diff options
| -rw-r--r-- | arch/arm/cpu/armv7/ls102xa/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/ls102xa/spl.c | 33 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-ls102xa/spl.h | 20 | ||||
| -rw-r--r-- | board/freescale/ls1021aqds/MAINTAINERS | 1 | ||||
| -rw-r--r-- | board/freescale/ls1021aqds/ddr.c | 5 | ||||
| -rw-r--r-- | board/freescale/ls1021aqds/ls1021aqds.c | 39 | ||||
| -rw-r--r-- | board/freescale/ls1021aqds/ls102xa_pbi.cfg | 12 | ||||
| -rw-r--r-- | board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg | 14 | ||||
| -rw-r--r-- | configs/ls1021aqds_sdcard_defconfig | 4 | ||||
| -rw-r--r-- | include/configs/ls1021aqds.h | 45 |
10 files changed, 173 insertions, 1 deletions
diff --git a/arch/arm/cpu/armv7/ls102xa/Makefile b/arch/arm/cpu/armv7/ls102xa/Makefile index ae4f25dcd3..2e6a20757f 100644 --- a/arch/arm/cpu/armv7/ls102xa/Makefile +++ b/arch/arm/cpu/armv7/ls102xa/Makefile @@ -11,3 +11,4 @@ obj-y += fsl_epu.o obj-$(CONFIG_OF_LIBFDT) += fdt.o obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o +obj-$(CONFIG_SPL) += spl.o diff --git a/arch/arm/cpu/armv7/ls102xa/spl.c b/arch/arm/cpu/armv7/ls102xa/spl.c new file mode 100644 index 0000000000..1dfbf54802 --- /dev/null +++ b/arch/arm/cpu/armv7/ls102xa/spl.c @@ -0,0 +1,33 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> + +u32 spl_boot_device(void) +{ +#ifdef CONFIG_SPL_MMC_SUPPORT + return BOOT_DEVICE_MMC1; +#endif + return BOOT_DEVICE_NAND; +} + +u32 spl_boot_mode(void) +{ + switch (spl_boot_device()) { + case BOOT_DEVICE_MMC1: +#ifdef CONFIG_SPL_FAT_SUPPORT + return MMCSD_MODE_FAT; +#else + return MMCSD_MODE_RAW; +#endif + case BOOT_DEVICE_NAND: + return 0; + default: + puts("spl: error: unsupported device\n"); + hang(); + } +} diff --git a/arch/arm/include/asm/arch-ls102xa/spl.h b/arch/arm/include/asm/arch-ls102xa/spl.h new file mode 100644 index 0000000000..26e4ea134b --- /dev/null +++ b/arch/arm/include/asm/arch-ls102xa/spl.h @@ -0,0 +1,20 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARCH_SPL_H__ +#define __ASM_ARCH_SPL_H__ + +#define BOOT_DEVICE_NONE 0 +#define BOOT_DEVICE_XIP 1 +#define BOOT_DEVICE_XIPWAIT 2 +#define BOOT_DEVICE_NAND 3 +#define BOOT_DEVICE_ONENAND 4 +#define BOOT_DEVICE_MMC1 5 +#define BOOT_DEVICE_MMC2 6 +#define BOOT_DEVICE_MMC2_2 7 +#define BOOT_DEVICE_SPI 10 + +#endif /* __ASM_ARCH_SPL_H__ */ diff --git a/board/freescale/ls1021aqds/MAINTAINERS b/board/freescale/ls1021aqds/MAINTAINERS index e30e94471b..962176b533 100644 --- a/board/freescale/ls1021aqds/MAINTAINERS +++ b/board/freescale/ls1021aqds/MAINTAINERS @@ -6,3 +6,4 @@ F: include/configs/ls1021aqds.h F: configs/ls1021aqds_nor_defconfig F: configs/ls1021aqds_ddr4_nor_defconfig F: configs/ls1021aqds_nor_SECURE_BOOT_defconfig +F: configs/ls1021aqds_sdcard_defconfig diff --git a/board/freescale/ls1021aqds/ddr.c b/board/freescale/ls1021aqds/ddr.c index 5898e33744..a539ff9791 100644 --- a/board/freescale/ls1021aqds/ddr.c +++ b/board/freescale/ls1021aqds/ddr.c @@ -153,9 +153,12 @@ phys_size_t initdram(int board_type) { phys_size_t dram_size; +#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL) puts("Initializing DDR....using SPD\n"); dram_size = fsl_ddr_sdram(); - +#else + dram_size = fsl_ddr_sdram_size(); +#endif return dram_size; } diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index bf22fced9c..9eab42d6c7 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -15,6 +15,7 @@ #include <fsl_esdhc.h> #include <fsl_ifc.h> #include <fsl_sec.h> +#include <spl.h> #include "../common/qixis.h" #include "ls1021aqds_qixis.h" @@ -34,10 +35,17 @@ enum { int checkboard(void) { char buf[64]; +#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT) u8 sw; +#endif puts("Board: LS1021AQDS\n"); +#ifdef CONFIG_SD_BOOT + puts("SD\n"); +#elif CONFIG_QSPI_BOOT + puts("QSPI\n"); +#else sw = QIXIS_READ(brdcfg[0]); sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; @@ -51,6 +59,7 @@ int checkboard(void) printf("IFCCard\n"); else printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); +#endif printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n", QIXIS_READ(id), QIXIS_READ(arch)); @@ -165,6 +174,36 @@ int board_early_init_f(void) return 0; } +#ifdef CONFIG_SPL_BUILD +void board_init_f(ulong dummy) +{ + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; + + /* Set global data pointer */ + gd = &gdata; + + /* Clear the BSS */ + memset(__bss_start, 0, __bss_end - __bss_start); + +#ifdef CONFIG_FSL_IFC + init_early_memctl_regs(); +#endif + + get_clocks(); + + preloader_console_init(); + +#ifdef CONFIG_SPL_I2C_SUPPORT + i2c_init_all(); +#endif + out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER); + + dram_init(); + + board_init_r(NULL, 0); +} +#endif + int config_board_mux(int ctrl_type) { u8 reg12; diff --git a/board/freescale/ls1021aqds/ls102xa_pbi.cfg b/board/freescale/ls1021aqds/ls102xa_pbi.cfg new file mode 100644 index 0000000000..f1a1b63ab7 --- /dev/null +++ b/board/freescale/ls1021aqds/ls102xa_pbi.cfg @@ -0,0 +1,12 @@ +#PBI commands + +09570200 ffffffff +09570158 00000300 +8940007c 21f47300 + +#Configure Scratch register +09ee0200 10000000 +#Configure alternate space +09570158 00001000 +#Flush PBL data +096100c0 000FFFFF diff --git a/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg b/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg new file mode 100644 index 0000000000..9d99bd862d --- /dev/null +++ b/board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg @@ -0,0 +1,14 @@ +#PBL preamble and RCW header +aa55aa55 01ee0100 + +#enable IFC, disable QSPI and DSPI +0608000a 00000000 00000000 00000000 +60000000 00407900 60040a00 21046000 +00000000 00000000 00000000 00038000 +00000000 001b7200 00000000 00000000 + +#disable IFC, enable QSPI and DSPI +#0608000a 00000000 00000000 00000000 +#60000000 00407900 60040a00 21046000 +#00000000 00000000 00000000 00038000 +#20024800 001b7200 00000000 00000000 diff --git a/configs/ls1021aqds_sdcard_defconfig b/configs/ls1021aqds_sdcard_defconfig new file mode 100644 index 0000000000..e03c3b467d --- /dev/null +++ b/configs/ls1021aqds_sdcard_defconfig @@ -0,0 +1,4 @@ +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT" ++S:CONFIG_ARM=y ++S:CONFIG_TARGET_LS1021AQDS=y diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index a8383f1888..4a2e6098b9 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -40,6 +40,39 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021aqds/ls102xa_pbi.cfg +#endif + +#ifdef CONFIG_SD_BOOT +#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_WATCHDOG_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 + +#define CONFIG_SPL_TEXT_BASE 0x10000000 +#define CONFIG_SPL_MAX_SIZE 0x1a000 +#define CONFIG_SPL_STACK 0x1001d000 +#define CONFIG_SPL_PAD_TO 0x1c000 +#define CONFIG_SYS_TEXT_BASE 0x82000000 + +#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 +#define CONFIG_SPL_BSS_START_ADDR 0x80100000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_MONITOR_LEN 0x80000 +#endif + #ifndef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0x67f80000 #endif @@ -356,6 +389,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMDLINE_TAG #define CONFIG_CMDLINE_EDITING + #define CONFIG_CMD_IMLS #define CONFIG_HWCONFIG @@ -404,17 +438,28 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#endif /* * Environment */ #define CONFIG_ENV_OVERWRITE +#if defined(CONFIG_SD_BOOT) +#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif #define CONFIG_OF_LIBFDT #define CONFIG_OF_BOARD_SETUP |
