC_10MBIT fec->xcv_type = MII100; # else diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c index 8ae584f2e1..9d0fc6b4fa 100644 --- a/cpu/mpc8xx/serial.c +++ b/cpu/mpc8xx/serial.c @@ -227,8 +227,17 @@ static int smc_init (void) sp->smc_smcm = 0; sp->smc_smce = 0xff; -#ifdef CFG_SPC1920_SMC1_CLK4 /* clock source is PLD */ - *((volatile uchar *) CFG_SPC1920_PLD_BASE+6) = 0xff; +#ifdef CFG_SPC1920_SMC1_CLK4 + /* clock source is PLD */ + + /* set freq to 19200 Baud */ + *((volatile uchar *) CFG_SPC1920_PLD_BASE+6) = 0x3; + /* configure clk4 as input */ + im->im_ioport.iop_pdpar |= 0x800; + im->im_ioport.iop_pddir &= ~0x800; + + cp->cp_simode = 0x0000; + cp->cp_simode |= 0x7000; #else /* Set up the baud rate generator */ smc_setbrg (); diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index 9c5c9109b1..57a7e8d6e2 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -332,24 +332,44 @@ int checkcpu (void) strcpy(addstr, "No Security/Kasumi support"); break; - case PVR_440SP_RA: - puts("SP Rev. A"); + case PVR_440SP_6_RAB: + puts("SP Rev. A/B"); + strcpy(addstr, "RAID 6 support"); break; - case PVR_440SP_RB: - puts("SP Rev. B"); + case PVR_440SP_RAB: + puts("SP Rev. A/B"); + strcpy(addstr, "No RAID 6 support"); + break; + + case PVR_440SP_6_RC: + puts("SP Rev. C"); + strcpy(addstr, "RAID 6 support"); break; case PVR_440SP_RC: puts("SP Rev. C"); + strcpy(addstr, "No RAID 6 support"); + break; + + case PVR_440SPe_6_RA: + puts("SPe Rev. A"); + strcpy(addstr, "RAID 6 support"); break; case PVR_440SPe_RA: puts("SPe Rev. A"); + strcpy(addstr, "No RAID 6 support"); + break; + + case PVR_440SPe_6_RB: + puts("SPe Rev. B"); + strcpy(addstr, "RAID 6 support"); break; case PVR_440SPe_RB: puts("SPe Rev. B"); + strcpy(addstr, "No RAID 6 support"); break; default: @@ -419,7 +439,7 @@ int ppc440spe_revB() { unsigned int pvr; pvr = get_pvr(); - if (pvr == PVR_440SPe_RB) + if ((pvr == PVR_440SPe_6_RB) || (pvr == PVR_440SPe_RB)) return 1; else return 0; diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 9e24b33f5a..e2aa867c94 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -31,8 +31,6 @@ DECLARE_GLOBAL_DATA_PTR; #endif -#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data) - #ifdef CFG_INIT_DCACHE_CS # if (CFG_INIT_DCACHE_CS == 0) # define PBxAP pb0ap @@ -221,6 +219,10 @@ void set_chip_gpio_configuration(gpio_param_s (*gpio_tab)[GPIO_GROUP_MAX][GPIO_M void cpu_init_f (void) { +#if defined(CONFIG_WATCHDOG) + unsigned long val; +#endif + #if defined(CONFIG_405EP) /* * GPIO0 setup (select GPIO or alternate function) @@ -312,12 +314,11 @@ cpu_init_f (void) #endif #if defined (CONFIG_SOLIDCARD3) -mtebc(epcr, 0xb84ef000); -*(unsigned long *)0x79000080 = 0x0001; + mtebc(epcr, 0xb84ef000); + *(unsigned long *)0x79000080 = 0x0001; #endif -#if defined(CONFIG_WATCHDOG) - unsigned long val; +#if defined(CONFIG_WATCHDOG) val = mfspr(tcr); #if defined(CONFIG_440EP) || defined(CONFIG_440GR) val |= 0xb8000000; /* generate system reset after 1.34 seconds */ diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c index f06038e998..294b89cb2a 100644 --- a/cpu/ppc4xx/sdram.c +++ b/cpu/ppc4xx/sdram.c @@ -380,7 +380,7 @@ long int initdram(int board_type) mtsdram(mem_b0cr, mb0cf[i].reg); mtsdram(mem_tr0, 0x41094012); mtsdram(mem_tr1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/ - mtsdram(mem_rtr, 0x7e000000); /* Interval 15.20µs @ 133MHz PLB*/ + mtsdram(mem_rtr, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */ mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM*/ udelay(400); /* Delay 200 usecs (min) */ diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c index 7fdf57b177..8495829900 100644 --- a/drivers/nand/nand_base.c +++ b/drivers/nand/nand_base.c @@ -2338,7 +2338,7 @@ int nand_scan (struct mtd_info *mtd, int maxchips) mtd->oobblock = 1024 << (extid & 0x3); extid >>= 2; /* Calc oobsize */ - mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512); + mtd->oobsize = (8 << (extid & 0x01)) * (mtd->oobblock / 512); extid >>= 2; /* Calc blocksize. Blocksize is multiples of 64KiB */ mtd->erasesize = (64 * 1024) << (extid & 0x03); diff --git a/dtt/Makefile b/dtt/Makefile index 79d4e9f96f..e6cb128f3d 100644 --- a/dtt/Makefile +++ b/dtt/Makefile @@ -30,7 +30,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)libdtt.a -COBJS = lm75.o ds1621.o adm1021.o +COBJS = lm75.o ds1621.o adm1021.o lm81.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/dtt/lm81.c b/dtt/lm81.c new file mode 100644 index 0000000000..03bc53d58c --- /dev/null +++ b/dtt/lm81.c @@ -0,0 +1,148 @@ +/* + * (C) Copyright 2006 + * Heiko Schocher, DENX Software Enginnering <hs@denx.de> + * + * based on dtt/lm75.c which is ... + * + * (C) Copyright 2001 + * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * On Semiconductor's LM81 Temperature Sensor + */ + +#include <common.h> + +#ifdef CONFIG_DTT_LM81 +#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ + (CFG_EEPROM_PAGE_WRITE_BITS < 1) +# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM81" +#endif + +#include <i2c.h> +#include <dtt.h> + +/* + * Device code + */ +#define DTT_I2C_DEV_CODE 0x2c /* ON Semi's LM81 device */ + +int dtt_read(int sensor, int reg) +{ + int dlen = 1; + uchar data[2]; + + /* + * Calculate sensor address and register. + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x03); /* calculate address of lm81 */ + + /* + * Now try to read the register. + */ + if (i2c_read(sensor, reg, 1, data, dlen) != 0) + return -1; + + return (int)data[0]; +} /* dtt_read() */ + + +int dtt_write(int sensor, int reg, int val) +{ + uchar data; + + /* + * Calculate sensor address and register. + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x03); /* calculate address of lm81 */ + + data = (char)(val & 0xff); + + /* + * Write value to register. + */ + if (i2c_write(sensor, reg, 1, &data, 1) != 0) + return 1; + + return 0; +} /* dtt_write() */ + +#define DTT_MANU 0x3e +#define DTT_REV 0x3f +#define DTT_CONFIG 0x40 +#define DTT_ADR 0x48 + +static int _dtt_init(int sensor) +{ + int man; + int adr; + int rev; + + if (dtt_write (sensor, DTT_CONFIG, 0x01) < 0) + return 1; + /* The LM81 needs 400ms to get the correct values ... */ + udelay (400000); + man = dtt_read (sensor, DTT_MANU); + if (man != 0x01) + return 1; + adr = dtt_read (sensor, DTT_ADR); + if (adr < 0) + return 1; + rev = dtt_read (sensor, DTT_REV); + if (adr < 0) + return 1; + + printf ("DTT: Found LM81@%x Rev: %d\n", adr, rev); + return 0; +} /* _dtt_init() */ + + +int dtt_init (void) +{ + int i; + unsigned char sensors[] = CONFIG_DTT_SENSORS; + const char *const header = "DTT: "; + + for (i = 0; i < sizeof(sensors); i++) { + if (_dtt_init(sensors[i]) != 0) + printf("%s%d FAILED INIT\n", header, i+1); + else + printf("%s%d is %i C\n", header, i+1, + dtt_get_temp(sensors[i])); + } + + return (0); +} /* dtt_init() */ + +#define TEMP_FROM_REG(temp) \ + ((temp)<256?((((temp)&0x1fe) >> 1) * 10) + ((temp) & 1) * 5: \ + ((((temp)&0x1fe) >> 1) -255) * 10 - ((temp) & 1) * 5) \ + +int dtt_get_temp(int sensor) +{ + int val = dtt_read (sensor, DTT_READ_TEMP); + int tmpcnf = dtt_read (sensor, DTT_CONFIG_TEMP); + + return (TEMP_FROM_REG((val << 1) + ((tmpcnf & 0x80) >> 7))) / 10; +} /* dtt_get_temp() */ + +#endif /* CONFIG_DTT_LM81 */ diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 6619686876..f102600038 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -747,11 +747,14 @@ #define PVR_440GX_RC 0x51B21892 #define PVR_440GX_RF 0x51B21894 #define PVR_405EP_RB 0x51210950 -#define PVR_440SP_RA 0x53221850 -#define PVR_440SP_RB 0x53221891 -#define PVR_440SP_RC 0x53221892 -#define PVR_440SPe_RA 0x53421890 -#define PVR_440SPe_RB 0x53421891 +#define PVR_440SP_6_RAB 0x53221850 /* 440SP rev A&B with RAID 6 support enabled */ +#define PVR_440SP_RAB 0x53321850 /* 440SP rev A&B without RAID 6 support */ +#define PVR_440SP_6_RC 0x53221891 /* 440SP rev C with RAID 6 support enabled */ +#define PVR_440SP_RC 0x53321891 /* 440SP rev C without RAID 6 support */ +#define PVR_440SPe_6_RA 0x53421890 /* 440SPe rev A with RAID 6 support enabled */ +#define PVR_440SPe_RA 0x53521890 /* 440SPe rev A without RAID 6 support */ +#define PVR_440SPe_6_RB 0x53421891 /* 440SPe rev B with RAID 6 support enabled */ +#define PVR_440SPe_RB 0x53521891 /* 440SPe rev B without RAID 6 support */ #define PVR_601 0x00010000 #define PVR_602 0x00050000 #define PVR_603 0x00030000 diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 08674ca49f..7069b35ad6 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -231,6 +231,17 @@ "protect on FC000000 +${filesize}\0" #endif +#ifndef CONFIG_CAM5200 +#define CUSTOM_ENV_SETTINGS \ + "bootfile=/tftpboot/tqm5200/uImage\0" \ + "u-boot=/tftpboot/tqm5200/u-boot.bin\0" +#else +#define CUSTOM_ENV_SETTINGS \ + "bootfile=cam5200/uImage\0" \ + "u-boot=cam5200/u-boot.bin\0" \ + "setup=tftp 200000 cam5200/setup.img; autoscr 200000\0" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ @@ -248,8 +259,7 @@ "bootm ${kernel_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \ "bootm\0" \ - "bootfile=/tftpboot/tqm5200/uImage\0" \ - "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ + CUSTOM_ENV_SETTINGS \ "load=tftp 200000 ${u-boot}\0" \ ENV_UPDT \ "" @@ -325,15 +335,7 @@ */ #define CFG_FLASH_BASE 0xFC000000 -#ifndef CONFIG_CAM5200 -/* use CFI flash driver */ -#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } -#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks - (= chip selects) */ -#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ -#else /* CONFIG_CAM5200 */ +#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) #define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks (= chip selects) */ #define CFG_FLASH_WORD_SIZE unsigned int /* main flash device with */ @@ -344,7 +346,15 @@ #define CFG_FLASH_ADDR1 0x2AA #define CFG_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */ #define CFG_MAX_FLASH_SECT 128 -#endif /* ifndef CONFIG_CAM5200 */ +#else +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#endif #define CFG_FLASH_EMPTY_INFO #define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index bbe6b76bff..49027da5a4 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -166,8 +166,23 @@ "cp.b 100000 fffc0000 40000;" \ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ + "ethprime=ppc_4xx_eth3\0" \ + "ethact=ppc_4xx_eth3\0" \ + "autoload=no\0" \ + "ipconfig=dhcp;setenv serverip 11.0.0.152\0" \ + "actkernel=kernel2\0" \ + "load_fpga=fpga load 0 ffe00000 10dd9a\0" \ + "mtdargs=setenv bootargs root=/dev/mtdblock6 rw " \ + "rootfstype=jffs2 init=/sbin/init\0" \ + "kernel1_mtd=nand read 200000 0 200000;run mtdargs addip addtty"\ + ";bootm 200000\0" \ + "kernel2_mtd=nand read 200000 200000 200000;run mtdargs addip " \ + "addtty;bootm 200000\0" \ + "kernel1=run ipconfig load_fpga kernel1_mtd\0" \ + "kernel2=run ipconfig load_fpga kernel2_mtd\0" \ "" -#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_BOOTCOMMAND "run kernel2" #define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */ @@ -291,6 +306,8 @@ /*----------------------------------------------------------------------- * Definitions for GPIO setup *-----------------------------------------------------------------------*/ +#define CFG_GPIO_SHUTDOWN (0x80000000 >> 6) +#define CFG_GPIO_SSD_EMPTY (0x80000000 >> 9) #define CFG_GPIO_EREADY (0x80000000 >> 26) #define CFG_GPIO_REV0 (0x80000000 >> 14) #define CFG_GPIO_REV1 (0x80000000 >> 15) diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 00b92220c1..e7f0108892 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -188,7 +188,10 @@ /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ -#define CFG_MBYTES_SDRAM (256) /* 256MB */ +#define CFG_MBYTES_SDRAM (256) /* 256MB */ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ +#endif /*----------------------------------------------------------------------- * I2C diff --git a/include/configs/SOLIDCARD3.h b/include/configs/solidcard3.h index 16e68b529f..867cba5a35 100644 --- a/include/configs/SOLIDCARD3.h +++ b/include/configs/solidcard3.h @@ -94,7 +94,7 @@ * define CONFIG_BAUDRATE to the baudrate value you want to use as default */ #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ +#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ #define CFG_DEVICE_NULLDEV 1 /* include nulldev device */ @@ -137,7 +137,7 @@ #define CONFIG_PHY_ADDR 1 /* the connected Phy defaults to address 1 */ #define CONFIG_COMMANDS \ - (CONFIG_CMD_DFL | \ + (CONFIG_CMD_DFL | \ CFG_CMD_PCI | \ CFG_CMD_IRQ | \ CFG_CMD_NET | \ @@ -183,8 +183,8 @@ * Consider the OPB clock! If it get lower the BASE_BAUD must be lower to * (see 405GP datasheet for descritpion) */ -#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ -#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ #define CFG_BASE_BAUD 921600 /* internal clock */ /* The following table includes the supported baudrates */ @@ -201,7 +201,7 @@ *----------------------------------------------------------------------- */ #define CONFIG_HARD_I2C /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ #define I2C_INIT #define I2C_ACTIVE 0 @@ -217,26 +217,26 @@ * PCI stuff *----------------------------------------------------------------------- */ -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ +#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - /* resource configuration */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + /* resource configuration */ /* If you want to see, whats connected to your PCI bus */ /* #define CONFIG_PCI_SCAN_SHOW */ -#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */ -#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */ -#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ -#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#define CFG_PCI_PTM2LA 0x00000000 /* disabled */ -#define CFG_PCI_PTM2MS 0x00000000 /* disabled */ -#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ +#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */ +#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */ +#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ +#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#define CFG_PCI_PTM2LA 0x00000000 /* disabled */ +#define CFG_PCI_PTM2MS 0x00000000 /* disabled */ +#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ /*----------------------------------------------------------------------- * External peripheral base address @@ -244,8 +244,8 @@ */ #if !(CONFIG_COMMANDS & CFG_CMD_IDE) -#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* no reset for ide supported */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ /*----------------------------------------------------------------------- * IDE/ATA stuff @@ -254,9 +254,9 @@ #else /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */ #define CONFIG_START_IDE 1 /* check, if use IDE */ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* no reset for ide supported */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ #define CONFIG_ATAPI #define CONFIG_DOS_PARTITION @@ -345,7 +345,7 @@ extern unsigned long offsetOfEnvironment; */ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- - * FLASH organization // FIXME: lookup in datasheet + * FLASH organization ## FIXME: lookup in datasheet */ #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ #define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ @@ -360,8 +360,8 @@ extern unsigned long offsetOfEnvironment; #define CFG_ENV_IS_IN_FLASH 1 #if CFG_ENV_IS_IN_FLASH #define CFG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector in bottom type */ - #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - #define CFG_ENV_SECT_SIZE 0x4000 /* see README - env sector total size */ + #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + #define CFG_ENV_SECT_SIZE 0x4000 /* see README - env sector total size */ #endif /* let us changing anything in our environment */ #define CONFIG_ENV_OVERWRITE @@ -421,21 +421,21 @@ extern unsigned long offsetOfEnvironment; #undef CFG_INIT_DCACHE_CS /* Where the internal SRAM starts */ -#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* Where the internal SRAM ends (only offset) */ -#define CFG_INIT_RAM_END 0x0F00 +#define CFG_INIT_RAM_END 0x0F00 /* CFG_INIT_RAM_ADDR ------> ------------ lower address - | | - | ^ | - | | | - | | Stack | + | | + | ^ | + | | | + | | Stack | CFG_GBL_DATA_OFFSET ----> ------------ - | | - | 64 Bytes | - | | + | | + | 64 Bytes | + | | CFG_INIT_RAM_END ------> ------------ higher address (offset only) diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h index 9d3609a67d..09bbebdce8 100644 --- a/include/configs/spc1920.h +++ b/include/configs/spc1920.h @@ -44,19 +44,19 @@ #define CONFIG_BAUDRATE 19200 /* use PLD CLK4 instead of brg */ -#undef CFG_SPC1920_SMC1_CLK4 +#define CFG_SPC1920_SMC1_CLK4 #define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ #define CONFIG_8xx_CPUCLK_DEFAULT 50000000 #define CFG_8xx_CPUCLK_MIN 40000000 #define CFG_8xx_CPUCLK_MAX 133000000 -#define CFG_RESET_ADDRESS 0xf8000000 +#define CFG_RESET_ADDRESS 0xC0000000 #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_LAST_STAGE_INIT - -#if 1 +#if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ @@ -83,12 +83,13 @@ #ifndef CONFIG_COMMANDS #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ + | CFG_CMD_DATE \ | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_JFFS2 \ | CFG_CMD_PING \ | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ + | CFG_CMD_I2C \ | CFG_CMD_MII) /* & ~( CFG_CMD_NET)) */ @@ -193,13 +194,39 @@ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#ifdef CFG_CMD_DATE +# define CONFIG_RTC_DS3231 +# define CFG_I2C_RTC_ADDR 0x68 +#endif + /*----------------------------------------------------------------------- * I2C configuration */ #if (CONFIG_COMMANDS & CFG_CMD_I2C) -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address defaults */ -#define CFG_I2C_SLAVE 0x7F +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ + +#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */ +#define CFG_I2C_SLAVE 0xFE + +#ifdef CONFIG_SOFT_I2C +/* + * Software (bit-bang) I2C driver configuration + */ +#define PB_SCL 0x00000020 /* PB 26 */ +#define PB_SDA 0x00000010 /* PB 27 */ + +#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) +#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) +#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) +#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) +#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ + else immr->im_cpm.cp_pbdat &= ~PB_SDA +#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ + else immr->im_cpm.cp_pbdat &= ~PB_SCL +#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */ +#endif /* CONFIG_SOFT_I2C */ #endif /*----------------------------------------------------------------------- @@ -220,7 +247,7 @@ *----------------------------------------------------------------------- * PCMCIA config., multi-function pin tri-state */ -#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#define CFG_SIUMCR (SIUMCR_FRC) /*----------------------------------------------------------------------- * TBSCR - Time Base Status and Control 11-26 @@ -283,7 +310,7 @@ * FLASH timing: */ #define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ - OR_SCY_3_CLK | OR_EHTR | OR_BI) + OR_SCY_6_CLK | OR_EHTR | OR_BI) #define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) #define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) @@ -330,7 +357,56 @@ MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */ -/* PLD CS5 */ +/* + * DSP Host Port Interface CS3 + */ +#define CFG_SPC1920_HPI_BASE 0x90000000 +#define CFG_PRELIM_OR3_AM 0xF8000000 + +#define CFG_OR3 (CFG_PRELIM_OR3_AM | \ + OR_G5LS | \ + OR_SCY_0_CLK | \ + OR_BI) + +#define CFG_BR3 ((CFG_SPC1920_HPI_BASE & BR_BA_MSK) | \ + BR_MS_UPMA | \ + BR_PS_16 | \ + BR_V); + +#define CFG_MAMR (MAMR_GPL_A4DIS | \ + MAMR_RLFA_5X | \ + MAMR_WLFA_5X) + +#define CONFIG_SPC1920_HPI_TEST + +#ifdef CONFIG_SPC1920_HPI_TEST +#define HPI_REG(x) (*((volatile u16 *) (CFG_SPC1920_HPI_BASE + x))) +#define HPI_HPIC_1 HPI_REG(0) +#define HPI_HPIC_2 HPI_REG(2) +#define HPI_HPIA_1 HPI_REG(0x2000008) +#define HPI_HPIA_2 HPI_REG(0x2000008 + 2) +#define HPI_HPID_INC_1 HPI_REG(0x1000004) +#define HPI_HPID_INC_2 HPI_REG(0x1000004 + 2) +#define HPI_HPID_NOINC_1 HPI_REG(0x300000c) +#define HPI_HPID_NOINC_2 HPI_REG(0x300000c + 2) +#endif /* CONFIG_SPC1920_HPI_TEST */ + +/* + * Ramtron FM18L08 FRAM 32KB on CS4 + */ +#define CFG_SPC1920_FRAM_BASE 0x80100000 +#define CFG_PRELIM_OR4_AM 0xffff8000 +#define CFG_OR4 (CFG_PRELIM_OR4_AM | \ + OR_ACS_DIV2 | \ + OR_BI | \ + OR_SCY_4_CLK | \ + OR_TRLX) + +#define CFG_BR4 ((CFG_SPC1920_FRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V); + +/* + * PLD CS5 + */ #define CFG_SPC1920_PLD_BASE 0x80000000 #define CFG_PRELIM_OR5_AM 0xffff8000 @@ -343,10 +419,6 @@ #define CFG_BR5_PRELIM ((CFG_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V); -/* #define CFG_PLD_BASE 0x30000000 */ -/* #define CFG_OR5_PRELIM 0xffff1110 */ -/* #define CFG_BR5_PRELIM 0x30000401 */ - /* * Internal Definitions * diff --git a/include/configs/uc101.h b/include/configs/uc101.h new file mode 100644 index 0000000000..8cd8e9be70 --- /dev/null +++ b/include/configs/uc101.h @@ -0,0 +1,353 @@ +/* + * (C) Copyright 2003-2006 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_UC101 1 /* UC101 board */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +#define CONFIG_BOARD_EARLY_INIT_R + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* Partitions */ +#define CONFIG_DOS_PARTITION + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_DATE | \ + CFG_CMD_DISPLAY | \ + CFG_CMD_DHCP | \ + CFG_CMD_PING | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_DTT | \ + CFG_CMD_IDE | \ + CFG_CMD_FAT | \ + CFG_CMD_NFS | \ + CFG_CMD_MII | \ + CFG_CMD_SNTP ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ + +#if (TEXT_BASE == 0xFFF00000) /* Boot low */ +# define CFG_LOWBOOT 1 +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addwdt=setenv bootargs ${bootargs} wdt=off" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp 300000 ${bootfile};run nfsargs addip addwdt;bootm\0" \ + "rootpath=/opt/eldk/ppc_82xx\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run net_nfs" + +#define CONFIG_MISC_INIT_R 1 + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ + +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR 0x58 +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +/* for LM81 */ +#define CFG_EEPROM_PAGE_WRITE_ENABLE + +/* + * RTC configuration + */ +#define CONFIG_RTC_PCF8563 +#define CFG_I2C_RTC_ADDR 0x51 + +/* I2C SYSMON (LM75) */ +#define CONFIG_DTT_LM81 1 /* ON Semi's LM75 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 + +/* + * Flash configuration + */ +#define CFG_FLASH_BASE 0xFF800000 + +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_MAX_FLASH_SECT 140 /* max num of sects on one chip */ + +#define CFG_ENV_ADDR (TEXT_BASE+0x40000) /* second sector */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_CFI_AMD_RESET + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x4000 +#define CFG_ENV_SECT_SIZE 0x10000 +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SRAM_BASE 0x80100000 /* CS 1 */ +#define CFG_DISPLAY_BASE 0x80600000 /* CS 3 */ +#define CFG_IB_MASTER 0xc0510000 /* CS 6 */ +#define CFG_IB_EPLD 0xc0500000 /* CS 7 */ + +/* Settings for XLB = 132 MHz */ +#define SDRAM_DDR 1 +#define SDRAM_MODE 0x018D0000 +#define SDRAM_EMODE 0x40090000 +#define SDRAM_CONTROL 0x714f0f00 +#define SDRAM_CONFIG1 0x73722930 +#define SDRAM_CONFIG2 0x47770000 +#define SDRAM_TAPDELAY 0x10000000 + +/* SRAM */ +#define SRAM_BASE CFG_SRAM_BASE /* SRAM base address */ +#define SRAM_LEN 0x1fffff +#define SRAM_END (SRAM_BASE + SRAM_LEN) + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif + + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CFG_MALLOC_LEN (512 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_PHY_ADDR 0x00 +#define CONFIG_MII 1 + +/* + * GPIO configuration + */ +#define CFG_GPS_PORT_CONFIG 0x4d558044 + +/*use Hardware WDT */ +#define CONFIG_HW_WATCHDOG + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +/* Enable an alternate, more extensive memory test */ +#define CFG_ALT_MEMTEST + +#define CFG_MEMTEST_START 0x00300000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 3 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x300000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, + * which is normally part of the default commands (CFV_CMD_DFL) + */ +#define CONFIG_LOOPW + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE +#else +#define CFG_HID0_INIT 0 +#define CFG_HID0_FINAL 0 +#endif + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00045D00 +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +/* 8Mbit SRAM @0x80100000 */ +#define CFG_CS1_START CFG_SRAM_BASE +#define CFG_CS1_SIZE 0x00100000 +#define CFG_CS1_CFG 0x21D00 + +/* Display H1, Status Inputs, EPLD @0x80600000 8 Bit */ +#define CFG_CS3_START CFG_DISPLAY_BASE +#define CFG_CS3_SIZE 0x00000100 +#define CFG_CS3_CFG 0x00081802 + +/* Interbus Master 16 Bit */ +#define CFG_CS6_START CFG_IB_MASTER +#define CFG_CS6_SIZE 0x00010000 +#define CFG_CS6_CFG 0x00FF3500 + +/* Interbus EPLD 8 Bit */ +#define CFG_CS7_START CFG_IB_EPLD +#define CFG_CS7_SIZE 0x00010000 +#define CFG_CS7_CFG 0x00081800 + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333333 + +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ + +#define CONFIG_IDE_PREINIT 1 +/* #define CONFIG_IDE_RESET 1 beispile siehe tqm5200.c */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + +#define CONFIG_ATAPI 1 + +/*---------------------------------------------------------------------*/ +/* Display addresses */ +/*---------------------------------------------------------------------*/ +#define CFG_DISP_CHR_RAM (CFG_DISPLAY_BASE + 0x38) +#define CFG_DISP_CWORD (CFG_DISPLAY_BASE + 0x30) + +#endif /* __CONFIG_H */ diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 554a7a41b8..e19591d299 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -39,6 +39,7 @@ #define CONFIG_NETCONSOLE 1 #define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* do board-specific init */ #define CFG_XLB_PIPELINING 1 /* gives better performance */ @@ -101,7 +102,7 @@ CFG_CMD_IRQ | \ CFG_CMD_JFFS2 | \ CFG_CMD_MII | \ - CFG_CMD_SDRAMi | \ + CFG_CMD_SDRAM | \ CFG_CMD_DATE | \ CFG_CMD_USB | \ CFG_CMD_FAT) @@ -135,7 +136,7 @@ "preboot=echo;echo Type \"run flash_nfs\" to mount root " \ "filesystem over NFS; echo\0" \ "netdev=eth0\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "ramargs=setenv bootargs root=/dev/ram rw wdt=off \0" \ "addip=setenv bootargs $(bootargs) " \ "ip=$(ipaddr):$(serverip):$(gatewayip):" \ "$(netmask):$(hostname):$(netdev):off panic=1\0" \ @@ -144,7 +145,7 @@ "$(ramdisk_addr)\0" \ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath)\0" \ + "nfsroot=$(serverip):$(rootpath) wdt=off\0" \ "hostname=v38b\0" \ "ethact=FEC ETHERNET\0" \ "rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \ diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h index 58717f8a60..911a52dbcf 100644 --- a/include/configs/yellowstone.h +++ b/include/configs/yellowstone.h @@ -302,6 +302,20 @@ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE +#define CFG_CPLD 0x80000000 + +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x03017300 +#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000) + +/* Memory Bank 2 (CPLD) initialization */ +#define CFG_EBC_PB2AP 0x04814500 +#define CFG_EBC_PB2CR (CFG_CPLD | 0x18000) + +/*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 6e942abcaa..2cc18db9a5 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -307,6 +307,20 @@ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE +#define CFG_CPLD 0x80000000 + +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x03017300 +#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000) + +/* Memory Bank 2 (CPLD) initialization */ +#define CFG_EBC_PB2AP 0x04814500 +#define CFG_EBC_PB2CR (CFG_CPLD | 0x18000) + +/*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ diff --git a/include/dtt.h b/include/dtt.h index a17aa67703..842a761c90 100644 --- a/include/dtt.h +++ b/include/dtt.h @@ -29,6 +29,7 @@ #if defined(CONFIG_DTT_LM75) || \ defined(CONFIG_DTT_DS1621) || \ + defined(CONFIG_DTT_LM81) || \ defined(CONFIG_DTT_ADM1021) #define CONFIG_DTT /* We have a DTT */ @@ -58,6 +59,14 @@ extern int dtt_get_temp(int sensor); #define DTT_TEMP_SET 0x3 #endif +#if defined(CONFIG_DTT_LM81) +#define DTT_READ_TEMP 0x27 +#define DTT_CONFIG_TEMP 0x4b +#define DTT_TEMP_MAX 0x39 +#define DTT_TEMP_HYST 0x3a +#define DTT_CONFIG 0x40 +#endif + #if defined(CONFIG_DTT_DS1621) #define DTT_READ_TEMP 0xAA #define DTT_READ_COUNTER 0xA8 diff --git a/include/ppc440.h b/include/ppc440.h index 50f4ec403b..91cff414af 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -887,12 +887,14 @@ /* PLB4 Arbiter - PowerPC440EP Pass1 */ #define PLB4_DCR_BASE 0x080 +#define plb4_acr (PLB4_DCR_BASE+0x1) #define plb4_revid (PLB4_DCR_BASE+0x2) -#define plb4_acr (PLB4_DCR_BASE+0x3) #define plb4_besr (PLB4_DCR_BASE+0x4) #define plb4_bearl (PLB4_DCR_BASE+0x6) #define plb4_bearh (PLB4_DCR_BASE+0x7) +#define PLB4_ACR_WRP (0x80000000 >> 7) + /* Nebula PLB4 Arbiter - PowerPC440EP */ #define PLB_ARBITER_BASE 0x80 @@ -3284,26 +3286,26 @@ typedef struct { unsigned long add; /* gpio core base address */ /* * Macros for accessing the indirect EBC registers */ -#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data) -#define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd) +#define mtebc(reg, data) { mtdcr(ebccfga,reg);mtdcr(ebccfgd,data); } +#define mfebc(reg, data) { mtdcr(ebccfga,reg);data = mfdcr(ebccfgd); } /* * Macros for accessing the indirect SDRAM controller registers */ -#define mtsdram(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data) -#define mfsdram(reg, data) mtdcr(memcfga,reg);data = mfdcr(memcfgd) +#define mtsdram(reg, data) { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } +#define mfsdram(reg, data) { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } /* * Macros for accessing the indirect clocking controller registers */ -#define mtclk(reg, data) mtdcr(clkcfga,reg);mtdcr(clkcfgd,data) -#define mfclk(reg, data) mtdcr(clkcfga,reg);data = mfdcr(clkcfgd) +#define mtclk(reg, data) { mtdcr(clkcfga,reg);mtdcr(clkcfgd,data); } +#define mfclk(reg, data) { mtdcr(clkcfga,reg);data = mfdcr(clkcfgd); } /* * Macros for accessing the sdr controller registers */ -#define mtsdr(reg, data) mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data) -#define mfsdr(reg, data) mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd) +#define mtsdr(reg, data) { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); } +#define mfsdr(reg, data) { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); } #ifndef __ASSEMBLY__ diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile index a71f583edd..b42da8cf68 100644 --- a/nand_spl/board/amcc/sequoia/Makefile +++ b/nand_spl/board/amcc/sequoia/Makefile @@ -76,7 +76,9 @@ $(obj)init.S: $(obj)sdram.c: @rm -f $(obj)sdram.c + @rm -f $(obj)sdram.h ln -s $(SRCTREE)/board/amcc/sequoia/sdram.c $(obj)sdram.c + ln -s $(SRCTREE)/board/amcc/sequoia/sdram.h $(obj)sdram.h # from nand_spl directory $(obj)nand_boot.c: diff --git a/rtc/Makefile b/rtc/Makefile index cf2b24ef0d..cdc8ac934f 100644 --- a/rtc/Makefile +++ b/rtc/Makefile @@ -29,7 +29,7 @@ LIB = $(obj)librtc.a COBJS = date.o \ bf533_rtc.o ds12887.o ds1302.o ds1306.o ds1307.o \ - ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o \ + ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o ds3231.o \ m41t11.o max6900.o m48t35ax.o mc146818.o mk48t59.o \ mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o diff --git a/rtc/ds3231.c b/rtc/ds3231.c new file mode 100644 index 0000000000..50aeeb5615 --- /dev/null +++ b/rtc/ds3231.c @@ -0,0 +1,193 @@ +/* + * (C) Copyright 2006 + * Markus Klotzbuecher, mk@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim) + * Extremly Accurate DS3231 Real Time Clock (RTC). + * + * copied from ds1337.c + */ + +#include <common.h> +#include <command.h> +#include <rtc.h> +#include <i2c.h> + +#if defined(CONFIG_RTC_DS3231) && (CONFIG_COMMANDS & CFG_CMD_DATE) + +/*---------------------------------------------------------------------*/ +#undef DEBUG_RTC + +#ifdef DEBUG_RTC +#define DEBUGR(fmt,args...) printf(fmt ,##args) +#else +#define DEBUGR(fmt,args...) +#endif +/*---------------------------------------------------------------------*/ + +/* + * RTC register addresses + */ +#define RTC_SEC_REG_ADDR 0x0 +#define RTC_MIN_REG_ADDR 0x1 +#define RTC_HR_REG_ADDR 0x2 +#define RTC_DAY_REG_ADDR 0x3 +#define RTC_DATE_REG_ADDR 0x4 +#define RTC_MON_REG_ADDR 0x5 +#define RTC_YR_REG_ADDR 0x6 +#define RTC_CTL_REG_ADDR 0x0e +#define RTC_STAT_REG_ADDR 0x0f + + +/* + * RTC control register bits + */ +#define RTC_CTL_BIT_A1IE 0x1 /* Alarm 1 interrupt enable */ +#define RTC_CTL_BIT_A2IE 0x2 /* Alarm 2 interrupt enable */ +#define RTC_CTL_BIT_INTCN 0x4 /* Interrupt control */ +#define RTC_CTL_BIT_RS1 0x8 /* Rate select 1 */ +#define RTC_CTL_BIT_RS2 0x10 /* Rate select 2 */ +#define RTC_CTL_BIT_DOSC 0x80 /* Disable Oscillator */ + +/* + * RTC status register bits + */ +#define RTC_STAT_BIT_A1F 0x1 /* Alarm 1 flag */ +#define RTC_STAT_BIT_A2F 0x2 /* Alarm 2 flag */ +#define RTC_STAT_BIT_OSF 0x80 /* Oscillator stop flag */ + + +static uchar rtc_read (uchar reg); +static void rtc_write (uchar reg, uchar val); +static uchar bin2bcd (unsigned int n); +static unsigned bcd2bin (uchar c); + + +/* + * Get the current time from the RTC + */ +void rtc_get (struct rtc_time *tmp) +{ + uchar sec, min, hour, mday, wday, mon_cent, year, control, status; + + control = rtc_read (RTC_CTL_REG_ADDR); + status = rtc_read (RTC_STAT_REG_ADDR); + sec = rtc_read (RTC_SEC_REG_ADDR); + min = rtc_read (RTC_MIN_REG_ADDR); + hour = rtc_read (RTC_HR_REG_ADDR); + wday = rtc_read (RTC_DAY_REG_ADDR); + mday = rtc_read (RTC_DATE_REG_ADDR); + mon_cent = rtc_read (RTC_MON_REG_ADDR); + year = rtc_read (RTC_YR_REG_ADDR); + + DEBUGR ("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x " + "hr: %02x min: %02x sec: %02x control: %02x status: %02x\n", + year, mon_cent, mday, wday, hour, min, sec, control, status); + + if (status & RTC_STAT_BIT_OSF) { + printf ("### Warning: RTC oscillator has stopped\n"); + /* clear the OSF flag */ + rtc_write (RTC_STAT_REG_ADDR, + rtc_read (RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF); + } + + tmp->tm_sec = bcd2bin (sec & 0x7F); + tmp->tm_min = bcd2bin (min & 0x7F); + tmp->tm_hour = bcd2bin (hour & 0x3F); + tmp->tm_mday = bcd2bin (mday & 0x3F); + tmp->tm_mon = bcd2bin (mon_cent & 0x1F); + tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900); + tmp->tm_wday = bcd2bin ((wday - 1) & 0x07); + tmp->tm_yday = 0; + tmp->tm_isdst= 0; + + DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); +} + + +/* + * Set the RTC + */ +void rtc_set (struct rtc_time *tmp) +{ + uchar century; + + DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); + + rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100)); + + century = (tmp->tm_year >= 2000) ? 0x80 : 0; + rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon) | century); + + rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1)); + rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday)); + rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour)); + rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min)); + rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec)); +} + + +/* + * Reset the RTC. We also enable the oscillator output on the + * SQW/INTB* pin and program it for 32,768 Hz output. Note that + * according to the datasheet, turning on the square wave output + * increases the current drain on the backup battery from about + * 600 nA to 2uA. + */ +void rtc_reset (void) +{ + rtc_write (RTC_CTL_REG_ADDR, RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2); +} + + +/* + * Helper functions + */ + +static +uchar rtc_read (uchar reg) +{ + return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg)); +} + + +static void rtc_write (uchar reg, uchar val) +{ + i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val); +} + +static unsigned bcd2bin (uchar n) +{ + return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); +} + +static unsigned char bin2bcd (unsigned int n) +{ + return (((n / 10) << 4) | (n % 10)); +} + +#endif /* (CONFIG_RTC_DS3231) && (CONFIG_COMMANDS & CFG_CMD_DATE) */ |
