diff options
| -rw-r--r-- | board/amcc/sequoia/sequoia.c | 2 | ||||
| -rw-r--r-- | common/cmd_reginfo.c | 5 | ||||
| -rw-r--r-- | cpu/ppc4xx/4xx_enet.c | 408 | ||||
| -rw-r--r-- | cpu/ppc4xx/interrupts.c | 75 | ||||
| -rw-r--r-- | cpu/ppc4xx/usbdev.c | 2 | ||||
| -rw-r--r-- | include/asm-ppc/ppc4xx-uic.h | 648 | ||||
| -rw-r--r-- | include/configs/HH405.h | 2 | ||||
| -rw-r--r-- | include/ppc405.h | 247 | ||||
| -rw-r--r-- | include/ppc440.h | 708 |
9 files changed, 397 insertions, 1700 deletions
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 87f5d5d6c1..d7d2aa2fcf 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -334,7 +334,7 @@ int checkboard(void) */ void sequoia_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { - pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIR2); + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIRQ2); } #endif diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c index 0657e4b1f1..c0a145991d 100644 --- a/common/cmd_reginfo.c +++ b/common/cmd_reginfo.c @@ -93,11 +93,10 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #elif defined (CONFIG_405GP) printf ("\n405GP registers; MSR=%08x\n",mfmsr()); printf ("\nUniversal Interrupt Controller Regs\n" - "uicsr uicsrs uicer uiccr uicpr uictr uicmsr uicvr uicvcr" + "uicsr uicer uiccr uicpr uictr uicmsr uicvr uicvcr" "\n" - "%08x %08x %08x %08x %08x %08x %08x %08x %08x\n", + "%08x %08x %08x %08x %08x %08x %08x %08x\n", mfdcr(uicsr), - mfdcr(uicsrs), mfdcr(uicer), mfdcr(uiccr), mfdcr(uicpr), diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index 47d8abc177..01712b056e 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -121,11 +121,62 @@ * Defines for MAL/EMAC interrupt conditions as reported in the UIC (Universal * Interrupt Controller). *-----------------------------------------------------------------------------*/ -#define MAL_UIC_ERR ( UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE) -#define MAL_UIC_DEF (UIC_MAL_RXEOB | MAL_UIC_ERR) -#define EMAC_UIC_DEF UIC_ENET -#define EMAC_UIC_DEF1 UIC_ENET1 -#define SEL_UIC_DEF(p) (p ? UIC_ENET1 : UIC_ENET ) +#define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev) * VECNUM_ETH1_OFFS)) + +#if defined(CONFIG_HAS_ETH3) +#if !defined(CONFIG_440GX) +#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)) || \ + UIC_MASK(ETH_IRQ_NUM(2)) || UIC_MASK(ETH_IRQ_NUM(3))) +#else +/* Unfortunately 440GX spreads EMAC interrupts on multiple UIC's */ +#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1))) +#define UIC_ETHxB (UIC_MASK(ETH_IRQ_NUM(2)) || UIC_MASK(ETH_IRQ_NUM(3))) +#endif /* !defined(CONFIG_440GX) */ +#elif defined(CONFIG_HAS_ETH2) +#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1)) || \ + UIC_MASK(ETH_IRQ_NUM(2))) +#elif defined(CONFIG_HAS_ETH1) +#define UIC_ETHx (UIC_MASK(ETH_IRQ_NUM(0)) || UIC_MASK(ETH_IRQ_NUM(1))) +#else +#define UIC_ETHx UIC_MASK(ETH_IRQ_NUM(0)) +#endif + +/* + * Define a default version for UIC_ETHxB for non 440GX so that we can + * use common code for all 4xx variants + */ +#if !defined(UIC_ETHxB) +#define UIC_ETHxB 0 +#endif + +#define UIC_MAL_SERR UIC_MASK(VECNUM_MAL_SERR) +#define UIC_MAL_TXDE UIC_MASK(VECNUM_MAL_TXDE) +#define UIC_MAL_RXDE UIC_MASK(VECNUM_MAL_RXDE) +#define UIC_MAL_TXEOB UIC_MASK(VECNUM_MAL_TXEOB) +#define UIC_MAL_RXEOB UIC_MASK(VECNUM_MAL_RXEOB) + +#define MAL_UIC_ERR (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE) +#define MAL_UIC_DEF (UIC_MAL_RXEOB | MAL_UIC_ERR) + +/* + * We have 3 different interrupt types: + * - MAL interrupts indicating successful transfer + * - MAL error interrupts indicating MAL related errors + * - EMAC interrupts indicating EMAC related errors + * + * All those interrupts can be on different UIC's, but since + * now at least all interrupts from one type are on the same + * UIC. Only exception is 440GX where the EMAC interrupts are + * spread over two UIC's! + */ +#define UIC_BASE_MAL (UIC0_DCR_BASE + (UIC_NR(VECNUM_MAL_TXEOB) * 0x10)) +#define UIC_BASE_MAL_ERR (UIC0_DCR_BASE + (UIC_NR(VECNUM_MAL_SERR) * 0x10)) +#define UIC_BASE_EMAC (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(0)) * 0x10)) +#if defined(CONFIG_440GX) +#define UIC_BASE_EMAC_B (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(2)) * 0x10)) +#else +#define UIC_BASE_EMAC_B (UIC0_DCR_BASE + (UIC_NR(ETH_IRQ_NUM(0)) * 0x10)) +#endif #undef INFO_4XX_ENET @@ -165,9 +216,6 @@ /*-----------------------------------------------------------------------------+ * Global variables. TX and RX descriptors and buffers. *-----------------------------------------------------------------------------*/ -/* IER globals */ -static uint32_t mal_ier; - #if !defined(CONFIG_NET_MULTI) struct eth_device *emac0_dev = NULL; #endif @@ -199,12 +247,6 @@ struct eth_device *emac0_dev = NULL; #define CONFIG_EMAC_NR_START 0 #endif -#if defined(CONFIG_405EX) || defined(CONFIG_440EPX) -#define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev))) -#else -#define ETH_IRQ_NUM(dev) (VECNUM_ETH0 + ((dev) * 2)) -#endif - #define MAL_RX_DESC_SIZE 2048 #define MAL_TX_DESC_SIZE 2048 #define MAL_ALLOC_SIZE (MAL_TX_DESC_SIZE + MAL_RX_DESC_SIZE) @@ -1434,59 +1476,17 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr, } } - -#if defined (CONFIG_440) || defined(CONFIG_405EX) - -#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) -/* - * Hack: On 440SP all enet irq sources are located on UIC1 - * Needs some cleanup. --sr - */ -#define UIC0MSR uic1msr -#define UIC0SR uic1sr -#define UIC1MSR uic1msr -#define UIC1SR uic1sr -#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) -/* - * Hack: On 460EX/GT all enet irq sources are located on UIC2 - * Needs some cleanup. --ag - */ -#define UIC0MSR uic2msr -#define UIC0SR uic2sr -#define UIC1MSR uic2msr -#define UIC1SR uic2sr -#else -#define UIC0MSR uic0msr -#define UIC0SR uic0sr -#define UIC1MSR uic1msr -#define UIC1SR uic1sr -#endif - -#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_405EX) -#define UICMSR_ETHX uic0msr -#define UICSR_ETHX uic0sr -#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) -#define UICMSR_ETHX uic2msr -#define UICSR_ETHX uic2sr -#else -#define UICMSR_ETHX uic1msr -#define UICSR_ETHX uic1sr -#endif - int enetInt (struct eth_device *dev) { int serviced; int rc = -1; /* default to not us */ - unsigned long mal_isr; - unsigned long emac_isr = 0; - unsigned long mal_rx_eob; - unsigned long my_uic0msr, my_uic1msr; - unsigned long my_uicmsr_ethx; - -#if defined(CONFIG_440GX) - unsigned long my_uic2msr; -#endif + u32 mal_isr; + u32 emac_isr = 0; + u32 mal_eob; + u32 uic_mal; + u32 uic_mal_err; + u32 uic_emac; + u32 uic_emac_b; EMAC_4XX_HW_PST hw_p; /* @@ -1505,256 +1505,79 @@ int enetInt (struct eth_device *dev) do { serviced = 0; - my_uic0msr = mfdcr (UIC0MSR); - my_uic1msr = mfdcr (UIC1MSR); -#if defined(CONFIG_440GX) - my_uic2msr = mfdcr (uic2msr); -#endif - my_uicmsr_ethx = mfdcr (UICMSR_ETHX); + uic_mal = mfdcr(UIC_BASE_MAL + UIC_MSR); + uic_mal_err = mfdcr(UIC_BASE_MAL_ERR + UIC_MSR); + uic_emac = mfdcr(UIC_BASE_EMAC + UIC_MSR); + uic_emac_b = mfdcr(UIC_BASE_EMAC_B + UIC_MSR); - if (!(my_uic0msr & (UIC_MRE | UIC_MTE)) - && !(my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) - && !(my_uicmsr_ethx & (UIC_ETH0 | UIC_ETH1))) { - /* not for us */ - return (rc); - } -#if defined (CONFIG_440GX) - if (!(my_uic0msr & (UIC_MRE | UIC_MTE)) - && !(my_uic2msr & (UIC_ETH2 | UIC_ETH3))) { + if (!(uic_mal & (UIC_MAL_RXEOB | UIC_MAL_TXEOB)) + && !(uic_mal_err & (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)) + && !(uic_emac & UIC_ETHx) && !(uic_emac_b & UIC_ETHxB)) { /* not for us */ return (rc); } -#endif + /* get and clear controller status interrupts */ - /* look at Mal and EMAC interrupts */ - if ((my_uic0msr & (UIC_MRE | UIC_MTE)) - || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { - /* we have a MAL interrupt */ - mal_isr = mfdcr (malesr); - /* look for mal error */ - if (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE)) { - mal_err (dev, mal_isr, my_uic1msr, MAL_UIC_DEF, MAL_UIC_ERR); - serviced = 1; - rc = 0; - } - } + /* look at MAL and EMAC error interrupts */ + if (uic_mal_err & (UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE)) { + /* we have a MAL error interrupt */ + mal_isr = mfdcr(malesr); + mal_err(dev, mal_isr, uic_mal_err, + MAL_UIC_DEF, MAL_UIC_ERR); - /* port by port dispatch of emac interrupts */ - if (hw_p->devnum == 0) { - if (UIC_ETH0 & my_uicmsr_ethx) { /* look for EMAC errors */ - emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); - if ((hw_p->emac_ier & emac_isr) != 0) { - emac_err (dev, emac_isr); - serviced = 1; - rc = 0; - } - } - if ((hw_p->emac_ier & emac_isr) - || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { - mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */ - mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ - mtdcr (UICSR_ETHX, UIC_ETH0); /* Clear */ - return (rc); /* we had errors so get out */ - } - } + /* clear MAL error interrupt status bits */ + mtdcr(UIC_BASE_MAL_ERR + UIC_SR, + UIC_MAL_SERR | UIC_MAL_TXDE | UIC_MAL_RXDE); -#if !defined(CONFIG_440SP) - if (hw_p->devnum == 1) { - if (UIC_ETH1 & my_uicmsr_ethx) { /* look for EMAC errors */ - emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); - if ((hw_p->emac_ier & emac_isr) != 0) { - emac_err (dev, emac_isr); - serviced = 1; - rc = 0; - } - } - if ((hw_p->emac_ier & emac_isr) - || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { - mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */ - mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ - mtdcr (UICSR_ETHX, UIC_ETH1); /* Clear */ - return (rc); /* we had errors so get out */ - } - } -#if defined (CONFIG_440GX) - if (hw_p->devnum == 2) { - if (UIC_ETH2 & my_uic2msr) { /* look for EMAC errors */ - emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); - if ((hw_p->emac_ier & emac_isr) != 0) { - emac_err (dev, emac_isr); - serviced = 1; - rc = 0; - } - } - if ((hw_p->emac_ier & emac_isr) - || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { - mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */ - mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ - mtdcr (uic2sr, UIC_ETH2); - return (rc); /* we had errors so get out */ - } + return -1; } - if (hw_p->devnum == 3) { - if (UIC_ETH3 & my_uic2msr) { /* look for EMAC errors */ - emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); - if ((hw_p->emac_ier & emac_isr) != 0) { - emac_err (dev, emac_isr); - serviced = 1; - rc = 0; - } - } - if ((hw_p->emac_ier & emac_isr) - || (my_uic1msr & (UIC_MS | UIC_MTDE | UIC_MRDE))) { - mtdcr (UIC0SR, UIC_MRE | UIC_MTE); /* Clear */ - mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ - mtdcr (uic2sr, UIC_ETH3); - return (rc); /* we had errors so get out */ - } - } -#endif /* CONFIG_440GX */ -#endif /* !CONFIG_440SP */ + /* look for EMAC errors */ + if ((uic_emac & UIC_ETHx) || (uic_emac_b & UIC_ETHxB)) { + emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); + emac_err(dev, emac_isr); - /* handle MAX TX EOB interrupt from a tx */ - if (my_uic0msr & UIC_MTE) { - mal_rx_eob = mfdcr (maltxeobisr); - mtdcr (maltxeobisr, mal_rx_eob); - mtdcr (UIC0SR, UIC_MTE); - } - /* handle MAL RX EOB interupt from a receive */ - /* check for EOB on valid channels */ - if (my_uic0msr & UIC_MRE) { - mal_rx_eob = mfdcr (malrxeobisr); - if ((mal_rx_eob & - (0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL))) - != 0) { /* call emac routine for channel x */ - /* clear EOB - mtdcr(malrxeobisr, mal_rx_eob); */ - enet_rcv (dev, emac_isr); - /* indicate that we serviced an interrupt */ - serviced = 1; - rc = 0; - } - } + /* clear EMAC error interrupt status bits */ + mtdcr(UIC_BASE_EMAC + UIC_SR, UIC_ETHx); + mtdcr(UIC_BASE_EMAC_B + UIC_SR, UIC_ETHxB); - mtdcr (UIC0SR, UIC_MRE); /* Clear */ - mtdcr (UIC1SR, UIC_MS | UIC_MTDE | UIC_MRDE); /* Clear */ - switch (hw_p->devnum) { - case 0: - mtdcr (UICSR_ETHX, UIC_ETH0); - break; - case 1: - mtdcr (UICSR_ETHX, UIC_ETH1); - break; -#if defined (CONFIG_440GX) - case 2: - mtdcr (uic2sr, UIC_ETH2); - break; - case 3: - mtdcr (uic2sr, UIC_ETH3); - break; -#endif /* CONFIG_440GX */ - default: - break; + return -1; } - } while (serviced); - - return (rc); -} - -#else /* CONFIG_440 */ - -int enetInt (struct eth_device *dev) -{ - int serviced; - int rc = -1; /* default to not us */ - unsigned long mal_isr; - unsigned long emac_isr = 0; - unsigned long mal_rx_eob; - unsigned long my_uicmsr; - - EMAC_4XX_HW_PST hw_p; - - /* - * Because the mal is generic, we need to get the current - * eth device - */ -#if defined(CONFIG_NET_MULTI) - dev = eth_get_dev(); -#else - dev = emac0_dev; -#endif - hw_p = dev->priv; - - /* enter loop that stays in interrupt code until nothing to service */ - do { - serviced = 0; - - my_uicmsr = mfdcr (uicmsr); - - if ((my_uicmsr & (MAL_UIC_DEF | EMAC_UIC_DEF)) == 0) { /* not for us */ - return (rc); - } - /* get and clear controller status interrupts */ - /* look at Mal and EMAC interrupts */ - if ((MAL_UIC_DEF & my_uicmsr) != 0) { /* we have a MAL interrupt */ - mal_isr = mfdcr (malesr); - /* look for mal error */ - if ((my_uicmsr & MAL_UIC_ERR) != 0) { - mal_err (dev, mal_isr, my_uicmsr, MAL_UIC_DEF, MAL_UIC_ERR); - serviced = 1; - rc = 0; - } + /* handle MAX TX EOB interrupt from a tx */ + if (uic_mal & UIC_MAL_TXEOB) { + /* clear MAL interrupt status bits */ + mal_eob = mfdcr(maltxeobisr); + mtdcr(maltxeobisr, mal_eob); + mtdcr(UIC_BASE_MAL + UIC_SR, UIC_MAL_TXEOB); + + /* indicate that we serviced an interrupt */ + serviced = 1; + rc = 0; } - /* port by port dispatch of emac interrupts */ + /* handle MAL RX EOB interupt from a receive */ + /* check for EOB on valid channels */ + if (uic_mal & UIC_MAL_RXEOB) { + mal_eob = mfdcr(malrxeobisr); + if (mal_eob & + (0x80000000 >> (hw_p->devnum * MAL_RX_CHAN_MUL))) { + /* push packet to upper layer */ + enet_rcv(dev, emac_isr); - if ((SEL_UIC_DEF(hw_p->devnum) & my_uicmsr) != 0) { /* look for EMAC errors */ - emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); - if ((hw_p->emac_ier & emac_isr) != 0) { - emac_err (dev, emac_isr); - serviced = 1; - rc = 0; - } - } - if (((hw_p->emac_ier & emac_isr) != 0) || ((MAL_UIC_ERR & my_uicmsr) != 0)) { - mtdcr (uicsr, MAL_UIC_DEF | SEL_UIC_DEF(hw_p->devnum)); /* Clear */ - return (rc); /* we had errors so get out */ - } + /* clear MAL interrupt status bits */ + mtdcr(UIC_BASE_MAL + UIC_SR, UIC_MAL_RXEOB); - /* handle MAX TX EOB interrupt from a tx */ - if (my_uicmsr & UIC_MAL_TXEOB) { - mal_rx_eob = mfdcr (maltxeobisr); - mtdcr (maltxeobisr, mal_rx_eob); - mtdcr (uicsr, UIC_MAL_TXEOB); - } - /* handle MAL RX EOB interupt from a receive */ - /* check for EOB on valid channels */ - if (my_uicmsr & UIC_MAL_RXEOB) - { - mal_rx_eob = mfdcr (malrxeobisr); - if ((mal_rx_eob & (0x80000000 >> hw_p->devnum)) != 0) { /* call emac routine for channel x */ - /* clear EOB - mtdcr(malrxeobisr, mal_rx_eob); */ - enet_rcv (dev, emac_isr); /* indicate that we serviced an interrupt */ serviced = 1; rc = 0; } } - mtdcr (uicsr, MAL_UIC_DEF|EMAC_UIC_DEF|EMAC_UIC_DEF1); /* Clear */ -#if defined(CONFIG_405EZ) - mtsdr (sdricintstat, SDR_ICRX_STAT | SDR_ICTX0_STAT | SDR_ICTX1_STAT); -#endif /* defined(CONFIG_405EZ) */ - } - while (serviced); + } while (serviced); return (rc); } -#endif /* CONFIG_440 */ - /*-----------------------------------------------------------------------------+ * MAL Error Routine *-----------------------------------------------------------------------------*/ @@ -1940,6 +1763,7 @@ int ppc_4xx_eth_initialize (bd_t * bis) EMAC_4XX_HW_PST hw = NULL; u8 ethaddr[4 + CONFIG_EMAC_NR_START][6]; u32 hw_addr[4]; + u32 mal_ier; #if defined(CONFIG_440GX) unsigned long pfc1; @@ -2077,19 +1901,19 @@ int ppc_4xx_eth_initialize (bd_t * bis) mtdcr (malier, mal_ier); /* install MAL interrupt handler */ - irq_install_handler (VECNUM_MS, + irq_install_handler (VECNUM_MAL_SERR, (interrupt_handler_t *) enetInt, dev); - irq_install_handler (VECNUM_MTE, + irq_install_handler (VECNUM_MAL_TXEOB, (interrupt_handler_t *) enetInt, dev); - irq_install_handler (VECNUM_MRE, + irq_install_handler (VECNUM_MAL_RXEOB, (interrupt_handler_t *) enetInt, dev); - irq_install_handler (VECNUM_TXDE, + irq_install_handler (VECNUM_MAL_TXDE, (interrupt_handler_t *) enetInt, dev); - irq_install_handler (VECNUM_RXDE, + irq_install_handler (VECNUM_MAL_RXDE, (interrupt_handler_t *) enetInt, dev); virgin = 1; diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c index eb9cb1d397..6dbd6d2819 100644 --- a/cpu/ppc4xx/interrupts.c +++ b/cpu/ppc4xx/interrupts.c @@ -35,25 +35,27 @@ #include <ppc_asm.tmpl> #include <commproc.h> -DECLARE_GLOBAL_DATA_PTR; - -/* - * Define the number of UIC's - */ -#if defined(CONFIG_440SPE) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) -#define UIC_MAX 4 -#elif defined(CONFIG_440GX) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_405EX) -#define UIC_MAX 3 -#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \ - defined(CONFIG_440EP) || defined(CONFIG_440GR) -#define UIC_MAX 2 +#if (UIC_MAX > 3) +#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \ + UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI) | \ + UIC_MASK(VECNUM_UIC3CI) | UIC_MASK(VECNUM_UIC3NCI)) +#elif (UIC_MAX > 2) +#if defined(CONFIG_440GX) +#define UICB0_ALL (UIC_MASK(VECNUM_UIC0CI) | UIC_MASK(VECNUM_UIC0NCI) | \ + UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \ + UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI)) +#else +#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \ + UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI)) +#endif +#elif (UIC_MAX > 1) +#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI)) #else -#define UIC_MAX 1 +#define UICB0_ALL 0 #endif +DECLARE_GLOBAL_DATA_PTR; + /* * CPM interrupt vector functions. */ @@ -158,18 +160,23 @@ int interrupt_init_cpu (unsigned *decrementer_count) #if !defined(CONFIG_440GX) #if (UIC_MAX > 1) /* Install the UIC1 handlers */ - irq_install_handler(VECNUM_UIC1NC, uic_cascade_interrupt, 0); - irq_install_handler(VECNUM_UIC1C, uic_cascade_interrupt, 0); + irq_install_handler(VECNUM_UIC1NCI, uic_cascade_interrupt, 0); + irq_install_handler(VECNUM_UIC1CI, uic_cascade_interrupt, 0); #endif #if (UIC_MAX > 2) - irq_install_handler(VECNUM_UIC2NC, uic_cascade_interrupt, 0); - irq_install_handler(VECNUM_UIC2C, uic_cascade_interrupt, 0); + irq_install_handler(VECNUM_UIC2NCI, uic_cascade_interrupt, 0); + irq_install_handler(VECNUM_UIC2CI, uic_cascade_interrupt, 0); #endif #if (UIC_MAX > 3) - irq_install_handler(VECNUM_UIC3NC, uic_cascade_interrupt, 0); - irq_install_handler(VECNUM_UIC3C, uic_cascade_interrupt, 0); + irq_install_handler(VECNUM_UIC3NCI, uic_cascade_interrupt, 0); + irq_install_handler(VECNUM_UIC3CI, uic_cascade_interrupt, 0); #endif #else /* !defined(CONFIG_440GX) */ + /* + * ToDo: Remove this 440GX special handling: + * Move SDR0_MFR setup to cpu.c and use common code with UICB0 + * on 440GX. 2008-06-26, sr + */ /* Take the GX out of compatibility mode * Travis Sawyer, 9 Mar 2004 * NOTE: 440gx user manual inconsistency here @@ -182,7 +189,7 @@ int interrupt_init_cpu (unsigned *decrementer_count) /* Enable UIC interrupts via UIC Base Enable Register */ mtdcr(uicb0sr, UICB0_ALL); - mtdcr(uicb0er, 0x54000000); + mtdcr(uicb0er, UICB0_ALL); /* None are critical */ mtdcr(uicb0cr, 0); #endif /* !defined(CONFIG_440GX) */ @@ -216,8 +223,7 @@ static void uic_interrupt(u32 uic_base, int vec_base) (*irq_vecs[vec].handler)(irq_vecs[vec].arg); } else { set_dcr(uic_base + UIC_ER, - get_dcr(uic_base + UIC_ER) & - ~(0x80000000 >> (vec & 0x1f))); + get_dcr(uic_base + UIC_ER) & ~UIC_MASK(vec)); printf("Masking bogus interrupt vector %d" " (UIC_BASE=0x%x)\n", vec, uic_base); } @@ -226,7 +232,7 @@ static void uic_interrupt(u32 uic_base, int vec_base) * After servicing the interrupt, we have to remove the * status indicator */ - set_dcr(uic_base + UIC_SR, (0x80000000 >> (vec & 0x1f))); + set_dcr(uic_base + UIC_SR, UIC_MASK(vec)); } /* @@ -244,7 +250,6 @@ static void uic_cascade_interrupt(void *para) } #endif -#if defined(CONFIG_440) #if defined(CONFIG_440GX) /* 440GX uses base uic register */ #define UIC_BMSR uicb0msr @@ -253,10 +258,6 @@ static void uic_cascade_interrupt(void *para) #define UIC_BMSR uic0msr #define UIC_BSR uic0sr #endif -#else /* CONFIG_440 */ -#define UIC_BMSR uicmsr -#define UIC_BSR uicsr -#endif /* CONFIG_440 */ /* * Handle external interrupts @@ -271,17 +272,20 @@ void external_interrupt(struct pt_regs *regs) uic_msr = mfdcr(UIC_BMSR); #if (UIC_MAX > 1) - if ((UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr)) + if ((UIC_MASK(VECNUM_UIC1CI) & uic_msr) || + (UIC_MASK(VECNUM_UIC1NCI) & uic_msr)) uic_interrupt(UIC1_DCR_BASE, 32); #endif #if (UIC_MAX > 2) - if ((UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr)) + if ((UIC_MASK(VECNUM_UIC2CI) & uic_msr) || + (UIC_MASK(VECNUM_UIC2NCI) & uic_msr)) uic_interrupt(UIC2_DCR_BASE, 64); #endif #if (UIC_MAX > 3) - if ((UICB0_UIC3CI & uic_msr) || (UICB0_UIC3NCI & uic_msr)) + if ((UIC_MASK(VECNUM_UIC3CI) & uic_msr) || + (UIC_MASK(VECNUM_UIC3NCI) & uic_msr)) uic_interrupt(UIC3_DCR_BASE, 96); #endif @@ -290,7 +294,8 @@ void external_interrupt(struct pt_regs *regs) if (uic_msr & ~(UICB0_ALL)) uic_interrupt(UIC0_DCR_BASE, 0); #else - if ((UICB0_UIC0CI & uic_msr) || (UICB0_UIC0NCI & uic_msr)) + if ((UIC_MASK(VECNUM_UIC0CI) & uic_msr) || + (UIC_MASK(VECNUM_UIC0NCI) & uic_msr)) uic_interrupt(UIC0_DCR_BASE, 0); #endif #else /* CONFIG_440 */ diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c index 27e6a4056c..faf7f0878f 100644 --- a/cpu/ppc4xx/usbdev.c +++ b/cpu/ppc4xx/usbdev.c @@ -197,7 +197,7 @@ void usb_dev_init() /*enable interrupts */ *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f; - irq_install_handler(VECNUM_HSB2D, (interrupt_handler_t *) usbInt, + irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt, NULL); } #else diff --git a/include/asm-ppc/ppc4xx-uic.h b/include/asm-ppc/ppc4xx-uic.h index 1573b1eab1..b596f0edfb 100644 --- a/include/asm-ppc/ppc4xx-uic.h +++ b/include/asm-ppc/ppc4xx-uic.h @@ -26,444 +26,268 @@ #ifndef _PPC4xx_UIC_H_ #define _PPC4xx_UIC_H_ -#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) - -/* UIC 0 */ -#define VECNUM_U0 0 /* UART 0 */ -#define VECNUM_U1 1 /* UART 1 */ -#define VECNUM_IIC0 2 /* IIC */ -#define VECNUM_KRD 3 /* Kasumi Ready for data */ -#define VECNUM_KDA 4 /* Kasumi Data Available */ -#define VECNUM_PCRW 5 /* PCI command register write */ -#define VECNUM_PPM 6 /* PCI power management */ -#define VECNUM_IIC1 7 /* IIC */ -#define VECNUM_SPI 8 /* SPI */ -#define VECNUM_EPCISER 9 /* External PCI SERR */ -#define VECNUM_MTE 10 /* MAL TXEOB */ -#define VECNUM_MRE 11 /* MAL RXEOB */ -#define VECNUM_D0 12 /* DMA channel 0 */ -#define VECNUM_D1 13 /* DMA channel 1 */ -#define VECNUM_D2 14 /* DMA channel 2 */ -#define VECNUM_D3 15 /* DMA channel 3 */ -#define VECNUM_UD0 16 /* UDMA irq 0 */ -#define VECNUM_UD1 17 /* UDMA irq 1 */ -#define VECNUM_UD2 18 /* UDMA irq 2 */ -#define VECNUM_UD3 19 /* UDMA irq 3 */ -#define VECNUM_HSB2D 20 /* USB2.0 Device */ -#define VECNUM_USBDEV 20 /* USB 1.1/USB 2.0 Device */ -#define VECNUM_OHCI1 21 /* USB2.0 Host OHCI irq 1 */ -#define VECNUM_OHCI2 22 /* USB2.0 Host OHCI irq 2 */ -#define VECNUM_EIP94 23 /* Security EIP94 */ -#define VECNUM_ETH0 24 /* Emac 0 */ -#define VECNUM_ETH1 25 /* Emac 1 */ -#define VECNUM_EHCI 26 /* USB2.0 Host EHCI */ -#define VECNUM_EIR4 27 /* External interrupt 4 */ -#define VECNUM_UIC2NC 28 /* UIC2 non-critical interrupt */ -#define VECNUM_UIC2C 29 /* UIC2 critical interrupt */ -#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ -#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ - -/* UIC 1 */ -#define VECNUM_MS (32 + 0) /* MAL SERR */ -#define VECNUM_MTDE (32 + 1) /* MAL TXDE */ -#define VECNUM_MRDE (32 + 2) /* MAL RXDE */ -#define VECNUM_U2 (32 + 3) /* UART 2 */ -#define VECNUM_U3 (32 + 4) /* UART 3 */ -#define VECNUM_EBCO (32 + 5) /* EBCO interrupt status */ -#define VECNUM_NDFC (32 + 6) /* NDFC */ -#define VECNUM_KSLE (32 + 7) /* KASUMI slave error */ -#define VECNUM_CT5 (32 + 8) /* GPT compare timer 5 */ -#define VECNUM_CT6 (32 + 9) /* GPT compare timer 6 */ -#define VECNUM_PLB34I0 (32 + 10) /* PLB3X4X MIRQ0 */ -#define VECNUM_PLB34I1 (32 + 11) /* PLB3X4X MIRQ1 */ -#define VECNUM_PLB34I2 (32 + 12) /* PLB3X4X MIRQ2 */ -#define VECNUM_PLB34I3 (32 + 13) /* PLB3X4X MIRQ3 */ -#define VECNUM_PLB34I4 (32 + 14) /* PLB3X4X MIRQ4 */ -#define VECNUM_PLB34I5 (32 + 15) /* PLB3X4X MIRQ5 */ -#define VECNUM_CT0 (32 + 16) /* GPT compare timer 0 */ -#define VECNUM_CT1 (32 + 17) /* GPT compare timer 1 */ -#define VECNUM_EIR7 (32 + 18) /* External interrupt 7 */ -#define VECNUM_EIR8 (32 + 19) /* External interrupt 8 */ -#define VECNUM_EIR9 (32 + 20) /* External interrupt 9 */ -#define VECNUM_CT2 (32 + 21) /* GPT compare timer 2 */ -#define VECNUM_CT3 (32 + 22) /* GPT compare timer 3 */ -#define VECNUM_CT4 (32 + 23) /* GPT compare timer 4 */ -#define VECNUM_SRE (32 + 24) /* Serial ROM error */ -#define VECNUM_GPTDC (32 + 25) /* GPT decrementer pulse */ -#define VECNUM_RSVD0 (32 + 26) /* Reserved */ -#define VECNUM_EPCIPER (32 + 27) /* External PCI PERR */ -#define VECNUM_EIR0 (32 + 28) /* External interrupt 0 */ -#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */ -#define VECNUM_EIR1 (32 + 30) /* External interrupt 1 */ -#define VECNUM_EWU1 (32 + 31) /* Ethernet 1 wakeup */ +/* + * Define the number of UIC's + */ +#if defined(CONFIG_440SPE) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) +#define UIC_MAX 4 +#elif defined(CONFIG_440GX) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_405EX) +#define UIC_MAX 3 +#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR) +#define UIC_MAX 2 +#else +#define UIC_MAX 1 +#endif -#define VECNUM_TXDE VECNUM_MTDE -#define VECNUM_RXDE VECNUM_MRDE +/* + * UIC register + */ +#define UIC_SR 0x0 /* UIC status */ +#define UIC_ER 0x2 /* UIC enable */ +#define UIC_CR 0x3 /* UIC critical */ +#define UIC_PR 0x4 /* UIC polarity */ +#define UIC_TR 0x5 /* UIC triggering */ +#define UIC_MSR 0x6 /* UIC masked status */ +#define UIC_VR 0x7 /* UIC vector */ +#define UIC_VCR 0x8 /* UIC vector configuration */ + +#define UIC0_DCR_BASE 0xc0 +#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */ +#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */ +#define uic0cr (UIC0_DCR_BASE+0x3) /* UIC0 critical */ +#define uic0pr (UIC0_DCR_BASE+0x4) /* UIC0 polarity */ +#define uic0tr (UIC0_DCR_BASE+0x5) /* UIC0 triggering */ +#define uic0msr (UIC0_DCR_BASE+0x6) /* UIC0 masked status */ +#define uic0vr (UIC0_DCR_BASE+0x7) /* UIC0 vector */ +#define uic0vcr (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */ + +#define UIC1_DCR_BASE 0xd0 +#define uic1sr (UIC1_DCR_BASE+0x0) /* UIC1 status */ +#define uic1er (UIC1_DCR_BASE+0x2) /* UIC1 enable */ +#define uic1cr (UIC1_DCR_BASE+0x3) /* UIC1 critical */ +#define uic1pr (UIC1_DCR_BASE+0x4) /* UIC1 polarity */ +#define uic1tr (UIC1_DCR_BASE+0x5) /* UIC1 triggering */ +#define uic1msr (UIC1_DCR_BASE+0x6) /* UIC1 masked status */ +#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */ +#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */ + +#if defined(CONFIG_440GX) +#define UIC2_DCR_BASE 0x210 +#else +#define UIC2_DCR_BASE 0xe0 +#endif +#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */ +#define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */ +#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */ +#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */ +#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */ +#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */ +#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */ +#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */ +#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */ + +#define UIC3_DCR_BASE 0xf0 +#define uic3sr (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */ +#define uic3srs (UIC3_DCR_BASE+0x1) /* UIC3 status-Read Set */ +#define uic3er (UIC3_DCR_BASE+0x2) /* UIC3 enable */ +#define uic3cr (UIC3_DCR_BASE+0x3) /* UIC3 critical */ +#define uic3pr (UIC3_DCR_BASE+0x4) /* UIC3 polarity */ +#define uic3tr (UIC3_DCR_BASE+0x5) /* UIC3 triggering */ +#define uic3msr (UIC3_DCR_BASE+0x6) /* UIC3 masked status */ +#define uic3vr (UIC3_DCR_BASE+0x7) /* UIC3 vector */ +#define uic3vcr (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */ + +#if defined(CONFIG_440GX) +#define UIC_DCR_BASE 0x200 +#define uicb0sr (UIC_DCR_BASE+0x0) /* UIC Base Status Register */ +#define uicb0er (UIC_DCR_BASE+0x2) /* UIC Base enable */ +#define uicb0cr (UIC_DCR_BASE+0x3) /* UIC Base critical */ +#define uicb0pr (UIC_DCR_BASE+0x4) /* UIC Base polarity */ +#define uicb0tr (UIC_DCR_BASE+0x5) /* UIC Base triggering */ +#define uicb0msr (UIC_DCR_BASE+0x6) /* UIC Base masked status */ +#define uicb0vr (UIC_DCR_BASE+0x7) /* UIC Base vector */ +#define uicb0vcr (UIC_DCR_BASE+0x8) /* UIC Base vector configuration*/ +#endif /* CONFIG_440GX */ + +/* The following is for compatibility with 405 code */ +#define uicsr uic0sr +#define uicer uic0er +#define uiccr uic0cr +#define uicpr uic0pr +#define uictr uic0tr +#define uicmsr uic0msr +#define uicvr uic0vr +#define uicvcr uic0vcr -/* UIC 2 */ -#define VECNUM_EIR5 (64 + 0) /* External interrupt 5 */ -#define VECNUM_EIR6 (64 + 1) /* External interrupt 6 */ -#define VECNUM_OPB (64 + 2) /* OPB to PLB bridge int stat */ -#define VECNUM_EIR2 (64 + 3) /* External interrupt 2 */ -#define VECNUM_EIR3 (64 + 4) /* External interrupt 3 */ -#define VECNUM_DDR2 (64 + 5) /* DDR2 sdram */ -#define VECNUM_MCTX0 (64 + 6) /* MAl intp coalescence TX0 */ -#define VECNUM_MCTX1 (64 + 7) /* MAl intp coalescence TX1 */ -#define VECNUM_MCTR0 (64 + 8) /* MAl intp coalescence TR0 */ -#define VECNUM_MCTR1 (64 + 9) /* MAl intp coalescence TR1 */ +/* + * Now the interrupt vector definitions. They are different for most of + * the 4xx variants, so we need some more #ifdef's here. No mask + * definitions anymore here. For this please use the UIC_MASK macro below. + * + * Note: Please only define the interrupts really used in U-Boot here. + * Those are the cascading and EMAC/MAL related interrupt. + */ -#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) +#if defined(CONFIG_405EP) || defined(CONFIG_405GP) +#define VECNUM_MAL_SERR 10 +#define VECNUM_MAL_TXEOB 11 +#define VECNUM_MAL_RXEOB 12 +#define VECNUM_MAL_TXDE 13 +#define VECNUM_MAL_RXDE 14 +#define VECNUM_ETH0 15 +#define VECNUM_ETH1_OFFS 2 +#define VECNUM_EIRQ6 29 +#endif /* defined(CONFIG_405EP) */ +#if defined(CONFIG_405EZ) +#define VECNUM_USBDEV 15 +#define VECNUM_ETH0 16 +#define VECNUM_MAL_SERR 18 +#define VECNUM_MAL_TXDE 18 +#define VECNUM_MAL_RXDE 18 +#define VECNUM_MAL_TXEOB 19 +#define VECNUM_MAL_RXEOB 21 +#endif /* CONFIG_405EX */ + +#if defined(CONFIG_405EX) /* UIC 0 */ -#define VECNUM_U1 1 /* UART1 */ -#define VECNUM_IIC0 2 /* IIC0 */ -#define VECNUM_IIC1 3 /* IIC1 */ -#define VECNUM_PIM 4 /* PCI inbound message */ -#define VECNUM_PCRW 5 /* PCI command reg write */ -#define VECNUM_PPM 6 /* PCI power management */ -#define VECNUM_MSI0 8 /* PCI MSI level 0 */ -#define VECNUM_EIR0 9 /* External interrupt 0 */ -#define VECNUM_UIC2NC 10 /* UIC2 non-critical interrupt */ -#define VECNUM_UIC2C 11 /* UIC2 critical interrupt */ -#define VECNUM_D0 12 /* DMA channel 0 */ -#define VECNUM_D1 13 /* DMA channel 1 */ -#define VECNUM_D2 14 /* DMA channel 2 */ -#define VECNUM_D3 15 /* DMA channel 3 */ -#define VECNUM_UIC3NC 16 /* UIC3 non-critical interrupt */ -#define VECNUM_UIC3C 17 /* UIC3 critical interrupt */ -#define VECNUM_EIR1 9 /* External interrupt 1 */ -#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ -#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ +#define VECNUM_MAL_TXEOB 10 +#define VECNUM_MAL_RXEOB 11 +#define VECNUM_ETH0 24 +#define VECNUM_ETH1_OFFS 1 +#define VECNUM_UIC2NCI 28 +#define VECNUM_UIC2CI 29 +#define VECNUM_UIC1NCI 30 +#define VECNUM_UIC1CI 31 /* UIC 1 */ -#define VECNUM_EIR2 (32 + 0) /* External interrupt 0 */ -#define VECNUM_U0 (32 + 1) /* UART0 */ -#define VECNUM_EIR3 (32 + 20) /* External interrupt 3 */ -#define VECNUM_EIR4 (32 + 21) /* External interrupt 4 */ -#define VECNUM_EIR5 (32 + 26) /* External interrupt 5 */ -#define VECNUM_EIR6 (32 + 27) /* External interrupt 6 */ -#define VECNUM_U2 (32 + 28) /* UART2 */ -#define VECNUM_U3 (32 + 29) /* UART3 */ -#define VECNUM_EIR7 (32 + 30) /* External interrupt 7 */ -#define VECNUM_EIR8 (32 + 31) /* External interrupt 8 */ - -/* UIC 2 */ -#define VECNUM_EIR9 (64 + 2) /* External interrupt 9 */ -#define VECNUM_MS (64 + 3) /* MAL SERR */ -#define VECNUM_TXDE (64 + 4) /* MAL TXDE */ -#define VECNUM_RXDE (64 + 5) /* MAL RXDE */ -#define VECNUM_MTE (64 + 6) /* MAL TXEOB */ -#define VECNUM_MRE (64 + 7) /* MAL RXEOB */ -#define VECNUM_ETH0 (64 + 16) /* Ethernet 0 */ -#define VECNUM_ETH1 (64 + 17) /* Ethernet 1 */ -#define VECNUM_ETH2 (64 + 18) /* Ethernet 2 */ -#define VECNUM_ETH3 (64 + 19) /* Ethernet 3 */ -#define VECNUM_EWU0 (64 + 20) /* Emac 0 wakeup */ -#define VECNUM_EWU1 (64 + 21) /* Emac 1 wakeup */ -#define VECNUM_EWU2 (64 + 22) /* Emac 2 wakeup */ -#define VECNUM_EWU3 (64 + 23) /* Emac 3 wakeup */ -#define VECNUM_EIR10 (64 + 24) /* External interrupt 10 */ -#define VECNUM_EIR11 (64 + 25) /* External interrupt 11 */ - -/* UIC 3 */ -#define VECNUM_EIR12 (96 + 20) /* External interrupt 20 */ -#define VECNUM_EIR13 (96 + 21) /* External interrupt 21 */ -#define VECNUM_EIR14 (96 + 22) /* External interrupt 22 */ -#define VECNUM_EIR15 (96 + 23) /* External interrupt 23 */ -#define VECNUM_PCIEMSI0 (96 + 24) /* PCI Express MSI level 0 */ -#define VECNUM_PCIEMSI1 (96 + 25) /* PCI Express MSI level 1 */ -#define VECNUM_PCIEMSI2 (96 + 26) /* PCI Express MSI level 2 */ -#define VECNUM_PCIEMSI3 (96 + 27) /* PCI Express MSI level 3 */ -#define VECNUM_PCIEMSI4 (96 + 28) /* PCI Express MSI level 4 */ -#define VECNUM_PCIEMSI5 (96 + 29) /* PCI Express MSI level 5 */ -#define VECNUM_PCIEMSI6 (96 + 30) /* PCI Express MSI level 6 */ -#define VECNUM_PCIEMSI7 (96 + 31) /* PCI Express MSI level 7 */ - -#elif defined(CONFIG_440SPE) +#define VECNUM_MAL_SERR (32 + 0) +#define VECNUM_MAL_TXDE (32 + 1) +#define VECNUM_MAL_RXDE (32 + 2) +#endif /* CONFIG_405EX */ +#if defined(CONFIG_440GP) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR) /* UIC 0 */ -#define VECNUM_U0 0 /* UART0 */ -#define VECNUM_U1 1 /* UART1 */ -#define VECNUM_IIC0 2 /* IIC0 */ -#define VECNUM_IIC1 3 /* IIC1 */ -#define VECNUM_PIM 4 /* PCI inbound message */ -#define VECNUM_PCRW 5 /* PCI command reg write */ -#define VECNUM_PPM 6 /* PCI power management */ -#define VECNUM_MSI0 7 /* PCI MSI level 0 */ -#define VECNUM_MSI1 8 /* PCI MSI level 0 */ -#define VECNUM_MSI2 9 /* PCI MSI level 0 */ -#define VECNUM_UIC2NC 10 /* UIC2 non-critical interrupt */ -#define VECNUM_UIC2C 11 /* UIC2 critical interrupt */ -#define VECNUM_D0 12 /* DMA channel 0 */ -#define VECNUM_D1 13 /* DMA channel 1 */ -#define VECNUM_D2 14 /* DMA channel 2 */ -#define VECNUM_D3 15 /* DMA channel 3 */ -#define VECNUM_UIC3NC 16 /* UIC3 non-critical interrupt */ -#define VECNUM_UIC3C 17 /* UIC3 critical interrupt */ -#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ -#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ +#define VECNUM_MAL_TXEOB 10 +#define VECNUM_MAL_RXEOB 11 +#define VECNUM_UIC1NCI 30 +#define VECNUM_UIC1CI 31 /* UIC 1 */ -#define VECNUM_MS (32 + 1 ) /* MAL SERR */ -#define VECNUM_TXDE (32 + 2 ) /* MAL TXDE */ -#define VECNUM_RXDE (32 + 3 ) /* MAL RXDE */ -#define VECNUM_MTE (32 + 6 ) /* MAL Tx EOB */ -#define VECNUM_MRE (32 + 7 ) /* MAL Rx EOB */ -#define VECNUM_CT0 (32 + 12 ) /* GPT compare timer 0 */ -#define VECNUM_CT1 (32 + 13 ) /* GPT compare timer 1 */ -#define VECNUM_CT2 (32 + 14 ) /* GPT compare timer 2 */ -#define VECNUM_CT3 (32 + 15 ) /* GPT compare timer 3 */ -#define VECNUM_CT4 (32 + 16 ) /* GPT compare timer 4 */ -#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */ -#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */ - -/* UIC 2 */ -#define VECNUM_EIR5 (64 + 24) /* External interrupt 5 */ -#define VECNUM_EIR4 (64 + 25) /* External interrupt 4 */ -#define VECNUM_EIR3 (64 + 26) /* External interrupt 3 */ -#define VECNUM_EIR2 (64 + 27) /* External interrupt 2 */ -#define VECNUM_EIR1 (64 + 28) /* External interrupt 1 */ -#define VECNUM_EIR0 (64 + 29) /* External interrupt 0 */ - -#elif defined(CONFIG_440SP) - +#define VECNUM_MAL_SERR (32 + 0) +#define VECNUM_MAL_TXDE (32 + 1) +#define VECNUM_MAL_RXDE (32 + 2) +#define VECNUM_USBDEV (32 + 23) +#define VECNUM_ETH0 (32 + 28) +#define VECNUM_ETH1_OFFS 2 +#endif /* CONFIG_440GP */ + +#if defined(CONFIG_440GX) /* UIC 0 */ -#define VECNUM_U0 0 /* UART0 */ -#define VECNUM_U1 1 /* UART1 */ -#define VECNUM_IIC0 2 /* IIC0 */ -#define VECNUM_IIC1 3 /* IIC1 */ -#define VECNUM_PIM 4 /* PCI inbound message */ -#define VECNUM_PCRW 5 /* PCI command reg write */ -#define VECNUM_PPM 6 /* PCI power management */ -#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ -#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ +#define VECNUM_MAL_TXEOB 10 +#define VECNUM_MAL_RXEOB 11 /* UIC 1 */ -#define VECNUM_EIR0 (32 + 0) /* External interrupt 0 */ -#define VECNUM_MS (32 + 1) /* MAL SERR */ -#define VECNUM_TXDE (32 + 2) /* MAL TXDE */ -#define VECNUM_RXDE (32 + 3) /* MAL RXDE */ -#define VECNUM_MTE (32 + 6) /* MAL Tx EOB */ -#define VECNUM_MRE (32 + 7) /* MAL Rx EOB */ -#define VECNUM_CT0 (32 + 12) /* GPT compare timer 0 */ -#define VECNUM_CT1 (32 + 13) /* GPT compare timer 1 */ -#define VECNUM_CT2 (32 + 14) /* GPT compare timer 2 */ -#define VECNUM_CT3 (32 + 15) /* GPT compare timer 3 */ -#define VECNUM_CT4 (32 + 16) /* GPT compare timer 4 */ -#define VECNUM_ETH0 (32 + 28) /* Ethernet interrupt status */ -#define VECNUM_EWU0 (32 + 29) /* Emac wakeup */ - -#elif defined(CONFIG_440) +#define VECNUM_MAL_SERR (32 + 0) +#define VECNUM_MAL_TXDE (32 + 1) +#define VECNUM_MAL_RXDE (32 + 2) +#define VECNUM_ETH0 (32 + 28) +#define VECNUM_ETH1_OFFS 2 + +/* UICB 0 (440GX only) */ +#define VECNUM_UIC0CI 0 +#define VECNUM_UIC0NCI 1 +#define VECNUM_UIC1CI 2 +#define VECNUM_UIC1NCI 3 +#define VECNUM_UIC2CI 4 +#define VECNUM_UIC2NCI 5 +#endif /* CONFIG_440GX */ +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC 0 */ -#define VECNUM_U0 0 /* UART0 */ -#define VECNUM_U1 1 /* UART1 */ -#define VECNUM_IIC0 2 /* IIC0 */ -#define VECNUM_IIC1 3 /* IIC1 */ -#define VECNUM_PIM 4 /* PCI inbound message */ -#define VECNUM_PCRW 5 /* PCI command reg write */ -#define VECNUM_PPM 6 /* PCI power management */ -#define VECNUM_MSI0 7 /* PCI MSI level 0 */ -#define VECNUM_MSI1 8 /* PCI MSI level 0 */ -#define VECNUM_MSI2 9 /* PCI MSI level 0 */ -#define VECNUM_MTE 10 /* MAL TXEOB */ -#define VECNUM_MRE 11 /* MAL RXEOB */ -#define VECNUM_D0 12 /* DMA channel 0 */ -#define VECNUM_D1 13 /* DMA channel 1 */ -#define VECNUM_D2 14 /* DMA channel 2 */ -#define VECNUM_D3 15 /* DMA channel 3 */ -#define VECNUM_CT0 18 /* GPT compare timer 0 */ -#define VECNUM_CT1 19 /* GPT compare timer 1 */ -#define VECNUM_CT2 20 /* GPT compare timer 2 */ -#define VECNUM_CT3 21 /* GPT compare timer 3 */ -#define VECNUM_CT4 22 /* GPT compare timer 4 */ -#define VECNUM_EIR0 23 /* External interrupt 0 */ -#define VECNUM_EIR1 24 /* External interrupt 1 */ -#define VECNUM_EIR2 25 /* External interrupt 2 */ -#define VECNUM_EIR3 26 /* External interrupt 3 */ -#define VECNUM_EIR4 27 /* External interrupt 4 */ -#define VECNUM_EIR5 28 /* External interrupt 5 */ -#define VECNUM_EIR6 29 /* External interrupt 6 */ -#define VECNUM_UIC1NC 30 /* UIC1 non-critical interrupt */ -#define VECNUM_UIC1C 31 /* UIC1 critical interrupt */ +#define VECNUM_MAL_TXEOB 10 +#define VECNUM_MAL_RXEOB 11 +#define VECNUM_USBDEV 20 +#define VECNUM_ETH0 24 +#define VECNUM_ETH1_OFFS 1 +#define VECNUM_UIC2NCI 28 +#define VECNUM_UIC2CI 29 +#define VECNUM_UIC1NCI 30 +#define VECNUM_UIC1CI 31 /* UIC 1 */ -#define VECNUM_MS (32 + 0 ) /* MAL SERR */ -#define VECNUM_TXDE (32 + 1 ) /* MAL TXDE */ -#define VECNUM_RXDE (32 + 2 ) /* MAL RXDE */ -#define VECNUM_USBDEV (32 + 23) /* USB 1.1/USB 2.0 Device */ -#define VECNUM_ETH0 (32 + 28) /* Ethernet 0 interrupt status */ -#define VECNUM_EWU0 (32 + 29) /* Ethernet 0 wakeup */ - -#else /* !defined(CONFIG_440) */ - -#if defined(CONFIG_405EZ) -#define VECNUM_D0 0 /* DMA channel 0 */ -#define VECNUM_D1 1 /* DMA channel 1 */ -#define VECNUM_D2 2 /* DMA channel 2 */ -#define VECNUM_D3 3 /* DMA channel 3 */ -#define VECNUM_1588 4 /* IEEE 1588 network synchronization */ -#define VECNUM_U0 5 /* UART0 */ -#define VECNUM_U1 6 /* UART1 */ -#define VECNUM_CAN0 7 /* CAN 0 */ -#define VECNUM_CAN1 8 /* CAN 1 */ -#define VECNUM_SPI 9 /* SPI */ -#define VECNUM_IIC0 10 /* I2C */ -#define VECNUM_CHT0 11 /* Chameleon timer high pri interrupt */ -#define VECNUM_CHT1 12 /* Chameleon timer high pri interrupt */ -#define VECNUM_USBH1 13 /* USB Host 1 */ -#define VECNUM_USBH2 14 /* USB Host 2 */ -#define VECNUM_USBDEV 15 /* USB Device */ -#define VECNUM_ETH0 16 /* 10/100 Ethernet interrupt status */ -#define VECNUM_EWU0 17 /* Ethernet wakeup sequence detected */ - -#define VECNUM_MADMAL 18 /* Logical OR of following MadMAL int */ -#define VECNUM_MS 18 /* MAL_SERR_INT */ -#define VECNUM_TXDE 18 /* MAL_TXDE_INT */ -#define VECNUM_RXDE 18 /* MAL_RXDE_INT */ +#define VECNUM_MAL_SERR (32 + 0) +#define VECNUM_MAL_TXDE (32 + 1) +#define VECNUM_MAL_RXDE (32 + 2) -#define VECNUM_MTE 19 /* MAL TXEOB */ -#define VECNUM_MTE1 20 /* MAL TXEOB1 */ -#define VECNUM_MRE 21 /* MAL RXEOB */ -#define VECNUM_NAND 22 /* NAND Flash controller */ -#define VECNUM_ADC 23 /* ADC */ -#define VECNUM_DAC 24 /* DAC */ -#define VECNUM_OPB2PLB 25 /* OPB to PLB bridge interrupt */ -#define VECNUM_RESERVED0 26 /* Reserved */ -#define VECNUM_EIR0 27 /* External interrupt 0 */ -#define VECNUM_EIR1 28 /* External interrupt 1 */ -#define VECNUM_EIR2 29 /* External interrupt 2 */ -#define VECNUM_EIR3 30 /* External interrupt 3 */ -#define VECNUM_EIR4 31 /* External interrupt 4 */ +/* UIC 2 */ +#define VECNUM_EIRQ2 (64 + 3) +#endif /* CONFIG_440EPX */ -#elif defined(CONFIG_405EX) +#if defined(CONFIG_440SP) +/* UIC 0 */ +#define VECNUM_UIC1NCI 30 +#define VECNUM_UIC1CI 31 +/* UIC 1 */ +#define VECNUM_MAL_SERR (32 + 1) +#define VECNUM_MAL_TXDE (32 + 2) +#define VECNUM_MAL_RXDE (32 + 3) +#define VECNUM_MAL_TXEOB (32 + 6) +#define VECNUM_MAL_RXEOB (32 + 7) +#define VECNUM_ETH0 (32 + 28) +#endif /* CONFIG_440SP */ + +#if defined(CONFIG_440SPE) /* UIC 0 */ -#define VECNUM_U0 00 -#define VECNUM_U1 01 -#define VECNUM_IIC0 02 -#define VECNUM_PKA 03 -#define VECNUM_TRNG 04 -#define VECNUM_EBM 05 -#define VECNUM_BGI 06 -#define VECNUM_IIC1 07 -#define VECNUM_SPI 08 -#define VECNUM_EIR0 09 -#define VECNUM_MTE 10 /* MAL Tx EOB */ -#define VECNUM_MRE 11 /* MAL Rx EOB */ -#define VECNUM_DMA0 12 -#define VECNUM_DMA1 13 -#define VECNUM_DMA2 14 -#define VECNUM_DMA3 15 -#define VECNUM_PCIE0AL 16 -#define VECNUM_PCIE0VPD 17 -#define VECNUM_RPCIE0HRST 18 -#define VECNUM_FPCIE0HRST 19 -#define VECNUM_PCIE0TCR 20 -#define VECNUM_PCIEMSI0 21 -#define VECNUM_PCIEMSI1 22 -#define VECNUM_SECURITY 23 -#define VECNUM_ETH0 24 -#define VECNUM_ETH1 25 -#define VECNUM_PCIEMSI2 26 -#define VECNUM_EIR4 27 -#define VECNUM_UIC2NC 28 -#define VECNUM_UIC2C 29 -#define VECNUM_UIC1NC 30 -#define VECNUM_UIC1C 31 +#define VECNUM_UIC2NCI 10 +#define VECNUM_UIC2CI 11 +#define VECNUM_UIC3NCI 16 +#define VECNUM_UIC3CI 17 +#define VECNUM_UIC1NCI 30 +#define VECNUM_UIC1CI 31 /* UIC 1 */ -#define VECNUM_MS (32 + 00) /* MAL SERR */ -#define VECNUM_TXDE (32 + 01) /* MAL TXDE */ -#define VECNUM_RXDE (32 + 02) /* MAL RXDE */ -#define VECNUM_PCIE0BMVC0 (32 + 03) -#define VECNUM_PCIE0DCRERR (32 + 04) -#define VECNUM_EBC (32 + 05) -#define VECNUM_NDFC (32 + 06) -#define VECNUM_PCEI1DCRERR (32 + 07) -#define VECNUM_CT8 (32 + 08) -#define VECNUM_CT9 (32 + 09) -#define VECNUM_PCIE1AL (32 + 10) -#define VECNUM_PCIE1VPD (32 + 11) -#define VECNUM_RPCE1HRST (32 + 12) -#define VECNUM_FPCE1HRST (32 + 13) -#define VECNUM_PCIE1TCR (32 + 14) -#define VECNUM_PCIE1VC0 (32 + 15) -#define VECNUM_CT3 (32 + 16) -#define VECNUM_CT4 (32 + 17) -#define VECNUM_EIR7 (32 + 18) -#define VECNUM_EIR8 (32 + 19) -#define VECNUM_EIR9 (32 + 20) -#define VECNUM_CT5 (32 + 21) -#define VECNUM_CT6 (32 + 22) -#define VECNUM_CT7 (32 + 23) -#define VECNUM_SROM (32 + 24) /* SERIAL ROM */ -#define VECNUM_GPTDECPULS (32 + 25) /* GPT Decrement pulse */ -#define VECNUM_EIR2 (32 + 26) -#define VECNUM_EIR5 (32 + 27) -#define VECNUM_EIR6 (32 + 28) -#define VECNUM_EMAC0WAKE (32 + 29) -#define VECNUM_EIR1 (32 + 30) -#define VECNUM_EMAC1WAKE (32 + 31) +#define VECNUM_MAL_SERR (32 + 1) +#define VECNUM_MAL_TXDE (32 + 2) +#define VECNUM_MAL_RXDE (32 + 3) +#define VECNUM_MAL_TXEOB (32 + 6) +#define VECNUM_MAL_RXEOB (32 + 7) +#define VECNUM_ETH0 (32 + 28) +#endif /* CONFIG_440SPE */ + +#if defined(CONFIG_460EX) || defined(CONFIG_460GT) +/* UIC 0 */ +#define VECNUM_UIC2NCI 10 +#define VECNUM_UIC2CI 11 +#define VECNUM_UIC3NCI 16 +#define VECNUM_UIC3CI 17 +#define VECNUM_UIC1NCI 30 +#define VECNUM_UIC1CI 31 /* UIC 2 */ -#define VECNUM_PCIE0INTA (64 + 00) /* PCIE0 INTA */ -#define VECNUM_PCIE0INTB (64 + 01) /* PCIE0 INTB */ -#define VECNUM_PCIE0INTC (64 + 02) /* PCIE0 INTC */ -#define VECNUM_PCIE0INTD (64 + 03) /* PCIE0 INTD */ -#define VECNUM_EIR3 (64 + 04) /* External IRQ 3 */ -#define VECNUM_DDRMCUE (64 + 05) -#define VECNUM_DDRMCCE (64 + 06) -#define VECNUM_MALINTCOATX0 (64 + 07) /* Interrupt coalecence TX0 */ -#define VECNUM_MALINTCOATX1 (64 + 08) /* Interrupt coalecence TX1 */ -#define VECNUM_MALINTCOARX0 (64 + 09) /* Interrupt coalecence RX0 */ -#define VECNUM_MALINTCOARX1 (64 + 10) /* Interrupt coalecence RX1 */ -#define VECNUM_PCIE1INTA (64 + 11) /* PCIE0 INTA */ -#define VECNUM_PCIE1INTB (64 + 12) /* PCIE0 INTB */ -#define VECNUM_PCIE1INTC (64 + 13) /* PCIE0 INTC */ -#define VECNUM_PCIE1INTD (64 + 14) /* PCIE0 INTD */ -#define VECNUM_RPCIEMSI2 (64 + 15) /* MSI level 2 */ -#define VECNUM_PCIEMSI3 (64 + 16) /* MSI level 2 */ -#define VECNUM_PCIEMSI4 (64 + 17) /* MSI level 2 */ -#define VECNUM_PCIEMSI5 (64 + 18) /* MSI level 2 */ -#define VECNUM_PCIEMSI6 (64 + 19) /* MSI level 2 */ -#define VECNUM_PCIEMSI7 (64 + 20) /* MSI level 2 */ -#define VECNUM_PCIEMSI8 (64 + 21) /* MSI level 2 */ -#define VECNUM_PCIEMSI9 (64 + 22) /* MSI level 2 */ -#define VECNUM_PCIEMSI10 (64 + 23) /* MSI level 2 */ -#define VECNUM_PCIEMSI11 (64 + 24) /* MSI level 2 */ -#define VECNUM_PCIEMSI12 (64 + 25) /* MSI level 2 */ -#define VECNUM_PCIEMSI13 (64 + 26) /* MSI level 2 */ -#define VECNUM_PCIEMSI14 (64 + 27) /* MSI level 2 */ -#define VECNUM_PCIEMSI15 (64 + 28) /* MSI level 2 */ -#define VECNUM_PLB4XAHB (64 + 29) /* PLBxAHB bridge */ -#define VECNUM_USBWAKE (64 + 30) /* USB wakup */ -#define VECNUM_USBOTG (64 + 31) /* USB OTG */ +#define VECNUM_MAL_SERR (64 + 3) +#define VECNUM_MAL_TXDE (64 + 4) +#define VECNUM_MAL_RXDE (64 + 5) +#define VECNUM_MAL_TXEOB (64 + 6) +#define VECNUM_MAL_RXEOB (64 + 7) +#define VECNUM_ETH0 (64 + 16) +#define VECNUM_ETH1_OFFS 1 +#endif /* CONFIG_460EX */ + +#if !defined(VECNUM_ETH1_OFFS) +#define VECNUM_ETH1_OFFS 1 +#endif -#else /* !CONFIG_405EZ */ - -#define VECNUM_U0 0 /* UART0 */ -#define VECNUM_U1 1 /* UART1 */ -#define VECNUM_D0 5 /* DMA channel 0 */ -#define VECNUM_D1 6 /* DMA channel 1 */ -#define VECNUM_D2 7 /* DMA channel 2 */ -#define VECNUM_D3 8 /* DMA channel 3 */ -#define VECNUM_EWU0 9 /* Ethernet wakeup */ -#define VECNUM_MS 10 /* MAL SERR */ -#define VECNUM_MTE 11 /* MAL TXEOB */ -#define VECNUM_MRE 12 /* MAL RXEOB */ -#define VECNUM_TXDE 13 /* MAL TXDE */ -#define VECNUM_RXDE 14 /* MAL RXDE */ -#define VECNUM_ETH0 15 /* Ethernet interrupt status */ -#define VECNUM_EIR0 25 /* External interrupt 0 */ -#define VECNUM_EIR1 26 /* External interrupt 1 */ -#define VECNUM_EIR2 27 /* External interrupt 2 */ -#define VECNUM_EIR3 28 /* External interrupt 3 */ -#define VECNUM_EIR4 29 /* External interrupt 4 */ -#define VECNUM_EIR5 30 /* External interrupt 5 */ -#define VECNUM_EIR6 31 /* External interrupt 6 */ -#endif /* defined(CONFIG_405EZ) */ - -#endif /* defined(CONFIG_440) */ +/* + * Mask definitions (used for example in 4xx_enet.c) + */ +#define UIC_MASK(vec) (0x80000000 >> ((vec) & 0x1f)) +#define UIC_NR(vec) ((vec) >> 5) #endif /* _PPC4xx_UIC_H_ */ diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 8ea1ac37d1..9bcbfe3b7d 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -407,7 +407,7 @@ /* * define UIC_EXT0 ... UIC_EXT6 if external interrupt is active high */ -#define CFG_UIC0_POLARITY (0xFFFFFF80 | UIC_EXT6) +#define CFG_UIC0_POLARITY (0xFFFFFF80 | UIC_MASK(VECNUM_EIRQ6)) /*----------------------------------------------------------------------- * FPGA stuff diff --git a/include/ppc405.h b/include/ppc405.h index fee4ee5b53..f19b67f1bb 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -119,253 +119,6 @@ #define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */ #define dmaadr (DMA_DCR_BASE+0x24) /* DMA address decode register */ -/****************************************************************************** - * Universal interrupt controller - ******************************************************************************/ -#define UIC_SR 0x0 /* UIC status */ -#define UIC_ER 0x2 /* UIC enable */ -#define UIC_CR 0x3 /* UIC critical */ -#define UIC_PR 0x4 /* UIC polarity */ -#define UIC_TR 0x5 /* UIC triggering */ -#define UIC_MSR 0x6 /* UIC masked status */ -#define UIC_VR 0x7 /* UIC vector */ -#define UIC_VCR 0x8 /* UIC vector configuration */ - -#define UIC_DCR_BASE 0xc0 -#define UIC0_DCR_BASE UIC_DCR_BASE -#define uicsr (UIC_DCR_BASE+0x0) /* UIC status */ -#define uicsrs (UIC_DCR_BASE+0x1) /* UIC status set */ -#define uicer (UIC_DCR_BASE+0x2) /* UIC enable */ -#define uiccr (UIC_DCR_BASE+0x3) /* UIC critical */ -#define uicpr (UIC_DCR_BASE+0x4) /* UIC polarity */ -#define uictr (UIC_DCR_BASE+0x5) /* UIC triggering */ -#define uicmsr (UIC_DCR_BASE+0x6) /* UIC masked status */ -#define uicvr (UIC_DCR_BASE+0x7) /* UIC vector */ -#define uicvcr (UIC_DCR_BASE+0x8) /* UIC vector configuration */ - -#if defined(CONFIG_405EX) -#define uic0sr uicsr /* UIC status */ -#define uic0srs uicsrs /* UIC status set */ -#define uic0er uicer /* UIC enable */ -#define uic0cr uiccr /* UIC critical */ -#define uic0pr uicpr /* UIC polarity */ -#define uic0tr uictr /* UIC triggering */ -#define uic0msr uicmsr /* UIC masked status */ -#define uic0vr uicvr /* UIC vector */ -#define uic0vcr uicvcr /* UIC vector configuration*/ - -#define UIC_DCR_BASE1 0xd0 -#define UIC1_DCR_BASE 0xd0 -#define uic1sr (UIC_DCR_BASE1+0x0) /* UIC status */ -#define uic1srs (UIC_DCR_BASE1+0x1) /* UIC status set */ -#define uic1er (UIC_DCR_BASE1+0x2) /* UIC enable */ -#define uic1cr (UIC_DCR_BASE1+0x3) /* UIC critical */ -#define uic1pr (UIC_DCR_BASE1+0x4) /* UIC polarity */ -#define uic1tr (UIC_DCR_BASE1+0x5) /* UIC triggering */ -#define uic1msr (UIC_DCR_BASE1+0x6) /* UIC masked status */ -#define uic1vr (UIC_DCR_BASE1+0x7) /* UIC vector */ -#define uic1vcr (UIC_DCR_BASE1+0x8) /* UIC vector configuration*/ - -#define UIC_DCR_BASE2 0xe0 -#define UIC2_DCR_BASE 0xe0 -#define uic2sr (UIC_DCR_BASE2+0x0) /* UIC status */ -#define uic2srs (UIC_DCR_BASE2+0x1) /* UIC status set */ -#define uic2er (UIC_DCR_BASE2+0x2) /* UIC enable */ -#define uic2cr (UIC_DCR_BASE2+0x3) /* UIC critical */ -#define uic2pr (UIC_DCR_BASE2+0x4) /* UIC polarity */ -#define uic2tr (UIC_DCR_BASE2+0x5) /* UIC triggering */ -#define uic2msr (UIC_DCR_BASE2+0x6) /* UIC masked status */ -#define uic2vr (UIC_DCR_BASE2+0x7) /* UIC vector */ -#define uic2vcr (UIC_DCR_BASE2+0x8) /* UIC vector configuration*/ -#endif - -/*-----------------------------------------------------------------------------+ -| Universal interrupt controller interrupts -+-----------------------------------------------------------------------------*/ -#if defined(CONFIG_405EZ) -#define UIC_DMA0 0x80000000 /* DMA chan. 0 */ -#define UIC_DMA1 0x40000000 /* DMA chan. 1 */ -#define UIC_DMA2 0x20000000 /* DMA chan. 2 */ -#define UIC_DMA3 0x10000000 /* DMA chan. 3 */ -#define UIC_1588 0x08000000 /* IEEE 1588 network synchronization */ -#define UIC_UART0 0x04000000 /* UART 0 */ -#define UIC_UART1 0x02000000 /* UART 1 */ -#define UIC_CAN0 0x01000000 /* CAN 0 */ -#define UIC_CAN1 0x00800000 /* CAN 1 */ -#define UIC_SPI 0x00400000 /* SPI */ -#define UIC_IIC 0x00200000 /* IIC */ -#define UIC_CHT0 0x00100000 /* Chameleon timer high pri interrupt */ -#define UIC_CHT1 0x00080000 /* Chameleon timer high pri interrupt */ -#define UIC_USBH1 0x00040000 /* USB Host 1 */ -#define UIC_USBH2 0x00020000 /* USB Host 2 */ -#define UIC_USBDEV 0x00010000 /* USB Device */ -#define UIC_ENET 0x00008000 /* Ethernet interrupt status */ -#define UIC_ENET1 0x00008000 /* dummy define */ -#define UIC_EMAC_WAKE 0x00004000 /* EMAC wake up */ - -#define UIC_MADMAL 0x00002000 /* Logical OR of following MadMAL int */ -#define UIC_MAL_SERR 0x00002000 /* MAL SERR */ -#define UIC_MAL_TXDE 0x00002000 /* MAL TXDE */ -#define UIC_MAL_RXDE 0x00002000 /* MAL RXDE */ - -#define UIC_MAL_TXEOB 0x00001000 /* MAL TXEOB */ -#define UIC_MAL_TXEOB1 0x00000800 /* MAL TXEOB1 */ -#define UIC_MAL_RXEOB 0x00000400 /* MAL RXEOB */ -#define UIC_NAND 0x00000200 /* NAND Flash controller */ -#define UIC_ADC 0x00000100 /* ADC */ -#define UIC_DAC 0x00000080 /* DAC */ -#define UIC_OPB2PLB 0x00000040 /* OPB to PLB bridge interrupt */ -#define UIC_RESERVED0 0x00000020 /* Reserved */ -#define UIC_EXT0 0x00000010 /* External interrupt 0 */ -#define UIC_EXT1 0x00000008 /* External interrupt 1 */ -#define UIC_EXT2 0x00000004 /* External interrupt 2 */ -#define UIC_EXT3 0x00000002 /* External interrupt 3 */ -#define UIC_EXT4 0x00000001 /* External interrupt 4 */ - -#elif defined(CONFIG_405EX) - -/* UIC 0 */ -#define UIC_U0 0x80000000 /* */ -#define UIC_U1 0x40000000 /* */ -#define UIC_IIC0 0x20000000 /* */ -#define UIC_PKA 0x10000000 /* */ -#define UIC_TRNG 0x08000000 /* */ -#define UIC_EBM 0x04000000 /* */ -#define UIC_BGI 0x02000000 /* */ -#define UIC_IIC1 0x01000000 /* */ -#define UIC_SPI 0x00800000 /* */ -#define UIC_EIRQ0 0x00400000 /**/ -#define UIC_MTE 0x00200000 /*MAL Tx EOB */ -#define UIC_MRE 0x00100000 /*MAL Rx EOB */ -#define UIC_DMA0 0x00080000 /* */ -#define UIC_DMA1 0x00040000 /* */ -#define UIC_DMA2 0x00020000 /* */ -#define UIC_DMA3 0x00010000 /* */ -#define UIC_PCIE0AL 0x00008000 /* */ -#define UIC_PCIE0VPD 0x00004000 /* */ -#define UIC_RPCIE0HRST 0x00002000 /* */ -#define UIC_FPCIE0HRST 0x00001000 /* */ -#define UIC_PCIE0TCR 0x00000800 /* */ -#define UIC_PCIEMSI0 0x00000400 /* */ -#define UIC_PCIEMSI1 0x00000200 /* */ -#define UIC_SECURITY 0x00000100 /* */ -#define UIC_ENET 0x00000080 /* */ -#define UIC_ENET1 0x00000040 /* */ -#define UIC_PCIEMSI2 0x00000020 /* */ -#define UIC_EIRQ4 0x00000010 /**/ -#define UICB0_UIC2NCI 0x00000008 /* */ -#define UICB0_UIC2CI 0x00000004 /* */ -#define UICB0_UIC1NCI 0x00000002 /* */ -#define UICB0_UIC1CI 0x00000001 /* */ - -#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \ - UICB0_UIC1CI | UICB0_UIC2NCI) - -#define UIC_MAL_TXEOB UIC_MTE/* MAL TXEOB */ -#define UIC_MAL_RXEOB UIC_MRE/* MAL RXEOB */ -/* UIC 1 */ -#define UIC_MS 0x80000000 /* MAL SERR */ -#define UIC_MTDE 0x40000000 /* MAL TXDE */ -#define UIC_MRDE 0x20000000 /* MAL RXDE */ -#define UIC_PCIE0BMVC0 0x10000000 /* */ -#define UIC_PCIE0DCRERR 0x08000000 /* */ -#define UIC_EBC 0x04000000 /* */ -#define UIC_NDFC 0x02000000 /* */ -#define UIC_PCEI1DCRERR 0x01000000 /* */ -#define UIC_GPTCMPT8 0x00800000 /* */ -#define UIC_GPTCMPT9 0x00400000 /* */ -#define UIC_PCIE1AL 0x00200000 /* */ -#define UIC_PCIE1VPD 0x00100000 /* */ -#define UIC_RPCE1HRST 0x00080000 /* */ -#define UIC_FPCE1HRST 0x00040000 /* */ -#define UIC_PCIE1TCR 0x00020000 /* */ -#define UIC_PCIE1VC0 0x00010000 /* */ -#define UIC_GPTCMPT3 0x00008000 /* */ -#define UIC_GPTCMPT4 0x00004000 /* */ -#define UIC_EIRQ7 0x00002000 /* */ -#define UIC_EIRQ8 0x00001000 /* */ -#define UIC_EIRQ9 0x00000800 /* */ -#define UIC_GPTCMP5 0x00000400 /* */ -#define UIC_GPTCMP6 0x00000200 /* */ -#define UIC_GPTCMP7 0x00000100 /* */ -#define UIC_SROM 0x00000080 /* SERIAL ROM*/ -#define UIC_GPTDECPULS 0x00000040 /* GPT Decrement pulse*/ -#define UIC_EIRQ2 0x00000020 /* */ -#define UIC_EIRQ5 0x00000010 /* */ -#define UIC_EIRQ6 0x00000008 /* */ -#define UIC_EMAC0WAKE 0x00000004 /* */ -#define UIC_EIRQ1 0x00000002 /* */ -#define UIC_EMAC1WAKE 0x00000001 /* */ -#define UIC_MAL_SERR UIC_MS /* MAL SERR */ -#define UIC_MAL_TXDE UIC_MTDE /* MAL TXDE */ -#define UIC_MAL_RXDE UIC_MRDE /* MAL RXDE */ -/* UIC 2 */ -#define UIC_PCIE0INTA 0x80000000 /* PCIE0 INTA*/ -#define UIC_PCIE0INTB 0x40000000 /* PCIE0 INTB*/ -#define UIC_PCIE0INTC 0x20000000 /* PCIE0 INTC*/ -#define UIC_PCIE0INTD 0x10000000 /* PCIE0 INTD*/ -#define UIC_EIRQ3 0x08000000 /* External IRQ 3*/ -#define UIC_DDRMCUE 0x04000000 /* */ -#define UIC_DDRMCCE 0x02000000 /* */ -#define UIC_MALINTCOATX0 0x01000000 /* Interrupt coalecence TX0*/ -#define UIC_MALINTCOATX1 0x00800000 /* Interrupt coalecence TX1*/ -#define UIC_MALINTCOARX0 0x00400000 /* Interrupt coalecence RX0*/ -#define UIC_MALINTCOARX1 0x00200000 /* Interrupt coalecence RX1*/ -#define UIC_PCIE1INTA 0x00100000 /* PCIE0 INTA*/ -#define UIC_PCIE1INTB 0x00080000 /* PCIE0 INTB*/ -#define UIC_PCIE1INTC 0x00040000 /* PCIE0 INTC*/ -#define UIC_PCIE1INTD 0x00020000 /* PCIE0 INTD*/ -#define UIC_RPCIEMSI2 0x00010000 /* MSI level 2 Note this looks same as uic0-26*/ -#define UIC_PCIEMSI3 0x00008000 /* MSI level 2*/ -#define UIC_PCIEMSI4 0x00004000 /* MSI level 2*/ -#define UIC_PCIEMSI5 0x00002000 /* MSI level 2*/ -#define UIC_PCIEMSI6 0x00001000 /* MSI level 2*/ -#define UIC_PCIEMSI7 0x00000800 /* MSI level 2*/ -#define UIC_PCIEMSI8 0x00000400 /* MSI level 2*/ -#define UIC_PCIEMSI9 0x00000200 /* MSI level 2*/ -#define UIC_PCIEMSI10 0x00000100 /* MSI level 2*/ -#define UIC_PCIEMSI11 0x00000080 /* MSI level 2*/ -#define UIC_PCIEMSI12 0x00000040 /* MSI level 2*/ -#define UIC_PCIEMSI13 0x00000020 /* MSI level 2*/ -#define UIC_PCIEMSI14 0x00000010 /* MSI level 2*/ -#define UIC_PCIEMSI15 0x00000008 /* MSI level 2*/ -#define UIC_PLB4XAHB 0x00000004 /* PLBxAHB bridge*/ -#define UIC_USBWAKE 0x00000002 /* USB wakup*/ -#define UIC_USBOTG 0x00000001 /* USB OTG*/ -#define UIC_ETH0 UIC_ENET -#define UIC_ETH1 UIC_ENET1 - -#else /* !defined(CONFIG_405EZ) */ - -#define UIC_UART0 0x80000000 /* UART 0 */ -#define UIC_UART1 0x40000000 /* UART 1 */ -#define UIC_IIC 0x20000000 /* IIC */ -#define UIC_EXT_MAST 0x10000000 /* External Master */ -#define UIC_PCI 0x08000000 /* PCI write to command reg */ -#define UIC_DMA0 0x04000000 /* DMA chan. 0 */ -#define UIC_DMA1 0x02000000 /* DMA chan. 1 */ -#define UIC_DMA2 0x01000000 /* DMA chan. 2 */ -#define UIC_DMA3 0x00800000 /* DMA chan. 3 */ -#define UIC_EMAC_WAKE 0x00400000 /* EMAC wake up */ -#define UIC_MAL_SERR 0x00200000 /* MAL SERR */ -#define UIC_MAL_TXEOB 0x00100000 /* MAL TXEOB */ -#define UIC_MAL_RXEOB 0x00080000 /* MAL RXEOB */ -#define UIC_MAL_TXDE 0x00040000 /* MAL TXDE */ -#define UIC_MAL_RXDE 0x00020000 /* MAL RXDE */ -#define UIC_ENET 0x00010000 /* Ethernet0 */ -#define UIC_ENET1 0x00004000 /* Ethernet1 on 405EP */ -#define UIC_ECC_CE 0x00004000 /* ECC Correctable Error on 405GP */ -#define UIC_EXT_PCI_SERR 0x00008000 /* External PCI SERR# */ -#define UIC_PCI_PM 0x00002000 /* PCI Power Management */ -#define UIC_EXT0 0x00000040 /* External interrupt 0 */ -#define UIC_EXT1 0x00000020 /* External interrupt 1 */ -#define UIC_EXT2 0x00000010 /* External interrupt 2 */ -#define UIC_EXT3 0x00000008 /* External interrupt 3 */ -#define UIC_EXT4 0x00000004 /* External interrupt 4 */ -#define UIC_EXT5 0x00000002 /* External interrupt 5 */ -#define UIC_EXT6 0x00000001 /* External interrupt 6 */ -#endif /* defined(CONFIG_405EZ) */ - #ifndef CONFIG_405EP /****************************************************************************** * Decompression Controller diff --git a/include/ppc440.h b/include/ppc440.h index f843792443..5df8eb0d13 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -864,98 +864,6 @@ #define cntrl0 (CNTRL_DCR_BASE+0x3b) /* Control 0 register */ #define cntrl1 (CNTRL_DCR_BASE+0x3a) /* Control 1 register */ -/*----------------------------------------------------------------------------- - | Universal interrupt controller - +----------------------------------------------------------------------------*/ -#define UIC_SR 0x0 /* UIC status */ -#define UIC_ER 0x2 /* UIC enable */ -#define UIC_CR 0x3 /* UIC critical */ -#define UIC_PR 0x4 /* UIC polarity */ -#define UIC_TR 0x5 /* UIC triggering */ -#define UIC_MSR 0x6 /* UIC masked status */ -#define UIC_VR 0x7 /* UIC vector */ -#define UIC_VCR 0x8 /* UIC vector configuration */ - -#define UIC0_DCR_BASE 0xc0 -#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */ -#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */ -#define uic0cr (UIC0_DCR_BASE+0x3) /* UIC0 critical */ -#define uic0pr (UIC0_DCR_BASE+0x4) /* UIC0 polarity */ -#define uic0tr (UIC0_DCR_BASE+0x5) /* UIC0 triggering */ -#define uic0msr (UIC0_DCR_BASE+0x6) /* UIC0 masked status */ -#define uic0vr (UIC0_DCR_BASE+0x7) /* UIC0 vector */ -#define uic0vcr (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */ - -#define UIC1_DCR_BASE 0xd0 -#define uic1sr (UIC1_DCR_BASE+0x0) /* UIC1 status */ -#define uic1er (UIC1_DCR_BASE+0x2) /* UIC1 enable */ -#define uic1cr (UIC1_DCR_BASE+0x3) /* UIC1 critical */ -#define uic1pr (UIC1_DCR_BASE+0x4) /* UIC1 polarity */ -#define uic1tr (UIC1_DCR_BASE+0x5) /* UIC1 triggering */ -#define uic1msr (UIC1_DCR_BASE+0x6) /* UIC1 masked status */ -#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */ -#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */ - -#if defined(CONFIG_440SPE) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_460SX) -#define UIC2_DCR_BASE 0xe0 -#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */ -#define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */ -#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */ -#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */ -#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */ -#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */ -#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */ -#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */ -#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */ - -#define UIC3_DCR_BASE 0xf0 -#define uic3sr (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */ -#define uic3srs (UIC3_DCR_BASE+0x1) /* UIC3 status-Read Set */ -#define uic3er (UIC3_DCR_BASE+0x2) /* UIC3 enable */ -#define uic3cr (UIC3_DCR_BASE+0x3) /* UIC3 critical */ -#define uic3pr (UIC3_DCR_BASE+0x4) /* UIC3 polarity */ -#define uic3tr (UIC3_DCR_BASE+0x5) /* UIC3 triggering */ -#define uic3msr (UIC3_DCR_BASE+0x6) /* UIC3 masked status */ -#define uic3vr (UIC3_DCR_BASE+0x7) /* UIC3 vector */ -#define uic3vcr (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */ -#endif /* CONFIG_440SPE */ - -#if defined(CONFIG_440GX) -#define UIC2_DCR_BASE 0x210 -#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status */ -#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */ -#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */ -#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */ -#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */ -#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */ -#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */ -#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */ - - -#define UIC_DCR_BASE 0x200 -#define uicb0sr (UIC_DCR_BASE+0x0) /* UIC Base Status Register */ -#define uicb0er (UIC_DCR_BASE+0x2) /* UIC Base enable */ -#define uicb0cr (UIC_DCR_BASE+0x3) /* UIC Base critical */ -#define uicb0pr (UIC_DCR_BASE+0x4) /* UIC Base polarity */ -#define uicb0tr (UIC_DCR_BASE+0x5) /* UIC Base triggering */ -#define uicb0msr (UIC_DCR_BASE+0x6) /* UIC Base masked status */ -#define uicb0vr (UIC_DCR_BASE+0x7) /* UIC Base vector */ -#define uicb0vcr (UIC_DCR_BASE+0x8) /* UIC Base vector configuration */ -#endif /* CONFIG_440GX */ - -/* The following is for compatibility with 405 code */ -#define uicsr uic0sr -#define uicer uic0er -#define uiccr uic0cr -#define uicpr uic0pr -#define uictr uic0tr -#define uicmsr uic0msr -#define uicvr uic0vr -#define uicvcr uic0vcr - #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) /*----------------------------------------------------------------------------+ | Clock / Power-on-reset DCR's. @@ -1139,622 +1047,6 @@ #define malrcbs24 (MAL_DCR_BASE+0x78) /* RX 24 Channel buffer size reg */ #endif /* CONFIG_440GX */ - -/*---------------------------------------------------------------------------+ -| Universal interrupt controller 0 interrupts (UIC0) -+---------------------------------------------------------------------------*/ -#if defined(CONFIG_440SP) -#define UIC_U0 0x80000000 /* UART 0 */ -#define UIC_U1 0x40000000 /* UART 1 */ -#define UIC_IIC0 0x20000000 /* IIC */ -#define UIC_IIC1 0x10000000 /* IIC */ -#define UIC_PIM 0x08000000 /* PCI0 inbound message */ -#define UIC_PCRW 0x04000000 /* PCI0 command write register */ -#define UIC_PPM 0x02000000 /* PCI0 power management */ -#define UIC_PVPD 0x01000000 /* PCI0 VPD Access */ -#define UIC_MSI0 0x00800000 /* PCI0 MSI level 0 */ -#define UIC_P1IM 0x00400000 /* PCI1 Inbound Message */ -#define UIC_P1CRW 0x00200000 /* PCI1 command write register */ -#define UIC_P1PM 0x00100000 /* PCI1 power management */ -#define UIC_P1VPD 0x00080000 /* PCI1 VPD Access */ -#define UIC_P1MSI0 0x00040000 /* PCI1 MSI level 0 */ -#define UIC_P2IM 0x00020000 /* PCI2 inbound message */ -#define UIC_P2CRW 0x00010000 /* PCI2 command register write */ -#define UIC_P2PM 0x00008000 /* PCI2 power management */ -#define UIC_P2VPD 0x00004000 /* PCI2 VPD access */ -#define UIC_P2MSI0 0x00002000 /* PCI2 MSI level 0 */ -#define UIC_D0CPF 0x00001000 /* DMA0 command pointer */ -#define UIC_D0CSF 0x00000800 /* DMA0 command status */ -#define UIC_D1CPF 0x00000400 /* DMA1 command pointer */ -#define UIC_D1CSF 0x00000200 /* DMA1 command status */ -#define UIC_I2OID 0x00000100 /* I2O inbound doorbell */ -#define UIC_I2OPLF 0x00000080 /* I2O inbound post list */ -#define UIC_I2O0LL 0x00000040 /* I2O0 low latency PLB write */ -#define UIC_I2O1LL 0x00000020 /* I2O1 low latency PLB write */ -#define UIC_I2O0HB 0x00000010 /* I2O0 high bandwidth PLB write */ -#define UIC_I2O1HB 0x00000008 /* I2O1 high bandwidth PLB write */ -#define UIC_GPTCT 0x00000004 /* GPT count timer */ -#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ -#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ -#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) -#define UIC_U0 0x80000000 /* UART 0 */ -#define UIC_U1 0x40000000 /* UART 1 */ -#define UIC_IIC0 0x20000000 /* IIC */ -#define UIC_IIC1 0x10000000 /* IIC */ -#define UIC_PIM 0x08000000 /* PCI inbound message */ -#define UIC_PCRW 0x04000000 /* PCI command register write */ -#define UIC_PPM 0x02000000 /* PCI power management */ -#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */ -#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */ -#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */ -#define UIC_MTE 0x00200000 /* MAL TXEOB */ -#define UIC_MRE 0x00100000 /* MAL RXEOB */ -#define UIC_D0 0x00080000 /* DMA channel 0 */ -#define UIC_D1 0x00040000 /* DMA channel 1 */ -#define UIC_D2 0x00020000 /* DMA channel 2 */ -#define UIC_D3 0x00010000 /* DMA channel 3 */ -#define UIC_RSVD0 0x00008000 /* Reserved */ -#define UIC_RSVD1 0x00004000 /* Reserved */ -#define UIC_CT0 0x00002000 /* GPT compare timer 0 */ -#define UIC_CT1 0x00001000 /* GPT compare timer 1 */ -#define UIC_CT2 0x00000800 /* GPT compare timer 2 */ -#define UIC_CT3 0x00000400 /* GPT compare timer 3 */ -#define UIC_CT4 0x00000200 /* GPT compare timer 4 */ -#define UIC_EIR0 0x00000100 /* External interrupt 0 */ -#define UIC_EIR1 0x00000080 /* External interrupt 1 */ -#define UIC_EIR2 0x00000040 /* External interrupt 2 */ -#define UIC_EIR3 0x00000020 /* External interrupt 3 */ -#define UIC_EIR4 0x00000010 /* External interrupt 4 */ -#define UIC_EIR5 0x00000008 /* External interrupt 5 */ -#define UIC_EIR6 0x00000004 /* External interrupt 6 */ -#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ -#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ - -#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) - -#define UIC_U0 0x80000000 /* UART 0 */ -#define UIC_U1 0x40000000 /* UART 1 */ -#define UIC_IIC0 0x20000000 /* IIC */ -#define UIC_KRD 0x10000000 /* Kasumi Ready for data */ -#define UIC_KDA 0x08000000 /* Kasumi Data Available */ -#define UIC_PCRW 0x04000000 /* PCI command register write */ -#define UIC_PPM 0x02000000 /* PCI power management */ -#define UIC_IIC1 0x01000000 /* IIC */ -#define UIC_SPI 0x00800000 /* SPI */ -#define UIC_EPCISER 0x00400000 /* External PCI SERR */ -#define UIC_MTE 0x00200000 /* MAL TXEOB */ -#define UIC_MRE 0x00100000 /* MAL RXEOB */ -#define UIC_D0 0x00080000 /* DMA channel 0 */ -#define UIC_D1 0x00040000 /* DMA channel 1 */ -#define UIC_D2 0x00020000 /* DMA channel 2 */ -#define UIC_D3 0x00010000 /* DMA channel 3 */ -#define UIC_UD0 0x00008000 /* UDMA irq 0 */ -#define UIC_UD1 0x00004000 /* UDMA irq 1 */ -#define UIC_UD2 0x00002000 /* UDMA irq 2 */ -#define UIC_UD3 0x00001000 /* UDMA irq 3 */ -#define UIC_HSB2D 0x00000800 /* USB2.0 Device */ -#define UIC_OHCI1 0x00000400 /* USB2.0 Host OHCI irq 1 */ -#define UIC_OHCI2 0x00000200 /* USB2.0 Host OHCI irq 2 */ -#define UIC_EIP94 0x00000100 /* Security EIP94 */ -#define UIC_ETH0 0x00000080 /* Emac 0 */ -#define UIC_ETH1 0x00000040 /* Emac 1 */ -#define UIC_EHCI 0x00000020 /* USB2.0 Host EHCI */ -#define UIC_EIR4 0x00000010 /* External interrupt 4 */ -#define UIC_UIC2NC 0x00000008 /* UIC2 non-critical interrupt */ -#define UIC_UIC2C 0x00000004 /* UIC2 critical interrupt */ -#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ -#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ - -/* For compatibility with 405 code */ -#define UIC_MAL_TXEOB UIC_MTE -#define UIC_MAL_RXEOB UIC_MRE - -#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) - -#define UIC_RSVD0 0x80000000 /* N/A - unused */ -#define UIC_U1 0x40000000 /* UART 1 */ -#define UIC_IIC0 0x20000000 /* IIC */ -#define UIC_IIC1 0x10000000 /* IIC */ -#define UIC_PIM 0x08000000 /* PCI inbound message */ -#define UIC_PCRW 0x04000000 /* PCI command register write */ -#define UIC_PPM 0x02000000 /* PCI power management */ -#define UIC_PCIVPD 0x01000000 /* PCI VPD */ -#define UIC_MSI0 0x00800000 /* PCI MSI level 0 */ -#define UIC_EIR0 0x00400000 /* External interrupt 0 */ -#define UIC_UIC2NC 0x00200000 /* UIC2 non-critical interrupt */ -#define UIC_UIC2C 0x00100000 /* UIC2 critical interrupt */ -#define UIC_D0 0x00080000 /* DMA channel 0 */ -#define UIC_D1 0x00040000 /* DMA channel 1 */ -#define UIC_D2 0x00020000 /* DMA channel 2 */ -#define UIC_D3 0x00010000 /* DMA channel 3 */ -#define UIC_UIC3NC 0x00008000 /* UIC3 non-critical interrupt */ -#define UIC_UIC3C 0x00004000 /* UIC3 critical interrupt */ -#define UIC_EIR1 0x00002000 /* External interrupt 1 */ -#define UIC_TRNGDA 0x00001000 /* TRNG data available */ -#define UIC_PKAR1 0x00000800 /* PKA ready (PKA[1]) */ -#define UIC_D1CPFF 0x00000400 /* DMA1 cp fifo full */ -#define UIC_D1CSNS 0x00000200 /* DMA1 cs fifo needs service */ -#define UIC_I2OID 0x00000100 /* I2O inbound door bell */ -#define UIC_I2OLNE 0x00000080 /* I2O Inbound Post List FIFO Not Empty */ -#define UIC_I20R0LL 0x00000040 /* I2O Region 0 Low Latency PLB Write */ -#define UIC_I2OR1LL 0x00000020 /* I2O Region 1 Low Latency PLB Write */ -#define UIC_I20R0HB 0x00000010 /* I2O Region 0 High Bandwidth PLB Write */ -#define UIC_I2OR1HB 0x00000008 /* I2O Region 1 High Bandwidth PLB Write */ -#define UIC_EIP94 0x00000004 /* Security EIP94 */ -#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ -#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ - -#elif !defined(CONFIG_440SPE) -#define UIC_U0 0x80000000 /* UART 0 */ -#define UIC_U1 0x40000000 /* UART 1 */ -#define UIC_IIC0 0x20000000 /* IIC */ -#define UIC_IIC1 0x10000000 /* IIC */ -#define UIC_PIM 0x08000000 /* PCI inbound message */ -#define UIC_PCRW 0x04000000 /* PCI command register write */ -#define UIC_PPM 0x02000000 /* PCI power management */ -#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */ -#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */ -#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */ -#define UIC_MTE 0x00200000 /* MAL TXEOB */ -#define UIC_MRE 0x00100000 /* MAL RXEOB */ -#define UIC_D0 0x00080000 /* DMA channel 0 */ -#define UIC_D1 0x00040000 /* DMA channel 1 */ -#define UIC_D2 0x00020000 /* DMA channel 2 */ -#define UIC_D3 0x00010000 /* DMA channel 3 */ -#define UIC_RSVD0 0x00008000 /* Reserved */ -#define UIC_RSVD1 0x00004000 /* Reserved */ -#define UIC_CT0 0x00002000 /* GPT compare timer 0 */ -#define UIC_CT1 0x00001000 /* GPT compare timer 1 */ -#define UIC_CT2 0x00000800 /* GPT compare timer 2 */ -#define UIC_CT3 0x00000400 /* GPT compare timer 3 */ -#define UIC_CT4 0x00000200 /* GPT compare timer 4 */ -#define UIC_EIR0 0x00000100 /* External interrupt 0 */ -#define UIC_EIR1 0x00000080 /* External interrupt 1 */ -#define UIC_EIR2 0x00000040 /* External interrupt 2 */ -#define UIC_EIR3 0x00000020 /* External interrupt 3 */ -#define UIC_EIR4 0x00000010 /* External interrupt 4 */ -#define UIC_EIR5 0x00000008 /* External interrupt 5 */ -#define UIC_EIR6 0x00000004 /* External interrupt 6 */ -#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */ -#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */ -#endif /* CONFIG_440GX */ - -/* For compatibility with 405 code */ -#define UIC_MAL_TXEOB UIC_MTE -#define UIC_MAL_RXEOB UIC_MRE - -/*---------------------------------------------------------------------------+ -| Universal interrupt controller 1 interrupts (UIC1) -+---------------------------------------------------------------------------*/ -#if defined(CONFIG_440SP) -#define UIC_EIR0 0x80000000 /* External interrupt 0 */ -#define UIC_MS 0x40000000 /* MAL SERR */ -#define UIC_MTDE 0x20000000 /* MAL TXDE */ -#define UIC_MRDE 0x10000000 /* MAL RXDE */ -#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */ -#define UIC_EBCO 0x04000000 /* EBCO interrupt status */ -#define UIC_MTE 0x02000000 /* MAL TXEOB */ -#define UIC_MRE 0x01000000 /* MAL RXEOB */ -#define UIC_P0MSI1 0x00800000 /* PCI0 MSI level 1 */ -#define UIC_P1MSI1 0x00400000 /* PCI1 MSI level 1 */ -#define UIC_P2MSI1 0x00200000 /* PCI2 MSI level 1 */ -#define UIC_L2C 0x00100000 /* L2 cache */ -#define UIC_CT0 0x00080000 /* GPT compare timer 0 */ -#define UIC_CT1 0x00040000 /* GPT compare timer 1 */ -#define UIC_CT2 0x00020000 /* GPT compare timer 2 */ -#define UIC_CT3 0x00010000 /* GPT compare timer 3 */ -#define UIC_CT4 0x00008000 /* GPT compare timer 4 */ -#define UIC_EIR1 0x00004000 /* External interrupt 1 */ -#define UIC_EIR2 0x00002000 /* External interrupt 2 */ -#define UIC_EIR3 0x00001000 /* External interrupt 3 */ -#define UIC_EIR4 0x00000800 /* External interrupt 4 */ -#define UIC_EIR5 0x00000400 /* External interrupt 5 */ -#define UIC_DMAE 0x00000200 /* DMA error */ -#define UIC_I2OE 0x00000100 /* I2O error */ -#define UIC_SRE 0x00000080 /* Serial ROM error */ -#define UIC_P0AE 0x00000040 /* PCI0 asynchronous error */ -#define UIC_P1AE 0x00000020 /* PCI1 asynchronous error */ -#define UIC_P2AE 0x00000010 /* PCI2 asynchronous error */ -#define UIC_ETH0 0x00000008 /* Ethernet 0 */ -#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ -#define UIC_ETH1 0x00000002 /* Reserved */ -#define UIC_XOR 0x00000001 /* XOR */ -#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) -#define UIC_MS 0x80000000 /* MAL SERR */ -#define UIC_MTDE 0x40000000 /* MAL TXDE */ -#define UIC_MRDE 0x20000000 /* MAL RXDE */ -#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/ -#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */ -#define UIC_EBCO 0x04000000 /* EBCO interrupt status */ -#define UIC_EBMI 0x02000000 /* EBMI interrupt status */ -#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */ -#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */ -#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */ -#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */ -#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */ -#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */ -#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */ -#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */ -#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */ -#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */ -#define UIC_PPMI 0x00004000 /* PPM interrupt status */ -#define UIC_EIR7 0x00002000 /* External interrupt 7 */ -#define UIC_EIR8 0x00001000 /* External interrupt 8 */ -#define UIC_EIR9 0x00000800 /* External interrupt 9 */ -#define UIC_EIR10 0x00000400 /* External interrupt 10 */ -#define UIC_EIR11 0x00000200 /* External interrupt 11 */ -#define UIC_EIR12 0x00000100 /* External interrupt 12 */ -#define UIC_SRE 0x00000080 /* Serial ROM error */ -#define UIC_RSVD2 0x00000040 /* Reserved */ -#define UIC_RSVD3 0x00000020 /* Reserved */ -#define UIC_PAE 0x00000010 /* PCI asynchronous error */ -#define UIC_ETH0 0x00000008 /* Ethernet 0 */ -#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ -#define UIC_ETH1 0x00000002 /* Ethernet 1 */ -#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */ - -#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) - -#define UIC_EIR2 0x80000000 /* External interrupt 2 */ -#define UIC_U0 0x40000000 /* UART 0 */ -#define UIC_SPI 0x20000000 /* SPI */ -#define UIC_TRNGAL 0x10000000 /* TRNG alarm */ -#define UIC_DEUE 0x08000000 /* DDR SDRAM ECC correct/uncorrectable error */ -#define UIC_EBCO 0x04000000 /* EBCO interrupt status */ -#define UIC_NDFC 0x02000000 /* NDFC */ -#define UIC_EIPPKPSE 0x01000000 /* EIPPKP slave error */ -#define UIC_P0MSI1 0x00800000 /* PCI0 MSI level 1 */ -#define UIC_P0MSI2 0x00400000 /* PCI0 MSI level 2 */ -#define UIC_P0MSI3 0x00200000 /* PCI0 MSI level 3 */ -#define UIC_L2C 0x00100000 /* L2 cache */ -#define UIC_CT0 0x00080000 /* GPT compare timer 0 */ -#define UIC_CT1 0x00040000 /* GPT compare timer 1 */ -#define UIC_CT2 0x00020000 /* GPT compare timer 2 */ -#define UIC_CT3 0x00010000 /* GPT compare timer 3 */ -#define UIC_CT4 0x00008000 /* GPT compare timer 4 */ -#define UIC_CT5 0x00004000 /* GPT compare timer 5 */ -#define UIC_CT6 0x00002000 /* GPT compare timer 6 */ -#define UIC_GPTDC 0x00001000 /* GPT decrementer pulse */ -#define UIC_EIR3 0x00000800 /* External interrupt 3 */ -#define UIC_EIR4 0x00000400 /* External interrupt 4 */ -#define UIC_DMAE 0x00000200 /* DMA error */ -#define UIC_I2OE 0x00000100 /* I2O error */ -#define UIC_SRE 0x00000080 /* Serial ROM error */ -#define UIC_P0AE 0x00000040 /* PCI0 asynchronous error */ -#define UIC_EIR5 0x00000020 /* External interrupt 5 */ -#define UIC_EIR6 0x00000010 /* External interrupt 6 */ -#define UIC_U2 0x00000008 /* UART 2 */ -#define UIC_U3 0x00000004 /* UART 3 */ -#define UIC_EIR7 0x00000002 /* External interrupt 7 */ -#define UIC_EIR8 0x00000001 /* External interrupt 8 */ - -#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) - -#define UIC_MS 0x80000000 /* MAL SERR */ -#define UIC_MTDE 0x40000000 /* MAL TXDE */ -#define UIC_MRDE 0x20000000 /* MAL RXDE */ -#define UIC_U2 0x10000000 /* UART 2 */ -#define UIC_U3 0x08000000 /* UART 3 */ -#define UIC_EBCO 0x04000000 /* EBCO interrupt status */ -#define UIC_NDFC 0x02000000 /* NDFC */ -#define UIC_KSLE 0x01000000 /* KASUMI slave error */ -#define UIC_CT5 0x00800000 /* GPT compare timer 5 */ -#define UIC_CT6 0x00400000 /* GPT compare timer 6 */ -#define UIC_PLB34I0 0x00200000 /* PLB3X4X MIRQ0 */ -#define UIC_PLB34I1 0x00100000 /* PLB3X4X MIRQ1 */ -#define UIC_PLB34I2 0x00080000 /* PLB3X4X MIRQ2 */ -#define UIC_PLB34I3 0x00040000 /* PLB3X4X MIRQ3 */ -#define UIC_PLB34I4 0x00020000 /* PLB3X4X MIRQ4 */ -#define UIC_PLB34I5 0x00010000 /* PLB3X4X MIRQ5 */ -#define UIC_CT0 0x00008000 /* GPT compare timer 0 */ -#define UIC_CT1 0x00004000 /* GPT compare timer 1 */ -#define UIC_EIR7 0x00002000 /* External interrupt 7 */ -#define UIC_EIR8 0x00001000 /* External interrupt 8 */ -#define UIC_EIR9 0x00000800 /* External interrupt 9 */ -#define UIC_CT2 0x00000400 /* GPT compare timer 2 */ -#define UIC_CT3 0x00000200 /* GPT compare timer 3 */ -#define UIC_CT4 0x00000100 /* GPT compare timer 4 */ -#define UIC_SRE 0x00000080 /* Serial ROM error */ -#define UIC_GPTDC 0x00000040 /* GPT decrementer pulse */ -#define UIC_RSVD0 0x00000020 /* Reserved */ -#define UIC_EPCIPER 0x00000010 /* External PCI PERR */ -#define UIC_EIR0 0x00000008 /* External interrupt 0 */ -#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ -#define UIC_EIR1 0x00000002 /* External interrupt 1 */ -#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */ - -/* For compatibility with 405 code */ -#define UIC_MAL_SERR UIC_MS -#define UIC_MAL_TXDE UIC_MTDE -#define UIC_MAL_RXDE UIC_MRDE -#define UIC_ENET UIC_ETH0 - -#elif !defined(CONFIG_440SPE) -#define UIC_MS 0x80000000 /* MAL SERR */ -#define UIC_MTDE 0x40000000 /* MAL TXDE */ -#define UIC_MRDE 0x20000000 /* MAL RXDE */ -#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/ -#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */ -#define UIC_EBCO 0x04000000 /* EBCO interrupt status */ -#define UIC_EBMI 0x02000000 /* EBMI interrupt status */ -#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */ -#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */ -#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */ -#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */ -#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */ -#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */ -#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */ -#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */ -#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */ -#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */ -#define UIC_PPMI 0x00004000 /* PPM interrupt status */ -#define UIC_EIR7 0x00002000 /* External interrupt 7 */ -#define UIC_EIR8 0x00001000 /* External interrupt 8 */ -#define UIC_EIR9 0x00000800 /* External interrupt 9 */ -#define UIC_EIR10 0x00000400 /* External interrupt 10 */ -#define UIC_EIR11 0x00000200 /* External interrupt 11 */ -#define UIC_EIR12 0x00000100 /* External interrupt 12 */ -#define UIC_SRE 0x00000080 /* Serial ROM error */ -#define UIC_RSVD2 0x00000040 /* Reserved */ -#define UIC_RSVD3 0x00000020 /* Reserved */ -#define UIC_PAE 0x00000010 /* PCI asynchronous error */ -#define UIC_ETH0 0x00000008 /* Ethernet 0 */ -#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ -#define UIC_ETH1 0x00000002 /* Ethernet 1 */ -#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */ -#endif /* CONFIG_440SP */ - -/* For compatibility with 405 code */ -#define UIC_MAL_SERR UIC_MS -#define UIC_MAL_TXDE UIC_MTDE -#define UIC_MAL_RXDE UIC_MRDE -#define UIC_ENET UIC_ETH0 - -/*---------------------------------------------------------------------------+ -| Universal interrupt controller 2 interrupts (UIC2) -+---------------------------------------------------------------------------*/ -#if defined(CONFIG_440GX) -#define UIC_ETH2 0x80000000 /* Ethernet 2 */ -#define UIC_EWU2 0x40000000 /* Ethernet 2 wakeup */ -#define UIC_ETH3 0x20000000 /* Ethernet 3 */ -#define UIC_EWU3 0x10000000 /* Ethernet 3 wakeup */ -#define UIC_TAH0 0x08000000 /* TAH 0 */ -#define UIC_TAH1 0x04000000 /* TAH 1 */ -#define UIC_IMUOBFQ 0x02000000 /* IMU outbound free queue */ -#define UIC_IMUIBPQ 0x01000000 /* IMU inbound post queue */ -#define UIC_IMUIRQDB 0x00800000 /* IMU irq doorbell */ -#define UIC_IMUIBDB 0x00400000 /* IMU inbound doorbell */ -#define UIC_IMUMSG0 0x00200000 /* IMU inbound message 0 */ -#define UIC_IMUMSG1 0x00100000 /* IMU inbound message 1 */ -#define UIC_IMUTO 0x00080000 /* IMU timeout */ -#define UIC_MSI12 0x00040000 /* PCI MSI level 12 */ -#define UIC_MSI13 0x00020000 /* PCI MSI level 13 */ -#define UIC_MSI14 0x00010000 /* PCI MSI level 14 */ -#define UIC_MSI15 0x00008000 /* PCI MSI level 15 */ -#define UIC_EIR13 0x00004000 /* External interrupt 13 */ -#define UIC_EIR14 0x00002000 /* External interrupt 14 */ -#define UIC_EIR15 0x00001000 /* External interrupt 15 */ -#define UIC_EIR16 0x00000800 /* External interrupt 16 */ -#define UIC_EIR17 0x00000400 /* External interrupt 17 */ -#define UIC_PCIVPD 0x00000200 /* PCI VPD */ -#define UIC_L2C 0x00000100 /* L2 Cache */ -#define UIC_ETH2PCS 0x00000080 /* Ethernet 2 PCS */ -#define UIC_ETH3PCS 0x00000040 /* Ethernet 3 PCS */ -#define UIC_RSVD26 0x00000020 /* Reserved */ -#define UIC_RSVD27 0x00000010 /* Reserved */ -#define UIC_RSVD28 0x00000008 /* Reserved */ -#define UIC_RSVD29 0x00000004 /* Reserved */ -#define UIC_RSVD30 0x00000002 /* Reserved */ -#define UIC_RSVD31 0x00000001 /* Reserved */ - -#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) - -#define UIC_TAH0 0x80000000 /* TAHOE 0 */ -#define UIC_TAH1 0x40000000 /* TAHOE 1 */ -#define UIC_EIR9 0x20000000 /* External interrupt 9 */ -#define UIC_MS 0x10000000 /* MAL SERR */ -#define UIC_MTDE 0x08000000 /* MAL TXDE */ -#define UIC_MRDE 0x04000000 /* MAL RXDE */ -#define UIC_MTE 0x02000000 /* MAL TXEOB */ -#define UIC_MRE 0x01000000 /* MAL RXEOB */ -#define UIC_MCTX0 0x00800000 /* MAL interrupt coalescence TX0 */ -#define UIC_MCTX1 0x00400000 /* MAL interrupt coalescence TX1 */ -#define UIC_MCTX2 0x00200000 /* MAL interrupt coalescence TX2 */ -#define UIC_MCTX3 0x00100000 /* MAL interrupt coalescence TX3 */ -#define UIC_MCTR0 0x00080000 /* MAL interrupt coalescence TR0 */ -#define UIC_MCTR1 0x00040000 /* MAL interrupt coalescence TR1 */ -#define UIC_MCTR2 0x00020000 /* MAL interrupt coalescence TR2 */ -#define UIC_MCTR3 0x00010000 /* MAL interrupt coalescence TR3 */ -#define UIC_ETH0 0x00008000 /* Ethernet 0 */ -#define UIC_ETH1 0x00004000 /* Ethernet 1 */ -#define UIC_ETH2 0x00002000 /* Ethernet 2 */ -#define UIC_ETH3 0x00001000 /* Ethernet 3 */ -#define UIC_EWU0 0x00000800 /* Ethernet 0 wakeup */ -#define UIC_EWU1 0x00000400 /* Ethernet 1 wakeup */ -#define UIC_EWU2 0x00000200 /* Ethernet 2 wakeup */ -#define UIC_EWU3 0x00000100 /* Ethernet 3 wakeup */ -#define UIC_EIR10 0x00000080 /* External interrupt 10 */ -#define UIC_EIR11 0x00000040 /* External interrupt 11 */ -#define UIC_RSVD2 0x00000020 /* Reserved */ -#define UIC_PLB4XAHB 0x00000010 /* PLB4XAHB / AHBARB error */ -#define UIC_OTG 0x00000008 /* USB2.0 OTG */ -#define UIC_EHCI 0x00000004 /* USB2.0 Host EHCI */ -#define UIC_OHCI 0x00000002 /* USB2.0 Host OHCI */ -#define UIC_OHCISMI 0x00000001 /* USB2.0 Host OHCI SMI */ - -#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC2 */ - -#define UIC_EIR5 0x80000000 /* External interrupt 5 */ -#define UIC_EIR6 0x40000000 /* External interrupt 6 */ -#define UIC_OPB 0x20000000 /* OPB to PLB bridge interrupt stat */ -#define UIC_EIR2 0x10000000 /* External interrupt 2 */ -#define UIC_EIR3 0x08000000 /* External interrupt 3 */ -#define UIC_DDR2 0x04000000 /* DDR2 sdram */ -#define UIC_MCTX0 0x02000000 /* MAl intp coalescence TX0 */ -#define UIC_MCTX1 0x01000000 /* MAl intp coalescence TX1 */ -#define UIC_MCTR0 0x00800000 /* MAl intp coalescence TR0 */ -#define UIC_MCTR1 0x00400000 /* MAl intp coalescence TR1 */ - -#endif /* CONFIG_440GX */ - -/*---------------------------------------------------------------------------+ -| Universal interrupt controller Base 0 interrupts (UICB0) -+---------------------------------------------------------------------------*/ -#if defined(CONFIG_440GX) -#define UICB0_UIC0CI 0x80000000 /* UIC0 Critical Interrupt */ -#define UICB0_UIC0NCI 0x40000000 /* UIC0 Noncritical Interrupt */ -#define UICB0_UIC1CI 0x20000000 /* UIC1 Critical Interrupt */ -#define UICB0_UIC1NCI 0x10000000 /* UIC1 Noncritical Interrupt */ -#define UICB0_UIC2CI 0x08000000 /* UIC2 Critical Interrupt */ -#define UICB0_UIC2NCI 0x04000000 /* UIC2 Noncritical Interrupt */ - -#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \ - UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI) - -#elif defined(CONFIG_460EX) || defined(CONFIG_460GT) || \ - defined(CONFIG_460SX) - -#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */ -#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */ -#define UICB0_UIC2NCI 0x00200000 /* UIC2 Noncritical Interrupt */ -#define UICB0_UIC2CI 0x00100000 /* UIC2 Critical Interrupt */ -#define UICB0_UIC3NCI 0x00008000 /* UIC3 Noncritical Interrupt */ -#define UICB0_UIC3CI 0x00004000 /* UIC3 Critical Interrupt */ - -#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | UICB0_UIC2CI | \ - UICB0_UIC2NCI | UICB0_UIC3CI | UICB0_UIC3NCI) - -#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) - -#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */ -#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */ -#define UICB0_UIC2CI 0x00000004 /* UIC2 Critical Interrupt */ -#define UICB0_UIC2NCI 0x00000008 /* UIC2 Noncritical Interrupt */ - -#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \ - UICB0_UIC1CI | UICB0_UIC2NCI) - -#elif defined(CONFIG_440GP) || defined(CONFIG_440SP) || \ - defined(CONFIG_440EP) || defined(CONFIG_440GR) - -#define UICB0_UIC1CI 0x00000001 /* UIC1 Critical Interrupt */ -#define UICB0_UIC1NCI 0x00000002 /* UIC1 Noncritical Interrupt */ - -#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI) - -#endif /* CONFIG_440GX */ -/*---------------------------------------------------------------------------+ -| Universal interrupt controller interrupts -+---------------------------------------------------------------------------*/ -#if defined(CONFIG_440SPE) -/*#define UICB0_UIC0CI 0x80000000*/ /* UIC0 Critical Interrupt */ -/*#define UICB0_UIC0NCI 0x40000000*/ /* UIC0 Noncritical Interrupt */ -#define UICB0_UIC1CI 0x00000002 /* UIC1 Critical Interrupt */ -#define UICB0_UIC1NCI 0x00000001 /* UIC1 Noncritical Interrupt */ -#define UICB0_UIC2CI 0x00200000 /* UIC2 Critical Interrupt */ -#define UICB0_UIC2NCI 0x00100000 /* UIC2 Noncritical Interrupt */ -#define UICB0_UIC3CI 0x00008000 /* UIC3 Critical Interrupt */ -#define UICB0_UIC3NCI 0x00004000 /* UIC3 Noncritical Interrupt */ - -#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | UICB0_UIC2CI | \ - UICB0_UIC2NCI | UICB0_UIC3CI | UICB0_UIC3NCI) -/*---------------------------------------------------------------------------+ -| Universal interrupt controller 0 interrupts (UIC0) -+---------------------------------------------------------------------------*/ -#define UIC_U0 0x80000000 /* UART 0 */ -#define UIC_U1 0x40000000 /* UART 1 */ -#define UIC_IIC0 0x20000000 /* IIC */ -#define UIC_IIC1 0x10000000 /* IIC */ -#define UIC_PIM 0x08000000 /* PCI inbound message */ -#define UIC_PCRW 0x04000000 /* PCI command register write */ -#define UIC_PPM 0x02000000 /* PCI power management */ -#define UIC_PVPDA 0x01000000 /* PCIx 0 vpd access */ -#define UIC_MSI0 0x00800000 /* PCIx MSI level 0 */ -#define UIC_EIR15 0x00400000 /* External intp 15 */ -#define UIC_PEMSI0 0x00080000 /* PCIe MSI level 0 */ -#define UIC_PEMSI1 0x00040000 /* PCIe MSI level 1 */ -#define UIC_PEMSI2 0x00020000 /* PCIe MSI level 2 */ -#define UIC_PEMSI3 0x00010000 /* PCIe MSI level 3 */ -#define UIC_EIR14 0x00002000 /* External interrupt 14 */ -#define UIC_D0CPFF 0x00001000 /* DMA0 cp fifo full */ -#define UIC_D0CSNS 0x00000800 /* DMA0 cs fifo needs service */ -#define UIC_D1CPFF 0x00000400 /* DMA1 cp fifo full */ -#define UIC_D1CSNS 0x00000200 /* DMA1 cs fifo needs service */ -#define UIC_I2OID 0x00000100 /* I2O inbound door bell */ -#define UIC_I2OLNE 0x00000080 /* I2O Inbound Post List FIFO Not Empty */ -#define UIC_I20R0LL 0x00000040 /* I2O Region 0 Low Latency PLB Write */ -#define UIC_I2OR1LL 0x00000020 /* I2O Region 1 Low Latency PLB Write */ -#define UIC_I20R0HB 0x00000010 /* I2O Region 0 High Bandwidth PLB Write */ -#define UIC_I2OR1HB 0x00000008 /* I2O Region 1 High Bandwidth PLB Write */ -#define UIC_CPTCNT 0x00000004 /* GPT Count Timer */ -/*---------------------------------------------------------------------------+ -| Universal interrupt controller 1 interrupts (UIC1) -+---------------------------------------------------------------------------*/ -#define UIC_EIR13 0x80000000 /* externei intp 13 */ -#define UIC_MS 0x40000000 /* MAL SERR */ -#define UIC_MTDE 0x20000000 /* MAL TXDE */ -#define UIC_MRDE 0x10000000 /* MAL RXDE */ -#define UIC_DEUE 0x08000000 /* DDR SDRAM ECC correct/uncorrectable error */ -#define UIC_EBCO 0x04000000 /* EBCO interrupt status */ -#define UIC_MTE 0x02000000 /* MAL TXEOB */ -#define UIC_MRE 0x01000000 /* MAL RXEOB */ -#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */ -#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */ -#define UIC_MSI3 0x00200000 /* PCI MSI level 3 */ -#define UIC_L2C 0x00100000 /* L2 cache */ -#define UIC_CT0 0x00080000 /* GPT compare timer 0 */ -#define UIC_CT1 0x00040000 /* GPT compare timer 1 */ -#define UIC_CT2 0x00020000 /* GPT compare timer 2 */ -#define UIC_CT3 0x00010000 /* GPT compare timer 3 */ -#define UIC_CT4 0x00008000 /* GPT compare timer 4 */ -#define UIC_EIR12 0x00004000 /* External interrupt 12 */ -#define UIC_EIR11 0x00002000 /* External interrupt 11 */ -#define UIC_EIR10 0x00001000 /* External interrupt 10 */ -#define UIC_EIR9 0x00000800 /* External interrupt 9 */ -#define UIC_EIR8 0x00000400 /* External interrupt 8 */ -#define UIC_DMAE 0x00000200 /* dma error */ -#define UIC_I2OE 0x00000100 /* i2o error */ -#define UIC_SRE 0x00000080 /* Serial ROM error */ -#define UIC_PCIXAE 0x00000040 /* Pcix0 async error */ -#define UIC_EIR7 0x00000020 /* External interrupt 7 */ -#define UIC_EIR6 0x00000010 /* External interrupt 6 */ -#define UIC_ETH0 0x00000008 /* Ethernet 0 */ -#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */ -#define UIC_ETH1 0x00000002 /* reserved */ -#define UIC_XOR 0x00000001 /* xor */ - -/*---------------------------------------------------------------------------+ -| Universal interrupt controller 2 interrupts (UIC2) -+---------------------------------------------------------------------------*/ -#define UIC_PEOAL 0x80000000 /* PE0 AL */ -#define UIC_PEOVA 0x40000000 /* PE0 VPD access */ -#define UIC_PEOHRR 0x20000000 /* PE0 Host reset request rising */ -#define UIC_PE0HRF 0x10000000 /* PE0 Host reset request falling */ -#define UIC_PE0TCR 0x08000000 /* PE0 TCR */ -#define UIC_PE0BVCO 0x04000000 /* PE0 Busmaster VCO */ -#define UIC_PE0DCRE 0x02000000 /* PE0 DCR error */ -#define UIC_PE1AL 0x00800000 /* PE1 AL */ -#define UIC_PE1VA 0x00400000 /* PE1 VPD access */ -#define UIC_PE1HRR 0x00200000 /* PE1 Host reset request rising */ -#define UIC_PE1HRF 0x00100000 /* PE1 Host reset request falling */ -#define UIC_PE1TCR 0x00080000 /* PE1 TCR */ -#define UIC_PE1BVCO 0x00040000 /* PE1 Busmaster VCO */ -#define UIC_PE1DCRE 0x00020000 /* PE1 DCR error */ -#define UIC_PE2AL 0x00008000 /* PE2 AL */ -#define UIC_PE2VA 0x00004000 /* PE2 VPD access */ -#define UIC_PE2HRR 0x00002000 /* PE2 Host reset request rising */ -#define UIC_PE2HRF 0x00001000 /* PE2 Host reset request falling */ -#define UIC_PE2TCR 0x00000800 /* PE2 TCR */ -#define UIC_PE2BVCO 0x00000400 /* PE2 Busmaster VCO */ -#define UIC_PE2DCRE 0x00000200 /* PE2 DCR error */ -#define UIC_EIR5 0x00000080 /* External interrupt 5 */ -#define UIC_EIR4 0x00000040 /* External interrupt 4 */ -#define UIC_EIR3 0x00000020 /* External interrupt 3 */ -#define UIC_EIR2 0x00000010 /* External interrupt 2 */ -#define UIC_EIR1 0x00000008 /* External interrupt 1 */ -#define UIC_EIR0 0x00000004 /* External interrupt 0 */ -#endif /* CONFIG_440SPE */ - /*-----------------------------------------------------------------------------+ | SDR0 Bit Settings +-----------------------------------------------------------------------------*/ |
