diff options
850 files changed, 35130 insertions, 16936 deletions
diff --git a/.checkpatch.conf b/.checkpatch.conf index 977db9edbb..38386b354d 100644 --- a/.checkpatch.conf +++ b/.checkpatch.conf @@ -12,3 +12,6 @@ # For min/max --ignore MINMAX + +# enable more tests +--strict diff --git a/.gitignore b/.gitignore index e40eb7b669..be09894a0b 100644 --- a/.gitignore +++ b/.gitignore @@ -44,7 +44,6 @@ /u-boot.dtb /u-boot.sb /u-boot.geany -/include/u-boot.lst # # Generated files diff --git a/MAINTAINERS b/MAINTAINERS index f6723efc84..646997327e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -150,9 +150,6 @@ Wolfgang Denk <wd@denx.de> P3G4 MPC7410 - PCIPPC2 MPC750 - PCIPPC6 MPC750 - Phil Edworthy <phil.edworthy@renesas.com> rsk7264 SH7264 @@ -234,6 +231,7 @@ Wolfgang Grandegger <wg@denx.de> Anatolij Gustschin <agust@denx.de> + ac14xx MPC5121e O2D MPC5200 O2D300 MPC5200 O2DNT2 MPC5200 @@ -397,6 +395,7 @@ Ricardo Ribalda <ricardo.ribalda@uam.es> Stefan Roese <sr@denx.de> a3m071 MPC5200 + a4m2k MPC5200 P3M7448 MPC7448 @@ -607,6 +606,7 @@ Enric Balletbo i Serra <eballetbo@iseebcn.com> igep0020 ARM ARMV7 (OMAP3xx SoC) igep0030 ARM ARMV7 (OMAP3xx SoC) + igep0032 ARM ARMV7 (OMAP3xx SoC) Eric Benard <eric@eukrea.com> @@ -833,6 +833,10 @@ Stelian Pop <stelian@popies.net> at91sam9263ek ARM926EJS (AT91SAM9263 SoC) at91sam9rlek ARM926EJS (AT91SAM9RL SoC) +Matt Porter <mporter@ti.com> + + ti814x_evm ARM ARMV7 (TI814x Soc) + Dave Purdy <david.c.purdy@gmail.com> pogo_e02 ARM926EJS (Kirkwood SoC) @@ -979,6 +983,8 @@ Tom Warren <twarren@nvidia.com> harmony Tegra20 (ARM7 & A9 Dual Core) seaboard Tegra20 (ARM7 & A9 Dual Core) + cardhu Tegra30 (ARM7 & A9 Quad Core) + dalmore Tegra114 (ARM7 & A15 Quad Core) Tom Warren <twarren@nvidia.com> Stephen Warren <swarren@nvidia.com> @@ -1040,6 +1046,14 @@ Pali Rohár <pali.rohar@gmail.com> nokia_rx51 ARM ARMV7 (OMAP34xx SoC) +Eric Nelson <eric.nelson@boundarydevices.com> + nitrogen6dl i.MX6DL 1GB + nitrogen6dl2g i.MX6DL 2GB + nitrogen6q i.MX6Q/6D 1GB + nitrogen6q2g i.MX6Q/6D 2GB + nitrogen6s i.MX6S 512MB + nitrogen6s1g i.MX6S 1GB + ------------------------------------------------------------------------- Unknown / orphaned boards: @@ -1230,7 +1244,7 @@ Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> # Board CPU # ######################################################################### -Mike Frysinger <vapier@gentoo.org> +Sonic Zhang <sonic.adi@gmail.com> Blackfin Team <u-boot-devel@blackfin.uclinux.org> BF506F-EZKIT BF506 @@ -1247,6 +1261,7 @@ Blackfin Team <u-boot-devel@blackfin.uclinux.org> BF538F-EZKIT BF538 BF548-EZKIT BF548 BF561-EZKIT BF561 + BF609-EZKIT BF609 M.Hasewinkel (MHA) <info@ssv-embedded.de> @@ -35,6 +35,9 @@ usage() Environment variables: BUILD_NCPUS number of parallel make jobs (default: auto) CROSS_COMPILE cross-compiler toolchain prefix (default: "") + CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for + architecture "ARCH". Substitute "ARCH" for any + supported architecture (default: "") MAKEALL_LOGDIR output all logs to here (default: ./LOG/) BUILD_DIR output build directory (default: ./) BUILD_NBUILDS number of parallel targets (default: 1) @@ -180,13 +183,6 @@ else JOBS="" fi - -if [ "${CROSS_COMPILE}" ] ; then - MAKE="make CROSS_COMPILE=${CROSS_COMPILE}" -else - MAKE=make -fi - if [ "${MAKEALL_LOGDIR}" ] ; then LOG_DIR=${MAKEALL_LOGDIR} else @@ -585,6 +581,18 @@ get_target_maintainers() { echo "$mail" } +get_target_arch() { + local target=$1 + + # Automatic mode + local line=`egrep -i "^[[:space:]]*${target}[[:space:]]" boards.cfg` + + if [ -z "${line}" ] ; then echo "" ; return ; fi + + set ${line} + echo "$2" +} + list_target() { if [ "$PRINT_MAINTS" != 'y' ] ; then echo "$1" @@ -655,6 +663,16 @@ build_target() { export BUILD_DIR="${output_dir}" + target_arch=$(get_target_arch ${target}) + eval cross_toolchain=\$CROSS_COMPILE_${target_arch^^} + if [ "${cross_toolchain}" ] ; then + MAKE="make CROSS_COMPILE=${cross_toolchain}" + elif [ "${CROSS_COMPILE}" ] ; then + MAKE="make CROSS_COMPILE=${CROSS_COMPILE}" + else + MAKE=make + fi + ${MAKE} distclean >/dev/null ${MAKE} -s ${target}_config @@ -784,8 +802,20 @@ build_targets() { #----------------------------------------------------------------------- kill_children() { - local pgid=`ps -p $$ --no-headers -o "%r" | tr -d ' '` - local children=`pgrep -g $pgid | grep -v $$ | grep -v $pgid` + local OS=$(uname -s) + local children="" + case "${OS}" in + "Darwin") + # Mac OS X is known to have BSD style ps + local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d") + children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d") + ;; + *) + # everything else tries the GNU style + local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ') + children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d") + ;; + esac kill $children 2> /dev/null wait $children 2> /dev/null @@ -22,9 +22,9 @@ # VERSION = 2013 -PATCHLEVEL = 01 +PATCHLEVEL = 04 SUBLEVEL = -EXTRAVERSION = +EXTRAVERSION = -rc1 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else @@ -264,6 +264,7 @@ LIBS-y += fs/libfs.o \ fs/fdos/libfdos.o \ fs/jffs2/libjffs2.o \ fs/reiserfs/libreiserfs.o \ + fs/sandbox/libsandboxfs.o \ fs/ubifs/libubifs.o \ fs/yaffs2/libyaffs2.o \ fs/zfs/libzfs.o @@ -330,7 +331,7 @@ LIBS-y += api/libapi.o LIBS-y += post/libpost.o LIBS-y += test/libtest.o -ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) +ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),) LIBS-y += $(CPUDIR)/omap-common/libomap-common.o endif @@ -463,8 +464,8 @@ $(obj)u-boot.img: $(obj)u-boot.bin sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ -d $< $@ -$(OBJTREE)/u-boot.imx : $(obj)u-boot.bin $(SUBDIR_TOOLS) depend - $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $@ +$(obj)u-boot.imx: $(obj)u-boot.bin depend + $(MAKE) -C $(SRCTREE)/arch/arm/imx-common $(OBJTREE)/u-boot.imx $(obj)u-boot.kwb: $(obj)u-boot.bin $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \ @@ -555,10 +556,8 @@ GEN_UBOOT = \ $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot else GEN_UBOOT = \ - UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ - sed -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\ cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \ - $$UNDEF_LST $(__OBJS) \ + $(__OBJS) \ --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ -Map u-boot.map -o u-boot endif @@ -591,11 +590,7 @@ $(SUBDIR_EXAMPLES): $(obj)u-boot $(LDSCRIPT): depend $(MAKE) -C $(dir $@) $(notdir $@) -# The following line expands into whole rule which generates u-boot.lst, -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS))) -$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst +$(obj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@ nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend @@ -831,7 +826,6 @@ clean: $(obj)board/matrix_vision/*/bootscript.img \ $(obj)board/voiceblue/eeprom \ $(obj)u-boot.lds \ - $(obj)include/u-boot.lst \ $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \ $(obj)arch/blackfin/cpu/init.{lds,elf} @rm -f $(obj)include/bmp_logo.h @@ -869,7 +863,7 @@ clobber: tidy @rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map} @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map} @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map} - @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst} + @rm -f $(obj)spl/u-boot-spl.lds @rm -f $(obj)MLO MLO.byteswap @rm -f $(obj)SPL @rm -f $(obj)tools/xway-swap-bytes @@ -485,6 +485,17 @@ The following options need to be configured: Thumb2 this flag will result in Thumb2 code generated by GCC. + CONFIG_ARM_ERRATA_716044 + CONFIG_ARM_ERRATA_742230 + CONFIG_ARM_ERRATA_743622 + CONFIG_ARM_ERRATA_751472 + + If set, the workarounds for these ARM errata are applied early + during U-Boot startup. Note that these options force the + workarounds to be applied; no CPU-type/version detection + exists, unlike the similar options in the Linux kernel. Do not + set these options unless they apply! + - Linux Kernel Interface: CONFIG_CLOCKS_IN_MHZ @@ -842,7 +853,8 @@ The following options need to be configured: CONFIG_CMD_I2C * I2C serial bus support CONFIG_CMD_IDE * IDE harddisk support CONFIG_CMD_IMI iminfo - CONFIG_CMD_IMLS List all found images + CONFIG_CMD_IMLS List all images found in NOR flash + CONFIG_CMD_IMLS_NAND List all images found in NAND flash CONFIG_CMD_IMMAP * IMMR dump support CONFIG_CMD_IMPORTENV * import an environment CONFIG_CMD_INI * import data from an ini file into the env @@ -859,7 +871,8 @@ The following options need to be configured: (requires CONFIG_CMD_MEMORY and CONFIG_MD5) CONFIG_CMD_MEMINFO * Display detailed memory information CONFIG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, - loop, loopw, mtest + loop, loopw + CONFIG_CMD_MEMTEST mtest CONFIG_CMD_MISC Misc functions like sleep etc CONFIG_CMD_MMC * MMC memory mapped support CONFIG_CMD_MII * MII utility commands @@ -876,6 +889,7 @@ The following options need to be configured: CONFIG_CMD_READ * Read raw data from partition CONFIG_CMD_REGINFO * Register dump CONFIG_CMD_RUN run command in env variable + CONFIG_CMD_SANDBOX * sb command to access sandbox features CONFIG_CMD_SAVES * save S record dump CONFIG_CMD_SCSI * SCSI Support CONFIG_CMD_SDRAM * print SDRAM configuration information @@ -1530,6 +1544,17 @@ CBFS (Coreboot Filesystem) support allows for a "silent" boot where a splash screen is loaded very quickly after power-on. + CONFIG_SPLASHIMAGE_GUARD + + If this option is set, then U-Boot will prevent the environment + variable "splashimage" from being set to a problematic address + (see README.displaying-bmps and README.arm-unaligned-accesses). + This option is useful for targets where, due to alignment + restrictions, an improperly aligned BMP image will cause a data + abort. If you think you will not have problems with unaligned + accesses (for example because your toolchain prevents them) + there is no need to set this option. + CONFIG_SPLASH_SCREEN_ALIGN If this option is set the splash image can be freely positioned @@ -1550,6 +1575,14 @@ CBFS (Coreboot Filesystem) support => vertically centered image at x = dspWidth - bmpWidth - 9 + CONFIG_SPLASH_SCREEN_PREPARE + + If this option is set then the board_splash_screen_prepare() + function, which must be defined in your code, is called as part + of the splash screen display sequence. It gives the board an + opportunity to prepare the splash image data before it is + processed and sent to the frame buffer by U-Boot. + - Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP If this option is set, additionally to standard BMP @@ -3209,6 +3242,23 @@ Configuration Settings: If defined, don't allow the -f switch to env set override variable access flags. +- CONFIG_SYS_GENERIC_BOARD + This selects the architecture-generic board system instead of the + architecture-specific board files. It is intended to move boards + to this new framework over time. Defining this will disable the + arch/foo/lib/board.c file and use common/board_f.c and + common/board_r.c instead. To use this option your architecture + must support it (i.e. must define __HAVE_ARCH_GENERIC_BOARD in + its config.mk file). If you find problems enabling this option on + your board please report the problem and send patches! + +- CONFIG_SYS_SYM_OFFSETS + This is set by architectures that use offsets for link symbols + instead of absolute values. So bss_start is obtained using an + offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than + directly. You should not need to touch this setting. + + The following definitions that deal with the placement and management of environment data (variable area); in general, we support the following configurations: @@ -3810,6 +3860,15 @@ Low Level (hardware related) configuration options: that is executed before the actual U-Boot. E.g. when compiling a NAND SPL. +- CONFIG_ARCH_MAP_SYSMEM + Generally U-Boot (and in particular the md command) uses + effective address. It is therefore not necessary to regard + U-Boot address as virtual addresses that need to be translated + to physical addresses. However, sandbox requires this, since + it maintains its own little RAM buffer which contains all + addressable memory. This option causes some memory accesses + to be mapped through map_sysmem() / unmap_sysmem(). + - CONFIG_USE_ARCH_MEMCPY CONFIG_USE_ARCH_MEMSET If these options are used a optimized version of memcpy/memset will @@ -3820,6 +3879,10 @@ Low Level (hardware related) configuration options: If defined, the x86 reset vector code is included. This is not needed when U-Boot is running from Coreboot. +- CONFIG_SYS_MPUCLK + Defines the MPU clock speed (in MHz). + + NOTE : currently only supported on AM335x platforms. Freescale QE/FMAN Firmware Support: ----------------------------------- diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 24b9d7c802..e7839beced 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -24,13 +24,16 @@ CROSS_COMPILE ?= arm-linux- ifndef CONFIG_STANDALONE_LOAD_ADDR -ifeq ($(SOC),omap3) +ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),) CONFIG_STANDALONE_LOAD_ADDR = 0x80300000 else CONFIG_STANDALONE_LOAD_ADDR = 0xc100000 endif endif +# Support generic board on ARM +__HAVE_ARCH_GENERIC_BOARD := y + PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__ # Choose between ARM/Thumb instruction sets diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c index d11e6f6270..46f4b64ff4 100644 --- a/arch/arm/cpu/arm1136/mx35/generic.c +++ b/arch/arm/cpu/arm1136/mx35/generic.c @@ -519,7 +519,7 @@ u32 spl_boot_device(void) case RCSR_MEM_TYPE_NOR: return BOOT_DEVICE_NOR; case RCSR_MEM_TYPE_ONENAND: - return BOOT_DEVICE_ONE_NAND; + return BOOT_DEVICE_ONENAND; default: return BOOT_DEVICE_NONE; } diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index a067b8a186..eba23248d5 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -106,7 +106,7 @@ _image_copy_end_ofs: .globl _bss_end_ofs _bss_end_ofs: - .word __bss_end__ - _start + .word __bss_end - _start .globl _end_ofs _end_ofs: diff --git a/arch/arm/cpu/arm1136/u-boot-spl.lds b/arch/arm/cpu/arm1136/u-boot-spl.lds index a0462ab97a..b09b4ebfaf 100644 --- a/arch/arm/cpu/arm1136/u-boot-spl.lds +++ b/arch/arm/cpu/arm1136/u-boot-spl.lds @@ -57,6 +57,6 @@ SECTIONS __bss_start = .; *(.bss*) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } >.sdram } diff --git a/arch/arm/cpu/arm1176/bcm2835/Makefile b/arch/arm/cpu/arm1176/bcm2835/Makefile index 95da6a822a..135de42d37 100644 --- a/arch/arm/cpu/arm1176/bcm2835/Makefile +++ b/arch/arm/cpu/arm1176/bcm2835/Makefile @@ -17,7 +17,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o SOBJS := lowlevel_init.o -COBJS := init.o reset.o timer.o +COBJS := init.o reset.o timer.o mbox.o SRCS := $(SOBJS:.o=.c) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/arm/cpu/arm1176/bcm2835/mbox.c b/arch/arm/cpu/arm1176/bcm2835/mbox.c new file mode 100644 index 0000000000..fd65e3387f --- /dev/null +++ b/arch/arm/cpu/arm1176/bcm2835/mbox.c @@ -0,0 +1,164 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mbox.h> + +#define TIMEOUT (100 * 1000) /* 100mS in uS */ + +int bcm2835_mbox_call_raw(u32 chan, u32 send, u32 *recv) +{ + struct bcm2835_mbox_regs *regs = + (struct bcm2835_mbox_regs *)BCM2835_MBOX_PHYSADDR; + ulong endtime = get_timer(0) + TIMEOUT; + u32 val; + + debug("time: %lu timeout: %lu\n", get_timer(0), endtime); + + if (send & BCM2835_CHAN_MASK) { + printf("mbox: Illegal mbox data 0x%08x\n", send); + return -1; + } + + /* Drain any stale responses */ + + for (;;) { + val = readl(®s->status); + if (val & BCM2835_MBOX_STATUS_RD_EMPTY) + break; + if (get_timer(0) >= endtime) { + printf("mbox: Timeout draining stale responses\n"); + return -1; + } + val = readl(®s->read); + } + + /* Wait for space to send */ + + for (;;) { + val = readl(®s->status); + if (!(val & BCM2835_MBOX_STATUS_WR_FULL)) + break; + if (get_timer(0) >= endtime) { + printf("mbox: Timeout waiting for send space\n"); + return -1; + } + } + + /* Send the request */ + + val = BCM2835_MBOX_PACK(chan, send); + debug("mbox: TX raw: 0x%08x\n", val); + writel(val, ®s->write); + + /* Wait for the response */ + + for (;;) { + val = readl(®s->status); + if (!(val & BCM2835_MBOX_STATUS_RD_EMPTY)) + break; + if (get_timer(0) >= endtime) { + printf("mbox: Timeout waiting for response\n"); + return -1; + } + } + + /* Read the response */ + + val = readl(®s->read); + debug("mbox: RX raw: 0x%08x\n", val); + + /* Validate the response */ + + if (BCM2835_MBOX_UNPACK_CHAN(val) != chan) { + printf("mbox: Response channel mismatch\n"); + return -1; + } + + *recv = BCM2835_MBOX_UNPACK_DATA(val); + + return 0; +} + +#ifdef DEBUG +void dump_buf(struct bcm2835_mbox_hdr *buffer) +{ + u32 *p; + u32 words; + int i; + + p = (u32 *)buffer; + words = buffer->buf_size / 4; + for (i = 0; i < words; i++) + printf(" 0x%04x: 0x%08x\n", i * 4, p[i]); +} +#endif + +int bcm2835_mbox_call_prop(u32 chan, struct bcm2835_mbox_hdr *buffer) +{ + int ret; + u32 rbuffer; + struct bcm2835_mbox_tag_hdr *tag; + int tag_index; + +#ifdef DEBUG + printf("mbox: TX buffer\n"); + dump_buf(buffer); +#endif + + ret = bcm2835_mbox_call_raw(chan, (u32)buffer, &rbuffer); + if (ret) + return ret; + if (rbuffer != (u32)buffer) { + printf("mbox: Response buffer mismatch\n"); + return -1; + } + +#ifdef DEBUG + printf("mbox: RX buffer\n"); + dump_buf(buffer); +#endif + + /* Validate overall response status */ + + if (buffer->code != BCM2835_MBOX_RESP_CODE_SUCCESS) { + printf("mbox: Header response code invalid\n"); + return -1; + } + + /* Validate each tag's response status */ + + tag = (void *)(buffer + 1); + tag_index = 0; + while (tag->tag) { + if (!(tag->val_len & BCM2835_MBOX_TAG_VAL_LEN_RESPONSE)) { + printf("mbox: Tag %d missing val_len response bit\n", + tag_index); + return -1; + } + /* + * Clear the reponse bit so clients can just look right at the + * length field without extra processing + */ + tag->val_len &= ~BCM2835_MBOX_TAG_VAL_LEN_RESPONSE; + tag = (void *)(((u8 *)tag) + sizeof(*tag) + tag->val_buf_size); + tag_index++; + } + + return 0; +} diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S index 40df4b1614..3c291fbe42 100644 --- a/arch/arm/cpu/arm1176/start.S +++ b/arch/arm/cpu/arm1176/start.S @@ -121,7 +121,7 @@ _bss_start_ofs: .globl _bss_end_ofs _bss_end_ofs: - .word __bss_end__ - _start + .word __bss_end - _start .globl _end_ofs _end_ofs: diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 771d3869c1..43bd6edd28 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -103,7 +103,7 @@ _bss_start_ofs: .globl _bss_end_ofs _bss_end_ofs: - .word __bss_end__ - _start + .word __bss_end - _start .globl _end_ofs _end_ofs: diff --git a/arch/arm/cpu/arm720t/tegra114/cpu.c b/arch/arm/cpu/arm720t/tegra114/cpu.c index 5962e15b4f..6a94179d4a 100644 --- a/arch/arm/cpu/arm720t/tegra114/cpu.c +++ b/arch/arm/cpu/arm720t/tegra114/cpu.c @@ -201,6 +201,7 @@ void t114_init_clocks(void) reset_set_enable(PERIPH_ID_MSELECT, 0); reset_set_enable(PERIPH_ID_EMC1, 0); reset_set_enable(PERIPH_ID_MC1, 0); + reset_set_enable(PERIPH_ID_DVFS, 0); debug("t114_init_clocks exit\n"); } @@ -269,6 +270,8 @@ void powerup_cpus(void) void start_cpu(u32 reset_vector) { + u32 imme, inst; + debug("start_cpu entry, reset_vector = %x\n", reset_vector); t114_init_clocks(); @@ -285,12 +288,38 @@ void start_cpu(u32 reset_vector) /* Take CPU(s) out of reset */ remove_cpu_resets(); + /* Set the entry point for CPU execution from reset */ + /* - * Set the entry point for CPU execution from reset, - * if it's a non-zero value. + * A01P with patched boot ROM; vector hard-coded to 0x4003fffc. + * See nvbug 1193357 for details. */ - if (reset_vector) - writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR); + + /* mov r0, #lsb(reset_vector) */ + imme = reset_vector & 0xffff; + inst = imme & 0xfff; + inst |= ((imme >> 12) << 16); + inst |= 0xe3000000; + writel(inst, 0x4003fff0); + + /* movt r0, #msb(reset_vector) */ + imme = (reset_vector >> 16) & 0xffff; + inst = imme & 0xfff; + inst |= ((imme >> 12) << 16); + inst |= 0xe3400000; + writel(inst, 0x4003fff4); + + /* bx r0 */ + writel(0xe12fff10, 0x4003fff8); + + /* b -12 */ + imme = (u32)-20; + inst = (imme >> 2) & 0xffffff; + inst |= 0xea000000; + writel(inst, 0x4003fffc); + + /* Write to orignal location for compatibility */ + writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR); /* If the CPU(s) don't already have power, power 'em up */ powerup_cpus(); diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds index 008ae891ca..e483820f3f 100644 --- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds +++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds @@ -51,13 +51,13 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); __bss_start = .; .bss : { *(.bss) } - __bss_end__ = .; + __bss_end = .; _end = .; } diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 511d21d334..2864d128c7 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -87,7 +87,7 @@ _bss_start_ofs: .globl _bss_end_ofs _bss_end_ofs: - .word __bss_end__ - _start + .word __bss_end - _start .globl _end_ofs _end_ofs: diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S index e8d6d71c17..827fee2492 100644 --- a/arch/arm/cpu/arm925t/start.S +++ b/arch/arm/cpu/arm925t/start.S @@ -93,7 +93,7 @@ _bss_start_ofs: .globl _bss_end_ofs _bss_end_ofs: - .word __bss_end__ - _start + .word __bss_end - _start .globl _end_ofs _end_ofs: diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c index 0448c0b133..92185460a1 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c @@ -61,20 +61,20 @@ char *get_cpu_name() if (cpu_is_at91sam9x5()) { switch (extension_id) { case ARCH_EXID_AT91SAM9G15: - return CONFIG_SYS_AT91_G15_CPU_NAME; + return "AT91SAM9G15"; case ARCH_EXID_AT91SAM9G25: - return CONFIG_SYS_AT91_G25_CPU_NAME; + return "AT91SAM9G25"; case ARCH_EXID_AT91SAM9G35: - return CONFIG_SYS_AT91_G35_CPU_NAME; + return "AT91SAM9G35"; case ARCH_EXID_AT91SAM9X25: - return CONFIG_SYS_AT91_X25_CPU_NAME; + return "AT91SAM9X25"; case ARCH_EXID_AT91SAM9X35: - return CONFIG_SYS_AT91_X35_CPU_NAME; + return "AT91SAM9X35"; default: - return CONFIG_SYS_AT91_UNKNOWN_CPU; + return "Unknown CPU type"; } } else { - return CONFIG_SYS_AT91_UNKNOWN_CPU; + return "Unknown CPU type"; } } @@ -246,14 +246,14 @@ void at91_macb_hw_init(void) #ifndef CONFIG_RMII /* Only emac0 support MII */ if (has_emac0()) { - at91_set_b_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */ - at91_set_b_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */ - at91_set_b_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */ - at91_set_b_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */ - at91_set_b_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */ - at91_set_b_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */ - at91_set_b_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */ - at91_set_b_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */ + at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* ECRS */ + at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* ECOL */ + at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ERX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* ERX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* ERXCK */ + at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* ETX2 */ + at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX3 */ + at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ETXER */ } #endif } diff --git a/arch/arm/cpu/arm926ejs/config.mk b/arch/arm/cpu/arm926ejs/config.mk index 47f24f580e..6a3a1bb354 100644 --- a/arch/arm/cpu/arm926ejs/config.mk +++ b/arch/arm/cpu/arm926ejs/config.mk @@ -34,6 +34,6 @@ PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) ifneq ($(CONFIG_IMX_CONFIG),) -ALL-y += $(OBJTREE)/u-boot.imx +ALL-y += $(obj)u-boot.imx endif diff --git a/arch/arm/cpu/arm926ejs/davinci/misc.c b/arch/arm/cpu/arm926ejs/davinci/misc.c index c310c69ad4..162c1e0ff4 100644 --- a/arch/arm/cpu/arm926ejs/davinci/misc.c +++ b/arch/arm/cpu/arm926ejs/davinci/misc.c @@ -104,7 +104,7 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr) int ret; ret = eth_getenv_enetaddr_by_index("eth", 0, env_enetaddr); - if (ret) { + if (!ret) { /* * There is no MAC address in the environment, so we * initialize it from the value in the EEPROM. @@ -115,7 +115,7 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr) ret = !eth_setenv_enetaddr("ethaddr", rom_enetaddr); } if (!ret) - printf("Failed to set mac address from EEPROM\n"); + printf("Failed to set mac address from EEPROM: %d\n", ret); } #endif /* CONFIG_DRIVER_TI_EMAC */ diff --git a/arch/arm/cpu/arm926ejs/davinci/spl.c b/arch/arm/cpu/arm926ejs/davinci/spl.c index 714fa92846..ca8a412626 100644 --- a/arch/arm/cpu/arm926ejs/davinci/spl.c +++ b/arch/arm/cpu/arm926ejs/davinci/spl.c @@ -64,7 +64,7 @@ void board_init_f(ulong dummy) #endif /* Third, we clear the BSS. */ - memset(__bss_start, 0, __bss_end__ - __bss_start); + memset(__bss_start, 0, __bss_end - __bss_start); /* Finally, setup gd and move to the next step. */ gd = &gdata; diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c index 00b9aba457..43e766334c 100644 --- a/arch/arm/cpu/arm926ejs/mxs/clock.c +++ b/arch/arm/cpu/arm926ejs/mxs/clock.c @@ -289,7 +289,8 @@ static uint32_t mxs_get_sspclk(enum mxs_sspclock ssp) void mxs_set_ssp_busclock(unsigned int bus, uint32_t freq) { struct mxs_ssp_regs *ssp_regs; - const uint32_t sspclk = mxs_get_sspclk(bus); + const enum mxs_sspclock clk = mxs_ssp_clock_by_bus(bus); + const uint32_t sspclk = mxs_get_sspclk(clk); uint32_t reg; uint32_t divide, rate, tgtclk; diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs_init.h b/arch/arm/cpu/arm926ejs/mxs/mxs_init.h index 2ddc5bc0c6..084def5b12 100644 --- a/arch/arm/cpu/arm926ejs/mxs/mxs_init.h +++ b/arch/arm/cpu/arm926ejs/mxs/mxs_init.h @@ -30,7 +30,7 @@ void early_delay(int delay); void mxs_power_init(void); -#ifdef CONFIG_SPL_MX28_PSWITCH_WAIT +#ifdef CONFIG_SPL_MXS_PSWITCH_WAIT void mxs_power_wait_pswitch(void); #else static inline void mxs_power_wait_pswitch(void) { } diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c index f8392f6398..fdac73cfaa 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c @@ -27,6 +27,7 @@ #include <config.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> #include <linux/compiler.h> #include "mxs_init.h" @@ -119,6 +120,10 @@ static void initialize_dram_values(void) writel(dram_vals[i], MXS_DRAM_BASE + (4 * i)); #ifdef CONFIG_MX23 + /* + * Enable tRAS lockout in HW_DRAM_CTL08 ; it must be the last + * element to be set + */ writel((1 << 24), MXS_DRAM_BASE + (4 * 8)); #endif } @@ -229,7 +234,7 @@ static void mx23_mem_setup_vddmem(void) struct mxs_power_regs *power_regs = (struct mxs_power_regs *)MXS_POWER_BASE; - writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) | + writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) | POWER_VDDMEMCTRL_ENABLE_ILIMIT | POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_PULLDOWN_ACTIVE, @@ -237,13 +242,20 @@ static void mx23_mem_setup_vddmem(void) early_delay(10000); - writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) | + writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) | POWER_VDDMEMCTRL_ENABLE_LINREG, &power_regs->hw_power_vddmemctrl); } static void mx23_mem_init(void) { + /* + * Reset/ungate the EMI block. This is essential, otherwise the system + * suffers from memory instability. This thing is mx23 specific and is + * no longer present on mx28. + */ + mxs_reset_block((struct mxs_register_32 *)MXS_EMI_BASE); + mx23_mem_setup_vddmem(); /* diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index e9d6302b7a..287c698ff7 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -921,7 +921,7 @@ void mxs_power_init(void) early_delay(1000); } -#ifdef CONFIG_SPL_MX28_PSWITCH_WAIT +#ifdef CONFIG_SPL_MXS_PSWITCH_WAIT void mxs_power_wait_pswitch(void) { struct mxs_power_regs *power_regs = diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S index 7ccd337174..373e6d8d7c 100644 --- a/arch/arm/cpu/arm926ejs/mxs/start.S +++ b/arch/arm/cpu/arm926ejs/mxs/start.S @@ -133,7 +133,7 @@ _bss_start_ofs: .globl _bss_end_ofs _bss_end_ofs: - .word __bss_end__ - _start + .word __bss_end - _start .globl _end_ofs _end_ofs: diff --git a/arch/arm/cpu/arm926ejs/mxs/timer.c b/arch/arm/cpu/arm926ejs/mxs/timer.c index 373841180f..2039106e40 100644 --- a/arch/arm/cpu/arm926ejs/mxs/timer.c +++ b/arch/arm/cpu/arm926ejs/mxs/timer.c @@ -32,7 +32,11 @@ #include <asm/arch/sys_proto.h> /* Maximum fixed count */ -#define TIMER_LOAD_VAL 0xffffffff +#if defined(CONFIG_MX23) +#define TIMER_LOAD_VAL 0xffff +#elif defined(CONFIG_MX28) +#define TIMER_LOAD_VAL 0xffffffff +#endif DECLARE_GLOBAL_DATA_PTR; @@ -42,22 +46,22 @@ DECLARE_GLOBAL_DATA_PTR; /* * This driver uses 1kHz clock source. */ -#define MX28_INCREMENTER_HZ 1000 +#define MXS_INCREMENTER_HZ 1000 static inline unsigned long tick_to_time(unsigned long tick) { - return tick / (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ); + return tick / (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ); } static inline unsigned long time_to_tick(unsigned long time) { - return time * (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ); + return time * (MXS_INCREMENTER_HZ / CONFIG_SYS_HZ); } /* Calculate how many ticks happen in "us" microseconds */ static inline unsigned long us_to_tick(unsigned long us) { - return (us * MX28_INCREMENTER_HZ) / 1000000; + return (us * MXS_INCREMENTER_HZ) / 1000000; } int timer_init(void) @@ -69,7 +73,11 @@ int timer_init(void) mxs_reset_block(&timrot_regs->hw_timrot_rotctrl_reg); /* Set fixed_count to 0 */ +#if defined(CONFIG_MX23) + writel(0, &timrot_regs->hw_timrot_timcount0); +#elif defined(CONFIG_MX28) writel(0, &timrot_regs->hw_timrot_fixed_count0); +#endif /* Set UPDATE bit and 1Khz frequency */ writel(TIMROT_TIMCTRLn_UPDATE | TIMROT_TIMCTRLn_RELOAD | @@ -77,7 +85,11 @@ int timer_init(void) &timrot_regs->hw_timrot_timctrl0); /* Set fixed_count to maximal value */ +#if defined(CONFIG_MX23) + writel(TIMER_LOAD_VAL - 1, &timrot_regs->hw_timrot_timcount0); +#elif defined(CONFIG_MX28) writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0); +#endif return 0; } @@ -86,9 +98,16 @@ unsigned long long get_ticks(void) { struct mxs_timrot_regs *timrot_regs = (struct mxs_timrot_regs *)MXS_TIMROT_BASE; + uint32_t now; /* Current tick value */ - uint32_t now = readl(&timrot_regs->hw_timrot_running_count0); +#if defined(CONFIG_MX23) + /* Upper bits are the valid ones. */ + now = readl(&timrot_regs->hw_timrot_timcount0) >> + TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET; +#elif defined(CONFIG_MX28) + now = readl(&timrot_regs->hw_timrot_running_count0); +#endif if (lastdec >= now) { /* @@ -117,17 +136,17 @@ ulong get_timer(ulong base) } /* We use the HW_DIGCTL_MICROSECONDS register for sub-millisecond timer. */ -#define MX28_HW_DIGCTL_MICROSECONDS 0x8001c0c0 +#define MXS_HW_DIGCTL_MICROSECONDS 0x8001c0c0 void __udelay(unsigned long usec) { uint32_t old, new, incr; uint32_t counter = 0; - old = readl(MX28_HW_DIGCTL_MICROSECONDS); + old = readl(MXS_HW_DIGCTL_MICROSECONDS); while (counter < usec) { - new = readl(MX28_HW_DIGCTL_MICROSECONDS); + new = readl(MXS_HW_DIGCTL_MICROSECONDS); /* Check if the timer wrapped. */ if (new < old) { @@ -152,5 +171,5 @@ void __udelay(unsigned long usec) ulong get_tbclk(void) { - return MX28_INCREMENTER_HZ; + return MXS_INCREMENTER_HZ; } diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds index 6dc681a313..67b204e447 100644 --- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds @@ -51,12 +51,6 @@ SECTIONS . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - . = ALIGN(4); - .rel.dyn : { __rel_dyn_start = .; *(.rel*) @@ -73,7 +67,7 @@ SECTIONS __bss_start = .; *(.bss*) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } _end = .; diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds index f3bd5e7367..7405917595 100644 --- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds @@ -51,12 +51,6 @@ SECTIONS . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - . = ALIGN(4); - .rel.dyn : { __rel_dyn_start = .; *(.rel*) @@ -73,7 +67,7 @@ SECTIONS __bss_start = .; *(.bss*) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } _end = .; diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S index 66a8b654bd..f5d15828d3 100644 --- a/arch/arm/cpu/arm926ejs/start.S +++ b/arch/arm/cpu/arm926ejs/start.S @@ -142,7 +142,7 @@ _bss_start_ofs: .globl _bss_end_ofs _bss_end_ofs: - .word __bss_end__ - _start + .word __bss_end - _start .globl _end_ofs _end_ofs: @@ -151,7 +151,7 @@ _end_ofs: #ifdef CONFIG_NAND_U_BOOT .globl _end _end: - .word __bss_end__ + .word __bss_end #endif #ifdef CONFIG_USE_IRQ diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S index a7a98a4e58..9dec35b557 100644 --- a/arch/arm/cpu/arm946es/start.S +++ b/arch/arm/cpu/arm946es/start.S @@ -103,7 +103,7 @@ _bss_start_ofs: .globl _bss_end_ofs _bss_end_ofs: - .word __bss_end__ - _start + .word __bss_end - _start .globl _end_ofs _end_ofs: diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S index c189849fa8..04d08458f3 100644 --- a/arch/arm/cpu/arm_intcm/start.S +++ b/arch/arm/cpu/arm_intcm/start.S @@ -99,7 +99,7 @@ _bss_start_ofs: .globl _bss_end_ofs _bss_end_ofs: - .word __bss_end__ - _start + .word __bss_end - _start .globl _end_ofs _end_ofs: diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index ee8c2b3fa5..7a8c2d0e59 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -32,7 +32,7 @@ COBJS += cache_v7.o COBJS += cpu.o COBJS += syslib.o -ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA),) +ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA)$(CONFIG_MX6)$(CONFIG_TI814X),) SOBJS += lowlevel_init.o endif diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index 70c443edbb..c97e30d441 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -16,7 +16,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS += clock.o +COBJS-$(CONFIG_AM33XX) += clock_am33xx.o +COBJS-$(CONFIG_TI814X) += clock_ti814x.o COBJS += sys_info.o COBJS += mem.o COBJS += ddr.o diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index ab313265d0..885fb2d20e 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -56,11 +56,11 @@ int cpu_mmc_init(bd_t *bis) { int ret; - ret = omap_mmc_init(0, 0, 0); + ret = omap_mmc_init(0, 0, 0, -1, -1); if (ret) return ret; - return omap_mmc_init(1, 0, 0); + return omap_mmc_init(1, 0, 0, -1, -1); } #endif @@ -141,11 +141,11 @@ int arch_misc_init(void) { #ifdef CONFIG_AM335X_USB0 musb_register(&otg0_plat, &otg0_board_data, - (void *)AM335X_USB0_OTG_BASE); + (void *)USB0_OTG_BASE); #endif #ifdef CONFIG_AM335X_USB1 musb_register(&otg1_plat, &otg1_board_data, - (void *)AM335X_USB1_OTG_BASE); + (void *)USB1_OTG_BASE); #endif return 0; } diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c index d7d98d1111..afc0d92059 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c @@ -1,9 +1,9 @@ /* - * clock.c + * clock_am33xx.c * * clocks for AM33XX based boards * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -42,6 +42,35 @@ #define CPGMAC0_IDLE 0x30000 #define DPLL_CLKDCOLDO_GATE_CTRL 0x300 +#define OSC (V_OSCK/1000000) + +#define MPUPLL_M CONFIG_SYS_MPUCLK +#define MPUPLL_N (OSC-1) +#define MPUPLL_M2 1 + +/* Core PLL Fdll = 1 GHZ, */ +#define COREPLL_M 1000 +#define COREPLL_N (OSC-1) + +#define COREPLL_M4 10 /* CORE_CLKOUTM4 = 200 MHZ */ +#define COREPLL_M5 8 /* CORE_CLKOUTM5 = 250 MHZ */ +#define COREPLL_M6 4 /* CORE_CLKOUTM6 = 500 MHZ */ + +/* + * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll + * frequency needs to be set to 960 MHZ. Hence, + * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below + */ +#define PERPLL_M 960 +#define PERPLL_N (OSC-1) +#define PERPLL_M2 5 + +/* DDR Freq is 266 MHZ for now */ +/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */ +#define DDRPLL_M 266 +#define DDRPLL_N (OSC-1) +#define DDRPLL_M2 1 + const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c new file mode 100644 index 0000000000..cb4210f6e6 --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c @@ -0,0 +1,406 @@ +/* + * clock_ti814x.c + * + * Clocks for TI814X based boards + * + * Copyright (C) 2013, Texas Instruments, Incorporated + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/clock.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> + +/* PRCM */ +#define PRCM_MOD_EN 0x2 + +/* CLK_SRC */ +#define OSC_SRC0 0 +#define OSC_SRC1 1 + +#define L3_OSC_SRC OSC_SRC0 + +#define OSC_0_FREQ 20 + +#define DCO_HS2_MIN 500 +#define DCO_HS2_MAX 1000 +#define DCO_HS1_MIN 1000 +#define DCO_HS1_MAX 2000 + +#define SELFREQDCO_HS2 0x00000801 +#define SELFREQDCO_HS1 0x00001001 + +#define MPU_N 0x1 +#define MPU_M 0x3C +#define MPU_M2 1 +#define MPU_CLKCTRL 0x1 + +#define L3_N 19 +#define L3_M 880 +#define L3_M2 4 +#define L3_CLKCTRL 0x801 + +#define DDR_N 19 +#define DDR_M 666 +#define DDR_M2 2 +#define DDR_CLKCTRL 0x801 + +/* ADPLLJ register values */ +#define ADPLLJ_CLKCTRL_HS2 0x00000801 /* HS2 mode, TINT2 = 1 */ +#define ADPLLJ_CLKCTRL_HS1 0x00001001 /* HS1 mode, TINT2 = 1 */ +#define ADPLLJ_CLKCTRL_CLKDCOLDOEN (1 << 29) +#define ADPLLJ_CLKCTRL_IDLE (1 << 23) +#define ADPLLJ_CLKCTRL_CLKOUTEN (1 << 20) +#define ADPLLJ_CLKCTRL_CLKOUTLDOEN (1 << 19) +#define ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ (1 << 17) +#define ADPLLJ_CLKCTRL_LPMODE (1 << 12) +#define ADPLLJ_CLKCTRL_DRIFTGUARDIAN (1 << 11) +#define ADPLLJ_CLKCTRL_REGM4XEN (1 << 10) +#define ADPLLJ_CLKCTRL_TINITZ (1 << 0) +#define ADPLLJ_CLKCTRL_CLKDCO (ADPLLJ_CLKCTRL_CLKDCOLDOEN | \ + ADPLLJ_CLKCTRL_CLKOUTEN | \ + ADPLLJ_CLKCTRL_CLKOUTLDOEN | \ + ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ) + +#define ADPLLJ_STATUS_PHASELOCK (1 << 10) +#define ADPLLJ_STATUS_FREQLOCK (1 << 9) +#define ADPLLJ_STATUS_PHSFRQLOCK (ADPLLJ_STATUS_PHASELOCK | \ + ADPLLJ_STATUS_FREQLOCK) +#define ADPLLJ_STATUS_BYPASSACK (1 << 8) +#define ADPLLJ_STATUS_BYPASS (1 << 0) +#define ADPLLJ_STATUS_BYPASSANDACK (ADPLLJ_STATUS_BYPASSACK | \ + ADPLLJ_STATUS_BYPASS) + +#define ADPLLJ_TENABLE_ENB (1 << 0) +#define ADPLLJ_TENABLEDIV_ENB (1 << 0) + +#define ADPLLJ_M2NDIV_M2SHIFT 16 + +#define MPU_PLL_BASE (PLL_SUBSYS_BASE + 0x048) +#define L3_PLL_BASE (PLL_SUBSYS_BASE + 0x110) +#define DDR_PLL_BASE (PLL_SUBSYS_BASE + 0x290) + +struct ad_pll { + unsigned int pwrctrl; + unsigned int clkctrl; + unsigned int tenable; + unsigned int tenablediv; + unsigned int m2ndiv; + unsigned int mn2div; + unsigned int fracdiv; + unsigned int bwctrl; + unsigned int fracctrl; + unsigned int status; + unsigned int m3div; + unsigned int rampctrl; +}; + +#define OSC_SRC_CTRL (PLL_SUBSYS_BASE + 0x2C0) + +/* PRCM */ +#define CM_DEFAULT_BASE (PRCM_BASE + 0x0500) + +struct cm_def { + unsigned int resv0[2]; + unsigned int l3fastclkstctrl; + unsigned int resv1[1]; + unsigned int pciclkstctrl; + unsigned int resv2[1]; + unsigned int ducaticlkstctrl; + unsigned int resv3[1]; + unsigned int emif0clkctrl; + unsigned int emif1clkctrl; + unsigned int dmmclkctrl; + unsigned int fwclkctrl; + unsigned int resv4[10]; + unsigned int usbclkctrl; + unsigned int resv5[1]; + unsigned int sataclkctrl; + unsigned int resv6[4]; + unsigned int ducaticlkctrl; + unsigned int pciclkctrl; +}; + +#define CM_ALWON_BASE (PRCM_BASE + 0x1400) + +struct cm_alwon { + unsigned int l3slowclkstctrl; + unsigned int ethclkstctrl; + unsigned int l3medclkstctrl; + unsigned int mmu_clkstctrl; + unsigned int mmucfg_clkstctrl; + unsigned int ocmc0clkstctrl; + unsigned int vcpclkstctrl; + unsigned int mpuclkstctrl; + unsigned int sysclk4clkstctrl; + unsigned int sysclk5clkstctrl; + unsigned int sysclk6clkstctrl; + unsigned int rtcclkstctrl; + unsigned int l3fastclkstctrl; + unsigned int resv0[67]; + unsigned int mcasp0clkctrl; + unsigned int mcasp1clkctrl; + unsigned int mcasp2clkctrl; + unsigned int mcbspclkctrl; + unsigned int uart0clkctrl; + unsigned int uart1clkctrl; + unsigned int uart2clkctrl; + unsigned int gpio0clkctrl; + unsigned int gpio1clkctrl; + unsigned int i2c0clkctrl; + unsigned int i2c1clkctrl; + unsigned int mcasp345clkctrl; + unsigned int atlclkctrl; + unsigned int mlbclkctrl; + unsigned int pataclkctrl; + unsigned int resv1[1]; + unsigned int uart3clkctrl; + unsigned int uart4clkctrl; + unsigned int uart5clkctrl; + unsigned int wdtimerclkctrl; + unsigned int spiclkctrl; + unsigned int mailboxclkctrl; + unsigned int spinboxclkctrl; + unsigned int mmudataclkctrl; + unsigned int resv2[2]; + unsigned int mmucfgclkctrl; + unsigned int resv3[2]; + unsigned int ocmc0clkctrl; + unsigned int vcpclkctrl; + unsigned int resv4[2]; + unsigned int controlclkctrl; + unsigned int resv5[2]; + unsigned int gpmcclkctrl; + unsigned int ethernet0clkctrl; + unsigned int resv6[1]; + unsigned int mpuclkctrl; + unsigned int debugssclkctrl; + unsigned int l3clkctrl; + unsigned int l4hsclkctrl; + unsigned int l4lsclkctrl; + unsigned int rtcclkctrl; + unsigned int tpccclkctrl; + unsigned int tptc0clkctrl; + unsigned int tptc1clkctrl; + unsigned int tptc2clkctrl; + unsigned int tptc3clkctrl; + unsigned int resv7[4]; + unsigned int dcan01clkctrl; + unsigned int mmchs0clkctrl; + unsigned int mmchs1clkctrl; + unsigned int mmchs2clkctrl; + unsigned int custefuseclkctrl; +}; + + +const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE; +const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE; + +/* + * Enable the peripheral clock for required peripherals + */ +static void enable_per_clocks(void) +{ + /* UART0 */ + writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl); + while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN) + ; + + /* HSMMC1 */ + writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl); + while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN) + ; +} + +/* + * select the HS1 or HS2 for DCO Freq + * return : CLKCTRL + */ +static u32 pll_dco_freq_sel(u32 clkout_dco) +{ + if (clkout_dco >= DCO_HS2_MIN && clkout_dco < DCO_HS2_MAX) + return SELFREQDCO_HS2; + else if (clkout_dco >= DCO_HS1_MIN && clkout_dco < DCO_HS1_MAX) + return SELFREQDCO_HS1; + else + return -1; +} + +/* + * select the sigma delta config + * return: sigma delta val + */ +static u32 pll_sigma_delta_val(u32 clkout_dco) +{ + u32 sig_val = 0; + float frac_div; + + frac_div = (float) clkout_dco / 250; + frac_div = frac_div + 0.90; + sig_val = (int)frac_div; + sig_val = sig_val << 24; + + return sig_val; +} + +/* + * configure individual ADPLLJ + */ +static void pll_config(u32 base, u32 n, u32 m, u32 m2, + u32 clkctrl_val, int adpllj) +{ + const struct ad_pll *adpll = (struct ad_pll *)base; + u32 m2nval, mn2val, read_clkctrl = 0, clkout_dco = 0; + u32 sig_val = 0, hs_mod = 0; + + m2nval = (m2 << ADPLLJ_M2NDIV_M2SHIFT) | n; + mn2val = m; + + /* calculate clkout_dco */ + clkout_dco = ((OSC_0_FREQ / (n+1)) * m); + + /* sigma delta & Hs mode selection skip for ADPLLS*/ + if (adpllj) { + sig_val = pll_sigma_delta_val(clkout_dco); + hs_mod = pll_dco_freq_sel(clkout_dco); + } + + /* by-pass pll */ + read_clkctrl = readl(&adpll->clkctrl); + writel((read_clkctrl | ADPLLJ_CLKCTRL_IDLE), &adpll->clkctrl); + while ((readl(&adpll->status) & ADPLLJ_STATUS_BYPASSANDACK) + != ADPLLJ_STATUS_BYPASSANDACK) + ; + + /* clear TINITZ */ + read_clkctrl = readl(&adpll->clkctrl); + writel((read_clkctrl & ~ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl); + + /* + * ref_clk = 20/(n + 1); + * clkout_dco = ref_clk * m; + * clk_out = clkout_dco/m2; + */ + read_clkctrl = readl(&adpll->clkctrl) & + ~(ADPLLJ_CLKCTRL_LPMODE | + ADPLLJ_CLKCTRL_DRIFTGUARDIAN | + ADPLLJ_CLKCTRL_REGM4XEN); + writel(m2nval, &adpll->m2ndiv); + writel(mn2val, &adpll->mn2div); + + /* Skip for modena(ADPLLS) */ + if (adpllj) { + writel(sig_val, &adpll->fracdiv); + writel((read_clkctrl | hs_mod), &adpll->clkctrl); + } + + /* Load M2, N2 dividers of ADPLL */ + writel(ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv); + writel(~ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv); + + /* Load M, N dividers of ADPLL */ + writel(ADPLLJ_TENABLE_ENB, &adpll->tenable); + writel(~ADPLLJ_TENABLE_ENB, &adpll->tenable); + + /* Configure CLKDCOLDOEN,CLKOUTLDOEN,CLKOUT Enable BITS */ + read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_CLKDCO; + if (adpllj) + writel((read_clkctrl | ADPLLJ_CLKCTRL_CLKDCO), + &adpll->clkctrl); + + /* Enable TINTZ and disable IDLE(PLL in Active & Locked Mode */ + read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_IDLE; + writel((read_clkctrl | ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl); + + /* Wait for phase and freq lock */ + while ((readl(&adpll->status) & ADPLLJ_STATUS_PHSFRQLOCK) != + ADPLLJ_STATUS_PHSFRQLOCK) + ; +} + +static void unlock_pll_control_mmr(void) +{ + /* TRM 2.10.1.4 and 3.2.7-3.2.11 */ + writel(0x1EDA4C3D, 0x481C5040); + writel(0x2FF1AC2B, 0x48140060); + writel(0xF757FDC0, 0x48140064); + writel(0xE2BC3A6D, 0x48140068); + writel(0x1EBF131D, 0x4814006c); + writel(0x6F361E05, 0x48140070); +} + +static void mpu_pll_config(void) +{ + pll_config(MPU_PLL_BASE, MPU_N, MPU_M, MPU_M2, MPU_CLKCTRL, 0); +} + +static void l3_pll_config(void) +{ + u32 l3_osc_src, rd_osc_src = 0; + + l3_osc_src = L3_OSC_SRC; + rd_osc_src = readl(OSC_SRC_CTRL); + + if (OSC_SRC0 == l3_osc_src) + writel((rd_osc_src & 0xfffffffe)|0x0, OSC_SRC_CTRL); + else + writel((rd_osc_src & 0xfffffffe)|0x1, OSC_SRC_CTRL); + + pll_config(L3_PLL_BASE, L3_N, L3_M, L3_M2, L3_CLKCTRL, 1); +} + +void ddr_pll_config(unsigned int ddrpll_m) +{ + pll_config(DDR_PLL_BASE, DDR_N, DDR_M, DDR_M2, DDR_CLKCTRL, 1); +} + +void enable_emif_clocks(void) {}; + +void enable_dmm_clocks(void) +{ + writel(PRCM_MOD_EN, &cmdef->fwclkctrl); + writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl); + writel(PRCM_MOD_EN, &cmdef->emif0clkctrl); + while ((readl(&cmdef->emif0clkctrl)) != PRCM_MOD_EN) + ; + writel(PRCM_MOD_EN, &cmdef->emif1clkctrl); + while ((readl(&cmdef->emif1clkctrl)) != PRCM_MOD_EN) + ; + while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300) + ; + writel(PRCM_MOD_EN, &cmdef->dmmclkctrl); + while ((readl(&cmdef->dmmclkctrl)) != PRCM_MOD_EN) + ; + writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl); + while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100) + ; +} + +/* + * Configure the PLL/PRCM for necessary peripherals + */ +void pll_init() +{ + unlock_pll_control_mmr(); + + /* Enable the control module */ + writel(PRCM_MOD_EN, &cmalwon->controlclkctrl); + + mpu_pll_config(); + + l3_pll_config(); + + /* Enable the required peripherals */ + enable_per_clocks(); +} diff --git a/arch/arm/cpu/armv7/am33xx/ddr.c b/arch/arm/cpu/armv7/am33xx/ddr.c index fd9fc4a720..d1e2fd3f21 100644 --- a/arch/arm/cpu/armv7/am33xx/ddr.c +++ b/arch/arm/cpu/armv7/am33xx/ddr.c @@ -24,15 +24,20 @@ http://www.ti.com/ /** * Base address for EMIF instances */ -static struct emif_reg_struct *emif_reg = { - (struct emif_reg_struct *)EMIF4_0_CFG_BASE}; +static struct emif_reg_struct *emif_reg[2] = { + (struct emif_reg_struct *)EMIF4_0_CFG_BASE, + (struct emif_reg_struct *)EMIF4_1_CFG_BASE}; /** - * Base address for DDR instance + * Base addresses for DDR PHY cmd/data regs */ -static struct ddr_regs *ddr_reg[2] = { - (struct ddr_regs *)DDR_PHY_BASE_ADDR, - (struct ddr_regs *)DDR_PHY_BASE_ADDR2}; +static struct ddr_cmd_regs *ddr_cmd_reg[2] = { + (struct ddr_cmd_regs *)DDR_PHY_CMD_ADDR, + (struct ddr_cmd_regs *)DDR_PHY_CMD_ADDR2}; + +static struct ddr_data_regs *ddr_data_reg[2] = { + (struct ddr_data_regs *)DDR_PHY_DATA_ADDR, + (struct ddr_data_regs *)DDR_PHY_DATA_ADDR2}; /** * Base address for ddr io control instances @@ -43,70 +48,93 @@ static struct ddr_cmdtctrl *ioctrl_reg = { /** * Configure SDRAM */ -void config_sdram(const struct emif_regs *regs) +void config_sdram(const struct emif_regs *regs, int nr) { - writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl); - writel(regs->ref_ctrl, &emif_reg->emif_sdram_ref_ctrl_shdw); - if (regs->zq_config){ - writel(regs->zq_config, &emif_reg->emif_zq_config); + if (regs->zq_config) { + /* + * A value of 0x2800 for the REF CTRL will give us + * about 570us for a delay, which will be long enough + * to configure things. + */ + writel(0x2800, &emif_reg[nr]->emif_sdram_ref_ctrl); + writel(regs->zq_config, &emif_reg[nr]->emif_zq_config); writel(regs->sdram_config, &cstat->secure_emif_sdram_config); + writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config); + writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl); + writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw); } - writel(regs->sdram_config, &emif_reg->emif_sdram_config); + writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl); + writel(regs->ref_ctrl, &emif_reg[nr]->emif_sdram_ref_ctrl_shdw); + writel(regs->sdram_config, &emif_reg[nr]->emif_sdram_config); } /** * Set SDRAM timings */ -void set_sdram_timings(const struct emif_regs *regs) +void set_sdram_timings(const struct emif_regs *regs, int nr) { - writel(regs->sdram_tim1, &emif_reg->emif_sdram_tim_1); - writel(regs->sdram_tim1, &emif_reg->emif_sdram_tim_1_shdw); - writel(regs->sdram_tim2, &emif_reg->emif_sdram_tim_2); - writel(regs->sdram_tim2, &emif_reg->emif_sdram_tim_2_shdw); - writel(regs->sdram_tim3, &emif_reg->emif_sdram_tim_3); - writel(regs->sdram_tim3, &emif_reg->emif_sdram_tim_3_shdw); + writel(regs->sdram_tim1, &emif_reg[nr]->emif_sdram_tim_1); + writel(regs->sdram_tim1, &emif_reg[nr]->emif_sdram_tim_1_shdw); + writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2); + writel(regs->sdram_tim2, &emif_reg[nr]->emif_sdram_tim_2_shdw); + writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3); + writel(regs->sdram_tim3, &emif_reg[nr]->emif_sdram_tim_3_shdw); } /** * Configure DDR PHY */ -void config_ddr_phy(const struct emif_regs *regs) +void config_ddr_phy(const struct emif_regs *regs, int nr) { - writel(regs->emif_ddr_phy_ctlr_1, &emif_reg->emif_ddr_phy_ctrl_1); - writel(regs->emif_ddr_phy_ctlr_1, &emif_reg->emif_ddr_phy_ctrl_1_shdw); + writel(regs->emif_ddr_phy_ctlr_1, + &emif_reg[nr]->emif_ddr_phy_ctrl_1); + writel(regs->emif_ddr_phy_ctlr_1, + &emif_reg[nr]->emif_ddr_phy_ctrl_1_shdw); } /** * Configure DDR CMD control registers */ -void config_cmd_ctrl(const struct cmd_control *cmd) +void config_cmd_ctrl(const struct cmd_control *cmd, int nr) { - writel(cmd->cmd0csratio, &ddr_reg[0]->cm0csratio); - writel(cmd->cmd0dldiff, &ddr_reg[0]->cm0dldiff); - writel(cmd->cmd0iclkout, &ddr_reg[0]->cm0iclkout); + writel(cmd->cmd0csratio, &ddr_cmd_reg[nr]->cm0csratio); + writel(cmd->cmd0dldiff, &ddr_cmd_reg[nr]->cm0dldiff); + writel(cmd->cmd0iclkout, &ddr_cmd_reg[nr]->cm0iclkout); - writel(cmd->cmd1csratio, &ddr_reg[0]->cm1csratio); - writel(cmd->cmd1dldiff, &ddr_reg[0]->cm1dldiff); - writel(cmd->cmd1iclkout, &ddr_reg[0]->cm1iclkout); + writel(cmd->cmd1csratio, &ddr_cmd_reg[nr]->cm1csratio); + writel(cmd->cmd1dldiff, &ddr_cmd_reg[nr]->cm1dldiff); + writel(cmd->cmd1iclkout, &ddr_cmd_reg[nr]->cm1iclkout); - writel(cmd->cmd2csratio, &ddr_reg[0]->cm2csratio); - writel(cmd->cmd2dldiff, &ddr_reg[0]->cm2dldiff); - writel(cmd->cmd2iclkout, &ddr_reg[0]->cm2iclkout); + writel(cmd->cmd2csratio, &ddr_cmd_reg[nr]->cm2csratio); + writel(cmd->cmd2dldiff, &ddr_cmd_reg[nr]->cm2dldiff); + writel(cmd->cmd2iclkout, &ddr_cmd_reg[nr]->cm2iclkout); } /** * Configure DDR DATA registers */ -void config_ddr_data(int macrono, const struct ddr_data *data) +void config_ddr_data(const struct ddr_data *data, int nr) { - writel(data->datardsratio0, &ddr_reg[macrono]->dt0rdsratio0); - writel(data->datawdsratio0, &ddr_reg[macrono]->dt0wdsratio0); - writel(data->datawiratio0, &ddr_reg[macrono]->dt0wiratio0); - writel(data->datagiratio0, &ddr_reg[macrono]->dt0giratio0); - writel(data->datafwsratio0, &ddr_reg[macrono]->dt0fwsratio0); - writel(data->datawrsratio0, &ddr_reg[macrono]->dt0wrsratio0); - writel(data->datauserank0delay, &ddr_reg[macrono]->dt0rdelays0); - writel(data->datadldiff0, &ddr_reg[macrono]->dt0dldiff0); + int i; + + for (i = 0; i < DDR_DATA_REGS_NR; i++) { + writel(data->datardsratio0, + &(ddr_data_reg[nr]+i)->dt0rdsratio0); + writel(data->datawdsratio0, + &(ddr_data_reg[nr]+i)->dt0wdsratio0); + writel(data->datawiratio0, + &(ddr_data_reg[nr]+i)->dt0wiratio0); + writel(data->datagiratio0, + &(ddr_data_reg[nr]+i)->dt0giratio0); + writel(data->datafwsratio0, + &(ddr_data_reg[nr]+i)->dt0fwsratio0); + writel(data->datawrsratio0, + &(ddr_data_reg[nr]+i)->dt0wrsratio0); + writel(data->datauserank0delay, + &(ddr_data_reg[nr]+i)->dt0rdelays0); + writel(data->datadldiff0, + &(ddr_data_reg[nr]+i)->dt0dldiff0); + } } void config_io_ctrl(unsigned long val) diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c index 01e3a5204e..aa84e96173 100644 --- a/arch/arm/cpu/armv7/am33xx/emif4.c +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -44,44 +44,65 @@ void dram_init_banksize(void) #ifdef CONFIG_SPL_BUILD -static struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR; +static struct dmm_lisa_map_regs *hw_lisa_map_regs = + (struct dmm_lisa_map_regs *)DMM_BASE; +static struct vtp_reg *vtpreg[2] = { + (struct vtp_reg *)VTP0_CTRL_ADDR, + (struct vtp_reg *)VTP1_CTRL_ADDR}; +#ifdef CONFIG_AM33XX static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR; +#endif + +void config_dmm(const struct dmm_lisa_map_regs *regs) +{ + enable_dmm_clocks(); + + writel(0, &hw_lisa_map_regs->dmm_lisa_map_3); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_2); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_1); + writel(0, &hw_lisa_map_regs->dmm_lisa_map_0); -static void config_vtp(void) + writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3); + writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2); + writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1); + writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0); +} + +static void config_vtp(int nr) { - writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_ENABLE, - &vtpreg->vtp0ctrlreg); - writel(readl(&vtpreg->vtp0ctrlreg) & (~VTP_CTRL_START_EN), - &vtpreg->vtp0ctrlreg); - writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_START_EN, - &vtpreg->vtp0ctrlreg); + writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_ENABLE, + &vtpreg[nr]->vtp0ctrlreg); + writel(readl(&vtpreg[nr]->vtp0ctrlreg) & (~VTP_CTRL_START_EN), + &vtpreg[nr]->vtp0ctrlreg); + writel(readl(&vtpreg[nr]->vtp0ctrlreg) | VTP_CTRL_START_EN, + &vtpreg[nr]->vtp0ctrlreg); /* Poll for READY */ - while ((readl(&vtpreg->vtp0ctrlreg) & VTP_CTRL_READY) != + while ((readl(&vtpreg[nr]->vtp0ctrlreg) & VTP_CTRL_READY) != VTP_CTRL_READY) ; } void config_ddr(unsigned int pll, unsigned int ioctrl, const struct ddr_data *data, const struct cmd_control *ctrl, - const struct emif_regs *regs) + const struct emif_regs *regs, int nr) { enable_emif_clocks(); ddr_pll_config(pll); - config_vtp(); - config_cmd_ctrl(ctrl); - - config_ddr_data(0, data); - config_ddr_data(1, data); + config_vtp(nr); + config_cmd_ctrl(ctrl, nr); + config_ddr_data(data, nr); +#ifdef CONFIG_AM33XX config_io_ctrl(ioctrl); /* Set CKE to be controlled by EMIF/DDR PHY */ writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl); +#endif /* Program EMIF instance */ - config_ddr_phy(regs); - set_sdram_timings(regs); - config_sdram(regs); + config_ddr_phy(regs, nr); + set_sdram_timings(regs, nr); + config_sdram(regs, nr); } #endif diff --git a/arch/arm/cpu/armv7/am33xx/mem.c b/arch/arm/cpu/armv7/am33xx/mem.c index b8f54abae2..b86b0ded3f 100644 --- a/arch/arm/cpu/armv7/am33xx/mem.c +++ b/arch/arm/cpu/armv7/am33xx/mem.c @@ -83,7 +83,7 @@ void gpmc_init(void) /* global settings */ writel(0x00000008, &gpmc_cfg->sysconfig); writel(0x00000100, &gpmc_cfg->irqstatus); - writel(0x00000200, &gpmc_cfg->irqenable); + writel(0x00000100, &gpmc_cfg->irqenable); writel(0x00000012, &gpmc_cfg->config); /* * Disable the GPMC0 config set by ROM code diff --git a/arch/arm/cpu/armv7/am33xx/sys_info.c b/arch/arm/cpu/armv7/am33xx/sys_info.c index 507b6180e6..5fd8b47b2d 100644 --- a/arch/arm/cpu/armv7/am33xx/sys_info.c +++ b/arch/arm/cpu/armv7/am33xx/sys_info.c @@ -98,6 +98,9 @@ int print_cpuinfo(void) case AM335X: cpu_s = "AM335X"; break; + case TI81XX: + cpu_s = "TI81XX"; + break; default: cpu_s = "Unknown cpu type"; break; @@ -120,7 +123,7 @@ int print_cpuinfo(void) sec_s = "?"; } - printf("AM%s-%s rev %d\n", + printf("%s-%s rev %d\n", cpu_s, sec_s, get_cpu_rev()); /* TODO: Print ARM and DDR frequencies */ diff --git a/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds new file mode 100644 index 0000000000..b6a929ff7e --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/u-boot-spl.lds @@ -0,0 +1,67 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_SIZE } +MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ + LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + .text : + { + __start = .; + arch/arm/cpu/armv7/start.o (.text) + *(.text*) + } >.sram + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } >.sram + + . = ALIGN(4); + __image_copy_end = .; + _end = .; + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } >.sdram +} diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk index 350e946392..9c3e2f3ce4 100644 --- a/arch/arm/cpu/armv7/config.mk +++ b/arch/arm/cpu/armv7/config.mk @@ -40,5 +40,5 @@ PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,) PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED) ifneq ($(CONFIG_IMX_CONFIG),) -ALL-y += $(OBJTREE)/u-boot.imx +ALL-y += $(obj)u-boot.imx endif diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile index cbce411cca..4f9ca6890c 100644 --- a/arch/arm/cpu/armv7/mx6/Makefile +++ b/arch/arm/cpu/armv7/mx6/Makefile @@ -28,7 +28,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o COBJS = soc.o clock.o -SOBJS = lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index a8aad5dd0a..193ba1240f 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -30,6 +30,7 @@ #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> #include <asm/imx-common/boot_mode.h> +#include <stdbool.h> struct scu_regs { u32 ctrl; @@ -121,12 +122,23 @@ void set_vddsoc(u32 mv) writel(reg, &anatop->reg_core); } +static void imx_set_wdog_powerdown(bool enable) +{ + struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR; + struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR; + + /* Write to the PDE (Power Down Enable) bit */ + writew(enable, &wdog1->wmcr); + writew(enable, &wdog2->wmcr); +} + int arch_cpu_init(void) { init_aips(); set_vddsoc(1200); /* Set VDDSOC to 1.2V */ + imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */ return 0; } @@ -193,3 +205,7 @@ const struct boot_mode soc_boot_modes[] = { {"esdhc4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, {NULL, 0}, }; + +void s_init(void) +{ +} diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 0efc80ddeb..55e82ba369 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -36,7 +36,7 @@ COBJS += emif-common.o COBJS += vc.o endif -ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) +ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),) COBJS += boot-common.o SOBJS += lowlevel_init.o endif diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 2b584e0a53..24cbe2da05 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -55,17 +55,20 @@ void spl_board_init(void) #ifdef CONFIG_SPL_NAND_SUPPORT gpmc_init(); #endif +#if defined(CONFIG_AM33XX) && defined(CONFIG_SPL_MUSB_NEW_SUPPORT) + arch_misc_init(); +#endif } int board_mmc_init(bd_t *bis) { switch (spl_boot_device()) { case BOOT_DEVICE_MMC1: - omap_mmc_init(0, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); break; case BOOT_DEVICE_MMC2: case BOOT_DEVICE_MMC2_2: - omap_mmc_init(1, 0, 0); + omap_mmc_init(1, 0, 0, -1, -1); break; } return 0; diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index b1fd277d6d..9ed18995ea 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -36,6 +36,7 @@ #include <asm/arch/sys_proto.h> #include <asm/utils.h> #include <asm/omap_gpio.h> +#include <asm/emif.h> #ifndef CONFIG_SPL_BUILD /* @@ -46,9 +47,20 @@ #define puts(s) #endif +const u32 sys_clk_array[8] = { + 12000000, /* 12 MHz */ + 13000000, /* 13 MHz */ + 16800000, /* 16.8 MHz */ + 19200000, /* 19.2 MHz */ + 26000000, /* 26 MHz */ + 27000000, /* 27 MHz */ + 38400000, /* 38.4 MHz */ + 20000000, /* 20 MHz */ +}; + static inline u32 __get_sys_clk_index(void) { - u32 ind; + s8 ind; /* * For ES1 the ROM code calibration of sys clock is not reliable * due to hw issue. So, use hard-coded value. If this value is not @@ -60,8 +72,15 @@ static inline u32 __get_sys_clk_index(void) ind = OMAP_SYS_CLK_IND_38_4_MHZ; else { /* SYS_CLKSEL - 1 to match the dpll param array indices */ - ind = (readl(&prcm->cm_sys_clksel) & + ind = (readl((*prcm)->cm_sys_clksel) & CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1; + /* + * SYS_CLKSEL value for 20MHz is 0. This is introduced newly + * in DRA7XX socs. SYS_CLKSEL -1 will be greater than + * NUM_SYS_CLK. So considering the last 3 bits as the index + * for the dpll param array. + */ + ind &= CM_SYS_CLKSEL_SYS_CLKSEL_MASK; } return ind; } @@ -75,7 +94,34 @@ u32 get_sys_clk_freq(void) return sys_clk_array[index]; } -static inline void do_bypass_dpll(u32 *const base) +void setup_post_dividers(u32 const base, const struct dpll_params *params) +{ + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + + /* Setup post-dividers */ + if (params->m2 >= 0) + writel(params->m2, &dpll_regs->cm_div_m2_dpll); + if (params->m3 >= 0) + writel(params->m3, &dpll_regs->cm_div_m3_dpll); + if (params->m4_h11 >= 0) + writel(params->m4_h11, &dpll_regs->cm_div_m4_h11_dpll); + if (params->m5_h12 >= 0) + writel(params->m5_h12, &dpll_regs->cm_div_m5_h12_dpll); + if (params->m6_h13 >= 0) + writel(params->m6_h13, &dpll_regs->cm_div_m6_h13_dpll); + if (params->m7_h14 >= 0) + writel(params->m7_h14, &dpll_regs->cm_div_m7_h14_dpll); + if (params->h21 >= 0) + writel(params->h21, &dpll_regs->cm_div_h21_dpll); + if (params->h22 >= 0) + writel(params->h22, &dpll_regs->cm_div_h22_dpll); + if (params->h23 >= 0) + writel(params->h23, &dpll_regs->cm_div_h23_dpll); + if (params->h24 >= 0) + writel(params->h24, &dpll_regs->cm_div_h24_dpll); +} + +static inline void do_bypass_dpll(u32 const base) { struct dpll_regs *dpll_regs = (struct dpll_regs *)base; @@ -85,17 +131,17 @@ static inline void do_bypass_dpll(u32 *const base) CM_CLKMODE_DPLL_EN_SHIFT); } -static inline void wait_for_bypass(u32 *const base) +static inline void wait_for_bypass(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll, LDELAY)) { - printf("Bypassing DPLL failed %p\n", base); + printf("Bypassing DPLL failed %x\n", base); } } -static inline void do_lock_dpll(u32 *const base) +static inline void do_lock_dpll(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; @@ -104,18 +150,18 @@ static inline void do_lock_dpll(u32 *const base) DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT); } -static inline void wait_for_lock(u32 *const base) +static inline void wait_for_lock(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK, &dpll_regs->cm_idlest_dpll, LDELAY)) { - printf("DPLL locking failed for %p\n", base); + printf("DPLL locking failed for %x\n", base); hang(); } } -inline u32 check_for_lock(u32 *const base) +inline u32 check_for_lock(u32 const base) { struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; u32 lock = readl(&dpll_regs->cm_idlest_dpll) & ST_DPLL_CLK_MASK; @@ -123,12 +169,65 @@ inline u32 check_for_lock(u32 *const base) return lock; } -static void do_setup_dpll(u32 *const base, const struct dpll_params *params, +const struct dpll_params *get_mpu_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->mpu[sysclk_ind]; +} + +const struct dpll_params *get_core_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->core[sysclk_ind]; +} + +const struct dpll_params *get_per_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->per[sysclk_ind]; +} + +const struct dpll_params *get_iva_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->iva[sysclk_ind]; +} + +const struct dpll_params *get_usb_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->usb[sysclk_ind]; +} + +const struct dpll_params *get_abe_dpll_params(struct dplls const *dpll_data) +{ +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->abe[sysclk_ind]; +#else + return dpll_data->abe; +#endif +} + +static const struct dpll_params *get_ddr_dpll_params + (struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + + if (!dpll_data->ddr) + return NULL; + return &dpll_data->ddr[sysclk_ind]; +} + +static void do_setup_dpll(u32 const base, const struct dpll_params *params, u8 lock, char *dpll) { u32 temp, M, N; struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + if (!params) + return; + temp = readl(&dpll_regs->cm_clksel_dpll); if (check_for_lock(base)) { @@ -183,7 +282,7 @@ u32 omap_ddr_clk(void) omap_rev = omap_revision(); sys_clk_khz = get_sys_clk_freq() / 1000; - core_dpll_params = get_core_dpll_params(); + core_dpll_params = get_core_dpll_params(*dplls_data); debug("sys_clk %d\n ", sys_clk_khz * 1000); @@ -235,24 +334,19 @@ void configure_mpu_dpll(void) */ if ((omap_rev >= OMAP4460_ES1_0) && (omap_rev < OMAP5430_ES1_0)) { mpu_dpll_regs = - (struct dpll_regs *)&prcm->cm_clkmode_dpll_mpu; - bypass_dpll(&prcm->cm_clkmode_dpll_mpu); - clrbits_le32(&prcm->cm_mpu_mpu_clkctrl, + (struct dpll_regs *)((*prcm)->cm_clkmode_dpll_mpu); + bypass_dpll((*prcm)->cm_clkmode_dpll_mpu); + clrbits_le32((*prcm)->cm_mpu_mpu_clkctrl, MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK); - setbits_le32(&prcm->cm_mpu_mpu_clkctrl, + setbits_le32((*prcm)->cm_mpu_mpu_clkctrl, MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK); clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll, CM_CLKSEL_DCC_EN_MASK); } - setbits_le32(&prcm->cm_mpu_mpu_clkctrl, - MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK); - setbits_le32(&prcm->cm_mpu_mpu_clkctrl, - MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK); + params = get_mpu_dpll_params(*dplls_data); - params = get_mpu_dpll_params(); - - do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu"); + do_setup_dpll((*prcm)->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu"); debug("MPU DPLL locked\n"); } @@ -271,17 +365,17 @@ static void setup_usb_dpll(void) * Use CLKINP in KHz and adjust the denominator accordingly so * that we have enough accuracy and at the same time no overflow */ - params = get_usb_dpll_params(); + params = get_usb_dpll_params(*dplls_data); num = params->m * sys_clk_khz; den = (params->n + 1) * 250 * 1000; num += den - 1; sd_div = num / den; - clrsetbits_le32(&prcm->cm_clksel_dpll_usb, + clrsetbits_le32((*prcm)->cm_clksel_dpll_usb, CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK, sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT); /* Now setup the dpll with the regular function */ - do_setup_dpll(&prcm->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb"); + do_setup_dpll((*prcm)->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb"); } #endif @@ -293,28 +387,28 @@ static void setup_dplls(void) debug("setup_dplls\n"); /* CORE dpll */ - params = get_core_dpll_params(); /* default - safest */ + params = get_core_dpll_params(*dplls_data); /* default - safest */ /* * Do not lock the core DPLL now. Just set it up. * Core DPLL will be locked after setting up EMIF * using the FREQ_UPDATE method(freq_update_core()) */ - if (omap_revision() != OMAP5432_ES1_0) - do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, + if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) + do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params, DPLL_NO_LOCK, "core"); else - do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, + do_setup_dpll((*prcm)->cm_clkmode_dpll_core, params, DPLL_LOCK, "core"); /* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */ temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) | (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) | (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT); - writel(temp, &prcm->cm_clksel_core); + writel(temp, (*prcm)->cm_clksel_core); debug("Core DPLL configured\n"); /* lock PER dpll */ - params = get_per_dpll_params(); - do_setup_dpll(&prcm->cm_clkmode_dpll_per, + params = get_per_dpll_params(*dplls_data); + do_setup_dpll((*prcm)->cm_clkmode_dpll_per, params, DPLL_LOCK, "per"); debug("PER DPLL locked\n"); @@ -324,6 +418,9 @@ static void setup_dplls(void) #ifdef CONFIG_USB_EHCI_OMAP setup_usb_dpll(); #endif + params = get_ddr_dpll_params(*dplls_data); + do_setup_dpll((*prcm)->cm_clkmode_dpll_ddrphy, + params, DPLL_LOCK, "ddr"); } #ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL @@ -333,14 +430,14 @@ static void setup_non_essential_dplls(void) const struct dpll_params *params; /* IVA */ - clrsetbits_le32(&prcm->cm_bypclk_dpll_iva, + clrsetbits_le32((*prcm)->cm_bypclk_dpll_iva, CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2); - params = get_iva_dpll_params(); - do_setup_dpll(&prcm->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva"); + params = get_iva_dpll_params(*dplls_data); + do_setup_dpll((*prcm)->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva"); /* Configure ABE dpll */ - params = get_abe_dpll_params(); + params = get_abe_dpll_params(*dplls_data); #ifdef CONFIG_SYS_OMAP_ABE_SYSCK abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK; #else @@ -349,64 +446,65 @@ static void setup_non_essential_dplls(void) * We need to enable some additional options to achieve * 196.608MHz from 32768 Hz */ - setbits_le32(&prcm->cm_clkmode_dpll_abe, + setbits_le32((*prcm)->cm_clkmode_dpll_abe, CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK| CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK| CM_CLKMODE_DPLL_LPMODE_EN_MASK| CM_CLKMODE_DPLL_REGM4XEN_MASK); /* Spend 4 REFCLK cycles at each stage */ - clrsetbits_le32(&prcm->cm_clkmode_dpll_abe, + clrsetbits_le32((*prcm)->cm_clkmode_dpll_abe, CM_CLKMODE_DPLL_RAMP_RATE_MASK, 1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT); #endif /* Select the right reference clk */ - clrsetbits_le32(&prcm->cm_abe_pll_ref_clksel, + clrsetbits_le32((*prcm)->cm_abe_pll_ref_clksel, CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK, abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT); /* Lock the dpll */ - do_setup_dpll(&prcm->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe"); + do_setup_dpll((*prcm)->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe"); } #endif -void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv) +u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic) { - u32 step; - int ret = 0; - - /* See if we can first get the GPIO if needed */ - if (gpio >= 0) - ret = gpio_request(gpio, "TPS62361_VSEL0_GPIO"); - if (ret < 0) { - printf("%s: gpio %d request failed %d\n", __func__, gpio, ret); - gpio = -1; - } - - /* Pull the GPIO low to select SET0 register, while we program SET1 */ - if (gpio >= 0) - gpio_direction_output(gpio, 0); + u32 offset_code; - step = volt_mv - TPS62361_BASE_VOLT_MV; - step /= 10; + volt_offset -= pmic->base_offset; - debug("do_scale_tps62361: volt - %d step - 0x%x\n", volt_mv, step); - if (omap_vc_bypass_send_value(TPS62361_I2C_SLAVE_ADDR, reg, step)) - puts("Scaling voltage failed for vdd_mpu from TPS\n"); + offset_code = (volt_offset + pmic->step - 1) / pmic->step; - /* Pull the GPIO high to select SET1 register */ - if (gpio >= 0) - gpio_direction_output(gpio, 1); + /* + * Offset codes 1-6 all give the base voltage in Palmas + * Offset code 0 switches OFF the SMPS + */ + return offset_code + pmic->start_code; } -void do_scale_vcore(u32 vcore_reg, u32 volt_mv) +void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic) { u32 offset_code; u32 offset = volt_mv; + int ret = 0; + + /* See if we can first get the GPIO if needed */ + if (pmic->gpio_en) + ret = gpio_request(pmic->gpio, "PMIC_GPIO"); + + if (ret < 0) { + printf("%s: gpio %d request failed %d\n", __func__, + pmic->gpio, ret); + return; + } + + /* Pull the GPIO low to select SET0 register, while we program SET1 */ + if (pmic->gpio_en) + gpio_direction_output(pmic->gpio, 0); /* convert to uV for better accuracy in the calculations */ offset *= 1000; - offset_code = get_offset_code(offset); + offset_code = get_offset_code(offset, pmic); debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv, offset_code); @@ -414,16 +512,46 @@ void do_scale_vcore(u32 vcore_reg, u32 volt_mv) if (omap_vc_bypass_send_value(SMPS_I2C_SLAVE_ADDR, vcore_reg, offset_code)) printf("Scaling voltage failed for 0x%x\n", vcore_reg); + + if (pmic->gpio_en) + gpio_direction_output(pmic->gpio, 1); +} + +/* + * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva + * We set the maximum voltages allowed here because Smart-Reflex is not + * enabled in bootloader. Voltage initialization in the kernel will set + * these to the nominal values after enabling Smart-Reflex + */ +void scale_vcores(struct vcores_data const *vcores) +{ + omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); + + do_scale_vcore(vcores->core.addr, vcores->core.value, + vcores->core.pmic); + + do_scale_vcore(vcores->mpu.addr, vcores->mpu.value, + vcores->mpu.pmic); + + do_scale_vcore(vcores->mm.addr, vcores->mm.value, + vcores->mm.pmic); + + if (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3) { + /* Configure LDO SRAM "magic" bits */ + writel(2, (*prcm)->prm_sldo_core_setup); + writel(2, (*prcm)->prm_sldo_mpu_setup); + writel(2, (*prcm)->prm_sldo_mm_setup); + } } -static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode) +static inline void enable_clock_domain(u32 const clkctrl_reg, u32 enable_mode) { clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK, enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT); - debug("Enable clock domain - %p\n", clkctrl_reg); + debug("Enable clock domain - %x\n", clkctrl_reg); } -static inline void wait_for_clk_enable(u32 *clkctrl_addr) +static inline void wait_for_clk_enable(u32 clkctrl_addr) { u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED; u32 bound = LDELAY; @@ -435,19 +563,19 @@ static inline void wait_for_clk_enable(u32 *clkctrl_addr) idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >> MODULE_CLKCTRL_IDLEST_SHIFT; if (--bound == 0) { - printf("Clock enable failed for 0x%p idlest 0x%x\n", + printf("Clock enable failed for 0x%x idlest 0x%x\n", clkctrl_addr, clkctrl); return; } } } -static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode, +static inline void enable_clock_module(u32 const clkctrl_addr, u32 enable_mode, u32 wait_for_enable) { clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK, enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT); - debug("Enable clock module - %p\n", clkctrl_addr); + debug("Enable clock module - %x\n", clkctrl_addr); if (wait_for_enable) wait_for_clk_enable(clkctrl_addr); } @@ -458,12 +586,12 @@ void freq_update_core(void) const struct dpll_params *core_dpll_params; u32 omap_rev = omap_revision(); - core_dpll_params = get_core_dpll_params(); + core_dpll_params = get_core_dpll_params(*dplls_data); /* Put EMIF clock domain in sw wakeup mode */ - enable_clock_domain(&prcm->cm_memif_clkstctrl, + enable_clock_domain((*prcm)->cm_memif_clkstctrl, CD_CLKCTRL_CLKTRCTRL_SW_WKUP); - wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl); - wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl); freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK | SHADOW_FREQ_CONFIG1_DLL_RESET_MASK; @@ -475,9 +603,9 @@ void freq_update_core(void) SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) & SHADOW_FREQ_CONFIG1_M2_DIV_MASK; - writel(freq_config1, &prcm->cm_shadow_freq_config1); + writel(freq_config1, (*prcm)->cm_shadow_freq_config1); if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0, - &prcm->cm_shadow_freq_config1, LDELAY)) { + (u32 *) (*prcm)->cm_shadow_freq_config1, LDELAY)) { puts("FREQ UPDATE procedure failed!!"); hang(); } @@ -489,20 +617,20 @@ void freq_update_core(void) */ if (omap_rev != OMAP5430_ES1_0) { /* Put EMIF clock domain back in hw auto mode */ - enable_clock_domain(&prcm->cm_memif_clkstctrl, + enable_clock_domain((*prcm)->cm_memif_clkstctrl, CD_CLKCTRL_CLKTRCTRL_HW_AUTO); - wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl); - wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_1_clkctrl); + wait_for_clk_enable((*prcm)->cm_memif_emif_2_clkctrl); } } -void bypass_dpll(u32 *const base) +void bypass_dpll(u32 const base) { do_bypass_dpll(base); wait_for_bypass(base); } -void lock_dpll(u32 *const base) +void lock_dpll(u32 const base) { do_lock_dpll(base); wait_for_lock(base); @@ -511,39 +639,39 @@ void lock_dpll(u32 *const base) void setup_clocks_for_console(void) { /* Do not add any spl_debug prints in this function */ - clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, CD_CLKCTRL_CLKTRCTRL_SW_WKUP << CD_CLKCTRL_CLKTRCTRL_SHIFT); /* Enable all UARTs - console will be on one of them */ - clrsetbits_le32(&prcm->cm_l4per_uart1_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart1_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_uart2_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart2_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl, + clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl, MODULE_CLKCTRL_MODULEMODE_MASK, MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN << MODULE_CLKCTRL_MODULEMODE_SHIFT); - clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, + clrsetbits_le32((*prcm)->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK, CD_CLKCTRL_CLKTRCTRL_HW_AUTO << CD_CLKCTRL_CLKTRCTRL_SHIFT); } -void do_enable_clocks(u32 *const *clk_domains, - u32 *const *clk_modules_hw_auto, - u32 *const *clk_modules_explicit_en, +void do_enable_clocks(u32 const *clk_domains, + u32 const *clk_modules_hw_auto, + u32 const *clk_modules_explicit_en, u8 wait_for_enable) { u32 i, max = 100; @@ -582,7 +710,7 @@ void prcm_init(void) case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR: case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH: enable_basic_clocks(); - scale_vcores(); + scale_vcores(*omap_vcores); setup_dplls(); #ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL setup_non_essential_dplls(); diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index 88253cf8ce..9eb1279d41 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -66,6 +66,19 @@ inline u32 emif_num(u32 base) return 0; } +/* + * Get SDRAM type connected to EMIF. + * Assuming similar SDRAM parts are connected to both EMIF's + * which is typically the case. So it is sufficient to get + * SDRAM type from EMIF1. + */ +u32 emif_sdram_type() +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)EMIF1_BASE; + + return (readl(&emif->emif_sdram_config) & + EMIF_REG_SDRAM_TYPE_MASK) >> EMIF_REG_SDRAM_TYPE_SHIFT; +} static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr) { @@ -110,11 +123,13 @@ void emif_reset_phy(u32 base) static void do_lpddr2_init(u32 base, u32 cs) { u32 mr_addr; + const struct lpddr2_mr_regs *mr_regs; + get_lpddr2_mr_regs(&mr_regs); /* Wait till device auto initialization is complete */ while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK) ; - set_mr(base, cs, LPDDR2_MR10, MR10_ZQ_ZQINIT); + set_mr(base, cs, LPDDR2_MR10, mr_regs->mr10); /* * tZQINIT = 1 us * Enough loops assuming a maximum of 2GHz @@ -122,22 +137,18 @@ static void do_lpddr2_init(u32 base, u32 cs) sdelay(2000); - if (omap_revision() >= OMAP5430_ES1_0) - set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8); - else - set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3); - - set_mr(base, cs, LPDDR2_MR16, MR16_REF_FULL_ARRAY); + set_mr(base, cs, LPDDR2_MR1, mr_regs->mr1); + set_mr(base, cs, LPDDR2_MR16, mr_regs->mr16); /* * Enable refresh along with writing MR2 * Encoding of RL in MR2 is (RL - 2) */ mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK; - set_mr(base, cs, mr_addr, RL_FINAL - 2); + set_mr(base, cs, mr_addr, mr_regs->mr2); - if (omap_revision() >= OMAP5430_ES1_0) - set_mr(base, cs, LPDDR2_MR3, 0x1); + if (mr_regs->mr3 > 0) + set_mr(base, cs, LPDDR2_MR3, mr_regs->mr3); } static void lpddr2_init(u32 base, const struct emif_regs *regs) @@ -255,9 +266,6 @@ static void ddr3_leveling(u32 base, const struct emif_regs *regs) static void ddr3_init(u32 base, const struct emif_regs *regs) { struct emif_reg_struct *emif = (struct emif_reg_struct *)base; - u32 *ext_phy_ctrl_base = 0; - u32 *emif_ext_phy_ctrl_base = 0; - u32 i = 0; /* * Set SDRAM_CONFIG and PHY control registers to locked frequency @@ -277,27 +285,7 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl); writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl); - ext_phy_ctrl_base = (u32 *) &(regs->emif_ddr_ext_phy_ctrl_1); - emif_ext_phy_ctrl_base = (u32 *) &(emif->emif_ddr_ext_phy_ctrl_1); - - /* Configure external phy control timing registers */ - for (i = 0; i < EMIF_EXT_PHY_CTRL_TIMING_REG; i++) { - writel(*ext_phy_ctrl_base, emif_ext_phy_ctrl_base++); - /* Update shadow registers */ - writel(*ext_phy_ctrl_base++, emif_ext_phy_ctrl_base++); - } - - /* - * external phy 6-24 registers do not change with - * ddr frequency - */ - for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) { - writel(ddr3_ext_phy_ctrl_const_base[i], - emif_ext_phy_ctrl_base++); - /* Update shadow registers */ - writel(ddr3_ext_phy_ctrl_const_base[i], - emif_ext_phy_ctrl_base++); - } + do_ext_phy_settings(base, regs); /* enable leveling */ writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl); @@ -1079,7 +1067,7 @@ static void do_sdram_init(u32 base) * OPP to another) */ if (!(in_sdram || warm_reset())) { - if (omap_revision() != OMAP5432_ES1_0) + if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) lpddr2_init(base, regs); else ddr3_init(base, regs); @@ -1096,9 +1084,6 @@ void emif_post_init_config(u32 base) struct emif_reg_struct *emif = (struct emif_reg_struct *)base; u32 omap_rev = omap_revision(); - if (omap_rev == OMAP5430_ES1_0) - return; - /* reset phy on ES2.0 */ if (omap_rev == OMAP4430_ES2_0) emif_reset_phy(base); @@ -1206,7 +1191,7 @@ void dmm_init(u32 base) writel(lisa_map_regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0); - if (omap_revision() >= OMAP4460_ES1_0) { + if (lisa_map_regs->is_ma_present) { hw_lisa_map_regs = (struct dmm_lisa_map_regs *)MA_BASE; @@ -1264,7 +1249,7 @@ void dmm_init(u32 base) void sdram_init(void) { u32 in_sdram, size_prog, size_detect; - u32 omap_rev = omap_revision(); + u32 sdram_type = emif_sdram_type(); debug(">>sdram_init()\n"); @@ -1275,10 +1260,10 @@ void sdram_init(void) debug("in_sdram = %d\n", in_sdram); if (!(in_sdram || warm_reset())) { - if (omap_rev != OMAP5432_ES1_0) - bypass_dpll(&prcm->cm_clkmode_dpll_core); + if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2) + bypass_dpll((*prcm)->cm_clkmode_dpll_core); else - writel(CM_DLL_CTRL_NO_OVERRIDE, &prcm->cm_dll_ctrl); + writel(CM_DLL_CTRL_NO_OVERRIDE, (*prcm)->cm_dll_ctrl); } if (!in_sdram) @@ -1298,7 +1283,7 @@ void sdram_init(void) } /* for the shadow registers to take effect */ - if (omap_rev != OMAP5432_ES1_0) + if (sdram_type == EMIF_SDRAM_TYPE_LPDDR2) freq_update_core(); /* Do some testing after the init */ diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c index 9ef10bdf2d..05ff2e868f 100644 --- a/arch/arm/cpu/armv7/omap-common/hwinit-common.c +++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c @@ -32,6 +32,8 @@ #include <asm/arch/sys_proto.h> #include <asm/sizes.h> #include <asm/emif.h> +#include <asm/omap_common.h> +#include <linux/compiler.h> DECLARE_GLOBAL_DATA_PTR; @@ -79,12 +81,17 @@ u32 cortex_rev(void) void omap_rev_string(void) { u32 omap_rev = omap_revision(); + u32 soc_variant = (omap_rev & 0xF0000000) >> 28; u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16; u32 major_rev = (omap_rev & 0x00000F00) >> 8; u32 minor_rev = (omap_rev & 0x000000F0) >> 4; - printf("OMAP%x ES%x.%x\n", omap_variant, major_rev, - minor_rev); + if (soc_variant) + printf("OMAP"); + else + printf("DRA"); + printf("%x ES%x.%x\n", omap_variant, major_rev, + minor_rev); } #ifdef CONFIG_SPL_BUILD @@ -99,6 +106,10 @@ void spl_display_print(void) } #endif +void __weak srcomp_enable(void) +{ +} + /* * Routine: s_init * Description: Does early system init of watchdog, muxing, andclocks @@ -116,6 +127,8 @@ void spl_display_print(void) void s_init(void) { init_omap_revision(); + hw_data_init(); + #ifdef CONFIG_SPL_BUILD if (warm_reset() && (omap_revision() <= OMAP5430_ES1_0)) force_emif_self_refresh(); @@ -123,6 +136,7 @@ void s_init(void) watchdog_init(); set_mux_conf_regs(); #ifdef CONFIG_SPL_BUILD + srcomp_enable(); setup_clocks_for_console(); gd = &gdata; @@ -235,10 +249,7 @@ int checkboard(void) */ u32 get_device_type(void) { - struct omap_sys_ctrl_regs *ctrl = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - - return (readl(&ctrl->control_status) & + return (readl((*ctrl)->control_status) & (DEVICE_TYPE_MASK)) >> DEVICE_TYPE_SHIFT; } diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S index 358107776d..b933fe8437 100644 --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S @@ -26,6 +26,7 @@ * MA 02111-1307 USA */ +#include <config.h> #include <asm/arch/omap.h> #include <asm/arch/spl.h> #include <linux/linkage.h> diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c index 36bea5f94c..507f6873e9 100644 --- a/arch/arm/cpu/armv7/omap-common/timer.c +++ b/arch/arm/cpu/armv7/omap-common/timer.c @@ -34,6 +34,7 @@ #include <common.h> #include <asm/io.h> +#include <asm/arch/cpu.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds index 9979c30853..efae381bdb 100644 --- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds +++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds @@ -48,10 +48,6 @@ SECTIONS . = ALIGN(4); .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram - .u_boot_list : { - #include <u-boot.lst> - } - . = ALIGN(4); __image_copy_end = .; _end = .; @@ -62,6 +58,6 @@ SECTIONS __bss_start = .; *(.bss*) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } >.sdram } diff --git a/arch/arm/cpu/armv7/omap-common/vc.c b/arch/arm/cpu/armv7/omap-common/vc.c index a045b77180..e6e5f7893c 100644 --- a/arch/arm/cpu/armv7/omap-common/vc.c +++ b/arch/arm/cpu/armv7/omap-common/vc.c @@ -81,13 +81,13 @@ void omap_vc_init(u16 speed_khz) cycles_low -= 7; val = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) | (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT); - writel(val, &prcm->prm_vc_cfg_i2c_clk); + writel(val, (*prcm)->prm_vc_cfg_i2c_clk); val = CONFIG_OMAP_VC_I2C_HS_MCODE << PRM_VC_CFG_I2C_MODE_HSMCODE_SHIFT; /* No HS mode for now */ val &= ~PRM_VC_CFG_I2C_MODE_HSMODEEN_BIT; - writel(val, &prcm->prm_vc_cfg_i2c_mode); + writel(val, (*prcm)->prm_vc_cfg_i2c_mode); } /** @@ -113,14 +113,15 @@ int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data) reg_val = sa << PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT | reg_addr << PRM_VC_VAL_BYPASS_REGADDR_SHIFT | reg_data << PRM_VC_VAL_BYPASS_DATA_SHIFT; - writel(reg_val, &prcm->prm_vc_val_bypass); + writel(reg_val, (*prcm)->prm_vc_val_bypass); /* Signal VC to send data */ - writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT, &prcm->prm_vc_val_bypass); + writel(reg_val | PRM_VC_VAL_BYPASS_VALID_BIT, + (*prcm)->prm_vc_val_bypass); /* Wait on VC to complete transmission */ do { - reg_val = readl(&prcm->prm_vc_val_bypass) & + reg_val = readl((*prcm)->prm_vc_val_bypass) & PRM_VC_VAL_BYPASS_VALID_BIT; if (!reg_val) break; diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 89c587e310..c6d9a425a5 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -98,11 +98,11 @@ int board_mmc_init(bd_t *bis) { switch (spl_boot_device()) { case BOOT_DEVICE_MMC1: - omap_mmc_init(0, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); break; case BOOT_DEVICE_MMC2: case BOOT_DEVICE_MMC2_2: - omap_mmc_init(1, 0, 0); + omap_mmc_init(1, 0, 0, -1, -1); break; } return 0; @@ -110,7 +110,7 @@ int board_mmc_init(bd_t *bis) void spl_board_init(void) { -#ifdef CONFIG_SPL_NAND_SUPPORT +#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT) gpmc_init(); #endif #ifdef CONFIG_SPL_I2C_SUPPORT diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile index 83160a28f3..40808d18ff 100644 --- a/arch/arm/cpu/armv7/omap4/Makefile +++ b/arch/arm/cpu/armv7/omap4/Makefile @@ -27,8 +27,9 @@ LIB = $(obj)lib$(SOC).o COBJS += sdram_elpida.o COBJS += hwinit.o -COBJS += clocks.o COBJS += emif.o +COBJS += prcm-regs.o +COBJS += hw_data.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c deleted file mode 100644 index 12c58033d2..0000000000 --- a/arch/arm/cpu/armv7/omap4/clocks.c +++ /dev/null @@ -1,517 +0,0 @@ -/* - * - * Clock initialization for OMAP4 - * - * (C) Copyright 2010 - * Texas Instruments, <www.ti.com> - * - * Aneesh V <aneesh@ti.com> - * - * Based on previous work by: - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * Rajendra Nayak <rnayak@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <asm/omap_common.h> -#include <asm/gpio.h> -#include <asm/arch/clocks.h> -#include <asm/arch/sys_proto.h> -#include <asm/utils.h> -#include <asm/omap_gpio.h> - -#ifndef CONFIG_SPL_BUILD -/* - * printing to console doesn't work unless - * this code is executed from SPL - */ -#define printf(fmt, args...) -#define puts(s) -#endif /* !CONFIG_SPL_BUILD */ - -struct omap4_prcm_regs *const prcm = (struct omap4_prcm_regs *)0x4A004100; - -const u32 sys_clk_array[8] = { - 12000000, /* 12 MHz */ - 13000000, /* 13 MHz */ - 16800000, /* 16.8 MHz */ - 19200000, /* 19.2 MHz */ - 26000000, /* 26 MHz */ - 27000000, /* 27 MHz */ - 38400000, /* 38.4 MHz */ -}; - -/* - * The M & N values in the following tables are created using the - * following tool: - * tools/omap/clocks_get_m_n.c - * Please use this tool for creating the table for any new frequency. - */ - -/* dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF */ -static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = { - {175, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {700, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {125, 2, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {401, 10, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {350, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {700, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {638, 34, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */ -static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { - {200, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {800, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {619, 12, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {125, 2, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {800, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {125, 5, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* dpll locked at 1200 MHz - MPU clk at 600 MHz */ -static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = { - {50, 0, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {600, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {250, 6, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {125, 3, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {300, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {200, 8, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {125, 7, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = { - {200, 2, 1, 5, 8, 4, 6, 5}, /* 12 MHz */ - {800, 12, 1, 5, 8, 4, 6, 5}, /* 13 MHz */ - {619, 12, 1, 5, 8, 4, 6, 5}, /* 16.8 MHz */ - {125, 2, 1, 5, 8, 4, 6, 5}, /* 19.2 MHz */ - {400, 12, 1, 5, 8, 4, 6, 5}, /* 26 MHz */ - {800, 26, 1, 5, 8, 4, 6, 5}, /* 27 MHz */ - {125, 5, 1, 5, 8, 4, 6, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = { - {127, 1, 1, 5, 8, 4, 6, 5}, /* 12 MHz */ - {762, 12, 1, 5, 8, 4, 6, 5}, /* 13 MHz */ - {635, 13, 1, 5, 8, 4, 6, 5}, /* 16.8 MHz */ - {635, 15, 1, 5, 8, 4, 6, 5}, /* 19.2 MHz */ - {381, 12, 1, 5, 8, 4, 6, 5}, /* 26 MHz */ - {254, 8, 1, 5, 8, 4, 6, 5}, /* 27 MHz */ - {496, 24, 1, 5, 8, 4, 6, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = { - {200, 2, 2, 5, 8, 4, 6, 5}, /* 12 MHz */ - {800, 12, 2, 5, 8, 4, 6, 5}, /* 13 MHz */ - {619, 12, 2, 5, 8, 4, 6, 5}, /* 16.8 MHz */ - {125, 2, 2, 5, 8, 4, 6, 5}, /* 19.2 MHz */ - {400, 12, 2, 5, 8, 4, 6, 5}, /* 26 MHz */ - {800, 26, 2, 5, 8, 4, 6, 5}, /* 27 MHz */ - {125, 5, 2, 5, 8, 4, 6, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = { - {64, 0, 8, 6, 12, 9, 4, 5}, /* 12 MHz */ - {768, 12, 8, 6, 12, 9, 4, 5}, /* 13 MHz */ - {320, 6, 8, 6, 12, 9, 4, 5}, /* 16.8 MHz */ - {40, 0, 8, 6, 12, 9, 4, 5}, /* 19.2 MHz */ - {384, 12, 8, 6, 12, 9, 4, 5}, /* 26 MHz */ - {256, 8, 8, 6, 12, 9, 4, 5}, /* 27 MHz */ - {20, 0, 8, 6, 12, 9, 4, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = { - {931, 11, -1, -1, 4, 7, -1, -1}, /* 12 MHz */ - {931, 12, -1, -1, 4, 7, -1, -1}, /* 13 MHz */ - {665, 11, -1, -1, 4, 7, -1, -1}, /* 16.8 MHz */ - {727, 14, -1, -1, 4, 7, -1, -1}, /* 19.2 MHz */ - {931, 25, -1, -1, 4, 7, -1, -1}, /* 26 MHz */ - {931, 26, -1, -1, 4, 7, -1, -1}, /* 27 MHz */ - {291, 11, -1, -1, 4, 7, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with sys_clk as source */ -static const struct dpll_params - abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { - {49, 5, 1, 1, -1, -1, -1, -1}, /* 12 MHz */ - {68, 8, 1, 1, -1, -1, -1, -1}, /* 13 MHz */ - {35, 5, 1, 1, -1, -1, -1, -1}, /* 16.8 MHz */ - {46, 8, 1, 1, -1, -1, -1, -1}, /* 19.2 MHz */ - {34, 8, 1, 1, -1, -1, -1, -1}, /* 26 MHz */ - {29, 7, 1, 1, -1, -1, -1, -1}, /* 27 MHz */ - {64, 24, 1, 1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with 32K clock as source */ -static const struct dpll_params abe_dpll_params_32k_196608khz = { - 750, 0, 1, 1, -1, -1, -1, -1 -}; - -static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { - {80, 0, 2, -1, -1, -1, -1, -1}, /* 12 MHz */ - {960, 12, 2, -1, -1, -1, -1, -1}, /* 13 MHz */ - {400, 6, 2, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {50, 0, 2, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {480, 12, 2, -1, -1, -1, -1, -1}, /* 26 MHz */ - {320, 8, 2, -1, -1, -1, -1, -1}, /* 27 MHz */ - {25, 0, 2, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -void setup_post_dividers(u32 *const base, const struct dpll_params *params) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - /* Setup post-dividers */ - if (params->m2 >= 0) - writel(params->m2, &dpll_regs->cm_div_m2_dpll); - if (params->m3 >= 0) - writel(params->m3, &dpll_regs->cm_div_m3_dpll); - if (params->m4 >= 0) - writel(params->m4, &dpll_regs->cm_div_m4_dpll); - if (params->m5 >= 0) - writel(params->m5, &dpll_regs->cm_div_m5_dpll); - if (params->m6 >= 0) - writel(params->m6, &dpll_regs->cm_div_m6_dpll); - if (params->m7 >= 0) - writel(params->m7, &dpll_regs->cm_div_m7_dpll); -} - -/* - * Lock MPU dpll - * - * Resulting MPU frequencies: - * 4430 ES1.0 : 600 MHz - * 4430 ES2.x : 792 MHz (OPP Turbo) - * 4460 : 920 MHz (OPP Turbo) - DCC disabled - */ -const struct dpll_params *get_mpu_dpll_params(void) -{ - u32 omap_rev, sysclk_ind; - - omap_rev = omap_revision(); - sysclk_ind = get_sys_clk_index(); - - if (omap_rev == OMAP4430_ES1_0) - return &mpu_dpll_params_1200mhz[sysclk_ind]; - else if (omap_rev < OMAP4460_ES1_0) - return &mpu_dpll_params_1600mhz[sysclk_ind]; - else - return &mpu_dpll_params_1400mhz[sysclk_ind]; -} - -const struct dpll_params *get_core_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - - switch (omap_revision()) { - case OMAP4430_ES1_0: - return &core_dpll_params_es1_1524mhz[sysclk_ind]; - case OMAP4430_ES2_0: - case OMAP4430_SILICON_ID_INVALID: - /* safest */ - return &core_dpll_params_es2_1600mhz_ddr200mhz[sysclk_ind]; - default: - return &core_dpll_params_1600mhz[sysclk_ind]; - } -} - - -const struct dpll_params *get_per_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &per_dpll_params_1536mhz[sysclk_ind]; -} - -const struct dpll_params *get_iva_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &iva_dpll_params_1862mhz[sysclk_ind]; -} - -const struct dpll_params *get_usb_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &usb_dpll_params_1920mhz[sysclk_ind]; -} - -const struct dpll_params *get_abe_dpll_params(void) -{ -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - u32 sysclk_ind = get_sys_clk_index(); - return &abe_dpll_params_sysclk_196608khz[sysclk_ind]; -#else - return &abe_dpll_params_32k_196608khz; -#endif -} - -/* - * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva - * We set the maximum voltages allowed here because Smart-Reflex is not - * enabled in bootloader. Voltage initialization in the kernel will set - * these to the nominal values after enabling Smart-Reflex - */ -void scale_vcores(void) -{ - u32 volt, omap_rev; - - omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); - - omap_rev = omap_revision(); - - /* - * Scale Voltage rails: - * 1. VDD_CORE - * 3. VDD_MPU - * 3. VDD_IVA - */ - if (omap_rev < OMAP4460_ES1_0) { - /* - * OMAP4430: - * VDD_CORE = TWL6030 VCORE3 - * VDD_MPU = TWL6030 VCORE1 - * VDD_IVA = TWL6030 VCORE2 - */ - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE3, volt); - - /* - * note on VDD_MPU: - * Setting a high voltage for Nitro mode as smart reflex is not - * enabled. We use the maximum possible value in the AVS range - * because the next higher voltage in the discrete range - * (code >= 0b111010) is way too high. - */ - volt = 1325; - do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt); - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt); - - } else { - /* - * OMAP4460: - * VDD_CORE = TWL6030 VCORE1 - * VDD_MPU = TPS62361 - * VDD_IVA = TWL6030 VCORE2 - */ - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt); - /* TPS62361 */ - volt = 1203; - do_scale_tps62361(TPS62361_VSEL0_GPIO, - TPS62361_REG_ADDR_SET1, volt); - /* VCORE 2 - supplies vdd_iva */ - volt = 1200; - do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt); - } -} - -u32 get_offset_code(u32 offset) -{ - u32 offset_code, step = 12660; /* 12.66 mV represented in uV */ - - if (omap_revision() == OMAP4430_ES1_0) - offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV; - else - offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV; - - offset_code = (offset + step - 1) / step; - - /* The code starts at 1 not 0 */ - return ++offset_code; -} - -/* - * Enable essential clock domains, modules and - * do some additional special settings needed - */ -void enable_basic_clocks(void) -{ - u32 *const clk_domains_essential[] = { - &prcm->cm_l4per_clkstctrl, - &prcm->cm_l3init_clkstctrl, - &prcm->cm_memif_clkstctrl, - &prcm->cm_l4cfg_clkstctrl, - 0 - }; - - u32 *const clk_modules_hw_auto_essential[] = { - &prcm->cm_l3_2_gpmc_clkctrl, - &prcm->cm_memif_emif_1_clkctrl, - &prcm->cm_memif_emif_2_clkctrl, - &prcm->cm_l4cfg_l4_cfg_clkctrl, - &prcm->cm_wkup_gpio1_clkctrl, - &prcm->cm_l4per_gpio2_clkctrl, - &prcm->cm_l4per_gpio3_clkctrl, - &prcm->cm_l4per_gpio4_clkctrl, - &prcm->cm_l4per_gpio5_clkctrl, - &prcm->cm_l4per_gpio6_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_essential[] = { - &prcm->cm_wkup_gptimer1_clkctrl, - &prcm->cm_l3init_hsmmc1_clkctrl, - &prcm->cm_l3init_hsmmc2_clkctrl, - &prcm->cm_l4per_gptimer2_clkctrl, - &prcm->cm_wkup_wdtimer2_clkctrl, - &prcm->cm_l4per_uart3_clkctrl, - 0 - }; - - /* Enable optional additional functional clock for GPIO4 */ - setbits_le32(&prcm->cm_l4per_gpio4_clkctrl, - GPIO4_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable 96 MHz clock for MMC1 & MMC2 */ - setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - - /* Select 32KHz clock as the source of GPTIMER1 */ - setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl, - GPTIMER1_CLKCTRL_CLKSEL_MASK); - - /* Enable optional 48M functional clock for USB PHY */ - setbits_le32(&prcm->cm_l3init_usbphy_clkctrl, - USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK); - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -void enable_basic_uboot_clocks(void) -{ - u32 *const clk_domains_essential[] = { - 0 - }; - - u32 *const clk_modules_hw_auto_essential[] = { - &prcm->cm_l3init_hsusbotg_clkctrl, - &prcm->cm_l3init_usbphy_clkctrl, - &prcm->cm_l3init_usbphy_clkctrl, - &prcm->cm_clksel_usb_60mhz, - &prcm->cm_l3init_hsusbtll_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_essential[] = { - &prcm->cm_l4per_mcspi1_clkctrl, - &prcm->cm_l4per_i2c1_clkctrl, - &prcm->cm_l4per_i2c2_clkctrl, - &prcm->cm_l4per_i2c3_clkctrl, - &prcm->cm_l4per_i2c4_clkctrl, - &prcm->cm_l3init_hsusbhost_clkctrl, - 0 - }; - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -/* - * Enable non-essential clock domains, modules and - * do some additional special settings needed - */ -void enable_non_essential_clocks(void) -{ - u32 *const clk_domains_non_essential[] = { - &prcm->cm_mpu_m3_clkstctrl, - &prcm->cm_ivahd_clkstctrl, - &prcm->cm_dsp_clkstctrl, - &prcm->cm_dss_clkstctrl, - &prcm->cm_sgx_clkstctrl, - &prcm->cm1_abe_clkstctrl, - &prcm->cm_c2c_clkstctrl, - &prcm->cm_cam_clkstctrl, - &prcm->cm_dss_clkstctrl, - &prcm->cm_sdma_clkstctrl, - 0 - }; - - u32 *const clk_modules_hw_auto_non_essential[] = { - &prcm->cm_l3instr_l3_3_clkctrl, - &prcm->cm_l3instr_l3_instr_clkctrl, - &prcm->cm_l3instr_intrconn_wp1_clkctrl, - &prcm->cm_l3init_hsi_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_non_essential[] = { - &prcm->cm1_abe_aess_clkctrl, - &prcm->cm1_abe_pdm_clkctrl, - &prcm->cm1_abe_dmic_clkctrl, - &prcm->cm1_abe_mcasp_clkctrl, - &prcm->cm1_abe_mcbsp1_clkctrl, - &prcm->cm1_abe_mcbsp2_clkctrl, - &prcm->cm1_abe_mcbsp3_clkctrl, - &prcm->cm1_abe_slimbus_clkctrl, - &prcm->cm1_abe_timer5_clkctrl, - &prcm->cm1_abe_timer6_clkctrl, - &prcm->cm1_abe_timer7_clkctrl, - &prcm->cm1_abe_timer8_clkctrl, - &prcm->cm1_abe_wdt3_clkctrl, - &prcm->cm_l4per_gptimer9_clkctrl, - &prcm->cm_l4per_gptimer10_clkctrl, - &prcm->cm_l4per_gptimer11_clkctrl, - &prcm->cm_l4per_gptimer3_clkctrl, - &prcm->cm_l4per_gptimer4_clkctrl, - &prcm->cm_l4per_hdq1w_clkctrl, - &prcm->cm_l4per_mcbsp4_clkctrl, - &prcm->cm_l4per_mcspi2_clkctrl, - &prcm->cm_l4per_mcspi3_clkctrl, - &prcm->cm_l4per_mcspi4_clkctrl, - &prcm->cm_l4per_mmcsd3_clkctrl, - &prcm->cm_l4per_mmcsd4_clkctrl, - &prcm->cm_l4per_mmcsd5_clkctrl, - &prcm->cm_l4per_uart1_clkctrl, - &prcm->cm_l4per_uart2_clkctrl, - &prcm->cm_l4per_uart4_clkctrl, - &prcm->cm_wkup_keyboard_clkctrl, - &prcm->cm_wkup_wdtimer2_clkctrl, - &prcm->cm_cam_iss_clkctrl, - &prcm->cm_cam_fdif_clkctrl, - &prcm->cm_dss_dss_clkctrl, - &prcm->cm_sgx_sgx_clkctrl, - 0 - }; - - /* Enable optional functional clock for ISS */ - setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable all optional functional clocks of DSS */ - setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); - - do_enable_clocks(clk_domains_non_essential, - clk_modules_hw_auto_non_essential, - clk_modules_explicit_en_non_essential, - 0); - - /* Put camera module in no sleep mode */ - clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK, - CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << - MODULE_CLKCTRL_MODULEMODE_SHIFT); -} diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c new file mode 100644 index 0000000000..7551b9861e --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -0,0 +1,491 @@ +/* + * + * HW data initialization for OMAP4 + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/omap.h> +#include <asm/arch/sys_proto.h> +#include <asm/omap_common.h> +#include <asm/arch/clocks.h> +#include <asm/omap_gpio.h> +#include <asm/io.h> + +struct prcm_regs const **prcm = + (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; +struct dplls const **dplls_data = + (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; +struct vcores_data const **omap_vcores = + (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; +struct omap_sys_ctrl_regs const **ctrl = + (struct omap_sys_ctrl_regs const **)OMAP4_SRAM_SCRATCH_SYS_CTRL; + +/* + * The M & N values in the following tables are created using the + * following tool: + * tools/omap/clocks_get_m_n.c + * Please use this tool for creating the table for any new frequency. + */ + +/* + * dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF + * OMAP4460 OPP_NOM frequency + */ +static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = { + {175, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {700, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {401, 10, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {350, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {700, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {638, 34, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* + * dpll locked at 1600 MHz - MPU clk at 800 MHz(OPP Turbo 4430) + * OMAP4430 OPP_TURBO frequency + */ +static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { + {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {800, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {619, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {800, 26, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {125, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* + * dpll locked at 1200 MHz - MPU clk at 600 MHz + * OMAP4430 OPP_NOM frequency + */ +static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = { + {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {600, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {250, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {300, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {200, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {125, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OMAP4460 OPP_NOM frequency */ +static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = { + {200, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ + {800, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ + {619, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 2, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ + {800, 26, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ + {125, 5, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OMAP4430 ES1 OPP_NOM frequency */ +static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = { + {127, 1, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ + {762, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ + {635, 13, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {635, 15, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {381, 12, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ + {254, 8, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ + {496, 24, 1, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OMAP4430 ES2.X OPP_NOM frequency */ +static const struct dpll_params + core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = { + {200, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 12 MHz */ + {800, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 13 MHz */ + {619, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 2, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 26 MHz */ + {800, 26, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1}, /* 27 MHz */ + {125, 5, 2, 5, 8, 4, 6, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = { + {64, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 12 MHz */ + {768, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 13 MHz */ + {320, 6, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 16.8 MHz */ + {40, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 19.2 MHz */ + {384, 12, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 26 MHz */ + {256, 8, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1}, /* 27 MHz */ + {20, 0, 8, 6, 12, 9, 4, 5, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = { + {931, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {931, 12, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {665, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {727, 14, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {931, 25, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {931, 26, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {291, 11, -1, -1, 4, 7, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with sys_clk as source */ +static const struct dpll_params + abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { + {49, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {68, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {29, 7, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with 32K clock as source */ +static const struct dpll_params abe_dpll_params_32k_196608khz = { + 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1 +}; + +static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { + {80, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {960, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {50, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {320, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {25, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +struct dplls omap4430_dplls_es1 = { + .mpu = mpu_dpll_params_1200mhz, + .core = core_dpll_params_es1_1524mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls omap4430_dplls = { + .mpu = mpu_dpll_params_1200mhz, + .core = core_dpll_params_1600mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls omap4460_dplls = { + .mpu = mpu_dpll_params_1400mhz, + .core = core_dpll_params_1600mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct pmic_data twl6030_4430es1 = { + .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV, + .step = 12660, /* 10 mV represented in uV */ + /* The code starts at 1 not 0 */ + .start_code = 1, +}; + +struct pmic_data twl6030 = { + .base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV, + .step = 12660, /* 10 mV represented in uV */ + /* The code starts at 1 not 0 */ + .start_code = 1, +}; + +struct pmic_data tps62361 = { + .base_offset = TPS62361_BASE_VOLT_MV, + .step = 10000, /* 10 mV represented in uV */ + .start_code = 0, + .gpio = TPS62361_VSEL0_GPIO, + .gpio_en = 1 +}; + +struct vcores_data omap4430_volts_es1 = { + .mpu.value = 1325, + .mpu.addr = SMPS_REG_ADDR_VCORE1, + .mpu.pmic = &twl6030_4430es1, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE3, + .core.pmic = &twl6030_4430es1, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &twl6030_4430es1, +}; + +struct vcores_data omap4430_volts = { + .mpu.value = 1325, + .mpu.addr = SMPS_REG_ADDR_VCORE1, + .mpu.pmic = &twl6030, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE3, + .core.pmic = &twl6030, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &twl6030, +}; + +struct vcores_data omap4460_volts = { + .mpu.value = 1203, + .mpu.addr = TPS62361_REG_ADDR_SET1, + .mpu.pmic = &tps62361, + + .core.value = 1200, + .core.addr = SMPS_REG_ADDR_VCORE1, + .core.pmic = &tps62361, + + .mm.value = 1200, + .mm.addr = SMPS_REG_ADDR_VCORE2, + .mm.pmic = &tps62361, +}; + +/* + * Enable essential clock domains, modules and + * do some additional special settings needed + */ +void enable_basic_clocks(void) +{ + u32 const clk_domains_essential[] = { + (*prcm)->cm_l4per_clkstctrl, + (*prcm)->cm_l3init_clkstctrl, + (*prcm)->cm_memif_clkstctrl, + (*prcm)->cm_l4cfg_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3_gpmc_clkctrl, + (*prcm)->cm_memif_emif_1_clkctrl, + (*prcm)->cm_memif_emif_2_clkctrl, + (*prcm)->cm_l4cfg_l4_cfg_clkctrl, + (*prcm)->cm_wkup_gpio1_clkctrl, + (*prcm)->cm_l4per_gpio2_clkctrl, + (*prcm)->cm_l4per_gpio3_clkctrl, + (*prcm)->cm_l4per_gpio4_clkctrl, + (*prcm)->cm_l4per_gpio5_clkctrl, + (*prcm)->cm_l4per_gpio6_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_wkup_gptimer1_clkctrl, + (*prcm)->cm_l3init_hsmmc1_clkctrl, + (*prcm)->cm_l3init_hsmmc2_clkctrl, + (*prcm)->cm_l4per_gptimer2_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_l4per_uart3_clkctrl, + 0 + }; + + /* Enable optional additional functional clock for GPIO4 */ + setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, + GPIO4_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable 96 MHz clock for MMC1 & MMC2 */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + + /* Select 32KHz clock as the source of GPTIMER1 */ + setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, + GPTIMER1_CLKCTRL_CLKSEL_MASK); + + /* Enable optional 48M functional clock for USB PHY */ + setbits_le32((*prcm)->cm_l3init_usbphy_clkctrl, + USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK); + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +void enable_basic_uboot_clocks(void) +{ + u32 const clk_domains_essential[] = { + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3init_hsusbotg_clkctrl, + (*prcm)->cm_l3init_usbphy_clkctrl, + (*prcm)->cm_l3init_usbphy_clkctrl, + (*prcm)->cm_clksel_usb_60mhz, + (*prcm)->cm_l3init_hsusbtll_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_l4per_mcspi1_clkctrl, + (*prcm)->cm_l4per_i2c1_clkctrl, + (*prcm)->cm_l4per_i2c2_clkctrl, + (*prcm)->cm_l4per_i2c3_clkctrl, + (*prcm)->cm_l4per_i2c4_clkctrl, + (*prcm)->cm_l3init_hsusbhost_clkctrl, + 0 + }; + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +/* + * Enable non-essential clock domains, modules and + * do some additional special settings needed + */ +void enable_non_essential_clocks(void) +{ + u32 const clk_domains_non_essential[] = { + (*prcm)->cm_mpu_m3_clkstctrl, + (*prcm)->cm_ivahd_clkstctrl, + (*prcm)->cm_dsp_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sgx_clkstctrl, + (*prcm)->cm1_abe_clkstctrl, + (*prcm)->cm_c2c_clkstctrl, + (*prcm)->cm_cam_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sdma_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_non_essential[] = { + (*prcm)->cm_l3instr_l3_3_clkctrl, + (*prcm)->cm_l3instr_l3_instr_clkctrl, + (*prcm)->cm_l3instr_intrconn_wp1_clkctrl, + (*prcm)->cm_l3init_hsi_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_non_essential[] = { + (*prcm)->cm1_abe_aess_clkctrl, + (*prcm)->cm1_abe_pdm_clkctrl, + (*prcm)->cm1_abe_dmic_clkctrl, + (*prcm)->cm1_abe_mcasp_clkctrl, + (*prcm)->cm1_abe_mcbsp1_clkctrl, + (*prcm)->cm1_abe_mcbsp2_clkctrl, + (*prcm)->cm1_abe_mcbsp3_clkctrl, + (*prcm)->cm1_abe_slimbus_clkctrl, + (*prcm)->cm1_abe_timer5_clkctrl, + (*prcm)->cm1_abe_timer6_clkctrl, + (*prcm)->cm1_abe_timer7_clkctrl, + (*prcm)->cm1_abe_timer8_clkctrl, + (*prcm)->cm1_abe_wdt3_clkctrl, + (*prcm)->cm_l4per_gptimer9_clkctrl, + (*prcm)->cm_l4per_gptimer10_clkctrl, + (*prcm)->cm_l4per_gptimer11_clkctrl, + (*prcm)->cm_l4per_gptimer3_clkctrl, + (*prcm)->cm_l4per_gptimer4_clkctrl, + (*prcm)->cm_l4per_hdq1w_clkctrl, + (*prcm)->cm_l4per_mcbsp4_clkctrl, + (*prcm)->cm_l4per_mcspi2_clkctrl, + (*prcm)->cm_l4per_mcspi3_clkctrl, + (*prcm)->cm_l4per_mcspi4_clkctrl, + (*prcm)->cm_l4per_mmcsd3_clkctrl, + (*prcm)->cm_l4per_mmcsd4_clkctrl, + (*prcm)->cm_l4per_mmcsd5_clkctrl, + (*prcm)->cm_l4per_uart1_clkctrl, + (*prcm)->cm_l4per_uart2_clkctrl, + (*prcm)->cm_l4per_uart4_clkctrl, + (*prcm)->cm_wkup_keyboard_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_cam_iss_clkctrl, + (*prcm)->cm_cam_fdif_clkctrl, + (*prcm)->cm_dss_dss_clkctrl, + (*prcm)->cm_sgx_sgx_clkctrl, + 0 + }; + + /* Enable optional functional clock for ISS */ + setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable all optional functional clocks of DSS */ + setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); + + do_enable_clocks(clk_domains_non_essential, + clk_modules_hw_auto_non_essential, + clk_modules_explicit_en_non_essential, + 0); + + /* Put camera module in no sleep mode */ + clrsetbits_le32((*prcm)->cm_cam_clkstctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << + MODULE_CLKCTRL_MODULEMODE_SHIFT); +} + +void hw_data_init(void) +{ + u32 omap_rev = omap_revision(); + + (*prcm) = &omap4_prcm; + + switch (omap_rev) { + + case OMAP4430_ES1_0: + *dplls_data = &omap4430_dplls_es1; + *omap_vcores = &omap4430_volts_es1; + break; + + case OMAP4430_ES2_0: + case OMAP4430_ES2_1: + case OMAP4430_ES2_2: + case OMAP4430_ES2_3: + *dplls_data = &omap4430_dplls; + *omap_vcores = &omap4430_volts; + break; + + case OMAP4460_ES1_0: + case OMAP4460_ES1_1: + *dplls_data = &omap4460_dplls; + *omap_vcores = &omap4460_volts; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } + + *ctrl = &omap4_ctrl; +} diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c index f4123aaffc..2db517b1bf 100644 --- a/arch/arm/cpu/armv7/omap4/hwinit.c +++ b/arch/arm/cpu/armv7/omap4/hwinit.c @@ -57,10 +57,6 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx; void do_io_settings(void) { u32 lpddr2io; - struct control_lpddr2io_regs *lpddr2io_regs = - (struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE; - struct omap_sys_ctrl_regs *const ctrl = - (struct omap_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE; u32 omap4_rev = omap_revision(); @@ -72,20 +68,20 @@ void do_io_settings(void) lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN; /* EMIF1 */ - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0); - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1); + writel(lpddr2io, (*ctrl)->control_lpddr2io1_0); + writel(lpddr2io, (*ctrl)->control_lpddr2io1_1); /* No pull for GR10 as per hw team's recommendation */ writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, - &lpddr2io_regs->control_lpddr2io1_2); - writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3); + (*ctrl)->control_lpddr2io1_2); + writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io1_3); /* EMIF2 */ - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0); - writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1); + writel(lpddr2io, (*ctrl)->control_lpddr2io2_0); + writel(lpddr2io, (*ctrl)->control_lpddr2io2_1); /* No pull for GR10 as per hw team's recommendation */ writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK, - &lpddr2io_regs->control_lpddr2io2_2); - writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3); + (*ctrl)->control_lpddr2io2_2); + writel(CONTROL_LPDDR2IO_3_VAL, (*ctrl)->control_lpddr2io2_3); /* * Some of these settings (TRIM values) come from eFuse and are @@ -93,16 +89,16 @@ void do_io_settings(void) * calibration of the device. Do the software over-ride only if * the device is not correctly trimmed */ - if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) { + if (!(readl((*ctrl)->control_std_fuse_opp_bgap) & 0xFFFF)) { writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_iva_voltage_ctrl); + (*ctrl)->control_ldosram_iva_voltage_ctrl); writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_mpu_voltage_ctrl); + (*ctrl)->control_ldosram_mpu_voltage_ctrl); writel(LDOSRAM_VOLT_CTRL_OVERRIDE, - &ctrl->control_ldosram_core_voltage_ctrl); + (*ctrl)->control_ldosram_core_voltage_ctrl); } /* @@ -110,11 +106,11 @@ void do_io_settings(void) * i. unconditionally for all 4430 * ii. only if un-trimmed for 4460 */ - if (!readl(&ctrl->control_efuse_1)) - writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1); + if (!readl((*ctrl)->control_efuse_1)) + writel(CONTROL_EFUSE_1_OVERRIDE, (*ctrl)->control_efuse_1); - if ((omap4_rev < OMAP4460_ES1_0) || !readl(&ctrl->control_efuse_2)) - writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2); + if ((omap4_rev < OMAP4460_ES1_0) || !readl((*ctrl)->control_efuse_2)) + writel(CONTROL_EFUSE_2_OVERRIDE, (*ctrl)->control_efuse_2); } #endif /* CONFIG_SPL_BUILD */ diff --git a/arch/arm/cpu/armv7/omap4/prcm-regs.c b/arch/arm/cpu/armv7/omap4/prcm-regs.c new file mode 100644 index 0000000000..7225a301b1 --- /dev/null +++ b/arch/arm/cpu/armv7/omap4/prcm-regs.c @@ -0,0 +1,315 @@ +/* + * + * HW regs data for OMAP4 + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/omap_common.h> + +struct prcm_regs const omap4_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a004100, + .cm_clksel_abe = 0x4a004108, + .cm_dll_ctrl = 0x4a004110, + .cm_clkmode_dpll_core = 0x4a004120, + .cm_idlest_dpll_core = 0x4a004124, + .cm_autoidle_dpll_core = 0x4a004128, + .cm_clksel_dpll_core = 0x4a00412c, + .cm_div_m2_dpll_core = 0x4a004130, + .cm_div_m3_dpll_core = 0x4a004134, + .cm_div_m4_dpll_core = 0x4a004138, + .cm_div_m5_dpll_core = 0x4a00413c, + .cm_div_m6_dpll_core = 0x4a004140, + .cm_div_m7_dpll_core = 0x4a004144, + .cm_ssc_deltamstep_dpll_core = 0x4a004148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, + .cm_emu_override_dpll_core = 0x4a004150, + .cm_clkmode_dpll_mpu = 0x4a004160, + .cm_idlest_dpll_mpu = 0x4a004164, + .cm_autoidle_dpll_mpu = 0x4a004168, + .cm_clksel_dpll_mpu = 0x4a00416c, + .cm_div_m2_dpll_mpu = 0x4a004170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, + .cm_bypclk_dpll_mpu = 0x4a00419c, + .cm_clkmode_dpll_iva = 0x4a0041a0, + .cm_idlest_dpll_iva = 0x4a0041a4, + .cm_autoidle_dpll_iva = 0x4a0041a8, + .cm_clksel_dpll_iva = 0x4a0041ac, + .cm_div_m4_dpll_iva = 0x4a0041b8, + .cm_div_m5_dpll_iva = 0x4a0041bc, + .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, + .cm_bypclk_dpll_iva = 0x4a0041dc, + .cm_clkmode_dpll_abe = 0x4a0041e0, + .cm_idlest_dpll_abe = 0x4a0041e4, + .cm_autoidle_dpll_abe = 0x4a0041e8, + .cm_clksel_dpll_abe = 0x4a0041ec, + .cm_div_m2_dpll_abe = 0x4a0041f0, + .cm_div_m3_dpll_abe = 0x4a0041f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a004208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, + .cm_clkmode_dpll_ddrphy = 0x4a004220, + .cm_idlest_dpll_ddrphy = 0x4a004224, + .cm_autoidle_dpll_ddrphy = 0x4a004228, + .cm_clksel_dpll_ddrphy = 0x4a00422c, + .cm_div_m2_dpll_ddrphy = 0x4a004230, + .cm_div_m4_dpll_ddrphy = 0x4a004238, + .cm_div_m5_dpll_ddrphy = 0x4a00423c, + .cm_div_m6_dpll_ddrphy = 0x4a004240, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, + .cm_shadow_freq_config1 = 0x4a004260, + .cm_mpu_mpu_clkctrl = 0x4a004320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a004400, + .cm_dsp_dsp_clkctrl = 0x4a004420, + + /* cm1.abe */ + .cm1_abe_clkstctrl = 0x4a004500, + .cm1_abe_l4abe_clkctrl = 0x4a004520, + .cm1_abe_aess_clkctrl = 0x4a004528, + .cm1_abe_pdm_clkctrl = 0x4a004530, + .cm1_abe_dmic_clkctrl = 0x4a004538, + .cm1_abe_mcasp_clkctrl = 0x4a004540, + .cm1_abe_mcbsp1_clkctrl = 0x4a004548, + .cm1_abe_mcbsp2_clkctrl = 0x4a004550, + .cm1_abe_mcbsp3_clkctrl = 0x4a004558, + .cm1_abe_slimbus_clkctrl = 0x4a004560, + .cm1_abe_timer5_clkctrl = 0x4a004568, + .cm1_abe_timer6_clkctrl = 0x4a004570, + .cm1_abe_timer7_clkctrl = 0x4a004578, + .cm1_abe_timer8_clkctrl = 0x4a004580, + .cm1_abe_wdt3_clkctrl = 0x4a004588, + + /* cm2.ckgen */ + .cm_clksel_mpu_m3_iss_root = 0x4a008100, + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_scale_fclk = 0x4a008108, + .cm_core_dvfs_perf1 = 0x4a008110, + .cm_core_dvfs_perf2 = 0x4a008114, + .cm_core_dvfs_perf3 = 0x4a008118, + .cm_core_dvfs_perf4 = 0x4a00811c, + .cm_core_dvfs_current = 0x4a008124, + .cm_iva_dvfs_perf_tesla = 0x4a008128, + .cm_iva_dvfs_perf_ivahd = 0x4a00812c, + .cm_iva_dvfs_perf_abe = 0x4a008130, + .cm_iva_dvfs_current = 0x4a008138, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_m4_dpll_per = 0x4a008158, + .cm_div_m5_dpll_per = 0x4a00815c, + .cm_div_m6_dpll_per = 0x4a008160, + .cm_div_m7_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_emu_override_dpll_per = 0x4a008170, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_unipro = 0x4a0081c0, + .cm_idlest_dpll_unipro = 0x4a0081c4, + .cm_autoidle_dpll_unipro = 0x4a0081c8, + .cm_clksel_dpll_unipro = 0x4a0081cc, + .cm_div_m2_dpll_unipro = 0x4a0081d0, + .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, + .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, + + /* cm2.core */ + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_2_clkstctrl = 0x4a008800, + .cm_l3_2_dynamicdep = 0x4a008808, + .cm_l3_2_l3_2_clkctrl = 0x4a008820, + .cm_l3_gpmc_clkctrl = 0x4a008828, + .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_memif_emif_h1_clkctrl = 0x4a008b50, + .cm_memif_emif_h2_clkctrl = 0x4a008b58, + .cm_memif_dll_h_clkctrl = 0x4a008b60, + .cm_c2c_clkstctrl = 0x4a008c00, + .cm_c2c_staticdep = 0x4a008c04, + .cm_c2c_dynamicdep = 0x4a008c08, + .cm_c2c_sad2d_clkctrl = 0x4a008c20, + .cm_c2c_modem_icr_clkctrl = 0x4a008c28, + .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkct = 0x4a008e40, + .cm_ivahd_clkstctrl = 0x4a008f00, + + /* cm2.ivahd */ + .cm_ivahd_ivahd_clkctrl = 0x4a008f20, + .cm_ivahd_sl2_clkctrl = 0x4a008f28, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009000, + .cm_cam_iss_clkctrl = 0x4a009020, + .cm_cam_fdif_clkctrl = 0x4a009028, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009100, + .cm_dss_dss_clkctrl = 0x4a009120, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009200, + .cm_sgx_sgx_clkctrl = 0x4a009220, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009300, + .cm_l3init_hsmmc1_clkctrl = 0x4a009328, + .cm_l3init_hsmmc2_clkctrl = 0x4a009330, + .cm_l3init_hsi_clkctrl = 0x4a009338, + .cm_l3init_hsusbhost_clkctrl = 0x4a009358, + .cm_l3init_hsusbotg_clkctrl = 0x4a009360, + .cm_l3init_hsusbtll_clkctrl = 0x4a009368, + .cm_l3init_p1500_clkctrl = 0x4a009378, + .cm_l3init_fsusb_clkctrl = 0x4a0093d0, + .cm_l3init_usbphy_clkctrl = 0x4a0093e0, + + /* cm2.l4per */ + .cm_l4per_clkstctrl = 0x4a009400, + .cm_l4per_dynamicdep = 0x4a009408, + .cm_l4per_adc_clkctrl = 0x4a009420, + .cm_l4per_gptimer10_clkctrl = 0x4a009428, + .cm_l4per_gptimer11_clkctrl = 0x4a009430, + .cm_l4per_gptimer2_clkctrl = 0x4a009438, + .cm_l4per_gptimer3_clkctrl = 0x4a009440, + .cm_l4per_gptimer4_clkctrl = 0x4a009448, + .cm_l4per_gptimer9_clkctrl = 0x4a009450, + .cm_l4per_elm_clkctrl = 0x4a009458, + .cm_l4per_gpio2_clkctrl = 0x4a009460, + .cm_l4per_gpio3_clkctrl = 0x4a009468, + .cm_l4per_gpio4_clkctrl = 0x4a009470, + .cm_l4per_gpio5_clkctrl = 0x4a009478, + .cm_l4per_gpio6_clkctrl = 0x4a009480, + .cm_l4per_hdq1w_clkctrl = 0x4a009488, + .cm_l4per_hecc1_clkctrl = 0x4a009490, + .cm_l4per_hecc2_clkctrl = 0x4a009498, + .cm_l4per_i2c1_clkctrl = 0x4a0094a0, + .cm_l4per_i2c2_clkctrl = 0x4a0094a8, + .cm_l4per_i2c3_clkctrl = 0x4a0094b0, + .cm_l4per_i2c4_clkctrl = 0x4a0094b8, + .cm_l4per_l4per_clkctrl = 0x4a0094c0, + .cm_l4per_mcasp2_clkctrl = 0x4a0094d0, + .cm_l4per_mcasp3_clkctrl = 0x4a0094d8, + .cm_l4per_mcbsp4_clkctrl = 0x4a0094e0, + .cm_l4per_mgate_clkctrl = 0x4a0094e8, + .cm_l4per_mcspi1_clkctrl = 0x4a0094f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0094f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009500, + .cm_l4per_mcspi4_clkctrl = 0x4a009508, + .cm_l4per_mmcsd3_clkctrl = 0x4a009520, + .cm_l4per_mmcsd4_clkctrl = 0x4a009528, + .cm_l4per_msprohg_clkctrl = 0x4a009530, + .cm_l4per_slimbus2_clkctrl = 0x4a009538, + .cm_l4per_uart1_clkctrl = 0x4a009540, + .cm_l4per_uart2_clkctrl = 0x4a009548, + .cm_l4per_uart3_clkctrl = 0x4a009550, + .cm_l4per_uart4_clkctrl = 0x4a009558, + .cm_l4per_mmcsd5_clkctrl = 0x4a009560, + .cm_l4per_i2c5_clkctrl = 0x4a009568, + .cm_l4sec_clkstctrl = 0x4a009580, + .cm_l4sec_staticdep = 0x4a009584, + .cm_l4sec_dynamicdep = 0x4a009588, + .cm_l4sec_aes1_clkctrl = 0x4a0095a0, + .cm_l4sec_aes2_clkctrl = 0x4a0095a8, + .cm_l4sec_des3des_clkctrl = 0x4a0095b0, + .cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8, + .cm_l4sec_rng_clkctrl = 0x4a0095c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0095c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0095d8, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4a30610c, + .cm_sys_clksel = 0x4a306110, + .cm_wkup_clkstctrl = 0x4a307800, + .cm_wkup_l4wkup_clkctrl = 0x4a307820, + .cm_wkup_wdtimer1_clkctrl = 0x4a307828, + .cm_wkup_wdtimer2_clkctrl = 0x4a307830, + .cm_wkup_gpio1_clkctrl = 0x4a307838, + .cm_wkup_gptimer1_clkctrl = 0x4a307840, + .cm_wkup_gptimer12_clkctrl = 0x4a307848, + .cm_wkup_synctimer_clkctrl = 0x4a307850, + .cm_wkup_usim_clkctrl = 0x4a307858, + .cm_wkup_sarram_clkctrl = 0x4a307860, + .cm_wkup_keyboard_clkctrl = 0x4a307878, + .cm_wkup_rtc_clkctrl = 0x4a307880, + .cm_wkup_bandgap_clkctrl = 0x4a307888, + .prm_vc_val_bypass = 0x4a307ba0, + .prm_vc_cfg_channel = 0x4a307ba4, + .prm_vc_cfg_i2c_mode = 0x4a307ba8, + .prm_vc_cfg_i2c_clk = 0x4a307bac, +}; + +struct omap_sys_ctrl_regs const omap4_ctrl = { + .control_id_code = 0x4A002204, + .control_std_fuse_opp_bgap = 0x4a002260, + .control_status = 0x4a0022c4, + .control_ldosram_iva_voltage_ctrl = 0x4A002320, + .control_ldosram_mpu_voltage_ctrl = 0x4A002324, + .control_ldosram_core_voltage_ctrl = 0x4A002328, + .control_pbiaslite = 0x4A100600, + .control_lpddr2io1_0 = 0x4A100638, + .control_lpddr2io1_1 = 0x4A10063C, + .control_lpddr2io1_2 = 0x4A100640, + .control_lpddr2io1_3 = 0x4A100644, + .control_lpddr2io2_0 = 0x4A100648, + .control_lpddr2io2_1 = 0x4A10064C, + .control_lpddr2io2_2 = 0x4A100650, + .control_lpddr2io2_3 = 0x4A100654, + .control_efuse_1 = 0x4A100700, + .control_efuse_2 = 0x4A100704, +}; diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c index b9128faa56..20fc55216a 100644 --- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c +++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c @@ -90,21 +90,28 @@ const struct emif_regs emif_regs_elpida_400_mhz_2cs = { .emif_ddr_phy_ctlr_1 = 0x049ff418 }; -/* Dummy registers for OMAP44xx */ -const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG]; - const struct dmm_lisa_map_regs lisa_map_2G_x_1_x_2 = { .dmm_lisa_map_0 = 0xFF020100, .dmm_lisa_map_1 = 0, .dmm_lisa_map_2 = 0, - .dmm_lisa_map_3 = 0x80540300 + .dmm_lisa_map_3 = 0x80540300, + .is_ma_present = 0x0 }; const struct dmm_lisa_map_regs lisa_map_2G_x_2_x_2 = { .dmm_lisa_map_0 = 0xFF020100, .dmm_lisa_map_1 = 0, .dmm_lisa_map_2 = 0, - .dmm_lisa_map_3 = 0x80640300 + .dmm_lisa_map_3 = 0x80640300, + .is_ma_present = 0x0 +}; + +const struct dmm_lisa_map_regs ma_lisa_map_2G_x_2_x_2 = { + .dmm_lisa_map_0 = 0xFF020100, + .dmm_lisa_map_1 = 0, + .dmm_lisa_map_2 = 0, + .dmm_lisa_map_3 = 0x80640300, + .is_ma_present = 0x1 }; static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) @@ -129,8 +136,10 @@ static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs if (omap_rev == OMAP4430_ES1_0) *dmm_lisa_regs = &lisa_map_2G_x_1_x_2; - else + else if (omap_rev < OMAP4460_ES1_0) *dmm_lisa_regs = &lisa_map_2G_x_2_x_2; + else + *dmm_lisa_regs = &ma_lisa_map_2G_x_2_x_2; } void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) @@ -284,3 +293,16 @@ void emif_get_device_timings(u32 emif_nr, __attribute__((weak, alias("emif_get_device_timings_sdp"))); #endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */ + +const struct lpddr2_mr_regs mr_regs = { + .mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3, + .mr2 = 0x4, + .mr3 = -1, + .mr10 = MR10_ZQ_ZQINIT, + .mr16 = MR16_REF_FULL_ARRAY +}; + +void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs) +{ + *regs = &mr_regs; +} diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile index 9b261c4df2..ce00e2c3c5 100644 --- a/arch/arm/cpu/armv7/omap5/Makefile +++ b/arch/arm/cpu/armv7/omap5/Makefile @@ -26,9 +26,10 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o COBJS += hwinit.o -COBJS += clocks.o COBJS += emif.o COBJS += sdram.o +COBJS += prcm-regs.o +COBJS += hw_data.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c deleted file mode 100644 index eecfbade35..0000000000 --- a/arch/arm/cpu/armv7/omap5/clocks.c +++ /dev/null @@ -1,494 +0,0 @@ -/* - * - * Clock initialization for OMAP5 - * - * (C) Copyright 2010 - * Texas Instruments, <www.ti.com> - * - * Aneesh V <aneesh@ti.com> - * Sricharan R <r.sricharan@ti.com> - * - * Based on previous work by: - * Santosh Shilimkar <santosh.shilimkar@ti.com> - * Rajendra Nayak <rnayak@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <asm/omap_common.h> -#include <asm/arch/clocks.h> -#include <asm/arch/sys_proto.h> -#include <asm/utils.h> -#include <asm/omap_gpio.h> - -#ifndef CONFIG_SPL_BUILD -/* - * printing to console doesn't work unless - * this code is executed from SPL - */ -#define printf(fmt, args...) -#define puts(s) -#endif - -struct omap5_prcm_regs *const prcm = (struct omap5_prcm_regs *)0x4A004100; - -const u32 sys_clk_array[8] = { - 12000000, /* 12 MHz */ - 0, /* NA */ - 16800000, /* 16.8 MHz */ - 19200000, /* 19.2 MHz */ - 26000000, /* 26 MHz */ - 0, /* NA */ - 38400000, /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = { - {125, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {625, 6, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {625, 7, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {750, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {625, 15, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_2ghz[NUM_SYS_CLKS] = { - {500, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {2024, 16, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {625, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {1000, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {625, 11, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = { - {275, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {550, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = { - {200, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {375, 8, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {375, 17, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = { - {200, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {375, 8, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {375, 17, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_550mhz[NUM_SYS_CLKS] = { - {275, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1375, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {1375, 23, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {550, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {1375, 47, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = { - {266, 2, 2, 5, 8, 4, 62, 5, 5, 7}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {570, 8, 2, 5, 8, 4, 62, 5, 5, 7}, /* 16.8 MHz */ - {665, 11, 2, 5, 8, 4, 62, 5, 5, 7}, /* 19.2 MHz */ - {532, 12, 2, 5, 8, 4, 62, 5, 5, 7}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {665, 23, 2, 5, 8, 4, 62, 5, 5, 7} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = { - {266, 2, 4, 5, 8, 8, 62, 10, 10, 14}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {570, 8, 4, 5, 8, 8, 62, 10, 10, 14}, /* 16.8 MHz */ - {665, 11, 4, 5, 8, 8, 62, 10, 10, 14}, /* 19.2 MHz */ - {532, 12, 4, 8, 8, 8, 62, 10, 10, 14}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {665, 23, 4, 8, 8, 8, 62, 10, 10, 14} /* 38.4 MHz */ -}; - -static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = { - {32, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {160, 6, 4, 3, 6, 4, -1, 2, -1, -1}, /* 16.8 MHz */ - {20, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 19.2 MHz */ - {192, 12, 4, 3, 6, 4, -1, 2, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {10, 0, 4, 3, 6, 4, -1, 2, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { - {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {2011, 28, -1, -1, 5, 6, -1, -1, -1, -1}, /* 16.8 MHz */ - {1881, 30, -1, -1, 5, 6, -1, -1, -1, -1}, /* 19.2 MHz */ - {1165, 25, -1, -1, 5, 6, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {1972, 64, -1, -1, 5, 6, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with sys_clk as source */ -static const struct dpll_params - abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { - {49, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {35, 5, 1, 1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {46, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {34, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {64, 24, 1, 1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with 32K clock as source */ -static const struct dpll_params abe_dpll_params_32k_196608khz = { - 750, 0, 1, 1, -1, -1, -1, -1, -1, -1 -}; - -static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { - {400, 4, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {400, 6, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {400, 7, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {480, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {400, 15, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -void setup_post_dividers(u32 *const base, const struct dpll_params *params) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - /* Setup post-dividers */ - if (params->m2 >= 0) - writel(params->m2, &dpll_regs->cm_div_m2_dpll); - if (params->m3 >= 0) - writel(params->m3, &dpll_regs->cm_div_m3_dpll); - if (params->h11 >= 0) - writel(params->h11, &dpll_regs->cm_div_h11_dpll); - if (params->h12 >= 0) - writel(params->h12, &dpll_regs->cm_div_h12_dpll); - if (params->h13 >= 0) - writel(params->h13, &dpll_regs->cm_div_h13_dpll); - if (params->h14 >= 0) - writel(params->h14, &dpll_regs->cm_div_h14_dpll); - if (params->h22 >= 0) - writel(params->h22, &dpll_regs->cm_div_h22_dpll); - if (params->h23 >= 0) - writel(params->h23, &dpll_regs->cm_div_h23_dpll); -} - -const struct dpll_params *get_mpu_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &mpu_dpll_params_800mhz[sysclk_ind]; -} - -const struct dpll_params *get_core_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - - /* Configuring the DDR to be at 532mhz */ - return &core_dpll_params_2128mhz_ddr532[sysclk_ind]; -} - -const struct dpll_params *get_per_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &per_dpll_params_768mhz[sysclk_ind]; -} - -const struct dpll_params *get_iva_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &iva_dpll_params_2330mhz[sysclk_ind]; -} - -const struct dpll_params *get_usb_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &usb_dpll_params_1920mhz[sysclk_ind]; -} - -const struct dpll_params *get_abe_dpll_params(void) -{ -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - u32 sysclk_ind = get_sys_clk_index(); - return &abe_dpll_params_sysclk_196608khz[sysclk_ind]; -#else - return &abe_dpll_params_32k_196608khz; -#endif -} - -/* - * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva - * We set the maximum voltages allowed here because Smart-Reflex is not - * enabled in bootloader. Voltage initialization in the kernel will set - * these to the nominal values after enabling Smart-Reflex - */ -void scale_vcores(void) -{ - u32 volt_core, volt_mpu, volt_mm; - - omap_vc_init(PRM_VC_I2C_CHANNEL_FREQ_KHZ); - - /* Palmas settings */ - if (omap_revision() != OMAP5432_ES1_0) { - volt_core = VDD_CORE; - volt_mpu = VDD_MPU; - volt_mm = VDD_MM; - } else { - volt_core = VDD_CORE_5432; - volt_mpu = VDD_MPU_5432; - volt_mm = VDD_MM_5432; - } - - do_scale_vcore(SMPS_REG_ADDR_8_CORE, volt_core); - do_scale_vcore(SMPS_REG_ADDR_12_MPU, volt_mpu); - do_scale_vcore(SMPS_REG_ADDR_45_IVA, volt_mm); - - if (omap_revision() == OMAP5432_ES1_0) { - /* Configure LDO SRAM "magic" bits */ - writel(2, &prcm->prm_sldo_core_setup); - writel(2, &prcm->prm_sldo_mpu_setup); - writel(2, &prcm->prm_sldo_mm_setup); - } -} - -u32 get_offset_code(u32 volt_offset) -{ - u32 offset_code, step = 10000; /* 10 mV represented in uV */ - - volt_offset -= PALMAS_SMPS_BASE_VOLT_UV; - - offset_code = (volt_offset + step - 1) / step; - - /* - * Offset codes 1-6 all give the base voltage in Palmas - * Offset code 0 switches OFF the SMPS - */ - return offset_code + 6; -} - -/* - * Enable essential clock domains, modules and - * do some additional special settings needed - */ -void enable_basic_clocks(void) -{ - u32 *const clk_domains_essential[] = { - &prcm->cm_l4per_clkstctrl, - &prcm->cm_l3init_clkstctrl, - &prcm->cm_memif_clkstctrl, - &prcm->cm_l4cfg_clkstctrl, - 0 - }; - - u32 *const clk_modules_hw_auto_essential[] = { - &prcm->cm_l3_2_gpmc_clkctrl, - &prcm->cm_memif_emif_1_clkctrl, - &prcm->cm_memif_emif_2_clkctrl, - &prcm->cm_l4cfg_l4_cfg_clkctrl, - &prcm->cm_wkup_gpio1_clkctrl, - &prcm->cm_l4per_gpio2_clkctrl, - &prcm->cm_l4per_gpio3_clkctrl, - &prcm->cm_l4per_gpio4_clkctrl, - &prcm->cm_l4per_gpio5_clkctrl, - &prcm->cm_l4per_gpio6_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_essential[] = { - &prcm->cm_wkup_gptimer1_clkctrl, - &prcm->cm_l3init_hsmmc1_clkctrl, - &prcm->cm_l3init_hsmmc2_clkctrl, - &prcm->cm_l4per_gptimer2_clkctrl, - &prcm->cm_wkup_wdtimer2_clkctrl, - &prcm->cm_l4per_uart3_clkctrl, - &prcm->cm_l4per_i2c1_clkctrl, - 0 - }; - - /* Enable optional additional functional clock for GPIO4 */ - setbits_le32(&prcm->cm_l4per_gpio4_clkctrl, - GPIO4_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable 96 MHz clock for MMC1 & MMC2 */ - setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - - /* Set the correct clock dividers for mmc */ - setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_DIV_MASK); - setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_DIV_MASK); - - /* Select 32KHz clock as the source of GPTIMER1 */ - setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl, - GPTIMER1_CLKCTRL_CLKSEL_MASK); - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); - - /* Select 384Mhz for GPU as its the POR for ES1.0 */ - setbits_le32(&prcm->cm_sgx_sgx_clkctrl, - CLKSEL_GPU_HYD_GCLK_MASK); - setbits_le32(&prcm->cm_sgx_sgx_clkctrl, - CLKSEL_GPU_CORE_GCLK_MASK); - - /* Enable SCRM OPT clocks for PER and CORE dpll */ - setbits_le32(&prcm->cm_wkupaon_scrm_clkctrl, - OPTFCLKEN_SCRM_PER_MASK); - setbits_le32(&prcm->cm_wkupaon_scrm_clkctrl, - OPTFCLKEN_SCRM_CORE_MASK); -} - -void enable_basic_uboot_clocks(void) -{ - u32 *const clk_domains_essential[] = { - 0 - }; - - u32 *const clk_modules_hw_auto_essential[] = { - 0 - }; - - u32 *const clk_modules_explicit_en_essential[] = { - &prcm->cm_l4per_mcspi1_clkctrl, - &prcm->cm_l4per_i2c2_clkctrl, - &prcm->cm_l4per_i2c3_clkctrl, - &prcm->cm_l4per_i2c4_clkctrl, - &prcm->cm_l3init_hsusbtll_clkctrl, - &prcm->cm_l3init_hsusbhost_clkctrl, - &prcm->cm_l3init_fsusb_clkctrl, - 0 - }; - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -/* - * Enable non-essential clock domains, modules and - * do some additional special settings needed - */ -void enable_non_essential_clocks(void) -{ - u32 *const clk_domains_non_essential[] = { - &prcm->cm_mpu_m3_clkstctrl, - &prcm->cm_ivahd_clkstctrl, - &prcm->cm_dsp_clkstctrl, - &prcm->cm_dss_clkstctrl, - &prcm->cm_sgx_clkstctrl, - &prcm->cm1_abe_clkstctrl, - &prcm->cm_c2c_clkstctrl, - &prcm->cm_cam_clkstctrl, - &prcm->cm_dss_clkstctrl, - &prcm->cm_sdma_clkstctrl, - 0 - }; - - u32 *const clk_modules_hw_auto_non_essential[] = { - &prcm->cm_mpu_m3_mpu_m3_clkctrl, - &prcm->cm_ivahd_ivahd_clkctrl, - &prcm->cm_ivahd_sl2_clkctrl, - &prcm->cm_dsp_dsp_clkctrl, - &prcm->cm_l3instr_l3_3_clkctrl, - &prcm->cm_l3instr_l3_instr_clkctrl, - &prcm->cm_l3instr_intrconn_wp1_clkctrl, - &prcm->cm_l3init_hsi_clkctrl, - &prcm->cm_l4per_hdq1w_clkctrl, - 0 - }; - - u32 *const clk_modules_explicit_en_non_essential[] = { - &prcm->cm1_abe_aess_clkctrl, - &prcm->cm1_abe_pdm_clkctrl, - &prcm->cm1_abe_dmic_clkctrl, - &prcm->cm1_abe_mcasp_clkctrl, - &prcm->cm1_abe_mcbsp1_clkctrl, - &prcm->cm1_abe_mcbsp2_clkctrl, - &prcm->cm1_abe_mcbsp3_clkctrl, - &prcm->cm1_abe_slimbus_clkctrl, - &prcm->cm1_abe_timer5_clkctrl, - &prcm->cm1_abe_timer6_clkctrl, - &prcm->cm1_abe_timer7_clkctrl, - &prcm->cm1_abe_timer8_clkctrl, - &prcm->cm1_abe_wdt3_clkctrl, - &prcm->cm_l4per_gptimer9_clkctrl, - &prcm->cm_l4per_gptimer10_clkctrl, - &prcm->cm_l4per_gptimer11_clkctrl, - &prcm->cm_l4per_gptimer3_clkctrl, - &prcm->cm_l4per_gptimer4_clkctrl, - &prcm->cm_l4per_mcspi2_clkctrl, - &prcm->cm_l4per_mcspi3_clkctrl, - &prcm->cm_l4per_mcspi4_clkctrl, - &prcm->cm_l4per_mmcsd3_clkctrl, - &prcm->cm_l4per_mmcsd4_clkctrl, - &prcm->cm_l4per_mmcsd5_clkctrl, - &prcm->cm_l4per_uart1_clkctrl, - &prcm->cm_l4per_uart2_clkctrl, - &prcm->cm_l4per_uart4_clkctrl, - &prcm->cm_wkup_keyboard_clkctrl, - &prcm->cm_wkup_wdtimer2_clkctrl, - &prcm->cm_cam_iss_clkctrl, - &prcm->cm_cam_fdif_clkctrl, - &prcm->cm_dss_dss_clkctrl, - &prcm->cm_sgx_sgx_clkctrl, - 0 - }; - - /* Enable optional functional clock for ISS */ - setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable all optional functional clocks of DSS */ - setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); - - do_enable_clocks(clk_domains_non_essential, - clk_modules_hw_auto_non_essential, - clk_modules_explicit_en_non_essential, - 0); - - /* Put camera module in no sleep mode */ - clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK, - CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << - MODULE_CLKCTRL_MODULEMODE_SHIFT); -} diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c new file mode 100644 index 0000000000..ced274e4db --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -0,0 +1,596 @@ +/* + * + * HW data initialization for OMAP5 + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <asm/arch/omap.h> +#include <asm/arch/sys_proto.h> +#include <asm/omap_common.h> +#include <asm/arch/clocks.h> +#include <asm/omap_gpio.h> +#include <asm/io.h> +#include <asm/emif.h> + +struct prcm_regs const **prcm = + (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; +struct dplls const **dplls_data = + (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; +struct vcores_data const **omap_vcores = + (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; +struct omap_sys_ctrl_regs const **ctrl = + (struct omap_sys_ctrl_regs const **)OMAP5_SRAM_SCRATCH_SYS_CTRL; + +/* OPP HIGH FREQUENCY for ES2.0 */ +static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = { + {125, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {625, 6, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {625, 7, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {750, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {625, 15, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP NOM FREQUENCY for ES2.0, OPP HIGH for ES1.0 */ +static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = { + {275, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {550, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP NOM FREQUENCY for ES1.0 */ +static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = { + {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {375, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {375, 17, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP LOW FREQUENCY for ES1.0 */ +static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = { + {200, 2, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {375, 8, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {375, 17, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* OPP LOW FREQUENCY for ES2.0 */ +static const struct dpll_params mpu_dpll_params_499mhz[NUM_SYS_CLKS] = { + {499, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {297, 9, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {493, 18, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {499, 25, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {493, 37, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = { + {250, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {119, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {625, 11, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {500, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {625, 23, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ + {50, 0, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = { + {266, 2, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 16.8 MHz */ + {277, 4, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 19.2 MHz */ + {368, 8, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr532_es2[NUM_SYS_CLKS] = { + {266, 2, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 16.8 MHz */ + {277, 4, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 19.2 MHz */ + {368, 8, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr532_dra7xx[NUM_SYS_CLKS] = { + {266, 2, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 16.8 MHz */ + {277, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 19.2 MHz */ + {368, 8, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6}, /* 38.4 MHz */ + {266, 4, 2, -1, -1, 4, 62, 5, -1, 5, 7, 6} /* 20 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = { + {266, 2, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 16.8 MHz */ + {277, 4, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 19.2 MHz */ + {368, 8, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 4, 8, 8, 8, 62, 10, -1, 10, 14, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr266_es2[NUM_SYS_CLKS] = { + {266, 2, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {443, 6, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 16.8 MHz */ + {277, 4, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 19.2 MHz */ + {368, 8, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {277, 9, 4, 8, 8, 8, 62, 5, 12, 10, 14, 12} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = { + {32, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {160, 6, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {10, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = { + {32, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {160, 6, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {10, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = { + {32, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {160, 6, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {10, 0, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 38.4 MHz */ + {96, 4, 4, -1, 3, 4, 10, 2, -1, -1, -1, -1} /* 20 MHz */ +}; + +static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { + {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {208, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {182, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {224, 4, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with sys_clk as source */ +static const struct dpll_params + abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { + {49, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with 32K clock as source */ +static const struct dpll_params abe_dpll_params_32k_196608khz = { + 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1 +}; + +static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { + {400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ + {48, 0, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ +}; + +static const struct dpll_params ddr_dpll_params_1066mhz[NUM_SYS_CLKS] = { + {533, 11, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {222, 6, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {111, 3, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {41, 1, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {347, 24, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ + {533, 19, 1, 1, 4, -1, -1, -1, -1, -1, -1, -1} /* 20 MHz */ +}; + +struct dplls omap5_dplls_es1 = { + .mpu = mpu_dpll_params_800mhz, + .core = core_dpll_params_2128mhz_ddr532, + .per = per_dpll_params_768mhz, + .iva = iva_dpll_params_2330mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls omap5_dplls_es2 = { + .mpu = mpu_dpll_params_1100mhz, + .core = core_dpll_params_2128mhz_ddr532_es2, + .per = per_dpll_params_768mhz_es2, + .iva = iva_dpll_params_2330mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz, + .ddr = NULL +}; + +struct dplls dra7xx_dplls = { + .mpu = mpu_dpll_params_1ghz, + .core = core_dpll_params_2128mhz_ddr532_dra7xx, + .per = per_dpll_params_768mhz_dra7xx, + .usb = usb_dpll_params_1920mhz, + .ddr = ddr_dpll_params_1066mhz, +}; + +struct pmic_data palmas = { + .base_offset = PALMAS_SMPS_BASE_VOLT_UV, + .step = 10000, /* 10 mV represented in uV */ + /* + * Offset codes 1-6 all give the base voltage in Palmas + * Offset code 0 switches OFF the SMPS + */ + .start_code = 6, +}; + +struct vcores_data omap5430_volts = { + .mpu.value = VDD_MPU, + .mpu.addr = SMPS_REG_ADDR_12_MPU, + .mpu.pmic = &palmas, + + .core.value = VDD_CORE, + .core.addr = SMPS_REG_ADDR_8_CORE, + .core.pmic = &palmas, + + .mm.value = VDD_MM, + .mm.addr = SMPS_REG_ADDR_45_IVA, + .mm.pmic = &palmas, +}; + +struct vcores_data omap5430_volts_es2 = { + .mpu.value = VDD_MPU_ES2, + .mpu.addr = SMPS_REG_ADDR_12_MPU, + .mpu.pmic = &palmas, + + .core.value = VDD_CORE_ES2, + .core.addr = SMPS_REG_ADDR_8_CORE, + .core.pmic = &palmas, + + .mm.value = VDD_MM_ES2, + .mm.addr = SMPS_REG_ADDR_45_IVA, + .mm.pmic = &palmas, +}; + +/* + * Enable essential clock domains, modules and + * do some additional special settings needed + */ +void enable_basic_clocks(void) +{ + u32 const clk_domains_essential[] = { + (*prcm)->cm_l4per_clkstctrl, + (*prcm)->cm_l3init_clkstctrl, + (*prcm)->cm_memif_clkstctrl, + (*prcm)->cm_l4cfg_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3_gpmc_clkctrl, + (*prcm)->cm_memif_emif_1_clkctrl, + (*prcm)->cm_memif_emif_2_clkctrl, + (*prcm)->cm_l4cfg_l4_cfg_clkctrl, + (*prcm)->cm_wkup_gpio1_clkctrl, + (*prcm)->cm_l4per_gpio2_clkctrl, + (*prcm)->cm_l4per_gpio3_clkctrl, + (*prcm)->cm_l4per_gpio4_clkctrl, + (*prcm)->cm_l4per_gpio5_clkctrl, + (*prcm)->cm_l4per_gpio6_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_wkup_gptimer1_clkctrl, + (*prcm)->cm_l3init_hsmmc1_clkctrl, + (*prcm)->cm_l3init_hsmmc2_clkctrl, + (*prcm)->cm_l4per_gptimer2_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_l4per_uart3_clkctrl, + (*prcm)->cm_l4per_i2c1_clkctrl, + 0 + }; + + /* Enable optional additional functional clock for GPIO4 */ + setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, + GPIO4_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable 96 MHz clock for MMC1 & MMC2 */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + + /* Set the correct clock dividers for mmc */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_DIV_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_DIV_MASK); + + /* Select 32KHz clock as the source of GPTIMER1 */ + setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, + GPTIMER1_CLKCTRL_CLKSEL_MASK); + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); + + /* Select 384Mhz for GPU as its the POR for ES1.0 */ + setbits_le32((*prcm)->cm_sgx_sgx_clkctrl, + CLKSEL_GPU_HYD_GCLK_MASK); + setbits_le32((*prcm)->cm_sgx_sgx_clkctrl, + CLKSEL_GPU_CORE_GCLK_MASK); + + /* Enable SCRM OPT clocks for PER and CORE dpll */ + setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, + OPTFCLKEN_SCRM_PER_MASK); + setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, + OPTFCLKEN_SCRM_CORE_MASK); +} + +void enable_basic_uboot_clocks(void) +{ + u32 const clk_domains_essential[] = { + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_l4per_mcspi1_clkctrl, + (*prcm)->cm_l4per_i2c2_clkctrl, + (*prcm)->cm_l4per_i2c3_clkctrl, + (*prcm)->cm_l4per_i2c4_clkctrl, + (*prcm)->cm_l3init_hsusbtll_clkctrl, + (*prcm)->cm_l3init_hsusbhost_clkctrl, + (*prcm)->cm_l3init_fsusb_clkctrl, + 0 + }; + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +/* + * Enable non-essential clock domains, modules and + * do some additional special settings needed + */ +void enable_non_essential_clocks(void) +{ + u32 const clk_domains_non_essential[] = { + (*prcm)->cm_mpu_m3_clkstctrl, + (*prcm)->cm_ivahd_clkstctrl, + (*prcm)->cm_dsp_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sgx_clkstctrl, + (*prcm)->cm1_abe_clkstctrl, + (*prcm)->cm_c2c_clkstctrl, + (*prcm)->cm_cam_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sdma_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_non_essential[] = { + (*prcm)->cm_mpu_m3_mpu_m3_clkctrl, + (*prcm)->cm_ivahd_ivahd_clkctrl, + (*prcm)->cm_ivahd_sl2_clkctrl, + (*prcm)->cm_dsp_dsp_clkctrl, + (*prcm)->cm_l3instr_l3_3_clkctrl, + (*prcm)->cm_l3instr_l3_instr_clkctrl, + (*prcm)->cm_l3instr_intrconn_wp1_clkctrl, + (*prcm)->cm_l3init_hsi_clkctrl, + (*prcm)->cm_l4per_hdq1w_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_non_essential[] = { + (*prcm)->cm1_abe_aess_clkctrl, + (*prcm)->cm1_abe_pdm_clkctrl, + (*prcm)->cm1_abe_dmic_clkctrl, + (*prcm)->cm1_abe_mcasp_clkctrl, + (*prcm)->cm1_abe_mcbsp1_clkctrl, + (*prcm)->cm1_abe_mcbsp2_clkctrl, + (*prcm)->cm1_abe_mcbsp3_clkctrl, + (*prcm)->cm1_abe_slimbus_clkctrl, + (*prcm)->cm1_abe_timer5_clkctrl, + (*prcm)->cm1_abe_timer6_clkctrl, + (*prcm)->cm1_abe_timer7_clkctrl, + (*prcm)->cm1_abe_timer8_clkctrl, + (*prcm)->cm1_abe_wdt3_clkctrl, + (*prcm)->cm_l4per_gptimer9_clkctrl, + (*prcm)->cm_l4per_gptimer10_clkctrl, + (*prcm)->cm_l4per_gptimer11_clkctrl, + (*prcm)->cm_l4per_gptimer3_clkctrl, + (*prcm)->cm_l4per_gptimer4_clkctrl, + (*prcm)->cm_l4per_mcspi2_clkctrl, + (*prcm)->cm_l4per_mcspi3_clkctrl, + (*prcm)->cm_l4per_mcspi4_clkctrl, + (*prcm)->cm_l4per_mmcsd3_clkctrl, + (*prcm)->cm_l4per_mmcsd4_clkctrl, + (*prcm)->cm_l4per_mmcsd5_clkctrl, + (*prcm)->cm_l4per_uart1_clkctrl, + (*prcm)->cm_l4per_uart2_clkctrl, + (*prcm)->cm_l4per_uart4_clkctrl, + (*prcm)->cm_wkup_keyboard_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_cam_iss_clkctrl, + (*prcm)->cm_cam_fdif_clkctrl, + (*prcm)->cm_dss_dss_clkctrl, + (*prcm)->cm_sgx_sgx_clkctrl, + 0 + }; + + /* Enable optional functional clock for ISS */ + setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable all optional functional clocks of DSS */ + setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); + + do_enable_clocks(clk_domains_non_essential, + clk_modules_hw_auto_non_essential, + clk_modules_explicit_en_non_essential, + 0); + + /* Put camera module in no sleep mode */ + clrsetbits_le32((*prcm)->cm_cam_clkstctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << + MODULE_CLKCTRL_MODULEMODE_SHIFT); +} + +const struct ctrl_ioregs ioregs_omap5430 = { + .ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, + .ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, + .ctrl_ddrio_0 = DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL, + .ctrl_ddrio_1 = DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL, + .ctrl_ddrio_2 = DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL, +}; + +const struct ctrl_ioregs ioregs_omap5432_es1 = { + .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, + .ctrl_lpddr2ch = 0x0, + .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, + .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE, + .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE, + .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE, + .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, +}; + +const struct ctrl_ioregs ioregs_omap5432_es2 = { + .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2, + .ctrl_lpddr2ch = 0x0, + .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2, + .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2, + .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2, + .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2, + .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, +}; + +void hw_data_init(void) +{ + u32 omap_rev = omap_revision(); + + switch (omap_rev) { + + case OMAP5430_ES1_0: + case OMAP5432_ES1_0: + *prcm = &omap5_es1_prcm; + *dplls_data = &omap5_dplls_es1; + *omap_vcores = &omap5430_volts; + *ctrl = &omap5_ctrl; + break; + + case OMAP5430_ES2_0: + case OMAP5432_ES2_0: + *prcm = &omap5_es2_prcm; + *dplls_data = &omap5_dplls_es2; + *omap_vcores = &omap5430_volts_es2; + *ctrl = &omap5_ctrl; + break; + + case DRA752_ES1_0: + *prcm = &dra7xx_prcm; + *dplls_data = &dra7xx_dplls; + *omap_vcores = &omap5430_volts_es2; + *ctrl = &dra7xx_ctrl; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } +} + +void get_ioregs(const struct ctrl_ioregs **regs) +{ + u32 omap_rev = omap_revision(); + + switch (omap_rev) { + case OMAP5430_ES1_0: + case OMAP5430_ES2_0: + *regs = &ioregs_omap5430; + break; + case OMAP5432_ES1_0: + *regs = &ioregs_omap5432_es1; + break; + case OMAP5432_ES2_0: + case DRA752_ES1_0: + *regs = &ioregs_omap5432_es2; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } +} diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c index d0c3ff7021..2f4b24752b 100644 --- a/arch/arm/cpu/armv7/omap5/hwinit.c +++ b/arch/arm/cpu/armv7/omap5/hwinit.c @@ -32,6 +32,7 @@ #include <asm/armv7.h> #include <asm/arch/cpu.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/clocks.h> #include <asm/sizes.h> #include <asm/utils.h> #include <asm/arch/gpio.h> @@ -56,76 +57,58 @@ const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx; /* LPDDR2 specific IO settings */ static void io_settings_lpddr2(void) { - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch1_0)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch1_1)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch2_0)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, - &(ioregs_base->control_ddrch2_1)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, - &(ioregs_base->control_lpddr2ch1_0)); - writel(DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, - &(ioregs_base->control_lpddr2ch1_1)); - writel(DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL, - &(ioregs_base->control_ddrio_0)); - writel(DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL, - &(ioregs_base->control_ddrio_1)); - writel(DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL, - &(ioregs_base->control_ddrio_2)); + const struct ctrl_ioregs *ioregs; + + get_ioregs(&ioregs); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1); + writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0); + writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1); + writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2); } /* DDR3 specific IO settings */ static void io_settings_ddr3(void) { u32 io_settings = 0; - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - - writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddr3ch1_0)); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch1_0)); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch1_1)); - - writel(DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddr3ch2_0)); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch2_0)); - writel(DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, - &(ioregs_base->control_ddrch2_1)); - - writel(DDR_IO_0_VREF_CELLS_DDR3_VALUE, - &(ioregs_base->control_ddrio_0)); - writel(DDR_IO_1_VREF_CELLS_DDR3_VALUE, - &(ioregs_base->control_ddrio_1)); - writel(DDR_IO_2_VREF_CELLS_DDR3_VALUE, - &(ioregs_base->control_ddrio_2)); + const struct ctrl_ioregs *ioregs; + + get_ioregs(&ioregs); + writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch1_1); + + writel(ioregs->ctrl_ddr3ch, (*ctrl)->control_ddr3ch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_0); + writel(ioregs->ctrl_ddrch, (*ctrl)->control_ddrch2_1); + + writel(ioregs->ctrl_ddrio_0, (*ctrl)->control_ddrio_0); + writel(ioregs->ctrl_ddrio_1, (*ctrl)->control_ddrio_1); + writel(ioregs->ctrl_ddrio_2, (*ctrl)->control_ddrio_2); /* omap5432 does not use lpddr2 */ - writel(0x0, &(ioregs_base->control_lpddr2ch1_0)); - writel(0x0, &(ioregs_base->control_lpddr2ch1_1)); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_0); + writel(ioregs->ctrl_lpddr2ch, (*ctrl)->control_lpddr2ch1_1); - writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, - &(ioregs_base->control_emif1_sdram_config_ext)); - writel(SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, - &(ioregs_base->control_emif2_sdram_config_ext)); + writel(ioregs->ctrl_emif_sdram_config_ext, + (*ctrl)->control_emif1_sdram_config_ext); + writel(ioregs->ctrl_emif_sdram_config_ext, + (*ctrl)->control_emif2_sdram_config_ext); /* Disable DLL select */ - io_settings = (readl(&(ioregs_base->control_port_emif1_sdram_config)) + io_settings = (readl((*ctrl)->control_port_emif1_sdram_config) & 0xFFEFFFFF); writel(io_settings, - &(ioregs_base->control_port_emif1_sdram_config)); + (*ctrl)->control_port_emif1_sdram_config); - io_settings = (readl(&(ioregs_base->control_port_emif2_sdram_config)) + io_settings = (readl((*ctrl)->control_port_emif2_sdram_config) & 0xFFEFFFFF); writel(io_settings, - &(ioregs_base->control_port_emif2_sdram_config)); + (*ctrl)->control_port_emif2_sdram_config); } /* @@ -134,88 +117,198 @@ static void io_settings_ddr3(void) void do_io_settings(void) { u32 io_settings = 0, mask = 0; - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; /* Impedance settings EMMC, C2C 1,2, hsi2 */ mask = (ds_mask << 2) | (ds_mask << 8) | (ds_mask << 16) | (ds_mask << 18); - io_settings = readl(&(ioregs_base->control_smart1io_padconf_0)) & + io_settings = readl((*ctrl)->control_smart1io_padconf_0) & (~mask); io_settings |= (ds_60_ohm << 8) | (ds_45_ohm << 16) | (ds_45_ohm << 18) | (ds_60_ohm << 2); - writel(io_settings, &(ioregs_base->control_smart1io_padconf_0)); + writel(io_settings, (*ctrl)->control_smart1io_padconf_0); /* Impedance settings Mcspi2 */ mask = (ds_mask << 30); - io_settings = readl(&(ioregs_base->control_smart1io_padconf_1)) & + io_settings = readl((*ctrl)->control_smart1io_padconf_1) & (~mask); io_settings |= (ds_60_ohm << 30); - writel(io_settings, &(ioregs_base->control_smart1io_padconf_1)); + writel(io_settings, (*ctrl)->control_smart1io_padconf_1); /* Impedance settings C2C 3,4 */ mask = (ds_mask << 14) | (ds_mask << 16); - io_settings = readl(&(ioregs_base->control_smart1io_padconf_2)) & + io_settings = readl((*ctrl)->control_smart1io_padconf_2) & (~mask); io_settings |= (ds_45_ohm << 14) | (ds_45_ohm << 16); - writel(io_settings, &(ioregs_base->control_smart1io_padconf_2)); + writel(io_settings, (*ctrl)->control_smart1io_padconf_2); /* Slew rate settings EMMC, C2C 1,2 */ mask = (sc_mask << 8) | (sc_mask << 16) | (sc_mask << 18); - io_settings = readl(&(ioregs_base->control_smart2io_padconf_0)) & + io_settings = readl((*ctrl)->control_smart2io_padconf_0) & (~mask); io_settings |= (sc_fast << 8) | (sc_na << 16) | (sc_na << 18); - writel(io_settings, &(ioregs_base->control_smart2io_padconf_0)); + writel(io_settings, (*ctrl)->control_smart2io_padconf_0); /* Slew rate settings hsi2, Mcspi2 */ mask = (sc_mask << 24) | (sc_mask << 28); - io_settings = readl(&(ioregs_base->control_smart2io_padconf_1)) & + io_settings = readl((*ctrl)->control_smart2io_padconf_1) & (~mask); io_settings |= (sc_fast << 28) | (sc_fast << 24); - writel(io_settings, &(ioregs_base->control_smart2io_padconf_1)); + writel(io_settings, (*ctrl)->control_smart2io_padconf_1); /* Slew rate settings C2C 3,4 */ mask = (sc_mask << 16) | (sc_mask << 18); - io_settings = readl(&(ioregs_base->control_smart2io_padconf_2)) & + io_settings = readl((*ctrl)->control_smart2io_padconf_2) & (~mask); io_settings |= (sc_na << 16) | (sc_na << 18); - writel(io_settings, &(ioregs_base->control_smart2io_padconf_2)); + writel(io_settings, (*ctrl)->control_smart2io_padconf_2); /* impedance and slew rate settings for usb */ mask = (usb_i_mask << 29) | (usb_i_mask << 26) | (usb_i_mask << 23) | (usb_i_mask << 20) | (usb_i_mask << 17) | (usb_i_mask << 14); - io_settings = readl(&(ioregs_base->control_smart3io_padconf_1)) & + io_settings = readl((*ctrl)->control_smart3io_padconf_1) & (~mask); io_settings |= (ds_60_ohm << 29) | (ds_60_ohm << 26) | (ds_60_ohm << 23) | (sc_fast << 20) | (sc_fast << 17) | (sc_fast << 14); - writel(io_settings, &(ioregs_base->control_smart3io_padconf_1)); + writel(io_settings, (*ctrl)->control_smart3io_padconf_1); - if (omap_revision() <= OMAP5430_ES1_0) + if (emif_sdram_type() == EMIF_SDRAM_TYPE_LPDDR2) io_settings_lpddr2(); else io_settings_ddr3(); /* Efuse settings */ - writel(EFUSE_1, &(ioregs_base->control_efuse_1)); - writel(EFUSE_2, &(ioregs_base->control_efuse_2)); - writel(EFUSE_3, &(ioregs_base->control_efuse_3)); - writel(EFUSE_4, &(ioregs_base->control_efuse_4)); + writel(EFUSE_1, (*ctrl)->control_efuse_1); + writel(EFUSE_2, (*ctrl)->control_efuse_2); + writel(EFUSE_3, (*ctrl)->control_efuse_3); + writel(EFUSE_4, (*ctrl)->control_efuse_4); +} + +static const struct srcomp_params srcomp_parameters[NUM_SYS_CLKS] = { + {0x45, 0x1}, /* 12 MHz */ + {-1, -1}, /* 13 MHz */ + {0x63, 0x2}, /* 16.8 MHz */ + {0x57, 0x2}, /* 19.2 MHz */ + {0x20, 0x1}, /* 26 MHz */ + {-1, -1}, /* 27 MHz */ + {0x41, 0x3} /* 38.4 MHz */ +}; + +void srcomp_enable(void) +{ + u32 srcomp_value, mul_factor, div_factor, clk_val, i; + u32 sysclk_ind = get_sys_clk_index(); + u32 omap_rev = omap_revision(); + + mul_factor = srcomp_parameters[sysclk_ind].multiply_factor; + div_factor = srcomp_parameters[sysclk_ind].divide_factor; + + for (i = 0; i < 4; i++) { + srcomp_value = readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= + ~(MULTIPLY_FACTOR_XS_MASK | DIVIDE_FACTOR_XS_MASK); + srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) | + (div_factor << DIVIDE_FACTOR_XS_SHIFT); + writel(srcomp_value, (*ctrl)->control_srcomp_north_side + i*4); + } + + if ((omap_rev == OMAP5430_ES1_0) || (omap_rev == OMAP5432_ES1_0)) { + clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl); + clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; + writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl); + + for (i = 0; i < 4; i++) { + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~PWRDWN_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + + while (((readl((*ctrl)->control_srcomp_north_side + i*4) + & SRCODE_READ_XS_MASK) >> + SRCODE_READ_XS_SHIFT) == 0) + ; + + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~OVERRIDE_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + } + } else { + srcomp_value = readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value &= ~(MULTIPLY_FACTOR_XS_MASK | + DIVIDE_FACTOR_XS_MASK); + srcomp_value |= (mul_factor << MULTIPLY_FACTOR_XS_SHIFT) | + (div_factor << DIVIDE_FACTOR_XS_SHIFT); + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + + for (i = 0; i < 4; i++) { + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~OVERRIDE_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + } + + srcomp_value = + readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value |= SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + + srcomp_value = + readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value &= ~OVERRIDE_XS_MASK; + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + + clk_val = readl((*prcm)->cm_coreaon_io_srcomp_clkctrl); + clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; + writel(clk_val, (*prcm)->cm_coreaon_io_srcomp_clkctrl); + + clk_val = readl((*prcm)->cm_wkupaon_io_srcomp_clkctrl); + clk_val |= OPTFCLKEN_SRCOMP_FCLK_MASK; + writel(clk_val, (*prcm)->cm_wkupaon_io_srcomp_clkctrl); + + for (i = 0; i < 4; i++) { + while (((readl((*ctrl)->control_srcomp_north_side + i*4) + & SRCODE_READ_XS_MASK) >> + SRCODE_READ_XS_SHIFT) == 0) + ; + + srcomp_value = + readl((*ctrl)->control_srcomp_north_side + i*4); + srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, + (*ctrl)->control_srcomp_north_side + i*4); + } + + while (((readl((*ctrl)->control_srcomp_east_side_wkup) & + SRCODE_READ_XS_MASK) >> SRCODE_READ_XS_SHIFT) == 0) + ; + + srcomp_value = + readl((*ctrl)->control_srcomp_east_side_wkup); + srcomp_value &= ~SRCODE_OVERRIDE_SEL_XS_MASK; + writel(srcomp_value, (*ctrl)->control_srcomp_east_side_wkup); + } } #endif void config_data_eye_leveling_samples(u32 emif_base) { - struct omap_sys_ctrl_regs *ioregs_base = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - /*EMIF_SDRAM_CONFIG_EXT-Read data eye leveling no of samples =4*/ if (emif_base == EMIF1_BASE) writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES, - &(ioregs_base->control_emif1_sdram_config_ext)); + (*ctrl)->control_emif1_sdram_config_ext); else if (emif_base == EMIF2_BASE) writel(SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES, - &(ioregs_base->control_emif2_sdram_config_ext)); + (*ctrl)->control_emif2_sdram_config_ext); } void init_omap_revision(void) @@ -227,17 +320,25 @@ void init_omap_revision(void) */ unsigned int rev = cortex_rev(); - switch (rev) { - case MIDR_CORTEX_A15_R0P0: - switch (readl(CONTROL_ID_CODE)) { - case OMAP5430_CONTROL_ID_CODE_ES1_0: - *omap_si_rev = OMAP5430_ES1_0; - break; - case OMAP5432_CONTROL_ID_CODE_ES1_0: - default: - *omap_si_rev = OMAP5432_ES1_0; - break; - } + switch (readl(CONTROL_ID_CODE)) { + case OMAP5430_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = OMAP5430_ES1_0; + if (rev == MIDR_CORTEX_A15_R2P2) + *omap_si_rev = OMAP5430_ES2_0; + break; + case OMAP5432_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = OMAP5432_ES1_0; + if (rev == MIDR_CORTEX_A15_R2P2) + *omap_si_rev = OMAP5432_ES2_0; + break; + case OMAP5430_CONTROL_ID_CODE_ES2_0: + *omap_si_rev = OMAP5430_ES2_0; + break; + case OMAP5432_CONTROL_ID_CODE_ES2_0: + *omap_si_rev = OMAP5432_ES2_0; + break; + case DRA752_CONTROL_ID_CODE_ES1_0: + *omap_si_rev = DRA752_ES1_0; break; default: *omap_si_rev = OMAP5430_SILICON_ID_INVALID; @@ -253,7 +354,12 @@ void reset_cpu(ulong ignored) * So use cold reset in case instead. */ if (omap_rev == OMAP5430_ES1_0) - writel(PRM_RSTCTRL_RESET << 0x1, PRM_RSTCTRL); + writel(PRM_RSTCTRL_RESET << 0x1, (*prcm)->prm_rstctrl); else - writel(PRM_RSTCTRL_RESET, PRM_RSTCTRL); + writel(PRM_RSTCTRL_RESET, (*prcm)->prm_rstctrl); +} + +u32 warm_reset(void) +{ + return readl((*prcm)->prm_rstst) & PRM_RSTST_WARM_RESET_MASK; } diff --git a/arch/arm/cpu/armv7/omap5/prcm-regs.c b/arch/arm/cpu/armv7/omap5/prcm-regs.c new file mode 100644 index 0000000000..b8a61fe881 --- /dev/null +++ b/arch/arm/cpu/armv7/omap5/prcm-regs.c @@ -0,0 +1,958 @@ +/* + * + * HW regs data for OMAP5 Soc + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/omap_common.h> + +struct prcm_regs const omap5_es1_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a004100, + .cm_clksel_abe = 0x4a004108, + .cm_dll_ctrl = 0x4a004110, + .cm_clkmode_dpll_core = 0x4a004120, + .cm_idlest_dpll_core = 0x4a004124, + .cm_autoidle_dpll_core = 0x4a004128, + .cm_clksel_dpll_core = 0x4a00412c, + .cm_div_m2_dpll_core = 0x4a004130, + .cm_div_m3_dpll_core = 0x4a004134, + .cm_div_h11_dpll_core = 0x4a004138, + .cm_div_h12_dpll_core = 0x4a00413c, + .cm_div_h13_dpll_core = 0x4a004140, + .cm_div_h14_dpll_core = 0x4a004144, + .cm_ssc_deltamstep_dpll_core = 0x4a004148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, + .cm_emu_override_dpll_core = 0x4a004150, + .cm_div_h22_dpllcore = 0x4a004154, + .cm_div_h23_dpll_core = 0x4a004158, + .cm_clkmode_dpll_mpu = 0x4a004160, + .cm_idlest_dpll_mpu = 0x4a004164, + .cm_autoidle_dpll_mpu = 0x4a004168, + .cm_clksel_dpll_mpu = 0x4a00416c, + .cm_div_m2_dpll_mpu = 0x4a004170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, + .cm_bypclk_dpll_mpu = 0x4a00419c, + .cm_clkmode_dpll_iva = 0x4a0041a0, + .cm_idlest_dpll_iva = 0x4a0041a4, + .cm_autoidle_dpll_iva = 0x4a0041a8, + .cm_clksel_dpll_iva = 0x4a0041ac, + .cm_div_h11_dpll_iva = 0x4a0041b8, + .cm_div_h12_dpll_iva = 0x4a0041bc, + .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, + .cm_bypclk_dpll_iva = 0x4a0041dc, + .cm_clkmode_dpll_abe = 0x4a0041e0, + .cm_idlest_dpll_abe = 0x4a0041e4, + .cm_autoidle_dpll_abe = 0x4a0041e8, + .cm_clksel_dpll_abe = 0x4a0041ec, + .cm_div_m2_dpll_abe = 0x4a0041f0, + .cm_div_m3_dpll_abe = 0x4a0041f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a004208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, + .cm_clkmode_dpll_ddrphy = 0x4a004220, + .cm_idlest_dpll_ddrphy = 0x4a004224, + .cm_autoidle_dpll_ddrphy = 0x4a004228, + .cm_clksel_dpll_ddrphy = 0x4a00422c, + .cm_div_m2_dpll_ddrphy = 0x4a004230, + .cm_div_h11_dpll_ddrphy = 0x4a004238, + .cm_div_h12_dpll_ddrphy = 0x4a00423c, + .cm_div_h13_dpll_ddrphy = 0x4a004240, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, + .cm_shadow_freq_config1 = 0x4a004260, + .cm_mpu_mpu_clkctrl = 0x4a004320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a004400, + .cm_dsp_dsp_clkctrl = 0x4a004420, + + /* cm1.abe */ + .cm1_abe_clkstctrl = 0x4a004500, + .cm1_abe_l4abe_clkctrl = 0x4a004520, + .cm1_abe_aess_clkctrl = 0x4a004528, + .cm1_abe_pdm_clkctrl = 0x4a004530, + .cm1_abe_dmic_clkctrl = 0x4a004538, + .cm1_abe_mcasp_clkctrl = 0x4a004540, + .cm1_abe_mcbsp1_clkctrl = 0x4a004548, + .cm1_abe_mcbsp2_clkctrl = 0x4a004550, + .cm1_abe_mcbsp3_clkctrl = 0x4a004558, + .cm1_abe_slimbus_clkctrl = 0x4a004560, + .cm1_abe_timer5_clkctrl = 0x4a004568, + .cm1_abe_timer6_clkctrl = 0x4a004570, + .cm1_abe_timer7_clkctrl = 0x4a004578, + .cm1_abe_timer8_clkctrl = 0x4a004580, + .cm1_abe_wdt3_clkctrl = 0x4a004588, + + /* cm2.ckgen */ + .cm_clksel_mpu_m3_iss_root = 0x4a008100, + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_scale_fclk = 0x4a008108, + .cm_core_dvfs_perf1 = 0x4a008110, + .cm_core_dvfs_perf2 = 0x4a008114, + .cm_core_dvfs_perf3 = 0x4a008118, + .cm_core_dvfs_perf4 = 0x4a00811c, + .cm_core_dvfs_current = 0x4a008124, + .cm_iva_dvfs_perf_tesla = 0x4a008128, + .cm_iva_dvfs_perf_ivahd = 0x4a00812c, + .cm_iva_dvfs_perf_abe = 0x4a008130, + .cm_iva_dvfs_current = 0x4a008138, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_h11_dpll_per = 0x4a008158, + .cm_div_h12_dpll_per = 0x4a00815c, + .cm_div_h14_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_emu_override_dpll_per = 0x4a008170, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_unipro = 0x4a0081c0, + .cm_idlest_dpll_unipro = 0x4a0081c4, + .cm_autoidle_dpll_unipro = 0x4a0081c8, + .cm_clksel_dpll_unipro = 0x4a0081cc, + .cm_div_m2_dpll_unipro = 0x4a0081d0, + .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, + .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, + + /* cm2.core */ + .cm_coreaon_bandgap_clkctrl = 0x4a008648, + .cm_coreaon_io_srcomp_clkctrl = 0x4a008650, + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_2_clkstctrl = 0x4a008800, + .cm_l3_2_dynamicdep = 0x4a008808, + .cm_l3_2_l3_2_clkctrl = 0x4a008820, + .cm_l3_gpmc_clkctrl = 0x4a008828, + .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_memif_emif_h1_clkctrl = 0x4a008b50, + .cm_memif_emif_h2_clkctrl = 0x4a008b58, + .cm_memif_dll_h_clkctrl = 0x4a008b60, + .cm_c2c_clkstctrl = 0x4a008c00, + .cm_c2c_staticdep = 0x4a008c04, + .cm_c2c_dynamicdep = 0x4a008c08, + .cm_c2c_sad2d_clkctrl = 0x4a008c20, + .cm_c2c_modem_icr_clkctrl = 0x4a008c28, + .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, + + /* cm2.ivahd */ + .cm_ivahd_clkstctrl = 0x4a008f00, + .cm_ivahd_ivahd_clkctrl = 0x4a008f20, + .cm_ivahd_sl2_clkctrl = 0x4a008f28, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009000, + .cm_cam_iss_clkctrl = 0x4a009020, + .cm_cam_fdif_clkctrl = 0x4a009028, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009100, + .cm_dss_dss_clkctrl = 0x4a009120, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009200, + .cm_sgx_sgx_clkctrl = 0x4a009220, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009300, + .cm_l3init_hsmmc1_clkctrl = 0x4a009328, + .cm_l3init_hsmmc2_clkctrl = 0x4a009330, + .cm_l3init_hsi_clkctrl = 0x4a009338, + .cm_l3init_hsusbhost_clkctrl = 0x4a009358, + .cm_l3init_hsusbotg_clkctrl = 0x4a009360, + .cm_l3init_hsusbtll_clkctrl = 0x4a009368, + .cm_l3init_p1500_clkctrl = 0x4a009378, + .cm_l3init_fsusb_clkctrl = 0x4a0093d0, + .cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0, + + /* cm2.l4per */ + .cm_l4per_clkstctrl = 0x4a009400, + .cm_l4per_dynamicdep = 0x4a009408, + .cm_l4per_adc_clkctrl = 0x4a009420, + .cm_l4per_gptimer10_clkctrl = 0x4a009428, + .cm_l4per_gptimer11_clkctrl = 0x4a009430, + .cm_l4per_gptimer2_clkctrl = 0x4a009438, + .cm_l4per_gptimer3_clkctrl = 0x4a009440, + .cm_l4per_gptimer4_clkctrl = 0x4a009448, + .cm_l4per_gptimer9_clkctrl = 0x4a009450, + .cm_l4per_elm_clkctrl = 0x4a009458, + .cm_l4per_gpio2_clkctrl = 0x4a009460, + .cm_l4per_gpio3_clkctrl = 0x4a009468, + .cm_l4per_gpio4_clkctrl = 0x4a009470, + .cm_l4per_gpio5_clkctrl = 0x4a009478, + .cm_l4per_gpio6_clkctrl = 0x4a009480, + .cm_l4per_hdq1w_clkctrl = 0x4a009488, + .cm_l4per_hecc1_clkctrl = 0x4a009490, + .cm_l4per_hecc2_clkctrl = 0x4a009498, + .cm_l4per_i2c1_clkctrl = 0x4a0094a0, + .cm_l4per_i2c2_clkctrl = 0x4a0094a8, + .cm_l4per_i2c3_clkctrl = 0x4a0094b0, + .cm_l4per_i2c4_clkctrl = 0x4a0094b8, + .cm_l4per_l4per_clkctrl = 0x4a0094c0, + .cm_l4per_mcasp2_clkctrl = 0x4a0094d0, + .cm_l4per_mcasp3_clkctrl = 0x4a0094d8, + .cm_l4per_mgate_clkctrl = 0x4a0094e8, + .cm_l4per_mcspi1_clkctrl = 0x4a0094f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0094f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009500, + .cm_l4per_mcspi4_clkctrl = 0x4a009508, + .cm_l4per_gpio7_clkctrl = 0x4a009510, + .cm_l4per_gpio8_clkctrl = 0x4a009518, + .cm_l4per_mmcsd3_clkctrl = 0x4a009520, + .cm_l4per_mmcsd4_clkctrl = 0x4a009528, + .cm_l4per_msprohg_clkctrl = 0x4a009530, + .cm_l4per_slimbus2_clkctrl = 0x4a009538, + .cm_l4per_uart1_clkctrl = 0x4a009540, + .cm_l4per_uart2_clkctrl = 0x4a009548, + .cm_l4per_uart3_clkctrl = 0x4a009550, + .cm_l4per_uart4_clkctrl = 0x4a009558, + .cm_l4per_mmcsd5_clkctrl = 0x4a009560, + .cm_l4per_i2c5_clkctrl = 0x4a009568, + .cm_l4per_uart5_clkctrl = 0x4a009570, + .cm_l4per_uart6_clkctrl = 0x4a009578, + .cm_l4sec_clkstctrl = 0x4a009580, + .cm_l4sec_staticdep = 0x4a009584, + .cm_l4sec_dynamicdep = 0x4a009588, + .cm_l4sec_aes1_clkctrl = 0x4a0095a0, + .cm_l4sec_aes2_clkctrl = 0x4a0095a8, + .cm_l4sec_des3des_clkctrl = 0x4a0095b0, + .cm_l4sec_pkaeip29_clkctrl = 0x4a0095b8, + .cm_l4sec_rng_clkctrl = 0x4a0095c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0095c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0095d8, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4ae0610c, + .cm_sys_clksel = 0x4ae06110, + .cm_wkup_clkstctrl = 0x4ae07800, + .cm_wkup_l4wkup_clkctrl = 0x4ae07820, + .cm_wkup_wdtimer1_clkctrl = 0x4ae07828, + .cm_wkup_wdtimer2_clkctrl = 0x4ae07830, + .cm_wkup_gpio1_clkctrl = 0x4ae07838, + .cm_wkup_gptimer1_clkctrl = 0x4ae07840, + .cm_wkup_gptimer12_clkctrl = 0x4ae07848, + .cm_wkup_synctimer_clkctrl = 0x4ae07850, + .cm_wkup_usim_clkctrl = 0x4ae07858, + .cm_wkup_sarram_clkctrl = 0x4ae07860, + .cm_wkup_keyboard_clkctrl = 0x4ae07878, + .cm_wkup_rtc_clkctrl = 0x4ae07880, + .cm_wkup_bandgap_clkctrl = 0x4ae07888, + .cm_wkupaon_scrm_clkctrl = 0x4ae07890, + .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07898, + .prm_rstctrl = 0x4ae07b00, + .prm_rstst = 0x4ae07b04, + .prm_vc_val_bypass = 0x4ae07ba0, + .prm_vc_cfg_i2c_mode = 0x4ae07bb4, + .prm_vc_cfg_i2c_clk = 0x4ae07bb8, + .prm_sldo_core_setup = 0x4ae07bc4, + .prm_sldo_core_ctrl = 0x4ae07bc8, + .prm_sldo_mpu_setup = 0x4ae07bcc, + .prm_sldo_mpu_ctrl = 0x4ae07bd0, + .prm_sldo_mm_setup = 0x4ae07bd4, + .prm_sldo_mm_ctrl = 0x4ae07bd8, +}; + +struct omap_sys_ctrl_regs const omap5_ctrl = { + .control_status = 0x4A002134, + .control_paconf_global = 0x4A002DA0, + .control_paconf_mode = 0x4A002DA4, + .control_smart1io_padconf_0 = 0x4A002DA8, + .control_smart1io_padconf_1 = 0x4A002DAC, + .control_smart1io_padconf_2 = 0x4A002DB0, + .control_smart2io_padconf_0 = 0x4A002DB4, + .control_smart2io_padconf_1 = 0x4A002DB8, + .control_smart2io_padconf_2 = 0x4A002DBC, + .control_smart3io_padconf_0 = 0x4A002DC0, + .control_smart3io_padconf_1 = 0x4A002DC4, + .control_pbias = 0x4A002E00, + .control_i2c_0 = 0x4A002E04, + .control_camera_rx = 0x4A002E08, + .control_hdmi_tx_phy = 0x4A002E0C, + .control_uniportm = 0x4A002E10, + .control_dsiphy = 0x4A002E14, + .control_mcbsplp = 0x4A002E18, + .control_usb2phycore = 0x4A002E1C, + .control_hdmi_1 = 0x4A002E20, + .control_hsi = 0x4A002E24, + .control_ddr3ch1_0 = 0x4A002E30, + .control_ddr3ch2_0 = 0x4A002E34, + .control_ddrch1_0 = 0x4A002E38, + .control_ddrch1_1 = 0x4A002E3C, + .control_ddrch2_0 = 0x4A002E40, + .control_ddrch2_1 = 0x4A002E44, + .control_lpddr2ch1_0 = 0x4A002E48, + .control_lpddr2ch1_1 = 0x4A002E4C, + .control_ddrio_0 = 0x4A002E50, + .control_ddrio_1 = 0x4A002E54, + .control_ddrio_2 = 0x4A002E58, + .control_hyst_1 = 0x4A002E5C, + .control_usbb_hsic_control = 0x4A002E60, + .control_c2c = 0x4A002E64, + .control_core_control_spare_rw = 0x4A002E68, + .control_core_control_spare_r = 0x4A002E6C, + .control_core_control_spare_r_c0 = 0x4A002E70, + .control_srcomp_north_side = 0x4A002E74, + .control_srcomp_south_side = 0x4A002E78, + .control_srcomp_east_side = 0x4A002E7C, + .control_srcomp_west_side = 0x4A002E80, + .control_srcomp_code_latch = 0x4A002E84, + .control_port_emif1_sdram_config = 0x4AE0C110, + .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, + .control_port_emif2_sdram_config = 0x4AE0C118, + .control_emif1_sdram_config_ext = 0x4AE0C144, + .control_emif2_sdram_config_ext = 0x4AE0C148, + .control_smart1nopmio_padconf_0 = 0x4AE0CDA0, + .control_smart1nopmio_padconf_1 = 0x4AE0CDA4, + .control_padconf_mode = 0x4AE0CDA8, + .control_xtal_oscillator = 0x4AE0CDAC, + .control_i2c_2 = 0x4AE0CDB0, + .control_ckobuffer = 0x4AE0CDB4, + .control_wkup_control_spare_rw = 0x4AE0CDB8, + .control_wkup_control_spare_r = 0x4AE0CDBC, + .control_wkup_control_spare_r_c0 = 0x4AE0CDC0, + .control_srcomp_east_side_wkup = 0x4AE0CDC4, + .control_efuse_1 = 0x4AE0CDC8, + .control_efuse_2 = 0x4AE0CDCC, + .control_efuse_3 = 0x4AE0CDD0, + .control_efuse_4 = 0x4AE0CDD4, + .control_efuse_5 = 0x4AE0CDD8, + .control_efuse_6 = 0x4AE0CDDC, + .control_efuse_7 = 0x4AE0CDE0, + .control_efuse_8 = 0x4AE0CDE4, + .control_efuse_9 = 0x4AE0CDE8, + .control_efuse_10 = 0x4AE0CDEC, + .control_efuse_11 = 0x4AE0CDF0, + .control_efuse_12 = 0x4AE0CDF4, + .control_efuse_13 = 0x4AE0CDF8, +}; + +struct omap_sys_ctrl_regs const dra7xx_ctrl = { + .control_status = 0x4A002134, + .control_core_mmr_lock1 = 0x4A002540, + .control_core_mmr_lock2 = 0x4A002544, + .control_core_mmr_lock3 = 0x4A002548, + .control_core_mmr_lock4 = 0x4A00254C, + .control_core_mmr_lock5 = 0x4A002550, + .control_core_control_io1 = 0x4A002554, + .control_core_control_io2 = 0x4A002558, + .control_paconf_global = 0x4A002DA0, + .control_paconf_mode = 0x4A002DA4, + .control_smart1io_padconf_0 = 0x4A002DA8, + .control_smart1io_padconf_1 = 0x4A002DAC, + .control_smart1io_padconf_2 = 0x4A002DB0, + .control_smart2io_padconf_0 = 0x4A002DB4, + .control_smart2io_padconf_1 = 0x4A002DB8, + .control_smart2io_padconf_2 = 0x4A002DBC, + .control_smart3io_padconf_0 = 0x4A002DC0, + .control_smart3io_padconf_1 = 0x4A002DC4, + .control_pbias = 0x4A002E00, + .control_i2c_0 = 0x4A002E04, + .control_camera_rx = 0x4A002E08, + .control_hdmi_tx_phy = 0x4A002E0C, + .control_uniportm = 0x4A002E10, + .control_dsiphy = 0x4A002E14, + .control_mcbsplp = 0x4A002E18, + .control_usb2phycore = 0x4A002E1C, + .control_hdmi_1 = 0x4A002E20, + .control_hsi = 0x4A002E24, + .control_ddr3ch1_0 = 0x4A002E30, + .control_ddr3ch2_0 = 0x4A002E34, + .control_ddrch1_0 = 0x4A002E38, + .control_ddrch1_1 = 0x4A002E3C, + .control_ddrch2_0 = 0x4A002E40, + .control_ddrch2_1 = 0x4A002E44, + .control_lpddr2ch1_0 = 0x4A002E48, + .control_lpddr2ch1_1 = 0x4A002E4C, + .control_ddrio_0 = 0x4A002E50, + .control_ddrio_1 = 0x4A002E54, + .control_ddrio_2 = 0x4A002E58, + .control_hyst_1 = 0x4A002E5C, + .control_usbb_hsic_control = 0x4A002E60, + .control_c2c = 0x4A002E64, + .control_core_control_spare_rw = 0x4A002E68, + .control_core_control_spare_r = 0x4A002E6C, + .control_core_control_spare_r_c0 = 0x4A002E70, + .control_srcomp_north_side = 0x4A002E74, + .control_srcomp_south_side = 0x4A002E78, + .control_srcomp_east_side = 0x4A002E7C, + .control_srcomp_west_side = 0x4A002E80, + .control_srcomp_code_latch = 0x4A002E84, + .control_padconf_core_base = 0x4A003400, + .control_port_emif1_sdram_config = 0x4AE0C110, + .control_port_emif1_lpddr2_nvm_config = 0x4AE0C114, + .control_port_emif2_sdram_config = 0x4AE0C118, + .control_emif1_sdram_config_ext = 0x4AE0C144, + .control_emif2_sdram_config_ext = 0x4AE0C148, + .control_padconf_mode = 0x4AE0C5A0, + .control_xtal_oscillator = 0x4AE0C5A4, + .control_i2c_2 = 0x4AE0C5A8, + .control_ckobuffer = 0x4AE0C5AC, + .control_wkup_control_spare_rw = 0x4AE0C5B0, + .control_wkup_control_spare_r = 0x4AE0C5B4, + .control_wkup_control_spare_r_c0 = 0x4AE0C5B8, + .control_srcomp_east_side_wkup = 0x4AE0C5BC, + .control_efuse_1 = 0x4AE0C5C0, + .control_efuse_2 = 0x4AE0C5C4, + .control_efuse_3 = 0x4AE0C5C8, + .control_efuse_4 = 0x4AE0C5CC, + .control_efuse_13 = 0x4AE0C5F0, +}; + +struct prcm_regs const omap5_es2_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a004100, + .cm_clksel_abe = 0x4a004108, + .cm_dll_ctrl = 0x4a004110, + .cm_clkmode_dpll_core = 0x4a004120, + .cm_idlest_dpll_core = 0x4a004124, + .cm_autoidle_dpll_core = 0x4a004128, + .cm_clksel_dpll_core = 0x4a00412c, + .cm_div_m2_dpll_core = 0x4a004130, + .cm_div_m3_dpll_core = 0x4a004134, + .cm_div_h11_dpll_core = 0x4a004138, + .cm_div_h12_dpll_core = 0x4a00413c, + .cm_div_h13_dpll_core = 0x4a004140, + .cm_div_h14_dpll_core = 0x4a004144, + .cm_ssc_deltamstep_dpll_core = 0x4a004148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00414c, + .cm_div_h21_dpll_core = 0x4a004150, + .cm_div_h22_dpllcore = 0x4a004154, + .cm_div_h23_dpll_core = 0x4a004158, + .cm_div_h24_dpll_core = 0x4a00415c, + .cm_clkmode_dpll_mpu = 0x4a004160, + .cm_idlest_dpll_mpu = 0x4a004164, + .cm_autoidle_dpll_mpu = 0x4a004168, + .cm_clksel_dpll_mpu = 0x4a00416c, + .cm_div_m2_dpll_mpu = 0x4a004170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a004188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00418c, + .cm_bypclk_dpll_mpu = 0x4a00419c, + .cm_clkmode_dpll_iva = 0x4a0041a0, + .cm_idlest_dpll_iva = 0x4a0041a4, + .cm_autoidle_dpll_iva = 0x4a0041a8, + .cm_clksel_dpll_iva = 0x4a0041ac, + .cm_div_h11_dpll_iva = 0x4a0041b8, + .cm_div_h12_dpll_iva = 0x4a0041bc, + .cm_ssc_deltamstep_dpll_iva = 0x4a0041c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0041cc, + .cm_bypclk_dpll_iva = 0x4a0041dc, + .cm_clkmode_dpll_abe = 0x4a0041e0, + .cm_idlest_dpll_abe = 0x4a0041e4, + .cm_autoidle_dpll_abe = 0x4a0041e8, + .cm_clksel_dpll_abe = 0x4a0041ec, + .cm_div_m2_dpll_abe = 0x4a0041f0, + .cm_div_m3_dpll_abe = 0x4a0041f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a004208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00420c, + .cm_clkmode_dpll_ddrphy = 0x4a004220, + .cm_idlest_dpll_ddrphy = 0x4a004224, + .cm_autoidle_dpll_ddrphy = 0x4a004228, + .cm_clksel_dpll_ddrphy = 0x4a00422c, + .cm_div_m2_dpll_ddrphy = 0x4a004230, + .cm_div_h11_dpll_ddrphy = 0x4a004238, + .cm_div_h12_dpll_ddrphy = 0x4a00423c, + .cm_div_h13_dpll_ddrphy = 0x4a004240, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a004248, + .cm_shadow_freq_config1 = 0x4a004260, + .cm_mpu_mpu_clkctrl = 0x4a004320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a004400, + .cm_dsp_dsp_clkctrl = 0x4a004420, + + /* cm1.abe */ + .cm1_abe_clkstctrl = 0x4a004500, + .cm1_abe_l4abe_clkctrl = 0x4a004520, + .cm1_abe_aess_clkctrl = 0x4a004528, + .cm1_abe_pdm_clkctrl = 0x4a004530, + .cm1_abe_dmic_clkctrl = 0x4a004538, + .cm1_abe_mcasp_clkctrl = 0x4a004540, + .cm1_abe_mcbsp1_clkctrl = 0x4a004548, + .cm1_abe_mcbsp2_clkctrl = 0x4a004550, + .cm1_abe_mcbsp3_clkctrl = 0x4a004558, + .cm1_abe_slimbus_clkctrl = 0x4a004560, + .cm1_abe_timer5_clkctrl = 0x4a004568, + .cm1_abe_timer6_clkctrl = 0x4a004570, + .cm1_abe_timer7_clkctrl = 0x4a004578, + .cm1_abe_timer8_clkctrl = 0x4a004580, + .cm1_abe_wdt3_clkctrl = 0x4a004588, + + + + /* cm2.ckgen */ + .cm_clksel_mpu_m3_iss_root = 0x4a008100, + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_scale_fclk = 0x4a008108, + .cm_core_dvfs_perf1 = 0x4a008110, + .cm_core_dvfs_perf2 = 0x4a008114, + .cm_core_dvfs_perf3 = 0x4a008118, + .cm_core_dvfs_perf4 = 0x4a00811c, + .cm_core_dvfs_current = 0x4a008124, + .cm_iva_dvfs_perf_tesla = 0x4a008128, + .cm_iva_dvfs_perf_ivahd = 0x4a00812c, + .cm_iva_dvfs_perf_abe = 0x4a008130, + .cm_iva_dvfs_current = 0x4a008138, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_h11_dpll_per = 0x4a008158, + .cm_div_h12_dpll_per = 0x4a00815c, + .cm_div_h13_dpll_per = 0x4a008160, + .cm_div_h14_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_emu_override_dpll_per = 0x4a008170, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_unipro = 0x4a0081c0, + .cm_idlest_dpll_unipro = 0x4a0081c4, + .cm_autoidle_dpll_unipro = 0x4a0081c8, + .cm_clksel_dpll_unipro = 0x4a0081cc, + .cm_div_m2_dpll_unipro = 0x4a0081d0, + .cm_ssc_deltamstep_dpll_unipro = 0x4a0081e8, + .cm_ssc_modfreqdiv_dpll_unipro = 0x4a0081ec, + .cm_coreaon_bandgap_clkctrl = 0x4a008648, + .cm_coreaon_io_srcomp_clkctrl = 0x4a008650, + + /* cm2.core */ + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_2_clkstctrl = 0x4a008800, + .cm_l3_2_dynamicdep = 0x4a008808, + .cm_l3_2_l3_2_clkctrl = 0x4a008820, + .cm_l3_gpmc_clkctrl = 0x4a008828, + .cm_l3_2_ocmc_ram_clkctrl = 0x4a008830, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_memif_emif_h1_clkctrl = 0x4a008b50, + .cm_memif_emif_h2_clkctrl = 0x4a008b58, + .cm_memif_dll_h_clkctrl = 0x4a008b60, + .cm_c2c_clkstctrl = 0x4a008c00, + .cm_c2c_staticdep = 0x4a008c04, + .cm_c2c_dynamicdep = 0x4a008c08, + .cm_c2c_sad2d_clkctrl = 0x4a008c20, + .cm_c2c_modem_icr_clkctrl = 0x4a008c28, + .cm_c2c_sad2d_fw_clkctrl = 0x4a008c30, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, + .cm_l4per_clkstctrl = 0x4a009000, + .cm_l4per_dynamicdep = 0x4a009008, + .cm_l4per_adc_clkctrl = 0x4a009020, + .cm_l4per_gptimer10_clkctrl = 0x4a009028, + .cm_l4per_gptimer11_clkctrl = 0x4a009030, + .cm_l4per_gptimer2_clkctrl = 0x4a009038, + .cm_l4per_gptimer3_clkctrl = 0x4a009040, + .cm_l4per_gptimer4_clkctrl = 0x4a009048, + .cm_l4per_gptimer9_clkctrl = 0x4a009050, + .cm_l4per_elm_clkctrl = 0x4a009058, + .cm_l4per_gpio2_clkctrl = 0x4a009060, + .cm_l4per_gpio3_clkctrl = 0x4a009068, + .cm_l4per_gpio4_clkctrl = 0x4a009070, + .cm_l4per_gpio5_clkctrl = 0x4a009078, + .cm_l4per_gpio6_clkctrl = 0x4a009080, + .cm_l4per_hdq1w_clkctrl = 0x4a009088, + .cm_l4per_hecc1_clkctrl = 0x4a009090, + .cm_l4per_hecc2_clkctrl = 0x4a009098, + .cm_l4per_i2c1_clkctrl = 0x4a0090a0, + .cm_l4per_i2c2_clkctrl = 0x4a0090a8, + .cm_l4per_i2c3_clkctrl = 0x4a0090b0, + .cm_l4per_i2c4_clkctrl = 0x4a0090b8, + .cm_l4per_l4per_clkctrl = 0x4a0090c0, + .cm_l4per_mcasp2_clkctrl = 0x4a0090d0, + .cm_l4per_mcasp3_clkctrl = 0x4a0090d8, + .cm_l4per_mgate_clkctrl = 0x4a0090e8, + .cm_l4per_mcspi1_clkctrl = 0x4a0090f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0090f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009100, + .cm_l4per_mcspi4_clkctrl = 0x4a009108, + .cm_l4per_gpio7_clkctrl = 0x4a009110, + .cm_l4per_gpio8_clkctrl = 0x4a009118, + .cm_l4per_mmcsd3_clkctrl = 0x4a009120, + .cm_l4per_mmcsd4_clkctrl = 0x4a009128, + .cm_l4per_msprohg_clkctrl = 0x4a009130, + .cm_l4per_slimbus2_clkctrl = 0x4a009138, + .cm_l4per_uart1_clkctrl = 0x4a009140, + .cm_l4per_uart2_clkctrl = 0x4a009148, + .cm_l4per_uart3_clkctrl = 0x4a009150, + .cm_l4per_uart4_clkctrl = 0x4a009158, + .cm_l4per_mmcsd5_clkctrl = 0x4a009160, + .cm_l4per_i2c5_clkctrl = 0x4a009168, + .cm_l4per_uart5_clkctrl = 0x4a009170, + .cm_l4per_uart6_clkctrl = 0x4a009178, + .cm_l4sec_clkstctrl = 0x4a009180, + .cm_l4sec_staticdep = 0x4a009184, + .cm_l4sec_dynamicdep = 0x4a009188, + .cm_l4sec_aes1_clkctrl = 0x4a0091a0, + .cm_l4sec_aes2_clkctrl = 0x4a0091a8, + .cm_l4sec_des3des_clkctrl = 0x4a0091b0, + .cm_l4sec_pkaeip29_clkctrl = 0x4a0091b8, + .cm_l4sec_rng_clkctrl = 0x4a0091c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0091c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0091d8, + + /* cm2.ivahd */ + .cm_ivahd_clkstctrl = 0x4a009200, + .cm_ivahd_ivahd_clkctrl = 0x4a009220, + .cm_ivahd_sl2_clkctrl = 0x4a009228, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009300, + .cm_cam_iss_clkctrl = 0x4a009320, + .cm_cam_fdif_clkctrl = 0x4a009328, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009400, + .cm_dss_dss_clkctrl = 0x4a009420, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009500, + .cm_sgx_sgx_clkctrl = 0x4a009520, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009600, + + /* cm2.l3init */ + .cm_l3init_hsmmc1_clkctrl = 0x4a009628, + .cm_l3init_hsmmc2_clkctrl = 0x4a009630, + .cm_l3init_hsi_clkctrl = 0x4a009638, + .cm_l3init_hsusbhost_clkctrl = 0x4a009658, + .cm_l3init_hsusbotg_clkctrl = 0x4a009660, + .cm_l3init_hsusbtll_clkctrl = 0x4a009668, + .cm_l3init_p1500_clkctrl = 0x4a009678, + .cm_l3init_fsusb_clkctrl = 0x4a0096d0, + .cm_l3init_ocp2scp1_clkctrl = 0x4a0096e0, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4ae0610c, + .cm_sys_clksel = 0x4ae06110, + .cm_wkup_clkstctrl = 0x4ae07900, + .cm_wkup_l4wkup_clkctrl = 0x4ae07920, + .cm_wkup_wdtimer1_clkctrl = 0x4ae07928, + .cm_wkup_wdtimer2_clkctrl = 0x4ae07930, + .cm_wkup_gpio1_clkctrl = 0x4ae07938, + .cm_wkup_gptimer1_clkctrl = 0x4ae07940, + .cm_wkup_gptimer12_clkctrl = 0x4ae07948, + .cm_wkup_synctimer_clkctrl = 0x4ae07950, + .cm_wkup_usim_clkctrl = 0x4ae07958, + .cm_wkup_sarram_clkctrl = 0x4ae07960, + .cm_wkup_keyboard_clkctrl = 0x4ae07978, + .cm_wkup_rtc_clkctrl = 0x4ae07980, + .cm_wkup_bandgap_clkctrl = 0x4ae07988, + .cm_wkupaon_scrm_clkctrl = 0x4ae07990, + .cm_wkupaon_io_srcomp_clkctrl = 0x4ae07998, + .prm_rstctrl = 0x4ae07c00, + .prm_rstst = 0x4ae07c04, + .prm_vc_val_bypass = 0x4ae07ca0, + .prm_vc_cfg_i2c_mode = 0x4ae07cb4, + .prm_vc_cfg_i2c_clk = 0x4ae07cb8, + + .prm_sldo_core_setup = 0x4ae07cc4, + .prm_sldo_core_ctrl = 0x4ae07cc8, + .prm_sldo_mpu_setup = 0x4ae07ccc, + .prm_sldo_mpu_ctrl = 0x4ae07cd0, + .prm_sldo_mm_setup = 0x4ae07cd4, + .prm_sldo_mm_ctrl = 0x4ae07cd8, +}; + +struct prcm_regs const dra7xx_prcm = { + /* cm1.ckgen */ + .cm_clksel_core = 0x4a005100, + .cm_clksel_abe = 0x4a005108, + .cm_dll_ctrl = 0x4a005110, + .cm_clkmode_dpll_core = 0x4a005120, + .cm_idlest_dpll_core = 0x4a005124, + .cm_autoidle_dpll_core = 0x4a005128, + .cm_clksel_dpll_core = 0x4a00512c, + .cm_div_m2_dpll_core = 0x4a005130, + .cm_div_m3_dpll_core = 0x4a005134, + .cm_div_h11_dpll_core = 0x4a005138, + .cm_div_h12_dpll_core = 0x4a00513c, + .cm_div_h13_dpll_core = 0x4a005140, + .cm_div_h14_dpll_core = 0x4a005144, + .cm_ssc_deltamstep_dpll_core = 0x4a005148, + .cm_ssc_modfreqdiv_dpll_core = 0x4a00514c, + .cm_div_h21_dpll_core = 0x4a005150, + .cm_div_h22_dpllcore = 0x4a005154, + .cm_div_h23_dpll_core = 0x4a005158, + .cm_div_h24_dpll_core = 0x4a00515c, + .cm_clkmode_dpll_mpu = 0x4a005160, + .cm_idlest_dpll_mpu = 0x4a005164, + .cm_autoidle_dpll_mpu = 0x4a005168, + .cm_clksel_dpll_mpu = 0x4a00516c, + .cm_div_m2_dpll_mpu = 0x4a005170, + .cm_ssc_deltamstep_dpll_mpu = 0x4a005188, + .cm_ssc_modfreqdiv_dpll_mpu = 0x4a00518c, + .cm_bypclk_dpll_mpu = 0x4a00519c, + .cm_clkmode_dpll_iva = 0x4a0051a0, + .cm_idlest_dpll_iva = 0x4a0051a4, + .cm_autoidle_dpll_iva = 0x4a0051a8, + .cm_clksel_dpll_iva = 0x4a0051ac, + .cm_ssc_deltamstep_dpll_iva = 0x4a0051c8, + .cm_ssc_modfreqdiv_dpll_iva = 0x4a0051cc, + .cm_bypclk_dpll_iva = 0x4a0051dc, + .cm_clkmode_dpll_abe = 0x4a0051e0, + .cm_idlest_dpll_abe = 0x4a0051e4, + .cm_autoidle_dpll_abe = 0x4a0051e8, + .cm_clksel_dpll_abe = 0x4a0051ec, + .cm_div_m2_dpll_abe = 0x4a0051f0, + .cm_div_m3_dpll_abe = 0x4a0051f4, + .cm_ssc_deltamstep_dpll_abe = 0x4a005208, + .cm_ssc_modfreqdiv_dpll_abe = 0x4a00520c, + .cm_clkmode_dpll_ddrphy = 0x4a005210, + .cm_idlest_dpll_ddrphy = 0x4a005214, + .cm_autoidle_dpll_ddrphy = 0x4a005218, + .cm_clksel_dpll_ddrphy = 0x4a00521c, + .cm_div_m2_dpll_ddrphy = 0x4a005220, + .cm_div_h11_dpll_ddrphy = 0x4a005228, + .cm_ssc_deltamstep_dpll_ddrphy = 0x4a00522c, + .cm_clkmode_dpll_dsp = 0x4a005234, + .cm_shadow_freq_config1 = 0x4a005260, + + /* cm1.mpu */ + .cm_mpu_mpu_clkctrl = 0x4a005320, + + /* cm1.dsp */ + .cm_dsp_clkstctrl = 0x4a005400, + .cm_dsp_dsp_clkctrl = 0x4a005420, + + /* cm2.ckgen */ + .cm_clksel_usb_60mhz = 0x4a008104, + .cm_clkmode_dpll_per = 0x4a008140, + .cm_idlest_dpll_per = 0x4a008144, + .cm_autoidle_dpll_per = 0x4a008148, + .cm_clksel_dpll_per = 0x4a00814c, + .cm_div_m2_dpll_per = 0x4a008150, + .cm_div_m3_dpll_per = 0x4a008154, + .cm_div_h11_dpll_per = 0x4a008158, + .cm_div_h12_dpll_per = 0x4a00815c, + .cm_div_h13_dpll_per = 0x4a008160, + .cm_div_h14_dpll_per = 0x4a008164, + .cm_ssc_deltamstep_dpll_per = 0x4a008168, + .cm_ssc_modfreqdiv_dpll_per = 0x4a00816c, + .cm_clkmode_dpll_usb = 0x4a008180, + .cm_idlest_dpll_usb = 0x4a008184, + .cm_autoidle_dpll_usb = 0x4a008188, + .cm_clksel_dpll_usb = 0x4a00818c, + .cm_div_m2_dpll_usb = 0x4a008190, + .cm_ssc_deltamstep_dpll_usb = 0x4a0081a8, + .cm_ssc_modfreqdiv_dpll_usb = 0x4a0081ac, + .cm_clkdcoldo_dpll_usb = 0x4a0081b4, + .cm_clkmode_dpll_pcie_ref = 0x4a008200, + .cm_clkmode_apll_pcie = 0x4a00821c, + .cm_idlest_apll_pcie = 0x4a008220, + .cm_div_m2_apll_pcie = 0x4a008224, + .cm_clkvcoldo_apll_pcie = 0x4a008228, + + /* cm2.core */ + .cm_l3_1_clkstctrl = 0x4a008700, + .cm_l3_1_dynamicdep = 0x4a008708, + .cm_l3_1_l3_1_clkctrl = 0x4a008720, + .cm_l3_gpmc_clkctrl = 0x4a008728, + .cm_mpu_m3_clkstctrl = 0x4a008900, + .cm_mpu_m3_staticdep = 0x4a008904, + .cm_mpu_m3_dynamicdep = 0x4a008908, + .cm_mpu_m3_mpu_m3_clkctrl = 0x4a008920, + .cm_sdma_clkstctrl = 0x4a008a00, + .cm_sdma_staticdep = 0x4a008a04, + .cm_sdma_dynamicdep = 0x4a008a08, + .cm_sdma_sdma_clkctrl = 0x4a008a20, + .cm_memif_clkstctrl = 0x4a008b00, + .cm_memif_dmm_clkctrl = 0x4a008b20, + .cm_memif_emif_fw_clkctrl = 0x4a008b28, + .cm_memif_emif_1_clkctrl = 0x4a008b30, + .cm_memif_emif_2_clkctrl = 0x4a008b38, + .cm_memif_dll_clkctrl = 0x4a008b40, + .cm_l4cfg_clkstctrl = 0x4a008d00, + .cm_l4cfg_dynamicdep = 0x4a008d08, + .cm_l4cfg_l4_cfg_clkctrl = 0x4a008d20, + .cm_l4cfg_hw_sem_clkctrl = 0x4a008d28, + .cm_l4cfg_mailbox_clkctrl = 0x4a008d30, + .cm_l4cfg_sar_rom_clkctrl = 0x4a008d38, + .cm_l3instr_clkstctrl = 0x4a008e00, + .cm_l3instr_l3_3_clkctrl = 0x4a008e20, + .cm_l3instr_l3_instr_clkctrl = 0x4a008e28, + .cm_l3instr_intrconn_wp1_clkctrl = 0x4a008e40, + + /* cm2.ivahd */ + .cm_ivahd_clkstctrl = 0x4a008f00, + .cm_ivahd_ivahd_clkctrl = 0x4a008f20, + .cm_ivahd_sl2_clkctrl = 0x4a008f28, + + /* cm2.cam */ + .cm_cam_clkstctrl = 0x4a009000, + .cm_cam_vip1_clkctrl = 0x4a009020, + .cm_cam_vip2_clkctrl = 0x4a009028, + .cm_cam_vip3_clkctrl = 0x4a009030, + .cm_cam_lvdsrx_clkctrl = 0x4a009038, + .cm_cam_csi1_clkctrl = 0x4a009040, + .cm_cam_csi2_clkctrl = 0x4a009048, + + /* cm2.dss */ + .cm_dss_clkstctrl = 0x4a009100, + .cm_dss_dss_clkctrl = 0x4a009120, + + /* cm2.sgx */ + .cm_sgx_clkstctrl = 0x4a009200, + .cm_sgx_sgx_clkctrl = 0x4a009220, + + /* cm2.l3init */ + .cm_l3init_clkstctrl = 0x4a009300, + + /* cm2.l3init */ + .cm_l3init_hsmmc1_clkctrl = 0x4a009328, + .cm_l3init_hsmmc2_clkctrl = 0x4a009330, + .cm_l3init_hsusbhost_clkctrl = 0x4a009340, + .cm_l3init_hsusbotg_clkctrl = 0x4a009348, + .cm_l3init_hsusbtll_clkctrl = 0x4a009350, + .cm_l3init_ocp2scp1_clkctrl = 0x4a0093e0, + + /* cm2.l4per */ + .cm_l4per_clkstctrl = 0x4a009700, + .cm_l4per_dynamicdep = 0x4a009708, + .cm_l4per_gptimer10_clkctrl = 0x4a009728, + .cm_l4per_gptimer11_clkctrl = 0x4a009730, + .cm_l4per_gptimer2_clkctrl = 0x4a009738, + .cm_l4per_gptimer3_clkctrl = 0x4a009740, + .cm_l4per_gptimer4_clkctrl = 0x4a009748, + .cm_l4per_gptimer9_clkctrl = 0x4a009750, + .cm_l4per_elm_clkctrl = 0x4a009758, + .cm_l4per_gpio2_clkctrl = 0x4a009760, + .cm_l4per_gpio3_clkctrl = 0x4a009768, + .cm_l4per_gpio4_clkctrl = 0x4a009770, + .cm_l4per_gpio5_clkctrl = 0x4a009778, + .cm_l4per_gpio6_clkctrl = 0x4a009780, + .cm_l4per_hdq1w_clkctrl = 0x4a009788, + .cm_l4per_i2c1_clkctrl = 0x4a0097a0, + .cm_l4per_i2c2_clkctrl = 0x4a0097a8, + .cm_l4per_i2c3_clkctrl = 0x4a0097b0, + .cm_l4per_i2c4_clkctrl = 0x4a0097b8, + .cm_l4per_l4per_clkctrl = 0x4a0097c0, + .cm_l4per_mcspi1_clkctrl = 0x4a0097f0, + .cm_l4per_mcspi2_clkctrl = 0x4a0097f8, + .cm_l4per_mcspi3_clkctrl = 0x4a009800, + .cm_l4per_mcspi4_clkctrl = 0x4a009808, + .cm_l4per_gpio7_clkctrl = 0x4a009810, + .cm_l4per_gpio8_clkctrl = 0x4a009818, + .cm_l4per_mmcsd3_clkctrl = 0x4a009820, + .cm_l4per_mmcsd4_clkctrl = 0x4a009828, + .cm_l4per_uart1_clkctrl = 0x4a009840, + .cm_l4per_uart2_clkctrl = 0x4a009848, + .cm_l4per_uart3_clkctrl = 0x4a009850, + .cm_l4per_uart4_clkctrl = 0x4a009858, + .cm_l4per_uart5_clkctrl = 0x4a009870, + .cm_l4sec_clkstctrl = 0x4a009880, + .cm_l4sec_staticdep = 0x4a009884, + .cm_l4sec_dynamicdep = 0x4a009888, + .cm_l4sec_aes1_clkctrl = 0x4a0098a0, + .cm_l4sec_aes2_clkctrl = 0x4a0098a8, + .cm_l4sec_des3des_clkctrl = 0x4a0098b0, + .cm_l4sec_rng_clkctrl = 0x4a0098c0, + .cm_l4sec_sha2md51_clkctrl = 0x4a0098c8, + .cm_l4sec_cryptodma_clkctrl = 0x4a0098d8, + + /* l4 wkup regs */ + .cm_abe_pll_ref_clksel = 0x4ae0610c, + .cm_sys_clksel = 0x4ae06110, + .cm_wkup_clkstctrl = 0x4ae07800, + .cm_wkup_l4wkup_clkctrl = 0x4ae07820, + .cm_wkup_wdtimer1_clkctrl = 0x4ae07828, + .cm_wkup_wdtimer2_clkctrl = 0x4ae07830, + .cm_wkup_gpio1_clkctrl = 0x4ae07838, + .cm_wkup_gptimer1_clkctrl = 0x4ae07840, + .cm_wkup_gptimer12_clkctrl = 0x4ae07848, + .cm_wkup_sarram_clkctrl = 0x4ae07860, + .cm_wkup_keyboard_clkctrl = 0x4ae07878, + .cm_wkupaon_scrm_clkctrl = 0x4ae07890, + .prm_rstctrl = 0x4ae07d00, + .prm_rstst = 0x4ae07d04, + .prm_vc_val_bypass = 0x4ae07da0, + .prm_vc_cfg_i2c_mode = 0x4ae07db4, + .prm_vc_cfg_i2c_clk = 0x4ae07db8, +}; diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index 6ebdf5fbfd..6b461e4846 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -67,6 +67,25 @@ const struct emif_regs emif_regs_532_mhz_2cs = { .emif_ddr_ext_phy_ctrl_5 = 0x04010040 }; +const struct emif_regs emif_regs_532_mhz_2cs_es2 = { + .sdram_config_init = 0x80800EBA, + .sdram_config = 0x808022BA, + .ref_ctrl = 0x0000081A, + .sdram_tim1 = 0x772F6873, + .sdram_tim2 = 0x304a129a, + .sdram_tim3 = 0x02f7e45f, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x100b3215, + .temp_alert_config = 0x08000a05, + .emif_ddr_phy_ctlr_1_init = 0x0E30400d, + .emif_ddr_phy_ctlr_1 = 0x0E30400d, + .emif_ddr_ext_phy_ctrl_1 = 0x04020080, + .emif_ddr_ext_phy_ctrl_2 = 0x28C518A3, + .emif_ddr_ext_phy_ctrl_3 = 0x518A3146, + .emif_ddr_ext_phy_ctrl_4 = 0x0014628C, + .emif_ddr_ext_phy_ctrl_5 = 0xC330CC33, +}; + const struct emif_regs emif_regs_266_mhz_2cs = { .sdram_config_init = 0x80800EBA, .sdram_config = 0x808022BA, @@ -109,13 +128,111 @@ const struct emif_regs emif_regs_ddr3_532_mhz_1cs = { .emif_rd_wr_exec_thresh = 0x00000305 }; +const struct emif_regs emif_regs_ddr3_532_mhz_1cs_es2 = { + .sdram_config_init = 0x61851B32, + .sdram_config = 0x61851B32, + .ref_ctrl = 0x00001035, + .sdram_tim1 = 0xCCCF36B3, + .sdram_tim2 = 0x308F7FDA, + .sdram_tim3 = 0x027F88A8, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x1007190B, + .temp_alert_config = 0x00000000, + .emif_ddr_phy_ctlr_1_init = 0x0030400A, + .emif_ddr_phy_ctlr_1 = 0x0034400A, + .emif_ddr_ext_phy_ctrl_1 = 0x04040100, + .emif_ddr_ext_phy_ctrl_2 = 0x00000000, + .emif_ddr_ext_phy_ctrl_3 = 0x00000000, + .emif_ddr_ext_phy_ctrl_4 = 0x00000000, + .emif_ddr_ext_phy_ctrl_5 = 0x4350D435, + .emif_rd_wr_lvl_rmp_win = 0x00000000, + .emif_rd_wr_lvl_rmp_ctl = 0x80000000, + .emif_rd_wr_lvl_ctl = 0x00000000, + .emif_rd_wr_exec_thresh = 0x40000305 +}; + const struct dmm_lisa_map_regs lisa_map_4G_x_2_x_2 = { .dmm_lisa_map_0 = 0x0, .dmm_lisa_map_1 = 0x0, .dmm_lisa_map_2 = 0x80740300, - .dmm_lisa_map_3 = 0xFF020100 + .dmm_lisa_map_3 = 0xFF020100, + .is_ma_present = 0x1 +}; + +const struct dmm_lisa_map_regs lisa_map_512M_x_1 = { + .dmm_lisa_map_0 = 0x0, + .dmm_lisa_map_1 = 0x0, + .dmm_lisa_map_2 = 0x0, + .dmm_lisa_map_3 = 0x80500100, + .is_ma_present = 0x1 +}; + +static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) +{ + switch (omap_revision()) { + case OMAP5430_ES1_0: + *regs = &emif_regs_532_mhz_2cs; + break; + case OMAP5432_ES1_0: + *regs = &emif_regs_ddr3_532_mhz_1cs; + break; + case OMAP5430_ES2_0: + *regs = &emif_regs_532_mhz_2cs_es2; + break; + case OMAP5432_ES2_0: + case DRA752_ES1_0: + default: + *regs = &emif_regs_ddr3_532_mhz_1cs_es2; + } +} + +void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) + __attribute__((weak, alias("emif_get_reg_dump_sdp"))); + +static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs + **dmm_lisa_regs) +{ + switch (omap_revision()) { + case OMAP5430_ES1_0: + case OMAP5430_ES2_0: + case OMAP5432_ES1_0: + case OMAP5432_ES2_0: + *dmm_lisa_regs = &lisa_map_4G_x_2_x_2; + break; + case DRA752_ES1_0: + default: + *dmm_lisa_regs = &lisa_map_512M_x_1; + } + +} + +void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) + __attribute__((weak, alias("emif_get_dmm_regs_sdp"))); +#else + +static const struct lpddr2_device_details dev_4G_S4_details = { + .type = LPDDR2_TYPE_S4, + .density = LPDDR2_DENSITY_4Gb, + .io_width = LPDDR2_IO_WIDTH_32, + .manufacturer = LPDDR2_MANUFACTURER_SAMSUNG }; +static void emif_get_device_details_sdp(u32 emif_nr, + struct lpddr2_device_details *cs0_device_details, + struct lpddr2_device_details *cs1_device_details) +{ + /* EMIF1 & EMIF2 have identical configuration */ + *cs0_device_details = dev_4G_S4_details; + *cs1_device_details = dev_4G_S4_details; +} + +void emif_get_device_details(u32 emif_nr, + struct lpddr2_device_details *cs0_device_details, + struct lpddr2_device_details *cs1_device_details) + __attribute__((weak, alias("emif_get_device_details_sdp"))); + +#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ + const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x01004010, 0x00001004, @@ -138,7 +255,7 @@ const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x00000077 }; -const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { +const u32 ddr3_ext_phy_ctrl_const_base_es1[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x01004010, 0x00001004, 0x04010040, @@ -160,54 +277,64 @@ const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG] = { 0x00000057 }; -static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs) -{ - if (omap_revision() == OMAP5432_ES1_0) - *regs = &emif_regs_ddr3_532_mhz_1cs; - else - *regs = &emif_regs_532_mhz_2cs; -} -void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) - __attribute__((weak, alias("emif_get_reg_dump_sdp"))); - -static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs - **dmm_lisa_regs) -{ - *dmm_lisa_regs = &lisa_map_4G_x_2_x_2; -} - -void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) - __attribute__((weak, alias("emif_get_dmm_regs_sdp"))); - -#else +const u32 ddr3_ext_phy_ctrl_const_base_es2[EMIF_EXT_PHY_CTRL_CONST_REG] = { + 0x50D4350D, + 0x00000D43, + 0x04010040, + 0x01004010, + 0x00001004, + 0x00000000, + 0x00000000, + 0x00000000, + 0x80080080, + 0x00800800, + 0x08102040, + 0x00000002, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000057 +}; -static const struct lpddr2_device_details dev_4G_S4_details = { - .type = LPDDR2_TYPE_S4, - .density = LPDDR2_DENSITY_4Gb, - .io_width = LPDDR2_IO_WIDTH_32, - .manufacturer = LPDDR2_MANUFACTURER_SAMSUNG +const struct lpddr2_mr_regs mr_regs = { + .mr1 = MR1_BL_8_BT_SEQ_WRAP_EN_NWR_8, + .mr2 = 0x6, + .mr3 = 0x1, + .mr10 = MR10_ZQ_ZQINIT, + .mr16 = MR16_REF_FULL_ARRAY }; -static void emif_get_device_details_sdp(u32 emif_nr, - struct lpddr2_device_details *cs0_device_details, - struct lpddr2_device_details *cs1_device_details) +static void emif_get_ext_phy_ctrl_const_regs(const u32 **regs) { - /* EMIF1 & EMIF2 have identical configuration */ - *cs0_device_details = dev_4G_S4_details; - *cs1_device_details = dev_4G_S4_details; -} + switch (omap_revision()) { + case OMAP5430_ES1_0: + case OMAP5430_ES2_0: + *regs = ext_phy_ctrl_const_base; + break; + case OMAP5432_ES1_0: + *regs = ddr3_ext_phy_ctrl_const_base_es1; + break; + case OMAP5432_ES2_0: + case DRA752_ES1_0: + default: + *regs = ddr3_ext_phy_ctrl_const_base_es2; -void emif_get_device_details(u32 emif_nr, - struct lpddr2_device_details *cs0_device_details, - struct lpddr2_device_details *cs1_device_details) - __attribute__((weak, alias("emif_get_device_details_sdp"))); + } +} -#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */ +void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs) +{ + *regs = &mr_regs; +} void do_ext_phy_settings(u32 base, const struct emif_regs *regs) { u32 *ext_phy_ctrl_base = 0; u32 *emif_ext_phy_ctrl_base = 0; + const u32 *ext_phy_ctrl_const_regs; u32 i = 0; struct emif_reg_struct *emif = (struct emif_reg_struct *)base; @@ -226,12 +353,13 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs) * external phy 6-24 registers do not change with * ddr frequency */ + emif_get_ext_phy_ctrl_const_regs(&ext_phy_ctrl_const_regs); for (i = 0; i < EMIF_EXT_PHY_CTRL_CONST_REG; i++) { - writel(ext_phy_ctrl_const_base[i], - emif_ext_phy_ctrl_base++); + writel(ext_phy_ctrl_const_regs[i], + emif_ext_phy_ctrl_base++); /* Update shadow registers */ - writel(ext_phy_ctrl_const_base[i], - emif_ext_phy_ctrl_base++); + writel(ext_phy_ctrl_const_regs[i], + emif_ext_phy_ctrl_base++); } } diff --git a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds index 7cd409cca2..79cc93cb57 100644 --- a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds +++ b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds @@ -46,7 +46,7 @@ SECTIONS __bss_start = .; *(.bss*) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } >.sdram . = ALIGN(8); diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S index 6b59529d5d..c0e184994a 100644 --- a/arch/arm/cpu/armv7/start.S +++ b/arch/arm/cpu/armv7/start.S @@ -96,7 +96,7 @@ _image_copy_end_ofs: .globl _bss_end_ofs _bss_end_ofs: - .word __bss_end__ - _start + .word __bss_end - _start .globl _end_ofs _end_ofs: @@ -309,6 +309,31 @@ ENTRY(cpu_init_cp15) orr r0, r0, #0x00001000 @ set bit 12 (I) I-cache #endif mcr p15, 0, r0, c1, c0, 0 + +#ifdef CONFIG_ARM_ERRATA_716044 + mrc p15, 0, r0, c1, c0, 0 @ read system control register + orr r0, r0, #1 << 11 @ set bit #11 + mcr p15, 0, r0, c1, c0, 0 @ write system control register +#endif + +#ifdef CONFIG_ARM_ERRATA_742230 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 4 @ set bit #4 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register +#endif + +#ifdef CONFIG_ARM_ERRATA_743622 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 6 @ set bit #6 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register +#endif + +#ifdef CONFIG_ARM_ERRATA_751472 + mrc p15, 0, r0, c15, c0, 1 @ read diagnostic register + orr r0, r0, #1 << 11 @ set bit #11 + mcr p15, 0, r0, c15, c0, 1 @ write diagnostic register +#endif + mov pc, lr @ back to my caller ENDPROC(cpu_init_cp15) diff --git a/arch/arm/cpu/armv7/tegra20/Makefile b/arch/arm/cpu/armv7/tegra20/Makefile index 54ed8c48b4..c8a8504e16 100644 --- a/arch/arm/cpu/armv7/tegra20/Makefile +++ b/arch/arm/cpu/armv7/tegra20/Makefile @@ -27,7 +27,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o COBJS-$(CONFIG_PWM_TEGRA) += pwm.o COBJS-$(CONFIG_VIDEO_TEGRA) += display.o diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c deleted file mode 100644 index 1bccf2b0b2..0000000000 --- a/arch/arm/cpu/armv7/tegra20/usb.c +++ /dev/null @@ -1,567 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm-generic/gpio.h> -#include <asm/arch/clock.h> -#include <asm/arch/gpio.h> -#include <asm/arch/pinmux.h> -#include <asm/arch/tegra.h> -#include <asm/arch/usb.h> -#include <usb/ulpi.h> -#include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra/sys_proto.h> -#include <asm/arch-tegra/uart.h> -#include <libfdt.h> -#include <fdtdec.h> - -#ifdef CONFIG_USB_ULPI - #ifndef CONFIG_USB_ULPI_VIEWPORT - #error "To use CONFIG_USB_ULPI on Tegra Boards you have to also \ - define CONFIG_USB_ULPI_VIEWPORT" - #endif -#endif - -enum { - USB_PORTS_MAX = 4, /* Maximum ports we allow */ -}; - -/* Parameters we need for USB */ -enum { - PARAM_DIVN, /* PLL FEEDBACK DIVIDer */ - PARAM_DIVM, /* PLL INPUT DIVIDER */ - PARAM_DIVP, /* POST DIVIDER (2^N) */ - PARAM_CPCON, /* BASE PLLC CHARGE Pump setup ctrl */ - PARAM_LFCON, /* BASE PLLC LOOP FILter setup ctrl */ - PARAM_ENABLE_DELAY_COUNT, /* PLL-U Enable Delay Count */ - PARAM_STABLE_COUNT, /* PLL-U STABLE count */ - PARAM_ACTIVE_DELAY_COUNT, /* PLL-U Active delay count */ - PARAM_XTAL_FREQ_COUNT, /* PLL-U XTAL frequency count */ - PARAM_DEBOUNCE_A_TIME, /* 10MS DELAY for BIAS_DEBOUNCE_A */ - PARAM_BIAS_TIME, /* 20US DELAY AFter bias cell op */ - - PARAM_COUNT -}; - -/* Possible port types (dual role mode) */ -enum dr_mode { - DR_MODE_NONE = 0, - DR_MODE_HOST, /* supports host operation */ - DR_MODE_DEVICE, /* supports device operation */ - DR_MODE_OTG, /* supports both */ -}; - -/* Information about a USB port */ -struct fdt_usb { - struct usb_ctlr *reg; /* address of registers in physical memory */ - unsigned utmi:1; /* 1 if port has external tranceiver, else 0 */ - unsigned ulpi:1; /* 1 if port has external ULPI transceiver */ - unsigned enabled:1; /* 1 to enable, 0 to disable */ - unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */ - enum dr_mode dr_mode; /* dual role mode */ - enum periph_id periph_id;/* peripheral id */ - struct fdt_gpio_state vbus_gpio; /* GPIO for vbus enable */ - struct fdt_gpio_state phy_reset_gpio; /* GPIO to reset ULPI phy */ -}; - -static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */ -static unsigned port_count; /* Number of available ports */ - -/* - * This table has USB timing parameters for each Oscillator frequency we - * support. There are four sets of values: - * - * 1. PLLU configuration information (reference clock is osc/clk_m and - * PLLU-FOs are fixed at 12MHz/60MHz/480MHz). - * - * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz - * ---------------------------------------------------------------------- - * DIVN 960 (0x3c0) 200 (0c8) 960 (3c0h) 960 (3c0) - * DIVM 13 (0d) 4 (04) 12 (0c) 26 (1a) - * Filter frequency (MHz) 1 4.8 6 2 - * CPCON 1100b 0011b 1100b 1100b - * LFCON0 0 0 0 0 - * - * 2. PLL CONFIGURATION & PARAMETERS for different clock generators: - * - * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz - * --------------------------------------------------------------------------- - * PLLU_ENABLE_DLY_COUNT 02 (0x02) 03 (03) 02 (02) 04 (04) - * PLLU_STABLE_COUNT 51 (33) 75 (4B) 47 (2F) 102 (66) - * PLL_ACTIVE_DLY_COUNT 05 (05) 06 (06) 04 (04) 09 (09) - * XTAL_FREQ_COUNT 127 (7F) 187 (BB) 118 (76) 254 (FE) - * - * 3. Debounce values IdDig, Avalid, Bvalid, VbusValid, VbusWakeUp, and - * SessEnd. Each of these signals have their own debouncer and for each of - * those one out of two debouncing times can be chosen (BIAS_DEBOUNCE_A or - * BIAS_DEBOUNCE_B). - * - * The values of DEBOUNCE_A and DEBOUNCE_B are calculated as follows: - * 0xffff -> No debouncing at all - * <n> ms = <n> *1000 / (1/19.2MHz) / 4 - * - * So to program a 1 ms debounce for BIAS_DEBOUNCE_A, we have: - * BIAS_DEBOUNCE_A[15:0] = 1000 * 19.2 / 4 = 4800 = 0x12c0 - * - * We need to use only DebounceA for BOOTROM. We don't need the DebounceB - * values, so we can keep those to default. - * - * 4. The 20 microsecond delay after bias cell operation. - */ -static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = { - /* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */ - { 0x3C0, 0x0D, 0x00, 0xC, 0, 0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 }, - { 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 }, - { 0x3C0, 0x0C, 0x00, 0xC, 0, 0x02, 0x2F, 0x04, 0x76, 0x7530, 5 }, - { 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 } -}; - -/* UTMIP Idle Wait Delay */ -static const u8 utmip_idle_wait_delay = 17; - -/* UTMIP Elastic limit */ -static const u8 utmip_elastic_limit = 16; - -/* UTMIP High Speed Sync Start Delay */ -static const u8 utmip_hs_sync_start_delay = 9; - -/* Put the port into host mode */ -static void set_host_mode(struct fdt_usb *config) -{ - /* - * If we are an OTG port, check if remote host is driving VBus and - * bail out in this case. - */ - if (config->dr_mode == DR_MODE_OTG && - (readl(&config->reg->phy_vbus_sensors) & VBUS_VLD_STS)) - return; - - /* - * If not driving, we set the GPIO to enable VBUS. We assume - * that the pinmux is set up correctly for this. - */ - if (fdt_gpio_isvalid(&config->vbus_gpio)) { - fdtdec_setup_gpio(&config->vbus_gpio); - gpio_direction_output(config->vbus_gpio.gpio, - (config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ? - 0 : 1); - debug("set_host_mode: GPIO %d %s\n", config->vbus_gpio.gpio, - (config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ? - "low" : "high"); - } -} - -void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr) -{ - /* Reset the USB controller with 2us delay */ - reset_periph(config->periph_id, 2); - - /* - * Set USB1_NO_LEGACY_MODE to 1, Registers are accessible under - * base address - */ - if (config->has_legacy_mode) - setbits_le32(&usbctlr->usb1_legacy_ctrl, USB1_NO_LEGACY_MODE); - - /* Put UTMIP1/3 in reset */ - setbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET); - - /* Enable the UTMIP PHY */ - if (config->utmi) - setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB); - - /* - * TODO: where do we take the USB1 out of reset? The old code would - * take USB3 out of reset, but not USB1. This code doesn't do either. - */ -} - -/* set up the UTMI USB controller with the parameters provided */ -static int init_utmi_usb_controller(struct fdt_usb *config, - struct usb_ctlr *usbctlr, const u32 timing[]) -{ - u32 val; - int loop_count; - - clock_enable(config->periph_id); - - /* Reset the usb controller */ - usbf_reset_controller(config, usbctlr); - - /* Stop crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN low */ - clrbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN); - - /* Follow the crystal clock disable by >100ns delay */ - udelay(1); - - /* - * To Use the A Session Valid for cable detection logic, VBUS_WAKEUP - * mux must be switched to actually use a_sess_vld threshold. - */ - if (fdt_gpio_isvalid(&config->vbus_gpio)) { - clrsetbits_le32(&usbctlr->usb1_legacy_ctrl, - VBUS_SENSE_CTL_MASK, - VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT); - } - - /* - * PLL Delay CONFIGURATION settings. The following parameters control - * the bring up of the plls. - */ - val = readl(&usbctlr->utmip_misc_cfg1); - clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK, - timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT); - clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK, - timing[PARAM_ACTIVE_DELAY_COUNT] << - UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT); - writel(val, &usbctlr->utmip_misc_cfg1); - - /* Set PLL enable delay count and crystal frequency count */ - val = readl(&usbctlr->utmip_pll_cfg1); - clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK, - timing[PARAM_ENABLE_DELAY_COUNT] << - UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT); - clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK, - timing[PARAM_XTAL_FREQ_COUNT] << - UTMIP_XTAL_FREQ_COUNT_SHIFT); - writel(val, &usbctlr->utmip_pll_cfg1); - - /* Setting the tracking length time */ - clrsetbits_le32(&usbctlr->utmip_bias_cfg1, - UTMIP_BIAS_PDTRK_COUNT_MASK, - timing[PARAM_BIAS_TIME] << UTMIP_BIAS_PDTRK_COUNT_SHIFT); - - /* Program debounce time for VBUS to become valid */ - clrsetbits_le32(&usbctlr->utmip_debounce_cfg0, - UTMIP_DEBOUNCE_CFG0_MASK, - timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT); - - setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J); - - /* Disable battery charge enabling bit */ - setbits_le32(&usbctlr->utmip_bat_chrg_cfg0, UTMIP_PD_CHRG); - - clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_XCVR_LSBIAS_SE); - setbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL); - - /* - * Configure the UTMIP_IDLE_WAIT and UTMIP_ELASTIC_LIMIT - * Setting these fields, together with default values of the - * other fields, results in programming the registers below as - * follows: - * UTMIP_HSRX_CFG0 = 0x9168c000 - * UTMIP_HSRX_CFG1 = 0x13 - */ - - /* Set PLL enable delay count and Crystal frequency count */ - val = readl(&usbctlr->utmip_hsrx_cfg0); - clrsetbits_le32(&val, UTMIP_IDLE_WAIT_MASK, - utmip_idle_wait_delay << UTMIP_IDLE_WAIT_SHIFT); - clrsetbits_le32(&val, UTMIP_ELASTIC_LIMIT_MASK, - utmip_elastic_limit << UTMIP_ELASTIC_LIMIT_SHIFT); - writel(val, &usbctlr->utmip_hsrx_cfg0); - - /* Configure the UTMIP_HS_SYNC_START_DLY */ - clrsetbits_le32(&usbctlr->utmip_hsrx_cfg1, - UTMIP_HS_SYNC_START_DLY_MASK, - utmip_hs_sync_start_delay << UTMIP_HS_SYNC_START_DLY_SHIFT); - - /* Preceed the crystal clock disable by >100ns delay. */ - udelay(1); - - /* Resuscitate crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN */ - setbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN); - - /* Finished the per-controller init. */ - - /* De-assert UTMIP_RESET to bring out of reset. */ - clrbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET); - - /* Wait for the phy clock to become valid in 100 ms */ - for (loop_count = 100000; loop_count != 0; loop_count--) { - if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID) - break; - udelay(1); - } - if (!loop_count) - return -1; - - /* Disable ICUSB FS/LS transceiver */ - clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1); - - /* Select UTMI parallel interface */ - clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, - PTS_UTMI << PTS_SHIFT); - clrbits_le32(&usbctlr->port_sc1, STS); - - /* Deassert power down state */ - clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN | - UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN); - clrbits_le32(&usbctlr->utmip_xcvr_cfg1, UTMIP_FORCE_PDDISC_POWERDOWN | - UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN); - - return 0; -} - -#ifdef CONFIG_USB_ULPI -/* if board file does not set a ULPI reference frequency we default to 24MHz */ -#ifndef CONFIG_ULPI_REF_CLK -#define CONFIG_ULPI_REF_CLK 24000000 -#endif - -/* set up the ULPI USB controller with the parameters provided */ -static int init_ulpi_usb_controller(struct fdt_usb *config, - struct usb_ctlr *usbctlr) -{ - u32 val; - int loop_count; - struct ulpi_viewport ulpi_vp; - - /* set up ULPI reference clock on pllp_out4 */ - clock_enable(PERIPH_ID_DEV2_OUT); - clock_set_pllout(CLOCK_ID_PERIPH, PLL_OUT4, CONFIG_ULPI_REF_CLK); - - /* reset ULPI phy */ - if (fdt_gpio_isvalid(&config->phy_reset_gpio)) { - fdtdec_setup_gpio(&config->phy_reset_gpio); - gpio_direction_output(config->phy_reset_gpio.gpio, 0); - mdelay(5); - gpio_set_value(config->phy_reset_gpio.gpio, 1); - } - - /* Reset the usb controller */ - clock_enable(config->periph_id); - usbf_reset_controller(config, usbctlr); - - /* enable pinmux bypass */ - setbits_le32(&usbctlr->ulpi_timing_ctrl_0, - ULPI_CLKOUT_PINMUX_BYP | ULPI_OUTPUT_PINMUX_BYP); - - /* Select ULPI parallel interface */ - clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, PTS_ULPI << PTS_SHIFT); - - /* enable ULPI transceiver */ - setbits_le32(&usbctlr->susp_ctrl, ULPI_PHY_ENB); - - /* configure ULPI transceiver timings */ - val = 0; - writel(val, &usbctlr->ulpi_timing_ctrl_1); - - val |= ULPI_DATA_TRIMMER_SEL(4); - val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); - val |= ULPI_DIR_TRIMMER_SEL(4); - writel(val, &usbctlr->ulpi_timing_ctrl_1); - udelay(10); - - val |= ULPI_DATA_TRIMMER_LOAD; - val |= ULPI_STPDIRNXT_TRIMMER_LOAD; - val |= ULPI_DIR_TRIMMER_LOAD; - writel(val, &usbctlr->ulpi_timing_ctrl_1); - - /* set up phy for host operation with external vbus supply */ - ulpi_vp.port_num = 0; - ulpi_vp.viewport_addr = (u32)&usbctlr->ulpi_viewport; - - if (ulpi_init(&ulpi_vp)) { - printf("Tegra ULPI viewport init failed\n"); - return -1; - } - - ulpi_set_vbus(&ulpi_vp, 1, 1); - ulpi_set_vbus_indicator(&ulpi_vp, 1, 1, 0); - - /* enable wakeup events */ - setbits_le32(&usbctlr->port_sc1, WKCN | WKDS | WKOC); - - /* Enable and wait for the phy clock to become valid in 100 ms */ - setbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR); - for (loop_count = 100000; loop_count != 0; loop_count--) { - if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID) - break; - udelay(1); - } - if (!loop_count) - return -1; - clrbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR); - - return 0; -} -#else -static int init_ulpi_usb_controller(struct fdt_usb *config, - struct usb_ctlr *usbctlr) -{ - printf("No code to set up ULPI controller, please enable" - "CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT"); - return -1; -} -#endif - -static void config_clock(const u32 timing[]) -{ - clock_start_pll(CLOCK_ID_USB, - timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP], - timing[PARAM_CPCON], timing[PARAM_LFCON]); -} - -/** - * Add a new USB port to the list of available ports. - * - * @param config USB port configuration - * @return 0 if ok, -1 if error (too many ports) - */ -static int add_port(struct fdt_usb *config, const u32 timing[]) -{ - struct usb_ctlr *usbctlr = config->reg; - - if (port_count == USB_PORTS_MAX) { - printf("tegrausb: Cannot register more than %d ports\n", - USB_PORTS_MAX); - return -1; - } - - if (config->utmi && init_utmi_usb_controller(config, usbctlr, timing)) { - printf("tegrausb: Cannot init port\n"); - return -1; - } - - if (config->ulpi && init_ulpi_usb_controller(config, usbctlr)) { - printf("tegrausb: Cannot init port\n"); - return -1; - } - - port[port_count++] = *config; - - return 0; -} - -int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor) -{ - struct usb_ctlr *usbctlr; - - if (portnum >= port_count) - return -1; - set_host_mode(&port[portnum]); - - usbctlr = port[portnum].reg; - *hccr = (u32)&usbctlr->cap_length; - *hcor = (u32)&usbctlr->usb_cmd; - return 0; -} - -int tegrausb_stop_port(int portnum) -{ - struct usb_ctlr *usbctlr; - - usbctlr = port[portnum].reg; - - /* Stop controller */ - writel(0, &usbctlr->usb_cmd); - udelay(1000); - - /* Initiate controller reset */ - writel(2, &usbctlr->usb_cmd); - udelay(1000); - - return 0; -} - -int fdt_decode_usb(const void *blob, int node, unsigned osc_frequency_mhz, - struct fdt_usb *config) -{ - const char *phy, *mode; - - config->reg = (struct usb_ctlr *)fdtdec_get_addr(blob, node, "reg"); - mode = fdt_getprop(blob, node, "dr_mode", NULL); - if (mode) { - if (0 == strcmp(mode, "host")) - config->dr_mode = DR_MODE_HOST; - else if (0 == strcmp(mode, "peripheral")) - config->dr_mode = DR_MODE_DEVICE; - else if (0 == strcmp(mode, "otg")) - config->dr_mode = DR_MODE_OTG; - else { - debug("%s: Cannot decode dr_mode '%s'\n", __func__, - mode); - return -FDT_ERR_NOTFOUND; - } - } else { - config->dr_mode = DR_MODE_HOST; - } - - phy = fdt_getprop(blob, node, "phy_type", NULL); - config->utmi = phy && 0 == strcmp("utmi", phy); - config->ulpi = phy && 0 == strcmp("ulpi", phy); - config->enabled = fdtdec_get_is_enabled(blob, node); - config->has_legacy_mode = fdtdec_get_bool(blob, node, - "nvidia,has-legacy-mode"); - config->periph_id = clock_decode_periph_id(blob, node); - if (config->periph_id == PERIPH_ID_NONE) { - debug("%s: Missing/invalid peripheral ID\n", __func__); - return -FDT_ERR_NOTFOUND; - } - fdtdec_decode_gpio(blob, node, "nvidia,vbus-gpio", &config->vbus_gpio); - fdtdec_decode_gpio(blob, node, "nvidia,phy-reset-gpio", - &config->phy_reset_gpio); - debug("enabled=%d, legacy_mode=%d, utmi=%d, ulpi=%d, periph_id=%d, " - "vbus=%d, phy_reset=%d, dr_mode=%d\n", - config->enabled, config->has_legacy_mode, config->utmi, - config->ulpi, config->periph_id, config->vbus_gpio.gpio, - config->phy_reset_gpio.gpio, config->dr_mode); - - return 0; -} - -int board_usb_init(const void *blob) -{ - struct fdt_usb config; - unsigned osc_freq = clock_get_rate(CLOCK_ID_OSC); - enum clock_osc_freq freq; - int node_list[USB_PORTS_MAX]; - int node, count, i; - - /* Set up the USB clocks correctly based on our oscillator frequency */ - freq = clock_get_osc_freq(); - config_clock(usb_pll[freq]); - - /* count may return <0 on error */ - count = fdtdec_find_aliases_for_id(blob, "usb", - COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX); - for (i = 0; i < count; i++) { - debug("USB %d: ", i); - node = node_list[i]; - if (!node) - continue; - if (fdt_decode_usb(blob, node, osc_freq, &config)) { - debug("Cannot decode USB node %s\n", - fdt_get_name(blob, node, NULL)); - return -1; - } - - if (add_port(&config, usb_pll[freq])) - return -1; - set_host_mode(&config); - } - - return 0; -} diff --git a/arch/arm/cpu/armv7/zynq/Makefile b/arch/arm/cpu/armv7/zynq/Makefile index 499ace4a62..388085dc2a 100644 --- a/arch/arm/cpu/armv7/zynq/Makefile +++ b/arch/arm/cpu/armv7/zynq/Makefile @@ -30,6 +30,7 @@ LIB = $(obj)lib$(SOC).o COBJS-y := timer.o COBJS-y += cpu.o +COBJS-y += slcr.o COBJS := $(COBJS-y) diff --git a/arch/arm/cpu/armv7/zynq/cpu.c b/arch/arm/cpu/armv7/zynq/cpu.c index ab615cc7d4..e8f4c19d49 100644 --- a/arch/arm/cpu/armv7/zynq/cpu.c +++ b/arch/arm/cpu/armv7/zynq/cpu.c @@ -21,11 +21,37 @@ * MA 02111-1307 USA */ #include <common.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> -inline void lowlevel_init(void) {} +void lowlevel_init(void) +{ + zynq_slcr_unlock(); + /* remap DDR to zero, FILTERSTART */ + writel(0, &scu_base->filter_start); + + /* Device config APB, unlock the PCAP */ + writel(0x757BDF0D, &devcfg_base->unlock); + writel(0xFFFFFFFF, &devcfg_base->rom_shadow); + + /* OCM_CFG, Mask out the ROM, map ram into upper addresses */ + writel(0x1F, &slcr_base->ocm_cfg); + /* FPGA_RST_CTRL, clear resets on AXI fabric ports */ + writel(0x0, &slcr_base->fpga_rst_ctrl); + /* TZ_DDR_RAM, Set DDR trust zone non-secure */ + writel(0xFFFFFFFF, &slcr_base->trust_zone); + /* Set urgent bits with register */ + writel(0x0, &slcr_base->ddr_urgent_sel); + /* Urgent write, ports S2/S3 */ + writel(0xC, &slcr_base->ddr_urgent); + + zynq_slcr_lock(); +} void reset_cpu(ulong addr) { + zynq_slcr_cpu_reset(); while (1) ; } diff --git a/arch/arm/cpu/armv7/zynq/slcr.c b/arch/arm/cpu/armv7/zynq/slcr.c new file mode 100644 index 0000000000..788a8fd14f --- /dev/null +++ b/arch/arm/cpu/armv7/zynq/slcr.c @@ -0,0 +1,63 @@ +/* + * Copyright (c) 2013 Xilinx Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <malloc.h> +#include <asm/arch/hardware.h> + +#define SLCR_LOCK_MAGIC 0x767B +#define SLCR_UNLOCK_MAGIC 0xDF0D + +static int slcr_lock = 1; /* 1 means locked, 0 means unlocked */ + +void zynq_slcr_lock(void) +{ + if (!slcr_lock) + writel(SLCR_LOCK_MAGIC, &slcr_base->slcr_lock); +} + +void zynq_slcr_unlock(void) +{ + if (slcr_lock) + writel(SLCR_UNLOCK_MAGIC, &slcr_base->slcr_unlock); +} + +/* Reset the entire system */ +void zynq_slcr_cpu_reset(void) +{ + /* + * Unlock the SLCR then reset the system. + * Note that this seems to require raw i/o + * functions or there's a lockup? + */ + zynq_slcr_unlock(); + + /* + * Clear 0x0F000000 bits of reboot status register to workaround + * the FSBL not loading the bitstream after soft-reboot + * This is a temporary solution until we know more. + */ + clrbits_le32(&slcr_base->reboot_status, 0xF000000); + + writel(1, &slcr_base->pss_rst_ctrl); +} diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S index efb5a400cf..b7259645e5 100644 --- a/arch/arm/cpu/ixp/start.S +++ b/arch/arm/cpu/ixp/start.S @@ -112,7 +112,7 @@ _bss_start_ofs: .globl _bss_end_ofs _bss_end_ofs: - .word __bss_end__ - _start + .word __bss_end - _start .globl _end_ofs _end_ofs: diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds index 81d954f2de..8345b55032 100644 --- a/arch/arm/cpu/ixp/u-boot.lds +++ b/arch/arm/cpu/ixp/u-boot.lds @@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); @@ -67,11 +67,17 @@ SECTIONS _end = .; - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; + } + .bss_end __bss_end (OVERLAY) : { + KEEP(*(__bss_end)); } /DISCARD/ : { *(.dynstr*) } diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S index e71803eb2e..456a7836da 100644 --- a/arch/arm/cpu/pxa/start.S +++ b/arch/arm/cpu/pxa/start.S @@ -120,7 +120,7 @@ _bss_start_ofs: .globl _bss_end_ofs _bss_end_ofs: - .word __bss_end__ - _start + .word __bss_end - _start .globl _end_ofs _end_ofs: diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S index 4528c91983..c096177086 100644 --- a/arch/arm/cpu/s3c44b0/start.S +++ b/arch/arm/cpu/s3c44b0/start.S @@ -78,7 +78,7 @@ _bss_start_ofs: .globl _bss_end_ofs _bss_end_ofs: - .word __bss_end__ - _start + .word __bss_end - _start .globl _end_ofs _end_ofs: diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index 3144299afe..4bf6f5fe97 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -88,7 +88,7 @@ _bss_start_ofs: .globl _bss_end_ofs _bss_end_ofs: - .word __bss_end__ - _start + .word __bss_end - _start .globl _end_ofs _end_ofs: diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/cpu/tegra114-common/pinmux.c index 52b3ec47aa..4983a05090 100644 --- a/arch/arm/cpu/tegra114-common/pinmux.c +++ b/arch/arm/cpu/tegra114-common/pinmux.c @@ -37,6 +37,20 @@ struct tegra_pingroup_desc { #define PMUX_OD_SHIFT 6 #define PMUX_LOCK_SHIFT 7 #define PMUX_IO_RESET_SHIFT 8 +#define PMUX_RCV_SEL_SHIFT 9 + +#define PGRP_HSM_SHIFT 2 +#define PGRP_SCHMT_SHIFT 3 +#define PGRP_LPMD_SHIFT 4 +#define PGRP_LPMD_MASK (3 << PGRP_LPMD_SHIFT) +#define PGRP_DRVDN_SHIFT 12 +#define PGRP_DRVDN_MASK (0x7F << PGRP_DRVDN_SHIFT) +#define PGRP_DRVUP_SHIFT 20 +#define PGRP_DRVUP_MASK (0x7F << PGRP_DRVUP_SHIFT) +#define PGRP_SLWR_SHIFT 28 +#define PGRP_SLWR_MASK (3 << PGRP_SLWR_SHIFT) +#define PGRP_SLWF_SHIFT 30 +#define PGRP_SLWF_MASK (3 << PGRP_SLWF_SHIFT) /* Convenient macro for defining pin group properties */ #define PIN(pg_name, vdd, f0, f1, f2, f3, iod) \ @@ -58,6 +72,10 @@ struct tegra_pingroup_desc { #define PINO(pg_name, vdd, f0, f1, f2, f3) \ PIN(pg_name, vdd, f0, f1, f2, f3, OUTPUT) +/* A pin group number which is not used */ +#define PIN_RESERVED \ + PIN(NONE, NONE, INVALID, INVALID, INVALID, INVALID, NONE) + const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = { /* NAME VDD f0 f1 f2 f3 */ PINI(ULPI_DATA0, BB, SPI3, HSI, UARTA, ULPI), @@ -84,71 +102,71 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = { PINI(SDMMC1_DAT2, SDMMC1, SDMMC1, PWM0, SPI4, UARTA), PINI(SDMMC1_DAT1, SDMMC1, SDMMC1, PWM1, SPI4, UARTA), PINI(SDMMC1_DAT0, SDMMC1, SDMMC1, RSVD2, SPI4, UARTA), - PINI(GPIO_PV2, BB, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(GPIO_PV3, BB, RSVD1, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x3060 - 0x3064 */ + PIN_RESERVED, PINI(CLK2_OUT, SDMMC1, EXTPERIPH2, RSVD2, RSVD3, RSVD4), PINI(CLK2_REQ, SDMMC1, DAP, RSVD2, RSVD3, RSVD4), - PINO(LCD_PWR1, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_PWR2, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_SDIN, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_SDOUT, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_WR_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_CS0_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_DC0, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_SCK, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_PWR0, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_PCLK, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_DE, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_HSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_VSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D0, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D1, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D2, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D3, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D4, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D5, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D6, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D7, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D8, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D9, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D10, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D11, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D12, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D13, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D14, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D15, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D16, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D17, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D18, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D19, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D20, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D21, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D22, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_D23, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_CS1_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_M1, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINO(LCD_DC1, LCD, RSVD1, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x3070 - 0x310c */ + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, PINI(HDMI_INT, LCD, RSVD1, RSVD2, RSVD3, RSVD4), PINI(DDC_SCL, LCD, I2C4, RSVD2, RSVD3, RSVD4), PINI(DDC_SDA, LCD, I2C4, RSVD2, RSVD3, RSVD4), - PINI(CRT_HSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(CRT_VSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D0, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D1, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D2, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D3, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D4, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D5, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D6, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D7, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D8, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D9, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D10, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_D11, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_PCLK, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_MCLK, VI, RSVD1, RSVD3, RSVD3, RSVD4), - PINI(VI_VSYNC, VI, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(VI_HSYNC, VI, RSVD1, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x311c - 0x3160 */ + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, PINI(UART2_RXD, UART, UARTB, SPDIF, UARTA, SPI4), PINI(UART2_TXD, UART, UARTB, SPDIF, UARTA, SPI4), PINI(UART2_RTS_N, UART, UARTA, UARTB, RSVD3, SPI4), @@ -220,8 +238,8 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = { PINI(SDMMC4_DAT5, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), PINI(SDMMC4_DAT6, SDMMC4, SDMMC4, SPI3, GMI, RSVD4), PINI(SDMMC4_DAT7, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4), - PINI(SDMMC4_RST_N, SDMMC4, RSVD1, RSVD2, RSVD3, SDMMC4), - PINI(CAM_MCLK, CAM, VI, VI_ALT1, VI_ALT2, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x3280 */ + PINI(CAM_MCLK, CAM, VI, VI_ALT1, VI_ALT3, RSVD4), PINI(GPIO_PCC1, CAM, I2S4, RSVD2, RSVD3, RSVD4), PINI(GPIO_PBB0, CAM, I2S4, VI, VI_ALT1, VI_ALT3), PINI(CAM_I2C_SCL, CAM, VGP1, I2C3, RSVD3, RSVD4), @@ -246,11 +264,11 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = { PINI(KB_ROW8, SYS, KBC, RSVD2, RSVD3, UARTA), PINI(KB_ROW9, SYS, KBC, RSVD2, RSVD3, UARTA), PINI(KB_ROW10, SYS, KBC, RSVD2, RSVD3, UARTA), - PINI(KB_ROW11, SYS, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(KB_ROW12, SYS, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(KB_ROW13, SYS, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(KB_ROW14, SYS, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(KB_ROW15, SYS, RSVD1, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x32e8 - 0x32f8 */ + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, PINI(KB_COL0, SYS, KBC, USB, SPI2, EMC_DLL), PINI(KB_COL1, SYS, KBC, RSVD2, SPI2, EMC_DLL), PINI(KB_COL2, SYS, KBC, RSVD2, SPI2, RSVD4), @@ -278,36 +296,46 @@ const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = { PINI(DAP2_DIN, AUDIO, I2S1, HDA, RSVD3, RSVD4), PINI(DAP2_DOUT, AUDIO, I2S1, HDA, RSVD3, RSVD4), PINI(DAP2_SCLK, AUDIO, I2S1, HDA, RSVD3, RSVD4), - PINI(SPI2_MOSI, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4), - PINI(SPI2_MISO, AUDIO, SPI6, RSVD2, RSVD3, RSVD4), - PINI(SPI2_CS0_N, AUDIO, SPI6, SPI1, RSVD3, RSVD4), - PINI(SPI2_SCK, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4), - PINI(SPI1_MOSI, AUDIO, RSVD1, SPI1, SPI2, DAP2), - PINI(SPI1_SCK, AUDIO, RSVD1, SPI1, SPI2, RSVD4), - PINI(SPI1_CS0_N, AUDIO, SPI6, SPI1, SPI2, RSVD4), - PINI(SPI1_MISO, AUDIO, RSVD1, SPI1, SPI2, RSVD4), - PINI(SPI2_CS1_N, AUDIO, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(SPI2_CS2_N, AUDIO, RSVD1, RSVD2, RSVD3, RSVD4), + PINI(DVFS_PWM, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4), + PINI(GPIO_X1_AUD, AUDIO, SPI6, RSVD2, RSVD3, RSVD4), + PINI(GPIO_X3_AUD, AUDIO, SPI6, SPI1, RSVD3, RSVD4), + PINI(DVFS_CLK, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4), + PINI(GPIO_X4_AUD, AUDIO, RSVD1, SPI1, SPI2, DAP2), + PINI(GPIO_X5_AUD, AUDIO, RSVD1, SPI1, SPI2, RSVD4), + PINI(GPIO_X6_AUD, AUDIO, SPI6, SPI1, SPI2, RSVD4), + PINI(GPIO_X7_AUD, AUDIO, RSVD1, SPI1, SPI2, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x3388 - 0x338c */ + PIN_RESERVED, PINI(SDMMC3_CLK, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3), PINI(SDMMC3_CMD, SDMMC3, SDMMC3, PWM3, UARTA, SPI3), PINI(SDMMC3_DAT0, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3), PINI(SDMMC3_DAT1, SDMMC3, SDMMC3, PWM2, UARTA, SPI3), PINI(SDMMC3_DAT2, SDMMC3, SDMMC3, PWM1, DISPA, SPI3), PINI(SDMMC3_DAT3, SDMMC3, SDMMC3, PWM0, DISPB, SPI3), - PINI(SDMMC3_DAT4, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(SDMMC3_DAT5, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(SDMMC3_DAT6, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4), - PINI(SDMMC3_DAT7, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x33a8 - 0x33dc */ + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, + PIN_RESERVED, PINI(HDMI_CEC, SYS, CEC, SDMMC3, RSVD3, SOC), PINI(SDMMC1_WP_N, SDMMC1, SDMMC1, CLK12, SPI4, UARTA), - PINI(SDMMC3_CD_N, SDMMC3, SDMMC3, OWR, RSVD3, RSVD4), - PINI(SPI1_CS1_N, AUDIO, SPI6, RSVD2, SPI2, I2C1), - PINI(SPI1_CS2_N, AUDIO, SPI6, SPI1, SPI2, I2C1), - PINI(USB_VBUS_EN0, SYS, USB, RSVD2, RSVD3, RSVD4), - PINI(USB_VBUS_EN1, SYS, USB, RSVD2, RSVD3, RSVD4), + PINI(SDMMC3_CD_N, SYS, SDMMC3, OWR, RSVD3, RSVD4), + PINI(GPIO_W2_AUD, AUDIO, SPI6, RSVD2, SPI2, I2C1), + PINI(GPIO_W3_AUD, AUDIO, SPI6, SPI1, SPI2, I2C1), + PINI(USB_VBUS_EN0, LCD, USB, RSVD2, RSVD3, RSVD4), + PINI(USB_VBUS_EN1, LCD, USB, RSVD2, RSVD3, RSVD4), PINI(SDMMC3_CLK_LB_IN, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4), - PINO(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4), - PINO(NAND_GMI_CLK_LB, GMI, SDMMC2, NAND, GMI, RSVD4), + PINI(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4), + PIN_RESERVED, /* Reserved by t114: 0x3404 */ PINO(RESET_OUT_N, SYS, RSVD1, RSVD2, RSVD3, RESET_OUT_N), }; @@ -484,6 +512,30 @@ static int pinmux_set_ioreset(enum pmux_pingrp pin, return 0; } +static int pinmux_set_rcv_sel(enum pmux_pingrp pin, + enum pmux_pin_rcv_sel rcv_sel) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pin_rcv_sel = &pmt->pmt_ctl[pin]; + u32 reg; + + /* Error check on pin and rcv_sel */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_pin_rcv_sel_isvalid(rcv_sel)); + + if (rcv_sel == PMUX_PIN_RCV_SEL_DEFAULT) + return 0; + + reg = readl(pin_rcv_sel); + reg &= ~(0x1 << PMUX_RCV_SEL_SHIFT); + if (rcv_sel == PMUX_PIN_RCV_SEL_HIGH) + reg |= (0x1 << PMUX_RCV_SEL_SHIFT); + writel(reg, pin_rcv_sel); + + return 0; +} + void pinmux_config_pingroup(struct pingroup_config *config) { enum pmux_pingrp pin = config->pingroup; @@ -495,6 +547,7 @@ void pinmux_config_pingroup(struct pingroup_config *config) pinmux_set_lock(pin, config->lock); pinmux_set_od(pin, config->od); pinmux_set_ioreset(pin, config->ioreset); + pinmux_set_rcv_sel(pin, config->rcv_sel); } void pinmux_config_table(struct pingroup_config *config, int len) @@ -504,3 +557,184 @@ void pinmux_config_table(struct pingroup_config *config, int len) for (i = 0; i < len; i++) pinmux_config_pingroup(&config[i]); } + +static int padgrp_set_drvup_slwf(enum pdrive_pingrp pad, int slwf) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_slwf = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and slwf */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_slw_isvalid(slwf)); + + /* NONE means unspecified/do not change/use POR value */ + if (slwf == PGRP_SLWF_NONE) + return 0; + + reg = readl(pad_slwf); + reg &= ~PGRP_SLWF_MASK; + reg |= (slwf << PGRP_SLWF_SHIFT); + writel(reg, pad_slwf); + + return 0; +} + +static int padgrp_set_drvdn_slwr(enum pdrive_pingrp pad, int slwr) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_slwr = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and slwr */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_slw_isvalid(slwr)); + + /* NONE means unspecified/do not change/use POR value */ + if (slwr == PGRP_SLWR_NONE) + return 0; + + reg = readl(pad_slwr); + reg &= ~PGRP_SLWR_MASK; + reg |= (slwr << PGRP_SLWR_SHIFT); + writel(reg, pad_slwr); + + return 0; +} + +static int padgrp_set_drvup(enum pdrive_pingrp pad, int drvup) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_drvup = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and drvup */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_drv_isvalid(drvup)); + + /* NONE means unspecified/do not change/use POR value */ + if (drvup == PGRP_DRVUP_NONE) + return 0; + + reg = readl(pad_drvup); + reg &= ~PGRP_DRVUP_MASK; + reg |= (drvup << PGRP_DRVUP_SHIFT); + writel(reg, pad_drvup); + + return 0; +} + +static int padgrp_set_drvdn(enum pdrive_pingrp pad, int drvdn) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_drvdn = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and drvdn */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_drv_isvalid(drvdn)); + + /* NONE means unspecified/do not change/use POR value */ + if (drvdn == PGRP_DRVDN_NONE) + return 0; + + reg = readl(pad_drvdn); + reg &= ~PGRP_DRVDN_MASK; + reg |= (drvdn << PGRP_DRVDN_SHIFT); + writel(reg, pad_drvdn); + + return 0; +} + +static int padgrp_set_lpmd(enum pdrive_pingrp pad, enum pgrp_lpmd lpmd) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_lpmd = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad and lpmd value */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_lpmd_isvalid(lpmd)); + + /* NONE means unspecified/do not change/use POR value */ + if (lpmd == PGRP_LPMD_NONE) + return 0; + + reg = readl(pad_lpmd); + reg &= ~PGRP_LPMD_MASK; + reg |= (lpmd << PGRP_LPMD_SHIFT); + writel(reg, pad_lpmd); + + return 0; +} + +static int padgrp_set_schmt(enum pdrive_pingrp pad, enum pgrp_schmt schmt) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_schmt = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad */ + assert(pmux_padgrp_isvalid(pad)); + + /* NONE means unspecified/do not change/use POR value */ + if (schmt == PGRP_SCHMT_NONE) + return 0; + + reg = readl(pad_schmt); + reg &= ~(1 << PGRP_SCHMT_SHIFT); + if (schmt == PGRP_SCHMT_ENABLE) + reg |= (0x1 << PGRP_SCHMT_SHIFT); + writel(reg, pad_schmt); + + return 0; +} +static int padgrp_set_hsm(enum pdrive_pingrp pad, enum pgrp_hsm hsm) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_hsm = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad */ + assert(pmux_padgrp_isvalid(pad)); + + /* NONE means unspecified/do not change/use POR value */ + if (hsm == PGRP_HSM_NONE) + return 0; + + reg = readl(pad_hsm); + reg &= ~(1 << PGRP_HSM_SHIFT); + if (hsm == PGRP_HSM_ENABLE) + reg |= (0x1 << PGRP_HSM_SHIFT); + writel(reg, pad_hsm); + + return 0; +} + +void padctrl_config_pingroup(struct padctrl_config *config) +{ + enum pdrive_pingrp pad = config->padgrp; + + padgrp_set_drvup_slwf(pad, config->slwf); + padgrp_set_drvdn_slwr(pad, config->slwr); + padgrp_set_drvup(pad, config->drvup); + padgrp_set_drvdn(pad, config->drvdn); + padgrp_set_lpmd(pad, config->lpmd); + padgrp_set_schmt(pad, config->schmt); + padgrp_set_hsm(pad, config->hsm); +} + +void padgrp_config_table(struct padctrl_config *config, int len) +{ + int i; + + for (i = 0; i < len; i++) + padctrl_config_pingroup(&config[i]); +} diff --git a/arch/arm/cpu/tegra30-common/pinmux.c b/arch/arm/cpu/tegra30-common/pinmux.c index 122665fd3c..eecf0580bc 100644 --- a/arch/arm/cpu/tegra30-common/pinmux.c +++ b/arch/arm/cpu/tegra30-common/pinmux.c @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -38,6 +38,19 @@ struct tegra_pingroup_desc { #define PMUX_LOCK_SHIFT 7 #define PMUX_IO_RESET_SHIFT 8 +#define PGRP_HSM_SHIFT 2 +#define PGRP_SCHMT_SHIFT 3 +#define PGRP_LPMD_SHIFT 4 +#define PGRP_LPMD_MASK (3 << PGRP_LPMD_SHIFT) +#define PGRP_DRVDN_SHIFT 12 +#define PGRP_DRVDN_MASK (0x7F << PGRP_DRVDN_SHIFT) +#define PGRP_DRVUP_SHIFT 20 +#define PGRP_DRVUP_MASK (0x7F << PGRP_DRVUP_SHIFT) +#define PGRP_SLWR_SHIFT 28 +#define PGRP_SLWR_MASK (3 << PGRP_SLWR_SHIFT) +#define PGRP_SLWF_SHIFT 30 +#define PGRP_SLWF_MASK (3 << PGRP_SLWF_SHIFT) + /* Convenient macro for defining pin group properties */ #define PIN(pg_name, vdd, f0, f1, f2, f3, iod) \ { \ @@ -504,3 +517,178 @@ void pinmux_config_table(struct pingroup_config *config, int len) for (i = 0; i < len; i++) pinmux_config_pingroup(&config[i]); } + +static int padgrp_set_drvup_slwf(enum pdrive_pingrp pad, + int slwf) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_slwf = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and slwf */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_slw_isvalid(slwf)); + + /* NONE means unspecified/do not change/use POR value */ + if (slwf == PGRP_SLWF_NONE) + return 0; + + reg = readl(pad_slwf); + reg &= ~PGRP_SLWF_MASK; + reg |= (slwf << PGRP_SLWF_SHIFT); + writel(reg, pad_slwf); + + return 0; +} + +static int padgrp_set_drvdn_slwr(enum pdrive_pingrp pad, int slwr) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_slwr = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and slwr */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_slw_isvalid(slwr)); + + /* NONE means unspecified/do not change/use POR value */ + if (slwr == PGRP_SLWR_NONE) + return 0; + + reg = readl(pad_slwr); + reg &= ~PGRP_SLWR_MASK; + reg |= (slwr << PGRP_SLWR_SHIFT); + writel(reg, pad_slwr); + + return 0; +} + +static int padgrp_set_drvup(enum pdrive_pingrp pad, int drvup) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_drvup = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and drvup */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_drv_isvalid(drvup)); + + /* NONE means unspecified/do not change/use POR value */ + if (drvup == PGRP_DRVUP_NONE) + return 0; + + reg = readl(pad_drvup); + reg &= ~PGRP_DRVUP_MASK; + reg |= (drvup << PGRP_DRVUP_SHIFT); + writel(reg, pad_drvup); + + return 0; +} + +static int padgrp_set_drvdn(enum pdrive_pingrp pad, int drvdn) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_drvdn = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check on pad and drvdn */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_drv_isvalid(drvdn)); + + /* NONE means unspecified/do not change/use POR value */ + if (drvdn == PGRP_DRVDN_NONE) + return 0; + + reg = readl(pad_drvdn); + reg &= ~PGRP_DRVDN_MASK; + reg |= (drvdn << PGRP_DRVDN_SHIFT); + writel(reg, pad_drvdn); + + return 0; +} + +static int padgrp_set_lpmd(enum pdrive_pingrp pad, enum pgrp_lpmd lpmd) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_lpmd = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad and lpmd value */ + assert(pmux_padgrp_isvalid(pad)); + assert(pmux_pad_lpmd_isvalid(lpmd)); + + /* NONE means unspecified/do not change/use POR value */ + if (lpmd == PGRP_LPMD_NONE) + return 0; + + reg = readl(pad_lpmd); + reg &= ~PGRP_LPMD_MASK; + reg |= (lpmd << PGRP_LPMD_SHIFT); + writel(reg, pad_lpmd); + + return 0; +} + +static int padgrp_set_schmt(enum pdrive_pingrp pad, enum pgrp_schmt schmt) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_schmt = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad */ + assert(pmux_padgrp_isvalid(pad)); + + reg = readl(pad_schmt); + reg &= ~(1 << PGRP_SCHMT_SHIFT); + if (schmt == PGRP_SCHMT_ENABLE) + reg |= (0x1 << PGRP_SCHMT_SHIFT); + writel(reg, pad_schmt); + + return 0; +} +static int padgrp_set_hsm(enum pdrive_pingrp pad, + enum pgrp_hsm hsm) +{ + struct pmux_tri_ctlr *pmt = + (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + u32 *pad_hsm = &pmt->pmt_drive[pad]; + u32 reg; + + /* Error check pad */ + assert(pmux_padgrp_isvalid(pad)); + + reg = readl(pad_hsm); + reg &= ~(1 << PGRP_HSM_SHIFT); + if (hsm == PGRP_HSM_ENABLE) + reg |= (0x1 << PGRP_HSM_SHIFT); + writel(reg, pad_hsm); + + return 0; +} + +void padctrl_config_pingroup(struct padctrl_config *config) +{ + enum pdrive_pingrp pad = config->padgrp; + + padgrp_set_drvup_slwf(pad, config->slwf); + padgrp_set_drvdn_slwr(pad, config->slwr); + padgrp_set_drvup(pad, config->drvup); + padgrp_set_drvdn(pad, config->drvdn); + padgrp_set_lpmd(pad, config->lpmd); + padgrp_set_schmt(pad, config->schmt); + padgrp_set_hsm(pad, config->hsm); +} + +void padgrp_config_table(struct padctrl_config *config, int len) +{ + int i; + + for (i = 0; i < len; i++) + padctrl_config_pingroup(&config[i]); +} diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds new file mode 100644 index 0000000000..3c0d99ca36 --- /dev/null +++ b/arch/arm/cpu/u-boot-spl.lds @@ -0,0 +1,93 @@ +/* + * Copyright (c) 2004-2008 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + __image_copy_start = .; + CPUDIR/start.o (.text*) + *(.text*) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { + *(.data*) + } + + . = ALIGN(4); + + . = .; + + __image_copy_end = .; + + .rel.dyn : { + __rel_dyn_start = .; + *(.rel*) + __rel_dyn_end = .; + } + + .dynsym : { + __dynsym_start = .; + *(.dynsym) + } + + _end = .; + + /* + * Deprecated: this MMU section is used by pxa at present but + * should not be used by new boards/CPUs. + */ + . = ALIGN(4096); + .mmutable : { + *(.mmutable) + } + + .bss __rel_dyn_start (OVERLAY) : { + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } + + /DISCARD/ : { *(.dynstr*) } + /DISCARD/ : { *(.dynamic*) } + /DISCARD/ : { *(.plt*) } + /DISCARD/ : { *(.interp*) } + /DISCARD/ : { *(.gnu*) } +} + +#if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE) +ASSERT(__bss_end < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big"); +#endif diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index e6b202bd14..3a1083d9a9 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -52,7 +52,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); @@ -81,11 +81,18 @@ SECTIONS *(.mmutable) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; + } + + .bss_end __bss_end (OVERLAY) : { + KEEP(*(__bss_end)); } /DISCARD/ : { *(.dynstr*) } @@ -96,5 +103,5 @@ SECTIONS } #if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE) -ASSERT(__bss_end__ < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big"); +ASSERT(__bss_end < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big"); #endif diff --git a/arch/arm/dts/tegra114.dtsi b/arch/arm/dts/tegra114.dtsi index d06cd126dd..701c0f9aff 100644 --- a/arch/arm/dts/tegra114.dtsi +++ b/arch/arm/dts/tegra114.dtsi @@ -1,5 +1,78 @@ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "nvidia,tegra114"; + + tegra_car: clock { + compatible = "nvidia,tegra114-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + }; + + gpio: gpio { + compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio"; + reg = <0x6000d000 0x1000>; + interrupts = <0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04 + 0 125 0x04>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; + }; + + i2c@7000c000 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 12>; + status = "disabled"; + }; + + i2c@7000c400 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <0 84 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 54>; + status = "disabled"; + }; + + i2c@7000c500 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <0 92 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 67>; + status = "disabled"; + }; + + i2c@7000c700 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000c700 0x100>; + interrupts = <0 120 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 103>; + status = "disabled"; + }; + + i2c@7000d000 { + compatible = "nvidia,tegra114-i2c"; + reg = <0x7000d000 0x100>; + interrupts = <0 53 0x04>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car 47>; + status = "disabled"; + }; }; diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi index 9a8968522e..3805750581 100644 --- a/arch/arm/dts/tegra20.dtsi +++ b/arch/arm/dts/tegra20.dtsi @@ -1,4 +1,4 @@ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "nvidia,tegra20"; @@ -318,24 +318,32 @@ sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; - interrupts = < 46 >; + interrupts = <0 14 0x04>; + clocks = <&tegra_car 14>; + status = "disabled"; }; sdhci@c8000200 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000200 0x200>; - interrupts = < 47 >; + interrupts = <0 15 0x04>; + clocks = <&tegra_car 9>; + status = "disabled"; }; sdhci@c8000400 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000400 0x200>; - interrupts = < 51 >; + interrupts = <0 19 0x04>; + clocks = <&tegra_car 69>; + status = "disabled"; }; sdhci@c8000600 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000600 0x200>; - interrupts = < 63 >; + interrupts = <0 31 0x04>; + clocks = <&tegra_car 15>; + status = "disabled"; }; }; diff --git a/arch/arm/dts/tegra30.dtsi b/arch/arm/dts/tegra30.dtsi index 7b8126f7cc..ccf154f1e7 100644 --- a/arch/arm/dts/tegra30.dtsi +++ b/arch/arm/dts/tegra30.dtsi @@ -1,10 +1,10 @@ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { compatible = "nvidia,tegra30"; - tegra_car: clock@60006000 { - compatible = "nvidia,tegra30-car", "nvidia,tegra20-car"; + tegra_car: clock { + compatible = "nvidia,tegra30-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; }; @@ -44,51 +44,79 @@ 0 141 0x04 0 142 0x04 0 143 0x04>; + clocks = <&tegra_car 34>; + }; + + gpio: gpio { + compatible = "nvidia,tegra30-gpio"; + reg = <0x6000d000 0x1000>; + interrupts = <0 32 0x04 + 0 33 0x04 + 0 34 0x04 + 0 35 0x04 + 0 55 0x04 + 0 87 0x04 + 0 89 0x04 + 0 125 0x04>; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; }; i2c@7000c000 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000C000 0x100>; - /* PERIPH_ID_I2C1, CLK_M */ - clocks = <&tegra_car 12>; + clocks = <&tegra_car 12>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; + status = "disabled"; }; i2c@7000c400 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <0 84 0x04>; #address-cells = <1>; #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000C400 0x100>; - /* PERIPH_ID_I2C2, CLK_M */ - clocks = <&tegra_car 54>; + clocks = <&tegra_car 54>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; + status = "disabled"; }; i2c@7000c500 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000C500 0x100>; - /* PERIPH_ID_I2C3, CLK_M */ - clocks = <&tegra_car 67>; + clocks = <&tegra_car 67>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; + status = "disabled"; }; i2c@7000c700 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000c700 0x100>; + interrupts = <0 120 0x04>; #address-cells = <1>; #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000C700 0x100>; - /* PERIPH_ID_I2C4, CLK_M */ - clocks = <&tegra_car 103>; + clocks = <&tegra_car 103>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; + status = "disabled"; }; i2c@7000d000 { + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + reg = <0x7000d000 0x100>; + interrupts = <0 53 0x04>; #address-cells = <1>; #size-cells = <0>; - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; - reg = <0x7000D000 0x100>; - /* PERIPH_ID_I2C_DVC, CLK_M */ - clocks = <&tegra_car 47>; + clocks = <&tegra_car 47>, <&tegra_car 182>; + clock-names = "div-clk", "fast-clk"; + status = "disabled"; }; spi@7000d400 { @@ -98,9 +126,8 @@ nvidia,dma-request-selector = <&apbdma 15>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; - /* PERIPH_ID_SBC1, PLLP_OUT0 */ clocks = <&tegra_car 41>; + status = "disabled"; }; spi@7000d600 { @@ -110,9 +137,8 @@ nvidia,dma-request-selector = <&apbdma 16>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; - /* PERIPH_ID_SBC2, PLLP_OUT0 */ clocks = <&tegra_car 44>; + status = "disabled"; }; spi@7000d800 { @@ -122,9 +148,8 @@ nvidia,dma-request-selector = <&apbdma 17>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; - /* PERIPH_ID_SBC3, PLLP_OUT0 */ clocks = <&tegra_car 46>; + status = "disabled"; }; spi@7000da00 { @@ -134,9 +159,8 @@ nvidia,dma-request-selector = <&apbdma 18>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; - /* PERIPH_ID_SBC4, PLLP_OUT0 */ clocks = <&tegra_car 68>; + status = "disabled"; }; spi@7000dc00 { @@ -146,9 +170,8 @@ nvidia,dma-request-selector = <&apbdma 27>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; - /* PERIPH_ID_SBC5, PLLP_OUT0 */ clocks = <&tegra_car 104>; + status = "disabled"; }; spi@7000de00 { @@ -158,8 +181,39 @@ nvidia,dma-request-selector = <&apbdma 28>; #address-cells = <1>; #size-cells = <0>; - status = "disabled"; - /* PERIPH_ID_SBC6, PLLP_OUT0 */ clocks = <&tegra_car 105>; + status = "disabled"; + }; + + sdhci@78000000 { + compatible = "nvidia,tegra30-sdhci"; + reg = <0x78000000 0x200>; + interrupts = <0 14 0x04>; + clocks = <&tegra_car 14>; + status = "disabled"; + }; + + sdhci@78000200 { + compatible = "nvidia,tegra30-sdhci"; + reg = <0x78000200 0x200>; + interrupts = <0 15 0x04>; + clocks = <&tegra_car 9>; + status = "disabled"; + }; + + sdhci@78000400 { + compatible = "nvidia,tegra30-sdhci"; + reg = <0x78000400 0x200>; + interrupts = <0 19 0x04>; + clocks = <&tegra_car 69>; + status = "disabled"; + }; + + sdhci@78000600 { + compatible = "nvidia,tegra30-sdhci"; + reg = <0x78000600 0x200>; + interrupts = <0 31 0x04>; + clocks = <&tegra_car 15>; + status = "disabled"; }; }; diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h index 872ff820af..ecb5901857 100644 --- a/arch/arm/include/asm/arch-am33xx/clock.h +++ b/arch/arm/include/asm/arch-am33xx/clock.h @@ -3,7 +3,7 @@ * * clock header * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * Copyright (C) 2011, Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h index d748dd2787..89b63d9a8c 100644 --- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h +++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h @@ -3,7 +3,7 @@ * * AM33xx clock define * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -19,37 +19,13 @@ #ifndef _CLOCKS_AM33XX_H_ #define _CLOCKS_AM33XX_H_ -#define OSC (V_OSCK/1000000) - -/* MAIN PLL Fdll = 550 MHZ, */ -#define MPUPLL_M 550 -#define MPUPLL_N (OSC-1) -#define MPUPLL_M2 1 - -/* Core PLL Fdll = 1 GHZ, */ -#define COREPLL_M 1000 -#define COREPLL_N (OSC-1) - -#define COREPLL_M4 10 /* CORE_CLKOUTM4 = 200 MHZ */ -#define COREPLL_M5 8 /* CORE_CLKOUTM5 = 250 MHZ */ -#define COREPLL_M6 4 /* CORE_CLKOUTM6 = 500 MHZ */ - -/* - * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll - * frequency needs to be set to 960 MHZ. Hence, - * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below - */ -#define PERPLL_M 960 -#define PERPLL_N (OSC-1) -#define PERPLL_M2 5 - -/* DDR Freq is 266 MHZ for now */ -/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */ -#define DDRPLL_M 266 -#define DDRPLL_N (OSC-1) -#define DDRPLL_M2 1 +/* MAIN PLL Fdll = 550 MHz, by default */ +#ifndef CONFIG_SYS_MPUCLK +#define CONFIG_SYS_MPUCLK 550 +#endif extern void pll_init(void); extern void enable_emif_clocks(void); +extern void enable_dmm_clocks(void); #endif /* endif _CLOCKS_AM33XX_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 16e8a80700..3d3a7c8ac2 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -42,9 +42,10 @@ #define HS_DEVICE 0x2 #define GP_DEVICE 0x3 -/* cpu-id for AM33XX family */ +/* cpu-id for AM33XX and TI81XX family */ #define AM335X 0xB944 -#define DEVICE_ID 0x44E10600 +#define TI81XX 0xB81E +#define DEVICE_ID (CTRL_BASE + 0x0600) /* This gives the status of the boot mode pins on the evm */ #define SYSBOOT_MASK (BIT(0) | BIT(1) | BIT(2)\ @@ -52,9 +53,11 @@ /* Reset control */ #ifdef CONFIG_AM33XX -#define PRM_RSTCTRL 0x44E00F00 -#define PRM_RSTST 0x44E00F08 +#define PRM_RSTCTRL (PRCM_BASE + 0x0F00) +#elif defined(CONFIG_TI814X) +#define PRM_RSTCTRL (PRCM_BASE + 0x00A0) #endif +#define PRM_RSTST (PRM_RSTCTRL + 8) #define PRM_RSTCTRL_RESET 0x01 #define PRM_RSTST_WARM_RESET_MASK 0x232 diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index ae43ef8778..260cc3484f 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -28,6 +28,7 @@ #define VTP_CTRL_START_EN (0x1) #define PHY_DLL_LOCK_DIFF 0x0 #define DDR_CKE_CTRL_NORMAL 0x1 +#define PHY_EN_DYN_PWRDN (0x1 << 20) /* Micron MT47H128M16RT-25E */ #define MT47H128M16RT25E_EMIF_READ_LATENCY 0x100005 @@ -82,6 +83,23 @@ #define MT41J256M8HX15E_PHY_FIFO_WE 0x100 #define MT41J256M8HX15E_IOCTRL_VALUE 0x18B +/* Micron MT41K256M16HA-125E */ +#define MT41K256M16HA125E_EMIF_READ_LATENCY 0x100006 +#define MT41K256M16HA125E_EMIF_TIM1 0x0888A39B +#define MT41K256M16HA125E_EMIF_TIM2 0x26517FDA +#define MT41K256M16HA125E_EMIF_TIM3 0x501F84EF +#define MT41K256M16HA125E_EMIF_SDCFG 0x61C04BB2 +#define MT41K256M16HA125E_EMIF_SDREF 0x0000093B +#define MT41K256M16HA125E_ZQ_CFG 0x50074BE4 +#define MT41K256M16HA125E_DLL_LOCK_DIFF 0x1 +#define MT41K256M16HA125E_RATIO 0x40 +#define MT41K256M16HA125E_INVERT_CLKOUT 0x0 +#define MT41K256M16HA125E_RD_DQS 0x3C +#define MT41K256M16HA125E_WR_DQS 0x45 +#define MT41K256M16HA125E_PHY_WR_DATA 0x7F +#define MT41K256M16HA125E_PHY_FIFO_WE 0x9B +#define MT41K256M16HA125E_IOCTRL_VALUE 0x18B + /* Micron MT41J512M8RH-125 on EVM v1.5 */ #define MT41J512M8RH125_EMIF_READ_LATENCY 0x06 #define MT41J512M8RH125_EMIF_TIM1 0x0888A39B @@ -100,19 +118,64 @@ #define MT41J512M8RH125_IOCTRL_VALUE 0x18B /** + * Configure DMM + */ +void config_dmm(const struct dmm_lisa_map_regs *regs); + +/** * Configure SDRAM */ -void config_sdram(const struct emif_regs *regs); +void config_sdram(const struct emif_regs *regs, int nr); /** * Set SDRAM timings */ -void set_sdram_timings(const struct emif_regs *regs); +void set_sdram_timings(const struct emif_regs *regs, int nr); /** * Configure DDR PHY */ -void config_ddr_phy(const struct emif_regs *regs); +void config_ddr_phy(const struct emif_regs *regs, int nr); + +struct ddr_cmd_regs { + unsigned int resv0[7]; + unsigned int cm0csratio; /* offset 0x01C */ + unsigned int resv1[2]; + unsigned int cm0dldiff; /* offset 0x028 */ + unsigned int cm0iclkout; /* offset 0x02C */ + unsigned int resv2[8]; + unsigned int cm1csratio; /* offset 0x050 */ + unsigned int resv3[2]; + unsigned int cm1dldiff; /* offset 0x05C */ + unsigned int cm1iclkout; /* offset 0x060 */ + unsigned int resv4[8]; + unsigned int cm2csratio; /* offset 0x084 */ + unsigned int resv5[2]; + unsigned int cm2dldiff; /* offset 0x090 */ + unsigned int cm2iclkout; /* offset 0x094 */ + unsigned int resv6[3]; +}; + +struct ddr_data_regs { + unsigned int dt0rdsratio0; /* offset 0x0C8 */ + unsigned int resv1[4]; + unsigned int dt0wdsratio0; /* offset 0x0DC */ + unsigned int resv2[4]; + unsigned int dt0wiratio0; /* offset 0x0F0 */ + unsigned int resv3; + unsigned int dt0wimode0; /* offset 0x0F8 */ + unsigned int dt0giratio0; /* offset 0x0FC */ + unsigned int resv4; + unsigned int dt0gimode0; /* offset 0x104 */ + unsigned int dt0fwsratio0; /* offset 0x108 */ + unsigned int resv5[4]; + unsigned int dt0dqoffset; /* offset 0x11C */ + unsigned int dt0wrsratio0; /* offset 0x120 */ + unsigned int resv6[4]; + unsigned int dt0rdelays0; /* offset 0x134 */ + unsigned int dt0dldiff0; /* offset 0x138 */ + unsigned int resv7[12]; +}; /** * This structure represents the DDR registers on AM33XX devices. @@ -193,12 +256,12 @@ struct ddr_data { /** * Configure DDR CMD control registers */ -void config_cmd_ctrl(const struct cmd_control *cmd); +void config_cmd_ctrl(const struct cmd_control *cmd, int nr); /** * Configure DDR DATA registers */ -void config_ddr_data(int data_macrono, const struct ddr_data *data); +void config_ddr_data(const struct ddr_data *data, int nr); /** * This structure represents the DDR io control on AM33XX devices. @@ -226,6 +289,6 @@ struct ddr_ctrl { void config_ddr(unsigned int pll, unsigned int ioctrl, const struct ddr_data *data, const struct cmd_control *ctrl, - const struct emif_regs *regs); + const struct emif_regs *regs, int nr); #endif /* _DDR_DEFS_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 6dd3296907..5a27f9cf5e 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -3,7 +3,7 @@ * * hardware specific header * - * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -19,10 +19,17 @@ #ifndef __AM33XX_HARDWARE_H #define __AM33XX_HARDWARE_H +#include <config.h> #include <asm/arch/omap.h> +#ifdef CONFIG_AM33XX +#include <asm/arch/hardware_am33xx.h> +#elif defined(CONFIG_TI814X) +#include <asm/arch/hardware_ti814x.h> +#endif -/* Module base addresses */ -#define UART0_BASE 0x44E09000 +/* + * Common hardware definitions + */ /* DM Timer base addresses */ #define DM_TIMER0_BASE 0x4802C000 @@ -37,21 +44,10 @@ /* GPIO Base address */ #define GPIO0_BASE 0x48032000 #define GPIO1_BASE 0x4804C000 -#define GPIO2_BASE 0x481AC000 /* BCH Error Location Module */ #define ELM_BASE 0x48080000 -/* Watchdog Timer */ -#define WDT_BASE 0x44E35000 - -/* Control Module Base Address */ -#define CTRL_BASE 0x44E10000 -#define CTRL_DEVICE_BASE 0x44E10600 - -/* PRCM Base Address */ -#define PRCM_BASE 0x44E00000 - /* EMIF Base address */ #define EMIF4_0_CFG_BASE 0x4C000000 #define EMIF4_1_CFG_BASE 0x4D000000 @@ -66,13 +62,13 @@ #define PRM_DEVICE 0x44E00F00 /* VTP Base address */ -#define VTP0_CTRL_ADDR 0x44E10E0C +#define VTP1_CTRL_ADDR 0x48140E10 /* DDR Base address */ #define DDR_CTRL_ADDR 0x44E10E04 #define DDR_CONTROL_BASE_ADDR 0x44E11404 -#define DDR_PHY_BASE_ADDR 0x44E12000 -#define DDR_PHY_BASE_ADDR2 0x44E120A4 +#define DDR_PHY_CMD_ADDR2 0x47C0C800 +#define DDR_PHY_DATA_ADDR2 0x47C0C8C8 /* UART */ #define DEFAULT_UART_BASE UART0_BASE @@ -84,14 +80,10 @@ #define GPMC_BASE 0x50000000 /* CPSW Config space */ -#define AM335X_CPSW_BASE 0x4A100000 -#define AM335X_CPSW_MDIO_BASE 0x4A101000 - -/* RTC base address */ -#define AM335X_RTC_BASE 0x44E3E000 +#define CPSW_BASE 0x4A100000 /* OTG */ -#define AM335X_USB0_OTG_BASE 0x47401000 -#define AM335X_USB1_OTG_BASE 0x47401800 +#define USB0_OTG_BASE 0x47401000 +#define USB1_OTG_BASE 0x47401800 #endif /* __AM33XX_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h new file mode 100644 index 0000000000..fa02f195ff --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/hardware_am33xx.h @@ -0,0 +1,54 @@ +/* + * hardware_am33xx.h + * + * AM33xx hardware specific header + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __AM33XX_HARDWARE_AM33XX_H +#define __AM33XX_HARDWARE_AM33XX_H + +/* Module base addresses */ + +/* UART Base Address */ +#define UART0_BASE 0x44E09000 + +/* GPIO Base address */ +#define GPIO2_BASE 0x481AC000 + +/* Watchdog Timer */ +#define WDT_BASE 0x44E35000 + +/* Control Module Base Address */ +#define CTRL_BASE 0x44E10000 +#define CTRL_DEVICE_BASE 0x44E10600 + +/* PRCM Base Address */ +#define PRCM_BASE 0x44E00000 + +/* VTP Base address */ +#define VTP0_CTRL_ADDR 0x44E10E0C + +/* DDR Base address */ +#define DDR_PHY_CMD_ADDR 0x44E12000 +#define DDR_PHY_DATA_ADDR 0x44E120C8 +#define DDR_DATA_REGS_NR 2 + +/* CPSW Config space */ +#define CPSW_MDIO_BASE 0x4A101000 + +/* RTC base address */ +#define RTC_BASE 0x44E3E000 + +#endif /* __AM33XX_HARDWARE_AM33XX_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h new file mode 100644 index 0000000000..a950ac3c18 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/hardware_ti814x.h @@ -0,0 +1,53 @@ +/* + * hardware_ti814x.h + * + * TI814x hardware specific header + * + * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __AM33XX_HARDWARE_TI814X_H +#define __AM33XX_HARDWARE_TI814X_H + +/* Module base addresses */ + +/* UART Base Address */ +#define UART0_BASE 0x48020000 + +/* Watchdog Timer */ +#define WDT_BASE 0x481C7000 + +/* Control Module Base Address */ +#define CTRL_BASE 0x48140000 + +/* PRCM Base Address */ +#define PRCM_BASE 0x48180000 + +/* PLL Subsystem Base Address */ +#define PLL_SUBSYS_BASE 0x481C5000 + +/* VTP Base address */ +#define VTP0_CTRL_ADDR 0x48140E0C + +/* DDR Base address */ +#define DDR_PHY_CMD_ADDR 0x47C0C400 +#define DDR_PHY_DATA_ADDR 0x47C0C4C8 +#define DDR_DATA_REGS_NR 4 + +/* CPSW Config space */ +#define CPSW_MDIO_BASE 0x4A100800 + +/* RTC base address */ +#define RTC_BASE 0x480C0000 + +#endif /* __AM33XX_HARDWARE_TI814X_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h index 1f597c0eec..51ba79190a 100644 --- a/arch/arm/include/asm/arch-am33xx/mmc_host_def.h +++ b/arch/arm/include/asm/arch-am33xx/mmc_host_def.h @@ -16,148 +16,17 @@ #ifndef MMC_HOST_DEF_H #define MMC_HOST_DEF_H +#include <asm/omap_mmc.h> + /* * OMAP HSMMC register definitions */ #define OMAP_HSMMC1_BASE 0x48060100 #define OMAP_HSMMC2_BASE 0x481D8100 -typedef struct hsmmc { - unsigned char res1[0x10]; - unsigned int sysconfig; /* 0x10 */ - unsigned int sysstatus; /* 0x14 */ - unsigned char res2[0x14]; - unsigned int con; /* 0x2C */ - unsigned char res3[0xD4]; - unsigned int blk; /* 0x104 */ - unsigned int arg; /* 0x108 */ - unsigned int cmd; /* 0x10C */ - unsigned int rsp10; /* 0x110 */ - unsigned int rsp32; /* 0x114 */ - unsigned int rsp54; /* 0x118 */ - unsigned int rsp76; /* 0x11C */ - unsigned int data; /* 0x120 */ - unsigned int pstate; /* 0x124 */ - unsigned int hctl; /* 0x128 */ - unsigned int sysctl; /* 0x12C */ - unsigned int stat; /* 0x130 */ - unsigned int ie; /* 0x134 */ - unsigned char res4[0x8]; - unsigned int capa; /* 0x140 */ -} hsmmc_t; - -/* - * OMAP HS MMC Bit definitions - */ -#define MMC_SOFTRESET (0x1 << 1) -#define RESETDONE (0x1 << 0) -#define NOOPENDRAIN (0x0 << 0) -#define OPENDRAIN (0x1 << 0) -#define OD (0x1 << 0) -#define INIT_NOINIT (0x0 << 1) -#define INIT_INITSTREAM (0x1 << 1) -#define HR_NOHOSTRESP (0x0 << 2) -#define STR_BLOCK (0x0 << 3) -#define MODE_FUNC (0x0 << 4) -#define DW8_1_4BITMODE (0x0 << 5) -#define MIT_CTO (0x0 << 6) -#define CDP_ACTIVEHIGH (0x0 << 7) -#define WPP_ACTIVEHIGH (0x0 << 8) -#define RESERVED_MASK (0x3 << 9) -#define CTPL_MMC_SD (0x0 << 11) -#define BLEN_512BYTESLEN (0x200 << 0) -#define NBLK_STPCNT (0x0 << 16) -#define DE_DISABLE (0x0 << 0) -#define BCE_DISABLE (0x0 << 1) -#define BCE_ENABLE (0x1 << 1) -#define ACEN_DISABLE (0x0 << 2) -#define DDIR_OFFSET (4) -#define DDIR_MASK (0x1 << 4) -#define DDIR_WRITE (0x0 << 4) -#define DDIR_READ (0x1 << 4) -#define MSBS_SGLEBLK (0x0 << 5) -#define MSBS_MULTIBLK (0x1 << 5) -#define RSP_TYPE_OFFSET (16) -#define RSP_TYPE_MASK (0x3 << 16) -#define RSP_TYPE_NORSP (0x0 << 16) -#define RSP_TYPE_LGHT136 (0x1 << 16) -#define RSP_TYPE_LGHT48 (0x2 << 16) -#define RSP_TYPE_LGHT48B (0x3 << 16) -#define CCCE_NOCHECK (0x0 << 19) -#define CCCE_CHECK (0x1 << 19) -#define CICE_NOCHECK (0x0 << 20) -#define CICE_CHECK (0x1 << 20) -#define DP_OFFSET (21) -#define DP_MASK (0x1 << 21) -#define DP_NO_DATA (0x0 << 21) -#define DP_DATA (0x1 << 21) -#define CMD_TYPE_NORMAL (0x0 << 22) -#define INDEX_OFFSET (24) -#define INDEX_MASK (0x3f << 24) -#define INDEX(i) (i << 24) -#define DATI_MASK (0x1 << 1) -#define CMDI_MASK (0x1 << 0) -#define DTW_1_BITMODE (0x0 << 1) -#define DTW_4_BITMODE (0x1 << 1) -#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ -#define SDBP_PWROFF (0x0 << 8) -#define SDBP_PWRON (0x1 << 8) -#define SDVS_1V8 (0x5 << 9) -#define SDVS_3V0 (0x6 << 9) -#define ICE_MASK (0x1 << 0) -#define ICE_STOP (0x0 << 0) -#define ICS_MASK (0x1 << 1) -#define ICS_NOTREADY (0x0 << 1) -#define ICE_OSCILLATE (0x1 << 0) -#define CEN_MASK (0x1 << 2) -#define CEN_DISABLE (0x0 << 2) -#define CEN_ENABLE (0x1 << 2) -#define CLKD_OFFSET (6) -#define CLKD_MASK (0x3FF << 6) -#define DTO_MASK (0xF << 16) -#define DTO_15THDTO (0xE << 16) -#define SOFTRESETALL (0x1 << 24) -#define CC_MASK (0x1 << 0) -#define TC_MASK (0x1 << 1) -#define BWR_MASK (0x1 << 4) -#define BRR_MASK (0x1 << 5) -#define ERRI_MASK (0x1 << 15) -#define IE_CC (0x01 << 0) -#define IE_TC (0x01 << 1) -#define IE_BWR (0x01 << 4) -#define IE_BRR (0x01 << 5) -#define IE_CTO (0x01 << 16) -#define IE_CCRC (0x01 << 17) -#define IE_CEB (0x01 << 18) -#define IE_CIE (0x01 << 19) -#define IE_DTO (0x01 << 20) -#define IE_DCRC (0x01 << 21) -#define IE_DEB (0x01 << 22) -#define IE_CERR (0x01 << 28) -#define IE_BADA (0x01 << 29) - -#define VS30_3V0SUP (1 << 25) -#define VS18_1V8SUP (1 << 26) - -/* Driver definitions */ -#define MMCSD_SECTOR_SIZE 512 -#define MMC_CARD 0 -#define SD_CARD 1 -#define BYTE_MODE 0 -#define SECTOR_MODE 1 -#define CLK_INITSEQ 0 -#define CLK_400KHZ 1 -#define CLK_MISC 2 - -#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) -#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) - -/* Clock Configurations and Macros */ -#define MMC_CLOCK_REFERENCE 96 /* MHz */ - -#define mmc_reg_out(addr, mask, val)\ - writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) - -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max); +#if defined(CONFIG_TI814X) +#undef MMC_CLOCK_REFERENCE +#define MMC_CLOCK_REFERENCE 192 /* MHz */ +#endif #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h index 460ac1c02d..1c6b65f4a0 100644 --- a/arch/arm/include/asm/arch-am33xx/mux.h +++ b/arch/arm/include/asm/arch-am33xx/mux.h @@ -1,7 +1,7 @@ /* * mux.h * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -19,234 +19,15 @@ #include <common.h> #include <asm/io.h> -#define MUX_CFG(value, offset) \ - __raw_writel(value, (CTRL_BASE + offset)); - -/* PAD Control Fields */ -#define SLEWCTRL (0x1 << 6) -#define RXACTIVE (0x1 << 5) -#define PULLDOWN_EN (0x0 << 4) /* Pull Down Selection */ -#define PULLUP_EN (0x1 << 4) /* Pull Up Selection */ -#define PULLUDEN (0x0 << 3) /* Pull up enabled */ -#define PULLUDDIS (0x1 << 3) /* Pull up disabled */ -#define MODE(val) val /* used for Readability */ - -/* - * PAD CONTROL OFFSETS - * Field names corresponds to the pad signal name - */ -struct pad_signals { - int gpmc_ad0; - int gpmc_ad1; - int gpmc_ad2; - int gpmc_ad3; - int gpmc_ad4; - int gpmc_ad5; - int gpmc_ad6; - int gpmc_ad7; - int gpmc_ad8; - int gpmc_ad9; - int gpmc_ad10; - int gpmc_ad11; - int gpmc_ad12; - int gpmc_ad13; - int gpmc_ad14; - int gpmc_ad15; - int gpmc_a0; - int gpmc_a1; - int gpmc_a2; - int gpmc_a3; - int gpmc_a4; - int gpmc_a5; - int gpmc_a6; - int gpmc_a7; - int gpmc_a8; - int gpmc_a9; - int gpmc_a10; - int gpmc_a11; - int gpmc_wait0; - int gpmc_wpn; - int gpmc_be1n; - int gpmc_csn0; - int gpmc_csn1; - int gpmc_csn2; - int gpmc_csn3; - int gpmc_clk; - int gpmc_advn_ale; - int gpmc_oen_ren; - int gpmc_wen; - int gpmc_be0n_cle; - int lcd_data0; - int lcd_data1; - int lcd_data2; - int lcd_data3; - int lcd_data4; - int lcd_data5; - int lcd_data6; - int lcd_data7; - int lcd_data8; - int lcd_data9; - int lcd_data10; - int lcd_data11; - int lcd_data12; - int lcd_data13; - int lcd_data14; - int lcd_data15; - int lcd_vsync; - int lcd_hsync; - int lcd_pclk; - int lcd_ac_bias_en; - int mmc0_dat3; - int mmc0_dat2; - int mmc0_dat1; - int mmc0_dat0; - int mmc0_clk; - int mmc0_cmd; - int mii1_col; - int mii1_crs; - int mii1_rxerr; - int mii1_txen; - int mii1_rxdv; - int mii1_txd3; - int mii1_txd2; - int mii1_txd1; - int mii1_txd0; - int mii1_txclk; - int mii1_rxclk; - int mii1_rxd3; - int mii1_rxd2; - int mii1_rxd1; - int mii1_rxd0; - int rmii1_refclk; - int mdio_data; - int mdio_clk; - int spi0_sclk; - int spi0_d0; - int spi0_d1; - int spi0_cs0; - int spi0_cs1; - int ecap0_in_pwm0_out; - int uart0_ctsn; - int uart0_rtsn; - int uart0_rxd; - int uart0_txd; - int uart1_ctsn; - int uart1_rtsn; - int uart1_rxd; - int uart1_txd; - int i2c0_sda; - int i2c0_scl; - int mcasp0_aclkx; - int mcasp0_fsx; - int mcasp0_axr0; - int mcasp0_ahclkr; - int mcasp0_aclkr; - int mcasp0_fsr; - int mcasp0_axr1; - int mcasp0_ahclkx; - int xdma_event_intr0; - int xdma_event_intr1; - int nresetin_out; - int porz; - int nnmi; - int osc0_in; - int osc0_out; - int rsvd1; - int tms; - int tdi; - int tdo; - int tck; - int ntrst; - int emu0; - int emu1; - int osc1_in; - int osc1_out; - int pmic_power_en; - int rtc_porz; - int rsvd2; - int ext_wakeup; - int enz_kaldo_1p8v; - int usb0_dm; - int usb0_dp; - int usb0_ce; - int usb0_id; - int usb0_vbus; - int usb0_drvvbus; - int usb1_dm; - int usb1_dp; - int usb1_ce; - int usb1_id; - int usb1_vbus; - int usb1_drvvbus; - int ddr_resetn; - int ddr_csn0; - int ddr_cke; - int ddr_ck; - int ddr_nck; - int ddr_casn; - int ddr_rasn; - int ddr_wen; - int ddr_ba0; - int ddr_ba1; - int ddr_ba2; - int ddr_a0; - int ddr_a1; - int ddr_a2; - int ddr_a3; - int ddr_a4; - int ddr_a5; - int ddr_a6; - int ddr_a7; - int ddr_a8; - int ddr_a9; - int ddr_a10; - int ddr_a11; - int ddr_a12; - int ddr_a13; - int ddr_a14; - int ddr_a15; - int ddr_odt; - int ddr_d0; - int ddr_d1; - int ddr_d2; - int ddr_d3; - int ddr_d4; - int ddr_d5; - int ddr_d6; - int ddr_d7; - int ddr_d8; - int ddr_d9; - int ddr_d10; - int ddr_d11; - int ddr_d12; - int ddr_d13; - int ddr_d14; - int ddr_d15; - int ddr_dqm0; - int ddr_dqm1; - int ddr_dqs0; - int ddr_dqsn0; - int ddr_dqs1; - int ddr_dqsn1; - int ddr_vref; - int ddr_vtp; - int ddr_strben0; - int ddr_strben1; - int ain7; - int ain6; - int ain5; - int ain4; - int ain3; - int ain2; - int ain1; - int ain0; - int vrefp; - int vrefn; -}; +#ifdef CONFIG_AM33XX +#include <asm/arch/mux_am33xx.h> +#elif defined(CONFIG_TI814X) +#include <asm/arch/mux_ti814x.h> +#endif struct module_pin_mux { short reg_offset; - unsigned char val; + unsigned int val; }; /* Pad control register offset */ @@ -259,4 +40,4 @@ struct module_pin_mux { */ void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux); -#endif +#endif /* endif _MUX_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mux_am33xx.h b/arch/arm/include/asm/arch-am33xx/mux_am33xx.h new file mode 100644 index 0000000000..d5cab3e083 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/mux_am33xx.h @@ -0,0 +1,247 @@ +/* + * mux_am33xx.h + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MUX_AM33XX_H_ +#define _MUX_AM33XX_H_ + +#include <common.h> +#include <asm/io.h> + +#define MUX_CFG(value, offset) \ + __raw_writel(value, (CTRL_BASE + offset)); + +/* PAD Control Fields */ +#define SLEWCTRL (0x1 << 6) +#define RXACTIVE (0x1 << 5) +#define PULLDOWN_EN (0x0 << 4) /* Pull Down Selection */ +#define PULLUP_EN (0x1 << 4) /* Pull Up Selection */ +#define PULLUDEN (0x0 << 3) /* Pull up enabled */ +#define PULLUDDIS (0x1 << 3) /* Pull up disabled */ +#define MODE(val) val /* used for Readability */ + +/* + * PAD CONTROL OFFSETS + * Field names corresponds to the pad signal name + */ +struct pad_signals { + int gpmc_ad0; + int gpmc_ad1; + int gpmc_ad2; + int gpmc_ad3; + int gpmc_ad4; + int gpmc_ad5; + int gpmc_ad6; + int gpmc_ad7; + int gpmc_ad8; + int gpmc_ad9; + int gpmc_ad10; + int gpmc_ad11; + int gpmc_ad12; + int gpmc_ad13; + int gpmc_ad14; + int gpmc_ad15; + int gpmc_a0; + int gpmc_a1; + int gpmc_a2; + int gpmc_a3; + int gpmc_a4; + int gpmc_a5; + int gpmc_a6; + int gpmc_a7; + int gpmc_a8; + int gpmc_a9; + int gpmc_a10; + int gpmc_a11; + int gpmc_wait0; + int gpmc_wpn; + int gpmc_be1n; + int gpmc_csn0; + int gpmc_csn1; + int gpmc_csn2; + int gpmc_csn3; + int gpmc_clk; + int gpmc_advn_ale; + int gpmc_oen_ren; + int gpmc_wen; + int gpmc_be0n_cle; + int lcd_data0; + int lcd_data1; + int lcd_data2; + int lcd_data3; + int lcd_data4; + int lcd_data5; + int lcd_data6; + int lcd_data7; + int lcd_data8; + int lcd_data9; + int lcd_data10; + int lcd_data11; + int lcd_data12; + int lcd_data13; + int lcd_data14; + int lcd_data15; + int lcd_vsync; + int lcd_hsync; + int lcd_pclk; + int lcd_ac_bias_en; + int mmc0_dat3; + int mmc0_dat2; + int mmc0_dat1; + int mmc0_dat0; + int mmc0_clk; + int mmc0_cmd; + int mii1_col; + int mii1_crs; + int mii1_rxerr; + int mii1_txen; + int mii1_rxdv; + int mii1_txd3; + int mii1_txd2; + int mii1_txd1; + int mii1_txd0; + int mii1_txclk; + int mii1_rxclk; + int mii1_rxd3; + int mii1_rxd2; + int mii1_rxd1; + int mii1_rxd0; + int rmii1_refclk; + int mdio_data; + int mdio_clk; + int spi0_sclk; + int spi0_d0; + int spi0_d1; + int spi0_cs0; + int spi0_cs1; + int ecap0_in_pwm0_out; + int uart0_ctsn; + int uart0_rtsn; + int uart0_rxd; + int uart0_txd; + int uart1_ctsn; + int uart1_rtsn; + int uart1_rxd; + int uart1_txd; + int i2c0_sda; + int i2c0_scl; + int mcasp0_aclkx; + int mcasp0_fsx; + int mcasp0_axr0; + int mcasp0_ahclkr; + int mcasp0_aclkr; + int mcasp0_fsr; + int mcasp0_axr1; + int mcasp0_ahclkx; + int xdma_event_intr0; + int xdma_event_intr1; + int nresetin_out; + int porz; + int nnmi; + int osc0_in; + int osc0_out; + int rsvd1; + int tms; + int tdi; + int tdo; + int tck; + int ntrst; + int emu0; + int emu1; + int osc1_in; + int osc1_out; + int pmic_power_en; + int rtc_porz; + int rsvd2; + int ext_wakeup; + int enz_kaldo_1p8v; + int usb0_dm; + int usb0_dp; + int usb0_ce; + int usb0_id; + int usb0_vbus; + int usb0_drvvbus; + int usb1_dm; + int usb1_dp; + int usb1_ce; + int usb1_id; + int usb1_vbus; + int usb1_drvvbus; + int ddr_resetn; + int ddr_csn0; + int ddr_cke; + int ddr_ck; + int ddr_nck; + int ddr_casn; + int ddr_rasn; + int ddr_wen; + int ddr_ba0; + int ddr_ba1; + int ddr_ba2; + int ddr_a0; + int ddr_a1; + int ddr_a2; + int ddr_a3; + int ddr_a4; + int ddr_a5; + int ddr_a6; + int ddr_a7; + int ddr_a8; + int ddr_a9; + int ddr_a10; + int ddr_a11; + int ddr_a12; + int ddr_a13; + int ddr_a14; + int ddr_a15; + int ddr_odt; + int ddr_d0; + int ddr_d1; + int ddr_d2; + int ddr_d3; + int ddr_d4; + int ddr_d5; + int ddr_d6; + int ddr_d7; + int ddr_d8; + int ddr_d9; + int ddr_d10; + int ddr_d11; + int ddr_d12; + int ddr_d13; + int ddr_d14; + int ddr_d15; + int ddr_dqm0; + int ddr_dqm1; + int ddr_dqs0; + int ddr_dqsn0; + int ddr_dqs1; + int ddr_dqsn1; + int ddr_vref; + int ddr_vtp; + int ddr_strben0; + int ddr_strben1; + int ain7; + int ain6; + int ain5; + int ain4; + int ain3; + int ain2; + int ain1; + int ain0; + int vrefp; + int vrefn; +}; + +#endif /* endif _MUX_AM33XX_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/mux_ti814x.h b/arch/arm/include/asm/arch-am33xx/mux_ti814x.h new file mode 100644 index 0000000000..a26e5038f7 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/mux_ti814x.h @@ -0,0 +1,311 @@ +/* + * mux_ti814x.h + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MUX_TI814X_H_ +#define _MUX_TI814X_H_ + +/* PAD Control Fields */ +#define PINCNTL_RSV_MSK (0x3 << 18) /* Reserved bitmask */ +#define PULLUP_EN (0x1 << 17) /* Pull UP Selection */ +#define PULLUDEN (0x0 << 16) /* Pull up enabled */ +#define PULLUDDIS (0x1 << 16) /* Pull up disabled */ +#define MODE(val) val /* used for Readability */ + +#define MUX_CFG(value, offset) \ +{ \ + int tmp; \ + tmp = __raw_readl(CTRL_BASE + offset); \ + tmp &= PINCNTL_RSV_MSK; \ + __raw_writel(tmp | value, (CTRL_BASE + offset));\ +} + +/* + * PAD CONTROL OFFSETS + * Field names corresponds to the pad signal name + */ +struct pad_signals { + int pincntl1; + int pincntl2; + int pincntl3; + int pincntl4; + int pincntl5; + int pincntl6; + int pincntl7; + int pincntl8; + int pincntl9; + int pincntl10; + int pincntl11; + int pincntl12; + int pincntl13; + int pincntl14; + int pincntl15; + int pincntl16; + int pincntl17; + int pincntl18; + int pincntl19; + int pincntl20; + int pincntl21; + int pincntl22; + int pincntl23; + int pincntl24; + int pincntl25; + int pincntl26; + int pincntl27; + int pincntl28; + int pincntl29; + int pincntl30; + int pincntl31; + int pincntl32; + int pincntl33; + int pincntl34; + int pincntl35; + int pincntl36; + int pincntl37; + int pincntl38; + int pincntl39; + int pincntl40; + int pincntl41; + int pincntl42; + int pincntl43; + int pincntl44; + int pincntl45; + int pincntl46; + int pincntl47; + int pincntl48; + int pincntl49; + int pincntl50; + int pincntl51; + int pincntl52; + int pincntl53; + int pincntl54; + int pincntl55; + int pincntl56; + int pincntl57; + int pincntl58; + int pincntl59; + int pincntl60; + int pincntl61; + int pincntl62; + int pincntl63; + int pincntl64; + int pincntl65; + int pincntl66; + int pincntl67; + int pincntl68; + int pincntl69; + int pincntl70; + int pincntl71; + int pincntl72; + int pincntl73; + int pincntl74; + int pincntl75; + int pincntl76; + int pincntl77; + int pincntl78; + int pincntl79; + int pincntl80; + int pincntl81; + int pincntl82; + int pincntl83; + int pincntl84; + int pincntl85; + int pincntl86; + int pincntl87; + int pincntl88; + int pincntl89; + int pincntl90; + int pincntl91; + int pincntl92; + int pincntl93; + int pincntl94; + int pincntl95; + int pincntl96; + int pincntl97; + int pincntl98; + int pincntl99; + int pincntl100; + int pincntl101; + int pincntl102; + int pincntl103; + int pincntl104; + int pincntl105; + int pincntl106; + int pincntl107; + int pincntl108; + int pincntl109; + int pincntl110; + int pincntl111; + int pincntl112; + int pincntl113; + int pincntl114; + int pincntl115; + int pincntl116; + int pincntl117; + int pincntl118; + int pincntl119; + int pincntl120; + int pincntl121; + int pincntl122; + int pincntl123; + int pincntl124; + int pincntl125; + int pincntl126; + int pincntl127; + int pincntl128; + int pincntl129; + int pincntl130; + int pincntl131; + int pincntl132; + int pincntl133; + int pincntl134; + int pincntl135; + int pincntl136; + int pincntl137; + int pincntl138; + int pincntl139; + int pincntl140; + int pincntl141; + int pincntl142; + int pincntl143; + int pincntl144; + int pincntl145; + int pincntl146; + int pincntl147; + int pincntl148; + int pincntl149; + int pincntl150; + int pincntl151; + int pincntl152; + int pincntl153; + int pincntl154; + int pincntl155; + int pincntl156; + int pincntl157; + int pincntl158; + int pincntl159; + int pincntl160; + int pincntl161; + int pincntl162; + int pincntl163; + int pincntl164; + int pincntl165; + int pincntl166; + int pincntl167; + int pincntl168; + int pincntl169; + int pincntl170; + int pincntl171; + int pincntl172; + int pincntl173; + int pincntl174; + int pincntl175; + int pincntl176; + int pincntl177; + int pincntl178; + int pincntl179; + int pincntl180; + int pincntl181; + int pincntl182; + int pincntl183; + int pincntl184; + int pincntl185; + int pincntl186; + int pincntl187; + int pincntl188; + int pincntl189; + int pincntl190; + int pincntl191; + int pincntl192; + int pincntl193; + int pincntl194; + int pincntl195; + int pincntl196; + int pincntl197; + int pincntl198; + int pincntl199; + int pincntl200; + int pincntl201; + int pincntl202; + int pincntl203; + int pincntl204; + int pincntl205; + int pincntl206; + int pincntl207; + int pincntl208; + int pincntl209; + int pincntl210; + int pincntl211; + int pincntl212; + int pincntl213; + int pincntl214; + int pincntl215; + int pincntl216; + int pincntl217; + int pincntl218; + int pincntl219; + int pincntl220; + int pincntl221; + int pincntl222; + int pincntl223; + int pincntl224; + int pincntl225; + int pincntl226; + int pincntl227; + int pincntl228; + int pincntl229; + int pincntl230; + int pincntl231; + int pincntl232; + int pincntl233; + int pincntl234; + int pincntl235; + int pincntl236; + int pincntl237; + int pincntl238; + int pincntl239; + int pincntl240; + int pincntl241; + int pincntl242; + int pincntl243; + int pincntl244; + int pincntl245; + int pincntl246; + int pincntl247; + int pincntl248; + int pincntl249; + int pincntl250; + int pincntl251; + int pincntl252; + int pincntl253; + int pincntl254; + int pincntl255; + int pincntl256; + int pincntl257; + int pincntl258; + int pincntl259; + int pincntl260; + int pincntl261; + int pincntl262; + int pincntl263; + int pincntl264; + int pincntl265; + int pincntl266; + int pincntl267; + int pincntl268; + int pincntl269; + int pincntl270; +}; + +#endif /* endif _MUX_TI814X_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h index 850f8a551d..d28f9a83ff 100644 --- a/arch/arm/include/asm/arch-am33xx/omap.h +++ b/arch/arm/include/asm/arch-am33xx/omap.h @@ -28,8 +28,13 @@ * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE * at 0x40304000(EMU base) so that our code works for both EMU and GP */ +#ifdef CONFIG_AM33XX #define NON_SECURE_SRAM_START 0x40304000 #define NON_SECURE_SRAM_END 0x4030E000 +#elif defined(CONFIG_TI814X) +#define NON_SECURE_SRAM_START 0x40300000 +#define NON_SECURE_SRAM_END 0x40320000 +#endif /* ROM code defines */ /* Boot device */ diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index 644ff353fe..f60b086366 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -25,10 +25,16 @@ #define BOOT_DEVICE_XIP 2 #define BOOT_DEVICE_NAND 5 +#ifdef CONFIG_AM33XX #define BOOT_DEVICE_MMC1 8 #define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ +#elif defined(CONFIG_TI814X) +#define BOOT_DEVICE_MMC1 9 +#define BOOT_DEVICE_MMC2 8 /* ROM only supports 2nd instance */ +#endif #define BOOT_DEVICE_SPI 11 #define BOOT_DEVICE_UART 65 +#define BOOT_DEVICE_USBETH 68 #define BOOT_DEVICE_CPGMAC 70 #define BOOT_DEVICE_MMC2_2 0xFF #endif diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 588d8de82f..0910a9451a 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -34,6 +34,10 @@ void setup_clocks_for_console(void); void ddr_pll_config(unsigned int ddrpll_M); void sdelay(unsigned long); + +struct gpmc_cs; void gpmc_init(void); +void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, + u32 size); void omap_nand_switch_ecc(int); #endif diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h index de0f1b1923..b7d1932f42 100644 --- a/arch/arm/include/asm/arch-at91/at91sam9x5.h +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h @@ -140,12 +140,6 @@ /* * Cpu Name */ -#define CONFIG_SYS_AT91_G15_CPU_NAME "AT91SAM9G15" -#define CONFIG_SYS_AT91_G25_CPU_NAME "AT91SAM9G25" -#define CONFIG_SYS_AT91_G35_CPU_NAME "AT91SAM9G35" -#define CONFIG_SYS_AT91_X25_CPU_NAME "AT91SAM9X25" -#define CONFIG_SYS_AT91_X35_CPU_NAME "AT91SAM9X35" -#define CONFIG_SYS_AT91_UNKNOWN_CPU "Unknown CPU type" #define ATMEL_CPU_NAME get_cpu_name() /* diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h new file mode 100644 index 0000000000..b07c4a02bb --- /dev/null +++ b/arch/arm/include/asm/arch-bcm2835/mbox.h @@ -0,0 +1,433 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BCM2835_MBOX_H +#define _BCM2835_MBOX_H + +#include <linux/compiler.h> + +/* + * The BCM2835 SoC contains (at least) two CPUs; the VideoCore (a/k/a "GPU") + * and the ARM CPU. The ARM CPU is often thought of as the main CPU. + * However, the VideoCore actually controls the initial SoC boot, and hides + * much of the hardware behind a protocol. This protocol is transported + * using the SoC's mailbox hardware module. + * + * The mailbox hardware supports passing 32-bit values back and forth. + * Presumably by software convention of the firmware, the bottom 4 bits of the + * value are used to indicate a logical channel, and the upper 28 bits are the + * actual payload. Various channels exist using these simple raw messages. See + * https://github.com/raspberrypi/firmware/wiki/Mailboxes for a list. As an + * example, the messages on the power management channel are a bitmask of + * devices whose power should be enabled. + * + * The property mailbox channel passes messages that contain the (16-byte + * aligned) ARM physical address of a memory buffer. This buffer is passed to + * the VC for processing, is modified in-place by the VC, and the address then + * passed back to the ARM CPU as the response mailbox message to indicate + * request completion. The buffers have a generic and extensible format; each + * buffer contains a standard header, a list of "tags", and a terminating zero + * entry. Each tag contains an ID indicating its type, and length fields for + * generic parsing. With some limitations, an arbitrary set of tags may be + * combined together into a single message buffer. This file defines structs + * representing the header and many individual tag layouts and IDs. + */ + +/* Raw mailbox HW */ + +#define BCM2835_MBOX_PHYSADDR 0x2000b880 + +struct bcm2835_mbox_regs { + u32 read; + u32 rsvd0[5]; + u32 status; + u32 config; + u32 write; +}; + +#define BCM2835_MBOX_STATUS_WR_FULL 0x80000000 +#define BCM2835_MBOX_STATUS_RD_EMPTY 0x40000000 + +/* Lower 4-bits are channel ID */ +#define BCM2835_CHAN_MASK 0xf +#define BCM2835_MBOX_PACK(chan, data) (((data) & (~BCM2835_CHAN_MASK)) | \ + (chan & BCM2835_CHAN_MASK)) +#define BCM2835_MBOX_UNPACK_CHAN(val) ((val) & BCM2835_CHAN_MASK) +#define BCM2835_MBOX_UNPACK_DATA(val) ((val) & (~BCM2835_CHAN_MASK)) + +/* Property mailbox buffer structures */ + +#define BCM2835_MBOX_PROP_CHAN 8 + +/* All message buffers must start with this header */ +struct bcm2835_mbox_hdr { + u32 buf_size; + u32 code; +}; + +#define BCM2835_MBOX_REQ_CODE 0 +#define BCM2835_MBOX_RESP_CODE_SUCCESS 0x80000000 + +#define BCM2835_MBOX_INIT_HDR(_m_) { \ + memset((_m_), 0, sizeof(*(_m_))); \ + (_m_)->hdr.buf_size = sizeof(*(_m_)); \ + (_m_)->hdr.code = 0; \ + (_m_)->end_tag = 0; \ + } + +/* + * A message buffer contains a list of tags. Each tag must also start with + * a standardized header. + */ +struct bcm2835_mbox_tag_hdr { + u32 tag; + u32 val_buf_size; + u32 val_len; +}; + +#define BCM2835_MBOX_INIT_TAG(_t_, _id_) { \ + (_t_)->tag_hdr.tag = BCM2835_MBOX_TAG_##_id_; \ + (_t_)->tag_hdr.val_buf_size = sizeof((_t_)->body); \ + (_t_)->tag_hdr.val_len = sizeof((_t_)->body.req); \ + } + +#define BCM2835_MBOX_INIT_TAG_NO_REQ(_t_, _id_) { \ + (_t_)->tag_hdr.tag = BCM2835_MBOX_TAG_##_id_; \ + (_t_)->tag_hdr.val_buf_size = sizeof((_t_)->body); \ + (_t_)->tag_hdr.val_len = 0; \ + } + +/* When responding, the VC sets this bit in val_len to indicate a response */ +#define BCM2835_MBOX_TAG_VAL_LEN_RESPONSE 0x80000000 + +/* + * Below we define the ID and struct for many possible tags. This header only + * defines individual tag structs, not entire message structs, since in + * general an arbitrary set of tags may be combined into a single message. + * Clients of the mbox API are expected to define their own overall message + * structures by combining the header, a set of tags, and a terminating + * entry. For example, + * + * struct msg { + * struct bcm2835_mbox_hdr hdr; + * struct bcm2835_mbox_tag_get_arm_mem get_arm_mem; + * ... perhaps other tags here ... + * u32 end_tag; + * }; + */ + +#define BCM2835_MBOX_TAG_GET_ARM_MEMORY 0x00010005 + +struct bcm2835_mbox_tag_get_arm_mem { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + } req; + struct { + u32 mem_base; + u32 mem_size; + } resp; + } body; +}; + +#define BCM2835_MBOX_TAG_GET_CLOCK_RATE 0x00030002 + +#define BCM2835_MBOX_CLOCK_ID_EMMC 1 +#define BCM2835_MBOX_CLOCK_ID_UART 2 +#define BCM2835_MBOX_CLOCK_ID_ARM 3 +#define BCM2835_MBOX_CLOCK_ID_CORE 4 +#define BCM2835_MBOX_CLOCK_ID_V3D 5 +#define BCM2835_MBOX_CLOCK_ID_H264 6 +#define BCM2835_MBOX_CLOCK_ID_ISP 7 +#define BCM2835_MBOX_CLOCK_ID_SDRAM 8 +#define BCM2835_MBOX_CLOCK_ID_PIXEL 9 +#define BCM2835_MBOX_CLOCK_ID_PWM 10 + +struct bcm2835_mbox_tag_get_clock_rate { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + u32 clock_id; + } req; + struct { + u32 clock_id; + u32 rate_hz; + } resp; + } body; +}; + +#define BCM2835_MBOX_TAG_ALLOCATE_BUFFER 0x00040001 + +struct bcm2835_mbox_tag_allocate_buffer { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + u32 alignment; + } req; + struct { + u32 fb_address; + u32 fb_size; + } resp; + } body; +}; + +#define BCM2835_MBOX_TAG_RELEASE_BUFFER 0x00048001 + +struct bcm2835_mbox_tag_release_buffer { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + } req; + struct { + } resp; + } body; +}; + +#define BCM2835_MBOX_TAG_BLANK_SCREEN 0x00040002 + +struct bcm2835_mbox_tag_blank_screen { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + /* bit 0 means on, other bots reserved */ + u32 state; + } req; + struct { + u32 state; + } resp; + } body; +}; + +/* Physical means output signal */ +#define BCM2835_MBOX_TAG_GET_PHYSICAL_W_H 0x00040003 +#define BCM2835_MBOX_TAG_TEST_PHYSICAL_W_H 0x00044003 +#define BCM2835_MBOX_TAG_SET_PHYSICAL_W_H 0x00048003 + +struct bcm2835_mbox_tag_physical_w_h { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + /* req not used for get */ + struct { + u32 width; + u32 height; + } req; + struct { + u32 width; + u32 height; + } resp; + } body; +}; + +/* Virtual means display buffer */ +#define BCM2835_MBOX_TAG_GET_VIRTUAL_W_H 0x00040004 +#define BCM2835_MBOX_TAG_TEST_VIRTUAL_W_H 0x00044004 +#define BCM2835_MBOX_TAG_SET_VIRTUAL_W_H 0x00048004 + +struct bcm2835_mbox_tag_virtual_w_h { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + /* req not used for get */ + struct { + u32 width; + u32 height; + } req; + struct { + u32 width; + u32 height; + } resp; + } body; +}; + +#define BCM2835_MBOX_TAG_GET_DEPTH 0x00040005 +#define BCM2835_MBOX_TAG_TEST_DEPTH 0x00044005 +#define BCM2835_MBOX_TAG_SET_DEPTH 0x00048005 + +struct bcm2835_mbox_tag_depth { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + /* req not used for get */ + struct { + u32 bpp; + } req; + struct { + u32 bpp; + } resp; + } body; +}; + +#define BCM2835_MBOX_TAG_GET_PIXEL_ORDER 0x00040006 +#define BCM2835_MBOX_TAG_TEST_PIXEL_ORDER 0x00044005 +#define BCM2835_MBOX_TAG_SET_PIXEL_ORDER 0x00048006 + +#define BCM2835_MBOX_PIXEL_ORDER_BGR 0 +#define BCM2835_MBOX_PIXEL_ORDER_RGB 1 + +struct bcm2835_mbox_tag_pixel_order { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + /* req not used for get */ + struct { + u32 order; + } req; + struct { + u32 order; + } resp; + } body; +}; + +#define BCM2835_MBOX_TAG_GET_ALPHA_MODE 0x00040007 +#define BCM2835_MBOX_TAG_TEST_ALPHA_MODE 0x00044007 +#define BCM2835_MBOX_TAG_SET_ALPHA_MODE 0x00048007 + +#define BCM2835_MBOX_ALPHA_MODE_0_OPAQUE 0 +#define BCM2835_MBOX_ALPHA_MODE_0_TRANSPARENT 1 +#define BCM2835_MBOX_ALPHA_MODE_IGNORED 2 + +struct bcm2835_mbox_tag_alpha_mode { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + /* req not used for get */ + struct { + u32 alpha; + } req; + struct { + u32 alpha; + } resp; + } body; +}; + +#define BCM2835_MBOX_TAG_GET_PITCH 0x00040008 + +struct bcm2835_mbox_tag_pitch { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + } req; + struct { + u32 pitch; + } resp; + } body; +}; + +/* Offset of display window within buffer */ +#define BCM2835_MBOX_TAG_GET_VIRTUAL_OFFSET 0x00040009 +#define BCM2835_MBOX_TAG_TEST_VIRTUAL_OFFSET 0x00044009 +#define BCM2835_MBOX_TAG_SET_VIRTUAL_OFFSET 0x00048009 + +struct bcm2835_mbox_tag_virtual_offset { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + /* req not used for get */ + struct { + u32 x; + u32 y; + } req; + struct { + u32 x; + u32 y; + } resp; + } body; +}; + +#define BCM2835_MBOX_TAG_GET_OVERSCAN 0x0004000a +#define BCM2835_MBOX_TAG_TEST_OVERSCAN 0x0004400a +#define BCM2835_MBOX_TAG_SET_OVERSCAN 0x0004800a + +struct bcm2835_mbox_tag_overscan { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + /* req not used for get */ + struct { + u32 top; + u32 bottom; + u32 left; + u32 right; + } req; + struct { + u32 top; + u32 bottom; + u32 left; + } resp; + } body; +}; + +#define BCM2835_MBOX_TAG_GET_PALETTE 0x0004000b + +struct bcm2835_mbox_tag_get_palette { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + } req; + struct { + u32 data[1024]; + } resp; + } body; +}; + +#define BCM2835_MBOX_TAG_TEST_PALETTE 0x0004400b + +struct bcm2835_mbox_tag_test_palette { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + u32 offset; + u32 num_entries; + u32 data[256]; + } req; + struct { + u32 is_invalid; + } resp; + } body; +}; + +#define BCM2835_MBOX_TAG_SET_PALETTE 0x0004800b + +struct bcm2835_mbox_tag_set_palette { + struct bcm2835_mbox_tag_hdr tag_hdr; + union { + struct { + u32 offset; + u32 num_entries; + u32 data[256]; + } req; + struct { + u32 is_invalid; + } resp; + } body; +}; + +/* + * Pass a raw u32 message to the VC, and receive a raw u32 back. + * + * Returns 0 for success, any other value for error. + */ +int bcm2835_mbox_call_raw(u32 chan, u32 send, u32 *recv); + +/* + * Pass a complete property-style buffer to the VC, and wait until it has + * been processed. + * + * This function expects a pointer to the mbox_hdr structure in an attempt + * to ensure some degree of type safety. However, some number of tags and + * a termination value are expected to immediately follow the header in + * memory, as required by the property protocol. + * + * Returns 0 for success, any other value for error. + */ +int bcm2835_mbox_call_prop(u32 chan, struct bcm2835_mbox_hdr *buffer); + +#endif diff --git a/arch/arm/include/asm/arch-bcm2835/sdhci.h b/arch/arm/include/asm/arch-bcm2835/sdhci.h new file mode 100644 index 0000000000..a4f867b2e9 --- /dev/null +++ b/arch/arm/include/asm/arch-bcm2835/sdhci.h @@ -0,0 +1,24 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BCM2835_SDHCI_H_ +#define _BCM2835_SDHCI_H_ + +#define BCM2835_SDHCI_BASE 0x20300000 + +int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq); + +#endif diff --git a/arch/arm/include/asm/arch-davinci/gpio.h b/arch/arm/include/asm/arch-davinci/gpio.h index ef65ffbb9f..06390c85e1 100644 --- a/arch/arm/include/asm/arch-davinci/gpio.h +++ b/arch/arm/include/asm/arch-davinci/gpio.h @@ -67,7 +67,14 @@ struct davinci_gpio_bank { #define gpio_status() gpio_info() #define GPIO_NAME_SIZE 20 +#if defined(CONFIG_SOC_DM644X) +/* GPIO0 to GPIO53, omit the V3.3 volts one */ +#define MAX_NUM_GPIOS 70 +#elif defined(CONFIG_SOC_DA8XX) && !defined(CONFIG_SOC_DA850) +#define MAX_NUM_GPIOS 128 +#else #define MAX_NUM_GPIOS 144 +#endif #define GPIO_BANK(gp) (davinci_gpio_bank01 + ((gp) >> 5)) #define GPIO_BIT(gp) ((gp) & 0x1F) diff --git a/arch/arm/include/asm/arch-mx35/spl.h b/arch/arm/include/asm/arch-mx35/spl.h index 91d11ae847..3ca4c94680 100644 --- a/arch/arm/include/asm/arch-mx35/spl.h +++ b/arch/arm/include/asm/arch-mx35/spl.h @@ -27,7 +27,7 @@ #define BOOT_DEVICE_XIP 1 #define BOOT_DEVICE_XIPWAIT 2 #define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_ONE_NAND 4 +#define BOOT_DEVICE_ONENAND 4 #define BOOT_DEVICE_MMC1 5 #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 7 diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h index d670f30c02..76764571a7 100644 --- a/arch/arm/include/asm/arch-mx6/crm_regs.h +++ b/arch/arm/include/asm/arch-mx6/crm_regs.h @@ -20,6 +20,17 @@ #ifndef __ARCH_ARM_MACH_MX6_CCM_REGS_H__ #define __ARCH_ARM_MACH_MX6_CCM_REGS_H__ +#define CCM_CCGR0 0x020C4068 +#define CCM_CCGR1 0x020C406c +#define CCM_CCGR2 0x020C4070 +#define CCM_CCGR3 0x020C4074 +#define CCM_CCGR4 0x020C4078 +#define CCM_CCGR5 0x020C407c +#define CCM_CCGR6 0x020C4080 + +#define PMU_MISC2 0x020C8170 + +#ifndef __ASSEMBLY__ struct mxc_ccm_reg { u32 ccr; /* 0x0000 */ u32 ccdr; @@ -105,6 +116,7 @@ struct mxc_ccm_reg { u32 analog_pfd_528_clr; u32 analog_pfd_528_tog; }; +#endif /* Define the bits in register CCR */ #define MXC_CCM_CCR_RBC_EN (1 << 27) diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 3eb0081ca8..eaa7439486 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -601,5 +601,13 @@ struct iomuxc_base_regs { u32 daisy[104]; /* 0x7b0..94c */ }; +struct wdog_regs { + u16 wcr; /* Control */ + u16 wsr; /* Service */ + u16 wrsr; /* Reset Status */ + u16 wicr; /* Interrupt Control */ + u16 wmcr; /* Miscellaneous Control */ +}; + #endif /* __ASSEMBLER__*/ #endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h index d23abd764a..d67f600068 100644 --- a/arch/arm/include/asm/arch-mx6/iomux.h +++ b/arch/arm/include/asm/arch-mx6/iomux.h @@ -16,6 +16,11 @@ #ifndef __ASM_ARCH_IOMUX_H__ #define __ASM_ARCH_IOMUX_H__ + +#define MX6_IOMUXC_GPR4 0x020e0010 +#define MX6_IOMUXC_GPR6 0x020e0018 +#define MX6_IOMUXC_GPR7 0x020e001c + /* * IOMUXC_GPR13 bit fields */ diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h new file mode 100644 index 0000000000..1fdc1d48b3 --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2013 Boundary Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef __ASM_ARCH_MX6_DDR_H__ +#define __ASM_ARCH_MX6_DDR_H__ + +#ifdef CONFIG_MX6Q +#include "mx6q-ddr.h" +#else +#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) +#include "mx6dl-ddr.h" +#else +#error "Please select cpu" +#endif /* CONFIG_MX6DL or CONFIG_MX6S */ +#endif /* CONFIG_MX6Q */ + +#define MX6_MMDC_P0_MDCTL 0x021b0000 +#define MX6_MMDC_P0_MDPDC 0x021b0004 +#define MX6_MMDC_P0_MDOTC 0x021b0008 +#define MX6_MMDC_P0_MDCFG0 0x021b000c +#define MX6_MMDC_P0_MDCFG1 0x021b0010 +#define MX6_MMDC_P0_MDCFG2 0x021b0014 +#define MX6_MMDC_P0_MDMISC 0x021b0018 +#define MX6_MMDC_P0_MDSCR 0x021b001c +#define MX6_MMDC_P0_MDREF 0x021b0020 +#define MX6_MMDC_P0_MDRWD 0x021b002c +#define MX6_MMDC_P0_MDOR 0x021b0030 +#define MX6_MMDC_P0_MDASP 0x021b0040 +#define MX6_MMDC_P0_MAPSR 0x021b0404 +#define MX6_MMDC_P0_MPZQHWCTRL 0x021b0800 +#define MX6_MMDC_P0_MPWLDECTRL0 0x021b080c +#define MX6_MMDC_P0_MPWLDECTRL1 0x021b0810 +#define MX6_MMDC_P0_MPODTCTRL 0x021b0818 +#define MX6_MMDC_P0_MPRDDQBY0DL 0x021b081c +#define MX6_MMDC_P0_MPRDDQBY1DL 0x021b0820 +#define MX6_MMDC_P0_MPRDDQBY2DL 0x021b0824 +#define MX6_MMDC_P0_MPRDDQBY3DL 0x021b0828 +#define MX6_MMDC_P0_MPDGCTRL0 0x021b083c +#define MX6_MMDC_P0_MPDGCTRL1 0x021b0840 +#define MX6_MMDC_P0_MPRDDLCTL 0x021b0848 +#define MX6_MMDC_P0_MPWRDLCTL 0x021b0850 +#define MX6_MMDC_P0_MPMUR0 0x021b08b8 + +#define MX6_MMDC_P1_MDCTL 0x021b4000 +#define MX6_MMDC_P1_MDPDC 0x021b4004 +#define MX6_MMDC_P1_MDOTC 0x021b4008 +#define MX6_MMDC_P1_MDCFG0 0x021b400c +#define MX6_MMDC_P1_MDCFG1 0x021b4010 +#define MX6_MMDC_P1_MDCFG2 0x021b4014 +#define MX6_MMDC_P1_MDMISC 0x021b4018 +#define MX6_MMDC_P1_MDSCR 0x021b401c +#define MX6_MMDC_P1_MDREF 0x021b4020 +#define MX6_MMDC_P1_MDRWD 0x021b402c +#define MX6_MMDC_P1_MDOR 0x021b4030 +#define MX6_MMDC_P1_MDASP 0x021b4040 +#define MX6_MMDC_P1_MAPSR 0x021b4404 +#define MX6_MMDC_P1_MPZQHWCTRL 0x021b4800 +#define MX6_MMDC_P1_MPWLDECTRL0 0x021b480c +#define MX6_MMDC_P1_MPWLDECTRL1 0x021b4810 +#define MX6_MMDC_P1_MPODTCTRL 0x021b4818 +#define MX6_MMDC_P1_MPRDDQBY0DL 0x021b481c +#define MX6_MMDC_P1_MPRDDQBY1DL 0x021b4820 +#define MX6_MMDC_P1_MPRDDQBY2DL 0x021b4824 +#define MX6_MMDC_P1_MPRDDQBY3DL 0x021b4828 +#define MX6_MMDC_P1_MPDGCTRL0 0x021b483c +#define MX6_MMDC_P1_MPDGCTRL1 0x021b4840 +#define MX6_MMDC_P1_MPRDDLCTL 0x021b4848 +#define MX6_MMDC_P1_MPWRDLCTL 0x021b4850 +#define MX6_MMDC_P1_MPMUR0 0x021b48b8 + +#endif /*__ASM_ARCH_MX6_DDR_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mx6-pins.h b/arch/arm/include/asm/arch-mx6/mx6-pins.h new file mode 100644 index 0000000000..63f485666a --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6-pins.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2013 Boundary Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef __ASM_ARCH_MX6_PINS_H__ +#define __ASM_ARCH_MX6_PINS_H__ + +#ifdef CONFIG_MX6Q +#include "mx6q_pins.h" +#else +#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S) +#include "mx6dl_pins.h" +#else +#error "Please select cpu" +#endif /* CONFIG_MX6DL or CONFIG_MX6S */ +#endif /* CONFIG_MX6Q */ + +#endif /*__ASM_ARCH_MX6_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h b/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h new file mode 100644 index 0000000000..325da3314a --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6dl-ddr.h @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2013 Boundary Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef __ASM_ARCH_MX6DLS_DDR_H__ +#define __ASM_ARCH_MX6DLS_DDR_H__ + +#ifndef CONFIG_MX6DL +#ifndef CONFIG_MX6S +#error "wrong CPU" +#endif +#endif + +#define MX6_IOM_DRAM_DQM0 0x020e0470 +#define MX6_IOM_DRAM_DQM1 0x020e0474 +#define MX6_IOM_DRAM_DQM2 0x020e0478 +#define MX6_IOM_DRAM_DQM3 0x020e047c +#define MX6_IOM_DRAM_DQM4 0x020e0480 +#define MX6_IOM_DRAM_DQM5 0x020e0484 +#define MX6_IOM_DRAM_DQM6 0x020e0488 +#define MX6_IOM_DRAM_DQM7 0x020e048c + +#define MX6_IOM_DRAM_CAS 0x020e0464 +#define MX6_IOM_DRAM_RAS 0x020e0490 +#define MX6_IOM_DRAM_RESET 0x020e0494 +#define MX6_IOM_DRAM_SDCLK_0 0x020e04ac +#define MX6_IOM_DRAM_SDCLK_1 0x020e04b0 +#define MX6_IOM_DRAM_SDBA2 0x020e04a0 +#define MX6_IOM_DRAM_SDCKE0 0x020e04a4 +#define MX6_IOM_DRAM_SDCKE1 0x020e04a8 +#define MX6_IOM_DRAM_SDODT0 0x020e04b4 +#define MX6_IOM_DRAM_SDODT1 0x020e04b8 + +#define MX6_IOM_DRAM_SDQS0 0x020e04bc +#define MX6_IOM_DRAM_SDQS1 0x020e04c0 +#define MX6_IOM_DRAM_SDQS2 0x020e04c4 +#define MX6_IOM_DRAM_SDQS3 0x020e04c8 +#define MX6_IOM_DRAM_SDQS4 0x020e04cc +#define MX6_IOM_DRAM_SDQS5 0x020e04d0 +#define MX6_IOM_DRAM_SDQS6 0x020e04d4 +#define MX6_IOM_DRAM_SDQS7 0x020e04d8 + +#define MX6_IOM_GRP_B0DS 0x020e0764 +#define MX6_IOM_GRP_B1DS 0x020e0770 +#define MX6_IOM_GRP_B2DS 0x020e0778 +#define MX6_IOM_GRP_B3DS 0x020e077c +#define MX6_IOM_GRP_B4DS 0x020e0780 +#define MX6_IOM_GRP_B5DS 0x020e0784 +#define MX6_IOM_GRP_B6DS 0x020e078c +#define MX6_IOM_GRP_B7DS 0x020e0748 +#define MX6_IOM_GRP_ADDDS 0x020e074c +#define MX6_IOM_DDRMODE_CTL 0x020e0750 +#define MX6_IOM_GRP_DDRPKE 0x020e0754 +#define MX6_IOM_GRP_DDRMODE 0x020e0760 +#define MX6_IOM_GRP_CTLDS 0x020e076c +#define MX6_IOM_GRP_DDR_TYPE 0x020e0774 + +#endif /*__ASM_ARCH_MX6S_DDR_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h index 79e2c4f5a4..9494e4126a 100644 --- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h @@ -50,100 +50,103 @@ #define NO_MUX_I 0 #define NO_PAD_I 0 enum { - MX6DL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6DL_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x0514, 0x0144, 1, 0x07D8, 2, 0), - MX6DL_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x0518, 0x0148, 1, 0x07DC, 2, 0), - MX6DL_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x051C, 0x014C, 1, 0x07E0, 2, 0), - MX6DL_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x0520, 0x0150, 5, 0x0000, 0, 0), - MX6DL_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x0528, 0x0158, 5, 0x0000, 0, 0), - MX6DL_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x0528, 0x0158, 6 | IOMUX_CONFIG_SION, 0x0868, 1, 0), - MX6DL_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x0530, 0x0160, 5, 0x0000, 0, 0), - MX6DL_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x053C, 0x016C, 4, 0x0000, 0, 0), - MX6DL_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x0540, 0x0170, 4, 0x0904, 1, 0), - MX6DL_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0), - MX6DL_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0), - MX6DL_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0, 0), - MX6DL_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0), - MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0), - MX6DL_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0), - MX6DL_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0), - MX6DL_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x05E4, 0x0214, 6 | IOMUX_CONFIG_SION, 0x087C, 1, 0), - MX6DL_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0), - MX6DL_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0), - MX6DL_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0), - MX6DL_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0), - MX6DL_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x0600, 0x0230, 6 | IOMUX_CONFIG_SION, 0x0878, 2, 0), - MX6DL_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x0638, 0x0250, 4 | IOMUX_CONFIG_SION, 0x0870, 1, 0), - MX6DL_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x0638, 0x0250, 5, 0x0000, 0, 0), - MX6DL_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x064C, 0x0264, 4 | IOMUX_CONFIG_SION, 0x0874, 1, 0), - MX6DL_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x064C, 0x0264, 5, 0x0000, 0, 0), - MX6DL_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x0670, 0x0288, 5, 0x0000, 0, 0), - MX6DL_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x0674, 0x028C, 5, 0x0000, 0, 0), - MX6DL_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x0678, 0x0290, 5, 0x0000, 0, 0), - MX6DL_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x067C, 0x0294, 5, 0x0000, 0, 0), - MX6DL_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x0684, 0x029C, 5, 0x0000, 0, 0), - MX6DL_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0818, 1, 0), - MX6DL_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0), - MX6DL_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x0698, 0x02B0, 1, 0x081C, 1, 0), - MX6DL_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0), - MX6DL_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0820, 1, 0), - MX6DL_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0), - MX6DL_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0824, 1, 0), - MX6DL_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0), - MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0828, 1, 0), - MX6DL_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0), - MX6DL_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x0814, 1, 0), - MX6DL_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0), - MX6DL_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0), - MX6DL_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x06B0, 0x02C8, 1, 0x0000, 0, 0), - MX6DL_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x0000, 0, 0), - MX6DL_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0), - MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0), - MX6DL_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0), - MX6DL_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0), - MX6DL_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0), - MX6DL_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0934, 1, 0), - MX6DL_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06F8, 0x0310, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0), - MX6DL_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0), - MX6DL_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0), - MX6DL_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0), - MX6DL_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0), - MX6DL_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0), - MX6DL_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0714, 0x032C, 1, 0x08FC, 2, 0), - MX6DL_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0), - MX6DL_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x0720, 0x0338, 0, 0x0938, 1, 0), - MX6DL_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x0724, 0x033C, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0), - MX6DL_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0728, 0x0340, 1, 0x0000, 0, 0), - MX6DL_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0), - MX6DL_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x0730, 0x0348, 1, 0x0000, 0, 0), - MX6DL_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0000, 0, 0), + MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x0514, 0x0144, 1, 0x07D8, 2, 0), + MX6_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x0518, 0x0148, 1, 0x07DC, 2, 0), + MX6_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x051C, 0x014C, 1, 0x07E0, 2, 0), + MX6_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x0520, 0x0150, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x0528, 0x0158, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x0528, 0x0158, 6 | IOMUX_CONFIG_SION, 0x0868, 1, 0), + MX6_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x0530, 0x0160, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x053C, 0x016C, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x0540, 0x0170, 4, 0x0904, 1, 0), + MX6_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0), + MX6_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0), + MX6_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0, 0), + MX6_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0), + MX6_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x05E4, 0x0214, 6 | IOMUX_CONFIG_SION, 0x087C, 1, 0), + MX6_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x0600, 0x0230, 6 | IOMUX_CONFIG_SION, 0x0878, 2, 0), + MX6_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x0638, 0x0250, 4 | IOMUX_CONFIG_SION, 0x0870, 1, 0), + MX6_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x0638, 0x0250, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x064C, 0x0264, 4 | IOMUX_CONFIG_SION, 0x0874, 1, 0), + MX6_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x064C, 0x0264, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CS1__GPIO_6_14 = IOMUX_PAD(0x0660, 0x0278, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CS2__GPIO_6_15 = IOMUX_PAD(0x0664, 0x027C, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__GPIO_6_16 = IOMUX_PAD(0x0668, 0x0280, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x0670, 0x0288, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x0674, 0x028C, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x0678, 0x0290, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x067C, 0x0294, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x0684, 0x029C, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0818, 1, 0), + MX6_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x0698, 0x02B0, 1, 0x081C, 1, 0), + MX6_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0820, 1, 0), + MX6_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0824, 1, 0), + MX6_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0828, 1, 0), + MX6_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x0814, 1, 0), + MX6_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x06B0, 0x02C8, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0934, 1, 0), + MX6_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06F8, 0x0310, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0714, 0x032C, 1, 0x08FC, 2, 0), + MX6_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x0720, 0x0338, 0, 0x0938, 1, 0), + MX6_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x0724, 0x033C, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0728, 0x0340, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x0730, 0x0348, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0000, 0, 0), }; #endif /* __ASM_ARCH_MX6_MX6DL_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mx6q-ddr.h b/arch/arm/include/asm/arch-mx6/mx6q-ddr.h new file mode 100644 index 0000000000..e51727c389 --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6q-ddr.h @@ -0,0 +1,69 @@ +/* + * Copyright (C) 2013 Boundary Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef __ASM_ARCH_MX6Q_DDR_H__ +#define __ASM_ARCH_MX6Q_DDR_H__ + +#ifndef CONFIG_MX6Q +#error "wrong CPU" +#endif + +#define MX6_IOM_DRAM_DQM0 0x020e05ac +#define MX6_IOM_DRAM_DQM1 0x020e05b4 +#define MX6_IOM_DRAM_DQM2 0x020e0528 +#define MX6_IOM_DRAM_DQM3 0x020e0520 +#define MX6_IOM_DRAM_DQM4 0x020e0514 +#define MX6_IOM_DRAM_DQM5 0x020e0510 +#define MX6_IOM_DRAM_DQM6 0x020e05bc +#define MX6_IOM_DRAM_DQM7 0x020e05c4 + +#define MX6_IOM_DRAM_CAS 0x020e056c +#define MX6_IOM_DRAM_RAS 0x020e0578 +#define MX6_IOM_DRAM_RESET 0x020e057c +#define MX6_IOM_DRAM_SDCLK_0 0x020e0588 +#define MX6_IOM_DRAM_SDCLK_1 0x020e0594 +#define MX6_IOM_DRAM_SDBA2 0x020e058c +#define MX6_IOM_DRAM_SDCKE0 0x020e0590 +#define MX6_IOM_DRAM_SDCKE1 0x020e0598 +#define MX6_IOM_DRAM_SDODT0 0x020e059c +#define MX6_IOM_DRAM_SDODT1 0x020e05a0 + +#define MX6_IOM_DRAM_SDQS0 0x020e05a8 +#define MX6_IOM_DRAM_SDQS1 0x020e05b0 +#define MX6_IOM_DRAM_SDQS2 0x020e0524 +#define MX6_IOM_DRAM_SDQS3 0x020e051c +#define MX6_IOM_DRAM_SDQS4 0x020e0518 +#define MX6_IOM_DRAM_SDQS5 0x020e050c +#define MX6_IOM_DRAM_SDQS6 0x020e05b8 +#define MX6_IOM_DRAM_SDQS7 0x020e05c0 + +#define MX6_IOM_GRP_B0DS 0x020e0784 +#define MX6_IOM_GRP_B1DS 0x020e0788 +#define MX6_IOM_GRP_B2DS 0x020e0794 +#define MX6_IOM_GRP_B3DS 0x020e079c +#define MX6_IOM_GRP_B4DS 0x020e07a0 +#define MX6_IOM_GRP_B5DS 0x020e07a4 +#define MX6_IOM_GRP_B6DS 0x020e07a8 +#define MX6_IOM_GRP_B7DS 0x020e0748 +#define MX6_IOM_GRP_ADDDS 0x020e074c +#define MX6_IOM_DDRMODE_CTL 0x020e0750 +#define MX6_IOM_GRP_DDRPKE 0x020e0758 +#define MX6_IOM_GRP_DDRMODE 0x020e0774 +#define MX6_IOM_GRP_CTLDS 0x020e078c +#define MX6_IOM_GRP_DDR_TYPE 0x020e0798 + +#endif /*__ASM_ARCH_MX6Q_DDR_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h new file mode 100644 index 0000000000..1c1c00855f --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h @@ -0,0 +1,1671 @@ +/* + * Copyright (C) 2011-2013 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + * Auto Generate file, please don't edit it + * + */ + +#ifndef __ASM_ARCH_MX6_MX6Q_PINS_H__ +#define __ASM_ARCH_MX6_MX6Q_PINS_H__ + +#include <asm/imx-common/iomux-v3.h> + +/* Use to set PAD control */ +#define PAD_CTL_HYS (1 << 16) +#define PAD_CTL_PUS_100K_DOWN (0 << 14) +#define PAD_CTL_PUS_47K_UP (1 << 14) +#define PAD_CTL_PUS_100K_UP (2 << 14) +#define PAD_CTL_PUS_22K_UP (3 << 14) + +#define PAD_CTL_PUE (1 << 13) +#define PAD_CTL_PKE (1 << 12) +#define PAD_CTL_ODE (1 << 11) +#define PAD_CTL_SPEED_LOW (1 << 6) +#define PAD_CTL_SPEED_MED (2 << 6) +#define PAD_CTL_SPEED_HIGH (3 << 6) +#define PAD_CTL_DSE_DISABLE (0 << 3) +#define PAD_CTL_DSE_240ohm (1 << 3) +#define PAD_CTL_DSE_120ohm (2 << 3) +#define PAD_CTL_DSE_80ohm (3 << 3) +#define PAD_CTL_DSE_60ohm (4 << 3) +#define PAD_CTL_DSE_48ohm (5 << 3) +#define PAD_CTL_DSE_40ohm (6 << 3) +#define PAD_CTL_DSE_34ohm (7 << 3) +#define PAD_CTL_SRE_FAST (1 << 0) +#define PAD_CTL_SRE_SLOW (0 << 0) + +#define NO_MUX_I 0 +#define NO_PAD_I 0 + +enum { + MX6_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0), + MX6_PAD_SD2_DAT1__WEIM_WEIM_CS_2 = IOMUX_PAD(0x0360, 0x004C, 2, 0x0000, 0, 0), + MX6_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x0360, 0x004C, 3, 0x07C8, 0, 0), + MX6_PAD_SD2_DAT1__KPP_COL_7 = IOMUX_PAD(0x0360, 0x004C, 4, 0x08F0, 0, 0), + MX6_PAD_SD2_DAT1__GPIO_1_14 = IOMUX_PAD(0x0360, 0x004C, 5, 0x0000, 0, 0), + MX6_PAD_SD2_DAT1__CCM_WAIT = IOMUX_PAD(0x0360, 0x004C, 6, 0x0000, 0, 0), + MX6_PAD_SD2_DAT1__ANATOP_TESTO_0 = IOMUX_PAD(0x0360, 0x004C, 7, 0x0000, 0, 0), + MX6_PAD_SD2_DAT2__USDHC2_DAT2 = IOMUX_PAD(0x0364, 0x0050, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT2__ECSPI5_SS1 = IOMUX_PAD(0x0364, 0x0050, 1, 0x0838, 0, 0), + MX6_PAD_SD2_DAT2__WEIM_WEIM_CS_3 = IOMUX_PAD(0x0364, 0x0050, 2, 0x0000, 0, 0), + MX6_PAD_SD2_DAT2__AUDMUX_AUD4_TXD = IOMUX_PAD(0x0364, 0x0050, 3, 0x07B8, 0, 0), + MX6_PAD_SD2_DAT2__KPP_ROW_6 = IOMUX_PAD(0x0364, 0x0050, 4, 0x08F8, 0, 0), + MX6_PAD_SD2_DAT2__GPIO_1_13 = IOMUX_PAD(0x0364, 0x0050, 5, 0x0000, 0, 0), + MX6_PAD_SD2_DAT2__CCM_STOP = IOMUX_PAD(0x0364, 0x0050, 6, 0x0000, 0, 0), + MX6_PAD_SD2_DAT2__ANATOP_TESTO_1 = IOMUX_PAD(0x0364, 0x0050, 7, 0x0000, 0, 0), + MX6_PAD_SD2_DAT0__USDHC2_DAT0 = IOMUX_PAD(0x0368, 0x0054, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT0__ECSPI5_MISO = IOMUX_PAD(0x0368, 0x0054, 1, 0x082C, 0, 0), + MX6_PAD_SD2_DAT0__AUDMUX_AUD4_RXD = IOMUX_PAD(0x0368, 0x0054, 3, 0x07B4, 0, 0), + MX6_PAD_SD2_DAT0__KPP_ROW_7 = IOMUX_PAD(0x0368, 0x0054, 4, 0x08FC, 0, 0), + MX6_PAD_SD2_DAT0__GPIO_1_15 = IOMUX_PAD(0x0368, 0x0054, 5, 0x0000, 0, 0), + MX6_PAD_SD2_DAT0__DCIC2_DCIC_OUT = IOMUX_PAD(0x0368, 0x0054, 6, 0x0000, 0, 0), + MX6_PAD_SD2_DAT0__TESTO_2 = IOMUX_PAD(0x0368, 0x0054, 7, 0x0000, 0, 0), + MX6_PAD_RGMII_TXC__USBOH3_H2_DATA = IOMUX_PAD(0x036C, 0x0058, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x036C, 0x0058, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x036C, 0x0058, 2, 0x0918, 0, 0), + MX6_PAD_RGMII_TXC__GPIO_6_19 = IOMUX_PAD(0x036C, 0x0058, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_TXC__MIPI_CORE_DPHY_IN_0 = IOMUX_PAD(0x036C, 0x0058, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_TXC__ANATOP_24M_OUT = IOMUX_PAD(0x036C, 0x0058, 7, 0x0000, 0, 0), + MX6_PAD_RGMII_TD0__MIPI_HSI_CRL_TX_RDY = IOMUX_PAD(0x0370, 0x005C, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x0370, 0x005C, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TD0__GPIO_6_20 = IOMUX_PAD(0x0370, 0x005C, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_TD0__MIPI_CORE_DPHY_IN_1 = IOMUX_PAD(0x0370, 0x005C, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_TD1__MIPI_HSI_CRL_RX_FLG = IOMUX_PAD(0x0374, 0x0060, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x0374, 0x0060, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TD1__GPIO_6_21 = IOMUX_PAD(0x0374, 0x0060, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_TD1__MIPI_CORE_DPHY_IN_2 = IOMUX_PAD(0x0374, 0x0060, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_TD1__CCM_PLL3_BYP = IOMUX_PAD(0x0374, 0x0060, 7, 0x0000, 0, 0), + MX6_PAD_RGMII_TD2__MIPI_HSI_CRL_RX_DTA = IOMUX_PAD(0x0378, 0x0064, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x0378, 0x0064, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TD2__GPIO_6_22 = IOMUX_PAD(0x0378, 0x0064, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_TD2__MIPI_CORE_DPHY_IN_3 = IOMUX_PAD(0x0378, 0x0064, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_TD2__CCM_PLL2_BYP = IOMUX_PAD(0x0378, 0x0064, 7, 0x0000, 0, 0), + MX6_PAD_RGMII_TD3__MIPI_HSI_CRL_RX_WAK = IOMUX_PAD(0x037C, 0x0068, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x037C, 0x0068, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TD3__GPIO_6_23 = IOMUX_PAD(0x037C, 0x0068, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_TD3__MIPI_CORE_DPHY_IN_4 = IOMUX_PAD(0x037C, 0x0068, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_RX_CTL__USBOH3_H3_DATA = IOMUX_PAD(0x0380, 0x006C, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x0380, 0x006C, 1, 0x0858, 0, 0), + MX6_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x0380, 0x006C, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RX_CTL__MIPI_DPHY_IN_5 = IOMUX_PAD(0x0380, 0x006C, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_RD0__MIPI_HSI_CRL_RX_RDY = IOMUX_PAD(0x0384, 0x0070, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0384, 0x0070, 1, 0x0848, 0, 0), + MX6_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0384, 0x0070, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD0__MIPI_CORE_DPHY_IN_6 = IOMUX_PAD(0x0384, 0x0070, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE = IOMUX_PAD(0x0388, 0x0074, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x0388, 0x0074, 1, 0x0000, 0, 0), + MX6_PAD_RGMII_TX_CTL__GPIO_6_26 = IOMUX_PAD(0x0388, 0x0074, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_TX_CTL__CORE_DPHY_IN_7 = IOMUX_PAD(0x0388, 0x0074, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_TX_CTL__ANATOP_REF_OUT = IOMUX_PAD(0x0388, 0x0074, 7, 0x083C, 0, 0), + MX6_PAD_RGMII_RD1__MIPI_HSI_CTRL_TX_FL = IOMUX_PAD(0x038C, 0x0078, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x038C, 0x0078, 1, 0x084C, 0, 0), + MX6_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x038C, 0x0078, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD1__CORE_DPHY_TEST_IN_8 = IOMUX_PAD(0x038C, 0x0078, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_RD1__SJC_FAIL = IOMUX_PAD(0x038C, 0x0078, 7, 0x0000, 0, 0), + MX6_PAD_RGMII_RD2__MIPI_HSI_CRL_TX_DTA = IOMUX_PAD(0x0390, 0x007C, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x0390, 0x007C, 1, 0x0850, 0, 0), + MX6_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x0390, 0x007C, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD2__MIPI_CORE_DPHY_IN_9 = IOMUX_PAD(0x0390, 0x007C, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_RD3__MIPI_HSI_CRL_TX_WAK = IOMUX_PAD(0x0394, 0x0080, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x0394, 0x0080, 1, 0x0854, 0, 0), + MX6_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x0394, 0x0080, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RD3__MIPI_CORE_DPHY_IN10 = IOMUX_PAD(0x0394, 0x0080, 6, 0x0000, 0, 0), + MX6_PAD_RGMII_RXC__USBOH3_H3_STROBE = IOMUX_PAD(0x0398, 0x0084, 0, 0x0000, 0, 0), + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x0398, 0x0084, 1, 0x0844, 0, 0), + MX6_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x0398, 0x0084, 5, 0x0000, 0, 0), + MX6_PAD_RGMII_RXC__MIPI_CORE_DPHY_IN11 = IOMUX_PAD(0x0398, 0x0084, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A25__WEIM_WEIM_A_25 = IOMUX_PAD(0x039C, 0x0088, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A25__ECSPI4_SS1 = IOMUX_PAD(0x039C, 0x0088, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A25__ECSPI2_RDY = IOMUX_PAD(0x039C, 0x0088, 2, 0x0000, 0, 0), + MX6_PAD_EIM_A25__IPU1_DI1_PIN12 = IOMUX_PAD(0x039C, 0x0088, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A25__IPU1_DI0_D1_CS = IOMUX_PAD(0x039C, 0x0088, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A25__GPIO_5_2 = IOMUX_PAD(0x039C, 0x0088, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A25__HDMI_TX_CEC_LINE = IOMUX_PAD(0x039C, 0x0088, 6, 0x088C, 0, 0), + MX6_PAD_EIM_A25__PL301_PER1_HBURST_0 = IOMUX_PAD(0x039C, 0x0088, 7, 0x0000, 0, 0), + MX6_PAD_EIM_EB2__WEIM_WEIM_EB_2 = IOMUX_PAD(0x03A0, 0x008C, 0, 0x0000, 0, 0), + MX6_PAD_EIM_EB2__ECSPI1_SS0 = IOMUX_PAD(0x03A0, 0x008C, 1, 0x0800, 0, 0), + MX6_PAD_EIM_EB2__CCM_DI1_EXT_CLK = IOMUX_PAD(0x03A0, 0x008C, 2, 0x07EC, 0, 0), + MX6_PAD_EIM_EB2__IPU2_CSI1_D_19 = IOMUX_PAD(0x03A0, 0x008C, 3, 0x08D4, 0, 0), + MX6_PAD_EIM_EB2__HDMI_TX_DDC_SCL = IOMUX_PAD(0x03A0, 0x008C, 4, 0x0890, 0, 0), + MX6_PAD_EIM_EB2__GPIO_2_30 = IOMUX_PAD(0x03A0, 0x008C, 5, 0x0000, 0, 0), + MX6_PAD_EIM_EB2__I2C2_SCL = IOMUX_PAD(0x03A0, 0x008C, 22, 0x08A0, 0, 0), + MX6_PAD_EIM_EB2__SRC_BT_CFG_30 = IOMUX_PAD(0x03A0, 0x008C, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D16__WEIM_WEIM_D_16 = IOMUX_PAD(0x03A4, 0x0090, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x03A4, 0x0090, 1, 0x07F4, 0, 0), + MX6_PAD_EIM_D16__IPU1_DI0_PIN5 = IOMUX_PAD(0x03A4, 0x0090, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D16__IPU2_CSI1_D_18 = IOMUX_PAD(0x03A4, 0x0090, 3, 0x08D0, 0, 0), + MX6_PAD_EIM_D16__HDMI_TX_DDC_SDA = IOMUX_PAD(0x03A4, 0x0090, 4, 0x0894, 0, 0), + MX6_PAD_EIM_D16__GPIO_3_16 = IOMUX_PAD(0x03A4, 0x0090, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D16__I2C2_SDA = IOMUX_PAD(0x03A4, 0x0090, 22, 0x08A4, 0, 0), + MX6_PAD_EIM_D17__WEIM_WEIM_D_17 = IOMUX_PAD(0x03A8, 0x0094, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x03A8, 0x0094, 1, 0x07F8, 0, 0), + MX6_PAD_EIM_D17__IPU1_DI0_PIN6 = IOMUX_PAD(0x03A8, 0x0094, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D17__IPU2_CSI1_PIXCLK = IOMUX_PAD(0x03A8, 0x0094, 3, 0x08E0, 0, 0), + MX6_PAD_EIM_D17__DCIC1_DCIC_OUT = IOMUX_PAD(0x03A8, 0x0094, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D17__GPIO_3_17 = IOMUX_PAD(0x03A8, 0x0094, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D17__I2C3_SCL = IOMUX_PAD(0x03A8, 0x0094, 22, 0x08A8, 0, 0), + MX6_PAD_EIM_D17__PL301_PER1_HBURST_1 = IOMUX_PAD(0x03A8, 0x0094, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D18__WEIM_WEIM_D_18 = IOMUX_PAD(0x03AC, 0x0098, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x03AC, 0x0098, 1, 0x07FC, 0, 0), + MX6_PAD_EIM_D18__IPU1_DI0_PIN7 = IOMUX_PAD(0x03AC, 0x0098, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D18__IPU2_CSI1_D_17 = IOMUX_PAD(0x03AC, 0x0098, 3, 0x08CC, 0, 0), + MX6_PAD_EIM_D18__IPU1_DI1_D0_CS = IOMUX_PAD(0x03AC, 0x0098, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D18__GPIO_3_18 = IOMUX_PAD(0x03AC, 0x0098, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D18__I2C3_SDA = IOMUX_PAD(0x03AC, 0x0098, 22, 0x08AC, 0, 0), + MX6_PAD_EIM_D18__PL301_PER1_HBURST_2 = IOMUX_PAD(0x03AC, 0x0098, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D19__WEIM_WEIM_D_19 = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D19__ECSPI1_SS1 = IOMUX_PAD(0x03B0, 0x009C, 1, 0x0804, 0, 0), + MX6_PAD_EIM_D19__IPU1_DI0_PIN8 = IOMUX_PAD(0x03B0, 0x009C, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D19__IPU2_CSI1_D_16 = IOMUX_PAD(0x03B0, 0x009C, 3, 0x08C8, 0, 0), + MX6_PAD_EIM_D19__UART1_CTS = IOMUX_PAD(0x03B0, 0x009C, 4, 0x091C, 0, 0), + MX6_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x03B0, 0x009C, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D19__EPIT1_EPITO = IOMUX_PAD(0x03B0, 0x009C, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D19__PL301MX6QPER1_HRESP = IOMUX_PAD(0x03B0, 0x009C, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D20__WEIM_WEIM_D_20 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D20__ECSPI4_SS0 = IOMUX_PAD(0x03B4, 0x00A0, 1, 0x0824, 0, 0), + MX6_PAD_EIM_D20__IPU1_DI0_PIN16 = IOMUX_PAD(0x03B4, 0x00A0, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D20__IPU2_CSI1_D_15 = IOMUX_PAD(0x03B4, 0x00A0, 3, 0x08C4, 0, 0), + MX6_PAD_EIM_D20__UART1_CTS = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D20__UART1_RTS = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x091C, 1, 0), + MX6_PAD_EIM_D20__GPIO_3_20 = IOMUX_PAD(0x03B4, 0x00A0, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D20__EPIT2_EPITO = IOMUX_PAD(0x03B4, 0x00A0, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D21__WEIM_WEIM_D_21 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D21__ECSPI4_SCLK = IOMUX_PAD(0x03B8, 0x00A4, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D21__IPU1_DI0_PIN17 = IOMUX_PAD(0x03B8, 0x00A4, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D21__IPU2_CSI1_D_11 = IOMUX_PAD(0x03B8, 0x00A4, 3, 0x08B4, 0, 0), + MX6_PAD_EIM_D21__USBOH3_USBOTG_OC = IOMUX_PAD(0x03B8, 0x00A4, 4, 0x0944, 0, 0), + MX6_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x03B8, 0x00A4, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x03B8, 0x00A4, 22, 0x0898, 0, 0), + MX6_PAD_EIM_D21__SPDIF_IN1 = IOMUX_PAD(0x03B8, 0x00A4, 7, 0x0914, 0, 0), + MX6_PAD_EIM_D22__WEIM_WEIM_D_22 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D22__ECSPI4_MISO = IOMUX_PAD(0x03BC, 0x00A8, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D22__IPU1_DI0_PIN1 = IOMUX_PAD(0x03BC, 0x00A8, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D22__IPU2_CSI1_D_10 = IOMUX_PAD(0x03BC, 0x00A8, 3, 0x08B0, 0, 0), + MX6_PAD_EIM_D22__USBOH3_USBOTG_PWR = IOMUX_PAD(0x03BC, 0x00A8, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D22__GPIO_3_22 = IOMUX_PAD(0x03BC, 0x00A8, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D22__SPDIF_OUT1 = IOMUX_PAD(0x03BC, 0x00A8, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D22__PL301MX6QPER1_HWRITE = IOMUX_PAD(0x03BC, 0x00A8, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D23__WEIM_WEIM_D_23 = IOMUX_PAD(0x03C0, 0x00AC, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D23__IPU1_DI0_D0_CS = IOMUX_PAD(0x03C0, 0x00AC, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D23__UART3_CTS = IOMUX_PAD(0x03C0, 0x00AC, 2, 0x092C, 0, 0), + MX6_PAD_EIM_D23__UART1_DCD = IOMUX_PAD(0x03C0, 0x00AC, 3, 0x0000, 0, 0), + MX6_PAD_EIM_D23__IPU2_CSI1_DATA_EN = IOMUX_PAD(0x03C0, 0x00AC, 4, 0x08D8, 0, 0), + MX6_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D23__IPU1_DI1_PIN2 = IOMUX_PAD(0x03C0, 0x00AC, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D23__IPU1_DI1_PIN14 = IOMUX_PAD(0x03C0, 0x00AC, 7, 0x0000, 0, 0), + MX6_PAD_EIM_EB3__WEIM_WEIM_EB_3 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, 0), + MX6_PAD_EIM_EB3__ECSPI4_RDY = IOMUX_PAD(0x03C4, 0x00B0, 1, 0x0000, 0, 0), + MX6_PAD_EIM_EB3__UART3_CTS = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x0000, 0, 0), + MX6_PAD_EIM_EB3__UART3_RTS = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x092C, 1, 0), + MX6_PAD_EIM_EB3__UART1_RI = IOMUX_PAD(0x03C4, 0x00B0, 3, 0x0000, 0, 0), + MX6_PAD_EIM_EB3__IPU2_CSI1_HSYNC = IOMUX_PAD(0x03C4, 0x00B0, 4, 0x08DC, 0, 0), + MX6_PAD_EIM_EB3__GPIO_2_31 = IOMUX_PAD(0x03C4, 0x00B0, 5, 0x0000, 0, 0), + MX6_PAD_EIM_EB3__IPU1_DI1_PIN3 = IOMUX_PAD(0x03C4, 0x00B0, 6, 0x0000, 0, 0), + MX6_PAD_EIM_EB3__SRC_BT_CFG_31 = IOMUX_PAD(0x03C4, 0x00B0, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D24__WEIM_WEIM_D_24 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D24__ECSPI4_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D24__UART3_TXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D24__UART3_TXD_RXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0930, 0, 0), + MX6_PAD_EIM_D24__ECSPI1_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 3, 0x0808, 0, 0), + MX6_PAD_EIM_D24__ECSPI2_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D24__GPIO_3_24 = IOMUX_PAD(0x03C8, 0x00B4, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D24__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x03C8, 0x00B4, 6, 0x07D8, 0, 0), + MX6_PAD_EIM_D24__UART1_DTR = IOMUX_PAD(0x03C8, 0x00B4, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D25__WEIM_WEIM_D_25 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D25__ECSPI4_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D25__UART3_RXD = IOMUX_PAD(0x03CC, 0x00B8, 2, 0x0930, 1, 0), + MX6_PAD_EIM_D25__ECSPI1_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 3, 0x080C, 0, 0), + MX6_PAD_EIM_D25__ECSPI2_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D25__GPIO_3_25 = IOMUX_PAD(0x03CC, 0x00B8, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D25__AUDMUX_AUD5_RXC = IOMUX_PAD(0x03CC, 0x00B8, 6, 0x07D4, 0, 0), + MX6_PAD_EIM_D25__UART1_DSR = IOMUX_PAD(0x03CC, 0x00B8, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D26__WEIM_WEIM_D_26 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D26__IPU1_DI1_PIN11 = IOMUX_PAD(0x03D0, 0x00BC, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D26__IPU1_CSI0_D_1 = IOMUX_PAD(0x03D0, 0x00BC, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D26__IPU2_CSI1_D_14 = IOMUX_PAD(0x03D0, 0x00BC, 3, 0x08C0, 0, 0), + MX6_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D26__UART2_TXD_RXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0928, 0, 0), + MX6_PAD_EIM_D26__GPIO_3_26 = IOMUX_PAD(0x03D0, 0x00BC, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D26__IPU1_SISG_2 = IOMUX_PAD(0x03D0, 0x00BC, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D26__IPU1_DISP1_DAT_22 = IOMUX_PAD(0x03D0, 0x00BC, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D27__WEIM_WEIM_D_27 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D27__IPU1_DI1_PIN13 = IOMUX_PAD(0x03D4, 0x00C0, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D27__IPU1_CSI0_D_0 = IOMUX_PAD(0x03D4, 0x00C0, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D27__IPU2_CSI1_D_13 = IOMUX_PAD(0x03D4, 0x00C0, 3, 0x08BC, 0, 0), + MX6_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x03D4, 0x00C0, 4, 0x0928, 1, 0), + MX6_PAD_EIM_D27__GPIO_3_27 = IOMUX_PAD(0x03D4, 0x00C0, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D27__IPU1_SISG_3 = IOMUX_PAD(0x03D4, 0x00C0, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D27__IPU1_DISP1_DAT_23 = IOMUX_PAD(0x03D4, 0x00C0, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D28__WEIM_WEIM_D_28 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x03D8, 0x00C4, 17, 0x089C, 0, 0), + MX6_PAD_EIM_D28__ECSPI4_MOSI = IOMUX_PAD(0x03D8, 0x00C4, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D28__IPU2_CSI1_D_12 = IOMUX_PAD(0x03D8, 0x00C4, 3, 0x08B8, 0, 0), + MX6_PAD_EIM_D28__UART2_CTS = IOMUX_PAD(0x03D8, 0x00C4, 4, 0x0924, 0, 0), + MX6_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x03D8, 0x00C4, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D28__IPU1_EXT_TRIG = IOMUX_PAD(0x03D8, 0x00C4, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D28__IPU1_DI0_PIN13 = IOMUX_PAD(0x03D8, 0x00C4, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D29__WEIM_WEIM_D_29 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D29__IPU1_DI1_PIN15 = IOMUX_PAD(0x03DC, 0x00C8, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D29__ECSPI4_SS0 = IOMUX_PAD(0x03DC, 0x00C8, 2, 0x0824, 1, 0), + MX6_PAD_EIM_D29__UART2_CTS = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D29__UART2_RTS = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0924, 1, 0), + MX6_PAD_EIM_D29__GPIO_3_29 = IOMUX_PAD(0x03DC, 0x00C8, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D29__IPU2_CSI1_VSYNC = IOMUX_PAD(0x03DC, 0x00C8, 6, 0x08E4, 0, 0), + MX6_PAD_EIM_D29__IPU1_DI0_PIN14 = IOMUX_PAD(0x03DC, 0x00C8, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D30__WEIM_WEIM_D_30 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D30__IPU1_DISP1_DAT_21 = IOMUX_PAD(0x03E0, 0x00CC, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D30__IPU1_DI0_PIN11 = IOMUX_PAD(0x03E0, 0x00CC, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D30__IPU1_CSI0_D_3 = IOMUX_PAD(0x03E0, 0x00CC, 3, 0x0000, 0, 0), + MX6_PAD_EIM_D30__UART3_CTS = IOMUX_PAD(0x03E0, 0x00CC, 4, 0x092C, 2, 0), + MX6_PAD_EIM_D30__GPIO_3_30 = IOMUX_PAD(0x03E0, 0x00CC, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D30__USBOH3_USBH1_OC = IOMUX_PAD(0x03E0, 0x00CC, 6, 0x0948, 0, 0), + MX6_PAD_EIM_D30__PL301MX6QPER1_HPROT_0 = IOMUX_PAD(0x03E0, 0x00CC, 7, 0x0000, 0, 0), + MX6_PAD_EIM_D31__WEIM_WEIM_D_31 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, 0), + MX6_PAD_EIM_D31__IPU1_DISP1_DAT_20 = IOMUX_PAD(0x03E4, 0x00D0, 1, 0x0000, 0, 0), + MX6_PAD_EIM_D31__IPU1_DI0_PIN12 = IOMUX_PAD(0x03E4, 0x00D0, 2, 0x0000, 0, 0), + MX6_PAD_EIM_D31__IPU1_CSI0_D_2 = IOMUX_PAD(0x03E4, 0x00D0, 3, 0x0000, 0, 0), + MX6_PAD_EIM_D31__UART3_CTS = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x0000, 0, 0), + MX6_PAD_EIM_D31__UART3_RTS = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x092C, 3, 0), + MX6_PAD_EIM_D31__GPIO_3_31 = IOMUX_PAD(0x03E4, 0x00D0, 5, 0x0000, 0, 0), + MX6_PAD_EIM_D31__USBOH3_USBH1_PWR = IOMUX_PAD(0x03E4, 0x00D0, 6, 0x0000, 0, 0), + MX6_PAD_EIM_D31__PL301MX6QPER1_HPROT_1 = IOMUX_PAD(0x03E4, 0x00D0, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A24__WEIM_WEIM_A_24 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A24__IPU1_DISP1_DAT_19 = IOMUX_PAD(0x03E8, 0x00D4, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A24__IPU2_CSI1_D_19 = IOMUX_PAD(0x03E8, 0x00D4, 2, 0x08D4, 1, 0), + MX6_PAD_EIM_A24__IPU2_SISG_2 = IOMUX_PAD(0x03E8, 0x00D4, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A24__IPU1_SISG_2 = IOMUX_PAD(0x03E8, 0x00D4, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A24__GPIO_5_4 = IOMUX_PAD(0x03E8, 0x00D4, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A24__PL301MX6QPER1_HPROT_2 = IOMUX_PAD(0x03E8, 0x00D4, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A24__SRC_BT_CFG_24 = IOMUX_PAD(0x03E8, 0x00D4, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A23__WEIM_WEIM_A_23 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A23__IPU1_DISP1_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A23__IPU2_CSI1_D_18 = IOMUX_PAD(0x03EC, 0x00D8, 2, 0x08D0, 1, 0), + MX6_PAD_EIM_A23__IPU2_SISG_3 = IOMUX_PAD(0x03EC, 0x00D8, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A23__IPU1_SISG_3 = IOMUX_PAD(0x03EC, 0x00D8, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A23__GPIO_6_6 = IOMUX_PAD(0x03EC, 0x00D8, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A23__PL301MX6QPER1_HPROT_3 = IOMUX_PAD(0x03EC, 0x00D8, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A23__SRC_BT_CFG_23 = IOMUX_PAD(0x03EC, 0x00D8, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A22__WEIM_WEIM_A_22 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A22__IPU1_DISP1_DAT_17 = IOMUX_PAD(0x03F0, 0x00DC, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A22__IPU2_CSI1_D_17 = IOMUX_PAD(0x03F0, 0x00DC, 2, 0x08CC, 1, 0), + MX6_PAD_EIM_A22__GPIO_2_16 = IOMUX_PAD(0x03F0, 0x00DC, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A22__TPSMP_HDATA_0 = IOMUX_PAD(0x03F0, 0x00DC, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A22__SRC_BT_CFG_22 = IOMUX_PAD(0x03F0, 0x00DC, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A21__WEIM_WEIM_A_21 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A21__IPU1_DISP1_DAT_16 = IOMUX_PAD(0x03F4, 0x00E0, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A21__IPU2_CSI1_D_16 = IOMUX_PAD(0x03F4, 0x00E0, 2, 0x08C8, 1, 0), + MX6_PAD_EIM_A21__RESERVED_RESERVED = IOMUX_PAD(0x03F4, 0x00E0, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A21__MIPI_CORE_DPHY_OUT_18 = IOMUX_PAD(0x03F4, 0x00E0, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A21__GPIO_2_17 = IOMUX_PAD(0x03F4, 0x00E0, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A21__TPSMP_HDATA_1 = IOMUX_PAD(0x03F4, 0x00E0, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A21__SRC_BT_CFG_21 = IOMUX_PAD(0x03F4, 0x00E0, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A20__WEIM_WEIM_A_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A20__IPU1_DISP1_DAT_15 = IOMUX_PAD(0x03F8, 0x00E4, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A20__IPU2_CSI1_D_15 = IOMUX_PAD(0x03F8, 0x00E4, 2, 0x08C4, 1, 0), + MX6_PAD_EIM_A20__RESERVED_RESERVED = IOMUX_PAD(0x03F8, 0x00E4, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A20__MIPI_CORE_DPHY_OUT_19 = IOMUX_PAD(0x03F8, 0x00E4, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A20__GPIO_2_18 = IOMUX_PAD(0x03F8, 0x00E4, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A20__TPSMP_HDATA_2 = IOMUX_PAD(0x03F8, 0x00E4, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A20__SRC_BT_CFG_20 = IOMUX_PAD(0x03F8, 0x00E4, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A19__WEIM_WEIM_A_19 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A19__IPU1_DISP1_DAT_14 = IOMUX_PAD(0x03FC, 0x00E8, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A19__IPU2_CSI1_D_14 = IOMUX_PAD(0x03FC, 0x00E8, 2, 0x08C0, 1, 0), + MX6_PAD_EIM_A19__RESERVED_RESERVED = IOMUX_PAD(0x03FC, 0x00E8, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A19__MIPI_CORE_DPHY_OUT_20 = IOMUX_PAD(0x03FC, 0x00E8, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A19__GPIO_2_19 = IOMUX_PAD(0x03FC, 0x00E8, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A19__TPSMP_HDATA_3 = IOMUX_PAD(0x03FC, 0x00E8, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A19__SRC_BT_CFG_19 = IOMUX_PAD(0x03FC, 0x00E8, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A18__WEIM_WEIM_A_18 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A18__IPU1_DISP1_DAT_13 = IOMUX_PAD(0x0400, 0x00EC, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A18__IPU2_CSI1_D_13 = IOMUX_PAD(0x0400, 0x00EC, 2, 0x08BC, 1, 0), + MX6_PAD_EIM_A18__RESERVED_RESERVED = IOMUX_PAD(0x0400, 0x00EC, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A18__MIPI_CORE_DPHY_OUT_21 = IOMUX_PAD(0x0400, 0x00EC, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A18__GPIO_2_20 = IOMUX_PAD(0x0400, 0x00EC, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A18__TPSMP_HDATA_4 = IOMUX_PAD(0x0400, 0x00EC, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A18__SRC_BT_CFG_18 = IOMUX_PAD(0x0400, 0x00EC, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A17__WEIM_WEIM_A_17 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A17__IPU1_DISP1_DAT_12 = IOMUX_PAD(0x0404, 0x00F0, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A17__IPU2_CSI1_D_12 = IOMUX_PAD(0x0404, 0x00F0, 2, 0x08B8, 1, 0), + MX6_PAD_EIM_A17__RESERVED_RESERVED = IOMUX_PAD(0x0404, 0x00F0, 3, 0x0000, 0, 0), + MX6_PAD_EIM_A17__MIPI_CORE_DPHY_OUT_22 = IOMUX_PAD(0x0404, 0x00F0, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A17__GPIO_2_21 = IOMUX_PAD(0x0404, 0x00F0, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A17__TPSMP_HDATA_5 = IOMUX_PAD(0x0404, 0x00F0, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A17__SRC_BT_CFG_17 = IOMUX_PAD(0x0404, 0x00F0, 7, 0x0000, 0, 0), + MX6_PAD_EIM_A16__WEIM_WEIM_A_16 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, 0), + MX6_PAD_EIM_A16__IPU1_DI1_DISP_CLK = IOMUX_PAD(0x0408, 0x00F4, 1, 0x0000, 0, 0), + MX6_PAD_EIM_A16__IPU2_CSI1_PIXCLK = IOMUX_PAD(0x0408, 0x00F4, 2, 0x08E0, 1, 0), + MX6_PAD_EIM_A16__MIPI_CORE_DPHY_OUT_23 = IOMUX_PAD(0x0408, 0x00F4, 4, 0x0000, 0, 0), + MX6_PAD_EIM_A16__GPIO_2_22 = IOMUX_PAD(0x0408, 0x00F4, 5, 0x0000, 0, 0), + MX6_PAD_EIM_A16__TPSMP_HDATA_6 = IOMUX_PAD(0x0408, 0x00F4, 6, 0x0000, 0, 0), + MX6_PAD_EIM_A16__SRC_BT_CFG_16 = IOMUX_PAD(0x0408, 0x00F4, 7, 0x0000, 0, 0), + MX6_PAD_EIM_CS0__WEIM_WEIM_CS_0 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, 0), + MX6_PAD_EIM_CS0__IPU1_DI1_PIN5 = IOMUX_PAD(0x040C, 0x00F8, 1, 0x0000, 0, 0), + MX6_PAD_EIM_CS0__ECSPI2_SCLK = IOMUX_PAD(0x040C, 0x00F8, 2, 0x0810, 0, 0), + MX6_PAD_EIM_CS0__MIPI_CORE_DPHY_OUT_24 = IOMUX_PAD(0x040C, 0x00F8, 4, 0x0000, 0, 0), + MX6_PAD_EIM_CS0__GPIO_2_23 = IOMUX_PAD(0x040C, 0x00F8, 5, 0x0000, 0, 0), + MX6_PAD_EIM_CS0__TPSMP_HDATA_7 = IOMUX_PAD(0x040C, 0x00F8, 6, 0x0000, 0, 0), + MX6_PAD_EIM_CS1__WEIM_WEIM_CS_1 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, 0), + MX6_PAD_EIM_CS1__IPU1_DI1_PIN6 = IOMUX_PAD(0x0410, 0x00FC, 1, 0x0000, 0, 0), + MX6_PAD_EIM_CS1__ECSPI2_MOSI = IOMUX_PAD(0x0410, 0x00FC, 2, 0x0818, 0, 0), + MX6_PAD_EIM_CS1__MIPI_CORE_DPHY_OUT_25 = IOMUX_PAD(0x0410, 0x00FC, 4, 0x0000, 0, 0), + MX6_PAD_EIM_CS1__GPIO_2_24 = IOMUX_PAD(0x0410, 0x00FC, 5, 0x0000, 0, 0), + MX6_PAD_EIM_CS1__TPSMP_HDATA_8 = IOMUX_PAD(0x0410, 0x00FC, 6, 0x0000, 0, 0), + MX6_PAD_EIM_OE__WEIM_WEIM_OE = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, 0), + MX6_PAD_EIM_OE__IPU1_DI1_PIN7 = IOMUX_PAD(0x0414, 0x0100, 1, 0x0000, 0, 0), + MX6_PAD_EIM_OE__ECSPI2_MISO = IOMUX_PAD(0x0414, 0x0100, 2, 0x0814, 0, 0), + MX6_PAD_EIM_OE__MIPI_CORE_DPHY_OUT_26 = IOMUX_PAD(0x0414, 0x0100, 4, 0x0000, 0, 0), + MX6_PAD_EIM_OE__GPIO_2_25 = IOMUX_PAD(0x0414, 0x0100, 5, 0x0000, 0, 0), + MX6_PAD_EIM_OE__TPSMP_HDATA_9 = IOMUX_PAD(0x0414, 0x0100, 6, 0x0000, 0, 0), + MX6_PAD_EIM_RW__WEIM_WEIM_RW = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, 0), + MX6_PAD_EIM_RW__IPU1_DI1_PIN8 = IOMUX_PAD(0x0418, 0x0104, 1, 0x0000, 0, 0), + MX6_PAD_EIM_RW__ECSPI2_SS0 = IOMUX_PAD(0x0418, 0x0104, 2, 0x081C, 0, 0), + MX6_PAD_EIM_RW__MIPI_CORE_DPHY_OUT_27 = IOMUX_PAD(0x0418, 0x0104, 4, 0x0000, 0, 0), + MX6_PAD_EIM_RW__GPIO_2_26 = IOMUX_PAD(0x0418, 0x0104, 5, 0x0000, 0, 0), + MX6_PAD_EIM_RW__TPSMP_HDATA_10 = IOMUX_PAD(0x0418, 0x0104, 6, 0x0000, 0, 0), + MX6_PAD_EIM_RW__SRC_BT_CFG_29 = IOMUX_PAD(0x0418, 0x0104, 7, 0x0000, 0, 0), + MX6_PAD_EIM_LBA__WEIM_WEIM_LBA = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, 0), + MX6_PAD_EIM_LBA__IPU1_DI1_PIN17 = IOMUX_PAD(0x041C, 0x0108, 1, 0x0000, 0, 0), + MX6_PAD_EIM_LBA__ECSPI2_SS1 = IOMUX_PAD(0x041C, 0x0108, 2, 0x0820, 0, 0), + MX6_PAD_EIM_LBA__GPIO_2_27 = IOMUX_PAD(0x041C, 0x0108, 5, 0x0000, 0, 0), + MX6_PAD_EIM_LBA__TPSMP_HDATA_11 = IOMUX_PAD(0x041C, 0x0108, 6, 0x0000, 0, 0), + MX6_PAD_EIM_LBA__SRC_BT_CFG_26 = IOMUX_PAD(0x041C, 0x0108, 7, 0x0000, 0, 0), + MX6_PAD_EIM_EB0__WEIM_WEIM_EB_0 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, 0), + MX6_PAD_EIM_EB0__IPU1_DISP1_DAT_11 = IOMUX_PAD(0x0420, 0x010C, 1, 0x0000, 0, 0), + MX6_PAD_EIM_EB0__IPU2_CSI1_D_11 = IOMUX_PAD(0x0420, 0x010C, 2, 0x08B4, 1, 0), + MX6_PAD_EIM_EB0__MIPI_CORE_DPHY_OUT_0 = IOMUX_PAD(0x0420, 0x010C, 3, 0x0000, 0, 0), + MX6_PAD_EIM_EB0__CCM_PMIC_RDY = IOMUX_PAD(0x0420, 0x010C, 4, 0x07F0, 0, 0), + MX6_PAD_EIM_EB0__GPIO_2_28 = IOMUX_PAD(0x0420, 0x010C, 5, 0x0000, 0, 0), + MX6_PAD_EIM_EB0__TPSMP_HDATA_12 = IOMUX_PAD(0x0420, 0x010C, 6, 0x0000, 0, 0), + MX6_PAD_EIM_EB0__SRC_BT_CFG_27 = IOMUX_PAD(0x0420, 0x010C, 7, 0x0000, 0, 0), + MX6_PAD_EIM_EB1__WEIM_WEIM_EB_1 = IOMUX_PAD(0x0424, 0x0110, 0, 0x0000, 0, 0), + MX6_PAD_EIM_EB1__IPU1_DISP1_DAT_10 = IOMUX_PAD(0x0424, 0x0110, 1, 0x0000, 0, 0), + MX6_PAD_EIM_EB1__IPU2_CSI1_D_10 = IOMUX_PAD(0x0424, 0x0110, 2, 0x08B0, 1, 0), + MX6_PAD_EIM_EB1__MIPI_CORE_DPHY__OUT_1 = IOMUX_PAD(0x0424, 0x0110, 3, 0x0000, 0, 0), + MX6_PAD_EIM_EB1__GPIO_2_29 = IOMUX_PAD(0x0424, 0x0110, 5, 0x0000, 0, 0), + MX6_PAD_EIM_EB1__TPSMP_HDATA_13 = IOMUX_PAD(0x0424, 0x0110, 6, 0x0000, 0, 0), + MX6_PAD_EIM_EB1__SRC_BT_CFG_28 = IOMUX_PAD(0x0424, 0x0110, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA0__WEIM_WEIM_DA_A_0 = IOMUX_PAD(0x0428, 0x0114, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA0__IPU1_DISP1_DAT_9 = IOMUX_PAD(0x0428, 0x0114, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA0__IPU2_CSI1_D_9 = IOMUX_PAD(0x0428, 0x0114, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA0__MIPI_CORE_DPHY__OUT_2 = IOMUX_PAD(0x0428, 0x0114, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA0__GPIO_3_0 = IOMUX_PAD(0x0428, 0x0114, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA0__TPSMP_HDATA_14 = IOMUX_PAD(0x0428, 0x0114, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA0__SRC_BT_CFG_0 = IOMUX_PAD(0x0428, 0x0114, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__WEIM_WEIM_DA_A_1 = IOMUX_PAD(0x042C, 0x0118, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__IPU1_DISP1_DAT_8 = IOMUX_PAD(0x042C, 0x0118, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__IPU2_CSI1_D_8 = IOMUX_PAD(0x042C, 0x0118, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__MIPI_CORE_DPHY_OUT_3 = IOMUX_PAD(0x042C, 0x0118, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__USBPHY1_TX_LS_MODE = IOMUX_PAD(0x042C, 0x0118, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__GPIO_3_1 = IOMUX_PAD(0x042C, 0x0118, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__TPSMP_HDATA_15 = IOMUX_PAD(0x042C, 0x0118, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA1__SRC_BT_CFG_1 = IOMUX_PAD(0x042C, 0x0118, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__WEIM_WEIM_DA_A_2 = IOMUX_PAD(0x0430, 0x011C, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__IPU1_DISP1_DAT_7 = IOMUX_PAD(0x0430, 0x011C, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__IPU2_CSI1_D_7 = IOMUX_PAD(0x0430, 0x011C, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__MIPI_CORE_DPHY_OUT_4 = IOMUX_PAD(0x0430, 0x011C, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__USBPHY1_TX_HS_MODE = IOMUX_PAD(0x0430, 0x011C, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__GPIO_3_2 = IOMUX_PAD(0x0430, 0x011C, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__TPSMP_HDATA_16 = IOMUX_PAD(0x0430, 0x011C, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA2__SRC_BT_CFG_2 = IOMUX_PAD(0x0430, 0x011C, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__WEIM_WEIM_DA_A_3 = IOMUX_PAD(0x0434, 0x0120, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__IPU1_DISP1_DAT_6 = IOMUX_PAD(0x0434, 0x0120, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__IPU2_CSI1_D_6 = IOMUX_PAD(0x0434, 0x0120, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__MIPI_CORE_DPHY_OUT_5 = IOMUX_PAD(0x0434, 0x0120, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__USBPHY1_TX_HIZ = IOMUX_PAD(0x0434, 0x0120, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__GPIO_3_3 = IOMUX_PAD(0x0434, 0x0120, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__TPSMP_HDATA_17 = IOMUX_PAD(0x0434, 0x0120, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA3__SRC_BT_CFG_3 = IOMUX_PAD(0x0434, 0x0120, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__WEIM_WEIM_DA_A_4 = IOMUX_PAD(0x0438, 0x0124, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__IPU1_DISP1_DAT_5 = IOMUX_PAD(0x0438, 0x0124, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__IPU2_CSI1_D_5 = IOMUX_PAD(0x0438, 0x0124, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__MIPI_CORE_DPHY_OUT_6 = IOMUX_PAD(0x0438, 0x0124, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__ANATOP_USBPHY1_TX_EN = IOMUX_PAD(0x0438, 0x0124, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__GPIO_3_4 = IOMUX_PAD(0x0438, 0x0124, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__TPSMP_HDATA_18 = IOMUX_PAD(0x0438, 0x0124, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA4__SRC_BT_CFG_4 = IOMUX_PAD(0x0438, 0x0124, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__WEIM_WEIM_DA_A_5 = IOMUX_PAD(0x043C, 0x0128, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__IPU1_DISP1_DAT_4 = IOMUX_PAD(0x043C, 0x0128, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__IPU2_CSI1_D_4 = IOMUX_PAD(0x043C, 0x0128, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__MIPI_CORE_DPHY_OUT_7 = IOMUX_PAD(0x043C, 0x0128, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__ANATOP_USBPHY1_TX_DP = IOMUX_PAD(0x043C, 0x0128, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__GPIO_3_5 = IOMUX_PAD(0x043C, 0x0128, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__TPSMP_HDATA_19 = IOMUX_PAD(0x043C, 0x0128, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA5__SRC_BT_CFG_5 = IOMUX_PAD(0x043C, 0x0128, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__WEIM_WEIM_DA_A_6 = IOMUX_PAD(0x0440, 0x012C, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__IPU1_DISP1_DAT_3 = IOMUX_PAD(0x0440, 0x012C, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__IPU2_CSI1_D_3 = IOMUX_PAD(0x0440, 0x012C, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__MIPI_CORE_DPHY_OUT_8 = IOMUX_PAD(0x0440, 0x012C, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__ANATOP_USBPHY1_TX_DN = IOMUX_PAD(0x0440, 0x012C, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__GPIO_3_6 = IOMUX_PAD(0x0440, 0x012C, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__TPSMP_HDATA_20 = IOMUX_PAD(0x0440, 0x012C, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA6__SRC_BT_CFG_6 = IOMUX_PAD(0x0440, 0x012C, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA7__WEIM_WEIM_DA_A_7 = IOMUX_PAD(0x0444, 0x0130, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA7__IPU1_DISP1_DAT_2 = IOMUX_PAD(0x0444, 0x0130, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA7__IPU2_CSI1_D_2 = IOMUX_PAD(0x0444, 0x0130, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA7__MIPI_CORE_DPHY_OUT_9 = IOMUX_PAD(0x0444, 0x0130, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA7__GPIO_3_7 = IOMUX_PAD(0x0444, 0x0130, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA7__TPSMP_HDATA_21 = IOMUX_PAD(0x0444, 0x0130, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA7__SRC_BT_CFG_7 = IOMUX_PAD(0x0444, 0x0130, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA8__WEIM_WEIM_DA_A_8 = IOMUX_PAD(0x0448, 0x0134, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA8__IPU1_DISP1_DAT_1 = IOMUX_PAD(0x0448, 0x0134, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA8__IPU2_CSI1_D_1 = IOMUX_PAD(0x0448, 0x0134, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA8__MIPI_CORE_DPHY_OUT_10 = IOMUX_PAD(0x0448, 0x0134, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA8__GPIO_3_8 = IOMUX_PAD(0x0448, 0x0134, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA8__TPSMP_HDATA_22 = IOMUX_PAD(0x0448, 0x0134, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA8__SRC_BT_CFG_8 = IOMUX_PAD(0x0448, 0x0134, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__WEIM_WEIM_DA_A_9 = IOMUX_PAD(0x044C, 0x0138, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__IPU1_DISP1_DAT_0 = IOMUX_PAD(0x044C, 0x0138, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__IPU2_CSI1_D_0 = IOMUX_PAD(0x044C, 0x0138, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__MIPI_CORE_DPHY_OUT_11 = IOMUX_PAD(0x044C, 0x0138, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__GPIO_3_9 = IOMUX_PAD(0x044C, 0x0138, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__TPSMP_HDATA_23 = IOMUX_PAD(0x044C, 0x0138, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA9__SRC_BT_CFG_9 = IOMUX_PAD(0x044C, 0x0138, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA10__WEIM_WEIM_DA_A_10 = IOMUX_PAD(0x0450, 0x013C, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA10__IPU1_DI1_PIN15 = IOMUX_PAD(0x0450, 0x013C, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA10__IPU2_CSI1_DATA_EN = IOMUX_PAD(0x0450, 0x013C, 2, 0x08D8, 1, 0), + MX6_PAD_EIM_DA10__MIPI_CORE_DPHY_OUT12 = IOMUX_PAD(0x0450, 0x013C, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA10__GPIO_3_10 = IOMUX_PAD(0x0450, 0x013C, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA10__TPSMP_HDATA_24 = IOMUX_PAD(0x0450, 0x013C, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA10__SRC_BT_CFG_10 = IOMUX_PAD(0x0450, 0x013C, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA11__WEIM_WEIM_DA_A_11 = IOMUX_PAD(0x0454, 0x0140, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA11__IPU1_DI1_PIN2 = IOMUX_PAD(0x0454, 0x0140, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA11__IPU2_CSI1_HSYNC = IOMUX_PAD(0x0454, 0x0140, 2, 0x08DC, 1, 0), + MX6_PAD_EIM_DA11__MIPI_CORE_DPHY_OUT13 = IOMUX_PAD(0x0454, 0x0140, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA11__SDMA_DBG_EVT_CHN_6 = IOMUX_PAD(0x0454, 0x0140, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA11__GPIO_3_11 = IOMUX_PAD(0x0454, 0x0140, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA11__TPSMP_HDATA_25 = IOMUX_PAD(0x0454, 0x0140, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA11__SRC_BT_CFG_11 = IOMUX_PAD(0x0454, 0x0140, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA12__WEIM_WEIM_DA_A_12 = IOMUX_PAD(0x0458, 0x0144, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA12__IPU1_DI1_PIN3 = IOMUX_PAD(0x0458, 0x0144, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA12__IPU2_CSI1_VSYNC = IOMUX_PAD(0x0458, 0x0144, 2, 0x08E4, 1, 0), + MX6_PAD_EIM_DA12__MIPI_CORE_DPHY_OUT14 = IOMUX_PAD(0x0458, 0x0144, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA12__SDMA_DEBUG_EVT_CHN_3 = IOMUX_PAD(0x0458, 0x0144, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA12__GPIO_3_12 = IOMUX_PAD(0x0458, 0x0144, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA12__TPSMP_HDATA_26 = IOMUX_PAD(0x0458, 0x0144, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA12__SRC_BT_CFG_12 = IOMUX_PAD(0x0458, 0x0144, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA13__WEIM_WEIM_DA_A_13 = IOMUX_PAD(0x045C, 0x0148, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA13__IPU1_DI1_D0_CS = IOMUX_PAD(0x045C, 0x0148, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA13__CCM_DI1_EXT_CLK = IOMUX_PAD(0x045C, 0x0148, 2, 0x07EC, 1, 0), + MX6_PAD_EIM_DA13__MIPI_CORE_DPHY_OUT15 = IOMUX_PAD(0x045C, 0x0148, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA13__SDMA_DEBUG_EVT_CHN_4 = IOMUX_PAD(0x045C, 0x0148, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA13__GPIO_3_13 = IOMUX_PAD(0x045C, 0x0148, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA13__TPSMP_HDATA_27 = IOMUX_PAD(0x045C, 0x0148, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA13__SRC_BT_CFG_13 = IOMUX_PAD(0x045C, 0x0148, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__WEIM_WEIM_DA_A_14 = IOMUX_PAD(0x0460, 0x014C, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__IPU1_DI1_D1_CS = IOMUX_PAD(0x0460, 0x014C, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__CCM_DI0_EXT_CLK = IOMUX_PAD(0x0460, 0x014C, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__MIPI_CORE_DPHY_OUT16 = IOMUX_PAD(0x0460, 0x014C, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__SDMA_DEBUG_EVT_CHN_5 = IOMUX_PAD(0x0460, 0x014C, 4, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__GPIO_3_14 = IOMUX_PAD(0x0460, 0x014C, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__TPSMP_HDATA_28 = IOMUX_PAD(0x0460, 0x014C, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA14__SRC_BT_CFG_14 = IOMUX_PAD(0x0460, 0x014C, 7, 0x0000, 0, 0), + MX6_PAD_EIM_DA15__WEIM_WEIM_DA_A_15 = IOMUX_PAD(0x0464, 0x0150, 0, 0x0000, 0, 0), + MX6_PAD_EIM_DA15__IPU1_DI1_PIN1 = IOMUX_PAD(0x0464, 0x0150, 1, 0x0000, 0, 0), + MX6_PAD_EIM_DA15__IPU1_DI1_PIN4 = IOMUX_PAD(0x0464, 0x0150, 2, 0x0000, 0, 0), + MX6_PAD_EIM_DA15__MIPI_CORE_DPHY_OUT17 = IOMUX_PAD(0x0464, 0x0150, 3, 0x0000, 0, 0), + MX6_PAD_EIM_DA15__GPIO_3_15 = IOMUX_PAD(0x0464, 0x0150, 5, 0x0000, 0, 0), + MX6_PAD_EIM_DA15__TPSMP_HDATA_29 = IOMUX_PAD(0x0464, 0x0150, 6, 0x0000, 0, 0), + MX6_PAD_EIM_DA15__SRC_BT_CFG_15 = IOMUX_PAD(0x0464, 0x0150, 7, 0x0000, 0, 0), + MX6_PAD_EIM_WAIT__WEIM_WEIM_WAIT = IOMUX_PAD(0x0468, 0x0154, 0, 0x0000, 0, 0), + MX6_PAD_EIM_WAIT__WEIM_WEIM_DTACK_B = IOMUX_PAD(0x0468, 0x0154, 1, 0x0000, 0, 0), + MX6_PAD_EIM_WAIT__GPIO_5_0 = IOMUX_PAD(0x0468, 0x0154, 5, 0x0000, 0, 0), + MX6_PAD_EIM_WAIT__TPSMP_HDATA_30 = IOMUX_PAD(0x0468, 0x0154, 6, 0x0000, 0, 0), + MX6_PAD_EIM_WAIT__SRC_BT_CFG_25 = IOMUX_PAD(0x0468, 0x0154, 7, 0x0000, 0, 0), + MX6_PAD_EIM_BCLK__WEIM_WEIM_BCLK = IOMUX_PAD(0x046C, 0x0158, 0, 0x0000, 0, 0), + MX6_PAD_EIM_BCLK__IPU1_DI1_PIN16 = IOMUX_PAD(0x046C, 0x0158, 1, 0x0000, 0, 0), + MX6_PAD_EIM_BCLK__GPIO_6_31 = IOMUX_PAD(0x046C, 0x0158, 5, 0x0000, 0, 0), + MX6_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0), + MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0), + MX6_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0), + MX6_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0), + MX6_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x0470, 0x015C, 5, 0x0000, 0, 0), + MX6_PAD_DI0_DISP_CLK__MMDC_DEBUG_0 = IOMUX_PAD(0x0470, 0x015C, 6, 0x0000, 0, 0), + MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN15__IPU2_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 1, 0x0000, 0, 0), + MX6_PAD_DI0_PIN15__AUDMUX_AUD6_TXC = IOMUX_PAD(0x0474, 0x0160, 2, 0x0000, 0, 0), + MX6_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29 = IOMUX_PAD(0x0474, 0x0160, 3, 0x0000, 0, 0), + MX6_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1 = IOMUX_PAD(0x0474, 0x0160, 4, 0x0000, 0, 0), + MX6_PAD_DI0_PIN15__GPIO_4_17 = IOMUX_PAD(0x0474, 0x0160, 5, 0x0000, 0, 0), + MX6_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1 = IOMUX_PAD(0x0474, 0x0160, 6, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN2__IPU2_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 1, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x0478, 0x0164, 2, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30 = IOMUX_PAD(0x0478, 0x0164, 3, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__SDMA_DBG_CORE_STA_2 = IOMUX_PAD(0x0478, 0x0164, 4, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__GPIO_4_18 = IOMUX_PAD(0x0478, 0x0164, 5, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__MMDC_DEBUG_2 = IOMUX_PAD(0x0478, 0x0164, 6, 0x0000, 0, 0), + MX6_PAD_DI0_PIN2__PL301_PER1_HADDR_9 = IOMUX_PAD(0x0478, 0x0164, 7, 0x0000, 0, 0), + MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN3__IPU2_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 1, 0x0000, 0, 0), + MX6_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x047C, 0x0168, 2, 0x0000, 0, 0), + MX6_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31 = IOMUX_PAD(0x047C, 0x0168, 3, 0x0000, 0, 0), + MX6_PAD_DI0_PIN3__SDMA_DBG_CORE_STA_3 = IOMUX_PAD(0x047C, 0x0168, 4, 0x0000, 0, 0), + MX6_PAD_DI0_PIN3__GPIO_4_19 = IOMUX_PAD(0x047C, 0x0168, 5, 0x0000, 0, 0), + MX6_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3 = IOMUX_PAD(0x047C, 0x0168, 6, 0x0000, 0, 0), + MX6_PAD_DI0_PIN3__PL301_PER1_HADDR_10 = IOMUX_PAD(0x047C, 0x0168, 7, 0x0000, 0, 0), + MX6_PAD_DI0_PIN4__IPU1_DI0_PIN4 = IOMUX_PAD(0x0480, 0x016C, 0, 0x0000, 0, 0), + MX6_PAD_DI0_PIN4__IPU2_DI0_PIN4 = IOMUX_PAD(0x0480, 0x016C, 1, 0x0000, 0, 0), + MX6_PAD_DI0_PIN4__AUDMUX_AUD6_RXD = IOMUX_PAD(0x0480, 0x016C, 2, 0x0000, 0, 0), + MX6_PAD_DI0_PIN4__USDHC1_WP = IOMUX_PAD(0x0480, 0x016C, 3, 0x094C, 0, 0), + MX6_PAD_DI0_PIN4__SDMA_DEBUG_YIELD = IOMUX_PAD(0x0480, 0x016C, 4, 0x0000, 0, 0), + MX6_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4 = IOMUX_PAD(0x0480, 0x016C, 6, 0x0000, 0, 0), + MX6_PAD_DI0_PIN4__PL301_PER1_HADDR_11 = IOMUX_PAD(0x0480, 0x016C, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT0__ECSPI3_SCLK = IOMUX_PAD(0x0484, 0x0170, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0 = IOMUX_PAD(0x0484, 0x0170, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN = IOMUX_PAD(0x0484, 0x0170, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT0__GPIO_4_21 = IOMUX_PAD(0x0484, 0x0170, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5 = IOMUX_PAD(0x0484, 0x0170, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT1__ECSPI3_MOSI = IOMUX_PAD(0x0488, 0x0174, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1 = IOMUX_PAD(0x0488, 0x0174, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT1__SDMA_DBG_EVT_CHNSL = IOMUX_PAD(0x0488, 0x0174, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT1__GPIO_4_22 = IOMUX_PAD(0x0488, 0x0174, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT1__MMDC_DEBUG_6 = IOMUX_PAD(0x0488, 0x0174, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT1__PL301_PER1_HADR_12 = IOMUX_PAD(0x0488, 0x0174, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__ECSPI3_MISO = IOMUX_PAD(0x048C, 0x0178, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2 = IOMUX_PAD(0x048C, 0x0178, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__SDMA_DEBUG_MODE = IOMUX_PAD(0x048C, 0x0178, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__GPIO_4_23 = IOMUX_PAD(0x048C, 0x0178, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__MMDC_DEBUG_7 = IOMUX_PAD(0x048C, 0x0178, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT2__PL301_PER1_HADR_13 = IOMUX_PAD(0x048C, 0x0178, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT3__ECSPI3_SS0 = IOMUX_PAD(0x0490, 0x017C, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3 = IOMUX_PAD(0x0490, 0x017C, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT3__SDMA_DBG_BUS_ERROR = IOMUX_PAD(0x0490, 0x017C, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT3__GPIO_4_24 = IOMUX_PAD(0x0490, 0x017C, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8 = IOMUX_PAD(0x0490, 0x017C, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT3__PL301_PER1_HADR_14 = IOMUX_PAD(0x0490, 0x017C, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT4__ECSPI3_SS1 = IOMUX_PAD(0x0494, 0x0180, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4 = IOMUX_PAD(0x0494, 0x0180, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB = IOMUX_PAD(0x0494, 0x0180, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT4__GPIO_4_25 = IOMUX_PAD(0x0494, 0x0180, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9 = IOMUX_PAD(0x0494, 0x0180, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT4__PL301_PER1_HADR_15 = IOMUX_PAD(0x0494, 0x0180, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT5__ECSPI3_SS2 = IOMUX_PAD(0x0498, 0x0184, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x0498, 0x0184, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT5__SDMA_DBG_MCH_DMBUS = IOMUX_PAD(0x0498, 0x0184, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT5__GPIO_4_26 = IOMUX_PAD(0x0498, 0x0184, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT5__MMDC_DEBUG_10 = IOMUX_PAD(0x0498, 0x0184, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT5__PL301_PER1_HADR_16 = IOMUX_PAD(0x0498, 0x0184, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT6__ECSPI3_SS3 = IOMUX_PAD(0x049C, 0x0188, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC = IOMUX_PAD(0x049C, 0x0188, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT6__SDMA_DBG_RTBUF_WRT = IOMUX_PAD(0x049C, 0x0188, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT6__GPIO_4_27 = IOMUX_PAD(0x049C, 0x0188, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT6__MMDC_DEBUG_11 = IOMUX_PAD(0x049C, 0x0188, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT6__PL301_PER1_HADR_17 = IOMUX_PAD(0x049C, 0x0188, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT7__ECSPI3_RDY = IOMUX_PAD(0x04A0, 0x018C, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5 = IOMUX_PAD(0x04A0, 0x018C, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT7__SDMA_DBG_EVT_CHN_0 = IOMUX_PAD(0x04A0, 0x018C, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT7__GPIO_4_28 = IOMUX_PAD(0x04A0, 0x018C, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT7__MMDC_DEBUG_12 = IOMUX_PAD(0x04A0, 0x018C, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT7__PL301_PER1_HADR_18 = IOMUX_PAD(0x04A0, 0x018C, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT8__PWM1_PWMO = IOMUX_PAD(0x04A4, 0x0190, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT8__WDOG1_WDOG_B = IOMUX_PAD(0x04A4, 0x0190, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT8__SDMA_DBG_EVT_CHN_1 = IOMUX_PAD(0x04A4, 0x0190, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT8__GPIO_4_29 = IOMUX_PAD(0x04A4, 0x0190, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT8__MMDC_DEBUG_13 = IOMUX_PAD(0x04A4, 0x0190, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT8__PL301_PER1_HADR_19 = IOMUX_PAD(0x04A4, 0x0190, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT9__PWM2_PWMO = IOMUX_PAD(0x04A8, 0x0194, 2, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT9__WDOG2_WDOG_B = IOMUX_PAD(0x04A8, 0x0194, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT9__SDMA_DBG_EVT_CHN_2 = IOMUX_PAD(0x04A8, 0x0194, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT9__GPIO_4_30 = IOMUX_PAD(0x04A8, 0x0194, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT9__MMDC_DEBUG_14 = IOMUX_PAD(0x04A8, 0x0194, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT9__PL301_PER1_HADR_20 = IOMUX_PAD(0x04A8, 0x0194, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT10__USDHC1_DBG_6 = IOMUX_PAD(0x04AC, 0x0198, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3 = IOMUX_PAD(0x04AC, 0x0198, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT10__GPIO_4_31 = IOMUX_PAD(0x04AC, 0x0198, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT10__MMDC_DEBUG_15 = IOMUX_PAD(0x04AC, 0x0198, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT10__PL301_PER1_HADR21 = IOMUX_PAD(0x04AC, 0x0198, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7 = IOMUX_PAD(0x04B0, 0x019C, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4 = IOMUX_PAD(0x04B0, 0x019C, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT11__GPIO_5_5 = IOMUX_PAD(0x04B0, 0x019C, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT11__MMDC_DEBUG_16 = IOMUX_PAD(0x04B0, 0x019C, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT11__PL301_PER1_HADR22 = IOMUX_PAD(0x04B0, 0x019C, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT12__RESERVED_RESERVED = IOMUX_PAD(0x04B4, 0x01A0, 3, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5 = IOMUX_PAD(0x04B4, 0x01A0, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT12__GPIO_5_6 = IOMUX_PAD(0x04B4, 0x01A0, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT12__MMDC_DEBUG_17 = IOMUX_PAD(0x04B4, 0x01A0, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT12__PL301_PER1_HADR23 = IOMUX_PAD(0x04B4, 0x01A0, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x04B8, 0x01A4, 3, 0x07D8, 1, 0), + MX6_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0 = IOMUX_PAD(0x04B8, 0x01A4, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT13__GPIO_5_7 = IOMUX_PAD(0x04B8, 0x01A4, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT13__MMDC_DEBUG_18 = IOMUX_PAD(0x04B8, 0x01A4, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT13__PL301_PER1_HADR24 = IOMUX_PAD(0x04B8, 0x01A4, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC = IOMUX_PAD(0x04BC, 0x01A8, 3, 0x07D4, 1, 0), + MX6_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1 = IOMUX_PAD(0x04BC, 0x01A8, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT14__GPIO_5_8 = IOMUX_PAD(0x04BC, 0x01A8, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT14__MMDC_DEBUG_19 = IOMUX_PAD(0x04BC, 0x01A8, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT15__ECSPI1_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 2, 0x0804, 1, 0), + MX6_PAD_DISP0_DAT15__ECSPI2_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 3, 0x0820, 1, 0), + MX6_PAD_DISP0_DAT15__SDMA_DBG_EVT_CHN2 = IOMUX_PAD(0x04C0, 0x01AC, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT15__GPIO_5_9 = IOMUX_PAD(0x04C0, 0x01AC, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT15__MMDC_DEBUG_20 = IOMUX_PAD(0x04C0, 0x01AC, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT15__PL301_PER1_HADR25 = IOMUX_PAD(0x04C0, 0x01AC, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT16__ECSPI2_MOSI = IOMUX_PAD(0x04C4, 0x01B0, 2, 0x0818, 1, 0), + MX6_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC = IOMUX_PAD(0x04C4, 0x01B0, 3, 0x07DC, 0, 0), + MX6_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 = IOMUX_PAD(0x04C4, 0x01B0, 4, 0x090C, 0, 0), + MX6_PAD_DISP0_DAT16__GPIO_5_10 = IOMUX_PAD(0x04C4, 0x01B0, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT16__MMDC_DEBUG_21 = IOMUX_PAD(0x04C4, 0x01B0, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT16__PL301_PER1_HADR26 = IOMUX_PAD(0x04C4, 0x01B0, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT17__ECSPI2_MISO = IOMUX_PAD(0x04C8, 0x01B4, 2, 0x0814, 1, 0), + MX6_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD = IOMUX_PAD(0x04C8, 0x01B4, 3, 0x07D0, 0, 0), + MX6_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 = IOMUX_PAD(0x04C8, 0x01B4, 4, 0x0910, 0, 0), + MX6_PAD_DISP0_DAT17__GPIO_5_11 = IOMUX_PAD(0x04C8, 0x01B4, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT17__MMDC_DEBUG_22 = IOMUX_PAD(0x04C8, 0x01B4, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT17__PL301_PER1_HADR27 = IOMUX_PAD(0x04C8, 0x01B4, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT18__ECSPI2_SS0 = IOMUX_PAD(0x04CC, 0x01B8, 2, 0x081C, 1, 0), + MX6_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x04CC, 0x01B8, 3, 0x07E0, 0, 0), + MX6_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x04CC, 0x01B8, 4, 0x07C0, 0, 0), + MX6_PAD_DISP0_DAT18__GPIO_5_12 = IOMUX_PAD(0x04CC, 0x01B8, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT18__MMDC_DEBUG_23 = IOMUX_PAD(0x04CC, 0x01B8, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT18__WEIM_WEIM_CS_2 = IOMUX_PAD(0x04CC, 0x01B8, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT19__ECSPI2_SCLK = IOMUX_PAD(0x04D0, 0x01BC, 2, 0x0810, 1, 0), + MX6_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD = IOMUX_PAD(0x04D0, 0x01BC, 3, 0x07CC, 0, 0), + MX6_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC = IOMUX_PAD(0x04D0, 0x01BC, 4, 0x07BC, 0, 0), + MX6_PAD_DISP0_DAT19__GPIO_5_13 = IOMUX_PAD(0x04D0, 0x01BC, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT19__MMDC_DEBUG_24 = IOMUX_PAD(0x04D0, 0x01BC, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 = IOMUX_PAD(0x04D0, 0x01BC, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT20__ECSPI1_SCLK = IOMUX_PAD(0x04D4, 0x01C0, 2, 0x07F4, 1, 0), + MX6_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC = IOMUX_PAD(0x04D4, 0x01C0, 3, 0x07C4, 0, 0), + MX6_PAD_DISP0_DAT20__SDMA_DBG_EVT_CHN7 = IOMUX_PAD(0x04D4, 0x01C0, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT20__GPIO_5_14 = IOMUX_PAD(0x04D4, 0x01C0, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT20__MMDC_DEBUG_25 = IOMUX_PAD(0x04D4, 0x01C0, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT20__PL301_PER1_HADR28 = IOMUX_PAD(0x04D4, 0x01C0, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT21__ECSPI1_MOSI = IOMUX_PAD(0x04D8, 0x01C4, 2, 0x07FC, 1, 0), + MX6_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD = IOMUX_PAD(0x04D8, 0x01C4, 3, 0x07B8, 1, 0), + MX6_PAD_DISP0_DAT21__SDMA_DBG_BUS_DEV0 = IOMUX_PAD(0x04D8, 0x01C4, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT21__GPIO_5_15 = IOMUX_PAD(0x04D8, 0x01C4, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT21__MMDC_DEBUG_26 = IOMUX_PAD(0x04D8, 0x01C4, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT21__PL301_PER1_HADR29 = IOMUX_PAD(0x04D8, 0x01C4, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT22__ECSPI1_MISO = IOMUX_PAD(0x04DC, 0x01C8, 2, 0x07F8, 1, 0), + MX6_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x04DC, 0x01C8, 3, 0x07C8, 1, 0), + MX6_PAD_DISP0_DAT22__SDMA_DBG_BUS_DEV1 = IOMUX_PAD(0x04DC, 0x01C8, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT22__GPIO_5_16 = IOMUX_PAD(0x04DC, 0x01C8, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT22__MMDC_DEBUG_27 = IOMUX_PAD(0x04DC, 0x01C8, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT22__PL301_PER1_HADR30 = IOMUX_PAD(0x04DC, 0x01C8, 7, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 1, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT23__ECSPI1_SS0 = IOMUX_PAD(0x04E0, 0x01CC, 2, 0x0800, 1, 0), + MX6_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD = IOMUX_PAD(0x04E0, 0x01CC, 3, 0x07B4, 1, 0), + MX6_PAD_DISP0_DAT23__SDMA_DBG_BUS_DEV2 = IOMUX_PAD(0x04E0, 0x01CC, 4, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT23__GPIO_5_17 = IOMUX_PAD(0x04E0, 0x01CC, 5, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT23__MMDC_DEBUG_28 = IOMUX_PAD(0x04E0, 0x01CC, 6, 0x0000, 0, 0), + MX6_PAD_DISP0_DAT23__PL301_PER1_HADR31 = IOMUX_PAD(0x04E0, 0x01CC, 7, 0x0000, 0, 0), + MX6_PAD_ENET_MDIO__RESERVED_RESERVED = IOMUX_PAD(0x04E4, 0x01D0, 0, 0x0000, 0, 0), + MX6_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x04E4, 0x01D0, 1, 0x0840, 0, 0), + MX6_PAD_ENET_MDIO__ESAI1_SCKR = IOMUX_PAD(0x04E4, 0x01D0, 2, 0x086C, 0, 0), + MX6_PAD_ENET_MDIO__SDMA_DEBUG_BUS_DEV3 = IOMUX_PAD(0x04E4, 0x01D0, 3, 0x0000, 0, 0), + MX6_PAD_ENET_MDIO__ENET_1588_EVT1_OUT = IOMUX_PAD(0x04E4, 0x01D0, 4, 0x0000, 0, 0), + MX6_PAD_ENET_MDIO__GPIO_1_22 = IOMUX_PAD(0x04E4, 0x01D0, 5, 0x0000, 0, 0), + MX6_PAD_ENET_MDIO__SPDIF_PLOCK = IOMUX_PAD(0x04E4, 0x01D0, 6, 0x0000, 0, 0), + MX6_PAD_ENET_REF_CLK__RESERVED_RSRVED = IOMUX_PAD(0x04E8, 0x01D4, 0, 0x0000, 0, 0), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x04E8, 0x01D4, 1, 0x0000, 0, 0), + MX6_PAD_ENET_REF_CLK__ESAI1_FSR = IOMUX_PAD(0x04E8, 0x01D4, 2, 0x085C, 0, 0), + MX6_PAD_ENET_REF_CLK__SDMA_DBGBUS_DEV4 = IOMUX_PAD(0x04E8, 0x01D4, 3, 0x0000, 0, 0), + MX6_PAD_ENET_REF_CLK__GPIO_1_23 = IOMUX_PAD(0x04E8, 0x01D4, 5, 0x0000, 0, 0), + MX6_PAD_ENET_REF_CLK__SPDIF_SRCLK = IOMUX_PAD(0x04E8, 0x01D4, 6, 0x0000, 0, 0), + MX6_PAD_ENET_REF_CLK__USBPHY1_RX_SQH = IOMUX_PAD(0x04E8, 0x01D4, 7, 0x0000, 0, 0), + MX6_PAD_ENET_RX_ER__ENET_RX_ER = IOMUX_PAD(0x04EC, 0x01D8, 1, 0x0000, 0, 0), + MX6_PAD_ENET_RX_ER__ESAI1_HCKR = IOMUX_PAD(0x04EC, 0x01D8, 2, 0x0864, 0, 0), + MX6_PAD_ENET_RX_ER__SPDIF_IN1 = IOMUX_PAD(0x04EC, 0x01D8, 3, 0x0914, 1, 0), + MX6_PAD_ENET_RX_ER__ENET_1588_EVT2_OUT = IOMUX_PAD(0x04EC, 0x01D8, 4, 0x0000, 0, 0), + MX6_PAD_ENET_RX_ER__GPIO_1_24 = IOMUX_PAD(0x04EC, 0x01D8, 5, 0x0000, 0, 0), + MX6_PAD_ENET_RX_ER__PHY_TDI = IOMUX_PAD(0x04EC, 0x01D8, 6, 0x0000, 0, 0), + MX6_PAD_ENET_RX_ER__USBPHY1_RX_HS_RXD = IOMUX_PAD(0x04EC, 0x01D8, 7, 0x0000, 0, 0), + MX6_PAD_ENET_CRS_DV__RESERVED_RSRVED = IOMUX_PAD(0x04F0, 0x01DC, 0, 0x0000, 0, 0), + MX6_PAD_ENET_CRS_DV__ENET_RX_EN = IOMUX_PAD(0x04F0, 0x01DC, 1, 0x0858, 1, 0), + MX6_PAD_ENET_CRS_DV__ESAI1_SCKT = IOMUX_PAD(0x04F0, 0x01DC, 2, 0x0870, 0, 0), + MX6_PAD_ENET_CRS_DV__SPDIF_EXTCLK = IOMUX_PAD(0x04F0, 0x01DC, 3, 0x0918, 1, 0), + MX6_PAD_ENET_CRS_DV__GPIO_1_25 = IOMUX_PAD(0x04F0, 0x01DC, 5, 0x0000, 0, 0), + MX6_PAD_ENET_CRS_DV__PHY_TDO = IOMUX_PAD(0x04F0, 0x01DC, 6, 0x0000, 0, 0), + MX6_PAD_ENET_CRS_DV__USBPHY1_RX_FS_RXD = IOMUX_PAD(0x04F0, 0x01DC, 7, 0x0000, 0, 0), + MX6_PAD_ENET_RXD1__MLB_MLBSIG = IOMUX_PAD(0x04F4, 0x01E0, 0, 0x0908, 0, 0), + MX6_PAD_ENET_RXD1__ENET_RDATA_1 = IOMUX_PAD(0x04F4, 0x01E0, 1, 0x084C, 1, 0), + MX6_PAD_ENET_RXD1__ESAI1_FST = IOMUX_PAD(0x04F4, 0x01E0, 2, 0x0860, 0, 0), + MX6_PAD_ENET_RXD1__ENET_1588_EVT3_OUT = IOMUX_PAD(0x04F4, 0x01E0, 4, 0x0000, 0, 0), + MX6_PAD_ENET_RXD1__GPIO_1_26 = IOMUX_PAD(0x04F4, 0x01E0, 5, 0x0000, 0, 0), + MX6_PAD_ENET_RXD1__PHY_TCK = IOMUX_PAD(0x04F4, 0x01E0, 6, 0x0000, 0, 0), + MX6_PAD_ENET_RXD1__USBPHY1_RX_DISCON = IOMUX_PAD(0x04F4, 0x01E0, 7, 0x0000, 0, 0), + MX6_PAD_ENET_RXD0__OSC32K_32K_OUT = IOMUX_PAD(0x04F8, 0x01E4, 0, 0x0000, 0, 0), + MX6_PAD_ENET_RXD0__ENET_RDATA_0 = IOMUX_PAD(0x04F8, 0x01E4, 1, 0x0848, 1, 0), + MX6_PAD_ENET_RXD0__ESAI1_HCKT = IOMUX_PAD(0x04F8, 0x01E4, 2, 0x0868, 0, 0), + MX6_PAD_ENET_RXD0__SPDIF_OUT1 = IOMUX_PAD(0x04F8, 0x01E4, 3, 0x0000, 0, 0), + MX6_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x04F8, 0x01E4, 5, 0x0000, 0, 0), + MX6_PAD_ENET_RXD0__PHY_TMS = IOMUX_PAD(0x04F8, 0x01E4, 6, 0x0000, 0, 0), + MX6_PAD_ENET_RXD0__USBPHY1_PLL_CK20DIV = IOMUX_PAD(0x04F8, 0x01E4, 7, 0x0000, 0, 0), + MX6_PAD_ENET_TX_EN__RESERVED_RSRVED = IOMUX_PAD(0x04FC, 0x01E8, 0, 0x0000, 0, 0), + MX6_PAD_ENET_TX_EN__ENET_TX_EN = IOMUX_PAD(0x04FC, 0x01E8, 1, 0x0000, 0, 0), + MX6_PAD_ENET_TX_EN__ESAI1_TX3_RX2 = IOMUX_PAD(0x04FC, 0x01E8, 2, 0x0880, 0, 0), + MX6_PAD_ENET_TX_EN__GPIO_1_28 = IOMUX_PAD(0x04FC, 0x01E8, 5, 0x0000, 0, 0), + MX6_PAD_ENET_TX_EN__SATA_PHY_TDI = IOMUX_PAD(0x04FC, 0x01E8, 6, 0x0000, 0, 0), + MX6_PAD_ENET_TX_EN__USBPHY2_RX_SQH = IOMUX_PAD(0x04FC, 0x01E8, 7, 0x0000, 0, 0), + MX6_PAD_ENET_TXD1__MLB_MLBCLK = IOMUX_PAD(0x0500, 0x01EC, 0, 0x0900, 0, 0), + MX6_PAD_ENET_TXD1__ENET_TDATA_1 = IOMUX_PAD(0x0500, 0x01EC, 1, 0x0000, 0, 0), + MX6_PAD_ENET_TXD1__ESAI1_TX2_RX3 = IOMUX_PAD(0x0500, 0x01EC, 2, 0x087C, 0, 0), + MX6_PAD_ENET_TXD1__ENET_1588_EVENT0_IN = IOMUX_PAD(0x0500, 0x01EC, 4, 0x0000, 0, 0), + MX6_PAD_ENET_TXD1__GPIO_1_29 = IOMUX_PAD(0x0500, 0x01EC, 5, 0x0000, 0, 0), + MX6_PAD_ENET_TXD1__SATA_PHY_TDO = IOMUX_PAD(0x0500, 0x01EC, 6, 0x0000, 0, 0), + MX6_PAD_ENET_TXD1__USBPHY2_RX_HS_RXD = IOMUX_PAD(0x0500, 0x01EC, 7, 0x0000, 0, 0), + MX6_PAD_ENET_TXD0__RESERVED_RSRVED = IOMUX_PAD(0x0504, 0x01F0, 0, 0x0000, 0, 0), + MX6_PAD_ENET_TXD0__ENET_TDATA_0 = IOMUX_PAD(0x0504, 0x01F0, 1, 0x0000, 0, 0), + MX6_PAD_ENET_TXD0__ESAI1_TX4_RX1 = IOMUX_PAD(0x0504, 0x01F0, 2, 0x0884, 0, 0), + MX6_PAD_ENET_TXD0__GPIO_1_30 = IOMUX_PAD(0x0504, 0x01F0, 5, 0x0000, 0, 0), + MX6_PAD_ENET_TXD0__SATA_PHY_TCK = IOMUX_PAD(0x0504, 0x01F0, 6, 0x0000, 0, 0), + MX6_PAD_ENET_TXD0__USBPHY2_RX_FS_RXD = IOMUX_PAD(0x0504, 0x01F0, 7, 0x0000, 0, 0), + MX6_PAD_ENET_MDC__MLB_MLBDAT = IOMUX_PAD(0x0508, 0x01F4, 0, 0x0904, 0, 0), + MX6_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x0508, 0x01F4, 1, 0x0000, 0, 0), + MX6_PAD_ENET_MDC__ESAI1_TX5_RX0 = IOMUX_PAD(0x0508, 0x01F4, 2, 0x0888, 0, 0), + MX6_PAD_ENET_MDC__ENET_1588_EVENT1_IN = IOMUX_PAD(0x0508, 0x01F4, 4, 0x0000, 0, 0), + MX6_PAD_ENET_MDC__GPIO_1_31 = IOMUX_PAD(0x0508, 0x01F4, 5, 0x0000, 0, 0), + MX6_PAD_ENET_MDC__SATA_PHY_TMS = IOMUX_PAD(0x0508, 0x01F4, 6, 0x0000, 0, 0), + MX6_PAD_ENET_MDC__USBPHY2_RX_DISCON = IOMUX_PAD(0x0508, 0x01F4, 7, 0x0000, 0, 0), + MX6_PAD_DRAM_D40__MMDC_DRAM_D_40 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D41__MMDC_DRAM_D_41 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D42__MMDC_DRAM_D_42 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D43__MMDC_DRAM_D_43 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D44__MMDC_DRAM_D_44 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D45__MMDC_DRAM_D_45 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D46__MMDC_DRAM_D_46 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D47__MMDC_DRAM_D_47 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS5__MMDC_DRAM_SDQS_5 = IOMUX_PAD(0x050C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM5__MMDC_DRAM_DQM_5 = IOMUX_PAD(0x0510, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D32__MMDC_DRAM_D_32 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D33__MMDC_DRAM_D_33 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D34__MMDC_DRAM_D_34 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D35__MMDC_DRAM_D_35 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D36__MMDC_DRAM_D_36 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D37__MMDC_DRAM_D_37 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D38__MMDC_DRAM_D_38 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D39__MMDC_DRAM_D_39 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM4__MMDC_DRAM_DQM_4 = IOMUX_PAD(0x0514, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS4__MMDC_DRAM_SDQS_4 = IOMUX_PAD(0x0518, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D24__MMDC_DRAM_D_24 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D25__MMDC_DRAM_D_25 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D26__MMDC_DRAM_D_26 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D27__MMDC_DRAM_D_27 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D28__MMDC_DRAM_D_28 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D29__MMDC_DRAM_D_29 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS3__MMDC_DRAM_SDQS_3 = IOMUX_PAD(0x051C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D30__MMDC_DRAM_D_30 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D31__MMDC_DRAM_D_31 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM3__MMDC_DRAM_DQM_3 = IOMUX_PAD(0x0520, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D16__MMDC_DRAM_D_16 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D17__MMDC_DRAM_D_17 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D18__MMDC_DRAM_D_18 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D19__MMDC_DRAM_D_19 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D20__MMDC_DRAM_D_20 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D21__MMDC_DRAM_D_21 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D22__MMDC_DRAM_D_22 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS2__MMDC_DRAM_SDQS_2 = IOMUX_PAD(0x0524, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D23__MMDC_DRAM_D_23 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM2__MMDC_DRAM_DQM_2 = IOMUX_PAD(0x0528, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A0__MMDC_DRAM_A_0 = IOMUX_PAD(0x052C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A1__MMDC_DRAM_A_1 = IOMUX_PAD(0x0530, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A2__MMDC_DRAM_A_2 = IOMUX_PAD(0x0534, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A3__MMDC_DRAM_A_3 = IOMUX_PAD(0x0538, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A4__MMDC_DRAM_A_4 = IOMUX_PAD(0x053C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A5__MMDC_DRAM_A_5 = IOMUX_PAD(0x0540, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A6__MMDC_DRAM_A_6 = IOMUX_PAD(0x0544, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A7__MMDC_DRAM_A_7 = IOMUX_PAD(0x0548, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A8__MMDC_DRAM_A_8 = IOMUX_PAD(0x054C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A9__MMDC_DRAM_A_9 = IOMUX_PAD(0x0550, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A10__MMDC_DRAM_A_10 = IOMUX_PAD(0x0554, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A11__MMDC_DRAM_A_11 = IOMUX_PAD(0x0558, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A12__MMDC_DRAM_A_12 = IOMUX_PAD(0x055C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A13__MMDC_DRAM_A_13 = IOMUX_PAD(0x0560, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A14__MMDC_DRAM_A_14 = IOMUX_PAD(0x0564, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_A15__MMDC_DRAM_A_15 = IOMUX_PAD(0x0568, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_CAS__MMDC_DRAM_CAS = IOMUX_PAD(0x056C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_CS0__MMDC_DRAM_CS_0 = IOMUX_PAD(0x0570, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_CS1__MMDC_DRAM_CS_1 = IOMUX_PAD(0x0574, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_RAS__MMDC_DRAM_RAS = IOMUX_PAD(0x0578, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_RESET__MMDC_DRAM_RESET = IOMUX_PAD(0x057C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDBA0__MMDC_DRAM_SDBA_0 = IOMUX_PAD(0x0580, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDBA1__MMDC_DRAM_SDBA_1 = IOMUX_PAD(0x0584, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDCLK_0__MMDC_DRAM_SDCLK0 = IOMUX_PAD(0x0588, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDBA2__MMDC_DRAM_SDBA_2 = IOMUX_PAD(0x058C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDCKE0__MMDC_DRAM_SDCKE_0 = IOMUX_PAD(0x0590, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDCLK_1__MMDC_DRAM_SDCLK1 = IOMUX_PAD(0x0594, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDCKE1__MMDC_DRAM_SDCKE_1 = IOMUX_PAD(0x0598, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDODT0__MMDC_DRAM_ODT_0 = IOMUX_PAD(0x059C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDODT1__MMDC_DRAM_ODT_1 = IOMUX_PAD(0x05A0, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDWE__MMDC_DRAM_SDWE = IOMUX_PAD(0x05A4, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D0__MMDC_DRAM_D_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D1__MMDC_DRAM_D_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D2__MMDC_DRAM_D_2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D3__MMDC_DRAM_D_3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D4__MMDC_DRAM_D_4 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D5__MMDC_DRAM_D_5 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS0__MMDC_DRAM_SDQS_0 = IOMUX_PAD(0x05A8, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D6__MMDC_DRAM_D_6 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D7__MMDC_DRAM_D_7 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM0__MMDC_DRAM_DQM_0 = IOMUX_PAD(0x05AC, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D8__MMDC_DRAM_D_8 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D9__MMDC_DRAM_D_9 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D10__MMDC_DRAM_D_10 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D11__MMDC_DRAM_D_11 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D12__MMDC_DRAM_D_12 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D13__MMDC_DRAM_D_13 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D14__MMDC_DRAM_D_14 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS1__MMDC_DRAM_SDQS_1 = IOMUX_PAD(0x05B0, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D15__MMDC_DRAM_D_15 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM1__MMDC_DRAM_DQM_1 = IOMUX_PAD(0x05B4, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D48__MMDC_DRAM_D_48 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D49__MMDC_DRAM_D_49 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D50__MMDC_DRAM_D_50 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D51__MMDC_DRAM_D_51 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D52__MMDC_DRAM_D_52 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D53__MMDC_DRAM_D_53 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D54__MMDC_DRAM_D_54 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D55__MMDC_DRAM_D_55 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS6__MMDC_DRAM_SDQS_6 = IOMUX_PAD(0x05B8, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM6__MMDC_DRAM_DQM_6 = IOMUX_PAD(0x05BC, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D56__MMDC_DRAM_D_56 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_SDQS7__MMDC_DRAM_SDQS_7 = IOMUX_PAD(0x05C0, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D57__MMDC_DRAM_D_57 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D58__MMDC_DRAM_D_58 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D59__MMDC_DRAM_D_59 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D60__MMDC_DRAM_D_60 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_DQM7__MMDC_DRAM_DQM_7 = IOMUX_PAD(0x05C4, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D61__MMDC_DRAM_D_61 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D62__MMDC_DRAM_D_62 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_DRAM_D63__MMDC_DRAM_D_63 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_KEY_COL0__ECSPI1_SCLK = IOMUX_PAD(0x05C8, 0x01F8, 0, 0x07F4, 2, 0), + MX6_PAD_KEY_COL0__ENET_RDATA_3 = IOMUX_PAD(0x05C8, 0x01F8, 1, 0x0854, 1, 0), + MX6_PAD_KEY_COL0__AUDMUX_AUD5_TXC = IOMUX_PAD(0x05C8, 0x01F8, 2, 0x07DC, 1, 0), + MX6_PAD_KEY_COL0__KPP_COL_0 = IOMUX_PAD(0x05C8, 0x01F8, 3, 0x0000, 0, 0), + MX6_PAD_KEY_COL0__UART4_TXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0000, 0, 0), + MX6_PAD_KEY_COL0__UART4_TXD_RXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0938, 0, 0), + MX6_PAD_KEY_COL0__GPIO_4_6 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL0__DCIC1_DCIC_OUT = IOMUX_PAD(0x05C8, 0x01F8, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL0__SRC_ANY_PU_RST = IOMUX_PAD(0x05C8, 0x01F8, 7, 0x0000, 0, 0), + MX6_PAD_KEY_ROW0__ECSPI1_MOSI = IOMUX_PAD(0x05CC, 0x01FC, 0, 0x07FC, 2, 0), + MX6_PAD_KEY_ROW0__ENET_TDATA_3 = IOMUX_PAD(0x05CC, 0x01FC, 1, 0x0000, 0, 0), + MX6_PAD_KEY_ROW0__AUDMUX_AUD5_TXD = IOMUX_PAD(0x05CC, 0x01FC, 2, 0x07D0, 1, 0), + MX6_PAD_KEY_ROW0__KPP_ROW_0 = IOMUX_PAD(0x05CC, 0x01FC, 3, 0x0000, 0, 0), + MX6_PAD_KEY_ROW0__UART4_RXD = IOMUX_PAD(0x05CC, 0x01FC, 4, 0x0938, 1, 0), + MX6_PAD_KEY_ROW0__GPIO_4_7 = IOMUX_PAD(0x05CC, 0x01FC, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW0__DCIC2_DCIC_OUT = IOMUX_PAD(0x05CC, 0x01FC, 6, 0x0000, 0, 0), + MX6_PAD_KEY_ROW0__PL301_PER1_HADR_0 = IOMUX_PAD(0x05CC, 0x01FC, 7, 0x0000, 0, 0), + MX6_PAD_KEY_COL1__ECSPI1_MISO = IOMUX_PAD(0x05D0, 0x0200, 0, 0x07F8, 2, 0), + MX6_PAD_KEY_COL1__ENET_MDIO = IOMUX_PAD(0x05D0, 0x0200, 1, 0x0840, 1, 0), + MX6_PAD_KEY_COL1__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x05D0, 0x0200, 2, 0x07E0, 1, 0), + MX6_PAD_KEY_COL1__KPP_COL_1 = IOMUX_PAD(0x05D0, 0x0200, 3, 0x0000, 0, 0), + MX6_PAD_KEY_COL1__UART5_TXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0000, 0, 0), + MX6_PAD_KEY_COL1__UART5_TXD_RXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0940, 0, 0), + MX6_PAD_KEY_COL1__GPIO_4_8 = IOMUX_PAD(0x05D0, 0x0200, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL1__USDHC1_VSELECT = IOMUX_PAD(0x05D0, 0x0200, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL1__PL301MX_PER1_HADR_1 = IOMUX_PAD(0x05D0, 0x0200, 7, 0x0000, 0, 0), + MX6_PAD_KEY_ROW1__ECSPI1_SS0 = IOMUX_PAD(0x05D4, 0x0204, 0, 0x0800, 2, 0), + MX6_PAD_KEY_ROW1__ENET_COL = IOMUX_PAD(0x05D4, 0x0204, 1, 0x0000, 0, 0), + MX6_PAD_KEY_ROW1__AUDMUX_AUD5_RXD = IOMUX_PAD(0x05D4, 0x0204, 2, 0x07CC, 1, 0), + MX6_PAD_KEY_ROW1__KPP_ROW_1 = IOMUX_PAD(0x05D4, 0x0204, 3, 0x0000, 0, 0), + MX6_PAD_KEY_ROW1__UART5_RXD = IOMUX_PAD(0x05D4, 0x0204, 4, 0x0940, 1, 0), + MX6_PAD_KEY_ROW1__GPIO_4_9 = IOMUX_PAD(0x05D4, 0x0204, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW1__USDHC2_VSELECT = IOMUX_PAD(0x05D4, 0x0204, 6, 0x0000, 0, 0), + MX6_PAD_KEY_ROW1__PL301_PER1_HADDR_2 = IOMUX_PAD(0x05D4, 0x0204, 7, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__ECSPI1_SS1 = IOMUX_PAD(0x05D8, 0x0208, 0, 0x0804, 2, 0), + MX6_PAD_KEY_COL2__ENET_RDATA_2 = IOMUX_PAD(0x05D8, 0x0208, 1, 0x0850, 1, 0), + MX6_PAD_KEY_COL2__CAN1_TXCAN = IOMUX_PAD(0x05D8, 0x0208, 2, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__KPP_COL_2 = IOMUX_PAD(0x05D8, 0x0208, 3, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__ENET_MDC = IOMUX_PAD(0x05D8, 0x0208, 4, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__GPIO_4_10 = IOMUX_PAD(0x05D8, 0x0208, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__USBOH3_H1_PWRCTL_WKP = IOMUX_PAD(0x05D8, 0x0208, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL2__PL301_PER1_HADDR_3 = IOMUX_PAD(0x05D8, 0x0208, 7, 0x0000, 0, 0), + MX6_PAD_KEY_ROW2__ECSPI1_SS2 = IOMUX_PAD(0x05DC, 0x020C, 0, 0x0808, 1, 0), + MX6_PAD_KEY_ROW2__ENET_TDATA_2 = IOMUX_PAD(0x05DC, 0x020C, 1, 0x0000, 0, 0), + MX6_PAD_KEY_ROW2__CAN1_RXCAN = IOMUX_PAD(0x05DC, 0x020C, 2, 0x07E4, 0, 0), + MX6_PAD_KEY_ROW2__KPP_ROW_2 = IOMUX_PAD(0x05DC, 0x020C, 3, 0x0000, 0, 0), + MX6_PAD_KEY_ROW2__USDHC2_VSELECT = IOMUX_PAD(0x05DC, 0x020C, 4, 0x0000, 0, 0), + MX6_PAD_KEY_ROW2__GPIO_4_11 = IOMUX_PAD(0x05DC, 0x020C, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW2__HDMI_TX_CEC_LINE = IOMUX_PAD(0x05DC, 0x020C, 6, 0x088C, 1, 0), + MX6_PAD_KEY_ROW2__PL301_PER1_HADR_4 = IOMUX_PAD(0x05DC, 0x020C, 7, 0x0000, 0, 0), + MX6_PAD_KEY_COL3__ECSPI1_SS3 = IOMUX_PAD(0x05E0, 0x0210, 0, 0x080C, 1, 0), + MX6_PAD_KEY_COL3__ENET_CRS = IOMUX_PAD(0x05E0, 0x0210, 1, 0x0000, 0, 0), + MX6_PAD_KEY_COL3__HDMI_TX_DDC_SCL = IOMUX_PAD(0x05E0, 0x0210, 2, 0x0890, 1, 0), + MX6_PAD_KEY_COL3__KPP_COL_3 = IOMUX_PAD(0x05E0, 0x0210, 3, 0x0000, 0, 0), + MX6_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x05E0, 0x0210, 20, 0x08A0, 1, 0), + MX6_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x05E0, 0x0210, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL3__SPDIF_IN1 = IOMUX_PAD(0x05E0, 0x0210, 6, 0x0914, 2, 0), + MX6_PAD_KEY_COL3__PL301_PER1_HADR_5 = IOMUX_PAD(0x05E0, 0x0210, 7, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__OSC32K_32K_OUT = IOMUX_PAD(0x05E4, 0x0214, 0, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05E4, 0x0214, 1, 0x07B0, 0, 0), + MX6_PAD_KEY_ROW3__HDMI_TX_DDC_SDA = IOMUX_PAD(0x05E4, 0x0214, 2, 0x0894, 1, 0), + MX6_PAD_KEY_ROW3__KPP_ROW_3 = IOMUX_PAD(0x05E4, 0x0214, 3, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x05E4, 0x0214, 20, 0x08A4, 1, 0), + MX6_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__USDHC1_VSELECT = IOMUX_PAD(0x05E4, 0x0214, 6, 0x0000, 0, 0), + MX6_PAD_KEY_ROW3__PL301_PER1_HADR_6 = IOMUX_PAD(0x05E4, 0x0214, 7, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__CAN2_TXCAN = IOMUX_PAD(0x05E8, 0x0218, 0, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__IPU1_SISG_4 = IOMUX_PAD(0x05E8, 0x0218, 1, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__USBOH3_USBOTG_OC = IOMUX_PAD(0x05E8, 0x0218, 2, 0x0944, 1, 0), + MX6_PAD_KEY_COL4__KPP_COL_4 = IOMUX_PAD(0x05E8, 0x0218, 3, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__UART5_CTS = IOMUX_PAD(0x05E8, 0x0218, 4, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__UART5_RTS = IOMUX_PAD(0x05E8, 0x0218, 4, 0x093C, 0, 0), + MX6_PAD_KEY_COL4__GPIO_4_14 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__MMDC_DEBUG_49 = IOMUX_PAD(0x05E8, 0x0218, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL4__PL301_PER1_HADDR_7 = IOMUX_PAD(0x05E8, 0x0218, 7, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__CAN2_RXCAN = IOMUX_PAD(0x05EC, 0x021C, 0, 0x07E8, 0, 0), + MX6_PAD_KEY_ROW4__IPU1_SISG_5 = IOMUX_PAD(0x05EC, 0x021C, 1, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__USBOH3_USBOTG_PWR = IOMUX_PAD(0x05EC, 0x021C, 2, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__KPP_ROW_4 = IOMUX_PAD(0x05EC, 0x021C, 3, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__UART5_CTS = IOMUX_PAD(0x05EC, 0x021C, 4, 0x093C, 1, 0), + MX6_PAD_KEY_ROW4__GPIO_4_15 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__MMDC_DEBUG_50 = IOMUX_PAD(0x05EC, 0x021C, 6, 0x0000, 0, 0), + MX6_PAD_KEY_ROW4__PL301_PER1_HADR_8 = IOMUX_PAD(0x05EC, 0x021C, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_0__CCM_CLKO = IOMUX_PAD(0x05F0, 0x0220, 0, 0x0000, 0, 0), + MX6_PAD_GPIO_0__KPP_COL_5 = IOMUX_PAD(0x05F0, 0x0220, 2, 0x08E8, 0, 0), + MX6_PAD_GPIO_0__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05F0, 0x0220, 3, 0x07B0, 1, 0), + MX6_PAD_GPIO_0__EPIT1_EPITO = IOMUX_PAD(0x05F0, 0x0220, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_0__GPIO_1_0 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_0__USBOH3_USBH1_PWR = IOMUX_PAD(0x05F0, 0x0220, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_0__SNVS_HP_WRAP_SNVS_VIO5 = IOMUX_PAD(0x05F0, 0x0220, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x05F4, 0x0224, 0, 0x086C, 1, 0), + MX6_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x05F4, 0x0224, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x05F4, 0x0224, 2, 0x08F4, 0, 0), + MX6_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x05F4, 0x0224, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_1__GPIO_1_1 = IOMUX_PAD(0x05F4, 0x0224, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05F4, 0x0224, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_1__SRC_TESTER_ACK = IOMUX_PAD(0x05F4, 0x0224, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_9__ESAI1_FSR = IOMUX_PAD(0x05F8, 0x0228, 0, 0x085C, 1, 0), + MX6_PAD_GPIO_9__WDOG1_WDOG_B = IOMUX_PAD(0x05F8, 0x0228, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_9__KPP_COL_6 = IOMUX_PAD(0x05F8, 0x0228, 2, 0x08EC, 0, 0), + MX6_PAD_GPIO_9__CCM_REF_EN_B = IOMUX_PAD(0x05F8, 0x0228, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_9__PWM1_PWMO = IOMUX_PAD(0x05F8, 0x0228, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_9__GPIO_1_9 = IOMUX_PAD(0x05F8, 0x0228, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_9__USDHC1_WP = IOMUX_PAD(0x05F8, 0x0228, 6, 0x094C, 1, 0), + MX6_PAD_GPIO_9__SRC_EARLY_RST = IOMUX_PAD(0x05F8, 0x0228, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_3__ESAI1_HCKR = IOMUX_PAD(0x05FC, 0x022C, 0, 0x0864, 1, 0), + MX6_PAD_GPIO_3__OBSERVE_MUX_INT_OUT0 = IOMUX_PAD(0x05FC, 0x022C, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_3__I2C3_SCL = IOMUX_PAD(0x05FC, 0x022C, 18, 0x08A8, 1, 0), + MX6_PAD_GPIO_3__ANATOP_24M_OUT = IOMUX_PAD(0x05FC, 0x022C, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_3__CCM_CLKO2 = IOMUX_PAD(0x05FC, 0x022C, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_3__GPIO_1_3 = IOMUX_PAD(0x05FC, 0x022C, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_3__USBOH3_USBH1_OC = IOMUX_PAD(0x05FC, 0x022C, 6, 0x0948, 1, 0), + MX6_PAD_GPIO_3__MLB_MLBCLK = IOMUX_PAD(0x05FC, 0x022C, 7, 0x0900, 1, 0), + MX6_PAD_GPIO_6__ESAI1_SCKT = IOMUX_PAD(0x0600, 0x0230, 0, 0x0870, 1, 0), + MX6_PAD_GPIO_6__OBSERVE_MUX_INT_OUT1 = IOMUX_PAD(0x0600, 0x0230, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_6__I2C3_SDA = IOMUX_PAD(0x0600, 0x0230, 18, 0x08AC, 1, 0), + MX6_PAD_GPIO_6__CCM_CCM_OUT_0 = IOMUX_PAD(0x0600, 0x0230, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_6__CSU_CSU_INT_DEB = IOMUX_PAD(0x0600, 0x0230, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_6__GPIO_1_6 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_6__USDHC2_LCTL = IOMUX_PAD(0x0600, 0x0230, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_6__MLB_MLBSIG = IOMUX_PAD(0x0600, 0x0230, 7, 0x0908, 1, 0), + MX6_PAD_GPIO_2__ESAI1_FST = IOMUX_PAD(0x0604, 0x0234, 0, 0x0860, 1, 0), + MX6_PAD_GPIO_2__OBSERVE_MUX_INT_OUT2 = IOMUX_PAD(0x0604, 0x0234, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_2__KPP_ROW_6 = IOMUX_PAD(0x0604, 0x0234, 2, 0x08F8, 1, 0), + MX6_PAD_GPIO_2__CCM_CCM_OUT_1 = IOMUX_PAD(0x0604, 0x0234, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 = IOMUX_PAD(0x0604, 0x0234, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_2__GPIO_1_2 = IOMUX_PAD(0x0604, 0x0234, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_2__USDHC2_WP = IOMUX_PAD(0x0604, 0x0234, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_2__MLB_MLBDAT = IOMUX_PAD(0x0604, 0x0234, 7, 0x0904, 1, 0), + MX6_PAD_GPIO_4__ESAI1_HCKT = IOMUX_PAD(0x0608, 0x0238, 0, 0x0868, 1, 0), + MX6_PAD_GPIO_4__OBSERVE_MUX_INT_OUT3 = IOMUX_PAD(0x0608, 0x0238, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_4__KPP_COL_7 = IOMUX_PAD(0x0608, 0x0238, 2, 0x08F0, 1, 0), + MX6_PAD_GPIO_4__CCM_CCM_OUT_2 = IOMUX_PAD(0x0608, 0x0238, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 = IOMUX_PAD(0x0608, 0x0238, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_4__GPIO_1_4 = IOMUX_PAD(0x0608, 0x0238, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_4__USDHC2_CD = IOMUX_PAD(0x0608, 0x0238, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_4__OCOTP_CRL_WRAR_FUSE_LA = IOMUX_PAD(0x0608, 0x0238, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_5__ESAI1_TX2_RX3 = IOMUX_PAD(0x060C, 0x023C, 0, 0x087C, 1, 0), + MX6_PAD_GPIO_5__OBSERVE_MUX_INT_OUT4 = IOMUX_PAD(0x060C, 0x023C, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_5__KPP_ROW_7 = IOMUX_PAD(0x060C, 0x023C, 2, 0x08FC, 1, 0), + MX6_PAD_GPIO_5__CCM_CLKO = IOMUX_PAD(0x060C, 0x023C, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 = IOMUX_PAD(0x060C, 0x023C, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x060C, 0x023C, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x060C, 0x023C, 22, 0x08A8, 2, 0), + MX6_PAD_GPIO_5__CHEETAH_EVENTI = IOMUX_PAD(0x060C, 0x023C, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_7__ESAI1_TX4_RX1 = IOMUX_PAD(0x0610, 0x0240, 0, 0x0884, 1, 0), + MX6_PAD_GPIO_7__ECSPI5_RDY = IOMUX_PAD(0x0610, 0x0240, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_7__EPIT1_EPITO = IOMUX_PAD(0x0610, 0x0240, 2, 0x0000, 0, 0), + MX6_PAD_GPIO_7__CAN1_TXCAN = IOMUX_PAD(0x0610, 0x0240, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_7__UART2_TXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_7__UART2_TXD_RXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0928, 2, 0), + MX6_PAD_GPIO_7__GPIO_1_7 = IOMUX_PAD(0x0610, 0x0240, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_7__SPDIF_PLOCK = IOMUX_PAD(0x0610, 0x0240, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_7__USBOH3_OTGUSB_HST_MODE = IOMUX_PAD(0x0610, 0x0240, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_8__ESAI1_TX5_RX0 = IOMUX_PAD(0x0614, 0x0244, 0, 0x0888, 1, 0), + MX6_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT = IOMUX_PAD(0x0614, 0x0244, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_8__EPIT2_EPITO = IOMUX_PAD(0x0614, 0x0244, 2, 0x0000, 0, 0), + MX6_PAD_GPIO_8__CAN1_RXCAN = IOMUX_PAD(0x0614, 0x0244, 3, 0x07E4, 1, 0), + MX6_PAD_GPIO_8__UART2_RXD = IOMUX_PAD(0x0614, 0x0244, 4, 0x0928, 3, 0), + MX6_PAD_GPIO_8__GPIO_1_8 = IOMUX_PAD(0x0614, 0x0244, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_8__SPDIF_SRCLK = IOMUX_PAD(0x0614, 0x0244, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_8__USBOH3_OTG_PWRCTL_WAK = IOMUX_PAD(0x0614, 0x0244, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_16__ESAI1_TX3_RX2 = IOMUX_PAD(0x0618, 0x0248, 0, 0x0880, 1, 0), + MX6_PAD_GPIO_16__ENET_1588_EVENT2_IN = IOMUX_PAD(0x0618, 0x0248, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_16__ENET_ETHERNET_REF_OUT = IOMUX_PAD(0x0618, 0x0248, 2, 0x083C, 1, 0), + MX6_PAD_GPIO_16__USDHC1_LCTL = IOMUX_PAD(0x0618, 0x0248, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_16__SPDIF_IN1 = IOMUX_PAD(0x0618, 0x0248, 4, 0x0914, 3, 0), + MX6_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x0618, 0x0248, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x0618, 0x0248, 22, 0x08AC, 2, 0), + MX6_PAD_GPIO_16__SJC_DE_B = IOMUX_PAD(0x0618, 0x0248, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_17__ESAI1_TX0 = IOMUX_PAD(0x061C, 0x024C, 0, 0x0874, 0, 0), + MX6_PAD_GPIO_17__ENET_1588_EVENT3_IN = IOMUX_PAD(0x061C, 0x024C, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_17__CCM_PMIC_RDY = IOMUX_PAD(0x061C, 0x024C, 2, 0x07F0, 1, 0), + MX6_PAD_GPIO_17__SDMA_SDMA_EXT_EVENT_0 = IOMUX_PAD(0x061C, 0x024C, 3, 0x090C, 1, 0), + MX6_PAD_GPIO_17__SPDIF_OUT1 = IOMUX_PAD(0x061C, 0x024C, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x061C, 0x024C, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_17__SJC_JTAG_ACT = IOMUX_PAD(0x061C, 0x024C, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_18__ESAI1_TX1 = IOMUX_PAD(0x0620, 0x0250, 0, 0x0878, 0, 0), + MX6_PAD_GPIO_18__ENET_RX_CLK = IOMUX_PAD(0x0620, 0x0250, 1, 0x0844, 1, 0), + MX6_PAD_GPIO_18__USDHC3_VSELECT = IOMUX_PAD(0x0620, 0x0250, 2, 0x0000, 0, 0), + MX6_PAD_GPIO_18__SDMA_SDMA_EXT_EVENT_1 = IOMUX_PAD(0x0620, 0x0250, 3, 0x0910, 1, 0), + MX6_PAD_GPIO_18__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x0620, 0x0250, 4, 0x07B0, 2, 0), + MX6_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x0620, 0x0250, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_18__SNVS_HP_WRA_SNVS_VIO5 = IOMUX_PAD(0x0620, 0x0250, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_18__SRC_SYSTEM_RST = IOMUX_PAD(0x0620, 0x0250, 7, 0x0000, 0, 0), + MX6_PAD_GPIO_19__KPP_COL_5 = IOMUX_PAD(0x0624, 0x0254, 0, 0x08E8, 1, 0), + MX6_PAD_GPIO_19__ENET_1588_EVENT0_OUT = IOMUX_PAD(0x0624, 0x0254, 1, 0x0000, 0, 0), + MX6_PAD_GPIO_19__SPDIF_OUT1 = IOMUX_PAD(0x0624, 0x0254, 2, 0x0000, 0, 0), + MX6_PAD_GPIO_19__CCM_CLKO = IOMUX_PAD(0x0624, 0x0254, 3, 0x0000, 0, 0), + MX6_PAD_GPIO_19__ECSPI1_RDY = IOMUX_PAD(0x0624, 0x0254, 4, 0x0000, 0, 0), + MX6_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x0624, 0x0254, 5, 0x0000, 0, 0), + MX6_PAD_GPIO_19__ENET_TX_ER = IOMUX_PAD(0x0624, 0x0254, 6, 0x0000, 0, 0), + MX6_PAD_GPIO_19__SRC_INT_BOOT = IOMUX_PAD(0x0624, 0x0254, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK = IOMUX_PAD(0x0628, 0x0258, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_PIXCLK__PCIE_CTRL_MUX_12 = IOMUX_PAD(0x0628, 0x0258, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 = IOMUX_PAD(0x0628, 0x0258, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_PIXCLK__GPIO_5_18 = IOMUX_PAD(0x0628, 0x0258, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_PIXCLK___MMDC_DEBUG_29 = IOMUX_PAD(0x0628, 0x0258, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_PIXCLK__CHEETAH_EVENTO = IOMUX_PAD(0x0628, 0x0258, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC = IOMUX_PAD(0x062C, 0x025C, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_MCLK__PCIE_CTRL_MUX_13 = IOMUX_PAD(0x062C, 0x025C, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_MCLK__CCM_CLKO = IOMUX_PAD(0x062C, 0x025C, 3, 0x0000, 0, 0), + MX6_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 = IOMUX_PAD(0x062C, 0x025C, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_MCLK__GPIO_5_19 = IOMUX_PAD(0x062C, 0x025C, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_MCLK__MMDC_MMDC_DEBUG_30 = IOMUX_PAD(0x062C, 0x025C, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_MCLK__CHEETAH_TRCTL = IOMUX_PAD(0x062C, 0x025C, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DATA_EN__IPU1_CSI0_DA_EN = IOMUX_PAD(0x0630, 0x0260, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DATA_EN__WEIM_WEIM_D_0 = IOMUX_PAD(0x0630, 0x0260, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DATA_EN__PCIE_CTRL_MUX_14 = IOMUX_PAD(0x0630, 0x0260, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 = IOMUX_PAD(0x0630, 0x0260, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DATA_EN__GPIO_5_20 = IOMUX_PAD(0x0630, 0x0260, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DATA_EN__MMDC_DEBUG_31 = IOMUX_PAD(0x0630, 0x0260, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DATA_EN__CHEETAH_TRCLK = IOMUX_PAD(0x0630, 0x0260, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC = IOMUX_PAD(0x0634, 0x0264, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_VSYNC__WEIM_WEIM_D_1 = IOMUX_PAD(0x0634, 0x0264, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_VSYNC__PCIE_CTRL_MUX_15 = IOMUX_PAD(0x0634, 0x0264, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 = IOMUX_PAD(0x0634, 0x0264, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_VSYNC__GPIO_5_21 = IOMUX_PAD(0x0634, 0x0264, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_VSYNC__MMDC_DEBUG_32 = IOMUX_PAD(0x0634, 0x0264, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_VSYNC__CHEETAH_TRACE_0 = IOMUX_PAD(0x0634, 0x0264, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT4__IPU1_CSI0_D_4 = IOMUX_PAD(0x0638, 0x0268, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT4__WEIM_WEIM_D_2 = IOMUX_PAD(0x0638, 0x0268, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT4__ECSPI1_SCLK = IOMUX_PAD(0x0638, 0x0268, 2, 0x07F4, 3, 0), + MX6_PAD_CSI0_DAT4__KPP_COL_5 = IOMUX_PAD(0x0638, 0x0268, 3, 0x08E8, 2, 0), + MX6_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC = IOMUX_PAD(0x0638, 0x0268, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT4__GPIO_5_22 = IOMUX_PAD(0x0638, 0x0268, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT4__MMDC_DEBUG_43 = IOMUX_PAD(0x0638, 0x0268, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT4__CHEETAH_TRACE_1 = IOMUX_PAD(0x0638, 0x0268, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT5__IPU1_CSI0_D_5 = IOMUX_PAD(0x063C, 0x026C, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT5__WEIM_WEIM_D_3 = IOMUX_PAD(0x063C, 0x026C, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT5__ECSPI1_MOSI = IOMUX_PAD(0x063C, 0x026C, 2, 0x07FC, 3, 0), + MX6_PAD_CSI0_DAT5__KPP_ROW_5 = IOMUX_PAD(0x063C, 0x026C, 3, 0x08F4, 1, 0), + MX6_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD = IOMUX_PAD(0x063C, 0x026C, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT5__GPIO_5_23 = IOMUX_PAD(0x063C, 0x026C, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT5__MMDC_MMDC_DEBUG_44 = IOMUX_PAD(0x063C, 0x026C, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT5__CHEETAH_TRACE_2 = IOMUX_PAD(0x063C, 0x026C, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT6__IPU1_CSI0_D_6 = IOMUX_PAD(0x0640, 0x0270, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT6__WEIM_WEIM_D_4 = IOMUX_PAD(0x0640, 0x0270, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT6__ECSPI1_MISO = IOMUX_PAD(0x0640, 0x0270, 2, 0x07F8, 3, 0), + MX6_PAD_CSI0_DAT6__KPP_COL_6 = IOMUX_PAD(0x0640, 0x0270, 3, 0x08EC, 1, 0), + MX6_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS = IOMUX_PAD(0x0640, 0x0270, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT6__GPIO_5_24 = IOMUX_PAD(0x0640, 0x0270, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT6__MMDC_MMDC_DEBUG_45 = IOMUX_PAD(0x0640, 0x0270, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT6__CHEETAH_TRACE_3 = IOMUX_PAD(0x0640, 0x0270, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT7__IPU1_CSI0_D_7 = IOMUX_PAD(0x0644, 0x0274, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT7__WEIM_WEIM_D_5 = IOMUX_PAD(0x0644, 0x0274, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT7__ECSPI1_SS0 = IOMUX_PAD(0x0644, 0x0274, 2, 0x0800, 3, 0), + MX6_PAD_CSI0_DAT7__KPP_ROW_6 = IOMUX_PAD(0x0644, 0x0274, 3, 0x08F8, 2, 0), + MX6_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD = IOMUX_PAD(0x0644, 0x0274, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT7__GPIO_5_25 = IOMUX_PAD(0x0644, 0x0274, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT7__MMDC_MMDC_DEBUG_46 = IOMUX_PAD(0x0644, 0x0274, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT7__CHEETAH_TRACE_4 = IOMUX_PAD(0x0644, 0x0274, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT8__IPU1_CSI0_D_8 = IOMUX_PAD(0x0648, 0x0278, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT8__WEIM_WEIM_D_6 = IOMUX_PAD(0x0648, 0x0278, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT8__ECSPI2_SCLK = IOMUX_PAD(0x0648, 0x0278, 2, 0x0810, 2, 0), + MX6_PAD_CSI0_DAT8__KPP_COL_7 = IOMUX_PAD(0x0648, 0x0278, 3, 0x08F0, 2, 0), + MX6_PAD_CSI0_DAT8__I2C1_SDA = IOMUX_PAD(0x0648, 0x0278, 20, 0x089C, 1, 0), + MX6_PAD_CSI0_DAT8__GPIO_5_26 = IOMUX_PAD(0x0648, 0x0278, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT8__MMDC_MMDC_DEBUG_47 = IOMUX_PAD(0x0648, 0x0278, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT8__CHEETAH_TRACE_5 = IOMUX_PAD(0x0648, 0x0278, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT9__IPU1_CSI0_D_9 = IOMUX_PAD(0x064C, 0x027C, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT9__WEIM_WEIM_D_7 = IOMUX_PAD(0x064C, 0x027C, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT9__ECSPI2_MOSI = IOMUX_PAD(0x064C, 0x027C, 2, 0x0818, 2, 0), + MX6_PAD_CSI0_DAT9__KPP_ROW_7 = IOMUX_PAD(0x064C, 0x027C, 3, 0x08FC, 2, 0), + MX6_PAD_CSI0_DAT9__I2C1_SCL = IOMUX_PAD(0x064C, 0x027C, 20, 0x0898, 1, 0), + MX6_PAD_CSI0_DAT9__GPIO_5_27 = IOMUX_PAD(0x064C, 0x027C, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT9__MMDC_MMDC_DEBUG_48 = IOMUX_PAD(0x064C, 0x027C, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT9__CHEETAH_TRACE_6 = IOMUX_PAD(0x064C, 0x027C, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT10__IPU1_CSI0_D_10 = IOMUX_PAD(0x0650, 0x0280, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC = IOMUX_PAD(0x0650, 0x0280, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT10__ECSPI2_MISO = IOMUX_PAD(0x0650, 0x0280, 2, 0x0814, 2, 0), + MX6_PAD_CSI0_DAT10__UART1_TXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT10__UART1_TXD_RXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0920, 0, 0), + MX6_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 = IOMUX_PAD(0x0650, 0x0280, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT10__GPIO_5_28 = IOMUX_PAD(0x0650, 0x0280, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT10__MMDC_MMDC_DEBUG_33 = IOMUX_PAD(0x0650, 0x0280, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT10__CHEETAH_TRACE_7 = IOMUX_PAD(0x0650, 0x0280, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT11__IPU1_CSI0_D_11 = IOMUX_PAD(0x0654, 0x0284, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS = IOMUX_PAD(0x0654, 0x0284, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT11__ECSPI2_SS0 = IOMUX_PAD(0x0654, 0x0284, 2, 0x081C, 2, 0), + MX6_PAD_CSI0_DAT11__UART1_RXD = IOMUX_PAD(0x0654, 0x0284, 3, 0x0920, 1, 0), + MX6_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 = IOMUX_PAD(0x0654, 0x0284, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT11__GPIO_5_29 = IOMUX_PAD(0x0654, 0x0284, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT11__MMDC_MMDC_DEBUG_34 = IOMUX_PAD(0x0654, 0x0284, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT11__CHEETAH_TRACE_8 = IOMUX_PAD(0x0654, 0x0284, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__IPU1_CSI0_D_12 = IOMUX_PAD(0x0658, 0x0288, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__WEIM_WEIM_D_8 = IOMUX_PAD(0x0658, 0x0288, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__PCIE_CTRL_MUX_16 = IOMUX_PAD(0x0658, 0x0288, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__UART4_TXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__UART4_TXD_RXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0938, 2, 0), + MX6_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 = IOMUX_PAD(0x0658, 0x0288, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__GPIO_5_30 = IOMUX_PAD(0x0658, 0x0288, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__MMDC_MMDC_DEBUG_35 = IOMUX_PAD(0x0658, 0x0288, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT12__CHEETAH_TRACE_9 = IOMUX_PAD(0x0658, 0x0288, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT13__IPU1_CSI0_D_13 = IOMUX_PAD(0x065C, 0x028C, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT13__WEIM_WEIM_D_9 = IOMUX_PAD(0x065C, 0x028C, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT13__PCIE_CTRL_MUX_17 = IOMUX_PAD(0x065C, 0x028C, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT13__UART4_RXD = IOMUX_PAD(0x065C, 0x028C, 3, 0x0938, 3, 0), + MX6_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 = IOMUX_PAD(0x065C, 0x028C, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT13__GPIO_5_31 = IOMUX_PAD(0x065C, 0x028C, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT13__MMDC_MMDC_DEBUG_36 = IOMUX_PAD(0x065C, 0x028C, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT13__CHEETAH_TRACE_10 = IOMUX_PAD(0x065C, 0x028C, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__IPU1_CSI0_D_14 = IOMUX_PAD(0x0660, 0x0290, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__WEIM_WEIM_D_10 = IOMUX_PAD(0x0660, 0x0290, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__PCIE_CTRL_MUX_18 = IOMUX_PAD(0x0660, 0x0290, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__UART5_TXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__UART5_TXD_RXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0940, 2, 0), + MX6_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 = IOMUX_PAD(0x0660, 0x0290, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__GPIO_6_0 = IOMUX_PAD(0x0660, 0x0290, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__MMDC_MMDC_DEBUG_37 = IOMUX_PAD(0x0660, 0x0290, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT14__CHEETAH_TRACE_11 = IOMUX_PAD(0x0660, 0x0290, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT15__IPU1_CSI0_D_15 = IOMUX_PAD(0x0664, 0x0294, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT15__WEIM_WEIM_D_11 = IOMUX_PAD(0x0664, 0x0294, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT15__PCIE_CTRL_MUX_19 = IOMUX_PAD(0x0664, 0x0294, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT15__UART5_RXD = IOMUX_PAD(0x0664, 0x0294, 3, 0x0940, 3, 0), + MX6_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 = IOMUX_PAD(0x0664, 0x0294, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT15__GPIO_6_1 = IOMUX_PAD(0x0664, 0x0294, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT15__MMDC_MMDC_DEBUG_38 = IOMUX_PAD(0x0664, 0x0294, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT15__CHEETAH_TRACE_12 = IOMUX_PAD(0x0664, 0x0294, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__IPU1_CSI0_D_16 = IOMUX_PAD(0x0668, 0x0298, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__WEIM_WEIM_D_12 = IOMUX_PAD(0x0668, 0x0298, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__PCIE_CTRL_MUX_20 = IOMUX_PAD(0x0668, 0x0298, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__UART4_CTS = IOMUX_PAD(0x0668, 0x0298, 3, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__UART4_RTS = IOMUX_PAD(0x0668, 0x0298, 3, 0x0934, 0, 0), + MX6_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 = IOMUX_PAD(0x0668, 0x0298, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__GPIO_6_2 = IOMUX_PAD(0x0668, 0x0298, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__MMDC_MMDC_DEBUG_39 = IOMUX_PAD(0x0668, 0x0298, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT16__CHEETAH_TRACE_13 = IOMUX_PAD(0x0668, 0x0298, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT17__IPU1_CSI0_D_17 = IOMUX_PAD(0x066C, 0x029C, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT17__WEIM_WEIM_D_13 = IOMUX_PAD(0x066C, 0x029C, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT17__PCIE_CTRL_MUX_21 = IOMUX_PAD(0x066C, 0x029C, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT17__UART4_CTS = IOMUX_PAD(0x066C, 0x029C, 3, 0x0934, 1, 0), + MX6_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 = IOMUX_PAD(0x066C, 0x029C, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT17__GPIO_6_3 = IOMUX_PAD(0x066C, 0x029C, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT17__MMDC_MMDC_DEBUG_40 = IOMUX_PAD(0x066C, 0x029C, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT17__CHEETAH_TRACE_14 = IOMUX_PAD(0x066C, 0x029C, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__IPU1_CSI0_D_18 = IOMUX_PAD(0x0670, 0x02A0, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__WEIM_WEIM_D_14 = IOMUX_PAD(0x0670, 0x02A0, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__PCIE_CTRL_MUX_22 = IOMUX_PAD(0x0670, 0x02A0, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__UART5_CTS = IOMUX_PAD(0x0670, 0x02A0, 3, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__UART5_RTS = IOMUX_PAD(0x0670, 0x02A0, 3, 0x093C, 2, 0), + MX6_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 = IOMUX_PAD(0x0670, 0x02A0, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__GPIO_6_4 = IOMUX_PAD(0x0670, 0x02A0, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__MMDC_MMDC_DEBUG_41 = IOMUX_PAD(0x0670, 0x02A0, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT18__CHEETAH_TRACE_15 = IOMUX_PAD(0x0670, 0x02A0, 7, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT19__IPU1_CSI0_D_19 = IOMUX_PAD(0x0674, 0x02A4, 0, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT19__WEIM_WEIM_D_15 = IOMUX_PAD(0x0674, 0x02A4, 1, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT19__PCIE_CTRL_MUX_23 = IOMUX_PAD(0x0674, 0x02A4, 2, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT19__UART5_CTS = IOMUX_PAD(0x0674, 0x02A4, 3, 0x093C, 3, 0), + MX6_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 = IOMUX_PAD(0x0674, 0x02A4, 4, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT19__GPIO_6_5 = IOMUX_PAD(0x0674, 0x02A4, 5, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT19__MMDC_MMDC_DEBUG_42 = IOMUX_PAD(0x0674, 0x02A4, 6, 0x0000, 0, 0), + MX6_PAD_CSI0_DAT19__ANATOP_TESTO_9 = IOMUX_PAD(0x0674, 0x02A4, 7, 0x0000, 0, 0), + MX6_PAD_JTAG_TMS__SJC_TMS = IOMUX_PAD(0x0678, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_MOD__SJC_MOD = IOMUX_PAD(0x067C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_TRSTB__SJC_TRSTB = IOMUX_PAD(0x0680, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_TDI__SJC_TDI = IOMUX_PAD(0x0684, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_TCK__SJC_TCK = IOMUX_PAD(0x0688, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_JTAG_TDO__SJC_TDO = IOMUX_PAD(0x068C, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_TAMPER__SNVS_LP_WRAP_SNVS_TD1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_PMIC_ON_REQ__SNVS_LPWRAP_WKALM = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_PMIC_STBY_REQ__CCM_PMIC_STBYRQ = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_POR_B__SRC_POR_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_BOOT_MODE1__SRC_BOOT_MODE_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_RESET_IN_B__SRC_RESET_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_BOOT_MODE0__SRC_BOOT_MODE_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_TEST_MODE__TCU_TEST_MODE = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__USDHC3_DAT7 = IOMUX_PAD(0x0690, 0x02A8, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__UART1_TXD_RXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0920, 2, 0), + MX6_PAD_SD3_DAT7__PCIE_CTRL_MUX_24 = IOMUX_PAD(0x0690, 0x02A8, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__USBOH3_UH3_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__USBOH3_UH2_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__GPIO_6_17 = IOMUX_PAD(0x0690, 0x02A8, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__MIPI_CORE_DPHY_IN_12 = IOMUX_PAD(0x0690, 0x02A8, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT7__USBPHY2_CLK20DIV = IOMUX_PAD(0x0690, 0x02A8, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__USDHC3_DAT6 = IOMUX_PAD(0x0694, 0x02AC, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0920, 3, 0), + MX6_PAD_SD3_DAT6__PCIE_CTRL_MUX_25 = IOMUX_PAD(0x0694, 0x02AC, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__USBOH3_UH3_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__USBOH3_UH2_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__GPIO_6_18 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__MIPI_CORE_DPHY_IN_13 = IOMUX_PAD(0x0694, 0x02AC, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT6__ANATOP_TESTO_10 = IOMUX_PAD(0x0694, 0x02AC, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__USDHC3_DAT5 = IOMUX_PAD(0x0698, 0x02B0, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__UART2_TXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__UART2_TXD_RXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0928, 4, 0), + MX6_PAD_SD3_DAT5__PCIE_CTRL_MUX_26 = IOMUX_PAD(0x0698, 0x02B0, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__USBOH3_UH3_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__USBOH3_UH2_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__MIPI_CORE_DPHY_IN_14 = IOMUX_PAD(0x0698, 0x02B0, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT5__ANATOP_TESTO_11 = IOMUX_PAD(0x0698, 0x02B0, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DAT4__USDHC3_DAT4 = IOMUX_PAD(0x069C, 0x02B4, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT4__UART2_RXD = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0928, 5, 0), + MX6_PAD_SD3_DAT4__PCIE_CTRL_MUX_27 = IOMUX_PAD(0x069C, 0x02B4, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DAT4__USBOH3_UH3_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT4__USBOH3_UH2_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT4__GPIO_7_1 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT4__MIPI_CORE_DPHY_IN_15 = IOMUX_PAD(0x069C, 0x02B4, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT4__ANATOP_TESTO_12 = IOMUX_PAD(0x069C, 0x02B4, 7, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06A0, 0x02B8, 16, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__UART2_CTS = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0924, 2, 0), + MX6_PAD_SD3_CMD__CAN1_TXCAN = IOMUX_PAD(0x06A0, 0x02B8, 2, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__USBOH3_UH3_DFD_OUT_4 = IOMUX_PAD(0x06A0, 0x02B8, 3, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__USBOH3_UH2_DFD_OUT_4 = IOMUX_PAD(0x06A0, 0x02B8, 4, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__GPIO_7_2 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__MIPI_CORE_DPHY_IN_16 = IOMUX_PAD(0x06A0, 0x02B8, 6, 0x0000, 0, 0), + MX6_PAD_SD3_CMD__ANATOP_TESTO_13 = IOMUX_PAD(0x06A0, 0x02B8, 7, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06A4, 0x02BC, 0, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__UART2_CTS = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__UART2_RTS = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0924, 3, 0), + MX6_PAD_SD3_CLK__CAN1_RXCAN = IOMUX_PAD(0x06A4, 0x02BC, 2, 0x07E4, 2, 0), + MX6_PAD_SD3_CLK__USBOH3_UH3_DFD_OUT_5 = IOMUX_PAD(0x06A4, 0x02BC, 3, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__USBOH3_UH2_DFD_OUT_5 = IOMUX_PAD(0x06A4, 0x02BC, 4, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__GPIO_7_3 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__MIPI_CORE_DPHY_IN_17 = IOMUX_PAD(0x06A4, 0x02BC, 6, 0x0000, 0, 0), + MX6_PAD_SD3_CLK__ANATOP_TESTO_14 = IOMUX_PAD(0x06A4, 0x02BC, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06A8, 0x02C0, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__UART1_CTS = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x091C, 2, 0), + MX6_PAD_SD3_DAT0__CAN2_TXCAN = IOMUX_PAD(0x06A8, 0x02C0, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__USBOH3_UH3_DFD_OUT_6 = IOMUX_PAD(0x06A8, 0x02C0, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__USBOH3_UH2_DFD_OUT_6 = IOMUX_PAD(0x06A8, 0x02C0, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__GPIO_7_4 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__MIPI_CORE_DPHY_IN_18 = IOMUX_PAD(0x06A8, 0x02C0, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT0__ANATOP_TESTO_15 = IOMUX_PAD(0x06A8, 0x02C0, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x06AC, 0x02C4, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__UART1_CTS = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__UART1_RTS = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x091C, 3, 0), + MX6_PAD_SD3_DAT1__CAN2_RXCAN = IOMUX_PAD(0x06AC, 0x02C4, 2, 0x07E8, 1, 0), + MX6_PAD_SD3_DAT1__USBOH3_UH3_DFD_OUT_7 = IOMUX_PAD(0x06AC, 0x02C4, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__USBOH3_UH2_DFD_OUT_7 = IOMUX_PAD(0x06AC, 0x02C4, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__GPIO_7_5 = IOMUX_PAD(0x06AC, 0x02C4, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__MIPI_CORE_DPHY_IN_19 = IOMUX_PAD(0x06AC, 0x02C4, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT1__ANATOP_TESTI_0 = IOMUX_PAD(0x06AC, 0x02C4, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x06B0, 0x02C8, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__PCIE_CTRL_MUX_28 = IOMUX_PAD(0x06B0, 0x02C8, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__USBOH3_UH3_DFD_OUT_8 = IOMUX_PAD(0x06B0, 0x02C8, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__USBOH3_UH2_DFD_OUT_8 = IOMUX_PAD(0x06B0, 0x02C8, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__GPIO_7_6 = IOMUX_PAD(0x06B0, 0x02C8, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__MIPI_CORE_DPHY_IN_20 = IOMUX_PAD(0x06B0, 0x02C8, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT2__ANATOP_TESTI_1 = IOMUX_PAD(0x06B0, 0x02C8, 7, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x06B4, 0x02CC, 0, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__UART3_CTS = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x092C, 4, 0), + MX6_PAD_SD3_DAT3__PCIE_CTRL_MUX_29 = IOMUX_PAD(0x06B4, 0x02CC, 2, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__USBOH3_UH3_DFD_OUT_9 = IOMUX_PAD(0x06B4, 0x02CC, 3, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__USBOH3_UH2_DFD_OUT_9 = IOMUX_PAD(0x06B4, 0x02CC, 4, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__GPIO_7_7 = IOMUX_PAD(0x06B4, 0x02CC, 5, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__MIPI_CORE_DPHY_IN_21 = IOMUX_PAD(0x06B4, 0x02CC, 6, 0x0000, 0, 0), + MX6_PAD_SD3_DAT3__ANATOP_TESTI_2 = IOMUX_PAD(0x06B4, 0x02CC, 7, 0x0000, 0, 0), + MX6_PAD_SD3_RST__USDHC3_RST = IOMUX_PAD(0x06B8, 0x02D0, 0, 0x0000, 0, 0), + MX6_PAD_SD3_RST__UART3_CTS = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0), + MX6_PAD_SD3_RST__UART3_RTS = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x092C, 5, 0), + MX6_PAD_SD3_RST__PCIE_CTRL_MUX_30 = IOMUX_PAD(0x06B8, 0x02D0, 2, 0x0000, 0, 0), + MX6_PAD_SD3_RST__USBOH3_UH3_DFD_OUT_10 = IOMUX_PAD(0x06B8, 0x02D0, 3, 0x0000, 0, 0), + MX6_PAD_SD3_RST__USBOH3_UH2_DFD_OUT_10 = IOMUX_PAD(0x06B8, 0x02D0, 4, 0x0000, 0, 0), + MX6_PAD_SD3_RST__GPIO_7_8 = IOMUX_PAD(0x06B8, 0x02D0, 5, 0x0000, 0, 0), + MX6_PAD_SD3_RST__MIPI_CORE_DPHY_IN_22 = IOMUX_PAD(0x06B8, 0x02D0, 6, 0x0000, 0, 0), + MX6_PAD_SD3_RST__ANATOP_ANATOP_TESTI_3 = IOMUX_PAD(0x06B8, 0x02D0, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__RAWNAND_CLE = IOMUX_PAD(0x06BC, 0x02D4, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__IPU2_SISG_4 = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__PCIE_CTRL_MUX_31 = IOMUX_PAD(0x06BC, 0x02D4, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__USBOH3_UH3_DFD_OT11 = IOMUX_PAD(0x06BC, 0x02D4, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__USBOH3_UH2_DFD_OT11 = IOMUX_PAD(0x06BC, 0x02D4, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__GPIO_6_7 = IOMUX_PAD(0x06BC, 0x02D4, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__MIPI_CORE_DPHY_IN23 = IOMUX_PAD(0x06BC, 0x02D4, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_CLE__TPSMP_HTRANS_0 = IOMUX_PAD(0x06BC, 0x02D4, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__RAWNAND_ALE = IOMUX_PAD(0x06C0, 0x02D8, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__USDHC4_RST = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__PCIE_CTRL_MUX_0 = IOMUX_PAD(0x06C0, 0x02D8, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__USBOH3_UH3_DFD_OT12 = IOMUX_PAD(0x06C0, 0x02D8, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__USBOH3_UH2_DFD_OT12 = IOMUX_PAD(0x06C0, 0x02D8, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__GPIO_6_8 = IOMUX_PAD(0x06C0, 0x02D8, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__MIPI_CR_DPHY_IN_24 = IOMUX_PAD(0x06C0, 0x02D8, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_ALE__TPSMP_HTRANS_1 = IOMUX_PAD(0x06C0, 0x02D8, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__RAWNAND_RESETN = IOMUX_PAD(0x06C4, 0x02DC, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__IPU2_SISG_5 = IOMUX_PAD(0x06C4, 0x02DC, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__PCIE_CTRL__MUX_1 = IOMUX_PAD(0x06C4, 0x02DC, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__USBOH3_UH3_DFDOT13 = IOMUX_PAD(0x06C4, 0x02DC, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__USBOH3_UH2_DFDOT13 = IOMUX_PAD(0x06C4, 0x02DC, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__GPIO_6_9 = IOMUX_PAD(0x06C4, 0x02DC, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__MIPI_CR_DPHY_OUT32 = IOMUX_PAD(0x06C4, 0x02DC, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_WP_B__PL301_PER1_HSIZE_0 = IOMUX_PAD(0x06C4, 0x02DC, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__RAWNAND_READY0 = IOMUX_PAD(0x06C8, 0x02E0, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__IPU2_DI0_PIN1 = IOMUX_PAD(0x06C8, 0x02E0, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__PCIE_CTRL_MUX_2 = IOMUX_PAD(0x06C8, 0x02E0, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__USBOH3_UH3_DFD_OT14 = IOMUX_PAD(0x06C8, 0x02E0, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__USBOH3_UH2_DFD_OT14 = IOMUX_PAD(0x06C8, 0x02E0, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__GPIO_6_10 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__MIPI_CR_DPHY_OUT_33 = IOMUX_PAD(0x06C8, 0x02E0, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_RB0__PL301_PER1_HSIZE_1 = IOMUX_PAD(0x06C8, 0x02E0, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_CS0__RAWNAND_CE0N = IOMUX_PAD(0x06CC, 0x02E4, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_CS0__USBOH3_UH3_DFD_OT15 = IOMUX_PAD(0x06CC, 0x02E4, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_CS0__USBOH3_UH2_DFD_OT15 = IOMUX_PAD(0x06CC, 0x02E4, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_CS0__GPIO_6_11 = IOMUX_PAD(0x06CC, 0x02E4, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CS0__PL301_PER1_HSIZE_2 = IOMUX_PAD(0x06CC, 0x02E4, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_CS1__RAWNAND_CE1N = IOMUX_PAD(0x06D0, 0x02E8, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_CS1__USDHC4_VSELECT = IOMUX_PAD(0x06D0, 0x02E8, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_CS1__USDHC3_VSELECT = IOMUX_PAD(0x06D0, 0x02E8, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_CS1__PCIE_CTRL_MUX_3 = IOMUX_PAD(0x06D0, 0x02E8, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_CS1__GPIO_6_14 = IOMUX_PAD(0x06D0, 0x02E8, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CS1__PL301_PER1_HRDYOUT = IOMUX_PAD(0x06D0, 0x02E8, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_CS2__RAWNAND_CE2N = IOMUX_PAD(0x06D4, 0x02EC, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_CS2__IPU1_SISG_0 = IOMUX_PAD(0x06D4, 0x02EC, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_CS2__ESAI1_TX0 = IOMUX_PAD(0x06D4, 0x02EC, 2, 0x0874, 1, 0), + MX6_PAD_NANDF_CS2__WEIM_WEIM_CRE = IOMUX_PAD(0x06D4, 0x02EC, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_CS2__CCM_CLKO2 = IOMUX_PAD(0x06D4, 0x02EC, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_CS2__GPIO_6_15 = IOMUX_PAD(0x06D4, 0x02EC, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CS2__IPU2_SISG_0 = IOMUX_PAD(0x06D4, 0x02EC, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__RAWNAND_CE3N = IOMUX_PAD(0x06D8, 0x02F0, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__IPU1_SISG_1 = IOMUX_PAD(0x06D8, 0x02F0, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__ESAI1_TX1 = IOMUX_PAD(0x06D8, 0x02F0, 2, 0x0878, 1, 0), + MX6_PAD_NANDF_CS3__WEIM_WEIM_A_26 = IOMUX_PAD(0x06D8, 0x02F0, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__PCIE_CTRL_MUX_4 = IOMUX_PAD(0x06D8, 0x02F0, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__GPIO_6_16 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__IPU2_SISG_1 = IOMUX_PAD(0x06D8, 0x02F0, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_CS3__TPSMP_CLK = IOMUX_PAD(0x06D8, 0x02F0, 7, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x06DC, 0x02F4, 16, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__RAWNAND_RDN = IOMUX_PAD(0x06DC, 0x02F4, 1, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__UART3_TXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__UART3_TXD_RXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0930, 2, 0), + MX6_PAD_SD4_CMD__PCIE_CTRL_MUX_5 = IOMUX_PAD(0x06DC, 0x02F4, 4, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__GPIO_7_9 = IOMUX_PAD(0x06DC, 0x02F4, 5, 0x0000, 0, 0), + MX6_PAD_SD4_CMD__TPSMP_HDATA_DIR = IOMUX_PAD(0x06DC, 0x02F4, 7, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x06E0, 0x02F8, 0, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__RAWNAND_WRN = IOMUX_PAD(0x06E0, 0x02F8, 1, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__UART3_RXD = IOMUX_PAD(0x06E0, 0x02F8, 2, 0x0930, 3, 0), + MX6_PAD_SD4_CLK__PCIE_CTRL_MUX_6 = IOMUX_PAD(0x06E0, 0x02F8, 4, 0x0000, 0, 0), + MX6_PAD_SD4_CLK__GPIO_7_10 = IOMUX_PAD(0x06E0, 0x02F8, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__RAWNAND_D0 = IOMUX_PAD(0x06E4, 0x02FC, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__USDHC1_DAT4 = IOMUX_PAD(0x06E4, 0x02FC, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__GPU3D_GPU_DBG_OUT_0 = IOMUX_PAD(0x06E4, 0x02FC, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__USBOH3_UH2_DFD_OUT16 = IOMUX_PAD(0x06E4, 0x02FC, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__USBOH3_UH3_DFD_OUT16 = IOMUX_PAD(0x06E4, 0x02FC, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__GPIO_2_0 = IOMUX_PAD(0x06E4, 0x02FC, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__IPU1_IPU_DIAG_BUS_0 = IOMUX_PAD(0x06E4, 0x02FC, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D0__IPU2_IPU_DIAG_BUS_0 = IOMUX_PAD(0x06E4, 0x02FC, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__RAWNAND_D1 = IOMUX_PAD(0x06E8, 0x0300, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__USDHC1_DAT5 = IOMUX_PAD(0x06E8, 0x0300, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__GPU3D_GPU_DEBUG_OUT1 = IOMUX_PAD(0x06E8, 0x0300, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__USBOH3_UH2_DFD_OUT17 = IOMUX_PAD(0x06E8, 0x0300, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__USBOH3_UH3_DFD_OUT17 = IOMUX_PAD(0x06E8, 0x0300, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x06E8, 0x0300, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__IPU1_IPU_DIAG_BUS_1 = IOMUX_PAD(0x06E8, 0x0300, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D1__IPU2_IPU_DIAG_BUS_1 = IOMUX_PAD(0x06E8, 0x0300, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__RAWNAND_D2 = IOMUX_PAD(0x06EC, 0x0304, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__USDHC1_DAT6 = IOMUX_PAD(0x06EC, 0x0304, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__GPU3D_GPU_DBG_OUT_2 = IOMUX_PAD(0x06EC, 0x0304, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__USBOH3_UH2_DFD_OUT18 = IOMUX_PAD(0x06EC, 0x0304, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__USBOH3_UH3_DFD_OUT18 = IOMUX_PAD(0x06EC, 0x0304, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x06EC, 0x0304, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__IPU1_IPU_DIAG_BUS_2 = IOMUX_PAD(0x06EC, 0x0304, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D2__IPU2_IPU_DIAG_BUS_2 = IOMUX_PAD(0x06EC, 0x0304, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__RAWNAND_D3 = IOMUX_PAD(0x06F0, 0x0308, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__USDHC1_DAT7 = IOMUX_PAD(0x06F0, 0x0308, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__GPU3D_GPU_DBG_OUT_3 = IOMUX_PAD(0x06F0, 0x0308, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__USBOH3_UH2_DFD_OUT19 = IOMUX_PAD(0x06F0, 0x0308, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__USBOH3_UH3_DFD_OUT19 = IOMUX_PAD(0x06F0, 0x0308, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x06F0, 0x0308, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__IPU1_IPU_DIAG_BUS_3 = IOMUX_PAD(0x06F0, 0x0308, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D3__IPU2_IPU_DIAG_BUS_3 = IOMUX_PAD(0x06F0, 0x0308, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__RAWNAND_D4 = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__USDHC2_DAT4 = IOMUX_PAD(0x06F4, 0x030C, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__GPU3D_GPU_DBG_OUT_4 = IOMUX_PAD(0x06F4, 0x030C, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__USBOH3_UH2_DFD_OUT20 = IOMUX_PAD(0x06F4, 0x030C, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__USBOH3_UH3_DFD_OUT20 = IOMUX_PAD(0x06F4, 0x030C, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x06F4, 0x030C, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__IPU1_IPU_DIAG_BUS_4 = IOMUX_PAD(0x06F4, 0x030C, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D4__IPU2_IPU_DIAG_BUS_4 = IOMUX_PAD(0x06F4, 0x030C, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__RAWNAND_D5 = IOMUX_PAD(0x06F8, 0x0310, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__USDHC2_DAT5 = IOMUX_PAD(0x06F8, 0x0310, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__GPU3D_GPU_DBG_OUT_5 = IOMUX_PAD(0x06F8, 0x0310, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__USBOH3_UH2_DFD_OUT21 = IOMUX_PAD(0x06F8, 0x0310, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__USBOH3_UH3_DFD_OUT21 = IOMUX_PAD(0x06F8, 0x0310, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__GPIO_2_5 = IOMUX_PAD(0x06F8, 0x0310, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__IPU1_IPU_DIAG_BUS_5 = IOMUX_PAD(0x06F8, 0x0310, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D5__IPU2_IPU_DIAG_BUS_5 = IOMUX_PAD(0x06F8, 0x0310, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__RAWNAND_D6 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__USDHC2_DAT6 = IOMUX_PAD(0x06FC, 0x0314, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__GPU3D_GPU_DBG_OUT_6 = IOMUX_PAD(0x06FC, 0x0314, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__USBOH3_UH2_DFD_OUT22 = IOMUX_PAD(0x06FC, 0x0314, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__USBOH3_UH3_DFD_OUT22 = IOMUX_PAD(0x06FC, 0x0314, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x06FC, 0x0314, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__IPU1_IPU_DIAG_BUS_6 = IOMUX_PAD(0x06FC, 0x0314, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D6__IPU2_IPU_DIAG_BUS_6 = IOMUX_PAD(0x06FC, 0x0314, 7, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__RAWNAND_D7 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__USDHC2_DAT7 = IOMUX_PAD(0x0700, 0x0318, 1, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__GPU3D_GPU_DBG_OUT_7 = IOMUX_PAD(0x0700, 0x0318, 2, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__USBOH3_UH2_DFD_OUT23 = IOMUX_PAD(0x0700, 0x0318, 3, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__USBOH3_UH3_DFD_OUT23 = IOMUX_PAD(0x0700, 0x0318, 4, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__GPIO_2_7 = IOMUX_PAD(0x0700, 0x0318, 5, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__IPU1_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0700, 0x0318, 6, 0x0000, 0, 0), + MX6_PAD_NANDF_D7__IPU2_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0700, 0x0318, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__RAWNAND_D8 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0704, 0x031C, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__RAWNAND_DQS = IOMUX_PAD(0x0704, 0x031C, 2, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__USBOH3_UH2_DFD_OUT24 = IOMUX_PAD(0x0704, 0x031C, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__USBOH3_UH3_DFD_OUT24 = IOMUX_PAD(0x0704, 0x031C, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__GPIO_2_8 = IOMUX_PAD(0x0704, 0x031C, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__IPU1_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0704, 0x031C, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT0__IPU2_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0704, 0x031C, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__RAWNAND_D9 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x0708, 0x0320, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__PWM3_PWMO = IOMUX_PAD(0x0708, 0x0320, 2, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__USBOH3_UH2_DFD_OUT25 = IOMUX_PAD(0x0708, 0x0320, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__USBOH3_UH3_DFD_OUT25 = IOMUX_PAD(0x0708, 0x0320, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__GPIO_2_9 = IOMUX_PAD(0x0708, 0x0320, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__IPU1_IPU_DIAG_BUS_9 = IOMUX_PAD(0x0708, 0x0320, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT1__IPU2_IPU_DIAG_BUS_9 = IOMUX_PAD(0x0708, 0x0320, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__RAWNAND_D10 = IOMUX_PAD(0x070C, 0x0324, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x070C, 0x0324, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__PWM4_PWMO = IOMUX_PAD(0x070C, 0x0324, 2, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__USBOH3_UH2_DFD_OUT26 = IOMUX_PAD(0x070C, 0x0324, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__USBOH3_UH3_DFD_OUT26 = IOMUX_PAD(0x070C, 0x0324, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__GPIO_2_10 = IOMUX_PAD(0x070C, 0x0324, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__IPU1_IPU_DIAG_BUS_10 = IOMUX_PAD(0x070C, 0x0324, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT2__IPU2_IPU_DIAG_BUS_10 = IOMUX_PAD(0x070C, 0x0324, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__RAWNAND_D11 = IOMUX_PAD(0x0710, 0x0328, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0710, 0x0328, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__USBOH3_UH2_DFD_OUT27 = IOMUX_PAD(0x0710, 0x0328, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__USBOH3_UH3_DFD_OUT27 = IOMUX_PAD(0x0710, 0x0328, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__GPIO_2_11 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__IPU1_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT3__IPU2_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT4__RAWNAND_D12 = IOMUX_PAD(0x0714, 0x032C, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT4__USDHC4_DAT4 = IOMUX_PAD(0x0714, 0x032C, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT4__UART2_RXD = IOMUX_PAD(0x0714, 0x032C, 2, 0x0928, 6, 0), + MX6_PAD_SD4_DAT4__USBOH3_UH2_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT4__USBOH3_UH3_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT4__GPIO_2_12 = IOMUX_PAD(0x0714, 0x032C, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT4__IPU1_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0714, 0x032C, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT4__IPU2_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0714, 0x032C, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__RAWNAND_D13 = IOMUX_PAD(0x0718, 0x0330, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__USDHC4_DAT5 = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__UART2_CTS = IOMUX_PAD(0x0718, 0x0330, 2, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__UART2_RTS = IOMUX_PAD(0x0718, 0x0330, 2, 0x0924, 4, 0), + MX6_PAD_SD4_DAT5__USBOH3_UH2_DFD_OUT29 = IOMUX_PAD(0x0718, 0x0330, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__USBOH3_UH3_DFD_OUT29 = IOMUX_PAD(0x0718, 0x0330, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__GPIO_2_13 = IOMUX_PAD(0x0718, 0x0330, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__IPU1_IPU_DIAG_BUS_13 = IOMUX_PAD(0x0718, 0x0330, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT5__IPU2_IPU_DIAG_BUS_13 = IOMUX_PAD(0x0718, 0x0330, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT6__RAWNAND_D14 = IOMUX_PAD(0x071C, 0x0334, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT6__USDHC4_DAT6 = IOMUX_PAD(0x071C, 0x0334, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT6__UART2_CTS = IOMUX_PAD(0x071C, 0x0334, 2, 0x0924, 5, 0), + MX6_PAD_SD4_DAT6__USBOH3_UH2_DFD_OUT30 = IOMUX_PAD(0x071C, 0x0334, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT6__USBOH3_UH3_DFD_OUT30 = IOMUX_PAD(0x071C, 0x0334, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT6__GPIO_2_14 = IOMUX_PAD(0x071C, 0x0334, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT6__IPU1_IPU_DIAG_BUS_14 = IOMUX_PAD(0x071C, 0x0334, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT6__IPU2_IPU_DIAG_BUS_14 = IOMUX_PAD(0x071C, 0x0334, 7, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__RAWNAND_D15 = IOMUX_PAD(0x0720, 0x0338, 0, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__USDHC4_DAT7 = IOMUX_PAD(0x0720, 0x0338, 1, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__UART2_TXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__UART2_TXD_RXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0928, 7, 0), + MX6_PAD_SD4_DAT7__USBOH3_UH2_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 3, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__USBOH3_UH3_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 4, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__GPIO_2_15 = IOMUX_PAD(0x0720, 0x0338, 5, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__IPU1_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0720, 0x0338, 6, 0x0000, 0, 0), + MX6_PAD_SD4_DAT7__IPU2_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0720, 0x0338, 7, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__USDHC1_DAT1 = IOMUX_PAD(0x0724, 0x033C, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0724, 0x033C, 1, 0x0834, 1, 0), + MX6_PAD_SD1_DAT1__PWM3_PWMO = IOMUX_PAD(0x0724, 0x033C, 2, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__GPT_CAPIN2 = IOMUX_PAD(0x0724, 0x033C, 3, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__PCIE_CTRL_MUX_7 = IOMUX_PAD(0x0724, 0x033C, 4, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__GPIO_1_17 = IOMUX_PAD(0x0724, 0x033C, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__HDMI_TX_OPHYDTB_0 = IOMUX_PAD(0x0724, 0x033C, 6, 0x0000, 0, 0), + MX6_PAD_SD1_DAT1__ANATOP_TESTO_8 = IOMUX_PAD(0x0724, 0x033C, 7, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__USDHC1_DAT0 = IOMUX_PAD(0x0728, 0x0340, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__ECSPI5_MISO = IOMUX_PAD(0x0728, 0x0340, 1, 0x082C, 1, 0), + MX6_PAD_SD1_DAT0__CAAM_WRAP_RNG_OSCOBS = IOMUX_PAD(0x0728, 0x0340, 2, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__GPT_CAPIN1 = IOMUX_PAD(0x0728, 0x0340, 3, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__PCIE_CTRL_MUX_8 = IOMUX_PAD(0x0728, 0x0340, 4, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__GPIO_1_16 = IOMUX_PAD(0x0728, 0x0340, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__HDMI_TX_OPHYDTB_1 = IOMUX_PAD(0x0728, 0x0340, 6, 0x0000, 0, 0), + MX6_PAD_SD1_DAT0__ANATOP_TESTO_7 = IOMUX_PAD(0x0728, 0x0340, 7, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__USDHC1_DAT3 = IOMUX_PAD(0x072C, 0x0344, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__ECSPI5_SS2 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__GPT_CMPOUT3 = IOMUX_PAD(0x072C, 0x0344, 2, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__PWM1_PWMO = IOMUX_PAD(0x072C, 0x0344, 3, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__WDOG2_WDOG_B = IOMUX_PAD(0x072C, 0x0344, 4, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x072C, 0x0344, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__WDOG2_WDOG_RST_B_DEB = IOMUX_PAD(0x072C, 0x0344, 6, 0x0000, 0, 0), + MX6_PAD_SD1_DAT3__ANATOP_TESTO_6 = IOMUX_PAD(0x072C, 0x0344, 7, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x0730, 0x0348, 16, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__ECSPI5_MOSI = IOMUX_PAD(0x0730, 0x0348, 1, 0x0830, 0, 0), + MX6_PAD_SD1_CMD__PWM4_PWMO = IOMUX_PAD(0x0730, 0x0348, 2, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__GPT_CMPOUT1 = IOMUX_PAD(0x0730, 0x0348, 3, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x0730, 0x0348, 5, 0x0000, 0, 0), + MX6_PAD_SD1_CMD__ANATOP_TESTO_5 = IOMUX_PAD(0x0730, 0x0348, 7, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__USDHC1_DAT2 = IOMUX_PAD(0x0734, 0x034C, 0, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__ECSPI5_SS1 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0838, 1, 0), + MX6_PAD_SD1_DAT2__GPT_CMPOUT2 = IOMUX_PAD(0x0734, 0x034C, 2, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__PWM2_PWMO = IOMUX_PAD(0x0734, 0x034C, 3, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__WDOG1_WDOG_B = IOMUX_PAD(0x0734, 0x034C, 4, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__GPIO_1_19 = IOMUX_PAD(0x0734, 0x034C, 5, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x0734, 0x034C, 6, 0x0000, 0, 0), + MX6_PAD_SD1_DAT2__ANATOP_TESTO_4 = IOMUX_PAD(0x0734, 0x034C, 7, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x0738, 0x0350, 0, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__ECSPI5_SCLK = IOMUX_PAD(0x0738, 0x0350, 1, 0x0828, 0, 0), + MX6_PAD_SD1_CLK__OSC32K_32K_OUT = IOMUX_PAD(0x0738, 0x0350, 2, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__GPT_CLKIN = IOMUX_PAD(0x0738, 0x0350, 3, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__GPIO_1_20 = IOMUX_PAD(0x0738, 0x0350, 5, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__PHY_DTB_0 = IOMUX_PAD(0x0738, 0x0350, 6, 0x0000, 0, 0), + MX6_PAD_SD1_CLK__SATA_PHY_DTB_0 = IOMUX_PAD(0x0738, 0x0350, 7, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x073C, 0x0354, 0, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__ECSPI5_SCLK = IOMUX_PAD(0x073C, 0x0354, 1, 0x0828, 1, 0), + MX6_PAD_SD2_CLK__KPP_COL_5 = IOMUX_PAD(0x073C, 0x0354, 2, 0x08E8, 3, 0), + MX6_PAD_SD2_CLK__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x073C, 0x0354, 3, 0x07C0, 1, 0), + MX6_PAD_SD2_CLK__PCIE_CTRL_MUX_9 = IOMUX_PAD(0x073C, 0x0354, 4, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__GPIO_1_10 = IOMUX_PAD(0x073C, 0x0354, 5, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__PHY_DTB_1 = IOMUX_PAD(0x073C, 0x0354, 6, 0x0000, 0, 0), + MX6_PAD_SD2_CLK__SATA_PHY_DTB_1 = IOMUX_PAD(0x073C, 0x0354, 7, 0x0000, 0, 0), + MX6_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0740, 0x0358, 16, 0x0000, 0, 0), + MX6_PAD_SD2_CMD__ECSPI5_MOSI = IOMUX_PAD(0x0740, 0x0358, 1, 0x0830, 1, 0), + MX6_PAD_SD2_CMD__KPP_ROW_5 = IOMUX_PAD(0x0740, 0x0358, 2, 0x08F4, 2, 0), + MX6_PAD_SD2_CMD__AUDMUX_AUD4_RXC = IOMUX_PAD(0x0740, 0x0358, 3, 0x07BC, 1, 0), + MX6_PAD_SD2_CMD__PCIE_CTRL_MUX_10 = IOMUX_PAD(0x0740, 0x0358, 4, 0x0000, 0, 0), + MX6_PAD_SD2_CMD__GPIO_1_11 = IOMUX_PAD(0x0740, 0x0358, 5, 0x0000, 0, 0), + MX6_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x0744, 0x035C, 0, 0x0000, 0, 0), + MX6_PAD_SD2_DAT3__ECSPI5_SS3 = IOMUX_PAD(0x0744, 0x035C, 1, 0x0000, 0, 0), + MX6_PAD_SD2_DAT3__KPP_COL_6 = IOMUX_PAD(0x0744, 0x035C, 2, 0x08EC, 2, 0), + MX6_PAD_SD2_DAT3__AUDMUX_AUD4_TXC = IOMUX_PAD(0x0744, 0x035C, 3, 0x07C4, 1, 0), + MX6_PAD_SD2_DAT3__PCIE_CTRL_MUX_11 = IOMUX_PAD(0x0744, 0x035C, 4, 0x0000, 0, 0), + MX6_PAD_SD2_DAT3__GPIO_1_12 = IOMUX_PAD(0x0744, 0x035C, 5, 0x0000, 0, 0), + MX6_PAD_SD2_DAT3__SJC_DONE = IOMUX_PAD(0x0744, 0x035C, 6, 0x0000, 0, 0), + MX6_PAD_SD2_DAT3__ANATOP_TESTO_3 = IOMUX_PAD(0x0744, 0x035C, 7, 0x0000, 0, 0), +}; + +#endif /* __ASM_ARCH_MX6_MX6Q_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mx6x_pins.h b/arch/arm/include/asm/arch-mx6/mx6x_pins.h deleted file mode 100644 index 3ade8dc433..0000000000 --- a/arch/arm/include/asm/arch-mx6/mx6x_pins.h +++ /dev/null @@ -1,1671 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - * - * Auto Generate file, please don't edit it - * - */ - -#ifndef __ASM_ARCH_MX6_MX6X_PINS_H__ -#define __ASM_ARCH_MX6_MX6X_PINS_H__ - -#include <asm/imx-common/iomux-v3.h> - -/* Use to set PAD control */ -#define PAD_CTL_HYS (1 << 16) -#define PAD_CTL_PUS_100K_DOWN (0 << 14) -#define PAD_CTL_PUS_47K_UP (1 << 14) -#define PAD_CTL_PUS_100K_UP (2 << 14) -#define PAD_CTL_PUS_22K_UP (3 << 14) - -#define PAD_CTL_PUE (1 << 13) -#define PAD_CTL_PKE (1 << 12) -#define PAD_CTL_ODE (1 << 11) -#define PAD_CTL_SPEED_LOW (1 << 6) -#define PAD_CTL_SPEED_MED (2 << 6) -#define PAD_CTL_SPEED_HIGH (3 << 6) -#define PAD_CTL_DSE_DISABLE (0 << 3) -#define PAD_CTL_DSE_240ohm (1 << 3) -#define PAD_CTL_DSE_120ohm (2 << 3) -#define PAD_CTL_DSE_80ohm (3 << 3) -#define PAD_CTL_DSE_60ohm (4 << 3) -#define PAD_CTL_DSE_48ohm (5 << 3) -#define PAD_CTL_DSE_40ohm (6 << 3) -#define PAD_CTL_DSE_34ohm (7 << 3) -#define PAD_CTL_SRE_FAST (1 << 0) -#define PAD_CTL_SRE_SLOW (0 << 0) - -#define NO_MUX_I 0 -#define NO_PAD_I 0 - -enum { - MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 = IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0), - MX6Q_PAD_SD2_DAT1__WEIM_WEIM_CS_2 = IOMUX_PAD(0x0360, 0x004C, 2, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x0360, 0x004C, 3, 0x07C8, 0, 0), - MX6Q_PAD_SD2_DAT1__KPP_COL_7 = IOMUX_PAD(0x0360, 0x004C, 4, 0x08F0, 0, 0), - MX6Q_PAD_SD2_DAT1__GPIO_1_14 = IOMUX_PAD(0x0360, 0x004C, 5, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT1__CCM_WAIT = IOMUX_PAD(0x0360, 0x004C, 6, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT1__ANATOP_TESTO_0 = IOMUX_PAD(0x0360, 0x004C, 7, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 = IOMUX_PAD(0x0364, 0x0050, 0, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT2__ECSPI5_SS1 = IOMUX_PAD(0x0364, 0x0050, 1, 0x0838, 0, 0), - MX6Q_PAD_SD2_DAT2__WEIM_WEIM_CS_3 = IOMUX_PAD(0x0364, 0x0050, 2, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD = IOMUX_PAD(0x0364, 0x0050, 3, 0x07B8, 0, 0), - MX6Q_PAD_SD2_DAT2__KPP_ROW_6 = IOMUX_PAD(0x0364, 0x0050, 4, 0x08F8, 0, 0), - MX6Q_PAD_SD2_DAT2__GPIO_1_13 = IOMUX_PAD(0x0364, 0x0050, 5, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT2__CCM_STOP = IOMUX_PAD(0x0364, 0x0050, 6, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT2__ANATOP_TESTO_1 = IOMUX_PAD(0x0364, 0x0050, 7, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 = IOMUX_PAD(0x0368, 0x0054, 0, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT0__ECSPI5_MISO = IOMUX_PAD(0x0368, 0x0054, 1, 0x082C, 0, 0), - MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD = IOMUX_PAD(0x0368, 0x0054, 3, 0x07B4, 0, 0), - MX6Q_PAD_SD2_DAT0__KPP_ROW_7 = IOMUX_PAD(0x0368, 0x0054, 4, 0x08FC, 0, 0), - MX6Q_PAD_SD2_DAT0__GPIO_1_15 = IOMUX_PAD(0x0368, 0x0054, 5, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT0__DCIC2_DCIC_OUT = IOMUX_PAD(0x0368, 0x0054, 6, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT0__TESTO_2 = IOMUX_PAD(0x0368, 0x0054, 7, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TXC__USBOH3_H2_DATA = IOMUX_PAD(0x036C, 0x0058, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x036C, 0x0058, 1, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TXC__SPDIF_SPDIF_EXTCLK = IOMUX_PAD(0x036C, 0x0058, 2, 0x0918, 0, 0), - MX6Q_PAD_RGMII_TXC__GPIO_6_19 = IOMUX_PAD(0x036C, 0x0058, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TXC__MIPI_CORE_DPHY_IN_0 = IOMUX_PAD(0x036C, 0x0058, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TXC__ANATOP_24M_OUT = IOMUX_PAD(0x036C, 0x0058, 7, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD0__MIPI_HSI_CRL_TX_RDY = IOMUX_PAD(0x0370, 0x005C, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x0370, 0x005C, 1, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD0__GPIO_6_20 = IOMUX_PAD(0x0370, 0x005C, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD0__MIPI_CORE_DPHY_IN_1 = IOMUX_PAD(0x0370, 0x005C, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD1__MIPI_HSI_CRL_RX_FLG = IOMUX_PAD(0x0374, 0x0060, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x0374, 0x0060, 1, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD1__GPIO_6_21 = IOMUX_PAD(0x0374, 0x0060, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD1__MIPI_CORE_DPHY_IN_2 = IOMUX_PAD(0x0374, 0x0060, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD1__CCM_PLL3_BYP = IOMUX_PAD(0x0374, 0x0060, 7, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD2__MIPI_HSI_CRL_RX_DTA = IOMUX_PAD(0x0378, 0x0064, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x0378, 0x0064, 1, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD2__GPIO_6_22 = IOMUX_PAD(0x0378, 0x0064, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD2__MIPI_CORE_DPHY_IN_3 = IOMUX_PAD(0x0378, 0x0064, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD2__CCM_PLL2_BYP = IOMUX_PAD(0x0378, 0x0064, 7, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD3__MIPI_HSI_CRL_RX_WAK = IOMUX_PAD(0x037C, 0x0068, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x037C, 0x0068, 1, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD3__GPIO_6_23 = IOMUX_PAD(0x037C, 0x0068, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TD3__MIPI_CORE_DPHY_IN_4 = IOMUX_PAD(0x037C, 0x0068, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RX_CTL__USBOH3_H3_DATA = IOMUX_PAD(0x0380, 0x006C, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x0380, 0x006C, 1, 0x0858, 0, 0), - MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x0380, 0x006C, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RX_CTL__MIPI_DPHY_IN_5 = IOMUX_PAD(0x0380, 0x006C, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD0__MIPI_HSI_CRL_RX_RDY = IOMUX_PAD(0x0384, 0x0070, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0384, 0x0070, 1, 0x0848, 0, 0), - MX6Q_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0384, 0x0070, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD0__MIPI_CORE_DPHY_IN_6 = IOMUX_PAD(0x0384, 0x0070, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TX_CTL__USBOH3_H2_STROBE = IOMUX_PAD(0x0388, 0x0074, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x0388, 0x0074, 1, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TX_CTL__GPIO_6_26 = IOMUX_PAD(0x0388, 0x0074, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TX_CTL__CORE_DPHY_IN_7 = IOMUX_PAD(0x0388, 0x0074, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_TX_CTL__ANATOP_REF_OUT = IOMUX_PAD(0x0388, 0x0074, 7, 0x083C, 0, 0), - MX6Q_PAD_RGMII_RD1__MIPI_HSI_CTRL_TX_FL = IOMUX_PAD(0x038C, 0x0078, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x038C, 0x0078, 1, 0x084C, 0, 0), - MX6Q_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x038C, 0x0078, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD1__CORE_DPHY_TEST_IN_8 = IOMUX_PAD(0x038C, 0x0078, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD1__SJC_FAIL = IOMUX_PAD(0x038C, 0x0078, 7, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD2__MIPI_HSI_CRL_TX_DTA = IOMUX_PAD(0x0390, 0x007C, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x0390, 0x007C, 1, 0x0850, 0, 0), - MX6Q_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x0390, 0x007C, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD2__MIPI_CORE_DPHY_IN_9 = IOMUX_PAD(0x0390, 0x007C, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD3__MIPI_HSI_CRL_TX_WAK = IOMUX_PAD(0x0394, 0x0080, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x0394, 0x0080, 1, 0x0854, 0, 0), - MX6Q_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x0394, 0x0080, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RD3__MIPI_CORE_DPHY_IN10 = IOMUX_PAD(0x0394, 0x0080, 6, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RXC__USBOH3_H3_STROBE = IOMUX_PAD(0x0398, 0x0084, 0, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x0398, 0x0084, 1, 0x0844, 0, 0), - MX6Q_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x0398, 0x0084, 5, 0x0000, 0, 0), - MX6Q_PAD_RGMII_RXC__MIPI_CORE_DPHY_IN11 = IOMUX_PAD(0x0398, 0x0084, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A25__WEIM_WEIM_A_25 = IOMUX_PAD(0x039C, 0x0088, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A25__ECSPI4_SS1 = IOMUX_PAD(0x039C, 0x0088, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A25__ECSPI2_RDY = IOMUX_PAD(0x039C, 0x0088, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_A25__IPU1_DI1_PIN12 = IOMUX_PAD(0x039C, 0x0088, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A25__IPU1_DI0_D1_CS = IOMUX_PAD(0x039C, 0x0088, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A25__GPIO_5_2 = IOMUX_PAD(0x039C, 0x0088, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A25__HDMI_TX_CEC_LINE = IOMUX_PAD(0x039C, 0x0088, 6, 0x088C, 0, 0), - MX6Q_PAD_EIM_A25__PL301_PER1_HBURST_0 = IOMUX_PAD(0x039C, 0x0088, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB2__WEIM_WEIM_EB_2 = IOMUX_PAD(0x03A0, 0x008C, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB2__ECSPI1_SS0 = IOMUX_PAD(0x03A0, 0x008C, 1, 0x0800, 0, 0), - MX6Q_PAD_EIM_EB2__CCM_DI1_EXT_CLK = IOMUX_PAD(0x03A0, 0x008C, 2, 0x07EC, 0, 0), - MX6Q_PAD_EIM_EB2__IPU2_CSI1_D_19 = IOMUX_PAD(0x03A0, 0x008C, 3, 0x08D4, 0, 0), - MX6Q_PAD_EIM_EB2__HDMI_TX_DDC_SCL = IOMUX_PAD(0x03A0, 0x008C, 4, 0x0890, 0, 0), - MX6Q_PAD_EIM_EB2__GPIO_2_30 = IOMUX_PAD(0x03A0, 0x008C, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB2__I2C2_SCL = IOMUX_PAD(0x03A0, 0x008C, 22, 0x08A0, 0, 0), - MX6Q_PAD_EIM_EB2__SRC_BT_CFG_30 = IOMUX_PAD(0x03A0, 0x008C, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D16__WEIM_WEIM_D_16 = IOMUX_PAD(0x03A4, 0x0090, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x03A4, 0x0090, 1, 0x07F4, 0, 0), - MX6Q_PAD_EIM_D16__IPU1_DI0_PIN5 = IOMUX_PAD(0x03A4, 0x0090, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D16__IPU2_CSI1_D_18 = IOMUX_PAD(0x03A4, 0x0090, 3, 0x08D0, 0, 0), - MX6Q_PAD_EIM_D16__HDMI_TX_DDC_SDA = IOMUX_PAD(0x03A4, 0x0090, 4, 0x0894, 0, 0), - MX6Q_PAD_EIM_D16__GPIO_3_16 = IOMUX_PAD(0x03A4, 0x0090, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D16__I2C2_SDA = IOMUX_PAD(0x03A4, 0x0090, 22, 0x08A4, 0, 0), - MX6Q_PAD_EIM_D17__WEIM_WEIM_D_17 = IOMUX_PAD(0x03A8, 0x0094, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x03A8, 0x0094, 1, 0x07F8, 0, 0), - MX6Q_PAD_EIM_D17__IPU1_DI0_PIN6 = IOMUX_PAD(0x03A8, 0x0094, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D17__IPU2_CSI1_PIXCLK = IOMUX_PAD(0x03A8, 0x0094, 3, 0x08E0, 0, 0), - MX6Q_PAD_EIM_D17__DCIC1_DCIC_OUT = IOMUX_PAD(0x03A8, 0x0094, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D17__GPIO_3_17 = IOMUX_PAD(0x03A8, 0x0094, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D17__I2C3_SCL = IOMUX_PAD(0x03A8, 0x0094, 22, 0x08A8, 0, 0), - MX6Q_PAD_EIM_D17__PL301_PER1_HBURST_1 = IOMUX_PAD(0x03A8, 0x0094, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D18__WEIM_WEIM_D_18 = IOMUX_PAD(0x03AC, 0x0098, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x03AC, 0x0098, 1, 0x07FC, 0, 0), - MX6Q_PAD_EIM_D18__IPU1_DI0_PIN7 = IOMUX_PAD(0x03AC, 0x0098, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D18__IPU2_CSI1_D_17 = IOMUX_PAD(0x03AC, 0x0098, 3, 0x08CC, 0, 0), - MX6Q_PAD_EIM_D18__IPU1_DI1_D0_CS = IOMUX_PAD(0x03AC, 0x0098, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D18__GPIO_3_18 = IOMUX_PAD(0x03AC, 0x0098, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D18__I2C3_SDA = IOMUX_PAD(0x03AC, 0x0098, 22, 0x08AC, 0, 0), - MX6Q_PAD_EIM_D18__PL301_PER1_HBURST_2 = IOMUX_PAD(0x03AC, 0x0098, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D19__WEIM_WEIM_D_19 = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D19__ECSPI1_SS1 = IOMUX_PAD(0x03B0, 0x009C, 1, 0x0804, 0, 0), - MX6Q_PAD_EIM_D19__IPU1_DI0_PIN8 = IOMUX_PAD(0x03B0, 0x009C, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D19__IPU2_CSI1_D_16 = IOMUX_PAD(0x03B0, 0x009C, 3, 0x08C8, 0, 0), - MX6Q_PAD_EIM_D19__UART1_CTS = IOMUX_PAD(0x03B0, 0x009C, 4, 0x091C, 0, 0), - MX6Q_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x03B0, 0x009C, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D19__EPIT1_EPITO = IOMUX_PAD(0x03B0, 0x009C, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D19__PL301MX6QPER1_HRESP = IOMUX_PAD(0x03B0, 0x009C, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D20__WEIM_WEIM_D_20 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D20__ECSPI4_SS0 = IOMUX_PAD(0x03B4, 0x00A0, 1, 0x0824, 0, 0), - MX6Q_PAD_EIM_D20__IPU1_DI0_PIN16 = IOMUX_PAD(0x03B4, 0x00A0, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D20__IPU2_CSI1_D_15 = IOMUX_PAD(0x03B4, 0x00A0, 3, 0x08C4, 0, 0), - MX6Q_PAD_EIM_D20__UART1_CTS = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D20__UART1_RTS = IOMUX_PAD(0x03B4, 0x00A0, 4, 0x091C, 1, 0), - MX6Q_PAD_EIM_D20__GPIO_3_20 = IOMUX_PAD(0x03B4, 0x00A0, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D20__EPIT2_EPITO = IOMUX_PAD(0x03B4, 0x00A0, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D21__WEIM_WEIM_D_21 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D21__ECSPI4_SCLK = IOMUX_PAD(0x03B8, 0x00A4, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D21__IPU1_DI0_PIN17 = IOMUX_PAD(0x03B8, 0x00A4, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D21__IPU2_CSI1_D_11 = IOMUX_PAD(0x03B8, 0x00A4, 3, 0x08B4, 0, 0), - MX6Q_PAD_EIM_D21__USBOH3_USBOTG_OC = IOMUX_PAD(0x03B8, 0x00A4, 4, 0x0944, 0, 0), - MX6Q_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x03B8, 0x00A4, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x03B8, 0x00A4, 22, 0x0898, 0, 0), - MX6Q_PAD_EIM_D21__SPDIF_IN1 = IOMUX_PAD(0x03B8, 0x00A4, 7, 0x0914, 0, 0), - MX6Q_PAD_EIM_D22__WEIM_WEIM_D_22 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D22__ECSPI4_MISO = IOMUX_PAD(0x03BC, 0x00A8, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D22__IPU1_DI0_PIN1 = IOMUX_PAD(0x03BC, 0x00A8, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D22__IPU2_CSI1_D_10 = IOMUX_PAD(0x03BC, 0x00A8, 3, 0x08B0, 0, 0), - MX6Q_PAD_EIM_D22__USBOH3_USBOTG_PWR = IOMUX_PAD(0x03BC, 0x00A8, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D22__GPIO_3_22 = IOMUX_PAD(0x03BC, 0x00A8, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D22__SPDIF_OUT1 = IOMUX_PAD(0x03BC, 0x00A8, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D22__PL301MX6QPER1_HWRITE = IOMUX_PAD(0x03BC, 0x00A8, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D23__WEIM_WEIM_D_23 = IOMUX_PAD(0x03C0, 0x00AC, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D23__IPU1_DI0_D0_CS = IOMUX_PAD(0x03C0, 0x00AC, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D23__UART3_CTS = IOMUX_PAD(0x03C0, 0x00AC, 2, 0x092C, 0, 0), - MX6Q_PAD_EIM_D23__UART1_DCD = IOMUX_PAD(0x03C0, 0x00AC, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_D23__IPU2_CSI1_DATA_EN = IOMUX_PAD(0x03C0, 0x00AC, 4, 0x08D8, 0, 0), - MX6Q_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D23__IPU1_DI1_PIN2 = IOMUX_PAD(0x03C0, 0x00AC, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D23__IPU1_DI1_PIN14 = IOMUX_PAD(0x03C0, 0x00AC, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB3__WEIM_WEIM_EB_3 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB3__ECSPI4_RDY = IOMUX_PAD(0x03C4, 0x00B0, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB3__UART3_CTS = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB3__UART3_RTS = IOMUX_PAD(0x03C4, 0x00B0, 2, 0x092C, 1, 0), - MX6Q_PAD_EIM_EB3__UART1_RI = IOMUX_PAD(0x03C4, 0x00B0, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB3__IPU2_CSI1_HSYNC = IOMUX_PAD(0x03C4, 0x00B0, 4, 0x08DC, 0, 0), - MX6Q_PAD_EIM_EB3__GPIO_2_31 = IOMUX_PAD(0x03C4, 0x00B0, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB3__IPU1_DI1_PIN3 = IOMUX_PAD(0x03C4, 0x00B0, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB3__SRC_BT_CFG_31 = IOMUX_PAD(0x03C4, 0x00B0, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D24__WEIM_WEIM_D_24 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D24__ECSPI4_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D24__UART3_TXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D24__UART3_TXD_RXD = IOMUX_PAD(0x03C8, 0x00B4, 2, 0x0930, 0, 0), - MX6Q_PAD_EIM_D24__ECSPI1_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 3, 0x0808, 0, 0), - MX6Q_PAD_EIM_D24__ECSPI2_SS2 = IOMUX_PAD(0x03C8, 0x00B4, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D24__GPIO_3_24 = IOMUX_PAD(0x03C8, 0x00B4, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D24__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x03C8, 0x00B4, 6, 0x07D8, 0, 0), - MX6Q_PAD_EIM_D24__UART1_DTR = IOMUX_PAD(0x03C8, 0x00B4, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D25__WEIM_WEIM_D_25 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D25__ECSPI4_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D25__UART3_RXD = IOMUX_PAD(0x03CC, 0x00B8, 2, 0x0930, 1, 0), - MX6Q_PAD_EIM_D25__ECSPI1_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 3, 0x080C, 0, 0), - MX6Q_PAD_EIM_D25__ECSPI2_SS3 = IOMUX_PAD(0x03CC, 0x00B8, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D25__GPIO_3_25 = IOMUX_PAD(0x03CC, 0x00B8, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D25__AUDMUX_AUD5_RXC = IOMUX_PAD(0x03CC, 0x00B8, 6, 0x07D4, 0, 0), - MX6Q_PAD_EIM_D25__UART1_DSR = IOMUX_PAD(0x03CC, 0x00B8, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__WEIM_WEIM_D_26 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__IPU1_DI1_PIN11 = IOMUX_PAD(0x03D0, 0x00BC, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__IPU1_CSI0_D_1 = IOMUX_PAD(0x03D0, 0x00BC, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__IPU2_CSI1_D_14 = IOMUX_PAD(0x03D0, 0x00BC, 3, 0x08C0, 0, 0), - MX6Q_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__UART2_TXD_RXD = IOMUX_PAD(0x03D0, 0x00BC, 4, 0x0928, 0, 0), - MX6Q_PAD_EIM_D26__GPIO_3_26 = IOMUX_PAD(0x03D0, 0x00BC, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__IPU1_SISG_2 = IOMUX_PAD(0x03D0, 0x00BC, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D26__IPU1_DISP1_DAT_22 = IOMUX_PAD(0x03D0, 0x00BC, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D27__WEIM_WEIM_D_27 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D27__IPU1_DI1_PIN13 = IOMUX_PAD(0x03D4, 0x00C0, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D27__IPU1_CSI0_D_0 = IOMUX_PAD(0x03D4, 0x00C0, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D27__IPU2_CSI1_D_13 = IOMUX_PAD(0x03D4, 0x00C0, 3, 0x08BC, 0, 0), - MX6Q_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x03D4, 0x00C0, 4, 0x0928, 1, 0), - MX6Q_PAD_EIM_D27__GPIO_3_27 = IOMUX_PAD(0x03D4, 0x00C0, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D27__IPU1_SISG_3 = IOMUX_PAD(0x03D4, 0x00C0, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D27__IPU1_DISP1_DAT_23 = IOMUX_PAD(0x03D4, 0x00C0, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D28__WEIM_WEIM_D_28 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x03D8, 0x00C4, 17, 0x089C, 0, 0), - MX6Q_PAD_EIM_D28__ECSPI4_MOSI = IOMUX_PAD(0x03D8, 0x00C4, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D28__IPU2_CSI1_D_12 = IOMUX_PAD(0x03D8, 0x00C4, 3, 0x08B8, 0, 0), - MX6Q_PAD_EIM_D28__UART2_CTS = IOMUX_PAD(0x03D8, 0x00C4, 4, 0x0924, 0, 0), - MX6Q_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x03D8, 0x00C4, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D28__IPU1_EXT_TRIG = IOMUX_PAD(0x03D8, 0x00C4, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D28__IPU1_DI0_PIN13 = IOMUX_PAD(0x03D8, 0x00C4, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D29__WEIM_WEIM_D_29 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D29__IPU1_DI1_PIN15 = IOMUX_PAD(0x03DC, 0x00C8, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D29__ECSPI4_SS0 = IOMUX_PAD(0x03DC, 0x00C8, 2, 0x0824, 1, 0), - MX6Q_PAD_EIM_D29__UART2_CTS = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D29__UART2_RTS = IOMUX_PAD(0x03DC, 0x00C8, 4, 0x0924, 1, 0), - MX6Q_PAD_EIM_D29__GPIO_3_29 = IOMUX_PAD(0x03DC, 0x00C8, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D29__IPU2_CSI1_VSYNC = IOMUX_PAD(0x03DC, 0x00C8, 6, 0x08E4, 0, 0), - MX6Q_PAD_EIM_D29__IPU1_DI0_PIN14 = IOMUX_PAD(0x03DC, 0x00C8, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D30__WEIM_WEIM_D_30 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D30__IPU1_DISP1_DAT_21 = IOMUX_PAD(0x03E0, 0x00CC, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D30__IPU1_DI0_PIN11 = IOMUX_PAD(0x03E0, 0x00CC, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D30__IPU1_CSI0_D_3 = IOMUX_PAD(0x03E0, 0x00CC, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_D30__UART3_CTS = IOMUX_PAD(0x03E0, 0x00CC, 4, 0x092C, 2, 0), - MX6Q_PAD_EIM_D30__GPIO_3_30 = IOMUX_PAD(0x03E0, 0x00CC, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D30__USBOH3_USBH1_OC = IOMUX_PAD(0x03E0, 0x00CC, 6, 0x0948, 0, 0), - MX6Q_PAD_EIM_D30__PL301MX6QPER1_HPROT_0 = IOMUX_PAD(0x03E0, 0x00CC, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__WEIM_WEIM_D_31 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__IPU1_DISP1_DAT_20 = IOMUX_PAD(0x03E4, 0x00D0, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__IPU1_DI0_PIN12 = IOMUX_PAD(0x03E4, 0x00D0, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__IPU1_CSI0_D_2 = IOMUX_PAD(0x03E4, 0x00D0, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__UART3_CTS = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__UART3_RTS = IOMUX_PAD(0x03E4, 0x00D0, 4, 0x092C, 3, 0), - MX6Q_PAD_EIM_D31__GPIO_3_31 = IOMUX_PAD(0x03E4, 0x00D0, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__USBOH3_USBH1_PWR = IOMUX_PAD(0x03E4, 0x00D0, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_D31__PL301MX6QPER1_HPROT_1 = IOMUX_PAD(0x03E4, 0x00D0, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A24__WEIM_WEIM_A_24 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A24__IPU1_DISP1_DAT_19 = IOMUX_PAD(0x03E8, 0x00D4, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A24__IPU2_CSI1_D_19 = IOMUX_PAD(0x03E8, 0x00D4, 2, 0x08D4, 1, 0), - MX6Q_PAD_EIM_A24__IPU2_SISG_2 = IOMUX_PAD(0x03E8, 0x00D4, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A24__IPU1_SISG_2 = IOMUX_PAD(0x03E8, 0x00D4, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A24__GPIO_5_4 = IOMUX_PAD(0x03E8, 0x00D4, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A24__PL301MX6QPER1_HPROT_2 = IOMUX_PAD(0x03E8, 0x00D4, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A24__SRC_BT_CFG_24 = IOMUX_PAD(0x03E8, 0x00D4, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A23__WEIM_WEIM_A_23 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A23__IPU1_DISP1_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A23__IPU2_CSI1_D_18 = IOMUX_PAD(0x03EC, 0x00D8, 2, 0x08D0, 1, 0), - MX6Q_PAD_EIM_A23__IPU2_SISG_3 = IOMUX_PAD(0x03EC, 0x00D8, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A23__IPU1_SISG_3 = IOMUX_PAD(0x03EC, 0x00D8, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A23__GPIO_6_6 = IOMUX_PAD(0x03EC, 0x00D8, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A23__PL301MX6QPER1_HPROT_3 = IOMUX_PAD(0x03EC, 0x00D8, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A23__SRC_BT_CFG_23 = IOMUX_PAD(0x03EC, 0x00D8, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A22__WEIM_WEIM_A_22 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A22__IPU1_DISP1_DAT_17 = IOMUX_PAD(0x03F0, 0x00DC, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A22__IPU2_CSI1_D_17 = IOMUX_PAD(0x03F0, 0x00DC, 2, 0x08CC, 1, 0), - MX6Q_PAD_EIM_A22__GPIO_2_16 = IOMUX_PAD(0x03F0, 0x00DC, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A22__TPSMP_HDATA_0 = IOMUX_PAD(0x03F0, 0x00DC, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A22__SRC_BT_CFG_22 = IOMUX_PAD(0x03F0, 0x00DC, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A21__WEIM_WEIM_A_21 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A21__IPU1_DISP1_DAT_16 = IOMUX_PAD(0x03F4, 0x00E0, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A21__IPU2_CSI1_D_16 = IOMUX_PAD(0x03F4, 0x00E0, 2, 0x08C8, 1, 0), - MX6Q_PAD_EIM_A21__RESERVED_RESERVED = IOMUX_PAD(0x03F4, 0x00E0, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A21__MIPI_CORE_DPHY_OUT_18 = IOMUX_PAD(0x03F4, 0x00E0, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A21__GPIO_2_17 = IOMUX_PAD(0x03F4, 0x00E0, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A21__TPSMP_HDATA_1 = IOMUX_PAD(0x03F4, 0x00E0, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A21__SRC_BT_CFG_21 = IOMUX_PAD(0x03F4, 0x00E0, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A20__WEIM_WEIM_A_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A20__IPU1_DISP1_DAT_15 = IOMUX_PAD(0x03F8, 0x00E4, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A20__IPU2_CSI1_D_15 = IOMUX_PAD(0x03F8, 0x00E4, 2, 0x08C4, 1, 0), - MX6Q_PAD_EIM_A20__RESERVED_RESERVED = IOMUX_PAD(0x03F8, 0x00E4, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A20__MIPI_CORE_DPHY_OUT_19 = IOMUX_PAD(0x03F8, 0x00E4, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A20__GPIO_2_18 = IOMUX_PAD(0x03F8, 0x00E4, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A20__TPSMP_HDATA_2 = IOMUX_PAD(0x03F8, 0x00E4, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A20__SRC_BT_CFG_20 = IOMUX_PAD(0x03F8, 0x00E4, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A19__WEIM_WEIM_A_19 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A19__IPU1_DISP1_DAT_14 = IOMUX_PAD(0x03FC, 0x00E8, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A19__IPU2_CSI1_D_14 = IOMUX_PAD(0x03FC, 0x00E8, 2, 0x08C0, 1, 0), - MX6Q_PAD_EIM_A19__RESERVED_RESERVED = IOMUX_PAD(0x03FC, 0x00E8, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A19__MIPI_CORE_DPHY_OUT_20 = IOMUX_PAD(0x03FC, 0x00E8, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A19__GPIO_2_19 = IOMUX_PAD(0x03FC, 0x00E8, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A19__TPSMP_HDATA_3 = IOMUX_PAD(0x03FC, 0x00E8, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A19__SRC_BT_CFG_19 = IOMUX_PAD(0x03FC, 0x00E8, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A18__WEIM_WEIM_A_18 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A18__IPU1_DISP1_DAT_13 = IOMUX_PAD(0x0400, 0x00EC, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A18__IPU2_CSI1_D_13 = IOMUX_PAD(0x0400, 0x00EC, 2, 0x08BC, 1, 0), - MX6Q_PAD_EIM_A18__RESERVED_RESERVED = IOMUX_PAD(0x0400, 0x00EC, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A18__MIPI_CORE_DPHY_OUT_21 = IOMUX_PAD(0x0400, 0x00EC, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A18__GPIO_2_20 = IOMUX_PAD(0x0400, 0x00EC, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A18__TPSMP_HDATA_4 = IOMUX_PAD(0x0400, 0x00EC, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A18__SRC_BT_CFG_18 = IOMUX_PAD(0x0400, 0x00EC, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A17__WEIM_WEIM_A_17 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A17__IPU1_DISP1_DAT_12 = IOMUX_PAD(0x0404, 0x00F0, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A17__IPU2_CSI1_D_12 = IOMUX_PAD(0x0404, 0x00F0, 2, 0x08B8, 1, 0), - MX6Q_PAD_EIM_A17__RESERVED_RESERVED = IOMUX_PAD(0x0404, 0x00F0, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_A17__MIPI_CORE_DPHY_OUT_22 = IOMUX_PAD(0x0404, 0x00F0, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A17__GPIO_2_21 = IOMUX_PAD(0x0404, 0x00F0, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A17__TPSMP_HDATA_5 = IOMUX_PAD(0x0404, 0x00F0, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A17__SRC_BT_CFG_17 = IOMUX_PAD(0x0404, 0x00F0, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_A16__WEIM_WEIM_A_16 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_A16__IPU1_DI1_DISP_CLK = IOMUX_PAD(0x0408, 0x00F4, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_A16__IPU2_CSI1_PIXCLK = IOMUX_PAD(0x0408, 0x00F4, 2, 0x08E0, 1, 0), - MX6Q_PAD_EIM_A16__MIPI_CORE_DPHY_OUT_23 = IOMUX_PAD(0x0408, 0x00F4, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_A16__GPIO_2_22 = IOMUX_PAD(0x0408, 0x00F4, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_A16__TPSMP_HDATA_6 = IOMUX_PAD(0x0408, 0x00F4, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_A16__SRC_BT_CFG_16 = IOMUX_PAD(0x0408, 0x00F4, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS0__WEIM_WEIM_CS_0 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS0__IPU1_DI1_PIN5 = IOMUX_PAD(0x040C, 0x00F8, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS0__ECSPI2_SCLK = IOMUX_PAD(0x040C, 0x00F8, 2, 0x0810, 0, 0), - MX6Q_PAD_EIM_CS0__MIPI_CORE_DPHY_OUT_24 = IOMUX_PAD(0x040C, 0x00F8, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS0__GPIO_2_23 = IOMUX_PAD(0x040C, 0x00F8, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS0__TPSMP_HDATA_7 = IOMUX_PAD(0x040C, 0x00F8, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS1__WEIM_WEIM_CS_1 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS1__IPU1_DI1_PIN6 = IOMUX_PAD(0x0410, 0x00FC, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS1__ECSPI2_MOSI = IOMUX_PAD(0x0410, 0x00FC, 2, 0x0818, 0, 0), - MX6Q_PAD_EIM_CS1__MIPI_CORE_DPHY_OUT_25 = IOMUX_PAD(0x0410, 0x00FC, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS1__GPIO_2_24 = IOMUX_PAD(0x0410, 0x00FC, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_CS1__TPSMP_HDATA_8 = IOMUX_PAD(0x0410, 0x00FC, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_OE__WEIM_WEIM_OE = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_OE__IPU1_DI1_PIN7 = IOMUX_PAD(0x0414, 0x0100, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_OE__ECSPI2_MISO = IOMUX_PAD(0x0414, 0x0100, 2, 0x0814, 0, 0), - MX6Q_PAD_EIM_OE__MIPI_CORE_DPHY_OUT_26 = IOMUX_PAD(0x0414, 0x0100, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_OE__GPIO_2_25 = IOMUX_PAD(0x0414, 0x0100, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_OE__TPSMP_HDATA_9 = IOMUX_PAD(0x0414, 0x0100, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_RW__WEIM_WEIM_RW = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_RW__IPU1_DI1_PIN8 = IOMUX_PAD(0x0418, 0x0104, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_RW__ECSPI2_SS0 = IOMUX_PAD(0x0418, 0x0104, 2, 0x081C, 0, 0), - MX6Q_PAD_EIM_RW__MIPI_CORE_DPHY_OUT_27 = IOMUX_PAD(0x0418, 0x0104, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_RW__GPIO_2_26 = IOMUX_PAD(0x0418, 0x0104, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_RW__TPSMP_HDATA_10 = IOMUX_PAD(0x0418, 0x0104, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_RW__SRC_BT_CFG_29 = IOMUX_PAD(0x0418, 0x0104, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_LBA__WEIM_WEIM_LBA = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_LBA__IPU1_DI1_PIN17 = IOMUX_PAD(0x041C, 0x0108, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_LBA__ECSPI2_SS1 = IOMUX_PAD(0x041C, 0x0108, 2, 0x0820, 0, 0), - MX6Q_PAD_EIM_LBA__GPIO_2_27 = IOMUX_PAD(0x041C, 0x0108, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_LBA__TPSMP_HDATA_11 = IOMUX_PAD(0x041C, 0x0108, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_LBA__SRC_BT_CFG_26 = IOMUX_PAD(0x041C, 0x0108, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB0__WEIM_WEIM_EB_0 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB0__IPU1_DISP1_DAT_11 = IOMUX_PAD(0x0420, 0x010C, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB0__IPU2_CSI1_D_11 = IOMUX_PAD(0x0420, 0x010C, 2, 0x08B4, 1, 0), - MX6Q_PAD_EIM_EB0__MIPI_CORE_DPHY_OUT_0 = IOMUX_PAD(0x0420, 0x010C, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB0__CCM_PMIC_RDY = IOMUX_PAD(0x0420, 0x010C, 4, 0x07F0, 0, 0), - MX6Q_PAD_EIM_EB0__GPIO_2_28 = IOMUX_PAD(0x0420, 0x010C, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB0__TPSMP_HDATA_12 = IOMUX_PAD(0x0420, 0x010C, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB0__SRC_BT_CFG_27 = IOMUX_PAD(0x0420, 0x010C, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB1__WEIM_WEIM_EB_1 = IOMUX_PAD(0x0424, 0x0110, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB1__IPU1_DISP1_DAT_10 = IOMUX_PAD(0x0424, 0x0110, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB1__IPU2_CSI1_D_10 = IOMUX_PAD(0x0424, 0x0110, 2, 0x08B0, 1, 0), - MX6Q_PAD_EIM_EB1__MIPI_CORE_DPHY__OUT_1 = IOMUX_PAD(0x0424, 0x0110, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB1__GPIO_2_29 = IOMUX_PAD(0x0424, 0x0110, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB1__TPSMP_HDATA_13 = IOMUX_PAD(0x0424, 0x0110, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_EB1__SRC_BT_CFG_28 = IOMUX_PAD(0x0424, 0x0110, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA0__WEIM_WEIM_DA_A_0 = IOMUX_PAD(0x0428, 0x0114, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA0__IPU1_DISP1_DAT_9 = IOMUX_PAD(0x0428, 0x0114, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA0__IPU2_CSI1_D_9 = IOMUX_PAD(0x0428, 0x0114, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA0__MIPI_CORE_DPHY__OUT_2 = IOMUX_PAD(0x0428, 0x0114, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA0__GPIO_3_0 = IOMUX_PAD(0x0428, 0x0114, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA0__TPSMP_HDATA_14 = IOMUX_PAD(0x0428, 0x0114, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA0__SRC_BT_CFG_0 = IOMUX_PAD(0x0428, 0x0114, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__WEIM_WEIM_DA_A_1 = IOMUX_PAD(0x042C, 0x0118, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__IPU1_DISP1_DAT_8 = IOMUX_PAD(0x042C, 0x0118, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__IPU2_CSI1_D_8 = IOMUX_PAD(0x042C, 0x0118, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__MIPI_CORE_DPHY_OUT_3 = IOMUX_PAD(0x042C, 0x0118, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__USBPHY1_TX_LS_MODE = IOMUX_PAD(0x042C, 0x0118, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__GPIO_3_1 = IOMUX_PAD(0x042C, 0x0118, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__TPSMP_HDATA_15 = IOMUX_PAD(0x042C, 0x0118, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA1__SRC_BT_CFG_1 = IOMUX_PAD(0x042C, 0x0118, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__WEIM_WEIM_DA_A_2 = IOMUX_PAD(0x0430, 0x011C, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__IPU1_DISP1_DAT_7 = IOMUX_PAD(0x0430, 0x011C, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__IPU2_CSI1_D_7 = IOMUX_PAD(0x0430, 0x011C, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__MIPI_CORE_DPHY_OUT_4 = IOMUX_PAD(0x0430, 0x011C, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__USBPHY1_TX_HS_MODE = IOMUX_PAD(0x0430, 0x011C, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__GPIO_3_2 = IOMUX_PAD(0x0430, 0x011C, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__TPSMP_HDATA_16 = IOMUX_PAD(0x0430, 0x011C, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA2__SRC_BT_CFG_2 = IOMUX_PAD(0x0430, 0x011C, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__WEIM_WEIM_DA_A_3 = IOMUX_PAD(0x0434, 0x0120, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__IPU1_DISP1_DAT_6 = IOMUX_PAD(0x0434, 0x0120, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__IPU2_CSI1_D_6 = IOMUX_PAD(0x0434, 0x0120, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__MIPI_CORE_DPHY_OUT_5 = IOMUX_PAD(0x0434, 0x0120, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__USBPHY1_TX_HIZ = IOMUX_PAD(0x0434, 0x0120, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__GPIO_3_3 = IOMUX_PAD(0x0434, 0x0120, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__TPSMP_HDATA_17 = IOMUX_PAD(0x0434, 0x0120, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA3__SRC_BT_CFG_3 = IOMUX_PAD(0x0434, 0x0120, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__WEIM_WEIM_DA_A_4 = IOMUX_PAD(0x0438, 0x0124, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__IPU1_DISP1_DAT_5 = IOMUX_PAD(0x0438, 0x0124, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__IPU2_CSI1_D_5 = IOMUX_PAD(0x0438, 0x0124, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__MIPI_CORE_DPHY_OUT_6 = IOMUX_PAD(0x0438, 0x0124, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__ANATOP_USBPHY1_TX_EN = IOMUX_PAD(0x0438, 0x0124, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__GPIO_3_4 = IOMUX_PAD(0x0438, 0x0124, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__TPSMP_HDATA_18 = IOMUX_PAD(0x0438, 0x0124, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA4__SRC_BT_CFG_4 = IOMUX_PAD(0x0438, 0x0124, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__WEIM_WEIM_DA_A_5 = IOMUX_PAD(0x043C, 0x0128, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__IPU1_DISP1_DAT_4 = IOMUX_PAD(0x043C, 0x0128, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__IPU2_CSI1_D_4 = IOMUX_PAD(0x043C, 0x0128, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__MIPI_CORE_DPHY_OUT_7 = IOMUX_PAD(0x043C, 0x0128, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__ANATOP_USBPHY1_TX_DP = IOMUX_PAD(0x043C, 0x0128, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__GPIO_3_5 = IOMUX_PAD(0x043C, 0x0128, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__TPSMP_HDATA_19 = IOMUX_PAD(0x043C, 0x0128, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA5__SRC_BT_CFG_5 = IOMUX_PAD(0x043C, 0x0128, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__WEIM_WEIM_DA_A_6 = IOMUX_PAD(0x0440, 0x012C, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__IPU1_DISP1_DAT_3 = IOMUX_PAD(0x0440, 0x012C, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__IPU2_CSI1_D_3 = IOMUX_PAD(0x0440, 0x012C, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__MIPI_CORE_DPHY_OUT_8 = IOMUX_PAD(0x0440, 0x012C, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__ANATOP_USBPHY1_TX_DN = IOMUX_PAD(0x0440, 0x012C, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__GPIO_3_6 = IOMUX_PAD(0x0440, 0x012C, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__TPSMP_HDATA_20 = IOMUX_PAD(0x0440, 0x012C, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA6__SRC_BT_CFG_6 = IOMUX_PAD(0x0440, 0x012C, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA7__WEIM_WEIM_DA_A_7 = IOMUX_PAD(0x0444, 0x0130, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA7__IPU1_DISP1_DAT_2 = IOMUX_PAD(0x0444, 0x0130, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA7__IPU2_CSI1_D_2 = IOMUX_PAD(0x0444, 0x0130, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA7__MIPI_CORE_DPHY_OUT_9 = IOMUX_PAD(0x0444, 0x0130, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA7__GPIO_3_7 = IOMUX_PAD(0x0444, 0x0130, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA7__TPSMP_HDATA_21 = IOMUX_PAD(0x0444, 0x0130, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA7__SRC_BT_CFG_7 = IOMUX_PAD(0x0444, 0x0130, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA8__WEIM_WEIM_DA_A_8 = IOMUX_PAD(0x0448, 0x0134, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA8__IPU1_DISP1_DAT_1 = IOMUX_PAD(0x0448, 0x0134, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA8__IPU2_CSI1_D_1 = IOMUX_PAD(0x0448, 0x0134, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA8__MIPI_CORE_DPHY_OUT_10 = IOMUX_PAD(0x0448, 0x0134, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA8__GPIO_3_8 = IOMUX_PAD(0x0448, 0x0134, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA8__TPSMP_HDATA_22 = IOMUX_PAD(0x0448, 0x0134, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA8__SRC_BT_CFG_8 = IOMUX_PAD(0x0448, 0x0134, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA9__WEIM_WEIM_DA_A_9 = IOMUX_PAD(0x044C, 0x0138, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA9__IPU1_DISP1_DAT_0 = IOMUX_PAD(0x044C, 0x0138, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA9__IPU2_CSI1_D_0 = IOMUX_PAD(0x044C, 0x0138, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA9__MIPI_CORE_DPHY_OUT_11 = IOMUX_PAD(0x044C, 0x0138, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA9__GPIO_3_9 = IOMUX_PAD(0x044C, 0x0138, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA9__TPSMP_HDATA_23 = IOMUX_PAD(0x044C, 0x0138, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA9__SRC_BT_CFG_9 = IOMUX_PAD(0x044C, 0x0138, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA10__WEIM_WEIM_DA_A_10 = IOMUX_PAD(0x0450, 0x013C, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA10__IPU1_DI1_PIN15 = IOMUX_PAD(0x0450, 0x013C, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA10__IPU2_CSI1_DATA_EN = IOMUX_PAD(0x0450, 0x013C, 2, 0x08D8, 1, 0), - MX6Q_PAD_EIM_DA10__MIPI_CORE_DPHY_OUT12 = IOMUX_PAD(0x0450, 0x013C, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA10__GPIO_3_10 = IOMUX_PAD(0x0450, 0x013C, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA10__TPSMP_HDATA_24 = IOMUX_PAD(0x0450, 0x013C, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA10__SRC_BT_CFG_10 = IOMUX_PAD(0x0450, 0x013C, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA11__WEIM_WEIM_DA_A_11 = IOMUX_PAD(0x0454, 0x0140, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA11__IPU1_DI1_PIN2 = IOMUX_PAD(0x0454, 0x0140, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA11__IPU2_CSI1_HSYNC = IOMUX_PAD(0x0454, 0x0140, 2, 0x08DC, 1, 0), - MX6Q_PAD_EIM_DA11__MIPI_CORE_DPHY_OUT13 = IOMUX_PAD(0x0454, 0x0140, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA11__SDMA_DBG_EVT_CHN_6 = IOMUX_PAD(0x0454, 0x0140, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA11__GPIO_3_11 = IOMUX_PAD(0x0454, 0x0140, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA11__TPSMP_HDATA_25 = IOMUX_PAD(0x0454, 0x0140, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA11__SRC_BT_CFG_11 = IOMUX_PAD(0x0454, 0x0140, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA12__WEIM_WEIM_DA_A_12 = IOMUX_PAD(0x0458, 0x0144, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA12__IPU1_DI1_PIN3 = IOMUX_PAD(0x0458, 0x0144, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA12__IPU2_CSI1_VSYNC = IOMUX_PAD(0x0458, 0x0144, 2, 0x08E4, 1, 0), - MX6Q_PAD_EIM_DA12__MIPI_CORE_DPHY_OUT14 = IOMUX_PAD(0x0458, 0x0144, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA12__SDMA_DEBUG_EVT_CHN_3 = IOMUX_PAD(0x0458, 0x0144, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA12__GPIO_3_12 = IOMUX_PAD(0x0458, 0x0144, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA12__TPSMP_HDATA_26 = IOMUX_PAD(0x0458, 0x0144, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA12__SRC_BT_CFG_12 = IOMUX_PAD(0x0458, 0x0144, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA13__WEIM_WEIM_DA_A_13 = IOMUX_PAD(0x045C, 0x0148, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA13__IPU1_DI1_D0_CS = IOMUX_PAD(0x045C, 0x0148, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA13__CCM_DI1_EXT_CLK = IOMUX_PAD(0x045C, 0x0148, 2, 0x07EC, 1, 0), - MX6Q_PAD_EIM_DA13__MIPI_CORE_DPHY_OUT15 = IOMUX_PAD(0x045C, 0x0148, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA13__SDMA_DEBUG_EVT_CHN_4 = IOMUX_PAD(0x045C, 0x0148, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA13__GPIO_3_13 = IOMUX_PAD(0x045C, 0x0148, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA13__TPSMP_HDATA_27 = IOMUX_PAD(0x045C, 0x0148, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA13__SRC_BT_CFG_13 = IOMUX_PAD(0x045C, 0x0148, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__WEIM_WEIM_DA_A_14 = IOMUX_PAD(0x0460, 0x014C, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__IPU1_DI1_D1_CS = IOMUX_PAD(0x0460, 0x014C, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__CCM_DI0_EXT_CLK = IOMUX_PAD(0x0460, 0x014C, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__MIPI_CORE_DPHY_OUT16 = IOMUX_PAD(0x0460, 0x014C, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__SDMA_DEBUG_EVT_CHN_5 = IOMUX_PAD(0x0460, 0x014C, 4, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__GPIO_3_14 = IOMUX_PAD(0x0460, 0x014C, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__TPSMP_HDATA_28 = IOMUX_PAD(0x0460, 0x014C, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA14__SRC_BT_CFG_14 = IOMUX_PAD(0x0460, 0x014C, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA15__WEIM_WEIM_DA_A_15 = IOMUX_PAD(0x0464, 0x0150, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN1 = IOMUX_PAD(0x0464, 0x0150, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA15__IPU1_DI1_PIN4 = IOMUX_PAD(0x0464, 0x0150, 2, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA15__MIPI_CORE_DPHY_OUT17 = IOMUX_PAD(0x0464, 0x0150, 3, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA15__GPIO_3_15 = IOMUX_PAD(0x0464, 0x0150, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA15__TPSMP_HDATA_29 = IOMUX_PAD(0x0464, 0x0150, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_DA15__SRC_BT_CFG_15 = IOMUX_PAD(0x0464, 0x0150, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_WAIT__WEIM_WEIM_WAIT = IOMUX_PAD(0x0468, 0x0154, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_WAIT__WEIM_WEIM_DTACK_B = IOMUX_PAD(0x0468, 0x0154, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_WAIT__GPIO_5_0 = IOMUX_PAD(0x0468, 0x0154, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_WAIT__TPSMP_HDATA_30 = IOMUX_PAD(0x0468, 0x0154, 6, 0x0000, 0, 0), - MX6Q_PAD_EIM_WAIT__SRC_BT_CFG_25 = IOMUX_PAD(0x0468, 0x0154, 7, 0x0000, 0, 0), - MX6Q_PAD_EIM_BCLK__WEIM_WEIM_BCLK = IOMUX_PAD(0x046C, 0x0158, 0, 0x0000, 0, 0), - MX6Q_PAD_EIM_BCLK__IPU1_DI1_PIN16 = IOMUX_PAD(0x046C, 0x0158, 1, 0x0000, 0, 0), - MX6Q_PAD_EIM_BCLK__GPIO_6_31 = IOMUX_PAD(0x046C, 0x0158, 5, 0x0000, 0, 0), - MX6Q_PAD_EIM_BCLK__TPSMP_HDATA_31 = IOMUX_PAD(0x046C, 0x0158, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK = IOMUX_PAD(0x0470, 0x015C, 1, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__MIPI_CR_DPY_OT28 = IOMUX_PAD(0x0470, 0x015C, 3, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__SDMA_DBG_CR_STA0 = IOMUX_PAD(0x0470, 0x015C, 4, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__GPIO_4_16 = IOMUX_PAD(0x0470, 0x015C, 5, 0x0000, 0, 0), - MX6Q_PAD_DI0_DISP_CLK__MMDC_DEBUG_0 = IOMUX_PAD(0x0470, 0x015C, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DI0_PIN15__IPU2_DI0_PIN15 = IOMUX_PAD(0x0474, 0x0160, 1, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN15__AUDMUX_AUD6_TXC = IOMUX_PAD(0x0474, 0x0160, 2, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN15__MIPI_CR_DPHY_OUT_29 = IOMUX_PAD(0x0474, 0x0160, 3, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN15__SDMA_DBG_CORE_STA_1 = IOMUX_PAD(0x0474, 0x0160, 4, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN15__GPIO_4_17 = IOMUX_PAD(0x0474, 0x0160, 5, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN15__MMDC_MMDC_DEBUG_1 = IOMUX_PAD(0x0474, 0x0160, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DI0_PIN2__IPU2_DI0_PIN2 = IOMUX_PAD(0x0478, 0x0164, 1, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__AUDMUX_AUD6_TXD = IOMUX_PAD(0x0478, 0x0164, 2, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__MIPI_CR_DPHY_OUT_30 = IOMUX_PAD(0x0478, 0x0164, 3, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__SDMA_DBG_CORE_STA_2 = IOMUX_PAD(0x0478, 0x0164, 4, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__GPIO_4_18 = IOMUX_PAD(0x0478, 0x0164, 5, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__MMDC_DEBUG_2 = IOMUX_PAD(0x0478, 0x0164, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN2__PL301_PER1_HADDR_9 = IOMUX_PAD(0x0478, 0x0164, 7, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DI0_PIN3__IPU2_DI0_PIN3 = IOMUX_PAD(0x047C, 0x0168, 1, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS = IOMUX_PAD(0x047C, 0x0168, 2, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__MIPI_CORE_DPHY_OUT31 = IOMUX_PAD(0x047C, 0x0168, 3, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__SDMA_DBG_CORE_STA_3 = IOMUX_PAD(0x047C, 0x0168, 4, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__GPIO_4_19 = IOMUX_PAD(0x047C, 0x0168, 5, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__MMDC_MMDC_DEBUG_3 = IOMUX_PAD(0x047C, 0x0168, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN3__PL301_PER1_HADDR_10 = IOMUX_PAD(0x047C, 0x0168, 7, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN4__IPU1_DI0_PIN4 = IOMUX_PAD(0x0480, 0x016C, 0, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN4__IPU2_DI0_PIN4 = IOMUX_PAD(0x0480, 0x016C, 1, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN4__AUDMUX_AUD6_RXD = IOMUX_PAD(0x0480, 0x016C, 2, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN4__USDHC1_WP = IOMUX_PAD(0x0480, 0x016C, 3, 0x094C, 0, 0), - MX6Q_PAD_DI0_PIN4__SDMA_DEBUG_YIELD = IOMUX_PAD(0x0480, 0x016C, 4, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x0480, 0x016C, 5, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DI0_PIN4__MMDC_MMDC_DEBUG_4 = IOMUX_PAD(0x0480, 0x016C, 6, 0x0000, 0, 0), - MX6Q_PAD_DI0_PIN4__PL301_PER1_HADDR_11 = IOMUX_PAD(0x0480, 0x016C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT0__IPU2_DISP0_DAT_0 = IOMUX_PAD(0x0484, 0x0170, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT0__ECSPI3_SCLK = IOMUX_PAD(0x0484, 0x0170, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT0__USDHC1_USDHC_DBG_0 = IOMUX_PAD(0x0484, 0x0170, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT0__SDMA_DBG_CORE_RUN = IOMUX_PAD(0x0484, 0x0170, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT0__GPIO_4_21 = IOMUX_PAD(0x0484, 0x0170, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT0__MMDC_MMDC_DEBUG_5 = IOMUX_PAD(0x0484, 0x0170, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT1__IPU2_DISP0_DAT_1 = IOMUX_PAD(0x0488, 0x0174, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__ECSPI3_MOSI = IOMUX_PAD(0x0488, 0x0174, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__USDHC1_USDHC_DBG_1 = IOMUX_PAD(0x0488, 0x0174, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__SDMA_DBG_EVT_CHNSL = IOMUX_PAD(0x0488, 0x0174, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__GPIO_4_22 = IOMUX_PAD(0x0488, 0x0174, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__MMDC_DEBUG_6 = IOMUX_PAD(0x0488, 0x0174, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT1__PL301_PER1_HADR_12 = IOMUX_PAD(0x0488, 0x0174, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT2__IPU2_DISP0_DAT_2 = IOMUX_PAD(0x048C, 0x0178, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__ECSPI3_MISO = IOMUX_PAD(0x048C, 0x0178, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__USDHC1_USDHC_DBG_2 = IOMUX_PAD(0x048C, 0x0178, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__SDMA_DEBUG_MODE = IOMUX_PAD(0x048C, 0x0178, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__GPIO_4_23 = IOMUX_PAD(0x048C, 0x0178, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__MMDC_DEBUG_7 = IOMUX_PAD(0x048C, 0x0178, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT2__PL301_PER1_HADR_13 = IOMUX_PAD(0x048C, 0x0178, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT3__IPU2_DISP0_DAT_3 = IOMUX_PAD(0x0490, 0x017C, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__ECSPI3_SS0 = IOMUX_PAD(0x0490, 0x017C, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__USDHC1_USDHC_DBG_3 = IOMUX_PAD(0x0490, 0x017C, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__SDMA_DBG_BUS_ERROR = IOMUX_PAD(0x0490, 0x017C, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__GPIO_4_24 = IOMUX_PAD(0x0490, 0x017C, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__MMDC_MMDC_DBG_8 = IOMUX_PAD(0x0490, 0x017C, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT3__PL301_PER1_HADR_14 = IOMUX_PAD(0x0490, 0x017C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT4__IPU2_DISP0_DAT_4 = IOMUX_PAD(0x0494, 0x0180, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__ECSPI3_SS1 = IOMUX_PAD(0x0494, 0x0180, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__USDHC1_USDHC_DBG_4 = IOMUX_PAD(0x0494, 0x0180, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__SDMA_DEBUG_BUS_RWB = IOMUX_PAD(0x0494, 0x0180, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__GPIO_4_25 = IOMUX_PAD(0x0494, 0x0180, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__MMDC_MMDC_DEBUG_9 = IOMUX_PAD(0x0494, 0x0180, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT4__PL301_PER1_HADR_15 = IOMUX_PAD(0x0494, 0x0180, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT5__IPU2_DISP0_DAT_5 = IOMUX_PAD(0x0498, 0x0184, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__ECSPI3_SS2 = IOMUX_PAD(0x0498, 0x0184, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__AUDMUX_AUD6_RXFS = IOMUX_PAD(0x0498, 0x0184, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__SDMA_DBG_MCH_DMBUS = IOMUX_PAD(0x0498, 0x0184, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__GPIO_4_26 = IOMUX_PAD(0x0498, 0x0184, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__MMDC_DEBUG_10 = IOMUX_PAD(0x0498, 0x0184, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT5__PL301_PER1_HADR_16 = IOMUX_PAD(0x0498, 0x0184, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT6__IPU2_DISP0_DAT_6 = IOMUX_PAD(0x049C, 0x0188, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__ECSPI3_SS3 = IOMUX_PAD(0x049C, 0x0188, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__AUDMUX_AUD6_RXC = IOMUX_PAD(0x049C, 0x0188, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__SDMA_DBG_RTBUF_WRT = IOMUX_PAD(0x049C, 0x0188, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__GPIO_4_27 = IOMUX_PAD(0x049C, 0x0188, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__MMDC_DEBUG_11 = IOMUX_PAD(0x049C, 0x0188, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT6__PL301_PER1_HADR_17 = IOMUX_PAD(0x049C, 0x0188, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT7__IPU2_DISP0_DAT_7 = IOMUX_PAD(0x04A0, 0x018C, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__ECSPI3_RDY = IOMUX_PAD(0x04A0, 0x018C, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__USDHC1_USDHC_DBG_5 = IOMUX_PAD(0x04A0, 0x018C, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__SDMA_DBG_EVT_CHN_0 = IOMUX_PAD(0x04A0, 0x018C, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__GPIO_4_28 = IOMUX_PAD(0x04A0, 0x018C, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__MMDC_DEBUG_12 = IOMUX_PAD(0x04A0, 0x018C, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT7__PL301_PER1_HADR_18 = IOMUX_PAD(0x04A0, 0x018C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT8__IPU2_DISP0_DAT_8 = IOMUX_PAD(0x04A4, 0x0190, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__PWM1_PWMO = IOMUX_PAD(0x04A4, 0x0190, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__WDOG1_WDOG_B = IOMUX_PAD(0x04A4, 0x0190, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__SDMA_DBG_EVT_CHN_1 = IOMUX_PAD(0x04A4, 0x0190, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__GPIO_4_29 = IOMUX_PAD(0x04A4, 0x0190, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__MMDC_DEBUG_13 = IOMUX_PAD(0x04A4, 0x0190, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT8__PL301_PER1_HADR_19 = IOMUX_PAD(0x04A4, 0x0190, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT9__IPU2_DISP0_DAT_9 = IOMUX_PAD(0x04A8, 0x0194, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__PWM2_PWMO = IOMUX_PAD(0x04A8, 0x0194, 2, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__WDOG2_WDOG_B = IOMUX_PAD(0x04A8, 0x0194, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__SDMA_DBG_EVT_CHN_2 = IOMUX_PAD(0x04A8, 0x0194, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__GPIO_4_30 = IOMUX_PAD(0x04A8, 0x0194, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__MMDC_DEBUG_14 = IOMUX_PAD(0x04A8, 0x0194, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT9__PL301_PER1_HADR_20 = IOMUX_PAD(0x04A8, 0x0194, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT10__IPU2_DISP0_DAT_10 = IOMUX_PAD(0x04AC, 0x0198, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT10__USDHC1_DBG_6 = IOMUX_PAD(0x04AC, 0x0198, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT10__SDMA_DBG_EVT_CHN3 = IOMUX_PAD(0x04AC, 0x0198, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT10__GPIO_4_31 = IOMUX_PAD(0x04AC, 0x0198, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT10__MMDC_DEBUG_15 = IOMUX_PAD(0x04AC, 0x0198, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT10__PL301_PER1_HADR21 = IOMUX_PAD(0x04AC, 0x0198, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT11__IPU2_DISP0_DAT_11 = IOMUX_PAD(0x04B0, 0x019C, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT11__USDHC1_USDHC_DBG7 = IOMUX_PAD(0x04B0, 0x019C, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT11__SDMA_DBG_EVT_CHN4 = IOMUX_PAD(0x04B0, 0x019C, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT11__GPIO_5_5 = IOMUX_PAD(0x04B0, 0x019C, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT11__MMDC_DEBUG_16 = IOMUX_PAD(0x04B0, 0x019C, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT11__PL301_PER1_HADR22 = IOMUX_PAD(0x04B0, 0x019C, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT12__IPU2_DISP0_DAT_12 = IOMUX_PAD(0x04B4, 0x01A0, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT12__RESERVED_RESERVED = IOMUX_PAD(0x04B4, 0x01A0, 3, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT12__SDMA_DBG_EVT_CHN5 = IOMUX_PAD(0x04B4, 0x01A0, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT12__GPIO_5_6 = IOMUX_PAD(0x04B4, 0x01A0, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT12__MMDC_DEBUG_17 = IOMUX_PAD(0x04B4, 0x01A0, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT12__PL301_PER1_HADR23 = IOMUX_PAD(0x04B4, 0x01A0, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT13__IPU2_DISP0_DAT_13 = IOMUX_PAD(0x04B8, 0x01A4, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT13__AUDMUX_AUD5_RXFS = IOMUX_PAD(0x04B8, 0x01A4, 3, 0x07D8, 1, 0), - MX6Q_PAD_DISP0_DAT13__SDMA_DBG_EVT_CHN0 = IOMUX_PAD(0x04B8, 0x01A4, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT13__GPIO_5_7 = IOMUX_PAD(0x04B8, 0x01A4, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT13__MMDC_DEBUG_18 = IOMUX_PAD(0x04B8, 0x01A4, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT13__PL301_PER1_HADR24 = IOMUX_PAD(0x04B8, 0x01A4, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT14__IPU2_DISP0_DAT_14 = IOMUX_PAD(0x04BC, 0x01A8, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT14__AUDMUX_AUD5_RXC = IOMUX_PAD(0x04BC, 0x01A8, 3, 0x07D4, 1, 0), - MX6Q_PAD_DISP0_DAT14__SDMA_DBG_EVT_CHN1 = IOMUX_PAD(0x04BC, 0x01A8, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT14__GPIO_5_8 = IOMUX_PAD(0x04BC, 0x01A8, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT14__MMDC_DEBUG_19 = IOMUX_PAD(0x04BC, 0x01A8, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT15__IPU2_DISP0_DAT_15 = IOMUX_PAD(0x04C0, 0x01AC, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT15__ECSPI1_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 2, 0x0804, 1, 0), - MX6Q_PAD_DISP0_DAT15__ECSPI2_SS1 = IOMUX_PAD(0x04C0, 0x01AC, 3, 0x0820, 1, 0), - MX6Q_PAD_DISP0_DAT15__SDMA_DBG_EVT_CHN2 = IOMUX_PAD(0x04C0, 0x01AC, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT15__GPIO_5_9 = IOMUX_PAD(0x04C0, 0x01AC, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT15__MMDC_DEBUG_20 = IOMUX_PAD(0x04C0, 0x01AC, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT15__PL301_PER1_HADR25 = IOMUX_PAD(0x04C0, 0x01AC, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT16__IPU2_DISP0_DAT_16 = IOMUX_PAD(0x04C4, 0x01B0, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT16__ECSPI2_MOSI = IOMUX_PAD(0x04C4, 0x01B0, 2, 0x0818, 1, 0), - MX6Q_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC = IOMUX_PAD(0x04C4, 0x01B0, 3, 0x07DC, 0, 0), - MX6Q_PAD_DISP0_DAT16__SDMA_EXT_EVENT_0 = IOMUX_PAD(0x04C4, 0x01B0, 4, 0x090C, 0, 0), - MX6Q_PAD_DISP0_DAT16__GPIO_5_10 = IOMUX_PAD(0x04C4, 0x01B0, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT16__MMDC_DEBUG_21 = IOMUX_PAD(0x04C4, 0x01B0, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT16__PL301_PER1_HADR26 = IOMUX_PAD(0x04C4, 0x01B0, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT17__IPU2_DISP0_DAT_17 = IOMUX_PAD(0x04C8, 0x01B4, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT17__ECSPI2_MISO = IOMUX_PAD(0x04C8, 0x01B4, 2, 0x0814, 1, 0), - MX6Q_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD = IOMUX_PAD(0x04C8, 0x01B4, 3, 0x07D0, 0, 0), - MX6Q_PAD_DISP0_DAT17__SDMA_EXT_EVENT_1 = IOMUX_PAD(0x04C8, 0x01B4, 4, 0x0910, 0, 0), - MX6Q_PAD_DISP0_DAT17__GPIO_5_11 = IOMUX_PAD(0x04C8, 0x01B4, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT17__MMDC_DEBUG_22 = IOMUX_PAD(0x04C8, 0x01B4, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT17__PL301_PER1_HADR27 = IOMUX_PAD(0x04C8, 0x01B4, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT18__IPU2_DISP0_DAT_18 = IOMUX_PAD(0x04CC, 0x01B8, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT18__ECSPI2_SS0 = IOMUX_PAD(0x04CC, 0x01B8, 2, 0x081C, 1, 0), - MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x04CC, 0x01B8, 3, 0x07E0, 0, 0), - MX6Q_PAD_DISP0_DAT18__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x04CC, 0x01B8, 4, 0x07C0, 0, 0), - MX6Q_PAD_DISP0_DAT18__GPIO_5_12 = IOMUX_PAD(0x04CC, 0x01B8, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT18__MMDC_DEBUG_23 = IOMUX_PAD(0x04CC, 0x01B8, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT18__WEIM_WEIM_CS_2 = IOMUX_PAD(0x04CC, 0x01B8, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT19__IPU2_DISP0_DAT_19 = IOMUX_PAD(0x04D0, 0x01BC, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT19__ECSPI2_SCLK = IOMUX_PAD(0x04D0, 0x01BC, 2, 0x0810, 1, 0), - MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD = IOMUX_PAD(0x04D0, 0x01BC, 3, 0x07CC, 0, 0), - MX6Q_PAD_DISP0_DAT19__AUDMUX_AUD4_RXC = IOMUX_PAD(0x04D0, 0x01BC, 4, 0x07BC, 0, 0), - MX6Q_PAD_DISP0_DAT19__GPIO_5_13 = IOMUX_PAD(0x04D0, 0x01BC, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT19__MMDC_DEBUG_24 = IOMUX_PAD(0x04D0, 0x01BC, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT19__WEIM_WEIM_CS_3 = IOMUX_PAD(0x04D0, 0x01BC, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT20__IPU2_DISP0_DAT_20 = IOMUX_PAD(0x04D4, 0x01C0, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT20__ECSPI1_SCLK = IOMUX_PAD(0x04D4, 0x01C0, 2, 0x07F4, 1, 0), - MX6Q_PAD_DISP0_DAT20__AUDMUX_AUD4_TXC = IOMUX_PAD(0x04D4, 0x01C0, 3, 0x07C4, 0, 0), - MX6Q_PAD_DISP0_DAT20__SDMA_DBG_EVT_CHN7 = IOMUX_PAD(0x04D4, 0x01C0, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT20__GPIO_5_14 = IOMUX_PAD(0x04D4, 0x01C0, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT20__MMDC_DEBUG_25 = IOMUX_PAD(0x04D4, 0x01C0, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT20__PL301_PER1_HADR28 = IOMUX_PAD(0x04D4, 0x01C0, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT21__IPU2_DISP0_DAT_21 = IOMUX_PAD(0x04D8, 0x01C4, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT21__ECSPI1_MOSI = IOMUX_PAD(0x04D8, 0x01C4, 2, 0x07FC, 1, 0), - MX6Q_PAD_DISP0_DAT21__AUDMUX_AUD4_TXD = IOMUX_PAD(0x04D8, 0x01C4, 3, 0x07B8, 1, 0), - MX6Q_PAD_DISP0_DAT21__SDMA_DBG_BUS_DEV0 = IOMUX_PAD(0x04D8, 0x01C4, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT21__GPIO_5_15 = IOMUX_PAD(0x04D8, 0x01C4, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT21__MMDC_DEBUG_26 = IOMUX_PAD(0x04D8, 0x01C4, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT21__PL301_PER1_HADR29 = IOMUX_PAD(0x04D8, 0x01C4, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT22__IPU2_DISP0_DAT_22 = IOMUX_PAD(0x04DC, 0x01C8, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT22__ECSPI1_MISO = IOMUX_PAD(0x04DC, 0x01C8, 2, 0x07F8, 1, 0), - MX6Q_PAD_DISP0_DAT22__AUDMUX_AUD4_TXFS = IOMUX_PAD(0x04DC, 0x01C8, 3, 0x07C8, 1, 0), - MX6Q_PAD_DISP0_DAT22__SDMA_DBG_BUS_DEV1 = IOMUX_PAD(0x04DC, 0x01C8, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT22__GPIO_5_16 = IOMUX_PAD(0x04DC, 0x01C8, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT22__MMDC_DEBUG_27 = IOMUX_PAD(0x04DC, 0x01C8, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT22__PL301_PER1_HADR30 = IOMUX_PAD(0x04DC, 0x01C8, 7, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), - MX6Q_PAD_DISP0_DAT23__IPU2_DISP0_DAT_23 = IOMUX_PAD(0x04E0, 0x01CC, 1, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT23__ECSPI1_SS0 = IOMUX_PAD(0x04E0, 0x01CC, 2, 0x0800, 1, 0), - MX6Q_PAD_DISP0_DAT23__AUDMUX_AUD4_RXD = IOMUX_PAD(0x04E0, 0x01CC, 3, 0x07B4, 1, 0), - MX6Q_PAD_DISP0_DAT23__SDMA_DBG_BUS_DEV2 = IOMUX_PAD(0x04E0, 0x01CC, 4, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT23__GPIO_5_17 = IOMUX_PAD(0x04E0, 0x01CC, 5, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT23__MMDC_DEBUG_28 = IOMUX_PAD(0x04E0, 0x01CC, 6, 0x0000, 0, 0), - MX6Q_PAD_DISP0_DAT23__PL301_PER1_HADR31 = IOMUX_PAD(0x04E0, 0x01CC, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDIO__RESERVED_RESERVED = IOMUX_PAD(0x04E4, 0x01D0, 0, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x04E4, 0x01D0, 1, 0x0840, 0, 0), - MX6Q_PAD_ENET_MDIO__ESAI1_SCKR = IOMUX_PAD(0x04E4, 0x01D0, 2, 0x086C, 0, 0), - MX6Q_PAD_ENET_MDIO__SDMA_DEBUG_BUS_DEV3 = IOMUX_PAD(0x04E4, 0x01D0, 3, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDIO__ENET_1588_EVT1_OUT = IOMUX_PAD(0x04E4, 0x01D0, 4, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDIO__GPIO_1_22 = IOMUX_PAD(0x04E4, 0x01D0, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDIO__SPDIF_PLOCK = IOMUX_PAD(0x04E4, 0x01D0, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_REF_CLK__RESERVED_RSRVED = IOMUX_PAD(0x04E8, 0x01D4, 0, 0x0000, 0, 0), - MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x04E8, 0x01D4, 1, 0x0000, 0, 0), - MX6Q_PAD_ENET_REF_CLK__ESAI1_FSR = IOMUX_PAD(0x04E8, 0x01D4, 2, 0x085C, 0, 0), - MX6Q_PAD_ENET_REF_CLK__SDMA_DBGBUS_DEV4 = IOMUX_PAD(0x04E8, 0x01D4, 3, 0x0000, 0, 0), - MX6Q_PAD_ENET_REF_CLK__GPIO_1_23 = IOMUX_PAD(0x04E8, 0x01D4, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_REF_CLK__SPDIF_SRCLK = IOMUX_PAD(0x04E8, 0x01D4, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_REF_CLK__USBPHY1_RX_SQH = IOMUX_PAD(0x04E8, 0x01D4, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_RX_ER__ENET_RX_ER = IOMUX_PAD(0x04EC, 0x01D8, 1, 0x0000, 0, 0), - MX6Q_PAD_ENET_RX_ER__ESAI1_HCKR = IOMUX_PAD(0x04EC, 0x01D8, 2, 0x0864, 0, 0), - MX6Q_PAD_ENET_RX_ER__SPDIF_IN1 = IOMUX_PAD(0x04EC, 0x01D8, 3, 0x0914, 1, 0), - MX6Q_PAD_ENET_RX_ER__ENET_1588_EVT2_OUT = IOMUX_PAD(0x04EC, 0x01D8, 4, 0x0000, 0, 0), - MX6Q_PAD_ENET_RX_ER__GPIO_1_24 = IOMUX_PAD(0x04EC, 0x01D8, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_RX_ER__PHY_TDI = IOMUX_PAD(0x04EC, 0x01D8, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_RX_ER__USBPHY1_RX_HS_RXD = IOMUX_PAD(0x04EC, 0x01D8, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_CRS_DV__RESERVED_RSRVED = IOMUX_PAD(0x04F0, 0x01DC, 0, 0x0000, 0, 0), - MX6Q_PAD_ENET_CRS_DV__ENET_RX_EN = IOMUX_PAD(0x04F0, 0x01DC, 1, 0x0858, 1, 0), - MX6Q_PAD_ENET_CRS_DV__ESAI1_SCKT = IOMUX_PAD(0x04F0, 0x01DC, 2, 0x0870, 0, 0), - MX6Q_PAD_ENET_CRS_DV__SPDIF_EXTCLK = IOMUX_PAD(0x04F0, 0x01DC, 3, 0x0918, 1, 0), - MX6Q_PAD_ENET_CRS_DV__GPIO_1_25 = IOMUX_PAD(0x04F0, 0x01DC, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_CRS_DV__PHY_TDO = IOMUX_PAD(0x04F0, 0x01DC, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_CRS_DV__USBPHY1_RX_FS_RXD = IOMUX_PAD(0x04F0, 0x01DC, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD1__MLB_MLBSIG = IOMUX_PAD(0x04F4, 0x01E0, 0, 0x0908, 0, 0), - MX6Q_PAD_ENET_RXD1__ENET_RDATA_1 = IOMUX_PAD(0x04F4, 0x01E0, 1, 0x084C, 1, 0), - MX6Q_PAD_ENET_RXD1__ESAI1_FST = IOMUX_PAD(0x04F4, 0x01E0, 2, 0x0860, 0, 0), - MX6Q_PAD_ENET_RXD1__ENET_1588_EVT3_OUT = IOMUX_PAD(0x04F4, 0x01E0, 4, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD1__GPIO_1_26 = IOMUX_PAD(0x04F4, 0x01E0, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD1__PHY_TCK = IOMUX_PAD(0x04F4, 0x01E0, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD1__USBPHY1_RX_DISCON = IOMUX_PAD(0x04F4, 0x01E0, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD0__OSC32K_32K_OUT = IOMUX_PAD(0x04F8, 0x01E4, 0, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD0__ENET_RDATA_0 = IOMUX_PAD(0x04F8, 0x01E4, 1, 0x0848, 1, 0), - MX6Q_PAD_ENET_RXD0__ESAI1_HCKT = IOMUX_PAD(0x04F8, 0x01E4, 2, 0x0868, 0, 0), - MX6Q_PAD_ENET_RXD0__SPDIF_OUT1 = IOMUX_PAD(0x04F8, 0x01E4, 3, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x04F8, 0x01E4, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD0__PHY_TMS = IOMUX_PAD(0x04F8, 0x01E4, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_RXD0__USBPHY1_PLL_CK20DIV = IOMUX_PAD(0x04F8, 0x01E4, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_TX_EN__RESERVED_RSRVED = IOMUX_PAD(0x04FC, 0x01E8, 0, 0x0000, 0, 0), - MX6Q_PAD_ENET_TX_EN__ENET_TX_EN = IOMUX_PAD(0x04FC, 0x01E8, 1, 0x0000, 0, 0), - MX6Q_PAD_ENET_TX_EN__ESAI1_TX3_RX2 = IOMUX_PAD(0x04FC, 0x01E8, 2, 0x0880, 0, 0), - MX6Q_PAD_ENET_TX_EN__GPIO_1_28 = IOMUX_PAD(0x04FC, 0x01E8, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_TX_EN__SATA_PHY_TDI = IOMUX_PAD(0x04FC, 0x01E8, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_TX_EN__USBPHY2_RX_SQH = IOMUX_PAD(0x04FC, 0x01E8, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD1__MLB_MLBCLK = IOMUX_PAD(0x0500, 0x01EC, 0, 0x0900, 0, 0), - MX6Q_PAD_ENET_TXD1__ENET_TDATA_1 = IOMUX_PAD(0x0500, 0x01EC, 1, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD1__ESAI1_TX2_RX3 = IOMUX_PAD(0x0500, 0x01EC, 2, 0x087C, 0, 0), - MX6Q_PAD_ENET_TXD1__ENET_1588_EVENT0_IN = IOMUX_PAD(0x0500, 0x01EC, 4, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD1__GPIO_1_29 = IOMUX_PAD(0x0500, 0x01EC, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD1__SATA_PHY_TDO = IOMUX_PAD(0x0500, 0x01EC, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD1__USBPHY2_RX_HS_RXD = IOMUX_PAD(0x0500, 0x01EC, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD0__RESERVED_RSRVED = IOMUX_PAD(0x0504, 0x01F0, 0, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD0__ENET_TDATA_0 = IOMUX_PAD(0x0504, 0x01F0, 1, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD0__ESAI1_TX4_RX1 = IOMUX_PAD(0x0504, 0x01F0, 2, 0x0884, 0, 0), - MX6Q_PAD_ENET_TXD0__GPIO_1_30 = IOMUX_PAD(0x0504, 0x01F0, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD0__SATA_PHY_TCK = IOMUX_PAD(0x0504, 0x01F0, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_TXD0__USBPHY2_RX_FS_RXD = IOMUX_PAD(0x0504, 0x01F0, 7, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDC__MLB_MLBDAT = IOMUX_PAD(0x0508, 0x01F4, 0, 0x0904, 0, 0), - MX6Q_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x0508, 0x01F4, 1, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDC__ESAI1_TX5_RX0 = IOMUX_PAD(0x0508, 0x01F4, 2, 0x0888, 0, 0), - MX6Q_PAD_ENET_MDC__ENET_1588_EVENT1_IN = IOMUX_PAD(0x0508, 0x01F4, 4, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDC__GPIO_1_31 = IOMUX_PAD(0x0508, 0x01F4, 5, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDC__SATA_PHY_TMS = IOMUX_PAD(0x0508, 0x01F4, 6, 0x0000, 0, 0), - MX6Q_PAD_ENET_MDC__USBPHY2_RX_DISCON = IOMUX_PAD(0x0508, 0x01F4, 7, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D40__MMDC_DRAM_D_40 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D41__MMDC_DRAM_D_41 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D42__MMDC_DRAM_D_42 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D43__MMDC_DRAM_D_43 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D44__MMDC_DRAM_D_44 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D45__MMDC_DRAM_D_45 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D46__MMDC_DRAM_D_46 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D47__MMDC_DRAM_D_47 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS5__MMDC_DRAM_SDQS_5 = IOMUX_PAD(0x050C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM5__MMDC_DRAM_DQM_5 = IOMUX_PAD(0x0510, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D32__MMDC_DRAM_D_32 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D33__MMDC_DRAM_D_33 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D34__MMDC_DRAM_D_34 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D35__MMDC_DRAM_D_35 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D36__MMDC_DRAM_D_36 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D37__MMDC_DRAM_D_37 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D38__MMDC_DRAM_D_38 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D39__MMDC_DRAM_D_39 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM4__MMDC_DRAM_DQM_4 = IOMUX_PAD(0x0514, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS4__MMDC_DRAM_SDQS_4 = IOMUX_PAD(0x0518, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D24__MMDC_DRAM_D_24 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D25__MMDC_DRAM_D_25 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D26__MMDC_DRAM_D_26 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D27__MMDC_DRAM_D_27 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D28__MMDC_DRAM_D_28 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D29__MMDC_DRAM_D_29 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS3__MMDC_DRAM_SDQS_3 = IOMUX_PAD(0x051C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D30__MMDC_DRAM_D_30 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D31__MMDC_DRAM_D_31 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM3__MMDC_DRAM_DQM_3 = IOMUX_PAD(0x0520, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D16__MMDC_DRAM_D_16 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D17__MMDC_DRAM_D_17 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D18__MMDC_DRAM_D_18 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D19__MMDC_DRAM_D_19 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D20__MMDC_DRAM_D_20 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D21__MMDC_DRAM_D_21 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D22__MMDC_DRAM_D_22 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS2__MMDC_DRAM_SDQS_2 = IOMUX_PAD(0x0524, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D23__MMDC_DRAM_D_23 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM2__MMDC_DRAM_DQM_2 = IOMUX_PAD(0x0528, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A0__MMDC_DRAM_A_0 = IOMUX_PAD(0x052C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A1__MMDC_DRAM_A_1 = IOMUX_PAD(0x0530, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A2__MMDC_DRAM_A_2 = IOMUX_PAD(0x0534, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A3__MMDC_DRAM_A_3 = IOMUX_PAD(0x0538, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A4__MMDC_DRAM_A_4 = IOMUX_PAD(0x053C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A5__MMDC_DRAM_A_5 = IOMUX_PAD(0x0540, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A6__MMDC_DRAM_A_6 = IOMUX_PAD(0x0544, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A7__MMDC_DRAM_A_7 = IOMUX_PAD(0x0548, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A8__MMDC_DRAM_A_8 = IOMUX_PAD(0x054C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A9__MMDC_DRAM_A_9 = IOMUX_PAD(0x0550, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A10__MMDC_DRAM_A_10 = IOMUX_PAD(0x0554, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A11__MMDC_DRAM_A_11 = IOMUX_PAD(0x0558, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A12__MMDC_DRAM_A_12 = IOMUX_PAD(0x055C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A13__MMDC_DRAM_A_13 = IOMUX_PAD(0x0560, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A14__MMDC_DRAM_A_14 = IOMUX_PAD(0x0564, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_A15__MMDC_DRAM_A_15 = IOMUX_PAD(0x0568, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_CAS__MMDC_DRAM_CAS = IOMUX_PAD(0x056C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_CS0__MMDC_DRAM_CS_0 = IOMUX_PAD(0x0570, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_CS1__MMDC_DRAM_CS_1 = IOMUX_PAD(0x0574, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_RAS__MMDC_DRAM_RAS = IOMUX_PAD(0x0578, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_RESET__MMDC_DRAM_RESET = IOMUX_PAD(0x057C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDBA0__MMDC_DRAM_SDBA_0 = IOMUX_PAD(0x0580, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDBA1__MMDC_DRAM_SDBA_1 = IOMUX_PAD(0x0584, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDCLK_0__MMDC_DRAM_SDCLK0 = IOMUX_PAD(0x0588, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDBA2__MMDC_DRAM_SDBA_2 = IOMUX_PAD(0x058C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDCKE0__MMDC_DRAM_SDCKE_0 = IOMUX_PAD(0x0590, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDCLK_1__MMDC_DRAM_SDCLK1 = IOMUX_PAD(0x0594, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDCKE1__MMDC_DRAM_SDCKE_1 = IOMUX_PAD(0x0598, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDODT0__MMDC_DRAM_ODT_0 = IOMUX_PAD(0x059C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDODT1__MMDC_DRAM_ODT_1 = IOMUX_PAD(0x05A0, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDWE__MMDC_DRAM_SDWE = IOMUX_PAD(0x05A4, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D0__MMDC_DRAM_D_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D1__MMDC_DRAM_D_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D2__MMDC_DRAM_D_2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D3__MMDC_DRAM_D_3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D4__MMDC_DRAM_D_4 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D5__MMDC_DRAM_D_5 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS0__MMDC_DRAM_SDQS_0 = IOMUX_PAD(0x05A8, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D6__MMDC_DRAM_D_6 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D7__MMDC_DRAM_D_7 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM0__MMDC_DRAM_DQM_0 = IOMUX_PAD(0x05AC, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D8__MMDC_DRAM_D_8 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D9__MMDC_DRAM_D_9 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D10__MMDC_DRAM_D_10 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D11__MMDC_DRAM_D_11 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D12__MMDC_DRAM_D_12 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D13__MMDC_DRAM_D_13 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D14__MMDC_DRAM_D_14 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS1__MMDC_DRAM_SDQS_1 = IOMUX_PAD(0x05B0, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D15__MMDC_DRAM_D_15 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM1__MMDC_DRAM_DQM_1 = IOMUX_PAD(0x05B4, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D48__MMDC_DRAM_D_48 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D49__MMDC_DRAM_D_49 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D50__MMDC_DRAM_D_50 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D51__MMDC_DRAM_D_51 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D52__MMDC_DRAM_D_52 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D53__MMDC_DRAM_D_53 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D54__MMDC_DRAM_D_54 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D55__MMDC_DRAM_D_55 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS6__MMDC_DRAM_SDQS_6 = IOMUX_PAD(0x05B8, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM6__MMDC_DRAM_DQM_6 = IOMUX_PAD(0x05BC, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D56__MMDC_DRAM_D_56 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_SDQS7__MMDC_DRAM_SDQS_7 = IOMUX_PAD(0x05C0, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D57__MMDC_DRAM_D_57 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D58__MMDC_DRAM_D_58 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D59__MMDC_DRAM_D_59 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D60__MMDC_DRAM_D_60 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_DQM7__MMDC_DRAM_DQM_7 = IOMUX_PAD(0x05C4, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D61__MMDC_DRAM_D_61 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D62__MMDC_DRAM_D_62 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_DRAM_D63__MMDC_DRAM_D_63 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL0__ECSPI1_SCLK = IOMUX_PAD(0x05C8, 0x01F8, 0, 0x07F4, 2, 0), - MX6Q_PAD_KEY_COL0__ENET_RDATA_3 = IOMUX_PAD(0x05C8, 0x01F8, 1, 0x0854, 1, 0), - MX6Q_PAD_KEY_COL0__AUDMUX_AUD5_TXC = IOMUX_PAD(0x05C8, 0x01F8, 2, 0x07DC, 1, 0), - MX6Q_PAD_KEY_COL0__KPP_COL_0 = IOMUX_PAD(0x05C8, 0x01F8, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL0__UART4_TXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL0__UART4_TXD_RXD = IOMUX_PAD(0x05C8, 0x01F8, 4, 0x0938, 0, 0), - MX6Q_PAD_KEY_COL0__GPIO_4_6 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL0__DCIC1_DCIC_OUT = IOMUX_PAD(0x05C8, 0x01F8, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL0__SRC_ANY_PU_RST = IOMUX_PAD(0x05C8, 0x01F8, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW0__ECSPI1_MOSI = IOMUX_PAD(0x05CC, 0x01FC, 0, 0x07FC, 2, 0), - MX6Q_PAD_KEY_ROW0__ENET_TDATA_3 = IOMUX_PAD(0x05CC, 0x01FC, 1, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW0__AUDMUX_AUD5_TXD = IOMUX_PAD(0x05CC, 0x01FC, 2, 0x07D0, 1, 0), - MX6Q_PAD_KEY_ROW0__KPP_ROW_0 = IOMUX_PAD(0x05CC, 0x01FC, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW0__UART4_RXD = IOMUX_PAD(0x05CC, 0x01FC, 4, 0x0938, 1, 0), - MX6Q_PAD_KEY_ROW0__GPIO_4_7 = IOMUX_PAD(0x05CC, 0x01FC, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW0__DCIC2_DCIC_OUT = IOMUX_PAD(0x05CC, 0x01FC, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW0__PL301_PER1_HADR_0 = IOMUX_PAD(0x05CC, 0x01FC, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL1__ECSPI1_MISO = IOMUX_PAD(0x05D0, 0x0200, 0, 0x07F8, 2, 0), - MX6Q_PAD_KEY_COL1__ENET_MDIO = IOMUX_PAD(0x05D0, 0x0200, 1, 0x0840, 1, 0), - MX6Q_PAD_KEY_COL1__AUDMUX_AUD5_TXFS = IOMUX_PAD(0x05D0, 0x0200, 2, 0x07E0, 1, 0), - MX6Q_PAD_KEY_COL1__KPP_COL_1 = IOMUX_PAD(0x05D0, 0x0200, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL1__UART5_TXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL1__UART5_TXD_RXD = IOMUX_PAD(0x05D0, 0x0200, 4, 0x0940, 0, 0), - MX6Q_PAD_KEY_COL1__GPIO_4_8 = IOMUX_PAD(0x05D0, 0x0200, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL1__USDHC1_VSELECT = IOMUX_PAD(0x05D0, 0x0200, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL1__PL301MX_PER1_HADR_1 = IOMUX_PAD(0x05D0, 0x0200, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW1__ECSPI1_SS0 = IOMUX_PAD(0x05D4, 0x0204, 0, 0x0800, 2, 0), - MX6Q_PAD_KEY_ROW1__ENET_COL = IOMUX_PAD(0x05D4, 0x0204, 1, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW1__AUDMUX_AUD5_RXD = IOMUX_PAD(0x05D4, 0x0204, 2, 0x07CC, 1, 0), - MX6Q_PAD_KEY_ROW1__KPP_ROW_1 = IOMUX_PAD(0x05D4, 0x0204, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW1__UART5_RXD = IOMUX_PAD(0x05D4, 0x0204, 4, 0x0940, 1, 0), - MX6Q_PAD_KEY_ROW1__GPIO_4_9 = IOMUX_PAD(0x05D4, 0x0204, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW1__USDHC2_VSELECT = IOMUX_PAD(0x05D4, 0x0204, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW1__PL301_PER1_HADDR_2 = IOMUX_PAD(0x05D4, 0x0204, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL2__ECSPI1_SS1 = IOMUX_PAD(0x05D8, 0x0208, 0, 0x0804, 2, 0), - MX6Q_PAD_KEY_COL2__ENET_RDATA_2 = IOMUX_PAD(0x05D8, 0x0208, 1, 0x0850, 1, 0), - MX6Q_PAD_KEY_COL2__CAN1_TXCAN = IOMUX_PAD(0x05D8, 0x0208, 2, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL2__KPP_COL_2 = IOMUX_PAD(0x05D8, 0x0208, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL2__ENET_MDC = IOMUX_PAD(0x05D8, 0x0208, 4, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL2__GPIO_4_10 = IOMUX_PAD(0x05D8, 0x0208, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL2__USBOH3_H1_PWRCTL_WKP = IOMUX_PAD(0x05D8, 0x0208, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL2__PL301_PER1_HADDR_3 = IOMUX_PAD(0x05D8, 0x0208, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW2__ECSPI1_SS2 = IOMUX_PAD(0x05DC, 0x020C, 0, 0x0808, 1, 0), - MX6Q_PAD_KEY_ROW2__ENET_TDATA_2 = IOMUX_PAD(0x05DC, 0x020C, 1, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW2__CAN1_RXCAN = IOMUX_PAD(0x05DC, 0x020C, 2, 0x07E4, 0, 0), - MX6Q_PAD_KEY_ROW2__KPP_ROW_2 = IOMUX_PAD(0x05DC, 0x020C, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW2__USDHC2_VSELECT = IOMUX_PAD(0x05DC, 0x020C, 4, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW2__GPIO_4_11 = IOMUX_PAD(0x05DC, 0x020C, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW2__HDMI_TX_CEC_LINE = IOMUX_PAD(0x05DC, 0x020C, 6, 0x088C, 1, 0), - MX6Q_PAD_KEY_ROW2__PL301_PER1_HADR_4 = IOMUX_PAD(0x05DC, 0x020C, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL3__ECSPI1_SS3 = IOMUX_PAD(0x05E0, 0x0210, 0, 0x080C, 1, 0), - MX6Q_PAD_KEY_COL3__ENET_CRS = IOMUX_PAD(0x05E0, 0x0210, 1, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL3__HDMI_TX_DDC_SCL = IOMUX_PAD(0x05E0, 0x0210, 2, 0x0890, 1, 0), - MX6Q_PAD_KEY_COL3__KPP_COL_3 = IOMUX_PAD(0x05E0, 0x0210, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x05E0, 0x0210, 20, 0x08A0, 1, 0), - MX6Q_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x05E0, 0x0210, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL3__SPDIF_IN1 = IOMUX_PAD(0x05E0, 0x0210, 6, 0x0914, 2, 0), - MX6Q_PAD_KEY_COL3__PL301_PER1_HADR_5 = IOMUX_PAD(0x05E0, 0x0210, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW3__OSC32K_32K_OUT = IOMUX_PAD(0x05E4, 0x0214, 0, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW3__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05E4, 0x0214, 1, 0x07B0, 0, 0), - MX6Q_PAD_KEY_ROW3__HDMI_TX_DDC_SDA = IOMUX_PAD(0x05E4, 0x0214, 2, 0x0894, 1, 0), - MX6Q_PAD_KEY_ROW3__KPP_ROW_3 = IOMUX_PAD(0x05E4, 0x0214, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x05E4, 0x0214, 20, 0x08A4, 1, 0), - MX6Q_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW3__USDHC1_VSELECT = IOMUX_PAD(0x05E4, 0x0214, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW3__PL301_PER1_HADR_6 = IOMUX_PAD(0x05E4, 0x0214, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL4__CAN2_TXCAN = IOMUX_PAD(0x05E8, 0x0218, 0, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL4__IPU1_SISG_4 = IOMUX_PAD(0x05E8, 0x0218, 1, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL4__USBOH3_USBOTG_OC = IOMUX_PAD(0x05E8, 0x0218, 2, 0x0944, 1, 0), - MX6Q_PAD_KEY_COL4__KPP_COL_4 = IOMUX_PAD(0x05E8, 0x0218, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL4__UART5_CTS = IOMUX_PAD(0x05E8, 0x0218, 4, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL4__UART5_RTS = IOMUX_PAD(0x05E8, 0x0218, 4, 0x093C, 0, 0), - MX6Q_PAD_KEY_COL4__GPIO_4_14 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL4__MMDC_DEBUG_49 = IOMUX_PAD(0x05E8, 0x0218, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_COL4__PL301_PER1_HADDR_7 = IOMUX_PAD(0x05E8, 0x0218, 7, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW4__CAN2_RXCAN = IOMUX_PAD(0x05EC, 0x021C, 0, 0x07E8, 0, 0), - MX6Q_PAD_KEY_ROW4__IPU1_SISG_5 = IOMUX_PAD(0x05EC, 0x021C, 1, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW4__USBOH3_USBOTG_PWR = IOMUX_PAD(0x05EC, 0x021C, 2, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW4__KPP_ROW_4 = IOMUX_PAD(0x05EC, 0x021C, 3, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW4__UART5_CTS = IOMUX_PAD(0x05EC, 0x021C, 4, 0x093C, 1, 0), - MX6Q_PAD_KEY_ROW4__GPIO_4_15 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW4__MMDC_DEBUG_50 = IOMUX_PAD(0x05EC, 0x021C, 6, 0x0000, 0, 0), - MX6Q_PAD_KEY_ROW4__PL301_PER1_HADR_8 = IOMUX_PAD(0x05EC, 0x021C, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_0__CCM_CLKO = IOMUX_PAD(0x05F0, 0x0220, 0, 0x0000, 0, 0), - MX6Q_PAD_GPIO_0__KPP_COL_5 = IOMUX_PAD(0x05F0, 0x0220, 2, 0x08E8, 0, 0), - MX6Q_PAD_GPIO_0__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x05F0, 0x0220, 3, 0x07B0, 1, 0), - MX6Q_PAD_GPIO_0__EPIT1_EPITO = IOMUX_PAD(0x05F0, 0x0220, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_0__GPIO_1_0 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_0__USBOH3_USBH1_PWR = IOMUX_PAD(0x05F0, 0x0220, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_0__SNVS_HP_WRAP_SNVS_VIO5 = IOMUX_PAD(0x05F0, 0x0220, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_1__ESAI1_SCKR = IOMUX_PAD(0x05F4, 0x0224, 0, 0x086C, 1, 0), - MX6Q_PAD_GPIO_1__WDOG2_WDOG_B = IOMUX_PAD(0x05F4, 0x0224, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_1__KPP_ROW_5 = IOMUX_PAD(0x05F4, 0x0224, 2, 0x08F4, 0, 0), - MX6Q_PAD_GPIO_1__PWM2_PWMO = IOMUX_PAD(0x05F4, 0x0224, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_1__GPIO_1_1 = IOMUX_PAD(0x05F4, 0x0224, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_1__USDHC1_CD = IOMUX_PAD(0x05F4, 0x0224, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_1__SRC_TESTER_ACK = IOMUX_PAD(0x05F4, 0x0224, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_9__ESAI1_FSR = IOMUX_PAD(0x05F8, 0x0228, 0, 0x085C, 1, 0), - MX6Q_PAD_GPIO_9__WDOG1_WDOG_B = IOMUX_PAD(0x05F8, 0x0228, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_9__KPP_COL_6 = IOMUX_PAD(0x05F8, 0x0228, 2, 0x08EC, 0, 0), - MX6Q_PAD_GPIO_9__CCM_REF_EN_B = IOMUX_PAD(0x05F8, 0x0228, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_9__PWM1_PWMO = IOMUX_PAD(0x05F8, 0x0228, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_9__GPIO_1_9 = IOMUX_PAD(0x05F8, 0x0228, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_9__USDHC1_WP = IOMUX_PAD(0x05F8, 0x0228, 6, 0x094C, 1, 0), - MX6Q_PAD_GPIO_9__SRC_EARLY_RST = IOMUX_PAD(0x05F8, 0x0228, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_3__ESAI1_HCKR = IOMUX_PAD(0x05FC, 0x022C, 0, 0x0864, 1, 0), - MX6Q_PAD_GPIO_3__OBSERVE_MUX_INT_OUT0 = IOMUX_PAD(0x05FC, 0x022C, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_3__I2C3_SCL = IOMUX_PAD(0x05FC, 0x022C, 18, 0x08A8, 1, 0), - MX6Q_PAD_GPIO_3__ANATOP_24M_OUT = IOMUX_PAD(0x05FC, 0x022C, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_3__CCM_CLKO2 = IOMUX_PAD(0x05FC, 0x022C, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_3__GPIO_1_3 = IOMUX_PAD(0x05FC, 0x022C, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_3__USBOH3_USBH1_OC = IOMUX_PAD(0x05FC, 0x022C, 6, 0x0948, 1, 0), - MX6Q_PAD_GPIO_3__MLB_MLBCLK = IOMUX_PAD(0x05FC, 0x022C, 7, 0x0900, 1, 0), - MX6Q_PAD_GPIO_6__ESAI1_SCKT = IOMUX_PAD(0x0600, 0x0230, 0, 0x0870, 1, 0), - MX6Q_PAD_GPIO_6__OBSERVE_MUX_INT_OUT1 = IOMUX_PAD(0x0600, 0x0230, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_6__I2C3_SDA = IOMUX_PAD(0x0600, 0x0230, 18, 0x08AC, 1, 0), - MX6Q_PAD_GPIO_6__CCM_CCM_OUT_0 = IOMUX_PAD(0x0600, 0x0230, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_6__CSU_CSU_INT_DEB = IOMUX_PAD(0x0600, 0x0230, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_6__GPIO_1_6 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_6__USDHC2_LCTL = IOMUX_PAD(0x0600, 0x0230, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_6__MLB_MLBSIG = IOMUX_PAD(0x0600, 0x0230, 7, 0x0908, 1, 0), - MX6Q_PAD_GPIO_2__ESAI1_FST = IOMUX_PAD(0x0604, 0x0234, 0, 0x0860, 1, 0), - MX6Q_PAD_GPIO_2__OBSERVE_MUX_INT_OUT2 = IOMUX_PAD(0x0604, 0x0234, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_2__KPP_ROW_6 = IOMUX_PAD(0x0604, 0x0234, 2, 0x08F8, 1, 0), - MX6Q_PAD_GPIO_2__CCM_CCM_OUT_1 = IOMUX_PAD(0x0604, 0x0234, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_2__CSU_CSU_ALARM_AUT_0 = IOMUX_PAD(0x0604, 0x0234, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_2__GPIO_1_2 = IOMUX_PAD(0x0604, 0x0234, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_2__USDHC2_WP = IOMUX_PAD(0x0604, 0x0234, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_2__MLB_MLBDAT = IOMUX_PAD(0x0604, 0x0234, 7, 0x0904, 1, 0), - MX6Q_PAD_GPIO_4__ESAI1_HCKT = IOMUX_PAD(0x0608, 0x0238, 0, 0x0868, 1, 0), - MX6Q_PAD_GPIO_4__OBSERVE_MUX_INT_OUT3 = IOMUX_PAD(0x0608, 0x0238, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_4__KPP_COL_7 = IOMUX_PAD(0x0608, 0x0238, 2, 0x08F0, 1, 0), - MX6Q_PAD_GPIO_4__CCM_CCM_OUT_2 = IOMUX_PAD(0x0608, 0x0238, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_4__CSU_CSU_ALARM_AUT_1 = IOMUX_PAD(0x0608, 0x0238, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_4__GPIO_1_4 = IOMUX_PAD(0x0608, 0x0238, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_4__USDHC2_CD = IOMUX_PAD(0x0608, 0x0238, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_4__OCOTP_CRL_WRAR_FUSE_LA = IOMUX_PAD(0x0608, 0x0238, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_5__ESAI1_TX2_RX3 = IOMUX_PAD(0x060C, 0x023C, 0, 0x087C, 1, 0), - MX6Q_PAD_GPIO_5__OBSERVE_MUX_INT_OUT4 = IOMUX_PAD(0x060C, 0x023C, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_5__KPP_ROW_7 = IOMUX_PAD(0x060C, 0x023C, 2, 0x08FC, 1, 0), - MX6Q_PAD_GPIO_5__CCM_CLKO = IOMUX_PAD(0x060C, 0x023C, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 = IOMUX_PAD(0x060C, 0x023C, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x060C, 0x023C, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x060C, 0x023C, 22, 0x08A8, 2, 0), - MX6Q_PAD_GPIO_5__CHEETAH_EVENTI = IOMUX_PAD(0x060C, 0x023C, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__ESAI1_TX4_RX1 = IOMUX_PAD(0x0610, 0x0240, 0, 0x0884, 1, 0), - MX6Q_PAD_GPIO_7__ECSPI5_RDY = IOMUX_PAD(0x0610, 0x0240, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__EPIT1_EPITO = IOMUX_PAD(0x0610, 0x0240, 2, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__CAN1_TXCAN = IOMUX_PAD(0x0610, 0x0240, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__UART2_TXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__UART2_TXD_RXD = IOMUX_PAD(0x0610, 0x0240, 4, 0x0928, 2, 0), - MX6Q_PAD_GPIO_7__GPIO_1_7 = IOMUX_PAD(0x0610, 0x0240, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__SPDIF_PLOCK = IOMUX_PAD(0x0610, 0x0240, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_7__USBOH3_OTGUSB_HST_MODE = IOMUX_PAD(0x0610, 0x0240, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_8__ESAI1_TX5_RX0 = IOMUX_PAD(0x0614, 0x0244, 0, 0x0888, 1, 0), - MX6Q_PAD_GPIO_8__ANATOP_ANATOP_32K_OUT = IOMUX_PAD(0x0614, 0x0244, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_8__EPIT2_EPITO = IOMUX_PAD(0x0614, 0x0244, 2, 0x0000, 0, 0), - MX6Q_PAD_GPIO_8__CAN1_RXCAN = IOMUX_PAD(0x0614, 0x0244, 3, 0x07E4, 1, 0), - MX6Q_PAD_GPIO_8__UART2_RXD = IOMUX_PAD(0x0614, 0x0244, 4, 0x0928, 3, 0), - MX6Q_PAD_GPIO_8__GPIO_1_8 = IOMUX_PAD(0x0614, 0x0244, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_8__SPDIF_SRCLK = IOMUX_PAD(0x0614, 0x0244, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_8__USBOH3_OTG_PWRCTL_WAK = IOMUX_PAD(0x0614, 0x0244, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_16__ESAI1_TX3_RX2 = IOMUX_PAD(0x0618, 0x0248, 0, 0x0880, 1, 0), - MX6Q_PAD_GPIO_16__ENET_1588_EVENT2_IN = IOMUX_PAD(0x0618, 0x0248, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_16__ENET_ETHERNET_REF_OUT = IOMUX_PAD(0x0618, 0x0248, 2, 0x083C, 1, 0), - MX6Q_PAD_GPIO_16__USDHC1_LCTL = IOMUX_PAD(0x0618, 0x0248, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_16__SPDIF_IN1 = IOMUX_PAD(0x0618, 0x0248, 4, 0x0914, 3, 0), - MX6Q_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x0618, 0x0248, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x0618, 0x0248, 22, 0x08AC, 2, 0), - MX6Q_PAD_GPIO_16__SJC_DE_B = IOMUX_PAD(0x0618, 0x0248, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_17__ESAI1_TX0 = IOMUX_PAD(0x061C, 0x024C, 0, 0x0874, 0, 0), - MX6Q_PAD_GPIO_17__ENET_1588_EVENT3_IN = IOMUX_PAD(0x061C, 0x024C, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_17__CCM_PMIC_RDY = IOMUX_PAD(0x061C, 0x024C, 2, 0x07F0, 1, 0), - MX6Q_PAD_GPIO_17__SDMA_SDMA_EXT_EVENT_0 = IOMUX_PAD(0x061C, 0x024C, 3, 0x090C, 1, 0), - MX6Q_PAD_GPIO_17__SPDIF_OUT1 = IOMUX_PAD(0x061C, 0x024C, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x061C, 0x024C, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_17__SJC_JTAG_ACT = IOMUX_PAD(0x061C, 0x024C, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_18__ESAI1_TX1 = IOMUX_PAD(0x0620, 0x0250, 0, 0x0878, 0, 0), - MX6Q_PAD_GPIO_18__ENET_RX_CLK = IOMUX_PAD(0x0620, 0x0250, 1, 0x0844, 1, 0), - MX6Q_PAD_GPIO_18__USDHC3_VSELECT = IOMUX_PAD(0x0620, 0x0250, 2, 0x0000, 0, 0), - MX6Q_PAD_GPIO_18__SDMA_SDMA_EXT_EVENT_1 = IOMUX_PAD(0x0620, 0x0250, 3, 0x0910, 1, 0), - MX6Q_PAD_GPIO_18__ASRC_ASRC_EXT_CLK = IOMUX_PAD(0x0620, 0x0250, 4, 0x07B0, 2, 0), - MX6Q_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x0620, 0x0250, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_18__SNVS_HP_WRA_SNVS_VIO5 = IOMUX_PAD(0x0620, 0x0250, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_18__SRC_SYSTEM_RST = IOMUX_PAD(0x0620, 0x0250, 7, 0x0000, 0, 0), - MX6Q_PAD_GPIO_19__KPP_COL_5 = IOMUX_PAD(0x0624, 0x0254, 0, 0x08E8, 1, 0), - MX6Q_PAD_GPIO_19__ENET_1588_EVENT0_OUT = IOMUX_PAD(0x0624, 0x0254, 1, 0x0000, 0, 0), - MX6Q_PAD_GPIO_19__SPDIF_OUT1 = IOMUX_PAD(0x0624, 0x0254, 2, 0x0000, 0, 0), - MX6Q_PAD_GPIO_19__CCM_CLKO = IOMUX_PAD(0x0624, 0x0254, 3, 0x0000, 0, 0), - MX6Q_PAD_GPIO_19__ECSPI1_RDY = IOMUX_PAD(0x0624, 0x0254, 4, 0x0000, 0, 0), - MX6Q_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x0624, 0x0254, 5, 0x0000, 0, 0), - MX6Q_PAD_GPIO_19__ENET_TX_ER = IOMUX_PAD(0x0624, 0x0254, 6, 0x0000, 0, 0), - MX6Q_PAD_GPIO_19__SRC_INT_BOOT = IOMUX_PAD(0x0624, 0x0254, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK = IOMUX_PAD(0x0628, 0x0258, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_PIXCLK__PCIE_CTRL_MUX_12 = IOMUX_PAD(0x0628, 0x0258, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_PIXCLK__SDMA_DEBUG_PC_0 = IOMUX_PAD(0x0628, 0x0258, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_PIXCLK__GPIO_5_18 = IOMUX_PAD(0x0628, 0x0258, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_PIXCLK___MMDC_DEBUG_29 = IOMUX_PAD(0x0628, 0x0258, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_PIXCLK__CHEETAH_EVENTO = IOMUX_PAD(0x0628, 0x0258, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC = IOMUX_PAD(0x062C, 0x025C, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_MCLK__PCIE_CTRL_MUX_13 = IOMUX_PAD(0x062C, 0x025C, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_MCLK__CCM_CLKO = IOMUX_PAD(0x062C, 0x025C, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_MCLK__SDMA_DEBUG_PC_1 = IOMUX_PAD(0x062C, 0x025C, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_MCLK__GPIO_5_19 = IOMUX_PAD(0x062C, 0x025C, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_MCLK__MMDC_MMDC_DEBUG_30 = IOMUX_PAD(0x062C, 0x025C, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_MCLK__CHEETAH_TRCTL = IOMUX_PAD(0x062C, 0x025C, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DATA_EN__IPU1_CSI0_DA_EN = IOMUX_PAD(0x0630, 0x0260, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DATA_EN__WEIM_WEIM_D_0 = IOMUX_PAD(0x0630, 0x0260, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DATA_EN__PCIE_CTRL_MUX_14 = IOMUX_PAD(0x0630, 0x0260, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DATA_EN__SDMA_DEBUG_PC_2 = IOMUX_PAD(0x0630, 0x0260, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DATA_EN__GPIO_5_20 = IOMUX_PAD(0x0630, 0x0260, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DATA_EN__MMDC_DEBUG_31 = IOMUX_PAD(0x0630, 0x0260, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DATA_EN__CHEETAH_TRCLK = IOMUX_PAD(0x0630, 0x0260, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC = IOMUX_PAD(0x0634, 0x0264, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_VSYNC__WEIM_WEIM_D_1 = IOMUX_PAD(0x0634, 0x0264, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_VSYNC__PCIE_CTRL_MUX_15 = IOMUX_PAD(0x0634, 0x0264, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_VSYNC__SDMA_DEBUG_PC_3 = IOMUX_PAD(0x0634, 0x0264, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_VSYNC__GPIO_5_21 = IOMUX_PAD(0x0634, 0x0264, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_VSYNC__MMDC_DEBUG_32 = IOMUX_PAD(0x0634, 0x0264, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_VSYNC__CHEETAH_TRACE_0 = IOMUX_PAD(0x0634, 0x0264, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT4__IPU1_CSI0_D_4 = IOMUX_PAD(0x0638, 0x0268, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT4__WEIM_WEIM_D_2 = IOMUX_PAD(0x0638, 0x0268, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT4__ECSPI1_SCLK = IOMUX_PAD(0x0638, 0x0268, 2, 0x07F4, 3, 0), - MX6Q_PAD_CSI0_DAT4__KPP_COL_5 = IOMUX_PAD(0x0638, 0x0268, 3, 0x08E8, 2, 0), - MX6Q_PAD_CSI0_DAT4__AUDMUX_AUD3_TXC = IOMUX_PAD(0x0638, 0x0268, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT4__GPIO_5_22 = IOMUX_PAD(0x0638, 0x0268, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT4__MMDC_DEBUG_43 = IOMUX_PAD(0x0638, 0x0268, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT4__CHEETAH_TRACE_1 = IOMUX_PAD(0x0638, 0x0268, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT5__IPU1_CSI0_D_5 = IOMUX_PAD(0x063C, 0x026C, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT5__WEIM_WEIM_D_3 = IOMUX_PAD(0x063C, 0x026C, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT5__ECSPI1_MOSI = IOMUX_PAD(0x063C, 0x026C, 2, 0x07FC, 3, 0), - MX6Q_PAD_CSI0_DAT5__KPP_ROW_5 = IOMUX_PAD(0x063C, 0x026C, 3, 0x08F4, 1, 0), - MX6Q_PAD_CSI0_DAT5__AUDMUX_AUD3_TXD = IOMUX_PAD(0x063C, 0x026C, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT5__GPIO_5_23 = IOMUX_PAD(0x063C, 0x026C, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT5__MMDC_MMDC_DEBUG_44 = IOMUX_PAD(0x063C, 0x026C, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT5__CHEETAH_TRACE_2 = IOMUX_PAD(0x063C, 0x026C, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT6__IPU1_CSI0_D_6 = IOMUX_PAD(0x0640, 0x0270, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT6__WEIM_WEIM_D_4 = IOMUX_PAD(0x0640, 0x0270, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT6__ECSPI1_MISO = IOMUX_PAD(0x0640, 0x0270, 2, 0x07F8, 3, 0), - MX6Q_PAD_CSI0_DAT6__KPP_COL_6 = IOMUX_PAD(0x0640, 0x0270, 3, 0x08EC, 1, 0), - MX6Q_PAD_CSI0_DAT6__AUDMUX_AUD3_TXFS = IOMUX_PAD(0x0640, 0x0270, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT6__GPIO_5_24 = IOMUX_PAD(0x0640, 0x0270, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT6__MMDC_MMDC_DEBUG_45 = IOMUX_PAD(0x0640, 0x0270, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT6__CHEETAH_TRACE_3 = IOMUX_PAD(0x0640, 0x0270, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT7__IPU1_CSI0_D_7 = IOMUX_PAD(0x0644, 0x0274, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT7__WEIM_WEIM_D_5 = IOMUX_PAD(0x0644, 0x0274, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT7__ECSPI1_SS0 = IOMUX_PAD(0x0644, 0x0274, 2, 0x0800, 3, 0), - MX6Q_PAD_CSI0_DAT7__KPP_ROW_6 = IOMUX_PAD(0x0644, 0x0274, 3, 0x08F8, 2, 0), - MX6Q_PAD_CSI0_DAT7__AUDMUX_AUD3_RXD = IOMUX_PAD(0x0644, 0x0274, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT7__GPIO_5_25 = IOMUX_PAD(0x0644, 0x0274, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT7__MMDC_MMDC_DEBUG_46 = IOMUX_PAD(0x0644, 0x0274, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT7__CHEETAH_TRACE_4 = IOMUX_PAD(0x0644, 0x0274, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT8__IPU1_CSI0_D_8 = IOMUX_PAD(0x0648, 0x0278, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT8__WEIM_WEIM_D_6 = IOMUX_PAD(0x0648, 0x0278, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT8__ECSPI2_SCLK = IOMUX_PAD(0x0648, 0x0278, 2, 0x0810, 2, 0), - MX6Q_PAD_CSI0_DAT8__KPP_COL_7 = IOMUX_PAD(0x0648, 0x0278, 3, 0x08F0, 2, 0), - MX6Q_PAD_CSI0_DAT8__I2C1_SDA = IOMUX_PAD(0x0648, 0x0278, 20, 0x089C, 1, 0), - MX6Q_PAD_CSI0_DAT8__GPIO_5_26 = IOMUX_PAD(0x0648, 0x0278, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT8__MMDC_MMDC_DEBUG_47 = IOMUX_PAD(0x0648, 0x0278, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT8__CHEETAH_TRACE_5 = IOMUX_PAD(0x0648, 0x0278, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT9__IPU1_CSI0_D_9 = IOMUX_PAD(0x064C, 0x027C, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT9__WEIM_WEIM_D_7 = IOMUX_PAD(0x064C, 0x027C, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT9__ECSPI2_MOSI = IOMUX_PAD(0x064C, 0x027C, 2, 0x0818, 2, 0), - MX6Q_PAD_CSI0_DAT9__KPP_ROW_7 = IOMUX_PAD(0x064C, 0x027C, 3, 0x08FC, 2, 0), - MX6Q_PAD_CSI0_DAT9__I2C1_SCL = IOMUX_PAD(0x064C, 0x027C, 20, 0x0898, 1, 0), - MX6Q_PAD_CSI0_DAT9__GPIO_5_27 = IOMUX_PAD(0x064C, 0x027C, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT9__MMDC_MMDC_DEBUG_48 = IOMUX_PAD(0x064C, 0x027C, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT9__CHEETAH_TRACE_6 = IOMUX_PAD(0x064C, 0x027C, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__IPU1_CSI0_D_10 = IOMUX_PAD(0x0650, 0x0280, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC = IOMUX_PAD(0x0650, 0x0280, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__ECSPI2_MISO = IOMUX_PAD(0x0650, 0x0280, 2, 0x0814, 2, 0), - MX6Q_PAD_CSI0_DAT10__UART1_TXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__UART1_TXD_RXD = IOMUX_PAD(0x0650, 0x0280, 3, 0x0920, 0, 0), - MX6Q_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 = IOMUX_PAD(0x0650, 0x0280, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__GPIO_5_28 = IOMUX_PAD(0x0650, 0x0280, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__MMDC_MMDC_DEBUG_33 = IOMUX_PAD(0x0650, 0x0280, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT10__CHEETAH_TRACE_7 = IOMUX_PAD(0x0650, 0x0280, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT11__IPU1_CSI0_D_11 = IOMUX_PAD(0x0654, 0x0284, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT11__AUDMUX_AUD3_RXFS = IOMUX_PAD(0x0654, 0x0284, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT11__ECSPI2_SS0 = IOMUX_PAD(0x0654, 0x0284, 2, 0x081C, 2, 0), - MX6Q_PAD_CSI0_DAT11__UART1_RXD = IOMUX_PAD(0x0654, 0x0284, 3, 0x0920, 1, 0), - MX6Q_PAD_CSI0_DAT11__SDMA_DEBUG_PC_5 = IOMUX_PAD(0x0654, 0x0284, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT11__GPIO_5_29 = IOMUX_PAD(0x0654, 0x0284, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT11__MMDC_MMDC_DEBUG_34 = IOMUX_PAD(0x0654, 0x0284, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT11__CHEETAH_TRACE_8 = IOMUX_PAD(0x0654, 0x0284, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__IPU1_CSI0_D_12 = IOMUX_PAD(0x0658, 0x0288, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__WEIM_WEIM_D_8 = IOMUX_PAD(0x0658, 0x0288, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__PCIE_CTRL_MUX_16 = IOMUX_PAD(0x0658, 0x0288, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__UART4_TXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__UART4_TXD_RXD = IOMUX_PAD(0x0658, 0x0288, 3, 0x0938, 2, 0), - MX6Q_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 = IOMUX_PAD(0x0658, 0x0288, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__GPIO_5_30 = IOMUX_PAD(0x0658, 0x0288, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__MMDC_MMDC_DEBUG_35 = IOMUX_PAD(0x0658, 0x0288, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT12__CHEETAH_TRACE_9 = IOMUX_PAD(0x0658, 0x0288, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__IPU1_CSI0_D_13 = IOMUX_PAD(0x065C, 0x028C, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__WEIM_WEIM_D_9 = IOMUX_PAD(0x065C, 0x028C, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__PCIE_CTRL_MUX_17 = IOMUX_PAD(0x065C, 0x028C, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__UART4_RXD = IOMUX_PAD(0x065C, 0x028C, 3, 0x0938, 3, 0), - MX6Q_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 = IOMUX_PAD(0x065C, 0x028C, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__GPIO_5_31 = IOMUX_PAD(0x065C, 0x028C, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__MMDC_MMDC_DEBUG_36 = IOMUX_PAD(0x065C, 0x028C, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT13__CHEETAH_TRACE_10 = IOMUX_PAD(0x065C, 0x028C, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__IPU1_CSI0_D_14 = IOMUX_PAD(0x0660, 0x0290, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__WEIM_WEIM_D_10 = IOMUX_PAD(0x0660, 0x0290, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__PCIE_CTRL_MUX_18 = IOMUX_PAD(0x0660, 0x0290, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__UART5_TXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__UART5_TXD_RXD = IOMUX_PAD(0x0660, 0x0290, 3, 0x0940, 2, 0), - MX6Q_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 = IOMUX_PAD(0x0660, 0x0290, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__GPIO_6_0 = IOMUX_PAD(0x0660, 0x0290, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__MMDC_MMDC_DEBUG_37 = IOMUX_PAD(0x0660, 0x0290, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT14__CHEETAH_TRACE_11 = IOMUX_PAD(0x0660, 0x0290, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__IPU1_CSI0_D_15 = IOMUX_PAD(0x0664, 0x0294, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__WEIM_WEIM_D_11 = IOMUX_PAD(0x0664, 0x0294, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__PCIE_CTRL_MUX_19 = IOMUX_PAD(0x0664, 0x0294, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__UART5_RXD = IOMUX_PAD(0x0664, 0x0294, 3, 0x0940, 3, 0), - MX6Q_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 = IOMUX_PAD(0x0664, 0x0294, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__GPIO_6_1 = IOMUX_PAD(0x0664, 0x0294, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__MMDC_MMDC_DEBUG_38 = IOMUX_PAD(0x0664, 0x0294, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT15__CHEETAH_TRACE_12 = IOMUX_PAD(0x0664, 0x0294, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__IPU1_CSI0_D_16 = IOMUX_PAD(0x0668, 0x0298, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__WEIM_WEIM_D_12 = IOMUX_PAD(0x0668, 0x0298, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__PCIE_CTRL_MUX_20 = IOMUX_PAD(0x0668, 0x0298, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__UART4_CTS = IOMUX_PAD(0x0668, 0x0298, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__UART4_RTS = IOMUX_PAD(0x0668, 0x0298, 3, 0x0934, 0, 0), - MX6Q_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 = IOMUX_PAD(0x0668, 0x0298, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__GPIO_6_2 = IOMUX_PAD(0x0668, 0x0298, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__MMDC_MMDC_DEBUG_39 = IOMUX_PAD(0x0668, 0x0298, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT16__CHEETAH_TRACE_13 = IOMUX_PAD(0x0668, 0x0298, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT17__IPU1_CSI0_D_17 = IOMUX_PAD(0x066C, 0x029C, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT17__WEIM_WEIM_D_13 = IOMUX_PAD(0x066C, 0x029C, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT17__PCIE_CTRL_MUX_21 = IOMUX_PAD(0x066C, 0x029C, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT17__UART4_CTS = IOMUX_PAD(0x066C, 0x029C, 3, 0x0934, 1, 0), - MX6Q_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 = IOMUX_PAD(0x066C, 0x029C, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT17__GPIO_6_3 = IOMUX_PAD(0x066C, 0x029C, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT17__MMDC_MMDC_DEBUG_40 = IOMUX_PAD(0x066C, 0x029C, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT17__CHEETAH_TRACE_14 = IOMUX_PAD(0x066C, 0x029C, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__IPU1_CSI0_D_18 = IOMUX_PAD(0x0670, 0x02A0, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__WEIM_WEIM_D_14 = IOMUX_PAD(0x0670, 0x02A0, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__PCIE_CTRL_MUX_22 = IOMUX_PAD(0x0670, 0x02A0, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__UART5_CTS = IOMUX_PAD(0x0670, 0x02A0, 3, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__UART5_RTS = IOMUX_PAD(0x0670, 0x02A0, 3, 0x093C, 2, 0), - MX6Q_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 = IOMUX_PAD(0x0670, 0x02A0, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__GPIO_6_4 = IOMUX_PAD(0x0670, 0x02A0, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__MMDC_MMDC_DEBUG_41 = IOMUX_PAD(0x0670, 0x02A0, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT18__CHEETAH_TRACE_15 = IOMUX_PAD(0x0670, 0x02A0, 7, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT19__IPU1_CSI0_D_19 = IOMUX_PAD(0x0674, 0x02A4, 0, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT19__WEIM_WEIM_D_15 = IOMUX_PAD(0x0674, 0x02A4, 1, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT19__PCIE_CTRL_MUX_23 = IOMUX_PAD(0x0674, 0x02A4, 2, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT19__UART5_CTS = IOMUX_PAD(0x0674, 0x02A4, 3, 0x093C, 3, 0), - MX6Q_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 = IOMUX_PAD(0x0674, 0x02A4, 4, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT19__GPIO_6_5 = IOMUX_PAD(0x0674, 0x02A4, 5, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT19__MMDC_MMDC_DEBUG_42 = IOMUX_PAD(0x0674, 0x02A4, 6, 0x0000, 0, 0), - MX6Q_PAD_CSI0_DAT19__ANATOP_TESTO_9 = IOMUX_PAD(0x0674, 0x02A4, 7, 0x0000, 0, 0), - MX6Q_PAD_JTAG_TMS__SJC_TMS = IOMUX_PAD(0x0678, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_JTAG_MOD__SJC_MOD = IOMUX_PAD(0x067C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_JTAG_TRSTB__SJC_TRSTB = IOMUX_PAD(0x0680, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_JTAG_TDI__SJC_TDI = IOMUX_PAD(0x0684, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_JTAG_TCK__SJC_TCK = IOMUX_PAD(0x0688, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_JTAG_TDO__SJC_TDO = IOMUX_PAD(0x068C, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_TAMPER__SNVS_LP_WRAP_SNVS_TD1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_PMIC_ON_REQ__SNVS_LPWRAP_WKALM = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_PMIC_STBY_REQ__CCM_PMIC_STBYRQ = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_POR_B__SRC_POR_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_BOOT_MODE1__SRC_BOOT_MODE_1 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_RESET_IN_B__SRC_RESET_B = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_BOOT_MODE0__SRC_BOOT_MODE_0 = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_TEST_MODE__TCU_TEST_MODE = IOMUX_PAD(NO_PAD_I, NO_MUX_I, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 = IOMUX_PAD(0x0690, 0x02A8, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__UART1_TXD_RXD = IOMUX_PAD(0x0690, 0x02A8, 1, 0x0920, 2, 0), - MX6Q_PAD_SD3_DAT7__PCIE_CTRL_MUX_24 = IOMUX_PAD(0x0690, 0x02A8, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__USBOH3_UH3_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__USBOH3_UH2_DFD_OUT_0 = IOMUX_PAD(0x0690, 0x02A8, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__GPIO_6_17 = IOMUX_PAD(0x0690, 0x02A8, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__MIPI_CORE_DPHY_IN_12 = IOMUX_PAD(0x0690, 0x02A8, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT7__USBPHY2_CLK20DIV = IOMUX_PAD(0x0690, 0x02A8, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 = IOMUX_PAD(0x0694, 0x02AC, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0920, 3, 0), - MX6Q_PAD_SD3_DAT6__PCIE_CTRL_MUX_25 = IOMUX_PAD(0x0694, 0x02AC, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__USBOH3_UH3_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__USBOH3_UH2_DFD_OUT_1 = IOMUX_PAD(0x0694, 0x02AC, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__GPIO_6_18 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__MIPI_CORE_DPHY_IN_13 = IOMUX_PAD(0x0694, 0x02AC, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT6__ANATOP_TESTO_10 = IOMUX_PAD(0x0694, 0x02AC, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 = IOMUX_PAD(0x0698, 0x02B0, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__UART2_TXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__UART2_TXD_RXD = IOMUX_PAD(0x0698, 0x02B0, 1, 0x0928, 4, 0), - MX6Q_PAD_SD3_DAT5__PCIE_CTRL_MUX_26 = IOMUX_PAD(0x0698, 0x02B0, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__USBOH3_UH3_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__USBOH3_UH2_DFD_OUT_2 = IOMUX_PAD(0x0698, 0x02B0, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__MIPI_CORE_DPHY_IN_14 = IOMUX_PAD(0x0698, 0x02B0, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT5__ANATOP_TESTO_11 = IOMUX_PAD(0x0698, 0x02B0, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 = IOMUX_PAD(0x069C, 0x02B4, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__UART2_RXD = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0928, 5, 0), - MX6Q_PAD_SD3_DAT4__PCIE_CTRL_MUX_27 = IOMUX_PAD(0x069C, 0x02B4, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__USBOH3_UH3_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__USBOH3_UH2_DFD_OUT_3 = IOMUX_PAD(0x069C, 0x02B4, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__GPIO_7_1 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__MIPI_CORE_DPHY_IN_15 = IOMUX_PAD(0x069C, 0x02B4, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT4__ANATOP_TESTO_12 = IOMUX_PAD(0x069C, 0x02B4, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06A0, 0x02B8, 16, 0x0000, 0, 0), - MX6Q_PAD_SD3_CMD__UART2_CTS = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0924, 2, 0), - MX6Q_PAD_SD3_CMD__CAN1_TXCAN = IOMUX_PAD(0x06A0, 0x02B8, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_CMD__USBOH3_UH3_DFD_OUT_4 = IOMUX_PAD(0x06A0, 0x02B8, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_CMD__USBOH3_UH2_DFD_OUT_4 = IOMUX_PAD(0x06A0, 0x02B8, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_CMD__GPIO_7_2 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_CMD__MIPI_CORE_DPHY_IN_16 = IOMUX_PAD(0x06A0, 0x02B8, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_CMD__ANATOP_TESTO_13 = IOMUX_PAD(0x06A0, 0x02B8, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06A4, 0x02BC, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_CLK__UART2_CTS = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0000, 0, 0), - MX6Q_PAD_SD3_CLK__UART2_RTS = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0924, 3, 0), - MX6Q_PAD_SD3_CLK__CAN1_RXCAN = IOMUX_PAD(0x06A4, 0x02BC, 2, 0x07E4, 2, 0), - MX6Q_PAD_SD3_CLK__USBOH3_UH3_DFD_OUT_5 = IOMUX_PAD(0x06A4, 0x02BC, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_CLK__USBOH3_UH2_DFD_OUT_5 = IOMUX_PAD(0x06A4, 0x02BC, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_CLK__GPIO_7_3 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_CLK__MIPI_CORE_DPHY_IN_17 = IOMUX_PAD(0x06A4, 0x02BC, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_CLK__ANATOP_TESTO_14 = IOMUX_PAD(0x06A4, 0x02BC, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06A8, 0x02C0, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT0__UART1_CTS = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x091C, 2, 0), - MX6Q_PAD_SD3_DAT0__CAN2_TXCAN = IOMUX_PAD(0x06A8, 0x02C0, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT0__USBOH3_UH3_DFD_OUT_6 = IOMUX_PAD(0x06A8, 0x02C0, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT0__USBOH3_UH2_DFD_OUT_6 = IOMUX_PAD(0x06A8, 0x02C0, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT0__GPIO_7_4 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT0__MIPI_CORE_DPHY_IN_18 = IOMUX_PAD(0x06A8, 0x02C0, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT0__ANATOP_TESTO_15 = IOMUX_PAD(0x06A8, 0x02C0, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x06AC, 0x02C4, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT1__UART1_CTS = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT1__UART1_RTS = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x091C, 3, 0), - MX6Q_PAD_SD3_DAT1__CAN2_RXCAN = IOMUX_PAD(0x06AC, 0x02C4, 2, 0x07E8, 1, 0), - MX6Q_PAD_SD3_DAT1__USBOH3_UH3_DFD_OUT_7 = IOMUX_PAD(0x06AC, 0x02C4, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT1__USBOH3_UH2_DFD_OUT_7 = IOMUX_PAD(0x06AC, 0x02C4, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT1__GPIO_7_5 = IOMUX_PAD(0x06AC, 0x02C4, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT1__MIPI_CORE_DPHY_IN_19 = IOMUX_PAD(0x06AC, 0x02C4, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT1__ANATOP_TESTI_0 = IOMUX_PAD(0x06AC, 0x02C4, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x06B0, 0x02C8, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT2__PCIE_CTRL_MUX_28 = IOMUX_PAD(0x06B0, 0x02C8, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT2__USBOH3_UH3_DFD_OUT_8 = IOMUX_PAD(0x06B0, 0x02C8, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT2__USBOH3_UH2_DFD_OUT_8 = IOMUX_PAD(0x06B0, 0x02C8, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT2__GPIO_7_6 = IOMUX_PAD(0x06B0, 0x02C8, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT2__MIPI_CORE_DPHY_IN_20 = IOMUX_PAD(0x06B0, 0x02C8, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT2__ANATOP_TESTI_1 = IOMUX_PAD(0x06B0, 0x02C8, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x06B4, 0x02CC, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT3__UART3_CTS = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x092C, 4, 0), - MX6Q_PAD_SD3_DAT3__PCIE_CTRL_MUX_29 = IOMUX_PAD(0x06B4, 0x02CC, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT3__USBOH3_UH3_DFD_OUT_9 = IOMUX_PAD(0x06B4, 0x02CC, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT3__USBOH3_UH2_DFD_OUT_9 = IOMUX_PAD(0x06B4, 0x02CC, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT3__GPIO_7_7 = IOMUX_PAD(0x06B4, 0x02CC, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT3__MIPI_CORE_DPHY_IN_21 = IOMUX_PAD(0x06B4, 0x02CC, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_DAT3__ANATOP_TESTI_2 = IOMUX_PAD(0x06B4, 0x02CC, 7, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__USDHC3_RST = IOMUX_PAD(0x06B8, 0x02D0, 0, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__UART3_CTS = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__UART3_RTS = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x092C, 5, 0), - MX6Q_PAD_SD3_RST__PCIE_CTRL_MUX_30 = IOMUX_PAD(0x06B8, 0x02D0, 2, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__USBOH3_UH3_DFD_OUT_10 = IOMUX_PAD(0x06B8, 0x02D0, 3, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__USBOH3_UH2_DFD_OUT_10 = IOMUX_PAD(0x06B8, 0x02D0, 4, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__GPIO_7_8 = IOMUX_PAD(0x06B8, 0x02D0, 5, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__MIPI_CORE_DPHY_IN_22 = IOMUX_PAD(0x06B8, 0x02D0, 6, 0x0000, 0, 0), - MX6Q_PAD_SD3_RST__ANATOP_ANATOP_TESTI_3 = IOMUX_PAD(0x06B8, 0x02D0, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__RAWNAND_CLE = IOMUX_PAD(0x06BC, 0x02D4, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__IPU2_SISG_4 = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__PCIE_CTRL_MUX_31 = IOMUX_PAD(0x06BC, 0x02D4, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__USBOH3_UH3_DFD_OT11 = IOMUX_PAD(0x06BC, 0x02D4, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__USBOH3_UH2_DFD_OT11 = IOMUX_PAD(0x06BC, 0x02D4, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__GPIO_6_7 = IOMUX_PAD(0x06BC, 0x02D4, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__MIPI_CORE_DPHY_IN23 = IOMUX_PAD(0x06BC, 0x02D4, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CLE__TPSMP_HTRANS_0 = IOMUX_PAD(0x06BC, 0x02D4, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__RAWNAND_ALE = IOMUX_PAD(0x06C0, 0x02D8, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__USDHC4_RST = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__PCIE_CTRL_MUX_0 = IOMUX_PAD(0x06C0, 0x02D8, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__USBOH3_UH3_DFD_OT12 = IOMUX_PAD(0x06C0, 0x02D8, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__USBOH3_UH2_DFD_OT12 = IOMUX_PAD(0x06C0, 0x02D8, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__GPIO_6_8 = IOMUX_PAD(0x06C0, 0x02D8, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__MIPI_CR_DPHY_IN_24 = IOMUX_PAD(0x06C0, 0x02D8, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_ALE__TPSMP_HTRANS_1 = IOMUX_PAD(0x06C0, 0x02D8, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN = IOMUX_PAD(0x06C4, 0x02DC, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__IPU2_SISG_5 = IOMUX_PAD(0x06C4, 0x02DC, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__PCIE_CTRL__MUX_1 = IOMUX_PAD(0x06C4, 0x02DC, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__USBOH3_UH3_DFDOT13 = IOMUX_PAD(0x06C4, 0x02DC, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__USBOH3_UH2_DFDOT13 = IOMUX_PAD(0x06C4, 0x02DC, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__GPIO_6_9 = IOMUX_PAD(0x06C4, 0x02DC, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__MIPI_CR_DPHY_OUT32 = IOMUX_PAD(0x06C4, 0x02DC, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_WP_B__PL301_PER1_HSIZE_0 = IOMUX_PAD(0x06C4, 0x02DC, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 = IOMUX_PAD(0x06C8, 0x02E0, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__IPU2_DI0_PIN1 = IOMUX_PAD(0x06C8, 0x02E0, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__PCIE_CTRL_MUX_2 = IOMUX_PAD(0x06C8, 0x02E0, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__USBOH3_UH3_DFD_OT14 = IOMUX_PAD(0x06C8, 0x02E0, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__USBOH3_UH2_DFD_OT14 = IOMUX_PAD(0x06C8, 0x02E0, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__GPIO_6_10 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__MIPI_CR_DPHY_OUT_33 = IOMUX_PAD(0x06C8, 0x02E0, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_RB0__PL301_PER1_HSIZE_1 = IOMUX_PAD(0x06C8, 0x02E0, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N = IOMUX_PAD(0x06CC, 0x02E4, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS0__USBOH3_UH3_DFD_OT15 = IOMUX_PAD(0x06CC, 0x02E4, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS0__USBOH3_UH2_DFD_OT15 = IOMUX_PAD(0x06CC, 0x02E4, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS0__GPIO_6_11 = IOMUX_PAD(0x06CC, 0x02E4, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS0__PL301_PER1_HSIZE_2 = IOMUX_PAD(0x06CC, 0x02E4, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N = IOMUX_PAD(0x06D0, 0x02E8, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS1__USDHC4_VSELECT = IOMUX_PAD(0x06D0, 0x02E8, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS1__USDHC3_VSELECT = IOMUX_PAD(0x06D0, 0x02E8, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS1__PCIE_CTRL_MUX_3 = IOMUX_PAD(0x06D0, 0x02E8, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS1__GPIO_6_14 = IOMUX_PAD(0x06D0, 0x02E8, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS1__PL301_PER1_HRDYOUT = IOMUX_PAD(0x06D0, 0x02E8, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N = IOMUX_PAD(0x06D4, 0x02EC, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS2__IPU1_SISG_0 = IOMUX_PAD(0x06D4, 0x02EC, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS2__ESAI1_TX0 = IOMUX_PAD(0x06D4, 0x02EC, 2, 0x0874, 1, 0), - MX6Q_PAD_NANDF_CS2__WEIM_WEIM_CRE = IOMUX_PAD(0x06D4, 0x02EC, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS2__CCM_CLKO2 = IOMUX_PAD(0x06D4, 0x02EC, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS2__GPIO_6_15 = IOMUX_PAD(0x06D4, 0x02EC, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS2__IPU2_SISG_0 = IOMUX_PAD(0x06D4, 0x02EC, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N = IOMUX_PAD(0x06D8, 0x02F0, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS3__IPU1_SISG_1 = IOMUX_PAD(0x06D8, 0x02F0, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS3__ESAI1_TX1 = IOMUX_PAD(0x06D8, 0x02F0, 2, 0x0878, 1, 0), - MX6Q_PAD_NANDF_CS3__WEIM_WEIM_A_26 = IOMUX_PAD(0x06D8, 0x02F0, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS3__PCIE_CTRL_MUX_4 = IOMUX_PAD(0x06D8, 0x02F0, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS3__GPIO_6_16 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS3__IPU2_SISG_1 = IOMUX_PAD(0x06D8, 0x02F0, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_CS3__TPSMP_CLK = IOMUX_PAD(0x06D8, 0x02F0, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x06DC, 0x02F4, 16, 0x0000, 0, 0), - MX6Q_PAD_SD4_CMD__RAWNAND_RDN = IOMUX_PAD(0x06DC, 0x02F4, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_CMD__UART3_TXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0000, 0, 0), - MX6Q_PAD_SD4_CMD__UART3_TXD_RXD = IOMUX_PAD(0x06DC, 0x02F4, 2, 0x0930, 2, 0), - MX6Q_PAD_SD4_CMD__PCIE_CTRL_MUX_5 = IOMUX_PAD(0x06DC, 0x02F4, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_CMD__GPIO_7_9 = IOMUX_PAD(0x06DC, 0x02F4, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_CMD__TPSMP_HDATA_DIR = IOMUX_PAD(0x06DC, 0x02F4, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x06E0, 0x02F8, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_CLK__RAWNAND_WRN = IOMUX_PAD(0x06E0, 0x02F8, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_CLK__UART3_RXD = IOMUX_PAD(0x06E0, 0x02F8, 2, 0x0930, 3, 0), - MX6Q_PAD_SD4_CLK__PCIE_CTRL_MUX_6 = IOMUX_PAD(0x06E0, 0x02F8, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_CLK__GPIO_7_10 = IOMUX_PAD(0x06E0, 0x02F8, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__RAWNAND_D0 = IOMUX_PAD(0x06E4, 0x02FC, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__USDHC1_DAT4 = IOMUX_PAD(0x06E4, 0x02FC, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__GPU3D_GPU_DBG_OUT_0 = IOMUX_PAD(0x06E4, 0x02FC, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__USBOH3_UH2_DFD_OUT16 = IOMUX_PAD(0x06E4, 0x02FC, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__USBOH3_UH3_DFD_OUT16 = IOMUX_PAD(0x06E4, 0x02FC, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__GPIO_2_0 = IOMUX_PAD(0x06E4, 0x02FC, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__IPU1_IPU_DIAG_BUS_0 = IOMUX_PAD(0x06E4, 0x02FC, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D0__IPU2_IPU_DIAG_BUS_0 = IOMUX_PAD(0x06E4, 0x02FC, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__RAWNAND_D1 = IOMUX_PAD(0x06E8, 0x0300, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__USDHC1_DAT5 = IOMUX_PAD(0x06E8, 0x0300, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__GPU3D_GPU_DEBUG_OUT1 = IOMUX_PAD(0x06E8, 0x0300, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__USBOH3_UH2_DFD_OUT17 = IOMUX_PAD(0x06E8, 0x0300, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__USBOH3_UH3_DFD_OUT17 = IOMUX_PAD(0x06E8, 0x0300, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x06E8, 0x0300, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__IPU1_IPU_DIAG_BUS_1 = IOMUX_PAD(0x06E8, 0x0300, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D1__IPU2_IPU_DIAG_BUS_1 = IOMUX_PAD(0x06E8, 0x0300, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__RAWNAND_D2 = IOMUX_PAD(0x06EC, 0x0304, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__USDHC1_DAT6 = IOMUX_PAD(0x06EC, 0x0304, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__GPU3D_GPU_DBG_OUT_2 = IOMUX_PAD(0x06EC, 0x0304, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__USBOH3_UH2_DFD_OUT18 = IOMUX_PAD(0x06EC, 0x0304, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__USBOH3_UH3_DFD_OUT18 = IOMUX_PAD(0x06EC, 0x0304, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x06EC, 0x0304, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__IPU1_IPU_DIAG_BUS_2 = IOMUX_PAD(0x06EC, 0x0304, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D2__IPU2_IPU_DIAG_BUS_2 = IOMUX_PAD(0x06EC, 0x0304, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__RAWNAND_D3 = IOMUX_PAD(0x06F0, 0x0308, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__USDHC1_DAT7 = IOMUX_PAD(0x06F0, 0x0308, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__GPU3D_GPU_DBG_OUT_3 = IOMUX_PAD(0x06F0, 0x0308, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__USBOH3_UH2_DFD_OUT19 = IOMUX_PAD(0x06F0, 0x0308, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__USBOH3_UH3_DFD_OUT19 = IOMUX_PAD(0x06F0, 0x0308, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x06F0, 0x0308, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__IPU1_IPU_DIAG_BUS_3 = IOMUX_PAD(0x06F0, 0x0308, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D3__IPU2_IPU_DIAG_BUS_3 = IOMUX_PAD(0x06F0, 0x0308, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__RAWNAND_D4 = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__USDHC2_DAT4 = IOMUX_PAD(0x06F4, 0x030C, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__GPU3D_GPU_DBG_OUT_4 = IOMUX_PAD(0x06F4, 0x030C, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__USBOH3_UH2_DFD_OUT20 = IOMUX_PAD(0x06F4, 0x030C, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__USBOH3_UH3_DFD_OUT20 = IOMUX_PAD(0x06F4, 0x030C, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x06F4, 0x030C, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__IPU1_IPU_DIAG_BUS_4 = IOMUX_PAD(0x06F4, 0x030C, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D4__IPU2_IPU_DIAG_BUS_4 = IOMUX_PAD(0x06F4, 0x030C, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__RAWNAND_D5 = IOMUX_PAD(0x06F8, 0x0310, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__USDHC2_DAT5 = IOMUX_PAD(0x06F8, 0x0310, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__GPU3D_GPU_DBG_OUT_5 = IOMUX_PAD(0x06F8, 0x0310, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__USBOH3_UH2_DFD_OUT21 = IOMUX_PAD(0x06F8, 0x0310, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__USBOH3_UH3_DFD_OUT21 = IOMUX_PAD(0x06F8, 0x0310, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__GPIO_2_5 = IOMUX_PAD(0x06F8, 0x0310, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__IPU1_IPU_DIAG_BUS_5 = IOMUX_PAD(0x06F8, 0x0310, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D5__IPU2_IPU_DIAG_BUS_5 = IOMUX_PAD(0x06F8, 0x0310, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__RAWNAND_D6 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__USDHC2_DAT6 = IOMUX_PAD(0x06FC, 0x0314, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__GPU3D_GPU_DBG_OUT_6 = IOMUX_PAD(0x06FC, 0x0314, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__USBOH3_UH2_DFD_OUT22 = IOMUX_PAD(0x06FC, 0x0314, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__USBOH3_UH3_DFD_OUT22 = IOMUX_PAD(0x06FC, 0x0314, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x06FC, 0x0314, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__IPU1_IPU_DIAG_BUS_6 = IOMUX_PAD(0x06FC, 0x0314, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D6__IPU2_IPU_DIAG_BUS_6 = IOMUX_PAD(0x06FC, 0x0314, 7, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__RAWNAND_D7 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__USDHC2_DAT7 = IOMUX_PAD(0x0700, 0x0318, 1, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__GPU3D_GPU_DBG_OUT_7 = IOMUX_PAD(0x0700, 0x0318, 2, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__USBOH3_UH2_DFD_OUT23 = IOMUX_PAD(0x0700, 0x0318, 3, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__USBOH3_UH3_DFD_OUT23 = IOMUX_PAD(0x0700, 0x0318, 4, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__GPIO_2_7 = IOMUX_PAD(0x0700, 0x0318, 5, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__IPU1_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0700, 0x0318, 6, 0x0000, 0, 0), - MX6Q_PAD_NANDF_D7__IPU2_IPU_DIAG_BUS_7 = IOMUX_PAD(0x0700, 0x0318, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__RAWNAND_D8 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0704, 0x031C, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__RAWNAND_DQS = IOMUX_PAD(0x0704, 0x031C, 2, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__USBOH3_UH2_DFD_OUT24 = IOMUX_PAD(0x0704, 0x031C, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__USBOH3_UH3_DFD_OUT24 = IOMUX_PAD(0x0704, 0x031C, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__GPIO_2_8 = IOMUX_PAD(0x0704, 0x031C, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__IPU1_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0704, 0x031C, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT0__IPU2_IPU_DIAG_BUS_8 = IOMUX_PAD(0x0704, 0x031C, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__RAWNAND_D9 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x0708, 0x0320, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__PWM3_PWMO = IOMUX_PAD(0x0708, 0x0320, 2, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__USBOH3_UH2_DFD_OUT25 = IOMUX_PAD(0x0708, 0x0320, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__USBOH3_UH3_DFD_OUT25 = IOMUX_PAD(0x0708, 0x0320, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__GPIO_2_9 = IOMUX_PAD(0x0708, 0x0320, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__IPU1_IPU_DIAG_BUS_9 = IOMUX_PAD(0x0708, 0x0320, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT1__IPU2_IPU_DIAG_BUS_9 = IOMUX_PAD(0x0708, 0x0320, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__RAWNAND_D10 = IOMUX_PAD(0x070C, 0x0324, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x070C, 0x0324, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__PWM4_PWMO = IOMUX_PAD(0x070C, 0x0324, 2, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__USBOH3_UH2_DFD_OUT26 = IOMUX_PAD(0x070C, 0x0324, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__USBOH3_UH3_DFD_OUT26 = IOMUX_PAD(0x070C, 0x0324, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__GPIO_2_10 = IOMUX_PAD(0x070C, 0x0324, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__IPU1_IPU_DIAG_BUS_10 = IOMUX_PAD(0x070C, 0x0324, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT2__IPU2_IPU_DIAG_BUS_10 = IOMUX_PAD(0x070C, 0x0324, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT3__RAWNAND_D11 = IOMUX_PAD(0x0710, 0x0328, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0710, 0x0328, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT3__USBOH3_UH2_DFD_OUT27 = IOMUX_PAD(0x0710, 0x0328, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT3__USBOH3_UH3_DFD_OUT27 = IOMUX_PAD(0x0710, 0x0328, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT3__GPIO_2_11 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT3__IPU1_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT3__IPU2_IPU_DIAG_BUS_11 = IOMUX_PAD(0x0710, 0x0328, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__RAWNAND_D12 = IOMUX_PAD(0x0714, 0x032C, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 = IOMUX_PAD(0x0714, 0x032C, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__UART2_RXD = IOMUX_PAD(0x0714, 0x032C, 2, 0x0928, 6, 0), - MX6Q_PAD_SD4_DAT4__USBOH3_UH2_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__USBOH3_UH3_DFD_OUT28 = IOMUX_PAD(0x0714, 0x032C, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__GPIO_2_12 = IOMUX_PAD(0x0714, 0x032C, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__IPU1_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0714, 0x032C, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT4__IPU2_IPU_DIAG_BUS_12 = IOMUX_PAD(0x0714, 0x032C, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__RAWNAND_D13 = IOMUX_PAD(0x0718, 0x0330, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__UART2_CTS = IOMUX_PAD(0x0718, 0x0330, 2, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__UART2_RTS = IOMUX_PAD(0x0718, 0x0330, 2, 0x0924, 4, 0), - MX6Q_PAD_SD4_DAT5__USBOH3_UH2_DFD_OUT29 = IOMUX_PAD(0x0718, 0x0330, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__USBOH3_UH3_DFD_OUT29 = IOMUX_PAD(0x0718, 0x0330, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__GPIO_2_13 = IOMUX_PAD(0x0718, 0x0330, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__IPU1_IPU_DIAG_BUS_13 = IOMUX_PAD(0x0718, 0x0330, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT5__IPU2_IPU_DIAG_BUS_13 = IOMUX_PAD(0x0718, 0x0330, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT6__RAWNAND_D14 = IOMUX_PAD(0x071C, 0x0334, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 = IOMUX_PAD(0x071C, 0x0334, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT6__UART2_CTS = IOMUX_PAD(0x071C, 0x0334, 2, 0x0924, 5, 0), - MX6Q_PAD_SD4_DAT6__USBOH3_UH2_DFD_OUT30 = IOMUX_PAD(0x071C, 0x0334, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT6__USBOH3_UH3_DFD_OUT30 = IOMUX_PAD(0x071C, 0x0334, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT6__GPIO_2_14 = IOMUX_PAD(0x071C, 0x0334, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT6__IPU1_IPU_DIAG_BUS_14 = IOMUX_PAD(0x071C, 0x0334, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT6__IPU2_IPU_DIAG_BUS_14 = IOMUX_PAD(0x071C, 0x0334, 7, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__RAWNAND_D15 = IOMUX_PAD(0x0720, 0x0338, 0, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 = IOMUX_PAD(0x0720, 0x0338, 1, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__UART2_TXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__UART2_TXD_RXD = IOMUX_PAD(0x0720, 0x0338, 2, 0x0928, 7, 0), - MX6Q_PAD_SD4_DAT7__USBOH3_UH2_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 3, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__USBOH3_UH3_DFD_OUT31 = IOMUX_PAD(0x0720, 0x0338, 4, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__GPIO_2_15 = IOMUX_PAD(0x0720, 0x0338, 5, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__IPU1_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0720, 0x0338, 6, 0x0000, 0, 0), - MX6Q_PAD_SD4_DAT7__IPU2_IPU_DIAG_BUS_15 = IOMUX_PAD(0x0720, 0x0338, 7, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT1__USDHC1_DAT1 = IOMUX_PAD(0x0724, 0x033C, 0, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT1__ECSPI5_SS0 = IOMUX_PAD(0x0724, 0x033C, 1, 0x0834, 1, 0), - MX6Q_PAD_SD1_DAT1__PWM3_PWMO = IOMUX_PAD(0x0724, 0x033C, 2, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT1__GPT_CAPIN2 = IOMUX_PAD(0x0724, 0x033C, 3, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT1__PCIE_CTRL_MUX_7 = IOMUX_PAD(0x0724, 0x033C, 4, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT1__GPIO_1_17 = IOMUX_PAD(0x0724, 0x033C, 5, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT1__HDMI_TX_OPHYDTB_0 = IOMUX_PAD(0x0724, 0x033C, 6, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT1__ANATOP_TESTO_8 = IOMUX_PAD(0x0724, 0x033C, 7, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT0__USDHC1_DAT0 = IOMUX_PAD(0x0728, 0x0340, 0, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT0__ECSPI5_MISO = IOMUX_PAD(0x0728, 0x0340, 1, 0x082C, 1, 0), - MX6Q_PAD_SD1_DAT0__CAAM_WRAP_RNG_OSCOBS = IOMUX_PAD(0x0728, 0x0340, 2, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT0__GPT_CAPIN1 = IOMUX_PAD(0x0728, 0x0340, 3, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT0__PCIE_CTRL_MUX_8 = IOMUX_PAD(0x0728, 0x0340, 4, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT0__GPIO_1_16 = IOMUX_PAD(0x0728, 0x0340, 5, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT0__HDMI_TX_OPHYDTB_1 = IOMUX_PAD(0x0728, 0x0340, 6, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT0__ANATOP_TESTO_7 = IOMUX_PAD(0x0728, 0x0340, 7, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__USDHC1_DAT3 = IOMUX_PAD(0x072C, 0x0344, 0, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__ECSPI5_SS2 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__GPT_CMPOUT3 = IOMUX_PAD(0x072C, 0x0344, 2, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__PWM1_PWMO = IOMUX_PAD(0x072C, 0x0344, 3, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_B = IOMUX_PAD(0x072C, 0x0344, 4, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x072C, 0x0344, 5, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__WDOG2_WDOG_RST_B_DEB = IOMUX_PAD(0x072C, 0x0344, 6, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT3__ANATOP_TESTO_6 = IOMUX_PAD(0x072C, 0x0344, 7, 0x0000, 0, 0), - MX6Q_PAD_SD1_CMD__USDHC1_CMD = IOMUX_PAD(0x0730, 0x0348, 16, 0x0000, 0, 0), - MX6Q_PAD_SD1_CMD__ECSPI5_MOSI = IOMUX_PAD(0x0730, 0x0348, 1, 0x0830, 0, 0), - MX6Q_PAD_SD1_CMD__PWM4_PWMO = IOMUX_PAD(0x0730, 0x0348, 2, 0x0000, 0, 0), - MX6Q_PAD_SD1_CMD__GPT_CMPOUT1 = IOMUX_PAD(0x0730, 0x0348, 3, 0x0000, 0, 0), - MX6Q_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x0730, 0x0348, 5, 0x0000, 0, 0), - MX6Q_PAD_SD1_CMD__ANATOP_TESTO_5 = IOMUX_PAD(0x0730, 0x0348, 7, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT2__USDHC1_DAT2 = IOMUX_PAD(0x0734, 0x034C, 0, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT2__ECSPI5_SS1 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0838, 1, 0), - MX6Q_PAD_SD1_DAT2__GPT_CMPOUT2 = IOMUX_PAD(0x0734, 0x034C, 2, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT2__PWM2_PWMO = IOMUX_PAD(0x0734, 0x034C, 3, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_B = IOMUX_PAD(0x0734, 0x034C, 4, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT2__GPIO_1_19 = IOMUX_PAD(0x0734, 0x034C, 5, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT2__WDOG1_WDOG_RST_B_DEB = IOMUX_PAD(0x0734, 0x034C, 6, 0x0000, 0, 0), - MX6Q_PAD_SD1_DAT2__ANATOP_TESTO_4 = IOMUX_PAD(0x0734, 0x034C, 7, 0x0000, 0, 0), - MX6Q_PAD_SD1_CLK__USDHC1_CLK = IOMUX_PAD(0x0738, 0x0350, 0, 0x0000, 0, 0), - MX6Q_PAD_SD1_CLK__ECSPI5_SCLK = IOMUX_PAD(0x0738, 0x0350, 1, 0x0828, 0, 0), - MX6Q_PAD_SD1_CLK__OSC32K_32K_OUT = IOMUX_PAD(0x0738, 0x0350, 2, 0x0000, 0, 0), - MX6Q_PAD_SD1_CLK__GPT_CLKIN = IOMUX_PAD(0x0738, 0x0350, 3, 0x0000, 0, 0), - MX6Q_PAD_SD1_CLK__GPIO_1_20 = IOMUX_PAD(0x0738, 0x0350, 5, 0x0000, 0, 0), - MX6Q_PAD_SD1_CLK__PHY_DTB_0 = IOMUX_PAD(0x0738, 0x0350, 6, 0x0000, 0, 0), - MX6Q_PAD_SD1_CLK__SATA_PHY_DTB_0 = IOMUX_PAD(0x0738, 0x0350, 7, 0x0000, 0, 0), - MX6Q_PAD_SD2_CLK__USDHC2_CLK = IOMUX_PAD(0x073C, 0x0354, 0, 0x0000, 0, 0), - MX6Q_PAD_SD2_CLK__ECSPI5_SCLK = IOMUX_PAD(0x073C, 0x0354, 1, 0x0828, 1, 0), - MX6Q_PAD_SD2_CLK__KPP_COL_5 = IOMUX_PAD(0x073C, 0x0354, 2, 0x08E8, 3, 0), - MX6Q_PAD_SD2_CLK__AUDMUX_AUD4_RXFS = IOMUX_PAD(0x073C, 0x0354, 3, 0x07C0, 1, 0), - MX6Q_PAD_SD2_CLK__PCIE_CTRL_MUX_9 = IOMUX_PAD(0x073C, 0x0354, 4, 0x0000, 0, 0), - MX6Q_PAD_SD2_CLK__GPIO_1_10 = IOMUX_PAD(0x073C, 0x0354, 5, 0x0000, 0, 0), - MX6Q_PAD_SD2_CLK__PHY_DTB_1 = IOMUX_PAD(0x073C, 0x0354, 6, 0x0000, 0, 0), - MX6Q_PAD_SD2_CLK__SATA_PHY_DTB_1 = IOMUX_PAD(0x073C, 0x0354, 7, 0x0000, 0, 0), - MX6Q_PAD_SD2_CMD__USDHC2_CMD = IOMUX_PAD(0x0740, 0x0358, 16, 0x0000, 0, 0), - MX6Q_PAD_SD2_CMD__ECSPI5_MOSI = IOMUX_PAD(0x0740, 0x0358, 1, 0x0830, 1, 0), - MX6Q_PAD_SD2_CMD__KPP_ROW_5 = IOMUX_PAD(0x0740, 0x0358, 2, 0x08F4, 2, 0), - MX6Q_PAD_SD2_CMD__AUDMUX_AUD4_RXC = IOMUX_PAD(0x0740, 0x0358, 3, 0x07BC, 1, 0), - MX6Q_PAD_SD2_CMD__PCIE_CTRL_MUX_10 = IOMUX_PAD(0x0740, 0x0358, 4, 0x0000, 0, 0), - MX6Q_PAD_SD2_CMD__GPIO_1_11 = IOMUX_PAD(0x0740, 0x0358, 5, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 = IOMUX_PAD(0x0744, 0x035C, 0, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT3__ECSPI5_SS3 = IOMUX_PAD(0x0744, 0x035C, 1, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT3__KPP_COL_6 = IOMUX_PAD(0x0744, 0x035C, 2, 0x08EC, 2, 0), - MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC = IOMUX_PAD(0x0744, 0x035C, 3, 0x07C4, 1, 0), - MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11 = IOMUX_PAD(0x0744, 0x035C, 4, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT3__GPIO_1_12 = IOMUX_PAD(0x0744, 0x035C, 5, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT3__SJC_DONE = IOMUX_PAD(0x0744, 0x035C, 6, 0x0000, 0, 0), - MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 = IOMUX_PAD(0x0744, 0x035C, 7, 0x0000, 0, 0), -}; - -#endif /* __ASM_ARCH_MX6_MX6X_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/mxc_hdmi.h b/arch/arm/include/asm/arch-mx6/mxc_hdmi.h index 02a413f2bc..9dccb3fef5 100644 --- a/arch/arm/include/asm/arch-mx6/mxc_hdmi.h +++ b/arch/arm/include/asm/arch-mx6/mxc_hdmi.h @@ -24,542 +24,553 @@ /* * Hdmi controller registers */ - -/* Identification Registers */ -#define HDMI_DESIGN_ID 0x0000 -#define HDMI_REVISION_ID 0x0001 -#define HDMI_PRODUCT_ID0 0x0002 -#define HDMI_PRODUCT_ID1 0x0003 -#define HDMI_CONFIG0_ID 0x0004 -#define HDMI_CONFIG1_ID 0x0005 -#define HDMI_CONFIG2_ID 0x0006 -#define HDMI_CONFIG3_ID 0x0007 - -/* Interrupt Registers */ -#define HDMI_IH_FC_STAT0 0x0100 -#define HDMI_IH_FC_STAT1 0x0101 -#define HDMI_IH_FC_STAT2 0x0102 -#define HDMI_IH_AS_STAT0 0x0103 -#define HDMI_IH_PHY_STAT0 0x0104 -#define HDMI_IH_I2CM_STAT0 0x0105 -#define HDMI_IH_CEC_STAT0 0x0106 -#define HDMI_IH_VP_STAT0 0x0107 -#define HDMI_IH_I2CMPHY_STAT0 0x0108 -#define HDMI_IH_AHBDMAAUD_STAT0 0x0109 - -#define HDMI_IH_MUTE_FC_STAT0 0x0180 -#define HDMI_IH_MUTE_FC_STAT1 0x0181 -#define HDMI_IH_MUTE_FC_STAT2 0x0182 -#define HDMI_IH_MUTE_AS_STAT0 0x0183 -#define HDMI_IH_MUTE_PHY_STAT0 0x0184 -#define HDMI_IH_MUTE_I2CM_STAT0 0x0185 -#define HDMI_IH_MUTE_CEC_STAT0 0x0186 -#define HDMI_IH_MUTE_VP_STAT0 0x0187 -#define HDMI_IH_MUTE_I2CMPHY_STAT0 0x0188 -#define HDMI_IH_MUTE_AHBDMAAUD_STAT0 0x0189 -#define HDMI_IH_MUTE 0x01FF - -/* Video Sample Registers */ -#define HDMI_TX_INVID0 0x0200 -#define HDMI_TX_INSTUFFING 0x0201 -#define HDMI_TX_GYDATA0 0x0202 -#define HDMI_TX_GYDATA1 0x0203 -#define HDMI_TX_RCRDATA0 0x0204 -#define HDMI_TX_RCRDATA1 0x0205 -#define HDMI_TX_BCBDATA0 0x0206 -#define HDMI_TX_BCBDATA1 0x0207 - -/* Video Packetizer Registers */ -#define HDMI_VP_STATUS 0x0800 -#define HDMI_VP_PR_CD 0x0801 -#define HDMI_VP_STUFF 0x0802 -#define HDMI_VP_REMAP 0x0803 -#define HDMI_VP_CONF 0x0804 -#define HDMI_VP_STAT 0x0805 -#define HDMI_VP_INT 0x0806 -#define HDMI_VP_MASK 0x0807 -#define HDMI_VP_POL 0x0808 - -/* Frame Composer Registers */ -#define HDMI_FC_INVIDCONF 0x1000 -#define HDMI_FC_INHACTV0 0x1001 -#define HDMI_FC_INHACTV1 0x1002 -#define HDMI_FC_INHBLANK0 0x1003 -#define HDMI_FC_INHBLANK1 0x1004 -#define HDMI_FC_INVACTV0 0x1005 -#define HDMI_FC_INVACTV1 0x1006 -#define HDMI_FC_INVBLANK 0x1007 -#define HDMI_FC_HSYNCINDELAY0 0x1008 -#define HDMI_FC_HSYNCINDELAY1 0x1009 -#define HDMI_FC_HSYNCINWIDTH0 0x100A -#define HDMI_FC_HSYNCINWIDTH1 0x100B -#define HDMI_FC_VSYNCINDELAY 0x100C -#define HDMI_FC_VSYNCINWIDTH 0x100D -#define HDMI_FC_INFREQ0 0x100E -#define HDMI_FC_INFREQ1 0x100F -#define HDMI_FC_INFREQ2 0x1010 -#define HDMI_FC_CTRLDUR 0x1011 -#define HDMI_FC_EXCTRLDUR 0x1012 -#define HDMI_FC_EXCTRLSPAC 0x1013 -#define HDMI_FC_CH0PREAM 0x1014 -#define HDMI_FC_CH1PREAM 0x1015 -#define HDMI_FC_CH2PREAM 0x1016 -#define HDMI_FC_AVICONF3 0x1017 -#define HDMI_FC_GCP 0x1018 -#define HDMI_FC_AVICONF0 0x1019 -#define HDMI_FC_AVICONF1 0x101A -#define HDMI_FC_AVICONF2 0x101B -#define HDMI_FC_AVIVID 0x101C -#define HDMI_FC_AVIETB0 0x101D -#define HDMI_FC_AVIETB1 0x101E -#define HDMI_FC_AVISBB0 0x101F -#define HDMI_FC_AVISBB1 0x1020 -#define HDMI_FC_AVIELB0 0x1021 -#define HDMI_FC_AVIELB1 0x1022 -#define HDMI_FC_AVISRB0 0x1023 -#define HDMI_FC_AVISRB1 0x1024 -#define HDMI_FC_AUDICONF0 0x1025 -#define HDMI_FC_AUDICONF1 0x1026 -#define HDMI_FC_AUDICONF2 0x1027 -#define HDMI_FC_AUDICONF3 0x1028 -#define HDMI_FC_VSDIEEEID0 0x1029 -#define HDMI_FC_VSDSIZE 0x102A -#define HDMI_FC_VSDIEEEID1 0x1030 -#define HDMI_FC_VSDIEEEID2 0x1031 -#define HDMI_FC_VSDPAYLOAD0 0x1032 -#define HDMI_FC_VSDPAYLOAD1 0x1033 -#define HDMI_FC_VSDPAYLOAD2 0x1034 -#define HDMI_FC_VSDPAYLOAD3 0x1035 -#define HDMI_FC_VSDPAYLOAD4 0x1036 -#define HDMI_FC_VSDPAYLOAD5 0x1037 -#define HDMI_FC_VSDPAYLOAD6 0x1038 -#define HDMI_FC_VSDPAYLOAD7 0x1039 -#define HDMI_FC_VSDPAYLOAD8 0x103A -#define HDMI_FC_VSDPAYLOAD9 0x103B -#define HDMI_FC_VSDPAYLOAD10 0x103C -#define HDMI_FC_VSDPAYLOAD11 0x103D -#define HDMI_FC_VSDPAYLOAD12 0x103E -#define HDMI_FC_VSDPAYLOAD13 0x103F -#define HDMI_FC_VSDPAYLOAD14 0x1040 -#define HDMI_FC_VSDPAYLOAD15 0x1041 -#define HDMI_FC_VSDPAYLOAD16 0x1042 -#define HDMI_FC_VSDPAYLOAD17 0x1043 -#define HDMI_FC_VSDPAYLOAD18 0x1044 -#define HDMI_FC_VSDPAYLOAD19 0x1045 -#define HDMI_FC_VSDPAYLOAD20 0x1046 -#define HDMI_FC_VSDPAYLOAD21 0x1047 -#define HDMI_FC_VSDPAYLOAD22 0x1048 -#define HDMI_FC_VSDPAYLOAD23 0x1049 -#define HDMI_FC_SPDVENDORNAME0 0x104A -#define HDMI_FC_SPDVENDORNAME1 0x104B -#define HDMI_FC_SPDVENDORNAME2 0x104C -#define HDMI_FC_SPDVENDORNAME3 0x104D -#define HDMI_FC_SPDVENDORNAME4 0x104E -#define HDMI_FC_SPDVENDORNAME5 0x104F -#define HDMI_FC_SPDVENDORNAME6 0x1050 -#define HDMI_FC_SPDVENDORNAME7 0x1051 -#define HDMI_FC_SDPPRODUCTNAME0 0x1052 -#define HDMI_FC_SDPPRODUCTNAME1 0x1053 -#define HDMI_FC_SDPPRODUCTNAME2 0x1054 -#define HDMI_FC_SDPPRODUCTNAME3 0x1055 -#define HDMI_FC_SDPPRODUCTNAME4 0x1056 -#define HDMI_FC_SDPPRODUCTNAME5 0x1057 -#define HDMI_FC_SDPPRODUCTNAME6 0x1058 -#define HDMI_FC_SDPPRODUCTNAME7 0x1059 -#define HDMI_FC_SDPPRODUCTNAME8 0x105A -#define HDMI_FC_SDPPRODUCTNAME9 0x105B -#define HDMI_FC_SDPPRODUCTNAME10 0x105C -#define HDMI_FC_SDPPRODUCTNAME11 0x105D -#define HDMI_FC_SDPPRODUCTNAME12 0x105E -#define HDMI_FC_SDPPRODUCTNAME13 0x105F -#define HDMI_FC_SDPPRODUCTNAME14 0x1060 -#define HDMI_FC_SPDPRODUCTNAME15 0x1061 -#define HDMI_FC_SPDDEVICEINF 0x1062 -#define HDMI_FC_AUDSCONF 0x1063 -#define HDMI_FC_AUDSSTAT 0x1064 -#define HDMI_FC_DATACH0FILL 0x1070 -#define HDMI_FC_DATACH1FILL 0x1071 -#define HDMI_FC_DATACH2FILL 0x1072 -#define HDMI_FC_CTRLQHIGH 0x1073 -#define HDMI_FC_CTRLQLOW 0x1074 -#define HDMI_FC_ACP0 0x1075 -#define HDMI_FC_ACP28 0x1076 -#define HDMI_FC_ACP27 0x1077 -#define HDMI_FC_ACP26 0x1078 -#define HDMI_FC_ACP25 0x1079 -#define HDMI_FC_ACP24 0x107A -#define HDMI_FC_ACP23 0x107B -#define HDMI_FC_ACP22 0x107C -#define HDMI_FC_ACP21 0x107D -#define HDMI_FC_ACP20 0x107E -#define HDMI_FC_ACP19 0x107F -#define HDMI_FC_ACP18 0x1080 -#define HDMI_FC_ACP17 0x1081 -#define HDMI_FC_ACP16 0x1082 -#define HDMI_FC_ACP15 0x1083 -#define HDMI_FC_ACP14 0x1084 -#define HDMI_FC_ACP13 0x1085 -#define HDMI_FC_ACP12 0x1086 -#define HDMI_FC_ACP11 0x1087 -#define HDMI_FC_ACP10 0x1088 -#define HDMI_FC_ACP9 0x1089 -#define HDMI_FC_ACP8 0x108A -#define HDMI_FC_ACP7 0x108B -#define HDMI_FC_ACP6 0x108C -#define HDMI_FC_ACP5 0x108D -#define HDMI_FC_ACP4 0x108E -#define HDMI_FC_ACP3 0x108F -#define HDMI_FC_ACP2 0x1090 -#define HDMI_FC_ACP1 0x1091 -#define HDMI_FC_ISCR1_0 0x1092 -#define HDMI_FC_ISCR1_16 0x1093 -#define HDMI_FC_ISCR1_15 0x1094 -#define HDMI_FC_ISCR1_14 0x1095 -#define HDMI_FC_ISCR1_13 0x1096 -#define HDMI_FC_ISCR1_12 0x1097 -#define HDMI_FC_ISCR1_11 0x1098 -#define HDMI_FC_ISCR1_10 0x1099 -#define HDMI_FC_ISCR1_9 0x109A -#define HDMI_FC_ISCR1_8 0x109B -#define HDMI_FC_ISCR1_7 0x109C -#define HDMI_FC_ISCR1_6 0x109D -#define HDMI_FC_ISCR1_5 0x109E -#define HDMI_FC_ISCR1_4 0x109F -#define HDMI_FC_ISCR1_3 0x10A0 -#define HDMI_FC_ISCR1_2 0x10A1 -#define HDMI_FC_ISCR1_1 0x10A2 -#define HDMI_FC_ISCR2_15 0x10A3 -#define HDMI_FC_ISCR2_14 0x10A4 -#define HDMI_FC_ISCR2_13 0x10A5 -#define HDMI_FC_ISCR2_12 0x10A6 -#define HDMI_FC_ISCR2_11 0x10A7 -#define HDMI_FC_ISCR2_10 0x10A8 -#define HDMI_FC_ISCR2_9 0x10A9 -#define HDMI_FC_ISCR2_8 0x10AA -#define HDMI_FC_ISCR2_7 0x10AB -#define HDMI_FC_ISCR2_6 0x10AC -#define HDMI_FC_ISCR2_5 0x10AD -#define HDMI_FC_ISCR2_4 0x10AE -#define HDMI_FC_ISCR2_3 0x10AF -#define HDMI_FC_ISCR2_2 0x10B0 -#define HDMI_FC_ISCR2_1 0x10B1 -#define HDMI_FC_ISCR2_0 0x10B2 -#define HDMI_FC_DATAUTO0 0x10B3 -#define HDMI_FC_DATAUTO1 0x10B4 -#define HDMI_FC_DATAUTO2 0x10B5 -#define HDMI_FC_DATMAN 0x10B6 -#define HDMI_FC_DATAUTO3 0x10B7 -#define HDMI_FC_RDRB0 0x10B8 -#define HDMI_FC_RDRB1 0x10B9 -#define HDMI_FC_RDRB2 0x10BA -#define HDMI_FC_RDRB3 0x10BB -#define HDMI_FC_RDRB4 0x10BC -#define HDMI_FC_RDRB5 0x10BD -#define HDMI_FC_RDRB6 0x10BE -#define HDMI_FC_RDRB7 0x10BF -#define HDMI_FC_STAT0 0x10D0 -#define HDMI_FC_INT0 0x10D1 -#define HDMI_FC_MASK0 0x10D2 -#define HDMI_FC_POL0 0x10D3 -#define HDMI_FC_STAT1 0x10D4 -#define HDMI_FC_INT1 0x10D5 -#define HDMI_FC_MASK1 0x10D6 -#define HDMI_FC_POL1 0x10D7 -#define HDMI_FC_STAT2 0x10D8 -#define HDMI_FC_INT2 0x10D9 -#define HDMI_FC_MASK2 0x10DA -#define HDMI_FC_POL2 0x10DB -#define HDMI_FC_PRCONF 0x10E0 - -#define HDMI_FC_GMD_STAT 0x1100 -#define HDMI_FC_GMD_EN 0x1101 -#define HDMI_FC_GMD_UP 0x1102 -#define HDMI_FC_GMD_CONF 0x1103 -#define HDMI_FC_GMD_HB 0x1104 -#define HDMI_FC_GMD_PB0 0x1105 -#define HDMI_FC_GMD_PB1 0x1106 -#define HDMI_FC_GMD_PB2 0x1107 -#define HDMI_FC_GMD_PB3 0x1108 -#define HDMI_FC_GMD_PB4 0x1109 -#define HDMI_FC_GMD_PB5 0x110A -#define HDMI_FC_GMD_PB6 0x110B -#define HDMI_FC_GMD_PB7 0x110C -#define HDMI_FC_GMD_PB8 0x110D -#define HDMI_FC_GMD_PB9 0x110E -#define HDMI_FC_GMD_PB10 0x110F -#define HDMI_FC_GMD_PB11 0x1110 -#define HDMI_FC_GMD_PB12 0x1111 -#define HDMI_FC_GMD_PB13 0x1112 -#define HDMI_FC_GMD_PB14 0x1113 -#define HDMI_FC_GMD_PB15 0x1114 -#define HDMI_FC_GMD_PB16 0x1115 -#define HDMI_FC_GMD_PB17 0x1116 -#define HDMI_FC_GMD_PB18 0x1117 -#define HDMI_FC_GMD_PB19 0x1118 -#define HDMI_FC_GMD_PB20 0x1119 -#define HDMI_FC_GMD_PB21 0x111A -#define HDMI_FC_GMD_PB22 0x111B -#define HDMI_FC_GMD_PB23 0x111C -#define HDMI_FC_GMD_PB24 0x111D -#define HDMI_FC_GMD_PB25 0x111E -#define HDMI_FC_GMD_PB26 0x111F -#define HDMI_FC_GMD_PB27 0x1120 - -#define HDMI_FC_DBGFORCE 0x1200 -#define HDMI_FC_DBGAUD0CH0 0x1201 -#define HDMI_FC_DBGAUD1CH0 0x1202 -#define HDMI_FC_DBGAUD2CH0 0x1203 -#define HDMI_FC_DBGAUD0CH1 0x1204 -#define HDMI_FC_DBGAUD1CH1 0x1205 -#define HDMI_FC_DBGAUD2CH1 0x1206 -#define HDMI_FC_DBGAUD0CH2 0x1207 -#define HDMI_FC_DBGAUD1CH2 0x1208 -#define HDMI_FC_DBGAUD2CH2 0x1209 -#define HDMI_FC_DBGAUD0CH3 0x120A -#define HDMI_FC_DBGAUD1CH3 0x120B -#define HDMI_FC_DBGAUD2CH3 0x120C -#define HDMI_FC_DBGAUD0CH4 0x120D -#define HDMI_FC_DBGAUD1CH4 0x120E -#define HDMI_FC_DBGAUD2CH4 0x120F -#define HDMI_FC_DBGAUD0CH5 0x1210 -#define HDMI_FC_DBGAUD1CH5 0x1211 -#define HDMI_FC_DBGAUD2CH5 0x1212 -#define HDMI_FC_DBGAUD0CH6 0x1213 -#define HDMI_FC_DBGAUD1CH6 0x1214 -#define HDMI_FC_DBGAUD2CH6 0x1215 -#define HDMI_FC_DBGAUD0CH7 0x1216 -#define HDMI_FC_DBGAUD1CH7 0x1217 -#define HDMI_FC_DBGAUD2CH7 0x1218 -#define HDMI_FC_DBGTMDS0 0x1219 -#define HDMI_FC_DBGTMDS1 0x121A -#define HDMI_FC_DBGTMDS2 0x121B - -/* HDMI Source PHY Registers */ -#define HDMI_PHY_CONF0 0x3000 -#define HDMI_PHY_TST0 0x3001 -#define HDMI_PHY_TST1 0x3002 -#define HDMI_PHY_TST2 0x3003 -#define HDMI_PHY_STAT0 0x3004 -#define HDMI_PHY_INT0 0x3005 -#define HDMI_PHY_MASK0 0x3006 -#define HDMI_PHY_POL0 0x3007 - -/* HDMI Master PHY Registers */ -#define HDMI_PHY_I2CM_SLAVE_ADDR 0x3020 -#define HDMI_PHY_I2CM_ADDRESS_ADDR 0x3021 -#define HDMI_PHY_I2CM_DATAO_1_ADDR 0x3022 -#define HDMI_PHY_I2CM_DATAO_0_ADDR 0x3023 -#define HDMI_PHY_I2CM_DATAI_1_ADDR 0x3024 -#define HDMI_PHY_I2CM_DATAI_0_ADDR 0x3025 -#define HDMI_PHY_I2CM_OPERATION_ADDR 0x3026 -#define HDMI_PHY_I2CM_INT_ADDR 0x3027 -#define HDMI_PHY_I2CM_CTLINT_ADDR 0x3028 -#define HDMI_PHY_I2CM_DIV_ADDR 0x3029 -#define HDMI_PHY_I2CM_SOFTRSTZ_ADDR 0x302a -#define HDMI_PHY_I2CM_SS_SCL_HCNT_1_ADDR 0x302b -#define HDMI_PHY_I2CM_SS_SCL_HCNT_0_ADDR 0x302c -#define HDMI_PHY_I2CM_SS_SCL_LCNT_1_ADDR 0x302d -#define HDMI_PHY_I2CM_SS_SCL_LCNT_0_ADDR 0x302e -#define HDMI_PHY_I2CM_FS_SCL_HCNT_1_ADDR 0x302f -#define HDMI_PHY_I2CM_FS_SCL_HCNT_0_ADDR 0x3030 -#define HDMI_PHY_I2CM_FS_SCL_LCNT_1_ADDR 0x3031 -#define HDMI_PHY_I2CM_FS_SCL_LCNT_0_ADDR 0x3032 - -/* Audio Sampler Registers */ -#define HDMI_AUD_CONF0 0x3100 -#define HDMI_AUD_CONF1 0x3101 -#define HDMI_AUD_INT 0x3102 -#define HDMI_AUD_CONF2 0x3103 -#define HDMI_AUD_N1 0x3200 -#define HDMI_AUD_N2 0x3201 -#define HDMI_AUD_N3 0x3202 -#define HDMI_AUD_CTS1 0x3203 -#define HDMI_AUD_CTS2 0x3204 -#define HDMI_AUD_CTS3 0x3205 -#define HDMI_AUD_INPUTCLKFS 0x3206 -#define HDMI_AUD_SPDIFINT 0x3302 -#define HDMI_AUD_CONF0_HBR 0x3400 -#define HDMI_AUD_HBR_STATUS 0x3401 -#define HDMI_AUD_HBR_INT 0x3402 -#define HDMI_AUD_HBR_POL 0x3403 -#define HDMI_AUD_HBR_MASK 0x3404 - -/* Generic Parallel Audio Interface Registers */ -/* Not used as GPAUD interface is not enabled in hw */ -#define HDMI_GP_CONF0 0x3500 -#define HDMI_GP_CONF1 0x3501 -#define HDMI_GP_CONF2 0x3502 -#define HDMI_GP_STAT 0x3503 -#define HDMI_GP_INT 0x3504 -#define HDMI_GP_MASK 0x3505 -#define HDMI_GP_POL 0x3506 - -/* Audio DMA Registers */ -#define HDMI_AHB_DMA_CONF0 0x3600 -#define HDMI_AHB_DMA_START 0x3601 -#define HDMI_AHB_DMA_STOP 0x3602 -#define HDMI_AHB_DMA_THRSLD 0x3603 -#define HDMI_AHB_DMA_STRADDR0 0x3604 -#define HDMI_AHB_DMA_STRADDR1 0x3605 -#define HDMI_AHB_DMA_STRADDR2 0x3606 -#define HDMI_AHB_DMA_STRADDR3 0x3607 -#define HDMI_AHB_DMA_STPADDR0 0x3608 -#define HDMI_AHB_DMA_STPADDR1 0x3609 -#define HDMI_AHB_DMA_STPADDR2 0x360a -#define HDMI_AHB_DMA_STPADDR3 0x360b -#define HDMI_AHB_DMA_BSTADDR0 0x360c -#define HDMI_AHB_DMA_BSTADDR1 0x360d -#define HDMI_AHB_DMA_BSTADDR2 0x360e -#define HDMI_AHB_DMA_BSTADDR3 0x360f -#define HDMI_AHB_DMA_MBLENGTH0 0x3610 -#define HDMI_AHB_DMA_MBLENGTH1 0x3611 -#define HDMI_AHB_DMA_STAT 0x3612 -#define HDMI_AHB_DMA_INT 0x3613 -#define HDMI_AHB_DMA_MASK 0x3614 -#define HDMI_AHB_DMA_POL 0x3615 -#define HDMI_AHB_DMA_CONF1 0x3616 -#define HDMI_AHB_DMA_BUFFSTAT 0x3617 -#define HDMI_AHB_DMA_BUFFINT 0x3618 -#define HDMI_AHB_DMA_BUFFMASK 0x3619 -#define HDMI_AHB_DMA_BUFFPOL 0x361a - -/* Main Controller Registers */ -#define HDMI_MC_SFRDIV 0x4000 -#define HDMI_MC_CLKDIS 0x4001 -#define HDMI_MC_SWRSTZ 0x4002 -#define HDMI_MC_OPCTRL 0x4003 -#define HDMI_MC_FLOWCTRL 0x4004 -#define HDMI_MC_PHYRSTZ 0x4005 -#define HDMI_MC_LOCKONCLOCK 0x4006 -#define HDMI_MC_HEACPHY_RST 0x4007 - -/* Color Space Converter Registers */ -#define HDMI_CSC_CFG 0x4100 -#define HDMI_CSC_SCALE 0x4101 -#define HDMI_CSC_COEF_A1_MSB 0x4102 -#define HDMI_CSC_COEF_A1_LSB 0x4103 -#define HDMI_CSC_COEF_A2_MSB 0x4104 -#define HDMI_CSC_COEF_A2_LSB 0x4105 -#define HDMI_CSC_COEF_A3_MSB 0x4106 -#define HDMI_CSC_COEF_A3_LSB 0x4107 -#define HDMI_CSC_COEF_A4_MSB 0x4108 -#define HDMI_CSC_COEF_A4_LSB 0x4109 -#define HDMI_CSC_COEF_B1_MSB 0x410A -#define HDMI_CSC_COEF_B1_LSB 0x410B -#define HDMI_CSC_COEF_B2_MSB 0x410C -#define HDMI_CSC_COEF_B2_LSB 0x410D -#define HDMI_CSC_COEF_B3_MSB 0x410E -#define HDMI_CSC_COEF_B3_LSB 0x410F -#define HDMI_CSC_COEF_B4_MSB 0x4110 -#define HDMI_CSC_COEF_B4_LSB 0x4111 -#define HDMI_CSC_COEF_C1_MSB 0x4112 -#define HDMI_CSC_COEF_C1_LSB 0x4113 -#define HDMI_CSC_COEF_C2_MSB 0x4114 -#define HDMI_CSC_COEF_C2_LSB 0x4115 -#define HDMI_CSC_COEF_C3_MSB 0x4116 -#define HDMI_CSC_COEF_C3_LSB 0x4117 -#define HDMI_CSC_COEF_C4_MSB 0x4118 -#define HDMI_CSC_COEF_C4_LSB 0x4119 - -/* HDCP Encryption Engine Registers */ -#define HDMI_A_HDCPCFG0 0x5000 -#define HDMI_A_HDCPCFG1 0x5001 -#define HDMI_A_HDCPOBS0 0x5002 -#define HDMI_A_HDCPOBS1 0x5003 -#define HDMI_A_HDCPOBS2 0x5004 -#define HDMI_A_HDCPOBS3 0x5005 -#define HDMI_A_APIINTCLR 0x5006 -#define HDMI_A_APIINTSTAT 0x5007 -#define HDMI_A_APIINTMSK 0x5008 -#define HDMI_A_VIDPOLCFG 0x5009 -#define HDMI_A_OESSWCFG 0x500A -#define HDMI_A_TIMER1SETUP0 0x500B -#define HDMI_A_TIMER1SETUP1 0x500C -#define HDMI_A_TIMER2SETUP0 0x500D -#define HDMI_A_TIMER2SETUP1 0x500E -#define HDMI_A_100MSCFG 0x500F -#define HDMI_A_2SCFG0 0x5010 -#define HDMI_A_2SCFG1 0x5011 -#define HDMI_A_5SCFG0 0x5012 -#define HDMI_A_5SCFG1 0x5013 -#define HDMI_A_SRMVERLSB 0x5014 -#define HDMI_A_SRMVERMSB 0x5015 -#define HDMI_A_SRMCTRL 0x5016 -#define HDMI_A_SFRSETUP 0x5017 -#define HDMI_A_I2CHSETUP 0x5018 -#define HDMI_A_INTSETUP 0x5019 -#define HDMI_A_PRESETUP 0x501A -#define HDMI_A_SRM_BASE 0x5020 - -/* CEC Engine Registers */ -#define HDMI_CEC_CTRL 0x7D00 -#define HDMI_CEC_STAT 0x7D01 -#define HDMI_CEC_MASK 0x7D02 -#define HDMI_CEC_POLARITY 0x7D03 -#define HDMI_CEC_INT 0x7D04 -#define HDMI_CEC_ADDR_L 0x7D05 -#define HDMI_CEC_ADDR_H 0x7D06 -#define HDMI_CEC_TX_CNT 0x7D07 -#define HDMI_CEC_RX_CNT 0x7D08 -#define HDMI_CEC_TX_DATA0 0x7D10 -#define HDMI_CEC_TX_DATA1 0x7D11 -#define HDMI_CEC_TX_DATA2 0x7D12 -#define HDMI_CEC_TX_DATA3 0x7D13 -#define HDMI_CEC_TX_DATA4 0x7D14 -#define HDMI_CEC_TX_DATA5 0x7D15 -#define HDMI_CEC_TX_DATA6 0x7D16 -#define HDMI_CEC_TX_DATA7 0x7D17 -#define HDMI_CEC_TX_DATA8 0x7D18 -#define HDMI_CEC_TX_DATA9 0x7D19 -#define HDMI_CEC_TX_DATA10 0x7D1a -#define HDMI_CEC_TX_DATA11 0x7D1b -#define HDMI_CEC_TX_DATA12 0x7D1c -#define HDMI_CEC_TX_DATA13 0x7D1d -#define HDMI_CEC_TX_DATA14 0x7D1e -#define HDMI_CEC_TX_DATA15 0x7D1f -#define HDMI_CEC_RX_DATA0 0x7D20 -#define HDMI_CEC_RX_DATA1 0x7D21 -#define HDMI_CEC_RX_DATA2 0x7D22 -#define HDMI_CEC_RX_DATA3 0x7D23 -#define HDMI_CEC_RX_DATA4 0x7D24 -#define HDMI_CEC_RX_DATA5 0x7D25 -#define HDMI_CEC_RX_DATA6 0x7D26 -#define HDMI_CEC_RX_DATA7 0x7D27 -#define HDMI_CEC_RX_DATA8 0x7D28 -#define HDMI_CEC_RX_DATA9 0x7D29 -#define HDMI_CEC_RX_DATA10 0x7D2a -#define HDMI_CEC_RX_DATA11 0x7D2b -#define HDMI_CEC_RX_DATA12 0x7D2c -#define HDMI_CEC_RX_DATA13 0x7D2d -#define HDMI_CEC_RX_DATA14 0x7D2e -#define HDMI_CEC_RX_DATA15 0x7D2f -#define HDMI_CEC_LOCK 0x7D30 -#define HDMI_CEC_WKUPCTRL 0x7D31 - -/* I2C Master Registers (E-DDC) */ -#define HDMI_I2CM_SLAVE 0x7E00 -#define HDMI_I2CMESS 0x7E01 -#define HDMI_I2CM_DATAO 0x7E02 -#define HDMI_I2CM_DATAI 0x7E03 -#define HDMI_I2CM_OPERATION 0x7E04 -#define HDMI_I2CM_INT 0x7E05 -#define HDMI_I2CM_CTLINT 0x7E06 -#define HDMI_I2CM_DIV 0x7E07 -#define HDMI_I2CM_SEGADDR 0x7E08 -#define HDMI_I2CM_SOFTRSTZ 0x7E09 -#define HDMI_I2CM_SEGPTR 0x7E0A -#define HDMI_I2CM_SS_SCL_HCNT_1_ADDR 0x7E0B -#define HDMI_I2CM_SS_SCL_HCNT_0_ADDR 0x7E0C -#define HDMI_I2CM_SS_SCL_LCNT_1_ADDR 0x7E0D -#define HDMI_I2CM_SS_SCL_LCNT_0_ADDR 0x7E0E -#define HDMI_I2CM_FS_SCL_HCNT_1_ADDR 0x7E0F -#define HDMI_I2CM_FS_SCL_HCNT_0_ADDR 0x7E10 -#define HDMI_I2CM_FS_SCL_LCNT_1_ADDR 0x7E11 -#define HDMI_I2CM_FS_SCL_LCNT_0_ADDR 0x7E12 - -/* Random Number Generator Registers (RNG) */ -#define HDMI_RNG_BASE 0x8000 - +struct hdmi_regs { + /*Identification Registers */ + u8 design_id; /* 0x000 */ + u8 revision_id; /* 0x001 */ + u8 product_id0; /* 0x002 */ + u8 product_id1; /* 0x003 */ + u8 config0_id; /* 0x004 */ + u8 config1_id; /* 0x005 */ + u8 config2_id; /* 0x006 */ + u8 config3_id; /* 0x007 */ + u8 reserved1[0xf8]; + /* Interrupt Registers */ + u8 ih_fc_stat0; /* 0x100 */ + u8 ih_fc_stat1; /* 0x101 */ + u8 ih_fc_stat2; /* 0x102 */ + u8 ih_as_stat0; /* 0x103 */ + u8 ih_phy_stat0; /* 0x104 */ + u8 ih_i2cm_stat0; /* 0x105 */ + u8 ih_cec_stat0; /* 0x106 */ + u8 ih_vp_stat0; /* 0x107 */ + u8 ih_i2cmphy_stat0; /* 0x108 */ + u8 ih_ahbdmaaud_stat0; /* 0x109 */ + u8 reserved2[0x76]; + u8 ih_mute_fc_stat0; /* 0x180 */ + u8 ih_mute_fc_stat1; /* 0x181 */ + u8 ih_mute_fc_stat2; /* 0x182 */ + u8 ih_mute_as_stat0; /* 0x183 */ + u8 ih_mute_phy_stat0; /* 0x184 */ + u8 ih_mute_i2cm_stat0; /* 0x185 */ + u8 ih_mute_cec_stat0; /* 0x186 */ + u8 ih_mute_vp_stat0; /* 0x187 */ + u8 ih_mute_i2cmphy_stat0; /* 0x188 */ + u8 ih_mute_ahbdmaaud_stat0; /* 0x189 */ + u8 reserved3[0x75]; + u8 ih_mute; /* 0x1ff */ + /* Video Sample Registers */ + u8 tx_invid0; /* 0x200 */ + u8 tx_instuffing; /* 0x201 */ + u8 tx_gydata0; /* 0x202 */ + u8 tx_gydata1; /* 0x203 */ + u8 tx_rcrdata0; /* 0x204 */ + u8 tx_rcrdata1; /* 0x205 */ + u8 tx_bcbdata0; /* 0x206 */ + u8 tx_bcbdata1; /* 0x207 */ + u8 reserved4[0x5f8]; + /* Video Packetizer Registers */ + u8 vp_status; /* 0x800 */ + u8 vp_pr_cd; /* 0x801 */ + u8 vp_stuff; /* 0x802 */ + u8 vp_remap; /* 0x803 */ + u8 vp_conf; /* 0x804 */ + u8 vp_stat; /* 0x805 */ + u8 vp_int; /* 0x806 */ + u8 vp_mask; /* 0x807 */ + u8 vp_pol; /* 0x808 */ + u8 reserved5[0x7f7]; + /* Frame Composer Registers */ + u8 fc_invidconf; /* 0x1000 */ + u8 fc_inhactv0; /* 0x1001 */ + u8 fc_inhactv1; /* 0x1002 */ + u8 fc_inhblank0; /* 0x1003 */ + u8 fc_inhblank1; /* 0x1004 */ + u8 fc_invactv0; /* 0x1005 */ + u8 fc_invactv1; /* 0x1006 */ + u8 fc_invblank; /* 0x1007 */ + u8 fc_hsyncindelay0; /* 0x1008 */ + u8 fc_hsyncindelay1; /* 0x1009 */ + u8 fc_hsyncinwidth0; /* 0x100a */ + u8 fc_hsyncinwidth1; /* 0x100b */ + u8 fc_vsyncindelay; /* 0x100c */ + u8 fc_vsyncinwidth; /* 0x100d */ + u8 fc_infreq0; /* 0x100e */ + u8 fc_infreq1; /* 0x100f */ + u8 fc_infreq2; /* 0x1010 */ + u8 fc_ctrldur; /* 0x1011 */ + u8 fc_exctrldur; /* 0x1012 */ + u8 fc_exctrlspac; /* 0x1013 */ + u8 fc_ch0pream; /* 0x1014 */ + u8 fc_ch1pream; /* 0x1015 */ + u8 fc_ch2pream; /* 0x1016 */ + u8 fc_aviconf3; /* 0x1017 */ + u8 fc_gcp; /* 0x1018 */ + u8 fc_aviconf0; /* 0x1019 */ + u8 fc_aviconf1; /* 0x101a */ + u8 fc_aviconf2; /* 0x101b */ + u8 fc_avivid; /* 0x101c */ + u8 fc_avietb0; /* 0x101d */ + u8 fc_avietb1; /* 0x101e */ + u8 fc_avisbb0; /* 0x101f */ + u8 fc_avisbb1; /* 0x1020 */ + u8 fc_avielb0; /* 0x1021 */ + u8 fc_avielb1; /* 0x1022 */ + u8 fc_avisrb0; /* 0x1023 */ + u8 fc_avisrb1; /* 0x1024 */ + u8 fc_audiconf0; /* 0x1025 */ + u8 fc_audiconf1; /* 0x1026 */ + u8 fc_audiconf2; /* 0x1027 */ + u8 fc_audiconf3; /* 0x1028 */ + u8 fc_vsdieeeid0; /* 0x1029 */ + u8 fc_vsdsize; /* 0x102a */ + u8 reserved6[5]; + u8 fc_vsdieeeid1; /* 0x1030 */ + u8 fc_vsdieeeid2; /* 0x1031 */ + u8 fc_vsdpayload0; /* 0x1032 */ + u8 fc_vsdpayload1; /* 0x1033 */ + u8 fc_vsdpayload2; /* 0x1034 */ + u8 fc_vsdpayload3; /* 0x1035 */ + u8 fc_vsdpayload4; /* 0x1036 */ + u8 fc_vsdpayload5; /* 0x1037 */ + u8 fc_vsdpayload6; /* 0x1038 */ + u8 fc_vsdpayload7; /* 0x1039 */ + u8 fc_vsdpayload8; /* 0x103a */ + u8 fc_vsdpayload9; /* 0x103b */ + u8 fc_vsdpayload10; /* 0x103c */ + u8 fc_vsdpayload11; /* 0x103d */ + u8 fc_vsdpayload12; /* 0x103e */ + u8 fc_vsdpayload13; /* 0x103f */ + u8 fc_vsdpayload14; /* 0x1040 */ + u8 fc_vsdpayload15; /* 0x1041 */ + u8 fc_vsdpayload16; /* 0x1042 */ + u8 fc_vsdpayload17; /* 0x1043 */ + u8 fc_vsdpayload18; /* 0x1044 */ + u8 fc_vsdpayload19; /* 0x1045 */ + u8 fc_vsdpayload20; /* 0x1046 */ + u8 fc_vsdpayload21; /* 0x1047 */ + u8 fc_vsdpayload22; /* 0x1048 */ + u8 fc_vsdpayload23; /* 0x1049 */ + u8 fc_spdvendorname0; /* 0x104a */ + u8 fc_spdvendorname1; /* 0x104b */ + u8 fc_spdvendorname2; /* 0x104c */ + u8 fc_spdvendorname3; /* 0x104d */ + u8 fc_spdvendorname4; /* 0x104e */ + u8 fc_spdvendorname5; /* 0x104f */ + u8 fc_spdvendorname6; /* 0x1050 */ + u8 fc_spdvendorname7; /* 0x1051 */ + u8 fc_sdpproductname0; /* 0x1052 */ + u8 fc_sdpproductname1; /* 0x1053 */ + u8 fc_sdpproductname2; /* 0x1054 */ + u8 fc_sdpproductname3; /* 0x1055 */ + u8 fc_sdpproductname4; /* 0x1056 */ + u8 fc_sdpproductname5; /* 0x1057 */ + u8 fc_sdpproductname6; /* 0x1058 */ + u8 fc_sdpproductname7; /* 0x1059 */ + u8 fc_sdpproductname8; /* 0x105a */ + u8 fc_sdpproductname9; /* 0x105b */ + u8 fc_sdpproductname10; /* 0x105c */ + u8 fc_sdpproductname11; /* 0x105d */ + u8 fc_sdpproductname12; /* 0x105e */ + u8 fc_sdpproductname13; /* 0x105f */ + u8 fc_sdpproductname14; /* 0x1060 */ + u8 fc_spdproductname15; /* 0x1061 */ + u8 fc_spddeviceinf; /* 0x1062 */ + u8 fc_audsconf; /* 0x1063 */ + u8 fc_audsstat; /* 0x1064 */ + u8 reserved7[0xb]; + u8 fc_datach0fill; /* 0x1070 */ + u8 fc_datach1fill; /* 0x1071 */ + u8 fc_datach2fill; /* 0x1072 */ + u8 fc_ctrlqhigh; /* 0x1073 */ + u8 fc_ctrlqlow; /* 0x1074 */ + u8 fc_acp0; /* 0x1075 */ + u8 fc_acp28; /* 0x1076 */ + u8 fc_acp27; /* 0x1077 */ + u8 fc_acp26; /* 0x1078 */ + u8 fc_acp25; /* 0x1079 */ + u8 fc_acp24; /* 0x107a */ + u8 fc_acp23; /* 0x107b */ + u8 fc_acp22; /* 0x107c */ + u8 fc_acp21; /* 0x107d */ + u8 fc_acp20; /* 0x107e */ + u8 fc_acp19; /* 0x107f */ + u8 fc_acp18; /* 0x1080 */ + u8 fc_acp17; /* 0x1081 */ + u8 fc_acp16; /* 0x1082 */ + u8 fc_acp15; /* 0x1083 */ + u8 fc_acp14; /* 0x1084 */ + u8 fc_acp13; /* 0x1085 */ + u8 fc_acp12; /* 0x1086 */ + u8 fc_acp11; /* 0x1087 */ + u8 fc_acp10; /* 0x1088 */ + u8 fc_acp9; /* 0x1089 */ + u8 fc_acp8; /* 0x108a */ + u8 fc_acp7; /* 0x108b */ + u8 fc_acp6; /* 0x108c */ + u8 fc_acp5; /* 0x108d */ + u8 fc_acp4; /* 0x108e */ + u8 fc_acp3; /* 0x108f */ + u8 fc_acp2; /* 0x1090 */ + u8 fc_acp1; /* 0x1091 */ + u8 fc_iscr1_0; /* 0x1092 */ + u8 fc_iscr1_16; /* 0x1093 */ + u8 fc_iscr1_15; /* 0x1094 */ + u8 fc_iscr1_14; /* 0x1095 */ + u8 fc_iscr1_13; /* 0x1096 */ + u8 fc_iscr1_12; /* 0x1097 */ + u8 fc_iscr1_11; /* 0x1098 */ + u8 fc_iscr1_10; /* 0x1099 */ + u8 fc_iscr1_9; /* 0x109a */ + u8 fc_iscr1_8; /* 0x109b */ + u8 fc_iscr1_7; /* 0x109c */ + u8 fc_iscr1_6; /* 0x109d */ + u8 fc_iscr1_5; /* 0x109e */ + u8 fc_iscr1_4; /* 0x109f */ + u8 fc_iscr1_3; /* 0x10a0 */ + u8 fc_iscr1_2; /* 0x10a1 */ + u8 fc_iscr1_1; /* 0x10a2 */ + u8 fc_iscr2_15; /* 0x10a3 */ + u8 fc_iscr2_14; /* 0x10a4 */ + u8 fc_iscr2_13; /* 0x10a5 */ + u8 fc_iscr2_12; /* 0x10a6 */ + u8 fc_iscr2_11; /* 0x10a7 */ + u8 fc_iscr2_10; /* 0x10a8 */ + u8 fc_iscr2_9; /* 0x10a9 */ + u8 fc_iscr2_8; /* 0x10aa */ + u8 fc_iscr2_7; /* 0x10ab */ + u8 fc_iscr2_6; /* 0x10ac */ + u8 fc_iscr2_5; /* 0x10ad */ + u8 fc_iscr2_4; /* 0x10ae */ + u8 fc_iscr2_3; /* 0x10af */ + u8 fc_iscr2_2; /* 0x10b0 */ + u8 fc_iscr2_1; /* 0x10b1 */ + u8 fc_iscr2_0; /* 0x10b2 */ + u8 fc_datauto0; /* 0x10b3 */ + u8 fc_datauto1; /* 0x10b4 */ + u8 fc_datauto2; /* 0x10b5 */ + u8 fc_datman; /* 0x10b6 */ + u8 fc_datauto3; /* 0x10b7 */ + u8 fc_rdrb0; /* 0x10b8 */ + u8 fc_rdrb1; /* 0x10b9 */ + u8 fc_rdrb2; /* 0x10ba */ + u8 fc_rdrb3; /* 0x10bb */ + u8 fc_rdrb4; /* 0x10bc */ + u8 fc_rdrb5; /* 0x10bd */ + u8 fc_rdrb6; /* 0x10be */ + u8 fc_rdrb7; /* 0x10bf */ + u8 reserved8[0x10]; + u8 fc_stat0; /* 0x10d0 */ + u8 fc_int0; /* 0x10d1 */ + u8 fc_mask0; /* 0x10d2 */ + u8 fc_pol0; /* 0x10d3 */ + u8 fc_stat1; /* 0x10d4 */ + u8 fc_int1; /* 0x10d5 */ + u8 fc_mask1; /* 0x10d6 */ + u8 fc_pol1; /* 0x10d7 */ + u8 fc_stat2; /* 0x10d8 */ + u8 fc_int2; /* 0x10d9 */ + u8 fc_mask2; /* 0x10da */ + u8 fc_pol2; /* 0x10db */ + u8 reserved9[0x4]; + u8 fc_prconf; /* 0x10e0 */ + u8 reserved10[0x1f]; + u8 fc_gmd_stat; /* 0x1100 */ + u8 fc_gmd_en; /* 0x1101 */ + u8 fc_gmd_up; /* 0x1102 */ + u8 fc_gmd_conf; /* 0x1103 */ + u8 fc_gmd_hb; /* 0x1104 */ + u8 fc_gmd_pb0; /* 0x1105 */ + u8 fc_gmd_pb1; /* 0x1106 */ + u8 fc_gmd_pb2; /* 0x1107 */ + u8 fc_gmd_pb3; /* 0x1108 */ + u8 fc_gmd_pb4; /* 0x1109 */ + u8 fc_gmd_pb5; /* 0x110a */ + u8 fc_gmd_pb6; /* 0x110b */ + u8 fc_gmd_pb7; /* 0x110c */ + u8 fc_gmd_pb8; /* 0x110d */ + u8 fc_gmd_pb9; /* 0x110e */ + u8 fc_gmd_pb10; /* 0x110f */ + u8 fc_gmd_pb11; /* 0x1110 */ + u8 fc_gmd_pb12; /* 0x1111 */ + u8 fc_gmd_pb13; /* 0x1112 */ + u8 fc_gmd_pb14; /* 0x1113 */ + u8 fc_gmd_pb15; /* 0x1114 */ + u8 fc_gmd_pb16; /* 0x1115 */ + u8 fc_gmd_pb17; /* 0x1116 */ + u8 fc_gmd_pb18; /* 0x1117 */ + u8 fc_gmd_pb19; /* 0x1118 */ + u8 fc_gmd_pb20; /* 0x1119 */ + u8 fc_gmd_pb21; /* 0x111a */ + u8 fc_gmd_pb22; /* 0x111b */ + u8 fc_gmd_pb23; /* 0x111c */ + u8 fc_gmd_pb24; /* 0x111d */ + u8 fc_gmd_pb25; /* 0x111e */ + u8 fc_gmd_pb26; /* 0x111f */ + u8 fc_gmd_pb27; /* 0x1120 */ + u8 reserved11[0xdf]; + u8 fc_dbgforce; /* 0x1200 */ + u8 fc_dbgaud0ch0; /* 0x1201 */ + u8 fc_dbgaud1ch0; /* 0x1202 */ + u8 fc_dbgaud2ch0; /* 0x1203 */ + u8 fc_dbgaud0ch1; /* 0x1204 */ + u8 fc_dbgaud1ch1; /* 0x1205 */ + u8 fc_dbgaud2ch1; /* 0x1206 */ + u8 fc_dbgaud0ch2; /* 0x1207 */ + u8 fc_dbgaud1ch2; /* 0x1208 */ + u8 fc_dbgaud2ch2; /* 0x1209 */ + u8 fc_dbgaud0ch3; /* 0x120a */ + u8 fc_dbgaud1ch3; /* 0x120b */ + u8 fc_dbgaud2ch3; /* 0x120c */ + u8 fc_dbgaud0ch4; /* 0x120d */ + u8 fc_dbgaud1ch4; /* 0x120e */ + u8 fc_dbgaud2ch4; /* 0x120f */ + u8 fc_dbgaud0ch5; /* 0x1210 */ + u8 fc_dbgaud1ch5; /* 0x1211 */ + u8 fc_dbgaud2ch5; /* 0x1212 */ + u8 fc_dbgaud0ch6; /* 0x1213 */ + u8 fc_dbgaud1ch6; /* 0x1214 */ + u8 fc_dbgaud2ch6; /* 0x1215 */ + u8 fc_dbgaud0ch7; /* 0x1216 */ + u8 fc_dbgaud1ch7; /* 0x1217 */ + u8 fc_dbgaud2ch7; /* 0x1218 */ + u8 fc_dbgtmds0; /* 0x1219 */ + u8 fc_dbgtmds1; /* 0x121a */ + u8 fc_dbgtmds2; /* 0x121b */ + u8 reserved12[0x1de4]; + /* Hdmi Source Phy Registers */ + u8 phy_conf0; /* 0x3000 */ + u8 phy_tst0; /* 0x3001 */ + u8 phy_tst1; /* 0x3002 */ + u8 phy_tst2; /* 0x3003 */ + u8 phy_stat0; /* 0x3004 */ + u8 phy_int0; /* 0x3005 */ + u8 phy_mask0; /* 0x3006 */ + u8 phy_pol0; /* 0x3007 */ + u8 reserved13[0x18]; + /* Hdmi Master Phy Registers */ + u8 phy_i2cm_slave_addr; /* 0x3020 */ + u8 phy_i2cm_address_addr; /* 0x3021 */ + u8 phy_i2cm_datao_1_addr; /* 0x3022 */ + u8 phy_i2cm_datao_0_addr; /* 0x3023 */ + u8 phy_i2cm_datai_1_addr; /* 0x3024 */ + u8 phy_i2cm_datai_0_addr; /* 0x3025 */ + u8 phy_i2cm_operation_addr; /* 0x3026 */ + u8 phy_i2cm_int_addr; /* 0x3027 */ + u8 phy_i2cm_ctlint_addr; /* 0x3028 */ + u8 phy_i2cm_div_addr; /* 0x3029 */ + u8 phy_i2cm_softrstz_addr; /* 0x302a */ + u8 phy_i2cm_ss_scl_hcnt_1_addr; /* 0x302b */ + u8 phy_i2cm_ss_scl_hcnt_0_addr; /* 0x302c */ + u8 phy_i2cm_ss_scl_lcnt_1_addr; /* 0x302d */ + u8 phy_i2cm_ss_scl_lcnt_0_addr; /* 0x302e */ + u8 phy_i2cm_fs_scl_hcnt_1_addr; /* 0x302f */ + u8 phy_i2cm_fs_scl_hcnt_0_addr; /* 0x3030 */ + u8 phy_i2cm_fs_scl_lcnt_1_addr; /* 0x3031 */ + u8 phy_i2cm_fs_scl_lcnt_0_addr; /* 0x3032 */ + u8 reserved14[0xcd]; + /* Audio Sampler Registers */ + u8 aud_conf0; /* 0x3100 */ + u8 aud_conf1; /* 0x3101 */ + u8 aud_int; /* 0x3102 */ + u8 aud_conf2; /* 0x3103 */ + u8 reserved15[0xfc]; + u8 aud_n1; /* 0x3200 */ + u8 aud_n2; /* 0x3201 */ + u8 aud_n3; /* 0x3202 */ + u8 aud_cts1; /* 0x3203 */ + u8 aud_cts2; /* 0x3204 */ + u8 aud_cts3; /* 0x3205 */ + u8 aud_inputclkfs; /* 0x3206 */ + u8 reserved16[0xfb]; + u8 aud_spdifint; /* 0x3302 */ + u8 reserved17[0xfd]; + u8 aud_conf0_hbr; /* 0x3400 */ + u8 aud_hbr_status; /* 0x3401 */ + u8 aud_hbr_int; /* 0x3402 */ + u8 aud_hbr_pol; /* 0x3403 */ + u8 aud_hbr_mask; /* 0x3404 */ + u8 reserved18[0xfb]; + /* + * Generic Parallel Audio Interface Registers + * Not used as GPAUD interface is not enabled in hw + */ + u8 gp_conf0; /* 0x3500 */ + u8 gp_conf1; /* 0x3501 */ + u8 gp_conf2; /* 0x3502 */ + u8 gp_stat; /* 0x3503 */ + u8 gp_int; /* 0x3504 */ + u8 gp_mask; /* 0x3505 */ + u8 gp_pol; /* 0x3506 */ + u8 reserved19[0xf9]; + /* Audio DMA Registers */ + u8 ahb_dma_conf0; /* 0x3600 */ + u8 ahb_dma_start; /* 0x3601 */ + u8 ahb_dma_stop; /* 0x3602 */ + u8 ahb_dma_thrsld; /* 0x3603 */ + u8 ahb_dma_straddr0; /* 0x3604 */ + u8 ahb_dma_straddr1; /* 0x3605 */ + u8 ahb_dma_straddr2; /* 0x3606 */ + u8 ahb_dma_straddr3; /* 0x3607 */ + u8 ahb_dma_stpaddr0; /* 0x3608 */ + u8 ahb_dma_stpaddr1; /* 0x3609 */ + u8 ahb_dma_stpaddr2; /* 0x360a */ + u8 ahb_dma_stpaddr3; /* 0x360b */ + u8 ahb_dma_bstaddr0; /* 0x360c */ + u8 ahb_dma_bstaddr1; /* 0x360d */ + u8 ahb_dma_bstaddr2; /* 0x360e */ + u8 ahb_dma_bstaddr3; /* 0x360f */ + u8 ahb_dma_mblength0; /* 0x3610 */ + u8 ahb_dma_mblength1; /* 0x3611 */ + u8 ahb_dma_stat; /* 0x3612 */ + u8 ahb_dma_int; /* 0x3613 */ + u8 ahb_dma_mask; /* 0x3614 */ + u8 ahb_dma_pol; /* 0x3615 */ + u8 ahb_dma_conf1; /* 0x3616 */ + u8 ahb_dma_buffstat; /* 0x3617 */ + u8 ahb_dma_buffint; /* 0x3618 */ + u8 ahb_dma_buffmask; /* 0x3619 */ + u8 ahb_dma_buffpol; /* 0x361a */ + u8 reserved20[0x9e5]; + /* Main Controller Registers */ + u8 mc_sfrdiv; /* 0x4000 */ + u8 mc_clkdis; /* 0x4001 */ + u8 mc_swrstz; /* 0x4002 */ + u8 mc_opctrl; /* 0x4003 */ + u8 mc_flowctrl; /* 0x4004 */ + u8 mc_phyrstz; /* 0x4005 */ + u8 mc_lockonclock; /* 0x4006 */ + u8 mc_heacphy_rst; /* 0x4007 */ + u8 reserved21[0xf8]; + /* Colorspace Converter Registers */ + u8 csc_cfg; /* 0x4100 */ + u8 csc_scale; /* 0x4101 */ + u8 csc_coef_a1_msb; /* 0x4102 */ + u8 csc_coef_a1_lsb; /* 0x4103 */ + u8 csc_coef_a2_msb; /* 0x4104 */ + u8 csc_coef_a2_lsb; /* 0x4105 */ + u8 csc_coef_a3_msb; /* 0x4106 */ + u8 csc_coef_a3_lsb; /* 0x4107 */ + u8 csc_coef_a4_msb; /* 0x4108 */ + u8 csc_coef_a4_lsb; /* 0x4109 */ + u8 csc_coef_b1_msb; /* 0x410a */ + u8 csc_coef_b1_lsb; /* 0x410b */ + u8 csc_coef_b2_msb; /* 0x410c */ + u8 csc_coef_b2_lsb; /* 0x410d */ + u8 csc_coef_b3_msb; /* 0x410e */ + u8 csc_coef_b3_lsb; /* 0x410f */ + u8 csc_coef_b4_msb; /* 0x4110 */ + u8 csc_coef_b4_lsb; /* 0x4111 */ + u8 csc_coef_c1_msb; /* 0x4112 */ + u8 csc_coef_c1_lsb; /* 0x4113 */ + u8 csc_coef_c2_msb; /* 0x4114 */ + u8 csc_coef_c2_lsb; /* 0x4115 */ + u8 csc_coef_c3_msb; /* 0x4116 */ + u8 csc_coef_c3_lsb; /* 0x4117 */ + u8 csc_coef_c4_msb; /* 0x4118 */ + u8 csc_coef_c4_lsb; /* 0x4119 */ + u8 reserved22[0xee6]; + /* HDCP Encryption Engine Registers */ + u8 a_hdcpcfg0; /* 0x5000 */ + u8 a_hdcpcfg1; /* 0x5001 */ + u8 a_hdcpobs0; /* 0x5002 */ + u8 a_hdcpobs1; /* 0x5003 */ + u8 a_hdcpobs2; /* 0x5004 */ + u8 a_hdcpobs3; /* 0x5005 */ + u8 a_apiintclr; /* 0x5006 */ + u8 a_apiintstat; /* 0x5007 */ + u8 a_apiintmsk; /* 0x5008 */ + u8 a_vidpolcfg; /* 0x5009 */ + u8 a_oesswcfg; /* 0x500a */ + u8 a_timer1setup0; /* 0x500b */ + u8 a_timer1setup1; /* 0x500c */ + u8 a_timer2setup0; /* 0x500d */ + u8 a_timer2setup1; /* 0x500e */ + u8 a_100mscfg; /* 0x500f */ + u8 a_2scfg0; /* 0x5010 */ + u8 a_2scfg1; /* 0x5011 */ + u8 a_5scfg0; /* 0x5012 */ + u8 a_5scfg1; /* 0x5013 */ + u8 a_srmverlsb; /* 0x5014 */ + u8 a_srmvermsb; /* 0x5015 */ + u8 a_srmctrl; /* 0x5016 */ + u8 a_sfrsetup; /* 0x5017 */ + u8 a_i2chsetup; /* 0x5018 */ + u8 a_intsetup; /* 0x5019 */ + u8 a_presetup; /* 0x501a */ + u8 reserved23[0x5]; + u8 a_srm_base; /* 0x5020 */ + u8 reserved24[0x2cdf]; + /* CEC Engine Registers */ + u8 cec_ctrl; /* 0x7d00 */ + u8 cec_stat; /* 0x7d01 */ + u8 cec_mask; /* 0x7d02 */ + u8 cec_polarity; /* 0x7d03 */ + u8 cec_int; /* 0x7d04 */ + u8 cec_addr_l; /* 0x7d05 */ + u8 cec_addr_h; /* 0x7d06 */ + u8 cec_tx_cnt; /* 0x7d07 */ + u8 cec_rx_cnt; /* 0x7d08 */ + u8 reserved25[0x7]; + u8 cec_tx_data0; /* 0x7d10 */ + u8 cec_tx_data1; /* 0x7d11 */ + u8 cec_tx_data2; /* 0x7d12 */ + u8 cec_tx_data3; /* 0x7d13 */ + u8 cec_tx_data4; /* 0x7d14 */ + u8 cec_tx_data5; /* 0x7d15 */ + u8 cec_tx_data6; /* 0x7d16 */ + u8 cec_tx_data7; /* 0x7d17 */ + u8 cec_tx_data8; /* 0x7d18 */ + u8 cec_tx_data9; /* 0x7d19 */ + u8 cec_tx_data10; /* 0x7d1a */ + u8 cec_tx_data11; /* 0x7d1b */ + u8 cec_tx_data12; /* 0x7d1c */ + u8 cec_tx_data13; /* 0x7d1d */ + u8 cec_tx_data14; /* 0x7d1e */ + u8 cec_tx_data15; /* 0x7d1f */ + u8 cec_rx_data0; /* 0x7d20 */ + u8 cec_rx_data1; /* 0x7d21 */ + u8 cec_rx_data2; /* 0x7d22 */ + u8 cec_rx_data3; /* 0x7d23 */ + u8 cec_rx_data4; /* 0x7d24 */ + u8 cec_rx_data5; /* 0x7d25 */ + u8 cec_rx_data6; /* 0x7d26 */ + u8 cec_rx_data7; /* 0x7d27 */ + u8 cec_rx_data8; /* 0x7d28 */ + u8 cec_rx_data9; /* 0x7d29 */ + u8 cec_rx_data10; /* 0x7d2a */ + u8 cec_rx_data11; /* 0x7d2b */ + u8 cec_rx_data12; /* 0x7d2c */ + u8 cec_rx_data13; /* 0x7d2d */ + u8 cec_rx_data14; /* 0x7d2e */ + u8 cec_rx_data15; /* 0x7d2f */ + u8 cec_lock; /* 0x7d30 */ + u8 cec_wkupctrl; /* 0x7d31 */ + u8 reserved26[0xce]; + /* I2C Master Registers (E-DDC) */ + u8 i2cm_slave; /* 0x7e00 */ + u8 i2cmess; /* 0x7e01 */ + u8 i2cm_datao; /* 0x7e02 */ + u8 i2cm_datai; /* 0x7e03 */ + u8 i2cm_operation; /* 0x7e04 */ + u8 i2cm_int; /* 0x7e05 */ + u8 i2cm_ctlint; /* 0x7e06 */ + u8 i2cm_div; /* 0x7e07 */ + u8 i2cm_segaddr; /* 0x7e08 */ + u8 i2cm_softrstz; /* 0x7e09 */ + u8 i2cm_segptr; /* 0x7e0a */ + u8 i2cm_ss_scl_hcnt_1_addr; /* 0x7e0b */ + u8 i2cm_ss_scl_hcnt_0_addr; /* 0x7e0c */ + u8 i2cm_ss_scl_lcnt_1_addr; /* 0x7e0d */ + u8 i2cm_ss_scl_lcnt_0_addr; /* 0x7e0e */ + u8 i2cm_fs_scl_hcnt_1_addr; /* 0x7e0f */ + u8 i2cm_fs_scl_hcnt_0_addr; /* 0x7e10 */ + u8 i2cm_fs_scl_lcnt_1_addr; /* 0x7e11 */ + u8 i2cm_fs_scl_lcnt_0_addr; /* 0x7e12 */ + u8 reserved27[0x1ed]; + /* Random Number Generator Registers (RNG) */ + u8 rng_base; /* 0x8000 */ +}; /* * Register field definitions diff --git a/arch/arm/include/asm/arch-mxs/dma.h b/arch/arm/include/asm/arch-mxs/dma.h index a0a0ea5010..1ac8696e64 100644 --- a/arch/arm/include/asm/arch-mxs/dma.h +++ b/arch/arm/include/asm/arch-mxs/dma.h @@ -40,6 +40,19 @@ /* * MXS DMA channels */ +#if defined(CONFIG_MX23) +enum { + MXS_DMA_CHANNEL_AHB_APBH_LCDIF = 0, + MXS_DMA_CHANNEL_AHB_APBH_SSP0, + MXS_DMA_CHANNEL_AHB_APBH_SSP1, + MXS_DMA_CHANNEL_AHB_APBH_RESERVED0, + MXS_DMA_CHANNEL_AHB_APBH_GPMI0, + MXS_DMA_CHANNEL_AHB_APBH_GPMI1, + MXS_DMA_CHANNEL_AHB_APBH_GPMI2, + MXS_DMA_CHANNEL_AHB_APBH_GPMI3, + MXS_MAX_DMA_CHANNELS, +}; +#elif defined(CONFIG_MX28) enum { MXS_DMA_CHANNEL_AHB_APBH_SSP0 = 0, MXS_DMA_CHANNEL_AHB_APBH_SSP1, @@ -53,9 +66,13 @@ enum { MXS_DMA_CHANNEL_AHB_APBH_GPMI5, MXS_DMA_CHANNEL_AHB_APBH_GPMI6, MXS_DMA_CHANNEL_AHB_APBH_GPMI7, - MXS_DMA_CHANNEL_AHB_APBH_SSP, + MXS_DMA_CHANNEL_AHB_APBH_HSADC, + MXS_DMA_CHANNEL_AHB_APBH_LCDIF, + MXS_DMA_CHANNEL_AHB_APBH_RESERVED0, + MXS_DMA_CHANNEL_AHB_APBH_RESERVED1, MXS_MAX_DMA_CHANNELS, }; +#endif /* * MXS DMA hardware command. diff --git a/arch/arm/include/asm/arch-mxs/imx-regs.h b/arch/arm/include/asm/arch-mxs/imx-regs.h index 05eb63c6d2..8f67497760 100644 --- a/arch/arm/include/asm/arch-mxs/imx-regs.h +++ b/arch/arm/include/asm/arch-mxs/imx-regs.h @@ -36,6 +36,8 @@ #include <asm/arch/regs-rtc.h> #include <asm/arch/regs-ssp.h> #include <asm/arch/regs-timrot.h> +#include <asm/arch/regs-usb.h> +#include <asm/arch/regs-usbphy.h> #ifdef CONFIG_MX23 #include <asm/arch/regs-clkctrl-mx23.h> diff --git a/arch/arm/include/asm/arch-mxs/iomux.h b/arch/arm/include/asm/arch-mxs/iomux.h index 7abdf58b8b..42887154c4 100644 --- a/arch/arm/include/asm/arch-mxs/iomux.h +++ b/arch/arm/include/asm/arch-mxs/iomux.h @@ -21,6 +21,10 @@ #ifndef __MACH_MXS_IOMUX_H__ #define __MACH_MXS_IOMUX_H__ +#ifndef __ASSEMBLY__ + +#include <asm/types.h> + /* * IOMUX/PAD Bit field definitions * @@ -165,4 +169,5 @@ int mxs_iomux_setup_pad(iomux_cfg_t pad); */ int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count); +#endif /* __ASSEMBLY__ */ #endif /* __MACH_MXS_IOMUX_H__*/ diff --git a/arch/arm/include/asm/arch-mxs/regs-ssp.h b/arch/arm/include/asm/arch-mxs/regs-ssp.h index 9b30f56f54..5920f9b4dc 100644 --- a/arch/arm/include/asm/arch-mxs/regs-ssp.h +++ b/arch/arm/include/asm/arch-mxs/regs-ssp.h @@ -74,6 +74,32 @@ struct mxs_ssp_regs { }; #endif +static inline int mxs_ssp_bus_id_valid(int bus) +{ +#if defined(CONFIG_MX23) + const unsigned int mxs_ssp_chan_count = 2; +#elif defined(CONFIG_MX28) + const unsigned int mxs_ssp_chan_count = 4; +#endif + + if (bus >= mxs_ssp_chan_count) + return 0; + + if (bus < 0) + return 0; + + return 1; +} + +static inline int mxs_ssp_clock_by_bus(unsigned int clock) +{ +#if defined(CONFIG_MX23) + return 0; +#elif defined(CONFIG_MX28) + return clock; +#endif +} + static inline struct mxs_ssp_regs *mxs_ssp_regs_by_bus(unsigned int port) { switch (port) { diff --git a/arch/arm/include/asm/arch-mxs/regs-timrot.h b/arch/arm/include/asm/arch-mxs/regs-timrot.h index 529a3bcdd1..f8537f1636 100644 --- a/arch/arm/include/asm/arch-mxs/regs-timrot.h +++ b/arch/arm/include/asm/arch-mxs/regs-timrot.h @@ -31,6 +31,16 @@ struct mxs_timrot_regs { mxs_reg_32(hw_timrot_rotctrl) mxs_reg_32(hw_timrot_rotcount) +#if defined(CONFIG_MX23) + mxs_reg_32(hw_timrot_timctrl0) + mxs_reg_32(hw_timrot_timcount0) + mxs_reg_32(hw_timrot_timctrl1) + mxs_reg_32(hw_timrot_timcount1) + mxs_reg_32(hw_timrot_timctrl2) + mxs_reg_32(hw_timrot_timcount2) + mxs_reg_32(hw_timrot_timctrl3) + mxs_reg_32(hw_timrot_timcount3) +#elif defined(CONFIG_MX28) mxs_reg_32(hw_timrot_timctrl0) mxs_reg_32(hw_timrot_running_count0) mxs_reg_32(hw_timrot_fixed_count0) @@ -47,6 +57,7 @@ struct mxs_timrot_regs { mxs_reg_32(hw_timrot_running_count3) mxs_reg_32(hw_timrot_fixed_count3) mxs_reg_32(hw_timrot_match_count3) +#endif mxs_reg_32(hw_timrot_version) }; #endif @@ -71,7 +82,11 @@ struct mxs_timrot_regs { #define TIMROT_ROTCTRL_OVERSAMPLE_1X (0x3 << 10) #define TIMROT_ROTCTRL_POLARITY_B (1 << 9) #define TIMROT_ROTCTRL_POLARITY_A (1 << 8) +#if defined(CONFIG_MX23) +#define TIMROT_ROTCTRL_SELECT_B_MASK (0x7 << 4) +#elif defined(CONFIG_MX28) #define TIMROT_ROTCTRL_SELECT_B_MASK (0xf << 4) +#endif #define TIMROT_ROTCTRL_SELECT_B_OFFSET 4 #define TIMROT_ROTCTRL_SELECT_B_NEVER_TICK (0x0 << 4) #define TIMROT_ROTCTRL_SELECT_B_PWM0 (0x1 << 4) @@ -79,12 +94,21 @@ struct mxs_timrot_regs { #define TIMROT_ROTCTRL_SELECT_B_PWM2 (0x3 << 4) #define TIMROT_ROTCTRL_SELECT_B_PWM3 (0x4 << 4) #define TIMROT_ROTCTRL_SELECT_B_PWM4 (0x5 << 4) +#if defined(CONFIG_MX23) +#define TIMROT_ROTCTRL_SELECT_B_ROTARYA (0x6 << 4) +#define TIMROT_ROTCTRL_SELECT_B_ROTARYB (0x7 << 4) +#elif defined(CONFIG_MX28) #define TIMROT_ROTCTRL_SELECT_B_PWM5 (0x6 << 4) #define TIMROT_ROTCTRL_SELECT_B_PWM6 (0x7 << 4) #define TIMROT_ROTCTRL_SELECT_B_PWM7 (0x8 << 4) #define TIMROT_ROTCTRL_SELECT_B_ROTARYA (0x9 << 4) #define TIMROT_ROTCTRL_SELECT_B_ROTARYB (0xa << 4) +#endif +#if defined(CONFIG_MX23) +#define TIMROT_ROTCTRL_SELECT_A_MASK 0x7 +#elif defined(CONFIG_MX28) #define TIMROT_ROTCTRL_SELECT_A_MASK 0xf +#endif #define TIMROT_ROTCTRL_SELECT_A_OFFSET 0 #define TIMROT_ROTCTRL_SELECT_A_NEVER_TICK 0x0 #define TIMROT_ROTCTRL_SELECT_A_PWM0 0x1 @@ -92,18 +116,25 @@ struct mxs_timrot_regs { #define TIMROT_ROTCTRL_SELECT_A_PWM2 0x3 #define TIMROT_ROTCTRL_SELECT_A_PWM3 0x4 #define TIMROT_ROTCTRL_SELECT_A_PWM4 0x5 +#if defined(CONFIG_MX23) +#define TIMROT_ROTCTRL_SELECT_A_ROTARYA 0x6 +#define TIMROT_ROTCTRL_SELECT_A_ROTARYB 0x7 +#elif defined(CONFIG_MX28) #define TIMROT_ROTCTRL_SELECT_A_PWM5 0x6 #define TIMROT_ROTCTRL_SELECT_A_PWM6 0x7 #define TIMROT_ROTCTRL_SELECT_A_PWM7 0x8 #define TIMROT_ROTCTRL_SELECT_A_ROTARYA 0x9 #define TIMROT_ROTCTRL_SELECT_A_ROTARYB 0xa +#endif #define TIMROT_ROTCOUNT_UPDOWN_MASK 0xffff #define TIMROT_ROTCOUNT_UPDOWN_OFFSET 0 #define TIMROT_TIMCTRLn_IRQ (1 << 15) #define TIMROT_TIMCTRLn_IRQ_EN (1 << 14) +#if defined(CONFIG_MX28) #define TIMROT_TIMCTRLn_MATCH_MODE (1 << 11) +#endif #define TIMROT_TIMCTRLn_POLARITY (1 << 8) #define TIMROT_TIMCTRLn_UPDATE (1 << 7) #define TIMROT_TIMCTRLn_RELOAD (1 << 6) @@ -121,6 +152,15 @@ struct mxs_timrot_regs { #define TIMROT_TIMCTRLn_SELECT_PWM2 0x3 #define TIMROT_TIMCTRLn_SELECT_PWM3 0x4 #define TIMROT_TIMCTRLn_SELECT_PWM4 0x5 +#if defined(CONFIG_MX23) +#define TIMROT_TIMCTRLn_SELECT_ROTARYA 0x6 +#define TIMROT_TIMCTRLn_SELECT_ROTARYB 0x7 +#define TIMROT_TIMCTRLn_SELECT_32KHZ_XTAL 0x8 +#define TIMROT_TIMCTRLn_SELECT_8KHZ_XTAL 0x9 +#define TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL 0xa +#define TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL 0xb +#define TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS 0xc +#elif defined(CONFIG_MX28) #define TIMROT_TIMCTRLn_SELECT_PWM5 0x6 #define TIMROT_TIMCTRLn_SELECT_PWM6 0x7 #define TIMROT_TIMCTRLn_SELECT_PWM7 0x8 @@ -131,15 +171,28 @@ struct mxs_timrot_regs { #define TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL 0xd #define TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL 0xe #define TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS 0xf +#endif +#if defined(CONFIG_MX23) +#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK (0xffff << 16) +#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET 16 +#elif defined(CONFIG_MX28) #define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK 0xffffffff #define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET 0 +#endif +#if defined(CONFIG_MX23) +#define TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK 0xffff +#define TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET 0 +#elif defined(CONFIG_MX28) #define TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK 0xffffffff #define TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET 0 +#endif +#if defined(CONFIG_MX28) #define TIMROT_MATCH_COUNTn_MATCH_COUNT_MASK 0xffffffff #define TIMROT_MATCH_COUNTn_MATCH_COUNT_OFFSET 0 +#endif #define TIMROT_TIMCTRL3_TEST_SIGNAL_MASK (0xf << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_OFFSET 16 @@ -149,6 +202,15 @@ struct mxs_timrot_regs { #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM2 (0x3 << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM3 (0x4 << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM4 (0x5 << 16) +#if defined(CONFIG_MX23) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYA (0x6 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYB (0x7 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_32KHZ_XTAL (0x8 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_8KHZ_XTAL (0x9 << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL (0xa << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL (0xb << 16) +#define TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS (0xc << 16) +#elif defined(CONFIG_MX28) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM5 (0x6 << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM6 (0x7 << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM7 (0x8 << 16) @@ -159,7 +221,46 @@ struct mxs_timrot_regs { #define TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL (0xd << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL (0xe << 16) #define TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS (0xf << 16) +#endif +#if defined(CONFIG_MX23) +#define TIMROT_TIMCTRL3_IRQ (1 << 15) +#define TIMROT_TIMCTRL3_IRQ_EN (1 << 14) +#define TIMROT_TIMCTRL3_DUTU_VALID (1 << 10) +#endif #define TIMROT_TIMCTRL3_DUTY_CYCLE (1 << 9) +#if defined(CONFIG_MX23) +#define TIMROT_TIMCTRL3_POLARITY_MASK (0x1 << 8) +#define TIMROT_TIMCTRL3_POLARITY_OFFSET 8 +#define TIMROT_TIMCTRL3_POLARITY_POSITIVE (0x0 << 8) +#define TIMROT_TIMCTRL3_POLARITY_NEGATIVE (0x1 << 8) +#define TIMROT_TIMCTRL3_UPDATE (1 << 7) +#define TIMROT_TIMCTRL3_RELOAD (1 << 6) +#define TIMROT_TIMCTRL3_PRESCALE_MASK (0x3 << 4) +#define TIMROT_TIMCTRL3_PRESCALE_OFFSET 4 +#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_1 (0x0 << 4) +#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_2 (0x1 << 4) +#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_4 (0x2 << 4) +#define TIMROT_TIMCTRL3_PRESCALE_DIV_BY_8 (0x3 << 4) +#define TIMROT_TIMCTRL3_SELECT_MASK 0xf +#define TIMROT_TIMCTRL3_SELECT_OFFSET 0 +#define TIMROT_TIMCTRL3_SELECT_NEVER_TICK 0x0 +#define TIMROT_TIMCTRL3_SELECT_PWM0 0x1 +#define TIMROT_TIMCTRL3_SELECT_PWM1 0x2 +#define TIMROT_TIMCTRL3_SELECT_PWM2 0x3 +#define TIMROT_TIMCTRL3_SELECT_PWM3 0x4 +#define TIMROT_TIMCTRL3_SELECT_PWM4 0x5 +#define TIMROT_TIMCTRL3_SELECT_ROTARYA 0x6 +#define TIMROT_TIMCTRL3_SELECT_ROTARYB 0x7 +#define TIMROT_TIMCTRL3_SELECT_32KHZ_XTAL 0x8 +#define TIMROT_TIMCTRL3_SELECT_8KHZ_XTAL 0x9 +#define TIMROT_TIMCTRL3_SELECT_4KHZ_XTAL 0xa +#define TIMROT_TIMCTRL3_SELECT_1KHZ_XTAL 0xb +#define TIMROT_TIMCTRL3_SELECT_TICK_ALWAYS 0xc +#define TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_MASK (0xffff << 16) +#define TIMROT_TIMCOUNT3_LOW_RUNNING_COUNT_OFFSET 16 +#define TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_MASK 0xffff +#define TIMROT_TIMCOUNT3_HIGH_FIXED_COUNT_OFFSET 0 +#endif #define TIMROT_VERSION_MAJOR_MASK (0xff << 24) #define TIMROT_VERSION_MAJOR_OFFSET 24 diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h index ffaffbb3bf..ae0babf17c 100644 --- a/arch/arm/include/asm/arch-omap3/dss.h +++ b/arch/arm/include/asm/arch-omap3/dss.h @@ -167,6 +167,36 @@ struct venc_regs { #define VENC_OUT_SEL (1 << 6) #define DIG_LPP_SHIFT 16 +/* LCD display type */ +#define PASSIVE_DISPLAY 0 +#define ACTIVE_DISPLAY 1 + +/* TFTDATALINES */ +#define LCD_INTERFACE_12_BIT 0 +#define LCD_INTERFACE_16_BIT 1 +#define LCD_INTERFACE_18_BIT 2 +#define LCD_INTERFACE_24_BIT 3 + +/* Polarity */ +#define DSS_IVS (1 << 12) +#define DSS_IHS (1 << 13) +#define DSS_IPC (1 << 14) +#define DSS_IEO (1 << 15) + +/* GFX format */ +#define GFXFORMAT_BITMAP1 (0x0 << 1) +#define GFXFORMAT_BITMAP2 (0x1 << 1) +#define GFXFORMAT_BITMAP4 (0x2 << 1) +#define GFXFORMAT_BITMAP8 (0x3 << 1) +#define GFXFORMAT_RGB12 (0x4 << 1) +#define GFXFORMAT_ARGB16 (0x5 << 1) +#define GFXFORMAT_RGB16 (0x6 << 1) +#define GFXFORMAT_RGB24_UNPACKED (0x8 << 1) +#define GFXFORMAT_RGB24_PACKED (0x9 << 1) +#define GFXFORMAT_ARGB32 (0xC << 1) +#define GFXFORMAT_RGBA32 (0xD << 1) +#define GFXFORMAT_RGBx32 (0xE << 1) + /* Panel Configuration */ struct panel_config { u32 timing_h; @@ -178,6 +208,7 @@ struct panel_config { u32 data_lines; u32 load_mode; u32 panel_color; + u32 gfx_format; void *frame_buffer; }; diff --git a/arch/arm/include/asm/arch-omap3/mmc_host_def.h b/arch/arm/include/asm/arch-omap3/mmc_host_def.h index 3ce1f07b8a..0ba621a1b8 100644 --- a/arch/arm/include/asm/arch-omap3/mmc_host_def.h +++ b/arch/arm/include/asm/arch-omap3/mmc_host_def.h @@ -25,6 +25,8 @@ #ifndef MMC_HOST_DEF_H #define MMC_HOST_DEF_H +#include <asm/omap_mmc.h> + /* T2 Register definitions */ #define T2_BASE 0x48002000 @@ -59,142 +61,5 @@ typedef struct t2 { #define OMAP_HSMMC2_BASE 0x480B4000 #define OMAP_HSMMC3_BASE 0x480AD000 -struct hsmmc { - unsigned char res1[0x10]; - unsigned int sysconfig; /* 0x10 */ - unsigned int sysstatus; /* 0x14 */ - unsigned char res2[0x14]; - unsigned int con; /* 0x2C */ - unsigned char res3[0xD4]; - unsigned int blk; /* 0x104 */ - unsigned int arg; /* 0x108 */ - unsigned int cmd; /* 0x10C */ - unsigned int rsp10; /* 0x110 */ - unsigned int rsp32; /* 0x114 */ - unsigned int rsp54; /* 0x118 */ - unsigned int rsp76; /* 0x11C */ - unsigned int data; /* 0x120 */ - unsigned int pstate; /* 0x124 */ - unsigned int hctl; /* 0x128 */ - unsigned int sysctl; /* 0x12C */ - unsigned int stat; /* 0x130 */ - unsigned int ie; /* 0x134 */ - unsigned char res4[0x8]; - unsigned int capa; /* 0x140 */ -}; - -/* - * OMAP HS MMC Bit definitions - */ -#define MMC_SOFTRESET (0x1 << 1) -#define RESETDONE (0x1 << 0) -#define NOOPENDRAIN (0x0 << 0) -#define OPENDRAIN (0x1 << 0) -#define OD (0x1 << 0) -#define INIT_NOINIT (0x0 << 1) -#define INIT_INITSTREAM (0x1 << 1) -#define HR_NOHOSTRESP (0x0 << 2) -#define STR_BLOCK (0x0 << 3) -#define MODE_FUNC (0x0 << 4) -#define DW8_1_4BITMODE (0x0 << 5) -#define MIT_CTO (0x0 << 6) -#define CDP_ACTIVEHIGH (0x0 << 7) -#define WPP_ACTIVEHIGH (0x0 << 8) -#define RESERVED_MASK (0x3 << 9) -#define CTPL_MMC_SD (0x0 << 11) -#define BLEN_512BYTESLEN (0x200 << 0) -#define NBLK_STPCNT (0x0 << 16) -#define DE_DISABLE (0x0 << 0) -#define BCE_DISABLE (0x0 << 1) -#define BCE_ENABLE (0x1 << 1) -#define ACEN_DISABLE (0x0 << 2) -#define DDIR_OFFSET (4) -#define DDIR_MASK (0x1 << 4) -#define DDIR_WRITE (0x0 << 4) -#define DDIR_READ (0x1 << 4) -#define MSBS_SGLEBLK (0x0 << 5) -#define MSBS_MULTIBLK (0x1 << 5) -#define RSP_TYPE_OFFSET (16) -#define RSP_TYPE_MASK (0x3 << 16) -#define RSP_TYPE_NORSP (0x0 << 16) -#define RSP_TYPE_LGHT136 (0x1 << 16) -#define RSP_TYPE_LGHT48 (0x2 << 16) -#define RSP_TYPE_LGHT48B (0x3 << 16) -#define CCCE_NOCHECK (0x0 << 19) -#define CCCE_CHECK (0x1 << 19) -#define CICE_NOCHECK (0x0 << 20) -#define CICE_CHECK (0x1 << 20) -#define DP_OFFSET (21) -#define DP_MASK (0x1 << 21) -#define DP_NO_DATA (0x0 << 21) -#define DP_DATA (0x1 << 21) -#define CMD_TYPE_NORMAL (0x0 << 22) -#define INDEX_OFFSET (24) -#define INDEX_MASK (0x3f << 24) -#define INDEX(i) (i << 24) -#define DATI_MASK (0x1 << 1) -#define CMDI_MASK (0x1 << 0) -#define DTW_1_BITMODE (0x0 << 1) -#define DTW_4_BITMODE (0x1 << 1) -#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ -#define SDBP_PWROFF (0x0 << 8) -#define SDBP_PWRON (0x1 << 8) -#define SDVS_1V8 (0x5 << 9) -#define SDVS_3V0 (0x6 << 9) -#define ICE_MASK (0x1 << 0) -#define ICE_STOP (0x0 << 0) -#define ICS_MASK (0x1 << 1) -#define ICS_NOTREADY (0x0 << 1) -#define ICE_OSCILLATE (0x1 << 0) -#define CEN_MASK (0x1 << 2) -#define CEN_DISABLE (0x0 << 2) -#define CEN_ENABLE (0x1 << 2) -#define CLKD_OFFSET (6) -#define CLKD_MASK (0x3FF << 6) -#define DTO_MASK (0xF << 16) -#define DTO_15THDTO (0xE << 16) -#define SOFTRESETALL (0x1 << 24) -#define CC_MASK (0x1 << 0) -#define TC_MASK (0x1 << 1) -#define BWR_MASK (0x1 << 4) -#define BRR_MASK (0x1 << 5) -#define ERRI_MASK (0x1 << 15) -#define IE_CC (0x01 << 0) -#define IE_TC (0x01 << 1) -#define IE_BWR (0x01 << 4) -#define IE_BRR (0x01 << 5) -#define IE_CTO (0x01 << 16) -#define IE_CCRC (0x01 << 17) -#define IE_CEB (0x01 << 18) -#define IE_CIE (0x01 << 19) -#define IE_DTO (0x01 << 20) -#define IE_DCRC (0x01 << 21) -#define IE_DEB (0x01 << 22) -#define IE_CERR (0x01 << 28) -#define IE_BADA (0x01 << 29) - -#define VS30_3V0SUP (1 << 25) -#define VS18_1V8SUP (1 << 26) - -/* Driver definitions */ -#define MMCSD_SECTOR_SIZE 512 -#define MMC_CARD 0 -#define SD_CARD 1 -#define BYTE_MODE 0 -#define SECTOR_MODE 1 -#define CLK_INITSEQ 0 -#define CLK_400KHZ 1 -#define CLK_MISC 2 - -#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) -#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) - -/* Clock Configurations and Macros */ -#define MMC_CLOCK_REFERENCE 96 /* MHz */ - -#define mmc_reg_out(addr, mask, val)\ - writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) - -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max); #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-omap3/spl.h b/arch/arm/include/asm/arch-omap3/spl.h index 404e16a5a0..dec4dacbad 100644 --- a/arch/arm/include/asm/arch-omap3/spl.h +++ b/arch/arm/include/asm/arch-omap3/spl.h @@ -26,7 +26,7 @@ #define BOOT_DEVICE_NONE 0 #define BOOT_DEVICE_XIP 1 #define BOOT_DEVICE_NAND 2 -#define BOOT_DEVICE_ONE_NAND 3 +#define BOOT_DEVICE_ONENAND 3 #define BOOT_DEVICE_MMC2 5 /*emmc*/ #define BOOT_DEVICE_MMC1 6 #define BOOT_DEVICE_XIPWAIT 7 diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h index be20fc0ce6..ed7a1c8be7 100644 --- a/arch/arm/include/asm/arch-omap4/clocks.h +++ b/arch/arm/include/asm/arch-omap4/clocks.h @@ -25,6 +25,7 @@ #ifndef _CLOCKS_OMAP4_H_ #define _CLOCKS_OMAP4_H_ #include <common.h> +#include <asm/omap_common.h> /* * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per @@ -38,479 +39,6 @@ #define CM_CLKMODE_DPLL_MPU 0x4A004160 #define CM_CLKSEL_CORE 0x4A004100 -struct omap4_prcm_regs { - /* cm1.ckgen */ - u32 cm_clksel_core; - u32 pad001[1]; - u32 cm_clksel_abe; - u32 pad002[1]; - u32 cm_dll_ctrl; - u32 pad003[3]; - u32 cm_clkmode_dpll_core; - u32 cm_idlest_dpll_core; - u32 cm_autoidle_dpll_core; - u32 cm_clksel_dpll_core; - u32 cm_div_m2_dpll_core; - u32 cm_div_m3_dpll_core; - u32 cm_div_m4_dpll_core; - u32 cm_div_m5_dpll_core; - u32 cm_div_m6_dpll_core; - u32 cm_div_m7_dpll_core; - u32 cm_ssc_deltamstep_dpll_core; - u32 cm_ssc_modfreqdiv_dpll_core; - u32 cm_emu_override_dpll_core; - u32 pad004[3]; - u32 cm_clkmode_dpll_mpu; - u32 cm_idlest_dpll_mpu; - u32 cm_autoidle_dpll_mpu; - u32 cm_clksel_dpll_mpu; - u32 cm_div_m2_dpll_mpu; - u32 pad005[5]; - u32 cm_ssc_deltamstep_dpll_mpu; - u32 cm_ssc_modfreqdiv_dpll_mpu; - u32 pad006[3]; - u32 cm_bypclk_dpll_mpu; - u32 cm_clkmode_dpll_iva; - u32 cm_idlest_dpll_iva; - u32 cm_autoidle_dpll_iva; - u32 cm_clksel_dpll_iva; - u32 pad007[2]; - u32 cm_div_m4_dpll_iva; - u32 cm_div_m5_dpll_iva; - u32 pad008[2]; - u32 cm_ssc_deltamstep_dpll_iva; - u32 cm_ssc_modfreqdiv_dpll_iva; - u32 pad009[3]; - u32 cm_bypclk_dpll_iva; - u32 cm_clkmode_dpll_abe; - u32 cm_idlest_dpll_abe; - u32 cm_autoidle_dpll_abe; - u32 cm_clksel_dpll_abe; - u32 cm_div_m2_dpll_abe; - u32 cm_div_m3_dpll_abe; - u32 pad010[4]; - u32 cm_ssc_deltamstep_dpll_abe; - u32 cm_ssc_modfreqdiv_dpll_abe; - u32 pad011[4]; - u32 cm_clkmode_dpll_ddrphy; - u32 cm_idlest_dpll_ddrphy; - u32 cm_autoidle_dpll_ddrphy; - u32 cm_clksel_dpll_ddrphy; - u32 cm_div_m2_dpll_ddrphy; - u32 pad012[1]; - u32 cm_div_m4_dpll_ddrphy; - u32 cm_div_m5_dpll_ddrphy; - u32 cm_div_m6_dpll_ddrphy; - u32 pad013[1]; - u32 cm_ssc_deltamstep_dpll_ddrphy; - u32 pad014[5]; - u32 cm_shadow_freq_config1; - u32 pad0141[47]; - u32 cm_mpu_mpu_clkctrl; - - /* cm1.dsp */ - u32 pad015[55]; - u32 cm_dsp_clkstctrl; - u32 pad016[7]; - u32 cm_dsp_dsp_clkctrl; - - /* cm1.abe */ - u32 pad017[55]; - u32 cm1_abe_clkstctrl; - u32 pad018[7]; - u32 cm1_abe_l4abe_clkctrl; - u32 pad019[1]; - u32 cm1_abe_aess_clkctrl; - u32 pad020[1]; - u32 cm1_abe_pdm_clkctrl; - u32 pad021[1]; - u32 cm1_abe_dmic_clkctrl; - u32 pad022[1]; - u32 cm1_abe_mcasp_clkctrl; - u32 pad023[1]; - u32 cm1_abe_mcbsp1_clkctrl; - u32 pad024[1]; - u32 cm1_abe_mcbsp2_clkctrl; - u32 pad025[1]; - u32 cm1_abe_mcbsp3_clkctrl; - u32 pad026[1]; - u32 cm1_abe_slimbus_clkctrl; - u32 pad027[1]; - u32 cm1_abe_timer5_clkctrl; - u32 pad028[1]; - u32 cm1_abe_timer6_clkctrl; - u32 pad029[1]; - u32 cm1_abe_timer7_clkctrl; - u32 pad030[1]; - u32 cm1_abe_timer8_clkctrl; - u32 pad031[1]; - u32 cm1_abe_wdt3_clkctrl; - - /* cm2.ckgen */ - u32 pad032[3805]; - u32 cm_clksel_mpu_m3_iss_root; - u32 cm_clksel_usb_60mhz; - u32 cm_scale_fclk; - u32 pad033[1]; - u32 cm_core_dvfs_perf1; - u32 cm_core_dvfs_perf2; - u32 cm_core_dvfs_perf3; - u32 cm_core_dvfs_perf4; - u32 pad034[1]; - u32 cm_core_dvfs_current; - u32 cm_iva_dvfs_perf_tesla; - u32 cm_iva_dvfs_perf_ivahd; - u32 cm_iva_dvfs_perf_abe; - u32 pad035[1]; - u32 cm_iva_dvfs_current; - u32 pad036[1]; - u32 cm_clkmode_dpll_per; - u32 cm_idlest_dpll_per; - u32 cm_autoidle_dpll_per; - u32 cm_clksel_dpll_per; - u32 cm_div_m2_dpll_per; - u32 cm_div_m3_dpll_per; - u32 cm_div_m4_dpll_per; - u32 cm_div_m5_dpll_per; - u32 cm_div_m6_dpll_per; - u32 cm_div_m7_dpll_per; - u32 cm_ssc_deltamstep_dpll_per; - u32 cm_ssc_modfreqdiv_dpll_per; - u32 cm_emu_override_dpll_per; - u32 pad037[3]; - u32 cm_clkmode_dpll_usb; - u32 cm_idlest_dpll_usb; - u32 cm_autoidle_dpll_usb; - u32 cm_clksel_dpll_usb; - u32 cm_div_m2_dpll_usb; - u32 pad038[5]; - u32 cm_ssc_deltamstep_dpll_usb; - u32 cm_ssc_modfreqdiv_dpll_usb; - u32 pad039[1]; - u32 cm_clkdcoldo_dpll_usb; - u32 pad040[2]; - u32 cm_clkmode_dpll_unipro; - u32 cm_idlest_dpll_unipro; - u32 cm_autoidle_dpll_unipro; - u32 cm_clksel_dpll_unipro; - u32 cm_div_m2_dpll_unipro; - u32 pad041[5]; - u32 cm_ssc_deltamstep_dpll_unipro; - u32 cm_ssc_modfreqdiv_dpll_unipro; - - /* cm2.core */ - u32 pad0411[324]; - u32 cm_l3_1_clkstctrl; - u32 pad042[1]; - u32 cm_l3_1_dynamicdep; - u32 pad043[5]; - u32 cm_l3_1_l3_1_clkctrl; - u32 pad044[55]; - u32 cm_l3_2_clkstctrl; - u32 pad045[1]; - u32 cm_l3_2_dynamicdep; - u32 pad046[5]; - u32 cm_l3_2_l3_2_clkctrl; - u32 pad047[1]; - u32 cm_l3_2_gpmc_clkctrl; - u32 pad048[1]; - u32 cm_l3_2_ocmc_ram_clkctrl; - u32 pad049[51]; - u32 cm_mpu_m3_clkstctrl; - u32 cm_mpu_m3_staticdep; - u32 cm_mpu_m3_dynamicdep; - u32 pad050[5]; - u32 cm_mpu_m3_mpu_m3_clkctrl; - u32 pad051[55]; - u32 cm_sdma_clkstctrl; - u32 cm_sdma_staticdep; - u32 cm_sdma_dynamicdep; - u32 pad052[5]; - u32 cm_sdma_sdma_clkctrl; - u32 pad053[55]; - u32 cm_memif_clkstctrl; - u32 pad054[7]; - u32 cm_memif_dmm_clkctrl; - u32 pad055[1]; - u32 cm_memif_emif_fw_clkctrl; - u32 pad056[1]; - u32 cm_memif_emif_1_clkctrl; - u32 pad057[1]; - u32 cm_memif_emif_2_clkctrl; - u32 pad058[1]; - u32 cm_memif_dll_clkctrl; - u32 pad059[3]; - u32 cm_memif_emif_h1_clkctrl; - u32 pad060[1]; - u32 cm_memif_emif_h2_clkctrl; - u32 pad061[1]; - u32 cm_memif_dll_h_clkctrl; - u32 pad062[39]; - u32 cm_c2c_clkstctrl; - u32 cm_c2c_staticdep; - u32 cm_c2c_dynamicdep; - u32 pad063[5]; - u32 cm_c2c_sad2d_clkctrl; - u32 pad064[1]; - u32 cm_c2c_modem_icr_clkctrl; - u32 pad065[1]; - u32 cm_c2c_sad2d_fw_clkctrl; - u32 pad066[51]; - u32 cm_l4cfg_clkstctrl; - u32 pad067[1]; - u32 cm_l4cfg_dynamicdep; - u32 pad068[5]; - u32 cm_l4cfg_l4_cfg_clkctrl; - u32 pad069[1]; - u32 cm_l4cfg_hw_sem_clkctrl; - u32 pad070[1]; - u32 cm_l4cfg_mailbox_clkctrl; - u32 pad071[1]; - u32 cm_l4cfg_sar_rom_clkctrl; - u32 pad072[49]; - u32 cm_l3instr_clkstctrl; - u32 pad073[7]; - u32 cm_l3instr_l3_3_clkctrl; - u32 pad074[1]; - u32 cm_l3instr_l3_instr_clkctrl; - u32 pad075[5]; - u32 cm_l3instr_intrconn_wp1_clkctrl; - - - /* cm2.ivahd */ - u32 pad076[47]; - u32 cm_ivahd_clkstctrl; - u32 pad077[7]; - u32 cm_ivahd_ivahd_clkctrl; - u32 pad078[1]; - u32 cm_ivahd_sl2_clkctrl; - - /* cm2.cam */ - u32 pad079[53]; - u32 cm_cam_clkstctrl; - u32 pad080[7]; - u32 cm_cam_iss_clkctrl; - u32 pad081[1]; - u32 cm_cam_fdif_clkctrl; - - /* cm2.dss */ - u32 pad082[53]; - u32 cm_dss_clkstctrl; - u32 pad083[7]; - u32 cm_dss_dss_clkctrl; - - /* cm2.sgx */ - u32 pad084[55]; - u32 cm_sgx_clkstctrl; - u32 pad085[7]; - u32 cm_sgx_sgx_clkctrl; - - /* cm2.l3init */ - u32 pad086[55]; - u32 cm_l3init_clkstctrl; - - /* cm2.l3init */ - u32 pad087[9]; - u32 cm_l3init_hsmmc1_clkctrl; - u32 pad088[1]; - u32 cm_l3init_hsmmc2_clkctrl; - u32 pad089[1]; - u32 cm_l3init_hsi_clkctrl; - u32 pad090[7]; - u32 cm_l3init_hsusbhost_clkctrl; - u32 pad091[1]; - u32 cm_l3init_hsusbotg_clkctrl; - u32 pad092[1]; - u32 cm_l3init_hsusbtll_clkctrl; - u32 pad093[3]; - u32 cm_l3init_p1500_clkctrl; - u32 pad094[21]; - u32 cm_l3init_fsusb_clkctrl; - u32 pad095[3]; - u32 cm_l3init_usbphy_clkctrl; - - /* cm2.l4per */ - u32 pad096[7]; - u32 cm_l4per_clkstctrl; - u32 pad097[1]; - u32 cm_l4per_dynamicdep; - u32 pad098[5]; - u32 cm_l4per_adc_clkctrl; - u32 pad100[1]; - u32 cm_l4per_gptimer10_clkctrl; - u32 pad101[1]; - u32 cm_l4per_gptimer11_clkctrl; - u32 pad102[1]; - u32 cm_l4per_gptimer2_clkctrl; - u32 pad103[1]; - u32 cm_l4per_gptimer3_clkctrl; - u32 pad104[1]; - u32 cm_l4per_gptimer4_clkctrl; - u32 pad105[1]; - u32 cm_l4per_gptimer9_clkctrl; - u32 pad106[1]; - u32 cm_l4per_elm_clkctrl; - u32 pad107[1]; - u32 cm_l4per_gpio2_clkctrl; - u32 pad108[1]; - u32 cm_l4per_gpio3_clkctrl; - u32 pad109[1]; - u32 cm_l4per_gpio4_clkctrl; - u32 pad110[1]; - u32 cm_l4per_gpio5_clkctrl; - u32 pad111[1]; - u32 cm_l4per_gpio6_clkctrl; - u32 pad112[1]; - u32 cm_l4per_hdq1w_clkctrl; - u32 pad113[1]; - u32 cm_l4per_hecc1_clkctrl; - u32 pad114[1]; - u32 cm_l4per_hecc2_clkctrl; - u32 pad115[1]; - u32 cm_l4per_i2c1_clkctrl; - u32 pad116[1]; - u32 cm_l4per_i2c2_clkctrl; - u32 pad117[1]; - u32 cm_l4per_i2c3_clkctrl; - u32 pad118[1]; - u32 cm_l4per_i2c4_clkctrl; - u32 pad119[1]; - u32 cm_l4per_l4per_clkctrl; - u32 pad1191[3]; - u32 cm_l4per_mcasp2_clkctrl; - u32 pad120[1]; - u32 cm_l4per_mcasp3_clkctrl; - u32 pad121[1]; - u32 cm_l4per_mcbsp4_clkctrl; - u32 pad122[1]; - u32 cm_l4per_mgate_clkctrl; - u32 pad123[1]; - u32 cm_l4per_mcspi1_clkctrl; - u32 pad124[1]; - u32 cm_l4per_mcspi2_clkctrl; - u32 pad125[1]; - u32 cm_l4per_mcspi3_clkctrl; - u32 pad126[1]; - u32 cm_l4per_mcspi4_clkctrl; - u32 pad127[5]; - u32 cm_l4per_mmcsd3_clkctrl; - u32 pad128[1]; - u32 cm_l4per_mmcsd4_clkctrl; - u32 pad129[1]; - u32 cm_l4per_msprohg_clkctrl; - u32 pad130[1]; - u32 cm_l4per_slimbus2_clkctrl; - u32 pad131[1]; - u32 cm_l4per_uart1_clkctrl; - u32 pad132[1]; - u32 cm_l4per_uart2_clkctrl; - u32 pad133[1]; - u32 cm_l4per_uart3_clkctrl; - u32 pad134[1]; - u32 cm_l4per_uart4_clkctrl; - u32 pad135[1]; - u32 cm_l4per_mmcsd5_clkctrl; - u32 pad136[1]; - u32 cm_l4per_i2c5_clkctrl; - u32 pad137[5]; - u32 cm_l4sec_clkstctrl; - u32 cm_l4sec_staticdep; - u32 cm_l4sec_dynamicdep; - u32 pad138[5]; - u32 cm_l4sec_aes1_clkctrl; - u32 pad139[1]; - u32 cm_l4sec_aes2_clkctrl; - u32 pad140[1]; - u32 cm_l4sec_des3des_clkctrl; - u32 pad141[1]; - u32 cm_l4sec_pkaeip29_clkctrl; - u32 pad142[1]; - u32 cm_l4sec_rng_clkctrl; - u32 pad143[1]; - u32 cm_l4sec_sha2md51_clkctrl; - u32 pad144[3]; - u32 cm_l4sec_cryptodma_clkctrl; - u32 pad145[776841]; - - /* l4 wkup regs */ - u32 pad201[6211]; - u32 cm_abe_pll_ref_clksel; - u32 cm_sys_clksel; - u32 pad202[1467]; - u32 cm_wkup_clkstctrl; - u32 pad203[7]; - u32 cm_wkup_l4wkup_clkctrl; - u32 pad204; - u32 cm_wkup_wdtimer1_clkctrl; - u32 pad205; - u32 cm_wkup_wdtimer2_clkctrl; - u32 pad206; - u32 cm_wkup_gpio1_clkctrl; - u32 pad207; - u32 cm_wkup_gptimer1_clkctrl; - u32 pad208; - u32 cm_wkup_gptimer12_clkctrl; - u32 pad209; - u32 cm_wkup_synctimer_clkctrl; - u32 pad210; - u32 cm_wkup_usim_clkctrl; - u32 pad211; - u32 cm_wkup_sarram_clkctrl; - u32 pad212[5]; - u32 cm_wkup_keyboard_clkctrl; - u32 pad213; - u32 cm_wkup_rtc_clkctrl; - u32 pad214; - u32 cm_wkup_bandgap_clkctrl; - u32 pad215[197]; - u32 prm_vc_val_bypass; - u32 prm_vc_cfg_channel; - u32 prm_vc_cfg_i2c_mode; - u32 prm_vc_cfg_i2c_clk; - -}; - -struct omap4_scrm_regs { - u32 revision; /* 0x0000 */ - u32 pad00[63]; - u32 clksetuptime; /* 0x0100 */ - u32 pmicsetuptime; /* 0x0104 */ - u32 pad01[2]; - u32 altclksrc; /* 0x0110 */ - u32 pad02[2]; - u32 c2cclkm; /* 0x011c */ - u32 pad03[56]; - u32 extclkreq; /* 0x0200 */ - u32 accclkreq; /* 0x0204 */ - u32 pwrreq; /* 0x0208 */ - u32 pad04[1]; - u32 auxclkreq0; /* 0x0210 */ - u32 auxclkreq1; /* 0x0214 */ - u32 auxclkreq2; /* 0x0218 */ - u32 auxclkreq3; /* 0x021c */ - u32 auxclkreq4; /* 0x0220 */ - u32 auxclkreq5; /* 0x0224 */ - u32 pad05[3]; - u32 c2cclkreq; /* 0x0234 */ - u32 pad06[54]; - u32 auxclk0; /* 0x0310 */ - u32 auxclk1; /* 0x0314 */ - u32 auxclk2; /* 0x0318 */ - u32 auxclk3; /* 0x031c */ - u32 auxclk4; /* 0x0320 */ - u32 auxclk5; /* 0x0324 */ - u32 pad07[54]; - u32 rsttime_reg; /* 0x0400 */ - u32 pad08[6]; - u32 c2crstctrl; /* 0x041c */ - u32 extpwronrstctrl; /* 0x0420 */ - u32 pad09[59]; - u32 extwarmrstst_reg; /* 0x0510 */ - u32 apewarmrstst_reg; /* 0x0514 */ - u32 pad10[1]; - u32 c2cwarmrstst_reg; /* 0x051C */ -}; - /* DPLL register offsets */ #define CM_CLKMODE_DPLL 0 #define CM_IDLEST_DPLL 0x4 @@ -714,54 +242,44 @@ struct omap4_scrm_regs { #define DPLL_NO_LOCK 0 #define DPLL_LOCK 1 -#define NUM_SYS_CLKS 7 - -struct dpll_regs { - u32 cm_clkmode_dpll; - u32 cm_idlest_dpll; - u32 cm_autoidle_dpll; - u32 cm_clksel_dpll; - u32 cm_div_m2_dpll; - u32 cm_div_m3_dpll; - u32 cm_div_m4_dpll; - u32 cm_div_m5_dpll; - u32 cm_div_m6_dpll; - u32 cm_div_m7_dpll; -}; - -/* DPLL parameter table */ -struct dpll_params { - u32 m; - u32 n; - s8 m2; - s8 m3; - s8 m4; - s8 m5; - s8 m6; - s8 m7; +struct omap4_scrm_regs { + u32 revision; /* 0x0000 */ + u32 pad00[63]; + u32 clksetuptime; /* 0x0100 */ + u32 pmicsetuptime; /* 0x0104 */ + u32 pad01[2]; + u32 altclksrc; /* 0x0110 */ + u32 pad02[2]; + u32 c2cclkm; /* 0x011c */ + u32 pad03[56]; + u32 extclkreq; /* 0x0200 */ + u32 accclkreq; /* 0x0204 */ + u32 pwrreq; /* 0x0208 */ + u32 pad04[1]; + u32 auxclkreq0; /* 0x0210 */ + u32 auxclkreq1; /* 0x0214 */ + u32 auxclkreq2; /* 0x0218 */ + u32 auxclkreq3; /* 0x021c */ + u32 auxclkreq4; /* 0x0220 */ + u32 auxclkreq5; /* 0x0224 */ + u32 pad05[3]; + u32 c2cclkreq; /* 0x0234 */ + u32 pad06[54]; + u32 auxclk0; /* 0x0310 */ + u32 auxclk1; /* 0x0314 */ + u32 auxclk2; /* 0x0318 */ + u32 auxclk3; /* 0x031c */ + u32 auxclk4; /* 0x0320 */ + u32 auxclk5; /* 0x0324 */ + u32 pad07[54]; + u32 rsttime_reg; /* 0x0400 */ + u32 pad08[6]; + u32 c2crstctrl; /* 0x041c */ + u32 extpwronrstctrl; /* 0x0420 */ + u32 pad09[59]; + u32 extwarmrstst_reg; /* 0x0510 */ + u32 apewarmrstst_reg; /* 0x0514 */ + u32 pad10[1]; + u32 c2cwarmrstst_reg; /* 0x051C */ }; - -extern struct omap4_prcm_regs *const prcm; -extern const u32 sys_clk_array[8]; - -void scale_vcores(void); -void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv); -u32 get_offset_code(u32 offset); -u32 omap_ddr_clk(void); -void do_scale_vcore(u32 vcore_reg, u32 volt_mv); -void setup_post_dividers(u32 *const base, const struct dpll_params *params); -u32 get_sys_clk_index(void); -void enable_basic_clocks(void); -void enable_basic_uboot_clocks(void); -void enable_non_essential_clocks(void); -void do_enable_clocks(u32 *const *clk_domains, - u32 *const *clk_modules_hw_auto, - u32 *const *clk_modules_explicit_en, - u8 wait_for_enable); -const struct dpll_params *get_mpu_dpll_params(void); -const struct dpll_params *get_core_dpll_params(void); -const struct dpll_params *get_per_dpll_params(void); -const struct dpll_params *get_iva_dpll_params(void); -const struct dpll_params *get_usb_dpll_params(void); -const struct dpll_params *get_abe_dpll_params(void); #endif /* _CLOCKS_OMAP4_H_ */ diff --git a/arch/arm/include/asm/arch-omap4/mmc_host_def.h b/arch/arm/include/asm/arch-omap4/mmc_host_def.h index 2114046e71..9c8ccb6c83 100644 --- a/arch/arm/include/asm/arch-omap4/mmc_host_def.h +++ b/arch/arm/include/asm/arch-omap4/mmc_host_def.h @@ -25,6 +25,8 @@ #ifndef MMC_HOST_DEF_H #define MMC_HOST_DEF_H +#include <asm/omap_mmc.h> + /* * OMAP HSMMC register definitions */ @@ -33,142 +35,4 @@ #define OMAP_HSMMC2_BASE 0x480B4100 #define OMAP_HSMMC3_BASE 0x480AD100 -struct hsmmc { - unsigned char res1[0x10]; - unsigned int sysconfig; /* 0x10 */ - unsigned int sysstatus; /* 0x14 */ - unsigned char res2[0x14]; - unsigned int con; /* 0x2C */ - unsigned char res3[0xD4]; - unsigned int blk; /* 0x104 */ - unsigned int arg; /* 0x108 */ - unsigned int cmd; /* 0x10C */ - unsigned int rsp10; /* 0x110 */ - unsigned int rsp32; /* 0x114 */ - unsigned int rsp54; /* 0x118 */ - unsigned int rsp76; /* 0x11C */ - unsigned int data; /* 0x120 */ - unsigned int pstate; /* 0x124 */ - unsigned int hctl; /* 0x128 */ - unsigned int sysctl; /* 0x12C */ - unsigned int stat; /* 0x130 */ - unsigned int ie; /* 0x134 */ - unsigned char res4[0x8]; - unsigned int capa; /* 0x140 */ -}; - -/* - * OMAP HS MMC Bit definitions - */ -#define MMC_SOFTRESET (0x1 << 1) -#define RESETDONE (0x1 << 0) -#define NOOPENDRAIN (0x0 << 0) -#define OPENDRAIN (0x1 << 0) -#define OD (0x1 << 0) -#define INIT_NOINIT (0x0 << 1) -#define INIT_INITSTREAM (0x1 << 1) -#define HR_NOHOSTRESP (0x0 << 2) -#define STR_BLOCK (0x0 << 3) -#define MODE_FUNC (0x0 << 4) -#define DW8_1_4BITMODE (0x0 << 5) -#define MIT_CTO (0x0 << 6) -#define CDP_ACTIVEHIGH (0x0 << 7) -#define WPP_ACTIVEHIGH (0x0 << 8) -#define RESERVED_MASK (0x3 << 9) -#define CTPL_MMC_SD (0x0 << 11) -#define BLEN_512BYTESLEN (0x200 << 0) -#define NBLK_STPCNT (0x0 << 16) -#define DE_DISABLE (0x0 << 0) -#define BCE_DISABLE (0x0 << 1) -#define BCE_ENABLE (0x1 << 1) -#define ACEN_DISABLE (0x0 << 2) -#define DDIR_OFFSET (4) -#define DDIR_MASK (0x1 << 4) -#define DDIR_WRITE (0x0 << 4) -#define DDIR_READ (0x1 << 4) -#define MSBS_SGLEBLK (0x0 << 5) -#define MSBS_MULTIBLK (0x1 << 5) -#define RSP_TYPE_OFFSET (16) -#define RSP_TYPE_MASK (0x3 << 16) -#define RSP_TYPE_NORSP (0x0 << 16) -#define RSP_TYPE_LGHT136 (0x1 << 16) -#define RSP_TYPE_LGHT48 (0x2 << 16) -#define RSP_TYPE_LGHT48B (0x3 << 16) -#define CCCE_NOCHECK (0x0 << 19) -#define CCCE_CHECK (0x1 << 19) -#define CICE_NOCHECK (0x0 << 20) -#define CICE_CHECK (0x1 << 20) -#define DP_OFFSET (21) -#define DP_MASK (0x1 << 21) -#define DP_NO_DATA (0x0 << 21) -#define DP_DATA (0x1 << 21) -#define CMD_TYPE_NORMAL (0x0 << 22) -#define INDEX_OFFSET (24) -#define INDEX_MASK (0x3f << 24) -#define INDEX(i) (i << 24) -#define DATI_MASK (0x1 << 1) -#define CMDI_MASK (0x1 << 0) -#define DTW_1_BITMODE (0x0 << 1) -#define DTW_4_BITMODE (0x1 << 1) -#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ -#define SDBP_PWROFF (0x0 << 8) -#define SDBP_PWRON (0x1 << 8) -#define SDVS_1V8 (0x5 << 9) -#define SDVS_3V0 (0x6 << 9) -#define ICE_MASK (0x1 << 0) -#define ICE_STOP (0x0 << 0) -#define ICS_MASK (0x1 << 1) -#define ICS_NOTREADY (0x0 << 1) -#define ICE_OSCILLATE (0x1 << 0) -#define CEN_MASK (0x1 << 2) -#define CEN_DISABLE (0x0 << 2) -#define CEN_ENABLE (0x1 << 2) -#define CLKD_OFFSET (6) -#define CLKD_MASK (0x3FF << 6) -#define DTO_MASK (0xF << 16) -#define DTO_15THDTO (0xE << 16) -#define SOFTRESETALL (0x1 << 24) -#define CC_MASK (0x1 << 0) -#define TC_MASK (0x1 << 1) -#define BWR_MASK (0x1 << 4) -#define BRR_MASK (0x1 << 5) -#define ERRI_MASK (0x1 << 15) -#define IE_CC (0x01 << 0) -#define IE_TC (0x01 << 1) -#define IE_BWR (0x01 << 4) -#define IE_BRR (0x01 << 5) -#define IE_CTO (0x01 << 16) -#define IE_CCRC (0x01 << 17) -#define IE_CEB (0x01 << 18) -#define IE_CIE (0x01 << 19) -#define IE_DTO (0x01 << 20) -#define IE_DCRC (0x01 << 21) -#define IE_DEB (0x01 << 22) -#define IE_CERR (0x01 << 28) -#define IE_BADA (0x01 << 29) - -#define VS30_3V0SUP (1 << 25) -#define VS18_1V8SUP (1 << 26) - -/* Driver definitions */ -#define MMCSD_SECTOR_SIZE 512 -#define MMC_CARD 0 -#define SD_CARD 1 -#define BYTE_MODE 0 -#define SECTOR_MODE 1 -#define CLK_INITSEQ 0 -#define CLK_400KHZ 1 -#define CLK_MISC 2 - -#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) -#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) - -/* Clock Configurations and Macros */ -#define MMC_CLOCK_REFERENCE 96 /* MHz */ - -#define mmc_reg_out(addr, mask, val)\ - writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) - -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max); - #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index d4b5076108..5f321fe6f0 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -132,34 +132,6 @@ struct s32ktimer { #define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) #define DEVICE_GP 0x3 -struct omap_sys_ctrl_regs { - unsigned int pad1[129]; - unsigned int control_id_code; /* 0x4A002204 */ - unsigned int pad11[22]; - unsigned int control_std_fuse_opp_bgap; /* 0x4a002260 */ - unsigned int pad2[24]; /* 0x4a002264 */ - unsigned int control_status; /* 0x4a0022c4 */ - unsigned int pad3[22]; /* 0x4a0022c8 */ - unsigned int control_ldosram_iva_voltage_ctrl; /* 0x4A002320 */ - unsigned int control_ldosram_mpu_voltage_ctrl; /* 0x4A002324 */ - unsigned int control_ldosram_core_voltage_ctrl; /* 0x4A002328 */ - unsigned int pad4[260277]; - unsigned int control_pbiaslite; /* 0x4A100600 */ - unsigned int pad5[63]; - unsigned int control_efuse_1; /* 0x4A100700 */ - unsigned int control_efuse_2; /* 0x4A100704 */ -}; - -struct control_lpddr2io_regs { - unsigned int control_lpddr2io1_0; - unsigned int control_lpddr2io1_1; - unsigned int control_lpddr2io1_2; - unsigned int control_lpddr2io1_3; - unsigned int control_lpddr2io2_0; - unsigned int control_lpddr2io2_1; - unsigned int control_lpddr2io2_2; - unsigned int control_lpddr2io2_3; -}; #endif /* __ASSEMBLY__ */ /* @@ -178,7 +150,11 @@ struct control_lpddr2io_regs { #define OMAP4_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4) #define OMAP4_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC) #define OMAP4_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) -#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x14) +#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14) +#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18) +#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C) +#define OMAP4_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20) +#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24) /* ROM code defines */ /* Boot device */ diff --git a/arch/arm/include/asm/arch-omap4/spl.h b/arch/arm/include/asm/arch-omap4/spl.h index cec84dc548..4e094f9c60 100644 --- a/arch/arm/include/asm/arch-omap4/spl.h +++ b/arch/arm/include/asm/arch-omap4/spl.h @@ -27,7 +27,7 @@ #define BOOT_DEVICE_XIP 1 #define BOOT_DEVICE_XIPWAIT 2 #define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_ONE_NAND 4 +#define BOOT_DEVICE_ONENAND 4 #define BOOT_DEVICE_MMC1 5 #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 0xFF diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index b48f81dc33..d5f1868eee 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -44,7 +44,7 @@ void sdelay(unsigned long); void set_pl310_ctrl_reg(u32 val); void setup_clocks_for_console(void); void prcm_init(void); -void bypass_dpll(u32 *const base); +void bypass_dpll(u32 const base); void freq_update_core(void); u32 get_sys_clk_freq(void); u32 omap4_ddr_clk(void); diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h index 5f1a7aa770..cfde374333 100644 --- a/arch/arm/include/asm/arch-omap5/clocks.h +++ b/arch/arm/include/asm/arch-omap5/clocks.h @@ -26,6 +26,7 @@ #ifndef _CLOCKS_OMAP5_H_ #define _CLOCKS_OMAP5_H_ #include <common.h> +#include <asm/omap_common.h> /* * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per @@ -39,456 +40,6 @@ #define CM_CLKMODE_DPLL_MPU (OMAP54XX_L4_CORE_BASE + 0x4160) #define CM_CLKSEL_CORE (OMAP54XX_L4_CORE_BASE + 0x4100) -struct omap5_prcm_regs { - /* cm1.ckgen */ - u32 cm_clksel_core; /* 4a004100 */ - u32 pad001[1]; /* 4a004104 */ - u32 cm_clksel_abe; /* 4a004108 */ - u32 pad002[1]; /* 4a00410c */ - u32 cm_dll_ctrl; /* 4a004110 */ - u32 pad003[3]; /* 4a004114 */ - u32 cm_clkmode_dpll_core; /* 4a004120 */ - u32 cm_idlest_dpll_core; /* 4a004124 */ - u32 cm_autoidle_dpll_core; /* 4a004128 */ - u32 cm_clksel_dpll_core; /* 4a00412c */ - u32 cm_div_m2_dpll_core; /* 4a004130 */ - u32 cm_div_m3_dpll_core; /* 4a004134 */ - u32 cm_div_h11_dpll_core; /* 4a004138 */ - u32 cm_div_h12_dpll_core; /* 4a00413c */ - u32 cm_div_h13_dpll_core; /* 4a004140 */ - u32 cm_div_h14_dpll_core; /* 4a004144 */ - u32 cm_ssc_deltamstep_dpll_core; /* 4a004148 */ - u32 cm_ssc_modfreqdiv_dpll_core; /* 4a00414c */ - u32 cm_emu_override_dpll_core; /* 4a004150 */ - - u32 cm_div_h22_dpllcore; /* 4a004154 */ - u32 cm_div_h23_dpll_core; /* 4a004158 */ - u32 pad0041[1]; /* 4a00415c */ - u32 cm_clkmode_dpll_mpu; /* 4a004160 */ - u32 cm_idlest_dpll_mpu; /* 4a004164 */ - u32 cm_autoidle_dpll_mpu; /* 4a004168 */ - u32 cm_clksel_dpll_mpu; /* 4a00416c */ - u32 cm_div_m2_dpll_mpu; /* 4a004170 */ - u32 pad005[5]; /* 4a004174 */ - u32 cm_ssc_deltamstep_dpll_mpu; /* 4a004188 */ - u32 cm_ssc_modfreqdiv_dpll_mpu; /* 4a00418c */ - u32 pad006[3]; /* 4a004190 */ - u32 cm_bypclk_dpll_mpu; /* 4a00419c */ - u32 cm_clkmode_dpll_iva; /* 4a0041a0 */ - u32 cm_idlest_dpll_iva; /* 4a0041a4 */ - u32 cm_autoidle_dpll_iva; /* 4a0041a8 */ - u32 cm_clksel_dpll_iva; /* 4a0041ac */ - u32 pad007[2]; /* 4a0041b0 */ - u32 cm_div_h11_dpll_iva; /* 4a0041b8 */ - u32 cm_div_h12_dpll_iva; /* 4a0041bc */ - u32 pad008[2]; /* 4a0041c0 */ - u32 cm_ssc_deltamstep_dpll_iva; /* 4a0041c8 */ - u32 cm_ssc_modfreqdiv_dpll_iva; /* 4a0041cc */ - u32 pad009[3]; /* 4a0041d0 */ - u32 cm_bypclk_dpll_iva; /* 4a0041dc */ - u32 cm_clkmode_dpll_abe; /* 4a0041e0 */ - u32 cm_idlest_dpll_abe; /* 4a0041e4 */ - u32 cm_autoidle_dpll_abe; /* 4a0041e8 */ - u32 cm_clksel_dpll_abe; /* 4a0041ec */ - u32 cm_div_m2_dpll_abe; /* 4a0041f0 */ - u32 cm_div_m3_dpll_abe; /* 4a0041f4 */ - u32 pad010[4]; /* 4a0041f8 */ - u32 cm_ssc_deltamstep_dpll_abe; /* 4a004208 */ - u32 cm_ssc_modfreqdiv_dpll_abe; /* 4a00420c */ - u32 pad011[4]; /* 4a004210 */ - u32 cm_clkmode_dpll_ddrphy; /* 4a004220 */ - u32 cm_idlest_dpll_ddrphy; /* 4a004224 */ - u32 cm_autoidle_dpll_ddrphy; /* 4a004228 */ - u32 cm_clksel_dpll_ddrphy; /* 4a00422c */ - u32 cm_div_m2_dpll_ddrphy; /* 4a004230 */ - u32 pad012[1]; /* 4a004234 */ - u32 cm_div_h11_dpll_ddrphy; /* 4a004238 */ - u32 cm_div_h12_dpll_ddrphy; /* 4a00423c */ - u32 cm_div_h13_dpll_ddrphy; /* 4a004240 */ - u32 pad013[1]; /* 4a004244 */ - u32 cm_ssc_deltamstep_dpll_ddrphy; /* 4a004248 */ - u32 pad014[5]; /* 4a00424c */ - u32 cm_shadow_freq_config1; /* 4a004260 */ - u32 pad0141[47]; /* 4a004264 */ - u32 cm_mpu_mpu_clkctrl; /* 4a004320 */ - - - /* cm1.dsp */ - u32 pad015[55]; /* 4a004324 */ - u32 cm_dsp_clkstctrl; /* 4a004400 */ - u32 pad016[7]; /* 4a004404 */ - u32 cm_dsp_dsp_clkctrl; /* 4a004420 */ - - /* cm1.abe */ - u32 pad017[55]; /* 4a004424 */ - u32 cm1_abe_clkstctrl; /* 4a004500 */ - u32 pad018[7]; /* 4a004504 */ - u32 cm1_abe_l4abe_clkctrl; /* 4a004520 */ - u32 pad019[1]; /* 4a004524 */ - u32 cm1_abe_aess_clkctrl; /* 4a004528 */ - u32 pad020[1]; /* 4a00452c */ - u32 cm1_abe_pdm_clkctrl; /* 4a004530 */ - u32 pad021[1]; /* 4a004534 */ - u32 cm1_abe_dmic_clkctrl; /* 4a004538 */ - u32 pad022[1]; /* 4a00453c */ - u32 cm1_abe_mcasp_clkctrl; /* 4a004540 */ - u32 pad023[1]; /* 4a004544 */ - u32 cm1_abe_mcbsp1_clkctrl; /* 4a004548 */ - u32 pad024[1]; /* 4a00454c */ - u32 cm1_abe_mcbsp2_clkctrl; /* 4a004550 */ - u32 pad025[1]; /* 4a004554 */ - u32 cm1_abe_mcbsp3_clkctrl; /* 4a004558 */ - u32 pad026[1]; /* 4a00455c */ - u32 cm1_abe_slimbus_clkctrl; /* 4a004560 */ - u32 pad027[1]; /* 4a004564 */ - u32 cm1_abe_timer5_clkctrl; /* 4a004568 */ - u32 pad028[1]; /* 4a00456c */ - u32 cm1_abe_timer6_clkctrl; /* 4a004570 */ - u32 pad029[1]; /* 4a004574 */ - u32 cm1_abe_timer7_clkctrl; /* 4a004578 */ - u32 pad030[1]; /* 4a00457c */ - u32 cm1_abe_timer8_clkctrl; /* 4a004580 */ - u32 pad031[1]; /* 4a004584 */ - u32 cm1_abe_wdt3_clkctrl; /* 4a004588 */ - - /* cm2.ckgen */ - u32 pad032[3805]; /* 4a00458c */ - u32 cm_clksel_mpu_m3_iss_root; /* 4a008100 */ - u32 cm_clksel_usb_60mhz; /* 4a008104 */ - u32 cm_scale_fclk; /* 4a008108 */ - u32 pad033[1]; /* 4a00810c */ - u32 cm_core_dvfs_perf1; /* 4a008110 */ - u32 cm_core_dvfs_perf2; /* 4a008114 */ - u32 cm_core_dvfs_perf3; /* 4a008118 */ - u32 cm_core_dvfs_perf4; /* 4a00811c */ - u32 pad034[1]; /* 4a008120 */ - u32 cm_core_dvfs_current; /* 4a008124 */ - u32 cm_iva_dvfs_perf_tesla; /* 4a008128 */ - u32 cm_iva_dvfs_perf_ivahd; /* 4a00812c */ - u32 cm_iva_dvfs_perf_abe; /* 4a008130 */ - u32 pad035[1]; /* 4a008134 */ - u32 cm_iva_dvfs_current; /* 4a008138 */ - u32 pad036[1]; /* 4a00813c */ - u32 cm_clkmode_dpll_per; /* 4a008140 */ - u32 cm_idlest_dpll_per; /* 4a008144 */ - u32 cm_autoidle_dpll_per; /* 4a008148 */ - u32 cm_clksel_dpll_per; /* 4a00814c */ - u32 cm_div_m2_dpll_per; /* 4a008150 */ - u32 cm_div_m3_dpll_per; /* 4a008154 */ - u32 cm_div_h11_dpll_per; /* 4a008158 */ - u32 cm_div_h12_dpll_per; /* 4a00815c */ - u32 pad0361[1]; /* 4a008160 */ - u32 cm_div_h14_dpll_per; /* 4a008164 */ - u32 cm_ssc_deltamstep_dpll_per; /* 4a008168 */ - u32 cm_ssc_modfreqdiv_dpll_per; /* 4a00816c */ - u32 cm_emu_override_dpll_per; /* 4a008170 */ - u32 pad037[3]; /* 4a008174 */ - u32 cm_clkmode_dpll_usb; /* 4a008180 */ - u32 cm_idlest_dpll_usb; /* 4a008184 */ - u32 cm_autoidle_dpll_usb; /* 4a008188 */ - u32 cm_clksel_dpll_usb; /* 4a00818c */ - u32 cm_div_m2_dpll_usb; /* 4a008190 */ - u32 pad038[5]; /* 4a008194 */ - u32 cm_ssc_deltamstep_dpll_usb; /* 4a0081a8 */ - u32 cm_ssc_modfreqdiv_dpll_usb; /* 4a0081ac */ - u32 pad039[1]; /* 4a0081b0 */ - u32 cm_clkdcoldo_dpll_usb; /* 4a0081b4 */ - u32 pad040[2]; /* 4a0081b8 */ - u32 cm_clkmode_dpll_unipro; /* 4a0081c0 */ - u32 cm_idlest_dpll_unipro; /* 4a0081c4 */ - u32 cm_autoidle_dpll_unipro; /* 4a0081c8 */ - u32 cm_clksel_dpll_unipro; /* 4a0081cc */ - u32 cm_div_m2_dpll_unipro; /* 4a0081d0 */ - u32 pad041[5]; /* 4a0081d4 */ - u32 cm_ssc_deltamstep_dpll_unipro; /* 4a0081e8 */ - u32 cm_ssc_modfreqdiv_dpll_unipro; /* 4a0081ec */ - - /* cm2.core */ - u32 pad0411[324]; /* 4a0081f0 */ - u32 cm_l3_1_clkstctrl; /* 4a008700 */ - u32 pad042[1]; /* 4a008704 */ - u32 cm_l3_1_dynamicdep; /* 4a008708 */ - u32 pad043[5]; /* 4a00870c */ - u32 cm_l3_1_l3_1_clkctrl; /* 4a008720 */ - u32 pad044[55]; /* 4a008724 */ - u32 cm_l3_2_clkstctrl; /* 4a008800 */ - u32 pad045[1]; /* 4a008804 */ - u32 cm_l3_2_dynamicdep; /* 4a008808 */ - u32 pad046[5]; /* 4a00880c */ - u32 cm_l3_2_l3_2_clkctrl; /* 4a008820 */ - u32 pad047[1]; /* 4a008824 */ - u32 cm_l3_2_gpmc_clkctrl; /* 4a008828 */ - u32 pad048[1]; /* 4a00882c */ - u32 cm_l3_2_ocmc_ram_clkctrl; /* 4a008830 */ - u32 pad049[51]; /* 4a008834 */ - u32 cm_mpu_m3_clkstctrl; /* 4a008900 */ - u32 cm_mpu_m3_staticdep; /* 4a008904 */ - u32 cm_mpu_m3_dynamicdep; /* 4a008908 */ - u32 pad050[5]; /* 4a00890c */ - u32 cm_mpu_m3_mpu_m3_clkctrl; /* 4a008920 */ - u32 pad051[55]; /* 4a008924 */ - u32 cm_sdma_clkstctrl; /* 4a008a00 */ - u32 cm_sdma_staticdep; /* 4a008a04 */ - u32 cm_sdma_dynamicdep; /* 4a008a08 */ - u32 pad052[5]; /* 4a008a0c */ - u32 cm_sdma_sdma_clkctrl; /* 4a008a20 */ - u32 pad053[55]; /* 4a008a24 */ - u32 cm_memif_clkstctrl; /* 4a008b00 */ - u32 pad054[7]; /* 4a008b04 */ - u32 cm_memif_dmm_clkctrl; /* 4a008b20 */ - u32 pad055[1]; /* 4a008b24 */ - u32 cm_memif_emif_fw_clkctrl; /* 4a008b28 */ - u32 pad056[1]; /* 4a008b2c */ - u32 cm_memif_emif_1_clkctrl; /* 4a008b30 */ - u32 pad057[1]; /* 4a008b34 */ - u32 cm_memif_emif_2_clkctrl; /* 4a008b38 */ - u32 pad058[1]; /* 4a008b3c */ - u32 cm_memif_dll_clkctrl; /* 4a008b40 */ - u32 pad059[3]; /* 4a008b44 */ - u32 cm_memif_emif_h1_clkctrl; /* 4a008b50 */ - u32 pad060[1]; /* 4a008b54 */ - u32 cm_memif_emif_h2_clkctrl; /* 4a008b58 */ - u32 pad061[1]; /* 4a008b5c */ - u32 cm_memif_dll_h_clkctrl; /* 4a008b60 */ - u32 pad062[39]; /* 4a008b64 */ - u32 cm_c2c_clkstctrl; /* 4a008c00 */ - u32 cm_c2c_staticdep; /* 4a008c04 */ - u32 cm_c2c_dynamicdep; /* 4a008c08 */ - u32 pad063[5]; /* 4a008c0c */ - u32 cm_c2c_sad2d_clkctrl; /* 4a008c20 */ - u32 pad064[1]; /* 4a008c24 */ - u32 cm_c2c_modem_icr_clkctrl; /* 4a008c28 */ - u32 pad065[1]; /* 4a008c2c */ - u32 cm_c2c_sad2d_fw_clkctrl; /* 4a008c30 */ - u32 pad066[51]; /* 4a008c34 */ - u32 cm_l4cfg_clkstctrl; /* 4a008d00 */ - u32 pad067[1]; /* 4a008d04 */ - u32 cm_l4cfg_dynamicdep; /* 4a008d08 */ - u32 pad068[5]; /* 4a008d0c */ - u32 cm_l4cfg_l4_cfg_clkctrl; /* 4a008d20 */ - u32 pad069[1]; /* 4a008d24 */ - u32 cm_l4cfg_hw_sem_clkctrl; /* 4a008d28 */ - u32 pad070[1]; /* 4a008d2c */ - u32 cm_l4cfg_mailbox_clkctrl; /* 4a008d30 */ - u32 pad071[1]; /* 4a008d34 */ - u32 cm_l4cfg_sar_rom_clkctrl; /* 4a008d38 */ - u32 pad072[49]; /* 4a008d3c */ - u32 cm_l3instr_clkstctrl; /* 4a008e00 */ - u32 pad073[7]; /* 4a008e04 */ - u32 cm_l3instr_l3_3_clkctrl; /* 4a008e20 */ - u32 pad074[1]; /* 4a008e24 */ - u32 cm_l3instr_l3_instr_clkctrl; /* 4a008e28 */ - u32 pad075[5]; /* 4a008e2c */ - u32 cm_l3instr_intrconn_wp1_clkctrl; /* 4a008e40 */ - - - /* cm2.ivahd */ - u32 pad076[47]; /* 4a008e44 */ - u32 cm_ivahd_clkstctrl; /* 4a008f00 */ - u32 pad077[7]; /* 4a008f04 */ - u32 cm_ivahd_ivahd_clkctrl; /* 4a008f20 */ - u32 pad078[1]; /* 4a008f24 */ - u32 cm_ivahd_sl2_clkctrl; /* 4a008f28 */ - - /* cm2.cam */ - u32 pad079[53]; /* 4a008f2c */ - u32 cm_cam_clkstctrl; /* 4a009000 */ - u32 pad080[7]; /* 4a009004 */ - u32 cm_cam_iss_clkctrl; /* 4a009020 */ - u32 pad081[1]; /* 4a009024 */ - u32 cm_cam_fdif_clkctrl; /* 4a009028 */ - - /* cm2.dss */ - u32 pad082[53]; /* 4a00902c */ - u32 cm_dss_clkstctrl; /* 4a009100 */ - u32 pad083[7]; /* 4a009104 */ - u32 cm_dss_dss_clkctrl; /* 4a009120 */ - - /* cm2.sgx */ - u32 pad084[55]; /* 4a009124 */ - u32 cm_sgx_clkstctrl; /* 4a009200 */ - u32 pad085[7]; /* 4a009204 */ - u32 cm_sgx_sgx_clkctrl; /* 4a009220 */ - - /* cm2.l3init */ - u32 pad086[55]; /* 4a009224 */ - u32 cm_l3init_clkstctrl; /* 4a009300 */ - - /* cm2.l3init */ - u32 pad087[9]; /* 4a009304 */ - u32 cm_l3init_hsmmc1_clkctrl; /* 4a009328 */ - u32 pad088[1]; /* 4a00932c */ - u32 cm_l3init_hsmmc2_clkctrl; /* 4a009330 */ - u32 pad089[1]; /* 4a009334 */ - u32 cm_l3init_hsi_clkctrl; /* 4a009338 */ - u32 pad090[7]; /* 4a00933c */ - u32 cm_l3init_hsusbhost_clkctrl; /* 4a009358 */ - u32 pad091[1]; /* 4a00935c */ - u32 cm_l3init_hsusbotg_clkctrl; /* 4a009360 */ - u32 pad092[1]; /* 4a009364 */ - u32 cm_l3init_hsusbtll_clkctrl; /* 4a009368 */ - u32 pad093[3]; /* 4a00936c */ - u32 cm_l3init_p1500_clkctrl; /* 4a009378 */ - u32 pad094[21]; /* 4a00937c */ - u32 cm_l3init_fsusb_clkctrl; /* 4a0093d0 */ - u32 pad095[3]; /* 4a0093d4 */ - u32 cm_l3init_ocp2scp1_clkctrl; - - /* cm2.l4per */ - u32 pad096[7]; /* 4a0093e4 */ - u32 cm_l4per_clkstctrl; /* 4a009400 */ - u32 pad097[1]; /* 4a009404 */ - u32 cm_l4per_dynamicdep; /* 4a009408 */ - u32 pad098[5]; /* 4a00940c */ - u32 cm_l4per_adc_clkctrl; /* 4a009420 */ - u32 pad100[1]; /* 4a009424 */ - u32 cm_l4per_gptimer10_clkctrl; /* 4a009428 */ - u32 pad101[1]; /* 4a00942c */ - u32 cm_l4per_gptimer11_clkctrl; /* 4a009430 */ - u32 pad102[1]; /* 4a009434 */ - u32 cm_l4per_gptimer2_clkctrl; /* 4a009438 */ - u32 pad103[1]; /* 4a00943c */ - u32 cm_l4per_gptimer3_clkctrl; /* 4a009440 */ - u32 pad104[1]; /* 4a009444 */ - u32 cm_l4per_gptimer4_clkctrl; /* 4a009448 */ - u32 pad105[1]; /* 4a00944c */ - u32 cm_l4per_gptimer9_clkctrl; /* 4a009450 */ - u32 pad106[1]; /* 4a009454 */ - u32 cm_l4per_elm_clkctrl; /* 4a009458 */ - u32 pad107[1]; /* 4a00945c */ - u32 cm_l4per_gpio2_clkctrl; /* 4a009460 */ - u32 pad108[1]; /* 4a009464 */ - u32 cm_l4per_gpio3_clkctrl; /* 4a009468 */ - u32 pad109[1]; /* 4a00946c */ - u32 cm_l4per_gpio4_clkctrl; /* 4a009470 */ - u32 pad110[1]; /* 4a009474 */ - u32 cm_l4per_gpio5_clkctrl; /* 4a009478 */ - u32 pad111[1]; /* 4a00947c */ - u32 cm_l4per_gpio6_clkctrl; /* 4a009480 */ - u32 pad112[1]; /* 4a009484 */ - u32 cm_l4per_hdq1w_clkctrl; /* 4a009488 */ - u32 pad113[1]; /* 4a00948c */ - u32 cm_l4per_hecc1_clkctrl; /* 4a009490 */ - u32 pad114[1]; /* 4a009494 */ - u32 cm_l4per_hecc2_clkctrl; /* 4a009498 */ - u32 pad115[1]; /* 4a00949c */ - u32 cm_l4per_i2c1_clkctrl; /* 4a0094a0 */ - u32 pad116[1]; /* 4a0094a4 */ - u32 cm_l4per_i2c2_clkctrl; /* 4a0094a8 */ - u32 pad117[1]; /* 4a0094ac */ - u32 cm_l4per_i2c3_clkctrl; /* 4a0094b0 */ - u32 pad118[1]; /* 4a0094b4 */ - u32 cm_l4per_i2c4_clkctrl; /* 4a0094b8 */ - u32 pad119[1]; /* 4a0094bc */ - u32 cm_l4per_l4per_clkctrl; /* 4a0094c0 */ - u32 pad1191[3]; /* 4a0094c4 */ - u32 cm_l4per_mcasp2_clkctrl; /* 4a0094d0 */ - u32 pad120[1]; /* 4a0094d4 */ - u32 cm_l4per_mcasp3_clkctrl; /* 4a0094d8 */ - u32 pad121[3]; /* 4a0094dc */ - u32 cm_l4per_mgate_clkctrl; /* 4a0094e8 */ - u32 pad123[1]; /* 4a0094ec */ - u32 cm_l4per_mcspi1_clkctrl; /* 4a0094f0 */ - u32 pad124[1]; /* 4a0094f4 */ - u32 cm_l4per_mcspi2_clkctrl; /* 4a0094f8 */ - u32 pad125[1]; /* 4a0094fc */ - u32 cm_l4per_mcspi3_clkctrl; /* 4a009500 */ - u32 pad126[1]; /* 4a009504 */ - u32 cm_l4per_mcspi4_clkctrl; /* 4a009508 */ - u32 pad127[1]; /* 4a00950c */ - u32 cm_l4per_gpio7_clkctrl; /* 4a009510 */ - u32 pad1271[1]; /* 4a009514 */ - u32 cm_l4per_gpio8_clkctrl; /* 4a009518 */ - u32 pad1272[1]; /* 4a00951c */ - u32 cm_l4per_mmcsd3_clkctrl; /* 4a009520 */ - u32 pad128[1]; /* 4a009524 */ - u32 cm_l4per_mmcsd4_clkctrl; /* 4a009528 */ - u32 pad129[1]; /* 4a00952c */ - u32 cm_l4per_msprohg_clkctrl; /* 4a009530 */ - u32 pad130[1]; /* 4a009534 */ - u32 cm_l4per_slimbus2_clkctrl; /* 4a009538 */ - u32 pad131[1]; /* 4a00953c */ - u32 cm_l4per_uart1_clkctrl; /* 4a009540 */ - u32 pad132[1]; /* 4a009544 */ - u32 cm_l4per_uart2_clkctrl; /* 4a009548 */ - u32 pad133[1]; /* 4a00954c */ - u32 cm_l4per_uart3_clkctrl; /* 4a009550 */ - u32 pad134[1]; /* 4a009554 */ - u32 cm_l4per_uart4_clkctrl; /* 4a009558 */ - u32 pad135[1]; /* 4a00955c */ - u32 cm_l4per_mmcsd5_clkctrl; /* 4a009560 */ - u32 pad136[1]; /* 4a009564 */ - u32 cm_l4per_i2c5_clkctrl; /* 4a009568 */ - u32 pad1371[1]; /* 4a00956c */ - u32 cm_l4per_uart5_clkctrl; /* 4a009570 */ - u32 pad1372[1]; /* 4a009574 */ - u32 cm_l4per_uart6_clkctrl; /* 4a009578 */ - u32 pad1374[1]; /* 4a00957c */ - u32 cm_l4sec_clkstctrl; /* 4a009580 */ - u32 cm_l4sec_staticdep; /* 4a009584 */ - u32 cm_l4sec_dynamicdep; /* 4a009588 */ - u32 pad138[5]; /* 4a00958c */ - u32 cm_l4sec_aes1_clkctrl; /* 4a0095a0 */ - u32 pad139[1]; /* 4a0095a4 */ - u32 cm_l4sec_aes2_clkctrl; /* 4a0095a8 */ - u32 pad140[1]; /* 4a0095ac */ - u32 cm_l4sec_des3des_clkctrl; /* 4a0095b0 */ - u32 pad141[1]; /* 4a0095b4 */ - u32 cm_l4sec_pkaeip29_clkctrl; /* 4a0095b8 */ - u32 pad142[1]; /* 4a0095bc */ - u32 cm_l4sec_rng_clkctrl; /* 4a0095c0 */ - u32 pad143[1]; /* 4a0095c4 */ - u32 cm_l4sec_sha2md51_clkctrl; /* 4a0095c8 */ - u32 pad144[3]; /* 4a0095cc */ - u32 cm_l4sec_cryptodma_clkctrl; /* 4a0095d8 */ - u32 pad145[3660425]; /* 4a0095dc */ - - /* l4 wkup regs */ - u32 pad201[6211]; /* 4ae00000 */ - u32 cm_abe_pll_ref_clksel; /* 4ae0610c */ - u32 cm_sys_clksel; /* 4ae06110 */ - u32 pad202[1467]; /* 4ae06114 */ - u32 cm_wkup_clkstctrl; /* 4ae07800 */ - u32 pad203[7]; /* 4ae07804 */ - u32 cm_wkup_l4wkup_clkctrl; /* 4ae07820 */ - u32 pad204; /* 4ae07824 */ - u32 cm_wkup_wdtimer1_clkctrl; /* 4ae07828 */ - u32 pad205; /* 4ae0782c */ - u32 cm_wkup_wdtimer2_clkctrl; /* 4ae07830 */ - u32 pad206; /* 4ae07834 */ - u32 cm_wkup_gpio1_clkctrl; /* 4ae07838 */ - u32 pad207; /* 4ae0783c */ - u32 cm_wkup_gptimer1_clkctrl; /* 4ae07840 */ - u32 pad208; /* 4ae07844 */ - u32 cm_wkup_gptimer12_clkctrl; /* 4ae07848 */ - u32 pad209; /* 4ae0784c */ - u32 cm_wkup_synctimer_clkctrl; /* 4ae07850 */ - u32 pad210; /* 4ae07854 */ - u32 cm_wkup_usim_clkctrl; /* 4ae07858 */ - u32 pad211; /* 4ae0785c */ - u32 cm_wkup_sarram_clkctrl; /* 4ae07860 */ - u32 pad212[5]; /* 4ae07864 */ - u32 cm_wkup_keyboard_clkctrl; /* 4ae07878 */ - u32 pad213; /* 4ae0787c */ - u32 cm_wkup_rtc_clkctrl; /* 4ae07880 */ - u32 pad214; /* 4ae07884 */ - u32 cm_wkup_bandgap_clkctrl; /* 4ae07888 */ - u32 pad215[1]; /* 4ae0788c */ - u32 cm_wkupaon_scrm_clkctrl; /* 4ae07890 */ - u32 pad216[195]; - u32 prm_vc_val_bypass; /* 4ae07ba0 */ - u32 pad217[4]; - u32 prm_vc_cfg_i2c_mode; /* 4ae07bb4 */ - u32 prm_vc_cfg_i2c_clk; /* 4ae07bb8 */ - u32 pad218[2]; - u32 prm_sldo_core_setup; /* 4ae07bc4 */ - u32 prm_sldo_core_ctrl; /* 4ae07bc8 */ - u32 prm_sldo_mpu_setup; /* 4ae07bcc */ - u32 prm_sldo_mpu_ctrl; /* 4ae07bd0 */ - u32 prm_sldo_mm_setup; /* 4ae07bd4 */ - u32 prm_sldo_mm_ctrl; /* 4ae07bd8 */ -}; - /* DPLL register offsets */ #define CM_CLKMODE_DPLL 0 #define CM_IDLEST_DPLL 0x4 @@ -625,9 +176,9 @@ struct omap5_prcm_regs { /* CM_MPU_MPU_CLKCTRL */ #define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24 -#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24) -#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 25 -#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25) +#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (3 << 24) +#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 26 +#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 26) /* CM_WKUPAON_SCRM_CLKCTRL */ #define OPTFCLKEN_SCRM_PER_SHIFT 9 @@ -635,6 +186,10 @@ struct omap5_prcm_regs { #define OPTFCLKEN_SCRM_CORE_SHIFT 8 #define OPTFCLKEN_SCRM_CORE_MASK (1 << 8) +/* CM_COREAON_IO_SRCOMP_CLKCTRL */ +#define OPTFCLKEN_SRCOMP_FCLK_SHIFT 8 +#define OPTFCLKEN_SRCOMP_FCLK_MASK (1 << 8) + /* Clock frequencies */ #define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000 #define OMAP_SYS_CLK_IND_38_4_MHZ 6 @@ -650,12 +205,25 @@ struct omap5_prcm_regs { #define SMPS_REG_ADDR_8_CORE 0x37 /* PALMAS VOLTAGE SETTINGS in mv for OPP_NOMINAL */ -#define VDD_MPU 1000 -#define VDD_MM 1000 +/* ES1.0 settings */ +#define VDD_MPU 1040 +#define VDD_MM 1040 #define VDD_CORE 1040 -#define VDD_MPU_5432 1150 -#define VDD_MM_5432 1150 -#define VDD_CORE_5432 1150 + +#define VDD_MPU_LOW 890 +#define VDD_MM_LOW 890 +#define VDD_CORE_LOW 890 + +/* ES2.0 settings */ +#define VDD_MPU_ES2 1060 +#define VDD_MM_ES2 1025 +#define VDD_CORE_ES2 1040 + +#define VDD_MPU_ES2_HIGH 1250 +#define VDD_MM_ES2_OD 1120 + +#define VDD_MPU_ES2_LOW 880 +#define VDD_MM_ES2_LOW 880 /* Standard offset is 0.5v expressed in uv */ #define PALMAS_SMPS_BASE_VOLT_UV 500000 @@ -683,59 +251,4 @@ struct omap5_prcm_regs { #define DPLL_NO_LOCK 0 #define DPLL_LOCK 1 -#define NUM_SYS_CLKS 7 - -struct dpll_regs { - u32 cm_clkmode_dpll; - u32 cm_idlest_dpll; - u32 cm_autoidle_dpll; - u32 cm_clksel_dpll; - u32 cm_div_m2_dpll; - u32 cm_div_m3_dpll; - u32 cm_div_h11_dpll; - u32 cm_div_h12_dpll; - u32 cm_div_h13_dpll; - u32 cm_div_h14_dpll; - u32 reserved[3]; - u32 cm_div_h22_dpll; - u32 cm_div_h23_dpll; -}; - -/* DPLL parameter table */ -struct dpll_params { - u32 m; - u32 n; - s8 m2; - s8 m3; - s8 h11; - s8 h12; - s8 h13; - s8 h14; - s8 h22; - s8 h23; -}; - -extern struct omap5_prcm_regs *const prcm; -extern const u32 sys_clk_array[8]; - -void scale_vcores(void); -void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv); -u32 get_offset_code(u32 offset); -u32 omap_ddr_clk(void); -void do_scale_vcore(u32 vcore_reg, u32 volt_mv); -void setup_post_dividers(u32 *const base, const struct dpll_params *params); -u32 get_sys_clk_index(void); -void enable_basic_clocks(void); -void enable_non_essential_clocks(void); -void enable_basic_uboot_clocks(void); -void do_enable_clocks(u32 *const *clk_domains, - u32 *const *clk_modules_hw_auto, - u32 *const *clk_modules_explicit_en, - u8 wait_for_enable); -const struct dpll_params *get_mpu_dpll_params(void); -const struct dpll_params *get_core_dpll_params(void); -const struct dpll_params *get_per_dpll_params(void); -const struct dpll_params *get_iva_dpll_params(void); -const struct dpll_params *get_usb_dpll_params(void); -const struct dpll_params *get_abe_dpll_params(void); #endif /* _CLOCKS_OMAP5_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/mmc_host_def.h b/arch/arm/include/asm/arch-omap5/mmc_host_def.h index 2114046e71..9c8ccb6c83 100644 --- a/arch/arm/include/asm/arch-omap5/mmc_host_def.h +++ b/arch/arm/include/asm/arch-omap5/mmc_host_def.h @@ -25,6 +25,8 @@ #ifndef MMC_HOST_DEF_H #define MMC_HOST_DEF_H +#include <asm/omap_mmc.h> + /* * OMAP HSMMC register definitions */ @@ -33,142 +35,4 @@ #define OMAP_HSMMC2_BASE 0x480B4100 #define OMAP_HSMMC3_BASE 0x480AD100 -struct hsmmc { - unsigned char res1[0x10]; - unsigned int sysconfig; /* 0x10 */ - unsigned int sysstatus; /* 0x14 */ - unsigned char res2[0x14]; - unsigned int con; /* 0x2C */ - unsigned char res3[0xD4]; - unsigned int blk; /* 0x104 */ - unsigned int arg; /* 0x108 */ - unsigned int cmd; /* 0x10C */ - unsigned int rsp10; /* 0x110 */ - unsigned int rsp32; /* 0x114 */ - unsigned int rsp54; /* 0x118 */ - unsigned int rsp76; /* 0x11C */ - unsigned int data; /* 0x120 */ - unsigned int pstate; /* 0x124 */ - unsigned int hctl; /* 0x128 */ - unsigned int sysctl; /* 0x12C */ - unsigned int stat; /* 0x130 */ - unsigned int ie; /* 0x134 */ - unsigned char res4[0x8]; - unsigned int capa; /* 0x140 */ -}; - -/* - * OMAP HS MMC Bit definitions - */ -#define MMC_SOFTRESET (0x1 << 1) -#define RESETDONE (0x1 << 0) -#define NOOPENDRAIN (0x0 << 0) -#define OPENDRAIN (0x1 << 0) -#define OD (0x1 << 0) -#define INIT_NOINIT (0x0 << 1) -#define INIT_INITSTREAM (0x1 << 1) -#define HR_NOHOSTRESP (0x0 << 2) -#define STR_BLOCK (0x0 << 3) -#define MODE_FUNC (0x0 << 4) -#define DW8_1_4BITMODE (0x0 << 5) -#define MIT_CTO (0x0 << 6) -#define CDP_ACTIVEHIGH (0x0 << 7) -#define WPP_ACTIVEHIGH (0x0 << 8) -#define RESERVED_MASK (0x3 << 9) -#define CTPL_MMC_SD (0x0 << 11) -#define BLEN_512BYTESLEN (0x200 << 0) -#define NBLK_STPCNT (0x0 << 16) -#define DE_DISABLE (0x0 << 0) -#define BCE_DISABLE (0x0 << 1) -#define BCE_ENABLE (0x1 << 1) -#define ACEN_DISABLE (0x0 << 2) -#define DDIR_OFFSET (4) -#define DDIR_MASK (0x1 << 4) -#define DDIR_WRITE (0x0 << 4) -#define DDIR_READ (0x1 << 4) -#define MSBS_SGLEBLK (0x0 << 5) -#define MSBS_MULTIBLK (0x1 << 5) -#define RSP_TYPE_OFFSET (16) -#define RSP_TYPE_MASK (0x3 << 16) -#define RSP_TYPE_NORSP (0x0 << 16) -#define RSP_TYPE_LGHT136 (0x1 << 16) -#define RSP_TYPE_LGHT48 (0x2 << 16) -#define RSP_TYPE_LGHT48B (0x3 << 16) -#define CCCE_NOCHECK (0x0 << 19) -#define CCCE_CHECK (0x1 << 19) -#define CICE_NOCHECK (0x0 << 20) -#define CICE_CHECK (0x1 << 20) -#define DP_OFFSET (21) -#define DP_MASK (0x1 << 21) -#define DP_NO_DATA (0x0 << 21) -#define DP_DATA (0x1 << 21) -#define CMD_TYPE_NORMAL (0x0 << 22) -#define INDEX_OFFSET (24) -#define INDEX_MASK (0x3f << 24) -#define INDEX(i) (i << 24) -#define DATI_MASK (0x1 << 1) -#define CMDI_MASK (0x1 << 0) -#define DTW_1_BITMODE (0x0 << 1) -#define DTW_4_BITMODE (0x1 << 1) -#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ -#define SDBP_PWROFF (0x0 << 8) -#define SDBP_PWRON (0x1 << 8) -#define SDVS_1V8 (0x5 << 9) -#define SDVS_3V0 (0x6 << 9) -#define ICE_MASK (0x1 << 0) -#define ICE_STOP (0x0 << 0) -#define ICS_MASK (0x1 << 1) -#define ICS_NOTREADY (0x0 << 1) -#define ICE_OSCILLATE (0x1 << 0) -#define CEN_MASK (0x1 << 2) -#define CEN_DISABLE (0x0 << 2) -#define CEN_ENABLE (0x1 << 2) -#define CLKD_OFFSET (6) -#define CLKD_MASK (0x3FF << 6) -#define DTO_MASK (0xF << 16) -#define DTO_15THDTO (0xE << 16) -#define SOFTRESETALL (0x1 << 24) -#define CC_MASK (0x1 << 0) -#define TC_MASK (0x1 << 1) -#define BWR_MASK (0x1 << 4) -#define BRR_MASK (0x1 << 5) -#define ERRI_MASK (0x1 << 15) -#define IE_CC (0x01 << 0) -#define IE_TC (0x01 << 1) -#define IE_BWR (0x01 << 4) -#define IE_BRR (0x01 << 5) -#define IE_CTO (0x01 << 16) -#define IE_CCRC (0x01 << 17) -#define IE_CEB (0x01 << 18) -#define IE_CIE (0x01 << 19) -#define IE_DTO (0x01 << 20) -#define IE_DCRC (0x01 << 21) -#define IE_DEB (0x01 << 22) -#define IE_CERR (0x01 << 28) -#define IE_BADA (0x01 << 29) - -#define VS30_3V0SUP (1 << 25) -#define VS18_1V8SUP (1 << 26) - -/* Driver definitions */ -#define MMCSD_SECTOR_SIZE 512 -#define MMC_CARD 0 -#define SD_CARD 1 -#define BYTE_MODE 0 -#define SECTOR_MODE 1 -#define CLK_INITSEQ 0 -#define CLK_400KHZ 1 -#define CLK_MISC 2 - -#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) -#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) - -/* Clock Configurations and Macros */ -#define MMC_CLOCK_REFERENCE 96 /* MHz */ - -#define mmc_reg_out(addr, mask, val)\ - writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) - -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max); - #endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h new file mode 100644 index 0000000000..55e9de6041 --- /dev/null +++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h @@ -0,0 +1,344 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated + * + * Nishant Kamat <nskamat@ti.com> + * Lokesh Vutla <lokeshvutla@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _MUX_DRA7XX_H_ +#define _MUX_DRA7XX_H_ + +#include <asm/types.h> + +#define IEN (1 << 18) +#define IDIS (0 << 18) + +#define PTU (3 << 16) +#define PTD (1 << 16) +#define PEN (1 << 16) +#define PDIS (0 << 16) + +#define WKEN (1 << 24) +#define WKDIS (0 << 24) + +#define M0 0 +#define M1 1 +#define M2 2 +#define M3 3 +#define M4 4 +#define M5 5 +#define M6 6 +#define M7 7 +#define M8 8 +#define M9 9 +#define M10 10 +#define M11 11 +#define M12 12 +#define M13 13 +#define M14 14 +#define M15 15 + +#define SAFE_MODE M15 + +#define GPMC_AD0 0x000 +#define GPMC_AD1 0x004 +#define GPMC_AD2 0x008 +#define GPMC_AD3 0x00C +#define GPMC_AD4 0x010 +#define GPMC_AD5 0x014 +#define GPMC_AD6 0x018 +#define GPMC_AD7 0x01C +#define GPMC_AD8 0x020 +#define GPMC_AD9 0x024 +#define GPMC_AD10 0x028 +#define GPMC_AD11 0x02C +#define GPMC_AD12 0x030 +#define GPMC_AD13 0x034 +#define GPMC_AD14 0x038 +#define GPMC_AD15 0x03C +#define GPMC_A0 0x040 +#define GPMC_A1 0x044 +#define GPMC_A2 0x048 +#define GPMC_A3 0x04C +#define GPMC_A4 0x050 +#define GPMC_A5 0x054 +#define GPMC_A6 0x058 +#define GPMC_A7 0x05C +#define GPMC_A8 0x060 +#define GPMC_A9 0x064 +#define GPMC_A10 0x068 +#define GPMC_A11 0x06C +#define GPMC_A12 0x070 +#define GPMC_A13 0x074 +#define GPMC_A14 0x078 +#define GPMC_A15 0x07C +#define GPMC_A16 0x080 +#define GPMC_A17 0x084 +#define GPMC_A18 0x088 +#define GPMC_A19 0x08C +#define GPMC_A20 0x090 +#define GPMC_A21 0x094 +#define GPMC_A22 0x098 +#define GPMC_A23 0x09C +#define GPMC_A24 0x0A0 +#define GPMC_A25 0x0A4 +#define GPMC_A26 0x0A8 +#define GPMC_A27 0x0AC +#define GPMC_CS1 0x0B0 +#define GPMC_CS0 0x0B4 +#define GPMC_CS2 0x0B8 +#define GPMC_CS3 0x0BC +#define GPMC_CLK 0x0C0 +#define GPMC_ADVN_ALE 0x0C4 +#define GPMC_OEN_REN 0x0C8 +#define GPMC_WEN 0x0CC +#define GPMC_BEN0 0x0D0 +#define GPMC_BEN1 0x0D4 +#define GPMC_WAIT0 0x0D8 +#define VIN1A_CLK0 0x0DC +#define VIN1B_CLK1 0x0E0 +#define VIN1A_DE0 0x0E4 +#define VIN1A_FLD0 0x0E8 +#define VIN1A_HSYNC0 0x0EC +#define VIN1A_VSYNC0 0x0F0 +#define VIN1A_D0 0x0F4 +#define VIN1A_D1 0x0F8 +#define VIN1A_D2 0x0FC +#define VIN1A_D3 0x100 +#define VIN1A_D4 0x104 +#define VIN1A_D5 0x108 +#define VIN1A_D6 0x10C +#define VIN1A_D7 0x110 +#define VIN1A_D8 0x114 +#define VIN1A_D9 0x118 +#define VIN1A_D10 0x11C +#define VIN1A_D11 0x120 +#define VIN1A_D12 0x124 +#define VIN1A_D13 0x128 +#define VIN1A_D14 0x12C +#define VIN1A_D15 0x130 +#define VIN1A_D16 0x134 +#define VIN1A_D17 0x138 +#define VIN1A_D18 0x13C +#define VIN1A_D19 0x140 +#define VIN1A_D20 0x144 +#define VIN1A_D21 0x148 +#define VIN1A_D22 0x14C +#define VIN1A_D23 0x150 +#define VIN2A_CLK0 0x154 +#define VIN2A_DE0 0x158 +#define VIN2A_FLD0 0x15C +#define VIN2A_HSYNC0 0x160 +#define VIN2A_VSYNC0 0x164 +#define VIN2A_D0 0x168 +#define VIN2A_D1 0x16C +#define VIN2A_D2 0x170 +#define VIN2A_D3 0x174 +#define VIN2A_D4 0x178 +#define VIN2A_D5 0x17C +#define VIN2A_D6 0x180 +#define VIN2A_D7 0x184 +#define VIN2A_D8 0x188 +#define VIN2A_D9 0x18C +#define VIN2A_D10 0x190 +#define VIN2A_D11 0x194 +#define VIN2A_D12 0x198 +#define VIN2A_D13 0x19C +#define VIN2A_D14 0x1A0 +#define VIN2A_D15 0x1A4 +#define VIN2A_D16 0x1A8 +#define VIN2A_D17 0x1AC +#define VIN2A_D18 0x1B0 +#define VIN2A_D19 0x1B4 +#define VIN2A_D20 0x1B8 +#define VIN2A_D21 0x1BC +#define VIN2A_D22 0x1C0 +#define VIN2A_D23 0x1C4 +#define VOUT1_CLK 0x1C8 +#define VOUT1_DE 0x1CC +#define VOUT1_FLD 0x1D0 +#define VOUT1_HSYNC 0x1D4 +#define VOUT1_VSYNC 0x1D8 +#define VOUT1_D0 0x1DC +#define VOUT1_D1 0x1E0 +#define VOUT1_D2 0x1E4 +#define VOUT1_D3 0x1E8 +#define VOUT1_D4 0x1EC +#define VOUT1_D5 0x1F0 +#define VOUT1_D6 0x1F4 +#define VOUT1_D7 0x1F8 +#define VOUT1_D8 0x1FC +#define VOUT1_D9 0x200 +#define VOUT1_D10 0x204 +#define VOUT1_D11 0x208 +#define VOUT1_D12 0x20C +#define VOUT1_D13 0x210 +#define VOUT1_D14 0x214 +#define VOUT1_D15 0x218 +#define VOUT1_D16 0x21C +#define VOUT1_D17 0x220 +#define VOUT1_D18 0x224 +#define VOUT1_D19 0x228 +#define VOUT1_D20 0x22C +#define VOUT1_D21 0x230 +#define VOUT1_D22 0x234 +#define VOUT1_D23 0x238 +#define MDIO_MCLK 0x23C +#define MDIO_D 0x240 +#define RMII_MHZ_50_CLK 0x244 +#define UART3_RXD 0x248 +#define UART3_TXD 0x24C +#define RGMII0_TXC 0x250 +#define RGMII0_TXCTL 0x254 +#define RGMII0_TXD3 0x258 +#define RGMII0_TXD2 0x25C +#define RGMII0_TXD1 0x260 +#define RGMII0_TXD0 0x264 +#define RGMII0_RXC 0x268 +#define RGMII0_RXCTL 0x26C +#define RGMII0_RXD3 0x270 +#define RGMII0_RXD2 0x274 +#define RGMII0_RXD1 0x278 +#define RGMII0_RXD0 0x27C +#define USB1_DRVVBUS 0x280 +#define USB2_DRVVBUS 0x284 +#define GPIO6_14 0x288 +#define GPIO6_15 0x28C +#define GPIO6_16 0x290 +#define XREF_CLK0 0x294 +#define XREF_CLK1 0x298 +#define XREF_CLK2 0x29C +#define XREF_CLK3 0x2A0 +#define MCASP1_ACLKX 0x2A4 +#define MCASP1_FSX 0x2A8 +#define MCASP1_ACLKR 0x2AC +#define MCASP1_FSR 0x2B0 +#define MCASP1_AXR0 0x2B4 +#define MCASP1_AXR1 0x2B8 +#define MCASP1_AXR2 0x2BC +#define MCASP1_AXR3 0x2C0 +#define MCASP1_AXR4 0x2C4 +#define MCASP1_AXR5 0x2C8 +#define MCASP1_AXR6 0x2CC +#define MCASP1_AXR7 0x2D0 +#define MCASP1_AXR8 0x2D4 +#define MCASP1_AXR9 0x2D8 +#define MCASP1_AXR10 0x2DC +#define MCASP1_AXR11 0x2E0 +#define MCASP1_AXR12 0x2E4 +#define MCASP1_AXR13 0x2E8 +#define MCASP1_AXR14 0x2EC +#define MCASP1_AXR15 0x2F0 +#define MCASP2_ACLKX 0x2F4 +#define MCASP2_FSX 0x2F8 +#define MCASP2_ACLKR 0x2FC +#define MCASP2_FSR 0x300 +#define MCASP2_AXR0 0x304 +#define MCASP2_AXR1 0x308 +#define MCASP2_AXR2 0x30C +#define MCASP2_AXR3 0x310 +#define MCASP2_AXR4 0x314 +#define MCASP2_AXR5 0x318 +#define MCASP2_AXR6 0x31C +#define MCASP2_AXR7 0x320 +#define MCASP3_ACLKX 0x324 +#define MCASP3_FSX 0x328 +#define MCASP3_AXR0 0x32C +#define MCASP3_AXR1 0x330 +#define MCASP4_ACLKX 0x334 +#define MCASP4_FSX 0x338 +#define MCASP4_AXR0 0x33C +#define MCASP4_AXR1 0x340 +#define MCASP5_ACLKX 0x344 +#define MCASP5_FSX 0x348 +#define MCASP5_AXR0 0x34C +#define MCASP5_AXR1 0x350 +#define MMC1_CLK 0x354 +#define MMC1_CMD 0x358 +#define MMC1_DAT0 0x35C +#define MMC1_DAT1 0x360 +#define MMC1_DAT2 0x364 +#define MMC1_DAT3 0x368 +#define MMC1_SDCD 0x36C +#define MMC1_SDWP 0x370 +#define GPIO6_10 0x374 +#define GPIO6_11 0x378 +#define MMC3_CLK 0x37C +#define MMC3_CMD 0x380 +#define MMC3_DAT0 0x384 +#define MMC3_DAT1 0x388 +#define MMC3_DAT2 0x38C +#define MMC3_DAT3 0x390 +#define MMC3_DAT4 0x394 +#define MMC3_DAT5 0x398 +#define MMC3_DAT6 0x39C +#define MMC3_DAT7 0x3A0 +#define SPI1_SCLK 0x3A4 +#define SPI1_D1 0x3A8 +#define SPI1_D0 0x3AC +#define SPI1_CS0 0x3B0 +#define SPI1_CS1 0x3B4 +#define SPI1_CS2 0x3B8 +#define SPI1_CS3 0x3BC +#define SPI2_SCLK 0x3C0 +#define SPI2_D1 0x3C4 +#define SPI2_D0 0x3C8 +#define SPI2_CS0 0x3CC +#define DCAN1_TX 0x3D0 +#define DCAN1_RX 0x3D4 +#define DCAN2_TX 0x3D8 +#define DCAN2_RX 0x3DC +#define UART1_RXD 0x3E0 +#define UART1_TXD 0x3E4 +#define UART1_CTSN 0x3E8 +#define UART1_RTSN 0x3EC +#define UART2_RXD 0x3F0 +#define UART2_TXD 0x3F4 +#define UART2_CTSN 0x3F8 +#define UART2_RTSN 0x3FC +#define I2C1_SDA 0x400 +#define I2C1_SCL 0x404 +#define I2C2_SDA 0x408 +#define I2C2_SCL 0x40C +#define I2C3_SDA 0x410 +#define I2C3_SCL 0x414 +#define WAKEUP0 0x418 +#define WAKEUP1 0x41C +#define WAKEUP2 0x420 +#define WAKEUP3 0x424 +#define ON_OFF 0x428 +#define RTC_PORZ 0x42C +#define TMS 0x430 +#define TDI 0x434 +#define TDO 0x438 +#define TCLK 0x43C +#define TRSTN 0x440 +#define RTCK 0x444 +#define EMU0 0x448 +#define EMU1 0x44C +#define EMU2 0x450 +#define EMU3 0x454 +#define EMU4 0x458 +#define RESETN 0x45C +#define NMIN 0x460 +#define RSTOUTN 0x464 + +#endif /* _MUX_DRA7XX_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/mux_omap5.h b/arch/arm/include/asm/arch-omap5/mux_omap5.h index 4a6ed8b455..34b0dbd063 100644 --- a/arch/arm/include/asm/arch-omap5/mux_omap5.h +++ b/arch/arm/include/asm/arch-omap5/mux_omap5.h @@ -28,14 +28,6 @@ #include <asm/types.h> -struct pad_conf_entry { - - u16 offset; - - u16 val; - -}; - #ifdef CONFIG_OFF_PADCONF #define OFF_PD (1 << 12) #define OFF_PU (3 << 12) diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 9dce49ac4b..b632635d3e 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -57,7 +57,10 @@ /* To be verified */ #define OMAP5430_CONTROL_ID_CODE_ES1_0 0x0B94202F +#define OMAP5430_CONTROL_ID_CODE_ES2_0 0x1B94202F #define OMAP5432_CONTROL_ID_CODE_ES1_0 0x0B99802F +#define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F +#define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F /* STD_FUSE_PROD_ID_1 */ #define STD_FUSE_PROD_ID_1 (CTRL_BASE + 0x218) @@ -131,87 +134,6 @@ struct s32ktimer { #define DEVICE_TYPE_MASK (0x7 << DEVICE_TYPE_SHIFT) #define DEVICE_GP 0x3 -struct omap_sys_ctrl_regs { - u32 pad0[77]; /* 0x4A002000 */ - u32 control_status; /* 0x4A002134 */ - u32 pad1[794]; /* 0x4A002138 */ - u32 control_paconf_global; /* 0x4A002DA0 */ - u32 control_paconf_mode; /* 0x4A002DA4 */ - u32 control_smart1io_padconf_0; /* 0x4A002DA8 */ - u32 control_smart1io_padconf_1; /* 0x4A002DAC */ - u32 control_smart1io_padconf_2; /* 0x4A002DB0 */ - u32 control_smart2io_padconf_0; /* 0x4A002DB4 */ - u32 control_smart2io_padconf_1; /* 0x4A002DB8 */ - u32 control_smart2io_padconf_2; /* 0x4A002DBC */ - u32 control_smart3io_padconf_0; /* 0x4A002DC0 */ - u32 control_smart3io_padconf_1; /* 0x4A002DC4 */ - u32 pad2[14]; - u32 control_pbias; /* 0x4A002E00 */ - u32 control_i2c_0; /* 0x4A002E04 */ - u32 control_camera_rx; /* 0x4A002E08 */ - u32 control_hdmi_tx_phy; /* 0x4A002E0C */ - u32 control_uniportm; /* 0x4A002E10 */ - u32 control_dsiphy; /* 0x4A002E14 */ - u32 control_mcbsplp; /* 0x4A002E18 */ - u32 control_usb2phycore; /* 0x4A002E1C */ - u32 control_hdmi_1; /*0x4A002E20*/ - u32 control_hsi; /*0x4A002E24*/ - u32 pad3[2]; - u32 control_ddr3ch1_0; /*0x4A002E30*/ - u32 control_ddr3ch2_0; /*0x4A002E34*/ - u32 control_ddrch1_0; /*0x4A002E38*/ - u32 control_ddrch1_1; /*0x4A002E3C*/ - u32 control_ddrch2_0; /*0x4A002E40*/ - u32 control_ddrch2_1; /*0x4A002E44*/ - u32 control_lpddr2ch1_0; /*0x4A002E48*/ - u32 control_lpddr2ch1_1; /*0x4A002E4C*/ - u32 control_ddrio_0; /*0x4A002E50*/ - u32 control_ddrio_1; /*0x4A002E54*/ - u32 control_ddrio_2; /*0x4A002E58*/ - u32 control_hyst_1; /*0x4A002E5C*/ - u32 control_usbb_hsic_control; /*0x4A002E60*/ - u32 control_c2c; /*0x4A002E64*/ - u32 control_core_control_spare_rw; /*0x4A002E68*/ - u32 control_core_control_spare_r; /*0x4A002E6C*/ - u32 control_core_control_spare_r_c0; /*0x4A002E70*/ - u32 control_srcomp_north_side; /*0x4A002E74*/ - u32 control_srcomp_south_side; /*0x4A002E78*/ - u32 control_srcomp_east_side; /*0x4A002E7C*/ - u32 control_srcomp_west_side; /*0x4A002E80*/ - u32 control_srcomp_code_latch; /*0x4A002E84*/ - u32 pad4[3679394]; - u32 control_port_emif1_sdram_config; /*0x4AE0C110*/ - u32 control_port_emif1_lpddr2_nvm_config; /*0x4AE0C114*/ - u32 control_port_emif2_sdram_config; /*0x4AE0C118*/ - u32 pad5[10]; - u32 control_emif1_sdram_config_ext; /* 0x4AE0C144 */ - u32 control_emif2_sdram_config_ext; /* 0x4AE0C148 */ - u32 pad6[789]; - u32 control_smart1nopmio_padconf_0; /* 0x4AE0CDA0 */ - u32 control_smart1nopmio_padconf_1; /* 0x4AE0CDA4 */ - u32 control_padconf_mode; /* 0x4AE0CDA8 */ - u32 control_xtal_oscillator; /* 0x4AE0CDAC */ - u32 control_i2c_2; /* 0x4AE0CDB0 */ - u32 control_ckobuffer; /* 0x4AE0CDB4 */ - u32 control_wkup_control_spare_rw; /* 0x4AE0CDB8 */ - u32 control_wkup_control_spare_r; /* 0x4AE0CDBC */ - u32 control_wkup_control_spare_r_c0; /* 0x4AE0CDC0 */ - u32 control_srcomp_east_side_wkup; /* 0x4AE0CDC4 */ - u32 control_efuse_1; /* 0x4AE0CDC8 */ - u32 control_efuse_2; /* 0x4AE0CDCC */ - u32 control_efuse_3; /* 0x4AE0CDD0 */ - u32 control_efuse_4; /* 0x4AE0CDD4 */ - u32 control_efuse_5; /* 0x4AE0CDD8 */ - u32 control_efuse_6; /* 0x4AE0CDDC */ - u32 control_efuse_7; /* 0x4AE0CDE0 */ - u32 control_efuse_8; /* 0x4AE0CDE4 */ - u32 control_efuse_9; /* 0x4AE0CDE8 */ - u32 control_efuse_10; /* 0x4AE0CDEC */ - u32 control_efuse_11; /* 0x4AE0CDF0 */ - u32 control_efuse_12; /* 0x4AE0CDF4 */ - u32 control_efuse_13; /* 0x4AE0CDF8 */ -}; - /* Output impedance control */ #define ds_120_ohm 0x0 #define ds_60_ohm 0x1 @@ -247,6 +169,12 @@ struct omap_sys_ctrl_regs { #define DDR_IO_1_VREF_CELLS_DDR3_VALUE 0xBC6318DC #define DDR_IO_2_VREF_CELLS_DDR3_VALUE 0x0 +#define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x7C7C7C7C +#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x64656465 +#define DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2 0xBAE8C631 +#define DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2 0xB46318D8 +#define DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2 0x84210000 + #define EFUSE_1 0x45145100 #define EFUSE_2 0x45145100 #define EFUSE_3 0x45145100 @@ -271,7 +199,11 @@ struct omap_sys_ctrl_regs { #define OMAP5_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4) #define OMAP5_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC) #define OMAP5_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) -#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x14) +#define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14) +#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18) +#define OMAP_SRAM_SCRATCH_VCORES_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x1C) +#define OMAP5_SRAM_SCRATCH_SYS_CTRL (SRAM_SCRATCH_SPACE_ADDR + 0x20) +#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x24) /* Silicon revisions */ #define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF @@ -298,7 +230,26 @@ struct omap_sys_ctrl_regs { #define CH_FLAGS_CHFLASH (0x1 << 2) #define CH_FLAGS_CHMMCSD (0x1 << 3) +/* CONTROL_SRCOMP_XXX_SIDE */ +#define OVERRIDE_XS_SHIFT 30 +#define OVERRIDE_XS_MASK (1 << 30) +#define SRCODE_READ_XS_SHIFT 12 +#define SRCODE_READ_XS_MASK (0xff << 12) +#define PWRDWN_XS_SHIFT 11 +#define PWRDWN_XS_MASK (1 << 11) +#define DIVIDE_FACTOR_XS_SHIFT 4 +#define DIVIDE_FACTOR_XS_MASK (0x7f << 4) +#define MULTIPLY_FACTOR_XS_SHIFT 1 +#define MULTIPLY_FACTOR_XS_MASK (0x7 << 1) +#define SRCODE_OVERRIDE_SEL_XS_SHIFT 0 +#define SRCODE_OVERRIDE_SEL_XS_MASK (1 << 0) + #ifndef __ASSEMBLY__ +struct srcomp_params { + s8 divide_factor; + s8 multiply_factor; +}; + struct omap_boot_parameters { char *boot_message; unsigned int mem_boot_descriptor; @@ -306,5 +257,15 @@ struct omap_boot_parameters { unsigned char reset_reason; unsigned char ch_flags; }; + +struct ctrl_ioregs { + u32 ctrl_ddrch; + u32 ctrl_lpddr2ch; + u32 ctrl_ddr3ch; + u32 ctrl_ddrio_0; + u32 ctrl_ddrio_1; + u32 ctrl_ddrio_2; + u32 ctrl_emif_sdram_config_ext; +}; #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h index d125c61f4c..323cd63551 100644 --- a/arch/arm/include/asm/arch-omap5/spl.h +++ b/arch/arm/include/asm/arch-omap5/spl.h @@ -27,7 +27,7 @@ #define BOOT_DEVICE_XIP 1 #define BOOT_DEVICE_XIPWAIT 2 #define BOOT_DEVICE_NAND 3 -#define BOOT_DEVICE_ONE_NAND 4 +#define BOOT_DEVICE_ONENAND 4 #define BOOT_DEVICE_MMC1 5 #define BOOT_DEVICE_MMC2 6 #define BOOT_DEVICE_MMC2_2 7 diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h index 72e9df7881..e66ab44341 100644 --- a/arch/arm/include/asm/arch-omap5/sys_proto.h +++ b/arch/arm/include/asm/arch-omap5/sys_proto.h @@ -25,9 +25,13 @@ #include <asm/io.h> #include <asm/arch/clocks.h> #include <asm/omap_common.h> -#include <asm/arch/mux_omap5.h> #include <asm/arch/clocks.h> +struct pad_conf_entry { + u32 offset; + u32 val; +}; + struct omap_sysinfo { char *board_string; }; @@ -44,7 +48,7 @@ u32 wait_on_value(u32, u32, void *, u32); void sdelay(unsigned long); void setup_clocks_for_console(void); void prcm_init(void); -void bypass_dpll(u32 *const base); +void bypass_dpll(u32 const base); void freq_update_core(void); u32 get_sys_clk_freq(void); u32 omap5_ddr_clk(void); @@ -58,6 +62,8 @@ void omap_vc_init(u16 speed_khz); int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data); u32 warm_reset(void); void force_emif_self_refresh(void); +void get_ioregs(const struct ctrl_ioregs **regs); +void srcomp_enable(void); /* * This is used to verify if the configuration header diff --git a/arch/arm/include/asm/arch-tegra/mmc.h b/arch/arm/include/asm/arch-tegra/mmc.h index 5c95047998..71ad407511 100644 --- a/arch/arm/include/asm/arch-tegra/mmc.h +++ b/arch/arm/include/asm/arch-tegra/mmc.h @@ -22,6 +22,6 @@ #ifndef _TEGRA_MMC_H_ #define _TEGRA_MMC_H_ -int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio); +void tegra_mmc_init(void); #endif /* _TEGRA_MMC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra/tegra_i2c.h b/arch/arm/include/asm/arch-tegra/tegra_i2c.h index 2650744718..853e59bb6e 100644 --- a/arch/arm/include/asm/arch-tegra/tegra_i2c.h +++ b/arch/arm/include/asm/arch-tegra/tegra_i2c.h @@ -105,6 +105,7 @@ struct i2c_ctlr { u32 sl_delay_count; /* 3C: I2C_I2C_SL_DELAY_COUNT */ u32 reserved_2[4]; /* 40: */ struct i2c_control control; /* 50 ~ 68 */ + u32 clk_div; /* 6C: I2C_I2C_CLOCK_DIVISOR */ }; /* bit fields definitions for IO Packet Header 1 format */ @@ -154,6 +155,11 @@ struct i2c_ctlr { #define I2C_INT_ARBITRATION_LOST_SHIFT 2 #define I2C_INT_ARBITRATION_LOST_MASK (1 << I2C_INT_ARBITRATION_LOST_SHIFT) +/* I2C_CLK_DIVISOR_REGISTER */ +#define CLK_DIV_STD_FAST_MODE 0x19 +#define CLK_DIV_HS_MODE 1 +#define CLK_MULT_STD_FAST_MODE 8 + /** * Returns the bus number of the DVC controller * diff --git a/arch/arm/include/asm/arch-tegra/tegra_mmc.h b/arch/arm/include/asm/arch-tegra/tegra_mmc.h index dd746cae0d..2a3f830cc5 100644 --- a/arch/arm/include/asm/arch-tegra/tegra_mmc.h +++ b/arch/arm/include/asm/arch-tegra/tegra_mmc.h @@ -22,10 +22,9 @@ #ifndef __TEGRA_MMC_H_ #define __TEGRA_MMC_H_ -#define TEGRA_SDMMC1_BASE 0xC8000000 -#define TEGRA_SDMMC2_BASE 0xC8000200 -#define TEGRA_SDMMC3_BASE 0xC8000400 -#define TEGRA_SDMMC4_BASE 0xC8000600 +#include <fdtdec.h> + +#define MAX_HOSTS 4 /* Max number of 'hosts'/controllers */ #ifndef __ASSEMBLY__ struct tegra_mmc { @@ -62,12 +61,30 @@ struct tegra_mmc { unsigned char admaerr; /* offset 54h */ unsigned char res4[3]; /* RESERVED, offset 55h-57h */ unsigned long admaaddr; /* offset 58h-5Fh */ - unsigned char res5[0x9c]; /* RESERVED, offset 60h-FBh */ + unsigned char res5[0xa0]; /* RESERVED, offset 60h-FBh */ unsigned short slotintstatus; /* offset FCh */ unsigned short hcver; /* HOST Version */ - unsigned char res6[0x100]; /* RESERVED, offset 100h-1FFh */ + unsigned int venclkctl; /* _VENDOR_CLOCK_CNTRL_0, 100h */ + unsigned int venspictl; /* _VENDOR_SPI_CNTRL_0, 104h */ + unsigned int venspiintsts; /* _VENDOR_SPI_INT_STATUS_0, 108h */ + unsigned int venceatactl; /* _VENDOR_CEATA_CNTRL_0, 10Ch */ + unsigned int venbootctl; /* _VENDOR_BOOT_CNTRL_0, 110h */ + unsigned int venbootacktout; /* _VENDOR_BOOT_ACK_TIMEOUT, 114h */ + unsigned int venbootdattout; /* _VENDOR_BOOT_DAT_TIMEOUT, 118h */ + unsigned int vendebouncecnt; /* _VENDOR_DEBOUNCE_COUNT_0, 11Ch */ + unsigned int venmiscctl; /* _VENDOR_MISC_CNTRL_0, 120h */ + unsigned int res6[47]; /* 0x124 ~ 0x1DC */ + unsigned int sdmemcmppadctl; /* _SDMEMCOMPPADCTRL_0, 1E0h */ + unsigned int autocalcfg; /* _AUTO_CAL_CONFIG_0, 1E4h */ + unsigned int autocalintval; /* _AUTO_CAL_INTERVAL_0, 1E8h */ + unsigned int autocalsts; /* _AUTO_CAL_STATUS_0, 1ECh */ }; +#define TEGRA_MMC_PWRCTL_SD_BUS_POWER (1 << 0) +#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V1_8 (5 << 1) +#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_0 (6 << 1) +#define TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_3 (7 << 1) + #define TEGRA_MMC_HOSTCTL_DMASEL_MASK (3 << 3) #define TEGRA_MMC_HOSTCTL_DMASEL_SDMA (0 << 3) #define TEGRA_MMC_HOSTCTL_DMASEL_ADMA2_32BIT (2 << 3) @@ -117,15 +134,26 @@ struct tegra_mmc { #define TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE (1 << 1) +/* SDMMC1/3 settings from section 24.6 of T30 TRM */ +#define MEMCOMP_PADCTRL_VREF 7 +#define AUTO_CAL_ENABLED (1 << 29) +#define AUTO_CAL_PD_OFFSET (0x70 << 8) +#define AUTO_CAL_PU_OFFSET (0x62 << 0) + struct mmc_host { struct tegra_mmc *reg; + int id; /* device id/number, 0-3 */ + int enabled; /* 1 to enable, 0 to disable */ + int width; /* Bus Width, 1, 4 or 8 */ + enum periph_id mmc_id; /* Peripheral ID: PERIPH_ID_... */ + struct fdt_gpio_state cd_gpio; /* Change Detect GPIO */ + struct fdt_gpio_state pwr_gpio; /* Power GPIO */ + struct fdt_gpio_state wp_gpio; /* Write Protect GPIO */ unsigned int version; /* SDHCI spec. version */ unsigned int clock; /* Current clock (MHz) */ - unsigned int base; /* Base address, SDMMC1/2/3/4 */ - enum periph_id mmc_id; /* Peripheral ID: PERIPH_ID_... */ - int pwr_gpio; /* Power GPIO */ - int cd_gpio; /* Change Detect GPIO */ }; +void pad_init_mmc(struct mmc_host *host); + #endif /* __ASSEMBLY__ */ #endif /* __TEGRA_MMC_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/usb.h b/arch/arm/include/asm/arch-tegra/usb.h index fdbd127e6c..ef6c089be2 100644 --- a/arch/arm/include/asm/arch-tegra20/usb.h +++ b/arch/arm/include/asm/arch-tegra/usb.h @@ -243,29 +243,7 @@ struct usb_ctlr { #define VBUS_VLD_STS (1 << 26) -/* Change the USB host port into host mode */ -void usb_set_host_mode(void); - /* Setup USB on the board */ int board_usb_init(const void *blob); -/** - * Start up the given port number (ports are numbered from 0 on each board). - * This returns values for the appropriate hccr and hcor addresses to use for - * USB EHCI operations. - * - * @param portnum port number to start - * @param hccr returns start address of EHCI HCCR registers - * @param hcor returns start address of EHCI HCOR registers - * @return 0 if ok, -1 on error (generally invalid port number) - */ -int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor); - -/** - * Stop the current port - * - * @return 0 if ok, -1 if no port was active - */ -int tegrausb_stop_port(int portnum); - #endif /* _TEGRA_USB_H_ */ diff --git a/arch/arm/include/asm/arch-tegra114/gp_padctrl.h b/arch/arm/include/asm/arch-tegra114/gp_padctrl.h index c538bdd052..1ef1a1484d 100644 --- a/arch/arm/include/asm/arch-tegra114/gp_padctrl.h +++ b/arch/arm/include/asm/arch-tegra114/gp_padctrl.h @@ -27,7 +27,7 @@ struct apb_misc_gp_ctlr { u32 emu_revid; /* 0x60: APB_MISC_GP_EMU_REVID */ u32 xactor_scratch; /* 0x64: APB_MISC_GP_XACTOR_SCRATCH */ u32 aocfg1; /* 0x68: APB_MISC_GP_AOCFG1PADCTRL */ - u32 aocfg2; /* 0x6c: APB_MISC_GP_AOCFG2PADCTRL */ + u32 aocfg2; /* 0x6C: APB_MISC_GP_AOCFG2PADCTRL */ u32 atcfg1; /* 0x70: APB_MISC_GP_ATCFG1PADCTRL */ u32 atcfg2; /* 0x74: APB_MISC_GP_ATCFG2PADCTRL */ u32 atcfg3; /* 0x78: APB_MISC_GP_ATCFG3PADCTRL */ @@ -35,25 +35,43 @@ struct apb_misc_gp_ctlr { u32 atcfg5; /* 0x80: APB_MISC_GP_ATCFG5PADCTRL */ u32 cdev1cfg; /* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */ u32 cdev2cfg; /* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */ - u32 csuscfg; /* 0x8C: APB_MISC_GP_CSUSCFGPADCTRL */ + u32 reserved1; /* 0x8C: */ u32 dap1cfg; /* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */ u32 dap2cfg; /* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */ u32 dap3cfg; /* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */ u32 dap4cfg; /* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */ u32 dbgcfg; /* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */ - u32 lcdcfg1; /* 0xA4: APB_MISC_GP_LCDCFG1PADCTRL */ - u32 lcdcfg2; /* 0xA8: APB_MISC_GP_LCDCFG2PADCTRL */ - u32 sdio2cfg; /* 0xAC: APB_MISC_GP_SDIO2CFGPADCTRL */ + u32 reserved2[3]; /* 0xA4 - 0xAC: */ u32 sdio3cfg; /* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */ u32 spicfg; /* 0xB4: APB_MISC_GP_SPICFGPADCTRL */ u32 uaacfg; /* 0xB8: APB_MISC_GP_UAACFGPADCTRL */ u32 uabcfg; /* 0xBC: APB_MISC_GP_UABCFGPADCTRL */ u32 uart2cfg; /* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */ u32 uart3cfg; /* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */ - u32 vicfg1; /* 0xC8: APB_MISC_GP_VICFG1PADCTRL */ - u32 vivttgen; /* 0xCC: APB_MISC_GP_VIVTTGENPADCTRL */ - u32 reserved1[7]; /* 0xD0-0xE8: */ + u32 reserved3[9]; /* 0xC8-0xE8: */ u32 sdio1cfg; /* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */ + u32 reserved4[3]; /* 0xF0-0xF8: */ + u32 ddccfg; /* 0xFC: APB_MISC_GP_DDCCFGPADCTRL */ + u32 gmacfg; /* 0x100: APB_MISC_GP_GMACFGPADCTRL */ + u32 reserved5[3]; /* 0x104-0x10C: */ + u32 gmecfg; /* 0x110: APB_MISC_GP_GMECFGPADCTRL */ + u32 gmfcfg; /* 0x114: APB_MISC_GP_GMFCFGPADCTRL */ + u32 gmgcfg; /* 0x118: APB_MISC_GP_GMGCFGPADCTRL */ + u32 gmhcfg; /* 0x11C: APB_MISC_GP_GMHCFGPADCTRL */ + u32 owrcfg; /* 0x120: APB_MISC_GP_OWRCFGPADCTRL */ + u32 uadcfg; /* 0x124: APB_MISC_GP_UADCFGPADCTRL */ + u32 reserved6; /* 0x128: */ + u32 dev3cfg; /* 0x12C: APB_MISC_GP_DEV3CFGPADCTRL */ + u32 reserved7[2]; /* 0x130 - 0x134: */ + u32 ceccfg; /* 0x138: APB_MISC_GP_CECCFGPADCTRL */ + u32 reserved8[22]; /* 0x13C - 0x190: */ + u32 atcfg6; /* 0x194: APB_MISC_GP_ATCFG6PADCTRL */ + u32 dap5cfg; /* 0x198: APB_MISC_GP_DAP5CFGPADCTRL */ + u32 vbuscfg; /* 0x19C: APB_MISC_GP_USBVBUSENCFGPADCTRL */ + u32 aocfg3; /* 0x1A0: APB_MISC_GP_AOCFG3PADCTRL */ + u32 hvccfg0; /* 0x1A4: APB_MISC_GP_HVCCFG0PADCTRL */ + u32 sdio4cfg; /* 0x1A8: APB_MISC_GP_SDIO4CFGPADCTRL */ + u32 aocfg0; /* 0x1AC: APB_MISC_GP_AOCFG0PADCTRL */ }; #endif /* _TEGRA114_GP_PADCTRL_H_ */ diff --git a/arch/arm/include/asm/arch-tegra114/pinmux.h b/arch/arm/include/asm/arch-tegra114/pinmux.h index fd2293039d..9c22c08b6e 100644 --- a/arch/arm/include/asm/arch-tegra114/pinmux.h +++ b/arch/arm/include/asm/arch-tegra114/pinmux.h @@ -50,72 +50,12 @@ enum pmux_pingrp { PINGRP_SDMMC1_DAT2, PINGRP_SDMMC1_DAT1, PINGRP_SDMMC1_DAT0, - PINGRP_GPIO_PV2, - PINGRP_GPIO_PV3, - PINGRP_CLK2_OUT, + PINGRP_CLK2_OUT = PINGRP_SDMMC1_DAT0 + 3, PINGRP_CLK2_REQ, - PINGRP_LCD_PWR1, - PINGRP_LCD_PWR2, - PINGRP_LCD_SDIN, - PINGRP_LCD_SDOUT, - PINGRP_LCD_WR_N, - PINGRP_LCD_CS0_N, - PINGRP_LCD_DC0, - PINGRP_LCD_SCK, - PINGRP_LCD_PWR0, - PINGRP_LCD_PCLK, - PINGRP_LCD_DE, - PINGRP_LCD_HSYNC, - PINGRP_LCD_VSYNC, - PINGRP_LCD_D0, - PINGRP_LCD_D1, - PINGRP_LCD_D2, - PINGRP_LCD_D3, - PINGRP_LCD_D4, - PINGRP_LCD_D5, - PINGRP_LCD_D6, - PINGRP_LCD_D7, - PINGRP_LCD_D8, - PINGRP_LCD_D9, - PINGRP_LCD_D10, - PINGRP_LCD_D11, - PINGRP_LCD_D12, - PINGRP_LCD_D13, - PINGRP_LCD_D14, - PINGRP_LCD_D15, - PINGRP_LCD_D16, - PINGRP_LCD_D17, - PINGRP_LCD_D18, - PINGRP_LCD_D19, - PINGRP_LCD_D20, - PINGRP_LCD_D21, - PINGRP_LCD_D22, - PINGRP_LCD_D23, - PINGRP_LCD_CS1_N, - PINGRP_LCD_M1, - PINGRP_LCD_DC1, - PINGRP_HDMI_INT, + PINGRP_HDMI_INT = PINGRP_CLK2_REQ + 41, PINGRP_DDC_SCL, PINGRP_DDC_SDA, - PINGRP_CRT_HSYNC, - PINGRP_CRT_VSYNC, - PINGRP_VI_D0, - PINGRP_VI_D1, - PINGRP_VI_D2, - PINGRP_VI_D3, - PINGRP_VI_D4, - PINGRP_VI_D5, - PINGRP_VI_D6, - PINGRP_VI_D7, - PINGRP_VI_D8, - PINGRP_VI_D9, - PINGRP_VI_D10, - PINGRP_VI_D11, - PINGRP_VI_PCLK, - PINGRP_VI_MCLK, - PINGRP_VI_VSYNC, - PINGRP_VI_HSYNC, - PINGRP_UART2_RXD, + PINGRP_UART2_RXD = PINGRP_DDC_SDA + 19, PINGRP_UART2_TXD, PINGRP_UART2_RTS_N, PINGRP_UART2_CTS_N, @@ -186,8 +126,7 @@ enum pmux_pingrp { PINGRP_SDMMC4_DAT5, PINGRP_SDMMC4_DAT6, PINGRP_SDMMC4_DAT7, - PINGRP_SDMMC4_RST_N, - PINGRP_CAM_MCLK, + PINGRP_CAM_MCLK = PINGRP_SDMMC4_DAT7 + 2, PINGRP_GPIO_PCC1, PINGRP_GPIO_PBB0, PINGRP_CAM_I2C_SCL, @@ -212,12 +151,7 @@ enum pmux_pingrp { PINGRP_KB_ROW8, PINGRP_KB_ROW9, PINGRP_KB_ROW10, - PINGRP_KB_ROW11, - PINGRP_KB_ROW12, - PINGRP_KB_ROW13, - PINGRP_KB_ROW14, - PINGRP_KB_ROW15, - PINGRP_KB_COL0, + PINGRP_KB_COL0 = PINGRP_KB_ROW10 + 6, PINGRP_KB_COL1, PINGRP_KB_COL2, PINGRP_KB_COL3, @@ -244,47 +178,30 @@ enum pmux_pingrp { PINGRP_DAP2_DIN, PINGRP_DAP2_DOUT, PINGRP_DAP2_SCLK, - PINGRP_SPI2_MOSI, - PINGRP_SPI2_MISO, - PINGRP_SPI2_CS0_N, - PINGRP_SPI2_SCK, - PINGRP_SPI1_MOSI, - PINGRP_SPI1_SCK, - PINGRP_SPI1_CS0_N, - PINGRP_SPI1_MISO, - PINGRP_SPI2_CS1_N, - PINGRP_SPI2_CS2_N, - PINGRP_SDMMC3_CLK, + PINGRP_DVFS_PWM, + PINGRP_GPIO_X1_AUD, + PINGRP_GPIO_X3_AUD, + PINGRP_DVFS_CLK, + PINGRP_GPIO_X4_AUD, + PINGRP_GPIO_X5_AUD, + PINGRP_GPIO_X6_AUD, + PINGRP_GPIO_X7_AUD, + PINGRP_SDMMC3_CLK = PINGRP_GPIO_X7_AUD + 3, PINGRP_SDMMC3_CMD, PINGRP_SDMMC3_DAT0, PINGRP_SDMMC3_DAT1, PINGRP_SDMMC3_DAT2, PINGRP_SDMMC3_DAT3, - PINGRP_SDMMC3_DAT4, - PINGRP_SDMMC3_DAT5, - PINGRP_SDMMC3_DAT6, - PINGRP_SDMMC3_DAT7, - PINGRP_PEX_L0_PRSNT_N, - PINGRP_PEX_L0_RST_N, - PINGRP_PEX_L0_CLKREQ_N, - PINGRP_PEX_WAKE_N, - PINGRP_PEX_L1_PRSNT_N, - PINGRP_PEX_L1_RST_N, - PINGRP_PEX_L1_CLKREQ_N, - PINGRP_PEX_L2_PRSNT_N, - PINGRP_PEX_L2_RST_N, - PINGRP_PEX_L2_CLKREQ_N, - PINGRP_HDMI_CEC, /* offset 0x33e0 */ + PINGRP_HDMI_CEC = PINGRP_SDMMC3_DAT3 + 15, /* offset 0x33e0 */ PINGRP_SDMMC1_WP_N, PINGRP_SDMMC3_CD_N, - PINGRP_SPI1_CS1_N, - PINGRP_SPI1_CS2_N, - PINGRP_USB_VBUS_EN0, /* offset 0x33f4 */ + PINGRP_GPIO_W2_AUD, + PINGRP_GPIO_W3_AUD, + PINGRP_USB_VBUS_EN0, /* offset 0x33f4 */ PINGRP_USB_VBUS_EN1, PINGRP_SDMMC3_CLK_LB_IN, PINGRP_SDMMC3_CLK_LB_OUT, - PINGRP_NAND_GMI_CLK_LB, - PINGRP_RESET_OUT_N, + PINGRP_RESET_OUT_N = PINGRP_SDMMC3_CLK_LB_OUT + 2, PINGRP_COUNT, }; @@ -298,41 +215,35 @@ enum pdrive_pingrp { PDRIVE_PINGROUP_AT5, PDRIVE_PINGROUP_CDEV1, PDRIVE_PINGROUP_CDEV2, - PDRIVE_PINGROUP_CSUS, - PDRIVE_PINGROUP_DAP1, + PDRIVE_PINGROUP_DAP1 = 10, /* offset 0x890 */ PDRIVE_PINGROUP_DAP2, PDRIVE_PINGROUP_DAP3, PDRIVE_PINGROUP_DAP4, PDRIVE_PINGROUP_DBG, - PDRIVE_PINGROUP_LCD1, - PDRIVE_PINGROUP_LCD2, - PDRIVE_PINGROUP_SDIO2, - PDRIVE_PINGROUP_SDIO3, + PDRIVE_PINGROUP_SDIO3 = 18, /* offset 0x8B0 */ PDRIVE_PINGROUP_SPI, PDRIVE_PINGROUP_UAA, PDRIVE_PINGROUP_UAB, PDRIVE_PINGROUP_UART2, PDRIVE_PINGROUP_UART3, - PDRIVE_PINGROUP_VI1 = 24, /* offset 0x8c8 */ - PDRIVE_PINGROUP_SDIO1 = 33, /* offset 0x8ec */ - PDRIVE_PINGROUP_CRT = 36, /* offset 0x8f8 */ - PDRIVE_PINGROUP_DDC, + PDRIVE_PINGROUP_SDIO1 = 33, /* offset 0x8EC */ + PDRIVE_PINGROUP_DDC = 37, /* offset 0x8FC */ PDRIVE_PINGROUP_GMA, - PDRIVE_PINGROUP_GMB, - PDRIVE_PINGROUP_GMC, - PDRIVE_PINGROUP_GMD, - PDRIVE_PINGROUP_GME, + PDRIVE_PINGROUP_GME = 42, /* offset 0x910 */ PDRIVE_PINGROUP_GMF, PDRIVE_PINGROUP_GMG, PDRIVE_PINGROUP_GMH, PDRIVE_PINGROUP_OWR, PDRIVE_PINGROUP_UAD, - PDRIVE_PINGROUP_GPV, PDRIVE_PINGROUP_DEV3 = 49, /* offset 0x92c */ PDRIVE_PINGROUP_CEC = 52, /* offset 0x938 */ - PDRIVE_PINGROUP_AT6, + PDRIVE_PINGROUP_AT6 = 75, /* offset 0x994 */ PDRIVE_PINGROUP_DAP5, PDRIVE_PINGROUP_VBUS, + PDRIVE_PINGROUP_AO3, + PDRIVE_PINGROUP_HVC, + PDRIVE_PINGROUP_SDIO4, + PDRIVE_PINGROUP_AO0, PDRIVE_PINGROUP_COUNT, }; @@ -401,6 +312,7 @@ enum pmux_func { PMUX_FUNC_VI, PMUX_FUNC_VI_SENSOR_CLK, PMUX_FUNC_XIO, + /* End of Tegra2 MUX selectors */ PMUX_FUNC_BLINK, PMUX_FUNC_CEC, PMUX_FUNC_CLK12, @@ -444,7 +356,7 @@ enum pmux_func { PMUX_FUNC_VGP4, PMUX_FUNC_VGP5, PMUX_FUNC_VGP6, - + /* End of Tegra3 MUX selectors */ PMUX_FUNC_USB, PMUX_FUNC_SOC, PMUX_FUNC_CPU, @@ -453,10 +365,12 @@ enum pmux_func { PMUX_FUNC_PMI, PMUX_FUNC_CLDVFS, PMUX_FUNC_RESET_OUT_N, + /* End of Tegra114 MUX selectors */ PMUX_FUNC_SAFE, PMUX_FUNC_MAX, + PMUX_FUNC_INVALID = 0x4000, PMUX_FUNC_RSVD1 = 0x8000, PMUX_FUNC_RSVD2 = 0x8001, PMUX_FUNC_RSVD3 = 0x8002, @@ -492,6 +406,7 @@ enum pmux_tristate { enum pmux_pin_io { PMUX_PIN_OUTPUT = 0, PMUX_PIN_INPUT = 1, + PMUX_PIN_NONE, }; /* return 1 if a pin_io_is in range */ #define pmux_pin_io_isvalid(io) (((io) >= PMUX_PIN_OUTPUT) && \ @@ -525,6 +440,16 @@ enum pmux_pin_ioreset { (((ioreset) >= PMUX_PIN_IO_RESET_DEFAULT) && \ ((ioreset) <= PMUX_PIN_IO_RESET_ENABLE)) +enum pmux_pin_rcv_sel { + PMUX_PIN_RCV_SEL_DEFAULT = 0, + PMUX_PIN_RCV_SEL_NORMAL, + PMUX_PIN_RCV_SEL_HIGH, +}; +/* return 1 if a pin_rcv_sel_is in range */ +#define pmux_pin_rcv_sel_isvalid(rcv_sel) \ + (((rcv_sel) >= PMUX_PIN_RCV_SEL_DEFAULT) && \ + ((rcv_sel) <= PMUX_PIN_RCV_SEL_HIGH)) + /* Available power domains used by pin groups */ enum pmux_vddio { PMUX_VDDIO_BB = 0, @@ -546,10 +471,73 @@ enum pmux_vddio { PMUX_VDDIO_NONE }; -/* T114 pin drive group and pin mux registers */ -#define PDRIVE_PINGROUP_OFFSET (0x868 >> 2) -#define PMUX_OFFSET ((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \ - PDRIVE_PINGROUP_COUNT) +#define PGRP_SLWF_NONE -1 +#define PGRP_SLWF_MAX 3 +#define PGRP_SLWR_NONE PGRP_SLWF_NONE +#define PGRP_SLWR_MAX PGRP_SLWF_MAX + +#define PGRP_DRVUP_NONE -1 +#define PGRP_DRVUP_MAX 127 +#define PGRP_DRVDN_NONE PGRP_DRVUP_NONE +#define PGRP_DRVDN_MAX PGRP_DRVUP_MAX + +#define PGRP_SCHMT_NONE -1 +#define PGRP_HSM_NONE PGRP_SCHMT_NONE + +/* return 1 if a padgrp is in range */ +#define pmux_padgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PDRIVE_PINGROUP_COUNT)) + +/* return 1 if a slew-rate rising/falling edge value is in range */ +#define pmux_pad_slw_isvalid(slw) (((slw) == PGRP_SLWF_NONE) || \ + (((slw) >= 0) && ((slw) <= PGRP_SLWF_MAX))) + +/* return 1 if a driver output pull-up/down strength code value is in range */ +#define pmux_pad_drv_isvalid(drv) (((drv) == PGRP_DRVUP_NONE) || \ + (((drv) >= 0) && ((drv) <= PGRP_DRVUP_MAX))) + +/* return 1 if a low-power mode value is in range */ +#define pmux_pad_lpmd_isvalid(lpm) (((lpm) == PGRP_LPMD_NONE) || \ + (((lpm) >= 0) && ((lpm) <= PGRP_LPMD_X))) + +/* Defines a pin group cfg's low-power mode select */ +enum pgrp_lpmd { + PGRP_LPMD_X8 = 0, + PGRP_LPMD_X4, + PGRP_LPMD_X2, + PGRP_LPMD_X, + PGRP_LPMD_NONE = -1, +}; + +/* Defines whether a pin group cfg's schmidt is enabled or not */ +enum pgrp_schmt { + PGRP_SCHMT_DISABLE = 0, + PGRP_SCHMT_ENABLE = 1, +}; + +/* Defines whether a pin group cfg's high-speed mode is enabled or not */ +enum pgrp_hsm { + PGRP_HSM_DISABLE = 0, + PGRP_HSM_ENABLE = 1, +}; + +/* + * This defines the configuration for a pin group's pad control config + */ +struct padctrl_config { + enum pdrive_pingrp padgrp; /* pin group PDRIVE_PINGRP_x */ + int slwf; /* falling edge slew */ + int slwr; /* rising edge slew */ + int drvup; /* pull-up drive strength */ + int drvdn; /* pull-down drive strength */ + enum pgrp_lpmd lpmd; /* low-power mode selection */ + enum pgrp_schmt schmt; /* schmidt enable */ + enum pgrp_hsm hsm; /* high-speed mode enable */ +}; + +/* t114 pin drive group and pin mux registers */ +#define PDRIVE_PINGROUP_OFFSET (0x868 >> 2) +#define PMUX_OFFSET ((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \ + PDRIVE_PINGROUP_COUNT) struct pmux_tri_ctlr { uint pmt_reserved0; /* ABP_MISC_PP_ reserved offset 00 */ uint pmt_reserved1; /* ABP_MISC_PP_ reserved offset 04 */ @@ -581,6 +569,8 @@ struct pingroup_config { enum pmux_pin_lock lock; /* lock enable/disable PMUX_PIN... */ enum pmux_pin_od od; /* open-drain or push-pull driver */ enum pmux_pin_ioreset ioreset; /* input/output reset PMUX_PIN... */ + enum pmux_pin_rcv_sel rcv_sel; /* select between High and Normal */ + /* VIL/VIH receivers */ }; /* Set a pin group to tristate */ @@ -615,4 +605,12 @@ void pinmux_config_table(struct pingroup_config *config, int len); /* Set a group of pins from a table */ void pinmux_init(void); -#endif /* _TEGRA114_PINMUX_H_ */ +/** + * Set the GP pad configs + * + * @param config List of config items + * @param len Number of config items in list + */ +void padgrp_config_table(struct padctrl_config *config, int len); + +#endif /* _TEGRA114_PINMUX_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/tegra.h b/arch/arm/include/asm/arch-tegra20/tegra.h index e1de0447ff..ad5c01d1f4 100644 --- a/arch/arm/include/asm/arch-tegra20/tegra.h +++ b/arch/arm/include/asm/arch-tegra20/tegra.h @@ -29,7 +29,6 @@ #include <asm/arch-tegra/tegra.h> #define TEGRA_USB1_BASE 0xC5000000 -#define TEGRA_USB3_BASE 0xC5008000 #define BCT_ODMDATA_OFFSET 4068 /* 12 bytes from end of BCT */ diff --git a/arch/arm/include/asm/arch-tegra30/gp_padctrl.h b/arch/arm/include/asm/arch-tegra30/gp_padctrl.h index 9b383d0e74..23d184f2dd 100644 --- a/arch/arm/include/asm/arch-tegra30/gp_padctrl.h +++ b/arch/arm/include/asm/arch-tegra30/gp_padctrl.h @@ -56,4 +56,10 @@ struct apb_misc_gp_ctlr { u32 sdio1cfg; /* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */ }; +/* SDMMC1/3 settings from section 24.6 of T30 TRM */ +#define SDIOCFG_DRVUP_SLWF 1 +#define SDIOCFG_DRVDN_SLWR 1 +#define SDIOCFG_DRVUP 0x2E +#define SDIOCFG_DRVDN 0x2A + #endif /* _TEGRA30_GP_PADCTRL_H_ */ diff --git a/arch/arm/include/asm/arch-tegra30/pinmux.h b/arch/arm/include/asm/arch-tegra30/pinmux.h index 341951bfcb..a9e1b462c4 100644 --- a/arch/arm/include/asm/arch-tegra30/pinmux.h +++ b/arch/arm/include/asm/arch-tegra30/pinmux.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -531,6 +531,63 @@ enum pmux_vddio { PMUX_VDDIO_NONE }; +#define PGRP_SLWF_NONE -1 +#define PGRP_SLWF_MAX 3 +#define PGRP_SLWR_NONE PGRP_SLWF_NONE +#define PGRP_SLWR_MAX PGRP_SLWF_MAX + +#define PGRP_DRVUP_NONE -1 +#define PGRP_DRVUP_MAX 127 +#define PGRP_DRVDN_NONE PGRP_DRVUP_NONE +#define PGRP_DRVDN_MAX PGRP_DRVUP_MAX + +/* return 1 if a padgrp is in range */ +#define pmux_padgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PDRIVE_PINGROUP_COUNT)) + +/* return 1 if a slew-rate rising/falling edge value is in range */ +#define pmux_pad_slw_isvalid(slw) (((slw) >= 0) && ((slw) <= PGRP_SLWF_MAX)) + +/* return 1 if a driver output pull-up/down strength code value is in range */ +#define pmux_pad_drv_isvalid(drv) (((drv) >= 0) && ((drv) <= PGRP_DRVUP_MAX)) + +/* return 1 if a low-power mode value is in range */ +#define pmux_pad_lpmd_isvalid(lpm) (((lpm) >= 0) && ((lpm) <= PGRP_LPMD_X)) + +/* Defines a pin group cfg's low-power mode select */ +enum pgrp_lpmd { + PGRP_LPMD_X8 = 0, + PGRP_LPMD_X4, + PGRP_LPMD_X2, + PGRP_LPMD_X, + PGRP_LPMD_NONE = -1, +}; + +/* Defines whether a pin group cfg's schmidt is enabled or not */ +enum pgrp_schmt { + PGRP_SCHMT_DISABLE = 0, + PGRP_SCHMT_ENABLE = 1, +}; + +/* Defines whether a pin group cfg's high-speed mode is enabled or not */ +enum pgrp_hsm { + PGRP_HSM_DISABLE = 0, + PGRP_HSM_ENABLE = 1, +}; + +/* + * This defines the configuration for a pin group's pad control config + */ +struct padctrl_config { + enum pdrive_pingrp padgrp; /* pin group PDRIVE_PINGRP_x */ + int slwf; /* falling edge slew */ + int slwr; /* rising edge slew */ + int drvup; /* pull-up drive strength */ + int drvdn; /* pull-down drive strength */ + enum pgrp_lpmd lpmd; /* low-power mode selection */ + enum pgrp_schmt schmt; /* schmidt enable */ + enum pgrp_hsm hsm; /* high-speed mode enable */ +}; + /* t30 pin drive group and pin mux registers */ #define PDRIVE_PINGROUP_OFFSET (0x868 >> 2) #define PMUX_OFFSET ((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \ @@ -600,4 +657,12 @@ void pinmux_config_table(struct pingroup_config *config, int len); /* Set a group of pins from a table */ void pinmux_init(void); +/** + * Set the GP pad configs + * + * @param config List of config items + * @param len Number of config items in list + */ +void padgrp_config_table(struct padctrl_config *config, int len); + #endif /* _TEGRA30_PINMUX_H_ */ diff --git a/arch/arm/include/asm/arch-tegra30/tegra.h b/arch/arm/include/asm/arch-tegra30/tegra.h index decf564d13..c02c5d8500 100644 --- a/arch/arm/include/asm/arch-tegra30/tegra.h +++ b/arch/arm/include/asm/arch-tegra30/tegra.h @@ -21,6 +21,8 @@ #include <asm/arch-tegra/tegra.h> +#define TEGRA_USB1_BASE 0x7D000000 + #define BCT_ODMDATA_OFFSET 6116 /* 12 bytes from end of BCT */ #define MAX_NUM_CPU 4 diff --git a/arch/arm/include/asm/arch-zynq/hardware.h b/arch/arm/include/asm/arch-zynq/hardware.h new file mode 100644 index 0000000000..d0c69da971 --- /dev/null +++ b/arch/arm/include/asm/arch-zynq/hardware.h @@ -0,0 +1,85 @@ +/* + * Copyright (c) 2013 Xilinx Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ASM_ARCH_HARDWARE_H +#define _ASM_ARCH_HARDWARE_H + +#define XPSS_SYS_CTRL_BASEADDR 0xF8000000 +#define XPSS_DEV_CFG_APB_BASEADDR 0xF8007000 +#define XPSS_SCU_BASEADDR 0xF8F00000 + +/* Reflect slcr offsets */ +struct slcr_regs { + u32 scl; /* 0x0 */ + u32 slcr_lock; /* 0x4 */ + u32 slcr_unlock; /* 0x8 */ + u32 reserved1[125]; + u32 pss_rst_ctrl; /* 0x200 */ + u32 reserved2[15]; + u32 fpga_rst_ctrl; /* 0x240 */ + u32 reserved3[5]; + u32 reboot_status; /* 0x258 */ + u32 boot_mode; /* 0x25c */ + u32 reserved4[116]; + u32 trust_zone; /* 0x430 */ /* FIXME */ + u32 reserved5[115]; + u32 ddr_urgent; /* 0x600 */ + u32 reserved6[6]; + u32 ddr_urgent_sel; /* 0x61c */ + u32 reserved7[188]; + u32 ocm_cfg; /* 0x910 */ +}; + +#define slcr_base ((struct slcr_regs *) XPSS_SYS_CTRL_BASEADDR) + +struct devcfg_regs { + u32 ctrl; /* 0x0 */ + u32 lock; /* 0x4 */ + u32 cfg; /* 0x8 */ + u32 int_sts; /* 0xc */ + u32 int_mask; /* 0x10 */ + u32 status; /* 0x14 */ + u32 dma_src_addr; /* 0x18 */ + u32 dma_dst_addr; /* 0x1c */ + u32 dma_src_len; /* 0x20 */ + u32 dma_dst_len; /* 0x24 */ + u32 rom_shadow; /* 0x28 */ + u32 reserved1[2]; + u32 unlock; /* 0x34 */ + u32 reserved2[18]; + u32 mctrl; /* 0x80 */ + u32 reserved3; + u32 write_count; /* 0x88 */ + u32 read_count; /* 0x8c */ +}; + +#define devcfg_base ((struct devcfg_regs *) XPSS_DEV_CFG_APB_BASEADDR) + +struct scu_regs { + u32 reserved1[16]; + u32 filter_start; /* 0x40 */ + u32 filter_end; /* 0x44 */ +}; + +#define scu_base ((struct scu_regs *) XPSS_SCU_BASEADDR) + +#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-zynq/sys_proto.h b/arch/arm/include/asm/arch-zynq/sys_proto.h new file mode 100644 index 0000000000..e78890011a --- /dev/null +++ b/arch/arm/include/asm/arch-zynq/sys_proto.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2013 Xilinx Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SYS_PROTO_H_ +#define _SYS_PROTO_H_ + +extern void zynq_slcr_lock(void); +extern void zynq_slcr_unlock(void); +extern void zynq_slcr_cpu_reset(void); + +#endif /* _SYS_PROTO_H_ */ diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h index ad9a875de5..a73630bc4d 100644 --- a/arch/arm/include/asm/armv7.h +++ b/arch/arm/include/asm/armv7.h @@ -33,6 +33,7 @@ /* Cortex-A15 revisions */ #define MIDR_CORTEX_A15_R0P0 0x410FC0F0 +#define MIDR_CORTEX_A15_R2P2 0x412FC0F2 /* CCSIDR */ #define CCSIDR_LINE_SIZE_OFFSET 0 diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index ed251ec8ec..c5d1e6c837 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -519,6 +519,7 @@ #define SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES 0x0000C1A7 #define SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES 0x000001A7 +#define SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES_ES2 0x0000C1C7 /* DMM */ #define DMM_BASE 0x4E000040 @@ -696,11 +697,9 @@ struct dmm_lisa_map_regs { u32 dmm_lisa_map_1; u32 dmm_lisa_map_2; u32 dmm_lisa_map_3; + u8 is_ma_present; }; -extern const u32 ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG]; -extern const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG]; - #define CS0 0 #define CS1 1 /* The maximum frequency at which the LPDDR2 interface can operate in Hz*/ @@ -1027,6 +1026,11 @@ extern const u32 ddr3_ext_phy_ctrl_const_base[EMIF_EXT_PHY_CTRL_CONST_REG]; #define MR8_IO_WIDTH_SHIFT 0x6 #define MR8_IO_WIDTH_MASK (0x3 << 0x6) +/* SDRAM TYPE */ +#define EMIF_SDRAM_TYPE_DDR2 0x2 +#define EMIF_SDRAM_TYPE_DDR3 0x3 +#define EMIF_SDRAM_TYPE_LPDDR2 0x4 + struct lpddr2_addressing { u8 num_banks; u8 t_REFI_us_x10; @@ -1129,6 +1133,14 @@ struct emif_regs { u32 emif_rd_wr_exec_thresh; }; +struct lpddr2_mr_regs { + s8 mr1; + s8 mr2; + s8 mr3; + s8 mr10; + s8 mr16; +}; + /* assert macros */ #if defined(DEBUG) #define emif_assert(c) ({ if (!(c)) for (;;); }) @@ -1148,6 +1160,7 @@ void emif_get_device_timings(u32 emif_nr, #endif void do_ext_phy_settings(u32 base, const struct emif_regs *regs); +void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs); #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS extern u32 *const T_num; @@ -1156,4 +1169,5 @@ extern u32 *const emif_sizes; #endif void config_data_eye_leveling_samples(u32 emif_base); +u32 emif_sdram_type(void); #endif diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 2a40b898e3..091ddb508d 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -25,6 +25,524 @@ #ifndef _OMAP_COMMON_H_ #define _OMAP_COMMON_H_ +#include <common.h> + +#define NUM_SYS_CLKS 8 + +struct prcm_regs { + /* cm1.ckgen */ + u32 cm_clksel_core; + u32 cm_clksel_abe; + u32 cm_dll_ctrl; + u32 cm_clkmode_dpll_core; + u32 cm_idlest_dpll_core; + u32 cm_autoidle_dpll_core; + u32 cm_clksel_dpll_core; + u32 cm_div_m2_dpll_core; + u32 cm_div_m3_dpll_core; + u32 cm_div_h11_dpll_core; + u32 cm_div_h12_dpll_core; + u32 cm_div_h13_dpll_core; + u32 cm_div_h14_dpll_core; + u32 cm_div_h21_dpll_core; + u32 cm_div_h24_dpll_core; + u32 cm_ssc_deltamstep_dpll_core; + u32 cm_ssc_modfreqdiv_dpll_core; + u32 cm_emu_override_dpll_core; + u32 cm_div_h22_dpllcore; + u32 cm_div_h23_dpll_core; + u32 cm_clkmode_dpll_mpu; + u32 cm_idlest_dpll_mpu; + u32 cm_autoidle_dpll_mpu; + u32 cm_clksel_dpll_mpu; + u32 cm_div_m2_dpll_mpu; + u32 cm_ssc_deltamstep_dpll_mpu; + u32 cm_ssc_modfreqdiv_dpll_mpu; + u32 cm_bypclk_dpll_mpu; + u32 cm_clkmode_dpll_iva; + u32 cm_idlest_dpll_iva; + u32 cm_autoidle_dpll_iva; + u32 cm_clksel_dpll_iva; + u32 cm_div_h11_dpll_iva; + u32 cm_div_h12_dpll_iva; + u32 cm_ssc_deltamstep_dpll_iva; + u32 cm_ssc_modfreqdiv_dpll_iva; + u32 cm_bypclk_dpll_iva; + u32 cm_clkmode_dpll_abe; + u32 cm_idlest_dpll_abe; + u32 cm_autoidle_dpll_abe; + u32 cm_clksel_dpll_abe; + u32 cm_div_m2_dpll_abe; + u32 cm_div_m3_dpll_abe; + u32 cm_ssc_deltamstep_dpll_abe; + u32 cm_ssc_modfreqdiv_dpll_abe; + u32 cm_clkmode_dpll_ddrphy; + u32 cm_idlest_dpll_ddrphy; + u32 cm_autoidle_dpll_ddrphy; + u32 cm_clksel_dpll_ddrphy; + u32 cm_div_m2_dpll_ddrphy; + u32 cm_div_h11_dpll_ddrphy; + u32 cm_div_h12_dpll_ddrphy; + u32 cm_div_h13_dpll_ddrphy; + u32 cm_ssc_deltamstep_dpll_ddrphy; + u32 cm_clkmode_dpll_dsp; + u32 cm_shadow_freq_config1; + u32 cm_mpu_mpu_clkctrl; + + /* cm1.dsp */ + u32 cm_dsp_clkstctrl; + u32 cm_dsp_dsp_clkctrl; + + /* cm1.abe */ + u32 cm1_abe_clkstctrl; + u32 cm1_abe_l4abe_clkctrl; + u32 cm1_abe_aess_clkctrl; + u32 cm1_abe_pdm_clkctrl; + u32 cm1_abe_dmic_clkctrl; + u32 cm1_abe_mcasp_clkctrl; + u32 cm1_abe_mcbsp1_clkctrl; + u32 cm1_abe_mcbsp2_clkctrl; + u32 cm1_abe_mcbsp3_clkctrl; + u32 cm1_abe_slimbus_clkctrl; + u32 cm1_abe_timer5_clkctrl; + u32 cm1_abe_timer6_clkctrl; + u32 cm1_abe_timer7_clkctrl; + u32 cm1_abe_timer8_clkctrl; + u32 cm1_abe_wdt3_clkctrl; + + /* cm2.ckgen */ + u32 cm_clksel_mpu_m3_iss_root; + u32 cm_clksel_usb_60mhz; + u32 cm_scale_fclk; + u32 cm_core_dvfs_perf1; + u32 cm_core_dvfs_perf2; + u32 cm_core_dvfs_perf3; + u32 cm_core_dvfs_perf4; + u32 cm_core_dvfs_current; + u32 cm_iva_dvfs_perf_tesla; + u32 cm_iva_dvfs_perf_ivahd; + u32 cm_iva_dvfs_perf_abe; + u32 cm_iva_dvfs_current; + u32 cm_clkmode_dpll_per; + u32 cm_idlest_dpll_per; + u32 cm_autoidle_dpll_per; + u32 cm_clksel_dpll_per; + u32 cm_div_m2_dpll_per; + u32 cm_div_m3_dpll_per; + u32 cm_div_h11_dpll_per; + u32 cm_div_h12_dpll_per; + u32 cm_div_h13_dpll_per; + u32 cm_div_h14_dpll_per; + u32 cm_ssc_deltamstep_dpll_per; + u32 cm_ssc_modfreqdiv_dpll_per; + u32 cm_emu_override_dpll_per; + u32 cm_clkmode_dpll_usb; + u32 cm_idlest_dpll_usb; + u32 cm_autoidle_dpll_usb; + u32 cm_clksel_dpll_usb; + u32 cm_div_m2_dpll_usb; + u32 cm_ssc_deltamstep_dpll_usb; + u32 cm_ssc_modfreqdiv_dpll_usb; + u32 cm_clkdcoldo_dpll_usb; + u32 cm_clkmode_dpll_pcie_ref; + u32 cm_clkmode_apll_pcie; + u32 cm_idlest_apll_pcie; + u32 cm_div_m2_apll_pcie; + u32 cm_clkvcoldo_apll_pcie; + u32 cm_clkmode_dpll_unipro; + u32 cm_idlest_dpll_unipro; + u32 cm_autoidle_dpll_unipro; + u32 cm_clksel_dpll_unipro; + u32 cm_div_m2_dpll_unipro; + u32 cm_ssc_deltamstep_dpll_unipro; + u32 cm_ssc_modfreqdiv_dpll_unipro; + + /* cm2.core */ + u32 cm_coreaon_bandgap_clkctrl; + u32 cm_coreaon_io_srcomp_clkctrl; + u32 cm_l3_1_clkstctrl; + u32 cm_l3_1_dynamicdep; + u32 cm_l3_1_l3_1_clkctrl; + u32 cm_l3_2_clkstctrl; + u32 cm_l3_2_dynamicdep; + u32 cm_l3_2_l3_2_clkctrl; + u32 cm_l3_gpmc_clkctrl; + u32 cm_l3_2_ocmc_ram_clkctrl; + u32 cm_mpu_m3_clkstctrl; + u32 cm_mpu_m3_staticdep; + u32 cm_mpu_m3_dynamicdep; + u32 cm_mpu_m3_mpu_m3_clkctrl; + u32 cm_sdma_clkstctrl; + u32 cm_sdma_staticdep; + u32 cm_sdma_dynamicdep; + u32 cm_sdma_sdma_clkctrl; + u32 cm_memif_clkstctrl; + u32 cm_memif_dmm_clkctrl; + u32 cm_memif_emif_fw_clkctrl; + u32 cm_memif_emif_1_clkctrl; + u32 cm_memif_emif_2_clkctrl; + u32 cm_memif_dll_clkctrl; + u32 cm_memif_emif_h1_clkctrl; + u32 cm_memif_emif_h2_clkctrl; + u32 cm_memif_dll_h_clkctrl; + u32 cm_c2c_clkstctrl; + u32 cm_c2c_staticdep; + u32 cm_c2c_dynamicdep; + u32 cm_c2c_sad2d_clkctrl; + u32 cm_c2c_modem_icr_clkctrl; + u32 cm_c2c_sad2d_fw_clkctrl; + u32 cm_l4cfg_clkstctrl; + u32 cm_l4cfg_dynamicdep; + u32 cm_l4cfg_l4_cfg_clkctrl; + u32 cm_l4cfg_hw_sem_clkctrl; + u32 cm_l4cfg_mailbox_clkctrl; + u32 cm_l4cfg_sar_rom_clkctrl; + u32 cm_l3instr_clkstctrl; + u32 cm_l3instr_l3_3_clkctrl; + u32 cm_l3instr_l3_instr_clkctrl; + u32 cm_l3instr_intrconn_wp1_clkctrl; + + /* cm2.ivahd */ + u32 cm_ivahd_clkstctrl; + u32 cm_ivahd_ivahd_clkctrl; + u32 cm_ivahd_sl2_clkctrl; + + /* cm2.cam */ + u32 cm_cam_clkstctrl; + u32 cm_cam_iss_clkctrl; + u32 cm_cam_fdif_clkctrl; + u32 cm_cam_vip1_clkctrl; + u32 cm_cam_vip2_clkctrl; + u32 cm_cam_vip3_clkctrl; + u32 cm_cam_lvdsrx_clkctrl; + u32 cm_cam_csi1_clkctrl; + u32 cm_cam_csi2_clkctrl; + + /* cm2.dss */ + u32 cm_dss_clkstctrl; + u32 cm_dss_dss_clkctrl; + + /* cm2.sgx */ + u32 cm_sgx_clkstctrl; + u32 cm_sgx_sgx_clkctrl; + + /* cm2.l3init */ + u32 cm_l3init_clkstctrl; + + /* cm2.l3init */ + u32 cm_l3init_hsmmc1_clkctrl; + u32 cm_l3init_hsmmc2_clkctrl; + u32 cm_l3init_hsi_clkctrl; + u32 cm_l3init_hsusbhost_clkctrl; + u32 cm_l3init_hsusbotg_clkctrl; + u32 cm_l3init_hsusbtll_clkctrl; + u32 cm_l3init_p1500_clkctrl; + u32 cm_l3init_fsusb_clkctrl; + u32 cm_l3init_ocp2scp1_clkctrl; + + /* cm2.l4per */ + u32 cm_l4per_clkstctrl; + u32 cm_l4per_dynamicdep; + u32 cm_l4per_adc_clkctrl; + u32 cm_l4per_gptimer10_clkctrl; + u32 cm_l4per_gptimer11_clkctrl; + u32 cm_l4per_gptimer2_clkctrl; + u32 cm_l4per_gptimer3_clkctrl; + u32 cm_l4per_gptimer4_clkctrl; + u32 cm_l4per_gptimer9_clkctrl; + u32 cm_l4per_elm_clkctrl; + u32 cm_l4per_gpio2_clkctrl; + u32 cm_l4per_gpio3_clkctrl; + u32 cm_l4per_gpio4_clkctrl; + u32 cm_l4per_gpio5_clkctrl; + u32 cm_l4per_gpio6_clkctrl; + u32 cm_l4per_hdq1w_clkctrl; + u32 cm_l4per_hecc1_clkctrl; + u32 cm_l4per_hecc2_clkctrl; + u32 cm_l4per_i2c1_clkctrl; + u32 cm_l4per_i2c2_clkctrl; + u32 cm_l4per_i2c3_clkctrl; + u32 cm_l4per_i2c4_clkctrl; + u32 cm_l4per_l4per_clkctrl; + u32 cm_l4per_mcasp2_clkctrl; + u32 cm_l4per_mcasp3_clkctrl; + u32 cm_l4per_mgate_clkctrl; + u32 cm_l4per_mcspi1_clkctrl; + u32 cm_l4per_mcspi2_clkctrl; + u32 cm_l4per_mcspi3_clkctrl; + u32 cm_l4per_mcspi4_clkctrl; + u32 cm_l4per_gpio7_clkctrl; + u32 cm_l4per_gpio8_clkctrl; + u32 cm_l4per_mmcsd3_clkctrl; + u32 cm_l4per_mmcsd4_clkctrl; + u32 cm_l4per_msprohg_clkctrl; + u32 cm_l4per_slimbus2_clkctrl; + u32 cm_l4per_uart1_clkctrl; + u32 cm_l4per_uart2_clkctrl; + u32 cm_l4per_uart3_clkctrl; + u32 cm_l4per_uart4_clkctrl; + u32 cm_l4per_mmcsd5_clkctrl; + u32 cm_l4per_i2c5_clkctrl; + u32 cm_l4per_uart5_clkctrl; + u32 cm_l4per_uart6_clkctrl; + u32 cm_l4sec_clkstctrl; + u32 cm_l4sec_staticdep; + u32 cm_l4sec_dynamicdep; + u32 cm_l4sec_aes1_clkctrl; + u32 cm_l4sec_aes2_clkctrl; + u32 cm_l4sec_des3des_clkctrl; + u32 cm_l4sec_pkaeip29_clkctrl; + u32 cm_l4sec_rng_clkctrl; + u32 cm_l4sec_sha2md51_clkctrl; + u32 cm_l4sec_cryptodma_clkctrl; + + /* l4 wkup regs */ + u32 cm_abe_pll_ref_clksel; + u32 cm_sys_clksel; + u32 cm_wkup_clkstctrl; + u32 cm_wkup_l4wkup_clkctrl; + u32 cm_wkup_wdtimer1_clkctrl; + u32 cm_wkup_wdtimer2_clkctrl; + u32 cm_wkup_gpio1_clkctrl; + u32 cm_wkup_gptimer1_clkctrl; + u32 cm_wkup_gptimer12_clkctrl; + u32 cm_wkup_synctimer_clkctrl; + u32 cm_wkup_usim_clkctrl; + u32 cm_wkup_sarram_clkctrl; + u32 cm_wkup_keyboard_clkctrl; + u32 cm_wkup_rtc_clkctrl; + u32 cm_wkup_bandgap_clkctrl; + u32 cm_wkupaon_scrm_clkctrl; + u32 cm_wkupaon_io_srcomp_clkctrl; + u32 prm_rstctrl; + u32 prm_rstst; + u32 prm_vc_val_bypass; + u32 prm_vc_cfg_i2c_mode; + u32 prm_vc_cfg_i2c_clk; + u32 prm_sldo_core_setup; + u32 prm_sldo_core_ctrl; + u32 prm_sldo_mpu_setup; + u32 prm_sldo_mpu_ctrl; + u32 prm_sldo_mm_setup; + u32 prm_sldo_mm_ctrl; + + u32 cm_div_m4_dpll_core; + u32 cm_div_m5_dpll_core; + u32 cm_div_m6_dpll_core; + u32 cm_div_m7_dpll_core; + u32 cm_div_m4_dpll_iva; + u32 cm_div_m5_dpll_iva; + u32 cm_div_m4_dpll_ddrphy; + u32 cm_div_m5_dpll_ddrphy; + u32 cm_div_m6_dpll_ddrphy; + u32 cm_div_m4_dpll_per; + u32 cm_div_m5_dpll_per; + u32 cm_div_m6_dpll_per; + u32 cm_div_m7_dpll_per; + u32 cm_l3instr_intrconn_wp1_clkct; + u32 cm_l3init_usbphy_clkctrl; + u32 cm_l4per_mcbsp4_clkctrl; + u32 prm_vc_cfg_channel; +}; + +struct omap_sys_ctrl_regs { + u32 control_status; + u32 control_core_mmr_lock1; + u32 control_core_mmr_lock2; + u32 control_core_mmr_lock3; + u32 control_core_mmr_lock4; + u32 control_core_mmr_lock5; + u32 control_core_control_io1; + u32 control_core_control_io2; + u32 control_id_code; + u32 control_std_fuse_opp_bgap; + u32 control_ldosram_iva_voltage_ctrl; + u32 control_ldosram_mpu_voltage_ctrl; + u32 control_ldosram_core_voltage_ctrl; + u32 control_padconf_core_base; + u32 control_paconf_global; + u32 control_paconf_mode; + u32 control_smart1io_padconf_0; + u32 control_smart1io_padconf_1; + u32 control_smart1io_padconf_2; + u32 control_smart2io_padconf_0; + u32 control_smart2io_padconf_1; + u32 control_smart2io_padconf_2; + u32 control_smart3io_padconf_0; + u32 control_smart3io_padconf_1; + u32 control_pbias; + u32 control_i2c_0; + u32 control_camera_rx; + u32 control_hdmi_tx_phy; + u32 control_uniportm; + u32 control_dsiphy; + u32 control_mcbsplp; + u32 control_usb2phycore; + u32 control_hdmi_1; + u32 control_hsi; + u32 control_ddr3ch1_0; + u32 control_ddr3ch2_0; + u32 control_ddrch1_0; + u32 control_ddrch1_1; + u32 control_ddrch2_0; + u32 control_ddrch2_1; + u32 control_lpddr2ch1_0; + u32 control_lpddr2ch1_1; + u32 control_ddrio_0; + u32 control_ddrio_1; + u32 control_ddrio_2; + u32 control_lpddr2io1_0; + u32 control_lpddr2io1_1; + u32 control_lpddr2io1_2; + u32 control_lpddr2io1_3; + u32 control_lpddr2io2_0; + u32 control_lpddr2io2_1; + u32 control_lpddr2io2_2; + u32 control_lpddr2io2_3; + u32 control_hyst_1; + u32 control_usbb_hsic_control; + u32 control_c2c; + u32 control_core_control_spare_rw; + u32 control_core_control_spare_r; + u32 control_core_control_spare_r_c0; + u32 control_srcomp_north_side; + u32 control_srcomp_south_side; + u32 control_srcomp_east_side; + u32 control_srcomp_west_side; + u32 control_srcomp_code_latch; + u32 control_pbiaslite; + u32 control_port_emif1_sdram_config; + u32 control_port_emif1_lpddr2_nvm_config; + u32 control_port_emif2_sdram_config; + u32 control_emif1_sdram_config_ext; + u32 control_emif2_sdram_config_ext; + u32 control_smart1nopmio_padconf_0; + u32 control_smart1nopmio_padconf_1; + u32 control_padconf_mode; + u32 control_xtal_oscillator; + u32 control_i2c_2; + u32 control_ckobuffer; + u32 control_wkup_control_spare_rw; + u32 control_wkup_control_spare_r; + u32 control_wkup_control_spare_r_c0; + u32 control_srcomp_east_side_wkup; + u32 control_efuse_1; + u32 control_efuse_2; + u32 control_efuse_3; + u32 control_efuse_4; + u32 control_efuse_5; + u32 control_efuse_6; + u32 control_efuse_7; + u32 control_efuse_8; + u32 control_efuse_9; + u32 control_efuse_10; + u32 control_efuse_11; + u32 control_efuse_12; + u32 control_efuse_13; + u32 control_padconf_wkup_base; +}; + +struct dpll_params { + u32 m; + u32 n; + s8 m2; + s8 m3; + s8 m4_h11; + s8 m5_h12; + s8 m6_h13; + s8 m7_h14; + s8 h21; + s8 h22; + s8 h23; + s8 h24; +}; + +struct dpll_regs { + u32 cm_clkmode_dpll; + u32 cm_idlest_dpll; + u32 cm_autoidle_dpll; + u32 cm_clksel_dpll; + u32 cm_div_m2_dpll; + u32 cm_div_m3_dpll; + u32 cm_div_m4_h11_dpll; + u32 cm_div_m5_h12_dpll; + u32 cm_div_m6_h13_dpll; + u32 cm_div_m7_h14_dpll; + u32 reserved[2]; + u32 cm_div_h21_dpll; + u32 cm_div_h22_dpll; + u32 cm_div_h23_dpll; + u32 cm_div_h24_dpll; +}; + +struct dplls { + const struct dpll_params *mpu; + const struct dpll_params *core; + const struct dpll_params *per; + const struct dpll_params *abe; + const struct dpll_params *iva; + const struct dpll_params *usb; + const struct dpll_params *ddr; +}; + +struct pmic_data { + u32 base_offset; + u32 step; + u32 start_code; + unsigned gpio; + int gpio_en; +}; + +struct volts { + u32 value; + u32 addr; + struct pmic_data *pmic; +}; + +struct vcores_data { + struct volts mpu; + struct volts core; + struct volts mm; +}; + +extern struct prcm_regs const **prcm; +extern struct prcm_regs const omap5_es1_prcm; +extern struct prcm_regs const omap5_es2_prcm; +extern struct prcm_regs const omap4_prcm; +extern struct prcm_regs const dra7xx_prcm; +extern struct dplls const **dplls_data; +extern struct vcores_data const **omap_vcores; +extern const u32 sys_clk_array[8]; +extern struct omap_sys_ctrl_regs const **ctrl; +extern struct omap_sys_ctrl_regs const omap4_ctrl; +extern struct omap_sys_ctrl_regs const omap5_ctrl; +extern struct omap_sys_ctrl_regs const dra7xx_ctrl; + +void hw_data_init(void); + +const struct dpll_params *get_mpu_dpll_params(struct dplls const *); +const struct dpll_params *get_core_dpll_params(struct dplls const *); +const struct dpll_params *get_per_dpll_params(struct dplls const *); +const struct dpll_params *get_iva_dpll_params(struct dplls const *); +const struct dpll_params *get_usb_dpll_params(struct dplls const *); +const struct dpll_params *get_abe_dpll_params(struct dplls const *); + +void do_enable_clocks(u32 const *clk_domains, + u32 const *clk_modules_hw_auto, + u32 const *clk_modules_explicit_en, + u8 wait_for_enable); + +void setup_post_dividers(u32 const base, + const struct dpll_params *params); +u32 omap_ddr_clk(void); +u32 get_sys_clk_index(void); +void enable_basic_clocks(void); +void enable_basic_uboot_clocks(void); +void enable_non_essential_clocks(void); +void scale_vcores(struct vcores_data const *); +u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic); +void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic); + /* Max value for DPLL multiplier M */ #define OMAP_DPLL_MAX_N 127 @@ -60,4 +578,9 @@ static inline u32 omap_revision(void) #define OMAP5430_SILICON_ID_INVALID 0 #define OMAP5430_ES1_0 0x54300100 #define OMAP5432_ES1_0 0x54320100 +#define OMAP5430_ES2_0 0x54300200 +#define OMAP5432_ES2_0 0x54320200 + +/* DRA7XX */ +#define DRA752_ES1_0 0x07520100 #endif /* _OMAP_COMMON_H_ */ diff --git a/arch/arm/include/asm/omap_mmc.h b/arch/arm/include/asm/omap_mmc.h new file mode 100644 index 0000000000..617e22fa52 --- /dev/null +++ b/arch/arm/include/asm/omap_mmc.h @@ -0,0 +1,168 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation's version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef OMAP_MMC_H_ +#define OMAP_MMC_H_ + +struct hsmmc { + unsigned char res1[0x10]; + unsigned int sysconfig; /* 0x10 */ + unsigned int sysstatus; /* 0x14 */ + unsigned char res2[0x14]; + unsigned int con; /* 0x2C */ + unsigned char res3[0xD4]; + unsigned int blk; /* 0x104 */ + unsigned int arg; /* 0x108 */ + unsigned int cmd; /* 0x10C */ + unsigned int rsp10; /* 0x110 */ + unsigned int rsp32; /* 0x114 */ + unsigned int rsp54; /* 0x118 */ + unsigned int rsp76; /* 0x11C */ + unsigned int data; /* 0x120 */ + unsigned int pstate; /* 0x124 */ + unsigned int hctl; /* 0x128 */ + unsigned int sysctl; /* 0x12C */ + unsigned int stat; /* 0x130 */ + unsigned int ie; /* 0x134 */ + unsigned char res4[0x8]; + unsigned int capa; /* 0x140 */ +}; + +/* + * OMAP HS MMC Bit definitions + */ +#define MMC_SOFTRESET (0x1 << 1) +#define RESETDONE (0x1 << 0) +#define NOOPENDRAIN (0x0 << 0) +#define OPENDRAIN (0x1 << 0) +#define OD (0x1 << 0) +#define INIT_NOINIT (0x0 << 1) +#define INIT_INITSTREAM (0x1 << 1) +#define HR_NOHOSTRESP (0x0 << 2) +#define STR_BLOCK (0x0 << 3) +#define MODE_FUNC (0x0 << 4) +#define DW8_1_4BITMODE (0x0 << 5) +#define MIT_CTO (0x0 << 6) +#define CDP_ACTIVEHIGH (0x0 << 7) +#define WPP_ACTIVEHIGH (0x0 << 8) +#define RESERVED_MASK (0x3 << 9) +#define CTPL_MMC_SD (0x0 << 11) +#define BLEN_512BYTESLEN (0x200 << 0) +#define NBLK_STPCNT (0x0 << 16) +#define DE_DISABLE (0x0 << 0) +#define BCE_DISABLE (0x0 << 1) +#define BCE_ENABLE (0x1 << 1) +#define ACEN_DISABLE (0x0 << 2) +#define DDIR_OFFSET (4) +#define DDIR_MASK (0x1 << 4) +#define DDIR_WRITE (0x0 << 4) +#define DDIR_READ (0x1 << 4) +#define MSBS_SGLEBLK (0x0 << 5) +#define MSBS_MULTIBLK (0x1 << 5) +#define RSP_TYPE_OFFSET (16) +#define RSP_TYPE_MASK (0x3 << 16) +#define RSP_TYPE_NORSP (0x0 << 16) +#define RSP_TYPE_LGHT136 (0x1 << 16) +#define RSP_TYPE_LGHT48 (0x2 << 16) +#define RSP_TYPE_LGHT48B (0x3 << 16) +#define CCCE_NOCHECK (0x0 << 19) +#define CCCE_CHECK (0x1 << 19) +#define CICE_NOCHECK (0x0 << 20) +#define CICE_CHECK (0x1 << 20) +#define DP_OFFSET (21) +#define DP_MASK (0x1 << 21) +#define DP_NO_DATA (0x0 << 21) +#define DP_DATA (0x1 << 21) +#define CMD_TYPE_NORMAL (0x0 << 22) +#define INDEX_OFFSET (24) +#define INDEX_MASK (0x3f << 24) +#define INDEX(i) (i << 24) +#define DATI_MASK (0x1 << 1) +#define CMDI_MASK (0x1 << 0) +#define DTW_1_BITMODE (0x0 << 1) +#define DTW_4_BITMODE (0x1 << 1) +#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/ +#define SDBP_PWROFF (0x0 << 8) +#define SDBP_PWRON (0x1 << 8) +#define SDVS_1V8 (0x5 << 9) +#define SDVS_3V0 (0x6 << 9) +#define ICE_MASK (0x1 << 0) +#define ICE_STOP (0x0 << 0) +#define ICS_MASK (0x1 << 1) +#define ICS_NOTREADY (0x0 << 1) +#define ICE_OSCILLATE (0x1 << 0) +#define CEN_MASK (0x1 << 2) +#define CEN_DISABLE (0x0 << 2) +#define CEN_ENABLE (0x1 << 2) +#define CLKD_OFFSET (6) +#define CLKD_MASK (0x3FF << 6) +#define DTO_MASK (0xF << 16) +#define DTO_15THDTO (0xE << 16) +#define SOFTRESETALL (0x1 << 24) +#define CC_MASK (0x1 << 0) +#define TC_MASK (0x1 << 1) +#define BWR_MASK (0x1 << 4) +#define BRR_MASK (0x1 << 5) +#define ERRI_MASK (0x1 << 15) +#define IE_CC (0x01 << 0) +#define IE_TC (0x01 << 1) +#define IE_BWR (0x01 << 4) +#define IE_BRR (0x01 << 5) +#define IE_CTO (0x01 << 16) +#define IE_CCRC (0x01 << 17) +#define IE_CEB (0x01 << 18) +#define IE_CIE (0x01 << 19) +#define IE_DTO (0x01 << 20) +#define IE_DCRC (0x01 << 21) +#define IE_DEB (0x01 << 22) +#define IE_CERR (0x01 << 28) +#define IE_BADA (0x01 << 29) + +#define VS30_3V0SUP (1 << 25) +#define VS18_1V8SUP (1 << 26) + +/* Driver definitions */ +#define MMCSD_SECTOR_SIZE 512 +#define MMC_CARD 0 +#define SD_CARD 1 +#define BYTE_MODE 0 +#define SECTOR_MODE 1 +#define CLK_INITSEQ 0 +#define CLK_400KHZ 1 +#define CLK_MISC 2 + +#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK) +#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE) + +/* Clock Configurations and Macros */ +#define MMC_CLOCK_REFERENCE 96 /* MHz */ + +#define mmc_reg_out(addr, mask, val)\ + writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr)) + +int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, + int wp_gpio); + + +#endif /* OMAP_MMC_H_ */ diff --git a/board/pcippc2/i2c.h b/arch/arm/include/asm/sections.h index 1224b42899..c042cb604b 100644 --- a/board/pcippc2/i2c.h +++ b/arch/arm/include/asm/sections.h @@ -1,7 +1,5 @@ /* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * + * Copyright (c) 2012 The Chromium OS Authors. * See file CREDITS for list of people who contributed to this * project. * @@ -12,7 +10,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -21,16 +19,9 @@ * MA 02111-1307 USA */ -#ifndef _I2C_H_ -#define _I2C_H_ - -#include <common.h> - -extern int i2c_read_byte (u8 * data, - u8 dev, - u8 offset); - -extern unsigned int i2c_reset (void); +#ifndef __ASM_ARM_SECTIONS_H +#define __ASM_ARM_SECTIONS_H +#include <asm-generic/sections.h> #endif diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h index 62011aaada..2b7218edad 100644 --- a/arch/arm/include/asm/spl.h +++ b/arch/arm/include/asm/spl.h @@ -27,7 +27,7 @@ #include <asm/arch/spl.h> /* Linker symbols. */ -extern char __bss_start[], __bss_end__[]; +extern char __bss_start[], __bss_end[]; extern gd_t gdata; diff --git a/arch/arm/include/asm/u-boot-arm.h b/arch/arm/include/asm/u-boot-arm.h index 9f3cae5ece..f16861ad2f 100644 --- a/arch/arm/include/asm/u-boot-arm.h +++ b/arch/arm/include/asm/u-boot-arm.h @@ -30,12 +30,8 @@ #define _U_BOOT_ARM_H_ 1 /* for the following variables, see start.S */ -extern ulong _bss_start_ofs; /* BSS start relative to _start */ -extern ulong _bss_end_ofs; /* BSS end relative to _start */ -extern ulong _end_ofs; /* end of image relative to _start */ extern ulong IRQ_STACK_START; /* top of IRQ stack */ extern ulong FIQ_STACK_START; /* top of FIQ stack */ -extern ulong _TEXT_BASE; /* code start */ extern ulong _datarel_start_ofs; extern ulong _datarelrolocal_start_ofs; extern ulong _datarellocal_start_ofs; diff --git a/arch/arm/include/asm/u-boot.h b/arch/arm/include/asm/u-boot.h index 2ba98bca7d..a33fefa6d4 100644 --- a/arch/arm/include/asm/u-boot.h +++ b/arch/arm/include/asm/u-boot.h @@ -36,6 +36,12 @@ #ifndef _U_BOOT_H_ #define _U_BOOT_H_ 1 +#ifdef CONFIG_SYS_GENERIC_BOARD +/* Use the generic board which requires a unified bd_info */ +#include <asm-generic/u-boot.h> +#else + +#ifndef __ASSEMBLY__ typedef struct bd_info { unsigned int bi_baudrate; /* serial console baudrate */ ulong bi_arch_number; /* unique id for this board */ @@ -49,6 +55,9 @@ typedef struct bd_info { ulong size; } bi_dram[CONFIG_NR_DRAM_BANKS]; } bd_t; +#endif + +#endif /* !CONFIG_SYS_GENERIC_BOARD */ /* For image.h:image_check_target_arch() */ #define IH_ARCH_DEFAULT IH_ARCH_ARM diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 57111afd90..6ae161a51d 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -39,7 +39,11 @@ GLCOBJS += div0.o SOBJS-y += crt0.o ifndef CONFIG_SPL_BUILD +ifndef CONFIG_SYS_GENERIC_BOARD COBJS-y += board.o +endif +COBJS-y += bss.o + COBJS-y += bootm.o COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 162e2cc863..0521178ac3 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -53,6 +53,7 @@ #include <fdtdec.h> #include <post.h> #include <logbuff.h> +#include <asm/sections.h> #ifdef CONFIG_BITBANGMII #include <miiphy.h> diff --git a/arch/arm/lib/bss.c b/arch/arm/lib/bss.c new file mode 100644 index 0000000000..99eda59137 --- /dev/null +++ b/arch/arm/lib/bss.c @@ -0,0 +1,39 @@ +/* + * Copyright 2013 Albert ARIBAUD <albert.u.boot@aribaud.net> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/** + * These two symbols are declared in a C file so that the linker + * uses R_ARM_RELATIVE relocation, rather than the R_ARM_ABS32 one + * it would use if the symbols were defined in the linker file. + * Using only R_ARM_RELATIVE relocation ensures that references to + * the symbols are correct after as well as before relocation. + * + * We need a 0-byte-size type for these symbols, and the compiler + * does not allow defining objects of C type 'void'. Using an empty + * struct is allowed by the compiler, but causes gcc versions 4.4 and + * below to complain about aliasing. Therefore we use the next best + * thing: zero-sized arrays, which are both 0-byte-size and exempt from + * aliasing warnings. + */ + +char __bss_start[0] __attribute__((used, section(".__bss_start"))); +char __bss_end[0] __attribute__((used, section(".__bss_end"))); diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S index 4f60958b1d..37d9927d2c 100644 --- a/arch/arm/lib/crt0.S +++ b/arch/arm/lib/crt0.S @@ -85,7 +85,7 @@ */ .globl __bss_start -.globl __bss_end__ +.globl __bss_end /* * entry point of crt0 sequence @@ -141,7 +141,7 @@ here: bl c_runtime_cpu_setup /* we still call old routine here */ ldr r0, =__bss_start /* this is auto-relocated! */ - ldr r1, =__bss_end__ /* this is auto-relocated! */ + ldr r1, =__bss_end /* this is auto-relocated! */ mov r2, #0x00000000 /* prepare zero to clear BSS */ diff --git a/arch/arm/lib/spl.c b/arch/arm/lib/spl.c index f568f619cb..301f082ea3 100644 --- a/arch/arm/lib/spl.c +++ b/arch/arm/lib/spl.c @@ -45,7 +45,7 @@ void __weak board_init_f(ulong dummy) asm volatile("mov sp, %0\n" : : "r"(CONFIG_SPL_STACK)); /* Clear the BSS. */ - memset(__bss_start, 0, __bss_end__ - __bss_start); + memset(__bss_start, 0, __bss_end - __bss_start); /* Set global data pointer. */ gd = &gdata; diff --git a/arch/avr32/cpu/start.S b/arch/avr32/cpu/start.S index 71cbc524c9..c8decea127 100644 --- a/arch/avr32/cpu/start.S +++ b/arch/avr32/cpu/start.S @@ -244,7 +244,7 @@ relocate_code: /* zero out .bss */ mov r0, 0 mov r1, 0 - lda.w r9, __bss_end__ + lda.w r9, __bss_end sub r9, r8 1: st.d r10++, r0 sub r9, 8 diff --git a/arch/avr32/cpu/u-boot.lds b/arch/avr32/cpu/u-boot.lds index 0b16d2a883..4e4a436dc9 100644 --- a/arch/avr32/cpu/u-boot.lds +++ b/arch/avr32/cpu/u-boot.lds @@ -50,7 +50,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); @@ -68,5 +68,5 @@ SECTIONS *(.bss.*) } . = ALIGN(8); - __bss_end__ = .; + __bss_end = .; } diff --git a/arch/avr32/include/asm/sections.h b/arch/avr32/include/asm/sections.h index 3f157888ee..056d7a05d5 100644 --- a/arch/avr32/include/asm/sections.h +++ b/arch/avr32/include/asm/sections.h @@ -22,11 +22,11 @@ #ifndef __ASM_AVR32_SECTIONS_H #define __ASM_AVR32_SECTIONS_H +#include <asm-generic/sections.h> + /* References to section boundaries */ -extern char _text[], _etext[]; -extern char _data[], __data_lma[], _edata[], __edata_lma[]; +extern char __data_lma[], __edata_lma[]; extern char __got_start[], __got_lma[], __got_end[]; -extern char __bss_end__[]; #endif /* __ASM_AVR32_SECTIONS_H */ diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c index d3c8cb76dd..57e07dfb89 100644 --- a/arch/avr32/lib/board.c +++ b/arch/avr32/lib/board.c @@ -116,7 +116,7 @@ static int display_banner (void) printf ("\n\n%s\n\n", version_string); printf ("U-Boot code: %08lx -> %08lx data: %08lx -> %08lx\n", (unsigned long)_text, (unsigned long)_etext, - (unsigned long)_data, (unsigned long)__bss_end__); + (unsigned long)_data, (unsigned long)__bss_end); return 0; } @@ -188,7 +188,7 @@ void board_init_f(ulong board_type) * - stack */ addr = CONFIG_SYS_SDRAM_BASE + sdram_size; - monitor_len = __bss_end__ - _text; + monitor_len = (char *)__bss_end - _text; /* * Reserve memory for u-boot code, data and bss. @@ -211,11 +211,11 @@ void board_init_f(ulong board_type) #ifdef CONFIG_FB_ADDR printf("LCD: Frame buffer allocated at preset 0x%08x\n", CONFIG_FB_ADDR); - gd->fb_base = (void *)CONFIG_FB_ADDR; + gd->fb_base = CONFIG_FB_ADDR; #else addr = lcd_setmem(addr); printf("LCD: Frame buffer allocated at 0x%08lx\n", addr); - gd->fb_base = (void *)addr; + gd->fb_base = addr; #endif /* CONFIG_FB_ADDR */ #endif /* CONFIG_LCD */ @@ -286,7 +286,6 @@ void board_init_r(gd_t *new_gd, ulong dest_addr) /* The malloc area is right below the monitor image in RAM */ mem_malloc_init(CONFIG_SYS_MONITOR_BASE + gd->reloc_off - CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN); - malloc_bin_reloc(); dma_alloc_init(); enable_interrupts(); diff --git a/arch/blackfin/cpu/cpu.c b/arch/blackfin/cpu/cpu.c index 6a0bcca9f9..0be2e2b835 100644 --- a/arch/blackfin/cpu/cpu.c +++ b/arch/blackfin/cpu/cpu.c @@ -23,7 +23,6 @@ ulong bfin_poweron_retx; -__attribute__ ((__noreturn__)) void cpu_init_f(ulong bootflag, ulong loaded_from_ldr) { #ifndef CONFIG_BFIN_BOOTROM_USES_EVT1 @@ -68,7 +67,9 @@ void cpu_init_f(ulong bootflag, ulong loaded_from_ldr) /* Reset upon a double exception rather than just hanging. * Do not do bfin_read on SWRST as that will reset status bits. */ +# ifdef SWRST bfin_write_SWRST(DOUBLE_FAULT); +# endif #endif serial_early_puts("Board init flash\n"); @@ -92,7 +93,7 @@ int irq_init(void) #elif defined(SICA_IMASK0) bfin_write_SICA_IMASK0(0); bfin_write_SICA_IMASK1(0); -#else +#elif defined(SIC_IMASK) bfin_write_SIC_IMASK(0); #endif /* Set up a dummy NMI handler if needed. */ diff --git a/arch/blackfin/cpu/gpio.c b/arch/blackfin/cpu/gpio.c index 5674d42b6d..f684be531c 100644 --- a/arch/blackfin/cpu/gpio.c +++ b/arch/blackfin/cpu/gpio.c @@ -66,6 +66,14 @@ static struct gpio_port_t * const gpio_array[] = { (struct gpio_port_t *)PORTH_FER, (struct gpio_port_t *)PORTI_FER, (struct gpio_port_t *)PORTJ_FER, +#elif defined(CONFIG_BF60x) + (struct gpio_port_t *)PORTA_FER, + (struct gpio_port_t *)PORTB_FER, + (struct gpio_port_t *)PORTC_FER, + (struct gpio_port_t *)PORTD_FER, + (struct gpio_port_t *)PORTE_FER, + (struct gpio_port_t *)PORTF_FER, + (struct gpio_port_t *)PORTG_FER, #else # error no gpio arrays defined #endif @@ -216,6 +224,12 @@ static void port_setup(unsigned gpio, unsigned short usage) else gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); SSYNC(); +#elif defined(CONFIG_BF60x) + if (usage == GPIO_USAGE) + gpio_array[gpio_bank(gpio)]->port_fer_clear = gpio_bit(gpio); + else + gpio_array[gpio_bank(gpio)]->port_fer_set = gpio_bit(gpio); + SSYNC(); #endif } @@ -290,7 +304,7 @@ static void portmux_setup(unsigned short per) } } } -#elif defined(CONFIG_BF54x) +#elif defined(CONFIG_BF54x) || defined(CONFIG_BF60x) inline void portmux_setup(unsigned short per) { u32 pmux; @@ -330,7 +344,7 @@ inline void portmux_setup(unsigned short per) # define portmux_setup(...) do { } while (0) #endif -#ifndef CONFIG_BF54x +#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x) /*********************************************************** * * FUNCTIONS: Blackfin General Purpose Ports Access Functions @@ -534,7 +548,7 @@ int peripheral_request(unsigned short per, const char *label) * be requested and used by several drivers */ -#ifdef CONFIG_BF54x +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) if (!((per & P_MAYSHARE) && get_portmux(per) == P_FUNCT2MUX(per))) { #else if (!(per & P_MAYSHARE)) { @@ -651,7 +665,7 @@ int bfin_gpio_request(unsigned gpio, const char *label) gpio, get_label(gpio)); return -EBUSY; } -#ifndef CONFIG_BF54x +#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x) else { /* Reset POLAR setting when acquiring a gpio for the first time */ set_gpio_polar(gpio, 0); } @@ -732,12 +746,16 @@ void bfin_special_gpio_free(unsigned gpio) static inline void __bfin_gpio_direction_input(unsigned gpio) { -#ifdef CONFIG_BF54x +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) gpio_array[gpio_bank(gpio)]->dir_clear = gpio_bit(gpio); #else gpio_array[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); #endif +#if defined(CONFIG_BF60x) + gpio_array[gpio_bank(gpio)]->inen_set = gpio_bit(gpio); +#else gpio_array[gpio_bank(gpio)]->inen |= gpio_bit(gpio); +#endif } int bfin_gpio_direction_input(unsigned gpio) @@ -785,9 +803,13 @@ int bfin_gpio_direction_output(unsigned gpio, int value) local_irq_save(flags); +#if defined(CONFIG_BF60x) + gpio_array[gpio_bank(gpio)]->inen_clear = gpio_bit(gpio); +#else gpio_array[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); +#endif gpio_set_value(gpio, value); -#ifdef CONFIG_BF54x +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) gpio_array[gpio_bank(gpio)]->dir_set = gpio_bit(gpio); #else gpio_array[gpio_bank(gpio)]->dir |= gpio_bit(gpio); @@ -801,7 +823,7 @@ int bfin_gpio_direction_output(unsigned gpio, int value) int bfin_gpio_get_value(unsigned gpio) { -#ifdef CONFIG_BF54x +#if defined(CONFIG_BF54x) || defined(CONFIG_BF60x) return (1 & (gpio_array[gpio_bank(gpio)]->data >> gpio_sub_n(gpio))); #else unsigned long flags; diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c index fb3a101c79..1a066806d1 100644 --- a/arch/blackfin/cpu/initcode.c +++ b/arch/blackfin/cpu/initcode.c @@ -15,20 +15,141 @@ #include <asm/blackfin.h> #include <asm/mach-common/bits/bootrom.h> #include <asm/mach-common/bits/core.h> -#include <asm/mach-common/bits/ebiu.h> -#include <asm/mach-common/bits/pll.h> -#include <asm/mach-common/bits/uart.h> #define BUG() while (1) { asm volatile("emuexcpt;"); } #include "serial.h" +#ifndef __ADSPBF60x__ +#include <asm/mach-common/bits/ebiu.h> +#include <asm/mach-common/bits/pll.h> +#else /* __ADSPBF60x__ */ +#include <asm/mach-common/bits/cgu.h> + +#define CONFIG_BFIN_GET_DCLK_M \ + ((CONFIG_CLKIN_HZ*CONFIG_VCO_MULT)/(CONFIG_DCLK_DIV*1000000)) + +#ifndef CONFIG_DMC_DDRCFG +#if ((CONFIG_BFIN_GET_DCLK_M != 125) && \ + (CONFIG_BFIN_GET_DCLK_M != 133) && \ + (CONFIG_BFIN_GET_DCLK_M != 150) && \ + (CONFIG_BFIN_GET_DCLK_M != 166) && \ + (CONFIG_BFIN_GET_DCLK_M != 200) && \ + (CONFIG_BFIN_GET_DCLK_M != 225) && \ + (CONFIG_BFIN_GET_DCLK_M != 250)) +#error "DDR2 CLK must be in (125, 133, 150, 166, 200, 225, 250)MHz" +#endif +#endif + +/* DMC control bits */ +#define SRREQ 0x8 + +/* DMC status bits */ +#define IDLE 0x1 +#define MEMINITDONE 0x4 +#define SRACK 0x8 +#define PDACK 0x10 +#define DPDACK 0x20 +#define DLLCALDONE 0x2000 +#define PENDREF 0xF0000 +#define PHYRDPHASE 0xF00000 +#define PHYRDPHASE_OFFSET 20 + +/* DMC DLL control bits */ +#define DLLCALRDCNT 0xFF +#define DATACYC_OFFSET 8 + +struct ddr_config { + u32 ddr_clk; + u32 dmc_ddrctl; + u32 dmc_ddrcfg; + u32 dmc_ddrtr0; + u32 dmc_ddrtr1; + u32 dmc_ddrtr2; + u32 dmc_ddrmr; + u32 dmc_ddrmr1; +}; + +static struct ddr_config ddr_config_table[] = { + [0] = { + .ddr_clk = 125, /* 125MHz */ + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20705212, + .dmc_ddrtr1 = 0x201003CF, + .dmc_ddrtr2 = 0x00320107, + .dmc_ddrmr = 0x00000422, + .dmc_ddrmr1 = 0x4, + }, + [1] = { + .ddr_clk = 133, /* 133MHz */ + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20806313, + .dmc_ddrtr1 = 0x2013040D, + .dmc_ddrtr2 = 0x00320108, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [2] = { + .ddr_clk = 150, /* 150MHz */ + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20A07323, + .dmc_ddrtr1 = 0x20160492, + .dmc_ddrtr2 = 0x00320209, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [3] = { + .ddr_clk = 166, /* 166MHz */ + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20A07323, + .dmc_ddrtr1 = 0x2016050E, + .dmc_ddrtr2 = 0x00320209, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [4] = { + .ddr_clk = 200, /* 200MHz */ + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20a07323, + .dmc_ddrtr1 = 0x2016050f, + .dmc_ddrtr2 = 0x00320509, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [5] = { + .ddr_clk = 225, /* 225MHz */ + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20E0A424, + .dmc_ddrtr1 = 0x302006DB, + .dmc_ddrtr2 = 0x0032020D, + .dmc_ddrmr = 0x00000842, + .dmc_ddrmr1 = 0x4, + }, + [6] = { + .ddr_clk = 250, /* 250MHz */ + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20E0A424, + .dmc_ddrtr1 = 0x3020079E, + .dmc_ddrtr2 = 0x0032050D, + .dmc_ddrmr = 0x00000842, + .dmc_ddrmr1 = 0x4, + }, +}; +#endif /* __ADSPBF60x__ */ + __attribute__((always_inline)) static inline void serial_init(void) { - uint32_t uart_base = UART_DLL; + uint32_t uart_base = UART_BASE; -#ifdef __ADSPBF54x__ +#if defined(__ADSPBF54x__) || defined(__ADSPBF60x__) # ifdef BFIN_BOOT_UART_USE_RTS # define BFIN_UART_USE_RTS 1 # else @@ -38,7 +159,12 @@ static inline void serial_init(void) size_t i; /* force RTS rather than relying on auto RTS */ +#if BFIN_UART_HW_VER < 4 bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) | FCPOL); +#else + bfin_write32(&pUART->control, bfin_read32(&pUART->control) | + FCPOL); +#endif /* Wait for the line to clear up. We cannot rely on UART * registers as none of them reflect the status of the RSR. @@ -68,13 +194,14 @@ static inline void serial_init(void) #endif if (BFIN_DEBUG_EARLY_SERIAL) { - int ucen = bfin_read16(&pUART->gctl) & UCEN; + int enabled = serial_early_enabled(uart_base); + serial_early_init(uart_base); /* If the UART is off, that means we need to program * the baud rate ourselves initially. */ - if (ucen != UCEN) + if (!enabled) serial_early_set_baud(uart_base, CONFIG_BAUDRATE); } } @@ -82,12 +209,17 @@ static inline void serial_init(void) __attribute__((always_inline)) static inline void serial_deinit(void) { -#ifdef __ADSPBF54x__ - uint32_t uart_base = UART_DLL; +#if defined(__ADSPBF54x__) || defined(__ADSPBF60x__) + uint32_t uart_base = UART_BASE; if (BFIN_UART_USE_RTS && CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { /* clear forced RTS rather than relying on auto RTS */ +#if BFIN_UART_HW_VER < 4 bfin_write16(&pUART->mcr, bfin_read16(&pUART->mcr) & ~FCPOL); +#else + bfin_write32(&pUART->control, bfin_read32(&pUART->control) & + ~FCPOL); +#endif } #endif } @@ -95,7 +227,7 @@ static inline void serial_deinit(void) __attribute__((always_inline)) static inline void serial_putc(char c) { - uint32_t uart_base = UART_DLL; + uint32_t uart_base = UART_BASE; if (!BFIN_DEBUG_EARLY_SERIAL) return; @@ -103,9 +235,9 @@ static inline void serial_putc(char c) if (c == '\n') serial_putc('\r'); - bfin_write16(&pUART->thr, c); + bfin_write(&pUART->thr, c); - while (!(bfin_read16(&pUART->lsr) & TEMT)) + while (!(_lsr_read(pUART) & TEMT)) continue; } @@ -152,6 +284,24 @@ program_nmi_handler(void) # define bfin_write_SPI_BAUD bfin_write_SPI0_BAUD #endif +#ifdef __ADSPBF60x__ + +#ifndef CONFIG_CGU_CTL_VAL +# define CONFIG_CGU_CTL_VAL ((CONFIG_VCO_MULT << 8) | CONFIG_CLKIN_HALF) +#endif + +#ifndef CONFIG_CGU_DIV_VAL +# define CONFIG_CGU_DIV_VAL \ + ((CONFIG_CCLK_DIV << CSEL_P) | \ + (CONFIG_SCLK0_DIV << S0SEL_P) | \ + (CONFIG_SCLK_DIV << SYSSEL_P) | \ + (CONFIG_SCLK1_DIV << S1SEL_P) | \ + (CONFIG_DCLK_DIV << DSEL_P) | \ + (CONFIG_OCLK_DIV << OSEL_P)) +#endif + +#else /* __ADSPBF60x__ */ + /* PLL_DIV defines */ #ifndef CONFIG_PLL_DIV_VAL # if (CONFIG_CCLK_DIV == 1) @@ -275,6 +425,8 @@ program_nmi_handler(void) # endif #endif +#endif /* __ADSPBF60x__ */ + __attribute__((always_inline)) static inline void program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) { @@ -283,8 +435,14 @@ program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) /* Save the clock pieces that are used in baud rate calculation */ if (BFIN_DEBUG_EARLY_SERIAL || CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { serial_putc('b'); +#ifdef __ADSPBF60x__ + *sdivB = bfin_read_CGU_DIV(); + *sdivB = ((*sdivB >> 8) & 0x1f) * ((*sdivB >> 5) & 0x7); + *vcoB = (bfin_read_CGU_CTL() >> 8) & 0x7f; +#else *sdivB = bfin_read_PLL_DIV() & 0xf; *vcoB = (bfin_read_PLL_CTL() >> 9) & 0x3f; +#endif *divB = serial_early_get_div(); serial_putc('c'); } @@ -303,8 +461,21 @@ program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) */ if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) { serial_putc('e'); +#ifdef __ADSPBF60x__ + bfin_write_SEC_GCTL(0x2); + SSYNC(); + bfin_write_SEC_FCTL(0xc1); + bfin_write_SEC_SCTL(2, bfin_read_SEC_SCTL(2) | 0x6); + + bfin_write_SEC_CCTL(0x2); + SSYNC(); + bfin_write_SEC_GCTL(0x1); + bfin_write_SEC_CCTL(0x1); +#endif bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE)); +#if CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART bfin_write_WDOG_CTL(0); +#endif serial_putc('f'); } #endif @@ -316,6 +487,7 @@ program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) * boot. Once we switch over to u-boot's SPI flash driver, we'll * increase the speed appropriately. */ +#ifdef SPI_BAUD if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) { serial_putc('h'); if (BOOTROM_SUPPORTS_SPI_FAST_READ && CONFIG_SPI_BAUD_INITBLOCK < 4) @@ -323,6 +495,7 @@ program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB) bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK); serial_putc('i'); } +#endif serial_putc('j'); } @@ -335,6 +508,15 @@ maybe_self_refresh(ADI_BOOT_DATA *bs) if (!CONFIG_MEM_SIZE) return false; +#ifdef __ADSPBF60x__ + /* resume from hibernate, return false let ddr initialize */ + if ((bfin_read32(DPM0_STAT) & 0xF0) == 0x50) { + serial_putc('b'); + return false; + } + +#else /* __ADSPBF60x__ */ + /* If external memory is enabled, put it into self refresh first. */ #if defined(EBIU_RSTCTL) if (bfin_read_EBIU_RSTCTL() & DDR_SRESET) { @@ -350,6 +532,7 @@ maybe_self_refresh(ADI_BOOT_DATA *bs) } #endif +#endif /* __ADSPBF60x__ */ serial_putc('c'); return false; @@ -362,6 +545,37 @@ program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs) serial_putc('a'); +#ifdef __ADSPBF60x__ + if (bfin_read_DMC0_STAT() & MEMINITDONE) { + bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() | SRREQ); + SSYNC(); + while (!(bfin_read_DMC0_STAT() & SRACK)) + continue; + } + + /* Don't set the same value of MSEL and DF to CGU_CTL */ + if ((bfin_read_CGU_CTL() & (MSEL_MASK | DF_MASK)) + != CONFIG_CGU_CTL_VAL) { + bfin_write_CGU_DIV(CONFIG_CGU_DIV_VAL); + bfin_write_CGU_CTL(CONFIG_CGU_CTL_VAL); + while ((bfin_read_CGU_STAT() & (CLKSALGN | PLLBP)) || + !(bfin_read_CGU_STAT() & PLLLK)) + continue; + } + + bfin_write_CGU_DIV(CONFIG_CGU_DIV_VAL | UPDT); + while (bfin_read_CGU_STAT() & CLKSALGN) + continue; + + if (bfin_read_DMC0_STAT() & MEMINITDONE) { + bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() & ~SRREQ); + SSYNC(); + while (bfin_read_DMC0_STAT() & SRACK) + continue; + } + +#else /* __ADSPBF60x__ */ + vr_ctl = bfin_read_VR_CTL(); serial_putc('b'); @@ -433,7 +647,7 @@ program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs) #elif defined(SICA_IWR0) bfin_write_SICA_IWR0(1); bfin_write_SICA_IWR1(0); -#else +#elif defined(SIC_IWR) bfin_write_SIC_IWR(1); #endif @@ -482,13 +696,15 @@ program_clocks(ADI_BOOT_DATA *bs, bool put_into_srfs) #elif defined(SICA_IWR0) bfin_write_SICA_IWR0(-1); bfin_write_SICA_IWR1(-1); -#else +#elif defined(SIC_IWR) bfin_write_SIC_IWR(-1); #endif serial_putc('n'); } +#endif /* __ADSPBF60x__ */ + serial_putc('o'); return vr_ctl; @@ -505,16 +721,25 @@ update_serial_clocks(ADI_BOOT_DATA *bs, uint sdivB, uint divB, uint vcoB) * for dividing which means we'd generate a libgcc reference. */ if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_UART) { - serial_putc('b'); unsigned int sdivR, vcoR; - sdivR = bfin_read_PLL_DIV() & 0xf; - vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f; int dividend = sdivB * divB * vcoR; int divisor = vcoB * sdivR; unsigned int quotient; + + serial_putc('b'); + +#ifdef __ADSPBF60x__ + sdivR = bfin_read_CGU_DIV(); + sdivR = ((sdivR >> 8) & 0x1f) * ((sdivR >> 5) & 0x7); + vcoR = (bfin_read_CGU_CTL() >> 8) & 0x7f; +#else + sdivR = bfin_read_PLL_DIV() & 0xf; + vcoR = (bfin_read_PLL_CTL() >> 9) & 0x3f; +#endif + for (quotient = 0; dividend > 0; ++quotient) dividend -= divisor; - serial_early_put_div(UART_DLL, quotient - ANOMALY_05000230); + serial_early_put_div(quotient - ANOMALY_05000230); serial_putc('c'); } @@ -531,6 +756,85 @@ program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs) serial_putc('b'); +#ifdef __ADSPBF60x__ + int dlldatacycle; + int dll_ctl; + int i = 0; + + if (CONFIG_BFIN_GET_DCLK_M == 125) + i = 0; + else if (CONFIG_BFIN_GET_DCLK_M == 133) + i = 1; + else if (CONFIG_BFIN_GET_DCLK_M == 150) + i = 2; + else if (CONFIG_BFIN_GET_DCLK_M == 166) + i = 3; + else if (CONFIG_BFIN_GET_DCLK_M == 200) + i = 4; + else if (CONFIG_BFIN_GET_DCLK_M == 225) + i = 5; + else if (CONFIG_BFIN_GET_DCLK_M == 250) + i = 6; + +#if 0 + for (i = 0; i < ARRAY_SIZE(ddr_config_table); i++) + if (CONFIG_BFIN_GET_DCLK_M == ddr_config_table[i].ddr_clk) + break; +#endif + +#ifndef CONFIG_DMC_DDRCFG + bfin_write_DMC0_CFG(ddr_config_table[i].dmc_ddrcfg); +#else + bfin_write_DMC0_CFG(CONFIG_DMC_DDRCFG); +#endif +#ifndef CONFIG_DMC_DDRTR0 + bfin_write_DMC0_TR0(ddr_config_table[i].dmc_ddrtr0); +#else + bfin_write_DMC0_TR0(CONFIG_DMC_DDRTR0); +#endif +#ifndef CONFIG_DMC_DDRTR1 + bfin_write_DMC0_TR1(ddr_config_table[i].dmc_ddrtr1); +#else + bfin_write_DMC0_TR1(CONFIG_DMC_DDRTR1); +#endif +#ifndef CONFIG_DMC_DDRTR2 + bfin_write_DMC0_TR2(ddr_config_table[i].dmc_ddrtr2); +#else + bfin_write_DMC0_TR2(CONFIG_DMC_DDRTR2); +#endif +#ifndef CONFIG_DMC_DDRMR + bfin_write_DMC0_MR(ddr_config_table[i].dmc_ddrmr); +#else + bfin_write_DMC0_MR(CONFIG_DMC_DDRMR); +#endif +#ifndef CONFIG_DMC_DDREMR1 + bfin_write_DMC0_EMR1(ddr_config_table[i].dmc_ddrmr1); +#else + bfin_write_DMC0_EMR1(CONFIG_DMC_DDREMR1); +#endif +#ifndef CONFIG_DMC_DDRCTL + bfin_write_DMC0_CTL(ddr_config_table[i].dmc_ddrctl); +#else + bfin_write_DMC0_CTL(CONFIG_DMC_DDRCTL); +#endif + + SSYNC(); + while (!(bfin_read_DMC0_STAT() & MEMINITDONE)) + continue; + + dlldatacycle = (bfin_read_DMC0_STAT() & PHYRDPHASE) >> + PHYRDPHASE_OFFSET; + dll_ctl = bfin_read_DMC0_DLLCTL(); + dll_ctl &= 0x0ff; + bfin_write_DMC0_DLLCTL(dll_ctl | (dlldatacycle << DATACYC_OFFSET)); + + SSYNC(); + while (!(bfin_read_DMC0_STAT() & DLLCALDONE)) + continue; + serial_putc('!'); + +#else /* __ADSPBF60x__ */ + /* Program the external memory controller before we come out of * self-refresh. This only works with our SDRAM controller. */ @@ -583,6 +887,7 @@ program_memory_controller(ADI_BOOT_DATA *bs, bool put_into_srfs) # endif #endif +#endif /* __ADSPBF60x__ */ serial_putc('e'); } @@ -595,7 +900,46 @@ check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs) return; serial_putc('b'); +#ifdef __ADSPBF60x__ + if (bfin_read32(DPM0_RESTORE0) != 0) { + uint32_t reg = bfin_read_DMC0_CTL(); + reg &= ~0x8; + bfin_write_DMC0_CTL(reg); + + while ((bfin_read_DMC0_STAT() & 0x8)) + continue; + while (!(bfin_read_DMC0_STAT() & 0x1)) + continue; + + serial_putc('z'); + uint32_t *hibernate_magic = bfin_read32(DPM0_RESTORE4); + SSYNC(); /* make sure memory controller is done */ + if (hibernate_magic[0] == 0xDEADBEEF) { + serial_putc('c'); + SSYNC(); + bfin_write_EVT15(hibernate_magic[1]); + bfin_write_IMASK(EVT_IVG15); + __asm__ __volatile__ ( + /* load reti early to avoid anomaly 281 */ + "reti = %2;" + /* clear hibernate magic */ + "[%0] = %1;" + /* load stack pointer */ + "SP = [%0 + 8];" + /* lower ourselves from reset ivg to ivg15 */ + "raise 15;" + "nop;nop;nop;" + "rti;" + : + : "p"(hibernate_magic), + "d"(0x2000 /* jump.s 0 */), + "d"(0xffa00000) + ); + } + + } +#else /* Are we coming out of hibernate (suspend to memory) ? * The memory layout is: * 0x0: hibernate magic for anomaly 307 (0xDEADBEEF) @@ -606,7 +950,8 @@ check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs) */ if (ANOMALY_05000307 || vr_ctl & 0x8000) { uint32_t *hibernate_magic = 0; - __builtin_bfin_ssync(); /* make sure memory controller is done */ + + SSYNC(); if (hibernate_magic[0] == 0xDEADBEEF) { serial_putc('c'); bfin_write_EVT15(hibernate_magic[1]); @@ -627,6 +972,7 @@ check_hibernation(ADI_BOOT_DATA *bs, u16 vr_ctl, bool put_into_srfs) } serial_putc('d'); } +#endif serial_putc('e'); } diff --git a/arch/blackfin/cpu/initcode.h b/arch/blackfin/cpu/initcode.h index e0aad6de0f..1fec7f3d85 100644 --- a/arch/blackfin/cpu/initcode.h +++ b/arch/blackfin/cpu/initcode.h @@ -15,6 +15,8 @@ # define serial_putc(c) #endif +#ifndef __ADSPBF60x__ + #ifndef CONFIG_EBIU_RSTCTL_VAL # define CONFIG_EBIU_RSTCTL_VAL 0 /* only MDDRENABLE is useful */ #endif @@ -30,6 +32,8 @@ # error invalid EBIU_DDRQUE value: must not set reserved bits #endif +#endif /* __ADSPBF60x__ */ + __attribute__((always_inline)) static inline void program_async_controller(ADI_BOOT_DATA *bs) { @@ -45,10 +49,13 @@ program_async_controller(ADI_BOOT_DATA *bs) serial_putc('a'); +#ifdef __ADSPBF60x__ /* Program the async banks controller. */ +#ifdef EBIU_AMGCTL bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL); bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL); bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); +#endif serial_putc('b'); @@ -66,6 +73,51 @@ program_async_controller(ADI_BOOT_DATA *bs) #endif serial_putc('c'); + +#else /* __ADSPBF60x__ */ + /* Program the static memory controller. */ +# ifdef CONFIG_SMC_GCTL_VAL + bfin_write_SMC_GCTL(CONFIG_SMC_GCTL_VAL); +# endif +# ifdef CONFIG_SMC_B0CTL_VAL + bfin_write_SMC_B0CTL(CONFIG_SMC_B0CTL_VAL); +# endif +# ifdef CONFIG_SMC_B0TIM_VAL + bfin_write_SMC_B0TIM(CONFIG_SMC_B0TIM_VAL); +# endif +# ifdef CONFIG_SMC_B0ETIM_VAL + bfin_write_SMC_B0ETIM(CONFIG_SMC_B0ETIM_VAL); +# endif +# ifdef CONFIG_SMC_B1CTL_VAL + bfin_write_SMC_B1CTL(CONFIG_SMC_B1CTL_VAL); +# endif +# ifdef CONFIG_SMC_B1TIM_VAL + bfin_write_SMC_B1TIM(CONFIG_SMC_B1TIM_VAL); +# endif +# ifdef CONFIG_SMC_B1ETIM_VAL + bfin_write_SMC_B1ETIM(CONFIG_SMC_B1ETIM_VAL); +# endif +# ifdef CONFIG_SMC_B2CTL_VAL + bfin_write_SMC_B2CTL(CONFIG_SMC_B2CTL_VAL); +# endif +# ifdef CONFIG_SMC_B2TIM_VAL + bfin_write_SMC_B2TIM(CONFIG_SMC_B2TIM_VAL); +# endif +# ifdef CONFIG_SMC_B2ETIM_VAL + bfin_write_SMC_B2ETIM(CONFIG_SMC_B2ETIM_VAL); +# endif +# ifdef CONFIG_SMC_B3CTL_VAL + bfin_write_SMC_B3CTL(CONFIG_SMC_B3CTL_VAL); +# endif +# ifdef CONFIG_SMC_B3TIM_VAL + bfin_write_SMC_B3TIM(CONFIG_SMC_B3TIM_VAL); +# endif +# ifdef CONFIG_SMC_B3ETIM_VAL + bfin_write_SMC_B3ETIM(CONFIG_SMC_B3ETIM_VAL); +# endif + +#endif + serial_putc('d'); } #endif diff --git a/arch/blackfin/cpu/reset.c b/arch/blackfin/cpu/reset.c index ff39035de2..b6718d3bb5 100644 --- a/arch/blackfin/cpu/reset.c +++ b/arch/blackfin/cpu/reset.c @@ -23,6 +23,7 @@ __attribute__ ((__l1_text__, __noreturn__)) static void bfin_reset(void) { +#ifdef SWRST /* Wait for completion of "system" events such as cache line * line fills so that we avoid infinite stalls later on as * much as possible. This code is in L1, so it won't trigger @@ -66,10 +67,15 @@ static void bfin_reset(void) : "a" (15 * 1) : "LC1", "LB1", "LT1" ); +#endif while (1) +#if defined(__ADSPBF60x__) + bfin_write_RCU0_CTL(0x1); +#else /* Issue core reset */ asm("raise 1"); +#endif } /* We need to trampoline ourselves up into L1 since our linker diff --git a/arch/blackfin/cpu/serial.c b/arch/blackfin/cpu/serial.c index 64340ec67d..9847e9f2c5 100644 --- a/arch/blackfin/cpu/serial.c +++ b/arch/blackfin/cpu/serial.c @@ -43,7 +43,6 @@ #include <serial.h> #include <linux/compiler.h> #include <asm/blackfin.h> -#include <asm/mach-common/bits/uart.h> DECLARE_GLOBAL_DATA_PTR; @@ -52,8 +51,8 @@ DECLARE_GLOBAL_DATA_PTR; #include "serial.h" #ifdef CONFIG_DEBUG_SERIAL -static uint16_t cached_lsr[256]; -static uint16_t cached_rbr[256]; +static uart_lsr_t cached_lsr[256]; +static uart_lsr_t cached_rbr[256]; static size_t cache_count; /* The LSR is read-to-clear on some parts, so we have to make sure status @@ -61,10 +60,10 @@ static size_t cache_count; * works around anomaly 05000099 at the same time by keeping a cumulative * tally of all the status bits. */ -static uint16_t uart_lsr_save; -static uint16_t uart_lsr_read(uint32_t uart_base) +static uart_lsr_t uart_lsr_save; +static uart_lsr_t uart_lsr_read(uint32_t uart_base) { - uint16_t lsr = bfin_read(&pUART->lsr); + uart_lsr_t lsr = _lsr_read(pUART); uart_lsr_save |= (lsr & (OE|PE|FE|BI)); return lsr | uart_lsr_save; } @@ -72,20 +71,20 @@ static uint16_t uart_lsr_read(uint32_t uart_base) static void uart_lsr_clear(uint32_t uart_base) { uart_lsr_save = 0; - bfin_write(&pUART->lsr, bfin_read(&pUART->lsr) | -1); + _lsr_write(pUART, -1); } #else /* When debugging is disabled, we only care about the DR bit, so if other * bits get set/cleared, we don't really care since we don't read them * anyways (and thus anomaly 05000099 is irrelevant). */ -static inline uint16_t uart_lsr_read(uint32_t uart_base) +static inline uart_lsr_t uart_lsr_read(uint32_t uart_base) { - return bfin_read(&pUART->lsr); + return _lsr_read(pUART); } static void uart_lsr_clear(uint32_t uart_base) { - bfin_write(&pUART->lsr, bfin_read(&pUART->lsr) | -1); + _lsr_write(pUART, -1); } #endif @@ -127,20 +126,14 @@ static int uart_getc(uint32_t uart_base) #ifdef CONFIG_DEBUG_SERIAL /* grab & clear the LSR */ - uint16_t uart_lsr_val = uart_lsr_read(uart_base); + uart_lsr_t uart_lsr_val = uart_lsr_read(uart_base); cached_lsr[cache_count] = uart_lsr_val; cached_rbr[cache_count] = uart_rbr_val; cache_count = (cache_count + 1) % ARRAY_SIZE(cached_lsr); if (uart_lsr_val & (OE|PE|FE|BI)) { - uint16_t dll, dlh; printf("\n[SERIAL ERROR]\n"); - ACCESS_LATCH(); - dll = bfin_read(&pUART->dll); - dlh = bfin_read(&pUART->dlh); - ACCESS_PORT_IER(); - printf("\tDLL=0x%x DLH=0x%x\n", dll, dlh); do { --cache_count; printf("\t%3zu: RBR=0x%02x LSR=0x%02x\n", cache_count, @@ -160,6 +153,8 @@ static int uart_getc(uint32_t uart_base) # define LOOP(x) #endif +#if BFIN_UART_HW_VER < 4 + LOOP( static void uart_loop(uint32_t uart_base, int state) { @@ -178,6 +173,28 @@ static void uart_loop(uint32_t uart_base, int state) } ) +#else + +LOOP( +static void uart_loop(uint32_t uart_base, int state) +{ + u32 control; + + /* Drain the TX fifo first so bytes don't come back */ + while (!(uart_lsr_read(uart_base) & TEMT)) + continue; + + control = bfin_read(&pUART->control); + if (state) + control |= LOOP_ENA | MRTS; + else + control &= ~(LOOP_ENA | MRTS); + bfin_write(&pUART->control, control); +} +) + +#endif + #ifdef CONFIG_SYS_BFIN_UART static void uart_puts(uint32_t uart_base, const char *s) @@ -246,16 +263,16 @@ struct serial_device bfin_serial##n##_device = { \ LOOP(.loop = uart##n##_loop) \ }; -#ifdef UART0_DLL +#ifdef UART0_RBR DECL_BFIN_UART(0) #endif -#ifdef UART1_DLL +#ifdef UART1_RBR DECL_BFIN_UART(1) #endif -#ifdef UART2_DLL +#ifdef UART2_RBR DECL_BFIN_UART(2) #endif -#ifdef UART3_DLL +#ifdef UART3_RBR DECL_BFIN_UART(3) #endif @@ -274,16 +291,16 @@ __weak struct serial_device *default_serial_console(void) void bfin_serial_initialize(void) { -#ifdef UART0_DLL +#ifdef UART0_RBR serial_register(&bfin_serial0_device); #endif -#ifdef UART1_DLL +#ifdef UART1_RBR serial_register(&bfin_serial1_device); #endif -#ifdef UART2_DLL +#ifdef UART2_RBR serial_register(&bfin_serial2_device); #endif -#ifdef UART3_DLL +#ifdef UART3_RBR serial_register(&bfin_serial3_device); #endif } @@ -293,7 +310,7 @@ void bfin_serial_initialize(void) /* Symbol for our assembly to call. */ void serial_set_baud(uint32_t baud) { - serial_early_set_baud(UART_DLL, baud); + serial_early_set_baud(UART_BASE, baud); } /* Symbol for common u-boot code to call. @@ -307,7 +324,7 @@ void serial_setbrg(void) /* Symbol for our assembly to call. */ void serial_initialize(void) { - serial_early_init(UART_DLL); + serial_early_init(UART_BASE); } /* Symbol for common u-boot code to call. */ @@ -315,23 +332,23 @@ int serial_init(void) { serial_initialize(); serial_setbrg(); - uart_lsr_clear(UART_DLL); + uart_lsr_clear(UART_BASE); return 0; } int serial_tstc(void) { - return uart_tstc(UART_DLL); + return uart_tstc(UART_BASE); } int serial_getc(void) { - return uart_getc(UART_DLL); + return uart_getc(UART_BASE); } void serial_putc(const char c) { - uart_putc(UART_DLL, c); + uart_putc(UART_BASE, c); } void serial_puts(const char *s) @@ -343,7 +360,7 @@ void serial_puts(const char *s) LOOP( void serial_loop(int state) { - uart_loop(UART_DLL, state); + uart_loop(UART_BASE, state); } ) diff --git a/arch/blackfin/cpu/serial.h b/arch/blackfin/cpu/serial.h index 8a076ddc92..9200339668 100644 --- a/arch/blackfin/cpu/serial.h +++ b/arch/blackfin/cpu/serial.h @@ -3,7 +3,7 @@ * any functions defined here must be always_inline since * initcode cannot have function calls. * - * Copyright (c) 2004-2007 Analog Devices Inc. + * Copyright (c) 2004-2011 Analog Devices Inc. * * Licensed under the GPL-2 or later. */ @@ -12,7 +12,7 @@ #define __BFIN_CPU_SERIAL_H__ #include <asm/blackfin.h> -#include <asm/mach-common/bits/uart.h> +#include <asm/portmux.h> #ifndef CONFIG_UART_CONSOLE # define CONFIG_UART_CONSOLE 0 @@ -24,88 +24,34 @@ # define BFIN_DEBUG_EARLY_SERIAL 0 #endif -#ifndef __ASSEMBLY__ - -#include <asm/portmux.h> - -#define LOB(x) ((x) & 0xFF) -#define HIB(x) (((x) >> 8) & 0xFF) - -#if defined(__ADSPBF50x__) || defined(__ADSPBF54x__) +#if defined(__ADSPBF60x__) +# define BFIN_UART_HW_VER 4 +#elif defined(__ADSPBF50x__) || defined(__ADSPBF54x__) # define BFIN_UART_HW_VER 2 #else # define BFIN_UART_HW_VER 1 #endif -/* - * All Blackfin system MMRs are padded to 32bits even if the register - * itself is only 16bits. So use a helper macro to streamline this. - */ -#define __BFP(m) u16 m; u16 __pad_##m -struct bfin_mmr_serial { -#if BFIN_UART_HW_VER == 2 - __BFP(dll); - __BFP(dlh); - __BFP(gctl); - __BFP(lcr); - __BFP(mcr); - __BFP(lsr); - __BFP(msr); - __BFP(scr); - __BFP(ier_set); - __BFP(ier_clear); - __BFP(thr); - __BFP(rbr); -#else - union { - u16 dll; - u16 thr; - const u16 rbr; - }; - const u16 __spad0; - union { - u16 dlh; - u16 ier; - }; - const u16 __spad1; - const __BFP(iir); - __BFP(lcr); - __BFP(mcr); - __BFP(lsr); - __BFP(msr); - __BFP(scr); - const u32 __spad2; - __BFP(gctl); -#endif -}; -#undef __BFP - #define __PASTE_UART(num, pfx, sfx) pfx##num##_##sfx #define _PASTE_UART(num, pfx, sfx) __PASTE_UART(num, pfx, sfx) -#define MMR_UART(n) _PASTE_UART(n, UART, DLL) #define _P_UART(n, pin) _PASTE_UART(n, P_UART, pin) #define P_UART(pin) _P_UART(CONFIG_UART_CONSOLE, pin) -#ifndef UART_DLL -# define UART_DLL MMR_UART(CONFIG_UART_CONSOLE) -#else -# define UART0_DLL UART_DLL -# if CONFIG_UART_CONSOLE != 0 -# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART -# endif -#endif #define pUART ((volatile struct bfin_mmr_serial *)uart_base) -#if BFIN_UART_HW_VER == 2 -# define ACCESS_LATCH() -# define ACCESS_PORT_IER() +#ifndef __ASSEMBLY__ +__attribute__((always_inline)) +static inline void serial_do_portmux(void); +#endif + +#if BFIN_UART_HW_VER < 4 +# include "serial1.h" #else -# define ACCESS_LATCH() \ - bfin_write(&pUART->lcr, bfin_read(&pUART->lcr) | DLAB) -# define ACCESS_PORT_IER() \ - bfin_write(&pUART->lcr, bfin_read(&pUART->lcr) & ~DLAB) +# include "serial4.h" #endif +#ifndef __ASSEMBLY__ + __attribute__((always_inline)) static inline void serial_do_portmux(void) { @@ -115,143 +61,7 @@ static inline void serial_do_portmux(void) return; } -#if defined(__ADSPBF50x__) -# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \ - bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_1 | PORT_x_MUX_##mux_rx##_FUNC_1); \ - bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); - switch (CONFIG_UART_CONSOLE) { - case 0: DO_MUX(G, 7, 7, 12, 13); break; /* Port G; mux 7; PG12 and PG13 */ - case 1: DO_MUX(F, 3, 3, 6, 7); break; /* Port F; mux 3; PF6 and PF7 */ - } - SSYNC(); -#elif defined(__ADSPBF51x__) -# define DO_MUX(port, mux_tx, mux_rx, tx, rx) \ - bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##mux_tx##_MASK | PORT_x_MUX_##mux_rx##_MASK)) | PORT_x_MUX_##mux_tx##_FUNC_2 | PORT_x_MUX_##mux_rx##_FUNC_2); \ - bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); - switch (CONFIG_UART_CONSOLE) { - case 0: DO_MUX(G, 5, 5, 9, 10); break; /* Port G; mux 5; PG9 and PG10 */ - case 1: DO_MUX(F, 2, 3, 14, 15); break; /* Port H; mux 2/3; PH14 and PH15 */ - } - SSYNC(); -#elif defined(__ADSPBF52x__) -# define DO_MUX(port, mux, tx, rx) \ - bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~PORT_x_MUX_##mux##_MASK) | PORT_x_MUX_##mux##_FUNC_3); \ - bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); - switch (CONFIG_UART_CONSOLE) { - case 0: DO_MUX(G, 2, 7, 8); break; /* Port G; mux 2; PG2 and PG8 */ - case 1: DO_MUX(F, 5, 14, 15); break; /* Port F; mux 5; PF14 and PF15 */ - } - SSYNC(); -#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) - const uint16_t func[] = { PFDE, PFTE, }; - bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~func[CONFIG_UART_CONSOLE]); - bfin_write_PORTF_FER(bfin_read_PORTF_FER() | - (1 << P_IDENT(P_UART(RX))) | - (1 << P_IDENT(P_UART(TX)))); - SSYNC(); -#elif defined(__ADSPBF54x__) -# define DO_MUX(port, tx, rx) \ - bfin_write_PORT##port##_MUX((bfin_read_PORT##port##_MUX() & ~(PORT_x_MUX_##tx##_MASK | PORT_x_MUX_##rx##_MASK)) | PORT_x_MUX_##tx##_FUNC_1 | PORT_x_MUX_##rx##_FUNC_1); \ - bfin_write_PORT##port##_FER(bfin_read_PORT##port##_FER() | P##port##tx | P##port##rx); - switch (CONFIG_UART_CONSOLE) { - case 0: DO_MUX(E, 7, 8); break; /* Port E; PE7 and PE8 */ - case 1: DO_MUX(H, 0, 1); break; /* Port H; PH0 and PH1 */ - case 2: DO_MUX(B, 4, 5); break; /* Port B; PB4 and PB5 */ - case 3: DO_MUX(B, 6, 7); break; /* Port B; PB6 and PB7 */ - } - SSYNC(); -#elif defined(__ADSPBF561__) - /* UART pins could be GPIO, but they aren't pin muxed. */ -#else -# if (P_UART(RX) & P_DEFINED) || (P_UART(TX) & P_DEFINED) -# error "missing portmux logic for UART" -# endif -#endif -} - -__attribute__((always_inline)) -static inline int uart_init(uint32_t uart_base) -{ - /* always enable UART -- avoids anomalies 05000309 and 05000350 */ - bfin_write(&pUART->gctl, UCEN); - - /* Set LCR to Word Lengh 8-bit word select */ - bfin_write(&pUART->lcr, WLS_8); - - SSYNC(); - - return 0; -} - -__attribute__((always_inline)) -static inline int serial_early_init(uint32_t uart_base) -{ - /* handle portmux crap on different Blackfins */ - serial_do_portmux(); - - return uart_init(uart_base); -} - -__attribute__((always_inline)) -static inline int serial_early_uninit(uint32_t uart_base) -{ - /* disable the UART by clearing UCEN */ - bfin_write(&pUART->gctl, 0); - - return 0; -} - -__attribute__((always_inline)) -static inline void serial_early_put_div(uint32_t uart_base, uint16_t divisor) -{ - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH(); - SSYNC(); - - /* Program the divisor to get the baud rate we want */ - bfin_write(&pUART->dll, LOB(divisor)); - bfin_write(&pUART->dlh, HIB(divisor)); - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER(); - SSYNC(); -} - -__attribute__((always_inline)) -static inline uint16_t serial_early_get_div(void) -{ - uint32_t uart_base = UART_DLL; - - /* Set DLAB in LCR to Access DLL and DLH */ - ACCESS_LATCH(); - SSYNC(); - - uint8_t dll = bfin_read(&pUART->dll); - uint8_t dlh = bfin_read(&pUART->dlh); - uint16_t divisor = (dlh << 8) | dll; - - /* Clear DLAB in LCR to Access THR RBR IER */ - ACCESS_PORT_IER(); - SSYNC(); - - return divisor; -} - -/* We cannot use get_sclk() early on as it uses caches in external memory */ -#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL) -# define get_sclk() (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV) -#endif - -__attribute__((always_inline)) -static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) -{ - /* Translate from baud into divisor in terms of SCLK. The - * weird multiplication is to make sure we over sample just - * a little rather than under sample the incoming signals. - */ - serial_early_put_div(uart_base, - (get_sclk() + (baud * 8)) / (baud * 16) - ANOMALY_05000230); + serial_early_do_portmux(); } #ifndef BFIN_IN_INITCODE diff --git a/arch/blackfin/cpu/serial1.h b/arch/blackfin/cpu/serial1.h new file mode 100644 index 0000000000..a20175bc7f --- /dev/null +++ b/arch/blackfin/cpu/serial1.h @@ -0,0 +1,348 @@ +/* + * serial.h - common serial defines for early debug and serial driver. + * any functions defined here must be always_inline since + * initcode cannot have function calls. + * + * Copyright (c) 2004-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_CPU_SERIAL1_H__ +#define __BFIN_CPU_SERIAL1_H__ + +#include <asm/mach-common/bits/uart.h> + +#ifndef __ASSEMBLY__ + +#define MMR_UART(n) _PASTE_UART(n, UART, DLL) +#ifdef UART_DLL +# define UART0_DLL UART_DLL +# if CONFIG_UART_CONSOLE != 0 +# error CONFIG_UART_CONSOLE must be 0 on parts with only one UART +# endif +#endif +#define UART_BASE MMR_UART(CONFIG_UART_CONSOLE) + +#define LOB(x) ((x) & 0xFF) +#define HIB(x) (((x) >> 8) & 0xFF) + +/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +struct bfin_mmr_serial { +#if BFIN_UART_HW_VER == 2 + u16 dll; + u16 __pad_0; + u16 dlh; + u16 __pad_1; + u16 gctl; + u16 __pad_2; + u16 lcr; + u16 __pad_3; + u16 mcr; + u16 __pad_4; + u16 lsr; + u16 __pad_5; + u16 msr; + u16 __pad_6; + u16 scr; + u16 __pad_7; + u16 ier_set; + u16 __pad_8; + u16 ier_clear; + u16 __pad_9; + u16 thr; + u16 __pad_10; + u16 rbr; + u16 __pad_11; +#else + union { + u16 dll; + u16 thr; + const u16 rbr; + }; + const u16 __spad0; + union { + u16 dlh; + u16 ier; + }; + const u16 __spad1; + const u16 iir; + u16 __pad_0; + u16 lcr; + u16 __pad_1; + u16 mcr; + u16 __pad_2; + u16 lsr; + u16 __pad_3; + u16 msr; + u16 __pad_4; + u16 scr; + u16 __pad_5; + const u32 __spad2; + u16 gctl; + u16 __pad_6; +#endif +}; + +#define uart_lsr_t uint32_t +#define _lsr_read(p) bfin_read(&p->lsr) +#define _lsr_write(p, v) bfin_write(&p->lsr, v) + +#if BFIN_UART_HW_VER == 2 +# define ACCESS_LATCH() +# define ACCESS_PORT_IER() +#else +# define ACCESS_LATCH() bfin_write_or(&pUART->lcr, DLAB) +# define ACCESS_PORT_IER() bfin_write_and(&pUART->lcr, ~DLAB) +#endif + +__attribute__((always_inline)) +static inline void serial_early_do_mach_portmux(char port, int mux_mask, + int mux_func, int port_pin) +{ + switch (port) { +#if defined(__ADSPBF54x__) + case 'B': + bfin_write_PORTB_MUX((bfin_read_PORTB_MUX() & + ~mux_mask) | mux_func); + bfin_write_PORTB_FER(bfin_read_PORTB_FER() | port_pin); + break; + case 'E': + bfin_write_PORTE_MUX((bfin_read_PORTE_MUX() & + ~mux_mask) | mux_func); + bfin_write_PORTE_FER(bfin_read_PORTE_FER() | port_pin); + break; +#endif +#if defined(__ADSPBF50x__) || defined(__ADSPBF51x__) || defined(__ADSPBF52x__) + case 'F': + bfin_write_PORTF_MUX((bfin_read_PORTF_MUX() & + ~mux_mask) | mux_func); + bfin_write_PORTF_FER(bfin_read_PORTF_FER() | port_pin); + break; + case 'G': + bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & + ~mux_mask) | mux_func); + bfin_write_PORTG_FER(bfin_read_PORTG_FER() | port_pin); + break; + case 'H': + bfin_write_PORTH_MUX((bfin_read_PORTH_MUX() & + ~mux_mask) | mux_func); + bfin_write_PORTH_FER(bfin_read_PORTH_FER() | port_pin); + break; +#endif + default: + break; + } +} + +__attribute__((always_inline)) +static inline void serial_early_do_portmux(void) +{ +#if defined(__ADSPBF50x__) + switch (CONFIG_UART_CONSOLE) { + case 0: + serial_early_do_mach_portmux('G', PORT_x_MUX_7_MASK, + PORT_x_MUX_7_FUNC_1, PG12); /* TX: G; mux 7; func 1; PG12 */ + serial_early_do_mach_portmux('G', PORT_x_MUX_7_MASK, + PORT_x_MUX_7_FUNC_1, PG13); /* RX: G; mux 7; func 1; PG13 */ + break; + case 1: + serial_early_do_mach_portmux('F', PORT_x_MUX_3_MASK, + PORT_x_MUX_3_FUNC_1, PF7); /* TX: F; mux 3; func 1; PF6 */ + serial_early_do_mach_portmux('F', PORT_x_MUX_3_MASK, + PORT_x_MUX_3_FUNC_1, PF6); /* RX: F; mux 3; func 1; PF7 */ + break; + } +#elif defined(__ADSPBF51x__) + switch (CONFIG_UART_CONSOLE) { + case 0: + serial_early_do_mach_portmux('G', PORT_x_MUX_5_MASK, + PORT_x_MUX_5_FUNC_2, PG9); /* TX: G; mux 5; func 2; PG9 */ + serial_early_do_mach_portmux('G', PORT_x_MUX_5_MASK, + PORT_x_MUX_5_FUNC_2, PG10); /* RX: G; mux 5; func 2; PG10 */ + break; + case 1: + serial_early_do_mach_portmux('H', PORT_x_MUX_3_MASK, + PORT_x_MUX_3_FUNC_2, PH7); /* TX: H; mux 3; func 2; PH6 */ + serial_early_do_mach_portmux('H', PORT_x_MUX_3_MASK, + PORT_x_MUX_3_FUNC_2, PH6); /* RX: H; mux 3; func 2; PH7 */ + break; + } +#elif defined(__ADSPBF52x__) + switch (CONFIG_UART_CONSOLE) { + case 0: + serial_early_do_mach_portmux('G', PORT_x_MUX_2_MASK, + PORT_x_MUX_2_FUNC_3, PG7); /* TX: G; mux 2; func 3; PG7 */ + serial_early_do_mach_portmux('G', PORT_x_MUX_2_MASK, + PORT_x_MUX_2_FUNC_3, PG8); /* RX: G; mux 2; func 3; PG8 */ + break; + case 1: + serial_early_do_mach_portmux('F', PORT_x_MUX_5_MASK, + PORT_x_MUX_5_FUNC_3, PF14); /* TX: F; mux 5; func 3; PF14 */ + serial_early_do_mach_portmux('F', PORT_x_MUX_5_MASK, + PORT_x_MUX_5_FUNC_3, PF15); /* RX: F; mux 5; func 3; PF15 */ + break; + } +#elif defined(__ADSPBF537__) || defined(__ADSPBF536__) || defined(__ADSPBF534__) + const uint16_t func[] = { PFDE, PFTE, }; + bfin_write_PORT_MUX(bfin_read_PORT_MUX() & ~func[CONFIG_UART_CONSOLE]); + bfin_write_PORTF_FER(bfin_read_PORTF_FER() | + (1 << P_IDENT(P_UART(RX))) | + (1 << P_IDENT(P_UART(TX)))); +#elif defined(__ADSPBF54x__) + switch (CONFIG_UART_CONSOLE) { + case 0: + serial_early_do_mach_portmux('E', PORT_x_MUX_7_MASK, + PORT_x_MUX_7_FUNC_1, PE7); /* TX: E; mux 7; func 1; PE7 */ + serial_early_do_mach_portmux('E', PORT_x_MUX_8_MASK, + PORT_x_MUX_8_FUNC_1, PE8); /* RX: E; mux 8; func 1; PE8 */ + break; + case 1: + serial_early_do_mach_portmux('H', PORT_x_MUX_0_MASK, + PORT_x_MUX_0_FUNC_1, PH0); /* TX: H; mux 0; func 1; PH0 */ + serial_early_do_mach_portmux('H', PORT_x_MUX_1_MASK, + PORT_x_MUX_1_FUNC_1, PH1); /* RX: H; mux 1; func 1; PH1 */ + break; + case 2: + serial_early_do_mach_portmux('B', PORT_x_MUX_4_MASK, + PORT_x_MUX_4_FUNC_1, PB4); /* TX: B; mux 4; func 1; PB4 */ + serial_early_do_mach_portmux('B', PORT_x_MUX_5_MASK, + PORT_x_MUX_5_FUNC_1, PB5); /* RX: B; mux 5; func 1; PB5 */ + break; + case 3: + serial_early_do_mach_portmux('B', PORT_x_MUX_6_MASK, + PORT_x_MUX_6_FUNC_1, PB6); /* TX: B; mux 6; func 1; PB6 */ + serial_early_do_mach_portmux('B', PORT_x_MUX_7_MASK, + PORT_x_MUX_7_FUNC_1, PB7); /* RX: B; mux 7; func 1; PB7 */ + break; + } +#elif defined(__ADSPBF561__) + /* UART pins could be GPIO, but they aren't pin muxed. */ +#else +# if (P_UART(RX) & P_DEFINED) || (P_UART(TX) & P_DEFINED) +# error "missing portmux logic for UART" +# endif +#endif + SSYNC(); +} + +__attribute__((always_inline)) +static inline uint32_t uart_sclk(void) +{ +#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL) + /* We cannot use get_sclk() early on as it uses + * caches in external memory + */ + return CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV; +#else + return get_sclk(); +#endif +} + +__attribute__((always_inline)) +static inline int uart_init(uint32_t uart_base) +{ + /* always enable UART -- avoids anomalies 05000309 and 05000350 */ + bfin_write(&pUART->gctl, UCEN); + + /* Set LCR to Word Lengh 8-bit word select */ + bfin_write(&pUART->lcr, WLS_8); + + SSYNC(); + + return 0; +} + +__attribute__((always_inline)) +static inline int serial_early_init(uint32_t uart_base) +{ + /* handle portmux crap on different Blackfins */ + serial_do_portmux(); + + return uart_init(uart_base); +} + +__attribute__((always_inline)) +static inline int serial_early_uninit(uint32_t uart_base) +{ + /* disable the UART by clearing UCEN */ + bfin_write(&pUART->gctl, 0); + + return 0; +} + +__attribute__((always_inline)) +static inline int serial_early_enabled(uint32_t uart_base) +{ + return bfin_read(&pUART->gctl) & UCEN; +} + +__attribute__((always_inline)) +static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) +{ + /* Translate from baud into divisor in terms of SCLK. The + * weird multiplication is to make sure we over sample just + * a little rather than under sample the incoming signals. + */ + uint16_t divisor = (uart_sclk() + (baud * 8)) / (baud * 16) - + ANOMALY_05000230; + + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + /* Program the divisor to get the baud rate we want */ + bfin_write(&pUART->dll, LOB(divisor)); + bfin_write(&pUART->dlh, HIB(divisor)); + SSYNC(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); +} + +__attribute__((always_inline)) +static inline void serial_early_put_div(uint16_t divisor) +{ + uint32_t uart_base = UART_BASE; + + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + /* Program the divisor to get the baud rate we want */ + bfin_write(&pUART->dll, LOB(divisor)); + bfin_write(&pUART->dlh, HIB(divisor)); + SSYNC(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); +} + +__attribute__((always_inline)) +static inline uint16_t serial_early_get_div(void) +{ + uint32_t uart_base = UART_BASE; + + /* Set DLAB in LCR to Access DLL and DLH */ + ACCESS_LATCH(); + SSYNC(); + + uint8_t dll = bfin_read(&pUART->dll); + uint8_t dlh = bfin_read(&pUART->dlh); + uint16_t divisor = (dlh << 8) | dll; + + /* Clear DLAB in LCR to Access THR RBR IER */ + ACCESS_PORT_IER(); + SSYNC(); + + return divisor; +} + +#endif + +#endif diff --git a/arch/blackfin/cpu/serial4.h b/arch/blackfin/cpu/serial4.h new file mode 100644 index 0000000000..887845c186 --- /dev/null +++ b/arch/blackfin/cpu/serial4.h @@ -0,0 +1,161 @@ +/* + * serial.h - common serial defines for early debug and serial driver. + * any functions defined here must be always_inline since + * initcode cannot have function calls. + * + * Copyright (c) 2004-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_CPU_SERIAL4_H__ +#define __BFIN_CPU_SERIAL4_H__ + +#include <asm/mach-common/bits/uart4.h> + +#ifndef __ASSEMBLY__ + +#define MMR_UART(n) _PASTE_UART(n, UART, REVID) +#define UART_BASE MMR_UART(CONFIG_UART_CONSOLE) + +struct bfin_mmr_serial { + u32 revid; + u32 control; + u32 status; + u32 scr; + u32 clock; + u32 emask; + u32 emaskst; + u32 emaskcl; + u32 rbr; + u32 thr; + u32 taip; + u32 tsr; + u32 rsr; + u32 txdiv_cnt; + u32 rxdiv_cnt; +}; +#define uart_lsr_t uint32_t +#define _lsr_read(p) bfin_read(&p->status) +#define _lsr_write(p, v) bfin_write(&p->status, v) + +__attribute__((always_inline)) +static inline void serial_early_do_mach_portmux(char port, int mux_mask, + int mux_func, int port_pin) +{ + switch (port) { + case 'D': + bfin_write_PORTD_MUX((bfin_read_PORTD_MUX() & + ~mux_mask) | mux_func); + bfin_write_PORTD_FER_SET(port_pin); + break; + case 'G': + bfin_write_PORTG_MUX((bfin_read_PORTG_MUX() & + ~mux_mask) | mux_func); + bfin_write_PORTG_FER_SET(port_pin); + break; + } +} + +__attribute__((always_inline)) +static inline void serial_early_do_portmux(void) +{ +#if defined(__ADSPBF60x__) + switch (CONFIG_UART_CONSOLE) { + case 0: + serial_early_do_mach_portmux('D', PORT_x_MUX_7_MASK, + PORT_x_MUX_7_FUNC_2, PD7); /* TX: D; mux 7; func 2; PD7 */ + serial_early_do_mach_portmux('D', PORT_x_MUX_8_MASK, + PORT_x_MUX_8_FUNC_2, PD8); /* RX: D; mux 8; func 2; PD8 */ + break; + case 1: + serial_early_do_mach_portmux('G', PORT_x_MUX_15_MASK, + PORT_x_MUX_15_FUNC_1, PG15); /* TX: G; mux 15; func 1; PG15 */ + serial_early_do_mach_portmux('G', PORT_x_MUX_14_MASK, + PORT_x_MUX_14_FUNC_1, PG14); /* RX: G; mux 14; func 1; PG14 */ + break; + } +#else +# if (P_UART(RX) & P_DEFINED) || (P_UART(TX) & P_DEFINED) +# error "missing portmux logic for UART" +# endif +#endif + SSYNC(); +} + +__attribute__((always_inline)) +static inline uint32_t uart_sclk(void) +{ +#if defined(BFIN_IN_INITCODE) || defined(CONFIG_DEBUG_EARLY_SERIAL) + /* We cannot use get_sclk() early on as it uses caches in + * external memory + */ + return CONFIG_CLKIN_HZ * CONFIG_VCO_MULT / CONFIG_SCLK_DIV / + CONFIG_SCLK0_DIV; +#else + return get_sclk0(); +#endif +} + +__attribute__((always_inline)) +static inline int uart_init(uint32_t uart_base) +{ + /* always enable UART to 8-bit mode */ + bfin_write(&pUART->control, UEN | UMOD_UART | WLS_8); + + SSYNC(); + + return 0; +} + +__attribute__((always_inline)) +static inline int serial_early_init(uint32_t uart_base) +{ + /* handle portmux crap on different Blackfins */ + serial_do_portmux(); + + return uart_init(uart_base); +} + +__attribute__((always_inline)) +static inline int serial_early_uninit(uint32_t uart_base) +{ + /* disable the UART by clearing UEN */ + bfin_write(&pUART->control, 0); + + return 0; +} + +__attribute__((always_inline)) +static inline int serial_early_enabled(uint32_t uart_base) +{ + return bfin_read(&pUART->control) & UEN; +} + +__attribute__((always_inline)) +static inline void serial_early_set_baud(uint32_t uart_base, uint32_t baud) +{ + uint32_t divisor = uart_sclk() / (baud * 16); + + /* Program the divisor to get the baud rate we want */ + bfin_write(&pUART->clock, divisor); + SSYNC(); +} + +__attribute__((always_inline)) +static inline void serial_early_put_div(uint32_t divisor) +{ + uint32_t uart_base = UART_BASE; + bfin_write(&pUART->clock, divisor); +} + +__attribute__((always_inline)) +static inline uint32_t serial_early_get_div(void) +{ + uint32_t uart_base = UART_BASE; + return bfin_read(&pUART->clock); +} + +#endif + +#endif diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S index 90b4d1ae94..7155fc858b 100644 --- a/arch/blackfin/cpu/start.S +++ b/arch/blackfin/cpu/start.S @@ -65,6 +65,7 @@ ENTRY(_start) p5.h = HI(COREMMR_BASE); #ifdef CONFIG_HW_WATCHDOG +#ifndef __ADSPBF60x__ # ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START # define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000 # endif @@ -78,6 +79,7 @@ ENTRY(_start) /* fire up the watchdog - R0.L above needs to be 0x0000 */ W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r0; #endif +#endif /* Turn on the serial for debugging the init process */ serial_early_init diff --git a/arch/blackfin/cpu/u-boot.lds b/arch/blackfin/cpu/u-boot.lds index 58db838fb0..77f48c1a12 100644 --- a/arch/blackfin/cpu/u-boot.lds +++ b/arch/blackfin/cpu/u-boot.lds @@ -114,7 +114,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } >ram_data .text_l1 : diff --git a/arch/blackfin/include/asm/blackfin_cdef.h b/arch/blackfin/include/asm/blackfin_cdef.h index a19f0f74e6..86087117ef 100644 --- a/arch/blackfin/include/asm/blackfin_cdef.h +++ b/arch/blackfin/include/asm/blackfin_cdef.h @@ -84,5 +84,8 @@ #ifdef __ADSPBF561__ # include "mach-bf561/BF561_cdef.h" #endif +#ifdef __ADSPBF609__ +# include "mach-bf609/BF609_cdef.h" +#endif #endif /* __MACH_CDEF_BLACKFIN__ */ diff --git a/arch/blackfin/include/asm/blackfin_def.h b/arch/blackfin/include/asm/blackfin_def.h index f06d1f12cc..c96a3ecbba 100644 --- a/arch/blackfin/include/asm/blackfin_def.h +++ b/arch/blackfin/include/asm/blackfin_def.h @@ -136,5 +136,10 @@ # include "mach-bf561/anomaly.h" # include "mach-bf561/def_local.h" #endif +#ifdef __ADSPBF609__ +# include "mach-bf609/BF609_def.h" +# include "mach-bf609/anomaly.h" +# include "mach-bf609/def_local.h" +#endif #endif /* __MACH_DEF_BLACKFIN__ */ diff --git a/arch/blackfin/include/asm/blackfin_local.h b/arch/blackfin/include/asm/blackfin_local.h index 49d0c9ec3a..fc46ef4d11 100644 --- a/arch/blackfin/include/asm/blackfin_local.h +++ b/arch/blackfin/include/asm/blackfin_local.h @@ -61,6 +61,9 @@ extern u_long get_vco(void); extern u_long get_cclk(void); extern u_long get_sclk(void); +extern u_long get_sclk0(void); +extern u_long get_sclk1(void); +extern u_long get_dclk(void); # define bfin_revid() (bfin_read_CHIPID() >> 28) diff --git a/arch/blackfin/include/asm/config-pre.h b/arch/blackfin/include/asm/config-pre.h index be5687ce6f..d0fd537d88 100644 --- a/arch/blackfin/include/asm/config-pre.h +++ b/arch/blackfin/include/asm/config-pre.h @@ -29,6 +29,8 @@ #define BFIN_BOOT_16HOST_DMA 11 /* boot ldr from 16-bit host dma */ #define BFIN_BOOT_8HOST_DMA 12 /* boot ldr from 8-bit host dma */ #define BFIN_BOOT_NAND 13 /* boot ldr from nand flash */ +#define BFIN_BOOT_RSI_MASTER 14 /* boot ldr from rsi */ +#define BFIN_BOOT_LP_SLAVE 15 /* boot ldr from link port */ #ifndef __ASSEMBLY__ static inline const char *get_bfin_boot_mode(int bfin_boot) @@ -47,6 +49,8 @@ static inline const char *get_bfin_boot_mode(int bfin_boot) case BFIN_BOOT_16HOST_DMA: return "16bit dma"; case BFIN_BOOT_8HOST_DMA: return "8bit dma"; case BFIN_BOOT_NAND: return "nand flash"; + case BFIN_BOOT_RSI_MASTER: return "rsi master"; + case BFIN_BOOT_LP_SLAVE: return "link port slave"; default: return "INVALID"; } } diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h index cc21e93a18..420380dab1 100644 --- a/arch/blackfin/include/asm/cplb.h +++ b/arch/blackfin/include/asm/cplb.h @@ -46,8 +46,13 @@ #define CPLB_IDOCACHE CPLB_INOCACHE | CPLB_L1_CHBL /* Data Attibutes*/ - -#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID) +#if defined(__ADSPBF60x__) +#define SDRAM_IGENERIC (PAGE_SIZE_16MB | CPLB_L1_CHBL | \ + CPLB_USER_RD | CPLB_VALID) +#else +#define SDRAM_IGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | \ + CPLB_USER_RD | CPLB_VALID) +#endif #define SDRAM_IKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) #define L1_IMEMORY (PAGE_SIZE_1MB | CPLB_USER_RD | CPLB_VALID | CPLB_LOCK) #define SDRAM_INON_CHBL (PAGE_SIZE_4MB | CPLB_USER_RD | CPLB_VALID) @@ -59,14 +64,32 @@ #endif #ifdef CONFIG_DCACHE_WB /*Write Back Policy */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#if defined(__ADSPBF60x__) +#define SDRAM_DGENERIC (PAGE_SIZE_16MB | CPLB_L1_CHBL | CPLB_DIRTY | \ + CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | \ + CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#else +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_DIRTY | \ + CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | \ + CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#endif #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158_WORKAROUND) #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_USER_RD | CPLB_USER_WR | CPLB_DIRTY | CPLB_SUPV_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158_WORKAROUND) #define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) #define SDRAM_EBIU (PAGE_SIZE_4MB | CPLB_DIRTY | CPLB_USER_RD | CPLB_USER_WR | CPLB_SUPV_WR | CPLB_VALID | ANOMALY_05000158_WORKAROUND) #else /*Write Through */ -#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158_WORKAROUND) +#if defined(__ADSPBF60x__) +#define SDRAM_DGENERIC (PAGE_SIZE_16MB | CPLB_L1_CHBL | CPLB_WT | \ + CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | \ + CPLB_USER_WR | CPLB_VALID | \ + ANOMALY_05000158_WORKAROUND) +#else +#define SDRAM_DGENERIC (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | \ + CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_RD | \ + CPLB_USER_WR | CPLB_VALID | \ + ANOMALY_05000158_WORKAROUND) +#endif #define SDRAM_DNON_CHBL (PAGE_SIZE_4MB | CPLB_WT | CPLB_L1_AOW | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND) #define SDRAM_DKERNEL (PAGE_SIZE_4MB | CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_USER_RD | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | CPLB_LOCK | ANOMALY_05000158_WORKAROUND) #define L1_DMEMORY (PAGE_SIZE_4MB | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_VALID | ANOMALY_05000158_WORKAROUND) diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index 21ff1cf9fb..ef1db6e99c 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -8,7 +8,12 @@ #ifndef _BLACKFIN_DMA_H_ #define _BLACKFIN_DMA_H_ +#include <linux/types.h> +#ifdef __ADSPBF60x__ +#include <asm/mach-common/bits/dde.h> +#else #include <asm/mach-common/bits/dma.h> +#endif struct dmasg_large { void *next_desc_addr; @@ -30,46 +35,70 @@ struct dmasg { } __attribute__((packed)); struct dma_register { +#ifdef __ADSPBF60x__ + void *next_desc_ptr; /* DMA Next Descriptor Pointer register */ + u32 start_addr; /* DMA Start address register */ + u32 config; /* DMA Configuration register */ + + u32 x_count; /* DMA x_count register */ + s32 x_modify; /* DMA x_modify register */ + u32 y_count; /* DMA y_count register */ + s32 y_modify; /* DMA y_modify register */ + u32 __pad0[2]; + + void *curr_desc_ptr; /* DMA Curr Descriptor Pointer register */ + void *prev_desc_ptr; /* DMA Prev Descriptor Pointer register */ + void *curr_addr; /* DMA Current Address Pointer register */ + u32 status; /* DMA irq status register */ + u32 curr_x_count; /* DMA Current x-count register */ + u32 curr_y_count; /* DMA Current y-count register */ + u32 __pad1[2]; + + u32 bw_limit; /* DMA Bandwidth Limit Count */ + u32 curr_bw_limit; /* DMA curr Bandwidth Limit Count */ + u32 bw_monitor; /* DMA Bandwidth Monitor Count */ + u32 curr_bw_monitor; /* DMA curr Bandwidth Monitor Count */ +#else void *next_desc_ptr; /* DMA Next Descriptor Pointer register */ - unsigned long start_addr; /* DMA Start address register */ + u32 start_addr; /* DMA Start address register */ - unsigned short cfg; /* DMA Configuration register */ - unsigned short dummy1; /* DMA Configuration register */ + u16 config; /* DMA Configuration register */ + u16 dummy1; /* DMA Configuration register */ - unsigned long reserved; + u32 reserved; - unsigned short x_count; /* DMA x_count register */ - unsigned short dummy2; + u16 x_count; /* DMA x_count register */ + u16 dummy2; - short x_modify; /* DMA x_modify register */ - unsigned short dummy3; + s16 x_modify; /* DMA x_modify register */ + u16 dummy3; - unsigned short y_count; /* DMA y_count register */ - unsigned short dummy4; + u16 y_count; /* DMA y_count register */ + u16 dummy4; - short y_modify; /* DMA y_modify register */ - unsigned short dummy5; + s16 y_modify; /* DMA y_modify register */ + u16 dummy5; - void *curr_desc_ptr; /* DMA Current Descriptor Pointer - register */ - unsigned long curr_addr_ptr; /* DMA Current Address Pointer - register */ - unsigned short irq_status; /* DMA irq status register */ - unsigned short dummy6; + void *curr_desc_ptr; /* DMA Current Descriptor Pointer register */ - unsigned short peripheral_map; /* DMA peripheral map register */ - unsigned short dummy7; + u32 curr_addr_ptr; /* DMA Current Address Pointer register */ - unsigned short curr_x_count; /* DMA Current x-count register */ - unsigned short dummy8; + u16 status; /* DMA irq status register */ + u16 dummy6; - unsigned long reserved2; + u16 peripheral_map; /* DMA peripheral map register */ + u16 dummy7; - unsigned short curr_y_count; /* DMA Current y-count register */ - unsigned short dummy9; + u16 curr_x_count; /* DMA Current x-count register */ + u16 dummy8; - unsigned long reserved3; + u32 reserved2; + u16 curr_y_count; /* DMA Current y-count register */ + u16 dummy9; + + u32 reserved3; +#endif }; #endif diff --git a/arch/blackfin/include/asm/global_data.h b/arch/blackfin/include/asm/global_data.h index c2c4d4d41d..44245b4a1b 100644 --- a/arch/blackfin/include/asm/global_data.h +++ b/arch/blackfin/include/asm/global_data.h @@ -32,6 +32,7 @@ /* Architecture-specific global data */ struct arch_global_data { + unsigned long board_type; }; #include <asm-generic/global_data.h> diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 224688fc54..05131b5e8b 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -68,7 +68,7 @@ #ifndef __ASSEMBLY__ -#ifndef CONFIG_BF54x +#if !defined(CONFIG_BF54x) && !defined(CONFIG_BF60x) void set_gpio_dir(unsigned, unsigned short); void set_gpio_inen(unsigned, unsigned short); void set_gpio_polar(unsigned, unsigned short); diff --git a/arch/blackfin/include/asm/mach-bf533/BF531_def.h b/arch/blackfin/include/asm/mach-bf533/BF531_def.h index 3b61aafcc9..2bcd2d88dc 100644 --- a/arch/blackfin/include/asm/mach-bf533/BF531_def.h +++ b/arch/blackfin/include/asm/mach-bf533/BF531_def.h @@ -149,6 +149,7 @@ #define UART_LSR 0xFFC00414 #define UART_SCR 0xFFC0041C #define UART_RBR 0xFFC00400 /* Receive Buffer */ +#define UART0_RBR UART_RBR #define UART_GCTL 0xFFC00424 #define SPT0_TX_CONFIG0 0xFFC00800 #define SPT0_TX_CONFIG1 0xFFC00804 diff --git a/arch/blackfin/include/asm/mach-bf561/BF561_def.h b/arch/blackfin/include/asm/mach-bf561/BF561_def.h index 46925f8c07..a7ff5a3feb 100644 --- a/arch/blackfin/include/asm/mach-bf561/BF561_def.h +++ b/arch/blackfin/include/asm/mach-bf561/BF561_def.h @@ -690,6 +690,7 @@ #define PPI1_FRAME 0xFFC01310 #define UART_THR 0xFFC00400 #define UART_RBR 0xFFC00400 +#define UART0_RBR UART_RBR #define UART_DLL 0xFFC00400 #define UART_DLH 0xFFC00404 #define UART_IER 0xFFC00404 diff --git a/arch/blackfin/include/asm/mach-bf609/BF609_cdef.h b/arch/blackfin/include/asm/mach-bf609/BF609_cdef.h new file mode 100644 index 0000000000..c5900319f2 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/BF609_cdef.h @@ -0,0 +1,192 @@ +/* DO NOT EDIT THIS FILE + * Automatically generated by generate-cdef-headers.xsl + * DO NOT EDIT THIS FILE + */ + +#ifndef __BFIN_CDEF_ADSP_BF609_proc__ +#define __BFIN_CDEF_ADSP_BF609_proc__ + +#include "../mach-common/ADSP-EDN-core_cdef.h" + +#define bfin_read_CGU_STAT() bfin_read32(CGU_STAT) +#define bfin_read_CGU_CLKOUTSEL() bfin_read32(CGU_CLKOUTSEL) +#define bfin_read_CGU_CTL() bfin_read32(CGU_CTL) +#define bfin_write_CGU_CTL(val) bfin_write32(CGU_CTL, val) +#define bfin_read_CGU_DIV() bfin_read32(CGU_DIV) +#define bfin_write_CGU_DIV(val) bfin_write32(CGU_DIV, val) + +#define bfin_read_RCU0_CTL() bfin_read32(RCU0_CTL) +#define bfin_write_RCU0_CTL(val) bfin_write32(RCU0_CTL, val) + +#define bfin_read_CHIPID() bfin_read32(CHIPID) +#define bfin_write_CHIPID(val) bfin_write32(CHIPID, val) + +#define bfin_read_DMC0_CFG() bfin_read32(DMC0_CFG) +#define bfin_write_DMC0_CFG(val) bfin_write32(DMC0_CFG, val) +#define bfin_read_DMC0_TR0() bfin_read32(DMC0_TR0) +#define bfin_write_DMC0_TR0(val) bfin_write32(DMC0_TR0, val) +#define bfin_read_DMC0_TR1() bfin_read32(DMC0_TR1) +#define bfin_write_DMC0_TR1(val) bfin_write32(DMC0_TR1, val) +#define bfin_read_DMC0_TR2() bfin_read32(DMC0_TR2) +#define bfin_write_DMC0_TR2(val) bfin_write32(DMC0_TR2, val) +#define bfin_read_DMC0_MR() bfin_read32(DMC0_MR) +#define bfin_write_DMC0_MR(val) bfin_write32(DMC0_MR, val) +#define bfin_read_DMC0_EMR1() bfin_read32(DMC0_EMR1) +#define bfin_write_DMC0_EMR1(val) bfin_write32(DMC0_EMR1, val) +#define bfin_read_DMC0_CTL() bfin_read32(DMC0_CTL) +#define bfin_write_DMC0_CTL(val) bfin_write32(DMC0_CTL, val) +#define bfin_read_DMC0_STAT() bfin_read32(DMC0_STAT) +#define bfin_write_DMC0_STAT(val) bfin_write32(DMC0_STAT, val) +#define bfin_read_DMC0_DLLCTL() bfin_read32(DMC0_DLLCTL) +#define bfin_write_DMC0_DLLCTL(val) bfin_write32(DMC0_DLLCTL, val) + +#define bfin_read_SEC_CCTL() bfin_read32(SEC0_CCTL0) +#define bfin_write_SEC_CCTL(val) bfin_write32(SEC0_CCTL0, val) +#define bfin_read_SEC_GCTL() bfin_read32(SEC0_GCTL) +#define bfin_write_SEC_GCTL(val) bfin_write32(SEC0_GCTL, val) + +#define bfin_read_SEC_FCTL() bfin_read32(SEC0_FCTL) +#define bfin_write_SEC_FCTL(val) bfin_write32(SEC0_FCTL, val) +#define bfin_read_SEC_SCTL(sid) bfin_read32((SEC0_SCTL0 + (sid) * 8)) +#define bfin_write_SEC_SCTL(sid, val) bfin_write32((SEC0_SCTL0 \ + + (sid) * 8), val) + +#define bfin_read_SMC_GCTL() bfin_read32(SMC_GCTL) +#define bfin_write_SMC_GCTL(val) bfin_write32(SMC_GCTL, val) +#define bfin_read_SMC_GSTAT() bfin_read32(SMC_GSTAT) +#define bfin_read_SMC_B0CTL() bfin_read32(SMC_B0CTL) +#define bfin_write_SMC_B0CTL(val) bfin_write32(SMC_B0CTL, val) +#define bfin_read_SMC_B0TIM() bfin_read32(SMC_B0TIM) +#define bfin_write_SMC_B0TIM(val) bfin_write32(SMC_B0TIM, val) +#define bfin_read_SMC_B0ETIM() bfin_read32(SMC_B0ETIM) +#define bfin_write_SMC_B0ETIM(val) bfin_write32(SMC_B0ETIM, val) +#define bfin_read_SMC_B1CTL() bfin_read32(SMC_B1CTL) +#define bfin_write_SMC_B1CTL(val) bfin_write32(SMC_B1CTL, val) +#define bfin_read_SMC_B1TIM() bfin_read32(SMC_B1TIM) +#define bfin_write_SMC_B1TIM(val) bfin_write32(SMC_B1TIM, val) +#define bfin_read_SMC_B1ETIM() bfin_read32(SMC_B1ETIM) +#define bfin_write_SMC_B1ETIM(val) bfin_write32(SMC_B1ETIM, val) +#define bfin_read_SMC_B2CTL() bfin_read32(SMC_B2CTL) +#define bfin_write_SMC_B2CTL(val) bfin_write32(SMC_B2CTL, val) +#define bfin_read_SMC_B2TIM() bfin_read32(SMC_B2TIM) +#define bfin_write_SMC_B2TIM(val) bfin_write32(SMC_B2TIM, val) +#define bfin_read_SMC_B2ETIM() bfin_read32(SMC_B2ETIM) +#define bfin_write_SMC_B2ETIM(val) bfin_write32(SMC_B2ETIM, val) +#define bfin_read_SMC_B3CTL() bfin_read32(SMC_B3CTL) +#define bfin_write_SMC_B3CTL(val) bfin_write32(SMC_B3CTL, val) +#define bfin_read_SMC_B3TIM() bfin_read32(SMC_B3TIM) +#define bfin_write_SMC_B3TIM(val) bfin_write32(SMC_B3TIM, val) +#define bfin_read_SMC_B3ETIM() bfin_read32(SMC_B3ETIM) +#define bfin_write_SMC_B3ETIM(val) bfin_write32(SMC_B3ETIM, val) + +#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLL_OSC) +#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLL_OSC, val) +#define bfin_write_USB_VBUS_CTL(val) bfin_write8(USB_VBUS_CTL, val) +#define bfin_read_USB_DMA_INTERRUPT() bfin_read8(USB_DMA_IRQ) +#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write8(USB_DMA_IRQ, val) +#define bfin_write_USB_APHY_CNTRL(val) bfin_write8(USB_PHY_CTL, val) +#define bfin_read_USB_APHY_CNTRL() bfin_read8(USB_PHY_CTL) + +#define bfin_read_DMA10_NEXT_DESC_PTR() bfin_readPTR(DMA10_DSCPTR_NXT) +#define bfin_write_DMA10_NEXT_DESC_PTR(val) bfin_writePTR(DMA10_DSCPTR_NXT, val) +#define bfin_read_DMA10_START_ADDR() bfin_readPTR(DMA10_ADDRSTART) +#define bfin_write_DMA10_START_ADDR(val) bfin_writePTR(DMA10_ADDRSTART, val) +#define bfin_read_DMA10_CONFIG() bfin_read32(DMA10_CFG) +#define bfin_write_DMA10_CONFIG(val) bfin_write32(DMA10_CFG, val) +#define bfin_read_DMA10_X_COUNT() bfin_read32(DMA10_XCNT) +#define bfin_write_DMA10_X_COUNT(val) bfin_write32(DMA10_XCNT, val) +#define bfin_read_DMA10_X_MODIFY() bfin_read32(DMA10_XMOD) +#define bfin_write_DMA10_X_MODIFY(val) bfin_write32(DMA10_XMOD, val) +#define bfin_read_DMA10_Y_COUNT() bfin_read32(DMA10_YCNT) +#define bfin_write_DMA10_Y_COUNT(val) bfin_write32(DMA10_YCNT, val) +#define bfin_read_DMA10_Y_MODIFY() bfin_read32(DMA10_YMOD) +#define bfin_write_DMA10_Y_MODIFY(val) bfin_write32(DMA10_YMOD, val) +#define bfin_read_DMA10_CURR_DESC_PTR() bfin_readPTR(DMA10_DSCPTR_CUR) +#define bfin_write_DMA10_CURR_DESC_PTR(val) bfin_writePTR(DMA10_DSCPTR_CUR, val) +#define bfin_read_DMA10_CURR_ADDR() bfin_readPTR(DMA10_ADDR_CUR) +#define bfin_write_DMA10_CURR_ADDR(val) bfin_writePTR(DMA10_ADDR_CUR, val) +#define bfin_read_DMA10_IRQ_STATUS() bfin_read32(DMA10_STAT) +#define bfin_write_DMA10_IRQ_STATUS(val) bfin_write32(DMA10_STAT, val) +#define bfin_read_DMA10_CURR_X_COUNT() bfin_read32(DMA10_XCNT_CUR) +#define bfin_write_DMA10_CURR_X_COUNT(val) bfin_write32(DMA10_XCNT_CUR, val) +#define bfin_read_DMA10_CURR_Y_COUNT() bfin_read32(DMA10_YCNT_CUR) +#define bfin_write_DMA10_CURR_Y_COUNT(val) bfin_write32(DMA10_YCNT_CUR, val) + +#define bfin_read_WDOG_CNT() bfin_read32(WDOG_CNT) +#define bfin_write_WDOG_CNT(val) bfin_write32(WDOG_CNT, val) +#define bfin_read_WDOG_CTL() bfin_read32(WDOG_CTL) +#define bfin_write_WDOG_CTL(val) bfin_write32(WDOG_CTL, val) +#define bfin_read_WDOG_STAT() bfin_read32(WDOG_STAT) +#define bfin_write_WDOG_STAT(val) bfin_write32(WDOG_STAT, val) +#define bfin_read_SPI_BAUD() bfin_read32(SPI0_CLK) +#define bfin_write_SPI_BAUD(val) bfin_write32(SPI0_CLK, val) + +#define bfin_read_PORTD_FER() bfin_read32(PORTD_FER) +#define bfin_write_PORTD_FER_SET(val) bfin_write32(PORTD_FER_SET, val) +#define bfin_write_PORTD_FER_CLR(val) bfin_write32(PORTD_FER_CLR, val) +#define bfin_read_PORTD_MUX() bfin_read32(PORTD_MUX) +#define bfin_write_PORTD_MUX(val) bfin_write32(PORTD_MUX, val) +#define bfin_read_PORTG_FER() bfin_read32(PORTG_FER) +#define bfin_write_PORTG_FER_SET(val) bfin_write32(PORTG_FER_SET, val) +#define bfin_write_PORTG_FER_CLR(val) bfin_write32(PORTG_FER_CLR, val) +#define bfin_read_PORTG_MUX() bfin_read32(PORTG_MUX) +#define bfin_write_PORTG_MUX(val) bfin_write32(PORTG_MUX, val) + +#define bfin_read_RSI_CLK_CONTROL() bfin_read16(RSI_CLK_CONTROL) +#define bfin_write_RSI_CLK_CONTROL(val) bfin_write16(RSI_CLK_CONTROL, val) +#define bfin_read_RSI_ARGUMENT() bfin_read32(RSI_ARGUMENT) +#define bfin_write_RSI_ARGUMENT(val) bfin_write32(RSI_ARGUMENT, val) +#define bfin_read_RSI_COMMAND() bfin_read16(RSI_COMMAND) +#define bfin_write_RSI_COMMAND(val) bfin_write16(RSI_COMMAND, val) +#define bfin_read_RSI_RESP_CMD() bfin_read16(RSI_RESP_CMD) +#define bfin_write_RSI_RESP_CMD(val) bfin_write16(RSI_RESP_CMD, val) +#define bfin_read_RSI_RESPONSE0() bfin_read32(RSI_RESPONSE0) +#define bfin_write_RSI_RESPONSE0(val) bfin_write32(RSI_RESPONSE0, val) +#define bfin_read_RSI_RESPONSE1() bfin_read32(RSI_RESPONSE1) +#define bfin_write_RSI_RESPONSE1(val) bfin_write32(RSI_RESPONSE1, val) +#define bfin_read_RSI_RESPONSE2() bfin_read32(RSI_RESPONSE2) +#define bfin_write_RSI_RESPONSE2(val) bfin_write32(RSI_RESPONSE2, val) +#define bfin_read_RSI_RESPONSE3() bfin_read32(RSI_RESPONSE3) +#define bfin_write_RSI_RESPONSE3(val) bfin_write32(RSI_RESPONSE3, val) +#define bfin_read_RSI_DATA_TIMER() bfin_read32(RSI_DATA_TIMER) +#define bfin_write_RSI_DATA_TIMER(val) bfin_write32(RSI_DATA_TIMER, val) +#define bfin_read_RSI_DATA_LGTH() bfin_read16(RSI_DATA_LGTH) +#define bfin_write_RSI_DATA_LGTH(val) bfin_write16(RSI_DATA_LGTH, val) +#define bfin_read_RSI_DATA_CONTROL() bfin_read16(RSI_DATA_CONTROL) +#define bfin_write_RSI_DATA_CONTROL(val) bfin_write16(RSI_DATA_CONTROL, val) +#define bfin_read_RSI_DATA_CNT() bfin_read16(RSI_DATA_CNT) +#define bfin_write_RSI_DATA_CNT(val) bfin_write16(RSI_DATA_CNT, val) +#define bfin_read_RSI_STATUS() bfin_read32(RSI_STATUS) +#define bfin_write_RSI_STATUS(val) bfin_write32(RSI_STATUS, val) +#define bfin_read_RSI_STATUSCL() bfin_read16(RSI_STATUSCL) +#define bfin_write_RSI_STATUSCL(val) bfin_write16(RSI_STATUSCL, val) +#define bfin_read_RSI_MASK0() bfin_read32(RSI_MASK0) +#define bfin_write_RSI_MASK0(val) bfin_write32(RSI_MASK0, val) +#define bfin_read_RSI_MASK1() bfin_read32(RSI_MASK1) +#define bfin_write_RSI_MASK1(val) bfin_write32(RSI_MASK1, val) +#define bfin_read_RSI_FIFO_CNT() bfin_read16(RSI_FIFO_CNT) +#define bfin_write_RSI_FIFO_CNT(val) bfin_write16(RSI_FIFO_CNT, val) +#define bfin_read_RSI_CEATA_CONTROL() bfin_read16(RSI_CEATA_CONTROL) +#define bfin_write_RSI_CEATA_CONTROL(val) bfin_write16(RSI_CEATA_CONTROL, val) +#define bfin_read_RSI_BLKSZ() bfin_read16(RSI_BLKSZ) +#define bfin_write_RSI_BLKSZ(val) bfin_write16(RSI_BLKSZ, val) +#define bfin_read_RSI_FIFO() bfin_read32(RSI_FIFO) +#define bfin_write_RSI_FIFO(val) bfin_write32(RSI_FIFO, val) +#define bfin_read_RSI_ESTAT() bfin_read32(RSI_ESTAT) +#define bfin_write_RSI_ESTAT(val) bfin_write32(RSI_ESTAT, val) +#define bfin_read_RSI_EMASK() bfin_read32(RSI_EMASK) +#define bfin_write_RSI_EMASK(val) bfin_write32(RSI_EMASK, val) +#define bfin_read_RSI_CONFIG() bfin_read16(RSI_CONFIG) +#define bfin_write_RSI_CONFIG(val) bfin_write16(RSI_CONFIG, val) +#define bfin_read_RSI_RD_WAIT_EN() bfin_read16(RSI_RD_WAIT_EN) +#define bfin_write_RSI_RD_WAIT_EN(val) bfin_write16(RSI_RD_WAIT_EN, val) +#define bfin_read_RSI_PID0() bfin_read16(RSI_PID0) +#define bfin_write_RSI_PID0(val) bfin_write16(RSI_PID0, val) +#define bfin_read_RSI_PID1() bfin_read16(RSI_PID1) +#define bfin_write_RSI_PID1(val) bfin_write16(RSI_PID1, val) +#define bfin_read_RSI_PID2() bfin_read16(RSI_PID2) +#define bfin_write_RSI_PID2(val) bfin_write16(RSI_PID2, val) +#define bfin_read_RSI_PID3() bfin_read16(RSI_PID3) +#define bfin_write_RSI_PID3(val) bfin_write16(RSI_PID3, val) + +#endif /* __BFIN_CDEF_ADSP_BF609_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf609/BF609_def.h b/arch/blackfin/include/asm/mach-bf609/BF609_def.h new file mode 100644 index 0000000000..8c1dcd006e --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/BF609_def.h @@ -0,0 +1,247 @@ +/* DO NOT EDIT THIS FILE + * Automatically generated by generate-def-headers.xsl + * DO NOT EDIT THIS FILE + */ + +#ifndef __BFIN_DEF_ADSP_BF609_proc__ +#define __BFIN_DEF_ADSP_BF609_proc__ + +#include "../mach-common/ADSP-EDN-core_def.h" + +#define RSI_CLK_CONTROL 0xFFC00604 /* RSI0 Clock Control Register */ +#define RSI_ARGUMENT 0xFFC00608 /* RSI0 Argument Register */ +#define RSI_COMMAND 0xFFC0060C /* RSI0 Command Register */ +#define RSI_RESP_CMD 0xFFC00610 /* RSI0 Response Command Register */ +#define RSI_RESPONSE0 0xFFC00614 /* RSI0 Response 0 Register */ +#define RSI_RESPONSE1 0xFFC00618 /* RSI0 Response 1 Register */ +#define RSI_RESPONSE2 0xFFC0061C /* RSI0 Response 2 Register */ +#define RSI_RESPONSE3 0xFFC00620 /* RSI0 Response 3 Register */ +#define RSI_DATA_TIMER 0xFFC00624 /* RSI0 Data Timer Register */ +#define RSI_DATA_LGTH 0xFFC00628 /* RSI0 Data Length Register */ +#define RSI_DATA_CONTROL 0xFFC0062C /* RSI0 Data Control Register */ +#define RSI_DATA_CNT 0xFFC00630 /* RSI0 Data Count Register */ +#define RSI_STATUS 0xFFC00634 /* RSI0 Status Register */ +#define RSI_STATUSCL 0xFFC00638 /* RSI0 Status Clear Register */ +#define RSI_IMSK0 0xFFC0063C /* RSI0 Interrupt 0 Mask Register */ +#define RSI_IMSK1 0xFFC00640 /* RSI0 Interrupt 1 Mask Register */ +#define RSI_FIFO_CNT 0xFFC00648 /* RSI0 FIFO Counter Register */ +#define RSI_CEATA_CONTROL 0xFFC0064C /* RSI0 contains bit to dis CCS gen */ +#define RSI_BOOT_TCNTR 0xFFC00650 /* RSI0 Boot Timing Counter Register */ +#define RSI_BACK_TOUT 0xFFC00654 /* RSI0 Boot Ack Timeout Register */ +#define RSI_SLP_WKUP_TOUT 0xFFC00658 /* RSI0 Sleep Wakeup Timeout Register */ +#define RSI_BLKSZ 0xFFC0065C /* RSI0 Block Size Register */ +#define RSI_FIFO 0xFFC00680 /* RSI0 Data FIFO Register */ +#define RSI_ESTAT 0xFFC006C0 /* RSI0 Exception Status Register */ +#define RSI_EMASK 0xFFC006C4 /* RSI0 Exception Mask Register */ +#define RSI_CONFIG 0xFFC006C8 /* RSI0 Configuration Register */ +#define RSI_RD_WAIT_EN 0xFFC006CC /* RSI0 Read Wait Enable Register */ +#define RSI_PID0 0xFFC006D0 /* RSI0 Peripheral Id Register */ +#define RSI_PID1 0xFFC006D4 /* RSI0 Peripheral Id Register */ +#define RSI_PID2 0xFFC006D8 /* RSI0 Peripheral Id Register */ +#define RSI_PID3 0xFFC006DC /* RSI0 Peripheral Id Register */ + +#define TWI0_CLKDIV 0xFFC01E00 /* TWI0 SCL Clock Divider */ +#define TWI1_CLKDIV 0xFFC01F00 /* TWI1 SCL Clock Divider */ + +#define UART0_REVID 0xFFC02000 /* UART0 Revision ID Register */ +#define UART0_CTL 0xFFC02004 /* UART0 Control Register */ +#define UART0_STAT 0xFFC02008 /* UART0 Status Register */ +#define UART0_SCR 0xFFC0200C /* UART0 Scratch Register */ +#define UART0_CLK 0xFFC02010 /* UART0 Clock Rate Register */ +#define UART0_IMSK 0xFFC02014 /* UART0 Interrupt Mask Register */ +#define UART0_IMSK_SET 0xFFC02018 /* UART0 Interrupt Mask Set Register */ +#define UART0_IMSK_CLR 0xFFC0201C /* UART0 Interrupt Mask Clear Register */ +#define UART0_RBR 0xFFC02020 /* UART0 Receive Buffer Register */ +#define UART0_THR 0xFFC02024 /* UART0 Transmit Hold Register */ +#define UART0_TAIP 0xFFC02028 /* UART0 TX Address/Insert Pulse Reg */ +#define UART0_TSR 0xFFC0202C /* UART0 Transmit Shift Register */ +#define UART0_RSR 0xFFC02030 /* UART0 Receive Shift Register */ +#define UART0_TXCNT 0xFFC02034 /* UART0 Transmit Counter Register */ +#define UART0_RXCNT 0xFFC02038 /* UART0 Receive Counter Register */ +#define UART1_REVID 0xFFC02400 /* UART1 Revision ID Register */ +#define UART1_CTL 0xFFC02404 /* UART1 Control Register */ +#define UART1_STAT 0xFFC02408 /* UART1 Status Register */ +#define UART1_SCR 0xFFC0240C /* UART1 Scratch Register */ +#define UART1_CLK 0xFFC02410 /* UART1 Clock Rate Register */ +#define UART1_IMSK 0xFFC02414 /* UART1 Interrupt Mask Register */ +#define UART1_IMSK_SET 0xFFC02418 /* UART1 Interrupt Mask Set Register */ +#define UART1_IMSK_CLR 0xFFC0241C /* UART1 Interrupt Mask Clear Register */ +#define UART1_RBR 0xFFC02420 /* UART1 Receive Buffer Register */ +#define UART1_THR 0xFFC02424 /* UART1 Transmit Hold Register */ +#define UART1_TAIP 0xFFC02428 /* UART1 TX Address/Insert Pulse Reg */ +#define UART1_TSR 0xFFC0242C /* UART1 Transmit Shift Register */ +#define UART1_RSR 0xFFC02430 /* UART1 Receive Shift Register */ +#define UART1_TXCNT 0xFFC02434 /* UART1 Transmit Counter Register */ +#define UART1_RXCNT 0xFFC02438 /* UART1 Receive Counter Register */ + +#define PORTA_FER 0xFFC03000 /* PORTA Port x Function Enable */ +#define PORTA_FER_SET 0xFFC03004 /* PORTA Port x Function Enable Set */ +#define PORTA_FER_CLR 0xFFC03008 /* PORTA Port x Function Enable Clear */ +#define PORTA_MUX 0xFFC03030 /* PORTA Port x Multiplexer Control */ +#define PORTB_FER 0xFFC03080 /* PORTB Port x Function Enable */ +#define PORTB_FER_SET 0xFFC03084 /* PORTB Port x Function Enable Set */ +#define PORTB_FER_CLR 0xFFC03088 /* PORTB Port x Function Enable Clear */ +#define PORTB_MUX 0xFFC030B0 /* PORTB Port x Multiplexer Control */ +#define PORTC_FER 0xFFC03100 /* PORTC Port x Function Enable */ +#define PORTC_FER_SET 0xFFC03104 /* PORTC Port x Function Enable Set */ +#define PORTC_FER_CLR 0xFFC03108 /* PORTC Port x Function Enable Clear */ +#define PORTC_MUX 0xFFC03130 /* PORTC Port x Multiplexer Control */ +#define PORTD_FER 0xFFC03180 /* PORTD Port x Function Enable */ +#define PORTD_FER_SET 0xFFC03184 /* PORTD Port x Function Enable Set */ +#define PORTD_FER_CLR 0xFFC03188 /* PORTD Port x Function Enable Clear */ +#define PORTD_MUX 0xFFC031B0 /* PORTD Port x Multiplexer Control */ +#define PORTE_FER 0xFFC03200 /* PORTE Port x Function Enable */ +#define PORTE_FER_SET 0xFFC03204 /* PORTE Port x Function Enable Set */ +#define PORTE_FER_CLR 0xFFC03208 /* PORTE Port x Function Enable Clear */ +#define PORTE_MUX 0xFFC03230 /* PORTE Port x Multiplexer Control */ +#define PORTF_FER 0xFFC03280 /* PORTF Port x Function Enable */ +#define PORTF_FER_SET 0xFFC03284 /* PORTF Port x Function Enable Set */ +#define PORTF_FER_CLR 0xFFC03288 /* PORTF Port x Function Enable Clear */ +#define PORTF_MUX 0xFFC032B0 /* PORTF Port x Multiplexer Control */ +#define PORTG_FER 0xFFC03300 /* PORTG Port x Function Enable */ +#define PORTG_FER_SET 0xFFC03304 /* PORTG Port x Function Enable Set */ +#define PORTG_FER_CLR 0xFFC03308 /* PORTG Port x Function Enable Clear */ +#define PORTG_MUX 0xFFC03330 /* PORTG Port x Multiplexer Control */ + +#define SMC_GCTL 0xFFC16004 /* SMC Control Register */ +#define SMC_GSTAT 0xFFC16008 /* SMC Status Register */ +#define SMC_B0CTL 0xFFC1600C /* SMC Bank0 Control Register */ +#define SMC_B0TIM 0xFFC16010 /* SMC Bank0 Timing Register */ +#define SMC_B0ETIM 0xFFC16014 /* SMC Bank0 Extended Timing Register */ +#define SMC_B1CTL 0xFFC1601C /* SMC BANK1 Control Register */ +#define SMC_B1TIM 0xFFC16020 /* SMC BANK1 Timing Register */ +#define SMC_B1ETIM 0xFFC16024 /* SMC BANK1 Extended Timing Register */ +#define SMC_B2CTL 0xFFC1602C /* SMC BANK2 Control Register */ +#define SMC_B2TIM 0xFFC16030 /* SMC BANK2 Timing Register */ +#define SMC_B2ETIM 0xFFC16034 /* SMC BANK2 Extended Timing Register */ +#define SMC_B3CTL 0xFFC1603C /* SMC BANK3 Control Register */ +#define SMC_B3TIM 0xFFC16040 /* SMC BANK3 Timing Register */ +#define SMC_B3ETIM 0xFFC16044 /* SMC BANK3 Extended Timing Register */ + +#define WDOG_CTL 0xFFC17000 /* WDOG0 Control Register */ +#define WDOG_CNT 0xFFC17004 /* WDOG0 Count Register */ +#define WDOG_STAT 0xFFC17008 /* WDOG0 Watchdog Timer Status Register */ +#define WDOG1_CTL 0xFFC17800 /* WDOG1 Control Register */ +#define WDOG1_CNT 0xFFC17804 /* WDOG1 Count Register */ +#define WDOG1_STAT 0xFFC17808 /* WDOG1 Watchdog Timer Status Register */ + +#define EMAC0_MACCFG 0xFFC20000 /* EMAC0 MAC Configuration Register */ +#define EMAC1_MACCFG 0xFFC22000 /* EMAC1 MAC Configuration Register */ + +#define DMA10_DSCPTR_NXT 0xFFC05000 /* DMA10 Pointer to Next Initial Desc */ +#define DMA10_ADDRSTART 0xFFC05004 /* DMA10 Start Address of Current Buf */ +#define DMA10_CFG 0xFFC05008 /* DMA10 Configuration Register */ +#define DMA10_XCNT 0xFFC0500C /* DMA10 Inner Loop Count Start Value */ +#define DMA10_XMOD 0xFFC05010 /* DMA10 Inner Loop Address Increment */ +#define DMA10_YCNT 0xFFC05014 /* DMA10 Outer Loop Count Start Value */ +#define DMA10_YMOD 0xFFC05018 /* DMA10 Outer Loop Address Increment */ +#define DMA10_DSCPTR_CUR 0xFFC05024 /* DMA10 Current Descriptor Pointer */ +#define DMA10_DSCPTR_PRV 0xFFC05028 /* DMA10 Previous Initial Desc Pointer */ +#define DMA10_ADDR_CUR 0xFFC0502C /* DMA10 Current Address */ +#define DMA10_STAT 0xFFC05030 /* DMA10 Status Register */ +#define DMA10_XCNT_CUR 0xFFC05034 /* DMA10 Curr Count(1D) or intra-row(2D)*/ +#define DMA10_YCNT_CUR 0xFFC05038 /* DMA10 Curr Row Count (2D only) */ +#define DMA10_BWLCNT 0xFFC05040 /* DMA10 Bandwidth Limit Count */ +#define DMA10_BWLCNT_CUR 0xFFC05044 /* DMA10 Bandwidth Limit Count Current */ +#define DMA10_BWMCNT 0xFFC05048 /* DMA10 Bandwidth Monitor Count */ +#define DMA10_BWMCNT_CUR 0xFFC0504C /* DMA10 Bandwidth Monitor Count Current*/ + +#define MDMA_S0_NEXT_DESC_PTR DMA21_DSCPTR_NXT +#define DMA21_DSCPTR_NXT 0xFFC09000 /* DMA21 Pointer to Next Initial Desc */ +#define MDMA_D0_NEXT_DESC_PTR DMA22_DSCPTR_NXT +#define DMA22_DSCPTR_NXT 0xFFC09080 /* DMA22 Pointer to Next Initial Desc */ + +#define DMC0_ID 0xFFC80000 /* DMC0 Identification Register */ +#define DMC0_CTL 0xFFC80004 /* DMC0 Control Register */ +#define DMC0_STAT 0xFFC80008 /* DMC0 Status Register */ +#define DMC0_EFFCTL 0xFFC8000C /* DMC0 Efficiency Controller */ +#define DMC0_PRIO 0xFFC80010 /* DMC0 Priority ID Register */ +#define DMC0_PRIOMSK 0xFFC80014 /* DMC0 Priority ID Mask */ +#define DMC0_CFG 0xFFC80040 /* DMC0 SDRAM Configuration */ +#define DMC0_TR0 0xFFC80044 /* DMC0 Timing Register 0 */ +#define DMC0_TR1 0xFFC80048 /* DMC0 Timing Register 1 */ +#define DMC0_TR2 0xFFC8004C /* DMC0 Timing Register 2 */ +#define DMC0_MSK 0xFFC8005C /* DMC0 Mode Register Mask */ +#define DMC0_MR 0xFFC80060 /* DMC0 Mode Shadow register */ +#define DMC0_EMR1 0xFFC80064 /* DMC0 EMR1 Shadow Register */ +#define DMC0_EMR2 0xFFC80068 /* DMC0 EMR2 Shadow Register */ +#define DMC0_EMR3 0xFFC8006C /* DMC0 EMR3 Shadow Register */ +#define DMC0_DLLCTL 0xFFC80080 /* DMC0 DLL Control Register */ +#define DMC0_PADCTL 0xFFC800C0 /* DMC0 PAD Control Register 0 */ + +#define SEC0_CCTL0 0xFFCA4400 /* SEC0 Core Control Register n */ +#define SEC0_CCTL1 0xFFCA4440 /* SEC0 Core Control Register n */ +#define SEC0_FCTL 0xFFCA4010 /* SEC0 Fault Control Register */ +#define SEC0_GCTL 0xFFCA4000 /* SEC0 Global Control Register */ +#define SEC0_SCTL0 0xFFCA4800 /* SEC0 IRQ Source Control Register n */ + +#define RCU0_CTL 0xFFCA6000 /* RCU0 Control Register */ +#define RCU0_STAT 0xFFCA6004 /* RCU0 Status Register */ +#define RCU0_CRCTL 0xFFCA6008 /* RCU0 Core Reset Control Register */ +#define RCU0_CRSTAT 0xFFCA600C /* RCU0 Core Reset Status Register */ +#define RCU0_SIDIS 0xFFCA6010 /* RCU0 Sys Interface Disable Register */ +#define RCU0_SISTAT 0xFFCA6014 /* RCU0 Sys Interface Status Register */ +#define RCU0_SVECT_LCK 0xFFCA6018 /* RCU0 SVECT Lock Register */ +#define RCU0_BCODE 0xFFCA601C /* RCU0 Boot Code Register */ +#define RCU0_SVECT0 0xFFCA6020 /* RCU0 Software Vector Register n */ +#define RCU0_SVECT1 0xFFCA6024 /* RCU0 Software Vector Register n */ + +#define CGU_CTL 0xFFCA8000 /* CGU0 Control Register */ +#define CGU_STAT 0xFFCA8004 /* CGU0 Status Register */ +#define CGU_DIV 0xFFCA8008 /* CGU0 Divisor Register */ +#define CGU_CLKOUTSEL 0xFFCA800C /* CGU0 CLKOUT Select Register */ + +#define DPM0_CTL 0xFFCA9000 /* DPM0 Control Register */ +#define DPM0_STAT 0xFFCA9004 /* DPM0 Status Register */ +#define DPM0_CCBF_DIS 0xFFCA9008 /* DPM0 Core Clock Buffer Disable */ +#define DPM0_CCBF_EN 0xFFCA900C /* DPM0 Core Clock Buffer Enable */ +#define DPM0_CCBF_STAT 0xFFCA9010 /* DPM0 Core Clock Buffer Status */ +#define DPM0_CCBF_STAT_STKY 0xFFCA9014 /* DPM0 Core Clock Buffer Stat Sticky */ +#define DPM0_SCBF_DIS 0xFFCA9018 /* DPM0 System Clock Buffer Disable */ +#define DPM0_WAKE_EN 0xFFCA901C /* DPM0 Wakeup Enable Register */ +#define DPM0_WAKE_POL 0xFFCA9020 /* DPM0 Wakeup Polarity Register */ +#define DPM0_WAKE_STAT 0xFFCA9024 /* DPM0 Wakeup Status Register */ +#define DPM0_HIB_DIS 0xFFCA9028 /* DPM0 Hibernate Disable Register */ +#define DPM0_PGCNTR 0xFFCA902C /* DPM0 Power Good Counter Register */ +#define DPM0_RESTORE0 0xFFCA9030 /* DPM0 Restore Register */ +#define DPM0_RESTORE1 0xFFCA9034 /* DPM0 Restore Register */ +#define DPM0_RESTORE2 0xFFCA9038 /* DPM0 Restore Register */ +#define DPM0_RESTORE3 0xFFCA903C /* DPM0 Restore Register */ +#define DPM0_RESTORE4 0xFFCA9040 /* DPM0 Restore Register */ +#define DPM0_RESTORE5 0xFFCA9044 /* DPM0 Restore Register */ +#define DPM0_RESTORE6 0xFFCA9048 /* DPM0 Restore Register */ +#define DPM0_RESTORE7 0xFFCA904C /* DPM0 Restore Register */ +#define DPM0_RESTORE8 0xFFCA9050 /* DPM0 Restore Register */ +#define DPM0_RESTORE9 0xFFCA9054 /* DPM0 Restore Register */ +#define DPM0_RESTORE10 0xFFCA9058 /* DPM0 Restore Register */ +#define DPM0_RESTORE11 0xFFCA905C /* DPM0 Restore Register */ +#define DPM0_RESTORE12 0xFFCA9060 /* DPM0 Restore Register */ +#define DPM0_RESTORE13 0xFFCA9064 /* DPM0 Restore Register */ +#define DPM0_RESTORE14 0xFFCA9068 /* DPM0 Restore Register */ +#define DPM0_RESTORE15 0xFFCA906C /* DPM0 Restore Register */ + +#define USB_FADDR 0xFFCC1000 /* USB Device Address in Peripheral Mode*/ +#define USB_DMA_IRQ 0xFFCC1200 /* USB Interrupt Register */ +#define USB_VBUS_CTL 0xFFCC1380 /* USB VBus Control */ +#define USB_PHY_CTL 0xFFCC1394 /* USB PHY Control */ +#define USB_PLL_OSC 0xFFCC1398 /* USB PLL and Oscillator Control */ + + +#define CHIPID 0xffc00014 +/* CHIPID Masks */ +#define CHIPID_VERSION 0xF0000000 +#define CHIPID_FAMILY 0x0FFFF000 +#define CHIPID_MANUFACTURE 0x00000FFE + +#define L1_DATA_A_SRAM 0xFF800000 /* 0xFF800000->0xFF803FFF Data Bank A SRAM */ +#define L1_DATA_A_SRAM_SIZE 0x8000 +#define L1_DATA_A_SRAM_END (L1_DATA_A_SRAM + L1_DATA_A_SRAM_SIZE) +#define L1_DATA_B_SRAM 0xFF900000 /* 0xFF900000->0xFF903FFF Data Bank B SRAM */ +#define L1_DATA_B_SRAM_SIZE 0x4000 +#define L1_DATA_B_SRAM_END (L1_DATA_B_SRAM + L1_DATA_B_SRAM_SIZE) + +#define L1_INST_SRAM 0xFFA00000 /* 0xFFA00000->0xFFA07FFF Inst Bank A SRAM */ +#define L1_INST_SRAM_SIZE 0x8000 +#define L1_INST_SRAM_END (L1_INST_SRAM + L1_INST_SRAM_SIZE) + +#endif /* __BFIN_DEF_ADSP_BF609_proc__ */ diff --git a/arch/blackfin/include/asm/mach-bf609/anomaly.h b/arch/blackfin/include/asm/mach-bf609/anomaly.h new file mode 100644 index 0000000000..0a70f082af --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/anomaly.h @@ -0,0 +1,97 @@ +/* + * Copyright 2004-2012 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd + */ + +/* This file should be up to date with: + * - Revision A, 15/06/2012; ADSP-BF609 Blackfin Processor Anomaly List + */ + +#if __SILICON_REVISION__ < 0 +# error will not work on BF609 silicon version +#endif + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* TRU_STAT.ADDRERR and TRU_ERRADDR.ADDR May Not Reflect the Correct Status */ +#define ANOMALY_16000003 (1) +/* The EPPI Data Enable (DEN) Signal is Not Functional */ +#define ANOMALY_16000004 (1) +/* Using L1 Instruction Cache with Parity Enabled is Unreliable */ +#define ANOMALY_16000005 (1) +/* SEQSTAT.SYSNMI Clears Upon Entering the NMI ISR */ +#define ANOMALY_16000006 (1) +/* DDR2 Memory Reads May Fail Intermittently */ +#define ANOMALY_16000007 (1) +/* Instruction Memory Stalls Can Cause IFLUSH to Fail */ +#define ANOMALY_16000008 (1) +/* TestSET Instruction Cannot Be Interrupted */ +#define ANOMALY_16000009 (1) +/* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ +#define ANOMALY_16000010 (1) +/* False Hardware Error when RETI Points to Invalid Memory */ +#define ANOMALY_16000011 (1) +/* Speculative Fetches of Indirect-Pointer Inst Can Cause False Hw Errors */ +#define ANOMALY_16000012 (1) +/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */ +#define ANOMALY_16000013 (1) +/* False Hardware Error from an Access in the Shadow of a Conditional Branch */ +#define ANOMALY_16000014 (1) +/* Multi-Issue Inst with dsp32shiftimm in slot1 and P in slot2 Not Supported */ +#define ANOMALY_16000015 (1) +/* Speculative Fetches Can Cause Undesired External FIFO Operations */ +#define ANOMALY_16000017 (1) +/* RSI Boot Cleanup Routine Does Not Clear Registers */ +#define ANOMALY_16000018 (1) +/* SPI Master Boot Device Auto-detection Frequency is Set Incorrectly */ +#define ANOMALY_16000019 (1) +/* rom_SysControl() Fails to Set DDR0_CTL.INIT for Wakeup From Hibernate */ +#define ANOMALY_16000020 (1) +/* rom_SysControl() Fails to Save and Restore DDR0_PHYCTL3 for Hb/Wk Sequence */ +#define ANOMALY_16000021 (1) +/* Boot Code Fails to Enable Parity Fault Detection */ +#define ANOMALY_16000022 (1) +/* USB DMA interrupt status do not show the DMA channel intr in the DMA ISR */ +#define ANOMALY_16000027 (1) +/* Interrupted Core Reads of MMRs May Cause Data Loss */ +#define ANOMALY_16000030 (1) + +/* Anomalies that don't exist on this proc */ +#define ANOMALY_05000158 (0) +#define ANOMALY_05000189 (0) +#define ANOMALY_05000198 (0) +#define ANOMALY_05000219 (0) +#define ANOMALY_05000230 (0) +#define ANOMALY_05000231 (0) +#define ANOMALY_05000244 (0) +#define ANOMALY_05000261 (0) +#define ANOMALY_05000263 (0) +#define ANOMALY_05000273 (0) +#define ANOMALY_05000274 (0) +#define ANOMALY_05000278 (0) +#define ANOMALY_05000281 (0) +#define ANOMALY_05000287 (0) +#define ANOMALY_05000311 (0) +#define ANOMALY_05000312 (0) +#define ANOMALY_05000323 (0) +#define ANOMALY_05000353 (1) +#define ANOMALY_05000363 (0) +#define ANOMALY_05000386 (0) +#define ANOMALY_05000480 (0) +#define ANOMALY_05000481 (1) + +/* Reuse BF5xx anomalies IDs for the same anomaly in BF60x */ +#define ANOMALY_05000491 ANOMALY_16000008 +#define ANOMALY_05000477 ANOMALY_16000009 +#define ANOMALY_05000443 ANOMALY_16000010 +#define ANOMALY_05000461 ANOMALY_16000011 +#define ANOMALY_05000426 ANOMALY_16000012 +#define ANOMALY_05000310 ANOMALY_16000013 +#define ANOMALY_05000245 ANOMALY_16000014 +#define ANOMALY_05000074 ANOMALY_16000015 +#define ANOMALY_05000416 ANOMALY_16000017 + + +#endif diff --git a/arch/blackfin/include/asm/mach-bf609/def_local.h b/arch/blackfin/include/asm/mach-bf609/def_local.h new file mode 100644 index 0000000000..d4250e6f99 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/def_local.h @@ -0,0 +1,5 @@ +#include "gpio.h" +#include "portmux.h" +#include "ports.h" + +#define CONFIG_BF60x 1 /* Linux glue */ diff --git a/arch/blackfin/include/asm/mach-bf609/gpio.h b/arch/blackfin/include/asm/mach-bf609/gpio.h new file mode 100644 index 0000000000..e297bcc833 --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/gpio.h @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2008 Analog Devices Inc. + * Licensed under the GPL-2 or later. + */ + +#ifndef _MACH_GPIO_H_ +#define _MACH_GPIO_H_ + +#define MAX_BLACKFIN_GPIOS 112 + +#define GPIO_PA0 0 +#define GPIO_PA1 1 +#define GPIO_PA2 2 +#define GPIO_PA3 3 +#define GPIO_PA4 4 +#define GPIO_PA5 5 +#define GPIO_PA6 6 +#define GPIO_PA7 7 +#define GPIO_PA8 8 +#define GPIO_PA9 9 +#define GPIO_PA10 10 +#define GPIO_PA11 11 +#define GPIO_PA12 12 +#define GPIO_PA13 13 +#define GPIO_PA14 14 +#define GPIO_PA15 15 +#define GPIO_PB0 16 +#define GPIO_PB1 17 +#define GPIO_PB2 18 +#define GPIO_PB3 19 +#define GPIO_PB4 20 +#define GPIO_PB5 21 +#define GPIO_PB6 22 +#define GPIO_PB7 23 +#define GPIO_PB8 24 +#define GPIO_PB9 25 +#define GPIO_PB10 26 +#define GPIO_PB11 27 +#define GPIO_PB12 28 +#define GPIO_PB13 29 +#define GPIO_PB14 30 +#define GPIO_PB15 31 +#define GPIO_PC0 32 +#define GPIO_PC1 33 +#define GPIO_PC2 34 +#define GPIO_PC3 35 +#define GPIO_PC4 36 +#define GPIO_PC5 37 +#define GPIO_PC6 38 +#define GPIO_PC7 39 +#define GPIO_PC8 40 +#define GPIO_PC9 41 +#define GPIO_PC10 42 +#define GPIO_PC11 43 +#define GPIO_PC12 44 +#define GPIO_PC13 45 +#define GPIO_PC14 46 +#define GPIO_PC15 47 +#define GPIO_PD0 48 +#define GPIO_PD1 49 +#define GPIO_PD2 50 +#define GPIO_PD3 51 +#define GPIO_PD4 52 +#define GPIO_PD5 53 +#define GPIO_PD6 54 +#define GPIO_PD7 55 +#define GPIO_PD8 56 +#define GPIO_PD9 57 +#define GPIO_PD10 58 +#define GPIO_PD11 59 +#define GPIO_PD12 60 +#define GPIO_PD13 61 +#define GPIO_PD14 62 +#define GPIO_PD15 63 +#define GPIO_PE0 64 +#define GPIO_PE1 65 +#define GPIO_PE2 66 +#define GPIO_PE3 67 +#define GPIO_PE4 68 +#define GPIO_PE5 69 +#define GPIO_PE6 70 +#define GPIO_PE7 71 +#define GPIO_PE8 72 +#define GPIO_PE9 73 +#define GPIO_PE10 74 +#define GPIO_PE11 75 +#define GPIO_PE12 76 +#define GPIO_PE13 77 +#define GPIO_PE14 78 +#define GPIO_PE15 79 +#define GPIO_PF0 80 +#define GPIO_PF1 81 +#define GPIO_PF2 82 +#define GPIO_PF3 83 +#define GPIO_PF4 84 +#define GPIO_PF5 85 +#define GPIO_PF6 86 +#define GPIO_PF7 87 +#define GPIO_PF8 88 +#define GPIO_PF9 89 +#define GPIO_PF10 90 +#define GPIO_PF11 91 +#define GPIO_PF12 92 +#define GPIO_PF13 93 +#define GPIO_PF14 94 +#define GPIO_PF15 95 +#define GPIO_PG0 96 +#define GPIO_PG1 97 +#define GPIO_PG2 98 +#define GPIO_PG3 99 +#define GPIO_PG4 100 +#define GPIO_PG5 101 +#define GPIO_PG6 102 +#define GPIO_PG7 103 +#define GPIO_PG8 104 +#define GPIO_PG9 105 +#define GPIO_PG10 106 +#define GPIO_PG11 107 +#define GPIO_PG12 108 +#define GPIO_PG13 109 +#define GPIO_PG14 110 +#define GPIO_PG15 111 + +#ifndef __ASSEMBLY__ + +struct gpio_port_t { + unsigned long port_fer; + unsigned long port_fer_set; + unsigned long port_fer_clear; + unsigned long data; + unsigned long data_set; + unsigned long data_clear; + unsigned long dir; + unsigned long dir_set; + unsigned long dir_clear; + unsigned long inen; + unsigned long inen_set; + unsigned long inen_clear; + unsigned long port_mux; + unsigned long toggle; + unsigned long polar; + unsigned long polar_set; + unsigned long polar_clear; + unsigned long lock; + unsigned long spare; + unsigned long revid; +}; + +#endif + +#endif /* _MACH_GPIO_H_ */ diff --git a/arch/blackfin/include/asm/mach-bf609/portmux.h b/arch/blackfin/include/asm/mach-bf609/portmux.h new file mode 100644 index 0000000000..757570f2ef --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/portmux.h @@ -0,0 +1,257 @@ +/* + * Copyright 2008-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_PORTMUX_H_ +#define _MACH_PORTMUX_H_ + +#define MAX_RESOURCES MAX_BLACKFIN_GPIOS + +/* EMAC RMII Port Mux */ +#define P_MII0_MDC (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0)) +#define P_MII0_MDIO (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0)) +#define P_MII0_ETxD0 (P_DEFINED | P_IDENT(GPIO_PC2) | P_FUNCT(0)) +#define P_MII0_ERxD0 (P_DEFINED | P_IDENT(GPIO_PC0) | P_FUNCT(0)) +#define P_MII0_ETxD1 (P_DEFINED | P_IDENT(GPIO_PC3) | P_FUNCT(0)) +#define P_MII0_ERxD1 (P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(0)) +#define P_MII0_ETxEN (P_DEFINED | P_IDENT(GPIO_PB13) | P_FUNCT(0)) +#define P_MII0_PHYINT (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(0)) +#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0)) +#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0)) +#define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0)) + +#define P_RMII0 {\ + P_MII0_ETxD0, \ + P_MII0_ETxD1, \ + P_MII0_ETxEN, \ + P_MII0_ERxD0, \ + P_MII0_ERxD1, \ + P_MII0_ERxER, \ + P_MII0_TxCLK, \ + P_MII0_PHYINT, \ + P_MII0_CRS, \ + P_MII0_MDC, \ + P_PTP0_PPS, \ + P_PTP1_PPS, \ + P_MII0_MDIO, 0} + +#define P_MII1_MDC (P_DEFINED | P_IDENT(GPIO_PE10) | P_FUNCT(0)) +#define P_MII1_MDIO (P_DEFINED | P_IDENT(GPIO_PE11) | P_FUNCT(0)) +#define P_MII1_ETxD0 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0)) +#define P_MII1_ERxD0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0)) +#define P_MII1_ETxD1 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0)) +#define P_MII1_ERxD1 (P_DEFINED | P_IDENT(GPIO_PE15) | P_FUNCT(0)) +#define P_MII1_ETxEN (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0)) +#define P_MII1_PHYINT (P_DEFINED | P_IDENT(GPIO_PE12) | P_FUNCT(0)) +#define P_MII1_CRS (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0)) +#define P_MII1_ERxER (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0)) +#define P_MII1_TxCLK (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0)) + +#define P_RMII1 {\ + P_MII1_ETxD0, \ + P_MII1_ETxD1, \ + P_MII1_ETxEN, \ + P_MII1_ERxD0, \ + P_MII1_ERxD1, \ + P_MII1_ERxER, \ + P_MII1_TxCLK, \ + P_MII1_PHYINT, \ + P_MII1_CRS, \ + P_MII1_MDC, \ + P_MII1_MDIO, 0} + +/* PPI Port Mux */ +#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1)) +#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1)) +#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1)) +#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1)) +#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1)) +#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1)) +#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1)) +#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1)) +#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1)) +#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1)) +#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1)) +#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1)) +#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1)) +#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1)) +#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1)) +#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1)) +#define P_PPI0_D16 (P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(1)) +#define P_PPI0_D17 (P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(1)) +#define P_PPI0_D18 (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(1)) +#define P_PPI0_D19 (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(1)) +#define P_PPI0_D20 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(1)) +#define P_PPI0_D21 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(1)) +#define P_PPI0_D22 (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(1)) +#define P_PPI0_D23 (P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(1)) +#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PE9) | P_FUNCT(1)) +#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PE8) | P_FUNCT(1)) +#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(1)) +#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(1)) + +#define P_PPI1_D0 (P_DEFINED | P_IDENT(GPIO_PC0) | P_FUNCT(1)) +#define P_PPI1_D1 (P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(1)) +#define P_PPI1_D2 (P_DEFINED | P_IDENT(GPIO_PC2) | P_FUNCT(1)) +#define P_PPI1_D3 (P_DEFINED | P_IDENT(GPIO_PC3) | P_FUNCT(1)) +#define P_PPI1_D4 (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(1)) +#define P_PPI1_D5 (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(1)) +#define P_PPI1_D6 (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(1)) +#define P_PPI1_D7 (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(1)) +#define P_PPI1_D8 (P_DEFINED | P_IDENT(GPIO_PC8) | P_FUNCT(1)) +#define P_PPI1_D9 (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(1)) +#define P_PPI1_D10 (P_DEFINED | P_IDENT(GPIO_PC10) | P_FUNCT(1)) +#define P_PPI1_D11 (P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(1)) +#define P_PPI1_D12 (P_DEFINED | P_IDENT(GPIO_PC12) | P_FUNCT(1)) +#define P_PPI1_D13 (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(1)) +#define P_PPI1_D14 (P_DEFINED | P_IDENT(GPIO_PC14) | P_FUNCT(1)) +#define P_PPI1_D15 (P_DEFINED | P_IDENT(GPIO_PC15) | P_FUNCT(1)) +#define P_PPI1_D16 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(1)) +#define P_PPI1_D17 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(1)) +#define P_PPI1_CLK (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(1)) +#define P_PPI1_FS1 (P_DEFINED | P_IDENT(GPIO_PB13) | P_FUNCT(1)) +#define P_PPI1_FS2 (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(1)) +#define P_PPI1_FS3 (P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(1)) + +#define P_PPI2_D0 (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(1)) +#define P_PPI2_D1 (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(1)) +#define P_PPI2_D2 (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(1)) +#define P_PPI2_D3 (P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(1)) +#define P_PPI2_D4 (P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(1)) +#define P_PPI2_D5 (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(1)) +#define P_PPI2_D6 (P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(1)) +#define P_PPI2_D7 (P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(1)) +#define P_PPI2_D8 (P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(1)) +#define P_PPI2_D9 (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(1)) +#define P_PPI2_D10 (P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(1)) +#define P_PPI2_D11 (P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(1)) +#define P_PPI2_D12 (P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(1)) +#define P_PPI2_D13 (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(1)) +#define P_PPI2_D14 (P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(1)) +#define P_PPI2_D15 (P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(1)) +#define P_PPI2_D16 (P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(1)) +#define P_PPI2_D17 (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(1)) +#define P_PPI2_CLK (P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(1)) +#define P_PPI2_FS1 (P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(1)) +#define P_PPI2_FS2 (P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(1)) +#define P_PPI2_FS3 (P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(1)) + +/* SPI Port Mux */ +#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(3)) +#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(0)) +#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(0)) +#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(0)) +#define P_SPI0_RDY (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(0)) +#define P_SPI0_D2 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(0)) +#define P_SPI0_D3 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(0)) + +#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(0)) +#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(2)) +#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(2)) +#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PC15) | P_FUNCT(0)) +#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(0)) +#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(0)) +#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PC12) | P_FUNCT(0)) + +#define P_SPI1_SS (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(3)) +#define P_SPI1_SCK (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(0)) +#define P_SPI1_MISO (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(0)) +#define P_SPI1_MOSI (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(0)) +#define P_SPI1_RDY (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0)) +#define P_SPI1_D2 (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0)) +#define P_SPI1_D3 (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0)) + +#define P_SPI1_SSEL1 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(0)) +#define P_SPI1_SSEL2 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(2)) +#define P_SPI1_SSEL3 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(2)) +#define P_SPI1_SSEL4 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(2)) +#define P_SPI1_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0)) +#define P_SPI1_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0)) +#define P_SPI1_SSEL7 (P_DEFINED | P_IDENT(GPIO_PC14) | P_FUNCT(0)) + +#define GPIO_DEFAULT_BOOT_SPI_CS +#define P_DEFAULT_BOOT_SPI_CS + +/* UART Port Mux */ +#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(1)) +#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(1)) +#define P_UART0_RTS (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(1)) +#define P_UART0_CTS (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(1)) + +#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0)) +#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0)) +#define P_UART1_RTS (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0)) +#define P_UART1_CTS (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0)) + +/* Timer */ +#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(3)) +#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(2)) +#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1)) +#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(1)) +#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1)) +#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1)) +#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1)) +#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1)) +#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1)) + +/* RSI */ +#define P_RSI_DATA0 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(2)) +#define P_RSI_DATA1 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(2)) +#define P_RSI_DATA2 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(2)) +#define P_RSI_DATA3 (P_DEFINED | P_IDENT(GPIO_PE15) | P_FUNCT(2)) +#define P_RSI_DATA4 (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(2)) +#define P_RSI_DATA5 (P_DEFINED | P_IDENT(GPIO_PE12) | P_FUNCT(2)) +#define P_RSI_DATA6 (P_DEFINED | P_IDENT(GPIO_PE10) | P_FUNCT(2)) +#define P_RSI_DATA7 (P_DEFINED | P_IDENT(GPIO_PE11) | P_FUNCT(2)) +#define P_RSI_CMD (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1)) +#define P_RSI_CLK (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1)) + +/* PTP */ +#define P_PTP0_PPS (P_DEFINED | P_IDENT(GPIO_PB15) | P_FUNCT(0)) +#define P_PTP0_CLKIN (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(2)) +#define P_PTP0_AUXIN (P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(2)) + +#define P_PTP1_PPS (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0)) +#define P_PTP1_CLKIN (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(2)) +#define P_PTP1_AUXIN (P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(2)) + +/* SMC Port Mux */ +#define P_A3 (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0)) +#define P_A4 (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0)) +#define P_A5 (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0)) +#define P_A6 (P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(0)) +#define P_A7 (P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(0)) +#define P_A8 (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(0)) +#define P_A9 (P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(0)) +#define P_A10 (P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(0)) +#define P_A11 (P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(0)) +#define P_A12 (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(0)) +#define P_A13 (P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(0)) +#define P_A14 (P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(0)) +#define P_A15 (P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(0)) +#define P_A16 (P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(0)) +#define P_A17 (P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(0)) +#define P_A18 (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(0)) +#define P_A19 (P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(0)) +#define P_A20 (P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(0)) +#define P_A21 (P_DEFINED | P_IDENT(GPIO_PB6) | P_FUNCT(0)) +#define P_A22 (P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(0)) +#define P_A23 (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(0)) +#define P_A24 (P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(0)) +#define P_A25 (P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(0)) +#define P_NORCK (P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(0)) + +#define P_AMS1 (P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(0)) +#define P_AMS2 (P_DEFINED | P_IDENT(GPIO_PB4) | P_FUNCT(0)) +#define P_AMS3 (P_DEFINED | P_IDENT(GPIO_PB5) | P_FUNCT(0)) + +#define P_ABE0 (P_DEFINED | P_IDENT(GPIO_PB4) | P_FUNCT(1)) +#define P_ABE1 (P_DEFINED | P_IDENT(GPIO_PB5) | P_FUNCT(1)) + +/* CAN */ +#define P_CAN0_TX (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(2)) +#define P_CAN0_RX (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(2)) + +#endif /* _MACH_PORTMUX_H_ */ diff --git a/arch/blackfin/include/asm/mach-bf609/ports.h b/arch/blackfin/include/asm/mach-bf609/ports.h new file mode 100644 index 0000000000..b361c7bcbe --- /dev/null +++ b/arch/blackfin/include/asm/mach-bf609/ports.h @@ -0,0 +1,103 @@ +/* + * Port Masks + */ + +#ifndef __BFIN_PERIPHERAL_PORT__ +#define __BFIN_PERIPHERAL_PORT__ + +/* PORTx_MUX Masks */ +#define PORT_x_MUX_0_MASK 0x00000003 +#define PORT_x_MUX_1_MASK 0x0000000C +#define PORT_x_MUX_2_MASK 0x00000030 +#define PORT_x_MUX_3_MASK 0x000000C0 +#define PORT_x_MUX_4_MASK 0x00000300 +#define PORT_x_MUX_5_MASK 0x00000C00 +#define PORT_x_MUX_6_MASK 0x00003000 +#define PORT_x_MUX_7_MASK 0x0000C000 +#define PORT_x_MUX_8_MASK 0x00030000 +#define PORT_x_MUX_9_MASK 0x000C0000 +#define PORT_x_MUX_10_MASK 0x00300000 +#define PORT_x_MUX_11_MASK 0x00C00000 +#define PORT_x_MUX_12_MASK 0x03000000 +#define PORT_x_MUX_13_MASK 0x0C000000 +#define PORT_x_MUX_14_MASK 0x30000000 +#define PORT_x_MUX_15_MASK 0xC0000000 + +#define PORT_x_MUX_FUNC_1 (0x0) +#define PORT_x_MUX_FUNC_2 (0x1) +#define PORT_x_MUX_FUNC_3 (0x2) +#define PORT_x_MUX_FUNC_4 (0x3) +#define PORT_x_MUX_0_FUNC_1 (PORT_x_MUX_FUNC_1 << 0) +#define PORT_x_MUX_0_FUNC_2 (PORT_x_MUX_FUNC_2 << 0) +#define PORT_x_MUX_0_FUNC_3 (PORT_x_MUX_FUNC_3 << 0) +#define PORT_x_MUX_0_FUNC_4 (PORT_x_MUX_FUNC_4 << 0) +#define PORT_x_MUX_1_FUNC_1 (PORT_x_MUX_FUNC_1 << 2) +#define PORT_x_MUX_1_FUNC_2 (PORT_x_MUX_FUNC_2 << 2) +#define PORT_x_MUX_1_FUNC_3 (PORT_x_MUX_FUNC_3 << 2) +#define PORT_x_MUX_1_FUNC_4 (PORT_x_MUX_FUNC_4 << 2) +#define PORT_x_MUX_2_FUNC_1 (PORT_x_MUX_FUNC_1 << 4) +#define PORT_x_MUX_2_FUNC_2 (PORT_x_MUX_FUNC_2 << 4) +#define PORT_x_MUX_2_FUNC_3 (PORT_x_MUX_FUNC_3 << 4) +#define PORT_x_MUX_2_FUNC_4 (PORT_x_MUX_FUNC_4 << 4) +#define PORT_x_MUX_3_FUNC_1 (PORT_x_MUX_FUNC_1 << 6) +#define PORT_x_MUX_3_FUNC_2 (PORT_x_MUX_FUNC_2 << 6) +#define PORT_x_MUX_3_FUNC_3 (PORT_x_MUX_FUNC_3 << 6) +#define PORT_x_MUX_3_FUNC_4 (PORT_x_MUX_FUNC_4 << 6) +#define PORT_x_MUX_4_FUNC_1 (PORT_x_MUX_FUNC_1 << 8) +#define PORT_x_MUX_4_FUNC_2 (PORT_x_MUX_FUNC_2 << 8) +#define PORT_x_MUX_4_FUNC_3 (PORT_x_MUX_FUNC_3 << 8) +#define PORT_x_MUX_4_FUNC_4 (PORT_x_MUX_FUNC_4 << 8) +#define PORT_x_MUX_5_FUNC_1 (PORT_x_MUX_FUNC_1 << 10) +#define PORT_x_MUX_5_FUNC_2 (PORT_x_MUX_FUNC_2 << 10) +#define PORT_x_MUX_5_FUNC_3 (PORT_x_MUX_FUNC_3 << 10) +#define PORT_x_MUX_5_FUNC_4 (PORT_x_MUX_FUNC_4 << 10) +#define PORT_x_MUX_6_FUNC_1 (PORT_x_MUX_FUNC_1 << 12) +#define PORT_x_MUX_6_FUNC_2 (PORT_x_MUX_FUNC_2 << 12) +#define PORT_x_MUX_6_FUNC_3 (PORT_x_MUX_FUNC_3 << 12) +#define PORT_x_MUX_6_FUNC_4 (PORT_x_MUX_FUNC_4 << 12) +#define PORT_x_MUX_7_FUNC_1 (PORT_x_MUX_FUNC_1 << 14) +#define PORT_x_MUX_7_FUNC_2 (PORT_x_MUX_FUNC_2 << 14) +#define PORT_x_MUX_7_FUNC_3 (PORT_x_MUX_FUNC_3 << 14) +#define PORT_x_MUX_7_FUNC_4 (PORT_x_MUX_FUNC_4 << 14) +#define PORT_x_MUX_8_FUNC_1 (PORT_x_MUX_FUNC_1 << 16) +#define PORT_x_MUX_8_FUNC_2 (PORT_x_MUX_FUNC_2 << 16) +#define PORT_x_MUX_8_FUNC_3 (PORT_x_MUX_FUNC_3 << 16) +#define PORT_x_MUX_8_FUNC_4 (PORT_x_MUX_FUNC_4 << 16) +#define PORT_x_MUX_9_FUNC_1 (PORT_x_MUX_FUNC_1 << 18) +#define PORT_x_MUX_9_FUNC_2 (PORT_x_MUX_FUNC_2 << 18) +#define PORT_x_MUX_9_FUNC_3 (PORT_x_MUX_FUNC_3 << 18) +#define PORT_x_MUX_9_FUNC_4 (PORT_x_MUX_FUNC_4 << 18) +#define PORT_x_MUX_10_FUNC_1 (PORT_x_MUX_FUNC_1 << 20) +#define PORT_x_MUX_10_FUNC_2 (PORT_x_MUX_FUNC_2 << 20) +#define PORT_x_MUX_10_FUNC_3 (PORT_x_MUX_FUNC_3 << 20) +#define PORT_x_MUX_10_FUNC_4 (PORT_x_MUX_FUNC_4 << 20) +#define PORT_x_MUX_11_FUNC_1 (PORT_x_MUX_FUNC_1 << 22) +#define PORT_x_MUX_11_FUNC_2 (PORT_x_MUX_FUNC_2 << 22) +#define PORT_x_MUX_11_FUNC_3 (PORT_x_MUX_FUNC_3 << 22) +#define PORT_x_MUX_11_FUNC_4 (PORT_x_MUX_FUNC_4 << 22) +#define PORT_x_MUX_12_FUNC_1 (PORT_x_MUX_FUNC_1 << 24) +#define PORT_x_MUX_12_FUNC_2 (PORT_x_MUX_FUNC_2 << 24) +#define PORT_x_MUX_12_FUNC_3 (PORT_x_MUX_FUNC_3 << 24) +#define PORT_x_MUX_12_FUNC_4 (PORT_x_MUX_FUNC_4 << 24) +#define PORT_x_MUX_13_FUNC_1 (PORT_x_MUX_FUNC_1 << 26) +#define PORT_x_MUX_13_FUNC_2 (PORT_x_MUX_FUNC_2 << 26) +#define PORT_x_MUX_13_FUNC_3 (PORT_x_MUX_FUNC_3 << 26) +#define PORT_x_MUX_13_FUNC_4 (PORT_x_MUX_FUNC_4 << 26) +#define PORT_x_MUX_14_FUNC_1 (PORT_x_MUX_FUNC_1 << 28) +#define PORT_x_MUX_14_FUNC_2 (PORT_x_MUX_FUNC_2 << 28) +#define PORT_x_MUX_14_FUNC_3 (PORT_x_MUX_FUNC_3 << 28) +#define PORT_x_MUX_14_FUNC_4 (PORT_x_MUX_FUNC_4 << 28) +#define PORT_x_MUX_15_FUNC_1 (PORT_x_MUX_FUNC_1 << 30) +#define PORT_x_MUX_15_FUNC_2 (PORT_x_MUX_FUNC_2 << 30) +#define PORT_x_MUX_15_FUNC_3 (PORT_x_MUX_FUNC_3 << 30) +#define PORT_x_MUX_15_FUNC_4 (PORT_x_MUX_FUNC_4 << 30) + +#include "../mach-common/bits/ports-a.h" +#include "../mach-common/bits/ports-b.h" +#include "../mach-common/bits/ports-c.h" +#include "../mach-common/bits/ports-d.h" +#include "../mach-common/bits/ports-e.h" +#include "../mach-common/bits/ports-f.h" +#include "../mach-common/bits/ports-g.h" + +#endif diff --git a/arch/blackfin/include/asm/mach-common/bits/cgu.h b/arch/blackfin/include/asm/mach-common/bits/cgu.h new file mode 100644 index 0000000000..cdf7349925 --- /dev/null +++ b/arch/blackfin/include/asm/mach-common/bits/cgu.h @@ -0,0 +1,80 @@ +/* + * CGU Masks + */ + +#ifndef __BFIN_PERIPHERAL_CGU__ +#define __BFIN_PERIPHERAL_CGU__ + +/* CGU_CTL Masks */ +#define DF (1 << 0) +#define MSEL (0x7f << MSEL_P) +#define WIDLE (1 << WIDLE_P) +#define LOCK (1 << LOCK_P) + +#define DF_P 0 +#define MSEL_P 8 +#define WIDLE_P 30 +#define LOCK_P 31 +#define MSEL_MASK 0x7F00 +#define DF_MASK 0x1 + +/* CGU_STAT Masks */ +#define PLLEN (1 << 0) +#define PLLBP (1 << 1) +#define PLLLK (1 << 2) +#define CLKSALGN (1 << 3) +#define CCBF0EN (1 << 4) +#define CCBF1EN (1 << 5) +#define SCBF0EN (1 << 6) +#define SCBF1EN (1 << 7) +#define DCBFEN (1 << 8) +#define OCBFEN (1 << 9) +#define ADRERR (1 << 16) +#define LWERR (1 << 17) +#define DIVERR (1 << 18) +#define WDFMSERR (1 << 19) +#define WDIVERR (1 << 20) +#define PLLLKERR (1 << 21) + +/* CGU_DIV Masks */ +#define CSEL (0x1f << CSEL_P) +#define S0SEL (3 << S0SEL_P) +#define SYSSEL (0x1f << SYSSEL_P) +#define S1SEL (3 << S1SEL_P) +#define DSEL (0x1f << DSEL_P) +#define OSEL (0x7f << OSEL_P) +#define ALGN (1 << ALGN_P) +#define UPDT (1 << UPDT_P) +#define LOCK (1 << LOCK_P) + +#define CSEL_P 0 +#define S0SEL_P 5 +#define SYSSEL_P 8 +#define S1SEL_P 13 +#define DSEL_P 16 +#define OSEL_P 22 +#define ALGN_P 29 +#define UPDT_P 30 +#define LOCK_P 31 + +/* CGU_CLKOUTSEL Masks */ +#define CLKOUTSEL (0xf << 0) +#define USBCLKSEL (0x3f << 16) +#define LOCK (1 << LOCK_P) + +#define LOCK_P 31 + +#define CLKOUTSEL_CLKIN 0x0 +#define CLKOUTSEL_CCLK 0x1 +#define CLKOUTSEL_SYSCLK 0x2 +#define CLKOUTSEL_SCLK0 0x3 +#define CLKOUTSEL_SCLK1 0x4 +#define CLKOUTSEL_DCLK 0x5 +#define CLKOUTSEL_USB_PLL 0x6 +#define CLKOUTSEL_OUTCLK 0x7 +#define CLKOUTSEL_USB_CLKIN 0x8 +#define CLKOUTSEL_WDOG 0x9 +#define CLKOUTSEL_PMON 0xA +#define CLKOUTSEL_GND 0xB + +#endif diff --git a/arch/blackfin/include/asm/mach-common/bits/dde.h b/arch/blackfin/include/asm/mach-common/bits/dde.h new file mode 100644 index 0000000000..f7b0bb90f3 --- /dev/null +++ b/arch/blackfin/include/asm/mach-common/bits/dde.h @@ -0,0 +1,88 @@ +/* + * Distributed DMA Engine (DDE) Masks + */ + +#ifndef __BFIN_PERIPHERAL_DDE__ +#define __BFIN_PERIPHERAL_DDE__ + +/* DMA_CONFIG Masks */ +#define DMAEN (1 << DMAEN_P) /* DMA Channel Enable */ +#define WNR (1 << WNR_P) /* Channel Direction (W/R*) */ +#define SYNC (1 << SYNC_P) /* Sync Work Unit Transitions */ +#define CADDR (1 << CADDR_P) /* Use Current Address */ +#define PSIZE (7 << PSIZE_P) /* Peripheral Word Size */ +#define PSIZE_1 (0 << PSIZE_P) +#define PSIZE_2 (1 << PSIZE_P) +#define PSIZE_4 (2 << PSIZE_P) +#define PSIZE_8 (3 << PSIZE_P) +#define MSIZE (7 << MSIZE_P) /* Memory Transfer Size */ +#define MSIZE_1 (0 << MSIZE_P) +#define MSIZE_2 (1 << MSIZE_P) +#define MSIZE_4 (2 << MSIZE_P) +#define MSIZE_8 (3 << MSIZE_P) +#define MSIZE_16 (4 << MSIZE_P) +#define MSIZE_32 (5 << MSIZE_P) +#define FLOW (7 << FLOW_P) /* Next Operation */ +#define FLOW_STOP (0 << FLOW_P) /* Stop Mode */ +#define FLOW_AUTO (1 << FLOW_P) /* Autobuffer Mode */ +#define FLOW_DSCL (4 << FLOW_P) /* Descriptor List */ +#define FLOW_DSCA (5 << FLOW_P) /* Descriptor Array */ +#define FLOW_DSDL (6 << FLOW_P) /* Descriptor On Demand List */ +#define FLOW_DSDA (7 << FLOW_P) /* Descriptor On Demand Array */ +#define NDSIZE (7 << NDSIZE_P) /* Next Descriptor Set Size */ +#define NDSIZE_1 (0 << NDSIZE_P) +#define NDSIZE_2 (1 << NDSIZE_P) +#define NDSIZE_3 (2 << NDSIZE_P) +#define NDSIZE_4 (3 << NDSIZE_P) +#define NDSIZE_5 (4 << NDSIZE_P) +#define NDSIZE_6 (5 << NDSIZE_P) +#define NDSIZE_7 (6 << NDSIZE_P) +#define DI_EN_X (1 << INT_P) +#define DI_EN_Y (2 << INT_P) +#define DI_EN_P (3 << INT_P) +#define DI_EN (DI_EN_X) +#define DI_XCOUNT_EN (1 << INT_P) /* xcount expires interrupt */ +#define TRIG (3 << TRIG_P) /* Generate Trigger */ +#define TOVEN (1 << TOVEN_P) +#define DESCIDCPY (1 << DESCIDCPY_P) +#define TWOD (1 << TWOD_P) +#define PDRF (1 << PDRF_P) + +#define DMAEN_P 0 +#define WNR_P 1 +#define SYNC_P 2 +#define CADDR_P 3 +#define PSIZE_P 4 +#define MSIZE_P 8 +#define FLOW_P 12 +#define TWAIT_P 15 +#define NDSIZE_P 16 +#define INT_P 20 +#define TRIG_P 22 +#define TOVEN_P 24 +#define DESCIDCPY_P 25 +#define TWOD_P 26 +#define PDRF_P 28 + +/* DMA_STATUS Masks */ +#define DMA_DONE (1 << DMA_DONE_P) /* Work Unit/Row Done */ +#define DMA_ERR (1 << DMA_ERR_P) /* Error Interrupt */ +#define DMA_PIRQ (1 << DMA_PIRQ_P) /* Peri Intr Request */ +#define DMA_ERRC (7 << DMA_ERRC_P) /* Error Cause */ +#define DMA_RUN (7 << DMA_RUN_P) /* Run Status */ +#define DMA_PBWIDTH (3 << DMA_PBWIDTH_P) /* Peri Bus Width */ +#define DMA_MBWIDTH (3 << DMA_MBWIDTH_P) /* Memory Bus Width */ +#define DMA_FIFOFILL (7 << DMA_FIFOFILL_P) /* FIFO Fill Status */ +#define DMA_TWAIT (1 << DMA_TWAIT_P) /* Trigger Wait Stat */ + +#define DMA_DONE_P 0 +#define DMA_ERR_P 1 +#define DMA_PIRQ_P 2 +#define DMA_ERRC_P 4 +#define DMA_RUN_P 8 +#define DMA_PBWIDTH_P 12 +#define DMA_MBWIDTH_P 14 +#define DMA_FIFOFILL_P 16 +#define DMA_TWAIT_P 20 + +#endif diff --git a/arch/blackfin/include/asm/mach-common/bits/dma.h b/arch/blackfin/include/asm/mach-common/bits/dma.h index 136313e613..ac426addd4 100644 --- a/arch/blackfin/include/asm/mach-common/bits/dma.h +++ b/arch/blackfin/include/asm/mach-common/bits/dma.h @@ -9,14 +9,54 @@ #define DMAEN 0x0001 /* DMA Channel Enable */ #define WNR 0x0002 /* Channel Direction (W/R*) */ #define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ + +#ifdef CONFIG_BF60x + +#define PSIZE_8 0x00000000 /* Transfer Word Size = 16 */ +#define PSIZE_16 0x00000010 /* Transfer Word Size = 16 */ +#define PSIZE_32 0x00000020 /* Transfer Word Size = 32 */ +#define PSIZE_64 0x00000030 /* Transfer Word Size = 32 */ +#define WDSIZE_16 0x00000100 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x00000200 /* Transfer Word Size = 32 */ +#define WDSIZE_64 0x00000300 /* Transfer Word Size = 32 */ +#define WDSIZE_128 0x00000400 /* Transfer Word Size = 32 */ +#define WDSIZE_256 0x00000500 /* Transfer Word Size = 32 */ +#define DMA2D 0x04000000 /* DMA Mode (2D/1D*) */ +#define RESTART 0x00000004 /* DMA Buffer Clear SYNC */ +#define DI_EN_X 0x00100000 /* Data Int Enable in X count */ +#define DI_EN_Y 0x00200000 /* Data Int Enable in Y count */ +#define DI_EN_P 0x00300000 /* Data Int Enable in Peri */ +#define DI_EN DI_EN_X /* Data Int Enable */ +#define NDSIZE_0 0x00000000 /* Next Desc Size = 0 */ +#define NDSIZE_1 0x00010000 /* Next Desc Size = 1 */ +#define NDSIZE_2 0x00020000 /* Next Desc Size = 2 */ +#define NDSIZE_3 0x00030000 /* Next Desc Size = 3 */ +#define NDSIZE_4 0x00040000 /* Next Desc Size = 4 */ +#define NDSIZE_5 0x00050000 /* Next Desc Size = 5 */ +#define NDSIZE_6 0x00060000 /* Next Desc Size = 6 */ +#define NDSIZE 0x00070000 /* Next Desc Size */ +#define NDSIZE_OFFSET 16 /* Next Desc Size Offset */ +#define DMAFLOW_LIST 0x00004000 /* Desc List Mode */ +#define DMAFLOW_ARRAY 0x00005000 /* Desc Array Mode */ +#define DMAFLOW_LIST_DEMAND 0x00006000 /* Desc Demand List Mode */ +#define DMAFLOW_ARRAY_DEMAND 0x00007000 /* Desc Demand Array Mode */ +#define DMA_RUN_DFETCH 0x00000100 /* DMA Channel Run (DFETCH) */ +#define DMA_RUN 0x00000200 /* DMA Channel Run */ +#define DMA_RUN_WAIT_TRIG 0x00000300 /* DMA Channel Run (WAIT TRIG)*/ +#define DMA_RUN_WAIT_ACK 0x00000400 /* DMA Channel Run (WAIT ACK) */ + +#else + #define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ #define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ +#define PSIZE_16 WDSIZE_16 +#define PSIZE_32 WDSIZE_32 #define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ #define RESTART 0x0020 /* DMA Buffer Clear */ #define DI_SEL 0x0040 /* Data Interrupt Timing Select */ #define DI_EN 0x0080 /* Data Interrupt Enable */ #define NDSIZE 0x0F00 /* Next Descriptor bitmask */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 */ #define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ #define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ #define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ @@ -26,14 +66,13 @@ #define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ #define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ #define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define FLOW_STOP 0x0000 /* Stop Mode */ -#define FLOW_AUTO 0x1000 /* Autobuffer Mode */ #define FLOW_ARRAY 0x4000 /* Descriptor Array Mode */ #define FLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ #define FLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ #define DMAEN_P 0 /* Channel Enable */ #define WNR_P 1 /* Channel Direction (W/R*) */ +#define WDSIZE_P 2 /* Transfer Word Size */ #define DMA2D_P 4 /* 2D/1D* Mode */ #define RESTART_P 5 /* Restart */ #define DI_SEL_P 6 /* Data Interrupt Select */ @@ -45,14 +84,19 @@ #define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ #define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ +#endif +#define DMAFLOW 0x7000 /* Flow Control */ +#define FLOW_STOP 0x0000 /* Stop Mode */ +#define FLOW_AUTO 0x1000 /* Autobuffer Mode */ + #define DMA_DONE_P 0 /* DMA Done Indicator */ #define DMA_ERR_P 1 /* DMA Error Indicator */ #define DFETCH_P 2 /* Descriptor Fetch Indicator */ #define DMA_RUN_P 3 /* DMA Running Indicator */ /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ -#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ -#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ +#define CTYPE 0x0040 /* DMA Channel Type (Mem/Peri) */ +#define CTYPE_P 6 /* DMA Channel Type BIT POSITION */ #define PMAP 0xF000 /* Peripheral Mapped To This Channel */ #endif diff --git a/arch/blackfin/include/asm/mach-common/bits/mpu.h b/arch/blackfin/include/asm/mach-common/bits/mpu.h index 39998f82aa..cfde2364d7 100644 --- a/arch/blackfin/include/asm/mach-common/bits/mpu.h +++ b/arch/blackfin/include/asm/mach-common/bits/mpu.h @@ -70,7 +70,11 @@ #define PAGE_SIZE_4KB 0x00010000 /* 4 KB page size */ #define PAGE_SIZE_1MB 0x00020000 /* 1 MB page size */ #define PAGE_SIZE_4MB 0x00030000 /* 4 MB page size */ -#define PAGE_SIZE_MASK 0x00030000 /* the bits for the page_size field */ +#define PAGE_SIZE_16KB 0x00040000 /* 16 KB page size */ +#define PAGE_SIZE_64KB 0x00050000 /* 64 KB page size */ +#define PAGE_SIZE_16MB 0x00060000 /* 16 MB page size */ +#define PAGE_SIZE_64MB 0x00070000 /* 64 MB page size */ +#define PAGE_SIZE_MASK 0x00070000 /* page_size field mask */ #define PAGE_SIZE_SHIFT 16 #define CPLB_L1SRAM 0x00000020 /* 0=SRAM mapped in L1, 0=SRAM not mapped to L1 */ #define CPLB_PORTPRIO 0x00000200 /* 0=low priority port, 1= high priority port */ diff --git a/arch/blackfin/include/asm/mach-common/bits/pll.h b/arch/blackfin/include/asm/mach-common/bits/pll.h index 9009f26401..fe0ba0f543 100644 --- a/arch/blackfin/include/asm/mach-common/bits/pll.h +++ b/arch/blackfin/include/asm/mach-common/bits/pll.h @@ -16,6 +16,8 @@ #define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */ #define SPORT_HYST 0x8000 /* Enable Additional Hysteresis on SPORT Input Pins */ +#define MSEL_P 9 + /* PLL_DIV Masks */ #define SSEL 0x000F /* System Select */ #define CSEL 0x0030 /* Core Select */ @@ -29,6 +31,9 @@ #define CCLK_DIV4 CSEL_DIV4 #define CCLK_DIV8 CSEL_DIV8 +#define SSEL_P 0 +#define CSEL_P 4 + /* PLL_STAT Masks */ #define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */ #define FULL_ON 0x0002 /* Processor In Full On Mode */ diff --git a/arch/blackfin/include/asm/mach-common/bits/sdh.h b/arch/blackfin/include/asm/mach-common/bits/sdh.h index 8c5dd33f5c..1c60d4b831 100644 --- a/arch/blackfin/include/asm/mach-common/bits/sdh.h +++ b/arch/blackfin/include/asm/mach-common/bits/sdh.h @@ -12,18 +12,35 @@ #define CMD_INT_E 0x100 /* Command Interrupt */ #define CMD_PEND_E 0x200 /* Command Pending */ #define CMD_E 0x400 /* Command Enable */ +#ifdef RSI_BLKSZ +#define CMD_CRC_CHECK_D 0x800 /* CRC Check is disabled */ +#define CMD_DATA0_BUSY 0x1000 /* Check Busy State on DATA0 */ +#endif /* Bit masks for SDH_PWR_CTL */ +#ifndef RSI_BLKSZ #define PWR_ON 0x3 /* Power On */ #define SD_CMD_OD 0x40 /* Open Drain Output */ #define ROD_CTL 0x80 /* Rod Control */ +#endif /* Bit masks for SDH_CLK_CTL */ #define CLKDIV 0xff /* MC_CLK Divisor */ #define CLK_E 0x100 /* MC_CLK Bus Clock Enable */ #define PWR_SV_E 0x200 /* Power Save Enable */ #define CLKDIV_BYPASS 0x400 /* Bypass Divisor */ -#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */ +#define BUS_MODE_MASK 0x1800 /* Bus Mode Mask */ +#define STD_BUS_1 0x000 /* Standard Bus 1 bit mode */ +#define WIDE_BUS_4 0x800 /* Wide Bus 4 bit mode */ +#define BYTE_BUS_8 0x1000 /* Byte Bus 8 bit mode */ +#ifdef RSI_BLKSZ +#define CARD_TYPE_MASK 0xe000 /* Card type mask */ +#define CARD_TYPE_OFFSET 13 /* Card type offset */ +#define CARD_TYPE_SDIO 0 +#define CARD_TYPE_eMMC 1 +#define CARD_TYPE_SD 2 +#define CARD_TYPE_CEATA 3 +#endif /* Bit masks for SDH_RESP_CMD */ #define RESP_CMD 0x3f /* Response Command */ @@ -33,7 +50,13 @@ #define DTX_DIR 0x2 /* Data Transfer Direction */ #define DTX_MODE 0x4 /* Data Transfer Mode */ #define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */ +#ifndef RSI_BLKSZ #define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */ +#else + +/* Bit masks for SDH_BLK_SIZE */ +#define DTX_BLK_LGTH 0x1fff /* Data Transfer Block Length */ +#endif /* Bit masks for SDH_STATUS */ #define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */ @@ -102,10 +125,13 @@ /* Bit masks for SDH_E_STATUS */ #define SDIO_INT_DET 0x2 /* SDIO Int Detected */ #define SD_CARD_DET 0x10 /* SD Card Detect */ +#define SD_CARD_BUSYMODE 0x80000000 /* Card is in Busy mode */ +#define SD_CARD_SLPMODE 0x40000000 /* Card in Sleep Mode */ +#define SD_CARD_READY 0x00020000 /* Card Ready */ /* Bit masks for SDH_E_MASK */ #define SDIO_MSK 0x2 /* Mask SDIO Int Detected */ -#define SCD_MSK 0x40 /* Mask Card Detect */ +#define SCD_MSK 0x10 /* Mask Card Detect */ /* Bit masks for SDH_CFG */ #define CLKS_EN 0x1 /* Clocks Enable */ @@ -114,7 +140,15 @@ #define SD_RST 0x10 /* SDMMC Reset */ #define PUP_SDDAT 0x20 /* Pull-up SD_DAT */ #define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */ +#ifndef RSI_BLKSZ #define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */ +#else +#define PWR_ON 0x600 /* Power On */ +#define SD_CMD_OD 0x800 /* Open Drain Output */ +#define BOOT_EN 0x1000 /* Boot Enable */ +#define BOOT_MODE 0x2000 /* Alternate Boot Mode */ +#define BOOT_ACK_EN 0x4000 /* Boot ACK is expected */ +#endif /* Bit masks for SDH_RD_WAIT_EN */ #define RWR 0x1 /* Read Wait Request */ diff --git a/arch/blackfin/include/asm/mach-common/bits/spi6xx.h b/arch/blackfin/include/asm/mach-common/bits/spi6xx.h new file mode 100644 index 0000000000..3368712e3f --- /dev/null +++ b/arch/blackfin/include/asm/mach-common/bits/spi6xx.h @@ -0,0 +1,240 @@ +/* + * Analog Devices bfin_spi3 controller driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPI_CHANNEL_H_ +#define _SPI_CHANNEL_H_ + +#include <linux/types.h> + +/* SPI_CONTROL */ +#define SPI_CTL_EN 0x00000001 /* Enable */ +#define SPI_CTL_MSTR 0x00000002 /* Master/Slave */ +#define SPI_CTL_PSSE 0x00000004 /* controls modf error in master mode */ +#define SPI_CTL_ODM 0x00000008 /* Open Drain Mode */ +#define SPI_CTL_CPHA 0x00000010 /* Clock Phase */ +#define SPI_CTL_CPOL 0x00000020 /* Clock Polarity */ +#define SPI_CTL_ASSEL 0x00000040 /* Slave Select Pin Control */ +#define SPI_CTL_SELST 0x00000080 /* Slave Select Polarity in transfers */ +#define SPI_CTL_EMISO 0x00000100 /*Enable MISO */ +#define SPI_CTL_SIZE 0x00000600 /*Word Transfer Size */ +#define SPI_CTL_SIZE08 0x00000000 /*SIZE: 8 bits */ +#define SPI_CTL_SIZE16 0x00000200 /*SIZE: 16 bits */ +#define SPI_CTL_SIZE32 0x00000400 /*SIZE: 32 bits */ +#define SPI_CTL_LSBF 0x00001000 /*LSB First */ +#define SPI_CTL_FCEN 0x00002000 /*Flow-Control Enable */ +#define SPI_CTL_FCCH 0x00004000 /*Flow-Control Channel Selection */ +#define SPI_CTL_FCPL 0x00008000 /*Flow-Control Polarity */ +#define SPI_CTL_FCWM 0x00030000 /*Flow-Control Water-Mark */ +#define SPI_CTL_FIFO0 0x00000000 /*FCWM: Tx empty or Rx Full */ +#define SPI_CTL_FIFO1 0x00010000 /*FCWM: Tx empty or Rx full (>=75%) */ +#define SPI_CTL_FIFO2 0x00020000 /*FCWM: Tx empty or Rx full (>=50%) */ +#define SPI_CTL_FMODE 0x00040000 /*Fast-mode Enable */ +#define SPI_CTL_MIOM 0x00300000 /*Multiple I/O Mode */ +#define SPI_CTL_MIO_DIS 0x00000000 /*MIOM: Disable */ +#define SPI_CTL_MIO_DUAL 0x00100000 /*MIOM: Enable DIOM (Dual I/O Mode) */ +#define SPI_CTL_MIO_QUAD 0x00200000 /*MIOM: Enable QUAD (Quad SPI Mode) */ +#define SPI_CTL_SOSI 0x00400000 /*Start on MOSI */ +/* SPI_RX_CONTROL */ +#define SPI_RXCTL_REN 0x00000001 /*Receive Channel Enable */ +#define SPI_RXCTL_RTI 0x00000004 /*Receive Transfer Initiate */ +#define SPI_RXCTL_RWCEN 0x00000008 /*Receive Word Counter Enable */ +#define SPI_RXCTL_RDR 0x00000070 /*Receive Data Request */ +#define SPI_RXCTL_RDR_DIS 0x00000000 /*RDR: Disabled */ +#define SPI_RXCTL_RDR_NE 0x00000010 /*RDR: RFIFO not empty */ +#define SPI_RXCTL_RDR_25 0x00000020 /*RDR: RFIFO 25% full */ +#define SPI_RXCTL_RDR_50 0x00000030 /*RDR: RFIFO 50% full */ +#define SPI_RXCTL_RDR_75 0x00000040 /*RDR: RFIFO 75% full */ +#define SPI_RXCTL_RDR_FULL 0x00000050 /*RDR: RFIFO full */ +#define SPI_RXCTL_RDO 0x00000100 /*Receive Data Over-Run */ +#define SPI_RXCTL_RRWM 0x00003000 /*FIFO Regular Water-Mark */ +#define SPI_RXCTL_RWM_0 0x00000000 /*RRWM: RFIFO Empty */ +#define SPI_RXCTL_RWM_25 0x00001000 /*RRWM: RFIFO 25% full */ +#define SPI_RXCTL_RWM_50 0x00002000 /*RRWM: RFIFO 50% full */ +#define SPI_RXCTL_RWM_75 0x00003000 /*RRWM: RFIFO 75% full */ +#define SPI_RXCTL_RUWM 0x00070000 /*FIFO Urgent Water-Mark */ +#define SPI_RXCTL_UWM_DIS 0x00000000 /*RUWM: Disabled */ +#define SPI_RXCTL_UWM_25 0x00010000 /*RUWM: RFIFO 25% full */ +#define SPI_RXCTL_UWM_50 0x00020000 /*RUWM: RFIFO 50% full */ +#define SPI_RXCTL_UWM_75 0x00030000 /*RUWM: RFIFO 75% full */ +#define SPI_RXCTL_UWM_FULL 0x00040000 /*RUWM: RFIFO full */ +/* SPI_TX_CONTROL */ +#define SPI_TXCTL_TEN 0x00000001 /*Transmit Channel Enable */ +#define SPI_TXCTL_TTI 0x00000004 /*Transmit Transfer Initiate */ +#define SPI_TXCTL_TWCEN 0x00000008 /*Transmit Word Counter Enable */ +#define SPI_TXCTL_TDR 0x00000070 /*Transmit Data Request */ +#define SPI_TXCTL_TDR_DIS 0x00000000 /*TDR: Disabled */ +#define SPI_TXCTL_TDR_NF 0x00000010 /*TDR: TFIFO not full */ +#define SPI_TXCTL_TDR_25 0x00000020 /*TDR: TFIFO 25% empty */ +#define SPI_TXCTL_TDR_50 0x00000030 /*TDR: TFIFO 50% empty */ +#define SPI_TXCTL_TDR_75 0x00000040 /*TDR: TFIFO 75% empty */ +#define SPI_TXCTL_TDR_EMPTY 0x00000050 /*TDR: TFIFO empty */ +#define SPI_TXCTL_TDU 0x00000100 /*Transmit Data Under-Run */ +#define SPI_TXCTL_TRWM 0x00003000 /*FIFO Regular Water-Mark */ +#define SPI_TXCTL_RWM_FULL 0x00000000 /*TRWM: TFIFO full */ +#define SPI_TXCTL_RWM_25 0x00001000 /*TRWM: TFIFO 25% empty */ +#define SPI_TXCTL_RWM_50 0x00002000 /*TRWM: TFIFO 50% empty */ +#define SPI_TXCTL_RWM_75 0x00003000 /*TRWM: TFIFO 75% empty */ +#define SPI_TXCTL_TUWM 0x00070000 /*FIFO Urgent Water-Mark */ +#define SPI_TXCTL_UWM_DIS 0x00000000 /*TUWM: Disabled */ +#define SPI_TXCTL_UWM_25 0x00010000 /*TUWM: TFIFO 25% empty */ +#define SPI_TXCTL_UWM_50 0x00020000 /*TUWM: TFIFO 50% empty */ +#define SPI_TXCTL_UWM_75 0x00030000 /*TUWM: TFIFO 75% empty */ +#define SPI_TXCTL_UWM_EMPTY 0x00040000 /*TUWM: TFIFO empty */ +/* SPI_CLOCK */ +#define SPI_CLK_BAUD 0x0000FFFF /*Baud Rate */ +/* SPI_DELAY */ +#define SPI_DLY_STOP 0x000000FF /*Transfer delay time */ +#define SPI_DLY_LEADX 0x00000100 /*Extended (1 SCK) LEAD Control */ +#define SPI_DLY_LAGX 0x00000200 /*Extended (1 SCK) LAG control */ +/* SPI_SSEL */ +#define SPI_SLVSEL_SSE1 0x00000002 /*SPISSEL1 Enable */ +#define SPI_SLVSEL_SSE2 0x00000004 /*SPISSEL2 Enable */ +#define SPI_SLVSEL_SSE3 0x00000008 /*SPISSEL3 Enable */ +#define SPI_SLVSEL_SSE4 0x00000010 /*SPISSEL4 Enable */ +#define SPI_SLVSEL_SSE5 0x00000020 /*SPISSEL5 Enable */ +#define SPI_SLVSEL_SSE6 0x00000040 /*SPISSEL6 Enable */ +#define SPI_SLVSEL_SSE7 0x00000080 /*SPISSEL7 Enable */ +#define SPI_SLVSEL_SSEL1 0x00000200 /*SPISSEL1 Value */ +#define SPI_SLVSEL_SSEL2 0x00000400 /*SPISSEL2 Value */ +#define SPI_SLVSEL_SSEL3 0x00000800 /*SPISSEL3 Value */ +#define SPI_SLVSEL_SSEL4 0x00001000 /*SPISSEL4 Value */ +#define SPI_SLVSEL_SSEL5 0x00002000 /*SPISSEL5 Value */ +#define SPI_SLVSEL_SSEL6 0x00004000 /*SPISSEL6 Value */ +#define SPI_SLVSEL_SSEL7 0x00008000 /*SPISSEL7 Value */ +/* SPI_RWC */ +#define SPI_RWC_VALUE 0x0000FFFF /*Received Word-Count */ +/* SPI_RWCR */ +#define SPI_RWCR_VALUE 0x0000FFFF /*Received Word-Count Reload */ +/* SPI_TWC */ +#define SPI_TWC_VALUE 0x0000FFFF /*Transmitted Word-Count */ +/* SPI_TWCR */ +#define SPI_TWCR_VALUE 0x0000FFFF /*Transmitted Word-Count Reload */ +/* SPI_IMASK */ +#define SPI_IMSK_RUWM 0x00000002 /*Receive Water-Mark Interrupt Mask */ +#define SPI_IMSK_TUWM 0x00000004 /*Transmit Water-Mark Interrupt Mask */ +#define SPI_IMSK_ROM 0x00000010 /*Receive Over-Run Interrupt Mask */ +#define SPI_IMSK_TUM 0x00000020 /*Transmit Under-Run Interrupt Mask */ +#define SPI_IMSK_TCM 0x00000040 /*Transmit Collision Interrupt Mask */ +#define SPI_IMSK_MFM 0x00000080 /*Mode Fault Interrupt Mask */ +#define SPI_IMSK_RSM 0x00000100 /*Receive Start Interrupt Mask */ +#define SPI_IMSK_TSM 0x00000200 /*Transmit Start Interrupt Mask */ +#define SPI_IMSK_RFM 0x00000400 /*Receive Finish Interrupt Mask */ +#define SPI_IMSK_TFM 0x00000800 /*Transmit Finish Interrupt Mask */ +/* SPI_IMASKCL */ +#define SPI_IMSK_CLR_RUW 0x00000002 /*Receive Water-Mark Interrupt Mask */ +#define SPI_IMSK_CLR_TUWM 0x00000004 /*Transmit Water-Mark Interrupt Mask */ +#define SPI_IMSK_CLR_ROM 0x00000010 /*Receive Over-Run Interrupt Mask */ +#define SPI_IMSK_CLR_TUM 0x00000020 /*Transmit Under-Run Interrupt Mask */ +#define SPI_IMSK_CLR_TCM 0x00000040 /*Transmit Collision Interrupt Mask */ +#define SPI_IMSK_CLR_MFM 0x00000080 /*Mode Fault Interrupt Mask */ +#define SPI_IMSK_CLR_RSM 0x00000100 /*Receive Start Interrupt Mask */ +#define SPI_IMSK_CLR_TSM 0x00000200 /*Transmit Start Interrupt Mask */ +#define SPI_IMSK_CLR_RFM 0x00000400 /*Receive Finish Interrupt Mask */ +#define SPI_IMSK_CLR_TFM 0x00000800 /*Transmit Finish Interrupt Mask */ +/* SPI_IMASKST */ +#define SPI_IMSK_SET_RUWM 0x00000002 /*Receive Water-Mark Interrupt Mask */ +#define SPI_IMSK_SET_TUWM 0x00000004 /*Transmit Water-Mark Interrupt Mask */ +#define SPI_IMSK_SET_ROM 0x00000010 /*Receive Over-Run Interrupt Mask */ +#define SPI_IMSK_SET_TUM 0x00000020 /*Transmit Under-Run Interrupt Mask */ +#define SPI_IMSK_SET_TCM 0x00000040 /*Transmit Collision Interrupt Mask */ +#define SPI_IMSK_SET_MFM 0x00000080 /*Mode Fault Interrupt Mask */ +#define SPI_IMSK_SET_RSM 0x00000100 /*Receive Start Interrupt Mask */ +#define SPI_IMSK_SET_TSM 0x00000200 /*Transmit Start Interrupt Mask */ +#define SPI_IMSK_SET_RFM 0x00000400 /*Receive Finish Interrupt Mask */ +#define SPI_IMSK_SET_TFM 0x00000800 /*Transmit Finish Interrupt Mask */ +/* SPI_STATUS */ +#define SPI_STAT_SPIF 0x00000001 /*SPI Finished */ +#define SPI_STAT_RUWM 0x00000002 /*Receive Water-Mark Breached */ +#define SPI_STAT_TUWM 0x00000004 /*Transmit Water-Mark Breached */ +#define SPI_STAT_ROE 0x00000010 /*Receive Over-Run Indication */ +#define SPI_STAT_TUE 0x00000020 /*Transmit Under-Run Indication */ +#define SPI_STAT_TCE 0x00000040 /*Transmit Collision Indication */ +#define SPI_STAT_MODF 0x00000080 /*Mode Fault Indication */ +#define SPI_STAT_RS 0x00000100 /*Receive Start Indication */ +#define SPI_STAT_TS 0x00000200 /*Transmit Start Indication */ +#define SPI_STAT_RF 0x00000400 /*Receive Finish Indication */ +#define SPI_STAT_TF 0x00000800 /*Transmit Finish Indication */ +#define SPI_STAT_RFS 0x00007000 /*SPI_RFIFO status */ +#define SPI_STAT_RFIFO_EMPTY 0x00000000 /*RFS: RFIFO Empty */ +#define SPI_STAT_RFIFO_25 0x00001000 /*RFS: RFIFO 25% Full */ +#define SPI_STAT_RFIFO_50 0x00002000 /*RFS: RFIFO 50% Full */ +#define SPI_STAT_RFIFO_75 0x00003000 /*RFS: RFIFO 75% Full */ +#define SPI_STAT_RFIFO_FULL 0x00004000 /*RFS: RFIFO Full */ +#define SPI_STAT_TFS 0x00070000 /*SPI_TFIFO status */ +#define SPI_STAT_TFIFO_FULL 0x00000000 /*TFS: TFIFO full */ +#define SPI_STAT_TFIFO_25 0x00010000 /*TFS: TFIFO 25% empty */ +#define SPI_STAT_TFIFO_50 0x00020000 /*TFS: TFIFO 50% empty */ +#define SPI_STAT_TFIFO_75 0x00030000 /*TFS: TFIFO 75% empty */ +#define SPI_STAT_TFIFO_EMPTY 0x00040000 /*TFS: TFIFO empty */ +#define SPI_STAT_FCS 0x00100000 /*Flow-Control Stall Indication */ +#define SPI_STAT_RFE 0x00400000 /*SPI_RFIFO Empty */ +#define SPI_STAT_TFF 0x00800000 /*SPI_TFIFO Full */ +/* SPI_ILAT */ +#define SPI_ILAT_RUWMI 0x00000002 /*Receive Water Mark Interrupt */ +#define SPI_ILAT_TUWMI 0x00000004 /*Transmit Water Mark Interrupt */ +#define SPI_ILAT_ROI 0x00000010 /*Receive Over-Run Indication */ +#define SPI_ILAT_TUI 0x00000020 /*Transmit Under-Run Indication */ +#define SPI_ILAT_TCI 0x00000040 /*Transmit Collision Indication */ +#define SPI_ILAT_MFI 0x00000080 /*Mode Fault Indication */ +#define SPI_ILAT_RSI 0x00000100 /*Receive Start Indication */ +#define SPI_ILAT_TSI 0x00000200 /*Transmit Start Indication */ +#define SPI_ILAT_RFI 0x00000400 /*Receive Finish Indication */ +#define SPI_ILAT_TFI 0x00000800 /*Transmit Finish Indication */ +/* SPI_ILATCL */ +#define SPI_ILAT_CLR_RUWMI 0x00000002 /*Receive Water Mark Interrupt */ +#define SPI_ILAT_CLR_TUWMI 0x00000004 /*Transmit Water Mark Interrupt */ +#define SPI_ILAT_CLR_ROI 0x00000010 /*Receive Over-Run Indication */ +#define SPI_ILAT_CLR_TUI 0x00000020 /*Transmit Under-Run Indication */ +#define SPI_ILAT_CLR_TCI 0x00000040 /*Transmit Collision Indication */ +#define SPI_ILAT_CLR_MFI 0x00000080 /*Mode Fault Indication */ +#define SPI_ILAT_CLR_RSI 0x00000100 /*Receive Start Indication */ +#define SPI_ILAT_CLR_TSI 0x00000200 /*Transmit Start Indication */ +#define SPI_ILAT_CLR_RFI 0x00000400 /*Receive Finish Indication */ +#define SPI_ILAT_CLR_TFI 0x00000800 /*Transmit Finish Indication */ + +/* + * bfin spi3 registers layout + */ +struct bfin_spi_regs { + u32 revid; + u32 control; + u32 rx_control; + u32 tx_control; + u32 clock; + u32 delay; + u32 ssel; + u32 rwc; + u32 rwcr; + u32 twc; + u32 twcr; + u32 reserved0; + u32 emask; + u32 emaskcl; + u32 emaskst; + u32 reserved1; + u32 status; + u32 elat; + u32 elatcl; + u32 reserved2; + u32 rfifo; + u32 reserved3; + u32 tfifo; +}; + +#endif /* _SPI_CHANNEL_H_ */ diff --git a/arch/blackfin/include/asm/mach-common/bits/uart4.h b/arch/blackfin/include/asm/mach-common/bits/uart4.h new file mode 100644 index 0000000000..37808de243 --- /dev/null +++ b/arch/blackfin/include/asm/mach-common/bits/uart4.h @@ -0,0 +1,66 @@ +/* + * UART4 Masks + */ + +#ifndef __BFIN_PERIPHERAL_UART4__ +#define __BFIN_PERIPHERAL_UART4__ + +/* UART_CONTROL */ +#define UEN (1 << 0) +#define LOOP_ENA (1 << 1) +#define UMOD (3 << 4) +#define UMOD_UART (0 << 4) +#define UMOD_MDB (1 << 4) +#define UMOD_IRDA (1 << 4) +#define WLS (3 << 8) +#define WLS_5 (0 << 8) +#define WLS_6 (1 << 8) +#define WLS_7 (2 << 8) +#define WLS_8 (3 << 8) +#define STB (1 << 12) +#define STBH (1 << 13) +#define PEN (1 << 14) +#define EPS (1 << 15) +#define STP (1 << 16) +#define FPE (1 << 17) +#define FFE (1 << 18) +#define SB (1 << 19) +#define FCPOL (1 << 22) +#define RPOLC (1 << 23) +#define TPOLC (1 << 24) +#define MRTS (1 << 25) +#define XOFF (1 << 26) +#define ARTS (1 << 27) +#define ACTS (1 << 28) +#define RFIT (1 << 29) +#define RFRT (1 << 30) + +/* UART_STATUS */ +#define DR (1 << 0) +#define OE (1 << 1) +#define PE (1 << 2) +#define FE (1 << 3) +#define BI (1 << 4) +#define THRE (1 << 5) +#define TEMT (1 << 7) +#define TFI (1 << 8) +#define ASTKY (1 << 9) +#define ADDR (1 << 10) +#define RO (1 << 11) +#define SCTS (1 << 12) +#define CTS (1 << 16) +#define RFCS (1 << 17) + +/* UART_EMASK */ +#define ERBFI (1 << 0) +#define ETBEI (1 << 1) +#define ELSI (1 << 2) +#define EDSSI (1 << 3) +#define EDTPTI (1 << 4) +#define ETFI (1 << 5) +#define ERFCI (1 << 6) +#define EAWI (1 << 7) +#define ERXS (1 << 8) +#define ETXS (1 << 9) + +#endif diff --git a/board/pcippc2/fpga_serial.h b/arch/blackfin/include/asm/sections.h index 106fbf7a50..85af42c321 100644 --- a/board/pcippc2/fpga_serial.h +++ b/arch/blackfin/include/asm/sections.h @@ -1,7 +1,5 @@ /* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * + * Copyright (c) 2012 The Chromium OS Authors. * See file CREDITS for list of people who contributed to this * project. * @@ -12,7 +10,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -21,13 +19,9 @@ * MA 02111-1307 USA */ -#ifndef _FPGA_SERIAL_H_ -#define _FPGA_SERIAL_H_ +#ifndef __ASM_BLACKFIN_SECTIONS_H +#define __ASM_BLACKFIN_SECTIONS_H -extern void fpga_serial_init (int); -extern void fpga_serial_putc (char); -extern int fpga_serial_getc (void); -extern int fpga_serial_tstc (void); -extern void fpga_serial_setbrg (void); +#include <asm-generic/sections.h> #endif diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index 9fbbea0d9b..75b6c463d8 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -77,7 +77,7 @@ static void display_global_data(void) bd = gd->bd; printf(" gd: %p\n", gd); printf(" |-flags: %lx\n", gd->flags); - printf(" |-board_type: %lx\n", gd->board_type); + printf(" |-board_type: %lx\n", gd->arch.board_type); printf(" |-baudrate: %u\n", gd->baudrate); printf(" |-have_console: %lx\n", gd->have_console); printf(" |-ram_size: %lx\n", gd->ram_size); @@ -96,6 +96,13 @@ static void display_global_data(void) #define CPLB_PAGE_SIZE (4 * 1024 * 1024) #define CPLB_PAGE_MASK (~(CPLB_PAGE_SIZE - 1)) +#if defined(__ADSPBF60x__) +#define CPLB_EX_PAGE_SIZE (16 * 1024 * 1024) +#define CPLB_EX_PAGE_MASK (~(CPLB_EX_PAGE_SIZE - 1)) +#else +#define CPLB_EX_PAGE_SIZE CPLB_PAGE_SIZE +#define CPLB_EX_PAGE_MASK CPLB_PAGE_MASK +#endif void init_cplbtables(void) { volatile uint32_t *ICPLB_ADDR, *ICPLB_DATA; @@ -127,6 +134,11 @@ void init_cplbtables(void) icplb_add(0xFFA00000, L1_IMEMORY); dcplb_add(0xFF800000, L1_DMEMORY); ++i; +#if defined(__ADSPBF60x__) + icplb_add(0x0, 0x0); + dcplb_add(CONFIG_SYS_FLASH_BASE, SDRAM_EBIU); + ++i; +#endif if (CONFIG_MEM_SIZE) { uint32_t mbase = CONFIG_SYS_MONITOR_BASE; @@ -150,9 +162,11 @@ void init_cplbtables(void) } } +#ifndef __ADSPBF60x__ icplb_add(0x20000000, SDRAM_INON_CHBL); dcplb_add(0x20000000, SDRAM_EBIU); ++i; +#endif /* Add entries for the rest of external RAM up to the bootrom */ extern_memory = 0; @@ -167,10 +181,11 @@ void init_cplbtables(void) ++i; #endif - while (i < 16 && extern_memory < (CONFIG_SYS_MONITOR_BASE & CPLB_PAGE_MASK)) { + while (i < 16 && extern_memory < + (CONFIG_SYS_MONITOR_BASE & CPLB_EX_PAGE_MASK)) { icplb_add(extern_memory, SDRAM_IGENERIC); dcplb_add(extern_memory, SDRAM_DGENERIC); - extern_memory += CPLB_PAGE_SIZE; + extern_memory += CPLB_EX_PAGE_SIZE; ++i; } while (i < 16) { @@ -295,7 +310,13 @@ void board_init_f(ulong bootflag) printf("Clock: VCO: %s MHz, ", strmhz(buf, get_vco())); printf("Core: %s MHz, ", strmhz(buf, get_cclk())); +#if defined(__ADSPBF60x__) + printf("System0: %s MHz, ", strmhz(buf, get_sclk0())); + printf("System1: %s MHz, ", strmhz(buf, get_sclk1())); + printf("Dclk: %s MHz\n", strmhz(buf, get_dclk())); +#else printf("System: %s MHz\n", strmhz(buf, get_sclk())); +#endif if (CONFIG_MEM_SIZE) { printf("RAM: "); diff --git a/arch/blackfin/lib/clocks.c b/arch/blackfin/lib/clocks.c index 0be395bb30..d852f5ebed 100644 --- a/arch/blackfin/lib/clocks.c +++ b/arch/blackfin/lib/clocks.c @@ -9,69 +9,139 @@ #include <common.h> #include <asm/blackfin.h> +#ifdef PLL_CTL +# include <asm/mach-common/bits/pll.h> +# define pll_is_bypassed() (bfin_read_PLL_STAT() & DF) +#else +# include <asm/mach-common/bits/cgu.h> +# define pll_is_bypassed() (bfin_read_CGU_STAT() & PLLBP) +# define bfin_read_PLL_CTL() bfin_read_CGU_CTL() +# define bfin_read_PLL_DIV() bfin_read_CGU_DIV() +#endif + /* Get the voltage input multiplier */ -static u_long cached_vco_pll_ctl, cached_vco; u_long get_vco(void) { - u_long msel; + static u_long cached_vco_pll_ctl, cached_vco; + + u_long msel, pll_ctl; - u_long pll_ctl = bfin_read_PLL_CTL(); + pll_ctl = bfin_read_PLL_CTL(); if (pll_ctl == cached_vco_pll_ctl) return cached_vco; else cached_vco_pll_ctl = pll_ctl; - msel = (pll_ctl >> 9) & 0x3F; + msel = (pll_ctl & MSEL) >> MSEL_P; if (0 == msel) - msel = 64; + msel = (MSEL >> MSEL_P) + 1; cached_vco = CONFIG_CLKIN_HZ; - cached_vco >>= (1 & pll_ctl); /* DF bit */ + cached_vco >>= (pll_ctl & DF); cached_vco *= msel; return cached_vco; } /* Get the Core clock */ -static u_long cached_cclk_pll_div, cached_cclk; u_long get_cclk(void) { - u_long csel, ssel; + static u_long cached_cclk_pll_div, cached_cclk; + u_long div, csel, ssel; - if (bfin_read_PLL_STAT() & 0x1) + if (pll_is_bypassed()) return CONFIG_CLKIN_HZ; - ssel = bfin_read_PLL_DIV(); - if (ssel == cached_cclk_pll_div) + div = bfin_read_PLL_DIV(); + if (div == cached_cclk_pll_div) return cached_cclk; else - cached_cclk_pll_div = ssel; + cached_cclk_pll_div = div; - csel = ((ssel >> 4) & 0x03); - ssel &= 0xf; + csel = (div & CSEL) >> CSEL_P; +#ifndef CGU_DIV + ssel = (div & SSEL) >> SSEL_P; if (ssel && ssel < (1 << csel)) /* SCLK > CCLK */ cached_cclk = get_vco() / ssel; else cached_cclk = get_vco() >> csel; +#else + cached_cclk = get_vco() / csel; +#endif return cached_cclk; } /* Get the System clock */ +#ifdef CGU_DIV + static u_long cached_sclk_pll_div, cached_sclk; +static u_long cached_sclk0, cached_sclk1, cached_dclk; +static u_long _get_sclk(u_long *cache) +{ + u_long div, ssel; + + if (pll_is_bypassed()) + return CONFIG_CLKIN_HZ; + + div = bfin_read_PLL_DIV(); + if (div == cached_sclk_pll_div) + return *cache; + else + cached_sclk_pll_div = div; + + ssel = (div & SYSSEL) >> SYSSEL_P; + cached_sclk = get_vco() / ssel; + + ssel = (div & S0SEL) >> S0SEL_P; + cached_sclk0 = cached_sclk / ssel; + + ssel = (div & S1SEL) >> S1SEL_P; + cached_sclk1 = cached_sclk / ssel; + + ssel = (div & DSEL) >> DSEL_P; + cached_dclk = get_vco() / ssel; + + return *cache; +} + u_long get_sclk(void) { - u_long ssel; + return _get_sclk(&cached_sclk); +} + +u_long get_sclk0(void) +{ + return _get_sclk(&cached_sclk0); +} + +u_long get_sclk1(void) +{ + return _get_sclk(&cached_sclk1); +} + +u_long get_dclk(void) +{ + return _get_sclk(&cached_dclk); +} +#else + +u_long get_sclk(void) +{ + static u_long cached_sclk_pll_div, cached_sclk; + u_long div, ssel; - if (bfin_read_PLL_STAT() & 0x1) + if (pll_is_bypassed()) return CONFIG_CLKIN_HZ; - ssel = bfin_read_PLL_DIV(); - if (ssel == cached_sclk_pll_div) + div = bfin_read_PLL_DIV(); + if (div == cached_sclk_pll_div) return cached_sclk; else - cached_sclk_pll_div = ssel; - - ssel &= 0xf; + cached_sclk_pll_div = div; + ssel = (div & SSEL) >> SSEL_P; cached_sclk = get_vco() / ssel; + return cached_sclk; } + +#endif diff --git a/arch/blackfin/lib/string.c b/arch/blackfin/lib/string.c index e344d3b94b..44d8c6d906 100644 --- a/arch/blackfin/lib/string.c +++ b/arch/blackfin/lib/string.c @@ -29,7 +29,7 @@ #include <config.h> #include <asm/blackfin.h> #include <asm/io.h> -#include <asm/mach-common/bits/dma.h> +#include <asm/dma.h> char *strcpy(char *dest, const char *src) { @@ -117,81 +117,88 @@ int strncmp(const char *cs, const char *ct, size_t count) return __res1; } -#ifdef bfin_write_MDMA1_D0_IRQ_STATUS -# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS -# define bfin_write_MDMA_D0_START_ADDR bfin_write_MDMA1_D0_START_ADDR -# define bfin_write_MDMA_D0_X_COUNT bfin_write_MDMA1_D0_X_COUNT -# define bfin_write_MDMA_D0_X_MODIFY bfin_write_MDMA1_D0_X_MODIFY -# define bfin_write_MDMA_D0_CONFIG bfin_write_MDMA1_D0_CONFIG -# define bfin_write_MDMA_S0_START_ADDR bfin_write_MDMA1_S0_START_ADDR -# define bfin_write_MDMA_S0_X_COUNT bfin_write_MDMA1_S0_X_COUNT -# define bfin_write_MDMA_S0_X_MODIFY bfin_write_MDMA1_S0_X_MODIFY -# define bfin_write_MDMA_S0_CONFIG bfin_write_MDMA1_S0_CONFIG -# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS -# define bfin_read_MDMA_D0_IRQ_STATUS bfin_read_MDMA1_D0_IRQ_STATUS +#ifdef MDMA1_D0_NEXT_DESC_PTR +# define MDMA_D0_NEXT_DESC_PTR MDMA1_D0_NEXT_DESC_PTR +# define MDMA_S0_NEXT_DESC_PTR MDMA1_S0_NEXT_DESC_PTR #endif + +static void dma_calc_size(unsigned long ldst, unsigned long lsrc, size_t count, + unsigned long *dshift, unsigned long *bpos) +{ + unsigned long limit; + +#ifdef MSIZE + limit = 6; + *dshift = MSIZE_P; +#else + limit = 3; + *dshift = WDSIZE_P; +#endif + + *bpos = min(limit, ffs(ldst | lsrc | count)) - 1; +} + /* This version misbehaves for count values of 0 and 2^16+. * Perhaps we should detect that ? Nowhere do we actually * use dma memcpy for those types of lengths though ... */ void dma_memcpy_nocache(void *dst, const void *src, size_t count) { - uint16_t wdsize, mod; + struct dma_register *mdma_d0 = (void *)MDMA_D0_NEXT_DESC_PTR; + struct dma_register *mdma_s0 = (void *)MDMA_S0_NEXT_DESC_PTR; + unsigned long ldst = (unsigned long)dst; + unsigned long lsrc = (unsigned long)src; + unsigned long dshift, bpos; + uint32_t dsize, mod; /* Disable DMA in case it's still running (older u-boot's did not * always turn them off). Do it before the if statement below so * we can be cheap and not do a SSYNC() due to the forced abort. */ - bfin_write_MDMA_D0_CONFIG(0); - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR); + bfin_write(&mdma_d0->config, 0); + bfin_write(&mdma_s0->config, 0); + bfin_write(&mdma_d0->status, DMA_RUN | DMA_DONE | DMA_ERR); /* Scratchpad cannot be a DMA source or destination */ - if (((unsigned long)src >= L1_SRAM_SCRATCH && - (unsigned long)src < L1_SRAM_SCRATCH_END) || - ((unsigned long)dst >= L1_SRAM_SCRATCH && - (unsigned long)dst < L1_SRAM_SCRATCH_END)) + if ((lsrc >= L1_SRAM_SCRATCH && lsrc < L1_SRAM_SCRATCH_END) || + (ldst >= L1_SRAM_SCRATCH && ldst < L1_SRAM_SCRATCH_END)) hang(); - if (((unsigned long)dst | (unsigned long)src | count) & 0x1) { - wdsize = WDSIZE_8; - mod = 1; - } else if (((unsigned long)dst | (unsigned long)src | count) & 0x2) { - wdsize = WDSIZE_16; - count >>= 1; - mod = 2; - } else { - wdsize = WDSIZE_32; - count >>= 2; - mod = 4; - } + dma_calc_size(ldst, lsrc, count, &dshift, &bpos); + dsize = bpos << dshift; + count >>= bpos; + mod = 1 << bpos; + +#ifdef PSIZE + dsize |= min(3, bpos) << PSIZE_P; +#endif /* Copy sram functions from sdram to sram */ /* Setup destination start address */ - bfin_write_MDMA_D0_START_ADDR(dst); + bfin_write(&mdma_d0->start_addr, ldst); /* Setup destination xcount */ - bfin_write_MDMA_D0_X_COUNT(count); + bfin_write(&mdma_d0->x_count, count); /* Setup destination xmodify */ - bfin_write_MDMA_D0_X_MODIFY(mod); + bfin_write(&mdma_d0->x_modify, mod); /* Setup Source start address */ - bfin_write_MDMA_S0_START_ADDR(src); + bfin_write(&mdma_s0->start_addr, lsrc); /* Setup Source xcount */ - bfin_write_MDMA_S0_X_COUNT(count); + bfin_write(&mdma_s0->x_count, count); /* Setup Source xmodify */ - bfin_write_MDMA_S0_X_MODIFY(mod); + bfin_write(&mdma_s0->x_modify, mod); /* Enable source DMA */ - bfin_write_MDMA_S0_CONFIG(wdsize | DMAEN); - bfin_write_MDMA_D0_CONFIG(wdsize | DMAEN | WNR | DI_EN); + bfin_write(&mdma_s0->config, dsize | DMAEN); + bfin_write(&mdma_d0->config, dsize | DMAEN | WNR | DI_EN); SSYNC(); - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) + while (!(bfin_read(&mdma_d0->status) & DMA_DONE)) continue; - bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR); - bfin_write_MDMA_D0_CONFIG(0); - bfin_write_MDMA_S0_CONFIG(0); + bfin_write(&mdma_d0->status, DMA_RUN | DMA_DONE | DMA_ERR); + bfin_write(&mdma_d0->config, 0); + bfin_write(&mdma_s0->config, 0); } /* We should do a dcache invalidate on the destination after the dma, but since * we lack such hardware capability, we'll flush/invalidate the destination diff --git a/arch/arm/cpu/armv7/mx6/lowlevel_init.S b/arch/m68k/include/asm/sections.h index 7b60ca7454..92289878e1 100644 --- a/arch/arm/cpu/armv7/mx6/lowlevel_init.S +++ b/arch/m68k/include/asm/sections.h @@ -1,5 +1,7 @@ /* - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. + * Copyright (c) 2012 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -16,20 +18,10 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ -.section ".text.init", "x" -#include <linux/linkage.h> +#ifndef __ASM_M68K_SECTIONS_H +#define __ASM_M68K_SECTIONS_H -.macro init_arm_errata - /* ARM erratum ID #743622 */ - mrc p15, 0, r10, c15, c0, 1 /* read diagnostic register */ - orr r10, r10, #1 << 6 /* set bit #6 */ - /* ARM erratum ID #751472 */ - orr r10, r10, #1 << 11 /* set bit #11 */ - mcr p15, 0, r10, c15, c0, 1 /* write diagnostic register */ -.endm +#include <asm-generic/sections.h> -ENTRY(lowlevel_init) - init_arm_errata - mov pc, lr -ENDPROC(lowlevel_init) +#endif diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index c372ae228b..adaccfe69e 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -77,9 +77,10 @@ static char *failed = "*** failed ***\n"; #include <environment.h> extern ulong __init_end; -extern ulong __bss_end__; +extern ulong __bss_end; #if defined(CONFIG_WATCHDOG) +# undef INIT_FUNC_WATCHDOG_INIT # define INIT_FUNC_WATCHDOG_INIT watchdog_init, # define WATCHDOG_DISABLE watchdog_disable @@ -244,7 +245,7 @@ board_init_f (ulong bootflag) * - monitor code * - board info struct */ - len = (ulong)&__bss_end__ - CONFIG_SYS_MONITOR_BASE; + len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE; addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size; @@ -449,7 +450,6 @@ void board_init_r (gd_t *id, ulong dest_addr) /* The Malloc area is immediately below the monitor copy in DRAM */ mem_malloc_init (CONFIG_SYS_MONITOR_BASE + gd->reloc_off - TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN); - malloc_bin_reloc (); #if !defined(CONFIG_SYS_NO_FLASH) puts ("Flash: "); diff --git a/arch/microblaze/cpu/u-boot.lds b/arch/microblaze/cpu/u-boot.lds index fe3d97dad8..1ae4184fb0 100644 --- a/arch/microblaze/cpu/u-boot.lds +++ b/arch/microblaze/cpu/u-boot.lds @@ -54,7 +54,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .bss ALIGN(0x4): diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h new file mode 100644 index 0000000000..156c149159 --- /dev/null +++ b/arch/microblaze/include/asm/sections.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_MICROBLAZE_SECTIONS_H +#define __ASM_MICROBLAZE_SECTIONS_H + +#include <asm-generic/sections.h> + +#endif diff --git a/arch/mips/cpu/u-boot.lds b/arch/mips/cpu/u-boot.lds index 10513abd2c..ca18d463e9 100644 --- a/arch/mips/cpu/u-boot.lds +++ b/arch/mips/cpu/u-boot.lds @@ -64,7 +64,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); diff --git a/arch/mips/include/asm/sections.h b/arch/mips/include/asm/sections.h new file mode 100644 index 0000000000..54cd8b362b --- /dev/null +++ b/arch/mips/include/asm/sections.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_MIPS_SECTIONS_H +#define __ASM_MIPS_SECTIONS_H + +#include <asm-generic/sections.h> + +#endif diff --git a/arch/mips/include/asm/u-boot-mips.h b/arch/mips/include/asm/u-boot-mips.h index a483166a9c..e77636eaaf 100644 --- a/arch/mips/include/asm/u-boot-mips.h +++ b/arch/mips/include/asm/u-boot-mips.h @@ -7,7 +7,7 @@ static inline unsigned long bss_start(void) { - extern ulong __bss_start; + extern char __bss_start[]; return (unsigned long) &__bss_start; } @@ -19,7 +19,7 @@ static inline unsigned long bss_end(void) static inline unsigned long image_copy_end(void) { - extern ulong __image_copy_end; + extern char __image_copy_end[]; return (unsigned long) &__image_copy_end; } diff --git a/arch/nds32/cpu/n1213/start.S b/arch/nds32/cpu/n1213/start.S index 889bf8b871..558fd0ee6c 100644 --- a/arch/nds32/cpu/n1213/start.S +++ b/arch/nds32/cpu/n1213/start.S @@ -240,7 +240,7 @@ fix_got_loop: clear_bss: la $r0, __bss_start /* r0 <- rel __bss_start in FLASH */ add $r0, $r0, $r9 /* r0 <- rel __bss_start in FLASH */ - la $r1, __bss_end__ /* r1 <- rel __bss_end in RAM */ + la $r1, __bss_end /* r1 <- rel __bss_end in RAM */ add $r1, $r1, $r9 /* r0 <- rel __bss_end in RAM */ li $r2, 0x00000000 /* clear */ diff --git a/arch/nds32/cpu/n1213/u-boot.lds b/arch/nds32/cpu/n1213/u-boot.lds index cef19c51ee..e9fbcd3804 100644 --- a/arch/nds32/cpu/n1213/u-boot.lds +++ b/arch/nds32/cpu/n1213/u-boot.lds @@ -55,7 +55,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); @@ -66,7 +66,7 @@ SECTIONS __bss_start = .; *(.bss) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } } diff --git a/arch/nds32/include/asm/errno.h b/arch/nds32/include/asm/errno.h new file mode 100644 index 0000000000..4c82b503d9 --- /dev/null +++ b/arch/nds32/include/asm/errno.h @@ -0,0 +1 @@ +#include <asm-generic/errno.h> diff --git a/arch/nds32/include/asm/sections.h b/arch/nds32/include/asm/sections.h new file mode 100644 index 0000000000..a65735e426 --- /dev/null +++ b/arch/nds32/include/asm/sections.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_NDS32_SECTIONS_H +#define __ASM_NDS32_SECTIONS_H + +#include <asm-generic/sections.h> + +#endif diff --git a/arch/nds32/include/asm/u-boot-nds32.h b/arch/nds32/include/asm/u-boot-nds32.h index ae1918d5d4..f3c7b271e9 100644 --- a/arch/nds32/include/asm/u-boot-nds32.h +++ b/arch/nds32/include/asm/u-boot-nds32.h @@ -30,10 +30,10 @@ #define _U_BOOT_NDS32_H_ 1 /* for the following variables, see start.S */ -extern ulong __bss_start; /* BSS start relative to _start */ -extern ulong __bss_end__; /* BSS end relative to _start */ -extern ulong _end; /* end of image relative to _start */ -extern ulong _start; /* start of image relative to _start */ +extern char __bss_start[]; /* BSS start relative to _start */ +extern ulong __bss_end; /* BSS end relative to _start */ +extern char _end[]; /* end of image relative to _start */ +extern void _start(void); /* start of image relative to _start */ extern ulong _TEXT_BASE; /* code start */ extern ulong IRQ_STACK_START; /* top of IRQ stack */ extern ulong FIQ_STACK_START; /* top of FIQ stack */ diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c index 09feaf3733..a7d27fc7f8 100644 --- a/arch/nds32/lib/board.c +++ b/arch/nds32/lib/board.c @@ -192,7 +192,7 @@ void board_init_f(ulong bootflag) memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE); - gd->mon_len = (unsigned int)(&__bss_end__) - (unsigned int)(&_start); + gd->mon_len = (unsigned int)(&__bss_end) - (unsigned int)(&_start); for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { if ((*init_fnc_ptr)() != 0) @@ -320,7 +320,6 @@ void board_init_r(gd_t *id, ulong dest_addr) /* The Malloc area is immediately below the monitor copy in DRAM */ malloc_start = dest_addr - TOTAL_MALLOC_LEN; mem_malloc_init(malloc_start, TOTAL_MALLOC_LEN); - malloc_bin_reloc(); #ifndef CONFIG_SYS_NO_FLASH /* configure available FLASH banks */ diff --git a/arch/nios2/cpu/start.S b/arch/nios2/cpu/start.S index 0f4ab286b9..1787b65874 100644 --- a/arch/nios2/cpu/start.S +++ b/arch/nios2/cpu/start.S @@ -99,12 +99,12 @@ _cur: movhi r5, %hi(_cur - _start) 3: /* ZERO BSS/SBSS -- bss and sbss are assumed to be adjacent - * and between __bss_start and __bss_end__. + * and between __bss_start and __bss_end. */ movhi r5, %hi(__bss_start) ori r5, r5, %lo(__bss_start) - movhi r6, %hi(__bss_end__) - ori r6, r6, %lo(__bss_end__) + movhi r6, %hi(__bss_end) + ori r6, r6, %lo(__bss_end) beq r5, r6, 5f 4: stwio r0, 0(r5) diff --git a/arch/nios2/cpu/u-boot.lds b/arch/nios2/cpu/u-boot.lds index d0eb80de0e..4c45336d4a 100644 --- a/arch/nios2/cpu/u-boot.lds +++ b/arch/nios2/cpu/u-boot.lds @@ -48,7 +48,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } /* INIT DATA sections - "Small" data (see the gcc -G option) @@ -101,7 +101,7 @@ SECTIONS *(.scommon) } . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; PROVIDE (end = .); /* DEBUG -- symbol table, string table, etc. etc. diff --git a/arch/nios2/include/asm/sections.h b/arch/nios2/include/asm/sections.h new file mode 100644 index 0000000000..d8135630b7 --- /dev/null +++ b/arch/nios2/include/asm/sections.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_NIOS2_SECTIONS_H +#define __ASM_NIOS2_SECTIONS_H + +#include <asm-generic/sections.h> + +#endif diff --git a/arch/openrisc/include/asm/sections.h b/arch/openrisc/include/asm/sections.h new file mode 100644 index 0000000000..6eb5a664b3 --- /dev/null +++ b/arch/openrisc/include/asm/sections.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_OPENRISC_SECTIONS_H +#define __ASM_OPENRISC_SECTIONS_H + +#include <asm-generic/sections.h> + +#endif diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk index b7062818bb..e32d2bf409 100644 --- a/arch/powerpc/config.mk +++ b/arch/powerpc/config.mk @@ -29,6 +29,9 @@ PLATFORM_RELFLAGS += -fpic -mrelocatable -ffunction-sections -fdata-sections PLATFORM_CPPFLAGS += -DCONFIG_PPC -D__powerpc__ PLATFORM_LDFLAGS += -n +# Support generic board on PPC +__HAVE_ARCH_GENERIC_BOARD := y + # # When cross-compiling on NetBSD, we have to define __PPC__ or else we # will pick up a va_list declaration that is incompatible with the diff --git a/arch/powerpc/cpu/74xx_7xx/cpu.c b/arch/powerpc/cpu/74xx_7xx/cpu.c index b6a31b4372..17694a1cfe 100644 --- a/arch/powerpc/cpu/74xx_7xx/cpu.c +++ b/arch/powerpc/cpu/74xx_7xx/cpu.c @@ -229,8 +229,7 @@ soft_restart(unsigned long addr) } -#if !defined(CONFIG_PCIPPC2) && \ - !defined(CONFIG_BAB7xx) && \ +#if !defined(CONFIG_BAB7xx) && \ !defined(CONFIG_ELPPC) && \ !defined(CONFIG_PPMC7XX) /* no generic way to do board reset. simply call soft_reset. */ @@ -288,13 +287,13 @@ unsigned long get_tbclk(void) /* ------------------------------------------------------------------------- */ #if defined(CONFIG_WATCHDOG) -#if !defined(CONFIG_PCIPPC2) && !defined(CONFIG_BAB7xx) +#if !defined(CONFIG_BAB7xx) void watchdog_reset(void) { } -#endif /* !CONFIG_PCIPPC2 && !CONFIG_BAB7xx */ +#endif /* !CONFIG_BAB7xx */ #endif /* CONFIG_WATCHDOG */ /* ------------------------------------------------------------------------- */ diff --git a/arch/powerpc/cpu/74xx_7xx/start.S b/arch/powerpc/cpu/74xx_7xx/start.S index 75fb773894..cd8dea841f 100644 --- a/arch/powerpc/cpu/74xx_7xx/start.S +++ b/arch/powerpc/cpu/74xx_7xx/start.S @@ -72,7 +72,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end__) + GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) END_GOT @@ -715,7 +715,7 @@ in_ram: * Now clear BSS segment */ lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end__) + lwz r4,GOT(__bss_end) cmplw 0, r3, r4 beq 6f diff --git a/arch/powerpc/cpu/74xx_7xx/u-boot.lds b/arch/powerpc/cpu/74xx_7xx/u-boot.lds index ecee439579..40b89abac6 100644 --- a/arch/powerpc/cpu/74xx_7xx/u-boot.lds +++ b/arch/powerpc/cpu/74xx_7xx/u-boot.lds @@ -65,7 +65,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -89,6 +89,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/arch/powerpc/cpu/mpc512x/cpu_init.c b/arch/powerpc/cpu/mpc512x/cpu_init.c index 32ade1b0b9..b308cb4be3 100644 --- a/arch/powerpc/cpu/mpc512x/cpu_init.c +++ b/arch/powerpc/cpu/mpc512x/cpu_init.c @@ -26,6 +26,7 @@ #include <common.h> #include <asm/io.h> +#include <asm/mpc512x.h> #include <asm/processor.h> DECLARE_GLOBAL_DATA_PTR; @@ -43,6 +44,101 @@ void cpu_init_f (volatile immap_t * im) /* Clear initial global data */ memset ((void *) gd, 0, sizeof (gd_t)); + /* Local Window and chip select configuration */ +#if defined(CONFIG_SYS_CS0_START) && defined(CONFIG_SYS_CS0_SIZE) + out_be32(&im->sysconf.lpcs0aw, + CSAW_START(CONFIG_SYS_CS0_START) | + CSAW_STOP(CONFIG_SYS_CS0_START, CONFIG_SYS_CS0_SIZE)); + sync_law(&im->sysconf.lpcs0aw); +#endif +#if defined(CONFIG_SYS_CS0_CFG) + out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG); +#endif + +#if defined(CONFIG_SYS_CS1_START) && defined(CONFIG_SYS_CS1_SIZE) + out_be32(&im->sysconf.lpcs1aw, + CSAW_START(CONFIG_SYS_CS1_START) | + CSAW_STOP(CONFIG_SYS_CS1_START, CONFIG_SYS_CS1_SIZE)); + sync_law(&im->sysconf.lpcs1aw); +#endif +#if defined(CONFIG_SYS_CS1_CFG) + out_be32(&im->lpc.cs_cfg[1], CONFIG_SYS_CS1_CFG); +#endif + +#if defined(CONFIG_SYS_CS2_START) && (defined CONFIG_SYS_CS2_SIZE) + out_be32(&im->sysconf.lpcs2aw, + CSAW_START(CONFIG_SYS_CS2_START) | + CSAW_STOP(CONFIG_SYS_CS2_START, CONFIG_SYS_CS2_SIZE)); + sync_law(&im->sysconf.lpcs2aw); +#endif +#if defined(CONFIG_SYS_CS2_CFG) + out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG); +#endif + +#if defined(CONFIG_SYS_CS3_START) && defined(CONFIG_SYS_CS3_SIZE) + out_be32(&im->sysconf.lpcs3aw, + CSAW_START(CONFIG_SYS_CS3_START) | + CSAW_STOP(CONFIG_SYS_CS3_START, CONFIG_SYS_CS3_SIZE)); + sync_law(&im->sysconf.lpcs3aw); +#endif +#if defined(CONFIG_SYS_CS3_CFG) + out_be32(&im->lpc.cs_cfg[3], CONFIG_SYS_CS3_CFG); +#endif + +#if defined(CONFIG_SYS_CS4_START) && defined(CONFIG_SYS_CS4_SIZE) + out_be32(&im->sysconf.lpcs4aw, + CSAW_START(CONFIG_SYS_CS4_START) | + CSAW_STOP(CONFIG_SYS_CS4_START, CONFIG_SYS_CS4_SIZE)); + sync_law(&im->sysconf.lpcs4aw); +#endif +#if defined(CONFIG_SYS_CS4_CFG) + out_be32(&im->lpc.cs_cfg[4], CONFIG_SYS_CS4_CFG); +#endif + +#if defined(CONFIG_SYS_CS5_START) && defined(CONFIG_SYS_CS5_SIZE) + out_be32(&im->sysconf.lpcs5aw, + CSAW_START(CONFIG_SYS_CS5_START) | + CSAW_STOP(CONFIG_SYS_CS5_START, CONFIG_SYS_CS5_SIZE)); + sync_law(&im->sysconf.lpcs5aw); +#endif +#if defined(CONFIG_SYS_CS5_CFG) + out_be32(&im->lpc.cs_cfg[5], CONFIG_SYS_CS5_CFG); +#endif + +#if defined(CONFIG_SYS_CS6_START) && defined(CONFIG_SYS_CS6_SIZE) + out_be32(&im->sysconf.lpcs6aw, + CSAW_START(CONFIG_SYS_CS6_START) | + CSAW_STOP(CONFIG_SYS_CS6_START, CONFIG_SYS_CS6_SIZE)); + sync_law(&im->sysconf.lpcs6aw); +#endif +#if defined(CONFIG_SYS_CS6_CFG) + out_be32(&im->lpc.cs_cfg[6], CONFIG_SYS_CS6_CFG); +#endif + +#if defined(CONFIG_SYS_CS7_START) && defined(CONFIG_SYS_CS7_SIZE) + out_be32(&im->sysconf.lpcs7aw, + CSAW_START(CONFIG_SYS_CS7_START) | + CSAW_STOP(CONFIG_SYS_CS7_START, CONFIG_SYS_CS7_SIZE)); + sync_law(&im->sysconf.lpcs7aw); +#endif +#if defined(CONFIG_SYS_CS7_CFG) + out_be32(&im->lpc.cs_cfg[7], CONFIG_SYS_CS7_CFG); +#endif + +#if defined CONFIG_SYS_CS_ALETIMING + if (SVR_MJREV(in_be32(&im->sysconf.spridr)) >= 2) + out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING); +#endif +#if defined CONFIG_SYS_CS_BURST + out_be32(&im->lpc.cs_bcr, CONFIG_SYS_CS_BURST); +#endif +#if defined CONFIG_SYS_CS_DEADCYCLE + out_be32(&im->lpc.cs_dccr, CONFIG_SYS_CS_DEADCYCLE); +#endif +#if defined CONFIG_SYS_CS_HOLDCYCLE + out_be32(&im->lpc.cs_hccr, CONFIG_SYS_CS_HOLDCYCLE); +#endif + /* system performance tweaking */ #ifdef CONFIG_SYS_ACR_PIPE_DEP @@ -76,6 +172,21 @@ void cpu_init_f (volatile immap_t * im) ips_div |= SCFR1_IPS_DIV << SCFR1_IPS_DIV_SHIFT; out_be32(&im->clk.scfr[0], ips_div); +#ifdef SCFR1_LPC_DIV + clrsetbits_be32(&im->clk.scfr[0], SCFR1_LPC_DIV_MASK, + SCFR1_LPC_DIV << SCFR1_LPC_DIV_SHIFT); +#endif + +#ifdef SCFR1_NFC_DIV + clrsetbits_be32(&im->clk.scfr[0], SCFR1_NFC_DIV_MASK, + SCFR1_NFC_DIV << SCFR1_NFC_DIV_SHIFT); +#endif + +#ifdef SCFR1_DIU_DIV + clrsetbits_be32(&im->clk.scfr[0], SCFR1_DIU_DIV_MASK, + SCFR1_DIU_DIV << SCFR1_DIU_DIV_SHIFT); +#endif + /* * Enable Time Base/Decrementer * @@ -84,6 +195,15 @@ void cpu_init_f (volatile immap_t * im) * during FLASH chip identification etc. */ setbits_be32(&im->sysconf.spcr, SPCR_TBEN); + + /* + * Enable clocks + */ + out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN); + out_be32(&im->clk.sccr[1], SCCR2_CLOCKS_EN); +#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE) + setbits_be32(&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN); +#endif } int cpu_init_r (void) diff --git a/arch/powerpc/cpu/mpc512x/fixed_sdram.c b/arch/powerpc/cpu/mpc512x/fixed_sdram.c index 550cbd0bd6..6635fb036e 100644 --- a/arch/powerpc/cpu/mpc512x/fixed_sdram.c +++ b/arch/powerpc/cpu/mpc512x/fixed_sdram.c @@ -99,7 +99,19 @@ long int fixed_sdram(ddr512x_config_t *mddrc_config, sync_law(&im->sysconf.ddrlaw.ar); /* DDR Enable */ - out_be32(&im->mddrc.ddr_sys_config, MDDRC_SYS_CFG_EN); + /* + * the "enable" combination: DRAM controller out of reset, + * clock enabled, command mode -- BUT leave CKE low for now + */ + i = MDDRC_SYS_CFG_EN & ~MDDRC_SYS_CFG_CKE_MASK; + out_be32(&im->mddrc.ddr_sys_config, i); + /* maintain 200 microseconds of stable power and clock */ + udelay(200); + /* apply a NOP, it shouldn't harm */ + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_DDRCMD_NOP); + /* now assert CKE (high) */ + i |= MDDRC_SYS_CFG_CKE_MASK; + out_be32(&im->mddrc.ddr_sys_config, i); /* Initialize DDR Priority Manager */ out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1); @@ -148,6 +160,9 @@ long int fixed_sdram(ddr512x_config_t *mddrc_config, out_be32(&im->mddrc.ddr_time_config0, mddrc_config->ddr_time_config0); out_be32(&im->mddrc.ddr_sys_config, mddrc_config->ddr_sys_config); + /* Allow for the DLL to startup before accessing data */ + udelay(10); + msize = get_ram_size(CONFIG_SYS_DDR_BASE, CONFIG_SYS_MAX_RAM_SIZE); /* Fix DDR Local Window for new size */ out_be32(&im->sysconf.ddrlaw.ar, __ilog2(msize) - 1); diff --git a/arch/powerpc/cpu/mpc512x/iopin.c b/arch/powerpc/cpu/mpc512x/iopin.c index be20947623..1a39101622 100644 --- a/arch/powerpc/cpu/mpc512x/iopin.c +++ b/arch/powerpc/cpu/mpc512x/iopin.c @@ -47,3 +47,57 @@ void iopin_initialize(iopin_t *ioregs_init, int len) } return; } + +void iopin_initialize_bits(iopin_t *ioregs_init, int len) +{ + short i, j, p; + u32 *reg, mask; + immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + + reg = (u32 *)&(im->io_ctrl); + + /* iterate over table entries */ + for (i = 0; i < len; i++) { + /* iterate over pins within a table entry */ + for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long); + p < ioregs_init[i].nr_pins; p++, j++) { + if (ioregs_init[i].bit_or & IO_PIN_OVER_EACH) { + /* replace all settings at once */ + out_be32(reg + j, ioregs_init[i].val); + } else { + /* + * only replace individual parts, but + * REPLACE them instead of just ORing + * them in and "inheriting" previously + * set bits which we don't want + */ + mask = 0; + if (ioregs_init[i].bit_or & IO_PIN_OVER_FMUX) + mask |= IO_PIN_FMUX(3); + + if (ioregs_init[i].bit_or & IO_PIN_OVER_HOLD) + mask |= IO_PIN_HOLD(3); + + if (ioregs_init[i].bit_or & IO_PIN_OVER_PULL) + mask |= IO_PIN_PUD(1) | IO_PIN_PUE(1); + + if (ioregs_init[i].bit_or & IO_PIN_OVER_STRIG) + mask |= IO_PIN_ST(1); + + if (ioregs_init[i].bit_or & IO_PIN_OVER_DRVSTR) + mask |= IO_PIN_DS(3); + /* + * DON'T do the "mask, then insert" + * in place on the register, it may + * break access to external hardware + * (like boot ROMs) when configuring + * LPB related pins, while the code to + * configure the pin is read from this + * very address region + */ + clrsetbits_be32(reg + j, mask, + ioregs_init[i].val & mask); + } + } + } +} diff --git a/arch/powerpc/cpu/mpc512x/start.S b/arch/powerpc/cpu/mpc512x/start.S index ed362d87aa..6d1a99ac5c 100644 --- a/arch/powerpc/cpu/mpc512x/start.S +++ b/arch/powerpc/cpu/mpc512x/start.S @@ -77,7 +77,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end__) + GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) END_GOT @@ -622,7 +622,7 @@ clear_bss: * Now clear BSS segment */ lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end__) + lwz r4,GOT(__bss_end) cmplw 0, r3, r4 beq 6f diff --git a/arch/powerpc/cpu/mpc512x/u-boot.lds b/arch/powerpc/cpu/mpc512x/u-boot.lds index 7faefba555..0d8697901f 100644 --- a/arch/powerpc/cpu/mpc512x/u-boot.lds +++ b/arch/powerpc/cpu/mpc512x/u-boot.lds @@ -60,7 +60,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -84,7 +84,7 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } ENTRY(_start) diff --git a/arch/powerpc/cpu/mpc5xx/start.S b/arch/powerpc/cpu/mpc5xx/start.S index cc4c33ebbd..1b275c66a1 100644 --- a/arch/powerpc/cpu/mpc5xx/start.S +++ b/arch/powerpc/cpu/mpc5xx/start.S @@ -65,7 +65,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end__) + GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) END_GOT @@ -459,7 +459,7 @@ clear_bss: * Now clear BSS segment */ lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end__) + lwz r4,GOT(__bss_end) cmplw 0, r3, r4 beq 6f diff --git a/arch/powerpc/cpu/mpc5xx/u-boot.lds b/arch/powerpc/cpu/mpc5xx/u-boot.lds index c91e146d26..8385a29bcb 100644 --- a/arch/powerpc/cpu/mpc5xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc5xx/u-boot.lds @@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,7 +93,7 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); . = env_start; .ppcenv : diff --git a/arch/powerpc/cpu/mpc5xxx/spl_boot.c b/arch/powerpc/cpu/mpc5xxx/spl_boot.c index 9f14127dca..35611cce77 100644 --- a/arch/powerpc/cpu/mpc5xxx/spl_boot.c +++ b/arch/powerpc/cpu/mpc5xxx/spl_boot.c @@ -41,13 +41,12 @@ void board_init_f(ulong bootflag) end_align = (u32)__spl_flash_end; /* - * First we need to initialize the SDRAM, so that the real - * U-Boot or the OS (Linux) can be loaded + * On MPC5200, the initial RAM (and gd) is located in the internal + * SRAM. So we can actually call the preloader console init code + * before calling initdram(). This makes serial output (printf) + * available very early, even before SDRAM init, which has been + * an U-Boot priciple from day 1. */ - initdram(0); - - /* Clear bss */ - memset(__bss_start, '\0', __bss_end__ - __bss_start); /* * Init global_data pointer. Has to be done before calling @@ -71,6 +70,15 @@ void board_init_f(ulong bootflag) preloader_console_init(); /* + * First we need to initialize the SDRAM, so that the real + * U-Boot or the OS (Linux) can be loaded + */ + initdram(0); + + /* Clear bss */ + memset(__bss_start, '\0', __bss_end - __bss_start); + + /* * Call board_init_r() (SPL framework version) to load and boot * real U-Boot or OS */ diff --git a/arch/powerpc/cpu/mpc5xxx/start.S b/arch/powerpc/cpu/mpc5xxx/start.S index ad5bc0a179..2b6a800dea 100644 --- a/arch/powerpc/cpu/mpc5xxx/start.S +++ b/arch/powerpc/cpu/mpc5xxx/start.S @@ -66,7 +66,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end__) + GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) END_GOT #endif @@ -694,7 +694,7 @@ clear_bss: * Now clear BSS segment */ lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end__) + lwz r4,GOT(__bss_end) cmplw 0, r3, r4 beq 6f diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds b/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds index ac7844dcf4..590952fd15 100644 --- a/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds +++ b/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds @@ -68,7 +68,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -91,6 +91,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds b/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds index cab9b9265c..0500739617 100644 --- a/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds +++ b/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds @@ -52,6 +52,6 @@ SECTIONS __bss_start = .; *(.bss*) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } > sdram } diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot.lds b/arch/powerpc/cpu/mpc5xxx/u-boot.lds index 1f46eadb5d..06ece78361 100644 --- a/arch/powerpc/cpu/mpc5xxx/u-boot.lds +++ b/arch/powerpc/cpu/mpc5xxx/u-boot.lds @@ -63,7 +63,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -87,6 +87,6 @@ SECTIONS *(.sbss*) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/arch/powerpc/cpu/mpc8220/start.S b/arch/powerpc/cpu/mpc8220/start.S index a1a2dc5acd..6295631913 100644 --- a/arch/powerpc/cpu/mpc8220/start.S +++ b/arch/powerpc/cpu/mpc8220/start.S @@ -64,7 +64,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end__) + GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) END_GOT @@ -647,7 +647,7 @@ clear_bss: * Now clear BSS segment */ lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end__) + lwz r4,GOT(__bss_end) cmplw 0, r3, r4 beq 6f diff --git a/arch/powerpc/cpu/mpc8220/u-boot.lds b/arch/powerpc/cpu/mpc8220/u-boot.lds index c1479544f9..dc63d2081b 100644 --- a/arch/powerpc/cpu/mpc8220/u-boot.lds +++ b/arch/powerpc/cpu/mpc8220/u-boot.lds @@ -62,7 +62,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -86,6 +86,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/arch/powerpc/cpu/mpc824x/start.S b/arch/powerpc/cpu/mpc824x/start.S index 076df70a9f..0b9d898285 100644 --- a/arch/powerpc/cpu/mpc824x/start.S +++ b/arch/powerpc/cpu/mpc824x/start.S @@ -72,7 +72,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end__) + GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) #if defined(CONFIG_FADS) GOT_ENTRY(environment) @@ -584,7 +584,7 @@ clear_bss: * Now clear BSS segment */ lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end__) + lwz r4,GOT(__bss_end) cmplw 0, r3, r4 beq 6f diff --git a/arch/powerpc/cpu/mpc824x/u-boot.lds b/arch/powerpc/cpu/mpc824x/u-boot.lds index a7130125c7..4590fab338 100644 --- a/arch/powerpc/cpu/mpc824x/u-boot.lds +++ b/arch/powerpc/cpu/mpc824x/u-boot.lds @@ -63,7 +63,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -87,6 +87,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S index 3299d7292a..bd8d7ac53d 100644 --- a/arch/powerpc/cpu/mpc8260/start.S +++ b/arch/powerpc/cpu/mpc8260/start.S @@ -65,7 +65,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end__) + GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) #if defined(CONFIG_HYMOD) GOT_ENTRY(environment) @@ -920,7 +920,7 @@ clear_bss: */ lwz r4,GOT(environment) #else - lwz r4,GOT(__bss_end__) + lwz r4,GOT(__bss_end) #endif cmplw 0, r3, r4 diff --git a/arch/powerpc/cpu/mpc8260/u-boot.lds b/arch/powerpc/cpu/mpc8260/u-boot.lds index 42385fcc19..eb1c611f90 100644 --- a/arch/powerpc/cpu/mpc8260/u-boot.lds +++ b/arch/powerpc/cpu/mpc8260/u-boot.lds @@ -62,7 +62,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -86,6 +86,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index 44a64b7acd..1bfc971412 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -76,7 +76,7 @@ START_GOT GOT_ENTRY(_GOT2_TABLE_) GOT_ENTRY(__bss_start) - GOT_ENTRY(__bss_end__) + GOT_ENTRY(__bss_end) #ifndef MINIMAL_SPL GOT_ENTRY(_FIXUP_TABLE_) @@ -980,7 +980,7 @@ clear_bss: */ lwz r4,GOT(environment) #else - lwz r4,GOT(__bss_end__) + lwz r4,GOT(__bss_end) #endif cmplw 0, r3, r4 diff --git a/arch/powerpc/cpu/mpc83xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc83xx/u-boot-spl.lds index d140453d49..870b47d6af 100644 --- a/arch/powerpc/cpu/mpc83xx/u-boot-spl.lds +++ b/arch/powerpc/cpu/mpc83xx/u-boot-spl.lds @@ -49,7 +49,7 @@ SECTIONS .bss (NOLOAD) : { *(.*bss) } - __bss_end__ = .; + __bss_end = .; } ENTRY(_start) -ASSERT(__bss_end__ <= 0xfff01000, "NAND bootstrap too big"); +ASSERT(__bss_end <= 0xfff01000, "NAND bootstrap too big"); diff --git a/arch/powerpc/cpu/mpc83xx/u-boot.lds b/arch/powerpc/cpu/mpc83xx/u-boot.lds index d699def9dd..a9d8598839 100644 --- a/arch/powerpc/cpu/mpc83xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc83xx/u-boot.lds @@ -61,7 +61,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -85,7 +85,7 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } ENTRY(_start) diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index fb674694e4..3f76ee66cf 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -70,7 +70,7 @@ #endif GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end__) + GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) END_GOT @@ -1784,7 +1784,7 @@ clear_bss: * Now clear BSS segment */ lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end__) + lwz r4,GOT(__bss_end) cmplw 0,r3,r4 beq 6f diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds index f7c4a22d29..65106f5e1f 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds @@ -72,7 +72,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -103,6 +103,6 @@ SECTIONS } :bss . = ALIGN(4); - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds index 46dbaed1e0..80cd98093a 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds @@ -54,7 +54,7 @@ SECTIONS _edata = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(8); @@ -80,6 +80,6 @@ SECTIONS *(.sbss*) *(.bss*) } - __bss_end__ = .; + __bss_end = .; } ASSERT(__init_end <= (0xfff00000 + RESET_VECTOR_OFFSET), "NAND bootstrap too big"); diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds index 1c408e29f5..f2b7bffdab 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds @@ -83,5 +83,5 @@ SECTIONS *(.sbss*) *(.bss*) } - __bss_end__ = .; + __bss_end = .; } diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds index 4a40a1f51b..0503dce5ae 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds @@ -80,7 +80,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -127,6 +127,6 @@ SECTIONS } :bss . = ALIGN(4); - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/arch/powerpc/cpu/mpc86xx/start.S b/arch/powerpc/cpu/mpc86xx/start.S index ef80ecf6e5..20dfb9e0e2 100644 --- a/arch/powerpc/cpu/mpc86xx/start.S +++ b/arch/powerpc/cpu/mpc86xx/start.S @@ -61,7 +61,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end__) + GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) END_GOT @@ -800,7 +800,7 @@ in_ram: * Now clear BSS segment */ lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end__) + lwz r4,GOT(__bss_end) cmplw 0, r3, r4 beq 6f diff --git a/arch/powerpc/cpu/mpc86xx/u-boot.lds b/arch/powerpc/cpu/mpc86xx/u-boot.lds index 8bfadf28dc..7e357baf95 100644 --- a/arch/powerpc/cpu/mpc86xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc86xx/u-boot.lds @@ -67,7 +67,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -90,6 +90,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/arch/powerpc/cpu/mpc8xx/start.S b/arch/powerpc/cpu/mpc8xx/start.S index ebca3acbaa..5aa50c512c 100644 --- a/arch/powerpc/cpu/mpc8xx/start.S +++ b/arch/powerpc/cpu/mpc8xx/start.S @@ -72,7 +72,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end__) + GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) END_GOT @@ -590,7 +590,7 @@ clear_bss: * Now clear BSS segment */ lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end__) + lwz r4,GOT(__bss_end) cmplw 0, r3, r4 beq 6f diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S index 7aef43b210..52f2623373 100644 --- a/arch/powerpc/cpu/ppc4xx/start.S +++ b/arch/powerpc/cpu/ppc4xx/start.S @@ -243,7 +243,7 @@ GOT_ENTRY(transfer_to_handler) GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end__) + GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) END_GOT #endif /* CONFIG_NAND_SPL */ @@ -1509,7 +1509,7 @@ clear_bss: * Now clear BSS segment */ lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end__) + lwz r4,GOT(__bss_end) cmplw 0, r3, r4 beq 7f diff --git a/arch/powerpc/cpu/ppc4xx/u-boot.lds b/arch/powerpc/cpu/ppc4xx/u-boot.lds index a96ddd5577..06010d6b14 100644 --- a/arch/powerpc/cpu/ppc4xx/u-boot.lds +++ b/arch/powerpc/cpu/ppc4xx/u-boot.lds @@ -81,7 +81,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -142,6 +142,6 @@ SECTIONS } :bss . = ALIGN(4); - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/arch/powerpc/include/asm/immap_512x.h b/arch/powerpc/include/asm/immap_512x.h index f763a5413e..d96e53646a 100644 --- a/arch/powerpc/include/asm/immap_512x.h +++ b/arch/powerpc/include/asm/immap_512x.h @@ -227,7 +227,9 @@ typedef struct clk512x { #define CLOCK_SCCR2_IIM_EN 0x00080000 /* SCFR1 System Clock Frequency Register 1 */ +#ifndef SCFR1_IPS_DIV #define SCFR1_IPS_DIV 0x3 +#endif #define SCFR1_IPS_DIV_MASK 0x03800000 #define SCFR1_IPS_DIV_SHIFT 23 @@ -238,6 +240,12 @@ typedef struct clk512x { #define SCFR1_LPC_DIV_MASK 0x00003800 #define SCFR1_LPC_DIV_SHIFT 11 +#define SCFR1_NFC_DIV_MASK 0x00000700 +#define SCFR1_NFC_DIV_SHIFT 8 + +#define SCFR1_DIU_DIV_MASK 0x000000FF +#define SCFR1_DIU_DIV_SHIFT 0 + /* SCFR2 System Clock Frequency Register 2 */ #define SCFR2_SYS_DIV 0xFC000000 #define SCFR2_SYS_DIV_SHIFT 26 @@ -343,6 +351,7 @@ typedef struct ddr512x { /* MDDRC SYS CFG and Timing CFG0 Registers */ #define MDDRC_SYS_CFG_EN 0xF0000000 +#define MDDRC_SYS_CFG_CKE_MASK 0x40000000 #define MDDRC_SYS_CFG_CMD_MASK 0x10000000 #define MDDRC_REFRESH_ZERO_MASK 0x0000FFFF @@ -871,6 +880,19 @@ typedef struct iopin_t { void iopin_initialize(iopin_t *,int); /* + * support to adjust individual parts of the IO pin setup + */ + +#define IO_PIN_OVER_EACH (1 << 0) /* for compatibility */ +#define IO_PIN_OVER_FMUX (1 << 1) +#define IO_PIN_OVER_HOLD (1 << 2) +#define IO_PIN_OVER_PULL (1 << 3) +#define IO_PIN_OVER_STRIG (1 << 4) +#define IO_PIN_OVER_DRVSTR (1 << 5) + +void iopin_initialize_bits(iopin_t *, int); + +/* * IIM */ typedef struct iim512x { diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h new file mode 100644 index 0000000000..0a94102dee --- /dev/null +++ b/arch/powerpc/include/asm/sections.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_POWERPC_SECTIONS_H +#define __ASM_POWERPC_SECTIONS_H + +#include <asm-generic/sections.h> + +#endif diff --git a/arch/powerpc/include/asm/spl.h b/arch/powerpc/include/asm/spl.h index f43bc23c92..7d5f9a0a33 100644 --- a/arch/powerpc/include/asm/spl.h +++ b/arch/powerpc/include/asm/spl.h @@ -26,6 +26,6 @@ #define BOOT_DEVICE_NOR 1 /* Linker symbols */ -extern char __bss_start[], __bss_end__[]; +extern char __bss_start[], __bss_end[]; #endif diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h index 7229a98eaa..cf972d20ce 100644 --- a/arch/powerpc/include/asm/u-boot.h +++ b/arch/powerpc/include/asm/u-boot.h @@ -34,6 +34,11 @@ * include/asm-ppc/u-boot.h */ +#ifdef CONFIG_SYS_GENERIC_BOARD +/* Use the generic board which requires a unified bd_info */ +#include <asm-generic/u-boot.h> +#else + #ifndef __ASSEMBLY__ typedef struct bd_info { @@ -144,6 +149,8 @@ typedef struct bd_info { #endif /* __ASSEMBLY__ */ +#endif /* !CONFIG_SYS_GENERIC_BOARD */ + /* For image.h:image_check_target_arch() */ #define IH_ARCH_DEFAULT IH_ARCH_PPC diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 86cf02ace4..59c723b070 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -59,8 +59,10 @@ SOBJS-y += reloc.o COBJS-$(CONFIG_BAT_RW) += bat_rw.o ifndef CONFIG_SPL_BUILD +ifndef CONFIG_SYS_GENERIC_BOARD COBJS-y += board.o endif +endif COBJS-y += bootm.o COBJS-y += cache.o COBJS-y += extable.o diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index 12270a4533..422b4a39bb 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -123,7 +123,7 @@ DECLARE_GLOBAL_DATA_PTR; #endif extern ulong __init_end; -extern ulong __bss_end__; +extern ulong __bss_end; ulong monitor_flash_len; #if defined(CONFIG_CMD_BEDBUG) @@ -237,25 +237,18 @@ static int init_func_spi(void) /***********************************************************************/ #if defined(CONFIG_WATCHDOG) -static int init_func_watchdog_init(void) +int init_func_watchdog_init(void) { puts(" Watchdog enabled\n"); WATCHDOG_RESET(); return 0; } -#define INIT_FUNC_WATCHDOG_INIT init_func_watchdog_init, - -static int init_func_watchdog_reset(void) +int init_func_watchdog_reset(void) { WATCHDOG_RESET(); return 0; } - -#define INIT_FUNC_WATCHDOG_RESET init_func_watchdog_reset, -#else -#define INIT_FUNC_WATCHDOG_INIT /* undef */ -#define INIT_FUNC_WATCHDOG_RESET /* undef */ #endif /* CONFIG_WATCHDOG */ /* @@ -326,7 +319,8 @@ static init_fnc_t *init_sequence[] = { #ifdef CONFIG_POST post_init_f, #endif - INIT_FUNC_WATCHDOG_RESET init_func_ram, + INIT_FUNC_WATCHDOG_RESET + init_func_ram, #if defined(CONFIG_SYS_DRAM_TEST) testdram, #endif /* CONFIG_SYS_DRAM_TEST */ @@ -419,7 +413,7 @@ void board_init_f(ulong bootflag) * - monitor code * - board info struct */ - len = (ulong)&__bss_end__ - CONFIG_SYS_MONITOR_BASE; + len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE; /* * Subtract specified amount of memory to hide so that it won't diff --git a/arch/sandbox/config.mk b/arch/sandbox/config.mk index 02ce4a4410..4fd0d4e58f 100644 --- a/arch/sandbox/config.mk +++ b/arch/sandbox/config.mk @@ -18,4 +18,5 @@ # MA 02111-1307 USA PLATFORM_CPPFLAGS += -DCONFIG_SANDBOX -D__SANDBOX__ -U_FORTIFY_SOURCE +PLATFORM_CPPFLAGS += -DCONFIG_ARCH_MAP_SYSMEM PLATFORM_LIBS += -lrt diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c index 36637af6ce..d07540776c 100644 --- a/arch/sandbox/cpu/os.c +++ b/arch/sandbox/cpu/os.c @@ -19,10 +19,13 @@ * MA 02111-1307 USA */ +#include <dirent.h> #include <errno.h> #include <fcntl.h> #include <getopt.h> +#include <stdio.h> #include <stdlib.h> +#include <string.h> #include <termios.h> #include <time.h> #include <unistd.h> @@ -44,6 +47,14 @@ ssize_t os_read(int fd, void *buf, size_t count) return read(fd, buf, count); } +ssize_t os_read_no_block(int fd, void *buf, size_t count) +{ + const int flags = fcntl(fd, F_GETFL, 0); + + fcntl(fd, F_SETFL, flags | O_NONBLOCK); + return os_read(fd, buf, count); +} + ssize_t os_write(int fd, const void *buf, size_t count) { return write(fd, buf, count); @@ -253,3 +264,101 @@ int os_parse_args(struct sandbox_state *state, int argc, char *argv[]) return 0; } + +void os_dirent_free(struct os_dirent_node *node) +{ + struct os_dirent_node *next; + + while (node) { + next = node->next; + free(node); + node = next; + } +} + +int os_dirent_ls(const char *dirname, struct os_dirent_node **headp) +{ + struct dirent entry, *result; + struct os_dirent_node *head, *node, *next; + struct stat buf; + DIR *dir; + int ret; + char *fname; + int len; + + *headp = NULL; + dir = opendir(dirname); + if (!dir) + return -1; + + /* Create a buffer for the maximum filename length */ + len = sizeof(entry.d_name) + strlen(dirname) + 2; + fname = malloc(len); + if (!fname) { + ret = -ENOMEM; + goto done; + } + + for (node = head = NULL;; node = next) { + ret = readdir_r(dir, &entry, &result); + if (ret || !result) + break; + next = malloc(sizeof(*node) + strlen(entry.d_name) + 1); + if (!next) { + os_dirent_free(head); + ret = -ENOMEM; + goto done; + } + strcpy(next->name, entry.d_name); + switch (entry.d_type) { + case DT_REG: + next->type = OS_FILET_REG; + break; + case DT_DIR: + next->type = OS_FILET_DIR; + break; + case DT_LNK: + next->type = OS_FILET_LNK; + break; + } + next->size = 0; + snprintf(fname, len, "%s/%s", dirname, next->name); + if (!stat(fname, &buf)) + next->size = buf.st_size; + if (node) + node->next = next; + if (!head) + head = node; + } + *headp = head; + +done: + closedir(dir); + return ret; +} + +const char *os_dirent_typename[OS_FILET_COUNT] = { + " ", + "SYM", + "DIR", + "???", +}; + +const char *os_dirent_get_typename(enum os_dirent_t type) +{ + if (type >= 0 && type < OS_FILET_COUNT) + return os_dirent_typename[type]; + + return os_dirent_typename[OS_FILET_UNKNOWN]; +} + +ssize_t os_get_filesize(const char *fname) +{ + struct stat buf; + int ret; + + ret = stat(fname, &buf); + if (ret) + return ret; + return buf.st_size; +} diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c index 7603bf9008..5287fd5ee8 100644 --- a/arch/sandbox/cpu/start.c +++ b/arch/sandbox/cpu/start.c @@ -122,4 +122,7 @@ int main(int argc, char *argv[]) * never return. */ board_init_f(0); + + /* NOTREACHED - board_init_f() does not return */ + return 0; } diff --git a/arch/sandbox/cpu/u-boot.lds b/arch/sandbox/cpu/u-boot.lds index 1b781ebf6a..94c26f1aad 100644 --- a/arch/sandbox/cpu/u-boot.lds +++ b/arch/sandbox/cpu/u-boot.lds @@ -27,7 +27,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } __u_boot_sandbox_option_start = .; diff --git a/arch/sandbox/include/asm/io.h b/arch/sandbox/include/asm/io.h index 0392d218ec..d8c02364d9 100644 --- a/arch/sandbox/include/asm/io.h +++ b/arch/sandbox/include/asm/io.h @@ -39,3 +39,13 @@ static inline void unmap_physmem(void *vaddr, unsigned long flags) { } + +/* For sandbox, we want addresses to point into our RAM buffer */ +static inline void *map_sysmem(phys_addr_t paddr, unsigned long len) +{ + return map_physmem(paddr, len, MAP_WRBACK); +} + +static inline void unmap_sysmem(const void *vaddr) +{ +} diff --git a/arch/sandbox/include/asm/sections.h b/arch/sandbox/include/asm/sections.h index eafce7d8ab..4c378600b0 100644 --- a/arch/sandbox/include/asm/sections.h +++ b/arch/sandbox/include/asm/sections.h @@ -9,6 +9,8 @@ #ifndef __SANDBOX_SECTIONS_H #define __SANDBOX_SECTIONS_H +#include <asm-generic/sections.h> + struct sb_cmdline_option; extern struct sb_cmdline_option *__u_boot_sandbox_option_start[], diff --git a/arch/sh/cpu/sh2/u-boot.lds b/arch/sh/cpu/sh2/u-boot.lds index 17f8091ea4..3cd5699c89 100644 --- a/arch/sh/cpu/sh2/u-boot.lds +++ b/arch/sh/cpu/sh2/u-boot.lds @@ -74,7 +74,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .); @@ -88,5 +88,5 @@ SECTIONS } PROVIDE (bss_end = .); - PROVIDE (__bss_end__ = .); + PROVIDE (__bss_end = .); } diff --git a/arch/sh/cpu/sh3/u-boot.lds b/arch/sh/cpu/sh3/u-boot.lds index c8319610c2..654c52cda7 100644 --- a/arch/sh/cpu/sh3/u-boot.lds +++ b/arch/sh/cpu/sh3/u-boot.lds @@ -80,7 +80,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .); @@ -95,5 +95,5 @@ SECTIONS } PROVIDE (bss_end = .); - PROVIDE (__bss_end__ = .); + PROVIDE (__bss_end = .); } diff --git a/arch/sh/cpu/sh4/u-boot.lds b/arch/sh/cpu/sh4/u-boot.lds index 0ecafcf5d9..11d7ffab7e 100644 --- a/arch/sh/cpu/sh4/u-boot.lds +++ b/arch/sh/cpu/sh4/u-boot.lds @@ -77,7 +77,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .); @@ -92,5 +92,5 @@ SECTIONS } PROVIDE (bss_end = .); - PROVIDE (__bss_end__ = .); + PROVIDE (__bss_end = .); } diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h new file mode 100644 index 0000000000..8824560eea --- /dev/null +++ b/arch/sh/include/asm/sections.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_SH_SECTIONS_H +#define __ASM_SH_SECTIONS_H + +#include <asm-generic/sections.h> + +#endif diff --git a/arch/sh/lib/board.c b/arch/sh/lib/board.c index 34d7881f44..6e43acfbd3 100644 --- a/arch/sh/lib/board.c +++ b/arch/sh/lib/board.c @@ -65,6 +65,7 @@ static int sh_flash_init(void) #if defined(CONFIG_WATCHDOG) extern int watchdog_init(void); extern int watchdog_disable(void); +# undef INIT_FUNC_WATCHDOG_INIT # define INIT_FUNC_WATCHDOG_INIT watchdog_init, # define WATCHDOG_DISABLE watchdog_disable #else diff --git a/arch/sparc/cpu/leon2/Makefile b/arch/sparc/cpu/leon2/Makefile index a9a18eb1ff..d4dc397034 100644 --- a/arch/sparc/cpu/leon2/Makefile +++ b/arch/sparc/cpu/leon2/Makefile @@ -43,13 +43,6 @@ $(LIB): $(OBJS) # defines $(obj).depend target include $(SRCTREE)/rules.mk -$(START): $(START:.o=.S) - $(CC) -D__ASSEMBLY__ $(DBGFLAGS) $(OPTFLAGS) -D__KERNEL__ \ - -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) -I$(TOPDIR)/include \ - -fno-builtin -ffreestanding -nostdinc -isystem $(gccincdir) -pipe \ - $(PLATFORM_CPPFLAGS) -Wall -Wstrict-prototypes \ - -I$(TOPDIR)/board -c -o $(START) $(START:.o=.S) - sinclude $(obj).depend ######################################################################### diff --git a/arch/sparc/cpu/leon2/serial.c b/arch/sparc/cpu/leon2/serial.c index 40d5b01d27..b41ee01818 100644 --- a/arch/sparc/cpu/leon2/serial.c +++ b/arch/sparc/cpu/leon2/serial.c @@ -31,16 +31,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* Force cache miss each time a serial controller reg is read */ -#define CACHE_BYPASS 1 - -#ifdef CACHE_BYPASS -#define READ_BYTE(var) SPARC_NOCACHE_READ_BYTE((unsigned int)&(var)) -#define READ_HWORD(var) SPARC_NOCACHE_READ_HWORD((unsigned int)&(var)) -#define READ_WORD(var) SPARC_NOCACHE_READ((unsigned int)&(var)) -#define READ_DWORD(var) SPARC_NOCACHE_READ_DWORD((unsigned int)&(var)) -#endif - static int leon2_serial_init(void) { LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS; diff --git a/arch/sparc/cpu/leon3/Makefile b/arch/sparc/cpu/leon3/Makefile index 16d3377c73..1d051e17a3 100644 --- a/arch/sparc/cpu/leon3/Makefile +++ b/arch/sparc/cpu/leon3/Makefile @@ -43,13 +43,6 @@ $(LIB): $(OBJS) # defines $(obj).depend target include $(SRCTREE)/rules.mk -$(START): $(START:.o=.S) - $(CC) -D__ASSEMBLY__ $(DBGFLAGS) $(OPTFLAGS) -D__KERNEL__ \ - -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) -I$(TOPDIR)/include \ - -fno-builtin -ffreestanding -nostdinc -isystem $(gccincdir) -pipe \ - $(PLATFORM_CPPFLAGS) -Wall -Wstrict-prototypes \ - -I$(TOPDIR)/board -c -o $(START) $(START:.o=.S) - sinclude $(obj).depend ######################################################################### diff --git a/arch/sparc/cpu/leon3/serial.c b/arch/sparc/cpu/leon3/serial.c index 838d4514ee..af9ce55673 100644 --- a/arch/sparc/cpu/leon3/serial.c +++ b/arch/sparc/cpu/leon3/serial.c @@ -32,16 +32,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* Force cache miss each time a serial controller reg is read */ -#define CACHE_BYPASS 1 - -#ifdef CACHE_BYPASS -#define READ_BYTE(var) SPARC_NOCACHE_READ_BYTE((unsigned int)&(var)) -#define READ_HWORD(var) SPARC_NOCACHE_READ_HWORD((unsigned int)&(var)) -#define READ_WORD(var) SPARC_NOCACHE_READ((unsigned int)&(var)) -#define READ_DWORD(var) SPARC_NOCACHE_READ_DWORD((unsigned int)&(var)) -#endif - ambapp_dev_apbuart *leon3_apbuart = NULL; static int leon3_serial_init(void) diff --git a/arch/sparc/include/asm/sections.h b/arch/sparc/include/asm/sections.h new file mode 100644 index 0000000000..90f7fa7a3d --- /dev/null +++ b/arch/sparc/include/asm/sections.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_SPARC_SECTIONS_H +#define __ASM_SPARC_SECTIONS_H + +#include <asm-generic/sections.h> + +#endif diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c index 1b5e995b15..79fb4c87ef 100644 --- a/arch/sparc/lib/board.c +++ b/arch/sparc/lib/board.c @@ -271,7 +271,6 @@ void board_init_f(ulong bootflag) /* The Malloc area is immediately below the monitor copy in RAM */ mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_END - CONFIG_SYS_MALLOC_BASE); - malloc_bin_reloc(); #if !defined(CONFIG_SYS_NO_FLASH) puts("Flash: "); diff --git a/arch/x86/config.mk b/arch/x86/config.mk index 23cacffded..168dc24fda 100644 --- a/arch/x86/config.mk +++ b/arch/x86/config.mk @@ -36,6 +36,9 @@ PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_X86) PLATFORM_CPPFLAGS += -fno-dwarf2-cfi-asm PLATFORM_CPPFLAGS += -DREALMODE_BASE=0x7c0 +# Support generic board on x86 +__HAVE_ARCH_GENERIC_BOARD := y + PLATFORM_RELFLAGS += -ffunction-sections -fvisibility=hidden PLATFORM_LDFLAGS += --emit-relocs -Bsymbolic -Bsymbolic-functions diff --git a/arch/x86/cpu/coreboot/coreboot.c b/arch/x86/cpu/coreboot/coreboot.c index 9c9431e0d9..f8e28f0c82 100644 --- a/arch/x86/cpu/coreboot/coreboot.c +++ b/arch/x86/cpu/coreboot/coreboot.c @@ -68,24 +68,21 @@ int board_early_init_r(void) void show_boot_progress(int val) { #if MIN_PORT80_KCLOCKS_DELAY - static uint32_t prev_stamp; - static uint32_t base; - /* * Scale the time counter reading to avoid using 64 bit arithmetics. * Can't use get_timer() here becuase it could be not yet * initialized or even implemented. */ - if (!prev_stamp) { - base = rdtsc() / 1000; - prev_stamp = 0; + if (!gd->arch.tsc_prev) { + gd->arch.tsc_base_kclocks = rdtsc() / 1000; + gd->arch.tsc_prev = 0; } else { uint32_t now; do { - now = rdtsc() / 1000 - base; - } while (now < (prev_stamp + MIN_PORT80_KCLOCKS_DELAY)); - prev_stamp = now; + now = rdtsc() / 1000 - gd->arch.tsc_base_kclocks; + } while (now < (gd->arch.tsc_prev + MIN_PORT80_KCLOCKS_DELAY)); + gd->arch.tsc_prev = now; } #endif outb(val, 0x80); diff --git a/arch/x86/cpu/coreboot/sdram.c b/arch/x86/cpu/coreboot/sdram.c index 76274cb88e..786009c746 100644 --- a/arch/x86/cpu/coreboot/sdram.c +++ b/arch/x86/cpu/coreboot/sdram.c @@ -28,6 +28,7 @@ #include <asm/u-boot-x86.h> #include <asm/global_data.h> #include <asm/processor.h> +#include <asm/sections.h> #include <asm/arch/sysinfo.h> #include <asm/arch/tables.h> @@ -60,12 +61,8 @@ unsigned install_e820_map(unsigned max_entries, struct e820entry *entries) * address, and how far U-Boot is moved by relocation are set in the global * data structure. */ -int calculate_relocation_address(void) +ulong board_get_usable_ram_top(ulong total_size) { - const uint64_t uboot_size = (uintptr_t)&__bss_end - - (uintptr_t)&__text_start; - const uint64_t total_size = uboot_size + CONFIG_SYS_MALLOC_LEN + - CONFIG_SYS_STACK_SIZE; uintptr_t dest_addr = 0; int i; @@ -87,21 +84,15 @@ int calculate_relocation_address(void) continue; /* Use this address if it's the largest so far. */ - if (end - uboot_size > dest_addr) + if (end > dest_addr) dest_addr = end; } /* If no suitable area was found, return an error. */ if (!dest_addr) - return 1; + panic("No available memory found for relocation"); - dest_addr -= uboot_size; - dest_addr &= ~((1 << 12) - 1); - gd->relocaddr = dest_addr; - gd->reloc_off = dest_addr - (uintptr_t)&__text_start; - gd->start_addr_sp = dest_addr - CONFIG_SYS_MALLOC_LEN; - - return 0; + return (ulong)dest_addr; } int dram_init_f(void) diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index 6a23974ff5..1a2f85c1fe 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -228,3 +228,26 @@ void flush_dcache_range(unsigned long start, unsigned long stop) void invalidate_dcache_range(unsigned long start, unsigned long stop) { } + +void dcache_enable(void) +{ + enable_caches(); +} + +void dcache_disable(void) +{ + disable_caches(); +} + +void icache_enable(void) +{ +} + +void icache_disable(void) +{ +} + +int icache_status(void) +{ + return 1; +} diff --git a/arch/x86/cpu/interrupts.c b/arch/x86/cpu/interrupts.c index dd30a05a9d..6dc74e34c6 100644 --- a/arch/x86/cpu/interrupts.c +++ b/arch/x86/cpu/interrupts.c @@ -626,13 +626,12 @@ asm(".globl irq_common_entry\n" \ */ u64 get_ticks(void) { - static u64 tick_base; u64 now_tick = rdtsc(); - if (!tick_base) - tick_base = now_tick; + if (!gd->arch.tsc_base) + gd->arch.tsc_base = now_tick; - return now_tick - tick_base; + return now_tick - gd->arch.tsc_base; } #define PLATFORM_INFO_MSR 0xce diff --git a/arch/x86/cpu/u-boot.lds b/arch/x86/cpu/u-boot.lds index 2313cd793a..2d6911aa41 100644 --- a/arch/x86/cpu/u-boot.lds +++ b/arch/x86/cpu/u-boot.lds @@ -36,7 +36,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); @@ -46,9 +46,6 @@ SECTIONS .data : { *(.data*) } . = ALIGN(4); - .dynsym : { *(.dynsym*) } - - . = ALIGN(4); .hash : { *(.hash*) } . = ALIGN(4); @@ -56,17 +53,25 @@ SECTIONS . = ALIGN(4); __data_end = .; + __init_end = .; . = ALIGN(4); - __bss_start = ABSOLUTE(.); - .bss (NOLOAD) : { *(.bss) } - . = ALIGN(4); - __bss_end = ABSOLUTE(.); + .dynsym : { *(.dynsym*) } . = ALIGN(4); __rel_dyn_start = .; .rel.dyn : { *(.rel.dyn) } __rel_dyn_end = .; + . = ALIGN(4); + _end = .; + + .bss __rel_dyn_start (OVERLAY) : { + __bss_start = .; + *(.bss) + *(COM*) + . = ALIGN(4); + __bss_end = .; + } /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } diff --git a/arch/x86/include/asm/config.h b/arch/x86/include/asm/config.h index 049c44eaf8..3961b82811 100644 --- a/arch/x86/include/asm/config.h +++ b/arch/x86/include/asm/config.h @@ -21,4 +21,5 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_SYS_GENERIC_BOARD #endif diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h index 8a96fc96e8..4fdb08090a 100644 --- a/arch/x86/include/asm/global_data.h +++ b/arch/x86/include/asm/global_data.h @@ -29,6 +29,10 @@ /* Architecture-specific global data */ struct arch_global_data { struct global_data *gd_addr; /* Location of Global Data */ + uint64_t tsc_base; /* Initial value returned by rdtsc() */ + uint32_t tsc_base_kclocks; /* Initial tsc as a kclocks value */ + uint32_t tsc_prev; /* For show_boot_progress() */ + void *new_fdt; /* Relocated FDT */ }; #endif diff --git a/arch/x86/include/asm/init_helpers.h b/arch/x86/include/asm/init_helpers.h index 2f437e0343..d018b290c1 100644 --- a/arch/x86/include/asm/init_helpers.h +++ b/arch/x86/include/asm/init_helpers.h @@ -38,5 +38,7 @@ int flash_init_r(void); int status_led_set_r(void); int set_load_addr_r(void); int init_func_spi(void); +int find_fdt(void); +int prepare_fdt(void); #endif /* !_INIT_HELPERS_H_ */ diff --git a/arch/x86/include/asm/relocate.h b/arch/x86/include/asm/relocate.h index 33129ef64b..d371c9d641 100644 --- a/arch/x86/include/asm/relocate.h +++ b/arch/x86/include/asm/relocate.h @@ -27,6 +27,7 @@ #include <common.h> int copy_uboot_to_ram(void); +int copy_fdt_to_ram(void); int clear_bss(void); int do_elf_reloc_fixups(void); diff --git a/arch/x86/include/asm/sections.h b/arch/x86/include/asm/sections.h new file mode 100644 index 0000000000..602df86120 --- /dev/null +++ b/arch/x86/include/asm/sections.h @@ -0,0 +1,27 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_X86_SECTIONS_H +#define __ASM_X86_SECTIONS_H + +#include <asm-generic/sections.h> + +#endif diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h index 99062e5955..ae0c3883e4 100644 --- a/arch/x86/include/asm/u-boot-x86.h +++ b/arch/x86/include/asm/u-boot-x86.h @@ -24,14 +24,6 @@ #ifndef _U_BOOT_I386_H_ #define _U_BOOT_I386_H_ 1 -/* Exports from the Linker Script */ -extern ulong __text_start; -extern ulong __data_end; -extern ulong __rel_dyn_start; -extern ulong __rel_dyn_end; -extern ulong __bss_start; -extern ulong __bss_end; - /* cpu/.../cpu.c */ int x86_cpu_init_r(void); int cpu_init_r(void); diff --git a/arch/x86/include/asm/u-boot.h b/arch/x86/include/asm/u-boot.h index 2f45c7b3d7..df759faec4 100644 --- a/arch/x86/include/asm/u-boot.h +++ b/arch/x86/include/asm/u-boot.h @@ -39,6 +39,13 @@ #include <config.h> #include <compiler.h> +#ifdef CONFIG_SYS_GENERIC_BOARD +/* Use the generic board which requires a unified bd_info */ +#include <asm-generic/u-boot.h> +#else + +#ifndef __ASSEMBLY__ + typedef struct bd_info { unsigned long bi_memstart; /* start of DRAM memory */ phys_size_t bi_memsize; /* size of DRAM memory in bytes */ @@ -60,6 +67,10 @@ typedef struct bd_info { }bi_dram[CONFIG_NR_DRAM_BANKS]; } bd_t; +#endif /* __ASSEMBLY__ */ + +#endif /* !CONFIG_SYS_GENERIC_BOARD */ + /* For image.h:image_check_target_arch() */ #define IH_ARCH_DEFAULT IH_ARCH_I386 diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index 9b24dc5fdf..ee89354808 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -25,7 +25,10 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(ARCH).o +ifeq ($(CONFIG_SYS_GENERIC_BOARD),) COBJS-y += board.o +endif + COBJS-y += bootm.o COBJS-y += cmd_boot.o COBJS-y += gcc.o diff --git a/arch/x86/lib/board.c b/arch/x86/lib/board.c index 22bc26dde9..452e5d8262 100644 --- a/arch/x86/lib/board.c +++ b/arch/x86/lib/board.c @@ -32,11 +32,13 @@ */ #include <common.h> +#include <fdtdec.h> #include <watchdog.h> #include <stdio_dev.h> #include <asm/u-boot-x86.h> #include <asm/relocate.h> #include <asm/processor.h> +#include <asm/sections.h> #include <asm/init_helpers.h> #include <asm/init_wrappers.h> @@ -131,6 +133,7 @@ init_fnc_t *init_sequence_f[] = { init_fnc_t *init_sequence_f_r[] = { init_cache_f_r, copy_uboot_to_ram, + copy_fdt_to_ram, clear_bss, do_elf_reloc_fixups, @@ -217,6 +220,7 @@ static void do_init_loop(init_fnc_t **init_fnc_ptr) void board_init_f(ulong boot_flags) { + gd->fdt_blob = gd->new_fdt = NULL; gd->flags = boot_flags; do_init_loop(init_sequence_f); diff --git a/arch/x86/lib/init_helpers.c b/arch/x86/lib/init_helpers.c index 3eec9a61d6..af9dbc146a 100644 --- a/arch/x86/lib/init_helpers.c +++ b/arch/x86/lib/init_helpers.c @@ -22,6 +22,7 @@ */ #include <common.h> #include <command.h> +#include <fdtdec.h> #include <stdio_dev.h> #include <version.h> #include <malloc.h> @@ -31,6 +32,7 @@ #include <spi.h> #include <status_led.h> #include <asm/processor.h> +#include <asm/sections.h> #include <asm/u-boot-x86.h> #include <linux/compiler.h> @@ -73,26 +75,52 @@ int init_baudrate_f(void) return 0; } -__weak int calculate_relocation_address(void) +/* Get the top of usable RAM */ +__weak ulong board_get_usable_ram_top(ulong total_size) { - ulong text_start = (ulong)&__text_start; - ulong bss_end = (ulong)&__bss_end; + return gd->ram_size; +} + +int calculate_relocation_address(void) +{ + const ulong uboot_size = (uintptr_t)&__bss_end - + (uintptr_t)&__text_start; + ulong total_size; ulong dest_addr; + ulong fdt_size = 0; +#if defined(CONFIG_OF_SEPARATE) && defined(CONFIG_OF_CONTROL) + if (gd->fdt_blob) + fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32); +#endif + total_size = ALIGN(uboot_size, 1 << 12) + CONFIG_SYS_MALLOC_LEN + + CONFIG_SYS_STACK_SIZE + fdt_size; + + dest_addr = board_get_usable_ram_top(total_size); /* * NOTE: All destination address are rounded down to 16-byte * boundary to satisfy various worst-case alignment * requirements */ - - /* Stack is at top of available memory */ - dest_addr = gd->ram_size; - - /* U-Boot is at the top */ - dest_addr -= (bss_end - text_start); dest_addr &= ~15; + +#if defined(CONFIG_OF_SEPARATE) && defined(CONFIG_OF_CONTROL) + /* + * If the device tree is sitting immediate above our image then we + * must relocate it. If it is embedded in the data section, then it + * will be relocated with other data. + */ + if (gd->fdt_blob) { + dest_addr -= fdt_size; + gd->new_fdt = (void *)dest_addr; + dest_addr &= ~15; + } +#endif + /* U-Boot is below the FDT */ + dest_addr -= uboot_size; + dest_addr &= ~((1 << 12) - 1); gd->relocaddr = dest_addr; - gd->reloc_off = (dest_addr - text_start); + gd->reloc_off = dest_addr - (uintptr_t)&__text_start; /* Stack is at the bottom, so it can grow down */ gd->start_addr_sp = dest_addr - CONFIG_SYS_MALLOC_LEN; @@ -180,7 +208,7 @@ int find_fdt(void) gd->fdt_blob = _binary_dt_dtb_start; #elif defined CONFIG_OF_SEPARATE /* FDT is at end of image */ - gd->fdt_blob = (void *)(_end_ofs + _TEXT_BASE); + gd->fdt_blob = (ulong *)&_end; #endif /* Allow the early environment to override the fdt address */ gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16, diff --git a/arch/x86/lib/init_wrappers.c b/arch/x86/lib/init_wrappers.c index cca018fa9b..19af875c0e 100644 --- a/arch/x86/lib/init_wrappers.c +++ b/arch/x86/lib/init_wrappers.c @@ -22,6 +22,7 @@ */ #include <common.h> #include <environment.h> +#include <fdtdec.h> #include <serial.h> #include <kgdb.h> #include <scsi.h> diff --git a/arch/x86/lib/relocate.c b/arch/x86/lib/relocate.c index 23edca9526..f178db9c81 100644 --- a/arch/x86/lib/relocate.c +++ b/arch/x86/lib/relocate.c @@ -32,9 +32,11 @@ */ #include <common.h> +#include <libfdt.h> #include <malloc.h> #include <asm/u-boot-x86.h> #include <asm/relocate.h> +#include <asm/sections.h> #include <elf.h> int copy_uboot_to_ram(void) @@ -46,6 +48,22 @@ int copy_uboot_to_ram(void) return 0; } +int copy_fdt_to_ram(void) +{ + if (gd->new_fdt) { + ulong fdt_size; + + fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32); + + memcpy(gd->new_fdt, gd->fdt_blob, fdt_size); + debug("Relocated fdt from %p to %p, size %lx\n", + gd->fdt_blob, gd->new_fdt, fdt_size); + gd->fdt_blob = gd->new_fdt; + } + + return 0; +} + int clear_bss(void) { ulong dst_addr = (ulong)&__bss_start + gd->reloc_off; @@ -56,12 +74,16 @@ int clear_bss(void) return 0; } +/* + * This function has more error checking than you might expect. Please see + * the commit message for more informaiton. + */ int do_elf_reloc_fixups(void) { Elf32_Rel *re_src = (Elf32_Rel *)(&__rel_dyn_start); Elf32_Rel *re_end = (Elf32_Rel *)(&__rel_dyn_end); - Elf32_Addr *offset_ptr_rom; + Elf32_Addr *offset_ptr_rom, *last_offset = NULL; Elf32_Addr *offset_ptr_ram; /* The size of the region of u-boot that runs out of RAM. */ @@ -72,7 +94,8 @@ int do_elf_reloc_fixups(void) offset_ptr_rom = (Elf32_Addr *)re_src->r_offset; /* Check that the location of the relocation is in .text */ - if (offset_ptr_rom >= (Elf32_Addr *)CONFIG_SYS_TEXT_BASE) { + if (offset_ptr_rom >= (Elf32_Addr *)CONFIG_SYS_TEXT_BASE && + offset_ptr_rom > last_offset) { /* Switch to the in-RAM version */ offset_ptr_ram = (Elf32_Addr *)((ulong)offset_ptr_rom + @@ -83,8 +106,19 @@ int do_elf_reloc_fixups(void) *offset_ptr_ram <= (CONFIG_SYS_TEXT_BASE + size)) { *offset_ptr_ram += gd->reloc_off; + } else { + debug(" %p: rom reloc %x, ram %p, value %x," + " limit %lx\n", re_src, + re_src->r_offset, offset_ptr_ram, + *offset_ptr_ram, + CONFIG_SYS_TEXT_BASE + size); } + } else { + debug(" %p: rom reloc %x, last %p\n", re_src, + re_src->r_offset, last_offset); } + last_offset = offset_ptr_rom; + } while (++re_src < re_end); return 0; diff --git a/arch/x86/lib/timer.c b/arch/x86/lib/timer.c index a13424b3e3..1f8ce609e2 100644 --- a/arch/x86/lib/timer.c +++ b/arch/x86/lib/timer.c @@ -37,7 +37,6 @@ struct timer_isr_function { static struct timer_isr_function *first_timer_isr; static unsigned long system_ticks; -static uint64_t base_value; /* * register_timer_isr() allows multiple architecture and board specific @@ -102,7 +101,7 @@ ulong get_timer(ulong base) void timer_set_tsc_base(uint64_t new_base) { - base_value = new_base; + gd->arch.tsc_base = new_base; } uint64_t timer_get_tsc(void) @@ -110,8 +109,8 @@ uint64_t timer_get_tsc(void) uint64_t time_now; time_now = rdtsc(); - if (!base_value) - base_value = time_now; + if (!gd->arch.tsc_base) + gd->arch.tsc_base = time_now; - return time_now - base_value; + return time_now - gd->arch.tsc_base; } diff --git a/board/BuS/eb_cpu5282/u-boot.lds b/board/BuS/eb_cpu5282/u-boot.lds index 0c92d31f61..c72043d235 100644 --- a/board/BuS/eb_cpu5282/u-boot.lds +++ b/board/BuS/eb_cpu5282/u-boot.lds @@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -93,6 +93,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds index 2bb876d689..2b76e92e4f 100644 --- a/board/LEOX/elpt860/u-boot.lds +++ b/board/LEOX/elpt860/u-boot.lds @@ -89,7 +89,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -112,6 +112,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/RPXClassic/u-boot.lds b/board/RPXClassic/u-boot.lds index 18f962cfa5..3334a44f61 100644 --- a/board/RPXClassic/u-boot.lds +++ b/board/RPXClassic/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/RPXClassic/u-boot.lds.debug b/board/RPXClassic/u-boot.lds.debug index dc8c4e958f..e88bd977d9 100644 --- a/board/RPXClassic/u-boot.lds.debug +++ b/board/RPXClassic/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/RPXlite/u-boot.lds b/board/RPXlite/u-boot.lds index 18f962cfa5..3334a44f61 100644 --- a/board/RPXlite/u-boot.lds +++ b/board/RPXlite/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/RPXlite/u-boot.lds.debug b/board/RPXlite/u-boot.lds.debug index dc8c4e958f..e88bd977d9 100644 --- a/board/RPXlite/u-boot.lds.debug +++ b/board/RPXlite/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/RPXlite_dw/u-boot.lds b/board/RPXlite_dw/u-boot.lds index 18f962cfa5..3334a44f61 100644 --- a/board/RPXlite_dw/u-boot.lds +++ b/board/RPXlite_dw/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/RPXlite_dw/u-boot.lds.debug b/board/RPXlite_dw/u-boot.lds.debug index b43a1e4281..88c410cd92 100644 --- a/board/RPXlite_dw/u-boot.lds.debug +++ b/board/RPXlite_dw/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/RRvision/u-boot.lds b/board/RRvision/u-boot.lds index 748e5113ef..84bb763c7b 100644 --- a/board/RRvision/u-boot.lds +++ b/board/RRvision/u-boot.lds @@ -74,7 +74,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -98,6 +98,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/a3m071/README b/board/a3m071/README index 7698614a62..a0fe832fb2 100644 --- a/board/a3m071/README +++ b/board/a3m071/README @@ -62,7 +62,7 @@ the following command: All this can be integrated into an environment command: => setenv upd_fdt 'tftp 1800000 a3m071/a3m071.dtb;run mtdargs addip2 addtty; \ - fdt addr 1800000;fdt boardsetup;erase fc060000 fc07ffff; \ + fdt addr 1800000;fdt boardsetup;fdt chosen;erase fc060000 fc07ffff; \ cp.b 1800000 fc060000 10000' => saveenv diff --git a/board/a3m071/a3m071.c b/board/a3m071/a3m071.c index 89ced824eb..0f9f883e90 100644 --- a/board/a3m071/a3m071.c +++ b/board/a3m071/a3m071.c @@ -24,10 +24,15 @@ #include <mpc5xxx.h> #include <pci.h> #include <miiphy.h> +#include <linux/compiler.h> #include <asm/processor.h> #include <asm/io.h> +#ifdef CONFIG_A4M2K +#include "is46r16320d.h" +#else #include "mt46v16m16-75.h" +#endif DECLARE_GLOBAL_DATA_PTR; @@ -63,6 +68,12 @@ static void sdram_start(int hi_addr) /* normal operation */ out_be32((void *)MPC5XXX_SDRAM_CTRL, control); + + /* + * Wait a short while for the DLL to lock before accessing + * the SDRAM + */ + udelay(100); } #endif @@ -157,12 +168,6 @@ static void get_revisions(int *failsavelevel, int *digiboardversion, struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT; u8 val; - /* - * Figure out failsavelevel - * see ticket dsvk#59 - */ - *failsavelevel = 0; /* 0=failsave, 1=board ok, 2=fpga ok */ - /* read digitalboard-version from TMR[2..4] */ val = 0; val |= (gpt->gpt2.sr & (1 << (31 - 23))) ? (1) : 0; @@ -170,6 +175,17 @@ static void get_revisions(int *failsavelevel, int *digiboardversion, val |= (gpt->gpt4.sr & (1 << (31 - 23))) ? (1 << 2) : 0; *digiboardversion = val; + /* + * A4M2K only supports digiboardversion. No failsavelevel and + * fpgaversion here. + */ +#if !defined(CONFIG_A4M2K) + /* + * Figure out failsavelevel + * see ticket dsvk#59 + */ + *failsavelevel = 0; /* 0=failsave, 1=board ok, 2=fpga ok */ + if (*digiboardversion == 0) { *failsavelevel = 1; /* digiboard-version ok */ @@ -183,6 +199,7 @@ static void get_revisions(int *failsavelevel, int *digiboardversion, if (*fpgaversion == 1) *failsavelevel = 2; /* fpga-version ok */ } +#endif } /* @@ -196,6 +213,11 @@ void spl_board_init(void) struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; struct mpc5xxx_mmap_ctl *mm = (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; + +#if defined(CONFIG_A4M2K) + /* enable CS3 and CS5 (FPGA) */ + setbits_be32(&mm->ipbi_ws_ctrl, (1 << 19) | (1 << 21)); +#else int digiboardversion; int failsavelevel; int fpgaversion; @@ -219,6 +241,7 @@ void spl_board_init(void) /* And write new value back to register */ out_be32(&mm->ipbi_ws_ctrl, val); +#endif /* * No need to change the pin multiplexing (MPC5XXX_GPS_PORT_CONFIG) @@ -232,8 +255,57 @@ void spl_board_init(void) * MPC5XXX_WU_GPIO_DIR direction is already 0 (INPUT) * set bit 0(msb) to 1 */ - setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, 1 << (31 - 0)); + setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, CONFIG_WDOG_GPIO_PIN); + +#if defined(CONFIG_A4M2K) + /* Setup USB[x] as MPCDiag[0..3] GPIO outputs */ + + /* set USB0,6,7,8 (MPCDiag[0..3]) direction to output */ + gpio->simple_ddr |= 1 << (31 - 15); + gpio->simple_ddr |= 1 << (31 - 14); + gpio->simple_ddr |= 1 << (31 - 13); + gpio->simple_ddr |= 1 << (31 - 12); + + /* enable USB0,6,7,8 (MPCDiag[0..3]) as GPIO */ + gpio->simple_gpioe |= 1 << (31 - 15); + gpio->simple_gpioe |= 1 << (31 - 14); + gpio->simple_gpioe |= 1 << (31 - 13); + gpio->simple_gpioe |= 1 << (31 - 12); + + /* Setup PSC2[0..2] as STSLED[0..2] GPIO outputs */ + + /* set PSC2[0..2] (STSLED[0..2]) direction to output */ + gpio->simple_ddr |= 1 << (31 - 27); + gpio->simple_ddr |= 1 << (31 - 26); + gpio->simple_ddr |= 1 << (31 - 25); + + /* enable PSC2[0..2] (STSLED[0..2]) as GPIO */ + gpio->simple_gpioe |= 1 << (31 - 27); + gpio->simple_gpioe |= 1 << (31 - 26); + gpio->simple_gpioe |= 1 << (31 - 25); + + /* Setup PSC6[2] as MRST2 self reset GPIO output */ + + /* set PSC6[2]/IRDA_TX (MRST2) direction to output */ + gpio->simple_ddr |= 1 << (31 - 3); + + /* set PSC6[2]/IRDA_TX (MRST2) output as open drain */ + gpio->simple_ode |= 1 << (31 - 3); + /* set PSC6[2]/IRDA_TX (MRST2) output as default high */ + gpio->simple_dvo |= 1 << (31 - 3); + + /* enable PSC6[2]/IRDA_TX (MRST2) as GPIO */ + gpio->simple_gpioe |= 1 << (31 - 3); + + /* Setup PSC6[3] as HARNSSCD harness code GPIO input */ + + /* set PSC6[3]/IR_USB_CLK (HARNSSCD) direction to input */ + gpio->simple_ddr |= 0 << (31 - 2); + + /* enable PSC6[3]/IR_USB_CLK (HARNSSCD) as GPIO */ + gpio->simple_gpioe |= 1 << (31 - 2); +#else /* setup GPIOs for status-leds if needed - see ticket #57 */ if (failsavelevel > 0) { /* digiboard-version is OK */ @@ -267,7 +339,7 @@ void spl_board_init(void) * already cleared (intr_ctrl) MBAR+0x0510 ECLR[0] bit above */ } - +#endif } int checkboard(void) @@ -278,11 +350,16 @@ int checkboard(void) get_revisions(&failsavelevel, &digiboardversion, &fpgaversion); +#ifdef CONFIG_A4M2K + puts("Board: A4M2K\n"); + printf(" digiboard IO version %u\n", digiboardversion); +#else puts("Board: A3M071\n"); printf("Rev: failsave level %u\n", failsavelevel); printf(" digiboard IO version %u\n", digiboardversion); if (failsavelevel > 0) /* only if fpga-version red */ printf(" fpga IO version %u\n", fpgaversion); +#endif return 0; } @@ -333,3 +410,57 @@ int spl_start_uboot(void) return 1; } #endif + +#if defined(CONFIG_HW_WATCHDOG) +static int watchdog_toggle; + +void hw_watchdog_reset(void) +{ + int val; + + /* + * Check if watchdog is enabled via user command + */ + if ((gd->flags & GD_FLG_RELOC) && watchdog_toggle) { + /* Set direction to output */ + setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, CONFIG_WDOG_GPIO_PIN); + + /* + * Toggle watchdog output + */ + val = (in_be32((void *)MPC5XXX_WU_GPIO_DATA_O) & + CONFIG_WDOG_GPIO_PIN); + if (val) { + clrbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, + CONFIG_WDOG_GPIO_PIN); + } else { + setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, + CONFIG_WDOG_GPIO_PIN); + } + } +} + +int do_wdog_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + if (argc != 2) + goto usage; + + if (strncmp(argv[1], "on", 2) == 0) + watchdog_toggle = 1; + else if (strncmp(argv[1], "off", 3) == 0) + watchdog_toggle = 0; + else + goto usage; + + return 0; +usage: + printf("Usage: wdogtoggle %s\n", cmdtp->usage); + return 1; +} + +U_BOOT_CMD( + wdogtoggle, CONFIG_SYS_MAXARGS, 2, do_wdog_toggle, + "toggle GPIO pin to service watchdog", + "[on/off] - Switch watchdog toggling via GPIO pin on/off" +); +#endif diff --git a/board/a3m071/is46r16320d.h b/board/a3m071/is46r16320d.h new file mode 100644 index 0000000000..8183d81469 --- /dev/null +++ b/board/a3m071/is46r16320d.h @@ -0,0 +1,35 @@ +/* + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#define SDRAM_DDR /* is DDR */ + +#if defined(CONFIG_MPC5200) +/* Settings for XLB = 132 MHz */ +/* see is46r16320d datasheet and MPC5200UM chap. 8.6.1. */ + +/* SDRAM Config Standard timing */ +#define SDRAM_MODE 0x008d0000 +#define SDRAM_EMODE 0x40010000 +#define SDRAM_CONTROL 0x70430f00 +#define SDRAM_CONFIG1 0x33622930 +#define SDRAM_CONFIG2 0x46670000 +#define SDRAM_TAPDELAY 0x10000000 + +#else +#error CONFIG_MPC5200 not defined +#endif diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds index c41eed0e6f..c76728a7fb 100644 --- a/board/actux1/u-boot.lds +++ b/board/actux1/u-boot.lds @@ -41,15 +41,15 @@ SECTIONS *(.text*) } - . = ALIGN (4); + . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - . = ALIGN (4); + . = ALIGN(4); .data : { *(.data*) } - . = ALIGN (4); + . = ALIGN(4); .got : { *(.got) } @@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN (4); @@ -72,13 +72,21 @@ SECTIONS *(.dynsym) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + _end = .; + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - _end = .; + __bss_end = .; } - __bss_end__ =.; + .bss_end __bss_end (OVERLAY) : { + KEEP(*(__bss_end)); + } + /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) } diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds index 84099840b5..984f70e510 100644 --- a/board/actux2/u-boot.lds +++ b/board/actux2/u-boot.lds @@ -41,15 +41,15 @@ SECTIONS *(.text*) } - . = ALIGN (4); + . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - . = ALIGN (4); + . = ALIGN(4); .data : { *(.data*) } - . = ALIGN (4); + . = ALIGN(4); .got : { *(.got) } @@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN (4); @@ -72,13 +72,21 @@ SECTIONS *(.dynsym) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + _end = .; + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - _end = .; + __bss_end = .; } - __bss_end__ =.; + .bss_end __bss_end (OVERLAY) : { + KEEP(*(__bss_end)); + } + /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) } diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds index a3bd02b0d2..fc48cf03fd 100644 --- a/board/actux3/u-boot.lds +++ b/board/actux3/u-boot.lds @@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN (4); @@ -72,13 +72,21 @@ SECTIONS *(.dynsym) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + _end = .; + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - _end = .; + __bss_end = .; } - __bss_end__ =.; + .bss_end __bss_end (OVERLAY) : { + KEEP(*(__bss_end)); + } + /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) } diff --git a/board/adder/u-boot.lds b/board/adder/u-boot.lds index 73e2f3f9cf..def2f1f938 100644 --- a/board/adder/u-boot.lds +++ b/board/adder/u-boot.lds @@ -65,7 +65,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -89,7 +89,7 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } ENTRY(_start) diff --git a/board/ait/cam_enc_4xx/u-boot-spl.lds b/board/ait/cam_enc_4xx/u-boot-spl.lds index 656b2fbf89..dd9d52db4b 100644 --- a/board/ait/cam_enc_4xx/u-boot-spl.lds +++ b/board/ait/cam_enc_4xx/u-boot-spl.lds @@ -48,10 +48,6 @@ SECTIONS . = ALIGN(4); .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } >.sram - . = ALIGN(4); .rel.dyn : { __rel_dyn_start = .; *(.rel*) @@ -69,7 +65,7 @@ SECTIONS __bss_start = .; *(.bss*) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } >.sram __image_copy_end = .; diff --git a/board/altera/nios2-generic/u-boot.lds b/board/altera/nios2-generic/u-boot.lds index 289386b35c..f3095982b6 100644 --- a/board/altera/nios2-generic/u-boot.lds +++ b/board/altera/nios2-generic/u-boot.lds @@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } /* INIT DATA sections - "Small" data (see the gcc -G option) @@ -102,7 +102,7 @@ SECTIONS *(.scommon) } . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; PROVIDE (end = .); /* DEBUG -- symbol table, string table, etc. etc. diff --git a/board/amcc/acadia/u-boot-nand.lds b/board/amcc/acadia/u-boot-nand.lds index beba978f83..e9f026fb7e 100644 --- a/board/amcc/acadia/u-boot-nand.lds +++ b/board/amcc/acadia/u-boot-nand.lds @@ -74,7 +74,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -98,6 +98,6 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/amcc/bamboo/u-boot-nand.lds b/board/amcc/bamboo/u-boot-nand.lds index 2dd00d7f42..209f48450a 100644 --- a/board/amcc/bamboo/u-boot-nand.lds +++ b/board/amcc/bamboo/u-boot-nand.lds @@ -75,7 +75,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -99,6 +99,6 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/amcc/canyonlands/u-boot-nand.lds b/board/amcc/canyonlands/u-boot-nand.lds index 8ac5116296..3d616133d0 100644 --- a/board/amcc/canyonlands/u-boot-nand.lds +++ b/board/amcc/canyonlands/u-boot-nand.lds @@ -75,7 +75,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -99,6 +99,6 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/amcc/kilauea/u-boot-nand.lds b/board/amcc/kilauea/u-boot-nand.lds index beba978f83..e9f026fb7e 100644 --- a/board/amcc/kilauea/u-boot-nand.lds +++ b/board/amcc/kilauea/u-boot-nand.lds @@ -74,7 +74,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -98,6 +98,6 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds index 18266efd09..2ea3944412 100644 --- a/board/amcc/sequoia/u-boot-nand.lds +++ b/board/amcc/sequoia/u-boot-nand.lds @@ -75,7 +75,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -99,6 +99,6 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/amcc/sequoia/u-boot-ram.lds b/board/amcc/sequoia/u-boot-ram.lds index 6b02784926..1b537f6f40 100644 --- a/board/amcc/sequoia/u-boot-ram.lds +++ b/board/amcc/sequoia/u-boot-ram.lds @@ -66,7 +66,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -90,6 +90,6 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/astro/mcf5373l/u-boot.lds b/board/astro/mcf5373l/u-boot.lds index bc40fd649d..264e43f54d 100644 --- a/board/astro/mcf5373l/u-boot.lds +++ b/board/astro/mcf5373l/u-boot.lds @@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -97,6 +97,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index 2555672524..3aa394a4bb 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -157,13 +157,18 @@ int board_early_init_f(void) int board_init(void) { +#ifdef CONFIG_AT91SAM9G20EK_2MMC + /* arch number of AT91SAM9G20EK_2MMC-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK_2MMC; +#else #ifdef CONFIG_AT91SAM9G20EK - /* arch number of AT91SAM9260EK-Board */ + /* arch number of AT91SAM9G20EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK; #else /* arch number of AT91SAM9260EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK; #endif +#endif /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c index e6a932ec3c..ea95e43286 100644 --- a/board/avionic-design/common/tamonten.c +++ b/board/avionic-design/common/tamonten.c @@ -33,13 +33,8 @@ #include <asm/arch/tegra.h> #include <asm/arch-tegra/board.h> #include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra/mmc.h> #include <asm/arch-tegra/sys_proto.h> #include <asm/arch-tegra/uart.h> -#ifdef CONFIG_TEGRA_MMC -#include <mmc.h> -#endif - #ifdef CONFIG_BOARD_EARLY_INIT_F void gpio_early_init(void) @@ -54,7 +49,7 @@ void gpio_early_init(void) * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) */ -static void pin_mux_mmc(void) +void pin_mux_mmc(void) { funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT); /* for write-protect GPIO PI6 */ @@ -62,16 +57,4 @@ static void pin_mux_mmc(void) /* for CD GPIO PH2 */ pinmux_tristate_disable(PINGRP_ATD); } - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) -{ - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - /* init dev 0, SD slot, with 4-bit bus */ - tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); - - return 0; -} #endif diff --git a/board/avionic-design/dts/tegra20-medcom-wide.dts b/board/avionic-design/dts/tegra20-medcom-wide.dts index e46afbeab3..a9a07f9bcd 100644 --- a/board/avionic-design/dts/tegra20-medcom-wide.dts +++ b/board/avionic-design/dts/tegra20-medcom-wide.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20-tamonten.dtsi" / { model = "Avionic Design Medcom-Wide"; @@ -8,6 +8,7 @@ aliases { usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; }; memory { diff --git a/board/avionic-design/dts/tegra20-plutux.dts b/board/avionic-design/dts/tegra20-plutux.dts index 3e6cce013e..20016f29bb 100644 --- a/board/avionic-design/dts/tegra20-plutux.dts +++ b/board/avionic-design/dts/tegra20-plutux.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20-tamonten.dtsi" / { model = "Avionic Design Plutux"; @@ -8,6 +8,7 @@ aliases { usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; }; memory { diff --git a/board/avionic-design/dts/tegra20-tamonten.dtsi b/board/avionic-design/dts/tegra20-tamonten.dtsi new file mode 100644 index 0000000000..86c7bab160 --- /dev/null +++ b/board/avionic-design/dts/tegra20-tamonten.dtsi @@ -0,0 +1,489 @@ +#include "tegra20.dtsi" + +/ { + model = "Avionic Design Tamonten SOM"; + compatible = "ad,tamonten", "nvidia,tegra20"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + host1x { + hdmi { + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ata { + nvidia,pins = "ata"; + nvidia,function = "ide"; + }; + atb { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + }; + atc { + nvidia,pins = "atc"; + nvidia,function = "nand"; + }; + atd { + nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu", + "spia", "spib", "spic"; + nvidia,function = "gmi"; + }; + cdev1 { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + }; + cdev2 { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; + }; + crtp { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + }; + csus { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + }; + dap1 { + nvidia,pins = "dap1"; + nvidia,function = "dap1"; + }; + dap2 { + nvidia,pins = "dap2"; + nvidia,function = "dap2"; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + }; + dap4 { + nvidia,pins = "dap4"; + nvidia,function = "dap4"; + }; + dta { + nvidia,pins = "dta", "dtd"; + nvidia,function = "sdio2"; + }; + dtb { + nvidia,pins = "dtb", "dtc", "dte"; + nvidia,function = "rsvd1"; + }; + dtf { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + }; + gmc { + nvidia,pins = "gmc"; + nvidia,function = "uartd"; + }; + gpu7 { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + }; + gpv { + nvidia,pins = "gpv", "slxa", "slxk"; + nvidia,function = "pcie"; + }; + hdint { + nvidia,pins = "hdint"; + nvidia,function = "hdmi"; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + }; + irrx { + nvidia,pins = "irrx", "irtx"; + nvidia,function = "uarta"; + }; + kbca { + nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", + "kbce", "kbcf"; + nvidia,function = "kbc"; + }; + lcsn { + nvidia,pins = "lcsn", "ld0", "ld1", "ld2", + "ld3", "ld4", "ld5", "ld6", "ld7", + "ld8", "ld9", "ld10", "ld11", "ld12", + "ld13", "ld14", "ld15", "ld16", "ld17", + "ldc", "ldi", "lhp0", "lhp1", "lhp2", + "lhs", "lm0", "lm1", "lpp", "lpw0", + "lpw1", "lpw2", "lsc0", "lsc1", "lsck", + "lsda", "lsdi", "lspi", "lvp0", "lvp1", + "lvs"; + nvidia,function = "displaya"; + }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + }; + rm { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + }; + sdb { + nvidia,pins = "sdb", "sdc", "sdd"; + nvidia,function = "pwm"; + }; + sdio1 { + nvidia,pins = "sdio1"; + nvidia,function = "sdio1"; + }; + slxc { + nvidia,pins = "slxc", "slxd"; + nvidia,function = "spdif"; + }; + spid { + nvidia,pins = "spid", "spie", "spif"; + nvidia,function = "spi1"; + }; + spig { + nvidia,pins = "spig", "spih"; + nvidia,function = "spi2_alt"; + }; + uaa { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; + }; + uad { + nvidia,pins = "uad"; + nvidia,function = "irda"; + }; + uca { + nvidia,pins = "uca", "ucb"; + nvidia,function = "uartc"; + }; + conf_ata { + nvidia,pins = "ata", "atb", "atc", "atd", "ate", + "cdev1", "cdev2", "dap1", "dtb", "gma", + "gmb", "gmc", "gmd", "gme", "gpu7", + "gpv", "i2cp", "pta", "rm", "slxa", + "slxk", "spia", "spib", "uac"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + conf_ck32 { + nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", + "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; + nvidia,pull = <0>; + }; + conf_csus { + nvidia,pins = "csus", "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; + conf_crtp { + nvidia,pins = "crtp", "dap2", "dap3", "dap4", + "dtc", "dte", "dtf", "gpu", "sdio1", + "slxc", "slxd", "spdi", "spdo", "spig", + "uda"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + conf_ddc { + nvidia,pins = "ddc", "dta", "dtd", "kbca", + "kbcb", "kbcc", "kbcd", "kbce", "kbcf", + "sdc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + conf_hdint { + nvidia,pins = "hdint", "lcsn", "ldc", "lm1", + "lpw1", "lsc1", "lsck", "lsda", "lsdi", + "lvp0", "owc", "sdb"; + nvidia,tristate = <1>; + }; + conf_irrx { + nvidia,pins = "irrx", "irtx", "sdd", "spic", + "spie", "spih", "uaa", "uab", "uad", + "uca", "ucb"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + }; + conf_lc { + nvidia,pins = "lc", "ls"; + nvidia,pull = <2>; + }; + conf_ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldi", "lhp0", + "lhp1", "lhp2", "lhs", "lm0", "lpp", + "lpw0", "lpw2", "lsc0", "lspi", "lvp1", + "lvs", "pmc"; + nvidia,tristate = <0>; + }; + conf_ld17_0 { + nvidia,pins = "ld17_0", "ld19_18", "ld21_20", + "ld23_22"; + nvidia,pull = <1>; + }; + }; + + state_i2cmux_ddc: pinmux_i2cmux_ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux_i2cmux_pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + + state_i2cmux_idle: pinmux_i2cmux_idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + }; + + i2s@70002800 { + status = "okay"; + }; + + serial@70006300 { + status = "okay"; + }; + + i2c@7000c000 { + clock-frequency = <400000>; + status = "okay"; + }; + + i2c@7000c400 { + clock-frequency = <100000>; + status = "okay"; + }; + + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@7000c400}>; + + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + hdmi_ddc: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2c@7000d000 { + clock-frequency = <400000>; + status = "okay"; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + sys_reg: sys { + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + sm0 { + regulator-name = "vdd_sys_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + sm1 { + regulator-name = "vdd_sys_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: sm2 { + regulator-name = "vdd_sys_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + ldo0 { + regulator-name = "vdd_ldo0,vddio_pex_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo1 { + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo2 { + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo3 { + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4 { + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5 { + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + ldo6 { + regulator-name = "vdd_ldo6,avdd_vdac"; + /* + * According to the Tegra 2 Automotive + * DataSheet, a typical value for this + * would be 2.8V, but the PMIC only + * supports 2.85V. + */ + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + hdmi_vdd_reg: ldo7 { + regulator-name = "vdd_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + hdmi_pll_reg: ldo8 { + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo9 { + regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam"; + /* + * According to the Tegra 2 Automotive + * DataSheet, a typical value for this + * would be 2.8V, but the PMIC only + * supports 2.85V. + */ + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + ldo_rtc { + regulator-name = "vdd_rtc_out"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + }; + }; + + pmc { + nvidia,invert-interrupt; + }; + + usb@c5008000 { + status = "okay"; + }; + + sdhci@c8000600 { + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + bus-width = <4>; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; diff --git a/board/avionic-design/dts/tegra20-tec.dts b/board/avionic-design/dts/tegra20-tec.dts index bf3ff1d009..1d7cf89eb6 100644 --- a/board/avionic-design/dts/tegra20-tec.dts +++ b/board/avionic-design/dts/tegra20-tec.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20-tamonten.dtsi" / { model = "Avionic Design Tamonten Evaluation Carrier"; @@ -8,6 +8,7 @@ aliases { usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; }; memory { diff --git a/board/ns9750dev/Makefile b/board/bf609-ezkit/Makefile index 0d082c5696..0bb8fe643e 100644 --- a/board/ns9750dev/Makefile +++ b/board/bf609-ezkit/Makefile @@ -1,4 +1,8 @@ # +# U-boot - Makefile +# +# Copyright (c) 2005-2008 Analog Device Inc. +# # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # @@ -25,16 +29,22 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := ns9750dev.o flash.o led.o -SOBJS := lowlevel_init.o +COBJS-y := $(BOARD).o +COBJS-$(CONFIG_BFIN_SOFT_SWITCH) += soft_switch.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + ######################################################################### # defines $(obj).depend target diff --git a/board/bf609-ezkit/bf609-ezkit.c b/board/bf609-ezkit/bf609-ezkit.c new file mode 100644 index 0000000000..0388226db4 --- /dev/null +++ b/board/bf609-ezkit/bf609-ezkit.c @@ -0,0 +1,67 @@ +/* + * U-boot - main board file + * + * Copyright (c) 2008-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <netdev.h> +#include <asm/blackfin.h> +#include <asm/io.h> +#include <asm/portmux.h> +#include "soft_switch.h" + +int checkboard(void) +{ + printf("Board: ADI BF609 EZ-Kit board\n"); + printf(" Support: http://blackfin.uclinux.org/\n"); + return 0; +} + +int board_early_init_f(void) +{ + static const unsigned short pins[] = { + P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, + P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21, + P_A22, P_A23, P_A24, P_A25, P_NORCK, 0, + }; + peripheral_request_list(pins, "smc0"); + + return 0; +} + +#ifdef CONFIG_DESIGNWARE_ETH +int board_eth_init(bd_t *bis) +{ + int ret = 0; + + if (CONFIG_DW_PORTS & 1) { + static const unsigned short pins[] = P_RMII0; + if (!peripheral_request_list(pins, "emac0")) + ret += designware_initialize(0, EMAC0_MACCFG, 1, 0); + } + if (CONFIG_DW_PORTS & 2) { + static const unsigned short pins[] = P_RMII1; + if (!peripheral_request_list(pins, "emac1")) + ret += designware_initialize(1, EMAC1_MACCFG, 1, 0); + } + + return ret; +} +#endif + +#ifdef CONFIG_BFIN_SDH +int board_mmc_init(bd_t *bis) +{ + return bfin_mmc_init(bis); +} +#endif + +/* miscellaneous platform dependent initialisations */ +int misc_init_r(void) +{ + printf("other init\n"); + return setup_board_switches(); +} diff --git a/board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg b/board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg new file mode 100644 index 0000000000..16a37d0ced --- /dev/null +++ b/board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 +DATA 4, MX6_MMDC_P0_MDCFG0, 0x555A7974 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB538F64 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x005A1023 +DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 +DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 +DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 +DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x19308030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P0_MDREF, 0x00005800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42720306 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x026F0266 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x4273030A +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x02740240 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45393B3E +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x403A3747 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x40434541 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x473E4A3B +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0011000E +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x000E001B +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00190015 +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x00070018 +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg b/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg new file mode 100644 index 0000000000..0607703825 --- /dev/null +++ b/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 +DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E7974 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xDB538F64 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023 +DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 +DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 +DATA 4, MX6_MMDC_P0_MDASP, 0x00000047 +DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04088032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x19308030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x43040319 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03040279 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x43040321 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x03030251 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4d434248 +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x42413c4d +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x34424543 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x49324933 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001a0017 +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00170027 +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x000a001f +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/boundary/nitrogen6x/6x_bootscript.txt b/board/boundary/nitrogen6x/6x_bootscript.txt new file mode 100644 index 0000000000..061b3a44b5 --- /dev/null +++ b/board/boundary/nitrogen6x/6x_bootscript.txt @@ -0,0 +1,63 @@ +setenv bootargs enable_wait_mode=off +setenv nextcon 0; + +if hdmidet ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24 + setenv fbmem "fbmem=28M"; + setexpr nextcon $nextcon + 1 +else + echo "------ no HDMI monitor"; +fi + +i2c dev 2 +if i2c probe 0x04 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,LDB-XGA,if=RGB666 + if test "0" -eq $nextcon; then + setenv fbmem "fbmem=10M"; + else + setenv fbmem ${fbmem},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no Freescale display"; +fi + +if i2c probe 0x38 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666 + if test "0" -eq $nextcon; then + setenv fbmem "fbmem=10M"; + else + setenv fbmem ${fbmem},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no 1024x600 display"; +fi + +if i2c probe 0x48 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=lcd,CLAA-WVGA,if=RGB666 + if test "0" -eq $nextcon; then + setenv fbmem "fbmem=10M"; + else + setenv fbmem ${fbmem},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no 800x480 display"; +fi + +while test "3" -ne $nextcon ; do + setenv bootargs $bootargs video=mxcfb${nextcon}:off ; + setexpr nextcon $nextcon + 1 ; +done + +setenv bootargs $bootargs $fbmem +setenv bootargs "$bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 rootwait" + +if test "sata" = "${dtype}" ; then + setenv bootargs "$bootargs root=/dev/sda1" ; +else + setenv "bootargs $bootargs root=/dev/mmcblk0p1" ; +fi +${fs}load ${dtype} ${disk}:1 10800000 /boot/uImage && bootm 10800000 ; +echo "Error loading kernel image" diff --git a/board/boundary/nitrogen6x/6x_bootscript_android.txt b/board/boundary/nitrogen6x/6x_bootscript_android.txt new file mode 100644 index 0000000000..0982cf8054 --- /dev/null +++ b/board/boundary/nitrogen6x/6x_bootscript_android.txt @@ -0,0 +1,64 @@ +${dtype} dev ${disk} + +setenv bootargs enable_wait_mode=off +setenv nextcon 0; +setenv bootargs $bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 ; + +i2c dev 2 + +if i2c probe 0x04 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,LDB-XGA,if=RGB666 + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=10M"; + else + setenv fbcon ${fbcon},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no Freescale display"; +fi + +if i2c probe 0x38 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666 + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=10M"; + else + setenv fbcon ${fbcon},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no 1024x600 display"; +fi + +if i2c probe 0x48 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=lcd,CLAA-WVGA,if=RGB666 tsdev=tsc2004 calibration + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=10M"; + else + setenv fbcon ${fbcon},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no 800x480 display"; +fi + +if hdmidet ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24 + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=28M"; + else + setenv fbcon ${fbcon},28M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no HDMI monitor"; +fi + +while test "3" -ne $nextcon ; do + setenv bootargs $bootargs video=mxcfb${nextcon}:off ; + setexpr nextcon $nextcon + 1 ; +done + +setenv bootargs $bootargs fbcon=$fbcon +${fs}load ${dtype} ${disk}:1 10800000 uImage && ${fs}load ${dtype} ${disk}:1 12800000 uramdisk.img && bootm 10800000 12800000 +echo "Error loading kernel image" diff --git a/board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt b/board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt new file mode 100644 index 0000000000..0982cf8054 --- /dev/null +++ b/board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt @@ -0,0 +1,64 @@ +${dtype} dev ${disk} + +setenv bootargs enable_wait_mode=off +setenv nextcon 0; +setenv bootargs $bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 ; + +i2c dev 2 + +if i2c probe 0x04 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,LDB-XGA,if=RGB666 + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=10M"; + else + setenv fbcon ${fbcon},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no Freescale display"; +fi + +if i2c probe 0x38 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666 + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=10M"; + else + setenv fbcon ${fbcon},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no 1024x600 display"; +fi + +if i2c probe 0x48 ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=lcd,CLAA-WVGA,if=RGB666 tsdev=tsc2004 calibration + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=10M"; + else + setenv fbcon ${fbcon},10M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no 800x480 display"; +fi + +if hdmidet ; then + setenv bootargs $bootargs video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24 + if test "0" -eq $nextcon; then + setenv fbcon "fbcon=28M"; + else + setenv fbcon ${fbcon},28M + fi + setexpr nextcon $nextcon + 1 +else + echo "------ no HDMI monitor"; +fi + +while test "3" -ne $nextcon ; do + setenv bootargs $bootargs video=mxcfb${nextcon}:off ; + setexpr nextcon $nextcon + 1 ; +done + +setenv bootargs $bootargs fbcon=$fbcon +${fs}load ${dtype} ${disk}:1 10800000 uImage && ${fs}load ${dtype} ${disk}:1 12800000 uramdisk.img && bootm 10800000 12800000 +echo "Error loading kernel image" diff --git a/board/boundary/nitrogen6x/6x_upgrade.txt b/board/boundary/nitrogen6x/6x_upgrade.txt new file mode 100644 index 0000000000..0d8e8e542b --- /dev/null +++ b/board/boundary/nitrogen6x/6x_upgrade.txt @@ -0,0 +1,45 @@ +setenv stdout serial,vga +echo "check U-Boot" ; +setenv offset 0x400 +if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk}:1 12000000 u-boot.nopadding ; then + echo "read $filesize bytes from SD card" ; + if sf probe || sf probe || \ + sf probe 1 27000000 || sf probe 1 27000000 ; then + echo "probed SPI ROM" ; + if sf read 0x12400000 $offset $filesize ; then + if cmp.b 0x12000000 0x12400000 $filesize ; then + echo "------- U-Boot versions match" ; + else + echo "Need U-Boot upgrade" ; + echo "Program in 5 seconds" ; + for n in 5 4 3 2 1 ; do + echo $n ; + sleep 1 ; + done + echo "erasing" ; + sf erase 0 0x50000 ; + # two steps to prevent bricking + echo "programming" ; + sf write 0x12000000 $offset $filesize ; + echo "verifying" ; + if sf read 0x12400000 $offset $filesize ; then + if cmp.b 0x12000000 0x12400000 $filesize ; then + while echo "---- U-Boot upgraded. reset" ; do + sleep 120 + done + else + echo "Read verification error" ; + fi + else + echo "Error re-reading EEPROM" ; + fi + fi + else + echo "Error reading boot loader from EEPROM" ; + fi + else + echo "Error initializing EEPROM" ; + fi ; +else + echo "No U-Boot image found on SD card" ; +fi diff --git a/board/boundary/nitrogen6x/800mhz_2x128mx16.cfg b/board/boundary/nitrogen6x/800mhz_2x128mx16.cfg new file mode 100644 index 0000000000..de33e650a1 --- /dev/null +++ b/board/boundary/nitrogen6x/800mhz_2x128mx16.cfg @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D +DATA 4, MX6_MMDC_P0_MDCFG0, 0x40435323 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66E8D63 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x00431023 +DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030 +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D +DATA 4, MX6_MMDC_P0_MDASP, 0x00000017 +DATA 4, MX6_MMDC_P0_MDCTL, 0x83190000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P0_MDREF, 0x00005800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42350231 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x42350231 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021A0218 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x021A0218 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4B4B4E49 +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4B4B4E49 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3035 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3F3F3035 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0040003C +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0032003E +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x0040003C +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0032003E +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/boundary/nitrogen6x/800mhz_2x256mx16.cfg b/board/boundary/nitrogen6x/800mhz_2x256mx16.cfg new file mode 100644 index 0000000000..19707cfe22 --- /dev/null +++ b/board/boundary/nitrogen6x/800mhz_2x256mx16.cfg @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D +DATA 4, MX6_MMDC_P0_MDCFG0, 0x696C5323 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66E8D63 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x006C1023 +DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030 +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D +DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 +DATA 4, MX6_MMDC_P0_MDCTL, 0x84190000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42350231 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021A0218 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x42350231 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x021A0218 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4B4B4E49 +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4B4B4E49 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3035 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3F3F3035 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0040003C +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0032003E +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x0040003C +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0032003E +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/boundary/nitrogen6x/800mhz_4x128mx16.cfg b/board/boundary/nitrogen6x/800mhz_4x128mx16.cfg new file mode 100644 index 0000000000..dd6a423205 --- /dev/null +++ b/board/boundary/nitrogen6x/800mhz_4x128mx16.cfg @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D +DATA 4, MX6_MMDC_P0_MDCFG0, 0x40435323 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66E8D63 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x00431023 +DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030 +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D +DATA 4, MX6_MMDC_P0_MDASP, 0x00000027 +DATA 4, MX6_MMDC_P0_MDCTL, 0x831A0000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P0_MDREF, 0x00005800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x420F020F +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x01760175 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x41640171 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x015E0160 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x45464B4A +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x49484A46 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x40402E32 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3A3A3231 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x003A003A +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0030002F +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x002F0038 +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x00270039 +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/boundary/nitrogen6x/800mhz_4x256mx16.cfg b/board/boundary/nitrogen6x/800mhz_4x256mx16.cfg new file mode 100644 index 0000000000..d5d06e2686 --- /dev/null +++ b/board/boundary/nitrogen6x/800mhz_4x256mx16.cfg @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002D +DATA 4, MX6_MMDC_P0_MDCFG0, 0x696C5323 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xB66E8D63 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x006C1023 +DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030 +DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556D +DATA 4, MX6_MMDC_P0_MDASP, 0x00000047 +DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 +DATA 4, MX6_MMDC_P0_MDSCR, 0x13208030 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 +DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42350231 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x021A0218 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x42350231 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x021A0218 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4B4B4E49 +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4B4B4E49 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3035 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x3F3F3035 +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0040003C +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x0032003E +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x0040003C +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x0032003E +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 diff --git a/board/boundary/nitrogen6x/Makefile b/board/boundary/nitrogen6x/Makefile new file mode 100644 index 0000000000..fe1e5e0c2e --- /dev/null +++ b/board/boundary/nitrogen6x/Makefile @@ -0,0 +1,41 @@ +# +# Copyright (C) 2012-2013, Guennadi Liakhovetski <lg@denx.de> +# (C) Copyright 2012-2013 Freescale Semiconductor, Inc. +# Copyright (C) 2013, Boundary Devices <info@boundarydevices.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := nitrogen6x.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/boundary/nitrogen6x/README b/board/boundary/nitrogen6x/README new file mode 100644 index 0000000000..50490931e0 --- /dev/null +++ b/board/boundary/nitrogen6x/README @@ -0,0 +1,92 @@ +U-Boot for the Boundary Devices Nitrogen6X and +Freescale i.MX6Q SabreLite boards + +This file contains information for the port of +U-Boot to the Boundary Devices Nitrogen6X and +Freescale i.MX6Q SabreLite boards. + +1. Boot source, boot from SPI NOR +--------------------------------- +The configuration in this directory supports both the +Nitrogen6X and Freescale SabreLite board, but in a +different fashion from Freescale's implementation in +board/freescale/mx6qsabrelite. + +In particular, this image supports booting from SPI NOR +and saving the environment to SPI NOR. + +It does not support 'boot from SD' at offset 0x400 +except through the 'bmode' command. + http://lists.denx.de/pipermail/u-boot/2012-August/131151.html + +2. Boots using 6x_bootscript on SATA or SD card +----------------------------------------------- +The default bootcmd for these boards is configured +to look for and source a boot script named '6x_bootscript' +in the root of the first partition of the following +devices: + + sata 0 + mmc 0 + mmc 1 + +They're searched in the order listed above, trying both the +ext2 and fat filesystems. + +2. Maintaining the SPI NOR +-------------------------- +A couple of convenience commands + + clearenv - clear environment to factory default + upgradeu - look and source a boot script named + '6x_upgrade' to upgrade the U-Boot version + in SPI NOR. The search is the same as for + 6x_bootscript described above. + +3. Display support +------------------ +U-Boot support for the following displays is configured by +default: + + HDMI - 1024 x 768 for maximum compatibility + Hannstar-XGA - 1024 x 768 LVDS (Freescale part number MCIMX-LVDS1) + wsvga-lvds - 1024 x 600 LVDS (Boundary p/n Nit6X_1024x600) + wvga-rgb - 800 x 480 RGB (Boundary p/n Nit6X_800x480) + +Since the ipuv3_fb display driver currently supports only a single display, +this code auto-detects panel by probing the HDMI Phy for Hot Plug Detect +or the I2C touch controller of the LVDS and RGB displays in the priority +listed above. + +Setting 'panel' environment variable to one of the names above will +override auto-detection and force activation of the specified panel. + +4. Building +------------ + +To build U-Boot for one of the Nitrogen6x or SabreLite board: + + make nitrogen6x_config + make u-boot.imx + +Note that 'nitrogen6x' is a placeholder. The complete list of supported +board configurations is shown in tha MAINTAINERS file: + nitrogen6q i.MX6Q/6D 1GB + nitrogen6dl i.MX6DL 1GB + nitrogen6s i.MX6S 512MB + nitrogen6q2g i.MX6Q/6D 2GB + nitrogen6dl2g i.MX6DL 2GB + nitrogen6s1g i.MX6S 1GB + +The -6q variants support either the i.MX6Quad or i.MX6Dual processors +and are configured for a 64-bit memory bus at 1066 MHz. + +The -6dl variants also use a 64-bit memory bus, operated at 800MHz. + +The -6s variants use a 32-bit memory bus at 800MHz. + +If you place the u-boot.imx into a single-partition SD card +along with a binary version of the boot script 6x_upgrade.txt, +you can program it using 'upgradeu': + + U-Boot> run upgradeu diff --git a/board/boundary/nitrogen6x/clocks.cfg b/board/boundary/nitrogen6x/clocks.cfg new file mode 100644 index 0000000000..e7d1f86cdb --- /dev/null +++ b/board/boundary/nitrogen6x/clocks.cfg @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* set the default clock gate to save power */ +DATA 4, CCM_CCGR0, 0x00C03F3F +DATA 4, CCM_CCGR1, 0x0030FC03 +DATA 4, CCM_CCGR2, 0x0FFFC000 +DATA 4, CCM_CCGR3, 0x3FF00000 +DATA 4, CCM_CCGR4, 0x00FFF300 +DATA 4, CCM_CCGR5, 0x0F0000C3 +DATA 4, CCM_CCGR6, 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4, MX6_IOMUXC_GPR6, 0x007F007F +DATA 4, MX6_IOMUXC_GPR7, 0x007F007F diff --git a/board/boundary/nitrogen6x/ddr-setup.cfg b/board/boundary/nitrogen6x/ddr-setup.cfg new file mode 100644 index 0000000000..c3158120a4 --- /dev/null +++ b/board/boundary/nitrogen6x/ddr-setup.cfg @@ -0,0 +1,112 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* + * DDR3 settings + * MX6Q ddr is limited to 1066 Mhz currently 1056 MHz(528 MHz clock), + * memory bus width: 64 bits x16/x32/x64 + * MX6DL ddr is limited to 800 MHz(400 MHz clock) + * memory bus width: 64 bits x16/x32/x64 + * MX6SOLO ddr is limited to 800 MHz(400 MHz clock) + * memory bus width: 32 bits x16/x32 + */ +DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030 +DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030 + +DATA 4, MX6_IOM_GRP_B0DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B1DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B2DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B3DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B4DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B5DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B6DS, 0x00000030 +DATA 4, MX6_IOM_GRP_B7DS, 0x00000030 +DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030 +/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ +DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 + +DATA 4, MX6_IOM_DRAM_DQM0, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM1, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM2, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM3, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM4, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM5, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM6, 0x00020030 +DATA 4, MX6_IOM_DRAM_DQM7, 0x00020030 + +DATA 4, MX6_IOM_DRAM_CAS, 0x00020030 +DATA 4, MX6_IOM_DRAM_RAS, 0x00020030 +DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00020030 +DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00020030 + +DATA 4, MX6_IOM_DRAM_RESET, 0x000e0030 +DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000 +DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000 + +DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030 +DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030 + +/* (differential input) */ +DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 +/* (differential input) */ +DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 +/* disable ddr pullups */ +DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 +/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */ +DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 + +/* Read data DQ Byte0-3 delay */ +DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 + +/* + * MDMISC mirroring interleaved (row/bank/col) + */ +DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740 + +/* + * MDSCR con_req + */ +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 diff --git a/board/boundary/nitrogen6x/nitrogen6dl.cfg b/board/boundary/nitrogen6x/nitrogen6dl.cfg new file mode 100644 index 0000000000..d6da96c5e8 --- /dev/null +++ b/board/boundary/nitrogen6x/nitrogen6dl.cfg @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +#include "ddr-setup.cfg" +#include "800mhz_4x128mx16.cfg" +#include "clocks.cfg" diff --git a/board/boundary/nitrogen6x/nitrogen6dl2g.cfg b/board/boundary/nitrogen6x/nitrogen6dl2g.cfg new file mode 100644 index 0000000000..0b1c35c314 --- /dev/null +++ b/board/boundary/nitrogen6x/nitrogen6dl2g.cfg @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +#include "ddr-setup.cfg" +#include "800mhz_4x256mx16.cfg" +#include "clocks.cfg" diff --git a/board/boundary/nitrogen6x/nitrogen6q.cfg b/board/boundary/nitrogen6x/nitrogen6q.cfg new file mode 100644 index 0000000000..680a853683 --- /dev/null +++ b/board/boundary/nitrogen6x/nitrogen6q.cfg @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +#include "ddr-setup.cfg" +#include "1066mhz_4x128mx16.cfg" +#include "clocks.cfg" diff --git a/board/boundary/nitrogen6x/nitrogen6q2g.cfg b/board/boundary/nitrogen6x/nitrogen6q2g.cfg new file mode 100644 index 0000000000..f57ab0eedf --- /dev/null +++ b/board/boundary/nitrogen6x/nitrogen6q2g.cfg @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +#include "ddr-setup.cfg" +#include "1066mhz_4x256mx16.cfg" +#include "clocks.cfg" diff --git a/board/boundary/nitrogen6x/nitrogen6s.cfg b/board/boundary/nitrogen6x/nitrogen6s.cfg new file mode 100644 index 0000000000..b5af5cc1b5 --- /dev/null +++ b/board/boundary/nitrogen6x/nitrogen6s.cfg @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +#include "ddr-setup.cfg" +#include "800mhz_2x128mx16.cfg" +#include "clocks.cfg" diff --git a/board/boundary/nitrogen6x/nitrogen6s1g.cfg b/board/boundary/nitrogen6x/nitrogen6s1g.cfg new file mode 100644 index 0000000000..5aeefc8783 --- /dev/null +++ b/board/boundary/nitrogen6x/nitrogen6s1g.cfg @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2013 Boundary Devices + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +#include "ddr-setup.cfg" +#include "800mhz_2x256mx16.cfg" +#include "clocks.cfg" diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c new file mode 100644 index 0000000000..229c237839 --- /dev/null +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -0,0 +1,895 @@ +/* + * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. + * Copyright (C) 2013, Boundary Devices <info@boundarydevices.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/sys_proto.h> +#include <malloc.h> +#include <asm/arch/mx6-pins.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/mxc_i2c.h> +#include <asm/imx-common/boot_mode.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <micrel.h> +#include <miiphy.h> +#include <netdev.h> +#include <linux/fb.h> +#include <ipu_pixfmt.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/mxc_hdmi.h> +#include <i2c.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +#define SPI_PAD_CTRL (PAD_CTL_HYS | \ + PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) + +#define BUTTON_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + +#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_ODE | PAD_CTL_SRE_FAST) + +#define WEAK_PULLUP (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_SRE_SLOW) + +#define WEAK_PULLDOWN (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ + PAD_CTL_SRE_SLOW) + +#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm) + +int dram_init(void) +{ + gd->ram_size = ((ulong)CONFIG_DDR_MB * 1024 * 1024); + + return 0; +} + +iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +iomux_v3_cfg_t const uart2_pads[] = { + MX6_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) + +/* I2C1, SGTL5000 */ +struct i2c_pads_info i2c_pad_info0 = { + .scl = { + .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC, + .gpio_mode = MX6_PAD_EIM_D21__GPIO_3_21 | PC, + .gp = IMX_GPIO_NR(3, 21) + }, + .sda = { + .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC, + .gpio_mode = MX6_PAD_EIM_D28__GPIO_3_28 | PC, + .gp = IMX_GPIO_NR(3, 28) + } +}; + +/* I2C2 Camera, MIPI */ +struct i2c_pads_info i2c_pad_info1 = { + .scl = { + .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC, + .gpio_mode = MX6_PAD_KEY_COL3__GPIO_4_12 | PC, + .gp = IMX_GPIO_NR(4, 12) + }, + .sda = { + .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC, + .gpio_mode = MX6_PAD_KEY_ROW3__GPIO_4_13 | PC, + .gp = IMX_GPIO_NR(4, 13) + } +}; + +/* I2C3, J15 - RGB connector */ +struct i2c_pads_info i2c_pad_info2 = { + .scl = { + .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC, + .gpio_mode = MX6_PAD_GPIO_5__GPIO_1_5 | PC, + .gp = IMX_GPIO_NR(1, 5) + }, + .sda = { + .i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | PC, + .gpio_mode = MX6_PAD_GPIO_16__GPIO_7_11 | PC, + .gp = IMX_GPIO_NR(7, 11) + } +}; + +iomux_v3_cfg_t const usdhc3_pads[] = { + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ +}; + +iomux_v3_cfg_t const usdhc4_pads[] = { + MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ +}; + +iomux_v3_cfg_t const enet_pads1[] = { + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + /* pin 35 - 1 (PHY_AD2) on reset */ + MX6_PAD_RGMII_RXC__GPIO_6_30 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 32 - 1 - (MODE0) all */ + MX6_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 31 - 1 - (MODE1) all */ + MX6_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 28 - 1 - (MODE2) all */ + MX6_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 27 - 1 - (MODE3) all */ + MX6_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */ + MX6_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL), + /* pin 42 PHY nRST */ + MX6_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_ENET_RXD0__GPIO_1_27 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +iomux_v3_cfg_t const enet_pads2[] = { + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), +}; + +/* wl1271 pads on nitrogen6x */ +iomux_v3_cfg_t const wl12xx_pads[] = { + (MX6_PAD_NANDF_CS1__GPIO_6_14 & ~MUX_PAD_CTRL_MASK) + | MUX_PAD_CTRL(WEAK_PULLDOWN), + (MX6_PAD_NANDF_CS2__GPIO_6_15 & ~MUX_PAD_CTRL_MASK) + | MUX_PAD_CTRL(OUTPUT_40OHM), + (MX6_PAD_NANDF_CS3__GPIO_6_16 & ~MUX_PAD_CTRL_MASK) + | MUX_PAD_CTRL(OUTPUT_40OHM), +}; +#define WL12XX_WL_IRQ_GP IMX_GPIO_NR(6, 14) +#define WL12XX_WL_ENABLE_GP IMX_GPIO_NR(6, 15) +#define WL12XX_BT_ENABLE_GP IMX_GPIO_NR(6, 16) + +/* Button assignments for J14 */ +static iomux_v3_cfg_t const button_pads[] = { + /* Menu */ + MX6_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Back */ + MX6_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Labelled Search (mapped to Power under Android) */ + MX6_PAD_NANDF_D3__GPIO_2_3 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Home */ + MX6_PAD_NANDF_D4__GPIO_2_4 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Volume Down */ + MX6_PAD_GPIO_19__GPIO_4_5 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Volume Up */ + MX6_PAD_GPIO_18__GPIO_7_13 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), +}; + +static void setup_iomux_enet(void) +{ + gpio_direction_output(IMX_GPIO_NR(3, 23), 0); /* SABRE Lite PHY rst */ + gpio_direction_output(IMX_GPIO_NR(1, 27), 0); /* Nitrogen6X PHY rst */ + gpio_direction_output(IMX_GPIO_NR(6, 30), 1); + gpio_direction_output(IMX_GPIO_NR(6, 25), 1); + gpio_direction_output(IMX_GPIO_NR(6, 27), 1); + gpio_direction_output(IMX_GPIO_NR(6, 28), 1); + gpio_direction_output(IMX_GPIO_NR(6, 29), 1); + imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1)); + gpio_direction_output(IMX_GPIO_NR(6, 24), 1); + + /* Need delay 10ms according to KSZ9021 spec */ + udelay(1000 * 10); + gpio_set_value(IMX_GPIO_NR(3, 23), 1); /* SABRE Lite PHY reset */ + gpio_set_value(IMX_GPIO_NR(1, 27), 1); /* Nitrogen6X PHY reset */ + + imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); +} + +iomux_v3_cfg_t const usb_pads[] = { + MX6_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); + imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); +} + +#ifdef CONFIG_USB_EHCI_MX6 +int board_ehci_hcd_init(int port) +{ + imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads)); + + /* Reset USB hub */ + gpio_direction_output(IMX_GPIO_NR(7, 12), 0); + mdelay(2); + gpio_set_value(IMX_GPIO_NR(7, 12), 1); + + return 0; +} +#endif + +#ifdef CONFIG_FSL_ESDHC +struct fsl_esdhc_cfg usdhc_cfg[2] = { + {USDHC3_BASE_ADDR}, + {USDHC4_BASE_ADDR}, +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret; + + if (cfg->esdhc_base == USDHC3_BASE_ADDR) { + gpio_direction_input(IMX_GPIO_NR(7, 0)); + ret = !gpio_get_value(IMX_GPIO_NR(7, 0)); + } else { + gpio_direction_input(IMX_GPIO_NR(2, 6)); + ret = !gpio_get_value(IMX_GPIO_NR(2, 6)); + } + + return ret; +} + +int board_mmc_init(bd_t *bis) +{ + s32 status = 0; + u32 index = 0; + + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); + + for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { + switch (index) { + case 0: + imx_iomux_v3_setup_multiple_pads( + usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + break; + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); + break; + default: + printf("Warning: you configured more USDHC controllers" + "(%d) then supported by the board (%d)\n", + index + 1, CONFIG_SYS_FSL_USDHC_NUM); + return status; + } + + status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); + } + + return status; +} +#endif + +u32 get_board_rev(void) +{ + return 0x63000; +} + +#ifdef CONFIG_MXC_SPI +iomux_v3_cfg_t const ecspi1_pads[] = { + /* SS1 */ + MX6_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), +}; + +void setup_spi(void) +{ + gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1); + imx_iomux_v3_setup_multiple_pads(ecspi1_pads, + ARRAY_SIZE(ecspi1_pads)); +} +#endif + +int board_phy_config(struct phy_device *phydev) +{ + /* min rx data delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x0); + /* min tx data delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x0); + /* max rx/tx clock delay, min rx/tx control */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf0f0); + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + uint32_t base = IMX_FEC_BASE; + struct mii_dev *bus = NULL; + struct phy_device *phydev = NULL; + int ret; + + setup_iomux_enet(); + +#ifdef CONFIG_FEC_MXC + bus = fec_get_miibus(base, -1); + if (!bus) + return 0; + /* scan phy 4,5,6,7 */ + phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII); + if (!phydev) { + free(bus); + return 0; + } + printf("using phy at %d\n", phydev->addr); + ret = fec_probe(bis, -1, base, bus, phydev); + if (ret) { + printf("FEC MXC: %s:failed\n", __func__); + free(phydev); + free(bus); + } +#endif + return 0; +} + +static void setup_buttons(void) +{ + imx_iomux_v3_setup_multiple_pads(button_pads, + ARRAY_SIZE(button_pads)); +} + +#ifdef CONFIG_CMD_SATA + +int setup_sata(void) +{ + struct iomuxc_base_regs *const iomuxc_regs + = (struct iomuxc_base_regs *) IOMUXC_BASE_ADDR; + int ret = enable_sata_clock(); + if (ret) + return ret; + + clrsetbits_le32(&iomuxc_regs->gpr[13], + IOMUXC_GPR13_SATA_MASK, + IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB + |IOMUXC_GPR13_SATA_PHY_7_SATA2M + |IOMUXC_GPR13_SATA_SPEED_3G + |(3<<IOMUXC_GPR13_SATA_PHY_6_SHIFT) + |IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED + |IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16 + |IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB + |IOMUXC_GPR13_SATA_PHY_2_TX_1P104V + |IOMUXC_GPR13_SATA_PHY_1_SLOW); + + return 0; +} +#endif + +#if defined(CONFIG_VIDEO_IPUV3) + +static iomux_v3_cfg_t const backlight_pads[] = { + /* Backlight on RGB connector: J15 */ + MX6_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL), +#define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21) + + /* Backlight on LVDS connector: J6 */ + MX6_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL), +#define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18) +}; + +static iomux_v3_cfg_t const rgb_pads[] = { + MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, + MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15, + MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2, + MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3, + MX6_PAD_DI0_PIN4__GPIO_4_20, + MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0, + MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1, + MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2, + MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3, + MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4, + MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5, + MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6, + MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7, + MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8, + MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9, + MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10, + MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11, + MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12, + MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13, + MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14, + MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15, + MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16, + MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17, + MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18, + MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19, + MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20, + MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21, + MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22, + MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23, +}; + +struct display_info_t { + int bus; + int addr; + int pixfmt; + int (*detect)(struct display_info_t const *dev); + void (*enable)(struct display_info_t const *dev); + struct fb_videomode mode; +}; + + +static int detect_hdmi(struct display_info_t const *dev) +{ + struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; + return readb(&hdmi->phy_stat0) & HDMI_PHY_HPD; +} + +static void enable_hdmi(struct display_info_t const *dev) +{ + struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; + u8 reg; + printf("%s: setup HDMI monitor\n", __func__); + reg = readb(&hdmi->phy_conf0); + reg |= HDMI_PHY_CONF0_PDZ_MASK; + writeb(reg, &hdmi->phy_conf0); + + udelay(3000); + reg |= HDMI_PHY_CONF0_ENTMDS_MASK; + writeb(reg, &hdmi->phy_conf0); + udelay(3000); + reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK; + writeb(reg, &hdmi->phy_conf0); + writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz); +} + +static int detect_i2c(struct display_info_t const *dev) +{ + return ((0 == i2c_set_bus_num(dev->bus)) + && + (0 == i2c_probe(dev->addr))); +} + +static void enable_lvds(struct display_info_t const *dev) +{ + struct iomuxc *iomux = (struct iomuxc *) + IOMUXC_BASE_ADDR; + u32 reg = readl(&iomux->gpr[2]); + reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT; + writel(reg, &iomux->gpr[2]); + gpio_direction_output(LVDS_BACKLIGHT_GP, 1); +} + +static void enable_rgb(struct display_info_t const *dev) +{ + imx_iomux_v3_setup_multiple_pads( + rgb_pads, + ARRAY_SIZE(rgb_pads)); + gpio_direction_output(RGB_BACKLIGHT_GP, 1); +} + +static struct display_info_t const displays[] = {{ + .bus = -1, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = detect_hdmi, + .enable = enable_hdmi, + .mode = { + .name = "HDMI", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, + .addr = 0x4, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = detect_i2c, + .enable = enable_lvds, + .mode = { + .name = "Hannstar-XGA", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, + .addr = 0x38, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = detect_i2c, + .enable = enable_lvds, + .mode = { + .name = "wsvga-lvds", + .refresh = 60, + .xres = 1024, + .yres = 600, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, + .addr = 0x48, + .pixfmt = IPU_PIX_FMT_RGB666, + .detect = detect_i2c, + .enable = enable_rgb, + .mode = { + .name = "wvga-rgb", + .refresh = 57, + .xres = 800, + .yres = 480, + .pixclock = 37037, + .left_margin = 40, + .right_margin = 60, + .upper_margin = 10, + .lower_margin = 10, + .hsync_len = 20, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +} } }; + +int board_video_skip(void) +{ + int i; + int ret; + char const *panel = getenv("panel"); + if (!panel) { + for (i = 0; i < ARRAY_SIZE(displays); i++) { + struct display_info_t const *dev = displays+i; + if (dev->detect(dev)) { + panel = dev->mode.name; + printf("auto-detected panel %s\n", panel); + break; + } + } + if (!panel) { + panel = displays[0].mode.name; + printf("No panel detected: default to %s\n", panel); + } + } else { + for (i = 0; i < ARRAY_SIZE(displays); i++) { + if (!strcmp(panel, displays[i].mode.name)) + break; + } + } + if (i < ARRAY_SIZE(displays)) { + ret = ipuv3_fb_init(&displays[i].mode, 0, + displays[i].pixfmt); + if (!ret) { + displays[i].enable(displays+i); + printf("Display: %s (%ux%u)\n", + displays[i].mode.name, + displays[i].mode.xres, + displays[i].mode.yres); + } else + printf("LCD %s cannot be configured: %d\n", + displays[i].mode.name, ret); + } else { + printf("unsupported panel %s\n", panel); + ret = -EINVAL; + } + return (0 != ret); +} + +static void setup_display(void) +{ + struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; + + int reg; + + /* Turn on LDB0,IPU,IPU DI0 clocks */ + reg = __raw_readl(&mxc_ccm->CCGR3); + reg |= MXC_CCM_CCGR3_IPU1_IPU_DI0_OFFSET + |MXC_CCM_CCGR3_LDB_DI0_MASK; + writel(reg, &mxc_ccm->CCGR3); + + /* Turn on HDMI PHY clock */ + reg = __raw_readl(&mxc_ccm->CCGR2); + reg |= MXC_CCM_CCGR2_HDMI_TX_IAHBCLK_MASK + |MXC_CCM_CCGR2_HDMI_TX_ISFRCLK_MASK; + writel(reg, &mxc_ccm->CCGR2); + + /* clear HDMI PHY reset */ + writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz); + + /* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */ + writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr); + writel(0x13<<ANATOP_PFD_480_PFD1_FRAC_SHIFT, &anatop->pfd_480_set); + + /* set LDB0, LDB1 clk select to 011/011 */ + reg = readl(&mxc_ccm->cs2cdr); + reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK + |MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK); + reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) + |(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET); + writel(reg, &mxc_ccm->cs2cdr); + + reg = readl(&mxc_ccm->cscmr2); + reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV; + writel(reg, &mxc_ccm->cscmr2); + + reg = readl(&mxc_ccm->chsccdr); + reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK + |MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK + |MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK); + reg |= (CHSCCDR_CLK_SEL_LDB_DI0 + <<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET) + |(CHSCCDR_PODF_DIVIDE_BY_3 + <<MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET) + |(CHSCCDR_IPU_PRE_CLK_540M_PFD + <<MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET); + writel(reg, &mxc_ccm->chsccdr); + + reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES + |IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH + |IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW + |IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG + |IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT + |IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG + |IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT + |IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED + |IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0; + writel(reg, &iomux->gpr[2]); + + reg = readl(&iomux->gpr[3]); + reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK) + | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 + <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET); + writel(reg, &iomux->gpr[3]); + + /* backlights off until needed */ + imx_iomux_v3_setup_multiple_pads(backlight_pads, + ARRAY_SIZE(backlight_pads)); + gpio_direction_input(LVDS_BACKLIGHT_GP); + gpio_direction_input(RGB_BACKLIGHT_GP); +} +#endif + +int board_early_init_f(void) +{ + setup_iomux_uart(); + + /* Disable wl1271 For Nitrogen6w */ + gpio_direction_input(WL12XX_WL_IRQ_GP); + gpio_direction_output(WL12XX_WL_ENABLE_GP, 0); + gpio_direction_output(WL12XX_BT_ENABLE_GP, 0); + + imx_iomux_v3_setup_multiple_pads(wl12xx_pads, ARRAY_SIZE(wl12xx_pads)); + setup_buttons(); + +#if defined(CONFIG_VIDEO_IPUV3) + setup_display(); +#endif + return 0; +} + +/* + * Do not overwrite the console + * Use always serial for U-Boot console + */ +int overwrite_console(void) +{ + return 1; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + +#ifdef CONFIG_MXC_SPI + setup_spi(); +#endif + setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); + setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); + +#ifdef CONFIG_CMD_SATA + setup_sata(); +#endif + + return 0; +} + +int checkboard(void) +{ + if (gpio_get_value(WL12XX_WL_IRQ_GP)) + puts("Board: Nitrogen6X\n"); + else + puts("Board: SABRE Lite\n"); + + return 0; +} + +struct button_key { + char const *name; + unsigned gpnum; + char ident; +}; + +static struct button_key const buttons[] = { + {"back", IMX_GPIO_NR(2, 2), 'B'}, + {"home", IMX_GPIO_NR(2, 4), 'H'}, + {"menu", IMX_GPIO_NR(2, 1), 'M'}, + {"search", IMX_GPIO_NR(2, 3), 'S'}, + {"volup", IMX_GPIO_NR(7, 13), 'V'}, + {"voldown", IMX_GPIO_NR(4, 5), 'v'}, +}; + +/* + * generate a null-terminated string containing the buttons pressed + * returns number of keys pressed + */ +static int read_keys(char *buf) +{ + int i, numpressed = 0; + for (i = 0; i < ARRAY_SIZE(buttons); i++) { + if (!gpio_get_value(buttons[i].gpnum)) + buf[numpressed++] = buttons[i].ident; + } + buf[numpressed] = '\0'; + return numpressed; +} + +static int do_kbd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + char envvalue[ARRAY_SIZE(buttons)+1]; + int numpressed = read_keys(envvalue); + setenv("keybd", envvalue); + return numpressed == 0; +} + +U_BOOT_CMD( + kbd, 1, 1, do_kbd, + "Tests for keypresses, sets 'keybd' environment variable", + "Returns 0 (true) to shell if key is pressed." +); + +#ifdef CONFIG_PREBOOT +static char const kbd_magic_prefix[] = "key_magic"; +static char const kbd_command_prefix[] = "key_cmd"; + +static void preboot_keys(void) +{ + int numpressed; + char keypress[ARRAY_SIZE(buttons)+1]; + numpressed = read_keys(keypress); + if (numpressed) { + char *kbd_magic_keys = getenv("magic_keys"); + char *suffix; + /* + * loop over all magic keys + */ + for (suffix = kbd_magic_keys; *suffix; ++suffix) { + char *keys; + char magic[sizeof(kbd_magic_prefix) + 1]; + sprintf(magic, "%s%c", kbd_magic_prefix, *suffix); + keys = getenv(magic); + if (keys) { + if (!strcmp(keys, keypress)) + break; + } + } + if (*suffix) { + char cmd_name[sizeof(kbd_command_prefix) + 1]; + char *cmd; + sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix); + cmd = getenv(cmd_name); + if (cmd) { + setenv("preboot", cmd); + return; + } + } + } +} +#endif + +#ifdef CONFIG_CMD_BMODE +static const struct boot_mode board_boot_modes[] = { + /* 4 bit bus width */ + {"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, + {"mmc1", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)}, + {NULL, 0}, +}; +#endif + +int misc_init_r(void) +{ +#ifdef CONFIG_PREBOOT + preboot_keys(); +#endif + +#ifdef CONFIG_CMD_BMODE + add_board_boot_modes(board_boot_modes); +#endif + return 0; +} diff --git a/board/chromebook-x86/dts/link.dts b/board/chromebook-x86/dts/link.dts index af60f59de7..ae8217d02e 100644 --- a/board/chromebook-x86/dts/link.dts +++ b/board/chromebook-x86/dts/link.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ "coreboot.dtsi" +/include/ ARCH_CPU_DTS / { #address-cells = <1>; diff --git a/board/cm4008/flash.c b/board/cm4008/flash.c index 5522bf085e..0faf197042 100644 --- a/board/cm4008/flash.c +++ b/board/cm4008/flash.c @@ -29,6 +29,7 @@ #include <common.h> #include <linux/byteorder/swab.h> +#include <asm/sections.h> flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ diff --git a/board/cm41xx/flash.c b/board/cm41xx/flash.c index 5522bf085e..0faf197042 100644 --- a/board/cm41xx/flash.c +++ b/board/cm41xx/flash.c @@ -29,6 +29,7 @@ #include <common.h> #include <linux/byteorder/swab.h> +#include <asm/sections.h> flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ diff --git a/board/cm_t35/Makefile b/board/cm_t35/Makefile index 894fa097e1..bde56e61f4 100644 --- a/board/cm_t35/Makefile +++ b/board/cm_t35/Makefile @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o +COBJS-$(CONFIG_LCD) += display.o COBJS := cm_t35.o leds.o $(COBJS-y) diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c index edbb941985..629ce4a505 100644 --- a/board/cm_t35/cm_t35.c +++ b/board/cm_t35/cm_t35.c @@ -33,7 +33,10 @@ #include <net.h> #include <i2c.h> #include <usb.h> +#include <mmc.h> +#include <nand.h> #include <twl4030.h> +#include <bmp_layout.h> #include <linux/compiler.h> #include <asm/io.h> @@ -75,6 +78,65 @@ static u32 gpmc_nand_config[GPMC_MAX_REG] = { 0, }; +#ifdef CONFIG_LCD +#ifdef CONFIG_CMD_NAND +static int splash_load_from_nand(u32 bmp_load_addr) +{ + struct bmp_header *bmp_hdr; + int res, splash_screen_nand_offset = 0x100000; + size_t bmp_size, bmp_header_size = sizeof(struct bmp_header); + + if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp) + goto splash_address_too_high; + + res = nand_read_skip_bad(&nand_info[nand_curr_device], + splash_screen_nand_offset, &bmp_header_size, + (u_char *)bmp_load_addr); + if (res < 0) + return res; + + bmp_hdr = (struct bmp_header *)bmp_load_addr; + bmp_size = le32_to_cpu(bmp_hdr->file_size); + + if (bmp_load_addr + bmp_size >= gd->start_addr_sp) + goto splash_address_too_high; + + return nand_read_skip_bad(&nand_info[nand_curr_device], + splash_screen_nand_offset, &bmp_size, + (u_char *)bmp_load_addr); + +splash_address_too_high: + printf("Error: splashimage address too high. Data overwrites U-Boot " + "and/or placed beyond DRAM boundaries.\n"); + + return -1; +} +#else +static inline int splash_load_from_nand(void) +{ + return -1; +} +#endif /* CONFIG_CMD_NAND */ + +int board_splash_screen_prepare(void) +{ + char *env_splashimage_value; + u32 bmp_load_addr; + + env_splashimage_value = getenv("splashimage"); + if (env_splashimage_value == NULL) + return -1; + + bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16); + if (bmp_load_addr == 0) { + printf("Error: bad splashimage address specified\n"); + return -1; + } + + return splash_load_from_nand(bmp_load_addr); +} +#endif /* CONFIG_LCD */ + /* * Routine: board_init * Description: hardware init. @@ -216,6 +278,9 @@ static void cm_t3x_set_common_muxconf(void) /* SB-T35 Ethernet */ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)); /*GPMC_nCS4*/ + /* DVI enable */ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPMC_nCS3*/ + /* CM-T3x Ethernet */ MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M0)); /*GPMC_nCS5*/ MUX_VAL(CP(GPMC_CLK), (IEN | PTD | DIS | M4)); /*GPIO_59*/ @@ -377,9 +442,19 @@ void set_muxconf_regs(void) } #ifdef CONFIG_GENERIC_MMC +int board_mmc_getcd(struct mmc *mmc) +{ + u8 val; + + if (twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, &val, TWL4030_BASEADD_GPIO)) + return -1; + + return !(val & 1); +} + int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, 59); } #endif diff --git a/board/cm_t35/display.c b/board/cm_t35/display.c new file mode 100644 index 0000000000..2f78bad6ea --- /dev/null +++ b/board/cm_t35/display.c @@ -0,0 +1,428 @@ +/* + * (C) Copyright 2012 CompuLab, Ltd. <www.compulab.co.il> + * + * Authors: Nikita Kiryanov <nikita@compulab.co.il> + * + * Parsing code based on linux/drivers/video/pxafb.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ +#include <common.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <stdio_dev.h> +#include <asm/arch/dss.h> +#include <lcd.h> +#include <asm/arch-omap3/dss.h> + +DECLARE_GLOBAL_DATA_PTR; + +enum display_type { + NONE, + DVI, + DVI_CUSTOM, +}; + +#define CMAP_ADDR 0x80100000 + +/* + * The frame buffer is allocated before we have the chance to parse user input. + * To make sure enough memory is allocated for all resolutions, we define + * vl_{col | row} to the maximal resolution supported by OMAP3. + */ +vidinfo_t panel_info = { + .vl_col = 1400, + .vl_row = 1050, + .vl_bpix = LCD_BPP, + .cmap = (ushort *)CMAP_ADDR, +}; + +static struct panel_config panel_cfg; +static enum display_type lcd_def; + +/* + * A note on DVI presets; + * U-Boot can convert 8 bit BMP data to 16 bit BMP data, and OMAP DSS can + * convert 16 bit data into 24 bit data. Thus, GFXFORMAT_RGB16 allows us to + * support two BMP types with one setting. + */ +static const struct panel_config preset_dvi_640X480 = { + .lcd_size = PANEL_LCD_SIZE(640, 480), + .timing_h = DSS_HBP(48) | DSS_HFP(16) | DSS_HSW(96), + .timing_v = DSS_VBP(33) | DSS_VFP(10) | DSS_VSW(2), + .divisor = 12 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_800X600 = { + .lcd_size = PANEL_LCD_SIZE(800, 600), + .timing_h = DSS_HBP(88) | DSS_HFP(40) | DSS_HSW(128), + .timing_v = DSS_VBP(23) | DSS_VFP(1) | DSS_VSW(4), + .divisor = 8 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1024X768 = { + .lcd_size = PANEL_LCD_SIZE(1024, 768), + .timing_h = DSS_HBP(160) | DSS_HFP(24) | DSS_HSW(136), + .timing_v = DSS_VBP(29) | DSS_VFP(3) | DSS_VSW(6), + .divisor = 5 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1152X864 = { + .lcd_size = PANEL_LCD_SIZE(1152, 864), + .timing_h = DSS_HBP(256) | DSS_HFP(64) | DSS_HSW(128), + .timing_v = DSS_VBP(32) | DSS_VFP(1) | DSS_VSW(3), + .divisor = 3 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1280X960 = { + .lcd_size = PANEL_LCD_SIZE(1280, 960), + .timing_h = DSS_HBP(312) | DSS_HFP(96) | DSS_HSW(112), + .timing_v = DSS_VBP(36) | DSS_VFP(1) | DSS_VSW(3), + .divisor = 3 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +static const struct panel_config preset_dvi_1280X1024 = { + .lcd_size = PANEL_LCD_SIZE(1280, 1024), + .timing_h = DSS_HBP(248) | DSS_HFP(48) | DSS_HSW(112), + .timing_v = DSS_VBP(38) | DSS_VFP(1) | DSS_VSW(3), + .divisor = 3 | (1 << 16), + .data_lines = LCD_INTERFACE_24_BIT, + .panel_type = ACTIVE_DISPLAY, + .load_mode = 2, + .gfx_format = GFXFORMAT_RGB16, +}; + +/* + * set_resolution_params() + * + * Due to usage of multiple display related APIs resolution data is located in + * more than one place. This function updates them all. + */ +static void set_resolution_params(int x, int y) +{ + panel_cfg.lcd_size = PANEL_LCD_SIZE(x, y); + panel_info.vl_col = x; + panel_info.vl_row = y; + lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; +} + +static void set_preset(const struct panel_config preset, int x_res, int y_res) +{ + panel_cfg = preset; + set_resolution_params(x_res, y_res); +} + +static enum display_type set_dvi_preset(const struct panel_config preset, + int x_res, int y_res) +{ + set_preset(preset, x_res, y_res); + return DVI; +} + +/* + * parse_mode() - parse the mode parameter of custom lcd settings + * + * @mode: <res_x>x<res_y> + * + * Returns -1 on error, 0 on success. + */ +static int parse_mode(const char *mode) +{ + unsigned int modelen = strlen(mode); + int res_specified = 0; + unsigned int xres = 0, yres = 0; + int yres_specified = 0; + int i; + + for (i = modelen - 1; i >= 0; i--) { + switch (mode[i]) { + case 'x': + if (!yres_specified) { + yres = simple_strtoul(&mode[i + 1], NULL, 0); + yres_specified = 1; + } else { + goto done_parsing; + } + + break; + case '0' ... '9': + break; + default: + goto done_parsing; + } + } + + if (i < 0 && yres_specified) { + xres = simple_strtoul(mode, NULL, 0); + res_specified = 1; + } + +done_parsing: + if (res_specified) { + set_resolution_params(xres, yres); + } else { + printf("LCD: invalid mode: %s\n", mode); + return -1; + } + + return 0; +} + +#define PIXEL_CLK_NUMERATOR (26 * 432 / 39) +/* + * parse_pixclock() - Parse the pixclock parameter of custom lcd settings + * + * @pixclock: the desired pixel clock + * + * Returns -1 on error, 0 on success. + * + * Handling the pixel_clock: + * + * Pixel clock is defined in the OMAP35x TRM as follows: + * pixel_clock = + * (SYS_CLK * 2 * PRCM.CM_CLKSEL2_PLL[18:8]) / + * (DSS.DISPC_DIVISOR[23:16] * DSS.DISPC_DIVISOR[6:0] * + * PRCM.CM_CLKSEL_DSS[4:0] * (PRCM.CM_CLKSEL2_PLL[6:0] + 1)) + * + * In practice, this means that in order to set the + * divisor for the desired pixel clock one needs to + * solve the following equation: + * + * 26 * 432 / (39 * <pixel_clock>) = DSS.DISPC_DIVISOR[6:0] + * + * NOTE: the explicit equation above is reduced. Do not + * try to infer anything from these numbers. + */ +static int parse_pixclock(char *pixclock) +{ + int divisor, pixclock_val; + char *pixclk_start = pixclock; + + pixclock_val = simple_strtoul(pixclock, &pixclock, 10); + divisor = DIV_ROUND_UP(PIXEL_CLK_NUMERATOR, pixclock_val); + /* 0 and 1 are illegal values for PCD */ + if (divisor <= 1) + divisor = 2; + + panel_cfg.divisor = divisor | (1 << 16); + if (pixclock[0] != '\0') { + printf("LCD: invalid value for pixclock:%s\n", pixclk_start); + return -1; + } + + return 0; +} + +/* + * parse_setting() - parse a single setting of custom lcd parameters + * + * @setting: The custom lcd setting <name>:<value> + * + * Returns -1 on failure, 0 on success. + */ +static int parse_setting(char *setting) +{ + int num_val; + char *setting_start = setting; + + if (!strncmp(setting, "mode:", 5)) { + return parse_mode(setting + 5); + } else if (!strncmp(setting, "pixclock:", 9)) { + return parse_pixclock(setting + 9); + } else if (!strncmp(setting, "left:", 5)) { + num_val = simple_strtoul(setting + 5, &setting, 0); + panel_cfg.timing_h |= DSS_HBP(num_val); + } else if (!strncmp(setting, "right:", 6)) { + num_val = simple_strtoul(setting + 6, &setting, 0); + panel_cfg.timing_h |= DSS_HFP(num_val); + } else if (!strncmp(setting, "upper:", 6)) { + num_val = simple_strtoul(setting + 6, &setting, 0); + panel_cfg.timing_v |= DSS_VBP(num_val); + } else if (!strncmp(setting, "lower:", 6)) { + num_val = simple_strtoul(setting + 6, &setting, 0); + panel_cfg.timing_v |= DSS_VFP(num_val); + } else if (!strncmp(setting, "hsynclen:", 9)) { + num_val = simple_strtoul(setting + 9, &setting, 0); + panel_cfg.timing_h |= DSS_HSW(num_val); + } else if (!strncmp(setting, "vsynclen:", 9)) { + num_val = simple_strtoul(setting + 9, &setting, 0); + panel_cfg.timing_v |= DSS_VSW(num_val); + } else if (!strncmp(setting, "hsync:", 6)) { + if (simple_strtoul(setting + 6, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IHS; + else + panel_cfg.pol_freq &= ~DSS_IHS; + } else if (!strncmp(setting, "vsync:", 6)) { + if (simple_strtoul(setting + 6, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IVS; + else + panel_cfg.pol_freq &= ~DSS_IVS; + } else if (!strncmp(setting, "outputen:", 9)) { + if (simple_strtoul(setting + 9, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IEO; + else + panel_cfg.pol_freq &= ~DSS_IEO; + } else if (!strncmp(setting, "pixclockpol:", 12)) { + if (simple_strtoul(setting + 12, &setting, 0) == 0) + panel_cfg.pol_freq |= DSS_IPC; + else + panel_cfg.pol_freq &= ~DSS_IPC; + } else if (!strncmp(setting, "active", 6)) { + panel_cfg.panel_type = ACTIVE_DISPLAY; + return 0; /* Avoid sanity check below */ + } else if (!strncmp(setting, "passive", 7)) { + panel_cfg.panel_type = PASSIVE_DISPLAY; + return 0; /* Avoid sanity check below */ + } else if (!strncmp(setting, "display:", 8)) { + if (!strncmp(setting + 8, "dvi", 3)) { + lcd_def = DVI_CUSTOM; + return 0; /* Avoid sanity check below */ + } + } else { + printf("LCD: unknown option %s\n", setting_start); + return -1; + } + + if (setting[0] != '\0') { + printf("LCD: invalid value for %s\n", setting_start); + return -1; + } + + return 0; +} + +/* + * env_parse_customlcd() - parse custom lcd params from an environment variable. + * + * @custom_lcd_params: The environment variable containing the lcd params. + * + * Returns -1 on failure, 0 on success. + */ +static int parse_customlcd(char *custom_lcd_params) +{ + char params_cpy[160]; + char *setting; + + strncpy(params_cpy, custom_lcd_params, 160); + setting = strtok(params_cpy, ","); + while (setting) { + if (parse_setting(setting) < 0) + return -1; + + setting = strtok(NULL, ","); + } + + /* Currently we don't support changing this via custom lcd params */ + panel_cfg.data_lines = LCD_INTERFACE_24_BIT; + panel_cfg.gfx_format = GFXFORMAT_RGB16; /* See dvi predefines note */ + + return 0; +} + +/* + * env_parse_displaytype() - parse display type. + * + * Parses the environment variable "displaytype", which contains the + * name of the display type or preset, in which case it applies its + * configurations. + * + * Returns the type of display that was specified. + */ +static enum display_type env_parse_displaytype(char *displaytype) +{ + if (!strncmp(displaytype, "dvi640x480", 10)) + return set_dvi_preset(preset_dvi_640X480, 640, 480); + else if (!strncmp(displaytype, "dvi800x600", 10)) + return set_dvi_preset(preset_dvi_800X600, 800, 600); + else if (!strncmp(displaytype, "dvi1024x768", 11)) + return set_dvi_preset(preset_dvi_1024X768, 1024, 768); + else if (!strncmp(displaytype, "dvi1152x864", 11)) + return set_dvi_preset(preset_dvi_1152X864, 1152, 864); + else if (!strncmp(displaytype, "dvi1280x960", 11)) + return set_dvi_preset(preset_dvi_1280X960, 1280, 960); + else if (!strncmp(displaytype, "dvi1280x1024", 12)) + return set_dvi_preset(preset_dvi_1280X1024, 1280, 1024); + + return NONE; +} + +int lcd_line_length; +int lcd_color_fg; +int lcd_color_bg; +void *lcd_base; +short console_col; +short console_row; +void *lcd_console_address; + +void lcd_ctrl_init(void *lcdbase) +{ + struct prcm *prcm = (struct prcm *)PRCM_BASE; + char *custom_lcd; + char *displaytype = getenv("displaytype"); + + if (displaytype == NULL) + return; + + lcd_def = env_parse_displaytype(displaytype); + /* If we did not recognize the preset, check if it's an env variable */ + if (lcd_def == NONE) { + custom_lcd = getenv(displaytype); + if (custom_lcd == NULL || parse_customlcd(custom_lcd) < 0) + return; + } + + panel_cfg.frame_buffer = lcdbase; + omap3_dss_panel_config(&panel_cfg); + /* + * Pixel clock is defined with many divisions and only few + * multiplications of the system clock. Since DSS FCLK divisor is set + * to 16 by default, we need to set it to a smaller value, like 3 + * (chosen via trial and error). + */ + clrsetbits_le32(&prcm->clksel_dss, 0xF, 3); +} + +void lcd_enable(void) +{ + if (lcd_def == DVI || lcd_def == DVI_CUSTOM) { + gpio_direction_output(54, 0); /* Turn on DVI */ + omap3_dss_enable(); + } +} + +void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) {} diff --git a/board/cobra5272/u-boot.lds b/board/cobra5272/u-boot.lds index d054f20bce..809a7055fd 100644 --- a/board/cobra5272/u-boot.lds +++ b/board/cobra5272/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -96,6 +96,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/cogent/u-boot.lds b/board/cogent/u-boot.lds index 2a6027f814..1f006d7867 100644 --- a/board/cogent/u-boot.lds +++ b/board/cogent/u-boot.lds @@ -73,7 +73,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -97,6 +97,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/cogent/u-boot.lds.debug b/board/cogent/u-boot.lds.debug index dc8c4e958f..e88bd977d9 100644 --- a/board/cogent/u-boot.lds.debug +++ b/board/cogent/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c index c6c10717b7..2dca275d15 100644 --- a/board/comelit/dig297/dig297.c +++ b/board/comelit/dig297/dig297.c @@ -147,8 +147,7 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/compal/dts/tegra20-paz00.dts b/board/compal/dts/tegra20-paz00.dts index 31b064d418..780203cfb3 100644 --- a/board/compal/dts/tegra20-paz00.dts +++ b/board/compal/dts/tegra20-paz00.dts @@ -1,13 +1,15 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20.dtsi" / { - model = "Toshiba AC100 / Dynabook AZ"; - compatible = "compal,paz00", "nvidia,tegra20"; + model = "Toshiba AC100 / Dynabook AZ"; + compatible = "compal,paz00", "nvidia,tegra20"; aliases { usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000000"; }; memory { @@ -53,6 +55,19 @@ status = "disabled"; }; + sdhci@c8000000 { + status = "okay"; + cd-gpios = <&gpio 173 1>; /* gpio PV5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 169 0>; /* gpio PV1 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <8>; + }; + lcd_panel: panel { /* PAZ00 has 1024x600 */ clock = <54030000>; diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c index 1447f47605..d6e5c3740e 100644 --- a/board/compal/paz00/paz00.c +++ b/board/compal/paz00/paz00.c @@ -18,19 +18,14 @@ #include <asm/io.h> #include <asm/arch/tegra.h> #include <asm/arch/pinmux.h> -#include <asm/arch-tegra/mmc.h> #include <asm/gpio.h> -#ifdef CONFIG_TEGRA_MMC -#include <mmc.h> -#endif - #ifdef CONFIG_TEGRA_MMC /* * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) */ -static void pin_mux_mmc(void) +void pin_mux_mmc(void) { /* SDMMC4: config 3, x8 on 2nd set of pins */ pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4); @@ -51,25 +46,6 @@ static void pin_mux_mmc(void) /* For CD GPIO PV5 */ pinmux_tristate_disable(PINGRP_GPV); } - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) -{ - debug("board_mmc_init called\n"); - - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - debug("board_mmc_init: init eMMC\n"); - /* init dev 0, eMMC chip, with 8-bit bus */ - tegra_mmc_init(0, 8, -1, -1); - - debug("board_mmc_init: init SD slot\n"); - /* init dev 3, SD slot, with 4-bit bus */ - tegra_mmc_init(3, 4, GPIO_PV1, GPIO_PV5); - - return 0; -} #endif #ifdef CONFIG_LCD diff --git a/board/compulab/dts/tegra20-trimslice.dts b/board/compulab/dts/tegra20-trimslice.dts index 7aeed670db..ee31476c1e 100644 --- a/board/compulab/dts/tegra20-trimslice.dts +++ b/board/compulab/dts/tegra20-trimslice.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20.dtsi" / { model = "Compulab TrimSlice board"; @@ -9,6 +9,8 @@ aliases { usb0 = "/usb@c5008000"; usb1 = "/usb@c5000000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000000"; }; memory { @@ -47,4 +49,16 @@ usb@c5004000 { status = "disabled"; }; + + sdhci@c8000000 { + status = "okay"; + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + cd-gpios = <&gpio 121 1>; /* gpio PP1 */ + wp-gpios = <&gpio 122 0>; /* gpio PP2 */ + bus-width = <4>; + }; }; diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c index 8f4dd09faa..8401100b18 100644 --- a/board/compulab/trimslice/trimslice.c +++ b/board/compulab/trimslice/trimslice.c @@ -27,12 +27,8 @@ #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> -#include <asm/arch-tegra/mmc.h> #include <asm/gpio.h> #include <i2c.h> -#ifdef CONFIG_TEGRA_MMC -#include <mmc.h> -#endif void pin_mux_usb(void) { @@ -52,7 +48,7 @@ void pin_mux_spi(void) * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) */ -static void pin_mux_mmc(void) +void pin_mux_mmc(void) { funcmux_select(PERIPH_ID_SDMMC1, FUNCMUX_SDMMC1_SDIO1_4BIT); funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT); @@ -60,20 +56,3 @@ static void pin_mux_mmc(void) /* For CD GPIO PP1 */ pinmux_tristate_disable(PINGRP_DAP3); } - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) -{ - debug("board_mmc_init called\n"); - - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - /* init dev 0 (SDMMC4), (micro-SD slot) with 4-bit bus */ - tegra_mmc_init(0, 4, -1, GPIO_PP1); - - /* init dev 3 (SDMMC1), (SD slot) with 4-bit bus */ - tegra_mmc_init(3, 4, -1, -1); - - return 0; -} diff --git a/board/corscience/tricorder/tricorder.c b/board/corscience/tricorder/tricorder.c index 56fe495277..5c02eaf2ec 100644 --- a/board/corscience/tricorder/tricorder.c +++ b/board/corscience/tricorder/tricorder.c @@ -80,7 +80,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !(defined(CONFIG_SPL_BUILD)) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/cray/L1/u-boot.lds.debug b/board/cray/L1/u-boot.lds.debug index d7a2e56008..99cbed4b47 100644 --- a/board/cray/L1/u-boot.lds.debug +++ b/board/cray/L1/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds index 8a306d6076..663100e580 100644 --- a/board/dave/PPChameleonEVB/u-boot.lds +++ b/board/dave/PPChameleonEVB/u-boot.lds @@ -77,7 +77,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -126,6 +126,6 @@ SECTIONS } :bss . = ALIGN(4); - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/davedenx/aria/aria.c b/board/davedenx/aria/aria.c index 31b079b1c3..2290257358 100644 --- a/board/davedenx/aria/aria.c +++ b/board/davedenx/aria/aria.c @@ -35,70 +35,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* Clocks in use */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_NFC_EN | \ - CLOCK_SCCR1_PATA_EN | \ - CLOCK_SCCR1_PCI_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_SPDIF_EN | \ - CLOCK_SCCR2_DIU_EN | \ - CLOCK_SCCR2_I2C_EN) - -int board_early_init_f(void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - u32 spridr; - - /* - * Initialize Local Window for the On Board FPGA access - */ - out_be32(&im->sysconf.lpcs2aw, - CSAW_START(CONFIG_SYS_ARIA_FPGA_BASE) | - CSAW_STOP(CONFIG_SYS_ARIA_FPGA_BASE, CONFIG_SYS_ARIA_FPGA_SIZE) - ); - out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG); - sync_law(&im->sysconf.lpcs2aw); - - /* - * Initialize Local Window for the On Board SRAM access - */ - out_be32(&im->sysconf.lpcs6aw, - CSAW_START(CONFIG_SYS_ARIA_SRAM_BASE) | - CSAW_STOP(CONFIG_SYS_ARIA_SRAM_BASE, CONFIG_SYS_ARIA_SRAM_SIZE) - ); - out_be32(&im->lpc.cs_cfg[6], CONFIG_SYS_CS6_CFG); - sync_law(&im->sysconf.lpcs6aw); - - /* - * Configure Flash Speed - */ - out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG); - - spridr = in_be32(&im->sysconf.spridr); - - if (SVR_MJREV(spridr) >= 2) - out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING); - - /* - * Enable clocks - */ - out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN); - out_be32(&im->clk.sccr[1], SCCR2_CLOCKS_EN); -#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE) - setbits_be32(&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN); -#endif - - return 0; -} - phys_size_t initdram (int board_type) { return fixed_sdram(NULL, NULL, 0); diff --git a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds index c5fd93c0f7..bc34fb5819 100644 --- a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds +++ b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds @@ -49,11 +49,6 @@ SECTIONS .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } >.sram - - . = ALIGN(4); .rel.dyn : { __rel_dyn_start = .; *(.rel*) @@ -71,7 +66,7 @@ SECTIONS __bss_start = .; *(.bss*) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } >.sram __image_copy_end = .; diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds index 86dc172ee2..2557830f94 100644 --- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds +++ b/board/davinci/da8xxevm/u-boot-spl-hawk.lds @@ -58,11 +58,6 @@ SECTIONS } . = ALIGN(4); - .u_boot_list : { - #include <u-boot.lst> - } - - . = ALIGN(4); __rel_dyn_start = .; __rel_dyn_end = .; __dynsym_start = .; @@ -79,7 +74,7 @@ SECTIONS __bss_start = .; *(.bss*) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } _end = .; diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c index d93efafad0..aff7c1fe5e 100644 --- a/board/denx/m28evk/m28evk.c +++ b/board/denx/m28evk/m28evk.c @@ -57,6 +57,10 @@ int board_early_init_f(void) mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 | MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP); gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0); + + mxs_iomux_setup_pad(MX28_PAD_AUART3_RX__GPIO_3_12 | + MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP); + gpio_direction_output(MX28_PAD_AUART3_RX__GPIO_3_12, 0); #endif return 0; diff --git a/board/dvlhost/u-boot.lds b/board/dvlhost/u-boot.lds index 1bd1700aa2..b13d3e1ec3 100644 --- a/board/dvlhost/u-boot.lds +++ b/board/dvlhost/u-boot.lds @@ -57,7 +57,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN (4); @@ -72,13 +72,21 @@ SECTIONS *(.dynsym) } - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; + _end = .; + + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { *(.bss*) . = ALIGN(4); - _end = .; + __bss_end = .; } - __bss_end__ =.; + .bss_end __bss_end (OVERLAY) : { + KEEP(*(__bss_end)); + } + /DISCARD/ : { *(.dynstr*) } /DISCARD/ : { *(.dynamic*) } /DISCARD/ : { *(.plt*) } diff --git a/board/eltec/mhpc/u-boot.lds b/board/eltec/mhpc/u-boot.lds index c8d38942c9..a1481c8699 100644 --- a/board/eltec/mhpc/u-boot.lds +++ b/board/eltec/mhpc/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/eltec/mhpc/u-boot.lds.debug b/board/eltec/mhpc/u-boot.lds.debug index 92796e6744..614bbb20b6 100644 --- a/board/eltec/mhpc/u-boot.lds.debug +++ b/board/eltec/mhpc/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/emk/top860/u-boot.lds b/board/emk/top860/u-boot.lds index 22626d392a..e3f7d809b6 100644 --- a/board/emk/top860/u-boot.lds +++ b/board/emk/top860/u-boot.lds @@ -70,7 +70,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -94,6 +94,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/ep88x/u-boot.lds b/board/ep88x/u-boot.lds index 1dcc22a191..c00b3c39f8 100644 --- a/board/ep88x/u-boot.lds +++ b/board/ep88x/u-boot.lds @@ -65,7 +65,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -89,7 +89,7 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } ENTRY(_start) diff --git a/board/esd/dasa_sim/u-boot.lds b/board/esd/dasa_sim/u-boot.lds index 7eca18390b..4297b8ba05 100644 --- a/board/esd/dasa_sim/u-boot.lds +++ b/board/esd/dasa_sim/u-boot.lds @@ -76,7 +76,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -100,6 +100,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c index 748ad7cec6..e38678fc29 100644 --- a/board/esd/mecp5123/mecp5123.c +++ b/board/esd/mecp5123/mecp5123.c @@ -33,20 +33,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* Clocks in use */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_NFC_EN | \ - CLOCK_SCCR1_PCI_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_I2C_EN) - int eeprom_write_enable(unsigned dev_addr, int state) { volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; @@ -65,18 +51,9 @@ int eeprom_write_enable(unsigned dev_addr, int state) int board_early_init_f(void) { volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - u32 spridr; int i; /* - * Initialize Local Window for NOR FLASH access - */ - out_be32(&im->sysconf.lpcs0aw, - CSAW_START(CONFIG_SYS_FLASH_BASE) | - CSAW_STOP(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE)); - sync_law(&im->sysconf.lpcs0aw); - - /* * Initialize Local Window for boot access */ out_be32(&im->sysconf.lpbaw, @@ -84,37 +61,6 @@ int board_early_init_f(void) sync_law(&im->sysconf.lpbaw); /* - * Initialize Local Window for VPC3 access - */ - out_be32(&im->sysconf.lpcs1aw, - CSAW_START(CONFIG_SYS_VPC3_BASE) | - CSAW_STOP(CONFIG_SYS_VPC3_BASE, CONFIG_SYS_VPC3_SIZE)); - sync_law(&im->sysconf.lpcs1aw); - - /* - * Configure Flash Speed - */ - out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG); - - /* - * Configure VPC3 Speed - */ - out_be32(&im->lpc.cs_cfg[1], CONFIG_SYS_CS1_CFG); - - spridr = in_be32(&im->sysconf.spridr); - if (SVR_MJREV(spridr) >= 2) - out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING); - - /* - * Enable clocks - */ - out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN); - out_be32(&im->clk.sccr[1], SCCR2_CLOCKS_EN); -#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE) - setbits_be32(&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN); -#endif - - /* * Configure MSCAN clocks */ for (i=0; i<4; ++i) { diff --git a/board/esd/pmc440/u-boot-nand.lds b/board/esd/pmc440/u-boot-nand.lds index ca7df4592e..6a5cef6c8c 100644 --- a/board/esd/pmc440/u-boot-nand.lds +++ b/board/esd/pmc440/u-boot-nand.lds @@ -104,7 +104,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -129,6 +129,6 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/esd/tasreg/u-boot.lds b/board/esd/tasreg/u-boot.lds index 0d6a0f3a3b..a4d9da7aaf 100644 --- a/board/esd/tasreg/u-boot.lds +++ b/board/esd/tasreg/u-boot.lds @@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -93,6 +93,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/esteem192e/u-boot.lds b/board/esteem192e/u-boot.lds index fe5cf095fc..642f1c9ecf 100644 --- a/board/esteem192e/u-boot.lds +++ b/board/esteem192e/u-boot.lds @@ -77,7 +77,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -101,6 +101,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/evb64260/u-boot.lds b/board/evb64260/u-boot.lds index eac9c070e3..44c61eb82c 100644 --- a/board/evb64260/u-boot.lds +++ b/board/evb64260/u-boot.lds @@ -73,7 +73,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -97,6 +97,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/fads/u-boot.lds b/board/fads/u-boot.lds index 6022dbce72..0e2206c222 100644 --- a/board/fads/u-boot.lds +++ b/board/fads/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -95,7 +95,7 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } ENTRY(_start) diff --git a/board/flagadm/u-boot.lds b/board/flagadm/u-boot.lds index c8d38942c9..a1481c8699 100644 --- a/board/flagadm/u-boot.lds +++ b/board/flagadm/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/flagadm/u-boot.lds.debug b/board/flagadm/u-boot.lds.debug index 92796e6744..614bbb20b6 100644 --- a/board/flagadm/u-boot.lds.debug +++ b/board/flagadm/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg index c86cd407a2..f4cae5eeb9 100644 --- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg @@ -109,12 +109,12 @@ DATA 4 0x021b4828 0x33333333 DATA 4 0x021b0018 0x00081740 DATA 4 0x021b001c 0x00008000 -DATA 4 0x021b000c 0x555A7975 -DATA 4 0x021b0010 0xFF538E64 +DATA 4 0x021b000c 0x555A7974 +DATA 4 0x021b0010 0xDB538F64 DATA 4 0x021b0014 0x01FF00DB DATA 4 0x021b002c 0x000026D2 -DATA 4 0x021b0030 0x005B0E21 +DATA 4 0x021b0030 0x005A1023 DATA 4 0x021b0008 0x09444040 DATA 4 0x021b0004 0x00025576 DATA 4 0x021b0040 0x00000027 @@ -126,8 +126,8 @@ DATA 4 0x021b001c 0x00008033 DATA 4 0x021b001c 0x0000803B DATA 4 0x021b001c 0x00428031 DATA 4 0x021b001c 0x00428039 -DATA 4 0x021b001c 0x09408030 -DATA 4 0x021b001c 0x09408038 +DATA 4 0x021b001c 0x19308030 +DATA 4 0x021b001c 0x19308038 DATA 4 0x021b001c 0x04008040 DATA 4 0x021b001c 0x04008048 diff --git a/board/freescale/m5208evbe/u-boot.lds b/board/freescale/m5208evbe/u-boot.lds index 2c151f20f5..6f80e41159 100644 --- a/board/freescale/m5208evbe/u-boot.lds +++ b/board/freescale/m5208evbe/u-boot.lds @@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -97,6 +97,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.lds index dbd6f6ab20..9db171ed4e 100644 --- a/board/freescale/m52277evb/u-boot.lds +++ b/board/freescale/m52277evb/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -96,6 +96,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m5235evb/u-boot.lds index 00932ae68d..f11d4831be 100644 --- a/board/freescale/m5235evb/u-boot.lds +++ b/board/freescale/m5235evb/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -96,6 +96,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m5249evb/u-boot.lds b/board/freescale/m5249evb/u-boot.lds index d054f20bce..809a7055fd 100644 --- a/board/freescale/m5249evb/u-boot.lds +++ b/board/freescale/m5249evb/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -96,6 +96,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m5253demo/u-boot.lds b/board/freescale/m5253demo/u-boot.lds index f8116f601e..9de88852ab 100644 --- a/board/freescale/m5253demo/u-boot.lds +++ b/board/freescale/m5253demo/u-boot.lds @@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -97,6 +97,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m5253evbe/u-boot.lds b/board/freescale/m5253evbe/u-boot.lds index d054f20bce..809a7055fd 100644 --- a/board/freescale/m5253evbe/u-boot.lds +++ b/board/freescale/m5253evbe/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -96,6 +96,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m5271evb/u-boot.lds b/board/freescale/m5271evb/u-boot.lds index 133ec01036..82b67d50a9 100644 --- a/board/freescale/m5271evb/u-boot.lds +++ b/board/freescale/m5271evb/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -96,6 +96,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m5272c3/u-boot.lds b/board/freescale/m5272c3/u-boot.lds index d054f20bce..809a7055fd 100644 --- a/board/freescale/m5272c3/u-boot.lds +++ b/board/freescale/m5272c3/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -96,6 +96,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m5275evb/u-boot.lds b/board/freescale/m5275evb/u-boot.lds index fc68de1ba1..fda4cf426d 100644 --- a/board/freescale/m5275evb/u-boot.lds +++ b/board/freescale/m5275evb/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -96,6 +96,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m5282evb/u-boot.lds b/board/freescale/m5282evb/u-boot.lds index ad49874c5a..cdfd0e4164 100644 --- a/board/freescale/m5282evb/u-boot.lds +++ b/board/freescale/m5282evb/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -96,6 +96,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m53017evb/u-boot.lds b/board/freescale/m53017evb/u-boot.lds index d25a36f651..c40c565922 100644 --- a/board/freescale/m53017evb/u-boot.lds +++ b/board/freescale/m53017evb/u-boot.lds @@ -74,7 +74,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -99,6 +99,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m5329evb/u-boot.lds b/board/freescale/m5329evb/u-boot.lds index 6616594e7b..f803e4af05 100644 --- a/board/freescale/m5329evb/u-boot.lds +++ b/board/freescale/m5329evb/u-boot.lds @@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -97,6 +97,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m5373evb/u-boot.lds b/board/freescale/m5373evb/u-boot.lds index bc40fd649d..264e43f54d 100644 --- a/board/freescale/m5373evb/u-boot.lds +++ b/board/freescale/m5373evb/u-boot.lds @@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -97,6 +97,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m54418twr/u-boot.lds b/board/freescale/m54418twr/u-boot.lds index 36a4c264b9..3247dbf6d1 100644 --- a/board/freescale/m54418twr/u-boot.lds +++ b/board/freescale/m54418twr/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -94,6 +94,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m54451evb/u-boot.lds b/board/freescale/m54451evb/u-boot.lds index 91328a4af6..fd1289ec87 100644 --- a/board/freescale/m54451evb/u-boot.lds +++ b/board/freescale/m54451evb/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -94,6 +94,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m54455evb/u-boot.lds index 36a4c264b9..3247dbf6d1 100644 --- a/board/freescale/m54455evb/u-boot.lds +++ b/board/freescale/m54455evb/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -94,6 +94,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m547xevb/u-boot.lds b/board/freescale/m547xevb/u-boot.lds index de4d0eb907..bbe36f087a 100644 --- a/board/freescale/m547xevb/u-boot.lds +++ b/board/freescale/m547xevb/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -94,6 +94,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/m548xevb/u-boot.lds b/board/freescale/m548xevb/u-boot.lds index fbbe0c5dc5..9315927761 100644 --- a/board/freescale/m548xevb/u-boot.lds +++ b/board/freescale/m548xevb/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -94,6 +94,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c index 97eeab3a23..33a8aa5184 100644 --- a/board/freescale/mpc5121ads/mpc5121ads.c +++ b/board/freescale/mpc5121ads/mpc5121ads.c @@ -38,25 +38,6 @@ DECLARE_GLOBAL_DATA_PTR; -/* Clocks in use */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_NFC_EN | \ - CLOCK_SCCR1_PATA_EN | \ - CLOCK_SCCR1_PCI_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_DIU_EN | \ - CLOCK_SCCR2_I2C_EN | \ - CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_SPDIF_EN | \ - CLOCK_SCCR2_USB1_EN | \ - CLOCK_SCCR2_USB2_EN) - void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip); /* Active chip number set in board_nand_select_device() (mpc5121_nfc.c) */ @@ -83,20 +64,6 @@ void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip) int board_early_init_f(void) { - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 spridr; - - /* - * Initialize Local Window for the CPLD registers access (CS2 selects - * the CPLD chip) - */ - out_be32(&im->sysconf.lpcs2aw, - CSAW_START(CONFIG_SYS_CPLD_BASE) | - CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE) - ); - out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG); - sync_law(&im->sysconf.lpcs2aw); - /* * Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control * @@ -114,25 +81,6 @@ int board_early_init_f(void) out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0x32); } #endif - /* - * Configure Flash Speed - */ - out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG); - - spridr = in_be32(&im->sysconf.spridr); - - if (SVR_MJREV (spridr) >= 2) - out_be32 (&im->lpc.altr, CONFIG_SYS_CS_ALETIMING); - - /* - * Enable clocks - */ - out_be32 (&im->clk.sccr[0], SCCR1_CLOCKS_EN); - out_be32 (&im->clk.sccr[1], SCCR2_CLOCKS_EN); -#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE) - setbits_be32 (&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN); -#endif - return 0; } diff --git a/board/freescale/mx23evk/spl_boot.c b/board/freescale/mx23evk/spl_boot.c index 6007433605..b6f4e7eff2 100644 --- a/board/freescale/mx23evk/spl_boot.c +++ b/board/freescale/mx23evk/spl_boot.c @@ -98,6 +98,16 @@ const iomux_cfg_t iomux_setup[] = { (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), }; +#define HW_DRAM_CTL14 (0x38 >> 2) +#define CS_MAP 0x3 +#define INTAREF 0x2 +#define HW_DRAM_CTL14_CONFIG (INTAREF << 8 | CS_MAP) + +void mxs_adjust_memory_params(uint32_t *dram_vals) +{ + dram_vals[HW_DRAM_CTL14] = HW_DRAM_CTL14_CONFIG; +} + void board_init_ll(void) { mxs_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup)); diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds index 52677299e8..264c4e80ad 100644 --- a/board/freescale/mx31ads/u-boot.lds +++ b/board/freescale/mx31ads/u-boot.lds @@ -60,7 +60,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = ALIGN(4); @@ -80,11 +80,17 @@ SECTIONS _end = .; - .bss __rel_dyn_start (OVERLAY) : { - __bss_start = .; - *(.bss) + .bss_start __rel_dyn_start (OVERLAY) : { + KEEP(*(.__bss_start)); + } + + .bss __bss_start (OVERLAY) : { + *(.bss*) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; + } + .bss_end __bss_end (OVERLAY) : { + KEEP(*(__bss_end)); } /DISCARD/ : { *(.bss*) } diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c index ee20d4fc28..ff7f5e83a0 100644 --- a/board/freescale/mx6qarm2/mx6qarm2.c +++ b/board/freescale/mx6qarm2/mx6qarm2.c @@ -23,7 +23,7 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/imx-regs.h> -#include <asm/arch/mx6x_pins.h> +#include <asm/arch/mx6q_pins.h> #include <asm/arch/clock.h> #include <asm/errno.h> #include <asm/gpio.h> @@ -55,53 +55,53 @@ int dram_init(void) } iomux_v3_cfg_t const uart4_pads[] = { - MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; iomux_v3_cfg_t const usdhc3_pads[] = { - MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_CS0__GPIO_6_11 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_CS0__GPIO_6_11 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; iomux_v3_cfg_t const usdhc4_pads[] = { - MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; iomux_v3_cfg_t const enet_pads[] = { - MX6Q_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), }; diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index 9e3700e1ee..91cc0073bd 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -22,7 +22,7 @@ #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> #include <asm/arch/iomux.h> -#include <asm/arch/mx6x_pins.h> +#include <asm/arch/mx6q_pins.h> #include <asm/errno.h> #include <asm/gpio.h> #include <asm/imx-common/iomux-v3.h> @@ -54,26 +54,26 @@ int dram_init(void) } iomux_v3_cfg_t const uart4_pads[] = { - MX6Q_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6Q_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_KEY_COL0__UART4_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_KEY_ROW0__UART4_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; iomux_v3_cfg_t const enet_pads[] = { - MX6Q_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), }; static void setup_iomux_enet(void) @@ -82,18 +82,18 @@ static void setup_iomux_enet(void) } iomux_v3_cfg_t const usdhc3_pads[] = { - MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_GPIO_18__USDHC3_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_CS2__GPIO_6_15 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_GPIO_18__USDHC3_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_CS2__GPIO_6_15 | MUX_PAD_CTRL(NO_PAD_CTRL), }; static void setup_iomux_uart(void) diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index f010d0c60d..5b69a6d2de 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -25,7 +25,7 @@ #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> #include <asm/arch/iomux.h> -#include <asm/arch/mx6x_pins.h> +#include <asm/arch/mx6q_pins.h> #include <asm/errno.h> #include <asm/gpio.h> #include <asm/imx-common/iomux-v3.h> @@ -46,12 +46,12 @@ DECLARE_GLOBAL_DATA_PTR; #define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) #define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ - PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) #define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ @@ -72,19 +72,19 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { - gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); - return 0; + return 0; } iomux_v3_cfg_t const uart1_pads[] = { - MX6Q_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6Q_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_SD3_DAT6__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_SD3_DAT7__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; iomux_v3_cfg_t const uart2_pads[] = { - MX6Q_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6Q_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_D26__UART2_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_D27__UART2_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) @@ -92,13 +92,13 @@ iomux_v3_cfg_t const uart2_pads[] = { /* I2C1, SGTL5000 */ struct i2c_pads_info i2c_pad_info0 = { .scl = { - .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC, - .gpio_mode = MX6Q_PAD_EIM_D21__GPIO_3_21 | PC, + .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC, + .gpio_mode = MX6_PAD_EIM_D21__GPIO_3_21 | PC, .gp = IMX_GPIO_NR(3, 21) }, .sda = { - .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC, - .gpio_mode = MX6Q_PAD_EIM_D28__GPIO_3_28 | PC, + .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC, + .gpio_mode = MX6_PAD_EIM_D28__GPIO_3_28 | PC, .gp = IMX_GPIO_NR(3, 28) } }; @@ -106,13 +106,13 @@ struct i2c_pads_info i2c_pad_info0 = { /* I2C2 Camera, MIPI */ struct i2c_pads_info i2c_pad_info1 = { .scl = { - .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC, - .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO_4_12 | PC, + .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC, + .gpio_mode = MX6_PAD_KEY_COL3__GPIO_4_12 | PC, .gp = IMX_GPIO_NR(4, 12) }, .sda = { - .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC, - .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO_4_13 | PC, + .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC, + .gpio_mode = MX6_PAD_KEY_ROW3__GPIO_4_13 | PC, .gp = IMX_GPIO_NR(4, 13) } }; @@ -120,86 +120,86 @@ struct i2c_pads_info i2c_pad_info1 = { /* I2C3, J15 - RGB connector */ struct i2c_pads_info i2c_pad_info2 = { .scl = { - .i2c_mode = MX6Q_PAD_GPIO_5__I2C3_SCL | PC, - .gpio_mode = MX6Q_PAD_GPIO_5__GPIO_1_5 | PC, + .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC, + .gpio_mode = MX6_PAD_GPIO_5__GPIO_1_5 | PC, .gp = IMX_GPIO_NR(1, 5) }, .sda = { - .i2c_mode = MX6Q_PAD_GPIO_16__I2C3_SDA | PC, - .gpio_mode = MX6Q_PAD_GPIO_16__GPIO_7_11 | PC, + .i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | PC, + .gpio_mode = MX6_PAD_GPIO_16__GPIO_7_11 | PC, .gp = IMX_GPIO_NR(7, 11) } }; iomux_v3_cfg_t const usdhc3_pads[] = { - MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT5__GPIO_7_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; iomux_v3_cfg_t const usdhc4_pads[] = { - MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ + MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D6__GPIO_2_6 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; iomux_v3_cfg_t const enet_pads1[] = { - MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), /* pin 35 - 1 (PHY_AD2) on reset */ - MX6Q_PAD_RGMII_RXC__GPIO_6_30 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_RGMII_RXC__GPIO_6_30 | MUX_PAD_CTRL(NO_PAD_CTRL), /* pin 32 - 1 - (MODE0) all */ - MX6Q_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL), /* pin 31 - 1 - (MODE1) all */ - MX6Q_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL), /* pin 28 - 1 - (MODE2) all */ - MX6Q_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL), /* pin 27 - 1 - (MODE3) all */ - MX6Q_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL), /* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */ - MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL), /* pin 42 PHY nRST */ - MX6Q_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL), }; iomux_v3_cfg_t const enet_pads2[] = { - MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), }; /* Button assignments for J14 */ static iomux_v3_cfg_t const button_pads[] = { /* Menu */ - MX6Q_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + MX6_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), /* Back */ - MX6Q_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + MX6_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), /* Labelled Search (mapped to Power under Android) */ - MX6Q_PAD_NANDF_D3__GPIO_2_3 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + MX6_PAD_NANDF_D3__GPIO_2_3 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), /* Home */ - MX6Q_PAD_NANDF_D4__GPIO_2_4 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + MX6_PAD_NANDF_D4__GPIO_2_4 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), /* Volume Down */ - MX6Q_PAD_GPIO_19__GPIO_4_5 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + MX6_PAD_GPIO_19__GPIO_4_5 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), /* Volume Up */ - MX6Q_PAD_GPIO_18__GPIO_7_13 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + MX6_PAD_GPIO_18__GPIO_7_13 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), }; static void setup_iomux_enet(void) @@ -221,13 +221,13 @@ static void setup_iomux_enet(void) } iomux_v3_cfg_t const usb_pads[] = { - MX6Q_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_GPIO_17__GPIO_7_12 | MUX_PAD_CTRL(NO_PAD_CTRL), }; static void setup_iomux_uart(void) { imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); - imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); + imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); } #ifdef CONFIG_USB_EHCI_MX6 @@ -246,55 +246,55 @@ int board_ehci_hcd_init(int port) #ifdef CONFIG_FSL_ESDHC struct fsl_esdhc_cfg usdhc_cfg[2] = { - {USDHC3_BASE_ADDR}, - {USDHC4_BASE_ADDR}, + {USDHC3_BASE_ADDR}, + {USDHC4_BASE_ADDR}, }; int board_mmc_getcd(struct mmc *mmc) { - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret; + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret; - if (cfg->esdhc_base == USDHC3_BASE_ADDR) { + if (cfg->esdhc_base == USDHC3_BASE_ADDR) { gpio_direction_input(IMX_GPIO_NR(7, 0)); ret = !gpio_get_value(IMX_GPIO_NR(7, 0)); - } else { + } else { gpio_direction_input(IMX_GPIO_NR(2, 6)); ret = !gpio_get_value(IMX_GPIO_NR(2, 6)); - } + } - return ret; + return ret; } int board_mmc_init(bd_t *bis) { - s32 status = 0; - u32 index = 0; + s32 status = 0; + u32 index = 0; usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { - switch (index) { - case 0: - imx_iomux_v3_setup_multiple_pads( - usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - break; - case 1: - imx_iomux_v3_setup_multiple_pads( - usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); + for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { + switch (index) { + case 0: + imx_iomux_v3_setup_multiple_pads( + usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + break; + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); break; default: - printf("Warning: you configured more USDHC controllers" + printf("Warning: you configured more USDHC controllers" "(%d) then supported by the board (%d)\n", index + 1, CONFIG_SYS_FSL_USDHC_NUM); - return status; - } + return status; + } - status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); - } + status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); + } - return status; + return status; } #endif @@ -306,10 +306,10 @@ u32 get_board_rev(void) #ifdef CONFIG_MXC_SPI iomux_v3_cfg_t const ecspi1_pads[] = { /* SS1 */ - MX6Q_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6Q_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6Q_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), - MX6Q_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D19__GPIO_3_19 | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), }; void setup_spi(void) @@ -403,44 +403,44 @@ int setup_sata(void) static iomux_v3_cfg_t const backlight_pads[] = { /* Backlight on RGB connector: J15 */ - MX6Q_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD1_DAT3__GPIO_1_21 | MUX_PAD_CTRL(NO_PAD_CTRL), #define RGB_BACKLIGHT_GP IMX_GPIO_NR(1, 21) /* Backlight on LVDS connector: J6 */ - MX6Q_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_SD1_CMD__GPIO_1_18 | MUX_PAD_CTRL(NO_PAD_CTRL), #define LVDS_BACKLIGHT_GP IMX_GPIO_NR(1, 18) }; static iomux_v3_cfg_t const rgb_pads[] = { - MX6Q_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, - MX6Q_PAD_DI0_PIN15__IPU1_DI0_PIN15, - MX6Q_PAD_DI0_PIN2__IPU1_DI0_PIN2, - MX6Q_PAD_DI0_PIN3__IPU1_DI0_PIN3, - MX6Q_PAD_DI0_PIN4__GPIO_4_20, - MX6Q_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0, - MX6Q_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1, - MX6Q_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2, - MX6Q_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3, - MX6Q_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4, - MX6Q_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5, - MX6Q_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6, - MX6Q_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7, - MX6Q_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8, - MX6Q_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9, - MX6Q_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10, - MX6Q_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11, - MX6Q_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12, - MX6Q_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13, - MX6Q_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14, - MX6Q_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15, - MX6Q_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16, - MX6Q_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17, - MX6Q_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18, - MX6Q_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19, - MX6Q_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20, - MX6Q_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21, - MX6Q_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22, - MX6Q_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23, + MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, + MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15, + MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2, + MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3, + MX6_PAD_DI0_PIN4__GPIO_4_20, + MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0, + MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1, + MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2, + MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3, + MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4, + MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5, + MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6, + MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7, + MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8, + MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9, + MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10, + MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11, + MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12, + MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13, + MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14, + MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15, + MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16, + MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17, + MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18, + MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19, + MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20, + MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21, + MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22, + MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23, }; struct display_info_t { @@ -455,32 +455,26 @@ struct display_info_t { static int detect_hdmi(struct display_info_t const *dev) { - return __raw_readb(HDMI_ARB_BASE_ADDR+HDMI_PHY_STAT0) & HDMI_PHY_HPD; + struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; + return readb(&hdmi->phy_stat0) & HDMI_PHY_HPD; } static void enable_hdmi(struct display_info_t const *dev) { + struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; u8 reg; printf("%s: setup HDMI monitor\n", __func__); - reg = __raw_readb( - HDMI_ARB_BASE_ADDR - +HDMI_PHY_CONF0); + reg = readb(&hdmi->phy_conf0); reg |= HDMI_PHY_CONF0_PDZ_MASK; - __raw_writeb(reg, - HDMI_ARB_BASE_ADDR - +HDMI_PHY_CONF0); + writeb(reg, &hdmi->phy_conf0); + udelay(3000); reg |= HDMI_PHY_CONF0_ENTMDS_MASK; - __raw_writeb(reg, - HDMI_ARB_BASE_ADDR - +HDMI_PHY_CONF0); + writeb(reg, &hdmi->phy_conf0); udelay(3000); reg |= HDMI_PHY_CONF0_GEN2_TXPWRON_MASK; - __raw_writeb(reg, - HDMI_ARB_BASE_ADDR - +HDMI_PHY_CONF0); - __raw_writeb(HDMI_MC_PHYRSTZ_ASSERT, - HDMI_ARB_BASE_ADDR+HDMI_MC_PHYRSTZ); + writeb(reg, &hdmi->phy_conf0); + writeb(HDMI_MC_PHYRSTZ_ASSERT, &hdmi->mc_phyrstz); } static int detect_i2c(struct display_info_t const *dev) @@ -638,6 +632,7 @@ static void setup_display(void) struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + struct hdmi_regs *hdmi = (struct hdmi_regs *)HDMI_ARB_BASE_ADDR; int reg; @@ -654,8 +649,7 @@ static void setup_display(void) writel(reg, &mxc_ccm->CCGR2); /* clear HDMI PHY reset */ - __raw_writeb(HDMI_MC_PHYRSTZ_DEASSERT, - HDMI_ARB_BASE_ADDR+HDMI_MC_PHYRSTZ); + writeb(HDMI_MC_PHYRSTZ_DEASSERT, &hdmi->mc_phyrstz); /* set PFD1_FRAC to 0x13 == 455 MHz (480*18)/0x13 */ writel(ANATOP_PFD_480_PFD1_FRAC_MASK, &anatop->pfd_480_clr); @@ -732,8 +726,8 @@ int overwrite_console(void) int board_init(void) { - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; #ifdef CONFIG_MXC_SPI setup_spi(); @@ -746,14 +740,14 @@ int board_init(void) setup_sata(); #endif - return 0; + return 0; } int checkboard(void) { - puts("Board: MX6Q-Sabre Lite\n"); + puts("Board: MX6Q-Sabre Lite\n"); - return 0; + return 0; } struct button_key { diff --git a/board/freescale/mx6qsabresd/mx6qsabresd.c b/board/freescale/mx6qsabresd/mx6qsabresd.c index 65c4a1a4f3..2b3926aaf3 100644 --- a/board/freescale/mx6qsabresd/mx6qsabresd.c +++ b/board/freescale/mx6qsabresd/mx6qsabresd.c @@ -22,7 +22,7 @@ #include <asm/arch/clock.h> #include <asm/arch/imx-regs.h> #include <asm/arch/iomux.h> -#include <asm/arch/mx6x_pins.h> +#include <asm/arch/mx6q_pins.h> #include <asm/errno.h> #include <asm/gpio.h> #include <asm/imx-common/iomux-v3.h> @@ -52,28 +52,28 @@ int dram_init(void) } iomux_v3_cfg_t const uart1_pads[] = { - MX6Q_PAD_CSI0_DAT10__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6Q_PAD_CSI0_DAT11__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT10__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT11__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL), }; iomux_v3_cfg_t const enet_pads[] = { - MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD0__ENET_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD1__ENET_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD2__ENET_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD3__ENET_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), /* AR8031 PHY Reset */ - MX6Q_PAD_ENET_CRS_DV__GPIO_1_25 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_ENET_CRS_DV__GPIO_1_25 | MUX_PAD_CTRL(NO_PAD_CTRL), }; static void setup_iomux_enet(void) @@ -87,44 +87,44 @@ static void setup_iomux_enet(void) } iomux_v3_cfg_t const usdhc2_pads[] = { - MX6Q_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_D4__USDHC2_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_D5__USDHC2_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_D6__USDHC2_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_D7__USDHC2_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ + MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D4__USDHC2_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D5__USDHC2_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D6__USDHC2_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D7__USDHC2_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; iomux_v3_cfg_t const usdhc3_pads[] = { - MX6Q_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_NANDF_D0__GPIO_2_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__USDHC3_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__USDHC3_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__USDHC3_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__USDHC3_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT4__USDHC3_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT5__USDHC3_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT6__USDHC3_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT7__USDHC3_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_NANDF_D0__GPIO_2_0 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; iomux_v3_cfg_t const usdhc4_pads[] = { - MX6Q_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT0__USDHC4_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT1__USDHC4_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT2__USDHC4_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT3__USDHC4_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT4__USDHC4_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT5__USDHC4_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT6__USDHC4_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT7__USDHC4_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; static void setup_iomux_uart(void) diff --git a/board/gaisler/gr_cpci_ax2000/u-boot.lds b/board/gaisler/gr_cpci_ax2000/u-boot.lds index 774c494f03..60039ccfb4 100644 --- a/board/gaisler/gr_cpci_ax2000/u-boot.lds +++ b/board/gaisler/gr_cpci_ax2000/u-boot.lds @@ -88,7 +88,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data : @@ -134,7 +134,7 @@ SECTIONS . = ALIGN(16); /* to speed clearing of bss up */ } __bss_end = . ; - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); /* Relocated into main memory */ diff --git a/board/gaisler/gr_ep2s60/u-boot.lds b/board/gaisler/gr_ep2s60/u-boot.lds index f6d13014f3..ec73f737cd 100644 --- a/board/gaisler/gr_ep2s60/u-boot.lds +++ b/board/gaisler/gr_ep2s60/u-boot.lds @@ -88,7 +88,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data : @@ -134,7 +134,7 @@ SECTIONS . = ALIGN(16); /* to speed clearing of bss up */ } __bss_end = . ; - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); /* Relocated into main memory */ diff --git a/board/gaisler/gr_xc3s_1500/u-boot.lds b/board/gaisler/gr_xc3s_1500/u-boot.lds index 7df6e83392..18dfb814bf 100644 --- a/board/gaisler/gr_xc3s_1500/u-boot.lds +++ b/board/gaisler/gr_xc3s_1500/u-boot.lds @@ -88,7 +88,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data : @@ -135,7 +135,7 @@ SECTIONS . = ALIGN(16); /* to speed clearing of bss up */ } __bss_end = . ; - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); /* Relocated into main memory */ diff --git a/board/gaisler/grsim/u-boot.lds b/board/gaisler/grsim/u-boot.lds index b241cbc1d0..8de272e4cb 100644 --- a/board/gaisler/grsim/u-boot.lds +++ b/board/gaisler/grsim/u-boot.lds @@ -87,7 +87,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data : @@ -134,7 +134,7 @@ SECTIONS . = ALIGN(16); /* to speed clearing of bss up */ } __bss_end = . ; - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); /* Relocated into main memory */ diff --git a/board/gaisler/grsim_leon2/u-boot.lds b/board/gaisler/grsim_leon2/u-boot.lds index 63c15b9117..e57f734121 100644 --- a/board/gaisler/grsim_leon2/u-boot.lds +++ b/board/gaisler/grsim_leon2/u-boot.lds @@ -87,7 +87,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .data : @@ -133,7 +133,7 @@ SECTIONS . = ALIGN(16); /* to speed clearing of bss up */ } __bss_end = . ; - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); /* Relocated into main memory */ diff --git a/board/gen860t/u-boot-flashenv.lds b/board/gen860t/u-boot-flashenv.lds index 1cbe7e32ba..30138dd814 100644 --- a/board/gen860t/u-boot-flashenv.lds +++ b/board/gen860t/u-boot-flashenv.lds @@ -73,7 +73,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -97,7 +97,7 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); .ppcenv: diff --git a/board/gen860t/u-boot.lds b/board/gen860t/u-boot.lds index dd89c70f56..08fb4aa1fd 100644 --- a/board/gen860t/u-boot.lds +++ b/board/gen860t/u-boot.lds @@ -74,7 +74,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -98,6 +98,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/genietv/u-boot.lds b/board/genietv/u-boot.lds index 124b183516..b351a68110 100644 --- a/board/genietv/u-boot.lds +++ b/board/genietv/u-boot.lds @@ -83,7 +83,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -112,6 +112,6 @@ SECTIONS common/env_embedded.o (.ppcenv) } . = ALIGN(4); - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/genietv/u-boot.lds.debug b/board/genietv/u-boot.lds.debug index e1cf249650..a3aeb604cc 100644 --- a/board/genietv/u-boot.lds.debug +++ b/board/genietv/u-boot.lds.debug @@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/hermes/u-boot.lds b/board/hermes/u-boot.lds index f02eb1c2aa..8e58963759 100644 --- a/board/hermes/u-boot.lds +++ b/board/hermes/u-boot.lds @@ -75,7 +75,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -99,6 +99,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/hermes/u-boot.lds.debug b/board/hermes/u-boot.lds.debug index e84cc7991e..4383c492c3 100644 --- a/board/hermes/u-boot.lds.debug +++ b/board/hermes/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c index 9fe6408ecf..923461a390 100644 --- a/board/htkw/mcx/mcx.c +++ b/board/htkw/mcx/mcx.c @@ -114,7 +114,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif @@ -130,6 +130,7 @@ static struct panel_config lcd_cfg = { .load_mode = 0x02, /* Frame Mode */ .panel_color = 0, .lcd_size = PANEL_LCD_SIZE(800, 480), + .gfx_format = GFXFORMAT_RGB24_UNPACKED, }; int board_video_init(void) diff --git a/board/hymod/u-boot.lds b/board/hymod/u-boot.lds index 7afae0a625..5d1c2ad3cb 100644 --- a/board/hymod/u-boot.lds +++ b/board/hymod/u-boot.lds @@ -113,7 +113,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -143,6 +143,6 @@ SECTIONS common/env_embedded.o (.ppcenv) } . = ALIGN(4); - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/hymod/u-boot.lds.debug b/board/hymod/u-boot.lds.debug index dc8c4e958f..e88bd977d9 100644 --- a/board/hymod/u-boot.lds.debug +++ b/board/hymod/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/icu862/u-boot.lds b/board/icu862/u-boot.lds index 6778eb13ad..6e4939b8bf 100644 --- a/board/icu862/u-boot.lds +++ b/board/icu862/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/icu862/u-boot.lds.debug b/board/icu862/u-boot.lds.debug index 3e075a85bd..9995288517 100644 --- a/board/icu862/u-boot.lds.debug +++ b/board/icu862/u-boot.lds.debug @@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/idmr/u-boot.lds b/board/idmr/u-boot.lds index 0d6a0f3a3b..5b8d3b3715 100644 --- a/board/idmr/u-boot.lds +++ b/board/idmr/u-boot.lds @@ -68,7 +68,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -93,6 +93,6 @@ SECTIONS . = ALIGN(4); _ebss = .; } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/ifm/ac14xx/Makefile b/board/ifm/ac14xx/Makefile new file mode 100644 index 0000000000..9a76f32af5 --- /dev/null +++ b/board/ifm/ac14xx/Makefile @@ -0,0 +1,34 @@ +# +# (C) Copyright 2009 Wolfgang Denk <wd@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y := $(BOARD).o + +COBJS := $(COBJS-y) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ifm/ac14xx/ac14xx.c b/board/ifm/ac14xx/ac14xx.c new file mode 100644 index 0000000000..74425912d6 --- /dev/null +++ b/board/ifm/ac14xx/ac14xx.c @@ -0,0 +1,617 @@ +/* + * (C) Copyright 2009 Wolfgang Denk <wd@denx.de> + * (C) Copyright 2009 Dave Srl www.dave.eu + * (C) Copyright 2010 ifm ecomatic GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include <common.h> +#include <asm/bitops.h> +#include <command.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/mpc512x.h> +#include <fdt_support.h> +#ifdef CONFIG_MISC_INIT_R +#include <i2c.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static void gpio_configure(void) +{ + immap_t *im; + gpio512x_t *gpioregs; + + im = (immap_t *) CONFIG_SYS_IMMR; + gpioregs = &im->gpio; + out_be32(&gpioregs->gpodr, 0x00290000); /* open drain */ + out_be32(&gpioregs->gpdat, 0x80001040); /* data (when output) */ + + /* + * out_be32(&gpioregs->gpdir, 0xC2293020); + * workaround for a hardware affect: configure direction in pieces, + * setting all outputs at once drops the reset line too low and + * makes us lose the MII connection (breaks ethernet for us) + */ + out_be32(&gpioregs->gpdir, 0x02003060); /* direction */ + setbits_be32(&gpioregs->gpdir, 0x00200000); /* += reset asi */ + udelay(10); + setbits_be32(&gpioregs->gpdir, 0x00080000); /* += reset safety */ + udelay(10); + setbits_be32(&gpioregs->gpdir, 0x00010000); /* += reset comm */ + udelay(10); + setbits_be32(&gpioregs->gpdir, 0xC0000000); /* += backlight, KB sel */ + + /* to turn from red to yellow when U-Boot runs */ + setbits_be32(&gpioregs->gpdat, 0x00002020); + out_be32(&gpioregs->gpimr, 0x00000000); /* interrupt mask */ + out_be32(&gpioregs->gpicr1, 0x00000004); /* interrupt sense part 1 */ + out_be32(&gpioregs->gpicr2, 0x00A80000); /* interrupt sense part 2 */ + out_be32(&gpioregs->gpier, 0xFFFFFFFF); /* interrupt events, clear */ +} + +/* the physical location of the pins */ +#define GPIOKEY_ROW_BITMASK 0x40000000 +#define GPIOKEY_ROW_UPPER 0 +#define GPIOKEY_ROW_LOWER 1 + +#define GPIOKEY_COL0_BITMASK 0x20000000 +#define GPIOKEY_COL1_BITMASK 0x10000000 +#define GPIOKEY_COL2_BITMASK 0x08000000 + +/* the logical presentation of pressed keys */ +#define GPIOKEY_BIT_FNLEFT (1 << 5) +#define GPIOKEY_BIT_FNRIGHT (1 << 4) +#define GPIOKEY_BIT_DIRUP (1 << 3) +#define GPIOKEY_BIT_DIRLEFT (1 << 2) +#define GPIOKEY_BIT_DIRRIGHT (1 << 1) +#define GPIOKEY_BIT_DIRDOWN (1 << 0) + +/* the hotkey combination which starts recovery */ +#define GPIOKEY_BITS_RECOVERY (GPIOKEY_BIT_FNLEFT | GPIOKEY_BIT_DIRUP | \ + GPIOKEY_BIT_DIRDOWN) + +static void gpio_selectrow(gpio512x_t *gpioregs, u32 row) +{ + + if (row) + setbits_be32(&gpioregs->gpdat, GPIOKEY_ROW_BITMASK); + else + clrbits_be32(&gpioregs->gpdat, GPIOKEY_ROW_BITMASK); + udelay(10); +} + +static u32 gpio_querykbd(void) +{ + immap_t *im; + gpio512x_t *gpioregs; + u32 keybits; + u32 input; + + im = (immap_t *)CONFIG_SYS_IMMR; + gpioregs = &im->gpio; + keybits = 0; + + /* query upper row */ + gpio_selectrow(gpioregs, GPIOKEY_ROW_UPPER); + input = in_be32(&gpioregs->gpdat); + if ((input & GPIOKEY_COL0_BITMASK) == 0) + keybits |= GPIOKEY_BIT_FNLEFT; + if ((input & GPIOKEY_COL1_BITMASK) == 0) + keybits |= GPIOKEY_BIT_DIRUP; + if ((input & GPIOKEY_COL2_BITMASK) == 0) + keybits |= GPIOKEY_BIT_FNRIGHT; + + /* query lower row */ + gpio_selectrow(gpioregs, GPIOKEY_ROW_LOWER); + input = in_be32(&gpioregs->gpdat); + if ((input & GPIOKEY_COL0_BITMASK) == 0) + keybits |= GPIOKEY_BIT_DIRLEFT; + if ((input & GPIOKEY_COL1_BITMASK) == 0) + keybits |= GPIOKEY_BIT_DIRRIGHT; + if ((input & GPIOKEY_COL2_BITMASK) == 0) + keybits |= GPIOKEY_BIT_DIRDOWN; + + /* return bit pattern for keys */ + return keybits; +} + +/* excerpt from the recovery's hw_info.h */ + +static int eeprom_diag = 1; + +struct __attribute__ ((__packed__)) eeprom_layout { + char magic[3]; /** 'ifm' */ + u8 len[2]; /** content length without magic/len fields */ + u8 version[3]; /** structure version */ + u8 type; /** type of PCB */ + u8 reserved[0x37]; /** padding up to offset 0x40 */ + u8 macaddress[6]; /** ethernet MAC (for the mainboard) @0x40 */ +}; + +#define HW_COMP_MAINCPU 2 + +static struct eeprom_layout eeprom_content; +static int eeprom_was_read; /* has_been_read */ +static int eeprom_is_valid; +static int eeprom_version; + +#define get_eeprom_field_int(name) ({ \ + int value; \ + int idx; \ + value = 0; \ + for (idx = 0; idx < sizeof(name); idx++) { \ + value <<= 8; \ + value |= name[idx]; \ + } \ + value; \ +}) + +static int read_eeprom(void) +{ + int eeprom_datalen; + int ret; + + if (eeprom_was_read) + return 0; + + eeprom_is_valid = 0; + ret = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, + CONFIG_SYS_I2C_EEPROM_ADDR_LEN, + (uchar *)&eeprom_content, sizeof(eeprom_content)); + if (eeprom_diag) { + printf("DIAG: %s() read rc[%d], size[%d]\n", + __func__, ret, sizeof(eeprom_content)); + } + + if (ret != 0) + return -1; + + eeprom_was_read = 1; + + /* + * check validity of EEPROM content + * (check version, length, optionally checksum) + */ + eeprom_is_valid = 1; + eeprom_datalen = get_eeprom_field_int(eeprom_content.len); + eeprom_version = get_eeprom_field_int(eeprom_content.version); + + if (eeprom_diag) { + printf("DIAG: %s() magic[%c%c%c] len[%d] ver[%d] type[%d]\n", + __func__, eeprom_content.magic[0], + eeprom_content.magic[1], eeprom_content.magic[2], + eeprom_datalen, eeprom_version, eeprom_content.type); + } + if (strncmp(eeprom_content.magic, "ifm", strlen("ifm")) != 0) + eeprom_is_valid = 0; + if (eeprom_datalen < sizeof(struct eeprom_layout) - 5) + eeprom_is_valid = 0; + if ((eeprom_version != 1) && (eeprom_version != 2)) + eeprom_is_valid = 0; + if (eeprom_content.type != HW_COMP_MAINCPU) + eeprom_is_valid = 0; + + if (eeprom_diag) + printf("DIAG: %s() valid[%d]\n", __func__, eeprom_is_valid); + + return ret; +} + +int mac_read_from_eeprom(void) +{ + const u8 *mac; + + if (read_eeprom()) { + printf("I2C EEPROM read failed.\n"); + return -1; + } + + if (!eeprom_is_valid) { + printf("I2C EEPROM content not valid\n"); + return -1; + } + + mac = NULL; + switch (eeprom_version) { + case 1: + case 2: + mac = (const u8 *)&eeprom_content.macaddress; + break; + } + + if (mac && is_valid_ether_addr(mac)) { + eth_setenv_enetaddr("ethaddr", mac); + printf("DIAG: %s() MAC value [%s]\n", + __func__, getenv("ethaddr")); + } + + return 0; +} + +/* + * BEWARE! + * this board uses DDR1(!) Micron SDRAM, *NOT* the DDR2 + * which the ADS, Aria or PDM360NG boards are using + * (the steps outlined here refer to the Micron datasheet) + */ +u32 sdram_init_seq[] = { + /* item 6, at least one NOP after CKE went high */ + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + /* item 7, precharge all; item 8, tRP (20ns) */ + CONFIG_SYS_DDRCMD_PCHG_ALL, + CONFIG_SYS_DDRCMD_NOP, + /* item 9, extended mode register; item 10, tMRD 10ns) */ + CONFIG_SYS_MICRON_EMODE | CONFIG_SYS_MICRON_EMODE_PARAM, + CONFIG_SYS_DDRCMD_NOP, + /* + * item 11, (base) mode register _with_ reset DLL; + * item 12, tMRD (10ns) + */ + CONFIG_SYS_MICRON_BMODE | CONFIG_SYS_MICRON_BMODE_RSTDLL | + CONFIG_SYS_MICRON_BMODE_PARAM, + CONFIG_SYS_DDRCMD_NOP, + /* item 13, precharge all; item 14, tRP (20ns) */ + CONFIG_SYS_DDRCMD_PCHG_ALL, + CONFIG_SYS_DDRCMD_NOP, + /* + * item 15, auto refresh (i.e. refresh with CKE held high); + * item 16, tRFC (70ns) + */ + CONFIG_SYS_DDRCMD_RFSH, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + /* + * item 17, auto refresh (i.e. refresh with CKE held high); + * item 18, tRFC (70ns) + */ + CONFIG_SYS_DDRCMD_RFSH, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + CONFIG_SYS_DDRCMD_NOP, + /* item 19, optional, unassert DLL reset; item 20, tMRD (20ns) */ + CONFIG_SYS_MICRON_BMODE | CONFIG_SYS_MICRON_BMODE_PARAM, + CONFIG_SYS_DDRCMD_NOP, + /* + * item 21, "actually done", but make sure 200 DRAM clock cycles + * have passed after DLL reset before READ requests are issued + * (200 cycles at 160MHz -> 1.25 usec) + */ + /* EMPTY, optional, we don't do it */ +}; + +phys_size_t initdram(int board_type) +{ + return fixed_sdram(NULL, sdram_init_seq, ARRAY_SIZE(sdram_init_seq)); +} + +int misc_init_r(void) +{ + u32 keys; + char *s; + int want_recovery; + + /* we use bus I2C-0 for the on-board eeprom */ + i2c_set_bus_num(0); + + /* setup GPIO directions and initial values */ + gpio_configure(); + + /* + * check the GPIO keyboard, + * enforced start of the recovery when + * - the appropriate keys were pressed + * - a previous installation was aborted or has failed + * - "some" external software told us to + */ + want_recovery = 0; + keys = gpio_querykbd(); + printf("GPIO keyboard status [0x%08X]\n", keys); + /* XXX insist in the _exact_ combination? */ + if ((keys & GPIOKEY_BITS_RECOVERY) == GPIOKEY_BITS_RECOVERY) { + printf("GPIO keyboard requested RECOVERY\n"); + /* XXX TODO + * refine the logic to detect the first keypress, and + * wait to recheck IF it was the recovery combination? + */ + want_recovery = 1; + } + s = getenv("install_in_progress"); + if ((s != NULL) && (*s != '\0')) { + printf("previous installation aborted, running RECOVERY\n"); + want_recovery = 1; + } + s = getenv("install_failed"); + if ((s != NULL) && (*s != '\0')) { + printf("previous installation FAILED, running RECOVERY\n"); + want_recovery = 1; + } + s = getenv("want_recovery"); + if ((s != NULL) && (*s != '\0')) { + printf("running RECOVERY according to the request\n"); + want_recovery = 1; + } + + if (want_recovery) + setenv("bootcmd", "run recovery"); + + /* + * boot the recovery system without waiting; boot the + * production system without waiting by default, only + * insert a pause (to provide a chance to get a prompt) + * when GPIO keys were pressed during power on + */ + if (want_recovery) + setenv("bootdelay", "0"); + else if (!keys) + setenv("bootdelay", "0"); + else + setenv("bootdelay", "2"); + + /* get the ethernet MAC from I2C EEPROM */ + mac_read_from_eeprom(); + + return 0; +} + +/* setup specific IO pad configuration */ +static iopin_t ioregs_init[] = { + { /* LPC CS3 */ + offsetof(struct ioctrl512x, io_control_nfc_ce0), 1, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(1) | IO_PIN_DS(2), + }, + { /* LPC CS1 */ + offsetof(struct ioctrl512x, io_control_lpc_cs1), 1, + IO_PIN_OVER_DRVSTR, + IO_PIN_DS(2), + }, + { /* LPC CS2 */ + offsetof(struct ioctrl512x, io_control_lpc_cs2), 1, + IO_PIN_OVER_DRVSTR, + IO_PIN_DS(2), + }, + { /* LPC CS4, CS5 */ + offsetof(struct ioctrl512x, io_control_pata_ce1), 2, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(1) | IO_PIN_DS(2), + }, + { /* SDHC CLK, CMD, D0, D1, D2, D3 */ + offsetof(struct ioctrl512x, io_control_pata_ior), 6, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(1) | IO_PIN_DS(2), + }, + { /* GPIO keyboard */ + offsetof(struct ioctrl512x, io_control_pci_ad30), 4, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* GPIO DN1 PF, LCD power, DN2 PF */ + offsetof(struct ioctrl512x, io_control_pci_ad26), 3, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* GPIO reset AS-i */ + offsetof(struct ioctrl512x, io_control_pci_ad21), 1, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* GPIO reset safety */ + offsetof(struct ioctrl512x, io_control_pci_ad19), 1, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* GPIO reset netX */ + offsetof(struct ioctrl512x, io_control_pci_ad16), 1, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* GPIO ma2 en */ + offsetof(struct ioctrl512x, io_control_pci_ad15), 1, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* GPIO SD CD, SD WP */ + offsetof(struct ioctrl512x, io_control_pci_ad08), 2, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* FEC RX DV */ + offsetof(struct ioctrl512x, io_control_pci_ad06), 1, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(2) | IO_PIN_DS(2), + }, + { /* GPIO AS-i prog, AS-i done, LCD backlight */ + offsetof(struct ioctrl512x, io_control_pci_ad05), 3, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* GPIO AS-i wdg */ + offsetof(struct ioctrl512x, io_control_pci_req2), 1, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* GPIO safety wdg */ + offsetof(struct ioctrl512x, io_control_pci_req1), 1, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* GPIO netX wdg */ + offsetof(struct ioctrl512x, io_control_pci_req0), 1, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* GPIO IRQ powerfail */ + offsetof(struct ioctrl512x, io_control_pci_inta), 1, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* GPIO AS-i PWRD */ + offsetof(struct ioctrl512x, io_control_pci_frame), 1, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* GPIO LED0, LED1 */ + offsetof(struct ioctrl512x, io_control_pci_idsel), 2, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* GPIO IRQ AS-i 1, IRQ AS-i 2, IRQ safety */ + offsetof(struct ioctrl512x, io_control_pci_irdy), 3, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* DIU clk */ + offsetof(struct ioctrl512x, io_control_spdif_txclk), 1, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(2) | IO_PIN_DS(2), + }, + { /* FEC TX ER, CRS */ + offsetof(struct ioctrl512x, io_control_spdif_tx), 2, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(1) | IO_PIN_DS(2), + }, + { /* GPIO/GPT */ /* to *NOT* have the EXT IRQ0 float */ + offsetof(struct ioctrl512x, io_control_irq0), 1, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + { /* + * FEC col, tx en, tx clk, txd 0-3, mdc, rx er, + * rdx 3-0, mdio, rx clk + */ + offsetof(struct ioctrl512x, io_control_psc0_0), 15, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(1) | IO_PIN_DS(2), + }, + /* optional: make sure PSC3 remains the serial console */ + { /* LPC CS6 */ + offsetof(struct ioctrl512x, io_control_psc3_4), 1, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(1) | IO_PIN_DS(2), + }, + /* make sure PSC4 remains available for SPI, + *BUT* PSC4_1 is a GPIO kind of SS! */ + { /* enforce drive strength on the SPI pin */ + offsetof(struct ioctrl512x, io_control_psc4_0), 5, + IO_PIN_OVER_DRVSTR, + IO_PIN_DS(2), + }, + { + offsetof(struct ioctrl512x, io_control_psc4_1), 1, + IO_PIN_OVER_FMUX, + IO_PIN_FMUX(3), + }, + /* optional: make sure PSC5 remains available for SPI */ + { /* enforce drive strength on the SPI pin */ + offsetof(struct ioctrl512x, io_control_psc5_0), 5, + IO_PIN_OVER_DRVSTR, + IO_PIN_DS(1), + }, + { /* LPC TSIZ1 */ + offsetof(struct ioctrl512x, io_control_psc6_0), 1, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(1) | IO_PIN_DS(2), + }, + { /* DIU hsync */ + offsetof(struct ioctrl512x, io_control_psc6_1), 1, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(2) | IO_PIN_DS(1), + }, + { /* DIU vsync */ + offsetof(struct ioctrl512x, io_control_psc6_4), 1, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(2) | IO_PIN_DS(1), + }, + { /* PSC7, part of DIU RGB */ + offsetof(struct ioctrl512x, io_control_psc7_0), 2, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(2) | IO_PIN_DS(1), + }, + { /* PSC7, safety UART */ + offsetof(struct ioctrl512x, io_control_psc7_2), 2, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(0) | IO_PIN_DS(1), + }, + { /* DIU (part of) RGB[] */ + offsetof(struct ioctrl512x, io_control_psc8_3), 16, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(2) | IO_PIN_DS(1), + }, + { /* DIU data enable */ + offsetof(struct ioctrl512x, io_control_psc11_4), 1, + IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, + IO_PIN_FMUX(2) | IO_PIN_DS(1), + }, + /* reduce LPB drive strength for improved EMI */ + { /* LPC OE, LPC RW */ + offsetof(struct ioctrl512x, io_control_lpc_oe), 2, + IO_PIN_OVER_DRVSTR, + IO_PIN_DS(2), + }, + { /* LPC AX03 through LPC AD00 */ + offsetof(struct ioctrl512x, io_control_lpc_ax03), 36, + IO_PIN_OVER_DRVSTR, + IO_PIN_DS(2), + }, + { /* LPC CS5 */ + offsetof(struct ioctrl512x, io_control_pata_ce2), 1, + IO_PIN_OVER_DRVSTR, + IO_PIN_DS(2), + }, + { /* SDHC CLK */ + offsetof(struct ioctrl512x, io_control_nfc_wp), 1, + IO_PIN_OVER_DRVSTR, + IO_PIN_DS(2), + }, + { /* SDHC DATA */ + offsetof(struct ioctrl512x, io_control_nfc_ale), 4, + IO_PIN_OVER_DRVSTR, + IO_PIN_DS(2), + }, +}; + +int checkboard(void) +{ + puts("Board: ifm AC14xx\n"); + + /* initialize function mux & slew rate IO inter alia on IO Pins */ + iopin_initialize_bits(ioregs_init, ARRAY_SIZE(ioregs_init)); + + return 0; +} + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/ip860/u-boot.lds b/board/ip860/u-boot.lds index 18f962cfa5..3334a44f61 100644 --- a/board/ip860/u-boot.lds +++ b/board/ip860/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/ip860/u-boot.lds.debug b/board/ip860/u-boot.lds.debug index e47aff0fa7..0b34177531 100644 --- a/board/ip860/u-boot.lds.debug +++ b/board/ip860/u-boot.lds.debug @@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c index 49fcf34893..2bac916576 100644 --- a/board/isee/igep00x0/igep00x0.c +++ b/board/isee/igep00x0/igep00x0.c @@ -150,8 +150,7 @@ static inline void setup_net_chip(void) {} #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/isee/igep00x0/igep00x0.h b/board/isee/igep00x0/igep00x0.h index ea1e9acab3..5ef22aeda4 100644 --- a/board/isee/igep00x0/igep00x0.h +++ b/board/isee/igep00x0/igep00x0.h @@ -34,10 +34,13 @@ const omap3_sysinfo sysinfo = { DDR_STACKED, #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) - "OMAP3 IGEP v2 board", + "IGEPv2", #endif #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) - "OMAP3 IGEP COM Module", + "IGEP COM MODULE/ELECTRON", +#endif +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032) + "IGEP COM PROTON", #endif #if defined(CONFIG_ENV_IS_IN_ONENAND) "ONENAND", diff --git a/board/ivm/u-boot.lds b/board/ivm/u-boot.lds index 4cca652748..1b43dbe788 100644 --- a/board/ivm/u-boot.lds +++ b/board/ivm/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/ivm/u-boot.lds.debug b/board/ivm/u-boot.lds.debug index 53a19b2947..bae9fb28ee 100644 --- a/board/ivm/u-boot.lds.debug +++ b/board/ivm/u-boot.lds.debug @@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index 6f407b78f2..ef93ed3f66 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -38,9 +38,7 @@ #include "post.h" #endif #include "common.h" -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) #include <i2c.h> -#endif #if !defined(CONFIG_MPC83xx) static void i2c_write_start_seq(void); @@ -185,17 +183,6 @@ void i2c_init_board(void) } #endif - -#if !defined(MACH_TYPE_KM_KIRKWOOD) -int ethernet_present(void) -{ - struct km_bec_fpga *base = - (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE; - - return in_8(&base->bprth) & PIGGY_PRESENT; -} -#endif - int board_eth_init(bd_t *bis) { if (ethernet_present()) diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c index eaa924f0e6..22d525602a 100644 --- a/board/keymile/common/ivm.c +++ b/board/keymile/common/ivm.c @@ -201,6 +201,22 @@ static int ivm_check_crc(unsigned char *buf, int block) return 0; } +static int calculate_mac_offset(unsigned char *valbuf, unsigned char *buf, + int offset) +{ + unsigned long val = (buf[4] << 16) + (buf[5] << 8) + buf[6]; + + if (offset == 0) + return 0; + + val += offset; + buf[4] = (val >> 16) & 0xff; + buf[5] = (val >> 8) & 0xff; + buf[6] = val & 0xff; + sprintf((char *)valbuf, "%pM", buf + 1); + return 0; +} + static int ivm_analyze_block2(unsigned char *buf, int len) { unsigned char valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN]; @@ -210,24 +226,20 @@ static int ivm_analyze_block2(unsigned char *buf, int len) sprintf((char *)valbuf, "%pM", buf + 1); ivm_set_value("IVM_MacAddress", (char *)valbuf); /* if an offset is defined, add it */ -#if defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET) - if (CONFIG_PIGGY_MAC_ADRESS_OFFSET > 0) { - unsigned long val = (buf[4] << 16) + (buf[5] << 8) + buf[6]; - - val += CONFIG_PIGGY_MAC_ADRESS_OFFSET; - buf[4] = (val >> 16) & 0xff; - buf[5] = (val >> 8) & 0xff; - buf[6] = val & 0xff; - sprintf((char *)valbuf, "%pM", buf + 1); - } -#endif + calculate_mac_offset(buf, valbuf, CONFIG_PIGGY_MAC_ADRESS_OFFSET); #ifdef MACH_TYPE_KM_KIRKWOOD setenv((char *)"ethaddr", (char *)valbuf); #else if (getenv("ethaddr") == NULL) setenv((char *)"ethaddr", (char *)valbuf); #endif - +#ifdef CONFIG_KMVECT1 +/* KMVECT1 has two ethernet interfaces */ + if (getenv("eth1addr") == NULL) { + calculate_mac_offset(buf, valbuf, 1); + setenv((char *)"eth1addr", (char *)valbuf); + } +#endif /* IVM_MacCount */ count = (buf[10] << 24) + (buf[11] << 16) + @@ -312,27 +324,15 @@ int ivm_read_eeprom(void) #if defined(CONFIG_I2C_MUX) /* First init the Bus, select the Bus */ -#if defined(CONFIG_SYS_I2C_IVM_BUS) - dev = i2c_mux_ident_muxstring((uchar *)CONFIG_SYS_I2C_IVM_BUS); -#else buf = (unsigned char *) getenv("EEprom_ivm"); if (buf != NULL) dev = i2c_mux_ident_muxstring(buf); -#endif if (dev == NULL) { printf("Error couldnt add Bus for IVM\n"); return -1; } i2c_set_bus_num(dev->busid); #endif - - buf = (unsigned char *) getenv("EEprom_ivm_addr"); - if (buf != NULL) { - ret = strict_strtoul((char *)buf, 16, &dev_addr); - if (ret != 0) - return -3; - } - /* add deblocking here */ i2c_make_abort(); diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c index 67b69f6cb3..f98844d317 100644 --- a/board/keymile/km82xx/km82xx.c +++ b/board/keymile/km82xx/km82xx.c @@ -31,10 +31,7 @@ #include <libfdt.h> #endif -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) #include <i2c.h> -#endif - #include "../common/common.h" /* @@ -370,7 +367,7 @@ static void set_pin(int state, unsigned long mask); * will toggle once what forces the mgocge3un part to restart * immediately. */ -void handle_mgcoge3un_reset(void) +static void handle_mgcoge3un_reset(void) { char *bobcatreset = getenv("bobcatreset"); if (bobcatreset) { @@ -385,6 +382,14 @@ void handle_mgcoge3un_reset(void) } #endif +int ethernet_present(void) +{ + struct km_bec_fpga *base = + (struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE; + + return in_8(&base->bprth) & PIGGY_PRESENT; +} + /* * Early board initalization. */ diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index 83a8753e5a..faaa39bc20 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -98,17 +98,13 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { static int board_init_i2c_busses(void) { I2C_MUX_DEVICE *dev = NULL; - uchar *buf; + uchar *dtt_bus = (uchar *)"pca9547:70:a"; /* Set up the Bus for the DTTs */ - buf = (unsigned char *) getenv("dtt_bus"); - if (buf != NULL) - dev = i2c_mux_ident_muxstring(buf); - if (dev == NULL) { + dev = i2c_mux_ident_muxstring(dtt_bus); + if (dev == NULL) printf("Error couldn't add Bus for DTT\n"); - printf("please setup dtt_bus to where your\n"); - printf("DTT is found.\n"); - } + return 0; } @@ -133,6 +129,28 @@ const uint upma_table[] = { }; #endif +static int piggy_present(void) +{ + struct km_bec_fpga __iomem *base = + (struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE; + + return in_8(&base->bprth) & PIGGY_PRESENT; +} + +#if defined(CONFIG_KMVECT1) +int ethernet_present(void) +{ + /* ethernet port connected to simple switch without piggy */ + return 1; +} +#else +int ethernet_present(void) +{ + return piggy_present(); +} +#endif + + int board_early_init_r(void) { struct km_bec_fpga *base = @@ -193,8 +211,75 @@ int misc_init_r(void) return 0; } +#if defined(CONFIG_KMVECT1) +#include <mv88e6352.h> +/* Marvell MV88E6122 switch configuration */ +static struct mv88e_sw_reg extsw_conf[] = { + /* port 1, FRONT_MDI, autoneg */ + { PORT(1), PORT_PHY, NO_SPEED_FOR }, + { PORT(1), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, + { PHY(1), PHY_1000_CTRL, NO_ADV }, + { PHY(1), PHY_SPEC_CTRL, AUTO_MDIX_EN }, + { PHY(1), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST | + FULL_DUPLEX }, + /* port 2, unused */ + { PORT(2), PORT_CTRL, PORT_DIS }, + { PHY(2), PHY_CTRL, PHY_PWR_DOWN }, + { PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN }, + /* port 3, BP_MII (CPU), PHY mode, 100BASE */ + { PORT(3), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, + /* port 4, ESTAR to slot 11, SerDes, 1000BASE-X */ + { PORT(4), PORT_STATUS, NO_PHY_DETECT }, + { PORT(4), PORT_PHY, SPEED_1000_FOR }, + { PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, + /* port 5, ESTAR to slot 13, SerDes, 1000BASE-X */ + { PORT(5), PORT_STATUS, NO_PHY_DETECT }, + { PORT(5), PORT_PHY, SPEED_1000_FOR }, + { PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, + /* + * Errata Fix: 1.9V Output from Internal 1.8V Regulator, + * acc . MV-S300889-00D.pdf , clause 4.5 + */ + { PORT(5), 0x1A, 0xADB1 }, + /* port 6, unused, this port has no phy */ + { PORT(6), PORT_CTRL, PORT_DIS }, +}; +#endif + int last_stage_init(void) { +#if defined(CONFIG_KMVECT1) + struct km_bec_fpga __iomem *base = + (struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE; + u8 tmp_reg; + + /* Release mv88e6122 from reset */ + tmp_reg = in_8(&base->res1[0]) | 0x10; /* DIRECT3 register */ + out_8(&base->res1[0], tmp_reg); /* GP28 as output */ + tmp_reg = in_8(&base->gprt3) | 0x10; /* GP28 to high */ + out_8(&base->gprt3, tmp_reg); + + /* configure MV88E6122 switch */ + char *name = "UEC2"; + + if (miiphy_set_current_dev(name)) + return 0; + + mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf, + ARRAY_SIZE(extsw_conf)); + + mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR); + + if (piggy_present()) { + setenv("ethact", "UEC2"); + setenv("netdev", "eth1"); + puts("using PIGGY for network boot\n"); + } else { + setenv("netdev", "eth0"); + puts("using frontport for network boot\n"); + } +#endif + #if defined(CONFIG_KMCOGE5NE) struct bfticu_iomap *base = (struct bfticu_iomap *)CONFIG_SYS_BFTIC3_BASE; @@ -280,7 +365,7 @@ int checkboard(void) { puts("Board: Keymile " CONFIG_KM_BOARD_NAME); - if (ethernet_present()) + if (piggy_present()) puts(" with PIGGY."); puts("\n"); return 0; diff --git a/board/keymile/scripts/develop-common.txt b/board/keymile/scripts/develop-common.txt index aa3d659527..a6bb1b1d4a 100644 --- a/board/keymile/scripts/develop-common.txt +++ b/board/keymile/scripts/develop-common.txt @@ -1,8 +1,9 @@ altbootcmd=run ${subbootcmds} bootcmd=run ${subbootcmds} -configure=km_setboardid && saveenv && reset +configure=run set_uimage; km_setboardid && saveenv && reset subbootcmds=tftpfdt tftpkernel nfsargs add_default boot nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${toolchain}/${arch} -tftpkernel=tftpboot ${load_addr_r} ${hostname}/uImage +tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage} toolchain=/opt/eldk rootfssize=0 +set_uimage=printenv uimage || setenv uimage uImage diff --git a/board/keymile/scripts/ramfs-common.txt b/board/keymile/scripts/ramfs-common.txt index c1b45ab029..8a8d287558 100644 --- a/board/keymile/scripts/ramfs-common.txt +++ b/board/keymile/scripts/ramfs-common.txt @@ -4,8 +4,9 @@ altbootcmd=run ${subbootcmds} bootcmd=run ${subbootcmds} subbootcmds=tftpfdt tftpkernel setrootfsaddr tftpramfs flashargs add_default addpanic addramfs boot nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} -configure=km_setboardid && saveenv && reset +configure=run set_uimage; km_setboardid && saveenv && reset rootfsfile=${hostname}/rootfsImage setrootfsaddr=setexpr value ${pnvramaddr} - ${rootfssize} && setenv rootfsaddr 0x${value} -tftpkernel=tftpboot ${load_addr_r} ${hostname}/uImage +tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage} tftpramfs=tftpboot ${rootfsaddr} ${hostname}/rootfsImage +set_uimage=printenv uimage || setenv uimage uImage diff --git a/board/korat/u-boot-F7FC.lds b/board/korat/u-boot-F7FC.lds index 033cff42d9..52c929cab9 100644 --- a/board/korat/u-boot-F7FC.lds +++ b/board/korat/u-boot-F7FC.lds @@ -110,7 +110,7 @@ SECTIONS . = .; .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -135,6 +135,6 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/kup/kup4k/u-boot.lds b/board/kup/kup4k/u-boot.lds index 18f962cfa5..3334a44f61 100644 --- a/board/kup/kup4k/u-boot.lds +++ b/board/kup/kup4k/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/kup/kup4k/u-boot.lds.debug b/board/kup/kup4k/u-boot.lds.debug index b43a1e4281..88c410cd92 100644 --- a/board/kup/kup4k/u-boot.lds.debug +++ b/board/kup/kup4k/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/kup/kup4x/u-boot.lds b/board/kup/kup4x/u-boot.lds index 18f962cfa5..3334a44f61 100644 --- a/board/kup/kup4x/u-boot.lds +++ b/board/kup/kup4x/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/kup/kup4x/u-boot.lds.debug b/board/kup/kup4x/u-boot.lds.debug index b43a1e4281..88c410cd92 100644 --- a/board/kup/kup4x/u-boot.lds.debug +++ b/board/kup/kup4x/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c index 0b3721ed85..65e1b78457 100644 --- a/board/logicpd/am3517evm/am3517evm.c +++ b/board/logicpd/am3517evm/am3517evm.c @@ -135,8 +135,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c index 12bcfcb877..6e83aa2094 100644 --- a/board/logicpd/omap3som/omap3logic.c +++ b/board/logicpd/omap3som/omap3logic.c @@ -140,7 +140,7 @@ int board_init(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c index 90b6b0fde5..c79a261d23 100644 --- a/board/logicpd/zoom1/zoom1.c +++ b/board/logicpd/zoom1/zoom1.c @@ -92,8 +92,7 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c index 8e18019801..ad6ae36696 100644 --- a/board/logicpd/zoom2/zoom2.c +++ b/board/logicpd/zoom2/zoom2.c @@ -183,8 +183,7 @@ void set_muxconf_regs (void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/lwmon/u-boot.lds b/board/lwmon/u-boot.lds index bc71b0d2c1..ce11a91da6 100644 --- a/board/lwmon/u-boot.lds +++ b/board/lwmon/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/lwmon/u-boot.lds.debug b/board/lwmon/u-boot.lds.debug index 0a3e6466a9..1d1b76ad7c 100644 --- a/board/lwmon/u-boot.lds.debug +++ b/board/lwmon/u-boot.lds.debug @@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/manroland/uc100/u-boot.lds b/board/manroland/uc100/u-boot.lds index e32ae37ea4..d1bb127888 100644 --- a/board/manroland/uc100/u-boot.lds +++ b/board/manroland/uc100/u-boot.lds @@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -96,6 +96,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/matrix_vision/mvblx/fpga.c b/board/matrix_vision/mvblx/fpga.c index dacc13845d..3fcf9685e9 100644 --- a/board/matrix_vision/mvblx/fpga.c +++ b/board/matrix_vision/mvblx/fpga.c @@ -31,6 +31,7 @@ #include <ACEX1K.h> #include <command.h> #include <asm/gpio.h> +#include <linux/byteorder/generic.h> #include "fpga.h" #ifdef FPGA_DEBUG @@ -209,9 +210,20 @@ int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie) { unsigned char *data = (unsigned char *) buf; int i; + int headerlen = len - cyclone2.size; + + if (headerlen < 0) + return FPGA_FAIL; + else if (headerlen == sizeof(uint32_t)) { + const unsigned int fpgavers_len = 11; /* '0x' + 8 hex digits + \0 */ + char fpgavers_str[fpgavers_len]; + snprintf(fpgavers_str, fpgavers_len, "0x%08x", + be32_to_cpup((uint32_t*)data)); + setenv("fpgavers", fpgavers_str); + } fpga_debug("fpga_wr: buf %p / size %d\n", buf, len); - for (i = 0; i < len; i++) + for (i = headerlen; i < len; i++) _write_fpga(data[i]); fpga_debug("-%s\n", __func__); diff --git a/board/matrix_vision/mvblx/mvblx.c b/board/matrix_vision/mvblx/mvblx.c index f68f312215..49af384aaa 100644 --- a/board/matrix_vision/mvblx/mvblx.c +++ b/board/matrix_vision/mvblx/mvblx.c @@ -106,8 +106,8 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - omap_mmc_init(1, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); return 0; } #endif diff --git a/board/matrix_vision/mvblx/sys_eeprom.c b/board/matrix_vision/mvblx/sys_eeprom.c index 945a36dfe6..15269c6d7a 100644 --- a/board/matrix_vision/mvblx/sys_eeprom.c +++ b/board/matrix_vision/mvblx/sys_eeprom.c @@ -326,10 +326,28 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } +static inline int is_portrait(void) +{ + int i; + unsigned int orient_index = 0; /* idx of char which determines orientation */ + + for (i = sizeof(e.id)/sizeof(*e.id) - 1; i>=0; i--) { + if (e.id[i] == '-') { + orient_index = i+1; + break; + } + } + + return (orient_index && + (e.id[orient_index] >= '5') && (e.id[orient_index] <= '8')); +} + int mac_read_from_eeprom(void) { u32 crc, crc_offset = offsetof(struct eeprom, crc); u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */ +#define FILENAME_LANDSCAPE "mvBlueLynx_X.rbf" +#define FILENAME_PORTRAIT "mvBlueLynx_X_sensor_cd.rbf" if (read_eeprom()) { printf("EEPROM Read failed.\n"); @@ -374,6 +392,12 @@ int mac_read_from_eeprom(void) setenv("serial#", serial_num); } + /* decide which fpga file to load depending on orientation */ + if (is_portrait()) + setenv("fpgafilename", FILENAME_PORTRAIT); + else + setenv("fpgafilename", FILENAME_LANDSCAPE); + /* TODO should I calculate CRC here? */ return 0; } diff --git a/board/matrix_vision/mvsmr/u-boot.lds b/board/matrix_vision/mvsmr/u-boot.lds index 5a3a9eabbf..3225c0bb2a 100644 --- a/board/matrix_vision/mvsmr/u-boot.lds +++ b/board/matrix_vision/mvsmr/u-boot.lds @@ -77,7 +77,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -100,6 +100,6 @@ SECTIONS *(.sbss*) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/mbx8xx/u-boot.lds b/board/mbx8xx/u-boot.lds index 18f962cfa5..3334a44f61 100644 --- a/board/mbx8xx/u-boot.lds +++ b/board/mbx8xx/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/mbx8xx/u-boot.lds.debug b/board/mbx8xx/u-boot.lds.debug index 4155b604fb..063f2cc92f 100644 --- a/board/mbx8xx/u-boot.lds.debug +++ b/board/mbx8xx/u-boot.lds.debug @@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/mousse/u-boot.lds b/board/mousse/u-boot.lds index 43f91f1a3c..17ff94e5da 100644 --- a/board/mousse/u-boot.lds +++ b/board/mousse/u-boot.lds @@ -63,7 +63,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -88,6 +88,6 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/mpl/pip405/u-boot.lds.debug b/board/mpl/pip405/u-boot.lds.debug index d7a2e56008..99cbed4b47 100644 --- a/board/mpl/pip405/u-boot.lds.debug +++ b/board/mpl/pip405/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/mvblue/u-boot.lds b/board/mvblue/u-boot.lds index c378564f6d..adbb5f9dac 100644 --- a/board/mvblue/u-boot.lds +++ b/board/mvblue/u-boot.lds @@ -73,7 +73,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -97,6 +97,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/netphone/u-boot.lds b/board/netphone/u-boot.lds index cdc1fdac2c..03891e937f 100644 --- a/board/netphone/u-boot.lds +++ b/board/netphone/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/netphone/u-boot.lds.debug b/board/netphone/u-boot.lds.debug index 900da64859..e1fe052c37 100644 --- a/board/netphone/u-boot.lds.debug +++ b/board/netphone/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/netta/u-boot.lds b/board/netta/u-boot.lds index cdc1fdac2c..03891e937f 100644 --- a/board/netta/u-boot.lds +++ b/board/netta/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/netta/u-boot.lds.debug b/board/netta/u-boot.lds.debug index 900da64859..e1fe052c37 100644 --- a/board/netta/u-boot.lds.debug +++ b/board/netta/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/netta2/u-boot.lds b/board/netta2/u-boot.lds index cdc1fdac2c..03891e937f 100644 --- a/board/netta2/u-boot.lds +++ b/board/netta2/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/netta2/u-boot.lds.debug b/board/netta2/u-boot.lds.debug index 900da64859..e1fe052c37 100644 --- a/board/netta2/u-boot.lds.debug +++ b/board/netta2/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/netvia/u-boot.lds b/board/netvia/u-boot.lds index cdc1fdac2c..03891e937f 100644 --- a/board/netvia/u-boot.lds +++ b/board/netvia/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/netvia/u-boot.lds.debug b/board/netvia/u-boot.lds.debug index 6cbf4dc66e..3243fc0f36 100644 --- a/board/netvia/u-boot.lds.debug +++ b/board/netvia/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c index b2fe1c531a..48eb65f896 100644 --- a/board/nokia/rx51/rx51.c +++ b/board/nokia/rx51/rx51.c @@ -671,7 +671,7 @@ int rx51_kp_getc(void) */ int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - omap_mmc_init(1, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); return 0; } diff --git a/board/ns9750dev/config.mk b/board/ns9750dev/config.mk deleted file mode 100644 index e5d87029d3..0000000000 --- a/board/ns9750dev/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -####################################################################### -# -# Copyright (C) 2004 by FS Forth-Systeme GmbH. -# Markus Pietrek <mpietrek@fsforth.de> -# -# @TODO -# Linux-Kernel is expected to be at 0000'8000, entry 0000'8000 -# optionally with a ramdisk at 0080'0000 -# -# we load ourself to 0078'0000 -# -# download area is 0060'0000 -# - - -CONFIG_SYS_TEXT_BASE = 0x00780000 diff --git a/board/ns9750dev/flash.c b/board/ns9750dev/flash.c deleted file mode 100644 index 185bc2d73a..0000000000 --- a/board/ns9750dev/flash.c +++ /dev/null @@ -1,474 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <linux/byteorder/swab.h> - -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* Board support for 1 or 2 flash devices */ -#undef FLASH_PORT_WIDTH32 -#define FLASH_PORT_WIDTH16 - -#ifdef FLASH_PORT_WIDTH16 -#define FLASH_PORT_WIDTH ushort -#define FLASH_PORT_WIDTHV vu_short -#define SWAP(x) __swab16(x) -#else -#define FLASH_PORT_WIDTH ulong -#define FLASH_PORT_WIDTHV vu_long -#define SWAP(x) __swab32(x) -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define mb() __asm__ __volatile__ ("" : : : "memory") - - -/* Flash Organization Structure */ -typedef struct OrgDef { - unsigned int sector_number; - unsigned int sector_size; -} OrgDef; - - -/* Flash Organizations */ -OrgDef OrgIntel_28F256L18T[] = { - {4, 32 * 1024}, /* 4 * 32kBytes sectors */ - {255, 128 * 1024}, /* 255 * 128kBytes sectors */ -}; - - -/*----------------------------------------------------------------------- - * Functions - */ -unsigned long flash_init (void); -static ulong flash_get_size (FPW * addr, flash_info_t * info); -static int write_data (flash_info_t * info, ulong dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t * info); -void inline spin_wheel (void); -void flash_print_info (flash_info_t * info); -void flash_unprotect_sectors (FPWV * addr); -int flash_erase (flash_info_t * info, int s_first, int s_last); -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]); - - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - int i; - OrgDef *pOrgDef; - - pOrgDef = OrgIntel_28F256L18T; - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - if (i > 255) { - info->start[i] = base + (i * 0x8000); - info->protect[i] = 0; - } else { - info->start[i] = base + - (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F256L18T: - printf ("FLASH 28F256L18T\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW * addr, flash_info_t * info) -{ - volatile FPW value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = (FPW) 0x00AA00AA; - addr[0x2AAA] = (FPW) 0x00550055; - addr[0x5555] = (FPW) 0x00900090; - - mb (); - value = addr[0]; - - switch (value) { - - case (FPW) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - mb (); - value = addr[1]; /* device ID */ - switch (value) { - - case (FPW) (INTEL_ID_28F256L18T): - info->flash_id += FLASH_28F256L18T; - info->sector_count = 259; - info->size = 0x02000000; - break; /* => 32 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ - - return (info->size); -} - - -/* unprotects a sector for write and erase - * on some intel parts, this unprotects the entire chip, but it - * wont hurt to call this additional times per sector... - */ -void flash_unprotect_sectors (FPWV * addr) -{ -#define PD_FINTEL_WSMS_READY_MASK 0x0080 - - *addr = (FPW) 0x00500050; /* clear status register */ - - /* this sends the clear lock bit command */ - *addr = (FPW) 0x00600060; - *addr = (FPW) 0x00D000D0; -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect; - ulong type, start; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - flash_unprotect_sectors (addr); - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - *addr = (FPW) 0x00500050;/* clear status register */ - *addr = (FPW) 0x00200020;/* erase setup */ - *addr = (FPW) 0x00D000D0;/* erase confirm */ - - while (((status = - *addr) & (FPW) 0x00800080) != - (FPW) 0x00800080) { - if (get_timer(start) > - CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - /* suspend erase */ - *addr = (FPW) 0x00B000B0; - /* reset to read mode */ - *addr = (FPW) 0x00FF00FF; - rcode = 1; - break; - } - } - - /* clear status register cmd. */ - *addr = (FPW) 0x00500050; - *addr = (FPW) 0x00FF00FF;/* resest to read mode */ - printf (" done\n"); - } - } - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } -/* get lower word aligned address */ -#ifdef FLASH_PORT_WIDTH16 - wp = (addr & ~1); - port_width = 2; -#else - wp = (addr & ~3); - port_width = 4; -#endif - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_data (info, wp, SWAP (data))); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t * info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong status; - int flag; - ulong start; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); - return (2); - } - flash_unprotect_sectors (addr); - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - *addr = (FPW) 0x00400040; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - start = get_timer(0); - - /* wait while polling the status register */ - while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (1); - } - } - *addr = (FPW) 0x00FF00FF; /* restore read mode */ - return (0); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} diff --git a/board/ns9750dev/led.c b/board/ns9750dev/led.c deleted file mode 100644 index b85c869d85..0000000000 --- a/board/ns9750dev/led.c +++ /dev/null @@ -1,46 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: led.c,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Defines helper functions for toggeling LEDs - * @Usage: - * @References: [1] - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#ifdef CONFIG_STATUS_LED - -#include <ns9750_bbus.h> - -static inline void __led_init( led_id_t mask, int state ) -{ - XXXX; -} - -static inline void __led_toggle( led_id_t mask ) -{ -} - -static inline void __led_set( led_id_t mask, int state ) -{ -} - -#endif /* CONFIG_STATUS_LED */ diff --git a/board/ns9750dev/lowlevel_init.S b/board/ns9750dev/lowlevel_init.S deleted file mode 100644 index ba5ff8124e..0000000000 --- a/board/ns9750dev/lowlevel_init.S +++ /dev/null @@ -1,298 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * Modified for the NS9750 DevBoard by - * (C) Copyright 2004 by FS Forth-Systeme GmbH. - * Markus Pietrek <mpietrek@fsforth.de> - * @References: [1] NS9750 Hardware Reference/December 2003 - * [2] ns9750_a.cmd from MAJIC configuration - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> - -#if defined(CONFIG_NS9750DEV) -# ifndef CONFIG_SKIP_LOWLEVEL_INIT -# include <./ns9750_sys.h> -# include <./ns9750_mem.h> -# endif -#endif - -/*********************************************************************** - * @Function: write_register_block - * @Return: nothing - * @Descr: Copies the register block of register_offset:register value to - * the registers at base r0. The block is assumed to start in RAM at r1 - * and end at r2. The linked RAM base address of U-Boot is assumed to be - * in r5 while the ROM base address we are running from is r6 - * Uses r3 and r4 as tempory registers - ***********************************************************************/ - -.macro write_register_block - @@ map the addresses to high memory - sub r1, r1, r5 - add r1, r1, r6 - sub r2, r2, r5 - add r2, r2, r6 - - @@ copy all -1: - @@ Write register/value pair starting at [r1] to register base r0 - ldr r3, [r1], #4 - ldr r4, [r1], #4 - str r4, [r0,r3] - cmp r1, r2 - blt 1b -.endm - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE @ sdram load addr from config.mk -_PHYS_FLASH: - .word PHYS_FLASH_1 @ real flash address (without mirroring) -_CAS_LATENCY: - .word 0x00022000 @ for CAS2 latency - -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -.globl lowlevel_init -lowlevel_init: - - /* U-Boot may be linked to RAM at 0x780000. But this code will run in - flash from 0x0. But in order to enable RAM we have to disable the - mirror bit, therefore we have to jump to our real flash address - beginning at PHYS_FLASH_1 (CS4 Base). Therefore, - _run_at_real_flash_address may be 0x500003b0 while be linked to - 0x7803b0. So we must modify our linked addresses */ - - @@ branch to high memory address, away from 0x0 - ldr r5, _TEXT_BASE - ldr r6, _PHYS_FLASH - ldr r0, =_run_at_real_flash_address - sub r0, r0, r5 - add r0, r0, r6 - mov pc, r0 - nop @ for pipelining - -_run_at_real_flash_address: - @@ now we are running > PHYS_FLASH_1, safe to enable memory controller - - @@ Write Memory Configuration Registers - - ldr r0, _NS9750_MEM_MODULE_BASE - ldr r1, =_MEM_CONFIG_START - ldr r2, =_MEM_CONFIG_END - - write_register_block - - @@ Give SDRAM some time to settle - @@ @TODO. According to [2] it should be 2 AHB cycles. Check - - ldr r1, =0x50 -_sdram_settle: - subs r1, r1, #1 - bne _sdram_settle - -_enable_mappings: - @@ Enable SDRAM Mode - - ldr r1, =_MEM_MODE_START - ldr r2, =_MEM_MODE_END - - write_register_block - - ldr r3, _CAS_LATENCY @ perform one read from SDRAM - ldr r3, [r3] - - @@ Enable SDRAM and memory mappings - - ldr r1, =_MEM_ENABLE_START - ldr r2, =_MEM_ENABLE_END - - write_register_block - - @@ Activate AHB monitor - - ldr r0, =NS9750_SYS_MODULE_BASE - ldr r1, =_AHB_MONITOR_START - ldr r2, =_AHB_MONITOR_END - - write_register_block -_relocate_lr: - /* lr and ip (from cpu_init_crit) are still based on 0x0, relocate it to - PHYS_FLASH. */ - mov r1, ip - add r1, r1, r6 - mov ip, r1 - - mov r1, lr - add r1, r1, r6 - mov lr, r1 - - @@ back to arch calling code - mov pc, lr - - .ltorg - -_NS9750_MEM_MODULE_BASE: - .word NS9750_MEM_MODULE_BASE - -_MEM_CONFIG_START: - /* Table of 2 32bit entries. First word is register address offset - relative to NS9750_MEM_MODULE_BASE, second one is value. They are - written in order of appearance */ - - @@ Register values taken from [2] - .word NS9750_MEM_CTRL - .word NS9750_MEM_CTRL_E - - .word NS9750_MEM_DYN_REFRESH - .word (0x6 & NS9750_MEM_DYN_REFRESH_MA) - - .word NS9750_MEM_DYN_READ_CFG - .word (0x1 & NS9750_MEM_DYN_READ_CFG_MA) - - .word NS9750_MEM_DYN_TRP - .word (0x1 & NS9750_MEM_DYN_TRP_MA) - - .word NS9750_MEM_DYN_TRAS - .word (0x4 & NS9750_MEM_DYN_TRAS_MA) - - .word NS9750_MEM_DYN_TAPR - .word (0x1 & NS9750_MEM_DYN_TRAS_MA) - - .word NS9750_MEM_DYN_TDAL - .word (0x5 & NS9750_MEM_DYN_TDAL_MA) - - .word NS9750_MEM_DYN_TWR - .word (0x1 & NS9750_MEM_DYN_TWR_MA) - - .word NS9750_MEM_DYN_TRC - .word (0x6 & NS9750_MEM_DYN_TRC_MA) - - .word NS9750_MEM_DYN_TRFC - .word (0x6 & NS9750_MEM_DYN_TRFC_MA) - - .word NS9750_MEM_DYN_TRRD - .word (0x1 & NS9750_MEM_DYN_TRRD_MA) - - .word NS9750_MEM_DYN_TMRD - .word (0x1 & NS9750_MEM_DYN_TMRD_MA) - - @@ CS 4 - .word NS9750_MEM_DYN_CFG(0) - .word (NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - .word NS9750_MEM_DYN_RAS_CAS(0) - .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \ - (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA)) - - @@ CS 5 - .word NS9750_MEM_DYN_CFG(1) - .word (NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - .word NS9750_MEM_DYN_RAS_CAS(1) - .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \ - (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA)) - - @@ CS 6 - .word NS9750_MEM_DYN_CFG(2) - .word (NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - .word NS9750_MEM_DYN_RAS_CAS(2) - .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \ - (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA)) - - @@ CS 7 - .word NS9750_MEM_DYN_CFG(3) - .word (NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - .word NS9750_MEM_DYN_RAS_CAS(3) - .word ((0x200 & NS9750_MEM_DYN_RAS_CAS_CAS_MA) | \ - (0x03 & NS9750_MEM_DYN_RAS_CAS_RAS_MA)) - - .word NS9750_MEM_DYN_CTRL - .word (NS9750_MEM_DYN_CTRL_I_PALL | \ - NS9750_MEM_DYN_CTRL_SR | \ - NS9750_MEM_DYN_CTRL_CE ) - - .word NS9750_MEM_DYN_REFRESH - .word (0x1 & NS9750_MEM_DYN_REFRESH_MA) - @@ No further register settings after refresh -_MEM_CONFIG_END: - -_MEM_MODE_START: - .word NS9750_MEM_DYN_REFRESH - .word (0x30 & NS9750_MEM_DYN_REFRESH_MA) - - .word NS9750_MEM_DYN_CTRL - .word (NS9750_MEM_DYN_CTRL_I_MODE | \ - NS9750_MEM_DYN_CTRL_SR | \ - NS9750_MEM_DYN_CTRL_CE ) -_MEM_MODE_END: - -_MEM_ENABLE_START: - .word NS9750_MEM_DYN_CTRL - .word (NS9750_MEM_DYN_CTRL_I_NORMAL | \ - NS9750_MEM_DYN_CTRL_SR | \ - NS9750_MEM_DYN_CTRL_CE ) - - @@ CS 4 - .word NS9750_MEM_DYN_CFG(0) - .word (NS9750_MEM_DYN_CFG_BDMC | \ - NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - @@ CS 5 - .word NS9750_MEM_DYN_CFG(1) - .word (NS9750_MEM_DYN_CFG_BDMC | \ - NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - @@ CS 6 - .word NS9750_MEM_DYN_CFG(2) - .word (NS9750_MEM_DYN_CFG_BDMC | \ - NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) - - @@ CS 7 - .word NS9750_MEM_DYN_CFG(3) - .word (NS9750_MEM_DYN_CFG_BDMC | \ - NS9750_MEM_DYN_CFG_AM | \ - (0x280 & NS9750_MEM_DYN_CFG_AM_MA)) -_MEM_ENABLE_END: - -_AHB_MONITOR_START: - .word NS9750_SYS_AHB_TIMEOUT - .word 0x01000100 @ @TODO not calculated yet - - .word NS9750_SYS_AHB_MON - .word (NS9750_SYS_AHB_MON_BMTC_GEN_IRQ | \ - NS9750_SYS_AHB_MON_BATC_GEN_IRQ) -_AHB_MONITOR_END: - -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/board/ns9750dev/ns9750dev.c b/board/ns9750dev/ns9750dev.c deleted file mode 100644 index fc46244c74..0000000000 --- a/board/ns9750dev/ns9750dev.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * Markus Pietrek <mpietrek@fsforth.de> - * derived from omap1610innovator.c - * @References: [1] NS9750 Hardware Reference/December 2003 - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#if defined(CONFIG_NS9750DEV) -# include <./configs/ns9750dev.h> -# include <./ns9750_bbus.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -void flash__init( void ); -void ether__init( void ); - -static inline void delay( unsigned long loops ) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - - -/*********************************************************************** - * @Function: board_init - * @Return: 0 - * @Descr: Enables BBUS modules and other devices - ***********************************************************************/ - -int board_init( void ) -{ - /* Active BBUS modules */ - *get_bbus_reg_addr( NS9750_BBUS_MASTER_RESET ) = 0; - -#warning Please register your machine at http://www.arm.linux.org.uk/developer/machines/?action=new - /* arch number of OMAP 1510-Board */ - /* to be changed for OMAP 1610 Board */ - gd->bd->bi_arch_number = 234; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x10000100; - - -/* this speeds up your boot a quite a bit. However to make it - * work, you need make sure your kernel startup flush bug is fixed. - * ... rkw ... - */ - icache_enable(); - - flash__init(); - ether__init(); - return 0; -} - - -int misc_init_r (void) -{ - /* currently empty */ - return (0); -} - -/****************************** - Routine: - Description: -******************************/ -void flash__init (void) -{ -} -/************************************************************* - Routine:ether__init - Description: take the Ethernet controller out of reset and wait - for the EEPROM load to complete. -*************************************************************/ -void ether__init (void) -{ -} - -/****************************** - Routine: - Description: -******************************/ -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - -#if CONFIG_NR_DRAM_BANKS > 1 - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; -#endif - return 0; -} diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c index df4cb6b728..3544b41cd0 100644 --- a/board/nvidia/cardhu/cardhu.c +++ b/board/nvidia/cardhu/cardhu.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2010-2012 + * (C) Copyright 2010-2013 * NVIDIA Corporation <www.nvidia.com> * * See file CREDITS for list of people who contributed to this @@ -23,7 +23,12 @@ #include <common.h> #include <asm/arch/pinmux.h> +#include <asm/arch/gp_padctrl.h> #include "pinmux-config-cardhu.h" +#include <i2c.h> + +#define PMU_I2C_ADDRESS 0x2D +#define MAX_I2C_RETRY 3 /* * Routine: pinmux_init @@ -36,4 +41,54 @@ void pinmux_init(void) pinmux_config_table(unused_pins_lowpower, ARRAY_SIZE(unused_pins_lowpower)); + + /* Initialize any non-default pad configs (APB_MISC_GP regs) */ + padgrp_config_table(cardhu_padctrl, ARRAY_SIZE(cardhu_padctrl)); +} + +#if defined(CONFIG_TEGRA_MMC) +/* + * Do I2C/PMU writes to bring up SD card bus power + * + */ +void board_sdmmc_voltage_init(void) +{ + uchar reg, data_buffer[1]; + int i; + + i2c_set_bus_num(0); /* PMU is on bus 0 */ + + /* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 */ + data_buffer[0] = 0x65; + reg = 0x32; + + for (i = 0; i < MAX_I2C_RETRY; ++i) { + if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1)) + udelay(100); + } + + /* TPS659110: GPIO7_REG = PDEN, output a 1 to EN_3V3_SYS */ + data_buffer[0] = 0x09; + reg = 0x67; + + for (i = 0; i < MAX_I2C_RETRY; ++i) { + if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1)) + udelay(100); + } +} + +/* + * Routine: pin_mux_mmc + * Description: setup the MMC muxes, power rails, etc. + */ +void pin_mux_mmc(void) +{ + /* + * NOTE: We don't do mmc-specific pin muxes here. + * They were done globally in pinmux_init(). + */ + + /* Bring up the SDIO1 power rail */ + board_sdmmc_voltage_init(); } +#endif /* MMC */ diff --git a/board/nvidia/cardhu/cardhu.c.mmc b/board/nvidia/cardhu/cardhu.c.mmc deleted file mode 100644 index 9e83b6fc00..0000000000 --- a/board/nvidia/cardhu/cardhu.c.mmc +++ /dev/null @@ -1,151 +0,0 @@ -/* - * (C) Copyright 2010-2012 - * NVIDIA Corporation <www.nvidia.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/pinmux.h> -#include "pinmux-config-cardhu.h" - -#include <asm/arch/clock.h> -#include <asm/arch/gp_padctrl.h> -#include <asm/arch/pmu.h> -#include <asm/arch/sdmmc.h> -#include <asm/arch-tegra/mmc.h> -#include <asm/arch-tegra/tegra_mmc.h> -#include <mmc.h> -#include <i2c.h> - -/* - * Routine: pinmux_init - * Description: Do individual peripheral pinmux configs - */ -void pinmux_init(void) -{ - pinmux_config_table(tegra3_pinmux_common, - ARRAY_SIZE(tegra3_pinmux_common)); - - pinmux_config_table(unused_pins_lowpower, - ARRAY_SIZE(unused_pins_lowpower)); -} - -#if defined(CONFIG_MMC) -/* - * Routine: pin_mux_mmc - * Description: setup the pin muxes/tristate values for the SDMMC(s) - */ -static void pin_mux_mmc(void) -{ -} - -/* Do I2C/PMU writes to bring up SD card bus power */ -static void board_sdmmc_voltage_init(void) -{ - uchar reg, data_buffer[1]; - int i; - - i2c_set_bus_num(0); /* PMU is on bus 0 */ - - data_buffer[0] = 0x65; - reg = 0x32; - - for (i = 0; i < MAX_I2C_RETRY; ++i) { - if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1)) - udelay(100); - } - - data_buffer[0] = 0x09; - reg = 0x67; - - for (i = 0; i < MAX_I2C_RETRY; ++i) { - if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1)) - udelay(100); - } -} - -static void pad_init_mmc(struct tegra_mmc *reg) -{ - struct apb_misc_gp_ctlr *const gpc = - (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE; - struct sdmmc_ctlr *const sdmmc = (struct sdmmc_ctlr *)reg; - u32 val, offset = (unsigned int)reg; - u32 padcfg, padmask; - - debug("%s: sdmmc address = %08x\n", __func__, (unsigned int)sdmmc); - - /* Set the pad drive strength for SDMMC1 or 3 only */ - if (offset != TEGRA_SDMMC1_BASE && offset != TEGRA_SDMMC3_BASE) { - debug("%s: settings are only valid for SDMMC1/SDMMC3!\n", - __func__); - return; - } - - /* Set pads as per T30 TRM, section 24.6.1.2 */ - padcfg = (GP_SDIOCFG_DRVUP_SLWF | GP_SDIOCFG_DRVDN_SLWR | \ - GP_SDIOCFG_DRVUP | GP_SDIOCFG_DRVDN); - padmask = 0x00000FFF; - if (offset == TEGRA_SDMMC1_BASE) { - val = readl(&gpc->sdio1cfg); - val &= padmask; - val |= padcfg; - writel(val, &gpc->sdio1cfg); - } else { /* SDMMC3 */ - val = readl(&gpc->sdio3cfg); - val &= padmask; - val |= padcfg; - writel(val, &gpc->sdio3cfg); - } - - val = readl(&sdmmc->sdmmc_sdmemcomp_pad_ctrl); - val &= 0xFFFFFFF0; - val |= MEMCOMP_PADCTRL_VREF; - writel(val, &sdmmc->sdmmc_sdmemcomp_pad_ctrl); - - val = readl(&sdmmc->sdmmc_auto_cal_config); - val &= 0xFFFF0000; - val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED; - writel(val, &sdmmc->sdmmc_auto_cal_config); -} - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) -{ - debug("board_mmc_init called\n"); - - /* Turn on SD-card bus power */ - board_sdmmc_voltage_init(); - - /* Set up the SDMMC pads as per the TRM */ - pad_init_mmc((struct tegra_mmc *)TEGRA_SDMMC1_BASE); - - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - /* init dev 0 (SDMMC4), ("HSMMC") with 8-bit bus */ - tegra_mmc_init(0, 8, -1, -1); - - /* init dev 1 (SDMMC0), ("SDIO") with 8-bit bus */ - tegra_mmc_init(1, 8, -1, -1); - - return 0; -} -#endif /* MMC */ diff --git a/board/nvidia/cardhu/pinmux-config-cardhu.h b/board/nvidia/cardhu/pinmux-config-cardhu.h index 8428bba783..51d2b9425c 100644 --- a/board/nvidia/cardhu/pinmux-config-cardhu.h +++ b/board/nvidia/cardhu/pinmux-config-cardhu.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -53,6 +53,18 @@ .ioreset = PMUX_PIN_IO_RESET_##_ioreset \ } +#define DEFAULT_PADCFG(_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \ + { \ + .padgrp = PDRIVE_PINGROUP_##_padgrp, \ + .slwf = _slwf, \ + .slwr = _slwr, \ + .drvup = _drvup, \ + .drvdn = _drvdn, \ + .lpmd = PGRP_LPMD_##_lpmd, \ + .schmt = PGRP_SCHMT_##_schmt, \ + .hsm = PGRP_HSM_##_hsm, \ + } + static struct pingroup_config tegra3_pinmux_common[] = { /* SDMMC1 pinmux */ DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT), @@ -326,4 +338,9 @@ static struct pingroup_config unused_pins_lowpower[] = { DEFAULT_PINMUX(GMI_DQS, NAND, NORMAL, TRISTATE, OUTPUT), }; -#endif /* _PINMUX_CONFIG_CARDHU_H_ */ +static struct padctrl_config cardhu_padctrl[] = { + /* (_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */ + DEFAULT_PADCFG(SDIO1, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR, \ + SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, DISABLE, DISABLE), +}; +#endif /* _PINMUX_CONFIG_CARDHU_H_ */ diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index d1d8a29cba..7d9f361a8a 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -46,7 +46,11 @@ #include <asm/arch/emc.h> #endif #ifdef CONFIG_USB_EHCI_TEGRA -#include <asm/arch/usb.h> +#include <asm/arch-tegra/usb.h> +#endif +#ifdef CONFIG_TEGRA_MMC +#include <asm/arch-tegra/tegra_mmc.h> +#include <asm/arch-tegra/mmc.h> #endif #include <i2c.h> #include <spi.h> @@ -221,3 +225,53 @@ int board_late_init(void) #endif return 0; } + +#if defined(CONFIG_TEGRA_MMC) +void __pin_mux_mmc(void) +{ +} + +void pin_mux_mmc(void) __attribute__((weak, alias("__pin_mux_mmc"))); + +/* this is a weak define that we are overriding */ +int board_mmc_init(bd_t *bd) +{ + debug("%s called\n", __func__); + + /* Enable muxes, etc. for SDMMC controllers */ + pin_mux_mmc(); + + debug("%s: init MMC\n", __func__); + tegra_mmc_init(); + + return 0; +} + +void pad_init_mmc(struct mmc_host *host) +{ +#if defined(CONFIG_TEGRA30) + enum periph_id id = host->mmc_id; + u32 val; + + debug("%s: sdmmc address = %08x, id = %d\n", __func__, + (unsigned int)host->reg, id); + + /* Set the pad drive strength for SDMMC1 or 3 only */ + if (id != PERIPH_ID_SDMMC1 && id != PERIPH_ID_SDMMC3) { + debug("%s: settings are only valid for SDMMC1/SDMMC3!\n", + __func__); + return; + } + + val = readl(&host->reg->sdmemcmppadctl); + val &= 0xFFFFFFF0; + val |= MEMCOMP_PADCTRL_VREF; + writel(val, &host->reg->sdmemcmppadctl); + + val = readl(&host->reg->autocalcfg); + val &= 0xFFFF0000; + val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED; + writel(val, &host->reg->autocalcfg); +#endif /* T30 */ +} +#endif /* MMC */ diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c index aca3c7d17b..2020a5f00d 100644 --- a/board/nvidia/dalmore/dalmore.c +++ b/board/nvidia/dalmore/dalmore.c @@ -24,6 +24,9 @@ */ void pinmux_init(void) { + pinmux_config_table(tegra114_pinmux_set_nontristate, + ARRAY_SIZE(tegra114_pinmux_set_nontristate)); + pinmux_config_table(tegra114_pinmux_common, ARRAY_SIZE(tegra114_pinmux_common)); diff --git a/board/nvidia/dalmore/pinmux-config-dalmore.h b/board/nvidia/dalmore/pinmux-config-dalmore.h index 3dd47da32d..3ef6f4eaf6 100644 --- a/board/nvidia/dalmore/pinmux-config-dalmore.h +++ b/board/nvidia/dalmore/pinmux-config-dalmore.h @@ -17,7 +17,7 @@ #ifndef _PINMUX_CONFIG_DALMORE_H_ #define _PINMUX_CONFIG_DALMORE_H_ -#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \ +#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \ { \ .pingroup = PINGRP_##_pingroup, \ .func = PMUX_FUNC_##_mux, \ @@ -41,7 +41,19 @@ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ } -#define LV_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \ +#define DDC_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _rcv_sel) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .rcv_sel = PMUX_PIN_RCV_SEL_##_rcv_sel, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define VI_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \ { \ .pingroup = PINGRP_##_pingroup, \ .func = PMUX_FUNC_##_mux, \ @@ -50,200 +62,303 @@ .io = PMUX_PIN_##_io, \ .lock = PMUX_PIN_LOCK_##_lock, \ .od = PMUX_PIN_OD_DEFAULT, \ - .ioreset = PMUX_PIN_IO_RESET_##_ioreset \ + .ioreset = PMUX_PIN_IO_RESET_##_ioreset \ + } + +#define CEC_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .od = PMUX_PIN_OD_##_od, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define USB_PINMUX CEC_PINMUX + +#define DEFAULT_PADCFG(_padgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \ + { \ + .padgrp = PDRIVE_PINGROUP_##_padgrp, \ + .slwf = _slwf, \ + .slwr = _slwr, \ + .drvup = _drvup, \ + .drvdn = _drvdn, \ + .lpmd = PGRP_LPMD_##_lpmd, \ + .schmt = PGRP_SCHMT_##_schmt, \ + .hsm = PGRP_HSM_##_hsm, \ } static struct pingroup_config tegra114_pinmux_common[] = { + /* EXTPERIPH1 pinmux */ + DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, OUTPUT), + + /* I2S0 pinmux */ + DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT), + + /* I2S1 pinmux */ + DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT), + + /* I2S3 pinmux */ + DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT), + + /* CLDVFS pinmux */ + DEFAULT_PINMUX(DVFS_PWM, CLDVFS, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(DVFS_CLK, CLDVFS, NORMAL, NORMAL, OUTPUT), + + /* ULPI pinmux */ + DEFAULT_PINMUX(ULPI_CLK, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA0, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA1, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA2, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA3, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA4, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA5, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA6, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA7, ULPI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DIR, ULPI, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(ULPI_NXT, ULPI, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(ULPI_STP, ULPI, NORMAL, NORMAL, OUTPUT), + + /* I2C3 pinmux */ + I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* VI pinmux */ + VI_PINMUX(CAM_MCLK, VI_ALT3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + + /* VI_ALT1 pinmux */ + VI_PINMUX(GPIO_PBB0, VI_ALT3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + + /* VGP4 pinmux */ + VI_PINMUX(GPIO_PBB4, VGP4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + + /* I2C2 pinmux */ + I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* UARTD pinmux */ + DEFAULT_PINMUX(GMI_A16, UARTD, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_A17, UARTD, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GMI_A18, UARTD, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GMI_A19, UARTD, NORMAL, NORMAL, OUTPUT), + + /* SPI4 pinmux */ + DEFAULT_PINMUX(GMI_AD5, SPI4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD6, SPI4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD7, SPI4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD12, RSVD1, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_CS6_N, SPI4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_WR_N, SPI4, NORMAL, NORMAL, INPUT), + + /* PWM1 pinmux */ + DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, NORMAL, OUTPUT), + + /* SOC pinmux */ + DEFAULT_PINMUX(GMI_CS1_N, SOC, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GMI_OE_N, SOC, NORMAL, TRISTATE, INPUT), + + /* EXTPERIPH2 pinmux */ + DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, OUTPUT), + /* SDMMC1 pinmux */ - DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC1_WP_N, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT), /* SDMMC3 pinmux */ - DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC3_CLK_LB_IN, SDMMC3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3, NORMAL, NORMAL, OUTPUT), - - DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT), - DEFAULT_PINMUX(SDMMC3_CD_N, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CLK_LB_IN, SDMMC3, UP, TRISTATE, INPUT), + DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3, DOWN, NORMAL, INPUT), /* SDMMC4 pinmux */ - LV_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), - LV_PINMUX(SDMMC4_RST_N, RSVD1, DOWN, NORMAL, INPUT, DISABLE, DISABLE), + DEFAULT_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT), + + /* BLINK pinmux */ + DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT), + + /* KBC pinmux */ + DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW2, KBC, UP, NORMAL, INPUT), + + /*Audio Codec*/ + DEFAULT_PINMUX(DAP3_DIN, RSVD1, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(DAP3_SCLK, RSVD1, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GPIO_PV0, RSVD1, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(KB_ROW7, RSVD1, UP, NORMAL, INPUT), + + /* UARTA pinmux */ + DEFAULT_PINMUX(KB_ROW10, UARTA, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(KB_ROW9, UARTA, NORMAL, NORMAL, OUTPUT), + + /* I2CPWR pinmux (I2C5) */ + I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + + /* SYSCLK pinmux */ + DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT), + + /* RTCK pinmux */ + DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, INPUT), + + /* CLK pinmux */ + DEFAULT_PINMUX(CLK_32K_IN, CLK, NORMAL, TRISTATE, INPUT), + + /* PWRON pinmux */ + DEFAULT_PINMUX(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT), + + /* CPU pinmux */ + DEFAULT_PINMUX(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT), + + /* PMI pinmux */ + DEFAULT_PINMUX(PWR_INT_N, PMI, NORMAL, TRISTATE, INPUT), + + /* RESET_OUT_N pinmux */ + DEFAULT_PINMUX(RESET_OUT_N, RESET_OUT_N, NORMAL, NORMAL, OUTPUT), + + /* EXTPERIPH3 pinmux */ + DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT), /* I2C1 pinmux */ - I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), - I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), + I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), - /* I2C2 pinmux */ - I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), - I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + /* UARTB pinmux */ + DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT), - /* I2C3 pinmux */ - I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), - I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + /* IRDA pinmux */ + DEFAULT_PINMUX(UART2_RXD, UARTB, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART2_TXD, UARTB, NORMAL, NORMAL, OUTPUT), + + /* UARTC pinmux */ + DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT), + + /* OWR pinmux */ + DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT), + + /* CEC pinmux */ + CEC_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT, DEFAULT, DISABLE), /* I2C4 pinmux */ - I2C_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), - I2C_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), - - /* Power I2C pinmux */ - I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), - I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), - - DEFAULT_PINMUX(ULPI_DATA0, UARTA, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(ULPI_DATA1, UARTA, UP, NORMAL, INPUT), - DEFAULT_PINMUX(ULPI_DATA2, UARTA, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(ULPI_DATA3, UARTA, NORMAL, NORMAL, INPUT), - - DEFAULT_PINMUX(ULPI_DATA4, UARTA, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(ULPI_DATA5, UARTA, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(ULPI_DATA6, UARTA, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(ULPI_DATA7, UARTA, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(ULPI_CLK, UARTD, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(ULPI_DIR, UARTD, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(ULPI_NXT, UARTD, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(ULPI_STP, UARTD, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(DAP3_FS, I2S2, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP3_DIN, I2S2, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP3_DOUT, I2S2, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP3_SCLK, I2S2, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(CLK2_REQ, DAP, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(UART2_RXD, UARTB, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(UART2_TXD, UARTB, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(GPIO_PU0, RSVD1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PU1, RSVD1, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(GPIO_PU2, RSVD1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PU3, RSVD1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PU4, PWM1, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(GPIO_PU5, PWM2, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(GPIO_PU6, RSVD1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(CLK3_REQ, DEV3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GMI_WP_N, GMI, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GMI_CS2_N, RSVD1, UP, NORMAL, INPUT), - DEFAULT_PINMUX(GMI_AD8, PWM0, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(GMI_AD10, NAND, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(GMI_A16, UARTD, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(GMI_A17, UARTD, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GMI_A18, UARTD, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GMI_A19, UARTD, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(CAM_MCLK, VI_ALT2, UP, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PBB0, RSVD1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PBB3, VGP3, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PBB5, VGP5, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PBB6, VGP6, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PBB7, I2S4, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PCC2, I2S4, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT), - - /* KBC keys */ - DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW2, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW3, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW4, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW5, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW6, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW7, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW9, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW10, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL4, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL5, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PV0, RSVD1, UP, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PV1, RSVD1, UP, NORMAL, INPUT), - - DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(CLK1_REQ, DAP, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SPDIF_IN, SPDIF, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SPDIF_OUT, SPDIF, NORMAL, NORMAL, OUTPUT), - DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT), - - DEFAULT_PINMUX(SPI1_MOSI, SPI1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SPI1_SCK, SPI1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SPI1_CS0_N, SPI1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SPI1_CS1_N, SPI1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SPI1_CS2_N, SPI1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(SPI1_MISO, SPI1, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(HDMI_INT, RSVD1, NORMAL, TRISTATE, INPUT), - - /* GPIOs */ - /* SDMMC1 CD gpio */ - DEFAULT_PINMUX(GMI_IORDY, RSVD1, UP, NORMAL, INPUT), - - /* Touch RESET */ - DEFAULT_PINMUX(GMI_AD14, NAND, NORMAL, NORMAL, OUTPUT), - - /* Power rails GPIO */ - DEFAULT_PINMUX(SPI2_SCK, GMI, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(GPIO_PBB4, VGP4, NORMAL, NORMAL, INPUT), - DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT), + DDC_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH), + DDC_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, HIGH), + + /* USB pinmux */ + USB_PINMUX(USB_VBUS_EN0, USB, NORMAL, NORMAL, INPUT, DEFAULT, ENABLE), + + /* nct */ + DEFAULT_PINMUX(GPIO_X6_AUD, SPI6, UP, TRISTATE, INPUT), }; static struct pingroup_config unused_pins_lowpower[] = { - DEFAULT_PINMUX(GMI_CS0_N, NAND, UP, TRISTATE, OUTPUT), - DEFAULT_PINMUX(GMI_CS3_N, NAND, UP, TRISTATE, OUTPUT), - DEFAULT_PINMUX(GMI_CS4_N, NAND, UP, TRISTATE, OUTPUT), - DEFAULT_PINMUX(GMI_CS7_N, NAND, UP, NORMAL, INPUT), - DEFAULT_PINMUX(GMI_AD0, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD1, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD2, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD3, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD4, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD5, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD6, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD7, NAND, NORMAL, TRISTATE, INPUT), - DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, TRISTATE, OUTPUT), - DEFAULT_PINMUX(GMI_AD11, NAND, NORMAL, TRISTATE, OUTPUT), - DEFAULT_PINMUX(GMI_AD13, NAND, UP, NORMAL, INPUT), - DEFAULT_PINMUX(GMI_WR_N, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(CLK1_REQ, RSVD3, DOWN, TRISTATE, OUTPUT), + DEFAULT_PINMUX(USB_VBUS_EN1, RSVD3, DOWN, TRISTATE, OUTPUT), }; -#endif /* _PINMUX_CONFIG_DALMORE_H_ */ +/* Initially setting all used GPIO's to non-TRISTATE */ +static struct pingroup_config tegra114_pinmux_set_nontristate[] = { + DEFAULT_PINMUX(GPIO_X4_AUD, RSVD1, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_X5_AUD, RSVD1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_X6_AUD, RSVD3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_X7_AUD, RSVD1, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_W2_AUD, RSVD1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_W3_AUD, SPI6, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_X1_AUD, RSVD3, DOWN, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_X3_AUD, RSVD3, UP, NORMAL, INPUT), + + DEFAULT_PINMUX(DAP3_FS, I2S2, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(DAP3_DIN, I2S2, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(DAP3_DOUT, I2S2, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(DAP3_SCLK, I2S2, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PV0, RSVD3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PV1, RSVD1, NORMAL, NORMAL, INPUT), + + DEFAULT_PINMUX(GPIO_PBB3, RSVD3, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PBB5, RSVD3, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PBB6, RSVD3, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PBB7, RSVD3, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PCC1, RSVD3, DOWN, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PCC2, RSVD3, DOWN, NORMAL, INPUT), + + DEFAULT_PINMUX(GMI_AD0, GMI, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_AD1, GMI, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_AD10, GMI, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_AD11, GMI, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_AD12, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD13, GMI, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_AD2, GMI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD3, GMI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD8, GMI, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_ADV_N, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_CLK, GMI, DOWN, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_CS0_N, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_CS2_N, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_CS3_N, GMI, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_CS4_N, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_CS7_N, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_DQS, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_IORDY, GMI, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_WP_N, GMI, UP, NORMAL, INPUT), + + DEFAULT_PINMUX(SDMMC1_WP_N, SPI4, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(CLK2_REQ, RSVD3, NORMAL, NORMAL, OUTPUT), + + DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(KB_COL4, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL5, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, OUTPUT), + DEFAULT_PINMUX(KB_ROW3, KBC, DOWN, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW4, KBC, DOWN, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW6, KBC, DOWN, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT), + + DEFAULT_PINMUX(CLK3_REQ, RSVD3, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PU4, RSVD3, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PU5, RSVD3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PU6, RSVD3, NORMAL, NORMAL, INPUT), + + DEFAULT_PINMUX(HDMI_INT, RSVD1, DOWN, NORMAL, INPUT), + + DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(SPDIF_IN, USB, NORMAL, NORMAL, INPUT), + + DEFAULT_PINMUX(SDMMC3_CD_N, SDMMC3, UP, NORMAL, INPUT), +}; +#endif /* PINMUX_CONFIG_COMMON_H */ diff --git a/board/nvidia/dts/tegra114-dalmore.dts b/board/nvidia/dts/tegra114-dalmore.dts index 731557798e..30cf1fb730 100644 --- a/board/nvidia/dts/tegra114-dalmore.dts +++ b/board/nvidia/dts/tegra114-dalmore.dts @@ -1,13 +1,46 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra114.dtsi" / { model = "NVIDIA Dalmore"; compatible = "nvidia,dalmore", "nvidia,tegra114"; + aliases { + i2c0 = "/i2c@7000d000"; + i2c1 = "/i2c@7000c000"; + i2c2 = "/i2c@7000c400"; + i2c3 = "/i2c@7000c500"; + i2c4 = "/i2c@7000c700"; + }; + memory { device_type = "memory"; reg = <0x80000000 0x80000000>; }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + }; }; diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts index aeda3a1ffb..7934e4a897 100644 --- a/board/nvidia/dts/tegra20-harmony.dts +++ b/board/nvidia/dts/tegra20-harmony.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Harmony evaluation board"; @@ -9,6 +9,8 @@ aliases { usb0 = "/usb@c5008000"; usb1 = "/usb@c5004000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000200"; }; memory { @@ -52,4 +54,20 @@ usb@c5004000 { nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ }; + + sdhci@c8000200 { + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <8>; + }; }; diff --git a/board/nvidia/dts/tegra20-seaboard.dts b/board/nvidia/dts/tegra20-seaboard.dts index 527a29689d..c0e2e1e5fd 100644 --- a/board/nvidia/dts/tegra20-seaboard.dts +++ b/board/nvidia/dts/tegra20-seaboard.dts @@ -1,7 +1,6 @@ /dts-v1/; -/memreserve/ 0x1c000000 0x04000000; -/include/ ARCH_CPU_DTS +#include "tegra20.dtsi" / { model = "NVIDIA Seaboard"; @@ -12,14 +11,15 @@ }; aliases { - /* This defines the order of our USB ports */ + /* This defines the order of our ports */ usb0 = "/usb@c5008000"; usb1 = "/usb@c5000000"; - i2c0 = "/i2c@7000d000"; i2c1 = "/i2c@7000c000"; i2c2 = "/i2c@7000c400"; i2c3 = "/i2c@7000c500"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000400"; }; memory { @@ -156,13 +156,16 @@ }; sdhci@c8000400 { - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ wp-gpios = <&gpio 57 0>; /* gpio PH1 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; }; sdhci@c8000600 { - support-8bit; + status = "okay"; + bus-width = <8>; }; lcd_panel: panel { diff --git a/board/nvidia/dts/tegra20-ventana.dts b/board/nvidia/dts/tegra20-ventana.dts index 3e5e39da63..e1a3d1ec91 100644 --- a/board/nvidia/dts/tegra20-ventana.dts +++ b/board/nvidia/dts/tegra20-ventana.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Ventana evaluation board"; @@ -8,6 +8,8 @@ aliases { usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000400"; }; memory { @@ -41,4 +43,17 @@ usb@c5004000 { status = "disabled"; }; + + sdhci@c8000400 { + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <8>; + }; }; diff --git a/board/nvidia/dts/tegra20-whistler.dts b/board/nvidia/dts/tegra20-whistler.dts index 4579557d6d..eb92264f9d 100644 --- a/board/nvidia/dts/tegra20-whistler.dts +++ b/board/nvidia/dts/tegra20-whistler.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Whistler evaluation board"; @@ -9,6 +9,8 @@ aliases { i2c0 = "/i2c@7000d000"; usb0 = "/usb@c5008000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000400"; }; memory { @@ -57,4 +59,15 @@ usb@c5004000 { status = "disabled"; }; + + sdhci@c8000400 { + status = "okay"; + wp-gpios = <&gpio 173 0>; /* gpio PV5 */ + bus-width = <8>; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <8>; + }; }; diff --git a/board/nvidia/dts/tegra30-cardhu.dts b/board/nvidia/dts/tegra30-cardhu.dts index f9f80c5218..4d22b48ee9 100644 --- a/board/nvidia/dts/tegra30-cardhu.dts +++ b/board/nvidia/dts/tegra30-cardhu.dts @@ -1,7 +1,6 @@ /dts-v1/; -/memreserve/ 0x1c000000 0x04000000; -/include/ ARCH_CPU_DTS +#include "tegra30.dtsi" / { model = "NVIDIA Cardhu"; @@ -13,6 +12,8 @@ i2c2 = "/i2c@7000c400"; i2c3 = "/i2c@7000c500"; i2c4 = "/i2c@7000c700"; + sdhci0 = "/sdhci@78000600"; + sdhci1 = "/sdhci@78000000"; }; memory { @@ -21,22 +22,27 @@ }; i2c@7000c000 { + status = "okay"; clock-frequency = <100000>; }; i2c@7000c400 { + status = "okay"; clock-frequency = <100000>; }; i2c@7000c500 { + status = "okay"; clock-frequency = <100000>; }; i2c@7000c700 { + status = "okay"; clock-frequency = <100000>; }; i2c@7000d000 { + status = "okay"; clock-frequency = <100000>; }; @@ -44,4 +50,17 @@ status = "okay"; spi-max-frequency = <25000000>; }; + + sdhci@78000000 { + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ + wp-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 31 0>; /* gpio PD7 */ + bus-width = <4>; + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + }; }; diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c index 93430edd3b..312244139c 100644 --- a/board/nvidia/harmony/harmony.c +++ b/board/nvidia/harmony/harmony.c @@ -27,19 +27,14 @@ #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> #include <asm/arch/tegra.h> -#include <asm/arch-tegra/mmc.h> #include <asm/gpio.h> -#ifdef CONFIG_TEGRA_MMC -#include <mmc.h> -#endif - #ifdef CONFIG_TEGRA_MMC /* * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) */ -static void pin_mux_mmc(void) +void pin_mux_mmc(void) { funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT); funcmux_select(PERIPH_ID_SDMMC2, FUNCMUX_SDMMC2_DTA_DTD_8BIT); @@ -54,25 +49,6 @@ static void pin_mux_mmc(void) /* For CD GPIO PI5 */ pinmux_tristate_disable(PINGRP_ATC); } - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) -{ - debug("board_mmc_init called\n"); - - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - debug("board_mmc_init: init SD slot J26\n"); - /* init dev 0, SD slot J26, with 8-bit bus */ - tegra_mmc_init(0, 8, GPIO_PI6, GPIO_PH2); - - debug("board_mmc_init: init SD slot J5\n"); - /* init dev 2, SD slot J5, with 4-bit bus */ - tegra_mmc_init(2, 4, GPIO_PT3, GPIO_PI5); - - return 0; -} #endif void pin_mux_usb(void) diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index 3e33da0afc..e581fddf43 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -28,11 +28,7 @@ #include <asm/arch/funcmux.h> #include <asm/arch/gpio.h> #include <asm/arch/pinmux.h> -#include <asm/arch-tegra/mmc.h> #include <asm/gpio.h> -#ifdef CONFIG_TEGRA_MMC -#include <mmc.h> -#endif /* TODO: Remove this code when the SPI switch is working */ #if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA) @@ -51,7 +47,7 @@ void gpio_early_init_uart(void) * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) */ -static void pin_mux_mmc(void) +void pin_mux_mmc(void) { funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT); funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_4BIT); @@ -61,25 +57,6 @@ static void pin_mux_mmc(void) /* For CD GPIO PI5 */ pinmux_tristate_disable(PINGRP_ATC); } - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) -{ - debug("board_mmc_init called\n"); - - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - debug("board_mmc_init: init eMMC\n"); - /* init dev 0, eMMC chip, with 8-bit bus */ - tegra_mmc_init(0, 8, -1, -1); - - debug("board_mmc_init: init SD slot\n"); - /* init dev 1, SD slot, with 4-bit bus */ - tegra_mmc_init(1, 4, GPIO_PI6, GPIO_PI5); - - return 0; -} #endif void pin_mux_usb(void) diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c index 592cd6b496..f18aa277b3 100644 --- a/board/nvidia/whistler/whistler.c +++ b/board/nvidia/whistler/whistler.c @@ -27,32 +27,19 @@ #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> -#include <asm/arch-tegra/mmc.h> #include <asm/gpio.h> #include <i2c.h> -#ifdef CONFIG_TEGRA_MMC -#include <mmc.h> -#endif - +#ifdef CONFIG_TEGRA_MMC /* * Routine: pin_mux_mmc * Description: setup the pin muxes/tristate values for the SDMMC(s) */ -static void pin_mux_mmc(void) -{ - funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT); - funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT); -} - -/* this is a weak define that we are overriding */ -int board_mmc_init(bd_t *bd) +void pin_mux_mmc(void) { uchar val; int ret; - debug("board_mmc_init called\n"); - /* Turn on MAX8907B LDO12 to 2.8V for J40 power */ ret = i2c_set_bus_num(0); if (ret) @@ -70,17 +57,10 @@ int board_mmc_init(bd_t *bd) if (ret) printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret); - /* Enable muxes, etc. for SDMMC controllers */ - pin_mux_mmc(); - - /* init dev 0 (SDMMC4), (J29 "HSMMC") with 8-bit bus */ - tegra_mmc_init(0, 8, -1, -1); - - /* init dev 1 (SDMMC3), (J40 "SDIO3") with 8-bit bus */ - tegra_mmc_init(1, 8, -1, -1); - - return 0; + funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT); + funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT); } +#endif /* this is a weak define that we are overriding */ void pin_mux_usb(void) diff --git a/board/nx823/u-boot.lds b/board/nx823/u-boot.lds index c8d38942c9..a1481c8699 100644 --- a/board/nx823/u-boot.lds +++ b/board/nx823/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/nx823/u-boot.lds.debug b/board/nx823/u-boot.lds.debug index 92796e6744..614bbb20b6 100644 --- a/board/nx823/u-boot.lds.debug +++ b/board/nx823/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c index 6a6053b385..9ed7718152 100644 --- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c +++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c @@ -23,11 +23,15 @@ */ #include <common.h> +#include <asm/gpio.h> #include <asm/io.h> #include <asm/arch/iomux-mx23.h> #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> #include <asm/arch/sys_proto.h> +#ifdef CONFIG_STATUS_LED +#include <status_led.h> +#endif DECLARE_GLOBAL_DATA_PTR; @@ -42,6 +46,11 @@ int board_early_init_f(void) /* SSP0 clock at 96MHz */ mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); +#ifdef CONFIG_CMD_USB + /* Enable LAN9512 */ + gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1); +#endif + return 0; } @@ -67,5 +76,9 @@ int board_init(void) /* Adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; +#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) + status_led_set(STATUS_LED_BOOT, STATUS_LED_STATE); +#endif + return 0; } diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c index 7def8bc3e9..a96c293c0a 100644 --- a/board/olimex/mx23_olinuxino/spl_boot.c +++ b/board/olimex/mx23_olinuxino/spl_boot.c @@ -84,6 +84,10 @@ const iomux_cfg_t iomux_setup[] = { MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI, + /* Green LED */ + MX23_PAD_SSP1_DETECT__GPIO_2_1 | + (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL), + /* MMC 0 */ MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP, MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP, @@ -91,6 +95,10 @@ const iomux_cfg_t iomux_setup[] = { MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP, MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP, MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP, + + /* Ethernet */ + MX23_PAD_GPMI_ALE__GPIO_0_17 | + (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), }; void board_init_ll(void) diff --git a/board/openrisc/openrisc-generic/u-boot.lds b/board/openrisc/openrisc-generic/u-boot.lds index 4cffacbd46..9024f30b30 100644 --- a/board/openrisc/openrisc-generic/u-boot.lds +++ b/board/openrisc/openrisc-generic/u-boot.lds @@ -29,7 +29,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } .rodata : { diff --git a/board/overo/overo.c b/board/overo/overo.c index fdf46a2aae..8690450fa8 100644 --- a/board/overo/overo.c +++ b/board/overo/overo.c @@ -392,7 +392,6 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/pandora/pandora.c b/board/pandora/pandora.c index 3a62e9d633..9ff5dd7664 100644 --- a/board/pandora/pandora.c +++ b/board/pandora/pandora.c @@ -139,7 +139,6 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/pcippc2/cpc710.h b/board/pcippc2/cpc710.h deleted file mode 100644 index 81672709bb..0000000000 --- a/board/pcippc2/cpc710.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _CPC710_H_ -#define _CPC710_H_ - -/* Revision */ -#define CPC710_TYPE_100 0x80 -#define CPC710_TYPE_100P 0x90 - -/* System control area */ -#define HW_PHYS_SCA 0xff000000 - -#define HW_SCA_CPC0 0x000000 -#define HW_SCA_SDRAM0 0x000000 -#define HW_SCA_DMA0 0x1C0000 - -#define HW_PHYS_CPC0 (HW_PHYS_SCA + HW_SCA_CPC0) -#define HW_PHYS_SDRAM0 (HW_PHYS_SCA + HW_SCA_SDRAM0) - -#define HW_CPC0_PCICNFR 0x000c -#define HW_CPC0_RSTR 0x0010 -#define HW_CPC0_SPOR 0x00e8 -#define HW_CPC0_UCTL 0x1000 -#define HW_CPC0_SIOC0 0x1020 -#define HW_CPC0_ABCNTL 0x1030 -#define HW_CPC0_SESR 0x1060 -#define HW_CPC0_SEAR 0x1070 -#define HW_CPC0_PGCHP 0x1100 -#define HW_CPC0_RGBAN0 0x1110 -#define HW_CPC0_RGBAN1 0x1120 - -#define HW_CPC0_GPDIR 0x1130 -#define HW_CPC0_GPIN 0x1140 -#define HW_CPC0_GPOUT 0x1150 - -#define HW_CPC0_ATAS 0x1160 - -#define HW_CPC0_PCIBAR 0x200018 -#define HW_CPC0_PCIENB 0x201000 - -#define HW_SDRAM0_MCCR 0x1200 -#define HW_SDRAM0_MESR 0x1220 -#define HW_SDRAM0_MEAR 0x1230 - -#define HW_SDRAM0_MCER0 0x1300 -#define HW_SDRAM0_MCER1 0x1310 -#define HW_SDRAM0_MCER2 0x1320 -#define HW_SDRAM0_MCER3 0x1330 -#define HW_SDRAM0_MCER4 0x1340 -#define HW_SDRAM0_MCER5 0x1350 -#define HW_SDRAM0_MCER6 0x1360 -#define HW_SDRAM0_MCER7 0x1370 - -#define HW_BRIDGE_PCIDG 0xf6120 -#define HW_BRIDGE_INTACK 0xf7700 -#define HW_BRIDGE_PIBAR 0xf7800 -#define HW_BRIDGE_PMBAR 0xf7810 -#define HW_BRIDGE_CRR 0xf7ef0 -#define HW_BRIDGE_PR 0xf7f20 -#define HW_BRIDGE_ACR 0xf7f30 -#define HW_BRIDGE_MSIZE 0xf7f40 -#define HW_BRIDGE_IOSIZE 0xf7f60 -#define HW_BRIDGE_SMBAR 0xf7f80 -#define HW_BRIDGE_SIBAR 0xf7fc0 -#define HW_BRIDGE_CFGADDR 0xf8000 -#define HW_BRIDGE_CFGDATA 0xf8010 -#define HW_BRIDGE_PSSIZE 0xf8100 -#define HW_BRIDGE_BARPS 0xf8120 -#define HW_BRIDGE_PSBAR 0xf8140 - -/* Configuration space registers */ -#define CPC710_BUS_NUMBER 0x40 -#define CPC710_SUB_BUS_NUMBER 0x41 - -#endif diff --git a/board/pcippc2/cpc710_init_ram.c b/board/pcippc2/cpc710_init_ram.c deleted file mode 100644 index 8945351a4d..0000000000 --- a/board/pcippc2/cpc710_init_ram.c +++ /dev/null @@ -1,232 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <asm/io.h> - -#include "pcippc2.h" -#include "i2c.h" - -typedef struct cpc710_mem_org_s { - u8 rows; - u8 cols; - u8 banks2; - u8 org; -} cpc710_mem_org_t; - -static int cpc710_compute_mcer (u32 * mcer, - unsigned long *size, unsigned int sdram); -static int cpc710_eeprom_checksum (unsigned int sdram); -static u8 cpc710_eeprom_read (unsigned int sdram, unsigned int offset); - -static u32 cpc710_mcer_mem[] = { - 0x000003f3, /* 18 lines, 4 Mb */ - 0x000003e3, /* 19 lines, 8 Mb */ - 0x000003c3, /* 20 lines, 16 Mb */ - 0x00000383, /* 21 lines, 32 Mb */ - 0x00000303, /* 22 lines, 64 Mb */ - 0x00000203, /* 23 lines, 128 Mb */ - 0x00000003, /* 24 lines, 256 Mb */ - 0x00000002, /* 25 lines, 512 Mb */ - 0x00000001 /* 26 lines, 1024 Mb */ -}; -static cpc710_mem_org_t cpc710_mem_org[] = { - {0x0c, 0x09, 0x02, 0x00}, /* 0000: 12/ 9/2 */ - {0x0d, 0x09, 0x02, 0x00}, /* 0000: 13/ 9/2 */ - {0x0d, 0x0a, 0x02, 0x00}, /* 0000: 13/10/2 */ - {0x0d, 0x0b, 0x02, 0x00}, /* 0000: 13/11/2 */ - {0x0d, 0x0c, 0x02, 0x00}, /* 0000: 13/12/2 */ - {0x0e, 0x0c, 0x02, 0x00}, /* 0000: 14/12/2 */ - {0x0b, 0x08, 0x02, 0x01}, /* 0001: 11/ 8/2 */ - {0x0b, 0x09, 0x01, 0x02}, /* 0010: 11/ 9/1 */ - {0x0b, 0x0a, 0x01, 0x03}, /* 0011: 11/10/1 */ - {0x0c, 0x08, 0x02, 0x04}, /* 0100: 12/ 8/2 */ - {0x0c, 0x0a, 0x02, 0x05}, /* 0101: 12/10/2 */ - {0x0d, 0x08, 0x01, 0x06}, /* 0110: 13/ 8/1 */ - {0x0d, 0x08, 0x02, 0x07}, /* 0111: 13/ 8/2 */ - {0x0d, 0x09, 0x01, 0x08}, /* 1000: 13/ 9/1 */ - {0x0d, 0x0a, 0x01, 0x09}, /* 1001: 13/10/1 */ - {0x0b, 0x08, 0x01, 0x0a}, /* 1010: 11/ 8/1 */ - {0x0c, 0x08, 0x01, 0x0b}, /* 1011: 12/ 8/1 */ - {0x0c, 0x09, 0x01, 0x0c}, /* 1100: 12/ 9/1 */ - {0x0e, 0x09, 0x02, 0x0d}, /* 1101: 14/ 9/2 */ - {0x0e, 0x0a, 0x02, 0x0e}, /* 1110: 14/10/2 */ - {0x0e, 0x0b, 0x02, 0x0f} /* 1111: 14/11/2 */ -}; - -unsigned long cpc710_ram_init (void) -{ - unsigned long memsize = 0; - unsigned long bank_size; - u32 mcer; - -#ifndef CONFIG_SYS_RAMBOOT - /* Clear memory banks - */ - out32 (REG (SDRAM0, MCER0), 0); - out32 (REG (SDRAM0, MCER1), 0); - out32 (REG (SDRAM0, MCER2), 0); - out32 (REG (SDRAM0, MCER3), 0); - out32 (REG (SDRAM0, MCER4), 0); - out32 (REG (SDRAM0, MCER5), 0); - out32 (REG (SDRAM0, MCER6), 0); - out32 (REG (SDRAM0, MCER7), 0); - iobarrier_rw (); - - /* Disable memory - */ - out32 (REG (SDRAM0, MCCR), 0x13b06000); - iobarrier_rw (); -#endif - - /* Only the first memory bank is initialised now - */ - if (!cpc710_compute_mcer (&mcer, &bank_size, 0)) { - puts ("Unsupported SDRAM type !\n"); - hang (); - } - memsize += bank_size; -#ifndef CONFIG_SYS_RAMBOOT - /* Enable bank, zero start - */ - out32 (REG (SDRAM0, MCER0), mcer | 0x80000000); - iobarrier_rw (); -#endif - -#ifndef CONFIG_SYS_RAMBOOT - /* Enable memory - */ - out32 (REG (SDRAM0, MCCR), in32 (REG (SDRAM0, MCCR)) | 0x80000000); - - /* Wait until initialisation finished - */ - while (!(in32 (REG (SDRAM0, MCCR)) & 0x20000000)) { - iobarrier_rw (); - } - - /* Clear Memory Error Status and Address registers - */ - out32 (REG (SDRAM0, MESR), 0); - out32 (REG (SDRAM0, MEAR), 0); - iobarrier_rw (); - - /* ECC is not configured now - */ -#endif - - /* Memory size counter - */ - out32 (REG (CPC0, RGBAN1), memsize); - - return memsize; -} - -static int cpc710_compute_mcer (u32 * mcer, unsigned long *size, unsigned int sdram) -{ - u8 rows; - u8 cols; - u8 banks2; - unsigned int lines; - u32 mc = 0; - unsigned int i; - cpc710_mem_org_t *org = 0; - - if (!i2c_reset ()) { - puts ("Can't reset I2C!\n"); - hang (); - } - - if (!cpc710_eeprom_checksum (sdram)) { - puts ("Invalid EEPROM checksum !\n"); - hang (); - } - - rows = cpc710_eeprom_read (sdram, 3); - cols = cpc710_eeprom_read (sdram, 4); - /* Can be 2 or 4 banks; divide by 2 - */ - banks2 = cpc710_eeprom_read (sdram, 17) / 2; - - lines = rows + cols + banks2; - - if (lines < 18 || lines > 26) { - /* Unsupported configuration - */ - return 0; - } - - mc |= cpc710_mcer_mem[lines - 18] << 6; - - for (i = 0; i < sizeof (cpc710_mem_org) / sizeof (cpc710_mem_org_t); - i++) { - cpc710_mem_org_t *corg = cpc710_mem_org + i; - - if (corg->rows == rows && corg->cols == cols - && corg->banks2 == banks2) { - org = corg; - - break; - } - } - - if (!org) { - /* Unsupported configuration - */ - return 0; - } - - mc |= (u32) org->org << 2; - - /* Supported configuration - */ - *mcer = mc; - *size = 1l << (lines + 4); - - return 1; -} - -static int cpc710_eeprom_checksum (unsigned int sdram) -{ - u8 sum = 0; - unsigned int i; - - for (i = 0; i < 63; i++) { - sum += cpc710_eeprom_read (sdram, i); - } - - return sum == cpc710_eeprom_read (sdram, 63); -} - -static u8 cpc710_eeprom_read (unsigned int sdram, unsigned int offset) -{ - u8 dev = (sdram << 1) | 0xa0; - u8 data; - - if (!i2c_read_byte (&data, dev, offset)) { - puts ("I2C error !\n"); - hang (); - } - - return data; -} diff --git a/board/pcippc2/cpc710_pci.c b/board/pcippc2/cpc710_pci.c deleted file mode 100644 index ccd18e1513..0000000000 --- a/board/pcippc2/cpc710_pci.c +++ /dev/null @@ -1,309 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <asm/io.h> -#include <pci.h> - -#include "hardware.h" -#include "pcippc2.h" - -struct pci_controller local_hose, cpci_hose; - -static u32 cpc710_mapped_ram; - - /* Enable PCI retry timeouts - */ -void cpc710_pci_enable_timeout (void) -{ - out32(BRIDGE(LOCAL, CFGADDR), 0x50000080); - iobarrier_rw(); - out32(BRIDGE(LOCAL, CFGDATA), 0x32000000); - iobarrier_rw(); - - out32(BRIDGE(CPCI, CFGADDR), 0x50000180); - iobarrier_rw(); - out32(BRIDGE(CPCI, CFGDATA), 0x32000000); - iobarrier_rw(); -} - -void cpc710_pci_init (void) -{ - u32 sdram_size = pcippc2_sdram_size(); - - cpc710_mapped_ram = sdram_size < PCI_MEMORY_MAXSIZE ? - sdram_size : PCI_MEMORY_MAXSIZE; - - /* Select the local PCI - */ - out32(REG(CPC0, PCICNFR), 0x80000002); - iobarrier_rw(); - - out32(REG(CPC0, PCIBAR), BRIDGE_LOCAL_PHYS); - iobarrier_rw(); - - /* Enable PCI bridge address decoding - */ - out32(REG(CPC0, PCIENB), 0x80000000); - iobarrier_rw(); - - /* Select the CPCI bridge - */ - out32(REG(CPC0, PCICNFR), 0x80000003); - iobarrier_rw(); - - out32(REG(CPC0, PCIBAR), BRIDGE_CPCI_PHYS); - iobarrier_rw(); - - /* Enable PCI bridge address decoding - */ - out32(REG(CPC0, PCIENB), 0x80000000); - iobarrier_rw(); - - /* Disable configuration accesses - */ - out32(REG(CPC0, PCICNFR), 0x80000000); - iobarrier_rw(); - - /* Initialise the local PCI - */ - out32(BRIDGE(LOCAL, CRR), 0x7c000000); - iobarrier_rw(); - out32(BRIDGE(LOCAL, PCIDG), 0x40000000); - iobarrier_rw(); - out32(BRIDGE(LOCAL, PIBAR), BRIDGE_LOCAL_IO_BUS); - out32(BRIDGE(LOCAL, SIBAR), BRIDGE_LOCAL_IO_PHYS); - out32(BRIDGE(LOCAL, IOSIZE), -BRIDGE_LOCAL_IO_SIZE); - iobarrier_rw(); - out32(BRIDGE(LOCAL, PMBAR), BRIDGE_LOCAL_MEM_BUS); - out32(BRIDGE(LOCAL, SMBAR), BRIDGE_LOCAL_MEM_PHYS); - out32(BRIDGE(LOCAL, MSIZE), -BRIDGE_LOCAL_MEM_SIZE); - iobarrier_rw(); - out32(BRIDGE(LOCAL, PR), 0x00ffe000); - iobarrier_rw(); - out32(BRIDGE(LOCAL, ACR), 0xfe000000); - iobarrier_rw(); - out32(BRIDGE(LOCAL, PSBAR), PCI_MEMORY_BUS >> 24); - out32(BRIDGE(LOCAL, BARPS), PCI_MEMORY_PHYS >> 24); - out32(BRIDGE(LOCAL, PSSIZE), 256 - (cpc710_mapped_ram >> 24)); - iobarrier_rw(); - - /* Initialise the CPCI bridge - */ - out32(BRIDGE(CPCI, CRR), 0x7c000000); - iobarrier_rw(); - out32(BRIDGE(CPCI, PCIDG), 0xC0000000); - iobarrier_rw(); - out32(BRIDGE(CPCI, PIBAR), BRIDGE_CPCI_IO_BUS); - out32(BRIDGE(CPCI, SIBAR), BRIDGE_CPCI_IO_PHYS); - out32(BRIDGE(CPCI, IOSIZE), -BRIDGE_CPCI_IO_SIZE); - iobarrier_rw(); - out32(BRIDGE(CPCI, PMBAR), BRIDGE_CPCI_MEM_BUS); - out32(BRIDGE(CPCI, SMBAR), BRIDGE_CPCI_MEM_PHYS); - out32(BRIDGE(CPCI, MSIZE), -BRIDGE_CPCI_MEM_SIZE); - iobarrier_rw(); - out32(BRIDGE(CPCI, PR), 0x80ffe000); - iobarrier_rw(); - out32(BRIDGE(CPCI, ACR), 0xdf000000); - iobarrier_rw(); - out32(BRIDGE(CPCI, PSBAR), PCI_MEMORY_BUS >> 24); - out32(BRIDGE(CPCI, BARPS), PCI_MEMORY_PHYS >> 24); - out32(BRIDGE(CPCI, PSSIZE), 256 - (cpc710_mapped_ram >> 24)); - iobarrier_rw(); - - /* Local PCI - */ - - out32(BRIDGE(LOCAL, CFGADDR), 0x04000080); - iobarrier_rw(); - out32(BRIDGE(LOCAL, CFGDATA), 0x56010000); - iobarrier_rw(); - - out32(BRIDGE(LOCAL, CFGADDR), 0x0c000080); - iobarrier_rw(); - out32(BRIDGE(LOCAL, CFGDATA), PCI_LATENCY_TIMER_VAL << 16); - iobarrier_rw(); - - /* Set bus and subbus numbers - */ - out32(BRIDGE(LOCAL, CFGADDR), 0x40000080); - iobarrier_rw(); - out32(BRIDGE(LOCAL, CFGDATA), 0x00000000); - iobarrier_rw(); - - out32(BRIDGE(LOCAL, CFGADDR), 0x50000080); - iobarrier_rw(); - /* PCI retry timeouts will be enabled later - */ - out32(BRIDGE(LOCAL, CFGDATA), 0x00000000); - iobarrier_rw(); - - /* CPCI - */ - - /* Set bus and subbus numbers - */ - out32(BRIDGE(CPCI, CFGADDR), 0x40000080); - iobarrier_rw(); - out32(BRIDGE(CPCI, CFGDATA), 0x01010000); - iobarrier_rw(); - - out32(BRIDGE(CPCI, CFGADDR), 0x04000180); - iobarrier_rw(); - out32(BRIDGE(CPCI, CFGDATA), 0x56010000); - iobarrier_rw(); - - out32(BRIDGE(CPCI, CFGADDR), 0x0c000180); - iobarrier_rw(); - out32(BRIDGE(CPCI, CFGDATA), PCI_LATENCY_TIMER_VAL << 16); - iobarrier_rw(); - - /* Write to the PSBAR */ - out32(BRIDGE(CPCI, CFGADDR), 0x10000180); - iobarrier_rw(); - out32(BRIDGE(CPCI, CFGDATA), cpu_to_le32(PCI_MEMORY_BUS)); - iobarrier_rw(); - - /* Set bus and subbus numbers - */ - out32(BRIDGE(CPCI, CFGADDR), 0x40000180); - iobarrier_rw(); - out32(BRIDGE(CPCI, CFGDATA), 0x01ff0000); - iobarrier_rw(); - - out32(BRIDGE(CPCI, CFGADDR), 0x50000180); - iobarrier_rw(); - out32(BRIDGE(CPCI, CFGDATA), 0x32000000); - /* PCI retry timeouts will be enabled later - */ - out32(BRIDGE(CPCI, CFGDATA), 0x00000000); - iobarrier_rw(); - - /* Remove reset on the PCI buses - */ - out32(BRIDGE(LOCAL, CRR), 0xfc000000); - iobarrier_rw(); - out32(BRIDGE(CPCI, CRR), 0xfc000000); - iobarrier_rw(); - - local_hose.first_busno = 0; - local_hose.last_busno = 0xff; - - /* System memory space */ - pci_set_region(local_hose.regions + 0, - PCI_MEMORY_BUS, - PCI_MEMORY_PHYS, - PCI_MEMORY_MAXSIZE, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - /* PCI memory space */ - pci_set_region(local_hose.regions + 1, - BRIDGE_LOCAL_MEM_BUS, - BRIDGE_LOCAL_MEM_PHYS, - BRIDGE_LOCAL_MEM_SIZE, - PCI_REGION_MEM); - - /* PCI I/O space */ - pci_set_region(local_hose.regions + 2, - BRIDGE_LOCAL_IO_BUS, - BRIDGE_LOCAL_IO_PHYS, - BRIDGE_LOCAL_IO_SIZE, - PCI_REGION_IO); - - local_hose.region_count = 3; - - pci_setup_indirect(&local_hose, - BRIDGE_LOCAL_PHYS + HW_BRIDGE_CFGADDR, - BRIDGE_LOCAL_PHYS + HW_BRIDGE_CFGDATA); - - pci_register_hose(&local_hose); - - /* Initialize PCI32 bus registers */ - pci_hose_write_config_byte(&local_hose, - PCI_BDF(local_hose.first_busno,0,0), - CPC710_BUS_NUMBER, - local_hose.first_busno); - pci_hose_write_config_byte(&local_hose, - PCI_BDF(local_hose.first_busno,0,0), - CPC710_SUB_BUS_NUMBER, - local_hose.last_busno); - - local_hose.last_busno = pci_hose_scan(&local_hose); - - /* Write out correct max subordinate bus number for local hose */ - pci_hose_write_config_byte(&local_hose, - PCI_BDF(local_hose.first_busno,0,0), - CPC710_SUB_BUS_NUMBER, - local_hose.last_busno); - - cpci_hose.first_busno = local_hose.last_busno + 1; - cpci_hose.last_busno = 0xff; - - /* System memory space */ - pci_set_region(cpci_hose.regions + 0, - PCI_MEMORY_BUS, - PCI_MEMORY_PHYS, - PCI_MEMORY_MAXSIZE, - PCI_REGION_SYS_MEMORY); - - /* PCI memory space */ - pci_set_region(cpci_hose.regions + 1, - BRIDGE_CPCI_MEM_BUS, - BRIDGE_CPCI_MEM_PHYS, - BRIDGE_CPCI_MEM_SIZE, - PCI_REGION_MEM); - - /* PCI I/O space */ - pci_set_region(cpci_hose.regions + 2, - BRIDGE_CPCI_IO_BUS, - BRIDGE_CPCI_IO_PHYS, - BRIDGE_CPCI_IO_SIZE, - PCI_REGION_IO); - - cpci_hose.region_count = 3; - - pci_setup_indirect(&cpci_hose, - BRIDGE_CPCI_PHYS + HW_BRIDGE_CFGADDR, - BRIDGE_CPCI_PHYS + HW_BRIDGE_CFGDATA); - - pci_register_hose(&cpci_hose); - - /* Initialize PCI64 bus registers */ - pci_hose_write_config_byte(&cpci_hose, - PCI_BDF(cpci_hose.first_busno,0,0), - CPC710_BUS_NUMBER, - cpci_hose.first_busno); - pci_hose_write_config_byte(&cpci_hose, - PCI_BDF(cpci_hose.first_busno,0,0), - CPC710_SUB_BUS_NUMBER, - cpci_hose.last_busno); - - cpci_hose.last_busno = pci_hose_scan(&cpci_hose); - - /* Write out correct max subordinate bus number for cpci hose */ - pci_hose_write_config_byte(&cpci_hose, - PCI_BDF(cpci_hose.first_busno,0,0), - CPC710_SUB_BUS_NUMBER, - cpci_hose.last_busno); -} diff --git a/board/pcippc2/cpc710_pci.h b/board/pcippc2/cpc710_pci.h deleted file mode 100644 index 24d0db6345..0000000000 --- a/board/pcippc2/cpc710_pci.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _CPC710_PCI_H_ -#define _CPC710_PCI_H_ - -#define PCI_MEMORY_PHYS 0x00000000 -#define PCI_MEMORY_BUS 0x80000000 -#define PCI_MEMORY_MAXSIZE 0x20000000 - -#define BRIDGE_CPCI_PHYS 0xff500000 -#define BRIDGE_CPCI_MEM_SIZE 0x08000000 -#define BRIDGE_CPCI_MEM_PHYS 0xf0000000 -#define BRIDGE_CPCI_MEM_BUS 0x00000000 -#define BRIDGE_CPCI_IO_SIZE 0x02000000 -#define BRIDGE_CPCI_IO_PHYS 0xfc000000 -#define BRIDGE_CPCI_IO_BUS 0x00000000 - -#define BRIDGE_LOCAL_PHYS 0xff400000 -#define BRIDGE_LOCAL_MEM_SIZE 0x04000000 -#define BRIDGE_LOCAL_MEM_PHYS 0xf8000000 -#define BRIDGE_LOCAL_MEM_BUS 0x40000000 -#define BRIDGE_LOCAL_IO_SIZE 0x01000000 -#define BRIDGE_LOCAL_IO_PHYS 0xfe000000 -#define BRIDGE_LOCAL_IO_BUS 0x04000000 - -#define BRIDGE(r, x) (BRIDGE_##r##_PHYS + HW_BRIDGE_##x) - -#define PCI_LATENCY_TIMER_VAL 0xff - -#endif diff --git a/board/pcippc2/flash.c b/board/pcippc2/flash.c deleted file mode 100644 index ec604e0d60..0000000000 --- a/board/pcippc2/flash.c +++ /dev/null @@ -1,573 +0,0 @@ -/* - * (C) Copyright 2001 - * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. - * - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <flash.h> -#include <asm/io.h> - -/*---------------------------------------------------------------------*/ -#undef DEBUG_FLASH - -#ifdef DEBUG_FLASH -#define DEBUGF(fmt,args...) printf(fmt ,##args) -#else -#define DEBUGF(fmt,args...) -#endif -/*---------------------------------------------------------------------*/ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -static ulong flash_get_size (ulong addr, flash_info_t *info); -static int flash_get_offsets (ulong base, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_reset (ulong addr); - -unsigned long flash_init (void) -{ - unsigned int i; - unsigned long flash_size = 0; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = 0; - flash_info[i].size = 0; - } - - DEBUGF("\n## Get flash size @ 0x%08x\n", CONFIG_SYS_FLASH_BASE); - - flash_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info); - - DEBUGF("## Flash bank size: %08lx\n", flash_size); - - if (flash_size) { -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \ - CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_MAX_SIZE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); -#endif - - } else { - puts ("Warning: the BOOT Flash is not initialised !"); - } - - return flash_size; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (ulong addr, flash_info_t *info) -{ - short i; - uchar value; - - /* Write auto select command: read Manufacturer ID */ - out8(addr + 0x0555, 0xAA); - iobarrier_rw(); - out8(addr + 0x02AA, 0x55); - iobarrier_rw(); - out8(addr + 0x0555, 0x90); - iobarrier_rw(); - - value = in8(addr); - iobarrier_rw(); - - DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, value); - - switch (value | (value << 16)) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - - case STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - flash_reset (addr); - return 0; - } - - value = in8(addr + 1); /* device ID */ - iobarrier_rw(); - - DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", addr+1, value); - - switch ((ulong)value) { - case AMD_ID_F040B: - DEBUGF("Am29F040B\n"); - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 512 kB */ - - case AMD_ID_LV040B: - DEBUGF("Am29LV040B\n"); - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 512 kB */ - - case AMD_ID_LV400T: - DEBUGF("Am29LV400T\n"); - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - DEBUGF("Am29LV400B\n"); - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - DEBUGF("Am29LV800T\n"); - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - DEBUGF("Am29LV400B\n"); - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV160T: - DEBUGF("Am29LV160T\n"); - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - DEBUGF("Am29LV160B\n"); - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV320T: - DEBUGF("Am29LV320T\n"); - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - -#if 0 - /* Has the same ID as AMD_ID_LV320T, to be fixed */ - case AMD_ID_LV320B: - DEBUGF("Am29LV320B\n"); - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - - case AMD_ID_LV033C: - DEBUGF("Am29LV033C\n"); - info->flash_id += FLASH_AM033C; - info->sector_count = 64; - info->size = 0x01000000; - break; /* => 16Mb */ - - case STM_ID_F040B: - DEBUGF("M29F040B\n"); - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 512 kB */ - - default: - info->flash_id = FLASH_UNKNOWN; - flash_reset (addr); - return (0); /* => no or unknown flash */ - - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - if (! flash_get_offsets (addr, info)) { - flash_reset (addr); - return 0; - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - value = in8(info->start[i] + 2); - iobarrier_rw(); - info->protect[i] = (value & 1) != 0; - } - - /* - * Reset bank to read mode - */ - flash_reset (addr); - - return (info->size); -} - -static int flash_get_offsets (ulong base, flash_info_t *info) -{ - unsigned int i; - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - /* set sector offsets for uniform sector type */ - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + i * info->size / - info->sector_count; - } - break; - default: - return 0; - } - - return 1; -} - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - volatile ulong addr = info->start[0]; - int flag, prot, sect, l_sect; - ulong start, now, last; - - if (s_first < 0 || s_first > s_last) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - out8(addr + 0x555, 0xAA); - iobarrier_rw(); - out8(addr + 0x2AA, 0x55); - iobarrier_rw(); - out8(addr + 0x555, 0x80); - iobarrier_rw(); - out8(addr + 0x555, 0xAA); - iobarrier_rw(); - out8(addr + 0x2AA, 0x55); - iobarrier_rw(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = info->start[sect]; - out8(addr, 0x30); - iobarrier_rw(); - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = info->start[l_sect]; - - DEBUGF ("Start erase timeout: %d\n", CONFIG_SYS_FLASH_ERASE_TOUT); - - while ((in8(addr) & 0x80) != 0x80) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - flash_reset (info->start[0]); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - iobarrier_rw(); - } - -DONE: - /* reset to read mode */ - flash_reset (info->start[0]); - - printf (" done\n"); - return 0; -} - -/* - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/* - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - volatile ulong addr = info->start[0]; - ulong start; - int i; - - /* Check if Flash is (sufficiently) erased */ - if ((in32(dest) & data) != data) { - return (2); - } - - /* write each byte out */ - for (i = 0; i < 4; i++) { - char *data_ch = (char *)&data; - int flag = disable_interrupts(); - - out8(addr + 0x555, 0xAA); - iobarrier_rw(); - out8(addr + 0x2AA, 0x55); - iobarrier_rw(); - out8(addr + 0x555, 0xA0); - iobarrier_rw(); - out8(dest+i, data_ch[i]); - iobarrier_rw(); - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - flash_reset (addr); - return (1); - } - iobarrier_rw(); - } - } - - flash_reset (addr); - return (0); -} - -/* - * Reset bank to read mode - */ -static void flash_reset (ulong addr) -{ - out8(addr, 0xF0); /* reset bank */ - iobarrier_rw(); -} - -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; - case FLASH_MAN_STM: printf ("SGS THOMSON "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n"); - break; - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - if (info->size % 0x100000 == 0) { - printf (" Size: %ld MB in %d Sectors\n", - info->size / 0x100000, info->sector_count); - } else if (info->size % 0x400 == 0) { - printf (" Size: %ld KB in %d Sectors\n", - info->size / 0x400, info->sector_count); - } else { - printf (" Size: %ld B in %d Sectors\n", - info->size, info->sector_count); - } - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} diff --git a/board/pcippc2/fpga_serial.c b/board/pcippc2/fpga_serial.c deleted file mode 100644 index de61ca0e56..0000000000 --- a/board/pcippc2/fpga_serial.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <asm/io.h> - -#include "fpga_serial.h" -#include "hardware.h" -#include "pcippc2.h" - -DECLARE_GLOBAL_DATA_PTR; - - /* 8 data, 1 stop, no parity - */ -#define LCRVAL 0x03 - /* RTS/DTR - */ -#define MCRVAL 0x03 - /* Clear & enable FIFOs - */ -#define FCRVAL 0x07 - -static void fpga_serial_wait (void); -static void fpga_serial_print (char c); - -void fpga_serial_init (int baudrate) -{ - int clock_divisor = 115200 / baudrate; - - out8 (FPGA (INT, SERIAL_CONFIG), 0x24); - iobarrier_rw (); - - fpga_serial_wait (); - - out8 (UART (IER), 0); - out8 (UART (LCR), LCRVAL | 0x80); - iobarrier_rw (); - out8 (UART (DLL), clock_divisor & 0xff); - out8 (UART (DLM), clock_divisor >> 8); - iobarrier_rw (); - out8 (UART (LCR), LCRVAL); - iobarrier_rw (); - out8 (UART (MCR), MCRVAL); - out8 (UART (FCR), FCRVAL); - iobarrier_rw (); -} - -void fpga_serial_putc (char c) -{ - if (c) { - fpga_serial_print (c); - } -} - -int fpga_serial_getc (void) -{ - while ((in8 (UART (LSR)) & 0x01) == 0); - - return in8 (UART (RBR)); -} - -int fpga_serial_tstc (void) -{ - return (in8 (UART (LSR)) & 0x01) != 0; -} - -void fpga_serial_setbrg (void) -{ - int clock_divisor = 115200 / gd->baudrate; - - fpga_serial_wait (); - - out8 (UART (LCR), LCRVAL | 0x80); - iobarrier_rw (); - out8 (UART (DLL), clock_divisor & 0xff); - out8 (UART (DLM), clock_divisor >> 8); - iobarrier_rw (); - out8 (UART (LCR), LCRVAL); - iobarrier_rw (); -} - -static void fpga_serial_wait (void) -{ - while ((in8 (UART (LSR)) & 0x40) == 0); -} - -static void fpga_serial_print (char c) -{ - if (c == '\n') { - while ((in8 (UART (LSR)) & 0x20) == 0); - - out8 (UART (THR), '\r'); - iobarrier_rw (); - } - - while ((in8 (UART (LSR)) & 0x20) == 0); - - out8 (UART (THR), c); - iobarrier_rw (); - - if (c == '\n') { - fpga_serial_wait (); - } -} diff --git a/board/pcippc2/hardware.h b/board/pcippc2/hardware.h deleted file mode 100644 index 489929dd0c..0000000000 --- a/board/pcippc2/hardware.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _HARDWARE_H_ -#define _HARDWARE_H_ - -#include "cpc710.h" -#include "cpc710_pci.h" -#include "pcippc2_fpga.h" -#include "ns16550.h" - -#define REG(r, x) (HW_PHYS_##r + HW_##r##_##x) - - /* Address map: - * - * 0x00000000-0x20000000 SDRAM - * 0x40000000-0x00008000 Init RAM in the CPU DCache - * 0xf0000000-0xf8000000 CPCI MEM - * 0xf8000000-0xfc000000 Local PCI MEM - * 0xfc000000-0xfe000000 CPCI I/O - * 0xfe000000-0xff000000 Local PCI I/O - * 0xff000000-0xff201000 System configuration space - * 0xff400000-0xff500000 Local PCI bridge space - * 0xff500000-0xff600000 CPCI bridge space - * 0xfff00000-0xfff80000 Boot Flash - */ - -#endif diff --git a/board/pcippc2/i2c.c b/board/pcippc2/i2c.c deleted file mode 100644 index ab52562e6a..0000000000 --- a/board/pcippc2/i2c.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <asm/io.h> - -#include "hardware.h" -#include "i2c.h" - -static void i2c_start (void); -static void i2c_stop (void); -static int i2c_write (u8 data); -static void i2c_read (u8 * data); - -static inline void i2c_port_start (void); -static inline void i2c_clock (unsigned int val); -static inline void i2c_data (unsigned int val); -static inline unsigned int - i2c_in (void); -static inline void i2c_write_bit (unsigned int val); -static inline unsigned int - i2c_read_bit (void); - -static inline void i2c_udelay (unsigned int time); - -int i2c_read_byte ( - u8 * data, - u8 dev, - u8 offset) -{ - int err = 0; - - i2c_start(); - - err = ! i2c_write(dev); - - if (! err) - { - err = ! i2c_write(offset); - } - - if (! err) - { - i2c_start(); - } - - if (! err) - { - err = ! i2c_write(dev | 0x01); - } - - if (! err) - { - i2c_read(data); - } - - i2c_stop(); - - return ! err; -} - -static inline void i2c_udelay ( - unsigned int time) -{ - int v; - - asm volatile("mtdec %0" : : "r" (time * ((CONFIG_SYS_BUS_CLK / 4) / 1000000))); - - do - { - asm volatile("isync; mfdec %0" : "=r" (v)); - } while (v >= 0); -} - - /* Low-level hardware access - */ - -#define BIT_GPDATA 0x80000000 -#define BIT_GPCLK 0x40000000 - -static inline void i2c_port_start (void) -{ - out32(REG(CPC0, GPDIR), in32(REG(CPC0, GPDIR)) & ~(BIT_GPCLK | BIT_GPDATA)); - out32(REG(CPC0, GPOUT), in32(REG(CPC0, GPOUT)) & ~(BIT_GPCLK | BIT_GPDATA)); - iobarrier_rw(); - - i2c_udelay(1); -} - -static inline void i2c_clock ( - unsigned int val) -{ - if (val) - { - out32(REG(CPC0, GPDIR), in32(REG(CPC0, GPDIR)) & ~BIT_GPCLK); - } - else - { - out32(REG(CPC0, GPDIR), in32(REG(CPC0, GPDIR)) | BIT_GPCLK); - } - - iobarrier_rw(); - - i2c_udelay(1); -} - -static inline void i2c_data ( - unsigned int val) -{ - if (val) - { - out32(REG(CPC0, GPDIR), in32(REG(CPC0, GPDIR)) & ~BIT_GPDATA); - } - else - { - out32(REG(CPC0, GPDIR), in32(REG(CPC0, GPDIR)) | BIT_GPDATA); - } - - iobarrier_rw(); - - i2c_udelay(1); -} - -static inline unsigned int i2c_in (void) -{ - unsigned int val = ((in32(REG(CPC0, GPIN)) & BIT_GPDATA) != 0)?1:0; - - iobarrier_rw(); - - return val; -} - - - /* Protocol implementation - */ - -static inline void i2c_write_bit ( - unsigned int val) -{ - i2c_data(val); - i2c_udelay(10); - i2c_clock(1); - i2c_udelay(10); - i2c_clock(0); - i2c_udelay(10); -} - -static inline unsigned int i2c_read_bit (void) -{ - unsigned int val; - - i2c_data(1); - i2c_udelay(10); - - i2c_clock(1); - i2c_udelay(10); - - val = i2c_in(); - - i2c_clock(0); - i2c_udelay(10); - - return val; -} - -unsigned int i2c_reset (void) -{ - unsigned int val; - int i; - - i2c_port_start(); - - i=0; - do { - i2c_udelay(10); - i2c_clock(0); - i2c_udelay(10); - i2c_clock(1); - i2c_udelay(10); - val = i2c_in(); - i++; - } while ((i<9)&&(val==0)); - return (val); -} - - -static void i2c_start (void) -{ - i2c_data(1); - i2c_clock(1); - i2c_udelay(10); - i2c_data(0); - i2c_udelay(10); - i2c_clock(0); - i2c_udelay(10); -} - -static void i2c_stop (void) -{ - i2c_data(0); - i2c_udelay(10); - i2c_clock(1); - i2c_udelay(10); - i2c_data(1); - i2c_udelay(10); -} - -static int i2c_write ( - u8 data) -{ - unsigned int i; - - for (i = 0; i < 8; i++) - { - i2c_write_bit(data >> 7); - data <<= 1; - } - - return i2c_read_bit() == 0; -} - -static void i2c_read ( - u8 * data) -{ - unsigned int i; - u8 val = 0; - - for (i = 0; i < 8; i++) - { - val <<= 1; - val |= i2c_read_bit(); - } - - *data = val; - i2c_write_bit(1); /* NoAck */ -} diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c deleted file mode 100644 index 5e6fc58cf7..0000000000 --- a/board/pcippc2/pcippc2.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <command.h> -#include <asm/io.h> -#include <linux/mtd/doc2000.h> -#include <watchdog.h> -#include <pci.h> -#include <netdev.h> -#include <serial.h> - -#include "hardware.h" -#include "pcippc2.h" -#include "sconsole.h" -#include "fpga_serial.h" - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_WATCHDOG) - -static int pcippc2_wdt_init_done = 0; - -void pcippc2_wdt_init (void); - -#endif - - /* Check board identity - */ -int checkboard (void) -{ -#ifdef CONFIG_PCIPPC2 - puts ("Board: Gespac PCIPPC-2\n"); -#else - puts ("Board: Gespac PCIPPC-6\n"); -#endif - return 0; -} - - /* RAM size is stored in CPC0_RGBAN1 - */ -u32 pcippc2_sdram_size (void) -{ - return in32 (REG (CPC0, RGBAN1)); -} - -phys_size_t initdram (int board_type) -{ - return cpc710_ram_init (); -} - -int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - out32 (REG (CPC0, SPOR), 0); - iobarrier_rw (); - while (1); - /* notreached */ - return (-1); -} - -int board_early_init_f (void) -{ - out32 (REG (CPC0, RSTR), 0xC0000000); - iobarrier_rw (); - - out32 (REG (CPC0, RSTR), 0xF0000000); - iobarrier_rw (); - - out32 (REG (CPC0, UCTL), 0x00F80000); - - out32 (REG (CPC0, SIOC0), 0x30000000); - - out32 (REG (CPC0, ABCNTL), 0x00000000); - - out32 (REG (CPC0, SESR), 0x00000000); - out32 (REG (CPC0, SEAR), 0x00000000); - - /* Detect IBM Avignon CPC710 Revision */ - if ((in32 (REG (CPC0, UCTL)) & 0x000000F0) == CPC710_TYPE_100P) - out32 (REG (CPC0, PGCHP), 0xA0000040); - else - out32 (REG (CPC0, PGCHP), 0x80800040); - - - out32 (REG (CPC0, ATAS), 0x709C2508); - - iobarrier_rw (); - - return 0; -} - -void after_reloc (ulong dest_addr) -{ - /* Jump to the main U-Boot board init code - */ - board_init_r ((gd_t *)gd, dest_addr); -} - -int misc_init_r (void) -{ - pcippc2_fpga_init (); - - pcippc2_cpci3264_init (); - -#if defined(CONFIG_WATCHDOG) - pcippc2_wdt_init (); -#endif - - fpga_serial_init (sconsole_get_baudrate ()); - - sconsole_putc = fpga_serial_putc; - sconsole_puts = default_serial_puts; - sconsole_getc = fpga_serial_getc; - sconsole_tstc = fpga_serial_tstc; - sconsole_setbrg = fpga_serial_setbrg; - - sconsole_flush (); - return (0); -} - -void pci_init_board (void) -{ - cpc710_pci_init (); - - /* FPGA requires no retry timeouts to be enabled - */ - cpc710_pci_enable_timeout (); -} - -#ifdef CONFIG_CMD_DOC -void doc_init (void) -{ - doc_probe (pcippc2_fpga1_phys + HW_FPGA1_DOC); -} -#endif - -void pcippc2_cpci3264_init (void) -{ - pci_dev_t bdf = pci_find_device(FPGA_VENDOR_ID, FPGA_DEVICE_ID, 0); - - if (bdf == -1) - { - puts("Unable to find FPGA !\n"); - hang(); - } - - if((in32(pcippc2_fpga0_phys + HW_FPGA0_BOARD) & 0x01000000) == 0x01000000) - /* 32-bits Compact PCI bus - LSB bit */ - { - iobarrier_rw(); - out32(BRIDGE(CPCI, PCIDG), 0x40000000); /* 32-bits bridge, Pipeline */ - iobarrier_rw(); - } -} - -#if defined(CONFIG_WATCHDOG) - -void pcippc2_wdt_init (void) -{ - out16r (FPGA (WDT, PROG), 0xffff); - out8 (FPGA (WDT, CTRL), 0x1); - - pcippc2_wdt_init_done = 1; -} - -void pcippc2_wdt_done (void) -{ - out8 (FPGA (WDT, CTRL), 0x0); - - pcippc2_wdt_init_done = 0; -} - -void pcippc2_wdt_reset (void) -{ - if (pcippc2_wdt_init_done == 1) - out8 (FPGA (WDT, REFRESH), 0x56); -} - -void watchdog_reset (void) -{ - int re_enable = disable_interrupts (); - - pcippc2_wdt_reset (); - if (re_enable) - enable_interrupts (); -} - -#if defined(CONFIG_CMD_BSP) -int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - switch (argc) { - case 1: - printf ("Watchdog timer status is %s\n", - pcippc2_wdt_init_done == 1 ? "on" : "off"); - - return 0; - case 2: - if (!strcmp(argv[1],"on")) { - pcippc2_wdt_init(); - printf("Watchdog timer now is on\n"); - - return 0; - - } else if (!strcmp(argv[1],"off")) { - pcippc2_wdt_done(); - printf("Watchdog timer now is off\n"); - - return 0; - - } else - break; - default: - break; - } - return cmd_usage(cmdtp); -} - -U_BOOT_CMD( - wd, 2, 1, do_wd, - "check and set watchdog", - "on - switch watchDog on\n" - "wd off - switch watchdog off\n" - "wd - print current status" -); - -#endif -#endif /* CONFIG_WATCHDOG */ - -int board_eth_init(bd_t *bis) -{ - return pci_eth_init(bis); -} diff --git a/board/pcippc2/pcippc2.h b/board/pcippc2/pcippc2.h deleted file mode 100644 index a1366ef69c..0000000000 --- a/board/pcippc2/pcippc2.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _PCIPPC2_H_ -#define _PCIPPC2_H_ - -#include <config.h> -#include <common.h> - -#include "hardware.h" - -#define FPGA(r, p) (pcippc2_fpga0_phys + HW_FPGA0_##r##_##p) -#define UART(r) (pcippc2_fpga0_phys + HW_FPGA0_UART1 + NS16550_##r * 4) -#define RTC(r) (pcippc2_fpga1_phys + HW_FPGA1_RTC + r) - -extern u32 pcippc2_fpga0_phys; -extern u32 pcippc2_fpga1_phys; - -extern u32 pcippc2_sdram_size (void); - -extern void pcippc2_fpga_init (void); - -extern void pcippc2_cpci3264_init (void); - -extern void cpc710_pci_init (void); -extern void cpc710_pci_enable_timeout (void); - -extern unsigned long - cpc710_ram_init (void); - -#endif diff --git a/board/pcippc2/pcippc2_fpga.c b/board/pcippc2/pcippc2_fpga.c deleted file mode 100644 index 7f6739ddab..0000000000 --- a/board/pcippc2/pcippc2_fpga.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <asm/io.h> - -#include "pci.h" - -#include "hardware.h" -#include "pcippc2.h" - -u32 pcippc2_fpga0_phys; -u32 pcippc2_fpga1_phys; - -void pcippc2_fpga_init (void) -{ - pci_dev_t bdf = pci_find_device(FPGA_VENDOR_ID, FPGA_DEVICE_ID, 0); - unsigned int addr; - u16 cmd; - - if (bdf == -1) - { - puts("Unable to find FPGA !\n"); - hang(); - } - - pci_read_config_word(bdf, PCI_COMMAND, &cmd); - if ((cmd & (PCI_COMMAND_MEMORY | PCI_COMMAND_IO)) != (PCI_COMMAND_MEMORY | PCI_COMMAND_IO)) - { - puts("FPGA is not configured !\n"); - hang(); - } - - pci_read_config_dword(bdf, PCI_BASE_ADDRESS_0, &addr); - if (addr & 0x1) - { - /* IO space - */ - pcippc2_fpga0_phys = pci_io_to_phys(bdf, addr & 0xfffffffc); - } - else - { - /* Memory space - */ - pcippc2_fpga0_phys = pci_mem_to_phys(bdf, addr & 0xfffffff0); - } - - pci_read_config_dword(bdf, PCI_BASE_ADDRESS_1, &addr); - if (addr & 0x1) - { - /* IO space - */ - pcippc2_fpga1_phys = pci_io_to_phys(bdf, addr & 0xfffffffc); - } - else - { - /* Memory space - */ - pcippc2_fpga1_phys = pci_mem_to_phys(bdf, addr & 0xfffffff0); - } - - /* Interrupts are not used - */ - out32(FPGA(INT, INTR_MASK), 0xffffffff); - iobarrier_rw(); -} diff --git a/board/pcippc2/pcippc2_fpga.h b/board/pcippc2/pcippc2_fpga.h deleted file mode 100644 index 850c331973..0000000000 --- a/board/pcippc2/pcippc2_fpga.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _PCIPPC2_FPGA_H_ -#define _PCIPPC2_FPGA_H_ - -#define FPGA_VENDOR_ID 0x1310 -#define FPGA_DEVICE_ID 0x000d - -#define HW_FPGA0_INT 0x0000 -#define HW_FPGA0_BOARD 0x0060 -#define HW_FPGA0_UART1 0x0080 -#define HW_FPGA0_UART2 0x0100 -#define HW_FPGA0_RTC 0x2000 -#define HW_FPGA0_DOC 0x4000 -#define HW_FPGA1_RTC 0x0000 -#define HW_FPGA1_DOC 0x4000 - -#define HW_FPGA0_INT_INTR_MASK 0x30 -#define HW_FPGA0_INT_INTR_STATUS 0x34 -#define HW_FPGA0_INT_INTR_EOI 0x40 -#define HW_FPGA0_INT_SERIAL_CONFIG 0x5c - -#define HW_FPGA0_WDT_CTRL 0x44 -#define HW_FPGA0_WDT_PROG 0x48 -#define HW_FPGA0_WDT_VAL 0x4c -#define HW_FPGA0_WDT_REFRESH 0x50 - -#endif diff --git a/board/pcippc2/sconsole.c b/board/pcippc2/sconsole.c deleted file mode 100644 index aa3c908c63..0000000000 --- a/board/pcippc2/sconsole.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <serial.h> -#include <linux/compiler.h> - -#include "sconsole.h" - -DECLARE_GLOBAL_DATA_PTR; - -void (*sconsole_putc) (char) = 0; -void (*sconsole_puts) (const char *) = 0; -int (*sconsole_getc) (void) = 0; -int (*sconsole_tstc) (void) = 0; -void (*sconsole_setbrg) (void) = 0; - -static int sconsole_serial_init(void) -{ - sconsole_buffer_t *sb = SCONSOLE_BUFFER; - - sb->pos = 0; - sb->size = 0; - sb->baud = gd->baudrate; - sb->max_size = CONFIG_SYS_SCONSOLE_SIZE - sizeof (sconsole_buffer_t); - - return (0); -} - -static void sconsole_serial_putc(char c) -{ - if (sconsole_putc) { - (*sconsole_putc) (c); - } else { - sconsole_buffer_t *sb = SCONSOLE_BUFFER; - - if (c) { - sb->data[sb->pos++] = c; - if (sb->pos == sb->max_size) { - sb->pos = 0; - } - if (sb->size < sb->max_size) { - sb->size++; - } - } - } -} - -static void sconsole_serial_puts(const char *s) -{ - if (sconsole_puts) { - (*sconsole_puts) (s); - } else { - sconsole_buffer_t *sb = SCONSOLE_BUFFER; - - while (*s) { - sb->data[sb->pos++] = *s++; - if (sb->pos == sb->max_size) { - sb->pos = 0; - } - if (sb->size < sb->max_size) { - sb->size++; - } - } - } -} - -static int sconsole_serial_getc(void) -{ - if (sconsole_getc) { - return (*sconsole_getc) (); - } else { - return 0; - } -} - -static int sconsole_serial_tstc(void) -{ - if (sconsole_tstc) { - return (*sconsole_tstc) (); - } else { - return 0; - } -} - -static void sconsole_serial_setbrg(void) -{ - if (sconsole_setbrg) { - (*sconsole_setbrg) (); - } else { - sconsole_buffer_t *sb = SCONSOLE_BUFFER; - - sb->baud = gd->baudrate; - } -} - -static struct serial_device sconsole_serial_drv = { - .name = "sconsole_serial", - .start = sconsole_serial_init, - .stop = NULL, - .setbrg = sconsole_serial_setbrg, - .putc = sconsole_serial_putc, - .puts = sconsole_serial_puts, - .getc = sconsole_serial_getc, - .tstc = sconsole_serial_tstc, -}; - -void sconsole_serial_initialize(void) -{ - serial_register(&sconsole_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &sconsole_serial_drv; -} - -int sconsole_get_baudrate (void) -{ - sconsole_buffer_t *sb = SCONSOLE_BUFFER; - - return sb->baud; -} - -void sconsole_flush (void) -{ - if (sconsole_putc) { - sconsole_buffer_t *sb = SCONSOLE_BUFFER; - unsigned int end = sb->pos < sb->size - ? sb->pos + sb->max_size - sb->size - : sb->pos - sb->size; - - while (sb->size) { - (*sconsole_putc) (sb->data[end++]); - if (end == sb->max_size) { - end = 0; - } - sb->size--; - } - } -} diff --git a/board/pcippc2/sconsole.h b/board/pcippc2/sconsole.h deleted file mode 100644 index ff0ccabcdb..0000000000 --- a/board/pcippc2/sconsole.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _SCONSOLE_H_ -#define _SCONSOLE_H_ - -#include <config.h> - -typedef struct sconsole_buffer_s { - unsigned long size; - unsigned long max_size; - unsigned long pos; - unsigned long baud; - char data[1]; -} sconsole_buffer_t; - -#define SCONSOLE_BUFFER ((sconsole_buffer_t *) CONFIG_SYS_SCONSOLE_ADDR) - -extern void (* sconsole_putc) (char); -extern void (* sconsole_puts) (const char *); -extern int (* sconsole_getc) (void); -extern int (* sconsole_tstc) (void); -extern void (* sconsole_setbrg) (void); - -extern void sconsole_flush (void); -extern int sconsole_get_baudrate (void); - -#endif diff --git a/board/pdm360ng/pdm360ng.c b/board/pdm360ng/pdm360ng.c index a2a132344f..3048acd117 100644 --- a/board/pdm360ng/pdm360ng.c +++ b/board/pdm360ng/pdm360ng.c @@ -44,63 +44,6 @@ DECLARE_GLOBAL_DATA_PTR; extern flash_info_t flash_info[]; ulong flash_get_size (phys_addr_t base, int banknum); -/* Clocks in use */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_NFC_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_SPDIF_EN | \ - CLOCK_SCCR2_DIU_EN | \ - CLOCK_SCCR2_I2C_EN) - -int board_early_init_f(void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - - /* - * Initialize Local Window for FLASH-Bank1 access (CS1) - */ - out_be32(&im->sysconf.lpcs1aw, - CSAW_START(CONFIG_SYS_FLASH1_BASE) | - CSAW_STOP(CONFIG_SYS_FLASH1_BASE, CONFIG_SYS_FLASH_SIZE) - ); - out_be32(&im->lpc.cs_cfg[1], CONFIG_SYS_CS1_CFG); - - /* - * Local Window for MRAM access (CS2) - */ - out_be32(&im->sysconf.lpcs2aw, - CSAW_START(CONFIG_SYS_MRAM_BASE) | - CSAW_STOP(CONFIG_SYS_MRAM_BASE, CONFIG_SYS_MRAM_SIZE) - ); - out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG); - - sync_law(&im->sysconf.lpcs2aw); - - /* - * Configure Flash Speed - */ - out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG); - out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING); - - /* - * Enable clocks - */ - out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN); - out_be32(&im->clk.sccr[1], SCCR2_CLOCKS_EN); -#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE) - setbits_be32(&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN); -#endif - - return 0; -} - sdram_conf_t mddrc_config[] = { { (512 << 20), /* 512 MB RAM configuration */ @@ -557,7 +500,6 @@ void ft_board_setup(void *blob, bd_t *bd) int rc, i = 0; ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); #ifdef CONFIG_FDT_FIXUP_PARTITIONS fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); #endif diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c index 55bc018714..1708ac2acd 100644 --- a/board/phytec/pcm051/board.c +++ b/board/phytec/pcm051/board.c @@ -61,7 +61,7 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; static void rtc32k_enable(void) { - struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE; + struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE; /* * Unlock the RTC's registers. For more details please see the @@ -159,7 +159,7 @@ void s_init(void) enable_board_pin_mux(); config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data, - &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data); + &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); #endif } @@ -199,8 +199,8 @@ static struct cpsw_slave_data cpsw_slaves[] = { }; static struct cpsw_platform_data cpsw_data = { - .mdio_base = AM335X_CPSW_MDIO_BASE, - .cpsw_base = AM335X_CPSW_BASE, + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, .mdio_div = 0xff, .channels = 8, .cpdma_reg_ofs = 0x800, diff --git a/board/phytec/pcm051/mux.c b/board/phytec/pcm051/mux.c index 4d3a1d5f88..6e9c3d257c 100644 --- a/board/phytec/pcm051/mux.c +++ b/board/phytec/pcm051/mux.c @@ -35,7 +35,6 @@ static struct module_pin_mux mmc0_pin_mux[] = { {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ - {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ {-1}, }; diff --git a/board/quantum/u-boot.lds b/board/quantum/u-boot.lds index 18f962cfa5..3334a44f61 100644 --- a/board/quantum/u-boot.lds +++ b/board/quantum/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/r360mpi/u-boot.lds b/board/r360mpi/u-boot.lds index 3ef0d9e0b7..ef3a17fbbe 100644 --- a/board/r360mpi/u-boot.lds +++ b/board/r360mpi/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -95,7 +95,7 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); . = ALIGN(128 * 1024); .ppcenv : diff --git a/board/raspberrypi/rpi_b/rpi_b.c b/board/raspberrypi/rpi_b/rpi_b.c index 688b0aade1..6b3e095ba8 100644 --- a/board/raspberrypi/rpi_b/rpi_b.c +++ b/board/raspberrypi/rpi_b/rpi_b.c @@ -15,13 +15,39 @@ */ #include <common.h> +#include <asm/arch/mbox.h> +#include <asm/arch/sdhci.h> #include <asm/global_data.h> DECLARE_GLOBAL_DATA_PTR; +struct msg_get_arm_mem { + struct bcm2835_mbox_hdr hdr; + struct bcm2835_mbox_tag_get_arm_mem get_arm_mem; + u32 end_tag; +}; + +struct msg_get_clock_rate { + struct bcm2835_mbox_hdr hdr; + struct bcm2835_mbox_tag_get_clock_rate get_clock_rate; + u32 end_tag; +}; + int dram_init(void) { - gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + ALLOC_ALIGN_BUFFER(struct msg_get_arm_mem, msg, 1, 16); + int ret; + + BCM2835_MBOX_INIT_HDR(msg); + BCM2835_MBOX_INIT_TAG(&msg->get_arm_mem, GET_ARM_MEMORY); + + ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr); + if (ret) { + printf("bcm2835: Could not query ARM memory size\n"); + return -1; + } + + gd->ram_size = msg->get_arm_mem.body.resp.mem_size; return 0; } @@ -32,3 +58,22 @@ int board_init(void) return 0; } + +int board_mmc_init(void) +{ + ALLOC_ALIGN_BUFFER(struct msg_get_clock_rate, msg_clk, 1, 16); + int ret; + + BCM2835_MBOX_INIT_HDR(msg_clk); + BCM2835_MBOX_INIT_TAG(&msg_clk->get_clock_rate, GET_CLOCK_RATE); + msg_clk->get_clock_rate.body.req.clock_id = BCM2835_MBOX_CLOCK_ID_EMMC; + + ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_clk->hdr); + if (ret) { + printf("bcm2835: Could not query eMMC clock rate\n"); + return -1; + } + + return bcm2835_sdhci_init(BCM2835_SDHCI_BASE, + msg_clk->get_clock_rate.body.resp.rate_hz); +} diff --git a/board/rbc823/u-boot.lds b/board/rbc823/u-boot.lds index a86b568f6e..b35440958c 100644 --- a/board/rbc823/u-boot.lds +++ b/board/rbc823/u-boot.lds @@ -80,7 +80,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = .; @@ -103,6 +103,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/renesas/sh7752evb/u-boot.lds b/board/renesas/sh7752evb/u-boot.lds index 28449b677a..276f525eb7 100644 --- a/board/renesas/sh7752evb/u-boot.lds +++ b/board/renesas/sh7752evb/u-boot.lds @@ -78,7 +78,7 @@ SECTIONS PROVIDE (_egot = .); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .); @@ -93,5 +93,5 @@ SECTIONS } PROVIDE (bss_end = .); - PROVIDE (__bss_end__ = .); + PROVIDE (__bss_end = .); } diff --git a/board/renesas/sh7757lcr/u-boot.lds b/board/renesas/sh7757lcr/u-boot.lds index cf406ce966..58824271cb 100644 --- a/board/renesas/sh7757lcr/u-boot.lds +++ b/board/renesas/sh7757lcr/u-boot.lds @@ -79,7 +79,7 @@ SECTIONS .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } PROVIDE (reloc_dst_end = .); @@ -94,5 +94,5 @@ SECTIONS } PROVIDE (bss_end = .); - PROVIDE (__bss_end__ = .); + PROVIDE (__bss_end = .); } diff --git a/board/rsdproto/u-boot.lds b/board/rsdproto/u-boot.lds index ff950294f3..240b9363c8 100644 --- a/board/rsdproto/u-boot.lds +++ b/board/rsdproto/u-boot.lds @@ -100,7 +100,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -125,6 +125,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/samsung/smdk5250/smdk5250-uboot-spl.lds b/board/samsung/smdk5250/smdk5250-uboot-spl.lds index 951d8cec1d..4c8baaa9db 100644 --- a/board/samsung/smdk5250/smdk5250-uboot-spl.lds +++ b/board/samsung/smdk5250/smdk5250-uboot-spl.lds @@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } >.sram . = ALIGN(4); @@ -66,6 +66,6 @@ SECTIONS __bss_start = .; *(.bss*) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } >.sram } diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds index fbb442a02b..64c650d2e9 100644 --- a/board/samsung/smdk6400/u-boot-nand.lds +++ b/board/samsung/smdk6400/u-boot-nand.lds @@ -50,7 +50,7 @@ SECTIONS . = align(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } . = align(4); @@ -75,7 +75,7 @@ SECTIONS __bss_start = .; *(.bss) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } /DISCARD/ : { *(.dynstr*) } diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 88d193de28..920764664c 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -42,6 +42,7 @@ #include <power/max8997_muic.h> #include <power/battery.h> #include <power/max17042_fg.h> +#include <usb_mass_storage.h> #include "setup.h" @@ -791,3 +792,65 @@ void init_panel_info(vidinfo_t *vid) setenv("lcdinfo", "lcd=s6e8ax0"); } + +#ifdef CONFIG_USB_GADGET_MASS_STORAGE +static int ums_read_sector(struct ums_device *ums_dev, + ulong start, lbaint_t blkcnt, void *buf) +{ + if (ums_dev->mmc->block_dev.block_read(ums_dev->dev_num, + start + ums_dev->offset, blkcnt, buf) != blkcnt) + return -1; + + return 0; +} + +static int ums_write_sector(struct ums_device *ums_dev, + ulong start, lbaint_t blkcnt, const void *buf) +{ + if (ums_dev->mmc->block_dev.block_write(ums_dev->dev_num, + start + ums_dev->offset, blkcnt, buf) != blkcnt) + return -1; + + return 0; +} + +static void ums_get_capacity(struct ums_device *ums_dev, + long long int *capacity) +{ + long long int tmp_capacity; + + tmp_capacity = (long long int) ((ums_dev->offset + ums_dev->part_size) + * SECTOR_SIZE); + *capacity = ums_dev->mmc->capacity - tmp_capacity; +} + +static struct ums_board_info ums_board = { + .read_sector = ums_read_sector, + .write_sector = ums_write_sector, + .get_capacity = ums_get_capacity, + .name = "TRATS UMS disk", + .ums_dev = { + .mmc = NULL, + .dev_num = 0, + .offset = 0, + .part_size = 0. + }, +}; + +struct ums_board_info *board_ums_init(unsigned int dev_num, unsigned int offset, + unsigned int part_size) +{ + struct mmc *mmc; + + mmc = find_mmc_device(dev_num); + if (!mmc) + return NULL; + + ums_board.ums_dev.mmc = mmc; + ums_board.ums_dev.dev_num = dev_num; + ums_board.ums_dev.offset = offset; + ums_board.ums_dev.part_size = part_size; + + return &ums_board; +} +#endif diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug index 7a0757f146..6b99f135ad 100644 --- a/board/sandburst/karef/u-boot.lds.debug +++ b/board/sandburst/karef/u-boot.lds.debug @@ -118,7 +118,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug index 07bd6fe19f..0b4192e867 100644 --- a/board/sandburst/metrobox/u-boot.lds.debug +++ b/board/sandburst/metrobox/u-boot.lds.debug @@ -118,7 +118,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/sandpoint/u-boot.lds b/board/sandpoint/u-boot.lds index ae3afa1130..95e13c46df 100644 --- a/board/sandpoint/u-boot.lds +++ b/board/sandpoint/u-boot.lds @@ -71,7 +71,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -95,6 +95,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/sixnet/u-boot.lds b/board/sixnet/u-boot.lds index 6cf7a01738..66c5fba210 100644 --- a/board/sixnet/u-boot.lds +++ b/board/sixnet/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/snmc/qs850/u-boot.lds b/board/snmc/qs850/u-boot.lds index f57f8a0258..285e8971ff 100644 --- a/board/snmc/qs850/u-boot.lds +++ b/board/snmc/qs850/u-boot.lds @@ -72,7 +72,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -96,6 +96,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/snmc/qs860t/u-boot.lds b/board/snmc/qs860t/u-boot.lds index 18f962cfa5..3334a44f61 100644 --- a/board/snmc/qs860t/u-boot.lds +++ b/board/snmc/qs860t/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/spc1920/u-boot.lds b/board/spc1920/u-boot.lds index 18f962cfa5..3334a44f61 100644 --- a/board/spc1920/u-boot.lds +++ b/board/spc1920/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/spd8xx/u-boot.lds b/board/spd8xx/u-boot.lds index f69e39d583..58f2565f7f 100644 --- a/board/spd8xx/u-boot.lds +++ b/board/spd8xx/u-boot.lds @@ -78,7 +78,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -102,6 +102,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/spd8xx/u-boot.lds.debug b/board/spd8xx/u-boot.lds.debug index 4155b604fb..063f2cc92f 100644 --- a/board/spd8xx/u-boot.lds.debug +++ b/board/spd8xx/u-boot.lds.debug @@ -110,7 +110,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/stx/stxxtc/u-boot.lds b/board/stx/stxxtc/u-boot.lds index cdc1fdac2c..03891e937f 100644 --- a/board/stx/stxxtc/u-boot.lds +++ b/board/stx/stxxtc/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/stx/stxxtc/u-boot.lds.debug b/board/stx/stxxtc/u-boot.lds.debug index 900da64859..e1fe052c37 100644 --- a/board/stx/stxxtc/u-boot.lds.debug +++ b/board/stx/stxxtc/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/svm_sc8xx/u-boot.lds b/board/svm_sc8xx/u-boot.lds index 163587512b..99b8bfa5bf 100644 --- a/board/svm_sc8xx/u-boot.lds +++ b/board/svm_sc8xx/u-boot.lds @@ -86,7 +86,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -110,6 +110,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c index c9eea9b304..a28c7043f9 100644 --- a/board/technexion/twister/twister.c +++ b/board/technexion/twister/twister.c @@ -147,7 +147,7 @@ int board_eth_init(bd_t *bis) !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif @@ -165,10 +165,10 @@ void spl_board_prepare_for_linux(void) int spl_start_uboot(void) { int val = 0; - if (!gpio_request(CONFIG_SPL_OS_BOOT_KEY, "U-Boot key")) { - gpio_direction_input(CONFIG_SPL_OS_BOOT_KEY); - val = gpio_get_value(CONFIG_SPL_OS_BOOT_KEY); - gpio_free(CONFIG_SPL_OS_BOOT_KEY); + if (!gpio_request(SPL_OS_BOOT_KEY, "U-Boot key")) { + gpio_direction_input(SPL_OS_BOOT_KEY); + val = gpio_get_value(SPL_OS_BOOT_KEY); + gpio_free(SPL_OS_BOOT_KEY); } return val; } diff --git a/board/technexion/twister/twister.h b/board/technexion/twister/twister.h index a2051c0044..cff479c07f 100644 --- a/board/technexion/twister/twister.h +++ b/board/technexion/twister/twister.h @@ -38,6 +38,8 @@ const omap3_sysinfo sysinfo = { #define XR16L2751_UART1_BASE 0x21000000 #define XR16L2751_UART2_BASE 0x23000000 +/* GPIO used to select between U-Boot and kernel */ +#define SPL_OS_BOOT_KEY 55 /* * IEN - Input Enable diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c index c516c75a00..d57678668b 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.c +++ b/board/teejet/mt_ventoux/mt_ventoux.c @@ -81,6 +81,7 @@ static struct panel_config lcd_cfg[] = { .data_lines = 0x03, /* 24 Bit RGB */ .load_mode = 0x02, /* Frame Mode */ .panel_color = 0, + .gfx_format = GFXFORMAT_RGB24_UNPACKED, }, { .timing_h = PANEL_TIMING_H(20, 192, 4), @@ -91,6 +92,7 @@ static struct panel_config lcd_cfg[] = { .data_lines = 0x03, /* 24 Bit RGB */ .load_mode = 0x02, /* Frame Mode */ .panel_color = 0, + .gfx_format = GFXFORMAT_RGB24_UNPACKED, } }; #endif @@ -304,7 +306,7 @@ int board_eth_init(bd_t *bis) !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - return omap_mmc_init(0, 0, 0); + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 48e68967e5..12620bb69c 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -73,7 +73,7 @@ static inline int board_is_idk(void) return !strncmp(header.config, "SKU#02", 6); } -static int board_is_gp_evm(void) +static int __maybe_unused board_is_gp_evm(void) { return !strncmp("A33515BB", header.name, 8); } @@ -134,7 +134,7 @@ static int read_eeprom(void) static void rtc32k_enable(void) { - struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE; + struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE; /* * Unlock the RTC's registers. For more details please see the @@ -208,6 +208,14 @@ static const struct ddr_data ddr3_data = { .datadldiff0 = PHY_DLL_LOCK_DIFF, }; +static const struct ddr_data ddr3_beagleblack_data = { + .datardsratio0 = MT41K256M16HA125E_RD_DQS, + .datawdsratio0 = MT41K256M16HA125E_WR_DQS, + .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, + .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + static const struct ddr_data ddr3_evm_data = { .datardsratio0 = MT41J512M8RH125_RD_DQS, .datawdsratio0 = MT41J512M8RH125_WR_DQS, @@ -230,6 +238,20 @@ static const struct cmd_control ddr3_cmd_ctrl_data = { .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT, }; +static const struct cmd_control ddr3_beagleblack_cmd_ctrl_data = { + .cmd0csratio = MT41K256M16HA125E_RATIO, + .cmd0dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF, + .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, + + .cmd1csratio = MT41K256M16HA125E_RATIO, + .cmd1dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF, + .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, + + .cmd2csratio = MT41K256M16HA125E_RATIO, + .cmd2dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF, + .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, +}; + static const struct cmd_control ddr3_evm_cmd_ctrl_data = { .cmd0csratio = MT41J512M8RH125_RATIO, .cmd0dldiff = MT41J512M8RH125_DLL_LOCK_DIFF, @@ -251,7 +273,18 @@ static struct emif_regs ddr3_emif_reg_data = { .sdram_tim2 = MT41J128MJT125_EMIF_TIM2, .sdram_tim3 = MT41J128MJT125_EMIF_TIM3, .zq_config = MT41J128MJT125_ZQ_CFG, - .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY, + .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY | + PHY_EN_DYN_PWRDN, +}; + +static struct emif_regs ddr3_beagleblack_emif_reg_data = { + .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, + .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, + .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, + .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, + .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, + .zq_config = MT41K256M16HA125E_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY, }; static struct emif_regs ddr3_evm_emif_reg_data = { @@ -261,7 +294,8 @@ static struct emif_regs ddr3_evm_emif_reg_data = { .sdram_tim2 = MT41J512M8RH125_EMIF_TIM2, .sdram_tim3 = MT41J512M8RH125_EMIF_TIM3, .zq_config = MT41J512M8RH125_ZQ_CFG, - .emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY, + .emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY | + PHY_EN_DYN_PWRDN, }; #endif @@ -341,15 +375,20 @@ void s_init(void) gpio_direction_output(GPIO_DDR_VTT_EN, 1); } - if (board_is_evm_sk() || board_is_bone_lt()) + if (board_is_evm_sk()) config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data, - &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data); + &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); + else if (board_is_bone_lt()) + config_ddr(303, MT41K256M16HA125E_IOCTRL_VALUE, + &ddr3_beagleblack_data, + &ddr3_beagleblack_cmd_ctrl_data, + &ddr3_beagleblack_emif_reg_data, 0); else if (board_is_evm_15_or_later()) config_ddr(303, MT41J512M8RH125_IOCTRL_VALUE, &ddr3_evm_data, - &ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data); + &ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data, 0); else config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data, - &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data); + &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0); #endif } @@ -389,7 +428,8 @@ int board_late_init(void) } #endif -#ifdef CONFIG_DRIVER_TI_CPSW +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) static void cpsw_control(int enabled) { /* VTP can be added here */ @@ -411,8 +451,8 @@ static struct cpsw_slave_data cpsw_slaves[] = { }; static struct cpsw_platform_data cpsw_data = { - .mdio_base = AM335X_CPSW_MDIO_BASE, - .cpsw_base = AM335X_CPSW_BASE, + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, .mdio_div = 0xff, .channels = 8, .cpdma_reg_ofs = 0x800, @@ -434,26 +474,26 @@ static struct cpsw_platform_data cpsw_data = { int board_eth_init(bd_t *bis) { int rv, n = 0; -#ifdef CONFIG_DRIVER_TI_CPSW uint8_t mac_addr[6]; uint32_t mac_hi, mac_lo; - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { - printf("<ethaddr> not set. Reading from E-fuse\n"); - /* try reading mac address from efuse */ - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + if (!getenv("ethaddr")) { + printf("<ethaddr> not set. Validating first E-fuse MAC\n"); if (is_valid_ether_addr(mac_addr)) eth_setenv_enetaddr("ethaddr", mac_addr); - else - goto try_usbether; } if (board_is_bone() || board_is_bone_lt() || board_is_idk()) { @@ -494,8 +534,11 @@ int board_eth_init(bd_t *bis) AR8051_RGMII_TX_CLK_DLY); } #endif -try_usbether: -#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_USB_ETHER) && \ + (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT)) + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("usbnet_devaddr", mac_addr); + rv = usb_eth_initialize(bis); if (rv < 0) printf("Error %d registering USB_ETHER\n", rv); diff --git a/board/ti/am3517crane/am3517crane.c b/board/ti/am3517crane/am3517crane.c index 888398deac..0b94245e02 100644 --- a/board/ti/am3517crane/am3517crane.c +++ b/board/ti/am3517crane/am3517crane.c @@ -78,7 +78,6 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index b829a792b2..3d9b6dd8fd 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -72,6 +72,7 @@ #define BBTOYS_LCD 0x03000B00 #define BCT_BRETTL3 0x01000F00 #define BCT_BRETTL4 0x02000F00 +#define LSR_COM6L_ADPT 0x01001300 #define BEAGLE_NO_EEPROM 0xffffffff DECLARE_GLOBAL_DATA_PTR; @@ -227,6 +228,14 @@ static unsigned int get_expansion_id(void) i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config, sizeof(expansion_config)); + /* retry reading configuration data with 16bit addressing */ + if ((expansion_config.device_vendor == 0xFFFFFF00) || + (expansion_config.device_vendor == 0xFFFFFFFF)) { + printf("EEPROM is blank or 8bit addressing failed: retrying with 16bit:\n"); + i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config, + sizeof(expansion_config)); + } + i2c_set_bus_num(TWL4030_I2C_BUS); return expansion_config.device_vendor; @@ -454,6 +463,11 @@ int misc_init_r(void) case BCT_BRETTL4: printf("Recognized bct electronic GmbH brettl4 board\n"); break; + case LSR_COM6L_ADPT: + printf("Recognized LSR COM6L Adapter Board\n"); + MUX_BBTOYS_WIFI() + setenv("buddy", "lsr-com6l-adpt"); + break; case BEAGLE_NO_EEPROM: printf("No EEPROM on expansion board\n"); setenv("buddy", "none"); @@ -518,8 +532,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h index c0a94a92c1..6d71bbc79d 100644 --- a/board/ti/beagle/beagle.h +++ b/board/ti/beagle/beagle.h @@ -544,7 +544,8 @@ static const struct panel_config dvid_cfg = { .panel_type = 0x01, /* TFT */ .data_lines = 0x03, /* 24 Bit RGB */ .load_mode = 0x02, /* Frame Mode */ - .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */ + .panel_color = DVI_BEAGLE_ORANGE_COL, /* ORANGE */ + .gfx_format = GFXFORMAT_RGB24_UNPACKED, }; static const struct panel_config dvid_cfg_xm = { @@ -556,6 +557,7 @@ static const struct panel_config dvid_cfg_xm = { .panel_type = 0x01, /* TFT */ .data_lines = 0x03, /* 24 Bit RGB */ .load_mode = 0x02, /* Frame Mode */ - .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */ + .panel_color = DVI_BEAGLE_ORANGE_COL, /* ORANGE */ + .gfx_format = GFXFORMAT_RGB24_UNPACKED, }; #endif diff --git a/board/pcippc2/Makefile b/board/ti/dra7xx/Makefile index 6f0a928805..db6da5ba21 100644 --- a/board/pcippc2/Makefile +++ b/board/ti/dra7xx/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2002-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# (C) Copyright 2013 +# Texas Instruments, <www.ti.com> # # See file CREDITS for list of people who contributed to this # project. @@ -12,7 +12,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -25,17 +25,19 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS = $(BOARD).o cpc710_pci.o flash.o sconsole.o \ - fpga_serial.o pcippc2_fpga.o cpc710_init_ram.o i2c.o +COBJS := evm.o -SOBJS = - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c new file mode 100644 index 0000000000..7bbb5492fe --- /dev/null +++ b/board/ti/dra7xx/evm.c @@ -0,0 +1,103 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated, <www.ti.com> + * + * Lokesh Vutla <lokeshvutla@ti.com> + * + * Based on previous work by: + * Aneesh V <aneesh@ti.com> + * Steve Sakoman <steve@sakoman.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <twl6035.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mmc_host_def.h> + +#include "mux_data.h" + +#ifdef CONFIG_USB_EHCI +#include <usb.h> +#include <asm/arch/ehci.h> +#include <asm/ehci-omap.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +const struct omap_sysinfo sysinfo = { + "Board: DRA7xx\n" +}; + +/** + * @brief board_init + * + * @return 0 + */ +int board_init(void) +{ + gpmc_init(); + gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */ + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + return 0; +} + +/** + * @brief misc_init_r - Configure EVM board specific configurations + * such as power configurations, ethernet initialization as phase2 of + * boot sequence + * + * @return 0 + */ +int misc_init_r(void) +{ + return 0; +} + +static void do_set_mux32(u32 base, + struct pad_conf_entry const *array, int size) +{ + int i; + struct pad_conf_entry *pad = (struct pad_conf_entry *)array; + + for (i = 0; i < size; i++, pad++) + writel(pad->val, base + pad->offset); +} + +void set_muxconf_regs_essential(void) +{ + do_set_mux32((*ctrl)->control_padconf_core_base, + core_padconf_array_essential, + sizeof(core_padconf_array_essential) / + sizeof(struct pad_conf_entry)); +} + +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); + return 0; +} +#endif diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h new file mode 100644 index 0000000000..04c95fd376 --- /dev/null +++ b/board/ti/dra7xx/mux_data.h @@ -0,0 +1,47 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated, <www.ti.com> + * + * Sricharan R <r.sricharan@ti.com> + * Nishant Kamat <nskamat@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _MUX_DATA_DRA7XX_H_ +#define _MUX_DATA_DRA7XX_H_ + +#include <asm/arch/mux_dra7xx.h> + +const struct pad_conf_entry core_padconf_array_essential[] = { + {MMC1_CLK, (PTU | IEN | M0)}, /* MMC1_CLK */ + {MMC1_CMD, (PTU | IEN | M0)}, /* MMC1_CMD */ + {MMC1_DAT0, (PTU | IEN | M0)}, /* MMC1_DAT0 */ + {MMC1_DAT1, (PTU | IEN | M0)}, /* MMC1_DAT1 */ + {MMC1_DAT2, (PTU | IEN | M0)}, /* MMC1_DAT2 */ + {MMC1_DAT3, (PTU | IEN | M0)}, /* MMC1_DAT3 */ + {MMC1_SDCD, (PTU | IEN | M0)}, /* MMC1_SDCD */ + {MMC1_SDWP, (PTU | IEN | M0)}, /* MMC1_SDWP */ + {UART1_RXD, (PTU | IEN | M0)}, /* UART1_RXD */ + {UART1_TXD, (M0)}, /* UART1_TXD */ + {UART1_CTSN, (PTU | IEN | M0)}, /* UART1_CTSN */ + {UART1_RTSN, (M0)}, /* UART1_RTSN */ + {I2C1_SDA, (PTU | IEN | M0)}, /* I2C1_SDA */ + {I2C1_SCL, (PTU | IEN | M0)}, /* I2C1_SCL */ +}; +#endif /* _MUX_DATA_DRA7XX_H_ */ diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c index 8a3aa0c5bf..3c2dcab68c 100644 --- a/board/ti/evm/evm.c +++ b/board/ti/evm/evm.c @@ -277,7 +277,6 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/omap5_evm/evm.c b/board/ti/omap5_evm/evm.c index c8dfdf8142..55337c09d5 100644 --- a/board/ti/omap5_evm/evm.c +++ b/board/ti/omap5_evm/evm.c @@ -94,8 +94,8 @@ void set_muxconf_regs_non_essential(void) #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - omap_mmc_init(1, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); return 0; } #endif diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index 4feef78efe..cab059863d 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -179,8 +179,7 @@ void set_muxconf_regs_non_essential(void) #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c index 9a1c012145..052efc589f 100644 --- a/board/ti/sdp3430/sdp.c +++ b/board/ti/sdp3430/sdp.c @@ -209,7 +209,6 @@ void set_muxconf_regs(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c index 982c771a73..4c1a4f7e78 100644 --- a/board/ti/sdp4430/sdp.c +++ b/board/ti/sdp4430/sdp.c @@ -108,8 +108,8 @@ void set_muxconf_regs_non_essential(void) #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - omap_mmc_init(1, 0, 0); + omap_mmc_init(0, 0, 0, -1, -1); + omap_mmc_init(1, 0, 0, -1, -1); return 0; } #endif diff --git a/board/ti/ti814x/Makefile b/board/ti/ti814x/Makefile new file mode 100644 index 0000000000..09d24222f3 --- /dev/null +++ b/board/ti/ti814x/Makefile @@ -0,0 +1,46 @@ +# +# Makefile +# +# Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed "as is" WITHOUT ANY WARRANTY of any +# kind, whether express or implied; without even the implied warranty +# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +ifdef CONFIG_SPL_BUILD +COBJS := mux.o +endif + +COBJS += evm.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c new file mode 100644 index 0000000000..446e36b844 --- /dev/null +++ b/board/ti/ti814x/evm.c @@ -0,0 +1,198 @@ +/* + * evm.c + * + * Board functions for TI814x EVM + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include "evm.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_SPL_BUILD +static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; +static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; +#endif + +/* UART Defines */ +#ifdef CONFIG_SPL_BUILD +#define UART_RESET (0x1 << 1) +#define UART_CLK_RUNNING_MASK 0x1 +#define UART_SMART_IDLE_EN (0x1 << 0x3) + +static void rtc32k_enable(void) +{ + struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE; + + /* + * Unlock the RTC's registers. For more details please see the + * RTC_SS section of the TRM. In order to unlock we need to + * write these specific values (keys) in this order. + */ + writel(0x83e70b13, &rtc->kick0r); + writel(0x95a4f1e0, &rtc->kick1r); + + /* Enable the RTC 32K OSC by setting bits 3 and 6. */ + writel((1 << 3) | (1 << 6), &rtc->osc); +} + +static void uart_enable(void) +{ + u32 regVal; + + /* UART softreset */ + regVal = readl(&uart_base->uartsyscfg); + regVal |= UART_RESET; + writel(regVal, &uart_base->uartsyscfg); + while ((readl(&uart_base->uartsyssts) & + UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK) + ; + + /* Disable smart idle */ + regVal = readl(&uart_base->uartsyscfg); + regVal |= UART_SMART_IDLE_EN; + writel(regVal, &uart_base->uartsyscfg); +} + +static void wdt_disable(void) +{ + writel(0xAAAA, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; + writel(0x5555, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; +} + +static const struct cmd_control evm_ddr2_cctrl_data = { + .cmd0csratio = 0x80, + .cmd0dldiff = 0x04, + .cmd0iclkout = 0x00, + + .cmd1csratio = 0x80, + .cmd1dldiff = 0x04, + .cmd1iclkout = 0x00, + + .cmd2csratio = 0x80, + .cmd2dldiff = 0x04, + .cmd2iclkout = 0x00, +}; + +static const struct emif_regs evm_ddr2_emif0_regs = { + .sdram_config = 0x40801ab2, + .ref_ctrl = 0x10000c30, + .sdram_tim1 = 0x0aaaf552, + .sdram_tim2 = 0x043631d2, + .sdram_tim3 = 0x00000327, + .emif_ddr_phy_ctlr_1 = 0x00000007 +}; + +static const struct emif_regs evm_ddr2_emif1_regs = { + .sdram_config = 0x40801ab2, + .ref_ctrl = 0x10000c30, + .sdram_tim1 = 0x0aaaf552, + .sdram_tim2 = 0x043631d2, + .sdram_tim3 = 0x00000327, + .emif_ddr_phy_ctlr_1 = 0x00000007 +}; + +const struct dmm_lisa_map_regs evm_lisa_map_regs = { + .dmm_lisa_map_0 = 0x00000000, + .dmm_lisa_map_1 = 0x00000000, + .dmm_lisa_map_2 = 0x806c0300, + .dmm_lisa_map_3 = 0x806c0300, +}; + +static const struct ddr_data evm_ddr2_data = { + .datardsratio0 = ((0x35<<10) | (0x35<<0)), + .datawdsratio0 = ((0x20<<10) | (0x20<<0)), + .datawiratio0 = ((0<<10) | (0<<0)), + .datagiratio0 = ((0<<10) | (0<<0)), + .datafwsratio0 = ((0x90<<10) | (0x90<<0)), + .datawrsratio0 = ((0x50<<10) | (0x50<<0)), + .datauserank0delay = 1, + .datadldiff0 = 0x4, +}; +#endif + +/* + * early system init of muxing and clocks. + */ +void s_init(void) +{ +#ifdef CONFIG_SPL_BUILD + /* WDT1 is already running when the bootloader gets control + * Disable it to avoid "random" resets + */ + wdt_disable(); + + /* Setup the PLLs and the clocks for the peripherals */ + pll_init(); + + /* Enable RTC32K clock */ + rtc32k_enable(); + + /* Set UART pins */ + enable_uart0_pin_mux(); + + /* Set MMC pins */ + enable_mmc1_pin_mux(); + + /* Enable UART */ + uart_enable(); + + gd = &gdata; + + preloader_console_init(); + + config_dmm(&evm_lisa_map_regs); + + config_ddr(0, 0, &evm_ddr2_data, &evm_ddr2_cctrl_data, + &evm_ddr2_emif0_regs, 0); + config_ddr(0, 0, &evm_ddr2_data, &evm_ddr2_cctrl_data, + &evm_ddr2_emif1_regs, 1); +#endif +} + +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ + gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + return 0; +} + +#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC) +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(1, 0, 0, -1, -1); + + return 0; +} +#endif diff --git a/board/ti/ti814x/evm.h b/board/ti/ti814x/evm.h new file mode 100644 index 0000000000..40f8710c89 --- /dev/null +++ b/board/ti/ti814x/evm.h @@ -0,0 +1,7 @@ +#ifndef _EVM_H +#define _EVM_H + +void enable_uart0_pin_mux(void); +void enable_mmc1_pin_mux(void); + +#endif /* _EVM_H */ diff --git a/board/ti/ti814x/mux.c b/board/ti/ti814x/mux.c new file mode 100644 index 0000000000..137acb4523 --- /dev/null +++ b/board/ti/ti814x/mux.c @@ -0,0 +1,51 @@ +/* + * mux.c + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> +#include <i2c.h> +#include "evm.h" + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(pincntl70), PULLUP_EN | MODE(0x01)}, /* UART0_RXD */ + {OFFSET(pincntl71), PULLUP_EN | MODE(0x01)}, /* UART0_TXD */ + {-1}, +}; + +static struct module_pin_mux mmc1_pin_mux[] = { + {OFFSET(pincntl1), PULLUP_EN | MODE(0x01)}, /* SD1_CLK */ + {OFFSET(pincntl2), PULLUP_EN | MODE(0x01)}, /* SD1_CMD */ + {OFFSET(pincntl3), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[0] */ + {OFFSET(pincntl4), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[1] */ + {OFFSET(pincntl5), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[2] */ + {OFFSET(pincntl6), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[3] */ + {OFFSET(pincntl74), PULLUP_EN | MODE(0x40)}, /* SD1_POW */ + {OFFSET(pincntl75), MODE(0x40)}, /* SD1_SDWP */ + {OFFSET(pincntl80), PULLUP_EN | MODE(0x02)}, /* SD1_SDCD */ + {-1}, +}; + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_mmc1_pin_mux(void) +{ + configure_module_pin_mux(mmc1_pin_mux); +} diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index 85685ee7c0..ebff59e70b 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -136,8 +136,7 @@ void set_muxconf_regs(void) #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { - omap_mmc_init(0, 0, 0); - return 0; + return omap_mmc_init(0, 0, 0, -1, -1); } #endif @@ -172,10 +171,10 @@ void spl_board_prepare_for_linux(void) int spl_start_uboot(void) { int val = 0; - if (!gpio_request(CONFIG_SPL_OS_BOOT_KEY, "U-Boot key")) { - gpio_direction_input(CONFIG_SPL_OS_BOOT_KEY); - val = gpio_get_value(CONFIG_SPL_OS_BOOT_KEY); - gpio_free(CONFIG_SPL_OS_BOOT_KEY); + if (!gpio_request(SPL_OS_BOOT_KEY, "U-Boot key")) { + gpio_direction_input(SPL_OS_BOOT_KEY); + val = gpio_get_value(SPL_OS_BOOT_KEY); + gpio_free(SPL_OS_BOOT_KEY); } return !val; } diff --git a/board/timll/devkit8000/devkit8000.h b/board/timll/devkit8000/devkit8000.h index aa69e6c965..c1965e2704 100644 --- a/board/timll/devkit8000/devkit8000.h +++ b/board/timll/devkit8000/devkit8000.h @@ -32,6 +32,9 @@ const omap3_sysinfo sysinfo = { "NAND", }; +/* GPIO used to select between U-Boot and kernel */ +#define SPL_OS_BOOT_KEY 26 + /* * IEN - Input Enable * IDIS - Input Disable diff --git a/board/toradex/colibri_t20_iris/colibri_t20_iris.c b/board/toradex/colibri_t20_iris/colibri_t20_iris.c index e40a98609f..aa76f65fde 100644 --- a/board/toradex/colibri_t20_iris/colibri_t20_iris.c +++ b/board/toradex/colibri_t20_iris/colibri_t20_iris.c @@ -19,7 +19,6 @@ #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> #include <asm/arch-tegra/board.h> -#include <asm/arch-tegra/mmc.h> #include "../colibri_t20-common/colibri_t20-common.h" @@ -34,13 +33,13 @@ void pin_mux_usb(void) #endif #ifdef CONFIG_TEGRA_MMC -int board_mmc_init(bd_t *bd) +/* + * Routine: pin_mux_mmc + * Description: setup the pin muxes/tristate values for the SDMMC(s) + */ +void pin_mux_mmc(void) { funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT); pinmux_tristate_disable(PINGRP_GMB); - - tegra_mmc_init(0, 4, -1, GPIO_PC7); - - return 0; } #endif diff --git a/board/toradex/dts/tegra20-colibri_t20_iris.dts b/board/toradex/dts/tegra20-colibri_t20_iris.dts index c29b43a0ef..c0e54af886 100644 --- a/board/toradex/dts/tegra20-colibri_t20_iris.dts +++ b/board/toradex/dts/tegra20-colibri_t20_iris.dts @@ -1,6 +1,6 @@ /dts-v1/; -/include/ ARCH_CPU_DTS +#include "tegra20.dtsi" / { model = "Toradex Colibri T20"; @@ -10,6 +10,7 @@ usb0 = "/usb@c5008000"; usb1 = "/usb@c5000000"; usb2 = "/usb@c5004000"; + sdhci0 = "/sdhci@c8000600"; }; usb@c5000000 { @@ -35,4 +36,10 @@ compatible = "nand-flash"; }; }; + + sdhci@c8000600 { + status = "okay"; + cd-gpios = <&gpio 23 1>; /* gpio PC7 */ + bus-width = <4>; + }; }; diff --git a/board/tqc/tqm8xx/u-boot.lds b/board/tqc/tqm8xx/u-boot.lds index e1e1ccd482..fbf321da54 100644 --- a/board/tqc/tqm8xx/u-boot.lds +++ b/board/tqc/tqm8xx/u-boot.lds @@ -82,7 +82,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -106,6 +106,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/v37/u-boot.lds b/board/v37/u-boot.lds index fd2d72e8ae..f25a01b3d5 100644 --- a/board/v37/u-boot.lds +++ b/board/v37/u-boot.lds @@ -69,7 +69,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } @@ -93,6 +93,6 @@ SECTIONS *(COMMON) . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; PROVIDE (end = .); } diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds index 20161a46a6..dc437d1f23 100644 --- a/board/vpac270/u-boot-spl.lds +++ b/board/vpac270/u-boot-spl.lds @@ -57,10 +57,6 @@ SECTIONS *(.data) } - .u_boot_list : { - #include <u-boot.lst> - } - . = ALIGN(4); .rel.dyn : { @@ -82,7 +78,7 @@ SECTIONS __bss_start = .; *(.bss) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } /DISCARD/ : { *(.bss*) } diff --git a/board/w7o/u-boot.lds.debug b/board/w7o/u-boot.lds.debug index 2ce5a9a71c..18b7752054 100644 --- a/board/w7o/u-boot.lds.debug +++ b/board/w7o/u-boot.lds.debug @@ -109,7 +109,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/board/woodburn/woodburn.c b/board/woodburn/woodburn.c index 5b044a95c0..7c36af080e 100644 --- a/board/woodburn/woodburn.c +++ b/board/woodburn/woodburn.c @@ -148,7 +148,7 @@ void board_init_f(ulong dummy) woodburn_init(); /* Clear the BSS. */ - memset(__bss_start, 0, __bss_end__ - __bss_start); + memset(__bss_start, 0, __bss_end - __bss_start); /* Set global data pointer. */ gd = &gdata; diff --git a/board/xes/xpedite1000/u-boot.lds.debug b/board/xes/xpedite1000/u-boot.lds.debug index c4e5706543..c02581d982 100644 --- a/board/xes/xpedite1000/u-boot.lds.debug +++ b/board/xes/xpedite1000/u-boot.lds.debug @@ -114,7 +114,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + KEEP(*(SORT(.u_boot_list*))); } diff --git a/boards.cfg b/boards.cfg index 54357eb5a2..5fc70be8f5 100644 --- a/boards.cfg +++ b/boards.cfg @@ -95,6 +95,7 @@ at91sam9g10ek_nandflash arm arm926ejs at91sam9261ek atmel at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0 at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1 at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH +at91sam9g20ek_2mmc_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH @@ -233,11 +234,14 @@ integratorap_cm946es arm arm946es integrator armltd integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES ca9x4_ct_vxp arm armv7 vexpress armltd am335x_evm arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1 +am335x_evm_spiboot arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPI_BOOT am335x_evm_uart1 arm armv7 am335x ti am33xx am335x_evm:SERIAL2,CONS_INDEX=2 am335x_evm_uart2 arm armv7 am335x ti am33xx am335x_evm:SERIAL3,CONS_INDEX=3 am335x_evm_uart3 arm armv7 am335x ti am33xx am335x_evm:SERIAL4,CONS_INDEX=4 am335x_evm_uart4 arm armv7 am335x ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5 am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6 +am335x_evm_usbspl arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1,SPL_USBETH_SUPPORT +ti814x_evm arm armv7 ti814x ti am33xx pcm051 arm armv7 pcm051 phytec am33xx pcm051 highbank arm armv7 highbank - highbank mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg @@ -254,6 +258,12 @@ mx6qsabreauto arm armv7 mx6qsabreauto freesca mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg mx6qsabresd arm armv7 mx6qsabresd freescale mx6 mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg eco5pk arm armv7 eco5pk 8dtech omap3 +nitrogen6dl arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024 +nitrogen6dl2g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl2g.cfg,MX6DL,DDR_MB=2048 +nitrogen6q arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024 +nitrogen6q2g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048 +nitrogen6s arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s.cfg,MX6S,DDR_MB=512 +nitrogen6s1g arm armv7 nitrogen6x boundary mx6 nitrogen6x:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024 cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 @@ -262,6 +272,7 @@ igep0020 arm armv7 igep00x0 isee igep0020_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0020,BOOT_NAND igep0030 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_ONENAND igep0030_nand arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0030,BOOT_NAND +igep0032 arm armv7 igep00x0 isee omap3 igep00x0:MACH_TYPE=MACH_TYPE_IGEP0032,BOOT_ONENAND am3517_evm arm armv7 am3517evm logicpd omap3 mt_ventoux arm armv7 mt_ventoux teejet omap3 omap3_zoom1 arm armv7 zoom1 logicpd omap3 @@ -282,6 +293,7 @@ nokia_rx51 arm armv7 rx51 nokia omap4_panda arm armv7 panda ti omap4 omap4_sdp4430 arm armv7 sdp4430 ti omap4 omap5_evm arm armv7 omap5_evm ti omap5 +dra7xx_evm arm armv7 dra7xx ti omap5 s5p_goni arm armv7 goni samsung s5pc1xx smdkc100 arm armv7 smdkc100 samsung s5pc1xx origen arm armv7 origen samsung exynos @@ -302,6 +314,7 @@ snowball arm armv7 snowball st-e kzm9g arm armv7 kzm9g kmc rmobile armadillo-800eva arm armv7 armadillo-800eva atmark-techno rmobile zynq arm armv7 zynq xilinx zynq +zynq_dcc arm armv7 zynq xilinx zynq zynq:ZYNQ_DCC socfpga_cyclone5 arm armv7 socfpga_cyclone5 altera socfpga actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2 actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB @@ -362,6 +375,7 @@ bf538f-ezkit blackfin blackfin bf548-ezkit blackfin blackfin bf561-acvilon blackfin blackfin bf561-ezkit blackfin blackfin +bf609-ezkit blackfin blackfin blackstamp blackfin blackfin blackvme blackfin blackfin br4 blackfin blackfin @@ -465,8 +479,6 @@ openrisc-generic openrisc or1200 openrisc-generic openris EVB64260 powerpc 74xx_7xx evb64260 - - EVB64260 EVB64260_750CX powerpc 74xx_7xx evb64260 - - EVB64260 P3G4 powerpc 74xx_7xx evb64260 -PCIPPC2 powerpc 74xx_7xx pcippc2 -PCIPPC6 powerpc 74xx_7xx pcippc2 ppmc7xx powerpc 74xx_7xx ZUMA powerpc 74xx_7xx evb64260 ELPPC powerpc 74xx_7xx elppc eltec @@ -481,10 +493,12 @@ aria powerpc mpc512x - daveden mecp5123 powerpc mpc512x - esd mpc5121ads powerpc mpc512x mpc5121ads freescale mpc5121ads_rev2 powerpc mpc512x mpc5121ads freescale - mpc5121ads:MPC5121ADS_REV2 +ac14xx powerpc mpc512x ac14xx ifm cmi_mpc5xx powerpc mpc5xx cmi PATI powerpc mpc5xx pati mpl a3m071 powerpc mpc5xxx a3m071 a4m072 powerpc mpc5xxx a4m072 +a4m2k powerpc mpc5xxx a3m071 - - a3m071:A4M2K BC3450 powerpc mpc5xxx bc3450 canmb powerpc mpc5xxx cm5200 powerpc mpc5xxx @@ -706,9 +720,10 @@ SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon TQM834x powerpc mpc83xx tqm834x tqc suvd3 powerpc mpc83xx km83xx keymile - suvd3:SUVD3 kmvect1 powerpc mpc83xx km83xx keymile - suvd3:KMVECT1 -tuge1 powerpc mpc83xx km83xx keymile - tuxx1:KM_DISABLE_APP2,TUGE1 -tuxx1 powerpc mpc83xx km83xx keymile -kmsupx5 powerpc mpc83xx km83xx keymile - tuxx1:KM_DISABLE_APP2,KMSUPX5 +tuge1 powerpc mpc83xx km83xx keymile - tuxx1:TUGE1 +tuxx1 powerpc mpc83xx km83xx keymile - tuxx1:TUXX1 +kmopti2 powerpc mpc83xx km83xx keymile - tuxx1:KMOPTI2 +kmsupx5 powerpc mpc83xx km83xx keymile - tuxx1:KMSUPX5 sbc8548 powerpc mpc85xx sbc8548 - - sbc8548 sbc8548_PCI_33 powerpc mpc85xx sbc8548 - - sbc8548:PCI,33 sbc8548_PCI_33_PCIE powerpc mpc85xx sbc8548 - - sbc8548:PCI,33,PCIE diff --git a/common/Makefile b/common/Makefile index 54fcc81588..1abf4ea794 100644 --- a/common/Makefile +++ b/common/Makefile @@ -36,6 +36,10 @@ COBJS-y += s_record.o COBJS-y += xyzModem.o COBJS-y += cmd_disk.o +# boards +COBJS-$(CONFIG_SYS_GENERIC_BOARD) += board_f.o +COBJS-$(CONFIG_SYS_GENERIC_BOARD) += board_r.o + # core command COBJS-y += cmd_boot.o COBJS-$(CONFIG_CMD_BOOTM) += cmd_bootm.o @@ -152,6 +156,7 @@ COBJS-$(CONFIG_CMD_PXE) += cmd_pxe.o COBJS-$(CONFIG_CMD_READ) += cmd_read.o COBJS-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o COBJS-$(CONFIG_CMD_REISER) += cmd_reiser.o +COBJS-$(CONFIG_SANDBOX) += cmd_sandbox.o COBJS-$(CONFIG_CMD_SATA) += cmd_sata.o COBJS-$(CONFIG_CMD_SF) += cmd_sf.o COBJS-$(CONFIG_CMD_SCSI) += cmd_scsi.o @@ -174,6 +179,7 @@ COBJS-y += cmd_usb.o COBJS-y += usb.o usb_hub.o COBJS-$(CONFIG_USB_STORAGE) += usb_storage.o endif +COBJS-$(CONFIG_CMD_USB_MASS_STORAGE) += cmd_usb_mass_storage.o COBJS-$(CONFIG_CMD_XIMG) += cmd_ximg.o COBJS-$(CONFIG_YAFFS2) += cmd_yaffs2.o COBJS-$(CONFIG_CMD_SPL) += cmd_spl.o diff --git a/common/board_f.c b/common/board_f.c new file mode 100644 index 0000000000..29b49c3ab6 --- /dev/null +++ b/common/board_f.c @@ -0,0 +1,1015 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * (C) Copyright 2002-2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/compiler.h> +#include <version.h> +#include <environment.h> +#include <fdtdec.h> +#if defined(CONFIG_CMD_IDE) +#include <ide.h> +#endif +#include <i2c.h> +#include <initcall.h> +#include <logbuff.h> + +/* TODO: Can we move these into arch/ headers? */ +#ifdef CONFIG_8xx +#include <mpc8xx.h> +#endif +#ifdef CONFIG_5xx +#include <mpc5xx.h> +#endif +#ifdef CONFIG_MPC5xxx +#include <mpc5xxx.h> +#endif + +#include <post.h> +#include <spi.h> +#include <watchdog.h> +#include <asm/io.h> +#ifdef CONFIG_MP +#include <asm/mp.h> +#endif +#include <asm/sections.h> +#ifdef CONFIG_X86 +#include <asm/init_helpers.h> +#include <asm/relocate.h> +#endif +#include <linux/compiler.h> + +/* + * Pointer to initial global data area + * + * Here we initialize it if needed. + */ +#ifdef XTRN_DECLARE_GLOBAL_DATA_PTR +#undef XTRN_DECLARE_GLOBAL_DATA_PTR +#define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */ +DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_GD_ADDR); +#else +DECLARE_GLOBAL_DATA_PTR; +#endif + +/* + * sjg: IMO this code should be + * refactored to a single function, something like: + * + * void led_set_state(enum led_colour_t colour, int on); + */ +/************************************************************************ + * Coloured LED functionality + ************************************************************************ + * May be supplied by boards if desired + */ +inline void __coloured_LED_init(void) {} +void coloured_LED_init(void) + __attribute__((weak, alias("__coloured_LED_init"))); +inline void __red_led_on(void) {} +void red_led_on(void) __attribute__((weak, alias("__red_led_on"))); +inline void __red_led_off(void) {} +void red_led_off(void) __attribute__((weak, alias("__red_led_off"))); +inline void __green_led_on(void) {} +void green_led_on(void) __attribute__((weak, alias("__green_led_on"))); +inline void __green_led_off(void) {} +void green_led_off(void) __attribute__((weak, alias("__green_led_off"))); +inline void __yellow_led_on(void) {} +void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on"))); +inline void __yellow_led_off(void) {} +void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off"))); +inline void __blue_led_on(void) {} +void blue_led_on(void) __attribute__((weak, alias("__blue_led_on"))); +inline void __blue_led_off(void) {} +void blue_led_off(void) __attribute__((weak, alias("__blue_led_off"))); + +/* + * Why is gd allocated a register? Prior to reloc it might be better to + * just pass it around to each function in this file? + * + * After reloc one could argue that it is hardly used and doesn't need + * to be in a register. Or if it is it should perhaps hold pointers to all + * global data for all modules, so that post-reloc we can avoid the massive + * literal pool we get on ARM. Or perhaps just encourage each module to use + * a structure... + */ + +/* + * Could the CONFIG_SPL_BUILD infection become a flag in gd? + */ + +#if defined(CONFIG_WATCHDOG) +static int init_func_watchdog_init(void) +{ + puts(" Watchdog enabled\n"); + WATCHDOG_RESET(); + + return 0; +} + +int init_func_watchdog_reset(void) +{ + WATCHDOG_RESET(); + + return 0; +} +#endif /* CONFIG_WATCHDOG */ + +void __board_add_ram_info(int use_default) +{ + /* please define platform specific board_add_ram_info() */ +} + +void board_add_ram_info(int) + __attribute__ ((weak, alias("__board_add_ram_info"))); + +static int init_baud_rate(void) +{ + gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); + return 0; +} + +static int display_text_info(void) +{ + ulong bss_start, bss_end; + +#ifdef CONFIG_SYS_SYM_OFFSETS + bss_start = _bss_start_ofs + _TEXT_BASE; + bss_end = _bss_end_ofs + _TEXT_BASE; +#else + bss_start = (ulong)&__bss_start; + bss_end = (ulong)&__bss_end; +#endif + debug("U-Boot code: %08X -> %08lX BSS: -> %08lX\n", + CONFIG_SYS_TEXT_BASE, bss_start, bss_end); + +#ifdef CONFIG_MODEM_SUPPORT + debug("Modem Support enabled\n"); +#endif +#ifdef CONFIG_USE_IRQ + debug("IRQ Stack: %08lx\n", IRQ_STACK_START); + debug("FIQ Stack: %08lx\n", FIQ_STACK_START); +#endif + + return 0; +} + +static int announce_dram_init(void) +{ + puts("DRAM: "); + return 0; +} + +#ifdef CONFIG_PPC +static int init_func_ram(void) +{ +#ifdef CONFIG_BOARD_TYPES + int board_type = gd->board_type; +#else + int board_type = 0; /* use dummy arg */ +#endif + + gd->ram_size = initdram(board_type); + + if (gd->ram_size > 0) + return 0; + + puts("*** failed ***\n"); + return 1; +} +#endif + +static int show_dram_config(void) +{ + ulong size; + +#ifdef CONFIG_NR_DRAM_BANKS + int i; + + debug("\nRAM Configuration:\n"); + for (i = size = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + size += gd->bd->bi_dram[i].size; + debug("Bank #%d: %08lx ", i, gd->bd->bi_dram[i].start); +#ifdef DEBUG + print_size(gd->bd->bi_dram[i].size, "\n"); +#endif + } + debug("\nDRAM: "); +#else + size = gd->ram_size; +#endif + + print_size(size, ""); + board_add_ram_info(0); + putc('\n'); + + return 0; +} + +ulong get_effective_memsize(void) +{ +#ifndef CONFIG_VERY_BIG_RAM + return gd->ram_size; +#else + /* limit stack to what we can reasonable map */ + return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ? + CONFIG_MAX_MEM_MAPPED : gd->ram_size); +#endif +} + +void __dram_init_banksize(void) +{ +#if defined(CONFIG_NR_DRAM_BANKS) && defined(CONFIG_SYS_SDRAM_BASE) + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = get_effective_memsize(); +#endif +} + +void dram_init_banksize(void) + __attribute__((weak, alias("__dram_init_banksize"))); + +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) +static int init_func_i2c(void) +{ + puts("I2C: "); + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + puts("ready\n"); + return 0; +} +#endif + +#if defined(CONFIG_HARD_SPI) +static int init_func_spi(void) +{ + puts("SPI: "); + spi_init(); + puts("ready\n"); + return 0; +} +#endif + +__maybe_unused +static int zero_global_data(void) +{ + memset((void *)gd, '\0', sizeof(gd_t)); + + return 0; +} + +static int setup_mon_len(void) +{ +#ifdef CONFIG_SYS_SYM_OFFSETS + gd->mon_len = _bss_end_ofs; +#else + /* TODO: use (ulong)&__bss_end - (ulong)&__text_start; ? */ + gd->mon_len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE; +#endif + return 0; +} + +__weak int arch_cpu_init(void) +{ + return 0; +} + +static int setup_fdt(void) +{ +#ifdef CONFIG_OF_EMBED + /* Get a pointer to the FDT */ + gd->fdt_blob = _binary_dt_dtb_start; +#elif defined CONFIG_OF_SEPARATE + /* FDT is at end of image */ +# ifdef CONFIG_SYS_SYM_OFFSETS + gd->fdt_blob = (void *)(_end_ofs + CONFIG_SYS_TEXT_BASE); +# else + gd->fdt_blob = (ulong *)&_end; +# endif +#endif + /* Allow the early environment to override the fdt address */ + gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16, + (uintptr_t)gd->fdt_blob); + return 0; +} + +/* Get the top of usable RAM */ +__weak ulong board_get_usable_ram_top(ulong total_size) +{ + return gd->ram_top; +} + +static int setup_dest_addr(void) +{ + debug("Monitor len: %08lX\n", gd->mon_len); + /* + * Ram is setup, size stored in gd !! + */ + debug("Ram size: %08lX\n", (ulong)gd->ram_size); +#if defined(CONFIG_SYS_MEM_TOP_HIDE) + /* + * Subtract specified amount of memory to hide so that it won't + * get "touched" at all by U-Boot. By fixing up gd->ram_size + * the Linux kernel should now get passed the now "corrected" + * memory size and won't touch it either. This should work + * for arch/ppc and arch/powerpc. Only Linux board ports in + * arch/powerpc with bootwrapper support, that recalculate the + * memory size from the SDRAM controller setup will have to + * get fixed. + */ + gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE; +#endif +#ifdef CONFIG_SYS_SDRAM_BASE + gd->ram_top = CONFIG_SYS_SDRAM_BASE; +#endif + gd->ram_top += get_effective_memsize(); + gd->ram_top = board_get_usable_ram_top(gd->mon_len); + gd->dest_addr = gd->ram_top; + debug("Ram top: %08lX\n", (ulong)gd->ram_top); +#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500)) + /* + * We need to make sure the location we intend to put secondary core + * boot code is reserved and not used by any part of u-boot + */ + if (gd->dest_addr > determine_mp_bootpg(NULL)) { + gd->dest_addr = determine_mp_bootpg(NULL); + debug("Reserving MP boot page to %08lx\n", gd->dest_addr); + } +#endif + gd->dest_addr_sp = gd->dest_addr; + return 0; +} + +#if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR) +static int reserve_logbuffer(void) +{ + /* reserve kernel log buffer */ + gd->dest_addr -= LOGBUFF_RESERVE; + debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, + gd->dest_addr); + return 0; +} +#endif + +#ifdef CONFIG_PRAM +/* reserve protected RAM */ +static int reserve_pram(void) +{ + ulong reg; + + reg = getenv_ulong("pram", 10, CONFIG_PRAM); + gd->dest_addr -= (reg << 10); /* size is in kB */ + debug("Reserving %ldk for protected RAM at %08lx\n", reg, + gd->dest_addr); + return 0; +} +#endif /* CONFIG_PRAM */ + +/* Round memory pointer down to next 4 kB limit */ +static int reserve_round_4k(void) +{ + gd->dest_addr &= ~(4096 - 1); + return 0; +} + +#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) && \ + defined(CONFIG_ARM) +static int reserve_mmu(void) +{ + /* reserve TLB table */ + gd->arch.tlb_size = 4096 * 4; + gd->dest_addr -= gd->arch.tlb_size; + + /* round down to next 64 kB limit */ + gd->dest_addr &= ~(0x10000 - 1); + + gd->arch.tlb_addr = gd->dest_addr; + debug("TLB table from %08lx to %08lx\n", gd->arch.tlb_addr, + gd->arch.tlb_addr + gd->arch.tlb_size); + return 0; +} +#endif + +#ifdef CONFIG_LCD +static int reserve_lcd(void) +{ +#ifdef CONFIG_FB_ADDR + gd->fb_base = CONFIG_FB_ADDR; +#else + /* reserve memory for LCD display (always full pages) */ + gd->dest_addr = lcd_setmem(gd->dest_addr); + gd->fb_base = gd->dest_addr; +#endif /* CONFIG_FB_ADDR */ + return 0; +} +#endif /* CONFIG_LCD */ + +#if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) \ + && !defined(CONFIG_ARM) && !defined(CONFIG_X86) +static int reserve_video(void) +{ + /* reserve memory for video display (always full pages) */ + gd->dest_addr = video_setmem(gd->dest_addr); + gd->fb_base = gd->dest_addr; + + return 0; +} +#endif + +static int reserve_uboot(void) +{ + /* + * reserve memory for U-Boot code, data & bss + * round down to next 4 kB limit + */ + gd->dest_addr -= gd->mon_len; + gd->dest_addr &= ~(4096 - 1); +#ifdef CONFIG_E500 + /* round down to next 64 kB limit so that IVPR stays aligned */ + gd->dest_addr &= ~(65536 - 1); +#endif + + debug("Reserving %ldk for U-Boot at: %08lx\n", gd->mon_len >> 10, + gd->dest_addr); + return 0; +} + +#ifndef CONFIG_SPL_BUILD +/* reserve memory for malloc() area */ +static int reserve_malloc(void) +{ + gd->dest_addr_sp = gd->dest_addr - TOTAL_MALLOC_LEN; + debug("Reserving %dk for malloc() at: %08lx\n", + TOTAL_MALLOC_LEN >> 10, gd->dest_addr_sp); + return 0; +} + +/* (permanently) allocate a Board Info struct */ +static int reserve_board(void) +{ + gd->dest_addr_sp -= sizeof(bd_t); + gd->bd = (bd_t *)gd->dest_addr_sp; + memset(gd->bd, '\0', sizeof(bd_t)); + debug("Reserving %zu Bytes for Board Info at: %08lx\n", + sizeof(bd_t), gd->dest_addr_sp); + return 0; +} +#endif + +static int setup_machine(void) +{ +#ifdef CONFIG_MACH_TYPE + gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */ +#endif + return 0; +} + +static int reserve_global_data(void) +{ + gd->dest_addr_sp -= sizeof(gd_t); + gd->new_gd = (gd_t *)gd->dest_addr_sp; + debug("Reserving %zu Bytes for Global Data at: %08lx\n", + sizeof(gd_t), gd->dest_addr_sp); + return 0; +} + +static int reserve_fdt(void) +{ + /* + * If the device tree is sitting immediate above our image then we + * must relocate it. If it is embedded in the data section, then it + * will be relocated with other data. + */ + if (gd->fdt_blob) { + gd->fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32); + + gd->dest_addr_sp -= gd->fdt_size; + gd->new_fdt = (void *)gd->dest_addr_sp; + debug("Reserving %lu Bytes for FDT at: %p\n", + gd->fdt_size, gd->new_fdt); + } + + return 0; +} + +static int reserve_stacks(void) +{ +#ifdef CONFIG_SPL_BUILD +# ifdef CONFIG_ARM + gd->dest_addr_sp -= 128; /* leave 32 words for abort-stack */ + gd->irq_sp = gd->dest_addr_sp; +# endif +#else +# ifdef CONFIG_PPC + ulong *s; +# endif + + /* setup stack pointer for exceptions */ + gd->dest_addr_sp -= 16; + gd->dest_addr_sp &= ~0xf; + gd->irq_sp = gd->dest_addr_sp; + + /* + * Handle architecture-specific things here + * TODO(sjg@chromium.org): Perhaps create arch_reserve_stack() + * to handle this and put in arch/xxx/lib/stack.c + */ +# ifdef CONFIG_ARM +# ifdef CONFIG_USE_IRQ + gd->dest_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ); + debug("Reserving %zu Bytes for IRQ stack at: %08lx\n", + CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ, gd->dest_addr_sp); + + /* 8-byte alignment for ARM ABI compliance */ + gd->dest_addr_sp &= ~0x07; +# endif + /* leave 3 words for abort-stack, plus 1 for alignment */ + gd->dest_addr_sp -= 16; +# elif defined(CONFIG_PPC) + /* Clear initial stack frame */ + s = (ulong *) gd->dest_addr_sp; + *s = 0; /* Terminate back chain */ + *++s = 0; /* NULL return address */ +# endif /* Architecture specific code */ + + return 0; +#endif +} + +static int display_new_sp(void) +{ + debug("New Stack Pointer is: %08lx\n", gd->dest_addr_sp); + + return 0; +} + +#ifdef CONFIG_PPC +static int setup_board_part1(void) +{ + bd_t *bd = gd->bd; + + /* + * Save local variables to board info struct + */ + + bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of memory */ + bd->bi_memsize = gd->ram_size; /* size in bytes */ + +#ifdef CONFIG_SYS_SRAM_BASE + bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM */ + bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM */ +#endif + +#if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \ + defined(CONFIG_E500) || defined(CONFIG_MPC86xx) + bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ +#endif +#if defined(CONFIG_MPC5xxx) + bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ +#endif +#if defined(CONFIG_MPC83xx) + bd->bi_immrbar = CONFIG_SYS_IMMR; +#endif +#if defined(CONFIG_MPC8220) + bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ + bd->bi_inpfreq = gd->arch.inp_clk; + bd->bi_pcifreq = gd->pci_clk; + bd->bi_vcofreq = gd->arch.vco_clk; + bd->bi_pevfreq = gd->arch.pev_clk; + bd->bi_flbfreq = gd->arch.flb_clk; + + /* store bootparam to sram (backward compatible), here? */ + { + u32 *sram = (u32 *) CONFIG_SYS_SRAM_BASE; + + *sram++ = gd->ram_size; + *sram++ = gd->bus_clk; + *sram++ = gd->arch.inp_clk; + *sram++ = gd->cpu_clk; + *sram++ = gd->arch.vco_clk; + *sram++ = gd->arch.flb_clk; + *sram++ = 0xb8c3ba11; /* boot signature */ + } +#endif + + return 0; +} + +static int setup_board_part2(void) +{ + bd_t *bd = gd->bd; + + bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ + bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ +#if defined(CONFIG_CPM2) + bd->bi_cpmfreq = gd->arch.cpm_clk; + bd->bi_brgfreq = gd->arch.brg_clk; + bd->bi_sccfreq = gd->arch.scc_clk; + bd->bi_vco = gd->arch.vco_out; +#endif /* CONFIG_CPM2 */ +#if defined(CONFIG_MPC512X) + bd->bi_ipsfreq = gd->arch.ips_clk; +#endif /* CONFIG_MPC512X */ +#if defined(CONFIG_MPC5xxx) + bd->bi_ipbfreq = gd->arch.ipb_clk; + bd->bi_pcifreq = gd->pci_clk; +#endif /* CONFIG_MPC5xxx */ + + return 0; +} +#endif + +#ifdef CONFIG_SYS_EXTBDINFO +static int setup_board_extra(void) +{ + bd_t *bd = gd->bd; + + strncpy((char *) bd->bi_s_version, "1.2", sizeof(bd->bi_s_version)); + strncpy((char *) bd->bi_r_version, U_BOOT_VERSION, + sizeof(bd->bi_r_version)); + + bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */ + bd->bi_plb_busfreq = gd->bus_clk; +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + bd->bi_pci_busfreq = get_PCI_freq(); + bd->bi_opbfreq = get_OPB_freq(); +#elif defined(CONFIG_XILINX_405) + bd->bi_pci_busfreq = get_PCI_freq(); +#endif + + return 0; +} +#endif + +#ifdef CONFIG_POST +static int init_post(void) +{ + post_bootmode_init(); + post_run(NULL, POST_ROM | post_bootmode_get(0)); + + return 0; +} +#endif + +static int setup_baud_rate(void) +{ + /* Ick, can we get rid of this line? */ + gd->bd->bi_baudrate = gd->baudrate; + + return 0; +} + +static int setup_dram_config(void) +{ + /* Ram is board specific, so move it to board code ... */ + dram_init_banksize(); + + return 0; +} + +static int reloc_fdt(void) +{ + if (gd->new_fdt) { + memcpy(gd->new_fdt, gd->fdt_blob, gd->fdt_size); + gd->fdt_blob = gd->new_fdt; + } + + return 0; +} + +static int setup_reloc(void) +{ + gd->relocaddr = gd->dest_addr; + gd->start_addr_sp = gd->dest_addr_sp; + gd->reloc_off = gd->dest_addr - CONFIG_SYS_TEXT_BASE; + memcpy(gd->new_gd, (char *)gd, sizeof(gd_t)); + + debug("Relocation Offset is: %08lx\n", gd->reloc_off); + debug("Relocating to %08lx, new gd at %p, sp at %08lx\n", + gd->dest_addr, gd->new_gd, gd->dest_addr_sp); + + return 0; +} + +/* ARM calls relocate_code from its crt0.S */ +#if !defined(CONFIG_ARM) + +static int jump_to_copy(void) +{ + /* + * x86 is special, but in a nice way. It uses a trampoline which + * enables the dcache if possible. + * + * For now, other archs use relocate_code(), which is implemented + * similarly for all archs. When we do generic relocation, hopefully + * we can make all archs enable the dcache prior to relocation. + */ +#ifdef CONFIG_X86 + /* + * SDRAM and console are now initialised. The final stack can now + * be setup in SDRAM. Code execution will continue in Flash, but + * with the stack in SDRAM and Global Data in temporary memory + * (CPU cache) + */ + board_init_f_r_trampoline(gd->start_addr_sp); +#else + relocate_code(gd->dest_addr_sp, gd->new_gd, gd->dest_addr); +#endif + + return 0; +} +#endif + +/* Record the board_init_f() bootstage (after arch_cpu_init()) */ +static int mark_bootstage(void) +{ + bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f"); + + return 0; +} + +static init_fnc_t init_sequence_f[] = { +#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \ + !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \ + !defined(CONFIG_MPC86xx) + zero_global_data, +#endif + setup_fdt, + setup_mon_len, +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) + /* TODO: can this go into arch_cpu_init()? */ + probecpu, +#endif + arch_cpu_init, /* basic arch cpu dependent setup */ +#ifdef CONFIG_X86 + cpu_init_f, /* TODO(sjg@chromium.org): remove */ +# ifdef CONFIG_OF_CONTROL + find_fdt, /* TODO(sjg@chromium.org): remove */ +# endif +#endif + mark_bootstage, +#ifdef CONFIG_OF_CONTROL + fdtdec_check_fdt, +#endif +#if defined(CONFIG_BOARD_EARLY_INIT_F) + board_early_init_f, +#endif + /* TODO: can any of this go into arch_cpu_init()? */ +#if defined(CONFIG_PPC) && !defined(CONFIG_8xx_CPUCLK_DEFAULT) + get_clocks, /* get CPU and bus clocks (etc.) */ +#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \ + && !defined(CONFIG_TQM885D) + adjust_sdram_tbs_8xx, +#endif + /* TODO: can we rename this to timer_init()? */ + init_timebase, +#endif +#if defined(CONFIG_BOARD_EARLY_INIT_F) + board_early_init_f, +#endif +#ifdef CONFIG_ARM + timer_init, /* initialize timer */ +#endif +#ifdef CONFIG_BOARD_POSTCLK_INIT + board_postclk_init, +#endif +#ifdef CONFIG_FSL_ESDHC + get_clocks, +#endif +#ifdef CONFIG_SYS_ALLOC_DPRAM +#if !defined(CONFIG_CPM2) + dpram_init, +#endif +#endif +#if defined(CONFIG_BOARD_POSTCLK_INIT) + board_postclk_init, +#endif + env_init, /* initialize environment */ +#if defined(CONFIG_8xx_CPUCLK_DEFAULT) + /* get CPU and bus clocks according to the environment variable */ + get_clocks_866, + /* adjust sdram refresh rate according to the new clock */ + sdram_adjust_866, + init_timebase, +#endif + init_baud_rate, /* initialze baudrate settings */ + serial_init, /* serial communications setup */ + console_init_f, /* stage 1 init of console */ +#if defined(CONFIG_X86) && defined(CONFIG_OF_CONTROL) + prepare_fdt, /* TODO(sjg@chromium.org): remove */ +#endif + display_options, /* say that we are here */ + display_text_info, /* show debugging info if required */ +#if defined(CONFIG_8260) + prt_8260_rsr, + prt_8260_clks, +#endif /* CONFIG_8260 */ +#if defined(CONFIG_MPC83xx) + prt_83xx_rsr, +#endif +#ifdef CONFIG_PPC + checkcpu, +#endif +#if defined(CONFIG_DISPLAY_CPUINFO) + print_cpuinfo, /* display cpu info (and speed) */ +#endif +#if defined(CONFIG_MPC5xxx) + prt_mpc5xxx_clks, +#endif /* CONFIG_MPC5xxx */ +#if defined(CONFIG_MPC8220) + prt_mpc8220_clks, +#endif +#if defined(CONFIG_DISPLAY_BOARDINFO) + checkboard, /* display board info */ +#endif + INIT_FUNC_WATCHDOG_INIT +#if defined(CONFIG_MISC_INIT_F) + misc_init_f, +#endif + INIT_FUNC_WATCHDOG_RESET +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) + init_func_i2c, +#endif +#if defined(CONFIG_HARD_SPI) + init_func_spi, +#endif +#ifdef CONFIG_X86 + dram_init_f, /* configure available RAM banks */ + /* x86 would prefer that this happens after relocation */ + dram_init, +#endif + announce_dram_init, + /* TODO: unify all these dram functions? */ +#ifdef CONFIG_ARM + dram_init, /* configure available RAM banks */ +#endif +#ifdef CONFIG_PPC + init_func_ram, +#endif +#ifdef CONFIG_POST + post_init_f, +#endif + INIT_FUNC_WATCHDOG_RESET +#if defined(CONFIG_SYS_DRAM_TEST) + testdram, +#endif /* CONFIG_SYS_DRAM_TEST */ + INIT_FUNC_WATCHDOG_RESET + +#ifdef CONFIG_POST + init_post, +#endif + INIT_FUNC_WATCHDOG_RESET + /* + * Now that we have DRAM mapped and working, we can + * relocate the code and continue running from DRAM. + * + * Reserve memory at end of RAM for (top down in that order): + * - area that won't get touched by U-Boot and Linux (optional) + * - kernel log buffer + * - protected RAM + * - LCD framebuffer + * - monitor code + * - board info struct + */ + setup_dest_addr, +#if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR) + reserve_logbuffer, +#endif +#ifdef CONFIG_PRAM + reserve_pram, +#endif + reserve_round_4k, +#if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) && \ + defined(CONFIG_ARM) + reserve_mmu, +#endif +#ifdef CONFIG_LCD + reserve_lcd, +#endif + /* TODO: Why the dependency on CONFIG_8xx? */ +#if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) \ + && !defined(CONFIG_ARM) && !defined(CONFIG_X86) + reserve_video, +#endif + reserve_uboot, +#ifndef CONFIG_SPL_BUILD + reserve_malloc, + reserve_board, +#endif + setup_machine, + reserve_global_data, + reserve_fdt, + reserve_stacks, + setup_dram_config, + show_dram_config, +#ifdef CONFIG_PPC + setup_board_part1, + INIT_FUNC_WATCHDOG_RESET + setup_board_part2, +#endif + setup_baud_rate, + display_new_sp, +#ifdef CONFIG_SYS_EXTBDINFO + setup_board_extra, +#endif + INIT_FUNC_WATCHDOG_RESET + reloc_fdt, + setup_reloc, +#ifndef CONFIG_ARM + jump_to_copy, +#endif + NULL, +}; + +void board_init_f(ulong boot_flags) +{ +#ifndef CONFIG_X86 + gd_t data; + + gd = &data; +#endif + + gd->flags = boot_flags; + + if (initcall_run_list(init_sequence_f)) + hang(); + +#ifndef CONFIG_ARM + /* NOTREACHED - jump_to_copy() does not return */ + hang(); +#endif +} + +#ifdef CONFIG_X86 +/* + * For now this code is only used on x86. + * + * init_sequence_f_r is the list of init functions which are run when + * U-Boot is executing from Flash with a semi-limited 'C' environment. + * The following limitations must be considered when implementing an + * '_f_r' function: + * - 'static' variables are read-only + * - Global Data (gd->xxx) is read/write + * + * The '_f_r' sequence must, as a minimum, copy U-Boot to RAM (if + * supported). It _should_, if possible, copy global data to RAM and + * initialise the CPU caches (to speed up the relocation process) + * + * NOTE: At present only x86 uses this route, but it is intended that + * all archs will move to this when generic relocation is implemented. + */ +static init_fnc_t init_sequence_f_r[] = { + init_cache_f_r, + copy_uboot_to_ram, + clear_bss, + do_elf_reloc_fixups, + + NULL, +}; + +void board_init_f_r(void) +{ + if (initcall_run_list(init_sequence_f_r)) + hang(); + + /* + * U-Boot has been copied into SDRAM, the BSS has been cleared etc. + * Transfer execution from Flash to RAM by calculating the address + * of the in-RAM copy of board_init_r() and calling it + */ + (board_init_r + gd->reloc_off)(gd, gd->relocaddr); + + /* NOTREACHED - board_init_r() does not return */ + hang(); +} +#endif /* CONFIG_X86 */ + +void hang(void) +{ + puts("### ERROR ### Please RESET the board ###\n"); + for (;;); +} diff --git a/common/board_r.c b/common/board_r.c new file mode 100644 index 0000000000..9605f80a0c --- /dev/null +++ b/common/board_r.c @@ -0,0 +1,917 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * (C) Copyright 2002-2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +/* TODO: can we just include all these headers whether needed or not? */ +#if defined(CONFIG_CMD_BEDBUG) +#include <bedbug/type.h> +#endif +#ifdef CONFIG_HAS_DATAFLASH +#include <dataflash.h> +#endif +#include <environment.h> +#include <fdtdec.h> +#if defined(CONFIG_CMD_IDE) +#include <ide.h> +#endif +#include <initcall.h> +#ifdef CONFIG_PS2KBD +#include <keyboard.h> +#endif +#if defined(CONFIG_CMD_KGDB) +#include <kgdb.h> +#endif +#include <logbuff.h> +#include <malloc.h> +#ifdef CONFIG_BITBANGMII +#include <miiphy.h> +#endif +#include <mmc.h> +#include <nand.h> +#include <onenand_uboot.h> +#include <scsi.h> +#include <serial.h> +#include <spi.h> +#include <stdio_dev.h> +#include <watchdog.h> +#ifdef CONFIG_ADDR_MAP +#include <asm/mmu.h> +#endif +#include <asm/sections.h> +#ifdef CONFIG_X86 +#include <asm/init_helpers.h> +#endif +#include <linux/compiler.h> + +DECLARE_GLOBAL_DATA_PTR; + +ulong monitor_flash_len; + +int __board_flash_wp_on(void) +{ + /* + * Most flashes can't be detected when write protection is enabled, + * so provide a way to let U-Boot gracefully ignore write protected + * devices. + */ + return 0; +} + +int board_flash_wp_on(void) + __attribute__ ((weak, alias("__board_flash_wp_on"))); + +void __cpu_secondary_init_r(void) +{ +} + +void cpu_secondary_init_r(void) + __attribute__ ((weak, alias("__cpu_secondary_init_r"))); + +static int initr_secondary_cpu(void) +{ + /* + * after non-volatile devices & environment is setup and cpu code have + * another round to deal with any initialization that might require + * full access to the environment or loading of some image (firmware) + * from a non-volatile device + */ + /* TODO: maybe define this for all archs? */ + cpu_secondary_init_r(); + + return 0; +} + +static int initr_reloc(void) +{ + gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ + bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_R, "board_init_r"); + + return 0; +} + +#ifdef CONFIG_ARM +/* + * Some of these functions are needed purely because the functions they + * call return void. If we change them to return 0, these stubs can go away. + */ +static int initr_caches(void) +{ + /* Enable caches */ + enable_caches(); + return 0; +} +#endif + +__weak int fixup_cpu(void) +{ + return 0; +} + +static int initr_reloc_global_data(void) +{ +#ifdef CONFIG_SYS_SYM_OFFSETS + monitor_flash_len = _end_ofs; +#else + monitor_flash_len = (ulong)&__init_end - gd->dest_addr; +#endif +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) + /* + * The gd->cpu pointer is set to an address in flash before relocation. + * We need to update it to point to the same CPU entry in RAM. + * TODO: why not just add gd->reloc_ofs? + */ + gd->arch.cpu += gd->dest_addr - CONFIG_SYS_MONITOR_BASE; + + /* + * If we didn't know the cpu mask & # cores, we can save them of + * now rather than 'computing' them constantly + */ + fixup_cpu(); +#endif +#ifdef CONFIG_SYS_EXTRA_ENV_RELOC + /* + * Some systems need to relocate the env_addr pointer early because the + * location it points to will get invalidated before env_relocate is + * called. One example is on systems that might use a L2 or L3 cache + * in SRAM mode and initialize that cache from SRAM mode back to being + * a cache in cpu_init_r. + */ + gd->env_addr += gd->dest_addr - CONFIG_SYS_MONITOR_BASE; +#endif + return 0; +} + +static int initr_serial(void) +{ + serial_initialize(); + return 0; +} + +#ifdef CONFIG_PPC +static int initr_trap(void) +{ + /* + * Setup trap handlers + */ + trap_init(gd->dest_addr); + + return 0; +} +#endif + +#ifdef CONFIG_ADDR_MAP +static int initr_addr_map(void) +{ + init_addr_map(); + + return 0; +} +#endif + +#ifdef CONFIG_LOGBUFFER +unsigned long logbuffer_base(void) +{ + return gd->ram_top - LOGBUFF_LEN; +} + +static int initr_logbuffer(void) +{ + logbuff_init_ptrs(); + return 0; +} +#endif + +#ifdef CONFIG_POST +static int initr_post_backlog(void) +{ + post_output_backlog(); + return 0; +} +#endif + +#ifdef CONFIG_SYS_DELAYED_ICACHE +static int initr_icache_enable(void) +{ + return 0; +} +#endif + +#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500) +static int initr_unlock_ram_in_cache(void) +{ + unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */ + return 0; +} +#endif + +#ifdef CONFIG_PCI +static int initr_pci(void) +{ + pci_init(); + + return 0; +} +#endif + +#ifdef CONFIG_WINBOND_83C553 +static int initr_w83c553f(void) +{ + /* + * Initialise the ISA bridge + */ + initialise_w83c553f(); + return 0; +} +#endif + +static int initr_barrier(void) +{ +#ifdef CONFIG_PPC + /* TODO: Can we not use dmb() macros for this? */ + asm("sync ; isync"); +#endif + return 0; +} + +static int initr_malloc(void) +{ + ulong malloc_start; + + /* The malloc area is immediately below the monitor copy in DRAM */ + malloc_start = gd->dest_addr - TOTAL_MALLOC_LEN; + mem_malloc_init(malloc_start, TOTAL_MALLOC_LEN); + return 0; +} + +__weak int power_init_board(void) +{ + return 0; +} + +static int initr_announce(void) +{ + debug("Now running in RAM - U-Boot at: %08lx\n", gd->dest_addr); + return 0; +} + +#if !defined(CONFIG_SYS_NO_FLASH) +static int initr_flash(void) +{ + ulong flash_size = 0; + bd_t *bd = gd->bd; + int ok; + + puts("Flash: "); + + if (board_flash_wp_on()) { + printf("Uninitialized - Write Protect On\n"); + /* Since WP is on, we can't find real size. Set to 0 */ + ok = 1; + } else { + flash_size = flash_init(); + ok = flash_size > 0; + } + if (!ok) { + puts("*** failed ***\n"); +#ifdef CONFIG_PPC + /* Why does PPC do this? */ + hang(); +#endif + return -1; + } + print_size(flash_size, ""); +#ifdef CONFIG_SYS_FLASH_CHECKSUM + /* + * Compute and print flash CRC if flashchecksum is set to 'y' + * + * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX + */ + if (getenv_yesno("flashchecksum") == 1) { + printf(" CRC: %08X", crc32(0, + (const unsigned char *) CONFIG_SYS_FLASH_BASE, + flash_size)); + } +#endif /* CONFIG_SYS_FLASH_CHECKSUM */ + putc('\n'); + + /* update start of FLASH memory */ +#ifdef CONFIG_SYS_FLASH_BASE + bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; +#endif + /* size of FLASH memory (final value) */ + bd->bi_flashsize = flash_size; + +#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE) + /* Make a update of the Memctrl. */ + update_flash_size(flash_size); +#endif + + +#if defined(CONFIG_OXC) || defined(CONFIG_RMU) + /* flash mapped at end of memory map */ + bd->bi_flashoffset = CONFIG_SYS_TEXT_BASE + flash_size; +#elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE + bd->bi_flashoffset = monitor_flash_len; /* reserved area for monitor */ +#endif + return 0; +} +#endif + +#ifdef CONFIG_PPC +static int initr_spi(void) +{ + /* PPC does this here */ +#ifdef CONFIG_SPI +#if !defined(CONFIG_ENV_IS_IN_EEPROM) + spi_init_f(); +#endif + spi_init_r(); +#endif + return 0; +} +#endif + +#ifdef CONFIG_CMD_NAND +/* go init the NAND */ +int initr_nand(void) +{ + puts("NAND: "); + nand_init(); + return 0; +} +#endif + +#if defined(CONFIG_CMD_ONENAND) +/* go init the NAND */ +int initr_onenand(void) +{ + puts("NAND: "); + onenand_init(); + return 0; +} +#endif + +#ifdef CONFIG_GENERIC_MMC +int initr_mmc(void) +{ + puts("MMC: "); + mmc_initialize(gd->bd); + return 0; +} +#endif + +#ifdef CONFIG_HAS_DATAFLASH +int initr_dataflash(void) +{ + AT91F_DataflashInit(); + dataflash_print_info(); + return 0; +} +#endif + +/* + * Tell if it's OK to load the environment early in boot. + * + * If CONFIG_OF_CONFIG is defined, we'll check with the FDT to see + * if this is OK (defaulting to saying it's OK). + * + * NOTE: Loading the environment early can be a bad idea if security is + * important, since no verification is done on the environment. + * + * @return 0 if environment should not be loaded, !=0 if it is ok to load + */ +static int should_load_env(void) +{ +#ifdef CONFIG_OF_CONTROL + return fdtdec_get_config_int(gd->fdt_blob, "load-environment", 1); +#elif defined CONFIG_DELAY_ENVIRONMENT + return 0; +#else + return 1; +#endif +} + +static int initr_env(void) +{ + /* initialize environment */ + if (should_load_env()) + env_relocate(); + else + set_default_env(NULL); + + /* Initialize from environment */ + load_addr = getenv_ulong("loadaddr", 16, load_addr); +#if defined(CONFIG_SYS_EXTBDINFO) +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) +#if defined(CONFIG_I2CFAST) + /* + * set bi_iic_fast for linux taking environment variable + * "i2cfast" into account + */ + { + char *s = getenv("i2cfast"); + + if (s && ((*s == 'y') || (*s == 'Y'))) { + gd->bd->bi_iic_fast[0] = 1; + gd->bd->bi_iic_fast[1] = 1; + } + } +#endif /* CONFIG_I2CFAST */ +#endif /* CONFIG_405GP, CONFIG_405EP */ +#endif /* CONFIG_SYS_EXTBDINFO */ + return 0; +} + +#ifdef CONFIG_HERMES +static int initr_hermes(void) +{ + if ((gd->board_type >> 16) == 2) + gd->bd->bi_ethspeed = gd->board_type & 0xFFFF; + else + gd->bd->bi_ethspeed = 0xFFFF; + return 0; +} + +static int initr_hermes_start(void) +{ + if (gd->bd->bi_ethspeed != 0xFFFF) + hermes_start_lxt980((int) gd->bd->bi_ethspeed); + return 0; +} +#endif + +#ifdef CONFIG_SC3 +/* TODO: with new initcalls, move this into the driver */ +extern void sc3_read_eeprom(void); + +static int initr_sc3_read_eeprom(void) +{ + sc3_read_eeprom(); + return 0; +} +#endif + +static int initr_jumptable(void) +{ + jumptable_init(); + return 0; +} + +#if defined(CONFIG_API) +static int initr_api(void) +{ + /* Initialize API */ + api_init(); + return 0; +} +#endif + +#ifdef CONFIG_DISPLAY_BOARDINFO_LATE +static int show_model_r(void) +{ + /* Put this here so it appears on the LCD, now it is ready */ +# ifdef CONFIG_OF_CONTROL + const char *model; + + model = (char *)fdt_getprop(gd->fdt_blob, 0, "model", NULL); + printf("Model: %s\n", model ? model : "<unknown>"); +# else + checkboard(); +# endif +} +#endif + +/* enable exceptions */ +#ifdef CONFIG_ARM +static int initr_enable_interrupts(void) +{ + enable_interrupts(); + return 0; +} +#endif + +#ifdef CONFIG_CMD_NET +static int initr_ethaddr(void) +{ + bd_t *bd = gd->bd; + + /* kept around for legacy kernels only ... ignore the next section */ + eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr); +#ifdef CONFIG_HAS_ETH1 + eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr); +#endif +#ifdef CONFIG_HAS_ETH2 + eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr); +#endif +#ifdef CONFIG_HAS_ETH3 + eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr); +#endif +#ifdef CONFIG_HAS_ETH4 + eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr); +#endif +#ifdef CONFIG_HAS_ETH5 + eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr); +#endif + return 0; +} +#endif /* CONFIG_CMD_NET */ + +#ifdef CONFIG_CMD_KGDB +static int initr_kgdb(void) +{ + puts("KGDB: "); + kgdb_init(); + return 0; +} +#endif + +#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) +static int initr_status_led(void) +{ + status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING); + + return 0; +} +#endif + +#if defined(CONFIG_CMD_SCSI) +static int initr_scsi(void) +{ + /* Not supported properly on ARM yet */ +#ifndef CONFIG_ARM + puts("SCSI: "); + scsi_init(); +#endif + + return 0; +} +#endif /* CONFIG_CMD_NET */ + +#if defined(CONFIG_CMD_DOC) +static int initr_doc(void) +{ + puts("DOC: "); + doc_init(); +} +#endif + +#ifdef CONFIG_BITBANGMII +static int initr_bbmii(void) +{ + bb_miiphy_init(); + return 0; +} +#endif + +#ifdef CONFIG_CMD_NET +static int initr_net(void) +{ + puts("Net: "); + eth_initialize(gd->bd); +#if defined(CONFIG_RESET_PHY_R) + debug("Reset Ethernet PHY\n"); + reset_phy(); +#endif + return 0; +} +#endif + +#ifdef CONFIG_POST +static int initr_post(void) +{ + post_run(NULL, POST_RAM | post_bootmode_get(0)); + return 0; +} +#endif + +#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE) +static int initr_pcmcia(void) +{ + puts("PCMCIA:"); + pcmcia_init(); + return 0; +} +#endif + +#if defined(CONFIG_CMD_IDE) +static int initr_ide(void) +{ +#ifdef CONFIG_IDE_8xx_PCCARD + puts("PCMCIA:"); +#else + puts("IDE: "); +#endif +#if defined(CONFIG_START_IDE) + if (board_start_ide()) + ide_init(); +#else + ide_init(); +#endif + return 0; +} +#endif + +#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER) +/* + * Export available size of memory for Linux, taking into account the + * protected RAM at top of memory + */ +int initr_mem(void) +{ + ulong pram = 0; + char memsz[32]; + +# ifdef CONFIG_PRAM + pram = getenv_ulong("pram", 10, CONFIG_PRAM); +# endif +# if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR) + /* Also take the logbuffer into account (pram is in kB) */ + pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024; +# endif + sprintf(memsz, "%ldk", (gd->ram_size / 1024) - pram); + setenv("mem", memsz); + + return 0; +} +#endif + +#ifdef CONFIG_CMD_BEDBUG +static int initr_bedbug(void) +{ + bedbug_init(); + + return 0; +} +#endif + +#ifdef CONFIG_PS2KBD +static int initr_kbd(void) +{ + puts("PS/2: "); + kbd_init(); + return 0; +} +#endif + +#ifdef CONFIG_MODEM_SUPPORT +static int initr_modem(void) +{ + /* TODO: with new initcalls, move this into the driver */ + extern int do_mdm_init; + + do_mdm_init = gd->do_mdm_init; + return 0; +} +#endif + +static int run_main_loop(void) +{ + /* main_loop() can return to retry autoboot, if so just run it again */ + for (;;) + main_loop(); + return 0; +} + +/* + * Over time we hope to remove these functions with code fragments and + * stub funtcions, and instead call the relevant function directly. + * + * We also hope to remove most of the driver-related init and do it if/when + * the driver is later used. + * + * TODO: perhaps reset the watchdog in the initcall function after each call? + */ +init_fnc_t init_sequence_r[] = { + initr_reloc, + /* TODO: could x86/PPC have this also perhaps? */ +#ifdef CONFIG_ARM + initr_caches, + board_init, /* Setup chipselects */ +#endif + /* + * TODO: printing of the clock inforamtion of the board is now + * implemented as part of bdinfo command. Currently only support for + * davinci SOC's is added. Remove this check once all the board + * implement this. + */ +#ifdef CONFIG_CLOCKS + set_cpu_clk_info, /* Setup clock information */ +#endif +#ifdef CONFIG_X86 + init_bd_struct_r, +#endif + initr_reloc_global_data, + initr_serial, + initr_announce, + INIT_FUNC_WATCHDOG_RESET +#ifdef CONFIG_PPC + initr_trap, +#endif +#ifdef CONFIG_ADDR_MAP + initr_addr_map, +#endif +#if defined(CONFIG_BOARD_EARLY_INIT_R) + board_early_init_r, +#endif + INIT_FUNC_WATCHDOG_RESET +#ifdef CONFIG_LOGBUFFER + initr_logbuffer, +#endif +#ifdef CONFIG_POST + initr_post_backlog, +#endif + INIT_FUNC_WATCHDOG_RESET +#ifdef CONFIG_SYS_DELAYED_ICACHE + initr_icache_enable, +#endif +#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500) + initr_unlock_ram_in_cache, +#endif +#if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT) + /* + * Do early PCI configuration _before_ the flash gets initialised, + * because PCU ressources are crucial for flash access on some boards. + */ + initr_pci, +#endif +#ifdef CONFIG_WINBOND_83C553 + initr_w83c553f, +#endif + initr_barrier, + initr_malloc, +#ifdef CONFIG_ARCH_EARLY_INIT_R + arch_early_init_r, +#endif + power_init_board, +#ifndef CONFIG_SYS_NO_FLASH + initr_flash, +#endif + INIT_FUNC_WATCHDOG_RESET +#if defined(CONFIG_PPC) || defined(CONFIG_X86) + /* initialize higher level parts of CPU like time base and timers */ + cpu_init_r, +#endif +#ifdef CONFIG_PPC + initr_spi, +#endif +#if defined(CONFIG_X86) && defined(CONFIG_SPI) + init_func_spi, +#endif +#ifdef CONFIG_CMD_NAND + initr_nand, +#endif +#ifdef CONFIG_CMD_ONENAND + initr_onenand, +#endif +#ifdef CONFIG_GENERIC_MMC + initr_mmc, +#endif +#ifdef CONFIG_HAS_DATAFLASH + initr_dataflash, +#endif + initr_env, + INIT_FUNC_WATCHDOG_RESET + initr_secondary_cpu, +#ifdef CONFIG_SC3 + initr_sc3_read_eeprom, +#endif +#ifdef CONFIG_HERMES + initr_hermes, +#endif +#if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET) + mac_read_from_eeprom, +#endif + INIT_FUNC_WATCHDOG_RESET +#if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT) + /* + * Do pci configuration + */ + initr_pci, +#endif + stdio_init, + initr_jumptable, +#ifdef CONFIG_API + initr_api, +#endif + console_init_r, /* fully init console as a device */ +#ifdef CONFIG_DISPLAY_BOARDINFO_LATE + show_model_r, +#endif +#ifdef CONFIG_ARCH_MISC_INIT + arch_misc_init, /* miscellaneous arch-dependent init */ +#endif +#ifdef CONFIG_MISC_INIT_R + misc_init_r, /* miscellaneous platform-dependent init */ +#endif +#ifdef CONFIG_HERMES + initr_hermes_start, +#endif + INIT_FUNC_WATCHDOG_RESET +#ifdef CONFIG_CMD_KGDB + initr_kgdb, +#endif +#ifdef CONFIG_X86 + board_early_init_r, +#endif + interrupt_init, +#if defined(CONFIG_ARM) || defined(CONFIG_x86) + initr_enable_interrupts, +#endif +#ifdef CONFIG_X86 + timer_init, /* initialize timer */ +#endif +#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) + initr_status_led, +#endif + /* PPC has a udelay(20) here dating from 2002. Why? */ +#ifdef CONFIG_CMD_NET + initr_ethaddr, +#endif +#ifdef CONFIG_BOARD_LATE_INIT + board_late_init, +#endif +#ifdef CONFIG_CMD_SCSI + INIT_FUNC_WATCHDOG_RESET + initr_scsi, +#endif +#ifdef CONFIG_CMD_DOC + INIT_FUNC_WATCHDOG_RESET + initr_doc, +#endif +#ifdef CONFIG_BITBANGMII + initr_bbmii, +#endif +#ifdef CONFIG_CMD_NET + INIT_FUNC_WATCHDOG_RESET + initr_net, +#endif +#ifdef CONFIG_POST + initr_post, +#endif +#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE) + initr_pcmcia, +#endif +#if defined(CONFIG_CMD_IDE) + initr_ide, +#endif +#ifdef CONFIG_LAST_STAGE_INIT + INIT_FUNC_WATCHDOG_RESET + /* + * Some parts can be only initialized if all others (like + * Interrupts) are up and running (i.e. the PC-style ISA + * keyboard). + */ + last_stage_init, +#endif +#ifdef CONFIG_CMD_BEDBUG + INIT_FUNC_WATCHDOG_RESET + initr_bedbug, +#endif +#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER) + initr_mem, +#endif +#ifdef CONFIG_PS2KBD + initr_kbd, +#endif +#ifdef CONFIG_MODEM_SUPPORT + initr_modem, +#endif + run_main_loop, +}; + +void board_init_r(gd_t *new_gd, ulong dest_addr) +{ +#ifndef CONFIG_X86 + gd = new_gd; +#endif + if (initcall_run_list(init_sequence_r)) + hang(); + + /* NOTREACHED - run_main_loop() does not return */ + hang(); +} diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index f0338babeb..5d2ce0015a 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -79,10 +79,16 @@ static int image_info(unsigned long addr); #include <flash.h> #include <mtd/cfi_flash.h> extern flash_info_t flash_info[]; /* info for FLASH chips */ +#endif + +#if defined(CONFIG_CMD_IMLS) || defined(CONFIG_CMD_IMLS_NAND) static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); #endif -#ifdef CONFIG_SILENT_CONSOLE +#include <linux/err.h> +#include <nand.h> + +#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY) static void fixup_silent_linux(void); #endif @@ -446,9 +452,7 @@ static int bootm_start_standalone(ulong iflag, int argc, char * const argv[]) /* Don't start if "autostart" is set to "no" */ if (((s = getenv("autostart")) != NULL) && (strcmp(s, "no") == 0)) { - char buf[32]; - sprintf(buf, "%lX", images.os.image_len); - setenv("filesize", buf); + setenv_hex("filesize", images.os.image_len); return 0; } appl = (int (*)(int, char * const []))(ulong)ntohl(images.ep); @@ -523,17 +527,14 @@ static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc, case BOOTM_STATE_RAMDISK: { ulong rd_len = images.rd_end - images.rd_start; - char str[17]; ret = boot_ramdisk_high(&images.lmb, images.rd_start, rd_len, &images.initrd_start, &images.initrd_end); if (ret) return ret; - sprintf(str, "%lx", images.initrd_start); - setenv("initrd_start", str); - sprintf(str, "%lx", images.initrd_end); - setenv("initrd_end", str); + setenv_hex("initrd_start", images.initrd_start); + setenv_hex("initrd_end", images.initrd_end); } break; #endif @@ -693,7 +694,7 @@ int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) bootstage_mark(BOOTSTAGE_ID_CHECK_BOOT_OS); -#ifdef CONFIG_SILENT_CONSOLE +#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY) if (images.os.os == IH_OS_LINUX) fixup_silent_linux(); #endif @@ -1055,7 +1056,7 @@ static char bootm_help_text[] = "issued in the order below (it's ok to not issue all sub-commands):\n" "\tstart [addr [arg ...]]\n" "\tloados - load OS image\n" -#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_SPARC) +#if defined(CONFIG_SYS_BOOT_RAMDISK_HIGH) "\tramdisk - relocate initrd, set env initrd_start/initrd_end\n" #endif #if defined(CONFIG_OF_LIBFDT) @@ -1192,7 +1193,7 @@ U_BOOT_CMD( /* imls - list all images found in flash */ /*******************************************************************/ #if defined(CONFIG_CMD_IMLS) -static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_imls_nor(void) { flash_info_t *info; int i, j; @@ -1241,6 +1242,161 @@ next_sector: ; } next_bank: ; } + return 0; +} +#endif + +#if defined(CONFIG_CMD_IMLS_NAND) +static int nand_imls_legacyimage(nand_info_t *nand, int nand_dev, loff_t off, + size_t len) +{ + void *imgdata; + int ret; + + imgdata = malloc(len); + if (!imgdata) { + printf("May be a Legacy Image at NAND device %d offset %08llX:\n", + nand_dev, off); + printf(" Low memory(cannot allocate memory for image)\n"); + return -ENOMEM; + } + + ret = nand_read_skip_bad(nand, off, &len, + imgdata); + if (ret < 0 && ret != -EUCLEAN) { + free(imgdata); + return ret; + } + + if (!image_check_hcrc(imgdata)) { + free(imgdata); + return 0; + } + + printf("Legacy Image at NAND device %d offset %08llX:\n", + nand_dev, off); + image_print_contents(imgdata); + + puts(" Verifying Checksum ... "); + if (!image_check_dcrc(imgdata)) + puts("Bad Data CRC\n"); + else + puts("OK\n"); + + free(imgdata); + + return 0; +} + +static int nand_imls_fitimage(nand_info_t *nand, int nand_dev, loff_t off, + size_t len) +{ + void *imgdata; + int ret; + + imgdata = malloc(len); + if (!imgdata) { + printf("May be a FIT Image at NAND device %d offset %08llX:\n", + nand_dev, off); + printf(" Low memory(cannot allocate memory for image)\n"); + return -ENOMEM; + } + + ret = nand_read_skip_bad(nand, off, &len, + imgdata); + if (ret < 0 && ret != -EUCLEAN) { + free(imgdata); + return ret; + } + + if (!fit_check_format(imgdata)) { + free(imgdata); + return 0; + } + + printf("FIT Image at NAND device %d offset %08llX:\n", nand_dev, off); + + fit_print_contents(imgdata); + free(imgdata); + + return 0; +} + +static int do_imls_nand(void) +{ + nand_info_t *nand; + int nand_dev = nand_curr_device; + size_t len; + loff_t off; + u32 buffer[16]; + + if (nand_dev < 0 || nand_dev >= CONFIG_SYS_MAX_NAND_DEVICE) { + puts("\nNo NAND devices available\n"); + return -ENODEV; + } + + printf("\n"); + + for (nand_dev = 0; nand_dev < CONFIG_SYS_MAX_NAND_DEVICE; nand_dev++) { + nand = &nand_info[nand_dev]; + if (!nand->name || !nand->size) + continue; + + for (off = 0; off < nand->size; off += nand->erasesize) { + const image_header_t *header; + int ret; + + if (nand_block_isbad(nand, off)) + continue; + + len = sizeof(buffer); + + ret = nand_read(nand, off, &len, (u8 *)buffer); + if (ret < 0 && ret != -EUCLEAN) { + printf("NAND read error %d at offset %08llX\n", + ret, off); + continue; + } + + switch (genimg_get_format(buffer)) { + case IMAGE_FORMAT_LEGACY: + header = (const image_header_t *)buffer; + + len = image_get_image_size(header); + nand_imls_legacyimage(nand, nand_dev, off, len); + break; +#if defined(CONFIG_FIT) + case IMAGE_FORMAT_FIT: + len = fit_get_size(buffer); + nand_imls_fitimage(nand, nand_dev, off, len); + break; +#endif + } + } + } + + return 0; +} +#endif + +#if defined(CONFIG_CMD_IMLS) || defined(CONFIG_CMD_IMLS_NAND) +static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int ret_nor = 0, ret_nand = 0; + +#if defined(CONFIG_CMD_IMLS) + ret_nor = do_imls_nor(); +#endif + +#if defined(CONFIG_CMD_IMLS_NAND) + ret_nand = do_imls_nand(); +#endif + + if (ret_nor) + return ret_nor; + + if (ret_nand) + return ret_nand; return (0); } @@ -1249,15 +1405,15 @@ U_BOOT_CMD( imls, 1, 1, do_imls, "list all images found in flash", "\n" - " - Prints information about all images found at sector\n" - " boundaries in flash." + " - Prints information about all images found at sector/block\n" + " boundaries in nor/nand flash." ); #endif /*******************************************************************/ /* helper routines */ /*******************************************************************/ -#ifdef CONFIG_SILENT_CONSOLE +#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY) static void fixup_silent_linux(void) { char buf[256], *start, *end; @@ -1650,7 +1806,7 @@ static int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) usb_stop(); #endif -#ifdef CONFIG_SILENT_CONSOLE +#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY) fixup_silent_linux(); #endif arch_preboot_os(); diff --git a/common/cmd_cbfs.c b/common/cmd_cbfs.c index 3b6cfd879b..f51534b07e 100644 --- a/common/cmd_cbfs.c +++ b/common/cmd_cbfs.c @@ -65,7 +65,6 @@ int do_cbfs_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) const struct cbfs_cachenode *file; unsigned long offset; unsigned long count; - char buf[12]; long size; if (argc < 3) { @@ -95,8 +94,7 @@ int do_cbfs_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) printf("\n%ld bytes read\n", size); - sprintf(buf, "%lX", size); - setenv("filesize", buf); + setenv_hex("filesize", size); return 0; } diff --git a/common/cmd_cramfs.c b/common/cmd_cramfs.c index e7f496e4ea..0e43ab67c0 100644 --- a/common/cmd_cramfs.c +++ b/common/cmd_cramfs.c @@ -146,11 +146,9 @@ int do_cramfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) size = cramfs_load ((char *) offset, &part, filename); if (size > 0) { - char buf[10]; printf("### CRAMFS load complete: %d bytes loaded to 0x%lx\n", size, offset); - sprintf(buf, "%x", size); - setenv("filesize", buf); + setenv_hex("filesize", size); } else { printf("### CRAMFS LOAD ERROR<%x> for %s!\n", size, filename); } diff --git a/common/cmd_df.c b/common/cmd_df.c deleted file mode 100644 index f7e5df3e2d..0000000000 --- a/common/cmd_df.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * Command for accessing DataFlash. - * - * Copyright (C) 2008 Atmel Corporation - */ -#include <common.h> -#include <df.h> - -static int do_df(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - const char *cmd; - - /* need at least two arguments */ - if (argc < 2) - goto usage; - - cmd = argv[1]; - - if (strcmp(cmd, "init") == 0) { - df_init(0, 0, 1000000); - return 0; - } - - if (strcmp(cmd, "info") == 0) { - df_show_info(); - return 0; - } - -usage: - return CMD_RET_USAGE; -} - -U_BOOT_CMD( - sf, 2, 1, do_serial_flash, - "Serial flash sub-system", - "probe [bus:]cs - init flash device on given SPI bus and CS") diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c index 01d6b3a2d6..83ef32497a 100644 --- a/common/cmd_dfu.c +++ b/common/cmd_dfu.c @@ -50,12 +50,15 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (ret) return CMD_RET_FAILURE; - if (strcmp(argv[3], "list") == 0) { + if (argc > 3 && strcmp(argv[3], "list") == 0) { dfu_show_entities(); goto done; } +#ifdef CONFIG_TRATS board_usb_init(); +#endif + g_dnl_register(s); while (1) { if (ctrlc()) diff --git a/common/cmd_elf.c b/common/cmd_elf.c index a667a469b5..ab9c7e332d 100644 --- a/common/cmd_elf.c +++ b/common/cmd_elf.c @@ -198,7 +198,7 @@ int do_bootvx(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * defaults to 0x4200 */ tmp = getenv("bootaddr"); - if (tmp) + if (!tmp) bootaddr = CONFIG_SYS_VXWORKS_BOOT_ADDR; else bootaddr = simple_strtoul(tmp, NULL, 16); diff --git a/common/cmd_fat.c b/common/cmd_fat.c index 86be044725..0487438faa 100644 --- a/common/cmd_fat.c +++ b/common/cmd_fat.c @@ -49,6 +49,9 @@ U_BOOT_CMD( " If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n" " 'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n" " the load stops on end of file.\n" + " If either 'pos' or 'bytes' are not aligned to\n" + " ARCH_DMA_MINALIGN then a misaligned buffer warning will\n" + " be printed and performance will suffer for the load.\n" " All numeric parameters are assumed to be hex." ); diff --git a/common/cmd_fdos.c b/common/cmd_fdos.c index fbee8614ca..8ea1140e7f 100644 --- a/common/cmd_fdos.c +++ b/common/cmd_fdos.c @@ -40,7 +40,6 @@ int do_fdosboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) char *name; char *ep; int size; - char buf [12]; int drive = CONFIG_SYS_FDC_DRIVE_NUMBER; /* pre-set load_addr */ @@ -91,8 +90,7 @@ int do_fdosboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } flush_cache (load_addr, size); - sprintf(buf, "%x", size); - setenv("filesize", buf); + setenv_hex("filesize", size); printf("Floppy DOS load complete: %d bytes loaded to 0x%lx\n", size, load_addr); diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index 6eec947fcb..ac77a08b77 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -55,12 +55,8 @@ struct fdt_header *working_fdt; void set_working_fdt_addr(void *addr) { - char buf[17]; - working_fdt = addr; - - sprintf(buf, "%lx", (unsigned long)addr); - setenv("fdtaddr", buf); + setenv_addr("fdtaddr", addr); } /* @@ -347,10 +343,7 @@ static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } if (subcmd[0] == 's') { /* get the num nodes at this level */ - char buf[11]; - - sprintf(buf, "%d", curIndex + 1); - setenv(var, buf); + setenv_ulong(var, curIndex + 1); } else { /* node index not found */ printf("libfdt node not found\n"); diff --git a/common/cmd_gpt.c b/common/cmd_gpt.c index da7705da69..efd7934bd7 100644 --- a/common/cmd_gpt.c +++ b/common/cmd_gpt.c @@ -27,6 +27,7 @@ #include <part_efi.h> #include <exports.h> #include <linux/ctype.h> +#include <div64.h> #ifndef CONFIG_PARTITION_UUIDS #error CONFIG_PARTITION_UUIDS must be enabled for CONFIG_CMD_GPT to be enabled @@ -131,6 +132,7 @@ static int set_gpt_info(block_dev_desc_t *dev_desc, int p_count; disk_partition_t *parts; int errno = 0; + uint64_t size_ll, start_ll; debug("%s: MMC lba num: 0x%x %d\n", __func__, (unsigned int)dev_desc->lba, (unsigned int)dev_desc->lba); @@ -217,8 +219,8 @@ static int set_gpt_info(block_dev_desc_t *dev_desc, } if (extract_env(val, &p)) p = val; - parts[i].size = ustrtoul(p, &p, 0); - parts[i].size /= dev_desc->blksz; + size_ll = ustrtoull(p, &p, 0); + parts[i].size = lldiv(size_ll, dev_desc->blksz); free(val); /* start address */ @@ -226,8 +228,8 @@ static int set_gpt_info(block_dev_desc_t *dev_desc, if (val) { /* start address is optional */ if (extract_env(val, &p)) p = val; - parts[i].start = ustrtoul(p, &p, 0); - parts[i].start /= dev_desc->blksz; + start_ll = ustrtoull(p, &p, 0); + parts[i].start = lldiv(start_ll, dev_desc->blksz); free(val); } } diff --git a/common/cmd_hash.c b/common/cmd_hash.c index 689c608572..4fe0e78613 100644 --- a/common/cmd_hash.c +++ b/common/cmd_hash.c @@ -26,22 +26,30 @@ #include <common.h> #include <command.h> #include <hash.h> +#include <linux/ctype.h> static int do_hash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { + char *s; #ifdef CONFIG_HASH_VERIFY - int verify = 0; + int flags = HASH_FLAG_ENV; + if (argc < 4) + return CMD_RET_USAGE; if (!strcmp(argv[1], "-v")) { - verify = 1; + flags |= HASH_FLAG_VERIFY; argc--; argv++; } +#else + const int flags = HASH_FLAG_ENV; #endif /* Move forward to 'algorithm' parameter */ argc--; argv++; - return hash_command(*argv, verify, cmdtp, flag, argc - 1, argv + 1); + for (s = *argv; *s; s++) + *s = tolower(*s); + return hash_command(*argv, flags, cmdtp, flag, argc - 1, argv + 1); } #ifdef CONFIG_HASH_VERIFY diff --git a/common/cmd_help.c b/common/cmd_help.c index f832a96971..d9bdc4d17b 100644 --- a/common/cmd_help.c +++ b/common/cmd_help.c @@ -41,7 +41,7 @@ U_BOOT_CMD( ); /* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */ -ll_entry_declare(cmd_tbl_t, question_mark, cmd, cmd) = { +ll_entry_declare(cmd_tbl_t, question_mark, cmd) = { "?", CONFIG_SYS_MAXARGS, 1, do_help, "alias for 'help'", #ifdef CONFIG_SYS_LONGHELP diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c index 27296ddd7d..4a4a0000b4 100644 --- a/common/cmd_jffs2.c +++ b/common/cmd_jffs2.c @@ -525,11 +525,9 @@ int do_jffs2_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } if (size > 0) { - char buf[10]; printf("### %s load complete: %d bytes loaded to 0x%lx\n", fsname, size, offset); - sprintf(buf, "%x", size); - setenv("filesize", buf); + setenv_hex("filesize", size); } else { printf("### %s LOAD ERROR<%x> for %s!\n", fsname, size, filename); } diff --git a/common/cmd_led.c b/common/cmd_led.c index 7f5ab43c7f..84f79fae00 100644 --- a/common/cmd_led.c +++ b/common/cmd_led.c @@ -110,13 +110,15 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (led_commands[i].on) led_commands[i].on(); else - __led_set(led_commands[i].mask, 1); + __led_set(led_commands[i].mask, + STATUS_LED_ON); break; case LED_OFF: if (led_commands[i].off) led_commands[i].off(); else - __led_set(led_commands[i].mask, 0); + __led_set(led_commands[i].mask, + STATUS_LED_OFF); break; case LED_TOGGLE: if (led_commands[i].toggle) diff --git a/common/cmd_load.c b/common/cmd_load.c index 2c8dab1a0a..0832e92b17 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -149,7 +149,6 @@ static ulong load_serial(long offset) int type; /* return code for record type */ ulong addr; /* load address from S-Record */ ulong size; /* number of bytes transferred */ - char buf[32]; ulong store_addr; ulong start_addr = ~0; ulong end_addr = 0; @@ -198,8 +197,7 @@ static ulong load_serial(long offset) start_addr, end_addr, size, size ); flush_cache(start_addr, size); - sprintf(buf, "%lX", size); - setenv("filesize", buf); + setenv_hex("filesize", size); return (addr); case SREC_START: break; @@ -519,7 +517,6 @@ static int do_load_serial_bin(cmd_tbl_t *cmdtp, int flag, int argc, static ulong load_serial_bin(ulong offset) { int size, i; - char buf[32]; set_kerm_bin_mode((ulong *) offset); size = k_recv(); @@ -539,8 +536,7 @@ static ulong load_serial_bin(ulong offset) flush_cache(offset, size); printf("## Total Size = 0x%08x = %d Bytes\n", size, size); - sprintf(buf, "%X", size); - setenv("filesize", buf); + setenv_hex("filesize", size); return offset; } @@ -965,7 +961,6 @@ static int getcxmodem(void) { static ulong load_serial_ymodem(ulong offset) { int size; - char buf[32]; int err; int res; connection_info_t info; @@ -1012,8 +1007,7 @@ static ulong load_serial_ymodem(ulong offset) flush_cache(offset, size); printf("## Total Size = 0x%08x = %d Bytes\n", size, size); - sprintf(buf, "%X", size); - setenv("filesize", buf); + setenv_hex("filesize", size); return offset; } @@ -1064,8 +1058,8 @@ U_BOOT_CMD( " - save S-Record file over serial line with offset 'off' and size 'size'" ); #endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */ -#endif -#endif +#endif /* CONFIG_CMD_SAVES */ +#endif /* CONFIG_CMD_LOADS */ #if defined(CONFIG_CMD_LOADB) @@ -1085,7 +1079,7 @@ U_BOOT_CMD( " with offset 'off' and baudrate 'baud'" ); -#endif +#endif /* CONFIG_CMD_LOADB */ /* -------------------------------------------------------------------- */ @@ -1115,4 +1109,4 @@ U_BOOT_CMD( "[on|off]" ); -#endif +#endif /* CONFIG_CMD_HWFLOW */ diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 0f3ffc84ff..64dd76a0f5 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -32,11 +32,17 @@ #ifdef CONFIG_HAS_DATAFLASH #include <dataflash.h> #endif +#include <hash.h> #include <watchdog.h> +#include <asm/io.h> #include <linux/compiler.h> DECLARE_GLOBAL_DATA_PTR; +#ifndef CONFIG_SYS_MEMTEST_SCRATCH +#define CONFIG_SYS_MEMTEST_SCRATCH 0 +#endif + static int mod_mem(cmd_tbl_t *, int, int, int, char * const []); /* Display values from last command. @@ -138,9 +144,13 @@ static int do_mem_md(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) # endif { + ulong bytes = size * length; + const void *buf = map_sysmem(addr, bytes); + /* Print the lines. */ - print_buffer(addr, (void*)addr, size, length, DISP_LINE_LEN/size); - addr += size*length; + print_buffer(addr, buf, size, length, DISP_LINE_LEN / size); + addr += bytes; + unmap_sysmem(buf); } #endif @@ -163,6 +173,8 @@ static int do_mem_mw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr, writeval, count; int size; + void *buf; + ulong bytes; if ((argc < 3) || (argc > 4)) return CMD_RET_USAGE; @@ -188,15 +200,18 @@ static int do_mem_mw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) count = 1; } + bytes = size * count; + buf = map_sysmem(addr, bytes); while (count-- > 0) { if (size == 4) - *((ulong *)addr) = (ulong )writeval; + *((ulong *)buf) = (ulong)writeval; else if (size == 2) - *((ushort *)addr) = (ushort)writeval; + *((ushort *)buf) = (ushort)writeval; else - *((u_char *)addr) = (u_char)writeval; - addr += size; + *((u_char *)buf) = (u_char)writeval; + buf += size; } + unmap_sysmem(buf); return 0; } @@ -258,10 +273,11 @@ int do_mem_mwc ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) static int do_mem_cmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - ulong addr1, addr2, count, ngood; + ulong addr1, addr2, count, ngood, bytes; int size; int rcode = 0; const char *type; + const void *buf1, *buf2, *base; if (argc != 4) return CMD_RET_USAGE; @@ -294,33 +310,40 @@ static int do_mem_cmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif + bytes = size * count; + base = buf1 = map_sysmem(addr1, bytes); + buf2 = map_sysmem(addr2, bytes); for (ngood = 0; ngood < count; ++ngood) { ulong word1, word2; if (size == 4) { - word1 = *(ulong *)addr1; - word2 = *(ulong *)addr2; + word1 = *(ulong *)buf1; + word2 = *(ulong *)buf2; } else if (size == 2) { - word1 = *(ushort *)addr1; - word2 = *(ushort *)addr2; + word1 = *(ushort *)buf1; + word2 = *(ushort *)buf2; } else { - word1 = *(u_char *)addr1; - word2 = *(u_char *)addr2; + word1 = *(u_char *)buf1; + word2 = *(u_char *)buf2; } if (word1 != word2) { + ulong offset = buf1 - base; + printf("%s at 0x%08lx (%#0*lx) != %s at 0x%08lx (%#0*lx)\n", - type, addr1, size, word1, - type, addr2, size, word2); + type, (ulong)(addr1 + offset), size, word1, + type, (ulong)(addr2 + offset), size, word2); rcode = 1; break; } - addr1 += size; - addr2 += size; + buf1 += size; + buf2 += size; /* reset watchdog from time to time */ if ((ngood % (64 << 10)) == 0) WATCHDOG_RESET(); } + unmap_sysmem(buf1); + unmap_sysmem(buf2); printf("Total of %ld %s(s) were the same\n", ngood, type); return rcode; @@ -328,8 +351,10 @@ static int do_mem_cmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) static int do_mem_cp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - ulong addr, dest, count; + ulong addr, dest, count, bytes; int size; + const void *src; + void *buf; if (argc != 4) return CMD_RET_USAGE; @@ -419,15 +444,18 @@ static int do_mem_cp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif + bytes = size * count; + buf = map_sysmem(addr, bytes); + src = map_sysmem(addr, bytes); while (count-- > 0) { if (size == 4) - *((ulong *)dest) = *((ulong *)addr); + *((ulong *)buf) = *((ulong *)src); else if (size == 2) - *((ushort *)dest) = *((ushort *)addr); + *((ushort *)buf) = *((ushort *)src); else - *((u_char *)dest) = *((u_char *)addr); - addr += size; - dest += size; + *((u_char *)buf) = *((u_char *)src); + src += size; + buf += size; /* reset watchdog from time to time */ if ((count % (64 << 10)) == 0) @@ -453,16 +481,18 @@ static int do_mem_base(cmd_tbl_t *cmdtp, int flag, int argc, static int do_mem_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - ulong addr, length, i; + ulong addr, length, i, bytes; int size; volatile uint *longp; volatile ushort *shortp; volatile u_char *cp; + const void *buf; if (argc < 3) return CMD_RET_USAGE; - /* Check for a size spefication. + /* + * Check for a size specification. * Defaults to long if no or incorrect specification. */ if ((size = cmd_get_data_size(argv[0], 4)) < 0) @@ -476,28 +506,31 @@ static int do_mem_loop(cmd_tbl_t *cmdtp, int flag, int argc, */ length = simple_strtoul(argv[2], NULL, 16); + bytes = size * length; + buf = map_sysmem(addr, bytes); + /* We want to optimize the loops to run as fast as possible. * If we have only one object, just run infinite loops. */ if (length == 1) { if (size == 4) { - longp = (uint *)addr; + longp = (uint *)buf; for (;;) i = *longp; } if (size == 2) { - shortp = (ushort *)addr; + shortp = (ushort *)buf; for (;;) i = *shortp; } - cp = (u_char *)addr; + cp = (u_char *)buf; for (;;) i = *cp; } if (size == 4) { for (;;) { - longp = (uint *)addr; + longp = (uint *)buf; i = length; while (i-- > 0) *longp++; @@ -505,33 +538,36 @@ static int do_mem_loop(cmd_tbl_t *cmdtp, int flag, int argc, } if (size == 2) { for (;;) { - shortp = (ushort *)addr; + shortp = (ushort *)buf; i = length; while (i-- > 0) *shortp++; } } for (;;) { - cp = (u_char *)addr; + cp = (u_char *)buf; i = length; while (i-- > 0) *cp++; } + unmap_sysmem(buf); } #ifdef CONFIG_LOOPW int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - ulong addr, length, i, data; + ulong addr, length, i, data, bytes; int size; volatile uint *longp; volatile ushort *shortp; volatile u_char *cp; + void *buf; if (argc < 4) return CMD_RET_USAGE; - /* Check for a size spefication. + /* + * Check for a size specification. * Defaults to long if no or incorrect specification. */ if ((size = cmd_get_data_size(argv[0], 4)) < 0) @@ -548,28 +584,31 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /* data to write */ data = simple_strtoul(argv[3], NULL, 16); + bytes = size * length; + buf = map_sysmem(addr, bytes); + /* We want to optimize the loops to run as fast as possible. * If we have only one object, just run infinite loops. */ if (length == 1) { if (size == 4) { - longp = (uint *)addr; + longp = (uint *)buf; for (;;) *longp = data; } if (size == 2) { - shortp = (ushort *)addr; + shortp = (ushort *)buf; for (;;) *shortp = data; } - cp = (u_char *)addr; + cp = (u_char *)buf; for (;;) *cp = data; } if (size == 4) { for (;;) { - longp = (uint *)addr; + longp = (uint *)buf; i = length; while (i-- > 0) *longp++ = data; @@ -577,14 +616,14 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } if (size == 2) { for (;;) { - shortp = (ushort *)addr; + shortp = (ushort *)buf; i = length; while (i-- > 0) *shortp++ = data; } } for (;;) { - cp = (u_char *)addr; + cp = (u_char *)buf; i = length; while (i-- > 0) *cp++ = data; @@ -592,36 +631,20 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif /* CONFIG_LOOPW */ -/* - * Perform a memory test. A more complete alternative test can be - * configured using CONFIG_SYS_ALT_MEMTEST. The complete test loops until - * interrupted by ctrl-c or by a failure of one of the sub-tests. - */ -static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) +#ifdef CONFIG_CMD_MEMTEST +static ulong mem_test_alt(vu_long *buf, ulong start_addr, ulong end_addr, + vu_long *dummy) { - vu_long *addr, *start, *end; - ulong val; - ulong readback; - ulong errs = 0; - int iterations = 1; - int iteration_limit; - -#if defined(CONFIG_SYS_ALT_MEMTEST) - vu_long len; - vu_long offset; - vu_long test_offset; - vu_long pattern; - vu_long temp; - vu_long anti_pattern; - vu_long num_words; -#if defined(CONFIG_SYS_MEMTEST_SCRATCH) - vu_long *dummy = (vu_long*)CONFIG_SYS_MEMTEST_SCRATCH; -#else - vu_long *dummy = NULL; /* yes, this is address 0x0, not NULL */ -#endif - int j; - + vu_long *addr; + ulong errs = 0; + ulong val, readback; + int j; + vu_long offset; + vu_long test_offset; + vu_long pattern; + vu_long temp; + vu_long anti_pattern; + vu_long num_words; static const ulong bitpattern[] = { 0x00000001, /* single bit */ 0x00000003, /* two adjacent bits */ @@ -632,322 +655,355 @@ static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc, 0x00000055, /* four non-adjacent bits */ 0xaaaaaaaa, /* alternating 1/0 */ }; -#else - ulong incr; - ulong pattern; -#endif - - if (argc > 1) - start = (ulong *)simple_strtoul(argv[1], NULL, 16); - else - start = (ulong *)CONFIG_SYS_MEMTEST_START; - if (argc > 2) - end = (ulong *)simple_strtoul(argv[2], NULL, 16); - else - end = (ulong *)(CONFIG_SYS_MEMTEST_END); - - if (argc > 3) - pattern = (ulong)simple_strtoul(argv[3], NULL, 16); - else - pattern = 0; - - if (argc > 4) - iteration_limit = (ulong)simple_strtoul(argv[4], NULL, 16); - else - iteration_limit = 0; - -#if defined(CONFIG_SYS_ALT_MEMTEST) - printf ("Testing %08x ... %08x:\n", (uint)start, (uint)end); - debug("%s:%d: start 0x%p end 0x%p\n", - __FUNCTION__, __LINE__, start, end); - - for (;;) { - if (ctrlc()) { - putc ('\n'); - return 1; - } - - - if (iteration_limit && iterations > iteration_limit) { - printf("Tested %d iteration(s) with %lu errors.\n", - iterations-1, errs); - return errs != 0; - } - - printf("Iteration: %6d\r", iterations); - debug("\n"); - iterations++; - - /* - * Data line test: write a pattern to the first - * location, write the 1's complement to a 'parking' - * address (changes the state of the data bus so a - * floating bus doen't give a false OK), and then - * read the value back. Note that we read it back - * into a variable because the next time we read it, - * it might be right (been there, tough to explain to - * the quality guys why it prints a failure when the - * "is" and "should be" are obviously the same in the - * error message). - * - * Rather than exhaustively testing, we test some - * patterns by shifting '1' bits through a field of - * '0's and '0' bits through a field of '1's (i.e. - * pattern and ~pattern). - */ - addr = start; - for (j = 0; j < sizeof(bitpattern)/sizeof(bitpattern[0]); j++) { - val = bitpattern[j]; - for(; val != 0; val <<= 1) { - *addr = val; - *dummy = ~val; /* clear the test data off of the bus */ + num_words = (end_addr - start_addr) / sizeof(vu_long); + + /* + * Data line test: write a pattern to the first + * location, write the 1's complement to a 'parking' + * address (changes the state of the data bus so a + * floating bus doesn't give a false OK), and then + * read the value back. Note that we read it back + * into a variable because the next time we read it, + * it might be right (been there, tough to explain to + * the quality guys why it prints a failure when the + * "is" and "should be" are obviously the same in the + * error message). + * + * Rather than exhaustively testing, we test some + * patterns by shifting '1' bits through a field of + * '0's and '0' bits through a field of '1's (i.e. + * pattern and ~pattern). + */ + addr = buf; + for (j = 0; j < sizeof(bitpattern) / sizeof(bitpattern[0]); j++) { + val = bitpattern[j]; + for (; val != 0; val <<= 1) { + *addr = val; + *dummy = ~val; /* clear the test data off the bus */ readback = *addr; - if(readback != val) { - printf ("FAILURE (data line): " - "expected %08lx, actual %08lx\n", - val, readback); - errs++; - if (ctrlc()) { - putc ('\n'); - return 1; - } + if (readback != val) { + printf("FAILURE (data line): " + "expected %08lx, actual %08lx\n", + val, readback); + errs++; + if (ctrlc()) + return -1; } *addr = ~val; *dummy = val; readback = *addr; - if(readback != ~val) { - printf ("FAILURE (data line): " - "Is %08lx, should be %08lx\n", - readback, ~val); - errs++; - if (ctrlc()) { - putc ('\n'); - return 1; - } + if (readback != ~val) { + printf("FAILURE (data line): " + "Is %08lx, should be %08lx\n", + readback, ~val); + errs++; + if (ctrlc()) + return -1; } - } } + } - /* - * Based on code whose Original Author and Copyright - * information follows: Copyright (c) 1998 by Michael - * Barr. This software is placed into the public - * domain and may be used for any purpose. However, - * this notice must not be changed or removed and no - * warranty is either expressed or implied by its - * publication or distribution. - */ + /* + * Based on code whose Original Author and Copyright + * information follows: Copyright (c) 1998 by Michael + * Barr. This software is placed into the public + * domain and may be used for any purpose. However, + * this notice must not be changed or removed and no + * warranty is either expressed or implied by its + * publication or distribution. + */ - /* - * Address line test - * - * Description: Test the address bus wiring in a - * memory region by performing a walking - * 1's test on the relevant bits of the - * address and checking for aliasing. - * This test will find single-bit - * address failures such as stuck -high, - * stuck-low, and shorted pins. The base - * address and size of the region are - * selected by the caller. - * - * Notes: For best results, the selected base - * address should have enough LSB 0's to - * guarantee single address bit changes. - * For example, to test a 64-Kbyte - * region, select a base address on a - * 64-Kbyte boundary. Also, select the - * region size as a power-of-two if at - * all possible. - * - * Returns: 0 if the test succeeds, 1 if the test fails. - */ - len = ((ulong)end - (ulong)start)/sizeof(vu_long); - pattern = (vu_long) 0xaaaaaaaa; - anti_pattern = (vu_long) 0x55555555; + /* + * Address line test + + * Description: Test the address bus wiring in a + * memory region by performing a walking + * 1's test on the relevant bits of the + * address and checking for aliasing. + * This test will find single-bit + * address failures such as stuck-high, + * stuck-low, and shorted pins. The base + * address and size of the region are + * selected by the caller. + + * Notes: For best results, the selected base + * address should have enough LSB 0's to + * guarantee single address bit changes. + * For example, to test a 64-Kbyte + * region, select a base address on a + * 64-Kbyte boundary. Also, select the + * region size as a power-of-two if at + * all possible. + * + * Returns: 0 if the test succeeds, 1 if the test fails. + */ + pattern = (vu_long) 0xaaaaaaaa; + anti_pattern = (vu_long) 0x55555555; - debug("%s:%d: length = 0x%.8lx\n", - __FUNCTION__, __LINE__, - len); - /* - * Write the default pattern at each of the - * power-of-two offsets. - */ - for (offset = 1; offset < len; offset <<= 1) { - start[offset] = pattern; - } + debug("%s:%d: length = 0x%.8lx\n", __func__, __LINE__, num_words); + /* + * Write the default pattern at each of the + * power-of-two offsets. + */ + for (offset = 1; offset < num_words; offset <<= 1) + addr[offset] = pattern; - /* - * Check for address bits stuck high. - */ - test_offset = 0; - start[test_offset] = anti_pattern; + /* + * Check for address bits stuck high. + */ + test_offset = 0; + addr[test_offset] = anti_pattern; - for (offset = 1; offset < len; offset <<= 1) { - temp = start[offset]; - if (temp != pattern) { - printf ("\nFAILURE: Address bit stuck high @ 0x%.8lx:" + for (offset = 1; offset < num_words; offset <<= 1) { + temp = addr[offset]; + if (temp != pattern) { + printf("\nFAILURE: Address bit stuck high @ 0x%.8lx:" " expected 0x%.8lx, actual 0x%.8lx\n", - (ulong)&start[offset], pattern, temp); + start_addr + offset, pattern, temp); errs++; - if (ctrlc()) { - putc ('\n'); - return 1; - } - } + if (ctrlc()) + return -1; } - start[test_offset] = pattern; - WATCHDOG_RESET(); + } + addr[test_offset] = pattern; + WATCHDOG_RESET(); - /* - * Check for addr bits stuck low or shorted. - */ - for (test_offset = 1; test_offset < len; test_offset <<= 1) { - start[test_offset] = anti_pattern; + /* + * Check for addr bits stuck low or shorted. + */ + for (test_offset = 1; test_offset < num_words; test_offset <<= 1) { + addr[test_offset] = anti_pattern; - for (offset = 1; offset < len; offset <<= 1) { - temp = start[offset]; + for (offset = 1; offset < num_words; offset <<= 1) { + temp = addr[offset]; if ((temp != pattern) && (offset != test_offset)) { - printf ("\nFAILURE: Address bit stuck low or shorted @" - " 0x%.8lx: expected 0x%.8lx, actual 0x%.8lx\n", - (ulong)&start[offset], pattern, temp); - errs++; - if (ctrlc()) { - putc ('\n'); - return 1; - } + printf("\nFAILURE: Address bit stuck low or" + " shorted @ 0x%.8lx: expected 0x%.8lx," + " actual 0x%.8lx\n", + start_addr + offset, pattern, temp); + errs++; + if (ctrlc()) + return -1; } - } - start[test_offset] = pattern; } + addr[test_offset] = pattern; + } - /* - * Description: Test the integrity of a physical - * memory device by performing an - * increment/decrement test over the - * entire region. In the process every - * storage bit in the device is tested - * as a zero and a one. The base address - * and the size of the region are - * selected by the caller. - * - * Returns: 0 if the test succeeds, 1 if the test fails. - */ - num_words = ((ulong)end - (ulong)start)/sizeof(vu_long) + 1; + /* + * Description: Test the integrity of a physical + * memory device by performing an + * increment/decrement test over the + * entire region. In the process every + * storage bit in the device is tested + * as a zero and a one. The base address + * and the size of the region are + * selected by the caller. + * + * Returns: 0 if the test succeeds, 1 if the test fails. + */ + num_words++; - /* - * Fill memory with a known pattern. - */ - for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) { - WATCHDOG_RESET(); - start[offset] = pattern; - } + /* + * Fill memory with a known pattern. + */ + for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) { + WATCHDOG_RESET(); + addr[offset] = pattern; + } - /* - * Check each location and invert it for the second pass. - */ - for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) { - WATCHDOG_RESET(); - temp = start[offset]; - if (temp != pattern) { - printf ("\nFAILURE (read/write) @ 0x%.8lx:" + /* + * Check each location and invert it for the second pass. + */ + for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) { + WATCHDOG_RESET(); + temp = addr[offset]; + if (temp != pattern) { + printf("\nFAILURE (read/write) @ 0x%.8lx:" " expected 0x%.8lx, actual 0x%.8lx)\n", - (ulong)&start[offset], pattern, temp); + start_addr + offset, pattern, temp); errs++; - if (ctrlc()) { - putc ('\n'); - return 1; - } - } - - anti_pattern = ~pattern; - start[offset] = anti_pattern; + if (ctrlc()) + return -1; } - /* - * Check each location for the inverted pattern and zero it. - */ - for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) { - WATCHDOG_RESET(); - anti_pattern = ~pattern; - temp = start[offset]; - if (temp != anti_pattern) { - printf ("\nFAILURE (read/write): @ 0x%.8lx:" + anti_pattern = ~pattern; + addr[offset] = anti_pattern; + } + + /* + * Check each location for the inverted pattern and zero it. + */ + for (pattern = 1, offset = 0; offset < num_words; pattern++, offset++) { + WATCHDOG_RESET(); + anti_pattern = ~pattern; + temp = addr[offset]; + if (temp != anti_pattern) { + printf("\nFAILURE (read/write): @ 0x%.8lx:" " expected 0x%.8lx, actual 0x%.8lx)\n", - (ulong)&start[offset], anti_pattern, temp); + start_addr + offset, anti_pattern, temp); errs++; - if (ctrlc()) { - putc ('\n'); - return 1; - } - } - start[offset] = 0; + if (ctrlc()) + return -1; } + addr[offset] = 0; } -#else /* The original, quickie test */ - incr = 1; - for (;;) { - if (ctrlc()) { - putc ('\n'); - return 1; - } - - if (iteration_limit && iterations > iteration_limit) { - printf("Tested %d iteration(s) with %lu errors.\n", - iterations-1, errs); - return errs != 0; - } - ++iterations; - - printf ("\rPattern %08lX Writing..." - "%12s" - "\b\b\b\b\b\b\b\b\b\b", - pattern, ""); - - for (addr=start,val=pattern; addr<end; addr++) { - WATCHDOG_RESET(); - *addr = val; - val += incr; - } - - puts ("Reading..."); + return 0; +} - for (addr=start,val=pattern; addr<end; addr++) { - WATCHDOG_RESET(); - readback = *addr; - if (readback != val) { - printf ("\nMem error @ 0x%08X: " - "found %08lX, expected %08lX\n", - (uint)(uintptr_t)addr, readback, val); - errs++; - if (ctrlc()) { - putc ('\n'); - return 1; - } - } - val += incr; - } +static ulong mem_test_quick(vu_long *buf, ulong start_addr, ulong end_addr, + vu_long pattern, int iteration) +{ + vu_long *end; + vu_long *addr; + ulong errs = 0; + ulong incr, length; + ulong val, readback; + /* Alternate the pattern */ + incr = 1; + if (iteration & 1) { + incr = -incr; /* * Flip the pattern each time to make lots of zeros and * then, the next time, lots of ones. We decrement * the "negative" patterns and increment the "positive" * patterns to preserve this feature. */ - if(pattern & 0x80000000) { + if (pattern & 0x80000000) pattern = -pattern; /* complement & increment */ - } - else { + else pattern = ~pattern; + } + length = (end_addr - start_addr) / sizeof(ulong); + end = buf + length; + printf("\rPattern %08lX Writing..." + "%12s" + "\b\b\b\b\b\b\b\b\b\b", + pattern, ""); + + for (addr = buf, val = pattern; addr < end; addr++) { + WATCHDOG_RESET(); + *addr = val; + val += incr; + } + + puts("Reading..."); + + for (addr = buf, val = pattern; addr < end; addr++) { + WATCHDOG_RESET(); + readback = *addr; + if (readback != val) { + ulong offset = addr - buf; + + printf("\nMem error @ 0x%08X: " + "found %08lX, expected %08lX\n", + (uint)(uintptr_t)(start_addr + offset), + readback, val); + errs++; + if (ctrlc()) + return -1; } - incr = -incr; + val += incr; } -#endif - return 0; /* not reached */ + + return 0; } +/* + * Perform a memory test. A more complete alternative test can be + * configured using CONFIG_SYS_ALT_MEMTEST. The complete test loops until + * interrupted by ctrl-c or by a failure of one of the sub-tests. + */ +static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + ulong start, end; + vu_long *buf, *dummy; + int iteration_limit; + int ret; + ulong errs = 0; /* number of errors, or -1 if interrupted */ + ulong pattern; + int iteration; +#if defined(CONFIG_SYS_ALT_MEMTEST) + const int alt_test = 1; +#else + const int alt_test = 0; +#endif + + if (argc > 1) + start = simple_strtoul(argv[1], NULL, 16); + else + start = CONFIG_SYS_MEMTEST_START; + + if (argc > 2) + end = simple_strtoul(argv[2], NULL, 16); + else + end = CONFIG_SYS_MEMTEST_END; + + if (argc > 3) + pattern = (ulong)simple_strtoul(argv[3], NULL, 16); + else + pattern = 0; + + if (argc > 4) + iteration_limit = (ulong)simple_strtoul(argv[4], NULL, 16); + else + iteration_limit = 0; + + printf("Testing %08x ... %08x:\n", (uint)start, (uint)end); + debug("%s:%d: start %#08lx end %#08lx\n", __func__, __LINE__, + start, end); + + buf = map_sysmem(start, end - start); + dummy = map_sysmem(CONFIG_SYS_MEMTEST_SCRATCH, sizeof(vu_long)); + for (iteration = 0; + !iteration_limit || iteration < iteration_limit; + iteration++) { + if (ctrlc()) { + errs = -1UL; + break; + } + + printf("Iteration: %6d\r", iteration + 1); + debug("\n"); + if (alt_test) { + errs = mem_test_alt(buf, start, end, dummy); + } else { + errs = mem_test_quick(buf, start, end, pattern, + iteration); + } + if (errs == -1UL) + break; + } + + /* + * Work-around for eldk-4.2 which gives this warning if we try to + * case in the unmap_sysmem() call: + * warning: initialization discards qualifiers from pointer target type + */ + { + void *vbuf = (void *)buf; + void *vdummy = (void *)dummy; + + unmap_sysmem(vbuf); + unmap_sysmem(vdummy); + } + + if (errs == -1UL) { + /* Memory test was aborted - write a newline to finish off */ + putc('\n'); + ret = 1; + } else { + printf("Tested %d iteration(s) with %lu errors.\n", + iteration, errs); + ret = errs != 0; + } + + return ret; /* not reached */ +} +#endif /* CONFIG_CMD_MEMTEST */ /* Modify memory. * @@ -960,6 +1016,7 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[]) { ulong addr, i; int nbytes, size; + void *ptr = NULL; if (argc != 2) return CMD_RET_USAGE; @@ -1004,13 +1061,14 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[]) * the next value. A non-converted value exits. */ do { + ptr = map_sysmem(addr, size); printf("%08lx:", addr); if (size == 4) - printf(" %08x", *((uint *)addr)); + printf(" %08x", *((uint *)ptr)); else if (size == 2) - printf(" %04x", *((ushort *)addr)); + printf(" %04x", *((ushort *)ptr)); else - printf(" %02x", *((u_char *)addr)); + printf(" %02x", *((u_char *)ptr)); nbytes = readline (" ? "); if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) { @@ -1040,16 +1098,18 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[]) reset_cmd_timeout(); #endif if (size == 4) - *((uint *)addr) = i; + *((uint *)ptr) = i; else if (size == 2) - *((ushort *)addr) = i; + *((ushort *)ptr) = i; else - *((u_char *)addr) = i; + *((u_char *)ptr) = i; if (incrflag) addr += size; } } } while (nbytes); + if (ptr) + unmap_sysmem(ptr); mm_last_addr = addr; mm_last_size = size; @@ -1058,89 +1118,27 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[]) #ifdef CONFIG_CMD_CRC32 -#ifndef CONFIG_CRC32_VERIFY - static int do_mem_crc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - ulong addr, length; - ulong crc; - ulong *ptr; - - if (argc < 3) - return CMD_RET_USAGE; - - addr = simple_strtoul (argv[1], NULL, 16); - addr += base_address; - - length = simple_strtoul (argv[2], NULL, 16); - - crc = crc32_wd (0, (const uchar *) addr, length, CHUNKSZ_CRC32); - - printf ("CRC32 for %08lx ... %08lx ==> %08lx\n", - addr, addr + length - 1, crc); - - if (argc > 3) { - ptr = (ulong *) simple_strtoul (argv[3], NULL, 16); - *ptr = crc; - } - - return 0; -} - -#else /* CONFIG_CRC32_VERIFY */ - -int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - ulong addr, length; - ulong crc; - ulong *ptr; - ulong vcrc; - int verify; + int flags = 0; int ac; char * const *av; - if (argc < 3) { -usage: + if (argc < 3) return CMD_RET_USAGE; - } av = argv + 1; ac = argc - 1; +#ifdef CONFIG_HASH_VERIFY if (strcmp(*av, "-v") == 0) { - verify = 1; + flags |= HASH_FLAG_VERIFY; av++; ac--; - if (ac < 3) - goto usage; - } else - verify = 0; - - addr = simple_strtoul(*av++, NULL, 16); - addr += base_address; - length = simple_strtoul(*av++, NULL, 16); - - crc = crc32_wd (0, (const uchar *) addr, length, CHUNKSZ_CRC32); - - if (!verify) { - printf ("CRC32 for %08lx ... %08lx ==> %08lx\n", - addr, addr + length - 1, crc); - if (ac > 2) { - ptr = (ulong *) simple_strtoul (*av++, NULL, 16); - *ptr = crc; - } - } else { - vcrc = simple_strtoul(*av++, NULL, 16); - if (vcrc != crc) { - printf ("CRC32 for %08lx ... %08lx ==> %08lx != %08lx ** ERROR **\n", - addr, addr + length - 1, crc, vcrc); - return 1; - } } +#endif - return 0; - + return hash_command("crc32", flags, cmdtp, flag, ac, av); } -#endif /* CONFIG_CRC32_VERIFY */ #endif @@ -1243,11 +1241,13 @@ U_BOOT_CMD( ); #endif /* CONFIG_LOOPW */ +#ifdef CONFIG_CMD_MEMTEST U_BOOT_CMD( mtest, 5, 1, do_mem_mtest, "simple RAM read/write test", "[start [end [pattern [iterations]]]]" ); +#endif /* CONFIG_CMD_MEMTEST */ #ifdef CONFIG_MX_CYCLIC U_BOOT_CMD( diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 7dacd5114c..8c53a10315 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -282,6 +282,13 @@ static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) mmc_init(mmc); + if ((state == MMC_WRITE || state == MMC_ERASE)) { + if (mmc_getwp(mmc) == 1) { + printf("Error: card is write protected!\n"); + return 1; + } + } + switch (state) { case MMC_READ: n = mmc->block_dev.block_read(curr_device, blk, diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c index 06fc171fe3..5192dee8ae 100644 --- a/common/cmd_mtdparts.c +++ b/common/cmd_mtdparts.c @@ -230,7 +230,6 @@ static void memsize_format(char *buf, u32 size) */ static void index_partitions(void) { - char buf[16]; u16 mtddevnum; struct part_info *part; struct list_head *dentry; @@ -244,8 +243,7 @@ static void index_partitions(void) dev = list_entry(dentry, struct mtd_device, link); if (dev == current_mtd_dev) { mtddevnum += current_mtd_partnum; - sprintf(buf, "%d", mtddevnum); - setenv("mtddevnum", buf); + setenv_ulong("mtddevnum", mtddevnum); break; } mtddevnum += dev->num_parts; @@ -1422,7 +1420,7 @@ static int delete_partition(const char *id) return 1; if (generate_mtdparts_save(last_parts, MTDPARTS_MAXLEN) != 0) { - printf("generated mtdparts too long, reseting to null\n"); + printf("generated mtdparts too long, resetting to null\n"); return 1; } return 0; @@ -1520,7 +1518,7 @@ static int spread_partitions(void) index_partitions(); if (generate_mtdparts_save(last_parts, MTDPARTS_MAXLEN) != 0) { - printf("generated mtdparts too long, reseting to null\n"); + printf("generated mtdparts too long, resetting to null\n"); return 1; } return 0; @@ -2018,7 +2016,7 @@ static int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, } if (generate_mtdparts_save(last_parts, MTDPARTS_MAXLEN) != 0) { - printf("generated mtdparts too long, reseting to null\n"); + printf("generated mtdparts too long, resetting to null\n"); return 1; } diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 1568594ca4..32348f3773 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -373,7 +373,6 @@ static void nand_print_and_set_info(int idx) { nand_info_t *nand = &nand_info[idx]; struct nand_chip *chip = nand->priv; - char buf[32]; printf("Device %d: ", idx); if (chip->numchips > 1) @@ -385,14 +384,9 @@ static void nand_print_and_set_info(int idx) printf(" Erase size %8d b\n", nand->erasesize); /* Set geometry info */ - sprintf(buf, "%x", nand->writesize); - setenv("nand_writesize", buf); - - sprintf(buf, "%x", nand->oobsize); - setenv("nand_oobsize", buf); - - sprintf(buf, "%x", nand->erasesize); - setenv("nand_erasesize", buf); + setenv_hex("nand_writesize", nand->writesize); + setenv_hex("nand_oobsize", nand->oobsize); + setenv_hex("nand_erasesize", nand->erasesize); } static int raw_access(nand_info_t *nand, ulong addr, loff_t off, ulong count, @@ -608,7 +602,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) size_t rwsize; ulong pagecount = 1; int read; - int raw; + int raw = 0; if (argc < 4) goto usage; diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index 7633f0c44a..947d6c4ed6 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -295,17 +295,17 @@ int setenv_ulong(const char *varname, ulong value) } /** - * Set an environment variable to an address in hex + * Set an environment variable to an value in hex * * @param varname Environmet variable to set - * @param addr Value to set it to + * @param value Value to set it to * @return 0 if ok, 1 on error */ -int setenv_addr(const char *varname, const void *addr) +int setenv_hex(const char *varname, ulong value) { char str[17]; - sprintf(str, "%lx", (uintptr_t)addr); + sprintf(str, "%lx", value); return setenv(varname, str); } @@ -325,41 +325,50 @@ static int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int do_env_ask(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char message[CONFIG_SYS_CBSIZE]; - int size = CONFIG_SYS_CBSIZE - 1; - int i, len, pos; + int i, len, pos, size; char *local_args[4]; + char *endptr; local_args[0] = argv[0]; local_args[1] = argv[1]; local_args[2] = NULL; local_args[3] = NULL; - /* Check the syntax */ - switch (argc) { - case 1: + /* + * Check the syntax: + * + * env_ask envname [message1 ...] [size] + */ + if (argc == 1) return CMD_RET_USAGE; - case 2: /* env_ask envname */ - sprintf(message, "Please enter '%s':", argv[1]); - break; - - case 3: /* env_ask envname size */ - sprintf(message, "Please enter '%s':", argv[1]); - size = simple_strtoul(argv[2], NULL, 10); - break; + /* + * We test the last argument if it can be converted + * into a decimal number. If yes, we assume it's + * the size. Otherwise we echo it as part of the + * message. + */ + i = simple_strtoul(argv[argc - 1], &endptr, 10); + if (*endptr != '\0') { /* no size */ + size = CONFIG_SYS_CBSIZE - 1; + } else { /* size given */ + size = i; + --argc; + } - default: /* env_ask envname message1 ... messagen size */ - for (i = 2, pos = 0; i < argc - 1; i++) { + if (argc <= 2) { + sprintf(message, "Please enter '%s': ", argv[1]); + } else { + /* env_ask envname message1 ... messagen [size] */ + for (i = 2, pos = 0; i < argc; i++) { if (pos) message[pos++] = ' '; strcpy(message + pos, argv[i]); pos += strlen(argv[i]); } - + message[pos++] = ' '; message[pos] = '\0'; - size = simple_strtoul(argv[argc - 1], NULL, 10); - break; } if (size >= CONFIG_SYS_CBSIZE) @@ -552,7 +561,8 @@ static int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc, else buffer[0] = '\0'; - readline_into_buffer("edit: ", buffer, 0); + if (readline_into_buffer("edit: ", buffer, 0) < 0) + return 1; return setenv(argv[1], buffer); } @@ -891,8 +901,7 @@ NXTARG: ; envp->flags = ACTIVE_FLAG; #endif } - sprintf(buf, "%zX", (size_t)(len + offsetof(env_t, data))); - setenv("filesize", buf); + setenv_hex("filesize", len + offsetof(env_t, data)); return 0; @@ -1168,14 +1177,7 @@ U_BOOT_CMD( askenv, CONFIG_SYS_MAXARGS, 1, do_env_ask, "get environment variables from stdin", "name [message] [size]\n" - " - get environment variable 'name' from stdin (max 'size' chars)\n" - "askenv name\n" - " - get environment variable 'name' from stdin\n" - "askenv name size\n" - " - get environment variable 'name' from stdin (max 'size' chars)\n" - "askenv name [message] size\n" - " - display 'message' string and get environment variable 'name'" - "from stdin (max 'size' chars)" + " - get environment variable 'name' from stdin (max 'size' chars)" ); #endif diff --git a/common/cmd_part.c b/common/cmd_part.c index d997597c1e..b79f074f84 100644 --- a/common/cmd_part.c +++ b/common/cmd_part.c @@ -96,7 +96,7 @@ int do_part(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD( part, 5, 1, do_part, "disk partition related commands", - "part uuid <interface> <dev>:<part>\n" + "uuid <interface> <dev>:<part>\n" " - print partition UUID\n" "part uuid <interface> <dev>:<part> <varname>\n" " - set environment variable to partition UUID\n" diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c index 08a6563448..b591bd3774 100644 --- a/common/cmd_reginfo.c +++ b/common/cmd_reginfo.c @@ -191,7 +191,7 @@ static int do_reginfo(cmd_tbl_t *cmdtp, int flag, int argc, #elif defined(CONFIG_BLACKFIN) puts("\nSystem Configuration registers\n"); - +#ifndef __ADSPBF60x__ puts("\nPLL Registers\n"); printf("\tPLL_DIV: 0x%04x PLL_CTL: 0x%04x\n", bfin_read_PLL_DIV(), bfin_read_PLL_CTL()); @@ -227,7 +227,24 @@ static int do_reginfo(cmd_tbl_t *cmdtp, int flag, int argc, printf("\tEBIU_SDSTAT: 0x%04x EBIU_SDGCTL: 0x%08x\n", bfin_read_EBIU_SDSTAT(), bfin_read_EBIU_SDGCTL()); # endif +#else + puts("\nCGU Registers\n"); + printf("\tCGU_DIV: 0x%08x CGU_CTL: 0x%08x\n", + bfin_read_CGU_DIV(), bfin_read_CGU_CTL()); + printf("\tCGU_STAT: 0x%08x CGU_LOCKCNT: 0x%08x\n", + bfin_read_CGU_STAT(), bfin_read_CGU_CLKOUTSEL()); + puts("\nSMC DDR Registers\n"); + printf("\tDDR_CFG: 0x%08x DDR_TR0: 0x%08x\n", + bfin_read_DMC0_CFG(), bfin_read_DMC0_TR0()); + printf("\tDDR_TR1: 0x%08x DDR_TR2: 0x%08x\n", + bfin_read_DMC0_TR1(), bfin_read_DMC0_TR2()); + printf("\tDDR_MR: 0x%08x DDR_EMR1: 0x%08x\n", + bfin_read_DMC0_MR(), bfin_read_DMC0_EMR1()); + printf("\tDDR_CTL: 0x%08x DDR_STAT: 0x%08x\n", + bfin_read_DMC0_CTL(), bfin_read_DMC0_STAT()); + printf("\tDDR_DLLCTL:0x%08x\n", bfin_read_DMC0_DLLCTL()); +#endif #endif /* CONFIG_BLACKFIN */ return 0; diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c index e658618c6d..717c7f657b 100644 --- a/common/cmd_reiser.c +++ b/common/cmd_reiser.c @@ -100,7 +100,6 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ulong addr = 0, filelen; disk_partition_t info; block_dev_desc_t *dev_desc = NULL; - char buf [12]; unsigned long count; char *addr_str; @@ -175,8 +174,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) load_addr = addr; printf ("\n%ld bytes read\n", filelen); - sprintf(buf, "%lX", filelen); - setenv("filesize", buf); + setenv_hex("filesize", filelen); return filelen; } diff --git a/common/cmd_sandbox.c b/common/cmd_sandbox.c new file mode 100644 index 0000000000..206a48614d --- /dev/null +++ b/common/cmd_sandbox.c @@ -0,0 +1,63 @@ +/* + * Copyright (c) 2012, Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <fs.h> + +static int do_sandbox_load(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + return do_load(cmdtp, flag, argc, argv, FS_TYPE_SANDBOX, 16); +} + +static int do_sandbox_ls(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + return do_ls(cmdtp, flag, argc, argv, FS_TYPE_SANDBOX); +} + +static cmd_tbl_t cmd_sandbox_sub[] = { + U_BOOT_CMD_MKENT(load, 3, 0, do_sandbox_load, "", ""), + U_BOOT_CMD_MKENT(ls, 3, 0, do_sandbox_ls, "", ""), +}; + +static int do_sandbox(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + cmd_tbl_t *c; + + /* Skip past 'sandbox' */ + argc--; + argv++; + + c = find_cmd_tbl(argv[0], cmd_sandbox_sub, + ARRAY_SIZE(cmd_sandbox_sub)); + + if (c) + return c->cmd(cmdtp, flag, argc, argv); + else + return CMD_RET_USAGE; +} + +U_BOOT_CMD( + sb, 6, 1, do_sandbox, + "Miscellaneous sandbox commands", + "load host <addr> <filename> [<bytes> <offset>] - load a file from host\n" + "sb ls host <filename> - save a file to host" +); diff --git a/common/cmd_sata.c b/common/cmd_sata.c index b401bd1024..8d57285d05 100644 --- a/common/cmd_sata.c +++ b/common/cmd_sata.c @@ -196,7 +196,7 @@ static int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD( sata, 5, 1, do_sata, "SATA sub system", - "sata init - init SATA sub system\n" + "init - init SATA sub system\n" "sata info - show available SATA devices\n" "sata device [dev] - show or set current device\n" "sata part [dev] - print partition table\n" diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c index 5a042951da..7a38e94507 100644 --- a/common/cmd_setexpr.c +++ b/common/cmd_setexpr.c @@ -53,7 +53,7 @@ static ulong get_arg(char *s, int w) static int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong a, b; - char buf[16]; + ulong value; int w; /* Validate arguments */ @@ -67,8 +67,7 @@ static int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) a = get_arg(argv[2], w); if (argc == 3) { - sprintf(buf, "%lx", a); - setenv(argv[1], buf); + setenv_hex(argv[1], a); return 0; } @@ -76,20 +75,36 @@ static int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) b = get_arg(argv[4], w); switch (argv[3][0]) { - case '|': sprintf(buf, "%lx", (a | b)); break; - case '&': sprintf(buf, "%lx", (a & b)); break; - case '+': sprintf(buf, "%lx", (a + b)); break; - case '^': sprintf(buf, "%lx", (a ^ b)); break; - case '-': sprintf(buf, "%lx", (a - b)); break; - case '*': sprintf(buf, "%lx", (a * b)); break; - case '/': sprintf(buf, "%lx", (a / b)); break; - case '%': sprintf(buf, "%lx", (a % b)); break; + case '|': + value = a | b; + break; + case '&': + value = a & b; + break; + case '+': + value = a + b; + break; + case '^': + value = a ^ b; + break; + case '-': + value = a - b; + break; + case '*': + value = a * b; + break; + case '/': + value = a / b; + break; + case '%': + value = a % b; + break; default: printf("invalid op\n"); return 1; } - setenv(argv[1], buf); + setenv_hex(argv[1], value); return 0; } diff --git a/common/cmd_sha1sum.c b/common/cmd_sha1sum.c index fe927ab248..9f08629b87 100644 --- a/common/cmd_sha1sum.c +++ b/common/cmd_sha1sum.c @@ -31,7 +31,7 @@ int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - int verify = 0; + int flags = HASH_FLAG_ENV; int ac; char * const *av; @@ -42,13 +42,13 @@ int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) ac = argc - 1; #ifdef CONFIG_SHA1SUM_VERIFY if (strcmp(*av, "-v") == 0) { - verify = 1; + flags |= HASH_FLAG_VERIFY; av++; ac--; } #endif - return hash_command("sha1", verify, cmdtp, flag, ac, av); + return hash_command("sha1", flags, cmdtp, flag, ac, av); } #ifdef CONFIG_SHA1SUM_VERIFY diff --git a/common/cmd_spl.c b/common/cmd_spl.c index e3c543b46a..94b0a17156 100644 --- a/common/cmd_spl.c +++ b/common/cmd_spl.c @@ -184,7 +184,11 @@ static int do_spl(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) U_BOOT_CMD( spl, 6 , 1, do_spl, "SPL configuration", - "export <img=atags|fdt> [kernel_addr] [initrd_addr] " - "[fdt_addr if <img> = fdt] - export a kernel parameter image\n" - "\t initrd_img can be set to \"-\" if fdt_addr without initrd img is" - "used"); + "export <img=atags|fdt> [kernel_addr] [initrd_addr] [fdt_addr]\n" + "\timg\t\t\"atags\" or \"fdt\"\n" + "\tkernel_addr\taddress where a kernel image is stored.\n" + "\t\t\tkernel is loaded as part of the boot process, but it is not started.\n" + "\tinitrd_addr\taddress of initial ramdisk\n" + "\t\t\tcan be set to \"-\" if fdt_addr without initrd_addr is used.\n" + "\tfdt_addr\tin case of fdt, the address of the device tree.\n" + ); diff --git a/common/cmd_unzip.c b/common/cmd_unzip.c index 43ed7915fd..7470c2b12e 100644 --- a/common/cmd_unzip.c +++ b/common/cmd_unzip.c @@ -28,7 +28,6 @@ static int do_unzip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned long src, dst; unsigned long src_len = ~0UL, dst_len = ~0UL; - char buf[32]; switch (argc) { case 4: @@ -46,8 +45,7 @@ static int do_unzip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; printf("Uncompressed size: %ld = 0x%lX\n", src_len, src_len); - sprintf(buf, "%lX", src_len); - setenv("filesize", buf); + setenv_hex("filesize", src_len); return 0; } diff --git a/common/cmd_usb_mass_storage.c b/common/cmd_usb_mass_storage.c new file mode 100644 index 0000000000..87a5f2f3ad --- /dev/null +++ b/common/cmd_usb_mass_storage.c @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2011 Samsung Electronics + * Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <errno.h> +#include <common.h> +#include <command.h> +#include <g_dnl.h> +#include <usb_mass_storage.h> + +int do_usb_mass_storage(cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]) +{ + char *ep; + unsigned int dev_num = 0, offset = 0, part_size = 0; + int rc; + + struct ums_board_info *ums_info; + static char *s = "ums"; + + if (argc < 2) { + printf("usage: ums <dev> - e.g. ums 0\n"); + return 0; + } + + dev_num = (int)simple_strtoul(argv[1], &ep, 16); + + if (dev_num) { + puts("\nSet eMMC device to 0! - e.g. ums 0\n"); + goto fail; + } + + board_usb_init(); + ums_info = board_ums_init(dev_num, offset, part_size); + + if (!ums_info) { + printf("MMC: %d -> NOT available\n", dev_num); + goto fail; + } + rc = fsg_init(ums_info); + if (rc) { + printf("cmd ums: fsg_init failed\n"); + goto fail; + } + + g_dnl_register(s); + + while (1) { + /* Handle control-c and timeouts */ + if (ctrlc()) { + printf("The remote end did not respond in time.\n"); + goto exit; + } + usb_gadget_handle_interrupts(); + /* Check if USB cable has been detached */ + if (fsg_main_thread(NULL) == EIO) + goto exit; + } +exit: + g_dnl_unregister(); + return 0; + +fail: + return -1; +} + +U_BOOT_CMD(ums, CONFIG_SYS_MAXARGS, 1, do_usb_mass_storage, + "Use the UMS [User Mass Storage]", + "ums - User Mass Storage Gadget" +); diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c index 42a7eba766..ea0a26e784 100644 --- a/common/cmd_ximg.c +++ b/common/cmd_ximg.c @@ -50,7 +50,6 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) ulong data, len, count; int verify; int part = 0; - char pbuf[10]; image_header_t *hdr; #if defined(CONFIG_FIT) const char *uname = NULL; @@ -256,10 +255,8 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) puts("OK\n"); } - sprintf(pbuf, "%8lx", data); - setenv("fileaddr", pbuf); - sprintf(pbuf, "%8lx", len); - setenv("filesize", pbuf); + setenv_hex("fileaddr", data); + setenv_hex("filesize", len); return 0; } diff --git a/common/cmd_zfs.c b/common/cmd_zfs.c index 1df0c4d72a..900e977c1c 100644 --- a/common/cmd_zfs.c +++ b/common/cmd_zfs.c @@ -129,8 +129,7 @@ static int do_zfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] load_addr = addr; printf("%llu bytes read\n", zfile.size); - sprintf(buf, "%llX", zfile.size); - setenv("filesize", buf); + setenv_hex("filesize", zfile.size); return 0; } diff --git a/common/cmd_zip.c b/common/cmd_zip.c index a73c86d592..8607da81e2 100644 --- a/common/cmd_zip.c +++ b/common/cmd_zip.c @@ -28,7 +28,6 @@ static int do_zip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned long src, dst; unsigned long src_len, dst_len = ~0UL; - char buf[32]; switch (argc) { case 5: @@ -47,8 +46,7 @@ static int do_zip(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; printf("Compressed size: %ld = 0x%lX\n", dst_len, dst_len); - sprintf(buf, "%lX", dst_len); - setenv("filesize", buf); + setenv_hex("filesize", dst_len); return 0; } diff --git a/common/dlmalloc.c b/common/dlmalloc.c index b2f0a1ad52..2a9d169f92 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -1485,7 +1485,7 @@ static mbinptr av_[NAV * 2 + 2] = { }; #ifdef CONFIG_NEEDS_MANUAL_RELOC -void malloc_bin_reloc (void) +static void malloc_bin_reloc(void) { mbinptr *p = &av_[2]; size_t i; @@ -1493,6 +1493,8 @@ void malloc_bin_reloc (void) for (i = 2; i < ARRAY_SIZE(av_); ++i, ++p) *p = (mbinptr)((ulong)*p + gd->reloc_off); } +#else +static inline void malloc_bin_reloc(void) {} #endif ulong mem_malloc_start = 0; @@ -1526,6 +1528,8 @@ void mem_malloc_init(ulong start, ulong size) mem_malloc_brk = start; memset((void *)mem_malloc_start, 0, size); + + malloc_bin_reloc(); } /* field-extraction macros */ diff --git a/common/env_nand.c b/common/env_nand.c index 22e72a20b0..5b69889c02 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -331,6 +331,7 @@ int get_nand_env_oob(nand_info_t *nand, unsigned long *result) void env_relocate_spec(void) { #if !defined(ENV_IS_EMBEDDED) + int read1_fail = 0, read2_fail = 0; int crc1_ok = 0, crc2_ok = 0; env_t *ep, *tmp_env1, *tmp_env2; @@ -342,14 +343,19 @@ void env_relocate_spec(void) goto done; } - if (readenv(CONFIG_ENV_OFFSET, (u_char *) tmp_env1)) - puts("No Valid Environment Area found\n"); + read1_fail = readenv(CONFIG_ENV_OFFSET, (u_char *) tmp_env1); + read2_fail = readenv(CONFIG_ENV_OFFSET_REDUND, (u_char *) tmp_env2); - if (readenv(CONFIG_ENV_OFFSET_REDUND, (u_char *) tmp_env2)) - puts("No Valid Redundant Environment Area found\n"); + if (read1_fail && read2_fail) + puts("*** Error - No Valid Environment Area found\n"); + else if (read1_fail || read2_fail) + puts("*** Warning - some problems detected " + "reading environment; recovered successfully\n"); - crc1_ok = crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc; - crc2_ok = crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc; + crc1_ok = !read1_fail && + (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc); + crc2_ok = !read2_fail && + (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc); if (!crc1_ok && !crc2_ok) { set_default_env("!bad CRC"); diff --git a/common/hash.c b/common/hash.c index e3a6e438a3..f5badcb930 100644 --- a/common/hash.c +++ b/common/hash.c @@ -28,49 +28,87 @@ #include <hash.h> #include <sha1.h> #include <sha256.h> +#include <asm/io.h> /* * These are the hash algorithms we support. Chips which support accelerated - * crypto could perhaps add named version of these algorithms here. + * crypto could perhaps add named version of these algorithms here. Note that + * algorithm names must be in lower case. */ static struct hash_algo hash_algo[] = { -#ifdef CONFIG_SHA1 + /* + * This is CONFIG_CMD_SHA1SUM instead of CONFIG_SHA1 since otherwise + * it bloats the code for boards which use SHA1 but not the 'hash' + * or 'sha1sum' commands. + */ +#ifdef CONFIG_CMD_SHA1SUM { - "SHA1", + "sha1", SHA1_SUM_LEN, sha1_csum_wd, CHUNKSZ_SHA1, }, +#define MULTI_HASH #endif #ifdef CONFIG_SHA256 { - "SHA256", + "sha256", SHA256_SUM_LEN, sha256_csum_wd, CHUNKSZ_SHA256, }, +#define MULTI_HASH #endif + { + "crc32", + 4, + crc32_wd_buf, + CHUNKSZ_CRC32, + }, }; +#if defined(CONFIG_HASH_VERIFY) || defined(CONFIG_CMD_HASH) +#define MULTI_HASH +#endif + +/* Try to minimize code size for boards that don't want much hashing */ +#ifdef MULTI_HASH +#define multi_hash() 1 +#else +#define multi_hash() 0 +#endif + /** * store_result: Store the resulting sum to an address or variable * * @algo: Hash algorithm being used * @sum: Hash digest (algo->digest_size bytes) * @dest: Destination, interpreted as a hex address if it starts - * with * or otherwise as an environment variable. + * with * (or allow_env_vars is 0) or otherwise as an + * environment variable. + * @allow_env_vars: non-zero to permit storing the result to an + * variable environment */ static void store_result(struct hash_algo *algo, const u8 *sum, - const char *dest) + const char *dest, int allow_env_vars) { unsigned int i; + int env_var = 0; - if (*dest == '*') { - u8 *ptr; + /* + * If environment variables are allowed, then we assume that 'dest' + * is an environment variable, unless it starts with *, in which + * case we assume it is an address. If not allowed, it is always an + * address. This is to support the crc32 command. + */ + if (allow_env_vars) { + if (*dest == '*') + dest++; + else + env_var = 1; + } - ptr = (u8 *)simple_strtoul(dest + 1, NULL, 16); - memcpy(ptr, sum, algo->digest_size); - } else { + if (env_var) { char str_output[HASH_MAX_DIGEST_SIZE * 2 + 1]; char *str_ptr = str_output; @@ -80,6 +118,14 @@ static void store_result(struct hash_algo *algo, const u8 *sum, } str_ptr = '\0'; setenv(dest, str_output); + } else { + ulong addr; + void *buf; + + addr = simple_strtoul(dest, NULL, 16); + buf = map_sysmem(addr, algo->digest_size); + memcpy(buf, sum, algo->digest_size); + unmap_sysmem(buf); } } @@ -94,15 +140,31 @@ static void store_result(struct hash_algo *algo, const u8 *sum, * Otherwise we assume it is an environment variable, and * look up its value (it must contain a hex digest). * @vsum: Returns binary digest value (algo->digest_size bytes) + * @allow_env_vars: non-zero to permit storing the result to an environment + * variable. If 0 then verify_str is assumed to be an + * address, and the * prefix is not expected. * @return 0 if ok, non-zero on error */ -static int parse_verify_sum(struct hash_algo *algo, char *verify_str, u8 *vsum) +static int parse_verify_sum(struct hash_algo *algo, char *verify_str, u8 *vsum, + int allow_env_vars) { - if (*verify_str == '*') { - u8 *ptr; + int env_var = 0; + + /* See comment above in store_result() */ + if (allow_env_vars) { + if (*verify_str == '*') + verify_str++; + else + env_var = 1; + } - ptr = (u8 *)simple_strtoul(verify_str + 1, NULL, 16); - memcpy(vsum, ptr, algo->digest_size); + if (env_var) { + ulong addr; + void *buf; + + addr = simple_strtoul(verify_str, NULL, 16); + buf = map_sysmem(addr, algo->digest_size); + memcpy(vsum, buf, algo->digest_size); } else { unsigned int i; char *vsum_str; @@ -141,7 +203,7 @@ static struct hash_algo *find_hash_algo(const char *name) int i; for (i = 0; i < ARRAY_SIZE(hash_algo); i++) { - if (!strcasecmp(name, hash_algo[i].name)) + if (!strcmp(name, hash_algo[i].name)) return &hash_algo[i]; } @@ -158,63 +220,87 @@ static void show_hash(struct hash_algo *algo, ulong addr, ulong len, printf("%02x", output[i]); } -int hash_command(const char *algo_name, int verify, cmd_tbl_t *cmdtp, int flag, +int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - struct hash_algo *algo; ulong addr, len; - u8 output[HASH_MAX_DIGEST_SIZE]; - u8 vsum[HASH_MAX_DIGEST_SIZE]; if (argc < 2) return CMD_RET_USAGE; - algo = find_hash_algo(algo_name); - if (!algo) { - printf("Unknown hash algorithm '%s'\n", algo_name); - return CMD_RET_USAGE; - } addr = simple_strtoul(*argv++, NULL, 16); len = simple_strtoul(*argv++, NULL, 16); - argc -= 2; - if (algo->digest_size > HASH_MAX_DIGEST_SIZE) { - puts("HASH_MAX_DIGEST_SIZE exceeded\n"); - return 1; - } + if (multi_hash()) { + struct hash_algo *algo; + u8 output[HASH_MAX_DIGEST_SIZE]; + u8 vsum[HASH_MAX_DIGEST_SIZE]; + void *buf; - algo->hash_func_ws((const unsigned char *)addr, len, output, - algo->chunk_size); + algo = find_hash_algo(algo_name); + if (!algo) { + printf("Unknown hash algorithm '%s'\n", algo_name); + return CMD_RET_USAGE; + } + argc -= 2; - /* Try to avoid code bloat when verify is not needed */ + if (algo->digest_size > HASH_MAX_DIGEST_SIZE) { + puts("HASH_MAX_DIGEST_SIZE exceeded\n"); + return 1; + } + + buf = map_sysmem(addr, len); + algo->hash_func_ws(buf, len, output, algo->chunk_size); + unmap_sysmem(buf); + + /* Try to avoid code bloat when verify is not needed */ #ifdef CONFIG_HASH_VERIFY - if (verify) { + if (flags & HASH_FLAG_VERIFY) { #else - if (0) { + if (0) { #endif - if (!argc) - return CMD_RET_USAGE; - if (parse_verify_sum(algo, *argv, vsum)) { - printf("ERROR: %s does not contain a valid %s sum\n", - *argv, algo->name); - return 1; - } - if (memcmp(output, vsum, algo->digest_size) != 0) { - int i; + if (!argc) + return CMD_RET_USAGE; + if (parse_verify_sum(algo, *argv, vsum, + flags & HASH_FLAG_ENV)) { + printf("ERROR: %s does not contain a valid " + "%s sum\n", *argv, algo->name); + return 1; + } + if (memcmp(output, vsum, algo->digest_size) != 0) { + int i; + show_hash(algo, addr, len, output); + printf(" != "); + for (i = 0; i < algo->digest_size; i++) + printf("%02x", vsum[i]); + puts(" ** ERROR **\n"); + return 1; + } + } else { show_hash(algo, addr, len, output); - printf(" != "); - for (i = 0; i < algo->digest_size; i++) - printf("%02x", vsum[i]); - puts(" ** ERROR **\n"); - return 1; + printf("\n"); + + if (argc) { + store_result(algo, output, *argv, + flags & HASH_FLAG_ENV); + } } + + /* Horrible code size hack for boards that just want crc32 */ } else { - show_hash(algo, addr, len, output); - printf("\n"); + ulong crc; + ulong *ptr; + + crc = crc32_wd(0, (const uchar *)addr, len, CHUNKSZ_CRC32); - if (argc) - store_result(algo, output, *argv); + printf("CRC32 for %08lx ... %08lx ==> %08lx\n", + addr, addr + len - 1, crc); + + if (argc > 3) { + ptr = (ulong *)simple_strtoul(argv[3], NULL, 16); + *ptr = crc; + } } return 0; diff --git a/common/image.c b/common/image.c index ae1a9d3bd1..6afbb40a98 100644 --- a/common/image.c +++ b/common/image.c @@ -74,6 +74,8 @@ static const image_header_t *image_get_ramdisk(ulong rd_addr, uint8_t arch, #include <image.h> #endif /* !USE_HOSTCC*/ +#include <u-boot/crc.h> + static const table_entry_t uimage_arch[] = { { IH_ARCH_INVALID, NULL, "Invalid ARCH", }, { IH_ARCH_ALPHA, "alpha", "Alpha", }, @@ -160,8 +162,6 @@ static const table_entry_t uimage_comp[] = { { -1, "", "", }, }; -uint32_t crc32(uint32_t, const unsigned char *, uint); -uint32_t crc32_wd(uint32_t, const unsigned char *, uint, uint); #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || defined(USE_HOSTCC) static void genimg_print_time(time_t timestamp); #endif diff --git a/common/lcd.c b/common/lcd.c index 66d4f94f9e..77914adbce 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -33,6 +33,8 @@ #include <common.h> #include <command.h> #include <stdarg.h> +#include <search.h> +#include <env_callback.h> #include <linux/types.h> #include <stdio_dev.h> #if defined(CONFIG_POST) @@ -384,8 +386,6 @@ int drv_lcd_init (void) lcd_base = (void *)(gd->fb_base); - lcd_get_size(&lcd_line_length); - lcd_init(lcd_base); /* LCD initialization */ /* Device initialization */ @@ -468,6 +468,8 @@ static int lcd_init(void *lcdbase) debug("[LCD] Initializing LCD frambuffer at %p\n", lcdbase); lcd_ctrl_init(lcdbase); + lcd_get_size(&lcd_line_length); + lcd_line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; lcd_is_enabled = 1; lcd_clear(); lcd_enable (); @@ -1034,6 +1036,18 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) } #endif +#ifdef CONFIG_SPLASH_SCREEN_PREPARE +static inline int splash_screen_prepare(void) +{ + return board_splash_screen_prepare(); +} +#else +static inline int splash_screen_prepare(void) +{ + return 0; +} +#endif + static void *lcd_logo(void) { #ifdef CONFIG_SPLASH_SCREEN @@ -1045,6 +1059,9 @@ static void *lcd_logo(void) int x = 0, y = 0; do_splash = 0; + if (splash_screen_prepare()) + return (void *)gd->fb_base; + addr = simple_strtoul (s, NULL, 16); #ifdef CONFIG_SPLASH_SCREEN_ALIGN s = getenv("splashpos"); @@ -1084,6 +1101,30 @@ static void *lcd_logo(void) #endif /* CONFIG_LCD_LOGO && !CONFIG_LCD_INFO_BELOW_LOGO */ } +#ifdef CONFIG_SPLASHIMAGE_GUARD +static int on_splashimage(const char *name, const char *value, enum env_op op, + int flags) +{ + ulong addr; + int aligned; + + if (op == env_op_delete) + return 0; + + addr = simple_strtoul(value, NULL, 16); + /* See README.displaying-bmps */ + aligned = (addr % 4 == 2); + if (!aligned) { + printf("Invalid splashimage value. Value must be 16 bit aligned, but not 32 bit aligned\n"); + return -1; + } + + return 0; +} + +U_BOOT_ENV_CALLBACK(splashimage, on_splashimage); +#endif + void lcd_position_cursor(unsigned col, unsigned row) { console_col = min(col, CONSOLE_COLS - 1); diff --git a/common/main.c b/common/main.c index e2d2e09bf9..a15f020830 100644 --- a/common/main.c +++ b/common/main.c @@ -95,7 +95,7 @@ extern void mdm_init(void); /* defined in board.c */ * Watch for 'delay' seconds for autoboot stop or autoboot delay string. * returns: 0 - no key string, allow autoboot 1 - got key string, abort */ -#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) +#if defined(CONFIG_BOOTDELAY) # if defined(CONFIG_AUTOBOOT_KEYED) #ifndef CONFIG_MENU static inline @@ -279,7 +279,7 @@ int abortboot(int bootdelay) return abort; } # endif /* CONFIG_AUTOBOOT_KEYED */ -#endif /* CONFIG_BOOTDELAY >= 0 */ +#endif /* CONFIG_BOOTDELAY */ /* * Runs the given boot command securely. Specifically: @@ -295,8 +295,7 @@ int abortboot(int bootdelay) * printing the error message to console. */ -#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) && \ - defined(CONFIG_OF_CONTROL) +#if defined(CONFIG_BOOTDELAY) && defined(CONFIG_OF_CONTROL) static void secure_boot_cmd(char *cmd) { cmd_tbl_t *cmdtp; @@ -358,11 +357,10 @@ void main_loop (void) int rc = 1; int flag; #endif -#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) && \ - defined(CONFIG_OF_CONTROL) +#if defined(CONFIG_BOOTDELAY) && defined(CONFIG_OF_CONTROL) char *env; #endif -#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) +#if defined(CONFIG_BOOTDELAY) char *s; int bootdelay; #endif @@ -378,6 +376,10 @@ void main_loop (void) bootstage_mark_name(BOOTSTAGE_ID_MAIN_LOOP, "main_loop"); +#if defined CONFIG_OF_CONTROL + set_working_fdt_addr((void *)gd->fdt_blob); +#endif /* CONFIG_OF_CONTROL */ + #ifdef CONFIG_BOOTCOUNT_LIMIT bootcount = bootcount_load(); bootcount++; @@ -431,7 +433,7 @@ void main_loop (void) update_tftp (0UL); #endif /* CONFIG_UPDATE_TFTP */ -#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) +#if defined(CONFIG_BOOTDELAY) s = getenv ("bootdelay"); bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY; @@ -500,10 +502,6 @@ void main_loop (void) #endif /* CONFIG_MENUKEY */ #endif /* CONFIG_BOOTDELAY */ -#if defined CONFIG_OF_CONTROL - set_working_fdt_addr((void *)gd->fdt_blob); -#endif /* CONFIG_OF_CONTROL */ - /* * Main Loop for Monitor Command Processing */ diff --git a/common/spl/Makefile b/common/spl/Makefile index 5698a2335a..da2afc11b3 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -18,6 +18,7 @@ COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o COBJS-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o COBJS-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o +COBJS-$(CONFIG_SPL_ONENAND_SUPPORT) += spl_onenand.o COBJS-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o endif diff --git a/common/spl/spl.c b/common/spl/spl.c index ff9ba7b0a5..6715e0d203 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -197,6 +197,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2) spl_nand_load_image(); break; #endif +#ifdef CONFIG_SPL_ONENAND_SUPPORT + case BOOT_DEVICE_ONENAND: + spl_onenand_load_image(); + break; +#endif #ifdef CONFIG_SPL_NOR_SUPPORT case BOOT_DEVICE_NOR: spl_nor_load_image(); @@ -221,6 +226,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2) #endif break; #endif +#ifdef CONFIG_SPL_USBETH_SUPPORT + case BOOT_DEVICE_USBETH: + spl_net_load_image("usb_ether"); + break; +#endif default: debug("SPL: Un-supported Boot Device\n"); hang(); diff --git a/common/spl/spl_onenand.c b/common/spl/spl_onenand.c new file mode 100644 index 0000000000..4349303565 --- /dev/null +++ b/common/spl/spl_onenand.c @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2013 + * ISEE 2007 SL - Enric Balletbo i Serra <eballetbo@iseebcn.com> + * + * Based on common/spl/spl_nand.c + * Copyright (C) 2011 + * Corscience GmbH & Co. KG - Simon Schwarz <schwarz@corscience.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <config.h> +#include <spl.h> +#include <asm/io.h> +#include <onenand_uboot.h> + +void spl_onenand_load_image(void) +{ + struct image_header *header; + + debug("spl: onenand\n"); + + /*use CONFIG_SYS_TEXT_BASE as temporary storage area */ + header = (struct image_header *)(CONFIG_SYS_TEXT_BASE); + /* Load u-boot */ + onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS, + CONFIG_SYS_ONENAND_PAGE_SIZE, (void *)header); + spl_parse_image_header(header); + onenand_spl_load_image(CONFIG_SYS_ONENAND_U_BOOT_OFFS, + spl_image.size, (void *)spl_image.load_addr); +} @@ -23,8 +23,6 @@ ######################################################################### -include $(TOPDIR)/helper.mk - ifeq ($(CURDIR),$(SRCTREE)) dir := else @@ -221,6 +219,14 @@ ifeq ($(CONFIG_SPL_BUILD),y) CPPFLAGS += -DCONFIG_SPL_BUILD endif +# Does this architecture support generic board init? +ifeq ($(__HAVE_ARCH_GENERIC_BOARD),) +ifneq ($(CONFIG_SYS_GENERIC_BOARD),) +$(error Your architecture does not support generic board. Please undefined \ +CONFIG_SYS_GENERIC_BOARD in your board config file) +endif +endif + ifneq ($(RESET_VECTOR_ADDRESS),) CPPFLAGS += -DRESET_VECTOR_ADDRESS=$(RESET_VECTOR_ADDRESS) endif diff --git a/disk/part.c b/disk/part.c index 7bdc90eff7..d73625c443 100644 --- a/disk/part.c +++ b/disk/part.c @@ -35,16 +35,6 @@ #define PRINTF(fmt,args...) #endif -/* Rather than repeat this expression each time, add a define for it */ -#if (defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) ) -#define HAVE_BLOCK_DEVICE -#endif - struct block_drvr { char *name; block_dev_desc_t* (*get_dev)(int dev); @@ -472,6 +462,23 @@ int get_device_and_partition(const char *ifname, const char *dev_part_str, int part; disk_partition_t tmpinfo; + /* + * For now, we have a special case for sandbox, since there is no + * real block device support. + */ + if (0 == strcmp(ifname, "host")) { + *dev_desc = NULL; + info->start = info->size = info->blksz = 0; + info->bootable = 0; + strcpy((char *)info->type, BOOT_PART_TYPE); + strcpy((char *)info->name, "Sandbox host"); +#ifdef CONFIG_PARTITION_UUIDS + info->uuid[0] = 0; +#endif + + return 0; + } + /* If no dev_part_str, use bootdevice environment variable */ if (!dev_part_str || !strlen(dev_part_str) || !strcmp(dev_part_str, "-")) diff --git a/disk/part_amiga.c b/disk/part_amiga.c index dc7d46256d..0e6d82dbae 100644 --- a/disk/part_amiga.c +++ b/disk/part_amiga.c @@ -26,11 +26,7 @@ #include <ide.h> #include "part_amiga.h" -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef HAVE_BLOCK_DEVICE #undef AMIGA_DEBUG diff --git a/disk/part_dos.c b/disk/part_dos.c index 3fe901ba1b..37087a6ac3 100644 --- a/disk/part_dos.c +++ b/disk/part_dos.c @@ -35,12 +35,7 @@ #include <ide.h> #include "part_dos.h" -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef HAVE_BLOCK_DEVICE /* Convert char[4] in little endian format to the host format integer */ diff --git a/disk/part_efi.c b/disk/part_efi.c index 7665017330..b3fd0e954d 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -39,13 +39,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) - +#ifdef HAVE_BLOCK_DEVICE /** * efi_crc32() - EFI version of crc32 function * @buf: buffer to calculate crc32 of diff --git a/disk/part_iso.c b/disk/part_iso.c index 4401790af2..49639af269 100644 --- a/disk/part_iso.c +++ b/disk/part_iso.c @@ -25,12 +25,7 @@ #include <command.h> #include "part_iso.h" -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef HAVE_BLOCK_DEVICE /* #define ISO_PART_DEBUG */ diff --git a/disk/part_mac.c b/disk/part_mac.c index cb443ac532..74dc12fe58 100644 --- a/disk/part_mac.c +++ b/disk/part_mac.c @@ -34,12 +34,7 @@ #include <ide.h> #include "part_mac.h" -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef HAVE_BLOCK_DEVICE /* stdlib.h causes some compatibility problems; should fixe these! -- wd */ #ifndef __ldiv_t_defined diff --git a/doc/README.commands b/doc/README.commands index 923418b1a4..9eb367104f 100644 --- a/doc/README.commands +++ b/doc/README.commands @@ -15,24 +15,22 @@ help: Long description. This is a string **** Behind the scene ****** -The structure created is named with a special prefix (__u_boot_list_cmd_) -and placed by the linker in a special section. +The structure created is named with a special prefix and placed by +the linker in a special section using the linker lists mechanism +(see include/linker_lists.h) This makes it possible for the final link to extract all commands compiled into any object code and construct a static array so the -command can be found in an array starting at _u_boot_list_cmd__start. +command array can be iterated over using the linker lists macros. -To ensure that the linker does not discard these symbols when linking -full U-Boot we generate a list of all the commands we have built (based -on the sections mentioned above) and use that to force the linker to -first enter the symbol as undefined in the output object so that there -is then a need for the symbol to be kept (this is the UNDEF_SYM logic in -the Makefile). +The linker lists feature ensures that the linker does not discard +these symbols when linking full U-Boot even though they are not +referenced in the source code as such. If a new board is defined do not forget to define the command section by writing in u-boot.lds ($(TOPDIR)/board/boardname/u-boot.lds) these 3 lines: .u_boot_list : { - #include "u-boot.lst"; + KEEP(*(SORT(.u_boot_list*))); } diff --git a/doc/README.displaying-bmps b/doc/README.displaying-bmps new file mode 100644 index 0000000000..331154166d --- /dev/null +++ b/doc/README.displaying-bmps @@ -0,0 +1,27 @@ +If you are experiencing hangups/data-aborts when trying to display a BMP image, +the following might be relevant to your situation... + +Some architectures cannot handle unaligned memory accesses, and an attempt to +perform one will lead to a data abort. On such architectures it is necessary to +make sure all data is properly aligned, and in many situations simply choosing +a 32 bit aligned address is enough to ensure proper alignment. This is not +always the case when dealing with data that has an internal layout such as a +BMP image: + +BMP images have a header that starts with 2 byte-size fields followed by mostly +32 bit fields. The packed struct that represents this header can be seen below: + +typedef struct bmp_header { + /* Header */ + char signature[2]; + __u32 file_size; + __u32 reserved; + __u32 data_offset; + ... etc +} __attribute__ ((packed)) bmp_header_t; + +When placed in an aligned address such as 0x80a00000, char signature offsets +the __u32 fields into unaligned addresses (in our example 0x80a00002, +0x80a00006, and so on...). When these fields are accessed by U-Boot, a 32 bit +access is generated at a non-32-bit-aligned address, causing a data abort. +The proper alignment for BMP images is therefore: 32-bit-aligned-address + 2. diff --git a/doc/README.falcon b/doc/README.falcon new file mode 100644 index 0000000000..93e855d20e --- /dev/null +++ b/doc/README.falcon @@ -0,0 +1,209 @@ +U-Boot Falcon Mode +==================== + +Introduction +------------ + +This document provides an overview of how to add support for Falcon Mode +to a board. + +Falcon Mode is introduced to speed up the booting process, allowing +to boot a Linux kernel (or whatever image) without a full blown U-Boot. + +Falcon Mode relies on the SPL framework. In fact, to make booting faster, +U-Boot is split into two parts: the SPL (Secondary Program Loader) and U-Boot +image. In most implementations, SPL is used to start U-Boot when booting from +a mass storage, such as NAND or SD-Card. SPL has now support for other media, +and can generally be seen as a way to start an image performing the minimum +required initialization. SPL mainly initializes the RAM controller, and then +copies U-Boot image into the memory. + +The Falcon Mode extends this way allowing to start the Linux kernel directly +from SPL. A new command is added to U-Boot to prepare the parameters that SPL +must pass to the kernel, using ATAGS or Device Tree. + +In normal mode, these parameters are generated each time before +loading the kernel, passing to Linux the address in memory where +the parameters can be read. +With Falcon Mode, this snapshot can be saved into persistent storage and SPL is +informed to load it before running the kernel. + +To boot the kernel, these steps under a Falcon-aware U-Boot are required: + +1. Boot the board into U-Boot. +Use the "spl export" command to generate the kernel parameters area or the DT. +U-Boot runs as when it boots the kernel, but stops before passing the control +to the kernel. + +2. Save the prepared snapshot into persistent media. +The address where to save it must be configured into board configuration +file (CONFIG_CMD_SPL_NAND_OFS for NAND). + +3. Boot the board into Falcon Mode. SPL will load the kernel and copy +the parameters which are saved in the persistent area to the required address. + +It is required to implement a custom mechanism to select if SPL loads U-Boot +or another image. + +The value of a GPIO is a simple way to operate the selection, as well as +reading a character from the SPL console if CONFIG_SPL_CONSOLE is set. + +Falcon Mode is generally activated by setting CONFIG_SPL_OS_BOOT. This tells +SPL that U-Boot is not the only available image that SPL is able to start. + +Configuration +---------------------------- +CONFIG_CMD_SPL Enable the "spl export" command. + The command "spl export" is then available in U-Boot + mode +CONFIG_SYS_SPL_ARGS_ADDR Address in RAM where the parameters must be + copied by SPL. + In most cases, it is <start_of_ram> + 0x100 + +CONFIG_SYS_NAND_SPL_KERNEL_OFFS Offset in NAND where the kernel is stored + +CONFIG_CMD_SPL_NAND_OFS Offset in NAND where the parameters area was saved. + +CONFIG_CMD_SPL_WRITE_SIZE Size of the parameters area to be copied + +CONFIG_SPL_OS_BOOT Activate Falcon Mode. + +Function that a board must implement +------------------------------------ + +void spl_board_prepare_for_linux(void) : optional + Called from SPL before starting the kernel + +spl_start_uboot() : required + Returns "0" if SPL should start the kernel, "1" if U-Boot + must be started. + + +Using spl command +----------------- + +spl - SPL configuration + +Usage: + +spl export <img=atags|fdt> [kernel_addr] [initrd_addr] [fdt_addr ] + +img : "atags" or "fdt" +kernel_addr : kernel is loaded as part of the boot process, but it is not started. + This is the address where a kernel image is stored. +initrd_addr : Address of initial ramdisk + can be set to "-" if fdt_addr without initrd_addr is used +fdt_addr : in case of fdt, the address of the device tree. + +The spl export command does not write to a storage media. The user is +responsible to transfer the gathered information (assembled ATAGS list +or prepared FDT) from temporary storage in RAM into persistant storage +after each run of 'spl export'. Unfortunately the position of temporary +storage can not be predicted nor provided at commandline, it depends +highly on your system setup and your provided data (ATAGS or FDT). +However at the end of an succesful 'spl export' run it will print the +RAM address of temporary storage. +Now the user have to save the generated BLOB from that printed address +to the pre-defined address in persistent storage +(CONFIG_CMD_SPL_NAND_OFS in case of NAND). +The following example shows how to prepare the data for Falcon Mode on +twister board with ATAGS BLOB. + +The "spl export" command is prepared to work with ATAGS and FDT. However, +using FDT is at the moment untested. The ppc port (see a3m071 example +later) prepares the fdt blob with the fdt command instead. + + +Usage on the twister board: +-------------------------------- + +Using mtd names with the following (default) configuration +for mtdparts: + +device nand0 <omap2-nand.0>, # parts = 9 + #: name size offset mask_flags + 0: MLO 0x00080000 0x00000000 0 + 1: u-boot 0x00100000 0x00080000 0 + 2: env1 0x00040000 0x00180000 0 + 3: env2 0x00040000 0x001c0000 0 + 4: kernel 0x00600000 0x00200000 0 + 5: bootparms 0x00040000 0x00800000 0 + 6: splashimg 0x00200000 0x00840000 0 + 7: mini 0x02800000 0x00a40000 0 + 8: rootfs 0x1cdc0000 0x03240000 0 + + +twister => nand read 82000000 kernel + +NAND read: device 0 offset 0x200000, size 0x600000 + 6291456 bytes read: OK + +Now the kernel is in RAM at address 0x82000000 + +twister => spl export atags 0x82000000 +## Booting kernel from Legacy Image at 82000000 ... + Image Name: Linux-3.5.0-rc4-14089-gda0b7f4 + Image Type: ARM Linux Kernel Image (uncompressed) + Data Size: 3654808 Bytes = 3.5 MiB + Load Address: 80008000 + Entry Point: 80008000 + Verifying Checksum ... OK + Loading Kernel Image ... OK +OK +cmdline subcommand not supported +bdt subcommand not supported +Argument image is now in RAM at: 0x80000100 + +The result can be checked at address 0x80000100: + +twister => md 0x80000100 +80000100: 00000005 54410001 00000000 00000000 ......AT........ +80000110: 00000000 00000067 54410009 746f6f72 ....g.....ATroot +80000120: 65642f3d 666e2f76 77722073 73666e20 =/dev/nfs rw nfs + +The parameters generated with this step can be saved into NAND at the offset +0x800000 (value for twister for CONFIG_CMD_SPL_NAND_OFS) + +nand erase.part bootparms +nand write 0x80000100 bootparms 0x4000 + +Now the parameters are stored into the NAND flash at the address +CONFIG_CMD_SPL_NAND_OFS (=0x800000). + +Next time, the board can be started into Falcon Mode moving the +setting the gpio (on twister gpio 55 is used) to kernel mode. + +The kernel is loaded directly by the SPL without passing through U-Boot. + +Example with FDT: a3m071 board +------------------------------- + +To boot the Linux kernel from the SPL, the DT blob (fdt) needs to get +prepard/patched first. U-Boot usually inserts some dynamic values into +the DT binary (blob), e.g. autodetected memory size, MAC addresses, +clocks speeds etc. To generate this patched DT blob, you can use +the following command: + +1. Load fdt blob to SDRAM: +=> tftp 1800000 a3m071/a3m071.dtb + +2. Set bootargs as desired for Linux booting (e.g. flash_mtd): +=> run mtdargs addip2 addtty + +3. Use "fdt" commands to patch the DT blob: +=> fdt addr 1800000 +=> fdt boardsetup +=> fdt chosen + +4. Display patched DT blob (optional): +=> fdt print + +5. Save fdt to NOR flash: +=> erase fc060000 fc07ffff +=> cp.b 1800000 fc060000 10000 +... + + +Falcon Mode was presented at the RMLL 2012. Slides are available at: + +http://schedule2012.rmll.info/IMG/pdf/LSM2012_UbootFalconMode_Babic.pdf diff --git a/doc/README.memory-test b/doc/README.memory-test new file mode 100644 index 0000000000..eb60e8d83e --- /dev/null +++ b/doc/README.memory-test @@ -0,0 +1,98 @@ +The most frequent cause of problems when porting U-Boot to new +hardware, or when using a sloppy port on some board, is memory errors. +In most cases these are not caused by failing hardware, but by +incorrect initialization of the memory controller. So it appears to +be a good idea to always test if the memory is working correctly, +before looking for any other potential causes of any problems. + +U-Boot implements 3 different approaches to perform memory tests: + +1. The get_ram_size() function (see "common/memsize.c"). + + This function is supposed to be used in each and every U-Boot port + determine the presence and actual size of each of the potential + memory banks on this piece of hardware. The code is supposed to be + very fast, so running it for each reboot does not hurt. It is a + little known and generally underrated fact that this code will also + catch 99% of hardware related (i. e. reliably reproducible) memory + errors. It is strongly recommended to always use this function, in + each and every port of U-Boot. + +2. The "mtest" command. + + This is probably the best known memory test utility in U-Boot. + Unfortunately, it is also the most problematic, and the most + useless one. + + There are a number of serious problems with this command: + + - It is terribly slow. Running "mtest" on the whole system RAM + takes a _long_ time before there is any significance in the fact + that no errors have been found so far. + + - It is difficult to configure, and to use. And any errors here + will reliably crash or hang your system. "mtest" is dumb and has + no knowledge about memory ranges that may be in use for other + purposes, like exception code, U-Boot code and data, stack, + malloc arena, video buffer, log buffer, etc. If you let it, it + will happily "test" all such areas, which of course will cause + some problems. + + - It is not easy to configure and use, and a large number of + systems are seriously misconfigured. The original idea was to + test basically the whole system RAM, with only exempting the + areas used by U-Boot itself - on most systems these are the areas + used for the exception vectors (usually at the very lower end of + system memory) and for U-Boot (code, data, etc. - see above; + these are usually at the very upper end of system memory). But + experience has shown that a very large number of ports use + pretty much bogus settings of CONFIG_SYS_MEMTEST_START and + CONFIG_SYS_MEMTEST_END; this results in useless tests (because + the ranges is too small and/or badly located) or in critical + failures (system crashes). + + Because of these issues, the "mtest" command is considered depre- + cated. It should not be enabled in most normal ports of U-Boot, + especially not in production. If you really need a memory test, + then see 1. and 3. above resp. below. + +3. The most thorough memory test facility is available as part of the + POST (Power-On Self Test) sub-system, see "post/drivers/memory.c". + + If you really need to perform memory tests (for example, because + it is mandatory part of your requirement specification), then + enable this test which is generic and should work on all archi- + tectures. + +WARNING: + +It should pointed out that _all_ these memory tests have one +fundamental, unfixable design flaw: they are based on the assumption +that memory errors can be found by writing to and reading from memory. +Unfortunately, this is only true for the relatively harmless, usually +static errors like shorts between data or address lines, unconnected +pins, etc. All the really nasty errors which will first turn your +hair gray, only to make you tear it out later, are dynamical errors, +which usually happen not with simple read or write cycles on the bus, +but when performing back-to-back data transfers in burst mode. Such +accesses usually happen only for certain DMA operations, or for heavy +cache use (instruction fetching, cache flushing). So far I am not +aware of any freely available code that implements a generic, and +efficient, memory test like that. The best known test case to stress +a system like that is to boot Linux with root file system mounted over +NFS, and then build some larger software package natively (say, +compile a Linux kernel on the system) - this will cause enough context +switches, network traffic (and thus DMA transfers from the network +controller), varying RAM use, etc. to trigger any weak spots in this +area. + +Note: An attempt was made once to implement such a test to catch +memory problems on a specific board. The code is pretty much board +specific (for example, it includes setting specific GPIO signals to +provide triggers for an attached logic analyzer), but you can get an +idea how it works: see "examples/standalone/test_burst*". + +Note 2: Ironically enough, the "test_burst" did not catch any RAM +errors, not a single one ever. The problems this code was supposed +to catch did not happen when accessing the RAM, but when reading from +NOR flash. diff --git a/doc/README.ns9750dev b/doc/README.ns9750dev deleted file mode 100644 index 29914406ba..0000000000 --- a/doc/README.ns9750dev +++ /dev/null @@ -1,36 +0,0 @@ -U-Boot Port to the NS9750 DevKit from NetSilicon - -1 Overview -2 Board Configuration -3 Installation - - -1 Overview ----------- - -This port supports these NS9750 features. - -o one UART - -2 Board Configuration ---------------------- - -Switches: -SW10: 4 -SW11: 6,7 -SW16: 6,7,8 -SW17-SW20: 1 -SW4: 3, 6 -SW 1: 1 -SW2: 4 -SW3: 3 -SW8: 3 (rotated by 180 degree!!!!) - -Serial Console is Port B (bottom right port) - -3 Installation --------------- - -Have fun, --- -Markus Pietrek <mpietrek@fsforth.de> diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 2b868e6515..189b8839d5 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -9,83 +9,86 @@ maintain a list of such former fellows, so archeologists can check easily if here is something they might want to dig for... -Board Arch CPU removed Commit last known maintainer/contact -============================================================================= -AMX860 powerpc mpc860 - - Wolfgang Denk <wd@denx.de> -c2mon powerpc mpc855 - - Wolfgang Denk <wd@denx.de> -ETX094 powerpc mpc850 - - Wolfgang Denk <wd@denx.de> -IAD210 powerpc mpc860 - - - -LANTEC powerpc mpc850 - - Wolfgang Denk <wd@denx.de> -SCM powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de> -SX1 arm arm925t - - -TQM85xx powerpc MPC85xx d923a5d5 2012-10-04 Stefan Roese <sr@denx.de> -apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com> -tb0229 mips mips32 3f3110d 2011-12-12 -rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de> -OXC powerpc MPC8240 309a292 2011-12-07 -BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de> -xm250 arm pxa c746cdd 2011-25-11 -pleb2 arm pxa b185a1c 2011-25-11 -cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net> -cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com> -mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com> -ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de> -ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net> -zylonite arm pxa b66521a 2011-09-05 -shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de> -modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org> -lpc2292sodimm arm arm720t d1a067a 2011-09-05 -lart arm sa1100 3d57573 2011-09-05 Alex Züpke <azu@sysgo.de> -impa7 arm arm720t c1f8750 2011-09-05 Marius Gröger <mag@sysgo.de> -gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com> -evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com> -ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gröger <mag@sysgo.de> -dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Züpke <azu@sysgo.de> -SMN42 arm arm720t 6aac646 2011-09-05 -at91rm9200dk arm arm920t 1c85752 2011-07-17 -m501sk arm arm920t b1a2bd4 2011-07-17 -kb9202 arm arm920t 5bd3814 2011-07-17 -csb637 arm arm920t d14af08 2011-07-17 -cmc_pu2 arm arm920t 37a9b4d 2011-07-17 -at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net> -voiceblue arm arm925t 1b793a4 2011-07-17 -smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de> -sbc2410x arm arm920t 1f7f0ed 2011-07-17 -netstar arm arm925t 6ea2405 2011-07-17 -mx1fs2 arm arm920t 6962419 2011-07-17 -lpd7a404 arm lh7a40x 957731e 2011-07-17 -edb9301 arm arm920t 716f7ad 2011-07-17 -edb9302 arm arm920t 716f7ad 2011-07-17 -edb9302a arm arm920t 716f7ad 2011-07-17 -edb9307 arm arm920t 716f7ad 2011-07-17 -edb9307a arm arm920t 716f7ad 2011-07-17 -edb9312 arm arm920t 716f7ad 2011-07-17 -edb9315 arm arm920t 716f7ad 2011-07-17 -edb9315a arm arm920t 716f7ad 2011-07-17 -B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it> -armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com> -assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com> -trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de> -xsengine ARM PXA2xx 4262a7c 2010-10-20 -wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk> -delta ARM PXA2xx 75e2035 2010-10-20 -mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric Bénard <eric@eukrea.com> -barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com> -ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de> -VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de> -NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de> -CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de> -logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at> -CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de> -PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de> -spieval powerpc MPC5200 69434e4 2010-09-19 -smmaco4 powerpc MPC5200 9ddc3af 2010-09-19 -HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de> -GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se> -AmigaOneG3SE 953b7e6 2010-06-23 -suzaku microblaze 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com> -XUPV2P microblaze 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu> -MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de> -adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com> -R5200 ColdFire 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com> -CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com> +Board Arch CPU Commit Removed Last known maintainer/contact +================================================================================================= +ns9750dev arm arm926ejs - - Markus Pietrek <mpietrek@fsforth.de> +AMX860 powerpc mpc860 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> +c2mon powerpc mpc855 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> +ETX094 powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> +IAD210 powerpc mpc860 1b0757e 2012-10-28 - +LANTEC powerpc mpc850 1b0757e 2012-10-28 Wolfgang Denk <wd@denx.de> +SCM powerpc mpc8260 1b0757e 2012-10-28 Wolfgang Grandegger <wg@denx.de> +SX1 arm arm925t 53c4154 2012-10-26 +TQM85xx powerpc MPC85xx d923a5d 2012-10-04 Stefan Roese <sr@denx.de> +apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com> +tb0229 mips mips32 3f3110d 2011-12-12 +rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de> +OXC powerpc MPC8240 309a292 2011-12-07 +BAB7xx powerpc MPC740/MPC750 c53043b 2011-12-07 Frank Gottschling <fgottschling@eltec.de> +xm250 arm pxa c746cdd 2011-25-11 +pleb2 arm pxa b185a1c 2011-25-11 +cradle arm pxa 4e24f8a 2011-25-11 Kyle Harris <kharris@nexus-tech.net> +cerf250 arm pxa a3f1241 2011-25-11 Prakash Kumar <prakash@embedx.com> +mpq101 powerpc mpc85xx e877fab 2011-10-23 Alex Dubov <oakad@yahoo.com> +ixdpg425 arm ixp 0ca8eb7 2011-09-22 Stefan Roese <sr@denx.de> +ixdp425 arm ixp 0ca8eb7 2011-09-22 Kyle Harris <kharris@nexus-tech.net> +zylonite arm pxa b66521a 2011-09-05 +shannon arm sa1100 5df092d 2011-09-05 Rolf Offermanns <rof@sysgo.de> +modnet50 arm arm720t 9c62815 2011-09-05 Thomas Elste <info@elste.org> +lpc2292sodimm arm arm720t d1a067a 2011-09-05 +lart arm sa1100 3d57573 2011-09-05 Alex Züpke <azu@sysgo.de> +impa7 arm arm720t c1f8750 2011-09-05 Marius Gröger <mag@sysgo.de> +gcplus arm sa1100 2c650e2 2011-09-05 George G. Davis <gdavis@mvista.com> +evb4510 arm arm720t 26e670e 2011-09-05 Curt Brune <curt@cucy.com> +ep7312 arm arm720t c8f63b4 2011-09-05 Marius Gröger <mag@sysgo.de> +dnp1110 arm sa1100 fc5e5ce 2011-09-05 Alex Züpke <azu@sysgo.de> +SMN42 arm arm720t 6aac646 2011-09-05 +at91rm9200dk arm arm920t 1c85752 2011-07-17 +m501sk arm arm920t b1a2bd4 2011-07-17 +kb9202 arm arm920t 5bd3814 2011-07-17 +csb637 arm arm920t d14af08 2011-07-17 +cmc_pu2 arm arm920t 37a9b4d 2011-07-17 +at91cap9adk arm arm926ejs b550834 2011-07-17 Stelian Pop <stelian@popies.net> +voiceblue arm arm925t 1b793a4 2011-07-17 +smdk2400 arm arm920t ad218a8 2011-07-17 Gary Jennejohn <garyj@denx.de> +sbc2410x arm arm920t 1f7f0ed 2011-07-17 +netstar arm arm925t 6ea2405 2011-07-17 +mx1fs2 arm arm920t 6962419 2011-07-17 +lpd7a404 arm lh7a40x 957731e 2011-07-17 +edb9301 arm arm920t 716f7ad 2011-07-17 +edb9302 arm arm920t 716f7ad 2011-07-17 +edb9302a arm arm920t 716f7ad 2011-07-17 +edb9307 arm arm920t 716f7ad 2011-07-17 +edb9307a arm arm920t 716f7ad 2011-07-17 +edb9312 arm arm920t 716f7ad 2011-07-17 +edb9315 arm arm920t 716f7ad 2011-07-17 +edb9315a arm arm920t 716f7ad 2011-07-17 +B2 arm s3c44b0 5dcf536 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it> +armadillo arm arm720t be28857 2011-07-16 Rowel Atienza <rowel@diwalabs.com> +assabet arm sa1100 c91e90d 2011-07-16 George G. Davis <gdavis@mvista.com> +trab arm S3C2400 566e5cf 2011-05-01 Gary Jennejohn <garyj@denx.de> +xsengine ARM PXA2xx 4262a7c 2010-10-20 +wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk> +delta ARM PXA2xx 75e2035 2010-10-20 +mp2usb ARM AT91RM2900 ee986e2 2011-01-25 Eric Bénard <eric@eukrea.com> +barco powerpc MPC8245 afaa27b 2010-11-23 Marc Leeman <marc.leeman@barco.com> +ERIC powerpc 405GP d9ba451 2010-11-21 Swen Anderson <sand@peppercon.de> +VoVPN-GW_100MHz powerpc MPC8260 26fe3d2 2010-10-24 Juergen Selent <j.selent@elmeg.de> +NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de> +CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <wd@denx.de> +logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <august.hoerandl@gmx.at> +CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger <wg@denx.de> +PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk <wd@denx.de> +spieval powerpc MPC5200 69434e4 2010-09-19 +smmaco4 powerpc MPC5200 9ddc3af 2010-09-19 +HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk <wd@denx.de> +GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange <thomas@corelatus.se> +AmigaOneG3SE powerpc 74xx_7xx 953b7e6 2010-06-23 +suzaku microblaze - 4f18060 2009-10-03 Yasushi Shoji <yashi@atmark-techno.com> +XUPV2P microblaze - 8fab49e 2008-12-10 Michal Simek <monstr@monstr.eu> +MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwarz <andre.schwarz@matrix-vision.de> +adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi <adrian.filipi@eurotech.com> +R5200 ColdFire - 48ead7a 2008-03-31 Zachary P. Landau <zachary.landau@labxtechnologies.com> +CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs <matthias.fuchs@esd-electronics.com> +PCIPPC2 powerpc MPC740/MPC750 7c9e89b 2013-02-07 Wolfgang Denk <wd@denx.de> +PCIPPC6 powerpc MPC740/MPC750 - - Wolfgang Denk <wd@denx.de> diff --git a/doc/README.silent b/doc/README.silent index 70202cece9..6d90a0ec40 100644 --- a/doc/README.silent +++ b/doc/README.silent @@ -23,4 +23,6 @@ The following actions are taken if "silent" is set at boot time: - When booting a linux kernel, the "bootargs" are fixed up so that the argument "console=" will be in the command line, no matter how - it was set in "bootargs" before. + it was set in "bootargs" before. If you don't want the linux command + line to be affected, define CONFIG_SILENT_U_BOOT_ONLY in your board + config file as well, and this part of the feature will be disabled. diff --git a/doc/SPL/README.am335x-network b/doc/SPL/README.am335x-network new file mode 100644 index 0000000000..e5a198f49c --- /dev/null +++ b/doc/SPL/README.am335x-network @@ -0,0 +1,92 @@ +USING AM335x NETBOOT FEATURE + + Some boards (like TI AM335x based ones) have quite big on-chip RAM and +have support for booting via network in ROM. The following describes +how to setup network booting and then optionally use this support to flash +NAND and bricked (empty) board with only a network cable. + + I. Building the required images + 1. You have to enable generic SPL configuration options (see +docs/README.SPL) as well as CONFIG_SPL_NET_SUPPORT, +CONFIG_ETH_SUPPORT, CONFIG_SPL_LIBGENERIC_SUPPORT and +CONFIG_SPL_LIBCOMMON_SUPPORT in your board configuration file to build +SPL with support for booting over the network. Also you have to enable +the driver for the NIC used and CONFIG_SPL_BOARD_INIT option if your +board needs some board-specific initialization (TI AM335x EVM does). +If you want SPL to use some Vendor Class Identifier (VCI) you can set +one with CONFIG_SPL_NET_VCI_STRING option. am335x_evm configuration +comes with support for network booting preconfigured. + 2. Define CONFIG_BOOTCOMMAND for your board to load and run debrick +script after boot: +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "bootp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +(Or create additional board configuration with such option). + 3. Build U-Boot as usual + $ make <your_board_name> + You will need u-boot.img and spl/u-boot.bin images to perform +network boot. Copy them to u-boot-restore.img and +u-boot-spl-restore.bin respectively to distinguish this version +(with automatic restore running) from the main one. + + II. Host configuration. + 1. Setup DHCP server (recommended server is ISC DHCPd). + - Install DHCP server and setup it to listen on the interface you +chose to connect to the board (usually configured in +/etc/default/dhcpd or /etc/default/isc-dhcp-server). Make sure there +are no other active DHCP servers in the same network segment. + - Edit your dhcpd.conf and subnet declaration matching the address +on the interface. Specify the range of assigned addresses and bootfile +to use. IMPORTANT! Both RBL and SPL use the image filename provided +in the BOOTP reply but obviously they need different images (RBL needs +raw SPL image -- u-boot-spl-restore.bin while SPL needs main U-Boot +image -- u-boot-restore.img). So you have to configure DHCP server to +provide different image filenames to RBL and SPL (and possibly another +one to main U-Boot). This can be done by checking Vendor Class +Identifier (VCI) set by BOOTP client (RBL sets VCI to "DM814x ROM v1.0" +and you can set VCI used by SPL with CONFIG_SPL_NET_VCI_STRING option, +see above). + - If you plan to use TFTP server on another machine you have to set +server-name option to point to it. + - Here is sample configuration for ISC DHCPd, assuming the interface +used to connect to the board is eth0, and it has address 192.168.8.1: + +subnet 192.168.8.0 netmask 255.255.255.0 { + range dynamic-bootp 192.168.8.100 192.168.8.199; + + if substring (option vendor-class-identifier, 0, 10) = "DM814x ROM" { + filename "u-boot-spl-restore.bin"; + } elsif substring (option vendor-class-identifier, 0, 17) = "AM335x U-Boot SPL" { + filename "u-boot-restore.img"; + } else { + filename "uImage"; + } +} + + 2. Setup TFTP server. + Install TFTP server and put image files to it's root directory +(likely /tftpboot or /var/lib/tftpboot or /srv/tftp). You will need +u-boot.img and spl/u-boot-spl-bin files from U-Boot build directory. + + III. Reflashing (debricking) the board. + 1. Write debrick script. You will need to write a script that will +be executed after network boot to perform actual rescue actions. You +can use usual U-Boot commands from this script: tftp to load additional +files, nand erase/nand write to erase/write the NAND flash. + + 2. Create script image from your script. From U-Boot build directory: + +$ ./tools/mkimage -A arm -O U-Boot -C none -T script -d <your script> debrick.scr + +This will create debrick.scr file with your script inside. + + 3. Copy debrick.scr to TFTP root directory. You also need to copy +there all the files your script tries to load via TFTP. Example script +loads u-boot.img and MLO. You have to create these files doing regular +(not restore_flash) build and copy them to tftpboot directory. + + 4. Boot the board from the network, U-Boot will load debrick script +and run it after boot. diff --git a/doc/driver-model/UDM-pci.txt b/doc/driver-model/UDM-pci.txt index b65e9ea73e..c2cf2d5a62 100644 --- a/doc/driver-model/UDM-pci.txt +++ b/doc/driver-model/UDM-pci.txt @@ -240,10 +240,6 @@ III) Analysis of in-tree drivers ---------------- Standard driver, uses indirect functions. - 8) pcippc2/cpc710_pci.c - ----------------------- - Standard driver, uses indirect functions, has two busses. - 9) Marvell/db64360/pci.c ------------------------ Standard driver, uses dword for read/write ops, has two busses. diff --git a/doc/driver-model/UDM-serial.txt b/doc/driver-model/UDM-serial.txt index c6a8ab0521..ef71fea2b8 100644 --- a/doc/driver-model/UDM-serial.txt +++ b/doc/driver-model/UDM-serial.txt @@ -86,7 +86,7 @@ III) Analysis of in-tree drivers 7) ns9750_serial.c ------------------ - No support for CONFIG_SERIAL_MULTI. Simple conversion possible. + Unmaintained port. Code got removed. 8) opencores_yanu.c ------------------- diff --git a/doc/driver-model/UDM-watchdog.txt b/doc/driver-model/UDM-watchdog.txt index 271bd26335..7db328639f 100644 --- a/doc/driver-model/UDM-watchdog.txt +++ b/doc/driver-model/UDM-watchdog.txt @@ -292,11 +292,6 @@ III) Analysis of in-tree drivers Only function proxy call. Code cleanup needed. - 45) board/pcippc2/pcippc2.c - --------------------------- - The driver is standard HW watchdog. Simple conversion is possible. - - 46) board/pcs440ep/pcs440ep.c ----------------------------- The driver is standard HW watchdog. Simple conversion is possible. diff --git a/doc/feature-removal-schedule.txt b/doc/feature-removal-schedule.txt index e04ba2dda5..d9a0cc267b 100644 --- a/doc/feature-removal-schedule.txt +++ b/doc/feature-removal-schedule.txt @@ -7,6 +7,23 @@ file. --------------------------- +What: Remove CONFIG_CMD_MEMTEST from default list +When: Release v2013.07 + +Why: The "mtest" command is of little practical use (if any), and + experience has shown that a large number of board configu- + rations define useless or even dangerous start and end + addresses. If not even the board maintainers are able to + figure out which memory range can be reliably tested, how can + we expect such from the end users? As this problem comes up + repeatedly, we rather do not enable this command by default, + so only people who know what they are doing will be confronted + with it. + +Who: Wolfgang Denk <wd@denx.de> + +--------------------------- + What: Users of the legacy miiphy_* code When: undetermined diff --git a/doc/git-mailrc b/doc/git-mailrc index 6600c150dc..0f23776041 100644 --- a/doc/git-mailrc +++ b/doc/git-mailrc @@ -32,6 +32,7 @@ alias sbabic Stefano Babic <sbabic@denx.de> alias scottwood Scott Wood <scottwood@freescale.com> alias sjg Simon Glass <sjg@chromium.org> alias smcnutt Scott McNutt <smcnutt@psyent.com> +alias sonic Sonic Zhang <sonic.adi@gmail.com> alias stroese Stefan Roese <sr@denx.de> alias vapier Mike Frysinger <vapier@gentoo.org> alias wd Wolfgang Denk <wd@denx.de> @@ -57,7 +58,7 @@ alias ti uboot, Tom Rini <trini@ti.com> alias avr32 uboot, abiessmann -alias bfin uboot, vapier +alias bfin uboot, vapier, sonic alias blackfin bfin alias m68k uboot, jasonjin diff --git a/drivers/block/mvsata_ide.c b/drivers/block/mvsata_ide.c index a88d0f7f83..42c177fe45 100644 --- a/drivers/block/mvsata_ide.c +++ b/drivers/block/mvsata_ide.c @@ -56,8 +56,8 @@ struct mvsata_port_registers { * Sanity checks: * - to compile at all, we need CONFIG_SYS_ATA_BASE_ADDR. * - for ide_preinit to make sense, we need at least one of - * CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE0_OFFSET; - * - for inde_preinit to be called, we need CONFIG_IDE_PREINIT. + * CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET; + * - for ide_preinit to be called, we need CONFIG_IDE_PREINIT. * Fail with an explanation message if these conditions are not met. * This is particularly important for CONFIG_IDE_PREINIT, because * its lack would not cause a build error. diff --git a/drivers/dfu/dfu_mmc.c b/drivers/dfu/dfu_mmc.c index 5d504dffd1..083d74591b 100644 --- a/drivers/dfu/dfu_mmc.c +++ b/drivers/dfu/dfu_mmc.c @@ -21,6 +21,7 @@ #include <common.h> #include <malloc.h> +#include <errno.h> #include <dfu.h> enum dfu_mmc_op { @@ -153,6 +154,10 @@ int dfu_read_medium_mmc(struct dfu_entity *dfu, void *buf, long *len) int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) { + int dev, part; + struct mmc *mmc; + block_dev_desc_t *blk_dev; + disk_partition_t partinfo; char *st; dfu->dev_type = DFU_DEV_MMC; @@ -166,8 +171,34 @@ int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *s) dfu->layout = DFU_FS_FAT; } else if (!strcmp(st, "ext4")) { dfu->layout = DFU_FS_EXT4; + } else if (!strcmp(st, "part")) { + + dfu->layout = DFU_RAW_ADDR; + + dev = simple_strtoul(s, &s, 10); + s++; + part = simple_strtoul(s, &s, 10); + + mmc = find_mmc_device(dev); + if (mmc == NULL || mmc_init(mmc)) { + printf("%s: could not find mmc device #%d!\n", __func__, dev); + return -ENODEV; + } + + blk_dev = &mmc->block_dev; + if (get_partition_info(blk_dev, part, &partinfo) != 0) { + printf("%s: could not find partition #%d on mmc device #%d!\n", + __func__, part, dev); + return -ENODEV; + } + + dfu->data.mmc.lba_start = partinfo.start; + dfu->data.mmc.lba_size = partinfo.size; + dfu->data.mmc.lba_blk_size = partinfo.blksz; + } else { printf("%s: Memory layout (%s) not supported!\n", __func__, st); + return -ENODEV; } if (dfu->layout == DFU_FS_EXT4 || dfu->layout == DFU_FS_FAT) { diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 2d97b4f1e4..9df1e2632f 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -39,6 +39,7 @@ COBJS-$(CONFIG_SANDBOX_GPIO) += sandbox.o COBJS-$(CONFIG_SPEAR_GPIO) += spear_gpio.o COBJS-$(CONFIG_TEGRA_GPIO) += tegra_gpio.o COBJS-$(CONFIG_DA8XX_GPIO) += da8xx_gpio.o +COBJS-$(CONFIG_DM644X_GPIO) += da8xx_gpio.o COBJS-$(CONFIG_ALTERA_PIO) += altera_pio.o COBJS-$(CONFIG_MPC83XX_GPIO) += mpc83xx_gpio.o COBJS-$(CONFIG_SH_GPIO_PFC) += sh_pfc.o diff --git a/drivers/gpio/da8xx_gpio.c b/drivers/gpio/da8xx_gpio.c index 84d2b77d92..76648d27d4 100644 --- a/drivers/gpio/da8xx_gpio.c +++ b/drivers/gpio/da8xx_gpio.c @@ -31,8 +31,141 @@ static struct gpio_registry { char name[GPIO_NAME_SIZE]; } gpio_registry[MAX_NUM_GPIOS]; +#if defined(CONFIG_SOC_DA8XX) #define pinmux(x) (&davinci_syscfg_regs->pinmux[x]) +#if defined(CONFIG_SOC_DA8XX) && !defined(CONFIG_SOC_DA850) +static const struct pinmux_config gpio_pinmux[] = { + { pinmux(13), 8, 6 }, /* GP0[0] */ + { pinmux(13), 8, 7 }, + { pinmux(14), 8, 0 }, + { pinmux(14), 8, 1 }, + { pinmux(14), 8, 2 }, + { pinmux(14), 8, 3 }, + { pinmux(14), 8, 4 }, + { pinmux(14), 8, 5 }, + { pinmux(14), 8, 6 }, + { pinmux(14), 8, 7 }, + { pinmux(15), 8, 0 }, + { pinmux(15), 8, 1 }, + { pinmux(15), 8, 2 }, + { pinmux(15), 8, 3 }, + { pinmux(15), 8, 4 }, + { pinmux(15), 8, 5 }, + { pinmux(15), 8, 6 }, /* GP1[0] */ + { pinmux(15), 8, 7 }, + { pinmux(16), 8, 0 }, + { pinmux(16), 8, 1 }, + { pinmux(16), 8, 2 }, + { pinmux(16), 8, 3 }, + { pinmux(16), 8, 4 }, + { pinmux(16), 8, 5 }, + { pinmux(16), 8, 6 }, + { pinmux(16), 8, 7 }, + { pinmux(17), 8, 0 }, + { pinmux(17), 8, 1 }, + { pinmux(17), 8, 2 }, + { pinmux(17), 8, 3 }, + { pinmux(17), 8, 4 }, + { pinmux(17), 8, 5 }, + { pinmux(17), 8, 6 }, /* GP2[0] */ + { pinmux(17), 8, 7 }, + { pinmux(18), 8, 0 }, + { pinmux(18), 8, 1 }, + { pinmux(18), 8, 2 }, + { pinmux(18), 8, 3 }, + { pinmux(18), 8, 4 }, + { pinmux(18), 8, 5 }, + { pinmux(18), 8, 6 }, + { pinmux(18), 8, 7 }, + { pinmux(19), 8, 0 }, + { pinmux(9), 8, 2 }, + { pinmux(9), 8, 3 }, + { pinmux(9), 8, 4 }, + { pinmux(9), 8, 5 }, + { pinmux(9), 8, 6 }, + { pinmux(10), 8, 1 }, /* GP3[0] */ + { pinmux(10), 8, 2 }, + { pinmux(10), 8, 3 }, + { pinmux(10), 8, 4 }, + { pinmux(10), 8, 5 }, + { pinmux(10), 8, 6 }, + { pinmux(10), 8, 7 }, + { pinmux(11), 8, 0 }, + { pinmux(11), 8, 1 }, + { pinmux(11), 8, 2 }, + { pinmux(11), 8, 3 }, + { pinmux(11), 8, 4 }, + { pinmux(9), 8, 7 }, + { pinmux(2), 8, 6 }, + { pinmux(11), 8, 5 }, + { pinmux(11), 8, 6 }, + { pinmux(12), 8, 4 }, /* GP4[0] */ + { pinmux(12), 8, 5 }, + { pinmux(12), 8, 6 }, + { pinmux(12), 8, 7 }, + { pinmux(13), 8, 0 }, + { pinmux(13), 8, 1 }, + { pinmux(13), 8, 2 }, + { pinmux(13), 8, 3 }, + { pinmux(13), 8, 4 }, + { pinmux(13), 8, 5 }, + { pinmux(11), 8, 7 }, + { pinmux(12), 8, 0 }, + { pinmux(12), 8, 1 }, + { pinmux(12), 8, 2 }, + { pinmux(12), 8, 3 }, + { pinmux(9), 8, 1 }, + { pinmux(7), 8, 3 }, /* GP5[0] */ + { pinmux(7), 8, 4 }, + { pinmux(7), 8, 5 }, + { pinmux(7), 8, 6 }, + { pinmux(7), 8, 7 }, + { pinmux(8), 8, 0 }, + { pinmux(8), 8, 1 }, + { pinmux(8), 8, 2 }, + { pinmux(8), 8, 3 }, + { pinmux(8), 8, 4 }, + { pinmux(8), 8, 5 }, + { pinmux(8), 8, 6 }, + { pinmux(8), 8, 7 }, + { pinmux(9), 8, 0 }, + { pinmux(7), 8, 1 }, + { pinmux(7), 8, 2 }, + { pinmux(5), 8, 1 }, /* GP6[0] */ + { pinmux(5), 8, 2 }, + { pinmux(5), 8, 3 }, + { pinmux(5), 8, 4 }, + { pinmux(5), 8, 5 }, + { pinmux(5), 8, 6 }, + { pinmux(5), 8, 7 }, + { pinmux(6), 8, 0 }, + { pinmux(6), 8, 1 }, + { pinmux(6), 8, 2 }, + { pinmux(6), 8, 3 }, + { pinmux(6), 8, 4 }, + { pinmux(6), 8, 5 }, + { pinmux(6), 8, 6 }, + { pinmux(6), 8, 7 }, + { pinmux(7), 8, 0 }, + { pinmux(1), 8, 0 }, /* GP7[0] */ + { pinmux(1), 8, 1 }, + { pinmux(1), 8, 2 }, + { pinmux(1), 8, 3 }, + { pinmux(1), 8, 4 }, + { pinmux(1), 8, 5 }, + { pinmux(1), 8, 6 }, + { pinmux(1), 8, 7 }, + { pinmux(2), 8, 0 }, + { pinmux(2), 8, 1 }, + { pinmux(2), 8, 2 }, + { pinmux(2), 8, 3 }, + { pinmux(2), 8, 4 }, + { pinmux(2), 8, 5 }, + { pinmux(0), 1, 0 }, + { pinmux(0), 1, 1 }, +}; +#else /* CONFIG_SOC_DA8XX && CONFIG_SOC_DA850 */ static const struct pinmux_config gpio_pinmux[] = { { pinmux(1), 8, 7 }, /* GP0[0] */ { pinmux(1), 8, 6 }, @@ -179,6 +312,10 @@ static const struct pinmux_config gpio_pinmux[] = { { pinmux(18), 8, 3 }, { pinmux(18), 8, 2 }, }; +#endif /* CONFIG_SOC_DA8XX && !CONFIG_SOC_DA850 */ +#else /* !CONFIG_SOC_DA8XX */ +#define davinci_configure_pin_mux(a, b) +#endif /* CONFIG_SOC_DA8XX */ int gpio_request(unsigned gpio, const char *label) { diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index 769a2ba5ba..46d25061ee 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -86,13 +86,6 @@ static int GetI2CSDA(void) #endif } -#if 0 -static void SetI2CSDA(int x) -{ - rGPEDAT = (rGPEDAT & ~0x8000) | (x & 1) << 15; -} -#endif - static void SetI2CSCL(int x) { struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); @@ -331,7 +324,7 @@ static int i2c_transfer(struct s3c24x0_i2c *i2c, writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP, &i2c->iicstat); i = 0; - while ((i < data_len) && (result = I2C_OK)) { + while ((i < data_len) && (result == I2C_OK)) { result = WaitForXfer(i2c); writel(data[i], &i2c->iicds); ReadWriteByte(i2c); @@ -343,17 +336,16 @@ static int i2c_transfer(struct s3c24x0_i2c *i2c, result = WaitForXfer(i2c); /* send STOP */ - writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat); + writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat); ReadWriteByte(i2c); break; case I2C_READ: if (addr && addr_len) { - writel(I2C_MODE_MT | I2C_TXRX_ENA, &i2c->iicstat); writel(chip, &i2c->iicds); /* send START */ - writel(readl(&i2c->iicstat) | I2C_START_STOP, - &i2c->iicstat); + writel(I2C_MODE_MT | I2C_TXRX_ENA | I2C_START_STOP, + &i2c->iicstat); result = WaitForXfer(i2c); if (IsACK(i2c)) { i = 0; @@ -387,11 +379,10 @@ static int i2c_transfer(struct s3c24x0_i2c *i2c, } } else { - writel(I2C_MODE_MR | I2C_TXRX_ENA, &i2c->iicstat); writel(chip, &i2c->iicds); /* send START */ - writel(readl(&i2c->iicstat) | I2C_START_STOP, - &i2c->iicstat); + writel(I2C_MODE_MR | I2C_TXRX_ENA | I2C_START_STOP, + &i2c->iicstat); result = WaitForXfer(i2c); if (IsACK(i2c)) { diff --git a/drivers/i2c/tegra_i2c.c b/drivers/i2c/tegra_i2c.c index efc77fa910..ca71cd3ee4 100644 --- a/drivers/i2c/tegra_i2c.c +++ b/drivers/i2c/tegra_i2c.c @@ -46,6 +46,7 @@ struct i2c_bus { struct i2c_control *control; struct i2c_ctlr *regs; int is_dvc; /* DVC type, rather than I2C */ + int is_scs; /* single clock source (T114+) */ int inited; /* bus is inited */ }; @@ -88,7 +89,28 @@ static void i2c_init_controller(struct i2c_bus *i2c_bus) * 16 to get the right frequency. */ clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH, - i2c_bus->speed * 2 * 8); + i2c_bus->speed * 2 * 8); + + if (i2c_bus->is_scs) { + /* + * T114 I2C went to a single clock source for standard/fast and + * HS clock speeds. The new clock rate setting calculation is: + * SCL = CLK_SOURCE.I2C / + * (CLK_MULT_STD_FAST_MODE * (I2C_CLK_DIV_STD_FAST_MODE+1) * + * I2C FREQUENCY DIVISOR) as per the T114 TRM (sec 30.3.1). + * + * NOTE: We do this here, after the initial clock/pll start, + * because if we read the clk_div reg before the controller + * is running, we hang, and we need it for the new calc. + */ + int clk_div_stdfst_mode = readl(&i2c_bus->regs->clk_div) >> 16; + debug("%s: CLK_DIV_STD_FAST_MODE setting = %d\n", __func__, + clk_div_stdfst_mode); + + clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH, + CLK_MULT_STD_FAST_MODE * (clk_div_stdfst_mode + 1) * + i2c_bus->speed * 2); + } /* Reset I2C controller. */ i2c_reset_controller(i2c_bus); @@ -352,10 +374,11 @@ static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus) * @param node_list list of nodes to process (any <=0 are ignored) * @param count number of nodes to process * @param is_dvc 1 if these are DVC ports, 0 if standard I2C + * @param is_scs 1 if this HW uses a single clock source (T114+) * @return 0 if ok, -1 on error */ static int process_nodes(const void *blob, int node_list[], int count, - int is_dvc) + int is_dvc, int is_scs) { struct i2c_bus *i2c_bus; int i; @@ -375,6 +398,8 @@ static int process_nodes(const void *blob, int node_list[], int count, return -1; } + i2c_bus->is_scs = is_scs; + i2c_bus->is_dvc = is_dvc; if (is_dvc) { i2c_bus->control = @@ -403,18 +428,25 @@ void i2c_init_board(void) const void *blob = gd->fdt_blob; int count; - /* First get the normal i2c ports */ + /* First check for newer (T114+) I2C ports */ + count = fdtdec_find_aliases_for_id(blob, "i2c", + COMPAT_NVIDIA_TEGRA114_I2C, node_list, + TEGRA_I2C_NUM_CONTROLLERS); + if (process_nodes(blob, node_list, count, 0, 1)) + return; + + /* Now get the older (T20/T30) normal I2C ports */ count = fdtdec_find_aliases_for_id(blob, "i2c", COMPAT_NVIDIA_TEGRA20_I2C, node_list, TEGRA_I2C_NUM_CONTROLLERS); - if (process_nodes(blob, node_list, count, 0)) + if (process_nodes(blob, node_list, count, 0, 0)) return; /* Now look for dvc ports */ count = fdtdec_add_aliases_for_id(blob, "i2c", COMPAT_NVIDIA_TEGRA20_DVC, node_list, TEGRA_I2C_NUM_CONTROLLERS); - if (process_nodes(blob, node_list, count, 1)) + if (process_nodes(blob, node_list, count, 1, 0)) return; } diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 65791aa218..1d6faa2a92 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -43,6 +43,7 @@ COBJS-$(CONFIG_MXS_MMC) += mxsmmc.o COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o COBJS-$(CONFIG_SDHCI) += sdhci.o +COBJS-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o diff --git a/drivers/mmc/arm_pl180_mmci.c b/drivers/mmc/arm_pl180_mmci.c index af1380a455..ab2e81e5d4 100644 --- a/drivers/mmc/arm_pl180_mmci.c +++ b/drivers/mmc/arm_pl180_mmci.c @@ -377,6 +377,7 @@ int arm_pl180_mmci_init(struct pl180_mmc_host *host) dev->set_ios = host_set_ios; dev->init = mmc_host_reset; dev->getcd = NULL; + dev->getwp = NULL; dev->host_caps = host->caps; dev->voltages = host->voltages; dev->f_min = host->clock_min; diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c new file mode 100644 index 0000000000..b0afc3c9ce --- /dev/null +++ b/drivers/mmc/bcm2835_sdhci.c @@ -0,0 +1,189 @@ +/* + * This code was extracted from: + * git://github.com/gonzoua/u-boot-pi.git master + * and hence presumably (C) 2012 Oleksandr Tymoshenko + * + * Tweaks for U-Boot upstreaming + * (C) 2012 Stephen Warren + * + * Portions (e.g. read/write macros, concepts for back-to-back register write + * timing workarounds) obviously extracted from the Linux kernel at: + * https://github.com/raspberrypi/linux.git rpi-3.6.y + * + * The Linux kernel code has the following (c) and license, which is hence + * propagated to Oleksandr's tree and here: + * + * Support for SDHCI device on 2835 + * Based on sdhci-bcm2708.c (c) 2010 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * SDHCI platform device - Arasan SD controller in BCM2708 + * + * Inspired by sdhci-pci.c, by Pierre Ossman + */ + +#include <common.h> +#include <malloc.h> +#include <sdhci.h> + +/* 400KHz is max freq for card ID etc. Use that as min */ +#define MIN_FREQ 400000 + +struct bcm2835_sdhci_host { + struct sdhci_host host; + uint twoticks_delay; + ulong last_write; +}; + +static inline struct bcm2835_sdhci_host *to_bcm(struct sdhci_host *host) +{ + return (struct bcm2835_sdhci_host *)host; +} + +static inline void bcm2835_sdhci_raw_writel(struct sdhci_host *host, u32 val, + int reg) +{ + struct bcm2835_sdhci_host *bcm_host = to_bcm(host); + + /* + * The Arasan has a bugette whereby it may lose the content of + * successive writes to registers that are within two SD-card clock + * cycles of each other (a clock domain crossing problem). + * It seems, however, that the data register does not have this problem. + * (Which is just as well - otherwise we'd have to nobble the DMA engine + * too) + */ + while (get_timer(bcm_host->last_write) < bcm_host->twoticks_delay) + ; + + writel(val, host->ioaddr + reg); + bcm_host->last_write = get_timer(0); +} + +static inline u32 bcm2835_sdhci_raw_readl(struct sdhci_host *host, int reg) +{ + return readl(host->ioaddr + reg); +} + +static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg) +{ + bcm2835_sdhci_raw_writel(host, val, reg); +} + +static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg) +{ + static u32 shadow; + u32 oldval = (reg == SDHCI_COMMAND) ? shadow : + bcm2835_sdhci_raw_readl(host, reg & ~3); + u32 word_num = (reg >> 1) & 1; + u32 word_shift = word_num * 16; + u32 mask = 0xffff << word_shift; + u32 newval = (oldval & ~mask) | (val << word_shift); + + if (reg == SDHCI_TRANSFER_MODE) + shadow = newval; + else + bcm2835_sdhci_raw_writel(host, newval, reg & ~3); +} + +static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg) +{ + u32 oldval = bcm2835_sdhci_raw_readl(host, reg & ~3); + u32 byte_num = reg & 3; + u32 byte_shift = byte_num * 8; + u32 mask = 0xff << byte_shift; + u32 newval = (oldval & ~mask) | (val << byte_shift); + + bcm2835_sdhci_raw_writel(host, newval, reg & ~3); +} + +static u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg) +{ + u32 val = bcm2835_sdhci_raw_readl(host, reg); + + return val; +} + +static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg) +{ + u32 val = bcm2835_sdhci_raw_readl(host, (reg & ~3)); + u32 word_num = (reg >> 1) & 1; + u32 word_shift = word_num * 16; + u32 word = (val >> word_shift) & 0xffff; + + return word; +} + +static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg) +{ + u32 val = bcm2835_sdhci_raw_readl(host, (reg & ~3)); + u32 byte_num = reg & 3; + u32 byte_shift = byte_num * 8; + u32 byte = (val >> byte_shift) & 0xff; + + return byte; +} + +static const struct sdhci_ops bcm2835_ops = { + .write_l = bcm2835_sdhci_writel, + .write_w = bcm2835_sdhci_writew, + .write_b = bcm2835_sdhci_writeb, + .read_l = bcm2835_sdhci_readl, + .read_w = bcm2835_sdhci_readw, + .read_b = bcm2835_sdhci_readb, +}; + +int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq) +{ + struct bcm2835_sdhci_host *bcm_host; + struct sdhci_host *host; + + bcm_host = malloc(sizeof(*bcm_host)); + if (!bcm_host) { + printf("sdhci_host malloc fail!\n"); + return 1; + } + + /* + * See the comments in bcm2835_sdhci_raw_writel(). + * + * This should probably be dynamically calculated based on the actual + * frequency. However, this is the longest we'll have to wait, and + * doesn't seem to slow access down too much, so the added complexity + * doesn't seem worth it for now. + * + * 1/MIN_FREQ is (max) time per tick of eMMC clock. + * 2/MIN_FREQ is time for two ticks. + * Multiply by 1000000 to get uS per two ticks. + * +1 for hack rounding. + */ + bcm_host->twoticks_delay = ((2 * 1000000) / MIN_FREQ) + 1; + bcm_host->last_write = 0; + + host = &bcm_host->host; + host->name = "bcm2835_sdhci"; + host->ioaddr = (void *)regbase; + host->quirks = SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_BROKEN_R1B | + SDHCI_QUIRK_WAIT_SEND_CMD; + host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + host->ops = &bcm2835_ops; + + host->version = sdhci_readw(host, SDHCI_HOST_VERSION); + add_sdhci(host, emmc_freq, MIN_FREQ); + + return 0; +} diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c index 8d59d46c64..26311741f5 100644 --- a/drivers/mmc/bfin_sdh.c +++ b/drivers/mmc/bfin_sdh.c @@ -19,9 +19,7 @@ #include <asm/mach-common/bits/sdh.h> #include <asm/mach-common/bits/dma.h> -#if defined(__ADSPBF50x__) || defined(__ADSPBF51x__) -# define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CONTROL -# define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CONTROL +#if defined(__ADSPBF50x__) || defined(__ADSPBF51x__) || defined(__ADSPBF60x__) # define bfin_read_SDH_CLK_CTL bfin_read_RSI_CLK_CONTROL # define bfin_write_SDH_CLK_CTL bfin_write_RSI_CLK_CONTROL # define bfin_write_SDH_ARGUMENT bfin_write_RSI_ARGUMENT @@ -38,10 +36,21 @@ # define bfin_write_SDH_STATUS_CLR bfin_write_RSI_STATUSCL # define bfin_read_SDH_CFG bfin_read_RSI_CONFIG # define bfin_write_SDH_CFG bfin_write_RSI_CONFIG +# if defined(__ADSPBF60x__) +# define bfin_read_SDH_BLK_SIZE bfin_read_RSI_BLKSZ +# define bfin_write_SDH_BLK_SIZE bfin_write_RSI_BLKSZ +# define bfin_write_DMA_START_ADDR bfin_write_DMA10_START_ADDR +# define bfin_write_DMA_X_COUNT bfin_write_DMA10_X_COUNT +# define bfin_write_DMA_X_MODIFY bfin_write_DMA10_X_MODIFY +# define bfin_write_DMA_CONFIG bfin_write_DMA10_CONFIG +# else +# define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CONTROL +# define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CONTROL # define bfin_write_DMA_START_ADDR bfin_write_DMA4_START_ADDR # define bfin_write_DMA_X_COUNT bfin_write_DMA4_X_COUNT # define bfin_write_DMA_X_MODIFY bfin_write_DMA4_X_MODIFY # define bfin_write_DMA_CONFIG bfin_write_DMA4_CONFIG +# endif # define PORTMUX_PINS \ { P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0 } #elif defined(__ADSPBF54x__) @@ -70,6 +79,9 @@ sdh_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd) sdh_cmd |= CMD_RSP; if (flags & MMC_RSP_136) sdh_cmd |= CMD_L_RSP; +#ifdef RSI_BLKSZ + sdh_cmd |= CMD_DATA0_BUSY; +#endif bfin_write_SDH_ARGUMENT(arg); bfin_write_SDH_COMMAND(sdh_cmd); @@ -104,6 +116,12 @@ sdh_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd) bfin_write_SDH_STATUS_CLR(CMD_SENT_STAT | CMD_RESP_END_STAT | CMD_TIMEOUT_STAT | CMD_CRC_FAIL_STAT); +#ifdef RSI_BLKSZ + /* wait till card ready */ + while (!(bfin_read_RSI_ESTAT() & SD_CARD_READY)) + continue; + bfin_write_RSI_ESTAT(SD_CARD_READY); +#endif return ret; } @@ -113,16 +131,19 @@ static int sdh_setup_data(struct mmc *mmc, struct mmc_data *data) { u16 data_ctl = 0; u16 dma_cfg = 0; - int ret = 0; unsigned long data_size = data->blocksize * data->blocks; /* Don't support write yet. */ if (data->flags & MMC_DATA_WRITE) return UNUSABLE_ERR; +#ifndef RSI_BLKSZ data_ctl |= ((ffs(data_size) - 1) << 4); +#else + bfin_write_SDH_BLK_SIZE(data_size); +#endif data_ctl |= DTX_DIR; bfin_write_SDH_DATA_CTL(data_ctl); - dma_cfg = WDSIZE_32 | RESTART | WNR | DMAEN; + dma_cfg = WDSIZE_32 | PSIZE_32 | RESTART | WNR | DMAEN; bfin_write_SDH_DATA_TIMER(-1); @@ -137,7 +158,7 @@ static int sdh_setup_data(struct mmc *mmc, struct mmc_data *data) /* kick off transfer */ bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E); - return ret; + return 0; } @@ -147,13 +168,23 @@ static int bfin_sdh_request(struct mmc *mmc, struct mmc_cmd *cmd, u32 status; int ret = 0; + if (data) { + ret = sdh_setup_data(mmc, data); + if (ret) + return ret; + } + ret = sdh_send_cmd(mmc, cmd); if (ret) { + bfin_write_SDH_COMMAND(0); + bfin_write_DMA_CONFIG(0); + bfin_write_SDH_DATA_CTL(0); + SSYNC(); printf("sending CMD%d failed\n", cmd->cmdidx); return ret; } + if (data) { - ret = sdh_setup_data(mmc, data); do { udelay(1); status = bfin_read_SDH_STATUS(); @@ -208,10 +239,12 @@ static void bfin_sdh_set_ios(struct mmc *mmc) if (mmc->bus_width == 4) { cfg = bfin_read_SDH_CFG(); - cfg &= ~0x80; - cfg |= 0x40; +#ifndef RSI_BLKSZ + cfg &= ~PD_SDDAT3; +#endif + cfg |= PUP_SDDAT3; bfin_write_SDH_CFG(cfg); - clk_ctl |= WIDE_BUS; + clk_ctl |= WIDE_BUS_4; } bfin_write_SDH_CLK_CTL(clk_ctl); sdh_set_clk(mmc->clock); @@ -220,20 +253,23 @@ static void bfin_sdh_set_ios(struct mmc *mmc) static int bfin_sdh_init(struct mmc *mmc) { const unsigned short pins[] = PORTMUX_PINS; - u16 pwr_ctl = 0; + int ret; /* Initialize sdh controller */ - peripheral_request_list(pins, "bfin_sdh"); + ret = peripheral_request_list(pins, "bfin_sdh"); + if (ret < 0) + return ret; #if defined(__ADSPBF54x__) bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1); #endif bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN); /* Disable card detect pin */ bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | 0x60); - - pwr_ctl |= ROD_CTL; - pwr_ctl |= PWR_ON; - bfin_write_SDH_PWR_CTL(pwr_ctl); +#ifndef RSI_BLKSZ + bfin_write_SDH_PWR_CTL(PWR_ON | ROD_CTL); +#else + bfin_write_SDH_CFG(bfin_read_SDH_CFG() | PWR_ON); +#endif return 0; } @@ -251,6 +287,7 @@ int bfin_mmc_init(bd_t *bis) mmc->set_ios = bfin_sdh_set_ios; mmc->init = bfin_sdh_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->host_caps = MMC_MODE_4BIT; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; diff --git a/drivers/mmc/davinci_mmc.c b/drivers/mmc/davinci_mmc.c index ee8f2614de..e2379e326e 100644 --- a/drivers/mmc/davinci_mmc.c +++ b/drivers/mmc/davinci_mmc.c @@ -388,6 +388,7 @@ int davinci_mmc_init(bd_t *bis, struct davinci_mmc *host) mmc->set_ios = dmmc_set_ios; mmc->init = dmmc_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->f_min = 200000; mmc->f_max = 25000000; diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index b90f3e7769..54b5363169 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -552,6 +552,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) mmc->set_ios = esdhc_set_ios; mmc->init = esdhc_init; mmc->getcd = esdhc_getcd; + mmc->getwp = NULL; voltage_caps = 0; caps = regs->hostcapblt; diff --git a/drivers/mmc/ftsdc010_esdhc.c b/drivers/mmc/ftsdc010_esdhc.c index f1702fe33b..42f0e0ce55 100644 --- a/drivers/mmc/ftsdc010_esdhc.c +++ b/drivers/mmc/ftsdc010_esdhc.c @@ -666,6 +666,7 @@ int ftsdc010_mmc_init(int dev_index) mmc->set_ios = ftsdc010_set_ios; mmc->init = ftsdc010_core_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index 67b2dbe8d4..70a9f91c8d 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -349,6 +349,7 @@ int atmel_mci_init(void *regs) mmc->set_ios = mci_set_ios; mmc->init = mci_init; mmc->getcd = NULL; + mmc->getwp = NULL; /* need to be able to pass these in on a board by board basis */ mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 72e8ce6da4..d732581eb8 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -40,6 +40,27 @@ static struct list_head mmc_devices; static int cur_dev_num = -1; +int __weak board_mmc_getwp(struct mmc *mmc) +{ + return -1; +} + +int mmc_getwp(struct mmc *mmc) +{ + int wp; + + wp = board_mmc_getwp(mmc); + + if (wp < 0) { + if (mmc->getwp) + wp = mmc->getwp(mmc); + else + wp = 0; + } + + return wp; +} + int __board_mmc_getcd(struct mmc *mmc) { return -1; } @@ -675,8 +696,12 @@ int mmc_getcd(struct mmc *mmc) cd = board_mmc_getcd(mmc); - if ((cd < 0) && mmc->getcd) - cd = mmc->getcd(mmc); + if (cd < 0) { + if (mmc->getcd) + cd = mmc->getcd(mmc); + else + cd = 1; + } return cd; } diff --git a/drivers/mmc/mmc_spi.c b/drivers/mmc/mmc_spi.c index 11ba532b0c..fe6a5a166d 100644 --- a/drivers/mmc/mmc_spi.c +++ b/drivers/mmc/mmc_spi.c @@ -273,6 +273,7 @@ struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode) mmc->set_ios = mmc_spi_set_ios; mmc->init = mmc_spi_init_p; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->host_caps = MMC_MODE_SPI; mmc->voltages = MMC_SPI_VOLTAGE; diff --git a/drivers/mmc/mxcmmc.c b/drivers/mmc/mxcmmc.c index d58c18bc2a..4f99617b9a 100644 --- a/drivers/mmc/mxcmmc.c +++ b/drivers/mmc/mxcmmc.c @@ -499,6 +499,7 @@ static int mxcmci_initialize(bd_t *bis) mmc->set_ios = mxcmci_set_ios; mmc->init = mxcmci_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->host_caps = MMC_MODE_4BIT; host->base = (struct mxcmci_regs *)CONFIG_MXC_MCI_REGS_BASE; diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index a72f66cc7a..a89660f130 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -53,12 +53,6 @@ struct mxsmmc_priv { struct mxs_dma_desc *desc; }; -#if defined(CONFIG_MX23) -static const unsigned int mxsmmc_id_offset = 1; -#elif defined(CONFIG_MX28) -static const unsigned int mxsmmc_id_offset = 0; -#endif - #define MXSMMC_MAX_TIMEOUT 10000 #define MXSMMC_SMALL_TRANSFER 512 @@ -137,7 +131,7 @@ static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data) priv->desc->cmd.data |= MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM | (data_count << MXS_DMA_DESC_BYTES_OFFSET); - dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id + mxsmmc_id_offset; + dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id; mxs_dma_desc_append(dmach, priv->desc); if (mxs_dma_go(dmach)) { bounce_buffer_stop(&bbstate); @@ -390,15 +384,9 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int)) struct mmc *mmc = NULL; struct mxsmmc_priv *priv = NULL; int ret; -#if defined(CONFIG_MX23) - const unsigned int mxsmmc_max_id = 2; - const unsigned int mxsmmc_clk_id = 0; -#elif defined(CONFIG_MX28) - const unsigned int mxsmmc_max_id = 4; - const unsigned int mxsmmc_clk_id = id; -#endif + const unsigned int mxsmmc_clk_id = mxs_ssp_clock_by_bus(id); - if (id >= mxsmmc_max_id) + if (!mxs_ssp_bus_id_valid(id)) return -ENODEV; mmc = malloc(sizeof(struct mmc)); @@ -418,7 +406,7 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int)) return -ENOMEM; } - ret = mxs_dma_init_channel(id + mxsmmc_id_offset); + ret = mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + id); if (ret) return ret; @@ -432,6 +420,7 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int), int (*cd)(int)) mmc->set_ios = mxsmmc_set_ios; mmc->init = mxsmmc_init; mmc->getcd = NULL; + mmc->getwp = NULL; mmc->priv = priv; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index afd9b30b51..166744c320 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -30,6 +30,7 @@ #include <twl4030.h> #include <twl6030.h> #include <twl6035.h> +#include <asm/gpio.h> #include <asm/io.h> #include <asm/arch/mmc_host_def.h> #include <asm/arch/sys_proto.h> @@ -38,30 +39,71 @@ #define SYSCTL_SRC (1 << 25) #define SYSCTL_SRD (1 << 26) +struct omap_hsmmc_data { + struct hsmmc *base_addr; + int cd_gpio; + int wp_gpio; +}; + /* If we fail after 1 second wait, something is really bad */ #define MAX_RETRY_MS 1000 static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size); static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, unsigned int siz); -static struct mmc hsmmc_dev[2]; +static struct mmc hsmmc_dev[3]; +static struct omap_hsmmc_data hsmmc_dev_data[3]; + +#if (defined(CONFIG_OMAP_GPIO) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_GPIO_SUPPORT)) +static int omap_mmc_setup_gpio_in(int gpio, const char *label) +{ + if (!gpio_is_valid(gpio)) + return -1; + + if (gpio_request(gpio, label) < 0) + return -1; + + if (gpio_direction_input(gpio) < 0) + return -1; + + return gpio; +} + +static int omap_mmc_getcd(struct mmc *mmc) +{ + int cd_gpio = ((struct omap_hsmmc_data *)mmc->priv)->cd_gpio; + return gpio_get_value(cd_gpio); +} + +static int omap_mmc_getwp(struct mmc *mmc) +{ + int wp_gpio = ((struct omap_hsmmc_data *)mmc->priv)->wp_gpio; + return gpio_get_value(wp_gpio); +} +#else +static inline int omap_mmc_setup_gpio_in(int gpio, const char *label) +{ + return -1; +} + +#define omap_mmc_getcd NULL +#define omap_mmc_getwp NULL +#endif #if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER) static void omap4_vmmc_pbias_config(struct mmc *mmc) { u32 value = 0; - struct omap_sys_ctrl_regs *const ctrl = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - - value = readl(&ctrl->control_pbiaslite); + value = readl((*ctrl)->control_pbiaslite); value &= ~(MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ); - writel(value, &ctrl->control_pbiaslite); + writel(value, (*ctrl)->control_pbiaslite); /* set VMMC to 3V */ twl6030_power_mmc_init(); - value = readl(&ctrl->control_pbiaslite); + value = readl((*ctrl)->control_pbiaslite); value |= MMC1_PBIASLITE_VMODE | MMC1_PBIASLITE_PWRDNZ | MMC1_PWRDNZ; - writel(value, &ctrl->control_pbiaslite); + writel(value, (*ctrl)->control_pbiaslite); } #endif @@ -69,26 +111,24 @@ static void omap4_vmmc_pbias_config(struct mmc *mmc) static void omap5_pbias_config(struct mmc *mmc) { u32 value = 0; - struct omap_sys_ctrl_regs *const ctrl = - (struct omap_sys_ctrl_regs *) SYSCTRL_GENERAL_CORE_BASE; - value = readl(&ctrl->control_pbias); + value = readl((*ctrl)->control_pbias); value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ); value |= SDCARD_BIAS_HIZ_MODE; - writel(value, &ctrl->control_pbias); + writel(value, (*ctrl)->control_pbias); twl6035_mmc1_poweron_ldo(); - value = readl(&ctrl->control_pbias); + value = readl((*ctrl)->control_pbias); value &= ~SDCARD_BIAS_HIZ_MODE; value |= SDCARD_PBIASLITE_VMODE | SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ; - writel(value, &ctrl->control_pbias); + writel(value, (*ctrl)->control_pbias); - value = readl(&ctrl->control_pbias); + value = readl((*ctrl)->control_pbias); if (value & (1 << 23)) { value &= ~(SDCARD_PWRDNZ | SDCARD_BIAS_PWRDNZ); value |= SDCARD_BIAS_HIZ_MODE; - writel(value, &ctrl->control_pbias); + writel(value, (*ctrl)->control_pbias); } } #endif @@ -177,11 +217,12 @@ void mmc_init_stream(struct hsmmc *mmc_base) static int mmc_init_setup(struct mmc *mmc) { - struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; + struct hsmmc *mmc_base; unsigned int reg_val; unsigned int dsor; ulong start; + mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; mmc_board_init(mmc); writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET, @@ -262,10 +303,11 @@ static void mmc_reset_controller_fsm(struct hsmmc *mmc_base, u32 bit) static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) { - struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; + struct hsmmc *mmc_base; unsigned int flags, mmc_stat; ulong start; + mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; start = get_timer(0); while ((readl(&mmc_base->pstate) & (DATI_MASK | CMDI_MASK)) != 0) { if (get_timer(0) - start > MAX_RETRY_MS) { @@ -489,10 +531,11 @@ static int mmc_write_data(struct hsmmc *mmc_base, const char *buf, static void mmc_set_ios(struct mmc *mmc) { - struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv; + struct hsmmc *mmc_base; unsigned int dsor = 0; ulong start; + mmc_base = ((struct omap_hsmmc_data *)mmc->priv)->base_addr; /* configue bus width */ switch (mmc->bus_width) { case 8: @@ -540,36 +583,44 @@ static void mmc_set_ios(struct mmc *mmc) writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl); } -int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max) +int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio, + int wp_gpio) { - struct mmc *mmc; - - mmc = &hsmmc_dev[dev_index]; + struct mmc *mmc = &hsmmc_dev[dev_index]; + struct omap_hsmmc_data *priv_data = &hsmmc_dev_data[dev_index]; sprintf(mmc->name, "OMAP SD/MMC"); mmc->send_cmd = mmc_send_cmd; mmc->set_ios = mmc_set_ios; mmc->init = mmc_init_setup; - mmc->getcd = NULL; + mmc->priv = priv_data; switch (dev_index) { case 0: - mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE; break; #ifdef OMAP_HSMMC2_BASE case 1: - mmc->priv = (struct hsmmc *)OMAP_HSMMC2_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC2_BASE; break; #endif #ifdef OMAP_HSMMC3_BASE case 2: - mmc->priv = (struct hsmmc *)OMAP_HSMMC3_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC3_BASE; break; #endif default: - mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE; + priv_data->base_addr = (struct hsmmc *)OMAP_HSMMC1_BASE; return 1; } + priv_data->cd_gpio = omap_mmc_setup_gpio_in(cd_gpio, "mmc_cd"); + if (priv_data->cd_gpio != -1) + mmc->getcd = omap_mmc_getcd; + + priv_data->wp_gpio = omap_mmc_setup_gpio_in(wp_gpio, "mmc_wp"); + if (priv_data->wp_gpio != -1) + mmc->getwp = omap_mmc_getwp; + mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC) & ~host_caps_mask; diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 551b4232c8..1eaea04ad1 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -440,6 +440,7 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk) mmc->set_ios = sdhci_set_ios; mmc->init = sdhci_init; mmc->getcd = NULL; + mmc->getwp = NULL; caps = sdhci_readl(host, SDHCI_CAPABILITIES); #ifdef CONFIG_MMC_SDMA diff --git a/drivers/mmc/sh_mmcif.c b/drivers/mmc/sh_mmcif.c index 4588568a6d..011d4f3e63 100644 --- a/drivers/mmc/sh_mmcif.c +++ b/drivers/mmc/sh_mmcif.c @@ -599,6 +599,7 @@ int mmcif_mmc_init(void) mmc->set_ios = sh_mmcif_set_ios; mmc->init = sh_mmcif_init; mmc->getcd = NULL; + mmc->getwp = NULL; host->regs = (struct sh_mmcif_regs *)CONFIG_SH_MMCIF_ADDR; host->clk = CONFIG_SH_MMCIF_CLK; mmc->priv = host; diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index d749ab095e..e86bc680ff 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -2,7 +2,7 @@ * (C) Copyright 2009 SAMSUNG Electronics * Minkyu Kang <mk7.kang@samsung.com> * Jaehoon Chung <jh80.chung@samsung.com> - * Portions Copyright 2011-2012 NVIDIA Corporation + * Portions Copyright 2011-2013 NVIDIA Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -28,43 +28,45 @@ #include <asm/arch-tegra/tegra_mmc.h> #include <mmc.h> -/* support 4 mmc hosts */ -struct mmc mmc_dev[4]; -struct mmc_host mmc_host[4]; +DECLARE_GLOBAL_DATA_PTR; +struct mmc mmc_dev[MAX_HOSTS]; +struct mmc_host mmc_host[MAX_HOSTS]; -/** - * Get the host address and peripheral ID for a device. Devices are numbered - * from 0 to 3. - * - * @param host Structure to fill in (base, reg, mmc_id) - * @param dev_index Device index (0-3) - */ -static void tegra_get_setup(struct mmc_host *host, int dev_index) +#ifndef CONFIG_OF_CONTROL +#error "Please enable device tree support to use this driver" +#endif + +static void mmc_set_power(struct mmc_host *host, unsigned short power) { - debug("tegra_get_setup: dev_index = %d\n", dev_index); - - switch (dev_index) { - case 1: - host->base = TEGRA_SDMMC3_BASE; - host->mmc_id = PERIPH_ID_SDMMC3; - break; - case 2: - host->base = TEGRA_SDMMC2_BASE; - host->mmc_id = PERIPH_ID_SDMMC2; - break; - case 3: - host->base = TEGRA_SDMMC1_BASE; - host->mmc_id = PERIPH_ID_SDMMC1; - break; - case 0: - default: - host->base = TEGRA_SDMMC4_BASE; - host->mmc_id = PERIPH_ID_SDMMC4; - break; + u8 pwr = 0; + debug("%s: power = %x\n", __func__, power); + + if (power != (unsigned short)-1) { + switch (1 << power) { + case MMC_VDD_165_195: + pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V1_8; + break; + case MMC_VDD_29_30: + case MMC_VDD_30_31: + pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_0; + break; + case MMC_VDD_32_33: + case MMC_VDD_33_34: + pwr = TEGRA_MMC_PWRCTL_SD_BUS_VOLTAGE_V3_3; + break; + } } + debug("%s: pwr = %X\n", __func__, pwr); - host->reg = (struct tegra_mmc *)host->base; + /* Set the bus voltage first (if any) */ + writeb(pwr, &host->reg->pwrcon); + if (pwr == 0) + return; + + /* Now enable bus power */ + pwr |= TEGRA_MMC_PWRCTL_SD_BUS_POWER; + writeb(pwr, &host->reg->pwrcon); } static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data, @@ -363,8 +365,7 @@ static void mmc_change_clock(struct mmc_host *host, uint clock) debug(" mmc_change_clock called\n"); /* - * Change Tegra SDMMCx clock divisor here. Source is 216MHz, - * PLLP_OUT0 + * Change Tegra SDMMCx clock divisor here. Source is PLLP_OUT0 */ if (clock == 0) goto out; @@ -439,7 +440,7 @@ static void mmc_set_ios(struct mmc *mmc) debug("mmc_set_ios: hostctl = %08X\n", ctrl); } -static void mmc_reset(struct mmc_host *host) +static void mmc_reset(struct mmc_host *host, struct mmc *mmc) { unsigned int timeout; debug(" mmc_reset called\n"); @@ -465,6 +466,14 @@ static void mmc_reset(struct mmc_host *host) timeout--; udelay(1000); } + + /* Set SD bus voltage & enable bus power */ + mmc_set_power(host, fls(mmc->voltages) - 1); + debug("%s: power control = %02X, host control = %02X\n", __func__, + readb(&host->reg->pwrcon), readb(&host->reg->hostctl)); + + /* Make sure SDIO pads are set up */ + pad_init_mmc(host); } static int mmc_core_init(struct mmc *mmc) @@ -473,7 +482,7 @@ static int mmc_core_init(struct mmc *mmc) unsigned int mask; debug(" mmc_core_init called\n"); - mmc_reset(host); + mmc_reset(host, mmc); host->version = readw(&host->reg->hcver); debug("host version = %x\n", host->version); @@ -518,41 +527,43 @@ int tegra_mmc_getcd(struct mmc *mmc) debug("tegra_mmc_getcd called\n"); - if (host->cd_gpio >= 0) - return !gpio_get_value(host->cd_gpio); + if (fdt_gpio_isvalid(&host->cd_gpio)) + return fdtdec_get_gpio(&host->cd_gpio); return 1; } -int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) +static int do_mmc_init(int dev_index) { struct mmc_host *host; char gpusage[12]; /* "SD/MMCn PWR" or "SD/MMCn CD" */ struct mmc *mmc; - debug(" tegra_mmc_init: index %d, bus width %d " - "pwr_gpio %d cd_gpio %d\n", - dev_index, bus_width, pwr_gpio, cd_gpio); - + /* DT should have been read & host config filled in */ host = &mmc_host[dev_index]; + if (!host->enabled) + return -1; - host->clock = 0; - host->pwr_gpio = pwr_gpio; - host->cd_gpio = cd_gpio; - tegra_get_setup(host, dev_index); + debug(" do_mmc_init: index %d, bus width %d " + "pwr_gpio %d cd_gpio %d\n", + dev_index, host->width, + host->pwr_gpio.gpio, host->cd_gpio.gpio); + host->clock = 0; clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000); - if (host->pwr_gpio >= 0) { + if (fdt_gpio_isvalid(&host->pwr_gpio)) { sprintf(gpusage, "SD/MMC%d PWR", dev_index); - gpio_request(host->pwr_gpio, gpusage); - gpio_direction_output(host->pwr_gpio, 1); + gpio_request(host->pwr_gpio.gpio, gpusage); + gpio_direction_output(host->pwr_gpio.gpio, 1); + debug(" Power GPIO name = %s\n", host->pwr_gpio.name); } - if (host->cd_gpio >= 0) { + if (fdt_gpio_isvalid(&host->cd_gpio)) { sprintf(gpusage, "SD/MMC%d CD", dev_index); - gpio_request(host->cd_gpio, gpusage); - gpio_direction_input(host->cd_gpio); + gpio_request(host->cd_gpio.gpio, gpusage); + gpio_direction_input(host->cd_gpio.gpio); + debug(" CD GPIO name = %s\n", host->cd_gpio.name); } mmc = &mmc_dev[dev_index]; @@ -563,12 +574,13 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) mmc->set_ios = mmc_set_ios; mmc->init = mmc_core_init; mmc->getcd = tegra_mmc_getcd; + mmc->getwp = NULL; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; mmc->host_caps = 0; - if (bus_width == 8) + if (host->width == 8) mmc->host_caps |= MMC_MODE_8BIT; - if (bus_width >= 4) + if (host->width >= 4) mmc->host_caps |= MMC_MODE_4BIT; mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC; @@ -577,8 +589,6 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) * low-speed SDIO card frequency (actually 400KHz) * max freq is highest HS eMMC clock as per the SD/MMC spec * (actually 52MHz) - * Both of these are the closest equivalents w/216MHz source - * clock and Tegra SDMMC divisors. */ mmc->f_min = 375000; mmc->f_max = 48000000; @@ -587,3 +597,104 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) return 0; } + +/** + * Get the host address and peripheral ID for a node. + * + * @param blob fdt blob + * @param node Device index (0-3) + * @param host Structure to fill in (reg, width, mmc_id) + */ +static int mmc_get_config(const void *blob, int node, struct mmc_host *host) +{ + debug("%s: node = %d\n", __func__, node); + + host->enabled = fdtdec_get_is_enabled(blob, node); + + host->reg = (struct tegra_mmc *)fdtdec_get_addr(blob, node, "reg"); + if ((fdt_addr_t)host->reg == FDT_ADDR_T_NONE) { + debug("%s: no sdmmc base reg info found\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + host->mmc_id = clock_decode_periph_id(blob, node); + if (host->mmc_id == PERIPH_ID_NONE) { + debug("%s: could not decode periph id\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + /* + * NOTE: mmc->bus_width is determined by mmc.c dynamically. + * TBD: Override it with this value? + */ + host->width = fdtdec_get_int(blob, node, "bus-width", 0); + if (!host->width) + debug("%s: no sdmmc width found\n", __func__); + + /* These GPIOs are optional */ + fdtdec_decode_gpio(blob, node, "cd-gpios", &host->cd_gpio); + fdtdec_decode_gpio(blob, node, "wp-gpios", &host->wp_gpio); + fdtdec_decode_gpio(blob, node, "power-gpios", &host->pwr_gpio); + + debug("%s: found controller at %p, width = %d, periph_id = %d\n", + __func__, host->reg, host->width, host->mmc_id); + return 0; +} + +/* + * Process a list of nodes, adding them to our list of SDMMC ports. + * + * @param blob fdt blob + * @param node_list list of nodes to process (any <=0 are ignored) + * @param count number of nodes to process + * @return 0 if ok, -1 on error + */ +static int process_nodes(const void *blob, int node_list[], int count) +{ + struct mmc_host *host; + int i, node; + + debug("%s: count = %d\n", __func__, count); + + /* build mmc_host[] for each controller */ + for (i = 0; i < count; i++) { + node = node_list[i]; + if (node <= 0) + continue; + + host = &mmc_host[i]; + host->id = i; + + if (mmc_get_config(blob, node, host)) { + printf("%s: failed to decode dev %d\n", __func__, i); + return -1; + } + do_mmc_init(i); + } + return 0; +} + +void tegra_mmc_init(void) +{ + int node_list[MAX_HOSTS], count; + const void *blob = gd->fdt_blob; + debug("%s entry\n", __func__); + + /* See if any Tegra30 MMC controllers are present */ + count = fdtdec_find_aliases_for_id(blob, "sdhci", + COMPAT_NVIDIA_TEGRA30_SDMMC, node_list, MAX_HOSTS); + debug("%s: count of T30 sdhci nodes is %d\n", __func__, count); + if (process_nodes(blob, node_list, count)) { + printf("%s: Error processing T30 mmc node(s)!\n", __func__); + return; + } + + /* Now look for any Tegra20 MMC controllers */ + count = fdtdec_find_aliases_for_id(blob, "sdhci", + COMPAT_NVIDIA_TEGRA20_SDMMC, node_list, MAX_HOSTS); + debug("%s: count of T20 sdhci nodes is %d\n", __func__, count); + if (process_nodes(blob, node_list, count)) { + printf("%s: Error processing T20 mmc node(s)!\n", __func__); + return; + } +} diff --git a/drivers/mtd/nand/kmeter1_nand.c b/drivers/mtd/nand/kmeter1_nand.c index e8e5b7b85e..f044597237 100644 --- a/drivers/mtd/nand/kmeter1_nand.c +++ b/drivers/mtd/nand/kmeter1_nand.c @@ -119,7 +119,11 @@ static int kpn_nand_dev_ready(struct mtd_info *mtd) int board_nand_init(struct nand_chip *nand) { +#if defined(CONFIG_NAND_ECC_BCH) + nand->ecc.mode = NAND_ECC_SOFT_BCH; +#else nand->ecc.mode = NAND_ECC_SOFT; +#endif /* Reference hardware control function */ nand->cmd_ctrl = kpn_nand_hwcontrol; diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index 2ba0c5ef95..ff2d348307 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -237,6 +237,14 @@ int nand_lock(struct mtd_info *mtd, int tight) /* select the NAND device */ chip->select_chip(mtd, 0); + /* check the Lock Tight Status */ + chip->cmdfunc(mtd, NAND_CMD_LOCK_STATUS, -1, 0); + if (chip->read_byte(mtd) & NAND_LOCK_STATUS_TIGHT) { + printf("nand_lock: Device is locked tight!\n"); + ret = -1; + goto out; + } + chip->cmdfunc(mtd, (tight ? NAND_CMD_LOCK_TIGHT : NAND_CMD_LOCK), -1, -1); @@ -249,6 +257,7 @@ int nand_lock(struct mtd_info *mtd, int tight) ret = -1; } + out: /* de-select the NAND device */ chip->select_chip(mtd, -1); return ret; @@ -337,6 +346,15 @@ int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length, goto out; } + /* check the Lock Tight Status */ + page = (int)(start >> chip->page_shift); + chip->cmdfunc(mtd, NAND_CMD_LOCK_STATUS, -1, page & chip->pagemask); + if (chip->read_byte(mtd) & NAND_LOCK_STATUS_TIGHT) { + printf("nand_unlock: Device is locked tight!\n"); + ret = -1; + goto out; + } + if ((start & (mtd->erasesize - 1)) != 0) { printf("nand_unlock: Start address must be beginning of " "nand block!\n"); @@ -358,7 +376,6 @@ int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length, length -= mtd->erasesize; /* submit address of first page to unlock */ - page = (int)(start >> chip->page_shift); chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask); /* submit ADDRESS of LAST page to unlock */ diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index cee394ece4..bbf5443ec8 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -25,6 +25,7 @@ #include <asm/io.h> #include <asm/errno.h> #include <asm/arch/mem.h> +#include <asm/arch/cpu.h> #include <asm/arch/omap_gpmc.h> #include <linux/mtd/nand_ecc.h> #include <linux/compiler.h> diff --git a/drivers/mtd/onenand/onenand_spl.c b/drivers/mtd/onenand/onenand_spl.c index 50eaa71882..4bec2c2adc 100644 --- a/drivers/mtd/onenand/onenand_spl.c +++ b/drivers/mtd/onenand/onenand_spl.c @@ -112,7 +112,7 @@ static int onenand_spl_read_page(uint32_t block, uint32_t page, uint32_t *buf, void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst) { uint32_t *addr = (uint32_t *)dst; - uint32_t total_pages; + uint32_t to_page; uint32_t block; uint32_t page, rpage; enum onenand_spl_pagesize pagesize; @@ -125,22 +125,20 @@ void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst) * pulling further unwanted functions into the SPL. */ if (pagesize == 2048) { - total_pages = DIV_ROUND_UP(size, 2048); page = offs / 2048; + to_page = page + DIV_ROUND_UP(size, 2048); } else { - total_pages = DIV_ROUND_UP(size, 4096); page = offs / 4096; + to_page = page + DIV_ROUND_UP(size, 4096); } - for (; page <= total_pages; page++) { + for (; page <= to_page; page++) { block = page / ONENAND_PAGES_PER_BLOCK; rpage = page & (ONENAND_PAGES_PER_BLOCK - 1); ret = onenand_spl_read_page(block, rpage, addr, pagesize); - if (ret) { - total_pages += ONENAND_PAGES_PER_BLOCK; + if (ret) page += ONENAND_PAGES_PER_BLOCK - 1; - } else { + else addr += pagesize / 4; - } } } diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c index db04795dfc..7a36850198 100644 --- a/drivers/net/cpsw.c +++ b/drivers/net/cpsw.c @@ -24,6 +24,7 @@ #include <asm/errno.h> #include <asm/io.h> #include <phy.h> +#include <asm/arch/cpu.h> #define BITMASK(bits) (BIT(bits) - 1) #define PHY_REG_MASK 0x1f @@ -227,6 +228,9 @@ struct cpsw_priv { struct cpsw_slave *slaves; struct phy_device *phydev; struct mii_dev *bus; + + u32 mdio_link; + u32 phy_mask; }; static inline int cpsw_ale_get_field(u32 *ale_entry, u32 start, u32 bits) @@ -598,10 +602,21 @@ static int cpsw_update_link(struct cpsw_priv *priv) for_each_slave(slave, priv) cpsw_slave_update_link(slave, priv, &link); - + priv->mdio_link = readl(&mdio_regs->link); return link; } +static int cpsw_check_link(struct cpsw_priv *priv) +{ + u32 link = 0; + + link = __raw_readl(&mdio_regs->link) & priv->phy_mask; + if ((link) && (link == priv->mdio_link)) + return 1; + + return cpsw_update_link(priv); +} + static inline u32 cpsw_get_slave_port(struct cpsw_priv *priv, u32 slave_num) { if (priv->host_port == 0) @@ -631,6 +646,8 @@ static void cpsw_slave_init(struct cpsw_slave *slave, struct cpsw_priv *priv) cpsw_ale_port_state(priv, slave_port, ALE_PORT_STATE_FORWARD); cpsw_ale_add_mcast(priv, NetBcastAddr, 1 << slave_port); + + priv->phy_mask |= 1 << slave->data->phy_id; } static struct cpdma_desc *cpdma_desc_alloc(struct cpsw_priv *priv) @@ -862,7 +879,7 @@ static int cpsw_send(struct eth_device *dev, void *packet, int length) int len; int timeout = CPDMA_TIMEOUT; - if (!cpsw_update_link(priv)) + if (!cpsw_check_link(priv)) return -EIO; flush_dcache_range((unsigned long)packet, diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c index 49c74c278a..8d70586937 100644 --- a/drivers/net/fm/fm.c +++ b/drivers/net/fm/fm.c @@ -362,7 +362,6 @@ static void fm_init_qmi(struct fm_qmi_common *qmi) int fm_init_common(int index, struct ccsr_fman *reg) { int rc; - char env_addr[32]; #if defined(CONFIG_SYS_QE_FMAN_FW_IN_NOR) void *addr = (void *)CONFIG_SYS_QE_FMAN_FW_ADDR; #elif defined(CONFIG_SYS_QE_FMAN_FW_IN_NAND) @@ -416,8 +415,7 @@ int fm_init_common(int index, struct ccsr_fman *reg) rc = fman_upload_firmware(index, ®->fm_imem, addr); if (rc) return rc; - sprintf(env_addr, "0x%lx", (long unsigned int)addr); - setenv("fman_ucode", env_addr); + setenv_addr("fman_ucode", addr); fm_init_muram(index, ®->muram); fm_init_qmi(®->fm_qmi_common); diff --git a/drivers/rtc/mk48t59.c b/drivers/rtc/mk48t59.c index e2858232d0..3af2623eb8 100644 --- a/drivers/rtc/mk48t59.c +++ b/drivers/rtc/mk48t59.c @@ -49,20 +49,6 @@ static void rtc_write (short reg, uchar val) out8(RTC_PORT_DATA, val); } -#elif defined(CONFIG_PCIPPC2) - -#include "../board/pcippc2/pcippc2.h" - -static uchar rtc_read (short reg) -{ - return in8(RTC(reg)); -} - -static void rtc_write (short reg, uchar val) -{ - out8(RTC(reg),val); -} - #elif defined(CONFIG_EVAL5200) static uchar rtc_read (short reg) diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 5e8b64873d..de3f471996 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -33,7 +33,6 @@ COBJS-$(CONFIG_ARM_DCC) += arm_dcc.o COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o COBJS-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o COBJS-$(CONFIG_MCFUART) += mcfuart.o -COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o COBJS-$(CONFIG_SYS_NS16550) += ns16550.o COBJS-$(CONFIG_S3C64XX) += s3c64xx.o diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 87a0917086..ed4e6b3a1f 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -43,10 +43,10 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \ - defined(CONFIG_AM33XX) + defined(CONFIG_AM33XX) || defined(CONFIG_TI814X) serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ #endif - serial_out(UART_LCR_BKSE | UART_LCRVAL, (ulong)&com_port->lcr); + serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); serial_out(0, &com_port->dll); serial_out(0, &com_port->dlm); serial_out(UART_LCRVAL, &com_port->lcr); @@ -57,7 +57,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor) serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); serial_out(UART_LCRVAL, &com_port->lcr); #if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \ - defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) + defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \ + defined(CONFIG_TI814X) #if defined(CONFIG_APTIX) /* /13 mode so Aptix 6MHz can hit 115200 */ diff --git a/drivers/serial/ns9750_serial.c b/drivers/serial/ns9750_serial.c deleted file mode 100644 index 85fc68a076..0000000000 --- a/drivers/serial/ns9750_serial.c +++ /dev/null @@ -1,218 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_serial.c,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Serial driver for the NS9750. Only one UART is supported yet. - * @References: [1] NS9750 Hardware Reference/December 2003 - * @TODO: Implement Character GAP Timer when chip is fixed for PLL bypass - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#include <common.h> - -#include "ns9750_bbus.h" /* for GPIOs */ -#include "ns9750_ser.h" /* for serial configuration */ - -DECLARE_GLOBAL_DATA_PTR; - -#if !defined(CONFIG_CONS_INDEX) -#error "No console index specified." -#endif - -#define CONSOLE CONFIG_CONS_INDEX - -static unsigned int calcBitrateRegister( void ); -static unsigned int calcRxCharGapRegister( void ); - -static char cCharsAvailable; /* Numbers of chars in unCharCache */ -static unsigned int unCharCache; /* unCharCache is only valid if - * cCharsAvailable > 0 */ - -/*********************************************************************** - * @Function: serial_init - * @Return: 0 - * @Descr: configures GPIOs and UART. Requires BBUS Master Reset turned off - ***********************************************************************/ - -static int ns9750_serial_init(void) -{ - unsigned int aunGPIOTxD[] = { 0, 8, 40, 44 }; - unsigned int aunGPIORxD[] = { 1, 9, 41, 45 }; - - cCharsAvailable = 0; - - /* configure TxD and RxD pins for their special function */ - set_gpio_cfg_reg_val( aunGPIOTxD[ CONSOLE ], - NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_OUTPUT ); - set_gpio_cfg_reg_val( aunGPIORxD[ CONSOLE ], - NS9750_GPIO_CFG_FUNC_0 | NS9750_GPIO_CFG_INPUT ); - - /* configure serial engine */ - *get_ser_reg_addr_channel( NS9750_SER_CTRL_A, CONSOLE ) = - NS9750_SER_CTRL_A_CE | - NS9750_SER_CTRL_A_STOP | - NS9750_SER_CTRL_A_WLS_8; - - serial_setbrg(); - - *get_ser_reg_addr_channel( NS9750_SER_CTRL_B, CONSOLE ) = - NS9750_SER_CTRL_B_RCGT; - - return 0; -} - -/*********************************************************************** - * @Function: serial_putc - * @Return: n/a - * @Descr: writes one character to the FIFO. Blocks until FIFO is not full - ***********************************************************************/ - -static void ns9750_serial_putc(const char c) -{ - if (c == '\n') - serial_putc( '\r' ); - - while (!(*get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE) & - NS9750_SER_STAT_A_TRDY ) ) { - /* do nothing, wait for characters in FIFO sent */ - } - - *(volatile char*) get_ser_reg_addr_channel( NS9750_SER_FIFO, - CONSOLE) = c; -} - -/*********************************************************************** - * @Function: serial_getc - * @Return: the character read - * @Descr: performs only 8bit accesses to the FIFO. No error handling - ***********************************************************************/ - -static int ns9750_serial_getc(void) -{ - int i; - - while (!serial_tstc() ) { - /* do nothing, wait for incoming characters */ - } - - /* at least one character in unCharCache */ - i = (int) (unCharCache & 0xff); - - unCharCache >>= 8; - cCharsAvailable--; - - return i; -} - -/*********************************************************************** - * @Function: serial_tstc - * @Return: 0 if no input available, otherwise != 0 - * @Descr: checks for incoming FIFO not empty. Stores the incoming chars in - * unCharCache and the numbers of characters in cCharsAvailable - ***********************************************************************/ - -static int ns9750_serial_tstc(void) -{ - unsigned int unRegCache; - - if ( cCharsAvailable ) - return 1; - - unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A,CONSOLE ); - if( unRegCache & NS9750_SER_STAT_A_RBC ) { - *get_ser_reg_addr_channel( NS9750_SER_STAT_A, CONSOLE ) = - NS9750_SER_STAT_A_RBC; - unRegCache = *get_ser_reg_addr_channel( NS9750_SER_STAT_A, - CONSOLE ); - } - - if ( unRegCache & NS9750_SER_STAT_A_RRDY ) { - cCharsAvailable = (unRegCache & NS9750_SER_STAT_A_RXFDB_MA)>>20; - if ( !cCharsAvailable ) - cCharsAvailable = 4; - - unCharCache = *get_ser_reg_addr_channel( NS9750_SER_FIFO, - CONSOLE ); - return 1; - } - - /* no chars available */ - return 0; -} - -static void ns9750_serial_setbrg(void) -{ - *get_ser_reg_addr_channel( NS9750_SER_BITRATE, CONSOLE ) = - calcBitrateRegister(); - *get_ser_reg_addr_channel( NS9750_SER_RX_CHAR_TIMER, CONSOLE ) = - calcRxCharGapRegister(); -} - -/*********************************************************************** - * @Function: calcBitrateRegister - * @Return: value for the serial bitrate register - * @Descr: register value depends on clock frequency and baudrate - ***********************************************************************/ - -static unsigned int calcBitrateRegister( void ) -{ - return ( NS9750_SER_BITRATE_EBIT | - NS9750_SER_BITRATE_CLKMUX_BCLK | - NS9750_SER_BITRATE_TMODE | - NS9750_SER_BITRATE_TCDR_16 | - NS9750_SER_BITRATE_RCDR_16 | - ( ( ( ( CONFIG_SYS_CLK_FREQ / 8 ) / /* BBUS clock,[1] Fig. 38 */ - ( gd->baudrate * 16 ) ) - 1 ) & - NS9750_SER_BITRATE_N_MA ) ); -} - -/*********************************************************************** - * @Function: calcRxCharGapRegister - * @Return: value for the character gap timer register - * @Descr: register value depends on clock frequency and baudrate. Currently 0 - * is used as there is a bug with the gap timer in PLL bypass mode. - ***********************************************************************/ - -static unsigned int calcRxCharGapRegister( void ) -{ - return NS9750_SER_RX_CHAR_TIMER_TRUN; -} - -static struct serial_device ns9750_serial_drv = { - .name = "ns9750_serial", - .start = ns9750_serial_init, - .stop = NULL, - .setbrg = ns9750_serial_setbrg, - .putc = ns9750_serial_putc, - .puts = default_serial_puts, - .getc = ns9750_serial_getc, - .tstc = ns9750_serial_tstc, -}; - -void ns9750_serial_initialize(void) -{ - serial_register(&ns9750_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &ns9750_serial_drv; -} diff --git a/drivers/serial/sandbox.c b/drivers/serial/sandbox.c index cb19401df6..b73520ca94 100644 --- a/drivers/serial/sandbox.c +++ b/drivers/serial/sandbox.c @@ -30,6 +30,19 @@ #include <serial.h> #include <linux/compiler.h> +/* + * + * serial_buf: A buffer that holds keyboard characters for the + * Sandbox U-boot. + * + * invariants: + * serial_buf_write == serial_buf_read -> empty buffer + * (serial_buf_write + 1) % 16 == serial_buf_read -> full buffer + */ +static char serial_buf[16]; +static unsigned int serial_buf_write; +static unsigned int serial_buf_read; + static int sandbox_serial_init(void) { os_tty_raw(0); @@ -50,18 +63,37 @@ static void sandbox_serial_puts(const char *str) os_write(1, str, strlen(str)); } -static int sandbox_serial_getc(void) +static unsigned int increment_buffer_index(unsigned int index) +{ + return (index + 1) % ARRAY_SIZE(serial_buf); +} + +static int sandbox_serial_tstc(void) { - char buf; + const unsigned int next_index = + increment_buffer_index(serial_buf_write); ssize_t count; - count = os_read(0, &buf, 1); - return count == 1 ? buf : 0; + os_usleep(100); + if (next_index == serial_buf_read) + return 1; /* buffer full */ + + count = os_read_no_block(0, &serial_buf[serial_buf_write], 1); + if (count == 1) + serial_buf_write = next_index; + return serial_buf_write != serial_buf_read; } -static int sandbox_serial_tstc(void) +static int sandbox_serial_getc(void) { - return 0; + int result; + + while (!sandbox_serial_tstc()) + ; /* buffer empty */ + + result = serial_buf[serial_buf_read]; + serial_buf_read = increment_buffer_index(serial_buf_read); + return result; } static struct serial_device sandbox_serial_drv = { diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 1f8955a0fd..7922bf0669 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -164,7 +164,6 @@ serial_initfunc(altera_serial_initialize); serial_initfunc(atmel_serial_initialize); serial_initfunc(lpc32xx_serial_initialize); serial_initfunc(mcf_serial_initialize); -serial_initfunc(ns9750_serial_initialize); serial_initfunc(oc_serial_initialize); serial_initfunc(s3c64xx_serial_initialize); serial_initfunc(sandbox_serial_initialize); @@ -259,7 +258,6 @@ void serial_initialize(void) atmel_serial_initialize(); lpc32xx_serial_initialize(); mcf_serial_initialize(); - ns9750_serial_initialize(); oc_serial_initialize(); s3c64xx_serial_initialize(); sandbox_serial_initialize(); diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c index fc01a3c516..b92eef4db9 100644 --- a/drivers/serial/serial_ns16550.c +++ b/drivers/serial/serial_ns16550.c @@ -247,24 +247,36 @@ serial_setbrg_dev(unsigned int dev_index) _serial_setbrg(dev_index); } +#if defined(CONFIG_SYS_NS16550_COM1) DECLARE_ESERIAL_FUNCTIONS(1); struct serial_device eserial1_device = INIT_ESERIAL_STRUCTURE(1, "eserial0"); +#endif +#if defined(CONFIG_SYS_NS16550_COM2) DECLARE_ESERIAL_FUNCTIONS(2); struct serial_device eserial2_device = INIT_ESERIAL_STRUCTURE(2, "eserial1"); +#endif +#if defined(CONFIG_SYS_NS16550_COM3) DECLARE_ESERIAL_FUNCTIONS(3); struct serial_device eserial3_device = INIT_ESERIAL_STRUCTURE(3, "eserial2"); +#endif +#if defined(CONFIG_SYS_NS16550_COM4) DECLARE_ESERIAL_FUNCTIONS(4); struct serial_device eserial4_device = INIT_ESERIAL_STRUCTURE(4, "eserial3"); +#endif +#if defined(CONFIG_SYS_NS16550_COM5) DECLARE_ESERIAL_FUNCTIONS(5); struct serial_device eserial5_device = INIT_ESERIAL_STRUCTURE(5, "eserial4"); +#endif +#if defined(CONFIG_SYS_NS16550_COM6) DECLARE_ESERIAL_FUNCTIONS(6); struct serial_device eserial6_device = INIT_ESERIAL_STRUCTURE(6, "eserial5"); +#endif __weak struct serial_device *default_serial_console(void) { diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c index e47cb9a9e7..148d1a6ddd 100644 --- a/drivers/serial/usbtty.c +++ b/drivers/serial/usbtty.c @@ -63,7 +63,7 @@ /* * Buffers to hold input and output data */ -#define USBTTY_BUFFER_SIZE 256 +#define USBTTY_BUFFER_SIZE 2048 static circbuf_t usbtty_input; static circbuf_t usbtty_output; diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 83abcbda28..b8264df3a9 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -31,6 +31,7 @@ COBJS-$(CONFIG_ARMADA100_SPI) += armada100_spi.o COBJS-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o +COBJS-$(CONFIG_BFIN_SPI6XX) += bfin_spi6xx.o COBJS-$(CONFIG_CF_SPI) += cf_spi.o COBJS-$(CONFIG_CF_QSPI) += cf_qspi.o COBJS-$(CONFIG_DAVINCI_SPI) += davinci_spi.o diff --git a/drivers/spi/bfin_spi6xx.c b/drivers/spi/bfin_spi6xx.c new file mode 100644 index 0000000000..fde3447426 --- /dev/null +++ b/drivers/spi/bfin_spi6xx.c @@ -0,0 +1,308 @@ +/* + * Analog Devices SPI3 controller driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <malloc.h> +#include <spi.h> + +#include <asm/blackfin.h> +#include <asm/gpio.h> +#include <asm/portmux.h> +#include <asm/mach-common/bits/spi6xx.h> + +struct bfin_spi_slave { + struct spi_slave slave; + u32 control, clock; + struct bfin_spi_regs *regs; + int cs_pol; +}; + +#define to_bfin_spi_slave(s) container_of(s, struct bfin_spi_slave, slave) + +#define gpio_cs(cs) ((cs) - MAX_CTRL_CS) +#ifdef CONFIG_BFIN_SPI_GPIO_CS +# define is_gpio_cs(cs) ((cs) > MAX_CTRL_CS) +#else +# define is_gpio_cs(cs) 0 +#endif + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + if (is_gpio_cs(cs)) + return gpio_is_valid(gpio_cs(cs)); + else + return (cs >= 1 && cs <= MAX_CTRL_CS); +} + +void spi_cs_activate(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + + if (is_gpio_cs(slave->cs)) { + unsigned int cs = gpio_cs(slave->cs); + gpio_set_value(cs, bss->cs_pol); + } else { + u32 ssel; + ssel = bfin_read32(&bss->regs->ssel); + ssel |= 1 << slave->cs; + if (bss->cs_pol) + ssel |= (1 << 8) << slave->cs; + else + ssel &= ~((1 << 8) << slave->cs); + bfin_write32(&bss->regs->ssel, ssel); + } + + SSYNC(); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + + if (is_gpio_cs(slave->cs)) { + unsigned int cs = gpio_cs(slave->cs); + gpio_set_value(cs, !bss->cs_pol); + } else { + u32 ssel; + ssel = bfin_read32(&bss->regs->ssel); + if (bss->cs_pol) + ssel &= ~((1 << 8) << slave->cs); + else + ssel |= (1 << 8) << slave->cs; + /* deassert cs */ + bfin_write32(&bss->regs->ssel, ssel); + SSYNC(); + /* disable cs */ + ssel &= ~(1 << slave->cs); + bfin_write32(&bss->regs->ssel, ssel); + } + + SSYNC(); +} + +void spi_init() +{ +} + +#define SPI_PINS(n) \ + { 0, P_SPI##n##_SCK, P_SPI##n##_MISO, P_SPI##n##_MOSI, 0 } +static unsigned short pins[][5] = { +#ifdef SPI0_REGBASE + [0] = SPI_PINS(0), +#endif +#ifdef SPI1_REGBASE + [1] = SPI_PINS(1), +#endif +#ifdef SPI2_REGBASE + [2] = SPI_PINS(2), +#endif +}; + +#define SPI_CS_PINS(n) \ + { \ + P_SPI##n##_SSEL1, P_SPI##n##_SSEL2, P_SPI##n##_SSEL3, \ + P_SPI##n##_SSEL4, P_SPI##n##_SSEL5, P_SPI##n##_SSEL6, \ + P_SPI##n##_SSEL7, \ + } +static const unsigned short cs_pins[][7] = { +#ifdef SPI0_REGBASE + [0] = SPI_CS_PINS(0), +#endif +#ifdef SPI1_REGBASE + [1] = SPI_CS_PINS(1), +#endif +#ifdef SPI2_REGBASE + [2] = SPI_CS_PINS(2), +#endif +}; + +void spi_set_speed(struct spi_slave *slave, uint hz) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + ulong sclk; + u32 clock; + + sclk = get_sclk1(); + clock = sclk / hz; + if (clock) + clock--; + bss->clock = clock; +} + +struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct bfin_spi_slave *bss; + u32 reg_base; + + if (!spi_cs_is_valid(bus, cs)) + return NULL; + + if (bus >= ARRAY_SIZE(pins) || pins[bus] == NULL) { + debug("%s: invalid bus %u\n", __func__, bus); + return NULL; + } + switch (bus) { +#ifdef SPI0_REGBASE + case 0: + reg_base = SPI0_REGBASE; + break; +#endif +#ifdef SPI1_REGBASE + case 1: + reg_base = SPI1_REGBASE; + break; +#endif +#ifdef SPI2_REGBASE + case 2: + reg_base = SPI2_REGBASE; + break; +#endif + default: + return NULL; + } + + bss = malloc(sizeof(*bss)); + if (!bss) + return NULL; + + bss->slave.bus = bus; + bss->slave.cs = cs; + bss->regs = (struct bfin_spi_regs *)reg_base; + bss->control = SPI_CTL_EN | SPI_CTL_MSTR; + if (mode & SPI_CPHA) + bss->control |= SPI_CTL_CPHA; + if (mode & SPI_CPOL) + bss->control |= SPI_CTL_CPOL; + if (mode & SPI_LSB_FIRST) + bss->control |= SPI_CTL_LSBF; + bss->control &= ~SPI_CTL_ASSEL; + bss->cs_pol = mode & SPI_CS_HIGH ? 1 : 0; + spi_set_speed(&bss->slave, max_hz); + + return &bss->slave; +} + +void spi_free_slave(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + free(bss); +} + +int spi_claim_bus(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + + debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); + + if (is_gpio_cs(slave->cs)) { + unsigned int cs = gpio_cs(slave->cs); + gpio_request(cs, "bfin-spi"); + gpio_direction_output(cs, !bss->cs_pol); + pins[slave->bus][0] = P_DONTCARE; + } else + pins[slave->bus][0] = cs_pins[slave->bus][slave->cs - 1]; + peripheral_request_list(pins[slave->bus], "bfin-spi"); + + bfin_write32(&bss->regs->control, bss->control); + bfin_write32(&bss->regs->clock, bss->clock); + bfin_write32(&bss->regs->delay, 0x0); + bfin_write32(&bss->regs->rx_control, SPI_RXCTL_REN); + bfin_write32(&bss->regs->tx_control, SPI_TXCTL_TEN | SPI_TXCTL_TTI); + SSYNC(); + + return 0; +} + +void spi_release_bus(struct spi_slave *slave) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + + debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs); + + peripheral_free_list(pins[slave->bus]); + if (is_gpio_cs(slave->cs)) + gpio_free(gpio_cs(slave->cs)); + + bfin_write32(&bss->regs->rx_control, 0x0); + bfin_write32(&bss->regs->tx_control, 0x0); + bfin_write32(&bss->regs->control, 0x0); + SSYNC(); +} + +#ifndef CONFIG_BFIN_SPI_IDLE_VAL +# define CONFIG_BFIN_SPI_IDLE_VAL 0xff +#endif + +static int spi_pio_xfer(struct bfin_spi_slave *bss, const u8 *tx, u8 *rx, + uint bytes) +{ + /* discard invalid rx data and empty rfifo */ + while (!(bfin_read32(&bss->regs->status) & SPI_STAT_RFE)) + bfin_read32(&bss->regs->rfifo); + + while (bytes--) { + u8 value = (tx ? *tx++ : CONFIG_BFIN_SPI_IDLE_VAL); + debug("%s: tx:%x ", __func__, value); + bfin_write32(&bss->regs->tfifo, value); + SSYNC(); + while (bfin_read32(&bss->regs->status) & SPI_STAT_RFE) + if (ctrlc()) + return -1; + value = bfin_read32(&bss->regs->rfifo); + if (rx) + *rx++ = value; + debug("rx:%x\n", value); + } + + return 0; +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct bfin_spi_slave *bss = to_bfin_spi_slave(slave); + const u8 *tx = dout; + u8 *rx = din; + uint bytes = bitlen / 8; + int ret = 0; + + debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__, + slave->bus, slave->cs, bitlen, bytes, flags); + + if (bitlen == 0) + goto done; + + /* we can only do 8 bit transfers */ + if (bitlen % 8) { + flags |= SPI_XFER_END; + goto done; + } + + if (flags & SPI_XFER_BEGIN) + spi_cs_activate(slave); + + ret = spi_pio_xfer(bss, tx, rx, bytes); + + done: + if (flags & SPI_XFER_END) + spi_cs_deactivate(slave); + + return ret; +} diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c index bb865b7f4c..ffa3c1d693 100644 --- a/drivers/spi/mxs_spi.c +++ b/drivers/spi/mxs_spi.c @@ -40,17 +40,6 @@ #define MXSSSP_SMALL_TRANSFER 512 -/* - * CONFIG_MXS_SPI_DMA_ENABLE: Experimental mixed PIO/DMA support for MXS SPI - * host. Use with utmost caution! - * - * Enabling this is not yet recommended since this - * still doesn't support transfers to/from unaligned - * addresses. Therefore this driver will not work - * for example with saving environment. This is - * caused by DMA alignment constraints on MXS. - */ - struct mxs_spi_slave { struct spi_slave slave; uint32_t max_khz; @@ -70,7 +59,7 @@ void spi_init(void) int spi_cs_is_valid(unsigned int bus, unsigned int cs) { /* MXS SPI: 4 ports and 3 chip selects maximum */ - if (bus > 3 || cs > 2) + if (!mxs_ssp_bus_id_valid(bus) || cs > 2) return 0; else return 1; @@ -92,7 +81,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!mxs_slave) return NULL; - if (mxs_dma_init_channel(bus)) + if (mxs_dma_init_channel(MXS_DMA_CHANNEL_AHB_APBH_SSP0 + bus)) goto err_init; mxs_slave->slave.bus = bus; @@ -168,7 +157,12 @@ static int mxs_spi_xfer_pio(struct mxs_spi_slave *slave, while (length--) { /* We transfer 1 byte */ +#if defined(CONFIG_MX23) + writel(SSP_CTRL0_XFER_COUNT_MASK, &ssp_regs->hw_ssp_ctrl0_clr); + writel(1, &ssp_regs->hw_ssp_ctrl0_set); +#elif defined(CONFIG_MX28) writel(1, &ssp_regs->hw_ssp_xfer_size); +#endif if ((flags & SPI_XFER_END) && !length) mxs_spi_end_xfer(ssp_regs); @@ -226,6 +220,12 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave, int tl; int ret = 0; +#if defined(CONFIG_MX23) + const int mxs_spi_pio_words = 1; +#elif defined(CONFIG_MX28) + const int mxs_spi_pio_words = 4; +#endif + ALLOC_CACHE_ALIGN_BUFFER(struct mxs_dma_desc, desc, desc_count); memset(desc, 0, sizeof(struct mxs_dma_desc) * desc_count); @@ -281,7 +281,7 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave, dp->cmd.data |= ((tl & 0xffff) << MXS_DMA_DESC_BYTES_OFFSET) | - (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) | + (mxs_spi_pio_words << MXS_DMA_DESC_PIO_WORDS_OFFSET) | MXS_DMA_DESC_HALT_ON_TERMINATE | MXS_DMA_DESC_TERMINATE_FLUSH; @@ -298,15 +298,19 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave, } /* - * Write CTRL0, CMD0, CMD1, XFER_SIZE registers. It is + * Write CTRL0, CMD0, CMD1 and XFER_SIZE registers in + * case of MX28, write only CTRL0 in case of MX23 due + * to the difference in register layout. It is utterly * essential that the XFER_SIZE register is written on * a per-descriptor basis with the same size as is the * descriptor! */ dp->cmd.pio_words[0] = ctrl0; +#ifdef CONFIG_MX28 dp->cmd.pio_words[1] = 0; dp->cmd.pio_words[2] = 0; dp->cmd.pio_words[3] = tl; +#endif mxs_dma_desc_append(dmach, dp); @@ -332,12 +336,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, char dummy; int write = 0; char *data = NULL; - -#ifdef CONFIG_MXS_SPI_DMA_ENABLE int dma = 1; -#else - int dma = 0; -#endif if (bitlen == 0) { if (flags & SPI_XFER_END) { diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c index dc5ca65463..fd8f8a7606 100644 --- a/drivers/usb/eth/smsc95xx.c +++ b/drivers/usb/eth/smsc95xx.c @@ -265,10 +265,6 @@ static int smsc95xx_eeprom_confirm_not_busy(struct ueth_data *dev) do { smsc95xx_read_reg(dev, E2P_CMD, &val); - if (!(val & E2P_CMD_LOADED_)) { - debug("No EEPROM present\n"); - return -1; - } if (!(val & E2P_CMD_BUSY_)) return 0; udelay(40); diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 040eaba3bc..e545b6be6b 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -25,15 +25,21 @@ include $(TOPDIR)/config.mk LIB := $(obj)libusb_gadget.o +# if defined(CONFIG_USB_GADGET) || defined(CONFIG_USB_ETHER) +# Everytime you forget how crufty makefiles can get things like +# this remind you... +ifneq (,$(CONFIG_USB_GADGET)$(CONFIG_USB_ETHER)) +COBJS-y += epautoconf.o config.o usbstring.o +endif + # new USB gadget layer dependencies ifdef CONFIG_USB_GADGET -COBJS-y += epautoconf.o config.o usbstring.o COBJS-$(CONFIG_USB_GADGET_S3C_UDC_OTG) += s3c_udc_otg.o COBJS-$(CONFIG_USBDOWNLOAD_GADGET) += g_dnl.o COBJS-$(CONFIG_DFU_FUNCTION) += f_dfu.o endif ifdef CONFIG_USB_ETHER -COBJS-y += ether.o epautoconf.o config.o usbstring.o +COBJS-y += ether.o COBJS-$(CONFIG_USB_ETH_RNDIS) += rndis.o COBJS-$(CONFIG_MV_UDC) += mv_udc.o COBJS-$(CONFIG_CPU_PXA25X) += pxa25x_udc.o diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index ebb5131a9c..2c5600ed52 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -859,6 +859,25 @@ unknown: if (&f->list == &cdev->config->functions) f = NULL; break; + /* + * dfu-util (version 0.5) sets bmRequestType.Receipent = Device + * for non-standard request (w_value = 0x21, + * bRequest = GET_DESCRIPTOR in this case). + * When only one interface is registered (as it is done now), + * then this request shall be handled as it was requested for + * interface. + * + * In the below code it is checked if only one interface is + * present and proper function for it is extracted. Due to that + * function's setup (f->setup) is called to handle this + * special non-standard request. + */ + case USB_RECIP_DEVICE: + debug("cdev->config->next_interface_id: %d intf: %d\n", + cdev->config->next_interface_id, intf); + if (cdev->config->next_interface_id == 1) + f = cdev->config->interface[intf]; + break; } if (f && f->setup) diff --git a/drivers/usb/gadget/f_dfu.c b/drivers/usb/gadget/f_dfu.c index 10547e3279..a322ae5eb8 100644 --- a/drivers/usb/gadget/f_dfu.c +++ b/drivers/usb/gadget/f_dfu.c @@ -164,6 +164,9 @@ static void handle_getstatus(struct usb_request *req) /* send status response */ dstat->bStatus = f_dfu->dfu_status; + dstat->bwPollTimeout[0] = 0; + dstat->bwPollTimeout[1] = 0; + dstat->bwPollTimeout[2] = 0; dstat->bState = f_dfu->dfu_state; dstat->iString = 0; } diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c new file mode 100644 index 0000000000..c28866f7d3 --- /dev/null +++ b/drivers/usb/gadget/f_mass_storage.c @@ -0,0 +1,2793 @@ +/* + * f_mass_storage.c -- Mass Storage USB Composite Function + * + * Copyright (C) 2003-2008 Alan Stern + * Copyright (C) 2009 Samsung Electronics + * Author: Michal Nazarewicz <m.nazarewicz@samsung.com> + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The names of the above-listed copyright holders may not be used + * to endorse or promote products derived from this software without + * specific prior written permission. + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, + * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, + * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, + * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +/* + * The Mass Storage Function acts as a USB Mass Storage device, + * appearing to the host as a disk drive or as a CD-ROM drive. In + * addition to providing an example of a genuinely useful composite + * function for a USB device, it also illustrates a technique of + * double-buffering for increased throughput. + * + * Function supports multiple logical units (LUNs). Backing storage + * for each LUN is provided by a regular file or a block device. + * Access for each LUN can be limited to read-only. Moreover, the + * function can indicate that LUN is removable and/or CD-ROM. (The + * later implies read-only access.) + * + * MSF is configured by specifying a fsg_config structure. It has the + * following fields: + * + * nluns Number of LUNs function have (anywhere from 1 + * to FSG_MAX_LUNS which is 8). + * luns An array of LUN configuration values. This + * should be filled for each LUN that + * function will include (ie. for "nluns" + * LUNs). Each element of the array has + * the following fields: + * ->filename The path to the backing file for the LUN. + * Required if LUN is not marked as + * removable. + * ->ro Flag specifying access to the LUN shall be + * read-only. This is implied if CD-ROM + * emulation is enabled as well as when + * it was impossible to open "filename" + * in R/W mode. + * ->removable Flag specifying that LUN shall be indicated as + * being removable. + * ->cdrom Flag specifying that LUN shall be reported as + * being a CD-ROM. + * + * lun_name_format A printf-like format for names of the LUN + * devices. This determines how the + * directory in sysfs will be named. + * Unless you are using several MSFs in + * a single gadget (as opposed to single + * MSF in many configurations) you may + * leave it as NULL (in which case + * "lun%d" will be used). In the format + * you can use "%d" to index LUNs for + * MSF's with more than one LUN. (Beware + * that there is only one integer given + * as an argument for the format and + * specifying invalid format may cause + * unspecified behaviour.) + * thread_name Name of the kernel thread process used by the + * MSF. You can safely set it to NULL + * (in which case default "file-storage" + * will be used). + * + * vendor_name + * product_name + * release Information used as a reply to INQUIRY + * request. To use default set to NULL, + * NULL, 0xffff respectively. The first + * field should be 8 and the second 16 + * characters or less. + * + * can_stall Set to permit function to halt bulk endpoints. + * Disabled on some USB devices known not + * to work correctly. You should set it + * to true. + * + * If "removable" is not set for a LUN then a backing file must be + * specified. If it is set, then NULL filename means the LUN's medium + * is not loaded (an empty string as "filename" in the fsg_config + * structure causes error). The CD-ROM emulation includes a single + * data track and no audio tracks; hence there need be only one + * backing file per LUN. Note also that the CD-ROM block length is + * set to 512 rather than the more common value 2048. + * + * + * MSF includes support for module parameters. If gadget using it + * decides to use it, the following module parameters will be + * available: + * + * file=filename[,filename...] + * Names of the files or block devices used for + * backing storage. + * ro=b[,b...] Default false, boolean for read-only access. + * removable=b[,b...] + * Default true, boolean for removable media. + * cdrom=b[,b...] Default false, boolean for whether to emulate + * a CD-ROM drive. + * luns=N Default N = number of filenames, number of + * LUNs to support. + * stall Default determined according to the type of + * USB device controller (usually true), + * boolean to permit the driver to halt + * bulk endpoints. + * + * The module parameters may be prefixed with some string. You need + * to consult gadget's documentation or source to verify whether it is + * using those module parameters and if it does what are the prefixes + * (look for FSG_MODULE_PARAMETERS() macro usage, what's inside it is + * the prefix). + * + * + * Requirements are modest; only a bulk-in and a bulk-out endpoint are + * needed. The memory requirement amounts to two 16K buffers, size + * configurable by a parameter. Support is included for both + * full-speed and high-speed operation. + * + * Note that the driver is slightly non-portable in that it assumes a + * single memory/DMA buffer will be useable for bulk-in, bulk-out, and + * interrupt-in endpoints. With most device controllers this isn't an + * issue, but there may be some with hardware restrictions that prevent + * a buffer from being used by more than one endpoint. + * + * + * The pathnames of the backing files and the ro settings are + * available in the attribute files "file" and "ro" in the lun<n> (or + * to be more precise in a directory which name comes from + * "lun_name_format" option!) subdirectory of the gadget's sysfs + * directory. If the "removable" option is set, writing to these + * files will simulate ejecting/loading the medium (writing an empty + * line means eject) and adjusting a write-enable tab. Changes to the + * ro setting are not allowed when the medium is loaded or if CD-ROM + * emulation is being used. + * + * When a LUN receive an "eject" SCSI request (Start/Stop Unit), + * if the LUN is removable, the backing file is released to simulate + * ejection. + * + * + * This function is heavily based on "File-backed Storage Gadget" by + * Alan Stern which in turn is heavily based on "Gadget Zero" by David + * Brownell. The driver's SCSI command interface was based on the + * "Information technology - Small Computer System Interface - 2" + * document from X3T9.2 Project 375D, Revision 10L, 7-SEP-93, + * available at <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. + * The single exception is opcode 0x23 (READ FORMAT CAPACITIES), which + * was based on the "Universal Serial Bus Mass Storage Class UFI + * Command Specification" document, Revision 1.0, December 14, 1998, + * available at + * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>. + */ + + +/* + * Driver Design + * + * The MSF is fairly straightforward. There is a main kernel + * thread that handles most of the work. Interrupt routines field + * callbacks from the controller driver: bulk- and interrupt-request + * completion notifications, endpoint-0 events, and disconnect events. + * Completion events are passed to the main thread by wakeup calls. Many + * ep0 requests are handled at interrupt time, but SetInterface, + * SetConfiguration, and device reset requests are forwarded to the + * thread in the form of "exceptions" using SIGUSR1 signals (since they + * should interrupt any ongoing file I/O operations). + * + * The thread's main routine implements the standard command/data/status + * parts of a SCSI interaction. It and its subroutines are full of tests + * for pending signals/exceptions -- all this polling is necessary since + * the kernel has no setjmp/longjmp equivalents. (Maybe this is an + * indication that the driver really wants to be running in userspace.) + * An important point is that so long as the thread is alive it keeps an + * open reference to the backing file. This will prevent unmounting + * the backing file's underlying filesystem and could cause problems + * during system shutdown, for example. To prevent such problems, the + * thread catches INT, TERM, and KILL signals and converts them into + * an EXIT exception. + * + * In normal operation the main thread is started during the gadget's + * fsg_bind() callback and stopped during fsg_unbind(). But it can + * also exit when it receives a signal, and there's no point leaving + * the gadget running when the thread is dead. At of this moment, MSF + * provides no way to deregister the gadget when thread dies -- maybe + * a callback functions is needed. + * + * To provide maximum throughput, the driver uses a circular pipeline of + * buffer heads (struct fsg_buffhd). In principle the pipeline can be + * arbitrarily long; in practice the benefits don't justify having more + * than 2 stages (i.e., double buffering). But it helps to think of the + * pipeline as being a long one. Each buffer head contains a bulk-in and + * a bulk-out request pointer (since the buffer can be used for both + * output and input -- directions always are given from the host's + * point of view) as well as a pointer to the buffer and various state + * variables. + * + * Use of the pipeline follows a simple protocol. There is a variable + * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. + * At any time that buffer head may still be in use from an earlier + * request, so each buffer head has a state variable indicating whether + * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the + * buffer head to be EMPTY, filling the buffer either by file I/O or by + * USB I/O (during which the buffer head is BUSY), and marking the buffer + * head FULL when the I/O is complete. Then the buffer will be emptied + * (again possibly by USB I/O, during which it is marked BUSY) and + * finally marked EMPTY again (possibly by a completion routine). + * + * A module parameter tells the driver to avoid stalling the bulk + * endpoints wherever the transport specification allows. This is + * necessary for some UDCs like the SuperH, which cannot reliably clear a + * halt on a bulk endpoint. However, under certain circumstances the + * Bulk-only specification requires a stall. In such cases the driver + * will halt the endpoint and set a flag indicating that it should clear + * the halt in software during the next device reset. Hopefully this + * will permit everything to work correctly. Furthermore, although the + * specification allows the bulk-out endpoint to halt when the host sends + * too much data, implementing this would cause an unavoidable race. + * The driver will always use the "no-stall" approach for OUT transfers. + * + * One subtle point concerns sending status-stage responses for ep0 + * requests. Some of these requests, such as device reset, can involve + * interrupting an ongoing file I/O operation, which might take an + * arbitrarily long time. During that delay the host might give up on + * the original ep0 request and issue a new one. When that happens the + * driver should not notify the host about completion of the original + * request, as the host will no longer be waiting for it. So the driver + * assigns to each ep0 request a unique tag, and it keeps track of the + * tag value of the request associated with a long-running exception + * (device-reset, interface-change, or configuration-change). When the + * exception handler is finished, the status-stage response is submitted + * only if the current ep0 request tag is equal to the exception request + * tag. Thus only the most recently received ep0 request will get a + * status-stage response. + * + * Warning: This driver source file is too long. It ought to be split up + * into a header file plus about 3 separate .c files, to handle the details + * of the Gadget, USB Mass Storage, and SCSI protocols. + */ + +/* #define VERBOSE_DEBUG */ +/* #define DUMP_MSGS */ + +#include <config.h> +#include <malloc.h> +#include <common.h> + +#include <linux/err.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> +#include <usb_mass_storage.h> + +#include <asm/unaligned.h> +#include <linux/usb/gadget.h> +#include <linux/usb/gadget.h> +#include <linux/usb/composite.h> +#include <usb/lin_gadget_compat.h> + +/*------------------------------------------------------------------------*/ + +#define FSG_DRIVER_DESC "Mass Storage Function" +#define FSG_DRIVER_VERSION "2012/06/5" + +static const char fsg_string_interface[] = "Mass Storage"; + + +#define FSG_NO_INTR_EP 1 +#define FSG_NO_DEVICE_STRINGS 1 +#define FSG_NO_OTG 1 +#define FSG_NO_INTR_EP 1 + +#include "storage_common.c" + +/*-------------------------------------------------------------------------*/ + +#define GFP_ATOMIC ((gfp_t) 0) +#define PAGE_CACHE_SHIFT 12 +#define PAGE_CACHE_SIZE (1 << PAGE_CACHE_SHIFT) +#define kthread_create(...) __builtin_return_address(0) +#define wait_for_completion(...) do {} while (0) + +struct kref {int x; }; +struct completion {int x; }; + +inline void set_bit(int nr, volatile void *addr) +{ + int mask; + unsigned int *a = (unsigned int *) addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + *a |= mask; +} + +inline void clear_bit(int nr, volatile void *addr) +{ + int mask; + unsigned int *a = (unsigned int *) addr; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + *a &= ~mask; +} + +struct fsg_dev; +struct fsg_common; + +/* Data shared by all the FSG instances. */ +struct fsg_common { + struct usb_gadget *gadget; + struct fsg_dev *fsg, *new_fsg; + + struct usb_ep *ep0; /* Copy of gadget->ep0 */ + struct usb_request *ep0req; /* Copy of cdev->req */ + unsigned int ep0_req_tag; + + struct fsg_buffhd *next_buffhd_to_fill; + struct fsg_buffhd *next_buffhd_to_drain; + struct fsg_buffhd buffhds[FSG_NUM_BUFFERS]; + + int cmnd_size; + u8 cmnd[MAX_COMMAND_SIZE]; + + unsigned int nluns; + unsigned int lun; + struct fsg_lun luns[FSG_MAX_LUNS]; + + unsigned int bulk_out_maxpacket; + enum fsg_state state; /* For exception handling */ + unsigned int exception_req_tag; + + enum data_direction data_dir; + u32 data_size; + u32 data_size_from_cmnd; + u32 tag; + u32 residue; + u32 usb_amount_left; + + unsigned int can_stall:1; + unsigned int free_storage_on_release:1; + unsigned int phase_error:1; + unsigned int short_packet_received:1; + unsigned int bad_lun_okay:1; + unsigned int running:1; + + int thread_wakeup_needed; + struct completion thread_notifier; + struct task_struct *thread_task; + + /* Callback functions. */ + const struct fsg_operations *ops; + /* Gadget's private data. */ + void *private_data; + + const char *vendor_name; /* 8 characters or less */ + const char *product_name; /* 16 characters or less */ + u16 release; + + /* Vendor (8 chars), product (16 chars), release (4 + * hexadecimal digits) and NUL byte */ + char inquiry_string[8 + 16 + 4 + 1]; + + struct kref ref; +}; + +struct fsg_config { + unsigned nluns; + struct fsg_lun_config { + const char *filename; + char ro; + char removable; + char cdrom; + char nofua; + } luns[FSG_MAX_LUNS]; + + /* Callback functions. */ + const struct fsg_operations *ops; + /* Gadget's private data. */ + void *private_data; + + const char *vendor_name; /* 8 characters or less */ + const char *product_name; /* 16 characters or less */ + + char can_stall; +}; + +struct fsg_dev { + struct usb_function function; + struct usb_gadget *gadget; /* Copy of cdev->gadget */ + struct fsg_common *common; + + u16 interface_number; + + unsigned int bulk_in_enabled:1; + unsigned int bulk_out_enabled:1; + + unsigned long atomic_bitflags; +#define IGNORE_BULK_OUT 0 + + struct usb_ep *bulk_in; + struct usb_ep *bulk_out; +}; + + +static inline int __fsg_is_set(struct fsg_common *common, + const char *func, unsigned line) +{ + if (common->fsg) + return 1; + ERROR(common, "common->fsg is NULL in %s at %u\n", func, line); + WARN_ON(1); + return 0; +} + +#define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__)) + + +static inline struct fsg_dev *fsg_from_func(struct usb_function *f) +{ + return container_of(f, struct fsg_dev, function); +} + + +typedef void (*fsg_routine_t)(struct fsg_dev *); + +static int exception_in_progress(struct fsg_common *common) +{ + return common->state > FSG_STATE_IDLE; +} + +/* Make bulk-out requests be divisible by the maxpacket size */ +static void set_bulk_out_req_length(struct fsg_common *common, + struct fsg_buffhd *bh, unsigned int length) +{ + unsigned int rem; + + bh->bulk_out_intended_length = length; + rem = length % common->bulk_out_maxpacket; + if (rem > 0) + length += common->bulk_out_maxpacket - rem; + bh->outreq->length = length; +} + +/*-------------------------------------------------------------------------*/ + +struct ums_board_info *ums_info; +struct fsg_common *the_fsg_common; + +static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) +{ + const char *name; + + if (ep == fsg->bulk_in) + name = "bulk-in"; + else if (ep == fsg->bulk_out) + name = "bulk-out"; + else + name = ep->name; + DBG(fsg, "%s set halt\n", name); + return usb_ep_set_halt(ep); +} + +/*-------------------------------------------------------------------------*/ + +/* These routines may be called in process context or in_irq */ + +/* Caller must hold fsg->lock */ +static void wakeup_thread(struct fsg_common *common) +{ + common->thread_wakeup_needed = 1; +} + +static void raise_exception(struct fsg_common *common, enum fsg_state new_state) +{ + /* Do nothing if a higher-priority exception is already in progress. + * If a lower-or-equal priority exception is in progress, preempt it + * and notify the main thread by sending it a signal. */ + if (common->state <= new_state) { + common->exception_req_tag = common->ep0_req_tag; + common->state = new_state; + common->thread_wakeup_needed = 1; + } +} + +/*-------------------------------------------------------------------------*/ + +static int ep0_queue(struct fsg_common *common) +{ + int rc; + + rc = usb_ep_queue(common->ep0, common->ep0req, GFP_ATOMIC); + common->ep0->driver_data = common; + if (rc != 0 && rc != -ESHUTDOWN) { + /* We can't do much more than wait for a reset */ + WARNING(common, "error in submission: %s --> %d\n", + common->ep0->name, rc); + } + return rc; +} + +/*-------------------------------------------------------------------------*/ + +/* Bulk and interrupt endpoint completion handlers. + * These always run in_irq. */ + +static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct fsg_common *common = ep->driver_data; + struct fsg_buffhd *bh = req->context; + + if (req->status || req->actual != req->length) + DBG(common, "%s --> %d, %u/%u\n", __func__, + req->status, req->actual, req->length); + if (req->status == -ECONNRESET) /* Request was cancelled */ + usb_ep_fifo_flush(ep); + + /* Hold the lock while we update the request and buffer states */ + bh->inreq_busy = 0; + bh->state = BUF_STATE_EMPTY; + wakeup_thread(common); +} + +static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct fsg_common *common = ep->driver_data; + struct fsg_buffhd *bh = req->context; + + dump_msg(common, "bulk-out", req->buf, req->actual); + if (req->status || req->actual != bh->bulk_out_intended_length) + DBG(common, "%s --> %d, %u/%u\n", __func__, + req->status, req->actual, + bh->bulk_out_intended_length); + if (req->status == -ECONNRESET) /* Request was cancelled */ + usb_ep_fifo_flush(ep); + + /* Hold the lock while we update the request and buffer states */ + bh->outreq_busy = 0; + bh->state = BUF_STATE_FULL; + wakeup_thread(common); +} + +/*-------------------------------------------------------------------------*/ + +/* Ep0 class-specific handlers. These always run in_irq. */ + +static int fsg_setup(struct usb_function *f, + const struct usb_ctrlrequest *ctrl) +{ + struct fsg_dev *fsg = fsg_from_func(f); + struct usb_request *req = fsg->common->ep0req; + u16 w_index = le16_to_cpu(ctrl->wIndex); + u16 w_value = le16_to_cpu(ctrl->wValue); + u16 w_length = le16_to_cpu(ctrl->wLength); + + if (!fsg_is_set(fsg->common)) + return -EOPNOTSUPP; + + switch (ctrl->bRequest) { + + case USB_BULK_RESET_REQUEST: + if (ctrl->bRequestType != + (USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) + break; + if (w_index != fsg->interface_number || w_value != 0) + return -EDOM; + + /* Raise an exception to stop the current operation + * and reinitialize our state. */ + DBG(fsg, "bulk reset request\n"); + raise_exception(fsg->common, FSG_STATE_RESET); + return DELAYED_STATUS; + + case USB_BULK_GET_MAX_LUN_REQUEST: + if (ctrl->bRequestType != + (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE)) + break; + if (w_index != fsg->interface_number || w_value != 0) + return -EDOM; + VDBG(fsg, "get max LUN\n"); + *(u8 *) req->buf = fsg->common->nluns - 1; + + /* Respond with data/status */ + req->length = min((u16)1, w_length); + return ep0_queue(fsg->common); + } + + VDBG(fsg, + "unknown class-specific control req " + "%02x.%02x v%04x i%04x l%u\n", + ctrl->bRequestType, ctrl->bRequest, + le16_to_cpu(ctrl->wValue), w_index, w_length); + return -EOPNOTSUPP; +} + +/*-------------------------------------------------------------------------*/ + +/* All the following routines run in process context */ + +/* Use this for bulk or interrupt transfers, not ep0 */ +static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, + struct usb_request *req, int *pbusy, + enum fsg_buffer_state *state) +{ + int rc; + + if (ep == fsg->bulk_in) + dump_msg(fsg, "bulk-in", req->buf, req->length); + + *pbusy = 1; + *state = BUF_STATE_BUSY; + rc = usb_ep_queue(ep, req, GFP_KERNEL); + if (rc != 0) { + *pbusy = 0; + *state = BUF_STATE_EMPTY; + + /* We can't do much more than wait for a reset */ + + /* Note: currently the net2280 driver fails zero-length + * submissions if DMA is enabled. */ + if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP && + req->length == 0)) + WARNING(fsg, "error in submission: %s --> %d\n", + ep->name, rc); + } +} + +#define START_TRANSFER_OR(common, ep_name, req, pbusy, state) \ + if (fsg_is_set(common)) \ + start_transfer((common)->fsg, (common)->fsg->ep_name, \ + req, pbusy, state); \ + else + +#define START_TRANSFER(common, ep_name, req, pbusy, state) \ + START_TRANSFER_OR(common, ep_name, req, pbusy, state) (void)0 + +static void busy_indicator(void) +{ + static int state; + + switch (state) { + case 0: + puts("\r|"); break; + case 1: + puts("\r/"); break; + case 2: + puts("\r-"); break; + case 3: + puts("\r\\"); break; + case 4: + puts("\r|"); break; + case 5: + puts("\r/"); break; + case 6: + puts("\r-"); break; + case 7: + puts("\r\\"); break; + default: + state = 0; + } + if (state++ == 8) + state = 0; +} + +static int sleep_thread(struct fsg_common *common) +{ + int rc = 0; + int i = 0, k = 0; + + /* Wait until a signal arrives or we are woken up */ + for (;;) { + if (common->thread_wakeup_needed) + break; + + if (++i == 50000) { + busy_indicator(); + i = 0; + k++; + } + + usb_gadget_handle_interrupts(); + } + common->thread_wakeup_needed = 0; + return rc; +} + +/*-------------------------------------------------------------------------*/ + +static int do_read(struct fsg_common *common) +{ + struct fsg_lun *curlun = &common->luns[common->lun]; + u32 lba; + struct fsg_buffhd *bh; + int rc; + u32 amount_left; + loff_t file_offset; + unsigned int amount; + unsigned int partial_page; + ssize_t nread; + + /* Get the starting Logical Block Address and check that it's + * not too big */ + if (common->cmnd[0] == SC_READ_6) + lba = get_unaligned_be24(&common->cmnd[1]); + else { + lba = get_unaligned_be32(&common->cmnd[2]); + + /* We allow DPO (Disable Page Out = don't save data in the + * cache) and FUA (Force Unit Access = don't read from the + * cache), but we don't implement them. */ + if ((common->cmnd[1] & ~0x18) != 0) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + } + if (lba >= curlun->num_sectors) { + curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + return -EINVAL; + } + file_offset = ((loff_t) lba) << 9; + + /* Carry out the file reads */ + amount_left = common->data_size_from_cmnd; + if (unlikely(amount_left == 0)) + return -EIO; /* No default reply */ + + for (;;) { + + /* Figure out how much we need to read: + * Try to read the remaining amount. + * But don't read more than the buffer size. + * And don't try to read past the end of the file. + * Finally, if we're not at a page boundary, don't read past + * the next page. + * If this means reading 0 then we were asked to read past + * the end of file. */ + amount = min(amount_left, FSG_BUFLEN); + partial_page = file_offset & (PAGE_CACHE_SIZE - 1); + if (partial_page > 0) + amount = min(amount, (unsigned int) PAGE_CACHE_SIZE - + partial_page); + + /* Wait for the next buffer to become available */ + bh = common->next_buffhd_to_fill; + while (bh->state != BUF_STATE_EMPTY) { + rc = sleep_thread(common); + if (rc) + return rc; + } + + /* If we were asked to read past the end of file, + * end with an empty buffer. */ + if (amount == 0) { + curlun->sense_data = + SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + curlun->info_valid = 1; + bh->inreq->length = 0; + bh->state = BUF_STATE_FULL; + break; + } + + /* Perform the read */ + nread = 0; + rc = ums_info->read_sector(&(ums_info->ums_dev), + file_offset / SECTOR_SIZE, + amount / SECTOR_SIZE, + (char __user *)bh->buf); + if (rc) + return -EIO; + nread = amount; + + VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, + (unsigned long long) file_offset, + (int) nread); + + if (nread < 0) { + LDBG(curlun, "error in file read: %d\n", + (int) nread); + nread = 0; + } else if (nread < amount) { + LDBG(curlun, "partial file read: %d/%u\n", + (int) nread, amount); + nread -= (nread & 511); /* Round down to a block */ + } + file_offset += nread; + amount_left -= nread; + common->residue -= nread; + bh->inreq->length = nread; + bh->state = BUF_STATE_FULL; + + /* If an error occurred, report it and its position */ + if (nread < amount) { + curlun->sense_data = SS_UNRECOVERED_READ_ERROR; + curlun->info_valid = 1; + break; + } + + if (amount_left == 0) + break; /* No more left to read */ + + /* Send this buffer and go read some more */ + bh->inreq->zero = 0; + START_TRANSFER_OR(common, bulk_in, bh->inreq, + &bh->inreq_busy, &bh->state) + /* Don't know what to do if + * common->fsg is NULL */ + return -EIO; + common->next_buffhd_to_fill = bh->next; + } + + return -EIO; /* No default reply */ +} + +/*-------------------------------------------------------------------------*/ + +static int do_write(struct fsg_common *common) +{ + struct fsg_lun *curlun = &common->luns[common->lun]; + u32 lba; + struct fsg_buffhd *bh; + int get_some_more; + u32 amount_left_to_req, amount_left_to_write; + loff_t usb_offset, file_offset; + unsigned int amount; + unsigned int partial_page; + ssize_t nwritten; + int rc; + + if (curlun->ro) { + curlun->sense_data = SS_WRITE_PROTECTED; + return -EINVAL; + } + + /* Get the starting Logical Block Address and check that it's + * not too big */ + if (common->cmnd[0] == SC_WRITE_6) + lba = get_unaligned_be24(&common->cmnd[1]); + else { + lba = get_unaligned_be32(&common->cmnd[2]); + + /* We allow DPO (Disable Page Out = don't save data in the + * cache) and FUA (Force Unit Access = write directly to the + * medium). We don't implement DPO; we implement FUA by + * performing synchronous output. */ + if (common->cmnd[1] & ~0x18) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + } + if (lba >= curlun->num_sectors) { + curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + return -EINVAL; + } + + /* Carry out the file writes */ + get_some_more = 1; + file_offset = usb_offset = ((loff_t) lba) << 9; + amount_left_to_req = common->data_size_from_cmnd; + amount_left_to_write = common->data_size_from_cmnd; + + while (amount_left_to_write > 0) { + + /* Queue a request for more data from the host */ + bh = common->next_buffhd_to_fill; + if (bh->state == BUF_STATE_EMPTY && get_some_more) { + + /* Figure out how much we want to get: + * Try to get the remaining amount. + * But don't get more than the buffer size. + * And don't try to go past the end of the file. + * If we're not at a page boundary, + * don't go past the next page. + * If this means getting 0, then we were asked + * to write past the end of file. + * Finally, round down to a block boundary. */ + amount = min(amount_left_to_req, FSG_BUFLEN); + partial_page = usb_offset & (PAGE_CACHE_SIZE - 1); + if (partial_page > 0) + amount = min(amount, + (unsigned int) PAGE_CACHE_SIZE - partial_page); + + if (amount == 0) { + get_some_more = 0; + curlun->sense_data = + SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + curlun->info_valid = 1; + continue; + } + amount -= (amount & 511); + if (amount == 0) { + + /* Why were we were asked to transfer a + * partial block? */ + get_some_more = 0; + continue; + } + + /* Get the next buffer */ + usb_offset += amount; + common->usb_amount_left -= amount; + amount_left_to_req -= amount; + if (amount_left_to_req == 0) + get_some_more = 0; + + /* amount is always divisible by 512, hence by + * the bulk-out maxpacket size */ + bh->outreq->length = amount; + bh->bulk_out_intended_length = amount; + bh->outreq->short_not_ok = 1; + START_TRANSFER_OR(common, bulk_out, bh->outreq, + &bh->outreq_busy, &bh->state) + /* Don't know what to do if + * common->fsg is NULL */ + return -EIO; + common->next_buffhd_to_fill = bh->next; + continue; + } + + /* Write the received data to the backing file */ + bh = common->next_buffhd_to_drain; + if (bh->state == BUF_STATE_EMPTY && !get_some_more) + break; /* We stopped early */ + if (bh->state == BUF_STATE_FULL) { + common->next_buffhd_to_drain = bh->next; + bh->state = BUF_STATE_EMPTY; + + /* Did something go wrong with the transfer? */ + if (bh->outreq->status != 0) { + curlun->sense_data = SS_COMMUNICATION_FAILURE; + curlun->info_valid = 1; + break; + } + + amount = bh->outreq->actual; + + /* Perform the write */ + rc = ums_info->write_sector(&(ums_info->ums_dev), + file_offset / SECTOR_SIZE, + amount / SECTOR_SIZE, + (char __user *)bh->buf); + if (rc) + return -EIO; + nwritten = amount; + + VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, + (unsigned long long) file_offset, + (int) nwritten); + + if (nwritten < 0) { + LDBG(curlun, "error in file write: %d\n", + (int) nwritten); + nwritten = 0; + } else if (nwritten < amount) { + LDBG(curlun, "partial file write: %d/%u\n", + (int) nwritten, amount); + nwritten -= (nwritten & 511); + /* Round down to a block */ + } + file_offset += nwritten; + amount_left_to_write -= nwritten; + common->residue -= nwritten; + + /* If an error occurred, report it and its position */ + if (nwritten < amount) { + curlun->sense_data = SS_WRITE_ERROR; + curlun->info_valid = 1; + break; + } + + /* Did the host decide to stop early? */ + if (bh->outreq->actual != bh->outreq->length) { + common->short_packet_received = 1; + break; + } + continue; + } + + /* Wait for something to happen */ + rc = sleep_thread(common); + if (rc) + return rc; + } + + return -EIO; /* No default reply */ +} + +/*-------------------------------------------------------------------------*/ + +static int do_synchronize_cache(struct fsg_common *common) +{ + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int do_verify(struct fsg_common *common) +{ + struct fsg_lun *curlun = &common->luns[common->lun]; + u32 lba; + u32 verification_length; + struct fsg_buffhd *bh = common->next_buffhd_to_fill; + loff_t file_offset; + u32 amount_left; + unsigned int amount; + ssize_t nread; + int rc; + + /* Get the starting Logical Block Address and check that it's + * not too big */ + lba = get_unaligned_be32(&common->cmnd[2]); + if (lba >= curlun->num_sectors) { + curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + return -EINVAL; + } + + /* We allow DPO (Disable Page Out = don't save data in the + * cache) but we don't implement it. */ + if (common->cmnd[1] & ~0x10) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + verification_length = get_unaligned_be16(&common->cmnd[7]); + if (unlikely(verification_length == 0)) + return -EIO; /* No default reply */ + + /* Prepare to carry out the file verify */ + amount_left = verification_length << 9; + file_offset = ((loff_t) lba) << 9; + + /* Write out all the dirty buffers before invalidating them */ + + /* Just try to read the requested blocks */ + while (amount_left > 0) { + + /* Figure out how much we need to read: + * Try to read the remaining amount, but not more than + * the buffer size. + * And don't try to read past the end of the file. + * If this means reading 0 then we were asked to read + * past the end of file. */ + amount = min(amount_left, FSG_BUFLEN); + if (amount == 0) { + curlun->sense_data = + SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + curlun->info_valid = 1; + break; + } + + /* Perform the read */ + nread = 0; + rc = ums_info->read_sector(&(ums_info->ums_dev), + file_offset / SECTOR_SIZE, + amount / SECTOR_SIZE, + (char __user *)bh->buf); + if (rc) + return -EIO; + nread = amount; + + VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, + (unsigned long long) file_offset, + (int) nread); + if (nread < 0) { + LDBG(curlun, "error in file verify: %d\n", + (int) nread); + nread = 0; + } else if (nread < amount) { + LDBG(curlun, "partial file verify: %d/%u\n", + (int) nread, amount); + nread -= (nread & 511); /* Round down to a sector */ + } + if (nread == 0) { + curlun->sense_data = SS_UNRECOVERED_READ_ERROR; + curlun->info_valid = 1; + break; + } + file_offset += nread; + amount_left -= nread; + } + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = &common->luns[common->lun]; + static const char vendor_id[] = "Linux "; + u8 *buf = (u8 *) bh->buf; + + if (!curlun) { /* Unsupported LUNs are okay */ + common->bad_lun_okay = 1; + memset(buf, 0, 36); + buf[0] = 0x7f; /* Unsupported, no device-type */ + buf[4] = 31; /* Additional length */ + return 36; + } + + memset(buf, 0, 8); + buf[0] = TYPE_DISK; + buf[2] = 2; /* ANSI SCSI level 2 */ + buf[3] = 2; /* SCSI-2 INQUIRY data format */ + buf[4] = 31; /* Additional length */ + /* No special options */ + sprintf((char *) (buf + 8), "%-8s%-16s%04x", (char*) vendor_id , + ums_info->name, (u16) 0xffff); + + return 36; +} + + +static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = &common->luns[common->lun]; + u8 *buf = (u8 *) bh->buf; + u32 sd, sdinfo; + int valid; + + /* + * From the SCSI-2 spec., section 7.9 (Unit attention condition): + * + * If a REQUEST SENSE command is received from an initiator + * with a pending unit attention condition (before the target + * generates the contingent allegiance condition), then the + * target shall either: + * a) report any pending sense data and preserve the unit + * attention condition on the logical unit, or, + * b) report the unit attention condition, may discard any + * pending sense data, and clear the unit attention + * condition on the logical unit for that initiator. + * + * FSG normally uses option a); enable this code to use option b). + */ +#if 0 + if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { + curlun->sense_data = curlun->unit_attention_data; + curlun->unit_attention_data = SS_NO_SENSE; + } +#endif + + if (!curlun) { /* Unsupported LUNs are okay */ + common->bad_lun_okay = 1; + sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; + sdinfo = 0; + valid = 0; + } else { + sd = curlun->sense_data; + valid = curlun->info_valid << 7; + curlun->sense_data = SS_NO_SENSE; + curlun->info_valid = 0; + } + + memset(buf, 0, 18); + buf[0] = valid | 0x70; /* Valid, current error */ + buf[2] = SK(sd); + put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ + buf[7] = 18 - 8; /* Additional sense length */ + buf[12] = ASC(sd); + buf[13] = ASCQ(sd); + return 18; +} + +static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = &common->luns[common->lun]; + u32 lba = get_unaligned_be32(&common->cmnd[2]); + int pmi = common->cmnd[8]; + u8 *buf = (u8 *) bh->buf; + + /* Check the PMI and LBA fields */ + if (pmi > 1 || (pmi == 0 && lba != 0)) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); + /* Max logical block */ + put_unaligned_be32(512, &buf[4]); /* Block length */ + return 8; +} + +static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = &common->luns[common->lun]; + int msf = common->cmnd[1] & 0x02; + u32 lba = get_unaligned_be32(&common->cmnd[2]); + u8 *buf = (u8 *) bh->buf; + + if (common->cmnd[1] & ~0x02) { /* Mask away MSF */ + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + if (lba >= curlun->num_sectors) { + curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; + return -EINVAL; + } + + memset(buf, 0, 8); + buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ + store_cdrom_address(&buf[4], msf, lba); + return 8; +} + + +static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = &common->luns[common->lun]; + int msf = common->cmnd[1] & 0x02; + int start_track = common->cmnd[6]; + u8 *buf = (u8 *) bh->buf; + + if ((common->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ + start_track > 1) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + memset(buf, 0, 20); + buf[1] = (20-2); /* TOC data length */ + buf[2] = 1; /* First track number */ + buf[3] = 1; /* Last track number */ + buf[5] = 0x16; /* Data track, copying allowed */ + buf[6] = 0x01; /* Only track is number 1 */ + store_cdrom_address(&buf[8], msf, 0); + + buf[13] = 0x16; /* Lead-out track is data */ + buf[14] = 0xAA; /* Lead-out track number */ + store_cdrom_address(&buf[16], msf, curlun->num_sectors); + + return 20; +} + +static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = &common->luns[common->lun]; + int mscmnd = common->cmnd[0]; + u8 *buf = (u8 *) bh->buf; + u8 *buf0 = buf; + int pc, page_code; + int changeable_values, all_pages; + int valid_page = 0; + int len, limit; + + if ((common->cmnd[1] & ~0x08) != 0) { /* Mask away DBD */ + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + pc = common->cmnd[2] >> 6; + page_code = common->cmnd[2] & 0x3f; + if (pc == 3) { + curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; + return -EINVAL; + } + changeable_values = (pc == 1); + all_pages = (page_code == 0x3f); + + /* Write the mode parameter header. Fixed values are: default + * medium type, no cache control (DPOFUA), and no block descriptors. + * The only variable value is the WriteProtect bit. We will fill in + * the mode data length later. */ + memset(buf, 0, 8); + if (mscmnd == SC_MODE_SENSE_6) { + buf[2] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */ + buf += 4; + limit = 255; + } else { /* SC_MODE_SENSE_10 */ + buf[3] = (curlun->ro ? 0x80 : 0x00); /* WP, DPOFUA */ + buf += 8; + limit = 65535; /* Should really be FSG_BUFLEN */ + } + + /* No block descriptors */ + + /* The mode pages, in numerical order. The only page we support + * is the Caching page. */ + if (page_code == 0x08 || all_pages) { + valid_page = 1; + buf[0] = 0x08; /* Page code */ + buf[1] = 10; /* Page length */ + memset(buf+2, 0, 10); /* None of the fields are changeable */ + + if (!changeable_values) { + buf[2] = 0x04; /* Write cache enable, */ + /* Read cache not disabled */ + /* No cache retention priorities */ + put_unaligned_be16(0xffff, &buf[4]); + /* Don't disable prefetch */ + /* Minimum prefetch = 0 */ + put_unaligned_be16(0xffff, &buf[8]); + /* Maximum prefetch */ + put_unaligned_be16(0xffff, &buf[10]); + /* Maximum prefetch ceiling */ + } + buf += 12; + } + + /* Check that a valid page was requested and the mode data length + * isn't too long. */ + len = buf - buf0; + if (!valid_page || len > limit) { + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + /* Store the mode data length */ + if (mscmnd == SC_MODE_SENSE_6) + buf0[0] = len - 1; + else + put_unaligned_be16(len - 2, buf0); + return len; +} + + +static int do_start_stop(struct fsg_common *common) +{ + struct fsg_lun *curlun = &common->luns[common->lun]; + + if (!curlun) { + return -EINVAL; + } else if (!curlun->removable) { + curlun->sense_data = SS_INVALID_COMMAND; + return -EINVAL; + } + + return 0; +} + +static int do_prevent_allow(struct fsg_common *common) +{ + struct fsg_lun *curlun = &common->luns[common->lun]; + int prevent; + + if (!curlun->removable) { + curlun->sense_data = SS_INVALID_COMMAND; + return -EINVAL; + } + + prevent = common->cmnd[4] & 0x01; + if ((common->cmnd[4] & ~0x01) != 0) { /* Mask away Prevent */ + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + + if (curlun->prevent_medium_removal && !prevent) + fsg_lun_fsync_sub(curlun); + curlun->prevent_medium_removal = prevent; + return 0; +} + + +static int do_read_format_capacities(struct fsg_common *common, + struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = &common->luns[common->lun]; + u8 *buf = (u8 *) bh->buf; + + buf[0] = buf[1] = buf[2] = 0; + buf[3] = 8; /* Only the Current/Maximum Capacity Descriptor */ + buf += 4; + + put_unaligned_be32(curlun->num_sectors, &buf[0]); + /* Number of blocks */ + put_unaligned_be32(512, &buf[4]); /* Block length */ + buf[4] = 0x02; /* Current capacity */ + return 12; +} + + +static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh) +{ + struct fsg_lun *curlun = &common->luns[common->lun]; + + /* We don't support MODE SELECT */ + if (curlun) + curlun->sense_data = SS_INVALID_COMMAND; + return -EINVAL; +} + + +/*-------------------------------------------------------------------------*/ + +static int halt_bulk_in_endpoint(struct fsg_dev *fsg) +{ + int rc; + + rc = fsg_set_halt(fsg, fsg->bulk_in); + if (rc == -EAGAIN) + VDBG(fsg, "delayed bulk-in endpoint halt\n"); + while (rc != 0) { + if (rc != -EAGAIN) { + WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); + rc = 0; + break; + } + + rc = usb_ep_set_halt(fsg->bulk_in); + } + return rc; +} + +static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) +{ + int rc; + + DBG(fsg, "bulk-in set wedge\n"); + rc = 0; /* usb_ep_set_wedge(fsg->bulk_in); */ + if (rc == -EAGAIN) + VDBG(fsg, "delayed bulk-in endpoint wedge\n"); + while (rc != 0) { + if (rc != -EAGAIN) { + WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); + rc = 0; + break; + } + } + return rc; +} + +static int pad_with_zeros(struct fsg_dev *fsg) +{ + struct fsg_buffhd *bh = fsg->common->next_buffhd_to_fill; + u32 nkeep = bh->inreq->length; + u32 nsend; + int rc; + + bh->state = BUF_STATE_EMPTY; /* For the first iteration */ + fsg->common->usb_amount_left = nkeep + fsg->common->residue; + while (fsg->common->usb_amount_left > 0) { + + /* Wait for the next buffer to be free */ + while (bh->state != BUF_STATE_EMPTY) { + rc = sleep_thread(fsg->common); + if (rc) + return rc; + } + + nsend = min(fsg->common->usb_amount_left, FSG_BUFLEN); + memset(bh->buf + nkeep, 0, nsend - nkeep); + bh->inreq->length = nsend; + bh->inreq->zero = 0; + start_transfer(fsg, fsg->bulk_in, bh->inreq, + &bh->inreq_busy, &bh->state); + bh = fsg->common->next_buffhd_to_fill = bh->next; + fsg->common->usb_amount_left -= nsend; + nkeep = 0; + } + return 0; +} + +static int throw_away_data(struct fsg_common *common) +{ + struct fsg_buffhd *bh; + u32 amount; + int rc; + + for (bh = common->next_buffhd_to_drain; + bh->state != BUF_STATE_EMPTY || common->usb_amount_left > 0; + bh = common->next_buffhd_to_drain) { + + /* Throw away the data in a filled buffer */ + if (bh->state == BUF_STATE_FULL) { + bh->state = BUF_STATE_EMPTY; + common->next_buffhd_to_drain = bh->next; + + /* A short packet or an error ends everything */ + if (bh->outreq->actual != bh->outreq->length || + bh->outreq->status != 0) { + raise_exception(common, + FSG_STATE_ABORT_BULK_OUT); + return -EINTR; + } + continue; + } + + /* Try to submit another request if we need one */ + bh = common->next_buffhd_to_fill; + if (bh->state == BUF_STATE_EMPTY + && common->usb_amount_left > 0) { + amount = min(common->usb_amount_left, FSG_BUFLEN); + + /* amount is always divisible by 512, hence by + * the bulk-out maxpacket size */ + bh->outreq->length = amount; + bh->bulk_out_intended_length = amount; + bh->outreq->short_not_ok = 1; + START_TRANSFER_OR(common, bulk_out, bh->outreq, + &bh->outreq_busy, &bh->state) + /* Don't know what to do if + * common->fsg is NULL */ + return -EIO; + common->next_buffhd_to_fill = bh->next; + common->usb_amount_left -= amount; + continue; + } + + /* Otherwise wait for something to happen */ + rc = sleep_thread(common); + if (rc) + return rc; + } + return 0; +} + + +static int finish_reply(struct fsg_common *common) +{ + struct fsg_buffhd *bh = common->next_buffhd_to_fill; + int rc = 0; + + switch (common->data_dir) { + case DATA_DIR_NONE: + break; /* Nothing to send */ + + /* If we don't know whether the host wants to read or write, + * this must be CB or CBI with an unknown command. We mustn't + * try to send or receive any data. So stall both bulk pipes + * if we can and wait for a reset. */ + case DATA_DIR_UNKNOWN: + if (!common->can_stall) { + /* Nothing */ + } else if (fsg_is_set(common)) { + fsg_set_halt(common->fsg, common->fsg->bulk_out); + rc = halt_bulk_in_endpoint(common->fsg); + } else { + /* Don't know what to do if common->fsg is NULL */ + rc = -EIO; + } + break; + + /* All but the last buffer of data must have already been sent */ + case DATA_DIR_TO_HOST: + if (common->data_size == 0) { + /* Nothing to send */ + + /* If there's no residue, simply send the last buffer */ + } else if (common->residue == 0) { + bh->inreq->zero = 0; + START_TRANSFER_OR(common, bulk_in, bh->inreq, + &bh->inreq_busy, &bh->state) + return -EIO; + common->next_buffhd_to_fill = bh->next; + + /* For Bulk-only, if we're allowed to stall then send the + * short packet and halt the bulk-in endpoint. If we can't + * stall, pad out the remaining data with 0's. */ + } else if (common->can_stall) { + bh->inreq->zero = 1; + START_TRANSFER_OR(common, bulk_in, bh->inreq, + &bh->inreq_busy, &bh->state) + /* Don't know what to do if + * common->fsg is NULL */ + rc = -EIO; + common->next_buffhd_to_fill = bh->next; + if (common->fsg) + rc = halt_bulk_in_endpoint(common->fsg); + } else if (fsg_is_set(common)) { + rc = pad_with_zeros(common->fsg); + } else { + /* Don't know what to do if common->fsg is NULL */ + rc = -EIO; + } + break; + + /* We have processed all we want from the data the host has sent. + * There may still be outstanding bulk-out requests. */ + case DATA_DIR_FROM_HOST: + if (common->residue == 0) { + /* Nothing to receive */ + + /* Did the host stop sending unexpectedly early? */ + } else if (common->short_packet_received) { + raise_exception(common, FSG_STATE_ABORT_BULK_OUT); + rc = -EINTR; + + /* We haven't processed all the incoming data. Even though + * we may be allowed to stall, doing so would cause a race. + * The controller may already have ACK'ed all the remaining + * bulk-out packets, in which case the host wouldn't see a + * STALL. Not realizing the endpoint was halted, it wouldn't + * clear the halt -- leading to problems later on. */ +#if 0 + } else if (common->can_stall) { + if (fsg_is_set(common)) + fsg_set_halt(common->fsg, + common->fsg->bulk_out); + raise_exception(common, FSG_STATE_ABORT_BULK_OUT); + rc = -EINTR; +#endif + + /* We can't stall. Read in the excess data and throw it + * all away. */ + } else { + rc = throw_away_data(common); + } + break; + } + return rc; +} + + +static int send_status(struct fsg_common *common) +{ + struct fsg_lun *curlun = &common->luns[common->lun]; + struct fsg_buffhd *bh; + struct bulk_cs_wrap *csw; + int rc; + u8 status = USB_STATUS_PASS; + u32 sd, sdinfo = 0; + + /* Wait for the next buffer to become available */ + bh = common->next_buffhd_to_fill; + while (bh->state != BUF_STATE_EMPTY) { + rc = sleep_thread(common); + if (rc) + return rc; + } + + if (curlun) + sd = curlun->sense_data; + else if (common->bad_lun_okay) + sd = SS_NO_SENSE; + else + sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; + + if (common->phase_error) { + DBG(common, "sending phase-error status\n"); + status = USB_STATUS_PHASE_ERROR; + sd = SS_INVALID_COMMAND; + } else if (sd != SS_NO_SENSE) { + DBG(common, "sending command-failure status\n"); + status = USB_STATUS_FAIL; + VDBG(common, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" + " info x%x\n", + SK(sd), ASC(sd), ASCQ(sd), sdinfo); + } + + /* Store and send the Bulk-only CSW */ + csw = (void *)bh->buf; + + csw->Signature = cpu_to_le32(USB_BULK_CS_SIG); + csw->Tag = common->tag; + csw->Residue = cpu_to_le32(common->residue); + csw->Status = status; + + bh->inreq->length = USB_BULK_CS_WRAP_LEN; + bh->inreq->zero = 0; + START_TRANSFER_OR(common, bulk_in, bh->inreq, + &bh->inreq_busy, &bh->state) + /* Don't know what to do if common->fsg is NULL */ + return -EIO; + + common->next_buffhd_to_fill = bh->next; + return 0; +} + + +/*-------------------------------------------------------------------------*/ + +/* Check whether the command is properly formed and whether its data size + * and direction agree with the values we already have. */ +static int check_command(struct fsg_common *common, int cmnd_size, + enum data_direction data_dir, unsigned int mask, + int needs_medium, const char *name) +{ + int i; + int lun = common->cmnd[1] >> 5; + static const char dirletter[4] = {'u', 'o', 'i', 'n'}; + char hdlen[20]; + struct fsg_lun *curlun; + + hdlen[0] = 0; + if (common->data_dir != DATA_DIR_UNKNOWN) + sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir], + common->data_size); + VDBG(common, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", + name, cmnd_size, dirletter[(int) data_dir], + common->data_size_from_cmnd, common->cmnd_size, hdlen); + + /* We can't reply at all until we know the correct data direction + * and size. */ + if (common->data_size_from_cmnd == 0) + data_dir = DATA_DIR_NONE; + if (common->data_size < common->data_size_from_cmnd) { + /* Host data size < Device data size is a phase error. + * Carry out the command, but only transfer as much as + * we are allowed. */ + common->data_size_from_cmnd = common->data_size; + common->phase_error = 1; + } + common->residue = common->data_size; + common->usb_amount_left = common->data_size; + + /* Conflicting data directions is a phase error */ + if (common->data_dir != data_dir + && common->data_size_from_cmnd > 0) { + common->phase_error = 1; + return -EINVAL; + } + + /* Verify the length of the command itself */ + if (cmnd_size != common->cmnd_size) { + + /* Special case workaround: There are plenty of buggy SCSI + * implementations. Many have issues with cbw->Length + * field passing a wrong command size. For those cases we + * always try to work around the problem by using the length + * sent by the host side provided it is at least as large + * as the correct command length. + * Examples of such cases would be MS-Windows, which issues + * REQUEST SENSE with cbw->Length == 12 where it should + * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and + * REQUEST SENSE with cbw->Length == 10 where it should + * be 6 as well. + */ + if (cmnd_size <= common->cmnd_size) { + DBG(common, "%s is buggy! Expected length %d " + "but we got %d\n", name, + cmnd_size, common->cmnd_size); + cmnd_size = common->cmnd_size; + } else { + common->phase_error = 1; + return -EINVAL; + } + } + + /* Check that the LUN values are consistent */ + if (common->lun != lun) + DBG(common, "using LUN %d from CBW, not LUN %d from CDB\n", + common->lun, lun); + + /* Check the LUN */ + if (common->lun >= 0 && common->lun < common->nluns) { + curlun = &common->luns[common->lun]; + if (common->cmnd[0] != SC_REQUEST_SENSE) { + curlun->sense_data = SS_NO_SENSE; + curlun->info_valid = 0; + } + } else { + curlun = NULL; + common->bad_lun_okay = 0; + + /* INQUIRY and REQUEST SENSE commands are explicitly allowed + * to use unsupported LUNs; all others may not. */ + if (common->cmnd[0] != SC_INQUIRY && + common->cmnd[0] != SC_REQUEST_SENSE) { + DBG(common, "unsupported LUN %d\n", common->lun); + return -EINVAL; + } + } +#if 0 + /* If a unit attention condition exists, only INQUIRY and + * REQUEST SENSE commands are allowed; anything else must fail. */ + if (curlun && curlun->unit_attention_data != SS_NO_SENSE && + common->cmnd[0] != SC_INQUIRY && + common->cmnd[0] != SC_REQUEST_SENSE) { + curlun->sense_data = curlun->unit_attention_data; + curlun->unit_attention_data = SS_NO_SENSE; + return -EINVAL; + } +#endif + /* Check that only command bytes listed in the mask are non-zero */ + common->cmnd[1] &= 0x1f; /* Mask away the LUN */ + for (i = 1; i < cmnd_size; ++i) { + if (common->cmnd[i] && !(mask & (1 << i))) { + if (curlun) + curlun->sense_data = SS_INVALID_FIELD_IN_CDB; + return -EINVAL; + } + } + + return 0; +} + + +static int do_scsi_command(struct fsg_common *common) +{ + struct fsg_buffhd *bh; + int rc; + int reply = -EINVAL; + int i; + static char unknown[16]; + struct fsg_lun *curlun = &common->luns[common->lun]; + + dump_cdb(common); + + /* Wait for the next buffer to become available for data or status */ + bh = common->next_buffhd_to_fill; + common->next_buffhd_to_drain = bh; + while (bh->state != BUF_STATE_EMPTY) { + rc = sleep_thread(common); + if (rc) + return rc; + } + common->phase_error = 0; + common->short_packet_received = 0; + + down_read(&common->filesem); /* We're using the backing file */ + switch (common->cmnd[0]) { + + case SC_INQUIRY: + common->data_size_from_cmnd = common->cmnd[4]; + reply = check_command(common, 6, DATA_DIR_TO_HOST, + (1<<4), 0, + "INQUIRY"); + if (reply == 0) + reply = do_inquiry(common, bh); + break; + + case SC_MODE_SELECT_6: + common->data_size_from_cmnd = common->cmnd[4]; + reply = check_command(common, 6, DATA_DIR_FROM_HOST, + (1<<1) | (1<<4), 0, + "MODE SELECT(6)"); + if (reply == 0) + reply = do_mode_select(common, bh); + break; + + case SC_MODE_SELECT_10: + common->data_size_from_cmnd = + get_unaligned_be16(&common->cmnd[7]); + reply = check_command(common, 10, DATA_DIR_FROM_HOST, + (1<<1) | (3<<7), 0, + "MODE SELECT(10)"); + if (reply == 0) + reply = do_mode_select(common, bh); + break; + + case SC_MODE_SENSE_6: + common->data_size_from_cmnd = common->cmnd[4]; + reply = check_command(common, 6, DATA_DIR_TO_HOST, + (1<<1) | (1<<2) | (1<<4), 0, + "MODE SENSE(6)"); + if (reply == 0) + reply = do_mode_sense(common, bh); + break; + + case SC_MODE_SENSE_10: + common->data_size_from_cmnd = + get_unaligned_be16(&common->cmnd[7]); + reply = check_command(common, 10, DATA_DIR_TO_HOST, + (1<<1) | (1<<2) | (3<<7), 0, + "MODE SENSE(10)"); + if (reply == 0) + reply = do_mode_sense(common, bh); + break; + + case SC_PREVENT_ALLOW_MEDIUM_REMOVAL: + common->data_size_from_cmnd = 0; + reply = check_command(common, 6, DATA_DIR_NONE, + (1<<4), 0, + "PREVENT-ALLOW MEDIUM REMOVAL"); + if (reply == 0) + reply = do_prevent_allow(common); + break; + + case SC_READ_6: + i = common->cmnd[4]; + common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; + reply = check_command(common, 6, DATA_DIR_TO_HOST, + (7<<1) | (1<<4), 1, + "READ(6)"); + if (reply == 0) + reply = do_read(common); + break; + + case SC_READ_10: + common->data_size_from_cmnd = + get_unaligned_be16(&common->cmnd[7]) << 9; + reply = check_command(common, 10, DATA_DIR_TO_HOST, + (1<<1) | (0xf<<2) | (3<<7), 1, + "READ(10)"); + if (reply == 0) + reply = do_read(common); + break; + + case SC_READ_12: + common->data_size_from_cmnd = + get_unaligned_be32(&common->cmnd[6]) << 9; + reply = check_command(common, 12, DATA_DIR_TO_HOST, + (1<<1) | (0xf<<2) | (0xf<<6), 1, + "READ(12)"); + if (reply == 0) + reply = do_read(common); + break; + + case SC_READ_CAPACITY: + common->data_size_from_cmnd = 8; + reply = check_command(common, 10, DATA_DIR_TO_HOST, + (0xf<<2) | (1<<8), 1, + "READ CAPACITY"); + if (reply == 0) + reply = do_read_capacity(common, bh); + break; + + case SC_READ_HEADER: + if (!common->luns[common->lun].cdrom) + goto unknown_cmnd; + common->data_size_from_cmnd = + get_unaligned_be16(&common->cmnd[7]); + reply = check_command(common, 10, DATA_DIR_TO_HOST, + (3<<7) | (0x1f<<1), 1, + "READ HEADER"); + if (reply == 0) + reply = do_read_header(common, bh); + break; + + case SC_READ_TOC: + if (!common->luns[common->lun].cdrom) + goto unknown_cmnd; + common->data_size_from_cmnd = + get_unaligned_be16(&common->cmnd[7]); + reply = check_command(common, 10, DATA_DIR_TO_HOST, + (7<<6) | (1<<1), 1, + "READ TOC"); + if (reply == 0) + reply = do_read_toc(common, bh); + break; + + case SC_READ_FORMAT_CAPACITIES: + common->data_size_from_cmnd = + get_unaligned_be16(&common->cmnd[7]); + reply = check_command(common, 10, DATA_DIR_TO_HOST, + (3<<7), 1, + "READ FORMAT CAPACITIES"); + if (reply == 0) + reply = do_read_format_capacities(common, bh); + break; + + case SC_REQUEST_SENSE: + common->data_size_from_cmnd = common->cmnd[4]; + reply = check_command(common, 6, DATA_DIR_TO_HOST, + (1<<4), 0, + "REQUEST SENSE"); + if (reply == 0) + reply = do_request_sense(common, bh); + break; + + case SC_START_STOP_UNIT: + common->data_size_from_cmnd = 0; + reply = check_command(common, 6, DATA_DIR_NONE, + (1<<1) | (1<<4), 0, + "START-STOP UNIT"); + if (reply == 0) + reply = do_start_stop(common); + break; + + case SC_SYNCHRONIZE_CACHE: + common->data_size_from_cmnd = 0; + reply = check_command(common, 10, DATA_DIR_NONE, + (0xf<<2) | (3<<7), 1, + "SYNCHRONIZE CACHE"); + if (reply == 0) + reply = do_synchronize_cache(common); + break; + + case SC_TEST_UNIT_READY: + common->data_size_from_cmnd = 0; + reply = check_command(common, 6, DATA_DIR_NONE, + 0, 1, + "TEST UNIT READY"); + break; + + /* Although optional, this command is used by MS-Windows. We + * support a minimal version: BytChk must be 0. */ + case SC_VERIFY: + common->data_size_from_cmnd = 0; + reply = check_command(common, 10, DATA_DIR_NONE, + (1<<1) | (0xf<<2) | (3<<7), 1, + "VERIFY"); + if (reply == 0) + reply = do_verify(common); + break; + + case SC_WRITE_6: + i = common->cmnd[4]; + common->data_size_from_cmnd = (i == 0 ? 256 : i) << 9; + reply = check_command(common, 6, DATA_DIR_FROM_HOST, + (7<<1) | (1<<4), 1, + "WRITE(6)"); + if (reply == 0) + reply = do_write(common); + break; + + case SC_WRITE_10: + common->data_size_from_cmnd = + get_unaligned_be16(&common->cmnd[7]) << 9; + reply = check_command(common, 10, DATA_DIR_FROM_HOST, + (1<<1) | (0xf<<2) | (3<<7), 1, + "WRITE(10)"); + if (reply == 0) + reply = do_write(common); + break; + + case SC_WRITE_12: + common->data_size_from_cmnd = + get_unaligned_be32(&common->cmnd[6]) << 9; + reply = check_command(common, 12, DATA_DIR_FROM_HOST, + (1<<1) | (0xf<<2) | (0xf<<6), 1, + "WRITE(12)"); + if (reply == 0) + reply = do_write(common); + break; + + /* Some mandatory commands that we recognize but don't implement. + * They don't mean much in this setting. It's left as an exercise + * for anyone interested to implement RESERVE and RELEASE in terms + * of Posix locks. */ + case SC_FORMAT_UNIT: + case SC_RELEASE: + case SC_RESERVE: + case SC_SEND_DIAGNOSTIC: + /* Fall through */ + + default: +unknown_cmnd: + common->data_size_from_cmnd = 0; + sprintf(unknown, "Unknown x%02x", common->cmnd[0]); + reply = check_command(common, common->cmnd_size, + DATA_DIR_UNKNOWN, 0xff, 0, unknown); + if (reply == 0) { + curlun->sense_data = SS_INVALID_COMMAND; + reply = -EINVAL; + } + break; + } + up_read(&common->filesem); + + if (reply == -EINTR) + return -EINTR; + + /* Set up the single reply buffer for finish_reply() */ + if (reply == -EINVAL) + reply = 0; /* Error reply length */ + if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) { + reply = min((u32) reply, common->data_size_from_cmnd); + bh->inreq->length = reply; + bh->state = BUF_STATE_FULL; + common->residue -= reply; + } /* Otherwise it's already set */ + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) +{ + struct usb_request *req = bh->outreq; + struct fsg_bulk_cb_wrap *cbw = req->buf; + struct fsg_common *common = fsg->common; + + /* Was this a real packet? Should it be ignored? */ + if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) + return -EINVAL; + + /* Is the CBW valid? */ + if (req->actual != USB_BULK_CB_WRAP_LEN || + cbw->Signature != cpu_to_le32( + USB_BULK_CB_SIG)) { + DBG(fsg, "invalid CBW: len %u sig 0x%x\n", + req->actual, + le32_to_cpu(cbw->Signature)); + + /* The Bulk-only spec says we MUST stall the IN endpoint + * (6.6.1), so it's unavoidable. It also says we must + * retain this state until the next reset, but there's + * no way to tell the controller driver it should ignore + * Clear-Feature(HALT) requests. + * + * We aren't required to halt the OUT endpoint; instead + * we can simply accept and discard any data received + * until the next reset. */ + wedge_bulk_in_endpoint(fsg); + set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); + return -EINVAL; + } + + /* Is the CBW meaningful? */ + if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG || + cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) { + DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " + "cmdlen %u\n", + cbw->Lun, cbw->Flags, cbw->Length); + + /* We can do anything we want here, so let's stall the + * bulk pipes if we are allowed to. */ + if (common->can_stall) { + fsg_set_halt(fsg, fsg->bulk_out); + halt_bulk_in_endpoint(fsg); + } + return -EINVAL; + } + + /* Save the command for later */ + common->cmnd_size = cbw->Length; + memcpy(common->cmnd, cbw->CDB, common->cmnd_size); + if (cbw->Flags & USB_BULK_IN_FLAG) + common->data_dir = DATA_DIR_TO_HOST; + else + common->data_dir = DATA_DIR_FROM_HOST; + common->data_size = le32_to_cpu(cbw->DataTransferLength); + if (common->data_size == 0) + common->data_dir = DATA_DIR_NONE; + common->lun = cbw->Lun; + common->tag = cbw->Tag; + return 0; +} + + +static int get_next_command(struct fsg_common *common) +{ + struct fsg_buffhd *bh; + int rc = 0; + + /* Wait for the next buffer to become available */ + bh = common->next_buffhd_to_fill; + while (bh->state != BUF_STATE_EMPTY) { + rc = sleep_thread(common); + if (rc) + return rc; + } + + /* Queue a request to read a Bulk-only CBW */ + set_bulk_out_req_length(common, bh, USB_BULK_CB_WRAP_LEN); + bh->outreq->short_not_ok = 1; + START_TRANSFER_OR(common, bulk_out, bh->outreq, + &bh->outreq_busy, &bh->state) + /* Don't know what to do if common->fsg is NULL */ + return -EIO; + + /* We will drain the buffer in software, which means we + * can reuse it for the next filling. No need to advance + * next_buffhd_to_fill. */ + + /* Wait for the CBW to arrive */ + while (bh->state != BUF_STATE_FULL) { + rc = sleep_thread(common); + if (rc) + return rc; + } + + rc = fsg_is_set(common) ? received_cbw(common->fsg, bh) : -EIO; + bh->state = BUF_STATE_EMPTY; + + return rc; +} + + +/*-------------------------------------------------------------------------*/ + +static int enable_endpoint(struct fsg_common *common, struct usb_ep *ep, + const struct usb_endpoint_descriptor *d) +{ + int rc; + + ep->driver_data = common; + rc = usb_ep_enable(ep, d); + if (rc) + ERROR(common, "can't enable %s, result %d\n", ep->name, rc); + return rc; +} + +static int alloc_request(struct fsg_common *common, struct usb_ep *ep, + struct usb_request **preq) +{ + *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); + if (*preq) + return 0; + ERROR(common, "can't allocate request for %s\n", ep->name); + return -ENOMEM; +} + +/* Reset interface setting and re-init endpoint state (toggle etc). */ +static int do_set_interface(struct fsg_common *common, struct fsg_dev *new_fsg) +{ + const struct usb_endpoint_descriptor *d; + struct fsg_dev *fsg; + int i, rc = 0; + + if (common->running) + DBG(common, "reset interface\n"); + +reset: + /* Deallocate the requests */ + if (common->fsg) { + fsg = common->fsg; + + for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + struct fsg_buffhd *bh = &common->buffhds[i]; + + if (bh->inreq) { + usb_ep_free_request(fsg->bulk_in, bh->inreq); + bh->inreq = NULL; + } + if (bh->outreq) { + usb_ep_free_request(fsg->bulk_out, bh->outreq); + bh->outreq = NULL; + } + } + + /* Disable the endpoints */ + if (fsg->bulk_in_enabled) { + usb_ep_disable(fsg->bulk_in); + fsg->bulk_in_enabled = 0; + } + if (fsg->bulk_out_enabled) { + usb_ep_disable(fsg->bulk_out); + fsg->bulk_out_enabled = 0; + } + + common->fsg = NULL; + /* wake_up(&common->fsg_wait); */ + } + + common->running = 0; + if (!new_fsg || rc) + return rc; + + common->fsg = new_fsg; + fsg = common->fsg; + + /* Enable the endpoints */ + d = fsg_ep_desc(common->gadget, + &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc); + rc = enable_endpoint(common, fsg->bulk_in, d); + if (rc) + goto reset; + fsg->bulk_in_enabled = 1; + + d = fsg_ep_desc(common->gadget, + &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc); + rc = enable_endpoint(common, fsg->bulk_out, d); + if (rc) + goto reset; + fsg->bulk_out_enabled = 1; + common->bulk_out_maxpacket = le16_to_cpu(d->wMaxPacketSize); + clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); + + /* Allocate the requests */ + for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + struct fsg_buffhd *bh = &common->buffhds[i]; + + rc = alloc_request(common, fsg->bulk_in, &bh->inreq); + if (rc) + goto reset; + rc = alloc_request(common, fsg->bulk_out, &bh->outreq); + if (rc) + goto reset; + bh->inreq->buf = bh->outreq->buf = bh->buf; + bh->inreq->context = bh->outreq->context = bh; + bh->inreq->complete = bulk_in_complete; + bh->outreq->complete = bulk_out_complete; + } + + common->running = 1; + + return rc; +} + + +/****************************** ALT CONFIGS ******************************/ + + +static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) +{ + struct fsg_dev *fsg = fsg_from_func(f); + fsg->common->new_fsg = fsg; + raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); + return 0; +} + +static void fsg_disable(struct usb_function *f) +{ + struct fsg_dev *fsg = fsg_from_func(f); + fsg->common->new_fsg = NULL; + raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); +} + +/*-------------------------------------------------------------------------*/ + +static void handle_exception(struct fsg_common *common) +{ + int i; + struct fsg_buffhd *bh; + enum fsg_state old_state; + struct fsg_lun *curlun; + unsigned int exception_req_tag; + + /* Cancel all the pending transfers */ + if (common->fsg) { + for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + bh = &common->buffhds[i]; + if (bh->inreq_busy) + usb_ep_dequeue(common->fsg->bulk_in, bh->inreq); + if (bh->outreq_busy) + usb_ep_dequeue(common->fsg->bulk_out, + bh->outreq); + } + + /* Wait until everything is idle */ + for (;;) { + int num_active = 0; + for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + bh = &common->buffhds[i]; + num_active += bh->inreq_busy + bh->outreq_busy; + } + if (num_active == 0) + break; + if (sleep_thread(common)) + return; + } + + /* Clear out the controller's fifos */ + if (common->fsg->bulk_in_enabled) + usb_ep_fifo_flush(common->fsg->bulk_in); + if (common->fsg->bulk_out_enabled) + usb_ep_fifo_flush(common->fsg->bulk_out); + } + + /* Reset the I/O buffer states and pointers, the SCSI + * state, and the exception. Then invoke the handler. */ + + for (i = 0; i < FSG_NUM_BUFFERS; ++i) { + bh = &common->buffhds[i]; + bh->state = BUF_STATE_EMPTY; + } + common->next_buffhd_to_fill = &common->buffhds[0]; + common->next_buffhd_to_drain = &common->buffhds[0]; + exception_req_tag = common->exception_req_tag; + old_state = common->state; + + if (old_state == FSG_STATE_ABORT_BULK_OUT) + common->state = FSG_STATE_STATUS_PHASE; + else { + for (i = 0; i < common->nluns; ++i) { + curlun = &common->luns[i]; + curlun->sense_data = SS_NO_SENSE; + curlun->info_valid = 0; + } + common->state = FSG_STATE_IDLE; + } + + /* Carry out any extra actions required for the exception */ + switch (old_state) { + case FSG_STATE_ABORT_BULK_OUT: + send_status(common); + + if (common->state == FSG_STATE_STATUS_PHASE) + common->state = FSG_STATE_IDLE; + break; + + case FSG_STATE_RESET: + /* In case we were forced against our will to halt a + * bulk endpoint, clear the halt now. (The SuperH UDC + * requires this.) */ + if (!fsg_is_set(common)) + break; + if (test_and_clear_bit(IGNORE_BULK_OUT, + &common->fsg->atomic_bitflags)) + usb_ep_clear_halt(common->fsg->bulk_in); + + if (common->ep0_req_tag == exception_req_tag) + ep0_queue(common); /* Complete the status stage */ + + break; + + case FSG_STATE_CONFIG_CHANGE: + do_set_interface(common, common->new_fsg); + break; + + case FSG_STATE_EXIT: + case FSG_STATE_TERMINATED: + do_set_interface(common, NULL); /* Free resources */ + common->state = FSG_STATE_TERMINATED; /* Stop the thread */ + break; + + case FSG_STATE_INTERFACE_CHANGE: + case FSG_STATE_DISCONNECT: + case FSG_STATE_COMMAND_PHASE: + case FSG_STATE_DATA_PHASE: + case FSG_STATE_STATUS_PHASE: + case FSG_STATE_IDLE: + break; + } +} + +/*-------------------------------------------------------------------------*/ + +int fsg_main_thread(void *common_) +{ + struct fsg_common *common = the_fsg_common; + /* The main loop */ + do { + if (exception_in_progress(common)) { + handle_exception(common); + continue; + } + + if (!common->running) { + sleep_thread(common); + continue; + } + + if (get_next_command(common)) + continue; + + if (!exception_in_progress(common)) + common->state = FSG_STATE_DATA_PHASE; + + if (do_scsi_command(common) || finish_reply(common)) + continue; + + if (!exception_in_progress(common)) + common->state = FSG_STATE_STATUS_PHASE; + + if (send_status(common)) + continue; + + if (!exception_in_progress(common)) + common->state = FSG_STATE_IDLE; + } while (0); + + common->thread_task = NULL; + + return 0; +} + +static void fsg_common_release(struct kref *ref); + +static struct fsg_common *fsg_common_init(struct fsg_common *common, + struct usb_composite_dev *cdev) +{ + struct usb_gadget *gadget = cdev->gadget; + struct fsg_buffhd *bh; + struct fsg_lun *curlun; + int nluns, i, rc; + + /* Find out how many LUNs there should be */ + nluns = 1; + if (nluns < 1 || nluns > FSG_MAX_LUNS) { + printf("invalid number of LUNs: %u\n", nluns); + return ERR_PTR(-EINVAL); + } + + /* Allocate? */ + if (!common) { + common = calloc(sizeof *common, 1); + if (!common) + return ERR_PTR(-ENOMEM); + common->free_storage_on_release = 1; + } else { + memset(common, 0, sizeof common); + common->free_storage_on_release = 0; + } + + common->ops = NULL; + common->private_data = NULL; + + common->gadget = gadget; + common->ep0 = gadget->ep0; + common->ep0req = cdev->req; + + /* Maybe allocate device-global string IDs, and patch descriptors */ + if (fsg_strings[FSG_STRING_INTERFACE].id == 0) { + rc = usb_string_id(cdev); + if (unlikely(rc < 0)) + goto error_release; + fsg_strings[FSG_STRING_INTERFACE].id = rc; + fsg_intf_desc.iInterface = rc; + } + + /* Create the LUNs, open their backing files, and register the + * LUN devices in sysfs. */ + curlun = calloc(nluns, sizeof *curlun); + if (!curlun) { + rc = -ENOMEM; + goto error_release; + } + common->nluns = nluns; + + for (i = 0; i < nluns; i++) { + common->luns[i].removable = 1; + + rc = fsg_lun_open(&common->luns[i], ""); + if (rc) + goto error_luns; + } + common->lun = 0; + + /* Data buffers cyclic list */ + bh = common->buffhds; + + i = FSG_NUM_BUFFERS; + goto buffhds_first_it; + do { + bh->next = bh + 1; + ++bh; +buffhds_first_it: + bh->inreq_busy = 0; + bh->outreq_busy = 0; + bh->buf = kmalloc(FSG_BUFLEN, GFP_KERNEL); + if (unlikely(!bh->buf)) { + rc = -ENOMEM; + goto error_release; + } + } while (--i); + bh->next = common->buffhds; + + snprintf(common->inquiry_string, sizeof common->inquiry_string, + "%-8s%-16s%04x", + "Linux ", + "File-Store Gadget", + 0xffff); + + /* Some peripheral controllers are known not to be able to + * halt bulk endpoints correctly. If one of them is present, + * disable stalls. + */ + + /* Tell the thread to start working */ + common->thread_task = + kthread_create(fsg_main_thread, common, + OR(cfg->thread_name, "file-storage")); + if (IS_ERR(common->thread_task)) { + rc = PTR_ERR(common->thread_task); + goto error_release; + } + +#undef OR + /* Information */ + INFO(common, FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n"); + INFO(common, "Number of LUNs=%d\n", common->nluns); + + return common; + +error_luns: + common->nluns = i + 1; +error_release: + common->state = FSG_STATE_TERMINATED; /* The thread is dead */ + /* Call fsg_common_release() directly, ref might be not + * initialised */ + fsg_common_release(&common->ref); + return ERR_PTR(rc); +} + +static void fsg_common_release(struct kref *ref) +{ + struct fsg_common *common = container_of(ref, struct fsg_common, ref); + + /* If the thread isn't already dead, tell it to exit now */ + if (common->state != FSG_STATE_TERMINATED) { + raise_exception(common, FSG_STATE_EXIT); + wait_for_completion(&common->thread_notifier); + } + + if (likely(common->luns)) { + struct fsg_lun *lun = common->luns; + unsigned i = common->nluns; + + /* In error recovery common->nluns may be zero. */ + for (; i; --i, ++lun) + fsg_lun_close(lun); + + kfree(common->luns); + } + + { + struct fsg_buffhd *bh = common->buffhds; + unsigned i = FSG_NUM_BUFFERS; + do { + kfree(bh->buf); + } while (++bh, --i); + } + + if (common->free_storage_on_release) + kfree(common); +} + + +/*-------------------------------------------------------------------------*/ + +/** + * usb_copy_descriptors - copy a vector of USB descriptors + * @src: null-terminated vector to copy + * Context: initialization code, which may sleep + * + * This makes a copy of a vector of USB descriptors. Its primary use + * is to support usb_function objects which can have multiple copies, + * each needing different descriptors. Functions may have static + * tables of descriptors, which are used as templates and customized + * with identifiers (for interfaces, strings, endpoints, and more) + * as needed by a given function instance. + */ +struct usb_descriptor_header ** +usb_copy_descriptors(struct usb_descriptor_header **src) +{ + struct usb_descriptor_header **tmp; + unsigned bytes; + unsigned n_desc; + void *mem; + struct usb_descriptor_header **ret; + + /* count descriptors and their sizes; then add vector size */ + for (bytes = 0, n_desc = 0, tmp = src; *tmp; tmp++, n_desc++) + bytes += (*tmp)->bLength; + bytes += (n_desc + 1) * sizeof(*tmp); + + mem = kmalloc(bytes, GFP_KERNEL); + if (!mem) + return NULL; + + /* fill in pointers starting at "tmp", + * to descriptors copied starting at "mem"; + * and return "ret" + */ + tmp = mem; + ret = mem; + mem += (n_desc + 1) * sizeof(*tmp); + while (*src) { + memcpy(mem, *src, (*src)->bLength); + *tmp = mem; + tmp++; + mem += (*src)->bLength; + src++; + } + *tmp = NULL; + + return ret; +} + + + +static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) +{ + struct fsg_dev *fsg = fsg_from_func(f); + + DBG(fsg, "unbind\n"); + if (fsg->common->fsg == fsg) { + fsg->common->new_fsg = NULL; + raise_exception(fsg->common, FSG_STATE_CONFIG_CHANGE); + } + + free(fsg->function.descriptors); + free(fsg->function.hs_descriptors); + kfree(fsg); +} + +static int fsg_bind(struct usb_configuration *c, struct usb_function *f) +{ + struct fsg_dev *fsg = fsg_from_func(f); + struct usb_gadget *gadget = c->cdev->gadget; + int i; + struct usb_ep *ep; + fsg->gadget = gadget; + + /* New interface */ + i = usb_interface_id(c, f); + if (i < 0) + return i; + fsg_intf_desc.bInterfaceNumber = i; + fsg->interface_number = i; + + /* Find all the endpoints we will use */ + ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); + if (!ep) + goto autoconf_fail; + ep->driver_data = fsg->common; /* claim the endpoint */ + fsg->bulk_in = ep; + + ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); + if (!ep) + goto autoconf_fail; + ep->driver_data = fsg->common; /* claim the endpoint */ + fsg->bulk_out = ep; + + /* Copy descriptors */ + f->descriptors = usb_copy_descriptors(fsg_fs_function); + if (unlikely(!f->descriptors)) + return -ENOMEM; + + if (gadget_is_dualspeed(gadget)) { + /* Assume endpoint addresses are the same for both speeds */ + fsg_hs_bulk_in_desc.bEndpointAddress = + fsg_fs_bulk_in_desc.bEndpointAddress; + fsg_hs_bulk_out_desc.bEndpointAddress = + fsg_fs_bulk_out_desc.bEndpointAddress; + f->hs_descriptors = usb_copy_descriptors(fsg_hs_function); + if (unlikely(!f->hs_descriptors)) { + free(f->descriptors); + return -ENOMEM; + } + } + return 0; + +autoconf_fail: + ERROR(fsg, "unable to autoconfigure all endpoints\n"); + return -ENOTSUPP; +} + + +/****************************** ADD FUNCTION ******************************/ + +static struct usb_gadget_strings *fsg_strings_array[] = { + &fsg_stringtab, + NULL, +}; + +static int fsg_bind_config(struct usb_composite_dev *cdev, + struct usb_configuration *c, + struct fsg_common *common) +{ + struct fsg_dev *fsg; + int rc; + + fsg = calloc(1, sizeof *fsg); + if (!fsg) + return -ENOMEM; + fsg->function.name = FSG_DRIVER_DESC; + fsg->function.strings = fsg_strings_array; + fsg->function.bind = fsg_bind; + fsg->function.unbind = fsg_unbind; + fsg->function.setup = fsg_setup; + fsg->function.set_alt = fsg_set_alt; + fsg->function.disable = fsg_disable; + + fsg->common = common; + common->fsg = fsg; + /* Our caller holds a reference to common structure so we + * don't have to be worry about it being freed until we return + * from this function. So instead of incrementing counter now + * and decrement in error recovery we increment it only when + * call to usb_add_function() was successful. */ + + rc = usb_add_function(c, &fsg->function); + + if (rc) + kfree(fsg); + + return rc; +} + +int fsg_add(struct usb_configuration *c) +{ + struct fsg_common *fsg_common; + + fsg_common = fsg_common_init(NULL, c->cdev); + + fsg_common->vendor_name = 0; + fsg_common->product_name = 0; + fsg_common->release = 0xffff; + + fsg_common->ops = NULL; + fsg_common->private_data = NULL; + + the_fsg_common = fsg_common; + + return fsg_bind_config(c->cdev, c, fsg_common); +} + +int fsg_init(struct ums_board_info *ums) +{ + ums_info = ums; + + return 0; +} diff --git a/drivers/usb/gadget/g_dnl.c b/drivers/usb/gadget/g_dnl.c index a5a4c1fe65..cc3f3449c9 100644 --- a/drivers/usb/gadget/g_dnl.c +++ b/drivers/usb/gadget/g_dnl.c @@ -31,6 +31,7 @@ #include "gadget_chips.h" #include "composite.c" +#include "f_mass_storage.c" /* * One needs to define the following: @@ -104,6 +105,8 @@ static int g_dnl_do_config(struct usb_configuration *c) printf("GADGET DRIVER: %s\n", s); if (!strcmp(s, "usb_dnl_dfu")) ret = dfu_add(c); + else if (!strcmp(s, "usb_dnl_ums")) + ret = fsg_add(c); return ret; } @@ -188,6 +191,9 @@ int g_dnl_register(const char *type) if (!strcmp(type, "dfu")) { strcpy(name, shortname); strcat(name, type); + } else if (!strcmp(type, "ums")) { + strcpy(name, shortname); + strcat(name, type); } else { printf("%s: unknown command: %s\n", __func__, type); return -EINVAL; diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c new file mode 100644 index 0000000000..594dc10afa --- /dev/null +++ b/drivers/usb/gadget/storage_common.c @@ -0,0 +1,653 @@ +/* + * storage_common.c -- Common definitions for mass storage functionality + * + * Copyright (C) 2003-2008 Alan Stern + * Copyeight (C) 2009 Samsung Electronics + * Author: Michal Nazarewicz (m.nazarewicz@samsung.com) + * + * Ported to u-boot: + * Andrzej Pietrasiewicz <andrzej.p@samsung.com> + * + * Code refactoring & cleanup: + * Łukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +/* + * This file requires the following identifiers used in USB strings to + * be defined (each of type pointer to char): + * - fsg_string_manufacturer -- name of the manufacturer + * - fsg_string_product -- name of the product + * - fsg_string_serial -- product's serial + * - fsg_string_config -- name of the configuration + * - fsg_string_interface -- name of the interface + * The first four are only needed when FSG_DESCRIPTORS_DEVICE_STRINGS + * macro is defined prior to including this file. + */ + +/* + * When FSG_NO_INTR_EP is defined fsg_fs_intr_in_desc and + * fsg_hs_intr_in_desc objects as well as + * FSG_FS_FUNCTION_PRE_EP_ENTRIES and FSG_HS_FUNCTION_PRE_EP_ENTRIES + * macros are not defined. + * + * When FSG_NO_DEVICE_STRINGS is defined FSG_STRING_MANUFACTURER, + * FSG_STRING_PRODUCT, FSG_STRING_SERIAL and FSG_STRING_CONFIG are not + * defined (as well as corresponding entries in string tables are + * missing) and FSG_STRING_INTERFACE has value of zero. + * + * When FSG_NO_OTG is defined fsg_otg_desc won't be defined. + */ + +/* + * When FSG_BUFFHD_STATIC_BUFFER is defined when this file is included + * the fsg_buffhd structure's buf field will be an array of FSG_BUFLEN + * characters rather then a pointer to void. + */ + + +/* #include <asm/unaligned.h> */ + + +/* + * Thanks to NetChip Technologies for donating this product ID. + * + * DO NOT REUSE THESE IDs with any other driver!! Ever!! + * Instead: allocate your own, using normal USB-IF procedures. + */ +#define FSG_VENDOR_ID 0x0525 /* NetChip */ +#define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */ + +/*-------------------------------------------------------------------------*/ + +#ifndef DEBUG +#undef VERBOSE_DEBUG +#undef DUMP_MSGS +#endif /* !DEBUG */ + +#ifdef VERBOSE_DEBUG +#define VLDBG LDBG +#else +#define VLDBG(lun, fmt, args...) do { } while (0) +#endif /* VERBOSE_DEBUG */ + +/* +#define LDBG(lun, fmt, args...) dev_dbg (&(lun)->dev, fmt, ## args) +#define LERROR(lun, fmt, args...) dev_err (&(lun)->dev, fmt, ## args) +#define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args) +#define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args) +*/ + +#define LDBG(lun, fmt, args...) do { } while (0) +#define LERROR(lun, fmt, args...) do { } while (0) +#define LWARN(lun, fmt, args...) do { } while (0) +#define LINFO(lun, fmt, args...) do { } while (0) + +/* + * Keep those macros in sync with those in + * include/linux/usb/composite.h or else GCC will complain. If they + * are identical (the same names of arguments, white spaces in the + * same places) GCC will allow redefinition otherwise (even if some + * white space is removed or added) warning will be issued. + * + * Those macros are needed here because File Storage Gadget does not + * include the composite.h header. For composite gadgets those macros + * are redundant since composite.h is included any way. + * + * One could check whether those macros are already defined (which + * would indicate composite.h had been included) or not (which would + * indicate we were in FSG) but this is not done because a warning is + * desired if definitions here differ from the ones in composite.h. + * + * We want the definitions to match and be the same in File Storage + * Gadget as well as Mass Storage Function (and so composite gadgets + * using MSF). If someone changes them in composite.h it will produce + * a warning in this file when building MSF. + */ + +#define DBG(d, fmt, args...) debug(fmt , ## args) +#define VDBG(d, fmt, args...) debug(fmt , ## args) +/* #define ERROR(d, fmt, args...) printf(fmt , ## args) */ +/* #define WARNING(d, fmt, args...) printf(fmt , ## args) */ +/* #define INFO(d, fmt, args...) printf(fmt , ## args) */ + +/* #define DBG(d, fmt, args...) do { } while (0) */ +/* #define VDBG(d, fmt, args...) do { } while (0) */ +#define ERROR(d, fmt, args...) do { } while (0) +#define WARNING(d, fmt, args...) do { } while (0) +#define INFO(d, fmt, args...) do { } while (0) + +#ifdef DUMP_MSGS + +/* dump_msg(fsg, const char * label, const u8 * buf, unsigned length); */ +# define dump_msg(fsg, label, buf, length) do { \ + if (length < 512) { \ + DBG(fsg, "%s, length %u:\n", label, length); \ + print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \ + 16, 1, buf, length, 0); \ + } \ +} while (0) + +# define dump_cdb(fsg) do { } while (0) + +#else + +# define dump_msg(fsg, /* const char * */ label, \ + /* const u8 * */ buf, /* unsigned */ length) do { } while (0) + +# ifdef VERBOSE_DEBUG + +# define dump_cdb(fsg) \ + print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE, \ + 16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0) \ + +# else + +# define dump_cdb(fsg) do { } while (0) + +# endif /* VERBOSE_DEBUG */ + +#endif /* DUMP_MSGS */ + +/*-------------------------------------------------------------------------*/ + +/* SCSI device types */ +#define TYPE_DISK 0x00 +#define TYPE_CDROM 0x05 + +/* USB protocol value = the transport method */ +#define USB_PR_CBI 0x00 /* Control/Bulk/Interrupt */ +#define USB_PR_CB 0x01 /* Control/Bulk w/o interrupt */ +#define USB_PR_BULK 0x50 /* Bulk-only */ + +/* USB subclass value = the protocol encapsulation */ +#define USB_SC_RBC 0x01 /* Reduced Block Commands (flash) */ +#define USB_SC_8020 0x02 /* SFF-8020i, MMC-2, ATAPI (CD-ROM) */ +#define USB_SC_QIC 0x03 /* QIC-157 (tape) */ +#define USB_SC_UFI 0x04 /* UFI (floppy) */ +#define USB_SC_8070 0x05 /* SFF-8070i (removable) */ +#define USB_SC_SCSI 0x06 /* Transparent SCSI */ + +/* Bulk-only data structures */ + +/* Command Block Wrapper */ +struct fsg_bulk_cb_wrap { + __le32 Signature; /* Contains 'USBC' */ + u32 Tag; /* Unique per command id */ + __le32 DataTransferLength; /* Size of the data */ + u8 Flags; /* Direction in bit 7 */ + u8 Lun; /* LUN (normally 0) */ + u8 Length; /* Of the CDB, <= MAX_COMMAND_SIZE */ + u8 CDB[16]; /* Command Data Block */ +}; + +#define USB_BULK_CB_WRAP_LEN 31 +#define USB_BULK_CB_SIG 0x43425355 /* Spells out USBC */ +#define USB_BULK_IN_FLAG 0x80 + +/* Command Status Wrapper */ +struct bulk_cs_wrap { + __le32 Signature; /* Should = 'USBS' */ + u32 Tag; /* Same as original command */ + __le32 Residue; /* Amount not transferred */ + u8 Status; /* See below */ +}; + +#define USB_BULK_CS_WRAP_LEN 13 +#define USB_BULK_CS_SIG 0x53425355 /* Spells out 'USBS' */ +#define USB_STATUS_PASS 0 +#define USB_STATUS_FAIL 1 +#define USB_STATUS_PHASE_ERROR 2 + +/* Bulk-only class specific requests */ +#define USB_BULK_RESET_REQUEST 0xff +#define USB_BULK_GET_MAX_LUN_REQUEST 0xfe + +/* CBI Interrupt data structure */ +struct interrupt_data { + u8 bType; + u8 bValue; +}; + +#define CBI_INTERRUPT_DATA_LEN 2 + +/* CBI Accept Device-Specific Command request */ +#define USB_CBI_ADSC_REQUEST 0x00 + +/* Length of a SCSI Command Data Block */ +#define MAX_COMMAND_SIZE 16 + +/* SCSI commands that we recognize */ +#define SC_FORMAT_UNIT 0x04 +#define SC_INQUIRY 0x12 +#define SC_MODE_SELECT_6 0x15 +#define SC_MODE_SELECT_10 0x55 +#define SC_MODE_SENSE_6 0x1a +#define SC_MODE_SENSE_10 0x5a +#define SC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e +#define SC_READ_6 0x08 +#define SC_READ_10 0x28 +#define SC_READ_12 0xa8 +#define SC_READ_CAPACITY 0x25 +#define SC_READ_FORMAT_CAPACITIES 0x23 +#define SC_READ_HEADER 0x44 +#define SC_READ_TOC 0x43 +#define SC_RELEASE 0x17 +#define SC_REQUEST_SENSE 0x03 +#define SC_RESERVE 0x16 +#define SC_SEND_DIAGNOSTIC 0x1d +#define SC_START_STOP_UNIT 0x1b +#define SC_SYNCHRONIZE_CACHE 0x35 +#define SC_TEST_UNIT_READY 0x00 +#define SC_VERIFY 0x2f +#define SC_WRITE_6 0x0a +#define SC_WRITE_10 0x2a +#define SC_WRITE_12 0xaa + +/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */ +#define SS_NO_SENSE 0 +#define SS_COMMUNICATION_FAILURE 0x040800 +#define SS_INVALID_COMMAND 0x052000 +#define SS_INVALID_FIELD_IN_CDB 0x052400 +#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x052100 +#define SS_LOGICAL_UNIT_NOT_SUPPORTED 0x052500 +#define SS_MEDIUM_NOT_PRESENT 0x023a00 +#define SS_MEDIUM_REMOVAL_PREVENTED 0x055302 +#define SS_NOT_READY_TO_READY_TRANSITION 0x062800 +#define SS_RESET_OCCURRED 0x062900 +#define SS_SAVING_PARAMETERS_NOT_SUPPORTED 0x053900 +#define SS_UNRECOVERED_READ_ERROR 0x031100 +#define SS_WRITE_ERROR 0x030c02 +#define SS_WRITE_PROTECTED 0x072700 + +#define SK(x) ((u8) ((x) >> 16)) /* Sense Key byte, etc. */ +#define ASC(x) ((u8) ((x) >> 8)) +#define ASCQ(x) ((u8) (x)) + +struct device_attribute { int i; }; +struct rw_semaphore { int i; }; +#define down_write(...) do { } while (0) +#define up_write(...) do { } while (0) +#define down_read(...) do { } while (0) +#define up_read(...) do { } while (0) +#define ETOOSMALL 525 + +#include <usb_mass_storage.h> +extern struct ums_board_info *ums_info; + +/*-------------------------------------------------------------------------*/ + +struct fsg_lun { + loff_t file_length; + loff_t num_sectors; + + unsigned int initially_ro:1; + unsigned int ro:1; + unsigned int removable:1; + unsigned int cdrom:1; + unsigned int prevent_medium_removal:1; + unsigned int registered:1; + unsigned int info_valid:1; + unsigned int nofua:1; + + u32 sense_data; + u32 sense_data_info; + u32 unit_attention_data; + + struct device dev; +}; + +#define fsg_lun_is_open(curlun) ((curlun)->filp != NULL) +#if 0 +static struct fsg_lun *fsg_lun_from_dev(struct device *dev) +{ + return container_of(dev, struct fsg_lun, dev); +} +#endif + +/* Big enough to hold our biggest descriptor */ +#define EP0_BUFSIZE 256 +#define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */ + +/* Number of buffers we will use. 2 is enough for double-buffering */ +#define FSG_NUM_BUFFERS 2 + +/* Default size of buffer length. */ +#define FSG_BUFLEN ((u32)16384) + +/* Maximal number of LUNs supported in mass storage function */ +#define FSG_MAX_LUNS 8 + +enum fsg_buffer_state { + BUF_STATE_EMPTY = 0, + BUF_STATE_FULL, + BUF_STATE_BUSY +}; + +struct fsg_buffhd { +#ifdef FSG_BUFFHD_STATIC_BUFFER + char buf[FSG_BUFLEN]; +#else + void *buf; +#endif + enum fsg_buffer_state state; + struct fsg_buffhd *next; + + /* + * The NetChip 2280 is faster, and handles some protocol faults + * better, if we don't submit any short bulk-out read requests. + * So we will record the intended request length here. + */ + unsigned int bulk_out_intended_length; + + struct usb_request *inreq; + int inreq_busy; + struct usb_request *outreq; + int outreq_busy; +}; + +enum fsg_state { + /* This one isn't used anywhere */ + FSG_STATE_COMMAND_PHASE = -10, + FSG_STATE_DATA_PHASE, + FSG_STATE_STATUS_PHASE, + + FSG_STATE_IDLE = 0, + FSG_STATE_ABORT_BULK_OUT, + FSG_STATE_RESET, + FSG_STATE_INTERFACE_CHANGE, + FSG_STATE_CONFIG_CHANGE, + FSG_STATE_DISCONNECT, + FSG_STATE_EXIT, + FSG_STATE_TERMINATED +}; + +enum data_direction { + DATA_DIR_UNKNOWN = 0, + DATA_DIR_FROM_HOST, + DATA_DIR_TO_HOST, + DATA_DIR_NONE +}; + +/*-------------------------------------------------------------------------*/ + +static inline u32 get_unaligned_be24(u8 *buf) +{ + return 0xffffff & (u32) get_unaligned_be32(buf - 1); +} + +/*-------------------------------------------------------------------------*/ + +enum { +#ifndef FSG_NO_DEVICE_STRINGS + FSG_STRING_MANUFACTURER = 1, + FSG_STRING_PRODUCT, + FSG_STRING_SERIAL, + FSG_STRING_CONFIG, +#endif + FSG_STRING_INTERFACE +}; + +#ifndef FSG_NO_OTG +static struct usb_otg_descriptor +fsg_otg_desc = { + .bLength = sizeof fsg_otg_desc, + .bDescriptorType = USB_DT_OTG, + + .bmAttributes = USB_OTG_SRP, +}; +#endif + +/* There is only one interface. */ + +static struct usb_interface_descriptor +fsg_intf_desc = { + .bLength = sizeof fsg_intf_desc, + .bDescriptorType = USB_DT_INTERFACE, + + .bNumEndpoints = 2, /* Adjusted during fsg_bind() */ + .bInterfaceClass = USB_CLASS_MASS_STORAGE, + .bInterfaceSubClass = USB_SC_SCSI, /* Adjusted during fsg_bind() */ + .bInterfaceProtocol = USB_PR_BULK, /* Adjusted during fsg_bind() */ + .iInterface = FSG_STRING_INTERFACE, +}; + +/* + * Three full-speed endpoint descriptors: bulk-in, bulk-out, and + * interrupt-in. + */ + +static struct usb_endpoint_descriptor +fsg_fs_bulk_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + /* wMaxPacketSize set by autoconfiguration */ +}; + +static struct usb_endpoint_descriptor +fsg_fs_bulk_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_OUT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + /* wMaxPacketSize set by autoconfiguration */ +}; + +#ifndef FSG_NO_INTR_EP + +static struct usb_endpoint_descriptor +fsg_fs_intr_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + .bEndpointAddress = USB_DIR_IN, + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(2), + .bInterval = 32, /* frames -> 32 ms */ +}; + +#ifndef FSG_NO_OTG +# define FSG_FS_FUNCTION_PRE_EP_ENTRIES 2 +#else +# define FSG_FS_FUNCTION_PRE_EP_ENTRIES 1 +#endif + +#endif + +static struct usb_descriptor_header *fsg_fs_function[] = { +#ifndef FSG_NO_OTG + (struct usb_descriptor_header *) &fsg_otg_desc, +#endif + (struct usb_descriptor_header *) &fsg_intf_desc, + (struct usb_descriptor_header *) &fsg_fs_bulk_in_desc, + (struct usb_descriptor_header *) &fsg_fs_bulk_out_desc, +#ifndef FSG_NO_INTR_EP + (struct usb_descriptor_header *) &fsg_fs_intr_in_desc, +#endif + NULL, +}; + +/* + * USB 2.0 devices need to expose both high speed and full speed + * descriptors, unless they only run at full speed. + * + * That means alternate endpoint descriptors (bigger packets) + * and a "device qualifier" ... plus more construction options + * for the configuration descriptor. + */ +static struct usb_endpoint_descriptor +fsg_hs_bulk_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512), +}; + +static struct usb_endpoint_descriptor +fsg_hs_bulk_out_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .wMaxPacketSize = cpu_to_le16(512), + .bInterval = 1, /* NAK every 1 uframe */ +}; + +#ifndef FSG_NO_INTR_EP + +static struct usb_endpoint_descriptor +fsg_hs_intr_in_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + + /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */ + .bmAttributes = USB_ENDPOINT_XFER_INT, + .wMaxPacketSize = cpu_to_le16(2), + .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */ +}; + +#ifndef FSG_NO_OTG +# define FSG_HS_FUNCTION_PRE_EP_ENTRIES 2 +#else +# define FSG_HS_FUNCTION_PRE_EP_ENTRIES 1 +#endif + +#endif + +static struct usb_descriptor_header *fsg_hs_function[] = { +#ifndef FSG_NO_OTG + (struct usb_descriptor_header *) &fsg_otg_desc, +#endif + (struct usb_descriptor_header *) &fsg_intf_desc, + (struct usb_descriptor_header *) &fsg_hs_bulk_in_desc, + (struct usb_descriptor_header *) &fsg_hs_bulk_out_desc, +#ifndef FSG_NO_INTR_EP + (struct usb_descriptor_header *) &fsg_hs_intr_in_desc, +#endif + NULL, +}; + +/* Maxpacket and other transfer characteristics vary by speed. */ +static struct usb_endpoint_descriptor * +fsg_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs, + struct usb_endpoint_descriptor *hs) +{ + if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) + return hs; + return fs; +} + +/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */ +static struct usb_string fsg_strings[] = { +#ifndef FSG_NO_DEVICE_STRINGS + {FSG_STRING_MANUFACTURER, fsg_string_manufacturer}, + {FSG_STRING_PRODUCT, fsg_string_product}, + {FSG_STRING_SERIAL, fsg_string_serial}, + {FSG_STRING_CONFIG, fsg_string_config}, +#endif + {FSG_STRING_INTERFACE, fsg_string_interface}, + {} +}; + +static struct usb_gadget_strings fsg_stringtab = { + .language = 0x0409, /* en-us */ + .strings = fsg_strings, +}; + +/*-------------------------------------------------------------------------*/ + +/* + * If the next two routines are called while the gadget is registered, + * the caller must own fsg->filesem for writing. + */ + +static int fsg_lun_open(struct fsg_lun *curlun, const char *filename) +{ + int ro; + int rc = -EINVAL; + loff_t size; + loff_t num_sectors; + loff_t min_sectors; + + /* R/W if we can, R/O if we must */ + ro = curlun->initially_ro; + + ums_info->get_capacity(&(ums_info->ums_dev), &size); + if (size < 0) { + printf("unable to find file size: %s\n", filename); + rc = (int) size; + goto out; + } + num_sectors = size >> 9; /* File size in 512-byte blocks */ + min_sectors = 1; + if (num_sectors < min_sectors) { + printf("file too small: %s\n", filename); + rc = -ETOOSMALL; + goto out; + } + + curlun->ro = ro; + curlun->file_length = size; + curlun->num_sectors = num_sectors; + debug("open backing file: %s\n", filename); + rc = 0; + +out: + return rc; +} + +static void fsg_lun_close(struct fsg_lun *curlun) +{ +} + +/*-------------------------------------------------------------------------*/ + +/* + * Sync the file data, don't bother with the metadata. + * This code was copied from fs/buffer.c:sys_fdatasync(). + */ +static int fsg_lun_fsync_sub(struct fsg_lun *curlun) +{ + return 0; +} + +static void store_cdrom_address(u8 *dest, int msf, u32 addr) +{ + if (msf) { + /* Convert to Minutes-Seconds-Frames */ + addr >>= 2; /* Convert to 2048-byte frames */ + addr += 2*75; /* Lead-in occupies 2 seconds */ + dest[3] = addr % 75; /* Frames */ + addr /= 75; + dest[2] = addr % 60; /* Seconds */ + addr /= 60; + dest[1] = addr; /* Minutes */ + dest[0] = 0; /* Reserved */ + } else { + /* Absolute sector */ + put_unaligned_be32(addr, dest); + } +} + +/*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 6c94794929..9a6f982080 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -54,6 +54,7 @@ COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o COBJS-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o +COBJS-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o COBJS-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 3ca4c5c331..0c797aa042 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -42,11 +42,15 @@ DECLARE_GLOBAL_DATA_PTR; */ struct exynos_ehci { struct exynos_usb_phy *usb; - unsigned int *hcd; + struct ehci_hccr *hcd; }; +static struct exynos_ehci exynos; + +#ifdef CONFIG_OF_CONTROL static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos) { + fdt_addr_t addr; unsigned int node; int depth; @@ -59,12 +63,14 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos) /* * Get the base address for EHCI controller from the device node */ - exynos->hcd = (unsigned int *)fdtdec_get_addr(blob, node, "reg"); - if (exynos->hcd == NULL) { + addr = fdtdec_get_addr(blob, node, "reg"); + if (addr == FDT_ADDR_T_NONE) { debug("Can't get the EHCI register address\n"); return -ENXIO; } + exynos->hcd = (struct ehci_hccr *)addr; + depth = 0; node = fdtdec_next_compatible_subnode(blob, node, COMPAT_SAMSUNG_EXYNOS_USB_PHY, &depth); @@ -85,6 +91,7 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos) return 0; } +#endif /* Setup the EHCI host controller. */ static void setup_usb_phy(struct exynos_usb_phy *usb) @@ -144,20 +151,21 @@ static void reset_usb_phy(struct exynos_usb_phy *usb) */ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { - struct exynos_ehci *exynos = NULL; + struct exynos_ehci *ctx = &exynos; - exynos = (struct exynos_ehci *) - kzalloc(sizeof(struct exynos_ehci), GFP_KERNEL); - if (!exynos) { - debug("failed to allocate exynos ehci context\n"); - return -ENOMEM; +#ifdef CONFIG_OF_CONTROL + if (exynos_usb_parse_dt(gd->fdt_blob, ctx)) { + debug("Unable to parse device tree for ehci-exynos\n"); + return -ENODEV; } +#else + ctx->usb = (struct exynos_usb_phy *)samsung_get_base_usb_phy(); + ctx->hcd = (struct ehci_hccr *)samsung_get_base_usb_ehci(); +#endif - exynos_usb_parse_dt(gd->fdt_blob, exynos); + setup_usb_phy(ctx->usb); - setup_usb_phy(exynos->usb); - - *hccr = (struct ehci_hccr *)(exynos->hcd); + *hccr = ctx->hcd; *hcor = (struct ehci_hcor *)((uint32_t) *hccr + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); @@ -165,8 +173,6 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) (uint32_t)*hccr, (uint32_t)*hcor, (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); - kfree(exynos); - return 0; } @@ -176,20 +182,9 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) */ int ehci_hcd_stop(int index) { - struct exynos_ehci *exynos = NULL; - - exynos = (struct exynos_ehci *) - kzalloc(sizeof(struct exynos_ehci), GFP_KERNEL); - if (!exynos) { - debug("failed to allocate exynos ehci context\n"); - return -ENOMEM; - } - - exynos_usb_parse_dt(gd->fdt_blob, exynos); - - reset_usb_phy(exynos->usb); + struct exynos_ehci *ctx = &exynos; - kfree(exynos); + reset_usb_phy(ctx->usb); return 0; } diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 7f98a6354a..c816878206 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -21,12 +21,14 @@ * MA 02111-1307 USA */ #include <common.h> +#include <errno.h> #include <asm/byteorder.h> #include <asm/unaligned.h> #include <usb.h> #include <asm/io.h> #include <malloc.h> #include <watchdog.h> +#include <linux/compiler.h> #include "ehci.h" @@ -39,7 +41,10 @@ static struct ehci_ctrl { struct ehci_hcor *hcor; int rootdev; uint16_t portreset; - struct QH qh_list __attribute__((aligned(USB_DMA_MINALIGN))); + struct QH qh_list __aligned(USB_DMA_MINALIGN); + struct QH periodic_queue __aligned(USB_DMA_MINALIGN); + uint32_t *periodic_list; + int ntds; } ehcic[CONFIG_USB_MAX_CONTROLLER_COUNT]; #define ALIGN_END_ADDR(type, ptr, size) \ @@ -858,6 +863,8 @@ int usb_lowlevel_init(int index, void **controller) uint32_t reg; uint32_t cmd; struct QH *qh_list; + struct QH *periodic; + int i; if (ehci_hcd_init(index, &ehcic[index].hccr, &ehcic[index].hcor)) return -1; @@ -870,6 +877,9 @@ int usb_lowlevel_init(int index, void **controller) if (ehci_hcd_init(index, &ehcic[index].hccr, &ehcic[index].hcor)) return -1; #endif + /* Set the high address word (aka segment) for 64-bit controller */ + if (ehci_readl(&ehcic[index].hccr->cr_hccparams) & 1) + ehci_writel(ehcic[index].hcor->or_ctrldssegment, 0); qh_list = &ehcic[index].qh_list; @@ -884,6 +894,40 @@ int usb_lowlevel_init(int index, void **controller) qh_list->qh_overlay.qt_token = cpu_to_hc32(QT_TOKEN_STATUS(QT_TOKEN_STATUS_HALTED)); + /* Set async. queue head pointer. */ + ehci_writel(&ehcic[index].hcor->or_asynclistaddr, (uint32_t)qh_list); + + /* + * Set up periodic list + * Step 1: Parent QH for all periodic transfers. + */ + periodic = &ehcic[index].periodic_queue; + memset(periodic, 0, sizeof(*periodic)); + periodic->qh_link = cpu_to_hc32(QH_LINK_TERMINATE); + periodic->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); + periodic->qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); + + /* + * Step 2: Setup frame-list: Every microframe, USB tries the same list. + * In particular, device specifications on polling frequency + * are disregarded. Keyboards seem to send NAK/NYet reliably + * when polled with an empty buffer. + * + * Split Transactions will be spread across microframes using + * S-mask and C-mask. + */ + ehcic[index].periodic_list = memalign(4096, 1024*4); + if (!ehcic[index].periodic_list) + return -ENOMEM; + for (i = 0; i < 1024; i++) { + ehcic[index].periodic_list[i] = (uint32_t)periodic + | QH_LINK_TYPE_QH; + } + + /* Set periodic list base address */ + ehci_writel(&ehcic[index].hcor->or_periodiclistbase, + (uint32_t)ehcic[index].periodic_list); + reg = ehci_readl(&ehcic[index].hccr->cr_hcsparams); descriptor.hub.bNbrPorts = HCS_N_PORTS(reg); debug("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts); @@ -953,10 +997,254 @@ submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, return ehci_submit_async(dev, pipe, buffer, length, setup); } +struct int_queue { + struct QH *first; + struct QH *current; + struct QH *last; + struct qTD *tds; +}; + +#define NEXT_QH(qh) (struct QH *)((qh)->qh_link & ~0x1f) + +static int +enable_periodic(struct ehci_ctrl *ctrl) +{ + uint32_t cmd; + struct ehci_hcor *hcor = ctrl->hcor; + int ret; + + cmd = ehci_readl(&hcor->or_usbcmd); + cmd |= CMD_PSE; + ehci_writel(&hcor->or_usbcmd, cmd); + + ret = handshake((uint32_t *)&hcor->or_usbsts, + STS_PSS, STS_PSS, 100 * 1000); + if (ret < 0) { + printf("EHCI failed: timeout when enabling periodic list\n"); + return -ETIMEDOUT; + } + udelay(1000); + return 0; +} + +static int +disable_periodic(struct ehci_ctrl *ctrl) +{ + uint32_t cmd; + struct ehci_hcor *hcor = ctrl->hcor; + int ret; + + cmd = ehci_readl(&hcor->or_usbcmd); + cmd &= ~CMD_PSE; + ehci_writel(&hcor->or_usbcmd, cmd); + + ret = handshake((uint32_t *)&hcor->or_usbsts, + STS_PSS, 0, 100 * 1000); + if (ret < 0) { + printf("EHCI failed: timeout when disabling periodic list\n"); + return -ETIMEDOUT; + } + return 0; +} + +static int periodic_schedules; + +struct int_queue * +create_int_queue(struct usb_device *dev, unsigned long pipe, int queuesize, + int elementsize, void *buffer) +{ + struct ehci_ctrl *ctrl = dev->controller; + struct int_queue *result = NULL; + int i; + + debug("Enter create_int_queue\n"); + if (usb_pipetype(pipe) != PIPE_INTERRUPT) { + debug("non-interrupt pipe (type=%lu)", usb_pipetype(pipe)); + return NULL; + } + + /* limit to 4 full pages worth of data - + * we can safely fit them in a single TD, + * no matter the alignment + */ + if (elementsize >= 16384) { + debug("too large elements for interrupt transfers\n"); + return NULL; + } + + result = malloc(sizeof(*result)); + if (!result) { + debug("ehci intr queue: out of memory\n"); + goto fail1; + } + result->first = memalign(32, sizeof(struct QH) * queuesize); + if (!result->first) { + debug("ehci intr queue: out of memory\n"); + goto fail2; + } + result->current = result->first; + result->last = result->first + queuesize - 1; + result->tds = memalign(32, sizeof(struct qTD) * queuesize); + if (!result->tds) { + debug("ehci intr queue: out of memory\n"); + goto fail3; + } + memset(result->first, 0, sizeof(struct QH) * queuesize); + memset(result->tds, 0, sizeof(struct qTD) * queuesize); + + for (i = 0; i < queuesize; i++) { + struct QH *qh = result->first + i; + struct qTD *td = result->tds + i; + void **buf = &qh->buffer; + + qh->qh_link = (uint32_t)(qh+1) | QH_LINK_TYPE_QH; + if (i == queuesize - 1) + qh->qh_link = QH_LINK_TERMINATE; + + qh->qh_overlay.qt_next = (uint32_t)td; + qh->qh_endpt1 = (0 << 28) | /* No NAK reload (ehci 4.9) */ + (usb_maxpacket(dev, pipe) << 16) | /* MPS */ + (1 << 14) | + QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) | + (usb_pipeendpoint(pipe) << 8) | /* Endpoint Number */ + (usb_pipedevice(pipe) << 0); + qh->qh_endpt2 = (1 << 30) | /* 1 Tx per mframe */ + (1 << 0); /* S-mask: microframe 0 */ + if (dev->speed == USB_SPEED_LOW || + dev->speed == USB_SPEED_FULL) { + debug("TT: port: %d, hub address: %d\n", + dev->portnr, dev->parent->devnum); + qh->qh_endpt2 |= (dev->portnr << 23) | + (dev->parent->devnum << 16) | + (0x1c << 8); /* C-mask: microframes 2-4 */ + } + + td->qt_next = QT_NEXT_TERMINATE; + td->qt_altnext = QT_NEXT_TERMINATE; + debug("communication direction is '%s'\n", + usb_pipein(pipe) ? "in" : "out"); + td->qt_token = (elementsize << 16) | + ((usb_pipein(pipe) ? 1 : 0) << 8) | /* IN/OUT token */ + 0x80; /* active */ + td->qt_buffer[0] = (uint32_t)buffer + i * elementsize; + td->qt_buffer[1] = (td->qt_buffer[0] + 0x1000) & ~0xfff; + td->qt_buffer[2] = (td->qt_buffer[0] + 0x2000) & ~0xfff; + td->qt_buffer[3] = (td->qt_buffer[0] + 0x3000) & ~0xfff; + td->qt_buffer[4] = (td->qt_buffer[0] + 0x4000) & ~0xfff; + + *buf = buffer + i * elementsize; + } + + if (disable_periodic(ctrl) < 0) { + debug("FATAL: periodic should never fail, but did"); + goto fail3; + } + + /* hook up to periodic list */ + struct QH *list = &ctrl->periodic_queue; + result->last->qh_link = list->qh_link; + list->qh_link = (uint32_t)result->first | QH_LINK_TYPE_QH; + + if (enable_periodic(ctrl) < 0) { + debug("FATAL: periodic should never fail, but did"); + goto fail3; + } + periodic_schedules++; + + debug("Exit create_int_queue\n"); + return result; +fail3: + if (result->tds) + free(result->tds); +fail2: + if (result->first) + free(result->first); + if (result) + free(result); +fail1: + return NULL; +} + +void *poll_int_queue(struct usb_device *dev, struct int_queue *queue) +{ + struct QH *cur = queue->current; + + /* depleted queue */ + if (cur == NULL) { + debug("Exit poll_int_queue with completed queue\n"); + return NULL; + } + /* still active */ + if (cur->qh_overlay.qt_token & 0x80) { + debug("Exit poll_int_queue with no completed intr transfer. " + "token is %x\n", cur->qh_overlay.qt_token); + return NULL; + } + if (!(cur->qh_link & QH_LINK_TERMINATE)) + queue->current++; + else + queue->current = NULL; + debug("Exit poll_int_queue with completed intr transfer. " + "token is %x at %p (first at %p)\n", cur->qh_overlay.qt_token, + &cur->qh_overlay.qt_token, queue->first); + return cur->buffer; +} + +/* Do not free buffers associated with QHs, they're owned by someone else */ +int +destroy_int_queue(struct usb_device *dev, struct int_queue *queue) +{ + struct ehci_ctrl *ctrl = dev->controller; + int result = -1; + unsigned long timeout; + + if (disable_periodic(ctrl) < 0) { + debug("FATAL: periodic should never fail, but did"); + goto out; + } + periodic_schedules--; + + struct QH *cur = &ctrl->periodic_queue; + timeout = get_timer(0) + 500; /* abort after 500ms */ + while (!(cur->qh_link & QH_LINK_TERMINATE)) { + debug("considering %p, with qh_link %x\n", cur, cur->qh_link); + if (NEXT_QH(cur) == queue->first) { + debug("found candidate. removing from chain\n"); + cur->qh_link = queue->last->qh_link; + result = 0; + break; + } + cur = NEXT_QH(cur); + if (get_timer(0) > timeout) { + printf("Timeout destroying interrupt endpoint queue\n"); + result = -1; + goto out; + } + } + + if (periodic_schedules > 0) { + result = enable_periodic(ctrl); + if (result < 0) + debug("FATAL: periodic should never fail, but did"); + } + +out: + free(queue->tds); + free(queue->first); + free(queue); + + return result; +} + int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int length, int interval) { + void *backbuffer; + struct int_queue *queue; + unsigned long timeout; + int result = 0, ret; + debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d", dev, pipe, buffer, length, interval); @@ -972,9 +1260,31 @@ submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, * not require more than a single qTD. */ if (length > usb_maxpacket(dev, pipe)) { - printf("%s: Interrupt transfers requiring several transactions " - "are not supported.\n", __func__); + printf("%s: Interrupt transfers requiring several " + "transactions are not supported.\n", __func__); return -1; } - return ehci_submit_async(dev, pipe, buffer, length, NULL); + + queue = create_int_queue(dev, pipe, 1, length, buffer); + + timeout = get_timer(0) + USB_TIMEOUT_MS(pipe); + while ((backbuffer = poll_int_queue(dev, queue)) == NULL) + if (get_timer(0) > timeout) { + printf("Timeout poll on interrupt endpoint\n"); + result = -ETIMEDOUT; + break; + } + + if (backbuffer != buffer) { + debug("got wrong buffer back (%x instead of %x)\n", + (uint32_t)backbuffer, (uint32_t)buffer); + return -EINVAL; + } + + ret = destroy_int_queue(dev, queue); + if (ret < 0) + return ret; + + /* everything worked out fine */ + return result; } diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 1b20e4185c..c1ae3d9080 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -21,7 +21,6 @@ #include <asm/io.h> #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> -#include <asm/arch/mx6x_pins.h> #include <asm/imx-common/iomux-v3.h> #include "ehci.h" diff --git a/drivers/usb/host/ehci-mxs.c b/drivers/usb/host/ehci-mxs.c index 5062af5559..f320d3eb5d 100644 --- a/drivers/usb/host/ehci-mxs.c +++ b/drivers/usb/host/ehci-mxs.c @@ -21,91 +21,107 @@ #include <common.h> #include <asm/io.h> -#include <asm/arch/regs-common.h> -#include <asm/arch/regs-base.h> -#include <asm/arch/regs-clkctrl-mx28.h> -#include <asm/arch/regs-usb.h> -#include <asm/arch/regs-usbphy.h> +#include <asm/arch/imx-regs.h> +#include <errno.h> #include "ehci.h" -#if (CONFIG_EHCI_MXS_PORT != 0) && (CONFIG_EHCI_MXS_PORT != 1) -#error "MXS EHCI: Invalid port selected!" -#endif - -#ifndef CONFIG_EHCI_MXS_PORT -#error "MXS EHCI: Please define correct port using CONFIG_EHCI_MXS_PORT!" -#endif +/* This DIGCTL register ungates clock to USB */ +#define HW_DIGCTL_CTRL 0x8001c000 +#define HW_DIGCTL_CTRL_USB0_CLKGATE (1 << 2) +#define HW_DIGCTL_CTRL_USB1_CLKGATE (1 << 16) -static struct ehci_mxs { - struct mxs_usb_regs *usb_regs; +struct ehci_mxs_port { + uint32_t usb_regs; struct mxs_usbphy_regs *phy_regs; -} ehci_mxs; -int mxs_ehci_get_port(struct ehci_mxs *mxs_usb, int port) + struct mxs_register_32 *pll; + uint32_t pll_en_bits; + uint32_t pll_dis_bits; + uint32_t gate_bits; +}; + +static const struct ehci_mxs_port mxs_port[] = { +#ifdef CONFIG_EHCI_MXS_PORT0 + { + MXS_USBCTRL0_BASE, + (struct mxs_usbphy_regs *)MXS_USBPHY0_BASE, + (struct mxs_register_32 *)(MXS_CLKCTRL_BASE + + offsetof(struct mxs_clkctrl_regs, + hw_clkctrl_pll0ctrl0_reg)), + CLKCTRL_PLL0CTRL0_EN_USB_CLKS | CLKCTRL_PLL0CTRL0_POWER, + CLKCTRL_PLL0CTRL0_EN_USB_CLKS, + HW_DIGCTL_CTRL_USB0_CLKGATE, + }, +#endif +#ifdef CONFIG_EHCI_MXS_PORT1 + { + MXS_USBCTRL1_BASE, + (struct mxs_usbphy_regs *)MXS_USBPHY1_BASE, + (struct mxs_register_32 *)(MXS_CLKCTRL_BASE + + offsetof(struct mxs_clkctrl_regs, + hw_clkctrl_pll1ctrl0_reg)), + CLKCTRL_PLL1CTRL0_EN_USB_CLKS | CLKCTRL_PLL1CTRL0_POWER, + CLKCTRL_PLL1CTRL0_EN_USB_CLKS, + HW_DIGCTL_CTRL_USB1_CLKGATE, + }, +#endif +}; + +static int ehci_mxs_toggle_clock(const struct ehci_mxs_port *port, int enable) { - uint32_t usb_base, phy_base; - switch (port) { - case 0: - usb_base = MXS_USBCTRL0_BASE; - phy_base = MXS_USBPHY0_BASE; - break; - case 1: - usb_base = MXS_USBCTRL1_BASE; - phy_base = MXS_USBPHY1_BASE; - break; - default: - printf("CONFIG_EHCI_MXS_PORT (port = %d)\n", port); - return -1; + struct mxs_register_32 *digctl_ctrl = + (struct mxs_register_32 *)HW_DIGCTL_CTRL; + int pll_offset, dig_offset; + + if (enable) { + pll_offset = offsetof(struct mxs_register_32, reg_set); + dig_offset = offsetof(struct mxs_register_32, reg_clr); + writel(port->gate_bits, (u32)&digctl_ctrl->reg + dig_offset); + writel(port->pll_en_bits, (u32)port->pll + pll_offset); + } else { + pll_offset = offsetof(struct mxs_register_32, reg_clr); + dig_offset = offsetof(struct mxs_register_32, reg_set); + writel(port->pll_dis_bits, (u32)port->pll + pll_offset); + writel(port->gate_bits, (u32)&digctl_ctrl->reg + dig_offset); } - mxs_usb->usb_regs = (struct mxs_usb_regs *)usb_base; - mxs_usb->phy_regs = (struct mxs_usbphy_regs *)phy_base; return 0; } -/* This DIGCTL register ungates clock to USB */ -#define HW_DIGCTL_CTRL 0x8001c000 -#define HW_DIGCTL_CTRL_USB0_CLKGATE (1 << 2) -#define HW_DIGCTL_CTRL_USB1_CLKGATE (1 << 16) - int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { int ret; uint32_t usb_base, cap_base; - struct mxs_register_32 *digctl_ctrl = - (struct mxs_register_32 *)HW_DIGCTL_CTRL; - struct mxs_clkctrl_regs *clkctrl_regs = - (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; + const struct ehci_mxs_port *port; - ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT); - if (ret) - return ret; + if ((index < 0) || (index >= ARRAY_SIZE(mxs_port))) { + printf("Invalid port index (index = %d)!\n", index); + return -EINVAL; + } + + port = &mxs_port[index]; /* Reset the PHY block */ - writel(USBPHY_CTRL_SFTRST, &ehci_mxs.phy_regs->hw_usbphy_ctrl_set); + writel(USBPHY_CTRL_SFTRST, &port->phy_regs->hw_usbphy_ctrl_set); udelay(10); writel(USBPHY_CTRL_SFTRST | USBPHY_CTRL_CLKGATE, - &ehci_mxs.phy_regs->hw_usbphy_ctrl_clr); + &port->phy_regs->hw_usbphy_ctrl_clr); /* Enable USB clock */ - writel(CLKCTRL_PLL0CTRL0_EN_USB_CLKS | CLKCTRL_PLL0CTRL0_POWER, - &clkctrl_regs->hw_clkctrl_pll0ctrl0_set); - writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS | CLKCTRL_PLL1CTRL0_POWER, - &clkctrl_regs->hw_clkctrl_pll1ctrl0_set); - - writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE, - &digctl_ctrl->reg_clr); + ret = ehci_mxs_toggle_clock(port, 1); + if (ret) + return ret; /* Start USB PHY */ - writel(0, &ehci_mxs.phy_regs->hw_usbphy_pwd); + writel(0, &port->phy_regs->hw_usbphy_pwd); /* Enable UTMI+ Level 2 and Level 3 compatibility */ writel(USBPHY_CTRL_ENUTMILEVEL3 | USBPHY_CTRL_ENUTMILEVEL2 | 1, - &ehci_mxs.phy_regs->hw_usbphy_ctrl_set); + &port->phy_regs->hw_usbphy_ctrl_set); - usb_base = ((uint32_t)ehci_mxs.usb_regs) + 0x100; + usb_base = port->usb_regs + 0x100; *hccr = (struct ehci_hccr *)usb_base; cap_base = ehci_readl(&(*hccr)->cr_capbase); @@ -118,19 +134,19 @@ int ehci_hcd_stop(int index) { int ret; uint32_t usb_base, cap_base, tmp; - struct mxs_register_32 *digctl_ctrl = - (struct mxs_register_32 *)HW_DIGCTL_CTRL; - struct mxs_clkctrl_regs *clkctrl_regs = - (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE; struct ehci_hccr *hccr; struct ehci_hcor *hcor; + const struct ehci_mxs_port *port; - ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT); - if (ret) - return ret; + if ((index < 0) || (index >= ARRAY_SIZE(mxs_port))) { + printf("Invalid port index (index = %d)!\n", index); + return -EINVAL; + } + + port = &mxs_port[index]; /* Stop the USB port */ - usb_base = ((uint32_t)ehci_mxs.usb_regs) + 0x100; + usb_base = port->usb_regs + 0x100; hccr = (struct ehci_hccr *)usb_base; cap_base = ehci_readl(&hccr->cr_capbase); hcor = (struct ehci_hcor *)(usb_base + HC_LENGTH(cap_base)); @@ -144,17 +160,10 @@ int ehci_hcd_stop(int index) USBPHY_PWD_RXPWD1PT1 | USBPHY_PWD_RXPWDENV | USBPHY_PWD_TXPWDV2I | USBPHY_PWD_TXPWDIBIAS | USBPHY_PWD_TXPWDFS; - writel(tmp, &ehci_mxs.phy_regs->hw_usbphy_pwd); + writel(tmp, &port->phy_regs->hw_usbphy_pwd); /* Disable USB clock */ - writel(CLKCTRL_PLL0CTRL0_EN_USB_CLKS, - &clkctrl_regs->hw_clkctrl_pll0ctrl0_clr); - writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS, - &clkctrl_regs->hw_clkctrl_pll1ctrl0_clr); + ret = ehci_mxs_toggle_clock(port, 0); - /* Gate off the USB clock */ - writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE, - &digctl_ctrl->reg_set); - - return 0; + return ret; } diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 29af02dc5b..90d7a6feb5 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -19,6 +19,7 @@ */ #include <common.h> +#include <errno.h> #include <pci.h> #include <usb.h> @@ -32,31 +33,76 @@ static struct pci_device_id ehci_pci_ids[] = { {0x12D8, 0x400F}, /* Pericom */ {0, 0} }; +#else +static pci_dev_t ehci_find_class(int index) +{ + int bus; + int devnum; + pci_dev_t bdf; + uint32_t class; + + for (bus = 0; bus <= pci_last_busno(); bus++) { + for (devnum = 0; devnum < PCI_MAX_PCI_DEVICES-1; devnum++) { + pci_read_config_dword(PCI_BDF(bus, devnum, 0), + PCI_CLASS_REVISION, &class); + if (class >> 16 == 0xffff) + continue; + + for (bdf = PCI_BDF(bus, devnum, 0); + bdf <= PCI_BDF(bus, devnum, + PCI_MAX_PCI_FUNCTIONS - 1); + bdf += PCI_BDF(0, 0, 1)) { + pci_read_config_dword(bdf, PCI_CLASS_REVISION, + &class); + if ((class >> 8 == PCI_CLASS_SERIAL_USB_EHCI) + && !index--) + return bdf; + } + } + } + + return -ENODEV; +} #endif /* * Create the appropriate control structures to manage * a new EHCI host controller. */ -int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +int ehci_hcd_init(int index, struct ehci_hccr **ret_hccr, + struct ehci_hcor **ret_hcor) { pci_dev_t pdev; + uint32_t cmd; + struct ehci_hccr *hccr; + struct ehci_hcor *hcor; +#ifdef CONFIG_PCI_EHCI_DEVICE pdev = pci_find_devices(ehci_pci_ids, CONFIG_PCI_EHCI_DEVICE); - if (pdev == -1) { +#else + pdev = ehci_find_class(index); +#endif + if (pdev < 0) { printf("EHCI host controller not found\n"); return -1; } - *hccr = (struct ehci_hccr *)pci_map_bar(pdev, + hccr = (struct ehci_hccr *)pci_map_bar(pdev, PCI_BASE_ADDRESS_0, PCI_REGION_MEM); - *hcor = (struct ehci_hcor *)((uint32_t) *hccr + - HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); + hcor = (struct ehci_hcor *)((uint32_t) hccr + + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); debug("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n", - (uint32_t)*hccr, (uint32_t)*hcor, - (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); + (uint32_t)hccr, (uint32_t)hcor, + (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); + + *ret_hccr = hccr; + *ret_hcor = hcor; + /* enable busmaster */ + pci_read_config_dword(pdev, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MASTER; + pci_write_config_dword(pdev, PCI_COMMAND, cmd); return 0; } diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c new file mode 100644 index 0000000000..f99bd1f693 --- /dev/null +++ b/drivers/usb/host/ehci-spear.c @@ -0,0 +1,59 @@ +/* + * (C) Copyright 2010 + * Armando Visconti, ST Micoelectronics, <armando.visconti@st.com>. + * + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <usb.h> +#include "ehci.h" +#include <asm/arch/hardware.h> + + +/* + * Create the appropriate control structures to manage + * a new EHCI host controller. + */ +int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + *hccr = (struct ehci_hccr *)(CONFIG_SYS_UHC0_EHCI_BASE + 0x100); + *hcor = (struct ehci_hcor *)((uint32_t)*hccr + + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); + + debug("SPEAr-ehci: init hccr %x and hcor %x hc_length %d\n", + (uint32_t)*hccr, (uint32_t)*hcor, + (uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); + + return 0; +} + +/* + * Destroy the appropriate control structures corresponding + * the the EHCI host controller. + */ +int ehci_hcd_stop(int index) +{ + return 0; +} diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index a1c43f8331..554145a250 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -1,5 +1,7 @@ /* + * Copyright (c) 2011 The Chromium OS Authors. * Copyright (c) 2009-2012 NVIDIA Corporation + * Copyright (c) 2013 Lucas Stach * * See file CREDITS for list of people who contributed to this * project. @@ -21,12 +23,128 @@ */ #include <common.h> +#include <asm/errno.h> +#include <asm/io.h> +#include <asm-generic/gpio.h> +#include <asm/arch/clock.h> +#include <asm/arch-tegra/usb.h> #include <usb.h> +#include <usb/ulpi.h> +#include <libfdt.h> +#include <fdtdec.h> #include "ehci.h" -#include <asm/errno.h> -#include <asm/arch/usb.h> +#ifdef CONFIG_USB_ULPI + #ifndef CONFIG_USB_ULPI_VIEWPORT + #error "To use CONFIG_USB_ULPI on Tegra Boards you have to also \ + define CONFIG_USB_ULPI_VIEWPORT" + #endif +#endif + +enum { + USB_PORTS_MAX = 3, /* Maximum ports we allow */ +}; + +/* Parameters we need for USB */ +enum { + PARAM_DIVN, /* PLL FEEDBACK DIVIDer */ + PARAM_DIVM, /* PLL INPUT DIVIDER */ + PARAM_DIVP, /* POST DIVIDER (2^N) */ + PARAM_CPCON, /* BASE PLLC CHARGE Pump setup ctrl */ + PARAM_LFCON, /* BASE PLLC LOOP FILter setup ctrl */ + PARAM_ENABLE_DELAY_COUNT, /* PLL-U Enable Delay Count */ + PARAM_STABLE_COUNT, /* PLL-U STABLE count */ + PARAM_ACTIVE_DELAY_COUNT, /* PLL-U Active delay count */ + PARAM_XTAL_FREQ_COUNT, /* PLL-U XTAL frequency count */ + PARAM_DEBOUNCE_A_TIME, /* 10MS DELAY for BIAS_DEBOUNCE_A */ + PARAM_BIAS_TIME, /* 20US DELAY AFter bias cell op */ + + PARAM_COUNT +}; + +/* Possible port types (dual role mode) */ +enum dr_mode { + DR_MODE_NONE = 0, + DR_MODE_HOST, /* supports host operation */ + DR_MODE_DEVICE, /* supports device operation */ + DR_MODE_OTG, /* supports both */ +}; + +/* Information about a USB port */ +struct fdt_usb { + struct usb_ctlr *reg; /* address of registers in physical memory */ + unsigned utmi:1; /* 1 if port has external tranceiver, else 0 */ + unsigned ulpi:1; /* 1 if port has external ULPI transceiver */ + unsigned enabled:1; /* 1 to enable, 0 to disable */ + unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */ + unsigned initialized:1; /* has this port already been initialized? */ + enum dr_mode dr_mode; /* dual role mode */ + enum periph_id periph_id;/* peripheral id */ + struct fdt_gpio_state vbus_gpio; /* GPIO for vbus enable */ + struct fdt_gpio_state phy_reset_gpio; /* GPIO to reset ULPI phy */ +}; + +static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */ +static unsigned port_count; /* Number of available ports */ + +/* + * This table has USB timing parameters for each Oscillator frequency we + * support. There are four sets of values: + * + * 1. PLLU configuration information (reference clock is osc/clk_m and + * PLLU-FOs are fixed at 12MHz/60MHz/480MHz). + * + * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz + * ---------------------------------------------------------------------- + * DIVN 960 (0x3c0) 200 (0c8) 960 (3c0h) 960 (3c0) + * DIVM 13 (0d) 4 (04) 12 (0c) 26 (1a) + * Filter frequency (MHz) 1 4.8 6 2 + * CPCON 1100b 0011b 1100b 1100b + * LFCON0 0 0 0 0 + * + * 2. PLL CONFIGURATION & PARAMETERS for different clock generators: + * + * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz + * --------------------------------------------------------------------------- + * PLLU_ENABLE_DLY_COUNT 02 (0x02) 03 (03) 02 (02) 04 (04) + * PLLU_STABLE_COUNT 51 (33) 75 (4B) 47 (2F) 102 (66) + * PLL_ACTIVE_DLY_COUNT 05 (05) 06 (06) 04 (04) 09 (09) + * XTAL_FREQ_COUNT 127 (7F) 187 (BB) 118 (76) 254 (FE) + * + * 3. Debounce values IdDig, Avalid, Bvalid, VbusValid, VbusWakeUp, and + * SessEnd. Each of these signals have their own debouncer and for each of + * those one out of two debouncing times can be chosen (BIAS_DEBOUNCE_A or + * BIAS_DEBOUNCE_B). + * + * The values of DEBOUNCE_A and DEBOUNCE_B are calculated as follows: + * 0xffff -> No debouncing at all + * <n> ms = <n> *1000 / (1/19.2MHz) / 4 + * + * So to program a 1 ms debounce for BIAS_DEBOUNCE_A, we have: + * BIAS_DEBOUNCE_A[15:0] = 1000 * 19.2 / 4 = 4800 = 0x12c0 + * + * We need to use only DebounceA for BOOTROM. We don't need the DebounceB + * values, so we can keep those to default. + * + * 4. The 20 microsecond delay after bias cell operation. + */ +static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = { + /* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */ + { 0x3C0, 0x0D, 0x00, 0xC, 0, 0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 }, + { 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 }, + { 0x3C0, 0x0C, 0x00, 0xC, 0, 0x02, 0x2F, 0x04, 0x76, 0x7530, 5 }, + { 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 } +}; + +/* UTMIP Idle Wait Delay */ +static const u8 utmip_idle_wait_delay = 17; + +/* UTMIP Elastic limit */ +static const u8 utmip_elastic_limit = 16; + +/* UTMIP High Speed Sync Start Delay */ +static const u8 utmip_hs_sync_start_delay = 9; /* * A known hardware issue where Connect Status Change bit of PORTSC register @@ -45,32 +163,428 @@ void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg) *reg |= EHCI_PS_CSC; } -/* - * Create the appropriate control structures to manage - * a new EHCI host controller. - */ -int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +/* Put the port into host mode */ +static void set_host_mode(struct fdt_usb *config) +{ + /* + * If we are an OTG port, check if remote host is driving VBus and + * bail out in this case. + */ + if (config->dr_mode == DR_MODE_OTG && + (readl(&config->reg->phy_vbus_sensors) & VBUS_VLD_STS)) + return; + + /* + * If not driving, we set the GPIO to enable VBUS. We assume + * that the pinmux is set up correctly for this. + */ + if (fdt_gpio_isvalid(&config->vbus_gpio)) { + fdtdec_setup_gpio(&config->vbus_gpio); + gpio_direction_output(config->vbus_gpio.gpio, + (config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ? + 0 : 1); + debug("set_host_mode: GPIO %d %s\n", config->vbus_gpio.gpio, + (config->vbus_gpio.flags & FDT_GPIO_ACTIVE_LOW) ? + "low" : "high"); + } +} + +void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr) +{ + /* Reset the USB controller with 2us delay */ + reset_periph(config->periph_id, 2); + + /* + * Set USB1_NO_LEGACY_MODE to 1, Registers are accessible under + * base address + */ + if (config->has_legacy_mode) + setbits_le32(&usbctlr->usb1_legacy_ctrl, USB1_NO_LEGACY_MODE); + + /* Put UTMIP1/3 in reset */ + setbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET); + + /* Enable the UTMIP PHY */ + if (config->utmi) + setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB); +} + +/* set up the UTMI USB controller with the parameters provided */ +static int init_utmi_usb_controller(struct fdt_usb *config) { - u32 our_hccr, our_hcor; + u32 val; + int loop_count; + const unsigned *timing; + struct usb_ctlr *usbctlr = config->reg; + + clock_enable(config->periph_id); + + /* Reset the usb controller */ + usbf_reset_controller(config, usbctlr); + + /* Stop crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN low */ + clrbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN); + + /* Follow the crystal clock disable by >100ns delay */ + udelay(1); + + /* + * To Use the A Session Valid for cable detection logic, VBUS_WAKEUP + * mux must be switched to actually use a_sess_vld threshold. + */ + if (fdt_gpio_isvalid(&config->vbus_gpio)) { + clrsetbits_le32(&usbctlr->usb1_legacy_ctrl, + VBUS_SENSE_CTL_MASK, + VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT); + } + + /* + * PLL Delay CONFIGURATION settings. The following parameters control + * the bring up of the plls. + */ + timing = usb_pll[clock_get_osc_freq()]; + + val = readl(&usbctlr->utmip_misc_cfg1); + clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK, + timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT); + clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK, + timing[PARAM_ACTIVE_DELAY_COUNT] << + UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT); + writel(val, &usbctlr->utmip_misc_cfg1); + + /* Set PLL enable delay count and crystal frequency count */ + val = readl(&usbctlr->utmip_pll_cfg1); + clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK, + timing[PARAM_ENABLE_DELAY_COUNT] << + UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT); + clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK, + timing[PARAM_XTAL_FREQ_COUNT] << + UTMIP_XTAL_FREQ_COUNT_SHIFT); + writel(val, &usbctlr->utmip_pll_cfg1); + + /* Setting the tracking length time */ + clrsetbits_le32(&usbctlr->utmip_bias_cfg1, + UTMIP_BIAS_PDTRK_COUNT_MASK, + timing[PARAM_BIAS_TIME] << UTMIP_BIAS_PDTRK_COUNT_SHIFT); + + /* Program debounce time for VBUS to become valid */ + clrsetbits_le32(&usbctlr->utmip_debounce_cfg0, + UTMIP_DEBOUNCE_CFG0_MASK, + timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT); + + setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J); + + /* Disable battery charge enabling bit */ + setbits_le32(&usbctlr->utmip_bat_chrg_cfg0, UTMIP_PD_CHRG); + + clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_XCVR_LSBIAS_SE); + setbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL); /* - * Select the first port, as we don't have a way of selecting others - * yet + * Configure the UTMIP_IDLE_WAIT and UTMIP_ELASTIC_LIMIT + * Setting these fields, together with default values of the + * other fields, results in programming the registers below as + * follows: + * UTMIP_HSRX_CFG0 = 0x9168c000 + * UTMIP_HSRX_CFG1 = 0x13 */ - if (tegrausb_start_port(index, &our_hccr, &our_hcor)) + + /* Set PLL enable delay count and Crystal frequency count */ + val = readl(&usbctlr->utmip_hsrx_cfg0); + clrsetbits_le32(&val, UTMIP_IDLE_WAIT_MASK, + utmip_idle_wait_delay << UTMIP_IDLE_WAIT_SHIFT); + clrsetbits_le32(&val, UTMIP_ELASTIC_LIMIT_MASK, + utmip_elastic_limit << UTMIP_ELASTIC_LIMIT_SHIFT); + writel(val, &usbctlr->utmip_hsrx_cfg0); + + /* Configure the UTMIP_HS_SYNC_START_DLY */ + clrsetbits_le32(&usbctlr->utmip_hsrx_cfg1, + UTMIP_HS_SYNC_START_DLY_MASK, + utmip_hs_sync_start_delay << UTMIP_HS_SYNC_START_DLY_SHIFT); + + /* Preceed the crystal clock disable by >100ns delay. */ + udelay(1); + + /* Resuscitate crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN */ + setbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN); + + /* Finished the per-controller init. */ + + /* De-assert UTMIP_RESET to bring out of reset. */ + clrbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET); + + /* Wait for the phy clock to become valid in 100 ms */ + for (loop_count = 100000; loop_count != 0; loop_count--) { + if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID) + break; + udelay(1); + } + if (!loop_count) + return -1; + + /* Disable ICUSB FS/LS transceiver */ + clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1); + + /* Select UTMI parallel interface */ + clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, + PTS_UTMI << PTS_SHIFT); + clrbits_le32(&usbctlr->port_sc1, STS); + + /* Deassert power down state */ + clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN | + UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN); + clrbits_le32(&usbctlr->utmip_xcvr_cfg1, UTMIP_FORCE_PDDISC_POWERDOWN | + UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN); + + return 0; +} + +#ifdef CONFIG_USB_ULPI +/* if board file does not set a ULPI reference frequency we default to 24MHz */ +#ifndef CONFIG_ULPI_REF_CLK +#define CONFIG_ULPI_REF_CLK 24000000 +#endif + +/* set up the ULPI USB controller with the parameters provided */ +static int init_ulpi_usb_controller(struct fdt_usb *config) +{ + u32 val; + int loop_count; + struct ulpi_viewport ulpi_vp; + struct usb_ctlr *usbctlr = config->reg; + + /* set up ULPI reference clock on pllp_out4 */ + clock_enable(PERIPH_ID_DEV2_OUT); + clock_set_pllout(CLOCK_ID_PERIPH, PLL_OUT4, CONFIG_ULPI_REF_CLK); + + /* reset ULPI phy */ + if (fdt_gpio_isvalid(&config->phy_reset_gpio)) { + fdtdec_setup_gpio(&config->phy_reset_gpio); + gpio_direction_output(config->phy_reset_gpio.gpio, 0); + mdelay(5); + gpio_set_value(config->phy_reset_gpio.gpio, 1); + } + + /* Reset the usb controller */ + clock_enable(config->periph_id); + usbf_reset_controller(config, usbctlr); + + /* enable pinmux bypass */ + setbits_le32(&usbctlr->ulpi_timing_ctrl_0, + ULPI_CLKOUT_PINMUX_BYP | ULPI_OUTPUT_PINMUX_BYP); + + /* Select ULPI parallel interface */ + clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK, PTS_ULPI << PTS_SHIFT); + + /* enable ULPI transceiver */ + setbits_le32(&usbctlr->susp_ctrl, ULPI_PHY_ENB); + + /* configure ULPI transceiver timings */ + val = 0; + writel(val, &usbctlr->ulpi_timing_ctrl_1); + + val |= ULPI_DATA_TRIMMER_SEL(4); + val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); + val |= ULPI_DIR_TRIMMER_SEL(4); + writel(val, &usbctlr->ulpi_timing_ctrl_1); + udelay(10); + + val |= ULPI_DATA_TRIMMER_LOAD; + val |= ULPI_STPDIRNXT_TRIMMER_LOAD; + val |= ULPI_DIR_TRIMMER_LOAD; + writel(val, &usbctlr->ulpi_timing_ctrl_1); + + /* set up phy for host operation with external vbus supply */ + ulpi_vp.port_num = 0; + ulpi_vp.viewport_addr = (u32)&usbctlr->ulpi_viewport; + + if (ulpi_init(&ulpi_vp)) { + printf("Tegra ULPI viewport init failed\n"); + return -1; + } + + ulpi_set_vbus(&ulpi_vp, 1, 1); + ulpi_set_vbus_indicator(&ulpi_vp, 1, 1, 0); + + /* enable wakeup events */ + setbits_le32(&usbctlr->port_sc1, WKCN | WKDS | WKOC); + + /* Enable and wait for the phy clock to become valid in 100 ms */ + setbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR); + for (loop_count = 100000; loop_count != 0; loop_count--) { + if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID) + break; + udelay(1); + } + if (!loop_count) + return -1; + clrbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR); + + return 0; +} +#else +static int init_ulpi_usb_controller(struct fdt_usb *config) +{ + printf("No code to set up ULPI controller, please enable" + "CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT"); + return -1; +} +#endif + +static void config_clock(const u32 timing[]) +{ + clock_start_pll(CLOCK_ID_USB, + timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP], + timing[PARAM_CPCON], timing[PARAM_LFCON]); +} + +int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config) +{ + const char *phy, *mode; + + config->reg = (struct usb_ctlr *)fdtdec_get_addr(blob, node, "reg"); + mode = fdt_getprop(blob, node, "dr_mode", NULL); + if (mode) { + if (0 == strcmp(mode, "host")) + config->dr_mode = DR_MODE_HOST; + else if (0 == strcmp(mode, "peripheral")) + config->dr_mode = DR_MODE_DEVICE; + else if (0 == strcmp(mode, "otg")) + config->dr_mode = DR_MODE_OTG; + else { + debug("%s: Cannot decode dr_mode '%s'\n", __func__, + mode); + return -FDT_ERR_NOTFOUND; + } + } else { + config->dr_mode = DR_MODE_HOST; + } + + phy = fdt_getprop(blob, node, "phy_type", NULL); + config->utmi = phy && 0 == strcmp("utmi", phy); + config->ulpi = phy && 0 == strcmp("ulpi", phy); + config->enabled = fdtdec_get_is_enabled(blob, node); + config->has_legacy_mode = fdtdec_get_bool(blob, node, + "nvidia,has-legacy-mode"); + config->periph_id = clock_decode_periph_id(blob, node); + if (config->periph_id == PERIPH_ID_NONE) { + debug("%s: Missing/invalid peripheral ID\n", __func__); + return -FDT_ERR_NOTFOUND; + } + fdtdec_decode_gpio(blob, node, "nvidia,vbus-gpio", &config->vbus_gpio); + fdtdec_decode_gpio(blob, node, "nvidia,phy-reset-gpio", + &config->phy_reset_gpio); + debug("enabled=%d, legacy_mode=%d, utmi=%d, ulpi=%d, periph_id=%d, " + "vbus=%d, phy_reset=%d, dr_mode=%d\n", + config->enabled, config->has_legacy_mode, config->utmi, + config->ulpi, config->periph_id, config->vbus_gpio.gpio, + config->phy_reset_gpio.gpio, config->dr_mode); + + return 0; +} + +int board_usb_init(const void *blob) +{ + struct fdt_usb config; + enum clock_osc_freq freq; + int node_list[USB_PORTS_MAX]; + int node, count, i; + + /* Set up the USB clocks correctly based on our oscillator frequency */ + freq = clock_get_osc_freq(); + config_clock(usb_pll[freq]); + + /* count may return <0 on error */ + count = fdtdec_find_aliases_for_id(blob, "usb", + COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX); + for (i = 0; i < count; i++) { + if (port_count == USB_PORTS_MAX) { + printf("tegrausb: Cannot register more than %d ports\n", + USB_PORTS_MAX); + return -1; + } + + debug("USB %d: ", i); + node = node_list[i]; + if (!node) + continue; + if (fdt_decode_usb(blob, node, &config)) { + debug("Cannot decode USB node %s\n", + fdt_get_name(blob, node, NULL)); + return -1; + } + config.initialized = 0; + + /* add new USB port to the list of available ports */ + port[port_count++] = config; + } + + return 0; +} + +/** + * Start up the given port number (ports are numbered from 0 on each board). + * This returns values for the appropriate hccr and hcor addresses to use for + * USB EHCI operations. + * + * @param index port number to start + * @param hccr returns start address of EHCI HCCR registers + * @param hcor returns start address of EHCI HCOR registers + * @return 0 if ok, -1 on error (generally invalid port number) + */ +int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + struct fdt_usb *config; + struct usb_ctlr *usbctlr; + + if (index >= port_count) return -1; - *hccr = (struct ehci_hccr *)our_hccr; - *hcor = (struct ehci_hcor *)our_hcor; + config = &port[index]; + + /* skip init, if the port is already initialized */ + if (config->initialized) + goto success; + + if (config->utmi && init_utmi_usb_controller(config)) { + printf("tegrausb: Cannot init port %d\n", index); + return -1; + } + + if (config->ulpi && init_ulpi_usb_controller(config)) { + printf("tegrausb: Cannot init port %d\n", index); + return -1; + } + set_host_mode(config); + + config->initialized = 1; + +success: + usbctlr = config->reg; + *hccr = (struct ehci_hccr *)&usbctlr->cap_length; + *hcor = (struct ehci_hcor *)&usbctlr->usb_cmd; return 0; } /* - * Destroy the appropriate control structures corresponding - * the the EHCI host controller. + * Bring down the specified USB controller */ int ehci_hcd_stop(int index) { - return tegrausb_stop_port(index); + struct usb_ctlr *usbctlr; + + usbctlr = port[index].reg; + + /* Stop controller */ + writel(0, &usbctlr->usb_cmd); + udelay(1000); + + /* Initiate controller reset */ + writel(2, &usbctlr->usb_cmd); + udelay(1000); + + port[index].initialized = 0; + + return 0; } diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 1e3cd793b6..d090f0a53e 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -69,6 +69,7 @@ struct ehci_hcor { #define CMD_RUN (1 << 0) /* start/stop HC */ uint32_t or_usbsts; #define STS_ASS (1 << 15) +#define STS_PSS (1 << 14) #define STS_HALT (1 << 12) uint32_t or_usbintr; #define INTR_UE (1 << 0) /* USB interrupt enable */ @@ -245,7 +246,10 @@ struct QH { * Add dummy fill value to make the size of this struct * aligned to 32 bytes */ - uint8_t fill[16]; + union { + uint32_t fill[4]; + void *buffer; + }; }; /* Low level init functions */ diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 170a358b52..e8cecca55a 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -40,6 +40,7 @@ COBJS-$(CONFIG_S6E63D6) += s6e63d6.o COBJS-$(CONFIG_LD9040) += ld9040.o COBJS-$(CONFIG_SED156X) += sed156x.o COBJS-$(CONFIG_VIDEO_AMBA) += amba.o +COBJS-$(CONFIG_VIDEO_BCM2835) += bcm2835.o COBJS-$(CONFIG_VIDEO_COREBOOT) += coreboot_fb.o COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o COBJS-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o diff --git a/drivers/video/bcm2835.c b/drivers/video/bcm2835.c new file mode 100644 index 0000000000..1e9a84ac1f --- /dev/null +++ b/drivers/video/bcm2835.c @@ -0,0 +1,127 @@ +/* + * (C) Copyright 2012 Stephen Warren + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <lcd.h> +#include <asm/arch/mbox.h> +#include <asm/global_data.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Global variables that lcd.c expects to exist */ +int lcd_line_length; +int lcd_color_fg; +int lcd_color_bg; +void *lcd_base; +void *lcd_console_address; +short console_col; +short console_row; +vidinfo_t panel_info; +char lcd_cursor_enabled; +ushort lcd_cursor_width; +ushort lcd_cursor_height; + +struct msg_query { + struct bcm2835_mbox_hdr hdr; + struct bcm2835_mbox_tag_physical_w_h physical_w_h; + u32 end_tag; +}; + +struct msg_setup { + struct bcm2835_mbox_hdr hdr; + struct bcm2835_mbox_tag_physical_w_h physical_w_h; + struct bcm2835_mbox_tag_virtual_w_h virtual_w_h; + struct bcm2835_mbox_tag_depth depth; + struct bcm2835_mbox_tag_pixel_order pixel_order; + struct bcm2835_mbox_tag_alpha_mode alpha_mode; + struct bcm2835_mbox_tag_virtual_offset virtual_offset; + struct bcm2835_mbox_tag_overscan overscan; + struct bcm2835_mbox_tag_allocate_buffer allocate_buffer; + u32 end_tag; +}; + +void lcd_ctrl_init(void *lcdbase) +{ + ALLOC_ALIGN_BUFFER(struct msg_query, msg_query, 1, 16); + ALLOC_ALIGN_BUFFER(struct msg_setup, msg_setup, 1, 16); + int ret; + u32 w, h; + + debug("bcm2835: Query resolution...\n"); + + BCM2835_MBOX_INIT_HDR(msg_query); + BCM2835_MBOX_INIT_TAG_NO_REQ(&msg_query->physical_w_h, + GET_PHYSICAL_W_H); + ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_query->hdr); + if (ret) { + printf("bcm2835: Could not query display resolution\n"); + /* FIXME: How to disable the LCD to prevent errors? hang()? */ + return; + } + + w = msg_query->physical_w_h.body.resp.width; + h = msg_query->physical_w_h.body.resp.height; + + debug("bcm2835: Setting up display for %d x %d\n", w, h); + + BCM2835_MBOX_INIT_HDR(msg_setup); + BCM2835_MBOX_INIT_TAG(&msg_setup->physical_w_h, SET_PHYSICAL_W_H); + msg_setup->physical_w_h.body.req.width = w; + msg_setup->physical_w_h.body.req.height = h; + BCM2835_MBOX_INIT_TAG(&msg_setup->virtual_w_h, SET_VIRTUAL_W_H); + msg_setup->virtual_w_h.body.req.width = w; + msg_setup->virtual_w_h.body.req.height = h; + BCM2835_MBOX_INIT_TAG(&msg_setup->depth, SET_DEPTH); + msg_setup->depth.body.req.bpp = 16; + BCM2835_MBOX_INIT_TAG(&msg_setup->pixel_order, SET_PIXEL_ORDER); + msg_setup->pixel_order.body.req.order = BCM2835_MBOX_PIXEL_ORDER_BGR; + BCM2835_MBOX_INIT_TAG(&msg_setup->alpha_mode, SET_ALPHA_MODE); + msg_setup->alpha_mode.body.req.alpha = BCM2835_MBOX_ALPHA_MODE_IGNORED; + BCM2835_MBOX_INIT_TAG(&msg_setup->virtual_offset, SET_VIRTUAL_OFFSET); + msg_setup->virtual_offset.body.req.x = 0; + msg_setup->virtual_offset.body.req.y = 0; + BCM2835_MBOX_INIT_TAG(&msg_setup->overscan, SET_OVERSCAN); + msg_setup->overscan.body.req.top = 0; + msg_setup->overscan.body.req.bottom = 0; + msg_setup->overscan.body.req.left = 0; + msg_setup->overscan.body.req.right = 0; + BCM2835_MBOX_INIT_TAG(&msg_setup->allocate_buffer, ALLOCATE_BUFFER); + msg_setup->allocate_buffer.body.req.alignment = 0x100; + + ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg_setup->hdr); + if (ret) { + printf("bcm2835: Could not configure display\n"); + /* FIXME: How to disable the LCD to prevent errors? hang()? */ + return; + } + + w = msg_setup->physical_w_h.body.resp.width; + h = msg_setup->physical_w_h.body.resp.height; + + debug("bcm2835: Final resolution is %d x %d\n", w, h); + + panel_info.vl_col = w; + panel_info.vl_row = h; + panel_info.vl_bpix = LCD_COLOR16; + + gd->fb_base = msg_setup->allocate_buffer.body.resp.fb_address; + lcd_base = (void *)gd->fb_base; +} + +void lcd_enable(void) +{ +} diff --git a/drivers/video/omap3_dss.c b/drivers/video/omap3_dss.c index b1424bfd03..6efba122e7 100644 --- a/drivers/video/omap3_dss.c +++ b/drivers/video/omap3_dss.c @@ -121,7 +121,7 @@ void omap3_dss_panel_config(const struct panel_config *panel_cfg) if (!panel_cfg->frame_buffer) return; - writel(8 << GFX_FORMAT_SHIFT | GFX_ENABLE, &dispc->gfx_attributes); + writel(panel_cfg->gfx_format | GFX_ENABLE, &dispc->gfx_attributes); writel(1, &dispc->gfx_row_inc); writel(1, &dispc->gfx_pixel_inc); writel(panel_cfg->lcd_size, &dispc->gfx_size); diff --git a/dts/Makefile b/dts/Makefile index 922c78c1ca..6f36153634 100644 --- a/dts/Makefile +++ b/dts/Makefile @@ -38,7 +38,8 @@ Please define CONFIG_ARCH_DEVICE_TREE)) # We preprocess the device tree file provide a useful define DTS_CPPFLAGS := -x assembler-with-cpp \ -DARCH_CPU_DTS=\"$(SRCTREE)/arch/$(ARCH)/dts/$(CONFIG_ARCH_DEVICE_TREE).dtsi\" \ - -DBOARD_DTS=\"$(SRCTREE)/board/$(VENDOR)/$(BOARD)/dts/$(DEVICE_TREE).dts\" + -DBOARD_DTS=\"$(SRCTREE)/board/$(VENDOR)/$(BOARD)/dts/$(DEVICE_TREE).dts\" \ + -I$(SRCTREE)/board/$(VENDOR)/dts -I$(SRCTREE)/arch/$(ARCH)/dts all: $(obj).depend $(LIB) diff --git a/examples/standalone/stubs.c b/examples/standalone/stubs.c index 15e9afcacd..8fb17653b0 100644 --- a/examples/standalone/stubs.c +++ b/examples/standalone/stubs.c @@ -217,16 +217,15 @@ void __attribute__((unused)) dummy(void) #include <_exports.h> } -extern unsigned long __bss_start, _end; +#include <asm/sections.h> void app_startup(char * const *argv) { - unsigned char * cp = (unsigned char *) &__bss_start; + char *cp = __bss_start; /* Zero out BSS */ - while (cp < (unsigned char *)&_end) { + while (cp < _end) *cp++ = 0; - } #if defined(CONFIG_X86) /* x86 does not have a dedicated register for passing global_data */ diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile index bb801f9054..3bde82418e 100644 --- a/fs/ext4/Makefile +++ b/fs/ext4/Makefile @@ -31,7 +31,7 @@ LIB = $(obj)libext4fs.o AOBJS = COBJS-$(CONFIG_FS_EXT4) := ext4fs.o ext4_common.o dev.o -COBJS-$(CONFIG_EXT4_WRITE) += ext4_journal.o crc16.o +COBJS-$(CONFIG_EXT4_WRITE) += ext4_write.o ext4_journal.o crc16.o SRCS := $(AOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS-y)) diff --git a/fs/ext4/ext4_write.c b/fs/ext4/ext4_write.c new file mode 100644 index 0000000000..c4e399ccfa --- /dev/null +++ b/fs/ext4/ext4_write.c @@ -0,0 +1,996 @@ +/* + * (C) Copyright 2011 - 2012 Samsung Electronics + * EXT4 filesystem implementation in Uboot by + * Uma Shankar <uma.shankar@samsung.com> + * Manjunatha C Achar <a.manjunatha@samsung.com> + * + * ext4ls and ext4load : Based on ext2 ls and load support in Uboot. + * Ext4 read optimization taken from Open-Moko + * Qi bootloader + * + * (C) Copyright 2004 + * esd gmbh <www.esd-electronics.com> + * Reinhard Arlt <reinhard.arlt@esd-electronics.com> + * + * based on code from grub2 fs/ext2.c and fs/fshelp.c by + * GRUB -- GRand Unified Bootloader + * Copyright (C) 2003, 2004 Free Software Foundation, Inc. + * + * ext4write : Based on generic ext4 protocol. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <common.h> +#include <linux/stat.h> +#include <div64.h> +#include "ext4_common.h" + +static void ext4fs_update(void) +{ + short i; + ext4fs_update_journal(); + struct ext_filesystem *fs = get_fs(); + + /* update super block */ + put_ext4((uint64_t)(SUPERBLOCK_SIZE), + (struct ext2_sblock *)fs->sb, (uint32_t)SUPERBLOCK_SIZE); + + /* update block groups */ + for (i = 0; i < fs->no_blkgrp; i++) { + fs->bgd[i].bg_checksum = ext4fs_checksum_update(i); + put_ext4((uint64_t)(fs->bgd[i].block_id * fs->blksz), + fs->blk_bmaps[i], fs->blksz); + } + + /* update inode table groups */ + for (i = 0; i < fs->no_blkgrp; i++) { + put_ext4((uint64_t) (fs->bgd[i].inode_id * fs->blksz), + fs->inode_bmaps[i], fs->blksz); + } + + /* update the block group descriptor table */ + put_ext4((uint64_t)(fs->gdtable_blkno * fs->blksz), + (struct ext2_block_group *)fs->gdtable, + (fs->blksz * fs->no_blk_pergdt)); + + ext4fs_dump_metadata(); + + gindex = 0; + gd_index = 0; +} + +int ext4fs_get_bgdtable(void) +{ + int status; + int grp_desc_size; + struct ext_filesystem *fs = get_fs(); + grp_desc_size = sizeof(struct ext2_block_group); + fs->no_blk_pergdt = (fs->no_blkgrp * grp_desc_size) / fs->blksz; + if ((fs->no_blkgrp * grp_desc_size) % fs->blksz) + fs->no_blk_pergdt++; + + /* allocate memory for gdtable */ + fs->gdtable = zalloc(fs->blksz * fs->no_blk_pergdt); + if (!fs->gdtable) + return -ENOMEM; + /* read the group descriptor table */ + status = ext4fs_devread(fs->gdtable_blkno * fs->sect_perblk, 0, + fs->blksz * fs->no_blk_pergdt, fs->gdtable); + if (status == 0) + goto fail; + + if (ext4fs_log_gdt(fs->gdtable)) { + printf("Error in ext4fs_log_gdt\n"); + return -1; + } + + return 0; +fail: + free(fs->gdtable); + fs->gdtable = NULL; + + return -1; +} + +static void delete_single_indirect_block(struct ext2_inode *inode) +{ + struct ext2_block_group *bgd = NULL; + static int prev_bg_bmap_idx = -1; + long int blknr; + int remainder; + int bg_idx; + int status; + unsigned int blk_per_grp = ext4fs_root->sblock.blocks_per_group; + struct ext_filesystem *fs = get_fs(); + char *journal_buffer = zalloc(fs->blksz); + if (!journal_buffer) { + printf("No memory\n"); + return; + } + /* get block group descriptor table */ + bgd = (struct ext2_block_group *)fs->gdtable; + + /* deleting the single indirect block associated with inode */ + if (inode->b.blocks.indir_block != 0) { + debug("SIPB releasing %u\n", inode->b.blocks.indir_block); + blknr = inode->b.blocks.indir_block; + if (fs->blksz != 1024) { + bg_idx = blknr / blk_per_grp; + } else { + bg_idx = blknr / blk_per_grp; + remainder = blknr % blk_per_grp; + if (!remainder) + bg_idx--; + } + ext4fs_reset_block_bmap(blknr, fs->blk_bmaps[bg_idx], bg_idx); + bgd[bg_idx].free_blocks++; + fs->sb->free_blocks++; + /* journal backup */ + if (prev_bg_bmap_idx != bg_idx) { + status = + ext4fs_devread(bgd[bg_idx].block_id * + fs->sect_perblk, 0, fs->blksz, + journal_buffer); + if (status == 0) + goto fail; + if (ext4fs_log_journal + (journal_buffer, bgd[bg_idx].block_id)) + goto fail; + prev_bg_bmap_idx = bg_idx; + } + } +fail: + free(journal_buffer); +} + +static void delete_double_indirect_block(struct ext2_inode *inode) +{ + int i; + short status; + static int prev_bg_bmap_idx = -1; + long int blknr; + int remainder; + int bg_idx; + unsigned int blk_per_grp = ext4fs_root->sblock.blocks_per_group; + unsigned int *di_buffer = NULL; + unsigned int *DIB_start_addr = NULL; + struct ext2_block_group *bgd = NULL; + struct ext_filesystem *fs = get_fs(); + char *journal_buffer = zalloc(fs->blksz); + if (!journal_buffer) { + printf("No memory\n"); + return; + } + /* get the block group descriptor table */ + bgd = (struct ext2_block_group *)fs->gdtable; + + if (inode->b.blocks.double_indir_block != 0) { + di_buffer = zalloc(fs->blksz); + if (!di_buffer) { + printf("No memory\n"); + return; + } + DIB_start_addr = (unsigned int *)di_buffer; + blknr = inode->b.blocks.double_indir_block; + status = ext4fs_devread(blknr * fs->sect_perblk, 0, fs->blksz, + (char *)di_buffer); + for (i = 0; i < fs->blksz / sizeof(int); i++) { + if (*di_buffer == 0) + break; + + debug("DICB releasing %u\n", *di_buffer); + if (fs->blksz != 1024) { + bg_idx = (*di_buffer) / blk_per_grp; + } else { + bg_idx = (*di_buffer) / blk_per_grp; + remainder = (*di_buffer) % blk_per_grp; + if (!remainder) + bg_idx--; + } + ext4fs_reset_block_bmap(*di_buffer, + fs->blk_bmaps[bg_idx], bg_idx); + di_buffer++; + bgd[bg_idx].free_blocks++; + fs->sb->free_blocks++; + /* journal backup */ + if (prev_bg_bmap_idx != bg_idx) { + status = ext4fs_devread(bgd[bg_idx].block_id + * fs->sect_perblk, 0, + fs->blksz, + journal_buffer); + if (status == 0) + goto fail; + + if (ext4fs_log_journal(journal_buffer, + bgd[bg_idx].block_id)) + goto fail; + prev_bg_bmap_idx = bg_idx; + } + } + + /* removing the parent double indirect block */ + blknr = inode->b.blocks.double_indir_block; + if (fs->blksz != 1024) { + bg_idx = blknr / blk_per_grp; + } else { + bg_idx = blknr / blk_per_grp; + remainder = blknr % blk_per_grp; + if (!remainder) + bg_idx--; + } + ext4fs_reset_block_bmap(blknr, fs->blk_bmaps[bg_idx], bg_idx); + bgd[bg_idx].free_blocks++; + fs->sb->free_blocks++; + /* journal backup */ + if (prev_bg_bmap_idx != bg_idx) { + memset(journal_buffer, '\0', fs->blksz); + status = ext4fs_devread(bgd[bg_idx].block_id * + fs->sect_perblk, 0, fs->blksz, + journal_buffer); + if (status == 0) + goto fail; + + if (ext4fs_log_journal(journal_buffer, + bgd[bg_idx].block_id)) + goto fail; + prev_bg_bmap_idx = bg_idx; + } + debug("DIPB releasing %ld\n", blknr); + } +fail: + free(DIB_start_addr); + free(journal_buffer); +} + +static void delete_triple_indirect_block(struct ext2_inode *inode) +{ + int i, j; + short status; + static int prev_bg_bmap_idx = -1; + long int blknr; + int remainder; + int bg_idx; + unsigned int blk_per_grp = ext4fs_root->sblock.blocks_per_group; + unsigned int *tigp_buffer = NULL; + unsigned int *tib_start_addr = NULL; + unsigned int *tip_buffer = NULL; + unsigned int *tipb_start_addr = NULL; + struct ext2_block_group *bgd = NULL; + struct ext_filesystem *fs = get_fs(); + char *journal_buffer = zalloc(fs->blksz); + if (!journal_buffer) { + printf("No memory\n"); + return; + } + /* get block group descriptor table */ + bgd = (struct ext2_block_group *)fs->gdtable; + + if (inode->b.blocks.triple_indir_block != 0) { + tigp_buffer = zalloc(fs->blksz); + if (!tigp_buffer) { + printf("No memory\n"); + return; + } + tib_start_addr = (unsigned int *)tigp_buffer; + blknr = inode->b.blocks.triple_indir_block; + status = ext4fs_devread(blknr * fs->sect_perblk, 0, fs->blksz, + (char *)tigp_buffer); + for (i = 0; i < fs->blksz / sizeof(int); i++) { + if (*tigp_buffer == 0) + break; + debug("tigp buffer releasing %u\n", *tigp_buffer); + + tip_buffer = zalloc(fs->blksz); + if (!tip_buffer) + goto fail; + tipb_start_addr = (unsigned int *)tip_buffer; + status = ext4fs_devread((*tigp_buffer) * + fs->sect_perblk, 0, fs->blksz, + (char *)tip_buffer); + for (j = 0; j < fs->blksz / sizeof(int); j++) { + if (*tip_buffer == 0) + break; + if (fs->blksz != 1024) { + bg_idx = (*tip_buffer) / blk_per_grp; + } else { + bg_idx = (*tip_buffer) / blk_per_grp; + + remainder = (*tip_buffer) % blk_per_grp; + if (!remainder) + bg_idx--; + } + + ext4fs_reset_block_bmap(*tip_buffer, + fs->blk_bmaps[bg_idx], + bg_idx); + + tip_buffer++; + bgd[bg_idx].free_blocks++; + fs->sb->free_blocks++; + /* journal backup */ + if (prev_bg_bmap_idx != bg_idx) { + status = + ext4fs_devread( + bgd[bg_idx].block_id * + fs->sect_perblk, 0, + fs->blksz, + journal_buffer); + if (status == 0) + goto fail; + + if (ext4fs_log_journal(journal_buffer, + bgd[bg_idx]. + block_id)) + goto fail; + prev_bg_bmap_idx = bg_idx; + } + } + free(tipb_start_addr); + tipb_start_addr = NULL; + + /* + * removing the grand parent blocks + * which is connected to inode + */ + if (fs->blksz != 1024) { + bg_idx = (*tigp_buffer) / blk_per_grp; + } else { + bg_idx = (*tigp_buffer) / blk_per_grp; + + remainder = (*tigp_buffer) % blk_per_grp; + if (!remainder) + bg_idx--; + } + ext4fs_reset_block_bmap(*tigp_buffer, + fs->blk_bmaps[bg_idx], bg_idx); + + tigp_buffer++; + bgd[bg_idx].free_blocks++; + fs->sb->free_blocks++; + /* journal backup */ + if (prev_bg_bmap_idx != bg_idx) { + memset(journal_buffer, '\0', fs->blksz); + status = + ext4fs_devread(bgd[bg_idx].block_id * + fs->sect_perblk, 0, + fs->blksz, journal_buffer); + if (status == 0) + goto fail; + + if (ext4fs_log_journal(journal_buffer, + bgd[bg_idx].block_id)) + goto fail; + prev_bg_bmap_idx = bg_idx; + } + } + + /* removing the grand parent triple indirect block */ + blknr = inode->b.blocks.triple_indir_block; + if (fs->blksz != 1024) { + bg_idx = blknr / blk_per_grp; + } else { + bg_idx = blknr / blk_per_grp; + remainder = blknr % blk_per_grp; + if (!remainder) + bg_idx--; + } + ext4fs_reset_block_bmap(blknr, fs->blk_bmaps[bg_idx], bg_idx); + bgd[bg_idx].free_blocks++; + fs->sb->free_blocks++; + /* journal backup */ + if (prev_bg_bmap_idx != bg_idx) { + memset(journal_buffer, '\0', fs->blksz); + status = ext4fs_devread(bgd[bg_idx].block_id * + fs->sect_perblk, 0, fs->blksz, + journal_buffer); + if (status == 0) + goto fail; + + if (ext4fs_log_journal(journal_buffer, + bgd[bg_idx].block_id)) + goto fail; + prev_bg_bmap_idx = bg_idx; + } + debug("tigp buffer itself releasing %ld\n", blknr); + } +fail: + free(tib_start_addr); + free(tipb_start_addr); + free(journal_buffer); +} + +static int ext4fs_delete_file(int inodeno) +{ + struct ext2_inode inode; + short status; + int i; + int remainder; + long int blknr; + int bg_idx; + int ibmap_idx; + char *read_buffer = NULL; + char *start_block_address = NULL; + unsigned int no_blocks; + + static int prev_bg_bmap_idx = -1; + unsigned int inodes_per_block; + long int blkno; + unsigned int blkoff; + unsigned int blk_per_grp = ext4fs_root->sblock.blocks_per_group; + unsigned int inode_per_grp = ext4fs_root->sblock.inodes_per_group; + struct ext2_inode *inode_buffer = NULL; + struct ext2_block_group *bgd = NULL; + struct ext_filesystem *fs = get_fs(); + char *journal_buffer = zalloc(fs->blksz); + if (!journal_buffer) + return -ENOMEM; + /* get the block group descriptor table */ + bgd = (struct ext2_block_group *)fs->gdtable; + status = ext4fs_read_inode(ext4fs_root, inodeno, &inode); + if (status == 0) + goto fail; + + /* read the block no allocated to a file */ + no_blocks = inode.size / fs->blksz; + if (inode.size % fs->blksz) + no_blocks++; + + if (le32_to_cpu(inode.flags) & EXT4_EXTENTS_FL) { + struct ext2fs_node *node_inode = + zalloc(sizeof(struct ext2fs_node)); + if (!node_inode) + goto fail; + node_inode->data = ext4fs_root; + node_inode->ino = inodeno; + node_inode->inode_read = 0; + memcpy(&(node_inode->inode), &inode, sizeof(struct ext2_inode)); + + for (i = 0; i < no_blocks; i++) { + blknr = read_allocated_block(&(node_inode->inode), i); + if (fs->blksz != 1024) { + bg_idx = blknr / blk_per_grp; + } else { + bg_idx = blknr / blk_per_grp; + remainder = blknr % blk_per_grp; + if (!remainder) + bg_idx--; + } + ext4fs_reset_block_bmap(blknr, fs->blk_bmaps[bg_idx], + bg_idx); + debug("EXT4_EXTENTS Block releasing %ld: %d\n", + blknr, bg_idx); + + bgd[bg_idx].free_blocks++; + fs->sb->free_blocks++; + + /* journal backup */ + if (prev_bg_bmap_idx != bg_idx) { + status = + ext4fs_devread(bgd[bg_idx].block_id * + fs->sect_perblk, 0, + fs->blksz, journal_buffer); + if (status == 0) + goto fail; + if (ext4fs_log_journal(journal_buffer, + bgd[bg_idx].block_id)) + goto fail; + prev_bg_bmap_idx = bg_idx; + } + } + if (node_inode) { + free(node_inode); + node_inode = NULL; + } + } else { + + delete_single_indirect_block(&inode); + delete_double_indirect_block(&inode); + delete_triple_indirect_block(&inode); + + /* read the block no allocated to a file */ + no_blocks = inode.size / fs->blksz; + if (inode.size % fs->blksz) + no_blocks++; + for (i = 0; i < no_blocks; i++) { + blknr = read_allocated_block(&inode, i); + if (fs->blksz != 1024) { + bg_idx = blknr / blk_per_grp; + } else { + bg_idx = blknr / blk_per_grp; + remainder = blknr % blk_per_grp; + if (!remainder) + bg_idx--; + } + ext4fs_reset_block_bmap(blknr, fs->blk_bmaps[bg_idx], + bg_idx); + debug("ActualB releasing %ld: %d\n", blknr, bg_idx); + + bgd[bg_idx].free_blocks++; + fs->sb->free_blocks++; + /* journal backup */ + if (prev_bg_bmap_idx != bg_idx) { + memset(journal_buffer, '\0', fs->blksz); + status = ext4fs_devread(bgd[bg_idx].block_id + * fs->sect_perblk, + 0, fs->blksz, + journal_buffer); + if (status == 0) + goto fail; + if (ext4fs_log_journal(journal_buffer, + bgd[bg_idx].block_id)) + goto fail; + prev_bg_bmap_idx = bg_idx; + } + } + } + + /* from the inode no to blockno */ + inodes_per_block = fs->blksz / fs->inodesz; + ibmap_idx = inodeno / inode_per_grp; + + /* get the block no */ + inodeno--; + blkno = __le32_to_cpu(bgd[ibmap_idx].inode_table_id) + + (inodeno % __le32_to_cpu(inode_per_grp)) / inodes_per_block; + + /* get the offset of the inode */ + blkoff = ((inodeno) % inodes_per_block) * fs->inodesz; + + /* read the block no containing the inode */ + read_buffer = zalloc(fs->blksz); + if (!read_buffer) + goto fail; + start_block_address = read_buffer; + status = ext4fs_devread(blkno * fs->sect_perblk, + 0, fs->blksz, read_buffer); + if (status == 0) + goto fail; + + if (ext4fs_log_journal(read_buffer, blkno)) + goto fail; + + read_buffer = read_buffer + blkoff; + inode_buffer = (struct ext2_inode *)read_buffer; + memset(inode_buffer, '\0', sizeof(struct ext2_inode)); + + /* write the inode to original position in inode table */ + if (ext4fs_put_metadata(start_block_address, blkno)) + goto fail; + + /* update the respective inode bitmaps */ + inodeno++; + ext4fs_reset_inode_bmap(inodeno, fs->inode_bmaps[ibmap_idx], ibmap_idx); + bgd[ibmap_idx].free_inodes++; + fs->sb->free_inodes++; + /* journal backup */ + memset(journal_buffer, '\0', fs->blksz); + status = ext4fs_devread(bgd[ibmap_idx].inode_id * + fs->sect_perblk, 0, fs->blksz, journal_buffer); + if (status == 0) + goto fail; + if (ext4fs_log_journal(journal_buffer, bgd[ibmap_idx].inode_id)) + goto fail; + + ext4fs_update(); + ext4fs_deinit(); + + if (ext4fs_init() != 0) { + printf("error in File System init\n"); + goto fail; + } + + free(start_block_address); + free(journal_buffer); + + return 0; +fail: + free(start_block_address); + free(journal_buffer); + + return -1; +} + +int ext4fs_init(void) +{ + short status; + int i; + unsigned int real_free_blocks = 0; + struct ext_filesystem *fs = get_fs(); + + /* populate fs */ + fs->blksz = EXT2_BLOCK_SIZE(ext4fs_root); + fs->inodesz = INODE_SIZE_FILESYSTEM(ext4fs_root); + fs->sect_perblk = fs->blksz / SECTOR_SIZE; + + /* get the superblock */ + fs->sb = zalloc(SUPERBLOCK_SIZE); + if (!fs->sb) + return -ENOMEM; + if (!ext4fs_devread(SUPERBLOCK_SECTOR, 0, SUPERBLOCK_SIZE, + (char *)fs->sb)) + goto fail; + + /* init journal */ + if (ext4fs_init_journal()) + goto fail; + + /* get total no of blockgroups */ + fs->no_blkgrp = (uint32_t)ext4fs_div_roundup( + (ext4fs_root->sblock.total_blocks - + ext4fs_root->sblock.first_data_block), + ext4fs_root->sblock.blocks_per_group); + + /* get the block group descriptor table */ + fs->gdtable_blkno = ((EXT2_MIN_BLOCK_SIZE == fs->blksz) + 1); + if (ext4fs_get_bgdtable() == -1) { + printf("Error in getting the block group descriptor table\n"); + goto fail; + } + fs->bgd = (struct ext2_block_group *)fs->gdtable; + + /* load all the available bitmap block of the partition */ + fs->blk_bmaps = zalloc(fs->no_blkgrp * sizeof(char *)); + if (!fs->blk_bmaps) + goto fail; + for (i = 0; i < fs->no_blkgrp; i++) { + fs->blk_bmaps[i] = zalloc(fs->blksz); + if (!fs->blk_bmaps[i]) + goto fail; + } + + for (i = 0; i < fs->no_blkgrp; i++) { + status = + ext4fs_devread(fs->bgd[i].block_id * fs->sect_perblk, 0, + fs->blksz, (char *)fs->blk_bmaps[i]); + if (status == 0) + goto fail; + } + + /* load all the available inode bitmap of the partition */ + fs->inode_bmaps = zalloc(fs->no_blkgrp * sizeof(unsigned char *)); + if (!fs->inode_bmaps) + goto fail; + for (i = 0; i < fs->no_blkgrp; i++) { + fs->inode_bmaps[i] = zalloc(fs->blksz); + if (!fs->inode_bmaps[i]) + goto fail; + } + + for (i = 0; i < fs->no_blkgrp; i++) { + status = ext4fs_devread(fs->bgd[i].inode_id * fs->sect_perblk, + 0, fs->blksz, + (char *)fs->inode_bmaps[i]); + if (status == 0) + goto fail; + } + + /* + * check filesystem consistency with free blocks of file system + * some time we observed that superblock freeblocks does not match + * with the blockgroups freeblocks when improper + * reboot of a linux kernel + */ + for (i = 0; i < fs->no_blkgrp; i++) + real_free_blocks = real_free_blocks + fs->bgd[i].free_blocks; + if (real_free_blocks != fs->sb->free_blocks) + fs->sb->free_blocks = real_free_blocks; + + return 0; +fail: + ext4fs_deinit(); + + return -1; +} + +void ext4fs_deinit(void) +{ + int i; + struct ext2_inode inode_journal; + struct journal_superblock_t *jsb; + long int blknr; + struct ext_filesystem *fs = get_fs(); + + /* free journal */ + char *temp_buff = zalloc(fs->blksz); + if (temp_buff) { + ext4fs_read_inode(ext4fs_root, EXT2_JOURNAL_INO, + &inode_journal); + blknr = read_allocated_block(&inode_journal, + EXT2_JOURNAL_SUPERBLOCK); + ext4fs_devread(blknr * fs->sect_perblk, 0, fs->blksz, + temp_buff); + jsb = (struct journal_superblock_t *)temp_buff; + jsb->s_start = cpu_to_be32(0); + put_ext4((uint64_t) (blknr * fs->blksz), + (struct journal_superblock_t *)temp_buff, fs->blksz); + free(temp_buff); + } + ext4fs_free_journal(); + + /* get the superblock */ + ext4fs_devread(SUPERBLOCK_SECTOR, 0, SUPERBLOCK_SIZE, (char *)fs->sb); + fs->sb->feature_incompat &= ~EXT3_FEATURE_INCOMPAT_RECOVER; + put_ext4((uint64_t)(SUPERBLOCK_SIZE), + (struct ext2_sblock *)fs->sb, (uint32_t)SUPERBLOCK_SIZE); + free(fs->sb); + fs->sb = NULL; + + if (fs->blk_bmaps) { + for (i = 0; i < fs->no_blkgrp; i++) { + free(fs->blk_bmaps[i]); + fs->blk_bmaps[i] = NULL; + } + free(fs->blk_bmaps); + fs->blk_bmaps = NULL; + } + + if (fs->inode_bmaps) { + for (i = 0; i < fs->no_blkgrp; i++) { + free(fs->inode_bmaps[i]); + fs->inode_bmaps[i] = NULL; + } + free(fs->inode_bmaps); + fs->inode_bmaps = NULL; + } + + + free(fs->gdtable); + fs->gdtable = NULL; + fs->bgd = NULL; + /* + * reinitiliazed the global inode and + * block bitmap first execution check variables + */ + fs->first_pass_ibmap = 0; + fs->first_pass_bbmap = 0; + fs->curr_inode_no = 0; + fs->curr_blkno = 0; +} + +static int ext4fs_write_file(struct ext2_inode *file_inode, + int pos, unsigned int len, char *buf) +{ + int i; + int blockcnt; + int log2blocksize = LOG2_EXT2_BLOCK_SIZE(ext4fs_root); + unsigned int filesize = __le32_to_cpu(file_inode->size); + struct ext_filesystem *fs = get_fs(); + int previous_block_number = -1; + int delayed_start = 0; + int delayed_extent = 0; + int delayed_next = 0; + char *delayed_buf = NULL; + + /* Adjust len so it we can't read past the end of the file. */ + if (len > filesize) + len = filesize; + + blockcnt = ((len + pos) + fs->blksz - 1) / fs->blksz; + + for (i = pos / fs->blksz; i < blockcnt; i++) { + long int blknr; + int blockend = fs->blksz; + int skipfirst = 0; + blknr = read_allocated_block(file_inode, i); + if (blknr < 0) + return -1; + + blknr = blknr << log2blocksize; + + if (blknr) { + if (previous_block_number != -1) { + if (delayed_next == blknr) { + delayed_extent += blockend; + delayed_next += blockend >> SECTOR_BITS; + } else { /* spill */ + put_ext4((uint64_t) (delayed_start * + SECTOR_SIZE), + delayed_buf, + (uint32_t) delayed_extent); + previous_block_number = blknr; + delayed_start = blknr; + delayed_extent = blockend; + delayed_buf = buf; + delayed_next = blknr + + (blockend >> SECTOR_BITS); + } + } else { + previous_block_number = blknr; + delayed_start = blknr; + delayed_extent = blockend; + delayed_buf = buf; + delayed_next = blknr + + (blockend >> SECTOR_BITS); + } + } else { + if (previous_block_number != -1) { + /* spill */ + put_ext4((uint64_t) (delayed_start * + SECTOR_SIZE), delayed_buf, + (uint32_t) delayed_extent); + previous_block_number = -1; + } + memset(buf, 0, fs->blksz - skipfirst); + } + buf += fs->blksz - skipfirst; + } + if (previous_block_number != -1) { + /* spill */ + put_ext4((uint64_t) (delayed_start * SECTOR_SIZE), + delayed_buf, (uint32_t) delayed_extent); + previous_block_number = -1; + } + + return len; +} + +int ext4fs_write(const char *fname, unsigned char *buffer, + unsigned long sizebytes) +{ + int ret = 0; + struct ext2_inode *file_inode = NULL; + unsigned char *inode_buffer = NULL; + int parent_inodeno; + int inodeno; + time_t timestamp = 0; + + uint64_t bytes_reqd_for_file; + unsigned int blks_reqd_for_file; + unsigned int blocks_remaining; + int existing_file_inodeno; + char *temp_ptr = NULL; + long int itable_blkno; + long int parent_itable_blkno; + long int blkoff; + struct ext2_sblock *sblock = &(ext4fs_root->sblock); + unsigned int inodes_per_block; + unsigned int ibmap_idx; + struct ext_filesystem *fs = get_fs(); + ALLOC_CACHE_ALIGN_BUFFER(char, filename, 256); + memset(filename, 0x00, sizeof(filename)); + + g_parent_inode = zalloc(sizeof(struct ext2_inode)); + if (!g_parent_inode) + goto fail; + + if (ext4fs_init() != 0) { + printf("error in File System init\n"); + return -1; + } + inodes_per_block = fs->blksz / fs->inodesz; + parent_inodeno = ext4fs_get_parent_inode_num(fname, filename, F_FILE); + if (parent_inodeno == -1) + goto fail; + if (ext4fs_iget(parent_inodeno, g_parent_inode)) + goto fail; + /* check if the filename is already present in root */ + existing_file_inodeno = ext4fs_filename_check(filename); + if (existing_file_inodeno != -1) { + ret = ext4fs_delete_file(existing_file_inodeno); + fs->first_pass_bbmap = 0; + fs->curr_blkno = 0; + + fs->first_pass_ibmap = 0; + fs->curr_inode_no = 0; + if (ret) + goto fail; + } + /* calucalate how many blocks required */ + bytes_reqd_for_file = sizebytes; + blks_reqd_for_file = lldiv(bytes_reqd_for_file, fs->blksz); + if (do_div(bytes_reqd_for_file, fs->blksz) != 0) { + blks_reqd_for_file++; + debug("total bytes for a file %u\n", blks_reqd_for_file); + } + blocks_remaining = blks_reqd_for_file; + /* test for available space in partition */ + if (fs->sb->free_blocks < blks_reqd_for_file) { + printf("Not enough space on partition !!!\n"); + goto fail; + } + + ext4fs_update_parent_dentry(filename, &inodeno, FILETYPE_REG); + /* prepare file inode */ + inode_buffer = zalloc(fs->inodesz); + if (!inode_buffer) + goto fail; + file_inode = (struct ext2_inode *)inode_buffer; + file_inode->mode = S_IFREG | S_IRWXU | + S_IRGRP | S_IROTH | S_IXGRP | S_IXOTH; + /* ToDo: Update correct time */ + file_inode->mtime = timestamp; + file_inode->atime = timestamp; + file_inode->ctime = timestamp; + file_inode->nlinks = 1; + file_inode->size = sizebytes; + + /* Allocate data blocks */ + ext4fs_allocate_blocks(file_inode, blocks_remaining, + &blks_reqd_for_file); + file_inode->blockcnt = (blks_reqd_for_file * fs->blksz) / SECTOR_SIZE; + + temp_ptr = zalloc(fs->blksz); + if (!temp_ptr) + goto fail; + ibmap_idx = inodeno / ext4fs_root->sblock.inodes_per_group; + inodeno--; + itable_blkno = __le32_to_cpu(fs->bgd[ibmap_idx].inode_table_id) + + (inodeno % __le32_to_cpu(sblock->inodes_per_group)) / + inodes_per_block; + blkoff = (inodeno % inodes_per_block) * fs->inodesz; + ext4fs_devread(itable_blkno * fs->sect_perblk, 0, fs->blksz, temp_ptr); + if (ext4fs_log_journal(temp_ptr, itable_blkno)) + goto fail; + + memcpy(temp_ptr + blkoff, inode_buffer, fs->inodesz); + if (ext4fs_put_metadata(temp_ptr, itable_blkno)) + goto fail; + /* copy the file content into data blocks */ + if (ext4fs_write_file(file_inode, 0, sizebytes, (char *)buffer) == -1) { + printf("Error in copying content\n"); + goto fail; + } + ibmap_idx = parent_inodeno / ext4fs_root->sblock.inodes_per_group; + parent_inodeno--; + parent_itable_blkno = __le32_to_cpu(fs->bgd[ibmap_idx].inode_table_id) + + (parent_inodeno % + __le32_to_cpu(sblock->inodes_per_group)) / inodes_per_block; + blkoff = (parent_inodeno % inodes_per_block) * fs->inodesz; + if (parent_itable_blkno != itable_blkno) { + memset(temp_ptr, '\0', fs->blksz); + ext4fs_devread(parent_itable_blkno * fs->sect_perblk, + 0, fs->blksz, temp_ptr); + if (ext4fs_log_journal(temp_ptr, parent_itable_blkno)) + goto fail; + + memcpy(temp_ptr + blkoff, g_parent_inode, + sizeof(struct ext2_inode)); + if (ext4fs_put_metadata(temp_ptr, parent_itable_blkno)) + goto fail; + free(temp_ptr); + } else { + /* + * If parent and child fall in same inode table block + * both should be kept in 1 buffer + */ + memcpy(temp_ptr + blkoff, g_parent_inode, + sizeof(struct ext2_inode)); + gd_index--; + if (ext4fs_put_metadata(temp_ptr, itable_blkno)) + goto fail; + free(temp_ptr); + } + ext4fs_update(); + ext4fs_deinit(); + + fs->first_pass_bbmap = 0; + fs->curr_blkno = 0; + fs->first_pass_ibmap = 0; + fs->curr_inode_no = 0; + free(inode_buffer); + free(g_parent_inode); + g_parent_inode = NULL; + + return 0; +fail: + ext4fs_deinit(); + free(inode_buffer); + free(g_parent_inode); + g_parent_inode = NULL; + + return -1; +} diff --git a/fs/ext4/ext4fs.c b/fs/ext4/ext4fs.c index f02c215ccc..4dddde2476 100644 --- a/fs/ext4/ext4fs.c +++ b/fs/ext4/ext4fs.c @@ -34,13 +34,8 @@ */ #include <common.h> -#include <malloc.h> #include <ext_common.h> #include <ext4fs.h> -#include <linux/stat.h> -#include <linux/time.h> -#include <asm/byteorder.h> -#include <div64.h> #include "ext4_common.h" int ext4fs_symlinknest; @@ -197,960 +192,39 @@ int ext4fs_read(char *buf, unsigned len) return ext4fs_read_file(ext4fs_file, 0, len, buf); } -#if defined(CONFIG_EXT4_WRITE) -static void ext4fs_update(void) +int ext4fs_probe(block_dev_desc_t *fs_dev_desc, + disk_partition_t *fs_partition) { - short i; - ext4fs_update_journal(); - struct ext_filesystem *fs = get_fs(); + ext4fs_set_blk_dev(fs_dev_desc, fs_partition); - /* update super block */ - put_ext4((uint64_t)(SUPERBLOCK_SIZE), - (struct ext2_sblock *)fs->sb, (uint32_t)SUPERBLOCK_SIZE); - - /* update block groups */ - for (i = 0; i < fs->no_blkgrp; i++) { - fs->bgd[i].bg_checksum = ext4fs_checksum_update(i); - put_ext4((uint64_t)(fs->bgd[i].block_id * fs->blksz), - fs->blk_bmaps[i], fs->blksz); - } - - /* update inode table groups */ - for (i = 0; i < fs->no_blkgrp; i++) { - put_ext4((uint64_t) (fs->bgd[i].inode_id * fs->blksz), - fs->inode_bmaps[i], fs->blksz); - } - - /* update the block group descriptor table */ - put_ext4((uint64_t)(fs->gdtable_blkno * fs->blksz), - (struct ext2_block_group *)fs->gdtable, - (fs->blksz * fs->no_blk_pergdt)); - - ext4fs_dump_metadata(); - - gindex = 0; - gd_index = 0; -} - -int ext4fs_get_bgdtable(void) -{ - int status; - int grp_desc_size; - struct ext_filesystem *fs = get_fs(); - grp_desc_size = sizeof(struct ext2_block_group); - fs->no_blk_pergdt = (fs->no_blkgrp * grp_desc_size) / fs->blksz; - if ((fs->no_blkgrp * grp_desc_size) % fs->blksz) - fs->no_blk_pergdt++; - - /* allocate memory for gdtable */ - fs->gdtable = zalloc(fs->blksz * fs->no_blk_pergdt); - if (!fs->gdtable) - return -ENOMEM; - /* read the group descriptor table */ - status = ext4fs_devread(fs->gdtable_blkno * fs->sect_perblk, 0, - fs->blksz * fs->no_blk_pergdt, fs->gdtable); - if (status == 0) - goto fail; - - if (ext4fs_log_gdt(fs->gdtable)) { - printf("Error in ext4fs_log_gdt\n"); + if (!ext4fs_mount(fs_partition->size)) { + ext4fs_close(); return -1; } return 0; -fail: - free(fs->gdtable); - fs->gdtable = NULL; - - return -1; -} - -static void delete_single_indirect_block(struct ext2_inode *inode) -{ - struct ext2_block_group *bgd = NULL; - static int prev_bg_bmap_idx = -1; - long int blknr; - int remainder; - int bg_idx; - int status; - unsigned int blk_per_grp = ext4fs_root->sblock.blocks_per_group; - struct ext_filesystem *fs = get_fs(); - char *journal_buffer = zalloc(fs->blksz); - if (!journal_buffer) { - printf("No memory\n"); - return; - } - /* get block group descriptor table */ - bgd = (struct ext2_block_group *)fs->gdtable; - - /* deleting the single indirect block associated with inode */ - if (inode->b.blocks.indir_block != 0) { - debug("SIPB releasing %u\n", inode->b.blocks.indir_block); - blknr = inode->b.blocks.indir_block; - if (fs->blksz != 1024) { - bg_idx = blknr / blk_per_grp; - } else { - bg_idx = blknr / blk_per_grp; - remainder = blknr % blk_per_grp; - if (!remainder) - bg_idx--; - } - ext4fs_reset_block_bmap(blknr, fs->blk_bmaps[bg_idx], bg_idx); - bgd[bg_idx].free_blocks++; - fs->sb->free_blocks++; - /* journal backup */ - if (prev_bg_bmap_idx != bg_idx) { - status = - ext4fs_devread(bgd[bg_idx].block_id * - fs->sect_perblk, 0, fs->blksz, - journal_buffer); - if (status == 0) - goto fail; - if (ext4fs_log_journal - (journal_buffer, bgd[bg_idx].block_id)) - goto fail; - prev_bg_bmap_idx = bg_idx; - } - } -fail: - free(journal_buffer); -} - -static void delete_double_indirect_block(struct ext2_inode *inode) -{ - int i; - short status; - static int prev_bg_bmap_idx = -1; - long int blknr; - int remainder; - int bg_idx; - unsigned int blk_per_grp = ext4fs_root->sblock.blocks_per_group; - unsigned int *di_buffer = NULL; - unsigned int *DIB_start_addr = NULL; - struct ext2_block_group *bgd = NULL; - struct ext_filesystem *fs = get_fs(); - char *journal_buffer = zalloc(fs->blksz); - if (!journal_buffer) { - printf("No memory\n"); - return; - } - /* get the block group descriptor table */ - bgd = (struct ext2_block_group *)fs->gdtable; - - if (inode->b.blocks.double_indir_block != 0) { - di_buffer = zalloc(fs->blksz); - if (!di_buffer) { - printf("No memory\n"); - return; - } - DIB_start_addr = (unsigned int *)di_buffer; - blknr = inode->b.blocks.double_indir_block; - status = ext4fs_devread(blknr * fs->sect_perblk, 0, fs->blksz, - (char *)di_buffer); - for (i = 0; i < fs->blksz / sizeof(int); i++) { - if (*di_buffer == 0) - break; - - debug("DICB releasing %u\n", *di_buffer); - if (fs->blksz != 1024) { - bg_idx = (*di_buffer) / blk_per_grp; - } else { - bg_idx = (*di_buffer) / blk_per_grp; - remainder = (*di_buffer) % blk_per_grp; - if (!remainder) - bg_idx--; - } - ext4fs_reset_block_bmap(*di_buffer, - fs->blk_bmaps[bg_idx], bg_idx); - di_buffer++; - bgd[bg_idx].free_blocks++; - fs->sb->free_blocks++; - /* journal backup */ - if (prev_bg_bmap_idx != bg_idx) { - status = ext4fs_devread(bgd[bg_idx].block_id - * fs->sect_perblk, 0, - fs->blksz, - journal_buffer); - if (status == 0) - goto fail; - - if (ext4fs_log_journal(journal_buffer, - bgd[bg_idx].block_id)) - goto fail; - prev_bg_bmap_idx = bg_idx; - } - } - - /* removing the parent double indirect block */ - blknr = inode->b.blocks.double_indir_block; - if (fs->blksz != 1024) { - bg_idx = blknr / blk_per_grp; - } else { - bg_idx = blknr / blk_per_grp; - remainder = blknr % blk_per_grp; - if (!remainder) - bg_idx--; - } - ext4fs_reset_block_bmap(blknr, fs->blk_bmaps[bg_idx], bg_idx); - bgd[bg_idx].free_blocks++; - fs->sb->free_blocks++; - /* journal backup */ - if (prev_bg_bmap_idx != bg_idx) { - memset(journal_buffer, '\0', fs->blksz); - status = ext4fs_devread(bgd[bg_idx].block_id * - fs->sect_perblk, 0, fs->blksz, - journal_buffer); - if (status == 0) - goto fail; - - if (ext4fs_log_journal(journal_buffer, - bgd[bg_idx].block_id)) - goto fail; - prev_bg_bmap_idx = bg_idx; - } - debug("DIPB releasing %ld\n", blknr); - } -fail: - free(DIB_start_addr); - free(journal_buffer); -} - -static void delete_triple_indirect_block(struct ext2_inode *inode) -{ - int i, j; - short status; - static int prev_bg_bmap_idx = -1; - long int blknr; - int remainder; - int bg_idx; - unsigned int blk_per_grp = ext4fs_root->sblock.blocks_per_group; - unsigned int *tigp_buffer = NULL; - unsigned int *tib_start_addr = NULL; - unsigned int *tip_buffer = NULL; - unsigned int *tipb_start_addr = NULL; - struct ext2_block_group *bgd = NULL; - struct ext_filesystem *fs = get_fs(); - char *journal_buffer = zalloc(fs->blksz); - if (!journal_buffer) { - printf("No memory\n"); - return; - } - /* get block group descriptor table */ - bgd = (struct ext2_block_group *)fs->gdtable; - - if (inode->b.blocks.triple_indir_block != 0) { - tigp_buffer = zalloc(fs->blksz); - if (!tigp_buffer) { - printf("No memory\n"); - return; - } - tib_start_addr = (unsigned int *)tigp_buffer; - blknr = inode->b.blocks.triple_indir_block; - status = ext4fs_devread(blknr * fs->sect_perblk, 0, fs->blksz, - (char *)tigp_buffer); - for (i = 0; i < fs->blksz / sizeof(int); i++) { - if (*tigp_buffer == 0) - break; - debug("tigp buffer releasing %u\n", *tigp_buffer); - - tip_buffer = zalloc(fs->blksz); - if (!tip_buffer) - goto fail; - tipb_start_addr = (unsigned int *)tip_buffer; - status = ext4fs_devread((*tigp_buffer) * - fs->sect_perblk, 0, fs->blksz, - (char *)tip_buffer); - for (j = 0; j < fs->blksz / sizeof(int); j++) { - if (*tip_buffer == 0) - break; - if (fs->blksz != 1024) { - bg_idx = (*tip_buffer) / blk_per_grp; - } else { - bg_idx = (*tip_buffer) / blk_per_grp; - - remainder = (*tip_buffer) % blk_per_grp; - if (!remainder) - bg_idx--; - } - - ext4fs_reset_block_bmap(*tip_buffer, - fs->blk_bmaps[bg_idx], - bg_idx); - - tip_buffer++; - bgd[bg_idx].free_blocks++; - fs->sb->free_blocks++; - /* journal backup */ - if (prev_bg_bmap_idx != bg_idx) { - status = - ext4fs_devread( - bgd[bg_idx].block_id * - fs->sect_perblk, 0, - fs->blksz, - journal_buffer); - if (status == 0) - goto fail; - - if (ext4fs_log_journal(journal_buffer, - bgd[bg_idx]. - block_id)) - goto fail; - prev_bg_bmap_idx = bg_idx; - } - } - free(tipb_start_addr); - tipb_start_addr = NULL; - - /* - * removing the grand parent blocks - * which is connected to inode - */ - if (fs->blksz != 1024) { - bg_idx = (*tigp_buffer) / blk_per_grp; - } else { - bg_idx = (*tigp_buffer) / blk_per_grp; - - remainder = (*tigp_buffer) % blk_per_grp; - if (!remainder) - bg_idx--; - } - ext4fs_reset_block_bmap(*tigp_buffer, - fs->blk_bmaps[bg_idx], bg_idx); - - tigp_buffer++; - bgd[bg_idx].free_blocks++; - fs->sb->free_blocks++; - /* journal backup */ - if (prev_bg_bmap_idx != bg_idx) { - memset(journal_buffer, '\0', fs->blksz); - status = - ext4fs_devread(bgd[bg_idx].block_id * - fs->sect_perblk, 0, - fs->blksz, journal_buffer); - if (status == 0) - goto fail; - - if (ext4fs_log_journal(journal_buffer, - bgd[bg_idx].block_id)) - goto fail; - prev_bg_bmap_idx = bg_idx; - } - } - - /* removing the grand parent triple indirect block */ - blknr = inode->b.blocks.triple_indir_block; - if (fs->blksz != 1024) { - bg_idx = blknr / blk_per_grp; - } else { - bg_idx = blknr / blk_per_grp; - remainder = blknr % blk_per_grp; - if (!remainder) - bg_idx--; - } - ext4fs_reset_block_bmap(blknr, fs->blk_bmaps[bg_idx], bg_idx); - bgd[bg_idx].free_blocks++; - fs->sb->free_blocks++; - /* journal backup */ - if (prev_bg_bmap_idx != bg_idx) { - memset(journal_buffer, '\0', fs->blksz); - status = ext4fs_devread(bgd[bg_idx].block_id * - fs->sect_perblk, 0, fs->blksz, - journal_buffer); - if (status == 0) - goto fail; - - if (ext4fs_log_journal(journal_buffer, - bgd[bg_idx].block_id)) - goto fail; - prev_bg_bmap_idx = bg_idx; - } - debug("tigp buffer itself releasing %ld\n", blknr); - } -fail: - free(tib_start_addr); - free(tipb_start_addr); - free(journal_buffer); -} - -static int ext4fs_delete_file(int inodeno) -{ - struct ext2_inode inode; - short status; - int i; - int remainder; - long int blknr; - int bg_idx; - int ibmap_idx; - char *read_buffer = NULL; - char *start_block_address = NULL; - unsigned int no_blocks; - - static int prev_bg_bmap_idx = -1; - unsigned int inodes_per_block; - long int blkno; - unsigned int blkoff; - unsigned int blk_per_grp = ext4fs_root->sblock.blocks_per_group; - unsigned int inode_per_grp = ext4fs_root->sblock.inodes_per_group; - struct ext2_inode *inode_buffer = NULL; - struct ext2_block_group *bgd = NULL; - struct ext_filesystem *fs = get_fs(); - char *journal_buffer = zalloc(fs->blksz); - if (!journal_buffer) - return -ENOMEM; - /* get the block group descriptor table */ - bgd = (struct ext2_block_group *)fs->gdtable; - status = ext4fs_read_inode(ext4fs_root, inodeno, &inode); - if (status == 0) - goto fail; - - /* read the block no allocated to a file */ - no_blocks = inode.size / fs->blksz; - if (inode.size % fs->blksz) - no_blocks++; - - if (le32_to_cpu(inode.flags) & EXT4_EXTENTS_FL) { - struct ext2fs_node *node_inode = - zalloc(sizeof(struct ext2fs_node)); - if (!node_inode) - goto fail; - node_inode->data = ext4fs_root; - node_inode->ino = inodeno; - node_inode->inode_read = 0; - memcpy(&(node_inode->inode), &inode, sizeof(struct ext2_inode)); - - for (i = 0; i < no_blocks; i++) { - blknr = read_allocated_block(&(node_inode->inode), i); - if (fs->blksz != 1024) { - bg_idx = blknr / blk_per_grp; - } else { - bg_idx = blknr / blk_per_grp; - remainder = blknr % blk_per_grp; - if (!remainder) - bg_idx--; - } - ext4fs_reset_block_bmap(blknr, fs->blk_bmaps[bg_idx], - bg_idx); - debug("EXT4_EXTENTS Block releasing %ld: %d\n", - blknr, bg_idx); - - bgd[bg_idx].free_blocks++; - fs->sb->free_blocks++; - - /* journal backup */ - if (prev_bg_bmap_idx != bg_idx) { - status = - ext4fs_devread(bgd[bg_idx].block_id * - fs->sect_perblk, 0, - fs->blksz, journal_buffer); - if (status == 0) - goto fail; - if (ext4fs_log_journal(journal_buffer, - bgd[bg_idx].block_id)) - goto fail; - prev_bg_bmap_idx = bg_idx; - } - } - if (node_inode) { - free(node_inode); - node_inode = NULL; - } - } else { - - delete_single_indirect_block(&inode); - delete_double_indirect_block(&inode); - delete_triple_indirect_block(&inode); - - /* read the block no allocated to a file */ - no_blocks = inode.size / fs->blksz; - if (inode.size % fs->blksz) - no_blocks++; - for (i = 0; i < no_blocks; i++) { - blknr = read_allocated_block(&inode, i); - if (fs->blksz != 1024) { - bg_idx = blknr / blk_per_grp; - } else { - bg_idx = blknr / blk_per_grp; - remainder = blknr % blk_per_grp; - if (!remainder) - bg_idx--; - } - ext4fs_reset_block_bmap(blknr, fs->blk_bmaps[bg_idx], - bg_idx); - debug("ActualB releasing %ld: %d\n", blknr, bg_idx); - - bgd[bg_idx].free_blocks++; - fs->sb->free_blocks++; - /* journal backup */ - if (prev_bg_bmap_idx != bg_idx) { - memset(journal_buffer, '\0', fs->blksz); - status = ext4fs_devread(bgd[bg_idx].block_id - * fs->sect_perblk, - 0, fs->blksz, - journal_buffer); - if (status == 0) - goto fail; - if (ext4fs_log_journal(journal_buffer, - bgd[bg_idx].block_id)) - goto fail; - prev_bg_bmap_idx = bg_idx; - } - } - } - - /* from the inode no to blockno */ - inodes_per_block = fs->blksz / fs->inodesz; - ibmap_idx = inodeno / inode_per_grp; - - /* get the block no */ - inodeno--; - blkno = __le32_to_cpu(bgd[ibmap_idx].inode_table_id) + - (inodeno % __le32_to_cpu(inode_per_grp)) / inodes_per_block; - - /* get the offset of the inode */ - blkoff = ((inodeno) % inodes_per_block) * fs->inodesz; - - /* read the block no containing the inode */ - read_buffer = zalloc(fs->blksz); - if (!read_buffer) - goto fail; - start_block_address = read_buffer; - status = ext4fs_devread(blkno * fs->sect_perblk, - 0, fs->blksz, read_buffer); - if (status == 0) - goto fail; - - if (ext4fs_log_journal(read_buffer, blkno)) - goto fail; - - read_buffer = read_buffer + blkoff; - inode_buffer = (struct ext2_inode *)read_buffer; - memset(inode_buffer, '\0', sizeof(struct ext2_inode)); - - /* write the inode to original position in inode table */ - if (ext4fs_put_metadata(start_block_address, blkno)) - goto fail; - - /* update the respective inode bitmaps */ - inodeno++; - ext4fs_reset_inode_bmap(inodeno, fs->inode_bmaps[ibmap_idx], ibmap_idx); - bgd[ibmap_idx].free_inodes++; - fs->sb->free_inodes++; - /* journal backup */ - memset(journal_buffer, '\0', fs->blksz); - status = ext4fs_devread(bgd[ibmap_idx].inode_id * - fs->sect_perblk, 0, fs->blksz, journal_buffer); - if (status == 0) - goto fail; - if (ext4fs_log_journal(journal_buffer, bgd[ibmap_idx].inode_id)) - goto fail; - - ext4fs_update(); - ext4fs_deinit(); - - if (ext4fs_init() != 0) { - printf("error in File System init\n"); - goto fail; - } - - free(start_block_address); - free(journal_buffer); - - return 0; -fail: - free(start_block_address); - free(journal_buffer); - - return -1; -} - -int ext4fs_init(void) -{ - short status; - int i; - unsigned int real_free_blocks = 0; - struct ext_filesystem *fs = get_fs(); - - /* populate fs */ - fs->blksz = EXT2_BLOCK_SIZE(ext4fs_root); - fs->inodesz = INODE_SIZE_FILESYSTEM(ext4fs_root); - fs->sect_perblk = fs->blksz / SECTOR_SIZE; - - /* get the superblock */ - fs->sb = zalloc(SUPERBLOCK_SIZE); - if (!fs->sb) - return -ENOMEM; - if (!ext4fs_devread(SUPERBLOCK_SECTOR, 0, SUPERBLOCK_SIZE, - (char *)fs->sb)) - goto fail; - - /* init journal */ - if (ext4fs_init_journal()) - goto fail; - - /* get total no of blockgroups */ - fs->no_blkgrp = (uint32_t)ext4fs_div_roundup( - (ext4fs_root->sblock.total_blocks - - ext4fs_root->sblock.first_data_block), - ext4fs_root->sblock.blocks_per_group); - - /* get the block group descriptor table */ - fs->gdtable_blkno = ((EXT2_MIN_BLOCK_SIZE == fs->blksz) + 1); - if (ext4fs_get_bgdtable() == -1) { - printf("Error in getting the block group descriptor table\n"); - goto fail; - } - fs->bgd = (struct ext2_block_group *)fs->gdtable; - - /* load all the available bitmap block of the partition */ - fs->blk_bmaps = zalloc(fs->no_blkgrp * sizeof(char *)); - if (!fs->blk_bmaps) - goto fail; - for (i = 0; i < fs->no_blkgrp; i++) { - fs->blk_bmaps[i] = zalloc(fs->blksz); - if (!fs->blk_bmaps[i]) - goto fail; - } - - for (i = 0; i < fs->no_blkgrp; i++) { - status = - ext4fs_devread(fs->bgd[i].block_id * fs->sect_perblk, 0, - fs->blksz, (char *)fs->blk_bmaps[i]); - if (status == 0) - goto fail; - } - - /* load all the available inode bitmap of the partition */ - fs->inode_bmaps = zalloc(fs->no_blkgrp * sizeof(unsigned char *)); - if (!fs->inode_bmaps) - goto fail; - for (i = 0; i < fs->no_blkgrp; i++) { - fs->inode_bmaps[i] = zalloc(fs->blksz); - if (!fs->inode_bmaps[i]) - goto fail; - } - - for (i = 0; i < fs->no_blkgrp; i++) { - status = ext4fs_devread(fs->bgd[i].inode_id * fs->sect_perblk, - 0, fs->blksz, - (char *)fs->inode_bmaps[i]); - if (status == 0) - goto fail; - } - - /* - * check filesystem consistency with free blocks of file system - * some time we observed that superblock freeblocks does not match - * with the blockgroups freeblocks when improper - * reboot of a linux kernel - */ - for (i = 0; i < fs->no_blkgrp; i++) - real_free_blocks = real_free_blocks + fs->bgd[i].free_blocks; - if (real_free_blocks != fs->sb->free_blocks) - fs->sb->free_blocks = real_free_blocks; - - return 0; -fail: - ext4fs_deinit(); - - return -1; -} - -void ext4fs_deinit(void) -{ - int i; - struct ext2_inode inode_journal; - struct journal_superblock_t *jsb; - long int blknr; - struct ext_filesystem *fs = get_fs(); - - /* free journal */ - char *temp_buff = zalloc(fs->blksz); - if (temp_buff) { - ext4fs_read_inode(ext4fs_root, EXT2_JOURNAL_INO, - &inode_journal); - blknr = read_allocated_block(&inode_journal, - EXT2_JOURNAL_SUPERBLOCK); - ext4fs_devread(blknr * fs->sect_perblk, 0, fs->blksz, - temp_buff); - jsb = (struct journal_superblock_t *)temp_buff; - jsb->s_start = cpu_to_be32(0); - put_ext4((uint64_t) (blknr * fs->blksz), - (struct journal_superblock_t *)temp_buff, fs->blksz); - free(temp_buff); - } - ext4fs_free_journal(); - - /* get the superblock */ - ext4fs_devread(SUPERBLOCK_SECTOR, 0, SUPERBLOCK_SIZE, (char *)fs->sb); - fs->sb->feature_incompat &= ~EXT3_FEATURE_INCOMPAT_RECOVER; - put_ext4((uint64_t)(SUPERBLOCK_SIZE), - (struct ext2_sblock *)fs->sb, (uint32_t)SUPERBLOCK_SIZE); - free(fs->sb); - fs->sb = NULL; - - if (fs->blk_bmaps) { - for (i = 0; i < fs->no_blkgrp; i++) { - free(fs->blk_bmaps[i]); - fs->blk_bmaps[i] = NULL; - } - free(fs->blk_bmaps); - fs->blk_bmaps = NULL; - } - - if (fs->inode_bmaps) { - for (i = 0; i < fs->no_blkgrp; i++) { - free(fs->inode_bmaps[i]); - fs->inode_bmaps[i] = NULL; - } - free(fs->inode_bmaps); - fs->inode_bmaps = NULL; - } - - - free(fs->gdtable); - fs->gdtable = NULL; - fs->bgd = NULL; - /* - * reinitiliazed the global inode and - * block bitmap first execution check variables - */ - fs->first_pass_ibmap = 0; - fs->first_pass_bbmap = 0; - fs->curr_inode_no = 0; - fs->curr_blkno = 0; -} - -static int ext4fs_write_file(struct ext2_inode *file_inode, - int pos, unsigned int len, char *buf) -{ - int i; - int blockcnt; - int log2blocksize = LOG2_EXT2_BLOCK_SIZE(ext4fs_root); - unsigned int filesize = __le32_to_cpu(file_inode->size); - struct ext_filesystem *fs = get_fs(); - int previous_block_number = -1; - int delayed_start = 0; - int delayed_extent = 0; - int delayed_next = 0; - char *delayed_buf = NULL; - - /* Adjust len so it we can't read past the end of the file. */ - if (len > filesize) - len = filesize; - - blockcnt = ((len + pos) + fs->blksz - 1) / fs->blksz; - - for (i = pos / fs->blksz; i < blockcnt; i++) { - long int blknr; - int blockend = fs->blksz; - int skipfirst = 0; - blknr = read_allocated_block(file_inode, i); - if (blknr < 0) - return -1; - - blknr = blknr << log2blocksize; - - if (blknr) { - if (previous_block_number != -1) { - if (delayed_next == blknr) { - delayed_extent += blockend; - delayed_next += blockend >> SECTOR_BITS; - } else { /* spill */ - put_ext4((uint64_t) (delayed_start * - SECTOR_SIZE), - delayed_buf, - (uint32_t) delayed_extent); - previous_block_number = blknr; - delayed_start = blknr; - delayed_extent = blockend; - delayed_buf = buf; - delayed_next = blknr + - (blockend >> SECTOR_BITS); - } - } else { - previous_block_number = blknr; - delayed_start = blknr; - delayed_extent = blockend; - delayed_buf = buf; - delayed_next = blknr + - (blockend >> SECTOR_BITS); - } - } else { - if (previous_block_number != -1) { - /* spill */ - put_ext4((uint64_t) (delayed_start * - SECTOR_SIZE), delayed_buf, - (uint32_t) delayed_extent); - previous_block_number = -1; - } - memset(buf, 0, fs->blksz - skipfirst); - } - buf += fs->blksz - skipfirst; - } - if (previous_block_number != -1) { - /* spill */ - put_ext4((uint64_t) (delayed_start * SECTOR_SIZE), - delayed_buf, (uint32_t) delayed_extent); - previous_block_number = -1; - } - - return len; } -int ext4fs_write(const char *fname, unsigned char *buffer, - unsigned long sizebytes) +int ext4_read_file(const char *filename, void *buf, int offset, int len) { - int ret = 0; - struct ext2_inode *file_inode = NULL; - unsigned char *inode_buffer = NULL; - int parent_inodeno; - int inodeno; - time_t timestamp = 0; - - uint64_t bytes_reqd_for_file; - unsigned int blks_reqd_for_file; - unsigned int blocks_remaining; - int existing_file_inodeno; - char *temp_ptr = NULL; - long int itable_blkno; - long int parent_itable_blkno; - long int blkoff; - struct ext2_sblock *sblock = &(ext4fs_root->sblock); - unsigned int inodes_per_block; - unsigned int ibmap_idx; - struct ext_filesystem *fs = get_fs(); - ALLOC_CACHE_ALIGN_BUFFER(char, filename, 256); - memset(filename, 0x00, sizeof(filename)); + int file_len; + int len_read; - g_parent_inode = zalloc(sizeof(struct ext2_inode)); - if (!g_parent_inode) - goto fail; - - if (ext4fs_init() != 0) { - printf("error in File System init\n"); + if (offset != 0) { + printf("** Cannot support non-zero offset **\n"); return -1; } - inodes_per_block = fs->blksz / fs->inodesz; - parent_inodeno = ext4fs_get_parent_inode_num(fname, filename, F_FILE); - if (parent_inodeno == -1) - goto fail; - if (ext4fs_iget(parent_inodeno, g_parent_inode)) - goto fail; - /* check if the filename is already present in root */ - existing_file_inodeno = ext4fs_filename_check(filename); - if (existing_file_inodeno != -1) { - ret = ext4fs_delete_file(existing_file_inodeno); - fs->first_pass_bbmap = 0; - fs->curr_blkno = 0; - - fs->first_pass_ibmap = 0; - fs->curr_inode_no = 0; - if (ret) - goto fail; - } - /* calucalate how many blocks required */ - bytes_reqd_for_file = sizebytes; - blks_reqd_for_file = lldiv(bytes_reqd_for_file, fs->blksz); - if (do_div(bytes_reqd_for_file, fs->blksz) != 0) { - blks_reqd_for_file++; - debug("total bytes for a file %u\n", blks_reqd_for_file); - } - blocks_remaining = blks_reqd_for_file; - /* test for available space in partition */ - if (fs->sb->free_blocks < blks_reqd_for_file) { - printf("Not enough space on partition !!!\n"); - goto fail; - } - ext4fs_update_parent_dentry(filename, &inodeno, FILETYPE_REG); - /* prepare file inode */ - inode_buffer = zalloc(fs->inodesz); - if (!inode_buffer) - goto fail; - file_inode = (struct ext2_inode *)inode_buffer; - file_inode->mode = S_IFREG | S_IRWXU | - S_IRGRP | S_IROTH | S_IXGRP | S_IXOTH; - /* ToDo: Update correct time */ - file_inode->mtime = timestamp; - file_inode->atime = timestamp; - file_inode->ctime = timestamp; - file_inode->nlinks = 1; - file_inode->size = sizebytes; - - /* Allocate data blocks */ - ext4fs_allocate_blocks(file_inode, blocks_remaining, - &blks_reqd_for_file); - file_inode->blockcnt = (blks_reqd_for_file * fs->blksz) / SECTOR_SIZE; - - temp_ptr = zalloc(fs->blksz); - if (!temp_ptr) - goto fail; - ibmap_idx = inodeno / ext4fs_root->sblock.inodes_per_group; - inodeno--; - itable_blkno = __le32_to_cpu(fs->bgd[ibmap_idx].inode_table_id) + - (inodeno % __le32_to_cpu(sblock->inodes_per_group)) / - inodes_per_block; - blkoff = (inodeno % inodes_per_block) * fs->inodesz; - ext4fs_devread(itable_blkno * fs->sect_perblk, 0, fs->blksz, temp_ptr); - if (ext4fs_log_journal(temp_ptr, itable_blkno)) - goto fail; - - memcpy(temp_ptr + blkoff, inode_buffer, fs->inodesz); - if (ext4fs_put_metadata(temp_ptr, itable_blkno)) - goto fail; - /* copy the file content into data blocks */ - if (ext4fs_write_file(file_inode, 0, sizebytes, (char *)buffer) == -1) { - printf("Error in copying content\n"); - goto fail; - } - ibmap_idx = parent_inodeno / ext4fs_root->sblock.inodes_per_group; - parent_inodeno--; - parent_itable_blkno = __le32_to_cpu(fs->bgd[ibmap_idx].inode_table_id) + - (parent_inodeno % - __le32_to_cpu(sblock->inodes_per_group)) / inodes_per_block; - blkoff = (parent_inodeno % inodes_per_block) * fs->inodesz; - if (parent_itable_blkno != itable_blkno) { - memset(temp_ptr, '\0', fs->blksz); - ext4fs_devread(parent_itable_blkno * fs->sect_perblk, - 0, fs->blksz, temp_ptr); - if (ext4fs_log_journal(temp_ptr, parent_itable_blkno)) - goto fail; - - memcpy(temp_ptr + blkoff, g_parent_inode, - sizeof(struct ext2_inode)); - if (ext4fs_put_metadata(temp_ptr, parent_itable_blkno)) - goto fail; - free(temp_ptr); - } else { - /* - * If parent and child fall in same inode table block - * both should be kept in 1 buffer - */ - memcpy(temp_ptr + blkoff, g_parent_inode, - sizeof(struct ext2_inode)); - gd_index--; - if (ext4fs_put_metadata(temp_ptr, itable_blkno)) - goto fail; - free(temp_ptr); + file_len = ext4fs_open(filename); + if (file_len < 0) { + printf("** File not found %s **\n", filename); + return -1; } - ext4fs_update(); - ext4fs_deinit(); - fs->first_pass_bbmap = 0; - fs->curr_blkno = 0; - fs->first_pass_ibmap = 0; - fs->curr_inode_no = 0; - free(inode_buffer); - free(g_parent_inode); - g_parent_inode = NULL; + if (len == 0) + len = file_len; - return 0; -fail: - ext4fs_deinit(); - free(inode_buffer); - free(g_parent_inode); - g_parent_inode = NULL; + len_read = ext4fs_read(buf, len); - return -1; + return len_read; } -#endif diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 66d54738a0..b0fac5e1ed 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -1260,3 +1260,20 @@ long file_fat_read(const char *filename, void *buffer, unsigned long maxsize) { return file_fat_read_at(filename, 0, buffer, maxsize); } + +int fat_read_file(const char *filename, void *buf, int offset, int len) +{ + int len_read; + + len_read = file_fat_read_at(filename, offset, buf, len); + if (len_read == -1) { + printf("** Unable to read file %s **\n", filename); + return -1; + } + + return len_read; +} + +void fat_close(void) +{ +} @@ -20,6 +20,8 @@ #include <ext4fs.h> #include <fat.h> #include <fs.h> +#include <sandboxfs.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -27,145 +29,103 @@ static block_dev_desc_t *fs_dev_desc; static disk_partition_t fs_partition; static int fs_type = FS_TYPE_ANY; -static inline int fs_ls_unsupported(const char *dirname) +static inline int fs_probe_unsupported(block_dev_desc_t *fs_dev_desc, + disk_partition_t *fs_partition) { printf("** Unrecognized filesystem type **\n"); return -1; } -static inline int fs_read_unsupported(const char *filename, ulong addr, - int offset, int len) -{ - printf("** Unrecognized filesystem type **\n"); - return -1; -} - -#ifdef CONFIG_FS_FAT -static int fs_probe_fat(void) -{ - return fat_set_blk_dev(fs_dev_desc, &fs_partition); -} - -static void fs_close_fat(void) -{ -} - -#define fs_ls_fat file_fat_ls - -static int fs_read_fat(const char *filename, ulong addr, int offset, int len) -{ - int len_read; - - len_read = file_fat_read_at(filename, offset, - (unsigned char *)addr, len); - if (len_read == -1) { - printf("** Unable to read file %s **\n", filename); - return -1; - } - - return len_read; -} -#else -static inline int fs_probe_fat(void) +static inline int fs_ls_unsupported(const char *dirname) { return -1; } -static inline void fs_close_fat(void) -{ -} - -#define fs_ls_fat fs_ls_unsupported -#define fs_read_fat fs_read_unsupported -#endif - -#ifdef CONFIG_FS_EXT4 -static int fs_probe_ext(void) -{ - ext4fs_set_blk_dev(fs_dev_desc, &fs_partition); - - if (!ext4fs_mount(fs_partition.size)) { - ext4fs_close(); - return -1; - } - - return 0; -} - -static void fs_close_ext(void) -{ - ext4fs_close(); -} - -#define fs_ls_ext ext4fs_ls - -static int fs_read_ext(const char *filename, ulong addr, int offset, int len) -{ - int file_len; - int len_read; - - if (offset != 0) { - printf("** Cannot support non-zero offset **\n"); - return -1; - } - - file_len = ext4fs_open(filename); - if (file_len < 0) { - printf("** File not found %s **\n", filename); - ext4fs_close(); - return -1; - } - - if (len == 0) - len = file_len; - - len_read = ext4fs_read((char *)addr, len); - ext4fs_close(); - - if (len_read != len) { - printf("** Unable to read file %s **\n", filename); - return -1; - } - - return len_read; -} -#else -static inline int fs_probe_ext(void) +static inline int fs_read_unsupported(const char *filename, void *buf, + int offset, int len) { return -1; } -static inline void fs_close_ext(void) +static inline void fs_close_unsupported(void) { } -#define fs_ls_ext fs_ls_unsupported -#define fs_read_ext fs_read_unsupported -#endif - -static struct { +struct fstype_info { int fstype; - int (*probe)(void); -} fstypes[] = { + int (*probe)(block_dev_desc_t *fs_dev_desc, + disk_partition_t *fs_partition); + int (*ls)(const char *dirname); + int (*read)(const char *filename, void *buf, int offset, int len); + void (*close)(void); +}; + +static struct fstype_info fstypes[] = { +#ifdef CONFIG_FS_FAT { .fstype = FS_TYPE_FAT, - .probe = fs_probe_fat, + .probe = fat_set_blk_dev, + .close = fat_close, + .ls = file_fat_ls, + .read = fat_read_file, }, +#endif +#ifdef CONFIG_FS_EXT4 { .fstype = FS_TYPE_EXT, - .probe = fs_probe_ext, + .probe = ext4fs_probe, + .close = ext4fs_close, + .ls = ext4fs_ls, + .read = ext4_read_file, + }, +#endif +#ifdef CONFIG_SANDBOX + { + .fstype = FS_TYPE_SANDBOX, + .probe = sandbox_fs_set_blk_dev, + .close = sandbox_fs_close, + .ls = sandbox_fs_ls, + .read = fs_read_sandbox, + }, +#endif + { + .fstype = FS_TYPE_ANY, + .probe = fs_probe_unsupported, + .close = fs_close_unsupported, + .ls = fs_ls_unsupported, + .read = fs_read_unsupported, }, }; +static struct fstype_info *fs_get_info(int fstype) +{ + struct fstype_info *info; + int i; + + for (i = 0, info = fstypes; i < ARRAY_SIZE(fstypes) - 1; i++, info++) { + if (fstype == info->fstype) + return info; + } + + /* Return the 'unsupported' sentinel */ + return info; +} + int fs_set_blk_dev(const char *ifname, const char *dev_part_str, int fstype) { + struct fstype_info *info; int part, i; #ifdef CONFIG_NEEDS_MANUAL_RELOC static int relocated; if (!relocated) { - for (i = 0; i < ARRAY_SIZE(fstypes); i++) - fstypes[i].probe += gd->reloc_off; + for (i = 0, info = fstypes; i < ARRAY_SIZE(fstypes); + i++, info++) { + info->probe += gd->reloc_off; + info->close += gd->reloc_off; + info->ls += gd->reloc_off; + info->read += gd->reloc_off; + } relocated = 1; } #endif @@ -175,32 +135,25 @@ int fs_set_blk_dev(const char *ifname, const char *dev_part_str, int fstype) if (part < 0) return -1; - for (i = 0; i < ARRAY_SIZE(fstypes); i++) { - if ((fstype != FS_TYPE_ANY) && (fstype != fstypes[i].fstype)) + for (i = 0, info = fstypes; i < ARRAY_SIZE(fstypes); i++, info++) { + if (fstype != FS_TYPE_ANY && info->fstype != FS_TYPE_ANY && + fstype != info->fstype) continue; - if (!fstypes[i].probe()) { - fs_type = fstypes[i].fstype; + if (!info->probe(fs_dev_desc, &fs_partition)) { + fs_type = info->fstype; return 0; } } - printf("** Unrecognized filesystem type **\n"); return -1; } static void fs_close(void) { - switch (fs_type) { - case FS_TYPE_FAT: - fs_close_fat(); - break; - case FS_TYPE_EXT: - fs_close_ext(); - break; - default: - break; - } + struct fstype_info *info = fs_get_info(fs_type); + + info->close(); fs_type = FS_TYPE_ANY; } @@ -209,18 +162,11 @@ int fs_ls(const char *dirname) { int ret; - switch (fs_type) { - case FS_TYPE_FAT: - ret = fs_ls_fat(dirname); - break; - case FS_TYPE_EXT: - ret = fs_ls_ext(dirname); - break; - default: - ret = fs_ls_unsupported(dirname); - break; - } + struct fstype_info *info = fs_get_info(fs_type); + ret = info->ls(dirname); + + fs_type = FS_TYPE_ANY; fs_close(); return ret; @@ -228,20 +174,23 @@ int fs_ls(const char *dirname) int fs_read(const char *filename, ulong addr, int offset, int len) { + struct fstype_info *info = fs_get_info(fs_type); + void *buf; int ret; - switch (fs_type) { - case FS_TYPE_FAT: - ret = fs_read_fat(filename, addr, offset, len); - break; - case FS_TYPE_EXT: - ret = fs_read_ext(filename, addr, offset, len); - break; - default: - ret = fs_read_unsupported(filename, addr, offset, len); - break; - } + /* + * We don't actually know how many bytes are being read, since len==0 + * means read the whole file. + */ + buf = map_sysmem(addr, len); + ret = info->read(filename, buf, offset, len); + unmap_sysmem(buf); + /* If we requested a specific number of bytes, check we got it */ + if (ret >= 0 && len && ret != len) { + printf("** Unable to read file %s **\n", filename); + ret = -1; + } fs_close(); return ret; @@ -256,7 +205,6 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], unsigned long bytes; unsigned long pos; int len_read; - char buf[12]; unsigned long time; if (argc < 2) @@ -308,8 +256,7 @@ int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], } puts("\n"); - sprintf(buf, "0x%x", len_read); - setenv("filesize", buf); + setenv_hex("filesize", len_read); return 0; } diff --git a/fs/sandbox/Makefile b/fs/sandbox/Makefile new file mode 100644 index 0000000000..b3155b004c --- /dev/null +++ b/fs/sandbox/Makefile @@ -0,0 +1,47 @@ +# +# Copyright (c) 2012, Google Inc. +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2003 +# Pavel Bartusek, Sysgo Real-Time Solutions AG, pba@sysgo.de +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)libsandboxfs.o + +COBJS-$(CONFIG_SANDBOX) := sandboxfs.o + +SRCS := $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS-y)) + +all: $(LIB) $(AOBJS) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/fs/sandbox/sandboxfs.c b/fs/sandbox/sandboxfs.c new file mode 100644 index 0000000000..02d26ff851 --- /dev/null +++ b/fs/sandbox/sandboxfs.c @@ -0,0 +1,83 @@ +/* + * Copyright (c) 2012, Google Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <fs.h> +#include <os.h> + +int sandbox_fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info) +{ + return 0; +} + +long sandbox_fs_read_at(const char *filename, unsigned long pos, + void *buffer, unsigned long maxsize) +{ + ssize_t size; + int fd, ret; + + fd = os_open(filename, OS_O_RDONLY); + if (fd < 0) + return fd; + ret = os_lseek(fd, pos, OS_SEEK_SET); + if (ret == -1) { + os_close(fd); + return ret; + } + if (!maxsize) + maxsize = os_get_filesize(filename); + size = os_read(fd, buffer, maxsize); + os_close(fd); + + return size; +} + +int sandbox_fs_ls(const char *dirname) +{ + struct os_dirent_node *head, *node; + int ret; + + ret = os_dirent_ls(dirname, &head); + if (ret) + return ret; + + for (node = head; node; node = node->next) { + printf("%s %10lu %s\n", os_dirent_get_typename(node->type), + node->size, node->name); + } + + return 0; +} + +void sandbox_fs_close(void) +{ +} + +int fs_read_sandbox(const char *filename, void *buf, int offset, int len) +{ + int len_read; + + len_read = sandbox_fs_read_at(filename, offset, buf, len); + if (len_read == -1) { + printf("** Unable to read file %s **\n", filename); + return -1; + } + + return len_read; +} diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 30ccd98c22..9acf243eef 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -1164,10 +1164,9 @@ static struct file_system_type ubifs_fs_type = { .get_sb = ubifs_get_sb, }; -int ubifs_mount(char *vol_name) +int ubifs_mount(char *name) { int flags; - char name[80] = "ubi:"; void *data; struct vfsmount *mnt; int ret; @@ -1186,7 +1185,6 @@ int ubifs_mount(char *vol_name) * Mount in read-only mode */ flags = MS_RDONLY; - strcat(name, vol_name); data = NULL; mnt = NULL; ret = ubifs_get_sb(&ubifs_fs_type, flags, name, data, mnt); diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c index 44be3f53e0..273c0a9638 100644 --- a/fs/ubifs/ubifs.c +++ b/fs/ubifs/ubifs.c @@ -687,7 +687,6 @@ int ubifs_load(char *filename, u32 addr, u32 size) int i; int count; int last_block_size = 0; - char buf [10]; c->ubi = ubi_open_volume(c->vi.ubi_num, c->vi.vol_id, UBI_READONLY); /* ubifs_findfile will resolve symlinks, so we know that we get @@ -740,8 +739,7 @@ int ubifs_load(char *filename, u32 addr, u32 size) if (err) printf("Error reading file '%s'\n", filename); else { - sprintf(buf, "%X", size); - setenv("filesize", buf); + setenv_hex("filesize", size); printf("Done\n"); } diff --git a/helper.mk b/helper.mk deleted file mode 100644 index 79a1da01e3..0000000000 --- a/helper.mk +++ /dev/null @@ -1,64 +0,0 @@ -# -# Copyright (C) 2012 Marek Vasut <marex@denx.de> -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -######################################################################### - -## -# make_u_boot_list - Generate contents of u_boot_list section -# 1: The name of the resulting file (usually u-boot.lst) -# 2: Files to analyze for possible u_boot_list entries -# -# This function generates the contents of the u_boot_list section, -# including all the border symbols for it's subsections. The operation -# of this function is as follows, numbering goes per lines: -# -# 1) Dump the ELF header sections from all files supplied via $(2) -# 2) Filter out all other stuff that does not belong into .u_boot_list -# section. -# 3) Fix up the lines so that the resulting output is is in format -# ".u_boot_list.*". -# 4) Remove the last .something$, since that only contains the name -# of the variable to be put into a subsection. This name is irelevant -# for generation of border symbols, thus of no interest, remove it. -# 5) Take each line and for every dot "." in that line, print the whole -# line until that dot "." . This is important so that we have all -# parent border symbols generated as well. -# 6) Load every line and firstly append "\a" at the end and print the -# line. Next, append "@" at the end and print the line. Finally, -# append "~" at the end of line. This will make sense in conjunction -# with 6) and 7). -# 7) Sort the lines. It is imperative to use LC_COLLATE=C here because -# with this, the "\a" symbol is first and "~" symbol is last. Any -# other symbols fall inbetween. Symbols like "@", which marks the -# end of current line (representing current section) and ".", which -# means the line continues and thus represents subsection. -# 8) With such ordering, all lines ending with "\a" will float at the -# begining of all lines with the same prefix. Thus it is easy to -# replace "\a" with __start and make it the __start border symbol. -# Very similarly for "~", which will be always at the bottom and so -# can be replaced by "__end" and made into the __end border symbol. -# Finally, every line ending with "@" symbol will be transformed -# into " *(SORT(${line}*)); " format, which in the linker parlance -# will allow it to trap all symbols relevant to the subsection. -# -define make_u_boot_list -$(1): $(2) - $(OBJDUMP) -h $(2) | \ - sed -n -e '/.*\.u_boot_list[^ ]\+/ ! {d;n}' \ - -e 's/.*\(\.u_boot_list[^ ]\+\).*$$$$/\1/' \ - -e 's/\.[^\.]\+$$$$//' \ - -e ':s /^.\+$$$$/ { p;s/^\(.*\)\.[^\.]*$$$$/\1/;b s }' | \ - sed -n -e 'h;s/$$$$/\a/p;g;s/$$$$/@/p;g;s/$$$$/~/p;' | \ - LC_COLLATE=C sort -u | \ - sed -n -e '/\a$$$$/ { s/\./_/g;s/\a$$$$/__start = .;/p; }'\ - -e '/~$$$$/ { s/\./_/g;s/~$$$$/__end = .;/p; }'\ - -e '/@$$$$/ { s/\(.*\)@$$$$/*(SORT(\1.*));/p }' > $(1) -endef diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index b8ac024045..5416f468b0 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -40,7 +40,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long bus_clk; /* We cannot bracket this with CONFIG_PCI due to mpc5xxx */ @@ -81,6 +81,8 @@ typedef struct global_data { unsigned long reloc_off; struct global_data *new_gd; /* relocated global data */ const void *fdt_blob; /* Our device tree, NULL if none */ + void *new_fdt; /* Relocated FDT */ + unsigned long fdt_size; /* Space reserved for relocated FDT */ void **jt; /* jump table */ char env_buf[32]; /* buffer for getenv() before reloc. */ struct arch_global_data arch; /* architecture-specific data */ diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h new file mode 100644 index 0000000000..cca1edb0c7 --- /dev/null +++ b/include/asm-generic/sections.h @@ -0,0 +1,117 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* Taken from Linux kernel, commit f56c3196 */ + +#ifndef _ASM_GENERIC_SECTIONS_H_ +#define _ASM_GENERIC_SECTIONS_H_ + +/* References to section boundaries */ + +extern char _text[], _stext[], _etext[]; +extern char _data[], _sdata[], _edata[]; +extern char __bss_start[], __bss_stop[]; +extern char __init_begin[], __init_end[]; +extern char _sinittext[], _einittext[]; +extern char _end[]; +extern char __per_cpu_load[], __per_cpu_start[], __per_cpu_end[]; +extern char __kprobes_text_start[], __kprobes_text_end[]; +extern char __entry_text_start[], __entry_text_end[]; +extern char __initdata_begin[], __initdata_end[]; +extern char __start_rodata[], __end_rodata[]; + +/* Start and end of .ctors section - used for constructor calls. */ +extern char __ctors_start[], __ctors_end[]; + +/* function descriptor handling (if any). Override + * in asm/sections.h */ +#ifndef dereference_function_descriptor +#define dereference_function_descriptor(p) (p) +#endif + +/* random extra sections (if any). Override + * in asm/sections.h */ +#ifndef arch_is_kernel_text +static inline int arch_is_kernel_text(unsigned long addr) +{ + return 0; +} +#endif + +#ifndef arch_is_kernel_data +static inline int arch_is_kernel_data(unsigned long addr) +{ + return 0; +} +#endif + +/* U-Boot-specific things begin here */ + +/* Start of U-Boot text region */ +extern char __text_start[]; + +/* This marks the end of the text region which must be relocated */ +extern char __image_copy_end[]; + +/* + * This is the U-Boot entry point - prior to relocation it should be same + * as __text_start + */ +extern void _start(void); + +/* + * ARM needs to use offsets for symbols, since the values of some symbols + * are not resolved prior to relocation (and are just 0). Maybe this can be + * resolved, or maybe other architectures are similar, iwc this should be + * promoted to an architecture option. + */ +#ifdef CONFIG_ARM +#define CONFIG_SYS_SYM_OFFSETS +#endif + +#ifdef CONFIG_SYS_SYM_OFFSETS +/* Start/end of the relocation entries, as an offset from _start */ +extern ulong _rel_dyn_start_ofs; +extern ulong _rel_dyn_end_ofs; + +/* Start/end of the relocation symbol table, as an offset from _start */ +extern ulong _dynsym_start_ofs; + +/* End of the region to be relocated, as an offset form _start */ +extern ulong _image_copy_end_ofs; + +extern ulong _bss_start_ofs; /* BSS start relative to _start */ +extern ulong _bss_end_ofs; /* BSS end relative to _start */ +extern ulong _end_ofs; /* end of image relative to _start */ + +extern ulong _TEXT_BASE; /* code start */ + +#else /* don't use offsets: */ + +/* Exports from the Linker Script */ +extern ulong __data_end; +extern ulong __rel_dyn_start; +extern ulong __rel_dyn_end; +extern ulong __bss_end; + +extern ulong _TEXT_BASE; /* code start */ + +#endif + +#endif /* _ASM_GENERIC_SECTIONS_H_ */ diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h new file mode 100644 index 0000000000..a9aa8baf0d --- /dev/null +++ b/include/asm-generic/u-boot.h @@ -0,0 +1,162 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * + * (C) Copyright 2000 - 2002 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + ******************************************************************** + * NOTE: This header file defines an interface to U-Boot. Including + * this (unmodified) header file in another file is considered normal + * use of U-Boot, and does *not* fall under the heading of "derived + * work". + ******************************************************************** + */ + +#ifndef __ASM_GENERIC_U_BOOT_H__ +#define __ASM_GENERIC_U_BOOT_H__ + +/* + * Board information passed to Linux kernel from U-Boot + * + * include/asm-ppc/u-boot.h + */ + +#ifndef __ASSEMBLY__ + +typedef struct bd_info { + unsigned long bi_memstart; /* start of DRAM memory */ + phys_size_t bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ + unsigned long bi_sramstart; /* start of SRAM memory */ + unsigned long bi_sramsize; /* size of SRAM memory */ +#ifdef CONFIG_ARM + unsigned long bi_arm_freq; /* arm frequency */ + unsigned long bi_dsp_freq; /* dsp core frequency */ + unsigned long bi_ddr_freq; /* ddr frequency */ +#endif +#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_8260) \ + || defined(CONFIG_E500) || defined(CONFIG_MPC86xx) + unsigned long bi_immr_base; /* base of IMMR register */ +#endif +#if defined(CONFIG_MPC5xxx) + unsigned long bi_mbar_base; /* base of internal registers */ +#endif +#if defined(CONFIG_MPC83xx) + unsigned long bi_immrbar; +#endif +#if defined(CONFIG_MPC8220) + unsigned long bi_mbar_base; /* base of internal registers */ + unsigned long bi_inpfreq; /* Input Freq, In MHz */ + unsigned long bi_pcifreq; /* PCI Freq, in MHz */ + unsigned long bi_pevfreq; /* PEV Freq, in MHz */ + unsigned long bi_flbfreq; /* Flexbus Freq, in MHz */ + unsigned long bi_vcofreq; /* VCO Freq, in MHz */ +#endif + unsigned long bi_bootflags; /* boot / reboot flag (Unused) */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned char bi_enetaddr[6]; /* OLD: see README.enetaddr */ + unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ + unsigned long bi_intfreq; /* Internal Freq, in MHz */ + unsigned long bi_busfreq; /* Bus Freq, in MHz */ +#if defined(CONFIG_CPM2) + unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */ + unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */ + unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ + unsigned long bi_vco; /* VCO Out from PLL, in MHz */ +#endif +#if defined(CONFIG_MPC512X) + unsigned long bi_ipsfreq; /* IPS Bus Freq, in MHz */ +#endif /* CONFIG_MPC512X */ +#if defined(CONFIG_MPC5xxx) + unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ + unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ +#endif + unsigned int bi_baudrate; /* Console Baudrate */ +#if defined(CONFIG_405) || \ + defined(CONFIG_405GP) || \ + defined(CONFIG_405CR) || \ + defined(CONFIG_405EP) || \ + defined(CONFIG_405EZ) || \ + defined(CONFIG_405EX) || \ + defined(CONFIG_440) + unsigned char bi_s_version[4]; /* Version of this structure */ + unsigned char bi_r_version[32]; /* Version of the ROM (AMCC) */ + unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */ + unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */ + unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ + unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ +#endif +#if defined(CONFIG_HYMOD) + hymod_conf_t bi_hymod_conf; /* hymod configuration information */ +#endif + +#ifdef CONFIG_HAS_ETH1 + unsigned char bi_enet1addr[6]; /* OLD: see README.enetaddr */ +#endif +#ifdef CONFIG_HAS_ETH2 + unsigned char bi_enet2addr[6]; /* OLD: see README.enetaddr */ +#endif +#ifdef CONFIG_HAS_ETH3 + unsigned char bi_enet3addr[6]; /* OLD: see README.enetaddr */ +#endif +#ifdef CONFIG_HAS_ETH4 + unsigned char bi_enet4addr[6]; /* OLD: see README.enetaddr */ +#endif +#ifdef CONFIG_HAS_ETH5 + unsigned char bi_enet5addr[6]; /* OLD: see README.enetaddr */ +#endif + +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \ + defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) + unsigned int bi_opbfreq; /* OPB clock in Hz */ + int bi_iic_fast[2]; /* Use fast i2c mode */ +#endif +#if defined(CONFIG_NX823) + unsigned char bi_sernum[8]; +#endif +#if defined(CONFIG_4xx) +#if defined(CONFIG_440GX) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) + int bi_phynum[4]; /* Determines phy mapping */ + int bi_phymode[4]; /* Determines phy mode */ +#elif defined(CONFIG_405EP) || defined(CONFIG_405EX) || defined(CONFIG_440) + int bi_phynum[2]; /* Determines phy mapping */ + int bi_phymode[2]; /* Determines phy mode */ +#else + int bi_phynum[1]; /* Determines phy mapping */ + int bi_phymode[1]; /* Determines phy mode */ +#endif +#endif /* defined(CONFIG_4xx) */ + ulong bi_arch_number; /* unique id for this board */ + ulong bi_boot_params; /* where this board expects params */ +#ifdef CONFIG_NR_DRAM_BANKS + struct { /* RAM configuration */ + ulong start; + ulong size; + } bi_dram[CONFIG_NR_DRAM_BANKS]; +#endif /* CONFIG_NR_DRAM_BANKS */ +} bd_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_GENERIC_U_BOOT_H__ */ diff --git a/include/command.h b/include/command.h index 3785eb987f..65692fd2a6 100644 --- a/include/command.h +++ b/include/command.h @@ -175,7 +175,7 @@ int cmd_process(int flag, int argc, char * const argv[], _usage, _help, NULL) #define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \ - ll_entry_declare(cmd_tbl_t, _name, cmd, cmd) = \ + ll_entry_declare(cmd_tbl_t, _name, cmd) = \ U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ _usage, _help, _comp); diff --git a/include/common.h b/include/common.h index 4ad17eafb9..d41aeb4f47 100644 --- a/include/common.h +++ b/include/common.h @@ -270,7 +270,8 @@ int cpu_init(void); phys_size_t initdram (int); int display_options (void); void print_size(unsigned long long, const char *); -int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen); +int print_buffer(ulong addr, const void *data, uint width, uint count, + uint linelen); /* common/main.c */ void main_loop (void); @@ -310,6 +311,8 @@ extern ulong monitor_flash_len; int mac_read_from_eeprom(void); extern u8 _binary_dt_dtb_start[]; /* embedded device tree blob */ int set_cpu_clk_info(void); +int print_cpuinfo(void); +int update_flash_size(int flash_size); /** * Show the DRAM size in a board-specific way @@ -357,7 +360,19 @@ int getenv_yesno(const char *var); int saveenv (void); int setenv (const char *, const char *); int setenv_ulong(const char *varname, ulong value); -int setenv_addr(const char *varname, const void *addr); +int setenv_hex(const char *varname, ulong value); +/** + * setenv_addr - Set an environment variable to an address in hex + * + * @varname: Environmet variable to set + * @addr: Value to set it to + * @return 0 if ok, 1 on error + */ +static inline int setenv_addr(const char *varname, const void *addr) +{ + return setenv_hex(varname, (ulong)addr); +} + #ifdef CONFIG_ARM # include <asm/mach-types.h> # include <asm/setup.h> @@ -869,6 +884,18 @@ int cpu_disable(int nr); int cpu_release(int nr, int argc, char * const argv[]); #endif +/* Define a null map_sysmem() if the architecture doesn't use it */ +# ifndef CONFIG_ARCH_MAP_SYSMEM +static inline void *map_sysmem(phys_addr_t paddr, unsigned long len) +{ + return (void *)(uintptr_t)paddr; +} + +static inline void unmap_sysmem(const void *vaddr) +{ +} +# endif + #endif /* __ASSEMBLY__ */ #ifdef CONFIG_PPC diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index 2a82e19c78..53a2f054f9 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -57,7 +57,8 @@ #define CONFIG_CMD_LOADB /* loadb */ #define CONFIG_CMD_LOADS /* loads */ #define CONFIG_CMD_MEMINFO /* meminfo */ -#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ +#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop */ +#define CONFIG_CMD_MEMTEST /* mtest */ #define CONFIG_CMD_MFSL /* FSL support for Microblaze */ #define CONFIG_CMD_MII /* MII support */ #define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ @@ -76,6 +77,7 @@ #define CONFIG_CMD_RARP /* rarpboot support */ #define CONFIG_CMD_READ /* Read data from partition */ #define CONFIG_CMD_RUN /* run command in env variable */ +#define CONFIG_CMD_SANDBOX /* sb command to access sandbox features */ #define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_SAVES /* save S record dump */ #define CONFIG_CMD_SCSI /* SCSI Support */ diff --git a/include/config_cmd_default.h b/include/config_cmd_default.h index 6e3903c4d4..a52110396b 100644 --- a/include/config_cmd_default.h +++ b/include/config_cmd_default.h @@ -30,7 +30,8 @@ #endif #define CONFIG_CMD_LOADB /* loadb */ #define CONFIG_CMD_LOADS /* loads */ -#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ +#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop */ +#define CONFIG_CMD_MEMTEST /* mtest */ #define CONFIG_CMD_MISC /* Misc functions like sleep etc*/ #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #define CONFIG_CMD_NFS /* NFS support */ diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index bfb9680d68..9298d0ee97 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -26,4 +26,15 @@ #define CONFIG_EXT4_WRITE #endif +/* Rather than repeat this expression each time, add a define for it */ +#if defined(CONFIG_CMD_IDE) || \ + defined(CONFIG_CMD_SATA) || \ + defined(CONFIG_CMD_SCSI) || \ + defined(CONFIG_CMD_USB) || \ + defined(CONFIG_CMD_PART) || \ + defined(CONFIG_MMC) || \ + defined(CONFIG_SYSTEMACE) +#define HAVE_BLOCK_DEVICE +#endif + #endif /* __CONFIG_FALLBACKS_H */ diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h deleted file mode 100644 index 90cee881ae..0000000000 --- a/include/configs/PCIPPC2.h +++ /dev/null @@ -1,251 +0,0 @@ -/* - * (C) Copyright 2002-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * - * Configuration settings for the PCIPPC-2 board. - * - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_PCIPPC2 1 /* this is a PCIPPC2 board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_MISC_INIT_R 1 - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_PREBOOT "" -#define CONFIG_BOOTDELAY 5 - -#ifndef __ASSEMBLY__ -#include <galileo/core.h> -#endif - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BSP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SNTP - -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ - -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size - */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -#define CONFIG_SYS_MAXARGS 64 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFF00000 -#define CONFIG_SYS_FLASH_MAX_SIZE 0x00100000 -/* Maximum amount of RAM. - */ -#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 /* 512Mb */ - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_SDRAM_BASE && \ - CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_INIT_RAM_LOCK - -/* - * Temporary buffer for serial data until the real serial driver - * is initialised (memtest will destroy this buffer) - */ -#define CONFIG_SYS_SCONSOLE_ADDR CONFIG_SYS_INIT_RAM_ADDR -#define CONFIG_SYS_SCONSOLE_SIZE 0x0002000 - -/* SDRAM 0 - 256MB - */ -#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT0U (CONFIG_SYS_SDRAM_BASE | \ - BATU_BL_256M | BATU_VS | BATU_VP) -/* SDRAM 1 - 256MB - */ -#define CONFIG_SYS_DBAT1L ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \ - BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT1U ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \ - BATU_BL_256M | BATU_VS | BATU_VP) - -/* Init RAM in the CPU DCache (no backing memory) - */ -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_INIT_RAM_ADDR | \ - BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_INIT_RAM_ADDR | \ - BATU_BL_128K | BATU_VS | BATU_VP) - -/* I/O and PCI memory at 0xf0000000 - */ -#define CONFIG_SYS_DBAT3L (0xf0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_DBAT3U (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT0L CONFIG_SYS_DBAT0L -#define CONFIG_SYS_IBAT0U CONFIG_SYS_DBAT0U -#define CONFIG_SYS_IBAT1L CONFIG_SYS_DBAT1L -#define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U -#define CONFIG_SYS_IBAT2L CONFIG_SYS_DBAT2L -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U -#define CONFIG_SYS_IBAT3L CONFIG_SYS_DBAT3L -#define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - * For the detail description refer to the PCIPPC2 user's manual. - */ -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_BUS_CLK 100000000 /* bus speed - 100 mhz */ -#define CONFIG_SYS_CPU_CLK 300000000 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 16 /* Max number of sectors in one bank */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ - -/* - * Note: environment is not EMBEDDED in the U-Boot code. - * It's stored in flash separately. - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x70000) -#define CONFIG_ENV_SIZE 0x1000 /* Size of the Environment */ -#define CONFIG_ENV_SECT_SIZE 0x10000 /* Size of the Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * L2 cache - */ -#undef CONFIG_SYS_L2 -#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ - L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) -#define L2_ENABLE (L2_INIT | L2CR_L2E) - -/*----------------------------------------------------------------------- - RTC m48t59 -*/ -#define CONFIG_RTC_MK48T59 - -#define CONFIG_WATCHDOG - - -#define CONFIG_EEPRO100 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define CONFIG_TULIP - -#endif /* __CONFIG_H */ diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h deleted file mode 100644 index 10b81c1a7f..0000000000 --- a/include/configs/PCIPPC6.h +++ /dev/null @@ -1,265 +0,0 @@ -/* - * (C) Copyright 2002-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * - * Configuration settings for the PCIPPC-6 board. - * - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_PCIPPC2 1 /* this is a PCIPPC2 board */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_MISC_INIT_R 1 - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_PREBOOT "" -#define CONFIG_BOOTDELAY 5 - -#ifndef __ASSEMBLY__ -#include <galileo/core.h> -#endif - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BSP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_SCSI -#define CONFIG_CMD_SNTP - - -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ - -#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size - */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -#define CONFIG_SYS_MAXARGS 64 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFF00000 -#define CONFIG_SYS_FLASH_MAX_SIZE 0x00100000 -/* Maximum amount of RAM. - */ -#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 /* 512Mb */ - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_SDRAM_BASE && \ - CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MAX_RAM_SIZE -#define CONFIG_SYS_RAMBOOT -#else -#undef CONFIG_SYS_RAMBOOT -#endif - -#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ - -#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_INIT_RAM_LOCK - -/* - * Temporary buffer for serial data until the real serial driver - * is initialised (memtest will destroy this buffer) - */ -#define CONFIG_SYS_SCONSOLE_ADDR CONFIG_SYS_INIT_RAM_ADDR -#define CONFIG_SYS_SCONSOLE_SIZE 0x0002000 - -/* SDRAM 0 - 256MB - */ -#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT0U (CONFIG_SYS_SDRAM_BASE | \ - BATU_BL_256M | BATU_VS | BATU_VP) -/* SDRAM 1 - 256MB - */ -#define CONFIG_SYS_DBAT1L ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \ - BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT1U ((CONFIG_SYS_SDRAM_BASE + 0x10000000) | \ - BATU_BL_256M | BATU_VS | BATU_VP) - -/* Init RAM in the CPU DCache (no backing memory) - */ -#define CONFIG_SYS_DBAT2L (CONFIG_SYS_INIT_RAM_ADDR | \ - BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_DBAT2U (CONFIG_SYS_INIT_RAM_ADDR | \ - BATU_BL_128K | BATU_VS | BATU_VP) - -/* I/O and PCI memory at 0xf0000000 - */ -#define CONFIG_SYS_DBAT3L (0xf0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_DBAT3U (0xf0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT0L CONFIG_SYS_DBAT0L -#define CONFIG_SYS_IBAT0U CONFIG_SYS_DBAT0U -#define CONFIG_SYS_IBAT1L CONFIG_SYS_DBAT1L -#define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U -#define CONFIG_SYS_IBAT2L CONFIG_SYS_DBAT2L -#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U -#define CONFIG_SYS_IBAT3L CONFIG_SYS_DBAT3L -#define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - * For the detail description refer to the PCIPPC2 user's manual. - */ -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_BUS_CLK 100000000 /* bus speed - 100 mhz */ -#define CONFIG_SYS_CPU_CLK 300000000 - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 16 /* Max number of sectors in one bank */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ - -/* - * Note: environment is not EMBEDDED in the U-Boot code. - * It's stored in flash separately. - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x70000) -#define CONFIG_ENV_SIZE 0x1000 /* Size of the Environment */ -#define CONFIG_ENV_SECT_SIZE 0x10000 /* Size of the Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * L2 cache - */ -#undef CONFIG_SYS_L2 -#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ - L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) -#define L2_ENABLE (L2_INIT | L2CR_L2E) - -/*----------------------------------------------------------------------- - RTC m48t59 -*/ -#define CONFIG_RTC_MK48T59 - -#define CONFIG_WATCHDOG - - -#define CONFIG_EEPRO100 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define CONFIG_TULIP - - -#define CONFIG_SCSI_SYM53C8XX -#define CONFIG_SCSI_DEV_ID 0x000B /* 53c896 */ -#define CONFIG_SYS_SCSI_MAX_LUN 8 /* number of supported LUNs */ -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 15 /* maximum SCSI ID (0..6) */ -#define CONFIG_SYS_SCSI_MAX_DEVICE CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN /* maximum Target devices */ -#define CONFIG_SYS_SCSI_SPIN_UP_TIME 2 -#define CONFIG_SYS_SCSI_SCAN_BUS_REVERSE 0 -#define CONFIG_DOS_PARTITION -#define CONFIG_MAC_PARTITION -#define CONFIG_ISO_PARTITION - -#endif /* __CONFIG_H */ diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h index df3b4ae90a..13f32267e9 100644 --- a/include/configs/a3m071.h +++ b/include/configs/a3m071.h @@ -26,15 +26,22 @@ #define CONFIG_MPC5200 #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ #define CONFIG_A3M071 /* ... on A3M071 board */ -#define CONFIG_MPC5200_DDR /* ... use DDR RAM */ #define CONFIG_SYS_TEXT_BASE 0x01000000 /* boot low for 32 MiB boards */ +#define CONFIG_SPL_TARGET "u-boot-img.bin" + #define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ #define CONFIG_MISC_INIT_R #define CONFIG_SYS_LOWBOOT /* Enable lowboot */ +#ifdef CONFIG_A4M2K +#define CONFIG_HOSTNAME a4m2k +#else +#define CONFIG_HOSTNAME a3m071 +#endif + /* * Serial console configuration */ @@ -50,9 +57,6 @@ #define CONFIG_CMD_BSP #define CONFIG_CMD_CACHE -#define CONFIG_CMD_DATE -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_I2C #define CONFIG_CMD_MII #define CONFIG_CMD_REGINFO @@ -61,7 +65,11 @@ */ #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ /* define for 66MHz speed - undef for 33MHz PCI clock speed */ +#ifdef CONFIG_A4M2K +#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 +#else #undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 +#endif /* pass open firmware flat tree */ #define CONFIG_OF_LIBFDT @@ -76,33 +84,10 @@ #define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" /* - * I2C configuration - */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ - -#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* - * RTC configuration - */ -#define CONFIG_RTC_PCF8563 -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 - -/* * NOR flash configuration */ #define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 +#define CONFIG_SYS_FLASH_SIZE 0x02000000 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) #define CONFIG_SYS_MAX_FLASH_BANKS 1 @@ -153,7 +138,11 @@ */ #define CONFIG_MPC5xxx_FEC #define CONFIG_MPC5xxx_FEC_MII100 +#ifdef CONFIG_A4M2K +#define CONFIG_PHY_ADDR 0x01 +#else #define CONFIG_PHY_ADDR 0x00 +#endif /* * GPIO configuration @@ -166,19 +155,28 @@ * 2 means fpga ok */ +#ifdef CONFIG_A4M2K +#define CONFIG_SYS_GPS_PORT_CONFIG 0x0005C805 +#else /* for failsave-level 0 - full failsave */ #define CONFIG_SYS_GPS_PORT_CONFIG 0x1005C005 /* for failsave-level 1 - only digiboard ok */ #define CONFIG_SYS_GPS_PORT_CONFIG_1 0x1005C005 /* for failsave-level 2 - all ok */ #define CONFIG_SYS_GPS_PORT_CONFIG_2 0x1005C005 +#endif + +#define CONFIG_WDOG_GPIO_PIN GPIO_WKUP_7 +#if defined(CONFIG_A4M2K) && !defined(CONFIG_SPL_BUILD) +#define CONFIG_HW_WATCHDOG /* Use external HW-Watchdog */ +#endif /* * Configuration matrix * MSB LSB - * failsave 0 0x1005C005 00010000000001011100000001100101 ( full failsave ) - * failsave 1 0x1005C005 00010000000001011100000001100101 ( digib.-ver ok ) - * failsave 2 0x1005C005 00010000000001011100000001100101 ( all ok ) + * failsave 0 0x1005C005 00010000000001011100000000000101 ( full failsave ) + * failsave 1 0x1005C005 00010000000001011100000000000101 ( digib.-ver ok ) + * failsave 2 0x1005C005 00010000000001011100000000000101 ( all ok ) * || ||| || | ||| | | | | * || ||| || | ||| | | | | bit rev name * ++-+++-++--+---+++-+---+---+---+- 0 31 CS1 @@ -254,30 +252,47 @@ #define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE #define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE #define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE + +#ifdef CONFIG_A4M2K +/* external MRAM */ +#define CONFIG_SYS_CS1_START 0xf1000000 +#define CONFIG_SYS_CS1_SIZE (512 << 10) /* 512KiB MRAM */ +#endif + #define CONFIG_SYS_CS2_START 0xe0000000 #define CONFIG_SYS_CS2_SIZE 0x00100000 -/* FPGA slave io (512kiB) - see ticket #66 */ +/* FPGA slave io (512kiB / 1MiB) - see ticket #66 */ #define CONFIG_SYS_CS3_START 0xE9000000 +#ifdef CONFIG_A4M2K +#define CONFIG_SYS_CS3_SIZE 0x00100000 +#else #define CONFIG_SYS_CS3_SIZE 0x00080000 +#endif /* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0032B900 */ #define CONFIG_SYS_CS3_CFG 0x0032B900 +#ifndef CONFIG_A4M2K /* Diagnosis Interface - see ticket #63 */ #define CONFIG_SYS_CS4_START 0xEA000000 #define CONFIG_SYS_CS4_SIZE 0x00000001 /* 00000000 00000010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0002B900 */ #define CONFIG_SYS_CS4_CFG 0x0002B900 +#endif -/* FPGA master io (64kiB) - see ticket #66 */ +/* FPGA master io (64kiB / 1MiB) - see ticket #66 */ #define CONFIG_SYS_CS5_START 0xE8000000 +#ifdef CONFIG_A4M2K +#define CONFIG_SYS_CS5_SIZE 0x00100000 +#else #define CONFIG_SYS_CS5_SIZE 0x00010000 +#endif /* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0032B900 */ #define CONFIG_SYS_CS5_CFG 0x0032B900 #ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* for pci_clk = 66 MHz */ #define CONFIG_SYS_BOOTCS_CFG 0x0006F900 -#define CONFIG_SYS_CS1_CFG 0x0004FB00 +#define CONFIG_SYS_CS1_CFG 0x0008FD00 #define CONFIG_SYS_CS2_CFG 0x0006F90C #else /* for pci_clk = 33 MHz */ #define CONFIG_SYS_BOOTCS_CFG 0x0002F900 @@ -311,17 +326,25 @@ #define CONFIG_SYS_OS_BASE 0xfc080000 #define CONFIG_SYS_FDT_BASE 0xfc060000 -#define xstr(s) str(s) -#define str(s) #s - #define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ "netdev=eth0\0" \ "verify=no\0" \ + "loadaddr=200000\0" \ + "kernel_addr=" __stringify(CONFIG_SYS_OS_BASE) "\0" \ + "kernel_addr_r=1000000\0" \ + "fdt_addr=" __stringify(CONFIG_SYS_FDT_BASE) "\0" \ + "fdt_addr_r=1800000\0" \ + "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ + "fdtfile=" __stringify(CONFIG_HOSTNAME) "/" \ + __stringify(CONFIG_HOSTNAME) ".dtb\0" \ + "rootpath=/opt/eldk-5.2.1/powerpc/" \ + "core-image-minimal-mtdutils-dropbear-generic\0" \ "consoledev=ttyPSC0\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ "nfsroot=${serverip}:${rootpath}\0" \ "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "mtdargs=setenv bootargs root=/dev/mtdblock4 rw rootfstype=jffs2\0"\ + "mtdargs=setenv bootargs root=/dev/mtdblock4 rw rootfstype=jffs2\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ ":${hostname}:${netdev}:off panic=1\0" \ @@ -332,18 +355,18 @@ "flash_mtd=run mtdargs addip addtty;" \ "bootm ${kernel_addr} - ${fdtaddr}\0" \ "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdtaddr}\0" \ - "net_nfs=sleep 2; tftp ${loadaddr} ${bootfile};" \ - "tftp c00000 ${fdtfile};" \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ + "tftp ${fdt_addr_r} ${fdtfile};" \ "run nfsargs addip addtty;" \ - "bootm ${loadaddr} - c00000\0" \ - "load=tftp ${loadaddr} u-boot.bin\0" \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "load=tftp ${loadaddr} " __stringify(CONFIG_HOSTNAME) \ + "/u-boot-img.bin\0" \ "update=protect off fc000000 fc03ffff; " \ - "era fc000000 fc03ffff; cp.b ${loadaddr} fc000000 40000\0"\ + "era fc000000 fc03ffff; cp.b ${loadaddr} fc000000 40000\0" \ "upd=run load;run update\0" \ - "fdtaddr=" xstr(CONFIG_SYS_FDT_BASE) "\0" \ - "fdtfile=dtbFile\0" \ - "kernel_addr=" xstr(CONFIG_SYS_OS_BASE) "\0" \ + "bootdelay=3\0" \ + "bootcmd=run net_nfs\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_mtd" @@ -353,6 +376,7 @@ */ #define CONFIG_SPL #define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NOR_SUPPORT #define CONFIG_SPL_TEXT_BASE 0xfc000000 #define CONFIG_SPL_START_S_PATH "arch/powerpc/cpu/mpc5xxx" diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h new file mode 100644 index 0000000000..ac7e877388 --- /dev/null +++ b/include/configs/ac14xx.h @@ -0,0 +1,591 @@ +/* + * (C) Copyright 2009 Wolfgang Denk <wd@denx.de> + * (C) Copyright 2010 DAVE Srl <www.dave.eu> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * ifm AC14xx (MPC5121e based) board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_AC14XX 1 +/* + * Memory map for the ifm AC14xx board: + * + * 0x0000_0000-0x0FFF_FFFF DDR RAM (256 MB) + * 0x3000_0000-0x3001_FFFF On Chip SRAM (128 KB) + * 0x8000_0000-0x803F_FFFF IMMR (4 MB) + * 0xE000_0000-0xEFFF_FFFF several LPB attached hardware (CSx) + * 0xFC00_0000-0xFFFF_FFFF NOR Boot FLASH (64 MB) + */ + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 Family */ +#define CONFIG_MPC512X 1 /* MPC512X family */ + +#define CONFIG_SYS_TEXT_BASE 0xFFF00000 + +#if defined(CONFIG_VIDEO) +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#endif + +#define CONFIG_SYS_MPC512X_CLKIN 25000000 /* in Hz */ +#define SCFR1_IPS_DIV 2 +#define SCFR1_LPC_DIV 2 +#define SCFR1_NFC_DIV 2 +#define SCFR1_DIU_DIV 240 + +#define CONFIG_MISC_INIT_R + +#define CONFIG_SYS_IMMR 0x80000000 +#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR + 0x2100) + +/* more aggressive 'mtest' over a wider address range */ +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest region */ +#define CONFIG_SYS_MEMTEST_END 0x0FE00000 + +/* + * DDR Setup - manually set all parameters as there's no SPD etc. + */ +#define CONFIG_SYS_DDR_SIZE 256 /* MB */ +#define CONFIG_SYS_DDR_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE +#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 + +/* + * DDR Controller Configuration XXX TODO + * + * SYS_CFG: + * [31:31] MDDRC Soft Reset: Diabled + * [30:30] DRAM CKE pin: Enabled + * [29:29] DRAM CLK: Enabled + * [28:28] Command Mode: Enabled (For initialization only) + * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] + * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] + * [20:19] Read Test: DON'T USE + * [18:18] Self Refresh: Enabled + * [17:17] 16bit Mode: Disabled + * [16:13] Ready Delay: 2 + * [12:12] Half DQS Delay: Disabled + * [11:11] Quarter DQS Delay: Disabled + * [10:08] Write Delay: 2 + * [07:07] Early ODT: Disabled + * [06:06] On DIE Termination: Disabled + * [05:05] FIFO Overflow Clear: DON'T USE here + * [04:04] FIFO Underflow Clear: DON'T USE here + * [03:03] FIFO Overflow Pending: DON'T USE here + * [02:02] FIFO Underlfow Pending: DON'T USE here + * [01:01] FIFO Overlfow Enabled: Enabled + * [00:00] FIFO Underflow Enabled: Enabled + * TIME_CFG0 + * [31:16] DRAM Refresh Time: 0 CSB clocks + * [15:8] DRAM Command Time: 0 CSB clocks + * [07:00] DRAM Precharge Time: 0 CSB clocks + * TIME_CFG1 + * [31:26] DRAM tRFC: + * [25:21] DRAM tWR1: + * [20:17] DRAM tWRT1: + * [16:11] DRAM tDRR: + * [10:05] DRAM tRC: + * [04:00] DRAM tRAS: + * TIME_CFG2 + * [31:28] DRAM tRCD: + * [27:23] DRAM tFAW: + * [22:19] DRAM tRTW1: + * [18:15] DRAM tCCD: + * [14:10] DRAM tRTP: + * [09:05] DRAM tRP: + * [04:00] DRAM tRPA + */ + +/* + * NOTE: although this board uses DDR1 only, the common source brings defaults + * for DDR2 init sequences, that's why we have to keep those here as well + */ + +/* DDR1 -- 32bit, drive strength (pad configuration) 3 for control and data */ +#define CONFIG_SYS_IOCTRL_MUX_DDR ((0 << 6) | (3 << 3) | (3 << 0)) + +#define CONFIG_SYS_MDDRC_SYS_CFG (/* 0xEAA09100 */ 0 \ + | (1 << 31) /* RST_B */ \ + | (1 << 30) /* CKE */ \ + | (1 << 29) /* CLK_ON */ \ + | (0 << 28) /* CMD_MODE */ \ + | (5 << 25) /* DRAM_ROW_SELECT */ \ + | (5 << 21) /* DRAM_BANK_SELECT */ \ + | (0 << 18) /* SELF_REF_EN */ \ + | (0 << 17) /* 16BIT_MODE */ \ + | (4 << 13) /* RDLY */ \ + | (1 << 12) /* HALF_DQS_DLY */ \ + | (0 << 11) /* QUART_DQS_DLY */ \ + | (1 << 8) /* WDLY */ \ + | (0 << 7) /* EARLY_ODT */ \ + | (0 << 6) /* ON_DIE_TERMINATE */ \ + | (0 << 5) /* FIFO_OV_CLEAR */ \ + | (0 << 4) /* FIFO_UV_CLEAR */ \ + | (0 << 1) /* FIFO_OV_EN */ \ + | (0 << 0) /* FIFO_UV_EN */ \ + ) + +#define CONFIG_SYS_MDDRC_TIME_CFG0 0x04E03124 +#define CONFIG_SYS_MDDRC_TIME_CFG1 0x30CA1147 +#define CONFIG_SYS_MDDRC_TIME_CFG2 0x32B10864 + +/* register address only, i.e. template without values */ +#define CONFIG_SYS_MICRON_BMODE 0x01000000 +#define CONFIG_SYS_MICRON_EMODE 0x01010000 +#define CONFIG_SYS_MICRON_EMODE2 0x01020000 +#define CONFIG_SYS_MICRON_EMODE3 0x01030000 +/* + * values for mode registers (without mode register address) + */ +/* CAS 2.5 (6), burst seq (0) and length 4 (2) */ +#define CONFIG_SYS_MICRON_BMODE_PARAM 0x00000062 +#define CONFIG_SYS_MICRON_BMODE_RSTDLL 0x00000100 +/* DLL enable, reduced drive strength */ +#define CONFIG_SYS_MICRON_EMODE_PARAM 0x00000002 + +#define CONFIG_SYS_DDRCMD_NOP 0x01380000 +#define CONFIG_SYS_DDRCMD_PCHG_ALL 0x01100400 +#define CONFIG_SYS_MICRON_EMR ((1 << 24) | /* CMD_REQ */ \ + (0 << 22) | /* DRAM_CS */ \ + (0 << 21) | /* DRAM_RAS */ \ + (0 << 20) | /* DRAM_CAS */ \ + (0 << 19) | /* DRAM_WEB */ \ + (1 << 16) | /* DRAM_BS[2:0] */ \ + (0 << 15) | /* */ \ + (0 << 12) | /* A12->out */ \ + (0 << 11) | /* A11->RDQS */ \ + (0 << 10) | /* A10->DQS# */ \ + (0 << 7) | /* OCD program */ \ + (0 << 6) | /* Rtt1 */ \ + (0 << 3) | /* posted CAS# */ \ + (0 << 2) | /* Rtt0 */ \ + (1 << 1) | /* ODS */ \ + (0 << 0) /* DLL */ \ + ) +#define CONFIG_SYS_MICRON_EMR2 0x01020000 +#define CONFIG_SYS_MICRON_EMR3 0x01030000 +#define CONFIG_SYS_DDRCMD_RFSH 0x01080000 +#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432 +#define CONFIG_SYS_MICRON_EMR_OCD ((1 << 24) | /* CMD_REQ */ \ + (0 << 22) | /* DRAM_CS */ \ + (0 << 21) | /* DRAM_RAS */ \ + (0 << 20) | /* DRAM_CAS */ \ + (0 << 19) | /* DRAM_WEB */ \ + (1 << 16) | /* DRAM_BS[2:0] */ \ + (0 << 15) | /* */ \ + (0 << 12) | /* A12->out */ \ + (0 << 11) | /* A11->RDQS */ \ + (1 << 10) | /* A10->DQS# */ \ + (7 << 7) | /* OCD program */ \ + (0 << 6) | /* Rtt1 */ \ + (0 << 3) | /* posted CAS# */ \ + (1 << 2) | /* Rtt0 */ \ + (0 << 1) | /* ODS */ \ + (0 << 0) /* DLL */ \ + ) + +/* + * Backward compatible definitions, + * so we do not have to change arch/powerpc/cpu/mpc512x/fixed_sdram.c + */ +#define CONFIG_SYS_DDRCMD_EM2 (CONFIG_SYS_MICRON_EMR2) +#define CONFIG_SYS_DDRCMD_EM3 (CONFIG_SYS_MICRON_EMR3) +#define CONFIG_SYS_DDRCMD_EN_DLL (CONFIG_SYS_MICRON_EMR) +#define CONFIG_SYS_DDRCMD_OCD_DEFAULT (CONFIG_SYS_MICRON_EMR_OCD) + +/* DDR Priority Manager Configuration */ +#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 +#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000 +#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001 +#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC +#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA +#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666 +#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555 +#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444 +#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444 +#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555 +#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558 +#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122 +#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa +#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa +#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666 +#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666 +#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111 + +/* + * NOR FLASH on the Local Bus + */ +#define CONFIG_SYS_FLASH_CFI /* use the CFI code */ +#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ +#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* start of FLASH */ +#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* max flash size */ + +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_FLASH_BANKS_LIST { \ + CONFIG_SYS_FLASH_BASE + 0 * CONFIG_SYS_FLASH_SIZE, \ + } +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors per device */ + +#undef CONFIG_SYS_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_PROTECTION + +/* + * SRAM support + */ +#define CONFIG_SYS_SRAM_BASE 0x30000000 +#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ + +/* + * CS related parameters + * TODO document these + */ +/* CS0 Flash */ +#define CONFIG_SYS_CS0_CFG 0x00031110 +#define CONFIG_SYS_CS0_START 0xFC000000 +#define CONFIG_SYS_CS0_SIZE 0x04000000 +/* CS1 FRAM */ +#define CONFIG_SYS_CS1_CFG 0x00011000 +#define CONFIG_SYS_CS1_START 0xE0000000 +#define CONFIG_SYS_CS1_SIZE 0x00010000 +/* CS2 AS-i 1 */ +#define CONFIG_SYS_CS2_CFG 0x00009100 +#define CONFIG_SYS_CS2_START 0xE0100000 +#define CONFIG_SYS_CS2_SIZE 0x00080000 +/* CS3 netX */ +#define CONFIG_SYS_CS3_CFG 0x000A1140 +#define CONFIG_SYS_CS3_START 0xE0300000 +#define CONFIG_SYS_CS3_SIZE 0x00020000 +/* CS5 safety */ +#define CONFIG_SYS_CS5_CFG 0x0011F000 +#define CONFIG_SYS_CS5_START 0xE0400000 +#define CONFIG_SYS_CS5_SIZE 0x00010000 +/* CS6 AS-i 2 */ +#define CONFIG_SYS_CS6_CFG 0x00009100 +#define CONFIG_SYS_CS6_START 0xE0200000 +#define CONFIG_SYS_CS6_SIZE 0x00080000 + +/* Don't use alternative CS timing for any CS */ +#define CONFIG_SYS_CS_ALETIMING 0x00000000 +#define CONFIG_SYS_CS_BURST 0x00000000 +#define CONFIG_SYS_CS_DEADCYCLE 0x00000020 +#define CONFIG_SYS_CS_HOLDCYCLE 0x00000020 + +/* Use SRAM for initial stack */ +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE +#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_SRAM_SIZE + +#define CONFIG_SYS_GBL_DATA_SIZE 0x100 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) + +#ifdef CONFIG_FSL_DIU_FB +#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) +#else +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) +#endif + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 3 /* console on PSC3 */ +#define CONFIG_SYS_PSC3 +#if CONFIG_PSC_CONSOLE != 3 +#error CONFIG_PSC_CONSOLE must be 3 +#endif + +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} + +#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE +#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR +#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE +#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR + +/* + * Clocks in use + */ +#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ + CLOCK_SCCR1_LPC_EN | \ + CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ + CLOCK_SCCR1_PSC_EN(7) | \ + CLOCK_SCCR1_PSCFIFO_EN | \ + CLOCK_SCCR1_DDR_EN | \ + CLOCK_SCCR1_FEC_EN | \ + CLOCK_SCCR1_TPR_EN) + +#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ + CLOCK_SCCR2_SPDIF_EN | \ + CLOCK_SCCR2_DIU_EN | \ + CLOCK_SCCR2_I2C_EN) + + +#define CONFIG_CMDLINE_EDITING 1 /* command line history */ + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_I2C_MULTI_BUS + +/* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0x7F + +/* + * EEPROM configuration for Atmel AT24C01: + * 8-bit addresses, 30ms write delay, 32-Byte Page Write Mode + */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 30 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 + +/* + * Ethernet configuration + */ +#define CONFIG_MPC512x_FEC 1 +#define CONFIG_NET_MULTI +#define CONFIG_PHY_ADDR 0x1F +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_FEC_AN_TIMEOUT 1 +#define CONFIG_HAS_ETH0 + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +/* This has to be a multiple of the flash sector size */ +#define CONFIG_ENV_ADDR 0xFFF40000 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \ + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +#define CONFIG_LOADS_ECHO 1 +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 + +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#undef CONFIG_CMD_FUSE +#define CONFIG_CMD_I2C +#undef CONFIG_CMD_IDE +#undef CONFIG_CMD_EXT2 +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO + +#if defined(CONFIG_PCI) +#define CONFIG_CMD_PCI +#endif + +#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION +#define CONFIG_ISO_PARTITION +#endif /* defined(CONFIG_CMD_IDE) */ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "ac14xx> " /* Monitor Command Prompt */ + +#ifdef CONFIG_CMD_KGDB +# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 32 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* decrementer freq: 1ms ticks */ +#define CONFIG_SYS_HZ 1000 + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) + +/* Cache Configuration */ +#define CONFIG_SYS_DCACHE_SIZE 32768 +#define CONFIG_SYS_CACHELINE_SIZE 32 +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of 32 */ +#endif + +#define CONFIG_SYS_HID0_INIT 0x000000000 +#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ + HID0_ICE) +#define CONFIG_SYS_HID2 HID2_HBE + +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 +#define BOOTFLAG_WARM 0x02 + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_TIMESTAMP + +#define CONFIG_HOSTNAME ac14xx +#define CONFIG_BOOTFILE "ac14xx/uImage" +#define CONFIG_ROOTPATH "/opt/eldk/ppc_6xx" + +/* default load addr for tftp and bootm */ +#define CONFIG_LOADADDR 400000 + +#define CONFIG_BOOTDELAY 2 /* -1 disables auto-boot */ + +/* XXX TODO need to specify the builtin environment */ +#define CONFIG_PREBOOT "echo;" \ + "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ + "echo" + +#define CONFIG_EXTRA_ENV_SETTINGS_DEVEL \ + "muster_nr=00\0" \ + "fromram=run ramargs addip addtty; " \ + "tftp ${fdt_addr_r} k6m2/ac14xx.dtb-${muster_nr}; " \ + "tftp ${kernel_addr_r} k6m2/uImage-${muster_nr}; " \ + "tftp ${ramdisk_addr_r} k6m2/uFS-${muster_nr}; " \ + "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \ + "fromnfs=run nfsargs addip addtty; " \ + "tftp ${fdt_addr_r} k6m2/ac14xx.dtb-${muster_nr}; " \ + "tftp ${kernel_addr_r} k6m2/uImage-${muster_nr}; " \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "fromflash=run nfsargs addip addtty; " \ + "bootm fc020000 - fc000000\0" \ + "mtdargsrec=setenv bootargs root=/dev/mtdblock1 ro\0" \ + "recovery=run mtdargsrec addip addtty; " \ + "bootm ffd20000 - ffee0000\0" \ + "production=run ramargs addip addtty; " \ + "bootm fc020000 fc400000 fc000000\0" \ + "mtdargs=setenv bootargs root=/dev/mtdblock1 ro\0" \ + "prodmtd=run mtdargs addip addtty; " \ + "bootm fc020000 - fc000000\0" \ + "" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "u-boot_addr_r=200000\0" \ + "kernel_addr_r=600000\0" \ + "fdt_addr_r=a00000\0" \ + "ramdisk_addr_r=b00000\0" \ + "u-boot_addr=FFF00000\0" \ + "kernel_addr=FC020000\0" \ + "fdt_addr=FC000000\0" \ + "ramdisk_addr=FC400000\0" \ + "verify=n\0" \ + "ramdiskfile=ac14xx/uRamdisk\0" \ + "u-boot=ac14xx/u-boot.bin\0" \ + "bootfile=ac14xx/uImage\0" \ + "fdtfile=ac14xx/ac14xx.dtb\0" \ + "rootpath=/opt/eldk/ppc_6xx\n" \ + "netdev=eth0\0" \ + "consdev=ttyPSC0\0" \ + "hostname=ac14xx\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}-${muster_nr}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} " \ + "console=${consdev},${baudrate}\0" \ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ + "tftp ${fdt_addr_r} ${fdtfile};" \ + "run nfsargs addip addtty;" \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "net_self=tftp ${kernel_addr_r} ${bootfile};" \ + "tftp ${ramdisk_addr_r} ${ramdiskfile};" \ + "tftp ${fdt_addr_r} ${fdtfile};" \ + "run ramargs addip addtty;" \ + "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\ + "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ + "update=protect off ${u-boot_addr} +${filesize};" \ + "era ${u-boot_addr} +${filesize};" \ + "cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0" \ + CONFIG_EXTRA_ENV_SETTINGS_DEVEL \ + "upd=run load update\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run production" + +#define CONFIG_FIT 1 +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES 1 + +#define OF_CPU "PowerPC,5121@0" +#define OF_SOC_COMPAT "fsl,mpc5121-immr" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc@80000000/serial@11300" + +#endif /* __CONFIG_H */ diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 33ee2c49d5..b7c443c573 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -18,8 +18,7 @@ #define CONFIG_AM33XX -#include <asm/arch/cpu.h> -#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> #define CONFIG_DMA_COHERENT #define CONFIG_DMA_COHERENT_SIZE (1 << 20) @@ -35,6 +34,7 @@ #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM #define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -49,50 +49,100 @@ #define CONFIG_BOOTDELAY 1 #define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "fdtaddr=0x80F80000\0" \ "fdt_high=0xffffffff\0" \ "rdaddr=0x81000000\0" \ - "bootfile=/boot/uImage\0" \ + "bootdir=/boot\0" \ + "bootfile=uImage\0" \ "fdtfile=\0" \ "console=ttyO0,115200n8\0" \ "optargs=\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 ro\0" \ "mmcrootfstype=ext4 rootwait\0" \ + "bootpart=0:2\0" \ + "nandroot=ubi0:rootfs rw ubi.mtd=7,2048\0" \ + "nandrootfstype=ubifs rootwait=1\0" \ + "nandsrcaddr=0x280000\0" \ + "nandimgsize=0x500000\0" \ + "rootpath=/export/rootfs\0" \ + "nfsopts=nolock\0" \ + "static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \ + "::off\0" \ "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ "ramrootfstype=ext2\0" \ "mmcargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ + "nandargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${nandroot} " \ + "rootfstype=${nandrootfstype}\0" \ + "spiroot=/dev/mtdblock4 rw\0" \ + "spirootfstype=jffs2\0" \ + "spisrcaddr=0xe0000\0" \ + "spiimgsize=0x362000\0" \ + "spibusno=0\0" \ + "spiargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${spiroot} " \ + "rootfstype=${spirootfstype}\0" \ + "netargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=/dev/nfs " \ + "nfsroot=${serverip}:${rootpath},${nfsopts} rw " \ + "ip=dhcp\0" \ "bootenv=uEnv.txt\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ + "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ "env import -t $loadaddr $filesize\0" \ "ramargs=setenv bootargs console=${console} " \ "${optargs} " \ "root=${ramroot} " \ "rootfstype=${ramrootfstype}\0" \ - "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ - "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ - "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \ + "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ + "loaduimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ + "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ + "bootm ${loadaddr} - ${fdtaddr}\0" \ + "nandboot=echo Booting from nand ...; " \ + "run nandargs; " \ + "nand read ${loadaddr} ${nandsrcaddr} ${nandimgsize}; " \ "bootm ${loadaddr}\0" \ + "spiboot=echo Booting from spi ...; " \ + "run spiargs; " \ + "sf probe ${spibusno}:0; " \ + "sf read ${loadaddr} ${spisrcaddr} ${spiimgsize}; " \ + "bootm ${loadaddr}\0" \ + "netboot=echo Booting from network ...; " \ + "setenv autoload no; " \ + "dhcp; " \ + "tftp ${loadaddr} ${bootfile}; " \ + "tftp ${fdtaddr} ${fdtfile}; " \ + "run netargs; " \ + "bootm ${loadaddr} - ${fdtaddr}\0" \ "ramboot=echo Booting from ramdisk ...; " \ "run ramargs; " \ - "bootm ${loadaddr}\0" \ + "bootm ${loadaddr} ${rdaddr} ${fdtaddr}\0" \ "findfdt="\ "if test $board_name = A335BONE; then " \ "setenv fdtfile am335x-bone.dtb; fi; " \ + "if test $board_name = A335BNLT; then " \ + "setenv fdtfile am335x-boneblack.dtb; fi; " \ "if test $board_name = A33515BB; then " \ "setenv fdtfile am335x-evm.dtb; fi; " \ "if test $board_name = A335X_SK; then " \ "setenv fdtfile am335x-evmsk.dtb; fi\0" \ +#endif + #define CONFIG_BOOTCOMMAND \ + "run findfdt; " \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "echo SD/MMC found on device ${mmcdev};" \ "if run loadbootenv; then " \ @@ -104,8 +154,11 @@ "run uenvcmd;" \ "fi;" \ "if run loaduimage; then " \ + "run loadfdt;" \ "run mmcboot;" \ "fi;" \ + "else " \ + "run nandboot;" \ "fi;" \ /* Clock Defines */ @@ -145,6 +198,8 @@ #define CONFIG_DOS_PARTITION #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_FS_GENERIC #define CONFIG_SPI #define CONFIG_OMAP3_SPI @@ -237,9 +292,9 @@ #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_BUS 0 #define CONFIG_SPL_SPI_CS 0 -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 -#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x80000 +#define CONFIG_SPL_MUSB_NEW_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_AM33XX_BCH @@ -312,8 +367,38 @@ #ifdef CONFIG_MUSB_GADGET #define CONFIG_USB_ETHER #define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00" #endif /* CONFIG_MUSB_GADGET */ +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT) +/* disable host part of MUSB in SPL */ +#undef CONFIG_MUSB_HOST +/* + * Disable CPSW SPL support so we fit within the 101KiB limit. + */ +#undef CONFIG_SPL_ETH_SUPPORT +#endif + +/* + * Default to using SPI for environment, etc. We have multiple copies + * of SPL as the ROM will check these locations. + * 0x0 - 0x20000 : First copy of SPL + * 0x20000 - 0x40000 : Second copy of SPL + * 0x40000 - 0x60000 : Third copy of SPL + * 0x60000 - 0x80000 : Fourth copy of SPL + * 0x80000 - 0xDF000 : U-Boot + * 0xDF000 - 0xE0000 : U-Boot Environment + * 0xE0000 - 0x442000 : Linux Kernel + * 0x442000 - 0x800000 : Userland + */ +#if defined(CONFIG_SPI_BOOT) +# undef CONFIG_ENV_IS_NOWHERE +# define CONFIG_ENV_IS_IN_SPI_FLASH +# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +# define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */ +# define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */ +#endif /* SPI support */ + /* Unsupported features */ #undef CONFIG_USE_IRQ @@ -346,10 +431,12 @@ /* CS0 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#if !defined(CONFIG_SPI_BOOT) #undef CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ #endif +#endif #endif /* ! __CONFIG_AM335X_EVM_H */ diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h index 73c66af06d..32421339d5 100644 --- a/include/configs/apx4devkit.h +++ b/include/configs/apx4devkit.h @@ -182,7 +182,8 @@ #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MXS -#define CONFIG_EHCI_MXS_PORT 1 +#define CONFIG_EHCI_MXS_PORT1 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_STORAGE #endif @@ -222,7 +223,7 @@ "root=ubi0:rootfs rootfstype=ubifs ${mtdparts} rw\0" \ "bootcmd_nand=" \ "run bootargs_nand && ubi part root 2048 && " \ - "ubifsmount rootfs && ubifsload 41000000 boot/uImage && " \ + "ubifsmount ubi:rootfs && ubifsload 41000000 boot/uImage && " \ "bootm 41000000\0" \ "bootargs_mmc=" \ "setenv bootargs ${kernelargs} " \ diff --git a/include/configs/aria.h b/include/configs/aria.h index 0b31c50daf..b4253996a0 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -64,7 +64,6 @@ #define CONFIG_SYS_MPC512X_CLKIN 33000000 /* in Hz */ -#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R #define CONFIG_SYS_IMMR 0x80000000 @@ -266,11 +265,16 @@ #define CONFIG_SYS_ARIA_SRAM_BASE (CONFIG_SYS_SRAM_BASE + \ CONFIG_SYS_SRAM_SIZE) #define CONFIG_SYS_ARIA_SRAM_SIZE 0x00100000 /* reserve 1MB-window */ +#define CONFIG_SYS_CS6_START CONFIG_SYS_ARIA_SRAM_BASE +#define CONFIG_SYS_CS6_SIZE CONFIG_SYS_ARIA_SRAM_SIZE #define CONFIG_SYS_ARIA_FPGA_BASE (CONFIG_SYS_ARIA_SRAM_BASE + \ CONFIG_SYS_ARIA_SRAM_SIZE) #define CONFIG_SYS_ARIA_FPGA_SIZE 0x20000 /* 128 KB */ +#define CONFIG_SYS_CS2_START CONFIG_SYS_ARIA_FPGA_BASE +#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_ARIA_FPGA_SIZE + #define CONFIG_SYS_CS0_CFG 0x05059150 #define CONFIG_SYS_CS2_CFG ( (5 << 24) | \ (5 << 16) | \ @@ -643,4 +647,21 @@ #define FSL_ATA_CTRL_DMA_WRITE 0x02000000 #define FSL_ATA_CTRL_IORDY_EN 0x01000000 +/* Clocks in use */ +#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ + CLOCK_SCCR1_LPC_EN | \ + CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ + CLOCK_SCCR1_PSCFIFO_EN | \ + CLOCK_SCCR1_DDR_EN | \ + CLOCK_SCCR1_FEC_EN | \ + CLOCK_SCCR1_NFC_EN | \ + CLOCK_SCCR1_PATA_EN | \ + CLOCK_SCCR1_PCI_EN | \ + CLOCK_SCCR1_TPR_EN) + +#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ + CLOCK_SCCR2_SPDIF_EN | \ + CLOCK_SCCR2_DIU_EN | \ + CLOCK_SCCR2_I2C_EN) + #endif /* __CONFIG_H */ diff --git a/include/configs/at91rm9200ek.h b/include/configs/at91rm9200ek.h index bf20065afd..7352113266 100644 --- a/include/configs/at91rm9200ek.h +++ b/include/configs/at91rm9200ek.h @@ -75,6 +75,9 @@ #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT + /* * Memory Configuration */ diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index f921fac64d..ebcc69afa3 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -62,6 +62,9 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT + /* general purpose I/O */ #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ #define CONFIG_AT91_GPIO @@ -126,6 +129,7 @@ #endif /* DataFlash */ +#ifndef CONFIG_AT91SAM9G20EK_2MMC #define CONFIG_ATMEL_DATAFLASH_SPI #define CONFIG_HAS_DATAFLASH 1 #define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ) @@ -133,6 +137,7 @@ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS1 0xD0000000 /* CS1 */ #define AT91_SPI_CLK 15000000 +#endif #ifdef CONFIG_AT91SAM9G20EK #define DATAFLASH_TCSS (0x22 << 16) @@ -210,16 +215,16 @@ /* bootstrap + u-boot + env + linux in nandflash */ #define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock5 " \ - "mtdparts=atmel_nand:128k(bootstrap)ro," \ - "256k(uboot)ro,128k(env1)ro," \ - "128k(env2)ro,2M(linux),-(root) " \ - "rw rootfstype=jffs2" +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "root=/dev/mtdblock7 rw rootfstype=jffs2" #endif diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index 611e3e2532..cabff9a9fe 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -212,17 +212,16 @@ /* bootstrap + u-boot + env + linux in nandflash */ #define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock5 " \ - "mtdparts=atmel_nand:128k(bootstrap)ro," \ - "256k(uboot)ro,128k(env1)ro," \ - "128k(env2)ro,2M(linux),-(root) " \ - "rw rootfstype=jffs2" - +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "root=/dev/mtdblock7 rw rootfstype=jffs2" #endif #define CONFIG_SYS_PROMPT "U-Boot> " diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 35038229ad..1ab9c30488 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -62,6 +62,9 @@ #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT + /* * Hardware drivers */ @@ -324,15 +327,16 @@ /* bootstrap + u-boot + env + linux in nandflash */ #define CONFIG_ENV_IS_IN_NAND 1 -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ -#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm" -#define CONFIG_BOOTARGS "console=ttyS0,115200 " \ - "root=/dev/mtdblock5 " \ - "mtdparts=atmel_nand:128k(bootstrap)ro,256k(uboot)ro,128k(env1)ro,128k(env2)ro,2M(linux),-(root) " \ - "rw rootfstype=jffs2" - +#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm" +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "root=/dev/mtdblock7 rw rootfstype=jffs2" #endif #define CONFIG_SYS_PROMPT "U-Boot> " diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index e988d81410..07e1c9f890 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -47,6 +47,7 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT /* general purpose I/O */ @@ -149,19 +150,19 @@ /* bootstrap + u-boot + env in nandflash */ #define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0x60000 -#define CONFIG_ENV_OFFSET_REDUND 0x80000 +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 #define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_BOOTCOMMAND "nand read 0x70000000 0x100000 0x200000;" \ +#define CONFIG_BOOTCOMMAND \ + "nand read 0x70000000 0x200000 0x300000;" \ "bootm 0x70000000" #define CONFIG_BOOTARGS \ "console=ttyS0,115200 earlyprintk " \ - "root=/dev/mtdblock5 " \ - "mtdparts=atmel_nand:128k(bootstrap)ro," \ - "256k(uboot)ro,128k(env1)ro,128k(env2)ro," \ - "2M@1M(linux),-(root) " \ - "rw rootfstype=jffs2" + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "root=/dev/mtdblock7 rw rootfstype=jffs2" #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 8178b32a84..aa359b13db 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -48,6 +48,9 @@ #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT + #define CONFIG_ATMEL_LEGACY #define CONFIG_AT91_GPIO 1 #define CONFIG_AT91_GPIO_PULLUP 1 diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 6fac5ac4eb..ee6e3fcdec 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -42,6 +42,7 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT /* general purpose I/O */ @@ -231,11 +232,12 @@ "root=/dev/mmcblk0p2 " \ "rw rootfstype=ext4 rootwait" #else -#define CONFIG_BOOTARGS "mem=128M console=ttyS0,115200 " \ - "mtdparts=atmel_nand:" \ - "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \ - "root=/dev/mtdblock1 rw " \ - "rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs" +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256k(env),256k(env_redundant),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw" #endif #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h new file mode 100644 index 0000000000..02149fa94d --- /dev/null +++ b/include/configs/bf609-ezkit.h @@ -0,0 +1,162 @@ +/* + * U-boot - Configuration file for BF609 EZ-Kit board + */ + +#ifndef __CONFIG_BF609_EZKIT_H__ +#define __CONFIG_BF609_EZKIT_H__ + +#include <asm/config-pre.h> + +/* + * Processor Settings + */ +#define CONFIG_BFIN_CPU bf609-0.0 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA + + +/* For ez-board version 1.0, else undef this */ +#define CONFIG_BFIN_BOARD_VERSION_1_0 + +/* + * Clock Settings + * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV + * SCLK = (CLKIN * VCO_MULT) / SYSCLK_DIV + * SCLK0 = SCLK / SCLK0_DIV + * SCLK1 = SCLK / SCLK1_DIV + */ +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ (25000000) +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ +#define CONFIG_CLKIN_HALF (0) + +/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ +/* Values can range from 0-127 (where 0 means 128) */ +#define CONFIG_VCO_MULT (20) + +/* CCLK_DIV controls the core clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_CCLK_DIV (1) +/* SCLK_DIV controls the system clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_SCLK_DIV (4) +/* Values can range from 0-7 (where 0 means 8) */ +#define CONFIG_SCLK0_DIV (1) +#define CONFIG_SCLK1_DIV (1) +/* DCLK_DIV controls the DDR clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_DCLK_DIV (2) +/* OCLK_DIV controls the output clock divider */ +/* Values can range from 0-127 (where 0 means 128) */ +#define CONFIG_OCLK_DIV (16) + +/* + * Memory Settings + */ +#define CONFIG_MEM_SIZE 128 + +#define CONFIG_SMC_GCTL_VAL 0x00000010 +#define CONFIG_SMC_B0CTL_VAL 0x01007011 +#define CONFIG_SMC_B0TIM_VAL 0x08170977 +#define CONFIG_SMC_B0ETIM_VAL 0x00092231 + +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) + +#define CONFIG_HW_WATCHDOG +/* + * Network Settings + */ +#define ADI_CMDS_NETWORK +#define CONFIG_NETCONSOLE +#define CONFIG_NET_MULTI +#define CONFIG_HOSTNAME "bf609-ezkit" +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_PORTS 1 +#define CONFIG_DW_AUTONEG +#define CONFIG_DW_ALTDESCRIPTOR +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_MII + +/* i2c Settings */ +#define CONFIG_BFIN_TWI_I2C +#define CONFIG_HARD_I2C + +/* + * Flash Settings + */ +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_JFFS2 +#define CONFIG_SYS_FLASH_CFI_WIDTH 2 +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_BASE 0xb0000000 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 131 +#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS + +/* + * SPI Settings + */ +#define CONFIG_BFIN_SPI6XX +#define CONFIG_ENV_SPI_MAX_HZ 25000000 +#define CONFIG_SF_DEFAULT_SPEED 25000000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ALL + +/* + * Env Storage Settings + */ +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x10000 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_SIZE 0x20000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_OFFSET 0x8000 +#define CONFIG_ENV_SIZE 0x8000 +#define CONFIG_ENV_SECT_SIZE 0x8000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#endif + +#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0xB0100000\0" + +/* + * SDH Settings + */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_BFIN_SDH + +/* + * Misc Settings + */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_UART_CONSOLE 0 + +#define CONFIG_CMD_MEMORY + +#define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4) +#define CONFIG_BFIN_SOFT_SWITCH + +#if 0 +#define CONFIG_UART_MEM 1024 +#undef CONFIG_UART_CONSOLE +#undef CONFIG_JTAG_CONSOLE +#undef CONFIG_UART_CONSOLE_IS_JTAG +#endif + +/* + * Pull in common ADI header for remaining command/environment setup + */ +#include <configs/bfin_adi_common.h> +#endif diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index ccdec0d564..d3ae3a71cd 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -10,7 +10,7 @@ */ #ifndef _CONFIG_CMD_DEFAULT_H # include <config_cmd_default.h> -# if ADI_CMDS_NETWORK +# ifdef ADI_CMDS_NETWORK # define CONFIG_CMD_DHCP # define CONFIG_BOOTP_SUBNETMASK # define CONFIG_BOOTP_GATEWAY @@ -58,7 +58,7 @@ # endif # ifdef CONFIG_RTC_BFIN # define CONFIG_CMD_DATE -# if ADI_CMDS_NETWORK +# ifdef ADI_CMDS_NETWORK # define CONFIG_CMD_SNTP # endif # endif @@ -193,10 +193,12 @@ "nand erase 0 0x40000;" \ "nand write $(loadaddr) 0 0x40000" # else -# define UBOOT_ENV_UPDATE \ +# ifndef UBOOT_ENV_UPDATE +# define UBOOT_ENV_UPDATE \ "protect off 0x20000000 +$(filesize);" \ "erase 0x20000000 +$(filesize);" \ "cp.b $(loadaddr) 0x20000000 $(filesize)" +# endif # endif # ifdef CONFIG_NETCONSOLE # define NETCONSOLE_ENV \ diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h index a7a698c0ca..56528ddaaf 100644 --- a/include/configs/cam_enc_4xx.h +++ b/include/configs/cam_enc_4xx.h @@ -451,7 +451,7 @@ "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage \0" \ "kernel_addr_r=80600000\0" \ "load_kernel=tftp ${kernel_addr_r} ${bootfile}\0" \ - "ubi_load_kernel=ubi part ubi 2048;ubifsmount ${img_volume};" \ + "ubi_load_kernel=ubi part ubi 2048;ubifsmount ubi:${img_volume};" \ "ubifsload ${kernel_addr_r} boot/uImage\0" \ "fit_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0" \ "img_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0" \ diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 1616b39778..55dc83da6a 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -47,7 +47,17 @@ #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_CMD_I2C -#define CONFIG_ENV_IS_NOWHERE +/* SD/MMC */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_TEGRA_MMC +#define CONFIG_CMD_MMC + +/* Environment in eMMC, at the end of 2nd "boot sector" */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 2 /* SPI */ #define CONFIG_TEGRA_SLINK diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 943b65841c..726714dd21 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -331,9 +331,22 @@ #define STATUS_LED_BOOT STATUS_LED_BIT #define GREEN_LED_GPIO 186 /* CM-T35 Green LED is GPIO186 */ +#define CONFIG_SPLASHIMAGE_GUARD + /* GPIO banks */ #ifdef CONFIG_STATUS_LED #define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */ #endif +/* Display Configuration */ +#define CONFIG_OMAP3_GPIO_2 +#define CONFIG_VIDEO_OMAP3 +#define LCD_BPP LCD_COLOR16 + +#define CONFIG_LCD +#define CONFIG_SPLASH_SCREEN +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP +#define CONFIG_SPLASH_SCREEN_PREPARE + #endif /* __CONFIG_H */ diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h index 0e5f281b25..856c860cda 100644 --- a/include/configs/colibri_t20_iris.h +++ b/include/configs/colibri_t20_iris.h @@ -40,12 +40,6 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -/* File system support */ -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - /* USB host support */ #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index c7f36ff148..87daf62681 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -42,6 +42,12 @@ #define CONFIG_ZBOOT_32 #define CONFIG_PHYSMEM +#define CONFIG_LMB +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE +#define CONFIG_DEFAULT_DEVICE_TREE link + /*----------------------------------------------------------------------- * Watchdog Configuration */ @@ -267,6 +273,23 @@ */ #define CONFIG_PCI +/*----------------------------------------------------------------------- + * USB configuration + */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_PCI +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 12 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_KEYBOARD +#define CONFIG_SYS_USB_EVENT_POLL + +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_SMSC95XX + +#define CONFIG_CMD_USB + #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_STD_DEVICES_SETTINGS diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index ce32c8030b..b1a6e34eba 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -41,6 +41,15 @@ #define CONFIG_MACH_TYPE MACH_TYPE_DALMORE #define CONFIG_BOARD_EARLY_INIT_F + +/* I2C */ +#define CONFIG_TEGRA_I2C +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_MAX_I2C_BUS TEGRA_I2C_NUM_CONTROLLERS +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_CMD_I2C + #define CONFIG_ENV_IS_NOWHERE #define MACH_TYPE_DALMORE 4304 /* not yet in mach-types.h */ diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index d926f74026..788227d79d 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -354,7 +354,6 @@ /* SPL OS boot options */ #define CONFIG_SPL_OS_BOOT -#define CONFIG_SPL_OS_BOOT_KEY 26 #define CONFIG_CMD_SPL #define CONFIG_CMD_SPL_WRITE_SIZE 0x400 /* 1024 byte */ diff --git a/include/configs/dockstar.h b/include/configs/dockstar.h index 249f93bf13..63d5e35e92 100644 --- a/include/configs/dockstar.h +++ b/include/configs/dockstar.h @@ -85,7 +85,7 @@ #define CONFIG_BOOTCOMMAND \ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ "ubi part root; " \ - "ubifsmount root; " \ + "ubifsmount ubi:root; " \ "ubifsload 0x800000 ${kernel}; " \ "ubifsload 0x1100000 ${initrd}; " \ "bootm 0x800000 0x1100000" diff --git a/board/pcippc2/ns16550.h b/include/configs/dra7xx_evm.h index 7023f13a35..10a493995f 100644 --- a/board/pcippc2/ns16550.h +++ b/include/configs/dra7xx_evm.h @@ -1,6 +1,10 @@ /* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * (C) Copyright 2013 + * Texas Instruments Incorporated. + * Lokesh Vutla <lokeshvutla@ti.com> + * + * Configuration settings for the TI DRA7XX board. + * See omap5_common.h for omap5 common settings. * * See file CREDITS for list of people who contributed to this * project. @@ -21,21 +25,12 @@ * MA 02111-1307 USA */ -#ifndef _NS16550_H_ -#define _NS16550_H_ +#ifndef __CONFIG_DRA7XX_EVM_H +#define __CONFIG_DRA7XX_EVM_H -#define NS16550_RBR 0x00 -#define NS16550_IER 0x01 -#define NS16550_FCR 0x02 -#define NS16550_LCR 0x03 -#define NS16550_MCR 0x04 -#define NS16550_LSR 0x05 -#define NS16550_MSR 0x06 -#define NS16550_SCR 0x07 +#include <configs/omap5_common.h> -#define NS16550_THR NS16550_RBR -#define NS16550_IIR NS16550_FCR -#define NS16550_DLL NS16550_RBR -#define NS16550_DLM NS16550_IER +#define CONFIG_DRA7XX /* in a TI DRA7XX core */ +#define CONFIG_SYS_PROMPT "DRA752 EVM # " -#endif +#endif /* __CONFIG_DRA7XX_EVM_H */ diff --git a/include/configs/ea20.h b/include/configs/ea20.h index d3eb5969dc..90fc7c58d2 100644 --- a/include/configs/ea20.h +++ b/include/configs/ea20.h @@ -42,6 +42,7 @@ #define CONFIG_MACH_DAVINCI_DA850_EVM #define CONFIG_ARM926EJS /* arm926ejs CPU core */ #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SOC_DA850 /* TI DA850 SoC */ #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) #define CONFIG_SYS_OSCIN_FREQ 24000000 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE @@ -293,12 +294,12 @@ "bootm ${kernel_addr_r}\0" \ "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ - "nand_nand=ubi part nand0,${as};ubifsmount rootfs;" \ + "nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ "ubifsload ${kernel_addr_r} /boot/uImage;" \ "ubifsumount; run nandargs addip addtty " \ "addmtd addmisc addmem;clrlogo;" \ "bootm ${kernel_addr_r}\0" \ - "nand_nandrw=ubi part nand0,${as};ubifsmount rootfs;" \ + "nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ "ubifsload ${kernel_addr_r} /boot/uImage;" \ "ubifsumount; run nandrwargs addip addtty " \ "addmtd addmisc addmem;clrlogo;" \ @@ -309,7 +310,7 @@ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ "load_magic=if sf probe 0;then sf " \ "read c0000000 0x10000 0x60000;fi\0" \ - "load_nand=ubi part nand0,${as};ubifsmount rootfs;" \ + "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ "if ubifsload c0000014 /boot/u-boot.bin;" \ "then mw c0000008 ${filesize};else echo Error reading" \ " u-boot from nand!;fi\0" \ diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h index f334d4595a..2b9d6ac061 100644 --- a/include/configs/exynos5250-dt.h +++ b/include/configs/exynos5250-dt.h @@ -33,6 +33,7 @@ #include <asm/arch/cpu.h> /* get chip and board defs */ +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_ARCH_CPU_INIT #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 8d1fd47afe..0c73f86ec1 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -56,14 +56,6 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_FS_EXT4 -#define CONFIG_FS_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC - /* NAND support */ #define CONFIG_CMD_NAND #define CONFIG_TEGRA_NAND diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index f646ae5776..d3c664cd18 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -88,7 +88,7 @@ #define CONFIG_BOOTCOMMAND \ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ "ubi part root; " \ - "ubifsmount root; " \ + "ubifsmount ubi:root; " \ "ubifsload 0x800000 ${kernel}; " \ "ubifsload 0x1100000 ${initrd}; " \ "bootm 0x800000 0x1100000" diff --git a/include/configs/iconnect.h b/include/configs/iconnect.h index ba57849a60..c882bfa606 100644 --- a/include/configs/iconnect.h +++ b/include/configs/iconnect.h @@ -87,7 +87,7 @@ #define CONFIG_BOOTCOMMAND \ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ "ubi part rootfs; " \ - "ubifsmount rootfs; " \ + "ubifsmount ubi:rootfs; " \ "ubifsload 0x800000 ${kernel}; " \ "bootm 0x800000" diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index 0e7f9247c8..849fb1624f 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -36,6 +36,7 @@ #include <asm/arch/cpu.h> #include <asm/arch/omap3.h> +#include <asm/mach-types.h> /* * Display CPU and Board information @@ -54,7 +55,8 @@ #define CONFIG_INITRD_TAG 1 #define CONFIG_REVISION_TAG 1 -#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ /* * NS16550 Configuration @@ -86,7 +88,10 @@ #define CONFIG_DOS_PARTITION 1 /* define to enable boot progress via leds */ +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ + (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) #define CONFIG_SHOW_BOOT_PROGRESS +#endif /* USB */ #define CONFIG_MUSB_UDC 1 @@ -118,7 +123,8 @@ #ifdef CONFIG_BOOT_NAND #define CONFIG_CMD_NAND #endif -#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \ + (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032) #define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ #endif #define CONFIG_CMD_DHCP diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index f64748e349..3b15c4e691 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -24,10 +24,6 @@ #ifndef __CONFIG_KEYMILE_H #define __CONFIG_KEYMILE_H -/* Do boardspecific init for all boards */ -#define CONFIG_BOARD_EARLY_INIT_R -#define CONFIG_LAST_STAGE_INIT - #define CONFIG_BOOTCOUNT_LIMIT /* @@ -148,6 +144,14 @@ "ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0" #endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */ +#ifdef CONFIG_NAND_ECC_BCH +#define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0" +#define CONFIG_KM_ECC_MODE " eccmode=bch" +#else +#define CONFIG_KM_UIMAGE_NAME "uImage\0" +#define CONFIG_KM_ECC_MODE +#endif + /* * boottargets * - set 'subbootcmds' @@ -184,6 +188,7 @@ ":${hostname}:${netdev}:off3" \ " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}" \ " mem=${kernelmem} init=${init}" \ + CONFIG_KM_ECC_MODE \ " phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\ " " CONFIG_KM_UBI_LINUX_MTD " " \ CONFIG_KM_DEF_BOOT_ARGS_CPU \ @@ -210,9 +215,10 @@ */ #define CONFIG_KM_DEF_ENV_FLASH_BOOT \ "cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0" \ - "cramfsloadkernel=cramfsload ${load_addr_r} uImage\0" \ + "cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0" \ "ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR) \ " bootfs${boot_bank}\0" \ + "uimage=" CONFIG_KM_UIMAGE_NAME \ CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI /* diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h index bd5bdbcb48..b84f12dbeb 100644 --- a/include/configs/km/km-powerpc.h +++ b/include/configs/km/km-powerpc.h @@ -24,6 +24,10 @@ #ifndef __CONFIG_KEYMILE_POWERPC_H #define __CONFIG_KEYMILE_POWERPC_H +/* Do boardspecific init for all boards */ +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_LAST_STAGE_INIT + #define CONFIG_BOOTCOUNT_LIMIT #define CONFIG_CMD_DTT diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h index b36e892cbe..7f9cffa3b7 100644 --- a/include/configs/km/km8309-common.h +++ b/include/configs/km/km8309-common.h @@ -22,7 +22,7 @@ #define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8309 1 /* MPC8309 CPU specific */ -#define CONFIG_KM_DEF_ARCH "arch=ppc_8xx\0" +#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" #define CONFIG_CMD_DIAG 1 /* include common defines/options for all 83xx Keymile boards */ @@ -33,8 +33,6 @@ /* at end of uboot partition, before env */ #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xF00B0000 -#define CONFIG_MISC_INIT_R - /* * System IO Config */ diff --git a/include/configs/km/km8321-common.h b/include/configs/km/km8321-common.h index 8ad6fc3a33..abb908162a 100644 --- a/include/configs/km/km8321-common.h +++ b/include/configs/km/km8321-common.h @@ -38,8 +38,6 @@ /* include common defines/options for all 83xx Keymile boards */ #include "km83xx-common.h" -#define CONFIG_MISC_INIT_R - /* * System IO Config */ diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h index a9823d6ef9..eb0e5b6f32 100644 --- a/include/configs/km/km83xx-common.h +++ b/include/configs/km/km83xx-common.h @@ -165,19 +165,15 @@ #define CONFIG_UEC_ETH #define CONFIG_ETHPRIME "UEC0" +#if !defined(CONFIG_MPC8309) #define CONFIG_UEC_ETH1 /* GETH1 */ #define UEC_VERBOSE_DEBUG 1 +#endif #ifdef CONFIG_UEC_ETH1 -#if defined(CONFIG_MPC8309) -#define CONFIG_SYS_UEC1_UCC_NUM 2 /* UCC3 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12 -#else #define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */ #define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ #define CONFIG_SYS_UEC1_TX_CLK QE_CLK17 -#endif #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 0 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII @@ -316,7 +312,6 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_KM_DEF_ENV \ CONFIG_KM_DEF_ARCH \ - "dtt_bus=pca9547:70:a\0" \ "EEprom_ivm=pca9547:70:9\0" \ "newenv=" \ "prot off 0xF00C0000 +0x40000 && " \ diff --git a/include/configs/km8360.h b/include/configs/km8360.h index 7631ab6a65..5b191bcdcd 100644 --- a/include/configs/km8360.h +++ b/include/configs/km8360.h @@ -25,6 +25,8 @@ #define CONFIG_KM_BOARD_NAME "kmcoge5ne" #define CONFIG_KM_DEF_NETDEV "netdev=eth1\0" #define CONFIG_CMD_NAND +#define CONFIG_NAND_ECC_BCH +#define CONFIG_BCH #define CONFIG_NAND_KMETER1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 1b51fe2dc5..f2725cc87f 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -233,7 +233,9 @@ #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MXS -#define CONFIG_EHCI_MXS_PORT 1 +#define CONFIG_EHCI_MXS_PORT0 +#define CONFIG_EHCI_MXS_PORT1 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_STORAGE #endif @@ -244,7 +246,6 @@ #ifdef CONFIG_CMD_SPI #define CONFIG_HARD_SPI #define CONFIG_MXS_SPI -#define CONFIG_MXS_SPI_DMA_ENABLE #define CONFIG_SPI_HALF_DUPLEX #define CONFIG_DEFAULT_SPI_BUS 2 #define CONFIG_DEFAULT_SPI_CS 0 diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index cafc273c8c..af302573e6 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -191,6 +191,10 @@ #define CONFIG_SYS_SRAM_BASE 0x30000000 #define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ +/* Initialize Local Window for NOR FLASH access */ +#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE + /* ALE active low, data size 4bytes */ #define CONFIG_SYS_CS0_CFG 0x05051150 @@ -201,6 +205,9 @@ #define CONFIG_SYS_CS1_CFG 0x1f1f3090 #define CONFIG_SYS_VPC3_BASE 0x82000000 /* start of VPC3 space */ #define CONFIG_SYS_VPC3_SIZE 0x00010000 /* max VPC3 size */ +/* Initialize Local Window for VPC3 access */ +#define CONFIG_SYS_CS1_START CONFIG_SYS_VPC3_BASE +#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_VPC3_SIZE /* Use SRAM for initial stack */ #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Init RAM addr */ @@ -235,6 +242,23 @@ #define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE #define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR +/* + * Clocks in use + */ +#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ + CLOCK_SCCR1_LPC_EN | \ + CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ + CLOCK_SCCR1_PSCFIFO_EN | \ + CLOCK_SCCR1_DDR_EN | \ + CLOCK_SCCR1_FEC_EN | \ + CLOCK_SCCR1_NFC_EN | \ + CLOCK_SCCR1_PCI_EN | \ + CLOCK_SCCR1_TPR_EN) + +#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ + CLOCK_SCCR2_I2C_EN) + + #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ /* Use the HUSH parser */ #define CONFIG_SYS_HUSH_PARSER diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index bae4ba0bb5..57a50d730c 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -66,11 +66,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - #define CONFIG_FIT #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 3f55d354ef..6e6af62cca 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -258,6 +258,8 @@ */ #define CONFIG_SYS_CPLD_BASE 0x82000000 #define CONFIG_SYS_CPLD_SIZE 0x00010000 /* 64 KB */ +#define CONFIG_SYS_CS2_START CONFIG_SYS_CPLD_BASE +#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_CPLD_SIZE #define CONFIG_SYS_SRAM_BASE 0x30000000 #define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ @@ -310,6 +312,27 @@ #endif /* + * Clocks in use + */ +#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ + CLOCK_SCCR1_DDR_EN | \ + CLOCK_SCCR1_FEC_EN | \ + CLOCK_SCCR1_LPC_EN | \ + CLOCK_SCCR1_NFC_EN | \ + CLOCK_SCCR1_PATA_EN | \ + CLOCK_SCCR1_PCI_EN | \ + CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ + CLOCK_SCCR1_PSCFIFO_EN | \ + CLOCK_SCCR1_TPR_EN) + +#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_DIU_EN | \ + CLOCK_SCCR2_I2C_EN | \ + CLOCK_SCCR2_MEM_EN | \ + CLOCK_SCCR2_SPDIF_EN | \ + CLOCK_SCCR2_USB1_EN | \ + CLOCK_SCCR2_USB2_EN) + +/* * PCI */ #ifdef CONFIG_PCI diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index 7983c5d55f..03893d744d 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -19,6 +19,8 @@ #ifndef __MX23_OLINUXINO_CONFIG_H__ #define __MX23_OLINUXINO_CONFIG_H__ +#include <asm/arch/iomux-mx23.h> + /* * SoC configurations */ @@ -53,10 +55,14 @@ #define CONFIG_DOS_PARTITION #define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_GPIO +#define CONFIG_CMD_LED #define CONFIG_CMD_MMC +#define CONFIG_CMD_NET +#define CONFIG_CMD_USB /* * Memory configurations @@ -112,6 +118,17 @@ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ /* + * Status LED + */ +#define CONFIG_STATUS_LED +#define CONFIG_GPIO_LED +#define CONFIG_BOARD_SPECIFIC_LED +#define STATUS_LED_BOOT 0 +#define STATUS_LED_BIT MX23_PAD_SSP1_DETECT__GPIO_2_1 +#define STATUS_LED_STATE STATUS_LED_ON +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) + +/* * MMC Driver */ #ifdef CONFIG_CMD_MMC @@ -126,6 +143,22 @@ */ #define CONFIG_APBH_DMA +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MXS +#define CONFIG_EHCI_MXS_PORT0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#endif + +/* Ethernet */ +#ifdef CONFIG_CMD_NET +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX +#endif + /* * Boot Linux */ @@ -167,6 +200,7 @@ "fdt_file=imx23-olinuxino.dtb\0" \ "fdt_addr=0x41000000\0" \ "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ "mmcdev=0\0" \ "mmcpart=2\0" \ "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ @@ -192,6 +226,31 @@ "fi; " \ "else " \ "bootm; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console_mainline},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "usb start; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${uimage}; " \ + "if test ${boot_fdt} = yes; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi;" \ + "fi; " \ + "else " \ + "bootm; " \ "fi;\0" #define CONFIG_BOOTCOMMAND \ @@ -201,10 +260,9 @@ "else " \ "if run loaduimage; then " \ "run mmcboot; " \ - "else " \ - "echo ERR: Fail to boot from MMC; " \ + "else run netboot; " \ "fi; " \ "fi; " \ - "else exit; fi" + "else run netboot; fi" #endif /* __MX23_OLINUXINO_CONFIG_H__ */ diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h index c44a8b8016..e5a15a451c 100644 --- a/include/configs/mx23evk.h +++ b/include/configs/mx23evk.h @@ -33,8 +33,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_MX23EVK #define CONFIG_SYS_NO_FLASH -#define CONFIG_SYS_ICACHE_OFF -#define CONFIG_SYS_DCACHE_OFF #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_ARCH_MISC_INIT @@ -60,6 +58,7 @@ #define CONFIG_CMD_FAT #define CONFIG_CMD_GPIO #define CONFIG_CMD_MMC +#define CONFIG_CMD_USB #define CONFIG_CMD_BOOTZ /* Memory configurations */ @@ -112,7 +111,6 @@ #define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE } #define CONFIG_CONS_INDEX 0 #define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* DMA */ #define CONFIG_APBH_DMA @@ -125,6 +123,16 @@ #define CONFIG_MXS_MMC #endif +/* USB */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MXS +#define CONFIG_EHCI_MXS_PORT0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_USB_STORAGE +#endif + /* Boot Linux */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 71447d910e..0d918a153d 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -181,7 +181,8 @@ #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MXS -#define CONFIG_EHCI_MXS_PORT 1 +#define CONFIG_EHCI_MXS_PORT1 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_STORAGE #define CONFIG_USB_HOST_ETHER @@ -202,7 +203,6 @@ #ifdef CONFIG_CMD_SPI #define CONFIG_HARD_SPI #define CONFIG_MXS_SPI -#define CONFIG_MXS_SPI_DMA_ENABLE #define CONFIG_SPI_HALF_DUPLEX #define CONFIG_DEFAULT_SPI_BUS 2 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0 diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h new file mode 100644 index 0000000000..b333937827 --- /dev/null +++ b/include/configs/mx6_common.h @@ -0,0 +1,23 @@ +/* + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __MX6_COMMON_H +#define __MX6_COMMON_H + +#define CONFIG_ARM_ERRATA_743622 +#define CONFIG_ARM_ERRATA_751472 + +#endif diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index 138e460180..bd52cde56b 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -24,6 +24,9 @@ #define CONFIG_MX6 #define CONFIG_MX6Q + +#include "mx6_common.h" + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h index d76357c70f..9eda9ed91a 100644 --- a/include/configs/mx6qsabre_common.h +++ b/include/configs/mx6qsabre_common.h @@ -19,6 +19,9 @@ #define CONFIG_MX6 #define CONFIG_MX6Q + +#include "mx6_common.h" + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -171,6 +174,7 @@ #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 752f0981d2..5dc8255cec 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -24,6 +24,9 @@ #define CONFIG_MX6 #define CONFIG_MX6Q + +#include "mx6_common.h" + #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -241,6 +244,7 @@ #define CONFIG_SYS_MEMTEST_START 0x10000000 #define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR #define CONFIG_SYS_HZ 1000 diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h new file mode 100644 index 0000000000..93e7fe4e62 --- /dev/null +++ b/include/configs/nitrogen6x.h @@ -0,0 +1,285 @@ +/* + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. + * + * Configuration settings for the Boundary Devices Nitrogen6X + * and Freescale i.MX6Q Sabre Lite boards. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MX6 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_MACH_TYPE 3769 + +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART2_BASE + +#define CONFIG_CMD_SF +#ifdef CONFIG_CMD_SF +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SST +#define CONFIG_MXC_SPI +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8)) +#define CONFIG_SF_DEFAULT_SPEED 25000000 +#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) +#endif + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_SPEED 100000 + +/* OCOTP Configs */ +#define CONFIG_CMD_IMXOTP +#ifdef CONFIG_CMD_IMXOTP +#define CONFIG_IMX_OTP +#define IMX_OTP_BASE OCOTP_BASE_ADDR +#define IMX_OTP_ADDR_MAX 0x7F +#define IMX_OTP_DATA_ERROR_VAL 0xBADABADA +#define IMX_OTPWRITE_ENABLED +#endif + +/* MMC Configs */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_USDHC_NUM 2 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +#ifdef CONFIG_MX6Q +#define CONFIG_CMD_SATA +#endif + +/* + * SATA Configs + */ +#ifdef CONFIG_CMD_SATA +#define CONFIG_DWC_AHSATA +#define CONFIG_SYS_SATA_MAX_DEVICE 1 +#define CONFIG_DWC_AHSATA_PORT_ID 0 +#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR +#define CONFIG_LBA48 +#define CONFIG_LIBATA +#endif + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 6 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 + +/* USB Configs */ +#define CONFIG_CMD_USB +#define CONFIG_CMD_FAT +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_MX6 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_USB_ETHER_SMSC95XX +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 + +/* Miscellaneous commands */ +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_SETEXPR + +/* Framebuffer and LCD */ +#define CONFIG_VIDEO +#define CONFIG_VIDEO_IPUV3 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_LOGO +#define CONFIG_IPUV3_CLK 260000000 +#define CONFIG_CMD_HDMIDETECT +#define CONFIG_CONSOLE_MUX + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 1 + +#define CONFIG_PREBOOT "" + +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +#ifdef CONFIG_CMD_SATA +#define CONFIG_DRIVE_SATA "sata " +#else +#define CONFIG_DRIVE_SATA +#endif + +#ifdef CONFIG_CMD_MMC +#define CONFIG_DRIVE_MMC "mmc " +#else +#define CONFIG_DRIVE_MMC +#endif + +#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=ttymxc1\0" \ + "clearenv=if sf probe || sf probe || sf probe 1 ; then " \ + "sf erase 0xc0000 0x2000 && " \ + "echo restored environment to factory default ; fi\0" \ + "bootcmd=for dtype in " CONFIG_DRIVE_TYPES \ + "; do " \ + "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ + "for fs in fat ext2 ; do " \ + "${fs}load " \ + "${dtype} ${disk}:1 " \ + "10008000 " \ + "/6x_bootscript" \ + "&& source 10008000 ; " \ + "done ; " \ + "done ; " \ + "done; " \ + "setenv stdout serial,vga ; " \ + "echo ; echo 6x_bootscript not found ; " \ + "echo ; echo serial console at 115200, 8N1 ; echo ; " \ + "echo details at http://boundarydevices.com/6q_bootscript ; " \ + "setenv stdout serial\0" \ + "upgradeu=for dtype in " CONFIG_DRIVE_TYPES \ + "; do " \ + "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \ + "for fs in fat ext2 ; do " \ + "${fs}load ${dtype} ${disk}:1 10008000 " \ + "/6x_upgrade " \ + "&& source 10008000 ; " \ + "done ; " \ + "done ; " \ + "done\0" \ + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "U-Boot > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 1024 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x10010000 +#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_SIZE (8 * 1024) + +/* #define CONFIG_ENV_IS_IN_MMC */ +#define CONFIG_ENV_IS_IN_SPI_FLASH + +#if defined(CONFIG_ENV_IS_IN_MMC) +#define CONFIG_ENV_OFFSET (6 * 64 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) +#define CONFIG_ENV_OFFSET (768 * 1024) +#define CONFIG_ENV_SECT_SIZE (8 * 1024) +#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS +#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE +#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#endif + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#define CONFIG_SYS_DCACHE_OFF + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#define CONFIG_CMD_BMP + +#define CONFIG_CMD_TIME +#define CONFIG_SYS_ALT_MEMTEST + +#endif /* __CONFIG_H */ diff --git a/include/configs/ns9750dev.h b/include/configs/ns9750dev.h deleted file mode 100644 index 3f49c6f0b1..0000000000 --- a/include/configs/ns9750dev.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * Markus Pietrek <mpietrek@fsforth.de> - * - * Configuation settings for the NetSilicon NS9750 DevBoard - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */ -#define CONFIG_NS9750 1 /* in an NetSilicon NS9750 SoC */ -#define CONFIG_NS9750DEV 1 /* on an NetSilicon NS9750 DevBoard */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 324403200 /* Don't use PLL. SW11-4 off */ - -#define CPU_CLK_FREQ (CONFIG_SYS_CLK_FREQ/2) -#define AHB_CLK_FREQ (CONFIG_SYS_CLK_FREQ/4) -#define BBUS_CLK_FREQ (CONFIG_SYS_CLK_FREQ/8) - -/*@TODO #define CONFIG_STATUS_LED*/ -#define CONFIG_USE_IRQ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ -#define CONFIG_NS9750_UART 1 /* use on-chip UART */ - -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 1 /* Port B */ - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BAUDRATE 38400 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_PING - - -#define CONFIG_BOOTDELAY 3 -/*#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,9600" */ - -#define CONFIG_ETHADDR 00:04:f3:ff:ff:fb /*@TODO unset */ -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_IPADDR 192.168.42.30 -#define CONFIG_SERVERIP 192.168.42.1 - -/*#define CONFIG_BOOTFILE "elinos-lart" */ -/*#define CONFIG_BOOTCOMMAND "tftp; bootm" */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -/* what's this ? it's not used anywhere */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "NS9750DEV # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00780000 /* 7,5 MB in DRAM */ /* @TODO */ - -#define CONFIG_SYS_LOAD_ADDR 0x00600000 /* default load address */ /* @TODO */ - -#define CONFIG_SYS_HZ (CPU_CLK_FREQ/64) - -#define NS9750_ETH_PHY_ADDRESS (0x0000) - -/*----------------------------------------------------------------------- - * Stack sizes - */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ -#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -/* TODO */ -#define CONFIG_NR_DRAM_BANKS 2 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x00800000 /* 8 MB */ -#define PHYS_SDRAM_2 0x10000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_2_SIZE 0x00800000 /* 8 MB */ - -#define PHYS_FLASH_1 0x50000000 /* Flash Bank #1 */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* @TODO*/ -#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */ -#if 0 -#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */ -#endif - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#ifdef CONFIG_AMD_LV800 -#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */ -#define CONFIG_SYS_MAX_FLASH_SECT (19) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */ -#endif -#ifdef CONFIG_AMD_LV400 -#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */ -#define CONFIG_SYS_MAX_FLASH_SECT (11) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */ -#endif - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -/* @TODO */ -/*#define CONFIG_ENV_IS_IN_FLASH 1*/ -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ - -#ifdef CONFIG_STATUS_LED - -extern void __led_init(led_id_t mask, int state); -extern void __led_toggle(led_id_t mask); -extern void __led_set(led_id_t mask, int state); - -#endif /* CONFIG_STATUS_LED */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 59255c4e26..48ce4c05f5 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -53,7 +53,8 @@ #define CONFIG_MISC_INIT_R -#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index 07de56567d..376a3d031e 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -90,9 +90,9 @@ /* * select serial console configuration */ -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 /* UART3 */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 +#define CONFIG_SERIAL1 1 /* UART1 */ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ @@ -102,6 +102,10 @@ #define CONFIG_OMAP_HSMMC 1 #define CONFIG_DOS_PARTITION 1 +/* silent console by default */ +#define CONFIG_SYS_DEVICE_NULLDEV 1 +#define CONFIG_SILENT_CONSOLE 1 + /* USB */ #define CONFIG_MUSB_UDC 1 #define CONFIG_USB_OMAP3 1 @@ -152,19 +156,23 @@ /* Environment information */ #undef CONFIG_ENV_OVERWRITE /* disallow overwriting serial# and ethaddr */ -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 0 +#define CONFIG_ZERO_BOOTDELAY_CHECK +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_STOP_STR "S" #define CONFIG_EXTRA_ENV_SETTINGS \ + "silent=true\0" \ "loadaddr=0x82000000\0" \ "usbtty=cdc_acm\0" \ - "console=ttyO2,115200n8\0" \ + "console=ttyO0,115200n8\0" \ "mpurate=600\0" \ "vram=12M\0" \ "dvimode=1024x768-24@60\0" \ "defaultdisplay=dvi\0" \ - "fpgafilename=mvbluelynx_x.rbf\0" \ - "loadfpga=if fatload mmc ${mmcdev} ${loadaddr} ${fpgafilename}; then " \ - "fpga load 0 ${loadaddr} ${filesize}; " \ + "loadfpga=if ext2load mmc ${mmcdev}:2 ${loadaddr} "\ + "/lib/firmware/mvblx/${fpgafilename}; then " \ + "fpga load 0 ${loadaddr} ${filesize}; " \ "fi;\0" \ "mmcdev=0\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ @@ -177,6 +185,7 @@ "omapdss.def_disp=${defaultdisplay} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype} " \ + "mvfw.fpgavers=${fpgavers} " \ "${cmdline_suffix}\0" \ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ "importbootenv=echo Importing environment from mmc ...; " \ diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index ee888418c5..b77ce25880 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -180,7 +180,8 @@ "ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \ "source ${loadaddr}; " \ "fi; " \ - "ubi part boot && ubifsmount boot && ubifsload ${loadaddr} uImage && bootm ${loadaddr}" + "ubi part boot && ubifsmount ubi:boot && " \ + "ubifsload ${loadaddr} uImage && bootm ${loadaddr}" #define CONFIG_AUTO_COMPLETE 1 /* diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index 180cb24f38..6ae6a0f435 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -52,7 +52,7 @@ #define CONFIG_MISC_INIT_R #define CONFIG_OF_LIBFDT 1 - +#define CONFIG_CMD_BOOTZ #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ #define CONFIG_SETUP_MEMORY_TAGS 1 #define CONFIG_INITRD_TAG 1 diff --git a/include/configs/omap5_common.h b/include/configs/omap5_common.h new file mode 100644 index 0000000000..af97564011 --- /dev/null +++ b/include/configs/omap5_common.h @@ -0,0 +1,262 @@ +/* + * (C) Copyright 2013 + * Texas Instruments Incorporated. + * Sricharan R <r.sricharan@ti.com> + * + * Derived from OMAP4 done by: + * Aneesh V <aneesh@ti.com> + * + * TI OMAP5 AND DRA7XX common configuration settings + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_OMAP5_COMMON_H +#define __CONFIG_OMAP5_COMMON_H + +/* + * High Level Configuration Options + */ +#define CONFIG_OMAP /* in a TI OMAP core */ +#define CONFIG_OMAP54XX /* which is a 54XX */ +#define CONFIG_OMAP_GPIO + +/* Get CPU defs */ +#include <asm/arch/cpu.h> +#include <asm/arch/omap.h> + +/* Display CPU and Board Info */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Clock Defines */ +#define V_OSCK 19200000 /* Clock output from T2 */ +#define V_SCLK V_OSCK + +#define CONFIG_MISC_INIT_R + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Size of malloc() pool + * Total Size Environment - 128k + * Malloc - add 256k + */ +#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) +/* Vector Base */ +#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE + +/* + * Hardware drivers + */ + +/* + * serial port - NS16550 compatible + */ +#define V_NS16550_CLK 48000000 + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 UART3_BASE + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ + 115200} +/* I2C */ +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_DRIVER_OMAP34XX_I2C +#define CONFIG_I2C_MULTI_BUS + + +/* MMC */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* MMC ENV related defines */ +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ +#define CONFIG_ENV_OFFSET 0xE0000 +#define CONFIG_CMD_SAVEENV + +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* Flash */ +#define CONFIG_SYS_NO_FLASH + +/* Cache */ +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_SYS_CACHELINE_SHIFT 6 + +/* commands to include */ +#include <config_cmd_default.h> + +/* Enabled commands */ +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_SAVEENV + +/* Disabled commands */ +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMLS /* List all found images */ + +/* + * Environment setup + */ + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x82000000\0" \ + "console=ttyO2,115200n8\0" \ + "usbtty=cdc_acm\0" \ + "vram=16M\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "vram=${vram} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ + "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ + "source ${loadaddr}\0" \ + "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ + "mmcboot=echo Booting from mmc${mmcdev} ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "fi; " \ + "fi; " \ + "fi" + +#define CONFIG_AUTO_COMPLETE 1 + +/* + * Miscellaneous configurable options + */ + +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_CBSIZE 256 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +/* + * memtest setup + */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20)) + +/* Default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x80000000 + +/* Use General purpose timer 1 */ +#define CONFIG_SYS_TIMERBASE GPT2_BASE +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* + * SDRAM Memory Map + * Even though we use two CS all the memory + * is mapped to one contiguous block + */ +#define CONFIG_NR_DRAM_BANKS 1 + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ + GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS + +/* Defines for SDRAM init */ +#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS +#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION +#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS +#endif + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x40300350 +#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */ +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR +#define CONFIG_SPL_DISPLAY_PRINT + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + +/* + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 80E7FFC0--0x80E80000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80E80000 + +/* + * BSS and malloc area 64MB into memory to allow enough + * space for the kernel at the beginning of memory + */ +#define CONFIG_SPL_BSS_START_ADDR 0x84000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x84100000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SPL_GPIO_SUPPORT + +#endif /* __CONFIG_OMAP5_COMMON_H */ diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h index 623da777fa..22a8e13f48 100644 --- a/include/configs/omap5_evm.h +++ b/include/configs/omap5_evm.h @@ -1,12 +1,10 @@ /* - * (C) Copyright 2010 + * (C) Copyright 2013 * Texas Instruments Incorporated. * Sricharan R <r.sricharan@ti.com> * - * Derived from OMAP4 done by: - * Aneesh V <aneesh@ti.com> - * * Configuration settings for the TI EVM5430 board. + * See omap5_common.h for omap5 common settings. * * See file CREDITS for list of people who contributed to this * project. @@ -27,242 +25,16 @@ * MA 02111-1307 USA */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */ -#define CONFIG_OMAP /* in a TI OMAP core */ -#define CONFIG_OMAP54XX /* which is a 54XX */ -#define CONFIG_OMAP5430 /* which is in a 5430 */ -#define CONFIG_5430EVM /* working with EVM */ -#define CONFIG_OMAP_GPIO - -/* Get CPU defs */ -#include <asm/arch/cpu.h> -#include <asm/arch/omap.h> - -/* Display CPU and Board Info */ -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_DISPLAY_BOARDINFO - -/* Clock Defines */ -#define V_OSCK 19200000 /* Clock output from T2 */ -#define V_SCLK V_OSCK - -#define CONFIG_MISC_INIT_R - -#define CONFIG_OF_LIBFDT - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -/* - * Size of malloc() pool - * Total Size Environment - 128k - * Malloc - add 256k - */ -#define CONFIG_ENV_SIZE (128 << 10) -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10)) -/* Vector Base */ -#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE - -/* - * Hardware drivers - */ - -/* - * serial port - NS16550 compatible - */ -#define V_NS16550_CLK 48000000 - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 UART3_BASE +#ifndef __CONFIG_OMAP5_EVM_H +#define __CONFIG_OMAP5_EVM_H -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} -/* I2C */ -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP34XX_I2C -#define CONFIG_I2C_MULTI_BUS +#include <configs/omap5_common.h> /* TWL6035 */ #ifndef CONFIG_SPL_BUILD #define CONFIG_TWL6035_POWER #endif -/* MMC */ -#define CONFIG_GENERIC_MMC -#define CONFIG_MMC -#define CONFIG_OMAP_HSMMC -#define CONFIG_DOS_PARTITION - -/* MMC ENV related defines */ -#define CONFIG_ENV_IS_IN_MMC -#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */ -#define CONFIG_ENV_OFFSET 0xE0000 -#define CONFIG_CMD_SAVEENV - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV - -/* Flash */ -#define CONFIG_SYS_NO_FLASH - -/* Cache */ -#define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_SYS_CACHELINE_SHIFT 6 - -/* commands to include */ -#include <config_cmd_default.h> - -/* Enabled commands */ -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_SAVEENV - -/* Disabled commands */ -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMLS /* List all found images */ - -/* - * Environment setup - */ - -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "console=ttyO2,115200n8\0" \ - "usbtty=cdc_acm\0" \ - "vram=16M\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "vram=${vram} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ - "source ${loadaddr}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc${mmcdev} ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "fi; " \ - "fi; " \ - "fi" - -#define CONFIG_AUTO_COMPLETE 1 - -/* - * Miscellaneous configurable options - */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "OMAP5430 EVM # " -#define CONFIG_SYS_CBSIZE 256 -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -/* - * memtest setup - */ -#define CONFIG_SYS_MEMTEST_START 0x80000000 -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20)) - -/* Default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x80000000 - -/* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT2_BASE -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/* - * SDRAM Memory Map - * Even though we use two CS all the memory - * is mapped to one contiguous block - */ -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS - -/* Defines for SDRAM init */ -#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS -#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION -#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -#endif - -/* Defines for SPL */ -#define CONFIG_SPL -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0x40300350 -#define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */ -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -#define CONFIG_SPL_DISPLAY_PRINT - -#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ -#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 -#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" - -#define CONFIG_SPL_LIBCOMMON_SUPPORT -#define CONFIG_SPL_LIBDISK_SUPPORT -#define CONFIG_SPL_I2C_SUPPORT -#define CONFIG_SPL_MMC_SUPPORT -#define CONFIG_SPL_FAT_SUPPORT -#define CONFIG_SPL_LIBGENERIC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" - -/* - * 64 bytes before this address should be set aside for u-boot.img's - * header. That is 80E7FFC0--0x80E80000 should not be used for any - * other needs. - */ -#define CONFIG_SYS_TEXT_BASE 0x80E80000 - -/* - * BSS and malloc area 64MB into memory to allow enough - * space for the kernel at the beginning of memory - */ -#define CONFIG_SPL_BSS_START_ADDR 0x84000000 -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SYS_SPL_MALLOC_START 0x84100000 -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */ -#endif /* __CONFIG_H */ +#endif /* __CONFIG_OMAP5_EVM_H */ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 2edb4aaba9..eac1ef9e02 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -44,14 +44,6 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_FS_EXT4 -#define CONFIG_FS_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC - /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index aa90ba9c5d..d0ea74e0b4 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -21,8 +21,7 @@ #define CONFIG_AM33XX -#include <asm/arch/cpu.h> -#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> #define CONFIG_DMA_COHERENT #define CONFIG_DMA_COHERENT_SIZE (1 << 20) @@ -234,7 +233,7 @@ #define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 -#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" /* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h index 671e9eb1e5..306abcc8e1 100644 --- a/include/configs/pdm360ng.h +++ b/include/configs/pdm360ng.h @@ -68,7 +68,6 @@ #define CONFIG_SYS_MPC512X_CLKIN 33333333 /* in Hz */ -#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R #define CONFIG_SYS_IMMR 0x80000000 @@ -206,6 +205,9 @@ #define CONFIG_SYS_SRAM_BASE 0x50000000 #define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ +#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH1_BASE +#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_FLASH_SIZE + /* ALE active low, data size 4 bytes */ #define CONFIG_SYS_CS0_CFG 0x05059350 /* ALE active low, data size 4 bytes */ @@ -213,6 +215,9 @@ #define CONFIG_SYS_MRAM_BASE 0x50040000 #define CONFIG_SYS_MRAM_SIZE 0x00020000 +#define CONFIG_SYS_CS2_START CONFIG_SYS_MRAM_BASE +#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_MRAM_SIZE + /* ALE active low, data size 4 bytes */ #define CONFIG_SYS_CS2_CFG 0x05059110 @@ -296,6 +301,23 @@ #define CONSOLE_FIFO_RX_ADDR FIFOC_PSC6_RX_ADDR /* + * Clocks in use + */ +#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ + CLOCK_SCCR1_LPC_EN | \ + CLOCK_SCCR1_NFC_EN | \ + CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ + CLOCK_SCCR1_PSCFIFO_EN | \ + CLOCK_SCCR1_DDR_EN | \ + CLOCK_SCCR1_FEC_EN | \ + CLOCK_SCCR1_TPR_EN) + +#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ + CLOCK_SCCR2_SPDIF_EN | \ + CLOCK_SCCR2_DIU_EN | \ + CLOCK_SCCR2_I2C_EN) + +/* * Used PSC UART devices */ #define CONFIG_SYS_PSC1 diff --git a/include/configs/plutux.h b/include/configs/plutux.h index deee237879..4cfe88a5e7 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -65,11 +65,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - #define CONFIG_FIT #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h index cf62e45e8b..3d55d36c6e 100644 --- a/include/configs/rpi_b.h +++ b/include/configs/rpi_b.h @@ -23,6 +23,7 @@ #define CONFIG_ARM1176 #define CONFIG_BCM2835 #define CONFIG_ARCH_CPU_INIT +#define CONFIG_SYS_DCACHE_OFF /* * 2835 is a SKU in a series for which the 2708 is the first or primary SoC, * so 2708 has historically been used rather than a dedicated 2835 ID. @@ -50,6 +51,7 @@ #define CONFIG_SYS_MALLOC_LEN SZ_4M #define CONFIG_SYS_MEMTEST_START 0x00100000 #define CONFIG_SYS_MEMTEST_END 0x00200000 +#define CONFIG_LOADADDR 0x00200000 /* Flash */ #define CONFIG_SYS_NO_FLASH @@ -57,6 +59,24 @@ /* Devices */ /* GPIO */ #define CONFIG_BCM2835_GPIO +/* LCD */ +#define CONFIG_LCD +#define LCD_BPP LCD_COLOR16 +/* + * Prevent allocation of RAM for FB; the real FB address is queried + * dynamically from the VideoCore co-processor, and comes from RAM + * not owned by the ARM CPU. + */ +#define CONFIG_FB_ADDR 0 +#define CONFIG_VIDEO_BCM2835 +#define CONFIG_SYS_WHITE_ON_BLACK + +/* SD/MMC configuration */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_SDHCI +#define CONFIG_MMC_SDHCI_IO_ACCESSORS +#define CONFIG_BCM2835_SDHCI /* Console UART */ #define CONFIG_PL011_SERIAL @@ -73,7 +93,59 @@ /* Environment */ #define CONFIG_ENV_SIZE SZ_16K #define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_SYS_LOAD_ADDR 0x1000000 +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +/* + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it low in memory to avoid conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "stdin=serial\0" \ + "stderr=serial,lcd\0" \ + "stdout=serial,lcd\0" \ + "scriptaddr=0x00000000\0" \ + "kernel_addr_r=0x01000000\0" \ + "fdt_addr_r=0x02000000\0" \ + "ramdisk_addr_r=0x02100000\0" \ + "boot_targets=mmc0\0" \ + \ + "script_boot=" \ + "if fatload ${devtype} ${devnum}:1 " \ + "${scriptaddr} boot.scr.uimg; then " \ + "source ${scriptaddr}; " \ + "fi;\0" \ + \ + "mmc_boot=" \ + "setenv devtype mmc; " \ + "if mmc dev ${devnum}; then " \ + "run script_boot; " \ + "fi\0" \ + \ + "bootcmd_mmc0=setenv devnum 0; run mmc_boot\0" \ + +#define CONFIG_BOOTCOMMAND \ + "for target in ${boot_targets}; do run bootcmd_${target}; done" + +#define CONFIG_BOOTDELAY 2 /* Shell */ #define CONFIG_SYS_HUSH_PARSER @@ -88,6 +160,13 @@ #include <config_cmd_default.h> #define CONFIG_CMD_BOOTZ #define CONFIG_CMD_GPIO +#define CONFIG_CMD_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_PARTITION_UUIDS +#define CONFIG_CMD_PART +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT /* Some things don't make sense on this HW or yet */ #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_NET diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 9c431bf27a..406da43aa1 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -32,6 +32,13 @@ #define CONFIG_OF_LIBFDT #define CONFIG_LMB +#define CONFIG_FS_FAT +#define CONFIG_FS_EXT4 +#define CONFIG_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE + #define CONFIG_SYS_VSNPRINTF #define CONFIG_CMD_GPIO @@ -63,8 +70,8 @@ #define CONFIG_SYS_HZ 1000 /* Memory things - we don't really want a memory test */ -#define CONFIG_SYS_LOAD_ADDR 0x10000000 -#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_LOAD_ADDR 0x00000000 +#define CONFIG_SYS_MEMTEST_START 0x00100000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1000) #define CONFIG_PHYS_64BIT @@ -85,6 +92,13 @@ #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS +#define CONFIG_CMD_HASH +#define CONFIG_HASH_VERIFY +#define CONFIG_SHA1 +#define CONFIG_SHA256 + +#define CONFIG_CMD_SANDBOX + #define CONFIG_BOOTARGS "" #define CONFIG_EXTRA_ENV_SETTINGS "stdin=serial\0" \ diff --git a/include/configs/sc_sps_1.h b/include/configs/sc_sps_1.h index decf8d9dec..349497f67a 100644 --- a/include/configs/sc_sps_1.h +++ b/include/configs/sc_sps_1.h @@ -170,7 +170,8 @@ #ifdef CONFIG_CMD_USB #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_MXS -#define CONFIG_EHCI_MXS_PORT 0 +#define CONFIG_EHCI_MXS_PORT0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_STORAGE #endif diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index de0c777819..f66173e0f2 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -70,14 +70,6 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_FS_EXT4 -#define CONFIG_FS_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC - /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET ((512 * 1024) - CONFIG_ENV_SIZE) diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h index c50832c1e0..bbf9da545b 100644 --- a/include/configs/suvd3.h +++ b/include/configs/suvd3.h @@ -110,4 +110,41 @@ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U +/* + * QE UEC ethernet configuration + */ +#if defined(CONFIG_KMVECT1) +#define CONFIG_MV88E6352_SWITCH +#define CONFIG_KM_MVEXTSW_ADDR 0x10 + +/* ethernet port connected to simple switch 88e6122 (UEC0) */ +#define CONFIG_UEC_ETH1 +#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9 +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10 + +#define CONFIG_FIXED_PHY 0xFFFFFFFF +#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */ +#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \ + {devnum, speed, duplex} +#define CONFIG_SYS_FIXED_PHY_PORTS \ + CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL) + +#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR +#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII +#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 + +/* ethernet port connected to piggy (UEC2) */ +#define CONFIG_HAS_ETH1 +#define CONFIG_UEC_ETH2 +#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */ +#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ +#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12 +#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC2_PHY_ADDR 0 +#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII +#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 +#endif /* CONFIG_KMVECT1 */ + #endif /* __CONFIG_H */ diff --git a/include/configs/tec.h b/include/configs/tec.h index caeb9cd8a8..f90f5c7526 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -73,11 +73,6 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT - #define CONFIG_FIT #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 4a656bb51b..036ded0c79 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -21,8 +21,8 @@ * MA 02111-1307 USA */ -#ifndef __TEGRA_COMMON_H -#define __TEGRA_COMMON_H +#ifndef _TEGRA_COMMON_H_ +#define _TEGRA_COMMON_H_ #include <asm/sizes.h> #include <linux/stringify.h> @@ -56,10 +56,8 @@ #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */ /* - * PllX Configuration + * NS16550 Configuration */ -#define CONFIG_SYS_CPU_OSC_FREQUENCY 1000000 /* Set CPU clock to 1GHz */ - #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE (-4) @@ -90,6 +88,18 @@ #define CONFIG_COMMAND_HISTORY #define CONFIG_AUTO_COMPLETE +/* turn on commonly used storage-related commands */ + +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_PARTITION_UUIDS +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_PART + #define CONFIG_SYS_NO_FLASH #define CONFIG_CONSOLE_MUX @@ -157,4 +167,8 @@ #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SYS_GENERIC_BOARD +/* Misc utility code */ +#define CONFIG_BOUNCE_BUFFER + #endif /* _TEGRA_COMMON_H_ */ diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index 003353040e..c2986d8309 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -76,4 +76,7 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra114/u-boot-spl.lds" +/* Total I2C ports on Tegra114 */ +#define TEGRA_I2C_NUM_CONTROLLERS 5 + #endif /* _TEGRA114_COMMON_H_ */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 33e5f524f1..395a657584 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -26,6 +26,13 @@ #include "tegra-common.h" /* + * Errata configuration + */ +#define CONFIG_ARM_ERRATA_716044 +#define CONFIG_ARM_ERRATA_742230 +#define CONFIG_ARM_ERRATA_751472 + +/* * NS16550 Configuration */ #define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */ @@ -108,13 +115,7 @@ /* Total I2C ports on Tegra20 */ #define TEGRA_I2C_NUM_CONTROLLERS 4 -#define CONFIG_PARTITION_UUIDS -#define CONFIG_CMD_PART - #define CONFIG_SYS_NAND_SELF_INIT #define CONFIG_SYS_NAND_ONFI_DETECTION -/* Misc utility code */ -#define CONFIG_BOUNCE_BUFFER - #endif /* _TEGRA20_COMMON_H_ */ diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h index 04517e1409..f6c07c6ecc 100644 --- a/include/configs/tegra30-common.h +++ b/include/configs/tegra30-common.h @@ -26,6 +26,12 @@ #include "tegra-common.h" /* + * Errata configuration + */ +#define CONFIG_ARM_ERRATA_743622 +#define CONFIG_ARM_ERRATA_751472 + +/* * NS16550 Configuration */ #define V_NS16550_CLK 408000000 /* 408MHz (pllp_out0) */ diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h new file mode 100644 index 0000000000..16547e3314 --- /dev/null +++ b/include/configs/ti814x_evm.h @@ -0,0 +1,221 @@ +/* + * ti814x_evm.h + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __CONFIG_TI814X_EVM_H +#define __CONFIG_TI814X_EVM_H + +#define CONFIG_TI81XX +#define CONFIG_TI814X +#define CONFIG_SYS_NO_FLASH + +#include <asm/arch/omap.h> + +#define CONFIG_DMA_COHERENT +#define CONFIG_DMA_COHERENT_SIZE (1 << 20) + +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_SYS_MALLOC_LEN (1024 << 10) +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* Use HUSH for command parsing */ +#define CONFIG_SYS_PROMPT "U-Boot# " +#define CONFIG_SYS_NO_FLASH +#define CONFIG_MACH_TYPE MACH_TYPE_TI8148EVM + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG /* for ramdisk support */ + +/* commands to include */ +# include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_VERSION_VARIABLE + +#define CONFIG_BOOTDELAY 1 /* negative for no autoboot */ +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x80200000\0" \ + "fdtaddr=0x80F80000\0" \ + "rdaddr=0x81000000\0" \ + "bootfile=/boot/uImage\0" \ + "fdtfile=\0" \ + "console=ttyO0,115200n8\0" \ + "optargs=\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 ro\0" \ + "mmcrootfstype=ext4 rootwait\0" \ + "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ + "ramrootfstype=ext2\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "bootenv=uEnv.txt\0" \ + "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t $loadaddr $filesize\0" \ + "ramargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${ramroot} " \ + "rootfstype=${ramrootfstype}\0" \ + "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ + "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ + "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "ramboot=echo Booting from ramdisk ...; " \ + "run ramargs; " \ + "bootm ${loadaddr}\0" \ + "fdtfile=ti814x-evm.dtb\0" \ + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run loaduimage; then " \ + "run mmcboot;" \ + "fi;" \ + "fi;" \ + +/* Clock Defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#define CONFIG_CMD_ECHO + +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \ + + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_MEMTEST_START PHYS_DRAM_1 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \ + + PHYS_DRAM_1_SIZE - (8 << 12)) + +#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default */ +#define CONFIG_SYS_HZ 1000 /* 1ms clock */ + +#define CONFIG_OMAP_GPIO +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_CMD_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 + +/** + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* 1 banks of DRAM */ +#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ +#define PHYS_DRAM_1_SIZE 0x20000000 /* 512MB */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1024MB */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1 +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \ + GENERATED_GBL_DATA_SIZE) + +/** + * Platform/Board specific defs + */ +#define CONFIG_SYS_TIMERBASE 0x4802E000 +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK (48000000) +#define CONFIG_SYS_NS16550_COM1 0x48020000 /* Base EVM has UART0 */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_CONSOLE_INFO_QUIET + +#define CONFIG_ENV_IS_NOWHERE + +/* Defines for SPL */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x40300000 +#define CONFIG_SPL_MAX_SIZE ((128 - 18) * 1024) +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR + +#define CONFIG_SPL_BSS_START_ADDR 0x80000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */ + +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ +#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_FAT_SUPPORT + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_YMODEM_SUPPORT +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" + +#define CONFIG_SPL_BOARD_INIT + +/* + * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM + * 64 bytes before this address should be set aside for u-boot.img's + * header. That is 0x800FFFC0--0x80800000 should not be used for any + * other needs. + */ +#define CONFIG_SYS_TEXT_BASE 0x80800000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80208000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 + +/* + * Since SPL did pll and ddr initialization for us, + * we don't need to do it twice. + */ +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +/* Unsupported features */ +#undef CONFIG_USE_IRQ + +#endif /* ! __CONFIG_TI814X_EVM_H */ diff --git a/include/configs/trats.h b/include/configs/trats.h index 63745ac8f1..31d81901bc 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -316,4 +316,9 @@ #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 120 * 4) + (1 << 12)) +#define CONFIG_CMD_USB_MASS_STORAGE +#if defined(CONFIG_CMD_USB_MASS_STORAGE) +#define CONFIG_USB_GADGET_MASS_STORAGE +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 1a665ac3ac..ebd7a257f3 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -193,7 +193,7 @@ "bootm ${loadaddr}\0" \ "loaduimage_ubi=mtd default; " \ "ubi part fs; " \ - "ubifsmount root; " \ + "ubifsmount ubi:root; " \ "ubifsload ${loadaddr} /boot/uImage\0" \ "nandboot=echo Booting from nand ...; " \ "run nandargs; " \ diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index 334d3a3b8b..0644f7a5b8 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -67,14 +67,6 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_FS_EXT4 -#define CONFIG_FS_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC - /* Environment in SPI */ #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SPI_MAX_HZ 48000000 diff --git a/include/configs/tuxx1.h b/include/configs/tuxx1.h index 90d2e61147..6caf23a478 100644 --- a/include/configs/tuxx1.h +++ b/include/configs/tuxx1.h @@ -11,7 +11,7 @@ * (C) Copyright 2008 * Heiko Schocher, DENX Software Engineering, hs@denx.de. * - * (C) Copyright 2010-2012 + * (C) Copyright 2010-2013 * Lukas Roggli, KEYMILE Ltd, lukas.roggli@keymile.com * Holger Brunck, Keymile GmbH, holger.bruncl@keymile.com * @@ -27,16 +27,20 @@ /* * High Level Configuration Options */ -#ifdef CONFIG_KMSUPX5 +#if defined(CONFIG_KMSUPX5) #define CONFIG_KM_BOARD_NAME "kmsupx5" #define CONFIG_HOSTNAME kmsupx5 -#elif defined CONFIG_TUGE1 +#elif defined(CONFIG_TUGE1) #define CONFIG_KM_BOARD_NAME "tuge1" #define CONFIG_HOSTNAME tuge1 -#else -#define CONFIG_TUXXX /* TUXX1 board (tuxa1/tuda1) specific */ +#elif defined(CONFIG_TUXX1) /* TUXX1 board (tuxa1/tuda1) specific */ #define CONFIG_KM_BOARD_NAME "tuxx1" #define CONFIG_HOSTNAME tuxx1 +#elif defined(CONFIG_KMOPTI2) +#define CONFIG_KM_BOARD_NAME "kmopti2" +#define CONFIG_HOSTNAME kmopti2 +#else +#error ("Board not supported") #endif #define CONFIG_SYS_TEXT_BASE 0xF0000000 @@ -46,18 +50,18 @@ #define CONFIG_SYS_APP1_BASE 0xA0000000 /* PAXG */ #define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ -#ifndef CONFIG_KM_DISABLE_APP2 +#if defined(CONFIG_TUXX1) || defined(CONFIG_KMOPTI2) #define CONFIG_SYS_APP2_BASE 0xB0000000 /* PINC3 */ #define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ #endif /* * Init Local Bus Memory Controller: - * - * Bank Bus Machine PortSz Size Device on TUDA1 TUXA1 TUGE1 KMSUPX4 - * ---- --- ------- ------ ----- --------------------------------------- - * 2 Local GPCM 8 bit 256MB PAXG LPXF PAXI LPXF - * 3 Local GPCM 8 bit 256MB PINC3 PINC2 unused unused + * Device on + * Bank Bus Machine PortSz Size TUDA1 TUXA1 TUGE1 KMSUPX4 KMOPTI2 + * ---- --- ------- ------ ----- --------------------------------------- + * 2 Local GPCM 8 bit 256MB PAXG LPXF PAXI LPXF PAXE + * 3 Local GPCM 8 bit 256MB PINC3 PINC2 unused unused OPI2(16 bit) * */ @@ -81,7 +85,7 @@ OR_GPCM_TRLX_SET | \ OR_GPCM_EHTR_CLEAR | \ OR_GPCM_EAD) -#ifndef CONFIG_KM_DISABLE_APP2 +#if defined(CONFIG_TUXX1) /* * Configuration for C3 on the local bus */ @@ -107,6 +111,22 @@ MxMR_WLFx_2X) #endif +#if defined(CONFIG_KMOPTI2) +/* + * Configuration for C3 on the local bus + */ +#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_APP2_BASE +#define CONFIG_SYS_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_256MB) +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_APP2_BASE | \ + BR_PS_16 | \ + BR_MS_GPCM | \ + BR_V) +#define CONFIG_SYS_OR3_PRELIM (MEG_TO_AM(CONFIG_SYS_APP2_SIZE) | \ + OR_GPCM_SCY_4 | \ + OR_GPCM_TRLX_CLEAR | \ + OR_GPCM_EHTR_CLEAR) +#endif + /* * MMU Setup */ @@ -125,7 +145,7 @@ BATL_GUARDEDSTORAGE) #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U -#ifdef CONFIG_KM_DISABLE_APP2 +#if defined(CONFIG_TUGE1) || defined(CONFIG_KMSUPX5) #define CONFIG_SYS_IBAT6L (0) #define CONFIG_SYS_IBAT6U (0) #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L diff --git a/include/configs/twister.h b/include/configs/twister.h index a8524816a8..4205a11bca 100644 --- a/include/configs/twister.h +++ b/include/configs/twister.h @@ -58,7 +58,6 @@ #define CONFIG_CMD_SPL_NAND_OFS (CONFIG_SYS_NAND_SPL_KERNEL_OFFS+\ 0x600000) #define CONFIG_SPL_OS_BOOT -#define CONFIG_SPL_OS_BOOT_KEY 55 #define CONFIG_SYS_SPL_ARGS_ADDR (PHYS_SDRAM_1 + 0x100) #define CONFIG_SPL_BOARD_INIT diff --git a/include/configs/ventana.h b/include/configs/ventana.h index b55ebc9bfc..5755f11714 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -50,14 +50,6 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_FS_EXT4 -#define CONFIG_FS_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC - /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC #define CONFIG_ENV_OFFSET ((1024 * 1024) - CONFIG_ENV_SIZE) diff --git a/include/configs/whistler.h b/include/configs/whistler.h index 1e554d8164..9542c7e213 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -59,14 +59,6 @@ #define CONFIG_TEGRA_MMC #define CONFIG_CMD_MMC -#define CONFIG_DOS_PARTITION -#define CONFIG_EFI_PARTITION -#define CONFIG_FS_EXT4 -#define CONFIG_FS_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_FS_GENERIC - /* * Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes * the user plugged the standard 8MB MoviNAND card into J29/HSMMC/POP. If diff --git a/include/configs/x600.h b/include/configs/x600.h index 3082aaa1e6..bb495a1c90 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -262,7 +262,7 @@ "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \ " addcon addmisc addmtd;" \ "bootm ${kernel_addr} - ${dtb_addr}\0" \ - "ubifs_mount=ubi part ubi${boot_part};ubifsmount rootfs\0" \ + "ubifs_mount=ubi part ubi${boot_part};ubifsmount ubi:rootfs\0" \ "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \ "ubifsload ${dtb_addr} ${dtb_fs};\0" \ "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \ diff --git a/include/configs/zynq.h b/include/configs/zynq.h index 18fd76f47e..2989e723e0 100644 --- a/include/configs/zynq.h +++ b/include/configs/zynq.h @@ -58,6 +58,11 @@ #define CONFIG_ZYNQ_GEM #define CONFIG_ZYNQ_GEM_BASEADDR0 0xE000B000 +#if defined(CONFIG_ZYNQ_DCC) +# define CONFIG_ARM_DCC +# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */ +#endif + #define CONFIG_BOOTP_SERVERIP #define CONFIG_BOOTP_BOOTPATH #define CONFIG_BOOTP_GATEWAY diff --git a/include/env_callback.h b/include/env_callback.h index c583120c1c..e89b6dadc9 100644 --- a/include/env_callback.h +++ b/include/env_callback.h @@ -41,6 +41,12 @@ #define SILENT_CALLBACK #endif +#ifdef CONFIG_SPLASHIMAGE_GUARD +#define SPLASHIMAGE_CALLBACK "splashimage:splashimage," +#else +#define SPLASHIMAGE_CALLBACK +#endif + /* * This list of callback bindings is static, but may be overridden by defining * a new association in the ".callbacks" environment variable. @@ -51,6 +57,7 @@ "bootfile:bootfile," \ "loadaddr:loadaddr," \ SILENT_CALLBACK \ + SPLASHIMAGE_CALLBACK \ "stdin:console,stdout:console,stderr:console," \ CONFIG_ENV_CALLBACK_LIST_STATIC @@ -76,7 +83,7 @@ void env_callback_init(ENTRY *var_entry); } #else #define U_BOOT_ENV_CALLBACK(name, callback) \ - ll_entry_declare(struct env_clbk_tbl, name, env_clbk, env_clbk) = \ + ll_entry_declare(struct env_clbk_tbl, name, env_clbk) = \ {#name, callback} #endif diff --git a/include/exports.h b/include/exports.h index 6cf31aa5e7..41d5085e16 100644 --- a/include/exports.h +++ b/include/exports.h @@ -24,6 +24,7 @@ int setenv (const char *varname, const char *varvalue); long simple_strtol(const char *cp,char **endp,unsigned int base); int strcmp(const char * cs,const char * ct); unsigned long ustrtoul(const char *cp, char **endp, unsigned int base); +unsigned long long ustrtoull(const char *cp, char **endp, unsigned int base); #if defined(CONFIG_CMD_I2C) int i2c_write (uchar, uint, int , uchar* , int); int i2c_read (uchar, uint, int , uchar* , int); diff --git a/include/ext4fs.h b/include/ext4fs.h index 3b59d15aab..025a2e89c2 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -138,4 +138,7 @@ void ext4fs_free_node(struct ext2fs_node *node, struct ext2fs_node *currroot); int ext4fs_devread(int sector, int byte_offset, int byte_len, char *buf); void ext4fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info); long int read_allocated_block(struct ext2_inode *inode, int fileblock); +int ext4fs_probe(block_dev_desc_t *fs_dev_desc, + disk_partition_t *fs_partition); +int ext4_read_file(const char *filename, void *buf, int offset, int len); #endif diff --git a/include/fat.h b/include/fat.h index b28c3fd668..9701323748 100644 --- a/include/fat.h +++ b/include/fat.h @@ -213,4 +213,6 @@ int fat_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info); int fat_register_device(block_dev_desc_t *dev_desc, int part_no); int file_fat_write(const char *filename, void *buffer, unsigned long maxsize); +int fat_read_file(const char *filename, void *buf, int offset, int len); +void fat_close(void); #endif /* _FAT_H_ */ diff --git a/include/fdtdec.h b/include/fdtdec.h index 6552942116..4fd1b670dc 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -62,6 +62,7 @@ struct fdt_memory { enum fdt_compat_id { COMPAT_UNKNOWN, COMPAT_NVIDIA_TEGRA20_USB, /* Tegra20 USB port */ + COMPAT_NVIDIA_TEGRA114_I2C, /* Tegra114 I2C w/single clock source */ COMPAT_NVIDIA_TEGRA20_I2C, /* Tegra20 i2c */ COMPAT_NVIDIA_TEGRA20_DVC, /* Tegra20 dvc (really just i2c) */ COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */ @@ -70,6 +71,8 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */ COMPAT_NVIDIA_TEGRA20_PWM, /* Tegra 2 PWM controller */ COMPAT_NVIDIA_TEGRA20_DC, /* Tegra 2 Display controller */ + COMPAT_NVIDIA_TEGRA30_SDMMC, /* Tegra30 SDMMC controller */ + COMPAT_NVIDIA_TEGRA20_SDMMC, /* Tegra20 SDMMC controller */ COMPAT_NVIDIA_TEGRA20_SFLASH, /* Tegra 2 SPI flash controller */ COMPAT_NVIDIA_TEGRA20_SLINK, /* Tegra 2 SPI SLINK controller */ COMPAT_SMSC_LAN9215, /* SMSC 10/100 Ethernet LAN9215 */ diff --git a/include/fs.h b/include/fs.h index 4f30a385a0..b6d69e5ced 100644 --- a/include/fs.h +++ b/include/fs.h @@ -21,6 +21,7 @@ #define FS_TYPE_ANY 0 #define FS_TYPE_FAT 1 #define FS_TYPE_EXT 2 +#define FS_TYPE_SANDBOX 3 /* * Tell the fs layer which block device an partition to use for future diff --git a/include/hash.h b/include/hash.h index 34ba558bd0..2dbbd9b7d5 100644 --- a/include/hash.h +++ b/include/hash.h @@ -22,7 +22,7 @@ #ifndef _HASH_H #define _HASH_H -#ifdef CONFIG_SHA1SUM_VERIFY +#if defined(CONFIG_SHA1SUM_VERIFY) || defined(CONFIG_CRC32_VERIFY) #define CONFIG_HASH_VERIFY #endif @@ -51,19 +51,24 @@ struct hash_algo { */ #define HASH_MAX_DIGEST_SIZE 32 +enum { + HASH_FLAG_VERIFY = 1 << 0, /* Enable verify mode */ + HASH_FLAG_ENV = 1 << 1, /* Allow env vars */ +}; + /** * hash_command: Process a hash command for a particular algorithm * * This common function is used to implement specific hash commands. * - * @algo_name: Hash algorithm being used - * @verify: Non-zero to enable verify mode + * @algo_name: Hash algorithm being used (lower case!) + * @flags: Flags value (HASH_FLAG_...) * @cmdtp: Pointer to command table entry * @flag: Some flags normally 0 (see CMD_FLAG_.. above) * @argc: Number of arguments (arg 0 must be the command text) * @argv: Arguments */ -int hash_command(const char *algo_name, int verify, cmd_tbl_t *cmdtp, int flag, +int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); #endif diff --git a/include/ide.h b/include/ide.h index 158e1beaf9..afea85cdc2 100644 --- a/include/ide.h +++ b/include/ide.h @@ -85,4 +85,11 @@ void ide_output_data(int dev, const ulong *sect_buf, int words); void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts); void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts); +/** + * board_start_ide() - Start up the board IDE interfac + * + * @return 0 if ok + */ +int board_start_ide(void); + #endif /* _IDE_H */ diff --git a/include/initcall.h b/include/initcall.h new file mode 100644 index 0000000000..9e54fa5c26 --- /dev/null +++ b/include/initcall.h @@ -0,0 +1,25 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +typedef int (*init_fnc_t)(void); + +int initcall_run_list(init_fnc_t init_sequence[]); diff --git a/include/lcd.h b/include/lcd.h index c24164a9de..4ac4ddd1e0 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -47,6 +47,7 @@ extern struct vidinfo panel_info; extern void lcd_ctrl_init (void *lcdbase); extern void lcd_enable (void); +extern int board_splash_screen_prepare(void); /* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */ extern void lcd_setcolreg (ushort regno, diff --git a/include/linker_lists.h b/include/linker_lists.h index 0b405d78ea..6c28bf961b 100644 --- a/include/linker_lists.h +++ b/include/linker_lists.h @@ -13,6 +13,96 @@ * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. */ + +/* + * There is no use in including this from ASM files, but that happens + * anyway, e.g. PPC kgdb.S includes command.h which incluse us. + * So just don't define anything when included from ASM. + */ + +#if !defined(__ASSEMBLY__) + +/** + * A linker list is constructed by grouping together linker input + * sections, each containning one entry of the list. Each input section + * contains a constant initialized variable which holds the entry's + * content. Linker list input sections are constructed from the list + * and entry names, plus a prefix which allows grouping all lists + * together. Assuming _list and _entry are the list and entry names, + * then the corresponding input section name is + * + * _u_boot_list + _2_ + @_list + _2_ + @_entry + * + * and the C variable name is + * + * .u_boot_list_ + 2_ + @_list + _2_ + @_entry + * + * This ensures uniqueness for both input section and C variable name. + * + * Note that the names differ only in the first character, "." for the + * setion and "_" for the variable, so that the linker cannot confuse + * section and symbol names. From now on, both names will be referred + * to as + * + * %u_boot_list_ + 2_ + @_list + _2_ + @_entry + * + * Entry variables need never be referred to directly. + * + * The naming scheme for input sections allows grouping all linker lists + * into a single linker output section and grouping all entries for a + * single list. + * + * Note the two '_2_' constant components in the names: their presence + * allows putting a start and end symbols around a list, by mapping + * these symbols to sections names with components "1" (before) and + * "3" (after) instead of "2" (within). + * Start and end symbols for a list can generally be defined as + * + * %u_boot_list_2_ + @_list + _1_... + * %u_boot_list_2_ + @_list + _3_... + * + * Start and end symbols for the whole of the linker lists area can be + * defined as + * + * %u_boot_list_1_... + * %u_boot_list_3_... + * + * Here is an example of the sorted sections which result from a list + * "array" made up of three entries : "first", "second" and "third", + * iterated at least once. + * + * .u_boot_list_2_array_1 + * .u_boot_list_2_array_2_first + * .u_boot_list_2_array_2_second + * .u_boot_list_2_array_2_third + * .u_boot_list_2_array_3 + * + * If lists must be divided into sublists (e.g. for iterating only on + * part of a list), one can simply give the list a name of the form + * 'outer_2_inner', where 'outer' is the global list name and 'inner' + * is the sub-list name. Iterators for the whole list should use the + * global list name ("outer"); iterators for only a sub-list should use + * the full sub-list name ("outer_2_inner"). + * + * Here is an example of the sections generated from a global list + * named "drivers", two sub-lists named "i2c" and "pci", and iterators + * defined for the whole list and each sub-list: + * + * %u_boot_list_2_drivers_1 + * %u_boot_list_2_drivers_2_i2c_1 + * %u_boot_list_2_drivers_2_i2c_2_first + * %u_boot_list_2_drivers_2_i2c_2_first + * %u_boot_list_2_drivers_2_i2c_2_second + * %u_boot_list_2_drivers_2_i2c_2_third + * %u_boot_list_2_drivers_2_i2c_3 + * %u_boot_list_2_drivers_2_pci_1 + * %u_boot_list_2_drivers_2_pci_2_first + * %u_boot_list_2_drivers_2_pci_2_second + * %u_boot_list_2_drivers_2_pci_2_third + * %u_boot_list_2_drivers_2_pci_3 + * %u_boot_list_2_drivers_3 + */ + #ifndef __LINKER_LISTS_H__ #define __LINKER_LISTS_H__ @@ -20,43 +110,28 @@ * ll_entry_declare() - Declare linker-generated array entry * @_type: Data type of the entry * @_name: Name of the entry - * @_section_u: Subsection of u_boot_list in which this entry is placed - * (with underscores instead of dots, for name concatenation) - * @_section_d: Subsection of u_boot_list in which this entry is placed - * (with dots, for section concatenation) + * @_list: name of the list. Should contain only characters allowed + * in a C variable name! * * This macro declares a variable that is placed into a linker-generated * array. This is a basic building block for more advanced use of linker- * generated arrays. The user is expected to build their own macro wrapper * around this one. * - * A variable declared using this macro must be compile-time initialized - * and is as such placed into subsection of special section, .u_boot_list. - * The subsection is specified by the _section_[u,d] parameter, see below. - * The base name of the variable is _name, yet the actual variable is - * declared as concatenation of - * - * %_u_boot_list_ + @_section_u + _ + @_name - * - * which ensures name uniqueness. This variable shall never be refered - * directly though. + * A variable declared using this macro must be compile-time initialized. * * Special precaution must be made when using this macro: - * 1) The _type must not contain the "static" keyword, otherwise the entry - * is not generated. * - * 2) The @_section_u and @_section_d variables must match, the only difference - * is that in @_section_u is every dot "." character present in @_section_d - * replaced by a single underscore "_" character in @_section_u. The actual - * purpose of these parameters is to select proper subsection in the global - * .u_boot_list section. + * 1) The _type must not contain the "static" keyword, otherwise the + * entry is generated and can be iterated but is listed in the map + * file and cannot be retrieved by name. * - * 3) In case a section is declared that contains some array elements AND a - * subsection of this section is declared and contains some elements, it is - * imperative that the elements are of the same type. + * 2) In case a section is declared that contains some array elements AND + * a subsection of this section is declared and contains some elements, + * it is imperative that the elements are of the same type. * * 4) In case an outer section is declared that contains some array elements - * AND am inner subsection of this section is declared and contains some + * AND an inner subsection of this section is declared and contains some * elements, then when traversing the outer section, even the elements of * the inner sections are present in the array. * @@ -66,39 +141,71 @@ * .y = 4, * }; */ -#define ll_entry_declare(_type, _name, _section_u, _section_d) \ - _type _u_boot_list_##_section_u##_##_name __attribute__(( \ - unused, aligned(4), \ - section(".u_boot_list."#_section_d"."#_name))) +#define ll_entry_declare(_type, _name, _list) \ + _type _u_boot_list_2_##_list##_2_##_name __aligned(4) \ + __attribute__((unused, \ + section(".u_boot_list_2_"#_list"_2_"#_name))) + +/** + * We need a 0-byte-size type for iterator symbols, and the compiler + * does not allow defining objects of C type 'void'. Using an empty + * struct is allowed by the compiler, but causes gcc versions 4.4 and + * below to complain about aliasing. Therefore we use the next best + * thing: zero-sized arrays, which are both 0-byte-size and exempt from + * aliasing warnings. + */ /** * ll_entry_start() - Point to first entry of linker-generated array * @_type: Data type of the entry - * @_section_u: Subsection of u_boot_list in which this entry is placed - * (with underscores instead of dots) + * @_list: Name of the list in which this entry is placed * * This function returns (_type *) pointer to the very first entry of a * linker-generated array placed into subsection of .u_boot_list section - * specified by _section_u argument. + * specified by _list argument. + * + * Since this macro defines an array start symbol, its leftmost index + * must be 2 and its rightmost index must be 1. * * Example: * struct my_sub_cmd *msc = ll_entry_start(struct my_sub_cmd, cmd_sub); */ -#define ll_entry_start(_type, _section_u) \ - ({ \ - extern _type _u_boot_list_##_section_u##__start; \ - _type *_ll_result = &_u_boot_list_##_section_u##__start;\ - _ll_result; \ - }) +#define ll_entry_start(_type, _list) \ +({ \ + static char start[0] __aligned(4) __attribute__((unused, \ + section(".u_boot_list_2_"#_list"_1"))); \ + (_type *)&start; \ +}) /** - * ll_entry_count() - Return the number of elements in linker-generated array + * ll_entry_end() - Point after last entry of linker-generated array * @_type: Data type of the entry - * @_section_u: Subsection of u_boot_list in which this entry is placed + * @_list: Name of the list in which this entry is placed * (with underscores instead of dots) * + * This function returns (_type *) pointer after the very last entry of + * a linker-generated array placed into subsection of .u_boot_list + * section specified by _list argument. + * + * Since this macro defines an array end symbol, its leftmost index + * must be 2 and its rightmost index must be 3. + * + * Example: + * struct my_sub_cmd *msc = ll_entry_end(struct my_sub_cmd, cmd_sub); + */ +#define ll_entry_end(_type, _list) \ +({ \ + static char end[0] __aligned(4) __attribute__((unused, \ + section(".u_boot_list_2_"#_list"_3"))); \ + (_type *)&end; \ +}) +/** + * ll_entry_count() - Return the number of elements in linker-generated array + * @_type: Data type of the entry + * @_list: Name of the list of which the number of elements is computed + * * This function returns the number of elements of a linker-generated array - * placed into subsection of .u_boot_list section specified by _section_u + * placed into subsection of .u_boot_list section specified by _list * argument. The result is of an unsigned int type. * * Example: @@ -108,23 +215,19 @@ * for (i = 0; i < count; i++, msc++) * printf("Entry %i, x=%i y=%i\n", i, msc->x, msc->y); */ -#define ll_entry_count(_type, _section_u) \ +#define ll_entry_count(_type, _list) \ ({ \ - extern _type _u_boot_list_##_section_u##__start; \ - extern _type _u_boot_list_##_section_u##__end; \ - unsigned int _ll_result = \ - &_u_boot_list_##_section_u##__end - \ - &_u_boot_list_##_section_u##__start; \ + _type *start = ll_entry_start(_type, _list); \ + _type *end = ll_entry_end(_type, _list); \ + unsigned int _ll_result = end - start; \ _ll_result; \ }) - /** * ll_entry_get() - Retrieve entry from linker-generated array by name * @_type: Data type of the entry * @_name: Name of the entry - * @_section_u: Subsection of u_boot_list in which this entry is placed - * (with underscores instead of dots) + * @_list: Name of the list in which this entry is placed * * This function returns a pointer to a particular entry in LG-array * identified by the subsection of u_boot_list where the entry resides @@ -138,11 +241,54 @@ * ... * struct my_sub_cmd *c = ll_entry_get(struct my_sub_cmd, my_sub_cmd, cmd_sub); */ -#define ll_entry_get(_type, _name, _section_u) \ +#define ll_entry_get(_type, _name, _list) \ ({ \ - extern _type _u_boot_list_##_section_u##_##_name; \ - _type *_ll_result = &_u_boot_list_##_section_u##_##_name;\ + extern _type _u_boot_list_2_##_list##_2_##_name; \ + _type *_ll_result = \ + &_u_boot_list_2_##_list##_2_##_name; \ _ll_result; \ }) +/** + * ll_start() - Point to first entry of first linker-generated array + * @_type: Data type of the entry + * + * This function returns (_type *) pointer to the very first entry of + * the very first linker-generated array. + * + * Since this macro defines the start of the linker-generated arrays, + * its leftmost index must be 1. + * + * Example: + * struct my_sub_cmd *msc = ll_start(struct my_sub_cmd); + */ +#define ll_start(_type) \ +({ \ + static char start[0] __aligned(4) __attribute__((unused, \ + section(".u_boot_list_1"))); \ + (_type *)&start; \ +}) + +/** + * ll_entry_end() - Point after last entry of last linker-generated array + * @_type: Data type of the entry + * + * This function returns (_type *) pointer after the very last entry of + * the very last linker-generated array. + * + * Since this macro defines the end of the linker-generated arrays, + * its leftmost index must be 3. + * + * Example: + * struct my_sub_cmd *msc = ll_end(struct my_sub_cmd); + */ +#define ll_end(_type) \ +({ \ + static char end[0] __aligned(4) __attribute__((unused, \ + section(".u_boot_list_3"))); \ + (_type *)&end; \ +}) + +#endif /* __ASSEMBLY__ */ + #endif /* __LINKER_LISTS_H__ */ diff --git a/include/malloc.h b/include/malloc.h index 84ecf79344..6295929ea3 100644 --- a/include/malloc.h +++ b/include/malloc.h @@ -937,7 +937,6 @@ extern ulong mem_malloc_end; extern ulong mem_malloc_brk; void mem_malloc_init(ulong start, ulong size); -void malloc_bin_reloc(void); #ifdef __cplusplus }; /* end of extern "C" */ diff --git a/include/mmc.h b/include/mmc.h index a13e2bdcf1..de6d497d53 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -259,6 +259,7 @@ struct mmc { void (*set_ios)(struct mmc *mmc); int (*init)(struct mmc *mmc); int (*getcd)(struct mmc *mmc); + int (*getwp)(struct mmc *mmc); uint b_max; }; @@ -274,6 +275,7 @@ int get_mmc_num(void); int board_mmc_getcd(struct mmc *mmc); int mmc_switch_part(int dev_num, unsigned int part_num); int mmc_getcd(struct mmc *mmc); +int mmc_getwp(struct mmc *mmc); void spl_mmc_load(void) __noreturn; #ifdef CONFIG_GENERIC_MMC diff --git a/include/ns9750_bbus.h b/include/ns9750_bbus.h deleted file mode 100644 index 9485338f73..0000000000 --- a/include/ns9750_bbus.h +++ /dev/null @@ -1,125 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_bbus.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Definitions for BBus usage - * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 10 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * - ***********************************************************************/ - -#ifndef FS_NS9750_BBUS_H -#define FS_NS9750_BBUS_H - -#define NS9750_BBUS_MODULE_BASE (0x90600000) - -#define get_bbus_reg_addr(c) \ - ((volatile unsigned int *)(NS9750_BBUS_MODULE_BASE+(unsigned int) (c))) - -/* We have support for 50 GPIO pins */ - -#define get_gpio_cfg_reg_addr(pin) \ - get_bbus_reg_addr( NS9750_BBUS_GPIO_CFG_BASE + (((pin) >> 3) * 4) ) - -/* To Read/Modify/Write a pin configuration register, use it like - set_gpio_cfg_reg_val( 12, NS9750_GPIO_CFG_FUNC_GPIO|NS9750_GPIO_CFG_OUTPUT ); - They should be wrapped by cli()/sti() */ -#define set_gpio_cfg_reg_val(pin,cfg) \ - *get_gpio_cfg_reg_addr(pin)=(*get_gpio_cfg_reg_addr((pin)) & \ - ~NS9750_GPIO_CFG_MASK((pin))) |\ - NS9750_GPIO_CFG_VAL((pin),(cfg)); - -#define NS9750_GPIO_CFG_MASK(pin) (NS9750_GPIO_CFG_VAL(pin, \ - NS9750_GPIO_CFG_MA)) -#define NS9750_GPIO_CFG_VAL(pin,cfg) ((cfg) << (((pin) % 8) * 4)) - -#define NS9750_GPIO_CFG_MA (0x0F) -#define NS9750_GPIO_CFG_INPUT (0x00) -#define NS9750_GPIO_CFG_OUTPUT (0x08) -#define NS9750_GPIO_CFG_FUNC_GPIO (0x03) -#define NS9750_GPIO_CFG_FUNC_2 (0x02) -#define NS9750_GPIO_CFG_FUNC_1 (0x01) -#define NS9750_GPIO_CFG_FUNC_0 (0x00) - -/* the register addresses */ - -#define NS9750_BBUS_MASTER_RESET (0x00) -#define NS9750_BBUS_GPIO_CFG_BASE (0x10) -#define NS9750_BBUS_GPIO_CTRL_BASE (0x30) -#define NS9750_BBUS_GPIO_STAT_BASE (0x40) -#define NS9750_BBUS_MONITOR (0x50) -#define NS9750_BBUS_DMA_INT_STAT (0x60) -#define NS9750_BBUS_DMA_INT_ENABLE (0x64) -#define NS9750_BBUS_USB_CFG (0x70) -#define NS9750_BBUS_ENDIAN_CFG (0x80) -#define NS9750_BBUS_ARM_WAKE_UP (0x90) - -/* register bit fields */ - -#define NS9750_BBUS_MASTER_RESET_UTIL (0x00000100) -#define NS9750_BBUS_MASTER_RESET_I2C (0x00000080) -#define NS9750_BBUS_MASTER_RESET_1284 (0x00000040) -#define NS9750_BBUS_MASTER_RESET_SER4 (0x00000020) -#define NS9750_BBUS_MASTER_RESET_SER3 (0x00000010) -#define NS9750_BBUS_MASTER_RESET_SER2 (0x00000008) -#define NS9750_BBUS_MASTER_RESET_SER1 (0x00000004) -#define NS9750_BBUS_MASTER_RESET_USB (0x00000002) -#define NS9750_BBUS_MASTER_RESET_DMA (0x00000001) - -/* BS9750_BBUS_DMA_INT_BINT* are valid for *DMA_INT_STAT and *DMA_INT_ENABLE */ - -#define NS9750_BBUS_DMA_INT_BINT16 (0x00010000) -#define NS9750_BBUS_DMA_INT_BINT15 (0x00008000) -#define NS9750_BBUS_DMA_INT_BINT14 (0x00004000) -#define NS9750_BBUS_DMA_INT_BINT13 (0x00002000) -#define NS9750_BBUS_DMA_INT_BINT12 (0x00001000) -#define NS9750_BBUS_DMA_INT_BINT11 (0x00000800) -#define NS9750_BBUS_DMA_INT_BINT10 (0x00000400) -#define NS9750_BBUS_DMA_INT_BINT9 (0x00000200) -#define NS9750_BBUS_DMA_INT_BINT8 (0x00000100) -#define NS9750_BBUS_DMA_INT_BINT7 (0x00000080) -#define NS9750_BBUS_DMA_INT_BINT6 (0x00000040) -#define NS9750_BBUS_DMA_INT_BINT5 (0x00000020) -#define NS9750_BBUS_DMA_INT_BINT4 (0x00000010) -#define NS9750_BBUS_DMA_INT_BINT3 (0x00000008) -#define NS9750_BBUS_DMA_INT_BINT2 (0x00000004) -#define NS9750_BBUS_DMA_INT_BINT1 (0x00000002) -#define NS9750_BBUS_DMA_INT_BINT0 (0x00000001) - -#define NS9750_BBUS_USB_CFG_OUTEN (0x00000008) -#define NS9750_BBUS_USB_CFG_SPEED (0x00000004) -#define NS9750_BBUS_USB_CFG_CFG_MA (0x00000003) -#define NS9750_BBUS_USB_CFG_CFG_HOST_SOFT (0x00000003) -#define NS9750_BBUS_USB_CFG_CFG_DEVICE (0x00000002) -#define NS9750_BBUS_USB_CFG_CFG_HOST (0x00000001) -#define NS9750_BBUS_USB_CFG_CFG_DIS (0x00000000) - -#define NS9750_BBUS_ENDIAN_CFG_AHBM (0x00001000) -#define NS9750_BBUS_ENDIAN_CFG_I2C (0x00000080) -#define NS9750_BBUS_ENDIAN_CFG_IEEE1284 (0x00000040) -#define NS9750_BBUS_ENDIAN_CFG_SER4 (0x00000020) -#define NS9750_BBUS_ENDIAN_CFG_SER3 (0x00000010) -#define NS9750_BBUS_ENDIAN_CFG_SER2 (0x00000008) -#define NS9750_BBUS_ENDIAN_CFG_SER1 (0x00000004) -#define NS9750_BBUS_ENDIAN_CFG_USB (0x00000002) -#define NS9750_BBUS_ENDIAN_CFG_DMA (0x00000001) - -#endif /* FS_NS9750_BBUS_H */ diff --git a/include/ns9750_mem.h b/include/ns9750_mem.h deleted file mode 100644 index 666e4127c8..0000000000 --- a/include/ns9750_mem.h +++ /dev/null @@ -1,172 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_mem.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Definitions for Memory Control Module - * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 5 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#ifndef FS_NS9750_MEM_H -#define FS_NS9750_SYS_H - -#define NS9750_MEM_MODULE_BASE (0xA0700000) - -#define get_mem_reg_addr(c) \ - ((volatile unsigned int *)(NS9750_MEM_MODULE_BASE+(unsigned int) (c))) - -/* the register addresses */ - -#define NS9750_MEM_CTRL (0x0000) -#define NS9750_MEM_STATUS (0x0004) -#define NS9750_MEM_CFG (0x0008) -#define NS9750_MEM_DYN_CTRL (0x0020) -#define NS9750_MEM_DYN_REFRESH (0x0024) -#define NS9750_MEM_DYN_READ_CFG (0x0028) -#define NS9750_MEM_DYN_TRP (0x0030) -#define NS9750_MEM_DYN_TRAS (0x0034) -#define NS9750_MEM_DYN_TSREX (0x0038) -#define NS9750_MEM_DYN_TAPR (0x003C) -#define NS9750_MEM_DYN_TDAL (0x0040) -#define NS9750_MEM_DYN_TWR (0x0044) -#define NS9750_MEM_DYN_TRC (0x0048) -#define NS9750_MEM_DYN_TRFC (0x004C) -#define NS9750_MEM_DYN_TXSR (0x0050) -#define NS9750_MEM_DYN_TRRD (0x0054) -#define NS9750_MEM_DYN_TMRD (0x0058) -#define NS9750_MEM_STAT_EXT_WAIT (0x0080) -#define NS9750_MEM_DYN_CFG_BASE (0x0100) -#define NS9750_MEM_DYN_RAS_CAS_BASE (0x0104) -#define NS9750_MEM_STAT_CFG_BASE (0x0200) -#define NS9750_MEM_STAT_WAIT_WEN_BASE (0x0204) -#define NS9750_MEM_STAT_WAIT_OEN_BASE (0x0208) -#define NS9750_MEM_STAT_WAIT_RD_BASE (0x020C) -#define NS9750_MEM_STAT_WAIT_PAGE_BASE (0x0210) -#define NS9750_MEM_STAT_WAIR_WR_BASE (0x0214) -#define NS9750_MEM_STAT_WAIT_TURN_BASE (0x0218) - -/* the vectored register addresses */ - -#define NS9750_MEM_DYN_CFG(c) (NS9750_MEM_DYN_CFG_BASE + (c)*0x20) -#define NS9750_MEM_DYN_RAS_CAS(c) (NS9750_MEM_DYN_RAS_CAS_BASE + (c)*0x20) -#define NS9750_MEM_STAT_CFG(c) (NS9750_MEM_STAT_CFG_BASE + (c)*0x20) -#define NS9750_MEM_STAT_WAIT_WEN(c) (NS9750_MEM_STAT_WAIT_WEN_BASE+(c)*0x20) -#define NS9750_MEM_STAT_WAIT_OEN(c) (NS9750_MEM_STAT_WAIT_OEN_BASE+(c)*0x20) -#define NS9750_MEM_STAT_RD(c) (NS9750_MEM_STAT_WAIT_RD_BASE+(c)*0x20) -#define NS9750_MEM_STAT_PAGE(c) (NS9750_MEM_STAT_WAIT_PAGE_BASE+(c)*0x20) -#define NS9750_MEM_STAT_WR(c) (NS9750_MEM_STAT_WAIT_WR_BASE+(c)*0x20) -#define NS9750_MEM_STAT_TURN(c) (NS9750_MEM_STAT_WAIT_TURN_BASE+(c)*0x20) - -/* register bit fields */ - -#define NS9750_MEM_CTRL_L (0x00000004) -#define NS9750_MEM_CTRL_M (0x00000002) -#define NS9750_MEM_CTRL_E (0x00000001) - -#define NS9750_MEM_STAT_SA (0x00000004) -#define NS9750_MEM_STAT_S (0x00000002) -#define NS9750_MEM_STAT_B (0x00000001) - -#define NS9750_MEM_CFG_CLK (0x00000010) -#define NS9750_MEM_CFG_N (0x00000001) - -#define NS9750_MEM_DYN_CTRL_NRP (0x00004000) -#define NS9750_MEM_DYN_CTRL_DP (0x00002000) -#define NS9750_MEM_DYN_CTRL_I_MA (0x00000180) -#define NS9750_MEM_DYN_CTRL_I_NORMAL (0x00000000) -#define NS9750_MEM_DYN_CTRL_I_MODE (0x00000080) -#define NS9750_MEM_DYN_CTRL_I_PALL (0x00000100) -#define NS9750_MEM_DYN_CTRL_I_NOP (0x00000180) -#define NS9750_MEM_DYN_CTRL_SR (0x00000002) -#define NS9750_MEM_DYN_CTRL_CE (0x00000001) - - -#define NS9750_MEM_DYN_REFRESH_MA (0x000007FF) - -#define NS9750_MEM_DYN_READ_CFG_MA (0x00000003) -#define NS9750_MEM_DYN_READ_CFG_DELAY0 (0x00000001) -#define NS9750_MEM_DYN_READ_CFG_DELAY1 (0x00000002) -#define NS9750_MEM_DYN_READ_CFG_DELAY2 (0x00000003) - -#define NS9750_MEM_DYN_TRP_MA (0x0000000F) - -#define NS9750_MEM_DYN_TRAS_MA (0x0000000F) - -#define NS9750_MEM_DYN_TSREX_MA (0x0000000F) - -#define NS9750_MEM_DYN_TAPR_MA (0x0000000F) - -#define NS9750_MEM_DYN_TDAL_MA (0x0000000F) - -#define NS9750_MEM_DYN_TWR_MA (0x0000000F) - -#define NS9750_MEM_DYN_TRC_MA (0x0000001F) - -#define NS9750_MEM_DYN_TRFC_MA (0x0000001F) - -#define NS9750_MEM_DYN_TXSR_MA (0x0000001F) - -#define NS9750_MEM_DYN_TRRD_MA (0x0000000F) - -#define NS9750_MEM_DYN_TMRD_MA (0x0000000F) - -#define NS9750_MEM_STAT_EXTW_WAIT_MA (0x0000003F) - -#define NS9750_MEM_DYN_CFG_P (0x00100000) -#define NS9750_MEM_DYN_CFG_BDMC (0x00080000) -#define NS9750_MEM_DYN_CFG_AM (0x00004000) -#define NS9750_MEM_DYN_CFG_AM_MA (0x00001F80) -#define NS9750_MEM_DYN_CFG_MD (0x00000018) - -#define NS9750_MEM_DYN_RAS_CAS_CAS_MA (0x00000300) -#define NS9750_MEM_DYN_RAS_CAS_CAS_1 (0x00000100) -#define NS9750_MEM_DYN_RAS_CAS_CAS_2 (0x00000200) -#define NS9750_MEM_DYN_RAS_CAS_CAS_3 (0x00000300) -#define NS9750_MEM_DYN_RAS_CAS_RAS_MA (0x00000003) -#define NS9750_MEM_DYN_RAS_CAS_RAS_1 (0x00000001) -#define NS9750_MEM_DYN_RAS_CAS_RAS_2 (0x00000002) -#define NS9750_MEM_DYN_RAS_CAS_RAS_3 (0x00000003) - -#define NS9750_MEM_STAT_CFG_PSMC (0x00100000) -#define NS9750_MEM_STAT_CFG_BSMC (0x00080000) -#define NS9750_MEM_STAT_CFG_EW (0x00000100) -#define NS9750_MEM_STAT_CFG_PB (0x00000080) -#define NS9750_MEM_STAT_CFG_PC (0x00000040) -#define NS9750_MEM_STAT_CFG_PM (0x00000008) -#define NS9750_MEM_STAT_CFG_MW_MA (0x00000003) -#define NS9750_MEM_STAT_CFG_MW_8 (0x00000000) -#define NS9750_MEM_STAT_CFG_MW_16 (0x00000001) -#define NS9750_MEM_STAT_CFG_MW_32 (0x00000002) - -#define NS9750_MEM_STAT_WAIT_WEN_MA (0x0000000F) - -#define NS9750_MEM_STAT_WAIT_OEN_MA (0x0000000F) - -#define NS9750_MEM_STAT_WAIT_RD_MA (0x0000001F) - -#define NS9750_MEM_STAT_WAIT_PAGE_MA (0x0000001F) - -#define NS9750_MEM_STAT_WAIT_WR_MA (0x0000001F) - -#define NS9750_MEM_STAT_WAIT_TURN_MA (0x0000000F) - - -#endif /* FS_NS9750_MEM_H */ diff --git a/include/ns9750_ser.h b/include/ns9750_ser.h deleted file mode 100644 index b5c297e436..0000000000 --- a/include/ns9750_ser.h +++ /dev/null @@ -1,202 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_ser.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @References: [1] NS9750 Hardware Reference, December 2003 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#ifndef FS_NS9750_SER_H -#define FS_NS9750_SER_H - -#define NS9750_SER_MODULE_BASE (0x90200000) - -#define get_ser_reg_addr(c) \ - ((volatile unsigned int *)(NS9750_SER_MODULE_BASE+(unsigned int) (c))) - -#define get_ser_reg_addr_channel(reg,chan) \ - get_ser_reg_addr((reg)+(((chan)<2)?0:0x00100000)+(((chan)&1)?0x40:0)) - -/* the register addresses */ - -#define NS9750_SER_CTRL_A (0x00) -#define NS9750_SER_CTRL_B (0x04) -#define NS9750_SER_STAT_A (0x08) -#define NS9750_SER_BITRATE (0x0C) -#define NS9750_SER_FIFO (0x10) -#define NS9750_SER_RX_BUF_TIMER (0x14) -#define NS9750_SER_RX_CHAR_TIMER (0x18) -#define NS9750_SER_RX_MATCH (0x1C) -#define NS9750_SER_RX_MATCH_MASK (0x20) -#define NS9750_SER_FLOW_CTRL (0x34) -#define NS9750_SER_FLOW_CTRL_FORCE (0x38) - -/* register bit fields */ - -/* control A register */ - -#define NS9750_SER_CTRL_A_CE (0x80000000) -#define NS9750_SER_CTRL_A_BRK (0x40000000) -#define NS9750_SER_CTRL_A_STICKP (0x20000000) -#define NS9750_SER_CTRL_A_EPS (0x10000000) -#define NS9750_SER_CTRL_A_PE (0x08000000) -#define NS9750_SER_CTRL_A_STOP (0x04000000) -#define NS9750_SER_CTRL_A_WLS_MA (0x03000000) -#define NS9750_SER_CTRL_A_WLS_5 (0x00000000) -#define NS9750_SER_CTRL_A_WLS_6 (0x01000000) -#define NS9750_SER_CTRL_A_WLS_7 (0x02000000) -#define NS9750_SER_CTRL_A_WLS_8 (0x03000000) -#define NS9750_SER_CTRL_A_CTSTX (0x00800000) -#define NS9750_SER_CTRL_A_RTSRX (0x00400000) -#define NS9750_SER_CTRL_A_RL (0x00200000) -#define NS9750_SER_CTRL_A_LL (0x00100000) -#define NS9750_SER_CTRL_A_RES (0x000CF000) -#define NS9750_SER_CTRL_A_DTR (0x00020000) -#define NS9750_SER_CTRL_A_RTS (0x00010000) -#define NS9750_SER_CTRL_A_RIE_MA (0x00000E00) -#define NS9750_SER_CTRL_A_ERXDMA (0x00000100) -#define NS9750_SER_CTRL_A_RIC_MA (0x000000E0) -#define NS9750_SER_CTRL_A_TIC_MA (0x0000001E) -#define NS9750_SER_CTRL_A_ETXDMA (0x00000001) - -/* control B register */ - -#define NS9750_SER_CTRL_B_RDM1 (0x80000000) -#define NS9750_SER_CTRL_B_RDM2 (0x40000000) -#define NS9750_SER_CTRL_B_RDM3 (0x20000000) -#define NS9750_SER_CTRL_B_RDM4 (0x10000000) -#define NS9750_SER_CTRL_B_RBGT (0x08000000) -#define NS9750_SER_CTRL_B_RCGT (0x04000000) -#define NS9750_SER_CTRL_B_MODE_MA (0x00300000) -#define NS9750_SER_CTRL_B_MODE_UART (0x00000000) -#define NS9750_SER_CTRL_B_MODE_HDLC (0x00100000) -#define NS9750_SER_CTRL_B_MODE_SPI_M (0x00200000) -#define NS9750_SER_CTRL_B_MODE_SPI_S (0x00300000) -#define NS9750_SER_CTRL_B_BITORDR (0x00080000) -#define NS9750_SER_CTRL_B_RES (0x0007703F) -#define NS9750_SER_CTRL_B_RTSTX (0x00008000) -#define NS9750_SER_CTRL_B_ENDEC_MA (0x00000FC0) - -/* status A register */ - -#define NS9750_SER_STAT_A_MATCH1 (0x80000000) -#define NS9750_SER_STAT_A_MATCH2 (0x40000000) -#define NS9750_SER_STAT_A_MATCH3 (0x20000000) -#define NS9750_SER_STAT_A_MATCH4 (0x10000000) -#define NS9750_SER_STAT_A_BGAP (0x08000000) -#define NS9750_SER_STAT_A_CGAP (0x04000000) -#define NS9750_SER_STAT_A_RXFDB_MA (0x00300000) -#define NS9750_SER_STAT_A_RXFDB_FULL (0x00000000) -#define NS9750_SER_STAT_A_RXFDB_1 (0x00100000) -#define NS9750_SER_STAT_A_RXFDB_2 (0x00200000) -#define NS9750_SER_STAT_A_RXFDB_3 (0x00300000) -#define NS9750_SER_STAT_A_DCD (0x00080000) -#define NS9750_SER_STAT_A_RI (0x00040000) -#define NS9750_SER_STAT_A_DSR (0x00020000) -#define NS9750_SER_STAT_A_CTS (0x00010000) -#define NS9750_SER_STAT_A_RBRK (0x00008000) -#define NS9750_SER_STAT_A_RFE (0x00004000) -#define NS9750_SER_STAT_A_RPE (0x00002000) -#define NS9750_SER_STAT_A_ROVER (0x00001000) -#define NS9750_SER_STAT_A_RRDY (0x00000800) -#define NS9750_SER_STAT_A_RHALF (0x00000400) -#define NS9750_SER_STAT_A_RBC (0x00000200) -#define NS9750_SER_STAT_A_RFULL (0x00000100) -#define NS9750_SER_STAT_A_DCDI (0x00000080) -#define NS9750_SER_STAT_A_RII (0x00000040) -#define NS9750_SER_STAT_A_DSRI (0x00000020) -#define NS9750_SER_STAT_A_CTSI (0x00000010) -#define NS9750_SER_STAT_A_TRDY (0x00000008) -#define NS9750_SER_STAT_A_THALF (0x00000004) -#define NS9750_SER_STAT_A_TBC (0x00000002) -#define NS9750_SER_STAT_A_TEMPTY (0x00000001) - -#define NS9750_SER_STAT_A_RX_COND_ERR ( NS9750_SER_STAT_A_RFE | \ - NS9750_SER_STAT_A_ROVER | \ - NS9750_SER_STAT_A_RPE ) -#define NS9750_SER_STAT_A_RX_COND_ALL ( NS9750_SER_STAT_A_RX_COND_ERR | \ - NS9750_SER_STAT_A_RBRK | \ - NS9750_SER_STAT_A_RRDY | \ - NS9750_SER_STAT_A_RHALF | \ - NS9750_SER_STAT_A_RBC | \ - NS9750_SER_STAT_A_DCDI | \ - NS9750_SER_STAT_A_RII | \ - NS9750_SER_STAT_A_DSRI | \ - NS9750_SER_STAT_A_CTSI ) -#define NS9750_SER_STAT_A_TX_COND_ALL ( NS9750_SER_STAT_A_TRDY | \ - NS9750_SER_STAT_A_THALF | \ - NS9750_SER_STAT_A_TBC | \ - NS9750_SER_STAT_A_TEMPTY ) -/* bit rate register */ - -#define NS9750_SER_BITRATE_EBIT (0x80000000) -#define NS9750_SER_BITRATE_TMODE (0x40000000) -#define NS9750_SER_BITRATE_RXSRC (0x20000000) -#define NS9750_SER_BITRATE_TXSRC (0x10000000) -#define NS9750_SER_BITRATE_RXEXT (0x08000000) -#define NS9750_SER_BITRATE_TXEXT (0x04000000) -#define NS9750_SER_BITRATE_CLKMUX_MA (0x03000000) -#define NS9750_SER_BITRATE_CLKMUX_XTAL (0x00000000) -#define NS9750_SER_BITRATE_CLKMUX_BCLK (0x01000000) -#define NS9750_SER_BITRATE_CLKMUX_OUT1 (0x02000000) -#define NS9750_SER_BITRATE_CLKMUX_OUT2 (0x03000000) -#define NS9750_SER_BITRATE_TXCINV (0x00800000) -#define NS9750_SER_BITRATE_RXCINV (0x00400000) -#define NS9750_SER_BITRATE_TCDR_MA (0x00180000) -#define NS9750_SER_BITRATE_TCDR_1 (0x00000000) -#define NS9750_SER_BITRATE_TCDR_8 (0x00080000) -#define NS9750_SER_BITRATE_TCDR_16 (0x00100000) -#define NS9750_SER_BITRATE_TCDR_32 (0x00180000) -#define NS9750_SER_BITRATE_RCDR_MA (0x00070000) -#define NS9750_SER_BITRATE_RCDR_1 (0x00000000) -#define NS9750_SER_BITRATE_RCDR_8 (0x00020000) -#define NS9750_SER_BITRATE_RCDR_16 (0x00040000) -#define NS9750_SER_BITRATE_RCDR_32 (0x00060000) -#define NS9750_SER_BITRATE_TICS (0x00010000) -#define NS9750_SER_BITRATE_RICS (0x00008000) -#define NS9750_SER_BITRATE_N_MA (0x00007FFF) - -/* receive buffer gap timer */ - -#define NS9750_SER_RX_BUF_TIMER_TRUN (0x80000000) /* UART and SPI */ -#define NS9750_SER_RX_BUF_TIMER_BT_MA (0x0000FFFF) /* UART and SPI */ -#define NS9750_SER_RX_BUF_TIMER_MAXLEN_MA (0x0000FFFF) /* HDLC only */ - -/* receive character gap timer */ - -#define NS9750_SER_RX_CHAR_TIMER_TRUN (0x80000000) -#define NS9750_SER_RX_CHAR_TIMER_CT_MA (0x000FFFFF) - -/* receive match */ - -#define NS9750_SER_RX_MATCH_RDMB1_MA (0xFF000000) -#define NS9750_SER_RX_MATCH_RDMB2_MA (0x00FF0000) -#define NS9750_SER_RX_MATCH_RDMB3_MA (0x0000FF00) -#define NS9750_SER_RX_MATCH_RDMB4_MA (0x000000FF) - -/* receive match mask */ - -#define NS9750_SER_RX_MATCH_MASK_RDMB1_MA (0xFF000000) -#define NS9750_SER_RX_MATCH_MASK_RDMB2_MA (0x00FF0000) -#define NS9750_SER_RX_MATCH_MASK_RDMB3_MA (0x0000FF00) -#define NS9750_SER_RX_MATCH_MASK_RDMB4_MA (0x000000FF) - -#endif /* FS_NS9750_SER_H */ diff --git a/include/ns9750_sys.h b/include/ns9750_sys.h deleted file mode 100644 index f1dc2b2382..0000000000 --- a/include/ns9750_sys.h +++ /dev/null @@ -1,215 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2004 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id: ns9750_sys.h,v 1.1 2004/02/16 10:37:20 mpietrek Exp $ - * @Author: Markus Pietrek - * @Descr: Definitions for SYS Control Module - * @References: [1] NS9750 Hardware Reference Manual/December 2003 Chap. 4 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ***********************************************************************/ - -#ifndef FS_NS9750_SYS_H -#define FS_NS9750_SYS_H - -#define NS9750_SYS_MODULE_BASE (0xA0900000) - -#define get_sys_reg_addr(c) \ - ((volatile unsigned int *)(NS9750_SYS_MODULE_BASE+(unsigned int) (c))) - -/* the register addresses */ - -#define NS9750_SYS_AHB_GEN (0x0000) -#define NS9750_SYS_BRC_BASE (0x0004) -#define NS9750_SYS_AHB_TIMEOUT (0x0014) -#define NS9750_SYS_AHB_ERROR1 (0x0018) -#define NS9750_SYS_AHB_ERROR2 (0x001C) -#define NS9750_SYS_AHB_MON (0x0020) -#define NS9750_SYS_TIMER_COUNT_BASE (0x0044) -#define NS9750_SYS_TIMER_READ_BASE (0x0084) -#define NS9750_SYS_INT_VEC_ADR_BASE (0x00C4) -#define NS9750_SYS_INT_CFG_BASE (0x0144) -#define NS9750_SYS_ISRADDR (0x0164) -#define NS9750_SYS_INT_STAT_ACTIVE (0x0168) -#define NS9750_SYS_INT_STAT_RAW (0x016C) -#define NS9750_SYS_TIMER_INT_STAT (0x0170) -#define NS9750_SYS_SW_WDOG_CFG (0x0174) -#define NS9750_SYS_SW_WDOG_TIMER (0x0178) -#define NS9750_SYS_CLOCK (0x017C) -#define NS9750_SYS_RESET (0x0180) -#define NS9750_SYS_MISC (0x0184) -#define NS9750_SYS_PLL (0x0188) -#define NS9750_SYS_ACT_INT_STAT (0x018C) -#define NS9750_SYS_TIMER_CTRL_BASE (0x0190) -#define NS9750_SYS_CS_DYN_BASE_BASE (0x01D0) -#define NS9750_SYS_CS_DYN_MASK_BASE (0x01D4) -#define NS9750_SYS_CS_STATIC_BASE_BASE (0x01F0) -#define NS9750_SYS_CS_STATIC_MASK_BASE (0x01F4) -#define NS9750_SYS_GEN_ID (0x0210) -#define NS9750_SYS_EXT_INT_CTRL_BASE (0x0214) - -/* the vectored register addresses */ - -#define NS9750_SYS_TIMER_COUNT(c) (NS9750_SYS_TIMER_COUNT_BASE + (c)) -#define NS9750_SYS_TIMER_READ(c) (NS9750_SYS_TIMER_READ_BASE + (c)) -#define NS9750_SYS_INT_VEC_ADR(c) (NS9750_SYS_INT_VEC_ADR_BASE + (c)) -#define NS9750_SYS_TIMER_CTRL(c) (NS9750_SYS_TIMER_CTRL_BASE + (c)) -/* CS_DYN start with 4 */ -#define NS9750_SYS_CS_DYN_BASE(c) (NS9750_SYS_CS_DYN_BASE_BASE + ((c)-4)*2) -#define NS9750_SYS_CS_DYN_MASK(c) (NS9750_SYS_CS_DYN_MASK_BASE + ((c)-4)*2) -/* CS_STATIC start with 0 */ -#define NS9750_SYS_CS_STATIC_BASE(c) (NS9750_SYS_CS_STATIC_BASE_BASE + (c)*2) -#define NS9750_SYS_CS_STATIC_MASK(c) (NS9750_SYS_CS_STATIC_MASK_BASE + (c)*2) -#define NS9750_SYS_EXT_INT_CTRL(c) (NS9750_SYS_EXT_INT_CTRL + (c)) - -/* register bit fields */ - -#define NS9750_SYS_AHB_GEN_EXMAM (0x00000001) - -/* need to be n*8bit to BRC channel */ -#define NS9750_SYS_BRC_CEB (0x00000080) -#define NS9750_SYS_BRC_BRF_MA (0x00000030) -#define NS9750_SYS_BRC_BRF_100 (0x00000000) -#define NS9750_SYS_BRC_BRF_75 (0x00000010) -#define NS9750_SYS_BRC_BRF_50 (0x00000020) -#define NS9750_SYS_BRC_BRF_25 (0x00000030) - -#define NS9750_SYS_AHB_TIMEOUT_BAT_MA (0xFFFF0000) -#define NS9750_SYS_AHB_TIMEOUT_BMT_MA (0x0000FFFF) - -#define NS9750_SYS_AHB_ERROR2_ABL (0x00040000) -#define NS9750_SYS_AHB_ERROR2_AER (0x00020000) -#define NS9750_SYS_AHB_ERROR2_ABM (0x00010000) -#define NS9750_SYS_AHB_ERROR2_ABA (0x00008000) -#define NS9750_SYS_AHB_ERROR2_HWRT (0x00004000) -#define NS9750_SYS_AHB_ERROR2_HMID_MA (0x00003C00) -#define NS9750_SYS_AHB_ERROR2_HTPC_MA (0x000003C0) -#define NS9750_SYS_AHB_ERROR2_HSZ_MA (0x00000038) -#define NS9750_SYS_AHB_ERROR2_RR_MA (0x00000007) - -#define NS9750_SYS_AHB_MON_EIC (0x00800000) -#define NS9750_SYS_AHB_MON_MBII (0x00400000) -#define NS9750_SYS_AHB_MON_MBL_MA (0x003FFFC0) -#define NS9750_SYS_AHB_MON_MBLDC (0x00000020) -#define NS9750_SYS_AHB_MON_SERDC (0x00000010) -#define NS9750_SYS_AHB_MON_BMTC_MA (0x0000000C) -#define NS9750_SYS_AHB_MON_BMTC_RECORD (0x00000000) -#define NS9750_SYS_AHB_MON_BMTC_GEN_IRQ (0x00000004) -#define NS9750_SYS_AHB_MON_BMTC_GEN_RES (0x00000008) -#define NS9750_SYS_AHB_MON_BATC_MA (0x00000003) -#define NS9750_SYS_AHB_MON_BATC_RECORD (0x00000000) -#define NS9750_SYS_AHB_MON_BATC_GEN_IRQ (0x00000001) -#define NS9750_SYS_AHB_MON_BATC_GEN_RES (0x00000002) - -/* need to be n*8bit to Int Level */ - -#define NS9750_SYS_INT_CFG_IE (0x00000080) -#define NS9750_SYS_INT_CFG_IT (0x00000020) -#define NS9750_SYS_INT_CFG_IAD_MA (0x0000001F) - -#define NS9750_SYS_TIMER_INT_STAT_MA (0x0000FFFF) - -#define NS9750_SYS_SW_WDOG_CFG_SWWE (0x00000080) -#define NS9750_SYS_SW_WDOG_CFG_SWWI (0x00000020) -#define NS9750_SYS_SW_WDOG_CFG_SWWIC (0x00000010) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_MA (0x00000007) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_2 (0x00000000) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_4 (0x00000001) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_8 (0x00000002) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_16 (0x00000003) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_32 (0x00000004) -#define NS9750_SYS_SW_WDOG_CFG_SWTCS_64 (0x00000005) - -#define NS9750_SYS_CLOCK_LPCS_MA (0x00000380) -#define NS9750_SYS_CLOCK_LPCS_1 (0x00000000) -#define NS9750_SYS_CLOCK_LPCS_2 (0x00000080) -#define NS9750_SYS_CLOCK_LPCS_4 (0x00000100) -#define NS9750_SYS_CLOCK_LPCS_8 (0x00000180) -#define NS9750_SYS_CLOCK_LPCS_EXT (0x00000200) -#define NS9750_SYS_CLOCK_BBC (0x00000040) -#define NS9750_SYS_CLOCK_LCC (0x00000020) -#define NS9750_SYS_CLOCK_MCC (0x00000010) -#define NS9750_SYS_CLOCK_PARBC (0x00000008) -#define NS9750_SYS_CLOCK_PC (0x00000004) -#define NS9750_SYS_CLOCK_MACC (0x00000001) - -#define NS9750_SYS_RESET_SR (0x80000000) -#define NS9750_SYS_RESET_I2CW (0x00100000) -#define NS9750_SYS_RESET_CSE (0x00080000) -#define NS9750_SYS_RESET_SMWE (0x00040000) -#define NS9750_SYS_RESET_EWE (0x00020000) -#define NS9750_SYS_RESET_PI3WE (0x00010000) -#define NS9750_SYS_RESET_BBT (0x00000040) -#define NS9750_SYS_RESET_LCDC (0x00000020) -#define NS9750_SYS_RESET_MEMC (0x00000010) -#define NS9750_SYS_RESET_PCIAR (0x00000008) -#define NS9750_SYS_RESET_PCIM (0x00000004) -#define NS9750_SYS_RESET_MACM (0x00000001) - -#define NS9750_SYS_MISC_REV_MA (0xFF000000) -#define NS9750_SYS_MISC_PCIA (0x00002000) -#define NS9750_SYS_MISC_VDIS (0x00001000) -#define NS9750_SYS_MISC_BMM (0x00000800) -#define NS9750_SYS_MISC_CS1DB (0x00000400) -#define NS9750_SYS_MISC_CS1DW_MA (0x00000300) -#define NS9750_SYS_MISC_MCCM (0x00000080) -#define NS9750_SYS_MISC_PMSS (0x00000040) -#define NS9750_SYS_MISC_CS1P (0x00000020) -#define NS9750_SYS_MISC_ENDM (0x00000008) -#define NS9750_SYS_MISC_MBAR (0x00000004) -#define NS9750_SYS_MISC_IRAM0 (0x00000001) - -#define NS9750_SYS_PLL_PLLBS (0x02000000) -#define NS9750_SYS_PLL_PLLFS_MA (0x01800000) -#define NS9750_SYS_PLL_PLLIS_MA (0x00600000) -#define NS9750_SYS_PLL_PLLND_MA (0x001F0000) -#define NS9750_SYS_PLL_PLLSW (0x00008000) -#define NS9750_SYS_PLL_PLLBSSW (0x00000200) -#define NS9750_SYS_PLL_FSEL_MA (0x00000180) -#define NS9750_SYS_PLL_CPCC_MA (0x00000060) -#define NS9750_SYS_PLL_NDSW_MA (0x0000001F) - -#define NS9750_SYS_ACT_INT_STAT_MA (0x0000FFFF) - -#define NS9750_SYS_TIMER_CTRL_TEN (0x00008000) -#define NS9750_SYS_TIMER_CTRL_INTC (0x00000200) -#define NS9750_SYS_TIMER_CTRL_TLCS_MA (0x000001C0) -#define NS9750_SYS_TIMER_CTRL_TLCS_1 (0x00000000) -#define NS9750_SYS_TIMER_CTRL_TLCS_2 (0x00000040) -#define NS9750_SYS_TIMER_CTRL_TLCS_4 (0x00000080) -#define NS9750_SYS_TIMER_CTRL_TLCS_8 (0x000000C0) -#define NS9750_SYS_TIMER_CTRL_TLCS_16 (0x00000100) -#define NS9750_SYS_TIMER_CTRL_TLCS_32 (0x00000140) -#define NS9750_SYS_TIMER_CTRL_TLCS_64 (0x00000180) -#define NS9750_SYS_TIMER_CTRL_TLCS_EXT (0x000001C0) -#define NS9750_SYS_TIMER_CTRL_TM_MA (0x00000030) -#define NS9750_SYS_TIMER_CTRL_TM_INT (0x00000000) -#define NS9750_SYS_TIMER_CTRL_TM_LOW (0x00000010) -#define NS9750_SYS_TIMER_CTRL_TM_HIGH (0x00000020) -#define NS9750_SYS_TIMER_CTRL_INTS (0x00000008) -#define NS9750_SYS_TIMER_CTRL_UDS (0x00000004) -#define NS9750_SYS_TIMER_CTRL_TSZ (0x00000002) -#define NS9750_SYS_TIMER_CTRL_REN (0x00000001) - -#define NS9750_SYS_EXT_INT_CTRL_STS (0x00000008) -#define NS9750_SYS_EXT_INT_CTRL_CLR (0x00000004) -#define NS9750_SYS_EXT_INT_CTRL_PLTY (0x00000002) -#define NS9750_SYS_EXT_INT_CTRL_LVEDG (0x00000001) - -#endif /* FS_NS9750_SYS_H */ diff --git a/include/os.h b/include/os.h index 699682a408..038aba9e4f 100644 --- a/include/os.h +++ b/include/os.h @@ -40,6 +40,16 @@ struct sandbox_state; ssize_t os_read(int fd, void *buf, size_t count); /** + * Access to the OS read() system call with non-blocking access + * + * \param fd File descriptor as returned by os_open() + * \param buf Buffer to place data + * \param count Number of bytes to read + * \return number of bytes read, or -1 on error + */ +ssize_t os_read_no_block(int fd, void *buf, size_t count); + +/** * Access to the OS write() system call * * \param fd File descriptor as returned by os_open() @@ -136,4 +146,52 @@ u64 os_get_nsec(void); */ int os_parse_args(struct sandbox_state *state, int argc, char *argv[]); +/* + * Types of directory entry that we support. See also os_dirent_typename in + * the C file. + */ +enum os_dirent_t { + OS_FILET_REG, /* Regular file */ + OS_FILET_LNK, /* Symbolic link */ + OS_FILET_DIR, /* Directory */ + OS_FILET_UNKNOWN, /* Something else */ + + OS_FILET_COUNT, +}; + +/** A directory entry node, containing information about a single dirent */ +struct os_dirent_node { + struct os_dirent_node *next; /* Pointer to next node, or NULL */ + ulong size; /* Size of file in bytes */ + enum os_dirent_t type; /* Type of entry */ + char name[0]; /* Name of entry */ +}; + +/** + * Get a directionry listing + * + * This allocates and returns a linked list containing the directory listing. + * + * @param dirname Directory to examine + * @param headp Returns pointer to head of linked list, or NULL if none + * @return 0 if ok, -ve on error + */ +int os_dirent_ls(const char *dirname, struct os_dirent_node **headp); + +/** + * Get the name of a directory entry type + * + * @param type Type to cehck + * @return string containing the name of that type, or "???" if none/invalid + */ +const char *os_dirent_get_typename(enum os_dirent_t type); + +/** + * Get the size of a file + * + * @param fname Filename to check + * @return size of file, or -1 if an error ocurred + */ +ssize_t os_get_filesize(const char *fname); + #endif diff --git a/include/sandboxfs.h b/include/sandboxfs.h new file mode 100644 index 0000000000..f5213ac107 --- /dev/null +++ b/include/sandboxfs.h @@ -0,0 +1,30 @@ +/* + * Copyright (c) 2012, Google Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __SANDBOX_FS__ +#define __SANDBOX_FS__ + +int sandbox_fs_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info); + +long sandbox_fs_read_at(const char *filename, unsigned long pos, + void *buffer, unsigned long maxsize); + +void sandbox_fs_close(void); +int sandbox_fs_ls(const char *dirname); +int fs_read_sandbox(const char *filename, void *buf, int offset, int len); + +#endif diff --git a/include/spl.h b/include/spl.h index b02f36fa94..b40be8039c 100644 --- a/include/spl.h +++ b/include/spl.h @@ -59,6 +59,9 @@ void spl_display_print(void); /* NAND SPL functions */ void spl_nand_load_image(void); +/* OneNAND SPL functions */ +void spl_onenand_load_image(void); + /* NOR SPL functions */ void spl_nor_load_image(void); diff --git a/include/u-boot/crc.h b/include/u-boot/crc.h index 07badbfc5a..08e509edb4 100644 --- a/include/u-boot/crc.h +++ b/include/u-boot/crc.h @@ -30,4 +30,15 @@ uint32_t crc32 (uint32_t, const unsigned char *, uint); uint32_t crc32_wd (uint32_t, const unsigned char *, uint, uint); uint32_t crc32_no_comp (uint32_t, const unsigned char *, uint); +/** + * crc32_wd_buf - Perform CRC32 on a buffer and return result in buffer + * + * @input: Input buffer + * @ilen: Input buffer length + * @output: Place to put checksum result (4 bytes) + * @chunk_sz: Trigger watchdog after processing this many bytes + */ +void crc32_wd_buf(const unsigned char *input, uint ilen, + unsigned char *output, uint chunk_sz); + #endif /* _UBOOT_CRC_H */ diff --git a/include/usb_mass_storage.h b/include/usb_mass_storage.h new file mode 100644 index 0000000000..ffc3a13c29 --- /dev/null +++ b/include/usb_mass_storage.h @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2011 Samsung Electrnoics + * Lukasz Majewski <l.majewski@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * aloong with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __USB_MASS_STORAGE_H__ +#define __USB_MASS_STORAGE_H__ + +#define SECTOR_SIZE 0x200 + +#include <mmc.h> + +struct ums_device { + struct mmc *mmc; + int dev_num; + int offset; + int part_size; +}; + +struct ums_board_info { + int (*read_sector)(struct ums_device *ums_dev, + ulong start, lbaint_t blkcnt, void *buf); + int (*write_sector)(struct ums_device *ums_dev, + ulong start, lbaint_t blkcnt, const void *buf); + void (*get_capacity)(struct ums_device *ums_dev, + long long int *capacity); + const char *name; + struct ums_device ums_dev; +}; + +extern void board_usb_init(void); + +extern int fsg_init(struct ums_board_info *); +extern void fsg_cleanup(void); +extern struct ums_board_info *board_ums_init(unsigned int, + unsigned int, unsigned int); +extern int usb_gadget_handle_interrupts(void); +extern int fsg_main_thread(void *); + +#endif /* __USB_MASS_STORAGE_H__ */ diff --git a/include/usbdevice.h b/include/usbdevice.h index 3edaf8bcc2..7037efd33e 100644 --- a/include/usbdevice.h +++ b/include/usbdevice.h @@ -475,7 +475,9 @@ typedef struct urb_link { * function driver to inform it that data has arrived. */ -#define URB_BUF_SIZE 128 /* in linux we'd malloc this, but in u-boot we prefer static data */ +/* in linux we'd malloc this, but in u-boot we prefer static data */ +#define URB_BUF_SIZE 512 + struct urb { struct usb_endpoint_instance *endpoint; diff --git a/include/watchdog.h b/include/watchdog.h index 8c92a0b31b..97ec186be3 100644 --- a/include/watchdog.h +++ b/include/watchdog.h @@ -27,6 +27,24 @@ #ifndef _WATCHDOG_H_ #define _WATCHDOG_H_ +#if !defined(__ASSEMBLY__) +/* + * Reset the watchdog timer, always returns 0 + * + * This function is here since it is shared between board_f() and board_r(), + * and the legacy arch/<arch>/board.c code. + */ +int init_func_watchdog_reset(void); +#endif + +#ifdef CONFIG_WATCHDOG +#define INIT_FUNC_WATCHDOG_INIT init_func_watchdog_init, +#define INIT_FUNC_WATCHDOG_RESET init_func_watchdog_reset, +#else +#define INIT_FUNC_WATCHDOG_INIT +#define INIT_FUNC_WATCHDOG_RESET +#endif + #if defined(CONFIG_HW_WATCHDOG) && defined(CONFIG_WATCHDOG) # error "Configuration error: CONFIG_HW_WATCHDOG and CONFIG_WATCHDOG can't be used together." #endif diff --git a/lib/Makefile b/lib/Makefile index 86ca1a6ec1..1bfd3ee124 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -44,6 +44,7 @@ COBJS-$(CONFIG_TEST_FDTDEC) += fdtdec_test.o COBJS-$(CONFIG_GZIP) += gunzip.o COBJS-$(CONFIG_GZIP_COMPRESSED) += gzip.o COBJS-y += hashtable.o +COBJS-y += initcall.o COBJS-$(CONFIG_LMB) += lmb.o COBJS-y += ldiv.o COBJS-$(CONFIG_MD5) += md5.o diff --git a/lib/crc32.c b/lib/crc32.c index 27335a3ed9..76205da4f3 100644 --- a/lib/crc32.c +++ b/lib/crc32.c @@ -249,3 +249,12 @@ uint32_t ZEXPORT crc32_wd (uint32_t crc, return crc; } + +void crc32_wd_buf(const unsigned char *input, unsigned int ilen, + unsigned char *output, unsigned int chunk_sz) +{ + uint32_t crc; + + crc = crc32_wd(0, input, ilen, chunk_sz); + memcpy(output, &crc, sizeof(crc)); +} diff --git a/lib/display_options.c b/lib/display_options.c index 694d2f22e8..e6d684bd60 100644 --- a/lib/display_options.c +++ b/lib/display_options.c @@ -98,7 +98,8 @@ void print_size(unsigned long long size, const char *s) */ #define MAX_LINE_LENGTH_BYTES (64) #define DEFAULT_LINE_LENGTH_BYTES (16) -int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen) +int print_buffer(ulong addr, const void *data, uint width, uint count, + uint linelen) { /* linebuf as a union causes proper alignment */ union linebuf { @@ -114,14 +115,15 @@ int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen) linelen = DEFAULT_LINE_LENGTH_BYTES / width; while (count) { + uint thislinelen = linelen; printf("%08lx:", addr); /* check for overflow condition */ - if (count < linelen) - linelen = count; + if (count < thislinelen) + thislinelen = count; /* Copy from memory into linebuf and print hex values */ - for (i = 0; i < linelen; i++) { + for (i = 0; i < thislinelen; i++) { uint32_t x; if (width == 4) x = lb.ui[i] = *(volatile uint32_t *)data; @@ -133,8 +135,15 @@ int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen) data += width; } + while (thislinelen < linelen) { + /* fill line with whitespace for nice ASCII print */ + for (i=0; i<width*2+1; i++) + puts(" "); + linelen--; + } + /* Print data in ASCII characters */ - for (i = 0; i < linelen * width; i++) { + for (i = 0; i < thislinelen * width; i++) { if (!isprint(lb.uc[i]) || lb.uc[i] >= 0x80) lb.uc[i] = '.'; } @@ -142,8 +151,8 @@ int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen) printf(" %s\n", lb.uc); /* update references */ - addr += linelen * width; - count -= linelen; + addr += thislinelen * width; + count -= thislinelen; if (ctrlc()) return -1; diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 88f6b68270..b232096f92 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -37,6 +37,7 @@ DECLARE_GLOBAL_DATA_PTR; static const char * const compat_names[COMPAT_COUNT] = { COMPAT(UNKNOWN, "<none>"), COMPAT(NVIDIA_TEGRA20_USB, "nvidia,tegra20-ehci"), + COMPAT(NVIDIA_TEGRA114_I2C, "nvidia,tegra114-i2c"), COMPAT(NVIDIA_TEGRA20_I2C, "nvidia,tegra20-i2c"), COMPAT(NVIDIA_TEGRA20_DVC, "nvidia,tegra20-i2c-dvc"), COMPAT(NVIDIA_TEGRA20_EMC, "nvidia,tegra20-emc"), @@ -45,6 +46,8 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(NVIDIA_TEGRA20_NAND, "nvidia,tegra20-nand"), COMPAT(NVIDIA_TEGRA20_PWM, "nvidia,tegra20-pwm"), COMPAT(NVIDIA_TEGRA20_DC, "nvidia,tegra20-dc"), + COMPAT(NVIDIA_TEGRA30_SDMMC, "nvidia,tegra30-sdhci"), + COMPAT(NVIDIA_TEGRA20_SDMMC, "nvidia,tegra20-sdhci"), COMPAT(NVIDIA_TEGRA20_SFLASH, "nvidia,tegra20-sflash"), COMPAT(NVIDIA_TEGRA20_SLINK, "nvidia,tegra20-slink"), COMPAT(SMSC_LAN9215, "smsc,lan9215"), diff --git a/lib/initcall.c b/lib/initcall.c new file mode 100644 index 0000000000..fc91bf641f --- /dev/null +++ b/lib/initcall.c @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2013 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <initcall.h> + +int initcall_run_list(init_fnc_t init_sequence[]) +{ + init_fnc_t *init_fnc_ptr; + + for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { + debug("initcall: %p\n", *init_fnc_ptr); + if ((*init_fnc_ptr)()) { + debug("initcall sequence %p failed at call %p\n", + init_sequence, *init_fnc_ptr); + return -1; + } + } + return 0; +} diff --git a/lib/vsprintf.c b/lib/vsprintf.c index 3c432f8764..533a96b85e 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -126,6 +126,29 @@ unsigned long ustrtoul(const char *cp, char **endp, unsigned int base) return result; } +unsigned long long ustrtoull(const char *cp, char **endp, unsigned int base) +{ + unsigned long long result = simple_strtoull(cp, endp, base); + switch (**endp) { + case 'G': + result *= 1024; + /* fall through */ + case 'M': + result *= 1024; + /* fall through */ + case 'K': + case 'k': + result *= 1024; + if ((*endp)[1] == 'i') { + if ((*endp)[2] == 'B') + (*endp) += 3; + else + (*endp) += 2; + } + } + return result; +} + unsigned long long simple_strtoull(const char *cp, char **endp, unsigned int base) { diff --git a/nand_spl/board/amcc/acadia/u-boot.lds b/nand_spl/board/amcc/acadia/u-boot.lds index 44a6f816c2..5e14b0cd66 100644 --- a/nand_spl/board/amcc/acadia/u-boot.lds +++ b/nand_spl/board/amcc/acadia/u-boot.lds @@ -60,5 +60,5 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; } diff --git a/nand_spl/board/amcc/bamboo/u-boot.lds b/nand_spl/board/amcc/bamboo/u-boot.lds index d4ea67ae8a..d8edffe776 100644 --- a/nand_spl/board/amcc/bamboo/u-boot.lds +++ b/nand_spl/board/amcc/bamboo/u-boot.lds @@ -62,5 +62,5 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; } diff --git a/nand_spl/board/amcc/canyonlands/u-boot.lds b/nand_spl/board/amcc/canyonlands/u-boot.lds index 794f041034..70001bff91 100644 --- a/nand_spl/board/amcc/canyonlands/u-boot.lds +++ b/nand_spl/board/amcc/canyonlands/u-boot.lds @@ -62,5 +62,5 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; } diff --git a/nand_spl/board/amcc/kilauea/u-boot.lds b/nand_spl/board/amcc/kilauea/u-boot.lds index 4e860ad59e..0d7e6de08a 100644 --- a/nand_spl/board/amcc/kilauea/u-boot.lds +++ b/nand_spl/board/amcc/kilauea/u-boot.lds @@ -60,5 +60,5 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; } diff --git a/nand_spl/board/amcc/sequoia/u-boot.lds b/nand_spl/board/amcc/sequoia/u-boot.lds index 8ff6ac5cc1..d28fe61637 100644 --- a/nand_spl/board/amcc/sequoia/u-boot.lds +++ b/nand_spl/board/amcc/sequoia/u-boot.lds @@ -62,5 +62,5 @@ SECTIONS . = ALIGN(4); } - __bss_end__ = . ; + __bss_end = . ; } diff --git a/nand_spl/board/freescale/mpc8315erdb/u-boot.lds b/nand_spl/board/freescale/mpc8315erdb/u-boot.lds index d140453d49..870b47d6af 100644 --- a/nand_spl/board/freescale/mpc8315erdb/u-boot.lds +++ b/nand_spl/board/freescale/mpc8315erdb/u-boot.lds @@ -49,7 +49,7 @@ SECTIONS .bss (NOLOAD) : { *(.*bss) } - __bss_end__ = .; + __bss_end = .; } ENTRY(_start) -ASSERT(__bss_end__ <= 0xfff01000, "NAND bootstrap too big"); +ASSERT(__bss_end <= 0xfff01000, "NAND bootstrap too big"); diff --git a/nand_spl/board/freescale/mpc8536ds/Makefile b/nand_spl/board/freescale/mpc8536ds/Makefile index 9c778261b6..3a2a2d4b17 100644 --- a/nand_spl/board/freescale/mpc8536ds/Makefile +++ b/nand_spl/board/freescale/mpc8536ds/Makefile @@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/freescale/mpc8569mds/Makefile b/nand_spl/board/freescale/mpc8569mds/Makefile index 9c778261b6..3a2a2d4b17 100644 --- a/nand_spl/board/freescale/mpc8569mds/Makefile +++ b/nand_spl/board/freescale/mpc8569mds/Makefile @@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/freescale/mpc8572ds/Makefile b/nand_spl/board/freescale/mpc8572ds/Makefile index 9c778261b6..3a2a2d4b17 100644 --- a/nand_spl/board/freescale/mpc8572ds/Makefile +++ b/nand_spl/board/freescale/mpc8572ds/Makefile @@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/freescale/mx31pdk/Makefile b/nand_spl/board/freescale/mx31pdk/Makefile index fd0dfc19d8..3d57059f50 100644 --- a/nand_spl/board/freescale/mx31pdk/Makefile +++ b/nand_spl/board/freescale/mx31pdk/Makefile @@ -6,7 +6,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL @@ -38,11 +37,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds -Map $(nandobj)u-boot-spl.map \ -o $@ -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/freescale/mx31pdk/u-boot.lds b/nand_spl/board/freescale/mx31pdk/u-boot.lds index a26110f393..5f2b5e2022 100644 --- a/nand_spl/board/freescale/mx31pdk/u-boot.lds +++ b/nand_spl/board/freescale/mx31pdk/u-boot.lds @@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4); @@ -73,7 +73,7 @@ SECTIONS __bss_start = .; *(.bss) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } /DISCARD/ : { *(.bss*) } diff --git a/nand_spl/board/freescale/p1010rdb/Makefile b/nand_spl/board/freescale/p1010rdb/Makefile index c3495ec0df..f7bdf9207d 100644 --- a/nand_spl/board/freescale/p1010rdb/Makefile +++ b/nand_spl/board/freescale/p1010rdb/Makefile @@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/freescale/p1023rds/Makefile b/nand_spl/board/freescale/p1023rds/Makefile index 9b2c0d7f35..fb7d5612a1 100644 --- a/nand_spl/board/freescale/p1023rds/Makefile +++ b/nand_spl/board/freescale/p1023rds/Makefile @@ -27,7 +27,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -57,11 +56,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/freescale/p1_p2_rdb/Makefile b/nand_spl/board/freescale/p1_p2_rdb/Makefile index 9c778261b6..3a2a2d4b17 100644 --- a/nand_spl/board/freescale/p1_p2_rdb/Makefile +++ b/nand_spl/board/freescale/p1_p2_rdb/Makefile @@ -32,7 +32,6 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -62,11 +61,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/karo/tx25/Makefile b/nand_spl/board/karo/tx25/Makefile index 82489d2405..9f9c5893cf 100644 --- a/nand_spl/board/karo/tx25/Makefile +++ b/nand_spl/board/karo/tx25/Makefile @@ -27,7 +27,6 @@ include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds -LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL @@ -59,11 +58,7 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds -Map $(nandobj)u-boot-spl.map \ -o $@ -# The following line expands into whole rule which generates $(LSTSCRIPT), -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) -$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT) +$(nandobj)u-boot.lds: $(LDSCRIPT) $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ -ansi -D__ASSEMBLY__ -P - <$< >$@ diff --git a/nand_spl/board/karo/tx25/u-boot.lds b/nand_spl/board/karo/tx25/u-boot.lds index ee361314fd..4d1aac3677 100644 --- a/nand_spl/board/karo/tx25/u-boot.lds +++ b/nand_spl/board/karo/tx25/u-boot.lds @@ -49,7 +49,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4); @@ -71,7 +71,7 @@ SECTIONS __bss_start = .; *(.bss) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } /DISCARD/ : { *(.bss*) } diff --git a/nand_spl/board/samsung/smdk6400/u-boot.lds b/nand_spl/board/samsung/smdk6400/u-boot.lds index 2ed646630c..b6c573be5c 100644 --- a/nand_spl/board/samsung/smdk6400/u-boot.lds +++ b/nand_spl/board/samsung/smdk6400/u-boot.lds @@ -53,7 +53,7 @@ SECTIONS . = ALIGN(4); .u_boot_list : { - #include <u-boot.lst> + *(SORT(.u_boot_list*)); } . = ALIGN(4); @@ -75,6 +75,6 @@ SECTIONS __bss_start = .; *(.bss) . = ALIGN(4); - __bss_end__ = .; + __bss_end = .; } } diff --git a/nand_spl/board/sheldon/simpc8313/u-boot.lds b/nand_spl/board/sheldon/simpc8313/u-boot.lds index 534a0c8654..7ab408bb5a 100644 --- a/nand_spl/board/sheldon/simpc8313/u-boot.lds +++ b/nand_spl/board/sheldon/simpc8313/u-boot.lds @@ -48,7 +48,7 @@ SECTIONS . = ALIGN(8); __bss_start = .; .bss (NOLOAD) : { *(.*bss) } - __bss_end__ = .; + __bss_end = .; } ENTRY(_start) -ASSERT(__bss_end__ <= 0xfff01000, "NAND bootstrap too big"); +ASSERT(__bss_end <= 0xfff01000, "NAND bootstrap too big"); @@ -528,15 +528,11 @@ restart: case NETLOOP_SUCCESS: net_cleanup_loop(); if (NetBootFileXferSize > 0) { - char buf[20]; printf("Bytes transferred = %ld (%lx hex)\n", NetBootFileXferSize, NetBootFileXferSize); - sprintf(buf, "%lX", NetBootFileXferSize); - setenv("filesize", buf); - - sprintf(buf, "%lX", (unsigned long)load_addr); - setenv("fileaddr", buf); + setenv_hex("filesize", NetBootFileXferSize); + setenv_hex("fileaddr", load_addr); } if (protocol != NETCONS) eth_halt(); diff --git a/spl/.gitignore b/spl/.gitignore index 8cf487e5c8..7c8814709f 100644 --- a/spl/.gitignore +++ b/spl/.gitignore @@ -2,4 +2,3 @@ u-boot-spl u-boot-spl.bin u-boot-spl.lds u-boot-spl.map -u-boot.lst diff --git a/spl/Makefile b/spl/Makefile index 101d478c66..b5a8de7835 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -81,8 +81,10 @@ LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/memory.o LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/libnet.o LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/libnet.o LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o +LIBS-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/libusb_musb-new.o +LIBS-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/libusb_gadget.o -ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) +ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),) LIBS-y += $(CPUDIR)/omap-common/libomap-common.o endif @@ -117,7 +119,7 @@ ifeq ($(wildcard $(LDSCRIPT)),) LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-spl.lds endif ifeq ($(wildcard $(LDSCRIPT)),) - LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds + LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot-spl.lds endif ifeq ($(wildcard $(LDSCRIPT)),) $(error could not find linker script) @@ -175,11 +177,7 @@ $(START): depend $(LIBS): depend $(MAKE) -C $(SRCTREE)$(dir $(subst $(SPLTREE),,$@)) -# The following line expands into whole rule which generates u-boot.lst, -# the file containing u-boots LG-array linker section. This is included into -# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. -$(eval $(call make_u_boot_list, $(obj)u-boot.lst, $(LIBS))) -$(obj)u-boot-spl.lds: $(LDSCRIPT) $(obj)u-boot.lst depend +$(obj)u-boot-spl.lds: $(LDSCRIPT) depend $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj). -ansi -D__ASSEMBLY__ -P - < $< > $@ depend: $(obj).depend diff --git a/tools/checkpatch.pl b/tools/checkpatch.pl index c7475f9e33..051ba0de37 100755 --- a/tools/checkpatch.pl +++ b/tools/checkpatch.pl @@ -33,6 +33,7 @@ my %ignore_type = (); my @ignore = (); my $help = 0; my $configuration_file = ".checkpatch.conf"; +my $max_line_length = 80; sub help { my ($exitcode) = @_; @@ -51,6 +52,7 @@ Options: -f, --file treat FILE as regular source file --subjective, --strict enable more subjective tests --ignore TYPE(,TYPE2...) ignore various comma separated message types + --max-line-length=n set the maximum line length, if exceeded, warn --show-types show the message "types" in the output --root=PATH PATH to the kernel tree root --no-summary suppress the per-file summary @@ -107,6 +109,7 @@ GetOptions( 'strict!' => \$check, 'ignore=s' => \@ignore, 'show-types!' => \$show_types, + 'max-line-length=i' => \$max_line_length, 'root=s' => \$root, 'summary!' => \$summary, 'mailback!' => \$mailback, @@ -227,8 +230,12 @@ our $Inline = qr{inline|__always_inline|noinline}; our $Member = qr{->$Ident|\.$Ident|\[[^]]*\]}; our $Lval = qr{$Ident(?:$Member)*}; -our $Constant = qr{(?:[0-9]+|0x[0-9a-fA-F]+)[UL]*}; -our $Assignment = qr{(?:\*\=|/=|%=|\+=|-=|<<=|>>=|&=|\^=|\|=|=)}; +our $Float_hex = qr{(?i)0x[0-9a-f]+p-?[0-9]+[fl]?}; +our $Float_dec = qr{(?i)(?:[0-9]+\.[0-9]*|[0-9]*\.[0-9]+)(?:e-?[0-9]+)?[fl]?}; +our $Float_int = qr{(?i)[0-9]+e-?[0-9]+[fl]?}; +our $Float = qr{$Float_hex|$Float_dec|$Float_int}; +our $Constant = qr{$Float|(?i)(?:0x[0-9a-f]+|[0-9]+)[ul]*}; +our $Assignment = qr{\*\=|/=|%=|\+=|-=|<<=|>>=|&=|\^=|\|=|=}; our $Compare = qr{<=|>=|==|!=|<|>}; our $Operators = qr{ <=|>=|==|!=| @@ -240,9 +247,8 @@ our $NonptrType; our $Type; our $Declare; -our $UTF8 = qr { - [\x09\x0A\x0D\x20-\x7E] # ASCII - | [\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte +our $NON_ASCII_UTF8 = qr{ + [\xC2-\xDF][\x80-\xBF] # non-overlong 2-byte | \xE0[\xA0-\xBF][\x80-\xBF] # excluding overlongs | [\xE1-\xEC\xEE\xEF][\x80-\xBF]{2} # straight 3-byte | \xED[\x80-\x9F][\x80-\xBF] # excluding surrogates @@ -251,6 +257,11 @@ our $UTF8 = qr { | \xF4[\x80-\x8F][\x80-\xBF]{2} # plane 16 }x; +our $UTF8 = qr{ + [\x09\x0A\x0D\x20-\x7E] # ASCII + | $NON_ASCII_UTF8 +}x; + our $typeTypedefs = qr{(?x: (?:__)?(?:u|s|be|le)(?:8|16|32|64)| atomic_t @@ -311,7 +322,7 @@ sub build_types { $NonptrType = qr{ (?:$Modifier\s+|const\s+)* (?: - (?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)| + (?:typeof|__typeof__)\s*\([^\)]*\)| (?:$typeTypedefs\b)| (?:${all}\b) ) @@ -319,17 +330,23 @@ sub build_types { }x; $Type = qr{ $NonptrType - (?:[\s\*]+\s*const|[\s\*]+|(?:\s*\[\s*\])+)? + (?:(?:\s|\*|\[\])+\s*const|(?:\s|\*|\[\])+|(?:\s*\[\s*\])+)? (?:\s+$Inline|\s+$Modifier)* }x; $Declare = qr{(?:$Storage\s+)?$Type}; } build_types(); -our $match_balanced_parentheses = qr/(\((?:[^\(\)]+|(-1))*\))/; our $Typecast = qr{\s*(\(\s*$NonptrType\s*\)){0,1}\s*}; -our $LvalOrFunc = qr{($Lval)\s*($match_balanced_parentheses{0,1})\s*}; + +# Using $balanced_parens, $LvalOrFunc, or $FuncArg +# requires at least perl version v5.10.0 +# Any use must be runtime checked with $^V + +our $balanced_parens = qr/(\((?:[^\(\)]++|(?-1))*\))/; +our $LvalOrFunc = qr{($Lval)\s*($balanced_parens{0,1})\s*}; +our $FuncArg = qr{$Typecast{0,1}($LvalOrFunc|$Constant)}; sub deparenthesize { my ($string) = @_; @@ -342,27 +359,6 @@ sub deparenthesize { $chk_signoff = 0 if ($file); -my @dep_includes = (); -my @dep_functions = (); -my $removal = "Documentation/feature-removal-schedule.txt"; -if ($tree && -f "$root/$removal") { - open(my $REMOVE, '<', "$root/$removal") || - die "$P: $removal: open failed - $!\n"; - while (<$REMOVE>) { - if (/^Check:\s+(.*\S)/) { - for my $entry (split(/[, ]+/, $1)) { - if ($entry =~ m@include/(.*)@) { - push(@dep_includes, $1); - - } elsif ($entry !~ m@/@) { - push(@dep_functions, $entry); - } - } - } - } - close($REMOVE); -} - my @rawlines = (); my @lines = (); my $vname; @@ -411,7 +407,7 @@ sub top_of_kernel_tree { } } return 1; - } +} sub parse_email { my ($formatted_email) = @_; @@ -672,6 +668,10 @@ sub ctx_statement_block { if ($off >= $len) { last; } + if ($level == 0 && substr($blk, $off) =~ /^.\s*#\s*define/) { + $level++; + $type = '#'; + } } $p = $c; $c = substr($blk, $off, 1); @@ -734,6 +734,13 @@ sub ctx_statement_block { last; } } + # Preprocessor commands end at the newline unless escaped. + if ($type eq '#' && $c eq "\n" && $p ne "\\") { + $level--; + $type = ''; + $off++; + last; + } $off++; } # We are truly at the end, so shuffle to the next line. @@ -1016,7 +1023,7 @@ sub annotate_values { } elsif ($cur =~ /^(\(\s*$Type\s*)\)/ && $av_pending eq '_') { print "CAST($1)\n" if ($dbg_values > 1); push(@av_paren_type, $type); - $type = 'C'; + $type = 'c'; } elsif ($cur =~ /^($Type)\s*(?:$Ident|,|\)|\(|\s*$)/) { print "DECLARE($1)\n" if ($dbg_values > 1); @@ -1208,7 +1215,9 @@ sub possible { case| else| asm|__asm__| - do + do| + \#| + \#\#| )(?:\s|$)| ^(?:typedef|struct|enum)\b )}x; @@ -1312,6 +1321,36 @@ sub check_absolute_file { } } +sub pos_last_openparen { + my ($line) = @_; + + my $pos = 0; + + my $opens = $line =~ tr/\(/\(/; + my $closes = $line =~ tr/\)/\)/; + + my $last_openparen = 0; + + if (($opens == 0) || ($closes >= $opens)) { + return -1; + } + + my $len = length($line); + + for ($pos = 0; $pos < $len; $pos++) { + my $string = substr($line, $pos); + if ($string =~ /^($FuncArg|$balanced_parens)/) { + $pos += length($1) - 1; + } elsif (substr($line, $pos, 1) eq '(') { + $last_openparen = $pos; + } elsif (index($string, '(') == -1) { + last; + } + } + + return $last_openparen + 1; +} + sub process { my $filename = shift; @@ -1330,6 +1369,11 @@ sub process { my $signoff = 0; my $is_patch = 0; + my $in_header_lines = 1; + my $in_commit_log = 0; #Scanning lines before patch + + my $non_utf8_charset = 0; + our @report = (); our $cnt_lines = 0; our $cnt_error = 0; @@ -1352,6 +1396,9 @@ sub process { my %suppress_ifbraces; my %suppress_whiletrailers; my %suppress_export; + my $suppress_statement = 0; + + my %camelcase = (); # Pre-scan the patch sanitizing the lines. # Pre-scan the patch looking for any __setup documentation. @@ -1461,6 +1508,7 @@ sub process { %suppress_ifbraces = (); %suppress_whiletrailers = (); %suppress_export = (); + $suppress_statement = 0; next; # track the line number as we move through the hunk, note that @@ -1497,10 +1545,11 @@ sub process { if ($line =~ /^diff --git.*?(\S+)$/) { $realfile = $1; $realfile =~ s@^([^/]*)/@@; - + $in_commit_log = 0; } elsif ($line =~ /^\+\+\+\s+(\S+)/) { $realfile = $1; $realfile =~ s@^([^/]*)/@@; + $in_commit_log = 0; $p1_prefix = $1; if (!$file && $tree && $p1_prefix ne '' && @@ -1536,16 +1585,22 @@ sub process { # Check the patch for a signoff: if ($line =~ /^\s*signed-off-by:/i) { $signoff++; + $in_commit_log = 0; } # Check signature styles - if ($line =~ /^(\s*)($signature_tags)(\s*)(.*)/) { + if (!$in_header_lines && + $line =~ /^(\s*)([a-z0-9_-]+by:|$signature_tags)(\s*)(.*)/i) { my $space_before = $1; my $sign_off = $2; my $space_after = $3; my $email = $4; my $ucfirst_sign_off = ucfirst(lc($sign_off)); + if ($sign_off !~ /$signature_tags/) { + WARN("BAD_SIGN_OFF", + "Non-standard signature: $sign_off\n" . $herecurr); + } if (defined $space_before && $space_before ne "") { WARN("BAD_SIGN_OFF", "Do not use whitespace before $ucfirst_sign_off\n" . $herecurr); @@ -1613,6 +1668,28 @@ sub process { "Invalid UTF-8, patch and commit message should be encoded in UTF-8\n" . $hereptr); } +# Check if it's the start of a commit log +# (not a header line and we haven't seen the patch filename) + if ($in_header_lines && $realfile =~ /^$/ && + $rawline !~ /^(commit\b|from\b|[\w-]+:).+$/i) { + $in_header_lines = 0; + $in_commit_log = 1; + } + +# Check if there is UTF-8 in a commit log when a mail header has explicitly +# declined it, i.e defined some charset where it is missing. + if ($in_header_lines && + $rawline =~ /^Content-Type:.+charset="(.+)".*$/ && + $1 !~ /utf-8/i) { + $non_utf8_charset = 1; + } + + if ($in_commit_log && $non_utf8_charset && $realfile =~ /^$/ && + $rawline =~ /$NON_ASCII_UTF8/) { + WARN("UTF8_BEFORE_PATCH", + "8-bit UTF-8 used in possible commit log\n" . $herecurr); + } + # ignore non-hunk lines and lines being removed next if (!$hunk_line || $line =~ /^-/); @@ -1633,19 +1710,26 @@ sub process { # Only applies when adding the entry originally, after that we do not have # sufficient context to determine whether it is indeed long enough. if ($realfile =~ /Kconfig/ && - $line =~ /\+\s*(?:---)?help(?:---)?$/) { + $line =~ /.\s*config\s+/) { my $length = 0; my $cnt = $realcnt; my $ln = $linenr + 1; my $f; + my $is_start = 0; my $is_end = 0; - while ($cnt > 0 && defined $lines[$ln - 1]) { + for (; $cnt > 0 && defined $lines[$ln - 1]; $ln++) { $f = $lines[$ln - 1]; $cnt-- if ($lines[$ln - 1] !~ /^-/); $is_end = $lines[$ln - 1] =~ /^\+/; - $ln++; next if ($f =~ /^-/); + + if ($lines[$ln - 1] =~ /.\s*(?:bool|tristate)\s*\"/) { + $is_start = 1; + } elsif ($lines[$ln - 1] =~ /.\s*(?:---)?help(?:---)?$/) { + $length = -1; + } + $f =~ s/^.//; $f =~ s/#.*//; $f =~ s/^\s+//; @@ -1657,22 +1741,58 @@ sub process { $length++; } WARN("CONFIG_DESCRIPTION", - "please write a paragraph that describes the config symbol fully\n" . $herecurr) if ($is_end && $length < 4); - #print "is_end<$is_end> length<$length>\n"; + "please write a paragraph that describes the config symbol fully\n" . $herecurr) if ($is_start && $is_end && $length < 4); + #print "is_start<$is_start> is_end<$is_end> length<$length>\n"; + } + +# discourage the addition of CONFIG_EXPERIMENTAL in Kconfig. + if ($realfile =~ /Kconfig/ && + $line =~ /.\s*depends on\s+.*\bEXPERIMENTAL\b/) { + WARN("CONFIG_EXPERIMENTAL", + "Use of CONFIG_EXPERIMENTAL is deprecated. For alternatives, see https://lkml.org/lkml/2012/10/23/580\n"); + } + + if (($realfile =~ /Makefile.*/ || $realfile =~ /Kbuild.*/) && + ($line =~ /\+(EXTRA_[A-Z]+FLAGS).*/)) { + my $flag = $1; + my $replacement = { + 'EXTRA_AFLAGS' => 'asflags-y', + 'EXTRA_CFLAGS' => 'ccflags-y', + 'EXTRA_CPPFLAGS' => 'cppflags-y', + 'EXTRA_LDFLAGS' => 'ldflags-y', + }; + + WARN("DEPRECATED_VARIABLE", + "Use of $flag is deprecated, please use \`$replacement->{$flag} instead.\n" . $herecurr) if ($replacement->{$flag}); } # check we are in a valid source file if not then ignore this hunk next if ($realfile !~ /\.(h|c|s|S|pl|sh)$/); -#80 column limit +#line length limit if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ && $rawline !~ /^.\s*\*\s*\@$Ident\s/ && !($line =~ /^\+\s*$logFunctions\s*\(\s*(?:(KERN_\S+\s*|[^"]*))?"[X\t]*"\s*(?:|,|\)\s*;)\s*$/ || $line =~ /^\+\s*"[^"]*"\s*(?:\s*|,|\)\s*;)\s*$/) && - $length > 80) + $length > $max_line_length) { WARN("LONG_LINE", - "line over 80 characters\n" . $herecurr); + "line over $max_line_length characters\n" . $herecurr); + } + +# Check for user-visible strings broken across lines, which breaks the ability +# to grep for the string. Limited to strings used as parameters (those +# following an open parenthesis), which almost completely eliminates false +# positives, as well as warning only once per parameter rather than once per +# line of the string. Make an exception when the previous string ends in a +# newline (multiple lines in one string constant) or \n\t (common in inline +# assembly to indent the instruction on the following line). + if ($line =~ /^\+\s*"/ && + $prevline =~ /"\s*$/ && + $prevline =~ /\(/ && + $prevrawline !~ /\\n(?:\\t)*"\s*$/) { + WARN("SPLIT_STRING", + "quoted string split across lines\n" . $hereprev); } # check for spaces before a quoted newline @@ -1721,6 +1841,58 @@ sub process { "please, no space before tabs\n" . $herevet); } +# check for && or || at the start of a line + if ($rawline =~ /^\+\s*(&&|\|\|)/) { + CHK("LOGICAL_CONTINUATIONS", + "Logical continuations should be on the previous line\n" . $hereprev); + } + +# check multi-line statement indentation matches previous line + if ($^V && $^V ge 5.10.0 && + $prevline =~ /^\+(\t*)(if \(|$Ident\().*(\&\&|\|\||,)\s*$/) { + $prevline =~ /^\+(\t*)(.*)$/; + my $oldindent = $1; + my $rest = $2; + + my $pos = pos_last_openparen($rest); + if ($pos >= 0) { + $line =~ /^(\+| )([ \t]*)/; + my $newindent = $2; + + my $goodtabindent = $oldindent . + "\t" x ($pos / 8) . + " " x ($pos % 8); + my $goodspaceindent = $oldindent . " " x $pos; + + if ($newindent ne $goodtabindent && + $newindent ne $goodspaceindent) { + CHK("PARENTHESIS_ALIGNMENT", + "Alignment should match open parenthesis\n" . $hereprev); + } + } + } + + if ($line =~ /^\+.*\*[ \t]*\)[ \t]+/) { + CHK("SPACING", + "No space is necessary after a cast\n" . $hereprev); + } + + if ($realfile =~ m@^(drivers/net/|net/)@ && + $rawline =~ /^\+[ \t]*\/\*[ \t]*$/ && + $prevrawline =~ /^\+[ \t]*$/) { + WARN("NETWORKING_BLOCK_COMMENT_STYLE", + "networking block comments don't use an empty /* line, use /* Comment...\n" . $hereprev); + } + + if ($realfile =~ m@^(drivers/net/|net/)@ && + $rawline !~ m@^\+[ \t]*\*/[ \t]*$@ && #trailing */ + $rawline !~ m@^\+.*/\*.*\*/[ \t]*$@ && #inline /*...*/ + $rawline !~ m@^\+.*\*{2,}/[ \t]*$@ && #trailing **/ + $rawline =~ m@^\+[ \t]*.+\*\/[ \t]*$@) { #non blank */ + WARN("NETWORKING_BLOCK_COMMENT_STYLE", + "networking block comments put the trailing */ on a separate line\n" . $herecurr); + } + # check for spaces at the beginning of a line. # Exceptions: # 1) within comments @@ -1735,6 +1907,12 @@ sub process { # check we are in a valid C source file if not then ignore this hunk next if ($realfile !~ /\.(h|c)$/); +# discourage the addition of CONFIG_EXPERIMENTAL in #if(def). + if ($line =~ /^\+\s*\#\s*if.*\bCONFIG_EXPERIMENTAL\b/) { + WARN("CONFIG_EXPERIMENTAL", + "Use of CONFIG_EXPERIMENTAL is deprecated. For alternatives, see https://lkml.org/lkml/2012/10/23/580\n"); + } + # check for RCS/CVS revision markers if ($rawline =~ /^\+.*\$(Revision|Log|Id)(?:\$|)/) { WARN("CVS_KEYWORD", @@ -1753,15 +1931,33 @@ sub process { "use the SSYNC() macro in asm/blackfin.h\n" . $herevet); } +# check for old HOTPLUG __dev<foo> section markings + if ($line =~ /\b(__dev(init|exit)(data|const|))\b/) { + WARN("HOTPLUG_SECTION", + "Using $1 is unnecessary\n" . $herecurr); + } + # Check for potential 'bare' types my ($stat, $cond, $line_nr_next, $remain_next, $off_next, $realline_next); - if ($realcnt && $line =~ /.\s*\S/) { +#print "LINE<$line>\n"; + if ($linenr >= $suppress_statement && + $realcnt && $line =~ /.\s*\S/) { ($stat, $cond, $line_nr_next, $remain_next, $off_next) = ctx_statement_block($linenr, $realcnt, 0); $stat =~ s/\n./\n /g; $cond =~ s/\n./\n /g; +#print "linenr<$linenr> <$stat>\n"; + # If this statement has no statement boundaries within + # it there is no point in retrying a statement scan + # until we hit end of it. + my $frag = $stat; $frag =~ s/;+\s*$//; + if ($frag !~ /(?:{|;)/) { +#print "skip<$line_nr_next>\n"; + $suppress_statement = $line_nr_next; + } + # Find the real next line. $realline_next = $line_nr_next; if (defined $realline_next && @@ -1850,6 +2046,12 @@ sub process { my $pre_ctx = "$1$2"; my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0); + + if ($line =~ /^\+\t{6,}/) { + WARN("DEEP_INDENTATION", + "Too many leading tabs - consider code refactoring\n" . $herecurr); + } + my $ctx_cnt = $realcnt - $#ctx - 1; my $ctx = join("\n", @ctx); @@ -1887,6 +2089,9 @@ sub process { # Check relative indent for conditionals and blocks. if ($line =~ /\b(?:(?:if|while|for)\s*\(|do\b)/ && $line !~ /^.\s*#/ && $line !~ /\}\s*while\s*/) { + ($stat, $cond, $line_nr_next, $remain_next, $off_next) = + ctx_statement_block($linenr, $realcnt, 0) + if (!defined $stat); my ($s, $c) = ($stat, $cond); substr($s, 0, length($c), ''); @@ -2027,8 +2232,11 @@ sub process { my $path = $1; if ($path =~ m{//}) { ERROR("MALFORMED_INCLUDE", - "malformed #include filename\n" . - $herecurr); + "malformed #include filename\n" . $herecurr); + } + if ($path =~ "^uapi/" && $realfile =~ m@\binclude/uapi/@) { + ERROR("UAPI_INCLUDE", + "No #include in ...include/uapi/... should use a uapi/ path prefix\n" . $herecurr); } } @@ -2054,7 +2262,7 @@ sub process { # XXX(foo); # EXPORT_SYMBOL(something_foo); my $name = $1; - if ($stat =~ /^.([A-Z_]+)\s*\(\s*($Ident)/ && + if ($stat =~ /^(?:.\s*}\s*\n)?.([A-Z_]+)\s*\(\s*($Ident)/ && $name =~ /^${Ident}_$2/) { #print "FOO C name<$name>\n"; $suppress_export{$realline_next} = 1; @@ -2132,8 +2340,9 @@ sub process { # * goes on variable not on type # (char*[ const]) - if ($line =~ m{\($NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)\)}) { - my ($from, $to) = ($1, $1); + while ($line =~ m{(\($NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)\))}g) { + #print "AA<$1>\n"; + my ($from, $to) = ($2, $2); # Should start with a space. $to =~ s/^(\S)/ $1/; @@ -2148,8 +2357,10 @@ sub process { ERROR("POINTER_LOCATION", "\"(foo$from)\" should be \"(foo$to)\"\n" . $herecurr); } - } elsif ($line =~ m{\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident)}) { - my ($from, $to, $ident) = ($1, $1, $2); + } + while ($line =~ m{(\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident))}g) { + #print "BB<$1>\n"; + my ($from, $to, $ident) = ($2, $2, $3); # Should start with a space. $to =~ s/^(\S)/ $1/; @@ -2210,6 +2421,30 @@ sub process { } } + if ($line =~ /\bprintk\s*\(\s*KERN_([A-Z]+)/) { + my $orig = $1; + my $level = lc($orig); + $level = "warn" if ($level eq "warning"); + my $level2 = $level; + $level2 = "dbg" if ($level eq "debug"); + WARN("PREFER_PR_LEVEL", + "Prefer netdev_$level2(netdev, ... then dev_$level2(dev, ... then pr_$level(... to printk(KERN_$orig ...\n" . $herecurr); + } + + if ($line =~ /\bpr_warning\s*\(/) { + WARN("PREFER_PR_LEVEL", + "Prefer pr_warn(... to pr_warning(...\n" . $herecurr); + } + + if ($line =~ /\bdev_printk\s*\(\s*KERN_([A-Z]+)/) { + my $orig = $1; + my $level = lc($orig); + $level = "warn" if ($level eq "warning"); + $level = "dbg" if ($level eq "debug"); + WARN("PREFER_DEV_LEVEL", + "Prefer dev_$level(... to dev_printk(KERN_$orig, ...\n" . $herecurr); + } + # function brace can't be on same line, except for #defines of do while, # or if closed on same line if (($line=~/$Type\s*$Ident\(.*\).*\s{/) and @@ -2239,7 +2474,7 @@ sub process { my ($where, $prefix) = ($-[1], $1); if ($prefix !~ /$Type\s+$/ && ($where != 0 || $prefix !~ /^.\s+$/) && - $prefix !~ /{\s+$/) { + $prefix !~ /[{,]\s+$/) { ERROR("BRACKET_SPACE", "space prohibited before open square bracket '['\n" . $herecurr); } @@ -2276,6 +2511,13 @@ sub process { "space prohibited between function name and open parenthesis '('\n" . $herecurr); } } + +# check for whitespace before a non-naked semicolon + if ($line =~ /^\+.*\S\s+;/) { + CHK("SPACING", + "space prohibited before semicolon\n" . $herecurr); + } + # Check operator spacing. if (!($line=~/\#\s*include/)) { my $ops = qr{ @@ -2532,7 +2774,7 @@ sub process { # Flatten any parentheses $value =~ s/\(/ \(/g; $value =~ s/\)/\) /g; - while ($value =~ s/\[[^\{\}]*\]/1/ || + while ($value =~ s/\[[^\[\]]*\]/1/ || $value !~ /(?:$Ident|-?$Constant)\s* $Compare\s* (?:$Ident|-?$Constant)/x && @@ -2557,28 +2799,6 @@ sub process { } } -# typecasts on min/max could be min_t/max_t - if ($line =~ /^\+(?:.*?)\b(min|max)\s*\($Typecast{0,1}($LvalOrFunc)\s*,\s*$Typecast{0,1}($LvalOrFunc)\s*\)/) { - if (defined $2 || defined $8) { - my $call = $1; - my $cast1 = deparenthesize($2); - my $arg1 = $3; - my $cast2 = deparenthesize($8); - my $arg2 = $9; - my $cast; - - if ($cast1 ne "" && $cast2 ne "") { - $cast = "$cast1 or $cast2"; - } elsif ($cast1 ne "") { - $cast = $cast1; - } else { - $cast = $cast2; - } - WARN("MINMAX", - "$call() should probably be ${call}_t($cast, $arg1, $arg2)\n" . $herecurr); - } - } - # Need a space before open parenthesis after if, while etc if ($line=~/\b(if|while|for|switch)\(/) { ERROR("SPACING", "space required before the open parenthesis '('\n" . $herecurr); @@ -2587,6 +2807,9 @@ sub process { # Check for illegal assignment in if conditional -- and check for trailing # statements after the conditional. if ($line =~ /do\s*(?!{)/) { + ($stat, $cond, $line_nr_next, $remain_next, $off_next) = + ctx_statement_block($linenr, $realcnt, 0) + if (!defined $stat); my ($stat_next) = ctx_statement_block($line_nr_next, $remain_next, $off_next); $stat_next =~ s/\n./\n /g; @@ -2702,12 +2925,18 @@ sub process { } } -#studly caps, commented out until figure out how to distinguish between use of existing and adding new -# if (($line=~/[\w_][a-z\d]+[A-Z]/) and !($line=~/print/)) { -# print "No studly caps, use _\n"; -# print "$herecurr"; -# $clean = 0; -# } +#CamelCase + while ($line =~ m{($Constant|$Lval)}g) { + my $var = $1; + if ($var !~ /$Constant/ && + $var =~ /[A-Z]\w*[a-z]|[a-z]\w*[A-Z]/ && + $var !~ /"^(?:Clear|Set|TestClear|TestSet|)Page[A-Z]/ && + !defined $camelcase{$var}) { + $camelcase{$var} = 1; + WARN("CAMELCASE", + "Avoid CamelCase: <$var>\n" . $herecurr); + } + } #no spaces allowed after \ in define if ($line=~/\#\s*define.*\\\s$/) { @@ -2742,47 +2971,13 @@ sub process { my $cnt = $realcnt; my ($off, $dstat, $dcond, $rest); my $ctx = ''; - - my $args = defined($1); - - # Find the end of the macro and limit our statement - # search to that. - while ($cnt > 0 && defined $lines[$ln - 1] && - $lines[$ln - 1] =~ /^(?:-|..*\\$)/) - { - $ctx .= $rawlines[$ln - 1] . "\n"; - $cnt-- if ($lines[$ln - 1] !~ /^-/); - $ln++; - } - $ctx .= $rawlines[$ln - 1]; - ($dstat, $dcond, $ln, $cnt, $off) = - ctx_statement_block($linenr, $ln - $linenr + 1, 0); + ctx_statement_block($linenr, $realcnt, 0); + $ctx = $dstat; #print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n"; #print "LINE<$lines[$ln-1]> len<" . length($lines[$ln-1]) . "\n"; - # Extract the remainder of the define (if any) and - # rip off surrounding spaces, and trailing \'s. - $rest = ''; - while ($off != 0 || ($cnt > 0 && $rest =~ /\\\s*$/)) { - #print "ADDING cnt<$cnt> $off <" . substr($lines[$ln - 1], $off) . "> rest<$rest>\n"; - if ($off != 0 || $lines[$ln - 1] !~ /^-/) { - $rest .= substr($lines[$ln - 1], $off) . "\n"; - $cnt--; - } - $ln++; - $off = 0; - } - $rest =~ s/\\\n.//g; - $rest =~ s/^\s*//s; - $rest =~ s/\s*$//s; - - # Clean up the original statement. - if ($args) { - substr($dstat, 0, length($dcond), ''); - } else { - $dstat =~ s/^.\s*\#\s*define\s+$Ident\s*//; - } + $dstat =~ s/^.\s*\#\s*define\s+$Ident(?:\([^\)]*\))?\s*//; $dstat =~ s/$;//g; $dstat =~ s/\\\n.//g; $dstat =~ s/^\s*//s; @@ -2791,14 +2986,20 @@ sub process { # Flatten any parentheses and braces while ($dstat =~ s/\([^\(\)]*\)/1/ || $dstat =~ s/\{[^\{\}]*\}/1/ || - $dstat =~ s/\[[^\{\}]*\]/1/) + $dstat =~ s/\[[^\[\]]*\]/1/) + { + } + + # Flatten any obvious string concatentation. + while ($dstat =~ s/("X*")\s*$Ident/$1/ || + $dstat =~ s/$Ident\s*("X*")/$1/) { } my $exceptions = qr{ $Declare| module_param_named| - MODULE_PARAM_DESC| + MODULE_PARM_DESC| DECLARE_PER_CPU| DEFINE_PER_CPU| __typeof__\(| @@ -2808,23 +3009,84 @@ sub process { ^\"|\"$ }x; #print "REST<$rest> dstat<$dstat> ctx<$ctx>\n"; - if ($rest ne '' && $rest ne ',') { - if ($rest !~ /while\s*\(/ && - $dstat !~ /$exceptions/) - { - ERROR("MULTISTATEMENT_MACRO_USE_DO_WHILE", - "Macros with multiple statements should be enclosed in a do - while loop\n" . "$here\n$ctx\n"); + if ($dstat ne '' && + $dstat !~ /^(?:$Ident|-?$Constant),$/ && # 10, // foo(), + $dstat !~ /^(?:$Ident|-?$Constant);$/ && # foo(); + $dstat !~ /^[!~-]?(?:$Ident|$Constant)$/ && # 10 // foo() // !foo // ~foo // -foo + $dstat !~ /^'X'$/ && # character constants + $dstat !~ /$exceptions/ && + $dstat !~ /^\.$Ident\s*=/ && # .foo = + $dstat !~ /^do\s*$Constant\s*while\s*$Constant;?$/ && # do {...} while (...); // do {...} while (...) + $dstat !~ /^for\s*$Constant$/ && # for (...) + $dstat !~ /^for\s*$Constant\s+(?:$Ident|-?$Constant)$/ && # for (...) bar() + $dstat !~ /^do\s*{/ && # do {... + $dstat !~ /^\({/) # ({... + { + $ctx =~ s/\n*$//; + my $herectx = $here . "\n"; + my $cnt = statement_rawlines($ctx); + + for (my $n = 0; $n < $cnt; $n++) { + $herectx .= raw_line($linenr, $n) . "\n"; } - } elsif ($ctx !~ /;/) { - if ($dstat ne '' && - $dstat !~ /^(?:$Ident|-?$Constant)$/ && - $dstat !~ /$exceptions/ && - $dstat !~ /^\.$Ident\s*=/ && - $dstat =~ /$Operators/) - { + if ($dstat =~ /;/) { + ERROR("MULTISTATEMENT_MACRO_USE_DO_WHILE", + "Macros with multiple statements should be enclosed in a do - while loop\n" . "$herectx"); + } else { ERROR("COMPLEX_MACRO", - "Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n"); + "Macros with complex values should be enclosed in parenthesis\n" . "$herectx"); + } + } + +# check for line continuations outside of #defines, preprocessor #, and asm + + } else { + if ($prevline !~ /^..*\\$/ && + $line !~ /^\+\s*\#.*\\$/ && # preprocessor + $line !~ /^\+.*\b(__asm__|asm)\b.*\\$/ && # asm + $line =~ /^\+.*\\$/) { + WARN("LINE_CONTINUATIONS", + "Avoid unnecessary line continuations\n" . $herecurr); + } + } + +# do {} while (0) macro tests: +# single-statement macros do not need to be enclosed in do while (0) loop, +# macro should not end with a semicolon + if ($^V && $^V ge 5.10.0 && + $realfile !~ m@/vmlinux.lds.h$@ && + $line =~ /^.\s*\#\s*define\s+$Ident(\()?/) { + my $ln = $linenr; + my $cnt = $realcnt; + my ($off, $dstat, $dcond, $rest); + my $ctx = ''; + ($dstat, $dcond, $ln, $cnt, $off) = + ctx_statement_block($linenr, $realcnt, 0); + $ctx = $dstat; + + $dstat =~ s/\\\n.//g; + + if ($dstat =~ /^\+\s*#\s*define\s+$Ident\s*${balanced_parens}\s*do\s*{(.*)\s*}\s*while\s*\(\s*0\s*\)\s*([;\s]*)\s*$/) { + my $stmts = $2; + my $semis = $3; + + $ctx =~ s/\n*$//; + my $cnt = statement_rawlines($ctx); + my $herectx = $here . "\n"; + + for (my $n = 0; $n < $cnt; $n++) { + $herectx .= raw_line($linenr, $n) . "\n"; + } + + if (($stmts =~ tr/;/;/) == 1 && + $stmts !~ /^\s*(if|while|for|switch)\b/) { + WARN("SINGLE_STATEMENT_DO_WHILE_MACRO", + "Single statement macros should not use a do {} while (0) loop\n" . "$herectx"); + } + if (defined $semis && $semis ne "") { + WARN("DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON", + "do {} while (0) macros should not be semicolon terminated\n" . "$herectx"); } } } @@ -2846,7 +3108,8 @@ sub process { #print "chunks<$#chunks> linenr<$linenr> endln<$endln> level<$level>\n"; #print "APW: <<$chunks[1][0]>><<$chunks[1][1]>>\n"; if ($#chunks > 0 && $level == 0) { - my $allowed = 0; + my @allowed = (); + my $allow = 0; my $seen = 0; my $herectx = $here . "\n"; my $ln = $linenr - 1; @@ -2857,6 +3120,7 @@ sub process { my ($whitespace) = ($cond =~ /^((?:\s*\n[+-])*\s*)/s); my $offset = statement_rawlines($whitespace) - 1; + $allowed[$allow] = 0; #print "COND<$cond> whitespace<$whitespace> offset<$offset>\n"; # We have looked at and allowed this specific line. @@ -2869,23 +3133,34 @@ sub process { $seen++ if ($block =~ /^\s*{/); - #print "cond<$cond> block<$block> allowed<$allowed>\n"; + #print "cond<$cond> block<$block> allowed<$allowed[$allow]>\n"; if (statement_lines($cond) > 1) { #print "APW: ALLOWED: cond<$cond>\n"; - $allowed = 1; + $allowed[$allow] = 1; } if ($block =~/\b(?:if|for|while)\b/) { #print "APW: ALLOWED: block<$block>\n"; - $allowed = 1; + $allowed[$allow] = 1; } if (statement_block_size($block) > 1) { #print "APW: ALLOWED: lines block<$block>\n"; - $allowed = 1; + $allowed[$allow] = 1; } + $allow++; } - if ($seen && !$allowed) { - WARN("BRACES", - "braces {} are not necessary for any arm of this statement\n" . $herectx); + if ($seen) { + my $sum_allowed = 0; + foreach (@allowed) { + $sum_allowed += $_; + } + if ($sum_allowed == 0) { + WARN("BRACES", + "braces {} are not necessary for any arm of this statement\n" . $herectx); + } elsif ($sum_allowed != $allow && + $seen != $allow) { + CHK("BRACES", + "braces {} should be used on all arms of this statement\n" . $herectx); + } } } } @@ -2932,11 +3207,11 @@ sub process { } } if ($level == 0 && $block =~ /^\s*\{/ && !$allowed) { - my $herectx = $here . "\n";; + my $herectx = $here . "\n"; my $cnt = statement_rawlines($block); for (my $n = 0; $n < $cnt; $n++) { - $herectx .= raw_line($linenr, $n) . "\n";; + $herectx .= raw_line($linenr, $n) . "\n"; } WARN("BRACES", @@ -2944,20 +3219,14 @@ sub process { } } -# don't include deprecated include files (uses RAW line) - for my $inc (@dep_includes) { - if ($rawline =~ m@^.\s*\#\s*include\s*\<$inc>@) { - ERROR("DEPRECATED_INCLUDE", - "Don't use <$inc>: see Documentation/feature-removal-schedule.txt\n" . $herecurr); - } +# check for unnecessary blank lines around braces + if (($line =~ /^..*}\s*$/ && $prevline =~ /^.\s*$/)) { + CHK("BRACES", + "Blank lines aren't necessary before a close brace '}'\n" . $hereprev); } - -# don't use deprecated functions - for my $func (@dep_functions) { - if ($line =~ /\b$func\b/) { - ERROR("DEPRECATED_FUNCTION", - "Don't use $func(): see Documentation/feature-removal-schedule.txt\n" . $herecurr); - } + if (($line =~ /^.\s*$/ && $prevline =~ /^..*{\s*$/)) { + CHK("BRACES", + "Blank lines aren't necessary after an open brace '{'\n" . $hereprev); } # no volatiles please @@ -2974,27 +3243,19 @@ sub process { $herecurr); } -# check for needless kfree() checks - if ($prevline =~ /\bif\s*\(([^\)]*)\)/) { - my $expr = $1; - if ($line =~ /\bkfree\(\Q$expr\E\);/) { - WARN("NEEDLESS_KFREE", - "kfree(NULL) is safe this check is probably not required\n" . $hereprev); - } - } -# check for needless usb_free_urb() checks - if ($prevline =~ /\bif\s*\(([^\)]*)\)/) { - my $expr = $1; - if ($line =~ /\busb_free_urb\(\Q$expr\E\);/) { - WARN("NEEDLESS_USB_FREE_URB", - "usb_free_urb(NULL) is safe this check is probably not required\n" . $hereprev); +# check for needless "if (<foo>) fn(<foo>)" uses + if ($prevline =~ /\bif\s*\(\s*($Lval)\s*\)/) { + my $expr = '\s*\(\s*' . quotemeta($1) . '\s*\)\s*;'; + if ($line =~ /\b(kfree|usb_free_urb|debugfs_remove(?:_recursive)?)$expr/) { + WARN('NEEDLESS_IF', + "$1(NULL) is safe this check is probably not required\n" . $hereprev); } } # prefer usleep_range over udelay - if ($line =~ /\budelay\s*\(\s*(\w+)\s*\)/) { + if ($line =~ /\budelay\s*\(\s*(\d+)\s*\)/) { # ignore udelay's < 10, however - if (! (($1 =~ /(\d+)/) && ($1 < 10)) ) { + if (! ($1 < 10) ) { CHK("USLEEP_RANGE", "usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt\n" . $line); } @@ -3075,18 +3336,100 @@ sub process { "__aligned(size) is preferred over __attribute__((aligned(size)))\n" . $herecurr); } +# Check for __attribute__ format(printf, prefer __printf + if ($line =~ /\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf/) { + WARN("PREFER_PRINTF", + "__printf(string-index, first-to-check) is preferred over __attribute__((format(printf, string-index, first-to-check)))\n" . $herecurr); + } + +# Check for __attribute__ format(scanf, prefer __scanf + if ($line =~ /\b__attribute__\s*\(\s*\(\s*format\s*\(\s*scanf\b/) { + WARN("PREFER_SCANF", + "__scanf(string-index, first-to-check) is preferred over __attribute__((format(scanf, string-index, first-to-check)))\n" . $herecurr); + } + # check for sizeof(&) if ($line =~ /\bsizeof\s*\(\s*\&/) { WARN("SIZEOF_ADDRESS", "sizeof(& should be avoided\n" . $herecurr); } +# check for sizeof without parenthesis + if ($line =~ /\bsizeof\s+((?:\*\s*|)$Lval|$Type(?:\s+$Lval|))/) { + WARN("SIZEOF_PARENTHESIS", + "sizeof $1 should be sizeof($1)\n" . $herecurr); + } + # check for line continuations in quoted strings with odd counts of " if ($rawline =~ /\\$/ && $rawline =~ tr/"/"/ % 2) { WARN("LINE_CONTINUATIONS", "Avoid line continuations in quoted strings\n" . $herecurr); } +# check for struct spinlock declarations + if ($line =~ /^.\s*\bstruct\s+spinlock\s+\w+\s*;/) { + WARN("USE_SPINLOCK_T", + "struct spinlock should be spinlock_t\n" . $herecurr); + } + +# Check for misused memsets + if ($^V && $^V ge 5.10.0 && + defined $stat && + $stat =~ /^\+(?:.*?)\bmemset\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\,\s*$FuncArg\s*\)/s) { + + my $ms_addr = $2; + my $ms_val = $7; + my $ms_size = $12; + + if ($ms_size =~ /^(0x|)0$/i) { + ERROR("MEMSET", + "memset to 0's uses 0 as the 2nd argument, not the 3rd\n" . "$here\n$stat\n"); + } elsif ($ms_size =~ /^(0x|)1$/i) { + WARN("MEMSET", + "single byte memset is suspicious. Swapped 2nd/3rd argument?\n" . "$here\n$stat\n"); + } + } + +# typecasts on min/max could be min_t/max_t + if ($^V && $^V ge 5.10.0 && + defined $stat && + $stat =~ /^\+(?:.*?)\b(min|max)\s*\(\s*$FuncArg\s*,\s*$FuncArg\s*\)/) { + if (defined $2 || defined $7) { + my $call = $1; + my $cast1 = deparenthesize($2); + my $arg1 = $3; + my $cast2 = deparenthesize($7); + my $arg2 = $8; + my $cast; + + if ($cast1 ne "" && $cast2 ne "" && $cast1 ne $cast2) { + $cast = "$cast1 or $cast2"; + } elsif ($cast1 ne "") { + $cast = $cast1; + } else { + $cast = $cast2; + } + WARN("MINMAX", + "$call() should probably be ${call}_t($cast, $arg1, $arg2)\n" . "$here\n$stat\n"); + } + } + +# check usleep_range arguments + if ($^V && $^V ge 5.10.0 && + defined $stat && + $stat =~ /^\+(?:.*?)\busleep_range\s*\(\s*($FuncArg)\s*,\s*($FuncArg)\s*\)/) { + my $min = $1; + my $max = $7; + if ($min eq $max) { + WARN("USLEEP_RANGE", + "usleep_range should not use min == max args; see Documentation/timers/timers-howto.txt\n" . "$here\n$stat\n"); + } elsif ($min =~ /^\d+$/ && $max =~ /^\d+$/ && + $min > $max) { + WARN("USLEEP_RANGE", + "usleep_range args reversed, use min then max; see Documentation/timers/timers-howto.txt\n" . "$here\n$stat\n"); + } + } + # check for new externs in .c files. if ($realfile =~ /\.c$/ && defined $stat && $stat =~ /^.\s*(?:extern\s+)?$Type\s+($Ident)(\s*)\(/s) @@ -3133,16 +3476,30 @@ sub process { "unnecessary cast may hide bugs, see http://c-faq.com/malloc/mallocnocast.html\n" . $herecurr); } +# check for alloc argument mismatch + if ($line =~ /\b(kcalloc|kmalloc_array)\s*\(\s*sizeof\b/) { + WARN("ALLOC_ARRAY_ARGS", + "$1 uses number as first arg, sizeof is generally wrong\n" . $herecurr); + } + # check for multiple semicolons if ($line =~ /;\s*;\s*$/) { - WARN("ONE_SEMICOLON", - "Statements terminations use 1 semicolon\n" . $herecurr); + WARN("ONE_SEMICOLON", + "Statements terminations use 1 semicolon\n" . $herecurr); } -# check for whitespace before semicolon - not allowed at end-of-line - if ($line =~ /\s+;$/) { - WARN("SPACEBEFORE_SEMICOLON", - "Whitespace before semicolon\n" . $herecurr); +# check for switch/default statements without a break; + if ($^V && $^V ge 5.10.0 && + defined $stat && + $stat =~ /^\+[$;\s]*(?:case[$;\s]+\w+[$;\s]*:[$;\s]*|)*[$;\s]*\bdefault[$;\s]*:[$;\s]*;/g) { + my $ctx = ''; + my $herectx = $here . "\n"; + my $cnt = statement_rawlines($stat); + for (my $n = 0; $n < $cnt; $n++) { + $herectx .= raw_line($linenr, $n) . "\n"; + } + WARN("DEFAULT_NO_BREAK", + "switch default: should use break\n" . $herectx); } # check for gcc specific __FUNCTION__ @@ -3151,22 +3508,30 @@ sub process { "__func__ should be used instead of gcc specific __FUNCTION__\n" . $herecurr); } +# check for use of yield() + if ($line =~ /\byield\s*\(\s*\)/) { + WARN("YIELD", + "Using yield() is generally wrong. See yield() kernel-doc (sched/core.c)\n" . $herecurr); + } + # check for semaphores initialized locked if ($line =~ /^.\s*sema_init.+,\W?0\W?\)/) { WARN("CONSIDER_COMPLETION", "consider using a completion\n" . $herecurr); - } -# recommend kstrto* over simple_strto* - if ($line =~ /\bsimple_(strto.*?)\s*\(/) { + +# recommend kstrto* over simple_strto* and strict_strto* + if ($line =~ /\b((simple|strict)_(strto(l|ll|ul|ull)))\s*\(/) { WARN("CONSIDER_KSTRTO", - "consider using kstrto* in preference to simple_$1\n" . $herecurr); + "$1 is obsolete, use k$3 instead\n" . $herecurr); } + # check for __initcall(), use device_initcall() explicitly please if ($line =~ /^.\s*__initcall\s*\(/) { WARN("USE_DEVICE_INITCALL", "please use device_initcall() instead of __initcall()\n" . $herecurr); } + # check for various ops structs, ensure they are const. my $struct_ops = qr{acpi_dock_ops| address_space_operations| @@ -3264,12 +3629,6 @@ sub process { WARN("EXPORTED_WORLD_WRITABLE", "Exporting world writable files is usually an error. Consider more restrictive permissions.\n" . $herecurr); } - - # Check for memset with swapped arguments - if ($line =~ /memset.*\,(\ |)(0x|)0(\ |0|)\);/) { - ERROR("MEMSET", - "memset size is 3rd argument, not the second.\n" . $herecurr); - } } # If we have no input at all, then there is nothing to report on @@ -3309,6 +3668,12 @@ sub process { } if ($quiet == 0) { + + if ($^V lt 5.10.0) { + print("NOTE: perl $^V is not modern enough to detect all possible issues.\n"); + print("An upgrade to at least perl v5.10.0 is suggested.\n\n"); + } + # If there were whitespace errors which cleanpatch can fix # then suggest that. if ($rpt_cleaners) { @@ -3318,13 +3683,12 @@ sub process { } } - if (keys %ignore_type) { + if ($quiet == 0 && keys %ignore_type) { print "NOTE: Ignored message types:"; foreach my $ignore (sort keys %ignore_type) { print " $ignore"; } - print "\n"; - print "\n" if ($quiet == 0); + print "\n\n"; } if ($clean == 1 && $quiet == 0) { diff --git a/tools/env/README b/tools/env/README index df020e4afd..1020b57b05 100644 --- a/tools/env/README +++ b/tools/env/README @@ -8,7 +8,7 @@ In order to cross-compile fw_printenv, run in the root directory of the U-Boot distribution. For example, make HOSTCC=arm-linux-gcc env -For the run-time utiltity configuration uncomment the line +For the run-time utility configuration uncomment the line #define CONFIG_FILE "/etc/fw_env.config" in fw_env.h. @@ -34,7 +34,7 @@ following lines are relevant: #define DEVICE2_ESIZE 0x4000 #define DEVICE2_ENVSECTORS 2 -Un-define HAVE_REDUND, if you want to use the utlities on a system +Un-define HAVE_REDUND, if you want to use the utilities on a system that does not have support for redundant environment enabled. If HAVE_REDUND is undefined, DEVICE2_NAME is ignored, as is ENV2_SIZE and DEVICE2_ESIZE. diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c index 37b60b80a7..bf30234190 100644 --- a/tools/env/fw_env.c +++ b/tools/env/fw_env.c @@ -836,9 +836,9 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count, erase.start = blockstart; ioctl (fd, MEMUNLOCK, &erase); - - /* Dataflash does not need an explicit erase cycle */ - if (mtd_type != MTD_DATAFLASH) + /* These do not need an explicit erase cycle */ + if (mtd_type != MTD_ABSENT && + mtd_type != MTD_DATAFLASH) if (ioctl (fd, MEMERASE, &erase) != 0) { fprintf (stderr, "MTD erase error on %s: %s\n", DEVNAME (dev), @@ -949,19 +949,33 @@ static int flash_write (int fd_current, int fd_target, int dev_target) static int flash_read (int fd) { struct mtd_info_user mtdinfo; + struct stat st; int rc; - rc = ioctl (fd, MEMGETINFO, &mtdinfo); + rc = fstat(fd, &st); if (rc < 0) { - perror ("Cannot get MTD information"); + fprintf(stderr, "Cannot stat the file %s\n", + DEVNAME(dev_current)); return -1; } - if (mtdinfo.type != MTD_NORFLASH && - mtdinfo.type != MTD_NANDFLASH && - mtdinfo.type != MTD_DATAFLASH) { - fprintf (stderr, "Unsupported flash type %u\n", mtdinfo.type); - return -1; + if (S_ISCHR(st.st_mode)) { + rc = ioctl(fd, MEMGETINFO, &mtdinfo); + if (rc < 0) { + fprintf(stderr, "Cannot get MTD information for %s\n", + DEVNAME(dev_current)); + return -1; + } + if (mtdinfo.type != MTD_NORFLASH && + mtdinfo.type != MTD_NANDFLASH && + mtdinfo.type != MTD_DATAFLASH) { + fprintf (stderr, "Unsupported flash type %u on %s\n", + mtdinfo.type, DEVNAME(dev_current)); + return -1; + } + } else { + memset(&mtdinfo, 0, sizeof(mtdinfo)); + mtdinfo.type = MTD_ABSENT; } DEVTYPE(dev_current) = mtdinfo.type; diff --git a/tools/env/fw_env.config b/tools/env/fw_env.config index 8e21d5a5ab..90e499da1e 100644 --- a/tools/env/fw_env.config +++ b/tools/env/fw_env.config @@ -1,4 +1,4 @@ -# Configuration file for fw_(printenv/saveenv) utility. +# Configuration file for fw_(printenv/setenv) utility. # Up to two entries are valid, in this case the redundant # environment sector is assumed present. # Notice, that the "Number of sectors" is ignored on NOR and SPI-dataflash. @@ -17,3 +17,6 @@ # NAND example #/dev/mtd0 0x4000 0x4000 0x20000 2 + +# Block device example +#/dev/mmcblk0 0xc0000 0x20000 |
