diff options
| -rw-r--r-- | board/sunxi/Kconfig | 12 | ||||
| -rw-r--r-- | include/configs/sunxi-common.h | 3 | ||||
| -rwxr-xr-x | scripts/multiconfig.sh | 2 |
3 files changed, 16 insertions, 1 deletions
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 9bb593aed0..40adcfb401 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -177,6 +177,18 @@ config SPL_FEL depends on SPL default n +config UART0_PORT_F + bool "UART0 on MicroSD breakout board" + depends on SPL_FEL + default n + ---help--- + Repurpose the SD card slot for getting access to the UART0 serial + console. Primarily useful only for low level u-boot debugging on + tablets, where normal UART0 is difficult to access and requires + device disassembly and/or soldering. As the SD card can't be used + at the same time, the system can be only booted in the FEL mode. + Only enable this if you really know what you are doing. + config FDTFILE string "Default fdtfile env setting for this board" diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 3f890b2fb0..f7e87a2c37 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -160,7 +160,10 @@ #define CONFIG_SPL_MAX_SIZE 0x5fe0 /* 24KB on sun4i/sun7i */ #define CONFIG_SPL_LIBDISK_SUPPORT + +#if !defined(CONFIG_UART0_PORT_F) #define CONFIG_SPL_MMC_SUPPORT +#endif #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" diff --git a/scripts/multiconfig.sh b/scripts/multiconfig.sh index 70f3a5df6f..366e8faaa6 100755 --- a/scripts/multiconfig.sh +++ b/scripts/multiconfig.sh @@ -168,7 +168,7 @@ do_board_felconfig () { echo "$progname: Cannot felconfig a non-sunxi or non-SPL platform" >&2 exit 1 fi - sed -i -e 's/\# CONFIG_SPL_FEL is not set/CONFIG_SPL_FEL=y/g' \ + sed -i -e 's/\# CONFIG_SPL_FEL is not set/CONFIG_SPL_FEL=y\nCONFIG_UART0_PORT_F=n/g' \ .config spl/.config } |
