diff options
| -rw-r--r-- | drivers/net/phy/micrel.c | 58 |
1 files changed, 58 insertions, 0 deletions
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 507b9a368b..1815b2900d 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -22,6 +22,63 @@ static struct phy_driver KSZ804_driver = { .shutdown = &genphy_shutdown, }; +/** + * KSZ8895 + */ + +static unsigned short smireg_to_phy(unsigned short reg) +{ + return ((reg & 0xc0) >> 3) + 0x06 + ((reg & 0x20) >> 5); +} + +static unsigned short smireg_to_reg(unsigned short reg) +{ + return reg & 0x1F; +} + +static void ksz8895_write_smireg(struct phy_device *phydev, int smireg, int val) +{ + phydev->bus->write(phydev->bus, smireg_to_phy(smireg), MDIO_DEVAD_NONE, + smireg_to_reg(smireg), val); +} + +#if 0 +static int ksz8895_read_smireg(struct phy_device *phydev, int smireg) +{ + return phydev->bus->read(phydev->bus, smireg_to_phy(smireg), + MDIO_DEVAD_NONE, smireg_to_reg(smireg)); +} +#endif + +int ksz8895_config(struct phy_device *phydev) +{ + /* we are connected directly to the switch without + * dedicated PHY. SCONF1 == 001 */ + phydev->link = 1; + phydev->duplex = DUPLEX_FULL; + phydev->speed = SPEED_100; + + /* Force the switch to start */ + ksz8895_write_smireg(phydev, 1, 1); + + return 0; +} + +static int ksz8895_startup(struct phy_device *phydev) +{ + return 0; +} + +static struct phy_driver ksz8895_driver = { + .name = "Micrel KSZ8895/KSZ8864", + .uid = 0x221450, + .mask = 0xffffe1, + .features = PHY_BASIC_FEATURES, + .config = &ksz8895_config, + .startup = &ksz8895_startup, + .shutdown = &genphy_shutdown, +}; + #ifndef CONFIG_PHY_MICREL_KSZ9021 /* * I can't believe Micrel used the exact same part number @@ -221,5 +278,6 @@ int phy_micrel_init(void) phy_register(&KS8721_driver); #endif phy_register(&ksz9031_driver); + phy_register(&ksz8895_driver); return 0; } |
