diff options
365 files changed, 8461 insertions, 2610 deletions
diff --git a/CREDITS b/CREDITS deleted file mode 100644 index 43d476423d..0000000000 --- a/CREDITS +++ /dev/null @@ -1,536 +0,0 @@ -# -# Parts of the development effort for this project have been -# sponsored by SIEMENS AG, Austria. Thanks to SIEMENS for -# supporting an Open Source project! -# -# -# This is at least a partial credits-file of individual people that -# have contributed to the U-Boot project. It is sorted by name and -# formatted to allow easy grepping and beautification by scripts. -# The fields are: name (N), email (E), web-address (W), PGP key ID -# and fingerprint (P), description (D), and snail-mail address (S). -# Thanks, -# -# Wolfgang Denk -#---------- - -N: Dr. Bruno Achauer -E: bruno@exet-ag.de -D: Support for NetBSD (both as host and target system) - -N: Guillaume Alexandre -E: guillaume.alexandre@gespac.ch -D: Add PCIPPC6 configuration - -N: Pantelis Antoniou -E: panto@intracom.gr -D: NETVIA & NETPHONE board support, ARTOS support. -D: Support for Silicon Turnkey eXpress XTc - -N: Pierre Aubert -E: <p.aubert@staubli.com> -D: Support for RPXClassic board - -N: Yuli Barcohen -E: yuli@arabellasw.com -D: Unified support for Motorola MPC826xADS/MPC8272ADS/PQ2FADS boards. -D: Support for Zephyr Engineering ZPC.1900 board. -D: Support for Interphase iSPAN boards. -D: Support for Analogue&Micro Adder boards. -D: Support for Analogue&Micro Rattler boards. -W: http://www.arabellasw.com - -N: Jerry van Baren -E: <vanbaren@cideas.com> -D: BedBug port to 603e core (MPC82xx). Code for enhanced memory test. - -N: Pavel Bartusek -E: <pba@sysgo.com> -D: Reiserfs support -W: http://www.elinos.com - -N: Andre Beaudin -E: <andre.beaudin@colubris.com> -D: PCMCIA, Ethernet, TFTP - -N: Jon Benediktsson -E: jonb@marel.is -D: Support for Marel V37 board - -N: Raphael Bossek -E: raphael.bossek@solutions4linux.de -D: 8xxrom-0.3.0 - -N: Cliff Brake -E: cliff.brake@gmail.com -D: Port to Vibren PXA255 IDP platform -W: http://www.vibren.com -W: http://bec-systems.com - -N: Rick Bronson -E: rick@efn.org -D: Atmel AT91RM9200DK and NAND support - -N: David Brown -E: DBrown03@harris.com -D: Extensions to 8xxrom-0.3.0 - -N: Oliver Brown -E: obrown@adventnetworks.com -D: Port to the gw8260 board - -N: Jonathan De Bruyne -E: jonathan.debruyne@siemens.atea.be -D: Port to Siemens IAD210 board - -N: Ken Chou -E: kchou@ieee.org -D: Support for A3000 SBC board - -N: Conn Clark -E: clark@esteem.com -D: ESTEEM192E support - -N: Magnus Damm -E: damm@opensource.se -D: 8xxrom - -N: Richard Danter -E: richard.danter@windriver.com -D: Support for Wind River PPMC 7xx/74xx boards - -N: George G. Davis -E: gdavis@mvista.com -D: Board ports for ADS GraphicsClient+ and Intel Assabet - -N: Arun Dharankar -E: ADharankar@ATTBI.Com -D: threads / scheduler example code - -N: K?ri Dav??sson -E: kd@flaga.is -D: FLAGA DM Support - -N: Wolfgang Denk -E: wd@denx.de -D: U-Boot initial version, continuing maintenance, ARMBoot merge -W: http://www.denx.de - -N: Dan A. Dickey -E: ddickey@charter.net -D: FADS Support - -N: Mike Dunn -E: mikedunn@newsguy.com -D: Palmtreo680 board, docg4 nand flash driver - -N: Dave Ellis -E: DGE@sixnetio.com -D: EEPROM Speedup - -N: Daniel Engstr?m -E: daniel@omicron.se -D: x86 port, Support for sc520_cdp board - -N: Hayden Fraser -E: Hayden.Fraser@freescale.com -D: Support for ColdFire MCF5253 -W: www.freescale.com - -N: Dr. Wolfgang Grandegger -E: wg@denx.de -D: Support for Interphase 4539 T1/E1/J1 PMC, CCM, SCM boards -W: www.denx.de - -N: Peter Figuli -E: peposh@etc.sk -D: Support for WEP EP250 (PXA) board - -N: Thomas Frieden -E: ThomasF@hyperion-entertainment.com -D: Support for AmigaOne - -N: Paul Gortmaker -E: paul.gortmaker@windriver.com -D: Support for WRS SBC8347/8349 boards - -N: Frank Gottschling -E: fgottschling@eltec.de -D: Support for ELTEC MHPC/ELPPC boards, cfb-console, i8042, SMI LynxEM -W: www.eltec.de - -N: Marius Groeger -E: mgroeger@sysgo.de -D: MBX Support, board specific function interface, EST SBC8260 support; initial support for StrongARM (LART), ARM720TDMI (implementa A7) -W: www.elinos.com - -N: Kirk Haderlie -E: khaderlie@vividimage.com -D: Added TFTP to 8xxrom (-> 0.3.1) - -N: Chris Hallinan -E: clh@net1plus.com -D: DHCP Support - -N: Anne-Sophie Harnois -E: Anne-Sophie.Harnois@nextream.fr -D: Port to Walnut405 board - -N: Andreas Heppel -E: aheppel@sysgo.de -D: CPU Support for MPC 75x - -N: Josh Huber -E: huber@alum.wpi.edu -D: Port to the Galileo Evaluation Board, and the MPC74xx cpu series. -W: http://www.mclx.com/ - -H: Stuart Hughes -E: stuarth@lineo.com -D: Port to MPC8260ADS board - -H: Rich Ireland -E: r.ireland@computer.org -D: FPGA device configuration driver - -H: Mark Jackson -E: mpfj@mimc.co.uk -D: Port to MIMC200 board - -N: Gary Jennejohn -E: garyj@jennejohn.org -D: Support for Samsung ARM920T S3C2400X, ARM920T "TRAB" -W: www.denx.de - -N: Murray Jensen -E: Murray.Jensen@csiro.au -D: Initial 8260 support; GDB support -D: Port to Cogent+Hymod boards; Hymod Board Database - -N: Yoo. Jonghoon -E: yooth@ipone.co.kr -D: Added port to the RPXlite board - -N: Mark Jonas -E: mark.jonas@freescale.com -D: Support for Freescale Total5200 platform -W: http://www.mobilegt.com/ - -N: Mark Jonas -E: mark.jonas@de.bosch.com -D: Support for MPR2 board - -N: Sam Song -E: samsongshu@yahoo.com.cn -D: Port to the RPXlite_DW board - -N: Brad Kemp -E: Brad.Kemp@seranoa.com -D: Port to Windriver ppmc8260 board - -N: Sangmoon Kim -E: dogoil@etinsys.com -D: Support for debris board -D: Support for KVME080 board - -N: Frederick W. Klatt -E: fred.klatt@windriver.com -D: Support for Wind River SBC8540/SBC8560 boards - -N: Thomas Koeller -E: tkoeller@gmx.net -D: Port to Motorola Sandpoint 3 (MPC8240) - -N: Raghu Krishnaprasad -E: Raghu.Krishnaprasad@fci.com -D: Support for Adder-II MPC852T evaluation board -W: http://www.forcecomputers.com - -N: Sergey Kubushyn -E: ksi@koi8.net -D: Support for various TI DaVinci based boards. - -N: Bernhard Kuhn -E: bkuhn@metrowerks.com -D Support for Coldfire CPU; Support for Motorola M5272C3 and M5282EVB boards - -N: Prakash Kumar -E: prakash@embedx.com -D Support for Intrinsyc CERF PXA250 board. - -N: Thomas Lange -E: thomas@corelatus.se -D: Support for GTH, GTH2 and dbau1x00 boards; lots of PCMCIA fixes - -N: The LEOX team -E: team@leox.org -D: Support for LEOX boards, DS164x RTC -W: http://www.leox.org - -N: TsiChung Liew -E: Tsi-Chung.Liew@freescale.com -D: Support for ColdFire MCF523x, MCF532x, MCF5445x, MCF547x_8x -W: www.freescale.com - -N: Leif Lindholm -E: leif.lindholm@i3micro.com -D: Support for AMD dbau1550 board. - -N: Stephan Linz -E: linz@li-pro.net -D: Support for Nios Stratix Development Kit (DK-1S10) -D: Support for SSV ADNP/ESC1 (Nios Cyclone) -W: http://www.li-pro.net - -N: Dave Liu -E: daveliu@freescale.com -D: Support for MPC8315, MPC832x, MPC8360, MPC837x -W: www.freescale.com - -N: Raymond Lo -E: lo@routefree.com -D: Support for DOS partitions - -N: James MacAulay -E: james.macaulay@amirix.com -D: Suppport for Amirix AP1000 -W: www.amirix.com - -N: Dan Malek -E: dan@embeddedalley.com -D: FADSROM, the grandfather of all of this -D: Support for Silicon Turnkey eXpress XTc - -N: Andrea "llandre" Marson -E: andrea.marson@dave-tech.it -D: Port to PPChameleonEVB board -W: www.dave-tech.it - -N: Reinhard Meyer -E: r.meyer@emk-elektronik.de -D: Port to EMK TOP860 Module - -N: Jay Monkman -E: jtm@smoothsmoothie.com -D: EST SBC8260 support - -N: Frank Morauf -E: frank.morauf@salzbrenner.com -D: Support for Embedded Planet RPX Super Board - -N: David M?ller -E: d.mueller@elsoft.ch -D: Support for Samsung ARM920T SMDK2410 eval board - -N: Scott McNutt -E: smcnutt@psyent.com -D: Support for Altera Nios-32 CPU -D: Support for Altera Nios-II CPU -D: Support for Nios Cyclone Development Kit (DK-1C20) -W: http://www.psyent.com - -N: Rolf Offermanns -E: rof@sysgo.de -D: Initial support for SSV-DNP1110, SMC91111 driver -W: www.elinos.com - -N: John Otken -E: jotken@softadvances.com -D: Support for AMCC Luan 440SP board - -N: Tolunay Orkun -E: torkun@nextio.com -D: Support for Cogent CSB272 & CSB472 boards - -N: Keith Outwater -E: keith_outwater@mvis.com -D: Support for generic/custom MPC860T boards (GEN860T, GEN860T_SC) - -N: Frank Panno -E: fpanno@delphintech.com -D: Support for Embedded Planet EP8260 Board - -N: Denis Peter -E: d.peter@mpl.ch -D: Support for 4xx SCSI, floppy, CDROM, CT69000 video, ... -D: Support for PIP405 board -D: Support for MIP405 board - -N: Dave Peverley -E: dpeverley@mpc-data.co.uk -W: http://www.mpc-data.co.uk -D: OMAP730 P2 board support - -N: Bill Pitts -E: wlp@mindspring.com -D: BedBug embedded debugger code - -N: Daniel Poirot -E: dan.poirot@windriver.com -D: Support for the Wind River sbc405, sbc8240 board -W: http://www.windriver.com - -N: Stelian Pop -E: stelian@popies.net -D: Atmel AT91CAP9ADK support - -N: Ricardo Ribalda Delgado -E: ricardo.ribalda@uam.es -D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460, v5fx30teval -D: Virtex ppc440 generic architecture -D: Virtex ppc405 generic architecture -W: http://www.ii.uam.es/~rribalda - -N: Stefan Roese -E: sr@denx.de -D: AMCC PPC4xx Support -W: http://www.denx.de - -N: Erwin Rol -E: erwin@muffin.org -D: boot support for RTEMS - -N: Paul Ruhland -E: pruhland@rochester.rr.com -D: Port to Logic Zoom LH7A40x SDK board(s) - -N: Neil Russell -E: caret@c-side.com -D: Author of LiMon-1.4.2, which contributed some ideas - -N: Travis B. Sawyer -E: travis.sawyer@sandburst.com -D: Support for AMCC PPC440GX, XES XPedite1000 440GX PrPMC board. AMCC 440gx Ref Platform (Ocotea) - -N: Paolo Scaffardi -E: arsenio@tin.it -D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots more - -N: Andre Schwarz -E: andre.schwarz@matrix-vision.de -D: Support for Matrix Vision boards (MVBLM7/MVBC_P/MVSMR) - -N: Robert Schwebel -E: r.schwebel@pengutronix.de -D: Support for csb226 and innokom boards (PXA2xx) - -N: Aaron Sells -E: sellsa@embeddedplanet.com -D: Support for EP82xxM - -N: Art Shipkowski -E: art@videon-central.com -D: Support for NetSilicon NS7520 -D: Support for ColdFire MCF5275 - -N: Jeremy C. Andrus -E: jeremy@jeremya.com -D: ColdFire MCF5249 initialization code -W: jeremya.com - -N: Michal Simek -E: monstr@monstr.eu -D: Support for Microblaze, ML401, XUPV2P board -W: www.monstr.eu - -N: Yasushi Shoji -E: yashi@atmark-techno.com -D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board - -N: Kurt Stremerch -E: kurt@exys.be -D: Support for Exys XSEngine board - -N: Andrea Scian -E: andrea.scian@dave-tech.it -D: Port to B2 board -W: www.dave-tech.it - -N: Timur Tabi -E: timur@freescale.com -D: Support for MPC8349E-mITX -W: www.freescale.com - -N: Rob Taylor -E: robt@flyingpig.com -D: Port to MBX860T and Sandpoint8240 - -N: Erik Theisen -E: etheisen@mindspring.com -D: MBX8xx and many other patches - -N: Jim Thompson -E: jim@musenki.com -D: Support for MUSENKI board - -N: Rune Torgersen -E: <runet@innovsys.com> -D: Support for Motorola MPC8266ADS board - -N: Greg Ungerer -E: greg.ungerer@opengear.com -D: Support for ks8695 CPU, and OpenGear cmXXXX boards - -N: David Updegraff -E: dave@cray.com -D: Port to Cray L1 board; DHCP vendor extensions - -N: Christian Vejlbo -E: christian.vejlbo@tellabs.com -D: FADS860T ethernet support - -N: Robert Whaley -E: rwhaley@applieddata.net -D: Port to ARM PXA27x adsvix SBC - -N: Martin Winistoerfer -E: martinwinistoerfer@gmx.ch -D: Port to MPC555/556 microcontrollers and support for cmi board - -N: David Wu -E: support@arcturusnetworks.com -D: Mercury Security EP2500 -W: http://www.arcturusnetworks.com - -N: Ming-Len Wu -E: minglen_wu@techware.com.tw -D: Motorola MX1ADS board support -W: http://www.techware.com.tw/ - -N: Xianghua Xiao -E: x.xiao@motorola.com -D: Support for Motorola 85xx(PowerQUICC III) chip, MPC8540ADS and MPC8560ADS boards. - -N: John Zhan -E: zhanz@sinovee.com -D: Support for SinoVee Microsystems SC8xx SBC - -N: Alex Zuepke -E: azu@sysgo.de -D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM -W: www.elinos.com - -N: Nobuhiro Iwamatsu -E: iwamatsu@nigauri.org -D: Support for SuperH, MS7750SE01 and MS7722SE01 boards. -W: http://www.nigauri.org/~iwamatsu/ - -N: Alan Lu -E: alnalu001@gmail.com -D: Support for Artila M-501 starter kit -W: http://www.artila.com/ - -N: Kimmo Leppala -E: kimmo.leppala@sysart.fi -D: Support for Artila M-501 starter kit -W: http://www.sysart.fi/ - -N: Timo Tuunainen -E: timo.tuunainen@sysart.fi -D: Support for Artila M-501 starter kit -W: http://www.sysart.fi/ - -N: Philip Balister -E: philip@opensdr.com -D: Port to Lyrtech SFFSDR development board. -W: www.opensdr.com @@ -107,6 +107,12 @@ config SYS_EXTRA_OPTIONS configuration to Kconfig. Since this option will be removed sometime, new boards should not use this option. +config SYS_TEXT_BASE + depends on SPARC + hex "Text Base" + help + TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture + endmenu # Boot images source "arch/Kconfig" diff --git a/MAINTAINERS b/MAINTAINERS index fd346c9fca..c8386ab619 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -192,7 +192,8 @@ CFI FLASH M: Stefan Roese <sr@denx.de> S: Maintained T: git git://git.denx.de/u-boot-cfi-flash.git -F: drivers/mtd/* +F: drivers/mtd/cfi_flash.c +F: drivers/mtd/jedec_flash.c COLDFIRE M: Jason Jin <jason.jin@freescale.com> @@ -253,7 +254,7 @@ T: git git://git.denx.de/u-boot-mips.git F: arch/mips/ MMC -M: Pantelis Antoniou <panto.antoniou-consulting.com> +M: Pantelis Antoniou <panto@antoniou-consulting.com> S: Maintained T: git git://git.denx.de/u-boot-mmc.git F: drivers/mmc/ @@ -1,14 +1,7 @@ -# -# (C) Copyright 2000-2013 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -VERSION = 2014 -PATCHLEVEL = 10 +VERSION = 2015 +PATCHLEVEL = 01 SUBLEVEL = -EXTRAVERSION = +EXTRAVERSION = -rc1 NAME = # *DOCUMENTATION* @@ -17,11 +10,9 @@ NAME = # Comments in this file are targeted only to the developer, do not # expect to learn how to build the kernel reading this file. -# Do not: -# o use make's built-in rules and variables -# (this increases performance and avoids hard-to-debug behaviour); -# o print "Entering directory ..."; -MAKEFLAGS += -rR --no-print-directory +# Do not use make's built-in rules and variables +# (this increases performance and avoids hard-to-debug behaviour); +MAKEFLAGS += -rR # Avoid funny character set dependencies unexport LC_ALL @@ -29,6 +20,9 @@ LC_COLLATE=C LC_NUMERIC=C export LC_COLLATE LC_NUMERIC +# Avoid interference with shell env settings +unexport GREP_OPTIONS + # We are using a recursive build, so we need to do a little thinking # to get the ordering right. # @@ -45,6 +39,29 @@ export LC_COLLATE LC_NUMERIC # descending is started. They are now explicitly listed as the # prepare rule. +# Beautify output +# --------------------------------------------------------------------------- +# +# Normally, we echo the whole command before executing it. By making +# that echo $($(quiet)$(cmd)), we now have the possibility to set +# $(quiet) to choose other forms of output instead, e.g. +# +# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ +# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< +# +# If $(quiet) is empty, the whole command will be printed. +# If it is set to "quiet_", only the short version will be printed. +# If it is set to "silent_", nothing will be printed at all, since +# the variable $(silent_cmd_cc_o_c) doesn't exist. +# +# A simple variant is to prefix commands with $(Q) - that's useful +# for commands that shall be hidden in non-verbose mode. +# +# $(Q)ln $@ :< +# +# If KBUILD_VERBOSE equals 0 then the above command will be hidden. +# If KBUILD_VERBOSE equals 1 then the above command is displayed. +# # To put more focus on warnings, be less verbose as default # Use 'make V=1' to see the full commands @@ -55,33 +72,28 @@ ifndef KBUILD_VERBOSE KBUILD_VERBOSE = 0 endif -# Call a source code checker (by default, "sparse") as part of the -# C compilation. -# -# Use 'make C=1' to enable checking of only re-compiled files. -# Use 'make C=2' to enable checking of *all* source files, regardless -# of whether they are re-compiled or not. -# -# See the file "Documentation/sparse.txt" for more details, including -# where to get the "sparse" utility. +ifeq ($(KBUILD_VERBOSE),1) + quiet = + Q = +else + quiet=quiet_ + Q = @ +endif -ifeq ("$(origin C)", "command line") - KBUILD_CHECKSRC = $(C) +# If the user is running make -s (silent mode), suppress echoing of +# commands + +ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 +ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) + quiet=silent_ endif -ifndef KBUILD_CHECKSRC - KBUILD_CHECKSRC = 0 +else # make-3.8x +ifneq ($(filter s% -s%,$(MAKEFLAGS)),) + quiet=silent_ endif - -# Use make M=dir to specify directory of external module to build -# Old syntax make ... SUBDIRS=$PWD is still supported -# Setting the environment variable KBUILD_EXTMOD take precedence -ifdef SUBDIRS - KBUILD_EXTMOD ?= $(SUBDIRS) endif -ifeq ("$(origin M)", "command line") - KBUILD_EXTMOD := $(M) -endif +export quiet Q KBUILD_VERBOSE # kbuild supports saving output files in a separate directory. # To locate output files in a separate directory two syntaxes are supported. @@ -98,7 +110,6 @@ endif # The O= assignment takes precedence over the KBUILD_OUTPUT environment # variable. - # KBUILD_SRC is set on invocation of make in OBJ directory # KBUILD_SRC is not intended to be used by the regular user (for now) ifeq ($(KBUILD_SRC),) @@ -131,10 +142,8 @@ $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make @: sub-make: FORCE - $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ - KBUILD_SRC=$(CURDIR) \ - KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \ - $(filter-out _all sub-make,$(MAKECMDGOALS)) + $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ + -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) # Leave processing to above invocation of make skip-makefile := 1 @@ -144,6 +153,39 @@ endif # ifeq ($(KBUILD_SRC),) # We process the rest of the Makefile if this is the final invocation of make ifeq ($(skip-makefile),) +# Do not print "Entering directory ...", +# but we want to display it when entering to the output directory +# so that IDEs/editors are able to understand relative filenames. +MAKEFLAGS += --no-print-directory + +# Call a source code checker (by default, "sparse") as part of the +# C compilation. +# +# Use 'make C=1' to enable checking of only re-compiled files. +# Use 'make C=2' to enable checking of *all* source files, regardless +# of whether they are re-compiled or not. +# +# See the file "Documentation/sparse.txt" for more details, including +# where to get the "sparse" utility. + +ifeq ("$(origin C)", "command line") + KBUILD_CHECKSRC = $(C) +endif +ifndef KBUILD_CHECKSRC + KBUILD_CHECKSRC = 0 +endif + +# Use make M=dir to specify directory of external module to build +# Old syntax make ... SUBDIRS=$PWD is still supported +# Setting the environment variable KBUILD_EXTMOD take precedence +ifdef SUBDIRS + KBUILD_EXTMOD ?= $(SUBDIRS) +endif + +ifeq ("$(origin M)", "command line") + KBUILD_EXTMOD := $(M) +endif + # If building an external module we do not care about the all: rule # but instead _all depend on modules PHONY += all @@ -153,8 +195,18 @@ else _all: modules endif -srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR)) -objtree := $(CURDIR) +ifeq ($(KBUILD_SRC),) + # building in the source tree + srctree := . +else + ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR))) + # building in a subdirectory of the source tree + srctree := .. + else + srctree := $(KBUILD_SRC) + endif +endif +objtree := . src := $(srctree) obj := $(objtree) @@ -262,52 +314,6 @@ endif export KBUILD_MODULES KBUILD_BUILTIN export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD -# Beautify output -# --------------------------------------------------------------------------- -# -# Normally, we echo the whole command before executing it. By making -# that echo $($(quiet)$(cmd)), we now have the possibility to set -# $(quiet) to choose other forms of output instead, e.g. -# -# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ -# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< -# -# If $(quiet) is empty, the whole command will be printed. -# If it is set to "quiet_", only the short version will be printed. -# If it is set to "silent_", nothing will be printed at all, since -# the variable $(silent_cmd_cc_o_c) doesn't exist. -# -# A simple variant is to prefix commands with $(Q) - that's useful -# for commands that shall be hidden in non-verbose mode. -# -# $(Q)ln $@ :< -# -# If KBUILD_VERBOSE equals 0 then the above command will be hidden. -# If KBUILD_VERBOSE equals 1 then the above command is displayed. - -ifeq ($(KBUILD_VERBOSE),1) - quiet = - Q = -else - quiet=quiet_ - Q = @ -endif - -# If the user is running make -s (silent mode), suppress echoing of -# commands - -ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 -ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) - quiet=silent_ -endif -else # make-3.8x -ifneq ($(filter s% -s%,$(MAKEFLAGS)),) - quiet=silent_ -endif -endif - -export quiet Q KBUILD_VERBOSE - # Look for make include files relative to root of kernel src MAKEFLAGS += --include-dir=$(srctree) @@ -780,6 +786,13 @@ quiet_cmd_pad_cat = CAT $@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ all: $(ALL-y) +ifneq ($(CONFIG_SYS_GENERIC_BOARD),y) + @echo "===================== WARNING ======================" + @echo "Please convert this board to generic board." + @echo "Otherwise it will be removed by the end of 2014." + @echo "See doc/README.generic-board for further information" + @echo "====================================================" +endif PHONY += dtbs dtbs dts/dt.dtb: checkdtc u-boot @@ -827,7 +840,7 @@ u-boot.bin: u-boot FORCE u-boot.ldr: u-boot $(CREATE_LDR_ENV) - $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) + $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS) $(BOARD_SIZE_CHECK) OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex @@ -946,7 +959,8 @@ u-boot-nand.gph: u-boot.bin FORCE ifneq ($(CONFIG_SUNXI),) OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff -u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE +u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin \ + u-boot$(if $(CONFIG_OF_CONTROL),-dtb,).img FORCE $(call if_changed,pad_cat) endif @@ -1219,13 +1233,12 @@ include/license.h: tools/bin2header COPYING # make distclean Remove editor backup files, patch leftover files and the like # Directories & files removed with 'make clean' -CLEAN_DIRS += $(MODVERDIR) -CLEAN_FILES += u-boot.lds include/bmp_logo.h include/bmp_logo_data.h - -# Directories & files removed with 'make clobber' -CLOBBER_DIRS += $(foreach d, spl tpl, $(patsubst %,$d/%, \ +CLEAN_DIRS += $(MODVERDIR) \ + $(foreach d, spl tpl, $(patsubst %,$d/%, \ $(filter-out include, $(shell ls -1 $d 2>/dev/null)))) -CLOBBER_FILES += u-boot* MLO* SPL System.map + +CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \ + u-boot* MLO* SPL System.map # Directories & files removed with 'make mrproper' MRPROPER_DIRS += include/config include/generated spl tpl \ @@ -1258,17 +1271,6 @@ clean: $(clean-dirs) -o -name modules.builtin -o -name '.tmp_*.o.*' \ -o -name '*.gcno' \) -type f -print | xargs rm -f -# clobber -# -clobber: rm-dirs := $(CLOBBER_DIRS) -clobber: rm-files := $(CLOBBER_FILES) - -PHONY += clobber - -clobber: clean - $(call cmd,rmdirs) - $(call cmd,rmfiles) - # mrproper - Delete all generated files, including .config # mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) @@ -1279,7 +1281,7 @@ PHONY += $(mrproper-dirs) mrproper archmrproper $(mrproper-dirs): $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) -mrproper: clobber $(mrproper-dirs) +mrproper: clean $(mrproper-dirs) $(call cmd,rmdirs) $(call cmd,rmfiles) @rm -f arch/*/include/asm/arch @@ -1303,9 +1305,7 @@ backup: help: @echo 'Cleaning targets:' - @echo ' clean - Remove most generated files but keep the config and' - @echo ' necessities for testing u-boot' - @echo ' clobber - Remove most generated files but keep the config' + @echo ' clean - Remove most generated files but keep the config' @echo ' mrproper - Remove all generated files + config + various backup files' @echo ' distclean - mrproper + remove editor backup and patch files' @echo '' @@ -1314,7 +1314,7 @@ help: @echo '' @echo 'Other generic targets:' @echo ' all - Build all necessary images depending on configuration' - @echo ' u-boot - Build the bare u-boot' + @echo '* u-boot - Build the bare u-boot' @echo ' dir/ - Build all files in dir and below' @echo ' dir/file.[oisS] - Build specified target only' @echo ' dir/file.lst - Build specified mixed source/assembly target only' @@ -1322,8 +1322,8 @@ help: @echo ' tags/ctags - Generate ctags file for editors' @echo ' etags - Generate etags file for editors' @echo ' cscope - Generate cscope index' - @echo ' ubootrelease - Output the release version string' - @echo ' ubootversion - Output the version stored in Makefile' + @echo ' ubootrelease - Output the release version string (use with make -s)' + @echo ' ubootversion - Output the version stored in Makefile (use with make -s)' @echo '' @echo 'Static analysers' @echo ' checkstack - Generate a list of stack hogs' @@ -1444,7 +1444,7 @@ endif # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir # Usage: # $(Q)$(MAKE) $(clean)=dir -clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj +clean := -f $(srctree)/scripts/Makefile.clean obj endif # skip-makefile @@ -5012,14 +5012,14 @@ this behavior and build U-Boot to some external directory: make O=/tmp/build NAME_defconfig make O=/tmp/build all -2. Set environment variable BUILD_DIR to point to the desired location: +2. Set environment variable KBUILD_OUTPUT to point to the desired location: - export BUILD_DIR=/tmp/build + export KBUILD_OUTPUT=/tmp/build make distclean make NAME_defconfig make all -Note that the command line "O=" setting overrides the BUILD_DIR environment +Note that the command line "O=" setting overrides the KBUILD_OUTPUT environment variable. diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 171ad03429..79ccc06d5c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -177,10 +177,6 @@ config TARGET_ETHERNUT5 bool "Support ethernut5" select CPU_ARM926EJS -config TARGET_TOP9000 - bool "Support top9000" - select CPU_ARM926EJS - config TARGET_MEESC bool "Support meesc" select CPU_ARM926EJS @@ -631,6 +627,9 @@ config TARGET_HUMMINGBOARD bool "Support hummingboard" select CPU_V7 +config TARGET_KOSAGI_NOVENA + bool "Support Kosagi Novena" + config TARGET_TQMA6 bool "TQ Systems TQMa6 board" select CPU_V7 @@ -667,30 +666,8 @@ config TARGET_SOCFPGA_CYCLONE5 select CPU_V7 select SUPPORT_SPL -config TARGET_SUN4I - bool "Support sun4i" - select CPU_V7 - select SUPPORT_SPL - -config TARGET_SUN5I - bool "Support sun5i" - select CPU_V7 - select SUPPORT_SPL - -config TARGET_SUN6I - bool "Support sun6i" - select CPU_V7 - select SUPPORT_SPL - -config TARGET_SUN7I - bool "Support sun7i" - select CPU_V7 - select SUPPORT_SPL - -config TARGET_SUN8I - bool "Support sun8i" - select CPU_V7 - select SUPPORT_SPL +config ARCH_SUNXI + bool "Support sunxi (Allwinner) SoCs" config TARGET_SNOWBALL bool "Support snowball" @@ -918,6 +895,7 @@ source "board/imx31_phycore/Kconfig" source "board/isee/igep0033/Kconfig" source "board/jornada/Kconfig" source "board/karo/tx25/Kconfig" +source "board/kosagi/novena/Kconfig" source "board/logicpd/imx27lite/Kconfig" source "board/logicpd/imx31_litekit/Kconfig" source "board/maxbcm/Kconfig" @@ -972,4 +950,6 @@ source "board/woodburn/Kconfig" source "board/xaeniax/Kconfig" source "board/zipitz2/Kconfig" +source "arch/arm/Kconfig.debug" + endmenu diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug new file mode 100644 index 0000000000..624bcf4682 --- /dev/null +++ b/arch/arm/Kconfig.debug @@ -0,0 +1,64 @@ +menu "ARM debug" + +config DEBUG_LL + bool "Low-level debugging functions" + depends on !ARM64 + help + Say Y here to include definitions of printascii, printch, printhex + in U-Boot. This is helpful if you are debugging code that + executes before the console is initialized. + +choice + prompt "Low-level debugging port" + depends on DEBUG_LL + + config DEBUG_LL_UART_8250 + bool "Low-level debugging via 8250 UART" + help + Say Y here if you wish the debug print routes to direct + their output to an 8250 UART. You can use this option + to provide the parameters for the 8250 UART rather than + selecting one of the platform specific options above if + you know the parameters for the port. + + This option is preferred over the platform specific + options; the platform specific options are deprecated + and will be soon removed. + +endchoice + +config DEBUG_LL_INCLUDE + string + depends on DEBUG_LL + default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 + default "mach/debug-macro.S" + +# Compatibility options for 8250 +config DEBUG_UART_8250 + bool + +config DEBUG_UART_PHYS + hex "Physical base address of debug UART" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + +# This is not used in U-Boot +config DEBUG_UART_VIRT + hex + default DEBUG_UART_PHYS + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + +config DEBUG_UART_8250_SHIFT + int "Register offset shift for the 8250 debug UART" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + default 2 + +config DEBUG_UART_8250_WORD + bool "Use 32-bit accesses for 8250 UART" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + depends on DEBUG_UART_8250_SHIFT >= 2 + +config DEBUG_UART_8250_FLOW_CONTROL + bool "Enable flow control for 8250 UART" + depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 + +endmenu diff --git a/arch/arm/cpu/arm926ejs/cache.c b/arch/arm/cpu/arm926ejs/cache.c index e86c2edd3b..8d7873c9af 100644 --- a/arch/arm/cpu/arm926ejs/cache.c +++ b/arch/arm/cpu/arm926ejs/cache.c @@ -99,7 +99,4 @@ void flush_cache(unsigned long start, unsigned long size) /* * Stub implementations for l2 cache operations */ -void __l2_cache_disable(void) {} - -void l2_cache_disable(void) - __attribute__((weak, alias("__l2_cache_disable"))); +__weak void l2_cache_disable(void) {} diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c index 365542fe0b..ef130aea42 100644 --- a/arch/arm/cpu/arm926ejs/mxs/mxs.c +++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c @@ -83,7 +83,9 @@ void mx28_fixup_vt(uint32_t start_addr) int i; for (i = 0; i < 8; i++) { + /* cppcheck-suppress nullPointer */ vt[i] = ldr_pc; + /* cppcheck-suppress nullPointer */ vt[i + 8] = start_addr + (4 * i); } } diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c index d3e136991a..d29b9aaf3d 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_boot.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_boot.c @@ -118,6 +118,8 @@ static void mxs_spl_fixup_vectors(void) * fine. */ extern uint32_t _start; + + /* cppcheck-suppress nullPointer */ memcpy(0x0, &_start, 0x60); } diff --git a/arch/arm/cpu/arm926ejs/mxs/timer.c b/arch/arm/cpu/arm926ejs/mxs/timer.c index 99d3fb8731..f2e72257d1 100644 --- a/arch/arm/cpu/arm926ejs/mxs/timer.c +++ b/arch/arm/cpu/arm926ejs/mxs/timer.c @@ -91,6 +91,8 @@ unsigned long long get_ticks(void) TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET; #elif defined(CONFIG_MX28) now = readl(&timrot_regs->hw_timrot_running_count0); +#else +#error "Don't know how to read timrot_regs" #endif if (lastdec >= now) { diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c index 2ce682f6b1..781d83fc72 100644 --- a/arch/arm/cpu/armv7/am33xx/sys_info.c +++ b/arch/arm/cpu/armv7/am33xx/sys_info.c @@ -18,6 +18,7 @@ #include <asm/arch/cpu.h> #include <asm/arch/clock.h> #include <power/tps65910.h> +#include <linux/compiler.h> struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE; @@ -51,11 +52,11 @@ u32 get_cpu_type(void) /** * get_board_rev() - setup to pass kernel board revision information - * returns:(bit[0-3] sub version, higher bit[7-4] is higher version) + * returns: 0 for the ATAG REVISION tag value. */ -u32 get_board_rev(void) +u32 __weak get_board_rev(void) { - return BOARD_REV_ID; + return 0; } /** diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index d200531030..6c9c78c11a 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -312,6 +312,10 @@ static u32 get_ipg_per_clk(void) u32 reg, perclk_podf; reg = __raw_readl(&imx_ccm->cscmr1); +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX)) + if (reg & MXC_CCM_CSCMR1_PER_CLK_SEL_MASK) + return MXC_HCLK; /* OSC 24Mhz */ +#endif perclk_podf = reg & MXC_CCM_CSCMR1_PERCLK_PODF_MASK; return get_ipg_clk() / (perclk_podf + 1); diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index dd5aaa286a..affbf7f702 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -240,6 +240,18 @@ static void clear_mmdc_ch_mask(void) writel(0, &mxc_ccm->ccdr); } +#ifdef CONFIG_MX6SL +static void set_preclk_from_osc(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + u32 reg; + + reg = readl(&mxc_ccm->cscmr1); + reg |= MXC_CCM_CSCMR1_PER_CLK_SEL_MASK; + writel(reg, &mxc_ccm->cscmr1); +} +#endif + int arch_cpu_init(void) { init_aips(); @@ -255,6 +267,11 @@ int arch_cpu_init(void) if (mxc_get_clock(MXC_ARM_CLK) == 396000000) set_ahb_rate(132000000); + /* Set perclk to source from OSC 24MHz */ +#if defined(CONFIG_MX6SL) + set_preclk_from_osc(); +#endif + imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */ #ifdef CONFIG_APBH_DMA diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig index c215404469..a029379a4f 100644 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -22,6 +22,9 @@ config TARGET_CM_T35 bool "CompuLab CM-T3530 and CM-T3730 boards" select SUPPORT_SPL +config TARGET_CM_T3517 + bool "CompuLab CM-T3517 boards" + config TARGET_DEVKIT8000 bool "TimLL OMAP3 Devkit8000" select SUPPORT_SPL @@ -98,6 +101,7 @@ source "board/teejet/mt_ventoux/Kconfig" source "board/ti/sdp3430/Kconfig" source "board/ti/beagle/Kconfig" source "board/compulab/cm_t35/Kconfig" +source "board/compulab/cm_t3517/Kconfig" source "board/timll/devkit8000/Kconfig" source "board/ti/evm/Kconfig" source "board/isee/igep00x0/Kconfig" diff --git a/arch/arm/cpu/armv7/rmobile/Kconfig b/arch/arm/cpu/armv7/rmobile/Kconfig index c46a0cc9b8..8444d4224a 100644 --- a/arch/arm/cpu/armv7/rmobile/Kconfig +++ b/arch/arm/cpu/armv7/rmobile/Kconfig @@ -23,6 +23,11 @@ endchoice config SYS_SOC default "rmobile" +config RMOBILE_EXTRAM_BOOT + bool "Enable boot from RAM" + depends on TARGET_ALT || TARGET_KOELSCH || TARGET_LAGER + default n + source "board/atmark-techno/armadillo-800eva/Kconfig" source "board/renesas/koelsch/Kconfig" source "board/renesas/lager/Kconfig" diff --git a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S index 879e0e097f..d47546a11d 100644 --- a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S +++ b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S @@ -60,17 +60,10 @@ do_lowlevel_init: cmp r1, #3 /* has already been set up */ bicne r0, r0, #0xe7 orrne r0, r0, #0x83 /* L2CTLR[7:6] + L2CTLR[2:0] */ - - ldr r2, =0xFF000044 /* PRR */ - ldr r1, [r2] - and r1, r1, #0x7F00 - lsrs r1, r1, #8 - cmp r1, #0x45 /* 0x45 is ID of r8a7790 */ - bne L2CTLR_5_SKIP +#if defined(CONFIG_R8A7790) orrne r0, r0, #0x20 /* L2CTLR[5] */ -L2CTLR_5_SKIP: +#endif mcrne p15, 1, r0, c9, c0, 2 - _exit_init_l2_a15: ldr r3, =(CONFIG_SYS_INIT_SP_ADDR) sub sp, r3, #4 diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index 24f1daee64..82dbf764e4 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -11,13 +11,13 @@ obj-y += timer.o obj-y += board.o obj-y += clock.o obj-y += pinmux.o -obj-$(CONFIG_SUN6I) += prcm.o -obj-$(CONFIG_SUN8I) += prcm.o -obj-$(CONFIG_SUN4I) += clock_sun4i.o -obj-$(CONFIG_SUN5I) += clock_sun4i.o -obj-$(CONFIG_SUN6I) += clock_sun6i.o -obj-$(CONFIG_SUN7I) += clock_sun4i.o -obj-$(CONFIG_SUN8I) += clock_sun6i.o +obj-$(CONFIG_MACH_SUN6I) += prcm.o +obj-$(CONFIG_MACH_SUN8I) += prcm.o +obj-$(CONFIG_MACH_SUN4I) += clock_sun4i.o +obj-$(CONFIG_MACH_SUN5I) += clock_sun4i.o +obj-$(CONFIG_MACH_SUN6I) += clock_sun6i.o +obj-$(CONFIG_MACH_SUN7I) += clock_sun4i.o +obj-$(CONFIG_MACH_SUN8I) += clock_sun6i.o ifndef CONFIG_SPL_BUILD obj-y += cpu_info.o @@ -27,9 +27,9 @@ endif endif ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_SUN4I) += dram.o -obj-$(CONFIG_SUN5I) += dram.o -obj-$(CONFIG_SUN7I) += dram.o +obj-$(CONFIG_MACH_SUN4I) += dram.o +obj-$(CONFIG_MACH_SUN5I) += dram.o +obj-$(CONFIG_MACH_SUN7I) += dram.o ifdef CONFIG_SPL_FEL obj-y += start.o endif diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c index 06eb6768e8..6c812fc6e9 100644 --- a/arch/arm/cpu/armv7/sunxi/board.c +++ b/arch/arm/cpu/armv7/sunxi/board.c @@ -51,7 +51,7 @@ u32 spl_boot_mode(void) int gpio_init(void) { #if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F) -#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I) /* disable GPB22,23 as uart0 tx,rx to avoid conflict */ sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT); sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT); @@ -59,23 +59,23 @@ int gpio_init(void) sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUNXI_GPF2_UART0_TX); sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF4_UART0_RX); sunxi_gpio_set_pull(SUNXI_GPF(4), 1); -#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I)) +#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)) sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB22_UART0_TX); sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB23_UART0_RX); sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP); -#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN5I) +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN5I) sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN5I_GPB19_UART0_TX); sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN5I_GPB20_UART0_RX); sunxi_gpio_set_pull(SUNXI_GPB(20), SUNXI_GPIO_PULL_UP); -#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_SUN6I) +#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN6I) sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH20_UART0_TX); sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH21_UART0_RX); sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP); -#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_SUN5I) +#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I) sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX); sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX); sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP); -#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_SUN8I) +#elif CONFIG_CONS_INDEX == 5 && defined(CONFIG_MACH_SUN8I) sunxi_gpio_set_cfgpin(SUNXI_GPL(2), SUN8I_GPL2_R_UART_TX); sunxi_gpio_set_cfgpin(SUNXI_GPL(3), SUN8I_GPL3_R_UART_RX); sunxi_gpio_set_pull(SUNXI_GPL(3), SUNXI_GPIO_PULL_UP); @@ -88,7 +88,7 @@ int gpio_init(void) void reset_cpu(ulong addr) { -#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I) static const struct sunxi_wdog *wdog = &((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog; @@ -100,7 +100,7 @@ void reset_cpu(ulong addr) /* sun5i sometimes gets stuck without this */ writel(WDT_MODE_RESET_EN | WDT_MODE_EN, &wdog->mode); } -#else /* CONFIG_SUN6I || CONFIG_SUN8I || .. */ +#else /* CONFIG_MACH_SUN6I || CONFIG_MACH_SUN8I || .. */ static const struct sunxi_wdog *wdog = ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog; @@ -114,8 +114,8 @@ void reset_cpu(ulong addr) /* do some early init */ void s_init(void) { -#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || \ - defined CONFIG_SUN6I || defined CONFIG_SUN8I) +#if !defined CONFIG_SPL_BUILD && (defined CONFIG_MACH_SUN7I || \ + defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I) /* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */ asm volatile( "mrc p15, 0, r0, c1, c0, 1\n" diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c index 4a0d64fb30..a0e49d179f 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c @@ -35,7 +35,7 @@ void clock_init_safe(void) APB0_DIV_1 << APB0_DIV_SHIFT | CPU_CLK_SRC_PLL1 << CPU_CLK_SRC_SHIFT, &ccm->cpu_ahb_apb0_cfg); -#ifdef CONFIG_SUN7I +#ifdef CONFIG_MACH_SUN7I setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_DMA); #endif writel(PLL6_CFG_DEFAULT, &ccm->pll6_cfg); diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c index 4f2a09cd2e..41b9add297 100644 --- a/arch/arm/cpu/armv7/sunxi/cpu_info.c +++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c @@ -13,9 +13,9 @@ #ifdef CONFIG_DISPLAY_CPUINFO int print_cpuinfo(void) { -#ifdef CONFIG_SUN4I +#ifdef CONFIG_MACH_SUN4I puts("CPU: Allwinner A10 (SUN4I)\n"); -#elif defined CONFIG_SUN5I +#elif defined CONFIG_MACH_SUN5I u32 val = readl(SUNXI_SID_BASE + 0x08); switch ((val >> 12) & 0xf) { case 0: puts("CPU: Allwinner A12 (SUN5I)\n"); break; @@ -23,11 +23,11 @@ int print_cpuinfo(void) case 7: puts("CPU: Allwinner A10s (SUN5I)\n"); break; default: puts("CPU: Allwinner A1X (SUN5I)\n"); } -#elif defined CONFIG_SUN6I +#elif defined CONFIG_MACH_SUN6I puts("CPU: Allwinner A31 (SUN6I)\n"); -#elif defined CONFIG_SUN7I +#elif defined CONFIG_MACH_SUN7I puts("CPU: Allwinner A20 (SUN7I)\n"); -#elif defined CONFIG_SUN8I +#elif defined CONFIG_MACH_SUN8I puts("CPU: Allwinner A23 (SUN8I)\n"); #else #warning Please update cpu_info.c with correct CPU information diff --git a/arch/arm/cpu/armv7/sunxi/dram.c b/arch/arm/cpu/armv7/sunxi/dram.c index 3cf3cbf19a..dc9fdb930b 100644 --- a/arch/arm/cpu/armv7/sunxi/dram.c +++ b/arch/arm/cpu/armv7/sunxi/dram.c @@ -74,7 +74,7 @@ static void mctl_ddr3_reset(void) struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -#ifdef CONFIG_SUN4I +#ifdef CONFIG_MACH_SUN4I struct sunxi_timer_reg *timer = (struct sunxi_timer_reg *)SUNXI_TIMER_BASE; u32 reg_val; @@ -113,7 +113,7 @@ static void mctl_set_drive(void) { struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; -#ifdef CONFIG_SUN7I +#ifdef CONFIG_MACH_SUN7I clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3) | (0x3 << 28), #else clrsetbits_le32(&dram->mcr, DRAM_MCR_MODE_NORM(0x3), @@ -202,7 +202,7 @@ static void mctl_enable_dllx(u32 phase) } static u32 hpcr_value[32] = { -#ifdef CONFIG_SUN5I +#ifdef CONFIG_MACH_SUN5I 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, @@ -212,7 +212,7 @@ static u32 hpcr_value[32] = { 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0 #endif -#ifdef CONFIG_SUN4I +#ifdef CONFIG_MACH_SUN4I 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0, 0, 0, 0, 0, 0, @@ -222,7 +222,7 @@ static u32 hpcr_value[32] = { 0x1035, 0x1031, 0x0731, 0x1035, 0x1031, 0x0301, 0x0301, 0x0731 #endif -#ifdef CONFIG_SUN7I +#ifdef CONFIG_MACH_SUN7I 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0x0301, 0, 0, 0, 0, @@ -304,7 +304,7 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) setbits_le32(&ccm->pll5_cfg, CCM_PLL5_CTRL_DDR_CLK); -#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I) /* reset GPS */ clrbits_le32(&ccm->gps_clk_cfg, CCM_GPS_CTRL_RESET | CCM_GPS_CTRL_GATE); setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_GPS); @@ -318,7 +318,7 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) /* PLL5P and PLL6 are the potential clock sources for MBUS */ pll6x_clk = clock_get_pll6() / 1000000; -#ifdef CONFIG_SUN7I +#ifdef CONFIG_MACH_SUN7I pll6x_clk *= 2; /* sun7i uses PLL6*2, sun5i uses just PLL6 */ #endif pll5p_clk = clock_get_pll5p() / 1000000; @@ -348,7 +348,7 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) * open DRAMC AHB & DLL register clock * close it first */ -#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I) clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL); #else clrbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM); @@ -356,7 +356,7 @@ static void mctl_setup_dram_clock(u32 clk, u32 mbus_clk) udelay(22); /* then open it */ -#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I) setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM | CCM_AHB_GATE_DLL); #else setbits_le32(&ccm->ahb_gate0, CCM_AHB_GATE_SDRAM); @@ -417,7 +417,7 @@ static int dramc_scan_readpipe(void) static void dramc_clock_output_en(u32 on) { -#if defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I) struct sunxi_dram_reg *dram = (struct sunxi_dram_reg *)SUNXI_DRAMC_BASE; if (on) @@ -425,7 +425,7 @@ static void dramc_clock_output_en(u32 on) else clrbits_le32(&dram->mcr, DRAM_MCR_DCLK_OUT); #endif -#ifdef CONFIG_SUN4I +#ifdef CONFIG_MACH_SUN4I struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; if (on) setbits_le32(&ccm->dram_clk_cfg, CCM_DRAM_CTRL_DCLK_OUT); @@ -527,7 +527,7 @@ static void mctl_set_impedance(u32 zq, u32 odt_en) u32 reg_val; u32 zprog = zq & 0xFF, zdata = (zq >> 8) & 0xFFFFF; -#ifndef CONFIG_SUN7I +#ifndef CONFIG_MACH_SUN7I /* Appears that some kind of automatically initiated default * ZQ calibration is already in progress at this point on sun4i/sun5i * hardware, but not on sun7i. So it is reasonable to wait for its @@ -539,7 +539,7 @@ static void mctl_set_impedance(u32 zq, u32 odt_en) if (!odt_en) return; -#ifdef CONFIG_SUN7I +#ifdef CONFIG_MACH_SUN7I /* Enabling ODT in SDR_IOCR on sun7i hardware results in a deadlock * unless bit 24 is set in SDR_ZQCR1. Not much is known about the * SDR_ZQCR1 register, but there are hints indicating that it might @@ -597,7 +597,7 @@ static unsigned long dramc_init_helper(struct dram_para *para) /* dram clock off */ dramc_clock_output_en(0); -#ifdef CONFIG_SUN4I +#ifdef CONFIG_MACH_SUN4I /* select dram controller 1 */ writel(DRAM_CSEL_MAGIC, &dram->csel); #endif @@ -654,7 +654,7 @@ static unsigned long dramc_init_helper(struct dram_para *para) writel(para->tpr2, &dram->tpr2); reg_val = DRAM_MR_BURST_LENGTH(0x0); -#if (defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)) +#if (defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)) reg_val |= DRAM_MR_POWER_DOWN; #endif reg_val |= DRAM_MR_CAS_LAT(para->cas - 4); @@ -668,7 +668,7 @@ static unsigned long dramc_init_helper(struct dram_para *para) /* disable drift compensation and set passive DQS window mode */ clrsetbits_le32(&dram->ccr, DRAM_CCR_DQS_DRIFT_COMP, DRAM_CCR_DQS_GATE); -#ifdef CONFIG_SUN7I +#ifdef CONFIG_MACH_SUN7I /* Command rate timing mode 2T & 1T */ if (para->tpr4 & 0x1) setbits_le32(&dram->ccr, DRAM_CCR_COMMAND_RATE_1T); @@ -718,7 +718,7 @@ unsigned long dramc_init(struct dram_para *para) /* try to autodetect the DRAM bus width and density */ para->io_width = 16; para->bus_width = 32; -#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) /* only A0-A14 address lines on A10/A13, limiting max density to 4096 */ para->density = 4096; #else diff --git a/arch/arm/cpu/armv7/sunxi/pinmux.c b/arch/arm/cpu/armv7/sunxi/pinmux.c index 1f2843fcac..b026f78ca5 100644 --- a/arch/arm/cpu/armv7/sunxi/pinmux.c +++ b/arch/arm/cpu/armv7/sunxi/pinmux.c @@ -10,32 +10,42 @@ #include <asm/io.h> #include <asm/arch/gpio.h> -int sunxi_gpio_set_cfgpin(u32 pin, u32 val) +void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val) { - u32 bank = GPIO_BANK(pin); - u32 index = GPIO_CFG_INDEX(pin); - u32 offset = GPIO_CFG_OFFSET(pin); - struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + u32 index = GPIO_CFG_INDEX(bank_offset); + u32 offset = GPIO_CFG_OFFSET(bank_offset); clrsetbits_le32(&pio->cfg[0] + index, 0xf << offset, val << offset); - - return 0; } -int sunxi_gpio_get_cfgpin(u32 pin) +void sunxi_gpio_set_cfgpin(u32 pin, u32 val) { - u32 cfg; u32 bank = GPIO_BANK(pin); - u32 index = GPIO_CFG_INDEX(pin); - u32 offset = GPIO_CFG_OFFSET(pin); struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + sunxi_gpio_set_cfgbank(pio, pin, val); +} + +int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset) +{ + u32 index = GPIO_CFG_INDEX(bank_offset); + u32 offset = GPIO_CFG_OFFSET(bank_offset); + u32 cfg; + cfg = readl(&pio->cfg[0] + index); cfg >>= offset; return cfg & 0xf; } +int sunxi_gpio_get_cfgpin(u32 pin) +{ + u32 bank = GPIO_BANK(pin); + struct sunxi_gpio *pio = BANK_TO_GPIO(bank); + + return sunxi_gpio_get_cfgbank(pio, pin); +} + int sunxi_gpio_set_drv(u32 pin, u32 val) { u32 bank = GPIO_BANK(pin); diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig index 524b193e58..36b7f11fbe 100644 --- a/arch/arm/cpu/armv7/uniphier/Kconfig +++ b/arch/arm/cpu/armv7/uniphier/Kconfig @@ -23,4 +23,40 @@ config MACH_PH1_SLD8 endchoice +config CMD_PINMON + bool "Enable boot mode pins monitor command" + depends on !SPL_BUILD + default y + help + The command "pinmon" shows the state of the boot mode pins. + The boot mode pins are latched when the system reset is deasserted + and determine which device the system should load a boot image from. + +config SOC_INIT + bool + default SPL_BUILD + +config DRAM_INIT + bool + default SPL_BUILD + +choice + prompt "DDR3 Frequency select" + depends on DRAM_INIT + +config DDR_FREQ_1600 + bool "DDR3 1600" + depends on MACH_PH1_PRO4 || MACH_PH1_LD4 + +config DDR_FREQ_1333 + bool "DDR3 1333" + depends on MACH_PH1_LD4 || MACH_PH1_SLD8 + +endchoice + +config DDR_FREQ + int + default 1333 if DDR_FREQ_1333 + default 1600 if DDR_FREQ_1600 + endmenu diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile index 7cedddaadc..0f64d2591c 100644 --- a/arch/arm/cpu/armv7/uniphier/Makefile +++ b/arch/arm/cpu/armv7/uniphier/Makefile @@ -8,11 +8,12 @@ obj-$(CONFIG_SPL_BUILD) += spl.o obj-y += timer.o obj-y += reset.o obj-y += cache_uniphier.o +obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o obj-y += dram_init.o obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o obj-$(CONFIG_UNIPHIER_SMP) += smp.o -obj-$(if $(CONFIG_SPL_BUILD),,y) += cmd_pinmon.o +obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o obj-y += board_common.o obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/board_postclk_init.c b/arch/arm/cpu/armv7/uniphier/board_postclk_init.c index 4302277dfc..89e44bb95b 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/board_postclk_init.c +++ b/arch/arm/cpu/armv7/uniphier/board_postclk_init.c @@ -5,11 +5,13 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <common.h> +#include <linux/compiler.h> #include <asm/arch/led.h> #include <asm/arch/board.h> -void bcu_init(void); +void __weak bcu_init(void) +{ +}; void sbc_init(void); void sg_init(void); void pll_init(void); @@ -18,12 +20,15 @@ void clkrst_init(void); int board_postclk_init(void) { +#ifdef CONFIG_SOC_INIT bcu_init(); sbc_init(); sg_init(); + uniphier_board_reset(); + pll_init(); uniphier_board_init(); @@ -33,7 +38,7 @@ int board_postclk_init(void) clkrst_init(); led_write(B, 2, , ); - +#endif pin_init(); led_write(B, 3, , ); diff --git a/arch/arm/cpu/armv7/uniphier/dram_init.c b/arch/arm/cpu/armv7/uniphier/dram_init.c index 5465a0e6bf..7de657b7af 100644 --- a/arch/arm/cpu/armv7/uniphier/dram_init.c +++ b/arch/arm/cpu/armv7/uniphier/dram_init.c @@ -16,7 +16,7 @@ int dram_init(void) DECLARE_GLOBAL_DATA_PTR; gd->ram_size = CONFIG_SYS_SDRAM_SIZE; -#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) +#ifdef CONFIG_DRAM_INIT led_write(B, 4, , ); { diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile index 781b511a97..fba1cc7498 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-y += platdevice.o obj-y += boot-mode.o -obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \ - sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o -obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \ - umc_init.o +obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ + clkrst_init.o +obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o +obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c index 0047223181..62f5b0148d 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c @@ -13,3 +13,16 @@ SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) + +/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ +struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { + { + .base = 0x5a800100, + }, + { + .base = 0x5a810100, + }, + { + .base = 0x5a820100, + }, +}; diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c index 1344ac1caa..ebcbaabf65 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/umc_init.c @@ -149,10 +149,6 @@ int umc_init(void) CONFIG_SDRAM1_SIZE / 0x08000000); } -#if CONFIG_DDR_FREQ != 1333 && CONFIG_DDR_FREQ != 1600 -#error Unsupported DDR Frequency. -#endif - #if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile index e11f4f6d8b..74129bc86a 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile @@ -5,7 +5,6 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-y += platdevice.o obj-y += boot-mode.o -obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o sbc_init.o \ - sg_init.o pll_init.o clkrst_init.o pinctrl.o -obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \ - umc_init.o +obj-$(CONFIG_SOC_INIT) += sbc_init.o sg_init.o pll_init.o clkrst_init.o +obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o +obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c deleted file mode 100644 index 7198829988..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/board_postclk_init.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2012-2014 Panasonic Corporation - * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/led.h> -#include <asm/arch/board.h> - -void sbc_init(void); -void sg_init(void); -void pll_init(void); -void pin_init(void); -void clkrst_init(void); - -int board_postclk_init(void) -{ - sbc_init(); - - sg_init(); - - pll_init(); - - uniphier_board_init(); - - led_write(B, 1, , ); - - clkrst_init(); - - led_write(B, 2, , ); - - pin_init(); - - led_write(B, 3, , ); - - return 0; -} diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c index 503c247d6b..4e3d47615b 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/pinctrl.c @@ -41,5 +41,12 @@ void pin_init(void) sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */ #endif +#ifdef CONFIG_USB_EHCI_UNIPHIER + sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */ + sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */ + sg_set_pinsel(187, 0); /* USB3VBUS -> USB3VBUS */ + sg_set_pinsel(188, 0); /* USB3OD -> USB3OD */ +#endif + writel(1, SG_LOADPINCTRL); } diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c index 6da921e920..1843d0469f 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c @@ -13,3 +13,13 @@ SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) + +/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ +struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { + { + .base = 0x5a800100, + }, + { + .base = 0x5a810100, + }, +}; diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c index dd462875bb..328b2f4d9a 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/umc_init.c @@ -122,10 +122,6 @@ int umc_init(void) CONFIG_SDRAM1_SIZE / 0x08000000); } -#if CONFIG_DDR_FREQ != 1600 -#error Unsupported DDR frequency. -#endif - #if ((CONFIG_SDRAM0_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH0 == 2) || \ (CONFIG_SDRAM0_SIZE == 0x10000000 && CONFIG_DDR_NUM_CH0 == 1)) && \ ((CONFIG_SDRAM1_SIZE == 0x20000000 && CONFIG_DDR_NUM_CH1 == 2) || \ diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile index 781b511a97..fba1cc7498 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o obj-y += platdevice.o obj-y += boot-mode.o -obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \ - sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o -obj-$(CONFIG_SPL_BUILD) += pll_spectrum.o \ - umc_init.o +obj-$(CONFIG_SOC_INIT) += bcu_init.o sbc_init.o sg_init.o pll_init.o \ + clkrst_init.o +obj-$(CONFIG_BOARD_POSTCLK_INIT) += pinctrl.o +obj-$(CONFIG_DRAM_INIT) += pll_spectrum.o umc_init.o diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_postclk_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_postclk_init.c deleted file mode 100644 index 287b33c21d..0000000000 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/board_postclk_init.c +++ /dev/null @@ -1 +0,0 @@ -#include "../ph1-ld4/board_postclk_init.c" diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c index 59d054a310..72ec599f69 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c @@ -13,3 +13,16 @@ SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK) SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK) SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK) SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK) + +/* USB : TODO for Masahiro Yamada: move base address to Device Tree */ +struct uniphier_ehci_platform_data uniphier_ehci_platdata[] = { + { + .base = 0x5a800100, + }, + { + .base = 0x5a810100, + }, + { + .base = 0x5a820100, + }, +}; diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c index ff2dcb1640..a44f999fbf 100644 --- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c +++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/umc_init.c @@ -129,10 +129,6 @@ int umc_init(void) CONFIG_SDRAM1_SIZE / 0x08000000); } -#if CONFIG_DDR_FREQ != 1333 -#error Unsupported DDR frequency. -#endif - #if (CONFIG_SDRAM0_SIZE == 0x08000000 || CONFIG_SDRAM0_SIZE == 0x10000000) && \ (CONFIG_SDRAM1_SIZE == 0x08000000 || CONFIG_SDRAM1_SIZE == 0x10000000) && \ CONFIG_DDR_NUM_CH0 == 1 && CONFIG_DDR_NUM_CH1 == 1 diff --git a/arch/arm/cpu/armv7/uniphier/reset.c b/arch/arm/cpu/armv7/uniphier/reset.c index b0dc9673b4..50d1fed647 100644 --- a/arch/arm/cpu/armv7/uniphier/reset.c +++ b/arch/arm/cpu/armv7/uniphier/reset.c @@ -8,14 +8,11 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/sc-regs.h> -#include <asm/arch/board.h> void reset_cpu(unsigned long ignored) { u32 tmp; - uniphier_board_reset(); - writel(5, SC_IRQTIMSET); /* default value */ tmp = readl(SC_SLFRSTSEL); diff --git a/arch/arm/cpu/armv7/zynq/ddrc.c b/arch/arm/cpu/armv7/zynq/ddrc.c index 1ea086d520..d74f8dbbc4 100644 --- a/arch/arm/cpu/armv7/zynq/ddrc.c +++ b/arch/arm/cpu/armv7/zynq/ddrc.c @@ -40,6 +40,7 @@ void zynq_ddrc_init(void) * first stage bootloader. To get ECC to work all memory has * been initialized by writing any value. */ + /* cppcheck-suppress nullPointer */ memset((void *)0, 0, 1 * 1024 * 1024); } else { puts("ECC disabled "); diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index d6d19167f6..b946abe7c3 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1,3 +1,4 @@ +dtb-$(CONFIG_MACH_SUN7I) += sun7i-a20-pcduino3.dtb dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \ diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts new file mode 100644 index 0000000000..f7cc8e7a09 --- /dev/null +++ b/arch/arm/dts/sun7i-a20-pcduino3.dts @@ -0,0 +1,177 @@ +/* + * Copyright 2014 Zoltan HERPAI + * Zoltan HERPAI <wigyori@uid0.hu> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "LinkSprite pcDuino3"; + compatible = "linksprite,pcduino3", "allwinner,sun7i-a20"; + + chosen { + stdout-path = &uart0; + }; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + ahci_pwr_pin_a: ahci_pwr_pin@0 { + allwinner,pins = "PH2"; + }; + + led_pins_pcduino3: led_pins@0 { + allwinner,pins = "PH15", "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + key_pins_pcduino3: key_pins@0 { + allwinner,pins = "PH17", "PH18", "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_pcduino3>; + + tx { + label = "pcduino3:green:tx"; + gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; + }; + + rx { + label = "pcduino3:green:rx"; + gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_pcduino3>; + #address-cells = <1>; + #size-cells = <0>; + button@0 { + label = "Key Back"; + linux,code = <KEY_BACK>; + gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; + }; + button@1 { + label = "Key Home"; + linux,code = <KEY_HOME>; + gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; + }; + button@2 { + label = "Key Menu"; + linux,code = <KEY_MENU>; + gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_ahci_5v: ahci-5v { + gpio = <&pio 7 2 0>; + status = "okay"; + }; +}; diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi new file mode 100644 index 0000000000..4011628c73 --- /dev/null +++ b/arch/arm/dts/sun7i-a20.dtsi @@ -0,0 +1,988 @@ +/* + * Copyright 2013 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + ethernet0 = &gmac; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + serial7 = &uart7; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; + interrupts = <0 120 4>, + <0 121 4>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-osc-clk"; + reg = <0x01c20050 0x4>; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: clk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + pll1: clk@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + pll4: clk@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-pll4-clk"; + reg = <0x01c20018 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll4"; + }; + + pll5: clk@01c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + + pll6: clk@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; + }; + + pll8: clk@01c20040 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-pll4-clk"; + reg = <0x01c20040 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll8"; + }; + + cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>; + clock-output-names = "cpu"; + }; + + axi: axi@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-axi-clk"; + reg = <0x01c20054 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + ahb: ahb@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>; + clock-output-names = "ahb"; + }; + + ahb_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun7i-a20-ahb-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb>; + clock-output-names = "ahb_usb0", "ahb_ehci0", + "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", + "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", + "ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms", + "ahb_nand", "ahb_sdram", "ahb_ace", + "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1", + "ahb_spi2", "ahb_spi3", "ahb_sata", + "ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0", + "ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0", + "ahb_csi1", "ahb_hdmi1", "ahb_hdmi0", + "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0", + "ahb_de_fe1", "ahb_gmac", "ahb_mp", + "ahb_mali"; + }; + + apb0: apb0@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb>; + clock-output-names = "apb0"; + }; + + apb0_gates: clk@01c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun7i-a20-apb0-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb0>; + clock-output-names = "apb0_codec", "apb0_spdif", + "apb0_ac97", "apb0_iis0", "apb0_iis1", + "apb0_pio", "apb0_ir0", "apb0_ir1", + "apb0_iis2", "apb0_keypad"; + }; + + apb1_mux: apb1_mux@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-mux-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; + clock-output-names = "apb1_mux"; + }; + + apb1: apb1@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb1_mux>; + clock-output-names = "apb1"; + }; + + apb1_gates: clk@01c2006c { + #clock-cells = <1>; + compatible = "allwinner,sun7i-a20-apb1-gates-clk"; + reg = <0x01c2006c 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_i2c0", "apb1_i2c1", + "apb1_i2c2", "apb1_i2c3", "apb1_can", + "apb1_scr", "apb1_ps20", "apb1_ps21", + "apb1_i2c4", "apb1_uart0", "apb1_uart1", + "apb1_uart2", "apb1_uart3", "apb1_uart4", + "apb1_uart5", "apb1_uart6", "apb1_uart7"; + }; + + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + ms_clk: clk@01c20084 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20084 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ms"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc2"; + }; + + mmc3_clk: clk@01c20094 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20094 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc3"; + }; + + ts_clk: clk@01c20098 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20098 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ts"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ss"; + }; + + spi0_clk: clk@01c200a0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi0"; + }; + + spi1_clk: clk@01c200a4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi1"; + }; + + spi2_clk: clk@01c200a8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a8 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi2"; + }; + + pata_clk: clk@01c200ac { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200ac 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "pata"; + }; + + ir0_clk: clk@01c200b0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200b0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir0"; + }; + + ir1_clk: clk@01c200b4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200b4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir1"; + }; + + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&pll6 1>; + clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; + }; + + spi3_clk: clk@01c200d4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200d4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi3"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 2>, <&pll5 1>; + clock-output-names = "mbus"; + }; + + /* + * The following two are dummy clocks, placeholders used in the gmac_tx + * clock. The gmac driver will choose one parent depending on the PHY + * interface mode, using clk_set_rate auto-reparenting. + * The actual TX clock rate is not controlled by the gmac_tx clock. + */ + mii_phy_tx_clk: clk@2 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "mii_phy_tx"; + }; + + gmac_int_tx_clk: clk@3 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_int_tx"; + }; + + gmac_tx_clk: clk@01c20164 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-gmac-clk"; + reg = <0x01c20164 0x4>; + clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; + clock-output-names = "gmac_tx"; + }; + + /* + * Dummy clock used by output clocks + */ + osc24M_32k: clk@1 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <750>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc24M_32k"; + }; + + clk_out_a: clk@01c201f0 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-out-clk"; + reg = <0x01c201f0 0x4>; + clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; + clock-output-names = "clk_out_a"; + }; + + clk_out_b: clk@01c201f4 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-out-clk"; + reg = <0x01c201f4 0x4>; + clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; + clock-output-names = "clk_out_b"; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + nmi_intc: interrupt-controller@01c00030 { + compatible = "allwinner,sun7i-a20-sc-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01c00030 0x0c>; + interrupts = <0 0 4>; + }; + + spi0: spi@01c05000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c05000 0x1000>; + interrupts = <0 10 4>; + clocks = <&ahb_gates 20>, <&spi0_clk>; + clock-names = "ahb", "mod"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@01c06000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <0 11 4>; + clocks = <&ahb_gates 21>, <&spi1_clk>; + clock-names = "ahb", "mod"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + emac: ethernet@01c0b000 { + compatible = "allwinner,sun4i-a10-emac"; + reg = <0x01c0b000 0x1000>; + interrupts = <0 55 4>; + clocks = <&ahb_gates 17>; + status = "disabled"; + }; + + mdio@01c0b080 { + compatible = "allwinner,sun4i-a10-mdio"; + reg = <0x01c0b080 0x14>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, <&mmc0_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 32 4>; + status = "disabled"; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, <&mmc1_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 33 4>; + status = "disabled"; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, <&mmc2_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 34 4>; + status = "disabled"; + }; + + mmc3: mmc@01c12000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c12000 0x1000>; + clocks = <&ahb_gates 11>, <&mmc3_clk>; + clock-names = "ahb", "mmc"; + interrupts = <0 35 4>; + status = "disabled"; + }; + + usbphy: phy@01c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun7i-a20-usb-phy"; + reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; + reg-names = "phy_ctrl", "pmu1", "pmu2"; + clocks = <&usb_clk 8>; + clock-names = "usb_phy"; + resets = <&usb_clk 1>, <&usb_clk 2>; + reset-names = "usb1_reset", "usb2_reset"; + status = "disabled"; + }; + + ehci0: usb@01c14000 { + compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; + reg = <0x01c14000 0x100>; + interrupts = <0 39 4>; + clocks = <&ahb_gates 1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@01c14400 { + compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; + reg = <0x01c14400 0x100>; + interrupts = <0 64 4>; + clocks = <&usb_clk 6>, <&ahb_gates 2>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + spi2: spi@01c17000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c17000 0x1000>; + interrupts = <0 12 4>; + clocks = <&ahb_gates 22>, <&spi2_clk>; + clock-names = "ahb", "mod"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + ahci: sata@01c18000 { + compatible = "allwinner,sun4i-a10-ahci"; + reg = <0x01c18000 0x1000>; + interrupts = <0 56 4>; + clocks = <&pll6 0>, <&ahb_gates 25>; + status = "disabled"; + }; + + ehci1: usb@01c1c000 { + compatible = "allwinner,sun7i-a20-ehci", "generic-ehci"; + reg = <0x01c1c000 0x100>; + interrupts = <0 40 4>; + clocks = <&ahb_gates 3>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@01c1c400 { + compatible = "allwinner,sun7i-a20-ohci", "generic-ohci"; + reg = <0x01c1c400 0x100>; + interrupts = <0 65 4>; + clocks = <&usb_clk 7>, <&ahb_gates 4>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + spi3: spi@01c1f000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c1f000 0x1000>; + interrupts = <0 50 4>; + clocks = <&ahb_gates 23>, <&spi3_clk>; + clock-names = "ahb", "mod"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + pio: pinctrl@01c20800 { + compatible = "allwinner,sun7i-a20-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <0 28 4>; + clocks = <&apb0_gates 5>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + #size-cells = <0>; + #gpio-cells = <3>; + + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PB22", "PB23"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart2_pins_a: uart2@0 { + allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,function = "uart2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart6_pins_a: uart6@0 { + allwinner,pins = "PI12", "PI13"; + allwinner,function = "uart6"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart7_pins_a: uart7@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "uart7"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB18", "PB19"; + allwinner,function = "i2c1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB20", "PB21"; + allwinner,function = "i2c2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + clk_out_a_pins_a: clk_out_a@0 { + allwinner,pins = "PI12"; + allwinner,function = "clk_out_a"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + clk_out_b_pins_a: clk_out_b@0 { + allwinner,pins = "PI13"; + allwinner,function = "clk_out_b"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + gmac_pins_mii_a: gmac_mii@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "gmac"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + gmac_pins_rgmii_a: gmac_rgmii@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA10", + "PA11", "PA12", "PA13", + "PA15", "PA16"; + allwinner,function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + allwinner,drive = <3>; + allwinner,pull = <0>; + }; + + spi1_pins_a: spi1@0 { + allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,function = "spi1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + spi2_pins_a: spi2@0 { + allwinner,pins = "PC19", "PC20", "PC21", "PC22"; + allwinner,function = "spi2"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + mmc3_pins_a: mmc3@0 { + allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; + allwinner,function = "mmc3"; + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + ir0_pins_a: ir0@0 { + allwinner,pins = "PB3","PB4"; + allwinner,function = "ir0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + ir1_pins_a: ir1@0 { + allwinner,pins = "PB22","PB23"; + allwinner,function = "ir1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <0 22 4>, + <0 23 4>, + <0 24 4>, + <0 25 4>, + <0 67 4>, + <0 68 4>; + clocks = <&osc24M>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sun4i-a10-wdt"; + reg = <0x01c20c90 0x10>; + }; + + rtc: rtc@01c20d00 { + compatible = "allwinner,sun7i-a20-rtc"; + reg = <0x01c20d00 0x20>; + interrupts = <0 24 4>; + }; + + pwm: pwm@01c20e00 { + compatible = "allwinner,sun7i-a20-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + + ir0: ir@01c21800 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 6>, <&ir0_clk>; + clock-names = "apb", "ir"; + interrupts = <0 5 4>; + reg = <0x01c21800 0x40>; + status = "disabled"; + }; + + ir1: ir@01c21c00 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 7>, <&ir1_clk>; + clock-names = "apb", "ir"; + interrupts = <0 6 4>; + reg = <0x01c21c00 0x40>; + status = "disabled"; + }; + + sid: eeprom@01c23800 { + compatible = "allwinner,sun7i-a20-sid"; + reg = <0x01c23800 0x200>; + }; + + rtp: rtp@01c25000 { + compatible = "allwinner,sun4i-a10-ts"; + reg = <0x01c25000 0x100>; + interrupts = <0 29 4>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <0 1 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 16>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <0 2 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 17>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <0 3 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 18>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <0 4 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 19>; + status = "disabled"; + }; + + uart4: serial@01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <0 17 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 20>; + status = "disabled"; + }; + + uart5: serial@01c29400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29400 0x400>; + interrupts = <0 18 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 21>; + status = "disabled"; + }; + + uart6: serial@01c29800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29800 0x400>; + interrupts = <0 19 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 22>; + status = "disabled"; + }; + + uart7: serial@01c29c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29c00 0x400>; + interrupts = <0 20 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 23>; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <0 7 4>; + clocks = <&apb1_gates 0>; + clock-frequency = <100000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <0 8 4>; + clocks = <&apb1_gates 1>; + clock-frequency = <100000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <0 9 4>; + clocks = <&apb1_gates 2>; + clock-frequency = <100000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@01c2b800 { + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + reg = <0x01c2b800 0x400>; + interrupts = <0 88 4>; + clocks = <&apb1_gates 3>; + clock-frequency = <100000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c4: i2c@01c2c000 { + compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + reg = <0x01c2c000 0x400>; + interrupts = <0 89 4>; + clocks = <&apb1_gates 15>; + clock-frequency = <100000>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gmac: ethernet@01c50000 { + compatible = "allwinner,sun7i-a20-gmac"; + reg = <0x01c50000 0x10000>; + interrupts = <0 85 4>; + interrupt-names = "macirq"; + clocks = <&ahb_gates 49>, <&gmac_tx_clk>; + clock-names = "stmmaceth", "allwinner_gmac_tx"; + snps,pbl = <2>; + snps,fixed-burst; + snps,force_sf_dma_mode; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + hstimer@01c60000 { + compatible = "allwinner,sun7i-a20-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <0 81 4>, + <0 82 4>, + <0 83 4>, + <0 84 4>; + clocks = <&ahb_gates 28>; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 0xf04>; + }; + }; +}; diff --git a/arch/arm/dts/sunxi-common-regulators.dtsi b/arch/arm/dts/sunxi-common-regulators.dtsi new file mode 100644 index 0000000000..3d021efd1a --- /dev/null +++ b/arch/arm/dts/sunxi-common-regulators.dtsi @@ -0,0 +1,89 @@ +/* + * sunxi boards common regulator (ahci target power supply, usb-vbus) code + * + * Copyright 2014 - Hans de Goede <hdegoede@redhat.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + soc@01c00000 { + pio: pinctrl@01c20800 { + ahci_pwr_pin_a: ahci_pwr_pin@0 { + allwinner,pins = "PB8"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + usb1_vbus_pin_a: usb1_vbus_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + usb2_vbus_pin_a: usb2_vbus_pin@0 { + allwinner,pins = "PH3"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + }; + + reg_ahci_5v: ahci-5v { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&ahci_pwr_pin_a>; + regulator-name = "ahci-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 1 8 0>; + status = "disabled"; + }; + + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_a>; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 6 0>; + status = "disabled"; + }; + + reg_usb2_vbus: usb2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_pin_a>; + regulator-name = "usb2-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 3 0>; + status = "disabled"; + }; + + reg_vcc3v0: vcc3v0 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c index 22cd11aa04..e88e6e2a98 100644 --- a/arch/arm/imx-common/iomux-v3.c +++ b/arch/arm/imx-common/iomux-v3.c @@ -77,3 +77,18 @@ void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, p += stride; } } + +void imx_iomux_set_gpr_register(int group, int start_bit, + int num_bits, int value) +{ + int i = 0; + u32 reg; + reg = readl(base + group * 4); + while (num_bits) { + reg &= ~(1<<(start_bit + i)); + i++; + num_bits--; + } + reg |= (value << start_bit); + writel(reg, base + group * 4); +} diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c index c63f78f682..65ef60bf2e 100644 --- a/arch/arm/imx-common/timer.c +++ b/arch/arm/imx-common/timer.c @@ -12,6 +12,7 @@ #include <div64.h> #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> /* General purpose timers registers */ struct mxc_gpt { @@ -26,23 +27,59 @@ static struct mxc_gpt *cur_gpt = (struct mxc_gpt *)GPT1_BASE_ADDR; /* General purpose timers bitfields */ #define GPTCR_SWR (1 << 15) /* Software reset */ +#define GPTCR_24MEN (1 << 10) /* Enable 24MHz clock input */ #define GPTCR_FRR (1 << 9) /* Freerun / restart */ -#define GPTCR_CLKSOURCE_32 (4 << 6) /* Clock source */ +#define GPTCR_CLKSOURCE_32 (4 << 6) /* Clock source 32khz */ +#define GPTCR_CLKSOURCE_OSC (5 << 6) /* Clock source OSC */ +#define GPTCR_CLKSOURCE_PRE (1 << 6) /* Clock source PRECLK */ +#define GPTCR_CLKSOURCE_MASK (0x7 << 6) #define GPTCR_TEN 1 /* Timer enable */ +#define GPTPR_PRESCALER24M_SHIFT 12 +#define GPTPR_PRESCALER24M_MASK (0xF << GPTPR_PRESCALER24M_SHIFT) + DECLARE_GLOBAL_DATA_PTR; +static inline int gpt_has_clk_source_osc(void) +{ +#if defined(CONFIG_MX6) + if (((is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) && + (is_soc_rev(CHIP_REV_1_0) > 0)) || is_cpu_type(MXC_CPU_MX6DL) || + is_cpu_type(MXC_CPU_MX6SOLO) || is_cpu_type(MXC_CPU_MX6SX)) + return 1; + + return 0; +#else + return 0; +#endif +} + +static inline ulong gpt_get_clk(void) +{ +#ifdef CONFIG_MXC_GPT_HCLK + if (gpt_has_clk_source_osc()) + return MXC_HCLK >> 3; + else + return mxc_get_clock(MXC_IPG_PERCLK); +#else + return MXC_CLK32; +#endif +} static inline unsigned long long tick_to_time(unsigned long long tick) { + ulong gpt_clk = gpt_get_clk(); + tick *= CONFIG_SYS_HZ; - do_div(tick, MXC_CLK32); + do_div(tick, gpt_clk); return tick; } static inline unsigned long long us_to_tick(unsigned long long usec) { - usec = usec * MXC_CLK32 + 999999; + ulong gpt_clk = gpt_get_clk(); + + usec = usec * gpt_clk + 999999; do_div(usec, 1000000); return usec; @@ -59,11 +96,31 @@ int timer_init(void) for (i = 0; i < 100; i++) __raw_writel(0, &cur_gpt->control); - __raw_writel(0, &cur_gpt->prescaler); /* 32Khz */ - - /* Freerun Mode, PERCLK1 input */ i = __raw_readl(&cur_gpt->control); - __raw_writel(i | GPTCR_CLKSOURCE_32 | GPTCR_TEN, &cur_gpt->control); + i &= ~GPTCR_CLKSOURCE_MASK; + +#ifdef CONFIG_MXC_GPT_HCLK + if (gpt_has_clk_source_osc()) { + i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN; + + /* For DL/S, SX, set 24Mhz OSC Enable bit and prescaler */ + if (is_cpu_type(MXC_CPU_MX6DL) || + is_cpu_type(MXC_CPU_MX6SOLO) || + is_cpu_type(MXC_CPU_MX6SX)) { + i |= GPTCR_24MEN; + + /* Produce 3Mhz clock */ + __raw_writel((7 << GPTPR_PRESCALER24M_SHIFT), + &cur_gpt->prescaler); + } + } else { + i |= GPTCR_CLKSOURCE_PRE | GPTCR_TEN; + } +#else + __raw_writel(0, &cur_gpt->prescaler); /* 32Khz */ + i |= GPTCR_CLKSOURCE_32 | GPTCR_TEN; +#endif + __raw_writel(i, &cur_gpt->control); gd->arch.tbl = __raw_readl(&cur_gpt->counter); gd->arch.tbu = 0; @@ -86,7 +143,7 @@ ulong get_timer_masked(void) { /* * get_ticks() returns a long long (64 bit), it wraps in - * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~ + * 2^64 / GPT_CLK = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~ * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in * 5 * 10^6 days - long enough. */ @@ -117,5 +174,5 @@ void __udelay(unsigned long usec) */ ulong get_tbclk(void) { - return MXC_CLK32; + return gpt_get_clk(); } diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 33a82fca98..7eacf27a93 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -14,8 +14,6 @@ #include <asm/ti-common/sys_proto.h> #include <asm/arch/cpu.h> -#define BOARD_REV_ID 0x0 - u32 get_cpu_rev(void); u32 get_sysboot_value(void); diff --git a/arch/arm/include/asm/arch-at91/at91_shdwn.h b/arch/arm/include/asm/arch-at91/at91_shdwn.h deleted file mode 100644 index 18d9ea690e..0000000000 --- a/arch/arm/include/asm/arch-at91/at91_shdwn.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2010 - * Reinhard Meyer, reinhard.meyer@emk-elektronik.de - * - * Shutdown Controller - * Based on AT91SAM9XE datasheet - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef AT91_SHDWN_H -#define AT91_SHDWN_H - -#ifndef __ASSEMBLY__ - -struct at91_shdwn { - u32 cr; /* Control Rer. WO */ - u32 mr; /* Mode Register RW 0x00000003 */ - u32 sr; /* Status Register RO 0x00000000 */ -}; - -#endif /* __ASSEMBLY__ */ - -#define AT91_SHDW_CR_KEY 0xa5000000 -#define AT91_SHDW_CR_SHDW 0x00000001 - -#define AT91_SHDW_MR_RTTWKEN 0x00010000 -#define AT91_SHDW_MR_CPTWK0 0x000000f0 -#define AT91_SHDW_MR_WKMODE0H2L 0x00000002 -#define AT91_SHDW_MR_WKMODE0L2H 0x00000001 - -#define AT91_SHDW_SR_RTTWK 0x00010000 -#define AT91_SHDW_SR_WAKEUP0 0x00000001 - -#endif diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index ba717146f5..78aceef17b 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -29,6 +29,8 @@ #define EXYNOS4_MIU_BASE 0x10600000 #define EXYNOS4_ACE_SFR_BASE 0x10830000 #define EXYNOS4_GPIO_PART2_BASE 0x11000000 +#define EXYNOS4_GPIO_PART2_0 0x11000000 /* GPJ0 */ +#define EXYNOS4_GPIO_PART2_1 0x11000c00 /* GPX0 */ #define EXYNOS4_GPIO_PART1_BASE 0x11400000 #define EXYNOS4_FIMD_BASE 0x11C00000 #define EXYNOS4_MIPI_DSIM_BASE 0x11C80000 @@ -70,7 +72,14 @@ #define EXYNOS4X12_GPIO_PART4_BASE 0x106E0000 #define EXYNOS4X12_ACE_SFR_BASE 0x10830000 #define EXYNOS4X12_GPIO_PART2_BASE 0x11000000 +#define EXYNOS4X12_GPIO_PART2_0 0x11000000 +#define EXYNOS4X12_GPIO_PART2_1 0x11000040 /* GPK0 */ +#define EXYNOS4X12_GPIO_PART2_2 0x11000260 /* GPM0 */ +#define EXYNOS4X12_GPIO_PART2_3 0x11000c00 /* GPX0 */ #define EXYNOS4X12_GPIO_PART1_BASE 0x11400000 +#define EXYNOS4X12_GPIO_PART1_0 0x11400000 /* GPA0 */ +#define EXYNOS4X12_GPIO_PART1_1 0x11400180 /* GPF0 */ +#define EXYNOS4X12_GPIO_PART1_2 0x11400240 /* GPJ0 */ #define EXYNOS4X12_FIMD_BASE 0x11C00000 #define EXYNOS4X12_MIPI_DSIM_BASE 0x11C80000 #define EXYNOS4X12_USBOTG_BASE 0x12480000 diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index ad2ece64f4..02287decc2 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -284,7 +284,10 @@ enum exynos4_gpio_pin { EXYNOS4_GPIO_Y65, EXYNOS4_GPIO_Y66, EXYNOS4_GPIO_Y67, - EXYNOS4_GPIO_X00, /* 256 0x100 */ + + /* GPIO_PART2_1 STARTS */ + EXYNOS4_GPIO_MAX_PORT_PART_2_0, /* 256 0x100 */ + EXYNOS4_GPIO_X00 = EXYNOS4_GPIO_MAX_PORT_PART_2_0, EXYNOS4_GPIO_X01, EXYNOS4_GPIO_X02, EXYNOS4_GPIO_X03, @@ -318,8 +321,8 @@ enum exynos4_gpio_pin { EXYNOS4_GPIO_X37, /* GPIO_PART3_STARTS */ - EXYNOS4_GPIO_MAX_PORT_PART_2, /* 288 0x120 */ - EXYNOS4_GPIO_Z0 = EXYNOS4_GPIO_MAX_PORT_PART_2, + EXYNOS4_GPIO_MAX_PORT_PART_2_1, /* 288 0x120 */ + EXYNOS4_GPIO_Z0 = EXYNOS4_GPIO_MAX_PORT_PART_2_1, EXYNOS4_GPIO_Z1, EXYNOS4_GPIO_Z2, EXYNOS4_GPIO_Z3, @@ -332,7 +335,7 @@ enum exynos4_gpio_pin { }; enum exynos4X12_gpio_pin { - /* GPIO_PART1_STARTS */ + /* EXYNOS4X12_GPIO_PART1_0 starts here */ EXYNOS4X12_GPIO_A00, /* 0 */ EXYNOS4X12_GPIO_A01, EXYNOS4X12_GPIO_A02, @@ -389,7 +392,9 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_D15, EXYNOS4X12_GPIO_D16, EXYNOS4X12_GPIO_D17, - EXYNOS4X12_GPIO_F00, /* 56 0x38 */ + EXYNOS4X12_GPIO_MAX_PORT_PART_1_0, /* 56 0x38 */ + /* EXYNOS4X12_GPIO_PART1_1 starts here */ + EXYNOS4X12_GPIO_F00 = EXYNOS4X12_GPIO_MAX_PORT_PART_1_0, EXYNOS4X12_GPIO_F01, EXYNOS4X12_GPIO_F02, EXYNOS4X12_GPIO_F03, @@ -421,7 +426,9 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_F35, EXYNOS4X12_GPIO_F36, EXYNOS4X12_GPIO_F37, - EXYNOS4X12_GPIO_J00, /* 88 0x58 */ + EXYNOS4X12_GPIO_MAX_PORT_PART_1_1, /* 88 0x58 */ + /* EXYNOS4X12_GPIO_PART1_2 starts here */ + EXYNOS4X12_GPIO_J00 = EXYNOS4X12_GPIO_MAX_PORT_PART_1_1, EXYNOS4X12_GPIO_J01, EXYNOS4X12_GPIO_J02, EXYNOS4X12_GPIO_J03, @@ -438,9 +445,12 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_J16, EXYNOS4X12_GPIO_J17, - /* GPIO_PART2_STARTS */ - EXYNOS4X12_GPIO_MAX_PORT_PART_1,/* 104 0x66 */ - EXYNOS4X12_GPIO_K00 = EXYNOS4X12_GPIO_MAX_PORT_PART_1, + /** + * EXYNOS4X12_GPIO_PART2_0 is not used + * EXYNOS4X12_GPIO_PART2_1 starts here + */ + EXYNOS4X12_GPIO_MAX_PORT_PART_1_2, /* 104 0x66 */ + EXYNOS4X12_GPIO_K00 = EXYNOS4X12_GPIO_MAX_PORT_PART_1_2, EXYNOS4X12_GPIO_K01, EXYNOS4X12_GPIO_K02, EXYNOS4X12_GPIO_K03, @@ -552,7 +562,9 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_Y65, EXYNOS4X12_GPIO_Y66, EXYNOS4X12_GPIO_Y67, - EXYNOS4X12_GPIO_M00, /* 216 0xd8 */ + EXYNOS4X12_GPIO_MAX_PORT_PART_2_1, /* 216 0xd8 */ + /* EXYNOS4X12_GPIO_PART2_2 starts here */ + EXYNOS4X12_GPIO_M00 = EXYNOS4X12_GPIO_MAX_PORT_PART_2_1, EXYNOS4X12_GPIO_M01, EXYNOS4X12_GPIO_M02, EXYNOS4X12_GPIO_M03, @@ -592,7 +604,9 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_M45, EXYNOS4X12_GPIO_M46, EXYNOS4X12_GPIO_M47, - EXYNOS4X12_GPIO_X00, /* 256 0x100 */ + EXYNOS4X12_GPIO_MAX_PORT_PART_2_2, /* 256 0x100 */ + /* EXYNOS4X12_GPIO_PART2_3 starts here */ + EXYNOS4X12_GPIO_X00 = EXYNOS4X12_GPIO_MAX_PORT_PART_2_2, EXYNOS4X12_GPIO_X01, EXYNOS4X12_GPIO_X02, EXYNOS4X12_GPIO_X03, @@ -625,9 +639,9 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_X36, EXYNOS4X12_GPIO_X37, - /* GPIO_PART3_STARTS */ - EXYNOS4X12_GPIO_MAX_PORT_PART_2,/* 288 0x120 */ - EXYNOS4X12_GPIO_Z0 = EXYNOS4X12_GPIO_MAX_PORT_PART_2, + /* EXYNOS4X12_GPIO_PART3 starts here */ + EXYNOS4X12_GPIO_MAX_PORT_PART_2_3, /* 288 0x120 */ + EXYNOS4X12_GPIO_Z0 = EXYNOS4X12_GPIO_MAX_PORT_PART_2_3, EXYNOS4X12_GPIO_Z1, EXYNOS4X12_GPIO_Z2, EXYNOS4X12_GPIO_Z3, @@ -636,7 +650,7 @@ enum exynos4X12_gpio_pin { EXYNOS4X12_GPIO_Z6, EXYNOS4X12_GPIO_Z7, - /* GPIO_PART4_STARTS */ + /* EXYNOS4X12_GPIO_PART4 starts here */ EXYNOS4X12_GPIO_MAX_PORT_PART_3,/* 296 0x128 */ EXYNOS4X12_GPIO_V00 = EXYNOS4X12_GPIO_MAX_PORT_PART_3, EXYNOS4X12_GPIO_V01, @@ -1339,17 +1353,22 @@ struct gpio_info { unsigned int max_gpio; /* Maximum GPIO in this part */ }; -#define EXYNOS4_GPIO_NUM_PARTS 3 +#define EXYNOS4_GPIO_NUM_PARTS 4 static struct gpio_info exynos4_gpio_data[EXYNOS4_GPIO_NUM_PARTS] = { { EXYNOS4_GPIO_PART1_BASE, EXYNOS4_GPIO_MAX_PORT_PART_1 }, - { EXYNOS4_GPIO_PART2_BASE, EXYNOS4_GPIO_MAX_PORT_PART_2 }, + { EXYNOS4_GPIO_PART2_0, EXYNOS4_GPIO_MAX_PORT_PART_2_0 }, + { EXYNOS4_GPIO_PART2_1, EXYNOS4_GPIO_MAX_PORT_PART_2_1 }, { EXYNOS4_GPIO_PART3_BASE, EXYNOS4_GPIO_MAX_PORT }, }; -#define EXYNOS4X12_GPIO_NUM_PARTS 4 +#define EXYNOS4X12_GPIO_NUM_PARTS 8 static struct gpio_info exynos4x12_gpio_data[EXYNOS4X12_GPIO_NUM_PARTS] = { - { EXYNOS4X12_GPIO_PART1_BASE, EXYNOS4X12_GPIO_MAX_PORT_PART_1 }, - { EXYNOS4X12_GPIO_PART2_BASE, EXYNOS4X12_GPIO_MAX_PORT_PART_2 }, + { EXYNOS4X12_GPIO_PART1_0, EXYNOS4X12_GPIO_MAX_PORT_PART_1_0 }, + { EXYNOS4X12_GPIO_PART1_1, EXYNOS4X12_GPIO_MAX_PORT_PART_1_1 }, + { EXYNOS4X12_GPIO_PART1_2, EXYNOS4X12_GPIO_MAX_PORT_PART_1_2 }, + { EXYNOS4X12_GPIO_PART2_1, EXYNOS4X12_GPIO_MAX_PORT_PART_2_1 }, + { EXYNOS4X12_GPIO_PART2_2, EXYNOS4X12_GPIO_MAX_PORT_PART_2_2 }, + { EXYNOS4X12_GPIO_PART2_3, EXYNOS4X12_GPIO_MAX_PORT_PART_2_3 }, { EXYNOS4X12_GPIO_PART3_BASE, EXYNOS4X12_GPIO_MAX_PORT_PART_3 }, { EXYNOS4X12_GPIO_PART4_BASE, EXYNOS4X12_GPIO_MAX_PORT }, }; diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2e.h b/arch/arm/include/asm/arch-keystone/hardware-k2e.h index 9512756619..df499957e5 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2e.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2e.h @@ -57,8 +57,6 @@ #define KS2_NETCP_PDMA_SCHED_BASE 0x24186100 #define KS2_NETCP_PDMA_RX_FLOW_BASE 0x24189000 #define KS2_NETCP_PDMA_RX_FLOW_NUM 96 -#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001 -#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002 #define KS2_NETCP_PDMA_TX_SND_QUEUE 896 /* NETCP */ diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h index 5a9ea4fbca..195c0d3003 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2hk.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2hk.h @@ -98,8 +98,6 @@ #define KS2_NETCP_PDMA_SCHED_BASE 0x02004c00 #define KS2_NETCP_PDMA_RX_FLOW_BASE 0x02005000 #define KS2_NETCP_PDMA_RX_FLOW_NUM 32 -#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001 -#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002 #define KS2_NETCP_PDMA_TX_SND_QUEUE 648 /* NETCP */ diff --git a/arch/arm/include/asm/arch-keystone/hardware-k2l.h b/arch/arm/include/asm/arch-keystone/hardware-k2l.h index 05532ada70..4f1197ea92 100644 --- a/arch/arm/include/asm/arch-keystone/hardware-k2l.h +++ b/arch/arm/include/asm/arch-keystone/hardware-k2l.h @@ -84,6 +84,10 @@ /* OSR memory size */ #define KS2_OSR_SIZE 0x100000 +/* SGMII SerDes */ +#define KS2_SGMII_SERDES2_BASE 0x02320000 +#define KS2_LANES_PER_SGMII_SERDES 2 + /* Number of DSP cores */ #define KS2_NUM_DSPS 4 @@ -98,4 +102,7 @@ #define KS2_NETCP_PDMA_RX_FLOW_NUM 96 #define KS2_NETCP_PDMA_TX_SND_QUEUE 896 +/* NETCP */ +#define KS2_NETCP_BASE 0x26000000 + #endif /* __ASM_ARCH_HARDWARE_K2L_H */ diff --git a/arch/arm/include/asm/arch-keystone/hardware.h b/arch/arm/include/asm/arch-keystone/hardware.h index c6a54d8b91..be22bdb1ca 100644 --- a/arch/arm/include/asm/arch-keystone/hardware.h +++ b/arch/arm/include/asm/arch-keystone/hardware.h @@ -122,6 +122,10 @@ typedef volatile unsigned int *dv_reg_p; #define KS2_EDMA_QEESR 0x108c #define KS2_EDMA_PARAM_1(x) (0x4020 + (4 * x)) +/* NETCP pktdma */ +#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001 +#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002 + /* Chip Interrupt Controller */ #define KS2_CIC2_BASE 0x02608000 diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index e67b5b9e7d..39f3c0707b 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -89,7 +89,7 @@ struct mxc_ccm_reg { u32 analog_pll_video_tog; u32 analog_pll_video_num; /* 0x40b0 */ u32 analog_reserved6[3]; - u32 analog_pll_vedio_denon; /* 0x40c0 */ + u32 analog_pll_video_denom; /* 0x40c0 */ u32 analog_reserved7[7]; u32 analog_pll_enet; /* 0x40e0 */ u32 analog_pll_enet_set; @@ -228,6 +228,8 @@ struct mxc_ccm_reg { #ifdef CONFIG_MX6SX #define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_MASK (0x7 << 7) #define MXC_CCM_CSCMR1_QSPI1_CLK_SEL_OFFSET 7 +#endif +#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX)) #define MXC_CCM_CSCMR1_PER_CLK_SEL_MASK (1 << 6) #define MXC_CCM_CSCMR1_PER_CLK_SEL_OFFSET 6 #endif @@ -931,10 +933,10 @@ struct mxc_ccm_reg { #define BF_ANADIG_PLL_VIDEO_RSVD0(v) \ (((v) << 22) & BM_ANADIG_PLL_VIDEO_RSVD0) #define BM_ANADIG_PLL_VIDEO_SSC_EN 0x00200000 -#define BP_ANADIG_PLL_VIDEO_TEST_DIV_SELECT 19 -#define BM_ANADIG_PLL_VIDEO_TEST_DIV_SELECT 0x00180000 -#define BF_ANADIG_PLL_VIDEO_TEST_DIV_SELECT(v) \ - (((v) << 19) & BM_ANADIG_PLL_VIDEO_TEST_DIV_SELECT) +#define BP_ANADIG_PLL_VIDEO_POST_DIV_SELECT 19 +#define BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT 0x00180000 +#define BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(v) \ + (((v) << 19) & BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT) #define BM_ANADIG_PLL_VIDEO_PFD_OFFSET_EN 0x00040000 #define BM_ANADIG_PLL_VIDEO_DITHER_ENABLE 0x00020000 #define BM_ANADIG_PLL_VIDEO_BYPASS 0x00010000 diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h index 045ccc4512..d9db58c9a3 100644 --- a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h @@ -14,12 +14,31 @@ enum { MX6_PAD_ECSPI1_MOSI__ECSPI_MOSI = IOMUX_PAD(0x035C, 0x006C, 0, 0x0688, 0, 0), MX6_PAD_ECSPI1_SCLK__ECSPI_SCLK = IOMUX_PAD(0x0360, 0x0070, 0, 0x067C, 0, 0), MX6_PAD_ECSPI1_SS0__GPIO4_IO11 = IOMUX_PAD(0x0364, 0x0074, 5, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x0534, 0x022C, 0, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x0538, 0x0230, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__USDHC1_DAT0 = IOMUX_PAD(0x053C, 0x0234, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__USDHC1_DAT1 = IOMUX_PAD(0x0540, 0x0238, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__USDHC1_DAT2 = IOMUX_PAD(0x0544, 0x023C, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__USDHC1_DAT3 = IOMUX_PAD(0x0548, 0x0240, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT4__USDHC1_DAT4 = IOMUX_PAD(0x054C, 0x0244, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT5__USDHC1_DAT5 = IOMUX_PAD(0x0550, 0x0248, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT6__USDHC1_DAT6 = IOMUX_PAD(0x0554, 0x024C, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT7__USDHC1_DAT7 = IOMUX_PAD(0x0558, 0x0250, 0, 0x0000, 0, 0), + MX6_PAD_KEY_ROW7__GPIO_4_7 = IOMUX_PAD(0x04B0, 0x01A8, 5, 0x0000, 0, 0), MX6_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x055C, 0x0254, 0, 0x0000, 0, 0), MX6_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0560, 0x0258, 0, 0x0000, 0, 0), MX6_PAD_SD2_DAT0__USDHC2_DAT0 = IOMUX_PAD(0x0564, 0x025C, 0, 0x0000, 0, 0), MX6_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0568, 0x0260, 0, 0x0000, 0, 0), MX6_PAD_SD2_DAT2__USDHC2_DAT2 = IOMUX_PAD(0x056C, 0x0264, 0, 0x0000, 0, 0), MX6_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x0570, 0x0268, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT7__GPIO_5_0 = IOMUX_PAD(0x0580, 0x0278, 5, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x0588, 0x0280, 0, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x058C, 0x0284, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x0590, 0x0288, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x0594, 0x028C, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x0598, 0x0290, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x059C, 0x0294, 0, 0x0000, 0, 0), + MX6_PAD_REF_CLK_32K__GPIO_3_22 = IOMUX_PAD(0x0530, 0x0228, 5, 0x0000, 0, 0), MX6_PAD_UART1_RXD__UART1_RXD = IOMUX_PAD(0x05A0, 0x0298, 0, 0x07FC, 0, 0), MX6_PAD_UART1_TXD__UART1_TXD = IOMUX_PAD(0x05A4, 0x029C, 0, 0x0000, 0, 0), diff --git a/arch/arm/include/asm/arch-rmobile/rcar-base.h b/arch/arm/include/asm/arch-rmobile/rcar-base.h index 027e9b1b14..9c1439b764 100644 --- a/arch/arm/include/asm/arch-rmobile/rcar-base.h +++ b/arch/arm/include/asm/arch-rmobile/rcar-base.h @@ -385,6 +385,8 @@ #define PLL0CR 0xE61500D8 #define PLL0_STC_MASK 0x7F000000 #define PLL0_STC_BIT 24 +#define PLLECR 0xE61500D0 +#define PLL0ST 0x100 #ifndef __ASSEMBLY__ #include <asm/types.h> diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h index c562f621c2..42382a8ae2 100644 --- a/arch/arm/include/asm/arch-sunxi/clock.h +++ b/arch/arm/include/asm/arch-sunxi/clock.h @@ -15,7 +15,7 @@ #define CLK_GATE_CLOSE 0x0 /* clock control module regs definition */ -#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) +#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) #include <asm/arch/clock_sun6i.h> #else #include <asm/arch/clock_sun4i.h> diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 7bb649950a..437dd35b68 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -155,7 +155,7 @@ enum sunxi_gpio_number { #define SUNXI_GPF2_SDC0 2 -#ifdef CONFIG_SUN8I +#ifdef CONFIG_MACH_SUN8I #define SUNXI_GPF2_UART0_TX 3 #define SUNXI_GPF4_UART0_RX 3 #else @@ -180,7 +180,9 @@ enum sunxi_gpio_number { #define SUNXI_GPIO_PULL_UP 1 #define SUNXI_GPIO_PULL_DOWN 2 -int sunxi_gpio_set_cfgpin(u32 pin, u32 val); +void sunxi_gpio_set_cfgbank(struct sunxi_gpio *pio, int bank_offset, u32 val); +void sunxi_gpio_set_cfgpin(u32 pin, u32 val); +int sunxi_gpio_get_cfgbank(struct sunxi_gpio *pio, int bank_offset); int sunxi_gpio_get_cfgpin(u32 pin); int sunxi_gpio_set_drv(u32 pin, u32 val); int sunxi_gpio_set_pull(u32 pin, u32 val); diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h index 8a216740a7..537f145564 100644 --- a/arch/arm/include/asm/arch-sunxi/mmc.h +++ b/arch/arm/include/asm/arch-sunxi/mmc.h @@ -43,7 +43,7 @@ struct sunxi_mmc { u32 chda; /* 0x90 */ u32 cbda; /* 0x94 */ u32 res1[26]; -#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) +#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) u32 res2[64]; #endif u32 fifo; /* 0x100 (0x200 on sun6i) FIFO access address */ diff --git a/arch/arm/include/asm/arch-sunxi/timer.h b/arch/arm/include/asm/arch-sunxi/timer.h index 03a0684c79..9a5e488a38 100644 --- a/arch/arm/include/asm/arch-sunxi/timer.h +++ b/arch/arm/include/asm/arch-sunxi/timer.h @@ -67,7 +67,7 @@ struct sunxi_timer_reg { struct sunxi_timer timer[6]; /* We have 6 timers */ u8 res2[16]; struct sunxi_avs avs; -#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I) struct sunxi_wdog wdog; /* 0x90 */ /* XXX the following is not accurate for sun5i/sun7i */ struct sunxi_64cnt cnt64; /* 0xa0 */ @@ -77,7 +77,7 @@ struct sunxi_timer_reg { struct sunxi_tgp tgp[4]; u8 res5[8]; u32 cpu_cfg; -#else /* CONFIG_SUN6I || CONFIG_SUN8I || ... */ +#else /* CONFIG_MACH_SUN6I || CONFIG_MACH_SUN8I || ... */ u8 res3[16]; struct sunxi_wdog wdog[5]; /* We have 5 watchdogs */ #endif diff --git a/arch/arm/include/asm/arch-sunxi/watchdog.h b/arch/arm/include/asm/arch-sunxi/watchdog.h index ccc8fa32c4..8108be97ba 100644 --- a/arch/arm/include/asm/arch-sunxi/watchdog.h +++ b/arch/arm/include/asm/arch-sunxi/watchdog.h @@ -13,7 +13,7 @@ #define WDT_CTRL_RESTART (0x1 << 0) #define WDT_CTRL_KEY (0x0a57 << 1) -#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I) +#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I) #define WDT_MODE_EN (0x1 << 0) #define WDT_MODE_RESET_EN (0x1 << 1) diff --git a/arch/arm/include/asm/arch-uniphier/ehci-uniphier.h b/arch/arm/include/asm/arch-uniphier/ehci-uniphier.h new file mode 100644 index 0000000000..e9c5fb4af8 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/ehci-uniphier.h @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __PLAT_UNIPHIER_EHCI_H +#define __PLAT_UNIPHIER_EHCI_H + +#include <linux/types.h> +#include <asm/io.h> +#include "mio-regs.h" + +struct uniphier_ehci_platform_data { + unsigned long base; +}; + +extern struct uniphier_ehci_platform_data uniphier_ehci_platdata[]; + +static inline void uniphier_ehci_reset(int index, int on) +{ + u32 tmp; + + tmp = readl(MIO_USB_RSTCTRL(index)); + if (on) + tmp &= ~MIO_USB_RSTCTRL_XRST; + else + tmp |= MIO_USB_RSTCTRL_XRST; + writel(tmp, MIO_USB_RSTCTRL(index)); +} + +#endif /* __PLAT_UNIPHIER_EHCI_H */ diff --git a/arch/arm/include/asm/arch-uniphier/mio-regs.h b/arch/arm/include/asm/arch-uniphier/mio-regs.h new file mode 100644 index 0000000000..3306934ff7 --- /dev/null +++ b/arch/arm/include/asm/arch-uniphier/mio-regs.h @@ -0,0 +1,20 @@ +/* + * UniPhier MIO (Media I/O) registers + * + * Copyright (C) 2014 Panasonic Corporation + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef ARCH_MIO_REGS_H +#define ARCH_MIO_REGS_H + +#define MIO_BASE 0x59810000 + +#define MIO_CLKCTRL(i) (MIO_BASE + 0x200 * (i) + 0x0020) +#define MIO_RSTCTRL(i) (MIO_BASE + 0x200 * (i) + 0x0110) +#define MIO_USB_RSTCTRL(i) (MIO_BASE + 0x200 * (i) + 0x0114) + +#define MIO_USB_RSTCTRL_XRST (0x1 << 0) + +#endif /* ARCH_MIO_REGS_H */ diff --git a/arch/arm/include/asm/arch-uniphier/platdevice.h b/arch/arm/include/asm/arch-uniphier/platdevice.h index cdf7d132d4..62a512659c 100644 --- a/arch/arm/include/asm/arch-uniphier/platdevice.h +++ b/arch/arm/include/asm/arch-uniphier/platdevice.h @@ -21,4 +21,6 @@ U_BOOT_DEVICE(serial##n) = { \ .platdata = &serial_device##n \ }; +#include <asm/arch/ehci-uniphier.h> + #endif /* ARCH_PLATDEVICE_H */ diff --git a/arch/arm/include/asm/arch-uniphier/sg-regs.h b/arch/arm/include/asm/arch-uniphier/sg-regs.h index 79d7ec7148..fa5e6ae0f2 100644 --- a/arch/arm/include/asm/arch-uniphier/sg-regs.h +++ b/arch/arm/include/asm/arch-uniphier/sg-regs.h @@ -88,7 +88,18 @@ #define SG_PINMON0_CLK_MODE_AXOSEL_20480KHZ (0x2 << 16) #define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A (0x3 << 16) -#ifndef __ASSEMBLY__ +#ifdef __ASSEMBLY__ + + .macro set_pinsel, n, value, ra, rd + ldr \ra, =SG_PINSEL_ADDR(\n) + ldr \rd, [\ra] + and \rd, \rd, #SG_PINSEL_MASK(\n) + orr \rd, \rd, #SG_PINSEL_MODE(\n, \value) + str \rd, [\ra] + .endm + +#else + #include <linux/types.h> #include <asm/io.h> diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h index a8ca49c343..e0a49be4ff 100644 --- a/arch/arm/include/asm/imx-common/iomux-v3.h +++ b/arch/arm/include/asm/imx-common/iomux-v3.h @@ -182,6 +182,11 @@ typedef u64 iomux_v3_cfg_t; void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad); void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, unsigned count); +/* +* Set bits for general purpose registers +*/ +void imx_iomux_set_gpr_register(int group, int start_bit, + int num_bits, int value); /* macros for declaring and using pinmux array */ #if defined(CONFIG_MX6QDL) diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h index 541b443254..1c8c4251ee 100644 --- a/arch/arm/include/asm/macro.h +++ b/arch/arm/include/asm/macro.h @@ -193,7 +193,7 @@ lr .req x30 0 : wfi ldr \wreg2, [\xreg1, GICC_AIAR] str \wreg2, [\xreg1, GICC_AEOIR] - and \wreg2, \wreg2, #3ff + and \wreg2, \wreg2, #0x3ff cbnz \wreg2, 0b .endm #endif diff --git a/arch/arm/include/debug/8250.S b/arch/arm/include/debug/8250.S new file mode 100644 index 0000000000..d47a892652 --- /dev/null +++ b/arch/arm/include/debug/8250.S @@ -0,0 +1,52 @@ +/* + * arch/arm/include/debug/8250.S + * + * Copyright (C) 1994-2013 Russell King + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <linux/serial_reg.h> + + .macro addruart, rp, rv, tmp + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT + .endm + +#ifdef CONFIG_DEBUG_UART_8250_WORD + .macro store, rd, rx:vararg + str \rd, \rx + .endm + + .macro load, rd, rx:vararg + ldr \rd, \rx + .endm +#else + .macro store, rd, rx:vararg + strb \rd, \rx + .endm + + .macro load, rd, rx:vararg + ldrb \rd, \rx + .endm +#endif + +#define UART_SHIFT CONFIG_DEBUG_UART_8250_SHIFT + + .macro senduart,rd,rx + store \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: load \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + .macro waituart,rd,rx +#ifdef CONFIG_DEBUG_UART_8250_FLOW_CONTROL +1001: load \rd, [\rx, #UART_MSR << UART_SHIFT] + tst \rd, #UART_MSR_CTS + beq 1001b +#endif + .endm diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 1ef240047f..d74e4b8415 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -48,6 +48,8 @@ ifndef CONFIG_ARM64 obj-y += cache-cp15.o endif +obj-$(CONFIG_DEBUG_LL) += debug.o + # For EABI conformant tool chains, provide eabi_compat() ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS))) extra-y += eabi_compat.o diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index cdb1975105..4949d573af 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -15,7 +15,6 @@ #include <common.h> #include <command.h> #include <image.h> -#include <vxworks.h> #include <u-boot/zlib.h> #include <asm/byteorder.h> #include <libfdt.h> diff --git a/arch/arm/lib/debug.S b/arch/arm/lib/debug.S new file mode 100644 index 0000000000..760ba74a3c --- /dev/null +++ b/arch/arm/lib/debug.S @@ -0,0 +1,136 @@ +/* + * linux/arch/arm/kernel/debug.S + * + * Copyright (C) 1994-1999 Russell King + * + * SPDX-License-Identifier: GPL-2.0+ + * + * 32-bit debugging code + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + + .text + +/* + * Some debugging routines (useful if you've got MM problems and + * printk isn't working). For DEBUGGING ONLY!!! Do not leave + * references to these in a production kernel! + */ + +#if !defined(CONFIG_DEBUG_SEMIHOSTING) +#include CONFIG_DEBUG_LL_INCLUDE +#endif + +#ifdef CONFIG_MMU + .macro addruart_current, rx, tmp1, tmp2 + addruart \tmp1, \tmp2, \rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + moveq \rx, \tmp1 + movne \rx, \tmp2 + .endm + +#else /* !CONFIG_MMU */ + .macro addruart_current, rx, tmp1, tmp2 + addruart \rx, \tmp1, \tmp2 + .endm + +#endif /* CONFIG_MMU */ + +/* + * Useful debugging routines + */ +ENTRY(printhex8) + mov r1, #8 + b printhex +ENDPROC(printhex8) + +ENTRY(printhex4) + mov r1, #4 + b printhex +ENDPROC(printhex4) + +ENTRY(printhex2) + mov r1, #2 +printhex: adr r2, hexbuf + add r3, r2, r1 + mov r1, #0 + strb r1, [r3] +1: and r1, r0, #15 + mov r0, r0, lsr #4 + cmp r1, #10 + addlt r1, r1, #'0' + addge r1, r1, #'a' - 10 + strb r1, [r3, #-1]! + teq r3, r2 + bne 1b + mov r0, r2 + b printascii +ENDPROC(printhex2) + +hexbuf: .space 16 + + .ltorg + +#ifndef CONFIG_DEBUG_SEMIHOSTING + +ENTRY(printascii) + addruart_current r3, r1, r2 + b 2f +1: waituart r2, r3 + senduart r1, r3 + busyuart r2, r3 + teq r1, #'\n' + moveq r1, #'\r' + beq 1b +2: teq r0, #0 + ldrneb r1, [r0], #1 + teqne r1, #0 + bne 1b + mov pc, lr +ENDPROC(printascii) + +ENTRY(printch) + addruart_current r3, r1, r2 + mov r1, r0 + mov r0, #0 + b 1b +ENDPROC(printch) + +#ifdef CONFIG_MMU +ENTRY(debug_ll_addr) + addruart r2, r3, ip + str r2, [r0] + str r3, [r1] + mov pc, lr +ENDPROC(debug_ll_addr) +#endif + +#else + +ENTRY(printascii) + mov r1, r0 + mov r0, #0x04 @ SYS_WRITE0 + ARM( svc #0x123456 ) + THUMB( svc #0xab ) + mov pc, lr +ENDPROC(printascii) + +ENTRY(printch) + adr r1, hexbuf + strb r0, [r1] + mov r0, #0x03 @ SYS_WRITEC + ARM( svc #0x123456 ) + THUMB( svc #0xab ) + mov pc, lr +ENDPROC(printch) + +ENTRY(debug_ll_addr) + mov r2, #0 + str r2, [r0] + str r2, [r1] + mov pc, lr +ENDPROC(debug_ll_addr) + +#endif diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c index 2e640afc45..fde54eaa3e 100644 --- a/arch/blackfin/cpu/initcode.c +++ b/arch/blackfin/cpu/initcode.c @@ -955,6 +955,7 @@ check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs) uint32_t *hibernate_magic = 0; SSYNC(); + /* cppcheck-suppress nullPointer */ if (hibernate_magic[0] == 0xDEADBEEF) { serial_putc('c'); bfin_write_EVT15(hibernate_magic[1]); diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h index 836658a1c4..73cbfa2cc8 100644 --- a/arch/blackfin/include/asm/config.h +++ b/arch/blackfin/include/asm/config.h @@ -178,4 +178,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_ARCH_MISC_INIT +#define CONFIG_CPU CONFIG_BFIN_CPU + #endif diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 9b72bab56b..4991da2226 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -4,6 +4,10 @@ menu "MIPS architecture" config SYS_ARCH default "mips" +config SYS_CPU + default "mips32" if CPU_MIPS32_R1 || CPU_MIPS32_R2 + default "mips64" if CPU_MIPS64_R1 || CPU_MIPS64_R2 + config USE_PRIVATE_LIBGCC default y @@ -12,21 +16,39 @@ choice config TARGET_QEMU_MIPS bool "Support qemu-mips" + select SUPPORTS_BIG_ENDIAN + select SUPPORTS_LITTLE_ENDIAN + select SUPPORTS_CPU_MIPS32_R1 + select SUPPORTS_CPU_MIPS32_R2 + select SUPPORTS_CPU_MIPS64_R1 + select SUPPORTS_CPU_MIPS64_R2 config TARGET_MALTA bool "Support malta" + select SUPPORTS_BIG_ENDIAN + select SUPPORTS_LITTLE_ENDIAN + select SUPPORTS_CPU_MIPS32_R1 + select SUPPORTS_CPU_MIPS32_R2 config TARGET_VCT bool "Support vct" + select SUPPORTS_BIG_ENDIAN + select SUPPORTS_CPU_MIPS32_R1 + select SUPPORTS_CPU_MIPS32_R2 config TARGET_DBAU1X00 bool "Support dbau1x00" + select SUPPORTS_BIG_ENDIAN + select SUPPORTS_LITTLE_ENDIAN + select SUPPORTS_CPU_MIPS32_R1 + select SUPPORTS_CPU_MIPS32_R2 config TARGET_PB1X00 bool "Support pb1x00" + select SUPPORTS_LITTLE_ENDIAN + select SUPPORTS_CPU_MIPS32_R1 + select SUPPORTS_CPU_MIPS32_R2 -config TARGET_QEMU_MIPS64 - bool "Support qemu-mips64" endchoice @@ -36,4 +58,88 @@ source "board/micronas/vct/Kconfig" source "board/pb1x00/Kconfig" source "board/qemu-mips/Kconfig" +if MIPS + +choice + prompt "Endianness selection" + help + Some MIPS boards can be configured for either little or big endian + byte order. These modes require different U-Boot images. In general there + is one preferred byteorder for a particular system but some systems are + just as commonly used in the one or the other endianness. + +config SYS_BIG_ENDIAN + bool "Big endian" + depends on SUPPORTS_BIG_ENDIAN + +config SYS_LITTLE_ENDIAN + bool "Little endian" + depends on SUPPORTS_LITTLE_ENDIAN + +endchoice + +choice + prompt "CPU selection" + default CPU_MIPS32_R2 + +config CPU_MIPS32_R1 + bool "MIPS32 Release 1" + depends on SUPPORTS_CPU_MIPS32_R1 + select 32BIT + help + Choose this option to build an U-Boot for release 1 or later of the + MIPS32 architecture. + +config CPU_MIPS32_R2 + bool "MIPS32 Release 2" + depends on SUPPORTS_CPU_MIPS32_R2 + select 32BIT + help + Choose this option to build an U-Boot for release 2 or later of the + MIPS32 architecture. + +config CPU_MIPS64_R1 + bool "MIPS64 Release 1" + depends on SUPPORTS_CPU_MIPS64_R1 + select 64BIT + help + Choose this option to build a kernel for release 1 or later of the + MIPS64 architecture. + +config CPU_MIPS64_R2 + bool "MIPS64 Release 2" + depends on SUPPORTS_CPU_MIPS64_R2 + select 64BIT + help + Choose this option to build a kernel for release 2 or later of the + MIPS64 architecture. + +endchoice + +config SUPPORTS_BIG_ENDIAN + bool + +config SUPPORTS_LITTLE_ENDIAN + bool + +config SUPPORTS_CPU_MIPS32_R1 + bool + +config SUPPORTS_CPU_MIPS32_R2 + bool + +config SUPPORTS_CPU_MIPS64_R1 + bool + +config SUPPORTS_CPU_MIPS64_R2 + bool + +config 32BIT + bool + +config 64BIT + bool + +endif + endmenu diff --git a/arch/mips/config.mk b/arch/mips/config.mk index a2d07aff1b..4dc88f4d51 100644 --- a/arch/mips/config.mk +++ b/arch/mips/config.mk @@ -5,25 +5,41 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifeq ($(CROSS_COMPILE),) -CROSS_COMPILE := mips_4KC- +ifdef CONFIG_SYS_BIG_ENDIAN +32bit-emul := elf32btsmip +64bit-emul := elf64btsmip +32bit-bfd := elf32-tradbigmips +64bit-bfd := elf64-tradbigmips +PLATFORM_CPPFLAGS += -EB +PLATFORM_LDFLAGS += -EB endif -# Handle special prefix in ELDK 4.0 toolchain -ifneq (,$(findstring 4KCle,$(CROSS_COMPILE))) -ENDIANNESS := -EL +ifdef CONFIG_SYS_LITTLE_ENDIAN +32bit-emul := elf32ltsmip +64bit-emul := elf64ltsmip +32bit-bfd := elf32-tradlittlemips +64bit-bfd := elf64-tradlittlemips +PLATFORM_CPPFLAGS += -EL +PLATFORM_LDFLAGS += -EL endif -ifdef CONFIG_SYS_LITTLE_ENDIAN -ENDIANNESS := -EL +ifdef CONFIG_32BIT +PLATFORM_CPPFLAGS += -mabi=32 +PLATFORM_LDFLAGS += -m $(32bit-emul) +OBJCOPYFLAGS += -O $(32bit-bfd) endif -ifdef CONFIG_SYS_BIG_ENDIAN -ENDIANNESS := -EB +ifdef CONFIG_64BIT +PLATFORM_CPPFLAGS += -mabi=64 +PLATFORM_LDFLAGS += -m$(64bit-emul) +OBJCOPYFLAGS += -O $(64bit-bfd) endif -# Default to EB if no endianess is configured -ENDIANNESS ?= -EB +cpuflags-$(CONFIG_CPU_MIPS32_R1) += -march=mips32 -Wa,-mips32 +cpuflags-$(CONFIG_CPU_MIPS32_R2) += -march=mips32r2 -Wa,-mips32r2 +cpuflags-$(CONFIG_CPU_MIPS64_R1) += -march=mips64 -Wa,-mips64 +cpuflags-$(CONFIG_CPU_MIPS64_R2) += -march=mips64r2 -Wa,-mips64r2 +PLATFORM_CPPFLAGS += $(cpuflags-y) PLATFORM_CPPFLAGS += -D__MIPS__ @@ -49,10 +65,10 @@ __HAVE_ARCH_GENERIC_BOARD := y # On the other hand, we want PIC in the U-Boot code to relocate it from ROM # to RAM. $28 is always used as gp. # -PLATFORM_CPPFLAGS += -G 0 -mabicalls -fpic $(ENDIANNESS) +PLATFORM_CPPFLAGS += -G 0 -mabicalls -fpic PLATFORM_CPPFLAGS += -msoft-float -PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib $(ENDIANNESS) +PLATFORM_LDFLAGS += -G 0 -static -n -nostdlib PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections LDFLAGS_FINAL += --gc-sections -pie OBJCOPYFLAGS += -j .text -j .rodata -j .data -j .got -OBJCOPYFLAGS += -j .u_boot_list -j .rel.dyn +OBJCOPYFLAGS += -j .u_boot_list -j .rel.dyn -j .padding diff --git a/arch/mips/cpu/mips32/config.mk b/arch/mips/cpu/mips32/config.mk index 332cd62c74..4257c56d59 100644 --- a/arch/mips/cpu/mips32/config.mk +++ b/arch/mips/cpu/mips32/config.mk @@ -5,19 +5,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -# -# Default optimization level for MIPS32 -# -# Note: Toolchains with binutils prior to v2.16 -# are no longer supported by U-Boot MIPS tree! -# -PLATFORM_CPPFLAGS += -DCONFIG_MIPS32 -march=mips32r2 -PLATFORM_CPPFLAGS += -mabi=32 -DCONFIG_32BIT -ifdef CONFIG_SYS_BIG_ENDIAN -PLATFORM_LDFLAGS += -m elf32btsmip -else -PLATFORM_LDFLAGS += -m elf32ltsmip -endif - CONFIG_STANDALONE_LOAD_ADDR ?= 0x80200000 \ -T $(srctree)/examples/standalone/mips.lds diff --git a/arch/mips/cpu/mips64/config.mk b/arch/mips/cpu/mips64/config.mk index c55eb7f2ee..96eb82948d 100644 --- a/arch/mips/cpu/mips64/config.mk +++ b/arch/mips/cpu/mips64/config.mk @@ -5,19 +5,5 @@ # SPDX-License-Identifier: GPL-2.0+ # -# -# Default optimization level for MIPS64 -# -# Note: Toolchains with binutils prior to v2.16 -# are no longer supported by U-Boot MIPS tree! -# -PLATFORM_CPPFLAGS += -DCONFIG_MIPS64 -march=mips64 -PLATFORM_CPPFLAGS += -mabi=64 -DCONFIG_64BIT -ifdef CONFIG_SYS_BIG_ENDIAN -PLATFORM_LDFLAGS += -m elf64btsmip -else -PLATFORM_LDFLAGS += -m elf64ltsmip -endif - CONFIG_STANDALONE_LOAD_ADDR ?= 0xffffffff80200000 \ -T $(srctree)/examples/standalone/mips64.lds diff --git a/arch/mips/cpu/u-boot.lds b/arch/mips/cpu/u-boot.lds index e504ea7544..7d71c11ae4 100644 --- a/arch/mips/cpu/u-boot.lds +++ b/arch/mips/cpu/u-boot.lds @@ -61,6 +61,24 @@ SECTIONS __rel_dyn_end = .; } + .padding : { + /* + * Workaround for a binutils feature (or bug?). + * + * The GNU ld from binutils puts the dynamic relocation + * entries into the .rel.dyn section. Sometimes it + * allocates more dynamic relocation entries than it needs + * and the unused slots are set to R_MIPS_NONE entries. + * + * However the size of the .rel.dyn section in the ELF + * section header does not cover the unused entries, so + * objcopy removes those during stripping. + * + * Create a small section here to avoid that. + */ + LONG(0xFFFFFFFF) + } + _end = .; .bss __rel_dyn_start (OVERLAY) : { diff --git a/arch/powerpc/cpu/mpc5xxx/Kconfig b/arch/powerpc/cpu/mpc5xxx/Kconfig index a1305bc280..c1fb92af4b 100644 --- a/arch/powerpc/cpu/mpc5xxx/Kconfig +++ b/arch/powerpc/cpu/mpc5xxx/Kconfig @@ -56,9 +56,6 @@ config TARGET_TOTAL5200 config TARGET_V38B bool "Support v38b" -config TARGET_TOP5200 - bool "Support TOP5200" - config TARGET_CPCI5200 bool "Support cpci5200" diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c index 47b712d56b..072387a87e 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c @@ -161,9 +161,12 @@ void cpu_init_early_f(void *fdt) setup_ifc_sram = (void *)SRAM_BASE_ADDR; dst = (u32 *) SRAM_BASE_ADDR; src = (u32 *) setup_ifc; - for (i = 0; i < 1024; i++) + for (i = 0; i < 1024; i++) { + /* cppcheck-suppress nullPointer */ *dst++ = *src++; + } + /* cppcheck-suppress nullPointer */ setup_ifc_sram(); /* CLEANUP */ diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig index 011f4b41a7..e447748e12 100644 --- a/arch/powerpc/cpu/mpc8xx/Kconfig +++ b/arch/powerpc/cpu/mpc8xx/Kconfig @@ -40,9 +40,6 @@ config TARGET_RRVISION config TARGET_SPD823TS bool "Support SPD823TS" -config TARGET_TOP860 - bool "Support TOP860" - config TARGET_KUP4K bool "Support KUP4K" diff --git a/arch/powerpc/cpu/ppc4xx/cpu_init.c b/arch/powerpc/cpu/ppc4xx/cpu_init.c index 22561231cb..e5a0e21e36 100644 --- a/arch/powerpc/cpu/ppc4xx/cpu_init.c +++ b/arch/powerpc/cpu/ppc4xx/cpu_init.c @@ -451,6 +451,9 @@ cpu_init_f (void) #endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */ gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + + /* Clear initial global data */ + memset((void *)gd, 0, sizeof(gd_t)); } /* diff --git a/arch/powerpc/include/asm/ppc4xx-i2c.h b/arch/powerpc/include/asm/ppc4xx-i2c.h index 09189cf19b..df97f175b3 100644 --- a/arch/powerpc/include/asm/ppc4xx-i2c.h +++ b/arch/powerpc/include/asm/ppc4xx-i2c.h @@ -72,6 +72,8 @@ struct ppc4xx_i2c { #define IIC_EXTSTS_XFRA 0x01 #define IIC_EXTSTS_ICT 0x02 #define IIC_EXTSTS_LA 0x04 +#define IIC_EXTSTS_BCS_MASK 0x70 +#define IIC_EXTSTS_BCS_FREE 0x40 /* XTCNTLSS Register Bit definition */ #define IIC_XTCNTLSS_SRST 0x01 diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c index b3d70515dc..53a99ae71b 100644 --- a/arch/sandbox/cpu/start.c +++ b/arch/sandbox/cpu/start.c @@ -5,6 +5,7 @@ #include <common.h> #include <os.h> +#include <cli.h> #include <asm/getopt.h> #include <asm/io.h> #include <asm/sections.h> @@ -76,6 +77,8 @@ int sandbox_main_loop_init(void) /* Execute command if required */ if (state->cmd) { + cli_init(); + run_command_list(state->cmd, -1, 0); if (!state->interactive) os_exit(state->exit_type); diff --git a/arch/sh/lib/zimageboot.c b/arch/sh/lib/zimageboot.c index 86d39983c8..3fea5f5b53 100644 --- a/arch/sh/lib/zimageboot.c +++ b/arch/sh/lib/zimageboot.c @@ -45,6 +45,7 @@ int do_sh_zimageboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) bootargs = getenv("bootargs"); /* Clear zero page */ + /* cppcheck-suppress nullPointer */ memset(param, 0, 0x1000); /* Set commandline */ diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 733334f931..2df09b2e50 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -1,29 +1,56 @@ menu "SPARC architecture" depends on SPARC -config SYS_ARCH - default "sparc" +config LEON + bool + +config LEON2 + bool + select LEON + +config LEON3 + bool + select LEON choice - prompt "Target select" + prompt "Board select" config TARGET_GRSIM_LEON2 - bool "Support grsim_leon2" + bool "GRSIM simulating a LEON2 board" + select LEON2 config TARGET_GR_CPCI_AX2000 - bool "Support gr_cpci_ax2000" + bool "Gaisler GR-CPCI-AX2000 board" + select LEON3 config TARGET_GR_EP2S60 - bool "Support gr_ep2s60" + bool "Gaisler Template design for Altera NIOS board with Stratix EP2S60" + select LEON3 + help + Gaisler Research AB's Template design (GPL Open Source SPARC/LEON3 + 96MHz) for Altera NIOS Development board Stratix II edition, + with the FPGA device EP2S60. config TARGET_GR_XC3S_1500 - bool "Support gr_xc3s_1500" + bool "Gaisler GR-XC3S-1500 spartan board" + select LEON3 config TARGET_GRSIM - bool "Support grsim" + bool "GRSIM simulating a LEON3 GR-XC3S-1500 board" + select LEON3 endchoice +config SYS_ARCH + default "sparc" + +config SYS_CPU + default "leon2" if LEON2 + default "leon3" if LEON3 + +config SYS_VENDOR + default "gaisler" + source "board/gaisler/gr_cpci_ax2000/Kconfig" source "board/gaisler/gr_ep2s60/Kconfig" source "board/gaisler/gr_xc3s_1500/Kconfig" diff --git a/arch/sparc/config.mk b/arch/sparc/config.mk index 196d28af84..d615f294fe 100644 --- a/arch/sparc/config.mk +++ b/arch/sparc/config.mk @@ -15,3 +15,5 @@ CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 -L $(gcclibdir) \ -T $(srctree)/examples/standalone/sparc.lds PLATFORM_CPPFLAGS += -D__sparc__ + +PLATFORM_RELFLAGS += -fPIC diff --git a/arch/sparc/cpu/leon2/config.mk b/arch/sparc/cpu/leon2/config.mk deleted file mode 100644 index c44b0930ec..0000000000 --- a/arch/sparc/cpu/leon2/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_RELFLAGS += -fPIC - -PLATFORM_CPPFLAGS += -DCONFIG_LEON -DCONFIG_LEON2 diff --git a/arch/sparc/cpu/leon3/config.mk b/arch/sparc/cpu/leon3/config.mk deleted file mode 100644 index ca6c9b13ec..0000000000 --- a/arch/sparc/cpu/leon3/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_RELFLAGS += -fPIC - -PLATFORM_CPPFLAGS += -DCONFIG_LEON -DCONFIG_LEON3 diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile index e7bb3e33d5..9d38ef73a7 100644 --- a/arch/x86/cpu/Makefile +++ b/arch/x86/cpu/Makefile @@ -10,4 +10,4 @@ extra-y = start.o obj-$(CONFIG_X86_RESET_VECTOR) += resetvec.o start16.o -obj-y += interrupts.o cpu.o +obj-y += interrupts.o cpu.o call64.o diff --git a/arch/x86/cpu/call64.S b/arch/x86/cpu/call64.S new file mode 100644 index 0000000000..74dd5a89dc --- /dev/null +++ b/arch/x86/cpu/call64.S @@ -0,0 +1,93 @@ +/* + * (C) Copyright 2014 Google, Inc + * Copyright (C) 1991, 1992, 1993 Linus Torvalds + * + * Parts of this copied from Linux arch/x86/boot/compressed/head_64.S + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/global_data.h> +#include <asm/msr-index.h> +#include <asm/processor-flags.h> + +.code32 +.globl cpu_call64 +cpu_call64: + /* + * cpu_call64(ulong pgtable, ulong setup_base, ulong target) + * + * eax - pgtable + * edx - setup_base + * ecx - target + */ + cli + push %ecx /* arg2 = target */ + push %edx /* arg1 = setup_base */ + mov %eax, %ebx + + /* Load new GDT with the 64bit segments using 32bit descriptor */ + leal gdt, %eax + movl %eax, gdt+2 + lgdt gdt + + /* Enable PAE mode */ + movl $(X86_CR4_PAE), %eax + movl %eax, %cr4 + + /* Enable the boot page tables */ + leal (%ebx), %eax + movl %eax, %cr3 + + /* Enable Long mode in EFER (Extended Feature Enable Register) */ + movl $MSR_EFER, %ecx + rdmsr + btsl $_EFER_LME, %eax + wrmsr + + /* After gdt is loaded */ + xorl %eax, %eax + lldt %ax + movl $0x20, %eax + ltr %ax + + /* + * Setup for the jump to 64bit mode + * + * When the jump is performed we will be in long mode but + * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1 + * (and in turn EFER.LMA = 1). To jump into 64bit mode we use + * the new gdt/idt that has __KERNEL_CS with CS.L = 1. + * We place all of the values on our mini stack so lret can + * used to perform that far jump. See the gdt below. + */ + pop %esi /* setup_base */ + + pushl $0x10 + leal lret_target, %eax + pushl %eax + + /* Enter paged protected Mode, activating Long Mode */ + movl $(X86_CR0_PG | X86_CR0_PE), %eax + movl %eax, %cr0 + + /* Jump from 32bit compatibility mode into 64bit mode. */ + lret + +code64: +lret_target: + pop %eax /* target */ + mov %eax, %eax /* Clear bits 63:32 */ + jmp *%eax /* Jump to the 64-bit target */ + + .data +gdt: + .word gdt_end - gdt + .long gdt + .word 0 + .quad 0x0000000000000000 /* NULL descriptor */ + .quad 0x00af9a000000ffff /* __KERNEL_CS */ + .quad 0x00cf92000000ffff /* __KERNEL_DS */ + .quad 0x0080890000000000 /* TS descriptor */ + .quad 0x0000000000000000 /* TS continued */ +gdt_end: diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index 623e3af61f..2e252532d6 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -18,7 +18,10 @@ #include <common.h> #include <command.h> +#include <errno.h> +#include <malloc.h> #include <asm/control_regs.h> +#include <asm/cpu.h> #include <asm/processor.h> #include <asm/processor-flags.h> #include <asm/interrupt.h> @@ -240,3 +243,144 @@ int icache_status(void) { return 1; } + +void cpu_enable_paging_pae(ulong cr3) +{ + __asm__ __volatile__( + /* Load the page table address */ + "movl %0, %%cr3\n" + /* Enable pae */ + "movl %%cr4, %%eax\n" + "orl $0x00000020, %%eax\n" + "movl %%eax, %%cr4\n" + /* Enable paging */ + "movl %%cr0, %%eax\n" + "orl $0x80000000, %%eax\n" + "movl %%eax, %%cr0\n" + : + : "r" (cr3) + : "eax"); +} + +void cpu_disable_paging_pae(void) +{ + /* Turn off paging */ + __asm__ __volatile__ ( + /* Disable paging */ + "movl %%cr0, %%eax\n" + "andl $0x7fffffff, %%eax\n" + "movl %%eax, %%cr0\n" + /* Disable pae */ + "movl %%cr4, %%eax\n" + "andl $0xffffffdf, %%eax\n" + "movl %%eax, %%cr4\n" + : + : + : "eax"); +} + +static bool has_cpuid(void) +{ + unsigned long flag; + + asm volatile("pushf\n" \ + "pop %%eax\n" + "mov %%eax, %%ecx\n" /* ecx = flags */ + "xor %1, %%eax\n" + "push %%eax\n" + "popf\n" /* flags ^= $2 */ + "pushf\n" + "pop %%eax\n" /* eax = flags */ + "push %%ecx\n" + "popf\n" /* flags = ecx */ + "xor %%ecx, %%eax\n" + "mov %%eax, %0" + : "=r" (flag) + : "i" (1 << 21) + : "eax", "ecx", "memory"); + + return flag != 0; +} + +static bool can_detect_long_mode(void) +{ + unsigned long flag; + + asm volatile("mov $0x80000000, %%eax\n" + "cpuid\n" + "mov %%eax, %0" + : "=r" (flag) + : + : "eax", "ebx", "ecx", "edx", "memory"); + + return flag > 0x80000000UL; +} + +static bool has_long_mode(void) +{ + unsigned long flag; + + asm volatile("mov $0x80000001, %%eax\n" + "cpuid\n" + "mov %%edx, %0" + : "=r" (flag) + : + : "eax", "ebx", "ecx", "edx", "memory"); + + return flag & (1 << 29) ? true : false; +} + +int cpu_has_64bit(void) +{ + return has_cpuid() && can_detect_long_mode() && + has_long_mode(); +} + +int print_cpuinfo(void) +{ + printf("CPU: %s\n", cpu_has_64bit() ? "x86_64" : "x86"); + + return 0; +} + +#define PAGETABLE_SIZE (6 * 4096) + +/** + * build_pagetable() - build a flat 4GiB page table structure for 64-bti mode + * + * @pgtable: Pointer to a 24iKB block of memory + */ +static void build_pagetable(uint32_t *pgtable) +{ + uint i; + + memset(pgtable, '\0', PAGETABLE_SIZE); + + /* Level 4 needs a single entry */ + pgtable[0] = (uint32_t)&pgtable[1024] + 7; + + /* Level 3 has one 64-bit entry for each GiB of memory */ + for (i = 0; i < 4; i++) { + pgtable[1024 + i * 2] = (uint32_t)&pgtable[2048] + + 0x1000 * i + 7; + } + + /* Level 2 has 2048 64-bit entries, each repesenting 2MiB */ + for (i = 0; i < 2048; i++) + pgtable[2048 + i * 2] = 0x183 + (i << 21UL); +} + +int cpu_jump_to_64bit(ulong setup_base, ulong target) +{ + uint32_t *pgtable; + + pgtable = memalign(4096, PAGETABLE_SIZE); + if (!pgtable) + return -ENOMEM; + + build_pagetable(pgtable); + cpu_call64((ulong)pgtable, setup_base, target); + free(pgtable); + + return -EFAULT; +} diff --git a/arch/x86/include/asm/bootm.h b/arch/x86/include/asm/bootm.h index 033ab79516..f6a64ce2c9 100644 --- a/arch/x86/include/asm/bootm.h +++ b/arch/x86/include/asm/bootm.h @@ -9,4 +9,20 @@ void bootm_announce_and_cleanup(void); +/** + * boot_linux_kernel() - boot a linux kernel + * + * This boots a kernel image, either 32-bit or 64-bit. It will also work with + * a self-extracting kernel, if you set @image_64bit to false. + * + * @setup_base: Pointer to the setup.bin information for the kernel + * @load_address: Pointer to the start of the kernel image + * @image_64bit: true if the image is a raw 64-bit kernel, false if it + * is raw 32-bit or any type of self-extracting kernel + * such as a bzImage. + * @return -ve error code. This function does not return if the kernel was + * booted successfully. + */ +int boot_linux_kernel(ulong setup_base, ulong load_address, bool image_64bit); + #endif diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h new file mode 100644 index 0000000000..6c6774af76 --- /dev/null +++ b/arch/x86/include/asm/cpu.h @@ -0,0 +1,55 @@ +/* + * Copyright (c) 2014 The Chromium OS Authors. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __X86_CPU_H +#define __X86_CPU_H + + /** + * cpu_enable_paging_pae() - Enable PAE-paging + * + * @pdpt: Value to set in cr3 (PDPT or PML4T) + */ +void cpu_enable_paging_pae(ulong cr3); + +/** + * cpu_disable_paging_pae() - Disable paging and PAE + */ +void cpu_disable_paging_pae(void); + +/** + * cpu_has_64bit() - Check if the CPU has 64-bit support + * + * @return 1 if this CPU supports long mode (64-bit), 0 if not + */ +int cpu_has_64bit(void); + +/** + * cpu_call64() - Jump to a 64-bit Linux kernel (internal function) + * + * The kernel is uncompressed and the 64-bit entry point is expected to be + * at @target. + * + * This function is used internally - see cpu_jump_to_64bit() for a more + * useful function. + * + * @pgtable: Address of 24KB area containing the page table + * @setup_base: Pointer to the setup.bin information for the kernel + * @target: Pointer to the start of the kernel image + */ +void cpu_call64(ulong pgtable, ulong setup_base, ulong target); + +/** + * cpu_jump_to_64bit() - Jump to a 64-bit Linux kernel + * + * The kernel is uncompressed and the 64-bit entry point is expected to be + * at @target. + * + * @setup_base: Pointer to the setup.bin information for the kernel + * @target: Pointer to the start of the kernel image + */ +int cpu_jump_to_64bit(ulong setup_base, ulong target); + +#endif diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index 0a36e178f5..6027d593ff 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -44,12 +44,16 @@ #define MSR_IA32_PERFCTR0 0x000000c1 #define MSR_IA32_PERFCTR1 0x000000c2 #define MSR_FSB_FREQ 0x000000cd +#define MSR_NHM_PLATFORM_INFO 0x000000ce #define MSR_NHM_SNB_PKG_CST_CFG_CTL 0x000000e2 #define NHM_C3_AUTO_DEMOTE (1UL << 25) #define NHM_C1_AUTO_DEMOTE (1UL << 26) #define ATM_LNC_C6_AUTO_DEMOTE (1UL << 25) +#define SNB_C1_AUTO_UNDEMOTE (1UL << 27) +#define SNB_C3_AUTO_UNDEMOTE (1UL << 28) +#define MSR_PLATFORM_INFO 0x000000ce #define MSR_MTRRcap 0x000000fe #define MSR_IA32_BBL_CR_CTL 0x00000119 #define MSR_IA32_BBL_CR_CTL3 0x0000011e @@ -64,10 +68,20 @@ #define MSR_OFFCORE_RSP_0 0x000001a6 #define MSR_OFFCORE_RSP_1 0x000001a7 +#define MSR_NHM_TURBO_RATIO_LIMIT 0x000001ad +#define MSR_IVT_TURBO_RATIO_LIMIT 0x000001ae + +#define MSR_LBR_SELECT 0x000001c8 +#define MSR_LBR_TOS 0x000001c9 +#define MSR_LBR_NHM_FROM 0x00000680 +#define MSR_LBR_NHM_TO 0x000006c0 +#define MSR_LBR_CORE_FROM 0x00000040 +#define MSR_LBR_CORE_TO 0x00000060 #define MSR_IA32_PEBS_ENABLE 0x000003f1 #define MSR_IA32_DS_AREA 0x00000600 #define MSR_IA32_PERF_CAPABILITIES 0x00000345 +#define MSR_PEBS_LD_LAT_THRESHOLD 0x000003f6 #define MSR_MTRRfix64K_00000 0x00000250 #define MSR_MTRRfix16K_80000 0x00000258 @@ -91,7 +105,8 @@ #define MSR_IA32_LASTINTTOIP 0x000001de /* DEBUGCTLMSR bits (others vary by model): */ -#define DEBUGCTLMSR_LBR (1UL << 0) +#define DEBUGCTLMSR_LBR (1UL << 0) /* last branch recording */ +/* single-step on branches */ #define DEBUGCTLMSR_BTF (1UL << 1) #define DEBUGCTLMSR_TR (1UL << 6) #define DEBUGCTLMSR_BTS (1UL << 7) @@ -100,11 +115,50 @@ #define DEBUGCTLMSR_BTS_OFF_USR (1UL << 10) #define DEBUGCTLMSR_FREEZE_LBRS_ON_PMI (1UL << 11) +#define MSR_IA32_POWER_CTL 0x000001fc + #define MSR_IA32_MC0_CTL 0x00000400 #define MSR_IA32_MC0_STATUS 0x00000401 #define MSR_IA32_MC0_ADDR 0x00000402 #define MSR_IA32_MC0_MISC 0x00000403 +/* C-state Residency Counters */ +#define MSR_PKG_C3_RESIDENCY 0x000003f8 +#define MSR_PKG_C6_RESIDENCY 0x000003f9 +#define MSR_PKG_C7_RESIDENCY 0x000003fa +#define MSR_CORE_C3_RESIDENCY 0x000003fc +#define MSR_CORE_C6_RESIDENCY 0x000003fd +#define MSR_CORE_C7_RESIDENCY 0x000003fe +#define MSR_PKG_C2_RESIDENCY 0x0000060d +#define MSR_PKG_C8_RESIDENCY 0x00000630 +#define MSR_PKG_C9_RESIDENCY 0x00000631 +#define MSR_PKG_C10_RESIDENCY 0x00000632 + +/* Run Time Average Power Limiting (RAPL) Interface */ + +#define MSR_RAPL_POWER_UNIT 0x00000606 + +#define MSR_PKG_POWER_LIMIT 0x00000610 +#define MSR_PKG_ENERGY_STATUS 0x00000611 +#define MSR_PKG_PERF_STATUS 0x00000613 +#define MSR_PKG_POWER_INFO 0x00000614 + +#define MSR_DRAM_POWER_LIMIT 0x00000618 +#define MSR_DRAM_ENERGY_STATUS 0x00000619 +#define MSR_DRAM_PERF_STATUS 0x0000061b +#define MSR_DRAM_POWER_INFO 0x0000061c + +#define MSR_PP0_POWER_LIMIT 0x00000638 +#define MSR_PP0_ENERGY_STATUS 0x00000639 +#define MSR_PP0_POLICY 0x0000063a +#define MSR_PP0_PERF_STATUS 0x0000063b + +#define MSR_PP1_POWER_LIMIT 0x00000640 +#define MSR_PP1_ENERGY_STATUS 0x00000641 +#define MSR_PP1_POLICY 0x00000642 + +#define MSR_CORE_C1_RES 0x00000660 + #define MSR_AMD64_MC0_MASK 0xc0010044 #define MSR_IA32_MCx_CTL(x) (MSR_IA32_MC0_CTL + 4*(x)) @@ -123,18 +177,31 @@ #define MSR_P6_EVNTSEL0 0x00000186 #define MSR_P6_EVNTSEL1 0x00000187 +#define MSR_KNC_PERFCTR0 0x00000020 +#define MSR_KNC_PERFCTR1 0x00000021 +#define MSR_KNC_EVNTSEL0 0x00000028 +#define MSR_KNC_EVNTSEL1 0x00000029 + +/* Alternative perfctr range with full access. */ +#define MSR_IA32_PMC0 0x000004c1 + /* AMD64 MSRs. Not complete. See the architecture manual for a more complete list. */ #define MSR_AMD64_PATCH_LEVEL 0x0000008b +#define MSR_AMD64_TSC_RATIO 0xc0000104 #define MSR_AMD64_NB_CFG 0xc001001f #define MSR_AMD64_PATCH_LOADER 0xc0010020 #define MSR_AMD64_OSVW_ID_LENGTH 0xc0010140 #define MSR_AMD64_OSVW_STATUS 0xc0010141 +#define MSR_AMD64_LS_CFG 0xc0011020 #define MSR_AMD64_DC_CFG 0xc0011022 +#define MSR_AMD64_BU_CFG2 0xc001102a #define MSR_AMD64_IBSFETCHCTL 0xc0011030 #define MSR_AMD64_IBSFETCHLINAD 0xc0011031 #define MSR_AMD64_IBSFETCHPHYSAD 0xc0011032 +#define MSR_AMD64_IBSFETCH_REG_COUNT 3 +#define MSR_AMD64_IBSFETCH_REG_MASK ((1UL<<MSR_AMD64_IBSFETCH_REG_COUNT)-1) #define MSR_AMD64_IBSOPCTL 0xc0011033 #define MSR_AMD64_IBSOPRIP 0xc0011034 #define MSR_AMD64_IBSOPDATA 0xc0011035 @@ -142,12 +209,21 @@ #define MSR_AMD64_IBSOPDATA3 0xc0011037 #define MSR_AMD64_IBSDCLINAD 0xc0011038 #define MSR_AMD64_IBSDCPHYSAD 0xc0011039 +#define MSR_AMD64_IBSOP_REG_COUNT 7 +#define MSR_AMD64_IBSOP_REG_MASK ((1UL<<MSR_AMD64_IBSOP_REG_COUNT)-1) #define MSR_AMD64_IBSCTL 0xc001103a #define MSR_AMD64_IBSBRTARGET 0xc001103b +#define MSR_AMD64_IBS_REG_COUNT_MAX 8 /* includes MSR_AMD64_IBSBRTARGET */ + +/* Fam 16h MSRs */ +#define MSR_F16H_L2I_PERF_CTL 0xc0010230 +#define MSR_F16H_L2I_PERF_CTR 0xc0010231 /* Fam 15h MSRs */ #define MSR_F15H_PERF_CTL 0xc0010200 #define MSR_F15H_PERF_CTR 0xc0010201 +#define MSR_F15H_NB_PERF_CTL 0xc0010240 +#define MSR_F15H_NB_PERF_CTR 0xc0010241 /* Fam 10h MSRs */ #define MSR_FAM10H_MMIO_CONF_BASE 0xc0010058 @@ -226,7 +302,9 @@ #define MSR_IA32_PLATFORM_ID 0x00000017 #define MSR_IA32_EBL_CR_POWERON 0x0000002a #define MSR_EBC_FREQUENCY_ID 0x0000002c +#define MSR_SMI_COUNT 0x00000034 #define MSR_IA32_FEATURE_CONTROL 0x0000003a +#define MSR_IA32_TSC_ADJUST 0x0000003b #define FEATURE_CONTROL_LOCKED (1<<0) #define FEATURE_CONTROL_VMXON_ENABLED_INSIDE_SMX (1<<1) @@ -237,11 +315,16 @@ #define MSR_IA32_APICBASE_ENABLE (1<<11) #define MSR_IA32_APICBASE_BASE (0xfffff<<12) +#define MSR_IA32_TSCDEADLINE 0x000006e0 + #define MSR_IA32_UCODE_WRITE 0x00000079 #define MSR_IA32_UCODE_REV 0x0000008b #define MSR_IA32_PERF_STATUS 0x00000198 #define MSR_IA32_PERF_CTL 0x00000199 +#define MSR_AMD_PSTATE_DEF_BASE 0xc0010064 +#define MSR_AMD_PERF_STATUS 0xc0010063 +#define MSR_AMD_PERF_CTL 0xc0010062 #define MSR_IA32_MPERF 0x000000e7 #define MSR_IA32_APERF 0x000000e8 @@ -267,6 +350,9 @@ #define MSR_IA32_TEMPERATURE_TARGET 0x000001a2 #define MSR_IA32_ENERGY_PERF_BIAS 0x000001b0 +#define ENERGY_PERF_BIAS_PERFORMANCE 0 +#define ENERGY_PERF_BIAS_NORMAL 6 +#define ENERGY_PERF_BIAS_POWERSAVE 15 #define MSR_IA32_PACKAGE_THERM_STATUS 0x000001b1 @@ -320,6 +406,8 @@ #define MSR_IA32_MISC_ENABLE_TURBO_DISABLE (1ULL << 38) #define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE (1ULL << 39) +#define MSR_IA32_TSC_DEADLINE 0x000006E0 + /* P4/Xeon+ specific */ #define MSR_IA32_MCG_EAX 0x00000180 #define MSR_IA32_MCG_EBX 0x00000181 @@ -446,7 +534,23 @@ #define MSR_IA32_VMX_VMCS_ENUM 0x0000048a #define MSR_IA32_VMX_PROCBASED_CTLS2 0x0000048b #define MSR_IA32_VMX_EPT_VPID_CAP 0x0000048c - +#define MSR_IA32_VMX_TRUE_PINBASED_CTLS 0x0000048d +#define MSR_IA32_VMX_TRUE_PROCBASED_CTLS 0x0000048e +#define MSR_IA32_VMX_TRUE_EXIT_CTLS 0x0000048f +#define MSR_IA32_VMX_TRUE_ENTRY_CTLS 0x00000490 +#define MSR_IA32_VMX_VMFUNC 0x00000491 + +/* VMX_BASIC bits and bitmasks */ +#define VMX_BASIC_VMCS_SIZE_SHIFT 32 +#define VMX_BASIC_64 0x0001000000000000LLU +#define VMX_BASIC_MEM_TYPE_SHIFT 50 +#define VMX_BASIC_MEM_TYPE_MASK 0x003c000000000000LLU +#define VMX_BASIC_MEM_TYPE_WB 6LLU +#define VMX_BASIC_INOUT 0x0040000000000000LLU + +/* MSR_IA32_VMX_MISC bits */ +#define MSR_IA32_VMX_MISC_VMWRITE_SHADOW_RO_FIELDS (1ULL << 29) +#define MSR_IA32_VMX_MISC_PREEMPTION_TIMER_SCALE 0x1F /* AMD-V MSRs */ #define MSR_VM_CR 0xc0010114 diff --git a/arch/x86/include/asm/zimage.h b/arch/x86/include/asm/zimage.h index 0f36662688..8e7dd424ca 100644 --- a/arch/x86/include/asm/zimage.h +++ b/arch/x86/include/asm/zimage.h @@ -35,10 +35,8 @@ unsigned install_e820_map(unsigned max_entries, struct e820entry *); struct boot_params *load_zimage(char *image, unsigned long kernel_size, - void **load_address); + ulong *load_addressp); int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot, unsigned long initrd_addr, unsigned long initrd_size); -void boot_zimage(void *setup_base, void *load_address); - #endif diff --git a/arch/x86/lib/bootm.c b/arch/x86/lib/bootm.c index 4c5c7f5aa7..86030cf52a 100644 --- a/arch/x86/lib/bootm.c +++ b/arch/x86/lib/bootm.c @@ -10,10 +10,12 @@ #include <common.h> #include <command.h> +#include <errno.h> #include <fdt_support.h> #include <image.h> #include <u-boot/zlib.h> #include <asm/bootparam.h> +#include <asm/cpu.h> #include <asm/byteorder.h> #include <asm/zimage.h> #ifdef CONFIG_SYS_COREBOOT @@ -109,17 +111,17 @@ static int boot_prep_linux(bootm_headers_t *images) } if (is_zimage) { - void *load_address; + ulong load_address; char *base_ptr; base_ptr = (char *)load_zimage(data, len, &load_address); - images->os.load = (ulong)load_address; + images->os.load = load_address; cmd_line_dest = base_ptr + COMMAND_LINE_OFFSET; images->ep = (ulong)base_ptr; } else if (images->ep) { cmd_line_dest = (void *)images->ep + COMMAND_LINE_OFFSET; } else { - printf("## Kernel loading failed (no setup) ...\n"); + printf("## Kernel loading failed (missing x86 kernel setup) ...\n"); goto error; } @@ -139,16 +141,50 @@ error: return 1; } +int boot_linux_kernel(ulong setup_base, ulong load_address, bool image_64bit) +{ + bootm_announce_and_cleanup(); + +#ifdef CONFIG_SYS_COREBOOT + timestamp_add_now(TS_U_BOOT_START_KERNEL); +#endif + if (image_64bit) { + if (!cpu_has_64bit()) { + puts("Cannot boot 64-bit kernel on 32-bit machine\n"); + return -EFAULT; + } + return cpu_jump_to_64bit(setup_base, load_address); + } else { + /* + * Set %ebx, %ebp, and %edi to 0, %esi to point to the + * boot_params structure, and then jump to the kernel. We + * assume that %cs is 0x10, 4GB flat, and read/execute, and + * the data segments are 0x18, 4GB flat, and read/write. + * U-boot is setting them up that way for itself in + * arch/i386/cpu/cpu.c. + */ + __asm__ __volatile__ ( + "movl $0, %%ebp\n" + "cli\n" + "jmp *%[kernel_entry]\n" + :: [kernel_entry]"a"(load_address), + [boot_params] "S"(setup_base), + "b"(0), "D"(0) + ); + } + + /* We can't get to here */ + return -EFAULT; +} + /* Subcommand: GO */ static int boot_jump_linux(bootm_headers_t *images) { debug("## Transferring control to Linux (at address %08lx, kernel %08lx) ...\n", images->ep, images->os.load); - boot_zimage((struct boot_params *)images->ep, (void *)images->os.load); - /* does not return */ - - return 1; + return boot_linux_kernel(images->ep, images->os.load, + images->os.arch == IH_ARCH_X86_64); } int do_bootm_linux(int flag, int argc, char * const argv[], @@ -161,10 +197,8 @@ int do_bootm_linux(int flag, int argc, char * const argv[], if (flag & BOOTM_STATE_OS_PREP) return boot_prep_linux(images); - if (flag & BOOTM_STATE_OS_GO) { - boot_jump_linux(images); - return 0; - } + if (flag & BOOTM_STATE_OS_GO) + return boot_jump_linux(images); return boot_jump_linux(images); } diff --git a/arch/x86/lib/physmem.c b/arch/x86/lib/physmem.c index b57b2c30fe..c3c709ec07 100644 --- a/arch/x86/lib/physmem.c +++ b/arch/x86/lib/physmem.c @@ -10,6 +10,7 @@ #include <common.h> #include <physmem.h> +#include <asm/cpu.h> #include <linux/compiler.h> DECLARE_GLOBAL_DATA_PTR; @@ -112,41 +113,13 @@ static void x86_phys_enter_paging(void) x86_phys_map_page(page_addr, page_addr, 0); } - /* Turn on paging */ - __asm__ __volatile__( - /* Load the page table address */ - "movl %0, %%cr3\n\t" - /* Enable pae */ - "movl %%cr4, %%eax\n\t" - "orl $0x00000020, %%eax\n\t" - "movl %%eax, %%cr4\n\t" - /* Enable paging */ - "movl %%cr0, %%eax\n\t" - "orl $0x80000000, %%eax\n\t" - "movl %%eax, %%cr0\n\t" - : - : "r" (pdpt) - : "eax" - ); + cpu_enable_paging_pae((ulong)pdpt); } /* Disable paging and PAE mode. */ static void x86_phys_exit_paging(void) { - /* Turn off paging */ - __asm__ __volatile__ ( - /* Disable paging */ - "movl %%cr0, %%eax\n\t" - "andl $0x7fffffff, %%eax\n\t" - "movl %%eax, %%cr0\n\t" - /* Disable pae */ - "movl %%cr4, %%eax\n\t" - "andl $0xffffffdf, %%eax\n\t" - "movl %%eax, %%cr4\n\t" - : - : - : "eax" - ); + cpu_disable_paging_pae(); } /* diff --git a/arch/x86/lib/zimage.c b/arch/x86/lib/zimage.c index b1902834e8..566b048c88 100644 --- a/arch/x86/lib/zimage.c +++ b/arch/x86/lib/zimage.c @@ -103,7 +103,7 @@ static int get_boot_protocol(struct setup_header *hdr) } struct boot_params *load_zimage(char *image, unsigned long kernel_size, - void **load_address) + ulong *load_addressp) { struct boot_params *setup_base; int setup_size; @@ -155,9 +155,9 @@ struct boot_params *load_zimage(char *image, unsigned long kernel_size, /* Determine load address */ if (big_image) - *load_address = (void *)BZIMAGE_LOAD_ADDR; + *load_addressp = BZIMAGE_LOAD_ADDR; else - *load_address = (void *)ZIMAGE_LOAD_ADDR; + *load_addressp = ZIMAGE_LOAD_ADDR; printf("Building boot_params at 0x%8.8lx\n", (ulong)setup_base); memset(setup_base, 0, sizeof(*setup_base)); @@ -204,10 +204,10 @@ struct boot_params *load_zimage(char *image, unsigned long kernel_size, return 0; } - printf("Loading %s at address %p (%ld bytes)\n", - big_image ? "bzImage" : "zImage", *load_address, kernel_size); + printf("Loading %s at address %lx (%ld bytes)\n", + big_image ? "bzImage" : "zImage", *load_addressp, kernel_size); - memmove(*load_address, image + setup_size, kernel_size); + memmove((void *)*load_addressp, image + setup_size, kernel_size); return setup_base; } @@ -261,30 +261,6 @@ int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot, return 0; } -void boot_zimage(void *setup_base, void *load_address) -{ - bootm_announce_and_cleanup(); - -#ifdef CONFIG_SYS_COREBOOT - timestamp_add_now(TS_U_BOOT_START_KERNEL); -#endif - /* - * Set %ebx, %ebp, and %edi to 0, %esi to point to the boot_params - * structure, and then jump to the kernel. We assume that %cs is - * 0x10, 4GB flat, and read/execute, and the data segments are 0x18, - * 4GB flat, and read/write. U-boot is setting them up that way for - * itself in arch/i386/cpu/cpu.c. - */ - __asm__ __volatile__ ( - "movl $0, %%ebp\n" - "cli\n" - "jmp *%[kernel_entry]\n" - :: [kernel_entry]"a"(load_address), - [boot_params] "S"(setup_base), - "b"(0), "D"(0) - ); -} - void setup_pcat_compatibility(void) __attribute__((weak, alias("__setup_pcat_compatibility"))); @@ -296,7 +272,7 @@ int do_zboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { struct boot_params *base_ptr; void *bzImage_addr = NULL; - void *load_address; + ulong load_address; char *s; ulong bzImage_size = 0; ulong initrd_addr = 0; @@ -331,20 +307,17 @@ int do_zboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) base_ptr = load_zimage(bzImage_addr, bzImage_size, &load_address); if (!base_ptr) { - printf("## Kernel loading failed ...\n"); + puts("## Kernel loading failed ...\n"); return -1; } if (setup_zimage(base_ptr, (char *)base_ptr + COMMAND_LINE_OFFSET, 0, initrd_addr, initrd_size)) { - printf("Setting up boot parameters failed ...\n"); + puts("Setting up boot parameters failed ...\n"); return -1; } /* we assume that the kernel is in place */ - boot_zimage(base_ptr, load_address); - /* does not return */ - - return -1; + return boot_linux_kernel((ulong)base_ptr, load_address, false); } U_BOOT_CMD( diff --git a/board/altera/socfpga/socfpga_cyclone5.c b/board/altera/socfpga/socfpga_cyclone5.c index 0f81d899a6..ce625e54d0 100644 --- a/board/altera/socfpga/socfpga_cyclone5.c +++ b/board/altera/socfpga/socfpga_cyclone5.c @@ -8,6 +8,10 @@ #include <asm/arch/reset_manager.h> #include <asm/io.h> +#include <usb.h> +#include <usb/s3c_udc.h> +#include <usb_mass_storage.h> + #include <netdev.h> DECLARE_GLOBAL_DATA_PTR; @@ -39,3 +43,20 @@ int board_init(void) return 0; } + +#ifdef CONFIG_USB_GADGET +struct s3c_plat_otg_data socfpga_otg_data = { + .regs_otg = CONFIG_USB_DWC2_REG_ADDR, + .usb_gusbcfg = 0x1417, +}; + +int board_usb_init(int index, enum usb_init_type init) +{ + return s3c_udc_probe(&socfpga_otg_data); +} + +int g_dnl_board_usb_cable_connected(void) +{ + return 1; +} +#endif diff --git a/board/aristainetos/aristainetos.c b/board/aristainetos/aristainetos.c index 3bfcf5b0da..06922c0020 100644 --- a/board/aristainetos/aristainetos.c +++ b/board/aristainetos/aristainetos.c @@ -230,6 +230,12 @@ static iomux_v3_cfg_t const backlight_pads[] = { MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), }; +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == CONFIG_SF_DEFAULT_BUS && cs == CONFIG_SF_DEFAULT_CS) + ? (IMX_GPIO_NR(3, 20)) : -1; +} + static void setup_spi(void) { int i; diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c index acf95cb372..2ed8cf75d6 100644 --- a/board/bachmann/ot1200/ot1200.c +++ b/board/bachmann/ot1200/ot1200.c @@ -104,10 +104,25 @@ int board_spi_cs_gpio(unsigned bus, unsigned cs) return (bus == 2 && cs == 0) ? (IMX_GPIO_NR(1, 3)) : -1; } +static iomux_v3_cfg_t const feature_pads[] = { + /* SD card detect */ + MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(PAD_CTL_PUS_100K_DOWN), + + /* eMMC soldered? */ + MX6_PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(PAD_CTL_PUS_100K_UP), +}; + +static void setup_iomux_features(void) +{ + imx_iomux_v3_setup_multiple_pads(feature_pads, + ARRAY_SIZE(feature_pads)); +} + int board_early_init_f(void) { setup_iomux_uart(); setup_iomux_spi(); + setup_iomux_features(); return 0; } @@ -126,23 +141,68 @@ static iomux_v3_cfg_t const usdhc3_pads[] = { MX6_PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; +iomux_v3_cfg_t const usdhc4_pads[] = { + MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + int board_mmc_getcd(struct mmc *mmc) { - return 1; + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret; + + if (cfg->esdhc_base == USDHC3_BASE_ADDR) { + gpio_direction_input(IMX_GPIO_NR(4, 5)); + ret = gpio_get_value(IMX_GPIO_NR(4, 5)); + } else { + gpio_direction_input(IMX_GPIO_NR(1, 4)); + ret = !gpio_get_value(IMX_GPIO_NR(1, 4)); + } + + return ret; } -struct fsl_esdhc_cfg usdhc_cfg[] = { +struct fsl_esdhc_cfg usdhc_cfg[2] = { {USDHC3_BASE_ADDR}, + {USDHC4_BASE_ADDR}, }; int board_mmc_init(bd_t *bis) { + s32 status = 0; + u32 index = 0; + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - usdhc_cfg[0].max_bus_width = 8; + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + usdhc_cfg[0].max_bus_width = 8; + usdhc_cfg[1].max_bus_width = 4; + + for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { + switch (index) { + case 0: + imx_iomux_v3_setup_multiple_pads( + usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + break; + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); + break; + default: + printf("Warning: you configured more USDHC controllers" + "(%d) then supported by the board (%d)\n", + index + 1, CONFIG_SYS_FSL_USDHC_NUM); + return status; + } + + status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); + } - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); + return status; } #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) diff --git a/board/cogent/lcd.c b/board/cogent/lcd.c index 8e90f9853a..05ffc4d1ac 100644 --- a/board/cogent/lcd.c +++ b/board/cogent/lcd.c @@ -234,7 +234,7 @@ lcd_heartbeat(void) void board_show_activity (ulong timestamp) { #ifdef CONFIG_STATUS_LED - if ((timestamp % (CONFIG_SYS_HZ / 2) == 0) + if ((timestamp % (CONFIG_SYS_HZ / 2)) == 0) lcd_heartbeat (); #endif } diff --git a/board/compulab/cm_fx6/cm_fx6.c b/board/compulab/cm_fx6/cm_fx6.c index 82681b10eb..0206ae81fc 100644 --- a/board/compulab/cm_fx6/cm_fx6.c +++ b/board/compulab/cm_fx6/cm_fx6.c @@ -31,12 +31,12 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_DWC_AHSATA static int cm_fx6_issd_gpios[] = { /* The order of the GPIOs in the array is important! */ + CM_FX6_SATA_LDO_EN, CM_FX6_SATA_PHY_SLP, CM_FX6_SATA_NRSTDLY, CM_FX6_SATA_PWREN, CM_FX6_SATA_NSTANDBY1, CM_FX6_SATA_NSTANDBY2, - CM_FX6_SATA_LDO_EN, }; static void cm_fx6_sata_power(int on) diff --git a/board/compulab/cm_fx6/spl.c b/board/compulab/cm_fx6/spl.c index 3948ba23ae..6fe937b418 100644 --- a/board/compulab/cm_fx6/spl.c +++ b/board/compulab/cm_fx6/spl.c @@ -235,10 +235,11 @@ static int cm_fx6_spl_dram_init(void) spl_mx6s_dram_init(DDR_32BIT_1GB, false); bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000); - if (bank1_size == 0x40000000) - return 0; - + bank2_size = get_ram_size((long int *)PHYS_SDRAM_2, 0x80000000); if (bank1_size == 0x20000000) { + if (bank2_size == 0x20000000) + return 0; + spl_mx6s_dram_init(DDR_32BIT_512MB, true); return 0; } diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c index d0b0930f42..886c723900 100644 --- a/board/compulab/cm_t35/cm_t35.c +++ b/board/compulab/cm_t35/cm_t35.c @@ -19,12 +19,11 @@ #include <i2c.h> #include <usb.h> #include <mmc.h> -#include <nand.h> #include <twl4030.h> -#include <bmp_layout.h> #include <linux/compiler.h> #include <asm/io.h> +#include <asm/errno.h> #include <asm/arch/mem.h> #include <asm/arch/mux.h> #include <asm/arch/mmc_host_def.h> @@ -33,6 +32,7 @@ #include <asm/ehci-omap.h> #include <asm/gpio.h> +#include "../common/common.h" #include "../common/eeprom.h" DECLARE_GLOBAL_DATA_PTR; @@ -43,58 +43,6 @@ const omap3_sysinfo sysinfo = { "NAND", }; -static u32 gpmc_net_config[GPMC_MAX_REG] = { - NET_GPMC_CONFIG1, - NET_GPMC_CONFIG2, - NET_GPMC_CONFIG3, - NET_GPMC_CONFIG4, - NET_GPMC_CONFIG5, - NET_GPMC_CONFIG6, - 0 -}; - -#ifdef CONFIG_LCD -#ifdef CONFIG_CMD_NAND -static int splash_load_from_nand(u32 bmp_load_addr) -{ - struct bmp_header *bmp_hdr; - int res, splash_screen_nand_offset = 0x100000; - size_t bmp_size, bmp_header_size = sizeof(struct bmp_header); - - if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp) - goto splash_address_too_high; - - res = nand_read_skip_bad(&nand_info[nand_curr_device], - splash_screen_nand_offset, &bmp_header_size, - NULL, nand_info[nand_curr_device].size, - (u_char *)bmp_load_addr); - if (res < 0) - return res; - - bmp_hdr = (struct bmp_header *)bmp_load_addr; - bmp_size = le32_to_cpu(bmp_hdr->file_size); - - if (bmp_load_addr + bmp_size >= gd->start_addr_sp) - goto splash_address_too_high; - - return nand_read_skip_bad(&nand_info[nand_curr_device], - splash_screen_nand_offset, &bmp_size, - NULL, nand_info[nand_curr_device].size, - (u_char *)bmp_load_addr); - -splash_address_too_high: - printf("Error: splashimage address too high. Data overwrites U-Boot " - "and/or placed beyond DRAM boundaries.\n"); - - return -1; -} -#else -static inline int splash_load_from_nand(void) -{ - return -1; -} -#endif /* CONFIG_CMD_NAND */ - #ifdef CONFIG_SPL_BUILD /* * Routine: get_board_mem_timings @@ -111,24 +59,12 @@ void get_board_mem_timings(struct board_sdrc_timings *timings) } #endif +#define CM_T35_SPLASH_NAND_OFFSET 0x100000 + int splash_screen_prepare(void) { - char *env_splashimage_value; - u32 bmp_load_addr; - - env_splashimage_value = getenv("splashimage"); - if (env_splashimage_value == NULL) - return -1; - - bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16); - if (bmp_load_addr == 0) { - printf("Error: bad splashimage address specified\n"); - return -1; - } - - return splash_load_from_nand(bmp_load_addr); + return cl_splash_screen_prepare(CM_T35_SPLASH_NAND_OFFSET); } -#endif /* CONFIG_LCD */ /* * Routine: board_init @@ -154,34 +90,18 @@ int board_init(void) return 0; } -static u32 cm_t3x_rev; - /* * Routine: get_board_rev * Description: read system revision */ u32 get_board_rev(void) { - if (!cm_t3x_rev) - cm_t3x_rev = cl_eeprom_get_board_rev(); - - return cm_t3x_rev; + return cl_eeprom_get_board_rev(); }; -/* - * Routine: misc_init_r - * Description: display die ID - */ int misc_init_r(void) { - u32 board_rev = get_board_rev(); - u32 rev_major = board_rev / 100; - u32 rev_minor = board_rev - (rev_major * 100); - - if ((rev_minor / 10) * 10 == rev_minor) - rev_minor = rev_minor / 10; - - printf("PCB: %u.%u\n", rev_major, rev_minor); + cl_print_pcb_info(); dieid_num_r(); return 0; @@ -462,37 +382,12 @@ int board_mmc_init(bd_t *bis) } #endif -/* - * Routine: setup_net_chip_gmpc - * Description: Setting up the configuration GPMC registers specific to the - * Ethernet hardware. - */ -static void setup_net_chip_gmpc(void) -{ - struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; - - enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5], - CM_T3X_SMC911X_BASE, GPMC_SIZE_16M); - enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4], - SB_T35_SMC911X_BASE, GPMC_SIZE_16M); - - /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ - writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); - - /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); - - /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, - &ctrl_base->gpmc_nadv_ale); -} - #ifdef CONFIG_SYS_I2C_OMAP34XX /* * Routine: reset_net_chip * Description: reset the Ethernet controller via TPS65930 GPIO */ -static void reset_net_chip(void) +static int cm_t3x_reset_net_chip(int gpio) { /* Set GPIO1 of TPS65930 as output */ twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x03, @@ -507,9 +402,10 @@ static void reset_net_chip(void) twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x0C, 0x02); mdelay(1); + return 0; } #else -static inline void reset_net_chip(void) {} +static inline int cm_t3x_reset_net_chip(int gpio) { return 0; } #endif #ifdef CONFIG_SMC911X @@ -536,7 +432,6 @@ static int handle_mac_address(void) return eth_setenv_enetaddr("ethaddr", enetaddr); } - /* * Routine: board_eth_init * Description: initialize module and base-board Ethernet chips @@ -545,18 +440,16 @@ int board_eth_init(bd_t *bis) { int rc = 0, rc1 = 0; - setup_net_chip_gmpc(); - reset_net_chip(); - rc1 = handle_mac_address(); if (rc1) printf("No MAC address found! "); - rc1 = smc911x_initialize(0, CM_T3X_SMC911X_BASE); + rc1 = cl_omap3_smc911x_init(0, 5, CM_T3X_SMC911X_BASE, + cm_t3x_reset_net_chip, -EINVAL); if (rc1 > 0) rc++; - rc1 = smc911x_initialize(1, SB_T35_SMC911X_BASE); + rc1 = cl_omap3_smc911x_init(1, 4, SB_T35_SMC911X_BASE, NULL, -EINVAL); if (rc1 > 0) rc++; @@ -564,16 +457,6 @@ int board_eth_init(bd_t *bis) } #endif -void __weak get_board_serial(struct tag_serialnr *serialnr) -{ - /* - * This corresponds to what happens when we can communicate with the - * eeprom but don't get a valid board serial value. - */ - serialnr->low = 0; - serialnr->high = 0; -}; - #ifdef CONFIG_USB_EHCI_OMAP struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -583,21 +466,12 @@ struct omap_usbhs_board_data usbhs_bdata = { #define SB_T35_USB_HUB_RESET_GPIO 167 int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) + struct ehci_hccr **hccr, struct ehci_hcor **hcor) { u8 val; int offset; - if (gpio_request(SB_T35_USB_HUB_RESET_GPIO, "SB-T35 usb hub reset")) { - printf("Error: can't obtain GPIO %d for SB-T35 usb hub reset", - SB_T35_USB_HUB_RESET_GPIO); - return -1; - } - - gpio_direction_output(SB_T35_USB_HUB_RESET_GPIO, 0); - udelay(10); - gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1); - udelay(1000); + cl_usb_hub_init(SB_T35_USB_HUB_RESET_GPIO, "sb-t35 hub rst"); offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_GPIODATADIR1; twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, offset, &val); @@ -614,6 +488,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, int ehci_hcd_stop(void) { + cl_usb_hub_deinit(SB_T35_USB_HUB_RESET_GPIO); return omap_ehci_hcd_stop(); } #endif /* CONFIG_USB_EHCI_OMAP */ diff --git a/board/compulab/cm_t3517/Kconfig b/board/compulab/cm_t3517/Kconfig new file mode 100644 index 0000000000..2f5473d76a --- /dev/null +++ b/board/compulab/cm_t3517/Kconfig @@ -0,0 +1,12 @@ +if TARGET_CM_T3517 + +config SYS_BOARD + default "cm_t3517" + +config SYS_VENDOR + default "compulab" + +config SYS_CONFIG_NAME + default "cm_t3517" + +endif diff --git a/board/compulab/cm_t3517/MAINTAINERS b/board/compulab/cm_t3517/MAINTAINERS new file mode 100644 index 0000000000..fbb6882138 --- /dev/null +++ b/board/compulab/cm_t3517/MAINTAINERS @@ -0,0 +1,6 @@ +CM_T3517 BOARD +M: Igor Grinberg <grinberg@compulab.co.il> +S: Maintained +F: board/compulab/cm_t3517/ +F: include/configs/cm_t3517.h +F: configs/cm_t3517_defconfig diff --git a/board/compulab/cm_t3517/Makefile b/board/compulab/cm_t3517/Makefile new file mode 100644 index 0000000000..4f0db01e37 --- /dev/null +++ b/board/compulab/cm_t3517/Makefile @@ -0,0 +1,9 @@ +# +# (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> +# +# Authors: Igor Grinberg <grinberg@compulab.co.il> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += cm_t3517.o mux.o diff --git a/board/compulab/cm_t3517/cm_t3517.c b/board/compulab/cm_t3517/cm_t3517.c new file mode 100644 index 0000000000..cac1ad9ef1 --- /dev/null +++ b/board/compulab/cm_t3517/cm_t3517.c @@ -0,0 +1,231 @@ +/* + * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Igor Grinberg <grinberg@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <status_led.h> +#include <net.h> +#include <netdev.h> +#include <usb.h> +#include <mmc.h> +#include <linux/compiler.h> +#include <linux/usb/musb.h> + +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/am35x_def.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/musb.h> +#include <asm/omap_musb.h> +#include <asm/ehci-omap.h> + +#include "../common/common.h" +#include "../common/eeprom.h" + +DECLARE_GLOBAL_DATA_PTR; + +const omap3_sysinfo sysinfo = { + DDR_DISCRETE, + "CM-T3517 board", + "NAND 128/512M", +}; + +#ifdef CONFIG_USB_MUSB_AM35X +static struct musb_hdrc_config cm_t3517_musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 16, + .ram_bits = 12, +}; + +static struct omap_musb_board_data cm_t3517_musb_board_data = { + .set_phy_power = am35x_musb_phy_power, + .clear_irq = am35x_musb_clear_irq, + .reset = am35x_musb_reset, +}; + +static struct musb_hdrc_platform_data cm_t3517_musb_pdata = { +#if defined(CONFIG_MUSB_HOST) + .mode = MUSB_HOST, +#elif defined(CONFIG_MUSB_GADGET) + .mode = MUSB_PERIPHERAL, +#else +#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET" +#endif + .config = &cm_t3517_musb_config, + .power = 250, + .platform_ops = &am35x_ops, + .board_data = &cm_t3517_musb_board_data, +}; + +static void cm_t3517_musb_init(void) +{ + /* + * Set up USB clock/mode in the DEVCONF2 register. + * USB2.0 PHY reference clock is 13 MHz + */ + clrsetbits_le32(&am35x_scm_general_regs->devconf2, + CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE, + CONF2_REFFREQ_13MHZ | CONF2_SESENDEN | + CONF2_VBDTCTEN | CONF2_DATPOL); + + if (musb_register(&cm_t3517_musb_pdata, &cm_t3517_musb_board_data, + (void *)AM35XX_IPSS_USBOTGSS_BASE)) + printf("Failed initializing AM35x MUSB!\n"); +} +#else +static inline void am3517_evm_musb_init(void) {} +#endif + +int board_init(void) +{ + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + +#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) + status_led_set(STATUS_LED_BOOT, STATUS_LED_ON); +#endif + + cm_t3517_musb_init(); + + return 0; +} + +int misc_init_r(void) +{ + cl_print_pcb_info(); + dieid_num_r(); + + return 0; +} + +#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) +#define SB_T35_CD_GPIO 144 +#define SB_T35_WP_GPIO 59 + +int board_mmc_init(bd_t *bis) +{ + return omap_mmc_init(0, 0, 0, SB_T35_CD_GPIO, SB_T35_WP_GPIO); +} +#endif + +#ifdef CONFIG_DRIVER_TI_EMAC +#define CONTROL_EFUSE_EMAC_LSB 0x48002380 +#define CONTROL_EFUSE_EMAC_MSB 0x48002384 + +static int am3517_get_efuse_enetaddr(u8 *enetaddr) +{ + u32 lsb = __raw_readl(CONTROL_EFUSE_EMAC_LSB); + u32 msb = __raw_readl(CONTROL_EFUSE_EMAC_MSB); + + enetaddr[0] = (u8)((msb >> 16) & 0xff); + enetaddr[1] = (u8)((msb >> 8) & 0xff); + enetaddr[2] = (u8)(msb & 0xff); + enetaddr[3] = (u8)((lsb >> 16) & 0xff); + enetaddr[4] = (u8)((lsb >> 8) & 0xff); + enetaddr[5] = (u8)(lsb & 0xff); + + return is_valid_ether_addr(enetaddr); +} + +static inline int cm_t3517_init_emac(bd_t *bis) +{ + int ret = cpu_eth_init(bis); + + if (ret > 0) + return ret; + + printf("Failed initializing EMAC! "); + return 0; +} +#else /* !CONFIG_DRIVER_TI_EMAC */ +static inline int am3517_get_efuse_enetaddr(u8 *enetaddr) { return 1; } +static inline int cm_t3517_init_emac(bd_t *bis) { return 0; } +#endif /* CONFIG_DRIVER_TI_EMAC */ + +/* + * Routine: handle_mac_address + * Description: prepare MAC address for on-board Ethernet. + */ +static int cm_t3517_handle_mac_address(void) +{ + unsigned char enetaddr[6]; + int ret; + + ret = eth_getenv_enetaddr("ethaddr", enetaddr); + if (ret) + return 0; + + ret = cl_eeprom_read_mac_addr(enetaddr); + if (ret) { + ret = am3517_get_efuse_enetaddr(enetaddr); + if (ret) + return ret; + } + + if (!is_valid_ether_addr(enetaddr)) + return -1; + + return eth_setenv_enetaddr("ethaddr", enetaddr); +} + +#define SB_T35_ETH_RST_GPIO 164 + +/* + * Routine: board_eth_init + * Description: initialize module and base-board Ethernet chips + */ +int board_eth_init(bd_t *bis) +{ + int rc = 0, rc1 = 0; + + rc1 = cm_t3517_handle_mac_address(); + if (rc1) + printf("No MAC address found! "); + + rc1 = cm_t3517_init_emac(bis); + if (rc1 > 0) + rc++; + + rc1 = cl_omap3_smc911x_init(0, 4, CONFIG_SMC911X_BASE, + NULL, SB_T35_ETH_RST_GPIO); + if (rc1 > 0) + rc++; + + return rc; +} + +#ifdef CONFIG_USB_EHCI_OMAP +static struct omap_usbhs_board_data cm_t3517_usbhs_bdata = { + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, +}; + +#define CM_T3517_USB_HUB_RESET_GPIO 152 +#define SB_T35_USB_HUB_RESET_GPIO 98 + +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + cl_usb_hub_init(CM_T3517_USB_HUB_RESET_GPIO, "cm-t3517 hub rst"); + cl_usb_hub_init(SB_T35_USB_HUB_RESET_GPIO, "sb-t35 hub rst"); + + return omap_ehci_hcd_init(index, &cm_t3517_usbhs_bdata, hccr, hcor); +} + +int ehci_hcd_stop(void) +{ + cl_usb_hub_deinit(CM_T3517_USB_HUB_RESET_GPIO); + cl_usb_hub_deinit(SB_T35_USB_HUB_RESET_GPIO); + + return omap_ehci_hcd_stop(); +} +#endif /* CONFIG_USB_EHCI_OMAP */ diff --git a/board/compulab/cm_t3517/mux.c b/board/compulab/cm_t3517/mux.c new file mode 100644 index 0000000000..88ce2cc2e6 --- /dev/null +++ b/board/compulab/cm_t3517/mux.c @@ -0,0 +1,236 @@ +/* + * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Igor Grinberg <grinberg@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mux.h> +#include <asm/io.h> + +void set_muxconf_regs(void) +{ + /* SDRC */ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)); + + /* GPMC */ + MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)); + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)); + + /* SB-T35 Ethernet */ + MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)); + /* DVI enable */ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPIO_54*/ + /* DataImage backlight */ + MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | DIS | M4));/*GPIO_58*/ + + /* SB-T35 SD/MMC WP GPIO59 */ + MUX_VAL(CP(GPMC_CLK), (IEN | PTU | EN | M4)); /*GPIO_59*/ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)); + /* SB-T35 Audio Enable GPIO61 */ + MUX_VAL(CP(GPMC_NBE1), (IDIS | PTU | EN | M4)); /*GPIO_61*/ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)); + /* SB-T35 Ethernet IRQ GPIO65 */ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)); /*GPIO_65*/ + + /* UART3 Console */ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)); + /* RTC V3020 nCS GPIO163 */ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | EN | M4)); /*GPIO_163*/ + /* SB-T35 Ethernet nRESET GPIO164 */ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTU | EN | M4)); /*GPIO_164*/ + + /* SB-T35 SD/MMC CD GPIO144 */ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M4)); /*GPIO_144*/ + /* WIFI nRESET GPIO145 */ + MUX_VAL(CP(UART2_RTS), (IEN | PTD | EN | M4)); /*GPIO_145*/ + /* USB1 PHY Reset GPIO 146 */ + MUX_VAL(CP(UART2_TX), (IEN | PTD | EN | M4)); /*GPIO_146*/ + /* USB2 PHY Reset GPIO 147 */ + MUX_VAL(CP(UART2_RX), (IEN | PTD | EN | M4)); /*GPIO_147*/ + + /* MMC1 */ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)); + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)); + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)); + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)); + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)); + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)); + + /* DSS */ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)); + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)); + + /* I2C */ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)); + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)); + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)); + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)); + + /* SB-T35 USB HUB Reset GPIO98 */ + MUX_VAL(CP(CCDC_WEN), (IDIS | PTU | EN | M4)); /*GPIO_98*/ + /* CM-T3517 USB HUB Reset GPIO152 */ + MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)); /*GPIO_152*/ + + /* RMII */ + MUX_VAL(CP(RMII_MDIO_DATA), (IEN | PTU | EN | M0)); + MUX_VAL(CP(RMII_MDIO_CLK), (M0)); + MUX_VAL(CP(RMII_RXD0), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(RMII_RXD1), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(RMII_RXER), (IEN | PTD | DIS | M0)); + MUX_VAL(CP(RMII_TXD0), (IDIS | M0)); + MUX_VAL(CP(RMII_TXD1), (IDIS | M0)); + MUX_VAL(CP(RMII_TXEN), (IDIS | M0)); + MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTU | DIS | M0)); + + /* Green LED GPIO186 */ + MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | DIS | M4)); /*GPIO_186*/ + + /* SPI */ + MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M1)); /*MCSPI4_CLK*/ + MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M1)); /*MCSPI4_SIMO*/ + MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M1)); /*MCSPI4_SOMI*/ + MUX_VAL(CP(MCBSP1_FSX), (IEN | PTU | EN | M1)); /*MCSPI4_CS0*/ + /* LCD reset GPIO157 */ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | DIS | M4)); /*GPIO_157*/ + + /* RTC V3020 CS Enable GPIO160 */ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTD | EN | M4)); /*GPIO_160*/ + /* SB-T35 LVDS Transmitter SHDN GPIO162 */ + MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTU | DIS | M4)); /*GPIO_162*/ + + /* USB0 - mUSB */ + MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)); + /* USB1 EHCI */ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT0*/ + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT1*/ + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT2*/ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT3*/ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT4*/ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT5*/ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT6*/ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT7*/ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DIR*/ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_NXT*/ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB1_CLK*/ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB1_STP*/ + /* USB2 EHCI */ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT0*/ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT1*/ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M3)); /*HSUSB2_DT2*/ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M3)); /*HSUSB2_DT3*/ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | EN | M3)); /*HSUSB2_DT4*/ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | EN | M3)); /*HSUSB2_DT5*/ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M3)); /*HSUSB2_DT6*/ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | EN | M3)); /*HSUSB2_DT7*/ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DIR*/ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_NXT*/ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB2_CLK*/ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB2_STP*/ + + /* SYS_BOOT */ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTU | DIS | M4)); /*GPIO_2*/ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTU | DIS | M4)); /*GPIO_3*/ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTU | DIS | M4)); /*GPIO_4*/ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTU | DIS | M4)); /*GPIO_5*/ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTU | DIS | M4)); /*GPIO_6*/ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTU | DIS | M4)); /*GPIO_7*/ +} diff --git a/board/compulab/cm_t54/cm_t54.c b/board/compulab/cm_t54/cm_t54.c index 944b7234d6..b1a067d881 100644 --- a/board/compulab/cm_t54/cm_t54.c +++ b/board/compulab/cm_t54/cm_t54.c @@ -100,16 +100,11 @@ uint mmc_get_env_part(struct mmc *mmc) #define SB_T54_CD_GPIO 228 #define SB_T54_WP_GPIO 229 -int board_mmc_getcd(struct mmc *mmc) -{ - return !gpio_get_value(SB_T54_CD_GPIO); -} - int board_mmc_init(bd_t *bis) { int ret0, ret1; - ret0 = omap_mmc_init(0, 0, 0, -1, SB_T54_WP_GPIO); + ret0 = omap_mmc_init(0, 0, 0, SB_T54_CD_GPIO, SB_T54_WP_GPIO); if (ret0) printf("cm_t54: failed to initialize mmc0\n"); diff --git a/board/compulab/common/Makefile b/board/compulab/common/Makefile index 4044ac9d62..dbf0009652 100644 --- a/board/compulab/common/Makefile +++ b/board/compulab/common/Makefile @@ -6,5 +6,8 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_SYS_I2C) += eeprom.o -obj-$(CONFIG_LCD) += omap3_display.o +obj-y += common.o +obj-$(CONFIG_SYS_I2C) += eeprom.o +obj-$(CONFIG_LCD) += omap3_display.o +obj-$(CONFIG_SPLASH_SCREEN) += splash.o +obj-$(CONFIG_SMC911X) += omap3_smc911x.o diff --git a/board/compulab/common/common.c b/board/compulab/common/common.c new file mode 100644 index 0000000000..b25d9a20b4 --- /dev/null +++ b/board/compulab/common/common.c @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Igor Grinberg <grinberg@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/bootm.h> +#include <asm/gpio.h> + +#include "common.h" +#include "eeprom.h" + +void cl_print_pcb_info(void) +{ + u32 board_rev = get_board_rev(); + u32 rev_major = board_rev / 100; + u32 rev_minor = board_rev - (rev_major * 100); + + if ((rev_minor / 10) * 10 == rev_minor) + rev_minor = rev_minor / 10; + + printf("PCB: %u.%u\n", rev_major, rev_minor); +} + +#ifdef CONFIG_SERIAL_TAG +void __weak get_board_serial(struct tag_serialnr *serialnr) +{ + /* + * This corresponds to what happens when we can communicate with the + * eeprom but don't get a valid board serial value. + */ + serialnr->low = 0; + serialnr->high = 0; +}; +#endif + +#ifdef CONFIG_CMD_USB +int cl_usb_hub_init(int gpio, const char *label) +{ + if (gpio_request(gpio, label)) { + printf("Error: can't obtain GPIO%d for %s", gpio, label); + return -1; + } + + gpio_direction_output(gpio, 0); + udelay(10); + gpio_set_value(gpio, 1); + udelay(1000); + return 0; +} + +void cl_usb_hub_deinit(int gpio) +{ + gpio_free(gpio); +} +#endif diff --git a/board/compulab/common/common.h b/board/compulab/common/common.h new file mode 100644 index 0000000000..68ffb111dc --- /dev/null +++ b/board/compulab/common/common.h @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Igor Grinberg <grinberg@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CL_COMMON_ +#define _CL_COMMON_ + +#include <asm/errno.h> + +void cl_print_pcb_info(void); + +#ifdef CONFIG_CMD_USB +int cl_usb_hub_init(int gpio, const char *label); +void cl_usb_hub_deinit(int gpio); +#else /* !CONFIG_CMD_USB */ +static inline int cl_usb_hub_init(int gpio, const char *label) +{ + return -ENOSYS; +} +static inline void cl_usb_hub_deinit(int gpio) {} +#endif /* CONFIG_CMD_USB */ + +#ifdef CONFIG_SPLASH_SCREEN +int cl_splash_screen_prepare(int nand_offset); +#else /* !CONFIG_SPLASH_SCREEN */ +static inline int cl_splash_screen_prepare(int nand_offset) +{ + return -ENOSYS; +} +#endif /* CONFIG_SPLASH_SCREEN */ + +#ifdef CONFIG_SMC911X +int cl_omap3_smc911x_init(int id, int cs, u32 base_addr, + int (*reset)(int), int rst_gpio); +#else /* !CONFIG_SMC911X */ +static inline int cl_omap3_smc911x_init(int id, int cs, u32 base_addr, + int (*reset)(int), int rst_gpio) +{ + return -ENOSYS; +} +#endif /* CONFIG_SMC911X */ + +#endif /* _CL_COMMON_ */ diff --git a/board/compulab/common/eeprom.c b/board/compulab/common/eeprom.c index 2df3adabf8..a45e7be11f 100644 --- a/board/compulab/common/eeprom.c +++ b/board/compulab/common/eeprom.c @@ -109,23 +109,27 @@ int cl_eeprom_read_mac_addr(uchar *buf) return cl_eeprom_read(offset, buf, 6); } +static u32 board_rev; + /* * Routine: cl_eeprom_get_board_rev * Description: read system revision from eeprom */ u32 cl_eeprom_get_board_rev(void) { - u32 rev = 0; char str[5]; /* Legacy representation can contain at most 4 digits */ uint offset = BOARD_REV_OFFSET_LEGACY; + if (board_rev) + return board_rev; + if (cl_eeprom_setup_layout()) return 0; if (cl_eeprom_layout != LAYOUT_LEGACY) offset = BOARD_REV_OFFSET; - if (cl_eeprom_read(offset, (uchar *)&rev, BOARD_REV_SIZE)) + if (cl_eeprom_read(offset, (uchar *)&board_rev, BOARD_REV_SIZE)) return 0; /* @@ -133,9 +137,9 @@ u32 cl_eeprom_get_board_rev(void) * representation. i.e. for rev 1.00: 0x100 --> 0x64 */ if (cl_eeprom_layout == LAYOUT_LEGACY) { - sprintf(str, "%x", rev); - rev = simple_strtoul(str, NULL, 10); + sprintf(str, "%x", board_rev); + board_rev = simple_strtoul(str, NULL, 10); } - return rev; + return board_rev; }; diff --git a/board/compulab/common/omap3_smc911x.c b/board/compulab/common/omap3_smc911x.c new file mode 100644 index 0000000000..4561661987 --- /dev/null +++ b/board/compulab/common/omap3_smc911x.c @@ -0,0 +1,93 @@ +/* + * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Igor Grinberg <grinberg@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <netdev.h> + +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> + +#include "common.h" + +static u32 cl_omap3_smc911x_gpmc_net_config[GPMC_MAX_REG] = { + NET_GPMC_CONFIG1, + NET_GPMC_CONFIG2, + NET_GPMC_CONFIG3, + NET_GPMC_CONFIG4, + NET_GPMC_CONFIG5, + NET_GPMC_CONFIG6, + 0 +}; + +static void cl_omap3_smc911x_setup_net_chip_gmpc(int cs, u32 base_addr) +{ + struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; + + enable_gpmc_cs_config(cl_omap3_smc911x_gpmc_net_config, + &gpmc_cfg->cs[cs], base_addr, GPMC_SIZE_16M); + + /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ + writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); + + /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ + writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); + + /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ + writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, + &ctrl_base->gpmc_nadv_ale); +} + +#ifdef CONFIG_OMAP_GPIO +static int cl_omap3_smc911x_reset_net_chip(int gpio) +{ + int err; + + if (!gpio_is_valid(gpio)) + return -EINVAL; + + err = gpio_request(gpio, "eth rst"); + if (err) + return err; + + /* Set gpio as output and send a pulse */ + gpio_direction_output(gpio, 1); + udelay(1); + gpio_set_value(gpio, 0); + mdelay(40); + gpio_set_value(gpio, 1); + mdelay(1); + + return 0; +} +#else /* !CONFIG_OMAP_GPIO */ +static inline int cl_omap3_smc911x_reset_net_chip(int gpio) { return 0; } +#endif /* CONFIG_OMAP_GPIO */ + +int cl_omap3_smc911x_init(int id, int cs, u32 base_addr, + int (*reset)(int), int rst_gpio) +{ + int ret; + + cl_omap3_smc911x_setup_net_chip_gmpc(cs, base_addr); + + if (reset) + reset(rst_gpio); + else + cl_omap3_smc911x_reset_net_chip(rst_gpio); + + ret = smc911x_initialize(id, base_addr); + if (ret > 0) + return ret; + + printf("Failed initializing SMC911x! "); + return 0; +} diff --git a/board/compulab/common/splash.c b/board/compulab/common/splash.c new file mode 100644 index 0000000000..49ed49b81e --- /dev/null +++ b/board/compulab/common/splash.c @@ -0,0 +1,72 @@ +/* + * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Igor Grinberg <grinberg@compulab.co.il> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <nand.h> +#include <bmp_layout.h> + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_CMD_NAND +static int splash_load_from_nand(u32 bmp_load_addr, int nand_offset) +{ + struct bmp_header *bmp_hdr; + int res; + size_t bmp_size, bmp_header_size = sizeof(struct bmp_header); + + if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp) + goto splash_address_too_high; + + res = nand_read_skip_bad(&nand_info[nand_curr_device], + nand_offset, &bmp_header_size, + NULL, nand_info[nand_curr_device].size, + (u_char *)bmp_load_addr); + if (res < 0) + return res; + + bmp_hdr = (struct bmp_header *)bmp_load_addr; + bmp_size = le32_to_cpu(bmp_hdr->file_size); + + if (bmp_load_addr + bmp_size >= gd->start_addr_sp) + goto splash_address_too_high; + + return nand_read_skip_bad(&nand_info[nand_curr_device], + nand_offset, &bmp_size, + NULL, nand_info[nand_curr_device].size, + (u_char *)bmp_load_addr); + +splash_address_too_high: + printf("Error: splashimage address too high. Data overwrites U-Boot " + "and/or placed beyond DRAM boundaries.\n"); + + return -1; +} +#else +static inline int splash_load_from_nand(u32 bmp_load_addr, int nand_offset) +{ + return -1; +} +#endif /* CONFIG_CMD_NAND */ + +int cl_splash_screen_prepare(int nand_offset) +{ + char *env_splashimage_value; + u32 bmp_load_addr; + + env_splashimage_value = getenv("splashimage"); + if (env_splashimage_value == NULL) + return -1; + + bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16); + if (bmp_load_addr == 0) { + printf("Error: bad splashimage address specified\n"); + return -1; + } + + return splash_load_from_nand(bmp_load_addr, nand_offset); +} diff --git a/board/dbau1x00/Kconfig b/board/dbau1x00/Kconfig index 1a8946d06c..1286e4509f 100644 --- a/board/dbau1x00/Kconfig +++ b/board/dbau1x00/Kconfig @@ -1,8 +1,5 @@ if TARGET_DBAU1X00 -config SYS_CPU - default "mips32" - config SYS_BOARD default "dbau1x00" @@ -12,4 +9,22 @@ config SYS_SOC config SYS_CONFIG_NAME default "dbau1x00" +menu "dbau1x00 board options" + +choice + prompt "Select au1x00 SoC type" + +config DBAU1100 + bool "Select AU1100" + +config DBAU1500 + bool "Select AU1500" + +config DBAU1550 + bool "Select AU1550" + +endchoice + +endmenu + endif diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c index 85c3567b0b..b1680741e1 100644 --- a/board/esd/common/auto_update.c +++ b/board/esd/common/auto_update.c @@ -377,7 +377,7 @@ int do_auto_update(void) { block_dev_desc_t *stor_dev = NULL; long sz; - int i, res, cnt, old_ctrlc; + int i, res, old_ctrlc; char buffer[32]; char str[80]; int n; @@ -455,7 +455,6 @@ int do_auto_update(void) clear_ctrlc (); break; } - cnt++; } while (res < 0); } diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c index 55c20d02d3..29c688a787 100644 --- a/board/esd/pci405/cmd_pci405.c +++ b/board/esd/pci405/cmd_pci405.c @@ -23,7 +23,7 @@ */ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - unsigned int *ptr = 0; + unsigned int *ptr; int count = 0; int count2 = 0; int i; @@ -35,12 +35,14 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * Mark sync address */ ptr = 0; + /* cppcheck-suppress nullPointer */ *ptr = 0xffffffff; puts("\nWaiting for image from pci host -"); /* * Wait for host to write the start address */ + /* cppcheck-suppress nullPointer */ while (*ptr == 0xffffffff) { count++; if (!(count % 100)) { diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index 0dc0160e19..42ae6fac5e 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -27,6 +27,7 @@ #include <asm/arch/mxc_hdmi.h> #include <asm/imx-common/video.h> #include <asm/arch/crm_regs.h> +#include <pca953x.h> DECLARE_GLOBAL_DATA_PTR; @@ -116,6 +117,44 @@ static iomux_v3_cfg_t const port_exp[] = { MX6_PAD_SD2_DAT0__GPIO1_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL), }; +/*Define for building port exp gpio, pin starts from 0*/ +#define PORTEXP_IO_NR(chip, pin) \ + ((chip << 5) + pin) + +/*Get the chip addr from a ioexp gpio*/ +#define PORTEXP_IO_TO_CHIP(gpio_nr) \ + (gpio_nr >> 5) + +/*Get the pin number from a ioexp gpio*/ +#define PORTEXP_IO_TO_PIN(gpio_nr) \ + (gpio_nr & 0x1f) + +static int port_exp_direction_output(unsigned gpio, int value) +{ + int ret; + + i2c_set_bus_num(2); + ret = i2c_probe(PORTEXP_IO_TO_CHIP(gpio)); + if (ret) + return ret; + + ret = pca953x_set_dir(PORTEXP_IO_TO_CHIP(gpio), + (1 << PORTEXP_IO_TO_PIN(gpio)), + (PCA953X_DIR_OUT << PORTEXP_IO_TO_PIN(gpio))); + + if (ret) + return ret; + + ret = pca953x_set_val(PORTEXP_IO_TO_CHIP(gpio), + (1 << PORTEXP_IO_TO_PIN(gpio)), + (value << PORTEXP_IO_TO_PIN(gpio))); + + if (ret) + return ret; + + return 0; +} + static void setup_iomux_enet(void) { imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); @@ -361,3 +400,57 @@ int checkboard(void) return 0; } + +#ifdef CONFIG_USB_EHCI_MX6 +#define USB_HOST1_PWR PORTEXP_IO_NR(0x32, 7) +#define USB_OTG_PWR PORTEXP_IO_NR(0x34, 1) + +iomux_v3_cfg_t const usb_otg_pads[] = { + MX6_PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +int board_ehci_hcd_init(int port) +{ + switch (port) { + case 0: + imx_iomux_v3_setup_multiple_pads(usb_otg_pads, + ARRAY_SIZE(usb_otg_pads)); + + /* + * Set daisy chain for otg_pin_id on 6q. + * For 6dl, this bit is reserved. + */ + imx_iomux_set_gpr_register(1, 13, 1, 0); + break; + case 1: + break; + default: + printf("MXC USB port %d not yet supported\n", port); + return -EINVAL; + } + return 0; +} + +int board_ehci_power(int port, int on) +{ + switch (port) { + case 0: + if (on) + port_exp_direction_output(USB_OTG_PWR, 1); + else + port_exp_direction_output(USB_OTG_PWR, 0); + break; + case 1: + if (on) + port_exp_direction_output(USB_HOST1_PWR, 1); + else + port_exp_direction_output(USB_HOST1_PWR, 0); + break; + default: + printf("MXC USB port %d not yet supported\n", port); + return -EINVAL; + } + + return 0; +} +#endif diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 81dcd6e5dd..3d81fffea5 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -51,6 +51,8 @@ DECLARE_GLOBAL_DATA_PTR; #define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL) +#define DISP0_PWR_EN IMX_GPIO_NR(1, 21) + int dram_init(void) { gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); @@ -141,6 +143,45 @@ iomux_v3_cfg_t const ecspi1_pads[] = { MX6_PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL), }; +static iomux_v3_cfg_t const rgb_pads[] = { + MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DI0_PIN4__IPU1_DI0_PIN04 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD1_DAT3__GPIO1_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void enable_rgb(struct display_info_t const *dev) +{ + imx_iomux_v3_setup_multiple_pads(rgb_pads, ARRAY_SIZE(rgb_pads)); + gpio_direction_output(DISP0_PWR_EN, 1); +} + static struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | I2C_PAD, @@ -357,6 +398,26 @@ struct display_info_t const displays[] = {{ .vsync_len = 10, .sync = FB_SYNC_EXT, .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = NULL, + .enable = enable_rgb, + .mode = { + .name = "SEIKO-WVGA", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 29850, + .left_margin = 89, + .right_margin = 164, + .upper_margin = 23, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED } } }; size_t display_count = ARRAY_SIZE(displays); diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index a500133efa..e76c343812 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -52,6 +52,23 @@ static iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; +static iomux_v3_cfg_t const usdhc1_pads[] = { + /* 8 bit SD */ + MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT0__USDHC1_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT1__USDHC1_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT2__USDHC1_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT3__USDHC1_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT4__USDHC1_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT5__USDHC1_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT6__USDHC1_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD1_DAT7__USDHC1_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + + /*CD pin*/ + MX6_PAD_KEY_ROW7__GPIO_4_7 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + static iomux_v3_cfg_t const usdhc2_pads[] = { MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -59,6 +76,21 @@ static iomux_v3_cfg_t const usdhc2_pads[] = { MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + + /*CD pin*/ + MX6_PAD_SD2_DAT7__GPIO_5_0 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc3_pads[] = { + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + + /*CD pin*/ + MX6_PAD_REF_CLK_32K__GPIO_3_22 | MUX_PAD_CTRL(NO_PAD_CTRL), }; static iomux_v3_cfg_t const fec_pads[] = { @@ -109,21 +141,82 @@ static void setup_iomux_fec(void) gpio_set_value(ETH_PHY_RESET, 1); } -static struct fsl_esdhc_cfg usdhc_cfg[1] = { - {USDHC2_BASE_ADDR}, +#define USDHC1_CD_GPIO IMX_GPIO_NR(4, 7) +#define USDHC2_CD_GPIO IMX_GPIO_NR(5, 0) +#define USDHC3_CD_GPIO IMX_GPIO_NR(3, 22) + +static struct fsl_esdhc_cfg usdhc_cfg[3] = { + {USDHC1_BASE_ADDR}, + {USDHC2_BASE_ADDR, 0, 4}, + {USDHC3_BASE_ADDR, 0, 4}, }; int board_mmc_getcd(struct mmc *mmc) { - return 1; /* Assume boot SD always present */ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC1_BASE_ADDR: + ret = !gpio_get_value(USDHC1_CD_GPIO); + break; + case USDHC2_BASE_ADDR: + ret = !gpio_get_value(USDHC2_CD_GPIO); + break; + case USDHC3_BASE_ADDR: + ret = !gpio_get_value(USDHC3_CD_GPIO); + break; + } + + return ret; } int board_mmc_init(bd_t *bis) { - imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); + int i, ret; + + /* + * According to the board_mmc_init() the following map is done: + * (U-boot device node) (Physical Port) + * mmc0 USDHC1 + * mmc1 USDHC2 + * mmc2 USDHC3 + */ + for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { + switch (i) { + case 0: + imx_iomux_v3_setup_multiple_pads( + usdhc1_pads, ARRAY_SIZE(usdhc1_pads)); + gpio_direction_input(USDHC1_CD_GPIO); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); + break; + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); + gpio_direction_input(USDHC2_CD_GPIO); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + break; + case 2: + imx_iomux_v3_setup_multiple_pads( + usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + gpio_direction_input(USDHC3_CD_GPIO); + usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + break; + default: + printf("Warning: you configured more USDHC controllers" + "(%d) than supported by the board\n", i + 1); + return -EINVAL; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); + if (ret) { + printf("Warning: failed to initialize " + "mmc dev %d\n", i); + return ret; + } + } - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); + return 0; } #ifdef CONFIG_FEC_MXC diff --git a/board/gaisler/gr_cpci_ax2000/Kconfig b/board/gaisler/gr_cpci_ax2000/Kconfig index 8da050404c..c12a002179 100644 --- a/board/gaisler/gr_cpci_ax2000/Kconfig +++ b/board/gaisler/gr_cpci_ax2000/Kconfig @@ -1,14 +1,8 @@ if TARGET_GR_CPCI_AX2000 -config SYS_CPU - default "leon3" - config SYS_BOARD default "gr_cpci_ax2000" -config SYS_VENDOR - default "gaisler" - config SYS_CONFIG_NAME default "gr_cpci_ax2000" diff --git a/board/gaisler/gr_cpci_ax2000/config.mk b/board/gaisler/gr_cpci_ax2000/config.mk deleted file mode 100644 index 731a53905f..0000000000 --- a/board/gaisler/gr_cpci_ax2000/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# (C) Copyright 2008 -# Daniel Hellstrom, Gaisler Research, daniel@gaisler.com. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# GR-CPCI-AX2000 board -# - -# U-BOOT IN FLASH -CONFIG_SYS_TEXT_BASE = 0x00000000 - -# U-BOOT IN RAM or SDRAM with -nosram flag set when starting GRMON -#CONFIG_SYS_TEXT_BASE = 0x40000000 - -# U-BOOT IN SDRAM -#CONFIG_SYS_TEXT_BASE = 0x60000000 diff --git a/board/gaisler/gr_ep2s60/Kconfig b/board/gaisler/gr_ep2s60/Kconfig index 00b2097cf4..f49937c55a 100644 --- a/board/gaisler/gr_ep2s60/Kconfig +++ b/board/gaisler/gr_ep2s60/Kconfig @@ -1,14 +1,8 @@ if TARGET_GR_EP2S60 -config SYS_CPU - default "leon3" - config SYS_BOARD default "gr_ep2s60" -config SYS_VENDOR - default "gaisler" - config SYS_CONFIG_NAME default "gr_ep2s60" diff --git a/board/gaisler/gr_ep2s60/config.mk b/board/gaisler/gr_ep2s60/config.mk deleted file mode 100644 index 6e01f07c0c..0000000000 --- a/board/gaisler/gr_ep2s60/config.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# (C) Copyright 2008 -# Daniel Hellstrom, Gaisler Research, daniel@gaisler.com. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# Altera NIOS delopment board Stratix II edition, FPGA device EP2S60, -# with GRLIB Template design (GPL Open Source SPARC/LEON3) -# - -# U-BOOT IN FLASH -CONFIG_SYS_TEXT_BASE = 0x00000000 - -# U-BOOT IN SDRAM -#CONFIG_SYS_TEXT_BASE = 0x40000000 diff --git a/board/gaisler/gr_xc3s_1500/Kconfig b/board/gaisler/gr_xc3s_1500/Kconfig index 765e028b51..e695ba2cdd 100644 --- a/board/gaisler/gr_xc3s_1500/Kconfig +++ b/board/gaisler/gr_xc3s_1500/Kconfig @@ -1,14 +1,8 @@ if TARGET_GR_XC3S_1500 -config SYS_CPU - default "leon3" - config SYS_BOARD default "gr_xc3s_1500" -config SYS_VENDOR - default "gaisler" - config SYS_CONFIG_NAME default "gr_xc3s_1500" diff --git a/board/gaisler/gr_xc3s_1500/config.mk b/board/gaisler/gr_xc3s_1500/config.mk deleted file mode 100644 index e4a66cbcf1..0000000000 --- a/board/gaisler/gr_xc3s_1500/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2007 -# Daniel Hellstrom, Gaisler Research, daniel@gaisler.com. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# GR-XC3S-1500 board -# - -# U-BOOT IN FLASH -CONFIG_SYS_TEXT_BASE = 0x00000000 - -# U-BOOT IN RAM -#CONFIG_SYS_TEXT_BASE = 0x40000000 diff --git a/board/gaisler/grsim/Kconfig b/board/gaisler/grsim/Kconfig index 751fa03be4..18598d3c2a 100644 --- a/board/gaisler/grsim/Kconfig +++ b/board/gaisler/grsim/Kconfig @@ -1,14 +1,8 @@ if TARGET_GRSIM -config SYS_CPU - default "leon3" - config SYS_BOARD default "grsim" -config SYS_VENDOR - default "gaisler" - config SYS_CONFIG_NAME default "grsim" diff --git a/board/gaisler/grsim/config.mk b/board/gaisler/grsim/config.mk deleted file mode 100644 index d1f61dac76..0000000000 --- a/board/gaisler/grsim/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2007 -# Daniel Hellstrom, Gaisler Research, daniel@gaisler.com -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# GRSIM simulating a LEON3 GR-XC3S-1500 board -# - -# U-BOOT IN FLASH -CONFIG_SYS_TEXT_BASE = 0x00000000 - -# U-BOOT IN RAM -#CONFIG_SYS_TEXT_BASE = 0x40000000 diff --git a/board/gaisler/grsim_leon2/Kconfig b/board/gaisler/grsim_leon2/Kconfig index 0907f3af89..0d21a0a985 100644 --- a/board/gaisler/grsim_leon2/Kconfig +++ b/board/gaisler/grsim_leon2/Kconfig @@ -1,14 +1,8 @@ if TARGET_GRSIM_LEON2 -config SYS_CPU - default "leon2" - config SYS_BOARD default "grsim_leon2" -config SYS_VENDOR - default "gaisler" - config SYS_CONFIG_NAME default "grsim_leon2" diff --git a/board/gaisler/grsim_leon2/config.mk b/board/gaisler/grsim_leon2/config.mk deleted file mode 100644 index f98b23b800..0000000000 --- a/board/gaisler/grsim_leon2/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2007 -# Daniel Hellstrom, Gaisler Research, daniel@gaisler.com -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# GRSIM simulating a LEON2 board -# - -# RUN U-BOOT FROM PROM -CONFIG_SYS_TEXT_BASE = 0x00000000 - -# RUN U-BOOT FROM RAM -#CONFIG_SYS_TEXT_BASE = 0x40000000 diff --git a/board/imgtec/malta/Kconfig b/board/imgtec/malta/Kconfig index 401962c4bd..4c06d0c0d8 100644 --- a/board/imgtec/malta/Kconfig +++ b/board/imgtec/malta/Kconfig @@ -1,8 +1,5 @@ if TARGET_MALTA -config SYS_CPU - default "mips32" - config SYS_BOARD default "malta" diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index 2ddb3da38f..b9aff1a84d 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -360,6 +360,7 @@ static int do_checktestboot(cmd_tbl_t *cmdtp, int flag, int argc, testboot = (testpin != 0) && (s); if (verbose) { printf("testpin = %d\n", testpin); + /* cppcheck-suppress nullPointer */ printf("test_bank = %s\n", s ? s : "not set"); printf("boot test app : %s\n", (testboot) ? "yes" : "no"); } diff --git a/board/kosagi/novena/Kconfig b/board/kosagi/novena/Kconfig new file mode 100644 index 0000000000..4ba63999ae --- /dev/null +++ b/board/kosagi/novena/Kconfig @@ -0,0 +1,18 @@ +if TARGET_KOSAGI_NOVENA + +config SYS_CPU + default "armv7" + +config SYS_BOARD + default "novena" + +config SYS_VENDOR + default "kosagi" + +config SYS_SOC + default "mx6" + +config SYS_CONFIG_NAME + default "novena" + +endif diff --git a/board/kosagi/novena/MAINTAINERS b/board/kosagi/novena/MAINTAINERS new file mode 100644 index 0000000000..d3471c2d65 --- /dev/null +++ b/board/kosagi/novena/MAINTAINERS @@ -0,0 +1,6 @@ +NOVENA BOARD +M: Marek Vasut <marex@denx.de> +S: Maintained +F: board/kosagi/novena/ +F: include/configs/novena.h +F: configs/novena_defconfig diff --git a/board/kosagi/novena/Makefile b/board/kosagi/novena/Makefile new file mode 100644 index 0000000000..6fba17718b --- /dev/null +++ b/board/kosagi/novena/Makefile @@ -0,0 +1,11 @@ +# +# Copyright (C) 2014 Marek Vasut <marex@denx.de> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-y := novena_spl.o +else +obj-y := novena.o +endif diff --git a/board/kosagi/novena/novena.c b/board/kosagi/novena/novena.c new file mode 100644 index 0000000000..6add9e5265 --- /dev/null +++ b/board/kosagi/novena/novena.c @@ -0,0 +1,340 @@ +/* + * Novena board support + * + * Copyright (C) 2014 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/mxc_hdmi.h> +#include <asm/arch/sys_proto.h> +#include <asm/imx-common/boot_mode.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/mxc_i2c.h> +#include <asm/imx-common/sata.h> +#include <asm/imx-common/video.h> +#include <fsl_esdhc.h> +#include <i2c.h> +#include <input.h> +#include <ipu_pixfmt.h> +#include <linux/fb.h> +#include <linux/input.h> +#include <malloc.h> +#include <micrel.h> +#include <miiphy.h> +#include <mmc.h> +#include <netdev.h> +#include <power/pmic.h> +#include <power/pfuze100_pmic.h> +#include <stdio_dev.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define NOVENA_BUTTON_GPIO IMX_GPIO_NR(4, 14) +#define NOVENA_SD_WP IMX_GPIO_NR(1, 2) +#define NOVENA_SD_CD IMX_GPIO_NR(1, 4) + +/* + * GPIO button + */ +#ifdef CONFIG_KEYBOARD +static struct input_config button_input; + +static int novena_gpio_button_read_keys(struct input_config *input) +{ + int key = KEY_ENTER; + if (gpio_get_value(NOVENA_BUTTON_GPIO)) + return 0; + input_send_keycodes(&button_input, &key, 1); + return 1; +} + +static int novena_gpio_button_getc(struct stdio_dev *dev) +{ + return input_getc(&button_input); +} + +static int novena_gpio_button_tstc(struct stdio_dev *dev) +{ + return input_tstc(&button_input); +} + +static int novena_gpio_button_init(struct stdio_dev *dev) +{ + gpio_direction_input(NOVENA_BUTTON_GPIO); + input_set_delays(&button_input, 250, 250); + return 0; +} + +int drv_keyboard_init(void) +{ + int error; + struct stdio_dev dev = { + .name = "button", + .flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM, + .start = novena_gpio_button_init, + .getc = novena_gpio_button_getc, + .tstc = novena_gpio_button_tstc, + }; + + error = input_init(&button_input, 0); + if (error) { + debug("%s: Cannot set up input\n", __func__); + return -1; + } + button_input.read_keys = novena_gpio_button_read_keys; + + error = input_stdio_register(&dev); + if (error) + return error; + + return 0; +} +#endif + +/* + * SDHC + */ +#ifdef CONFIG_FSL_ESDHC +static struct fsl_esdhc_cfg usdhc_cfg[] = { + { USDHC3_BASE_ADDR, 0, 4 }, /* Micro SD */ + { USDHC2_BASE_ADDR, 0, 4 }, /* Big SD */ +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + + /* There is no CD for a microSD card, assume always present. */ + if (cfg->esdhc_base == USDHC3_BASE_ADDR) + return 1; + else + return !gpio_get_value(NOVENA_SD_CD); +} + +int board_mmc_getwp(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + + /* There is no WP for a microSD card, assume always read-write. */ + if (cfg->esdhc_base == USDHC3_BASE_ADDR) + return 0; + else + return gpio_get_value(NOVENA_SD_WP); +} + + +int board_mmc_init(bd_t *bis) +{ + s32 status = 0; + int index; + + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + + /* Big SD write-protect and card-detect */ + gpio_direction_input(NOVENA_SD_WP); + gpio_direction_input(NOVENA_SD_CD); + + for (index = 0; index < ARRAY_SIZE(usdhc_cfg); index++) { + status = fsl_esdhc_initialize(bis, &usdhc_cfg[index]); + if (status) + return status; + } + + return status; +} +#endif + +/* + * Video over HDMI + */ +#if defined(CONFIG_VIDEO_IPUV3) +static void enable_hdmi(struct display_info_t const *dev) +{ + imx_enable_hdmi_phy(); +} + +struct display_info_t const displays[] = { + { + /* HDMI Output */ + .bus = -1, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = detect_hdmi, + .enable = enable_hdmi, + .mode = { + .name = "HDMI", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED + } + } +}; + +size_t display_count = ARRAY_SIZE(displays); + +static void setup_display(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + + enable_ipu_clock(); + imx_setup_hdmi(); + + /* Turn on LDB0,IPU,IPU DI0 clocks */ + setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK); + + /* set LDB0, LDB1 clk select to 011/011 */ + clrsetbits_le32(&mxc_ccm->cs2cdr, + MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK | + MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK, + (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) | + (3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET)); + + setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV); + + setbits_le32(&mxc_ccm->chsccdr, CHSCCDR_CLK_SEL_LDB_DI0 << + MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET); + + writel(IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES | + IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH | + IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW | + IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG | + IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT | + IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG | + IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT | + IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED | + IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0, + &iomux->gpr[2]); + + clrsetbits_le32(&iomux->gpr[3], IOMUXC_GPR3_LVDS0_MUX_CTL_MASK, + IOMUXC_GPR3_MUX_SRC_IPU1_DI0 << + IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET); +} +#endif + +int board_early_init_f(void) +{ +#if defined(CONFIG_VIDEO_IPUV3) + setup_display(); +#endif + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + +#ifdef CONFIG_CMD_SATA + setup_sata(); +#endif + + return 0; +} + +int checkboard(void) +{ + puts("Board: Novena 4x\n"); + return 0; +} + +int dram_init(void) +{ + gd->ram_size = imx_ddr_size(); + return 0; +} + +/* setup board specific PMIC */ +int power_init_board(void) +{ + struct pmic *p; + u32 reg; + int ret; + + power_pfuze100_init(1); + p = pmic_get("PFUZE100"); + if (!p) + return -EINVAL; + + ret = pmic_probe(p); + if (ret) + return ret; + + pmic_reg_read(p, PFUZE100_DEVICEID, ®); + printf("PMIC: PFUZE100 ID=0x%02x\n", reg); + + /* Set SWBST to 5.0V and enable (for USB) */ + pmic_reg_read(p, PFUZE100_SWBSTCON1, ®); + reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK); + reg |= (SWBST_5_00V | SWBST_MODE_AUTO); + pmic_reg_write(p, PFUZE100_SWBSTCON1, reg); + + return 0; +} + +/* EEPROM configuration data */ +struct novena_eeprom_data { + uint8_t signature[6]; + uint8_t version; + uint8_t reserved; + uint32_t serial; + uint8_t mac[6]; + uint16_t features; +}; + +int misc_init_r(void) +{ + struct novena_eeprom_data data; + uchar *datap = (uchar *)&data; + const char *signature = "Novena"; + int ret; + + /* If 'ethaddr' is already set, do nothing. */ + if (getenv("ethaddr")) + return 0; + + /* EEPROM is at bus 2. */ + ret = i2c_set_bus_num(2); + if (ret) { + puts("Cannot select EEPROM I2C bus.\n"); + return 0; + } + + /* EEPROM is at address 0x56. */ + ret = eeprom_read(0x56, 0, datap, sizeof(data)); + if (ret) { + puts("Cannot read I2C EEPROM.\n"); + return 0; + } + + /* Check EEPROM signature. */ + if (memcmp(data.signature, signature, 6)) { + puts("Invalid I2C EEPROM signature.\n"); + return 0; + } + + /* Set ethernet address from EEPROM. */ + eth_setenv_enetaddr("ethaddr", data.mac); + + return ret; +} diff --git a/board/kosagi/novena/novena_spl.c b/board/kosagi/novena/novena_spl.c new file mode 100644 index 0000000000..c4155ddee2 --- /dev/null +++ b/board/kosagi/novena/novena_spl.c @@ -0,0 +1,584 @@ +/* + * Novena SPL + * + * Copyright (C) 2014 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/iomux.h> +#include <asm/arch/mx6-ddr.h> +#include <asm/arch/mx6-pins.h> +#include <asm/arch/sys_proto.h> +#include <asm/gpio.h> +#include <asm/imx-common/boot_mode.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/mxc_i2c.h> +#include <i2c.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <spl.h> + +#include <asm/arch/mx6-ddr.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL \ + (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL \ + (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define ENET_PAD_CTRL \ + (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +#define ENET_PHY_CFG_PAD_CTRL \ + (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_22K_UP | PAD_CTL_HYS) + +#define RGMII_PAD_CTRL \ + (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +#define SPI_PAD_CTRL \ + (PAD_CTL_HYS | \ + PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) + +#define I2C_PAD_CTRL \ + (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_240ohm | PAD_CTL_HYS | \ + PAD_CTL_ODE) + +#define BUTTON_PAD_CTRL \ + (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) + +#define NOVENA_AUDIO_PWRON IMX_GPIO_NR(5, 17) +#define NOVENA_FPGA_RESET_N_GPIO IMX_GPIO_NR(5, 7) +#define NOVENA_HDMI_GHOST_HPD IMX_GPIO_NR(5, 4) +#define NOVENA_PCIE_RESET_GPIO IMX_GPIO_NR(3, 29) +#define NOVENA_PCIE_POWER_ON_GPIO IMX_GPIO_NR(7, 12) +#define NOVENA_PCIE_WAKE_UP_GPIO IMX_GPIO_NR(3, 22) +#define NOVENA_PCIE_DISABLE_GPIO IMX_GPIO_NR(2, 16) + +/* + * Audio + */ +static iomux_v3_cfg_t audio_pads[] = { + /* AUD_PWRON */ + MX6_PAD_DISP0_DAT23__GPIO5_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void novena_spl_setup_iomux_audio(void) +{ + imx_iomux_v3_setup_multiple_pads(audio_pads, ARRAY_SIZE(audio_pads)); + gpio_direction_output(NOVENA_AUDIO_PWRON, 1); +} + +/* + * ENET + */ +static iomux_v3_cfg_t enet_pads1[] = { + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(RGMII_PAD_CTRL), + MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(RGMII_PAD_CTRL), + MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(RGMII_PAD_CTRL), + MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(RGMII_PAD_CTRL), + MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(RGMII_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(RGMII_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + + /* pin 35, PHY_AD2 */ + MX6_PAD_RGMII_RXC__GPIO6_IO30 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), + /* pin 32, MODE0 */ + MX6_PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), + /* pin 31, MODE1 */ + MX6_PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), + /* pin 28, MODE2 */ + MX6_PAD_RGMII_RD2__GPIO6_IO28 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), + /* pin 27, MODE3 */ + MX6_PAD_RGMII_RD3__GPIO6_IO29 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), + /* pin 33, CLK125_EN */ + MX6_PAD_RGMII_RX_CTL__GPIO6_IO24 | MUX_PAD_CTRL(ENET_PHY_CFG_PAD_CTRL), + + /* pin 42 PHY nRST */ + MX6_PAD_EIM_D23__GPIO3_IO23 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t enet_pads2[] = { + MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(RGMII_PAD_CTRL), + MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(RGMII_PAD_CTRL), + MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(RGMII_PAD_CTRL), + MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(RGMII_PAD_CTRL), + MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(RGMII_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(RGMII_PAD_CTRL), +}; + +static void novena_spl_setup_iomux_enet(void) +{ + imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1)); + + /* Assert Ethernet PHY nRST */ + gpio_direction_output(IMX_GPIO_NR(3, 23), 0); + + /* + * Use imx6 internal pull-ups to drive PHY mode pins during PHY reset + * de-assertion. The intention is to use weak signal drivers (pull-ups) + * to prevent the conflict between PHY pins becoming outputs after + * reset and imx6 still driving the pins. The issue is described in PHY + * datasheet, p.14 + */ + gpio_direction_input(IMX_GPIO_NR(6, 30)); /* PHY_AD2 = 1 */ + gpio_direction_input(IMX_GPIO_NR(6, 25)); /* MODE0 = 1 */ + gpio_direction_input(IMX_GPIO_NR(6, 27)); /* MODE1 = 1 */ + gpio_direction_input(IMX_GPIO_NR(6, 28)); /* MODE2 = 1 */ + gpio_direction_input(IMX_GPIO_NR(6, 29)); /* MODE3 = 1 */ + gpio_direction_input(IMX_GPIO_NR(6, 24)); /* CLK125_EN = 1 */ + + /* Following reset timing (p.53, fig.8 from the PHY datasheet) */ + mdelay(10); + + /* De-assert Ethernet PHY nRST */ + gpio_set_value(IMX_GPIO_NR(3, 23), 1); + + /* PHY is now configured, connect FEC to the pads */ + imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); + + /* + * PHY datasheet recommends on p.53 to wait at least 100us after reset + * before using MII, so we enforce the delay here + */ + udelay(100); +} + +/* + * FPGA + */ +static iomux_v3_cfg_t fpga_pads[] = { + /* FPGA_RESET_N */ + MX6_PAD_DISP0_DAT13__GPIO5_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void novena_spl_setup_iomux_fpga(void) +{ + imx_iomux_v3_setup_multiple_pads(fpga_pads, ARRAY_SIZE(fpga_pads)); + gpio_direction_output(NOVENA_FPGA_RESET_N_GPIO, 0); +} + +/* + * GPIO Button + */ +static iomux_v3_cfg_t button_pads[] = { + /* Debug */ + MX6_PAD_KEY_COL4__GPIO4_IO14 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), +}; + +static void novena_spl_setup_iomux_buttons(void) +{ + imx_iomux_v3_setup_multiple_pads(button_pads, ARRAY_SIZE(button_pads)); +} + +/* + * I2C + */ +/* + * I2C1: + * 0x1d ... MMA7455L + * 0x30 ... SO-DIMM temp sensor + * 0x44 ... STMPE610 + * 0x50 ... SO-DIMM ID + */ +struct i2c_pads_info i2c_pad_info0 = { + .scl = { + .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC, + .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC, + .gp = IMX_GPIO_NR(3, 21) + }, + .sda = { + .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC, + .gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC, + .gp = IMX_GPIO_NR(3, 28) + } +}; + +/* + * I2C2: + * 0x08 ... PMIC + * 0x3a ... HDMI DCC + * 0x50 ... HDMI DCC + */ +static struct i2c_pads_info i2c_pad_info1 = { + .scl = { + .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC, + .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC, + .gp = IMX_GPIO_NR(2, 30) + }, + .sda = { + .i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC, + .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC, + .gp = IMX_GPIO_NR(3, 16) + } +}; + +/* + * I2C3: + * 0x11 ... ES8283 + * 0x50 ... LCD EDID + * 0x56 ... EEPROM + */ +static struct i2c_pads_info i2c_pad_info2 = { + .scl = { + .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC, + .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC, + .gp = IMX_GPIO_NR(3, 17) + }, + .sda = { + .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC, + .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC, + .gp = IMX_GPIO_NR(3, 18) + } +}; + +static void novena_spl_setup_iomux_i2c(void) +{ + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); +} + +/* + * PCI express + */ +#ifdef CONFIG_CMD_PCI +static iomux_v3_cfg_t pcie_pads[] = { + /* "Reset" pin */ + MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* "Power on" pin */ + MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* "Wake up" pin (input) */ + MX6_PAD_EIM_D22__GPIO3_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* "Disable endpoint" (rfkill) pin */ + MX6_PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void novena_spl_setup_iomux_pcie(void) +{ + imx_iomux_v3_setup_multiple_pads(pcie_pads, ARRAY_SIZE(pcie_pads)); + + /* Ensure PCIe is powered down */ + gpio_direction_output(NOVENA_PCIE_POWER_ON_GPIO, 0); + + /* Put the card into reset */ + gpio_direction_output(NOVENA_PCIE_RESET_GPIO, 0); + + /* Input signal to wake system from mPCIe card */ + gpio_direction_input(NOVENA_PCIE_WAKE_UP_GPIO); + + /* Drive RFKILL high, to ensure the radio is turned on */ + gpio_direction_output(NOVENA_PCIE_DISABLE_GPIO, 1); +} +#else +static inline void novena_spl_setup_iomux_pcie(void) {} +#endif + +/* + * SDHC + */ +static iomux_v3_cfg_t usdhc2_pads[] = { + MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */ + MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ +}; + +static iomux_v3_cfg_t usdhc3_pads[] = { + MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +static void novena_spl_setup_iomux_sdhc(void) +{ + imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); + imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + + /* Big SD write-protect and card-detect */ + gpio_direction_input(IMX_GPIO_NR(1, 2)); + gpio_direction_input(IMX_GPIO_NR(1, 4)); +} + +/* + * SPI + */ +#ifdef CONFIG_MXC_SPI +static iomux_v3_cfg_t ecspi3_pads[] = { + /* SS1 */ + MX6_PAD_DISP0_DAT1__ECSPI3_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_DISP0_DAT2__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_DISP0_DAT0__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_DISP0_DAT3__GPIO4_IO24 | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_DISP0_DAT4__GPIO4_IO25 | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_DISP0_DAT5__GPIO4_IO26 | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_DISP0_DAT7__ECSPI3_RDY | MUX_PAD_CTRL(SPI_PAD_CTRL), +}; + +static void novena_spl_setup_iomux_spi(void) +{ + imx_iomux_v3_setup_multiple_pads(ecspi3_pads, ARRAY_SIZE(ecspi3_pads)); + /* De-assert the nCS */ + gpio_direction_output(MX6_PAD_DISP0_DAT3__GPIO4_IO24, 1); + gpio_direction_output(MX6_PAD_DISP0_DAT4__GPIO4_IO25, 1); + gpio_direction_output(MX6_PAD_DISP0_DAT5__GPIO4_IO26, 1); +} +#else +static void novena_spl_setup_iomux_spi(void) {} +#endif + +/* + * UART + */ +static iomux_v3_cfg_t const uart2_pads[] = { + MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const uart3_pads[] = { + MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static iomux_v3_cfg_t const uart4_pads[] = { + MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT16__UART4_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT17__UART4_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), + +}; + +static void novena_spl_setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); + imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads)); + imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads)); +} + +/* + * Video + */ +#ifdef CONFIG_VIDEO +static iomux_v3_cfg_t hdmi_pads[] = { + /* "Ghost HPD" pin */ + MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void novena_spl_setup_iomux_video(void) +{ + imx_iomux_v3_setup_multiple_pads(hdmi_pads, ARRAY_SIZE(hdmi_pads)); + gpio_direction_input(NOVENA_HDMI_GHOST_HPD); +} +#else +static inline void novena_spl_setup_iomux_video(void) {} +#endif + +/* + * SPL boots from uSDHC card + */ +#ifdef CONFIG_FSL_ESDHC +static struct fsl_esdhc_cfg usdhc_cfg = { + USDHC3_BASE_ADDR, 0, 4 +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + /* There is no CD for a microSD card, assume always present. */ + return 1; +} + +int board_mmc_init(bd_t *bis) +{ + usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + return fsl_esdhc_initialize(bis, &usdhc_cfg); +} +#endif + +/* Configure MX6Q/DUAL mmdc DDR io registers */ +static struct mx6dq_iomux_ddr_regs novena_ddr_ioregs = { + /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */ + .dram_sdclk_0 = 0x00020038, + .dram_sdclk_1 = 0x00020038, + .dram_cas = 0x00000038, + .dram_ras = 0x00000038, + .dram_reset = 0x00000038, + /* SDCKE[0:1]: 100k pull-up */ + .dram_sdcke0 = 0x00003000, + .dram_sdcke1 = 0x00003000, + /* SDBA2: pull-up disabled */ + .dram_sdba2 = 0x00000000, + /* SDODT[0:1]: 100k pull-up, 40 ohm */ + .dram_sdodt0 = 0x00000038, + .dram_sdodt1 = 0x00000038, + /* SDQS[0:7]: Differential input, 40 ohm */ + .dram_sdqs0 = 0x00000038, + .dram_sdqs1 = 0x00000038, + .dram_sdqs2 = 0x00000038, + .dram_sdqs3 = 0x00000038, + .dram_sdqs4 = 0x00000038, + .dram_sdqs5 = 0x00000038, + .dram_sdqs6 = 0x00000038, + .dram_sdqs7 = 0x00000038, + + /* DQM[0:7]: Differential input, 40 ohm */ + .dram_dqm0 = 0x00000038, + .dram_dqm1 = 0x00000038, + .dram_dqm2 = 0x00000038, + .dram_dqm3 = 0x00000038, + .dram_dqm4 = 0x00000038, + .dram_dqm5 = 0x00000038, + .dram_dqm6 = 0x00000038, + .dram_dqm7 = 0x00000038, +}; + +/* Configure MX6Q/DUAL mmdc GRP io registers */ +static struct mx6dq_iomux_grp_regs novena_grp_ioregs = { + /* DDR3 */ + .grp_ddr_type = 0x000c0000, + .grp_ddrmode_ctl = 0x00020000, + /* Disable DDR pullups */ + .grp_ddrpke = 0x00000000, + /* ADDR[00:16], SDBA[0:1]: 40 ohm */ + .grp_addds = 0x00000038, + /* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */ + .grp_ctlds = 0x00000038, + /* DATA[00:63]: Differential input, 40 ohm */ + .grp_ddrmode = 0x00020000, + .grp_b0ds = 0x00000038, + .grp_b1ds = 0x00000038, + .grp_b2ds = 0x00000038, + .grp_b3ds = 0x00000038, + .grp_b4ds = 0x00000038, + .grp_b5ds = 0x00000038, + .grp_b6ds = 0x00000038, + .grp_b7ds = 0x00000038, +}; + +static struct mx6_mmdc_calibration novena_mmdc_calib = { + /* write leveling calibration determine */ + .p0_mpwldectrl0 = 0x00420048, + .p0_mpwldectrl1 = 0x006f0059, + .p1_mpwldectrl0 = 0x005a0104, + .p1_mpwldectrl1 = 0x01070113, + /* Read DQS Gating calibration */ + .p0_mpdgctrl0 = 0x437c040b, + .p0_mpdgctrl1 = 0x0413040e, + .p1_mpdgctrl0 = 0x444f0446, + .p1_mpdgctrl1 = 0x044d0422, + /* Read Calibration: DQS delay relative to DQ read access */ + .p0_mprddlctl = 0x4c424249, + .p1_mprddlctl = 0x4e48414f, + /* Write Calibration: DQ/DM delay relative to DQS write access */ + .p0_mpwrdlctl = 0x42414641, + .p1_mpwrdlctl = 0x46374b43, +}; + +static struct mx6_ddr_sysinfo novena_ddr_info = { + /* Width of data bus: 0=16, 1=32, 2=64 */ + .dsize = 2, + /* Config for full 4GB range so that get_mem_size() works */ + .cs_density = 32, /* 32Gb per CS */ + /* Single chip select */ + .ncs = 1, + .cs1_mirror = 0, + .rtt_wr = 1, /* RTT_Wr = RZQ/4 */ + .rtt_nom = 2, /* RTT_Nom = RZQ/2 */ + .walat = 3, /* Write additional latency */ + .ralat = 7, /* Read additional latency */ + .mif3_mode = 3, /* Command prediction working mode */ + .bi_on = 1, /* Bank interleaving enabled */ + .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ + .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ +}; + +static struct mx6_ddr3_cfg elpida_4gib_1600 = { + .mem_speed = 1600, + .density = 4, + .width = 64, + .banks = 8, + .rowaddr = 16, + .coladdr = 10, + .pagesz = 2, + .trcd = 1300, + .trcmin = 4900, + .trasmin = 3590, +}; + +/* + * called from C runtime startup code (arch/arm/lib/crt0.S:_main) + * - we have a stack and a place to store GD, both in SRAM + * - no variable global data is available + */ +void board_init_f(ulong dummy) +{ + /* setup AIPS and disable watchdog */ + arch_cpu_init(); + + /* setup GP timer */ + timer_init(); + +#ifdef CONFIG_BOARD_POSTCLK_INIT + board_postclk_init(); +#endif +#ifdef CONFIG_FSL_ESDHC + get_clocks(); +#endif + + /* Setup IOMUX and configure basics. */ + novena_spl_setup_iomux_audio(); + novena_spl_setup_iomux_buttons(); + novena_spl_setup_iomux_enet(); + novena_spl_setup_iomux_fpga(); + novena_spl_setup_iomux_i2c(); + novena_spl_setup_iomux_pcie(); + novena_spl_setup_iomux_sdhc(); + novena_spl_setup_iomux_spi(); + novena_spl_setup_iomux_uart(); + novena_spl_setup_iomux_video(); + + /* UART clocks enabled and gd valid - init serial console */ + preloader_console_init(); + + /* Start the DDR DRAM */ + mx6dq_dram_iocfg(64, &novena_ddr_ioregs, &novena_grp_ioregs); + mx6_dram_cfg(&novena_ddr_info, &novena_mmdc_calib, &elpida_4gib_1600); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + /* load/boot image from boot device */ + board_init_r(NULL, 0); +} + +void reset_cpu(ulong addr) +{ +} diff --git a/board/kosagi/novena/setup.cfg b/board/kosagi/novena/setup.cfg new file mode 100644 index 0000000000..18d139c342 --- /dev/null +++ b/board/kosagi/novena/setup.cfg @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2014 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* Boot Device : sd */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +/* set the default clock gate to save power */ +DATA 4, CCM_CCGR0, 0x00C03F3F +DATA 4, CCM_CCGR1, 0x0030FC03 +DATA 4, CCM_CCGR2, 0x0FFFC000 +DATA 4, CCM_CCGR3, 0x3FF00000 +DATA 4, CCM_CCGR4, 0xFFFFF300 /* enable NAND/GPMI/BCH clocks */ +DATA 4, CCM_CCGR5, 0x0F0000C3 +DATA 4, CCM_CCGR6, 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4, MX6_IOMUXC_GPR6, 0x007F007F +DATA 4, MX6_IOMUXC_GPR7, 0x007F007F + +/* + * Setup CCM_CCOSR register as follows: + * + * cko1_en = 1 --> CKO1 enabled + * cko1_div = 111 --> divide by 8 + * cko1_sel = 1011 --> ahb_clk_root + * + * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz + */ +DATA 4, CCM_CCOSR, 0x000000fb diff --git a/board/matrix_vision/common/Makefile b/board/matrix_vision/common/Makefile deleted file mode 100644 index 699da1ca27..0000000000 --- a/board/matrix_vision/common/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = mv_common.o diff --git a/board/matrix_vision/common/mv_common.c b/board/matrix_vision/common/mv_common.c deleted file mode 100644 index 1be5aba2e9..0000000000 --- a/board/matrix_vision/common/mv_common.c +++ /dev/null @@ -1,112 +0,0 @@ -/* - * (C) Copyright 2008 - * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <malloc.h> -#include <environment.h> -#include <fpga.h> -#include <asm/io.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_ENV_IS_NOWHERE -static char* entries_to_keep[] = { - "serial#", "ethaddr", "eth1addr", "model_info", "sensor_cnt", - "fpgadatasize", "ddr_size", "use_dhcp", "use_static_ipaddr", - "static_ipaddr", "static_netmask", "static_gateway", - "syslog", "watchdog", "netboot", "evo8serialnumber" }; - -#define MV_MAX_ENV_ENTRY_LENGTH 64 -#define MV_KEEP_ENTRIES ARRAY_SIZE(entries_to_keep) - -void mv_reset_environment(void) -{ - int i; - char *s[MV_KEEP_ENTRIES]; - char entries[MV_KEEP_ENTRIES][MV_MAX_ENV_ENTRY_LENGTH]; - - printf("\n*** RESET ENVIRONMENT ***\n"); - - memset(entries, 0, MV_KEEP_ENTRIES * MV_MAX_ENV_ENTRY_LENGTH); - for (i = 0; i < MV_KEEP_ENTRIES; i++) { - s[i] = getenv(entries_to_keep[i]); - if (s[i]) { - printf("save '%s' : %s\n", entries_to_keep[i], s[i]); - strncpy(entries[i], s[i], MV_MAX_ENV_ENTRY_LENGTH); - } - } - - gd->env_valid = 0; - env_relocate(); - - for (i = 0; i < MV_KEEP_ENTRIES; i++) { - if (s[i]) { - printf("restore '%s' : %s\n", entries_to_keep[i], s[i]); - setenv(entries_to_keep[i], s[i]); - } - } - - saveenv(); -} -#endif - -int mv_load_fpga(void) -{ - int result; - size_t data_size = 0; - void *fpga_data = NULL; - char *datastr = getenv("fpgadata"); - char *sizestr = getenv("fpgadatasize"); - - if (getenv("skip_fpga")) { - printf("found 'skip_fpga' -> FPGA _not_ loaded !\n"); - return -1; - } - printf("loading FPGA\n"); - - if (datastr) - fpga_data = (void *)simple_strtoul(datastr, NULL, 16); - if (sizestr) - data_size = (size_t)simple_strtoul(sizestr, NULL, 16); - if (!data_size) { - printf("fpgadatasize invalid -> FPGA _not_ loaded !\n"); - return -1; - } - - result = fpga_load(0, fpga_data, data_size, BIT_FULL); - if (!result) - bootstage_mark(BOOTSTAGE_ID_START); - - return result; -} - -u8 *dhcp_vendorex_prep(u8 *e) -{ - char *ptr; - - /* DHCP vendor-class-identifier = 60 */ - if ((ptr = getenv("dhcp_vendor-class-identifier"))) { - *e++ = 60; - *e++ = strlen(ptr); - while (*ptr) - *e++ = *ptr++; - } - /* DHCP_CLIENT_IDENTIFIER = 61 */ - if ((ptr = getenv("dhcp_client_id"))) { - *e++ = 61; - *e++ = strlen(ptr); - while (*ptr) - *e++ = *ptr++; - } - - return e; -} - -u8 *dhcp_vendorex_proc(u8 *popt) -{ - return NULL; -} diff --git a/board/matrix_vision/common/mv_common.h b/board/matrix_vision/common/mv_common.h deleted file mode 100644 index 369394356c..0000000000 --- a/board/matrix_vision/common/mv_common.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Copyright 2008 Matrix Vision GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -extern int mv_load_fpga(void); -extern void mv_reset_environment(void); diff --git a/board/matrix_vision/mvblx/sys_eeprom.c b/board/matrix_vision/mvblx/sys_eeprom.c index 1a2ac8d6c8..db42987010 100644 --- a/board/matrix_vision/mvblx/sys_eeprom.c +++ b/board/matrix_vision/mvblx/sys_eeprom.c @@ -348,7 +348,7 @@ int mac_read_from_eeprom(void) if (memcmp(&e.mac, "\0\0\0\0\0\0", 6) && memcmp(&e.mac, "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) { - char ethaddr[9]; + char ethaddr[18]; sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", e.mac[0], diff --git a/board/micronas/vct/Kconfig b/board/micronas/vct/Kconfig index 75046fe7ab..288a1aeb70 100644 --- a/board/micronas/vct/Kconfig +++ b/board/micronas/vct/Kconfig @@ -1,8 +1,5 @@ if TARGET_VCT -config SYS_CPU - default "mips32" - config SYS_BOARD default "vct" @@ -12,4 +9,28 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "vct" +menu "vct board options" + +choice + prompt "Board variant" + +config VCT_PLATINUM + bool "Enable VCT_PLATINUM" + +config VCT_PLATINUMAVC + bool "Enable VCT_PLATINUMAVC" + +config VCT_PREMIUM + bool "Enable VCT_PLATINUMAVC" + +endchoice + +config VCT_ONENAND + bool "Enable VCT_ONENAND" + +config VCT_SMALL_IMAGE + bool "Enable VCT_SMALL_IMAGE" + +endmenu + endif diff --git a/board/pb1x00/Kconfig b/board/pb1x00/Kconfig index ef2844a497..251db6ab63 100644 --- a/board/pb1x00/Kconfig +++ b/board/pb1x00/Kconfig @@ -1,8 +1,5 @@ if TARGET_PB1X00 -config SYS_CPU - default "mips32" - config SYS_BOARD default "pb1x00" diff --git a/board/qemu-mips/Kconfig b/board/qemu-mips/Kconfig index e4d9663c2d..18d78b5100 100644 --- a/board/qemu-mips/Kconfig +++ b/board/qemu-mips/Kconfig @@ -1,25 +1,10 @@ if TARGET_QEMU_MIPS -config SYS_CPU - default "mips32" - -config SYS_BOARD - default "qemu-mips" - -config SYS_CONFIG_NAME - default "qemu-mips" - -endif - -if TARGET_QEMU_MIPS64 - -config SYS_CPU - default "mips64" - config SYS_BOARD default "qemu-mips" config SYS_CONFIG_NAME - default "qemu-mips64" + default "qemu-mips" if 32BIT + default "qemu-mips64" if 64BIT endif diff --git a/board/renesas/alt/alt.c b/board/renesas/alt/alt.c index 9d8e8f96be..5c5a86f145 100644 --- a/board/renesas/alt/alt.c +++ b/board/renesas/alt/alt.c @@ -43,7 +43,7 @@ void s_init(void) #define MSTPSR7 0xE61501C4 #define SMSTPCR7 0xE615014C -#define SCIF0_MSTP719 (1 << 19) +#define SCIF2_MSTP719 (1 << 19) #define MSTPSR8 0xE61509A0 #define SMSTPCR8 0xE6150990 @@ -63,8 +63,8 @@ int board_early_init_f(void) /* TMU */ mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125); - /* SCIF0 */ - mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF0_MSTP719); + /* SCIF2 */ + mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF2_MSTP719); /* ETHER */ mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813); @@ -140,7 +140,6 @@ int board_eth_init(bd_t *bis) int dram_init(void) { - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; gd->ram_size = CONFIG_SYS_SDRAM_SIZE; return 0; diff --git a/board/renesas/alt/qos.c b/board/renesas/alt/qos.c index d788aa0ffb..f0b349f18f 100644 --- a/board/renesas/alt/qos.c +++ b/board/renesas/alt/qos.c @@ -13,6 +13,7 @@ #include <asm/io.h> #include <asm/arch/rmobile.h> +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) /* QoS version 0.11 */ enum { @@ -942,3 +943,8 @@ void qos_init(void) writel(0x00000001, &axi_qos->qosthres2); writel(0x00000001, &axi_qos->qosqon); } +#else /* CONFIG_RMOBILE_EXTRAM_BOOT */ +void qos_init(void) +{ +} +#endif /* CONFIG_RMOBILE_EXTRAM_BOOT */ diff --git a/board/renesas/koelsch/koelsch.c b/board/renesas/koelsch/koelsch.c index bfd0cc6884..37202f9815 100644 --- a/board/renesas/koelsch/koelsch.c +++ b/board/renesas/koelsch/koelsch.c @@ -150,7 +150,6 @@ int board_eth_init(bd_t *bis) int dram_init(void) { - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; gd->ram_size = CONFIG_SYS_SDRAM_SIZE; return 0; diff --git a/board/renesas/koelsch/qos.c b/board/renesas/koelsch/qos.c index ecf3eeddd7..d293e3d7fc 100644 --- a/board/renesas/koelsch/qos.c +++ b/board/renesas/koelsch/qos.c @@ -14,7 +14,7 @@ #include <asm/arch/rmobile.h> /* QoS version 0.240 for ES1 and version 0.334 for ES2 */ - +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) enum { DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04, DBSC3_05, DBSC3_06, DBSC3_07, DBSC3_08, DBSC3_09, @@ -1304,3 +1304,8 @@ void qos_init(void) writel(0x00000001, &axi_qos->qosthres2); writel(0x00000001, &axi_qos->qosqon); } +#else /* CONFIG_RMOBILE_EXTRAM_BOOT */ +void qos_init(void) +{ +} +#endif /* CONFIG_RMOBILE_EXTRAM_BOOT */ diff --git a/board/renesas/lager/lager.c b/board/renesas/lager/lager.c index 5302839b33..2bb87108f6 100644 --- a/board/renesas/lager/lager.c +++ b/board/renesas/lager/lager.c @@ -36,9 +36,14 @@ void s_init(void) /* CPU frequency setting. Set to 1.4GHz */ if (rmobile_get_cpu_rev_integer() >= R8A7790_CUT_ES2X) { + u32 stat = 0; u32 stc = ((1400 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) << PLL0_STC_BIT; clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc); + + do { + stat = readl(PLLECR) & PLL0ST; + } while (stat == 0x0); } /* QoS(Quality-of-Service) Init */ @@ -160,7 +165,6 @@ int board_phy_config(struct phy_device *phydev) int dram_init(void) { - gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; gd->ram_size = CONFIG_SYS_SDRAM_SIZE; return 0; diff --git a/board/renesas/lager/qos.c b/board/renesas/lager/qos.c index ce7f8ba10c..dec37d2bf9 100644 --- a/board/renesas/lager/qos.c +++ b/board/renesas/lager/qos.c @@ -13,7 +13,7 @@ #include <asm/arch/rmobile.h> /* QoS version 0.955 for ES1 and version 0.963 for ES2 */ - +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) enum { DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04, DBSC3_05, DBSC3_06, DBSC3_07, DBSC3_08, DBSC3_09, @@ -2381,3 +2381,8 @@ void qos_init(void) else qos_init_es1(); } +#else /* CONFIG_RMOBILE_EXTRAM_BOOT */ +void qos_init(void) +{ +} +#endif /* CONFIG_RMOBILE_EXTRAM_BOOT */ diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c index 5edb250f06..33003ee9b5 100644 --- a/board/samsung/odroid/odroid.c +++ b/board/samsung/odroid/odroid.c @@ -356,21 +356,29 @@ static void board_clock_init(void) static void board_gpio_init(void) { /* eMMC Reset Pin */ + gpio_request(EXYNOS4X12_GPIO_K12, "eMMC Reset"); + gpio_cfg_pin(EXYNOS4X12_GPIO_K12, S5P_GPIO_FUNC(0x1)); gpio_set_pull(EXYNOS4X12_GPIO_K12, S5P_GPIO_PULL_NONE); gpio_set_drv(EXYNOS4X12_GPIO_K12, S5P_GPIO_DRV_4X); /* Enable FAN (Odroid U3) */ + gpio_request(EXYNOS4X12_GPIO_D00, "FAN Control"); + gpio_set_pull(EXYNOS4X12_GPIO_D00, S5P_GPIO_PULL_UP); gpio_set_drv(EXYNOS4X12_GPIO_D00, S5P_GPIO_DRV_4X); gpio_direction_output(EXYNOS4X12_GPIO_D00, 1); /* OTG Vbus output (Odroid U3+) */ + gpio_request(EXYNOS4X12_GPIO_L20, "OTG Vbus"); + gpio_set_pull(EXYNOS4X12_GPIO_L20, S5P_GPIO_PULL_NONE); gpio_set_drv(EXYNOS4X12_GPIO_L20, S5P_GPIO_DRV_4X); gpio_direction_output(EXYNOS4X12_GPIO_L20, 0); /* OTG INT (Odroid U3+) */ + gpio_request(EXYNOS4X12_GPIO_X31, "OTG INT"); + gpio_set_pull(EXYNOS4X12_GPIO_X31, S5P_GPIO_PULL_UP); gpio_set_drv(EXYNOS4X12_GPIO_X31, S5P_GPIO_DRV_4X); gpio_direction_input(EXYNOS4X12_GPIO_X31); @@ -403,7 +411,6 @@ static void board_init_i2c(void) int exynos_early_init_f(void) { board_clock_init(); - board_gpio_init(); return 0; } @@ -414,6 +421,8 @@ int exynos_init(void) gd->ram_size -= SZ_1M; gd->bd->bi_dram[CONFIG_NR_DRAM_BANKS - 1].size -= SZ_1M; + board_gpio_init(); + return 0; } diff --git a/board/scb9328/flash.c b/board/scb9328/flash.c index e3a582f3dc..73bfa00eed 100644 --- a/board/scb9328/flash.c +++ b/board/scb9328/flash.c @@ -72,8 +72,10 @@ static FLASH_BUS_RET flash_status_reg (void) FLASH_BUS *addr = (FLASH_BUS *) 0; + /* cppcheck-suppress nullPointer */ *addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER); + /* cppcheck-suppress nullPointer */ return *addr; } diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c index 64e69dc93d..559af0e0e5 100644 --- a/board/siemens/pxm2/board.c +++ b/board/siemens/pxm2/board.c @@ -229,7 +229,7 @@ int board_eth_init(bd_t *bis) #endif /* #ifdef CONFIG_FACTORYSET */ /* Set rgmii mode and enable rmii clock to be sourced from chip */ - writel(RGMII_MODE_ENABLE , &cdev->miisel); + writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel); rv = cpsw_register(&cpsw_data); if (rv < 0) diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 28df187840..5b2d091122 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -1,12 +1,141 @@ -if TARGET_SUN4I || TARGET_SUN5I || TARGET_SUN6I || TARGET_SUN7I || TARGET_SUN8I +if ARCH_SUNXI + +choice + prompt "Sunxi SoC Variant" + +config MACH_SUN4I + bool "sun4i (Allwinner A10)" + select CPU_V7 + select SUPPORT_SPL + +config MACH_SUN5I + bool "sun5i (Allwinner A13)" + select CPU_V7 + select SUPPORT_SPL + +config MACH_SUN6I + bool "sun6i (Allwinner A31)" + select CPU_V7 + +config MACH_SUN7I + bool "sun7i (Allwinner A20)" + select CPU_V7 + select SUPPORT_SPL + +config MACH_SUN8I + bool "sun8i (Allwinner A23)" + select CPU_V7 + +endchoice config SYS_CONFIG_NAME string - default "sun4i" if TARGET_SUN4I - default "sun5i" if TARGET_SUN5I - default "sun6i" if TARGET_SUN6I - default "sun7i" if TARGET_SUN7I - default "sun8i" if TARGET_SUN8I + default "sun4i" if MACH_SUN4I + default "sun5i" if MACH_SUN5I + default "sun6i" if MACH_SUN6I + default "sun7i" if MACH_SUN7I + default "sun8i" if MACH_SUN8I + +choice + prompt "Board" + +config TARGET_A10_OLINUXINO_L + bool "A10_OLINUXINO_L" + depends on MACH_SUN4I + +config TARGET_A10S_OLINUXINO_M + bool "A10S_OLINUXINO_M" + depends on MACH_SUN5I + +config TARGET_A13_OLINUXINOM + bool "A13_OLINUXINOM" + depends on MACH_SUN5I + +config TARGET_A13_OLINUXINO + bool "A13_OLINUXINO" + depends on MACH_SUN5I + +config TARGET_A20_OLINUXINO_L2 + bool "A20_OLINUXINO_L2" + depends on MACH_SUN7I + +config TARGET_A20_OLINUXINO_L + bool "A20_OLINUXINO_L" + depends on MACH_SUN7I + +config TARGET_A20_OLINUXINO_M + bool "A20_OLINUXINO_M" + depends on MACH_SUN7I + +config TARGET_AUXTEK_T004 + bool "AUXTEK_T004" + depends on MACH_SUN5I + +config TARGET_BANANAPI + bool "BANANAPI" + depends on MACH_SUN7I + +config TARGET_COLOMBUS + bool "COLOMBUS" + depends on MACH_SUN6I + +config TARGET_CUBIEBOARD2 + bool "CUBIEBOARD2" + depends on MACH_SUN7I + +config TARGET_CUBIEBOARD + bool "CUBIEBOARD" + depends on MACH_SUN4I + +config TARGET_CUBIETRUCK + bool "CUBIETRUCK" + depends on MACH_SUN7I + +config TARGET_IPPO_Q8H_V5 + bool "IPPO_Q8H_V5" + depends on MACH_SUN8I + +config TARGET_PCDUINO3 + bool "PCDUINO3" + depends on MACH_SUN7I + +config TARGET_MELE_A1000G + bool "MELE_A1000G" + depends on MACH_SUN4I + +config TARGET_MELE_A1000 + bool "MELE_A1000" + depends on MACH_SUN4I + +config TARGET_MELE_M3 + bool "MELE_M3" + depends on MACH_SUN7I + +config TARGET_MINI_X_1GB + bool "MINI_X_1GB" + depends on MACH_SUN4I + +config TARGET_MINI_X + bool "MINI_X" + depends on MACH_SUN4I + +config TARGET_BA10_TV_BOX + bool "BA10_TV_BOX" + depends on MACH_SUN4I + +config TARGET_I12_TVBOX + bool "I12_TVBOX" + depends on MACH_SUN7I + +config TARGET_QT840A + bool "QT840A" + depends on MACH_SUN7I + +config TARGET_R7DONGLE + bool "R7DONGLE" + depends on MACH_SUN5I + +endchoice config SYS_BOARD default "sunxi" @@ -14,6 +143,11 @@ config SYS_BOARD config SYS_SOC default "sunxi" +config SPL_FEL + bool "SPL/FEL mode support" + depends on SPL + default n + config FDTFILE string "Default fdtfile env setting for this board" diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index febd126cb8..b3c77a83cb 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -22,6 +22,7 @@ F: configs/A20-OLinuXino_MICRO_defconfig F: configs/Bananapi_defconfig F: configs/i12-tvbox_defconfig F: configs/Linksprite_pcDuino3_defconfig +F: configs/Linksprite_pcDuino3_fdt_defconfig F: configs/qt840a_defconfig CUBIEBOARD2 BOARD @@ -52,6 +53,6 @@ S: Maintained F: configs/Colombus_defconfig IPPO-Q8H-V5 BOARD -M: CHen-Yu Tsai <wens@csie.org> +M: Chen-Yu Tsai <wens@csie.org> S: Maintained F: configs/Ippo_q8h_v5_defconfig diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile index 6a2e4c9d5b..b84ff9b8ef 100644 --- a/board/sunxi/Makefile +++ b/board/sunxi/Makefile @@ -11,26 +11,26 @@ obj-y += board.o obj-$(CONFIG_SUNXI_GMAC) += gmac.o obj-$(CONFIG_SUNXI_AHCI) += ahci.o -obj-$(CONFIG_A10_OLINUXINO_L) += dram_a10_olinuxino_l.o -obj-$(CONFIG_A10S_OLINUXINO_M) += dram_a10s_olinuxino_m.o -obj-$(CONFIG_A13_OLINUXINO) += dram_a13_olinuxino.o -obj-$(CONFIG_A13_OLINUXINOM) += dram_a13_oli_micro.o -obj-$(CONFIG_A20_OLINUXINO_L) += dram_a20_olinuxino_l.o -obj-$(CONFIG_A20_OLINUXINO_L2) += dram_a20_olinuxino_l2.o -obj-$(CONFIG_A20_OLINUXINO_M) += dram_sun7i_384_1024_iow16.o +obj-$(CONFIG_TARGET_A10_OLINUXINO_L) += dram_a10_olinuxino_l.o +obj-$(CONFIG_TARGET_A10S_OLINUXINO_M) += dram_a10s_olinuxino_m.o +obj-$(CONFIG_TARGET_A13_OLINUXINO) += dram_a13_olinuxino.o +obj-$(CONFIG_TARGET_A13_OLINUXINOM) += dram_a13_oli_micro.o +obj-$(CONFIG_TARGET_A20_OLINUXINO_L) += dram_a20_olinuxino_l.o +obj-$(CONFIG_TARGET_A20_OLINUXINO_L2) += dram_a20_olinuxino_l2.o +obj-$(CONFIG_TARGET_A20_OLINUXINO_M) += dram_sun7i_384_1024_iow16.o # This is not a typo, uses the same mem settings as the a10s-olinuxino-m -obj-$(CONFIG_AUXTEK_T004) += dram_a10s_olinuxino_m.o -obj-$(CONFIG_BA10_TV_BOX) += dram_sun4i_384_1024_iow8.o -obj-$(CONFIG_BANANAPI) += dram_bananapi.o -obj-$(CONFIG_CUBIEBOARD) += dram_cubieboard.o -obj-$(CONFIG_CUBIEBOARD2) += dram_cubieboard2.o -obj-$(CONFIG_CUBIETRUCK) += dram_cubietruck.o -obj-$(CONFIG_I12_TVBOX) += dram_sun7i_384_1024_iow16.o -obj-$(CONFIG_MELE_A1000) += dram_sun4i_360_512.o -obj-$(CONFIG_MELE_A1000G) += dram_sun4i_360_1024_iow8.o -obj-$(CONFIG_MELE_M3) += dram_sun7i_384_1024_iow16.o -obj-$(CONFIG_MINI_X) += dram_sun4i_360_512.o -obj-$(CONFIG_MINI_X_1GB) += dram_sun4i_360_1024_iow16.o -obj-$(CONFIG_PCDUINO3) += dram_linksprite_pcduino3.o -obj-$(CONFIG_QT840A) += dram_sun7i_384_512_busw16_iow16.o -obj-$(CONFIG_R7DONGLE) += dram_r7dongle.o +obj-$(CONFIG_TARGET_AUXTEK_T004) += dram_a10s_olinuxino_m.o +obj-$(CONFIG_TARGET_BA10_TV_BOX) += dram_sun4i_384_1024_iow8.o +obj-$(CONFIG_TARGET_BANANAPI) += dram_bananapi.o +obj-$(CONFIG_TARGET_CUBIEBOARD) += dram_cubieboard.o +obj-$(CONFIG_TARGET_CUBIEBOARD2) += dram_cubieboard2.o +obj-$(CONFIG_TARGET_CUBIETRUCK) += dram_cubietruck.o +obj-$(CONFIG_TARGET_I12_TVBOX) += dram_sun7i_384_1024_iow16.o +obj-$(CONFIG_TARGET_MELE_A1000) += dram_sun4i_360_512.o +obj-$(CONFIG_TARGET_MELE_A1000G) += dram_sun4i_360_1024_iow8.o +obj-$(CONFIG_TARGET_MELE_M3) += dram_sun7i_384_1024_iow16.o +obj-$(CONFIG_TARGET_MINI_X) += dram_sun4i_360_512.o +obj-$(CONFIG_TARGET_MINI_X_1GB) += dram_sun4i_360_1024_iow16.o +obj-$(CONFIG_TARGET_PCDUINO3) += dram_linksprite_pcduino3.o +obj-$(CONFIG_TARGET_QT840A) += dram_sun7i_384_512_busw16_iow16.o +obj-$(CONFIG_TARGET_R7DONGLE) += dram_r7dongle.o diff --git a/board/sunxi/ahci.c b/board/sunxi/ahci.c index 0c262eabb7..5e123285b0 100644 --- a/board/sunxi/ahci.c +++ b/board/sunxi/ahci.c @@ -74,6 +74,7 @@ void scsi_init(void) { printf("SUNXI SCSI INIT\n"); #ifdef CONFIG_SATAPWR + gpio_request(CONFIG_SATAPWR, "satapwr"); gpio_direction_output(CONFIG_SATAPWR, 1); #endif diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig index b9f6bd7122..1ddbb2c67c 100644 --- a/board/ti/am335x/Kconfig +++ b/board/ti/am335x/Kconfig @@ -22,4 +22,19 @@ config CONS_INDEX board you may want something other than UART0 as for example the IDK uses UART3 so enter 4 here. +config NOR + bool "Support for NOR flash" + help + The AM335x SoC supports having a NOR flash connected to the GPMC. + In practice this is seen as a NOR flash module connected to the + "memory cape" for the BeagleBone family. + +config NOR_BOOT + bool "Support for booting from NOR flash" + depends on NOR + help + Enabling this will make a U-Boot binary that is capable of being + booted via NOR. In this case we will enable certain pinmux early + as the ROM only partially sets up pinmux. We also default to using + NOR for environment. endif diff --git a/board/ti/ks2_evm/README b/board/ti/ks2_evm/README index a551e2869a..9ee90a4f9d 100644 --- a/board/ti/ks2_evm/README +++ b/board/ti/ks2_evm/README @@ -3,10 +3,11 @@ U-Boot port for Texas Instruments Keystone II EVM boards Author: Murali Karicheri <m-karicheri2@ti.com> -This README has information on the u-boot port for K2HK, K2E boards. +This README has information on the u-boot port for K2HK, K2E, and K2L EVM boards. Documentation for this board can be found at http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html +https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html The K2HK board is based on Texas Instruments Keystone2 family of SoCs: K2H, K2K. More details on these SoCs are available at company websites @@ -14,7 +15,10 @@ More details on these SoCs are available at company websites K2H: http://www.ti.com/product/tci6638k2h The K2E SoC details are available at - K2E http://www.ti.com/lit/ds/symlink/66ak2e05.pdf + http://www.ti.com/lit/ds/symlink/66ak2e05.pdf + +The K2L SoC details are available at + http://www.ti.com/lit/ds/symlink/tci6630k2l.pdf Board configuration: ==================== @@ -25,6 +29,7 @@ Some of the peripherals that are configured by u-boot +------+-------+-------+-----------+-----------+-------+-------+----+ |K2HK |2 |512MB |6MB |4(2) |2 |3 |3 | |K2E |4 |512MB |2MB |8(2) |2 |3 |3 | +|K2L |2 |512MB |2MB |4(2) |4 |3 |3 | +------+-------+-------+-----------+-----------+-------+-------+----+ There are only 2 eth port installed on the boards. @@ -41,10 +46,13 @@ The port related files can be found at following folders Board configuration files: include/configs/k2hk_evm.h include/configs/k2e_evm.h +include/configs/k2l_evm.h +include/configs/k2l_evm.h As u-boot is migrating to Kconfig there is also board defconfig files configs/k2e_evm_defconfig configs/k2hk_evm_defconfig +configs/k2l_evm_defconfig Supported boot modes: - SPI NOR boot @@ -58,7 +66,7 @@ Supported image formats: Build instructions: =================== -Examples for k2hk, for k2e just replace k2hk prefix accordingly. +Examples for k2hk, for k2e and k2l just replace k2hk prefix accordingly. Don't forget to add ARCH=arm and CROSS_COMPILE. To build u-boot.bin @@ -84,6 +92,8 @@ Use u-boot.bin from the build folder for loading and running u-boot binary on EVM. Follow instructions at K2HK http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup K2E http://processors.wiki.ti.com/index.php/EVMK2E_Hardware_Setup +K2L http://processors.wiki.ti.com/index.php/TCIEVMK2L_Hardware_Setup + to configure SW1 dip switch to use "No Boot/JTAG DSP Little Endian Boot Mode" and Power ON the EVM. Follow instructions to connect serial port of EVM to PC and start TeraTerm or Hyper Terminal. @@ -128,8 +138,8 @@ instructions: 2. Suspend Target. Select Run -> Suspend from top level menu CortexA15_1 (Free Running)" 3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000 - through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E EVM - using CCS", but using address 0x87000000. + through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E/K2L + EVM using CCS", but using address 0x87000000. 4. Free Run the target as described earlier (step 4) to get u-boot prompt 5. At the U-Boot console type following to setup u-boot environment variables. setenv addr_uboot 0x87000000 diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c index 4029493452..ff7bc4bb18 100644 --- a/board/ti/ks2_evm/board.c +++ b/board/ti/ks2_evm/board.c @@ -122,7 +122,6 @@ void ft_board_setup(void *blob, bd_t *bd) int nbanks; u64 size[2]; u64 start[2]; - char name[32]; int nodeoffset; u32 ddr3a_size; int unitrd_fixup = 0; @@ -158,15 +157,13 @@ void ft_board_setup(void *blob, bd_t *bd) } /* reserve memory at start of bank */ - sprintf(name, "mem_reserve_head"); - env = getenv(name); + env = getenv("mem_reserve_head"); if (env) { start[0] += ustrtoul(env, &endp, 0); size[0] -= ustrtoul(env, &endp, 0); } - sprintf(name, "mem_reserve"); - env = getenv(name); + env = getenv("mem_reserve"); if (env) size[0] -= ustrtoul(env, &endp, 0); diff --git a/board/ti/ks2_evm/board_k2l.c b/board/ti/ks2_evm/board_k2l.c index 559d20ca88..729a193239 100644 --- a/board/ti/ks2_evm/board_k2l.c +++ b/board/ti/ks2_evm/board_k2l.c @@ -10,7 +10,7 @@ #include <common.h> #include <asm/arch/ddr3.h> #include <asm/arch/hardware.h> -#include <asm/ti-common/ti-aemif.h> +#include <asm/ti-common/keystone_net.h> DECLARE_GLOBAL_DATA_PTR; @@ -42,6 +42,44 @@ static struct pll_init_data tetris_pll_config[] = { static struct pll_init_data pa_pll_config = PASS_PLL_983; +#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET +struct eth_priv_t eth_priv_cfg[] = { + { + .int_name = "K2L_EMAC", + .rx_flow = 0, + .phy_addr = 0, + .slave_port = 1, + .sgmii_link_type = SGMII_LINK_MAC_PHY, + }, + { + .int_name = "K2L_EMAC1", + .rx_flow = 8, + .phy_addr = 1, + .slave_port = 2, + .sgmii_link_type = SGMII_LINK_MAC_PHY, + }, + { + .int_name = "K2L_EMAC2", + .rx_flow = 16, + .phy_addr = 2, + .slave_port = 3, + .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, + }, + { + .int_name = "K2L_EMAC3", + .rx_flow = 32, + .phy_addr = 3, + .slave_port = 4, + .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, + }, +}; + +int get_num_eth_ports(void) +{ + return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t); +} +#endif + #ifdef CONFIG_BOARD_EARLY_INIT_F int board_early_init_f(void) { diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c index b552bb8d7e..fd1bd59c6c 100644 --- a/board/tqc/tqma6/tqma6.c +++ b/board/tqc/tqma6/tqma6.c @@ -138,8 +138,10 @@ static iomux_v3_cfg_t const tqma6_ecspi1_pads[] = { NEW_PAD_CTRL(MX6_PAD_EIM_D18__ECSPI1_MOSI, SPI_PAD_CTRL), }; +#define TQMA6_SF_CS_GPIO IMX_GPIO_NR(3, 19) + static unsigned const tqma6_ecspi1_cs[] = { - IMX_GPIO_NR(3, 19), + TQMA6_SF_CS_GPIO, }; static void tqma6_iomuxc_spi(void) @@ -152,6 +154,12 @@ static void tqma6_iomuxc_spi(void) ARRAY_SIZE(tqma6_ecspi1_pads)); } +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return ((bus == CONFIG_SF_DEFAULT_BUS) && + (cs == CONFIG_SF_DEFAULT_CS)) ? TQMA6_SF_CS_GPIO : -1; +} + static struct i2c_pads_info tqma6_i2c3_pads = { /* I2C3: on board LM75, M24C64, */ .scl = { diff --git a/board/tqc/tqma6/tqma6_bb.h b/board/tqc/tqma6/tqma6_bb.h index 9d072d28ad..fb7b4626a1 100644 --- a/board/tqc/tqma6/tqma6_bb.h +++ b/board/tqc/tqma6/tqma6_bb.h @@ -6,7 +6,7 @@ */ #ifndef __TQMA6_BB__ -#define __TQMA6_BB +#define __TQMA6_BB__ #include <common.h> diff --git a/common/bootm.c b/common/bootm.c index 81e32617c3..6b3ea8c61b 100644 --- a/common/bootm.c +++ b/common/bootm.c @@ -167,7 +167,8 @@ static int bootm_find_os(cmd_tbl_t *cmdtp, int flag, int argc, } /* If we have a valid setup.bin, we will use that for entry (x86) */ - if (images.os.arch == IH_ARCH_I386) { + if (images.os.arch == IH_ARCH_I386 || + images.os.arch == IH_ARCH_X86_64) { ulong len; ret = boot_get_setup(&images, IH_ARCH_I386, &images.ep, &len); diff --git a/common/cli_hush.c b/common/cli_hush.c index 2b654b754f..d643912922 100644 --- a/common/cli_hush.c +++ b/common/cli_hush.c @@ -3162,7 +3162,7 @@ static int parse_stream_outer(struct in_str *inp, int flag) o_string temp=NULL_O_STRING; int rcode; #ifdef __U_BOOT__ - int code = 0; + int code = 1; #endif do { ctx.type = flag; @@ -3217,7 +3217,7 @@ static int parse_stream_outer(struct in_str *inp, int flag) } b_free(&temp); /* loop on syntax errors, return on EOF */ - } while (rcode != -1 && !(flag & FLAG_EXIT_FROM_LOOP) && + } while (rcode != 1 && !(flag & FLAG_EXIT_FROM_LOOP) && (inp->peek != static_peek || b_peek(inp))); #ifndef __U_BOOT__ return 0; @@ -3236,8 +3236,10 @@ int parse_string_outer(const char *s, int flag) #ifdef __U_BOOT__ char *p = NULL; int rcode; - if ( !s || !*s) + if (!s) return 1; + if (!*s) + return 0; if (!(p = strchr(s, '\n')) || *++p) { p = xmalloc(strlen(s) + 2); strcpy(p, s); diff --git a/common/cmd_fitupd.c b/common/cmd_fitupd.c index e811473b47..b0459744d9 100644 --- a/common/cmd_fitupd.c +++ b/common/cmd_fitupd.c @@ -1,12 +1,8 @@ -de <net.h> - -#if !defined(CONFIG_UPDATE_TFTP) -#error "CONFIG_UPDATE_TFTP required" -#endif - -static int do_fitupd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - ulong addr = 0Un the root directory of the source tree for details. +/* + * (C) Copyright 2011 + * Andreas Pretzsch, carpe noctem engineering, apr@cn-eng.de + * + * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> diff --git a/common/dlmalloc.c b/common/dlmalloc.c index f9873393c1..d87834df67 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -2181,7 +2181,7 @@ Void_t* mALLOc(bytes) size_t bytes; INTERNAL_SIZE_T nb; #ifdef CONFIG_SYS_MALLOC_F_LEN - if (!(gd->flags & GD_FLG_RELOC)) { + if (gd && !(gd->flags & GD_FLG_RELOC)) { ulong new_ptr; void *ptr; diff --git a/common/image-fdt.c b/common/image-fdt.c index a2342fa3df..a39ae1b4cc 100644 --- a/common/image-fdt.c +++ b/common/image-fdt.c @@ -413,11 +413,11 @@ int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch, } } else { debug("## No Flattened Device Tree\n"); - return 0; + goto error; } } else { debug("## No Flattened Device Tree\n"); - return 0; + goto error; } *of_flat_tree = fdt_blob; diff --git a/common/image-fit.c b/common/image-fit.c index a272ea2e83..4ffc5aaa51 100644 --- a/common/image-fit.c +++ b/common/image-fit.c @@ -1114,7 +1114,8 @@ int fit_image_check_arch(const void *fit, int noffset, uint8_t arch) if (fit_image_get_arch(fit, noffset, &image_arch)) return 0; - return (arch == image_arch); + return (arch == image_arch) || + (arch == IH_ARCH_I386 && image_arch == IH_ARCH_X86_64); } /** diff --git a/common/image.c b/common/image.c index eb92e6323c..b75a5ce29a 100644 --- a/common/image.c +++ b/common/image.c @@ -85,6 +85,7 @@ static const table_entry_t uimage_arch[] = { { IH_ARCH_SANDBOX, "sandbox", "Sandbox", }, { IH_ARCH_ARM64, "arm64", "AArch64", }, { IH_ARCH_ARC, "arc", "ARC", }, + { IH_ARCH_X86_64, "x86_64", "AMD x86_64", }, { -1, "", "", }, }; diff --git a/common/stdio.c b/common/stdio.c index 68c595d2d7..adbfc890dd 100644 --- a/common/stdio.c +++ b/common/stdio.c @@ -197,6 +197,7 @@ int stdio_deregister_dev(struct stdio_dev *dev, int force) } list_del(&(dev->list)); + free(dev); /* reassign Device list */ list_for_each(pos, &(devs.list)) { diff --git a/common/usb.c b/common/usb.c index bd0f8d5d18..7d33a0f086 100644 --- a/common/usb.c +++ b/common/usb.c @@ -927,7 +927,6 @@ int usb_new_device(struct usb_device *dev) * thread_id=5729457&forum_id=5398 */ __maybe_unused struct usb_device_descriptor *desc; - int port = -1; struct usb_device *parent = dev->parent; unsigned short portstatus; @@ -965,24 +964,10 @@ int usb_new_device(struct usb_device *dev) #endif if (parent) { - int j; - - /* find the port number we're at */ - for (j = 0; j < parent->maxchild; j++) { - if (parent->children[j] == dev) { - port = j; - break; - } - } - if (port < 0) { - printf("usb_new_device:cannot locate device's port.\n"); - return 1; - } - /* reset the port for the second time */ - err = hub_port_reset(dev->parent, port, &portstatus); + err = hub_port_reset(dev->parent, dev->portnr - 1, &portstatus); if (err < 0) { - printf("\n Couldn't reset port %i\n", port); + printf("\n Couldn't reset port %i\n", dev->portnr); return 1; } } diff --git a/common/usb_hub.c b/common/usb_hub.c index c416e5e0b3..0f1eab4486 100644 --- a/common/usb_hub.c +++ b/common/usb_hub.c @@ -86,50 +86,11 @@ static void usb_hub_power_on(struct usb_hub_device *hub) int i; struct usb_device *dev; unsigned pgood_delay = hub->desc.bPwrOn2PwrGood * 2; - ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1); - unsigned short portstatus; - int ret; dev = hub->pusb_dev; - /* - * Enable power to the ports: - * Here we Power-cycle the ports: aka, - * turning them off and turning on again. - */ debug("enabling power on all ports\n"); for (i = 0; i < dev->maxchild; i++) { - usb_clear_port_feature(dev, i + 1, USB_PORT_FEAT_POWER); - debug("port %d returns %lX\n", i + 1, dev->status); - } - - /* Wait at least 2*bPwrOn2PwrGood for PP to change */ - mdelay(pgood_delay); - - for (i = 0; i < dev->maxchild; i++) { - ret = usb_get_port_status(dev, i + 1, portsts); - if (ret < 0) { - debug("port %d: get_port_status failed\n", i + 1); - continue; - } - - /* - * Check to confirm the state of Port Power: - * xHCI says "After modifying PP, s/w shall read - * PP and confirm that it has reached the desired state - * before modifying it again, undefined behavior may occur - * if this procedure is not followed". - * EHCI doesn't say anything like this, but no harm in keeping - * this. - */ - portstatus = le16_to_cpu(portsts->wPortStatus); - if (portstatus & (USB_PORT_STAT_POWER << 1)) { - debug("port %d: Port power change failed\n", i + 1); - continue; - } - } - - for (i = 0; i < dev->maxchild; i++) { usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER); debug("port %d returns %lX\n", i + 1, dev->status); } diff --git a/common/usb_kbd.c b/common/usb_kbd.c index fdc083c70c..bc7145ea79 100644 --- a/common/usb_kbd.c +++ b/common/usb_kbd.c @@ -99,6 +99,11 @@ static const unsigned char usb_kbd_arrow[] = { #define USB_KBD_BOOT_REPORT_SIZE 8 struct usb_kbd_pdata { + unsigned long intpipe; + int intpktsize; + int intinterval; + struct int_queue *intq; + uint32_t repeat_delay; uint32_t usb_in_pointer; @@ -116,32 +121,6 @@ extern int __maybe_unused net_busy_flag; /* The period of time between two calls of usb_kbd_testc(). */ static unsigned long __maybe_unused kbd_testc_tms; -/* Generic keyboard event polling. */ -void usb_kbd_generic_poll(void) -{ - struct stdio_dev *dev; - struct usb_device *usb_kbd_dev; - struct usb_kbd_pdata *data; - struct usb_interface *iface; - struct usb_endpoint_descriptor *ep; - int pipe; - int maxp; - - /* Get the pointer to USB Keyboard device pointer */ - dev = stdio_get_by_name(DEVNAME); - usb_kbd_dev = (struct usb_device *)dev->priv; - data = usb_kbd_dev->privptr; - iface = &usb_kbd_dev->config.if_desc[0]; - ep = &iface->ep_desc[0]; - pipe = usb_rcvintpipe(usb_kbd_dev, ep->bEndpointAddress); - - /* Submit a interrupt transfer request */ - maxp = usb_maxpacket(usb_kbd_dev, pipe); - usb_submit_int_msg(usb_kbd_dev, pipe, data->new, - min(maxp, USB_KBD_BOOT_REPORT_SIZE), - ep->bInterval); -} - /* Puts character in the queue and sets up the in and out pointer. */ static void usb_kbd_put_queue(struct usb_kbd_pdata *data, char c) { @@ -331,23 +310,11 @@ static int usb_kbd_irq(struct usb_device *dev) static inline void usb_kbd_poll_for_event(struct usb_device *dev) { #if defined(CONFIG_SYS_USB_EVENT_POLL) - struct usb_interface *iface; - struct usb_endpoint_descriptor *ep; - struct usb_kbd_pdata *data; - int pipe; - int maxp; - - /* Get the pointer to USB Keyboard device pointer */ - data = dev->privptr; - iface = &dev->config.if_desc[0]; - ep = &iface->ep_desc[0]; - pipe = usb_rcvintpipe(dev, ep->bEndpointAddress); + struct usb_kbd_pdata *data = dev->privptr; /* Submit a interrupt transfer request */ - maxp = usb_maxpacket(dev, pipe); - usb_submit_int_msg(dev, pipe, &data->new[0], - min(maxp, USB_KBD_BOOT_REPORT_SIZE), - ep->bInterval); + usb_submit_int_msg(dev, data->intpipe, &data->new[0], data->intpktsize, + data->intinterval); usb_kbd_irq_worker(dev); #elif defined(CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP) @@ -358,6 +325,15 @@ static inline void usb_kbd_poll_for_event(struct usb_device *dev) 1, 0, data->new, USB_KBD_BOOT_REPORT_SIZE); if (memcmp(data->old, data->new, USB_KBD_BOOT_REPORT_SIZE)) usb_kbd_irq_worker(dev); +#elif defined(CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE) + struct usb_kbd_pdata *data = dev->privptr; + if (poll_int_queue(dev, data->intq)) { + usb_kbd_irq_worker(dev); + /* We've consumed all queued int packets, create new */ + destroy_int_queue(dev, data->intq); + data->intq = create_int_queue(dev, data->intpipe, 1, + USB_KBD_BOOT_REPORT_SIZE, data->new); + } #endif } @@ -415,7 +391,6 @@ static int usb_kbd_probe(struct usb_device *dev, unsigned int ifnum) struct usb_interface *iface; struct usb_endpoint_descriptor *ep; struct usb_kbd_pdata *data; - int pipe, maxp; if (dev->descriptor.bNumConfigurations != 1) return 0; @@ -464,8 +439,10 @@ static int usb_kbd_probe(struct usb_device *dev, unsigned int ifnum) /* Set IRQ handler */ dev->irq_handle = usb_kbd_irq; - pipe = usb_rcvintpipe(dev, ep->bEndpointAddress); - maxp = usb_maxpacket(dev, pipe); + data->intpipe = usb_rcvintpipe(dev, ep->bEndpointAddress); + data->intpktsize = min(usb_maxpacket(dev, data->intpipe), + USB_KBD_BOOT_REPORT_SIZE); + data->intinterval = ep->bInterval; /* We found a USB Keyboard, install it. */ usb_set_protocol(dev, iface->desc.bInterfaceNumber, 0); @@ -474,9 +451,14 @@ static int usb_kbd_probe(struct usb_device *dev, unsigned int ifnum) usb_set_idle(dev, iface->desc.bInterfaceNumber, REPEAT_RATE, 0); debug("USB KBD: enable interrupt pipe...\n"); - if (usb_submit_int_msg(dev, pipe, data->new, - min(maxp, USB_KBD_BOOT_REPORT_SIZE), - ep->bInterval) < 0) { +#ifdef CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE + data->intq = create_int_queue(dev, data->intpipe, 1, + USB_KBD_BOOT_REPORT_SIZE, data->new); + if (!data->intq) { +#else + if (usb_submit_int_msg(dev, data->intpipe, data->new, data->intpktsize, + data->intinterval) < 0) { +#endif printf("Failed to get keyboard state from device %04x:%04x\n", dev->descriptor.idVendor, dev->descriptor.idProduct); /* Abort, we don't want to use that non-functional keyboard. */ @@ -550,9 +532,22 @@ int drv_usb_kbd_init(void) int usb_kbd_deregister(int force) { #ifdef CONFIG_SYS_STDIO_DEREGISTER - int ret = stdio_deregister(DEVNAME, force); - if (ret && ret != -ENODEV) - return ret; + struct stdio_dev *dev; + struct usb_device *usb_kbd_dev; + struct usb_kbd_pdata *data; + + dev = stdio_get_by_name(DEVNAME); + if (dev) { + usb_kbd_dev = (struct usb_device *)dev->priv; + data = usb_kbd_dev->privptr; + if (stdio_deregister_dev(dev, force) != 0) + return 1; +#ifdef CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE + destroy_int_queue(usb_kbd_dev, data->intq); +#endif + free(data->new); + free(data); + } return 0; #else diff --git a/common/usb_storage.c b/common/usb_storage.c index eb7706c100..1411737bed 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -1351,8 +1351,11 @@ int usb_stor_get_info(struct usb_device *dev, struct us_data *ss, perq = usb_stor_buf[0]; modi = usb_stor_buf[1]; - if ((perq & 0x1f) == 0x1f) { - /* skip unknown devices */ + /* + * Skip unknown devices (0x1f) and enclosure service devices (0x0d), + * they would not respond to test_unit_ready . + */ + if (((perq & 0x1f) == 0x1f) || ((perq & 0x1f) == 0x0d)) { return 0; } if ((modi&0x80) == 0x80) { diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index f9922936ab..f0cbf21025 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="A10_OLINUXINO_L,AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" CONFIG_FDTFILE="sun4i-a10-olinuxino-lime.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN4I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN4I=y ++S:CONFIG_TARGET_A10_OLINUXINO_L=y diff --git a/configs/A10s-OLinuXino-M_defconfig b/configs/A10s-OLinuXino-M_defconfig index 2aad834fa8..64756755bf 100644 --- a/configs/A10s-OLinuXino-M_defconfig +++ b/configs/A10s-OLinuXino-M_defconfig @@ -1,8 +1,10 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="A10S_OLINUXINO_M,AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)" +CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPB(10)" CONFIG_FDTFILE="sun5i-a10s-olinuxino-micro.dtb" CONFIG_MMC_SUNXI_SLOT_EXTRA=1 +S:CONFIG_MMC0_CD_PIN="PG1" +S:CONFIG_MMC1_CD_PIN="PG13" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN5I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN5I=y ++S:CONFIG_TARGET_A10S_OLINUXINO_M=y diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index 9ae7b12851..d8b12391d8 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="A13_OLINUXINOM,CONS_INDEX=2,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)" +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)" CONFIG_FDTFILE="sun5i-a13-olinuxino-micro.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN5I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN5I=y ++S:CONFIG_TARGET_A13_OLINUXINOM=y diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 2c726f308a..91039dfc96 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="A13_OLINUXINO,CONS_INDEX=2,AXP209_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)" +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,AXP209_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(11)" CONFIG_FDTFILE="sun5i-a13-olinuxino.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN5I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN5I=y ++S:CONFIG_TARGET_A13_OLINUXINO=y diff --git a/configs/A20-OLinuXino-Lime2_defconfig b/configs/A20-OLinuXino-Lime2_defconfig index 75ef872780..f80b98ae90 100644 --- a/configs/A20-OLinuXino-Lime2_defconfig +++ b/configs/A20-OLinuXino-Lime2_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_L2,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-olinuxino-lime2.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_A20_OLINUXINO_L2=y diff --git a/configs/A20-OLinuXino-Lime_defconfig b/configs/A20-OLinuXino-Lime_defconfig index ca79fd58aa..d9e66b7155 100644 --- a/configs/A20-OLinuXino-Lime_defconfig +++ b/configs/A20-OLinuXino-Lime_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_L,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPC(3),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-olinuxino-lime.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_A20_OLINUXINO_L=y diff --git a/configs/A20-OLinuXino_MICRO_defconfig b/configs/A20-OLinuXino_MICRO_defconfig index 0e0a7def2d..1b9668d46d 100644 --- a/configs/A20-OLinuXino_MICRO_defconfig +++ b/configs/A20-OLinuXino_MICRO_defconfig @@ -1,8 +1,10 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="A20_OLINUXINO_M,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-olinuxino-micro.dtb" CONFIG_MMC_SUNXI_SLOT_EXTRA=3 +S:CONFIG_MMC0_CD_PIN="PH1" +S:CONFIG_MMC3_CD_PIN="PH11" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_A20_OLINUXINO_M=y diff --git a/configs/Auxtek-T004_defconfig b/configs/Auxtek-T004_defconfig index ed06f5700c..5b06ea0aea 100644 --- a/configs/Auxtek-T004_defconfig +++ b/configs/Auxtek-T004_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AUXTEK_T004,AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)" +CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)" CONFIG_FDTFILE="sun5i-a10s-auxtek-t004.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN5I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN5I=y ++S:CONFIG_TARGET_AUXTEK_T004=y diff --git a/configs/Bananapi_defconfig b/configs/Bananapi_defconfig index d59cf72eaa..196f6824cb 100644 --- a/configs/Bananapi_defconfig +++ b/configs/Bananapi_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="BANANAPI,AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI" CONFIG_FDTFILE="sun7i-a20-bananapi.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_BANANAPI=y diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig index 16800de2bc..89291f90e9 100644 --- a/configs/Colombus_defconfig +++ b/configs/Colombus_defconfig @@ -1,4 +1,5 @@ -CONFIG_SYS_EXTRA_OPTIONS="COLOMBUS" CONFIG_ARM=y -CONFIG_TARGET_SUN6I=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN6I=y +CONFIG_TARGET_COLOMBUS=y CONFIG_FDTFILE="sun6i-a31-colombus.dtb" diff --git a/configs/Cubieboard2_FEL_defconfig b/configs/Cubieboard2_FEL_defconfig deleted file mode 100644 index 353b04a3b1..0000000000 --- a/configs/Cubieboard2_FEL_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD2,SPL_FEL,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" -CONFIG_FDTFILE="sun7i-a20-cubieboard2.dtb" -+S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y diff --git a/configs/Cubieboard2_defconfig b/configs/Cubieboard2_defconfig index 11a0c5ff37..7e7a1ca398 100644 --- a/configs/Cubieboard2_defconfig +++ b/configs/Cubieboard2_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD2,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-cubieboard2.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_CUBIEBOARD2=y diff --git a/configs/Cubieboard_defconfig b/configs/Cubieboard_defconfig index 8c1ff9584e..0bc45fd2cb 100644 --- a/configs/Cubieboard_defconfig +++ b/configs/Cubieboard_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD,AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI" CONFIG_FDTFILE="sun4i-a10-cubieboard.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN4I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN4I=y ++S:CONFIG_TARGET_CUBIEBOARD=y diff --git a/configs/Cubietruck_FEL_defconfig b/configs/Cubietruck_FEL_defconfig deleted file mode 100644 index 23c5efb18a..0000000000 --- a/configs/Cubietruck_FEL_defconfig +++ /dev/null @@ -1,5 +0,0 @@ -CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CUBIETRUCK,SPL_FEL,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI" -CONFIG_FDTFILE="sun7i-a20-cubietruck.dtb" -+S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index 1389f2138b..b1f9f936fa 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="CUBIETRUCK,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-cubietruck.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_CUBIETRUCK=y diff --git a/configs/Ippo_q8h_defconfig b/configs/Ippo_q8h_defconfig deleted file mode 100644 index 781f13785b..0000000000 --- a/configs/Ippo_q8h_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="IPPO_Q8H_V5,CONS_INDEX=5" -CONFIG_ARM=y -CONFIG_TARGET_SUN8I=y -CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5.dtb" diff --git a/configs/Ippo_q8h_v5_defconfig b/configs/Ippo_q8h_v5_defconfig new file mode 100644 index 0000000000..fc67bd9d56 --- /dev/null +++ b/configs/Ippo_q8h_v5_defconfig @@ -0,0 +1,6 @@ +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I=y +CONFIG_TARGET_IPPO_Q8H_V5=y +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-ippo-q8h-v5.dtb" diff --git a/configs/Linksprite_pcDuino3_defconfig b/configs/Linksprite_pcDuino3_defconfig index efc5301789..a26ff0a70f 100644 --- a/configs/Linksprite_pcDuino3_defconfig +++ b/configs/Linksprite_pcDuino3_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="PCDUINO3,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_PCDUINO3=y diff --git a/configs/Linksprite_pcDuino3_fdt_defconfig b/configs/Linksprite_pcDuino3_fdt_defconfig new file mode 100644 index 0000000000..a33f3a7981 --- /dev/null +++ b/configs/Linksprite_pcDuino3_fdt_defconfig @@ -0,0 +1,11 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" +CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb" +CONFIG_DM=y +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3" +CONFIG_OF_CONTROL=y +CONFIG_OF_SEPARATE=y ++S:CONFIG_ARM=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_PCDUINO3=y diff --git a/configs/Mele_A1000G_defconfig b/configs/Mele_A1000G_defconfig index 06c4cacc53..2f4bf72c93 100644 --- a/configs/Mele_A1000G_defconfig +++ b/configs/Mele_A1000G_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="MELE_A1000G,AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI" CONFIG_FDTFILE="sun4i-a10-a1000.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN4I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN4I=y ++S:CONFIG_TARGET_MELE_A1000G=y diff --git a/configs/Mele_A1000_defconfig b/configs/Mele_A1000_defconfig index d386c79e04..e2912b0afd 100644 --- a/configs/Mele_A1000_defconfig +++ b/configs/Mele_A1000_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="MELE_A1000,AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,MACPWR=SUNXI_GPH(15),AHCI,USB_EHCI" CONFIG_FDTFILE="sun4i-a10-a1000.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN4I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN4I=y ++S:CONFIG_TARGET_MELE_A1000=y diff --git a/configs/Mele_M3_defconfig b/configs/Mele_M3_defconfig index a043ad277d..fe9ba11c39 100644 --- a/configs/Mele_M3_defconfig +++ b/configs/Mele_M3_defconfig @@ -1,7 +1,9 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="MELE_M3,AXP209_POWER,SUNXI_GMAC,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,USB_EHCI" CONFIG_FDTFILE="sun7i-a20-m3.dtb" +S:CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +S:CONFIG_MMC0_CD_PIN="PH1" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_MELE_M3=y diff --git a/configs/Mini-X-1Gb_defconfig b/configs/Mini-X-1Gb_defconfig index 5db4aa3a14..b8fea01245 100644 --- a/configs/Mini-X-1Gb_defconfig +++ b/configs/Mini-X-1Gb_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="MINI_X_1GB,AXP209_POWER,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" CONFIG_FDTFILE="sun4i-a10-mini-xplus.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN4I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN4I=y ++S:CONFIG_TARGET_MINI_X_1GB=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index 6718dcb68c..0f6bbe06b2 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="MINI_X,AXP209_POWER,USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,USB_EHCI" CONFIG_FDTFILE="sun4i-a10-mini-xplus.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN4I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN4I=y ++S:CONFIG_TARGET_MINI_X=y diff --git a/configs/am335x_evm_nor_defconfig b/configs/am335x_evm_nor_defconfig index 41f31cc02e..be901633ac 100644 --- a/configs/am335x_evm_nor_defconfig +++ b/configs/am335x_evm_nor_defconfig @@ -1,5 +1,6 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="NAND,NOR" +CONFIG_SYS_EXTRA_OPTIONS="NAND" CONFIG_CONS_INDEX=1 +S:CONFIG_ARM=y +S:CONFIG_TARGET_AM335X_EVM=y +CONFIG_NOR=y diff --git a/configs/am335x_evm_norboot_defconfig b/configs/am335x_evm_norboot_defconfig index 7dbfa277e0..47ff6cdb16 100644 --- a/configs/am335x_evm_norboot_defconfig +++ b/configs/am335x_evm_norboot_defconfig @@ -1,4 +1,5 @@ -CONFIG_SYS_EXTRA_OPTIONS="NOR,NOR_BOOT" CONFIG_CONS_INDEX=1 CONFIG_ARM=y CONFIG_TARGET_AM335X_EVM=y +CONFIG_NOR=y +CONFIG_NOR_BOOT=y diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index 6f64875b4a..0a1abea0a8 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="BA10_TV_BOX,AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12)" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12)" CONFIG_FDTFILE="sun4i-a10-ba10-tvbox.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN4I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN4I=y ++S:CONFIG_TARGET_BA10_TV_BOX=y diff --git a/configs/cm_t3517_defconfig b/configs/cm_t3517_defconfig new file mode 100644 index 0000000000..4000d2c75d --- /dev/null +++ b/configs/cm_t3517_defconfig @@ -0,0 +1,4 @@ +CONFIG_SPL=n ++S:CONFIG_ARM=y ++S:CONFIG_OMAP34XX=y ++S:CONFIG_TARGET_CM_T3517=y diff --git a/configs/dbau1000_defconfig b/configs/dbau1000_defconfig index 7c95629cfb..aa4d338d43 100644 --- a/configs/dbau1000_defconfig +++ b/configs/dbau1000_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="DBAU1000" CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y +CONFIG_SYS_BIG_ENDIAN=y diff --git a/configs/dbau1100_defconfig b/configs/dbau1100_defconfig index 506f5da8ca..aac9f032b0 100644 --- a/configs/dbau1100_defconfig +++ b/configs/dbau1100_defconfig @@ -1,3 +1,4 @@ -CONFIG_SYS_EXTRA_OPTIONS="DBAU1100" CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_DBAU1100=y diff --git a/configs/dbau1500_defconfig b/configs/dbau1500_defconfig index 5a02a78610..d96de13ff9 100644 --- a/configs/dbau1500_defconfig +++ b/configs/dbau1500_defconfig @@ -1,3 +1,4 @@ -CONFIG_SYS_EXTRA_OPTIONS="DBAU1500" CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_DBAU1500=y diff --git a/configs/dbau1550_defconfig b/configs/dbau1550_defconfig index 9015023524..a2dfe18c78 100644 --- a/configs/dbau1550_defconfig +++ b/configs/dbau1550_defconfig @@ -1,3 +1,4 @@ -CONFIG_SYS_EXTRA_OPTIONS="DBAU1550" CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_DBAU1550=y diff --git a/configs/dbau1550_el_defconfig b/configs/dbau1550_el_defconfig index 53b35ce60f..767326f6d4 100644 --- a/configs/dbau1550_el_defconfig +++ b/configs/dbau1550_el_defconfig @@ -1,3 +1,4 @@ -CONFIG_SYS_EXTRA_OPTIONS="DBAU1550,SYS_LITTLE_ENDIAN" CONFIG_MIPS=y CONFIG_TARGET_DBAU1X00=y +CONFIG_SYS_LITTLE_ENDIAN=y +CONFIG_DBAU1550=y diff --git a/configs/gr_cpci_ax2000_defconfig b/configs/gr_cpci_ax2000_defconfig index 6eb02ad123..b59d07772f 100644 --- a/configs/gr_cpci_ax2000_defconfig +++ b/configs/gr_cpci_ax2000_defconfig @@ -1,2 +1,3 @@ +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SPARC=y CONFIG_TARGET_GR_CPCI_AX2000=y diff --git a/configs/gr_ep2s60_defconfig b/configs/gr_ep2s60_defconfig index 6e1eb83c77..2c69efa605 100644 --- a/configs/gr_ep2s60_defconfig +++ b/configs/gr_ep2s60_defconfig @@ -1,2 +1,3 @@ +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SPARC=y CONFIG_TARGET_GR_EP2S60=y diff --git a/configs/gr_xc3s_1500_defconfig b/configs/gr_xc3s_1500_defconfig index da846db371..fecdd2507c 100644 --- a/configs/gr_xc3s_1500_defconfig +++ b/configs/gr_xc3s_1500_defconfig @@ -1,2 +1,3 @@ +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SPARC=y CONFIG_TARGET_GR_XC3S_1500=y diff --git a/configs/grsim_defconfig b/configs/grsim_defconfig index 2a7e8e7057..e3ffd69f19 100644 --- a/configs/grsim_defconfig +++ b/configs/grsim_defconfig @@ -1,2 +1,3 @@ +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SPARC=y CONFIG_TARGET_GRSIM=y diff --git a/configs/grsim_leon2_defconfig b/configs/grsim_leon2_defconfig index e91eb968fe..6090e34e67 100644 --- a/configs/grsim_leon2_defconfig +++ b/configs/grsim_leon2_defconfig @@ -1,2 +1,3 @@ +CONFIG_SYS_TEXT_BASE=0x00000000 CONFIG_SPARC=y CONFIG_TARGET_GRSIM_LEON2=y diff --git a/configs/i12-tvbox_defconfig b/configs/i12-tvbox_defconfig index 2ef0f91828..5f5037e698 100644 --- a/configs/i12-tvbox_defconfig +++ b/configs/i12-tvbox_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="I12_TVBOX,AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-i12-tvbox.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_I12_TVBOX=y diff --git a/configs/malta_defconfig b/configs/malta_defconfig index f3788b6db1..5a178a76b3 100644 --- a/configs/malta_defconfig +++ b/configs/malta_defconfig @@ -1,3 +1,3 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_BIG_ENDIAN" CONFIG_MIPS=y CONFIG_TARGET_MALTA=y +CONFIG_SYS_BIG_ENDIAN=y diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig index 97d0e899da..011525fc2b 100644 --- a/configs/maltael_defconfig +++ b/configs/maltael_defconfig @@ -1,3 +1,3 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_LITTLE_ENDIAN" CONFIG_MIPS=y CONFIG_TARGET_MALTA=y +CONFIG_SYS_LITTLE_ENDIAN=y diff --git a/configs/novena_defconfig b/configs/novena_defconfig new file mode 100644 index 0000000000..a560afb730 --- /dev/null +++ b/configs/novena_defconfig @@ -0,0 +1,4 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/kosagi/novena/setup.cfg,MX6Q,SPL" ++S:CONFIG_ARM=y ++S:CONFIG_TARGET_KOSAGI_NOVENA=y diff --git a/configs/pb1000_defconfig b/configs/pb1000_defconfig index e226358fe2..72c22a0876 100644 --- a/configs/pb1000_defconfig +++ b/configs/pb1000_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="PB1000" CONFIG_MIPS=y CONFIG_TARGET_PB1X00=y +CONFIG_SYS_LITTLE_ENDIAN=y diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig index e6aba422f8..f54b15fa30 100644 --- a/configs/ph1_ld4_defconfig +++ b/configs/ph1_ld4_defconfig @@ -8,4 +8,7 @@ CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 CONFIG_DM_SERIAL=y CONFIG_UNIPHIER_SERIAL=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y S:CONFIG_SPL_NAND_DENALI=y diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig index 334ec4bbdf..e7957520fb 100644 --- a/configs/ph1_pro4_defconfig +++ b/configs/ph1_pro4_defconfig @@ -8,4 +8,7 @@ CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 CONFIG_DM_SERIAL=y CONFIG_UNIPHIER_SERIAL=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y S:CONFIG_SPL_NAND_DENALI=y diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig index 4e8f354c9b..65109374b7 100644 --- a/configs/ph1_sld8_defconfig +++ b/configs/ph1_sld8_defconfig @@ -8,4 +8,7 @@ CONFIG_SYS_NAND_DENALI_64BIT=y CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8 CONFIG_DM_SERIAL=y CONFIG_UNIPHIER_SERIAL=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y S:CONFIG_SPL_NAND_DENALI=y diff --git a/configs/qemu_mips64_defconfig b/configs/qemu_mips64_defconfig index 2948355769..3608bbe552 100644 --- a/configs/qemu_mips64_defconfig +++ b/configs/qemu_mips64_defconfig @@ -1,3 +1,4 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_BIG_ENDIAN" CONFIG_MIPS=y -CONFIG_TARGET_QEMU_MIPS64=y +CONFIG_TARGET_QEMU_MIPS=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_CPU_MIPS64_R1=y diff --git a/configs/qemu_mips64el_defconfig b/configs/qemu_mips64el_defconfig index 13a039f0b8..a9ebd7b5ff 100644 --- a/configs/qemu_mips64el_defconfig +++ b/configs/qemu_mips64el_defconfig @@ -1,3 +1,4 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_LITTLE_ENDIAN" CONFIG_MIPS=y -CONFIG_TARGET_QEMU_MIPS64=y +CONFIG_TARGET_QEMU_MIPS=y +CONFIG_SYS_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS64_R1=y diff --git a/configs/qemu_mips_defconfig b/configs/qemu_mips_defconfig index 6b2c0290e9..f58dd2200a 100644 --- a/configs/qemu_mips_defconfig +++ b/configs/qemu_mips_defconfig @@ -1,3 +1,4 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_BIG_ENDIAN" CONFIG_MIPS=y CONFIG_TARGET_QEMU_MIPS=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_CPU_MIPS32_R2=y diff --git a/configs/qemu_mipsel_defconfig b/configs/qemu_mipsel_defconfig index 57c87016c4..84a45116fa 100644 --- a/configs/qemu_mipsel_defconfig +++ b/configs/qemu_mipsel_defconfig @@ -1,3 +1,4 @@ -CONFIG_SYS_EXTRA_OPTIONS="SYS_LITTLE_ENDIAN" CONFIG_MIPS=y CONFIG_TARGET_QEMU_MIPS=y +CONFIG_SYS_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32_R2=y diff --git a/configs/qt840a_defconfig b/configs/qt840a_defconfig index a8d4bb8845..70f8159b39 100644 --- a/configs/qt840a_defconfig +++ b/configs/qt840a_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="QT840A,AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI" +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,MACPWR=SUNXI_GPH(21),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-i12-tvbox.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN7I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN7I=y ++S:CONFIG_TARGET_QT840A=y diff --git a/configs/r7-tv-dongle_defconfig b/configs/r7-tv-dongle_defconfig index 6aba94201e..7dbff40b50 100644 --- a/configs/r7-tv-dongle_defconfig +++ b/configs/r7-tv-dongle_defconfig @@ -1,5 +1,7 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="R7DONGLE,AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)" +CONFIG_SYS_EXTRA_OPTIONS="AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)" CONFIG_FDTFILE="sun5i-a10s-r7-tv-dongle.dtb" +S:CONFIG_ARM=y -+S:CONFIG_TARGET_SUN5I=y ++S:CONFIG_ARCH_SUNXI=y ++S:CONFIG_MACH_SUN5I=y ++S:CONFIG_TARGET_R7DONGLE=y diff --git a/configs/vct_platinum_defconfig b/configs/vct_platinum_defconfig index 9ff8b68421..32e9e8cc6d 100644 --- a/configs/vct_platinum_defconfig +++ b/configs/vct_platinum_defconfig @@ -1,3 +1,4 @@ -CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUM" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_VCT_PLATINUM=y diff --git a/configs/vct_platinum_onenand_defconfig b/configs/vct_platinum_onenand_defconfig index f33c97dc8f..4346518a18 100644 --- a/configs/vct_platinum_onenand_defconfig +++ b/configs/vct_platinum_onenand_defconfig @@ -1,3 +1,5 @@ -CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUM,VCT_ONENAND" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_VCT_PLATINUM=y +CONFIG_VCT_ONENAND=y diff --git a/configs/vct_platinum_onenand_small_defconfig b/configs/vct_platinum_onenand_small_defconfig index 58c79955ab..fd52282966 100644 --- a/configs/vct_platinum_onenand_small_defconfig +++ b/configs/vct_platinum_onenand_small_defconfig @@ -1,4 +1,7 @@ -CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUM,VCT_ONENAND,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_VCT_PLATINUM=y +CONFIG_VCT_ONENAND=y +CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_platinum_small_defconfig b/configs/vct_platinum_small_defconfig index f4f56c4f4c..58f956d7db 100644 --- a/configs/vct_platinum_small_defconfig +++ b/configs/vct_platinum_small_defconfig @@ -1,4 +1,6 @@ -CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUM,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_VCT_PLATINUM=y +CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_platinumavc_defconfig b/configs/vct_platinumavc_defconfig index 8aaac56e3d..732565cb96 100644 --- a/configs/vct_platinumavc_defconfig +++ b/configs/vct_platinumavc_defconfig @@ -1,3 +1,4 @@ -CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUMAVC" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_VCT_PLATINUMAVC=y diff --git a/configs/vct_platinumavc_onenand_defconfig b/configs/vct_platinumavc_onenand_defconfig index 926c6e4050..670e7f92da 100644 --- a/configs/vct_platinumavc_onenand_defconfig +++ b/configs/vct_platinumavc_onenand_defconfig @@ -1,3 +1,5 @@ -CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUMAVC,VCT_ONENAND" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_VCT_PLATINUMAVC=y +CONFIG_VCT_ONENAND=y diff --git a/configs/vct_platinumavc_onenand_small_defconfig b/configs/vct_platinumavc_onenand_small_defconfig index 31b4c9a8d6..31a4948e70 100644 --- a/configs/vct_platinumavc_onenand_small_defconfig +++ b/configs/vct_platinumavc_onenand_small_defconfig @@ -1,4 +1,7 @@ -CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUMAVC,VCT_ONENAND,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_VCT_PLATINUMAVC=y +CONFIG_VCT_ONENAND=y +CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_platinumavc_small_defconfig b/configs/vct_platinumavc_small_defconfig index 23f6561b34..ce00a6c0f1 100644 --- a/configs/vct_platinumavc_small_defconfig +++ b/configs/vct_platinumavc_small_defconfig @@ -1,4 +1,6 @@ -CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUMAVC,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_VCT_PLATINUMAVC=y +CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_premium_defconfig b/configs/vct_premium_defconfig index 0e16ff9cac..a19e65d7e6 100644 --- a/configs/vct_premium_defconfig +++ b/configs/vct_premium_defconfig @@ -1,3 +1,4 @@ -CONFIG_SYS_EXTRA_OPTIONS="VCT_PREMIUM" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_VCT_PREMIUM=y diff --git a/configs/vct_premium_onenand_defconfig b/configs/vct_premium_onenand_defconfig index 29734b8274..092d0f79d3 100644 --- a/configs/vct_premium_onenand_defconfig +++ b/configs/vct_premium_onenand_defconfig @@ -1,3 +1,5 @@ -CONFIG_SYS_EXTRA_OPTIONS="VCT_PREMIUM,VCT_ONENAND" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_VCT_PREMIUM=y +CONFIG_VCT_ONENAND=y diff --git a/configs/vct_premium_onenand_small_defconfig b/configs/vct_premium_onenand_small_defconfig index 354793edc8..eabfb88e0c 100644 --- a/configs/vct_premium_onenand_small_defconfig +++ b/configs/vct_premium_onenand_small_defconfig @@ -1,4 +1,7 @@ -CONFIG_SYS_EXTRA_OPTIONS="VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_VCT_PREMIUM=y +CONFIG_VCT_ONENAND=y +CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_premium_small_defconfig b/configs/vct_premium_small_defconfig index a23ddb7e21..1ce0efd273 100644 --- a/configs/vct_premium_small_defconfig +++ b/configs/vct_premium_small_defconfig @@ -1,4 +1,6 @@ -CONFIG_SYS_EXTRA_OPTIONS="VCT_PREMIUM,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +CONFIG_SYS_BIG_ENDIAN=y +CONFIG_VCT_PREMIUM=y +CONFIG_VCT_SMALL_IMAGE=y # CONFIG_CMD_CRC32 is not set diff --git a/doc/README.kwbimage b/doc/README.kwbimage index 13f6f92f68..762b2e3acb 100644 --- a/doc/README.kwbimage +++ b/doc/README.kwbimage @@ -30,10 +30,10 @@ kwbimage support available with mkimage utility will generate kirkwood boot image that can be flashed on the board NAND/SPI flash. The make target which uses mkimage to produce such an image is "u-boot.kwb". For example: - export BUILD_DIR=/tmp/build + export KBUILD_OUTPUT=/tmp/build make distclean make yourboard_config - make $BUILD_DIR/u-boot.kwb + make u-boot.kwb Board specific configuration file specifications: diff --git a/doc/SPI/README.altera_spi b/doc/SPI/README.altera_spi new file mode 100644 index 0000000000..b07449f80d --- /dev/null +++ b/doc/SPI/README.altera_spi @@ -0,0 +1,6 @@ +SoCFPGA EPCS/EPCQx1 mini howto: +- Instantiate EPCS/EPCQx1 Serial flash controller in QSys and rebuild +- The controller base address is the "Base" in QSys + 0x400 +- Set MSEL[4:0]=10010 (AS Standard) +- Load the bitstream into FPGA, enable bridges +- Only then will the driver work diff --git a/doc/mkimage.1 b/doc/mkimage.1 index 14374da88a..b48f70bb3c 100644 --- a/doc/mkimage.1 +++ b/doc/mkimage.1 @@ -115,7 +115,7 @@ FIT image. .TP .BI "\-F" Indicates that an existing FIT image should be modified. No dtc -compilation is performed and the -f flag should not be given. +compilation is performed and the \-f flag should not be given. This can be used to sign images with additional keys after initial image creation. @@ -163,7 +163,8 @@ Create FIT image with compressed kernel and sign it with keys in the skipping those for which keys cannot be found. Also add a comment. .nf .B mkimage -f kernel.its -k /public/signing-keys -K u-boot.dtb \\\\ --c "Kernel 3.8 image for production devices" kernel.itb +.br +.B -c "Kernel 3.8 image for production devices" kernel.itb .fi .P @@ -173,7 +174,8 @@ with keys that are available in the new directory. Images that request signing with unavailable keys are skipped. .nf .B mkimage -F -k /secret/signing-keys -K u-boot.dtb \\\\ --c "Kernel 3.8 image for production devices" kernel.itb +.br +.B -c "Kernel 3.8 image for production devices" kernel.itb .fi .SH HOMEPAGE diff --git a/drivers/dma/keystone_nav.c b/drivers/dma/keystone_nav.c index 77707c2109..dfca75abdc 100644 --- a/drivers/dma/keystone_nav.c +++ b/drivers/dma/keystone_nav.c @@ -81,9 +81,6 @@ void qm_close(void) { u32 j; - if (qm_cfg == NULL) - return; - queue_close(qm_cfg->qpool_num); qm_cfg->mngr_cfg->link_ram_base0 = 0; @@ -105,9 +102,6 @@ void qm_push(struct qm_host_desc *hd, u32 qnum) { u32 regd; - if (!qm_cfg) - return; - cpu_to_bus((u32 *)hd, sizeof(struct qm_host_desc)/4); regd = (u32)hd | ((sizeof(struct qm_host_desc) >> 4) - 1); writel(regd, &qm_cfg->queue[qnum].ptr_size_thresh); @@ -127,9 +121,6 @@ struct qm_host_desc *qm_pop(u32 qnum) { u32 uhd; - if (!qm_cfg) - return NULL; - uhd = readl(&qm_cfg->queue[qnum].ptr_size_thresh) & ~0xf; if (uhd) cpu_to_bus((u32 *)uhd, sizeof(struct qm_host_desc)/4); @@ -139,9 +130,6 @@ struct qm_host_desc *qm_pop(u32 qnum) struct qm_host_desc *qm_pop_from_free_pool(void) { - if (!qm_cfg) - return NULL; - return qm_pop(qm_cfg->qpool_num); } diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c index 0c50a8f332..44135e5bb7 100644 --- a/drivers/gpio/sunxi_gpio.c +++ b/drivers/gpio/sunxi_gpio.c @@ -11,9 +11,25 @@ */ #include <common.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> +#include <malloc.h> #include <asm/io.h> #include <asm/gpio.h> +#include <dm/device-internal.h> +DECLARE_GLOBAL_DATA_PTR; + +#define SUNXI_GPIOS_PER_BANK SUNXI_GPIO_A_NR + +struct sunxi_gpio_platdata { + struct sunxi_gpio *regs; + const char *bank_name; /* Name of bank, e.g. "B" */ + int gpio_count; +}; + +#ifndef CONFIG_DM_GPIO static int sunxi_gpio_output(u32 pin, u32 val) { u32 dat; @@ -100,3 +116,157 @@ int sunxi_name_to_gpio(const char *name) return -1; return group * 32 + pin; } +#endif + +#ifdef CONFIG_DM_GPIO +static int sunxi_gpio_direction_input(struct udevice *dev, unsigned offset) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + + sunxi_gpio_set_cfgbank(plat->regs, offset, SUNXI_GPIO_INPUT); + + return 0; +} + +static int sunxi_gpio_direction_output(struct udevice *dev, unsigned offset, + int value) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + u32 num = GPIO_NUM(offset); + + sunxi_gpio_set_cfgbank(plat->regs, offset, SUNXI_GPIO_OUTPUT); + clrsetbits_le32(&plat->regs->dat, 1 << num, value ? (1 << num) : 0); + + return 0; +} + +static int sunxi_gpio_get_value(struct udevice *dev, unsigned offset) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + u32 num = GPIO_NUM(offset); + unsigned dat; + + dat = readl(&plat->regs->dat); + dat >>= num; + + return dat & 0x1; +} + +static int sunxi_gpio_set_value(struct udevice *dev, unsigned offset, + int value) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + u32 num = GPIO_NUM(offset); + + clrsetbits_le32(&plat->regs->dat, 1 << num, value ? (1 << num) : 0); + return 0; +} + +static int sunxi_gpio_get_function(struct udevice *dev, unsigned offset) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + int func; + + func = sunxi_gpio_get_cfgbank(plat->regs, offset); + if (func == SUNXI_GPIO_OUTPUT) + return GPIOF_OUTPUT; + else if (func == SUNXI_GPIO_INPUT) + return GPIOF_INPUT; + else + return GPIOF_FUNC; +} + +static const struct dm_gpio_ops gpio_sunxi_ops = { + .direction_input = sunxi_gpio_direction_input, + .direction_output = sunxi_gpio_direction_output, + .get_value = sunxi_gpio_get_value, + .set_value = sunxi_gpio_set_value, + .get_function = sunxi_gpio_get_function, +}; + +/** + * Returns the name of a GPIO bank + * + * GPIO banks are named A, B, C, ... + * + * @bank: Bank number (0, 1..n-1) + * @return allocated string containing the name + */ +static char *gpio_bank_name(int bank) +{ + char *name; + + name = malloc(2); + if (name) { + name[0] = 'A' + bank; + name[1] = '\0'; + } + + return name; +} + +static int gpio_sunxi_probe(struct udevice *dev) +{ + struct sunxi_gpio_platdata *plat = dev_get_platdata(dev); + struct gpio_dev_priv *uc_priv = dev->uclass_priv; + + /* Tell the uclass how many GPIOs we have */ + if (plat) { + uc_priv->gpio_count = plat->gpio_count; + uc_priv->bank_name = plat->bank_name; + } + + return 0; +} +/** + * We have a top-level GPIO device with no actual GPIOs. It has a child + * device for each Sunxi bank. + */ +static int gpio_sunxi_bind(struct udevice *parent) +{ + struct sunxi_gpio_platdata *plat = parent->platdata; + struct sunxi_gpio_reg *ctlr; + int bank; + int ret; + + /* If this is a child device, there is nothing to do here */ + if (plat) + return 0; + + ctlr = (struct sunxi_gpio_reg *)fdtdec_get_addr(gd->fdt_blob, + parent->of_offset, "reg"); + for (bank = 0; bank < SUNXI_GPIO_BANKS; bank++) { + struct sunxi_gpio_platdata *plat; + struct udevice *dev; + + plat = calloc(1, sizeof(*plat)); + if (!plat) + return -ENOMEM; + plat->regs = &ctlr->gpio_bank[bank]; + plat->bank_name = gpio_bank_name(bank); + plat->gpio_count = SUNXI_GPIOS_PER_BANK; + + ret = device_bind(parent, parent->driver, + plat->bank_name, plat, -1, &dev); + if (ret) + return ret; + dev->of_offset = parent->of_offset; + } + + return 0; +} + +static const struct udevice_id sunxi_gpio_ids[] = { + { .compatible = "allwinner,sun7i-a20-pinctrl" }, + { } +}; + +U_BOOT_DRIVER(gpio_sunxi) = { + .name = "gpio_sunxi", + .id = UCLASS_GPIO, + .ops = &gpio_sunxi_ops, + .of_match = sunxi_gpio_ids, + .bind = gpio_sunxi_bind, + .probe = gpio_sunxi_probe, +}; +#endif diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 811033b0b8..7bb1702bba 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -38,7 +38,7 @@ * generic value. */ #ifndef CONFIG_I2C_TIMEOUT -#define CONFIG_I2C_TIMEOUT 10000 +#define CONFIG_I2C_TIMEOUT 100000 #endif #define I2C_READ_BIT 1 diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c index 18d6736601..d34b749a56 100644 --- a/drivers/i2c/i2c_core.c +++ b/drivers/i2c/i2c_core.c @@ -229,11 +229,9 @@ static void i2c_init_bus(unsigned int bus_no, int speed, int slaveaddr) } /* implement possible board specific board init */ -static void __def_i2c_init_board(void) +__weak void i2c_init_board(void) { } -void i2c_init_board(void) - __attribute__((weak, alias("__def_i2c_init_board"))); /* * i2c_init_all(): @@ -395,9 +393,7 @@ void i2c_reg_write(uint8_t addr, uint8_t reg, uint8_t val) i2c_write(addr, reg, 1, &val, 1); } -void __i2c_init(int speed, int slaveaddr) +__weak void i2c_init(int speed, int slaveaddr) { i2c_init_bus(i2c_get_bus_num(), speed, slaveaddr); } -void i2c_init(int speed, int slaveaddr) - __attribute__((weak, alias("__i2c_init"))); diff --git a/drivers/i2c/ppc4xx_i2c.c b/drivers/i2c/ppc4xx_i2c.c index e7a15ba644..df8888550b 100644 --- a/drivers/i2c/ppc4xx_i2c.c +++ b/drivers/i2c/ppc4xx_i2c.c @@ -158,8 +158,7 @@ static void ppc4xx_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) * * Typical case is a Write of an addr followd by a Read. The * IBM FAQ does not cover this. On the last byte of the write - * we don't set the creg CHT bit, and on the first bytes of the - * read we set the RPST bit. + * we don't set the creg CHT bit but the RPST bit. * * It does not support address only transfers, there must be * a data part. If you want to write the address yourself, put @@ -247,6 +246,10 @@ static int _i2c_transfer(struct i2c_adapter *adap, if ((!cmd_type && (ptr == addr)) || ((tran + bc) != cnt)) creg |= IIC_CNTL_CHT; + /* last part of address, prepare for repeated start on read */ + if (cmd_type && (ptr == addr) && ((tran + bc) == cnt)) + creg |= IIC_CNTL_RPST; + if (reading) { creg |= IIC_CNTL_READ; } else { @@ -286,6 +289,27 @@ static int _i2c_transfer(struct i2c_adapter *adap, /* Transfer aborted? */ if (status & IIC_EXTSTS_XFRA) result = IIC_NOK_XFRA; + /* Is bus free? + * If error happened during combined xfer + * IIC interface is usually stuck in some strange + * state without a valid stop condition. + * Brute, but working: generate stop, then soft reset. + */ + if ((status & IIC_EXTSTS_BCS_MASK) + != IIC_EXTSTS_BCS_FREE){ + u8 mdcntl = in_8(&i2c->mdcntl); + + /* Generate valid stop condition */ + out_8(&i2c->xtcntlss, IIC_XTCNTLSS_SRST); + out_8(&i2c->directcntl, IIC_DIRCNTL_SCC); + udelay(10); + out_8(&i2c->directcntl, + IIC_DIRCNTL_SCC | IIC_DIRCNTL_SDAC); + out_8(&i2c->xtcntlss, 0); + + ppc4xx_i2c_init(adap, (mdcntl & IIC_MDCNTL_FSM) + ? 400000 : 100000, 0); + } } else if ( status & IIC_STS_PT) { result = IIC_NOK_TOUT; } @@ -314,8 +338,6 @@ static int _i2c_transfer(struct i2c_adapter *adap, cnt = data_len; tran = 0; reading = cmd_type; - if (reading) - creg = IIC_CNTL_RPST; } } return result; diff --git a/drivers/i2c/rcar_i2c.c b/drivers/i2c/rcar_i2c.c index 50cebd622b..90ad116a98 100644 --- a/drivers/i2c/rcar_i2c.c +++ b/drivers/i2c/rcar_i2c.c @@ -119,10 +119,10 @@ rcar_i2c_raw_read(struct rcar_i2c *dev, u8 chip, uint addr) /* set slave address, receive */ writel((chip << 1) | 1, &dev->icmar); - /* clear status */ - writel(0, &dev->icmsr); /* start master receive */ writel(MCR_MDBS | MCR_MIE | MCR_ESG, &dev->icmcr); + /* clear status */ + writel(0, &dev->icmsr); while ((readl(&dev->icmsr) & (MSR_MAT | MSR_MDR)) != (MSR_MAT | MSR_MDR)) diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 464cee16d1..461d7d8ec1 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -5,37 +5,39 @@ # SPDX-License-Identifier: GPL-2.0+ # +obj-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o +obj-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o obj-$(CONFIG_BFIN_SDH) += bfin_sdh.o obj-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o +obj-$(CONFIG_DWMMC) += dw_mmc.o +obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o obj-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o obj-$(CONFIG_FTSDC010) += ftsdc010_mci.o obj-$(CONFIG_FTSDC021) += ftsdc021_sdhci.o obj-$(CONFIG_GENERIC_MMC) += mmc.o obj-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o +obj-$(CONFIG_KONA_SDHCI) += kona_sdhci.o obj-$(CONFIG_MMC_SPI) += mmc_spi.o -obj-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o +obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o obj-$(CONFIG_MV_SDHCI) += mv_sdhci.o +obj-$(CONFIG_MVEBU_MMC) += mvebu_mmc.o obj-$(CONFIG_MXC_MMC) += mxcmmc.o obj-$(CONFIG_MXS_MMC) += mxsmmc.o obj-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o obj-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o -obj-$(CONFIG_SDHCI) += sdhci.o -obj-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o -obj-$(CONFIG_KONA_SDHCI) += kona_sdhci.o +obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o obj-$(CONFIG_S3C_SDI) += s3c_sdi.o obj-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o +obj-$(CONFIG_SDHCI) += sdhci.o obj-$(CONFIG_SH_MMCIF) += sh_mmcif.o +obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o obj-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o -obj-$(CONFIG_DWMMC) += dw_mmc.o -obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o -obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o -obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o -obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o + ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o else obj-$(CONFIG_GENERIC_MMC) += mmc_write.o endif -obj-$(CONFIG_MVEBU_MMC) += mvebu_mmc.o + diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index ef2cbf9e2f..ffb5284a00 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -611,7 +611,8 @@ static int omap_hsmmc_getcd(struct mmc *mmc) if (cd_gpio < 0) return 1; - return gpio_get_value(cd_gpio); + /* NOTE: assumes card detect signal is active-low */ + return !gpio_get_value(cd_gpio); } static int omap_hsmmc_getwp(struct mmc *mmc) @@ -624,6 +625,7 @@ static int omap_hsmmc_getwp(struct mmc *mmc) if (wp_gpio < 0) return 0; + /* NOTE: assumes write protect signal is active-high */ return gpio_get_value(wp_gpio); } #endif diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 16592e3d7c..231f0a0315 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -30,10 +30,22 @@ struct sunxi_mmc_host { /* support 4 mmc hosts */ struct sunxi_mmc_host mmc_host[4]; +static int sunxi_mmc_getcd_gpio(int sdc_no) +{ + switch (sdc_no) { + case 0: return sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN); + case 1: return sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN); + case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN); + case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN); + } + return -1; +} + static int mmc_resource_init(int sdc_no) { struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no]; struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + int cd_pin, ret = 0; debug("init mmc %d resource\n", sdc_no); @@ -60,7 +72,11 @@ static int mmc_resource_init(int sdc_no) } mmchost->mmc_no = sdc_no; - return 0; + cd_pin = sunxi_mmc_getcd_gpio(sdc_no); + if (cd_pin != -1) + ret = gpio_request(cd_pin, "mmc_cd"); + + return ret; } static int mmc_clk_io_on(int sdc_no) @@ -75,7 +91,7 @@ static int mmc_clk_io_on(int sdc_no) /* config ahb clock */ setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no)); -#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I) +#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN8I) /* unassert reset */ setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no)); #endif @@ -351,15 +367,9 @@ out: static int sunxi_mmc_getcd(struct mmc *mmc) { struct sunxi_mmc_host *mmchost = mmc->priv; - int cd_pin = -1; - - switch (mmchost->mmc_no) { - case 0: cd_pin = sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN); break; - case 1: cd_pin = sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN); break; - case 2: cd_pin = sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN); break; - case 3: cd_pin = sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN); break; - } + int cd_pin; + cd_pin = sunxi_mmc_getcd_gpio(mmchost->mmc_no); if (cd_pin == -1) return 1; @@ -385,7 +395,7 @@ struct mmc *sunxi_mmc_init(int sdc_no) cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; cfg->host_caps = MMC_MODE_4BIT; cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS; -#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN7I) || defined(CONFIG_SUN8I) +#if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || defined(CONFIG_MACH_SUN8I) cfg->host_caps |= MMC_MODE_HC; #endif cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; @@ -393,7 +403,9 @@ struct mmc *sunxi_mmc_init(int sdc_no) cfg->f_min = 400000; cfg->f_max = 52000000; - mmc_resource_init(sdc_no); + if (mmc_resource_init(sdc_no) != 0) + return NULL; + mmc_clk_io_on(sdc_no); return mmc_create(cfg, &mmc_host[sdc_no]); diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c index 036c113ad3..7a064ab1bf 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/mxs_nand.c @@ -146,8 +146,13 @@ static uint32_t mxs_nand_aux_status_offset(void) static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size, uint32_t page_oob_size) { - if (page_data_size == 2048) - return 8; + if (page_data_size == 2048) { + if (page_oob_size == 64) + return 8; + + if (page_oob_size == 112) + return 14; + } if (page_data_size == 4096) { if (page_oob_size == 128) diff --git a/drivers/net/keystone_net.c b/drivers/net/keystone_net.c index c8681d0223..bedab1d606 100644 --- a/drivers/net/keystone_net.c +++ b/drivers/net/keystone_net.c @@ -315,7 +315,7 @@ int mac_sl_config(u_int16_t port, struct mac_sl_cfg *cfg) writel(cfg->max_rx_len, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN); writel(cfg->ctl, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL); -#ifdef CONFIG_K2E_EVM +#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L) /* Map RX packet flow priority to 0 */ writel(0, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RX_PRI_MAP); #endif @@ -400,6 +400,9 @@ static int keystone2_eth_open(struct eth_device *dev, bd_t *bis) keystone2_net_serdes_setup(); + if (sys_has_mdio) + keystone2_mdio_reset(mdio_bus); + keystone_sgmii_config(phy_dev, eth_priv->slave_port - 1, eth_priv->sgmii_link_type); @@ -582,7 +585,7 @@ static void keystone2_net_serdes_setup(void) &ks2_serdes_sgmii_156p25mhz, CONFIG_KSNET_SERDES_LANES_PER_SGMII); -#ifdef CONFIG_SOC_K2E +#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L) ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII2_BASE, &ks2_serdes_sgmii_156p25mhz, CONFIG_KSNET_SERDES_LANES_PER_SGMII); diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index d2ecadc890..9437c3bbcc 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -276,6 +276,57 @@ static int m88e1111s_config(struct phy_device *phydev) return 0; } +/** + * m88e1518_phy_writebits - write bits to a register + */ +void m88e1518_phy_writebits(struct phy_device *phydev, + u8 reg_num, u16 offset, u16 len, u16 data) +{ + u16 reg, mask; + + if ((len + offset) >= 16) + mask = 0 - (1 << offset); + else + mask = (1 << (len + offset)) - (1 << offset); + + reg = phy_read(phydev, MDIO_DEVAD_NONE, reg_num); + + reg &= ~mask; + reg |= data << offset; + + phy_write(phydev, MDIO_DEVAD_NONE, reg_num, reg); +} + +static int m88e1518_config(struct phy_device *phydev) +{ + /* + * As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512 + * /88E1514 Rev A0, Errata Section 3.1 + */ + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { + phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x00ff); /* page 0xff */ + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x214B); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2144); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x0C28); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2146); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xB233); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x214D); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xCC0C); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2159); + phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x0000); /* reg page 0 */ + phy_write(phydev, MDIO_DEVAD_NONE, 22, 18); /* reg page 18 */ + /* Write HWCFG_MODE = SGMII to Copper */ + m88e1518_phy_writebits(phydev, 20, 0, 3, 1); + + /* Phy reset */ + m88e1518_phy_writebits(phydev, 20, 15, 1, 1); + phy_write(phydev, MDIO_DEVAD_NONE, 22, 0); /* reg page 18 */ + udelay(100); + } + + return m88e1111s_config(phydev); +} + /* Marvell 88E1118 */ static int m88e1118_config(struct phy_device *phydev) { @@ -493,7 +544,7 @@ static struct phy_driver M88E1518_driver = { .uid = 0x1410dd1, .mask = 0xffffff0, .features = PHY_GBIT_FEATURES, - .config = &m88e1111s_config, + .config = &m88e1518_config, .startup = &m88e1011s_startup, .shutdown = &genphy_shutdown, }; diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 451c33e1a1..4bf493ed45 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -2,9 +2,9 @@ * sh_eth.c - Driver for Renesas ethernet controler. * * Copyright (C) 2008, 2011 Renesas Solutions Corp. - * Copyright (c) 2008, 2011 Nobuhiro Iwamatsu + * Copyright (c) 2008, 2011, 2014 2014 Nobuhiro Iwamatsu * Copyright (c) 2007 Carlos Munoz <carlos@kenati.com> - * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013, 2014 Renesas Electronics Corporation * * SPDX-License-Identifier: GPL-2.0+ */ @@ -83,6 +83,8 @@ int sh_eth_send(struct eth_device *dev, void *packet, int len) else port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP; + flush_cache_wback(port_info->tx_desc_cur, sizeof(struct tx_desc_s)); + /* Restart the transmitter if disabled */ if (!(sh_eth_read(eth, EDTRR) & EDTRR_TRNS)) sh_eth_write(eth, EDTRR_TRNS, EDTRR); @@ -133,6 +135,10 @@ int sh_eth_recv(struct eth_device *dev) port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE; else port_info->rx_desc_cur->rd0 = RD_RACT; + + flush_cache_wback(port_info->rx_desc_cur, + sizeof(struct rx_desc_s)); + /* Point to the next descriptor */ port_info->rx_desc_cur++; if (port_info->rx_desc_cur >= @@ -181,27 +187,27 @@ static int sh_eth_reset(struct sh_eth_dev *eth) static int sh_eth_tx_desc_init(struct sh_eth_dev *eth) { int port = eth->port, i, ret = 0; - u32 tmp_addr; + u32 alloc_desc_size = NUM_TX_DESC * sizeof(struct tx_desc_s); struct sh_eth_info *port_info = ð->port_info[port]; struct tx_desc_s *cur_tx_desc; /* - * Allocate tx descriptors. They must be TX_DESC_SIZE bytes aligned + * Allocate rx descriptors. They must be aligned to size of struct + * tx_desc_s. */ - port_info->tx_desc_malloc = malloc(NUM_TX_DESC * - sizeof(struct tx_desc_s) + - TX_DESC_SIZE - 1); - if (!port_info->tx_desc_malloc) { - printf(SHETHER_NAME ": malloc failed\n"); + port_info->tx_desc_alloc = + memalign(sizeof(struct tx_desc_s), alloc_desc_size); + if (!port_info->tx_desc_alloc) { + printf(SHETHER_NAME ": memalign failed\n"); ret = -ENOMEM; goto err; } - tmp_addr = (u32) (((int)port_info->tx_desc_malloc + TX_DESC_SIZE - 1) & - ~(TX_DESC_SIZE - 1)); - flush_cache_wback(tmp_addr, NUM_TX_DESC * sizeof(struct tx_desc_s)); + flush_cache_wback((u32)port_info->tx_desc_alloc, alloc_desc_size); + /* Make sure we use a P2 address (non-cacheable) */ - port_info->tx_desc_base = (struct tx_desc_s *)ADDR_TO_P2(tmp_addr); + port_info->tx_desc_base = + (struct tx_desc_s *)ADDR_TO_P2((u32)port_info->tx_desc_alloc); port_info->tx_desc_cur = port_info->tx_desc_base; /* Initialize all descriptors */ @@ -232,47 +238,44 @@ err: static int sh_eth_rx_desc_init(struct sh_eth_dev *eth) { int port = eth->port, i , ret = 0; + u32 alloc_desc_size = NUM_RX_DESC * sizeof(struct rx_desc_s); struct sh_eth_info *port_info = ð->port_info[port]; struct rx_desc_s *cur_rx_desc; - u32 tmp_addr; u8 *rx_buf; /* - * Allocate rx descriptors. They must be RX_DESC_SIZE bytes aligned + * Allocate rx descriptors. They must be aligned to size of struct + * rx_desc_s. */ - port_info->rx_desc_malloc = malloc(NUM_RX_DESC * - sizeof(struct rx_desc_s) + - RX_DESC_SIZE - 1); - if (!port_info->rx_desc_malloc) { - printf(SHETHER_NAME ": malloc failed\n"); + port_info->rx_desc_alloc = + memalign(sizeof(struct rx_desc_s), alloc_desc_size); + if (!port_info->rx_desc_alloc) { + printf(SHETHER_NAME ": memalign failed\n"); ret = -ENOMEM; goto err; } - tmp_addr = (u32) (((int)port_info->rx_desc_malloc + RX_DESC_SIZE - 1) & - ~(RX_DESC_SIZE - 1)); - flush_cache_wback(tmp_addr, NUM_RX_DESC * sizeof(struct rx_desc_s)); + flush_cache_wback(port_info->rx_desc_alloc, alloc_desc_size); + /* Make sure we use a P2 address (non-cacheable) */ - port_info->rx_desc_base = (struct rx_desc_s *)ADDR_TO_P2(tmp_addr); + port_info->rx_desc_base = + (struct rx_desc_s *)ADDR_TO_P2((u32)port_info->rx_desc_alloc); port_info->rx_desc_cur = port_info->rx_desc_base; /* - * Allocate rx data buffers. They must be 32 bytes aligned and in - * P2 area + * Allocate rx data buffers. They must be RX_BUF_ALIGNE_SIZE bytes + * aligned and in P2 area. */ - port_info->rx_buf_malloc = malloc( - NUM_RX_DESC * MAX_BUF_SIZE + RX_BUF_ALIGNE_SIZE - 1); - if (!port_info->rx_buf_malloc) { - printf(SHETHER_NAME ": malloc failed\n"); + port_info->rx_buf_alloc = + memalign(RX_BUF_ALIGNE_SIZE, NUM_RX_DESC * MAX_BUF_SIZE); + if (!port_info->rx_buf_alloc) { + printf(SHETHER_NAME ": alloc failed\n"); ret = -ENOMEM; - goto err_buf_malloc; + goto err_buf_alloc; } - tmp_addr = (u32)(((int)port_info->rx_buf_malloc - + (RX_BUF_ALIGNE_SIZE - 1)) & - ~(RX_BUF_ALIGNE_SIZE - 1)); - port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr); + port_info->rx_buf_base = (u8 *)ADDR_TO_P2((u32)port_info->rx_buf_alloc); /* Initialize all descriptors */ for (cur_rx_desc = port_info->rx_desc_base, @@ -297,9 +300,9 @@ static int sh_eth_rx_desc_init(struct sh_eth_dev *eth) return ret; -err_buf_malloc: - free(port_info->rx_desc_malloc); - port_info->rx_desc_malloc = NULL; +err_buf_alloc: + free(port_info->rx_desc_alloc); + port_info->rx_desc_alloc = NULL; err: return ret; @@ -310,9 +313,9 @@ static void sh_eth_tx_desc_free(struct sh_eth_dev *eth) int port = eth->port; struct sh_eth_info *port_info = ð->port_info[port]; - if (port_info->tx_desc_malloc) { - free(port_info->tx_desc_malloc); - port_info->tx_desc_malloc = NULL; + if (port_info->tx_desc_alloc) { + free(port_info->tx_desc_alloc); + port_info->tx_desc_alloc = NULL; } } @@ -321,14 +324,14 @@ static void sh_eth_rx_desc_free(struct sh_eth_dev *eth) int port = eth->port; struct sh_eth_info *port_info = ð->port_info[port]; - if (port_info->rx_desc_malloc) { - free(port_info->rx_desc_malloc); - port_info->rx_desc_malloc = NULL; + if (port_info->rx_desc_alloc) { + free(port_info->rx_desc_alloc); + port_info->rx_desc_alloc = NULL; } - if (port_info->rx_buf_malloc) { - free(port_info->rx_buf_malloc); - port_info->rx_buf_malloc = NULL; + if (port_info->rx_buf_alloc) { + free(port_info->rx_buf_alloc); + port_info->rx_buf_alloc = NULL; } } @@ -414,7 +417,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) #if defined(CONFIG_CPU_SH7734) || defined(CONFIG_R8A7740) sh_eth_write(eth, CONFIG_SH_ETHER_SH7734_MII, RMII_MII); #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ - defined(CONFIG_R8A7794) + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) sh_eth_write(eth, sh_eth_read(eth, RMIIMR) | 0x1, RMIIMR); #endif /* Configure phy */ @@ -440,7 +443,8 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) #elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752) sh_eth_write(eth, 1, RTRATE); #elif defined(CONFIG_CPU_SH7724) || defined(CONFIG_R8A7790) || \ - defined(CONFIG_R8A7791) || defined(CONFIG_R8A7794) + defined(CONFIG_R8A7791) || defined(CONFIG_R8A7793) || \ + defined(CONFIG_R8A7794) val = ECMR_RTM; #endif } else if (phy->speed == 10) { diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h index e325a39aac..5cb520c63e 100644 --- a/drivers/net/sh_eth.h +++ b/drivers/net/sh_eth.h @@ -51,8 +51,6 @@ /* The size of the tx descriptor is determined by how much padding is used. 4, 20, or 52 bytes of padding can be used */ #define TX_DESC_PADDING (CONFIG_SH_ETHER_ALIGNE_SIZE - 12) -/* same as CONFIG_SH_ETHER_ALIGNE_SIZE */ -#define TX_DESC_SIZE (12 + TX_DESC_PADDING) /* Tx descriptor. We always use 3 bytes of padding */ struct tx_desc_s { @@ -68,8 +66,6 @@ struct tx_desc_s { /* The size of the rx descriptor is determined by how much padding is used. 4, 20, or 52 bytes of padding can be used */ #define RX_DESC_PADDING (CONFIG_SH_ETHER_ALIGNE_SIZE - 12) -/* same as CONFIG_SH_ETHER_ALIGNE_SIZE */ -#define RX_DESC_SIZE (12 + RX_DESC_PADDING) /* aligned cache line size */ #define RX_BUF_ALIGNE_SIZE (CONFIG_SH_ETHER_ALIGNE_SIZE > 32 ? 64 : 32) @@ -82,13 +78,13 @@ struct rx_desc_s { }; struct sh_eth_info { - struct tx_desc_s *tx_desc_malloc; + struct tx_desc_s *tx_desc_alloc; struct tx_desc_s *tx_desc_base; struct tx_desc_s *tx_desc_cur; - struct rx_desc_s *rx_desc_malloc; + struct rx_desc_s *rx_desc_alloc; struct rx_desc_s *rx_desc_base; struct rx_desc_s *rx_desc_cur; - u8 *rx_buf_malloc; + u8 *rx_buf_alloc; u8 *rx_buf_base; u8 mac_addr[6]; u8 phy_addr; @@ -359,7 +355,7 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = { #define SH_ETH_TYPE_GETHER #define BASE_IO_ADDR 0xE9A00000 #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ - defined(CONFIG_R8A7794) + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) #define SH_ETH_TYPE_ETHER #define BASE_IO_ADDR 0xEE700200 #elif defined(CONFIG_R7S72100) @@ -571,7 +567,7 @@ enum FELIC_MODE_BIT { #ifdef CONFIG_CPU_SH7724 ECMR_RTM = 0x00000010, #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ - defined(CONFIG_R8A7794) + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) ECMR_RTM = 0x00000004, #endif diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index b097c1a56f..5959672370 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -187,6 +187,7 @@ static int smc911x_send(struct eth_device *dev, void *packet, int length) static void smc911x_halt(struct eth_device *dev) { smc911x_reset(dev); + smc911x_handle_mac_address(dev); } static int smc911x_rx(struct eth_device *dev) diff --git a/drivers/net/uli526x.c b/drivers/net/uli526x.c index 538f11e3eb..9526faa4af 100644 --- a/drivers/net/uli526x.c +++ b/drivers/net/uli526x.c @@ -548,7 +548,7 @@ static int uli526x_rx_packet(struct eth_device *dev) rdes0 = le32_to_cpu(rxptr->rdes0); #ifdef RX_DEBUG - printf("%s(): rxptr->rdes0=%x:%x\n", __FUNCTION__, rxptr->rdes0); + printf("%s(): rxptr->rdes0=%x\n", __FUNCTION__, rxptr->rdes0); #endif if (!(rdes0 & 0x80000000)) { /* packet owner check */ if ((rdes0 & 0x300) != 0x300) { diff --git a/drivers/power/power_spi.c b/drivers/power/power_spi.c index fb455a0061..1e554461f3 100644 --- a/drivers/power/power_spi.c +++ b/drivers/power/power_spi.c @@ -17,27 +17,14 @@ static struct spi_slave *slave; -void pmic_spi_free(struct spi_slave *slave) -{ - if (slave) - spi_free_slave(slave); -} - -struct spi_slave *pmic_spi_probe(struct pmic *p) -{ - return spi_setup_slave(p->bus, - p->hw.spi.cs, - p->hw.spi.clk, - p->hw.spi.mode); -} - static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write) { u32 pmic_tx, pmic_rx; u32 tmp; if (!slave) { - slave = pmic_spi_probe(p); + slave = spi_setup_slave(p->bus, p->hw.spi.cs, p->hw.spi.clk, + p->hw.spi.mode); if (!slave) return -1; @@ -54,25 +41,25 @@ static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write) tmp = cpu_to_be32(pmic_tx); if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx, - pmic_spi_flags)) { - spi_release_bus(slave); - return -1; - } + pmic_spi_flags)) + goto err; if (write) { pmic_tx = p->hw.spi.prepare_tx(reg, val, 0); tmp = cpu_to_be32(pmic_tx); if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx, - pmic_spi_flags)) { - spi_release_bus(slave); - return -1; - } + pmic_spi_flags)) + goto err; } spi_release_bus(slave); *val = cpu_to_be32(pmic_rx); return 0; + +err: + spi_release_bus(slave); + return -1; } int pmic_reg_write(struct pmic *p, u32 reg, u32 val) diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c index 3e50310464..e578ae6342 100644 --- a/drivers/power/twl4030.c +++ b/drivers/power/twl4030.c @@ -98,4 +98,10 @@ void twl4030_power_mmc_init(void) TWL4030_PM_RECEIVER_VMMC1_VSEL_32, TWL4030_PM_RECEIVER_VMMC1_DEV_GRP, TWL4030_PM_RECEIVER_DEV_GRP_P1); + + /* Set VMMC2 to 3.15 Volts */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED, + TWL4030_PM_RECEIVER_VMMC2_VSEL_32, + TWL4030_PM_RECEIVER_VMMC2_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); } diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 2c19ebc288..8c84942761 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_ALTERA_UART) += altera_uart.o obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o obj-$(CONFIG_ARM_DCC) += arm_dcc.o obj-$(CONFIG_ATMEL_USART) += atmel_usart.o +obj-$(CONFIG_DW_SERIAL) += serial_dw.o obj-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o obj-$(CONFIG_MCFUART) += mcfuart.o obj-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 18e41b2302..95c992a5a3 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -109,54 +109,54 @@ U_BOOT_ENV_CALLBACK(baudrate, on_baudrate); void name(void) \ __attribute__((weak, alias("serial_null"))); -serial_initfunc(mpc8xx_serial_initialize); -serial_initfunc(ns16550_serial_initialize); -serial_initfunc(pxa_serial_initialize); -serial_initfunc(s3c24xx_serial_initialize); -serial_initfunc(s5p_serial_initialize); -serial_initfunc(zynq_serial_initialize); -serial_initfunc(bfin_serial_initialize); -serial_initfunc(bfin_jtag_initialize); -serial_initfunc(mpc512x_serial_initialize); -serial_initfunc(uartlite_serial_initialize); -serial_initfunc(au1x00_serial_initialize); -serial_initfunc(asc_serial_initialize); -serial_initfunc(jz_serial_initialize); -serial_initfunc(mpc5xx_serial_initialize); -serial_initfunc(mpc8260_scc_serial_initialize); -serial_initfunc(mpc8260_smc_serial_initialize); -serial_initfunc(mpc85xx_serial_initialize); -serial_initfunc(iop480_serial_initialize); -serial_initfunc(leon2_serial_initialize); -serial_initfunc(leon3_serial_initialize); -serial_initfunc(marvell_serial_initialize); +serial_initfunc(altera_jtag_serial_initialize); +serial_initfunc(altera_serial_initialize); serial_initfunc(amirix_serial_initialize); +serial_initfunc(arc_serial_initialize); +serial_initfunc(arm_dcc_initialize); +serial_initfunc(asc_serial_initialize); +serial_initfunc(atmel_serial_initialize); +serial_initfunc(au1x00_serial_initialize); +serial_initfunc(bfin_jtag_initialize); +serial_initfunc(bfin_serial_initialize); serial_initfunc(bmw_serial_initialize); +serial_initfunc(clps7111_serial_initialize); serial_initfunc(cogent_serial_initialize); serial_initfunc(cpci750_serial_initialize); serial_initfunc(evb64260_serial_initialize); -serial_initfunc(ml2_serial_initialize); -serial_initfunc(sconsole_serial_initialize); -serial_initfunc(p3mx_serial_initialize); -serial_initfunc(altera_jtag_serial_initialize); -serial_initfunc(altera_serial_initialize); -serial_initfunc(atmel_serial_initialize); -serial_initfunc(lpc32xx_serial_initialize); -serial_initfunc(mcf_serial_initialize); -serial_initfunc(oc_serial_initialize); -serial_initfunc(sandbox_serial_initialize); -serial_initfunc(clps7111_serial_initialize); serial_initfunc(imx_serial_initialize); +serial_initfunc(iop480_serial_initialize); +serial_initfunc(jz_serial_initialize); serial_initfunc(ks8695_serial_initialize); +serial_initfunc(leon2_serial_initialize); +serial_initfunc(leon3_serial_initialize); serial_initfunc(lh7a40x_serial_initialize); +serial_initfunc(lpc32xx_serial_initialize); +serial_initfunc(marvell_serial_initialize); serial_initfunc(max3100_serial_initialize); +serial_initfunc(mcf_serial_initialize); +serial_initfunc(ml2_serial_initialize); +serial_initfunc(mpc512x_serial_initialize); +serial_initfunc(mpc5xx_serial_initialize); +serial_initfunc(mpc8260_scc_serial_initialize); +serial_initfunc(mpc8260_smc_serial_initialize); +serial_initfunc(mpc85xx_serial_initialize); +serial_initfunc(mpc8xx_serial_initialize); serial_initfunc(mxc_serial_initialize); +serial_initfunc(mxs_auart_initialize); +serial_initfunc(ns16550_serial_initialize); +serial_initfunc(oc_serial_initialize); +serial_initfunc(p3mx_serial_initialize); serial_initfunc(pl01x_serial_initialize); +serial_initfunc(pxa_serial_initialize); +serial_initfunc(s3c24xx_serial_initialize); +serial_initfunc(s5p_serial_initialize); serial_initfunc(sa1100_serial_initialize); +serial_initfunc(sandbox_serial_initialize); +serial_initfunc(sconsole_serial_initialize); serial_initfunc(sh_serial_initialize); -serial_initfunc(arm_dcc_initialize); -serial_initfunc(mxs_auart_initialize); -serial_initfunc(arc_serial_initialize); +serial_initfunc(uartlite_serial_initialize); +serial_initfunc(zynq_serial_initialize); /** * serial_register() - Register serial driver with serial driver core @@ -202,54 +202,54 @@ void serial_register(struct serial_device *dev) */ void serial_initialize(void) { - mpc8xx_serial_initialize(); - ns16550_serial_initialize(); - pxa_serial_initialize(); - s3c24xx_serial_initialize(); - s5p_serial_initialize(); - mpc512x_serial_initialize(); - bfin_serial_initialize(); - bfin_jtag_initialize(); - uartlite_serial_initialize(); - zynq_serial_initialize(); - au1x00_serial_initialize(); - asc_serial_initialize(); - jz_serial_initialize(); - mpc5xx_serial_initialize(); - mpc8260_scc_serial_initialize(); - mpc8260_smc_serial_initialize(); - mpc85xx_serial_initialize(); - iop480_serial_initialize(); - leon2_serial_initialize(); - leon3_serial_initialize(); - marvell_serial_initialize(); + altera_jtag_serial_initialize(); + altera_serial_initialize(); amirix_serial_initialize(); + arc_serial_initialize(); + arm_dcc_initialize(); + asc_serial_initialize(); + atmel_serial_initialize(); + au1x00_serial_initialize(); + bfin_jtag_initialize(); + bfin_serial_initialize(); bmw_serial_initialize(); + clps7111_serial_initialize(); cogent_serial_initialize(); cpci750_serial_initialize(); evb64260_serial_initialize(); - ml2_serial_initialize(); - sconsole_serial_initialize(); - p3mx_serial_initialize(); - altera_jtag_serial_initialize(); - altera_serial_initialize(); - atmel_serial_initialize(); - lpc32xx_serial_initialize(); - mcf_serial_initialize(); - oc_serial_initialize(); - sandbox_serial_initialize(); - clps7111_serial_initialize(); imx_serial_initialize(); + iop480_serial_initialize(); + jz_serial_initialize(); ks8695_serial_initialize(); + leon2_serial_initialize(); + leon3_serial_initialize(); lh7a40x_serial_initialize(); + lpc32xx_serial_initialize(); + marvell_serial_initialize(); max3100_serial_initialize(); + mcf_serial_initialize(); + ml2_serial_initialize(); + mpc512x_serial_initialize(); + mpc5xx_serial_initialize(); + mpc8260_scc_serial_initialize(); + mpc8260_smc_serial_initialize(); + mpc85xx_serial_initialize(); + mpc8xx_serial_initialize(); mxc_serial_initialize(); + mxs_auart_initialize(); + ns16550_serial_initialize(); + oc_serial_initialize(); + p3mx_serial_initialize(); pl01x_serial_initialize(); + pxa_serial_initialize(); + s3c24xx_serial_initialize(); + s5p_serial_initialize(); sa1100_serial_initialize(); + sandbox_serial_initialize(); + sconsole_serial_initialize(); sh_serial_initialize(); - arm_dcc_initialize(); - mxs_auart_initialize(); - arc_serial_initialize(); + uartlite_serial_initialize(); + zynq_serial_initialize(); serial_assign(default_serial_console()->name); } diff --git a/drivers/serial/serial_dw.c b/drivers/serial/serial_dw.c new file mode 100644 index 0000000000..a348f2956a --- /dev/null +++ b/drivers/serial/serial_dw.c @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2014 Google, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dm.h> +#include <ns16550.h> +#include <serial.h> + +static const struct udevice_id dw_serial_ids[] = { + { .compatible = "snps,dw-apb-uart" }, + { } +}; + +static int dw_serial_ofdata_to_platdata(struct udevice *dev) +{ + struct ns16550_platdata *plat = dev_get_platdata(dev); + int ret; + + ret = ns16550_serial_ofdata_to_platdata(dev); + if (ret) + return ret; + plat->clock = CONFIG_SYS_NS16550_CLK; + + return 0; +} + +U_BOOT_DRIVER(serial_ns16550) = { + .name = "serial_dw", + .id = UCLASS_SERIAL, + .of_match = dw_serial_ids, + .ofdata_to_platdata = dw_serial_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), + .priv_auto_alloc_size = sizeof(struct NS16550), + .probe = ns16550_serial_probe, + .ops = &ns16550_serial_ops, +}; diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h index fe8cde4ded..53406e5855 100644 --- a/drivers/serial/serial_sh.h +++ b/drivers/serial/serial_sh.h @@ -227,7 +227,7 @@ struct uart_port { # define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ - defined(CONFIG_R8A7794) + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) # define SCIF_ORER 0x0001 # define SCSCR_INIT(port) 0x32 /* TIE=0,RIE=0,TE=1,RE=1,REIE=0, */ #else @@ -304,7 +304,8 @@ struct uart_port { /* SH7763 SCIF2 support */ # define SCIF2_RFDC_MASK 0x001f # define SCIF2_TXROOM_MAX 16 -#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) +#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) # define SCIF_ERRORS (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) # define SCIF_RFDC_MASK 0x003f #else @@ -589,7 +590,7 @@ SCIF_FNS(SCSPTR, 0, 0, 0, 0) SCIF_FNS(SCSPTR, 0, 0, 0x20, 16) #endif #if defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ - defined(CONFIG_R8A7794) + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) SCIF_FNS(DL, 0, 0, 0x30, 16) SCIF_FNS(CKS, 0, 0, 0x34, 16) #endif @@ -734,7 +735,8 @@ static inline int scbrr_calc(struct uart_port port, int bps, int clk) #define SCBRR_VALUE(bps, clk) scbrr_calc(sh_sci, bps, clk) #elif defined(__H8300H__) || defined(__H8300S__) #define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1) -#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) +#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \ + defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794) #define DL_VALUE(bps, clk) (clk / bps / 16) /* External Clock */ #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1) /* Internal Clock */ #else /* Generic SH */ diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c index 9114b3ed60..6046efb51f 100644 --- a/drivers/serial/serial_uniphier.c +++ b/drivers/serial/serial_uniphier.c @@ -5,7 +5,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include <common.h> +#include <linux/serial_reg.h> #include <asm/io.h> #include <asm/errno.h> #include <dm/device.h> @@ -37,17 +37,6 @@ struct uniphier_serial { #define thr rbr -/* - * These are the definitions for the Line Control Register - */ -#define UART_LCR_WLS_8 0x03 /* 8 bit character length */ - -/* - * These are the definitions for the Line Status Register - */ -#define UART_LSR_DR 0x01 /* Data ready */ -#define UART_LSR_THRE 0x20 /* Xmit holding register empty */ - struct uniphier_serial_private_data { struct uniphier_serial __iomem *membase; }; @@ -55,14 +44,14 @@ struct uniphier_serial_private_data { #define uniphier_serial_port(dev) \ ((struct uniphier_serial_private_data *)dev_get_priv(dev))->membase -int uniphier_serial_setbrg(struct udevice *dev, int baudrate) +static int uniphier_serial_setbrg(struct udevice *dev, int baudrate) { struct uniphier_serial_platform_data *plat = dev_get_platdata(dev); struct uniphier_serial __iomem *port = uniphier_serial_port(dev); const unsigned int mode_x_div = 16; unsigned int divisor; - writeb(UART_LCR_WLS_8, &port->lcr); + writeb(UART_LCR_WLEN8, &port->lcr); divisor = DIV_ROUND_CLOSEST(plat->uartclk, mode_x_div * baudrate); @@ -93,7 +82,17 @@ static int uniphier_serial_putc(struct udevice *dev, const char c) return 0; } -int uniphier_serial_probe(struct udevice *dev) +static int uniphier_serial_pending(struct udevice *dev, bool input) +{ + struct uniphier_serial __iomem *port = uniphier_serial_port(dev); + + if (input) + return readb(&port->lsr) & UART_LSR_DR; + else + return !(readb(&port->lsr) & UART_LSR_THRE); +} + +static int uniphier_serial_probe(struct udevice *dev) { struct uniphier_serial_private_data *priv = dev_get_priv(dev); struct uniphier_serial_platform_data *plat = dev_get_platdata(dev); @@ -106,7 +105,7 @@ int uniphier_serial_probe(struct udevice *dev) return 0; } -int uniphier_serial_remove(struct udevice *dev) +static int uniphier_serial_remove(struct udevice *dev) { unmap_sysmem(uniphier_serial_port(dev)); @@ -134,6 +133,7 @@ static const struct dm_serial_ops uniphier_serial_ops = { .setbrg = uniphier_serial_setbrg, .getc = uniphier_serial_getc, .putc = uniphier_serial_putc, + .pending = uniphier_serial_pending, }; U_BOOT_DRIVER(uniphier_serial) = { diff --git a/drivers/spi/altera_spi.c b/drivers/spi/altera_spi.c index 5accbb5c22..a4d03d97cf 100644 --- a/drivers/spi/altera_spi.c +++ b/drivers/spi/altera_spi.c @@ -12,58 +12,62 @@ #include <malloc.h> #include <spi.h> -#define ALTERA_SPI_RXDATA 0 -#define ALTERA_SPI_TXDATA 4 -#define ALTERA_SPI_STATUS 8 -#define ALTERA_SPI_CONTROL 12 -#define ALTERA_SPI_SLAVE_SEL 20 - -#define ALTERA_SPI_STATUS_ROE_MSK (0x8) -#define ALTERA_SPI_STATUS_TOE_MSK (0x10) -#define ALTERA_SPI_STATUS_TMT_MSK (0x20) -#define ALTERA_SPI_STATUS_TRDY_MSK (0x40) -#define ALTERA_SPI_STATUS_RRDY_MSK (0x80) -#define ALTERA_SPI_STATUS_E_MSK (0x100) - -#define ALTERA_SPI_CONTROL_IROE_MSK (0x8) -#define ALTERA_SPI_CONTROL_ITOE_MSK (0x10) -#define ALTERA_SPI_CONTROL_ITRDY_MSK (0x40) -#define ALTERA_SPI_CONTROL_IRRDY_MSK (0x80) -#define ALTERA_SPI_CONTROL_IE_MSK (0x100) -#define ALTERA_SPI_CONTROL_SSO_MSK (0x400) +#ifndef CONFIG_ALTERA_SPI_IDLE_VAL +#define CONFIG_ALTERA_SPI_IDLE_VAL 0xff +#endif #ifndef CONFIG_SYS_ALTERA_SPI_LIST #define CONFIG_SYS_ALTERA_SPI_LIST { CONFIG_SYS_SPI_BASE } #endif +struct altera_spi_regs { + u32 rxdata; + u32 txdata; + u32 status; + u32 control; + u32 _reserved; + u32 slave_sel; +}; + +#define ALTERA_SPI_STATUS_ROE_MSK (1 << 3) +#define ALTERA_SPI_STATUS_TOE_MSK (1 << 4) +#define ALTERA_SPI_STATUS_TMT_MSK (1 << 5) +#define ALTERA_SPI_STATUS_TRDY_MSK (1 << 6) +#define ALTERA_SPI_STATUS_RRDY_MSK (1 << 7) +#define ALTERA_SPI_STATUS_E_MSK (1 << 8) + +#define ALTERA_SPI_CONTROL_IROE_MSK (1 << 3) +#define ALTERA_SPI_CONTROL_ITOE_MSK (1 << 4) +#define ALTERA_SPI_CONTROL_ITRDY_MSK (1 << 6) +#define ALTERA_SPI_CONTROL_IRRDY_MSK (1 << 7) +#define ALTERA_SPI_CONTROL_IE_MSK (1 << 8) +#define ALTERA_SPI_CONTROL_SSO_MSK (1 << 10) + static ulong altera_spi_base_list[] = CONFIG_SYS_ALTERA_SPI_LIST; struct altera_spi_slave { - struct spi_slave slave; - ulong base; + struct spi_slave slave; + struct altera_spi_regs *regs; }; #define to_altera_spi_slave(s) container_of(s, struct altera_spi_slave, slave) -__attribute__((weak)) -int spi_cs_is_valid(unsigned int bus, unsigned int cs) +__weak int spi_cs_is_valid(unsigned int bus, unsigned int cs) { return bus < ARRAY_SIZE(altera_spi_base_list) && cs < 32; } -__attribute__((weak)) -void spi_cs_activate(struct spi_slave *slave) +__weak void spi_cs_activate(struct spi_slave *slave) { struct altera_spi_slave *altspi = to_altera_spi_slave(slave); - writel(1 << slave->cs, altspi->base + ALTERA_SPI_SLAVE_SEL); - writel(ALTERA_SPI_CONTROL_SSO_MSK, altspi->base + ALTERA_SPI_CONTROL); + writel(1 << slave->cs, &altspi->regs->slave_sel); + writel(ALTERA_SPI_CONTROL_SSO_MSK, &altspi->regs->control); } -__attribute__((weak)) -void spi_cs_deactivate(struct spi_slave *slave) +__weak void spi_cs_deactivate(struct spi_slave *slave) { struct altera_spi_slave *altspi = to_altera_spi_slave(slave); - writel(0, altspi->base + ALTERA_SPI_CONTROL); - writel(0, altspi->base + ALTERA_SPI_SLAVE_SEL); + writel(0, &altspi->regs->control); + writel(0, &altspi->regs->slave_sel); } void spi_init(void) @@ -87,9 +91,8 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!altspi) return NULL; - altspi->base = altera_spi_base_list[bus]; - debug("%s: bus:%i cs:%i base:%lx\n", __func__, - bus, cs, altspi->base); + altspi->regs = (struct altera_spi_regs *)altera_spi_base_list[bus]; + debug("%s: bus:%i cs:%i base:%p\n", __func__, bus, cs, altspi->regs); return &altspi->slave; } @@ -105,8 +108,8 @@ int spi_claim_bus(struct spi_slave *slave) struct altera_spi_slave *altspi = to_altera_spi_slave(slave); debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); - writel(0, altspi->base + ALTERA_SPI_CONTROL); - writel(0, altspi->base + ALTERA_SPI_SLAVE_SEL); + writel(0, &altspi->regs->control); + writel(0, &altspi->regs->slave_sel); return 0; } @@ -115,24 +118,22 @@ void spi_release_bus(struct spi_slave *slave) struct altera_spi_slave *altspi = to_altera_spi_slave(slave); debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); - writel(0, altspi->base + ALTERA_SPI_SLAVE_SEL); + writel(0, &altspi->regs->slave_sel); } -#ifndef CONFIG_ALTERA_SPI_IDLE_VAL -# define CONFIG_ALTERA_SPI_IDLE_VAL 0xff -#endif - int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, void *din, unsigned long flags) { struct altera_spi_slave *altspi = to_altera_spi_slave(slave); /* assume spi core configured to do 8 bit transfers */ - uint bytes = bitlen / 8; - const uchar *txp = dout; - uchar *rxp = din; + unsigned int bytes = bitlen / 8; + const unsigned char *txp = dout; + unsigned char *rxp = din; + uint32_t reg, data, start; debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__, - slave->bus, slave->cs, bitlen, bytes, flags); + slave->bus, slave->cs, bitlen, bytes, flags); + if (bitlen == 0) goto done; @@ -142,25 +143,40 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, } /* empty read buffer */ - if (readl(altspi->base + ALTERA_SPI_STATUS) & - ALTERA_SPI_STATUS_RRDY_MSK) - readl(altspi->base + ALTERA_SPI_RXDATA); + if (readl(&altspi->regs->status) & ALTERA_SPI_STATUS_RRDY_MSK) + readl(&altspi->regs->rxdata); + if (flags & SPI_XFER_BEGIN) spi_cs_activate(slave); while (bytes--) { - uchar d = txp ? *txp++ : CONFIG_ALTERA_SPI_IDLE_VAL; - debug("%s: tx:%x ", __func__, d); - writel(d, altspi->base + ALTERA_SPI_TXDATA); - while (!(readl(altspi->base + ALTERA_SPI_STATUS) & - ALTERA_SPI_STATUS_RRDY_MSK)) - ; - d = readl(altspi->base + ALTERA_SPI_RXDATA); + if (txp) + data = *txp++; + else + data = CONFIG_ALTERA_SPI_IDLE_VAL; + + debug("%s: tx:%x ", __func__, data); + writel(data, &altspi->regs->txdata); + + start = get_timer(0); + while (1) { + reg = readl(&altspi->regs->status); + if (reg & ALTERA_SPI_STATUS_RRDY_MSK) + break; + if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) { + printf("%s: Transmission timed out!\n", __func__); + goto done; + } + } + + data = readl(&altspi->regs->rxdata); if (rxp) - *rxp++ = d; - debug("rx:%x\n", d); + *rxp++ = data & 0xff; + + debug("rx:%x\n", data); } - done: + +done: if (flags & SPI_XFER_END) spi_cs_deactivate(slave); diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index be102692d4..23f2ba6223 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -49,6 +49,8 @@ struct mxc_spi_slave { #endif int gpio; int ss_pol; + unsigned int max_hz; + unsigned int mode; }; static inline struct mxc_spi_slave *to_mxc_spi_slave(struct spi_slave *slave) @@ -83,12 +85,13 @@ u32 get_cspi_div(u32 div) } #ifdef MXC_CSPI -static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, - unsigned int max_hz, unsigned int mode) +static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs) { unsigned int ctrl_reg; u32 clk_src; u32 div; + unsigned int max_hz = mxcs->max_hz; + unsigned int mode = mxcs->mode; clk_src = mxc_get_clock(MXC_CSPI_CLK); @@ -120,19 +123,15 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, #endif #ifdef MXC_ECSPI -static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, - unsigned int max_hz, unsigned int mode) +static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs) { u32 clk_src = mxc_get_clock(MXC_CSPI_CLK); s32 reg_ctrl, reg_config; u32 ss_pol = 0, sclkpol = 0, sclkpha = 0, sclkctl = 0; u32 pre_div = 0, post_div = 0; struct cspi_regs *regs = (struct cspi_regs *)mxcs->base; - - if (max_hz == 0) { - printf("Error: desired clock is 0\n"); - return -1; - } + unsigned int max_hz = mxcs->max_hz; + unsigned int mode = mxcs->mode; /* * Reset SPI and set all CSs to master mode, if toggling @@ -169,9 +168,6 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, reg_ctrl = (reg_ctrl & ~MXC_CSPICTRL_POSTDIV(0x0F)) | MXC_CSPICTRL_POSTDIV(post_div); - /* We need to disable SPI before changing registers */ - reg_ctrl &= ~MXC_CSPICTRL_EN; - if (mode & SPI_CS_HIGH) ss_pol = 1; @@ -412,6 +408,11 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (bus >= ARRAY_SIZE(spi_bases)) return NULL; + if (max_hz == 0) { + printf("Error: desired clock is 0\n"); + return NULL; + } + mxcs = spi_alloc_slave(struct mxc_spi_slave, bus, cs); if (!mxcs) { puts("mxc_spi: SPI Slave not allocated !\n"); @@ -427,13 +428,9 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, } mxcs->base = spi_bases[bus]; + mxcs->max_hz = max_hz; + mxcs->mode = mode; - ret = spi_cfg_mxc(mxcs, cs, max_hz, mode); - if (ret) { - printf("mxc_spi: cannot setup SPI controller\n"); - free(mxcs); - return NULL; - } return &mxcs->slave; } @@ -446,12 +443,17 @@ void spi_free_slave(struct spi_slave *slave) int spi_claim_bus(struct spi_slave *slave) { + int ret; struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave); struct cspi_regs *regs = (struct cspi_regs *)mxcs->base; reg_write(®s->rxdata, 1); udelay(1); - reg_write(®s->ctrl, mxcs->ctrl_reg); + ret = spi_cfg_mxc(mxcs, slave->cs); + if (ret) { + printf("mxc_spi: cannot setup SPI controller\n"); + return ret; + } reg_write(®s->period, MXC_CSPIPERIOD_32KHZ); reg_write(®s->intr, 0); diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index e69de29bb2..b4a9442703 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -0,0 +1,46 @@ +config USB_ARCH_HAS_HCD + def_bool y + +config USB + bool "Support for Host-side USB" + depends on USB_ARCH_HAS_HCD + ---help--- + Universal Serial Bus (USB) is a specification for a serial bus + subsystem which offers higher speeds and more features than the + traditional PC serial port. The bus supplies power to peripherals + and allows for hot swapping. Up to 127 USB peripherals can be + connected to a single USB host in a tree structure. + + The USB host is the root of the tree, the peripherals are the + leaves and the inner nodes are special USB devices called hubs. + Most PCs now have USB host ports, used to connect peripherals + such as scanners, keyboards, mice, modems, cameras, disks, + flash memory, network links, and printers to the PC. + + Say Y here if your computer has a host-side USB port and you want + to use USB devices. You then need to say Y to at least one of the + Host Controller Driver (HCD) options below. Choose a USB 1.1 + controller, such as "UHCI HCD support" or "OHCI HCD support", + and "EHCI HCD (USB 2.0) support" except for older systems that + do not have USB 2.0 support. It doesn't normally hurt to select + them all if you are not certain. + + If your system has a device-side USB port, used in the peripheral + side of the USB protocol, see the "USB Gadget" framework instead. + + After choosing your HCD, then select drivers for the USB peripherals + you'll be using. You may want to check out the information provided + in <file:Documentation/usb/> and especially the links given in + <file:Documentation/usb/usb-help.txt>. + +if USB + +source "drivers/usb/host/Kconfig" + +config USB_STORAGE + bool "USB Mass Storage support" + ---help--- + Say Y here if you want to connect USB mass storage devices to your + board's USB port. + +endif diff --git a/drivers/usb/eth/Makefile b/drivers/usb/eth/Makefile index 94551c4c0c..e6ae9f1e52 100644 --- a/drivers/usb/eth/Makefile +++ b/drivers/usb/eth/Makefile @@ -5,8 +5,6 @@ # new USB host ethernet layer dependencies obj-$(CONFIG_USB_HOST_ETHER) += usb_ether.o -ifdef CONFIG_USB_ETHER_ASIX -obj-y += asix.o -endif +obj-$(CONFIG_USB_ETHER_ASIX) += asix.o obj-$(CONFIG_USB_ETHER_MCS7830) += mcs7830.o obj-$(CONFIG_USB_ETHER_SMSC95XX) += smsc95xx.o diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 2efd5a4d5b..70bb550fa4 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_USB_ETHER) += epautoconf.o config.o usbstring.o ifdef CONFIG_USB_GADGET obj-$(CONFIG_USB_GADGET_ATMEL_USBA) += atmel_usba_udc.o obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o +obj-$(CONFIG_USB_GADGET_S3C_UDC_OTG_PHY) += s3c_udc_otg_phy.o obj-$(CONFIG_USB_GADGET_FOTG210) += fotg210.o obj-$(CONFIG_CI_UDC) += ci_udc.o obj-$(CONFIG_THOR_FUNCTION) += f_thor.o diff --git a/drivers/usb/gadget/s3c_udc_otg.c b/drivers/usb/gadget/s3c_udc_otg.c index b9816dfe30..7653f03949 100644 --- a/drivers/usb/gadget/s3c_udc_otg.c +++ b/drivers/usb/gadget/s3c_udc_otg.c @@ -31,7 +31,6 @@ #include <asm/io.h> #include <asm/mach-types.h> -#include <asm/arch/gpio.h> #include "regs-otg.h" #include <usb/lin_gadget_compat.h> @@ -105,7 +104,7 @@ static void stop_activity(struct s3c_udc *dev, struct usb_gadget_driver *driver); static int udc_enable(struct s3c_udc *dev); static void udc_set_address(struct s3c_udc *dev, unsigned char address); -static void reconfig_usbd(void); +static void reconfig_usbd(struct s3c_udc *dev); static void set_max_pktsize(struct s3c_udc *dev, enum usb_device_speed speed); static void nuke(struct s3c_ep *ep, int status); static int s3c_udc_set_halt(struct usb_ep *_ep, int value); @@ -146,68 +145,14 @@ static struct usb_ep_ops s3c_ep_ops = { void __iomem *regs_otg; struct s3c_usbotg_reg *reg; -struct s3c_usbotg_phy *phy; -static unsigned int usb_phy_ctrl; bool dfu_usb_get_reset(void) { return !!(readl(®->gintsts) & INT_RESET); } -void otg_phy_init(struct s3c_udc *dev) -{ - dev->pdata->phy_control(1); - - /*USB PHY0 Enable */ - printf("USB PHY0 Enable\n"); - - /* Enable PHY */ - writel(readl(usb_phy_ctrl) | USB_PHY_CTRL_EN0, usb_phy_ctrl); - - if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210 Universal */ - writel((readl(&phy->phypwr) - &~(PHY_0_SLEEP | OTG_DISABLE_0 | ANALOG_PWRDOWN) - &~FORCE_SUSPEND_0), &phy->phypwr); - else /* C110 GONI */ - writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN) - &~FORCE_SUSPEND_0), &phy->phypwr); - - if (s5p_cpu_id == 0x4412) - writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 | - EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ, - &phy->phyclk); /* PLL 24Mhz */ - else - writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) | - CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */ - - writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST)) - | PHY_SW_RST0, &phy->rstcon); - udelay(10); - writel(readl(&phy->rstcon) - &~(PHY_SW_RST0 | LINK_SW_RST | PHYLNK_SW_RST), &phy->rstcon); - udelay(10); -} - -void otg_phy_off(struct s3c_udc *dev) -{ - /* reset controller just in case */ - writel(PHY_SW_RST0, &phy->rstcon); - udelay(20); - writel(readl(&phy->phypwr) &~PHY_SW_RST0, &phy->rstcon); - udelay(20); - - writel(readl(&phy->phypwr) | OTG_DISABLE_0 | ANALOG_PWRDOWN - | FORCE_SUSPEND_0, &phy->phypwr); - - writel(readl(usb_phy_ctrl) &~USB_PHY_CTRL_EN0, usb_phy_ctrl); - - writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)), - &phy->phyclk); - - udelay(10000); - - dev->pdata->phy_control(0); -} +__weak void otg_phy_init(struct s3c_udc *dev) {} +__weak void otg_phy_off(struct s3c_udc *dev) {} /***********************************************************/ @@ -270,7 +215,7 @@ static int udc_enable(struct s3c_udc *dev) debug_cond(DEBUG_SETUP != 0, "%s: %p\n", __func__, dev); otg_phy_init(dev); - reconfig_usbd(); + reconfig_usbd(dev); debug_cond(DEBUG_SETUP != 0, "S3C USB 2.0 OTG Controller Core Initialized : 0x%x\n", @@ -451,15 +396,17 @@ static void stop_activity(struct s3c_udc *dev, udc_reinit(dev); } -static void reconfig_usbd(void) +static void reconfig_usbd(struct s3c_udc *dev) { /* 2. Soft-reset OTG Core and then unreset again. */ int i; unsigned int uTemp = writel(CORE_SOFT_RESET, ®->grstctl); + uint32_t dflt_gusbcfg; debug("Reseting OTG controller\n"); - writel(0<<15 /* PHY Low Power Clock sel*/ + dflt_gusbcfg = + 0<<15 /* PHY Low Power Clock sel*/ |1<<14 /* Non-Periodic TxFIFO Rewind Enable*/ |0x5<<10 /* Turnaround time*/ |0<<9 | 0<<8 /* [0:HNP disable,1:HNP enable][ 0:SRP disable*/ @@ -468,8 +415,12 @@ static void reconfig_usbd(void) |0<<6 /* 0: high speed utmi+, 1: full speed serial*/ |0<<4 /* 0: utmi+, 1:ulpi*/ |1<<3 /* phy i/f 0:8bit, 1:16bit*/ - |0x7<<0, /* HS/FS Timeout**/ - ®->gusbcfg); + |0x7<<0; /* HS/FS Timeout**/ + + if (dev->pdata->usb_gusbcfg) + dflt_gusbcfg = dev->pdata->usb_gusbcfg; + + writel(dflt_gusbcfg, ®->gusbcfg); /* 3. Put the OTG device core in the disconnected state.*/ uTemp = readl(®->dctl); @@ -854,9 +805,7 @@ int s3c_udc_probe(struct s3c_plat_otg_data *pdata) dev->pdata = pdata; - phy = (struct s3c_usbotg_phy *)pdata->regs_phy; reg = (struct s3c_usbotg_reg *)pdata->regs_otg; - usb_phy_ctrl = pdata->usb_phy_ctrl; /* regs_otg = (void *)pdata->regs_otg; */ diff --git a/drivers/usb/gadget/s3c_udc_otg_phy.c b/drivers/usb/gadget/s3c_udc_otg_phy.c new file mode 100644 index 0000000000..f13cb8910a --- /dev/null +++ b/drivers/usb/gadget/s3c_udc_otg_phy.c @@ -0,0 +1,101 @@ +/* + * drivers/usb/gadget/s3c_udc_otg.c + * Samsung S3C on-chip full/high speed USB OTG 2.0 device controllers + * + * Copyright (C) 2008 for Samsung Electronics + * + * BSP Support for Samsung's UDC driver + * available at: + * git://git.kernel.org/pub/scm/linux/kernel/git/kki_ap/linux-2.6-samsung.git + * + * State machine bugfixes: + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * Ported to u-boot: + * Marek Szyprowski <m.szyprowski@samsung.com> + * Lukasz Majewski <l.majewski@samsumg.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/errno.h> +#include <linux/list.h> +#include <malloc.h> + +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include <asm/byteorder.h> +#include <asm/unaligned.h> +#include <asm/io.h> + +#include <asm/mach-types.h> + +#include "regs-otg.h" +#include <usb/lin_gadget_compat.h> + +#include <usb/s3c_udc.h> + +void otg_phy_init(struct s3c_udc *dev) +{ + unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl; + struct s3c_usbotg_phy *phy = + (struct s3c_usbotg_phy *)dev->pdata->regs_phy; + + dev->pdata->phy_control(1); + + /* USB PHY0 Enable */ + printf("USB PHY0 Enable\n"); + + /* Enable PHY */ + writel(readl(usb_phy_ctrl) | USB_PHY_CTRL_EN0, usb_phy_ctrl); + + if (dev->pdata->usb_flags == PHY0_SLEEP) /* C210 Universal */ + writel((readl(&phy->phypwr) + &~(PHY_0_SLEEP | OTG_DISABLE_0 | ANALOG_PWRDOWN) + &~FORCE_SUSPEND_0), &phy->phypwr); + else /* C110 GONI */ + writel((readl(&phy->phypwr) &~(OTG_DISABLE_0 | ANALOG_PWRDOWN) + &~FORCE_SUSPEND_0), &phy->phypwr); + + if (s5p_cpu_id == 0x4412) + writel((readl(&phy->phyclk) & ~(EXYNOS4X12_ID_PULLUP0 | + EXYNOS4X12_COMMON_ON_N0)) | EXYNOS4X12_CLK_SEL_24MHZ, + &phy->phyclk); /* PLL 24Mhz */ + else + writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)) | + CLK_SEL_24MHZ, &phy->phyclk); /* PLL 24Mhz */ + + writel((readl(&phy->rstcon) &~(LINK_SW_RST | PHYLNK_SW_RST)) + | PHY_SW_RST0, &phy->rstcon); + udelay(10); + writel(readl(&phy->rstcon) + &~(PHY_SW_RST0 | LINK_SW_RST | PHYLNK_SW_RST), &phy->rstcon); + udelay(10); +} + +void otg_phy_off(struct s3c_udc *dev) +{ + unsigned int usb_phy_ctrl = dev->pdata->usb_phy_ctrl; + struct s3c_usbotg_phy *phy = + (struct s3c_usbotg_phy *)dev->pdata->regs_phy; + + /* reset controller just in case */ + writel(PHY_SW_RST0, &phy->rstcon); + udelay(20); + writel(readl(&phy->phypwr) &~PHY_SW_RST0, &phy->rstcon); + udelay(20); + + writel(readl(&phy->phypwr) | OTG_DISABLE_0 | ANALOG_PWRDOWN + | FORCE_SUSPEND_0, &phy->phypwr); + + writel(readl(usb_phy_ctrl) &~USB_PHY_CTRL_EN0, usb_phy_ctrl); + + writel((readl(&phy->phyclk) & ~(ID_PULLUP0 | COMMON_ON_N0)), + &phy->phyclk); + + udelay(10000); + + dev->pdata->phy_control(0); +} diff --git a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c index 4f69b22a25..9c54b462c4 100644 --- a/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c +++ b/drivers/usb/gadget/s3c_udc_otg_xfer_dma.c @@ -551,7 +551,7 @@ static int s3c_udc_irq(int irq, void *_dev) debug_cond(DEBUG_ISR, "\t\tOTG core got reset (%d)!!\n", reset_available); - reconfig_usbd(); + reconfig_usbd(dev); dev->ep0state = WAIT_FOR_SETUP; reset_available = 0; s3c_udc_pre_setup(); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig new file mode 100644 index 0000000000..30d1457638 --- /dev/null +++ b/drivers/usb/host/Kconfig @@ -0,0 +1,56 @@ +# +# USB Host Controller Drivers +# +comment "USB Host Controller Drivers" + +config USB_XHCI_HCD + bool "xHCI HCD (USB 3.0) support" + ---help--- + The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0 + "SuperSpeed" host controller hardware. + +config USB_XHCI + bool + default USB_XHCI_HCD + ---help--- + TODO: rename after most boards switch to Kconfig + +if USB_XHCI_HCD + +endif + +config USB_EHCI_HCD + bool "EHCI HCD (USB 2.0) support" + ---help--- + The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 + "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. + If your USB host controller supports USB 2.0, you will likely want to + configure this Host Controller Driver. + + EHCI controllers are packaged with "companion" host controllers (OHCI + or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports + will connect to EHCI if the device is high speed, otherwise they + connect to a companion controller. If you configure EHCI, you should + probably configure the OHCI (for NEC and some other vendors) USB Host + Controller Driver or UHCI (for Via motherboards) Host Controller + Driver too. + + You may want to read <file:Documentation/usb/ehci.txt>. + +config USB_EHCI + bool + default USB_EHCI_HCD + ---help--- + TODO: rename after most boards switch to Kconfig + +if USB_EHCI_HCD + +config USB_EHCI_UNIPHIER + bool "Support for Panasonic UniPhier on-chip EHCI USB controller" + depends on ARCH_UNIPHIER + default y + ---help--- + Enables support for the on-chip EHCI controller on Panasonic + UniPhier SoCs. + +endif diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 1c3592914d..c11b551620 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o +obj-$(CONFIG_USB_EHCI_UNIPHIER) += ehci-uniphier.o obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 936d006ba4..c671c72cb1 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1097,6 +1097,7 @@ submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, } struct int_queue { + int elementsize; struct QH *first; struct QH *current; struct QH *last; @@ -1154,6 +1155,23 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, struct int_queue *result = NULL; int i; + /* + * Interrupt transfers requiring several transactions are not supported + * because bInterval is ignored. + * + * Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2 + * <= PKT_ALIGN if several qTDs are required, while the USB + * specification does not constrain this for interrupt transfers. That + * means that ehci_submit_async() would support interrupt transfers + * requiring several transactions only as long as the transfer size does + * not require more than a single qTD. + */ + if (elementsize > usb_maxpacket(dev, pipe)) { + printf("%s: xfers requiring several transactions are not supported.\n", + __func__); + return NULL; + } + debug("Enter create_int_queue\n"); if (usb_pipetype(pipe) != PIPE_INTERRUPT) { debug("non-interrupt pipe (type=%lu)", usb_pipetype(pipe)); @@ -1174,6 +1192,7 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, debug("ehci intr queue: out of memory\n"); goto fail1; } + result->elementsize = elementsize; result->first = memalign(USB_DMA_MINALIGN, sizeof(struct QH) * queuesize); if (!result->first) { @@ -1249,9 +1268,11 @@ create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, ALIGN_END_ADDR(struct qTD, result->tds, queuesize)); - if (disable_periodic(ctrl) < 0) { - debug("FATAL: periodic should never fail, but did"); - goto fail3; + if (ctrl->periodic_schedules > 0) { + if (disable_periodic(ctrl) < 0) { + debug("FATAL: periodic should never fail, but did"); + goto fail3; + } } /* hook up to periodic list */ @@ -1308,13 +1329,18 @@ void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) queue->current++; else queue->current = NULL; + + invalidate_dcache_range((uint32_t)cur->buffer, + ALIGN_END_ADDR(char, cur->buffer, + queue->elementsize)); + debug("Exit poll_int_queue with completed intr transfer. token is %x at %p (first at %p)\n", hc32_to_cpu(cur_td->qt_token), cur, queue->first); return cur->buffer; } /* Do not free buffers associated with QHs, they're owned by someone else */ -static int +int destroy_int_queue(struct usb_device *dev, struct int_queue *queue) { struct ehci_ctrl *ctrl = dev->controller; @@ -1373,24 +1399,9 @@ submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d", dev, pipe, buffer, length, interval); - /* - * Interrupt transfers requiring several transactions are not supported - * because bInterval is ignored. - * - * Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2 - * <= PKT_ALIGN if several qTDs are required, while the USB - * specification does not constrain this for interrupt transfers. That - * means that ehci_submit_async() would support interrupt transfers - * requiring several transactions only as long as the transfer size does - * not require more than a single qTD. - */ - if (length > usb_maxpacket(dev, pipe)) { - printf("%s: Interrupt transfers requiring several " - "transactions are not supported.\n", __func__); - return -1; - } - queue = create_int_queue(dev, pipe, 1, length, buffer); + if (!queue) + return -1; timeout = get_timer(0) + USB_TIMEOUT_MS(pipe); while ((backbuffer = poll_int_queue(dev, queue)) == NULL) @@ -1406,9 +1417,6 @@ submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, return -EINVAL; } - invalidate_dcache_range((uint32_t)buffer, - ALIGN_END_ADDR(char, buffer, length)); - ret = destroy_int_queue(dev, queue); if (ret < 0) return ret; diff --git a/drivers/usb/host/ehci-rmobile.c b/drivers/usb/host/ehci-rmobile.c index 0d1a726d35..7fe79efc17 100644 --- a/drivers/usb/host/ehci-rmobile.c +++ b/drivers/usb/host/ehci-rmobile.c @@ -13,22 +13,18 @@ #include "ehci.h" #if defined(CONFIG_R8A7740) -static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { +static u32 usb_base_address[] = { 0xC6700000 }; #elif defined(CONFIG_R8A7790) -static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { +static u32 usb_base_address[] = { 0xEE080000, /* USB0 (EHCI) */ 0xEE0A0000, /* USB1 */ 0xEE0C0000, /* USB2 */ }; -#elif defined(CONFIG_R8A7791) -static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { - 0xEE080000, /* USB0 (EHCI) */ - 0xEE0C0000, /* USB1 */ -}; -#elif defined(CONFIG_R8A7794) -static u32 usb_base_address[CONFIG_USB_MAX_CONTROLLER_COUNT] = { +#elif defined(CONFIG_R8A7791) || defined(CONFIG_R8A7793) || \ + defined(CONFIG_R8A7794) +static u32 usb_base_address[] = { 0xEE080000, /* USB0 (EHCI) */ 0xEE0C0000, /* USB1 */ }; @@ -57,7 +53,7 @@ int ehci_hcd_stop(int index) if (!i) printf("error : ehci(%d) reset failed.\n", index); - if (index == (CONFIG_USB_MAX_CONTROLLER_COUNT - 1)) + if (index == (ARRAY_SIZE(usb_base_address) - 1)) setbits_le32(SMSTPCR7, SMSTPCR703); return 0; diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c index 23617b7adc..4befd57454 100644 --- a/drivers/usb/host/ehci-sunxi.c +++ b/drivers/usb/host/ehci-sunxi.c @@ -105,7 +105,7 @@ static void sunxi_usb_phy_init(struct sunxi_ehci_hcd *sunxi_ehci) usb_phy_write(sunxi_ehci, 0x20, 0x14, 5); /* threshold adjustment disconnect */ -#ifdef CONFIG_SUN4I +#ifdef CONFIG_MACH_SUN4I usb_phy_write(sunxi_ehci, 0x2a, 3, 2); #else usb_phy_write(sunxi_ehci, 0x2a, 2, 2); @@ -163,11 +163,16 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index]; + int err; /* enable common PHY only once */ if (index == 0) setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE); + err = gpio_request(sunxi_ehci->gpio_vbus, "ehci_vbus"); + if (err) + return err; + sunxi_ehci_enable(sunxi_ehci); *hccr = get_io_base(sunxi_ehci->id); @@ -188,9 +193,14 @@ int ehci_hcd_stop(int index) { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index]; + int err; sunxi_ehci_disable(sunxi_ehci); + err = gpio_free(sunxi_ehci->gpio_vbus); + if (err) + return err; + /* disable common PHY only once, for the last enabled hcd */ if (enabled_hcd_count == 1) clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE); diff --git a/drivers/usb/host/ehci-uniphier.c b/drivers/usb/host/ehci-uniphier.c new file mode 100644 index 0000000000..77f6c9d9d1 --- /dev/null +++ b/drivers/usb/host/ehci-uniphier.c @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Author: Masahiro Yamada <yamada.m@jp.panasonic.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <usb.h> +#include <asm/arch/ehci-uniphier.h> +#include "ehci.h" + +/* + * Create the appropriate control structures to manage + * a new EHCI host controller. + */ +int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, + struct ehci_hcor **hcor) +{ + struct ehci_hccr *cr; + struct ehci_hcor *or; + + uniphier_ehci_reset(index, 0); + + cr = (struct ehci_hccr *)(uniphier_ehci_platdata[index].base); + or = (void *)cr + HC_LENGTH(ehci_readl(&cr->cr_capbase)); + + *hccr = cr; + *hcor = or; + + return 0; +} + +int ehci_hcd_stop(int index) +{ + uniphier_ehci_reset(index, 1); + + return 0; +} diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 433e703da8..79aecd414e 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -47,9 +47,9 @@ struct ehci_hcor { uint32_t or_usbcmd; #define CMD_PARK (1 << 11) /* enable "park" */ #define CMD_PARK_CNT(c) (((c) >> 8) & 3) /* how many transfers to park */ -#define CMD_ASE (1 << 5) /* async schedule enable */ #define CMD_LRESET (1 << 7) /* partial reset */ -#define CMD_IAAD (1 << 5) /* "doorbell" interrupt */ +#define CMD_IAAD (1 << 6) /* "doorbell" interrupt */ +#define CMD_ASE (1 << 5) /* async schedule enable */ #define CMD_PSE (1 << 4) /* periodic schedule enable */ #define CMD_RESET (1 << 1) /* reset HC not bus */ #define CMD_RUN (1 << 0) /* start/stop HC */ diff --git a/fs/zfs/zfs.c b/fs/zfs/zfs.c index 818d3d926d..fb2b3ee089 100644 --- a/fs/zfs/zfs.c +++ b/fs/zfs/zfs.c @@ -736,7 +736,7 @@ zap_hash(uint64_t salt, const char *name) uint64_t crc = salt; if (table[128] == 0) { - uint64_t *ct; + uint64_t *ct = NULL; int i, j; for (i = 0; i < 256; i++) { for (ct = table + i, *ct = i, j = 8; j > 0; j--) @@ -1060,6 +1060,7 @@ zap_lookup(dnode_end_t *zap_dnode, char *name, uint64_t *val, } printf("unknown ZAP type\n"); + free(zapbuf); return ZFS_ERR_BAD_FS; } @@ -1094,6 +1095,7 @@ zap_iterate(dnode_end_t *zap_dnode, return ret; } printf("unknown ZAP type\n"); + free(zapbuf); return 0; } @@ -1865,6 +1867,7 @@ zfs_mount(device_t dev) ubbest = malloc(sizeof(*ubbest)); if (!ubbest) { + free(ub_array); zfs_unmount(data); return 0; } @@ -1953,6 +1956,7 @@ zfs_mount(device_t dev) if (err) { printf("couldn't zio_read object directory\n"); zfs_unmount(data); + free(osp); free(ubbest); return 0; } @@ -2052,6 +2056,9 @@ zfs_open(struct zfs_file *file, const char *fsfilename) hdrsize = SA_HDR_SIZE(((sa_hdr_phys_t *) sahdrp)); file->size = *(uint64_t *) ((char *) sahdrp + hdrsize + SA_SIZE_OFFSET); + if ((data->dnode.dn.dn_bonuslen == 0) && + (data->dnode.dn.dn_flags & DNODE_FLAG_SPILL_BLKPTR)) + free(sahdrp); } else { file->size = zfs_to_cpu64(((znode_phys_t *) DN_BONUS(&data->dnode.dn))->zp_size, data->dnode.endian); } diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 69c0336cae..cdccbef1f6 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2003-2005 + * (C) Copyright 2003-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * (C) Copyright 2004-2006 @@ -19,6 +19,8 @@ #define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ #define CONFIG_TQM5200 1 /* ... on TQM5200 module */ #undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO /* * Valid values for CONFIG_SYS_TEXT_BASE are: diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index cc2204586e..0d5a2b96f1 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ #define CONFIG_TQM823L 1 /* ...on a TQM8xxL module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 4fd070f27d..e765a03cfb 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ #define CONFIG_TQM823M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index ca3750d407..bbdc3f81fc 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_TQM850L 1 /* ...on a TQM8xxL module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 659c9ad1c3..5fc87f2138 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC850 1 /* This is a MPC850 CPU */ #define CONFIG_TQM850M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index 906d79b0c8..589d168eba 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC855 1 /* This is a MPC855 CPU */ #define CONFIG_TQM855L 1 /* ...on a TQM8xxL module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 44d456e165..60acb564e8 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC855 1 /* This is a MPC855 CPU */ #define CONFIG_TQM855M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 855b0cddc4..ebc5571632 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_TQM860L 1 /* ...on a TQM8xxL module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index 8109379ae9..f4ce07f20e 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC860 1 /* This is a MPC860 CPU */ #define CONFIG_TQM860M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index da4af93d25..97db519d53 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -20,6 +20,8 @@ #define CONFIG_MPC860 1 #define CONFIG_MPC860T 1 #define CONFIG_MPC862 1 +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_TQM862L 1 /* ...on a TQM8xxL module */ diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index ec3a57b961..25d60a74ef 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -20,6 +20,8 @@ #define CONFIG_MPC860 1 #define CONFIG_MPC860T 1 #define CONFIG_MPC862 1 +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_TQM862M 1 /* ...on a TQM8xxM module */ diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index cb8b84d3a1..928b879609 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2008 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * SPDX-License-Identifier: GPL-2.0+ @@ -19,6 +19,8 @@ #define CONFIG_MPC866 1 /* This is a MPC866 CPU */ #define CONFIG_TQM866M 1 /* ...on a TQM8xxM module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index d1e6c5b2bb..598020c867 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2005 + * (C) Copyright 2000-2014 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * (C) Copyright 2006 @@ -22,6 +22,8 @@ #define CONFIG_MPC885 1 /* This is a MPC885 CPU */ #define CONFIG_TQM885D 1 /* ...on a TQM88D module */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_TEXT_BASE 0x40000000 diff --git a/include/configs/alt.h b/include/configs/alt.h index 7238f68820..7bd649fb42 100644 --- a/include/configs/alt.h +++ b/include/configs/alt.h @@ -31,10 +31,17 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_NFS #define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_FAT_WRITE #define CONFIG_CMD_SF #define CONFIG_CMD_SPI +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_TEXT_BASE 0x70000000 +#else #define CONFIG_SYS_TEXT_BASE 0xE6304000 +#endif #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_GENERIC_BOARD @@ -59,7 +66,11 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_TMU_TIMER +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC +#else #define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC +#endif #define STACK_AREA_SIZE 0xC000 #define LOW_LEVEL_MERAM_STACK \ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) @@ -162,4 +173,14 @@ #define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */ +/* Filesystems */ +#define CONFIG_DOS_PARTITION +#define CONFIG_SUPPORT_VFAT + +/* USB */ +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_RMOBILE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + #endif /* __ALT_H */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 1ec783daf4..560e3bf775 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -314,6 +314,18 @@ #define CONFIG_AM335X_USB1 #define CONFIG_AM335X_USB1_MODE MUSB_HOST +#ifndef CONFIG_SPL_USBETH_SUPPORT +/* Fastboot */ +#define CONFIG_CMD_FASTBOOT +#define CONFIG_ANDROID_BOOT_IMAGE +#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR +#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000 + +/* To support eMMC booting */ +#define CONFIG_STORAGE_EMMC +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 +#endif + #ifdef CONFIG_MUSB_HOST #define CONFIG_CMD_USB #define CONFIG_USB_STORAGE @@ -325,8 +337,8 @@ #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" /* USB TI's IDs */ -#define CONFIG_G_DNL_VENDOR_NUM 0x0403 -#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 +#define CONFIG_G_DNL_VENDOR_NUM 0x0451 +#define CONFIG_G_DNL_PRODUCT_NUM 0xD022 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #endif /* CONFIG_MUSB_GADGET */ diff --git a/include/configs/aristainetos.h b/include/configs/aristainetos.h index 20aea8572d..e6a08df4ba 100644 --- a/include/configs/aristainetos.h +++ b/include/configs/aristainetos.h @@ -77,7 +77,7 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 3 -#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 20)<<8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index ea9acf69d1..07ec5f2bd8 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -39,6 +39,7 @@ # define CONFIG_CMD_FAT # define CONFIG_CMD_MMC # define CONFIG_DOS_PARTITION +# define CONFIG_SYS_MMC_MAX_BLK_COUNT 127 # endif # ifdef CONFIG_MMC_SPI # define CONFIG_CMD_MMC_SPI diff --git a/include/configs/cm_t3517.h b/include/configs/cm_t3517.h new file mode 100644 index 0000000000..918032bd75 --- /dev/null +++ b/include/configs/cm_t3517.h @@ -0,0 +1,320 @@ +/* + * (C) Copyright 2013 CompuLab, Ltd. + * Author: Igor Grinberg <grinberg@compulab.co.il> + * + * Configuration settings for the CompuLab CM-T3517 board + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_OMAP /* in a TI OMAP core */ +#define CONFIG_CM_T3517 /* working with CM-T3517 */ +#define CONFIG_OMAP_COMMON +#define CONFIG_SYS_GENERIC_BOARD + +#define CONFIG_SYS_TEXT_BASE 0x80008000 + +/* + * This is needed for the DMA stuff. + * Although the default iss 64, we still define it + * to be on the safe side once the default is changed. + */ +#define CONFIG_SYS_CACHELINE_SIZE 64 + +#define CONFIG_EMIF4 /* The chip has EMIF4 controller */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#define CONFIG_MISC_INIT_R + +#define CONFIG_OF_LIBFDT +/* + * The early kernel mapping on ARM currently only maps from the base of DRAM + * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000. + * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000, + * so that leaves DRAM base to DRAM base + 0x4000 available. + */ +#define CONFIG_SYS_BOOTMAPSZ 0x4000 + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_SERIAL_TAG + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 */ +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} + +#define CONFIG_OMAP_GPIO + +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* USB */ +#define CONFIG_USB_MUSB_AM35X + +#ifndef CONFIG_USB_MUSB_AM35X +#define CONFIG_USB_OMAP3 +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_OMAP +#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146 +#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147 +#else /* !CONFIG_USB_MUSB_AM35X */ +#define CONFIG_MUSB_HOST +#define CONFIG_MUSB_PIO_ONLY +#endif /* CONFIG_USB_MUSB_AM35X */ + +#define CONFIG_USB_STORAGE +#define CONFIG_CMD_USB + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */ +#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=nand" +#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\ + "1920k(u-boot),256k(u-boot-env),"\ + "4m(kernel),-(fs)" + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_GPIO + +#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMLS /* List all found images */ + +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_I2C +#define CONFIG_SYS_OMAP24_I2C_SPEED 400000 +#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 +#define CONFIG_SYS_I2C_OMAP34XX +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_BUS 0 +#define CONFIG_I2C_MULTI_BUS + +/* + * Board NAND Info. + */ +#define CONFIG_SYS_NAND_QUIET_TEST +#define CONFIG_NAND_OMAP_GPMC +#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ + /* to access nand */ +#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ + /* to access nand at */ + /* CS0 */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ + /* devices */ + +/* Environment information */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "baudrate=115200\0" \ + "console=ttyO2,115200n8\0" \ + "mpurate=auto\0" \ + "vram=12M\0" \ + "dvimode=1024x768MR-16@60\0" \ + "defaultdisplay=dvi\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \ + "mmcrootfstype=ext4\0" \ + "nandroot=/dev/mtdblock4 rw\0" \ + "nandrootfstype=ubifs\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "nandargs=setenv bootargs console=${console} " \ + "mpurate=${mpurate} " \ + "vram=${vram} " \ + "omapfb.mode=dvi:${dvimode} " \ + "omapdss.def_disp=${defaultdisplay} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} 2a0000 400000; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_CMD_BOOTZ +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run nandboot; " \ + "fi; " \ + "fi; " \ + "else run nandboot; fi" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_TIMESTAMP +#define CONFIG_SYS_AUTOLOAD "no" +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT "CM-T3517 # " +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000) + +/* + * AM3517 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* CM-T3517 DRAM is only on CS0 */ +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 +#define CONFIG_SYS_CS0_SIZE (256 << 20) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* **** PISMO SUPPORT *** */ +/* Monitor at start of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ + +#define CONFIG_ENV_IS_IN_NAND +#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ +#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET +#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET + +#if defined(CONFIG_CMD_NET) +#define CONFIG_DRIVER_TI_EMAC +#define CONFIG_DRIVER_TI_EMAC_USE_RMII +#define CONFIG_MII +#define CONFIG_SMC911X +#define CONFIG_SMC911X_32_BIT +#define CONFIG_SMC911X_BASE (0x2C000000 + (16 << 20)) +#endif /* CONFIG_CMD_NET */ + +/* additions for new relocation code, must be added to all boards */ +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) + +/* Status LED */ +#define CONFIG_STATUS_LED /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED +#define CONFIG_GPIO_LED +#define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */ +#define GREEN_LED_DEV 0 +#define STATUS_LED_BIT GREEN_LED_GPIO +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +#define STATUS_LED_BOOT GREEN_LED_DEV + +/* GPIO banks */ +#ifdef CONFIG_STATUS_LED +#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ +#endif + +/* Display Configuration */ +#define CONFIG_OMAP3_GPIO_2 +#define CONFIG_OMAP3_GPIO_5 +#define CONFIG_VIDEO_OMAP3 +#define LCD_BPP LCD_COLOR16 + +#define CONFIG_LCD +#define CONFIG_SPLASH_SCREEN +#define CONFIG_SPLASHIMAGE_GUARD +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP +#define CONFIG_SCF0403_LCD + +#define CONFIG_OMAP3_SPI + +#endif /* __CONFIG_H */ diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 4b90dc205d..fef267f70b 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -26,6 +26,7 @@ #define CONFIG_PHYSMEM #define CONFIG_SYS_EARLY_PCI_INIT #define CONFIG_DISPLAY_BOARDINFO_LATE +#define CONFIG_DISPLAY_CPUINFO #define CONFIG_DM #define CONFIG_CMD_DM @@ -48,6 +49,7 @@ #define CONFIG_FIT #undef CONFIG_ZLIB #undef CONFIG_GZIP +#define CONFIG_SYS_BOOTM_LEN (16 << 20) /*----------------------------------------------------------------------- * Watchdog Configuration @@ -221,7 +223,7 @@ #define CONFIG_SYS_MEMTEST_START 0x00100000 #define CONFIG_SYS_MEMTEST_END 0x01000000 -#define CONFIG_SYS_LOAD_ADDR 0x02000000 +#define CONFIG_SYS_LOAD_ADDR 0x20000000 /*----------------------------------------------------------------------- * SDRAM Configuration diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index 89ba14e05d..41631c72e9 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -59,6 +59,7 @@ #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG +#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 2 diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index 308e520252..5a5f9400c3 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -27,7 +27,7 @@ #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds" #define CONFIG_SPL_TEXT_BASE 0x00908000 -#define CONFIG_SPL_MAX_SIZE (64 * 1024) +#define CONFIG_SPL_MAX_SIZE 0x10000 #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/armv7" #define CONFIG_SPL_STACK 0x0091FFB8 #define CONFIG_SPL_LIBCOMMON_SUPPORT diff --git a/include/configs/k2e_evm.h b/include/configs/k2e_evm.h index 7c8065ad18..d83e07e242 100644 --- a/include/configs/k2e_evm.h +++ b/include/configs/k2e_evm.h @@ -17,14 +17,15 @@ /* U-Boot general configuration */ #define CONFIG_SYS_PROMPT "K2E EVM # " -#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ - "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" - -#define KS2_FDT_NAME "name_fdt=k2e-evm.dtb\0" -#define KS2_ADDR_MON "addr_mon=0x0c140000\0" -#define KS2_NAME_MON "name_mon=skern-k2e-evm.bin\0" -#define NAME_UBOOT "name_uboot=u-boot-spi-k2e-evm.gph\0" -#define NAME_UBI "name_ubi=k2e-evm-ubifs.ubi\0" +#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ + "addr_mon=0x0c140000\0" \ + "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \ + "name_fdt=uImage-k2e-evm.dtb\0" \ + "name_mon=skern-k2e-evm.bin\0" \ + "name_ubi=k2e-evm-ubifs.ubi\0" \ + "name_uboot=u-boot-spi-k2e-evm.gph\0" \ + "name_fs=arago-console-image-k2e-evm.cpio.gz\0" #include <configs/ks2_evm.h> @@ -35,14 +36,8 @@ #define CONFIG_SYS_NAND_PAGE_2K /* Network */ -#define CONFIG_DRIVER_TI_KEYSTONE_NET -#define CONFIG_TI_KSNAV -#define CONFIG_KSNAV_PKTDMA_NETCP #define CONFIG_KSNET_NETCP_V1_5 #define CONFIG_KSNET_CPSW_NUM_PORTS 9 #define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE -/* SerDes */ -#define CONFIG_TI_KEYSTONE_SERDES - #endif /* __CONFIG_K2E_EVM_H */ diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 034cbfd4d7..ffddf1391c 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -17,14 +17,15 @@ /* U-Boot general configuration */ #define CONFIG_SYS_PROMPT "K2HK EVM # " -#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ - "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" - -#define KS2_FDT_NAME "name_fdt=k2hk-evm.dtb\0" -#define KS2_ADDR_MON "addr_mon=0x0c5f0000\0" -#define KS2_NAME_MON "name_mon=skern-k2hk-evm.bin\0" -#define NAME_UBOOT "name_uboot=u-boot-spi-k2hk-evm.gph\0" -#define NAME_UBI "name_ubi=k2hk-evm-ubifs.ubi\0" +#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ + "addr_mon=0x0c5f0000\0" \ + "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \ + "name_fdt=uImage-k2hk-evm.dtb\0" \ + "name_mon=skern-k2hk-evm.bin\0" \ + "name_ubi=k2hk-evm-ubifs.ubi\0" \ + "name_uboot=u-boot-spi-k2hk-evm.gph\0" \ + "name_fs=arago-console-image-k2hk-evm.cpio.gz\0" #include <configs/ks2_evm.h> @@ -35,13 +36,7 @@ #define CONFIG_SYS_NAND_PAGE_2K /* Network */ -#define CONFIG_DRIVER_TI_KEYSTONE_NET -#define CONFIG_TI_KSNAV -#define CONFIG_KSNAV_PKTDMA_NETCP #define CONFIG_KSNET_NETCP_V1_0 #define CONFIG_KSNET_CPSW_NUM_PORTS 5 -/* SerDes */ -#define CONFIG_TI_KEYSTONE_SERDES - #endif /* __CONFIG_K2HK_EVM_H */ diff --git a/include/configs/k2l_evm.h b/include/configs/k2l_evm.h index 0e1f7251b3..805164a679 100644 --- a/include/configs/k2l_evm.h +++ b/include/configs/k2l_evm.h @@ -17,14 +17,15 @@ /* U-Boot general configuration */ #define CONFIG_SYS_PROMPT "K2L EVM # " -#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\ - "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,4096\0" - -#define KS2_FDT_NAME "name_fdt=k2l-evm.dtb\0" -#define KS2_ADDR_MON "addr_mon=0x0c140000\0" -#define KS2_NAME_MON "name_mon=skern-k2l-evm.bin\0" -#define NAME_UBOOT "name_uboot=u-boot-spi-k2l-evm.gph\0" -#define NAME_UBI "name_ubi=k2l-evm-ubifs.ubi\0" +#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ + "addr_mon=0x0c140000\0" \ + "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \ + "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,4096\0" \ + "name_fdt=uImage-k2l-evm.dtb\0" \ + "name_mon=skern-k2l-evm.bin\0" \ + "name_ubi=k2l-evm-ubifs.ubi\0" \ + "name_uboot=u-boot-spi-k2l-evm.gph\0" \ + "name_fs=arago-console-image-k2l-evm.cpio.gz\0" #include <configs/ks2_evm.h> @@ -34,4 +35,9 @@ /* NAND Configuration */ #define CONFIG_SYS_NAND_PAGE_4K +/* Network */ +#define CONFIG_KSNET_NETCP_V1_5 +#define CONFIG_KSNET_CPSW_NUM_PORTS 5 +#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE + #endif /* __CONFIG_K2L_EVM_H */ diff --git a/include/configs/koelsch.h b/include/configs/koelsch.h index e015e9091b..3ccadd0af7 100644 --- a/include/configs/koelsch.h +++ b/include/configs/koelsch.h @@ -38,7 +38,12 @@ #define CONFIG_FAT_WRITE #define CONFIG_EXT4_WRITE +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_TEXT_BASE 0x70000000 +#else #define CONFIG_SYS_TEXT_BASE 0xE6304000 +#endif + #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_GENERIC_BOARD @@ -69,8 +74,13 @@ #define CONFIG_TMU_TIMER /* STACK */ -#define CONFIG_SYS_INIT_SP_ADDR 0xE633fffc -#define STACK_AREA_SIZE 0xC000 +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC +#else +#define CONFIG_SYS_INIT_SP_ADDR 0xE633fffC +#endif + +#define STACK_AREA_SIZE 0xC000 #define LOW_LEVEL_MERAM_STACK \ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h index b0c91d8dcb..dd5050fbe9 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ks2_evm.h @@ -105,6 +105,7 @@ #define CONFIG_SYS_SGMII_RATESCALE 2 /* Keyston Navigator Configuration */ +#define CONFIG_TI_KSNAV #define CONFIG_KSNAV_QM_BASE_ADDRESS KS2_QM_BASE_ADDRESS #define CONFIG_KSNAV_QM_CONF_BASE KS2_QM_CONF_BASE #define CONFIG_KSNAV_QM_DESC_SETUP_BASE KS2_QM_DESC_SETUP_BASE @@ -121,6 +122,7 @@ #define CONFIG_KSNAV_QM_QPOOL_NUM KS2_QM_QPOOL_NUM /* NETCP pktdma */ +#define CONFIG_KSNAV_PKTDMA_NETCP #define CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE KS2_NETCP_PDMA_CTRL_BASE #define CONFIG_KSNAV_NETCP_PDMA_TX_BASE KS2_NETCP_PDMA_TX_BASE #define CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM KS2_NETCP_PDMA_TX_CH_NUM @@ -134,12 +136,16 @@ #define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE KS2_NETCP_PDMA_TX_SND_QUEUE /* Keystone net */ +#define CONFIG_DRIVER_TI_KEYSTONE_NET #define CONFIG_KSNET_MAC_ID_BASE KS2_MAC_ID_BASE_ADDR #define CONFIG_KSNET_NETCP_BASE KS2_NETCP_BASE #define CONFIG_KSNET_SERDES_SGMII_BASE KS2_SGMII_SERDES_BASE #define CONFIG_KSNET_SERDES_SGMII2_BASE KS2_SGMII_SERDES2_BASE #define CONFIG_KSNET_SERDES_LANES_PER_SGMII KS2_LANES_PER_SGMII_SERDES +/* SerDes */ +#define CONFIG_TI_KEYSTONE_SERDES + /* AEMIF */ #define CONFIG_TI_AEMIF #define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE @@ -218,6 +224,8 @@ #define CONFIG_CMD_SF #define CONFIG_CMD_EEPROM #define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* U-Boot general configuration */ #define CONFIG_SYS_GENERIC_BOARD @@ -239,30 +247,25 @@ #define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" #define CONFIG_EXTRA_ENV_SETTINGS \ - "boot=ramfs\0" \ + CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \ + "boot=ubi\0" \ "tftp_root=/\0" \ "nfs_root=/export\0" \ "mem_lpae=1\0" \ "mem_reserve=512M\0" \ "addr_fdt=0x87000000\0" \ "addr_kern=0x88000000\0" \ - KS2_ADDR_MON \ "addr_uboot=0x87000000\0" \ "addr_fs=0x82000000\0" \ "addr_ubi=0x82000000\0" \ "addr_secdb_key=0xc000000\0" \ "fdt_high=0xffffffff\0" \ - KS2_FDT_NAME \ - "name_fs=arago-console-image.cpio.gz\0" \ - "name_kern=uImage\0" \ - KS2_NAME_MON \ - NAME_UBOOT \ - NAME_UBI \ + "name_kern=uImage-keystone-evm.bin\0" \ "run_mon=mon_install ${addr_mon}\0" \ "run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \ "init_net=run args_all args_net\0" \ "init_ubi=run args_all args_ubi; " \ - "ubi part ubifs; ubifsmount boot;" \ + "ubi part ubifs; ubifsmount ubi:boot;" \ "ubifsload ${addr_secdb_key} securedb.key.bin;\0" \ "get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \ "get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \ @@ -276,7 +279,6 @@ "burn_uboot_nand=nand erase 0 0x100000; " \ "nand write ${addr_uboot} 0 ${filesize}\0" \ "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \ - KS2_ARGS_UBI \ "args_net=setenv bootargs ${bootargs} rootfstype=nfs " \ "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \ "${nfs_options} ip=dhcp\0" \ diff --git a/include/configs/lager.h b/include/configs/lager.h index 699135fc0e..a814b4cccc 100644 --- a/include/configs/lager.h +++ b/include/configs/lager.h @@ -39,7 +39,11 @@ #define CONFIG_FAT_WRITE #define CONFIG_EXT4_WRITE +#if defined(CONFIG_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_TEXT_BASE 0xB0000000 +#else #define CONFIG_SYS_TEXT_BASE 0xE8080000 +#endif #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_GENERIC_BOARD @@ -70,8 +74,12 @@ #define CONFIG_TMU_TIMER /* STACK */ -#define CONFIG_SYS_INIT_SP_ADDR 0xE827fffc -#define STACK_AREA_SIZE 0xC000 +#if defined(CONFIGF_RMOBILE_EXTRAM_BOOT) +#define CONFIG_SYS_INIT_SP_ADDR 0xB003FFFC +#else +#define CONFIG_SYS_INIT_SP_ADDR 0xE827FFFC +#endif +#define STACK_AREA_SIZE 0xC000 #define LOW_LEVEL_MERAM_STACK \ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4) diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index efe770b81b..5c209913e5 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -171,6 +171,7 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "consdev=ttyAMA0\0" \ "baudrate=115200\0" \ + "bootscript=boot.scr\0" \ "bootdev=/dev/mmcblk0p2\0" \ "rootdev=/dev/mmcblk0p3\0" \ "netdev=eth0\0" \ diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index 135a3f51f0..e0528ce4b9 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -29,5 +29,6 @@ #endif #define CONFIG_MP +#define CONFIG_MXC_GPT_HCLK #endif diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index 0ab31279cc..235dd6d33f 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -32,6 +32,9 @@ #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_PCA953X +#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x30, 8}, {0x32, 8}, {0x34, 8} } + #include "mx6sabre_common.h" #define CONFIG_SYS_FSL_USDHC_NUM 2 diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index fddedf1a8e..4fcaf515c7 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -190,7 +190,6 @@ #define CONFIG_ENV_OFFSET (6 * SZ_64K) #define CONFIG_ENV_SIZE SZ_8K #define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_OF_LIBFDT #define CONFIG_CMD_BOOTZ @@ -210,4 +209,9 @@ #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif +#define CONFIG_SYS_FSL_USDHC_NUM 3 +#if defined(CONFIG_ENV_IS_IN_MMC) +#define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC2*/ +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/novena.h b/include/configs/novena.h new file mode 100644 index 0000000000..879141a7ca --- /dev/null +++ b/include/configs/novena.h @@ -0,0 +1,298 @@ +/* + * Configuration settings for the Novena U-boot. + * + * Copyright (C) 2014 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* System configurations */ +#define CONFIG_MX6 +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DOS_PARTITION +#define CONFIG_FAT_WRITE +#define CONFIG_FIT +#define CONFIG_KEYBOARD +#define CONFIG_MXC_GPIO +#define CONFIG_OF_LIBFDT +#define CONFIG_REGEX +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SYS_NO_FLASH + +#include "configs/mx6_common.h" +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> +#include <config_cmd_default.h> + +/* U-Boot Commands */ +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_BOOTZ +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_I2C +#define CONFIG_CMD_FUSE +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_SATA +#define CONFIG_CMD_SETEXPR +#define CONFIG_CMD_TIME +#define CONFIG_CMD_USB +#define CONFIG_VIDEO + +/* U-Boot general configurations */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + /* Print buffer size */ +#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + /* Boot argument buffer size */ +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ +#define CONFIG_AUTO_COMPLETE /* Command auto complete */ +#define CONFIG_CMDLINE_EDITING /* Command history etc */ +#define CONFIG_SYS_HUSH_PARSER + +/* U-Boot environment */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_SIZE (16 * 1024) +/* + * Environment is on MMC, starting at offset 512KiB from start of the card. + * Please place first partition at offset 1MiB from the start of the card + * as recommended by GNU/fdisk. See below for details: + * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_OFFSET (512 * 1024) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_OFFSET_REDUND \ + (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#else +#define CONFIG_ENV_IS_NOWHERE +#endif + +/* Booting Linux */ +#define CONFIG_BOOTDELAY 5 +#define CONFIG_BOOTFILE "fitImage" +#define CONFIG_BOOTARGS "console=ttymxc1,115200 " +#define CONFIG_BOOTCOMMAND "run net_nfs" +#define CONFIG_LOADADDR 0x18000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_HOSTNAME novena + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE 0xF0000000 + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x20000000 + +#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024) + +/* SPL */ +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#include "imx6_spl.h" /* common IMX6 SPL configuration */ + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Ethernet Configuration */ +#ifdef CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 0x7 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 +#define CONFIG_ARP_TIMEOUT 200UL +#endif + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* I2C EEPROM */ +#ifdef CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_SPD_BUS_NUM 2 +#endif + +/* MMC Configs */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#endif + +/* OCOTP Configs */ +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif + +/* PCI express */ +#ifdef CONFIG_CMD_PCI +#define CONFIG_PCI +#define CONFIG_PCI_PNP +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_PCIE_IMX +#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29) +#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12) +#endif + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_PFUZE100 +#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 + +/* SATA Configs */ +#ifdef CONFIG_CMD_SATA +#define CONFIG_DWC_AHSATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR +#define CONFIG_LBA48 +#define CONFIG_LIBATA +#endif + +/* UART */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART2_BASE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_CONS_INDEX 1 + +/* USB Configs */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +/* Gadget part */ +#define CONFIG_CI_UDC +#define CONFIG_USBD_HS +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_CDC +#define CONFIG_NETCONSOLE +#endif + +/* Video output */ +#ifdef CONFIG_VIDEO +#define CONFIG_VIDEO +#define CONFIG_VIDEO_IPUV3 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_LOGO +#define CONFIG_IPUV3_CLK 260000000 +#define CONFIG_CMD_HDMIDETECT +#define CONFIG_CONSOLE_MUX +#define CONFIG_IMX_HDMI +#define CONFIG_IMX_VIDEO_SKIP +#endif + +/* Extra U-Boot environment. */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0xffffffff\0" \ + "initrd_high=0xffffffff\0" \ + "consdev=ttymxc1\0" \ + "baudrate=115200\0" \ + "bootdev=/dev/mmcblk0p1\0" \ + "rootdev=/dev/mmcblk0p2\0" \ + "netdev=eth0\0" \ + "kernel_addr_r=0x18000000\0" \ + "addcons=" \ + "setenv bootargs ${bootargs} " \ + "console=${consdev},${baudrate}\0" \ + "addip=" \ + "setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}:${netdev}:off\0" \ + "addmisc=" \ + "setenv bootargs ${bootargs} ${miscargs}\0" \ + "addargs=run addcons addmisc\0" \ + "mmcload=" \ + "mmc rescan ; " \ + "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \ + "netload=" \ + "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \ + "miscargs=nohlt panic=1\0" \ + "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \ + "nfsargs=" \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath},v3,tcp\0" \ + "mmc_mmc=" \ + "run mmcload mmcargs addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "mmc_nfs=" \ + "run mmcload nfsargs addip addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "net_mmc=" \ + "run netload mmcargs addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "net_nfs=" \ + "run netload nfsargs addip addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "update_sd_spl_filename=SPL\0" \ + "update_sd_uboot_filename=u-boot.img\0" \ + "update_sd_firmware=" /* Update the SD firmware partition */ \ + "if mmc rescan ; then " \ + "if dhcp ${update_sd_spl_filename} ; then " \ + "mmc write ${loadaddr} 2 0x200 ; " \ + "fi ; " \ + "if dhcp ${update_sd_uboot_filename} ; then " \ + "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\ + "fi ; " \ + "fi\0" \ + +#endif /* __CONFIG_H */ diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h index 183c449284..18388d150b 100644 --- a/include/configs/o2dnt-common.h +++ b/include/configs/o2dnt-common.h @@ -17,6 +17,8 @@ * High Level Configuration Options */ #define CONFIG_MPC5200 +#define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* running at 33.000000MHz */ diff --git a/include/configs/omap3_igep00x0.h b/include/configs/omap3_igep00x0.h index 006c9a9c0d..b2b3750c1e 100644 --- a/include/configs/omap3_igep00x0.h +++ b/include/configs/omap3_igep00x0.h @@ -29,8 +29,6 @@ #define CONFIG_REVISION_TAG 1 -#define CONFIG_SUPPORT_RAW_INITRD - /* define to enable boot progress via leds */ #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index f92496571b..1c04a58e9f 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -29,8 +29,6 @@ #endif #endif -#define CONFIG_SYS_LITTLE_ENDIAN - #define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ #define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ diff --git a/include/configs/ph1_ld4.h b/include/configs/ph1_ld4.h index 005a853f56..73a95e615e 100644 --- a/include/configs/ph1_ld4.h +++ b/include/configs/ph1_ld4.h @@ -37,8 +37,6 @@ #define CONFIG_DDR_NUM_CH0 1 #define CONFIG_DDR_NUM_CH1 1 -#define CONFIG_DDR_FREQ 1600 - /* * Memory Size & Mapping */ diff --git a/include/configs/ph1_pro4.h b/include/configs/ph1_pro4.h index 7dd6fd2a92..fc5132d1cc 100644 --- a/include/configs/ph1_pro4.h +++ b/include/configs/ph1_pro4.h @@ -37,8 +37,6 @@ #define CONFIG_DDR_NUM_CH0 2 #define CONFIG_DDR_NUM_CH1 2 -#define CONFIG_DDR_FREQ 1600 - #define CONFIG_UNIPHIER_SMP /* diff --git a/include/configs/ph1_sld8.h b/include/configs/ph1_sld8.h index 1062aace38..e2f1102003 100644 --- a/include/configs/ph1_sld8.h +++ b/include/configs/ph1_sld8.h @@ -37,8 +37,6 @@ #define CONFIG_DDR_NUM_CH0 1 #define CONFIG_DDR_NUM_CH1 1 -#define CONFIG_DDR_FREQ 1333 - /* #define CONFIG_DDR_STANDARD */ /* diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 3633a355bd..dfa2e07948 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -281,6 +281,7 @@ #define CONFIG_SYS_MAX_I2C_BUS 7 #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG +#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_CMD_USB_MASS_STORAGE diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 4b30d148c3..e7bace4345 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -181,6 +181,7 @@ #define CONFIG_USB_GADGET #define CONFIG_USB_GADGET_S3C_UDC_OTG +#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY #define CONFIG_USB_GADGET_DUALSPEED /* diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index a2469eb60c..655025c912 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -14,6 +14,7 @@ #undef CONFIG_BOARD_COMMON #undef CONFIG_USB_GADGET #undef CONFIG_USB_GADGET_S3C_UDC_OTG +#undef CONFIG_USB_GADGET_S3C_UDC_OTG_PHY #undef CONFIG_CMD_USB_MASS_STORAGE #undef CONFIG_REVISION_TAG #undef CONFIG_CMD_THOR_DOWNLOAD diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index c213082be0..c436fdaf52 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -37,7 +37,7 @@ */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 0x0 -#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024) #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 #define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE @@ -218,6 +218,34 @@ unsigned int cm_get_l4_sp_clk_hz(void); #endif /* + * USB Gadget (DFU, UMS) + */ +#if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_S3C_UDC_OTG +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_VBUS_DRAW 2 + +/* USB Composite download gadget - g_dnl */ +#define CONFIG_USBDOWNLOAD_GADGET +#define CONFIG_USB_GADGET_MASS_STORAGE + +#define CONFIG_DFU_FUNCTION +#define CONFIG_DFU_MMC +#define CONFIG_SYS_DFU_DATA_BUF_SIZE (32 * 1024 * 1024) +#define DFU_DEFAULT_POLL_TIMEOUT 300 + +/* USB IDs */ +#define CONFIG_G_DNL_VENDOR_NUM 0x0525 /* NetChip */ +#define CONFIG_G_DNL_PRODUCT_NUM 0xA4A5 /* Linux-USB File-backed Storage Gadget */ +#define CONFIG_G_DNL_UMS_VENDOR_NUM CONFIG_G_DNL_VENDOR_NUM +#define CONFIG_G_DNL_UMS_PRODUCT_NUM CONFIG_G_DNL_PRODUCT_NUM +#ifndef CONFIG_G_DNL_MANUFACTURER +#define CONFIG_G_DNL_MANUFACTURER "Altera" +#endif +#endif + +/* * U-Boot environment */ #define CONFIG_SYS_CONSOLE_IS_IN_ENV diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h index d0191a32b1..e0ec52dcde 100644 --- a/include/configs/sun4i.h +++ b/include/configs/sun4i.h @@ -11,7 +11,6 @@ /* * A10 specific configuration */ -#define CONFIG_SUN4I /* sun4i SoC generation */ #define CONFIG_CLK_FULL_SPEED 1008000000 #define CONFIG_SYS_PROMPT "sun4i# " diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h index 7b683e9c89..09f7533575 100644 --- a/include/configs/sun5i.h +++ b/include/configs/sun5i.h @@ -11,7 +11,6 @@ /* * High Level Configuration Options */ -#define CONFIG_SUN5I /* sun5i SoC generation */ #define CONFIG_CLK_FULL_SPEED 1008000000 #define CONFIG_SYS_PROMPT "sun5i# " diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index 93a1d965ca..b7144745c9 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -14,7 +14,6 @@ /* * A31 specific configuration */ -#define CONFIG_SUN6I /* sun6i SoC generation */ #define CONFIG_SYS_PROMPT "sun6i# " diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 966cbd8e83..0193826a9d 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -12,7 +12,6 @@ /* * A20 specific configuration */ -#define CONFIG_SUN7I /* sun7i SoC generation */ #define CONFIG_CLK_FULL_SPEED 912000000 #define CONFIG_SYS_PROMPT "sun7i# " diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index 1c1a7cde5e..6f1fc48cf0 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -12,7 +12,6 @@ /* * A23 specific configuration */ -#define CONFIG_SUN8I /* sun8i SoC generation */ #define CONFIG_SYS_PROMPT "sun8i# " /* diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index cc450e02e6..ce038eddf0 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -27,6 +27,14 @@ #define CONFIG_SYS_TEXT_BASE 0x4a000000 +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM) +# define CONFIG_CMD_DM +# define CONFIG_DM_GPIO +# define CONFIG_DM_SERIAL +# define CONFIG_DW_SERIAL +# define CONFIG_SYS_MALLOC_F_LEN (1 << 10) +#endif + /* * Display CPU information */ @@ -36,13 +44,15 @@ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL /* ns16550 reg in the low bits of cpu reg */ -#define CONFIG_SYS_NS16550_REG_SIZE -4 #define CONFIG_SYS_NS16550_CLK 24000000 -#define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE -#define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE -#define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE -#define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE -#define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE +#ifndef CONFIG_DM_SERIAL +# define CONFIG_SYS_NS16550_REG_SIZE -4 +# define CONFIG_SYS_NS16550_COM1 SUNXI_UART0_BASE +# define CONFIG_SYS_NS16550_COM2 SUNXI_UART1_BASE +# define CONFIG_SYS_NS16550_COM3 SUNXI_UART2_BASE +# define CONFIG_SYS_NS16550_COM4 SUNXI_UART3_BASE +# define CONFIG_SYS_NS16550_COM5 SUNXI_R_UART_BASE +#endif /* DRAM Base */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 4b9b629692..a8790c2f8f 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -174,6 +174,7 @@ #define CONFIG_CMD_ASKENV #define CONFIG_CMD_ECHO #define CONFIG_CMD_BOOTZ +#define CONFIG_SUPPORT_RAW_INITRD /* * Common filesystems support. When we have removable storage we diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h index d97a9613ae..c94eee19a2 100644 --- a/include/configs/tqma6.h +++ b/include/configs/tqma6.h @@ -9,13 +9,26 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_MX6 + +/* SPL */ +/* #if defined(CONFIG_SPL_BUILD) */ + +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_EXT_SUPPORT + +/* common IMX6 SPL configuration */ +#include "imx6_spl.h" + +/* #endif */ + #include "mx6_common.h" #include <asm/arch/imx-regs.h> #include <asm/imx-common/gpio.h> #include <linux/sizes.h> -#define CONFIG_MX6 - #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) #define PHYS_SDRAM_SIZE (512u * SZ_1M) #elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D) @@ -57,7 +70,7 @@ #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(3, 19) << 8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 50000000 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier-common.h index b18ae6dfae..7c4dba0387 100644 --- a/include/configs/uniphier-common.h +++ b/include/configs/uniphier-common.h @@ -43,7 +43,7 @@ are defined. Select only one of them." #define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE #define CONFIG_SMC911X_32_BIT -#define CONFIG_SYS_MALLOC_F_LEN 0x7000 +#define CONFIG_SYS_MALLOC_F_LEN 0x2000 /*----------------------------------------------------------------------- * MMU and Cache Setting @@ -166,6 +166,13 @@ are defined. Select only one of them." #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 +/* USB */ +#define CONFIG_CMD_USB +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_CMD_FAT +#define CONFIG_FAT_WRITE +#define CONFIG_DOS_PARTITION + /* memtest works on */ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) @@ -241,9 +248,9 @@ are defined. Select only one of them." #define CONFIG_SYS_TEXT_BASE 0x84000000 -#if defined(CONFIG_SPL_BUILD) #define CONFIG_BOARD_POSTCLK_INIT -#else + +#ifndef CONFIG_SPL_BUILD #define CONFIG_SKIP_LOWLEVEL_INIT #endif diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 9fb501a341..809017c5fe 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -78,6 +78,15 @@ #define CONFIG_CMD_FAT #define CONFIG_DOS_PARTITION +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + /* Ethernet Configuration */ #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP diff --git a/include/dt-bindings/input/input.h b/include/dt-bindings/input/input.h new file mode 100644 index 0000000000..042e7b3b62 --- /dev/null +++ b/include/dt-bindings/input/input.h @@ -0,0 +1,525 @@ +/* + * This header provides constants for most input bindings. + * + * Most input bindings include key code, matrix key code format. + * In most cases, key code and matrix key code format uses + * the standard values/macro defined in this header. + */ + +#ifndef _DT_BINDINGS_INPUT_INPUT_H +#define _DT_BINDINGS_INPUT_INPUT_H + +#define KEY_RESERVED 0 +#define KEY_ESC 1 +#define KEY_1 2 +#define KEY_2 3 +#define KEY_3 4 +#define KEY_4 5 +#define KEY_5 6 +#define KEY_6 7 +#define KEY_7 8 +#define KEY_8 9 +#define KEY_9 10 +#define KEY_0 11 +#define KEY_MINUS 12 +#define KEY_EQUAL 13 +#define KEY_BACKSPACE 14 +#define KEY_TAB 15 +#define KEY_Q 16 +#define KEY_W 17 +#define KEY_E 18 +#define KEY_R 19 +#define KEY_T 20 +#define KEY_Y 21 +#define KEY_U 22 +#define KEY_I 23 +#define KEY_O 24 +#define KEY_P 25 +#define KEY_LEFTBRACE 26 +#define KEY_RIGHTBRACE 27 +#define KEY_ENTER 28 +#define KEY_LEFTCTRL 29 +#define KEY_A 30 +#define KEY_S 31 +#define KEY_D 32 +#define KEY_F 33 +#define KEY_G 34 +#define KEY_H 35 +#define KEY_J 36 +#define KEY_K 37 +#define KEY_L 38 +#define KEY_SEMICOLON 39 +#define KEY_APOSTROPHE 40 +#define KEY_GRAVE 41 +#define KEY_LEFTSHIFT 42 +#define KEY_BACKSLASH 43 +#define KEY_Z 44 +#define KEY_X 45 +#define KEY_C 46 +#define KEY_V 47 +#define KEY_B 48 +#define KEY_N 49 +#define KEY_M 50 +#define KEY_COMMA 51 +#define KEY_DOT 52 +#define KEY_SLASH 53 +#define KEY_RIGHTSHIFT 54 +#define KEY_KPASTERISK 55 +#define KEY_LEFTALT 56 +#define KEY_SPACE 57 +#define KEY_CAPSLOCK 58 +#define KEY_F1 59 +#define KEY_F2 60 +#define KEY_F3 61 +#define KEY_F4 62 +#define KEY_F5 63 +#define KEY_F6 64 +#define KEY_F7 65 +#define KEY_F8 66 +#define KEY_F9 67 +#define KEY_F10 68 +#define KEY_NUMLOCK 69 +#define KEY_SCROLLLOCK 70 +#define KEY_KP7 71 +#define KEY_KP8 72 +#define KEY_KP9 73 +#define KEY_KPMINUS 74 +#define KEY_KP4 75 +#define KEY_KP5 76 +#define KEY_KP6 77 +#define KEY_KPPLUS 78 +#define KEY_KP1 79 +#define KEY_KP2 80 +#define KEY_KP3 81 +#define KEY_KP0 82 +#define KEY_KPDOT 83 + +#define KEY_ZENKAKUHANKAKU 85 +#define KEY_102ND 86 +#define KEY_F11 87 +#define KEY_F12 88 +#define KEY_RO 89 +#define KEY_KATAKANA 90 +#define KEY_HIRAGANA 91 +#define KEY_HENKAN 92 +#define KEY_KATAKANAHIRAGANA 93 +#define KEY_MUHENKAN 94 +#define KEY_KPJPCOMMA 95 +#define KEY_KPENTER 96 +#define KEY_RIGHTCTRL 97 +#define KEY_KPSLASH 98 +#define KEY_SYSRQ 99 +#define KEY_RIGHTALT 100 +#define KEY_LINEFEED 101 +#define KEY_HOME 102 +#define KEY_UP 103 +#define KEY_PAGEUP 104 +#define KEY_LEFT 105 +#define KEY_RIGHT 106 +#define KEY_END 107 +#define KEY_DOWN 108 +#define KEY_PAGEDOWN 109 +#define KEY_INSERT 110 +#define KEY_DELETE 111 +#define KEY_MACRO 112 +#define KEY_MUTE 113 +#define KEY_VOLUMEDOWN 114 +#define KEY_VOLUMEUP 115 +#define KEY_POWER 116 /* SC System Power Down */ +#define KEY_KPEQUAL 117 +#define KEY_KPPLUSMINUS 118 +#define KEY_PAUSE 119 +#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */ + +#define KEY_KPCOMMA 121 +#define KEY_HANGEUL 122 +#define KEY_HANGUEL KEY_HANGEUL +#define KEY_HANJA 123 +#define KEY_YEN 124 +#define KEY_LEFTMETA 125 +#define KEY_RIGHTMETA 126 +#define KEY_COMPOSE 127 + +#define KEY_STOP 128 /* AC Stop */ +#define KEY_AGAIN 129 +#define KEY_PROPS 130 /* AC Properties */ +#define KEY_UNDO 131 /* AC Undo */ +#define KEY_FRONT 132 +#define KEY_COPY 133 /* AC Copy */ +#define KEY_OPEN 134 /* AC Open */ +#define KEY_PASTE 135 /* AC Paste */ +#define KEY_FIND 136 /* AC Search */ +#define KEY_CUT 137 /* AC Cut */ +#define KEY_HELP 138 /* AL Integrated Help Center */ +#define KEY_MENU 139 /* Menu (show menu) */ +#define KEY_CALC 140 /* AL Calculator */ +#define KEY_SETUP 141 +#define KEY_SLEEP 142 /* SC System Sleep */ +#define KEY_WAKEUP 143 /* System Wake Up */ +#define KEY_FILE 144 /* AL Local Machine Browser */ +#define KEY_SENDFILE 145 +#define KEY_DELETEFILE 146 +#define KEY_XFER 147 +#define KEY_PROG1 148 +#define KEY_PROG2 149 +#define KEY_WWW 150 /* AL Internet Browser */ +#define KEY_MSDOS 151 +#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */ +#define KEY_SCREENLOCK KEY_COFFEE +#define KEY_DIRECTION 153 +#define KEY_CYCLEWINDOWS 154 +#define KEY_MAIL 155 +#define KEY_BOOKMARKS 156 /* AC Bookmarks */ +#define KEY_COMPUTER 157 +#define KEY_BACK 158 /* AC Back */ +#define KEY_FORWARD 159 /* AC Forward */ +#define KEY_CLOSECD 160 +#define KEY_EJECTCD 161 +#define KEY_EJECTCLOSECD 162 +#define KEY_NEXTSONG 163 +#define KEY_PLAYPAUSE 164 +#define KEY_PREVIOUSSONG 165 +#define KEY_STOPCD 166 +#define KEY_RECORD 167 +#define KEY_REWIND 168 +#define KEY_PHONE 169 /* Media Select Telephone */ +#define KEY_ISO 170 +#define KEY_CONFIG 171 /* AL Consumer Control Configuration */ +#define KEY_HOMEPAGE 172 /* AC Home */ +#define KEY_REFRESH 173 /* AC Refresh */ +#define KEY_EXIT 174 /* AC Exit */ +#define KEY_MOVE 175 +#define KEY_EDIT 176 +#define KEY_SCROLLUP 177 +#define KEY_SCROLLDOWN 178 +#define KEY_KPLEFTPAREN 179 +#define KEY_KPRIGHTPAREN 180 +#define KEY_NEW 181 /* AC New */ +#define KEY_REDO 182 /* AC Redo/Repeat */ + +#define KEY_F13 183 +#define KEY_F14 184 +#define KEY_F15 185 +#define KEY_F16 186 +#define KEY_F17 187 +#define KEY_F18 188 +#define KEY_F19 189 +#define KEY_F20 190 +#define KEY_F21 191 +#define KEY_F22 192 +#define KEY_F23 193 +#define KEY_F24 194 + +#define KEY_PLAYCD 200 +#define KEY_PAUSECD 201 +#define KEY_PROG3 202 +#define KEY_PROG4 203 +#define KEY_DASHBOARD 204 /* AL Dashboard */ +#define KEY_SUSPEND 205 +#define KEY_CLOSE 206 /* AC Close */ +#define KEY_PLAY 207 +#define KEY_FASTFORWARD 208 +#define KEY_BASSBOOST 209 +#define KEY_PRINT 210 /* AC Print */ +#define KEY_HP 211 +#define KEY_CAMERA 212 +#define KEY_SOUND 213 +#define KEY_QUESTION 214 +#define KEY_EMAIL 215 +#define KEY_CHAT 216 +#define KEY_SEARCH 217 +#define KEY_CONNECT 218 +#define KEY_FINANCE 219 /* AL Checkbook/Finance */ +#define KEY_SPORT 220 +#define KEY_SHOP 221 +#define KEY_ALTERASE 222 +#define KEY_CANCEL 223 /* AC Cancel */ +#define KEY_BRIGHTNESSDOWN 224 +#define KEY_BRIGHTNESSUP 225 +#define KEY_MEDIA 226 + +#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video + outputs (Monitor/LCD/TV-out/etc) */ +#define KEY_KBDILLUMTOGGLE 228 +#define KEY_KBDILLUMDOWN 229 +#define KEY_KBDILLUMUP 230 + +#define KEY_SEND 231 /* AC Send */ +#define KEY_REPLY 232 /* AC Reply */ +#define KEY_FORWARDMAIL 233 /* AC Forward Msg */ +#define KEY_SAVE 234 /* AC Save */ +#define KEY_DOCUMENTS 235 + +#define KEY_BATTERY 236 + +#define KEY_BLUETOOTH 237 +#define KEY_WLAN 238 +#define KEY_UWB 239 + +#define KEY_UNKNOWN 240 + +#define KEY_VIDEO_NEXT 241 /* drive next video source */ +#define KEY_VIDEO_PREV 242 /* drive previous video source */ +#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */ +#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */ +#define KEY_DISPLAY_OFF 245 /* display device to off state */ + +#define KEY_WIMAX 246 +#define KEY_RFKILL 247 /* Key that controls all radios */ + +#define KEY_MICMUTE 248 /* Mute / unmute the microphone */ + +/* Code 255 is reserved for special needs of AT keyboard driver */ + +#define BTN_MISC 0x100 +#define BTN_0 0x100 +#define BTN_1 0x101 +#define BTN_2 0x102 +#define BTN_3 0x103 +#define BTN_4 0x104 +#define BTN_5 0x105 +#define BTN_6 0x106 +#define BTN_7 0x107 +#define BTN_8 0x108 +#define BTN_9 0x109 + +#define BTN_MOUSE 0x110 +#define BTN_LEFT 0x110 +#define BTN_RIGHT 0x111 +#define BTN_MIDDLE 0x112 +#define BTN_SIDE 0x113 +#define BTN_EXTRA 0x114 +#define BTN_FORWARD 0x115 +#define BTN_BACK 0x116 +#define BTN_TASK 0x117 + +#define BTN_JOYSTICK 0x120 +#define BTN_TRIGGER 0x120 +#define BTN_THUMB 0x121 +#define BTN_THUMB2 0x122 +#define BTN_TOP 0x123 +#define BTN_TOP2 0x124 +#define BTN_PINKIE 0x125 +#define BTN_BASE 0x126 +#define BTN_BASE2 0x127 +#define BTN_BASE3 0x128 +#define BTN_BASE4 0x129 +#define BTN_BASE5 0x12a +#define BTN_BASE6 0x12b +#define BTN_DEAD 0x12f + +#define BTN_GAMEPAD 0x130 +#define BTN_SOUTH 0x130 +#define BTN_A BTN_SOUTH +#define BTN_EAST 0x131 +#define BTN_B BTN_EAST +#define BTN_C 0x132 +#define BTN_NORTH 0x133 +#define BTN_X BTN_NORTH +#define BTN_WEST 0x134 +#define BTN_Y BTN_WEST +#define BTN_Z 0x135 +#define BTN_TL 0x136 +#define BTN_TR 0x137 +#define BTN_TL2 0x138 +#define BTN_TR2 0x139 +#define BTN_SELECT 0x13a +#define BTN_START 0x13b +#define BTN_MODE 0x13c +#define BTN_THUMBL 0x13d +#define BTN_THUMBR 0x13e + +#define BTN_DIGI 0x140 +#define BTN_TOOL_PEN 0x140 +#define BTN_TOOL_RUBBER 0x141 +#define BTN_TOOL_BRUSH 0x142 +#define BTN_TOOL_PENCIL 0x143 +#define BTN_TOOL_AIRBRUSH 0x144 +#define BTN_TOOL_FINGER 0x145 +#define BTN_TOOL_MOUSE 0x146 +#define BTN_TOOL_LENS 0x147 +#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */ +#define BTN_TOUCH 0x14a +#define BTN_STYLUS 0x14b +#define BTN_STYLUS2 0x14c +#define BTN_TOOL_DOUBLETAP 0x14d +#define BTN_TOOL_TRIPLETAP 0x14e +#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ + +#define BTN_WHEEL 0x150 +#define BTN_GEAR_DOWN 0x150 +#define BTN_GEAR_UP 0x151 + +#define KEY_OK 0x160 +#define KEY_SELECT 0x161 +#define KEY_GOTO 0x162 +#define KEY_CLEAR 0x163 +#define KEY_POWER2 0x164 +#define KEY_OPTION 0x165 +#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */ +#define KEY_TIME 0x167 +#define KEY_VENDOR 0x168 +#define KEY_ARCHIVE 0x169 +#define KEY_PROGRAM 0x16a /* Media Select Program Guide */ +#define KEY_CHANNEL 0x16b +#define KEY_FAVORITES 0x16c +#define KEY_EPG 0x16d +#define KEY_PVR 0x16e /* Media Select Home */ +#define KEY_MHP 0x16f +#define KEY_LANGUAGE 0x170 +#define KEY_TITLE 0x171 +#define KEY_SUBTITLE 0x172 +#define KEY_ANGLE 0x173 +#define KEY_ZOOM 0x174 +#define KEY_MODE 0x175 +#define KEY_KEYBOARD 0x176 +#define KEY_SCREEN 0x177 +#define KEY_PC 0x178 /* Media Select Computer */ +#define KEY_TV 0x179 /* Media Select TV */ +#define KEY_TV2 0x17a /* Media Select Cable */ +#define KEY_VCR 0x17b /* Media Select VCR */ +#define KEY_VCR2 0x17c /* VCR Plus */ +#define KEY_SAT 0x17d /* Media Select Satellite */ +#define KEY_SAT2 0x17e +#define KEY_CD 0x17f /* Media Select CD */ +#define KEY_TAPE 0x180 /* Media Select Tape */ +#define KEY_RADIO 0x181 +#define KEY_TUNER 0x182 /* Media Select Tuner */ +#define KEY_PLAYER 0x183 +#define KEY_TEXT 0x184 +#define KEY_DVD 0x185 /* Media Select DVD */ +#define KEY_AUX 0x186 +#define KEY_MP3 0x187 +#define KEY_AUDIO 0x188 /* AL Audio Browser */ +#define KEY_VIDEO 0x189 /* AL Movie Browser */ +#define KEY_DIRECTORY 0x18a +#define KEY_LIST 0x18b +#define KEY_MEMO 0x18c /* Media Select Messages */ +#define KEY_CALENDAR 0x18d +#define KEY_RED 0x18e +#define KEY_GREEN 0x18f +#define KEY_YELLOW 0x190 +#define KEY_BLUE 0x191 +#define KEY_CHANNELUP 0x192 /* Channel Increment */ +#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */ +#define KEY_FIRST 0x194 +#define KEY_LAST 0x195 /* Recall Last */ +#define KEY_AB 0x196 +#define KEY_NEXT 0x197 +#define KEY_RESTART 0x198 +#define KEY_SLOW 0x199 +#define KEY_SHUFFLE 0x19a +#define KEY_BREAK 0x19b +#define KEY_PREVIOUS 0x19c +#define KEY_DIGITS 0x19d +#define KEY_TEEN 0x19e +#define KEY_TWEN 0x19f +#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */ +#define KEY_GAMES 0x1a1 /* Media Select Games */ +#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */ +#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */ +#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */ +#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */ +#define KEY_EDITOR 0x1a6 /* AL Text Editor */ +#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */ +#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */ +#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */ +#define KEY_DATABASE 0x1aa /* AL Database App */ +#define KEY_NEWS 0x1ab /* AL Newsreader */ +#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */ +#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */ +#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */ +#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */ +#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */ +#define KEY_LOGOFF 0x1b1 /* AL Logoff */ + +#define KEY_DOLLAR 0x1b2 +#define KEY_EURO 0x1b3 + +#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ +#define KEY_FRAMEFORWARD 0x1b5 +#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ +#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ +#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */ +#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */ +#define KEY_IMAGES 0x1ba /* AL Image Browser */ + +#define KEY_DEL_EOL 0x1c0 +#define KEY_DEL_EOS 0x1c1 +#define KEY_INS_LINE 0x1c2 +#define KEY_DEL_LINE 0x1c3 + +#define KEY_FN 0x1d0 +#define KEY_FN_ESC 0x1d1 +#define KEY_FN_F1 0x1d2 +#define KEY_FN_F2 0x1d3 +#define KEY_FN_F3 0x1d4 +#define KEY_FN_F4 0x1d5 +#define KEY_FN_F5 0x1d6 +#define KEY_FN_F6 0x1d7 +#define KEY_FN_F7 0x1d8 +#define KEY_FN_F8 0x1d9 +#define KEY_FN_F9 0x1da +#define KEY_FN_F10 0x1db +#define KEY_FN_F11 0x1dc +#define KEY_FN_F12 0x1dd +#define KEY_FN_1 0x1de +#define KEY_FN_2 0x1df +#define KEY_FN_D 0x1e0 +#define KEY_FN_E 0x1e1 +#define KEY_FN_F 0x1e2 +#define KEY_FN_S 0x1e3 +#define KEY_FN_B 0x1e4 + +#define KEY_BRL_DOT1 0x1f1 +#define KEY_BRL_DOT2 0x1f2 +#define KEY_BRL_DOT3 0x1f3 +#define KEY_BRL_DOT4 0x1f4 +#define KEY_BRL_DOT5 0x1f5 +#define KEY_BRL_DOT6 0x1f6 +#define KEY_BRL_DOT7 0x1f7 +#define KEY_BRL_DOT8 0x1f8 +#define KEY_BRL_DOT9 0x1f9 +#define KEY_BRL_DOT10 0x1fa + +#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */ +#define KEY_NUMERIC_1 0x201 /* and other keypads */ +#define KEY_NUMERIC_2 0x202 +#define KEY_NUMERIC_3 0x203 +#define KEY_NUMERIC_4 0x204 +#define KEY_NUMERIC_5 0x205 +#define KEY_NUMERIC_6 0x206 +#define KEY_NUMERIC_7 0x207 +#define KEY_NUMERIC_8 0x208 +#define KEY_NUMERIC_9 0x209 +#define KEY_NUMERIC_STAR 0x20a +#define KEY_NUMERIC_POUND 0x20b + +#define KEY_CAMERA_FOCUS 0x210 +#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */ + +#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */ +#define KEY_TOUCHPAD_ON 0x213 +#define KEY_TOUCHPAD_OFF 0x214 + +#define KEY_CAMERA_ZOOMIN 0x215 +#define KEY_CAMERA_ZOOMOUT 0x216 +#define KEY_CAMERA_UP 0x217 +#define KEY_CAMERA_DOWN 0x218 +#define KEY_CAMERA_LEFT 0x219 +#define KEY_CAMERA_RIGHT 0x21a + +#define KEY_ATTENDANT_ON 0x21b +#define KEY_ATTENDANT_OFF 0x21c +#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */ +#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */ + +#define BTN_DPAD_UP 0x220 +#define BTN_DPAD_DOWN 0x221 +#define BTN_DPAD_LEFT 0x222 +#define BTN_DPAD_RIGHT 0x223 + +#define MATRIX_KEY(row, col, code) \ + ((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF)) + +#endif /* _DT_BINDINGS_INPUT_INPUT_H */ diff --git a/include/image.h b/include/image.h index a13a30289f..07e9aed16d 100644 --- a/include/image.h +++ b/include/image.h @@ -173,6 +173,7 @@ struct lmb; #define IH_ARCH_OPENRISC 21 /* OpenRISC 1000 */ #define IH_ARCH_ARM64 22 /* ARM64 */ #define IH_ARCH_ARC 23 /* Synopsys DesignWare ARC */ +#define IH_ARCH_X86_64 24 /* AMD x86_64, Intel and Via */ /* * Image Types diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h new file mode 100644 index 0000000000..9214b67b11 --- /dev/null +++ b/include/linux/serial_reg.h @@ -0,0 +1,388 @@ +/* + * include/linux/serial_reg.h + * + * Copyright (C) 1992, 1994 by Theodore Ts'o. + * + * SPDX-License-Identifier: GPL-2.0+ + * + * These are the UART port assignments, expressed as offsets from the base + * register. These assignments should hold for any serial port based on + * a 8250, 16450, or 16550(A). + */ + +#ifndef _LINUX_SERIAL_REG_H +#define _LINUX_SERIAL_REG_H + +/* + * DLAB=0 + */ +#define UART_RX 0 /* In: Receive buffer */ +#define UART_TX 0 /* Out: Transmit buffer */ + +#define UART_IER 1 /* Out: Interrupt Enable Register */ +#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ +#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ +#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ +#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ +/* + * Sleep mode for ST16650 and TI16750. For the ST16650, EFR[4]=1 + */ +#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */ + +#define UART_IIR 2 /* In: Interrupt ID Register */ +#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ +#define UART_IIR_ID 0x0e /* Mask for the interrupt ID */ +#define UART_IIR_MSI 0x00 /* Modem status interrupt */ +#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ +#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ +#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ + +#define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */ + +#define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */ +#define UART_IIR_XOFF 0x10 /* OMAP XOFF/Special Character */ +#define UART_IIR_CTS_RTS_DSR 0x20 /* OMAP CTS/RTS/DSR Change */ + +#define UART_FCR 2 /* Out: FIFO Control Register */ +#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ +#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ +#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ +#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ +/* + * Note: The FIFO trigger levels are chip specific: + * RX:76 = 00 01 10 11 TX:54 = 00 01 10 11 + * PC16550D: 1 4 8 14 xx xx xx xx + * TI16C550A: 1 4 8 14 xx xx xx xx + * TI16C550C: 1 4 8 14 xx xx xx xx + * ST16C550: 1 4 8 14 xx xx xx xx + * ST16C650: 8 16 24 28 16 8 24 30 PORT_16650V2 + * NS16C552: 1 4 8 14 xx xx xx xx + * ST16C654: 8 16 56 60 8 16 32 56 PORT_16654 + * TI16C750: 1 16 32 56 xx xx xx xx PORT_16750 + * TI16C752: 8 16 56 60 8 16 32 56 + * Tegra: 1 4 8 14 16 8 4 1 PORT_TEGRA + */ +#define UART_FCR_R_TRIG_00 0x00 +#define UART_FCR_R_TRIG_01 0x40 +#define UART_FCR_R_TRIG_10 0x80 +#define UART_FCR_R_TRIG_11 0xc0 +#define UART_FCR_T_TRIG_00 0x00 +#define UART_FCR_T_TRIG_01 0x10 +#define UART_FCR_T_TRIG_10 0x20 +#define UART_FCR_T_TRIG_11 0x30 + +#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ +#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ +#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ +#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ +#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ +/* 16650 definitions */ +#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */ +#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */ +#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */ +#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */ +#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */ +#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */ +#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */ +#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */ +#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */ + +#define UART_LCR 3 /* Out: Line Control Register */ +/* + * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting + * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. + */ +#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ +#define UART_LCR_SBC 0x40 /* Set break control */ +#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ +#define UART_LCR_EPAR 0x10 /* Even parity select */ +#define UART_LCR_PARITY 0x08 /* Parity Enable */ +#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 bit, 1=2 bits */ +#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ +#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ +#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ +#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ + +/* + * Access to some registers depends on register access / configuration + * mode. + */ +#define UART_LCR_CONF_MODE_A UART_LCR_DLAB /* Configutation mode A */ +#define UART_LCR_CONF_MODE_B 0xBF /* Configutation mode B */ + +#define UART_MCR 4 /* Out: Modem Control Register */ +#define UART_MCR_CLKSEL 0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */ +#define UART_MCR_TCRTLR 0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */ +#define UART_MCR_XONANY 0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */ +#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */ +#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ +#define UART_MCR_OUT2 0x08 /* Out2 complement */ +#define UART_MCR_OUT1 0x04 /* Out1 complement */ +#define UART_MCR_RTS 0x02 /* RTS complement */ +#define UART_MCR_DTR 0x01 /* DTR complement */ + +#define UART_LSR 5 /* In: Line Status Register */ +#define UART_LSR_FIFOE 0x80 /* Fifo error */ +#define UART_LSR_TEMT 0x40 /* Transmitter empty */ +#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ +#define UART_LSR_BI 0x10 /* Break interrupt indicator */ +#define UART_LSR_FE 0x08 /* Frame error indicator */ +#define UART_LSR_PE 0x04 /* Parity error indicator */ +#define UART_LSR_OE 0x02 /* Overrun error indicator */ +#define UART_LSR_DR 0x01 /* Receiver data ready */ +#define UART_LSR_BRK_ERROR_BITS 0x1E /* BI, FE, PE, OE bits */ + +#define UART_MSR 6 /* In: Modem Status Register */ +#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ +#define UART_MSR_RI 0x40 /* Ring Indicator */ +#define UART_MSR_DSR 0x20 /* Data Set Ready */ +#define UART_MSR_CTS 0x10 /* Clear to Send */ +#define UART_MSR_DDCD 0x08 /* Delta DCD */ +#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ +#define UART_MSR_DDSR 0x02 /* Delta DSR */ +#define UART_MSR_DCTS 0x01 /* Delta CTS */ +#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ + +#define UART_SCR 7 /* I/O: Scratch Register */ + +/* + * DLAB=1 + */ +#define UART_DLL 0 /* Out: Divisor Latch Low */ +#define UART_DLM 1 /* Out: Divisor Latch High */ + +/* + * LCR=0xBF (or DLAB=1 for 16C660) + */ +#define UART_EFR 2 /* I/O: Extended Features Register */ +#define UART_XR_EFR 9 /* I/O: Extended Features Register (XR17D15x) */ +#define UART_EFR_CTS 0x80 /* CTS flow control */ +#define UART_EFR_RTS 0x40 /* RTS flow control */ +#define UART_EFR_SCD 0x20 /* Special character detect */ +#define UART_EFR_ECB 0x10 /* Enhanced control bit */ +/* + * the low four bits control software flow control + */ + +/* + * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654 + */ +#define UART_XON1 4 /* I/O: Xon character 1 */ +#define UART_XON2 5 /* I/O: Xon character 2 */ +#define UART_XOFF1 6 /* I/O: Xoff character 1 */ +#define UART_XOFF2 7 /* I/O: Xoff character 2 */ + +/* + * EFR[4]=1 MCR[6]=1, TI16C752 + */ +#define UART_TI752_TCR 6 /* I/O: transmission control register */ +#define UART_TI752_TLR 7 /* I/O: trigger level register */ + +/* + * LCR=0xBF, XR16C85x + */ +#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx + * In: Fifo count + * Out: Fifo custom trigger levels */ +/* + * These are the definitions for the Programmable Trigger Register + */ +#define UART_TRG_1 0x01 +#define UART_TRG_4 0x04 +#define UART_TRG_8 0x08 +#define UART_TRG_16 0x10 +#define UART_TRG_32 0x20 +#define UART_TRG_64 0x40 +#define UART_TRG_96 0x60 +#define UART_TRG_120 0x78 +#define UART_TRG_128 0x80 + +#define UART_FCTR 1 /* Feature Control Register */ +#define UART_FCTR_RTS_NODELAY 0x00 /* RTS flow control delay */ +#define UART_FCTR_RTS_4DELAY 0x01 +#define UART_FCTR_RTS_6DELAY 0x02 +#define UART_FCTR_RTS_8DELAY 0x03 +#define UART_FCTR_IRDA 0x04 /* IrDa data encode select */ +#define UART_FCTR_TX_INT 0x08 /* Tx interrupt type select */ +#define UART_FCTR_TRGA 0x00 /* Tx/Rx 550 trigger table select */ +#define UART_FCTR_TRGB 0x10 /* Tx/Rx 650 trigger table select */ +#define UART_FCTR_TRGC 0x20 /* Tx/Rx 654 trigger table select */ +#define UART_FCTR_TRGD 0x30 /* Tx/Rx 850 programmable trigger select */ +#define UART_FCTR_SCR_SWAP 0x40 /* Scratch pad register swap */ +#define UART_FCTR_RX 0x00 /* Programmable trigger mode select */ +#define UART_FCTR_TX 0x80 /* Programmable trigger mode select */ + +/* + * LCR=0xBF, FCTR[6]=1 + */ +#define UART_EMSR 7 /* Extended Mode Select Register */ +#define UART_EMSR_FIFO_COUNT 0x01 /* Rx/Tx select */ +#define UART_EMSR_ALT_COUNT 0x02 /* Alternating count select */ + +/* + * The Intel XScale on-chip UARTs define these bits + */ +#define UART_IER_DMAE 0x80 /* DMA Requests Enable */ +#define UART_IER_UUE 0x40 /* UART Unit Enable */ +#define UART_IER_NRZE 0x20 /* NRZ coding Enable */ +#define UART_IER_RTOIE 0x10 /* Receiver Time Out Interrupt Enable */ + +#define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */ + +#define UART_FCR_PXAR1 0x00 /* receive FIFO threshold = 1 */ +#define UART_FCR_PXAR8 0x40 /* receive FIFO threshold = 8 */ +#define UART_FCR_PXAR16 0x80 /* receive FIFO threshold = 16 */ +#define UART_FCR_PXAR32 0xc0 /* receive FIFO threshold = 32 */ + +/* + * Intel MID on-chip HSU (High Speed UART) defined bits + */ +#define UART_FCR_HSU_64_1B 0x00 /* receive FIFO treshold = 1 */ +#define UART_FCR_HSU_64_16B 0x40 /* receive FIFO treshold = 16 */ +#define UART_FCR_HSU_64_32B 0x80 /* receive FIFO treshold = 32 */ +#define UART_FCR_HSU_64_56B 0xc0 /* receive FIFO treshold = 56 */ + +#define UART_FCR_HSU_16_1B 0x00 /* receive FIFO treshold = 1 */ +#define UART_FCR_HSU_16_4B 0x40 /* receive FIFO treshold = 4 */ +#define UART_FCR_HSU_16_8B 0x80 /* receive FIFO treshold = 8 */ +#define UART_FCR_HSU_16_14B 0xc0 /* receive FIFO treshold = 14 */ + +#define UART_FCR_HSU_64B_FIFO 0x20 /* chose 64 bytes FIFO */ +#define UART_FCR_HSU_16B_FIFO 0x00 /* chose 16 bytes FIFO */ + +#define UART_FCR_HALF_EMPT_TXI 0x00 /* trigger TX_EMPT IRQ for half empty */ +#define UART_FCR_FULL_EMPT_TXI 0x08 /* trigger TX_EMPT IRQ for full empty */ + +/* + * These register definitions are for the 16C950 + */ +#define UART_ASR 0x01 /* Additional Status Register */ +#define UART_RFL 0x03 /* Receiver FIFO level */ +#define UART_TFL 0x04 /* Transmitter FIFO level */ +#define UART_ICR 0x05 /* Index Control Register */ + +/* The 16950 ICR registers */ +#define UART_ACR 0x00 /* Additional Control Register */ +#define UART_CPR 0x01 /* Clock Prescalar Register */ +#define UART_TCR 0x02 /* Times Clock Register */ +#define UART_CKS 0x03 /* Clock Select Register */ +#define UART_TTL 0x04 /* Transmitter Interrupt Trigger Level */ +#define UART_RTL 0x05 /* Receiver Interrupt Trigger Level */ +#define UART_FCL 0x06 /* Flow Control Level Lower */ +#define UART_FCH 0x07 /* Flow Control Level Higher */ +#define UART_ID1 0x08 /* ID #1 */ +#define UART_ID2 0x09 /* ID #2 */ +#define UART_ID3 0x0A /* ID #3 */ +#define UART_REV 0x0B /* Revision */ +#define UART_CSR 0x0C /* Channel Software Reset */ +#define UART_NMR 0x0D /* Nine-bit Mode Register */ +#define UART_CTR 0xFF + +/* + * The 16C950 Additional Control Register + */ +#define UART_ACR_RXDIS 0x01 /* Receiver disable */ +#define UART_ACR_TXDIS 0x02 /* Transmitter disable */ +#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */ +#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */ +#define UART_ACR_ICRRD 0x40 /* ICR Read enable */ +#define UART_ACR_ASREN 0x80 /* Additional status enable */ + + + +/* + * These definitions are for the RSA-DV II/S card, from + * + * Kiyokazu SUTO <suto@ks-and-ks.ne.jp> + */ + +#define UART_RSA_BASE (-8) + +#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */ + +#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */ +#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */ +#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */ +#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */ + +#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */ + +#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */ +#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */ +#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */ +#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */ +#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */ + +#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */ + +#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */ +#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */ +#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */ +#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */ +#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */ +#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */ +#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */ +#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */ + +#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */ + +#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */ + +#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */ + +#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */ + +/* + * The RSA DSV/II board has two fixed clock frequencies. One is the + * standard rate, and the other is 8 times faster. + */ +#define SERIAL_RSA_BAUD_BASE (921600) +#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8) + +/* + * Extra serial register definitions for the internal UARTs + * in TI OMAP processors. + */ +#define UART_OMAP_MDR1 0x08 /* Mode definition register */ +#define UART_OMAP_MDR2 0x09 /* Mode definition register 2 */ +#define UART_OMAP_SCR 0x10 /* Supplementary control register */ +#define UART_OMAP_SSR 0x11 /* Supplementary status register */ +#define UART_OMAP_EBLR 0x12 /* BOF length register */ +#define UART_OMAP_OSC_12M_SEL 0x13 /* OMAP1510 12MHz osc select */ +#define UART_OMAP_MVER 0x14 /* Module version register */ +#define UART_OMAP_SYSC 0x15 /* System configuration register */ +#define UART_OMAP_SYSS 0x16 /* System status register */ +#define UART_OMAP_WER 0x17 /* Wake-up enable register */ + +/* + * These are the definitions for the MDR1 register + */ +#define UART_OMAP_MDR1_16X_MODE 0x00 /* UART 16x mode */ +#define UART_OMAP_MDR1_SIR_MODE 0x01 /* SIR mode */ +#define UART_OMAP_MDR1_16X_ABAUD_MODE 0x02 /* UART 16x auto-baud */ +#define UART_OMAP_MDR1_13X_MODE 0x03 /* UART 13x mode */ +#define UART_OMAP_MDR1_MIR_MODE 0x04 /* MIR mode */ +#define UART_OMAP_MDR1_FIR_MODE 0x05 /* FIR mode */ +#define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */ +#define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */ + +/* + * These are definitions for the Exar XR17V35X and XR17(C|D)15X + */ +#define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */ +#define UART_EXAR_SLEEP 0x8b /* Sleep mode */ +#define UART_EXAR_DVID 0x8d /* Device identification */ + +#define UART_EXAR_FCTR 0x08 /* Feature Control Register */ +#define UART_FCTR_EXAR_IRDA 0x08 /* IrDa data encode select */ +#define UART_FCTR_EXAR_485 0x10 /* Auto 485 half duplex dir ctl */ +#define UART_FCTR_EXAR_TRGA 0x00 /* FIFO trigger table A */ +#define UART_FCTR_EXAR_TRGB 0x60 /* FIFO trigger table B */ +#define UART_FCTR_EXAR_TRGC 0x80 /* FIFO trigger table C */ +#define UART_FCTR_EXAR_TRGD 0xc0 /* FIFO trigger table D programmable */ + +#define UART_EXAR_TXTRG 0x0a /* Tx FIFO trigger level write-only */ +#define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */ + +#endif /* _LINUX_SERIAL_REG_H */ + diff --git a/include/serial.h b/include/serial.h index 8f574e4ef8..66ed12c9c2 100644 --- a/include/serial.h +++ b/include/serial.h @@ -164,4 +164,53 @@ struct serial_dev_priv { /* Access the serial operations for a device */ #define serial_get_ops(dev) ((struct dm_serial_ops *)(dev)->driver->ops) +void altera_jtag_serial_initialize(void); +void altera_serial_initialize(void); +void amirix_serial_initialize(void); +void arc_serial_initialize(void); +void arm_dcc_initialize(void); +void asc_serial_initialize(void); +void atmel_serial_initialize(void); +void au1x00_serial_initialize(void); +void bfin_jtag_initialize(void); +void bfin_serial_initialize(void); +void bmw_serial_initialize(void); +void clps7111_serial_initialize(void); +void cogent_serial_initialize(void); +void cpci750_serial_initialize(void); +void evb64260_serial_initialize(void); +void imx_serial_initialize(void); +void iop480_serial_initialize(void); +void jz_serial_initialize(void); +void ks8695_serial_initialize(void); +void leon2_serial_initialize(void); +void leon3_serial_initialize(void); +void lh7a40x_serial_initialize(void); +void lpc32xx_serial_initialize(void); +void marvell_serial_initialize(void); +void max3100_serial_initialize(void); +void mcf_serial_initialize(void); +void ml2_serial_initialize(void); +void mpc512x_serial_initialize(void); +void mpc5xx_serial_initialize(void); +void mpc8260_scc_serial_initialize(void); +void mpc8260_smc_serial_initialize(void); +void mpc85xx_serial_initialize(void); +void mpc8xx_serial_initialize(void); +void mxc_serial_initialize(void); +void mxs_auart_initialize(void); +void ns16550_serial_initialize(void); +void oc_serial_initialize(void); +void p3mx_serial_initialize(void); +void pl01x_serial_initialize(void); +void pxa_serial_initialize(void); +void s3c24xx_serial_initialize(void); +void s5p_serial_initialize(void); +void sa1100_serial_initialize(void); +void sandbox_serial_initialize(void); +void sconsole_serial_initialize(void); +void sh_serial_initialize(void); +void uartlite_serial_initialize(void); +void zynq_serial_initialize(void); + #endif diff --git a/include/twl4030.h b/include/twl4030.h index 093c61d6db..f33cd1eaed 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -390,11 +390,15 @@ /* Voltage Selection in PM Receiver Module */ #define TWL4030_PM_RECEIVER_VAUX2_VSEL_18 0x05 +#define TWL4030_PM_RECEIVER_VAUX2_VSEL_28 0x09 +#define TWL4030_PM_RECEIVER_VAUX3_VSEL_18 0x01 #define TWL4030_PM_RECEIVER_VAUX3_VSEL_28 0x03 #define TWL4030_PM_RECEIVER_VPLL2_VSEL_18 0x05 #define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_30 0x02 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_32 0x03 +#define TWL4030_PM_RECEIVER_VMMC2_VSEL_30 0x0B +#define TWL4030_PM_RECEIVER_VMMC2_VSEL_32 0x0C #define TWL4030_PM_RECEIVER_VSIM_VSEL_18 0x03 /* Device Selection in PM Receiver Module */ diff --git a/include/usb.h b/include/usb.h index c4a288d5e9..d3c741597c 100644 --- a/include/usb.h +++ b/include/usb.h @@ -11,6 +11,8 @@ #include <usb_defs.h> #include <linux/usb/ch9.h> +#include <asm/cache.h> +#include <part.h> /* * The EHCI spec says that we must align to at least 32 bytes. However, @@ -129,6 +131,8 @@ struct usb_device { unsigned int slot_id; }; +struct int_queue; + /* * You can initialize platform's USB host or device * ports by passing this enum as an argument to @@ -163,6 +167,13 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int transfer_len, int interval); +#ifdef CONFIG_USB_EHCI /* Only the ehci code has pollable int support */ +struct int_queue *create_int_queue(struct usb_device *dev, unsigned long pipe, + int queuesize, int elementsize, void *buffer); +int destroy_int_queue(struct usb_device *dev, struct int_queue *queue); +void *poll_int_queue(struct usb_device *dev, struct int_queue *queue); +#endif + /* Defines */ #define USB_UHCI_VEND_ID 0x8086 #define USB_UHCI_DEV_ID 0x7112 diff --git a/include/usb/omap1510_udc.h b/include/usb/omap1510_udc.h deleted file mode 100644 index adfbf54996..0000000000 --- a/include/usb/omap1510_udc.h +++ /dev/null @@ -1,174 +0,0 @@ -/* - * (C) Copyright 2003 - * Gerry Hamel, geh@ti.com, Texas Instruments - * - * Based on - * linux/drivers/usb/device/bi/omap.h - * Register definitions for TI OMAP1510 USB bus interface driver - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * 2003 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __USBDCORE_OMAP1510_H__ -#define __USBDCORE_OMAP1510_H__ - - -/* - * 13.2 MPU Register Map - */ - -/* Table 13-1. USB Function Module Registers (endpoint) */ -#define UDC_BASE 0xFFFB4000 -#define UDC_OFFSET(offset) (UDC_BASE + (offset)) -#define UDC_REV UDC_OFFSET(0x0) /* Revision */ -#define UDC_EP_NUM UDC_OFFSET(0x4) /* Endpoint selection */ -#define UDC_DATA UDC_OFFSET(0x08) /* Data */ -#define UDC_CTRL UDC_OFFSET(0x0C) /* Control */ -#define UDC_STAT_FLG UDC_OFFSET(0x10) /* Status flag */ -#define UDC_RXFSTAT UDC_OFFSET(0x14) /* Receive FIFO status */ -#define UDC_SYSCON1 UDC_OFFSET(0x18) /* System configuration 1 */ -#define UDC_SYSCON2 UDC_OFFSET(0x1C) /* System configuration 2 */ -#define UDC_DEVSTAT UDC_OFFSET(0x20) /* Device status */ -#define UDC_SOF UDC_OFFSET(0x24) /* Start of frame */ -#define UDC_IRQ_EN UDC_OFFSET(0x28) /* Interrupt enable */ -#define UDC_DMA_IRQ_EN UDC_OFFSET(0x2C) /* DMA interrupt enable */ -#define UDC_IRQ_SRC UDC_OFFSET(0x30) /* Interrupt source */ -#define UDC_EPN_STAT UDC_OFFSET(0x34) /* Endpoint interrupt status */ -#define UDC_DMAN_STAT UDC_OFFSET(0x3C) /* DMA endpoint interrupt status */ - -/* IRQ_EN register fields */ -#define UDC_Sof_IE (1 << 7) /* Start-of-frame interrupt enabled */ -#define UDC_EPn_RX_IE (1 << 5) /* Receive endpoint interrupt enabled */ -#define UDC_EPn_TX_IE (1 << 4) /* Transmit endpoint interrupt enabled */ -#define UDC_DS_Chg_IE (1 << 3) /* Device state changed interrupt enabled */ -#define UDC_EP0_IE (1 << 0) /* EP0 transaction interrupt enabled */ - -/* IRQ_SRC register fields */ -#define UDC_TXn_Done (1 << 10) /* Transmit DMA channel n done */ -#define UDC_RXn_Cnt (1 << 9) /* Receive DMA channel n transactions count */ -#define UDC_RXn_EOT (1 << 8) /* Receive DMA channel n end of transfer */ -#define UDC_SOF_Flg (1 << 7) /* Start-of-frame interrupt flag */ -#define UDC_EPn_RX (1 << 5) /* Endpoint n OUT transaction */ -#define UDC_EPn_TX (1 << 4) /* Endpoint n IN transaction */ -#define UDC_DS_Chg (1 << 3) /* Device state changed */ -#define UDC_Setup (1 << 2) /* Setup transaction */ -#define UDC_EP0_RX (1 << 1) /* EP0 OUT transaction */ -#define UDC_EP0_TX (1 << 0) /* EP0 IN transaction */ - -/* DEVSTAT register fields, 14.2.9 */ -#define UDC_R_WK_OK (1 << 6) /* Remote wakeup granted */ -#define UDC_USB_Reset (1 << 5) /* USB reset signalling is active */ -#define UDC_SUS (1 << 4) /* Suspended state */ -#define UDC_CFG (1 << 3) /* Configured state */ -#define UDC_ADD (1 << 2) /* Addressed state */ -#define UDC_DEF (1 << 1) /* Default state */ -#define UDC_ATT (1 << 0) /* Attached state */ - -/* SYSCON1 register fields */ -#define UDC_Cfg_Lock (1 << 8) /* Device configuration locked */ -#define UDC_Nak_En (1 << 4) /* NAK enable */ -#define UDC_Self_Pwr (1 << 2) /* Device is self-powered */ -#define UDC_Soff_Dis (1 << 1) /* Shutoff disabled */ -#define UDC_Pullup_En (1 << 0) /* External pullup enabled */ - -/* SYSCON2 register fields */ -#define UDC_Rmt_Wkp (1 << 6) /* Remote wakeup */ -#define UDC_Stall_Cmd (1 << 5) /* Stall endpoint */ -#define UDC_Dev_Cfg (1 << 3) /* Device configured */ -#define UDC_Clr_Cfg (1 << 2) /* Clear configured */ - -/* - * Select and enable endpoints - */ - -/* Table 13-1. USB Function Module Registers (endpoint configuration) */ -#define UDC_EPBASE UDC_OFFSET(0x80) /* Endpoints base address */ -#define UDC_EP0 UDC_EPBASE /* Control endpoint configuration */ -#define UDC_EP_RX_BASE UDC_OFFSET(0x84) /* Receive endpoints base address */ -#define UDC_EP_RX(endpoint) (UDC_EP_RX_BASE + ((endpoint) - 1) * 4) -#define UDC_EP_TX_BASE UDC_OFFSET(0xC4) /* Transmit endpoints base address */ -#define UDC_EP_TX(endpoint) (UDC_EP_TX_BASE + ((endpoint) - 1) * 4) - -/* EP_NUM register fields */ -#define UDC_Setup_Sel (1 << 6) /* Setup FIFO select */ -#define UDC_EP_Sel (1 << 5) /* TX/RX FIFO select */ -#define UDC_EP_Dir (1 << 4) /* Endpoint direction */ - -/* CTRL register fields */ -#define UDC_Clr_Halt (1 << 7) /* Clear halt endpoint */ -#define UDC_Set_Halt (1 << 6) /* Set halt endpoint */ -#define UDC_Set_FIFO_En (1 << 2) /* Set FIFO enable */ -#define UDC_Clr_EP (1 << 1) /* Clear endpoint */ -#define UDC_Reset_EP (1 << 0) /* Reset endpoint */ - -/* STAT_FLG register fields */ -#define UDC_Miss_In (1 << 14) -#define UDC_Data_Flush (1 << 13) -#define UDC_ISO_Err (1 << 12) -#define UDC_ISO_FIFO_Empty (1 << 9) -#define UDC_ISO_FIFO_Full (1 << 8) -#define UDC_EP_Halted (1 << 6) -#define UDC_STALL (1 << 5) -#define UDC_NAK (1 << 4) -#define UDC_ACK (1 << 3) -#define UDC_FIFO_En (1 << 2) -#define UDC_Non_ISO_FIFO_Empty (1 << 1) -#define UDC_Non_ISO_FIFO_Full (1 << 0) - -/* EPn_RX register fields */ -#define UDC_EPn_RX_Valid (1 << 15) /* valid */ -#define UDC_EPn_RX_Db (1 << 14) /* double-buffer */ -#define UDC_EPn_RX_Iso (1 << 11) /* isochronous */ - -/* EPn_TX register fields */ -#define UDC_EPn_TX_Valid (1 << 15) /* valid */ -#define UDC_EPn_TX_Db (1 << 14) /* double-buffer */ -#define UDC_EPn_TX_Iso (1 << 11) /* isochronous */ - -#define EP0_PACKETSIZE 0x40 - -/* physical to logical endpoint mapping - * Physical endpoints are an index into device->bus->endpoint_array. - * Logical endpoints are endpoints 0 to 15 IN and OUT as defined in - * the USB specification. - * - * physical ep logical ep direction endpoint_address - * 0 0 IN and OUT 0x00 - * 1 to 15 1 to 15 OUT 0x01 to 0x0f - * 16 to 30 1 to 15 IN 0x81 to 0x8f - */ -#define PHYS_EP_TO_EP_ADDR(ep) (((ep) < 16) ? (ep) : (((ep) - 15) | 0x80)) -#define EP_ADDR_TO_PHYS_EP(a) (((a) & 0x80) ? (((a) & ~0x80) + 15) : (a)) - -/* MOD_CONF_CTRL_0 bits (FIXME: move to board hardware.h ?) */ -#define CONF_MOD_USB_W2FC_VBUS_MODE_R (1 << 17) - -/* Other registers (may be) related to USB */ - -#define CLOCK_CTRL (0xFFFE0830) -#define APLL_CTRL (0xFFFE084C) -#define DPLL_CTRL (0xFFFE083C) -#define SOFT_REQ (0xFFFE0834) -#define STATUS_REQ (0xFFFE0840) - -/* FUNC_MUX_CTRL_0 bits related to USB */ -#define UDC_VBUS_CTRL (1 << 19) -#define UDC_VBUS_MODE (1 << 18) - -/* OMAP Endpoint parameters */ -#define UDC_OUT_PACKET_SIZE 64 -#define UDC_IN_PACKET_SIZE 64 -#define UDC_INT_PACKET_SIZE 16 -#define UDC_BULK_PACKET_SIZE 16 - -#define UDC_INT_ENDPOINT 5 -#define UDC_OUT_ENDPOINT 2 -#define UDC_IN_ENDPOINT 1 - -#endif diff --git a/include/usb/s3c_udc.h b/include/usb/s3c_udc.h index 70e48f88ee..7f49a4e2d5 100644 --- a/include/usb/s3c_udc.h +++ b/include/usb/s3c_udc.h @@ -108,5 +108,6 @@ struct s3c_plat_otg_data { unsigned int regs_otg; unsigned int usb_phy_ctrl; unsigned int usb_flags; + unsigned int usb_gusbcfg; }; #endif diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include index 4c333599c1..d20f20ae32 100644 --- a/scripts/Kbuild.include +++ b/scripts/Kbuild.include @@ -177,13 +177,13 @@ ld-ifversion = $(shell [ $(call ld-version) $(1) $(2) ] && echo $(3)) # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj= # Usage: # $(Q)$(MAKE) $(build)=dir -build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj +build := -f $(srctree)/scripts/Makefile.build obj ### # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj= # Usage: # $(Q)$(MAKE) $(modbuiltin)=dir -modbuiltin := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.modbuiltin obj +modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj # Prefix -I with $(srctree) if it is not an absolute path. # skip if -I has no parameter @@ -221,11 +221,13 @@ else arg-check = $(if $(strip $(cmd_$@)),,1) endif -# >'< substitution is for echo to work, -# >$< substitution to preserve $ when reloading .cmd file -# note: when using inline perl scripts [perl -e '...$$t=1;...'] -# in $(cmd_xxx) double $$ your perl vars -make-cmd = $(subst \\,\\\\,$(subst \#,\\\#,$(subst $$,$$$$,$(call escsq,$(cmd_$(1)))))) +# Replace >$< with >$$< to preserve $ when reloading the .cmd file +# (needed for make) +# Replace >#< with >\#< to avoid starting a comment in the .cmd file +# (needed for make) +# Replace >'< with >'\''< to be able to enclose the whole string in '...' +# (needed for the shell) +make-cmd = $(call escsq,$(subst \#,\\\#,$(subst $$,$$$$,$(cmd_$(1))))) # Find any prerequisites that is newer than target or that does not exist. # PHONY targets skipped in both cases. @@ -236,7 +238,7 @@ any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^) if_changed = $(if $(strip $(any-prereq) $(arg-check)), \ @set -e; \ $(echo-cmd) $(cmd_$(1)); \ - echo 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd) + printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd) # Execute the command and also postprocess generated .d dependencies file. if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \ diff --git a/scripts/Makefile.autoconf b/scripts/Makefile.autoconf index ced2b9a6b0..8e9d71f89e 100644 --- a/scripts/Makefile.autoconf +++ b/scripts/Makefile.autoconf @@ -89,9 +89,12 @@ PHONY += create_symlink create_symlink: ifneq ($(KBUILD_SRC),) $(Q)mkdir -p include/asm + $(Q)ln -fsn $(KBUILD_SRC)/arch/$(ARCH)/include/asm/arch-$(if $(SOC),$(SOC),$(CPU)) \ + include/asm/arch +else + $(Q)ln -fsn arch-$(if $(SOC),$(SOC),$(CPU)) \ + arch/$(ARCH)/include/asm/arch endif - $(Q)ln -fsn $(srctree)/arch/$(ARCH)/include/asm/arch-$(if $(SOC),$(SOC),$(CPU)) \ - $(if $(KBUILD_SRC),,arch/$(ARCH)/)include/asm/arch PHONY += FORCE FORCE: diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 6742ddd0b8..14cf0925d2 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -97,11 +97,11 @@ endif # =========================================================================== -ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),) +ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),) lib-target := $(obj)/lib.a endif -ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),) +ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),) builtin-target := $(obj)/built-in.o endif @@ -400,16 +400,14 @@ cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalys quiet_cmd_link_multi-m = LD [M] $@ cmd_link_multi-m = $(cmd_link_multi-y) -# We would rather have a list of rules like -# foo.o: $(foo-objs) -# but that's not so easy, so we rather make all composite objects depend -# on the set of all their parts -$(multi-used-y) : %.o: $(multi-objs-y) FORCE +$(multi-used-y): FORCE $(call if_changed,link_multi-y) +$(call multi_depend, $(multi-used-y), .o, -objs -y) -$(multi-used-m) : %.o: $(multi-objs-m) FORCE +$(multi-used-m): FORCE $(call if_changed,link_multi-m) @{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod) +$(call multi_depend, $(multi-used-m), .o, -objs -y) targets += $(multi-used-y) $(multi-used-m) diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean index 88f14e2d8f..21e1f21531 100644 --- a/scripts/Makefile.clean +++ b/scripts/Makefile.clean @@ -10,7 +10,7 @@ __clean: # Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir # Usage: # $(Q)$(MAKE) $(clean)=dir -clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj +clean := -f $(srctree)/scripts/Makefile.clean obj # The filename Kbuild has precedence over Makefile kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) @@ -23,15 +23,13 @@ __subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y))) subdir-y += $(__subdir-y) __subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m))) subdir-m += $(__subdir-m) -__subdir-n := $(patsubst %/,%,$(filter %/, $(obj-n))) -subdir-n += $(__subdir-n) __subdir- := $(patsubst %/,%,$(filter %/, $(obj-))) subdir- += $(__subdir-) # Subdirectories we need to descend into subdir-ym := $(sort $(subdir-y) $(subdir-m)) -subdir-ymn := $(sort $(subdir-ym) $(subdir-n) $(subdir-)) +subdir-ymn := $(sort $(subdir-ym) $(subdir-)) # Add subdir path diff --git a/scripts/Makefile.extrawarn b/scripts/Makefile.extrawarn index 65643506c7..0ec0d24b1c 100644 --- a/scripts/Makefile.extrawarn +++ b/scripts/Makefile.extrawarn @@ -26,16 +26,6 @@ warning-1 += $(call cc-option, -Wmissing-include-dirs) warning-1 += $(call cc-option, -Wunused-but-set-variable) warning-1 += $(call cc-disable-warning, missing-field-initializers) -# Clang -warning-1 += $(call cc-disable-warning, initializer-overrides) -warning-1 += $(call cc-disable-warning, unused-value) -warning-1 += $(call cc-disable-warning, format) -warning-1 += $(call cc-disable-warning, unknown-warning-option) -warning-1 += $(call cc-disable-warning, sign-compare) -warning-1 += $(call cc-disable-warning, format-zero-length) -warning-1 += $(call cc-disable-warning, uninitialized) -warning-1 += $(call cc-option, -fcatch-undefined-behavior) - warning-2 := -Waggregate-return warning-2 += -Wcast-align warning-2 += -Wdisabled-optimization diff --git a/scripts/Makefile.host b/scripts/Makefile.host index 66893643fd..133edfae5b 100644 --- a/scripts/Makefile.host +++ b/scripts/Makefile.host @@ -20,21 +20,12 @@ # Will compile qconf as a C++ program, and menu as a C program. # They are linked as C++ code to the executable qconf -# hostprogs-y := conf -# conf-objs := conf.o libkconfig.so -# libkconfig-objs := expr.o type.o -# Will create a shared library named libkconfig.so that consists of -# expr.o and type.o (they are both compiled as C code and the object files -# are made as position independent code). -# conf.c is compiled as a C program, and conf.o is linked together with -# libkconfig.so as the executable conf. -# Note: Shared libraries consisting of C++ files are not supported - __hostprogs := $(sort $(hostprogs-y) $(hostprogs-m)) # C code # Executables compiled from a single .c file -host-csingle := $(foreach m,$(__hostprogs),$(if $($(m)-objs),,$(m))) +host-csingle := $(foreach m,$(__hostprogs), \ + $(if $($(m)-objs)$($(m)-cxxobjs),,$(m))) # C executables linked based on several .o files host-cmulti := $(foreach m,$(__hostprogs),\ @@ -44,33 +35,17 @@ host-cmulti := $(foreach m,$(__hostprogs),\ host-cobjs := $(sort $(foreach m,$(__hostprogs),$($(m)-objs))) # C++ code -# C++ executables compiled from at least on .cc file +# C++ executables compiled from at least one .cc file # and zero or more .c files host-cxxmulti := $(foreach m,$(__hostprogs),$(if $($(m)-cxxobjs),$(m))) # C++ Object (.o) files compiled from .cc files host-cxxobjs := $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs))) -# Shared libaries (only .c supported) -# Shared libraries (.so) - all .so files referenced in "xxx-objs" -host-cshlib := $(sort $(filter %.so, $(host-cobjs))) -# Remove .so files from "xxx-objs" -host-cobjs := $(filter-out %.so,$(host-cobjs)) - -#Object (.o) files used by the shared libaries -host-cshobjs := $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs)))) - # output directory for programs/.o files -# hostprogs-y := tools/build may have been specified. Retrieve directory -host-objdirs := $(foreach f,$(__hostprogs), $(if $(dir $(f)),$(dir $(f)))) -# directory of .o files from prog-objs notation -host-objdirs += $(foreach f,$(host-cmulti), \ - $(foreach m,$($(f)-objs), \ - $(if $(dir $(m)),$(dir $(m))))) -# directory of .o files from prog-cxxobjs notation -host-objdirs += $(foreach f,$(host-cxxmulti), \ - $(foreach m,$($(f)-cxxobjs), \ - $(if $(dir $(m)),$(dir $(m))))) +# hostprogs-y := tools/build may have been specified. +# Retrieve also directory of .o files from prog-objs or prog-cxxobjs notation +host-objdirs := $(dir $(__hostprogs) $(host-cobjs) $(host-cxxobjs)) host-objdirs := $(strip $(sort $(filter-out ./,$(host-objdirs)))) @@ -81,8 +56,6 @@ host-cmulti := $(addprefix $(obj)/,$(host-cmulti)) host-cobjs := $(addprefix $(obj)/,$(host-cobjs)) host-cxxmulti := $(addprefix $(obj)/,$(host-cxxmulti)) host-cxxobjs := $(addprefix $(obj)/,$(host-cxxobjs)) -host-cshlib := $(addprefix $(obj)/,$(host-cshlib)) -host-cshobjs := $(addprefix $(obj)/,$(host-cshobjs)) host-objdirs := $(addprefix $(obj)/,$(host-objdirs)) obj-dirs += $(host-objdirs) @@ -123,8 +96,9 @@ quiet_cmd_host-cmulti = HOSTLD $@ cmd_host-cmulti = $(HOSTCC) $(HOSTLDFLAGS) -o $@ \ $(addprefix $(obj)/,$($(@F)-objs)) \ $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F)) -$(host-cmulti): $(obj)/%: $(host-cobjs) $(host-cshlib) FORCE +$(host-cmulti): FORCE $(call if_changed,host-cmulti) +$(call multi_depend, $(host-cmulti), , -objs) # Create .o file from a single .c file # host-cobjs -> .o @@ -140,8 +114,9 @@ quiet_cmd_host-cxxmulti = HOSTLD $@ $(foreach o,objs cxxobjs,\ $(addprefix $(obj)/,$($(@F)-$(o)))) \ $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F)) -$(host-cxxmulti): $(obj)/%: $(host-cobjs) $(host-cxxobjs) $(host-cshlib) FORCE +$(host-cxxmulti): FORCE $(call if_changed,host-cxxmulti) +$(call multi_depend, $(host-cxxmulti), , -objs -cxxobjs) # Create .o file from a single .cc (C++) file quiet_cmd_host-cxxobjs = HOSTCXX $@ @@ -149,21 +124,5 @@ quiet_cmd_host-cxxobjs = HOSTCXX $@ $(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE $(call if_changed_dep,host-cxxobjs) -# Compile .c file, create position independent .o file -# host-cshobjs -> .o -quiet_cmd_host-cshobjs = HOSTCC -fPIC $@ - cmd_host-cshobjs = $(HOSTCC) $(hostc_flags) -fPIC -c -o $@ $< -$(host-cshobjs): $(obj)/%.o: $(src)/%.c FORCE - $(call if_changed_dep,host-cshobjs) - -# Link a shared library, based on position independent .o files -# *.o -> .so shared library (host-cshlib) -quiet_cmd_host-cshlib = HOSTLLD -shared $@ - cmd_host-cshlib = $(HOSTCC) $(HOSTLDFLAGS) -shared -o $@ \ - $(addprefix $(obj)/,$($(@F:.so=-objs))) \ - $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F)) -$(host-cshlib): $(obj)/%: $(host-cshobjs) FORCE - $(call if_changed,host-cshlib) - targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\ - $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs) + $(host-cxxmulti) $(host-cxxobjs) diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 072abaafb1..9d1383a38f 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -160,6 +160,15 @@ dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \ modname-multi = $(sort $(foreach m,$(multi-used),\ $(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=)))) +# Useful for describing the dependency of composite objects +# Usage: +# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add) +define multi_depend +$(foreach m, $(notdir $1), \ + $(eval $(obj)/$m: \ + $(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s))))))) +endef + ifdef REGENERATE_PARSERS # GPERF diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 9c4d2412fb..349f77038e 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -104,6 +104,23 @@ endif %_defconfig: $(obj)/conf $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig) +configfiles=$(wildcard $(srctree)/kernel/configs/$(1).config $(srctree)/arch/$(SRCARCH)/configs/$(1).config) + +define mergeconfig +$(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target)) +$(if $(call configfiles,$(1)),, $(error No configuration exists for this target on this architecture)) +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(call configfiles,$(1)) +$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig +endef + +PHONY += kvmconfig +kvmconfig: + $(call mergeconfig,kvm_guest) + +PHONY += tinyconfig +tinyconfig: allnoconfig + $(call mergeconfig,tiny) + # Help text used by make help help: @echo ' config - Update current config utilising a line-oriented program' @@ -124,6 +141,8 @@ help: @echo ' randconfig - New config with random answer to all options' @echo ' listnewconfig - List new options' @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' +# @echo ' kvmconfig - Enable additional options for guest kernel support' +# @echo ' tinyconfig - Configure the tiniest possible kernel' # lxdialog stuff check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh @@ -157,39 +176,10 @@ qconf-cxxobjs := qconf.o qconf-objs := zconf.tab.o gconf-objs := gconf.o zconf.tab.o -hostprogs-y := conf - -ifeq ($(MAKECMDGOALS),nconfig) - hostprogs-y += nconf -endif - -ifeq ($(MAKECMDGOALS),menuconfig) - hostprogs-y += mconf -endif - -ifeq ($(MAKECMDGOALS),update-po-config) - hostprogs-y += kxgettext -endif - -ifeq ($(MAKECMDGOALS),xconfig) - qconf-target := 1 -endif -ifeq ($(MAKECMDGOALS),gconfig) - gconf-target := 1 -endif - - -ifeq ($(qconf-target),1) - hostprogs-y += qconf -endif - -ifeq ($(gconf-target),1) - hostprogs-y += gconf -endif +hostprogs-y := conf nconf mconf kxgettext qconf gconf clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h -clean-files += mconf qconf gconf nconf clean-files += config.pot linux.pot # Check that we have the required ncurses stuff installed for lxdialog (menuconfig) @@ -220,11 +210,12 @@ HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \ HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) HOSTLOADLIBES_nconf = $(shell \ - pkg-config --libs menu panel ncurses 2>/dev/null \ + pkg-config --libs menuw panelw ncursesw 2>/dev/null \ + || pkg-config --libs menu panel ncurses 2>/dev/null \ || echo "-lmenu -lpanel -lncurses" ) $(obj)/qconf.o: $(obj)/.tmp_qtcheck -ifeq ($(qconf-target),1) +ifeq ($(MAKECMDGOALS),xconfig) $(obj)/.tmp_qtcheck: $(src)/Makefile -include $(obj)/.tmp_qtcheck @@ -281,7 +272,7 @@ endif $(obj)/gconf.o: $(obj)/.tmp_gtkcheck -ifeq ($(gconf-target),1) +ifeq ($(MAKECMDGOALS),gconfig) -include $(obj)/.tmp_gtkcheck # GTK needs some extra effort, too... diff --git a/scripts/kconfig/lxdialog/dialog.h b/scripts/kconfig/lxdialog/dialog.h index b4343d3849..fcffd5b41f 100644 --- a/scripts/kconfig/lxdialog/dialog.h +++ b/scripts/kconfig/lxdialog/dialog.h @@ -170,7 +170,7 @@ char item_tag(void); /* item list manipulation for lxdialog use */ #define MAXITEMSTR 200 struct dialog_item { - char str[MAXITEMSTR]; /* promtp displayed */ + char str[MAXITEMSTR]; /* prompt displayed */ char tag; void *data; /* pointer to menu item - used by menubox+checklist */ int selected; /* Set to 1 by dialog_*() function if selected. */ diff --git a/scripts/kernel-doc b/scripts/kernel-doc index c881b8cb3e..08a6c76845 100755 --- a/scripts/kernel-doc +++ b/scripts/kernel-doc @@ -2073,6 +2073,7 @@ sub check_return_section { sub dump_function($$) { my $prototype = shift; my $file = shift; + my $noret = 0; $prototype =~ s/^static +//; $prototype =~ s/^extern +//; @@ -2084,9 +2085,10 @@ sub dump_function($$) { $prototype =~ s/^noinline +//; $prototype =~ s/__init +//; $prototype =~ s/__init_or_module +//; + $prototype =~ s/__meminit +//; $prototype =~ s/__must_check +//; $prototype =~ s/__weak +//; - $prototype =~ s/^#\s*define\s+//; #ak added + my $define = $prototype =~ s/^#\s*define\s+//; #ak added $prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//; # Yes, this truly is vile. We are looking for: @@ -2105,7 +2107,15 @@ sub dump_function($$) { # - atomic_set (macro) # - pci_match_device, __copy_to_user (long return type) - if ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || + if ($define && $prototype =~ m/^()([a-zA-Z0-9_~:]+)\s+/) { + # This is an object-like macro, it has no return type and no parameter + # list. + # Function-like macros are not allowed to have spaces between + # declaration_name and opening parenthesis (notice the \s+). + $return_type = $1; + $declaration_name = $2; + $noret = 1; + } elsif ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || $prototype =~ m/^(\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || $prototype =~ m/^(\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || $prototype =~ m/^(\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ || @@ -2140,7 +2150,7 @@ sub dump_function($$) { # of warnings goes sufficiently down, the check is only performed in # verbose mode. # TODO: always perform the check. - if ($verbose) { + if ($verbose && !$noret) { check_return_section($file, $declaration_name, $return_type); } diff --git a/scripts/multiconfig.sh b/scripts/multiconfig.sh index 3e3040b2e2..70f3a5df6f 100644 --- a/scripts/multiconfig.sh +++ b/scripts/multiconfig.sh @@ -162,6 +162,16 @@ do_defconfig () { fi } +do_board_felconfig () { + do_board_defconfig ${1%%_felconfig}_defconfig + if ! grep -q CONFIG_ARCH_SUNXI=y .config || ! grep -q CONFIG_SPL=y .config ; then + echo "$progname: Cannot felconfig a non-sunxi or non-SPL platform" >&2 + exit 1 + fi + sed -i -e 's/\# CONFIG_SPL_FEL is not set/CONFIG_SPL_FEL=y/g' \ + .config spl/.config +} + do_savedefconfig () { if [ -r "$KCONFIG_CONFIG" ]; then subimages=$(get_enabled_subimages) @@ -323,6 +333,8 @@ target=$1 case $target in *_defconfig) do_board_defconfig $target;; +*_felconfig) + do_board_felconfig $target;; *_config) # backward compatibility do_board_defconfig ${target%_config}_defconfig;; diff --git a/test/command_ut.c b/test/command_ut.c index e136075541..926573a395 100644 --- a/test/command_ut.c +++ b/test/command_ut.c @@ -188,6 +188,11 @@ static int do_ut_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #endif #endif + assert(run_command("", 0) == 0); + assert(run_command(" ", 0) == 0); + + assert(run_command("'", 0) == 1); + printf("%s: Everything went swimmingly\n", __func__); return 0; } diff --git a/tools/Makefile b/tools/Makefile index 3b95964fd1..c422b76054 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -157,7 +157,7 @@ HOSTCFLAGS_sha256.o := -pedantic #HOSTCFLAGS_mpc86x_clk.o := -pedantic quiet_cmd_wrap = WRAP $@ -cmd_wrap = echo "\#include <$(srctree)/$(patsubst $(obj)/%,%,$@)>" >$@ +cmd_wrap = echo "\#include <../$(patsubst $(obj)/%,%,$@)>" >$@ $(obj)/lib/%.c $(obj)/common/%.c: $(call cmd,wrap) diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c index 30d5b037f0..1173eea782 100644 --- a/tools/env/fw_env.c +++ b/tools/env/fw_env.c @@ -125,7 +125,7 @@ static int get_config (char *); #endif static inline ulong getenvsize (void) { - ulong rc = CUR_ENVSIZE - sizeof(long); + ulong rc = CUR_ENVSIZE - sizeof(uint32_t); if (HaveRedundEnv) rc -= sizeof (char); diff --git a/tools/imximage.c b/tools/imximage.c index faba23860f..526b7d490d 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -587,7 +587,7 @@ static void imximage_set_header(void *ptr, struct stat *sbuf, int ifd, * * The remaining fraction of a block bytes would not be loaded! */ - *header_size_ptr = ROUND(sbuf->st_size, 4096); + *header_size_ptr = ROUND((sbuf->st_size + imximage_ivt_offset), 4096); if (csf_ptr && imximage_csf_size) { *csf_ptr = params->ep - imximage_init_loadsize + diff --git a/tools/kwbimage.c b/tools/kwbimage.c index 1120e9b372..c50f2e2b24 100644 --- a/tools/kwbimage.c +++ b/tools/kwbimage.c @@ -12,6 +12,7 @@ */ #include "imagetool.h" +#include <limits.h> #include <image.h> #include <stdint.h> #include "kwbimage.h" @@ -324,7 +325,7 @@ static void *image_create_v0(size_t *imagesz, struct image_tool_params *params, main_hdr = image; /* Fill in the main header */ - main_hdr->blocksize = payloadsz + sizeof(uint32_t); + main_hdr->blocksize = payloadsz + sizeof(uint32_t) - headersz; main_hdr->srcaddr = headersz; main_hdr->ext = has_ext; main_hdr->destaddr = params->addr; @@ -396,13 +397,20 @@ static size_t image_headersz_v1(struct image_tool_params *params, ret = stat(binarye->binary.file, &s); if (ret < 0) { - char *cwd = get_current_dir_name(); + char cwd[PATH_MAX]; + char *dir = cwd; + + memset(cwd, 0, sizeof(cwd)); + if (!getcwd(cwd, sizeof(cwd))) { + dir = "current working directory"; + perror("getcwd() failed"); + } + fprintf(stderr, "Didn't find the file '%s' in '%s' which is mandatory to generate the image\n" "This file generally contains the DDR3 training code, and should be extracted from an existing bootable\n" "image for your board. See 'kwbimage -x' to extract it from an existing image.\n", - binarye->binary.file, cwd); - free(cwd); + binarye->binary.file, dir); return 0; } @@ -752,14 +760,25 @@ static void kwbimage_set_header(void *ptr, struct stat *sbuf, int ifd, } version = image_get_version(); - /* Fallback to version 0 is no version is provided in the cfg file */ - if (version == -1) - version = 0; - - if (version == 0) + switch (version) { + /* + * Fallback to version 0 if no version is provided in the + * cfg file + */ + case -1: + case 0: image = image_create_v0(&headersz, params, sbuf->st_size); - else if (version == 1) + break; + + case 1: image = image_create_v1(&headersz, params, sbuf->st_size); + break; + + default: + fprintf(stderr, "Unsupported version %d\n", version); + free(image_cfg); + exit(EXIT_FAILURE); + } if (!image) { fprintf(stderr, "Could not create image\n"); @@ -792,8 +811,8 @@ static void kwbimage_print_header(const void *ptr) printf("Image Type: MVEBU Boot from %s Image\n", image_boot_mode_name(mhdr->blockid)); - printf("Data Size: "); printf("Image version:%d\n", image_version((void *)ptr)); + printf("Data Size: "); genimg_print_size(mhdr->blocksize - sizeof(uint32_t)); printf("Load Address: %08x\n", mhdr->destaddr); printf("Entry Point: %08x\n", mhdr->execaddr); @@ -816,7 +835,8 @@ static int kwbimage_verify_header(unsigned char *ptr, int image_size, main_hdr = (void *)ptr; checksum = image_checksum8(ptr, - sizeof(struct main_hdr_v0)); + sizeof(struct main_hdr_v0) + - sizeof(uint8_t)); if (checksum != main_hdr->checksum) return -FDT_ERR_BADSTRUCTURE; @@ -824,7 +844,8 @@ static int kwbimage_verify_header(unsigned char *ptr, int image_size, if (image_version((void *)ptr) == 0) { ext_hdr = (void *)ptr + sizeof(struct main_hdr_v0); checksum = image_checksum8(ext_hdr, - sizeof(struct ext_hdr_v0)); + sizeof(struct ext_hdr_v0) + - sizeof(uint8_t)); if (checksum != ext_hdr->checksum) return -FDT_ERR_BADSTRUCTURE; } diff --git a/tools/mkenvimage.c b/tools/mkenvimage.c index bbd3041e36..6971b91314 100644 --- a/tools/mkenvimage.c +++ b/tools/mkenvimage.c @@ -37,6 +37,8 @@ static void usage(const char *exec_name) "\t\tkey1=value1\n" "\t\tkey2=value2\n" "\t\t...\n" + "\tEmpty lines are skipped, and lines with a # in the first\n" + "\tcolumn are treated as comments (also skipped).\n" "\t-r : the environment has multiple copies in flash\n" "\t-b : the target is big endian (default is little endian)\n" "\t-p <byte> : fill the image with <byte> bytes instead of 0xff bytes\n" @@ -221,10 +223,9 @@ int main(int argc, char **argv) /* Replace newlines separating variables with \0 */ for (fp = 0, ep = 0 ; fp < filesize ; fp++) { if (filebuf[fp] == '\n') { - if (ep == 0) { + if (fp == 0 || filebuf[fp-1] == '\n') { /* - * Newlines at the beginning of the file ? - * Ignore them. + * Skip empty lines. */ continue; } else if (filebuf[fp-1] == '\\') { @@ -240,6 +241,10 @@ int main(int argc, char **argv) /* End of a variable */ envptr[ep++] = '\0'; } + } else if ((fp == 0 || filebuf[fp-1] == '\n') && filebuf[fp] == '#') { + /* Comment, skip the line. */ + while (++fp < filesize && filebuf[fp] != '\n') + continue; } else { envptr[ep++] = filebuf[fp]; } |
