diff options
| -rw-r--r-- | drivers/net/kirkwood_egiga.c | 9 |
1 files changed, 5 insertions, 4 deletions
diff --git a/drivers/net/kirkwood_egiga.c b/drivers/net/kirkwood_egiga.c index 25c72df9cb..dd711e4a10 100644 --- a/drivers/net/kirkwood_egiga.c +++ b/drivers/net/kirkwood_egiga.c @@ -424,8 +424,6 @@ static int kwgbe_init(struct eth_device *dev) KWGBEREG_WR(regs->pxc, PRT_CFG_VAL); KWGBEREG_WR(regs->pxcx, PORT_CFG_EXTEND_VALUE); KWGBEREG_WR(regs->psc0, PORT_SERIAL_CONTROL_VALUE); - /* Disable port initially */ - KWGBEREG_BITS_SET(regs->psc0, KWGBE_SERIAL_PORT_EN); /* Assign port SDMA configuration */ KWGBEREG_WR(regs->sdc, PORT_SDMA_CFG_VALUE); @@ -438,6 +436,9 @@ static int kwgbe_init(struct eth_device *dev) KWGBEREG_WR(regs->psc0, KWGBE_MAX_RX_PACKET_9700BYTE | (KWGBEREG_RD(regs->psc0) & MRU_MASK)); + /* Enable port initially */ + KWGBEREG_BITS_SET(regs->psc0, KWGBE_SERIAL_PORT_EN); + /* * Set ethernet MTU for leaky bucket mechanism to 0 - this will * disable the leaky bucket mechanism . @@ -480,7 +481,7 @@ static int kwgbe_halt(struct eth_device *dev) stop_queue(®s->tqc); stop_queue(®s->rqc); - /* Enable port */ + /* Disable port */ KWGBEREG_BITS_RESET(regs->psc0, KWGBE_SERIAL_PORT_EN); /* Set port is not reset */ KWGBEREG_BITS_RESET(regs->psc1, 1 << 4); @@ -525,7 +526,7 @@ static int kwgbe_send(struct eth_device *dev, volatile void *dataptr, p_txdesc->buf_ptr = (u8 *) p; p_txdesc->byte_cnt = datasize; - /* Apply send command using zeroth RXUQ */ + /* Apply send command using zeroth TXUQ */ KWGBEREG_WR(regs->tcqdp[TXUQ], (u32) p_txdesc); KWGBEREG_WR(regs->tqc, (1 << TXUQ)); |
