diff options
49 files changed, 1195 insertions, 634 deletions
@@ -5904,9 +5904,10 @@ option performs the converse operation of the mkimage's second form (the "-d" option). Given an image built by mkimage, the dumpimage extracts a "data file" from the image: - tools/dumpimage -i image -p position data_file - -i ==> extract from the 'image' a specific 'data_file', \ - indexed by 'position' + tools/dumpimage -i image -T type -p position data_file + -i ==> extract from the 'image' a specific 'data_file' + -T ==> set image type to 'type' + -p ==> 'position' (starting at 0) of the 'data_file' inside the 'image' Installing a Linux Image: diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5eb1d03cfa..986b4c5d81 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -51,6 +51,13 @@ config SYS_CPU default "sa1100" if CPU_SA1100 default "armv8" if ARM64 +config SEMIHOSTING + bool "support boot from semihosting" + help + In emulated environments, semihosting is a way for + the hosted environment to call out to the emulator to + retrieve files from the host machine. + choice prompt "Target select" @@ -720,10 +727,19 @@ config TEGRA select CPU_ARM720T if SPL_BUILD select CPU_V7 if !SPL_BUILD -config TARGET_VEXPRESS_AEMV8A +config TARGET_VEXPRESS64_AEMV8A bool "Support vexpress_aemv8a" select ARM64 +config TARGET_VEXPRESS64_BASE_FVP + bool "Support Versatile Express ARMv8a FVP BASE model" + select ARM64 + select SEMIHOSTING + +config TARGET_VEXPRESS64_JUNO + bool "Support Versatile Express Juno Development Platform" + select ARM64 + config TARGET_LS2085A_EMU bool "Support ls2085a_emu" select ARM64 diff --git a/arch/arm/cpu/armv7/cpu.c b/arch/arm/cpu/armv7/cpu.c index 01cdb7ee76..c56417dd2f 100644 --- a/arch/arm/cpu/armv7/cpu.c +++ b/arch/arm/cpu/armv7/cpu.c @@ -53,7 +53,7 @@ int cleanup_before_linux(void) * After D-cache is flushed and before it is disabled there may * be some new valid entries brought into the cache. We are sure * that these lines are not dirty and will not affect our execution. - * (because unwinding the call-stack and setting a bit in CP15 SCTRL + * (because unwinding the call-stack and setting a bit in CP15 SCTLR * is all we did during this. We have not pushed anything on to the * stack. Neither have we affected any static data) * So just invalidate the entire d-cache again to avoid coherency diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index fdc05b942f..70048c10ae 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -52,10 +52,10 @@ reset: * Continue to use ROM code vector only in OMAP4 spl) */ #if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD)) - /* Set V=0 in CP15 SCTRL register - for VBAR to point to vector */ - mrc p15, 0, r0, c1, c0, 0 @ Read CP15 SCTRL Register + /* Set V=0 in CP15 SCTLR register - for VBAR to point to vector */ + mrc p15, 0, r0, c1, c0, 0 @ Read CP15 SCTLR Register bic r0, #CR_V @ V = 0 - mcr p15, 0, r0, c1, c0, 0 @ Write CP15 SCTRL Register + mcr p15, 0, r0, c1, c0, 0 @ Write CP15 SCTLR Register /* Set vector address in CP15 VBAR register */ ldr r0, =_start diff --git a/board/armltd/vexpress64/Kconfig b/board/armltd/vexpress64/Kconfig index 7ebea6317f..7d5e7bee8b 100644 --- a/board/armltd/vexpress64/Kconfig +++ b/board/armltd/vexpress64/Kconfig @@ -1,4 +1,30 @@ -if TARGET_VEXPRESS_AEMV8A +if TARGET_VEXPRESS64_AEMV8A + +config SYS_BOARD + default "vexpress64" + +config SYS_VENDOR + default "armltd" + +config SYS_CONFIG_NAME + default "vexpress_aemv8a" + +endif + +if TARGET_VEXPRESS64_BASE_FVP + +config SYS_BOARD + default "vexpress64" + +config SYS_VENDOR + default "armltd" + +config SYS_CONFIG_NAME + default "vexpress_aemv8a" + +endif + +if TARGET_VEXPRESS64_JUNO config SYS_BOARD default "vexpress64" diff --git a/board/armltd/vexpress64/MAINTAINERS b/board/armltd/vexpress64/MAINTAINERS index 66c8dffa16..0ba044d7ff 100644 --- a/board/armltd/vexpress64/MAINTAINERS +++ b/board/armltd/vexpress64/MAINTAINERS @@ -9,3 +9,8 @@ VEXPRESS_AEMV8A_SEMI BOARD M: Linus Walleij <linus.walleij@linaro.org> S: Maintained F: configs/vexpress_aemv8a_semi_defconfig + +JUNO DEVELOPMENT PLATFORM BOARD +M: Linus Walleij <linus.walleij@linaro.org> +S: Maintained +F: configs/vexpress_aemv8a_juno_defconfig diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 67233600b1..48199bfff3 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -185,6 +185,9 @@ static char bootm_help_text[] = "\tcmdline - OS specific command line processing/setup\n" "\tbdt - OS specific bd_t processing\n" "\tprep - OS specific prep before relocation or go\n" +#if defined(CONFIG_TRACE) + "\tfake - OS specific fake start without go\n" +#endif "\tgo - start OS"; #endif diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index 484a6c6ce0..7f99aabf8a 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -346,7 +346,7 @@ U_BOOT_CMD(fpga, 6, 1, do_fpga, "loadable FPGA image support", "[operation type] [device number] [image address] [image size]\n" "fpga operations:\n" - " dump\t[dev]\t\t\tLoad device to memory buffer\n" + " dump\t[dev] [address] [size]\tLoad device to memory buffer\n" " info\t[dev]\t\t\tlist known device information\n" " load\t[dev] [address] [size]\tLoad device from memory buffer\n" #if defined(CONFIG_CMD_FPGA_LOADP) diff --git a/common/cmd_fs.c b/common/cmd_fs.c index 0d9da113bf..e146254f6d 100644 --- a/common/cmd_fs.c +++ b/common/cmd_fs.c @@ -81,3 +81,18 @@ U_BOOT_CMD( " - List files in directory 'directory' of partition 'part' on\n" " device type 'interface' instance 'dev'." ) + +static int do_fstype_wrapper(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + return do_fs_type(cmdtp, flag, argc, argv); +} + +U_BOOT_CMD( + fstype, 4, 1, do_fstype_wrapper, + "Look up a filesystem type", + "<interface> <dev>:<part>\n" + "- print filesystem type\n" + "fstype <interface> <dev>:<part> <varname>\n" + "- set environment variable to filesystem type\n" +); diff --git a/common/cmd_gettime.c b/common/cmd_gettime.c index 320ff709fa..c48baad9a1 100644 --- a/common/cmd_gettime.c +++ b/common/cmd_gettime.c @@ -35,6 +35,6 @@ static int do_gettime(cmd_tbl_t *cmdtp, int flag, int argc, U_BOOT_CMD( gettime, 1, 1, do_gettime, - "get timer val elapsed,\n", - "get time elapsed from uboot start\n" + "get timer val elapsed", + "get time elapsed from uboot start" ); diff --git a/common/cmd_part.c b/common/cmd_part.c index 39e8666b77..c99f52735f 100644 --- a/common/cmd_part.c +++ b/common/cmd_part.c @@ -54,13 +54,31 @@ static int do_part_list(int argc, char * const argv[]) int ret; block_dev_desc_t *desc; - if (argc != 2) + if (argc < 2 || argc > 3) return CMD_RET_USAGE; ret = get_device(argv[0], argv[1], &desc); if (ret < 0) return 1; + if (argc == 3) { + int p; + char str[512] = { 0, }; + disk_partition_t info; + + for (p = 1; p < 128; p++) { + int r = get_partition_info(desc, p, &info); + + if (r == 0) { + char t[5]; + sprintf(t, "%s%d", str[0] ? " " : "", p); + strcat(str, t); + } + } + setenv(argv[2], str); + return 0; + } + print_part(desc); return 0; @@ -87,5 +105,7 @@ U_BOOT_CMD( "part uuid <interface> <dev>:<part> <varname>\n" " - set environment variable to partition UUID\n" "part list <interface> <dev>\n" - " - print a device's partition table" + " - print a device's partition table\n" + "part list <interface> <dev> <varname>\n" + " - set environment variable to the list of partitions" ); diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c index ae2714d372..64b9186d73 100644 --- a/common/cmd_ximg.c +++ b/common/cmd_ximg.c @@ -247,6 +247,8 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) puts("OK\n"); } + flush_cache(dest, len); + setenv_hex("fileaddr", data); setenv_hex("filesize", len); diff --git a/common/image-fit.c b/common/image-fit.c index 1589ee3e4f..b47d11024f 100644 --- a/common/image-fit.c +++ b/common/image-fit.c @@ -112,6 +112,33 @@ static void fit_get_debug(const void *fit, int noffset, fdt_strerror(err)); } +/** + * fit_get_subimage_count - get component (sub-image) count + * @fit: pointer to the FIT format image header + * @images_noffset: offset of images node + * + * returns: + * number of image components + */ +int fit_get_subimage_count(const void *fit, int images_noffset) +{ + int noffset; + int ndepth; + int count = 0; + + /* Process its subnodes, print out component images details */ + for (ndepth = 0, count = 0, + noffset = fdt_next_node(fit, images_noffset, &ndepth); + (noffset >= 0) && (ndepth > 0); + noffset = fdt_next_node(fit, noffset, &ndepth)) { + if (ndepth == 1) { + count++; + } + } + + return count; +} + #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_FIT_SPL_PRINT) /** * fit_print_contents - prints out the contents of the FIT format image @@ -423,7 +450,8 @@ void fit_image_print(const void *fit, int image_noffset, const char *p) } } } -#endif + +#endif /* !defined(CONFIG_SPL_BUILD) || defined(CONFIG_FIT_SPL_PRINT) */ /** * fit_get_desc - get node description property diff --git a/common/image.c b/common/image.c index ad7a46d08d..a911aa9b4d 100644 --- a/common/image.c +++ b/common/image.c @@ -756,7 +756,7 @@ int genimg_get_format(const void *img_addr) * genimg_get_image - get image from special storage (if necessary) * @img_addr: image start address * - * genimg_get_image() checks if provided image start adddress is located + * genimg_get_image() checks if provided image start address is located * in a dataflash storage. If so, image is moved to a system RAM memory. * * returns: diff --git a/configs/vexpress_aemv8a_defconfig b/configs/vexpress_aemv8a_defconfig index b463a333bc..9f4b876556 100644 --- a/configs/vexpress_aemv8a_defconfig +++ b/configs/vexpress_aemv8a_defconfig @@ -1,3 +1,3 @@ CONFIG_ARM=y -CONFIG_TARGET_VEXPRESS_AEMV8A=y +CONFIG_TARGET_VEXPRESS64_AEMV8A=y CONFIG_DEFAULT_DEVICE_TREE="vexpress64" diff --git a/configs/vexpress_aemv8a_juno_defconfig b/configs/vexpress_aemv8a_juno_defconfig new file mode 100644 index 0000000000..d28a4286e5 --- /dev/null +++ b/configs/vexpress_aemv8a_juno_defconfig @@ -0,0 +1,5 @@ +# ARM Ltd. Juno Board Reference Design +CONFIG_ARM=y +CONFIG_TARGET_VEXPRESS64_JUNO=y +CONFIG_DEFAULT_DEVICE_TREE="vexpress64" +CONFIG_SHOW_BOOT_PROGRESS=y diff --git a/configs/vexpress_aemv8a_semi_defconfig b/configs/vexpress_aemv8a_semi_defconfig index 0035ccdaec..26cf7db47f 100644 --- a/configs/vexpress_aemv8a_semi_defconfig +++ b/configs/vexpress_aemv8a_semi_defconfig @@ -1,4 +1,4 @@ -CONFIG_SYS_EXTRA_OPTIONS="SEMIHOSTING,BASE_FVP" +# Semihosted FVP fast model CONFIG_ARM=y -CONFIG_TARGET_VEXPRESS_AEMV8A=y +CONFIG_TARGET_VEXPRESS64_BASE_FVP=y CONFIG_DEFAULT_DEVICE_TREE="vexpress64" diff --git a/doc/README.distro b/doc/README.distro new file mode 100644 index 0000000000..dd0f1c7b6a --- /dev/null +++ b/doc/README.distro @@ -0,0 +1,341 @@ +/* + * (C) Copyright 2014 Red Hat Inc. + * Copyright (c) 2014-2015, NVIDIA CORPORATION. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +Generic Distro Configuration Concept +==================================== + +Linux distributions are faced with supporting a variety of boot mechanisms, +environments or bootloaders (PC BIOS, EFI, U-Boot, Barebox, ...). This makes +life complicated. Worse, bootloaders such as U-Boot have a configurable set +of features, and each board chooses to enable a different set of features. +Hence, distros typically need to have board-specific knowledge in order to +set up a bootable system. + +This document defines a common set of U-Boot features that are required for +a distro to support the board in a generic fashion. Any board wishing to +allow distros to install and boot in an out-of-the-box fashion should enable +all these features. Linux distros can then create a single set of boot +support/install logic that targets these features. This will allow distros +to install on many boards without the need for board-specific logic. + +In fact, some of these features can be implemented by any bootloader, thus +decoupling distro install/boot logic from any knowledge of the bootloader. + +This model assumes that boards will load boot configuration files from a +regular storage mechanism (eMMC, SD card, USB Disk, SATA disk, etc.) with +a standard partitioning scheme (MBR, GPT). Boards that cannnot support this +storage model are outside the scope of this document, and may still need +board-specific installer/boot-configuration support in a distro. + +To some extent, this model assumes that a board has a separate boot flash +that contains U-Boot, and that the user has somehow installed U-Boot to this +flash before running the distro installer. Even on boards that do not conform +to this aspect of the model, the extent of the board-specific support in the +distro installer logic would be to install a board-specific U-Boot package to +the boot partition partition during installation. This distro-supplied U-Boot +can still implement the same features as on any other board, and hence the +distro's boot configuration file generation logic can still be board-agnostic. + +Locating Bootable Disks +----------------------- + +Typical desktop/server PCs search all (or a user-defined subset of) attached +storage devices for a bootable partition, then load the bootloader or boot +configuration files from there. A U-Boot board port that enables the features +mentioned in this document will search for boot configuration files in the +same way. + +Thus, distros do not need to manipulate any kind of bootloader-specific +configuration data to indicate which storage device the system should boot +from. + +Distros simply need to install the boot configuration files (see next +section) in an ext2/3/4 or FAT partition, mark the partition bootable (via +the MBR bootable flag, or GPT legacy_bios_bootable attribute), and U-Boot (or +any other bootloader) will find those boot files and execute them. This is +conceptually identical to creating a grub2 configuration file on a desktop +PC. + +Note that in the absense of any partition that is explicitly marked bootable, +U-Boot falls back to searching the first valid partition of a disk for boot +configuration files. Other bootloaders are recommended to do the same, since +I believe that partition table bootable flags aren't so commonly used outside +the realm of x86 PCs. + +U-Boot can also search for boot configuration files from a TFTP server. + +Boot Configuration Files +------------------------ + +The standard format for boot configuration files is that of extlinux.conf, as +handled by U-Boot's "syslinux" (disk) or "pxe boot" (network). This is roughly +as specified at: + +http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/ + +... with the exceptions that the BootLoaderSpec document: + +* Prescribes a separate configuration per boot menu option, whereas U-Boot + lumps all options into a single extlinux.conf file. Hence, U-Boot searches + for /extlinux/extlinux.conf then /boot/extlinux/extlinux.conf on disk, or + pxelinux.cfg/default over the network. + +* Does not document the fdtdir option, which automatically selects the DTB to + pass to the kernel. + +One example extlinux.conf generated by the Fedora installer is: + +------------------------------------------------------------ +# extlinux.conf generated by anaconda + +ui menu.c32 + +menu autoboot Welcome to Fedora. Automatic boot in # second{,s}. Press a key for options. +menu title Fedora Boot Options. +menu hidden + +timeout 50 +#totaltimeout 9000 + +default Fedora (3.17.0-0.rc4.git2.1.fc22.armv7hl+lpae) 22 (Rawhide) + +label Fedora (3.17.0-0.rc4.git2.1.fc22.armv7hl) 22 (Rawhide) + kernel /boot/vmlinuz-3.17.0-0.rc4.git2.1.fc22.armv7hl + append ro root=UUID=8eac677f-8ea8-4270-8479-d5ddbb797450 console=ttyS0,115200n8 LANG=en_US.UTF-8 drm.debug=0xf + fdtdir /boot/dtb-3.17.0-0.rc4.git2.1.fc22.armv7hl + initrd /boot/initramfs-3.17.0-0.rc4.git2.1.fc22.armv7hl.img + +label Fedora (3.17.0-0.rc4.git2.1.fc22.armv7hl+lpae) 22 (Rawhide) + kernel /boot/vmlinuz-3.17.0-0.rc4.git2.1.fc22.armv7hl+lpae + append ro root=UUID=8eac677f-8ea8-4270-8479-d5ddbb797450 console=ttyS0,115200n8 LANG=en_US.UTF-8 drm.debug=0xf + fdtdir /boot/dtb-3.17.0-0.rc4.git2.1.fc22.armv7hl+lpae + initrd /boot/initramfs-3.17.0-0.rc4.git2.1.fc22.armv7hl+lpae.img + +label Fedora-0-rescue-8f6ba7b039524e0eb957d2c9203f04bc (0-rescue-8f6ba7b039524e0eb957d2c9203f04bc) + kernel /boot/vmlinuz-0-rescue-8f6ba7b039524e0eb957d2c9203f04bc + initrd /boot/initramfs-0-rescue-8f6ba7b039524e0eb957d2c9203f04bc.img + append ro root=UUID=8eac677f-8ea8-4270-8479-d5ddbb797450 console=ttyS0,115200n8 + fdtdir /boot/dtb-3.16.0-0.rc6.git1.1.fc22.armv7hl+lpae +------------------------------------------------------------ + +Another hand-crafted network boot configuration file is: + +------------------------------------------------------------ +TIMEOUT 100 + +MENU TITLE TFTP boot options + +LABEL jetson-tk1-emmc + MENU LABEL ../zImage root on Jetson TK1 eMMC + LINUX ../zImage + FDTDIR ../ + APPEND console=ttyS0,115200n8 console=tty1 loglevel=8 rootwait rw earlyprintk root=PARTUUID=80a5a8e9-c744-491a-93c1-4f4194fd690b + +LABEL venice2-emmc + MENU LABEL ../zImage root on Venice2 eMMC + LINUX ../zImage + FDTDIR ../ + APPEND console=ttyS0,115200n8 console=tty1 loglevel=8 rootwait rw earlyprintk root=PARTUUID=5f71e06f-be08-48ed-b1ef-ee4800cc860f + +LABEL sdcard + MENU LABEL ../zImage, root on 2GB sdcard + LINUX ../zImage + FDTDIR ../ + APPEND console=ttyS0,115200n8 console=tty1 loglevel=8 rootwait rw earlyprintk root=PARTUUID=b2f82cda-2535-4779-b467-094a210fbae7 + +LABEL fedora-installer-fk + MENU LABEL Fedora installer w/ Fedora kernel + LINUX fedora-installer/vmlinuz + INITRD fedora-installer/initrd.img.orig + FDTDIR fedora-installer/dtb + APPEND loglevel=8 ip=dhcp inst.repo=http://10.0.0.2/mirrors/fedora/linux/development/rawhide/armhfp/os/ rd.shell cma=64M +------------------------------------------------------------ + +U-Boot Implementation +===================== + +Enabling the distro options +--------------------------- + +In your board configuration file, include the following: + +------------------------------------------------------------ +#ifndef CONFIG_SPL_BUILD +#include <config_distro_defaults.h> +#include <config_distro_bootcmd.h> +#endif +------------------------------------------------------------ + +The first of those headers primarily enables a core set of U-Boot features, +such as support for MBR and GPT partitions, ext* and FAT filesystems, booting +raw zImage and initrd (rather than FIT- or uImage-wrapped files), etc. Network +boot support is also enabled here, which is useful in order to boot distro +installers given that distros do not commonly distribute bootable install +media for non-PC targets at present. + +Finally, a few options that are mostly relevant only when using U-Boot- +specific boot.scr scripts are enabled. This enables distros to generate a +U-Boot-specific boot.scr script rather than extlinux.conf as the boot +configuration file. While doing so is fully supported, and +<config_distro_defaults.h> exposes enough parameterization to boot.scr to +allow for board-agnostic boot.scr content, this document recommends that +distros generate extlinux.conf rather than boot.scr. extlinux.conf is intended +to work across multiple bootloaders, whereas boot.scr will only work with +U-Boot. TODO: document the contract between U-Boot and boot.scr re: which +environment variables a generic boot.scr may rely upon. + +The second of those headers sets up the default environment so that $bootcmd +is defined in a way that searches attached disks for boot configuration files, +and executes them if found. + +Required Environment Variables +------------------------------ + +The U-Boot "syslinux" and "pxe boot" commands require a number of environment +variables be set. Default values for these variables are often hard-coded into +CONFIG_EXTRA_ENV_SETTINGS in the board's U-Boot configuration file, so that +the user doesn't have to configure them. + +fdt_addr: + + Mandatory for any system that provides the DTB in HW (e.g. ROM) and wishes + to pass that DTB to Linux, rather than loading a DTB from the boot + filesystem. Prohibited for any other system. + + If specified a DTB to boot the system must be available at the given + address. + +fdt_addr_r: + + Mandatory. The location in RAM where the DTB will be loaded or copied to when + processing the fdtdir/devicetreedir or fdt/devicetree options in + extlinux.conf. + + This is mandatory even when fdt_addr is provided, since extlinux.conf must + always be able to provide a DTB which overrides any copy provided by the HW. + + A size of 1MB for the FDT/DTB seems reasonable. + +ramdisk_addr_r: + + Mandatory. The location in RAM where the initial ramdisk will be loaded to + when processing the initrd option in extlinux.conf. + + It is recommended that this location be highest in RAM out of fdt_addr_, + kernel_addr_r, and ramdisk_addr_r, so that the RAM disk can vary in size + and use any available RAM. + +kernel_addr_r: + + Mandatory. The location in RAM where the kernel will be loaded to when + processing the kernel option in the extlinux.conf. + + The kernel should be located within the first 128M of RAM in order for the + kernel CONFIG_AUTO_ZRELADDR option to work, which is likely enabled on any + distro kernel. Since the kernel will decompress itself to 0x8000 after the + start of RAM, kernel_addr_rshould not overlap that area, or the kernel will + have to copy itself somewhere else first before decompression. + + A size of 16MB for the kernel is likely adequate. + +pxe_addr_r: + + Mandatory. The location in RAM where extlinux.conf will be loaded to prior + to processing. + + A size of 1MB for extlinux.conf is more than adequate. + +scriptaddr: + + Mandatory, if the boot script is boot.scr rather than extlinux.conf. The + location in RAM where boot.scr will be loaded to prior to execution. + + A size of 1MB for extlinux.conf is more than adequate. + +For suggestions on memory locations for ARM systems, you must follow the +guidelines specified in Documentation/arm/Booting in the Linux kernel tree. + +For a commented example of setting these values, please see the definition of +MEM_LAYOUT_ENV_SETTINGS in include/configs/tegra124-common.h. + +Boot Target Configuration +------------------------- + +<config_distro_bootcmd.h> defines $bootcmd and many helper command variables +that automatically search attached disks for boot configuration files and +execute them. Boards must provide configure <config_distro_bootcmd.h> so that +it supports the correct set of possible boot device types. To provide this +configuration, simply define macro BOOT_TARGET_DEVICES prior to including +<config_distro_bootcmd.h>. For example: + +------------------------------------------------------------ +#ifndef CONFIG_SPL_BUILD +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> +#endif +------------------------------------------------------------ + +Each entry in the macro defines a single boot device (e.g. a specific eMMC +device or SD card) or type of boot device (e.g. USB disk). The parameters to +the func macro (passed in by the internal implementation of the header) are: + +- Upper-case disk type (MMC, SATA, SCSI, IDE, USB, DHCP, PXE). +- Lower-case disk type (same options as above). +- ID of the specific disk (MMC only) or ignored for other types. + +User Configuration +================== + +Once the user has installed U-Boot, it is expected that the environment will +be reset to the default values in order to enable $bootcmd and friends, as set +up by <config_distro_bootcmd.h>. After this, various environment variables may +be altered to influence the boot process: + +boot_targets: + + The list of boot locations searched. + + Example: mmc0, mmc1, usb, pxe + + Entries may be removed or re-ordered in this list to affect the boot order. + +boot_prefixes: + + For disk-based booting, the list of directories within a partition that are + searched for boot configuration files (extlinux.conf, boot.scr). + + Example: / /boot/ + + Entries may be removed or re-ordered in this list to affect the set of + directories which are searched. + +boot_scripts: + + The name of U-Boot style boot.scr files that $bootcmd searches for. + + Example: boot.scr.uimg boot.scr + + (Typically we expect extlinux.conf to be used, but execution of boot.scr is + maintained for backwards-compatibility.) + + Entries may be removed or re-ordered in this list to affect the set of + filenames which are supported. + +scan_dev_for_extlinux: + + If you want to disable extlinux.conf on all disks, set the value to something + innocuous, e.g. setenv scan_dev_for_extlinux true. + +scan_dev_for_scripts: + + If you want to disable boot.scr on all disks, set the value to something + innocuous, e.g. setenv scan_dev_for_scripts true. diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt index b47ce73b83..427ea498b4 100644 --- a/doc/uImage.FIT/source_file_format.txt +++ b/doc/uImage.FIT/source_file_format.txt @@ -159,17 +159,17 @@ the '/images' node should have the following layout: - description : Textual description of the component sub-image - type : Name of component sub-image type, supported types are: "standalone", "kernel", "ramdisk", "firmware", "script", "filesystem", - "flat_dt" and others (see uimage_type in common/images.c). + "flat_dt" and others (see uimage_type in common/image.c). - data : Path to the external file which contains this node's binary data. - compression : Compression used by included data. Supported compressions are "gzip" and "bzip2". If no compression is used compression property should be set to "none". Conditionally mandatory property: - - os : OS name, mandatory for type="kernel", valid OS names are: "openbsd", - "netbsd", "freebsd", "4_4bsd", "linux", "svr4", "esix", "solaris", "irix", - "sco", "dell", "ncr", "lynxos", "vxworks", "psos", "qnx", "u_boot", - "rtems", "unity", "integrity". + - os : OS name, mandatory for types "kernel" and "ramdisk". Valid OS names + are: "openbsd", "netbsd", "freebsd", "4_4bsd", "linux", "svr4", "esix", + "solaris", "irix", "sco", "dell", "ncr", "lynxos", "vxworks", "psos", "qnx", + "u_boot", "rtems", "unity", "integrity". - arch : Architecture name, mandatory for types: "standalone", "kernel", "firmware", "ramdisk" and "fdt". Valid architecture names are: "alpha", "arm", "i386", "ia64", "mips", "mips64", "ppc", "s390", "sh", "sparc", diff --git a/doc/uImage.FIT/verified-boot.txt b/doc/uImage.FIT/verified-boot.txt index 3c83fbc2c1..e639e7ae71 100644 --- a/doc/uImage.FIT/verified-boot.txt +++ b/doc/uImage.FIT/verified-boot.txt @@ -64,7 +64,7 @@ software from updatable memory. It is critical that the public key be secure and cannot be tampered with. It can be stored in read-only memory, or perhaps protected by other on-chip -crypto provided by some modern SOCs. If the public key can ben changed, then +crypto provided by some modern SOCs. If the public key can be changed, then the verification is worthless. @@ -87,7 +87,7 @@ affect the whole change. Flattened Image Tree (FIT) -------------------------- -The FIT format is alreay widely used in U-Boot. It is a flattened device +The FIT format is already widely used in U-Boot. It is a flattened device tree (FDT) in a particular format, with images contained within. FITs include hashes to verify images, so it is relatively straightforward to add signatures as well. diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 6531030463..cd4422215f 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -4927,22 +4927,23 @@ void fill_rx(struct e1000_hw *hw) { struct e1000_rx_desc *rd; - uint32_t flush_start, flush_end; + unsigned long flush_start, flush_end; rx_last = rx_tail; rd = rx_base + rx_tail; rx_tail = (rx_tail + 1) % 8; memset(rd, 0, 16); - rd->buffer_addr = cpu_to_le64((u32)packet); + rd->buffer_addr = cpu_to_le64((unsigned long)packet); /* * Make sure there are no stale data in WB over this area, which * might get written into the memory while the e1000 also writes * into the same memory area. */ - invalidate_dcache_range((u32)packet, (u32)packet + 4096); + invalidate_dcache_range((unsigned long)packet, + (unsigned long)packet + 4096); /* Dump the DMA descriptor into RAM. */ - flush_start = ((u32)rd) & ~(ARCH_DMA_MINALIGN - 1); + flush_start = ((unsigned long)rd) & ~(ARCH_DMA_MINALIGN - 1); flush_end = flush_start + roundup(sizeof(*rd), ARCH_DMA_MINALIGN); flush_dcache_range(flush_start, flush_end); @@ -4963,7 +4964,7 @@ e1000_configure_tx(struct e1000_hw *hw) unsigned long tipg, tarc; uint32_t ipgr1, ipgr2; - E1000_WRITE_REG(hw, TDBAL, (u32) tx_base); + E1000_WRITE_REG(hw, TDBAL, (unsigned long)tx_base); E1000_WRITE_REG(hw, TDBAH, 0); E1000_WRITE_REG(hw, TDLEN, 128); @@ -5107,7 +5108,7 @@ e1000_configure_rx(struct e1000_hw *hw) E1000_WRITE_FLUSH(hw); } /* Setup the Base and Length of the Rx Descriptor Ring */ - E1000_WRITE_REG(hw, RDBAL, (u32) rx_base); + E1000_WRITE_REG(hw, RDBAL, (unsigned long)rx_base); E1000_WRITE_REG(hw, RDBAH, 0); E1000_WRITE_REG(hw, RDLEN, 128); @@ -5138,14 +5139,14 @@ e1000_poll(struct eth_device *nic) { struct e1000_hw *hw = nic->priv; struct e1000_rx_desc *rd; - uint32_t inval_start, inval_end; + unsigned long inval_start, inval_end; uint32_t len; /* return true if there's an ethernet packet ready to read */ rd = rx_base + rx_last; /* Re-load the descriptor from RAM. */ - inval_start = ((u32)rd) & ~(ARCH_DMA_MINALIGN - 1); + inval_start = ((unsigned long)rd) & ~(ARCH_DMA_MINALIGN - 1); inval_end = inval_start + roundup(sizeof(*rd), ARCH_DMA_MINALIGN); invalidate_dcache_range(inval_start, inval_end); @@ -5154,8 +5155,9 @@ e1000_poll(struct eth_device *nic) /*DEBUGOUT("recv: packet len=%d \n", rd->length); */ /* Packet received, make sure the data are re-loaded from RAM. */ len = le32_to_cpu(rd->length); - invalidate_dcache_range((u32)packet, - (u32)packet + roundup(len, ARCH_DMA_MINALIGN)); + invalidate_dcache_range((unsigned long)packet, + (unsigned long)packet + + roundup(len, ARCH_DMA_MINALIGN)); NetReceive((uchar *)packet, len); fill_rx(hw); return 1; @@ -5170,7 +5172,7 @@ static int e1000_transmit(struct eth_device *nic, void *txpacket, int length) struct e1000_hw *hw = nic->priv; struct e1000_tx_desc *txp; int i = 0; - uint32_t flush_start, flush_end; + unsigned long flush_start, flush_end; txp = tx_base + tx_tail; tx_tail = (tx_tail + 1) % 8; @@ -5180,10 +5182,11 @@ static int e1000_transmit(struct eth_device *nic, void *txpacket, int length) txp->upper.data = 0; /* Dump the packet into RAM so e1000 can pick them. */ - flush_dcache_range((u32)nv_packet, - (u32)nv_packet + roundup(length, ARCH_DMA_MINALIGN)); + flush_dcache_range((unsigned long)nv_packet, + (unsigned long)nv_packet + + roundup(length, ARCH_DMA_MINALIGN)); /* Dump the descriptor into RAM as well. */ - flush_start = ((u32)txp) & ~(ARCH_DMA_MINALIGN - 1); + flush_start = ((unsigned long)txp) & ~(ARCH_DMA_MINALIGN - 1); flush_end = flush_start + roundup(sizeof(*txp), ARCH_DMA_MINALIGN); flush_dcache_range(flush_start, flush_end); diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c index eb7659177b..5729a152e5 100644 --- a/drivers/pci/pci_rom.c +++ b/drivers/pci/pci_rom.c @@ -98,7 +98,7 @@ static int pci_rom_probe(pci_dev_t dev, uint class, rom_address | PCI_ROM_ADDRESS_ENABLE); #endif debug("Option ROM address %x\n", rom_address); - rom_header = (struct pci_rom_header *)rom_address; + rom_header = (struct pci_rom_header *)(unsigned long)rom_address; debug("PCI expansion ROM, signature %#04x, INIT size %#04x, data ptr %#04x\n", le16_to_cpu(rom_header->signature), @@ -79,6 +79,7 @@ static inline int fs_uuid_unsupported(char *uuid_str) struct fstype_info { int fstype; + char *name; /* * Is it legal to pass NULL as .probe()'s fs_dev_desc parameter? This * should be false in most cases. For "virtual" filesystems which @@ -105,6 +106,7 @@ static struct fstype_info fstypes[] = { #ifdef CONFIG_FS_FAT { .fstype = FS_TYPE_FAT, + .name = "fat", .null_dev_desc_ok = false, .probe = fat_set_blk_dev, .close = fat_close, @@ -123,6 +125,7 @@ static struct fstype_info fstypes[] = { #ifdef CONFIG_FS_EXT4 { .fstype = FS_TYPE_EXT, + .name = "ext4", .null_dev_desc_ok = false, .probe = ext4fs_probe, .close = ext4fs_close, @@ -141,6 +144,7 @@ static struct fstype_info fstypes[] = { #ifdef CONFIG_SANDBOX { .fstype = FS_TYPE_SANDBOX, + .name = "sandbox", .null_dev_desc_ok = true, .probe = sandbox_fs_set_blk_dev, .close = sandbox_fs_close, @@ -154,6 +158,7 @@ static struct fstype_info fstypes[] = { #endif { .fstype = FS_TYPE_ANY, + .name = "unsupported", .null_dev_desc_ok = true, .probe = fs_probe_unsupported, .close = fs_close_unsupported, @@ -190,6 +195,7 @@ int fs_set_blk_dev(const char *ifname, const char *dev_part_str, int fstype) if (!relocated) { for (i = 0, info = fstypes; i < ARRAY_SIZE(fstypes); i++, info++) { + info->name += gd->reloc_off; info->probe += gd->reloc_off; info->close += gd->reloc_off; info->ls += gd->reloc_off; @@ -503,3 +509,24 @@ int do_fs_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], return CMD_RET_SUCCESS; } + +int do_fs_type(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + struct fstype_info *info; + + if (argc < 3 || argc > 4) + return CMD_RET_USAGE; + + if (fs_set_blk_dev(argv[1], argv[2], FS_TYPE_ANY)) + return 1; + + info = fs_get_info(fs_type); + + if (argc == 4) + setenv(argv[3], info->name); + else + printf("%s\n", info->name); + + return CMD_RET_SUCCESS; +} + diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index becbe3fa7c..49674f4537 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -13,7 +13,7 @@ #define BOOTENV_SHARED_BLKDEV_BODY(devtypel) \ "if " #devtypel " dev ${devnum}; then " \ "setenv devtype " #devtypel "; " \ - "run scan_dev_for_boot; " \ + "run scan_dev_for_boot_part; " \ "fi\0" #define BOOTENV_SHARED_BLKDEV(devtypel) \ @@ -110,7 +110,7 @@ #define BOOTENV_DEV_DHCP(devtypeu, devtypel, instance) \ "bootcmd_dhcp=" \ BOOTENV_RUN_USB_INIT \ - "if dhcp ${scriptaddr} boot.scr.uimg; then " \ + "if dhcp ${scriptaddr} ${boot_script_dhcp}; then " \ "source ${scriptaddr}; " \ "fi\0" #define BOOTENV_DEV_NAME_DHCP(devtypeu, devtypel, instance) \ @@ -154,8 +154,8 @@ BOOTENV_SHARED_IDE \ "boot_prefixes=/ /boot/\0" \ "boot_scripts=boot.scr.uimg boot.scr\0" \ + "boot_script_dhcp=boot.scr.uimg\0" \ BOOTENV_BOOT_TARGETS \ - "bootpart=1\0" \ \ "boot_extlinux=" \ "sysboot ${devtype} ${devnum}:${bootpart} any " \ @@ -186,17 +186,30 @@ "done\0" \ \ "scan_dev_for_boot=" \ - "echo Scanning ${devtype} ${devnum}...; " \ + "echo Scanning ${devtype} ${devnum}:${bootpart}...; " \ "for prefix in ${boot_prefixes}; do " \ "run scan_dev_for_extlinux; " \ "run scan_dev_for_scripts; " \ "done\0" \ \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "for bootpart in ${devplist}; do " \ + "if fstype ${devtype} ${devnum}:${bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + \ BOOT_TARGET_DEVICES(BOOTENV_DEV) \ \ - "bootcmd=" BOOTENV_SET_SCSI_NEED_INIT \ + "distro_bootcmd=" BOOTENV_SET_SCSI_NEED_INIT \ "for target in ${boot_targets}; do " \ "run bootcmd_${target}; " \ "done\0" +#ifndef CONFIG_BOOTCOMMAND +#define CONFIG_BOOTCOMMAND "run distro_bootcmd" +#endif + #endif /* _CONFIG_CMD_DISTRO_BOOTCMD_H */ diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 027d78b591..7fb28a54ba 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -11,9 +11,9 @@ /* We use generic board for v8 Versatile Express */ #define CONFIG_SYS_GENERIC_BOARD -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #ifndef CONFIG_SEMIHOSTING -#error CONFIG_BASE_FVP requires CONFIG_SEMIHOSTING +#error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING #endif #define CONFIG_BOARD_LATE_INIT #define CONFIG_ARMV8_SWITCH_TO_EL1 @@ -21,8 +21,9 @@ #define CONFIG_REMAKE_ELF -#ifndef CONFIG_BASE_FVP -/* Base FVP not using GICv3 yet */ +#if !defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) && \ + !defined(CONFIG_TARGET_VEXPRESS64_JUNO) +/* Base FVP and Juno not using GICv3 yet */ #define CONFIG_GICV3 #endif @@ -40,10 +41,13 @@ #define CONFIG_BOOTP_VCI_STRING "U-boot.armv8.vexpress_aemv8a" /* Link Definitions */ -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP /* ATF loads u-boot here for BASE_FVP model */ #define CONFIG_SYS_TEXT_BASE 0x88000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) +#elif CONFIG_TARGET_VEXPRESS64_JUNO +#define CONFIG_SYS_TEXT_BASE 0xe0000000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) #else #define CONFIG_SYS_TEXT_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) @@ -54,7 +58,7 @@ /* SMP Spin Table Definitions */ -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x03f00000) #else #define CPU_RELEASE_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) @@ -88,10 +92,15 @@ #define V2M_KMI0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6)) #define V2M_KMI1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7)) +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +#define V2M_UART0 0x7ff80000 +#define V2M_UART1 0x7ff70000 +#else /* Not Juno */ #define V2M_UART0 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9)) #define V2M_UART1 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10)) #define V2M_UART2 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11)) #define V2M_UART3 (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12)) +#endif #define V2M_WDT (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15)) @@ -119,9 +128,12 @@ #define GICR_BASE (0x2f100000) #else -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #define GICD_BASE (0x2f000000) #define GICC_BASE (0x2c000000) +#elif CONFIG_TARGET_VEXPRESS64_JUNO +#define GICD_BASE (0x2C010000) +#define GICC_BASE (0x2C02f000) #else #define GICD_BASE (0x2C001000) #define GICC_BASE (0x2C002000) @@ -140,7 +152,11 @@ /* PL011 Serial Configuration */ #define CONFIG_PL011_SERIAL +#ifdef CONFIG_TARGET_VEXPRESS64_JUNO +#define CONFIG_PL011_CLOCK 7273800 +#else #define CONFIG_PL011_CLOCK 24000000 +#endif #define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \ (void *)CONFIG_SYS_SERIAL1} #define CONFIG_CONS_INDEX 0 @@ -161,6 +177,7 @@ #define CONFIG_CMD_ENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI +#define CONFIG_CMD_LOADB #define CONFIG_CMD_MEMORY #define CONFIG_CMD_MII #define CONFIG_CMD_NET @@ -191,7 +208,7 @@ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 /* Initial environment variables */ -#ifdef CONFIG_BASE_FVP +#ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_name=uImage\0" \ "kernel_addr_r=0x80000000\0" \ diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 7e78f8ac8f..2dea921045 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -122,7 +122,7 @@ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_SYS_L2CACHE_OFF 1 #define CONFIG_INITRD_TAG 1 - +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_OF_LIBFDT 1 /* Size of malloc() pool */ diff --git a/include/fs.h b/include/fs.h index ffb6ce7ada..fd1e4ab1c0 100644 --- a/include/fs.h +++ b/include/fs.h @@ -109,4 +109,10 @@ int do_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], int do_fs_uuid(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], int fstype); +/* + * Determine the type of the specified filesystem and print it. Optionally it is + * possible to store the type directly in env. + */ +int do_fs_type(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); + #endif /* _FS_H */ diff --git a/include/image.h b/include/image.h index dcbc72fc1e..0e6af00c16 100644 --- a/include/image.h +++ b/include/image.h @@ -751,6 +751,7 @@ int fit_parse_conf(const char *spec, ulong addr_curr, int fit_parse_subimage(const char *spec, ulong addr_curr, ulong *addr, const char **image_name); +int fit_get_subimage_count(const void *fit, int images_noffset); void fit_print_contents(const void *fit); void fit_image_print(const void *fit, int noffset, const char *p); diff --git a/include/linker_lists.h b/include/linker_lists.h index d37fba44dc..940c871281 100644 --- a/include/linker_lists.h +++ b/include/linker_lists.h @@ -23,7 +23,7 @@ /** * A linker list is constructed by grouping together linker input - * sections, each containning one entry of the list. Each input section + * sections, each containing one entry of the list. Each input section * contains a constant initialized variable which holds the entry's * content. Linker list input sections are constructed from the list * and entry names, plus a prefix which allows grouping all lists @@ -39,7 +39,7 @@ * This ensures uniqueness for both input section and C variable name. * * Note that the names differ only in the first character, "." for the - * setion and "_" for the variable, so that the linker cannot confuse + * section and "_" for the variable, so that the linker cannot confuse * section and symbol names. From now on, both names will be referred * to as * diff --git a/test/image/test-imagetools.sh b/test/image/test-imagetools.sh index 9e299e1e57..952f975af1 100755 --- a/test/image/test-imagetools.sh +++ b/test/image/test-imagetools.sh @@ -13,9 +13,11 @@ # ./test/image/test-imagetools.sh BASEDIR=sandbox -SRCDIR=sandbox/boot +SRCDIR=${BASEDIR}/boot IMAGE_NAME="v1.0-test" -IMAGE=linux.img +IMAGE_MULTI=linux.img +IMAGE_FIT_ITS=linux.its +IMAGE_FIT_ITB=linux.itb DATAFILE0=vmlinuz DATAFILE1=initrd.img DATAFILE2=System.map @@ -34,14 +36,17 @@ cleanup() for file in ${DATAFILES}; do rm -f ${file} ${SRCDIR}/${file} done - rm -f ${IMAGE} ${DUMPIMAGE_LIST} ${MKIMAGE_LIST} ${TEST_OUT} + rm -f ${IMAGE_MULTI} + rm -f ${DUMPIMAGE_LIST} + rm -f ${MKIMAGE_LIST} + rm -f ${TEST_OUT} rmdir ${SRCDIR} } # Check that two files are the same assert_equal() { - if ! diff $1 $2; then + if ! diff -u $1 $2; then echo "Failed." cleanup exit 1 @@ -82,35 +87,103 @@ do_cmd_redir() ${cmd} >${redir} } -# Write files into an image -create_image() +# Write files into an multi-file image +create_multi_image() { local files="${SRCDIR}/${DATAFILE0}:${SRCDIR}/${DATAFILE1}" files+=":${SRCDIR}/${DATAFILE2}" - echo -e "\nBuilding image..." + echo -e "\nBuilding multi-file image..." do_cmd ${MKIMAGE} -A x86 -O linux -T multi -n \"${IMAGE_NAME}\" \ - -d ${files} ${IMAGE} + -d ${files} ${IMAGE_MULTI} echo "done." } -# Extract files from an image -extract_image() +# Extract files from an multi-file image +extract_multi_image() { - echo -e "\nExtracting image contents..." - do_cmd ${DUMPIMAGE} -i ${IMAGE} -p 0 ${DATAFILE0} - do_cmd ${DUMPIMAGE} -i ${IMAGE} -p 1 ${DATAFILE1} - do_cmd ${DUMPIMAGE} -i ${IMAGE} -p 2 ${DATAFILE2} - do_cmd ${DUMPIMAGE} -i ${IMAGE} -p 2 ${DATAFILE2} -o ${TEST_OUT} + echo -e "\nExtracting multi-file image contents..." + do_cmd ${DUMPIMAGE} -T multi -i ${IMAGE_MULTI} -p 0 ${DATAFILE0} + do_cmd ${DUMPIMAGE} -T multi -i ${IMAGE_MULTI} -p 1 ${DATAFILE1} + do_cmd ${DUMPIMAGE} -T multi -i ${IMAGE_MULTI} -p 2 ${DATAFILE2} + do_cmd ${DUMPIMAGE} -T multi -i ${IMAGE_MULTI} -p 2 ${DATAFILE2} -o ${TEST_OUT} + echo "done." +} + +# Write files into a FIT image +create_fit_image() +{ + echo " \ + /dts-v1/; \ + / { \ + description = \"FIT image\"; \ + #address-cells = <1>; \ + \ + images { \ + kernel@1 { \ + description = \"kernel\"; \ + data = /incbin/(\"${DATAFILE0}\"); \ + type = \"kernel\"; \ + arch = \"sandbox\"; \ + os = \"linux\"; \ + compression = \"gzip\"; \ + load = <0x40000>; \ + entry = <0x8>; \ + }; \ + ramdisk@1 { \ + description = \"filesystem\"; \ + data = /incbin/(\"${DATAFILE1}\"); \ + type = \"ramdisk\"; \ + arch = \"sandbox\"; \ + os = \"linux\"; \ + compression = \"none\"; \ + load = <0x80000>; \ + entry = <0x16>; \ + }; \ + fdt@1 { \ + description = \"device tree\"; \ + data = /incbin/(\"${DATAFILE2}\"); \ + type = \"flat_dt\"; \ + arch = \"sandbox\"; \ + compression = \"none\"; \ + }; \ + }; \ + configurations { \ + default = \"conf@1\"; \ + conf@1 { \ + kernel = \"kernel@1\"; \ + fdt = \"fdt@1\"; \ + }; \ + }; \ + }; \ + " > ${IMAGE_FIT_ITS} + + echo -e "\nBuilding FIT image..." + do_cmd ${MKIMAGE} -f ${IMAGE_FIT_ITS} ${IMAGE_FIT_ITB} + echo "done." +} + +# Extract files from a FIT image +extract_fit_image() +{ + echo -e "\nExtracting FIT image contents..." + do_cmd ${DUMPIMAGE} -T flat_dt -i ${IMAGE_FIT_ITB} -p 0 ${DATAFILE0} + do_cmd ${DUMPIMAGE} -T flat_dt -i ${IMAGE_FIT_ITB} -p 1 ${DATAFILE1} + do_cmd ${DUMPIMAGE} -T flat_dt -i ${IMAGE_FIT_ITB} -p 2 ${DATAFILE2} + do_cmd ${DUMPIMAGE} -T flat_dt -i ${IMAGE_FIT_ITB} -p 2 ${DATAFILE2} -o ${TEST_OUT} echo "done." } # List the contents of a file +# Args: +# image filename list_image() { + local image="$1" + echo -e "\nListing image contents..." - do_cmd_redir ${MKIMAGE_LIST} ${MKIMAGE} -l ${IMAGE} - do_cmd_redir ${DUMPIMAGE_LIST} ${DUMPIMAGE} -l ${IMAGE} + do_cmd_redir ${MKIMAGE_LIST} ${MKIMAGE} -l ${image} + do_cmd_redir ${DUMPIMAGE_LIST} ${DUMPIMAGE} -l ${image} echo "done." } @@ -120,16 +193,28 @@ main() create_files - # Compress and extract multifile images, compare the result - create_image - extract_image + # Compress and extract multi-file images, compare the result + create_multi_image + extract_multi_image + for file in ${DATAFILES}; do + assert_equal ${file} ${SRCDIR}/${file} + done + assert_equal ${TEST_OUT} ${DATAFILE2} + + # List contents of multi-file image and compares output from tools + list_image ${IMAGE_MULTI} + assert_equal ${DUMPIMAGE_LIST} ${MKIMAGE_LIST} + + # Compress and extract FIT images, compare the result + create_fit_image + extract_fit_image for file in ${DATAFILES}; do assert_equal ${file} ${SRCDIR}/${file} done assert_equal ${TEST_OUT} ${DATAFILE2} - # List contents and compares output fro tools - list_image + # List contents of FIT image and compares output from tools + list_image ${IMAGE_FIT_ITB} assert_equal ${DUMPIMAGE_LIST} ${MKIMAGE_LIST} # Remove files created diff --git a/tools/Makefile b/tools/Makefile index ea76a3e7d9..6e1ce79f2f 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -124,6 +124,8 @@ HOSTLOADLIBES_dumpimage := $(HOSTLOADLIBES_mkimage) HOSTLOADLIBES_fit_info := $(HOSTLOADLIBES_mkimage) HOSTLOADLIBES_fit_check_sign := $(HOSTLOADLIBES_mkimage) +HOSTLDFLAGS += -T $(srctree)/tools/imagetool.lds + hostprogs-$(CONFIG_EXYNOS5250) += mkexynosspl hostprogs-$(CONFIG_EXYNOS5420) += mkexynosspl HOSTCFLAGS_mkexynosspl.o := -pedantic diff --git a/tools/aisimage.c b/tools/aisimage.c index 8de370a2e0..9338342cb3 100644 --- a/tools/aisimage.c +++ b/tools/aisimage.c @@ -413,19 +413,17 @@ int aisimage_check_params(struct image_tool_params *params) /* * aisimage parameters */ -static struct image_type_params aisimage_params = { - .name = "TI Davinci AIS Boot Image support", - .header_size = 0, - .hdr = NULL, - .check_image_type = aisimage_check_image_types, - .verify_header = aisimage_verify_header, - .print_header = aisimage_print_header, - .set_header = aisimage_set_header, - .check_params = aisimage_check_params, - .vrec_header = aisimage_generate, -}; - -void init_ais_image_type(void) -{ - register_image_type(&aisimage_params); -} +U_BOOT_IMAGE_TYPE( + aisimage, + "TI Davinci AIS Boot Image support", + 0, + NULL, + aisimage_check_params, + aisimage_verify_header, + aisimage_print_header, + aisimage_set_header, + NULL, + aisimage_check_image_types, + NULL, + aisimage_generate +); diff --git a/tools/atmelimage.c b/tools/atmelimage.c index c8101d2ddc..5b72ac54a6 100644 --- a/tools/atmelimage.c +++ b/tools/atmelimage.c @@ -324,19 +324,17 @@ static int atmel_vrec_header(struct image_tool_params *params, return EXIT_SUCCESS; } -static struct image_type_params atmelimage_params = { - .name = "ATMEL ROM-Boot Image support", - .header_size = 0, - .hdr = NULL, - .check_image_type = atmel_check_image_type, - .verify_header = atmel_verify_header, - .print_header = atmel_print_header, - .set_header = atmel_set_header, - .check_params = atmel_check_params, - .vrec_header = atmel_vrec_header, -}; - -void init_atmel_image_type(void) -{ - register_image_type(&atmelimage_params); -} +U_BOOT_IMAGE_TYPE( + atmelimage, + "ATMEL ROM-Boot Image support", + 0, + NULL, + atmel_check_params, + atmel_verify_header, + atmel_print_header, + atmel_set_header, + NULL, + atmel_check_image_type, + NULL, + atmel_vrec_header +); diff --git a/tools/default_image.c b/tools/default_image.c index 0a0792e503..cf5c0d4393 100644 --- a/tools/default_image.c +++ b/tools/default_image.c @@ -15,6 +15,8 @@ */ #include "imagetool.h" +#include "mkimage.h" + #include <image.h> #include <u-boot/crc.h> @@ -53,9 +55,8 @@ static int image_verify_header(unsigned char *ptr, int image_size, memcpy(hdr, ptr, sizeof(image_header_t)); if (be32_to_cpu(hdr->ih_magic) != IH_MAGIC) { - fprintf(stderr, - "%s: Bad Magic Number: \"%s\" is no valid image\n", - params->cmdname, params->imagefile); + debug("%s: Bad Magic Number: \"%s\" is no valid image\n", + params->cmdname, params->imagefile); return -FDT_ERR_BADMAGIC; } @@ -66,9 +67,8 @@ static int image_verify_header(unsigned char *ptr, int image_size, hdr->ih_hcrc = cpu_to_be32(0); /* clear for re-calculation */ if (crc32(0, data, len) != checksum) { - fprintf(stderr, - "%s: ERROR: \"%s\" has bad header checksum!\n", - params->cmdname, params->imagefile); + debug("%s: ERROR: \"%s\" has bad header checksum!\n", + params->cmdname, params->imagefile); return -FDT_ERR_BADSTATE; } @@ -77,9 +77,8 @@ static int image_verify_header(unsigned char *ptr, int image_size, checksum = be32_to_cpu(hdr->ih_dcrc); if (crc32(0, data, len) != checksum) { - fprintf(stderr, - "%s: ERROR: \"%s\" has corrupted data!\n", - params->cmdname, params->imagefile); + debug("%s: ERROR: \"%s\" has corrupted data!\n", + params->cmdname, params->imagefile); return -FDT_ERR_BADSTRUCTURE; } return 0; @@ -117,33 +116,7 @@ static void image_set_header(void *ptr, struct stat *sbuf, int ifd, image_set_hcrc(hdr, checksum); } -static int image_save_datafile(struct image_tool_params *params, - ulong file_data, ulong file_len) -{ - int dfd; - const char *datafile = params->outfile; - - dfd = open(datafile, O_RDWR | O_CREAT | O_TRUNC | O_BINARY, - S_IRUSR | S_IWUSR); - if (dfd < 0) { - fprintf(stderr, "%s: Can't open \"%s\": %s\n", - params->cmdname, datafile, strerror(errno)); - return -1; - } - - if (write(dfd, (void *)file_data, file_len) != (ssize_t)file_len) { - fprintf(stderr, "%s: Write error on \"%s\": %s\n", - params->cmdname, datafile, strerror(errno)); - close(dfd); - return -1; - } - - close(dfd); - - return 0; -} - -static int image_extract_datafile(void *ptr, struct image_tool_params *params) +static int image_extract_subimage(void *ptr, struct image_tool_params *params) { const image_header_t *hdr = (const image_header_t *)ptr; ulong file_data; @@ -170,25 +143,23 @@ static int image_extract_datafile(void *ptr, struct image_tool_params *params) } /* save the "data file" into the file system */ - return image_save_datafile(params, file_data, file_len); + return imagetool_save_subimage(params->outfile, file_data, file_len); } /* * Default image type parameters definition */ -static struct image_type_params defimage_params = { - .name = "Default Image support", - .header_size = sizeof(image_header_t), - .hdr = (void*)&header, - .check_image_type = image_check_image_types, - .verify_header = image_verify_header, - .print_header = image_print_contents, - .set_header = image_set_header, - .extract_datafile = image_extract_datafile, - .check_params = image_check_params, -}; - -void init_default_image_type(void) -{ - register_image_type(&defimage_params); -} +U_BOOT_IMAGE_TYPE( + defimage, + "Default Image support", + sizeof(image_header_t), + (void *)&header, + image_check_params, + image_verify_header, + image_print_contents, + image_set_header, + image_extract_subimage, + image_check_image_types, + NULL, + NULL +); diff --git a/tools/dumpimage.c b/tools/dumpimage.c index 542ee28210..75a5d4762c 100644 --- a/tools/dumpimage.c +++ b/tools/dumpimage.c @@ -12,112 +12,13 @@ static void usage(void); -/* image_type_params linked list to maintain registered image types supports */ -static struct image_type_params *dumpimage_tparams; - /* parameters initialized by core will be used by the image type code */ static struct image_tool_params params = { .type = IH_TYPE_KERNEL, }; -/** - * dumpimage_register() - register respective image generation/list support - * - * the input struct image_type_params is checked and appended to the link - * list, if the input structure is already registered, issue an error - * - * @tparams: Image type parameters - */ -static void dumpimage_register(struct image_type_params *tparams) -{ - struct image_type_params **tp; - - if (!tparams) { - fprintf(stderr, "%s: %s: Null input\n", params.cmdname, - __func__); - exit(EXIT_FAILURE); - } - - /* scan the linked list, check for registry and point the last one */ - for (tp = &dumpimage_tparams; *tp != NULL; tp = &(*tp)->next) { - if (!strcmp((*tp)->name, tparams->name)) { - fprintf(stderr, "%s: %s already registered\n", - params.cmdname, tparams->name); - return; - } - } - - /* add input struct entry at the end of link list */ - *tp = tparams; - /* mark input entry as last entry in the link list */ - tparams->next = NULL; - - debug("Registered %s\n", tparams->name); -} - -/** - * dumpimage_get_type() - find the image type params for a given image type - * - * Scan all registered image types and check the input type_id for each - * supported image type - * - * @return respective image_type_params pointer. If the input type is not - * supported by any of registered image types, returns NULL - */ -static struct image_type_params *dumpimage_get_type(int type) -{ - struct image_type_params *curr; - - for (curr = dumpimage_tparams; curr != NULL; curr = curr->next) { - if (curr->check_image_type) { - if (!curr->check_image_type(type)) - return curr; - } - } - return NULL; -} - /* - * dumpimage_verify_print_header() - verifies the image header - * - * Scan registered image types and verify the image_header for each - * supported image type. If verification is successful, this prints - * the respective header. - * - * @return 0 on success, negative if input image format does not match with - * any of supported image types - */ -static int dumpimage_verify_print_header(void *ptr, struct stat *sbuf) -{ - int retval = -1; - struct image_type_params *curr; - - for (curr = dumpimage_tparams; curr != NULL; curr = curr->next) { - if (curr->verify_header) { - retval = curr->verify_header((unsigned char *)ptr, - sbuf->st_size, ¶ms); - if (retval != 0) - continue; - /* - * Print the image information if verify is - * successful - */ - if (curr->print_header) { - curr->print_header(ptr); - } else { - fprintf(stderr, - "%s: print_header undefined for %s\n", - params.cmdname, curr->name); - } - break; - } - } - - return retval; -} - -/* - * dumpimage_extract_datafile - + * dumpimage_extract_subimage - * * It scans all registered image types, * verifies image_header for each supported image type @@ -127,29 +28,27 @@ static int dumpimage_verify_print_header(void *ptr, struct stat *sbuf) * returns negative if input image format does not match with any of * supported image types */ -static int dumpimage_extract_datafile(void *ptr, struct stat *sbuf) +static int dumpimage_extract_subimage(struct image_type_params *tparams, + void *ptr, struct stat *sbuf) { int retval = -1; - struct image_type_params *curr; - for (curr = dumpimage_tparams; curr != NULL; curr = curr->next) { - if (curr->verify_header) { - retval = curr->verify_header((unsigned char *)ptr, - sbuf->st_size, ¶ms); - if (retval != 0) - continue; - /* - * Extract the file from the image - * if verify is successful - */ - if (curr->extract_datafile) { - curr->extract_datafile(ptr, ¶ms); - } else { - fprintf(stderr, - "%s: extract_datafile undefined for %s\n", - params.cmdname, curr->name); - break; - } + if (tparams->verify_header) { + retval = tparams->verify_header((unsigned char *)ptr, + sbuf->st_size, ¶ms); + if (retval != 0) + return -1; + /* + * Extract the file from the image + * if verify is successful + */ + if (tparams->extract_subimage) { + retval = tparams->extract_subimage(ptr, ¶ms); + } else { + fprintf(stderr, + "%s: extract_subimage undefined for %s\n", + params.cmdname, tparams->name); + return -2; } } @@ -165,12 +64,9 @@ int main(int argc, char **argv) int retval = 0; struct image_type_params *tparams = NULL; - /* Init all image generation/list support */ - register_image_tool(dumpimage_register); - params.cmdname = *argv; - while ((opt = getopt(argc, argv, "li:o:p:V")) != -1) { + while ((opt = getopt(argc, argv, "li:o:T:p:V")) != -1) { switch (opt) { case 'l': params.lflag = 1; @@ -182,6 +78,12 @@ int main(int argc, char **argv) case 'o': params.outfile = optarg; break; + case 'T': + params.type = genimg_get_type_id(optarg); + if (params.type < 0) { + usage(); + } + break; case 'p': params.pflag = strtoul(optarg, &ptr, 10); if (*ptr) { @@ -196,6 +98,7 @@ int main(int argc, char **argv) exit(EXIT_SUCCESS); default: usage(); + break; } } @@ -203,9 +106,9 @@ int main(int argc, char **argv) usage(); /* set tparams as per input type_id */ - tparams = dumpimage_get_type(params.type); + tparams = imagetool_get_type(params.type); if (tparams == NULL) { - fprintf(stderr, "%s: unsupported type %s\n", + fprintf(stderr, "%s: unsupported type: %s\n", params.cmdname, genimg_get_type_name(params.type)); exit(EXIT_FAILURE); } @@ -242,7 +145,7 @@ int main(int argc, char **argv) exit(EXIT_FAILURE); } - if ((unsigned)sbuf.st_size < tparams->header_size) { + if ((uint32_t)sbuf.st_size < tparams->header_size) { fprintf(stderr, "%s: Bad size: \"%s\" is not valid image\n", params.cmdname, params.imagefile); @@ -267,13 +170,15 @@ int main(int argc, char **argv) * Extract the data files from within the matched * image type. Returns the error code if not matched */ - retval = dumpimage_extract_datafile(ptr, &sbuf); + retval = dumpimage_extract_subimage(tparams, ptr, + &sbuf); } else { /* * Print the image information for matched image type * Returns the error code if not matched */ - retval = dumpimage_verify_print_header(ptr, &sbuf); + retval = imagetool_verify_print_header(ptr, &sbuf, + tparams, ¶ms); } (void)munmap((void *)ptr, sbuf.st_size); @@ -293,9 +198,10 @@ static void usage(void) " -l ==> list image header information\n", params.cmdname); fprintf(stderr, - " %s -i image [-p position] [-o outfile] data_file\n" - " -i ==> extract from the 'image' a specific 'data_file'" - ", indexed by 'position' (starting at 0)\n", + " %s -i image -T type [-p position] [-o outfile] data_file\n" + " -i ==> extract from the 'image' a specific 'data_file'\n" + " -T ==> set image type to 'type'\n" + " -p ==> 'position' (starting at 0) of the 'data_file' inside the 'image'\n", params.cmdname); fprintf(stderr, " %s -V ==> print version information and exit\n", diff --git a/tools/fit_image.c b/tools/fit_image.c index 3ececf913f..eb2a25eeac 100644 --- a/tools/fit_image.c +++ b/tools/fit_image.c @@ -155,6 +155,97 @@ err_system: return -1; } +/** + * fit_image_extract - extract a FIT component image + * @fit: pointer to the FIT format image header + * @image_noffset: offset of the component image node + * @file_name: name of the file to store the FIT sub-image + * + * returns: + * zero in case of success or a negative value if fail. + */ +static int fit_image_extract( + const void *fit, + int image_noffset, + const char *file_name) +{ + const void *file_data; + size_t file_size = 0; + + /* get the "data" property of component at offset "image_noffset" */ + fit_image_get_data(fit, image_noffset, &file_data, &file_size); + + /* save the "file_data" into the file specified by "file_name" */ + return imagetool_save_subimage(file_name, (ulong) file_data, file_size); +} + +/** + * fit_extract_contents - retrieve a sub-image component from the FIT image + * @ptr: pointer to the FIT format image header + * @params: command line parameters + * + * returns: + * zero in case of success or a negative value if fail. + */ +static int fit_extract_contents(void *ptr, struct image_tool_params *params) +{ + int images_noffset; + int noffset; + int ndepth; + const void *fit = ptr; + int count = 0; + const char *p; + + /* Indent string is defined in header image.h */ + p = IMAGE_INDENT_STRING; + + if (!fit_check_format(fit)) { + printf("Bad FIT image format\n"); + return -1; + } + + /* Find images parent node offset */ + images_noffset = fdt_path_offset(fit, FIT_IMAGES_PATH); + if (images_noffset < 0) { + printf("Can't find images parent node '%s' (%s)\n", + FIT_IMAGES_PATH, fdt_strerror(images_noffset)); + return -1; + } + + /* Avoid any overrun */ + count = fit_get_subimage_count(fit, images_noffset); + if ((params->pflag < 0) || (count <= params->pflag)) { + printf("No such component at '%d'\n", params->pflag); + return -1; + } + + /* Process its subnodes, extract the desired component from image */ + for (ndepth = 0, count = 0, + noffset = fdt_next_node(fit, images_noffset, &ndepth); + (noffset >= 0) && (ndepth > 0); + noffset = fdt_next_node(fit, noffset, &ndepth)) { + if (ndepth == 1) { + /* + * Direct child node of the images parent node, + * i.e. component image node. + */ + if (params->pflag == count) { + printf("Extracted:\n%s Image %u (%s)\n", p, + count, fit_get_name(fit, noffset, NULL)); + + fit_image_print(fit, noffset, p); + + return fit_image_extract(fit, noffset, + params->outfile); + } + + count++; + } + } + + return 0; +} + static int fit_check_params(struct image_tool_params *params) { return ((params->dflag && (params->fflag || params->lflag)) || @@ -162,19 +253,17 @@ static int fit_check_params(struct image_tool_params *params) (params->lflag && (params->dflag || params->fflag))); } -static struct image_type_params fitimage_params = { - .name = "FIT Image support", - .header_size = sizeof(image_header_t), - .hdr = (void*)&header, - .verify_header = fit_verify_header, - .print_header = fit_print_contents, - .check_image_type = fit_check_image_types, - .fflag_handle = fit_handle_file, - .set_header = NULL, /* FIT images use DTB header */ - .check_params = fit_check_params, -}; - -void init_fit_image_type (void) -{ - register_image_type(&fitimage_params); -} +U_BOOT_IMAGE_TYPE( + fitimage, + "FIT Image support", + sizeof(image_header_t), + (void *)&header, + fit_check_params, + fit_verify_header, + fit_print_contents, + NULL, + fit_extract_contents, + fit_check_image_types, + fit_handle_file, + NULL /* FIT images use DTB header */ +); diff --git a/tools/gpimage-common.c b/tools/gpimage-common.c index b343a3aa8b..5ad52be437 100644 --- a/tools/gpimage-common.c +++ b/tools/gpimage-common.c @@ -32,7 +32,8 @@ void to_be32(uint32_t *gph_size, uint32_t *gph_load_addr) int gph_verify_header(struct gp_header *gph, int be) { - uint32_t gph_size = gph->size, gph_load_addr = gph->load_addr; + uint32_t gph_size = gph->size; + uint32_t gph_load_addr = gph->load_addr; if (be) to_be32(&gph_size, &gph_load_addr); diff --git a/tools/gpimage.c b/tools/gpimage.c index 1cabb5b612..1adc55c5fc 100644 --- a/tools/gpimage.c +++ b/tools/gpimage.c @@ -60,18 +60,17 @@ static void gpimage_set_header(void *ptr, struct stat *sbuf, int ifd, /* * gpimage parameters */ -static struct image_type_params gpimage_params = { - .name = "TI KeyStone GP Image support", - .header_size = GPIMAGE_HDR_SIZE, - .hdr = (void *)&gpimage_header, - .check_image_type = gpimage_check_image_types, - .verify_header = gpimage_verify_header, - .print_header = gpimage_print_header, - .set_header = gpimage_set_header, - .check_params = gpimage_check_params, -}; - -void init_gpimage_type(void) -{ - register_image_type(&gpimage_params); -} +U_BOOT_IMAGE_TYPE( + gpimage, + "TI KeyStone GP Image support", + GPIMAGE_HDR_SIZE, + (void *)&gpimage_header, + gpimage_check_params, + gpimage_verify_header, + gpimage_print_header, + gpimage_set_header, + NULL, + gpimage_check_image_types, + NULL, + NULL +); diff --git a/tools/imagetool.c b/tools/imagetool.c index 98717bdedd..148e4662b7 100644 --- a/tools/imagetool.c +++ b/tools/imagetool.c @@ -8,57 +8,87 @@ #include "imagetool.h" -/* - * Callback function to register a image type within a tool - */ -static imagetool_register_t register_func; +#include <image.h> -/* - * register_image_tool - - * - * The tool provides its own registration function in order to all image - * types initialize themselves. - */ -void register_image_tool(imagetool_register_t image_register) +struct image_type_params *imagetool_get_type(int type) { - /* - * Save the image tool callback function. It will be used to register - * image types within that tool - */ - register_func = image_register; + struct image_type_params *curr; + struct image_type_params *start = ll_entry_start( + struct image_type_params, image_type); + struct image_type_params *end = ll_entry_end( + struct image_type_params, image_type); - /* Init ATMEL ROM Boot Image generation/list support */ - init_atmel_image_type(); - /* Init Freescale PBL Boot image generation/list support */ - init_pbl_image_type(); - /* Init Kirkwood Boot image generation/list support */ - init_kwb_image_type(); - /* Init Freescale imx Boot image generation/list support */ - init_imx_image_type(); - /* Init Freescale mxs Boot image generation/list support */ - init_mxs_image_type(); - /* Init FIT image generation/list support */ - init_fit_image_type(); - /* Init TI OMAP Boot image generation/list support */ - init_omap_image_type(); - /* Init Default image generation/list support */ - init_default_image_type(); - /* Init Davinci UBL support */ - init_ubl_image_type(); - /* Init Davinci AIS support */ - init_ais_image_type(); - /* Init Altera SOCFPGA support */ - init_socfpga_image_type(); - /* Init TI Keystone boot image generation/list support */ - init_gpimage_type(); + for (curr = start; curr != end; curr++) { + if (curr->check_image_type) { + if (!curr->check_image_type(type)) + return curr; + } + } + return NULL; } -/* - * register_image_type - - * - * Register a image type within a tool - */ -void register_image_type(struct image_type_params *tparams) +int imagetool_verify_print_header( + void *ptr, + struct stat *sbuf, + struct image_type_params *tparams, + struct image_tool_params *params) { - register_func(tparams); + int retval = -1; + struct image_type_params *curr; + + struct image_type_params *start = ll_entry_start( + struct image_type_params, image_type); + struct image_type_params *end = ll_entry_end( + struct image_type_params, image_type); + + for (curr = start; curr != end; curr++) { + if (curr->verify_header) { + retval = curr->verify_header((unsigned char *)ptr, + sbuf->st_size, params); + + if (retval == 0) { + /* + * Print the image information if verify is + * successful + */ + if (curr->print_header) { + curr->print_header(ptr); + } else { + fprintf(stderr, + "%s: print_header undefined for %s\n", + params->cmdname, curr->name); + } + break; + } + } + } + + return retval; +} + +int imagetool_save_subimage( + const char *file_name, + ulong file_data, + ulong file_len) +{ + int dfd; + + dfd = open(file_name, O_RDWR | O_CREAT | O_TRUNC | O_BINARY, + S_IRUSR | S_IWUSR); + if (dfd < 0) { + fprintf(stderr, "Can't open \"%s\": %s\n", + file_name, strerror(errno)); + return -1; + } + + if (write(dfd, (void *)file_data, file_len) != (ssize_t)file_len) { + fprintf(stderr, "Write error on \"%s\": %s\n", + file_name, strerror(errno)); + close(dfd); + return -1; + } + + close(dfd); + + return 0; } diff --git a/tools/imagetool.h b/tools/imagetool.h index 8bce059482..f35dec71c7 100644 --- a/tools/imagetool.h +++ b/tools/imagetool.h @@ -19,6 +19,16 @@ #include <time.h> #include <unistd.h> #include <u-boot/sha1.h> + +/* define __KERNEL__ in order to get the definitions + * required by the linker list. This is probably not + * the best way to do this */ +#ifndef __KERNEL__ +#define __KERNEL__ +#include <linker_lists.h> +#undef __KERNEL__ +#endif /* __KERNEL__ */ + #include "fdt_host.h" #define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0])) @@ -100,14 +110,15 @@ struct image_type_params { void (*set_header) (void *, struct stat *, int, struct image_tool_params *); /* - * This function is used by the command to retrieve a data file from - * the image (i.e. dumpimage -i <image> -p <position> <data_file>). + * This function is used by the command to retrieve a component + * (sub-image) from the image (i.e. dumpimage -i <image> -p <position> + * <sub-image-name>). * Thus the code to extract a file from an image must be put here. * * Returns 0 if the file was successfully retrieved from the image, * or a negative value on error. */ - int (*extract_datafile) (void *, struct image_tool_params *); + int (*extract_subimage)(void *, struct image_tool_params *); /* * Some image generation support for ex (default image type) supports * more than one type_ids, this callback function is used to check @@ -127,50 +138,88 @@ struct image_type_params { */ int (*vrec_header) (struct image_tool_params *, struct image_type_params *); - /* pointer to the next registered entry in linked list */ - struct image_type_params *next; }; -/* - * Tool registration function. +/** + * imagetool_get_type() - find the image type params for a given image type + * + * It scans all registers image type supports + * checks the input type for each supported image type + * + * if successful, + * returns respective image_type_params pointer if success + * if input type_id is not supported by any of image_type_support + * returns NULL */ -typedef void (*imagetool_register_t)(struct image_type_params *); +struct image_type_params *imagetool_get_type(int type); /* - * Initializes all image types with the given registration callback - * function. - * An image tool uses this function to initialize all image types. + * imagetool_verify_print_header() - verifies the image header + * + * Scan registered image types and verify the image_header for each + * supported image type. If verification is successful, this prints + * the respective header. + * + * @return 0 on success, negative if input image format does not match with + * any of supported image types */ -void register_image_tool(imagetool_register_t image_register); +int imagetool_verify_print_header( + void *ptr, + struct stat *sbuf, + struct image_type_params *tparams, + struct image_tool_params *params); -/* - * Register a image type within a tool. - * An image type uses this function to register itself within - * all tools. +/** + * imagetool_save_subimage - store data into a file + * @file_name: name of the destination file + * @file_data: data to be written + * @file_len: the amount of data to store + * + * imagetool_save_subimage() store file_len bytes of data pointed by file_data + * into the file name by file_name. + * + * returns: + * zero in case of success or a negative value if fail. */ -void register_image_type(struct image_type_params *tparams); +int imagetool_save_subimage( + const char *file_name, + ulong file_data, + ulong file_len); /* * There is a c file associated with supported image type low level code * for ex. default_image.c, fit_image.c - * init_xxx_type() is the only function referred by image tool core to avoid - * a single lined header file, you can define them here - * - * Supported image types init functions */ -void init_default_image_type(void); -void init_atmel_image_type(void); -void init_pbl_image_type(void); -void init_ais_image_type(void); -void init_kwb_image_type(void); -void init_imx_image_type(void); -void init_mxs_image_type(void); -void init_fit_image_type(void); -void init_ubl_image_type(void); -void init_omap_image_type(void); -void init_socfpga_image_type(void); -void init_gpimage_type(void); + void pbl_load_uboot(int fd, struct image_tool_params *mparams); +#define U_BOOT_IMAGE_TYPE( \ + _id, \ + _name, \ + _header_size, \ + _header, \ + _check_params, \ + _verify_header, \ + _print_header, \ + _set_header, \ + _extract_subimage, \ + _check_image_type, \ + _fflag_handle, \ + _vrec_header \ + ) \ + ll_entry_declare(struct image_type_params, _id, image_type) = { \ + .name = _name, \ + .header_size = _header_size, \ + .hdr = _header, \ + .check_params = _check_params, \ + .verify_header = _verify_header, \ + .print_header = _print_header, \ + .set_header = _set_header, \ + .extract_subimage = _extract_subimage, \ + .check_image_type = _check_image_type, \ + .fflag_handle = _fflag_handle, \ + .vrec_header = _vrec_header \ + } + #endif /* _IMAGETOOL_H_ */ diff --git a/tools/imagetool.lds b/tools/imagetool.lds new file mode 100644 index 0000000000..7e92b4ac66 --- /dev/null +++ b/tools/imagetool.lds @@ -0,0 +1,24 @@ +/* + * Copyright (c) 2011-2012 The Chromium OS Authors. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +SECTIONS +{ + + . = ALIGN(4); + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } + + __u_boot_sandbox_option_start = .; + _u_boot_sandbox_getopt : { *(.u_boot_sandbox_getopt) } + __u_boot_sandbox_option_end = .; + + __bss_start = .; +} + +INSERT BEFORE .data; diff --git a/tools/imximage.c b/tools/imximage.c index 526b7d490d..3d37591886 100644 --- a/tools/imximage.c +++ b/tools/imximage.c @@ -694,19 +694,17 @@ static int imximage_generate(struct image_tool_params *params, /* * imximage parameters */ -static struct image_type_params imximage_params = { - .name = "Freescale i.MX Boot Image support", - .header_size = 0, - .hdr = NULL, - .check_image_type = imximage_check_image_types, - .verify_header = imximage_verify_header, - .print_header = imximage_print_header, - .set_header = imximage_set_header, - .check_params = imximage_check_params, - .vrec_header = imximage_generate, -}; - -void init_imx_image_type(void) -{ - register_image_type(&imximage_params); -} +U_BOOT_IMAGE_TYPE( + imximage, + "Freescale i.MX Boot Image support", + 0, + NULL, + imximage_check_params, + imximage_verify_header, + imximage_print_header, + imximage_set_header, + NULL, + imximage_check_image_types, + NULL, + imximage_generate +); diff --git a/tools/kwbimage.c b/tools/kwbimage.c index 807d46668b..66f459ad6b 100644 --- a/tools/kwbimage.c +++ b/tools/kwbimage.c @@ -905,19 +905,17 @@ static int kwbimage_check_params(struct image_tool_params *params) /* * kwbimage type parameters definition */ -static struct image_type_params kwbimage_params = { - .name = "Marvell MVEBU Boot Image support", - .header_size = 0, /* no fixed header size */ - .hdr = NULL, - .vrec_header = kwbimage_generate, - .check_image_type = kwbimage_check_image_types, - .verify_header = kwbimage_verify_header, - .print_header = kwbimage_print_header, - .set_header = kwbimage_set_header, - .check_params = kwbimage_check_params, -}; - -void init_kwb_image_type (void) -{ - register_image_type(&kwbimage_params); -} +U_BOOT_IMAGE_TYPE( + kwbimage, + "Marvell MVEBU Boot Image support", + 0, + NULL, + kwbimage_check_params, + kwbimage_verify_header, + kwbimage_print_header, + kwbimage_set_header, + NULL, + kwbimage_check_image_types, + NULL, + kwbimage_generate +); diff --git a/tools/mkimage.c b/tools/mkimage.c index c70408c9ba..5ccd951048 100644 --- a/tools/mkimage.c +++ b/tools/mkimage.c @@ -15,9 +15,6 @@ static void copy_file(int, const char *, int); static void usage(void); -/* image_type_params link list to maintain registered image type supports */ -struct image_type_params *mkimage_tparams = NULL; - /* parameters initialized by core will be used by the image type code */ struct image_tool_params params = { .os = IH_OS_LINUX, @@ -29,106 +26,6 @@ struct image_tool_params params = { .imagename2 = "", }; -/* - * mkimage_register - - * - * It is used to register respective image generation/list support to the - * mkimage core - * - * the input struct image_type_params is checked and appended to the link - * list, if the input structure is already registered, error - */ -void mkimage_register (struct image_type_params *tparams) -{ - struct image_type_params **tp; - - if (!tparams) { - fprintf (stderr, "%s: %s: Null input\n", - params.cmdname, __FUNCTION__); - exit (EXIT_FAILURE); - } - - /* scan the linked list, check for registry and point the last one */ - for (tp = &mkimage_tparams; *tp != NULL; tp = &(*tp)->next) { - if (!strcmp((*tp)->name, tparams->name)) { - fprintf (stderr, "%s: %s already registered\n", - params.cmdname, tparams->name); - return; - } - } - - /* add input struct entry at the end of link list */ - *tp = tparams; - /* mark input entry as last entry in the link list */ - tparams->next = NULL; - - debug ("Registered %s\n", tparams->name); -} - -/* - * mkimage_get_type - - * - * It scans all registers image type supports - * checks the input type_id for each supported image type - * - * if successful, - * returns respective image_type_params pointer if success - * if input type_id is not supported by any of image_type_support - * returns NULL - */ -struct image_type_params *mkimage_get_type(int type) -{ - struct image_type_params *curr; - - for (curr = mkimage_tparams; curr != NULL; curr = curr->next) { - if (curr->check_image_type) { - if (!curr->check_image_type (type)) - return curr; - } - } - return NULL; -} - -/* - * mkimage_verify_print_header - - * - * It scans mkimage_tparams link list, - * verifies image_header for each supported image type - * if verification is successful, prints respective header - * - * returns negative if input image format does not match with any of - * supported image types - */ -int mkimage_verify_print_header (void *ptr, struct stat *sbuf) -{ - int retval = -1; - struct image_type_params *curr; - - for (curr = mkimage_tparams; curr != NULL; curr = curr->next ) { - if (curr->verify_header) { - retval = curr->verify_header ( - (unsigned char *)ptr, sbuf->st_size, - ¶ms); - - if (retval == 0) { - /* - * Print the image information - * if verify is successful - */ - if (curr->print_header) - curr->print_header (ptr); - else { - fprintf (stderr, - "%s: print_header undefined for %s\n", - params.cmdname, curr->name); - } - break; - } - } - } - return retval; -} - int main (int argc, char **argv) { @@ -139,9 +36,6 @@ main (int argc, char **argv) struct image_type_params *tparams = NULL; int pad_len = 0; - /* Init all image generation/list support */ - register_image_tool(mkimage_register); - params.cmdname = *argv; params.addr = params.ep = 0; @@ -279,7 +173,7 @@ NXTARG: ; usage (); /* set tparams as per input type_id */ - tparams = mkimage_get_type(params.type); + tparams = imagetool_get_type(params.type); if (tparams == NULL) { fprintf (stderr, "%s: unsupported type %s\n", params.cmdname, genimg_get_type_name(params.type)); @@ -363,7 +257,8 @@ NXTARG: ; * Print the image information for matched image type * Returns the error code if not matched */ - retval = mkimage_verify_print_header (ptr, &sbuf); + retval = imagetool_verify_print_header(ptr, &sbuf, + tparams, ¶ms); (void) munmap((void *)ptr, sbuf.st_size); (void) close (ifd); @@ -529,7 +424,7 @@ copy_file (int ifd, const char *datafile, int pad) uint8_t zeros[4096]; int offset = 0; int size; - struct image_type_params *tparams = mkimage_get_type (params.type); + struct image_type_params *tparams = imagetool_get_type(params.type); if (pad >= sizeof(zeros)) { fprintf(stderr, "%s: Can't pad to %d\n", diff --git a/tools/mxsimage.c b/tools/mxsimage.c index 04beefe05c..98fc64491c 100644 --- a/tools/mxsimage.c +++ b/tools/mxsimage.c @@ -2312,25 +2312,18 @@ fail: /* * mxsimage parameters */ -static struct image_type_params mxsimage_params = { - .name = "Freescale MXS Boot Image support", - .header_size = 0, - .hdr = NULL, - .check_image_type = mxsimage_check_image_types, - .verify_header = mxsimage_verify_header, - .print_header = mxsimage_print_header, - .set_header = mxsimage_set_header, - .check_params = mxsimage_check_params, - .vrec_header = mxsimage_generate, -}; - -void init_mxs_image_type(void) -{ - register_image_type(&mxsimage_params); -} - -#else -void init_mxs_image_type(void) -{ -} +U_BOOT_IMAGE_TYPE( + mxsimage, + "Freescale MXS Boot Image support", + 0, + NULL, + mxsimage_check_params, + mxsimage_verify_header, + mxsimage_print_header, + mxsimage_set_header, + NULL, + mxsimage_check_image_types, + NULL, + mxsimage_generate +); #endif diff --git a/tools/omapimage.c b/tools/omapimage.c index 1e0c164796..7198b3330d 100644 --- a/tools/omapimage.c +++ b/tools/omapimage.c @@ -162,18 +162,17 @@ static void omapimage_set_header(void *ptr, struct stat *sbuf, int ifd, /* * omapimage parameters */ -static struct image_type_params omapimage_params = { - .name = "TI OMAP CH/GP Boot Image support", - .header_size = OMAP_FILE_HDR_SIZE, - .hdr = (void *)&omapimage_header, - .check_image_type = omapimage_check_image_types, - .verify_header = omapimage_verify_header, - .print_header = omapimage_print_header, - .set_header = omapimage_set_header, - .check_params = gpimage_check_params, -}; - -void init_omap_image_type(void) -{ - register_image_type(&omapimage_params); -} +U_BOOT_IMAGE_TYPE( + omapimage, + "TI OMAP CH/GP Boot Image support", + OMAP_FILE_HDR_SIZE, + (void *)&omapimage_header, + gpimage_check_params, + omapimage_verify_header, + omapimage_print_header, + omapimage_set_header, + NULL, + omapimage_check_image_types, + NULL, + NULL +); diff --git a/tools/pblimage.c b/tools/pblimage.c index 2a799ab4b6..d74fde9a44 100644 --- a/tools/pblimage.c +++ b/tools/pblimage.c @@ -308,19 +308,17 @@ int pblimage_check_params(struct image_tool_params *params) }; /* pblimage parameters */ -static struct image_type_params pblimage_params = { - .name = "Freescale PBL Boot Image support", - .header_size = sizeof(struct pbl_header), - .hdr = (void *)&pblimage_header, - .check_image_type = pblimage_check_image_types, - .check_params = pblimage_check_params, - .verify_header = pblimage_verify_header, - .print_header = pblimage_print_header, - .set_header = pblimage_set_header, -}; - -void init_pbl_image_type(void) -{ - pbl_size = 0; - register_image_type(&pblimage_params); -} +U_BOOT_IMAGE_TYPE( + pblimage, + "Freescale PBL Boot Image support", + sizeof(struct pbl_header), + (void *)&pblimage_header, + pblimage_check_params, + pblimage_verify_header, + pblimage_print_header, + pblimage_set_header, + NULL, + pblimage_check_image_types, + NULL, + NULL +); diff --git a/tools/socfpgaimage.c b/tools/socfpgaimage.c index 917873e7b3..8fe91fe80e 100644 --- a/tools/socfpgaimage.c +++ b/tools/socfpgaimage.c @@ -33,6 +33,8 @@ #include "pbl_crc32.h" #include "imagetool.h" +#include "mkimage.h" + #include <image.h> #define HEADER_OFFSET 0x40 @@ -133,12 +135,12 @@ static int verify_buffer(const uint8_t *buf) len = verify_header(buf + HEADER_OFFSET); if (len < 0) { - fprintf(stderr, "Invalid header\n"); + debug("Invalid header\n"); return -1; } if (len < HEADER_OFFSET || len > PADDED_SIZE) { - fprintf(stderr, "Invalid header length (%i)\n", len); + debug("Invalid header length (%i)\n", len); return -1; } @@ -241,19 +243,17 @@ static void socfpgaimage_set_header(void *ptr, struct stat *sbuf, int ifd, sign_buffer(buf, 0, 0, data_size, 0); } -static struct image_type_params socfpgaimage_params = { - .name = "Altera SOCFPGA preloader support", - .vrec_header = socfpgaimage_vrec_header, - .header_size = 0, /* This will be modified by vrec_header() */ - .hdr = (void *)buffer, - .check_image_type = socfpgaimage_check_image_types, - .verify_header = socfpgaimage_verify_header, - .print_header = socfpgaimage_print_header, - .set_header = socfpgaimage_set_header, - .check_params = socfpgaimage_check_params, -}; - -void init_socfpga_image_type(void) -{ - register_image_type(&socfpgaimage_params); -} +U_BOOT_IMAGE_TYPE( + socfpgaimage, + "Altera SOCFPGA preloader support", + 0, /* This will be modified by vrec_header() */ + (void *)buffer, + socfpgaimage_check_params, + socfpgaimage_verify_header, + socfpgaimage_print_header, + socfpgaimage_set_header, + NULL, + socfpgaimage_check_image_types, + NULL, + socfpgaimage_vrec_header +); diff --git a/tools/ublimage.c b/tools/ublimage.c index cbbbe205da..6ed1eef29c 100644 --- a/tools/ublimage.c +++ b/tools/ublimage.c @@ -244,18 +244,17 @@ int ublimage_check_params(struct image_tool_params *params) /* * ublimage parameters */ -static struct image_type_params ublimage_params = { - .name = "Davinci UBL boot support", - .header_size = sizeof(struct ubl_header), - .hdr = (void *)&ublimage_header, - .check_image_type = ublimage_check_image_types, - .verify_header = ublimage_verify_header, - .print_header = ublimage_print_header, - .set_header = ublimage_set_header, - .check_params = ublimage_check_params, -}; - -void init_ubl_image_type(void) -{ - register_image_type(&ublimage_params); -} +U_BOOT_IMAGE_TYPE( + ublimage, + "Davinci UBL boot support", + sizeof(struct ubl_header), + (void *)&ublimage_header, + ublimage_check_params, + ublimage_verify_header, + ublimage_print_header, + ublimage_set_header, + NULL, + ublimage_check_image_types, + NULL, + NULL +); |
