summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--board/AndesTech/adp-ag101/README (renamed from doc/README.ag101)0
-rw-r--r--board/Marvell/db64360/README (renamed from doc/README.db64360)0
-rw-r--r--board/Marvell/db64460/README (renamed from doc/README.db64460)0
-rw-r--r--board/RPXClassic/README (renamed from doc/README.RPXClassic)0
-rw-r--r--board/RPXlite/README (renamed from doc/README.RPXlite)0
-rw-r--r--board/RPXlite/README.PlanetCore (renamed from doc/README.PlanetCore)0
-rw-r--r--board/alaska/README (renamed from doc/README.alaska8220)0
-rw-r--r--board/amcc/bamboo/README (renamed from doc/README.bamboo)0
-rw-r--r--board/amcc/ebony/README (renamed from doc/README.ebony)0
-rw-r--r--board/amcc/ocotea/README.ocotea (renamed from doc/README.ocotea)0
-rw-r--r--board/amcc/ocotea/README.ocotea-PIBS-to-U-Boot (renamed from doc/README.ocotea-PIBS-to-U-Boot)0
-rw-r--r--board/armltd/integrator/README (renamed from doc/README-integrator)0
-rw-r--r--board/cmi/README (renamed from doc/README.cmi)0
-rw-r--r--board/cobra5272/README (renamed from doc/README.COBRA5272)0
-rw-r--r--board/davinci/da8xxevm/README.hawkboard (renamed from doc/README.hawkboard)0
-rw-r--r--board/dnp5370/README (renamed from doc/README.dnp5370)0
-rw-r--r--board/evb64260/README (renamed from doc/README.evb64260)0
-rw-r--r--board/evb64260/README.EVB-64260-750CX (renamed from doc/README.EVB-64260-750CX)0
-rw-r--r--board/fads/README (renamed from doc/README.fads)0
-rw-r--r--board/freescale/m52277evb/README (renamed from doc/README.m52277evb)0
-rw-r--r--board/freescale/m5253evbe/README (renamed from doc/README.m5253evbe)0
-rw-r--r--board/freescale/m53017evb/README (renamed from doc/README.m53017evb)0
-rw-r--r--board/freescale/m5373evb/README (renamed from doc/README.m5373evb)0
-rw-r--r--board/freescale/m54455evb/README (renamed from doc/README.m54455evb)0
-rw-r--r--board/freescale/m547xevb/README (renamed from doc/README.m5475evb)0
-rw-r--r--board/freescale/mpc7448hpc2/README (renamed from doc/README.mpc7448hpc2)0
-rw-r--r--board/freescale/mpc8313erdb/README (renamed from doc/README.mpc8313erdb)0
-rw-r--r--board/freescale/mpc8315erdb/README (renamed from doc/README.mpc8315erdb)0
-rw-r--r--board/freescale/mpc8323erdb/README (renamed from doc/README.mpc8323erdb)0
-rw-r--r--board/freescale/mpc832xemds/README (renamed from doc/README.mpc832xemds)0
-rw-r--r--board/freescale/mpc8349itx/README (renamed from doc/README.mpc8349itx)0
-rw-r--r--board/freescale/mpc8360emds/README (renamed from doc/README.mpc8360emds)0
-rw-r--r--board/freescale/mpc837xemds/README (renamed from doc/README.mpc837xemds)0
-rw-r--r--board/freescale/mpc837xerdb/README (renamed from doc/README.mpc837xerdb)0
-rw-r--r--board/freescale/mpc8536ds/README (renamed from doc/README.mpc8536ds)0
-rw-r--r--board/freescale/mpc8544ds/README (renamed from doc/README.mpc8544ds)0
-rw-r--r--board/freescale/mpc8569mds/README (renamed from doc/README.mpc8569mds)0
-rw-r--r--board/freescale/mpc8572ds/README (renamed from doc/README.mpc8572ds)0
-rw-r--r--board/freescale/mpc8610hpcd/README (renamed from doc/README.mpc8610hpcd)0
-rw-r--r--board/freescale/mpc8641hpcn/README (renamed from doc/README.mpc8641hpcn)0
-rw-r--r--board/freescale/mx35pdk/README (renamed from doc/README.mx35pdk)0
-rw-r--r--board/freescale/mx6qsabrelite/README (renamed from doc/README.mx6qsabrelite)0
-rw-r--r--board/freescale/p1022ds/README (renamed from doc/README.p1022ds)0
-rw-r--r--board/freescale/p1023rds/README (renamed from doc/README.p1023rds)0
-rw-r--r--board/freescale/p1_p2_rdb/README (renamed from doc/README.p2020rdb)0
-rw-r--r--board/freescale/p1_p2_rdb_pc/README (renamed from doc/README.p1_p2_rdb_pc)0
-rw-r--r--board/freescale/p2041rdb/README (renamed from doc/README.p2041rdb)0
-rw-r--r--board/freescale/p3060qds/README (renamed from doc/README.p3060qds)0
-rw-r--r--board/icecube/README (renamed from doc/README.IceCube)0
-rw-r--r--board/icecube/README.Lite5200B_low_power (renamed from doc/README.Lite5200B_low_power)0
-rw-r--r--board/incaip/README (renamed from doc/README.INCA-IP)0
-rw-r--r--board/iphase4539/README (renamed from doc/README.IPHASE4539)0
-rw-r--r--board/keymile/km83xx/README.kmeter1 (renamed from doc/README.kmeter1)0
-rw-r--r--board/korat/README (renamed from doc/README.korat)0
-rw-r--r--board/matrix_vision/mergerbox/README (renamed from doc/README.mergerbox)0
-rw-r--r--board/matrix_vision/mvbc_p/README.mvbc_p (renamed from doc/README.mvbc_p)0
-rw-r--r--board/matrix_vision/mvblm7/README.mvblm7 (renamed from doc/README.mvblm7)0
-rw-r--r--board/matrix_vision/mvsmr/README.mvsmr (renamed from doc/README.mvsmr)0
-rw-r--r--board/mbx8xx/README (renamed from doc/README.MBX)0
-rw-r--r--board/mpl/pip405/README (renamed from doc/README.PIP405)0
-rw-r--r--board/phytec/pcm030/README (renamed from doc/README.phytec.pcm030)0
-rw-r--r--board/qemu-mips/README167
-rw-r--r--board/renesas/sh7757lcr/README.sh7757lcr (renamed from doc/README.sh7757lcr)0
-rw-r--r--board/renesas/sh7785lcr/README.sh7785lcr (renamed from doc/README.sh7785lcr)0
-rw-r--r--board/sandbox/sandbox/README.sandbox (renamed from doc/README.sandbox)0
-rw-r--r--board/sandpoint/README398
-rw-r--r--board/sbc8349/README (renamed from doc/README.sbc8349)0
-rw-r--r--board/sbc8548/README (renamed from doc/README.sbc8548)0
-rw-r--r--board/sbc8560/README (renamed from doc/README.SBC8560)0
-rw-r--r--board/sbc8641d/README (renamed from doc/README.sbc8641d)0
-rw-r--r--board/sheldon/simpc8313/README.simpc8313 (renamed from doc/README.simpc8313)0
-rw-r--r--board/st/nhk8815/README.nhk8815 (renamed from doc/README.nhk8815)0
-rw-r--r--board/stx/stxxtc/README.stxxtc (renamed from doc/README.stxxtc)0
-rw-r--r--board/ti/omap730p2/README.omap730p2 (renamed from doc/README.omap730p2)0
-rw-r--r--board/timll/devkit8000/README (renamed from doc/README.timll)0
-rw-r--r--board/tqc/tqm8260/README (renamed from doc/README.TQM8260)0
-rw-r--r--board/xes/xpedite1000/README (renamed from doc/README.xpedite1k)0
-rw-r--r--board/zeus/README (renamed from doc/README.zeus)0
-rw-r--r--doc/README.OXC24
-rw-r--r--doc/README.Sandpoint8240394
-rw-r--r--doc/README.amigaone12
-rw-r--r--doc/README.p4080ds32
-rw-r--r--doc/README.qemu_mips164
83 files changed, 565 insertions, 626 deletions
diff --git a/doc/README.ag101 b/board/AndesTech/adp-ag101/README
index 46fc637742..46fc637742 100644
--- a/doc/README.ag101
+++ b/board/AndesTech/adp-ag101/README
diff --git a/doc/README.db64360 b/board/Marvell/db64360/README
index ebac4cec19..ebac4cec19 100644
--- a/doc/README.db64360
+++ b/board/Marvell/db64360/README
diff --git a/doc/README.db64460 b/board/Marvell/db64460/README
index c6e01fe1ef..c6e01fe1ef 100644
--- a/doc/README.db64460
+++ b/board/Marvell/db64460/README
diff --git a/doc/README.RPXClassic b/board/RPXClassic/README
index e03f670d1c..e03f670d1c 100644
--- a/doc/README.RPXClassic
+++ b/board/RPXClassic/README
diff --git a/doc/README.RPXlite b/board/RPXlite/README
index 3ca671126d..3ca671126d 100644
--- a/doc/README.RPXlite
+++ b/board/RPXlite/README
diff --git a/doc/README.PlanetCore b/board/RPXlite/README.PlanetCore
index b73c5f5a87..b73c5f5a87 100644
--- a/doc/README.PlanetCore
+++ b/board/RPXlite/README.PlanetCore
diff --git a/doc/README.alaska8220 b/board/alaska/README
index 334507397d..334507397d 100644
--- a/doc/README.alaska8220
+++ b/board/alaska/README
diff --git a/doc/README.bamboo b/board/amcc/bamboo/README
index e139c6d129..e139c6d129 100644
--- a/doc/README.bamboo
+++ b/board/amcc/bamboo/README
diff --git a/doc/README.ebony b/board/amcc/ebony/README
index 4df00b3561..4df00b3561 100644
--- a/doc/README.ebony
+++ b/board/amcc/ebony/README
diff --git a/doc/README.ocotea b/board/amcc/ocotea/README.ocotea
index be79b03c8a..be79b03c8a 100644
--- a/doc/README.ocotea
+++ b/board/amcc/ocotea/README.ocotea
diff --git a/doc/README.ocotea-PIBS-to-U-Boot b/board/amcc/ocotea/README.ocotea-PIBS-to-U-Boot
index 25dd2a2378..25dd2a2378 100644
--- a/doc/README.ocotea-PIBS-to-U-Boot
+++ b/board/amcc/ocotea/README.ocotea-PIBS-to-U-Boot
diff --git a/doc/README-integrator b/board/armltd/integrator/README
index 5a0e934924..5a0e934924 100644
--- a/doc/README-integrator
+++ b/board/armltd/integrator/README
diff --git a/doc/README.cmi b/board/cmi/README
index 0edd50ad22..0edd50ad22 100644
--- a/doc/README.cmi
+++ b/board/cmi/README
diff --git a/doc/README.COBRA5272 b/board/cobra5272/README
index ae0f148258..ae0f148258 100644
--- a/doc/README.COBRA5272
+++ b/board/cobra5272/README
diff --git a/doc/README.hawkboard b/board/davinci/da8xxevm/README.hawkboard
index d6ae02ec02..d6ae02ec02 100644
--- a/doc/README.hawkboard
+++ b/board/davinci/da8xxevm/README.hawkboard
diff --git a/doc/README.dnp5370 b/board/dnp5370/README
index 0172698e96..0172698e96 100644
--- a/doc/README.dnp5370
+++ b/board/dnp5370/README
diff --git a/doc/README.evb64260 b/board/evb64260/README
index 74211dea43..74211dea43 100644
--- a/doc/README.evb64260
+++ b/board/evb64260/README
diff --git a/doc/README.EVB-64260-750CX b/board/evb64260/README.EVB-64260-750CX
index 5ea38eaea3..5ea38eaea3 100644
--- a/doc/README.EVB-64260-750CX
+++ b/board/evb64260/README.EVB-64260-750CX
diff --git a/doc/README.fads b/board/fads/README
index bae9652f01..bae9652f01 100644
--- a/doc/README.fads
+++ b/board/fads/README
diff --git a/doc/README.m52277evb b/board/freescale/m52277evb/README
index b6e955bcad..b6e955bcad 100644
--- a/doc/README.m52277evb
+++ b/board/freescale/m52277evb/README
diff --git a/doc/README.m5253evbe b/board/freescale/m5253evbe/README
index f51609f3e0..f51609f3e0 100644
--- a/doc/README.m5253evbe
+++ b/board/freescale/m5253evbe/README
diff --git a/doc/README.m53017evb b/board/freescale/m53017evb/README
index 64a3d42f0c..64a3d42f0c 100644
--- a/doc/README.m53017evb
+++ b/board/freescale/m53017evb/README
diff --git a/doc/README.m5373evb b/board/freescale/m5373evb/README
index 419d4d6d1e..419d4d6d1e 100644
--- a/doc/README.m5373evb
+++ b/board/freescale/m5373evb/README
diff --git a/doc/README.m54455evb b/board/freescale/m54455evb/README
index 2bc6ce4bf3..2bc6ce4bf3 100644
--- a/doc/README.m54455evb
+++ b/board/freescale/m54455evb/README
diff --git a/doc/README.m5475evb b/board/freescale/m547xevb/README
index d3aec20e4f..d3aec20e4f 100644
--- a/doc/README.m5475evb
+++ b/board/freescale/m547xevb/README
diff --git a/doc/README.mpc7448hpc2 b/board/freescale/mpc7448hpc2/README
index cbb043e1d0..cbb043e1d0 100644
--- a/doc/README.mpc7448hpc2
+++ b/board/freescale/mpc7448hpc2/README
diff --git a/doc/README.mpc8313erdb b/board/freescale/mpc8313erdb/README
index be7ef32b45..be7ef32b45 100644
--- a/doc/README.mpc8313erdb
+++ b/board/freescale/mpc8313erdb/README
diff --git a/doc/README.mpc8315erdb b/board/freescale/mpc8315erdb/README
index b32132d053..b32132d053 100644
--- a/doc/README.mpc8315erdb
+++ b/board/freescale/mpc8315erdb/README
diff --git a/doc/README.mpc8323erdb b/board/freescale/mpc8323erdb/README
index 6f89829373..6f89829373 100644
--- a/doc/README.mpc8323erdb
+++ b/board/freescale/mpc8323erdb/README
diff --git a/doc/README.mpc832xemds b/board/freescale/mpc832xemds/README
index 4142aa9c8d..4142aa9c8d 100644
--- a/doc/README.mpc832xemds
+++ b/board/freescale/mpc832xemds/README
diff --git a/doc/README.mpc8349itx b/board/freescale/mpc8349itx/README
index 48bbd50356..48bbd50356 100644
--- a/doc/README.mpc8349itx
+++ b/board/freescale/mpc8349itx/README
diff --git a/doc/README.mpc8360emds b/board/freescale/mpc8360emds/README
index 6afa753969..6afa753969 100644
--- a/doc/README.mpc8360emds
+++ b/board/freescale/mpc8360emds/README
diff --git a/doc/README.mpc837xemds b/board/freescale/mpc837xemds/README
index faf21c9ffb..faf21c9ffb 100644
--- a/doc/README.mpc837xemds
+++ b/board/freescale/mpc837xemds/README
diff --git a/doc/README.mpc837xerdb b/board/freescale/mpc837xerdb/README
index cfb6efa27e..cfb6efa27e 100644
--- a/doc/README.mpc837xerdb
+++ b/board/freescale/mpc837xerdb/README
diff --git a/doc/README.mpc8536ds b/board/freescale/mpc8536ds/README
index 2a38bd6dda..2a38bd6dda 100644
--- a/doc/README.mpc8536ds
+++ b/board/freescale/mpc8536ds/README
diff --git a/doc/README.mpc8544ds b/board/freescale/mpc8544ds/README
index b49c3c07c4..b49c3c07c4 100644
--- a/doc/README.mpc8544ds
+++ b/board/freescale/mpc8544ds/README
diff --git a/doc/README.mpc8569mds b/board/freescale/mpc8569mds/README
index 3d12a964cd..3d12a964cd 100644
--- a/doc/README.mpc8569mds
+++ b/board/freescale/mpc8569mds/README
diff --git a/doc/README.mpc8572ds b/board/freescale/mpc8572ds/README
index 57fd2ad616..57fd2ad616 100644
--- a/doc/README.mpc8572ds
+++ b/board/freescale/mpc8572ds/README
diff --git a/doc/README.mpc8610hpcd b/board/freescale/mpc8610hpcd/README
index 31a9af3fee..31a9af3fee 100644
--- a/doc/README.mpc8610hpcd
+++ b/board/freescale/mpc8610hpcd/README
diff --git a/doc/README.mpc8641hpcn b/board/freescale/mpc8641hpcn/README
index d8fe0a4a13..d8fe0a4a13 100644
--- a/doc/README.mpc8641hpcn
+++ b/board/freescale/mpc8641hpcn/README
diff --git a/doc/README.mx35pdk b/board/freescale/mx35pdk/README
index 3d69ed5839..3d69ed5839 100644
--- a/doc/README.mx35pdk
+++ b/board/freescale/mx35pdk/README
diff --git a/doc/README.mx6qsabrelite b/board/freescale/mx6qsabrelite/README
index 6f2f5343de..6f2f5343de 100644
--- a/doc/README.mx6qsabrelite
+++ b/board/freescale/mx6qsabrelite/README
diff --git a/doc/README.p1022ds b/board/freescale/p1022ds/README
index 04d9197074..04d9197074 100644
--- a/doc/README.p1022ds
+++ b/board/freescale/p1022ds/README
diff --git a/doc/README.p1023rds b/board/freescale/p1023rds/README
index 685f5daa99..685f5daa99 100644
--- a/doc/README.p1023rds
+++ b/board/freescale/p1023rds/README
diff --git a/doc/README.p2020rdb b/board/freescale/p1_p2_rdb/README
index cb664a5bd7..cb664a5bd7 100644
--- a/doc/README.p2020rdb
+++ b/board/freescale/p1_p2_rdb/README
diff --git a/doc/README.p1_p2_rdb_pc b/board/freescale/p1_p2_rdb_pc/README
index 44377317dd..44377317dd 100644
--- a/doc/README.p1_p2_rdb_pc
+++ b/board/freescale/p1_p2_rdb_pc/README
diff --git a/doc/README.p2041rdb b/board/freescale/p2041rdb/README
index 292d0d39cf..292d0d39cf 100644
--- a/doc/README.p2041rdb
+++ b/board/freescale/p2041rdb/README
diff --git a/doc/README.p3060qds b/board/freescale/p3060qds/README
index ec627980c1..ec627980c1 100644
--- a/doc/README.p3060qds
+++ b/board/freescale/p3060qds/README
diff --git a/doc/README.IceCube b/board/icecube/README
index 5252bc9767..5252bc9767 100644
--- a/doc/README.IceCube
+++ b/board/icecube/README
diff --git a/doc/README.Lite5200B_low_power b/board/icecube/README.Lite5200B_low_power
index 5b04fbba72..5b04fbba72 100644
--- a/doc/README.Lite5200B_low_power
+++ b/board/icecube/README.Lite5200B_low_power
diff --git a/doc/README.INCA-IP b/board/incaip/README
index 132915292e..132915292e 100644
--- a/doc/README.INCA-IP
+++ b/board/incaip/README
diff --git a/doc/README.IPHASE4539 b/board/iphase4539/README
index c5146d9b18..c5146d9b18 100644
--- a/doc/README.IPHASE4539
+++ b/board/iphase4539/README
diff --git a/doc/README.kmeter1 b/board/keymile/km83xx/README.kmeter1
index 7f4fc999f8..7f4fc999f8 100644
--- a/doc/README.kmeter1
+++ b/board/keymile/km83xx/README.kmeter1
diff --git a/doc/README.korat b/board/korat/README
index e059f788c4..e059f788c4 100644
--- a/doc/README.korat
+++ b/board/korat/README
diff --git a/doc/README.mergerbox b/board/matrix_vision/mergerbox/README
index 1994b65be1..1994b65be1 100644
--- a/doc/README.mergerbox
+++ b/board/matrix_vision/mergerbox/README
diff --git a/doc/README.mvbc_p b/board/matrix_vision/mvbc_p/README.mvbc_p
index a691137550..a691137550 100644
--- a/doc/README.mvbc_p
+++ b/board/matrix_vision/mvbc_p/README.mvbc_p
diff --git a/doc/README.mvblm7 b/board/matrix_vision/mvblm7/README.mvblm7
index a0686f7fa5..a0686f7fa5 100644
--- a/doc/README.mvblm7
+++ b/board/matrix_vision/mvblm7/README.mvblm7
diff --git a/doc/README.mvsmr b/board/matrix_vision/mvsmr/README.mvsmr
index 8e34cb7838..8e34cb7838 100644
--- a/doc/README.mvsmr
+++ b/board/matrix_vision/mvsmr/README.mvsmr
diff --git a/doc/README.MBX b/board/mbx8xx/README
index c889fe9791..c889fe9791 100644
--- a/doc/README.MBX
+++ b/board/mbx8xx/README
diff --git a/doc/README.PIP405 b/board/mpl/pip405/README
index 012db1c5f7..012db1c5f7 100644
--- a/doc/README.PIP405
+++ b/board/mpl/pip405/README
diff --git a/doc/README.phytec.pcm030 b/board/phytec/pcm030/README
index 05faab68c8..05faab68c8 100644
--- a/doc/README.phytec.pcm030
+++ b/board/phytec/pcm030/README
diff --git a/board/qemu-mips/README b/board/qemu-mips/README
index 565241b587..9fd97e1249 100644
--- a/board/qemu-mips/README
+++ b/board/qemu-mips/README
@@ -13,3 +13,170 @@ Derived from au1x00 with a lot of things cut out.
Supports emulated flash (patch Jean-Christophe PLAGNIOL-VILLARD) with
recent qemu versions. When using emulated flash, launch with
-pflash <filename> and erase mips_bios.bin.
+
+
+
+Notes for the Qemu MIPS port
+----------------------------
+
+I) Example usage:
+
+# ln -s u-boot.bin mips_bios.bin
+start it:
+qemu-system-mips -L . /dev/null -nographic
+
+or
+
+if you use a qemu version after commit 4224
+
+create image:
+# dd of=flash bs=1k count=4k if=/dev/zero
+# dd of=flash bs=1k conv=notrunc if=u-boot.bin
+start it:
+# qemu-system-mips -M mips -pflash flash -monitor null -nographic
+
+2) Download kernel + initrd
+
+On ftp://ftp.denx.de/pub/contrib/Jean-Christophe_Plagniol-Villard/qemu_mips/
+you can downland
+
+#config to build the kernel
+qemu_mips_defconfig
+#patch to fix mips interrupt init on 2.6.24.y kernel
+qemu_mips_kernel.patch
+initrd.gz
+vmlinux
+vmlinux.bin
+System.map
+
+4) Generate uImage
+
+# tools/mkimage -A mips -O linux -T kernel -C gzip -a 0x80010000 -e 0x80245650 -n "Linux 2.6.24.y" -d vmlinux.bin.gz uImage
+
+5) Copy uImage to Flash
+# dd if=uImage bs=1k conv=notrunc seek=224 of=flash
+
+6) Generate Ide Disk
+
+# dd of=ide bs=1k cout=100k if=/dev/zero
+
+# sfdisk -C 261 -d ide
+# partition table of ide
+unit: sectors
+
+ ide1 : start= 63, size= 32067, Id=83
+ ide2 : start= 32130, size= 32130, Id=83
+ ide3 : start= 64260, size= 4128705, Id=83
+ ide4 : start= 0, size= 0, Id= 0
+
+7) Copy to ide
+
+# dd if=uImage bs=512 conv=notrunc seek=63 of=ide
+
+8) Generate ext2 on part 2 on Copy uImage and initrd.gz
+
+# Attached as loop device ide offset = 32130 * 512
+# losetup -o 16450560 -f ide
+# Format as ext2 ( arg2 : nb blocks)
+# mke2fs /dev/loop0 16065
+# losetup -d /dev/loop0
+# Mount and copy uImage and initrd.gz to it
+# mount -o loop,offset=16450560 -t ext2 ide /mnt
+# mkdir /mnt/boot
+# cp {initrd.gz,uImage} /mnt/boot/
+# Umount it
+# umount /mnt
+
+9) Set Environment
+
+setenv rd_start 0x80800000
+setenv rd_size 2663940
+setenv kernel BFC38000
+setenv oad_addr 80500000
+setenv load_addr2 80F00000
+setenv kernel_flash BFC38000
+setenv load_addr_hello 80200000
+setenv bootargs 'root=/dev/ram0 init=/bin/sh'
+setenv load_rd_ext2 'ide res; ext2load ide 0:2 ${rd_start} /boot/initrd.gz'
+setenv load_rd_tftp 'tftp ${rd_start} /initrd.gz'
+setenv load_kernel_hda 'ide res; diskboot ${load_addr} 0:2'
+setenv load_kernel_ext2 'ide res; ext2load ide 0:2 ${load_addr} /boot/uImage'
+setenv load_kernel_tftp 'tftp ${load_addr} /qemu_mips/uImage'
+setenv boot_ext2_ext2 'run load_rd_ext2; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
+setenv boot_ext2_flash 'run load_rd_ext2; run addmisc; bootm ${kernel_flash}'
+setenv boot_ext2_hda 'run load_rd_ext2; run load_kernel_hda; run addmisc; bootm ${load_addr}'
+setenv boot_ext2_tftp 'run load_rd_ext2; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
+setenv boot_tftp_hda 'run load_rd_tftp; run load_kernel_hda; run addmisc; bootm ${load_addr}'
+setenv boot_tftp_ext2 'run load_rd_tftp; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
+setenv boot_tftp_flash 'run load_rd_tftp; run addmisc; bootm ${kernel_flash}'
+setenv boot_tftp_tftp 'run load_rd_tftp; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
+setenv load_hello_tftp 'tftp ${load_addr_hello} /examples/hello_world.bin'
+setenv go_tftp 'run load_hello_tftp; go ${load_addr_hello}'
+setenv addmisc 'setenv bootargs ${bootargs} console=ttyS0,${baudrate} rd_start=${rd_start} rd_size=${rd_size} ethaddr=${ethaddr}'
+setenv bootcmd 'run boot_tftp_flash'
+
+10) Now you can boot from flash, ide, ide+ext2 and tfp
+
+# qemu-system-mips -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
+
+II) How to debug U-Boot
+
+In order to debug U-Boot you need to start qemu with gdb server support (-s)
+and waiting the connection to start the CPU (-S)
+
+# qemu-system-mips -S -s -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
+
+in an other console you start gdb
+
+1) Debugging of U-Boot Before Relocation
+
+Before relocation, the addresses in the ELF file can be used without any problems
+by connecting to the gdb server localhost:1234
+
+# mipsel-unknown-linux-gnu-gdb u-boot
+GNU gdb 6.6
+Copyright (C) 2006 Free Software Foundation, Inc.
+GDB is free software, covered by the GNU General Public License, and you are
+welcome to change it and/or distribute copies of it under certain conditions.
+Type "show copying" to see the conditions.
+There is absolutely no warranty for GDB. Type "show warranty" for details.
+This GDB was configured as "--host=i486-linux-gnu --target=mipsel-unknown-linux-gnu"...
+(gdb) target remote localhost:1234
+Remote debugging using localhost:1234
+_start () at start.S:64
+64 RVECENT(reset,0) /* U-boot entry point */
+Current language: auto; currently asm
+(gdb) b board.c:289
+Breakpoint 1 at 0xbfc00cc8: file board.c, line 289.
+(gdb) c
+Continuing.
+
+Breakpoint 1, board_init_f (bootflag=<value optimized out>) at board.c:290
+290 relocate_code (addr_sp, id, addr);
+Current language: auto; currently c
+(gdb) p/x addr
+$1 = 0x87fa0000
+
+2) Debugging of U-Boot After Relocation
+
+For debugging U-Boot after relocation we need to know the address to which
+U-Boot relocates itself to 0x87fa0000 by default.
+And replace the symbol table to this offset.
+
+(gdb) symbol-file
+Discard symbol table from `/private/u-boot-arm/u-boot'? (y or n) y
+Error in re-setting breakpoint 1:
+No symbol table is loaded. Use the "file" command.
+No symbol file now.
+(gdb) add-symbol-file u-boot 0x87fa0000
+add symbol table from file "u-boot" at
+ .text_addr = 0x87fa0000
+(y or n) y
+Reading symbols from /private/u-boot-arm/u-boot...done.
+Breakpoint 1 at 0x87fa0cc8: file board.c, line 289.
+(gdb) c
+Continuing.
+
+Program received signal SIGINT, Interrupt.
+0xffffffff87fa0de4 in udelay (usec=<value optimized out>) at time.c:78
+78 while ((tmo - read_c0_count()) < 0x7fffffff)
diff --git a/doc/README.sh7757lcr b/board/renesas/sh7757lcr/README.sh7757lcr
index 3e9c1c1a1e..3e9c1c1a1e 100644
--- a/doc/README.sh7757lcr
+++ b/board/renesas/sh7757lcr/README.sh7757lcr
diff --git a/doc/README.sh7785lcr b/board/renesas/sh7785lcr/README.sh7785lcr
index 56455fc162..56455fc162 100644
--- a/doc/README.sh7785lcr
+++ b/board/renesas/sh7785lcr/README.sh7785lcr
diff --git a/doc/README.sandbox b/board/sandbox/sandbox/README.sandbox
index 04692b34fa..04692b34fa 100644
--- a/doc/README.sandbox
+++ b/board/sandbox/sandbox/README.sandbox
diff --git a/board/sandpoint/README b/board/sandpoint/README
index 9e48168a24..a2e0831f33 100644
--- a/board/sandpoint/README
+++ b/board/sandpoint/README
@@ -13,3 +13,401 @@ seem to maintain it any more. I can be reached by mail as
tkoeller@gmx.net.
Thomas Koeller
+
+
+
+
+The port was tested on a Sandpoint 8240 X3 board, with U-Boot
+installed in the flash memory of the CPU card. Please use the
+following DIP switch settings:
+
+Motherboard:
+
+SW1.1: on SW1.2: on SW1.3: on SW1.4: on
+SW1.5: on SW1.6: on SW1.7: on SW1.8: on
+
+SW2.1: on SW2.2: on SW2.3: on SW2.4: on
+SW2.5: on SW2.6: on SW2.7: on SW2.8: on
+
+
+CPU Card:
+
+SW2.1: OFF SW2.2: OFF SW2.3: on SW2.4: on
+SW2.5: OFF SW2.6: OFF SW2.7: OFF SW2.8: OFF
+
+SW3.1: OFF SW3.2: on SW3.3: OFF SW3.4: OFF
+SW3.5: on SW3.6: OFF SW3.7: OFF SW3.8: on
+
+
+The followind detailed description of installation and initial steps
+with U-Boot and QNX was provided by Jim Sandoz <sandoz@lucent.com>:
+
+
+Directions for installing U-Boot on Sandpoint+Unity8240
+using the Abatron BDI2000 BDM/JTAG debugger ...
+
+Background and Reference info:
+http://u-boot.sourceforge.net/
+http://www.abatron.ch/
+http://www.abatron.ch/BDI/bdihw.html
+http://www.abatron.ch/DataSheets/BDI2000.pdf
+http://www.abatron.ch/Manuals/ManGdbCOP-2000C.pdf
+http://e-www.motorola.com/collateral/SPX3UM.pdf
+http://e-www.motorola.com/collateral/UNITYX4CONFIG.pdf
+
+
+Connection Diagram:
+ ===========
+ === ===== |----- |
+| | <---------------> | | | | |
+|PC | rs232 | BDI |=============[] | |
+| | |2000 | BDM probe | | |
+| | <---------------> | | |----- |
+ === ethernet ===== | |
+ | |
+ ===========
+ Sandpoint X3 with
+ Unity 8240 proc
+
+
+PART 1)
+ DIP Switch Settings:
+
+Sandpoint X3 8240 processor board DIP switch settings, with
+U-Boot to be installed in the flash memory of the CPU card:
+
+Motorola Sandpoint X3 Motherboard:
+SW1.1: on SW1.2: on SW1.3: on SW1.4: on
+SW1.5: on SW1.6: on SW1.7: on SW1.8: on
+SW2.1: on SW2.2: on SW2.3: on SW2.4: on
+SW2.5: on SW2.6: on SW2.7: on SW2.8: on
+
+Motorola Unity 8240 CPU Card:
+SW2.1: OFF SW2.2: OFF SW2.3: on SW2.4: on
+SW2.5: OFF SW2.6: OFF SW2.7: OFF SW2.8: OFF
+SW3.1: OFF SW3.2: on SW3.3: OFF SW3.4: OFF
+SW3.5: on SW3.6: OFF SW3.7: OFF SW3.8: on
+
+
+PART 2)
+ Connect the BDI2000 Cable to the Sandpoint/Unity 8240:
+
+BDM Pin 1 on the Unity 8240 processor board is towards the
+PCI PMC connectors, or away from the socketed SDRAM, i.e.:
+
+ ====================
+ | ---------------- |
+ | | SDRAM | |
+ | | | |
+ | ---------------- |
+ | |~| |
+ | |B| ++++++ |
+ | |D| + uP + |
+ | |M| +8240+ |
+ | ~ 1 ++++++ |
+ | |
+ | |
+ | |
+ | PMC conn ====== |
+ | ===== ====== |
+ | |
+ ====================
+
+
+PART 3)
+ Setting up the BDI2000, and preparing for TCP/IP network comms:
+
+Connect the BDI2000 to the PC using the supplied serial cable.
+Download the BDI2000 software and install it using setup.exe.
+
+[Note: of course you can also use the Linux command line tool
+"bdisetup" to configure your BDI2000 - the sources are included on
+the floppy disk that comes with your BDI2000. Just in case you don't
+have any Windows PC's - like me :-) -- wd ]
+
+Power up the BDI2000; then follow directions to assign the IP
+address and related network information. Note that U-Boot
+will be loaded to the Sandpoint via tftp. You need to either
+use the Abatron-provided tftp application or provide a tftp
+server (e.g. Linux/Solaris/*BSD) somewhere on your network.
+Once the IP address etc are assigned via the RS232 port,
+further communication with the BDI2000 will happen via the
+ethernet connection.
+
+PART 4)
+ Making a TCP/IP network connection to the Abatron BDI2000:
+
+Telnet to the Abatron BDI2000. Assuming that all of the
+networking info was loaded via RS232 correctly, you will see
+the following (scrolling):
+
+- TARGET: waiting for target Vcc
+- TARGET: waiting for target Vcc
+
+
+PART 5)
+ Power up the target Sandpoint:
+If the BDM connections are correct, the following will now appear:
+
+- TARGET: waiting for target Vcc
+- TARGET: waiting for target Vcc
+- TARGET: processing power-up delay
+- TARGET: processing user reset request
+- BDI asserts HRESET
+- Reset JTAG controller passed
+- Bypass check: 0x55 => 0xAA
+- Bypass check: 0x55 => 0xAA
+- JTAG exists check passed
+- Target PVR is 0x00810101
+- COP status is 0x01
+- Check running state passed
+- BDI scans COP freeze command
+- BDI removes HRESET
+- COP status is 0x05
+- Check stopped state passed
+- Check LSRL length passed
+- BDI sets breakpoint at 0xFFF00100
+- BDI resumes program execution
+- Waiting for target stop passed
+- TARGET: Target PVR is 0x00810101
+- TARGET: reseting target passed
+- TARGET: processing target startup ....
+- TARGET: processing target startup passed
+BDI>
+
+
+PART 6)
+ Erase the current contents of the flash memory:
+
+BDI>era 0xFFF00000
+ Erasing flash at 0xfff00000
+ Erasing flash passed
+BDI>era 0xFFF04000
+ Erasing flash at 0xfff04000
+ Erasing flash passed
+BDI>era 0xFFF06000
+ Erasing flash at 0xfff06000
+ Erasing flash passed
+BDI>era 0xFFF08000
+ Erasing flash at 0xfff08000
+ Erasing flash passed
+BDI>era 0xFFF10000
+ Erasing flash at 0xfff10000
+ Erasing flash passed
+BDI>era 0xFFF20000
+ Erasing flash at 0xfff20000
+ Erasing flash passed
+
+
+PART 7)
+ Program the flash memory with the U-Boot image:
+
+BDI>prog 0xFFF00000 u-boot.bin bin
+ Programming u-boot.bin , please wait ....
+ Programming flash passed
+
+
+PART 8)
+ Connect PC to Sandpoint:
+Using a crossover serial cable, attach the PC serial port to the
+Sandpoint's COM1. Set communications parameters to 8N1 / 9600 baud.
+
+
+PART 9)
+ Reset the Unity and begin U-Boot execution:
+
+BDI>reset
+- TARGET: processing user reset request
+- TARGET: Target PVR is 0x00810101
+- TARGET: reseting target passed
+- TARGET: processing target init list ....
+- TARGET: processing target init list passed
+
+BDI>go
+
+Now see output from U-Boot running, sent via serial port:
+
+U-Boot 1.1.4 (Jan 23 2002 - 18:29:19)
+
+CPU: MPC8240 Revision 1.1 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
+Board: Sandpoint 8240 Unity
+DRAM: 64 MB
+FLASH: 2 MB
+PCI: scanning bus0 ...
+ bus dev fn venID devID class rev MBAR0 MBAR1 IPIN ILINE
+ 00 00 00 1057 0003 060000 13 00000008 00000000 01 00
+ 00 0b 00 10ad 0565 060100 10 00000000 00000000 00 00
+ 00 0f 00 8086 1229 020000 08 80000000 80000001 01 00
+In: serial
+Out: serial
+Err: serial
+=>
+
+
+PART 10)
+ Set and save any required environmental variables, examples of some:
+
+=> setenv ethaddr 00:03:47:97:D0:79
+=> setenv bootfile your_qnx_image_here
+=> setenv hostname sandpointX
+=> setenv netmask 255.255.255.0
+=> setenv ipaddr 192.168.0.11
+=> setenv serverip 192.168.0.10
+=> setenv gatewayip=192.168.0.1
+=> saveenv
+Saving Environment to Flash...
+Un-Protected 1 sectors
+Erasing Flash...
+ done
+Erased 1 sectors
+Writing to Flash... done
+Protected 1 sectors
+=>
+
+**** Example environment: ****
+
+=> printenv
+baudrate=9600
+bootfile=telemetry
+hostname=sp1
+ethaddr=00:03:47:97:E4:6B
+load=tftp 100000 u-boot.bin
+update=protect off all;era FFF00000 FFF3FFFF;cp.b 100000 FFF00000 ${filesize};saveenv
+filesize=1f304
+gatewayip=145.17.228.1
+netmask=255.255.255.0
+ipaddr=145.17.228.42
+serverip=145.17.242.46
+stdin=serial
+stdout=serial
+stderr=serial
+
+Environment size: 332/8188 bytes
+=>
+
+here's some text useful stuff for cut-n-paste:
+setenv hostname sandpoint1
+setenv netmask 255.255.255.0
+setenv ipaddr 145.17.228.81
+setenv serverip 145.17.242.46
+setenv gatewayip 145.17.228.1
+saveenv
+
+PART 11)
+ Test U-Boot by tftp'ing new U-Boot, overwriting current:
+
+=> protect off all
+Un-Protect Flash Bank # 1
+=> tftp 100000 u-boot.bin
+eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
+ARP broadcast 1
+TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
+ gateway 145.17.228.1
+Filename 'u-boot.bin'.
+Load address: 0x100000
+Loading: #########################
+done
+Bytes transferred = 127628 (1f28c hex)
+=> era all
+Erase Flash Bank # 1
+ done
+Erase Flash Bank # 2 - missing
+=> cp.b 0x100000 FFF00000 1f28c
+Copy to Flash... done
+=> saveenv
+Saving Environment to Flash...
+Un-Protected 1 sectors
+Erasing Flash...
+ done
+Erased 1 sectors
+Writing to Flash... done
+Protected 1 sectors
+=> reset
+
+You can put these commands into some environment variables;
+
+=> setenv load tftp 100000 u-boot.bin
+=> setenv update protect off all\;era FFF00000 FFF3FFFF\;cp.b 100000 FFF00000 \${filesize}\;saveenv
+=> saveenv
+
+Then you just have to type "run load" then "run update"
+
+=> run load
+eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
+ARP broadcast 1
+TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
+ gateway 145.17.228.1
+Filename 'u-boot.bin'.
+Load address: 0x100000
+Loading: #########################
+done
+Bytes transferred = 127748 (1f304 hex)
+=> run update
+Un-Protect Flash Bank # 1
+Un-Protect Flash Bank # 2
+Erase Flash from 0xfff00000 to 0xfff3ffff
+ done
+Erased 7 sectors
+Copy to Flash... done
+Saving Environment to Flash...
+Un-Protected 1 sectors
+Erasing Flash...
+ done
+Erased 1 sectors
+Writing to Flash... done
+Protected 1 sectors
+=>
+
+
+PART 12)
+ Load OS image (ELF format) via U-Boot using tftp
+
+
+=> tftp 800000 sandpoint-simple.elf
+eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
+ARP broadcast 1
+TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
+ gateway 145.17.228.1
+Filename 'sandpoint-simple.elf'.
+Load address: 0x800000
+Loading: #################################################################
+ #################################################################
+ #################################################################
+ ########################
+done
+Bytes transferred = 1120284 (11181c hex)
+==>
+
+PART 13)
+ Begin OS image execution: (note that unless you have the
+serial parameters of your OS image set to 9600 (i.e. same as
+the U-Boot binary) you will get garbage here until you change
+the serial communications speed.
+
+=> bootelf 800000
+Loading @ 0x001f0100 (1120028 bytes)
+## Starting application at 0x001f1d28 ...
+Replace init_hwinfo() with a board specific version
+
+Loading QNX6....
+
+Header size=0x0000009c, Total Size=0x000005c0, #Cpu=1, Type=1
+<...loader and kernel messages snipped...>
+
+Welcome to Neutrino on the Sandpoint
+#
+
+
+other information:
+
+CVS Retrieval Notes:
+
+U-Boot's SourceForge CVS repository can be checked out
+through anonymous (pserver) CVS with the following
+instruction set. The module you wish to check out must
+be specified as the modulename. When prompted for a
+password for anonymous, simply press the Enter key.
+
+cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login
+
+cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot
diff --git a/doc/README.sbc8349 b/board/sbc8349/README
index 2c35919f28..2c35919f28 100644
--- a/doc/README.sbc8349
+++ b/board/sbc8349/README
diff --git a/doc/README.sbc8548 b/board/sbc8548/README
index feac5e3e63..feac5e3e63 100644
--- a/doc/README.sbc8548
+++ b/board/sbc8548/README
diff --git a/doc/README.SBC8560 b/board/sbc8560/README
index c4b642236e..c4b642236e 100644
--- a/doc/README.SBC8560
+++ b/board/sbc8560/README
diff --git a/doc/README.sbc8641d b/board/sbc8641d/README
index a051466a11..a051466a11 100644
--- a/doc/README.sbc8641d
+++ b/board/sbc8641d/README
diff --git a/doc/README.simpc8313 b/board/sheldon/simpc8313/README.simpc8313
index b362c6aeea..b362c6aeea 100644
--- a/doc/README.simpc8313
+++ b/board/sheldon/simpc8313/README.simpc8313
diff --git a/doc/README.nhk8815 b/board/st/nhk8815/README.nhk8815
index 9008e39363..9008e39363 100644
--- a/doc/README.nhk8815
+++ b/board/st/nhk8815/README.nhk8815
diff --git a/doc/README.stxxtc b/board/stx/stxxtc/README.stxxtc
index 7d9d4d3a2e..7d9d4d3a2e 100644
--- a/doc/README.stxxtc
+++ b/board/stx/stxxtc/README.stxxtc
diff --git a/doc/README.omap730p2 b/board/ti/omap730p2/README.omap730p2
index 7c70916120..7c70916120 100644
--- a/doc/README.omap730p2
+++ b/board/ti/omap730p2/README.omap730p2
diff --git a/doc/README.timll b/board/timll/devkit8000/README
index 609bf51aee..609bf51aee 100644
--- a/doc/README.timll
+++ b/board/timll/devkit8000/README
diff --git a/doc/README.TQM8260 b/board/tqc/tqm8260/README
index 93b55068f5..93b55068f5 100644
--- a/doc/README.TQM8260
+++ b/board/tqc/tqm8260/README
diff --git a/doc/README.xpedite1k b/board/xes/xpedite1000/README
index 1da8b800be..1da8b800be 100644
--- a/doc/README.xpedite1k
+++ b/board/xes/xpedite1000/README
diff --git a/doc/README.zeus b/board/zeus/README
index 1848d8cd38..1848d8cd38 100644
--- a/doc/README.zeus
+++ b/board/zeus/README
diff --git a/doc/README.OXC b/doc/README.OXC
deleted file mode 100644
index c5db5f8859..0000000000
--- a/doc/README.OXC
+++ /dev/null
@@ -1,24 +0,0 @@
-This document contains different information about the port
-of U-Boot for the OXC board designed by Lucent Technologies,
-Inc.
-
-1. Showing activity
-
-U-Boot for the OXC board can show its current status using
-the Active LED. This feature is configured by the following
-options:
-
-CONFIG_SHOW_ACTIVITY
-
- When this option is on, the Active LED is blinking fast
-when U-Boot runs in the idle loop (i.e. waits for user
-commands from serial console) and blinking slow when it
-downloads an image over network. When U-Boot loads an image
-over serial line the Active LED does not blink and its state
-is random (i.e. either constant on or constant off).
-
-CONFIG_SHOW_BOOT_PROGRESS
-
- When this option is on, U-Boot switches the Active LED
-off before booting an image and switches it on if booting
-failed due to some reasons.
diff --git a/doc/README.Sandpoint8240 b/doc/README.Sandpoint8240
deleted file mode 100644
index fa846dc33e..0000000000
--- a/doc/README.Sandpoint8240
+++ /dev/null
@@ -1,394 +0,0 @@
-The port was tested on a Sandpoint 8240 X3 board, with U-Boot
-installed in the flash memory of the CPU card. Please use the
-following DIP switch settings:
-
-Motherboard:
-
-SW1.1: on SW1.2: on SW1.3: on SW1.4: on
-SW1.5: on SW1.6: on SW1.7: on SW1.8: on
-
-SW2.1: on SW2.2: on SW2.3: on SW2.4: on
-SW2.5: on SW2.6: on SW2.7: on SW2.8: on
-
-
-CPU Card:
-
-SW2.1: OFF SW2.2: OFF SW2.3: on SW2.4: on
-SW2.5: OFF SW2.6: OFF SW2.7: OFF SW2.8: OFF
-
-SW3.1: OFF SW3.2: on SW3.3: OFF SW3.4: OFF
-SW3.5: on SW3.6: OFF SW3.7: OFF SW3.8: on
-
-
-The followind detailed description of installation and initial steps
-with U-Boot and QNX was provided by Jim Sandoz <sandoz@lucent.com>:
-
-
-Directions for installing U-Boot on Sandpoint+Unity8240
-using the Abatron BDI2000 BDM/JTAG debugger ...
-
-Background and Reference info:
-http://u-boot.sourceforge.net/
-http://www.abatron.ch/
-http://www.abatron.ch/BDI/bdihw.html
-http://www.abatron.ch/DataSheets/BDI2000.pdf
-http://www.abatron.ch/Manuals/ManGdbCOP-2000C.pdf
-http://e-www.motorola.com/collateral/SPX3UM.pdf
-http://e-www.motorola.com/collateral/UNITYX4CONFIG.pdf
-
-
-Connection Diagram:
- ===========
- === ===== |----- |
-| | <---------------> | | | | |
-|PC | rs232 | BDI |=============[] | |
-| | |2000 | BDM probe | | |
-| | <---------------> | | |----- |
- === ethernet ===== | |
- | |
- ===========
- Sandpoint X3 with
- Unity 8240 proc
-
-
-PART 1)
- DIP Switch Settings:
-
-Sandpoint X3 8240 processor board DIP switch settings, with
-U-Boot to be installed in the flash memory of the CPU card:
-
-Motorola Sandpoint X3 Motherboard:
-SW1.1: on SW1.2: on SW1.3: on SW1.4: on
-SW1.5: on SW1.6: on SW1.7: on SW1.8: on
-SW2.1: on SW2.2: on SW2.3: on SW2.4: on
-SW2.5: on SW2.6: on SW2.7: on SW2.8: on
-
-Motorola Unity 8240 CPU Card:
-SW2.1: OFF SW2.2: OFF SW2.3: on SW2.4: on
-SW2.5: OFF SW2.6: OFF SW2.7: OFF SW2.8: OFF
-SW3.1: OFF SW3.2: on SW3.3: OFF SW3.4: OFF
-SW3.5: on SW3.6: OFF SW3.7: OFF SW3.8: on
-
-
-PART 2)
- Connect the BDI2000 Cable to the Sandpoint/Unity 8240:
-
-BDM Pin 1 on the Unity 8240 processor board is towards the
-PCI PMC connectors, or away from the socketed SDRAM, i.e.:
-
- ====================
- | ---------------- |
- | | SDRAM | |
- | | | |
- | ---------------- |
- | |~| |
- | |B| ++++++ |
- | |D| + uP + |
- | |M| +8240+ |
- | ~ 1 ++++++ |
- | |
- | |
- | |
- | PMC conn ====== |
- | ===== ====== |
- | |
- ====================
-
-
-PART 3)
- Setting up the BDI2000, and preparing for TCP/IP network comms:
-
-Connect the BDI2000 to the PC using the supplied serial cable.
-Download the BDI2000 software and install it using setup.exe.
-
-[Note: of course you can also use the Linux command line tool
-"bdisetup" to configure your BDI2000 - the sources are included on
-the floppy disk that comes with your BDI2000. Just in case you don't
-have any Windows PC's - like me :-) -- wd ]
-
-Power up the BDI2000; then follow directions to assign the IP
-address and related network information. Note that U-Boot
-will be loaded to the Sandpoint via tftp. You need to either
-use the Abatron-provided tftp application or provide a tftp
-server (e.g. Linux/Solaris/*BSD) somewhere on your network.
-Once the IP address etc are assigned via the RS232 port,
-further communication with the BDI2000 will happen via the
-ethernet connection.
-
-PART 4)
- Making a TCP/IP network connection to the Abatron BDI2000:
-
-Telnet to the Abatron BDI2000. Assuming that all of the
-networking info was loaded via RS232 correctly, you will see
-the following (scrolling):
-
-- TARGET: waiting for target Vcc
-- TARGET: waiting for target Vcc
-
-
-PART 5)
- Power up the target Sandpoint:
-If the BDM connections are correct, the following will now appear:
-
-- TARGET: waiting for target Vcc
-- TARGET: waiting for target Vcc
-- TARGET: processing power-up delay
-- TARGET: processing user reset request
-- BDI asserts HRESET
-- Reset JTAG controller passed
-- Bypass check: 0x55 => 0xAA
-- Bypass check: 0x55 => 0xAA
-- JTAG exists check passed
-- Target PVR is 0x00810101
-- COP status is 0x01
-- Check running state passed
-- BDI scans COP freeze command
-- BDI removes HRESET
-- COP status is 0x05
-- Check stopped state passed
-- Check LSRL length passed
-- BDI sets breakpoint at 0xFFF00100
-- BDI resumes program execution
-- Waiting for target stop passed
-- TARGET: Target PVR is 0x00810101
-- TARGET: reseting target passed
-- TARGET: processing target startup ....
-- TARGET: processing target startup passed
-BDI>
-
-
-PART 6)
- Erase the current contents of the flash memory:
-
-BDI>era 0xFFF00000
- Erasing flash at 0xfff00000
- Erasing flash passed
-BDI>era 0xFFF04000
- Erasing flash at 0xfff04000
- Erasing flash passed
-BDI>era 0xFFF06000
- Erasing flash at 0xfff06000
- Erasing flash passed
-BDI>era 0xFFF08000
- Erasing flash at 0xfff08000
- Erasing flash passed
-BDI>era 0xFFF10000
- Erasing flash at 0xfff10000
- Erasing flash passed
-BDI>era 0xFFF20000
- Erasing flash at 0xfff20000
- Erasing flash passed
-
-
-PART 7)
- Program the flash memory with the U-Boot image:
-
-BDI>prog 0xFFF00000 u-boot.bin bin
- Programming u-boot.bin , please wait ....
- Programming flash passed
-
-
-PART 8)
- Connect PC to Sandpoint:
-Using a crossover serial cable, attach the PC serial port to the
-Sandpoint's COM1. Set communications parameters to 8N1 / 9600 baud.
-
-
-PART 9)
- Reset the Unity and begin U-Boot execution:
-
-BDI>reset
-- TARGET: processing user reset request
-- TARGET: Target PVR is 0x00810101
-- TARGET: reseting target passed
-- TARGET: processing target init list ....
-- TARGET: processing target init list passed
-
-BDI>go
-
-Now see output from U-Boot running, sent via serial port:
-
-U-Boot 1.1.4 (Jan 23 2002 - 18:29:19)
-
-CPU: MPC8240 Revision 1.1 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: Sandpoint 8240 Unity
-DRAM: 64 MB
-FLASH: 2 MB
-PCI: scanning bus0 ...
- bus dev fn venID devID class rev MBAR0 MBAR1 IPIN ILINE
- 00 00 00 1057 0003 060000 13 00000008 00000000 01 00
- 00 0b 00 10ad 0565 060100 10 00000000 00000000 00 00
- 00 0f 00 8086 1229 020000 08 80000000 80000001 01 00
-In: serial
-Out: serial
-Err: serial
-=>
-
-
-PART 10)
- Set and save any required environmental variables, examples of some:
-
-=> setenv ethaddr 00:03:47:97:D0:79
-=> setenv bootfile your_qnx_image_here
-=> setenv hostname sandpointX
-=> setenv netmask 255.255.255.0
-=> setenv ipaddr 192.168.0.11
-=> setenv serverip 192.168.0.10
-=> setenv gatewayip=192.168.0.1
-=> saveenv
-Saving Environment to Flash...
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Writing to Flash... done
-Protected 1 sectors
-=>
-
-**** Example environment: ****
-
-=> printenv
-baudrate=9600
-bootfile=telemetry
-hostname=sp1
-ethaddr=00:03:47:97:E4:6B
-load=tftp 100000 u-boot.bin
-update=protect off all;era FFF00000 FFF3FFFF;cp.b 100000 FFF00000 ${filesize};saveenv
-filesize=1f304
-gatewayip=145.17.228.1
-netmask=255.255.255.0
-ipaddr=145.17.228.42
-serverip=145.17.242.46
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 332/8188 bytes
-=>
-
-here's some text useful stuff for cut-n-paste:
-setenv hostname sandpoint1
-setenv netmask 255.255.255.0
-setenv ipaddr 145.17.228.81
-setenv serverip 145.17.242.46
-setenv gatewayip 145.17.228.1
-saveenv
-
-PART 11)
- Test U-Boot by tftp'ing new U-Boot, overwriting current:
-
-=> protect off all
-Un-Protect Flash Bank # 1
-=> tftp 100000 u-boot.bin
-eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
-ARP broadcast 1
-TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
- gateway 145.17.228.1
-Filename 'u-boot.bin'.
-Load address: 0x100000
-Loading: #########################
-done
-Bytes transferred = 127628 (1f28c hex)
-=> era all
-Erase Flash Bank # 1
- done
-Erase Flash Bank # 2 - missing
-=> cp.b 0x100000 FFF00000 1f28c
-Copy to Flash... done
-=> saveenv
-Saving Environment to Flash...
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Writing to Flash... done
-Protected 1 sectors
-=> reset
-
-You can put these commands into some environment variables;
-
-=> setenv load tftp 100000 u-boot.bin
-=> setenv update protect off all\;era FFF00000 FFF3FFFF\;cp.b 100000 FFF00000 \${filesize}\;saveenv
-=> saveenv
-
-Then you just have to type "run load" then "run update"
-
-=> run load
-eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
-ARP broadcast 1
-TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
- gateway 145.17.228.1
-Filename 'u-boot.bin'.
-Load address: 0x100000
-Loading: #########################
-done
-Bytes transferred = 127748 (1f304 hex)
-=> run update
-Un-Protect Flash Bank # 1
-Un-Protect Flash Bank # 2
-Erase Flash from 0xfff00000 to 0xfff3ffff
- done
-Erased 7 sectors
-Copy to Flash... done
-Saving Environment to Flash...
-Un-Protected 1 sectors
-Erasing Flash...
- done
-Erased 1 sectors
-Writing to Flash... done
-Protected 1 sectors
-=>
-
-
-PART 12)
- Load OS image (ELF format) via U-Boot using tftp
-
-
-=> tftp 800000 sandpoint-simple.elf
-eth: Intel i82559 PCI EtherExpressPro @0x80000000(bus=0, device=15, func=0)
-ARP broadcast 1
-TFTP from server 145.17.242.46; our IP address is 145.17.228.42; sending through
- gateway 145.17.228.1
-Filename 'sandpoint-simple.elf'.
-Load address: 0x800000
-Loading: #################################################################
- #################################################################
- #################################################################
- ########################
-done
-Bytes transferred = 1120284 (11181c hex)
-==>
-
-PART 13)
- Begin OS image execution: (note that unless you have the
-serial parameters of your OS image set to 9600 (i.e. same as
-the U-Boot binary) you will get garbage here until you change
-the serial communications speed.
-
-=> bootelf 800000
-Loading @ 0x001f0100 (1120028 bytes)
-## Starting application at 0x001f1d28 ...
-Replace init_hwinfo() with a board specific version
-
-Loading QNX6....
-
-Header size=0x0000009c, Total Size=0x000005c0, #Cpu=1, Type=1
-<...loader and kernel messages snipped...>
-
-Welcome to Neutrino on the Sandpoint
-#
-
-
-other information:
-
-CVS Retrieval Notes:
-
-U-Boot's SourceForge CVS repository can be checked out
-through anonymous (pserver) CVS with the following
-instruction set. The module you wish to check out must
-be specified as the modulename. When prompted for a
-password for anonymous, simply press the Enter key.
-
-cvs -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot login
-
-cvs -z6 -d:pserver:anonymous@cvs.u-boot.sourceforge.net:/cvsroot/u-boot co -P u-boot
diff --git a/doc/README.amigaone b/doc/README.amigaone
deleted file mode 100644
index 9975977917..0000000000
--- a/doc/README.amigaone
+++ /dev/null
@@ -1,12 +0,0 @@
-AmigaOne U-Boot and the SciTech emulator
-
-The directory board/MAI/bios_emulator contains the source code
-of the SciTech x86 emulator. This emulator is normally available
-under a BSD license. However, SciTech kindly gave us permission
-to use their emulator in PPCBoot for the AmigaOne. It's available
-in this form only under GPL.
-
-Thanks to Kendall Bennett and the rest of the team at SciTech.
-See http://www.scitechsoft.com for their web site
-
-The GPL license can be found at http://www.gnu.org/licenses/gpl.html
diff --git a/doc/README.p4080ds b/doc/README.p4080ds
deleted file mode 100644
index 3ed59a8cff..0000000000
--- a/doc/README.p4080ds
+++ /dev/null
@@ -1,32 +0,0 @@
-Overview
---------
-The P4080DS is a Freescale reference board that hosts the eight-core P4080 SOC.
-
-SerDes hwconfig configuration
------------------------------
-The P4080 RCW includes three sets of bits the specify which SerDes lanes
-should be powered down: SRDS_LPD_B1 (for bank one), SRDS_LPD_B2 (for bank two),
-and SRDS_LPD_B3 (for bank three). Each of these contains four bits, one for
-each lane in the bank. SerDes Erratum SERDES8 requires that SRDS_LPD_B2 and
-SRDS_LPD_B3 be set to 0b1111. This forces banks two and three to be powered
-down at reset.
-
-To re-enable these banks in U-Boot, two hwconfig are available:
-"fsl_srds_lpd_b2" and "fsl_srds_lpd_b3". The value passed via fsl_srds_lpd_b2
-is written into SRDS_LPD_B2, and the value passed via fsl_srds_lpd_b3 is into
-SRDS_LPD_B3. Each bit represents one of each bank, and a value of '1'
-indicates that the lane should be powered down.
-
-For example, to indicate that both SerDes banks 2 and 3 are powered down, add
-the following to hwconfig:
-
- serdes:fsl_srds_lpd_b2=0xf,fsl_srds_lpd_b3=0xf
-
-The "0xf" is a mask that corresponds to the 4 lanes A-D. The most significant
-bit corresponds to lane A. To indicate that just lane A of bank 3 is to be
-powered down, use:
-
- serdes:fsl_srds_lpd_b3=8
-
-These options should be specified only if U-Boot does not automatically power
-on the correct lanes.
diff --git a/doc/README.qemu_mips b/doc/README.qemu_mips
deleted file mode 100644
index e6a3855738..0000000000
--- a/doc/README.qemu_mips
+++ /dev/null
@@ -1,164 +0,0 @@
-
-Notes for the Qemu MIPS port
-
-I) Example usage:
-
-# ln -s u-boot.bin mips_bios.bin
-start it:
-qemu-system-mips -L . /dev/null -nographic
-
-or
-
-if you use a qemu version after commit 4224
-
-create image:
-# dd of=flash bs=1k count=4k if=/dev/zero
-# dd of=flash bs=1k conv=notrunc if=u-boot.bin
-start it:
-# qemu-system-mips -M mips -pflash flash -monitor null -nographic
-
-2) Download kernel + initrd
-
-On ftp://ftp.denx.de/pub/contrib/Jean-Christophe_Plagniol-Villard/qemu_mips/
-you can downland
-
-#config to build the kernel
-qemu_mips_defconfig
-#patch to fix mips interrupt init on 2.6.24.y kernel
-qemu_mips_kernel.patch
-initrd.gz
-vmlinux
-vmlinux.bin
-System.map
-
-4) Generate uImage
-
-# tools/mkimage -A mips -O linux -T kernel -C gzip -a 0x80010000 -e 0x80245650 -n "Linux 2.6.24.y" -d vmlinux.bin.gz uImage
-
-5) Copy uImage to Flash
-# dd if=uImage bs=1k conv=notrunc seek=224 of=flash
-
-6) Generate Ide Disk
-
-# dd of=ide bs=1k cout=100k if=/dev/zero
-
-# sfdisk -C 261 -d ide
-# partition table of ide
-unit: sectors
-
- ide1 : start= 63, size= 32067, Id=83
- ide2 : start= 32130, size= 32130, Id=83
- ide3 : start= 64260, size= 4128705, Id=83
- ide4 : start= 0, size= 0, Id= 0
-
-7) Copy to ide
-
-# dd if=uImage bs=512 conv=notrunc seek=63 of=ide
-
-8) Generate ext2 on part 2 on Copy uImage and initrd.gz
-
-# Attached as loop device ide offset = 32130 * 512
-# losetup -o 16450560 -f ide
-# Format as ext2 ( arg2 : nb blocks)
-# mke2fs /dev/loop0 16065
-# losetup -d /dev/loop0
-# Mount and copy uImage and initrd.gz to it
-# mount -o loop,offset=16450560 -t ext2 ide /mnt
-# mkdir /mnt/boot
-# cp {initrd.gz,uImage} /mnt/boot/
-# Umount it
-# umount /mnt
-
-9) Set Environment
-
-setenv rd_start 0x80800000
-setenv rd_size 2663940
-setenv kernel BFC38000
-setenv oad_addr 80500000
-setenv load_addr2 80F00000
-setenv kernel_flash BFC38000
-setenv load_addr_hello 80200000
-setenv bootargs 'root=/dev/ram0 init=/bin/sh'
-setenv load_rd_ext2 'ide res; ext2load ide 0:2 ${rd_start} /boot/initrd.gz'
-setenv load_rd_tftp 'tftp ${rd_start} /initrd.gz'
-setenv load_kernel_hda 'ide res; diskboot ${load_addr} 0:2'
-setenv load_kernel_ext2 'ide res; ext2load ide 0:2 ${load_addr} /boot/uImage'
-setenv load_kernel_tftp 'tftp ${load_addr} /qemu_mips/uImage'
-setenv boot_ext2_ext2 'run load_rd_ext2; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
-setenv boot_ext2_flash 'run load_rd_ext2; run addmisc; bootm ${kernel_flash}'
-setenv boot_ext2_hda 'run load_rd_ext2; run load_kernel_hda; run addmisc; bootm ${load_addr}'
-setenv boot_ext2_tftp 'run load_rd_ext2; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
-setenv boot_tftp_hda 'run load_rd_tftp; run load_kernel_hda; run addmisc; bootm ${load_addr}'
-setenv boot_tftp_ext2 'run load_rd_tftp; run load_kernel_ext2; run addmisc; bootm ${load_addr}'
-setenv boot_tftp_flash 'run load_rd_tftp; run addmisc; bootm ${kernel_flash}'
-setenv boot_tftp_tftp 'run load_rd_tftp; run load_kernel_tftp; run addmisc; bootm ${load_addr}'
-setenv load_hello_tftp 'tftp ${load_addr_hello} /examples/hello_world.bin'
-setenv go_tftp 'run load_hello_tftp; go ${load_addr_hello}'
-setenv addmisc 'setenv bootargs ${bootargs} console=ttyS0,${baudrate} rd_start=${rd_start} rd_size=${rd_size} ethaddr=${ethaddr}'
-setenv bootcmd 'run boot_tftp_flash'
-
-10) Now you can boot from flash, ide, ide+ext2 and tfp
-
-# qemu-system-mips -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
-
-II) How to debug U-Boot
-
-In order to debug U-Boot you need to start qemu with gdb server support (-s)
-and waiting the connection to start the CPU (-S)
-
-# qemu-system-mips -S -s -M mips -pflash flash -monitor null -nographic -net nic -net user -tftp `pwd` -hda ide
-
-in an other console you start gdb
-
-1) Debugging of U-Boot Before Relocation
-
-Before relocation, the addresses in the ELF file can be used without any problems
-by connecting to the gdb server localhost:1234
-
-# mipsel-unknown-linux-gnu-gdb u-boot
-GNU gdb 6.6
-Copyright (C) 2006 Free Software Foundation, Inc.
-GDB is free software, covered by the GNU General Public License, and you are
-welcome to change it and/or distribute copies of it under certain conditions.
-Type "show copying" to see the conditions.
-There is absolutely no warranty for GDB. Type "show warranty" for details.
-This GDB was configured as "--host=i486-linux-gnu --target=mipsel-unknown-linux-gnu"...
-(gdb) target remote localhost:1234
-Remote debugging using localhost:1234
-_start () at start.S:64
-64 RVECENT(reset,0) /* U-boot entry point */
-Current language: auto; currently asm
-(gdb) b board.c:289
-Breakpoint 1 at 0xbfc00cc8: file board.c, line 289.
-(gdb) c
-Continuing.
-
-Breakpoint 1, board_init_f (bootflag=<value optimized out>) at board.c:290
-290 relocate_code (addr_sp, id, addr);
-Current language: auto; currently c
-(gdb) p/x addr
-$1 = 0x87fa0000
-
-2) Debugging of U-Boot After Relocation
-
-For debugging U-Boot after relocation we need to know the address to which
-U-Boot relocates itself to 0x87fa0000 by default.
-And replace the symbol table to this offset.
-
-(gdb) symbol-file
-Discard symbol table from `/private/u-boot-arm/u-boot'? (y or n) y
-Error in re-setting breakpoint 1:
-No symbol table is loaded. Use the "file" command.
-No symbol file now.
-(gdb) add-symbol-file u-boot 0x87fa0000
-add symbol table from file "u-boot" at
- .text_addr = 0x87fa0000
-(y or n) y
-Reading symbols from /private/u-boot-arm/u-boot...done.
-Breakpoint 1 at 0x87fa0cc8: file board.c, line 289.
-(gdb) c
-Continuing.
-
-Program received signal SIGINT, Interrupt.
-0xffffffff87fa0de4 in udelay (usec=<value optimized out>) at time.c:78
-78 while ((tmo - read_c0_count()) < 0x7fffffff)
OpenPOWER on IntegriCloud