diff options
| -rw-r--r-- | arch/powerpc/cpu/ppc4xx/start.S | 28 | ||||
| -rw-r--r-- | arch/powerpc/cpu/ppc4xx/u-boot.lds | 8 | ||||
| -rw-r--r-- | board/lwmon5/sdram.c | 22 | ||||
| -rw-r--r-- | board/t3corp/t3corp.c | 38 | ||||
| -rw-r--r-- | board/xilinx/ppc405-generic/Makefile | 4 | ||||
| -rw-r--r-- | board/xilinx/ppc405-generic/u-boot-ram.lds | 131 | ||||
| -rw-r--r-- | board/xilinx/ppc405-generic/u-boot-rom.lds | 141 | ||||
| -rw-r--r-- | board/xilinx/ppc440-generic/Makefile | 4 | ||||
| -rw-r--r-- | board/xilinx/ppc440-generic/u-boot-ram.lds | 132 | ||||
| -rw-r--r-- | board/xilinx/ppc440-generic/u-boot-rom.lds | 142 | ||||
| -rw-r--r-- | boards.cfg | 20 | ||||
| -rw-r--r-- | drivers/mtd/spi/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mtd/spi/eon.c | 275 | ||||
| -rw-r--r-- | drivers/mtd/spi/spi_flash.c | 3 | ||||
| -rw-r--r-- | drivers/mtd/spi/spi_flash_internal.h | 1 | ||||
| -rw-r--r-- | drivers/mtd/spi/winbond.c | 39 | ||||
| -rw-r--r-- | include/configs/lwmon5.h | 22 | ||||
| -rw-r--r-- | include/configs/t3corp.h | 18 | ||||
| -rw-r--r-- | include/configs/xilinx-ppc.h | 1 | ||||
| -rw-r--r-- | post/cpu/ppc4xx/ether.c | 35 |
20 files changed, 451 insertions, 614 deletions
diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index 0e75794d22..2218508388 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -48,21 +48,23 @@ *------------------------------------------------------------------------------- */ -/* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards - * +/* + * Startup code for IBM/AMCC PowerPC 4xx (PPC4xx) based boards * - * The processor starts at 0xfffffffc and the code is executed - * from flash/rom. - * in memory, but as long we don't jump around before relocating. - * board_init lies at a quite high address and when the cpu has - * jumped there, everything is ok. - * This works because the cpu gives the FLASH (CS0) the whole - * address space at startup, and board_init lies as a echo of - * the flash somewhere up there in the memorymap. + * The following description only applies to the NOR flash style booting. + * NAND booting is different. For more details about NAND booting on 4xx + * take a look at doc/README.nand-boot-ppc440. * - * board_init will change CS0 to be positioned at the correct - * address and (s)dram will be positioned at address 0 + * The CPU starts at address 0xfffffffc (last word in the address space). + * The U-Boot image therefore has to be located in the "upper" area of the + * flash (e.g. 512MiB - 0xfff80000 ... 0xffffffff). The default value for + * the boot chip-select (CS0) is quite big and covers this area. On the + * 405EX this is for example 0xffe00000 ... 0xffffffff. U-Boot will + * reconfigure this CS0 (and other chip-selects as well when configured + * this way) in the boot process to the "correct" values matching the + * board layout. */ + #include <asm-offsets.h> #include <config.h> #include <asm/ppc4xx.h> @@ -265,7 +267,7 @@ /* NOTREACHED - board_init_f() does not return */ #endif -#if defined(CONFIG_SYS_RAMBOOT) +#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_BOOT_FROM_XMD) /* * 4xx RAM-booting U-Boot image is started from offset 0 */ diff --git a/arch/powerpc/cpu/ppc4xx/u-boot.lds b/arch/powerpc/cpu/ppc4xx/u-boot.lds index dac0e5b61c..842ff5f5ce 100644 --- a/arch/powerpc/cpu/ppc4xx/u-boot.lds +++ b/arch/powerpc/cpu/ppc4xx/u-boot.lds @@ -23,8 +23,12 @@ #include "config.h" /* CONFIG_BOARDDIR */ #ifndef RESET_VECTOR_ADDRESS +#ifdef CONFIG_RESET_VECTOR_ADDRESS +#define RESET_VECTOR_ADDRESS CONFIG_RESET_VECTOR_ADDRESS +#else #define RESET_VECTOR_ADDRESS 0xfffffffc #endif +#endif OUTPUT_ARCH(powerpc) @@ -100,7 +104,11 @@ SECTIONS * start.o, since the first shadow TLB only covers 4k * of address space. */ +#ifdef CONFIG_INIT_TLB + CONFIG_INIT_TLB (.bootpg) +#else CONFIG_BOARDDIR/init.o (.bootpg) +#endif } :text = 0xffff #endif diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c index f90efebb8a..b64b35a94e 100644 --- a/board/lwmon5/sdram.c +++ b/board/lwmon5/sdram.c @@ -45,10 +45,10 @@ * memory. * * If at some time this restriction doesn't apply anymore, just define - * CONFIG_SYS_ENABLE_SDRAM_CACHE in the board config file and this code should setup + * CONFIG_4xx_DCACHE in the board config file and this code should setup * everything correctly. */ -#ifdef CONFIG_SYS_ENABLE_SDRAM_CACHE +#ifdef CONFIG_4xx_DCACHE #define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */ #else #define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ @@ -220,18 +220,32 @@ phys_size_t initdram (int board_type) program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20, MY_TLB_WORD2_I_ENABLE); +#if defined(CONFIG_DDR_ECC) +#if defined(CONFIG_4xx_DCACHE) + /* + * If ECC is enabled, initialize the parity bits. + */ + program_ecc(0, CONFIG_SYS_MBYTES_SDRAM << 20, 0); +#else /* CONFIG_4xx_DCACHE */ /* * Setup 2nd TLB with same physical address but different virtual address * with cache enabled. This is done for fast ECC generation. */ program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0); -#ifdef CONFIG_DDR_ECC /* * If ECC is enabled, initialize the parity bits. */ program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0); -#endif + + /* + * Now after initialization (auto-calibration and ECC generation) + * remove the TLB entries with caches enabled and program again with + * desired cache functionality + */ + remove_tlb(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20); +#endif /* CONFIG_4xx_DCACHE */ +#endif /* CONFIG_DDR_ECC */ /* * Clear possible errors resulting from data-eye-search. diff --git a/board/t3corp/t3corp.c b/board/t3corp/t3corp.c index 04d6a2e2af..f2853e42e5 100644 --- a/board/t3corp/t3corp.c +++ b/board/t3corp/t3corp.c @@ -23,6 +23,7 @@ #include <libfdt.h> #include <fdt_support.h> #include <i2c.h> +#include <mtd/cfi_flash.h> #include <asm/processor.h> #include <asm/io.h> #include <asm/mmu.h> @@ -191,3 +192,40 @@ struct sdram_timing *ddr_scan_option(struct sdram_timing *default_val) { return board_scan_options; } + +/* + * Accessor functions replacing the "weak" functions in + * drivers/mtd/cfi_flash.c + * + * The NOR flash devices "behind" the FPGA's (Xilinx DS617) + * can only be read correctly in 16bit mode. We need to emulate + * 8bit and 32bit reads here in the board specific code. + */ +u8 flash_read8(void *addr) +{ + u16 val = __raw_readw((void *)((u32)addr & ~1)); + + if ((u32)addr & 1) + return val; + + return val >> 8; +} + +u32 flash_read32(void *addr) +{ + return (__raw_readw(addr) << 16) | __raw_readw((void *)((u32)addr + 2)); +} + +void flash_cmd_reset(flash_info_t *info) +{ + /* + * FLASH at address CONFIG_SYS_FLASH_BASE is a Spansion chip and + * needs the Spansion type reset commands. The other flash chip + * is located behind a FPGA (Xilinx DS617) and needs the Intel type + * reset command. + */ + if (info->start[0] == CONFIG_SYS_FLASH_BASE) + flash_write_cmd(info, 0, 0, AMD_CMD_RESET); + else + flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); +} diff --git a/board/xilinx/ppc405-generic/Makefile b/board/xilinx/ppc405-generic/Makefile index 4b8e4f422f..717ffc9c9f 100644 --- a/board/xilinx/ppc405-generic/Makefile +++ b/board/xilinx/ppc405-generic/Makefile @@ -41,7 +41,9 @@ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) +all: $(LIB) $(SOBJS) + +$(LIB): $(OBJS) $(call cmd_link_o_target, $^) clean: diff --git a/board/xilinx/ppc405-generic/u-boot-ram.lds b/board/xilinx/ppc405-generic/u-boot-ram.lds deleted file mode 100644 index a7539fde41..0000000000 --- a/board/xilinx/ppc405-generic/u-boot-ram.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -ENTRY(_start) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - - ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your configuration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and CONFIG_SYS_TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/xilinx/ppc405-generic/u-boot-rom.lds b/board/xilinx/ppc405-generic/u-boot-rom.lds deleted file mode 100644 index 074f3c24ab..0000000000 --- a/board/xilinx/ppc405-generic/u-boot-rom.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -ENTRY(_start) - -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - arch/powerpc/cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - - ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your configuration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and CONFIG_SYS_TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/xilinx/ppc440-generic/Makefile b/board/xilinx/ppc440-generic/Makefile index d84cf69ab9..1760e4e3be 100644 --- a/board/xilinx/ppc440-generic/Makefile +++ b/board/xilinx/ppc440-generic/Makefile @@ -43,7 +43,9 @@ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) +all: $(LIB) $(SOBJS) + +$(LIB): $(OBJS) $(call cmd_link_o_target, $^) clean: diff --git a/board/xilinx/ppc440-generic/u-boot-ram.lds b/board/xilinx/ppc440-generic/u-boot-ram.lds deleted file mode 100644 index 203f0623bb..0000000000 --- a/board/xilinx/ppc440-generic/u-boot-ram.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -ENTRY(_start_440) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and CONFIG_SYS_TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/xilinx/ppc440-generic/u-boot-rom.lds b/board/xilinx/ppc440-generic/u-boot-rom.lds deleted file mode 100644 index b67617dcad..0000000000 --- a/board/xilinx/ppc440-generic/u-boot-rom.lds +++ /dev/null @@ -1,142 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -ENTRY(_start_440) - -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - arch/powerpc/cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and CONFIG_SYS_TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/boards.cfg b/boards.cfg index 6cebc27aab..94b8745a97 100644 --- a/boards.cfg +++ b/boards.cfg @@ -675,10 +675,10 @@ yellowstone powerpc ppc4xx yosemite amcc yosemite powerpc ppc4xx yosemite amcc - yosemite:YOSEMITE yucca powerpc ppc4xx - amcc AP1000 powerpc ppc4xx ap1000 amirix -fx12mm powerpc ppc4xx fx12mm avnet - fx12mm:SYS_TEXT_BASE=0x03000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds -fx12mm_flash powerpc ppc4xx fx12mm avnet - fx12mm:SYS_TEXT_BASE=0xFFCB0000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds -v5fx30teval powerpc ppc4xx v5fx30teval avnet - v5fx30teval:SYS_TEXT_BASE=0x03000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds -v5fx30teval_flash powerpc ppc4xx v5fx30teval avnet - v5fx30teval:SYS_TEXT_BASE=0xFF1C0000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds +fx12mm powerpc ppc4xx fx12mm avnet - fx12mm:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC,INIT_TLB=board/xilinx/ppc405-generic/init.o +fx12mm_flash powerpc ppc4xx fx12mm avnet - fx12mm:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc405-generic/init.o +v5fx30teval powerpc ppc4xx v5fx30teval avnet - v5fx30teval:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o +v5fx30teval_flash powerpc ppc4xx v5fx30teval avnet - v5fx30teval:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o CRAYL1 powerpc ppc4xx L1 cray CATcenter powerpc ppc4xx PPChameleonEVB dave - CATcenter:PPCHAMELEON_MODULE_MODEL=1 CATcenter_25 powerpc ppc4xx PPChameleonEVB dave - CATcenter:PPCHAMELEON_MODULE_MODEL=1,PPCHAMELEON_CLK_25 @@ -736,12 +736,12 @@ p3p440 powerpc ppc4xx - prodriv KAREF powerpc ppc4xx karef sandburst METROBOX powerpc ppc4xx metrobox sandburst xpedite1000 powerpc ppc4xx - xes -ml507 powerpc ppc4xx ml507 xilinx - ml507:SYS_TEXT_BASE=0x04000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds -ml507_flash powerpc ppc4xx ml507 xilinx - ml507:SYS_TEXT_BASE=0xFE360000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds -xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0x04000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds -xilinx-ppc405-generic_flash powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0xFE360000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds -xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0x04000000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds -xilinx-ppc440-generic_flash powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0xFE360000,SYS_LDSCRIPT=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds +ml507 powerpc ppc4xx ml507 xilinx - ml507:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC,BOOT_FROM_XMD=1,INIT_TLB=board/xilinx/ppc440-generic/init.o +ml507_flash powerpc ppc4xx ml507 xilinx - ml507:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC,INIT_TLB=board/xilinx/ppc440-generic/init.o +xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC +xilinx-ppc405-generic_flash powerpc ppc4xx ppc405-generic xilinx - xilinx-ppc405-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC +xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x03FFFFFC,BOOT_FROM_XMD=1 +xilinx-ppc440-generic_flash powerpc ppc4xx ppc440-generic xilinx - xilinx-ppc440-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC rsk7203 sh sh2 rsk7203 renesas - mpr2 sh sh3 mpr2 - - ms7720se sh sh3 ms7720se - - diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index 3d607c06d3..57112af66f 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -27,6 +27,7 @@ LIB := $(obj)libspi_flash.o COBJS-$(CONFIG_SPI_FLASH) += spi_flash.o COBJS-$(CONFIG_SPI_FLASH_ATMEL) += atmel.o +COBJS-$(CONFIG_SPI_FLASH_EON) += eon.o COBJS-$(CONFIG_SPI_FLASH_MACRONIX) += macronix.o COBJS-$(CONFIG_SPI_FLASH_SPANSION) += spansion.o COBJS-$(CONFIG_SPI_FLASH_SST) += sst.o diff --git a/drivers/mtd/spi/eon.c b/drivers/mtd/spi/eon.c new file mode 100644 index 0000000000..02c3bb9304 --- /dev/null +++ b/drivers/mtd/spi/eon.c @@ -0,0 +1,275 @@ +/* + * (C) Copyright 2010, ucRobotics Inc. + * Author: Chong Huang <chuang@ucrobotics.com> + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <malloc.h> +#include <spi_flash.h> + +#include "spi_flash_internal.h" + +/* EN25Q128-specific commands */ +#define CMD_EN25Q128_WREN 0x06 /* Write Enable */ +#define CMD_EN25Q128_WRDI 0x04 /* Write Disable */ +#define CMD_EN25Q128_RDSR 0x05 /* Read Status Register */ +#define CMD_EN25Q128_WRSR 0x01 /* Write Status Register */ +#define CMD_EN25Q128_READ 0x03 /* Read Data Bytes */ +#define CMD_EN25Q128_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */ +#define CMD_EN25Q128_PP 0x02 /* Page Program */ +#define CMD_EN25Q128_SE 0x20 /* Sector Erase */ +#define CMD_EN25Q128_BE 0xd8 /* Block Erase */ +#define CMD_EN25Q128_DP 0xb9 /* Deep Power-down */ +#define CMD_EN25Q128_RES 0xab /* Release from DP, and Read Signature */ + +#define EON_ID_EN25Q128 0x18 + +#define EON_SR_WIP (1 << 0) /* Write-in-Progress */ + +struct eon_spi_flash_params { + u8 idcode1; + u16 page_size; + u16 pages_per_sector; + u16 sectors_per_block; + u16 nr_sectors; + const char *name; +}; + +/* spi_flash needs to be first so upper layers can free() it */ +struct eon_spi_flash { + struct spi_flash flash; + const struct eon_spi_flash_params *params; +}; + +static inline struct eon_spi_flash *to_eon_spi_flash(struct spi_flash *flash) +{ + return container_of(flash, struct eon_spi_flash, flash); +} + +static const struct eon_spi_flash_params eon_spi_flash_table[] = { + { + .idcode1 = EON_ID_EN25Q128, + .page_size = 256, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_sectors = 4096, + .name = "EN25Q128", + }, +}; + +static int eon_wait_ready(struct spi_flash *flash, unsigned long timeout) +{ + struct spi_slave *spi = flash->spi; + unsigned long timebase; + int ret; + u8 cmd = CMD_EN25Q128_RDSR; + u8 status; + + ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN); + if (ret) { + debug("SF: Failed to send command %02x: %d\n", cmd, ret); + return ret; + } + + timebase = get_timer(0); + do { + ret = spi_xfer(spi, 8, NULL, &status, 0); + if (ret) + return -1; + + if ((status & EON_SR_WIP) == 0) + break; + + } while (get_timer(timebase) < timeout); + + spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END); + + if ((status & EON_SR_WIP) == 0) + return 0; + + /* Timed out */ + return -1; +} + +static int eon_read_fast(struct spi_flash *flash, + u32 offset, size_t len, void *buf) +{ + struct eon_spi_flash *eon = to_eon_spi_flash(flash); + unsigned long page_addr; + unsigned long page_size; + u8 cmd[5]; + + page_size = eon->params->page_size; + page_addr = offset / page_size; + + cmd[0] = CMD_READ_ARRAY_FAST; + cmd[1] = page_addr >> 8; + cmd[2] = page_addr; + cmd[3] = offset % page_size; + cmd[4] = 0x00; + + return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len); +} + +static int eon_write(struct spi_flash *flash, + u32 offset, size_t len, const void *buf) +{ + struct eon_spi_flash *eon = to_eon_spi_flash(flash); + unsigned long page_addr; + unsigned long byte_addr; + unsigned long page_size; + size_t chunk_len; + size_t actual; + int ret; + u8 cmd[4]; + + page_size = eon->params->page_size; + page_addr = offset / page_size; + byte_addr = offset % page_size; + + ret = spi_claim_bus(flash->spi); + if (ret) { + debug("SF: Unable to claim SPI bus\n"); + return ret; + } + + ret = 0; + for (actual = 0; actual < len; actual += chunk_len) { + chunk_len = min(len - actual, page_size - byte_addr); + + cmd[0] = CMD_EN25Q128_PP; + cmd[1] = page_addr >> 8; + cmd[2] = page_addr; + cmd[3] = byte_addr; + + debug + ("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %d\n", + buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); + + ret = spi_flash_cmd(flash->spi, CMD_EN25Q128_WREN, NULL, 0); + if (ret < 0) { + debug("SF: Enabling Write failed\n"); + break; + } + + ret = spi_flash_cmd_write(flash->spi, cmd, 4, + buf + actual, chunk_len); + if (ret < 0) { + debug("SF: EON Page Program failed\n"); + break; + } + + ret = eon_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT); + if (ret < 0) { + debug("SF: EON page programming timed out\n"); + break; + } + + page_addr++; + byte_addr = 0; + } + + debug("SF: EON: Successfully programmed %u bytes @ 0x%x\n", + len, offset); + + spi_release_bus(flash->spi); + return ret; +} + +int eon_erase(struct spi_flash *flash, u32 offset, size_t len) +{ + /* block erase */ + struct eon_spi_flash *eon = to_eon_spi_flash(flash); + unsigned long block_size; + size_t actual; + int ret; + u8 cmd[4]; + + + block_size = eon->params->page_size * eon->params->pages_per_sector + * eon->params->sectors_per_block; + + if (offset % block_size || len % block_size) { + debug("SF: Erase offset/length not multiple of block size\n"); + return -1; + } + + len /= block_size; + cmd[0] = CMD_EN25Q128_BE; + cmd[2] = 0x00; + cmd[3] = 0x00; + + ret = spi_claim_bus(flash->spi); + if (ret) { + debug("SF: Unable to claim SPI bus\n"); + return ret; + } + + ret = 0; + for (actual = 0; actual < len; actual++) { + cmd[1] = (offset / block_size) + actual; + ret = spi_flash_cmd(flash->spi, CMD_EN25Q128_WREN, NULL, 0); + if (ret < 0) { + debug("SF: Enabling Write failed\n"); + break; + } + + ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0); + if (ret < 0) { + debug("SF: EON page erase failed\n"); + break; + } + + ret = eon_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT); + if (ret < 0) { + debug("SF: EON page erase timed out\n"); + break; + } + } + + debug("SF: EON: Successfully erased %u bytes @ 0x%x\n", + len * block_size, offset); + + spi_release_bus(flash->spi); + return ret; +} + +struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode) +{ + const struct eon_spi_flash_params *params; + struct eon_spi_flash *eon; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(eon_spi_flash_table); ++i) { + params = &eon_spi_flash_table[i]; + if (params->idcode1 == idcode[2]) + break; + } + + if (i == ARRAY_SIZE(eon_spi_flash_table)) { + debug("SF: Unsupported EON ID %02x\n", idcode[1]); + return NULL; + } + + eon = malloc(sizeof(*eon)); + if (!eon) { + debug("SF: Failed to allocate memory\n"); + return NULL; + } + + eon->params = params; + eon->flash.spi = spi; + eon->flash.name = params->name; + + eon->flash.write = eon_write; + eon->flash.erase = eon_erase; + eon->flash.read = eon_read_fast; + eon->flash.size = params->page_size * params->pages_per_sector + * params->nr_sectors; + + debug("SF: Detected %s with page size %u, total %u bytes\n", + params->name, params->page_size, eon->flash.size); + + return &eon->flash; +} diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c index ab02ef3e04..b61d2198cd 100644 --- a/drivers/mtd/spi/spi_flash.c +++ b/drivers/mtd/spi/spi_flash.c @@ -131,6 +131,9 @@ static const struct { #ifdef CONFIG_SPI_FLASH_ATMEL { 0, 0x1f, spi_flash_probe_atmel, }, #endif +#ifdef CONFIG_SPI_FLASH_EON + { 0, 0x1c, spi_flash_probe_eon, }, +#endif #ifdef CONFIG_SPI_FLASH_MACRONIX { 0, 0xc2, spi_flash_probe_macronix, }, #endif diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h index 9bc43dd21e..68dcffb971 100644 --- a/drivers/mtd/spi/spi_flash_internal.h +++ b/drivers/mtd/spi/spi_flash_internal.h @@ -46,6 +46,7 @@ int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd, /* Manufacturer-specific probe functions */ struct spi_flash *spi_flash_probe_spansion(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode); +struct spi_flash *spi_flash_probe_eon(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode); struct spi_flash *spi_flash_probe_stmicro(struct spi_slave *spi, u8 *idcode); diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c index de3aeb810a..44523555d9 100644 --- a/drivers/mtd/spi/winbond.c +++ b/drivers/mtd/spi/winbond.c @@ -24,11 +24,6 @@ #define CMD_W25_DP 0xb9 /* Deep Power-down */ #define CMD_W25_RES 0xab /* Release from DP, and Read Signature */ -#define WINBOND_ID_W25X16 0x3015 -#define WINBOND_ID_W25X32 0x3016 -#define WINBOND_ID_W25X64 0x3017 -#define WINBOND_ID_W25Q64 0x4017 - #define WINBOND_SR_WIP (1 << 0) /* Write-in-Progress */ struct winbond_spi_flash_params { @@ -37,7 +32,7 @@ struct winbond_spi_flash_params { uint8_t l2_page_size; uint16_t pages_per_sector; uint16_t sectors_per_block; - uint8_t nr_blocks; + uint16_t nr_blocks; const char *name; }; @@ -55,7 +50,7 @@ to_winbond_spi_flash(struct spi_flash *flash) static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { { - .id = WINBOND_ID_W25X16, + .id = 0x3015, .l2_page_size = 8, .pages_per_sector = 16, .sectors_per_block = 16, @@ -63,7 +58,7 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { .name = "W25X16", }, { - .id = WINBOND_ID_W25X32, + .id = 0x3016, .l2_page_size = 8, .pages_per_sector = 16, .sectors_per_block = 16, @@ -71,7 +66,7 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { .name = "W25X32", }, { - .id = WINBOND_ID_W25X64, + .id = 0x3017, .l2_page_size = 8, .pages_per_sector = 16, .sectors_per_block = 16, @@ -79,13 +74,37 @@ static const struct winbond_spi_flash_params winbond_spi_flash_table[] = { .name = "W25X64", }, { - .id = WINBOND_ID_W25Q64, + .id = 0x4015, + .l2_page_size = 8, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 32, + .name = "W25Q16", + }, + { + .id = 0x4016, + .l2_page_size = 8, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 64, + .name = "W25Q32", + }, + { + .id = 0x4017, .l2_page_size = 8, .pages_per_sector = 16, .sectors_per_block = 16, .nr_blocks = 128, .name = "W25Q64", }, + { + .id = 0x4018, + .l2_page_size = 8, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 256, + .name = "W25Q128", + }, }; static int winbond_wait_ready(struct spi_flash *flash, unsigned long timeout) diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 4c9744ca4f..aedf495104 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -43,6 +43,8 @@ #define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */ +#define CONFIG_4xx_DCACHE /* enable cache in SDRAM */ + #define CONFIG_BOARD_EARLY_INIT_F /* Call board_early_init_f */ #define CONFIG_BOARD_EARLY_INIT_R /* Call board_early_init_r */ #define CONFIG_BOARD_POSTCLK_INIT /* Call board_postclk_init */ @@ -321,6 +323,8 @@ /* Update size in "reg" property of NOR FLASH device tree nodes */ #define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE +#define CONFIG_FIT /* enable FIT image support */ + #define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */ #define CONFIG_PREBOOT "setenv bootdelay 15" @@ -393,16 +397,18 @@ #define CONFIG_VIDEO_SW_CURSOR #define CONFIG_SPLASH_SCREEN -/* USB */ -#ifdef CONFIG_440EPX -#define CONFIG_USB_OHCI +/* + * USB/EHCI + */ +#define CONFIG_USB_EHCI /* Enable EHCI USB support */ +#define CONFIG_USB_EHCI_PPC4XX /* on PPC4xx platform */ +#define CONFIG_SYS_PPC4XX_USB_ADDR 0xe0000300 +#define CONFIG_EHCI_DCACHE /* with dcache handling support */ +#define CONFIG_EHCI_MMIO_BIG_ENDIAN +#define CONFIG_EHCI_DESC_BIG_ENDIAN +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */ #define CONFIG_USB_STORAGE -/* Comment this out to enable USB 1.1 device */ -#define USB_2_0_DEVICE - -#endif /* CONFIG_440EPX */ - /* Partitions */ #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION diff --git a/include/configs/t3corp.h b/include/configs/t3corp.h index 6115a5f413..2a731a637b 100644 --- a/include/configs/t3corp.h +++ b/include/configs/t3corp.h @@ -120,11 +120,16 @@ */ #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD reset cmd */ +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS #define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* use status poll method */ +#define CONFIG_SYS_FLASH_PROTECTION /* use hardware flash protection */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ + (CONFIG_SYS_FPGA1_BASE + 0x01000000) } +#define CONFIG_SYS_CFI_FLASH_CONFIG_REGS { 0xffff, /* don't set */ \ + 0xbddf } /* set async read mode */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of memory banks */ #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors p. chip*/ #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms*/ @@ -355,6 +360,7 @@ "ramdisk_addr=fc200000\0" \ "pciconfighost=1\0" \ "pcie_mode=RP:RP\0" \ + "unlock=yes\0" \ "" /* @@ -423,7 +429,7 @@ EBC_BXAP_WBN_ENCODE(0) | \ EBC_BXAP_WBF_ENCODE(0) | \ EBC_BXAP_TH_ENCODE(1) | \ - EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_RE_ENABLED | \ EBC_BXAP_SOR_DELAYED | \ EBC_BXAP_BEM_RW | \ EBC_BXAP_PEN_DISABLED) @@ -440,7 +446,7 @@ EBC_BXAP_WBN_ENCODE(0) | \ EBC_BXAP_WBF_ENCODE(0) | \ EBC_BXAP_TH_ENCODE(1) | \ - EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_RE_ENABLED | \ EBC_BXAP_SOR_DELAYED | \ EBC_BXAP_BEM_RW | \ EBC_BXAP_PEN_DISABLED) @@ -457,7 +463,7 @@ EBC_BXAP_WBN_ENCODE(0) | \ EBC_BXAP_WBF_ENCODE(0) | \ EBC_BXAP_TH_ENCODE(1) | \ - EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_RE_ENABLED | \ EBC_BXAP_SOR_DELAYED | \ EBC_BXAP_BEM_RW | \ EBC_BXAP_PEN_DISABLED) diff --git a/include/configs/xilinx-ppc.h b/include/configs/xilinx-ppc.h index 2422c0b0c3..bd7bac0976 100644 --- a/include/configs/xilinx-ppc.h +++ b/include/configs/xilinx-ppc.h @@ -50,6 +50,7 @@ #undef CONFIG_CMD_DHCP #undef CONFIG_CMD_EEPROM #undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_NFS /*Misc*/ #define CONFIG_BOOTDELAY 5/* autoboot after 5 seconds */ diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c index 7f44f38dab..c508670a7c 100644 --- a/post/cpu/ppc4xx/ether.c +++ b/post/cpu/ppc4xx/ether.c @@ -34,7 +34,10 @@ * are transmitted. The configurable test parameters are: * MIN_PACKET_LENGTH - minimum size of packet to transmit * MAX_PACKET_LENGTH - maximum size of packet to transmit - * TEST_NUM - number of tests + * CONFIG_SYS_POST_ETH_LOOPS - Number of test loops. Each loop + * is tested with a different frame length. Starting with + * MAX_PACKET_LENGTH and going down to MIN_PACKET_LENGTH. + * Defaults to 10 and can be overriden in the board config header. */ #include <post.h> @@ -77,8 +80,12 @@ DECLARE_GLOBAL_DATA_PTR; #endif #define MIN_PACKET_LENGTH 64 -#define MAX_PACKET_LENGTH 256 -#define TEST_NUM 1 +#define MAX_PACKET_LENGTH 1514 +#ifndef CONFIG_SYS_POST_ETH_LOOPS +#define CONFIG_SYS_POST_ETH_LOOPS 10 +#endif +#define PACKET_INCR ((MAX_PACKET_LENGTH - MIN_PACKET_LENGTH) / \ + CONFIG_SYS_POST_ETH_LOOPS) static volatile mal_desc_t tx __cacheline_aligned; static volatile mal_desc_t rx __cacheline_aligned; @@ -361,29 +368,27 @@ static int packet_check (char *packet, int length) return 0; } + char packet_send[MAX_PACKET_LENGTH]; + char packet_recv[MAX_PACKET_LENGTH]; static int test_ctlr (int devnum, int hw_addr) { int res = -1; - char packet_send[MAX_PACKET_LENGTH]; - char packet_recv[MAX_PACKET_LENGTH]; int length; - int i; int l; ether_post_init (devnum, hw_addr); - for (i = 0; i < TEST_NUM; i++) { - for (l = MIN_PACKET_LENGTH; l <= MAX_PACKET_LENGTH; l++) { - packet_fill (packet_send, l); + for (l = MAX_PACKET_LENGTH; l >= MIN_PACKET_LENGTH; + l -= PACKET_INCR) { + packet_fill (packet_send, l); - ether_post_send (devnum, hw_addr, packet_send, l); + ether_post_send (devnum, hw_addr, packet_send, l); - length = ether_post_recv (devnum, hw_addr, packet_recv, - sizeof (packet_recv)); + length = ether_post_recv (devnum, hw_addr, packet_recv, + sizeof (packet_recv)); - if (length != l || packet_check (packet_recv, length) < 0) { - goto Done; - } + if (length != l || packet_check (packet_recv, length) < 0) { + goto Done; } } |
