summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Makefile9
-rw-r--r--board/freescale/m54451evb/u-boot.spa9
-rw-r--r--cpu/mcf5445x/dspi.c10
-rw-r--r--cpu/mcf5445x/start.S81
-rw-r--r--include/configs/M54451EVB.h39
5 files changed, 82 insertions, 66 deletions
diff --git a/Makefile b/Makefile
index 090e64522b..03148445cc 100644
--- a/Makefile
+++ b/Makefile
@@ -2108,18 +2108,15 @@ M5373EVB_config : unconfig
@$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
M54451EVB_config \
-M54451EVB_spansion_config \
M54451EVB_stmicro_config : unconfig
@case "$@" in \
- M54451EVB_config) FLASH=SPANSION;; \
- M54451EVB_spansion_config) FLASH=SPANSION;; \
+ M54451EVB_config) FLASH=NOR;; \
M54451EVB_stmicro_config) FLASH=STMICRO;; \
esac; \
- if [ "$${FLASH}" = "SPANSION" ] ; then \
- echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
+ if [ "$${FLASH}" = "NOR" ] ; then \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
- $(XECHO) "... with SPANSION boot..." ; \
+ $(XECHO) "... with NOR boot..." ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
diff --git a/board/freescale/m54451evb/u-boot.spa b/board/freescale/m54451evb/u-boot.spa
index 08e184c1e6..d8caefad64 100644
--- a/board/freescale/m54451evb/u-boot.spa
+++ b/board/freescale/m54451evb/u-boot.spa
@@ -56,10 +56,13 @@ SECTIONS
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/mcf5445x/start.o (.text)
- lib_m68k/traps.o (.text)
- lib_m68k/interrupts.o (.text)
+ cpu/mcf5445x/libmcf5445x.a (.text)
+ lib_m68k/libm68k.a (.text)
+ common/cmd_flash.o (.text)
common/dlmalloc.o (.text)
- lib_generic/zlib.o (.text)
+ common/main.o (.text)
+ common/image.o (.text)
+ lib_generic/libgeneric.a (.text)
. = DEFINED(env_offset) ? env_offset : .;
common/env_embedded.o (.text)
diff --git a/cpu/mcf5445x/dspi.c b/cpu/mcf5445x/dspi.c
index 6d3ebab6ef..59133e84d8 100644
--- a/cpu/mcf5445x/dspi.c
+++ b/cpu/mcf5445x/dspi.c
@@ -159,12 +159,10 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
dspi_rx();
return 0;
case 0x05: /* Read Status */
- if (len == 4)
- if ((spi_wr[1] == 0xFF) && (spi_wr[2] == 0xFF)
- && (spi_wr[3] == 0xFF)) {
- dspi_tx(slave->cs, 0x80, *spi_wr);
- dspi_rx();
- }
+ if (len == 1) {
+ dspi_tx(slave->cs, 0x80, *spi_wr);
+ dspi_rx();
+ }
return 0;
case 0x06: /* WREN */
dspi_tx(slave->cs, 0x00, *spi_wr);
diff --git a/cpu/mcf5445x/start.S b/cpu/mcf5445x/start.S
index 26fb2ce0cb..c156bab037 100644
--- a/cpu/mcf5445x/start.S
+++ b/cpu/mcf5445x/start.S
@@ -149,9 +149,35 @@ asm_sbf_img_hdr:
.long 0x00030000 /* image length */
.long TEXT_BASE /* image to be relocated at */
+
+
asm_dram_init:
+ move.w #0x2700,%sr /* Mask off Interrupt */
+
+ move.l #CONFIG_SYS_INIT_RAM_ADDR, %d0
+ movec %d0, %VBR
+
move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
- movec %d0, %RAMBAR1 /* init Rambar */
+ movec %d0, %RAMBAR1
+
+ /* initialize general use internal ram */
+ move.l #0, %d0
+ move.l #(CACR_STATUS), %a1 /* CACR */
+ move.l #(ICACHE_STATUS), %a2 /* icache */
+ move.l #(DCACHE_STATUS), %a3 /* dcache */
+ move.l %d0, (%a1)
+ move.l %d0, (%a2)
+ move.l %d0, (%a3)
+
+ /* invalidate and disable cache */
+ move.l #0x01004100, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ move.l #0, %d0
+ movec %d0, %ACR0
+ movec %d0, %ACR1
+ movec %d0, %ACR2
+ movec %d0, %ACR3
+
move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
clr.l %sp@-
@@ -163,10 +189,7 @@ asm_dram_init:
move.l #0xFC008004, %a1
move.l #(CONFIG_SYS_CS0_MASK), (%a1)
- /*
- * Dram Initialization
- * a1, a2, and d0
- */
+ /* Dram Initialization a1, a2, and d0 */
/* mscr sdram */
move.l #0xFC0A4074, %a1
move.b #(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
@@ -209,24 +232,21 @@ dramsz_loop:
move.l #0xFC0B8000, %a1 /* Mode */
move.l #0xFC0B8004, %a2 /* Ctrl */
-#ifdef CONFIG_M54455EVB
/* Issue PALL */
move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
nop
+#ifdef CONFIG_M54455EVB
/* Issue LEMR */
move.l #(CONFIG_SYS_SDRAM_EMOD + 0x408), (%a1)
nop
move.l #(CONFIG_SYS_SDRAM_MODE + 0x300), (%a1)
nop
-
- move.l #1000, %d0
-wait1000:
- nop
- subq.l #1, %d0
- bne wait1000
#endif
+ move.l #1000, %d1
+ jsr asm_delay
+
/* Issue PALL */
move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
nop
@@ -246,25 +266,24 @@ wait1000:
move.l #(CONFIG_SYS_SDRAM_MODE), (%a1)
nop
move.l #(CONFIG_SYS_SDRAM_EMOD), (%a1)
- nop
#endif
- move.l #500, %d0
-wait500:
- nop
- subq.l #1, %d0
- bne wait500
+ move.l #500, %d1
+ jsr asm_delay
- move.l #(CONFIG_SYS_SDRAM_CTRL), %d0
- and.l #0x7FFFFFFF, %d0
+ move.l #(CONFIG_SYS_SDRAM_CTRL), %d1
+ and.l #0x7FFFFFFF, %d1
#ifdef CONFIG_M54455EVB
- or.l #0x10000c00, %d0
+ or.l #0x10000C00, %d1
#elif defined(CONFIG_M54451EVB)
- or.l #0x10000000, %d0
+ or.l #0x10000C00, %d1
#endif
- move.l %d0, (%a2)
+ move.l %d1, (%a2)
nop
+ move.l #2000, %d1
+ jsr asm_delay
+
/*
* DSPI Initialization
* a0 - general, sram - 0x80008000 - 32, see M54455EVB.h
@@ -274,6 +293,7 @@ wait500:
* a4 - Dst addr
*/
/* Enable pins for DSPI mode - chip-selects are enabled later */
+asm_dspi_init:
move.l #0xFC0A4063, %a0
move.b #0x7F, (%a0)
@@ -367,27 +387,29 @@ asm_dspi_rd_status:
move.b (%a3), %d1
rts
+
+asm_delay:
+ nop
+ subq.l #1, %d1
+ bne asm_delay
+ rts
#endif /* CONFIG_CF_SBF */
.text
. = 0x400
.globl _start
_start:
+#if !defined(CONFIG_CF_SBF)
nop
nop
move.w #0x2700,%sr /* Mask off Interrupt */
/* Set vector base register at the beginning of the Flash */
-#if defined(CONFIG_CF_SBF)
- move.l #TEXT_BASE, %d0
- movec %d0, %VBR
-#else
move.l #CONFIG_SYS_FLASH_BASE, %d0
movec %d0, %VBR
move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
movec %d0, %RAMBAR1
-#endif
/* initialize general use internal ram */
move.l #0, %d0
@@ -411,6 +433,7 @@ _start:
the first c-code */
move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
clr.l %sp@-
+#endif
move.l #__got_start, %a5 /* put relocation table address to a5 */
@@ -532,7 +555,7 @@ icache_enable:
move.l #0x00040100, %d0 /* Invalidate icache */
movec %d0, %CACR
- move.l #(CONFIG_SYS_SDRAM_BASE + 0x1c000), %d0 /* Setup icache */
+ move.l #(CONFIG_SYS_SDRAM_BASE + 0xC000), %d0 /* Setup icache */
movec %d0, %ACR2
move.l #0x04088020, %d0 /* Enable bcache and icache */
diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h
index 45f701652f..cc57da816b 100644
--- a/include/configs/M54451EVB.h
+++ b/include/configs/M54451EVB.h
@@ -70,6 +70,7 @@
#define CONFIG_CMD_MISC
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SPI
@@ -163,7 +164,7 @@
#define CONFIG_SYS_I2C_SPEED 80000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_OFFSET 0x58000
-#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
+#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
/* DSPI and Serial Flash */
#define CONFIG_CF_DSPI
@@ -175,7 +176,7 @@
# define CONFIG_SPI_FLASH
# define CONFIG_SPI_FLASH_STMICRO
-# define CONFIG_SYS_DSPI_DCTAR0 (DSPI_DCTAR_TRSZ(7) | \
+# define CONFIG_SYS_DSPI_DCTAR0 (DSPI_DCTAR_TRSZ(7) | \
DSPI_DCTAR_CPOL | \
DSPI_DCTAR_CPHA | \
DSPI_DCTAR_PCSSCK_1CLK | \
@@ -191,7 +192,7 @@
/* Input, PCI, Flexbus, and VCO */
#define CONFIG_EXTRA_CLOCK
-#define CONFIG_PRAM 2048 /* 2048 KB */
+#define CONFIG_PRAM 2048 /* 2048 KB */
#define CONFIG_SYS_PROMPT "-> "
#define CONFIG_SYS_LONGHELP /* undef to save memory */
@@ -209,7 +210,7 @@
#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_MBAR 0xFC000000
+#define CONFIG_SYS_MBAR 0xFC000000
/*
* Low Level Configuration Settings
@@ -265,7 +266,7 @@
/* Configuration for environment
* Environment is embedded in u-boot in the second sector of the flash
*/
-#if defined(CONFIG_CF_SBF)
+#if defined(CONFIG_SYS_STMICRO_BOOT)
# define CONFIG_ENV_IS_IN_SPI_FLASH 1
# define CONFIG_ENV_SPI_CS 1
# define CONFIG_ENV_OFFSET 0x20000
@@ -273,8 +274,9 @@
# define CONFIG_ENV_SECT_SIZE 0x10000
#else
# define CONFIG_ENV_IS_IN_FLASH 1
-# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000)
-# define CONFIG_ENV_SECT_SIZE 0x2000
+# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x8000)
+# define CONFIG_ENV_SIZE 0x2000
+# define CONFIG_ENV_SECT_SIZE 0x8000
#endif
#undef CONFIG_ENV_OVERWRITE
#undef CONFIG_ENV_IS_EMBEDDED
@@ -286,8 +288,7 @@
# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_SER_FLASH_BASE
# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_SER_FLASH_BASE
# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS0_BASE
-#endif
-#ifdef CONFIG_SYS_SPANSION_BOOT
+#else
# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE
# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_SER_FLASH_BASE
@@ -297,6 +298,7 @@
#ifdef CONFIG_SYS_FLASH_CFI
# define CONFIG_FLASH_CFI_DRIVER 1
+# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */
# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
# define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
@@ -311,27 +313,20 @@
* This is setting for JFFS2 support in u-boot.
* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
*/
-#ifdef CONFIG_SYS_SPANSION_BOOT
-# define CONFIG_JFFS2_DEV "nor0"
-# define CONFIG_JFFS2_PART_SIZE 0x01000000
-# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000)
-#endif
-#ifdef CONFIG_SYS_STMICRO_BOOT
+#ifdef CONFIG_CMD_JFFS2
# define CONFIG_JFFS2_DEV "nor0"
# define CONFIG_JFFS2_PART_SIZE 0x01000000
# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000)
#endif
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
+/* Cache Configuration */
#define CONFIG_SYS_CACHELINE_SIZE 16
/*-----------------------------------------------------------------------
* Memory bank definitions
*/
/*
- * CS0 - NOR Flash 8MB
+ * CS0 - NOR Flash 16MB
* CS1 - Available
* CS2 - Available
* CS3 - Available
@@ -339,10 +334,10 @@
* CS5 - Available
*/
- /* SPANSION Flash */
+ /* Flash */
#define CONFIG_SYS_CS0_BASE 0x00000000
-#define CONFIG_SYS_CS0_MASK 0x007F0001
-#define CONFIG_SYS_CS0_CTRL 0x00001180
+#define CONFIG_SYS_CS0_MASK 0x00FF0001
+#define CONFIG_SYS_CS0_CTRL 0x00004D80
#define CONFIG_SYS_SPANSION_BASE CONFIG_SYS_CS0_BASE
OpenPOWER on IntegriCloud