diff options
884 files changed, 23633 insertions, 29058 deletions
diff --git a/.gitignore b/.gitignore index d91e91b1e6..1ac43f2825 100644 --- a/.gitignore +++ b/.gitignore @@ -38,6 +38,7 @@ /u-boot.sha1 /u-boot.dis /u-boot.lds +/u-boot.lst /u-boot.ubl /u-boot.ais /u-boot.dtb @@ -79,11 +79,6 @@ N: Oliver Brown E: obrown@adventnetworks.com D: Port to the gw8260 board -N: Curt Brune -E: curt@cucy.com -D: Added support for Samsung S3C4510B CPU (ARM7tdmi based SoC) -W: http://www.cucy.com - N: Jonathan De Bruyne E: jonathan.debruyne@siemens.atea.be D: Port to Siemens IAD210 board diff --git a/MAINTAINERS b/MAINTAINERS index 311c0e7fb6..e34d9f3ec3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -104,8 +104,6 @@ Wolfgang Denk <wd@denx.de> ARIA MPC5121e - AMX860 MPC860 - ETX094 MPC850 FPS850L MPC850 FPS860L MPC860 ICU862 MPC862 @@ -116,7 +114,6 @@ Wolfgang Denk <wd@denx.de> IVMS8 MPC860 IVMS8_128 MPC860 IVMS8_256 MPC860 - LANTEC MPC850 LWMON MPC823 R360MPI MPC823 RRvision MPC823 @@ -128,7 +125,6 @@ Wolfgang Denk <wd@denx.de> TQM855L MPC855 TQM860L MPC860 TQM860L_FEC MPC860 - c2mon MPC855 hermes MPC860 lwmon MPC823 @@ -214,9 +210,7 @@ Siddarth Gore <gores@marvell.com> Paul Gortmaker <paul.gortmaker@windriver.com> sbc8349 MPC8349 - sbc8540 MPC8540 sbc8548 MPC8548 - sbc8560 MPC8560 sbc8641d MPC8641D Frank Gottschling <fgottschling@eltec.de> @@ -229,7 +223,6 @@ Wolfgang Grandegger <wg@denx.de> PN62 MPC8240 IPHASE4539 MPC8260 - SCM MPC8260 Anatolij Gustschin <agust@denx.de> @@ -545,7 +538,6 @@ Unknown / orphaned boards: FADS850SAR MPC8xx FADS860T MPC8xx GENIETV MPC8xx - IAD210 MPC8xx MBX MPC8xx MBX860T MPC8xx NX823 MPC8xx @@ -573,6 +565,10 @@ Albert ARIBAUD <albert.u.boot@aribaud.net> edminiv2 ARM926EJS (Orion5x SoC) +Raphael Assenat <raph@8d.com> + + eco5pk ARM ARMV7 (AM35x SoC) + Stefano Babic <sbabic@denx.de> ea20 davinci @@ -586,6 +582,10 @@ Stefano Babic <sbabic@denx.de> vision2 i.MX51 woodburn i.MX35 +Lukasz Dalek <luk0104@gmail.com> + + h2200 xscale/pxa + Jason Liu <r64343@freescale.com> mx53evk i.MX53 @@ -901,6 +901,10 @@ Michal Simek <monstr@monstr.eu> zynq ARM ARMV7 (Zynq SoC) +Lucas Stach <dev@lynxeye.de> + + colibri_t20_iris Tegra20 (ARM7 & A9 Dual Core) + Nick Thompson <nick.thompson@gefanuc.com> da830evm ARM926EJS (DA830/OMAP-L137) @@ -1010,6 +1014,10 @@ Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> armadillo-800eva R8A7740 (RMOBILE SoC) +Pali Rohár <pali.rohar@gmail.com> + + nokia_rx51 ARM ARMV7 (OMAP34xx SoC) + ------------------------------------------------------------------------- Unknown / orphaned boards: @@ -640,7 +640,7 @@ build_target() { fi if [ $BUILD_MANY == 1 ] ; then - ${MAKE} tidy + ${MAKE} -s tidy if [ -s ${LOG_DIR}/${target}.ERR ] ; then cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target} @@ -21,10 +21,10 @@ # MA 02111-1307 USA # -VERSION = 2012 -PATCHLEVEL = 10 +VERSION = 2013 +PATCHLEVEL = 01 SUBLEVEL = -EXTRAVERSION = +EXTRAVERSION = -rc1 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else @@ -260,7 +260,9 @@ LIBS-y += drivers/net/npe/libnpe.o endif LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o -LIBS-y += fs/cramfs/libcramfs.o \ +LIBS-y += fs/libfs.o \ + fs/cbfs/libcbfs.o \ + fs/cramfs/libcramfs.o \ fs/ext4/libext4fs.o \ fs/fat/libfat.o \ fs/fdos/libfdos.o \ @@ -514,17 +516,18 @@ $(obj)u-boot.spr: $(obj)u-boot.img $(obj)spl/u-boot-spl.bin ifeq ($(SOC),tegra20) ifeq ($(CONFIG_OF_SEPARATE),y) -$(obj)u-boot-dtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(obj)u-boot.dtb - $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin - cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(obj)u-boot.dtb > $@ - rm $(obj)spl/u-boot-spl-pad.bin +nodtb=dtb +dtbfile=$(obj)u-boot.dtb else -$(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin +nodtb=nodtb +dtbfile= +endif + +$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile) $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin - cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@ + cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@ rm $(obj)spl/u-boot-spl-pad.bin endif -endif ifeq ($(CONFIG_SANDBOX),y) GEN_UBOOT = \ @@ -533,9 +536,10 @@ GEN_UBOOT = \ $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot else GEN_UBOOT = \ - UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ - sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ - cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__OBJS) \ + UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ + sed -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\ + cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \ + $$UNDEF_LST $(__OBJS) \ --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ -Map u-boot.map -o u-boot endif @@ -568,8 +572,12 @@ $(SUBDIR_EXAMPLES): $(obj)u-boot $(LDSCRIPT): depend $(MAKE) -C $(dir $@) $(notdir $@) -$(obj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates u-boot.lst, +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS))) +$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@ nand_spl: $(TIMESTAMP_FILE) $(VERSION_FILE) depend $(MAKE) -C nand_spl/board/$(BOARDDIR) all @@ -748,20 +756,6 @@ $(obj).boards.depend: boards.cfg lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/') ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/') -#======================================================================== -# ARM -#======================================================================== - -SX1_stdout_serial_config \ -SX1_config: unconfig - @mkdir -p $(obj)include - @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ - echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ - else \ - echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ - fi; - @$(MKCONFIG) -n $@ SX1 arm arm925t sx1 - ######################################################################### ## ARM1176 Systems ######################################################################### @@ -808,6 +802,7 @@ clean: $(obj)board/matrix_vision/*/bootscript.img \ $(obj)board/voiceblue/eeprom \ $(obj)u-boot.lds \ + $(obj)include/u-boot.lst \ $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \ $(obj)arch/blackfin/cpu/init.{lds,elf} @rm -f $(obj)include/bmp_logo.h @@ -841,8 +836,10 @@ clobber: tidy @rm -f $(obj)u-boot.dtb @rm -f $(obj)u-boot.sb @rm -f $(obj)u-boot.spr - @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map} - @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map} + @rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map} + @rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map} + @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map} + @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst} @rm -f $(obj)MLO @rm -f $(obj)SPL @rm -f $(obj)tools/xway-swap-bytes @@ -363,6 +363,12 @@ The following options need to be configured: ICache only when Code runs from RAM. - 85xx CPU Options: + CONFIG_SYS_PPC64 + + Specifies that the core is a 64-bit PowerPC implementation (implements + the "64" category of the Power ISA). This is necessary for ePAPR + compliance, among other possible reasons. + CONFIG_SYS_FSL_TBCLK_DIV Defines the core time base clock divider ratio compared to the @@ -655,6 +661,10 @@ The following options need to be configured: additional board info beside the logo + When CONFIG_CFB_CONSOLE_ANSI is defined, console will support + a limited number of ANSI escape sequences (cursor control, + erase functions and limited graphics rendition control). + When CONFIG_CFB_CONSOLE is defined, video console is default i/o. Serial console can be forced with environment 'console=serial'. @@ -801,9 +811,11 @@ The following options need to be configured: CONFIG_CMD_EEPROM * EEPROM read/write support CONFIG_CMD_ELF * bootelf, bootvx CONFIG_CMD_EXPORTENV * export the environment + CONFIG_CMD_EXT2 * ext2 command support + CONFIG_CMD_EXT4 * ext4 command support CONFIG_CMD_SAVEENV saveenv CONFIG_CMD_FDC * Floppy Disk Support - CONFIG_CMD_FAT * FAT partition support + CONFIG_CMD_FAT * FAT command support CONFIG_CMD_FDOS * Dos diskette Support CONFIG_CMD_FLASH flinfo, erase, protect CONFIG_CMD_FPGA FPGA device initialization support @@ -1033,6 +1045,9 @@ The following options need to be configured: devices. CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz) + The environment variable 'scsidevs' is set to the number of + SCSI devices found during the last scan. + - NETWORK Support (PCI): CONFIG_E1000 Support for Intel 8254x/8257x gigabit chips. @@ -1084,7 +1099,7 @@ The following options need to be configured: CONFIG_CALXEDA_XGMAC Support for the Calxeda XGMAC device - CONFIG_DRIVER_LAN91C96 + CONFIG_LAN91C96 Support for SMSC's LAN91C96 chips. CONFIG_LAN91C96_BASE @@ -1094,7 +1109,7 @@ The following options need to be configured: CONFIG_LAN91C96_USE_32_BIT Define this to enable 32 bit addressing - CONFIG_DRIVER_SMC91111 + CONFIG_SMC91111 Support for SMSC's LAN91C111 chip CONFIG_SMC91111_BASE @@ -1316,6 +1331,13 @@ The following options need to be configured: This will also enable the command "fatwrite" enabling the user to write files to FAT. +CBFS (Coreboot Filesystem) support + CONFIG_CMD_CBFS + + Define this to enable support for reading from a Coreboot + filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls + and cbfsload. + - Keyboard Support: CONFIG_ISA_KEYBOARD @@ -2169,8 +2191,8 @@ The following options need to be configured: following board configurations are known to be "pRAM-clean": - ETX094, IVMS8, IVML24, SPD8xx, TQM8xxL, - HERMES, IP860, RPXlite, LWMON, LANTEC, + IVMS8, IVML24, SPD8xx, TQM8xxL, + HERMES, IP860, RPXlite, LWMON, FLAGADM, TQM8260 - Error Recovery: @@ -2296,6 +2318,12 @@ The following options need to be configured: - CONFIG_SYS_VENDOR - CONFIG_SYS_SOC + CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + + Define this in order to add variables describing certain + run-time determined information about the hardware to the + environment. These will be named board_name, board_rev. + - DataFlash Support: CONFIG_HAS_DATAFLASH diff --git a/arch/arm/cpu/arm1176/tnetv107x/Makefile b/arch/arm/cpu/arm1176/tnetv107x/Makefile index c63dc925ef..c1d4d678c0 100644 --- a/arch/arm/cpu/arm1176/tnetv107x/Makefile +++ b/arch/arm/cpu/arm1176/tnetv107x/Makefile @@ -21,7 +21,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS += aemif.o clock.o init.o mux.o timer.o wdt.o +COBJS += aemif.o clock.o init.o mux.o timer.o SOBJS += lowlevel_init.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/arch/arm/cpu/arm1176/tnetv107x/clock.c b/arch/arm/cpu/arm1176/tnetv107x/clock.c index e26fec1f95..16876aeea8 100644 --- a/arch/arm/cpu/arm1176/tnetv107x/clock.c +++ b/arch/arm/cpu/arm1176/tnetv107x/clock.c @@ -168,10 +168,6 @@ static unsigned long pll_div_mask[] = { 0x01ff, 0x00ff, 0x00ff }; #define tdm_extra_clk {TDM_PLL, 1} #define tdm1_clk {TDM_PLL, 2} -/* Optimization barrier */ -#define barrier() \ - __asm__ __volatile__("mov r0, r0\n" : : : "memory"); - static const struct lpsc_map lpsc_clk_map[] = { [TNETV107X_LPSC_ARM] = sys_arm1176_clk, [TNETV107X_LPSC_GEM] = sys_dsp_clk, diff --git a/arch/arm/cpu/arm720t/cpu.c b/arch/arm/cpu/arm720t/cpu.c index ce7b3c9c24..820614e0ea 100644 --- a/arch/arm/cpu/arm720t/cpu.c +++ b/arch/arm/cpu/arm720t/cpu.c @@ -27,34 +27,12 @@ */ /* - * CPU specific code + * cleanup_before_linux() - Prepare the CPU to jump to Linux + * + * This function is called just before we call Linux, it + * prepares the processor for linux */ - -#include <common.h> -#include <command.h> -#include <clps7111.h> -#include <asm/hardware.h> -#include <asm/system.h> - -int cleanup_before_linux (void) +int cleanup_before_linux(void) { - /* - * this function is called just before we call linux - * it prepares the processor for linux - * - * we turn off caches etc ... - * and we set the CPU-speed to 73 MHz - see start.S for details - */ - -#if defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B) || defined(CONFIG_LPC2292) - disable_interrupts (); - /* Nothing more needed */ -#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) - /* No cleanup before linux for IntegratorAP/CM720T as yet */ -#elif defined(CONFIG_TEGRA) - /* No cleanup before linux for tegra as yet */ -#else -#error No cleanup_before_linux() defined for this CPU type -#endif return 0; } diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c index c2f898f2cc..623a24b651 100644 --- a/arch/arm/cpu/arm720t/interrupts.c +++ b/arch/arm/cpu/arm720t/interrupts.c @@ -27,266 +27,23 @@ */ #include <common.h> -#include <clps7111.h> -#include <asm/proc-armv/ptrace.h> -#include <asm/hardware.h> - -#ifndef CONFIG_NETARM -/* we always count down the max. */ -#define TIMER_LOAD_VAL 0xffff -/* macro to read the 16 bit timer */ -#define READ_TIMER (IO_TC1D & 0xffff) - -#ifdef CONFIG_LPC2292 -#undef READ_TIMER -#define READ_TIMER (0xFFFFFFFF - GET32(T0TC)) -#endif - -#else -#define IRQEN (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_INTR_ENABLE)) -#define TM2CTRL (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL)) -#define TM2STAT (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_STATUS)) -#define TIMER_LOAD_VAL NETARM_GEN_TSTAT_CTC_MASK -#define READ_TIMER (TM2STAT & NETARM_GEN_TSTAT_CTC_MASK) -#endif - -#ifdef CONFIG_S3C4510B -/* require interrupts for the S3C4510B */ -# ifndef CONFIG_USE_IRQ -# error CONFIG_USE_IRQ _must_ be defined when using CONFIG_S3C4510B -# else -static struct _irq_handler IRQ_HANDLER[N_IRQS]; -# endif -#endif /* CONFIG_S3C4510B */ #ifdef CONFIG_USE_IRQ void do_irq (struct pt_regs *pt_regs) { -#if defined(CONFIG_S3C4510B) - unsigned int pending; - - while ( (pending = GET_REG( REG_INTOFFSET)) != 0x54) { /* sentinal value for no pending interrutps */ - IRQ_HANDLER[pending>>2].m_func( IRQ_HANDLER[pending>>2].m_data); - - /* clear pending interrupt */ - PUT_REG( REG_INTPEND, (1<<(pending>>2))); - } -#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) - /* No do_irq() for IntegratorAP/CM720T as yet */ -#elif defined(CONFIG_LPC2292) - - void (*pfnct)(void); - - pfnct = (void (*)(void))VICVectAddr; - - (*pfnct)(); -#else -#error do_irq() not defined for this CPU type -#endif -} -#endif - -#ifdef CONFIG_S3C4510B -static void default_isr( void *data) { - printf ("default_isr(): called for IRQ %d\n", (int)data); -} - -static void timer_isr( void *data) { - unsigned int *pTime = (unsigned int *)data; - - (*pTime)++; - if ( !(*pTime % (CONFIG_SYS_HZ/4))) { - /* toggle LED 0 */ - PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1); - } - } #endif -#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) - /* Use IntegratorAP routines in board/integratorap.c */ -#else - +#if defined(CONFIG_TEGRA) static ulong timestamp; static ulong lastdec; -#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C4510B) -int arch_interrupt_init (void) -{ - int i; - - /* install default interrupt handlers */ - for ( i = 0; i < N_IRQS; i++) { - IRQ_HANDLER[i].m_data = (void *)i; - IRQ_HANDLER[i].m_func = default_isr; - } - - /* configure interrupts for IRQ mode */ - PUT_REG( REG_INTMODE, 0x0); - /* clear any pending interrupts */ - PUT_REG( REG_INTPEND, 0x1FFFFF); - - lastdec = 0; - - /* install interrupt handler for timer */ - IRQ_HANDLER[INT_TIMER0].m_data = (void *)×tamp; - IRQ_HANDLER[INT_TIMER0].m_func = timer_isr; - - return 0; -} -#endif - int timer_init (void) { -#if defined(CONFIG_NETARM) - /* disable all interrupts */ - IRQEN = 0; - - /* operate timer 2 in non-prescale mode */ - TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CONFIG_SYS_HZ) | - NETARM_GEN_TCTL_ENABLE | - NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL)); - - /* set timer 2 counter */ - lastdec = TIMER_LOAD_VAL; -#elif defined(CONFIG_S3C4510B) - /* configure free running timer 0 */ - PUT_REG( REG_TMOD, 0x0); - /* Stop timer 0 */ - CLR_REG( REG_TMOD, TM0_RUN); - - /* Configure for interval mode */ - CLR_REG( REG_TMOD, TM1_TOGGLE); - - /* - * Load Timer data register with count down value. - * count_down_val = CONFIG_SYS_SYS_CLK_FREQ/CONFIG_SYS_HZ - */ - PUT_REG( REG_TDATA0, (CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ)); - - /* - * Enable global interrupt - * Enable timer0 interrupt - */ - CLR_REG( REG_INTMASK, ((1<<INT_GLOBAL) | (1<<INT_TIMER0))); - - /* Start timer */ - SET_REG( REG_TMOD, TM0_RUN); -#elif defined(CONFIG_LPC2292) - PUT32(T0IR, 0); /* disable all timer0 interrupts */ - PUT32(T0TCR, 0); /* disable timer0 */ - PUT32(T0PR, CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ); - PUT32(T0MCR, 0); - PUT32(T0TC, 0); - PUT32(T0TCR, 1); /* enable timer0 */ - -#elif defined(CONFIG_TEGRA) /* No timer routines for tegra as yet */ lastdec = 0; -#else -#error No timer_init() defined for this CPU type -#endif timestamp = 0; - return (0); -} - -#endif /* ! IntegratorAP */ - -/* - * timer without interrupts - */ - - -#if defined(CONFIG_NETARM) || defined(CONFIG_LPC2292) - -ulong get_timer (ulong base) -{ - return get_timer_masked () - base; -} - -void __udelay (unsigned long usec) -{ - ulong tmo; - - tmo = usec / 1000; - tmo *= CONFIG_SYS_HZ; - tmo /= 1000; - - tmo += get_timer (0); - - while (get_timer_masked () < tmo) -#ifdef CONFIG_LPC2292 - /* GJ - not sure whether this is really needed or a misunderstanding */ - __asm__ __volatile__(" nop"); -#else - /*NOP*/; -#endif -} - -ulong get_timer_masked (void) -{ - ulong now = READ_TIMER; - - if (lastdec >= now) { - /* normal mode */ - timestamp += lastdec - now; - } else { - /* we have an overflow ... */ - timestamp += lastdec + TIMER_LOAD_VAL - now; - } - lastdec = now; - - return timestamp; -} - -void udelay_masked (unsigned long usec) -{ - ulong tmo; - ulong endtime; - signed long diff; - - if (usec >= 1000) { - tmo = usec / 1000; - tmo *= CONFIG_SYS_HZ; - tmo /= 1000; - } else { - tmo = usec * CONFIG_SYS_HZ; - tmo /= (1000*1000); - } - - endtime = get_timer_masked () + tmo; - - do { - ulong now = get_timer_masked (); - diff = endtime - now; - } while (diff >= 0); -} - -#elif defined(CONFIG_S3C4510B) - -ulong get_timer (ulong base) -{ - return timestamp - base; -} - -void __udelay (unsigned long usec) -{ - u32 ticks; - - ticks = (usec * CONFIG_SYS_HZ) / 1000000; - - ticks += get_timer (0); - - while (get_timer (0) < ticks) - /*NOP*/; - + return 0; } - -#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) - /* No timer routines for IntegratorAP/CM720T as yet */ -#elif defined(CONFIG_TEGRA) - /* No timer routines for tegra as yet */ -#else -#error Timer routines not defined for this CPU type #endif diff --git a/arch/arm/cpu/arm720t/lpc2292/Makefile b/arch/arm/cpu/arm720t/lpc2292/Makefile deleted file mode 100644 index 1b93008685..0000000000 --- a/arch/arm/cpu/arm720t/lpc2292/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2000-2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(SOC).o - -COBJS = flash.o mmc.o mmc_hw.o spi.o -SOBJS = $(obj)iap_entry.o - -SRCS := $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) - -all: $(obj).depend $(LIB) - -$(LIB): $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -# this MUST be compiled as thumb code! -$(SOBJS): - $(CC) $(AFLAGS) -march=armv4t -c -o $(SOBJS) iap_entry.S - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/arch/arm/cpu/arm720t/lpc2292/flash.c b/arch/arm/cpu/arm720t/lpc2292/flash.c deleted file mode 100644 index 3d2dc32231..0000000000 --- a/arch/arm/cpu/arm720t/lpc2292/flash.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com> - * - * Modified to remove all but the IAP-command related code by - * Gary Jennejohn <garyj@denx.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/hardware.h> - -/* IAP commands use 32 bytes at the top of CPU internal sram, we - use 512 bytes below that */ -#define COPY_BUFFER_LOCATION 0x40003de0 - -#define IAP_LOCATION 0x7ffffff1 -#define IAP_CMD_PREPARE 50 -#define IAP_CMD_COPY 51 -#define IAP_CMD_ERASE 52 -#define IAP_CMD_CHECK 53 -#define IAP_CMD_ID 54 -#define IAP_CMD_VERSION 55 -#define IAP_CMD_COMPARE 56 - -#define IAP_RET_CMD_SUCCESS 0 - -static unsigned long command[5]; -static unsigned long result[2]; - -extern void iap_entry(unsigned long * command, unsigned long * result); - -/*----------------------------------------------------------------------- - * - */ -static int get_flash_sector(flash_info_t * info, ulong flash_addr) -{ - int i; - - for(i = 1; i < (info->sector_count); i++) { - if (flash_addr < (info->start[i])) - break; - } - - return (i-1); -} - -/*----------------------------------------------------------------------- - * This function assumes that flash_addr is aligned on 512 bytes boundary - * in flash. This function also assumes that prepare have been called - * for the sector in question. - */ -int lpc2292_copy_buffer_to_flash(flash_info_t * info, ulong flash_addr) -{ - int first_sector; - int last_sector; - - first_sector = get_flash_sector(info, flash_addr); - last_sector = get_flash_sector(info, flash_addr + 512 - 1); - - /* prepare sectors for write */ - command[0] = IAP_CMD_PREPARE; - command[1] = first_sector; - command[2] = last_sector; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP prepare failed\n"); - return ERR_PROG_ERROR; - } - - command[0] = IAP_CMD_COPY; - command[1] = flash_addr; - command[2] = COPY_BUFFER_LOCATION; - command[3] = 512; - command[4] = CONFIG_SYS_SYS_CLK_FREQ >> 10; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP copy failed\n"); - return 1; - } - - return 0; -} - -/*----------------------------------------------------------------------- - */ - -int lpc2292_flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag; - int prot; - int sect; - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - - flag = disable_interrupts(); - - printf ("Erasing %d sectors starting at sector %2d.\n" - "This make take some time ... ", - s_last - s_first + 1, s_first); - - command[0] = IAP_CMD_PREPARE; - command[1] = s_first; - command[2] = s_last; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP prepare failed\n"); - return ERR_PROTECTED; - } - - command[0] = IAP_CMD_ERASE; - command[1] = s_first; - command[2] = s_last; - command[3] = CONFIG_SYS_SYS_CLK_FREQ >> 10; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP erase failed\n"); - return ERR_PROTECTED; - } - - if (flag) - enable_interrupts(); - - return ERR_OK; -} - -int lpc2292_write_buff (flash_info_t * info, uchar * src, ulong addr, - ulong cnt) -{ - int first_copy_size; - int last_copy_size; - int first_block; - int last_block; - int nbr_mid_blocks; - uchar memmap_value; - ulong i; - uchar* src_org; - uchar* dst_org; - int ret = ERR_OK; - - src_org = src; - dst_org = (uchar*)addr; - - first_block = addr / 512; - last_block = (addr + cnt) / 512; - nbr_mid_blocks = last_block - first_block - 1; - - first_copy_size = 512 - (addr % 512); - last_copy_size = (addr + cnt) % 512; - - debug("\ncopy first block: (1) %lX -> %lX 0x200 bytes, " - "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n", - (ulong)(first_block * 512), - (ulong)COPY_BUFFER_LOCATION, - (ulong)src, - (ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size), - first_copy_size, - (ulong)COPY_BUFFER_LOCATION, - (ulong)(first_block * 512)); - - /* copy first block */ - memcpy((void*)COPY_BUFFER_LOCATION, - (void*)(first_block * 512), 512); - memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size), - src, first_copy_size); - lpc2292_copy_buffer_to_flash(info, first_block * 512); - src += first_copy_size; - addr += first_copy_size; - - /* copy middle blocks */ - for (i = 0; i < nbr_mid_blocks; i++) { - debug("copy middle block: %lX -> %lX 512 bytes, " - "%lX -> %lX 512 bytes\n", - (ulong)src, - (ulong)COPY_BUFFER_LOCATION, - (ulong)COPY_BUFFER_LOCATION, - (ulong)addr); - - memcpy((void*)COPY_BUFFER_LOCATION, src, 512); - lpc2292_copy_buffer_to_flash(info, addr); - src += 512; - addr += 512; - } - - - if (last_copy_size > 0) { - debug("copy last block: (1) %lX -> %lX 0x200 bytes, " - "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n", - (ulong)(last_block * 512), - (ulong)COPY_BUFFER_LOCATION, - (ulong)src, - (ulong)(COPY_BUFFER_LOCATION), - last_copy_size, - (ulong)COPY_BUFFER_LOCATION, - (ulong)addr); - - /* copy last block */ - memcpy((void*)COPY_BUFFER_LOCATION, - (void*)(last_block * 512), 512); - memcpy((void*)COPY_BUFFER_LOCATION, - src, last_copy_size); - lpc2292_copy_buffer_to_flash(info, addr); - } - - /* verify write */ - memmap_value = GET8(MEMMAP); - - disable_interrupts(); - - PUT8(MEMMAP, 01); /* we must make sure that initial 64 - bytes are taken from flash when we - do the compare */ - - for (i = 0; i < cnt; i++) { - if (*dst_org != *src_org){ - printf("Write failed. Byte %lX differs\n", i); - ret = ERR_PROG_ERROR; - break; - } - dst_org++; - src_org++; - } - - PUT8(MEMMAP, memmap_value); - enable_interrupts(); - - return ret; -} diff --git a/arch/arm/cpu/arm720t/lpc2292/iap_entry.S b/arch/arm/cpu/arm720t/lpc2292/iap_entry.S deleted file mode 100644 index c31d5190bd..0000000000 --- a/arch/arm/cpu/arm720t/lpc2292/iap_entry.S +++ /dev/null @@ -1,7 +0,0 @@ -IAP_ADDRESS: .word 0x7FFFFFF1 - -.globl iap_entry -iap_entry: - ldr r2, IAP_ADDRESS - bx r2 - mov pc, lr diff --git a/arch/arm/cpu/arm720t/lpc2292/mmc.c b/arch/arm/cpu/arm720t/lpc2292/mmc.c deleted file mode 100644 index beaffe944c..0000000000 --- a/arch/arm/cpu/arm720t/lpc2292/mmc.c +++ /dev/null @@ -1,131 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <mmc.h> -#include <asm/errno.h> -#include <asm/arch/hardware.h> -#include <part.h> -#include <fat.h> -#include "mmc_hw.h" -#include <asm/arch/spi.h> - -#ifdef CONFIG_MMC - -#undef MMC_DEBUG - -static block_dev_desc_t mmc_dev; - -/* these are filled out by a call to mmc_hw_get_parameters */ -static int hw_size; /* in kbytes */ -static int hw_nr_sects; -static int hw_sect_size; /* in bytes */ - -block_dev_desc_t * mmc_get_dev(int dev) -{ - return (block_dev_desc_t *)(&mmc_dev); -} - -unsigned long mmc_block_read(int dev, - unsigned long start, - lbaint_t blkcnt, - void *buffer) -{ - unsigned long rc = 0; - unsigned char *p = (unsigned char *)buffer; - unsigned long i; - unsigned long addr = start; - -#ifdef MMC_DEBUG - printf("mmc_block_read: start=%lu, blkcnt=%lu\n", start, - (unsigned long)blkcnt); -#endif - - for(i = 0; i < (unsigned long)blkcnt; i++) { -#ifdef MMC_DEBUG - printf("mmc_read_sector: addr=%lu, buffer=%p\n", addr, p); -#endif - (void)mmc_read_sector(addr, p); - rc++; - addr++; - p += hw_sect_size; - } - - return rc; -} - -/*----------------------------------------------------------------------------- - * Read hardware paramterers (sector size, size, number of sectors) - */ -static int mmc_hw_get_parameters(void) -{ - unsigned char csddata[16]; - unsigned int sizemult; - unsigned int size; - - mmc_read_csd(csddata); - hw_sect_size = 1<<(csddata[5] & 0x0f); - size = ((csddata[6]&0x03)<<10)+(csddata[7]<<2)+(csddata[8]&0xc0); - sizemult = ((csddata[10] & 0x80)>>7)+((csddata[9] & 0x03)<<1); - hw_nr_sects = (size+1)*(1<<(sizemult+2)); - hw_size = hw_nr_sects*hw_sect_size/1024; - -#ifdef MMC_DEBUG - printf("mmc_hw_get_parameters: hw_sect_size=%d, hw_nr_sects=%d, " - "hw_size=%d\n", hw_sect_size, hw_nr_sects, hw_size); -#endif - - return 0; -} - -int mmc_legacy_init(int verbose) -{ - int ret = -ENODEV; - - if (verbose) - printf("mmc_legacy_init\n"); - - spi_init(); - /* this meeds to be done twice */ - mmc_hw_init(); - udelay(1000); - mmc_hw_init(); - - mmc_hw_get_parameters(); - - mmc_dev.if_type = IF_TYPE_MMC; - mmc_dev.part_type = PART_TYPE_DOS; - mmc_dev.dev = 0; - mmc_dev.lun = 0; - mmc_dev.type = 0; - mmc_dev.blksz = hw_sect_size; - mmc_dev.lba = hw_nr_sects; - sprintf((char*)mmc_dev.vendor, "Unknown vendor"); - sprintf((char*)mmc_dev.product, "Unknown product"); - sprintf((char*)mmc_dev.revision, "N/A"); - mmc_dev.removable = 0; /* should be true??? */ - mmc_dev.block_read = mmc_block_read; - - fat_register_device(&mmc_dev, 1); - - ret = 0; - - return ret; -} - -#endif /* CONFIG_MMC */ diff --git a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c b/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c deleted file mode 100644 index bd6a5b1206..0000000000 --- a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - This code was original written by Ulrich Radig and modified by - Embedded Artists AB (www.embeddedartists.com). - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <config.h> -#include <common.h> -#include <asm/arch/hardware.h> -#include <asm/arch/spi.h> - -#define MMC_Enable() PUT32(IO1CLR, 1l << 22) -#define MMC_Disable() PUT32(IO1SET, 1l << 22) -#define mmc_spi_cfg() spi_set_clock(8); spi_set_cfg(0, 1, 0); - -static unsigned char Write_Command_MMC (unsigned char *CMD); -static void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, - unsigned short int Bytes); - -/* initialize the hardware */ -int mmc_hw_init(void) -{ - unsigned long a; - unsigned short int Timeout = 0; - unsigned char b; - unsigned char CMD[] = {0x40, 0x00, 0x00, 0x00, 0x00, 0x95}; - - /* set-up GPIO and SPI */ - (*((volatile unsigned long *)PINSEL2)) &= ~(1l << 3); /* clear bit 3 */ - (*((volatile unsigned long *)IO1DIR)) |= (1l << 22); /* set bit 22 (output) */ - - MMC_Disable(); - - spi_lock(); - spi_set_clock(248); - spi_set_cfg(0, 1, 0); - MMC_Enable(); - - /* waste some time */ - for(a=0; a < 20000; a++) - asm("nop"); - - /* Put the MMC/SD-card into SPI-mode */ - for (b = 0; b < 10; b++) /* Sends min 74+ clocks to the MMC/SD-card */ - spi_write(0xff); - - /* Sends command CMD0 to MMC/SD-card */ - while (Write_Command_MMC(CMD) != 1) { - if (Timeout++ > 200) { - MMC_Disable(); - spi_unlock(); - return(1); /* Abort with command 1 (return 1) */ - } - } - /* Sends Command CMD1 an MMC/SD-card */ - Timeout = 0; - CMD[0] = 0x41;/* Command 1 */ - CMD[5] = 0xFF; - - while (Write_Command_MMC(CMD) != 0) { - if (Timeout++ > 200) { - MMC_Disable(); - spi_unlock(); - return (2); /* Abort with command 2 (return 2) */ - } - } - - MMC_Disable(); - spi_unlock(); - - return 0; -} - -/* ############################################################################ - Sends a command to the MMC/SD-card - ######################################################################### */ -static unsigned char Write_Command_MMC (unsigned char *CMD) -{ - unsigned char a, tmp = 0xff; - unsigned short int Timeout = 0; - - MMC_Disable(); - spi_write(0xFF); - MMC_Enable(); - - for (a = 0; a < 0x06; a++) - spi_write(*CMD++); - - while (tmp == 0xff) { - tmp = spi_read(); - if (Timeout++ > 5000) - break; - } - - return (tmp); -} - -/* ############################################################################ - Routine to read the CID register from the MMC/SD-card (16 bytes) - ######################################################################### */ -void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, unsigned short - int Bytes) -{ - unsigned short int a; - - spi_lock(); - mmc_spi_cfg(); - MMC_Enable(); - - if (Write_Command_MMC(CMD) != 0) { - MMC_Disable(); - spi_unlock(); - return; - } - - while (spi_read() != 0xfe) {}; - for (a = 0; a < Bytes; a++) - *Buffer++ = spi_read(); - - /* Read the CRC-byte */ - spi_read(); /* CRC - byte is discarded */ - spi_read(); /* CRC - byte is discarded */ - /* set MMC_Chip_Select to high (MMC/SD-card Inaktiv) */ - MMC_Disable(); - spi_unlock(); - - return; -} - -/* ############################################################################ - Routine to read a block (512 bytes) from the MMC/SD-card - ######################################################################### */ -unsigned char mmc_read_sector (unsigned long addr,unsigned char *Buffer) -{ - /* Command 16 to read aBlocks from the MMC/SD - caed */ - unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF}; - - /* The address on the MMC/SD-card is in bytes, - addr is transformed from blocks to bytes and the result is - placed into the command */ - - addr = addr << 9; /* addr = addr * 512 */ - - CMD[1] = ((addr & 0xFF000000) >> 24); - CMD[2] = ((addr & 0x00FF0000) >> 16); - CMD[3] = ((addr & 0x0000FF00) >> 8 ); - - MMC_Read_Block(CMD, Buffer, 512); - - return (0); -} - -/* ############################################################################ - Routine to write a block (512 byte) to the MMC/SD-card - ######################################################################### */ -unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer) -{ - unsigned char tmp, a; - unsigned short int b; - /* Command 24 to write a block to the MMC/SD - card */ - unsigned char CMD[] = {0x58, 0x00, 0x00, 0x00, 0x00, 0xFF}; - - /* The address on the MMC/SD-card is in bytes, - addr is transformed from blocks to bytes and the result is - placed into the command */ - - addr = addr << 9; /* addr = addr * 512 */ - - CMD[1] = ((addr & 0xFF000000) >> 24); - CMD[2] = ((addr & 0x00FF0000) >> 16); - CMD[3] = ((addr & 0x0000FF00) >> 8 ); - - spi_lock(); - mmc_spi_cfg(); - MMC_Enable(); - - /* Send command CMD24 to the MMC/SD-card (Write 1 Block/512 Bytes) */ - tmp = Write_Command_MMC(CMD); - if (tmp != 0) { - MMC_Disable(); - spi_unlock(); - return(tmp); - } - - /* Do a short delay and send a clock-pulse to the MMC/SD-card */ - for (a = 0; a < 100; a++) - spi_read(); - - /* Send a start byte to the MMC/SD-card */ - spi_write(0xFE); - - /* Write the block (512 bytes) to the MMC/SD-card */ - for (b = 0; b < 512; b++) - spi_write(*Buffer++); - - /* write the CRC-Byte */ - spi_write(0xFF); /* write a dummy CRC */ - spi_write(0xFF); /* CRC code is not used */ - - /* Wait for MMC/SD-card busy */ - while (spi_read() != 0xff) {}; - - /* set MMC_Chip_Select to high (MMC/SD-card inactive) */ - MMC_Disable(); - spi_unlock(); - return (0); -} - -/* ######################################################################### - Routine to read the CSD register from the MMC/SD-card (16 bytes) - ######################################################################### */ -unsigned char mmc_read_csd (unsigned char *Buffer) -{ - /* Command to read the CSD register */ - unsigned char CMD[] = {0x49, 0x00, 0x00, 0x00, 0x00, 0xFF}; - - MMC_Read_Block(CMD, Buffer, 16); - - return (0); -} diff --git a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.h b/arch/arm/cpu/arm720t/lpc2292/mmc_hw.h deleted file mode 100644 index 3687dbf696..0000000000 --- a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - This module implements a linux character device driver for the 24c256 chip. - Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef _MMC_HW_ -#define _MMC_HW_ - -unsigned char mmc_read_csd(unsigned char *Buffer); -unsigned char mmc_read_sector (unsigned long addr, - unsigned char *Buffer); -unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer); -int mmc_hw_init(void); - -#endif /* _MMC_HW_ */ diff --git a/arch/arm/cpu/arm720t/lpc2292/spi.c b/arch/arm/cpu/arm720t/lpc2292/spi.c deleted file mode 100644 index d296bdac68..0000000000 --- a/arch/arm/cpu/arm720t/lpc2292/spi.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - This module implements an interface to the SPI on the lpc22xx. - Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <config.h> -#include <common.h> -#include <asm/errno.h> -#include <asm/arch/hardware.h> -#include <asm/arch/spi.h> - -unsigned long spi_flags; -unsigned char spi_idle = 0x00; - -int spi_init(void) -{ - unsigned long pinsel0_value; - - /* activate spi pins */ - pinsel0_value = GET32(PINSEL0); - pinsel0_value &= ~(0xFFl << 8); - pinsel0_value |= (0x55l << 8); - PUT32(PINSEL0, pinsel0_value); - - return 0; -} diff --git a/arch/arm/cpu/arm720t/s3c4510b/Makefile b/arch/arm/cpu/arm720t/s3c4510b/Makefile deleted file mode 100644 index 5c6df08b1a..0000000000 --- a/arch/arm/cpu/arm720t/s3c4510b/Makefile +++ /dev/null @@ -1,45 +0,0 @@ -# -# (C) Copyright 2000-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(SOC).o - -COBJS-y += cache.o - -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) - -all: $(obj).depend $(LIB) - -$(LIB): $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/arch/arm/cpu/arm720t/s3c4510b/cache.c b/arch/arm/cpu/arm720t/s3c4510b/cache.c deleted file mode 100644 index 104d287b26..0000000000 --- a/arch/arm/cpu/arm720t/s3c4510b/cache.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/hardware.h> - -void icache_enable (void) -{ - s32 i; - - /* disable all cache bits */ - CLR_REG( REG_SYSCFG, 0x3F); - - /* 8KB cache, write enable */ - SET_REG( REG_SYSCFG, CACHE_WRITE_BUFF | CACHE_MODE_01); - - /* clear TAG RAM bits */ - for ( i = 0; i < 256; i++) - PUT_REG( CACHE_TAG_RAM + 4*i, 0x00000000); - - /* clear SET0 RAM */ - for(i=0; i < 1024; i++) - PUT_REG( CACHE_SET0_RAM + 4*i, 0x00000000); - - /* clear SET1 RAM */ - for(i=0; i < 1024; i++) - PUT_REG( CACHE_SET1_RAM + 4*i, 0x00000000); - - /* enable cache */ - SET_REG( REG_SYSCFG, CACHE_ENABLE); - -} - -void icache_disable (void) -{ - /* disable all cache bits */ - CLR_REG( REG_SYSCFG, 0x3F); -} - -int icache_status (void) -{ - return GET_REG( REG_SYSCFG) & CACHE_ENABLE; -} - -void dcache_enable (void) -{ - /* we don't have seperate instruction/data caches */ - icache_enable(); -} - -void dcache_disable (void) -{ - /* we don't have seperate instruction/data caches */ - icache_disable(); -} - -int dcache_status (void) -{ - /* we don't have seperate instruction/data caches */ - return icache_status(); -} diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 2f914e9b4e..c2a7763fff 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -43,11 +43,7 @@ _start: b reset ldr pc, _software_interrupt ldr pc, _prefetch_abort ldr pc, _data_abort -#ifdef CONFIG_LPC2292 - .word 0xB4405F76 /* 2's complement of the checksum of the vectors */ -#else ldr pc, _not_used -#endif ldr pc, _irq ldr pc, _fiq @@ -151,10 +147,6 @@ reset: bl cpu_init_crit #endif -#ifdef CONFIG_LPC2292 - bl lowlevel_init -#endif - /* Set stackpointer in internal RAM to call board_init_f */ call_board_init_f: ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) @@ -291,148 +283,9 @@ _dynsym_start_ofs: ************************************************************************* */ -#if defined(CONFIG_LPC2292) -PLLCFG_ADR: .word PLLCFG -PLLFEED_ADR: .word PLLFEED -PLLCON_ADR: .word PLLCON -PLLSTAT_ADR: .word PLLSTAT -VPBDIV_ADR: .word VPBDIV -MEMMAP_ADR: .word MEMMAP - -#endif - cpu_init_crit: -#if defined(CONFIG_NETARM) - /* - * prior to software reset : need to set pin PORTC4 to be *HRESET - */ - ldr r0, =NETARM_GEN_MODULE_BASE - ldr r1, =(NETARM_GEN_PORT_MODE(0x10) | \ - NETARM_GEN_PORT_DIR(0x10)) - str r1, [r0, #+NETARM_GEN_PORTC] - /* - * software reset : see HW Ref. Guide 8.2.4 : Software Service register - * for an explanation of this process - */ - ldr r0, =NETARM_GEN_MODULE_BASE - ldr r1, =NETARM_GEN_SW_SVC_RESETA - str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE] - ldr r1, =NETARM_GEN_SW_SVC_RESETB - str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE] - ldr r1, =NETARM_GEN_SW_SVC_RESETA - str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE] - ldr r1, =NETARM_GEN_SW_SVC_RESETB - str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE] - /* - * setup PLL and System Config - */ - ldr r0, =NETARM_GEN_MODULE_BASE - - ldr r1, =( NETARM_GEN_SYS_CFG_LENDIAN | \ - NETARM_GEN_SYS_CFG_BUSFULL | \ - NETARM_GEN_SYS_CFG_USER_EN | \ - NETARM_GEN_SYS_CFG_ALIGN_ABORT | \ - NETARM_GEN_SYS_CFG_BUSARB_INT | \ - NETARM_GEN_SYS_CFG_BUSMON_EN ) - - str r1, [r0, #+NETARM_GEN_SYSTEM_CONTROL] - -#ifndef CONFIG_NETARM_PLL_BYPASS - ldr r1, =( NETARM_GEN_PLL_CTL_PLLCNT(NETARM_PLL_COUNT_VAL) | \ - NETARM_GEN_PLL_CTL_POLTST_DEF | \ - NETARM_GEN_PLL_CTL_INDIV(1) | \ - NETARM_GEN_PLL_CTL_ICP_DEF | \ - NETARM_GEN_PLL_CTL_OUTDIV(2) ) - str r1, [r0, #+NETARM_GEN_PLL_CONTROL] -#endif - - /* - * mask all IRQs by clearing all bits in the INTMRs - */ - mov r1, #0 - ldr r0, =NETARM_GEN_MODULE_BASE - str r1, [r0, #+NETARM_GEN_INTR_ENABLE] - -#elif defined(CONFIG_S3C4510B) - /* - * Mask off all IRQ sources - */ - ldr r1, =REG_INTMASK - ldr r0, =0x3FFFFF - str r0, [r1] - - /* - * Disable Cache - */ - ldr r0, =REG_SYSCFG - ldr r1, =0x83ffffa0 /* cache-disabled */ - str r1, [r0] - -#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) - /* No specific initialisation for IntegratorAP/CM720T as yet */ -#elif defined(CONFIG_LPC2292) - /* Set-up PLL */ - mov r3, #0xAA - mov r4, #0x55 - /* First disconnect and disable the PLL */ - ldr r0, PLLCON_ADR - mov r1, #0x00 - str r1, [r0] - ldr r0, PLLFEED_ADR /* start feed sequence */ - str r3, [r0] - str r4, [r0] /* feed sequence done */ - /* Set new M and P values */ - ldr r0, PLLCFG_ADR - mov r1, #0x23 /* M=4 and P=2 */ - str r1, [r0] - ldr r0, PLLFEED_ADR /* start feed sequence */ - str r3, [r0] - str r4, [r0] /* feed sequence done */ - /* Then enable the PLL */ - ldr r0, PLLCON_ADR - mov r1, #0x01 /* PLL enable bit */ - str r1, [r0] - ldr r0, PLLFEED_ADR /* start feed sequence */ - str r3, [r0] - str r4, [r0] /* feed sequence done */ - /* Wait for the lock */ - ldr r0, PLLSTAT_ADR - mov r1, #0x400 /* lock bit */ -lock_loop: - ldr r2, [r0] - and r2, r1, r2 - cmp r2, #0 - beq lock_loop - /* And finally connect the PLL */ - ldr r0, PLLCON_ADR - mov r1, #0x03 /* PLL enable bit and connect bit */ - str r1, [r0] - ldr r0, PLLFEED_ADR /* start feed sequence */ - str r3, [r0] - str r4, [r0] /* feed sequence done */ - /* Set-up VPBDIV register */ - ldr r0, VPBDIV_ADR - mov r1, #0x01 /* VPB clock is same as process clock */ - str r1, [r0] -#elif defined(CONFIG_TEGRA) - /* No cpu_init_crit for tegra as yet */ -#else -#error No cpu_init_crit() defined for current CPU type -#endif - -#ifdef CONFIG_ARM7_REVD - /* set clock speed */ - /* !!! we run @ 36 MHz due to a hardware flaw in Rev. D processors */ - /* !!! not doing DRAM refresh properly! */ - ldr r0, SYSCON3 - ldr r1, [r0] - bic r1, r1, #CLKCTL - orr r1, r1, #CLKCTL_36 - str r1, [r0] -#endif - -#if !defined(CONFIG_LPC2292) && !defined(CONFIG_TEGRA) +#if !defined(CONFIG_TEGRA) mov ip, lr /* * before relocating, we have to setup RAM timing @@ -610,39 +463,3 @@ fiq: #endif #endif /* CONFIG_SPL_BUILD */ - -#if defined(CONFIG_NETARM) - .align 5 -.globl reset_cpu -reset_cpu: - ldr r1, =NETARM_MEM_MODULE_BASE - ldr r0, [r1, #+NETARM_MEM_CS0_BASE_ADDR] - ldr r1, =0xFFFFF000 - and r0, r1, r0 - ldr r1, =(relocate-CONFIG_SYS_TEXT_BASE) - add r0, r1, r0 - ldr r4, =NETARM_GEN_MODULE_BASE - ldr r1, =NETARM_GEN_SW_SVC_RESETA - str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE] - ldr r1, =NETARM_GEN_SW_SVC_RESETB - str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE] - ldr r1, =NETARM_GEN_SW_SVC_RESETA - str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE] - ldr r1, =NETARM_GEN_SW_SVC_RESETB - str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE] - mov pc, r0 -#elif defined(CONFIG_S3C4510B) -/* Nothing done here as reseting the CPU is board specific, depending - * on external peripherals such as watchdog timers, etc. */ -#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) - /* No specific reset actions for IntegratorAP/CM720T as yet */ -#elif defined(CONFIG_LPC2292) - .align 5 -.globl reset_cpu -reset_cpu: - mov pc, r0 -#elif defined(CONFIG_TEGRA) - /* No specific reset actions for tegra as yet */ -#else -#error No reset_cpu() defined for current CPU type -#endif diff --git a/arch/arm/cpu/arm720t/tegra-common/spl.c b/arch/arm/cpu/arm720t/tegra-common/spl.c index 0d37ce83c8..c280ab7d0f 100644 --- a/arch/arm/cpu/arm720t/tegra-common/spl.c +++ b/arch/arm/cpu/arm720t/tegra-common/spl.c @@ -23,105 +23,42 @@ * MA 02111-1307 USA */ #include <common.h> -#include <asm/u-boot.h> -#include <asm/utils.h> -#include <nand.h> -#include <mmc.h> -#include <fat.h> -#include <version.h> -#include <i2c.h> -#include <image.h> -#include <malloc.h> -#include <linux/compiler.h> #include "cpu.h" +#include <spl.h> #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/pinmux.h> #include <asm/arch/tegra.h> #include <asm/arch-tegra/board.h> -#include <asm/arch-tegra/clk_rst.h> -#include <asm/arch-tegra/pmc.h> -#include <asm/arch-tegra/scu.h> -#include <asm/arch-tegra/sys_proto.h> +#include <asm/arch/spl.h> -DECLARE_GLOBAL_DATA_PTR; -/* Define global data structure pointer to it*/ -static gd_t gdata __attribute__ ((section(".data"))); -static bd_t bdata __attribute__ ((section(".data"))); - -inline void hang(void) +void spl_board_init(void) { - puts("### ERROR ### Please RESET the board ###\n"); - for (;;) - ; -} + struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + + /* enable JTAG */ + writel(0xC0, &pmt->pmt_cfg_ctl); -void board_init_f(ulong dummy) -{ board_init_uart_f(); /* Initialize periph GPIOs */ gpio_early_init_uart(); - /* - * We call relocate_code() with relocation target same as the - * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting - * skipped. Instead, only .bss initialization will happen. That's - * all we need - */ - debug(">>board_init_f()\n"); - relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE); + clock_early_init(); + preloader_console_init(); } -/* This requires UART clocks to be enabled */ -static void preloader_console_init(void) +u32 spl_boot_device(void) { - const char *u_boot_rev = U_BOOT_VERSION; - - gd = &gdata; - gd->bd = &bdata; - gd->flags |= GD_FLG_RELOC; - gd->baudrate = CONFIG_BAUDRATE; - - serial_init(); /* serial communications setup */ - - gd->have_console = 1; - - /* Avoid a second "U-Boot" coming from this string */ - u_boot_rev = &u_boot_rev[7]; - - printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE, - U_BOOT_TIME); + return BOOT_DEVICE_RAM; } -void board_init_r(gd_t *id, ulong dummy) +void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { - struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; - - /* enable JTAG */ - writel(0xC0, &pmt->pmt_cfg_ctl); - - debug(">>spl:board_init_r()\n"); - - mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START, - CONFIG_SYS_SPL_MALLOC_SIZE); - -#ifdef CONFIG_SPL_BOARD_INIT - spl_board_init(); -#endif + debug("image entry point: 0x%X\n", spl_image->entry_point); - clock_early_init(); - serial_init(); - preloader_console_init(); - - start_cpu((u32)CONFIG_SYS_TEXT_BASE); + start_cpu((u32)spl_image->entry_point); halt_avp(); - /* not reached */ -} - -int board_usb_init(const void *blob) -{ - return 0; } diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds index dc6ba34082..008ae891ca 100644 --- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds +++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds @@ -48,9 +48,11 @@ SECTIONS .got : { *(.got) } . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = ALIGN(4); __bss_start = .; diff --git a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S index e9f1227dd6..1bba571077 100644 --- a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S +++ b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S @@ -72,10 +72,10 @@ lowlevel_init: * enable UART for early debug trace */ ldr r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR) - mov r2, #0xd9 - str r2, [r1] /* 115200 baud */ + mov r2, #((25000000+CONFIG_BAUDRATE/2) / CONFIG_BAUDRATE) + str r2, [r1] ldr r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL) - mov r2, #0x03 + mov r2, #KS8695_UART_LINEC_WLEN8 str r2, [r1] /* 8 data bits, no parity, 1 stop */ ldr r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING) mov r2, #0x41 diff --git a/arch/arm/cpu/arm920t/s3c24x0/Makefile b/arch/arm/cpu/arm920t/s3c24x0/Makefile index 0029700e44..808ab8f0f2 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/Makefile +++ b/arch/arm/cpu/arm920t/s3c24x0/Makefile @@ -29,9 +29,6 @@ COBJS-$(CONFIG_USE_IRQ) += interrupts.o COBJS-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o COBJS-y += speed.o COBJS-y += timer.o -COBJS-y += usb.o -COBJS-y += usb_ohci.o - SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb.c b/arch/arm/cpu/arm920t/s3c24x0/usb.c deleted file mode 100644 index 226a3f6c90..0000000000 --- a/arch/arm/cpu/arm920t/s3c24x0/usb.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * (C) Copyright 2006 - * DENX Software Engineering <mk@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -#if defined(CONFIG_USB_OHCI_NEW) && \ - defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \ - defined(CONFIG_S3C24X0) - -#include <asm/arch/s3c24x0_cpu.h> -#include <asm/io.h> - -int usb_cpu_init(void) -{ - struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); - struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); - - /* - * Set the 48 MHz UPLL clocking. Values are taken from - * "PLL value selection guide", 6-23, s3c2400_UM.pdf. - */ - writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon); - /* 1 = use pads related USB for USB host */ - writel(readl(&gpio->misccr) | 0x8, &gpio->misccr); - - /* - * Enable USB host clock. - */ - writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon); - - return 0; -} - -int usb_cpu_stop(void) -{ - struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); - /* may not want to do this */ - writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon); - return 0; -} - -int usb_cpu_init_fail(void) -{ - struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); - writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon); - return 0; -} - -#endif /* defined(CONFIG_USB_OHCI_NEW) && \ - defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \ - defined(CONFIG_S3C24X0) */ diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c index 6d77219d0d..93485523b5 100644 --- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c @@ -118,6 +118,21 @@ void at91_serial2_hw_init(void) writel(1 << ATMEL_ID_USART2, &pmc->pcer); } +void at91_mci_hw_init(void) +{ + /* Initialize the MCI0 */ + at91_set_a_periph(AT91_PIO_PORTA, 17, 1); /* MCCK */ + at91_set_a_periph(AT91_PIO_PORTA, 16, 1); /* MCCDA */ + at91_set_a_periph(AT91_PIO_PORTA, 15, 1); /* MCDA0 */ + at91_set_a_periph(AT91_PIO_PORTA, 18, 1); /* MCDA1 */ + at91_set_a_periph(AT91_PIO_PORTA, 19, 1); /* MCDA2 */ + at91_set_a_periph(AT91_PIO_PORTA, 20, 1); /* MCDA3 */ + + /* Enable clock for MCI0 */ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer); +} + #ifdef CONFIG_ATMEL_SPI void at91_spi0_hw_init(unsigned long cs_mask) { diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds index f8ea38c03d..6dc681a313 100644 --- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds @@ -50,9 +50,10 @@ SECTIONS } . = ALIGN(4); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + .u_boot_list : { + #include <u-boot.lst> + } . = ALIGN(4); diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds index afd3381e16..f3bd5e7367 100644 --- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds +++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds @@ -50,9 +50,10 @@ SECTIONS } . = ALIGN(4); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + .u_boot_list : { + #include <u-boot.lst> + } . = ALIGN(4); diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index 7768912603..74875b3255 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -21,6 +21,7 @@ COBJS += sys_info.o COBJS += ddr.o COBJS += emif4.o COBJS += board.o +COBJS += mux.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index 978b184fb2..e4c123cd21 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -36,9 +36,6 @@ DECLARE_GLOBAL_DATA_PTR; -struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; -struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; - static const struct gpio_bank gpio_bank_am33xx[4] = { { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, @@ -48,153 +45,11 @@ static const struct gpio_bank gpio_bank_am33xx[4] = { const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; -/* MII mode defines */ -#define MII_MODE_ENABLE 0x0 -#define RGMII_MODE_ENABLE 0xA - -/* GPIO that controls power to DDR on EVM-SK */ -#define GPIO_DDR_VTT_EN 7 - -static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - -static struct am335x_baseboard_id __attribute__((section (".data"))) header; - -static inline int board_is_bone(void) -{ - return !strncmp(header.name, "A335BONE", HDR_NAME_LEN); -} - -static inline int board_is_evm_sk(void) -{ - return !strncmp("A335X_SK", header.name, HDR_NAME_LEN); -} - -/* - * Read header information from EEPROM into global structure. - */ -static int read_eeprom(void) -{ - /* Check if baseboard eeprom is available */ - if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { - puts("Could not probe the EEPROM; something fundamentally " - "wrong on the I2C bus.\n"); - return -ENODEV; - } - - /* read the eeprom using i2c */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header, - sizeof(header))) { - puts("Could not read the EEPROM; something fundamentally" - " wrong on the I2C bus.\n"); - return -EIO; - } - - if (header.magic != 0xEE3355AA) { - /* - * read the eeprom using i2c again, - * but use only a 1 byte address - */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, - (uchar *)&header, sizeof(header))) { - puts("Could not read the EEPROM; something " - "fundamentally wrong on the I2C bus.\n"); - return -EIO; - } - - if (header.magic != 0xEE3355AA) { - printf("Incorrect magic number (0x%x) in EEPROM\n", - header.magic); - return -EINVAL; - } - } - - return 0; -} - -/* UART Defines */ -#ifdef CONFIG_SPL_BUILD -#define UART_RESET (0x1 << 1) -#define UART_CLK_RUNNING_MASK 0x1 -#define UART_SMART_IDLE_EN (0x1 << 0x3) -#endif - -/* - * Determine what type of DDR we have. - */ -static short inline board_memory_type(void) -{ - /* The following boards are known to use DDR3. */ - if (board_is_evm_sk()) - return EMIF_REG_SDRAM_TYPE_DDR3; - - return EMIF_REG_SDRAM_TYPE_DDR2; -} - -/* - * early system init of muxing and clocks. - */ -void s_init(void) -{ - /* WDT1 is already running when the bootloader gets control - * Disable it to avoid "random" resets - */ - writel(0xAAAA, &wdtimer->wdtwspr); - while (readl(&wdtimer->wdtwwps) != 0x0) - ; - writel(0x5555, &wdtimer->wdtwspr); - while (readl(&wdtimer->wdtwwps) != 0x0) - ; - -#ifdef CONFIG_SPL_BUILD - /* Setup the PLLs and the clocks for the peripherals */ - pll_init(); - - /* UART softreset */ - u32 regVal; - - enable_uart0_pin_mux(); - - regVal = readl(&uart_base->uartsyscfg); - regVal |= UART_RESET; - writel(regVal, &uart_base->uartsyscfg); - while ((readl(&uart_base->uartsyssts) & - UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK) - ; - - /* Disable smart idle */ - regVal = readl(&uart_base->uartsyscfg); - regVal |= UART_SMART_IDLE_EN; - writel(regVal, &uart_base->uartsyscfg); - - gd = &gdata; - - preloader_console_init(); - - /* Initalize the board header */ - enable_i2c0_pin_mux(); - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - if (read_eeprom() < 0) - puts("Could not get board ID.\n"); - - enable_board_pin_mux(&header); - if (board_is_evm_sk()) { - /* - * EVM SK 1.2A and later use gpio0_7 to enable DDR3. - * This is safe enough to do on older revs. - */ - gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en"); - gpio_direction_output(GPIO_DDR_VTT_EN, 1); - } - - config_ddr(board_memory_type()); -#endif -} - #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) -int board_mmc_init(bd_t *bis) +int cpu_mmc_init(bd_t *bis) { int ret; - + ret = omap_mmc_init(0, 0, 0); if (ret) return ret; @@ -208,93 +63,3 @@ void setup_clocks_for_console(void) /* Not yet implemented */ return; } - -/* - * Basic board specific setup. Pinmux has been handled already. - */ -int board_init(void) -{ - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - if (read_eeprom() < 0) - puts("Could not get board ID.\n"); - - gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; - - return 0; -} - -#ifdef CONFIG_DRIVER_TI_CPSW -static void cpsw_control(int enabled) -{ - /* VTP can be added here */ - - return; -} - -static struct cpsw_slave_data cpsw_slaves[] = { - { - .slave_reg_ofs = 0x208, - .sliver_reg_ofs = 0xd80, - .phy_id = 0, - }, - { - .slave_reg_ofs = 0x308, - .sliver_reg_ofs = 0xdc0, - .phy_id = 1, - }, -}; - -static struct cpsw_platform_data cpsw_data = { - .mdio_base = AM335X_CPSW_MDIO_BASE, - .cpsw_base = AM335X_CPSW_BASE, - .mdio_div = 0xff, - .channels = 8, - .cpdma_reg_ofs = 0x800, - .slaves = 1, - .slave_data = cpsw_slaves, - .ale_reg_ofs = 0xd00, - .ale_entries = 1024, - .host_port_reg_ofs = 0x108, - .hw_stats_reg_ofs = 0x900, - .mac_control = (1 << 5), - .control = cpsw_control, - .host_port_num = 0, - .version = CPSW_CTRL_VERSION_2, -}; - -int board_eth_init(bd_t *bis) -{ - uint8_t mac_addr[6]; - uint32_t mac_hi, mac_lo; - - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { - debug("<ethaddr> not set. Reading from E-fuse\n"); - /* try reading mac address from efuse */ - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; - - if (is_valid_ether_addr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); - else - return -1; - } - - if (board_is_bone()) { - writel(MII_MODE_ENABLE, &cdev->miisel); - cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = - PHY_INTERFACE_MODE_MII; - } else { - writel(RGMII_MODE_ENABLE, &cdev->miisel); - cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = - PHY_INTERFACE_MODE_RGMII; - } - - return cpsw_register(&cpsw_data); -} -#endif diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c index 2b19506a34..bc2abb657c 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -44,6 +44,7 @@ const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER; const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP; const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL; +const struct cm_rtc *cmrtc = (struct cm_rtc *)CM_RTC; static void enable_interface_clocks(void) { @@ -114,6 +115,41 @@ static void enable_per_clocks(void) while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN) ; + /* UART1 */ +#ifdef CONFIG_SERIAL2 + writel(PRCM_MOD_EN, &cmper->uart1clkctrl); + while (readl(&cmper->uart1clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL2 */ + + /* UART2 */ +#ifdef CONFIG_SERIAL3 + writel(PRCM_MOD_EN, &cmper->uart2clkctrl); + while (readl(&cmper->uart2clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL3 */ + + /* UART3 */ +#ifdef CONFIG_SERIAL4 + writel(PRCM_MOD_EN, &cmper->uart3clkctrl); + while (readl(&cmper->uart3clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL4 */ + + /* UART4 */ +#ifdef CONFIG_SERIAL5 + writel(PRCM_MOD_EN, &cmper->uart4clkctrl); + while (readl(&cmper->uart4clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL5 */ + + /* UART5 */ +#ifdef CONFIG_SERIAL6 + writel(PRCM_MOD_EN, &cmper->uart5clkctrl); + while (readl(&cmper->uart5clkctrl) != PRCM_MOD_EN) + ; +#endif /* CONFIG_SERIAL6 */ + /* MMC0*/ writel(PRCM_MOD_EN, &cmper->mmc0clkctrl); while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN) @@ -153,6 +189,11 @@ static void enable_per_clocks(void) writel(PRCM_MOD_EN, &cmper->spi0clkctrl); while (readl(&cmper->spi0clkctrl) != PRCM_MOD_EN) ; + + /* RTC */ + writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl); + while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN) + ; } static void mpu_pll_config(void) diff --git a/arch/arm/cpu/armv7/am33xx/config.mk b/arch/arm/cpu/armv7/am33xx/config.mk index 5750bbdcb6..babf0eb5cc 100644 --- a/arch/arm/cpu/armv7/am33xx/config.mk +++ b/arch/arm/cpu/armv7/am33xx/config.mk @@ -13,6 +13,7 @@ # ifdef CONFIG_SPL_BUILD ALL-y += $(OBJTREE)/MLO +ALL-$(CONFIG_SPL_SPI_SUPPORT) += $(OBJTREE)/MLO.byteswap else ALL-y += $(obj)u-boot.img endif diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c index b2d7c0d956..01e3a5204e 100644 --- a/arch/arm/cpu/armv7/am33xx/emif4.c +++ b/arch/arm/cpu/armv7/am33xx/emif4.c @@ -47,78 +47,6 @@ void dram_init_banksize(void) static struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR; static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR; -static const struct ddr_data ddr2_data = { - .datardsratio0 = ((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20) - |(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)), - .datawdsratio0 = ((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20) - |(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)), - .datawiratio0 = ((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20) - |(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)), - .datagiratio0 = ((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20) - |(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)), - .datafwsratio0 = ((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20) - |(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)), - .datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20) - |(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)), - .datauserank0delay = DDR2_PHY_RANK0_DELAY, - .datadldiff0 = PHY_DLL_LOCK_DIFF, -}; - -static const struct cmd_control ddr2_cmd_ctrl_data = { - .cmd0csratio = DDR2_RATIO, - .cmd0dldiff = DDR2_DLL_LOCK_DIFF, - .cmd0iclkout = DDR2_INVERT_CLKOUT, - - .cmd1csratio = DDR2_RATIO, - .cmd1dldiff = DDR2_DLL_LOCK_DIFF, - .cmd1iclkout = DDR2_INVERT_CLKOUT, - - .cmd2csratio = DDR2_RATIO, - .cmd2dldiff = DDR2_DLL_LOCK_DIFF, - .cmd2iclkout = DDR2_INVERT_CLKOUT, -}; - -static const struct emif_regs ddr2_emif_reg_data = { - .sdram_config = DDR2_EMIF_SDCFG, - .ref_ctrl = DDR2_EMIF_SDREF, - .sdram_tim1 = DDR2_EMIF_TIM1, - .sdram_tim2 = DDR2_EMIF_TIM2, - .sdram_tim3 = DDR2_EMIF_TIM3, - .emif_ddr_phy_ctlr_1 = DDR2_EMIF_READ_LATENCY, -}; - -static const struct ddr_data ddr3_data = { - .datardsratio0 = DDR3_RD_DQS, - .datawdsratio0 = DDR3_WR_DQS, - .datafwsratio0 = DDR3_PHY_FIFO_WE, - .datawrsratio0 = DDR3_PHY_WR_DATA, - .datadldiff0 = PHY_DLL_LOCK_DIFF, -}; - -static const struct cmd_control ddr3_cmd_ctrl_data = { - .cmd0csratio = DDR3_RATIO, - .cmd0dldiff = DDR3_DLL_LOCK_DIFF, - .cmd0iclkout = DDR3_INVERT_CLKOUT, - - .cmd1csratio = DDR3_RATIO, - .cmd1dldiff = DDR3_DLL_LOCK_DIFF, - .cmd1iclkout = DDR3_INVERT_CLKOUT, - - .cmd2csratio = DDR3_RATIO, - .cmd2dldiff = DDR3_DLL_LOCK_DIFF, - .cmd2iclkout = DDR3_INVERT_CLKOUT, -}; - -static struct emif_regs ddr3_emif_reg_data = { - .sdram_config = DDR3_EMIF_SDCFG, - .ref_ctrl = DDR3_EMIF_SDREF, - .sdram_tim1 = DDR3_EMIF_TIM1, - .sdram_tim2 = DDR3_EMIF_TIM2, - .sdram_tim3 = DDR3_EMIF_TIM3, - .zq_config = DDR3_ZQ_CFG, - .emif_ddr_phy_ctlr_1 = DDR3_EMIF_READ_LATENCY, -}; - static void config_vtp(void) { writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_ENABLE, @@ -134,46 +62,26 @@ static void config_vtp(void) ; } -void config_ddr(short ddr_type) +void config_ddr(unsigned int pll, unsigned int ioctrl, + const struct ddr_data *data, const struct cmd_control *ctrl, + const struct emif_regs *regs) { - int ddr_pll, ioctrl_val; - const struct emif_regs *emif_regs; - const struct ddr_data *ddr_data; - const struct cmd_control *cmd_ctrl_data; - - if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR2) { - ddr_pll = 266; - cmd_ctrl_data = &ddr2_cmd_ctrl_data; - ddr_data = &ddr2_data; - ioctrl_val = DDR2_IOCTRL_VALUE; - emif_regs = &ddr2_emif_reg_data; - } else if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR3) { - ddr_pll = 303; - cmd_ctrl_data = &ddr3_cmd_ctrl_data; - ddr_data = &ddr3_data; - ioctrl_val = DDR3_IOCTRL_VALUE; - emif_regs = &ddr3_emif_reg_data; - } else { - puts("Unknown memory type"); - hang(); - } - enable_emif_clocks(); - ddr_pll_config(ddr_pll); + ddr_pll_config(pll); config_vtp(); - config_cmd_ctrl(cmd_ctrl_data); + config_cmd_ctrl(ctrl); - config_ddr_data(0, ddr_data); - config_ddr_data(1, ddr_data); + config_ddr_data(0, data); + config_ddr_data(1, data); - config_io_ctrl(ioctrl_val); + config_io_ctrl(ioctrl); /* Set CKE to be controlled by EMIF/DDR PHY */ writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl); /* Program EMIF instance */ - config_ddr_phy(emif_regs); - set_sdram_timings(emif_regs); - config_sdram(emif_regs); + config_ddr_phy(regs); + set_sdram_timings(regs); + config_sdram(regs); } #endif diff --git a/arch/arm/cpu/armv7/am33xx/mux.c b/arch/arm/cpu/armv7/am33xx/mux.c new file mode 100644 index 0000000000..2ded47228d --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/mux.c @@ -0,0 +1,33 @@ +/* + * mux.c + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/arch/mux.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> + +/* + * Configure the pin mux for the module + */ +void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux) +{ + int i; + + if (!mod_pin_mux) + return; + + for (i = 0; mod_pin_mux[i].reg_offset != -1; i++) + MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset); +} diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds index 1d8efb213b..9979c30853 100644 --- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds +++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds @@ -47,6 +47,11 @@ SECTIONS . = ALIGN(4); .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + + .u_boot_list : { + #include <u-boot.lst> + } + . = ALIGN(4); __image_copy_end = .; _end = .; diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index 9cee1d9b49..f3cd81ad98 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -50,7 +50,9 @@ DECLARE_GLOBAL_DATA_PTR; /* Declarations */ extern omap3_sysinfo sysinfo; static void omap3_setup_aux_cr(void); +#ifndef CONFIG_SYS_L2CACHE_OFF static void omap3_invalidate_l2_cache_secure(void); +#endif static const struct gpio_bank gpio_bank_34xx[6] = { { (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX }, @@ -410,19 +412,6 @@ static void omap3_update_aux_cr_secure(u32 set_bits, u32 clear_bits) } } -static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits) -{ - u32 acr; - - /* Read ACR */ - asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); - acr &= ~clear_bits; - acr |= set_bits; - - /* Write ACR - affects non-secure banked bits */ - asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr)); -} - static void omap3_setup_aux_cr(void) { /* Workaround for Cortex-A8 errata: #454179 #430973 @@ -436,6 +425,19 @@ static void omap3_setup_aux_cr(void) } #ifndef CONFIG_SYS_L2CACHE_OFF +static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits) +{ + u32 acr; + + /* Read ACR */ + asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); + acr &= ~clear_bits; + acr |= set_bits; + + /* Write ACR - affects non-secure banked bits */ + asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr)); +} + /* Invalidate the entire L2 cache from secure mode */ static void omap3_invalidate_l2_cache_secure(void) { diff --git a/arch/arm/cpu/armv7/socfpga/spl.c b/arch/arm/cpu/armv7/socfpga/spl.c index 944238bad1..84216eb1ef 100644 --- a/arch/arm/cpu/armv7/socfpga/spl.c +++ b/arch/arm/cpu/armv7/socfpga/spl.c @@ -21,7 +21,6 @@ #include <asm/utils.h> #include <version.h> #include <image.h> -#include <malloc.h> #include <asm/arch/reset_manager.h> #include <spl.h> @@ -37,9 +36,6 @@ u32 spl_boot_device(void) */ void spl_board_init(void) { - /* init timer for enabling delay function */ - timer_init(); - /* de-assert reset for peripherals and bridges based on handoff */ reset_deassert_peripherals_handoff(); diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds index 7199de4af1..81d954f2de 100644 --- a/arch/arm/cpu/ixp/u-boot.lds +++ b/arch/arm/cpu/ixp/u-boot.lds @@ -46,9 +46,11 @@ SECTIONS . = ALIGN(4); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = ALIGN(4); diff --git a/arch/arm/cpu/lh7a40x/speed.c b/arch/arm/cpu/lh7a40x/speed.c deleted file mode 100644 index 333ebb504a..0000000000 --- a/arch/arm/cpu/lh7a40x/speed.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * (C) Copyright 2001-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, d.mueller@elsoft.ch - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <lh7a40x.h> - - -/* ------------------------------------------------------------------------- */ -/* NOTE: This describes the proper use of this file. - * - * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL. - * - * get_FCLK(), get_HCLK(), get_PCLK() return the clock of - * the specified bus in HZ. - */ -/* ------------------------------------------------------------------------- */ - -ulong get_PLLCLK (void) -{ - return CONFIG_SYS_CLK_FREQ; -} - -/* return FCLK frequency */ -ulong get_FCLK (void) -{ - lh7a40x_csc_t* csc = LH7A40X_CSC_PTR; - ulong maindiv1, maindiv2, prediv, ps; - - /* - * from userguide 6.1.1.2 - * - * FCLK = ((MAINDIV1 +2) * (MAINDIV2 +2) * 14.7456MHz) / - * ((PREDIV+2) * (2^PS)) - */ - maindiv2 = (csc->clkset & CLKSET_MAINDIV2) >> 11; - maindiv1 = (csc->clkset & CLKSET_MAINDIV1) >> 7; - prediv = (csc->clkset & CLKSET_PREDIV) >> 2; - ps = (csc->clkset & CLKSET_PS) >> 16; - - return (((maindiv2 + 2) * (maindiv1 + 2) * CONFIG_SYS_CLK_FREQ) / - ((prediv + 2) * (1 << ps))); -} - - -/* return HCLK frequency */ -ulong get_HCLK (void) -{ - lh7a40x_csc_t* csc = LH7A40X_CSC_PTR; - - return (get_FCLK () / ((csc->clkset & CLKSET_HCLKDIV) + 1)); -} - -/* return PCLK frequency */ -ulong get_PCLK (void) -{ - lh7a40x_csc_t* csc = LH7A40X_CSC_PTR; - - return (get_HCLK () / - (1 << (((csc->clkset & CLKSET_PCLKDIV) >> 16) + 1))); -} diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S deleted file mode 100644 index 33b9269c70..0000000000 --- a/arch/arm/cpu/lh7a40x/start.S +++ /dev/null @@ -1,506 +0,0 @@ -/* - * armboot - Startup Code for ARM920 CPU-core - * - * Copyright (c) 2001 Marius Gröger <mag@sysgo.de> - * Copyright (c) 2002 Alex Züpke <azu@sysgo.de> - * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <asm-offsets.h> -#include <config.h> -#include <version.h> - -/* - ************************************************************************* - * - * Jump vector table as in table 3.1 in [1] - * - ************************************************************************* - */ - - -.globl _start -_start: b reset - ldr pc, _undefined_instruction - ldr pc, _software_interrupt - ldr pc, _prefetch_abort - ldr pc, _data_abort - ldr pc, _not_used - ldr pc, _irq - ldr pc, _fiq - -_undefined_instruction: .word undefined_instruction -_software_interrupt: .word software_interrupt -_prefetch_abort: .word prefetch_abort -_data_abort: .word data_abort -_not_used: .word not_used -_irq: .word irq -_fiq: .word fiq - - .balignl 16,0xdeadbeef - - -/* - ************************************************************************* - * - * Startup Code (reset vector) - * - * do important init only if we don't start from memory! - * relocate armboot to ram - * setup stack - * jump to second stage - * - ************************************************************************* - */ - -.globl _TEXT_BASE -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - -/* - * These are defined in the board-specific linker script. - * Subtracting _start from them lets the linker put their - * relative position in the executable instead of leaving - * them null. - */ -.globl _bss_start_ofs -_bss_start_ofs: - .word __bss_start - _start - -.globl _bss_end_ofs -_bss_end_ofs: - .word __bss_end__ - _start - -.globl _end_ofs -_end_ofs: - .word _end - _start - -#ifdef CONFIG_USE_IRQ -/* IRQ stack memory (calculated at run-time) */ -.globl IRQ_STACK_START -IRQ_STACK_START: - .word 0x0badc0de - -/* IRQ stack memory (calculated at run-time) */ -.globl FIQ_STACK_START -FIQ_STACK_START: - .word 0x0badc0de -#endif - -/* IRQ stack memory (calculated at run-time) + 8 bytes */ -.globl IRQ_STACK_START_IN -IRQ_STACK_START_IN: - .word 0x0badc0de - -/* - * the actual reset code - */ - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - -#define pWDTCTL 0x80001400 /* Watchdog Timer control register */ -#define pINTENC 0x8000050C /* Interrupt-Controller enable clear register */ -#define pCLKSET 0x80000420 /* clock divisor register */ - - /* disable watchdog, set watchdog control register to - * all zeros (default reset) - */ - ldr r0, =pWDTCTL - mov r1, #0x0 - str r1, [r0] - - /* - * mask all IRQs by setting all bits in the INTENC register (default) - */ - mov r1, #0xffffffff - ldr r0, =pINTENC - str r1, [r0] - - /* FCLK:HCLK:PCLK = 1:2:2 */ - /* default FCLK is 200 MHz, using 14.7456 MHz fin */ - ldr r0, =pCLKSET - ldr r1, =0x0004ee39 -@ ldr r1, =0x0005ee39 @ 1: 2: 4 - str r1, [r0] - - /* - * we do sys-critical inits only at reboot, - * not when booting from ram! - */ -#ifndef CONFIG_SKIP_LOWLEVEL_INIT - bl cpu_init_crit -#endif - -/* Set stackpointer in internal RAM to call board_init_f */ -call_board_init_f: - ldr sp, =(CONFIG_SYS_INIT_SP_ADDR) - bic sp, sp, #7 /* 8-byte alignment for ABI compliance */ - ldr r0,=0x00000000 - bl board_init_f - -/*------------------------------------------------------------------------------*/ - -/* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. - * - */ - .globl relocate_code -relocate_code: - mov r4, r0 /* save addr_sp */ - mov r5, r1 /* save addr of gd */ - mov r6, r2 /* save addr of destination */ - - /* Set up the stack */ -stack_setup: - mov sp, r4 - - adr r0, _start - cmp r0, r6 - moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ - beq clear_bss /* skip relocation */ - mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs - add r2, r0, r3 /* r2 <- source end address */ - -copy_loop: - ldmia r0!, {r9-r10} /* copy from source address [r0] */ - stmia r1!, {r9-r10} /* copy to target address [r1] */ - cmp r0, r2 /* until source end address [r2] */ - blo copy_loop - -#ifndef CONFIG_SPL_BUILD - /* - * fix .rel.dyn relocations - */ - ldr r0, _TEXT_BASE /* r0 <- Text base */ - sub r9, r6, r0 /* r9 <- relocation offset */ - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ - add r10, r10, r0 /* r10 <- sym table in FLASH */ - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ -fixloop: - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ - add r0, r0, r9 /* r0 <- location to fix up in RAM */ - ldr r1, [r2, #4] - and r7, r1, #0xff - cmp r7, #23 /* relative fixup? */ - beq fixrel - cmp r7, #2 /* absolute fixup? */ - beq fixabs - /* ignore unknown type of fixup */ - b fixnext -fixabs: - /* absolute fix: set location to (offset) symbol value */ - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ - add r1, r10, r1 /* r1 <- address of symbol in table */ - ldr r1, [r1, #4] /* r1 <- symbol value */ - add r1, r1, r9 /* r1 <- relocated sym addr */ - b fixnext -fixrel: - /* relative fix: increase location by offset */ - ldr r1, [r0] - add r1, r1, r9 -fixnext: - str r1, [r0] - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ - cmp r2, r3 - blo fixloop -#endif - -clear_bss: -#ifndef CONFIG_SPL_BUILD - ldr r0, _bss_start_ofs - ldr r1, _bss_end_ofs - mov r4, r6 /* reloc addr */ - add r0, r0, r4 - add r1, r1, r4 - mov r2, #0x00000000 /* clear */ - -clbss_l:cmp r0, r1 /* clear loop... */ - bhs clbss_e /* if reached end of bss, exit */ - str r2, [r0] - add r0, r0, #4 - b clbss_l -clbss_e: -#endif - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - ldr r0, _board_init_r_ofs - adr r1, _start - add lr, r0, r1 - add lr, lr, r9 - /* setup parameters for board_init_r */ - mov r0, r5 /* gd_t */ - mov r1, r6 /* dest_addr */ - /* jump to it ... */ - mov pc, lr - -_board_init_r_ofs: - .word board_init_r - _start - -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - -/* - ************************************************************************* - * - * CPU_init_critical registers - * - * setup important registers - * setup memory timing - * - ************************************************************************* - */ - - -cpu_init_crit: - /* - * flush v4 I/D caches - */ - mov r0, #0 - mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ - mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ - - /* - * disable MMU stuff and caches - */ - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) - bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) - orr r0, r0, #0x00000002 @ set bit 2 (A) Align - orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache - orr r0, r0, #0x40000000 @ set bit 30 (nF) notFastBus - mcr p15, 0, r0, c1, c0, 0 - - - /* - * before relocating, we have to setup RAM timing - * because memory timing is board-dependend, you will - * find a lowlevel_init.S in your board directory. - */ - mov ip, lr - bl lowlevel_init - mov lr, ip - - mov pc, lr - - -/* - ************************************************************************* - * - * Interrupt handling - * - ************************************************************************* - */ - -@ -@ IRQ stack frame. -@ -#define S_FRAME_SIZE 72 - -#define S_OLD_R0 68 -#define S_PSR 64 -#define S_PC 60 -#define S_LR 56 -#define S_SP 52 - -#define S_IP 48 -#define S_FP 44 -#define S_R10 40 -#define S_R9 36 -#define S_R8 32 -#define S_R7 28 -#define S_R6 24 -#define S_R5 20 -#define S_R4 16 -#define S_R3 12 -#define S_R2 8 -#define S_R1 4 -#define S_R0 0 - -#define MODE_SVC 0x13 -#define I_BIT 0x80 - -/* - * use bad_save_user_regs for abort/prefetch/undef/swi ... - * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling - */ - - .macro bad_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - ldr r2, IRQ_STACK_START_IN - ldmia r2, {r2 - r3} @ get pc, cpsr - add r0, sp, #S_FRAME_SIZE @ restore sp_SVC - - add r5, sp, #S_SP - mov r1, lr - stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr - mov r0, sp - .endm - - .macro irq_save_user_regs - sub sp, sp, #S_FRAME_SIZE - stmia sp, {r0 - r12} @ Calling r0-r12 - add r8, sp, #S_PC - stmdb r8, {sp, lr}^ @ Calling SP, LR - str lr, [r8, #0] @ Save calling PC - mrs r6, spsr - str r6, [r8, #4] @ Save CPSR - str r0, [r8, #8] @ Save OLD_R0 - mov r0, sp - .endm - - .macro irq_restore_user_regs - ldmia sp, {r0 - lr}^ @ Calling r0 - lr - mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC - add sp, sp, #S_FRAME_SIZE - subs pc, lr, #4 @ return & move spsr_svc into cpsr - .endm - - .macro get_bad_stack - ldr r13, IRQ_STACK_START_IN @ setup our mode stack - - str lr, [r13] @ save caller lr / spsr - mrs lr, spsr - str lr, [r13, #4] - - mov r13, #MODE_SVC @ prepare SVC-Mode - @ msr spsr_c, r13 - msr spsr, r13 - mov lr, pc - movs pc, lr - .endm - - .macro get_irq_stack @ setup IRQ stack - ldr sp, IRQ_STACK_START - .endm - - .macro get_fiq_stack @ setup FIQ stack - ldr sp, FIQ_STACK_START - .endm - -/* - * exception handlers - */ - .align 5 -undefined_instruction: - get_bad_stack - bad_save_user_regs - bl do_undefined_instruction - - .align 5 -software_interrupt: - get_bad_stack - bad_save_user_regs - bl do_software_interrupt - - .align 5 -prefetch_abort: - get_bad_stack - bad_save_user_regs - bl do_prefetch_abort - - .align 5 -data_abort: - get_bad_stack - bad_save_user_regs - bl do_data_abort - - .align 5 -not_used: - get_bad_stack - bad_save_user_regs - bl do_not_used - -#ifdef CONFIG_USE_IRQ - - .align 5 -irq: - get_irq_stack - irq_save_user_regs - bl do_irq - irq_restore_user_regs - - .align 5 -fiq: - get_fiq_stack - /* someone ought to write a more effiction fiq_save_user_regs */ - irq_save_user_regs - bl do_fiq - irq_restore_user_regs - -#else - - .align 5 -irq: - get_bad_stack - bad_save_user_regs - bl do_irq - - .align 5 -fiq: - get_bad_stack - bad_save_user_regs - bl do_fiq - -#endif - - .align 5 -.globl reset_cpu -reset_cpu: - bl disable_interrupts - - /* Disable watchdog */ - ldr r1, =pWDTCTL - mov r3, #0 - str r3, [r1] - - /* reset counter */ - ldr r3, =0x00001984 - str r3, [r1, #4] - - /* Enable the watchdog */ - mov r3, #1 - str r3, [r1] - -_loop_forever: - b _loop_forever diff --git a/arch/arm/cpu/lh7a40x/timer.c b/arch/arm/cpu/lh7a40x/timer.c deleted file mode 100644 index 58b35b15e6..0000000000 --- a/arch/arm/cpu/lh7a40x/timer.c +++ /dev/null @@ -1,182 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <lh7a40x.h> - -static ulong timer_load_val = 0; - -/* macro to read the 16 bit timer */ -static inline ulong READ_TIMER(void) -{ - lh7a40x_timers_t* timers = LH7A40X_TIMERS_PTR; - lh7a40x_timer_t* timer = &timers->timer1; - - return (timer->value & 0x0000ffff); -} - -static ulong timestamp; -static ulong lastdec; - -int timer_init (void) -{ - lh7a40x_timers_t* timers = LH7A40X_TIMERS_PTR; - lh7a40x_timer_t* timer = &timers->timer1; - - /* a periodic timer using the 508kHz source */ - timer->control = (TIMER_PER | TIMER_CLK508K); - - if (timer_load_val == 0) { - /* - * 10ms period with 508.469kHz clock = 5084 - */ - timer_load_val = CONFIG_SYS_HZ/100; - } - - /* load value for 10 ms timeout */ - lastdec = timer->load = timer_load_val; - - /* auto load, start timer */ - timer->control = timer->control | TIMER_EN; - timestamp = 0; - - return (0); -} - -/* - * timer without interrupts - */ -ulong get_timer (ulong base) -{ - return (get_timer_masked() - base); -} - -void __udelay (unsigned long usec) -{ - ulong tmo,tmp; - - /* normalize */ - if (usec >= 1000) { - tmo = usec / 1000; - tmo *= CONFIG_SYS_HZ; - tmo /= 1000; - } - else { - if (usec > 1) { - tmo = usec * CONFIG_SYS_HZ; - tmo /= (1000*1000); - } - else - tmo = 1; - } - - /* check for rollover during this delay */ - tmp = get_timer (0); - if ((tmp + tmo) < tmp ) - reset_timer_masked(); /* timer would roll over */ - else - tmo += tmp; - - while (get_timer_masked () < tmo); -} - -void reset_timer_masked (void) -{ - /* reset time */ - lastdec = READ_TIMER(); - timestamp = 0; -} - -ulong get_timer_masked (void) -{ - ulong now = READ_TIMER(); - - if (lastdec >= now) { - /* normal mode */ - timestamp += (lastdec - now); - } else { - /* we have an overflow ... */ - timestamp += ((lastdec + timer_load_val) - now); - } - lastdec = now; - - return timestamp; -} - -void udelay_masked (unsigned long usec) -{ - ulong tmo; - ulong endtime; - signed long diff; - - /* normalize */ - if (usec >= 1000) { - tmo = usec / 1000; - tmo *= CONFIG_SYS_HZ; - tmo /= 1000; - } else { - if (usec > 1) { - tmo = usec * CONFIG_SYS_HZ; - tmo /= (1000*1000); - } else { - tmo = 1; - } - } - - endtime = get_timer_masked () + tmo; - - do { - ulong now = get_timer_masked (); - diff = endtime - now; - } while (diff >= 0); -} - -/* - * This function is derived from PowerPC code (read timebase as long long). - * On ARM it just returns the timer value. - */ -unsigned long long get_ticks(void) -{ - return get_timer(0); -} - -/* - * This function is derived from PowerPC code (timebase clock frequency). - * On ARM it returns the number of timer ticks per second. - */ -ulong get_tbclk (void) -{ - ulong tbclk; - - tbclk = timer_load_val * 100; - - return tbclk; -} diff --git a/arch/arm/cpu/tegra20-common/emc.c b/arch/arm/cpu/tegra20-common/emc.c index 97420d7066..90edf00a5e 100644 --- a/arch/arm/cpu/tegra20-common/emc.c +++ b/arch/arm/cpu/tegra20-common/emc.c @@ -257,7 +257,7 @@ static int decode_emc(const void *blob, unsigned rate, struct emc_ctlr **emcp, int tegra_set_emc(const void *blob, unsigned rate) { struct emc_ctlr *emc; - const u32 *table; + const u32 *table = NULL; int err, i; err = decode_emc(blob, rate, &emc, &table); diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index e49ca0c552..e6b202bd14 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -34,8 +34,8 @@ SECTIONS .text : { __image_copy_start = .; - CPUDIR/start.o (.text) - *(.text) + CPUDIR/start.o (.text*) + *(.text*) } . = ALIGN(4); @@ -43,15 +43,17 @@ SECTIONS . = ALIGN(4); .data : { - *(.data) + *(.data*) } . = ALIGN(4); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = ALIGN(4); @@ -81,7 +83,7 @@ SECTIONS .bss __rel_dyn_start (OVERLAY) : { __bss_start = .; - *(.bss) + *(.bss*) . = ALIGN(4); __bss_end__ = .; } @@ -92,3 +94,7 @@ SECTIONS /DISCARD/ : { *(.interp*) } /DISCARD/ : { *(.gnu*) } } + +#if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE) +ASSERT(__bss_end__ < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big"); +#endif diff --git a/arch/arm/imx-common/cmd_bmode.c b/arch/arm/imx-common/cmd_bmode.c index 02fe72ed7f..ddc14b099e 100644 --- a/arch/arm/imx-common/cmd_bmode.c +++ b/arch/arm/imx-common/cmd_bmode.c @@ -24,6 +24,7 @@ #include <asm/io.h> #include <asm/imx-common/boot_mode.h> #include <malloc.h> +#include <command.h> static const struct boot_mode *modes[2]; @@ -103,9 +104,11 @@ void add_board_boot_modes(const struct boot_mode *p) int size; char *dest; - if (__u_boot_cmd_bmode.usage) { - free(__u_boot_cmd_bmode.usage); - __u_boot_cmd_bmode.usage = NULL; + cmd_tbl_t *entry = ll_entry_get(cmd_tbl_t, bmode, cmd); + + if (entry->usage) { + free(entry->usage); + entry->usage = NULL; } modes[0] = p; @@ -114,6 +117,6 @@ void add_board_boot_modes(const struct boot_mode *p) dest = malloc(size); if (dest) { create_usage(dest); - __u_boot_cmd_bmode.usage = dest; + entry->usage = dest; } } diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index 6cfbef76a7..819fd2f026 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -169,6 +169,12 @@ struct cm_dpll { unsigned int clktimer2clk; /* offset 0x08 */ }; +/* Control Module RTC registers */ +struct cm_rtc { + unsigned int rtcclkctrl; /* offset 0x0 */ + unsigned int clkstctrl; /* offset 0x4 */ +}; + /* Watchdog timer registers */ struct wd_timer { unsigned int resv1[4]; @@ -218,6 +224,15 @@ struct gptimer { unsigned int tcar2; /* offset 0x58 */ }; +/* RTC Registers */ +struct rtc_regs { + unsigned int res[21]; + unsigned int osc; /* offset 0x54 */ + unsigned int res2[5]; + unsigned int kick0r; /* offset 0x6c */ + unsigned int kick1r; /* offset 0x70 */ +}; + /* UART Registers */ struct uart_sys { unsigned int resv1[21]; diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h index 6b22c45f77..8e69fb67b1 100644 --- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h +++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h @@ -29,40 +29,41 @@ #define PHY_DLL_LOCK_DIFF 0x0 #define DDR_CKE_CTRL_NORMAL 0x1 -#define DDR2_EMIF_READ_LATENCY 0x100005 /* Enable Dynamic Power Down */ -#define DDR2_EMIF_TIM1 0x0666B3C9 -#define DDR2_EMIF_TIM2 0x243631CA -#define DDR2_EMIF_TIM3 0x0000033F -#define DDR2_EMIF_SDCFG 0x41805332 -#define DDR2_EMIF_SDREF 0x0000081a -#define DDR2_DLL_LOCK_DIFF 0x0 -#define DDR2_RATIO 0x80 -#define DDR2_INVERT_CLKOUT 0x00 -#define DDR2_RD_DQS 0x12 -#define DDR2_WR_DQS 0x00 -#define DDR2_PHY_WRLVL 0x00 -#define DDR2_PHY_GATELVL 0x00 -#define DDR2_PHY_WR_DATA 0x40 -#define DDR2_PHY_FIFO_WE 0x80 -#define DDR2_PHY_RANK0_DELAY 0x1 -#define DDR2_IOCTRL_VALUE 0x18B +/* Micron MT47H128M16RT-25E */ +#define MT47H128M16RT25E_EMIF_READ_LATENCY 0x100005 +#define MT47H128M16RT25E_EMIF_TIM1 0x0666B3C9 +#define MT47H128M16RT25E_EMIF_TIM2 0x243631CA +#define MT47H128M16RT25E_EMIF_TIM3 0x0000033F +#define MT47H128M16RT25E_EMIF_SDCFG 0x41805332 +#define MT47H128M16RT25E_EMIF_SDREF 0x0000081a +#define MT47H128M16RT25E_DLL_LOCK_DIFF 0x0 +#define MT47H128M16RT25E_RATIO 0x80 +#define MT47H128M16RT25E_INVERT_CLKOUT 0x00 +#define MT47H128M16RT25E_RD_DQS 0x12 +#define MT47H128M16RT25E_WR_DQS 0x00 +#define MT47H128M16RT25E_PHY_WRLVL 0x00 +#define MT47H128M16RT25E_PHY_GATELVL 0x00 +#define MT47H128M16RT25E_PHY_WR_DATA 0x40 +#define MT47H128M16RT25E_PHY_FIFO_WE 0x80 +#define MT47H128M16RT25E_PHY_RANK0_DELAY 0x1 +#define MT47H128M16RT25E_IOCTRL_VALUE 0x18B /* Micron MT41J128M16JT-125 */ -#define DDR3_EMIF_READ_LATENCY 0x06 -#define DDR3_EMIF_TIM1 0x0888A39B -#define DDR3_EMIF_TIM2 0x26337FDA -#define DDR3_EMIF_TIM3 0x501F830F -#define DDR3_EMIF_SDCFG 0x61C04AB2 -#define DDR3_EMIF_SDREF 0x0000093B -#define DDR3_ZQ_CFG 0x50074BE4 -#define DDR3_DLL_LOCK_DIFF 0x1 -#define DDR3_RATIO 0x40 -#define DDR3_INVERT_CLKOUT 0x1 -#define DDR3_RD_DQS 0x3B -#define DDR3_WR_DQS 0x85 -#define DDR3_PHY_WR_DATA 0xC1 -#define DDR3_PHY_FIFO_WE 0x100 -#define DDR3_IOCTRL_VALUE 0x18B +#define MT41J128MJT125_EMIF_READ_LATENCY 0x06 +#define MT41J128MJT125_EMIF_TIM1 0x0888A39B +#define MT41J128MJT125_EMIF_TIM2 0x26337FDA +#define MT41J128MJT125_EMIF_TIM3 0x501F830F +#define MT41J128MJT125_EMIF_SDCFG 0x61C04AB2 +#define MT41J128MJT125_EMIF_SDREF 0x0000093B +#define MT41J128MJT125_ZQ_CFG 0x50074BE4 +#define MT41J128MJT125_DLL_LOCK_DIFF 0x1 +#define MT41J128MJT125_RATIO 0x40 +#define MT41J128MJT125_INVERT_CLKOUT 0x1 +#define MT41J128MJT125_RD_DQS 0x3B +#define MT41J128MJT125_WR_DQS 0x85 +#define MT41J128MJT125_PHY_WR_DATA 0xC1 +#define MT41J128MJT125_PHY_FIFO_WE 0x100 +#define MT41J128MJT125_IOCTRL_VALUE 0x18B /** * Configure SDRAM @@ -189,6 +190,8 @@ struct ddr_ctrl { unsigned int ddrckectrl; }; -void config_ddr(short ddr_type); +void config_ddr(unsigned int pll, unsigned int ioctrl, + const struct ddr_data *data, const struct cmd_control *ctrl, + const struct emif_regs *regs); #endif /* _DDR_DEFS_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 62332f2ded..5bd4bc8722 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -61,6 +61,7 @@ #define CM_WKUP 0x44E00400 #define CM_DPLL 0x44E00500 #define CM_DEVICE 0x44E00700 +#define CM_RTC 0x44E00800 #define CM_CEFUSE 0x44E00A00 #define PRM_DEVICE 0x44E00F00 @@ -83,4 +84,7 @@ #define AM335X_CPSW_BASE 0x4A100000 #define AM335X_CPSW_MDIO_BASE 0x4A101000 +/* RTC base address */ +#define AM335X_RTC_BASE 0x44E3E000 + #endif /* __AM33XX_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h new file mode 100644 index 0000000000..aed6b00cc6 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/mux.h @@ -0,0 +1,261 @@ +/* + * mux.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MUX_H_ +#define _MUX_H_ + +#include <common.h> +#include <asm/io.h> + +#define MUX_CFG(value, offset) \ + __raw_writel(value, (CTRL_BASE + offset)); + +/* PAD Control Fields */ +#define SLEWCTRL (0x1 << 6) +#define RXACTIVE (0x1 << 5) +#define PULLUP_EN (0x1 << 4) /* Pull UP Selection */ +#define PULLUDEN (0x0 << 3) /* Pull up enabled */ +#define PULLUDDIS (0x1 << 3) /* Pull up disabled */ +#define MODE(val) val /* used for Readability */ + +/* + * PAD CONTROL OFFSETS + * Field names corresponds to the pad signal name + */ +struct pad_signals { + int gpmc_ad0; + int gpmc_ad1; + int gpmc_ad2; + int gpmc_ad3; + int gpmc_ad4; + int gpmc_ad5; + int gpmc_ad6; + int gpmc_ad7; + int gpmc_ad8; + int gpmc_ad9; + int gpmc_ad10; + int gpmc_ad11; + int gpmc_ad12; + int gpmc_ad13; + int gpmc_ad14; + int gpmc_ad15; + int gpmc_a0; + int gpmc_a1; + int gpmc_a2; + int gpmc_a3; + int gpmc_a4; + int gpmc_a5; + int gpmc_a6; + int gpmc_a7; + int gpmc_a8; + int gpmc_a9; + int gpmc_a10; + int gpmc_a11; + int gpmc_wait0; + int gpmc_wpn; + int gpmc_be1n; + int gpmc_csn0; + int gpmc_csn1; + int gpmc_csn2; + int gpmc_csn3; + int gpmc_clk; + int gpmc_advn_ale; + int gpmc_oen_ren; + int gpmc_wen; + int gpmc_be0n_cle; + int lcd_data0; + int lcd_data1; + int lcd_data2; + int lcd_data3; + int lcd_data4; + int lcd_data5; + int lcd_data6; + int lcd_data7; + int lcd_data8; + int lcd_data9; + int lcd_data10; + int lcd_data11; + int lcd_data12; + int lcd_data13; + int lcd_data14; + int lcd_data15; + int lcd_vsync; + int lcd_hsync; + int lcd_pclk; + int lcd_ac_bias_en; + int mmc0_dat3; + int mmc0_dat2; + int mmc0_dat1; + int mmc0_dat0; + int mmc0_clk; + int mmc0_cmd; + int mii1_col; + int mii1_crs; + int mii1_rxerr; + int mii1_txen; + int mii1_rxdv; + int mii1_txd3; + int mii1_txd2; + int mii1_txd1; + int mii1_txd0; + int mii1_txclk; + int mii1_rxclk; + int mii1_rxd3; + int mii1_rxd2; + int mii1_rxd1; + int mii1_rxd0; + int rmii1_refclk; + int mdio_data; + int mdio_clk; + int spi0_sclk; + int spi0_d0; + int spi0_d1; + int spi0_cs0; + int spi0_cs1; + int ecap0_in_pwm0_out; + int uart0_ctsn; + int uart0_rtsn; + int uart0_rxd; + int uart0_txd; + int uart1_ctsn; + int uart1_rtsn; + int uart1_rxd; + int uart1_txd; + int i2c0_sda; + int i2c0_scl; + int mcasp0_aclkx; + int mcasp0_fsx; + int mcasp0_axr0; + int mcasp0_ahclkr; + int mcasp0_aclkr; + int mcasp0_fsr; + int mcasp0_axr1; + int mcasp0_ahclkx; + int xdma_event_intr0; + int xdma_event_intr1; + int nresetin_out; + int porz; + int nnmi; + int osc0_in; + int osc0_out; + int rsvd1; + int tms; + int tdi; + int tdo; + int tck; + int ntrst; + int emu0; + int emu1; + int osc1_in; + int osc1_out; + int pmic_power_en; + int rtc_porz; + int rsvd2; + int ext_wakeup; + int enz_kaldo_1p8v; + int usb0_dm; + int usb0_dp; + int usb0_ce; + int usb0_id; + int usb0_vbus; + int usb0_drvvbus; + int usb1_dm; + int usb1_dp; + int usb1_ce; + int usb1_id; + int usb1_vbus; + int usb1_drvvbus; + int ddr_resetn; + int ddr_csn0; + int ddr_cke; + int ddr_ck; + int ddr_nck; + int ddr_casn; + int ddr_rasn; + int ddr_wen; + int ddr_ba0; + int ddr_ba1; + int ddr_ba2; + int ddr_a0; + int ddr_a1; + int ddr_a2; + int ddr_a3; + int ddr_a4; + int ddr_a5; + int ddr_a6; + int ddr_a7; + int ddr_a8; + int ddr_a9; + int ddr_a10; + int ddr_a11; + int ddr_a12; + int ddr_a13; + int ddr_a14; + int ddr_a15; + int ddr_odt; + int ddr_d0; + int ddr_d1; + int ddr_d2; + int ddr_d3; + int ddr_d4; + int ddr_d5; + int ddr_d6; + int ddr_d7; + int ddr_d8; + int ddr_d9; + int ddr_d10; + int ddr_d11; + int ddr_d12; + int ddr_d13; + int ddr_d14; + int ddr_d15; + int ddr_dqm0; + int ddr_dqm1; + int ddr_dqs0; + int ddr_dqsn0; + int ddr_dqs1; + int ddr_dqsn1; + int ddr_vref; + int ddr_vtp; + int ddr_strben0; + int ddr_strben1; + int ain7; + int ain6; + int ain5; + int ain4; + int ain3; + int ain2; + int ain1; + int ain0; + int vrefp; + int vrefn; +}; + +struct module_pin_mux { + short reg_offset; + unsigned char val; +}; + +/* Pad control register offset */ +#define PAD_CTRL_BASE 0x800 +#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \ + (PAD_CTRL_BASE))->x) + +/* + * Configure the pin mux for the module + */ +void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux); + +#endif diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h index 63ed10b257..644ff353fe 100644 --- a/arch/arm/include/asm/arch-am33xx/spl.h +++ b/arch/arm/include/asm/arch-am33xx/spl.h @@ -27,6 +27,7 @@ #define BOOT_DEVICE_NAND 5 #define BOOT_DEVICE_MMC1 8 #define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */ +#define BOOT_DEVICE_SPI 11 #define BOOT_DEVICE_UART 65 #define BOOT_DEVICE_CPGMAC 70 #define BOOT_DEVICE_MMC2_2 0xFF diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 819ea650f0..9cf35e0257 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -19,24 +19,6 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ -/* - * AM335x parts define a system EEPROM that defines certain sub-fields. - * We use these fields to in turn see what board we are on, and what - * that might require us to set or not set. - */ -#define HDR_NO_OF_MAC_ADDR 3 -#define HDR_ETH_ALEN 6 -#define HDR_NAME_LEN 8 - -struct am335x_baseboard_id { - unsigned int magic; - char name[HDR_NAME_LEN]; - char version[4]; - char serial[12]; - char config[32]; - char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN]; -}; - #define BOARD_REV_ID 0x0 u32 get_cpu_rev(void); @@ -51,13 +33,4 @@ u32 get_device_type(void); void setup_clocks_for_console(void); void ddr_pll_config(unsigned int ddrpll_M); -/* - * We have three pin mux functions that must exist. We must be able to enable - * uart0, for initial output and i2c0 to read the main EEPROM. We then have a - * main pinmux function that can be overridden to enable all other pinmux that - * is required on the board. - */ -void enable_uart0_pin_mux(void); -void enable_i2c0_pin_mux(void); -void enable_board_pin_mux(struct am335x_baseboard_id *header); #endif diff --git a/arch/arm/include/asm/arch-arm720t/hardware.h b/arch/arm/include/asm/arch-arm720t/hardware.h index 0a357b1e0a..0a766108a6 100644 --- a/arch/arm/include/asm/arch-arm720t/hardware.h +++ b/arch/arm/include/asm/arch-arm720t/hardware.h @@ -24,9 +24,7 @@ * MA 02111-1307 USA */ -#if defined(CONFIG_NETARM) -#include <asm/arch-arm720t/netarm_registers.h> -#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) +#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* include IntegratorCP/CM720T specific hardware file if there was one */ #else #error No hardware file defined for this configuration diff --git a/arch/arm/include/asm/arch-arm720t/netarm_dma_module.h b/arch/arm/include/asm/arch-arm720t/netarm_dma_module.h deleted file mode 100644 index 328eaf0da9..0000000000 --- a/arch/arm/include/asm/arch-arm720t/netarm_dma_module.h +++ /dev/null @@ -1,182 +0,0 @@ -/* * include/asm-armnommu/arch-netarm/netarm_dma_module.h - * - * Copyright (C) 2000 NETsilicon, Inc. - * Copyright (C) 2000 WireSpeed Communications Corporation - * - * This software is copyrighted by WireSpeed. LICENSEE agrees that - * it will not delete this copyright notice, trademarks or protective - * notices from any copy made by LICENSEE. - * - * This software is provided "AS-IS" and any express or implied - * warranties or conditions, including but not limited to any - * implied warranties of merchantability and fitness for a particular - * purpose regarding this software. In no event shall WireSpeed - * be liable for any indirect, consequential, or incidental damages, - * loss of profits or revenue, loss of use or data, or interruption - * of business, whether the alleged damages are labeled in contract, - * tort, or indemnity. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * author(s) : Joe deBlaquiere - * David Smith - */ - -#ifndef __NETARM_DMA_MODULE_REGISTERS_H -#define __NETARM_DMA_MODULE_REGISTERS_H - -/* GEN unit register offsets */ - -#define NETARM_DMA_MODULE_BASE (0xFF900000) - -#define get_dma_reg_addr(c) ((volatile unsigned int *)(NETARM_DMA_MODULE_BASE + (c))) - -#define NETARM_DMA1A_BFR_DESCRPTOR_PTR (0x00) -#define NETARM_DMA1A_CONTROL (0x10) -#define NETARM_DMA1A_STATUS (0x14) -#define NETARM_DMA1B_BFR_DESCRPTOR_PTR (0x20) -#define NETARM_DMA1B_CONTROL (0x30) -#define NETARM_DMA1B_STATUS (0x34) -#define NETARM_DMA1C_BFR_DESCRPTOR_PTR (0x40) -#define NETARM_DMA1C_CONTROL (0x50) -#define NETARM_DMA1C_STATUS (0x54) -#define NETARM_DMA1D_BFR_DESCRPTOR_PTR (0x60) -#define NETARM_DMA1D_CONTROL (0x70) -#define NETARM_DMA1D_STATUS (0x74) - -#define NETARM_DMA2_BFR_DESCRPTOR_PTR (0x80) -#define NETARM_DMA2_CONTROL (0x90) -#define NETARM_DMA2_STATUS (0x94) - -#define NETARM_DMA3_BFR_DESCRPTOR_PTR (0xA0) -#define NETARM_DMA3_CONTROL (0xB0) -#define NETARM_DMA3_STATUS (0xB4) - -#define NETARM_DMA4_BFR_DESCRPTOR_PTR (0xC0) -#define NETARM_DMA4_CONTROL (0xD0) -#define NETARM_DMA4_STATUS (0xD4) - -#define NETARM_DMA5_BFR_DESCRPTOR_PTR (0xE0) -#define NETARM_DMA5_CONTROL (0xF0) -#define NETARM_DMA5_STATUS (0xF4) - -#define NETARM_DMA6_BFR_DESCRPTOR_PTR (0x100) -#define NETARM_DMA6_CONTROL (0x110) -#define NETARM_DMA6_STATUS (0x114) - -#define NETARM_DMA7_BFR_DESCRPTOR_PTR (0x120) -#define NETARM_DMA7_CONTROL (0x130) -#define NETARM_DMA7_STATUS (0x134) - -#define NETARM_DMA8_BFR_DESCRPTOR_PTR (0x140) -#define NETARM_DMA8_CONTROL (0x150) -#define NETARM_DMA8_STATUS (0x154) - -#define NETARM_DMA9_BFR_DESCRPTOR_PTR (0x160) -#define NETARM_DMA9_CONTROL (0x170) -#define NETARM_DMA9_STATUS (0x174) - -#define NETARM_DMA10_BFR_DESCRPTOR_PTR (0x180) -#define NETARM_DMA10_CONTROL (0x190) -#define NETARM_DMA10_STATUS (0x194) - -/* select bitfield defintions */ - -/* DMA Control Register ( 0xFF90_0XX0 ) */ - -#define NETARM_DMA_CTL_ENABLE (0x80000000) - -#define NETARM_DMA_CTL_ABORT (0x40000000) - -#define NETARM_DMA_CTL_BUS_100_PERCENT (0x00000000) -#define NETARM_DMA_CTL_BUS_75_PERCENT (0x10000000) -#define NETARM_DMA_CTL_BUS_50_PERCENT (0x20000000) -#define NETARM_DMA_CTL_BUS_25_PERCENT (0x30000000) - -#define NETARM_DMA_CTL_BUS_MASK (0x30000000) - -#define NETARM_DMA_CTL_MODE_FB_TO_MEM (0x00000000) -#define NETARM_DMA_CTL_MODE_FB_FROM_MEM (0x04000000) -#define NETARM_DMA_CTL_MODE_MEM_TO_MEM (0x08000000) - -#define NETARM_DMA_CTL_BURST_NONE (0x00000000) -#define NETARM_DMA_CTL_BURST_8_BYTE (0x01000000) -#define NETARM_DMA_CTL_BURST_16_BYTE (0x02000000) - -#define NETARM_DMA_CTL_BURST_MASK (0x03000000) - -#define NETARM_DMA_CTL_SRC_INCREMENT (0x00200000) - -#define NETARM_DMA_CTL_DST_INCREMENT (0x00100000) - -/* these apply only to ext xfers on DMA 3 or 4 */ - -#define NETARM_DMA_CTL_CH_3_4_REQ_EXT (0x00800000) - -#define NETARM_DMA_CTL_CH_3_4_DATA_32 (0x00000000) -#define NETARM_DMA_CTL_CH_3_4_DATA_16 (0x00010000) -#define NETARM_DMA_CTL_CH_3_4_DATA_8 (0x00020000) - -#define NETARM_DMA_CTL_STATE(X) ((X) & 0xFC00) -#define NETARM_DMA_CTL_INDEX(X) ((X) & 0x03FF) - -/* DMA Status Register ( 0xFF90_0XX4 ) */ - -#define NETARM_DMA_STAT_NC_INTPEN (0x80000000) -#define NETARM_DMA_STAT_EC_INTPEN (0x40000000) -#define NETARM_DMA_STAT_NR_INTPEN (0x20000000) -#define NETARM_DMA_STAT_CA_INTPEN (0x10000000) -#define NETARM_DMA_STAT_INTPEN_MASK (0xF0000000) - -#define NETARM_DMA_STAT_NC_INT_EN (0x00800000) -#define NETARM_DMA_STAT_EC_INT_EN (0x00400000) -#define NETARM_DMA_STAT_NR_INT_EN (0x00200000) -#define NETARM_DMA_STAT_CA_INT_EN (0x00100000) -#define NETARM_DMA_STAT_INT_EN_MASK (0x00F00000) - -#define NETARM_DMA_STAT_WRAP (0x00080000) -#define NETARM_DMA_STAT_IDONE (0x00040000) -#define NETARM_DMA_STAT_LAST (0x00020000) -#define NETARM_DMA_STAT_FULL (0x00010000) - -#define NETARM_DMA_STAT_BUFLEN(X) ((X) & 0x7FFF) - -/* DMA Buffer Descriptor Word 0 bitfields. */ - -#define NETARM_DMA_BD0_WRAP (0x80000000) -#define NETARM_DMA_BD0_IDONE (0x40000000) -#define NETARM_DMA_BD0_LAST (0x20000000) -#define NETARM_DMA_BD0_BUFPTR_MASK (0x1FFFFFFF) - -/* DMA Buffer Descriptor Word 1 bitfields. */ - -#define NETARM_DMA_BD1_STATUS_MASK (0xFFFF0000) -#define NETARM_DMA_BD1_FULL (0x00008000) -#define NETARM_DMA_BD1_BUFLEN_MASK (0x00007FFF) - -#ifndef __ASSEMBLER__ - -typedef struct __NETARM_DMA_Buff_Desc_FlyBy -{ - unsigned int word0; - unsigned int word1; -} NETARM_DMA_Buff_Desc_FlyBy, *pNETARM_DMA_Buff_Desc_FlyBy ; - -typedef struct __NETARM_DMA_Buff_Desc_M_to_M -{ - unsigned int word0; - unsigned int word1; - unsigned int word2; - unsigned int word3; -} NETARM_DMA_Buff_Desc_M_to_M, *pNETARM_DMA_Buff_Desc_M_to_M ; - -#endif - -#endif diff --git a/arch/arm/include/asm/arch-arm720t/netarm_eni_module.h b/arch/arm/include/asm/arch-arm720t/netarm_eni_module.h deleted file mode 100644 index 317b354513..0000000000 --- a/arch/arm/include/asm/arch-arm720t/netarm_eni_module.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * include/asm-armnommu/arch-netarm/netarm_eni_module.h - * - * Copyright (C) 2000 NETsilicon, Inc. - * Copyright (C) 2000 WireSpeed Communications Corporation - * - * This software is copyrighted by WireSpeed. LICENSEE agrees that - * it will not delete this copyright notice, trademarks or protective - * notices from any copy made by LICENSEE. - * - * This software is provided "AS-IS" and any express or implied - * warranties or conditions, including but not limited to any - * implied warranties of merchantability and fitness for a particular - * purpose regarding this software. In no event shall WireSpeed - * be liable for any indirect, consequential, or incidental damages, - * loss of profits or revenue, loss of use or data, or interruption - * of business, whether the alleged damages are labeled in contract, - * tort, or indemnity. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * author(s) : David Smith - */ - -#ifndef __NETARM_ENI_MODULE_REGISTERS_H -#define __NETARM_ENI_MODULE_REGISTERS_H - -/* ENI unit register offsets */ - -/* #ifdef CONFIG_ARCH_NETARM */ -#define NETARM_ENI_MODULE_BASE (0xFFA00000) -/* #endif / * CONFIG_ARCH_NETARM */ - -#define get_eni_reg_addr(c) ((volatile unsigned int *)(NETARM_ENI_MODULE_BASE + (c))) -#define get_eni_ctl_reg_addr(minor) \ - (get_eni_reg_addr(NETARM_ENI_1284_PORT1_CONTROL) + (minor)) - -#define NETARM_ENI_GENERAL_CONTROL (0x00) -#define NETARM_ENI_STATUS_CONTROL (0x04) -#define NETARM_ENI_FIFO_MODE_DATA (0x08) - -#define NETARM_ENI_1284_PORT1_CONTROL (0x10) -#define NETARM_ENI_1284_PORT2_CONTROL (0x14) -#define NETARM_ENI_1284_PORT3_CONTROL (0x18) -#define NETARM_ENI_1284_PORT4_CONTROL (0x1c) - -#define NETARM_ENI_1284_CHANNEL1_DATA (0x20) -#define NETARM_ENI_1284_CHANNEL2_DATA (0x24) -#define NETARM_ENI_1284_CHANNEL3_DATA (0x28) -#define NETARM_ENI_1284_CHANNEL4_DATA (0x2c) - -#define NETARM_ENI_ENI_CONTROL (0x30) -#define NETARM_ENI_ENI_PULSED_INTR (0x34) -#define NETARM_ENI_ENI_SHARED_RAM_ADDR (0x38) -#define NETARM_ENI_ENI_SHARED (0x3c) - -/* select bitfield defintions */ - -/* General Control Register (0xFFA0_0000) */ - -#define NETARM_ENI_GCR_ENIMODE_IEEE1284 (0x00000001) -#define NETARM_ENI_GCR_ENIMODE_SHRAM16 (0x00000004) -#define NETARM_ENI_GCR_ENIMODE_SHRAM8 (0x00000005) -#define NETARM_ENI_GCR_ENIMODE_FIFO16 (0x00000006) -#define NETARM_ENI_GCR_ENIMODE_FIFO8 (0x00000007) - -#define NETARM_ENI_GCR_ENIMODE_MASK (0x00000007) - -/* IEEE 1284 Port Control Registers 1-4 (0xFFA0_0010, 0xFFA0_0014, - 0xFFA0_0018, 0xFFA0_001c) */ - -#define NETARM_ENI_1284PC_PORT_ENABLE (0x80000000) -#define NETARM_ENI_1284PC_DMA_ENABLE (0x40000000) -#define NETARM_ENI_1284PC_OBE_INT_EN (0x20000000) -#define NETARM_ENI_1284PC_ACK_INT_EN (0x10000000) -#define NETARM_ENI_1284PC_ECP_MODE (0x08000000) -#define NETARM_ENI_1284PC_LOOPBACK_MODE (0x04000000) - -#define NETARM_ENI_1284PC_STROBE_TIME0 (0x00000000) /* 0.5 uS */ -#define NETARM_ENI_1284PC_STROBE_TIME1 (0x01000000) /* 1.0 uS */ -#define NETARM_ENI_1284PC_STROBE_TIME2 (0x02000000) /* 5.0 uS */ -#define NETARM_ENI_1284PC_STROBE_TIME3 (0x03000000) /* 10.0 uS */ -#define NETARM_ENI_1284PC_STROBE_MASK (0x03000000) - -#define NETARM_ENI_1284PC_MAN_STROBE_EN (0x00800000) -#define NETARM_ENI_1284PC_FAST_MODE (0x00400000) -#define NETARM_ENI_1284PC_BIDIR_MODE (0x00200000) - -#define NETARM_ENI_1284PC_MAN_STROBE (0x00080000) -#define NETARM_ENI_1284PC_AUTO_FEED (0x00040000) -#define NETARM_ENI_1284PC_INIT (0x00020000) -#define NETARM_ENI_1284PC_HSELECT (0x00010000) -#define NETARM_ENI_1284PC_FE_INT_EN (0x00008000) -#define NETARM_ENI_1284PC_EPP_MODE (0x00004000) -#define NETARM_ENI_1284PC_IBR_INT_EN (0x00002000) -#define NETARM_ENI_1284PC_IBR (0x00001000) - -#define NETARM_ENI_1284PC_RXFDB_1BYTE (0x00000400) -#define NETARM_ENI_1284PC_RXFDB_2BYTE (0x00000800) -#define NETARM_ENI_1284PC_RXFDB_3BYTE (0x00000c00) -#define NETARM_ENI_1284PC_RXFDB_4BYTE (0x00000000) - -#define NETARM_ENI_1284PC_RBCC (0x00000200) -#define NETARM_ENI_1284PC_RBCT (0x00000100) -#define NETARM_ENI_1284PC_ACK (0x00000080) -#define NETARM_ENI_1284PC_FIFO_E (0x00000040) -#define NETARM_ENI_1284PC_OBE (0x00000020) -#define NETARM_ENI_1284PC_ACK_INT (0x00000010) -#define NETARM_ENI_1284PC_BUSY (0x00000008) -#define NETARM_ENI_1284PC_PE (0x00000004) -#define NETARM_ENI_1284PC_PSELECT (0x00000002) -#define NETARM_ENI_1284PC_FAULT (0x00000001) - -#endif /* __NETARM_ENI_MODULE_REGISTERS_H */ diff --git a/arch/arm/include/asm/arch-arm720t/netarm_eth_module.h b/arch/arm/include/asm/arch-arm720t/netarm_eth_module.h deleted file mode 100644 index 8f2f36981a..0000000000 --- a/arch/arm/include/asm/arch-arm720t/netarm_eth_module.h +++ /dev/null @@ -1,160 +0,0 @@ -/* - * include/asm-armnommu/arch-netarm/netarm_eth_module.h - * - * Copyright (C) 2000 NETsilicon, Inc. - * Copyright (C) 2000 WireSpeed Communications Corporation - * - * This software is copyrighted by WireSpeed. LICENSEE agrees that - * it will not delete this copyright notice, trademarks or protective - * notices from any copy made by LICENSEE. - * - * This software is provided "AS-IS" and any express or implied - * warranties or conditions, including but not limited to any - * implied warranties of merchantability and fitness for a particular - * purpose regarding this software. In no event shall WireSpeed - * be liable for any indirect, consequential, or incidental damages, - * loss of profits or revenue, loss of use or data, or interruption - * of business, whether the alleged damages are labeled in contract, - * tort, or indemnity. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * author(s) : Jackie Smith Cashion - * David Smith - */ - -#ifndef __NETARM_ETH_MODULE_REGISTERS_H -#define __NETARM_ETH_MODULE_REGISTERS_H - -/* ETH unit register offsets */ - -#define NETARM_ETH_MODULE_BASE (0xFF800000) - -#define get_eth_reg_addr(c) ((volatile unsigned int *)(NETARM_ETH_MODULE_BASE + (c))) - -#define NETARM_ETH_GEN_CTRL (0x000) /* Ethernet Gen Control Reg */ -#define NETARM_ETH_GEN_STAT (0x004) /* Ethernet Gen Status Reg */ -#define NETARM_ETH_FIFO_DAT1 (0x008) /* Fifo Data Reg 1 */ -#define NETARM_ETH_FIFO_DAT2 (0x00C) /* Fifo Data Reg 2 */ -#define NETARM_ETH_TX_STAT (0x010) /* Transmit Status Reg */ -#define NETARM_ETH_RX_STAT (0x014) /* Receive Status Reg */ - -#define NETARM_ETH_MAC_CFG (0x400) /* MAC Configuration Reg */ -#define NETARM_ETH_PCS_CFG (0x408) /* PCS Configuration Reg */ -#define NETARM_ETH_STL_CFG (0x410) /* STL Configuration Reg */ -#define NETARM_ETH_B2B_IPG_GAP_TMR (0x440) /* Back-to-back IPG - Gap Timer Reg */ -#define NETARM_ETH_NB2B_IPG_GAP_TMR (0x444) /* Non Back-to-back - IPG Gap Timer Reg */ -#define NETARM_ETH_MII_CMD (0x540) /* MII (PHY) Command Reg */ -#define NETARM_ETH_MII_ADDR (0x544) /* MII Address Reg */ -#define NETARM_ETH_MII_WRITE (0x548) /* MII Write Data Reg */ -#define NETARM_ETH_MII_READ (0x54C) /* MII Read Data Reg */ -#define NETARM_ETH_MII_IND (0x550) /* MII Indicators Reg */ -#define NETARM_ETH_MIB_CRCEC (0x580) /* (MIB) CRC Error Counter */ -#define NETARM_ETH_MIB_AEC (0x584) /* Alignment Error Counter */ -#define NETARM_ETH_MIB_CEC (0x588) /* Code Error Counter */ -#define NETARM_ETH_MIB_LFC (0x58C) /* Long Frame Counter */ -#define NETARM_ETH_MIB_SFC (0x590) /* Short Frame Counter */ -#define NETARM_ETH_MIB_LCC (0x594) /* Late Collision Counter */ -#define NETARM_ETH_MIB_EDC (0x598) /* Excessive Deferral - Counter */ -#define NETARM_ETH_MIB_MCC (0x59C) /* Maximum Collision Counter */ -#define NETARM_ETH_SAL_FILTER (0x5C0) /* SAL Station Address - Filter Reg */ -#define NETARM_ETH_SAL_STATION_ADDR_1 (0x5C4) /* SAL Station Address - Reg */ -#define NETARM_ETH_SAL_STATION_ADDR_2 (0x5C8) -#define NETARM_ETH_SAL_STATION_ADDR_3 (0x5CC) -#define NETARM_ETH_SAL_HASH_TBL_1 (0x5D0) /* SAL Multicast Hash Table*/ -#define NETARM_ETH_SAL_HASH_TBL_2 (0x5D4) -#define NETARM_ETH_SAL_HASH_TBL_3 (0x5D8) -#define NETARM_ETH_SAL_HASH_TBL_4 (0x5DC) - -/* select bitfield defintions */ - -/* Ethernet General Control Register (0xFF80_0000) */ - -#define NETARM_ETH_GCR_ERX (0x80000000) /* Enable Receive FIFO */ -#define NETARM_ETH_GCR_ERXDMA (0x40000000) /* Enable Receive DMA */ -#define NETARM_ETH_GCR_ETX (0x00800000) /* Enable Transmit FIFO */ -#define NETARM_ETH_GCR_ETXDMA (0x00400000) /* Enable Transmit DMA */ -#define NETARM_ETH_GCR_ETXWM_50 (0x00100000) /* Transmit FIFO Water - Mark. Start transmit - when FIFO is 50% - full. */ -#define NETARM_ETH_GCR_PNA (0x00000400) /* pSOS pNA Buffer - Descriptor Format */ - -/* Ethernet General Status Register (0xFF80_0004) */ - -#define NETARM_ETH_GST_RXFDB (0x30000000) -#define NETARM_ETH_GST_RXREGR (0x08000000) /* Receive Register - Ready */ -#define NETARM_ETH_GST_RXFIFOH (0x04000000) -#define NETARM_ETH_GST_RXBR (0x02000000) -#define NETARM_ETH_GST_RXSKIP (0x01000000) - -#define NETARM_ETH_GST_TXBC (0x00020000) - - -/* Ethernet Transmit Status Register (0xFF80_0010) */ - -#define NETARM_ETH_TXSTAT_TXOK (0x00008000) - - -/* Ethernet Receive Status Register (0xFF80_0014) */ - -#define NETARM_ETH_RXSTAT_SIZE (0xFFFF0000) -#define NETARM_ETH_RXSTAT_RXOK (0x00002000) - - -/* PCS Configuration Register (0xFF80_0408) */ - -#define NETARM_ETH_PCSC_NOCFR (0x1) /* Disable Ciphering */ -#define NETARM_ETH_PCSC_ENJAB (0x2) /* Enable Jabber Protection */ -#define NETARM_ETH_PCSC_CLKS_25M (0x0) /* 25 MHz Clock Speed Select */ -#define NETARM_ETH_PCSC_CLKS_33M (0x4) /* 33 MHz Clock Speed Select */ - -/* STL Configuration Register (0xFF80_0410) */ - -#define NETARM_ETH_STLC_RXEN (0x2) /* Enable Packet Receiver */ -#define NETARM_ETH_STLC_AUTOZ (0x4) /* Auto Zero Statistics */ - -/* MAC Configuration Register (0xFF80_0400) */ - -#define NETARM_ETH_MACC_HUGEN (0x1) /* Enable Unlimited Transmit - Frame Sizes */ -#define NETARM_ETH_MACC_PADEN (0x4) /* Automatic Pad Fill Frames - to 64 Bytes */ -#define NETARM_ETH_MACC_CRCEN (0x8) /* Append CRC to Transmit - Frames */ - -/* MII (PHY) Command Register (0xFF80_0540) */ - -#define NETARM_ETH_MIIC_RSTAT (0x1) /* Single Scan for Read Data */ - -/* MII Indicators Register (0xFF80_0550) */ - -#define NETARM_ETH_MIII_BUSY (0x1) /* MII I/F Busy with - Read/Write */ - -/* SAL Station Address Filter Register (0xFF80_05C0) */ - -#define NETARM_ETH_SALF_PRO (0x8) /* Enable Promiscuous Mode */ -#define NETARM_ETH_SALF_PRM (0x4) /* Accept All Multicast - Packets */ -#define NETARM_ETH_SALF_PRA (0x2) /* Accept Mulitcast Packets - using Hash Table */ -#define NETARM_ETH_SALF_BROAD (0x1) /* Accept All Broadcast - Packets */ - - -#endif /* __NETARM_GEN_MODULE_REGISTERS_H */ diff --git a/arch/arm/include/asm/arch-arm720t/netarm_gen_module.h b/arch/arm/include/asm/arch-arm720t/netarm_gen_module.h deleted file mode 100644 index 13656a3ad2..0000000000 --- a/arch/arm/include/asm/arch-arm720t/netarm_gen_module.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * include/asm-armnommu/arch-netarm/netarm_gen_module.h - * - * Copyright (C) 2005 - * Art Shipkowski, Videon Central, Inc., <art@videon-central.com> - * - * Copyright (C) 2000, 2001 NETsilicon, Inc. - * Copyright (C) 2000, 2001 Red Hat, Inc. - * - * This software is copyrighted by Red Hat. LICENSEE agrees that - * it will not delete this copyright notice, trademarks or protective - * notices from any copy made by LICENSEE. - * - * This software is provided "AS-IS" and any express or implied - * warranties or conditions, including but not limited to any - * implied warranties of merchantability and fitness for a particular - * purpose regarding this software. In no event shall Red Hat - * be liable for any indirect, consequential, or incidental damages, - * loss of profits or revenue, loss of use or data, or interruption - * of business, whether the alleged damages are labeled in contract, - * tort, or indemnity. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * author(s) : Joe deBlaquiere - * - * Modified to support NS7520 by Art Shipkowski. - */ - -#ifndef __NETARM_GEN_MODULE_REGISTERS_H -#define __NETARM_GEN_MODULE_REGISTERS_H - -/* GEN unit register offsets */ - -#define NETARM_GEN_MODULE_BASE (0xFFB00000) - -#define get_gen_reg_addr(c) ((volatile unsigned int *)(NETARM_GEN_MODULE_BASE + (c))) - -#define NETARM_GEN_SYSTEM_CONTROL (0x00) -#define NETARM_GEN_STATUS_CONTROL (0x04) -#define NETARM_GEN_PLL_CONTROL (0x08) -#define NETARM_GEN_SOFTWARE_SERVICE (0x0c) - -#define NETARM_GEN_TIMER1_CONTROL (0x10) -#define NETARM_GEN_TIMER1_STATUS (0x14) -#define NETARM_GEN_TIMER2_CONTROL (0x18) -#define NETARM_GEN_TIMER2_STATUS (0x1c) - -#define NETARM_GEN_PORTA (0x20) -#ifndef CONFIG_NETARM_NS7520 -#define NETARM_GEN_PORTB (0x24) -#endif -#define NETARM_GEN_PORTC (0x28) - -#define NETARM_GEN_INTR_ENABLE (0x30) -#define NETARM_GEN_INTR_ENABLE_SET (0x34) -#define NETARM_GEN_INTR_ENABLE_CLR (0x38) -#define NETARM_GEN_INTR_STATUS_EN (0x34) -#define NETARM_GEN_INTR_STATUS_RAW (0x38) - -#define NETARM_GEN_CACHE_CONTROL1 (0x40) -#define NETARM_GEN_CACHE_CONTROL2 (0x44) - -/* select bitfield definitions */ - -/* System Control Register ( 0xFFB0_0000 ) */ - -#define NETARM_GEN_SYS_CFG_LENDIAN (0x80000000) -#define NETARM_GEN_SYS_CFG_BENDIAN (0x00000000) - -#define NETARM_GEN_SYS_CFG_BUSQRTR (0x00000000) -#define NETARM_GEN_SYS_CFG_BUSHALF (0x20000000) -#define NETARM_GEN_SYS_CFG_BUSFULL (0x40000000) - -#define NETARM_GEN_SYS_CFG_BCLK_DISABLE (0x10000000) - -#define NETARM_GEN_SYS_CFG_WDOG_EN (0x01000000) -#define NETARM_GEN_SYS_CFG_WDOG_IRQ (0x00000000) -#define NETARM_GEN_SYS_CFG_WDOG_FIQ (0x00400000) -#define NETARM_GEN_SYS_CFG_WDOG_RST (0x00800000) -#define NETARM_GEN_SYS_CFG_WDOG_24 (0x00000000) -#define NETARM_GEN_SYS_CFG_WDOG_26 (0x00100000) -#define NETARM_GEN_SYS_CFG_WDOG_28 (0x00200000) -#define NETARM_GEN_SYS_CFG_WDOG_29 (0x00300000) - -#define NETARM_GEN_SYS_CFG_BUSMON_EN (0x00040000) -#define NETARM_GEN_SYS_CFG_BUSMON_128 (0x00000000) -#define NETARM_GEN_SYS_CFG_BUSMON_64 (0x00010000) -#define NETARM_GEN_SYS_CFG_BUSMON_32 (0x00020000) -#define NETARM_GEN_SYS_CFG_BUSMON_16 (0x00030000) - -#define NETARM_GEN_SYS_CFG_USER_EN (0x00008000) -#define NETARM_GEN_SYS_CFG_BUSER_EN (0x00004000) - -#define NETARM_GEN_SYS_CFG_BUSARB_INT (0x00002000) -#define NETARM_GEN_SYS_CFG_BUSARB_EXT (0x00000000) - -#define NETARM_GEN_SYS_CFG_DMATST (0x00001000) - -#define NETARM_GEN_SYS_CFG_TEALAST (0x00000800) - -#define NETARM_GEN_SYS_CFG_ALIGN_ABORT (0x00000400) - -#define NETARM_GEN_SYS_CFG_CACHE_EN (0x00000200) - -#define NETARM_GEN_SYS_CFG_WRI_BUF_EN (0x00000100) - -#define NETARM_GEN_SYS_CFG_CACHE_INIT (0x00000080) - -/* PLL Control Register ( 0xFFB0_0008 ) */ - -#define NETARM_GEN_PLL_CTL_PLLCNT_MASK (0x0F000000) - -#define NETARM_GEN_PLL_CTL_PLLCNT(x) (((x)<<24) & \ - NETARM_GEN_PLL_CTL_PLLCNT_MASK) - -/* Defaults for POLTST and ICP Fields in PLL CTL */ -#define NETARM_GEN_PLL_CTL_OUTDIV(x) (x) -#define NETARM_GEN_PLL_CTL_INDIV(x) ((x)<<6) -#define NETARM_GEN_PLL_CTL_POLTST_DEF (0x00000E00) -#define NETARM_GEN_PLL_CTL_ICP_DEF (0x0000003C) - - -/* Software Service Register ( 0xFFB0_000C ) */ - -#define NETARM_GEN_SW_SVC_RESETA (0x123) -#define NETARM_GEN_SW_SVC_RESETB (0x321) - -/* PORT C Register ( 0xFFB0_0028 ) */ - -#ifndef CONFIG_NETARM_NS7520 -#define NETARM_GEN_PORT_MODE(x) (((x)<<24) + (0xFF00)) -#define NETARM_GEN_PORT_DIR(x) (((x)<<16) + (0xFF00)) -#else -#define NETARM_GEN_PORT_MODE(x) ((x)<<24) -#define NETARM_GEN_PORT_DIR(x) ((x)<<16) -#define NETARM_GEN_PORT_CSF(x) ((x)<<8) -#endif - -/* Timer Registers ( 0xFFB0_0010 0xFFB0_0018 ) */ - -#define NETARM_GEN_TCTL_ENABLE (0x80000000) -#define NETARM_GEN_TCTL_INT_ENABLE (0x40000000) - -#define NETARM_GEN_TCTL_USE_IRQ (0x00000000) -#define NETARM_GEN_TCTL_USE_FIQ (0x20000000) - -#define NETARM_GEN_TCTL_USE_PRESCALE (0x10000000) -#define NETARM_GEN_TCTL_INIT_COUNT(x) ((x) & 0x1FF) - -#define NETARM_GEN_TSTAT_INTPEN (0x40000000) -#if ~defined(CONFIG_NETARM_NS7520) -#define NETARM_GEN_TSTAT_CTC_MASK (0x000001FF) -#else -#define NETARM_GEN_TSTAT_CTC_MASK (0x0FFFFFFF) -#endif - -/* prescale to msecs conversion */ - -#if !defined(CONFIG_NETARM_PLL_BYPASS) -#define NETARM_GEN_TIMER_MSEC_P(x) ( ( ( 20480 ) * ( 0x1FF - ( (x) & \ - NETARM_GEN_TSTAT_CTC_MASK ) + \ - 1 ) ) / (NETARM_XTAL_FREQ/1000) ) - -#define NETARM_GEN_TIMER_SET_HZ(x) ( ( ((NETARM_XTAL_FREQ/(20480*(x)))-1) & \ - NETARM_GEN_TSTAT_CTC_MASK ) | \ - NETARM_GEN_TCTL_USE_PRESCALE ) - -#else -#define NETARM_GEN_TIMER_MSEC_P(x) ( ( ( 4096 ) * ( 0x1FF - ( (x) & \ - NETARM_GEN_TSTAT_CTC_MASK ) + \ - 1 ) ) / (NETARM_XTAL_FREQ/1000) ) - -#define NETARM_GEN_TIMER_SET_HZ(x) ( ( ((NETARM_XTAL_FREQ/(4096*(x)))-1) & \ - NETARM_GEN_TSTAT_CTC_MASK ) | \ - NETARM_GEN_TCTL_USE_PRESCALE ) -#endif - -#endif diff --git a/arch/arm/include/asm/arch-arm720t/netarm_mem_module.h b/arch/arm/include/asm/arch-arm720t/netarm_mem_module.h deleted file mode 100644 index c650c3b004..0000000000 --- a/arch/arm/include/asm/arch-arm720t/netarm_mem_module.h +++ /dev/null @@ -1,184 +0,0 @@ -/* - * include/asm-armnommu/arch-netarm/netarm_mem_module.h - * - * Copyright (C) 2005 - * Art Shipkowski, Videon Central, Inc., <art@videon-central.com> - * - * Copyright (C) 2000, 2001 NETsilicon, Inc. - * Copyright (C) 2000, 2001 Red Hat, Inc. - * - * This software is copyrighted by Red Hat. LICENSEE agrees that - * it will not delete this copyright notice, trademarks or protective - * notices from any copy made by LICENSEE. - * - * This software is provided "AS-IS" and any express or implied - * warranties or conditions, including but not limited to any - * implied warranties of merchantability and fitness for a particular - * purpose regarding this software. In no event shall Red Hat - * be liable for any indirect, consequential, or incidental damages, - * loss of profits or revenue, loss of use or data, or interruption - * of business, whether the alleged damages are labeled in contract, - * tort, or indemnity. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * author(s) : Joe deBlaquiere - * - * Modified to support NS7520 by Art Shipkowski. - */ - -#ifndef __NETARM_MEM_MODULE_REGISTERS_H -#define __NETARM_MEM_MODULE_REGISTERS_H - -/* GEN unit register offsets */ - -#define NETARM_MEM_MODULE_BASE (0xFFC00000) - -#define NETARM_MEM_MODULE_CONFIG (0x00) -#define NETARM_MEM_CS0_BASE_ADDR (0x10) -#define NETARM_MEM_CS0_OPTIONS (0x14) -#define NETARM_MEM_CS1_BASE_ADDR (0x20) -#define NETARM_MEM_CS1_OPTIONS (0x24) -#define NETARM_MEM_CS2_BASE_ADDR (0x30) -#define NETARM_MEM_CS2_OPTIONS (0x34) -#define NETARM_MEM_CS3_BASE_ADDR (0x40) -#define NETARM_MEM_CS3_OPTIONS (0x44) -#define NETARM_MEM_CS4_BASE_ADDR (0x50) -#define NETARM_MEM_CS4_OPTIONS (0x54) - -/* select bitfield defintions */ - -/* Module Configuration Register ( 0xFFC0_0000 ) */ - -#define NETARM_MEM_CFG_REFR_COUNT_MASK (0xFF000000) -#define NETARM_MEM_CFG_REFRESH_EN (0x00800000) - -#define NETARM_MEM_CFG_REFR_CYCLE_8CLKS (0x00000000) -#define NETARM_MEM_CFG_REFR_CYCLE_6CLKS (0x00200000) -#define NETARM_MEM_CFG_REFR_CYCLE_5CLKS (0x00400000) -#define NETARM_MEM_CFG_REFR_CYCLE_4CLKS (0x00600000) - -#define NETARM_MEM_CFG_PORTC_AMUX (0x00100000) - -#define NETARM_MEM_CFG_A27_ADDR (0x00080000) -#define NETARM_MEM_CFG_A27_CS0OE (0x00000000) - -#define NETARM_MEM_CFG_A26_ADDR (0x00040000) -#define NETARM_MEM_CFG_A26_CS0WE (0x00000000) - -#define NETARM_MEM_CFG_A25_ADDR (0x00020000) -#define NETARM_MEM_CFG_A25_BLAST (0x00000000) - -#define NETARM_MEM_CFG_PORTC_AMUX2 (0x00010000) - - -/* range on this period is about 1 to 275 usec (with 18.432MHz clock) */ -/* the expression will round down, so make sure to reverse it to verify */ -/* it is what you want. period = [( count + 1 ) * 20] / Fcrystal */ -/* (note: Fxtal = Fcrystal/5, see HWRefGuide sections 8.2.5 and 11.3.2) */ - -#define NETARM_MEM_REFR_PERIOD_USEC(p) (NETARM_MEM_CFG_REFR_COUNT_MASK & \ - (((((NETARM_XTAL_FREQ/(1000))*p)/(20000) \ - ) - (1) ) << (24))) - -#if 0 -/* range on this period is about 1 to 275 usec (with 18.432MHz clock) */ -/* the expression will round down, so make sure to reverse it toverify */ -/* it is what you want. period = [( count + 1 ) * 4] / Fxtal */ - -#define NETARM_MEM_REFR_PERIOD_USEC(p) (NETARM_MEM_CFG_REFR_COUNT_MASK & \ - (((((NETARM_XTAL_FREQ/(1000))*p)/(4000) \ - ) - (1) ) << (24))) -#endif - -/* Base Address Registers (0xFFC0_00X0) */ - -#define NETARM_MEM_BAR_BASE_MASK (0xFFFFF000) - -/* macro to define base */ - -#define NETARM_MEM_BAR_BASE(x) ((x) & NETARM_MEM_BAR_BASE_MASK) - -#define NETARM_MEM_BAR_DRAM_FP (0x00000000) -#define NETARM_MEM_BAR_DRAM_EDO (0x00000100) -#define NETARM_MEM_BAR_DRAM_SYNC (0x00000200) - -#define NETARM_MEM_BAR_DRAM_MUX_INT (0x00000000) -#define NETARM_MEM_BAR_DRAM_MUX_EXT (0x00000080) - -#define NETARM_MEM_BAR_DRAM_MUX_BAL (0x00000000) -#define NETARM_MEM_BAR_DRAM_MUX_UNBAL (0x00000020) - -#define NETARM_MEM_BAR_1BCLK_IDLE (0x00000010) - -#define NETARM_MEM_BAR_DRAM_SEL (0x00000008) - -#define NETARM_MEM_BAR_BURST_EN (0x00000004) - -#define NETARM_MEM_BAR_WRT_PROT (0x00000002) - -#define NETARM_MEM_BAR_VALID (0x00000001) - -/* Option Registers (0xFFC0_00X4) */ - -/* macro to define which bits of the base are significant */ - -#define NETARM_MEM_OPT_BASE_USE(x) ((x) & NETARM_MEM_BAR_BASE_MASK) - -#define NETARM_MEM_OPT_WAIT_MASK (0x00000F00) - -#define NETARM_MEM_OPT_WAIT_STATES(x) (((x) << 8 ) & NETARM_MEM_OPT_WAIT_MASK ) - -#define NETARM_MEM_OPT_BCYC_1 (0x00000000) -#define NETARM_MEM_OPT_BCYC_2 (0x00000040) -#define NETARM_MEM_OPT_BCYC_3 (0x00000080) -#define NETARM_MEM_OPT_BCYC_4 (0x000000C0) - -#define NETARM_MEM_OPT_BSIZE_2 (0x00000000) -#define NETARM_MEM_OPT_BSIZE_4 (0x00000010) -#define NETARM_MEM_OPT_BSIZE_8 (0x00000020) -#define NETARM_MEM_OPT_BSIZE_16 (0x00000030) - -#define NETARM_MEM_OPT_32BIT (0x00000000) -#define NETARM_MEM_OPT_16BIT (0x00000004) -#define NETARM_MEM_OPT_8BIT (0x00000008) -#define NETARM_MEM_OPT_32BIT_EXT_ACK (0x0000000C) - -#define NETARM_MEM_OPT_BUS_SIZE_MASK (0x0000000C) - -#define NETARM_MEM_OPT_READ_ASYNC (0x00000000) -#define NETARM_MEM_OPT_READ_SYNC (0x00000002) - -#define NETARM_MEM_OPT_WRITE_ASYNC (0x00000000) -#define NETARM_MEM_OPT_WRITE_SYNC (0x00000001) - -#ifdef CONFIG_NETARM_NS7520 -/* The NS7520 has a second options register for each chip select */ -#define NETARM_MEM_CS0_OPTIONS_B (0x18) -#define NETARM_MEM_CS1_OPTIONS_B (0x28) -#define NETARM_MEM_CS2_OPTIONS_B (0x38) -#define NETARM_MEM_CS3_OPTIONS_B (0x48) -#define NETARM_MEM_CS4_OPTIONS_B (0x58) - -/* Option B Registers (0xFFC0_00x8) */ -#define NETARM_MEM_OPTB_SYNC_1_STAGE (0x00000001) -#define NETARM_MEM_OPTB_SYNC_2_STAGE (0x00000002) -#define NETARM_MEM_OPTB_BCYC_PLUS0 (0x00000000) -#define NETARM_MEM_OPTB_BCYC_PLUS4 (0x00000004) -#define NETARM_MEM_OPTB_BCYC_PLUS8 (0x00000008) -#define NETARM_MEM_OPTB_BCYC_PLUS12 (0x0000000C) - -#define NETARM_MEM_OPTB_WAIT_PLUS0 (0x00000000) -#define NETARM_MEM_OPTB_WAIT_PLUS16 (0x00000010) -#define NETARM_MEM_OPTB_WAIT_PLUS32 (0x00000020) -#define NETARM_MEM_OPTB_WAIT_PLUS48 (0x00000030) -#endif - -#endif diff --git a/arch/arm/include/asm/arch-arm720t/netarm_registers.h b/arch/arm/include/asm/arch-arm720t/netarm_registers.h deleted file mode 100644 index fa8812879a..0000000000 --- a/arch/arm/include/asm/arch-arm720t/netarm_registers.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * linux/include/asm-arm/arch-netarm/netarm_registers.h - * - * Copyright (C) 2005 - * Art Shipkowski, Videon Central, Inc., <art@videon-central.com> - * - * Copyright (C) 2000, 2001 NETsilicon, Inc. - * Copyright (C) 2000, 2001 WireSpeed Communications Corporation - * - * This software is copyrighted by WireSpeed. LICENSEE agrees that - * it will not delete this copyright notice, trademarks or protective - * notices from any copy made by LICENSEE. - * - * This software is provided "AS-IS" and any express or implied - * warranties or conditions, including but not limited to any - * implied warranties of merchantability and fitness for a particular - * purpose regarding this software. In no event shall WireSpeed - * be liable for any indirect, consequential, or incidental damages, - * loss of profits or revenue, loss of use or data, or interruption - * of business, whether the alleged damages are labeled in contract, - * tort, or indemnity. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * author(s) : Joe deBlaquiere - * - * Modified to support NS7520 by Art Shipkowski. - */ - -#ifndef __NET_ARM_REGISTERS_H -#define __NET_ARM_REGISTERS_H - -#include <config.h> - -/* fundamental constants : */ -/* the input crystal/clock frequency ( in Hz ) */ -#define NETARM_XTAL_FREQ_25MHz (18432000) -#define NETARM_XTAL_FREQ_33MHz (23698000) -#define NETARM_XTAL_FREQ_48MHz (48000000) -#define NETARM_XTAL_FREQ_55MHz (55000000) -#define NETARM_XTAL_FREQ_EMLIN1 (20000000) - -/* the frequency of SYS_CLK */ -#if defined(CONFIG_NETARM_EMLIN) - -/* EMLIN board: 33 MHz (exp.) */ -#define NETARM_PLL_COUNT_VAL 6 -#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz - -#elif defined(CONFIG_NETARM_NET40_REV2) - -/* NET+40 Rev2 boards: 33 MHz (with NETARM_XTAL_FREQ_25MHz) */ -#define NETARM_PLL_COUNT_VAL 6 -#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz - -#elif defined(CONFIG_NETARM_NET40_REV4) - -/* NET+40 Rev4 boards with EDO must clock slower: 25 MHz (with - NETARM_XTAL_FREQ_25MHz) 4 */ -#define NETARM_PLL_COUNT_VAL 4 -#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz - -#elif defined(CONFIG_NETARM_NET50) - -/* NET+50 boards: 40 MHz (with NETARM_XTAL_FREQ_25MHz) */ -#define NETARM_PLL_COUNT_VAL 8 -#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_25MHz - -#else /* CONFIG_NETARM_NS7520 */ - -#define NETARM_PLL_COUNT_VAL 0 - -#if defined(CONFIG_BOARD_UNC20) -#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_48MHz -#else -#define NETARM_XTAL_FREQ NETARM_XTAL_FREQ_55MHz -#endif - -#endif - -/* #include "arm_registers.h" */ -#include <asm/arch/netarm_gen_module.h> -#include <asm/arch/netarm_mem_module.h> -#include <asm/arch/netarm_ser_module.h> -#include <asm/arch/netarm_eni_module.h> -#include <asm/arch/netarm_dma_module.h> -#include <asm/arch/netarm_eth_module.h> - -#endif diff --git a/arch/arm/include/asm/arch-arm720t/netarm_ser_module.h b/arch/arm/include/asm/arch-arm720t/netarm_ser_module.h deleted file mode 100644 index 6fbae11c8d..0000000000 --- a/arch/arm/include/asm/arch-arm720t/netarm_ser_module.h +++ /dev/null @@ -1,347 +0,0 @@ -/* - * linux/include/asm-arm/arch-netarm/netarm_ser_module.h - * - * Copyright (C) 2000 NETsilicon, Inc. - * Copyright (C) 2000 Red Hat, Inc. - * - * This software is copyrighted by Red Hat. LICENSEE agrees that - * it will not delete this copyright notice, trademarks or protective - * notices from any copy made by LICENSEE. - * - * This software is provided "AS-IS" and any express or implied - * warranties or conditions, including but not limited to any - * implied warranties of merchantability and fitness for a particular - * purpose regarding this software. In no event shall Red Hat - * be liable for any indirect, consequential, or incidental damages, - * loss of profits or revenue, loss of use or data, or interruption - * of business, whether the alleged damages are labeled in contract, - * tort, or indemnity. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * author(s) : Joe deBlaquiere - * Clark Williams - */ - -#ifndef __NETARM_SER_MODULE_REGISTERS_H -#define __NETARM_SER_MODULE_REGISTERS_H - -#ifndef __ASSEMBLER__ - -/* (--sub)#include "types.h" */ - -/* serial channel control structure */ -typedef struct { - u32 ctrl_a; - u32 ctrl_b; - u32 status_a; - u32 bitrate; - u32 fifo; - u32 rx_buf_timer; - u32 rx_char_timer; - u32 rx_match; - u32 rx_match_mask; - u32 ctrl_c; - u32 status_b; - u32 status_c; - u32 fifo_last; - u32 unused[3]; -} netarm_serial_channel_t; - -#endif - -/* SER unit register offsets */ - -/* #ifdef CONFIG_ARCH_NETARM */ -#define NETARM_SER_MODULE_BASE (0xFFD00000) -/* #else */ -/* extern serial_channel_t netarm_dummy_registers[]; */ -/* #define NETARM_SER_MODULE_BASE (netarm_dummy_registers) */ -/* #ifndef NETARM_XTAL_FREQ */ -/* #define NETARM_XTAL_FREQ 18432000 */ -/* #endif */ -/* #endif */ - -/* calculate the sysclk value from the pll setting */ -#define NETARM_PLLED_SYSCLK_FREQ (( NETARM_XTAL_FREQ / 5 ) * \ - ( NETARM_PLL_COUNT_VAL + 3 )) - -#define get_serial_channel(c) (&(((netarm_serial_channel_t *)NETARM_SER_MODULE_BASE)[c])) - -#define NETARM_SER_CH1_CTRL_A (0x00) -#define NETARM_SER_CH1_CTRL_B (0x04) -#define NETARM_SER_CH1_STATUS_A (0x08) -#define NETARM_SER_CH1_BITRATE (0x0C) -#define NETARM_SER_CH1_FIFO (0x10) -#define NETARM_SER_CH1_RX_BUF_TMR (0x14) -#define NETARM_SER_CH1_RX_CHAR_TMR (0x18) -#define NETARM_SER_CH1_RX_MATCH (0x1c) -#define NETARM_SER_CH1_RX_MATCH_MASK (0x20) -#define NETARM_SER_CH1_CTRL_C (0x24) -#define NETARM_SER_CH1_STATUS_B (0x28) -#define NETARM_SER_CH1_STATUS_C (0x2c) -#define NETARM_SER_CH1_FIFO_LAST (0x30) - -#define NETARM_SER_CH2_CTRL_A (0x40) -#define NETARM_SER_CH2_CTRL_B (0x44) -#define NETARM_SER_CH2_STATUS_A (0x48) -#define NETARM_SER_CH2_BITRATE (0x4C) -#define NETARM_SER_CH2_FIFO (0x50) -#define NETARM_SER_CH2_RX_BUF_TMR (0x54) -#define NETARM_SER_CH2_RX_CHAR_TMR (0x58) -#define NETARM_SER_CH2_RX_MATCH (0x5c) -#define NETARM_SER_CH2_RX_MATCH_MASK (0x60) -#define NETARM_SER_CH2_CTRL_C (0x64) -#define NETARM_SER_CH2_STATUS_B (0x68) -#define NETARM_SER_CH2_STATUS_C (0x6c) -#define NETARM_SER_CH2_FIFO_LAST (0x70) - -/* select bitfield defintions */ - -/* Control Register A */ - -#define NETARM_SER_CTLA_ENABLE (0x80000000) -#define NETARM_SER_CTLA_BRK (0x40000000) - -#define NETARM_SER_CTLA_STICKP (0x20000000) - -#define NETARM_SER_CTLA_P_EVEN (0x18000000) -#define NETARM_SER_CTLA_P_ODD (0x08000000) -#define NETARM_SER_CTLA_P_NONE (0x00000000) - -/* if you read the errata, you will find that the STOP bits don't work right */ -#define NETARM_SER_CTLA_2STOP (0x00000000) -#define NETARM_SER_CTLA_3STOP (0x04000000) - -#define NETARM_SER_CTLA_5BITS (0x00000000) -#define NETARM_SER_CTLA_6BITS (0x01000000) -#define NETARM_SER_CTLA_7BITS (0x02000000) -#define NETARM_SER_CTLA_8BITS (0x03000000) - -#define NETARM_SER_CTLA_CTSTX (0x00800000) -#define NETARM_SER_CTLA_RTSRX (0x00400000) - -#define NETARM_SER_CTLA_LOOP_REM (0x00200000) -#define NETARM_SER_CTLA_LOOP_LOC (0x00100000) - -#define NETARM_SER_CTLA_GPIO2 (0x00080000) -#define NETARM_SER_CTLA_GPIO1 (0x00040000) - -#define NETARM_SER_CTLA_DTR_EN (0x00020000) -#define NETARM_SER_CTLA_RTS_EN (0x00010000) - -#define NETARM_SER_CTLA_IE_RX_BRK (0x00008000) -#define NETARM_SER_CTLA_IE_RX_FRMERR (0x00004000) -#define NETARM_SER_CTLA_IE_RX_PARERR (0x00002000) -#define NETARM_SER_CTLA_IE_RX_OVERRUN (0x00001000) -#define NETARM_SER_CTLA_IE_RX_RDY (0x00000800) -#define NETARM_SER_CTLA_IE_RX_HALF (0x00000400) -#define NETARM_SER_CTLA_IE_RX_FULL (0x00000200) -#define NETARM_SER_CTLA_IE_RX_DMAEN (0x00000100) -#define NETARM_SER_CTLA_IE_RX_DCD (0x00000080) -#define NETARM_SER_CTLA_IE_RX_RI (0x00000040) -#define NETARM_SER_CTLA_IE_RX_DSR (0x00000020) - -#define NETARM_SER_CTLA_IE_RX_ALL (NETARM_SER_CTLA_IE_RX_BRK \ - |NETARM_SER_CTLA_IE_RX_FRMERR \ - |NETARM_SER_CTLA_IE_RX_PARERR \ - |NETARM_SER_CTLA_IE_RX_OVERRUN \ - |NETARM_SER_CTLA_IE_RX_RDY \ - |NETARM_SER_CTLA_IE_RX_HALF \ - |NETARM_SER_CTLA_IE_RX_FULL \ - |NETARM_SER_CTLA_IE_RX_DMAEN \ - |NETARM_SER_CTLA_IE_RX_DCD \ - |NETARM_SER_CTLA_IE_RX_RI \ - |NETARM_SER_CTLA_IE_RX_DSR) - -#define NETARM_SER_CTLA_IE_TX_CTS (0x00000010) -#define NETARM_SER_CTLA_IE_TX_EMPTY (0x00000008) -#define NETARM_SER_CTLA_IE_TX_HALF (0x00000004) -#define NETARM_SER_CTLA_IE_TX_FULL (0x00000002) -#define NETARM_SER_CTLA_IE_TX_DMAEN (0x00000001) - -#define NETARM_SER_CTLA_IE_TX_ALL (NETARM_SER_CTLA_IE_TX_CTS \ - |NETARM_SER_CTLA_IE_TX_EMPTY \ - |NETARM_SER_CTLA_IE_TX_HALF \ - |NETARM_SER_CTLA_IE_TX_FULL \ - |NETARM_SER_CTLA_IE_TX_DMAEN) - -/* Control Register B */ - -#define NETARM_SER_CTLB_MATCH1_EN (0x80000000) -#define NETARM_SER_CTLB_MATCH2_EN (0x40000000) -#define NETARM_SER_CTLB_MATCH3_EN (0x20000000) -#define NETARM_SER_CTLB_MATCH4_EN (0x10000000) - -#define NETARM_SER_CTLB_RBGT_EN (0x08000000) -#define NETARM_SER_CTLB_RCGT_EN (0x04000000) - -#define NETARM_SER_CTLB_UART_MODE (0x00000000) -#define NETARM_SER_CTLB_HDLC_MODE (0x00100000) -#define NETARM_SER_CTLB_SPI_MAS_MODE (0x00200000) -#define NETARM_SER_CTLB_SPI_SLV_MODE (0x00300000) - -#define NETARM_SER_CTLB_REV_BIT_ORDER (0x00080000) - -#define NETARM_SER_CTLB_MAM1 (0x00040000) -#define NETARM_SER_CTLB_MAM2 (0x00020000) - -/* Status Register A */ - -#define NETARM_SER_STATA_MATCH1 (0x80000000) -#define NETARM_SER_STATA_MATCH2 (0x40000000) -#define NETARM_SER_STATA_MATCH3 (0x20000000) -#define NETARM_SER_STATA_MATCH4 (0x10000000) - -#define NETARM_SER_STATA_BGAP (0x80000000) -#define NETARM_SER_STATA_CGAP (0x40000000) - -#define NETARM_SER_STATA_RX_1B (0x00100000) -#define NETARM_SER_STATA_RX_2B (0x00200000) -#define NETARM_SER_STATA_RX_3B (0x00300000) -#define NETARM_SER_STATA_RX_4B (0x00000000) - -/* downshifted values */ - -#define NETARM_SER_STATA_RXFDB_1BYTES (0x001) -#define NETARM_SER_STATA_RXFDB_2BYTES (0x002) -#define NETARM_SER_STATA_RXFDB_3BYTES (0x003) -#define NETARM_SER_STATA_RXFDB_4BYTES (0x000) - -#define NETARM_SER_STATA_RXFDB_MASK (0x00300000) -#define NETARM_SER_STATA_RXFDB(x) (((x) & NETARM_SER_STATA_RXFDB_MASK) \ - >> 20) - -#define NETARM_SER_STATA_DCD (0x00080000) -#define NETARM_SER_STATA_RI (0x00040000) -#define NETARM_SER_STATA_DSR (0x00020000) -#define NETARM_SER_STATA_CTS (0x00010000) - -#define NETARM_SER_STATA_RX_BRK (0x00008000) -#define NETARM_SER_STATA_RX_FRMERR (0x00004000) -#define NETARM_SER_STATA_RX_PARERR (0x00002000) -#define NETARM_SER_STATA_RX_OVERRUN (0x00001000) -#define NETARM_SER_STATA_RX_RDY (0x00000800) -#define NETARM_SER_STATA_RX_HALF (0x00000400) -#define NETARM_SER_STATA_RX_CLOSED (0x00000200) -#define NETARM_SER_STATA_RX_FULL (0x00000100) -#define NETARM_SER_STATA_RX_DCD (0x00000080) -#define NETARM_SER_STATA_RX_RI (0x00000040) -#define NETARM_SER_STATA_RX_DSR (0x00000020) - -#define NETARM_SER_STATA_TX_CTS (0x00000010) -#define NETARM_SER_STATA_TX_RDY (0x00000008) -#define NETARM_SER_STATA_TX_HALF (0x00000004) -#define NETARM_SER_STATA_TX_FULL (0x00000002) -#define NETARM_SER_STATA_TX_DMAEN (0x00000001) - -/* you have to clear all receive signals to get the fifo to move forward */ -#define NETARM_SER_STATA_CLR_ALL (NETARM_SER_STATA_RX_BRK | \ - NETARM_SER_STATA_RX_FRMERR | \ - NETARM_SER_STATA_RX_PARERR | \ - NETARM_SER_STATA_RX_OVERRUN | \ - NETARM_SER_STATA_RX_HALF | \ - NETARM_SER_STATA_RX_CLOSED | \ - NETARM_SER_STATA_RX_FULL | \ - NETARM_SER_STATA_RX_DCD | \ - NETARM_SER_STATA_RX_RI | \ - NETARM_SER_STATA_RX_DSR | \ - NETARM_SER_STATA_TX_CTS ) - -/* Bit Rate Registers */ - -#define NETARM_SER_BR_EN (0x80000000) -#define NETARM_SER_BR_TMODE (0x40000000) - -#define NETARM_SER_BR_RX_CLK_INT (0x00000000) -#define NETARM_SER_BR_RX_CLK_EXT (0x20000000) -#define NETARM_SER_BR_TX_CLK_INT (0x00000000) -#define NETARM_SER_BR_TX_CLK_EXT (0x10000000) - -#define NETARM_SER_BR_RX_CLK_DRV (0x08000000) -#define NETARM_SER_BR_TX_CLK_DRV (0x04000000) - -#define NETARM_SER_BR_CLK_EXT_5 (0x00000000) -#define NETARM_SER_BR_CLK_SYSTEM (0x01000000) -#define NETARM_SER_BR_CLK_OUT1A (0x02000000) -#define NETARM_SER_BR_CLK_OUT2A (0x03000000) - -#define NETARM_SER_BR_TX_CLK_INV (0x00800000) -#define NETARM_SER_BR_RX_CLK_INV (0x00400000) - -/* complete settings assuming system clock input is 18MHz */ - -#define NETARM_SER_BR_MASK (0x000007FF) - -/* bit rate determined from equation Fbr = Fxtal / [ 10 * ( N + 1 ) ] */ -/* from section 7.5.4 of HW Ref Guide */ - -/* #ifdef CONFIG_NETARM_PLL_BYPASS */ -#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \ - NETARM_SER_BR_RX_CLK_INT | \ - NETARM_SER_BR_TX_CLK_INT | \ - NETARM_SER_BR_CLK_EXT_5 | \ - ( ( ( ( NETARM_XTAL_FREQ / \ - ( x * 10 ) ) - 1 ) / 16 ) & \ - NETARM_SER_BR_MASK ) ) -/* -#else -#define NETARM_SER_BR_X16(x) ( NETARM_SER_BR_EN | \ - NETARM_SER_BR_RX_CLK_INT | \ - NETARM_SER_BR_TX_CLK_INT | \ - NETARM_SER_BR_CLK_SYSTEM | \ - ( ( ( ( NETARM_PLLED_SYSCLK_FREQ / \ - ( x * 2 ) ) - 1 ) / 16 ) & \ - NETARM_SER_BR_MASK ) ) -#endif -*/ - -/* Receive Buffer Gap Timer */ - -#define NETARM_SER_RX_GAP_TIMER_EN (0x80000000) -#define NETARM_SER_RX_GAP_MASK (0x00003FFF) - -/* rx gap is a function of bit rate x */ - -/* #ifdef CONFIG_NETARM_PLL_BYPASS */ -#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \ - ( ( ( ( 10 * NETARM_XTAL_FREQ ) / \ - ( x * 5 * 512 ) ) - 1 ) & \ - NETARM_SER_RX_GAP_MASK ) ) -/* -#else -#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \ - ( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) / \ - ( x * 512 ) ) - 1 ) & \ - NETARM_SER_RX_GAP_MASK ) ) -#endif -*/ - -#if 0 -#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \ - ( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) / \ - ( x * 5 * 512 ) ) - 1 ) & \ - NETARM_SER_RX_GAP_MASK ) ) -#define NETARM_SER_RXGAP(x) ( NETARM_SER_RX_GAP_TIMER_EN | \ - ( ( ( ( 10 * NETARM_XTAL_FREQ ) / \ - ( x * 512 ) ) - 1 ) & \ - NETARM_SER_RX_GAP_MASK ) ) -#endif - -#define MIN_BAUD_RATE 600 -#define MAX_BAUD_RATE 115200 - -/* the default BAUD rate for the BOOTLOADER, there is a separate */ -/* setting in the serial driver <arch/armnommu/drivers/char/serial-netarm.h> */ -#define DEFAULT_BAUD_RATE 9600 -#define NETARM_SER_FIFO_SIZE 32 -#define MIN_GAP 0 - -#endif diff --git a/arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h b/arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h deleted file mode 100644 index 5715f3ef74..0000000000 --- a/arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h +++ /dev/null @@ -1,225 +0,0 @@ -#ifndef __LPC2292_REGISTERS_H -#define __LPC2292_REGISTERS_H - -#include <config.h> - -/* Macros for reading/writing registers */ -#define PUT8(reg, value) (*(volatile unsigned char*)(reg) = (value)) -#define PUT16(reg, value) (*(volatile unsigned short*)(reg) = (value)) -#define PUT32(reg, value) (*(volatile unsigned int*)(reg) = (value)) -#define GET8(reg) (*(volatile unsigned char*)(reg)) -#define GET16(reg) (*(volatile unsigned short*)(reg)) -#define GET32(reg) (*(volatile unsigned int*)(reg)) - -/* External Memory Controller */ - -#define BCFG0 0xFFE00000 /* 32-bits */ -#define BCFG1 0xFFE00004 /* 32-bits */ -#define BCFG2 0xFFE00008 /* 32-bits */ -#define BCFG3 0xFFE0000c /* 32-bits */ - -/* System Control Block */ - -#define EXTINT 0xE01FC140 -#define EXTWAKE 0xE01FC144 -#define EXTMODE 0xE01FC148 -#define EXTPOLAR 0xE01FC14C -#define MEMMAP 0xE01FC040 -#define PLLCON 0xE01FC080 -#define PLLCFG 0xE01FC084 -#define PLLSTAT 0xE01FC088 -#define PLLFEED 0xE01FC08C -#define PCON 0xE01FC0C0 -#define PCONP 0xE01FC0C4 -#define VPBDIV 0xE01FC100 - -/* Memory Acceleration Module */ - -#define MAMCR 0xE01FC000 -#define MAMTIM 0xE01FC004 - -/* Vectored Interrupt Controller */ - -#define VICIRQStatus 0xFFFFF000 -#define VICFIQStatus 0xFFFFF004 -#define VICRawIntr 0xFFFFF008 -#define VICIntSelect 0xFFFFF00C -#define VICIntEnable 0xFFFFF010 -#define VICIntEnClr 0xFFFFF014 -#define VICSoftInt 0xFFFFF018 -#define VICSoftIntClear 0xFFFFF01C -#define VICProtection 0xFFFFF020 -#define VICVectAddr 0xFFFFF030 -#define VICDefVectAddr 0xFFFFF034 -#define VICVectAddr0 0xFFFFF100 -#define VICVectAddr1 0xFFFFF104 -#define VICVectAddr2 0xFFFFF108 -#define VICVectAddr3 0xFFFFF10C -#define VICVectAddr4 0xFFFFF110 -#define VICVectAddr5 0xFFFFF114 -#define VICVectAddr6 0xFFFFF118 -#define VICVectAddr7 0xFFFFF11C -#define VICVectAddr8 0xFFFFF120 -#define VICVectAddr9 0xFFFFF124 -#define VICVectAddr10 0xFFFFF128 -#define VICVectAddr11 0xFFFFF12C -#define VICVectAddr12 0xFFFFF130 -#define VICVectAddr13 0xFFFFF134 -#define VICVectAddr14 0xFFFFF138 -#define VICVectAddr15 0xFFFFF13C -#define VICVectCntl0 0xFFFFF200 -#define VICVectCntl1 0xFFFFF204 -#define VICVectCntl2 0xFFFFF208 -#define VICVectCntl3 0xFFFFF20C -#define VICVectCntl4 0xFFFFF210 -#define VICVectCntl5 0xFFFFF214 -#define VICVectCntl6 0xFFFFF218 -#define VICVectCntl7 0xFFFFF21C -#define VICVectCntl8 0xFFFFF220 -#define VICVectCntl9 0xFFFFF224 -#define VICVectCntl10 0xFFFFF228 -#define VICVectCntl11 0xFFFFF22C -#define VICVectCntl12 0xFFFFF230 -#define VICVectCntl13 0xFFFFF234 -#define VICVectCntl14 0xFFFFF238 -#define VICVectCntl15 0xFFFFF23C - -/* Pin connect block */ - -#define PINSEL0 0xE002C000 /* 32 bits */ -#define PINSEL1 0xE002C004 /* 32 bits */ -#define PINSEL2 0xE002C014 /* 32 bits */ - -/* GPIO */ - -#define IO0PIN 0xE0028000 -#define IO0SET 0xE0028004 -#define IO0DIR 0xE0028008 -#define IO0CLR 0xE002800C -#define IO1PIN 0xE0028010 -#define IO1SET 0xE0028014 -#define IO1DIR 0xE0028018 -#define IO1CLR 0xE002801C -#define IO2PIN 0xE0028020 -#define IO2SET 0xE0028024 -#define IO2DIR 0xE0028028 -#define IO2CLR 0xE002802C -#define IO3PIN 0xE0028030 -#define IO3SET 0xE0028034 -#define IO3DIR 0xE0028038 -#define IO3CLR 0xE002803C - -/* Uarts */ - -#define U0RBR 0xE000C000 -#define U0THR 0xE000C000 -#define U0IER 0xE000C004 -#define U0IIR 0xE000C008 -#define U0FCR 0xE000C008 -#define U0LCR 0xE000C00C -#define U0LSR 0xE000C014 -#define U0SCR 0xE000C01C -#define U0DLL 0xE000C000 -#define U0DLM 0xE000C004 - -#define U1RBR 0xE0010000 -#define U1THR 0xE0010000 -#define U1IER 0xE0010004 -#define U1IIR 0xE0010008 -#define U1FCR 0xE0010008 -#define U1LCR 0xE001000C -#define U1MCR 0xE0010010 -#define U1LSR 0xE0010014 -#define U1MSR 0xE0010018 -#define U1SCR 0xE001001C -#define U1DLL 0xE0010000 -#define U1DLM 0xE0010004 - -/* I2C */ - -#define I2CONSET 0xE001C000 -#define I2STAT 0xE001C004 -#define I2DAT 0xE001C008 -#define I2ADR 0xE001C00C -#define I2SCLH 0xE001C010 -#define I2SCLL 0xE001C014 -#define I2CONCLR 0xE001C018 - -/* SPI */ - -#define S0SPCR 0xE0020000 -#define S0SPSR 0xE0020004 -#define S0SPDR 0xE0020008 -#define S0SPCCR 0xE002000C -#define S0SPINT 0xE002001C - -#define S1SPCR 0xE0030000 -#define S1SPSR 0xE0030004 -#define S1SPDR 0xE0030008 -#define S1SPCCR 0xE003000C -#define S1SPINT 0xE003001C - -/* CAN controller */ - -/* skip for now */ - -/* Timers */ - -#define T0IR 0xE0004000 -#define T0TCR 0xE0004004 -#define T0TC 0xE0004008 -#define T0PR 0xE000400C -#define T0PC 0xE0004010 -#define T0MCR 0xE0004014 -#define T0MR0 0xE0004018 -#define T0MR1 0xE000401C -#define T0MR2 0xE0004020 -#define T0MR3 0xE0004024 -#define T0CCR 0xE0004028 -#define T0CR0 0xE000402C -#define T0CR1 0xE0004030 -#define T0CR2 0xE0004034 -#define T0CR3 0xE0004038 -#define T0EMR 0xE000403C - -#define T1IR 0xE0008000 -#define T1TCR 0xE0008004 -#define T1TC 0xE0008008 -#define T1PR 0xE000800C -#define T1PC 0xE0008010 -#define T1MCR 0xE0008014 -#define T1MR0 0xE0008018 -#define T1MR1 0xE000801C -#define T1MR2 0xE0008020 -#define T1MR3 0xE0008024 -#define T1CCR 0xE0008028 -#define T1CR0 0xE000802C -#define T1CR1 0xE0008030 -#define T1CR2 0xE0008034 -#define T1CR3 0xE0008038 -#define T1EMR 0xE000803C - -/* PWM */ - -/* skip for now */ - -/* A/D converter */ - -/* skip for now */ - -/* Real Time Clock */ - -/* skip for now */ - -/* Watchdog */ - -#define WDMOD 0xE0000000 -#define WDTC 0xE0000004 -#define WDFEED 0xE0000008 -#define WDTV 0xE000000C - -/* EmbeddedICE LOGIC */ - -/* skip for now */ - -#endif diff --git a/arch/arm/include/asm/arch-lpc2292/spi.h b/arch/arm/include/asm/arch-lpc2292/spi.h deleted file mode 100644 index 6ae66e8ba7..0000000000 --- a/arch/arm/include/asm/arch-lpc2292/spi.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - This file defines the interface to the lpc22xx SPI module. - Copyright (C) 2006 Embedded Artists AB (www.embeddedartists.com) - - This file may be included in software not adhering to the GPL. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#ifndef SPI_H -#define SPI_H - -#include <config.h> -#include <common.h> -#include <asm/errno.h> -#include <asm/arch/hardware.h> - -#define SPIF 0x80 - -#define spi_lock() disable_interrupts(); -#define spi_unlock() enable_interrupts(); - -extern unsigned long spi_flags; -extern unsigned char spi_idle; - -int spi_init(void); - -static inline unsigned char spi_read(void) -{ - unsigned char b; - - PUT8(S0SPDR, spi_idle); - while (!(GET8(S0SPSR) & SPIF)); - b = GET8(S0SPDR); - - return b; -} - -static inline void spi_write(unsigned char b) -{ - PUT8(S0SPDR, b); - while (!(GET8(S0SPSR) & SPIF)); - GET8(S0SPDR); /* this will clear the SPIF bit */ -} - -static inline void spi_set_clock(unsigned char clk_value) -{ - PUT8(S0SPCCR, clk_value); -} - -static inline void spi_set_cfg(unsigned char phase, - unsigned char polarity, - unsigned char lsbf) -{ - unsigned char v = 0x20; /* master bit set */ - - if (phase) - v |= 0x08; /* set phase bit */ - if (polarity) { - v |= 0x10; /* set polarity bit */ - spi_idle = 0xFF; - } else { - spi_idle = 0x00; - } - if (lsbf) - v |= 0x40; /* set lsbf bit */ - - PUT8(S0SPCR, v); -} -#endif /* SPI_H */ diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h index 54add4b456..ffaffbb3bf 100644 --- a/arch/arm/include/asm/arch-omap3/dss.h +++ b/arch/arm/include/asm/arch-omap3/dss.h @@ -190,6 +190,7 @@ struct panel_config { #define PANEL_TIMING_H(bp, fp, sw) (DSS_HBP(bp) | DSS_HFP(fp) | DSS_HSW(sw)) #define PANEL_TIMING_V(bp, fp, sw) (DSS_VBP(bp) | DSS_VFP(fp) | DSS_VSW(sw)) +#define PANEL_LCD_SIZE(xres, yres) ((yres - 1) << 16 | (xres - 1)) /* Generic DSS Functions */ void omap3_dss_venc_config(const struct venc_regs *venc_cfg, diff --git a/arch/arm/include/asm/arch-s3c4510b/hardware.h b/arch/arm/include/asm/arch-s3c4510b/hardware.h deleted file mode 100644 index 6b8c8edd7a..0000000000 --- a/arch/arm/include/asm/arch-s3c4510b/hardware.h +++ /dev/null @@ -1,272 +0,0 @@ -#ifndef __HW_S3C4510_H -#define __HW_S3C4510_H - -/* - * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) - * Curt Brune <curt@cucy.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Description: Samsung S3C4510B register layout - */ - -/*------------------------------------------------------------------------ - * ASIC Address Definition - *----------------------------------------------------------------------*/ - -/* L1 8KB on chip SRAM base address */ -#define SRAM_BASE (0x03fe0000) - -/* Special Register Start Address After System Reset */ -#define REG_BASE (0x03ff0000) -#define SPSTR (REG_BASE) - -/* *********************** */ -/* System Manager Register */ -/* *********************** */ -#define REG_SYSCFG (REG_BASE+0x0000) - -#define REG_CLKCON (REG_BASE+0x3000) -#define REG_EXTACON0 (REG_BASE+0x3008) -#define REG_EXTACON1 (REG_BASE+0x300c) -#define REG_EXTDBWTH (REG_BASE+0x3010) -#define REG_ROMCON0 (REG_BASE+0x3014) -#define REG_ROMCON1 (REG_BASE+0x3018) -#define REG_ROMCON2 (REG_BASE+0x301c) -#define REG_ROMCON3 (REG_BASE+0x3020) -#define REG_ROMCON4 (REG_BASE+0x3024) -#define REG_ROMCON5 (REG_BASE+0x3028) -#define REG_DRAMCON0 (REG_BASE+0x302c) -#define REG_DRAMCON1 (REG_BASE+0x3030) -#define REG_DRAMCON2 (REG_BASE+0x3034) -#define REG_DRAMCON3 (REG_BASE+0x3038) -#define REG_REFEXTCON (REG_BASE+0x303c) - -/* *********************** */ -/* Ethernet BDMA Register */ -/* *********************** */ -#define REG_BDMATXCON (REG_BASE+0x9000) -#define REG_BDMARXCON (REG_BASE+0x9004) -#define REG_BDMATXPTR (REG_BASE+0x9008) -#define REG_BDMARXPTR (REG_BASE+0x900c) -#define REG_BDMARXLSZ (REG_BASE+0x9010) -#define REG_BDMASTAT (REG_BASE+0x9014) - -/* Content Address Memory */ -#define REG_CAM_BASE (REG_BASE+0x9100) - -#define REG_BDMATXBUF (REG_BASE+0x9200) -#define REG_BDMARXBUF (REG_BASE+0x9800) - -/* *********************** */ -/* Ethernet MAC Register */ -/* *********************** */ -#define REG_MACCON (REG_BASE+0xa000) -#define REG_CAMCON (REG_BASE+0xa004) -#define REG_MACTXCON (REG_BASE+0xa008) -#define REG_MACTXSTAT (REG_BASE+0xa00c) -#define REG_MACRXCON (REG_BASE+0xa010) -#define REG_MACRXSTAT (REG_BASE+0xa014) -#define REG_STADATA (REG_BASE+0xa018) -#define REG_STACON (REG_BASE+0xa01c) -#define REG_CAMEN (REG_BASE+0xa028) -#define REG_EMISSCNT (REG_BASE+0xa03c) -#define REG_EPZCNT (REG_BASE+0xa040) -#define REG_ERMPZCNT (REG_BASE+0xa044) -#define REG_ETXSTAT (REG_BASE+0x9040) -#define REG_MACRXDESTR (REG_BASE+0xa064) -#define REG_MACRXSTATEM (REG_BASE+0xa090) -#define REG_MACRXFIFO (REG_BASE+0xa200) - -/********************/ -/* I2C Bus Register */ -/********************/ -#define REG_I2C_CON (REG_BASE+0xf000) -#define REG_I2C_BUF (REG_BASE+0xf004) -#define REG_I2C_PS (REG_BASE+0xf008) -#define REG_I2C_COUNT (REG_BASE+0xf00c) - -/********************/ -/* GDMA 0 */ -/********************/ -#define REG_GDMACON0 (REG_BASE+0xb000) -#define REG_GDMA0_RUN_ENABLE (REG_BASE+0xb020) -#define REG_GDMASRC0 (REG_BASE+0xb004) -#define REG_GDMADST0 (REG_BASE+0xb008) -#define REG_GDMACNT0 (REG_BASE+0xb00c) - -/********************/ -/* GDMA 1 */ -/********************/ -#define REG_GDMACON1 (REG_BASE+0xc000) -#define REG_GDMA1_RUN_ENABLE (REG_BASE+0xc020) -#define REG_GDMASRC1 (REG_BASE+0xc004) -#define REG_GDMADST1 (REG_BASE+0xc008) -#define REG_GDMACNT1 (REG_BASE+0xc00c) - -/********************/ -/* UART 0 */ -/********************/ -#define UART0_BASE (REG_BASE+0xd000) -#define REG_UART0_LCON (REG_BASE+0xd000) -#define REG_UART0_CTRL (REG_BASE+0xd004) -#define REG_UART0_STAT (REG_BASE+0xd008) -#define REG_UART0_TXB (REG_BASE+0xd00c) -#define REG_UART0_RXB (REG_BASE+0xd010) -#define REG_UART0_BAUD_DIV (REG_BASE+0xd014) -#define REG_UART0_BAUD_CNT (REG_BASE+0xd018) -#define REG_UART0_BAUD_CLK (REG_BASE+0xd01C) - -/********************/ -/* UART 1 */ -/********************/ -#define UART1_BASE (REG_BASE+0xe000) -#define REG_UART1_LCON (REG_BASE+0xe000) -#define REG_UART1_CTRL (REG_BASE+0xe004) -#define REG_UART1_STAT (REG_BASE+0xe008) -#define REG_UART1_TXB (REG_BASE+0xe00c) -#define REG_UART1_RXB (REG_BASE+0xe010) -#define REG_UART1_BAUD_DIV (REG_BASE+0xe014) -#define REG_UART1_BAUD_CNT (REG_BASE+0xe018) -#define REG_UART1_BAUD_CLK (REG_BASE+0xe01C) - -/********************/ -/* Timer Register */ -/********************/ -#define REG_TMOD (REG_BASE+0x6000) -#define REG_TDATA0 (REG_BASE+0x6004) -#define REG_TDATA1 (REG_BASE+0x6008) -#define REG_TCNT0 (REG_BASE+0x600c) -#define REG_TCNT1 (REG_BASE+0x6010) - -/**********************/ -/* I/O Port Interface */ -/**********************/ -#define REG_IOPMODE (REG_BASE+0x5000) -#define REG_IOPCON (REG_BASE+0x5004) -#define REG_IOPDATA (REG_BASE+0x5008) - -/*********************************/ -/* Interrupt Controller Register */ -/*********************************/ -#define REG_INTMODE (REG_BASE+0x4000) -#define REG_INTPEND (REG_BASE+0x4004) -#define REG_INTMASK (REG_BASE+0x4008) - -#define REG_INTPRI0 (REG_BASE+0x400c) -#define REG_INTPRI1 (REG_BASE+0x4010) -#define REG_INTPRI2 (REG_BASE+0x4014) -#define REG_INTPRI3 (REG_BASE+0x4018) -#define REG_INTPRI4 (REG_BASE+0x401c) -#define REG_INTPRI5 (REG_BASE+0x4020) -#define REG_INTOFFSET (REG_BASE+0x4024) -#define REG_INTPNDPRI (REG_BASE+0x4028) -#define REG_INTPNDTST (REG_BASE+0x402C) - -/*********************************/ -/* CACHE CONTROL MASKS */ -/*********************************/ -#define CACHE_STALL (0x00000001) -#define CACHE_ENABLE (0x00000002) -#define CACHE_WRITE_BUFF (0x00000004) -#define CACHE_MODE (0x00000030) -#define CACHE_MODE_00 (0x00000000) -#define CACHE_MODE_01 (0x00000010) -#define CACHE_MODE_10 (0x00000020) - -/*********************************/ -/* CACHE RAM BASE ADDRESSES */ -/*********************************/ -#define CACHE_SET0_RAM (0x10000000) -#define CACHE_SET1_RAM (0x10800000) -#define CACHE_TAG_RAM (0x11000000) - -/*********************************/ -/* CACHE_DISABLE MASK */ -/*********************************/ -#define CACHE_DISABLE_MASK (0x04000000) - -#define GET_REG(reg) (*((volatile u32 *)(reg))) -#define PUT_REG(reg, val) (*((volatile u32 *)(reg)) = ((u32)(val))) -#define SET_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) | mask)) -#define CLR_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) & ~mask)) -#define PUT_U16(reg, val) (*((volatile u16 *)(reg)) = ((u16)(val))) -#define PUT__U8(reg, val) (*((volatile u8 *)(reg)) = (( u8)((val)&0xFF))) -#define GET__U8(reg) (*((volatile u8 *)(reg))) - -#define PUT_LED(val) (PUT_REG(REG_IOPDATA, (~val)&0xFF)) -#define GET_LED() ((~GET_REG( REG_IOPDATA)) & 0xFF) -#define SET_LED(val) { u32 led = GET_LED(); led |= 1 << (val); PUT_LED( led); } -#define CLR_LED(val) { u32 led = GET_LED(); led &= ~(1 << (val)); PUT_LED( led); } - -/***********************************/ -/* CLOCK CONSTANTS -- 50 MHz Clock */ -/***********************************/ - -#define CLK_FREQ_MHZ (50) -#define t_data_us(t) ((t)*CLK_FREQ_MHZ-1) /* t is time tick,unit[us] */ -#define t_data_ms(t) (t_data_us((t)*1000)) /* t is time tick,unit[ms] */ - -/*********************************************************/ -/* TIMER MODE REGISTER */ -/*********************************************************/ -#define TM0_RUN 0x01 /* Timer 0 enable */ -#define TM0_TOGGLE 0x02 /* 0, interval mode */ -#define TM0_OUT_1 0x04 /* Timer 0 Initial TOUT0 value */ -#define TM1_RUN 0x08 /* Timer 1 enable */ -#define TM1_TOGGLE 0x10 /* 0, interval mode */ -#define TM1_OUT_1 0x20 /* Timer 0 Initial TOUT0 value */ - - -/*********************************/ -/* INTERRUPT SOURCES */ -/*********************************/ -#define INT_EXTINT0 0 -#define INT_EXTINT1 1 -#define INT_EXTINT2 2 -#define INT_EXTINT3 3 -#define INT_UARTTX0 4 -#define INT_UARTRX0 5 -#define INT_UARTTX1 6 -#define INT_UARTRX1 7 -#define INT_GDMA0 8 -#define INT_GDMA1 9 -#define INT_TIMER0 10 -#define INT_TIMER1 11 -#define INT_HDLCTXA 12 -#define INT_HDLCRXA 13 -#define INT_HDLCTXB 14 -#define INT_HDLCRXB 15 -#define INT_BDMATX 16 -#define INT_BDMARX 17 -#define INT_MACTX 18 -#define INT_MACRX 19 -#define INT_IIC 20 -#define INT_GLOBAL 21 -#define N_IRQS (21) - -#ifndef __ASSEMBLER__ -struct _irq_handler { - void *m_data; - void (*m_func)( void *data); -}; - -#endif - -#endif /* __S3C4510_h */ diff --git a/arch/arm/include/asm/arch-tegra20/spl.h b/arch/arm/include/asm/arch-tegra20/spl.h new file mode 100644 index 0000000000..5e453c5cc7 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/spl.h @@ -0,0 +1,28 @@ +/* + * (C) Copyright 2012 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_ARCH_SPL_H_ + +#define BOOT_DEVICE_RAM 1 + +#endif diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index f8088fe21a..2b9af93806 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -34,7 +34,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER unsigned long precon_buf_idx; /* Pre-Console buffer index */ diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 89df4dc708..78a7facfc3 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -267,3 +267,8 @@ struct meminfo { extern struct meminfo meminfo; #endif + +/* + * Board specified tags + */ +void setup_board_tags(struct tag **in_params); diff --git a/arch/arm/include/asm/u-boot.h b/arch/arm/include/asm/u-boot.h index eac3800729..2ba98bca7d 100644 --- a/arch/arm/include/asm/u-boot.h +++ b/arch/arm/include/asm/u-boot.h @@ -37,7 +37,7 @@ #define _U_BOOT_H_ 1 typedef struct bd_info { - int bi_baudrate; /* serial console baudrate */ + unsigned int bi_baudrate; /* serial console baudrate */ ulong bi_arch_number; /* unique id for this board */ ulong bi_boot_params; /* where this board expects params */ unsigned long bi_arm_freq; /* arm frequency */ diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 0b47ab341e..92cad9a6eb 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -57,13 +57,6 @@ #include <miiphy.h> #endif -#ifdef CONFIG_DRIVER_SMC91111 -#include "../drivers/net/smc91111.h" -#endif -#ifdef CONFIG_DRIVER_LAN91C96 -#include "../drivers/net/lan91c96.h" -#endif - DECLARE_GLOBAL_DATA_PTR; ulong monitor_flash_len; @@ -274,6 +267,8 @@ void board_init_f(ulong bootflag) #ifdef CONFIG_PRAM ulong reg; #endif + void *new_fdt = NULL; + size_t fdt_size = 0; bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f"); @@ -409,6 +404,22 @@ void board_init_f(ulong bootflag) debug("Reserving %zu Bytes for Global Data at: %08lx\n", sizeof (gd_t), addr_sp); +#if defined(CONFIG_OF_SEPARATE) && defined(CONFIG_OF_CONTROL) + /* + * If the device tree is sitting immediate above our image then we + * must relocate it. If it is embedded in the data section, then it + * will be relocated with other data. + */ + if (gd->fdt_blob) { + fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32); + + addr_sp -= fdt_size; + new_fdt = (void *)addr_sp; + debug("Reserving %zu Bytes for FDT at: %08lx\n", + fdt_size, addr_sp); + } +#endif + /* setup stackpointer for exeptions */ gd->irq_sp = addr_sp; #ifdef CONFIG_USE_IRQ @@ -442,6 +453,10 @@ void board_init_f(ulong bootflag) gd->start_addr_sp = addr_sp; gd->reloc_off = addr - _TEXT_BASE; debug("relocation Offset is: %08lx\n", gd->reloc_off); + if (new_fdt) { + memcpy(new_fdt, gd->fdt_blob, fdt_size); + gd->fdt_blob = new_fdt; + } memcpy(id, (void *)gd, sizeof(gd_t)); relocate_code(addr_sp, id, addr); @@ -591,16 +606,6 @@ void board_init_r(gd_t *id, ulong dest_addr) /* enable exceptions */ enable_interrupts(); - /* Perform network card initialisation if necessary */ -#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96) - /* XXX: this needs to be moved to board init */ - if (getenv("ethaddr")) { - uchar enetaddr[6]; - eth_getenv_enetaddr("ethaddr", enetaddr); - smc_set_mac_addr(enetaddr); - } -#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */ - /* Initialize from environment */ load_addr = getenv_ulong("loadaddr", 16, load_addr); diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 37476cc90d..1bd2730856 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -34,6 +34,7 @@ #include <libfdt.h> #include <fdt_support.h> #include <asm/bootm.h> +#include <linux/compiler.h> DECLARE_GLOBAL_DATA_PTR; @@ -269,6 +270,8 @@ static int create_fdt(bootm_headers_t *images) } #endif +__weak void setup_board_tags(struct tag **in_params) {} + /* Subcommand: PREP */ static void boot_prep_linux(bootm_headers_t *images) { @@ -310,6 +313,7 @@ static void boot_prep_linux(bootm_headers_t *images) setup_initrd_tag(gd->bd, images->rd_start, images->rd_end); #endif + setup_board_tags(¶ms); setup_end_tag(gd->bd); #else /* all tags */ printf("FDT and ATAGS support not compiled in - hanging\n"); diff --git a/arch/avr32/cpu/u-boot.lds b/arch/avr32/cpu/u-boot.lds index 0e532f234e..0b16d2a883 100644 --- a/arch/avr32/cpu/u-boot.lds +++ b/arch/avr32/cpu/u-boot.lds @@ -47,11 +47,11 @@ SECTIONS } . = ALIGN(4); - __u_boot_cmd_start = .; - .u_boot_cmd : { - KEEP(*(.u_boot_cmd)) + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> } - __u_boot_cmd_end = .; . = ALIGN(4); _got = .; diff --git a/arch/avr32/include/asm/global_data.h b/arch/avr32/include/asm/global_data.h index 7878bb185a..bf661e23be 100644 --- a/arch/avr32/include/asm/global_data.h +++ b/arch/avr32/include/asm/global_data.h @@ -33,7 +33,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long stack_end; /* highest stack address */ unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER diff --git a/arch/avr32/include/asm/u-boot.h b/arch/avr32/include/asm/u-boot.h index 1d2959a2ad..97bbbdef6d 100644 --- a/arch/avr32/include/asm/u-boot.h +++ b/arch/avr32/include/asm/u-boot.h @@ -23,7 +23,7 @@ #define __ASM_U_BOOT_H__ 1 typedef struct bd_info { - unsigned long bi_baudrate; + unsigned int bi_baudrate; unsigned char bi_phy_id[4]; unsigned long bi_board_number; void *bi_boot_params; diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c index 9d3b76e15a..e3287c486b 100644 --- a/arch/avr32/lib/board.c +++ b/arch/avr32/lib/board.c @@ -272,8 +272,8 @@ void board_init_r(gd_t *new_gd, ulong dest_addr) /* * We have to relocate the command table manually */ - fixup_cmdtable(&__u_boot_cmd_start, - (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); + fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd), + ll_entry_count(cmd_tbl_t, cmd)); #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ diff --git a/arch/blackfin/cpu/u-boot.lds b/arch/blackfin/cpu/u-boot.lds index 2b8d285e1f..58db838fb0 100644 --- a/arch/blackfin/cpu/u-boot.lds +++ b/arch/blackfin/cpu/u-boot.lds @@ -112,11 +112,9 @@ SECTIONS CONSTRUCTORS } >ram_data - .u_boot_cmd : - { - ___u_boot_cmd_start = .; - *(.u_boot_cmd) - ___u_boot_cmd_end = .; + + .u_boot_list : { + #include <u-boot.lst> } >ram_data .text_l1 : diff --git a/arch/blackfin/include/asm/global_data.h b/arch/blackfin/include/asm/global_data.h index 290a9e7662..d91e5a40d3 100644 --- a/arch/blackfin/include/asm/global_data.h +++ b/arch/blackfin/include/asm/global_data.h @@ -41,7 +41,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; unsigned long board_type; - unsigned long baudrate; + unsigned int baudrate; unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER unsigned long precon_buf_idx; /* Pre-Console buffer index */ diff --git a/arch/blackfin/include/asm/u-boot.h b/arch/blackfin/include/asm/u-boot.h index df81183e81..7abd6c2a32 100644 --- a/arch/blackfin/include/asm/u-boot.h +++ b/arch/blackfin/include/asm/u-boot.h @@ -29,7 +29,7 @@ #define _U_BOOT_H_ 1 typedef struct bd_info { - int bi_baudrate; /* serial console baudrate */ + unsigned int bi_baudrate; /* serial console baudrate */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ phys_size_t bi_memsize; /* size of DRAM memory in bytes */ diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index e47b606e87..9fbbea0d9b 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -78,7 +78,7 @@ static void display_global_data(void) printf(" gd: %p\n", gd); printf(" |-flags: %lx\n", gd->flags); printf(" |-board_type: %lx\n", gd->board_type); - printf(" |-baudrate: %lu\n", gd->baudrate); + printf(" |-baudrate: %u\n", gd->baudrate); printf(" |-have_console: %lx\n", gd->have_console); printf(" |-ram_size: %lx\n", gd->ram_size); printf(" |-env_addr: %lx\n", gd->env_addr); diff --git a/arch/m68k/cpu/mcf5227x/cpu_init.c b/arch/m68k/cpu/mcf5227x/cpu_init.c index e23b20df91..1928eb384e 100644 --- a/arch/m68k/cpu/mcf5227x/cpu_init.c +++ b/arch/m68k/cpu/mcf5227x/cpu_init.c @@ -31,6 +31,7 @@ #include <asm/immap.h> #include <asm/io.h> #include <asm/rtc.h> +#include <linux/compiler.h> /* * Breath some life into the CPU... @@ -41,12 +42,13 @@ */ void cpu_init_f(void) { - scm1_t *scm1 = (scm1_t *) MMAP_SCM1; gpio_t *gpio = (gpio_t *) MMAP_GPIO; - fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; - pll_t *pll = (pll_t *)MMAP_PLL; + fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS; #if !defined(CONFIG_CF_SBF) + scm1_t *scm1 = (scm1_t *) MMAP_SCM1; + pll_t *pll = (pll_t *)MMAP_PLL; + /* Workaround, must place before fbcs */ out_be32(&pll->psr, 0x12); diff --git a/arch/m68k/cpu/mcf5227x/start.S b/arch/m68k/cpu/mcf5227x/start.S index c5096a80c2..a683778127 100644 --- a/arch/m68k/cpu/mcf5227x/start.S +++ b/arch/m68k/cpu/mcf5227x/start.S @@ -485,7 +485,7 @@ clear_bss: /* exception code */ .globl _fault _fault: - jmp _fault + bra _fault .globl _exc_handler _exc_handler: diff --git a/arch/m68k/cpu/mcf523x/start.S b/arch/m68k/cpu/mcf523x/start.S index e6a69ab470..05f17231b2 100644 --- a/arch/m68k/cpu/mcf523x/start.S +++ b/arch/m68k/cpu/mcf523x/start.S @@ -247,7 +247,7 @@ clear_bss: /* exception code */ .globl _fault _fault: - jmp _fault + bra _fault .globl _exc_handler _exc_handler: diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S index ee17792cb3..f5e55dd965 100644 --- a/arch/m68k/cpu/mcf52x2/start.S +++ b/arch/m68k/cpu/mcf52x2/start.S @@ -307,7 +307,7 @@ clear_bss: /* exception code */ .globl _fault _fault: - jmp _fault + bra _fault .globl _exc_handler _exc_handler: diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S index fe98d76474..583ed1d41a 100644 --- a/arch/m68k/cpu/mcf532x/start.S +++ b/arch/m68k/cpu/mcf532x/start.S @@ -261,7 +261,7 @@ clear_bss: /* exception code */ .globl _fault _fault: - jmp _fault + bra _fault .globl _exc_handler _exc_handler: diff --git a/arch/m68k/cpu/mcf5445x/config.mk b/arch/m68k/cpu/mcf5445x/config.mk index 61a731eeff..0c48783e4c 100644 --- a/arch/m68k/cpu/mcf5445x/config.mk +++ b/arch/m68k/cpu/mcf5445x/config.mk @@ -4,6 +4,8 @@ # (C) Copyright 2000-2004 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # +# Copyright 2011-2012 Freescale Semiconductor, Inc. +# # See file CREDITS for list of people who contributed to this # project. # @@ -24,7 +26,15 @@ # PLATFORM_RELFLAGS += -ffixed-d7 -msep-data + +cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') +is5441x:=$(shell grep CONFIG_MCF5441x $(TOPDIR)/include/$(cfg)) + +ifneq (,$(findstring CONFIG_MCF5441x,$(is5441x))) +PLATFORM_CPPFLAGS += -mcpu=54418 -fPIC +else PLATFORM_CPPFLAGS += -mcpu=54455 -fPIC +endif ifneq (,$(findstring -linux-,$(shell $(CC) --version))) ifneq (,$(findstring GOT,$(shell $(LD) --help))) diff --git a/arch/m68k/cpu/mcf5445x/cpu.c b/arch/m68k/cpu/mcf5445x/cpu.c index adfc708c35..b612cdaea1 100644 --- a/arch/m68k/cpu/mcf5445x/cpu.c +++ b/arch/m68k/cpu/mcf5445x/cpu.c @@ -39,6 +39,8 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { rcm_t *rcm = (rcm_t *) (MMAP_RCM); udelay(1000); + out_8(&rcm->rcr, RCM_RCR_FRCRSTOUT); + udelay(10000); setbits_8(&rcm->rcr, RCM_RCR_SOFTRST); /* we don't return! */ @@ -74,6 +76,21 @@ int checkcpu(void) case 0x4f: id = 54450; break; + case 0x9F: + id = 54410; + break; + case 0xA0: + id = 54415; + break; + case 0xA1: + id = 54416; + break; + case 0xA2: + id = 54417; + break; + case 0xA3: + id = 54418; + break; } if (id) { diff --git a/arch/m68k/cpu/mcf5445x/cpu_init.c b/arch/m68k/cpu/mcf5445x/cpu_init.c index 3f9209ff19..6e947d06f9 100644 --- a/arch/m68k/cpu/mcf5445x/cpu_init.c +++ b/arch/m68k/cpu/mcf5445x/cpu_init.c @@ -31,6 +31,7 @@ #include <asm/processor.h> #include <asm/rtc.h> #include <asm/io.h> +#include <linux/compiler.h> #if defined(CONFIG_CMD_NET) #include <config.h> @@ -38,37 +39,11 @@ #include <asm/fec.h> #endif -/* - * Breath some life into the CPU... - * - * Set up the memory map, - * initialize a bunch of registers, - * initialize the UPM's - */ -void cpu_init_f(void) +void init_fbcs(void) { - scm1_t *scm1 = (scm1_t *) MMAP_SCM1; - gpio_t *gpio = (gpio_t *) MMAP_GPIO; - fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; - - out_be32(&scm1->mpr, 0x77777777); - out_be32(&scm1->pacra, 0); - out_be32(&scm1->pacrb, 0); - out_be32(&scm1->pacrc, 0); - out_be32(&scm1->pacrd, 0); - out_be32(&scm1->pacre, 0); - out_be32(&scm1->pacrf, 0); - out_be32(&scm1->pacrg, 0); + fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS; - /* FlexBus */ - out_8(&gpio->par_be, - GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | - GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0); - out_8(&gpio->par_fbctl, - GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA | - GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS); - -#if !defined(CONFIG_CF_SBF) +#if !defined(CONFIG_SERIAL_BOOT) #if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL)) out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE); out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL); @@ -106,6 +81,145 @@ void cpu_init_f(void) out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL); out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK); #endif +} + +/* + * Breath some life into the CPU... + * + * Set up the memory map, + * initialize a bunch of registers, + * initialize the UPM's + */ +void cpu_init_f(void) +{ + gpio_t *gpio = (gpio_t *) MMAP_GPIO; + +#ifdef CONFIG_MCF5441x + scm_t *scm = (scm_t *) MMAP_SCM; + pm_t *pm = (pm_t *) MMAP_PM; + + /* Disable Switch */ + *(unsigned long *)(MMAP_L2_SW0 + 0x00000024) = 0; + + /* Disable core watchdog */ + out_be16(&scm->cwcr, 0); + out_8(&gpio->par_fbctl, + GPIO_PAR_FBCTL_ALE_FB_ALE | GPIO_PAR_FBCTL_OE_FB_OE | + GPIO_PAR_FBCTL_FBCLK | GPIO_PAR_FBCTL_RW | + GPIO_PAR_FBCTL_TA_TA); + out_8(&gpio->par_be, + GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | + GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0); + + /* eDMA */ + out_8(&pm->pmcr0, 17); + + /* INTR0 - INTR2 */ + out_8(&pm->pmcr0, 18); + out_8(&pm->pmcr0, 19); + out_8(&pm->pmcr0, 20); + + /* I2C */ + out_8(&pm->pmcr0, 22); + out_8(&pm->pmcr1, 4); + out_8(&pm->pmcr1, 7); + + /* DTMR0 - DTMR3*/ + out_8(&pm->pmcr0, 28); + out_8(&pm->pmcr0, 29); + out_8(&pm->pmcr0, 30); + out_8(&pm->pmcr0, 31); + + /* PIT0 - PIT3 */ + out_8(&pm->pmcr0, 32); + out_8(&pm->pmcr0, 33); + out_8(&pm->pmcr0, 34); + out_8(&pm->pmcr0, 35); + + /* Edge Port */ + out_8(&pm->pmcr0, 36); + out_8(&pm->pmcr0, 37); + + /* USB OTG */ + out_8(&pm->pmcr0, 44); + /* USB Host */ + out_8(&pm->pmcr0, 45); + + /* ESDHC */ + out_8(&pm->pmcr0, 51); + + /* ENET0 - ENET1 */ + out_8(&pm->pmcr0, 53); + out_8(&pm->pmcr0, 54); + + /* NAND */ + out_8(&pm->pmcr0, 63); + +#ifdef CONFIG_SYS_I2C_0 + out_8(&gpio->par_cani2c, 0xF0); + /* I2C0 pull up */ + out_be16(&gpio->pcr_b, 0x003C); + /* I2C0 max speed */ + out_8(&gpio->srcr_cani2c, 0x03); +#endif +#ifdef CONFIG_SYS_I2C_2 + /* I2C2 */ + out_8(&gpio->par_ssi0h, 0xA0); + /* I2C2, UART7 */ + out_8(&gpio->par_ssi0h, 0xA8); + /* UART7 */ + out_8(&gpio->par_ssi0l, 0x2); + /* UART8, UART9 */ + out_8(&gpio->par_cani2c, 0xAA); + /* UART4, UART0 */ + out_8(&gpio->par_uart0, 0xAF); + /* UART5, UART1 */ + out_8(&gpio->par_uart1, 0xAF); + /* UART6, UART2 */ + out_8(&gpio->par_uart2, 0xAF); + /* I2C2 pull up */ + out_be16(&gpio->pcr_h, 0xF000); +#endif +#ifdef CONFIG_SYS_I2C_5 + /* I2C5 */ + out_8(&gpio->par_uart1, 0x0A); + /* I2C5 pull up */ + out_be16(&gpio->pcr_e, 0x0003); + out_be16(&gpio->pcr_f, 0xC000); +#endif + + /* Lowest slew rate for UART0,1,2 */ + out_8(&gpio->srcr_uart, 0x00); +#endif /* CONFIG_MCF5441x */ + +#ifdef CONFIG_MCF5445x + scm1_t *scm1 = (scm1_t *) MMAP_SCM1; + + out_be32(&scm1->mpr, 0x77777777); + out_be32(&scm1->pacra, 0); + out_be32(&scm1->pacrb, 0); + out_be32(&scm1->pacrc, 0); + out_be32(&scm1->pacrd, 0); + out_be32(&scm1->pacre, 0); + out_be32(&scm1->pacrf, 0); + out_be32(&scm1->pacrg, 0); + + /* FlexBus */ + out_8(&gpio->par_be, + GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 | + GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0); + out_8(&gpio->par_fbctl, + GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA | + GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS); + +#ifdef CONFIG_FSL_I2C + out_be16(&gpio->par_feci2c, + GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA); +#endif +#endif /* CONFIG_MCF5445x */ + + /* FlexBus Chipselect */ + init_fbcs(); /* * now the flash base address is no longer at 0 (Newer ColdFire family @@ -115,11 +229,6 @@ void cpu_init_f(void) if (CONFIG_SYS_CS0_BASE != 0) setvbr(CONFIG_SYS_CS0_BASE); -#ifdef CONFIG_FSL_I2C - out_be16(&gpio->par_feci2c, - GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA); -#endif - icache_enable(); } @@ -142,9 +251,95 @@ int cpu_init_r(void) void uart_port_conf(int port) { gpio_t *gpio = (gpio_t *) MMAP_GPIO; +#ifdef CONFIG_MCF5441x + pm_t *pm = (pm_t *) MMAP_PM; +#endif /* Setup Ports: */ switch (port) { +#ifdef CONFIG_MCF5441x + case 0: + /* UART0 */ + out_8(&pm->pmcr0, 24); + clrbits_8(&gpio->par_uart0, + ~(GPIO_PAR_UART0_U0RXD_MASK | GPIO_PAR_UART0_U0TXD_MASK)); + setbits_8(&gpio->par_uart0, + GPIO_PAR_UART0_U0RXD_U0RXD | GPIO_PAR_UART0_U0TXD_U0TXD); + break; + case 1: + /* UART1 */ + out_8(&pm->pmcr0, 25); + clrbits_8(&gpio->par_uart1, + ~(GPIO_PAR_UART1_U1RXD_MASK | GPIO_PAR_UART1_U1TXD_MASK)); + setbits_8(&gpio->par_uart1, + GPIO_PAR_UART1_U1RXD_U1RXD | GPIO_PAR_UART1_U1TXD_U1TXD); + break; + case 2: + /* UART2 */ + out_8(&pm->pmcr0, 26); + clrbits_8(&gpio->par_uart2, + ~(GPIO_PAR_UART2_U2RXD_MASK | GPIO_PAR_UART2_U2TXD_MASK)); + setbits_8(&gpio->par_uart2, + GPIO_PAR_UART2_U2RXD_U2RXD | GPIO_PAR_UART2_U2TXD_U2TXD); + break; + case 3: + /* UART3 */ + out_8(&pm->pmcr0, 27); + clrbits_8(&gpio->par_dspi0, + ~(GPIO_PAR_DSPI0_SIN_MASK | GPIO_PAR_DSPI0_SOUT_MASK)); + setbits_8(&gpio->par_dspi0, + GPIO_PAR_DSPI0_SIN_U3RXD | GPIO_PAR_DSPI0_SOUT_U3TXD); + break; + case 4: + /* UART4 */ + out_8(&pm->pmcr1, 24); + clrbits_8(&gpio->par_uart0, + ~(GPIO_PAR_UART0_U0CTS_MASK | GPIO_PAR_UART0_U0RTS_MASK)); + setbits_8(&gpio->par_uart0, + GPIO_PAR_UART0_U0CTS_U4TXD | GPIO_PAR_UART0_U0RTS_U4RXD); + break; + case 5: + /* UART5 */ + out_8(&pm->pmcr1, 25); + clrbits_8(&gpio->par_uart1, + ~(GPIO_PAR_UART1_U1CTS_MASK | GPIO_PAR_UART1_U1RTS_MASK)); + setbits_8(&gpio->par_uart1, + GPIO_PAR_UART1_U1CTS_U5TXD | GPIO_PAR_UART1_U1RTS_U5RXD); + break; + case 6: + /* UART6 */ + out_8(&pm->pmcr1, 26); + clrbits_8(&gpio->par_uart2, + ~(GPIO_PAR_UART2_U2CTS_MASK | GPIO_PAR_UART2_U2RTS_MASK)); + setbits_8(&gpio->par_uart2, + GPIO_PAR_UART2_U2CTS_U6TXD | GPIO_PAR_UART2_U2RTS_U6RXD); + break; + case 7: + /* UART7 */ + out_8(&pm->pmcr1, 27); + clrbits_8(&gpio->par_ssi0h, ~GPIO_PAR_SSI0H_RXD_MASK); + clrbits_8(&gpio->par_ssi0l, ~GPIO_PAR_SSI0L_BCLK_MASK); + setbits_8(&gpio->par_ssi0h, GPIO_PAR_SSI0H_FS_U7TXD); + setbits_8(&gpio->par_ssi0l, GPIO_PAR_SSI0L_BCLK_U7RXD); + break; + case 8: + /* UART8 */ + out_8(&pm->pmcr0, 28); + clrbits_8(&gpio->par_cani2c, + ~(GPIO_PAR_CANI2C_I2C0SCL_MASK | GPIO_PAR_CANI2C_I2C0SDA_MASK)); + setbits_8(&gpio->par_cani2c, + GPIO_PAR_CANI2C_I2C0SCL_U8TXD | GPIO_PAR_CANI2C_I2C0SDA_U8RXD); + break; + case 9: + /* UART9 */ + out_8(&pm->pmcr1, 29); + clrbits_8(&gpio->par_cani2c, + ~(GPIO_PAR_CANI2C_CAN1TX_MASK | GPIO_PAR_CANI2C_CAN1RX_MASK)); + setbits_8(&gpio->par_cani2c, + GPIO_PAR_CANI2C_CAN1TX_U9TXD | GPIO_PAR_CANI2C_CAN1RX_U9RXD); + break; +#endif +#ifdef CONFIG_MCF5445x case 0: clrbits_8(&gpio->par_uart, GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD); @@ -177,6 +372,7 @@ void uart_port_conf(int port) GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD); #endif break; +#endif /* CONFIG_MCF5445x */ } } @@ -186,6 +382,7 @@ int fecpin_setclear(struct eth_device *dev, int setclear) gpio_t *gpio = (gpio_t *) MMAP_GPIO; struct fec_info_s *info = (struct fec_info_s *)dev->priv; +#ifdef CONFIG_MCF5445x if (setclear) { #ifdef CONFIG_SYS_FEC_NO_SHARED_PHY if (info->iobase == CONFIG_SYS_FEC0_IOBASE) @@ -223,6 +420,21 @@ int fecpin_setclear(struct eth_device *dev, int setclear) #endif } } +#endif /* CONFIG_MCF5445x */ + +#ifdef CONFIG_MCF5441x + if (setclear) { + out_8(&gpio->par_fec, 0x03); + out_8(&gpio->srcr_fec, 0x0F); + clrsetbits_8(&gpio->par_simp0h, ~GPIO_PAR_SIMP0H_DAT_MASK, + GPIO_PAR_SIMP0H_DAT_GPIO); + clrsetbits_8(&gpio->pddr_g, ~GPIO_PDDR_G4_MASK, + GPIO_PDDR_G4_OUTPUT); + clrbits_8(&gpio->podr_g, ~GPIO_PODR_G4_MASK); + + } else + clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC_MASK); +#endif return 0; } #endif @@ -232,10 +444,24 @@ void cfspi_port_conf(void) { gpio_t *gpio = (gpio_t *) MMAP_GPIO; +#ifdef CONFIG_MCF5445x out_8(&gpio->par_dspi, GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT | GPIO_PAR_DSPI_SCK_SCK); +#endif + +#ifdef CONFIG_MCF5441x + pm_t *pm = (pm_t *) MMAP_PM; + + out_8(&gpio->par_dspi0, + GPIO_PAR_DSPI0_SIN_DSPI0SIN | GPIO_PAR_DSPI0_SOUT_DSPI0SOUT | + GPIO_PAR_DSPI0_SCK_DSPI0SCK); + out_8(&gpio->srcr_dspiow, 3); + + /* DSPI0 */ + out_8(&pm->pmcr0, 23); +#endif } int cfspi_claim_bus(uint bus, uint cs) @@ -249,6 +475,7 @@ int cfspi_claim_bus(uint bus, uint cs) /* Clear FIFO and resume transfer */ clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF); +#ifdef CONFIG_MCF5445x switch (cs) { case 0: clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0); @@ -271,6 +498,20 @@ int cfspi_claim_bus(uint bus, uint cs) setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5); break; } +#endif + +#ifdef CONFIG_MCF5441x + switch (cs) { + case 0: + clrbits_8(&gpio->par_dspi0, ~GPIO_PAR_DSPI0_PCS0_MASK); + setbits_8(&gpio->par_dspi0, GPIO_PAR_DSPI0_PCS0_DSPI0PCS0); + break; + case 1: + clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1); + setbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1); + break; + } +#endif return 0; } @@ -283,6 +524,7 @@ void cfspi_release_bus(uint bus, uint cs) /* Clear FIFO */ clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF); +#ifdef CONFIG_MCF5445x switch (cs) { case 0: clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0); @@ -300,5 +542,11 @@ void cfspi_release_bus(uint bus, uint cs) clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5); break; } +#endif + +#ifdef CONFIG_MCF5441x + if (cs == 1) + clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1); +#endif } #endif diff --git a/arch/m68k/cpu/mcf5445x/speed.c b/arch/m68k/cpu/mcf5445x/speed.c index 073b7efafb..55d1c488a3 100644 --- a/arch/m68k/cpu/mcf5445x/speed.c +++ b/arch/m68k/cpu/mcf5445x/speed.c @@ -57,8 +57,10 @@ void clock_enter_limp(int lpdiv) /* Round divider down to nearest power of two */ for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ; +#ifdef CONFIG_MCF5445x /* Apply the divider to the system clock */ clrsetbits_be16(&ccm->cdr, 0x0f00, CCM_CDR_LPDIV(i)); +#endif /* Enable Limp Mode */ setbits_be16(&ccm->misccr, CCM_MISCCR_LIMP); @@ -81,19 +83,76 @@ void clock_exit_limp(void) ; } -/* - * get_clocks() fills in gd->cpu_clock and gd->bus_clk - */ -int get_clocks(void) +#ifdef CONFIG_MCF5441x +void setup_5441x_clocks(void) { + ccm_t *ccm = (ccm_t *)MMAP_CCM; + pll_t *pll = (pll_t *)MMAP_PLL; + int temp, vco = 0, bootmod_ccr, pdr; + + bootmod_ccr = (in_be16(&ccm->ccr) & CCM_CCR_BOOTMOD) >> 14; + + switch (bootmod_ccr) { + case 0: + out_be32(&pll->pcr, 0x00000013); + out_be32(&pll->pdr, 0x00e70c61); + clock_exit_limp(); + break; + case 2: + break; + case 3: + break; + } + + /*Change frequency for Modelo SER1 USB host*/ +#ifdef CONFIG_LOW_MCFCLK + temp = in_be32(&pll->pcr); + temp &= ~0x3f; + temp |= 5; + out_be32(&pll->pcr, temp); + + temp = in_be32(&pll->pdr); + temp &= ~0x001f0000; + temp |= 0x00040000; + out_be32(&pll->pdr, temp); + __asm__("tpf"); +#endif + setbits_be16(&ccm->misccr2, 0x02); + + vco = ((in_be32(&pll->pcr) & PLL_CR_FBKDIV_BITS) + 1) * + CONFIG_SYS_INPUT_CLKSRC; + gd->vco_clk = vco; + + gd->inp_clk = CONFIG_SYS_INPUT_CLKSRC; /* Input clock */ + + pdr = in_be32(&pll->pdr); + temp = (pdr & PLL_DR_OUTDIV1_BITS) + 1; + gd->cpu_clk = vco / temp; /* cpu clock */ + gd->flb_clk = vco / temp; /* FlexBus clock */ + gd->flb_clk >>= 1; + if (in_be16(ccm->misccr2) & 2) /* fsys/4 */ + gd->flb_clk >>= 1; + + temp = ((pdr & PLL_DR_OUTDIV2_BITS) >> 5) + 1; + gd->bus_clk = vco / temp; /* bus clock */ + +} +#endif + +#ifdef CONFIG_MCF5445x +void setup_5445x_clocks(void) +{ ccm_t *ccm = (ccm_t *)MMAP_CCM; pll_t *pll = (pll_t *)MMAP_PLL; int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 }; int pllmult_pci[] = { 12, 6, 16, 8 }; - int vco = 0, bPci, temp, fbtemp, pcrvalue; + int vco = 0, temp, fbtemp, pcrvalue; int *pPllmult = NULL; u16 fbpll_mask; +#ifdef CONFIG_PCI + int bPci; +#endif #ifdef CONFIG_M54455EVB u8 *cpld = (u8 *)(CONFIG_SYS_CS2_BASE + 3); @@ -105,14 +164,16 @@ int get_clocks(void) ((in_be16(&ccm->ccr) & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) { pPllmult = &pllmult_pci[0]; fbpll_mask = 3; /* 11b */ +#ifdef CONFIG_PCI bPci = 1; +#endif } else { pPllmult = &pllmult_nopci[0]; fbpll_mask = 7; /* 111b */ #ifdef CONFIG_PCI gd->pci_clk = 0; -#endif bPci = 0; +#endif } #ifdef CONFIG_M54455EVB @@ -215,6 +276,22 @@ int get_clocks(void) #ifdef CONFIG_FSL_I2C gd->i2c1_clk = gd->bus_clk; #endif +} +#endif + +/* get_clocks() fills in gd->cpu_clock and gd->bus_clk */ +int get_clocks(void) +{ +#ifdef CONFIG_MCF5441x + setup_5441x_clocks(); +#endif +#ifdef CONFIG_MCF5445x + setup_5445x_clocks(); +#endif + +#ifdef CONFIG_FSL_I2C + gd->i2c1_clk = gd->bus_clk; +#endif return (0); } diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S index 99060141d8..5fc944d2f3 100644 --- a/arch/m68k/cpu/mcf5445x/start.S +++ b/arch/m68k/cpu/mcf5445x/start.S @@ -2,6 +2,9 @@ * Copyright (C) 2003 Josef Baumgartner <josef.baumgartner@telex.de> * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com> * + * Copyright 2010-2012 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * * See file CREDITS for list of people who contributed to this * project. * @@ -21,8 +24,10 @@ * MA 02111-1307 USA */ +#include <common.h> #include <asm-offsets.h> #include <config.h> +#include <timestamp.h> #include "version.h" #include <asm/cache.h> @@ -43,8 +48,9 @@ addl #60,%sp; /* space for 15 regs */ \ rte; -#if defined(CONFIG_CF_SBF) +#if defined(CONFIG_SERIAL_BOOT) #define ASM_DRAMINIT (asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) +#define ASM_DRAMINIT_N (asm_dram_init - TEXT_BASE) #define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) #endif @@ -55,10 +61,15 @@ * These vectors are to catch any un-intended traps. */ _vectors: -#if defined(CONFIG_CF_SBF) +#if defined(CONFIG_SERIAL_BOOT) INITSP: .long 0 /* Initial SP */ +#ifdef CONFIG_CF_SBF INITPC: .long ASM_DRAMINIT /* Initial PC */ +#endif +#ifdef CONFIG_SYS_NAND_BOOT +INITPC: .long ASM_DRAMINIT_N /* Initial PC */ +#endif #else @@ -95,7 +106,7 @@ vector1D: .long _FAULT /* Autovector Level 5 */ vector1E: .long _FAULT /* Autovector Level 6 */ vector1F: .long _FAULT /* Autovector Level 7 */ -#if !defined(CONFIG_CF_SBF) +#if !defined(CONFIG_SERIAL_BOOT) /* TRAP #0 - #15 */ vector20_2F: @@ -138,16 +149,26 @@ vector192_255: .long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT #endif -#if defined(CONFIG_CF_SBF) +#if defined(CONFIG_SERIAL_BOOT) /* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */ asm_sbf_img_hdr: .long 0x00000000 /* checksum, not yet implemented */ - .long 0x00030000 /* image length */ + .long 0x00040000 /* image length */ .long CONFIG_SYS_TEXT_BASE /* image to be relocated at */ asm_dram_init: move.w #0x2700,%sr /* Mask off Interrupt */ +#ifdef CONFIG_SYS_NAND_BOOT + /* for assembly stack */ + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 + + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp + clr.l %sp@- +#endif + +#ifdef CONFIG_CF_SBF move.l #CONFIG_SYS_INIT_RAM_ADDR, %d0 movec %d0, %VBR @@ -180,7 +201,90 @@ asm_dram_init: move.l #(CONFIG_SYS_CS0_CTRL), (%a1) move.l #0xFC008004, %a1 move.l #(CONFIG_SYS_CS0_MASK), (%a1) +#endif /* CONFIG_CF_SBF */ + +#ifdef CONFIG_MCF5441x + /* TC: enable all peripherals, + in the future only enable certain peripherals */ + move.l #0xFC04002D, %a1 +#if defined(CONFIG_CF_SBF) + move.b #23, (%a1) /* dspi */ +#endif + move.b #46, (%a1) /* DDR */ + + /* slew settings */ + move.l #0xEC094060, %a1 + move.b #0, (%a1) + + /* use vco instead of cpu*2 clock for ddr clock */ + move.l #0xEC09001A, %a1 + move.w #0xE01D, (%a1) + + /* DDR settings */ + move.l #0xFC0B8180, %a1 + move.l #0x00000000, (%a1) + move.l #0x40000000, (%a1) + + move.l #0xFC0B81AC, %a1 + move.l #0x01030203, (%a1) + + move.l #0xFC0B8000, %a1 + move.l #0x01010101, (%a1)+ /* 0x00 */ + move.l #0x00000101, (%a1)+ /* 0x04 */ + move.l #0x01010100, (%a1)+ /* 0x08 */ + move.l #0x01010000, (%a1)+ /* 0x0C */ + move.l #0x00010101, (%a1)+ /* 0x10 */ + move.l #0xFC0B8018, %a1 + move.l #0x00010100, (%a1)+ /* 0x18 */ + move.l #0x00000001, (%a1)+ /* 0x1C */ + move.l #0x01000001, (%a1)+ /* 0x20 */ + move.l #0x00000100, (%a1)+ /* 0x24 */ + move.l #0x00010001, (%a1)+ /* 0x28 */ + move.l #0x00000200, (%a1)+ /* 0x2C */ + move.l #0x01000002, (%a1)+ /* 0x30 */ + move.l #0x00000000, (%a1)+ /* 0x34 */ + move.l #0x00000100, (%a1)+ /* 0x38 */ + move.l #0x02000100, (%a1)+ /* 0x3C */ + move.l #0x02000407, (%a1)+ /* 0x40 */ + move.l #0x02030007, (%a1)+ /* 0x44 */ + move.l #0x02000100, (%a1)+ /* 0x48 */ + move.l #0x0A030203, (%a1)+ /* 0x4C */ + move.l #0x00020708, (%a1)+ /* 0x50 */ + move.l #0x00050008, (%a1)+ /* 0x54 */ + move.l #0x04030002, (%a1)+ /* 0x58 */ + move.l #0x00000004, (%a1)+ /* 0x5C */ + move.l #0x020A0000, (%a1)+ /* 0x60 */ + move.l #0x0C00000E, (%a1)+ /* 0x64 */ + move.l #0x00002004, (%a1)+ /* 0x68 */ + move.l #0x00000000, (%a1)+ /* 0x6C */ + move.l #0x00100010, (%a1)+ /* 0x70 */ + move.l #0x00100010, (%a1)+ /* 0x74 */ + move.l #0x00000000, (%a1)+ /* 0x78 */ + move.l #0x07990000, (%a1)+ /* 0x7C */ + move.l #0xFC0B80A0, %a1 + move.l #0x00000000, (%a1)+ /* 0xA0 */ + move.l #0x00C80064, (%a1)+ /* 0xA4 */ + move.l #0x44520002, (%a1)+ /* 0xA8 */ + move.l #0x00C80023, (%a1)+ /* 0xAC */ + move.l #0xFC0B80B4, %a1 + move.l #0x0000C350, (%a1) /* 0xB4 */ + move.l #0xFC0B80E0, %a1 + move.l #0x04000000, (%a1)+ /* 0xE0 */ + move.l #0x03000304, (%a1)+ /* 0xE4 */ + move.l #0x40040000, (%a1)+ /* 0xE8 */ + move.l #0xC0004004, (%a1)+ /* 0xEC */ + move.l #0x0642C000, (%a1)+ /* 0xF0 */ + move.l #0x00000642, (%a1)+ /* 0xF4 */ + move.l #0xFC0B8024, %a1 + tpf + move.l #0x01000100, (%a1) /* 0x24 */ + + move.l #0x2000, %d1 + jsr asm_delay +#endif /* CONFIG_MCF5441x */ + +#ifdef CONFIG_MCF5445x /* Dram Initialization a1, a2, and d0 */ /* mscr sdram */ move.l #0xFC0A4074, %a1 @@ -203,7 +307,9 @@ dramsz_loop: add.l #1, %d1 cmp.l #1, %d2 bne dramsz_loop - +#ifdef CONFIG_SYS_NAND_BOOT + beq asm_nand_chk_status +#endif /* SDRAM Chip 0 and 1 */ move.l #(CONFIG_SYS_SDRAM_BASE), (%a1) or.l %d1, (%a1) @@ -275,7 +381,9 @@ dramsz_loop: move.l #2000, %d1 jsr asm_delay +#endif /* CONFIG_MCF5445x */ +#ifdef CONFIG_CF_SBF /* * DSPI Initialization * a0 - general, sram - 0x80008000 - 32, see M54455EVB.h @@ -286,15 +394,28 @@ dramsz_loop: */ /* Enable pins for DSPI mode - chip-selects are enabled later */ asm_dspi_init: +#ifdef CONFIG_MCF5441x + move.l #0xEC09404E, %a1 + move.l #0xEC09404F, %a2 + move.b #0xFF, (%a1) + move.b #0x80, (%a2) +#endif + +#ifdef CONFIG_MCF5445x move.l #0xFC0A4063, %a0 move.b #0x7F, (%a0) - +#endif /* Configure DSPI module */ move.l #0xFC05C000, %a0 move.l #0x80FF0C00, (%a0) /* Master, clear TX/RX FIFO */ move.l #0xFC05C00C, %a0 +#ifdef CONFIG_MCF5441x + move.l #0x3E000016, (%a0) +#endif +#ifdef CONFIG_MCF5445x move.l #0x3E000011, (%a0) +#endif move.l #0xFC05C034, %a2 /* dtfr */ move.l #0xFC05C03B, %a3 /* drfr */ @@ -379,19 +500,148 @@ asm_dspi_rd_status: move.b (%a3), %d1 rts +#endif /* CONFIG_CF_SBF */ + +#ifdef CONFIG_SYS_NAND_BOOT + /* copy 4 boot pages to dram as soon as possible */ + /* each page is 996 bytes (1056 total with 60 ECC bytes */ + move.l #0x00000000, %a1 /* src */ + move.l #TEXT_BASE, %a2 /* dst */ + move.l #0x3E0, %d0 /* sz in long */ + +asm_boot_nand_copy: + move.l (%a1)+, (%a2)+ + subq.l #1, %d0 + bne asm_boot_nand_copy + + /* jump to memory and execute */ + move.l #(asm_nand_init), %a0 + jmp (%a0) + +asm_nand_init: + /* exit nand boot-mode */ + move.l #0xFC0FFF30, %a1 + or.l #0x00000040, %d1 + move.l %d1, (%a1) + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(CACR_STATUS), %a1 /* CACR */ + move.l #(ICACHE_STATUS), %a2 /* icache */ + move.l #(DCACHE_STATUS), %a3 /* dcache */ + move.l %d0, (%a1) + move.l %d0, (%a2) + move.l %d0, (%a3) + + /* invalidate and disable cache */ + move.l #0x01004100, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + movec %d0, %ACR2 + movec %d0, %ACR3 + + /* Must disable global address */ + move.l #0xFC008000, %a1 + move.l #(CONFIG_SYS_CS0_BASE), (%a1) + move.l #0xFC008008, %a1 + move.l #(CONFIG_SYS_CS0_CTRL), (%a1) + move.l #0xFC008004, %a1 + move.l #(CONFIG_SYS_CS0_MASK), (%a1) + + /* NAND port configuration */ + move.l #0xEC094048, %a1 + move.b #0xFD, (%a1)+ + move.b #0x5F, (%a1)+ + move.b #0x04, (%a1)+ + + /* reset nand */ + move.l #0xFC0FFF38, %a1 /* isr */ + move.l #0x000e0000, (%a1) + move.l #0xFC0FFF08, %a2 + move.l #0x00000000, (%a2)+ /* car */ + move.l #0x11000000, (%a2)+ /* rar */ + move.l #0x00000000, (%a2)+ /* rpt */ + move.l #0x00000000, (%a2)+ /* rai */ + move.l #0xFC0FFF2c, %a2 /* cfg */ + move.l #0x00000000, (%a2)+ /* secsz */ + move.l #0x000e0681, (%a2)+ + move.l #0xFC0FFF04, %a2 /* cmd2 */ + move.l #0xFF404001, (%a2) + move.l #0x000e0000, (%a1) + + move.l #0x2000, %d1 + jsr asm_delay + + /* setup nand */ + move.l #0xFC0FFF00, %a1 + move.l #0x30700000, (%a1)+ /* cmd1 */ + move.l #0x007EF000, (%a1)+ /* cmd2 */ + + move.l #0xFC0FFF2C, %a1 + move.l #0x00000841, (%a1)+ /* secsz */ + move.l #0x000e0681, (%a1)+ /* cfg */ + + move.l #100, %d4 /* 100 pages ~200KB */ + move.l #4, %d2 /* start at 4 */ + move.l #0xFC0FFF04, %a0 /* cmd2 */ + move.l #0xFC0FFF0C, %a1 /* rar */ + move.l #(TEXT_BASE + 0xF80), %a2 /* dst */ + +asm_nand_read: + move.l #0x11000000, %d0 /* rar */ + or.l %d2, %d0 + move.l %d0, (%a1) + add.l #1, %d2 + + move.l (%a0), %d0 /* cmd2 */ + or.l #1, %d0 + move.l %d0, (%a0) + + move.l #0x200, %d1 + jsr asm_delay + +asm_nand_chk_status: + move.l #0xFC0FFF38, %a4 /* isr */ + move.l (%a4), %d0 + and.l #0x40000000, %d0 + tst.l %d0 + beq asm_nand_chk_status + + move.l #0xFC0FFF38, %a4 /* isr */ + move.l (%a4), %d0 + or.l #0x000E0000, %d0 + move.l %d0, (%a4) + + move.l #0x200, %d3 + move.l #0xFC0FC000, %a3 /* buf 1 */ +asm_nand_copy: + move.l (%a3)+, (%a2)+ + subq.l #1, %d3 + bgt asm_nand_copy + + subq.l #1, %d4 + bgt asm_nand_read + + /* jump to memory and execute */ + move.l #(TEXT_BASE + 0x400), %a0 + jmp (%a0) + +#endif /* CONFIG_SYS_NAND_BOOT */ asm_delay: nop subq.l #1, %d1 bne asm_delay rts -#endif /* CONFIG_CF_SBF */ +#endif /* CONFIG_CF_SBF || CONFIG_NAND_U_BOOT */ .text . = 0x400 .globl _start _start: -#if !defined(CONFIG_CF_SBF) +#if !defined(CONFIG_SERIAL_BOOT) nop nop move.w #0x2700,%sr /* Mask off Interrupt */ @@ -418,12 +668,15 @@ _start: movec %d0, %ACR1 movec %d0, %ACR2 movec %d0, %ACR3 +#else + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 +#endif /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp clr.l %sp@- -#endif move.l #__got_start, %a5 /* put relocation table address to a5 */ diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S index ec65cae3d8..d99747b7fa 100644 --- a/arch/m68k/cpu/mcf547x_8x/start.S +++ b/arch/m68k/cpu/mcf547x_8x/start.S @@ -164,8 +164,8 @@ _start: move.l #__got_start, %a5 /* put relocation table address to a5 */ - bsr cpu_init_f /* run low-level CPU init code (from flash) */ - bsr board_init_f /* run low-level board init code (from flash) */ + jbsr cpu_init_f /* run low-level CPU init code (from flash) */ + jbsr board_init_f /* run low-level board init code (from flash) */ /* board_init_f() does not return */ diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h index 5c9bb30835..f9e2d15f43 100644 --- a/arch/m68k/include/asm/cache.h +++ b/arch/m68k/include/asm/cache.h @@ -1,7 +1,7 @@ /* * ColdFire cache * - * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. + * Copyright 2004-2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -37,10 +37,9 @@ #if defined(CONFIG_MCF547x_8x) || defined(CONFIG_MCF5445x) #define CONFIG_CF_V4 -#if defined(CONFIG_MCF5441x) +#elif defined(CONFIG_MCF5441x) #define CONFIG_CF_V4E /* Four Extra ACRn */ #endif -#endif /* ***** CACR ***** */ /* V2 Core */ @@ -87,7 +86,7 @@ #endif /* CONFIG_CF_V3 */ /* V4 Core */ -#ifdef CONFIG_CF_V4 +#if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E) #define CF_CACR_DEC (1 << 31) #define CF_CACR_DW (1 << 30) @@ -113,7 +112,7 @@ #define CF_CACR_IDSP (1 << 7) #define CF_CACR_EUSP (1 << 5) -#ifdef CONFIG_MCF5445x +#if defined(CONFIG_MCF5445x) || defined(CONFIG_MCF5441x) #define CF_CACR_IVO (1 << 20) #define CF_CACR_SPA (1 << 14) #else @@ -148,7 +147,7 @@ #endif /* CONFIG_CF_V2 */ /* V4 Core */ -#ifdef CONFIG_CF_V4 +#if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E) #define CF_ACR_AMM (1 << 10) #define CF_ACR_SP (1 << 3) #endif /* CONFIG_CF_V4 */ diff --git a/arch/m68k/include/asm/global_data.h b/arch/m68k/include/asm/global_data.h index cd55b83c52..0cdb11cf99 100644 --- a/arch/m68k/include/asm/global_data.h +++ b/arch/m68k/include/asm/global_data.h @@ -34,7 +34,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long bus_clk; #ifdef CONFIG_PCI diff --git a/arch/m68k/include/asm/immap.h b/arch/m68k/include/asm/immap.h index e83ce08d57..2aab463a90 100644 --- a/arch/m68k/include/asm/immap.h +++ b/arch/m68k/include/asm/immap.h @@ -1,7 +1,7 @@ /* * ColdFire Internal Memory Map and Defines * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright 2004-2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -318,6 +318,47 @@ #define CONFIG_SYS_NUM_IRQS (128) #endif /* CONFIG_M5329 && CONFIG_M5373 */ +#if defined(CONFIG_M54418) +#include <asm/immap_5441x.h> +#include <asm/m5441x.h> + +#define CONFIG_SYS_FEC0_IOBASE (MMAP_FEC0) +#define CONFIG_SYS_FEC1_IOBASE (MMAP_FEC1) + +#if (CONFIG_SYS_UART_PORT < 4) +#define CONFIG_SYS_UART_BASE (MMAP_UART0 + \ + (CONFIG_SYS_UART_PORT * 0x4000)) +#else +#define CONFIG_SYS_UART_BASE (MMAP_UART4 + \ + ((CONFIG_SYS_UART_PORT - 4) * 0x4000)) +#endif + +#define MMAP_DSPI MMAP_DSPI0 +#define CONFIG_SYS_MCFRTC_BASE (MMAP_RTC) + +/* Timer */ +#ifdef CONFIG_MCFTMR +#define CONFIG_SYS_UDELAY_BASE (MMAP_DTMR0) +#define CONFIG_SYS_TMR_BASE (MMAP_DTMR1) +#define CONFIG_SYS_TMRPND_REG (((int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0) +#define CONFIG_SYS_TMRINTR_NO (INT0_HI_DTMR1) +#define CONFIG_SYS_TMRINTR_MASK (INTC_IPRH_INT33) +#define CONFIG_SYS_TMRINTR_PEND (CONFIG_SYS_TMRINTR_MASK) +#define CONFIG_SYS_TMRINTR_PRI (6) +#define CONFIG_SYS_TIMER_PRESCALER (((gd->bus_clk / 1000000) - 1) << 8) +#endif + +#ifdef CONFIG_MCFPIT +#define CONFIG_SYS_UDELAY_BASE (MMAP_PIT0) +#define CONFIG_SYS_PIT_BASE (MMAP_PIT1) +#define CONFIG_SYS_PIT_PRESCALE (6) +#endif + +#define CONFIG_SYS_INTR_BASE (MMAP_INTC0) +#define CONFIG_SYS_NUM_IRQS (128) + +#endif /* CONFIG_M54418 */ + #if defined(CONFIG_M54451) || defined(CONFIG_M54455) #include <asm/immap_5445x.h> #include <asm/m5445x.h> diff --git a/arch/m68k/include/asm/immap_5441x.h b/arch/m68k/include/asm/immap_5441x.h new file mode 100644 index 0000000000..300f4d2868 --- /dev/null +++ b/arch/m68k/include/asm/immap_5441x.h @@ -0,0 +1,387 @@ +/* + * MCF5441x Internal Memory Map + * + * Copyright 2010-2012 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __IMMAP_5441X__ +#define __IMMAP_5441X__ + +/* Module Base Addresses */ +#define MMAP_XBS 0xFC004000 +#define MMAP_FBCS 0xFC008000 +#define MMAP_CAN0 0xFC020000 +#define MMAP_CAN1 0xFC024000 +#define MMAP_I2C1 0xFC038000 +#define MMAP_DSPI1 0xFC03C000 +#define MMAP_SCM 0xFC040000 +#define MMAP_PM 0xFC04002C +#define MMAP_EDMA 0xFC044000 +#define MMAP_INTC0 0xFC048000 +#define MMAP_INTC1 0xFC04C000 +#define MMAP_INTC2 0xFC050000 +#define MMAP_IACK 0xFC054000 +#define MMAP_I2C0 0xFC058000 +#define MMAP_DSPI0 0xFC05C000 +#define MMAP_UART0 0xFC060000 +#define MMAP_UART1 0xFC064000 +#define MMAP_UART2 0xFC068000 +#define MMAP_UART3 0xFC06C000 +#define MMAP_DTMR0 0xFC070000 +#define MMAP_DTMR1 0xFC074000 +#define MMAP_DTMR2 0xFC078000 +#define MMAP_DTMR3 0xFC07C000 +#define MMAP_PIT0 0xFC080000 +#define MMAP_PIT1 0xFC084000 +#define MMAP_PIT2 0xFC088000 +#define MMAP_PIT3 0xFC08C000 +#define MMAP_EPORT0 0xFC090000 +#define MMAP_ADC 0xFC094000 +#define MMAP_DAC0 0xFC098000 +#define MMAP_DAC1 0xFC09C000 +#define MMAP_RRTC 0xFC0A8000 +#define MMAP_SIM 0xFC0AC000 +#define MMAP_USBOTG 0xFC0B0000 +#define MMAP_USBEHCI 0xFC0B4000 +#define MMAP_SDRAM 0xFC0B8000 +#define MMAP_SSI0 0xFC0BC000 +#define MMAP_PLL 0xFC0C0000 +#define MMAP_RNG 0xFC0C4000 +#define MMAP_SSI1 0xFC0C8000 +#define MMAP_ESDHC 0xFC0CC000 +#define MMAP_FEC0 0xFC0D4000 +#define MMAP_FEC1 0xFC0D8000 +#define MMAP_L2_SW0 0xFC0DC000 +#define MMAP_L2_SW1 0xFC0E0000 + +#define MMAP_NFC_RAM 0xFC0FC000 +#define MMAP_NFC 0xFC0FF000 + +#define MMAP_1WIRE 0xEC008000 +#define MMAP_I2C2 0xEC010000 +#define MMAP_I2C3 0xEC014000 +#define MMAP_I2C4 0xEC018000 +#define MMAP_I2C5 0xEC01C000 +#define MMAP_DSPI2 0xEC038000 +#define MMAP_DSPI3 0xEC03C000 +#define MMAP_UART4 0xEC060000 +#define MMAP_UART5 0xEC064000 +#define MMAP_UART6 0xEC068000 +#define MMAP_UART7 0xEC06C000 +#define MMAP_UART8 0xEC070000 +#define MMAP_UART9 0xEC074000 +#define MMAP_RCM 0xEC090000 +#define MMAP_CCM 0xEC090000 +#define MMAP_GPIO 0xEC094000 + +#include <asm/coldfire/crossbar.h> +#include <asm/coldfire/dspi.h> +#include <asm/coldfire/edma.h> +#include <asm/coldfire/eport.h> +#include <asm/coldfire/flexbus.h> +#include <asm/coldfire/flexcan.h> +#include <asm/coldfire/intctrl.h> +#include <asm/coldfire/ssi.h> + +/* Serial Boot Facility (SBF) */ +typedef struct sbf { + u8 resv0[0x18]; + u16 sbfsr; /* Serial Boot Facility Status */ + u8 resv1[0x6]; + u16 sbfcr; /* Serial Boot Facility Control */ +} sbf_t; + +/* Reset Controller Module (RCM) */ +typedef struct rcm { + u8 rcr; + u8 rsr; +} rcm_t; + +/* Chip Configuration Module (CCM) */ +typedef struct ccm { + u8 ccm_resv0[0x4]; /* 0x00 */ + u16 ccr; /* 0x04 Chip Configuration */ + u8 resv1[0x2]; /* 0x06 */ + u16 rcon; /* 0x08 Reset Configuration */ + u16 cir; /* 0x0A Chip Identification */ + u8 resv2[0x2]; /* 0x0C */ + u16 misccr; /* 0x0E Miscellaneous Control */ + u16 cdrh; /* 0x10 Clock Divider */ + u16 cdrl; /* 0x12 Clock Divider */ + u16 uocsr; /* 0x14 USB On-the-Go Controller Status */ + u16 uhcsr; /* 0x16 */ + u16 misccr3; /* 0x18 */ + u16 misccr2; /* 0x1A */ + u16 adctsr; /* 0x1C */ + u16 dactsr; /* 0x1E */ + u16 sbfsr; /* 0x20 */ + u16 sbfcr; /* 0x22 */ + u32 fnacr; /* 0x24 */ +} ccm_t; + +/* General Purpose I/O Module (GPIO) */ +typedef struct gpio { + u8 podr_a; /* 0x00 */ + u8 podr_b; /* 0x01 */ + u8 podr_c; /* 0x02 */ + u8 podr_d; /* 0x03 */ + u8 podr_e; /* 0x04 */ + u8 podr_f; /* 0x05 */ + u8 podr_g; /* 0x06 */ + u8 podr_h; /* 0x07 */ + u8 podr_i; /* 0x08 */ + u8 podr_j; /* 0x09 */ + u8 podr_k; /* 0x0A */ + u8 rsvd0; /* 0x0B */ + + u8 pddr_a; /* 0x0C */ + u8 pddr_b; /* 0x0D */ + u8 pddr_c; /* 0x0E */ + u8 pddr_d; /* 0x0F */ + u8 pddr_e; /* 0x10 */ + u8 pddr_f; /* 0x11 */ + u8 pddr_g; /* 0x12 */ + u8 pddr_h; /* 0x13 */ + u8 pddr_i; /* 0x14 */ + u8 pddr_j; /* 0x15 */ + u8 pddr_k; /* 0x16 */ + u8 rsvd1; /* 0x17 */ + + u8 ppdsdr_a; /* 0x18 */ + u8 ppdsdr_b; /* 0x19 */ + u8 ppdsdr_c; /* 0x1A */ + u8 ppdsdr_d; /* 0x1B */ + u8 ppdsdr_e; /* 0x1C */ + u8 ppdsdr_f; /* 0x1D */ + u8 ppdsdr_g; /* 0x1E */ + u8 ppdsdr_h; /* 0x1F */ + u8 ppdsdr_i; /* 0x20 */ + u8 ppdsdr_j; /* 0x21 */ + u8 ppdsdr_k; /* 0x22 */ + u8 rsvd2; /* 0x23 */ + + u8 pclrr_a; /* 0x24 */ + u8 pclrr_b; /* 0x25 */ + u8 pclrr_c; /* 0x26 */ + u8 pclrr_d; /* 0x27 */ + u8 pclrr_e; /* 0x28 */ + u8 pclrr_f; /* 0x29 */ + u8 pclrr_g; /* 0x2A */ + u8 pclrr_h; /* 0x2B */ + u8 pclrr_i; /* 0x2C */ + u8 pclrr_j; /* 0x2D */ + u8 pclrr_k; /* 0x2E */ + u8 rsvd3; /* 0x2F */ + + u16 pcr_a; /* 0x30 */ + u16 pcr_b; /* 0x32 */ + u16 pcr_c; /* 0x34 */ + u16 pcr_d; /* 0x36 */ + u16 pcr_e; /* 0x38 */ + u16 pcr_f; /* 0x3A */ + u16 pcr_g; /* 0x3C */ + u16 pcr_h; /* 0x3E */ + u16 pcr_i; /* 0x40 */ + u16 pcr_j; /* 0x42 */ + u16 pcr_k; /* 0x44 */ + u16 rsvd4; /* 0x46 */ + + u8 par_fbctl; /* 0x48 */ + u8 par_be; /* 0x49 */ + u8 par_cs; /* 0x4A */ + u8 par_cani2c; /* 0x4B */ + u8 par_irqh; /* 0x4C */ + u8 par_irql; /* 0x4D */ + u8 par_dspi0; /* 0x4E */ + u8 par_dspiow; /* 0x4F */ + u8 par_timer; /* 0x50 */ + u8 par_uart2; /* 0x51 */ + u8 par_uart1; /* 0x52 */ + u8 par_uart0; /* 0x53 */ + u8 par_sdhch; /* 0x54 */ + u8 par_sdhcl; /* 0x55 */ + u8 par_simp0h; /* 0x56 */ + u8 par_simp1h; /* 0x57 */ + u8 par_ssi0h; /* 0x58 */ + u8 par_ssi0l; /* 0x59 */ + u8 par_dbg1h; /* 0x5A */ + u8 par_dbg0h; /* 0x5B */ + u8 par_dbgl; /* 0x5C */ + u8 rsvd5; /* 0x5D */ + u8 par_fec; /* 0x5E */ + u8 rsvd6; /* 0x5F */ + + u8 mscr_sdram; /* 0x60 */ + u8 rsvd7[3]; /* 0x61-0x63 */ + + u8 srcr_fb1; /* 0x64 */ + u8 srcr_fb2; /* 0x65 */ + u8 srcr_fb3; /* 0x66 */ + u8 srcr_fb4; /* 0x67 */ + u8 srcr_dspiow; /* 0x68 */ + u8 srcr_cani2c; /* 0x69 */ + u8 srcr_irq; /* 0x6A */ + u8 srcr_timer; /* 0x6B */ + u8 srcr_uart; /* 0x6C */ + u8 srcr_fec; /* 0x6D */ + u8 srcr_sdhc; /* 0x6E */ + u8 srcr_simp0; /* 0x6F */ + u8 srcr_ssi0; /* 0x70 */ + u8 rsvd8[3]; /* 0x71-0x73 */ + + u16 urts_pol; /* 0x74 */ + u16 ucts_pol; /* 0x76 */ + u16 utxd_wom; /* 0x78 */ + u32 urxd_wom; /* 0x7c */ + + u32 hcr1; /* 0x80 */ + u32 hcr0; /* 0x84 */ +} gpio_t; + +/* SDRAM Controller (SDRAMC) */ +typedef struct sdramc { + u32 cr00; /* 0x00 */ + u32 cr01; /* 0x04 */ + u32 cr02; /* 0x08 */ + u32 cr03; /* 0x0C */ + u32 cr04; /* 0x10 */ + u32 cr05; /* 0x14 */ + u32 cr06; /* 0x18 */ + u32 cr07; /* 0x1C */ + + u32 cr08; /* 0x20 */ + u32 cr09; /* 0x24 */ + u32 cr10; /* 0x28 */ + u32 cr11; /* 0x2C */ + u32 cr12; /* 0x30 */ + u32 cr13; /* 0x34 */ + u32 cr14; /* 0x38 */ + u32 cr15; /* 0x3C */ + + u32 cr16; /* 0x40 */ + u32 cr17; /* 0x44 */ + u32 cr18; /* 0x48 */ + u32 cr19; /* 0x4C */ + u32 cr20; /* 0x50 */ + u32 cr21; /* 0x54 */ + u32 cr22; /* 0x58 */ + u32 cr23; /* 0x5C */ + + u32 cr24; /* 0x60 */ + u32 cr25; /* 0x64 */ + u32 cr26; /* 0x68 */ + u32 cr27; /* 0x6C */ + u32 cr28; /* 0x70 */ + u32 cr29; /* 0x74 */ + u32 cr30; /* 0x78 */ + u32 cr31; /* 0x7C */ + + u32 cr32; /* 0x80 */ + u32 cr33; /* 0x84 */ + u32 cr34; /* 0x88 */ + u32 cr35; /* 0x8C */ + u32 cr36; /* 0x90 */ + u32 cr37; /* 0x94 */ + u32 cr38; /* 0x98 */ + u32 cr39; /* 0x9C */ + + u32 cr40; /* 0xA0 */ + u32 cr41; /* 0xA4 */ + u32 cr42; /* 0xA8 */ + u32 cr43; /* 0xAC */ + u32 cr44; /* 0xB0 */ + u32 cr45; /* 0xB4 */ + u32 cr46; /* 0xB8 */ + u32 cr47; /* 0xBC */ + u32 cr48; /* 0xC0 */ + u32 cr49; /* 0xC4 */ + u32 cr50; /* 0xC8 */ + u32 cr51; /* 0xCC */ + u32 cr52; /* 0xD0 */ + u32 cr53; /* 0xD4 */ + u32 cr54; /* 0xD8 */ + u32 cr55; /* 0xDC */ + u32 cr56; /* 0xE0 */ + u32 cr57; /* 0xE4 */ + u32 cr58; /* 0xE8 */ + u32 cr59; /* 0xEC */ + u32 cr60; /* 0xF0 */ + u32 cr61; /* 0xF4 */ + u32 cr62; /* 0xF8 */ + u32 cr63; /* 0xFC */ + + u32 rsvd3[32]; /* 0xF4-0x1A8 */ + + u32 rcrcr; /* 0x180 */ + u32 swrcr; /* 0x184 */ + u32 rcr; /* 0x188 */ + u32 msovr; /* 0x18C */ + u32 rcrdbg; /* 0x190 */ + u32 sl0adj; /* 0x194 */ + u32 sl1adj; /* 0x198 */ + u32 sl2adj; /* 0x19C */ + u32 sl3adj; /* 0x1A0 */ + u32 sl4adj; /* 0x1A4 */ + u32 flight_tm; /* 0x1A8 */ + u32 padcr; /* 0x1AC */ +} sdramc_t; + +/* Phase Locked Loop (PLL) */ +typedef struct pll { + u32 pcr; /* Control */ + u32 pdr; /* Divider */ + u32 psr; /* Status */ +} pll_t; + +typedef struct scm { + u8 rsvd1[19]; /* 0x00 - 0x12 */ + u8 wcr; /* 0x13 */ + u16 rsvd2; /* 0x14 - 0x15 */ + u16 cwcr; /* 0x16 */ + u8 rsvd3[3]; /* 0x18 - 0x1A */ + u8 cwsr; /* 0x1B */ + u8 rsvd4[3]; /* 0x1C - 0x1E */ + u8 scmisr; /* 0x1F */ + u32 rsvd5; /* 0x20 - 0x23 */ + u32 bcr; /* 0x24 */ + u8 rsvd6[72]; /* 0x28 - 0x6F */ + u32 cfadr; /* 0x70 */ + u8 rsvd7; /* 0x74 */ + u8 cfier; /* 0x75 */ + u8 cfloc; /* 0x76 */ + u8 cfatr; /* 0x77 */ + u32 rsvd8; /* 0x78 - 0x7B */ + u32 cfdtr; /* 0x7C */ +} scm_t; + +typedef struct pm { + u8 pmsr0; /* */ + u8 pmcr0; + u8 pmsr1; + u8 pmcr1; + u32 pmhr0; + u32 pmlr0; + u32 pmhr1; + u32 pmlr1; +} pm_t; + +#endif /* __IMMAP_5441X__ */ diff --git a/arch/m68k/include/asm/m5441x.h b/arch/m68k/include/asm/m5441x.h new file mode 100644 index 0000000000..f5c82d4b56 --- /dev/null +++ b/arch/m68k/include/asm/m5441x.h @@ -0,0 +1,887 @@ +/* + * MCF5441X Internal Memory Map + * + * Copyright 2010-2012 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MCF5441X__ +#define __MCF5441X__ + +/* Interrupt Controller (INTC) */ +#define INT0_LO_RSVD0 (0) +#define INT0_LO_EPORT1 (1) +#define INT0_LO_EPORT2 (2) +#define INT0_LO_EPORT3 (3) +#define INT0_LO_EPORT4 (4) +#define INT0_LO_EPORT5 (5) +#define INT0_LO_EPORT6 (6) +#define INT0_LO_EPORT7 (7) +#define INT0_LO_EDMA_00 (8) +#define INT0_LO_EDMA_01 (9) +#define INT0_LO_EDMA_02 (10) +#define INT0_LO_EDMA_03 (11) +#define INT0_LO_EDMA_04 (12) +#define INT0_LO_EDMA_05 (13) +#define INT0_LO_EDMA_06 (14) +#define INT0_LO_EDMA_07 (15) +#define INT0_LO_EDMA_08 (16) +#define INT0_LO_EDMA_09 (17) +#define INT0_LO_EDMA_10 (18) +#define INT0_LO_EDMA_11 (19) +#define INT0_LO_EDMA_12 (20) +#define INT0_LO_EDMA_13 (21) +#define INT0_LO_EDMA_14 (22) +#define INT0_LO_EDMA_15 (23) +#define INT0_LO_EDMA_ERR (24) +#define INT0_LO_SCM (25) +#define INT0_LO_UART0 (26) +#define INT0_LO_UART1 (27) +#define INT0_LO_UART2 (28) +#define INT0_LO_UART3 (29) +#define INT0_LO_I2C0 (30) +#define INT0_LO_DSPI0 (31) +#define INT0_HI_DTMR0 (32) +#define INT0_HI_DTMR1 (33) +#define INT0_HI_DTMR2 (34) +#define INT0_HI_DTMR3 (35) +#define INT0_HI_MACNET0_TXF (36) +#define INT0_HI_MACNET0_TXB (37) +#define INT0_HI_MACNET0_UN (38) +#define INT0_HI_MACNET0_RL (39) +#define INT0_HI_MACNET0_RXF (40) +#define INT0_HI_MACNET0_RXB (41) +#define INT0_HI_MACNET0_MII (42) +#define INT0_HI_MACNET0_LC (43) +/* not used 44 */ +#define INT0_HI_MACNET0_GRA (45) +#define INT0_HI_MACNET0_EBERR (46) +#define INT0_HI_MACNET0_BABT (47) +#define INT0_HI_MACNET0_BABR (48) +#define INT0_HI_MACNET1_TXF (49) +#define INT0_HI_MACNET1_TXB (50) +#define INT0_HI_MACNET1_UN (51) +#define INT0_HI_MACNET1_RL (52) +#define INT0_HI_MACNET1_RXF (53) +#define INT0_HI_MACNET1_RXB (54) +#define INT0_HI_MACNET1_MII (55) +#define INT0_HI_MACNET1_LC (56) +/* not used 57 */ +#define INT0_HI_MACNET1_GRA (58) +#define INT0_HI_MACNET1_EBERR (59) +#define INT0_HI_MACNET1_BABT (60) +#define INT0_HI_MACNET1_BABR (61) +#define INT0_HI_SCMIR (62) +#define INT0_HI_OW (63) + +#define INT1_LO_CAN0_IFG (0) +#define INT1_LO_CAN0_BOFF (1) +/* not used 2 */ +#define INT1_LO_CAN0_TXRXWRN (3) +#define INT1_LO_CAN1_IFG (4) +#define INT1_LO_CAN1_BOFF (5) +/* not used 6 */ +#define INT1_LO_CAN1_TXRXWRN (7) +#define INT1_LO_EDMA_16 (8) +#define INT1_LO_EDMA_17 (9) +#define INT1_LO_EDMA_18 (10) +#define INT1_LO_EDMA_19 (11) +#define INT1_LO_EDMA_20 (12) +#define INT1_LO_EDMA_21 (13) +#define INT1_LO_EDMA_22 (14) +#define INT1_LO_EDMA_23 (15) +#define INT1_LO_EDMA_24 (16) +#define INT1_LO_EDMA_25 (17) +#define INT1_LO_EDMA_26 (18) +#define INT1_LO_EDMA_27 (19) +#define INT1_LO_EDMA_28 (20) +#define INT1_LO_EDMA_29 (21) +#define INT1_LO_EDMA_30 (22) +#define INT1_LO_EDMA_31 (23) +#define INT1_LO_EDMA_32 (24) +#define INT1_LO_EDMA_33 (25) +#define INT1_LO_EDMA_34 (26) +#define INT1_LO_EDMA_35 (27) +#define INT1_LO_EDMA_36 (28) +#define INT1_LO_EDMA_37 (29) +#define INT1_LO_EDMA_38 (30) +#define INT1_LO_EDMA_39 (31) +#define INT1_LO_EDMA_40 (32) +#define INT1_HI_EDMA_41 (33) +#define INT1_HI_EDMA_42 (34) +#define INT1_HI_EDMA_43 (35) +#define INT1_HI_EDMA_44 (36) +#define INT1_HI_EDMA_45 (37) +#define INT1_HI_EDMA_46 (38) +#define INT1_HI_EDMA_47 (39) +#define INT1_HI_EDMA_48 (40) +#define INT1_HI_EDMA_49 (41) +#define INT1_HI_EDMA_50 (42) +#define INT1_HI_EDMA_51 (43) +#define INT1_HI_EDMA_52 (44) +#define INT1_HI_EDMA_53 (45) +#define INT1_HI_EDMA_54 (46) +#define INT1_HI_EDMA_55 (47) +#define INT1_HI_UART4 (48) +#define INT1_HI_UART5 (49) +#define INT1_HI_UART6 (50) +#define INT1_HI_UART7 (51) +#define INT1_HI_UART8 (52) +#define INT1_HI_UART9 (53) +#define INT1_HI_DSPI1 (54) +#define INT1_HI_DSPI2 (55) +#define INT1_HI_DSPI3 (56) +#define INT1_HI_I2C1 (57) +#define INT1_HI_I2C2 (58) +#define INT1_HI_I2C3 (59) +#define INT1_HI_I2C4 (60) +#define INT1_HI_I2C5 (61) + +#define INT2_LO_EDMA56_63 (0) +#define INT2_LO_PWM_SM0SR_CF (1) +#define INT2_LO_PWM_SM1SR_CF (2) +#define INT2_LO_PWM_SM2SR_CF (3) +#define INT2_LO_PWM_SM3SR_CF (4) +#define INT2_LO_PWM_SM0SR_RF (5) +#define INT2_LO_PWM_SM1SR_RF (6) +#define INT2_LO_PWM_SM2SR_RF (7) +#define INT2_LO_PWM_SM3SR_RF (8) +#define INT2_LO_PWM_FSR (9) +#define INT2_LO_PWM_SMSR_REF (10) +#define INT2_LO_PLL_SR_LOCF (11) +#define INT2_LO_PLL_SR_LOLF (12) +#define INT2_LO_PIT0_PIF (13) +#define INT2_LO_PIT1_PIF (14) +#define INT2_LO_PIT2_PIF (15) +#define INT2_LO_PIT3_PIF (16) +#define INT2_LO_USBOTG_USBSTS (17) +#define INT2_LO_USBH_USBSTS (18) +/* not used 19-20 */ +#define INT2_LO_SSI0 (21) +#define INT2_LO_SSI1 (22) +#define INT2_LO_NFC (23) +/* not used 24-25 */ +#define INT2_LO_RTC (26) +#define INT2_LO_CCM_UOCSR (27) +#define INT2_LO_RNG_EI (28) +#define INT2_LO_SIM1_DATA (29) +#define INT2_LO_SIM1 (30) +#define INT2_LO_SDHC (31) +/* not used 32-37 */ +#define INT2_HI_L2SW_BERR (38) +#define INT2_HI_L2SW_RXB (39) +#define INT2_HI_L2SW_RXF (40) +#define INT2_HI_L2SW_TXB (41) +#define INT2_HI_L2SW_TXF (42) +#define INT2_HI_L2SW_QM (43) +#define INT2_HI_L2SW_OD0 (44) +#define INT2_HI_L2SW_OD1 (45) +#define INT2_HI_L2SW_OD2 (46) +#define INT2_HI_L2SW_LRN (47) +#define INT2_HI_MACNET0_TS (48) +#define INT2_HI_MACNET0_WAKE (49) +#define INT2_HI_MACNET0_PLR (50) +/* not used 51-54 */ +#define INT2_HI_MACNET1_TS (51) +#define INT2_HI_MACNET1_WAKE (52) +#define INT2_HI_MACNET1_PLR (53) + +/* Serial Boot Facility (SBF) */ +#define SBF_SBFCR_BLDIV(x) (((x)&0x000F)) +#define SBF_SBFCR_FR (0x0010) + +/* Reset Controller Module (RCM) */ +#define RCM_RCR_SOFTRST (0x80) +#define RCM_RCR_FRCRSTOUT (0x40) + +#define RCM_RSR_SOFT (0x20) +#define RCM_RSR_LOC (0x10) +#define RCM_RSR_POR (0x08) +#define RCM_RSR_EXT (0x04) +#define RCM_RSR_WDR_CORE (0x02) +#define RCM_RSR_LOL (0x01) + +/* Chip Configuration Module (CCM) */ +#define CCM_CCR_BOOTMOD (0xC000) +#define CCM_CCR_PLLMULT (0x0FC0) +#define CCM_CCR_BOOTPS (0x0030) +#define CCM_CCR_BOOTPS_32 (0x0000) +#define CCM_CCR_BOOTPS_16 (0x0020) +#define CCM_CCR_BOOTPS_8 (0x0010) +#define CCM_CCR_BOOTPS_ (0x0000) +#define CCM_CCR_ALESEL (0x0008) +#define CCM_CCR_OSCMOD (0x0004) +#define CCM_CCR_PLLMOD (0x0002) +#define CCM_CCR_BOOTMEM (0x0001) + +#define CCM_CIR_PIN_MASK (0xFFC0) +#define CCM_CIR_PRN_MASK (0x003F) +#define CCM_CIR_PIN_MCF54410 (0x9F<<6) +#define CCM_CIR_PIN_MCF54415 (0xA0<<6) +#define CCM_CIR_PIN_MCF54416 (0xA1<<6) +#define CCM_CIR_PIN_MCF54417 (0xA2<<6) +#define CCM_CIR_PIN_MCF54418 (0xA3<<6) + +#define CCM_MISCCR_PWM_EXTCLK(x) (((x)&(0x0003)<<14) +#define CCM_MISCCR_PWM_EXTCLK_MASK (0x3FFF) +#define CCM_MISCCR_PWM_EXTCLK_TMR0 (0x0000) +#define CCM_MISCCR_PWM_EXTCLK_TMR1 (0x4000) +#define CCM_MISCCR_PWM_EXTCLK_TMR2 (0x8000) +#define CCM_MISCCR_PWM_EXTCLK_TMR3 (0xC000) +#define CCM_MISCCR_LIMP (0x1000) +#define CCM_MISCCR_BME (0x0800) +#define CCM_MISCCR_BMT(x) (((x)&0x0007)<<8) +#define CCM_MISCCR_BMT_65536 (0) +#define CCM_MISCCR_BMT_32768 (1) +#define CCM_MISCCR_BMT_16384 (2) +#define CCM_MISCCR_BMT_8192 (3) +#define CCM_MISCCR_BMT_4096 (4) +#define CCM_MISCCR_BMT_2048 (5) +#define CCM_MISCCR_BMT_1024 (6) +#define CCM_MISCCR_BMT_512 (7) +#define CCM_MISCCR_SDHCSRC (0x0040) +#define CCM_MISCCR_SSI1SRC (0x0020) +#define CCM_MISCCR_SSI0SRC (0x0010) +#define CCM_MISCCR_USBHOC (0x0008) +#define CCM_MISCCR_USBOOC (0x0004) +#define CCM_MISCCR_USBPUE (0x0002) +#define CCM_MISCCR_USBSRC (0x0001) + +#define CCM_CDRH_SSI0DIV(x) (((x)&0x00FF)<<8) +#define CCM_CDRH_SSI0DIV_MASK (0x00FF) +#define CCM_CDRH_SSI1DIV(x) (((x)&0x00FF)) +#define CCM_CDRH_SSI1DIV_MASK (0xFF00) +#define CCM_CDRL_LPDIV(x) (((x)&0x000F)<<8) +#define CCM_CDRL_LPDIV_MASK (0xFF0F) +#define CCM_CDR_LPDIV(x) CCM_CDRL_LPDIV(x) + +#define CCM_UOCSR_DPPD (0x2000) +#define CCM_UOCSR_DMPD (0x1000) +#define CCM_UOCSR_DRV_VBUS (0x0800) +#define CCM_UOCSR_CRG_VBUS (0x0400) +#define CCM_UOCSR_DCR_VBUS (0x0200) +#define CCM_UOCSR_DPPU (0x0100) +#define CCM_UOCSR_AVLD (0x0080) +#define CCM_UOCSR_BVLD (0x0040) +#define CCM_UOCSR_VVLD (0x0020) +#define CCM_UOCSR_SEND (0x0010) +#define CCM_UOCSR_PWRFLT (0x0008) +#define CCM_UOCSR_WKUP (0x0004) +#define CCM_UOCSR_UOMIE (0x0002) +#define CCM_UOCSR_XPDE (0x0001) + +#define CCM_UHCSR_DRV_VBUS (0x0010) +#define CCM_UHCSR_PWRFLT (0x0008) +#define CCM_UHCSR_WKUP (0x0004) +#define CCM_UHCSR_UOMIE (0x0002) +#define CCM_UHCSR_XPDE (0x0001) + +#define CCM_MISCCR3_TMR_ENET (0x1000) +#define CCM_MISCCR3_ENETCLK(x) (((x)&7)<<8) +#define CCM_MISCCR3_ENETCLK_MASK (0xF8FF) +#define CCM_MISCCR3_ENETCLK_MII (0x0700) +#define CCM_MISCCR3_ENETCLK_OSC (0x0600) +#define CCM_MISCCR3_ENETCLK_USB (0x0500) +#define CCM_MISCCR3_ENETCLK_TMR3 (0x0400) +#define CCM_MISCCR3_ENETCLK_TMR2 (0x0300) +#define CCM_MISCCR3_ENETCLK_TMR1 (0x0200) +#define CCM_MISCCR3_ENETCLK_TMR0 (0x0100) +#define CCM_MISCCR3_ENETCLK_INTBUS (0x0000) + +#define CCM_MISCCR2_EXTCLKBYP (0x8000) +#define CCM_MISCCR2_DDR2CLK (0x4000) +#define CCM_MISCCR2_RGPIO_HALF (0x2000) +#define CCM_MISCCR2_SWTSCR (0x1000) +#define CCM_MISCCR2_PLLMODE(x) (((x)&7)<<8) +#define CCM_MISCCR2_PLLMODE_MASK (0xF8FF) +#define CCM_MISCCR2_DCCBYP (0x0080) +#define CCM_MISCCR2_DAC1SEL (0x0040) +#define CCM_MISCCR2_DAC0SEL (0x0020) +#define CCM_MISCCR2_ADCEN (0x0010) +#define CCM_MISCCR2_ADC7SEL (0x0008) +#define CCM_MISCCR2_ADC3SEL (0x0004) +#define CCM_MISCCR2_FBHALF (0x0002) +#define CCM_MISCCR2_ULPI (0x0001) + +#define CCM_FNACR_PCR(x) (((x)&0x0F)<<24) +#define CCM_FNACR_PCR_MASK (0xF0FFFFFF) +#define CCM_FNACR_MCC(x) ((x)&0xFFFF) +#define CCM_FNACR_MCC_MASK (0xFFFF0000) + +/* General Purpose I/O Module (GPIO) */ +#define GPIO_PAR_FBCTL_ALE(x) (((x)&3)<<6) +#define GPIO_PAR_FBCTL_ALE_MASK (0x3F) +#define GPIO_PAR_FBCTL_ALE_FB_ALE (0xC0) +#define GPIO_PAR_FBCTL_ALE_FB_TS (0x80) +#define GPIO_PAR_FBCTL_ALE_GPIO (0x00) +#define GPIO_PAR_FBCTL_OE(x) (((x)&3)<<4) +#define GPIO_PAR_FBCTL_OE_MASK (0xCF) +#define GPIO_PAR_FBCTL_OE_FB_OE (0x30) +#define GPIO_PAR_FBCTL_OE_FB_TBST (0x20) +#define GPIO_PAR_FBCTL_OE_NFC_RE (0x20) +#define GPIO_PAR_FBCTL_OE_GPIO (0x00) +#define GPIO_PAR_FBCTL_FBCLK (0x08) +#define GPIO_PAR_FBCTL_RW (0x04) +#define GPIO_PAR_FBCTL_TA(x) ((x)&3) +#define GPIO_PAR_FBCTL_TA_MASK (0xFC) +#define GPIO_PAR_FBCTL_TA_TA (0x03) +#define GPIO_PAR_FBCTL_TA_NFC_RB (0x01) +#define GPIO_PAR_FBCTL_TA_GPIO (0x00) + +#define GPIO_PAR_BE_BS3(x) (((x)&0x03)<<6) +#define GPIO_PAR_BE_BE3_MASK (0x3F) +#define GPIO_PAR_BE_BE3_BE3 (0xC0) +#define GPIO_PAR_BE_BE3_CS3 (0x80) +#define GPIO_PAR_BE_BE3_FB_A1 (0x40) +#define GPIO_PAR_BE_BE3_NFC_ALE (0x40) +#define GPIO_PAR_BE_BE3_GPIO (0x00) +#define GPIO_PAR_BE_BS2(x) (((x)&0x03)<<4) +#define GPIO_PAR_BE_BE2_MASK (0xCF) +#define GPIO_PAR_BE_BE2_BE2 (0x30) +#define GPIO_PAR_BE_BE2_CS2 (0x20) +#define GPIO_PAR_BE_BE2_FB_A0 (0x10) +#define GPIO_PAR_BE_BE2_NFC_CLE (0x10) +#define GPIO_PAR_BE_BE2_GPIO (0x00) +#define GPIO_PAR_BE_BS1(x) (((x)&0x03)<<2) +#define GPIO_PAR_BE_BE1_MASK (0xF3) +#define GPIO_PAR_BE_BE1_BE1 (0x0C) +#define GPIO_PAR_BE_BE1_FB_TSZ1 (0x08) +#define GPIO_PAR_BE_BE1_GPIO (0x00) +#define GPIO_PAR_BE_BS0(x) ((x)&0x03) +#define GPIO_PAR_BE_BE0_MASK (0xFC) +#define GPIO_PAR_BE_BE0_BE0 (0x03) +#define GPIO_PAR_BE_BE0_FB_TSZ0 (0x02) +#define GPIO_PAR_BE_BE0_GPIO (0x00) + +#define GPIO_PAR_CS_CS5(x) (((x)&0x03)<<6) +#define GPIO_PAR_CS_CS5_MASK (0x3F) +#define GPIO_PAR_CS_CS5_CS5 (0xC0) +#define GPIO_PAR_CS_CS5_DACK1 (0x80) +#define GPIO_PAR_CS_CS5_GPIO (0x00) +#define GPIO_PAR_CS_CS4(x) (((x)&0x03)<<4) +#define GPIO_PAR_CS_CS4_MASK (0xCF) +#define GPIO_PAR_CS_CS4_CS4 (0x30) +#define GPIO_PAR_CS_CS4_DREQ1 (0x20) +#define GPIO_PAR_CS_CS4_GPIO (0x00) +#define GPIO_PAR_CS_CS1(x) (((x)&0x03)<<2) +#define GPIO_PAR_CS_CS1_MASK (0xF3) +#define GPIO_PAR_CS_CS1_CS1 (0x0C) +#define GPIO_PAR_CS_CS1_NFC_CE (0x04) +#define GPIO_PAR_CS_CS1_GPIO (0x00) +#define GPIO_PAR_CS_CS0_CS0 (0x01) + +#define GPIO_PAR_CANI2C_I2C0SCL(x) (((x)&0x03)<<6) +#define GPIO_PAR_CANI2C_I2C0SCL_MASK (0x3F) +#define GPIO_PAR_CANI2C_I2C0SCL_I2C0SCL (0xC0) +#define GPIO_PAR_CANI2C_I2C0SCL_U8TXD (0x80) +#define GPIO_PAR_CANI2C_I2C0SCL_CAN0TX (0x40) +#define GPIO_PAR_CANI2C_I2C0SCL_GPIO (0x00) +#define GPIO_PAR_CANI2C_I2C0SDA(x) (((x)&0x03)<<4) +#define GPIO_PAR_CANI2C_I2C0SDA_MASK (0xCF) +#define GPIO_PAR_CANI2C_I2C0SDA_I2C0SDA (0x30) +#define GPIO_PAR_CANI2C_I2C0SDA_U8RXD (0x20) +#define GPIO_PAR_CANI2C_I2C0SDA_CAN0RX (0x10) +#define GPIO_PAR_CANI2C_I2C0SDA_GPIO (0x00) +#define GPIO_PAR_CANI2C_CAN1TX(x) (((x)&0x03)<<2) +#define GPIO_PAR_CANI2C_CAN1TX_MASK (0xF3) +#define GPIO_PAR_CANI2C_CAN1TX_CAN1TX (0x0C) +#define GPIO_PAR_CANI2C_CAN1TX_U9TXD (0x08) +#define GPIO_PAR_CANI2C_CAN1TX_I2C1SCL (0x04) +#define GPIO_PAR_CANI2C_CAN1TX_GPIO (0x00) +#define GPIO_PAR_CANI2C_CAN1RX(x) ((x)&0x03) +#define GPIO_PAR_CANI2C_CAN1RX_MASK (0xFC) +#define GPIO_PAR_CANI2C_CAN1RX_CAN1RX (0x03) +#define GPIO_PAR_CANI2C_CAN1RX_U9RXD (0x02) +#define GPIO_PAR_CANI2C_CAN1RX_I2C1SDA (0x01) +#define GPIO_PAR_CANI2C_CAN1RX_GPIO (0x00) + +#define GPIO_PAR_IRQH_IRQ7 (0x10) +#define GPIO_PAR_IRQH_IRQ4(x) (((x)&0x03)<<2) +#define GPIO_PAR_IRQH_IRQ4_MASK (0xF3) +#define GPIO_PAR_IRQH_IRQ4_IRQ4 (0x0C) +#define GPIO_PAR_IRQH_IRQ4_DREQ0 (0x08) +#define GPIO_PAR_IRQH_IRQ4_GPIO (0x00) +#define GPIO_PAR_IRQH_IRQ1 (0x03) + +#define GPIO_PAR_IRQL_IRQ6(x) (((x)&0x03)<<6) +#define GPIO_PAR_IRQL_IRQ6_MASK (0x3F) +#define GPIO_PAR_IRQL_IRQ6_IRQ6 (0xC0) +#define GPIO_PAR_IRQL_IRQ6_USBCLKIN (0x40) +#define GPIO_PAR_IRQL_IRQ6_GPIO (0x00) +#define GPIO_PAR_IRQL_IRQ3(x) (((x)&0x03)<<4) +#define GPIO_PAR_IRQL_IRQ3_MASK (0xCF) +#define GPIO_PAR_IRQL_IRQ3_IRQ3 (0x30) +#define GPIO_PAR_IRQL_IRQ3_DSPI0_PCS3 (0x20) +#define GPIO_PAR_IRQL_IRQ3_USB1_VBUS_EN (0x10) +#define GPIO_PAR_IRQL_IRQ3_GPIO (0x00) +#define GPIO_PAR_IRQL_IRQ2(x) (((x)&0x03)<<2) +#define GPIO_PAR_IRQL_IRQ2_MASK (0xF3) +#define GPIO_PAR_IRQL_IRQ2_IRQ2 (0x0C) +#define GPIO_PAR_IRQL_IRQ2_DSPI0_PCS2 (0x08) +#define GPIO_PAR_IRQL_IRQ2_USB1_VBUS_OC (0x04) +#define GPIO_PAR_IRQL_IRQ2_GPIO (0x00) + +#define GPIO_PAR_DSPI0_SIN(x) (((x)&0x03)<<6) +#define GPIO_PAR_DSPI0_SIN_MASK (0x3F) +#define GPIO_PAR_DSPI0_SIN_DSPI0SIN (0xC0) +#define GPIO_PAR_DSPI0_SIN_SBF_DI (0xC0) +#define GPIO_PAR_DSPI0_SIN_U3RXD (0x80) +#define GPIO_PAR_DSPI0_SIN_SDHC_CMD (0x40) +#define GPIO_PAR_DSPI0_SIN_GPIO (0x00) +#define GPIO_PAR_DSPI0_SOUT(x) (((x)&0x03)<<4) +#define GPIO_PAR_DSPI0_SOUT_MASK (0xCF) +#define GPIO_PAR_DSPI0_SOUT_DSPI0SOUT (0x30) +#define GPIO_PAR_DSPI0_SOUT_SBF_DO (0x30) +#define GPIO_PAR_DSPI0_SOUT_U3TXD (0x20) +#define GPIO_PAR_DSPI0_SOUT_SDHC_DAT0 (0x10) +#define GPIO_PAR_DSPI0_SOUT_GPIO (0x00) +#define GPIO_PAR_DSPI0_SCK(x) (((x)&0x03)<<2) +#define GPIO_PAR_DSPI0_SCK_MASK (0xF3) +#define GPIO_PAR_DSPI0_SCK_DSPI0SCK (0x0C) +#define GPIO_PAR_DSPI0_SCK_SBF_CK (0x0C) +#define GPIO_PAR_DSPI0_SCK_I2C3SCL (0x08) +#define GPIO_PAR_DSPI0_SCK_SDHC_CLK (0x04) +#define GPIO_PAR_DSPI0_SCK_GPIO (0x00) +#define GPIO_PAR_DSPI0_PCS0(x) ((x)&0x03) +#define GPIO_PAR_DSPI0_PCS0_MASK (0xFC) +#define GPIO_PAR_DSPI0_PCS0_DSPI0PCS0 (0x03) +#define GPIO_PAR_DSPI0_PCS0_SS (0x03) +#define GPIO_PAR_DSPI0_PCS0_I2C3SDA (0x02) +#define GPIO_PAR_DSPI0_PCS0_SDHC_DAT3 (0x01) +#define GPIO_PAR_DSPI0_PCS0_GPIO (0x00) + +#define GPIO_PAR_DSPIOW_DSPI0PSC1 (0x80) +#define GPIO_PAR_DSPIOW_SBF_CS (0x80) +#define GPIO_PAR_DSPIOW_OWDAT (((x)&0x03)<<4) +#define GPIO_PAR_DSPIOW_OWDAT_MASK (0xCF) +#define GPIO_PAR_DSPIOW_OWDAT_OWDAT (0x30) +#define GPIO_PAR_DSPIOW_OWDAT_DACK0 (0x20) +#define GPIO_PAR_DSPIOW_OWDAT_GPIO (0x00) + +#define GPIO_PAR_TIMER_T3IN(x) (((x)&0x03)<<6) +#define GPIO_PAR_TIMER_T3IN_MASK (0x3F) +#define GPIO_PAR_TIMER_T3IN_T3IN (0xC0) +#define GPIO_PAR_TIMER_T3IN_EXTA3 (0xC0) +#define GPIO_PAR_TIMER_T3IN_T3OUT (0x80) +#define GPIO_PAR_TIMER_T3IN_USB0_VBUSEN (0x40) +#define GPIO_PAR_TIMER_T3IN_ULIPI_DIR (0x40) +#define GPIO_PAR_TIMER_T3IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T2IN(x) (((x)&0x03)<<4) +#define GPIO_PAR_TIMER_T2IN_MASK (0xCF) +#define GPIO_PAR_TIMER_T2IN_T2IN (0x30) +#define GPIO_PAR_TIMER_T2IN_EXTA2 (0x30) +#define GPIO_PAR_TIMER_T2IN_T2OUT (0x20) +#define GPIO_PAR_TIMER_T2IN_SDHC_DAT2 (0x10) +#define GPIO_PAR_TIMER_T2IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T1IN(x) (((x)&0x03)<<2) +#define GPIO_PAR_TIMER_T1IN_MASK (0xF3) +#define GPIO_PAR_TIMER_T1IN_T1IN (0x0C) +#define GPIO_PAR_TIMER_T1IN_EXTA1 (0x0C) +#define GPIO_PAR_TIMER_T1IN_T1OUT (0x08) +#define GPIO_PAR_TIMER_T1IN_SDHC_DAT1 (0x04) +#define GPIO_PAR_TIMER_T1IN_GPIO (0x00) +#define GPIO_PAR_TIMER_T0IN(x) ((x)&0x03) +#define GPIO_PAR_TIMER_T0IN_MASK (0xFC) +#define GPIO_PAR_TIMER_T0IN_T0IN (0x03) +#define GPIO_PAR_TIMER_T0IN_EXTA0 (0x03) +#define GPIO_PAR_TIMER_T0IN_T0OUT (0x02) +#define GPIO_PAR_TIMER_T0IN_USBO_VBUSOC (0x01) +#define GPIO_PAR_TIMER_T0IN_ULPI_NXT (0x01) +#define GPIO_PAR_TIMER_T0IN_GPIO (0x00) + +#define GPIO_PAR_UART2_U2CTS(x) (((x)&0x03)<<6) +#define GPIO_PAR_UART2_U2CTS_MASK (0x3F) +#define GPIO_PAR_UART2_U2CTS_U2CTS (0xC0) +#define GPIO_PAR_UART2_U2CTS_U6TXD (0x80) +#define GPIO_PAR_UART2_U2CTS_SSI1_BCLK (0x40) +#define GPIO_PAR_UART2_U2CTS_GPIO (0x00) +#define GPIO_PAR_UART2_U2RTS(x) (((x)&0x03)<<4) +#define GPIO_PAR_UART2_U2RTS_MASK (0xCF) +#define GPIO_PAR_UART2_U2RTS_U2RTS (0x30) +#define GPIO_PAR_UART2_U2RTS_U6RXD (0x20) +#define GPIO_PAR_UART2_U2RTS_SSI1_FS (0x10) +#define GPIO_PAR_UART2_U2RTS_GPIO (0x00) +#define GPIO_PAR_UART2_U2RXD(x) (((x)&0x03)<<2) +#define GPIO_PAR_UART2_U2RXD_MASK (0xF3) +#define GPIO_PAR_UART2_U2RXD_U2RXD (0x0C) +#define GPIO_PAR_UART2_U2RXD_PWM_A3 (0x08) +#define GPIO_PAR_UART2_U2RXD_SSI1_RXD (0x04) +#define GPIO_PAR_UART2_U2RXD_GPIO (0x00) +#define GPIO_PAR_UART2_U2TXD(x) ((x)&0x03) +#define GPIO_PAR_UART2_U2TXD_MASK (0xFC) +#define GPIO_PAR_UART2_U2TXD_U2TXD (0x03) +#define GPIO_PAR_UART2_U2TXD_PWM_B3 (0x02) +#define GPIO_PAR_UART2_U2TXD_SSI1_TXD (0x01) +#define GPIO_PAR_UART2_U2TXD_GPIO (0x00) + +#define GPIO_PAR_UART1_U1CTS(x) (((x)&0x03)<<6) +#define GPIO_PAR_UART1_U1CTS_MASK (0x3F) +#define GPIO_PAR_UART1_U1CTS_U1CTS (0xC0) +#define GPIO_PAR_UART1_U1CTS_U5TXD (0x80) +#define GPIO_PAR_UART1_U1CTS_DSPI3_SCK (0x40) +#define GPIO_PAR_UART1_U1CTS_GPIO (0x00) +#define GPIO_PAR_UART1_U1RTS(x) (((x)&0x03)<<4) +#define GPIO_PAR_UART1_U1RTS_MASK (0xCF) +#define GPIO_PAR_UART1_U1RTS_U1RTS (0x30) +#define GPIO_PAR_UART1_U1RTS_U5RXD (0x20) +#define GPIO_PAR_UART1_U1RTS_DSPI3_PCS0 (0x10) +#define GPIO_PAR_UART1_U1RTS_GPIO (0x00) +#define GPIO_PAR_UART1_U1RXD(x) (((x)&0x03)<<2) +#define GPIO_PAR_UART1_U1RXD_MASK (0xF3) +#define GPIO_PAR_UART1_U1RXD_U1RXD (0x0C) +#define GPIO_PAR_UART1_U1RXD_I2C5SDA (0x08) +#define GPIO_PAR_UART1_U1RXD_DSPI3_SIN (0x04) +#define GPIO_PAR_UART1_U1RXD_GPIO (0x00) +#define GPIO_PAR_UART1_U1TXD(x) ((x)&0x03) +#define GPIO_PAR_UART1_U1TXD_MASK (0xFC) +#define GPIO_PAR_UART1_U1TXD_U1TXD (0x03) +#define GPIO_PAR_UART1_U1TXD_I2C5SCL (0x02) +#define GPIO_PAR_UART1_U1TXD_DSPI3_SOUT (0x01) +#define GPIO_PAR_UART1_U1TXD_GPIO (0x00) + +#define GPIO_PAR_UART0_U0CTS(x) (((x)&0x03)<<6) +#define GPIO_PAR_UART0_U0CTS_MASK (0x3F) +#define GPIO_PAR_UART0_U0CTS_U0CTS (0xC0) +#define GPIO_PAR_UART0_U0CTS_U4TXD (0x80) +#define GPIO_PAR_UART0_U0CTS_DSPI2_SCK (0x40) +#define GPIO_PAR_UART0_U0CTS_GPIO (0x00) +#define GPIO_PAR_UART0_U0RTS(x) (((x)&0x03)<<4) +#define GPIO_PAR_UART0_U0RTS_MASK (0xCF) +#define GPIO_PAR_UART0_U0RTS_U0RTS (0x30) +#define GPIO_PAR_UART0_U0RTS_U4RXD (0x20) +#define GPIO_PAR_UART0_U0RTS_DSPI2_PCS0 (0x10) +#define GPIO_PAR_UART0_U0RTS_GPIO (0x00) +#define GPIO_PAR_UART0_U0RXD(x) (((x)&0x03)<<2) +#define GPIO_PAR_UART0_U0RXD_MASK (0xF3) +#define GPIO_PAR_UART0_U0RXD_U0RXD (0x0C) +#define GPIO_PAR_UART0_U0RXD_I2C4SDA (0x08) +#define GPIO_PAR_UART0_U0RXD_DSPI2_SIN (0x04) +#define GPIO_PAR_UART0_U0RXD_GPIO (0x00) +#define GPIO_PAR_UART0_U0TXD(x) ((x)&0x03) +#define GPIO_PAR_UART0_U0TXD_MASK (0xFC) +#define GPIO_PAR_UART0_U0TXD_U0TXD (0x03) +#define GPIO_PAR_UART0_U0TXD_I2C4SCL (0x02) +#define GPIO_PAR_UART0_U0TXD_DSPI2_SOUT (0x01) +#define GPIO_PAR_UART0_U0TXD_GPIO (0x00) + +#define GPIO_PAR_SDHCH_DAT3(x) (((x)&0x03)<<6) +#define GPIO_PAR_SDHCH_DAT3_MASK (0x3F) +#define GPIO_PAR_SDHCH_DAT3_DAT3 (0xC0) +#define GPIO_PAR_SDHCH_DAT3_PWM_A1 (0x80) +#define GPIO_PAR_SDHCH_DAT3_DSPI1_PCS0 (0x40) +#define GPIO_PAR_SDHCH_DAT3_GPIO (0x00) +#define GPIO_PAR_SDHCH_DAT2(x) (((x)&0x03)<<4) +#define GPIO_PAR_SDHCH_DAT2_MASK (0xCF) +#define GPIO_PAR_SDHCH_DAT2_DAT2 (0x30) +#define GPIO_PAR_SDHCH_DAT2_PWM_B1 (0x20) +#define GPIO_PAR_SDHCH_DAT2_DSPI1_PCS2 (0x10) +#define GPIO_PAR_SDHCH_DAT2_GPIO (0x00) +#define GPIO_PAR_SDHCH_DAT1(x) (((x)&0x03)<<2) +#define GPIO_PAR_SDHCH_DAT1_MASK (0xF3) +#define GPIO_PAR_SDHCH_DAT1_DAT1 (0x0C) +#define GPIO_PAR_SDHCH_DAT1_PWM_A2 (0x08) +#define GPIO_PAR_SDHCH_DAT1_DSPI1_PCS1 (0x04) +#define GPIO_PAR_SDHCH_DAT1_GPIO (0x00) +#define GPIO_PAR_SDHCH_DAT0(x) ((x)&0x03) +#define GPIO_PAR_SDHCH_DAT0_MASK (0xFC) +#define GPIO_PAR_SDHCH_DAT0_DAT0 (0x03) +#define GPIO_PAR_SDHCH_DAT0_PWM_B2 (0x02) +#define GPIO_PAR_SDHCH_DAT0_DSPI1_SOUT (0x01) +#define GPIO_PAR_SDHCH_DAT0_GPIO (0x00) + +#define GPIO_PAR_SDHCL_CMD(x) (((x)&0x03)<<2) +#define GPIO_PAR_SDHCL_CMD_MASK (0xF3) +#define GPIO_PAR_SDHCL_CMD_CMD (0x0C) +#define GPIO_PAR_SDHCL_CMD_PWM_A0 (0x08) +#define GPIO_PAR_SDHCL_CMD_DSPI1_SIN (0x04) +#define GPIO_PAR_SDHCL_CMD_GPIO (0x00) +#define GPIO_PAR_SDHCL_CLK(x) ((x)&0x03) +#define GPIO_PAR_SDHCL_CLK_MASK (0xFC) +#define GPIO_PAR_SDHCL_CLK_CLK (0x03) +#define GPIO_PAR_SDHCL_CLK_PWM_B0 (0x02) +#define GPIO_PAR_SDHCL_CLK_DSPI1_SCK (0x01) +#define GPIO_PAR_SDHCL_CLK_GPIO (0x00) + +#define GPIO_PAR_SIMP0H_DAT(x) (((x)&0x03)<<6) +#define GPIO_PAR_SIMP0H_DAT_MASK (0x3F) +#define GPIO_PAR_SIMP0H_DAT_DAT (0xC0) +#define GPIO_PAR_SIMP0H_DAT_PWM_FAULT2 (0x80) +#define GPIO_PAR_SIMP0H_DAT_SDHC_DAT7 (0x40) +#define GPIO_PAR_SIMP0H_DAT_GPIO (0x00) +#define GPIO_PAR_SIMP0H_VEN(x) (((x)&0x03)<<4) +#define GPIO_PAR_SIMP0H_VEN_MASK (0xCF) +#define GPIO_PAR_SIMP0H_VEN_VEN (0x30) +#define GPIO_PAR_SIMP0H_VEN_PWM_FAULT0 (0x20) +#define GPIO_PAR_SIMP0H_VEN_GPIO (0x00) +#define GPIO_PAR_SIMP0H_RST(x) (((x)&0x03)<<2) +#define GPIO_PAR_SIMP0H_RST_MASK (0xF3) +#define GPIO_PAR_SIMP0H_RST_RST (0x0C) +#define GPIO_PAR_SIMP0H_RST_PWM_FORCE (0x08) +#define GPIO_PAR_SIMP0H_RST_SDHC_DAT6 (0x04) +#define GPIO_PAR_SIMP0H_RST_GPIO (0x00) +#define GPIO_PAR_SIMP0H_PD(x) ((x)&0x03) +#define GPIO_PAR_SIMP0H_PD_MASK (0xFC) +#define GPIO_PAR_SIMP0H_PD_PD (0x03) +#define GPIO_PAR_SIMP0H_PD_PWM_SYNC (0x02) +#define GPIO_PAR_SIMP0H_PD_SDHC_DAT5 (0x01) +#define GPIO_PAR_SIMP0H_PD_GPIO (0x00) + +#define GPIO_PAR_SIMP0L_CLK(x) ((x)&0x03) +#define GPIO_PAR_SIMP0L_CLK_MASK (0xFC) +#define GPIO_PAR_SIMP0L_CLK_CLK (0x03) +#define GPIO_PAR_SIMP0L_CLK_PWM_FAULT1 (0x02) +#define GPIO_PAR_SIMP0L_CLK_SDHC_DAT4 (0x01) +#define GPIO_PAR_SIMP0L_CLK_GPIO (0x00) + +#define GPIO_PAR_SSI0H_RXD(x) (((x)&0x03)<<6) +#define GPIO_PAR_SSI0H_RXD_MASK (0x3F) +#define GPIO_PAR_SSI0H_RXD_RXD (0xC0) +#define GPIO_PAR_SSI0H_RXD_I2C2SDA (0x80) +#define GPIO_PAR_SSI0H_RXD_SIM1_VEN (0x40) +#define GPIO_PAR_SSI0H_RXD_GPIO (0x00) +#define GPIO_PAR_SSI0H_TXD(x) (((x)&0x03)<<4) +#define GPIO_PAR_SSI0H_TXD_MASK (0xCF) +#define GPIO_PAR_SSI0H_TXD_TXD (0x30) +#define GPIO_PAR_SSI0H_TXD_I2C2SCL (0x20) +#define GPIO_PAR_SSI0H_TXD_SIM1_DAT (0x10) +#define GPIO_PAR_SSI0H_TXD_GPIO (0x00) +#define GPIO_PAR_SSI0H_FS(x) (((x)&0x03)<<2) +#define GPIO_PAR_SSI0H_FS_MASK (0xF3) +#define GPIO_PAR_SSI0H_FS_FS (0x0C) +#define GPIO_PAR_SSI0H_FS_U7TXD (0x08) +#define GPIO_PAR_SSI0H_FS_SIM1_RST (0x04) +#define GPIO_PAR_SSI0H_FS_GPIO (0x00) +#define GPIO_PAR_SSI0H_MCLK(x) ((x)&0x03) +#define GPIO_PAR_SSI0H_MCLK_MASK (0xFC) +#define GPIO_PAR_SSI0H_MCLK_MCLK (0x03) +#define GPIO_PAR_SSI0H_MCLK_SSI_CLKIN (0x02) +#define GPIO_PAR_SSI0H_MCLK_SIM1_CLK (0x01) +#define GPIO_PAR_SSI0H_MCLK_GPIO (0x00) + +#define GPIO_PAR_SSI0L_BCLK(x) ((x)&0x03) +#define GPIO_PAR_SSI0L_BCLK_MASK (0xFC) +#define GPIO_PAR_SSI0L_BCLK_BCLK (0x03) +#define GPIO_PAR_SSI0L_BCLK_U7RXD (0x02) +#define GPIO_PAR_SSI0L_BCLK_SIM1_PD (0x01) +#define GPIO_PAR_SSI0L_BCLK_GPIO (0x00) + +#define GPIO_PAR_DEBUGH1_DAT3 (0x40) +#define GPIO_PAR_DEBUGH1_DAT2 (0x10) +#define GPIO_PAR_DEBUGH1_DAT1 (0x04) +#define GPIO_PAR_DEBUGH1_DAT0 (0x01) + +#define GPIO_PAR_DEBUGH0_PST3 (0x40) +#define GPIO_PAR_DEBUGH0_PST2 (0x10) +#define GPIO_PAR_DEBUGH0_PST1 (0x04) +#define GPIO_PAR_DEBUGH0_PST0 (0x01) + +#define GPIO_PODR_G4_VAL (0x01 << 4) +#define GPIO_PODR_G4_MASK (0xff & ~GPIO_PODR_G4_VAL) +#define GPIO_PDDR_G4_OUTPUT (0x01 << 4) +#define GPIO_PDDR_G4_MASK (0xff & ~GPIO_PDDR_G4_OUTPUT) + +#define GPIO_PAR_DEBUGL_ALLPST (0x01) + +#define GPIO_PAR_FEC_FEC(x) ((x)&0x0F) +#define GPIO_PAR_FEC_FEC_MASK (0xF0) +#define GPIO_PAR_FEC_FEC_GPIO (0x0D) +#define GPIO_PAR_FEC_FEC_RMII1 (0x0C) +#define GPIO_PAR_FEC_FEC_RMII1FUL (0x0B) +#define GPIO_PAR_FEC_FEC_RMII_ULPI (0x0A) +#define GPIO_PAR_FEC_FEC_RMII0 (0x09) +#define GPIO_PAR_FEC_FEC_RMII0FUL_ULPI (0x08) +#define GPIO_PAR_FEC_FEC_RMII0FUL (0x07) +#define GPIO_PAR_FEC_FEC_RMII0_1FUL (0x06) +#define GPIO_PAR_FEC_FEC_RMII0FUL_1 (0x05) /* 0:Full 1: */ +/* Both 0&1: MDC, MDIO, COL & TXER - GPIO */ +#define GPIO_PAR_FEC_FEC_RMII0_1 (0x04) +#define GPIO_PAR_FEC_FEC_RMII0FUL_1FUL (0x03) +#define GPIO_PAR_FEC_FEC_MII (0x01) /* MDC & MDIO - GPIO */ +#define GPIO_PAR_FEC_FEC_MIIFUL (0x00) + + +/* TC: Need to edit here.... */ + +/* Mode Select Control */ +#define GPIO_MSCR_SDRAM_MSC(x) ((x)&0x03) +#define GPIO_MSCR_SDRAM_MSC_MASK (0xFC) + +/* Slew Rate Control */ + +#define GPIO_SRCR_FB3_FB3(x) ((x)&0x03) +#define GPIO_SRCR_FB3_FB3_MASK (0xFC) + +#define GPIO_SRCR_FB2_FB2(x) ((x)&0x03) +#define GPIO_SRCR_FB2_FB2_MASK (0xFC) + +#define GPIO_SRCR_FB1_FB1(x) ((x)&0x03) +#define GPIO_SRCR_FB1_FB1_MASK (0xFC) + +#define GPIO_SRCR_FB4_FB5(x) (((x)&0x03)<<2) +#define GPIO_SRCR_FB4_FB5_MASK (0xF3) +#define GPIO_SRCR_FB4_FB4(x) ((x)&0x03) +#define GPIO_SRCR_FB4_FB4_MASK (0xFC) + +#define GPIO_SRCR_DSPIOW_OWDAT(x) (((x)&0x03)<<4) +#define GPIO_SRCR_DSPIOW_OWDAT_MASK (0xCF) +#define GPIO_SRCR_DSPIOW_DSPI0(x) ((x)&0x03) +#define GPIO_SRCR_DSPIOW_DSPI0_MASK (0xFC) + +#define GPIO_SRCR_CANI2C_CAN1(x) (((x)&0x03)<<2) +#define GPIO_SRCR_CANI2C_CAN1_MASK (0xF3) +#define GPIO_SRCR_CANI2C_I2C0(x) ((x)&0x03) +#define GPIO_SRCR_CANI2C_I2C0_MASK (0xFC) + +#define GPIO_SRCR_IRQ0_IRQ0(x) ((x)&0x03) +#define GPIO_SRCR_IRQ0_IRQ0_MASK (0xFC) + +#define GPIO_SRCR_TIMER_TMR3(x) (((x)&0x03)<<6) +#define GPIO_SRCR_TIMER_TMR3_MASK (0x3F) +#define GPIO_SRCR_TIMER_TMR2(x) (((x)&0x03)<<4) +#define GPIO_SRCR_TIMER_TMR2_MASK (0xCF) +#define GPIO_SRCR_TIMER_TMR1(x) (((x)&0x03)<<2) +#define GPIO_SRCR_TIMER_TMR1_MASK (0xF3) +#define GPIO_SRCR_TIMER_TMR0(x) ((x)&0x03) +#define GPIO_SRCR_TIMER_TMR0_MASK (0xFC) + +#define GPIO_SRCR_UART_U2(x) (((x)&0x03)<<4) +#define GPIO_SRCR_UART_U2_MASK (0xCF) +#define GPIO_SRCR_UART_U1(x) (((x)&0x03)<<2) +#define GPIO_SRCR_UART_U1_MASK (0xF3) +#define GPIO_SRCR_UART_U0(x) ((x)&0x03) +#define GPIO_SRCR_UART_U0_MASK (0xFC) + +#define GPIO_SRCR_FEC_RMII0(x) (((x)&0x03)<<2) +#define GPIO_SRCR_FEC_RMII0_MASK (0xF3) +#define GPIO_SRCR_FEC_RMII1(x) ((x)&0x03) +#define GPIO_SRCR_FEC_RMII1_MASK (0xFC) + +#define GPIO_SRCR_SDHC_SDHC(x) ((x)&0x03) +#define GPIO_SRCR_SDHC_SDHC_MASK (0xFC) + +#define GPIO_SRCR_SIM0_SIMP0(x) ((x)&0x03) +#define GPIO_SRCR_SIM0_SIMP0_MASK (0xFC) + +#define GPIO_SRCR_SSI0_SSI0(x) ((x)&0x03) +#define GPIO_SRCR_SSI0_SSI0_MASK (0xFC) + +#define GPIO_PCR_URTS_U2 (0x0004) +#define GPIO_PCR_URTS_U1 (0x0002) +#define GPIO_PCR_URTS_U0 (0x0001) + +#define GPIO_PCR_UCTS_U2 (0x0004) +#define GPIO_PCR_UCTS_U1 (0x0002) +#define GPIO_PCR_UCTS_U0 (0x0001) + +#define GPIO_UTXD_WOM_U9 (0x0200) +#define GPIO_UTXD_WOM_U8 (0x0100) +#define GPIO_UTXD_WOM_U7 (0x0080) +#define GPIO_UTXD_WOM_U6 (0x0040) +#define GPIO_UTXD_WOM_U5 (0x0020) +#define GPIO_UTXD_WOM_U4 (0x0010) +#define GPIO_UTXD_WOM_U3 (0x0008) +#define GPIO_UTXD_WOM_U2 (0x0004) +#define GPIO_UTXD_WOM_U1 (0x0002) +#define GPIO_UTXD_WOM_U0 (0x0001) + +#define GPIO_URXD_WOM_U9(x) (((x)&3)<<18) +#define GPIO_URXD_WOM_U9_MASK (0xFFF3FFFF) +#define GPIO_URXD_WOM_U8(x) (((x)&3)<<16) +#define GPIO_URXD_WOM_U8_MASK (0xFFFCFFFF) +#define GPIO_URXD_WOM_U7(x) (((x)&3)<<14) +#define GPIO_URXD_WOM_U7_MASK (0xFFFF3FFF) +#define GPIO_URXD_WOM_U6(x) (((x)&3)<<12) +#define GPIO_URXD_WOM_U6_MASK (0xFFFFCFFF) +#define GPIO_URXD_WOM_U5(x) (((x)&3)<<10) +#define GPIO_URXD_WOM_U5_MASK (0xFFFFF3FF) +#define GPIO_URXD_WOM_U4(x) (((x)&3)<<8) +#define GPIO_URXD_WOM_U4_MASK (0xFFFFFCFF) +#define GPIO_URXD_WOM_U3(x) (((x)&3)<<6) +#define GPIO_URXD_WOM_U3_MASK (0xFFFFFF3F) +#define GPIO_URXD_WOM_U2(x) (((x)&3)<<4) +#define GPIO_URXD_WOM_U2_MASK (0xFFFFFFCF) +#define GPIO_URXD_WOM_U1(x) (((x)&3)<<2) +#define GPIO_URXD_WOM_U1_MASK (0xFFFFFFF3) +#define GPIO_URXD_WOM_U0(x) ((x)&3) +#define GPIO_URXD_WOM_U0_MASK (0xFFFFFFFC) + +#define GPIO_HCR1_PG4_0(x) (((x)&0x1F)<<27) +#define GPIO_HCR1_PG4_0_MASK (0x07FFFFFF) +#define GPIO_HCR1_PF7_3(x) (((x)&0x1F)<<22) +#define GPIO_HCR1_PF7_3_MASK (0xF83FFFFF) +#define GPIO_HCR1_PE6_0(x) (((x)&0x7F)<<15) +#define GPIO_HCR1_PE6_0_MASK (0xFFC07FFF) +#define GPIO_HCR1_PD7_3(x) (((x)&0x1F)<<10) +#define GPIO_HCR1_PD7_3_MASK (0xFFFF83FF) +#define GPIO_HCR1_PC7_1(x) (((x)&0x7F)<<3) +#define GPIO_HCR1_PC7_1_MASK (0xFFFFFC07) +#define GPIO_HCR1_PB2_0(x) ((x)&7) +#define GPIO_HCR1_PB2_0_MASK (0xFFFFFFF8) + +#define GPIO_HCR0_PK3 (0x00000400) +#define GPIO_HCR0_PK0 (0x00000200) +#define GPIO_HCR0_PD2_0(x) (((x)&7)<<6) +#define GPIO_HCR0_PD2_0_MASK (0xFFFFFE3F) +#define GPIO_HCR0_PE7 (0x00000020) +#define GPIO_HCR0_PH7_3(x) ((x)&0x1F) +#define GPIO_HCR0_PH7_3_MASK(x) (0xFFFFFFE0) + +/* SDRAM Controller (SDRAMC) */ + +/* Phase Locked Loop (PLL) */ +#define PLL_CR_LOCIRQ (0x00040000) +#define PLL_CR_LOCRE (0x00020000) +#define PLL_CR_LOCEN (0x00010000) +#define PLL_CR_LOLIRQ (0x00004000) +#define PLL_CR_LOLRE (0x00002000) +#define PLL_CR_LOLEN (0x00001000) +#define PLL_CR_REFDIV(x) (((x)&7)<<8) +#define PLL_CR_REFDIV_MASK (0xFFFFF8FF) +#define PLL_CR_FBKDIV(x) ((x)&0x3F) +#define PLL_CR_FBKDIV_MASK (0xFFFFFFC0) +#define PLL_CR_FBKDIV_BITS (0x3F) + +#define PLL_DR_OUTDIV5(x) (((x)&0x1F)<<21) +#define PLL_DR_OUTDIV5_MASK (0xFC1FFFFF) +#define PLL_DR_OUTDIV5_BITS (0x03E00000) +#define PLL_DR_OUTDIV4(x) (((x)&0x1F)<<16) +#define PLL_DR_OUTDIV4_MASK (0xFFE0FFFF) +#define PLL_DR_OUTDIV4_BITS (0x001F0000) +#define PLL_DR_OUTDIV3(x) (((x)&0x1F)<<10) +#define PLL_DR_OUTDIV3_MASK (0xFFFF83FF) +#define PLL_DR_OUTDIV3_BITS (0x00007C00) +#define PLL_DR_OUTDIV2(x) (((x)&0x1F)<<5) +#define PLL_DR_OUTDIV2_MASK (0xFFFFFC1F) +#define PLL_DR_OUTDIV2_BITS (0x000003E0) +#define PLL_DR_OUTDIV1(x) ((x)&0x1F) +#define PLL_DR_OUTDIV1_MASK (0xFFFFFFE0) +#define PLL_DR_OUTDIV1_BITS (0x0000001F) + +#define PLL_SR_LOCF (0x00000200) +#define PLL_SR_LOC (0x00000100) +#define PLL_SR_LOLF (0x00000040) +#define PLL_SR_LOCKS (0x00000020) +#define PLL_SR_LOCK (0x00000010) +#define PLL_PSR_LOCK PLL_SR_LOCK /* compatible with 5x */ +#define PLL_SR_MODE(x) ((x)&7) +#define PLL_SR_MODE_MASK (0xFFFFFFF8) + +#endif /* __MCF5441X__ */ diff --git a/arch/m68k/include/asm/u-boot.h b/arch/m68k/include/asm/u-boot.h index 973c9ee098..8c7c554a46 100644 --- a/arch/m68k/include/asm/u-boot.h +++ b/arch/m68k/include/asm/u-boot.h @@ -58,7 +58,7 @@ typedef struct bd_info { unsigned long bi_vcofreq; /* vco Freq in MHz */ unsigned long bi_flbfreq; /* Flexbus Freq in MHz */ #endif - unsigned long bi_baudrate; /* Console Baudrate */ + unsigned int bi_baudrate; /* Console Baudrate */ } bd_t; #endif /* __ASSEMBLY__ */ diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 67c9a1382e..02d73fda61 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -29,6 +29,7 @@ #include <command.h> #include <malloc.h> #include <stdio_dev.h> +#include <linux/compiler.h> #include <asm/immap.h> @@ -387,7 +388,7 @@ board_init_f (ulong bootflag) */ void board_init_r (gd_t *id, ulong dest_addr) { - char *s; + char *s __maybe_unused; bd_t *bd; #ifndef CONFIG_ENV_IS_NOWHERE @@ -415,8 +416,8 @@ void board_init_r (gd_t *id, ulong dest_addr) /* * We have to relocate the command table manually */ - fixup_cmdtable(&__u_boot_cmd_start, - (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); + fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd), + ll_entry_count(cmd_tbl_t, cmd)); #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ diff --git a/arch/microblaze/cpu/cache.c b/arch/microblaze/cpu/cache.c index d258a69382..ce066b96e9 100644 --- a/arch/microblaze/cpu/cache.c +++ b/arch/microblaze/cpu/cache.c @@ -61,12 +61,7 @@ void dcache_enable (void) { void dcache_disable(void) { #ifdef XILINX_USE_DCACHE -#ifdef XILINX_DCACHE_BYTE_SIZE flush_cache(0, XILINX_DCACHE_BYTE_SIZE); -#else -#warning please rebuild BSPs and update configuration - flush_cache(0, 32768); -#endif #endif MSRCLR(0x80); } diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S index 8564c4e30a..3da711d4d5 100644 --- a/arch/microblaze/cpu/start.S +++ b/arch/microblaze/cpu/start.S @@ -132,6 +132,12 @@ _start: rsubi r8, r10, 0x26 sh r6, r0, r8 + /* Flush cache before enable cache */ + addik r5, r0, 0 + addik r6, r0, XILINX_DCACHE_BYTE_SIZE +flush: bralid r15, flush_cache + nop + /* enable instruction and data cache */ mfs r12, rmsr ori r12, r12, 0xa0 diff --git a/arch/microblaze/cpu/u-boot.lds b/arch/microblaze/cpu/u-boot.lds index d033a2835b..fe3d97dad8 100644 --- a/arch/microblaze/cpu/u-boot.lds +++ b/arch/microblaze/cpu/u-boot.lds @@ -45,17 +45,16 @@ SECTIONS .data ALIGN(0x4): { __data_start = .; +#ifdef CONFIG_OF_EMBED dts/libdts.o (.data) +#endif *(.data) __data_end = .; } - .u_boot_cmd ALIGN(0x4): - { - . = .; - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> } .bss ALIGN(0x4): diff --git a/arch/microblaze/include/asm/bitops.h b/arch/microblaze/include/asm/bitops.h index e8c835f7c0..eafa2b576b 100644 --- a/arch/microblaze/include/asm/bitops.h +++ b/arch/microblaze/include/asm/bitops.h @@ -319,7 +319,8 @@ extern __inline__ int ext2_test_bit(int nr, const volatile void * addr) #define ext2_find_first_zero_bit(addr, size) \ ext2_find_next_zero_bit((addr), (size), 0) -extern __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset) +static inline unsigned long ext2_find_next_zero_bit(void *addr, + unsigned long size, unsigned long offset) { unsigned long *p = ((unsigned long *) addr) + (offset >> 5); unsigned long result = offset & ~31UL; diff --git a/arch/microblaze/include/asm/byteorder.h b/arch/microblaze/include/asm/byteorder.h index b2757a41f8..f3a471d1b2 100644 --- a/arch/microblaze/include/asm/byteorder.h +++ b/arch/microblaze/include/asm/byteorder.h @@ -20,29 +20,6 @@ #ifdef __GNUC__ -/* This is effectively a dupe of the arch-independent byteswap - code in include/linux/byteorder/swab.h, however we force a cast - of the result up to 32 bits. This in turn forces the compiler - to explicitly clear the high 16 bits, which it wasn't doing otherwise. - - I think this is a symptom of a bug in mb-gcc. JW 20040303 -*/ - - -static __inline__ __u16 ___arch__swab16 (__u16 half_word) -{ - /* 32 bit temp to cast result, forcing clearing of high word */ - __u32 temp; - - temp = ((half_word & 0x00FFU) << 8) | ((half_word & 0xFF00U) >> 8); - - return (__u16) temp; -} - -#define __arch__swab16(x) ___arch__swab16(x) - -/* Microblaze has no arch-specific endian conversion insns */ - #if !defined(__STRICT_ANSI__) || defined(__KERNEL__) # define __BYTEORDER_HAS_U64__ # define __SWAB_64_THRU_32__ diff --git a/arch/microblaze/include/asm/global_data.h b/arch/microblaze/include/asm/global_data.h index de3b8dbe92..2111c7cba2 100644 --- a/arch/microblaze/include/asm/global_data.h +++ b/arch/microblaze/include/asm/global_data.h @@ -35,7 +35,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER unsigned long precon_buf_idx; /* Pre-Console buffer index */ diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h index 9a2cc663ec..38dc5aa85d 100644 --- a/arch/microblaze/include/asm/posix_types.h +++ b/arch/microblaze/include/asm/posix_types.h @@ -16,9 +16,6 @@ #ifndef __MICROBLAZE_POSIX_TYPES_H__ #define __MICROBLAZE_POSIX_TYPES_H__ -#include <asm/bitops.h> - - typedef unsigned int __kernel_dev_t; typedef unsigned long __kernel_ino_t; typedef unsigned long long __kernel_ino64_t; diff --git a/arch/microblaze/include/asm/u-boot.h b/arch/microblaze/include/asm/u-boot.h index a0b1dbf9e6..8d00658564 100644 --- a/arch/microblaze/include/asm/u-boot.h +++ b/arch/microblaze/include/asm/u-boot.h @@ -40,7 +40,7 @@ typedef struct bd_info { unsigned long bi_flashoffset; /* reserved area for startup monitor */ unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ - unsigned long bi_baudrate; /* Console Baudrate */ + unsigned int bi_baudrate; /* Console Baudrate */ } bd_t; /* For image.h:image_check_target_arch() */ diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib/bootm.c index 95cee509d2..66d21f4ef6 100644 --- a/arch/microblaze/lib/bootm.c +++ b/arch/microblaze/lib/bootm.c @@ -70,12 +70,7 @@ int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *ima #endif #ifdef XILINX_USE_DCACHE -#ifdef XILINX_DCACHE_BYTE_SIZE flush_cache(0, XILINX_DCACHE_BYTE_SIZE); -#else -#warning please rebuild BSPs and update configuration - flush_cache(0, 32768); -#endif #endif /* * Linux Kernel Parameters (passing device tree): diff --git a/arch/mips/cpu/mips32/au1x00/Makefile b/arch/mips/cpu/mips32/au1x00/Makefile index dc58475f68..b9f895df5b 100644 --- a/arch/mips/cpu/mips32/au1x00/Makefile +++ b/arch/mips/cpu/mips32/au1x00/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o -COBJS = au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o +COBJS = au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o au1x00_ide.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/bmw/m48t59y.h b/arch/mips/cpu/mips32/au1x00/au1x00_ide.c index 717300d957..932cdfb9bb 100644 --- a/board/bmw/m48t59y.h +++ b/arch/mips/cpu/mips32/au1x00/au1x00_ide.c @@ -1,13 +1,7 @@ /* - * SGS M48-T59Y TOD/NVRAM Driver - * - * (C) Copyright 2000 + * (C) Copyright 2000-2011 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp. - * - * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp. - * * See file CREDITS for list of people who contributed to this * project. * @@ -25,33 +19,14 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA + * */ -#ifndef __M48_T59_Y_H -#define __M48_T59_Y_H - -/* - * M48 T59Y -Timekeeping Battery backed SRAM. - */ - -int m48_tod_init(void); - -int m48_tod_set(int year, - int month, - int day, - int hour, - int minute, - int second); - -int m48_tod_get(int *year, - int *month, - int *day, - int *hour, - int *minute, - int *second); - -int m48_tod_get_second(void); - -void m48_watchdog_arm(int usec); +#include <common.h> +#include <ide.h> -#endif /*!__M48_T59_Y_H */ +/* AU1X00 swaps data in big-endian mode, enforce little-endian function */ +void ide_input_swap_data(int dev, ulong *sect_buf, int words) +{ + ide_input_data(dev, sect_buf, words); +} diff --git a/arch/mips/cpu/mips32/au1x00/au1x00_serial.c b/arch/mips/cpu/mips32/au1x00/au1x00_serial.c index 0beac98fde..3e85b90cde 100644 --- a/arch/mips/cpu/mips32/au1x00/au1x00_serial.c +++ b/arch/mips/cpu/mips32/au1x00/au1x00_serial.c @@ -103,12 +103,6 @@ static void au1x00_serial_putc(const char c) *uart_tx = (u32)c; } -static void au1x00_serial_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - static int au1x00_serial_getc(void) { volatile u32 *uart_rx = (volatile u32*)(UART0_ADDR+UART_RX); @@ -137,7 +131,7 @@ static struct serial_device au1x00_serial_drv = { .stop = NULL, .setbrg = au1x00_serial_setbrg, .putc = au1x00_serial_putc, - .puts = au1x00_serial_puts, + .puts = default_serial_puts, .getc = au1x00_serial_getc, .tstc = au1x00_serial_tstc, }; diff --git a/arch/mips/cpu/mips32/cache.S b/arch/mips/cpu/mips32/cache.S index e683e8be8c..64dfad0263 100644 --- a/arch/mips/cpu/mips32/cache.S +++ b/arch/mips/cpu/mips32/cache.S @@ -85,17 +85,17 @@ LEAF(mips_init_icache) /* clear tag to invalidate */ PTR_LI t0, INDEX_BASE PTR_ADDU t1, t0, a1 -1: cache_op Index_Store_Tag_I t0 +1: cache_op INDEX_STORE_TAG_I t0 PTR_ADDU t0, a2 bne t0, t1, 1b /* fill once, so data field parity is correct */ PTR_LI t0, INDEX_BASE -2: cache_op Fill t0 +2: cache_op FILL t0 PTR_ADDU t0, a2 bne t0, t1, 2b /* invalidate again - prudent but not strictly neccessary */ PTR_LI t0, INDEX_BASE -1: cache_op Index_Store_Tag_I t0 +1: cache_op INDEX_STORE_TAG_I t0 PTR_ADDU t0, a2 bne t0, t1, 1b 9: jr ra @@ -110,7 +110,7 @@ LEAF(mips_init_dcache) /* clear all tags */ PTR_LI t0, INDEX_BASE PTR_ADDU t1, t0, a1 -1: cache_op Index_Store_Tag_D t0 +1: cache_op INDEX_STORE_TAG_D t0 PTR_ADDU t0, a2 bne t0, t1, 1b /* load from each line (in cached space) */ @@ -120,7 +120,7 @@ LEAF(mips_init_dcache) bne t0, t1, 2b /* clear all tags */ PTR_LI t0, INDEX_BASE -1: cache_op Index_Store_Tag_D t0 +1: cache_op INDEX_STORE_TAG_D t0 PTR_ADDU t0, a2 bne t0, t1, 1b 9: jr ra diff --git a/arch/mips/cpu/mips32/cpu.c b/arch/mips/cpu/mips32/cpu.c index 7b49e1b612..50bb248bd0 100644 --- a/arch/mips/cpu/mips32/cpu.c +++ b/arch/mips/cpu/mips32/cpu.c @@ -61,8 +61,8 @@ void flush_cache(ulong start_addr, ulong size) return; while (1) { - cache_op(Hit_Writeback_Inv_D, addr); - cache_op(Hit_Invalidate_I, addr); + cache_op(HIT_WRITEBACK_INV_D, addr); + cache_op(HIT_INVALIDATE_I, addr); if (addr == aend) break; addr += lsize; @@ -76,7 +76,7 @@ void flush_dcache_range(ulong start_addr, ulong stop) unsigned long aend = (stop - 1) & ~(lsize - 1); while (1) { - cache_op(Hit_Writeback_Inv_D, addr); + cache_op(HIT_WRITEBACK_INV_D, addr); if (addr == aend) break; addr += lsize; @@ -90,7 +90,7 @@ void invalidate_dcache_range(ulong start_addr, ulong stop) unsigned long aend = (stop - 1) & ~(lsize - 1); while (1) { - cache_op(Hit_Invalidate_D, addr); + cache_op(HIT_INVALIDATE_D, addr); if (addr == aend) break; addr += lsize; diff --git a/arch/mips/cpu/mips32/incaip/asc_serial.c b/arch/mips/cpu/mips32/incaip/asc_serial.c index 08949f4fb0..6f0e4f2520 100644 --- a/arch/mips/cpu/mips32/incaip/asc_serial.c +++ b/arch/mips/cpu/mips32/incaip/asc_serial.c @@ -236,14 +236,6 @@ static void asc_serial_putc(const char c) } } -static void asc_serial_puts(const char *s) -{ - while (*s) - { - serial_putc (*s++); - } -} - static int asc_serial_getc(void) { ulong symbol_mask; @@ -292,7 +284,7 @@ static struct serial_device asc_serial_drv = { .stop = NULL, .setbrg = asc_serial_setbrg, .putc = asc_serial_putc, - .puts = asc_serial_puts, + .puts = default_serial_puts, .getc = asc_serial_getc, .tstc = asc_serial_tstc, }; diff --git a/arch/arm/cpu/lh7a40x/Makefile b/arch/mips/cpu/mips64/Makefile index 01cf7f5455..be38664844 100644 --- a/arch/arm/cpu/lh7a40x/Makefile +++ b/arch/mips/cpu/mips64/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000-2006 +# (C) Copyright 2003-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -26,10 +26,10 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).o START = start.o -COBJS = cpu.o speed.o timer.o +COBJS-y = cpu.o interrupts.o time.o cache.o -SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) START := $(addprefix $(obj),$(START)) all: $(obj).depend $(START) $(LIB) @@ -43,5 +43,3 @@ $(LIB): $(OBJS) include $(SRCTREE)/rules.mk sinclude $(obj).depend - -######################################################################### diff --git a/arch/mips/cpu/mips64/cache.S b/arch/mips/cpu/mips64/cache.S new file mode 100644 index 0000000000..036f035d96 --- /dev/null +++ b/arch/mips/cpu/mips64/cache.S @@ -0,0 +1,229 @@ +/* + * Cache-handling routined for MIPS CPUs + * + * Copyright (c) 2003 Wolfgang Denk <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm-offsets.h> +#include <config.h> +#include <asm/asm.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/addrspace.h> +#include <asm/cacheops.h> + +#define RA t9 + +/* + * 16kB is the maximum size of instruction and data caches on MIPS 4K, + * 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience. + * + * Note that the above size is the maximum size of primary cache. U-Boot + * doesn't have L2 cache support for now. + */ +#define MIPS_MAX_CACHE_SIZE 0x10000 + +#define INDEX_BASE CKSEG0 + + .macro cache_op op addr + .set push + .set noreorder + .set mips3 + cache \op, 0(\addr) + .set pop + .endm + + .macro f_fill64 dst, offset, val + LONG_S \val, (\offset + 0 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 1 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 2 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 3 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 4 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 5 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 6 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 7 * LONGSIZE)(\dst) +#if LONGSIZE == 4 + LONG_S \val, (\offset + 8 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 9 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 10 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 11 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 12 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 13 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 14 * LONGSIZE)(\dst) + LONG_S \val, (\offset + 15 * LONGSIZE)(\dst) +#endif + .endm + +/* + * mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz) + */ +LEAF(mips_init_icache) + blez a1, 9f + mtc0 zero, CP0_TAGLO + /* clear tag to invalidate */ + PTR_LI t0, INDEX_BASE + PTR_ADDU t1, t0, a1 +1: cache_op INDEX_STORE_TAG_I t0 + PTR_ADDU t0, a2 + bne t0, t1, 1b + /* fill once, so data field parity is correct */ + PTR_LI t0, INDEX_BASE +2: cache_op FILL t0 + PTR_ADDU t0, a2 + bne t0, t1, 2b + /* invalidate again - prudent but not strictly neccessary */ + PTR_LI t0, INDEX_BASE +1: cache_op INDEX_STORE_TAG_I t0 + PTR_ADDU t0, a2 + bne t0, t1, 1b +9: jr ra + END(mips_init_icache) + +/* + * mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz) + */ +LEAF(mips_init_dcache) + blez a1, 9f + mtc0 zero, CP0_TAGLO + /* clear all tags */ + PTR_LI t0, INDEX_BASE + PTR_ADDU t1, t0, a1 +1: cache_op INDEX_STORE_TAG_D t0 + PTR_ADDU t0, a2 + bne t0, t1, 1b + /* load from each line (in cached space) */ + PTR_LI t0, INDEX_BASE +2: LONG_L zero, 0(t0) + PTR_ADDU t0, a2 + bne t0, t1, 2b + /* clear all tags */ + PTR_LI t0, INDEX_BASE +1: cache_op INDEX_STORE_TAG_D t0 + PTR_ADDU t0, a2 + bne t0, t1, 1b +9: jr ra + END(mips_init_dcache) + +/* + * mips_cache_reset - low level initialisation of the primary caches + * + * This routine initialises the primary caches to ensure that they have good + * parity. It must be called by the ROM before any cached locations are used + * to prevent the possibility of data with bad parity being written to memory. + * + * To initialise the instruction cache it is essential that a source of data + * with good parity is available. This routine will initialise an area of + * memory starting at location zero to be used as a source of parity. + * + * RETURNS: N/A + * + */ +NESTED(mips_cache_reset, 0, ra) + move RA, ra + li t2, CONFIG_SYS_ICACHE_SIZE + li t3, CONFIG_SYS_DCACHE_SIZE + li t8, CONFIG_SYS_CACHELINE_SIZE + + li v0, MIPS_MAX_CACHE_SIZE + + /* + * Now clear that much memory starting from zero. + */ + PTR_LI a0, CKSEG1 + PTR_ADDU a1, a0, v0 +2: PTR_ADDIU a0, 64 + f_fill64 a0, -64, zero + bne a0, a1, 2b + + /* + * The caches are probably in an indeterminate state, + * so we force good parity into them by doing an + * invalidate, load/fill, invalidate for each line. + */ + + /* + * Assume bottom of RAM will generate good parity for the cache. + */ + + /* + * Initialize the I-cache first, + */ + move a1, t2 + move a2, t8 + PTR_LA v1, mips_init_icache + jalr v1 + + /* + * then initialize D-cache. + */ + move a1, t3 + move a2, t8 + PTR_LA v1, mips_init_dcache + jalr v1 + + jr RA + END(mips_cache_reset) + +/* + * dcache_status - get cache status + * + * RETURNS: 0 - cache disabled; 1 - cache enabled + * + */ +LEAF(dcache_status) + mfc0 t0, CP0_CONFIG + li t1, CONF_CM_UNCACHED + andi t0, t0, CONF_CM_CMASK + move v0, zero + beq t0, t1, 2f + li v0, 1 +2: jr ra + END(dcache_status) + +/* + * dcache_disable - disable cache + * + * RETURNS: N/A + * + */ +LEAF(dcache_disable) + mfc0 t0, CP0_CONFIG + li t1, -8 + and t0, t0, t1 + ori t0, t0, CONF_CM_UNCACHED + mtc0 t0, CP0_CONFIG + jr ra + END(dcache_disable) + +/* + * dcache_enable - enable cache + * + * RETURNS: N/A + * + */ +LEAF(dcache_enable) + mfc0 t0, CP0_CONFIG + ori t0, CONF_CM_CMASK + xori t0, CONF_CM_CMASK + ori t0, CONF_CM_CACHABLE_NONCOHERENT + mtc0 t0, CP0_CONFIG + jr ra + END(dcache_enable) diff --git a/arch/arm/cpu/lh7a40x/config.mk b/arch/mips/cpu/mips64/config.mk index 1c4aa97eaa..ebc1ceb83b 100644 --- a/arch/arm/cpu/lh7a40x/config.mk +++ b/arch/mips/cpu/mips64/config.mk @@ -1,6 +1,6 @@ # -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> +# (C) Copyright 2003 +# Wolfgang Denk, DENX Software Engineering, <wd@denx.de> # # See file CREDITS for list of people who contributed to this # project. @@ -21,13 +21,20 @@ # MA 02111-1307 USA # -PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float - -PLATFORM_CPPFLAGS += -march=armv4 -# ========================================================================= # -# Supply options according to compiler version +# Default optimization level for MIPS64 +# +# Note: Toolchains with binutils prior to v2.16 +# are no longer supported by U-Boot MIPS tree! # -# ======================================================================== -PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) +MIPSFLAGS = -march=mips64 + +PLATFORM_CPPFLAGS += $(MIPSFLAGS) +PLATFORM_CPPFLAGS += -mabi=64 -DCONFIG_64BIT +ifdef CONFIG_SYS_BIG_ENDIAN +PLATFORM_LDFLAGS += -m elf64btsmip +else +PLATFORM_LDFLAGS += -m elf64ltsmip +endif + +CONFIG_STANDALONE_LOAD_ADDR ?= 0xffffffff80200000 -T mips64.lds diff --git a/arch/mips/cpu/mips64/cpu.c b/arch/mips/cpu/mips64/cpu.c new file mode 100644 index 0000000000..2a38d0c8d0 --- /dev/null +++ b/arch/mips/cpu/mips64/cpu.c @@ -0,0 +1,111 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <netdev.h> +#include <asm/mipsregs.h> +#include <asm/cacheops.h> +#include <asm/reboot.h> + +#define cache_op(op, addr) \ + __asm__ __volatile__( \ + " .set push\n" \ + " .set noreorder\n" \ + " .set mips64\n" \ + " cache %0, %1\n" \ + " .set pop\n" \ + : \ + : "i" (op), "R" (*(unsigned char *)(addr))) + +void __attribute__((weak)) _machine_restart(void) +{ + fprintf(stderr, "*** reset failed ***\n"); + + while (1) + /* NOP */; +} + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + _machine_restart(); + + return 0; +} + +void flush_cache(ulong start_addr, ulong size) +{ + unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE; + unsigned long addr = start_addr & ~(lsize - 1); + unsigned long aend = (start_addr + size - 1) & ~(lsize - 1); + + /* aend will be miscalculated when size is zero, so we return here */ + if (size == 0) + return; + + while (1) { + cache_op(HIT_WRITEBACK_INV_D, addr); + cache_op(HIT_INVALIDATE_I, addr); + if (addr == aend) + break; + addr += lsize; + } +} + +void flush_dcache_range(ulong start_addr, ulong stop) +{ + unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE; + unsigned long addr = start_addr & ~(lsize - 1); + unsigned long aend = (stop - 1) & ~(lsize - 1); + + while (1) { + cache_op(HIT_WRITEBACK_INV_D, addr); + if (addr == aend) + break; + addr += lsize; + } +} + +void invalidate_dcache_range(ulong start_addr, ulong stop) +{ + unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE; + unsigned long addr = start_addr & ~(lsize - 1); + unsigned long aend = (stop - 1) & ~(lsize - 1); + + while (1) { + cache_op(HIT_INVALIDATE_D, addr); + if (addr == aend) + break; + addr += lsize; + } +} + +void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1) +{ + write_c0_entrylo0(low0); + write_c0_pagemask(pagemask); + write_c0_entrylo1(low1); + write_c0_entryhi(hi); + write_c0_index(index); + tlb_write_indexed(); +} diff --git a/arch/mips/cpu/mips64/interrupts.c b/arch/mips/cpu/mips64/interrupts.c new file mode 100644 index 0000000000..e4e9aae0ca --- /dev/null +++ b/arch/mips/cpu/mips64/interrupts.c @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mipsregs.h> + +void enable_interrupts(void) +{ +} + +int disable_interrupts(void) +{ + return 0; +} diff --git a/arch/mips/cpu/mips64/start.S b/arch/mips/cpu/mips64/start.S new file mode 100644 index 0000000000..4112de7026 --- /dev/null +++ b/arch/mips/cpu/mips64/start.S @@ -0,0 +1,256 @@ +/* + * Startup Code for MIPS64 CPU-core + * + * Copyright (c) 2003 Wolfgang Denk <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any dlater version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICUdlaR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Pdlace, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm-offsets.h> +#include <config.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> + +#ifndef CONFIG_SYS_MIPS_CACHE_MODE +#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT +#endif + + /* + * For the moment disable interrupts, mark the kernel mode and + * set ST0_KX so that the CPU does not spit fire when using + * 64-bit addresses. + */ + .macro setup_c0_status set clr + .set push + mfc0 t0, CP0_STATUS + or t0, ST0_CU0 | \set | 0x1f | \clr + xor t0, 0x1f | \clr + mtc0 t0, CP0_STATUS + .set noreorder + sll zero, 3 # ehb + .set pop + .endm + + .set noreorder + + .globl _start + .text +_start: + .org 0x000 + b reset + nop + .org 0x080 + b romReserved + nop + .org 0x100 + b romReserved + nop + .org 0x180 + b romReserved + nop + .org 0x200 + b romReserved + nop + .org 0x280 + b romReserved + nop + .org 0x300 + b romReserved + nop + .org 0x380 + b romReserved + nop + .org 0x480 + b romReserved + nop + + /* + * We hope there are no more reserved vectors! + * 128 * 8 == 1024 == 0x400 + * so this is address R_VEC+0x400 == 0xbfc00400 + */ + .org 0x500 + .align 4 +reset: + + /* Clear watch registers */ + dmtc0 zero, CP0_WATCHLO + dmtc0 zero, CP0_WATCHHI + + /* WP(Watch Pending), SW0/1 should be cleared */ + mtc0 zero, CP0_CAUSE + + setup_c0_status ST0_KX 0 + + /* Init Timer */ + mtc0 zero, CP0_COUNT + mtc0 zero, CP0_COMPARE + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + /* CONFIG0 register */ + dli t0, CONF_CM_UNCACHED + mtc0 t0, CP0_CONFIG +#endif + + /* Initialize $gp */ + bal 1f + nop + .dword _gp +1: + ld gp, 0(ra) + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + /* Initialize any external memory */ + dla t9, lowlevel_init + jalr t9 + nop + + /* Initialize caches... */ + dla t9, mips_cache_reset + jalr t9 + nop + + /* ... and enable them */ + dli t0, CONFIG_SYS_MIPS_CACHE_MODE + mtc0 t0, CP0_CONFIG +#endif + + /* Set up temporary stack */ + dli t0, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET + dla sp, 0(t0) + + dla t9, board_init_f + jr t9 + nop + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * a0 = addr_sp + * a1 = gd + * a2 = destination address + */ + .globl relocate_code + .ent relocate_code +relocate_code: + move sp, a0 # set new stack pointer + + dli t0, CONFIG_SYS_MONITOR_BASE + dla t3, in_ram + ld t2, -24(t3) # t2 <-- uboot_end_data + move t1, a2 + move s2, a2 # s2 <-- destination address + + /* + * Fix $gp: + * + * New $gp = (Old $gp - CONFIG_SYS_MONITOR_BASE) + Destination Address + */ + move t8, gp + dsub gp, CONFIG_SYS_MONITOR_BASE + dadd gp, a2 # gp now adjusted + dsub s1, gp, t8 # s1 <-- relocation offset + + /* + * t0 = source address + * t1 = target address + * t2 = source end address + */ + + /* + * Save destination address and size for dlater usage in flush_cache() + */ + move s0, a1 # save gd in s0 + move a0, t1 # a0 <-- destination addr + dsub a1, t2, t0 # a1 <-- size + +1: + lw t3, 0(t0) + sw t3, 0(t1) + daddu t0, 4 + ble t0, t2, 1b + daddu t1, 4 + + /* If caches were enabled, we would have to flush them here. */ + + /* a0 & a1 are already set up for flush_cache(start, size) */ + dla t9, flush_cache + jalr t9 + nop + + /* Jump to where we've relocated ourselves */ + daddi t0, s2, in_ram - _start + jr t0 + nop + + .dword _gp + .dword _GLOBAL_OFFSET_TABLE_ + .dword uboot_end_data + .dword uboot_end + .dword num_got_entries + +in_ram: + /* + * Now we want to update GOT. + * + * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object + * generated by GNU ld. Skip these reserved entries from relocation. + */ + ld t3, -8(t0) # t3 <-- num_got_entries + ld t8, -32(t0) # t8 <-- _GLOBAL_OFFSET_TABLE_ + ld t9, -40(t0) # t9 <-- _gp + dsub t8, t9 # compute offset + dadd t8, t8, gp # t8 now holds relocated _G_O_T_ + daddi t8, t8, 16 # skipping first two entries + dli t2, 2 +1: + ld t1, 0(t8) + beqz t1, 2f + dadd t1, s1 + sd t1, 0(t8) +2: + daddi t2, 1 + blt t2, t3, 1b + daddi t8, 8 + + /* Clear BSS */ + ld t1, -24(t0) # t1 <-- uboot_end_data + ld t2, -16(t0) # t2 <-- uboot_end + dadd t1, s1 # adjust pointers + dadd t2, s1 + + dsub t1, 8 +1: + daddi t1, 8 + bltl t1, t2, 1b + sd zero, 0(t1) + + move a0, s0 # a0 <-- gd + dla t9, board_init_r + jr t9 + move a1, s2 + + .end relocate_code + + /* Exception handlers */ +romReserved: + b romReserved diff --git a/arch/mips/cpu/mips64/time.c b/arch/mips/cpu/mips64/time.c new file mode 100644 index 0000000000..51542808dd --- /dev/null +++ b/arch/mips/cpu/mips64/time.c @@ -0,0 +1,87 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mipsregs.h> + +static unsigned long timestamp; + +/* how many counter cycles in a jiffy */ +#define CYCLES_PER_JIFFY \ + (CONFIG_SYS_MIPS_TIMER_FREQ + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ + +/* + * timer without interrupts + */ + +int timer_init(void) +{ + /* Set up the timer for the first expiration. */ + timestamp = 0; + write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY); + + return 0; +} + +ulong get_timer(ulong base) +{ + unsigned int count; + unsigned int expirelo = read_c0_compare(); + + /* Check to see if we have missed any timestamps. */ + count = read_c0_count(); + while ((count - expirelo) < 0x7fffffff) { + expirelo += CYCLES_PER_JIFFY; + timestamp++; + } + write_c0_compare(expirelo); + + return timestamp - base; +} + +void __udelay(unsigned long usec) +{ + unsigned int tmo; + + tmo = read_c0_count() + (usec * (CONFIG_SYS_MIPS_TIMER_FREQ / 1000000)); + while ((tmo - read_c0_count()) < 0x7fffffff) + /*NOP*/; +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On MIPS it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On MIPS it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ; +} diff --git a/arch/mips/cpu/xburst/cpu.c b/arch/mips/cpu/xburst/cpu.c index ddcbfaa47c..cc190dfe56 100644 --- a/arch/mips/cpu/xburst/cpu.c +++ b/arch/mips/cpu/xburst/cpu.c @@ -84,8 +84,8 @@ void flush_cache(ulong start_addr, ulong size) unsigned long aend = (start_addr + size - 1) & ~(lsize - 1); for (; addr <= aend; addr += lsize) { - cache_op(Hit_Writeback_Inv_D, addr); - cache_op(Hit_Invalidate_I, addr); + cache_op(HIT_WRITEBACK_INV_D, addr); + cache_op(HIT_INVALIDATE_I, addr); } } @@ -96,7 +96,7 @@ void flush_dcache_range(ulong start_addr, ulong stop) unsigned long aend = (stop - 1) & ~(lsize - 1); for (; addr <= aend; addr += lsize) - cache_op(Hit_Writeback_Inv_D, addr); + cache_op(HIT_WRITEBACK_INV_D, addr); } void invalidate_dcache_range(ulong start_addr, ulong stop) @@ -106,7 +106,7 @@ void invalidate_dcache_range(ulong start_addr, ulong stop) unsigned long aend = (stop - 1) & ~(lsize - 1); for (; addr <= aend; addr += lsize) - cache_op(Hit_Invalidate_D, addr); + cache_op(HIT_INVALIDATE_D, addr); } void flush_icache_all(void) @@ -118,7 +118,7 @@ void flush_icache_all(void) for (addr = CKSEG0; addr < CKSEG0 + CONFIG_SYS_ICACHE_SIZE; addr += CONFIG_SYS_CACHELINE_SIZE) { - cache_op(Index_Store_Tag_I, addr); + cache_op(INDEX_STORE_TAG_I, addr); } /* invalidate btb */ @@ -139,7 +139,7 @@ void flush_dcache_all(void) for (addr = CKSEG0; addr < CKSEG0 + CONFIG_SYS_DCACHE_SIZE; addr += CONFIG_SYS_CACHELINE_SIZE) { - cache_op(Index_Writeback_Inv_D, addr); + cache_op(INDEX_WRITEBACK_INV_D, addr); } __asm__ __volatile__("sync"); diff --git a/arch/mips/cpu/xburst/jz_serial.c b/arch/mips/cpu/xburst/jz_serial.c index 3199007757..a147657350 100644 --- a/arch/mips/cpu/xburst/jz_serial.c +++ b/arch/mips/cpu/xburst/jz_serial.c @@ -109,19 +109,13 @@ static int jz_serial_getc(void) return readb(&uart->rbr_thr_dllr); } -static void jz_serial_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - static struct serial_device jz_serial_drv = { .name = "jz_serial", .start = jz_serial_init, .stop = NULL, .setbrg = jz_serial_setbrg, .putc = jz_serial_putc, - .puts = jz_serial_puts, + .puts = default_serial_puts, .getc = jz_serial_getc, .tstc = jz_serial_tstc, }; diff --git a/arch/mips/cpu/xburst/start.S b/arch/mips/cpu/xburst/start.S index d846104d10..3a8280cb0a 100644 --- a/arch/mips/cpu/xburst/start.S +++ b/arch/mips/cpu/xburst/start.S @@ -96,7 +96,7 @@ relocate_code: li t0, KSEG0 addi t1, t0, CONFIG_SYS_DCACHE_SIZE 2: - cache Index_Writeback_Inv_D, 0(t0) + cache INDEX_WRITEBACK_INV_D, 0(t0) bne t0, t1, 2b addi t0, CONFIG_SYS_CACHELINE_SIZE @@ -106,7 +106,7 @@ relocate_code: li t0, KSEG0 addi t1, t0, CONFIG_SYS_ICACHE_SIZE 3: - cache Index_Invalidate_I, 0(t0) + cache INDEX_INVALIDATE_I, 0(t0) bne t0, t1, 3b addi t0, CONFIG_SYS_CACHELINE_SIZE diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h index 3a1e6d615f..b768bb5081 100644 --- a/arch/mips/include/asm/addrspace.h +++ b/arch/mips/include/asm/addrspace.h @@ -136,7 +136,7 @@ cannot access physical memory directly from core */ #define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000) #else /* !CONFIG_SOC_AU1X00 */ -#define UNCACHED_SDRAM(a) KSEG1ADDR(a) +#define UNCACHED_SDRAM(a) CKSEG1ADDR(a) #endif /* CONFIG_SOC_AU1X00 */ #endif /* __ASSEMBLY__ */ diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h index 608cfcfbb3..933ccb1b78 100644 --- a/arch/mips/include/asm/asm.h +++ b/arch/mips/include/asm/asm.h @@ -401,7 +401,7 @@ symbol = value #ifdef CONFIG_SGI_IP28 /* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */ #include <asm/cacheops.h> -#define R10KCBARRIER(addr) cache Cache_Barrier, addr; +#define R10KCBARRIER(addr) cache CACHE_BARRIER, addr; #else #define R10KCBARRIER(addr) #endif diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h index 70bcad7694..6464250d84 100644 --- a/arch/mips/include/asm/cacheops.h +++ b/arch/mips/include/asm/cacheops.h @@ -14,54 +14,54 @@ /* * Cache Operations available on all MIPS processors with R4000-style caches */ -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 -#define Index_Load_Tag_I 0x04 -#define Index_Load_Tag_D 0x05 -#define Index_Store_Tag_I 0x08 -#define Index_Store_Tag_D 0x09 +#define INDEX_INVALIDATE_I 0x00 +#define INDEX_WRITEBACK_INV_D 0x01 +#define INDEX_LOAD_TAG_I 0x04 +#define INDEX_LOAD_TAG_D 0x05 +#define INDEX_STORE_TAG_I 0x08 +#define INDEX_STORE_TAG_D 0x09 #if defined(CONFIG_CPU_LOONGSON2) -#define Hit_Invalidate_I 0x00 +#define HIT_INVALIDATE_I 0x00 #else -#define Hit_Invalidate_I 0x10 +#define HIT_INVALIDATE_I 0x10 #endif -#define Hit_Invalidate_D 0x11 -#define Hit_Writeback_Inv_D 0x15 +#define HIT_INVALIDATE_D 0x11 +#define HIT_WRITEBACK_INV_D 0x15 /* * R4000-specific cacheops */ -#define Create_Dirty_Excl_D 0x0d -#define Fill 0x14 -#define Hit_Writeback_I 0x18 -#define Hit_Writeback_D 0x19 +#define CREATE_DIRTY_EXCL_D 0x0d +#define FILL 0x14 +#define HIT_WRITEBACK_I 0x18 +#define HIT_WRITEBACK_D 0x19 /* * R4000SC and R4400SC-specific cacheops */ -#define Index_Invalidate_SI 0x02 -#define Index_Writeback_Inv_SD 0x03 -#define Index_Load_Tag_SI 0x06 -#define Index_Load_Tag_SD 0x07 -#define Index_Store_Tag_SI 0x0A -#define Index_Store_Tag_SD 0x0B -#define Create_Dirty_Excl_SD 0x0f -#define Hit_Invalidate_SI 0x12 -#define Hit_Invalidate_SD 0x13 -#define Hit_Writeback_Inv_SD 0x17 -#define Hit_Writeback_SD 0x1b -#define Hit_Set_Virtual_SI 0x1e -#define Hit_Set_Virtual_SD 0x1f +#define INDEX_INVALIDATE_SI 0x02 +#define INDEX_WRITEBACK_INV_SD 0x03 +#define INDEX_LOAD_TAG_SI 0x06 +#define INDEX_LOAD_TAG_SD 0x07 +#define INDEX_STORE_TAG_SI 0x0A +#define INDEX_STORE_TAG_SD 0x0B +#define CREATE_DIRTY_EXCL_SD 0x0f +#define HIT_INVALIDATE_SI 0x12 +#define HIT_INVALIDATE_SD 0x13 +#define HIT_WRITEBACK_INV_SD 0x17 +#define HIT_WRITEBACK_SD 0x1b +#define HIT_SET_VIRTUAL_SI 0x1e +#define HIT_SET_VIRTUAL_SD 0x1f /* * R5000-specific cacheops */ -#define R5K_Page_Invalidate_S 0x17 +#define R5K_PAGE_INVALIDATE_S 0x17 /* * RM7000-specific cacheops */ -#define Page_Invalidate_T 0x16 +#define PAGE_INVALIDATE_T 0x16 /* * R10000-specific cacheops @@ -69,17 +69,17 @@ * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused. * Most of the _S cacheops are identical to the R4000SC _SD cacheops. */ -#define Index_Writeback_Inv_S 0x03 -#define Index_Load_Tag_S 0x07 -#define Index_Store_Tag_S 0x0B -#define Hit_Invalidate_S 0x13 -#define Cache_Barrier 0x14 -#define Hit_Writeback_Inv_S 0x17 -#define Index_Load_Data_I 0x18 -#define Index_Load_Data_D 0x19 -#define Index_Load_Data_S 0x1b -#define Index_Store_Data_I 0x1c -#define Index_Store_Data_D 0x1d -#define Index_Store_Data_S 0x1f +#define INDEX_WRITEBACK_INV_S 0x03 +#define INDEX_LOAD_TAG_S 0x07 +#define INDEX_STORE_TAG_S 0x0B +#define HIT_INVALIDATE_S 0x13 +#define CACHE_BARRIER 0x14 +#define HIT_WRITEBACK_INV_S 0x17 +#define INDEX_LOAD_DATA_I 0x18 +#define INDEX_LOAD_DATA_D 0x19 +#define INDEX_LOAD_DATA_S 0x1b +#define INDEX_STORE_DATA_I 0x1c +#define INDEX_STORE_DATA_D 0x1d +#define INDEX_STORE_DATA_S 0x1f #endif /* __ASM_CACHEOPS_H */ diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h index 6e2cdc72cf..a735a8a2c7 100644 --- a/arch/mips/include/asm/global_data.h +++ b/arch/mips/include/asm/global_data.h @@ -48,7 +48,7 @@ typedef struct global_data { unsigned long tbl; unsigned long lastinc; #endif - unsigned long baudrate; + unsigned int baudrate; unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER unsigned long precon_buf_idx; /* Pre-Console buffer index */ diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index 025012ae60..80eab75e15 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -120,12 +120,20 @@ static inline void set_io_port_base(unsigned long base) */ extern inline phys_addr_t virt_to_phys(volatile void * address) { +#ifndef CONFIG_64BIT return CPHYSADDR(address); +#else + return XPHYSADDR(address); +#endif } extern inline void * phys_to_virt(unsigned long address) { +#ifndef CONFIG_64BIT return (void *)KSEG0ADDR(address); +#else + return (void *)CKSEG0ADDR(address); +#endif } /* @@ -133,12 +141,20 @@ extern inline void * phys_to_virt(unsigned long address) */ extern inline unsigned long virt_to_bus(volatile void * address) { +#ifndef CONFIG_64BIT return CPHYSADDR(address); +#else + return XPHYSADDR(address); +#endif } extern inline void * bus_to_virt(unsigned long address) { +#ifndef CONFIG_64BIT return (void *)KSEG0ADDR(address); +#else + return (void *)CKSEG0ADDR(address); +#endif } /* diff --git a/arch/mips/include/asm/posix_types.h b/arch/mips/include/asm/posix_types.h index 879aae210b..4deac5207a 100644 --- a/arch/mips/include/asm/posix_types.h +++ b/arch/mips/include/asm/posix_types.h @@ -24,9 +24,15 @@ typedef int __kernel_pid_t; typedef int __kernel_ipc_pid_t; typedef int __kernel_uid_t; typedef int __kernel_gid_t; +#if _MIPS_SZLONG != 64 typedef unsigned int __kernel_size_t; typedef int __kernel_ssize_t; typedef int __kernel_ptrdiff_t; +#else +typedef unsigned long __kernel_size_t; +typedef long __kernel_ssize_t; +typedef long __kernel_ptrdiff_t; +#endif typedef long __kernel_time_t; typedef long __kernel_suseconds_t; typedef long __kernel_clock_t; diff --git a/arch/mips/include/asm/u-boot.h b/arch/mips/include/asm/u-boot.h index 590649aa3e..5fa4a6a730 100644 --- a/arch/mips/include/asm/u-boot.h +++ b/arch/mips/include/asm/u-boot.h @@ -32,7 +32,7 @@ #define _U_BOOT_H_ 1 typedef struct bd_info { - int bi_baudrate; /* serial console baudrate */ + unsigned int bi_baudrate; /* serial console baudrate */ unsigned long bi_arch_number; /* unique id for this board */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c index b14b33efcd..7ddd77832c 100644 --- a/arch/mips/lib/board.c +++ b/arch/mips/lib/board.c @@ -266,8 +266,8 @@ void board_init_r(gd_t *id, ulong dest_addr) /* * We have to relocate the command table manually */ - fixup_cmdtable(&__u_boot_cmd_start, - (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); + fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd), + ll_entry_count(cmd_tbl_t, cmd)); #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ /* there are some other pointer constants we must deal with */ diff --git a/arch/nds32/cpu/n1213/u-boot.lds b/arch/nds32/cpu/n1213/u-boot.lds index 190342062a..cef19c51ee 100644 --- a/arch/nds32/cpu/n1213/u-boot.lds +++ b/arch/nds32/cpu/n1213/u-boot.lds @@ -52,9 +52,11 @@ SECTIONS } . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = ALIGN(4); diff --git a/arch/nds32/include/asm/global_data.h b/arch/nds32/include/asm/global_data.h index 94bd4c2722..b1feb2c0d0 100644 --- a/arch/nds32/include/asm/global_data.h +++ b/arch/nds32/include/asm/global_data.h @@ -44,7 +44,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long have_console; /* serial_init() was called */ unsigned long reloc_off; /* Relocation Offset */ diff --git a/arch/nds32/include/asm/u-boot.h b/arch/nds32/include/asm/u-boot.h index b533fea7c5..7b8d8e48fb 100644 --- a/arch/nds32/include/asm/u-boot.h +++ b/arch/nds32/include/asm/u-boot.h @@ -39,7 +39,7 @@ #include <environment.h> typedef struct bd_info { - int bi_baudrate; /* serial console baudrate */ + unsigned int bi_baudrate; /* serial console baudrate */ unsigned long bi_arch_number; /* unique id for this board */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c index 89900fea43..91395cabf3 100644 --- a/arch/nds32/lib/board.c +++ b/arch/nds32/lib/board.c @@ -320,8 +320,8 @@ void board_init_r(gd_t *id, ulong dest_addr) /* * We have to relocate the command table manually */ - fixup_cmdtable(&__u_boot_cmd_start, - (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); + fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd), + ll_entry_count(cmd_tbl_t, cmd)); #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ serial_initialize(); @@ -396,7 +396,7 @@ void board_init_r(gd_t *id, ulong dest_addr) /* Initialize from environment */ load_addr = getenv_ulong("loadaddr", 16, load_addr); -#ifdef BOARD_LATE_INIT +#ifdef CONFIG_BOARD_LATE_INIT board_late_init(); #endif diff --git a/arch/nios2/cpu/u-boot.lds b/arch/nios2/cpu/u-boot.lds index 4856bd368d..d0eb80de0e 100644 --- a/arch/nios2/cpu/u-boot.lds +++ b/arch/nios2/cpu/u-boot.lds @@ -45,13 +45,11 @@ SECTIONS * the initialization code relocates the command table as * well -- admittedly, this is just pure laziness ;-) */ - __u_boot_cmd_start = .; - .u_boot_cmd : - { - *(.u_boot_cmd) - } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } /* INIT DATA sections - "Small" data (see the gcc -G option) * is always gp-relative. Here we make all init data sections diff --git a/arch/nios2/include/asm/global_data.h b/arch/nios2/include/asm/global_data.h index 3b0d9e6294..413b485b61 100644 --- a/arch/nios2/include/asm/global_data.h +++ b/arch/nios2/include/asm/global_data.h @@ -26,7 +26,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER diff --git a/arch/nios2/include/asm/u-boot.h b/arch/nios2/include/asm/u-boot.h index 315ef8bedb..e591237634 100644 --- a/arch/nios2/include/asm/u-boot.h +++ b/arch/nios2/include/asm/u-boot.h @@ -39,7 +39,7 @@ typedef struct bd_info { unsigned long bi_flashoffset; /* reserved area for startup monitor */ unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ - unsigned long bi_baudrate; /* Console Baudrate */ + unsigned int bi_baudrate; /* Console Baudrate */ } bd_t; /* For image.h:image_check_target_arch() */ diff --git a/arch/openrisc/include/asm/global_data.h b/arch/openrisc/include/asm/global_data.h index 6a0c0cc547..96f3f1cdbb 100644 --- a/arch/openrisc/include/asm/global_data.h +++ b/arch/openrisc/include/asm/global_data.h @@ -35,7 +35,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long have_console; /* serial_init() was called */ phys_size_t ram_size; /* RAM size */ diff --git a/arch/openrisc/include/asm/u-boot.h b/arch/openrisc/include/asm/u-boot.h index 76b813273f..f2f31d3bb4 100644 --- a/arch/openrisc/include/asm/u-boot.h +++ b/arch/openrisc/include/asm/u-boot.h @@ -32,7 +32,7 @@ #define _U_BOOT_H_ typedef struct bd_info { - unsigned long bi_baudrate; /* serial console baudrate */ + unsigned int bi_baudrate; /* serial console baudrate */ unsigned long bi_arch_number; /* unique id for this board */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ diff --git a/arch/powerpc/cpu/74xx_7xx/traps.c b/arch/powerpc/cpu/74xx_7xx/traps.c index 7ae81eb7f3..a33e28368e 100644 --- a/arch/powerpc/cpu/74xx_7xx/traps.c +++ b/arch/powerpc/cpu/74xx_7xx/traps.c @@ -48,8 +48,7 @@ extern unsigned long search_exception_table(unsigned long); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -69,8 +68,7 @@ print_backtrace(unsigned long *sp) printf("\n"); } -void -show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -100,16 +98,14 @@ show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Exception in kernel pc %lx signal %d",regs->nip,signr); } -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; @@ -152,8 +148,7 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -164,8 +159,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL; int i, j; @@ -190,8 +184,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -SoftEmuException(struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -202,9 +195,7 @@ SoftEmuException(struct pt_regs *regs) panic("Software Emulation Exception"); } - -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -218,8 +209,7 @@ UnknownException(struct pt_regs *regs) /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { #if 0 int retval; diff --git a/arch/powerpc/cpu/74xx_7xx/u-boot.lds b/arch/powerpc/cpu/74xx_7xx/u-boot.lds index 24823cd20f..ecee439579 100644 --- a/arch/powerpc/cpu/74xx_7xx/u-boot.lds +++ b/arch/powerpc/cpu/74xx_7xx/u-boot.lds @@ -62,9 +62,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/arch/powerpc/cpu/mpc512x/traps.c b/arch/powerpc/cpu/mpc512x/traps.c index 786f4a5a7e..15468e5824 100644 --- a/arch/powerpc/cpu/mpc512x/traps.c +++ b/arch/powerpc/cpu/mpc512x/traps.c @@ -47,68 +47,65 @@ extern ulong get_effective_memsize(void); * Trap & Exception support */ -void -print_backtrace (unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; - puts ("Call backtrace: "); + puts("Call backtrace: "); while (sp) { if ((uint)sp > END_OF_MEM) break; i = sp[1]; if (cnt++ % 7 == 0) - putc ('\n'); - printf ("%08lX ", i); + putc('\n'); + printf("%08lX ", i); if (cnt > 32) break; sp = (unsigned long *) *sp; } - putc ('\n'); + putc('\n'); } -void show_regs (struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; - printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", + printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); - printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", + printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", regs->msr, regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0, regs->msr & MSR_FP ? 1 : 0,regs->msr & MSR_ME ? 1 : 0, regs->msr & MSR_IR ? 1 : 0, regs->msr & MSR_DR ? 1 : 0); - putc ('\n'); + putc('\n'); for (i = 0; i < 32; i++) { if ((i % 8) == 0) { - printf ("GPR%02d: ", i); + printf("GPR%02d: ", i); } - printf ("%08lX ", regs->gpr[i]); + printf("%08lX ", regs->gpr[i]); if ((i % 8) == 7) { - putc ('\n'); + putc('\n'); } } } -void -_exception (int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { - show_regs (regs); - print_backtrace ((unsigned long *)regs->gpr[1]); - panic ("Exception at pc %lx signal %d", regs->nip,signr); + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Exception at pc %lx signal %d", regs->nip, signr); } -void -MachineCheckException (struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { - unsigned long fixup; + unsigned long fixup = search_exception_table(regs->nip); - if ((fixup = search_exception_table (regs->nip)) != 0) { + if (fixup) { regs->nip = fixup; return; } @@ -118,95 +115,90 @@ MachineCheckException (struct pt_regs *regs) return; #endif - puts ("Machine check.\nCaused by (from msr): "); - printf ("regs %p ",regs); + puts("Machine check.\nCaused by (from msr): "); + printf("regs %p ", regs); switch (regs->msr & 0x00FF0000) { case (0x80000000 >> 10): - puts ("Instruction cache parity signal\n"); + puts("Instruction cache parity signal\n"); break; case (0x80000000 >> 11): - puts ("Data cache parity signal\n"); + puts("Data cache parity signal\n"); break; case (0x80000000 >> 12): - puts ("Machine check signal\n"); + puts("Machine check signal\n"); break; case (0x80000000 >> 13): - puts ("Transfer error ack signal\n"); + puts("Transfer error ack signal\n"); break; case (0x80000000 >> 14): - puts ("Data parity signal\n"); + puts("Data parity signal\n"); break; case (0x80000000 >> 15): - puts ("Address parity signal\n"); + puts("Address parity signal\n"); break; default: - puts ("Unknown values in msr\n"); + puts("Unknown values in msr\n"); } - show_regs (regs); - print_backtrace ((unsigned long *)regs->gpr[1]); + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); - panic ("machine check"); + panic("machine check"); } -void -AlignmentException (struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #ifdef CONFIG_CMD_KGDB if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - show_regs (regs); - print_backtrace ((unsigned long *)regs->gpr[1]); - panic ("Alignment Exception"); + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Alignment Exception"); } -void -ProgramCheckException (struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { #ifdef CONFIG_CMD_KGDB if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - show_regs (regs); - print_backtrace ((unsigned long *)regs->gpr[1]); - panic ("Program Check Exception"); + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Program Check Exception"); } -void -SoftEmuException (struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #ifdef CONFIG_CMD_KGDB if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - show_regs (regs); - print_backtrace ((unsigned long *)regs->gpr[1]); - panic ("Software Emulation Exception"); + show_regs(regs); + print_backtrace((unsigned long *)regs->gpr[1]); + panic("Software Emulation Exception"); } -void -UnknownException (struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #ifdef CONFIG_CMD_KGDB if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", + printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", regs->nip, regs->msr, regs->trap); - _exception (0, regs); + _exception(0, regs); } #ifdef CONFIG_CMD_BEDBUG -extern void do_bedbug_breakpoint (struct pt_regs *); +extern void do_bedbug_breakpoint(struct pt_regs *); #endif -void -DebugException (struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { - printf ("Debugger trap at @ %lx\n", regs->nip ); - show_regs (regs); + printf("Debugger trap at @ %lx\n", regs->nip); + show_regs(regs); #ifdef CONFIG_CMD_BEDBUG - do_bedbug_breakpoint (regs); + do_bedbug_breakpoint(regs); #endif } diff --git a/arch/powerpc/cpu/mpc512x/u-boot.lds b/arch/powerpc/cpu/mpc512x/u-boot.lds index 7a4d9270df..7faefba555 100644 --- a/arch/powerpc/cpu/mpc512x/u-boot.lds +++ b/arch/powerpc/cpu/mpc512x/u-boot.lds @@ -57,9 +57,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/arch/powerpc/cpu/mpc5xx/serial.c b/arch/powerpc/cpu/mpc5xx/serial.c index 6ef8be8fac..732856a5c5 100644 --- a/arch/powerpc/cpu/mpc5xx/serial.c +++ b/arch/powerpc/cpu/mpc5xx/serial.c @@ -161,21 +161,13 @@ static void mpc5xx_serial_setbrg(void) #endif } -static void mpc5xx_serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s); - ++s; - } -} - static struct serial_device mpc5xx_serial_drv = { .name = "mpc5xx_serial", .start = mpc5xx_serial_init, .stop = NULL, .setbrg = mpc5xx_serial_setbrg, .putc = mpc5xx_serial_putc, - .puts = mpc5xx_serial_puts, + .puts = default_serial_puts, .getc = mpc5xx_serial_getc, .tstc = mpc5xx_serial_tstc, }; diff --git a/arch/powerpc/cpu/mpc5xx/traps.c b/arch/powerpc/cpu/mpc5xx/traps.c index e3ce11b2b3..90da73bc73 100644 --- a/arch/powerpc/cpu/mpc5xx/traps.c +++ b/arch/powerpc/cpu/mpc5xx/traps.c @@ -52,7 +52,7 @@ extern unsigned long search_exception_table(unsigned long); /* * Print stack backtrace */ -void print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -75,7 +75,7 @@ void print_backtrace(unsigned long *sp) /* * Print current registers */ -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", @@ -105,7 +105,7 @@ void show_regs(struct pt_regs * regs) /* * General exception handler routine */ -void _exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); diff --git a/arch/powerpc/cpu/mpc5xx/u-boot.lds b/arch/powerpc/cpu/mpc5xx/u-boot.lds index e02b213d28..c91e146d26 100644 --- a/arch/powerpc/cpu/mpc5xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc5xx/u-boot.lds @@ -65,9 +65,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/arch/powerpc/cpu/mpc5xxx/traps.c b/arch/powerpc/cpu/mpc5xxx/traps.c index 5972f34579..438f8d3203 100644 --- a/arch/powerpc/cpu/mpc5xxx/traps.c +++ b/arch/powerpc/cpu/mpc5xxx/traps.c @@ -49,8 +49,7 @@ extern unsigned long search_exception_table(unsigned long); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -70,7 +69,7 @@ print_backtrace(unsigned long *sp) printf("\n"); } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -98,16 +97,14 @@ void show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Exception in kernel pc %lx signal %d",regs->nip,signr); } -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; @@ -152,8 +149,7 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -164,8 +160,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -176,8 +171,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -SoftEmuException(struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -189,8 +183,7 @@ SoftEmuException(struct pt_regs *regs) } -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -205,8 +198,7 @@ UnknownException(struct pt_regs *regs) extern void do_bedbug_breakpoint(struct pt_regs *); #endif -void -DebugException(struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { printf("Debugger trap at @ %lx\n", regs->nip ); @@ -219,8 +211,7 @@ DebugException(struct pt_regs *regs) /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { #if 0 int retval; diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds b/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds index 0c6c54e10a..ac7844dcf4 100644 --- a/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds +++ b/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds @@ -66,10 +66,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot.lds b/arch/powerpc/cpu/mpc5xxx/u-boot.lds index 5dcaec1820..1f46eadb5d 100644 --- a/arch/powerpc/cpu/mpc5xxx/u-boot.lds +++ b/arch/powerpc/cpu/mpc5xxx/u-boot.lds @@ -60,9 +60,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/arch/powerpc/cpu/mpc8220/traps.c b/arch/powerpc/cpu/mpc8220/traps.c index 13894c9050..19d6cb57cf 100644 --- a/arch/powerpc/cpu/mpc8220/traps.c +++ b/arch/powerpc/cpu/mpc8220/traps.c @@ -39,7 +39,7 @@ #include <asm/processor.h> /* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table (unsigned long); +extern unsigned long search_exception_table(unsigned long); /* THIS NEEDS CHANGING to use the board info structure. */ @@ -49,171 +49,166 @@ extern unsigned long search_exception_table (unsigned long); * Trap & Exception support */ -void print_backtrace (unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; - printf ("Call backtrace: "); + printf("Call backtrace: "); while (sp) { if ((uint) sp > END_OF_MEM) break; i = sp[1]; if (cnt++ % 7 == 0) - printf ("\n"); - printf ("%08lX ", i); + printf("\n"); + printf("%08lX ", i); if (cnt > 32) break; sp = (unsigned long *) *sp; } - printf ("\n"); + printf("\n"); } -void show_regs (struct pt_regs *regs) +void show_regs(struct pt_regs *regs) { int i; - printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", + printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); - printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", + printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", regs->msr, regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0, regs->msr & MSR_FP ? 1 : 0, regs->msr & MSR_ME ? 1 : 0, regs->msr & MSR_IR ? 1 : 0, regs->msr & MSR_DR ? 1 : 0); - printf ("\n"); + printf("\n"); for (i = 0; i < 32; i++) { if ((i % 8) == 0) { - printf ("GPR%02d: ", i); + printf("GPR%02d: ", i); } - printf ("%08lX ", regs->gpr[i]); + printf("%08lX ", regs->gpr[i]); if ((i % 8) == 7) { - printf ("\n"); + printf("\n"); } } } -void _exception (int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { - show_regs (regs); - print_backtrace ((unsigned long *) regs->gpr[1]); - panic ("Exception in kernel pc %lx signal %d", regs->nip, signr); + show_regs(regs); + print_backtrace((unsigned long *) regs->gpr[1]); + panic("Exception in kernel pc %lx signal %d", regs->nip, signr); } -void MachineCheckException (struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { - unsigned long fixup; + unsigned long fixup = search_exception_table(regs->nip); /* Probing PCI using config cycles cause this exception * when a device is not present. Catch it and return to * the PCI exception handler. */ - if ((fixup = search_exception_table (regs->nip)) != 0) { + if (fixup) { regs->nip = fixup; return; } #if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler - && (*debugger_exception_handler) (regs)) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - printf ("Machine check in kernel mode.\n"); - printf ("Caused by (from msr): "); - printf ("regs %p ", regs); + printf("Machine check in kernel mode.\n"); + printf("Caused by (from msr): "); + printf("regs %p ", regs); /* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */ switch (regs->msr & 0x000F0000) { case (0x80000000 >> 12): - printf ("Machine check signal - probably due to mm fault\n" + printf("Machine check signal - probably due to mm fault\n" "with mmu off\n"); break; case (0x80000000 >> 13): - printf ("Transfer error ack signal\n"); + printf("Transfer error ack signal\n"); break; case (0x80000000 >> 14): - printf ("Data parity signal\n"); + printf("Data parity signal\n"); break; case (0x80000000 >> 15): - printf ("Address parity signal\n"); + printf("Address parity signal\n"); break; default: - printf ("Unknown values in msr\n"); + printf("Unknown values in msr\n"); } - show_regs (regs); - print_backtrace ((unsigned long *) regs->gpr[1]); - panic ("machine check"); + show_regs(regs); + print_backtrace((unsigned long *) regs->gpr[1]); + panic("machine check"); } -void AlignmentException (struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler - && (*debugger_exception_handler) (regs)) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - show_regs (regs); - print_backtrace ((unsigned long *) regs->gpr[1]); - panic ("Alignment Exception"); + show_regs(regs); + print_backtrace((unsigned long *) regs->gpr[1]); + panic("Alignment Exception"); } -void ProgramCheckException (struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler - && (*debugger_exception_handler) (regs)) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - show_regs (regs); - print_backtrace ((unsigned long *) regs->gpr[1]); - panic ("Program Check Exception"); + show_regs(regs); + print_backtrace((unsigned long *) regs->gpr[1]); + panic("Program Check Exception"); } -void SoftEmuException (struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler - && (*debugger_exception_handler) (regs)) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - show_regs (regs); - print_backtrace ((unsigned long *) regs->gpr[1]); - panic ("Software Emulation Exception"); + show_regs(regs); + print_backtrace((unsigned long *) regs->gpr[1]); + panic("Software Emulation Exception"); } -void UnknownException (struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler - && (*debugger_exception_handler) (regs)) + if (debugger_exception_handler && (*debugger_exception_handler)(regs)) return; #endif - printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", + printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", regs->nip, regs->msr, regs->trap); - _exception (0, regs); + _exception(0, regs); } #if defined(CONFIG_CMD_BEDBUG) -extern void do_bedbug_breakpoint (struct pt_regs *); +extern void do_bedbug_breakpoint(struct pt_regs *); #endif -void DebugException (struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { - printf ("Debugger trap at @ %lx\n", regs->nip); - show_regs (regs); + printf("Debugger trap at @ %lx\n", regs->nip); + show_regs(regs); #if defined(CONFIG_CMD_BEDBUG) - do_bedbug_breakpoint (regs); + do_bedbug_breakpoint(regs); #endif } /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int addr_probe (uint * addr) +int addr_probe(uint *addr) { #if 0 int retval; diff --git a/arch/powerpc/cpu/mpc8220/u-boot.lds b/arch/powerpc/cpu/mpc8220/u-boot.lds index 39bb42e1c9..c1479544f9 100644 --- a/arch/powerpc/cpu/mpc8220/u-boot.lds +++ b/arch/powerpc/cpu/mpc8220/u-boot.lds @@ -59,9 +59,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/arch/powerpc/cpu/mpc8220/uart.c b/arch/powerpc/cpu/mpc8220/uart.c index 25d4472ea0..772528f82c 100644 --- a/arch/powerpc/cpu/mpc8220/uart.c +++ b/arch/powerpc/cpu/mpc8220/uart.c @@ -84,13 +84,6 @@ static void mpc8220_serial_putc(const char c) psc->xmitbuf[0] = c; } -static void mpc8220_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static int mpc8220_serial_getc(void) { volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; @@ -132,7 +125,7 @@ static struct serial_device mpc8220_serial_drv = { .stop = NULL, .setbrg = mpc8220_serial_setbrg, .putc = mpc8220_serial_putc, - .puts = mpc8220_serial_puts, + .puts = default_serial_puts, .getc = mpc8220_serial_getc, .tstc = mpc8220_serial_tstc, }; diff --git a/arch/powerpc/cpu/mpc824x/cpu_init.c b/arch/powerpc/cpu/mpc824x/cpu_init.c index 395f7767d1..cfc665d95c 100644 --- a/arch/powerpc/cpu/mpc824x/cpu_init.c +++ b/arch/powerpc/cpu/mpc824x/cpu_init.c @@ -63,7 +63,7 @@ void cpu_init_f (void) { /* MOUSSE board is initialized in asm */ -#if !defined(CONFIG_MOUSSE) && !defined(CONFIG_BMW) +#if !defined(CONFIG_MOUSSE) register unsigned long val; CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/ /* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/ @@ -321,7 +321,7 @@ cpu_init_f (void) CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */ __asm__ __volatile__("eieio"); -#endif /* !CONFIG_MOUSSE && !CONFIG_BMW */ +#endif /* !CONFIG_MOUSSE */ } diff --git a/arch/powerpc/cpu/mpc824x/start.S b/arch/powerpc/cpu/mpc824x/start.S index 70db73e156..076df70a9f 100644 --- a/arch/powerpc/cpu/mpc824x/start.S +++ b/arch/powerpc/cpu/mpc824x/start.S @@ -113,9 +113,6 @@ _start: in_flash: -#if defined(CONFIG_BMW) - bl early_init_f /* Must be ASM: no stack yet! */ -#endif /* * Setup BATs - cannot be done in C since we don't have a stack yet */ @@ -126,7 +123,7 @@ in_flash: mfmsr r3 ori r3, r3, (MSR_IR | MSR_DR) mtmsr r3 -#if !defined(CONFIG_BMW) + /* Enable and invalidate data cache. */ mfspr r3, HID0 @@ -158,7 +155,7 @@ in_flash: ori r3, r3, 0x0080 sync mtspr 1011, r3 -#endif /* !CONFIG_BMW */ + /* * Thisk the stack pointer *somewhere* sensible. Doesnt * matter much where as we'll move it when we relocate @@ -498,7 +495,6 @@ relocate_code: bdnz 3b 4: -#if !defined(CONFIG_BMW) /* Unlock the data cache and invalidate locked area */ xor r0, r0, r0 mtspr 1011, r0 @@ -510,7 +506,6 @@ relocate_code: dcbi r0, r4 addi r4, r4, 32 bdnz 41b -#endif /* * Now flush the cache: note that we must start from a cache aligned diff --git a/arch/powerpc/cpu/mpc824x/traps.c b/arch/powerpc/cpu/mpc824x/traps.c index 163b983340..9bcdd8f4ea 100644 --- a/arch/powerpc/cpu/mpc824x/traps.c +++ b/arch/powerpc/cpu/mpc824x/traps.c @@ -46,8 +46,7 @@ extern unsigned long search_exception_table(unsigned long); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -67,7 +66,7 @@ print_backtrace(unsigned long *sp) printf("\n"); } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -95,16 +94,14 @@ void show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Exception in kernel pc %lx signal %d",regs->nip,signr); } -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; @@ -142,24 +139,21 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Program Check Exception"); } -void -SoftEmuException(struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); @@ -167,8 +161,7 @@ SoftEmuException(struct pt_regs *regs) } -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", regs->nip, regs->msr, regs->trap); @@ -179,8 +172,7 @@ UnknownException(struct pt_regs *regs) extern void do_bedbug_breakpoint(struct pt_regs *); #endif -void -DebugException(struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { printf("Debugger trap at @ %lx\n", regs->nip ); @@ -193,8 +185,7 @@ DebugException(struct pt_regs *regs) /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { #if 0 int retval; diff --git a/arch/powerpc/cpu/mpc824x/u-boot.lds b/arch/powerpc/cpu/mpc824x/u-boot.lds index b30ce76e02..a7130125c7 100644 --- a/arch/powerpc/cpu/mpc824x/u-boot.lds +++ b/arch/powerpc/cpu/mpc824x/u-boot.lds @@ -60,9 +60,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/arch/powerpc/cpu/mpc8260/serial_scc.c b/arch/powerpc/cpu/mpc8260/serial_scc.c index ab7755824a..ab2a2b29cb 100644 --- a/arch/powerpc/cpu/mpc8260/serial_scc.c +++ b/arch/powerpc/cpu/mpc8260/serial_scc.c @@ -217,13 +217,6 @@ static void mpc8260_scc_serial_putc(const char c) tbdf->cbd_sc |= BD_SC_READY; } -static void mpc8260_scc_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static int mpc8260_scc_serial_getc(void) { volatile cbd_t *rbdf; @@ -267,7 +260,7 @@ static struct serial_device mpc8260_scc_serial_drv = { .stop = NULL, .setbrg = mpc8260_scc_serial_setbrg, .putc = mpc8260_scc_serial_putc, - .puts = mpc8260_scc_serial_puts, + .puts = default_serial_puts, .getc = mpc8260_scc_serial_getc, .tstc = mpc8260_scc_serial_tstc, }; diff --git a/arch/powerpc/cpu/mpc8260/serial_smc.c b/arch/powerpc/cpu/mpc8260/serial_smc.c index 7edde9a492..feba1f63d2 100644 --- a/arch/powerpc/cpu/mpc8260/serial_smc.c +++ b/arch/powerpc/cpu/mpc8260/serial_smc.c @@ -216,13 +216,6 @@ static void mpc8260_smc_serial_putc(const char c) rtx->txbd.cbd_sc |= BD_SC_READY; } -static void mpc8260_smc_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static int mpc8260_smc_serial_getc(void) { volatile smc_uart_t *up; @@ -270,7 +263,7 @@ static struct serial_device mpc8260_smc_serial_drv = { .stop = NULL, .setbrg = mpc8260_smc_serial_setbrg, .putc = mpc8260_smc_serial_putc, - .puts = mpc8260_smc_serial_puts, + .puts = default_serial_puts, .getc = mpc8260_smc_serial_getc, .tstc = mpc8260_smc_serial_tstc, }; diff --git a/arch/powerpc/cpu/mpc8260/traps.c b/arch/powerpc/cpu/mpc8260/traps.c index c116cdf69d..e1e68458e8 100644 --- a/arch/powerpc/cpu/mpc8260/traps.c +++ b/arch/powerpc/cpu/mpc8260/traps.c @@ -49,8 +49,7 @@ extern unsigned long search_exception_table(unsigned long); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -70,7 +69,7 @@ print_backtrace(unsigned long *sp) putc ('\n'); } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -96,8 +95,7 @@ void show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); @@ -122,8 +120,7 @@ void dump_pci (void) } #endif -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; @@ -180,8 +177,7 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -192,8 +188,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -204,8 +199,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -SoftEmuException(struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -217,8 +211,7 @@ SoftEmuException(struct pt_regs *regs) } -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -233,8 +226,7 @@ UnknownException(struct pt_regs *regs) extern void do_bedbug_breakpoint(struct pt_regs *); #endif -void -DebugException(struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { printf("Debugger trap at @ %lx\n", regs->nip ); @@ -247,8 +239,7 @@ DebugException(struct pt_regs *regs) /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { #if 0 int retval; diff --git a/arch/powerpc/cpu/mpc8260/u-boot.lds b/arch/powerpc/cpu/mpc8260/u-boot.lds index 60b71ecd70..42385fcc19 100644 --- a/arch/powerpc/cpu/mpc8260/u-boot.lds +++ b/arch/powerpc/cpu/mpc8260/u-boot.lds @@ -59,9 +59,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c index 663510987d..e64b0c3411 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu.c +++ b/arch/powerpc/cpu/mpc83xx/cpu.c @@ -56,6 +56,7 @@ int checkcpu(void) u32 partid; } cpu_type_list [] = { CPU_TYPE_ENTRY(8308), + CPU_TYPE_ENTRY(8309), CPU_TYPE_ENTRY(8311), CPU_TYPE_ENTRY(8313), CPU_TYPE_ENTRY(8314), diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index 76afba5dd2..20d06003e5 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -268,6 +268,9 @@ void cpu_init_f (volatile immap_t * im) #ifdef CONFIG_SYS_SICRL __raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl); #endif +#ifdef CONFIG_SYS_GPR1 + __raw_writel(CONFIG_SYS_GPR1, &im->sysconf.gpr1); +#endif #ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */ __raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr); #endif diff --git a/arch/powerpc/cpu/mpc83xx/fdt.c b/arch/powerpc/cpu/mpc83xx/fdt.c index 028c8f0d58..1f54781b7e 100644 --- a/arch/powerpc/cpu/mpc83xx/fdt.c +++ b/arch/powerpc/cpu/mpc83xx/fdt.c @@ -88,7 +88,8 @@ void ft_cpu_setup(void *blob, bd_t *bd) u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 }; path = fdt_path_offset(blob, prop); - prop = fdt_getprop(blob, path, "interrupts", 0); + prop = fdt_getprop(blob, path, "interrupts", + NULL); if (prop) fdt_setprop(blob, path, "interrupts", &tmp, sizeof(tmp)); @@ -100,7 +101,8 @@ void ft_cpu_setup(void *blob, bd_t *bd) u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 }; path = fdt_path_offset(blob, prop); - prop = fdt_getprop(blob, path, "interrupts", 0); + prop = fdt_getprop(blob, path, "interrupts", + NULL); if (prop) fdt_setprop(blob, path, "interrupts", &tmp, sizeof(tmp)); diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c index f78099d2fe..b8c05d1592 100644 --- a/arch/powerpc/cpu/mpc83xx/speed.c +++ b/arch/powerpc/cpu/mpc83xx/speed.c @@ -52,7 +52,7 @@ typedef struct { mult_t vco_divider; } corecnf_t; -corecnf_t corecnf_tab[] = { +static corecnf_t corecnf_tab[] = { {_byp, _byp}, /* 0x00 */ {_byp, _byp}, /* 0x01 */ {_byp, _byp}, /* 0x02 */ @@ -105,6 +105,8 @@ int get_clocks(void) u32 tsec1_clk; u32 tsec2_clk; u32 usbdr_clk; +#elif defined(CONFIG_MPC8309) + u32 usbdr_clk; #endif #ifdef CONFIG_MPC834x u32 usbmph_clk; @@ -120,14 +122,16 @@ int get_clocks(void) #if defined(CONFIG_FSL_ESDHC) u32 sdhc_clk; #endif +#if !defined(CONFIG_MPC8309) u32 enc_clk; +#endif u32 lbiu_clk; u32 lclk_clk; u32 mem_clk; #if defined(CONFIG_MPC8360) u32 mem_sec_clk; #endif -#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x) +#if defined(CONFIG_QE) u32 qepmf; u32 qepdf; u32 qe_clk; @@ -185,7 +189,10 @@ int get_clocks(void) /* unkown SCCR_TSEC1CM value */ return -2; } +#endif +#if defined(CONFIG_MPC830x) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) { case 0: usbdr_clk = 0; @@ -260,6 +267,7 @@ int get_clocks(void) return -6; } #endif +#if !defined(CONFIG_MPC8309) switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) { case 0: enc_clk = 0; @@ -277,6 +285,7 @@ int get_clocks(void) /* unkown SCCR_ENCCM value */ return -7; } +#endif #if defined(CONFIG_FSL_ESDHC) switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) { @@ -329,6 +338,8 @@ int get_clocks(void) i2c1_clk = sdhc_clk; #elif defined(CONFIG_MPC837x) i2c1_clk = enc_clk; +#elif defined(CONFIG_MPC8309) + i2c1_clk = csb_clk; #endif #if !defined(CONFIG_MPC832x) i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */ @@ -444,7 +455,7 @@ int get_clocks(void) return -13; } -#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x) +#if defined(CONFIG_QE) qepmf = (im->clk.spmr & SPMR_CEPMF) >> SPMR_CEPMF_SHIFT; qepdf = (im->clk.spmr & SPMR_CEPDF) >> SPMR_CEPDF_SHIFT; qe_clk = (pci_sync_in * qepmf) / (1 + qepdf); @@ -457,6 +468,8 @@ int get_clocks(void) gd->tsec1_clk = tsec1_clk; gd->tsec2_clk = tsec2_clk; gd->usbdr_clk = usbdr_clk; +#elif defined(CONFIG_MPC8309) + gd->usbdr_clk = usbdr_clk; #endif #if defined(CONFIG_MPC834x) gd->usbmph_clk = usbmph_clk; @@ -472,14 +485,16 @@ int get_clocks(void) #if !defined(CONFIG_MPC832x) gd->i2c2_clk = i2c2_clk; #endif +#if !defined(CONFIG_MPC8309) gd->enc_clk = enc_clk; +#endif gd->lbiu_clk = lbiu_clk; gd->lclk_clk = lclk_clk; gd->mem_clk = mem_clk; #if defined(CONFIG_MPC8360) gd->mem_sec_clk = mem_sec_clk; #endif -#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x) +#if defined(CONFIG_QE) gd->qe_clk = qe_clk; gd->brg_clk = brg_clk; #endif @@ -516,14 +531,14 @@ ulong get_ddr_freq(ulong dummy) return gd->mem_clk; } -int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char buf[32]; printf("Clock configuration:\n"); printf(" Core: %-4s MHz\n", strmhz(buf, gd->core_clk)); printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk)); -#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x) +#if defined(CONFIG_QE) printf(" QE: %-4s MHz\n", strmhz(buf, gd->qe_clk)); printf(" BRG: %-4s MHz\n", strmhz(buf, gd->brg_clk)); #endif @@ -533,7 +548,9 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_MPC8360) printf(" DDR Secondary: %-4s MHz\n", strmhz(buf, gd->mem_sec_clk)); #endif +#if !defined(CONFIG_MPC8309) printf(" SEC: %-4s MHz\n", strmhz(buf, gd->enc_clk)); +#endif printf(" I2C1: %-4s MHz\n", strmhz(buf, gd->i2c1_clk)); #if !defined(CONFIG_MPC832x) printf(" I2C2: %-4s MHz\n", strmhz(buf, gd->i2c2_clk)); @@ -549,6 +566,8 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) printf(" TSEC1: %-4s MHz\n", strmhz(buf, gd->tsec1_clk)); printf(" TSEC2: %-4s MHz\n", strmhz(buf, gd->tsec2_clk)); printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk)); +#elif defined(CONFIG_MPC8309) + printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk)); #endif #if defined(CONFIG_MPC834x) printf(" USB MPH: %-4s MHz\n", strmhz(buf, gd->usbmph_clk)); diff --git a/arch/powerpc/cpu/mpc83xx/traps.c b/arch/powerpc/cpu/mpc83xx/traps.c index 9d71b8b730..53a1062ea8 100644 --- a/arch/powerpc/cpu/mpc83xx/traps.c +++ b/arch/powerpc/cpu/mpc83xx/traps.c @@ -42,8 +42,7 @@ extern unsigned long search_exception_table(unsigned long); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -63,7 +62,7 @@ print_backtrace(unsigned long *sp) putc ('\n'); } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -89,8 +88,7 @@ void show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); @@ -114,8 +112,7 @@ void dump_pci (void) } #endif -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; @@ -174,8 +171,7 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -186,8 +182,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -198,8 +193,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -SoftEmuException(struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -211,8 +205,7 @@ SoftEmuException(struct pt_regs *regs) } -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -227,8 +220,7 @@ UnknownException(struct pt_regs *regs) extern void do_bedbug_breakpoint(struct pt_regs *); #endif -void -DebugException(struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { printf("Debugger trap at @ %lx\n", regs->nip ); show_regs(regs); @@ -240,8 +232,7 @@ DebugException(struct pt_regs *regs) /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { #if 0 int retval; diff --git a/arch/powerpc/cpu/mpc83xx/u-boot.lds b/arch/powerpc/cpu/mpc83xx/u-boot.lds index 2f4b9ad557..d699def9dd 100644 --- a/arch/powerpc/cpu/mpc83xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc83xx/u-boot.lds @@ -58,9 +58,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 33e93c88d7..78c412d9f3 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -66,6 +66,9 @@ COBJS-$(CONFIG_PPC_P2041) += ddr-gen3.o COBJS-$(CONFIG_PPC_P3041) += ddr-gen3.o COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o +COBJS-$(CONFIG_PPC_P5040) += ddr-gen3.o +COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o +COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o COBJS-$(CONFIG_BSC9131) += ddr-gen3.o COBJS-$(CONFIG_CPM2) += ether_fcc.o @@ -80,10 +83,14 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_ids.o COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o +COBJS-$(CONFIG_PPC_P5040) += p5040_ids.o +COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o +COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o COBJS-$(CONFIG_QE) += qe_io.o COBJS-$(CONFIG_CPM2) += serial_scc.o -COBJS-$(CONFIG_FSL_CORENET) += fsl_corenet_serdes.o +COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o +COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o # SoC specific SERDES support COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o @@ -110,6 +117,9 @@ COBJS-$(CONFIG_PPC_P2041) += p2041_serdes.o COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o +COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o +COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o +COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o COBJS = $(COBJS-y) COBJS += cpu.o diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c new file mode 100644 index 0000000000..7d33731a7b --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c @@ -0,0 +1,141 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 27, 1, 0), + SET_QP_INFO(2, 28, 1, 0), + SET_QP_INFO(3, 29, 1, 1), + SET_QP_INFO(4, 30, 1, 1), + SET_QP_INFO(5, 31, 1, 2), + SET_QP_INFO(6, 32, 1, 2), + SET_QP_INFO(7, 33, 1, 3), + SET_QP_INFO(8, 34, 1, 3), + SET_QP_INFO(9, 35, 1, 0), + SET_QP_INFO(10, 36, 1, 0), + SET_QP_INFO(11, 37, 1, 1), + SET_QP_INFO(12, 38, 1, 1), + SET_QP_INFO(13, 39, 1, 2), + SET_QP_INFO(14, 40, 1, 2), + SET_QP_INFO(15, 41, 1, 3), + SET_QP_INFO(16, 42, 1, 3), + SET_QP_INFO(17, 43, 1, 0), + SET_QP_INFO(18, 44, 1, 0), + SET_QP_INFO(19, 45, 1, 1), + SET_QP_INFO(20, 46, 1, 1), + SET_QP_INFO(21, 47, 1, 2), + SET_QP_INFO(22, 48, 1, 2), + SET_QP_INFO(23, 49, 1, 3), + SET_QP_INFO(24, 50, 1, 3), + SET_QP_INFO(25, 51, 1, 0), +}; +#endif + +struct srio_liodn_id_table srio_liodn_tbl[] = { + SET_SRIO_LIODN_1(1, 307), + SET_SRIO_LIODN_1(2, 387), +}; +int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(62), + SET_BMAN_LIODN(63), +#endif + + SET_SDHC_LIODN(1, 552), + + SET_USB_LIODN(1, "fsl-usb2-mph", 553), + + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148), + + SET_DMA_LIODN(1, 147), + SET_DMA_LIODN(2, 227), + + SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), + SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), + SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), + SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), + + /* SET_NEXUS_LIODN(557), -- not yet implemented */ +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 88), + SET_FMAN_RX_1G_LIODN(1, 1, 89), + SET_FMAN_RX_1G_LIODN(1, 2, 90), + SET_FMAN_RX_1G_LIODN(1, 3, 91), + SET_FMAN_RX_1G_LIODN(1, 4, 92), + SET_FMAN_RX_1G_LIODN(1, 5, 93), + SET_FMAN_RX_10G_LIODN(1, 0, 94), + SET_FMAN_RX_10G_LIODN(1, 1, 95), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 454, 458), + SET_SEC_JR_LIODN_ENTRY(1, 455, 459), + SET_SEC_JR_LIODN_ENTRY(2, 456, 460), + SET_SEC_JR_LIODN_ENTRY(3, 457, 461), + SET_SEC_RTIC_LIODN_ENTRY(a, 453), + SET_SEC_RTIC_LIODN_ENTRY(b, 549), + SET_SEC_RTIC_LIODN_ENTRY(c, 550), + SET_SEC_RTIC_LIODN_ENTRY(d, 551), + SET_SEC_DECO_LIODN_ENTRY(0, 541, 610), + SET_SEC_DECO_LIODN_ENTRY(1, 542, 611), + SET_SEC_DECO_LIODN_ENTRY(2, 543, 612), + SET_SEC_DECO_LIODN_ENTRY(3, 544, 613), + SET_SEC_DECO_LIODN_ENTRY(4, 545, 614), + SET_SEC_DECO_LIODN_ENTRY(5, 546, 615), + SET_SEC_DECO_LIODN_ENTRY(6, 547, 616), + SET_SEC_DECO_LIODN_ENTRY(7, 548, 617), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_RMAN +struct liodn_id_table rman_liodn_tbl[] = { + /* Set RMan block 0-3 liodn offset */ + SET_RMAN_LIODN(0, 678), + SET_RMAN_LIODN(1, 679), + SET_RMAN_LIODN(2, 680), + SET_RMAN_LIODN(3, 681), +}; +int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973), +#endif +#ifdef CONFIG_SYS_DPAA_RMAN + [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/b4860_serdes.c b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c new file mode 100644 index 0000000000..9990202f42 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c @@ -0,0 +1,162 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/processor.h> +#include <asm/io.h> +#include "fsl_corenet2_serdes.h" + +struct serdes_config { + u8 protocol; + u8 lanes[SRDS_MAX_LANES]; +}; + +static struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {0x0D, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x0E, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x12, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x2a, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + CPRI6, CPRI5, CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x30, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x32, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x33, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x34, {AURORA, AURORA, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {0x3E, {CPRI8, CPRI7, CPRI6, CPRI5, + CPRI4, CPRI3, CPRI2, CPRI1}}, + {} +}; +static struct serdes_config serdes2_cfg_tbl[] = { + /* SerDes 2 */ + {0x18, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + AURORA, AURORA, SRIO1, SRIO1}}, + {0x1D, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + AURORA, AURORA, SRIO1, SRIO1}}, + {0x2B, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, + AURORA, AURORA, SRIO1, SRIO1}}, + {0x30, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, + AURORA, AURORA, + SRIO1, SRIO1}}, + {0x49, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x4A, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x4C, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x4E, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, AURORA, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {0x84, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, AURORA, AURORA, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0x85, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, AURORA, AURORA, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0x87, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SRIO2, SRIO2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0x93, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {0x9E, {PCIE1, PCIE1, PCIE1, PCIE1, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {0x9A, {PCIE1, PCIE1, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {0xB2, {PCIE1, PCIE1, PCIE1, PCIE1, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XFI_FM1_MAC9, XFI_FM1_MAC10}}, + {0xC3, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC9, XAUI_FM1_MAC9, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {} +}; +static struct serdes_config *serdes_cfg_tbl[] = { + serdes1_cfg_tbl, + serdes2_cfg_tbl, +}; + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == cfg) + return ptr->lanes[lane]; + ptr++; + } + + return 0; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == prtcl) + break; + ptr++; + } + + if (!ptr->protocol) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (ptr->lanes[i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index e8989bdf45..2be192d578 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -76,11 +76,15 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC111) puts("Work-around for Erratum ESDHC111 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A004468 + puts("Work-around for Erratum A004468 enabled\n"); +#endif #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135) puts("Work-around for Erratum ESDHC135 enabled\n"); #endif -#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC136) - puts("Work-around for Erratum ESDHC136 enabled\n"); +#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC13) + if (SVR_MAJ(svr) < 3) + puts("Work-around for Erratum ESDHC13 enabled\n"); #endif #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001) puts("Work-around for Erratum ESDHC-A001 enabled\n"); @@ -127,6 +131,12 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_A004510 puts("Work-around for Erratum A004510 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + puts("Work-around for Erratum SRIO-A004034 enabled\n"); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 + puts("Work-around for Erratum A004934 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 5ddb29435c..db232e64f8 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -60,20 +60,32 @@ int checkcpu (void) uint major, minor; struct cpu_type *cpu; char buf1[32], buf2[32]; -#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET) +#if (defined(CONFIG_DDR_CLK_FREQ) || \ + defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #endif /* CONFIG_FSL_CORENET */ -#ifdef CONFIG_DDR_CLK_FREQ - u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) - >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; -#else + + /* + * Cornet platforms use ddr sync bit in RCW to indicate sync vs async + * mode. Previous platform use ddr ratio to do the same. This + * information is only for display here. + */ #ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + u32 ddr_sync = 0; /* only async mode is supported */ +#else u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC) >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT; +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ +#else /* CONFIG_FSL_CORENET */ +#ifdef CONFIG_DDR_CLK_FREQ + u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO) + >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT; #else u32 ddr_ratio = 0; -#endif /* CONFIG_FSL_CORENET */ #endif /* CONFIG_DDR_CLK_FREQ */ +#endif /* CONFIG_FSL_CORENET */ + unsigned int i, core, nr_cores = cpu_numcores(); u32 mask = cpu_mask(); @@ -127,6 +139,11 @@ int checkcpu (void) printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr); + if (nr_cores > CONFIG_MAX_CPUS) { + panic("\nUnexpected number of cores: %d, max is %d\n", + nr_cores, CONFIG_MAX_CPUS); + } + get_sys_info(&sysinfo); puts("Clock Configuration:"); @@ -181,6 +198,10 @@ int checkcpu (void) } #endif +#if defined(CONFIG_FSL_IFC) + printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus)); +#endif + #ifdef CONFIG_CPM2 printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus)); #endif @@ -196,6 +217,10 @@ int checkcpu (void) } #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freqQMAN)); +#endif + #ifdef CONFIG_SYS_DPAA_PME printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME)); #endif @@ -270,10 +295,7 @@ reset_85xx_watchdog(void) /* * Clear TSR(WIS) bit by writing 1 */ - unsigned long val; - val = mfspr(SPRN_TSR); - val |= TSR_WIS; - mtspr(SPRN_TSR, val); + mtspr(SPRN_TSR, TSR_WIS); } #endif /* CONFIG_WATCHDOG */ diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index afb56719da..f01804bbb9 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -182,7 +182,7 @@ static void enable_cpc(void) printf("Corenet Platform Cache: %d KB enabled\n", size); } -void invalidate_cpc(void) +static void invalidate_cpc(void) { int i; cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR; @@ -295,6 +295,43 @@ static void __fsl_serdes__init(void) } __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void); +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +int enable_cluster_l2(void) +{ + int i = 0; + u32 cluster; + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + struct ccsr_cluster_l2 __iomem *l2cache; + + cluster = in_be32(&gur->tp_cluster[i].lower); + if (cluster & TP_CLUSTER_EOC) + return 0; + + /* The first cache has already been set up, so skip it */ + i++; + + /* Look through the remaining clusters, and set up their caches */ + do { + l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000); + cluster = in_be32(&gur->tp_cluster[i].lower); + + /* set stash ID to (cluster) * 2 + 32 + 1 */ + clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1); + + printf("enable l2 for cluster %d %p\n", i, l2cache); + + out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC); + while ((in_be32(&l2cache->l2csr0) & + (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0) + ; + out_be32(&l2cache->l2csr0, L2CSR0_L2E); + i++; + } while (!(cluster & TP_CLUSTER_EOC)); + + return 0; +} +#endif + /* * Initialize L2 as cache. * @@ -306,7 +343,12 @@ int cpu_init_r(void) { __maybe_unused u32 svr = get_svr(); #ifdef CONFIG_SYS_LBC_LCRR - volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; + fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR; +#endif +#ifdef CONFIG_L2_CACHE + ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR; +#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) + struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2; #endif #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ @@ -356,7 +398,6 @@ int cpu_init_r(void) puts ("L2: "); #if defined(CONFIG_L2_CACHE) - volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; volatile uint cache_ctl; uint ver; u32 l2siz_field; @@ -467,6 +508,11 @@ int cpu_init_r(void) } skip_l2: +#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) + if (l2cache->l2csr0 & L2CSR0_L2E) + printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64); + + enable_cluster_l2(); #else puts("disabled\n"); #endif @@ -478,7 +524,7 @@ skip_l2: #ifdef CONFIG_SYS_SRIO srio_init(); -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER char *s = getenv("bootmaster"); if (s) { if (!strcmp(s, "SRIO1")) { @@ -497,11 +543,13 @@ skip_l2: setup_mp(); #endif -#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136 +#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13 { - void *p; - p = (void *)CONFIG_SYS_DCSRBAR + 0x20520; - setbits_be32(p, 1 << (31 - 14)); + if (SVR_MAJ(svr) < 3) { + void *p; + p = (void *)CONFIG_SYS_DCSRBAR + 0x20520; + setbits_be32(p, 1 << (31 - 14)); + } } #endif diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index ca4ed62645..f118dd5daf 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -18,12 +18,14 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num) { - unsigned int i; + unsigned int i, bus_width; volatile ccsr_ddr_t *ddr; u32 temp_sdram_cfg; + u32 total_gb_size_per_controller; + int timeout; #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 + int timeout_save; volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR; - u32 total_gb_size_per_controller; unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t; int csn = -1; #endif @@ -52,8 +54,8 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, return; } - out_be32(&ddr->eor, regs->ddr_eor); - + if (regs->ddr_eor) + out_be32(&ddr->eor, regs->ddr_eor); #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 debug("Workaround for ERRATUM_DDR111_DDR134\n"); for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { @@ -121,6 +123,11 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5); out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl); out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl); + if (regs->ddr_wrlvl_cntl_2) + out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2); + if (regs->ddr_wrlvl_cntl_3) + out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3); + out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr); out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1); out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2); @@ -134,6 +141,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->debug[i], regs->debug[i]); } } +#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 + out_be32(&ddr->debug[28], 0x00003000); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474 out_be32(&ddr->debug[12], 0x00000015); @@ -270,9 +280,48 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN); asm volatile("sync;isync"); + total_gb_size_per_controller = 0; + for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { + if (!(regs->cs[i].config & 0x80000000)) + continue; + total_gb_size_per_controller += 1 << ( + ((regs->cs[i].config >> 14) & 0x3) + 2 + + ((regs->cs[i].config >> 8) & 0x7) + 12 + + ((regs->cs[i].config >> 0) & 0x7) + 8 + + 3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) - + 26); /* minus 26 (count of 64M) */ + } + if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */ + total_gb_size_per_controller *= 3; + else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */ + total_gb_size_per_controller <<= 1; + /* + * total memory / bus width = transactions needed + * transactions needed / data rate = seconds + * to add plenty of buffer, double the time + * For example, 2GB on 666MT/s 64-bit bus takes about 402ms + * Let's wait for 800ms + */ + bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK) + >> SDRAM_CFG_DBW_SHIFT); + timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 / + (get_ddr_freq(0) >> 20)) << 1; +#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 + timeout_save = timeout; +#endif + total_gb_size_per_controller >>= 4; /* shift down to gb size */ + debug("total %d GB\n", total_gb_size_per_controller); + debug("Need to wait up to %d * 10ms\n", timeout); + /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */ - while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) + while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 /* continue this workaround */ @@ -330,23 +379,9 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, while (in_be32(&ddr->debug[1]) & 0x400) udelay(10000); /* throttle polling rate */ - /* 7. Wait for 400ms/GB */ - total_gb_size_per_controller = 0; - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - if (i == csn) { - total_gb_size_per_controller += - ((csn_bnds_backup & 0xFFFF) >> 6) - - (csn_bnds_backup >> 22) + 1; - } else { - total_gb_size_per_controller += - ((regs->cs[i].bnds & 0xFFFF) >> 6) - - (regs->cs[i].bnds >> 22) + 1; - } - } - if (in_be32(&ddr->sdram_cfg) & 0x80000) - total_gb_size_per_controller <<= 1; - debug("Wait for %d ms\n", total_gb_size_per_controller * 400); - udelay(total_gb_size_per_controller * 400000); + /* 7. Wait for state machine 2nd run, roughly 400ms/GB */ + debug("Wait for %d * 10ms\n", timeout_save); + udelay(timeout_save * 10000); /* 8. Set sdram_cfg_2[dinit] if options requires */ setbits_be32(&ddr->sdram_cfg_2, @@ -354,8 +389,16 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2)); /* 9. Poll until dinit is cleared */ - while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) - udelay(10000); + timeout = timeout_save; + debug("Need to wait up to %d * 10ms\n", timeout); + while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) && + (timeout >= 0)) { + udelay(10000); /* throttle polling rate */ + timeout--; + } + + if (timeout <= 0) + printf("Waiting for D_INIT timeout. Memory may not work.\n"); /* 10. Clear EEBACR[3] */ clrbits_be32(&ecm->eebacr, 10000000); diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index a0a9b4c5ae..ab0933076d 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -47,8 +47,8 @@ extern void ft_srio_setup(void *blob); void ft_fixup_cpu(void *blob, u64 memory_limit) { int off; - ulong spin_tbl_addr = get_spin_phys_addr(); - u32 bootpg = determine_mp_bootpg(); + phys_addr_t spin_tbl_addr = get_spin_phys_addr(); + u32 bootpg = determine_mp_bootpg(NULL); u32 id = get_my_id(); const char *enable_method; @@ -97,7 +97,16 @@ void ft_fixup_cpu(void *blob, u64 memory_limit) if ((u64)bootpg < memory_limit) { off = fdt_add_mem_rsv(blob, bootpg, (u64)4096); if (off < 0) - printf("%s: %s\n", __FUNCTION__, fdt_strerror(off)); + printf("Failed to reserve memory for bootpg: %s\n", + fdt_strerror(off)); + } + /* Reserve spin table page */ + if (spin_tbl_addr < memory_limit) { + off = fdt_add_mem_rsv(blob, + (spin_tbl_addr & ~0xffful), 4096); + if (off < 0) + printf("Failed to reserve memory for spin table: %s\n", + fdt_strerror(off)); } } #endif @@ -220,12 +229,19 @@ static inline void ft_fixup_l2cache(void *blob) /* we dont bother w/L3 since no platform of this type has one */ } -#elif defined(CONFIG_BACKSIDE_L2_CACHE) +#elif defined(CONFIG_BACKSIDE_L2_CACHE) || \ + defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) static inline void ft_fixup_l2cache(void *blob) { int off, l2_off, l3_off = -1; u32 *ph; +#ifdef CONFIG_BACKSIDE_L2_CACHE u32 l2cfg0 = mfspr(SPRN_L2CFG0); +#else + struct ccsr_cluster_l2 *l2cache = + (struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2); + u32 l2cfg0 = in_be32(&l2cache->l2cfg0); +#endif u32 size, line_size, num_ways, num_sets; int has_l2 = 1; @@ -257,7 +273,12 @@ static inline void ft_fixup_l2cache(void *blob) if (has_l2) { #ifdef CONFIG_SYS_CACHE_STASHING u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0); +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + /* Only initialize every eighth thread */ + if (reg && !((*reg) % 8)) +#else if (reg) +#endif fdt_setprop_cell(blob, l2_off, "cache-stash-id", (*reg * 2) + 32 + 1); #endif @@ -390,6 +411,11 @@ static void ft_fixup_dpaa_clks(void *blob) #endif #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + do_fixup_by_compat_u32(blob, "fsl,qman", + "clock-frequency", sysinfo.freqQMAN, 1); +#endif + #ifdef CONFIG_SYS_DPAA_PME do_fixup_by_compat_u32(blob, "fsl,pme", "clock-frequency", sysinfo.freqPME, 1); diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c new file mode 100644 index 0000000000..01dcdf6bc1 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -0,0 +1,203 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/immap_85xx.h> +#include <asm/io.h> +#include <asm/processor.h> +#include <asm/fsl_law.h> +#include <asm/errno.h> +#include "fsl_corenet2_serdes.h" + +static u64 serdes1_prtcl_map; +static u64 serdes2_prtcl_map; +#ifdef CONFIG_SYS_FSL_SRDS_3 +static u64 serdes3_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 +static u64 serdes4_prtcl_map; +#endif + +#ifdef DEBUG +static const char *serdes_prtcl_str[] = { + [NONE] = "NA", + [PCIE1] = "PCIE1", + [PCIE2] = "PCIE2", + [PCIE3] = "PCIE3", + [PCIE4] = "PCIE4", + [SATA1] = "SATA1", + [SATA2] = "SATA2", + [SRIO1] = "SRIO1", + [SRIO2] = "SRIO2", + [SGMII_FM1_DTSEC1] = "SGMII_FM1_DTSEC1", + [SGMII_FM1_DTSEC2] = "SGMII_FM1_DTSEC2", + [SGMII_FM1_DTSEC3] = "SGMII_FM1_DTSEC3", + [SGMII_FM1_DTSEC4] = "SGMII_FM1_DTSEC4", + [SGMII_FM1_DTSEC5] = "SGMII_FM1_DTSEC5", + [SGMII_FM1_DTSEC6] = "SGMII_FM1_DTSEC6", + [SGMII_FM2_DTSEC1] = "SGMII_FM2_DTSEC1", + [SGMII_FM2_DTSEC2] = "SGMII_FM2_DTSEC2", + [SGMII_FM2_DTSEC3] = "SGMII_FM2_DTSEC3", + [SGMII_FM2_DTSEC4] = "SGMII_FM2_DTSEC4", + [XAUI_FM1] = "XAUI_FM1", + [XAUI_FM2] = "XAUI_FM2", + [AURORA] = "DEBUG", + [CPRI1] = "CPRI1", + [CPRI2] = "CPRI2", + [CPRI3] = "CPRI3", + [CPRI4] = "CPRI4", + [CPRI5] = "CPRI5", + [CPRI6] = "CPRI6", + [CPRI7] = "CPRI7", + [CPRI8] = "CPRI8", + [XAUI_FM1_MAC9] = "XAUI_FM1_MAC9", + [XAUI_FM1_MAC10] = "XAUI_FM1_MAC10", + [XAUI_FM2_MAC9] = "XAUI_FM2_MAC9", + [XAUI_FM2_MAC10] = "XAUI_FM2_MAC10", + [HIGIG_FM1_MAC9] = "HiGig_FM1_MAC9", + [HIGIG_FM1_MAC10] = "HiGig_FM1_MAC10", + [HIGIG_FM2_MAC9] = "HiGig_FM2_MAC9", + [HIGIG_FM2_MAC10] = "HiGig_FM2_MAC10", + [QSGMII_FM1_A] = "QSGMII_FM1_A", + [QSGMII_FM1_B] = "QSGMII_FM1_B", + [QSGMII_FM2_A] = "QSGMII_FM2_A", + [QSGMII_FM2_B] = "QSGMII_FM2_B", + [XFI_FM1_MAC9] = "XFI_FM1_MAC9", + [XFI_FM1_MAC10] = "XFI_FM1_MAC10", + [XFI_FM2_MAC9] = "XFI_FM2_MAC9", + [XFI_FM2_MAC10] = "XFI_FM2_MAC10", + [INTERLAKEN] = "INTERLAKEN", +}; +#endif + +int is_serdes_configured(enum srds_prtcl device) +{ + u64 ret = 0; + + ret |= (1ULL << device) & serdes1_prtcl_map; + ret |= (1ULL << device) & serdes2_prtcl_map; +#ifdef CONFIG_SYS_FSL_SRDS_3 + ret |= (1ULL << device) & serdes3_prtcl_map; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 + ret |= (1ULL << device) & serdes4_prtcl_map; +#endif + + return !!ret; +} + +int serdes_get_first_lane(u32 sd, enum srds_prtcl device) +{ + const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 cfg = in_be32(&gur->rcwsr[4]); + int i; + + switch (sd) { + case FSL_SRDS_1: + cfg &= FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + break; + case FSL_SRDS_2: + cfg &= FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + break; +#ifdef CONFIG_SYS_FSL_SRDS_3 + case FSL_SRDS_3: + cfg &= FSL_CORENET2_RCWSR4_SRDS3_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT; + break; +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 + case FSL_SRDS_4: + cfg &= FSL_CORENET2_RCWSR4_SRDS4_PRTCL; + cfg >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT; + break; +#endif + default: + printf("invalid SerDes%d\n", sd); + break; + } + /* Is serdes enabled at all? */ + if (unlikely(cfg == 0)) + return -ENODEV; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_get_prtcl(sd, cfg, i) == device) + return i; + } + + return -ENODEV; +} + +u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u64 serdes_prtcl_map = 0; + u32 cfg; + int lane; + + cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask; + /* Is serdes enabled at all? */ + if (!cfg) { + printf("SERDES%d is not enabled\n", sd + 1); + return 0; + } + + cfg >>= sd_prctl_shift; + printf("Using SERDES%d Protocol: 0x%x\n", sd + 1, cfg); + if (!is_serdes_prtcl_valid(sd, cfg)) + printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg); + + for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane); + serdes_prtcl_map |= (1ULL << lane_prtcl); + } + + return serdes_prtcl_map; +} + +void fsl_serdes_init(void) +{ + + serdes1_prtcl_map = serdes_init(FSL_SRDS_1, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR, + FSL_CORENET2_RCWSR4_SRDS1_PRTCL, + FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT); + serdes2_prtcl_map = serdes_init(FSL_SRDS_2, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000, + FSL_CORENET2_RCWSR4_SRDS2_PRTCL, + FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT); +#ifdef CONFIG_SYS_FSL_SRDS_3 + serdes3_prtcl_map = serdes_init(FSL_SRDS_3, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000, + FSL_CORENET2_RCWSR4_SRDS3_PRTCL, + FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT); +#endif +#ifdef CONFIG_SYS_FSL_SRDS_4 + serdes4_prtcl_map = serdes_init(FSL_SRDS_4, + CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_4 * 0x1000, + FSL_CORENET2_RCWSR4_SRDS4_PRTCL, + FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT); +#endif + +} diff --git a/drivers/net/netarm_eth.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h index 8edab82da3..2258f41888 100644 --- a/drivers/net/netarm_eth.h +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2003 IMMS gGmbH <www.imms.de> + * Copyright 2012 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -15,28 +15,12 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA - * - * author(s): Thomas Elste, <info@elste.org> */ -#include <asm/types.h> -#include <config.h> - -#ifdef CONFIG_DRIVER_NETARMETH - -#define SET_EADDR(ad,val) *(volatile unsigned int*)(ad + NETARM_ETH_MODULE_BASE) = val -#define GET_EADDR(ad) (*(volatile unsigned int*)(ad + NETARM_ETH_MODULE_BASE)) - -#define NA_MII_POLL_BUSY_DELAY 900 - -/* MII negotiation timeout value - 500 jiffies = 5 seconds */ -#define NA_MII_NEGOTIATE_DELAY 30 - -/* Registers in the physical layer chip */ -#define MII_PHY_CONTROL 0 -#define MII_PHY_STATUS 1 -#define MII_PHY_ID 2 -#define MII_PHY_AUTONEGADV 4 +#ifndef __FSL_CORENET2_SERDES_H +#define __FSL_CORENET2_SERDES_H -#endif /* CONFIG_DRIVER_NETARMETH */ +int is_serdes_prtcl_valid(int serdes, u32 prtcl); +int serdes_lane_enabled(int lane); +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane); +#endif /* __FSL_CORENET2_SERDES_H */ diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 2a68060369..7f466ac6a9 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -92,10 +92,17 @@ static const struct { { 17, 163, FSL_SRDS_BANK_2 }, { 18, 164, FSL_SRDS_BANK_2 }, { 19, 165, FSL_SRDS_BANK_2 }, +#ifdef CONFIG_PPC_P4080 { 20, 170, FSL_SRDS_BANK_3 }, { 21, 171, FSL_SRDS_BANK_3 }, { 22, 172, FSL_SRDS_BANK_3 }, { 23, 173, FSL_SRDS_BANK_3 }, +#else + { 20, 166, FSL_SRDS_BANK_3 }, + { 21, 167, FSL_SRDS_BANK_3 }, + { 22, 168, FSL_SRDS_BANK_3 }, + { 23, 169, FSL_SRDS_BANK_3 }, +#endif }; int serdes_get_lane_idx(int lane) @@ -482,7 +489,7 @@ static void wait_for_rstdone(unsigned int bank) } -void __soc_serdes_init(void) +static void __soc_serdes_init(void) { /* Allow for SoC-specific initialization in <SOC>_serdes.c */ }; @@ -493,6 +500,9 @@ void fsl_serdes_init(void) ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); int cfg; serdes_corenet_t *srds_regs; +#ifdef CONFIG_PPC_P5040 + serdes_corenet_t *srds2_regs; +#endif int lane, bank, idx; int have_bank[SRDS_MAX_BANK] = {}; #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 @@ -574,6 +584,34 @@ void fsl_serdes_init(void) } } +#ifdef CONFIG_PPC_P5040 + /* + * Lanes on bank 4 on P5040 are commented-out, but for some SERDES + * protocols, these lanes are routed to SATA. We use serdes_prtcl_map + * to decide whether a protocol is supported on a given lane, so SATA + * will be identified as not supported, and therefore not initialized. + * So for protocols which use SATA on bank4, we add SATA support in + * serdes_prtcl_map. + */ + switch (cfg) { + case 0x0: + case 0x1: + case 0x2: + case 0x3: + case 0x4: + case 0x5: + case 0x6: + case 0x7: + serdes_prtcl_map |= 1 << SATA1 | 1 << SATA2; + break; + default: + srds2_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR; + + /* We don't need bank 4, so power it down */ + setbits_be32(&srds2_regs->bank[0].rstctl, SRDS_RSTCTL_SDPD); + } +#endif + soc_serdes_init(); #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 @@ -617,6 +655,38 @@ void fsl_serdes_init(void) } } +#ifdef CONFIG_SYS_FSL_ERRATUM_A004699 + /* + * To avoid the situation that resulted in the P4080 erratum + * SERDES-8, a given SerDes bank will use the PLLs from the previous + * bank if one of the PLL frequencies is a multiple of the other. For + * instance, if bank 3 is running at 2.5GHz and bank 2 is at 1.25GHz, + * then bank 3 will use bank 2's PLL. P5040 Erratum A-004699 says + * that, in this situation, lane synchronization is not initiated. So + * when we detect a bank with a "borrowed" PLL, we have to manually + * initiate lane synchronization. + */ + for (bank = FSL_SRDS_BANK_2; bank <= FSL_SRDS_BANK_3; bank++) { + /* Determine the first lane for this bank */ + unsigned int lane; + + for (lane = 0; lane < SRDS_MAX_LANES; lane++) + if (lanes[lane].bank == bank) + break; + idx = lanes[lane].idx; + + /* + * Check if the PLL for the bank is borrowed. The UOTHL + * bit of the first lane will tell us that. + */ + if (in_be32(&srds_regs->lane[idx].gcr0) & SRDS_GCR0_UOTHL) { + /* Manually start lane synchronization */ + setbits_be32(&srds_regs->bank[bank].pllcr0, + SRDS_PLLCR0_PVCOCNT_EN); + } + } +#endif + #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) || defined (CONFIG_SYS_P4080_ERRATUM_SERDES9) for (lane = 0; lane < SRDS_MAX_LANES; lane++) { enum srds_prtcl lane_prtcl; diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h index f261351c8a..3c551e9b4c 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h @@ -22,9 +22,6 @@ #ifndef __FSL_CORENET_SERDES_H #define __FSL_CORENET_SERDES_H -#define SRDS_MAX_LANES 18 -#define SRDS_MAX_BANK 3 - enum srds_bank { FSL_SRDS_BANK_1 = 0, FSL_SRDS_BANK_2 = 1, diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c index 11881c9489..2e533672f3 100644 --- a/arch/powerpc/cpu/mpc85xx/liodn.c +++ b/arch/powerpc/cpu/mpc85xx/liodn.c @@ -40,6 +40,7 @@ int get_dpaa_liodn(enum fsl_dpaa_dev dpaa_dev, u32 *liodns, int liodn_offset) return liodn_bases[dpaa_dev].num_ids; } +#ifdef CONFIG_SYS_SRIO static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size) { int i; @@ -54,6 +55,7 @@ static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size) } } } +#endif static void set_liodn(struct liodn_id_table *tbl, int size) { @@ -181,8 +183,10 @@ void set_liodns(void) /* setup general liodn offsets */ set_liodn(liodn_tbl, liodn_tbl_sz); +#ifdef CONFIG_SYS_SRIO /* setup SRIO port liodns */ set_srio_liodn(srio_liodn_tbl, srio_liodn_tbl_sz); +#endif /* setup SEC block liodn bases & offsets if we have one */ if (IS_E_PROCESSOR(get_svr())) { @@ -219,6 +223,7 @@ void set_liodns(void) #endif } +#ifdef CONFIG_SYS_SRIO static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl) { int i, srio_off; @@ -247,6 +252,57 @@ static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl) } } } +#endif + +#define CONFIG_SYS_MAX_PCI_EPS 8 +#define CONFIG_SYS_PCI_EP_LIODN_START 256 + +static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat) +{ + int off, pci_idx = 0, pci_cnt = 0, i, rc; + const uint32_t *base_liodn; + uint32_t liodn_offs[CONFIG_SYS_MAX_PCI_EPS + 1] = { 0 }; + + /* + * Count the number of pci nodes. + * It's needed later when the interleaved liodn offsets are generated. + */ + off = fdt_node_offset_by_compatible(fdt, -1, compat); + while (off != -FDT_ERR_NOTFOUND) { + pci_cnt++; + off = fdt_node_offset_by_compatible(fdt, off, compat); + } + + for (off = fdt_node_offset_by_compatible(fdt, -1, compat); + off != -FDT_ERR_NOTFOUND; + off = fdt_node_offset_by_compatible(fdt, off, compat)) { + base_liodn = fdt_getprop(fdt, off, "fsl,liodn", &rc); + if (!base_liodn) { + char path[64]; + + if (fdt_get_path(fdt, off, path, sizeof(path)) < 0) + strcpy(path, "(unknown)"); + printf("WARNING Could not get liodn of node %s: %s\n", + path, fdt_strerror(rc)); + continue; + } + for (i = 0; i < CONFIG_SYS_MAX_PCI_EPS; i++) + liodn_offs[i + 1] = CONFIG_SYS_PCI_EP_LIODN_START + + i * pci_cnt + pci_idx - *base_liodn; + rc = fdt_setprop(fdt, off, "fsl,liodn-offset-list", + liodn_offs, sizeof(liodn_offs)); + if (rc) { + char path[64]; + + if (fdt_get_path(fdt, off, path, sizeof(path)) < 0) + strcpy(path, "(unknown)"); + printf("WARNING Unable to set fsl,liodn-offset-list for " + "node %s: %s\n", path, fdt_strerror(rc)); + continue; + } + pci_idx++; + } +} static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz) { @@ -277,7 +333,9 @@ static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz) void fdt_fixup_liodn(void *blob) { +#ifdef CONFIG_SYS_SRIO fdt_fixup_srio_liodn(blob, srio_liodn_tbl); +#endif fdt_fixup_liodn_tbl(blob, liodn_tbl, liodn_tbl_sz); #ifdef CONFIG_SYS_DPAA_FMAN @@ -295,4 +353,6 @@ void fdt_fixup_liodn(void *blob) #ifdef CONFIG_SYS_DPAA_RMAN fdt_fixup_liodn_tbl(blob, rman_liodn_tbl, rman_liodn_tbl_sz); #endif + + fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie-v2.4"); } diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c index ffc2a9ad65..e1197ac9e5 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.c +++ b/arch/powerpc/cpu/mpc85xx/mp.c @@ -27,9 +27,13 @@ #include <asm/io.h> #include <asm/mmu.h> #include <asm/fsl_law.h> +#include <asm/fsl_ddr_sdram.h> #include "mp.h" DECLARE_GLOBAL_DATA_PTR; +u32 fsl_ddr_get_intl3r(void); + +extern u32 __spin_table[]; u32 get_my_id() { @@ -76,17 +80,16 @@ int cpu_status(int nr) return 0; if (nr == id) { - table = (u32 *)get_spin_virt_addr(); + table = (u32 *)&__spin_table; printf("table base @ 0x%p\n", table); } else { - table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY; + table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY; printf("Running on cpu %d\n", id); printf("\n"); printf("table @ 0x%p\n", table); printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]); - printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]); printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]); - printf(" r6 - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]); + printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]); } return 0; @@ -149,12 +152,11 @@ static u8 boot_entry_map[4] = { 0, BOOT_ENTRY_PIR, BOOT_ENTRY_R3_LOWER, - BOOT_ENTRY_R6_LOWER, }; int cpu_release(int nr, int argc, char * const argv[]) { - u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY; + u32 i, val, *table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY; u64 boot_addr; if (hold_cores_in_reset(1)) @@ -172,8 +174,8 @@ int cpu_release(int nr, int argc, char * const argv[]) boot_addr = simple_strtoull(argv[0], NULL, 16); - /* handle pir, r3, r6 */ - for (i = 1; i < 4; i++) { + /* handle pir, r3 */ + for (i = 1; i < 3; i++) { if (argv[i][0] != '-') { u8 entry = boot_entry_map[i]; val = simple_strtoul(argv[i], NULL, 16); @@ -191,38 +193,80 @@ int cpu_release(int nr, int argc, char * const argv[]) return 0; } -u32 determine_mp_bootpg(void) +u32 determine_mp_bootpg(unsigned int *pagesize) { - /* if we have 4G or more of memory, put the boot page at 4Gb-4k */ - if ((u64)gd->ram_size > 0xfffff000) - return (0xfffff000); + u32 bootpg; +#ifdef CONFIG_SYS_FSL_ERRATUM_A004468 + u32 svr = get_svr(); + u32 granule_size, check; + struct law_entry e; +#endif - return (gd->ram_size - 4096); -} -ulong get_spin_phys_addr(void) -{ - extern ulong __secondary_start_page; - extern ulong __spin_table; + /* use last 4K of mapped memory */ + bootpg = ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ? + CONFIG_MAX_MEM_MAPPED : gd->ram_size) + + CONFIG_SYS_SDRAM_BASE - 4096; + if (pagesize) + *pagesize = 4096; + +#ifdef CONFIG_SYS_FSL_ERRATUM_A004468 +/* + * Erratum A004468 has two parts. The 3-way interleaving applies to T4240, + * to be fixed in rev 2.0. The 2-way interleaving applies to many SoCs. But + * the way boot page chosen in u-boot avoids hitting this erratum. So only + * thw workaround for 3-way interleaving is needed. + * + * To make sure boot page translation works with 3-Way DDR interleaving + * enforce a check for the following constrains + * 8K granule size requires BRSIZE=8K and + * bootpg >> log2(BRSIZE) %3 == 1 + * 4K and 1K granule size requires BRSIZE=4K and + * bootpg >> log2(BRSIZE) %3 == 0 + */ + if (SVR_SOC_VER(svr) == SVR_T4240 && SVR_MAJ(svr) < 2) { + e = find_law(bootpg); + switch (e.trgt_id) { + case LAW_TRGT_IF_DDR_INTLV_123: + granule_size = fsl_ddr_get_intl3r() & 0x1f; + if (granule_size == FSL_DDR_3WAY_8KB_INTERLEAVING) { + if (pagesize) + *pagesize = 8192; + bootpg &= 0xffffe000; /* align to 8KB */ + check = bootpg >> 13; + while ((check % 3) != 1) + check--; + bootpg = check << 13; + debug("Boot page (8K) at 0x%08x\n", bootpg); + break; + } else { + bootpg &= 0xfffff000; /* align to 4KB */ + check = bootpg >> 12; + while ((check % 3) != 0) + check--; + bootpg = check << 12; + debug("Boot page (4K) at 0x%08x\n", bootpg); + } + break; + default: + break; + } + } +#endif /* CONFIG_SYS_FSL_ERRATUM_A004468 */ - return (determine_mp_bootpg() + - (ulong)&__spin_table - (ulong)&__secondary_start_page); + return bootpg; } -ulong get_spin_virt_addr(void) +phys_addr_t get_spin_phys_addr(void) { - extern ulong __secondary_start_page; - extern ulong __spin_table; - - return (CONFIG_BPTR_VIRT_ADDR + - (ulong)&__spin_table - (ulong)&__secondary_start_page); + return virt_to_phys(&__spin_table); } #ifdef CONFIG_FSL_CORENET -static void plat_mp_up(unsigned long bootpg) +static void plat_mp_up(unsigned long bootpg, unsigned int pagesize) { - u32 cpu_up_mask, whoami; - u32 *table = (u32 *)get_spin_virt_addr(); + u32 cpu_up_mask, whoami, brsize = LAW_SIZE_4K; + u32 *table = (u32 *)&__spin_table; volatile ccsr_gur_t *gur; volatile ccsr_local_t *ccm; volatile ccsr_rcpm_t *rcpm; @@ -241,7 +285,11 @@ static void plat_mp_up(unsigned long bootpg) out_be32(&ccm->bstrl, bootpg); e = find_law(bootpg); - out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K); + /* pagesize is only 4K or 8K */ + if (pagesize == 8192) + brsize = LAW_SIZE_8K; + out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | brsize); + debug("BRSIZE is 0x%x\n", brsize); /* readback to sync write */ in_be32(&ccm->bstrar); @@ -294,10 +342,10 @@ static void plat_mp_up(unsigned long bootpg) #endif } #else -static void plat_mp_up(unsigned long bootpg) +static void plat_mp_up(unsigned long bootpg, unsigned int pagesize) { u32 up, cpu_up_mask, whoami; - u32 *table = (u32 *)get_spin_virt_addr(); + u32 *table = (u32 *)&__spin_table; volatile u32 bpcr; volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR); volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -374,27 +422,52 @@ static void plat_mp_up(unsigned long bootpg) void cpu_mp_lmb_reserve(struct lmb *lmb) { - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); lmb_reserve(lmb, bootpg, 4096); } void setup_mp(void) { - extern ulong __secondary_start_page; - extern ulong __bootpg_addr; - ulong fixup = (ulong)&__secondary_start_page; - u32 bootpg = determine_mp_bootpg(); + extern u32 __secondary_start_page; + extern u32 __bootpg_addr, __spin_table_addr, __second_half_boot_page; + + int i; + ulong fixup = (u32)&__secondary_start_page; + u32 bootpg, bootpg_map, pagesize; + + bootpg = determine_mp_bootpg(&pagesize); + + /* + * pagesize is only 4K or 8K + * we only use the last 4K of boot page + * bootpg_map saves the address for the boot page + * 8K is used for the workaround of 3-way DDR interleaving + */ + + bootpg_map = bootpg; + + if (pagesize == 8192) + bootpg += 4096; /* use 2nd half */ /* Some OSes expect secondary cores to be held in reset */ if (hold_cores_in_reset(0)) return; - /* Store the bootpg's SDRAM address for use by secondary CPU cores */ - __bootpg_addr = bootpg; + /* + * Store the bootpg's cache-able half address for use by secondary + * CPU cores to continue to boot + */ + __bootpg_addr = (u32)virt_to_phys(&__second_half_boot_page); + + /* Store spin table's physical address for use by secondary cores */ + __spin_table_addr = (u32)get_spin_phys_addr(); + + /* flush bootpg it before copying invalidate any staled cacheline */ + flush_cache(bootpg, 4096); /* look for the tlb covering the reset page, there better be one */ - int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1); + i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1); /* we found a match */ if (i != -1) { @@ -407,7 +480,7 @@ void setup_mp(void) memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096); - plat_mp_up(bootpg); + plat_mp_up(bootpg_map, pagesize); } else { puts("WARNING: No reset page TLB. " "Skipping secondary core setup\n"); diff --git a/arch/powerpc/cpu/mpc85xx/mp.h b/arch/powerpc/cpu/mpc85xx/mp.h index 87bac37152..ad9950bcf5 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.h +++ b/arch/powerpc/cpu/mpc85xx/mp.h @@ -3,8 +3,7 @@ #include <asm/mp.h> -ulong get_spin_phys_addr(void); -ulong get_spin_virt_addr(void); +phys_addr_t get_spin_phys_addr(void); u32 get_my_id(void); int hold_cores_in_reset(int verbose); @@ -16,7 +15,7 @@ int hold_cores_in_reset(int verbose); #define BOOT_ENTRY_PIR 5 #define BOOT_ENTRY_R6_UPPER 6 #define BOOT_ENTRY_R6_LOWER 7 -#define NUM_BOOT_ENTRY 8 +#define NUM_BOOT_ENTRY 16 /* pad to 64 bytes */ #define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32)) #endif diff --git a/arch/powerpc/cpu/mpc85xx/p5040_ids.c b/arch/powerpc/cpu/mpc85xx/p5040_ids.c new file mode 100644 index 0000000000..878ee3e73e --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p5040_ids.c @@ -0,0 +1,127 @@ +/* + * Copyright 2010-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 2, 1, 0), + SET_QP_INFO(3, 4, 2, 1), + SET_QP_INFO(5, 6, 3, 2), + SET_QP_INFO(7, 8, 4, 3), + SET_QP_INFO(9, 10, 5, 0), + SET_QP_INFO(11, 12, 6, 1), + SET_QP_INFO(13, 14, 7, 2), + SET_QP_INFO(15, 16, 8, 3), + SET_QP_INFO(17, 18, 9, 0), /* for now, set sdest to 0 */ + SET_QP_INFO(19, 20, 10, 0), /* for now, set sdest to 0 */ +}; +#endif + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(31), + SET_BMAN_LIODN(32), +#endif + + SET_SDHC_LIODN(1, 64), + + SET_USB_LIODN(1, "fsl-usb2-mph", 93), + SET_USB_LIODN(2, "fsl-usb2-dr", 94), + + SET_SATA_LIODN(1, 95), + SET_SATA_LIODN(2, 96), + + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 195), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 196), + SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 197), + + SET_DMA_LIODN(1, 193), + SET_DMA_LIODN(2, 194), +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 6), + SET_FMAN_RX_1G_LIODN(1, 1, 7), + SET_FMAN_RX_1G_LIODN(1, 2, 8), + SET_FMAN_RX_1G_LIODN(1, 3, 9), + SET_FMAN_RX_1G_LIODN(1, 4, 10), + SET_FMAN_RX_10G_LIODN(1, 0, 11), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); + +#if (CONFIG_SYS_NUM_FMAN == 2) +struct liodn_id_table fman2_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(2, 0, 12), + SET_FMAN_RX_1G_LIODN(2, 1, 13), + SET_FMAN_RX_1G_LIODN(2, 2, 14), + SET_FMAN_RX_1G_LIODN(2, 3, 15), + SET_FMAN_RX_1G_LIODN(2, 4, 16), + SET_FMAN_RX_10G_LIODN(2, 0, 17), +}; +int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl); +#endif +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 129, 130), + SET_SEC_JR_LIODN_ENTRY(1, 131, 132), + SET_SEC_JR_LIODN_ENTRY(2, 133, 134), + SET_SEC_JR_LIODN_ENTRY(3, 135, 136), + SET_SEC_RTIC_LIODN_ENTRY(a, 89), + SET_SEC_RTIC_LIODN_ENTRY(b, 90), + SET_SEC_RTIC_LIODN_ENTRY(c, 91), + SET_SEC_RTIC_LIODN_ENTRY(d, 92), + SET_SEC_DECO_LIODN_ENTRY(0, 139, 140), + SET_SEC_DECO_LIODN_ENTRY(1, 141, 142), + SET_SEC_DECO_LIODN_ENTRY(2, 143, 144), + SET_SEC_DECO_LIODN_ENTRY(3, 145, 146), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_FSL_RAID_ENGINE +struct liodn_id_table raide_liodn_tbl[] = { + SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 0, 60), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 1, 61), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 0, 62), + SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 1, 63), +}; +int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(64, 101), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32), +#endif +#if (CONFIG_SYS_NUM_FMAN == 2) + [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(160), +#endif +#ifdef CONFIG_SYS_FSL_RAID_ENGINE + [FSL_HW_PORTAL_RAID_ENGINE] = SET_LIODN_BASE_1(49), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/p5040_serdes.c b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c new file mode 100644 index 0000000000..890b88e4e3 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c @@ -0,0 +1,117 @@ +/* + * Copyright 2009-2011 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/processor.h> +#include <asm/io.h> +#include "fsl_corenet_serdes.h" + +/* + * Note: For P5040, the fourth SerDes bank (with two lanes) is on SerDes2, but + * U-boot only supports one SerDes controller. Therefore, we ignore bank 4 in + * this table. This works because most of the SerDes code is for errata + * work-arounds, and there are no P5040 errata that effect bank 4. + */ + +static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = { + [0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2, */ }, + [0x01] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1, + XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM2, /* SATA1, SATA2 */ }, + [0x02] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ }, + [0x03] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM2_DTSEC1, + SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + /* SATA1, SATA2 */ }, + [0x04] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM2_DTSEC1, + SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, + /* SATA1, SATA2 */ }, + [0x05] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM1_DTSEC3, + SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, + XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ }, + [0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, + XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ }, + [0x07] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, + SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1, + XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2, + XAUI_FM2, /* SATA1, SATA2 */ }, + [0x11] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2, + /* NONE, NONE */ }, + [0x15] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, + NONE, NONE, SATA1, SATA2, /* NONE, NONE */ }, + [0x2a] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2, + AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, + XAUI_FM2, XAUI_FM2, /* NONE, NONE */ }, + [0x34] = {PCIE1, PCIE1, PCIE1, PCIE1, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, + AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, + NONE, SATA1, SATA2, /* NONE, NONE */ }, + [0x35] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, AURORA, XAUI_FM1, + XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, NONE, SATA1, SATA2, + /* NONE, NONE */ }, + [0x36] = {PCIE1, PCIE1, PCIE3, PCIE3, SGMII_FM1_DTSEC1, + SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, + AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, + NONE, SATA1, SATA2, /* NONE, NONE */ }, +}; + +enum srds_prtcl serdes_get_prtcl(int cfg, int lane) +{ + if (!serdes_lane_enabled(lane)) + return NONE; + + return serdes_cfg_tbl[cfg][lane]; +} + +int is_serdes_prtcl_valid(u32 prtcl) +{ + int i; + + if (prtcl > ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (serdes_cfg_tbl[prtcl][i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c index 6199633541..b59ef69f1f 100644 --- a/arch/powerpc/cpu/mpc85xx/portals.c +++ b/arch/powerpc/cpu/mpc85xx/portals.c @@ -182,14 +182,18 @@ void fdt_fixup_qportals(void *blob) { int off, err; unsigned int maj, min; + unsigned int ip_cfg; u32 rev_1 = in_be32(&qman->ip_rev_1); + u32 rev_2 = in_be32(&qman->ip_rev_2); char compat[64]; int compat_len; maj = (rev_1 >> 8) & 0xff; min = rev_1 & 0xff; + ip_cfg = rev_2 & 0xff; - compat_len = sprintf(compat, "fsl,qman-portal-%u.%u", maj, min) + 1; + compat_len = sprintf(compat, "fsl,qman-portal-%u.%u.%u", + maj, min, ip_cfg) + 1; compat_len += sprintf(compat + compat_len, "fsl,qman-portal") + 1; off = fdt_node_offset_by_compatible(blob, -1, "fsl,qman-portal"); @@ -267,14 +271,19 @@ void fdt_fixup_bportals(void *blob) { int off, err; unsigned int maj, min; + unsigned int ip_cfg; u32 rev_1 = in_be32(&bman->ip_rev_1); + u32 rev_2 = in_be32(&bman->ip_rev_2); char compat[64]; int compat_len; maj = (rev_1 >> 8) & 0xff; min = rev_1 & 0xff; - compat_len = sprintf(compat, "fsl,bman-portal-%u.%u", maj, min) + 1; + ip_cfg = rev_2 & 0xff; + + compat_len = sprintf(compat, "fsl,bman-portal-%u.%u.%u", + maj, min, ip_cfg) + 1; compat_len += sprintf(compat + compat_len, "fsl,bman-portal") + 1; off = fdt_node_offset_by_compatible(blob, -1, "fsl,bman-portal"); diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 22e73e0661..4ba44a9028 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -150,29 +150,33 @@ __secondary_start_page: #define toreset(x) (x - __secondary_start_page + 0xfffff000) /* get our PIR to figure out our table entry */ - lis r3,toreset(__spin_table)@h - ori r3,r3,toreset(__spin_table)@l + lis r3,toreset(__spin_table_addr)@h + ori r3,r3,toreset(__spin_table_addr)@l + lwz r3,0(r3) - /* r10 has the base address for the entry */ + /* + * r10 has the base address for the entry. + * we cannot access it yet before setting up a new TLB + */ mfspr r0,SPRN_PIR #if defined(CONFIG_E6500) /* * PIR definition for E6500 * 0-17 Reserved (logic 0s) - * 8-19 CHIP_ID, 2’b00 - SoC 1 + * 8-19 CHIP_ID, 2'b00 - SoC 1 * all others - reserved - * 20-24 CLUSTER_ID 5’b00000 - CCM 1 + * 20-24 CLUSTER_ID 5'b00000 - CCM 1 * all others - reserved - * 25-26 CORE_CLUSTER_ID 2’b00 - cluster 1 - * 2’b01 - cluster 2 - * 2’b10 - cluster 3 - * 2’b11 - cluster 4 - * 27-28 CORE_ID 2’b00 - core 0 - * 2’b01 - core 1 - * 2’b10 - core 2 - * 2’b11 - core 3 - * 29-31 THREAD_ID 3’b000 - thread 0 - * 3’b001 - thread 1 + * 25-26 CORE_CLUSTER_ID 2'b00 - cluster 1 + * 2'b01 - cluster 2 + * 2'b10 - cluster 3 + * 2'b11 - cluster 4 + * 27-28 CORE_ID 2'b00 - core 0 + * 2'b01 - core 1 + * 2'b10 - core 2 + * 2'b11 - core 3 + * 29-31 THREAD_ID 3'b000 - thread 0 + * 3'b001 - thread 1 */ rlwinm r4,r0,29,25,31 #elif defined(CONFIG_E500MC) @@ -180,16 +184,9 @@ __secondary_start_page: #else mr r4,r0 #endif - slwi r8,r4,5 + slwi r8,r4,6 /* spin table is padded to 64 byte */ add r10,r3,r8 -#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING) - /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ - slwi r8,r4,1 - addi r8,r8,32 - mtspr L1CSR2,r8 -#endif - #ifdef CONFIG_E6500 mfspr r0,SPRN_PIR /* @@ -209,6 +206,13 @@ __secondary_start_page: mtspr SPRN_PIR,r4 /* write to PIR register */ +#ifdef CONFIG_SYS_CACHE_STASHING + /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ + slwi r8,r4,1 + addi r8,r8,32 + mtspr L1CSR2,r8 +#endif + #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011) /* @@ -277,73 +281,111 @@ __secondary_start_page: beq 2b #endif 3: - -#define EPAPR_MAGIC (0x45504150) -#define ENTRY_ADDR_UPPER 0 -#define ENTRY_ADDR_LOWER 4 -#define ENTRY_R3_UPPER 8 -#define ENTRY_R3_LOWER 12 -#define ENTRY_RESV 16 -#define ENTRY_PIR 20 -#define ENTRY_R6_UPPER 24 -#define ENTRY_R6_LOWER 28 -#define ENTRY_SIZE 32 - - /* setup the entry */ - li r3,0 - li r8,1 - stw r4,ENTRY_PIR(r10) - stw r3,ENTRY_ADDR_UPPER(r10) - stw r8,ENTRY_ADDR_LOWER(r10) - stw r3,ENTRY_R3_UPPER(r10) - stw r4,ENTRY_R3_LOWER(r10) - stw r3,ENTRY_R6_UPPER(r10) - stw r3,ENTRY_R6_LOWER(r10) - - /* load r13 with the address of the 'bootpg' in SDRAM */ - lis r13,toreset(__bootpg_addr)@h - ori r13,r13,toreset(__bootpg_addr)@l + /* setup mapping for the spin table, WIMGE=0b00100 */ + lis r13,toreset(__spin_table_addr)@h + ori r13,r13,toreset(__spin_table_addr)@l lwz r13,0(r13) + /* mask by 4K */ + rlwinm r13,r13,0,0,19 - /* setup mapping for AS = 1, and jump there */ lis r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h mtspr SPRN_MAS0,r11 lis r11,(MAS1_VALID|MAS1_IPROT)@h ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l mtspr SPRN_MAS1,r11 - oris r11,r13,(MAS2_I|MAS2_G)@h - ori r11,r13,(MAS2_I|MAS2_G)@l + oris r11,r13,(MAS2_M|MAS2_G)@h + ori r11,r13,(MAS2_M|MAS2_G)@l mtspr SPRN_MAS2,r11 oris r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h ori r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l mtspr SPRN_MAS3,r11 + li r11,0 + mtspr SPRN_MAS7,r11 tlbwe - bl 1f -1: mflr r11 /* - * OR in 0xfff to create a mask of the bootpg SDRAM address. We use - * this mask to fixup the cpu spin table and the address that we want - * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the - * bootpg is at 0x7ffff000 in SDRAM. + * __bootpg_addr has the address of __second_half_boot_page + * jump there in AS=1 space with cache enabled */ - ori r13,r13,0xfff - and r11, r11, r13 - and r10, r10, r13 - - addi r11,r11,(2f-1b) + lis r13,toreset(__bootpg_addr)@h + ori r13,r13,toreset(__bootpg_addr)@l + lwz r11,0(r13) + mtspr SPRN_SRR0,r11 mfmsr r13 ori r12,r13,MSR_IS|MSR_DS@l - - mtspr SPRN_SRR0,r11 mtspr SPRN_SRR1,r12 rfi + /* + * Allocate some space for the SDRAM address of the bootpg. + * This variable has to be in the boot page so that it can + * be accessed by secondary cores when they come out of reset. + */ + .align L1_CACHE_SHIFT + .globl __bootpg_addr +__bootpg_addr: + .long 0 + + .global __spin_table_addr +__spin_table_addr: + .long 0 + + /* + * This variable is set by cpu_init_r() after parsing hwconfig + * to enable workaround for erratum NMG_CPU_A011. + */ + .align L1_CACHE_SHIFT + .global enable_cpu_a011_workaround +enable_cpu_a011_workaround: + .long 1 + + /* Fill in the empty space. The actual reset vector is + * the last word of the page */ +__secondary_start_code_end: + .space 4092 - (__secondary_start_code_end - __secondary_start_page) +__secondary_reset_vector: + b __secondary_start_page + + +/* this is a separated page for the spin table and cacheable boot code */ + .align L1_CACHE_SHIFT + .global __second_half_boot_page +__second_half_boot_page: +#define EPAPR_MAGIC 0x45504150 +#define ENTRY_ADDR_UPPER 0 +#define ENTRY_ADDR_LOWER 4 +#define ENTRY_R3_UPPER 8 +#define ENTRY_R3_LOWER 12 +#define ENTRY_RESV 16 +#define ENTRY_PIR 20 +#define ENTRY_SIZE 64 + /* + * setup the entry + * r10 has the base address of the spin table. + * spin table is defined as + * struct { + * uint64_t entry_addr; + * uint64_t r3; + * uint32_t rsvd1; + * uint32_t pir; + * }; + * we pad this struct to 64 bytes so each entry is in its own cacheline + */ + li r3,0 + li r8,1 + mfspr r4,SPRN_PIR + stw r3,ENTRY_ADDR_UPPER(r10) + stw r3,ENTRY_R3_UPPER(r10) + stw r4,ENTRY_R3_LOWER(r10) + stw r3,ENTRY_RESV(r10) + stw r4,ENTRY_PIR(r10) + msync + stw r8,ENTRY_ADDR_LOWER(r10) + /* spin waiting for addr */ -2: - lwz r4,ENTRY_ADDR_LOWER(r10) +3: lwz r4,ENTRY_ADDR_LOWER(r10) andi. r11,r4,1 - bne 2b + bne 3b isync /* setup IVORs to match fixed offsets */ @@ -362,11 +404,20 @@ __secondary_start_page: /* mask by ~64M to setup our tlb we will jump to */ rlwinm r12,r4,0,0,5 - /* setup r3, r4, r5, r6, r7, r8, r9 */ + /* + * setup r3, r4, r5, r6, r7, r8, r9 + * r3 contains the value to put in the r3 register at secondary cpu + * entry. The high 32-bits are ignored on 32-bit chip implementations. + * 64-bit chip implementations however shall load all 64-bits + */ +#ifdef CONFIG_SYS_PPC64 + ld r3,ENTRY_R3_UPPER(r10) +#else lwz r3,ENTRY_R3_LOWER(r10) +#endif li r4,0 li r5,0 - lwz r6,ENTRY_R6_LOWER(r10) + li r6,0 lis r7,(64*1024*1024)@h li r8,0 li r9,0 @@ -404,32 +455,10 @@ __secondary_start_page: mtspr SPRN_SRR1,r13 rfi - /* - * Allocate some space for the SDRAM address of the bootpg. - * This variable has to be in the boot page so that it can - * be accessed by secondary cores when they come out of reset. - */ - .globl __bootpg_addr -__bootpg_addr: - .long 0 - .align L1_CACHE_SHIFT + .align 6 .globl __spin_table __spin_table: .space CONFIG_MAX_CPUS*ENTRY_SIZE - - /* - * This variable is set by cpu_init_r() after parsing hwconfig - * to enable workaround for erratum NMG_CPU_A011. - */ - .align L1_CACHE_SHIFT - .global enable_cpu_a011_workaround -enable_cpu_a011_workaround: - .long 1 - - /* Fill in the empty space. The actual reset vector is - * the last word of the page */ -__secondary_start_code_end: - .space 4092 - (__secondary_start_code_end - __secondary_start_page) -__secondary_reset_vector: - b __secondary_start_page +__spin_table_end: + .space 4096 - (__spin_table_end - __spin_table) diff --git a/arch/powerpc/cpu/mpc85xx/serial_scc.c b/arch/powerpc/cpu/mpc85xx/serial_scc.c index fe9af55c7a..6345362d88 100644 --- a/arch/powerpc/cpu/mpc85xx/serial_scc.c +++ b/arch/powerpc/cpu/mpc85xx/serial_scc.c @@ -220,13 +220,6 @@ static void mpc85xx_serial_putc(const char c) tbdf->cbd_sc |= BD_SC_READY; } -static void mpc85xx_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static int mpc85xx_serial_getc(void) { volatile cbd_t *rbdf; @@ -268,7 +261,7 @@ static struct serial_device mpc85xx_serial_drv = { .stop = NULL, .setbrg = mpc85xx_serial_setbrg, .putc = mpc85xx_serial_putc, - .puts = mpc85xx_serial_puts, + .puts = default_serial_puts, .getc = mpc85xx_serial_getc, .tstc = mpc85xx_serial_tstc, }; diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index abfeb268d4..801ee078c0 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -39,6 +39,10 @@ DECLARE_GLOBAL_DATA_PTR; void get_sys_info (sys_info_t * sysInfo) { volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#ifdef CONFIG_FSL_IFC + struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR; + u32 ccr; +#endif #ifdef CONFIG_FSL_CORENET volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR); unsigned int cpu; @@ -72,16 +76,22 @@ void get_sys_info (sys_info_t * sysInfo) [13] = 2, /* CC4 PPL / 2 */ [14] = 4, /* CC4 PPL / 4 */ }; - uint lcrr_div, i, freqCC_PLL[4], rcw_tmp; - uint ratio[4]; + uint i, freqCC_PLL[6], rcw_tmp; + uint ratio[6]; unsigned long sysclk = CONFIG_SYS_CLK_FREQ; uint mem_pll_rat; sysInfo->freqSystemBus = sysclk; +#ifdef CONFIG_DDR_CLK_FREQ + sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ; +#else sysInfo->freqDDRBus = sysclk; +#endif sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; - mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> 17) & 0x1f; + mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> + FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT) + & FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK; if (mem_pll_rat > 2) sysInfo->freqDDRBus *= mem_pll_rat; else @@ -91,27 +101,151 @@ void get_sys_info (sys_info_t * sysInfo) ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f; ratio[2] = (in_be32(&clk->pllc3gsr) >> 1) & 0x3f; ratio[3] = (in_be32(&clk->pllc4gsr) >> 1) & 0x3f; - for (i = 0; i < 4; i++) { + ratio[4] = (in_be32(&clk->pllc5gsr) >> 1) & 0x3f; + ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f; + for (i = 0; i < 6; i++) { if (ratio[i] > 4) freqCC_PLL[i] = sysclk * ratio[i]; else freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i]; } - rcw_tmp = in_be32(&gur->rcwsr[3]); +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + /* + * Each cluster has up to 4 cores, sharing the same PLL selection. + * The cluster assignment is fixed per SoC. There is no way identify the + * assignment so far, presuming the "first configuration" which is to + * fill the lower cluster group first before moving up to next group. + * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1 + * and core 4~7 on cluster 2 + * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3 + * and core 12~15 on cluster 4 if existing + */ for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) { - u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf; + u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27) + & 0xf; u32 cplx_pll = core_cplx_PLL[c_pll_sel]; + if (cplx_pll > 3) + printf("Unsupported architecture configuration" + " in function %s\n", __func__); + cplx_pll += (cpu / 8) * 3; sysInfo->freqProcessor[cpu] = freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; } +#define PME_CLK_SEL 0xe0000000 +#define PME_CLK_SHIFT 29 +#define FM1_CLK_SEL 0x1c000000 +#define FM1_CLK_SHIFT 26 + rcw_tmp = in_be32(&gur->rcwsr[7]); + +#ifdef CONFIG_SYS_DPAA_PME + switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) { + case 1: + sysInfo->freqPME = freqCC_PLL[0]; + break; + case 2: + sysInfo->freqPME = freqCC_PLL[0] / 2; + break; + case 3: + sysInfo->freqPME = freqCC_PLL[0] / 3; + break; + case 4: + sysInfo->freqPME = freqCC_PLL[0] / 4; + break; + case 6: + sysInfo->freqPME = freqCC_PLL[1] / 2; + break; + case 7: + sysInfo->freqPME = freqCC_PLL[1] / 3; + break; + default: + printf("Error: Unknown PME clock select!\n"); + case 0: + sysInfo->freqPME = sysInfo->freqSystemBus / 2; + break; + } +#endif + +#ifdef CONFIG_SYS_DPAA_QBMAN + sysInfo->freqQMAN = sysInfo->freqSystemBus / 2; +#endif + +#ifdef CONFIG_SYS_DPAA_FMAN + switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) { + case 1: + sysInfo->freqFMan[0] = freqCC_PLL[3]; + break; + case 2: + sysInfo->freqFMan[0] = freqCC_PLL[3] / 2; + break; + case 3: + sysInfo->freqFMan[0] = freqCC_PLL[3] / 3; + break; + case 4: + sysInfo->freqFMan[0] = freqCC_PLL[3] / 4; + break; + case 6: + sysInfo->freqFMan[0] = freqCC_PLL[4] / 2; + break; + case 7: + sysInfo->freqFMan[0] = freqCC_PLL[4] / 3; + break; + default: + printf("Error: Unknown FMan1 clock select!\n"); + case 0: + sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2; + break; + } +#if (CONFIG_SYS_NUM_FMAN) == 2 +#define FM2_CLK_SEL 0x00000038 +#define FM2_CLK_SHIFT 3 + rcw_tmp = in_be32(&gur->rcwsr[15]); + switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) { + case 1: + sysInfo->freqFMan[1] = freqCC_PLL[4]; + break; + case 2: + sysInfo->freqFMan[1] = freqCC_PLL[4] / 2; + break; + case 3: + sysInfo->freqFMan[1] = freqCC_PLL[4] / 3; + break; + case 4: + sysInfo->freqFMan[1] = freqCC_PLL[4] / 4; + break; + case 6: + sysInfo->freqFMan[1] = freqCC_PLL[3] / 2; + break; + case 7: + sysInfo->freqFMan[1] = freqCC_PLL[3] / 3; + break; + default: + printf("Error: Unknown FMan2 clock select!\n"); + case 0: + sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2; + break; + } +#endif /* CONFIG_SYS_NUM_FMAN == 2 */ +#endif /* CONFIG_SYS_DPAA_FMAN */ + +#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ + + for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) { + u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf; + u32 cplx_pll = core_cplx_PLL[c_pll_sel]; + + sysInfo->freqProcessor[cpu] = + freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; + } #define PME_CLK_SEL 0x80000000 #define FM1_CLK_SEL 0x40000000 #define FM2_CLK_SEL 0x20000000 #define HWA_ASYNC_DIV 0x04000000 #if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2) #define HWA_CC_PLL 1 +#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 3) +#define HWA_CC_PLL 2 #elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4) #define HWA_CC_PLL 2 #else @@ -151,11 +285,10 @@ void get_sys_info (sys_info_t * sysInfo) #endif #endif -#else - uint plat_ratio,e500_ratio,half_freqSystemBus; -#if defined(CONFIG_FSL_LBC) - uint lcrr_div; -#endif +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ + +#else /* CONFIG_FSL_CORENET */ + uint plat_ratio, e500_ratio, half_freqSystemBus; int i; #ifdef CONFIG_QE __maybe_unused u32 qe_ratio; @@ -202,6 +335,7 @@ void get_sys_info (sys_info_t * sysInfo) #endif /* CONFIG_FSL_CORENET */ #if defined(CONFIG_FSL_LBC) + uint lcrr_div; #if defined(CONFIG_SYS_LBC_LCRR) /* We will program LCRR to this value later */ lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV; @@ -228,6 +362,13 @@ void get_sys_info (sys_info_t * sysInfo) sysInfo->freqLocalBus = lcrr_div; } #endif + +#if defined(CONFIG_FSL_IFC) + ccr = in_be32(&ifc_regs->ifc_ccr); + ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1; + + sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr; +#endif } diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 9e04257d2c..ac17f9d3ca 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -169,7 +169,7 @@ l2_disabled: * */ -#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING) +#ifdef CONFIG_SYS_CACHE_STASHING /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ li r2,(32 + 0) mtspr L1CSR2,r2 @@ -211,6 +211,77 @@ l2_disabled: andi. r1,r3,L1CSR0_DCE@l beq 2b + .macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch + lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l + mtspr MAS0, \scratch + lis \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@h + ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@l + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h + ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l + mtspr MAS3, \scratch + lis \scratch, \phy_high@h + ori \scratch, \scratch, \phy_high@l + mtspr MAS7, \scratch + isync + msync + tlbwe + isync + .endm + + .macro create_tlb0_entry esel ts tsize epn wimg rpn perm phy_high scratch + lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l + mtspr MAS0, \scratch + lis \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@h + ori \scratch, \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@l + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + lis \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h + ori \scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l + mtspr MAS3, \scratch + lis \scratch, \phy_high@h + ori \scratch, \scratch, \phy_high@l + mtspr MAS7, \scratch + isync + msync + tlbwe + isync + .endm + + .macro delete_tlb1_entry esel scratch + lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l + mtspr MAS0, \scratch + li \scratch, 0 + mtspr MAS1, \scratch + isync + msync + tlbwe + isync + .endm + + .macro delete_tlb0_entry esel epn wimg scratch + lis \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h + ori \scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l + mtspr MAS0, \scratch + li \scratch, 0 + mtspr MAS1, \scratch + lis \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h + ori \scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l + mtspr MAS2, \scratch + isync + msync + tlbwe + isync + .endm + #if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL) /* * TLB entry for debuggging in AS1 @@ -220,61 +291,35 @@ l2_disabled: * in AS1. */ - lis r6,FSL_BOOKE_MAS0(1, - CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(1, - CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@l - #if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) /* * TLB entry is created for IVPR + IVOR15 to map on valid OP code address * bacause flash's virtual address maps to 0xff800000 - 0xffffffff. * and this window is outside of 4K boot window. */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, - (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, - (MAS2_I|MAS2_G))@l + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_4M, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 - /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ - lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l #elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #else /* * TLB entry is created for IVPR + IVOR15 to map on valid OP code address * because "nexti" will resize TLB to 4K */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, - (MAS2_I))@l - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_256K, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I, \ + CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #endif - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - tlbwe - isync #endif /* @@ -392,27 +437,11 @@ l2_disabled: */ /* create a temp mapping TLB0[0] for LBCR */ - lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l - - lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l - - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - isync - msync - tlbwe + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G, \ + CONFIG_SYS_LBC_ADDR, MAS3_SW|MAS3_SR, \ + 0, r6 /* Set LBCR register */ lis r4,CONFIG_SYS_LBCR_ADDR@h @@ -551,49 +580,22 @@ create_ccsr_new_tlb: ori r8, r8, CONFIG_SYS_CCSRBAR@l lis r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h ori r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l - lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l - lis r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h - ori r1, r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l - lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h - ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l -#ifdef CONFIG_ENABLE_36BIT_PHYS - lis r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h - ori r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l - mtspr MAS7, r7 -#endif - mtspr MAS0, r0 - mtspr MAS1, r1 - mtspr MAS2, r2 - mtspr MAS3, r3 - isync - msync - tlbwe - + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_PHYS_LOW, MAS3_SW|MAS3_SR, \ + CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3 /* * Create a TLB for the current location of CCSR. Register R9 is reserved * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000). */ create_ccsr_old_tlb: - lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l - lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h - ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l -#ifdef CONFIG_ENABLE_36BIT_PHYS - li r7, 0 /* The default CCSR address is always a 32-bit number */ - mtspr MAS7, r7 -#endif - mtspr MAS0, r0 - /* MAS1 is the same as above */ - mtspr MAS2, r2 - mtspr MAS3, r3 - isync - msync - tlbwe + create_tlb0_entry 1, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_DEFAULT, MAS3_SW|MAS3_SR, \ + 0, r3 /* The default CCSR address is always a 32-bit number */ + /* * We have a TLB for what we think is the current (old) CCSR. Let's @@ -743,29 +745,46 @@ write_new_ccsrbar: /* Delete the temporary TLBs */ delete_temp_tlbs: - lis r0, FSL_BOOKE_MAS0(0, 0, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l - li r1, 0 - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l - mtspr MAS0, r0 - mtspr MAS1, r1 - mtspr MAS2, r2 - isync - msync - tlbwe + delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, r3 + delete_tlb0_entry 1, CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, r3 - lis r0, FSL_BOOKE_MAS0(0, 1, 0)@h - ori r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l - lis r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h - ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l - mtspr MAS0, r0 - mtspr MAS2, r2 - isync - msync - tlbwe #endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */ +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +create_ccsr_l2_tlb: + /* + * Create a TLB for the MMR location of CCSR + * to access L2CSR0 register + */ + create_tlb0_entry 0, \ + 0, BOOKE_PAGESZ_4K, \ + CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, \ + CONFIG_SYS_CCSRBAR_PHYS_LOW + 0xC20000, MAS3_SW|MAS3_SR, \ + CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3 + +enable_l2_cluster_l2: + /* enable L2 cache */ + lis r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@h + ori r3, r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@l + li r4, 33 /* stash id */ + stw r4, 4(r3) + lis r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@h + ori r4, r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@l + sync + stw r4, 0(r3) /* invalidate L2 */ +1: sync + lwz r0, 0(r3) + twi 0, r0, 0 + isync + and. r1, r0, r4 + bne 1b + lis r4, L2CSR0_L2E@h + sync + stw r4, 0(r3) /* eanble L2 */ +delete_ccsr_l2_tlb: + delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3 +#endif + #ifdef CONFIG_SYS_FSL_ERRATUM_A004510 #define DCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000) #define LAW_SIZE_1M 0x13 @@ -1019,83 +1038,50 @@ create_init_ram_area: #if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) /* create a temp mapping in AS=1 to the 4M boot window */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_4M, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l - - /* The 85xx has the default boot window 0xff800000 - 0xffffffff */ - lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l #elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) /* create a temp mapping in AS = 1 for Flash mapping * created by PBL for ISBC code */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #else /* * create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main * image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage. */ - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l - - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry 15, \ + 1, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #endif - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - isync - msync - tlbwe - /* create a temp mapping in AS=1 to the stack */ - lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h - ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l - - lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h - ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l - - lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h - ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l - #if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \ defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH) - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0, - (MAS3_SX|MAS3_SW|MAS3_SR))@l - li r10,CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH - mtspr MAS7,r10 + create_tlb1_entry 14, \ + 1, BOOKE_PAGESZ_16K, \ + CONFIG_SYS_INIT_RAM_ADDR, 0, \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH, r6 + #else - lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + create_tlb1_entry 14, \ + 1, BOOKE_PAGESZ_16K, \ + CONFIG_SYS_INIT_RAM_ADDR, 0, \ + CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 #endif - mtspr MAS0,r6 - mtspr MAS1,r7 - mtspr MAS2,r8 - mtspr MAS3,r9 - isync - msync - tlbwe - lis r6,MSR_IS|MSR_DS|MSR_DE@h ori r6,r6,MSR_IS|MSR_DS|MSR_DE@l lis r7,switch_as@h diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c new file mode 100644 index 0000000000..a8f16b1cd6 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c @@ -0,0 +1,203 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> + +#ifdef CONFIG_SYS_DPAA_QBMAN +struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { + /* dqrr liodn, frame data liodn, liodn off, sdest */ + SET_QP_INFO(1, 27, 1, 0), + SET_QP_INFO(2, 28, 1, 0), + SET_QP_INFO(3, 29, 1, 1), + SET_QP_INFO(4, 30, 1, 1), + SET_QP_INFO(5, 31, 1, 2), + SET_QP_INFO(6, 32, 1, 2), + SET_QP_INFO(7, 33, 1, 3), + SET_QP_INFO(8, 34, 1, 3), + SET_QP_INFO(9, 35, 1, 4), + SET_QP_INFO(10, 36, 1, 4), + SET_QP_INFO(11, 37, 1, 5), + SET_QP_INFO(12, 38, 1, 5), + SET_QP_INFO(13, 39, 1, 6), + SET_QP_INFO(14, 40, 1, 6), + SET_QP_INFO(15, 41, 1, 7), + SET_QP_INFO(16, 42, 1, 7), + SET_QP_INFO(17, 43, 1, 8), + SET_QP_INFO(18, 44, 1, 8), + SET_QP_INFO(19, 45, 1, 9), + SET_QP_INFO(20, 46, 1, 9), + SET_QP_INFO(21, 47, 1, 10), + SET_QP_INFO(22, 48, 1, 10), + SET_QP_INFO(23, 49, 1, 11), + SET_QP_INFO(24, 50, 1, 11), + SET_QP_INFO(65, 89, 1, 0), + SET_QP_INFO(66, 90, 1, 0), + SET_QP_INFO(67, 91, 1, 1), + SET_QP_INFO(68, 92, 1, 1), + SET_QP_INFO(69, 93, 1, 2), + SET_QP_INFO(70, 94, 1, 2), + SET_QP_INFO(71, 95, 1, 3), + SET_QP_INFO(72, 96, 1, 3), + SET_QP_INFO(73, 97, 1, 4), + SET_QP_INFO(74, 98, 1, 4), + SET_QP_INFO(75, 99, 1, 5), + SET_QP_INFO(76, 100, 1, 5), + SET_QP_INFO(77, 101, 1, 6), + SET_QP_INFO(78, 102, 1, 6), + SET_QP_INFO(79, 103, 1, 7), + SET_QP_INFO(80, 104, 1, 7), + SET_QP_INFO(81, 105, 1, 8), + SET_QP_INFO(82, 106, 1, 8), + SET_QP_INFO(83, 107, 1, 9), + SET_QP_INFO(84, 108, 1, 9), + SET_QP_INFO(85, 109, 1, 10), + SET_QP_INFO(86, 110, 1, 10), + SET_QP_INFO(87, 111, 1, 11), + SET_QP_INFO(88, 112, 1, 11), + SET_QP_INFO(25, 51, 1, 0), + SET_QP_INFO(26, 52, 1, 0), +}; +#endif + +struct srio_liodn_id_table srio_liodn_tbl[] = { + SET_SRIO_LIODN_1(1, 307), + SET_SRIO_LIODN_1(2, 387), +}; +int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); + +struct liodn_id_table liodn_tbl[] = { +#ifdef CONFIG_SYS_DPAA_QBMAN + SET_QMAN_LIODN(62), + SET_BMAN_LIODN(63), +#endif + + SET_SDHC_LIODN(1, 552), + + SET_PME_LIODN(117), + + SET_USB_LIODN(1, "fsl-usb2-mph", 553), + SET_USB_LIODN(2, "fsl-usb2-dr", 554), + + SET_SATA_LIODN(1, 555), + SET_SATA_LIODN(2, 556), + + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148), + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228), + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308), + SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388), + + SET_DMA_LIODN(1, 147), + SET_DMA_LIODN(2, 227), + + SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0), + SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0), + SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0), + SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0), + +#ifdef CONFIG_SYS_PMAN + SET_PMAN_LIODN(1, 513), + SET_PMAN_LIODN(2, 514), + SET_PMAN_LIODN(3, 515), +#endif + + /* SET_NEXUS_LIODN(557), -- not yet implemented */ +}; +int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_FMAN +struct liodn_id_table fman1_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(1, 0, 88), + SET_FMAN_RX_1G_LIODN(1, 1, 89), + SET_FMAN_RX_1G_LIODN(1, 2, 90), + SET_FMAN_RX_1G_LIODN(1, 3, 91), + SET_FMAN_RX_1G_LIODN(1, 4, 92), + SET_FMAN_RX_1G_LIODN(1, 5, 93), + SET_FMAN_RX_10G_LIODN(1, 0, 94), + SET_FMAN_RX_10G_LIODN(1, 1, 95), +}; +int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl); +#if (CONFIG_SYS_NUM_FMAN == 2) +struct liodn_id_table fman2_liodn_tbl[] = { + SET_FMAN_RX_1G_LIODN(2, 0, 88), + SET_FMAN_RX_1G_LIODN(2, 1, 89), + SET_FMAN_RX_1G_LIODN(2, 2, 90), + SET_FMAN_RX_1G_LIODN(2, 3, 91), + SET_FMAN_RX_1G_LIODN(2, 4, 92), + SET_FMAN_RX_1G_LIODN(2, 5, 93), + SET_FMAN_RX_10G_LIODN(2, 0, 94), + SET_FMAN_RX_10G_LIODN(2, 1, 95), +}; +int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl); +#endif +#endif + +struct liodn_id_table sec_liodn_tbl[] = { + SET_SEC_JR_LIODN_ENTRY(0, 454, 458), + SET_SEC_JR_LIODN_ENTRY(1, 455, 459), + SET_SEC_JR_LIODN_ENTRY(2, 456, 460), + SET_SEC_JR_LIODN_ENTRY(3, 457, 461), + SET_SEC_RTIC_LIODN_ENTRY(a, 453), + SET_SEC_RTIC_LIODN_ENTRY(b, 549), + SET_SEC_RTIC_LIODN_ENTRY(c, 550), + SET_SEC_RTIC_LIODN_ENTRY(d, 551), + SET_SEC_DECO_LIODN_ENTRY(0, 541, 610), + SET_SEC_DECO_LIODN_ENTRY(1, 542, 611), + SET_SEC_DECO_LIODN_ENTRY(2, 543, 612), + SET_SEC_DECO_LIODN_ENTRY(3, 544, 613), + SET_SEC_DECO_LIODN_ENTRY(4, 545, 614), + SET_SEC_DECO_LIODN_ENTRY(5, 546, 615), + SET_SEC_DECO_LIODN_ENTRY(6, 547, 616), + SET_SEC_DECO_LIODN_ENTRY(7, 548, 617), +}; +int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl); + +#ifdef CONFIG_SYS_DPAA_RMAN +struct liodn_id_table rman_liodn_tbl[] = { + /* Set RMan block 0-3 liodn offset */ + SET_RMAN_LIODN(0, 678), + SET_RMAN_LIODN(1, 679), + SET_RMAN_LIODN(2, 680), + SET_RMAN_LIODN(3, 681), +}; +int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl); +#endif + +struct liodn_id_table liodn_bases[] = { +#ifdef CONFIG_SYS_DPAA_DCE + [FSL_HW_PORTAL_DCE] = SET_LIODN_BASE_2(618, 694), +#endif + [FSL_HW_PORTAL_SEC] = SET_LIODN_BASE_2(462, 558), +#ifdef CONFIG_SYS_DPAA_FMAN + [FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973), +#if (CONFIG_SYS_NUM_FMAN == 2) + [FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(1069), +#endif +#endif +#ifdef CONFIG_SYS_DPAA_PME + [FSL_HW_PORTAL_PME] = SET_LIODN_BASE_2(770, 846), +#endif +#ifdef CONFIG_SYS_DPAA_RMAN + [FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922), +#endif +}; diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c new file mode 100644 index 0000000000..102defa560 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c @@ -0,0 +1,237 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_serdes.h> +#include <asm/processor.h> +#include <asm/io.h> +#include "fsl_corenet2_serdes.h" + +struct serdes_config { + u32 protocol; + u8 lanes[SRDS_MAX_LANES]; +}; + +static struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10}}, + {2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}}, + {4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}}, + {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}}, + {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}}, + {38, {NONE, NONE, QSGMII_FM1_B, NONE, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {40, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {46, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {48, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {} +}; +static struct serdes_config serdes2_cfg_tbl[] = { + /* SerDes 2 */ + {1, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC10, XAUI_FM2_MAC10, + XAUI_FM2_MAC10, XAUI_FM2_MAC10}}, + {2, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}}, + {4, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10, + HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}}, + {7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {14, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {23, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {26, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {38, {NONE, NONE, QSGMII_FM2_B, NONE, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, QSGMII_FM1_A, NONE}}, + {56, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM2_MAC10, XFI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {57, {XFI_FM1_MAC9, XFI_FM1_MAC10, + XFI_FM2_MAC10, XFI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, + {} +}; +static struct serdes_config serdes3_cfg_tbl[] = { + /* SerDes 3 */ + {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}}, + {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}}, + {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}}, + {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE}}, + {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}}, + {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}}, + {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2}}, + {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2}}, + {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1}}, + {} +}; +static struct serdes_config serdes4_cfg_tbl[] = { + /* SerDes 4 */ + {2, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3}}, + {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}}, + {6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}}, + {8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}}, + {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA1}}, + {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA1}}, + {14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}}, + {16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}}, + {18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}}, + {} +}; +static struct serdes_config *serdes_cfg_tbl[] = { + serdes1_cfg_tbl, + serdes2_cfg_tbl, + serdes3_cfg_tbl, + serdes4_cfg_tbl, +}; + +enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) +{ + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == cfg) + return ptr->lanes[lane]; + ptr++; + } + return 0; +} + +int is_serdes_prtcl_valid(int serdes, u32 prtcl) +{ + int i; + struct serdes_config *ptr; + + if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) + return 0; + + ptr = serdes_cfg_tbl[serdes]; + while (ptr->protocol) { + if (ptr->protocol == prtcl) + break; + ptr++; + } + + if (!ptr->protocol) + return 0; + + for (i = 0; i < SRDS_MAX_LANES; i++) { + if (ptr->lanes[i] != NONE) + return 1; + } + + return 0; +} diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index 929f6a607e..a548dec9a7 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -249,7 +249,7 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg) { int i; unsigned int tlb_size; - unsigned int wimge = 0; + unsigned int wimge = MAS2_M; unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE; unsigned int max_cam; u64 size, memsize = (u64)memsize_in_meg << 20; diff --git a/arch/powerpc/cpu/mpc85xx/traps.c b/arch/powerpc/cpu/mpc85xx/traps.c index 78007177a1..476ae93594 100644 --- a/arch/powerpc/cpu/mpc85xx/traps.c +++ b/arch/powerpc/cpu/mpc85xx/traps.c @@ -82,8 +82,7 @@ extern void do_bedbug_breakpoint(struct pt_regs *); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -103,7 +102,7 @@ print_backtrace(unsigned long *sp) printf("\n"); } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -131,24 +130,21 @@ void show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Exception in kernel pc %lx signal %d",regs->nip,signr); } -void -CritcalInputException(struct pt_regs *regs) +void CritcalInputException(struct pt_regs *regs) { panic("Critical Input Exception"); } int machinecheck_count = 0; int machinecheck_error = 0; -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; unsigned int mcsr, mcsrr0, mcsrr1, mcar; @@ -220,8 +216,7 @@ MachineCheckException(struct pt_regs *regs) } } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -233,8 +228,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { long esr_val; @@ -257,8 +251,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -PITException(struct pt_regs *regs) +void PITException(struct pt_regs *regs) { /* * Reset PIT interrupt @@ -271,9 +264,7 @@ PITException(struct pt_regs *regs) timer_interrupt(NULL); } - -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -285,8 +276,7 @@ UnknownException(struct pt_regs *regs) _exception(0, regs); } -void -ExtIntException(struct pt_regs *regs) +void ExtIntException(struct pt_regs *regs) { volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR); @@ -305,8 +295,7 @@ ExtIntException(struct pt_regs *regs) print_backtrace((unsigned long *)regs->gpr[1]); } -void -DebugException(struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { printf("Debugger trap at @ %lx\n", regs->nip ); show_regs(regs); @@ -318,8 +307,7 @@ DebugException(struct pt_regs *regs) /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds index 8ba9399169..f7c4a22d29 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds @@ -70,9 +70,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds index 668158f702..46dbaed1e0 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds @@ -53,6 +53,10 @@ SECTIONS } _edata = .; + .u_boot_list : { + #include <u-boot.lst> + } + . = ALIGN(8); __init_begin = .; __init_end = .; diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds index efe34b774d..4a40a1f51b 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds @@ -77,9 +77,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c index 61f5110b7d..2f955fe930 100644 --- a/arch/powerpc/cpu/mpc86xx/fdt.c +++ b/arch/powerpc/cpu/mpc86xx/fdt.c @@ -20,7 +20,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) { #ifdef CONFIG_MP int off; - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); #endif do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, diff --git a/arch/powerpc/cpu/mpc86xx/mp.c b/arch/powerpc/cpu/mpc86xx/mp.c index 30c99ebc56..de705f0ae8 100644 --- a/arch/powerpc/cpu/mpc86xx/mp.c +++ b/arch/powerpc/cpu/mpc86xx/mp.c @@ -90,8 +90,11 @@ int cpu_release(int nr, int argc, char * const argv[]) return 1; } -u32 determine_mp_bootpg(void) +u32 determine_mp_bootpg(unsigned int *pagesize) { + if (pagesize) + *pagesize = 4096; + /* if we have 4G or more of memory, put the boot page at 4Gb-1M */ if ((u64)gd->ram_size > 0xfffff000) return (0xfff00000); @@ -101,7 +104,7 @@ u32 determine_mp_bootpg(void) void cpu_mp_lmb_reserve(struct lmb *lmb) { - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); /* tell u-boot we stole a page */ lmb_reserve(lmb, bootpg, 4096); @@ -115,7 +118,7 @@ void setup_mp(void) { extern ulong __secondary_start_page; ulong fixup = (ulong)&__secondary_start_page; - u32 bootpg = determine_mp_bootpg(); + u32 bootpg = determine_mp_bootpg(NULL); u32 bootpg_va; if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE) { diff --git a/arch/powerpc/cpu/mpc86xx/traps.c b/arch/powerpc/cpu/mpc86xx/traps.c index 406403e512..50069d55f5 100644 --- a/arch/powerpc/cpu/mpc86xx/traps.c +++ b/arch/powerpc/cpu/mpc86xx/traps.c @@ -52,8 +52,7 @@ extern ulong get_effective_memsize(void); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -74,8 +73,7 @@ print_backtrace(unsigned long *sp) printf("\n"); } -void -show_regs(struct pt_regs *regs) +void show_regs(struct pt_regs *regs) { int i; @@ -103,16 +101,14 @@ show_regs(struct pt_regs *regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Exception in kernel pc %lx signal %d", regs->nip, signr); } -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; @@ -158,8 +154,7 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler) (regs)) @@ -170,8 +165,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL; int i, j; @@ -196,8 +190,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -SoftEmuException(struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler) (regs)) @@ -208,8 +201,7 @@ SoftEmuException(struct pt_regs *regs) panic("Software Emulation Exception"); } -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler) (regs)) @@ -226,8 +218,7 @@ UnknownException(struct pt_regs *regs) * If not present, return -1, * otherwise return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { return 0; } diff --git a/arch/powerpc/cpu/mpc86xx/u-boot.lds b/arch/powerpc/cpu/mpc86xx/u-boot.lds index 121e529876..8bfadf28dc 100644 --- a/arch/powerpc/cpu/mpc86xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc86xx/u-boot.lds @@ -64,9 +64,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c index b348a98c58..d7c9090941 100644 --- a/arch/powerpc/cpu/mpc8xx/fec.c +++ b/arch/powerpc/cpu/mpc8xx/fec.c @@ -460,7 +460,7 @@ static void fec_pin_init(int fecidx) #endif /* !CONFIG_RMII */ -#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210) +#elif !defined(CONFIG_ICU862) /* * Configure all of port D for MII. */ diff --git a/arch/powerpc/cpu/mpc8xx/scc.c b/arch/powerpc/cpu/mpc8xx/scc.c index 2c93e24f3c..2ef77b4c14 100644 --- a/arch/powerpc/cpu/mpc8xx/scc.c +++ b/arch/powerpc/cpu/mpc8xx/scc.c @@ -473,20 +473,6 @@ static int scc_init (struct eth_device *dev, bd_t * bis) *((uint *) BCSR1) &= ~BCSR1_ETHEN; #endif /* MPC860ADS */ -#if defined(CONFIG_AMX860) - /* - * Port B is used to control the PHY,MC68160. - */ - immr->im_cpm.cp_pbdir |= - (PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL); - - immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL; - immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL); - - immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN; - immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN; -#endif /* AMX860 */ - #ifdef CONFIG_RPXCLASSIC *((uchar *) BCSR0) &= ~BCSR0_ETHLPBK; *((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX); @@ -542,7 +528,7 @@ static int scc_init (struct eth_device *dev, bd_t * bis) */ #if defined (CONFIG_FADS) udelay (10000); /* wait 10 ms */ -#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC) +#elif defined(CONFIG_RPXCLASSIC) udelay (100000); /* wait 100 ms */ #endif diff --git a/arch/powerpc/cpu/mpc8xx/traps.c b/arch/powerpc/cpu/mpc8xx/traps.c index 343dced31f..f0ab78daf9 100644 --- a/arch/powerpc/cpu/mpc8xx/traps.c +++ b/arch/powerpc/cpu/mpc8xx/traps.c @@ -52,8 +52,7 @@ extern unsigned long search_exception_table(unsigned long); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -73,7 +72,7 @@ print_backtrace(unsigned long *sp) printf("\n"); } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -101,16 +100,14 @@ void show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Exception in kernel pc %lx signal %d",regs->nip,signr); } -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup; @@ -153,8 +150,7 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -165,8 +161,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -177,8 +172,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -SoftEmuException(struct pt_regs *regs) +void SoftEmuException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -190,8 +184,7 @@ SoftEmuException(struct pt_regs *regs) } -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -202,8 +195,7 @@ UnknownException(struct pt_regs *regs) _exception(0, regs); } -void -DebugException(struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { printf("Debugger trap at @ %lx\n", regs->nip ); show_regs(regs); @@ -215,8 +207,7 @@ DebugException(struct pt_regs *regs) /* Probe an address by reading. If not present, return -1, otherwise * return 0. */ -int -addr_probe(uint *addr) +int addr_probe(uint *addr) { #if 0 int retval; diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 78a8f926b3..e8613be393 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -34,7 +34,7 @@ DECLARE_GLOBAL_DATA_PTR; -struct cpu_type cpu_type_list [] = { +static struct cpu_type cpu_type_list[] = { #if defined(CONFIG_MPC85xx) CPU_TYPE_ENTRY(8533, 8533, 1), CPU_TYPE_ENTRY(8535, 8535, 1), @@ -73,6 +73,17 @@ struct cpu_type cpu_type_list [] = { CPU_TYPE_ENTRY(P4080, P4080, 8), CPU_TYPE_ENTRY(P5010, P5010, 1), CPU_TYPE_ENTRY(P5020, P5020, 2), + CPU_TYPE_ENTRY(P5021, P5021, 2), + CPU_TYPE_ENTRY(P5040, P5040, 4), + CPU_TYPE_ENTRY(T4240, T4240, 0), + CPU_TYPE_ENTRY(T4120, T4120, 0), + CPU_TYPE_ENTRY(B4860, B4860, 0), + CPU_TYPE_ENTRY(G4860, G4860, 0), + CPU_TYPE_ENTRY(G4060, G4060, 0), + CPU_TYPE_ENTRY(B4440, B4440, 0), + CPU_TYPE_ENTRY(G4440, G4440, 0), + CPU_TYPE_ENTRY(B4420, B4420, 0), + CPU_TYPE_ENTRY(B4220, B4220, 0), CPU_TYPE_ENTRY(BSC9130, 9130, 1), CPU_TYPE_ENTRY(BSC9131, 9131, 1), #elif defined(CONFIG_MPC86xx) @@ -114,7 +125,7 @@ u32 compute_ppc_cpumask(void) #define compute_ppc_cpumask() 1 #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ -struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 0); +static struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 0); struct cpu_type *identify_cpu(u32 ver) { @@ -132,7 +143,7 @@ struct cpu_type *identify_cpu(u32 ver) /* * Return a 32-bit mask indicating which cores are present on this SOC. */ -u32 cpu_mask() +u32 cpu_mask(void) { ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR; struct cpu_type *cpu = gd->cpu; @@ -151,7 +162,8 @@ u32 cpu_mask() /* * Return the number of cores on this SOC. */ -int cpu_numcores() { +int cpu_numcores(void) +{ struct cpu_type *cpu = gd->cpu; /* diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c index 2592873c9f..088cc0e855 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c @@ -28,7 +28,7 @@ #error "Undefined _DDR_ADDR" #endif -u32 fsl_ddr_get_version(void) +static u32 fsl_ddr_get_version(void) { ccsr_ddr_t *ddr; u32 ver_major_minor_errata; @@ -229,6 +229,26 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr) /* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */ #if !defined(CONFIG_FSL_DDR1) +static inline int avoid_odt_overlap(const dimm_params_t *dimm_params) +{ +#if CONFIG_DIMM_SLOTS_PER_CTLR == 1 + if (dimm_params[0].n_ranks == 4) + return 1; +#endif + +#if CONFIG_DIMM_SLOTS_PER_CTLR == 2 + if ((dimm_params[0].n_ranks == 2) && + (dimm_params[1].n_ranks == 2)) + return 1; + +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + if (dimm_params[0].n_ranks == 4) + return 1; +#endif +#endif + return 0; +} + /* * DDR SDRAM Timing Configuration 0 (TIMING_CFG_0) * @@ -236,7 +256,8 @@ static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr) * dreams up non-zero default values to be backwards compatible. */ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, - const memctl_options_t *popts) + const memctl_options_t *popts, + const dimm_params_t *dimm_params) { unsigned char trwt_mclk = 0; /* Read-to-write turnaround */ unsigned char twrt_mclk = 0; /* Write-to-read turnaround */ @@ -266,7 +287,18 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr, unsigned int data_rate = get_ddr_freq(0); tmrd_mclk = 4; /* set the turnaround time */ - trwt_mclk = 1; + + /* + * for single quad-rank DIMM and two dual-rank DIMMs + * to avoid ODT overlap + */ + if (avoid_odt_overlap(dimm_params)) { + twwt_mclk = 2; + trrt_mclk = 1; + } + /* for faster clock, need more time for data setup */ + trwt_mclk = (data_rate/1000000 > 1800) ? 2 : 1; + if ((data_rate/1000000 > 1150) || (popts->memctl_interleaving)) twrt_mclk = 1; @@ -451,8 +483,8 @@ static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr, | ((caslat_ctrl & 0xF) << 16) | ((refrec_ctrl & 0xF) << 12) | ((wrrec_mclk & 0x0F) << 8) - | ((acttoact_mclk & 0x07) << 4) - | ((wrtord_mclk & 0x07) << 0) + | ((acttoact_mclk & 0x0F) << 4) + | ((wrtord_mclk & 0x0F) << 0) ); debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1); } @@ -659,6 +691,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, unsigned int dqs_cfg; /* DQS configuration */ unsigned int odt_cfg = 0; /* ODT configuration */ unsigned int num_pr; /* Number of posted refreshes */ + unsigned int slow = 0; /* DDR will be run less than 1250 */ unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */ unsigned int ap_en; /* Address Parity Enable */ unsigned int d_init; /* DRAM data initialization */ @@ -692,6 +725,10 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, obc_cfg = 0; #endif +#if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7) + slow = get_ddr_freq(0) < 1249000000; +#endif + if (popts->registered_dimm_en) { rcw_en = 1; ap_en = popts->ap_en; @@ -720,6 +757,7 @@ static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr, | ((dqs_cfg & 0x3) << 26) | ((odt_cfg & 0x3) << 21) | ((num_pr & 0xf) << 12) + | ((slow & 1) << 11) | (qd_en << 9) | (unq_mrs_en << 8) | ((obc_cfg & 0x1) << 6) @@ -1347,6 +1385,11 @@ static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en, | ((wrlvl_start & 0x1F) << 0) ); debug("FSLDDR: wrlvl_cntl = 0x%08x\n", ddr->ddr_wrlvl_cntl); + ddr->ddr_wrlvl_cntl_2 = popts->wrlvl_ctl_2; + debug("FSLDDR: wrlvl_cntl_2 = 0x%08x\n", ddr->ddr_wrlvl_cntl_2); + ddr->ddr_wrlvl_cntl_3 = popts->wrlvl_ctl_3; + debug("FSLDDR: wrlvl_cntl_3 = 0x%08x\n", ddr->ddr_wrlvl_cntl_3); + } /* DDR Self Refresh Counter (DDR_SR_CNTR) */ @@ -1370,6 +1413,12 @@ static void set_ddr_cdr1(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts) debug("FSLDDR: ddr_cdr1 = 0x%08x\n", ddr->ddr_cdr1); } +static void set_ddr_cdr2(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts) +{ + ddr->ddr_cdr2 = popts->ddr_cdr2; + debug("FSLDDR: ddr_cdr2 = 0x%08x\n", ddr->ddr_cdr2); +} + unsigned int check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) { @@ -1466,7 +1515,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, break; } sa = common_dimm->base_address; - ea = common_dimm->total_mem - 1; + ea = sa + common_dimm->total_mem - 1; } else if (!popts->memctl_interleaving) { /* * If memory interleaving between controllers is NOT @@ -1480,7 +1529,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { case FSL_DDR_CS0_CS1_CS2_CS3: sa = common_dimm->base_address; - ea = common_dimm->total_mem - 1; + ea = sa + common_dimm->total_mem - 1; break; case FSL_DDR_CS0_CS1_AND_CS2_CS3: if ((i >= 2) && (dimm_number == 0)) { @@ -1537,17 +1586,19 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, sa >>= 24; ea >>= 24; - ddr->cs[i].bnds = (0 - | ((sa & 0xFFF) << 16) /* starting address MSB */ - | ((ea & 0xFFF) << 0) /* ending address MSB */ - ); + if (cs_en) { + ddr->cs[i].bnds = (0 + | ((sa & 0xFFF) << 16)/* starting address MSB */ + | ((ea & 0xFFF) << 0) /* ending address MSB */ + ); + } else { + debug("FSLDDR: setting bnds to 0 for inactive CS\n"); + ddr->cs[i].bnds = 0; + } debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds); - if (cs_en) { - set_csn_config(dimm_number, i, ddr, popts, dimm_params); - set_csn_config_2(i, ddr); - } else - debug("CS%d is disabled.\n", i); + set_csn_config(dimm_number, i, ddr, popts, dimm_params); + set_csn_config_2(i, ddr); } /* @@ -1560,7 +1611,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, set_ddr_eor(ddr, popts); #if !defined(CONFIG_FSL_DDR1) - set_timing_cfg_0(ddr, popts); + set_timing_cfg_0(ddr, popts, dimm_params); #endif set_timing_cfg_3(ddr, popts, common_dimm, cas_latency); @@ -1569,6 +1620,7 @@ compute_fsl_memctl_config_regs(const memctl_options_t *popts, cas_latency, additive_latency); set_ddr_cdr1(ddr, popts); + set_ddr_cdr2(ddr, popts); set_ddr_sdram_cfg(ddr, popts, common_dimm); ip_rev = fsl_ddr_get_version(); if (ip_rev > 0x40400) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c index f59d1051bf..cb71f94ba1 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c @@ -452,6 +452,8 @@ static void fsl_ddr_options_edit(fsl_ddr_info_t *pinfo, CTRL_OPTIONS(rcw_override), CTRL_OPTIONS(rcw_1), CTRL_OPTIONS(rcw_2), + CTRL_OPTIONS(ddr_cdr1), + CTRL_OPTIONS(ddr_cdr2), CTRL_OPTIONS(tCKE_clock_pulse_width_ps), CTRL_OPTIONS(tFAW_window_four_activates_ps), CTRL_OPTIONS(trwt_override), @@ -518,6 +520,8 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) CFG_REGS(timing_cfg_5), CFG_REGS(ddr_zq_cntl), CFG_REGS(ddr_wrlvl_cntl), + CFG_REGS(ddr_wrlvl_cntl_2), + CFG_REGS(ddr_wrlvl_cntl_3), CFG_REGS(ddr_sr_cntr), CFG_REGS(ddr_sdram_rcw_1), CFG_REGS(ddr_sdram_rcw_2), @@ -525,6 +529,7 @@ static void print_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr) CFG_REGS(ddr_cdr2), CFG_REGS(err_disable), CFG_REGS(err_int_en), + CFG_REGS(ddr_eor), }; static const unsigned int n_opts = ARRAY_SIZE(options); @@ -584,6 +589,8 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo, CFG_REGS(timing_cfg_5), CFG_REGS(ddr_zq_cntl), CFG_REGS(ddr_wrlvl_cntl), + CFG_REGS(ddr_wrlvl_cntl_2), + CFG_REGS(ddr_wrlvl_cntl_3), CFG_REGS(ddr_sr_cntr), CFG_REGS(ddr_sdram_rcw_1), CFG_REGS(ddr_sdram_rcw_2), @@ -593,7 +600,7 @@ static void fsl_ddr_regs_edit(fsl_ddr_info_t *pinfo, CFG_REGS(err_int_en), CFG_REGS(ddr_sdram_rcw_2), CFG_REGS(ddr_sdram_rcw_2), - + CFG_REGS(ddr_eor), }; static const unsigned int n_opts = ARRAY_SIZE(options); @@ -689,6 +696,8 @@ static void print_memctl_options(const memctl_options_t *popts) CTRL_OPTIONS(rcw_override), CTRL_OPTIONS(rcw_1), CTRL_OPTIONS(rcw_2), + CTRL_OPTIONS_HEX(ddr_cdr1), + CTRL_OPTIONS_HEX(ddr_cdr2), CTRL_OPTIONS(tCKE_clock_pulse_width_ps), CTRL_OPTIONS(tFAW_window_four_activates_ps), CTRL_OPTIONS(trwt_override), @@ -1597,6 +1606,7 @@ unsigned long long fsl_ddr_interactive(fsl_ddr_info_t *pinfo) * doesn't return */ do_reset(NULL, 0, 0, NULL); + printf("Reset didn't work\n"); } if (strcmp(argv[0], "recompute") == 0) { diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c index 03a784cd47..9adde31010 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c @@ -11,7 +11,8 @@ #include "ddr.h" -unsigned int +#if defined(CONFIG_FSL_DDR3) +static unsigned int compute_cas_latency_ddr3(const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, unsigned int number_of_dimms) @@ -65,6 +66,7 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params, return 0; } +#endif /* * compute_lowest_common_dimm_parameters() @@ -76,7 +78,7 @@ compute_cas_latency_ddr3(const dimm_params_t *dimm_params, unsigned int compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, common_timing_params_t *outpdimm, - unsigned int number_of_dimms) + const unsigned int number_of_dimms) { unsigned int i, j; @@ -126,13 +128,20 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, temp1++; continue; } + + /* + * check if quad-rank DIMM is plugged if + * CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined + * Only the board with proper design is capable + */ +#ifndef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE if (dimm_params[i].n_ranks == 4 && \ CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) { printf("Found Quad-rank DIMM, not able to support."); temp1++; continue; } - +#endif /* * Find minimum tCKmax_ps to find fastest slow speed, * i.e., this is the slowest the whole system can go. @@ -236,11 +245,14 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params, if (outpdimm->all_DIMMs_registered) for (j = 0; j < 16; j++) { outpdimm->rcw[j] = dimm_params[0].rcw[j]; - for (i = 1; i < number_of_dimms; i++) + for (i = 1; i < number_of_dimms; i++) { + if (!dimm_params[i].n_ranks) + continue; if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) { temp1 = 1; break; } + } } if (temp1 != 0) diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index b47268c20e..d6b73c7af1 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -77,7 +77,19 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) sizeof(generic_spd_eeprom_t)); if (ret) { - printf("DDR: failed to read SPD from address %u\n", i2c_address); + if (i2c_address == +#ifdef SPD_EEPROM_ADDRESS + SPD_EEPROM_ADDRESS +#elif defined(SPD_EEPROM_ADDRESS1) + SPD_EEPROM_ADDRESS1 +#endif + ) { + printf("DDR: failed to read SPD from address %u\n", + i2c_address); + } else { + debug("DDR: failed to read SPD from address %u\n", + i2c_address); + } memset(spd, 0, sizeof(generic_spd_eeprom_t)); } } @@ -526,6 +538,17 @@ phys_size_t fsl_ddr_sdram(void) #endif total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0); + /* setup 3-way interleaving before enabling DDRC */ + switch (info.memctl_opts[0].memctl_interleaving_mode) { + case FSL_DDR_3WAY_1KB_INTERLEAVING: + case FSL_DDR_3WAY_4KB_INTERLEAVING: + case FSL_DDR_3WAY_8KB_INTERLEAVING: + fsl_ddr_set_intl3r(info.memctl_opts[0].memctl_interleaving_mode); + break; + default: + break; + } + /* Program configuration registers. */ for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { debug("Programming controller %u\n", i); @@ -561,7 +584,6 @@ phys_size_t fsl_ddr_sdram(void) case FSL_DDR_3WAY_8KB_INTERLEAVING: law_memctl = LAW_TRGT_IF_DDR_INTLV_123; if (i == 0) { - fsl_ddr_set_intl3r(info.memctl_opts[i].memctl_interleaving_mode); fsl_ddr_set_lawbar(&info.common_timing_params[i], law_memctl, i); } diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c index 13e4825274..2f13b8fd93 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c @@ -474,6 +474,34 @@ static const struct dynamic_odt odt_unknown[4] = { } }; #endif + +/* + * Automatically seleect bank interleaving mode based on DIMMs + * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null. + * This function only deal with one or two slots per controller. + */ +static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm) +{ +#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1) + if (pdimm[0].n_ranks == 4) + return FSL_DDR_CS0_CS1_CS2_CS3; + else if (pdimm[0].n_ranks == 2) + return FSL_DDR_CS0_CS1; +#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + if (pdimm[0].n_ranks == 4) + return FSL_DDR_CS0_CS1_CS2_CS3; +#endif + if (pdimm[0].n_ranks == 2) { + if (pdimm[1].n_ranks == 2) + return FSL_DDR_CS0_CS1_CS2_CS3; + else + return FSL_DDR_CS0_CS1; + } +#endif + return 0; +} + unsigned int populate_memctl_options(int all_DIMMs_registered, memctl_options_t *popts, dimm_params_t *pdimm, @@ -510,6 +538,14 @@ unsigned int populate_memctl_options(int all_DIMMs_registered, } } else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) { switch (pdimm[0].n_ranks) { +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + case 4: + pdodt = single_Q; + if (pdimm[1].n_ranks) + printf("Error: Quad- and Dual-rank DIMMs " + "cannot be used together\n"); + break; +#endif case 2: switch (pdimm[1].n_ranks) { case 2: @@ -900,6 +936,9 @@ done: else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv", "cs0_cs1_cs2_cs3", buf)) popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3; + else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv", + "auto", buf)) + popts->ba_intlv_ctl = auto_bank_intlv(pdimm); else printf("hwconfig has unrecognized parameter for bank_intlv.\n"); switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) { @@ -912,6 +951,10 @@ done: "interleaving disabled!\n", ctrl_num); } #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2) +#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + if (pdimm[0].n_ranks == 4) + break; +#endif if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) { popts->ba_intlv_ctl = 0; printf("Not enough bank(chip-select) for " @@ -1063,7 +1106,7 @@ void check_interleaving_options(fsl_ddr_info_t *pinfo) break; } debug("%d of %d controllers are interleaving.\n", j, k); - if (j != k) { + if (j && (j != k)) { for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) pinfo->memctl_opts[i].memctl_interleaving = 0; printf("Not all controllers have compatible " diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c index 664ad09298..940ffff773 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c @@ -121,6 +121,16 @@ void fsl_ddr_set_intl3r(const unsigned int granule_size) #endif } +u32 fsl_ddr_get_intl3r(void) +{ + u32 val = 0; +#ifdef CONFIG_E6500 + u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004); + val = *mcintl3r; +#endif + return val; +} + void board_add_ram_info(int use_default) { #if defined(CONFIG_MPC83xx) @@ -140,6 +150,18 @@ void board_add_ram_info(int use_default) uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg); int cas_lat; +#if CONFIG_NUM_DDR_CONTROLLERS >= 2 + if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { + ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR; + sdram_cfg = in_be32(&ddr->sdram_cfg); + } +#endif +#if CONFIG_NUM_DDR_CONTROLLERS >= 3 + if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) { + ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR; + sdram_cfg = in_be32(&ddr->sdram_cfg); + } +#endif puts(" (DDR"); switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >> SDRAM_CFG_SDRAM_TYPE_SHIFT) { diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 32ab050962..68db8e2448 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -139,6 +139,8 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) const char *phys[] = { "ulpi", "utmi" }; const char *mode = NULL; const char *phy_type = NULL; + const char *dr_mode_type = NULL; + const char *dr_phy_type = NULL; char usb1_defined = 0; int usb_mode_off = -1; int usb_phy_off = -1; @@ -156,6 +158,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) break; } } + for (j = 0; j < ARRAY_SIZE(phys); j++) { if (hwconfig_subarg_cmp(str, "phy_type", phys[j])) { @@ -163,31 +166,46 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) break; } } - if (mode_idx >= 0) { - usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, - modes[mode_idx], NULL, usb_mode_off); - if (usb_mode_off < 0) - return; - } - if (phy_idx >= 0) { - usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, - NULL, phys[phy_idx], usb_phy_off); - if (usb_phy_off < 0) - return; - } + + dr_mode_type = modes[mode_idx]; + dr_phy_type = phys[phy_idx]; + + /* use usb_dr_mode and usb_phy_type if + usb1_defined = 0; these variables are to + be deprecated */ if (!strcmp(str, "usb1")) usb1_defined = 1; - if (mode_idx < 0 && phy_idx < 0) + + if (mode_idx < 0 && phy_idx < 0) { printf("WARNING: invalid phy or mode\n"); + return; + } } + + usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, + dr_mode_type, NULL, usb_mode_off); + + if (usb_mode_off < 0) + return; + + usb_phy_off = fdt_fixup_usb_mode_phy_type(blob, + NULL, dr_phy_type, usb_phy_off); + + if (usb_phy_off < 0) + return; } + if (!usb1_defined) { int usb_off = -1; mode = getenv("usb_dr_mode"); phy_type = getenv("usb_phy_type"); - if (!mode && !phy_type) - return; - fdt_fixup_usb_mode_phy_type(blob, mode, phy_type, usb_off); + if (mode || phy_type) { + printf("WARNING: usb_dr_mode and usb_phy_type " + "are to be deprecated soon. Use " + "hwconfig to set these values instead!!\n"); + fdt_fixup_usb_mode_phy_type(blob, mode, + phy_type, usb_off); + } } } #endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */ diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c index 023ac9ab30..c1fe5790a3 100644 --- a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c +++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c @@ -11,7 +11,7 @@ #ifdef CONFIG_MPC85xx /* Boards should provide their own version of this if they use lbc sdram */ -void __lbc_sdram_init(void) +static void __lbc_sdram_init(void) { /* Do nothing */ } diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c index 0cb65b32e4..6e6f7dcc3f 100644 --- a/arch/powerpc/cpu/mpc8xxx/srio.c +++ b/arch/powerpc/cpu/mpc8xxx/srio.c @@ -22,7 +22,9 @@ #include <asm/fsl_law.h> #include <asm/fsl_serdes.h> #include <asm/fsl_srio.h> +#include <asm/errno.h> +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define SRIO_PORT_ACCEPT_ALL 0x10000001 #define SRIO_IB_ATMU_AR 0x80f55000 #define SRIO_OB_ATMU_AR_MAINT 0x80077000 @@ -31,10 +33,16 @@ #define SRIO_MAINT_WIN_SIZE 0x1000000 /* 16M */ #define SRIO_RW_WIN_SIZE 0x100000 /* 1M */ #define SRIO_LCSBA1CSR 0x60000000 +#endif #if defined(CONFIG_FSL_CORENET) +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR3_SRIO1 + #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR3_SRIO2 +#else #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1 #define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR_SRIO2 +#endif #define _DEVDISR_RMU FSL_CORENET_DEVDISR_RMU #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR #elif defined(CONFIG_MPC85xx) @@ -52,16 +60,206 @@ #error "No defines for DEVDISR_SRIO" #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 +/* + * Erratum A-004034 + * Affects: SRIO + * Description: During port initialization, the SRIO port performs + * lane synchronization (detecting valid symbols on a lane) and + * lane alignment (coordinating multiple lanes to receive valid data + * across lanes). Internal errors in lane synchronization and lane + * alignment may cause failure to achieve link initialization at + * the configured port width. + * An SRIO port configured as a 4x port may see one of these scenarios: + * 1. One or more lanes fails to achieve lane synchronization. Depending + * on which lanes fail, this may result in downtraining from 4x to 1x + * on lane 0, 4x to 1x on lane R (redundant lane). + * 2. The link may fail to achieve lane alignment as a 4x, even though + * all 4 lanes achieve lane synchronization, and downtrain to a 1x. + * An SRIO port configured as a 1x port may fail to complete port + * initialization (PnESCSR[PU] never deasserts) because of scenario 1. + * Impact: SRIO port may downtrain to 1x, or may fail to complete + * link initialization. Once a port completes link initialization + * successfully, it will operate normally. + */ +static int srio_erratum_a004034(u8 port) +{ + serdes_corenet_t *srds_regs; + u32 conf_lane; + u32 init_lane; + int idx, first, last; + u32 i; + unsigned long long end_tick; + struct ccsr_rio *srio_regs = (void *)CONFIG_SYS_FSL_SRIO_ADDR; + + srds_regs = (void *)(CONFIG_SYS_FSL_CORENET_SERDES_ADDR); + conf_lane = (in_be32((void *)&srds_regs->srdspccr0) + >> (12 - port * 4)) & 0x3; + init_lane = (in_be32((void *)&srio_regs->lp_serial + .port[port].pccsr) >> 27) & 0x7; + + /* + * Start a counter set to ~2 ms after the SERDES reset is + * complete (SERDES SRDSBnRSTCTL[RST_DONE]=1 for n + * corresponding to the SERDES bank/PLL for the SRIO port). + */ + if (in_be32((void *)&srds_regs->bank[0].rstctl) + & SRDS_RSTCTL_RSTDONE) { + /* + * Poll the port uninitialized status (SRIO PnESCSR[PO]) until + * PO=1 or the counter expires. If the counter expires, the + * port has failed initialization: go to recover steps. If PO=1 + * and the desired port width is 1x, go to normal steps. If + * PO = 1 and the desired port width is 4x, go to recover steps. + */ + end_tick = usec2ticks(2000) + get_ticks(); + do { + if (in_be32((void *)&srio_regs->lp_serial + .port[port].pescsr) & 0x2) { + if (conf_lane == 0x1) + goto host_ok; + else { + if (init_lane == 0x2) + goto host_ok; + else + break; + } + } + } while (end_tick > get_ticks()); + + /* recover at most 3 times */ + for (i = 0; i < 3; i++) { + /* Set SRIO PnCCSR[PD]=1 */ + setbits_be32((void *)&srio_regs->lp_serial + .port[port].pccsr, + 0x800000); + /* + * Set SRIO PnPCR[OBDEN] on the host to + * enable the discarding of any pending packets. + */ + setbits_be32((void *)&srio_regs->impl.port[port].pcr, + 0x04); + /* Wait 50 us */ + udelay(50); + /* Run sync command */ + isync(); + + if (port) + first = serdes_get_first_lane(SRIO2); + else + first = serdes_get_first_lane(SRIO1); + if (unlikely(first < 0)) + return -ENODEV; + if (conf_lane == 0x1) + last = first; + else + last = first + 3; + /* + * Set SERDES BnGCRm0[RRST]=0 for each SRIO + * bank n and lane m. + */ + for (idx = first; idx <= last; idx++) + clrbits_be32(&srds_regs->lane[idx].gcr0, + SRDS_GCR0_RRST); + /* + * Read SERDES BnGCRm0 for each SRIO + * bank n and lane m + */ + for (idx = first; idx <= last; idx++) + in_be32(&srds_regs->lane[idx].gcr0); + /* Run sync command */ + isync(); + /* Wait >= 100 ns */ + udelay(1); + /* + * Set SERDES BnGCRm0[RRST]=1 for each SRIO + * bank n and lane m. + */ + for (idx = first; idx <= last; idx++) + setbits_be32(&srds_regs->lane[idx].gcr0, + SRDS_GCR0_RRST); + /* + * Read SERDES BnGCRm0 for each SRIO + * bank n and lane m + */ + for (idx = first; idx <= last; idx++) + in_be32(&srds_regs->lane[idx].gcr0); + /* Run sync command */ + isync(); + /* Wait >= 300 ns */ + udelay(1); + + /* Write 1 to clear all bits in SRIO PnSLCSR */ + out_be32((void *)&srio_regs->impl.port[port].slcsr, + 0xffffffff); + /* Clear SRIO PnPCR[OBDEN] on the host */ + clrbits_be32((void *)&srio_regs->impl.port[port].pcr, + 0x04); + /* Set SRIO PnCCSR[PD]=0 */ + clrbits_be32((void *)&srio_regs->lp_serial + .port[port].pccsr, + 0x800000); + /* Wait >= 24 ms */ + udelay(24000); + /* Poll the state of the port again */ + init_lane = + (in_be32((void *)&srio_regs->lp_serial + .port[port].pccsr) >> 27) & 0x7; + if (in_be32((void *)&srio_regs->lp_serial + .port[port].pescsr) & 0x2) { + if (conf_lane == 0x1) + goto host_ok; + else { + if (init_lane == 0x2) + goto host_ok; + } + } + if (i == 2) + return -ENODEV; + } + } else + return -ENODEV; + +host_ok: + /* Poll PnESCSR[OES] on the host until it is clear */ + end_tick = usec2ticks(1000000) + get_ticks(); + do { + if (!(in_be32((void *)&srio_regs->lp_serial.port[port].pescsr) + & 0x10000)) { + out_be32(((void *)&srio_regs->lp_serial + .port[port].pescsr), 0xffffffff); + out_be32(((void *)&srio_regs->phys_err + .port[port].edcsr), 0); + out_be32(((void *)&srio_regs->logical_err.ltledcsr), 0); + return 0; + } + } while (end_tick > get_ticks()); + + return -ENODEV; +} +#endif + void srio_init(void) { ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR; int srio1_used = 0, srio2_used = 0; + u32 *devdisr; +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + devdisr = &gur->devdisr3; +#else + devdisr = &gur->devdisr; +#endif if (is_serdes_configured(SRIO1)) { set_next_law(CONFIG_SYS_SRIO1_MEM_PHYS, law_size_bits(CONFIG_SYS_SRIO1_MEM_SIZE), LAW_TRGT_IF_RIO_1); srio1_used = 1; +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + if (srio_erratum_a004034(0) < 0) + printf("SRIO1: enabled but port error\n"); + else +#endif printf("SRIO1: enabled\n"); } else { printf("SRIO1: disabled\n"); @@ -73,7 +271,13 @@ void srio_init(void) law_size_bits(CONFIG_SYS_SRIO2_MEM_SIZE), LAW_TRGT_IF_RIO_2); srio2_used = 1; +#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + if (srio_erratum_a004034(1) < 0) + printf("SRIO2: enabled but port error\n"); + else +#endif printf("SRIO2: enabled\n"); + } else { printf("SRIO2: disabled\n"); } @@ -82,20 +286,20 @@ void srio_init(void) #ifdef CONFIG_FSL_CORENET /* On FSL_CORENET devices we can disable individual ports */ if (!srio1_used) - setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1); + setbits_be32(devdisr, _DEVDISR_SRIO1); if (!srio2_used) - setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2); + setbits_be32(devdisr, _DEVDISR_SRIO2); #endif /* neither port is used - disable everything */ if (!srio1_used && !srio2_used) { - setbits_be32(&gur->devdisr, _DEVDISR_SRIO1); - setbits_be32(&gur->devdisr, _DEVDISR_SRIO2); - setbits_be32(&gur->devdisr, _DEVDISR_RMU); + setbits_be32(devdisr, _DEVDISR_SRIO1); + setbits_be32(devdisr, _DEVDISR_SRIO2); + setbits_be32(devdisr, _DEVDISR_RMU); } } -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER void srio_boot_master(int port) { struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR; diff --git a/arch/powerpc/cpu/ppc4xx/traps.c b/arch/powerpc/cpu/ppc4xx/traps.c index 9baa7a16d1..dae19cba58 100644 --- a/arch/powerpc/cpu/ppc4xx/traps.c +++ b/arch/powerpc/cpu/ppc4xx/traps.c @@ -74,8 +74,7 @@ extern void do_bedbug_breakpoint(struct pt_regs *); * Trap & Exception support */ -void -print_backtrace(unsigned long *sp) +static void print_backtrace(unsigned long *sp) { int cnt = 0; unsigned long i; @@ -95,7 +94,7 @@ print_backtrace(unsigned long *sp) printf("\n"); } -void show_regs(struct pt_regs * regs) +void show_regs(struct pt_regs *regs) { int i; @@ -121,16 +120,14 @@ void show_regs(struct pt_regs * regs) } -void -_exception(int signr, struct pt_regs *regs) +static void _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("Exception"); } -void -MachineCheckException(struct pt_regs *regs) +void MachineCheckException(struct pt_regs *regs) { unsigned long fixup, val; #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) @@ -312,8 +309,7 @@ MachineCheckException(struct pt_regs *regs) panic("machine check"); } -void -AlignmentException(struct pt_regs *regs) +void AlignmentException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -325,8 +321,7 @@ AlignmentException(struct pt_regs *regs) panic("Alignment Exception"); } -void -ProgramCheckException(struct pt_regs *regs) +void ProgramCheckException(struct pt_regs *regs) { long esr_val; @@ -349,8 +344,7 @@ ProgramCheckException(struct pt_regs *regs) panic("Program Check Exception"); } -void -DecrementerPITException(struct pt_regs *regs) +void DecrementerPITException(struct pt_regs *regs) { /* * Reset PIT interrupt @@ -364,8 +358,7 @@ DecrementerPITException(struct pt_regs *regs) } -void -UnknownException(struct pt_regs *regs) +void UnknownException(struct pt_regs *regs) { #if defined(CONFIG_CMD_KGDB) if (debugger_exception_handler && (*debugger_exception_handler)(regs)) @@ -377,8 +370,7 @@ UnknownException(struct pt_regs *regs) _exception(0, regs); } -void -DebugException(struct pt_regs *regs) +void DebugException(struct pt_regs *regs) { printf("Debugger trap at @ %lx\n", regs->nip ); show_regs(regs); diff --git a/arch/powerpc/cpu/ppc4xx/u-boot.lds b/arch/powerpc/cpu/ppc4xx/u-boot.lds index 2466b79594..a96ddd5577 100644 --- a/arch/powerpc/cpu/ppc4xx/u-boot.lds +++ b/arch/powerpc/cpu/ppc4xx/u-boot.lds @@ -78,9 +78,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index aa27741a92..03baaee1b7 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -27,6 +27,8 @@ #error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file." #endif +#define FSL_DDR_VER_4_7 47 + /* Number of TLB CAM entries we have on FSL Book-E chips */ #if defined(CONFIG_E500MC) #define CONFIG_SYS_NUM_TLBCAMS 64 @@ -311,6 +313,7 @@ #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 #elif defined(CONFIG_PPC_P2041) /* also supports P2040 */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -331,6 +334,7 @@ #define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -338,8 +342,10 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 +#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #elif defined(CONFIG_PPC_P3041) +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 #define CONFIG_MAX_CPUS 4 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -360,6 +366,7 @@ #define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -367,8 +374,10 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 +#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #elif defined(CONFIG_PPC_P4080) /* also supports P4040 */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 #define CONFIG_MAX_CPUS 8 #define CONFIG_SYS_FSL_NUM_CC_PLLS 4 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -389,7 +398,7 @@ #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_ESDHC135 -#define CONFIG_SYS_FSL_ERRATUM_ESDHC136 +#define CONFIG_SYS_FSL_ERRATUM_ESDHC13 #define CONFIG_SYS_P4080_ERRATUM_CPU22 #define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011 #define CONFIG_SYS_P4080_ERRATUM_SERDES8 @@ -398,6 +407,7 @@ #define CONFIG_SYS_P4080_ERRATUM_SERDES_A005 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -406,8 +416,11 @@ #define CONFIG_SYS_FSL_ERRATUM_A004510 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x20 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000 +#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */ +#define CONFIG_SYS_PPC64 /* 64-bit core */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 #define CONFIG_MAX_CPUS 2 #define CONFIG_SYS_FSL_NUM_CC_PLLS 2 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -426,12 +439,43 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #define CONFIG_SYS_FSL_ERRATUM_A004510 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xc0000000 +#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034 + +#elif defined(CONFIG_PPC_P5040) +#define CONFIG_SYS_FSL_QORIQ_CHASSIS1 +#define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 3 +#define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 2 +#define CONFIG_SYS_NUM_FM1_DTSEC 5 +#define CONFIG_SYS_NUM_FM1_10GEC 1 +#define CONFIG_SYS_NUM_FM2_DTSEC 5 +#define CONFIG_SYS_NUM_FM2_10GEC 1 +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_FM_MURAM_SIZE 0x28000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY +#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_USB138 +#define CONFIG_SYS_FSL_ERRATUM_DDR_A003 +#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_ERRATUM_A004699 +#define CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC +#define CONFIG_SYS_FSL_ERRATUM_A004510 +#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10 +#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000 #elif defined(CONFIG_BSC9131) #define CONFIG_MAX_CPUS 1 @@ -445,6 +489,63 @@ #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#elif defined(CONFIG_PPC_T4240) +#define CONFIG_SYS_PPC64 /* 64-bit core */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ +#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ +#define CONFIG_MAX_CPUS 12 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 5 +#define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SRDS_3 +#define CONFIG_SYS_FSL_SRDS_4 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 2 +#define CONFIG_SYS_NUM_FM1_DTSEC 8 +#define CONFIG_SYS_NUM_FM1_10GEC 2 +#define CONFIG_SYS_NUM_FM2_DTSEC 8 +#define CONFIG_SYS_NUM_FM2_10GEC 2 +#define CONFIG_NUM_DDR_CONTROLLERS 3 +#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 +#define CONFIG_SYS_FMAN_V3 +#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v3.0" +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY +#define CONFIG_SYS_FSL_ERRATUM_A004468 +#define CONFIG_SYS_FSL_ERRATUM_A_004934 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 + +#elif defined(CONFIG_PPC_B4860) +#define CONFIG_SYS_PPC64 /* 64-bit core */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ +#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ +#define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 4 +#define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 1 +#define CONFIG_SYS_NUM_FM1_DTSEC 6 +#define CONFIG_SYS_NUM_FM1_10GEC 2 +#define CONFIG_NUM_DDR_CONTROLLERS 1 +#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 +#define CONFIG_SYS_FMAN_V3 +#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_USB1_PHY_ENABLE +#define CONFIG_SYS_FSL_ERRATUM_A_004934 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 + #else #error Processor type not defined for this platform #endif diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h index e271342f08..640d3297d6 100644 --- a/arch/powerpc/include/asm/fsl_ddr_sdram.h +++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h @@ -84,6 +84,8 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #define FSL_DDR_4WAY_4KB_INTERLEAVING 0x1C #define FSL_DDR_4WAY_8KB_INTERLEAVING 0x1D +#define SDRAM_CS_CONFIG_EN 0x80000000 + /* DDR_SDRAM_CFG - DDR SDRAM Control Configuration */ #define SDRAM_CFG_MEM_EN 0x80000000 @@ -96,6 +98,7 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; #define SDRAM_CFG_SDRAM_TYPE_SHIFT 24 #define SDRAM_CFG_DYN_PWR 0x00200000 #define SDRAM_CFG_DBW_MASK 0x00180000 +#define SDRAM_CFG_DBW_SHIFT 19 #define SDRAM_CFG_32_BE 0x00080000 #define SDRAM_CFG_16_BE 0x00100000 #define SDRAM_CFG_8_BE 0x00040000 @@ -145,6 +148,31 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t; /* DDR_CDR1 */ #define DDR_CDR1_DHC_EN 0x80000000 +#define DDR_CDR1_ODT_SHIFT 17 +#define DDR_CDR1_ODT_MASK 0x6 +#define DDR_CDR2_ODT_MASK 0x1 +#define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT) +#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK) + +#if (defined(CONFIG_SYS_FSL_DDR_VER) && \ + (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7)) +#define DDR_CDR_ODT_OFF 0x0 +#define DDR_CDR_ODT_120ohm 0x1 +#define DDR_CDR_ODT_180ohm 0x2 +#define DDR_CDR_ODT_75ohm 0x3 +#define DDR_CDR_ODT_110ohm 0x4 +#define DDR_CDR_ODT_60hm 0x5 +#define DDR_CDR_ODT_70ohm 0x6 +#define DDR_CDR_ODT_47ohm 0x7 +#else +#define DDR_CDR_ODT_75ohm 0x0 +#define DDR_CDR_ODT_55ohm 0x1 +#define DDR_CDR_ODT_60ohm 0x2 +#define DDR_CDR_ODT_50ohm 0x3 +#define DDR_CDR_ODT_150ohm 0x4 +#define DDR_CDR_ODT_43ohm 0x5 +#define DDR_CDR_ODT_120ohm 0x6 +#endif /* Record of register values computed */ typedef struct fsl_ddr_cfg_regs_s { @@ -177,6 +205,8 @@ typedef struct fsl_ddr_cfg_regs_s { unsigned int timing_cfg_5; unsigned int ddr_zq_cntl; unsigned int ddr_wrlvl_cntl; + unsigned int ddr_wrlvl_cntl_2; + unsigned int ddr_wrlvl_cntl_3; unsigned int ddr_sr_cntr; unsigned int ddr_sdram_rcw_1; unsigned int ddr_sdram_rcw_2; @@ -262,6 +292,8 @@ typedef struct memctl_options_s { unsigned int wrlvl_override; unsigned int wrlvl_sample; /* Write leveling */ unsigned int wrlvl_start; + unsigned int wrlvl_ctl_2; + unsigned int wrlvl_ctl_3; unsigned int half_strength_driver_enable; unsigned int twoT_en; @@ -288,6 +320,7 @@ typedef struct memctl_options_s { unsigned int rcw_2; /* control register 1 */ unsigned int ddr_cdr1; + unsigned int ddr_cdr2; unsigned int trwt_override; unsigned int trwt; /* read-to-write turnaround */ @@ -298,6 +331,7 @@ extern phys_size_t fsl_ddr_sdram_size(void); extern int fsl_use_spd(void); extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num); +u32 fsl_ddr_get_intl3r(void); /* * The 85xx boards have a common prototype for fixed_sdram so put the diff --git a/arch/powerpc/include/asm/fsl_fman.h b/arch/powerpc/include/asm/fsl_fman.h index 2c0c9bc2f2..299daca132 100644 --- a/arch/powerpc/include/asm/fsl_fman.h +++ b/arch/powerpc/include/asm/fsl_fman.h @@ -423,6 +423,14 @@ typedef struct fm_10gec_mdio { u8 res[4*1024]; } fm_10gec_mdio_t; +typedef struct fm_memac { + u8 res[4*1024]; +} fm_memac_t; + +typedef struct fm_memac_mdio { + u8 res[4*1024]; +} fm_memac_mdio_t; + typedef struct fm_1588 { u8 res[4*1024]; } fm_1588_t; @@ -446,6 +454,14 @@ typedef struct ccsr_fman { u8 res1[8*1024]; fm_soft_parser_t fm_soft_parser; u8 res2[96*1024]; +#ifdef CONFIG_SYS_FMAN_V3 + struct { + fm_memac_t fm_memac; + fm_memac_mdio_t fm_memac_mdio; + } memac[10]; + u8 res4[32*1024]; + fm_memac_mdio_t fm_dedicated_mdio[2]; +#else struct { fm_dtsec_t fm_dtesc; fm_mdio_t fm_mdio; @@ -455,6 +471,7 @@ typedef struct ccsr_fman { fm_10gec_mdio_t fm_10gec_mdio; } mac_10g[1]; u8 res4[48*1024]; +#endif fm_1588_t fm_1588; u8 res5[4*1024]; } ccsr_fman_t; diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h index a9973b80da..d759de975e 100644 --- a/arch/powerpc/include/asm/fsl_liodn.h +++ b/arch/powerpc/include/asm/fsl_liodn.h @@ -94,6 +94,11 @@ extern void fdt_fixup_liodn(void *blob); SET_GUTS_LIODN(compat, liodn, pex##pciNum##liodnr,\ CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET) +#define SET_PCI_LIODN_BASE(compat, pciNum, liodn) \ + SET_LIODN_ENTRY_1(compat, liodn,\ + offsetof(ccsr_pcix_t, liodn_base) + CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET,\ + CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET) + /* reg nodes for DMA start @ 0x300 */ #define SET_DMA_LIODN(dmaNum, liodn) \ SET_GUTS_LIODN("fsl,eloplus-dma", liodn, dma##dmaNum##liodnr,\ @@ -118,6 +123,12 @@ extern void fdt_fixup_liodn(void *blob); CONFIG_SYS_FSL_CORENET_PME_OFFSET, \ CONFIG_SYS_FSL_CORENET_PME_OFFSET) +#define SET_PMAN_LIODN(num, liodn) \ + SET_LIODN_ENTRY_2("fsl,pman", liodn, 0, \ + offsetof(struct ccsr_pman, ppa1) + \ + CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET, \ + CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET) + /* -1 from portID due to how immap has the registers */ #define FM_PPID_RX_PORT_OFFSET(fmNum, portID) \ CONFIG_SYS_FSL_FM##fmNum##_OFFSET + \ @@ -184,11 +195,13 @@ extern void fdt_fixup_liodn(void *blob); extern struct liodn_id_table liodn_tbl[], liodn_bases[], sec_liodn_tbl[]; extern struct liodn_id_table raide_liodn_tbl[]; extern struct liodn_id_table fman1_liodn_tbl[], fman2_liodn_tbl[]; +#ifdef CONFIG_SYS_SRIO extern struct srio_liodn_id_table srio_liodn_tbl[]; +extern int srio_liodn_tbl_sz; +#endif extern struct liodn_id_table rman_liodn_tbl[]; extern int liodn_tbl_sz, sec_liodn_tbl_sz, raide_liodn_tbl_sz; extern int fman1_liodn_tbl_sz, fman2_liodn_tbl_sz; -extern int srio_liodn_tbl_sz; extern int rman_liodn_tbl_sz; #endif diff --git a/arch/powerpc/include/asm/fsl_memac.h b/arch/powerpc/include/asm/fsl_memac.h new file mode 100644 index 0000000000..d6b60e65bc --- /dev/null +++ b/arch/powerpc/include/asm/fsl_memac.h @@ -0,0 +1,271 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Roy Zang <tie-fei.zang@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MEMAC_H__ +#define __MEMAC_H__ + +#include <phy.h> + +struct memac { + /* memac general control and status registers */ + u32 res_0[2]; + u32 command_config; /* Control and configuration register */ + u32 mac_addr_0; /* Lower 32 bits of 48-bit MAC address */ + u32 mac_addr_1; /* Upper 16 bits of 48-bit MAC address */ + u32 maxfrm; /* Maximum frame length register */ + u32 res_18[5]; + u32 hashtable_ctrl; /* Hash table control register */ + u32 res_30[4]; + u32 ievent; /* Interrupt event register */ + u32 tx_ipg_length; /* Transmitter inter-packet-gap register */ + u32 res_48; + u32 imask; /* interrupt mask register */ + u32 res_50; + u32 cl_pause_quanta[4]; /* CL01-CL67 pause quanta register */ + u32 cl_pause_thresh[4]; /* CL01-CL67 pause thresh register */ + u32 rx_pause_status; /* Receive pause status register */ + u32 res_78[2]; + u32 mac_addr[14]; /* MAC address */ + u32 lpwake_timer; /* EEE low power wakeup timer register */ + u32 sleep_timer; /* Transmit EEE Low Power Timer register */ + u32 res_c0[8]; + u32 statn_config; /* Statistics configuration register */ + u32 res_e4[7]; + + /* memac statistics counter registers */ + u32 rx_eoct_l; /* Rx ethernet octests lower */ + u32 rx_eoct_u; /* Rx ethernet octests upper */ + u32 rx_oct_l; /* Rx octests lower */ + u32 rx_oct_u; /* Rx octests upper */ + u32 rx_align_err_l; /* Rx alignment error lower */ + u32 rx_align_err_u; /* Rx alignment error upper */ + u32 rx_pause_frame_l; /* Rx valid pause frame upper */ + u32 rx_pause_frame_u; /* Rx valid pause frame upper */ + u32 rx_frame_l; /* Rx frame counter lower */ + u32 rx_frame_u; /* Rx frame counter upper */ + u32 rx_frame_crc_err_l; /* Rx frame check sequence error lower */ + u32 rx_frame_crc_err_u; /* Rx frame check sequence error upper */ + u32 rx_vlan_l; /* Rx VLAN frame lower */ + u32 rx_vlan_u; /* Rx VLAN frame upper */ + u32 rx_err_l; /* Rx frame error lower */ + u32 rx_err_u; /* Rx frame error upper */ + u32 rx_uni_l; /* Rx unicast frame lower */ + u32 rx_uni_u; /* Rx unicast frame upper */ + u32 rx_multi_l; /* Rx multicast frame lower */ + u32 rx_multi_u; /* Rx multicast frame upper */ + u32 rx_brd_l; /* Rx broadcast frame lower */ + u32 rx_brd_u; /* Rx broadcast frame upper */ + u32 rx_drop_l; /* Rx dropped packets lower */ + u32 rx_drop_u; /* Rx dropped packets upper */ + u32 rx_pkt_l; /* Rx packets lower */ + u32 rx_pkt_u; /* Rx packets upper */ + u32 rx_undsz_l; /* Rx undersized packet lower */ + u32 rx_undsz_u; /* Rx undersized packet upper */ + u32 rx_64_l; /* Rx 64 oct packet lower */ + u32 rx_64_u; /* Rx 64 oct packet upper */ + u32 rx_127_l; /* Rx 65 to 127 oct packet lower */ + u32 rx_127_u; /* Rx 65 to 127 oct packet upper */ + u32 rx_255_l; /* Rx 128 to 255 oct packet lower */ + u32 rx_255_u; /* Rx 128 to 255 oct packet upper */ + u32 rx_511_l; /* Rx 256 to 511 oct packet lower */ + u32 rx_511_u; /* Rx 256 to 511 oct packet upper */ + u32 rx_1023_l; /* Rx 512 to 1023 oct packet lower */ + u32 rx_1023_u; /* Rx 512 to 1023 oct packet upper */ + u32 rx_1518_l; /* Rx 1024 to 1518 oct packet lower */ + u32 rx_1518_u; /* Rx 1024 to 1518 oct packet upper */ + u32 rx_1519_l; /* Rx 1519 to max oct packet lower */ + u32 rx_1519_u; /* Rx 1519 to max oct packet upper */ + u32 rx_oversz_l; /* Rx oversized packet lower */ + u32 rx_oversz_u; /* Rx oversized packet upper */ + u32 rx_jabber_l; /* Rx Jabber packet lower */ + u32 rx_jabber_u; /* Rx Jabber packet upper */ + u32 rx_frag_l; /* Rx Fragment packet lower */ + u32 rx_frag_u; /* Rx Fragment packet upper */ + u32 rx_cnp_l; /* Rx control packet lower */ + u32 rx_cnp_u; /* Rx control packet upper */ + u32 rx_drntp_l; /* Rx dripped not truncated packet lower */ + u32 rx_drntp_u; /* Rx dripped not truncated packet upper */ + u32 res_1d0[0xc]; + + u32 tx_eoct_l; /* Tx ethernet octests lower */ + u32 tx_eoct_u; /* Tx ethernet octests upper */ + u32 tx_oct_l; /* Tx octests lower */ + u32 tx_oct_u; /* Tx octests upper */ + u32 res_210[0x2]; + u32 tx_pause_frame_l; /* Tx valid pause frame lower */ + u32 tx_pause_frame_u; /* Tx valid pause frame upper */ + u32 tx_frame_l; /* Tx frame counter lower */ + u32 tx_frame_u; /* Tx frame counter upper */ + u32 tx_frame_crc_err_l; /* Tx frame check sequence error lower */ + u32 tx_frame_crc_err_u; /* Tx frame check sequence error upper */ + u32 tx_vlan_l; /* Tx VLAN frame lower */ + u32 tx_vlan_u; /* Tx VLAN frame upper */ + u32 tx_frame_err_l; /* Tx frame error lower */ + u32 tx_frame_err_u; /* Tx frame error upper */ + u32 tx_uni_l; /* Tx unicast frame lower */ + u32 tx_uni_u; /* Tx unicast frame upper */ + u32 tx_multi_l; /* Tx multicast frame lower */ + u32 tx_multi_u; /* Tx multicast frame upper */ + u32 tx_brd_l; /* Tx broadcast frame lower */ + u32 tx_brd_u; /* Tx broadcast frame upper */ + u32 res_258[0x2]; + u32 tx_pkt_l; /* Tx packets lower */ + u32 tx_pkt_u; /* Tx packets upper */ + u32 tx_undsz_l; /* Tx undersized packet lower */ + u32 tx_undsz_u; /* Tx undersized packet upper */ + u32 tx_64_l; /* Tx 64 oct packet lower */ + u32 tx_64_u; /* Tx 64 oct packet upper */ + u32 tx_127_l; /* Tx 65 to 127 oct packet lower */ + u32 tx_127_u; /* Tx 65 to 127 oct packet upper */ + u32 tx_255_l; /* Tx 128 to 255 oct packet lower */ + u32 tx_255_u; /* Tx 128 to 255 oct packet upper */ + u32 tx_511_l; /* Tx 256 to 511 oct packet lower */ + u32 tx_511_u; /* Tx 256 to 511 oct packet upper */ + u32 tx_1023_l; /* Tx 512 to 1023 oct packet lower */ + u32 tx_1023_u; /* Tx 512 to 1023 oct packet upper */ + u32 tx_1518_l; /* Tx 1024 to 1518 oct packet lower */ + u32 tx_1518_u; /* Tx 1024 to 1518 oct packet upper */ + u32 tx_1519_l; /* Tx 1519 to max oct packet lower */ + u32 tx_1519_u; /* Tx 1519 to max oct packet upper */ + u32 res_2a8[0x6]; + u32 tx_cnp_l; /* Tx control packet lower */ + u32 tx_cnp_u; /* Tx control packet upper */ + u32 res_2c8[0xe]; + + /* Line interface control register */ + u32 if_mode; /* interface mode control */ + u32 if_status; /* interface status */ + u32 res_308[0xe]; + + /* HiGig/2 Register */ + u32 hg_config; /* HiGig2 control and configuration */ + u32 res_344[0x3]; + u32 hg_pause_quanta; /* HiGig2 pause quanta */ + u32 res_354[0x3]; + u32 hg_pause_thresh; /* HiGig2 pause quanta threshold */ + u32 res_364[0x3]; + u32 hgrx_pause_status; /* HiGig2 rx pause quanta status */ + u32 hg_fifos_status; /* HiGig2 fifos status */ + u32 rhm; /* Rx HiGig2 message counter register */ + u32 thm;/* Tx HiGig2 message counter register */ + u32 res_380[0x320]; +}; + +/* COMMAND_CONFIG - command and configuration register */ +#define MEMAC_CMD_CFG_RX_EN 0x00000002 /* MAC Rx path enable */ +#define MEMAC_CMD_CFG_TX_EN 0x00000001 /* MAC Tx path enable */ +#define MEMAC_CMD_CFG_RXTX_EN (MEMAC_CMD_CFG_RX_EN | MEMAC_CMD_CFG_TX_EN) + +/* HASHTABLE_CTRL - Hashtable control register */ +#define HASHTABLE_CTRL_MCAST_EN 0x00000200 /* enable mulitcast Rx hash */ +#define HASHTABLE_CTRL_ADDR_MASK 0x000001ff + +/* TX_IPG_LENGTH - Transmit inter-packet gap length register */ +#define TX_IPG_LENGTH_IPG_LEN_MASK 0x000003ff + +/* IMASK - interrupt mask register */ +#define IMASK_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event mask */ +#define IMASK_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion mask */ +#define IMASK_REM_FAULT 0x00004000 /* remote fault mask */ +#define IMASK_LOC_FAULT 0x00002000 /* local fault mask */ +#define IMASK_TX_ECC_ER 0x00001000 /* Tx frame ECC error mask */ +#define IMASK_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow mask */ +#define IMASK_TX_ER 0x00000200 /* Tx frame error mask */ +#define IMASK_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow mask */ +#define IMASK_RX_ECC_ER 0x00000080 /* Rx frame ECC error mask */ +#define IMASK_RX_JAB_FRM 0x00000040 /* Rx jabber frame mask */ +#define IMASK_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame mask */ +#define IMASK_RX_RUNT_FRM 0x00000010 /* Rx runt frame mask */ +#define IMASK_RX_FRAG_FRM 0x00000008 /* Rx fragment frame mask */ +#define IMASK_RX_LEN_ER 0x00000004 /* Rx payload length error mask */ +#define IMASK_RX_CRC_ER 0x00000002 /* Rx CRC error mask */ +#define IMASK_RX_ALIGN_ER 0x00000001 /* Rx alignment error mask */ + +#define IMASK_MASK_ALL 0x00000000 + +/* IEVENT - interrupt event register */ +#define IEVENT_MDIO_SCAN_EVENT 0x00010000 /* MDIO scan event */ +#define IEVENT_MDIO_CMD_CMPL 0x00008000 /* MDIO cmd completion */ +#define IEVENT_REM_FAULT 0x00004000 /* remote fault */ +#define IEVENT_LOC_FAULT 0x00002000 /* local fault */ +#define IEVENT_TX_ECC_ER 0x00001000 /* Tx frame ECC error */ +#define IEVENT_TX_FIFO_UNFL 0x00000800 /* Tx FIFO underflow */ +#define IEVENT_TX_ER 0x00000200 /* Tx frame error */ +#define IEVENT_RX_FIFO_OVFL 0x00000100 /* Rx FIFO overflow */ +#define IEVENT_RX_ECC_ER 0x00000080 /* Rx frame ECC error */ +#define IEVENT_RX_JAB_FRM 0x00000040 /* Rx jabber frame */ +#define IEVENT_RX_OVRSZ_FRM 0x00000020 /* Rx oversized frame */ +#define IEVENT_RX_RUNT_FRM 0x00000010 /* Rx runt frame */ +#define IEVENT_RX_FRAG_FRM 0x00000008 /* Rx fragment frame */ +#define IEVENT_RX_LEN_ER 0x00000004 /* Rx payload length error */ +#define IEVENT_RX_CRC_ER 0x00000002 /* Rx CRC error */ +#define IEVENT_RX_ALIGN_ER 0x00000001 /* Rx alignment error */ + +#define IEVENT_CLEAR_ALL 0xffffffff + +/* IF_MODE - Interface Mode Register */ +#define IF_MODE_EN_AUTO 0x00008000 /* 1 - Enable automatic speed selection */ +#define IF_MODE_XGMII 0x00000000 /* 00- XGMII(10) interface mode */ +#define IF_MODE_GMII 0x00000002 /* 10- GMII interface mode */ +#define IF_MODE_MASK 0x00000003 /* mask for mode interface mode */ +#define IF_MODE_RG 0x00000004 /* 1- RGMII */ +#define IF_MODE_RM 0x00000008 /* 1- RGMII */ + +#define IF_DEFAULT (IF_GMII) + +/* Internal PHY Registers - SGMII */ +#define PHY_SGMII_CR_PHY_RESET 0x8000 +#define PHY_SGMII_CR_RESET_AN 0x0200 +#define PHY_SGMII_CR_DEF_VAL 0x1140 +#define PHY_SGMII_DEV_ABILITY_SGMII 0x4001 +#define PHY_SGMII_IF_MODE_AN 0x0002 +#define PHY_SGMII_IF_MODE_SGMII 0x0001 + +struct memac_mdio_controller { + u32 res0[0xc]; + u32 mdio_stat; /* MDIO configuration and status */ + u32 mdio_ctl; /* MDIO control */ + u32 mdio_data; /* MDIO data */ + u32 mdio_addr; /* MDIO address */ +}; + +#define MDIO_STAT_CLKDIV(x) (((x>>1) & 0xff) << 8) +#define MDIO_STAT_BSY (1 << 0) +#define MDIO_STAT_RD_ER (1 << 1) +#define MDIO_STAT_PRE (1 << 5) +#define MDIO_STAT_ENC (1 << 6) +#define MDIO_STAT_HOLD_15_CLK (7 << 2) + +#define MDIO_CTL_DEV_ADDR(x) (x & 0x1f) +#define MDIO_CTL_PORT_ADDR(x) ((x & 0x1f) << 5) +#define MDIO_CTL_PRE_DIS (1 << 10) +#define MDIO_CTL_SCAN_EN (1 << 11) +#define MDIO_CTL_POST_INC (1 << 14) +#define MDIO_CTL_READ (1 << 15) + +#define MDIO_DATA(x) (x & 0xffff) +#define MDIO_DATA_BSY (1 << 31) + +struct fsl_enet_mac; + +void init_memac(struct fsl_enet_mac *mac, void *base, void *phyregs, + int max_rx_len); + +#endif diff --git a/arch/powerpc/include/asm/fsl_portals.h b/arch/powerpc/include/asm/fsl_portals.h index 5644044eb8..b75f5b975a 100644 --- a/arch/powerpc/include/asm/fsl_portals.h +++ b/arch/powerpc/include/asm/fsl_portals.h @@ -32,15 +32,16 @@ enum fsl_dpaa_dev { FSL_HW_PORTAL_FMAN2, #endif #endif -#ifdef CONFIG_SYS_DPAA_PME FSL_HW_PORTAL_PME, -#endif #ifdef CONFIG_SYS_FSL_RAID_ENGINE FSL_HW_PORTAL_RAID_ENGINE, #endif #ifdef CONFIG_SYS_DPAA_RMAN FSL_HW_PORTAL_RMAN, #endif +#ifdef CONFIG_SYS_DPAA_DCE + FSL_HW_PORTAL_DCE, +#endif }; diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h index 22525f1156..6cd7379c8f 100644 --- a/arch/powerpc/include/asm/fsl_serdes.h +++ b/arch/powerpc/include/asm/fsl_serdes.h @@ -37,11 +37,17 @@ enum srds_prtcl { SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, + SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC10, SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM2_DTSEC5, + SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC10, SGMII_TSEC1, SGMII_TSEC2, SGMII_TSEC3, @@ -49,13 +55,49 @@ enum srds_prtcl { XAUI_FM1, XAUI_FM2, AURORA, + CPRI1, + CPRI2, + CPRI3, + CPRI4, + CPRI5, + CPRI6, + CPRI7, + CPRI8, + XAUI_FM1_MAC9, + XAUI_FM1_MAC10, + XAUI_FM2_MAC9, + XAUI_FM2_MAC10, + HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, + HIGIG_FM2_MAC9, + HIGIG_FM2_MAC10, + QSGMII_FM1_A, /* A indicates MACs 1-4 */ + QSGMII_FM1_B, /* B indicates MACs 5,6,9,10 */ + QSGMII_FM2_A, + QSGMII_FM2_B, + XFI_FM1_MAC9, + XFI_FM1_MAC10, + XFI_FM2_MAC9, + XFI_FM2_MAC10, + INTERLAKEN, +}; + +enum srds { + FSL_SRDS_1 = 0, + FSL_SRDS_2 = 1, + FSL_SRDS_3 = 2, + FSL_SRDS_4 = 3, }; int is_serdes_configured(enum srds_prtcl device); void fsl_serdes_init(void); #ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +int serdes_get_first_lane(u32 sd, enum srds_prtcl device); +#else int serdes_get_first_lane(enum srds_prtcl device); +#endif #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9 void serdes_reset_rx(enum srds_prtcl device); #endif diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h index 5a5877fc2c..cb3a80bb2b 100644 --- a/arch/powerpc/include/asm/global_data.h +++ b/arch/powerpc/include/asm/global_data.h @@ -38,7 +38,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long bus_clk; #if defined(CONFIG_8xx) @@ -63,6 +63,8 @@ typedef struct global_data { u32 tsec1_clk; u32 tsec2_clk; u32 usbdr_clk; +#elif defined(CONFIG_MPC8309) + u32 usbdr_clk; #endif #if defined (CONFIG_MPC834x) u32 usbmph_clk; diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h index 2ba502ad11..679832cd6c 100644 --- a/arch/powerpc/include/asm/immap_83xx.h +++ b/arch/powerpc/include/asm/immap_83xx.h @@ -73,12 +73,19 @@ typedef struct sysconf83xx { u32 obir; /* Output Buffer Impedance Register */ u8 res8[0xC]; u32 pecr1; /* PCI Express control register 1 */ -#ifdef CONFIG_MPC8308 - u32 sdhccr; /* eSDHC Control Registers for MPC8308 */ +#if defined(CONFIG_MPC830x) + u32 sdhccr; /* eSDHC Control Registers for MPC830x */ #else u32 pecr2; /* PCI Express control register 2 */ #endif +#if defined(CONFIG_MPC8309) + u32 can_dbg_ctrl; + u32 res9a; + u32 gpr1; + u8 res9b[0xAC]; +#else u8 res9[0xB8]; +#endif } sysconf83xx_t; /* @@ -708,7 +715,11 @@ typedef struct serdes83xx { * On Chip ROM */ typedef struct rom83xx { +#if defined(CONFIG_MPC8309) + u8 mem[0x8000]; +#else u8 mem[0x10000]; +#endif } rom83xx_t; /* @@ -972,6 +983,56 @@ typedef struct immap { u8 res8[0xC0000]; u8 qe[0x100000]; /* QE block */ } immap_t; +#elif defined(CONFIG_MPC8309) +typedef struct immap { + sysconf83xx_t sysconf; /* System configuration */ + wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */ + rtclk83xx_t rtc; /* Real Time Clock Module Registers */ + rtclk83xx_t pit; /* Periodic Interval Timer */ + gtm83xx_t gtm[2]; /* Global Timers Module */ + ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */ + arbiter83xx_t arbiter; /* System Arbiter Registers */ + reset83xx_t reset; /* Reset Module */ + clk83xx_t clk; /* System Clock Module */ + pmc83xx_t pmc; /* Power Management Control Module */ + gpio83xx_t gpio[2]; /* General purpose I/O module */ + u8 res0[0x500]; /* res0 1.25 KBytes added for 8309 */ + qepi83xx_t qepi; /* QE Ports Interrupts Registers */ + qepio83xx_t qepio; /* QE Parallel I/O ports */ + u8 res1[0x800]; + ddr83xx_t ddr; /* DDR Memory Controller Memory */ + fsl_i2c_t i2c[2]; /* I2C Controllers */ + u8 res2[0x1300]; + duart83xx_t duart[2]; /* DUART */ + u8 res3[0x200]; + duart83xx_t duart1[2]; /* DUART */ + u8 res4[0x500]; + fsl_lbc_t im_lbc; /* Local Bus Controller Regs */ + u8 res5[0x1000]; + u8 spi[0x100]; + u8 res6[0xf00]; + dma83xx_t dma; /* DMA */ + pciconf83xx_t pci_conf[1]; /* PCI Configuration Registers */ + u8 res7[0x80]; + ios83xx_t ios; /* Sequencer (IOS) */ + pcictrl83xx_t pci_ctrl[1]; /* PCI Control & Status Registers */ + u8 res8[0x13A00]; + u8 can1[0x1000]; /* Flexcan 1 */ + u8 can2[0x1000]; /* Flexcan 2 */ + u8 res9[0x5000]; + usb83xx_t usb; + u8 res10[0x5000]; + u8 can3[0x1000]; /* Flexcan 3 */ + u8 can4[0x1000]; /* Flexcan 4 */ + u8 res11[0x1000]; + u8 dma1[0x2000]; /* DMA */ + sdhc83xx_t sdhc; /* SDHC Controller */ + u8 res12[0xC1000]; + rom83xx_t rom; /* On Chip ROM */ + u8 res13[0x8000]; + u8 qe[0x100000]; /* QE block */ + u8 res14[0xE00000];/* Added for 8309 */ +} immap_t; #endif #define CONFIG_SYS_MPC83xx_DDR_OFFSET (0x2000) diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 7de33a7dde..969f726c36 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -296,7 +296,9 @@ typedef struct ccsr_pcix { u32 cfg_addr; /* PCIX Configuration Addr */ u32 cfg_data; /* PCIX Configuration Data */ u32 int_ack; /* PCIX IRQ Acknowledge */ - u8 res1[3060]; + u8 res000c[52]; + u32 liodn_base; /* PCIX LIODN base register */ + u8 res0044[3004]; u32 potar0; /* PCIX Outbound Transaction Addr 0 */ u32 potear0; /* PCIX Outbound Translation Extended Addr 0 */ u32 powbar0; /* PCIX Outbound Window Base Addr 0 */ @@ -1687,6 +1689,77 @@ typedef struct ccsr_gur { u32 alt_pmuxcr; /* Alt function signal multiplex control */ u8 res6[12]; u32 devdisr; /* Device disable control */ + u32 devdisr2; /* Device disable control 2 */ + u32 devdisr3; /* Device disable control 3 */ + u32 devdisr4; /* Device disable control 4 */ +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + u32 devdisr5; /* Device disable control 5 */ +#define FSL_CORENET_DEVDISR_PBL 0x80000000 +#define FSL_CORENET_DEVDISR_PMAN 0x40000000 +#define FSL_CORENET_DEVDISR_ESDHC 0x20000000 +#define FSL_CORENET_DEVDISR_DMA1 0x00800000 +#define FSL_CORENET_DEVDISR_DMA2 0x00400000 +#define FSL_CORENET_DEVDISR_USB1 0x00080000 +#define FSL_CORENET_DEVDISR_USB2 0x00040000 +#define FSL_CORENET_DEVDISR_SATA1 0x00008000 +#define FSL_CORENET_DEVDISR_SATA2 0x00004000 +#define FSL_CORENET_DEVDISR_PME 0x00000800 +#define FSL_CORENET_DEVDISR_SEC 0x00000200 +#define FSL_CORENET_DEVDISR_RMU 0x00000080 +#define FSL_CORENET_DEVDISR_DCE 0x00000040 +#define FSL_CORENET_DEVDISR2_DTSEC1_1 0x80000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_2 0x40000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_3 0x20000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_4 0x10000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_5 0x08000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_6 0x04000000 +#define FSL_CORENET_DEVDISR2_DTSEC1_9 0x00800000 +#define FSL_CORENET_DEVDISR2_DTSEC1_10 0x00400000 +#define FSL_CORENET_DEVDISR2_10GEC1_1 0x00800000 +#define FSL_CORENET_DEVDISR2_10GEC1_2 0x00400000 +#define FSL_CORENET_DEVDISR2_DTSEC2_1 0x00080000 +#define FSL_CORENET_DEVDISR2_DTSEC2_2 0x00040000 +#define FSL_CORENET_DEVDISR2_DTSEC2_3 0x00020000 +#define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00010000 +#define FSL_CORENET_DEVDISR2_DTSEC2_5 0x00008000 +#define FSL_CORENET_DEVDISR2_DTSEC2_6 0x00004000 +#define FSL_CORENET_DEVDISR2_DTSEC2_9 0x00000800 +#define FSL_CORENET_DEVDISR2_DTSEC2_10 0x00000400 +#define FSL_CORENET_DEVDISR2_10GEC2_1 0x00000800 +#define FSL_CORENET_DEVDISR2_10GEC2_2 0x00000400 +#define FSL_CORENET_DEVDISR2_FM1 0x00000080 +#define FSL_CORENET_DEVDISR2_FM2 0x00000040 +#define FSL_CORENET_DEVDISR2_CPRI 0x00000008 +#define FSL_CORENET_DEVDISR3_PCIE1 0x80000000 +#define FSL_CORENET_DEVDISR3_PCIE2 0x40000000 +#define FSL_CORENET_DEVDISR3_PCIE3 0x20000000 +#define FSL_CORENET_DEVDISR3_PCIE4 0x10000000 +#define FSL_CORENET_DEVDISR3_SRIO1 0x08000000 +#define FSL_CORENET_DEVDISR3_SRIO2 0x04000000 +#define FSL_CORENET_DEVDISR3_QMAN 0x00080000 +#define FSL_CORENET_DEVDISR3_BMAN 0x00040000 +#define FSL_CORENET_DEVDISR3_LA1 0x00008000 +#define FSL_CORENET_DEVDISR3_MAPLE1 0x00000800 +#define FSL_CORENET_DEVDISR3_MAPLE2 0x00000400 +#define FSL_CORENET_DEVDISR3_MAPLE3 0x00000200 +#define FSL_CORENET_DEVDISR4_I2C1 0x80000000 +#define FSL_CORENET_DEVDISR4_I2C2 0x40000000 +#define FSL_CORENET_DEVDISR4_DUART1 0x20000000 +#define FSL_CORENET_DEVDISR4_DUART2 0x10000000 +#define FSL_CORENET_DEVDISR4_ESPI 0x08000000 +#define FSL_CORENET_DEVDISR5_DDR1 0x80000000 +#define FSL_CORENET_DEVDISR5_DDR2 0x40000000 +#define FSL_CORENET_DEVDISR5_DDR3 0x20000000 +#define FSL_CORENET_DEVDISR5_CPC1 0x08000000 +#define FSL_CORENET_DEVDISR5_CPC2 0x04000000 +#define FSL_CORENET_DEVDISR5_CPC3 0x02000000 +#define FSL_CORENET_DEVDISR5_IFC 0x00800000 +#define FSL_CORENET_DEVDISR5_GPIO 0x00400000 +#define FSL_CORENET_DEVDISR5_DBG 0x00200000 +#define FSL_CORENET_DEVDISR5_NAL 0x00100000 +#define FSL_CORENET_DEVDISR5_TIMERS 0x00020000 +#define FSL_CORENET_NUM_DEVDISR 5 +#else #define FSL_CORENET_DEVDISR_PCIE1 0x80000000 #define FSL_CORENET_DEVDISR_PCIE2 0x40000000 #define FSL_CORENET_DEVDISR_PCIE3 0x20000000 @@ -1712,7 +1785,6 @@ typedef struct ccsr_gur { #define FSL_CORENET_DEVDISR_I2C2 0x00000010 #define FSL_CORENET_DEVDISR_DUART1 0x00000002 #define FSL_CORENET_DEVDISR_DUART2 0x00000001 - u32 devdisr2; /* Device disable control 2 */ #define FSL_CORENET_DEVDISR2_PME 0x80000000 #define FSL_CORENET_DEVDISR2_SEC 0x40000000 #define FSL_CORENET_DEVDISR2_QMBM 0x08000000 @@ -1731,8 +1803,8 @@ typedef struct ccsr_gur { #define FSL_CORENET_DEVDISR2_DTSEC2_4 0x00001000 #define FSL_CORENET_DEVDISR2_DTSEC2_5 0x00000800 #define FSL_CORENET_NUM_DEVDISR 2 - u8 res7[8]; u32 powmgtcsr; /* Power management status & control */ +#endif u8 res8[12]; u32 coredisru; /* uppper portion for support of 64 cores */ u32 coredisrl; /* lower portion for support of 64 cores */ @@ -1755,13 +1827,47 @@ typedef struct ccsr_gur { u32 brrl; /* Boot release */ u8 res17[24]; u32 rcwsr[16]; /* Reset control word status */ + +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 16 +#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x3f +#if defined(CONFIG_PPC_T4240) +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfc000000 +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 26 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 17 +#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL 0x0000f800 +#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT 11 +#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL 0x000000f8 +#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT 3 +#elif defined(CONFIG_PPC_B4860) +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfe000000 +#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 25 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000 +#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 16 +#endif +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1 0x00800000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2 0x00400000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL1 0x00200000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL2 0x00100000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL1 0x00080000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL2 0x00040000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL1 0x00020000 +#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL2 0x00010000 + +#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ +#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 17 +#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x1f #define FSL_CORENET_RCWSR4_SRDS_PRTCL 0xfc000000 #define FSL_CORENET_RCWSR5_DDR_SYNC 0x00000080 #define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT 7 #define FSL_CORENET_RCWSR5_SRDS_EN 0x00002000 +#define FSL_CORENET_RCWSR5_SRDS2_EN 0x00001000 #define FSL_CORENET_RCWSR6_BOOT_LOC 0x0f800000 #define FSL_CORENET_RCWSRn_SRDS_LPD_B2 0x3c000000 /* bits 162..165 */ #define FSL_CORENET_RCWSRn_SRDS_LPD_B3 0x003c0000 /* bits 170..173 */ +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ + #define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT 0x00400000 #define FSL_CORENET_RCWSR8_HOST_AGT_B1 0x00e00000 #define FSL_CORENET_RCWSR8_HOST_AGT_B2 0x00100000 @@ -1784,6 +1890,24 @@ typedef struct ccsr_gur { #define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_MII 0x00100000 #define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_NONE 0x00180000 #endif +#if defined(CONFIG_PPC_P5040) +#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_MII 0x00800000 +#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_NONE 0x00c00000 +#define FSL_CORENET_RCWSR11_EC2 0x00180000 /* bits 363..364 */ +#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII 0x00100000 +#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_NONE 0x00180000 +#endif +#if defined(CONFIG_PPC_T4240) +#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */ +#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000 +#define FSL_CORENET_RCWSR13_EC2 0x18000000 /* bits 419..420 */ +#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC6_RGMII 0x08000000 +#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000 +#endif u8 res18[192]; u32 scratchrw[4]; /* Scratch Read/Write */ u8 res19[240]; @@ -1880,34 +2004,38 @@ typedef struct ccsr_gur { #define rmuliodnr rio1maintliodnr typedef struct ccsr_clk { - u32 clkc0csr; /* Core 0 Clock control/status */ + u32 clkc0csr; /* 0x000 Core 0 Clock control/status */ u8 res1[0x1c]; - u32 clkc1csr; /* Core 1 Clock control/status */ + u32 clkc1csr; /* 0x020 Core 1 Clock control/status */ u8 res2[0x1c]; - u32 clkc2csr; /* Core 2 Clock control/status */ + u32 clkc2csr; /* 0x040 Core 2 Clock control/status */ u8 res3[0x1c]; - u32 clkc3csr; /* Core 3 Clock control/status */ + u32 clkc3csr; /* 0x060 Core 3 Clock control/status */ u8 res4[0x1c]; - u32 clkc4csr; /* Core 4 Clock control/status */ + u32 clkc4csr; /* 0x080 Core 4 Clock control/status */ u8 res5[0x1c]; - u32 clkc5csr; /* Core 5 Clock control/status */ + u32 clkc5csr; /* 0x0a0 Core 5 Clock control/status */ u8 res6[0x1c]; - u32 clkc6csr; /* Core 6 Clock control/status */ + u32 clkc6csr; /* 0x0c0 Core 6 Clock control/status */ u8 res7[0x1c]; - u32 clkc7csr; /* Core 7 Clock control/status */ + u32 clkc7csr; /* 0x0e0 Core 7 Clock control/status */ u8 res8[0x71c]; - u32 pllc1gsr; /* Cluster PLL 1 General Status */ + u32 pllc1gsr; /* 0x800 Cluster PLL 1 General Status */ u8 res10[0x1c]; - u32 pllc2gsr; /* Cluster PLL 2 General Status */ + u32 pllc2gsr; /* 0x820 Cluster PLL 2 General Status */ u8 res11[0x1c]; - u32 pllc3gsr; /* Cluster PLL 3 General Status */ + u32 pllc3gsr; /* 0x840 Cluster PLL 3 General Status */ u8 res12[0x1c]; - u32 pllc4gsr; /* Cluster PLL 4 General Status */ - u8 res13[0x39c]; - u32 pllpgsr; /* Platform PLL General Status */ + u32 pllc4gsr; /* 0x860 Cluster PLL 4 General Status */ + u8 res13[0x1c]; + u32 pllc5gsr; /* 0x880 Cluster PLL 5 General Status */ u8 res14[0x1c]; - u32 plldgsr; /* DDR PLL General Status */ - u8 res15[0x3dc]; + u32 pllc6gsr; /* 0x8a0 Cluster PLL 6 General Status */ + u8 res15[0x35c]; + u32 pllpgsr; /* 0xc00 Platform PLL General Status */ + u8 res16[0x1c]; + u32 plldgsr; /* 0xc20 DDR PLL General Status */ + u8 res17[0x3dc]; } ccsr_clk_t; #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 @@ -2384,6 +2512,78 @@ typedef struct ccsr_gur { #define SDHCDCR_CD_INV 0x80000000 /* invert SDHC card detect */ +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +#define MAX_SERDES 4 +#define SRDS_MAX_LANES 8 +#define SRDS_MAX_BANK 2 +typedef struct serdes_corenet { + struct { + u32 rstctl; /* Reset Control Register */ +#define SRDS_RSTCTL_RST 0x80000000 +#define SRDS_RSTCTL_RSTDONE 0x40000000 +#define SRDS_RSTCTL_RSTERR 0x20000000 +#define SRDS_RSTCTL_SWRST 0x10000000 +#define SRDS_RSTCTL_SDPD 0x00000020 + u32 pllcr0; /* PLL Control Register 0 */ +#define SRDS_PLLCR0_POFF 0x80000000 +#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000 +#define SRDS_PLLCR0_RFCK_SEL_100 0x00000000 +#define SRDS_PLLCR0_RFCK_SEL_125 0x10000000 +#define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000 +#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000 +#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000 +#define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000 +#define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000 +#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000 +#define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000 +#define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000 +#define SRDS_PLLCR0_FRATE_SEL_4 0x00070000 +#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000 +#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000 + u32 pllcr1; /* PLL Control Register 1 */ +#define SRDS_PLLCR1_PLL_BWSEL 0x08000000 + u32 res_0c; /* 0x00c */ + u32 pllcr3; + u32 pllcr4; + u8 res_18[0x20-0x18]; + } bank[2]; + u8 res_40[0x90-0x40]; + u32 srdstcalcr; /* 0x90 TX Calibration Control */ + u8 res_94[0xa0-0x94]; + u32 srdsrcalcr; /* 0xa0 RX Calibration Control */ + u8 res_a4[0xb0-0xa4]; + u32 srdsgr0; /* 0xb0 General Register 0 */ + u8 res_b4[0xe0-0xb4]; + u32 srdspccr0; /* 0xe0 Protocol Converter Config 0 */ + u32 srdspccr1; /* 0xe4 Protocol Converter Config 1 */ + u32 srdspccr2; /* 0xe8 Protocol Converter Config 2 */ + u32 srdspccr3; /* 0xec Protocol Converter Config 3 */ + u32 srdspccr4; /* 0xf0 Protocol Converter Config 4 */ + u8 res_f4[0x100-0xf4]; + struct { + u32 lnpssr; /* 0x100, 0x120, ..., 0x1e0 */ + u8 res_104[0x120-0x104]; + } srdslnpssr[8]; + u8 res_200[0x800-0x200]; + struct { + u32 gcr0; /* 0x800 General Control Register 0 */ + u32 gcr1; /* 0x804 General Control Register 1 */ + u32 gcr2; /* 0x808 General Control Register 2 */ + u32 res_80c; + u32 recr0; /* 0x810 Receive Equalization Control */ + u32 res_814; + u32 tecr0; /* 0x818 Transmit Equalization Control */ + u32 res_81c; + u32 ttlcr0; /* 0x820 Transition Tracking Loop Ctrl 0 */ + u8 res_824[0x840-0x824]; + } lane[8]; /* Lane A, B, C, D, E, F, G, H */ + u8 res_a00[0x1000-0xa00]; /* from 0xa00 to 0xfff */ +} serdes_corenet_t; + +#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ + +#define SRDS_MAX_LANES 18 +#define SRDS_MAX_BANK 3 typedef struct serdes_corenet { struct { u32 rstctl; /* Reset Control Register */ @@ -2392,11 +2592,13 @@ typedef struct serdes_corenet { #define SRDS_RSTCTL_RSTERR 0x20000000 #define SRDS_RSTCTL_SDPD 0x00000020 u32 pllcr0; /* PLL Control Register 0 */ -#define SRDS_PLLCR0_RFCK_SEL_MASK 0x30000000 +#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000 +#define SRDS_PLLCR0_PVCOCNT_EN 0x02000000 #define SRDS_PLLCR0_RFCK_SEL_100 0x00000000 #define SRDS_PLLCR0_RFCK_SEL_125 0x10000000 #define SRDS_PLLCR0_RFCK_SEL_156_25 0x20000000 #define SRDS_PLLCR0_RFCK_SEL_150 0x30000000 +#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000 #define SRDS_PLLCR0_FRATE_SEL_MASK 0x00030000 #define SRDS_PLLCR0_FRATE_SEL_5 0x00000000 #define SRDS_PLLCR0_FRATE_SEL_6_25 0x00010000 @@ -2421,6 +2623,7 @@ typedef struct serdes_corenet { u32 gcr0; /* General Control Register 0 */ #define SRDS_GCR0_RRST 0x00400000 #define SRDS_GCR0_1STLANE 0x00010000 +#define SRDS_GCR0_UOTHL 0x00100000 u32 gcr1; /* General Control Register 1 */ #define SRDS_GCR1_REIDL_CTL_MASK 0x001f0000 #define SRDS_GCR1_REIDL_CTL_PCIE 0x00100000 @@ -2440,6 +2643,7 @@ typedef struct serdes_corenet { } lane[24]; u32 res6[384]; } serdes_corenet_t; +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ enum { FSL_SRDS_B1_LANE_A = 0, @@ -2482,8 +2686,8 @@ typedef struct ccsr_sec { struct { u32 ms; /* DECO LIODN Register, MS */ u32 ls; /* DECO LIODN Register, LS */ - } decoliodnr[5]; - u8 res4[0x58]; + } decoliodnr[8]; + u8 res4[0x40]; u32 dar; /* DECO Avail Register */ u32 drr; /* DECO Reset Register */ u8 res5[0xe78]; @@ -2523,13 +2727,16 @@ typedef struct ccsr_sec { #endif typedef struct ccsr_qman { +#ifdef CONFIG_SYS_FSL_QMAN_V3 + u8 res0[0x200]; +#else struct { u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */ u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */ u32 res; u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg */ } qcsp[32]; - +#endif /* Not actually reserved, but irrelevant to u-boot */ u8 res[0xbf8 - 0x200]; u32 ip_rev_1; @@ -2554,6 +2761,14 @@ typedef struct ccsr_qman { u32 ci_rlm_cfg; /* Initiator Read Latency Monitor Cfg */ u32 ci_rlm_avg; /* Initiator Read Latency Monitor Avg */ u8 res7[0x2e8]; +#ifdef CONFIG_SYS_FSL_QMAN_V3 + struct { + u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */ + u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */ + u32 res; + u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg*/ + } qcsp[50]; +#endif } ccsr_qman_t; typedef struct ccsr_bman { @@ -2617,14 +2832,48 @@ struct ccsr_rman { }; #endif +#ifdef CONFIG_SYS_PMAN +struct ccsr_pman { + u8 res_00[0x40]; + u32 poes1; /* PMAN Operation Error Status Register 1 */ + u32 poes2; /* PMAN Operation Error Status Register 2 */ + u32 poeah; /* PMAN Operation Error Address High */ + u32 poeal; /* PMAN Operation Error Address Low */ + u8 res_50[0x50]; + u32 pr1; /* PMAN Revision Register 1 */ + u32 pr2; /* PMAN Revision Register 2 */ + u8 res_a8[0x8]; + u32 pcap; /* PMAN Capabilities Register */ + u8 res_b4[0xc]; + u32 pc1; /* PMAN Control Register 1 */ + u32 pc2; /* PMAN Control Register 2 */ + u32 pc3; /* PMAN Control Register 3 */ + u32 pc4; /* PMAN Control Register 4 */ + u32 pc5; /* PMAN Control Register 5 */ + u32 pc6; /* PMAN Control Register 6 */ + u8 res_d8[0x8]; + u32 ppa1; /* PMAN Prefetch Attributes Register 1 */ + u32 ppa2; /* PMAN Prefetch Attributes Register 2 */ + u8 res_e8[0x8]; + u32 pics; /* PMAN Interrupt Control and Status */ + u8 res_f4[0xf0c]; +}; +#endif + #ifdef CONFIG_FSL_CORENET #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000 +#ifdef CONFIG_SYS_PMAN +#define CONFIG_SYS_FSL_CORENET_PMAN1_OFFSET 0x4000 +#define CONFIG_SYS_FSL_CORENET_PMAN2_OFFSET 0x5000 +#define CONFIG_SYS_FSL_CORENET_PMAN3_OFFSET 0x6000 +#endif #define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x8000 #define CONFIG_SYS_MPC85xx_DDR2_OFFSET 0x9000 #define CONFIG_SYS_MPC85xx_DDR3_OFFSET 0xA000 #define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000 #define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000 #define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000 +#define CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET 0xEB000 #define CONFIG_SYS_FSL_CPC_OFFSET 0x10000 #define CONFIG_SYS_MPC85xx_DMA1_OFFSET 0x100000 #define CONFIG_SYS_MPC85xx_DMA2_OFFSET 0x101000 @@ -2635,10 +2884,17 @@ struct ccsr_rman { #define CONFIG_SYS_MPC85xx_IFC_OFFSET 0x124000 #define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000 #define CONFIG_SYS_FSL_CORENET_RMAN_OFFSET 0x1e0000 +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x240000 +#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x250000 +#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x260000 +#define CONFIG_SYS_MPC85xx_PCIE4_OFFSET 0x270000 +#else #define CONFIG_SYS_MPC85xx_PCIE1_OFFSET 0x200000 #define CONFIG_SYS_MPC85xx_PCIE2_OFFSET 0x201000 #define CONFIG_SYS_MPC85xx_PCIE3_OFFSET 0x202000 #define CONFIG_SYS_MPC85xx_PCIE4_OFFSET 0x203000 +#endif #define CONFIG_SYS_MPC85xx_USB1_OFFSET 0x210000 #define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x211000 #define CONFIG_SYS_MPC85xx_USB_OFFSET CONFIG_SYS_MPC85xx_USB1_OFFSET @@ -2657,7 +2913,9 @@ struct ccsr_rman { #define CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET 0x48a000 #define CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET 0x48b000 #define CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET 0x48c000 +#define CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET 0x48d000 #define CONFIG_SYS_FSL_FM1_RX0_10G_OFFSET 0x490000 +#define CONFIG_SYS_FSL_FM1_RX1_10G_OFFSET 0x491000 #define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET 0x4e0000 #define CONFIG_SYS_FSL_FM2_OFFSET 0x500000 #define CONFIG_SYS_FSL_FM2_RX0_1G_OFFSET 0x588000 @@ -2665,7 +2923,10 @@ struct ccsr_rman { #define CONFIG_SYS_FSL_FM2_RX2_1G_OFFSET 0x58a000 #define CONFIG_SYS_FSL_FM2_RX3_1G_OFFSET 0x58b000 #define CONFIG_SYS_FSL_FM2_RX4_1G_OFFSET 0x58c000 +#define CONFIG_SYS_FSL_FM2_RX5_1G_OFFSET 0x58d000 #define CONFIG_SYS_FSL_FM2_RX0_10G_OFFSET 0x590000 +#define CONFIG_SYS_FSL_FM2_RX1_10G_OFFSET 0x591000 +#define CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET 0xC20000 #else #define CONFIG_SYS_MPC85xx_ECM_OFFSET 0x0000 #define CONFIG_SYS_MPC85xx_DDR_OFFSET 0x2000 @@ -2775,6 +3036,8 @@ struct ccsr_rman { (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET) #define CONFIG_SYS_FSL_CORENET_SERDES_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET) +#define CONFIG_SYS_FSL_CORENET_SERDES2_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET) #define CONFIG_SYS_MPC85xx_USB_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET) #define CONFIG_SYS_MPC85xx_USB1_PHY_ADDR \ @@ -2808,4 +3071,62 @@ struct ccsr_rman { #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) #define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET) +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 +struct ccsr_cluster_l2 { + u32 l2csr0; /* 0x000 L2 cache control and status register 0 */ + u32 l2csr1; /* 0x004 L2 cache control and status register 1 */ + u32 l2cfg0; /* 0x008 L2 cache configuration register 0 */ + u8 res_0c[500];/* 0x00c - 0x1ff */ + u32 l2pir0; /* 0x200 L2 cache partitioning ID register 0 */ + u8 res_204[4]; + u32 l2par0; /* 0x208 L2 cache partitioning allocation register 0 */ + u32 l2pwr0; /* 0x20c L2 cache partitioning way register 0 */ + u32 l2pir1; /* 0x210 L2 cache partitioning ID register 1 */ + u8 res_214[4]; + u32 l2par1; /* 0x218 L2 cache partitioning allocation register 1 */ + u32 l2pwr1; /* 0x21c L2 cache partitioning way register 1 */ + u32 u2pir2; /* 0x220 L2 cache partitioning ID register 2 */ + u8 res_224[4]; + u32 l2par2; /* 0x228 L2 cache partitioning allocation register 2 */ + u32 l2pwr2; /* 0x22c L2 cache partitioning way register 2 */ + u32 l2pir3; /* 0x230 L2 cache partitioning ID register 3 */ + u8 res_234[4]; + u32 l2par3; /* 0x238 L2 cache partitining allocation register 3 */ + u32 l2pwr3; /* 0x23c L2 cache partitining way register 3 */ + u32 l2pir4; /* 0x240 L2 cache partitioning ID register 3 */ + u8 res244[4]; + u32 l2par4; /* 0x248 L2 cache partitioning allocation register 3 */ + u32 l2pwr4; /* 0x24c L2 cache partitioning way register 3 */ + u32 l2pir5; /* 0x250 L2 cache partitioning ID register 3 */ + u8 res_254[4]; + u32 l2par5; /* 0x258 L2 cache partitioning allocation register 3 */ + u32 l2pwr5; /* 0x25c L2 cache partitioning way register 3 */ + u32 l2pir6; /* 0x260 L2 cache partitioning ID register 3 */ + u8 res_264[4]; + u32 l2par6; /* 0x268 L2 cache partitioning allocation register 3 */ + u32 l2pwr6; /* 0x26c L2 cache partitioning way register 3 */ + u32 l2pir7; /* 0x270 L2 cache partitioning ID register 3 */ + u8 res274[4]; + u32 l2par7; /* 0x278 L2 cache partitioning allocation register 3 */ + u32 l2pwr7; /* 0x27c L2 cache partitioning way register 3 */ + u8 res_280[0xb80]; /* 0x280 - 0xdff */ + u32 l2errinjhi; /* 0xe00 L2 cache error injection mask high */ + u32 l2errinjlo; /* 0xe04 L2 cache error injection mask low */ + u32 l2errinjctl;/* 0xe08 L2 cache error injection control */ + u8 res_e0c[20]; /* 0xe0c - 0x01f */ + u32 l2captdatahi; /* 0xe20 L2 cache error capture data high */ + u32 l2captdatalo; /* 0xe24 L2 cache error capture data low */ + u32 l2captecc; /* 0xe28 L2 cache error capture ECC syndrome */ + u8 res_e2c[20]; /* 0xe2c - 0xe3f */ + u32 l2errdet; /* 0xe40 L2 cache error detect */ + u32 l2errdis; /* 0xe44 L2 cache error disable */ + u32 l2errinten; /* 0xe48 L2 cache error interrupt enable */ + u32 l2errattr; /* 0xe4c L2 cache error attribute */ + u32 l2erreaddr; /* 0xe50 L2 cache error extended address */ + u32 l2erraddr; /* 0xe54 L2 cache error address */ + u32 l2errctl; /* 0xe58 L2 cache error control */ +}; +#define CONFIG_SYS_FSL_CLUSTER_1_L2 \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET) +#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ #endif /*__IMMAP_85xx__*/ diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h index 9be9dca1f7..f0b989a3b0 100644 --- a/arch/powerpc/include/asm/immap_qe.h +++ b/arch/powerpc/include/asm/immap_qe.h @@ -20,7 +20,7 @@ #define QE_MURAM_SIZE 0xc000UL #define MAX_QE_RISC 2 #define QE_NUM_OF_SNUM 28 -#elif defined(CONFIG_MPC832x) +#elif defined(CONFIG_MPC832x) || defined(CONFIG_MPC8309) #define QE_MURAM_SIZE 0x4000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28 diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h index 9e208618d9..1f12c29ba8 100644 --- a/arch/powerpc/include/asm/io.h +++ b/arch/powerpc/include/asm/io.h @@ -127,7 +127,6 @@ static inline void isync(void) /* * Non ordered and non-swapping "raw" accessors */ -#define __iomem #define PCI_FIX_ADDR(addr) (addr) static inline unsigned char __raw_readb(const volatile void __iomem *addr) diff --git a/arch/powerpc/include/asm/mp.h b/arch/powerpc/include/asm/mp.h index fe490bac05..9188ede3f5 100644 --- a/arch/powerpc/include/asm/mp.h +++ b/arch/powerpc/include/asm/mp.h @@ -25,7 +25,7 @@ void setup_mp(void); void cpu_mp_lmb_reserve(struct lmb *lmb); -u32 determine_mp_bootpg(void); +u32 determine_mp_bootpg(unsigned int *pagesize); int is_core_disabled(int nr); #ifdef CONFIG_E6500 diff --git a/arch/powerpc/include/asm/mpc85xx_gpio.h b/arch/powerpc/include/asm/mpc85xx_gpio.h index 5a608a5d0f..2aed5148ef 100644 --- a/arch/powerpc/include/asm/mpc85xx_gpio.h +++ b/arch/powerpc/include/asm/mpc85xx_gpio.h @@ -98,7 +98,10 @@ static inline int gpio_direction_input(unsigned gpio) static inline int gpio_direction_output(unsigned gpio, int value) { - mpc85xx_gpio_set_low(1U << gpio); + if (value) + mpc85xx_gpio_set_high(1U << gpio); + else + mpc85xx_gpio_set_low(1U << gpio); return 0; } diff --git a/arch/powerpc/include/asm/ppc4xx-sdram.h b/arch/powerpc/include/asm/ppc4xx-sdram.h index d570d7915e..e35d9b677a 100644 --- a/arch/powerpc/include/asm/ppc4xx-sdram.h +++ b/arch/powerpc/include/asm/ppc4xx-sdram.h @@ -1404,7 +1404,7 @@ struct sdram_timing { /* * Prototypes */ -inline void ppc4xx_ibm_ddr2_register_dump(void); +void ppc4xx_ibm_ddr2_register_dump(void); u32 mfdcr_any(u32); void mtdcr_any(u32, u32); u32 ddr_wrdtr(u32); diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 36695e2fb6..7aa3231ad4 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1095,6 +1095,17 @@ #define SVR_P4080 0x820000 #define SVR_P5010 0x822100 #define SVR_P5020 0x822000 +#define SVR_P5021 0X820500 +#define SVR_P5040 0x820400 +#define SVR_T4240 0x824000 +#define SVR_T4120 0x824001 +#define SVR_B4860 0X868000 +#define SVR_G4860 0x868001 +#define SVR_G4060 0x868003 +#define SVR_B4440 0x868100 +#define SVR_G4440 0x868101 +#define SVR_B4420 0x868102 +#define SVR_B4220 0x868103 #define SVR_8610 0x80A000 #define SVR_8641 0x809000 diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h index b2fa2b574b..7229a98eaa 100644 --- a/arch/powerpc/include/asm/u-boot.h +++ b/arch/powerpc/include/asm/u-boot.h @@ -81,7 +81,7 @@ typedef struct bd_info { unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ #endif - unsigned long bi_baudrate; /* Console Baudrate */ + unsigned int bi_baudrate; /* Console Baudrate */ #if defined(CONFIG_405) || \ defined(CONFIG_405GP) || \ defined(CONFIG_405CR) || \ diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 965f9ea4a5..808021c42e 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -50,6 +50,7 @@ COBJS-y += cache.o COBJS-y += extable.o COBJS-y += interrupts.o COBJS-$(CONFIG_CMD_KGDB) += kgdb.o +COBJS-${CONFIG_CMD_IDE} += ide.o COBJS-y += time.o # Workaround for local bus unaligned access problems diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index b860141efd..1b051e11c4 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -163,7 +163,7 @@ static int init_baudrate(void) /***********************************************************************/ -void __board_add_ram_info(int use_default) +static void __board_add_ram_info(int use_default) { /* please define platform specific board_add_ram_info() */ } @@ -171,7 +171,7 @@ void __board_add_ram_info(int use_default) void board_add_ram_info(int) __attribute__ ((weak, alias("__board_add_ram_info"))); -int __board_flash_wp_on(void) +static int __board_flash_wp_on(void) { /* * Most flashes can't be detected when write protection is enabled, @@ -184,7 +184,7 @@ int __board_flash_wp_on(void) int board_flash_wp_on(void) __attribute__ ((weak, alias("__board_flash_wp_on"))); -void __cpu_secondary_init_r(void) +static void __cpu_secondary_init_r(void) { } @@ -262,7 +262,7 @@ static int init_func_watchdog_reset(void) * Initialization sequence */ -init_fnc_t *init_sequence[] = { +static init_fnc_t *init_sequence[] = { #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) probecpu, #endif @@ -345,7 +345,7 @@ ulong get_effective_memsize(void) #endif } -int __fixup_cpu(void) +static int __fixup_cpu(void) { return 0; } @@ -402,7 +402,7 @@ void board_init_f(ulong bootflag) #ifdef CONFIG_POST post_bootmode_init(); - post_run(NULL, POST_ROM | post_bootmode_get(0)); + post_run(NULL, POST_ROM | post_bootmode_get(NULL)); #endif WATCHDOG_RESET(); @@ -440,8 +440,8 @@ void board_init_f(ulong bootflag) * We need to make sure the location we intend to put secondary core * boot code is reserved and not used by any part of u-boot */ - if (addr > determine_mp_bootpg()) { - addr = determine_mp_bootpg(); + if (addr > determine_mp_bootpg(NULL)) { + addr = determine_mp_bootpg(NULL); debug("Reserving MP boot page to %08lx\n", addr); } #endif diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c index 53dc4df3fe..ac5bd6d4f1 100644 --- a/arch/powerpc/lib/bootm.c +++ b/arch/powerpc/lib/bootm.c @@ -326,7 +326,7 @@ static int boot_body_linux(bootm_headers_t *images) return 0; } -__attribute__((noinline)) +noinline int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images) { int ret; diff --git a/arch/powerpc/lib/extable.c b/arch/powerpc/lib/extable.c index 7408d5c969..60983aea4c 100644 --- a/arch/powerpc/lib/extable.c +++ b/arch/powerpc/lib/extable.c @@ -63,8 +63,6 @@ search_one_table(const struct exception_table_entry *first, return 0; } -int ex_tab_message = 1; - unsigned long search_exception_table(unsigned long addr) { @@ -74,8 +72,7 @@ search_exception_table(unsigned long addr) ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr); /* if the serial port does not hang in exception, printf can be used */ #if !defined(CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION) - if (ex_tab_message) - debug("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret); + debug("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret); #endif if (ret) return ret; diff --git a/arch/powerpc/lib/ide.c b/arch/powerpc/lib/ide.c new file mode 100644 index 0000000000..139a94a5c1 --- /dev/null +++ b/arch/powerpc/lib/ide.c @@ -0,0 +1,201 @@ +/* + * (C) Copyright 2000-2011 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* Code taken from cmd_ide.c */ +#include <common.h> +#include <ata.h> +#include "ide.h" + +#ifdef CONFIG_IDE_8xx_DIRECT +#include <mpc8xx.h> +#include <pcmcia.h> +DECLARE_GLOBAL_DATA_PTR; + +/* Timings for IDE Interface + * + * SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk + * 70 165 30 PIO-Mode 0, [ns] + * 4 9 2 [Cycles] + * 50 125 20 PIO-Mode 1, [ns] + * 3 7 2 [Cycles] + * 30 100 15 PIO-Mode 2, [ns] + * 2 6 1 [Cycles] + * 30 80 10 PIO-Mode 3, [ns] + * 2 5 1 [Cycles] + * 25 70 10 PIO-Mode 4, [ns] + * 2 4 1 [Cycles] + */ + +static const pio_config_t pio_config_ns[IDE_MAX_PIO_MODE+1] = { + /* Setup Length Hold */ + { 70, 165, 30 }, /* PIO-Mode 0, [ns] */ + { 50, 125, 20 }, /* PIO-Mode 1, [ns] */ + { 30, 101, 15 }, /* PIO-Mode 2, [ns] */ + { 30, 80, 10 }, /* PIO-Mode 3, [ns] */ + { 25, 70, 10 }, /* PIO-Mode 4, [ns] */ +}; + +static pio_config_t pio_config_clk[IDE_MAX_PIO_MODE+1]; + +#ifndef CONFIG_SYS_PIO_MODE +#define CONFIG_SYS_PIO_MODE 0 /* use a relaxed default */ +#endif +static int pio_mode = CONFIG_SYS_PIO_MODE; + +/* Make clock cycles and always round up */ + +#define PCMCIA_MK_CLKS(t, T) (((t) * (T) + 999U) / 1000U) + +static void set_pcmcia_timing(int pmode) +{ + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia); + ulong timings; + + debug("Set timing for PIO Mode %d\n", pmode); + + timings = PCMCIA_SHT(pio_config_clk[pmode].t_hold) + | PCMCIA_SST(pio_config_clk[pmode].t_setup) + | PCMCIA_SL(pio_config_clk[pmode].t_length); + + /* + * IDE 0 + */ + pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_PBR0; +#if (CONFIG_SYS_PCMCIA_POR0 != 0) + pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0 | timings; +#else + pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0; +#endif + debug("PBR0: %08x POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0); + + pcmp->pcmc_pbr1 = CONFIG_SYS_PCMCIA_PBR1; +#if (CONFIG_SYS_PCMCIA_POR1 != 0) + pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1 | timings; +#else + pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1; +#endif + debug("PBR1: %08x POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1); + + pcmp->pcmc_pbr2 = CONFIG_SYS_PCMCIA_PBR2; +#if (CONFIG_SYS_PCMCIA_POR2 != 0) + pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2 | timings; +#else + pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2; +#endif + debug("PBR2: %08x POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2); + + pcmp->pcmc_pbr3 = CONFIG_SYS_PCMCIA_PBR3; +#if (CONFIG_SYS_PCMCIA_POR3 != 0) + pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3 | timings; +#else + pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3; +#endif + debug("PBR3: %08x POR3: %08x\n", pcmp->pcmc_pbr3, pcmp->pcmc_por3); + + /* + * IDE 1 + */ + pcmp->pcmc_pbr4 = CONFIG_SYS_PCMCIA_PBR4; +#if (CONFIG_SYS_PCMCIA_POR4 != 0) + pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4 | timings; +#else + pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4; +#endif + debug("PBR4: %08x POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4); + + pcmp->pcmc_pbr5 = CONFIG_SYS_PCMCIA_PBR5; +#if (CONFIG_SYS_PCMCIA_POR5 != 0) + pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5 | timings; +#else + pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5; +#endif + debug("PBR5: %08x POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5); + + pcmp->pcmc_pbr6 = CONFIG_SYS_PCMCIA_PBR6; +#if (CONFIG_SYS_PCMCIA_POR6 != 0) + pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6 | timings; +#else + pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6; +#endif + debug("PBR6: %08x POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6); + + pcmp->pcmc_pbr7 = CONFIG_SYS_PCMCIA_PBR7; +#if (CONFIG_SYS_PCMCIA_POR7 != 0) + pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7 | timings; +#else + pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7; +#endif + debug("PBR7: %08x POR7: %08x\n", pcmp->pcmc_pbr7, pcmp->pcmc_por7); + +} + +int ide_preinit(void) +{ + int i; + /* Initialize PIO timing tables */ + for (i = 0; i <= IDE_MAX_PIO_MODE; ++i) { + pio_config_clk[i].t_setup = + PCMCIA_MK_CLKS(pio_config_ns[i].t_setup, gd->bus_clk); + pio_config_clk[i].t_length = + PCMCIA_MK_CLKS(pio_config_ns[i].t_length, gd->bus_clk); + pio_config_clk[i].t_hold = + PCMCIA_MK_CLKS(pio_config_ns[i].t_hold, gd->bus_clk); + debug("PIO Mode %d: setup=%2d ns/%d clk" " len=%3d ns/%d clk" + " hold=%2d ns/%d clk\n", i, pio_config_ns[i].t_setup, + pio_config_clk[i].t_setup, pio_config_ns[i].t_length, + pio_config_clk[i].t_length, pio_config_ns[i].t_hold, + pio_config_clk[i].t_hold); + } + + return 0; +} + +int ide_init_postreset(void) +{ + volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia); + + /* PCMCIA / IDE initialization for common mem space */ + pcmp->pcmc_pgcrb = 0; + + /* start in PIO mode 0 - most relaxed timings */ + pio_mode = 0; + set_pcmcia_timing(pio_mode); + return 0; +} +#endif /* CONFIG_IDE_8xx_DIRECT */ + +#ifdef CONFIG_IDE_8xx_PCCARD +int ide_preinit(void) +{ + ide_devices_found = 0; + /* initialize the PCMCIA IDE adapter card */ + pcmcia_on(); + if (!ide_devices_found) + return 1; + udelay(1000000);/* 1 s */ + return 0; +} +#endif diff --git a/arch/arm/include/asm/arch-lpc2292/hardware.h b/arch/powerpc/lib/ide.h index 5e227e367c..9e80702916 100644 --- a/arch/arm/include/asm/arch-lpc2292/hardware.h +++ b/arch/powerpc/lib/ide.h @@ -1,9 +1,6 @@ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - /* - * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) - * Curt Brune <curt@cucy.com> + * (C) Copyright 2012 + * Pavel Herrmann <morpheus.ibis@gmail.com> * * See file CREDITS for list of people who contributed to this * project. @@ -24,10 +21,11 @@ * MA 02111-1307 USA */ -#if defined(CONFIG_LPC2292) -#include <asm/arch-lpc2292/lpc2292_registers.h> -#else -#error No hardware file defined for this configuration -#endif +#ifndef _MPC8XX_IDE_H_ +#define _MPC8XX_IDE_H_ 1 -#endif /* __ASM_ARCH_HARDWARE_H */ +#ifdef CONFIG_IDE_8xx_PCCARD +int pcmcia_on(void); +extern int ide_devices_found; +#endif +#endif diff --git a/arch/sandbox/cpu/u-boot.lds b/arch/sandbox/cpu/u-boot.lds index 99601387cb..1b781ebf6a 100644 --- a/arch/sandbox/cpu/u-boot.lds +++ b/arch/sandbox/cpu/u-boot.lds @@ -24,9 +24,11 @@ SECTIONS { - __u_boot_cmd_start = .; - _u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __u_boot_sandbox_option_start = .; _u_boot_sandbox_getopt : { *(.u_boot_sandbox_getopt) } diff --git a/arch/sandbox/include/asm/global_data.h b/arch/sandbox/include/asm/global_data.h index 581fd2f2a0..78a751d96f 100644 --- a/arch/sandbox/include/asm/global_data.h +++ b/arch/sandbox/include/asm/global_data.h @@ -36,7 +36,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long have_console; /* serial_init() was called */ unsigned long env_addr; /* Address of Environment struct */ unsigned long env_valid; /* Checksum of Environment valid? */ diff --git a/arch/sh/cpu/sh2/u-boot.lds b/arch/sh/cpu/sh2/u-boot.lds index b86a82297f..17f8091ea4 100644 --- a/arch/sh/cpu/sh2/u-boot.lds +++ b/arch/sh/cpu/sh2/u-boot.lds @@ -72,13 +72,10 @@ SECTIONS } PROVIDE (_egot = .); - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); + + .u_boot_list : { + #include <u-boot.lst> } - PROVIDE (__u_boot_cmd_end = .); PROVIDE (reloc_dst_end = .); diff --git a/arch/sh/cpu/sh3/u-boot.lds b/arch/sh/cpu/sh3/u-boot.lds index 9bf8503640..c8319610c2 100644 --- a/arch/sh/cpu/sh3/u-boot.lds +++ b/arch/sh/cpu/sh3/u-boot.lds @@ -78,13 +78,10 @@ SECTIONS } PROVIDE (_egot = .); - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); + + .u_boot_list : { + #include <u-boot.lst> } - PROVIDE (__u_boot_cmd_end = .); PROVIDE (reloc_dst_end = .); /* _reloc_dst_end = .; */ diff --git a/arch/sh/cpu/sh4/u-boot.lds b/arch/sh/cpu/sh4/u-boot.lds index d9c70bce09..0ecafcf5d9 100644 --- a/arch/sh/cpu/sh4/u-boot.lds +++ b/arch/sh/cpu/sh4/u-boot.lds @@ -75,13 +75,10 @@ SECTIONS } PROVIDE (_egot = .); - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); + + .u_boot_list : { + #include <u-boot.lst> } - PROVIDE (__u_boot_cmd_end = .); PROVIDE (reloc_dst_end = .); /* _reloc_dst_end = .; */ diff --git a/arch/sh/include/asm/global_data.h b/arch/sh/include/asm/global_data.h index 6e534ad614..9a2c19376d 100644 --- a/arch/sh/include/asm/global_data.h +++ b/arch/sh/include/asm/global_data.h @@ -31,7 +31,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER diff --git a/arch/sh/include/asm/u-boot.h b/arch/sh/include/asm/u-boot.h index 6c04daf3bc..2c9c4634d8 100644 --- a/arch/sh/include/asm/u-boot.h +++ b/arch/sh/include/asm/u-boot.h @@ -33,7 +33,7 @@ typedef struct bd_info { unsigned long bi_flashoffset; /* reserved area for startup monitor */ unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ - unsigned long bi_baudrate; /* Console Baudrate */ + unsigned int bi_baudrate; /* Console Baudrate */ unsigned long bi_boot_params; /* where this board expects params */ } bd_t; diff --git a/arch/sparc/cpu/leon2/serial.c b/arch/sparc/cpu/leon2/serial.c index 16fffb621d..40d5b01d27 100644 --- a/arch/sparc/cpu/leon2/serial.c +++ b/arch/sparc/cpu/leon2/serial.c @@ -105,13 +105,6 @@ static void leon2_serial_putc(const char c) leon2_serial_putc_raw(c); } -static void leon2_serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - static int leon2_serial_getc(void) { LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS; @@ -172,7 +165,7 @@ static struct serial_device leon2_serial_drv = { .stop = NULL, .setbrg = leon2_serial_setbrg, .putc = leon2_serial_putc, - .puts = leon2_serial_puts, + .puts = default_serial_puts, .getc = leon2_serial_getc, .tstc = leon2_serial_tstc, }; diff --git a/arch/sparc/cpu/leon3/serial.c b/arch/sparc/cpu/leon3/serial.c index c4f3ee83c3..838d4514ee 100644 --- a/arch/sparc/cpu/leon3/serial.c +++ b/arch/sparc/cpu/leon3/serial.c @@ -99,13 +99,6 @@ static void leon3_serial_putc(const char c) leon3_serial_putc_raw(c); } -static void leon3_serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - static int leon3_serial_getc(void) { if (!leon3_apbuart) @@ -146,7 +139,7 @@ static struct serial_device leon3_serial_drv = { .stop = NULL, .setbrg = leon3_serial_setbrg, .putc = leon3_serial_putc, - .puts = leon3_serial_puts, + .puts = default_serial_puts, .getc = leon3_serial_getc, .tstc = leon3_serial_tstc, }; diff --git a/arch/sparc/include/asm/global_data.h b/arch/sparc/include/asm/global_data.h index 93d3cc02eb..aa63b35cab 100644 --- a/arch/sparc/include/asm/global_data.h +++ b/arch/sparc/include/asm/global_data.h @@ -40,7 +40,7 @@ typedef struct global_data { bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long cpu_clk; /* CPU clock in Hz! */ unsigned long bus_clk; diff --git a/arch/sparc/include/asm/u-boot.h b/arch/sparc/include/asm/u-boot.h index 8d011185a0..04c05d4ffe 100644 --- a/arch/sparc/include/asm/u-boot.h +++ b/arch/sparc/include/asm/u-boot.h @@ -54,7 +54,7 @@ typedef struct bd_info { unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ unsigned long bi_busfreq; /* Bus Freq, in MHz */ - unsigned long bi_baudrate; /* Console Baudrate */ + unsigned int bi_baudrate; /* Console Baudrate */ } bd_t; #endif /* __ASSEMBLY__ */ diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c index ff0e0f2fd0..32d025a342 100644 --- a/arch/sparc/lib/board.c +++ b/arch/sparc/lib/board.c @@ -246,8 +246,8 @@ void board_init_f(ulong bootflag) /* * We have to relocate the command table manually */ - fixup_cmdtable(&__u_boot_cmd_start, - (ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start)); + fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd), + ll_entry_count(cmd_tbl_t, cmd)); #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ #if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP) diff --git a/arch/x86/cpu/u-boot.lds b/arch/x86/cpu/u-boot.lds index fe28030d84..a1ecefafc6 100644 --- a/arch/x86/cpu/u-boot.lds +++ b/arch/x86/cpu/u-boot.lds @@ -33,10 +33,11 @@ SECTIONS .text : { *(.text*); } . = ALIGN(4); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h index 6d29c0b9a3..bce999f41c 100644 --- a/arch/x86/include/asm/global_data.h +++ b/arch/x86/include/asm/global_data.h @@ -38,7 +38,7 @@ typedef struct global_data { unsigned long gd_addr; /* Location of Global Data */ bd_t *bd; unsigned long flags; - unsigned long baudrate; + unsigned int baudrate; unsigned long have_console; /* serial_init() was called */ #ifdef CONFIG_PRE_CONSOLE_BUFFER unsigned long precon_buf_idx; /* Pre-Console buffer index */ diff --git a/board/westel/amx860/Makefile b/board/8dtech/eco5pk/Makefile index 12e4aa6880..befe60aac0 100644 --- a/board/westel/amx860/Makefile +++ b/board/8dtech/eco5pk/Makefile @@ -1,7 +1,9 @@ # -# (C) Copyright 2001-2006 +# (C) Copyright 2000, 2001, 2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # +# Adapted from ti/evm/Makefile +# # See file CREDITS for list of people who contributed to this # project. # @@ -25,11 +27,10 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS = $(BOARD).o flash.o +COBJS := eco5pk.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) @@ -40,5 +41,3 @@ $(LIB): $(obj).depend $(OBJS) include $(SRCTREE)/rules.mk sinclude $(obj).depend - -######################################################################### diff --git a/board/8dtech/eco5pk/eco5pk.c b/board/8dtech/eco5pk/eco5pk.c new file mode 100644 index 0000000000..cdb5b6f67d --- /dev/null +++ b/board/8dtech/eco5pk/eco5pk.c @@ -0,0 +1,61 @@ +/* + * eco5pk.c - board file for 8D Technology's AM3517 based eco5pk board + * + * Based on am3517evm.c + * + * Copyright (C) 2011-2012 8D Technologies inc. + * Copyright (C) 2009 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <common.h> +#include <netdev.h> +#include <asm/io.h> +#include <asm/arch/mem.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/emac_defs.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <crc.h> +#include <asm/mach-types.h> +#include "eco5pk.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + gpio_request(30, "RESOUT"); + gpio_direction_output(30, 1); + return 0; +} + +/* + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + */ +void set_muxconf_regs(void) +{ + MUX_ECO5_PK(); +} diff --git a/board/8dtech/eco5pk/eco5pk.h b/board/8dtech/eco5pk/eco5pk.h new file mode 100644 index 0000000000..d289e2bf1d --- /dev/null +++ b/board/8dtech/eco5pk/eco5pk.h @@ -0,0 +1,404 @@ +/* + * eco5.h - Header file for the 8D Technologies ECO5 board. + * + * Based on am3517evm.h + * Based on ti/evm/evm.h + * + * Copyright (C) 2011 8D Technologies inc. + * Copyright (C) 2009 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _ECO5PK_H__ +#define _ECO5PK_H__ + +const omap3_sysinfo sysinfo = { + DDR_DISCRETE, + "ECO5 Board", + "NAND", +}; + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_ECO5_PK() \ + /* SDRC */\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SDRC_DQS0N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_DQS1N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_DQS2N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_DQS3N), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SDRC_CKE0), (M0)) \ + MUX_VAL(CP(SDRC_CKE1), (M0)) \ + MUX_VAL(CP(STRBEN_DLY0), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(STRBEN_DLY1), (IEN | PTD | EN | M0)) \ + /* GPMC */\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | DIS | M3)) \ + MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | DIS | M4)) \ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) \ + /* - ETH_nRESET*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) \ + /* DSS */\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA0), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA1), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA2), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA3), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA4), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA5), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA6), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA7), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | EN | M4)) \ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | EN | M4)) \ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | EN | M4)) \ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \ + /* CAMERA */\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ + /* - CAM_RESET*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) \ + /* MMC */\ + MUX_VAL(CP(MMC1_CLK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \ + \ + MUX_VAL(CP(MMC2_CLK), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(MMC2_CMD), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTD | DIS | M0)) \ + /* McBSP */\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_FSX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /* LED ACT */ \ + \ + MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_152*/\ + /* - LCD_INI*/\ + MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) /*GPIO_153*/\ + /* - LCD_ENVDD */\ + MUX_VAL(CP(MCBSP4_DX), (IDIS | PTD | DIS | M4)) /*GPIO_154*/\ + /* - LCD_QVGA/nVGA */\ + MUX_VAL(CP(MCBSP4_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_155*/\ + /* - LCD_RESB */\ + /* UART */\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) \ + \ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \ + \ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | DIS | M0)) \ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) \ + /* I2C */\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \ + /* McSPI */\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(MCSPI1_CS1), (IEN | PTD | EN | M4)) /*GPIO_175*/\ + MUX_VAL(CP(MCSPI1_CS2), (IEN | PTU | DIS | M4)) /*GPIO_176*/\ + /* - LAN_INTR*/\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)) \ + \ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \ + /* LCD_EN_BACKLIGHT */\ + MUX_VAL(CP(MCSPI2_CS1), (IDIS | PTD | EN | M4)) \ + /* CCDC */\ + MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M1)) \ + MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M1)) \ + MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M0)) \ + /* RMII */\ + MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \ + MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \ + MUX_VAL(CP(RMII_RXD0) , (IEN | PTD | M0)) \ + MUX_VAL(CP(RMII_RXD1), (IEN | PTD | M0)) \ + MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | M0)) \ + MUX_VAL(CP(RMII_RXER), (PTD | M0)) \ + MUX_VAL(CP(RMII_TXD0), (PTD | M0)) \ + MUX_VAL(CP(RMII_TXD1), (PTD | M0)) \ + MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \ + MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \ + /* HECC */\ + MUX_VAL(CP(HECC1_TXD), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(HECC1_RXD), (IEN | PTU | EN | M0)) \ + /* HSUSB */\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0)) \ + /* HDQ */\ + MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M0)) \ + /* Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) \ + /* SYS_nRESWARM */\ + MUX_VAL(CP(SYS_NRESWARM), (IDIS | PTU | DIS | M4)) \ + /* - GPIO30 */\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /* GPIO_2 */\ + /* - PEN_IRQ */\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /* GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /* GPIO_5 */\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /* GPIO_6 */\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /* GPIO_7 */\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /* GPIO_8 */\ + /* - VIO_1V8*/\ + MUX_VAL(CP(SYS_BOOT7), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \ + \ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \ + /* JTAG */\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) \ + /* ETK (ES2 onwards) */\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)) \ + /* Die to Die */\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) + +#endif diff --git a/board/BuS/eb_cpu5282/u-boot.lds b/board/BuS/eb_cpu5282/u-boot.lds index 4ba1964f7e..0c92d31f61 100644 --- a/board/BuS/eb_cpu5282/u-boot.lds +++ b/board/BuS/eb_cpu5282/u-boot.lds @@ -65,9 +65,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds index 5aaf6b309d..2bb876d689 100644 --- a/board/LEOX/elpt860/u-boot.lds +++ b/board/LEOX/elpt860/u-boot.lds @@ -86,9 +86,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c index 1327c62a75..4a780c3746 100644 --- a/board/Marvell/common/serial.c +++ b/board/Marvell/common/serial.c @@ -139,20 +139,13 @@ static void marvell_serial_setbrg(void) #endif /* CONFIG_MPSC */ -static void marvell_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device marvell_serial_drv = { .name = "marvell_serial", .start = marvell_serial_init, .stop = NULL, .setbrg = marvell_serial_setbrg, .putc = marvell_serial_putc, - .puts = marvell_serial_puts, + .puts = default_serial_puts, .getc = marvell_serial_getc, .tstc = marvell_serial_tstc, }; diff --git a/board/RPXClassic/u-boot.lds b/board/RPXClassic/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/RPXClassic/u-boot.lds +++ b/board/RPXClassic/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/RPXClassic/u-boot.lds.debug b/board/RPXClassic/u-boot.lds.debug index 99c48f28d4..dc8c4e958f 100644 --- a/board/RPXClassic/u-boot.lds.debug +++ b/board/RPXClassic/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/RPXlite/u-boot.lds b/board/RPXlite/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/RPXlite/u-boot.lds +++ b/board/RPXlite/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/RPXlite/u-boot.lds.debug b/board/RPXlite/u-boot.lds.debug index 99c48f28d4..dc8c4e958f 100644 --- a/board/RPXlite/u-boot.lds.debug +++ b/board/RPXlite/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/RPXlite_dw/u-boot.lds b/board/RPXlite_dw/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/RPXlite_dw/u-boot.lds +++ b/board/RPXlite_dw/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/RPXlite_dw/u-boot.lds.debug b/board/RPXlite_dw/u-boot.lds.debug index 4491edd944..b43a1e4281 100644 --- a/board/RPXlite_dw/u-boot.lds.debug +++ b/board/RPXlite_dw/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/RRvision/u-boot.lds b/board/RRvision/u-boot.lds index 838537375b..748e5113ef 100644 --- a/board/RRvision/u-boot.lds +++ b/board/RRvision/u-boot.lds @@ -71,9 +71,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds index 9dbaa6faf6..c41eed0e6f 100644 --- a/board/actux1/u-boot.lds +++ b/board/actux1/u-boot.lds @@ -34,7 +34,7 @@ SECTIONS net/libnet.o(.text*) board/actux1/libactux1.o(.text*) arch/arm/cpu/ixp/libixp.o(.text*) - drivers/serial/libserial.o(.text*) + drivers/input/libinput.o(.text*) . = env_offset; common/env_embedded.o(.ppcenv) @@ -54,11 +54,11 @@ SECTIONS *(.got) } . =.; - __u_boot_cmd_start =.; - .u_boot_cmd : { - *(.u_boot_cmd) + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> } - __u_boot_cmd_end =.; . = ALIGN (4); .rel.dyn : { diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds index 3575ed99fc..84099840b5 100644 --- a/board/actux2/u-boot.lds +++ b/board/actux2/u-boot.lds @@ -34,7 +34,7 @@ SECTIONS net/libnet.o(.text*) board/actux2/libactux2.o(.text*) arch/arm/cpu/ixp/libixp.o(.text*) - drivers/serial/libserial.o(.text*) + drivers/input/libinput.o(.text*) . = env_offset; common/env_embedded.o(.ppcenv) @@ -54,11 +54,11 @@ SECTIONS *(.got) } . =.; - __u_boot_cmd_start =.; - .u_boot_cmd : { - *(.u_boot_cmd) + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> } - __u_boot_cmd_end =.; . = ALIGN (4); .rel.dyn : { diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds index 35aab29d40..a3bd02b0d2 100644 --- a/board/actux3/u-boot.lds +++ b/board/actux3/u-boot.lds @@ -34,7 +34,7 @@ SECTIONS net/libnet.o(.text*) board/actux3/libactux3.o(.text*) arch/arm/cpu/ixp/libixp.o(.text*) - drivers/serial/libserial.o(.text*) + drivers/input/libinput.o(.text*) . = env_offset; common/env_embedded.o(.ppcenv) @@ -54,11 +54,11 @@ SECTIONS *(.got) } . =.; - __u_boot_cmd_start =.; - .u_boot_cmd : { - *(.u_boot_cmd) + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> } - __u_boot_cmd_end =.; . = ALIGN (4); .rel.dyn : { diff --git a/board/adder/u-boot.lds b/board/adder/u-boot.lds index a7627699e7..73e2f3f9cf 100644 --- a/board/adder/u-boot.lds +++ b/board/adder/u-boot.lds @@ -62,9 +62,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/ait/cam_enc_4xx/u-boot-spl.lds b/board/ait/cam_enc_4xx/u-boot-spl.lds index 52c986e8a9..656b2fbf89 100644 --- a/board/ait/cam_enc_4xx/u-boot-spl.lds +++ b/board/ait/cam_enc_4xx/u-boot-spl.lds @@ -48,6 +48,10 @@ SECTIONS . = ALIGN(4); .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } >.sram + . = ALIGN(4); .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/board/altera/nios2-generic/u-boot.lds b/board/altera/nios2-generic/u-boot.lds index 88ced629ec..289386b35c 100644 --- a/board/altera/nios2-generic/u-boot.lds +++ b/board/altera/nios2-generic/u-boot.lds @@ -46,13 +46,11 @@ SECTIONS * the initialization code relocates the command table as * well -- admittedly, this is just pure laziness ;-) */ - __u_boot_cmd_start = .; - .u_boot_cmd : - { - *(.u_boot_cmd) - } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } /* INIT DATA sections - "Small" data (see the gcc -G option) * is always gp-relative. Here we make all init data sections diff --git a/board/amcc/acadia/u-boot-nand.lds b/board/amcc/acadia/u-boot-nand.lds index ab67de2f76..beba978f83 100644 --- a/board/amcc/acadia/u-boot-nand.lds +++ b/board/amcc/acadia/u-boot-nand.lds @@ -72,10 +72,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/amcc/bamboo/u-boot-nand.lds b/board/amcc/bamboo/u-boot-nand.lds index 3ad87095a1..2dd00d7f42 100644 --- a/board/amcc/bamboo/u-boot-nand.lds +++ b/board/amcc/bamboo/u-boot-nand.lds @@ -73,10 +73,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/amcc/canyonlands/u-boot-nand.lds b/board/amcc/canyonlands/u-boot-nand.lds index 76f89f188d..8ac5116296 100644 --- a/board/amcc/canyonlands/u-boot-nand.lds +++ b/board/amcc/canyonlands/u-boot-nand.lds @@ -73,10 +73,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/amcc/kilauea/u-boot-nand.lds b/board/amcc/kilauea/u-boot-nand.lds index ab67de2f76..beba978f83 100644 --- a/board/amcc/kilauea/u-boot-nand.lds +++ b/board/amcc/kilauea/u-boot-nand.lds @@ -72,10 +72,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds index 07ae8b1291..18266efd09 100644 --- a/board/amcc/sequoia/u-boot-nand.lds +++ b/board/amcc/sequoia/u-boot-nand.lds @@ -73,10 +73,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/amcc/sequoia/u-boot-ram.lds b/board/amcc/sequoia/u-boot-ram.lds index 423400ac66..6b02784926 100644 --- a/board/amcc/sequoia/u-boot-ram.lds +++ b/board/amcc/sequoia/u-boot-ram.lds @@ -64,10 +64,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/astro/mcf5373l/u-boot.lds b/board/astro/mcf5373l/u-boot.lds index a1d8e0f6dc..bc40fd649d 100644 --- a/board/astro/mcf5373l/u-boot.lds +++ b/board/astro/mcf5373l/u-boot.lds @@ -22,51 +22,18 @@ */ OUTPUT_ARCH(m68k) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ + SECTIONS { /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } .text : { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/m68k/cpu/mcf532x/start.o (.text) - arch/m68k/lib/traps.o (.text) - arch/m68k/lib/interrupts.o (.text) - common/dlmalloc.o (.text) - lib/zlib.o (.text) + arch/m68k/cpu/mcf532x/start.o (.text*) . = DEFINED(env_offset) ? env_offset : .; - common/env_embedded.o (.text) + common/env_embedded.o (.text*) - *(.text) -/* *(.fixup)*/ - *(.got1) + *(.text*) } _etext = .; PROVIDE (etext = .); @@ -74,9 +41,6 @@ SECTIONS { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } /* Read-write section, merged into data segment: */ . = (. + 0x00FF) & 0xFFFFFF00; @@ -86,33 +50,30 @@ SECTIONS .reloc : { __got_start = .; - *(.got) + KEEP(*(.got)) __got_end = .; _GOT2_TABLE_ = .; - *(.got2) + KEEP(*(.got2)) _FIXUP_TABLE_ = .; - *(.fixup) + KEEP(*(.fixup)) } __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS + *(.data*) + *(.sdata*) } _edata = .; PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; @@ -130,9 +91,8 @@ SECTIONS .bss : { _sbss = .; - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) + *(.sbss*) + *(.bss*) *(COMMON) . = ALIGN(4); _ebss = .; diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c index 06028aa01e..edb088680d 100644 --- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c @@ -31,6 +31,7 @@ #include <asm/arch/clk.h> #include <lcd.h> #include <atmel_hlcdc.h> +#include <atmel_mci.h> #ifdef CONFIG_MACB #include <net.h> #endif @@ -258,6 +259,15 @@ void spi_cs_deactivate(struct spi_slave *slave) } #endif /* CONFIG_ATMEL_SPI */ +#ifdef CONFIG_GENERIC_ATMEL_MCI +int board_mmc_init(bd_t *bd) +{ + at91_mci_hw_init(); + + return atmel_mci_init((void *)ATMEL_BASE_HSMCI0); +} +#endif + int board_early_init_f(void) { at91_seriald_hw_init(); diff --git a/board/avionic-design/medcom-wide/Makefile b/board/avionic-design/medcom-wide/Makefile index 864bc0ec01..e8c1e8b287 100644 --- a/board/avionic-design/medcom-wide/Makefile +++ b/board/avionic-design/medcom-wide/Makefile @@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := ../../nvidia/common/board.o -COBJS += ../common/tamonten.o +COBJS-y := ../common/tamonten.o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/avionic-design/plutux/Makefile b/board/avionic-design/plutux/Makefile index 864bc0ec01..e8c1e8b287 100644 --- a/board/avionic-design/plutux/Makefile +++ b/board/avionic-design/plutux/Makefile @@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := ../../nvidia/common/board.o -COBJS += ../common/tamonten.o +COBJS-y := ../common/tamonten.o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/avionic-design/tec/Makefile b/board/avionic-design/tec/Makefile index 864bc0ec01..e8c1e8b287 100644 --- a/board/avionic-design/tec/Makefile +++ b/board/avionic-design/tec/Makefile @@ -29,9 +29,11 @@ $(shell mkdir -p $(obj)../common $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := ../../nvidia/common/board.o -COBJS += ../common/tamonten.o +COBJS-y := ../common/tamonten.o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/bmw/Makefile b/board/bmw/Makefile deleted file mode 100644 index 4f88efafd4..0000000000 --- a/board/bmw/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2002 -# James F. Dougherty, Broadcom Corporation, jfd@broadcom.com -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS = $(BOARD).o flash.o ns16550.o serial.o m48t59y.o - -SOBJS = early_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/bmw/README b/board/bmw/README deleted file mode 100644 index 1fbef79e64..0000000000 --- a/board/bmw/README +++ /dev/null @@ -1,331 +0,0 @@ -Broadcom 95xx BMW CPCI Platform - -Overview -========= -BMW is an MPC8245 system controller featuring: -* 3U CPCI Form Factor -* BCM5703 Gigabit Ethernet -* M48T59Y NVRAM -* 16MB DOC -* DIP Socket for Socketed DOC up to 1GB -* 64MB SDRAM -* LCD Display -* Configurable Jumper options for 66,85, and 100Mhz memory bus - - -BMW System Address Map -====================== -BMW uses the MPC8245 CHRP Address MAP B found in the MPC8245 Users Manual -(P.121, Section 3.1 Address Maps, Address Map B). Other I/O devices found -onboard the processor module are listed briefly below: - -0x00000000 - 0x40000000 - 64MB SDRAM SIMM - (Unregistered PC-100 SDRAM DIMM Module) - -0xFF000000 - 0xFF001FFF - M-Systems DiskOnChip (TM) 2000 - TSOP 16MB (MD2211-D16-V3) - -0x70000000 - 0x70001FFF - M-Systems DiskOnChip (TM) 2000 - DIP32 (Socketed 16MB - 1GB ) * - NOTE: this is not populated on all systems. - -0x7c000000 - 0x7c000000 - Reset Register - (Write 0 to reset) - -0x7c000001 - 0x7c000001 - System LED - (Clear Bit 7 to turn on, set to shut off) - -0x7c000002 - 0x7c000002 - M48T59 Watchdog IRQ3 - (Clear bit 7 to reset, set to assert IRQ3) - -0x7c000003 - 0x7c000003 - M48T59 Write-Protect Register - (Clear bit 7 to make R/W, set to make R/O) - -0x7c002000 - 0x7c002003 - Infineon OSRAM DLR2416 4 Character - 5x7 Dot Matrix Alphanumeric Display - (Each byte sets the appropriate character) - -0x7c004000 - 0x7c005FF0 - SGS-THOMSON M48T59Y 8K NVRAM/RTC - NVRAM Memory Region - -0x7c005FF0 - 0x7c005FFF - SGS-THOMSON M48T59Y 8K NVRAM/RTC - Realtime Clock Registers - -0xFFF00000 - 0xFFF80000 - 512K PLCC32 BootRom - (AMD AM29F040, ST 29W040B) - -0xFFF00100 - System Reset Vector - - -IO/MMU (BAT) Configuration -====================== -The following Block-Address-Translation (BAT) configuration -is recommended to access all I/O devices. - -#define CONFIG_SYS_IBAT0L (0x00000000 | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (0x00000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT1L (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - - -Interrupt Mappings -====================== -BMW uses MPC8245 discrete mode interrupts. With the following -hardwired mappings: - -BCM5701 10/100/1000 Ethernet IRQ1 -CompactPCI Interrupt A IRQ2 -RTC/Watchdog Interrupt IRQ3 -Internal NS16552 UART IRQ4 - - -Jumper Settings -====================== - -BMW has a jumper (JP600) for selecting 66, 85, or 100Mhz memory bus. -A jumper (X) is a 0 bit. - -Hence 66= 10110 - 85= 11000 - 100= 10000 - -Jumper Settings for various Speeds -======================= -J1 J2 J3 J4 J5 - X X 66Mhz -======================= -J1 J2 J3 J4 J5 - X X X 85Mhz -======================= -J1 J2 J3 J4 J5 - X X X X 100Mhz -======================= - -Obviously, 100Mhz memory bus is recommended for optimum performance. - - -U-Boot -=============== -Broadcom BMW board is supported under config_BWM option. -Supported features: - -- NVRAM setenv/getenv (used by Linux Kernel for configuration variables) -- BCM570x TFTP file transfer support -- LCD Display Support -- DOC Support - (underway) - - -U-Boot 1.2.0 (Aug 6 2002 - 17:44:48) - -CPU: MPC8245 Revision 16.20 at 264 MHz: 16 kB I-Cache 16 kB D-Cache -Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B) -Built: Aug 6 2002 at 17:44:37 -Local Bus at 66 MHz -DRAM: 64 MB -FLASH: 4095 MB -In: serial -Out: serial -Err: serial -DOC: No DiskOnChip found -Hit any key to stop autoboot: 0 -=>printenv -bootdelay=5 -baudrate=9600 -clocks_in_mhz=1 -hostname=switch-2 -bootcmd=tftp 100000 vmlinux.img;bootm -gateway=10.16.64.1 -ethaddr=00:00:10:18:10:10 -nfsroot=172.16.40.111:/boot/root-fs -filesize=5ec8c -netmask=255.255.240.0 -ipaddr=172.16.40.114 -serverip=172.16.40.111 -root=/dev/nfs -stdin=serial -stdout=serial -stderr=serial - -Environment size: 315/8172 bytes -=>boot - - -DevTools -======== -ELDK - DENX Embedded Linux Development Kit - -ROM Emulator - Grammar Engine PROMICE P1160-90-AI21E (2MBx8bit, 90ns access time) - Grammar Engine PL32E 32Pin PLCC Emulation cables - Grammar Engine 3VA8CON (3Volt adapter with Short cables) - Grammar Engine FPNET PromICE Ethernet Adapters - -ICE - WRS/EST VisionICE-II (PPC8240) - - -=>reset - - -U-Boot 1.2.0 (Aug 6 2002 - 17:44:48) - -CPU: MPC8245 Revision 16.20 at 264 MHz: 16 kB I-Cache 16 kB D-Cache -Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B) -Built: Aug 6 2002 at 17:44:37 -Local Bus at 66 MHz -DRAM: 64 MB -FLASH: 4095 MB -In: serial -Out: serial -Err: serial -DOC: No DiskOnChip found -Hit any key to stop autoboot: 0 - -Broadcom BCM5701 1000Base-T: bus 0, device 13, function 0: MBAR=0x80100000 -BCM570x PCI Memory base address @0x80100000 -eth0:Broadcom BCM5701 1000Base-T: 100 Mbps half duplex link up, flow control OFF -eth0: Broadcom BCM5701 1000Base-T @0x80100000,node addr 000010181010 -eth0: BCM5700 with Broadcom BCM5701 Integrated Copper transceiver found -eth0: 32-bit PCI 33MHz, MTU: 1500,Rx Checksum ON -ARP broadcast 1 -TFTP from server 172.16.40.111; our IP address is 172.16.40.114 -Filename 'vmlinux.img'. -Load address: 0x100000 -Loading: ################################################################# - ####################################T ############################# - ###################### -done -Bytes transferred = 777199 (bdbef hex) - -eth0:Broadcom BCM5701 1000Base-T,HALT,POWER DOWN,done - offline. -## Booting image at 00100000 ... - Image Name: vmlinux.bin.gz - Created: 2002-08-06 6:30:13 UTC - Image Type: PowerPC Linux Kernel Image (gzip compressed) - Data Size: 777135 Bytes = 758 kB = 0 MB - Load Address: 00000000 - Entry Point: 00000000 - Verifying Checksum ... OK - Uncompressing Kernel Image ... OK -Memory BAT mapping: BAT2=64Mb, BAT3=0Mb, residual: 0Mb -Linux version 2.4.19-rc3 (jfd@que) (gcc version 2.95.3 20010111 (prerelease/franzo/20010111)) #168 Mon Aug 5 23:29:20 PDT 2002 -CPU:82xx: 32 I-Cache Block Size, 32 D-Cache Block Size PVR: 0x810000 -U-Boot Environment: 0xc01b08f0 -IP PNP: 802.3 Ethernet Address=<0:0:10:18:10:10> -cpu0: MPC8245/KAHLUA-II : BMW Platform : 64MB RAM: BPLD Rev. 6e -NOTICE: mounting root file system via NFS -IP PNP: switch-2: eth0 IP 172.16.40.114/255.255.240.0 gateway 10.16.64.1 server 172.16.40.111 -On node 0 totalpages: 16384 -zone(0): 16384 pages. -zone(1): 0 pages. -zone(2): 0 pages. -Kernel command line: console=ttyS0,9600 ip=172.16.40.114:172.16.40.111:10.16.64.1:255.255.240.0:switch-2:eth0 root=/dev/nfs rw nfsroot=172.16.40.111:/boot/root-fs,timeo=200,retrans=500 nfsaddrs=172.16.40.114:172.16.40.111 -root_dev_setup:/dev/nfs or 00:ff -time_init: decrementer frequency = 16.501145 MHz -Calibrating delay loop... 175.71 BogoMIPS -Memory: 62572k available (1396k kernel code, 436k data, 100k init, 0k highmem) -Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) -Inode cache hash table entries: 4096 (order: 3, 32768 bytes) -Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) -Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) -Page-cache hash table entries: 16384 (order: 4, 65536 bytes) -POSIX conformance testing by UNIFIX -PCI: Probing PCI hardware -Linux NET4.0 for Linux 2.4 -Based upon Swansea University Computer Society NET3.039 -Initializing RT netlink socket -Starting kswapd -devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) -devfs: devfs_debug: 0x0 -devfs: boot_options: 0x1 -Installing knfsd (copyright (C) 1996 okir@monad.swb.de). -pty: 256 Unix98 ptys configured -Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled -Testing ttyS0 (0xf7f51500, 0xf7f51500)... -Testing ttyS1 (0xfc004600, 0xfc004600)... -ttyS00 at 0xf7f51500 (irq = 24) is a ST16650 -ttyS01 at 0xfc004600 (irq = 25) is a 16550A -Real Time Clock Driver v1.10e -RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize -loop: loaded (max 8 devices) -TFFS 5.1.1 Flash disk driver for DiskOnChip -Copyright (C) 1998,2001 M-Systems Flash Disk Pioneers Ltd. -DOC device(s) found: 1 -fl_init: registered device at major: 100 -fl_geninit: registered device at major: 100 -Partition check: - fla: p1 -partition: /dev/fl/0: start_sect: 0,nr_sects: 32000 Fl_blk_size[]: 16000KB -partition: /dev/fl/1: start_sect: 2,nr_sects: 31998 Fl_blk_size[]: 15999KB -partition: /dev/fl/2: start_sect: 0,nr_sects: 0 Fl_blk_size[]: 0KB -partition: /dev/fl/3: start_sect: 0,nr_sects: 0 Fl_blk_size[]: 0KB -Broadcom Gigabit Ethernet Driver bcm5700 ver. 3.0.7 (07/17/02) -eth0: Broadcom BCM5701 found at mem bfff0000, IRQ 1, node addr 000010181010 -eth0: Broadcom BCM5701 Integrated Copper transceiver found -eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON -bond0 registered without MII link monitoring, in bonding mode. -rtc: unable to get misc minor -NET4: Linux TCP/IP 1.0 for NET4.0 -IP Protocols: ICMP, UDP, TCP, IGMP -IP: routing cache hash table of 512 buckets, 4Kbytes -TCP: Hash tables configured (established 4096 bind 4096) -bcm5700: eth0 NIC Link is UP, 100 Mbps half duplex -IP-Config: Gateway not on directly connected network. -NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. -802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com> -All bugs added by David S. Miller <davem@redhat.com> -Looking up port of RPC 100003/2 on 172.16.40.111 -Looking up port of RPC 100005/1 on 172.16.40.111 -VFS: Mounted root (nfs filesystem). -Mounted devfs on /dev -Freeing unused kernel memory: 100k init -INIT: version 2.78 booting -Mounting local filesystems... -not mounted anything -Setting up symlinks in /dev...done. -Setting up extra devices in /dev...done. -Starting devfsd...Started device management daemon for /dev -INIT: Entering runlevel: 2 -Starting internet superserver: inetd. - - -Welcome to Linux/PPC -MPC8245/BMW - - -switch-2 login: root -Password: -PAM_unix[49]: (login) session opened for user root by LOGIN(uid=0) -Last login: Thu Nov 25 11:51:14 1920 on console - - -Welcome to Linux/PPC -MPC8245/BMW - - -login[49]: ROOT LOGIN on `console' - -root@switch-2:~# cat /proc/cpuinfo -cpu : 82xx -revision : 16.20 (pvr 8081 1014) -bogomips : 175.71 -vendor : Broadcom -machine : BMW/MPC8245 -root@switch-2:~# diff --git a/board/bmw/bmw.c b/board/bmw/bmw.c deleted file mode 100644 index 5ba6c09d1c..0000000000 --- a/board/bmw/bmw.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * (C) Copyright 2002 - * James F. Dougherty, Broadcom Corporation, jfd@broadcom.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <watchdog.h> -#include <command.h> -#include <malloc.h> -#include <stdio_dev.h> -#include <net.h> -#include <timestamp.h> -#include <dtt.h> -#include <mpc824x.h> -#include <asm/processor.h> -#include <linux/mtd/doc2000.h> - -#include "bmw.h" -#include "m48t59y.h" -#include <pci.h> - - -int checkboard(void) -{ - ulong busfreq = get_bus_freq(0); - char buf[32]; - - puts ("Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B)\n"); - printf("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME); - /* printf("MPLD: Revision %d\n", SYS_REVID_GET()); */ - printf("Local Bus at %s MHz\n", strmhz(buf, busfreq)); - return 0; -} - -phys_size_t initdram(int board_type) -{ - return 64*1024*1024; -} - - -void -get_tod(void) -{ - int year, month, day, hour, minute, second; - - m48_tod_get(&year, - &month, - &day, - &hour, - &minute, - &second); - - printf(" Current date/time: %d/%d/%d %d:%d:%d \n", - month, day, year, hour, minute, second); - -} - -/* - * EPIC, PCI, and I/O devices. - * Initialize Mousse Platform, probe for PCI devices, - * Query configuration parameters if not set. - */ -int misc_init_f (void) -{ -#if 0 - m48_tod_init(); /* Init SGS M48T59Y TOD/NVRAM */ - printf("RTC: M48T589 TOD/NVRAM (%d) bytes\n", - TOD_NVRAM_SIZE); - get_tod(); -#endif - - sys_led_msg("BOOT"); - return 0; -} - - -/* - * Initialize PCI Devices, report devices found. - */ -struct pci_controller hose; - -void pci_init_board (void) -{ - pci_mpc824x_init(&hose); - /* pci_dev_init(0); */ -} - -/* - * Write characters to LCD display. - * Note that the bytes for the first character is the last address. - */ -void -sys_led_msg(char* msg) -{ - LED_REG(0) = msg[3]; - LED_REG(1) = msg[2]; - LED_REG(2) = msg[1]; - LED_REG(3) = msg[0]; -} - -#ifdef CONFIG_CMD_DOC -/* - * Map onboard TSOP-16MB DOC FLASH chip. - */ -void doc_init (void) -{ - doc_probe(DOC_BASE_ADDR); -} -#endif - -#define NV_ADDR ((volatile unsigned char *) CONFIG_ENV_ADDR) - -/* Read from NVRAM */ -void* -nvram_read(void *dest, const long src, size_t count) -{ - int i; - volatile unsigned char* d = (unsigned char*)dest; - volatile unsigned char* s = (unsigned char*)src; - - for( i = 0; i < count;i++) - d[i] = s[i]; - - return dest; -} - -/* Write to NVRAM */ -void -nvram_write(long dest, const void *src, size_t count) -{ - int i; - volatile unsigned char* d = (unsigned char*)dest; - volatile unsigned char* s = (unsigned char*)src; - - SYS_TOD_UNPROTECT(); - - for( i = 0; i < count;i++) - d[i] = s[i]; - - SYS_TOD_PROTECT(); -} diff --git a/board/bmw/bmw.h b/board/bmw/bmw.h deleted file mode 100644 index dd97569303..0000000000 --- a/board/bmw/bmw.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * BMW/MPC8245 Board definitions. - * For more info, see http://www.vooha.com/ - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2002 - * James Dougherty (jfd@broadcom.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __BMW_H -#define __BMW_H - -/* System addresses */ - -#define PCI_SPECIAL_BASE 0xfe000000 -#define PCI_SPECIAL_SIZE 0x01000000 - -#define EUMBBAR_VAL 0x80500000 /* Location of EUMB region */ -#define EUMBSIZE 0x00100000 /* Size of EUMB region */ - -/* Extended ROM space devices */ -#define DOC_BASE_ADDR 0xff000000 /* Onboard DOC TSOP 16MB */ -#define DOC2_BASE_ADDR 0x70000000 /* DIP32 socket -> 1GB */ -#define XROM_BASE_ADDR 0x7c000000 /* RCS2 (PAL / Satellite IO) */ -#define PLD_REG_BASE XROM_BASE_ADDR -#define LED_REG_BASE (XROM_BASE_ADDR | 0x2000) -#define TOD_BASE (XROM_BASE_ADDR | 0x4000) -#define LED_REG(x) (*(volatile unsigned char *) \ - (LED_REG_BASE + (x))) -#define XROM_DEV_SIZE 0x00006000 - -#define ENET_DEV_BASE 0x80000000 - -#define PLD_REG(off) (*(volatile unsigned char *)\ - (PLD_REG_BASE + (off))) - -#define PLD_REVID_B1 0x7f /* Fix me */ -#define PLD_REVID_B2 0x01 /* Fix me */ - -#define SYS_HARD_RESET() { for (;;) PLD_REG(0) = 0; } /* clr 0x80 bit */ -#define SYS_REVID_GET() ((int) PLD_REG(0) & 0x7f) -#define SYS_LED_OFF() (PLD_REG(1) |= 0x80) -#define SYS_LED_ON() (PLD_REG(1) &= ~0x80) -#define SYS_WATCHDOG_IRQ3() (PLD_REG(2) |= 0x80) -#define SYS_WATCHDOG_RESET() (PLD_REG(2) &= ~0x80) -#define SYS_TOD_PROTECT() (PLD_REG(3) |= 0x80) -#define SYS_TOD_UNPROTECT() (PLD_REG(3) &= ~0x80) - -#define TOD_REG_BASE (TOD_BASE | 0x1ff0) -#define TOD_NVRAM_BASE TOD_BASE -#define TOD_NVRAM_SIZE 0x1ff0 -#define TOD_NVRAM_LIMIT (TOD_NVRAM_BASE + TOD_NVRAM_SIZE) -#define RTC(r) (TOD_BASE + r) - -/* Onboard BCM570x device */ -#define PCI_ENET_IOADDR 0x80000000 -#define PCI_ENET_MEMADDR 0x80000000 - - -#ifndef __ASSEMBLY__ -/* C Function prototypes */ -void sys_led_msg(char* msg); - -#endif /* !__ASSEMBLY__ */ - -#endif /* __BMW_H */ diff --git a/board/bmw/early_init.S b/board/bmw/early_init.S deleted file mode 100644 index 63c29d500f..0000000000 --- a/board/bmw/early_init.S +++ /dev/null @@ -1,1170 +0,0 @@ -#include <ppc_asm.tmpl> -#include <mpc824x.h> -#include <ppc_defs.h> -#include <asm/cache.h> -#include <asm/mmu.h> - -#define USE_V2_INIT 1 /* Jimmy Blair's initialization. */ - - -/* - * Initialize the MMU using BAT entries and hardwired TLB - * This obviates the need for any code in cpu_init_f which - * configures the BAT registers. -*/ -#define MEMORY_MGMT_MSR_BITS (MSR_DR | MSR_IR) /* Data and Inst Relocate */ - .global iommu_setup - /* Initialize IO/MMU mappings via BAT method Ch. 7, - * PPC Programming Reference - */ -iommu_setup: - -/* initialize the BAT registers (SPRs 528 - 543 */ -#define mtibat0u(x) mtspr 528,(x) /* SPR 528 (IBAT0U) */ -#define mtibat0l(x) mtspr 529,(x) /* SPR 529 (IBAT0L) */ -#define mtibat1u(x) mtspr 530,(x) /* SPR 530 (IBAT1U) */ -#define mtibat1l(x) mtspr 531,(x) /* SPR 531 (IBAT1L) */ -#define mtibat2u(x) mtspr 532,(x) /* SPR 532 (IBAT2U) */ -#define mtibat2l(x) mtspr 533,(x) /* SPR 533 (IBAT2L) */ -#define mtibat3u(x) mtspr 534,(x) /* SPR 534 (IBAT3U) */ -#define mtibat3l(x) mtspr 535,(x) /* SPR 535 (IBAT3L) */ -#define mtdbat0u(x) mtspr 536,(x) /* SPR 536 (DBAT0U) */ -#define mtdbat0l(x) mtspr 537,(x) /* SPR 537 (DBAT0L) */ -#define mtdbat1u(x) mtspr 538,(x) /* SPR 538 (DBAT1U) */ -#define mtdbat1l(x) mtspr 539,(x) /* SPR 539 (DBAT1L) */ -#define mtdbat2u(x) mtspr 540,(x) /* SPR 540 (DBAT2U) */ -#define mtdbat2l(x) mtspr 541,(x) /* SPR 541 (DBAT2L) */ -#define mtdbat3u(x) mtspr 542,(x) /* SPR 542 (DBAT3U) */ -#define mtdbat3l(x) mtspr 543,(x) /* SPR 543 (DBAT3L) */ - - -/* PowerPC processors do not necessarily initialize the BAT - registers on power-up or reset. So they are in an unknown - state. Before programming the BATs for the first time, all - BAT registers MUST have their Vs and Vp bits cleared in the - upper BAT half in order to avoid possibly having 2 BATs - valid and mapping the same memory region. - - The reason for this is that, even with address translation - disabled, multiple BAT hits for an address are treated as - programming errors and can cause unpredictable results. - - It is up to the software to make sure it never has 2 IBAT - mappings or 2 DBAT mappings that are valid for the same - addresses. It is not necessary to perform this code - sequence every time the BATs are programmed, only when - there is a possibility that there may be overlapping BAT - entries. - - When programming the BATs in non-reset scenarios, even if - you are sure that your new mapping will not temporarily - create overlapping regions, it is still a wise idea to - invalidate a BAT entry by setting its upper BAT register to - all 0's before programming it. This will avoid having a - BAT marked valid that is in an unknown or transient state -*/ - - addis r5,0,0x0000 - mtibat0u(r5) - mtibat0l(r5) - mtibat1u(r5) - mtibat1l(r5) - mtibat2u(r5) - mtibat2l(r5) - mtibat3u(r5) - mtibat3l(r5) - mtdbat0u(r5) - mtdbat0l(r5) - mtdbat1u(r5) - mtdbat1l(r5) - mtdbat2u(r5) - mtdbat2l(r5) - mtdbat3u(r5) - mtdbat3l(r5) - isync - -/* - * Set up I/D BAT0 - */ - lis r4, CONFIG_SYS_DBAT0L@h - ori r4, r4, CONFIG_SYS_DBAT0L@l - lis r3, CONFIG_SYS_DBAT0U@h - ori r3, r3, CONFIG_SYS_DBAT0U@l - - mtdbat0l(r4) - isync - mtdbat0u(r3) - isync - sync - - lis r4, CONFIG_SYS_IBAT0L@h - ori r4, r4, CONFIG_SYS_IBAT0L@l - lis r3, CONFIG_SYS_IBAT0U@h - ori r3, r3, CONFIG_SYS_IBAT0U@l - - isync - mtibat0l(r4) - isync - mtibat0u(r3) - isync - -/* - * Set up I/D BAT1 - */ - lis r4, CONFIG_SYS_IBAT1L@h - ori r4, r4, CONFIG_SYS_IBAT1L@l - lis r3, CONFIG_SYS_IBAT1U@h - ori r3, r3, CONFIG_SYS_IBAT1U@l - - isync - mtibat1l(r4) - isync - mtibat1u(r3) - isync - mtdbat1l(r4) - isync - mtdbat1u(r3) - isync - sync - -/* - * Set up I/D BAT2 - */ - lis r4, CONFIG_SYS_IBAT2L@h - ori r4, r4, CONFIG_SYS_IBAT2L@l - lis r3, CONFIG_SYS_IBAT2U@h - ori r3, r3, CONFIG_SYS_IBAT2U@l - - isync - mtibat2l(r4) - isync - mtibat2u(r3) - isync - mtdbat2l(r4) - isync - mtdbat2u(r3) - isync - sync - -/* - * Setup I/D BAT3 - */ - lis r4, CONFIG_SYS_IBAT3L@h - ori r4, r4, CONFIG_SYS_IBAT3L@l - lis r3, CONFIG_SYS_IBAT3U@h - ori r3, r3, CONFIG_SYS_IBAT3U@l - - isync - mtibat3l(r4) - isync - mtibat3u(r3) - isync - mtdbat3l(r4) - isync - mtdbat3u(r3) - isync - sync - - -/* - * Invalidate all 64 TLB's - */ - lis r3, 0 - mtctr r3 - lis r5, 4 - -tlblp: - tlbie r3 - sync - addi r3, r3, 0x1000 - cmplw r3, r5 - blt tlblp - - sync - -/* - * Enable Data Translation - */ - lis r4, MEMORY_MGMT_MSR_BITS@h - ori r4, r4, MEMORY_MGMT_MSR_BITS@l - mfmsr r3 - or r3, r4, r3 - mtmsr r3 - isync - sync - - blr - - -#ifdef USE_V2_INIT -/* #define USER_I_CACHE_ENABLE 1*/ /* Fast rom boots */ -/* Macro for hiadjust and lo */ -#define HIADJ(arg) arg@ha -#define HI(arg) arg@h -#define LO(arg) arg@l - -#undef LOADPTR -#define LOADPTR(reg,const32) \ - addis reg,r0,HIADJ(const32); addi reg,reg,LO(const32) - -.globl early_init_f - -early_init_f: -/* MPC8245/BMW CPCI System Init - * Jimmy Blair, Broadcom Corp, 2002. - */ - mflr r11 - /* Zero-out registers */ - - addis r0,r0,0 - mtspr SPRG0,r0 - mtspr SPRG1,r0 - mtspr SPRG2,r0 - mtspr SPRG3,r0 - - /* Set MPU/MSR to a known state. Turn on FP */ - - LOADPTR (r3, MSR_FP) - sync - mtmsr r3 - isync - - /* Init the floating point control/status register */ - - mtfsfi 7,0x0 - mtfsfi 6,0x0 - mtfsfi 5,0x0 - mtfsfi 4,0x0 - mtfsfi 3,0x0 - mtfsfi 2,0x0 - mtfsfi 1,0x0 - mtfsfi 0,0x0 - isync - - /* Set MPU/MSR to a known state. Turn off FP */ - -#if 1 /* Turn off floating point (remove to keep FP on) */ - andi. r3, r3, 0 - sync - mtmsr r3 - isync -#endif - - /* Init the Segment registers */ - - andi. r3, r3, 0 - isync - mtsr 0,r3 - isync - mtsr 1,r3 - isync - mtsr 2,r3 - isync - mtsr 3,r3 - isync - mtsr 4,r3 - isync - mtsr 5,r3 - isync - mtsr 6,r3 - isync - mtsr 7,r3 - isync - mtsr 8,r3 - isync - mtsr 9,r3 - isync - mtsr 10,r3 - isync - mtsr 11,r3 - isync - mtsr 12,r3 - isync - mtsr 13,r3 - isync - mtsr 14,r3 - isync - mtsr 15,r3 - isync - - /* Turn off data and instruction cache control bits */ - - mfspr r3, HID0 - isync - rlwinm r4, r3, 0, 18, 15 /* r4 has ICE and DCE bits cleared */ - sync - isync - mtspr HID0, r4 /* HID0 = r4 */ - isync - - /* Get cpu type */ - - mfspr r28, PVR - rlwinm r28, r28, 16, 16, 31 - - /* invalidate the MPU's data/instruction caches */ - - lis r3, 0x0 - cmpli 0, 0, r28, CPU_TYPE_603 - beq cpuIs603 - cmpli 0, 0, r28, CPU_TYPE_603E - beq cpuIs603 - cmpli 0, 0, r28, CPU_TYPE_603P - beq cpuIs603 - cmpli 0, 0, r28, CPU_TYPE_604R - bne cpuNot604R - -cpuIs604R: - lis r3, 0x0 - mtspr HID0, r3 /* disable the caches */ - isync - ori r4, r4, 0x0002 /* disable BTAC by setting bit 30 */ - -cpuNot604R: - ori r3, r3, (HID0_ICFI |HID0_DCI) - -cpuIs603: - ori r3, r3, (HID0_ICE | HID0_DCE) - or r4, r4, r3 /* set bits */ - sync - isync - mtspr HID0, r4 /* HID0 = r4 */ - andc r4, r4, r3 /* clear bits */ - isync - cmpli 0, 0, r28, CPU_TYPE_604 - beq cpuIs604 - cmpli 0, 0, r28, CPU_TYPE_604E - beq cpuIs604 - cmpli 0, 0, r28, CPU_TYPE_604R - beq cpuIs604 - mtspr HID0, r4 - isync - -#ifdef USER_I_CACHE_ENABLE - b instCacheOn603 -#else - b cacheEnableDone -#endif - -cpuIs604: - LOADPTR (r5, 0x1000) /* loop count, 0x1000 */ - mtspr CTR, r5 -loopDelay: - nop - bdnz loopDelay - isync - mtspr HID0, r4 - isync - - /* turn the Instruction cache ON for faster FLASH ROM boots */ - -#ifdef USER_I_CACHE_ENABLE - - ori r4, r4, (HID0_ICE | HID0_ICFI) - isync /* Synchronize for ICE enable */ - b writeReg4 -instCacheOn603: - ori r4, r4, (HID0_ICE | HID0_ICFI) - rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */ - - /* - * The setting of the instruction cache enable (ICE) bit must be - * preceded by an isync instruction to prevent the cache from being - * enabled or disabled while an instruction access is in progress. - */ - isync -writeReg4: - mtspr HID0, r4 /* Enable Instr Cache & Inval cache */ - cmpli 0, 0, r28, CPU_TYPE_604 - beq cacheEnableDone - cmpli 0, 0, r28, CPU_TYPE_604E - beq cacheEnableDone - - mtspr HID0, r3 /* using 2 consec instructions */ - /* PPC603 recommendation */ -#endif -cacheEnableDone: - - /* Detect map A or B */ - - addis r5,r0, HI(CHRP_REG_ADDR) - addis r6,r0, HI(CHRP_REG_DATA) - LOADPTR (r7, KAHLUA_ID) /* Kahlua PCI controller ID */ - LOADPTR (r8, BMC_BASE) - - stwbrx r8,0,(r5) - lwbrx r3,0,(r6) /* Store read value to r3 */ - cmp 0,0,r3,r7 - beq cr0, X4_KAHLUA_START - - /* It's not an 8240, is it an 8245? */ - - LOADPTR (r7, KAHLUA2_ID) /* Kahlua PCI controller ID */ - cmp 0,0,r3,r7 - beq cr0, X4_KAHLUA_START - - /* Save the PCI controller type in r7 */ - mr r7, r3 - - LOADPTR (r5, PREP_REG_ADDR) - LOADPTR (r6, PREP_REG_DATA) - -X4_KAHLUA_START: - /* MPC8245 changes begin here */ - LOADPTR (r3, MPC107_PCI_CMD) /* PCI command reg */ - stwbrx r3,0,r5 - li r4, 6 /* Command register value */ - sthbrx r4, 0, r6 - - LOADPTR (r3, MPC107_PCI_STAT) /* PCI status reg */ - stwbrx r3,0,r5 - li r4, -1 /* Write-to-clear all bits */ - li r3, 2 /* PCI_STATUS is at +2 offset */ - sthbrx r4, r3, r6 - - /*-------PROC_INT1_ADR */ - - LOADPTR (r3, PROC_INT1_ADR) /* Processor I/F Config 1 reg. */ - stwbrx r3,0,r5 - LOADPTR (r4, 0xff141b98) - stwbrx r4,0,r6 - - /*-------PROC_INT2_ADR */ - - LOADPTR (r3, PROC_INT2_ADR) /* Processor I/F Config 2 reg. */ - stwbrx r3,0,r5 - lis r4, 0x2000 /* Flush PCI config writes */ - stwbrx r4,0,r6 - - LOADPTR (r9, KAHLUA2_ID) - cmpl 0, 0, r7, r9 - bne L1not8245 - - /* MIOCR1 -- turn on bit for DLL delay */ - - LOADPTR (r3, MIOCR1_ADR_X) - stwbrx r3,0,r5 - li r4, 0x04 - stb r4, MIOCR1_SHIFT(r6) - - /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */ - /* SDRAM_CLK_DEL (0x77)*/ - - LOADPTR (r3, MIOCR2_ADR_X) - stwbrx r3,0,r5 - li r4, 0x10 - stb r4, MIOCR2_SHIFT(r6) - - /* PMCR2 -- set PCI hold delay to <10>b for 33 MHz */ - - LOADPTR (r3, PMCR2_ADR_X) - stwbrx r3,0,r5 - li r4, 0x20 - stb r4, PMCR2_SHIFT(r6) - - /* Initialize EUMBBAR early since 8245 has internal UART in EUMB */ - - LOADPTR (r3, EUMBBAR) - stwbrx r3,0,r5 - LOADPTR (r4, CONFIG_SYS_EUMB_ADDR) - stwbrx r4,0,r6 - -L1not8245: - - /* Toggle the DLL reset bit in AMBOR */ - - LOADPTR (r3, AMBOR) - stwbrx r3,0,r5 - lbz r4, 0(r6) - - andi. r4, r4, 0xdf - stb r4, 0(r6) /* Clear DLL_RESET */ - sync - - ori r4, r4, 0x20 /* Set DLL_RESET */ - stb r4, 0(r6) - sync - - andi. r4, r4, 0xdf - stb r4, 0(r6) /* Clear DLL_RESET */ - - - /* Enable RCS2, use supplied timings */ - LOADPTR (r3, ERCR1) - stwbrx r3,0,r5 - LOADPTR (r4, 0x80408000) - stwbrx r4,0,r6 - - /* Disable RCS3 parameters */ - LOADPTR (r3, ERCR2) - stwbrx r3,0,r5 - LOADPTR (r4, 0x00000000) - stwbrx r4,0,r6 - - /* RCS3 at 0x70000000, 64KBytes */ - LOADPTR (r3, ERCR2) - stwbrx r3,0,r5 - LOADPTR (r4, 0x00000004) - stwbrx r4,0,r6 - - /*-------MCCR1 */ - -#ifdef INCLUDE_ECC -#define MC_ECC 1 -#else /* INCLUDE_ECC */ -#define MC_ECC 0 -#endif /* INCLUDE_ECC */ - -#define MC1_ROMNAL 8 /* 0-15 */ -#define MC1_ROMFAL 11 /* 0-31 */ -#define MC1_DBUS_SIZE 0 /* 0-3, read only */ -#define MC1_BURST 0 /* 0-1 */ -#define MC1_MEMGO 0 /* 0-1 */ -#define MC1_SREN 1 /* 0-1 */ -#define MC1_RAM_TYPE 0 /* 0-1 */ -#define MC1_PCKEN MC_ECC /* 0-1 */ -#define MC1_BANKBITS 0x5555 /* 2 bits/bank 7-0 */ - - LOADPTR (r3, MEM_CONT1_ADR) /* Set MCCR1 (F0) */ - stwbrx r3,0,r5 - LOADPTR(r4, \ - MC1_ROMNAL << 28 | MC1_ROMFAL << 23 | \ - MC1_DBUS_SIZE << 21 | MC1_BURST << 20 | \ - MC1_MEMGO << 19 | MC1_SREN << 18 | \ - MC1_RAM_TYPE << 17 | MC1_PCKEN << 16 ) - li r3, MC1_BANKBITS - cmpl 0, 0, r7, r9 /* Check for Kahlua2 */ - bne BankBitsAdd - cmpli 0, 0, r3, 0x5555 - beq K2BankBitsHack /* On 8245, 5555 ==> 0 */ -BankBitsAdd: - ori r4, r3, 0 -K2BankBitsHack: - stwbrx r4, 0, r6 - - /*------- MCCR2 */ - -#define MC2_TS_WAIT_TIMER 0 /* 0-7 */ -#define MC2_ASRISE 8 /* 0-15 */ -#define MC2_ASFALL 4 /* 0-15 */ -#define MC2_INLINE_PAR_NOT_ECC 0 /* 0-1 */ -#define MC2_WRITE_PARITY_CHK_EN MC_ECC /* 0-1 */ -#define MC2_INLRD_PARECC_CHK_EN MC_ECC /* 0-1 */ -#define MC2_ECC_EN 0 /* 0-1 */ -#define MC2_EDO 0 /* 0-1 */ -/* -* N.B. This refresh interval looks good up to 85 MHz with Hynix SDRAM. -* May need to be decreased for 100 MHz -*/ -#define MC2_REFINT 0x3a5 /* 0-0x3fff */ -#define MC2_RSV_PG 0 /* 0-1 */ -#define MC2_RMW_PAR MC_ECC /* 0-1 */ - - LOADPTR (r3, MEM_CONT2_ADR) /* Set MCCR2 (F4) */ - stwbrx r3,0,r5 - LOADPTR(r4, \ - MC2_TS_WAIT_TIMER << 29 | MC2_ASRISE << 25 | \ - MC2_ASFALL << 21 | MC2_INLINE_PAR_NOT_ECC << 20 | \ - MC2_WRITE_PARITY_CHK_EN << 19 | \ - MC2_INLRD_PARECC_CHK_EN << 18 | \ - MC2_ECC_EN << 17 | MC2_EDO << 16 | \ - MC2_REFINT << 2 | MC2_RSV_PG << 1 | MC2_RMW_PAR) - cmpl 0, 0, r7, r9 /* Check for Kahlua2 */ - bne notK2 - /* clear Kahlua2 reserved bits */ - LOADPTR (r3, 0xfffcffff) - and r4, r4, r3 -notK2: - stwbrx r4,0,r6 - - /*------- MCCR3 */ - -#define MC_BSTOPRE 0x079 /* 0-0x7ff */ - -#define MC3_BSTOPRE_U (MC_BSTOPRE >> 4 & 0xf) -#define MC3_REFREC 8 /* 0-15 */ -#define MC3_RDLAT (4+MC_ECC) /* 0-15 */ -#define MC3_CPX 0 /* 0-1 */ -#define MC3_RAS6P 0 /* 0-15 */ -#define MC3_CAS5 0 /* 0-7 */ -#define MC3_CP4 0 /* 0-7 */ -#define MC3_CAS3 0 /* 0-7 */ -#define MC3_RCD2 0 /* 0-7 */ -#define MC3_RP1 0 /* 0-7 */ - - LOADPTR (r3, MEM_CONT3_ADR) /* Set MCCR3 (F8) */ - stwbrx r3,0,r5 - LOADPTR(r4, \ - MC3_BSTOPRE_U << 28 | MC3_REFREC << 24 | \ - MC3_RDLAT << 20 | MC3_CPX << 19 | \ - MC3_RAS6P << 15 | MC3_CAS5 << 12 | MC3_CP4 << 9 | \ - MC3_CAS3 << 6 | MC3_RCD2 << 3 | MC3_RP1) - cmpl 0, 0, r7, r9 /* Check for Kahlua2 */ - bne notK2b - /* clear Kahlua2 reserved bits */ - LOADPTR (r3, 0xff000000) - and r4, r4, r3 -notK2b: - stwbrx r4,0,r6 - - /*------- MCCR4 */ - -#define MC4_PRETOACT 3 /* 0-15 */ -#define MC4_ACTOPRE 5 /* 0-15 */ -#define MC4_WMODE 0 /* 0-1 */ -#define MC4_INLINE MC_ECC /* 0-1 */ -#define MC4_REGISTERED (1-MC_ECC) /* 0-1 */ -#define MC4_BSTOPRE_UU (MC_BSTOPRE >> 8 & 3) -#define MC4_REGDIMM 0 /* 0-1 */ -#define MC4_SDMODE_CAS 2 /* 0-7 */ -#define MC4_DBUS_RCS1 1 /* 0-1, 8-bit */ -#define MC4_SDMODE_WRAP 0 /* 0-1 */ -#define MC4_SDMODE_BURST 2 /* 0-7 */ -#define MC4_ACTORW 3 /* 0-15 */ -#define MC4_BSTOPRE_L (MC_BSTOPRE & 0xf) - - LOADPTR (r3, MEM_CONT4_ADR) /* Set MCCR4 (FC) */ - stwbrx r3,0,r5 - LOADPTR(r4, \ - MC4_PRETOACT << 28 | MC4_ACTOPRE << 24 | \ - MC4_WMODE << 23 | MC4_INLINE << 22 | \ - MC4_REGISTERED << 20 | MC4_BSTOPRE_UU << 18 | \ - MC4_DBUS_RCS1 << 17 | \ - MC4_REGDIMM << 15 | MC4_SDMODE_CAS << 12 | \ - MC4_SDMODE_WRAP << 11 | MC4_SDMODE_BURST << 8 | \ - MC4_ACTORW << 4 | MC4_BSTOPRE_L) - cmpl 0, 0, r7, r9 /* Check for Kahlua 2 */ - bne notK2c - /* Turn on Kahlua2 extended ROM space */ - LOADPTR (r3, 0x00200000) - or r4, r4, r3 -notK2c: - stwbrx r4,0,r6 - -#ifdef INCLUDE_ECC - /*------- MEM_ERREN1 */ - - LOADPTR (r3, MEM_ERREN1_ADR) /* Set MEM_ERREN1 (c0) */ - stwbrx r3,0,r5 - lwbrx r4,0,r6 - ori r4,r4,4 /* Set MEM_PERR_EN */ - stwbrx r4,0,r6 -#endif /* INCLUDE_ECC */ - - /*------- MSAR/MEAR */ - - LOADPTR (r3, MEM_START1_ADR) /* Set MSAR1 (80) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0xc0804000) - stwbrx r4,0,r6 - - LOADPTR (r3, MEM_START2_ADR) /* Set MSAR2 (84) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0xc0804000) - stwbrx r4,0,r6 - - LOADPTR (r3, XMEM_START1_ADR) /* Set MESAR1 (88) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0x00000000) - stwbrx r4,0,r6 - - LOADPTR (r3, XMEM_START2_ADR) /* Set MESAR2 (8c) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0x01010101) - stwbrx r4,0,r6 - - LOADPTR (r3, MEM_END1_ADR) /* Set MEAR1 (90) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0xffbf7f3f) - stwbrx r4,0,r6 - - LOADPTR (r3, MEM_END2_ADR) /* Set MEAR2 (94) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0xffbf7f3f) - stwbrx r4,0,r6 - - LOADPTR (r3, XMEM_END1_ADR) /* MEEAR1 (98) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0x00000000) - stwbrx r4,0,r6 - - LOADPTR (r3, XMEM_END2_ADR) /* MEEAR2 (9c) */ - stwbrx r3,0,r5 - LOADPTR (r4, 0x01010101) - stwbrx r4,0,r6 - - /*-------ODCR */ - - LOADPTR (r3, ODCR_ADR_X) /* Set ODCR */ - stwbrx r3,0,r5 - - li r4, 0x7f - stb r4, ODCR_SHIFT(r6) /* ODCR is at +3 offset */ - - /*-------MBEN */ - - LOADPTR (r3, MEM_EN_ADR) /* Set MBEN (a0) */ - stwbrx r3,0,r5 - li r4, 0x01 /* Enable bank 0 */ - stb r4, 0(r6) /* MBEN is at +0 offset */ - -#if 0 /* Jimmy: I think page made is broken */ - /*-------PGMAX */ - - LOADPTR (r3, MPM_ADR_X) - stwbrx r3,0,r5 - li r4, 0x32 - stb r4, MPM_SHIFT(r6) /* PAGE_MODE is at +3 offset */ -#endif - - /* Wait before initializing other registers */ - - lis r4,0x0001 - mtctr r4 - -KahluaX4wait200us: - bdnz KahluaX4wait200us - - /* Set MEMGO bit */ - - LOADPTR (r3, MEM_CONT1_ADR) /* MCCR1 (F0) |= PGMAX */ - stwbrx r3,0,r5 - lwbrx r4,0,r6 /* old MCCR1 */ - oris r4,r4,0x0008 /* MEMGO=1 */ - stwbrx r4, 0, r6 - - /* Wait again */ - - addis r4,r0,0x0002 - ori r4,r4,0xffff - - mtctr r4 - -KahluaX4wait8ref: - bdnz KahluaX4wait8ref - - sync - eieio - mtlr r11 - blr - -#else /* USE_V2_INIT */ - - -/* U-Boot works, but memory will not run reliably for all address ranges. - * Early U-Boot Working init, but 2.4.19 kernel will crash since memory is not - * initialized correctly. Could work if debugged. - */ -/* PCI Support routines */ - - .globl __pci_config_read_32 -__pci_config_read_32: - lis r4, 0xfec0 - stwbrx r3, r0, r4 - sync - lis r4, 0xfee0 - lwbrx r3, 0, r4 - blr - .globl __pci_config_read_16 -__pci_config_read_16: - lis r4, 0xfec0 - andi. r5, r3, 2 - stwbrx r3, r0, r4 - sync - oris r4, r5, 0xfee0 - lhbrx r3, r0, r4 - blr - .globl __pci_config_read_8 -__pci_config_read_8: - lis r4, 0xfec0 - andi. r5, r3, 3 - stwbrx r3, r0, r4 - sync - oris r4, r5, 0xfee0 - lbz r3, 0(4) - blr - .globl __pci_config_write_32 -__pci_config_write_32: - lis r5, 0xfec0 - stwbrx r3, r0, r5 - sync - lis r5, 0xfee0 - stwbrx r4, r0, r5 - sync - blr - .globl __pci_config_write_16 -__pci_config_write_16: - lis r5, 0xfec0 - andi. r6, r3, 2 - stwbrx r3, r0, 5 - sync - oris r5, r6, 0xfee0 - sthbrx r4, r0, r5 - sync - blr - .globl __pci_config_write_8 -__pci_config_write_8: - lis r5, 0xfec0 - andi. r6, r3, 3 - stwbrx r3, r0, r5 - sync - oris r5, r6, 0xfee0 - stb r4, 0(r5) - sync - blr - .globl in_8 -in_8: - oris r3, r3, 0xfe00 - lbz r3,0(r3) - blr - .globl in_16 -in_16: - oris r3, r3, 0xfe00 - lhbrx r3, 0, r3 - blr - .globl in_16_ne -in_16_ne: - oris r3, r3, 0xfe00 - lhzx r3, 0, r3 - blr - .globl in_32 -in_32: - oris r3, r3, 0xfe00 - lwbrx r3, 0, r3 - blr - .globl out_8 -out_8: - oris r3, r3, 0xfe00 - stb r4, 0(r3) - eieio - blr - .globl out_16 -out_16: - oris r3, r3, 0xfe00 - sthbrx r4, 0, r3 - eieio - blr - .globl out_16_ne -out_16_ne: - oris r3, r3, 0xfe00 - sth r4, 0(r3) - eieio - blr - .globl out_32 -out_32: - oris r3, r3, 0xfe00 - stwbrx r4, 0, r3 - eieio - blr - .globl read_8 -read_8: - lbz r3,0(r3) - blr - .globl read_16 -read_16: - lhbrx r3, 0, r3 - blr - .globl read_32 -read_32: - lwbrx r3, 0, r3 - blr - .globl read_32_ne -read_32_ne: - lwz r3, 0(r3) - blr - .globl write_8 -write_8: - stb r4, 0(r3) - eieio - blr - .globl write_16 -write_16: - sthbrx r4, 0, r3 - eieio - blr - .globl write_32 -write_32: - stwbrx r4, 0, r3 - eieio - blr - .globl write_32_ne -write_32_ne: - stw r4, 0(r3) - eieio - blr - - -.globl early_init_f - -early_init_f: - mflr r11 - lis r10, 0x8000 - - /* PCI Latency Timer */ - li r4, 0x0d - ori r3, r10, PLTR@l - bl __pci_config_write_8 - - /* Cache Line Size */ - li r4, 0x08 - ori r3, r10, PCLSR@l - bl __pci_config_write_8 - - /* PCI Cmd */ - li r4, 6 - ori r3, r10, PCICR@l - bl __pci_config_write_16 - -#if 1 - /* PCI Stat */ - ori r3, r10, PCISR@l - bl __pci_config_read_16 - ori r4, r4, 0xffff - ori r3, r10, PCISR@l - bl __pci_config_write_16 -#endif - - /* PICR1 */ - lis r4, 0xff14 - ori r4, r4, 0x1b98 - ori r3, r10, PICR1@l - bl __pci_config_write_32 - - - /* PICR2 */ - lis r4, 0x0404 - ori r4, r4, 0x0004 - ori r3, r10, PICR2@l - bl __pci_config_write_32 - - /* MIOCR1 */ - li r4, 0x04 - ori r3, r10, MIOCR1@l - bl __pci_config_write_8 - - /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */ - /* SDRAM_CLK_DEL (0x77)*/ - li r4, 0x10 - ori r3, r10, MIOCR2@l - bl __pci_config_write_8 - - /* EUMBBAR */ - lis r4, 0xfc00 - ori r3, r10, EUMBBAR@l - bl __pci_config_write_32 - - /* AMBOR */ - - /* Even if Address Map B is not being used (though it should), - * the memory DLL needs to be cleared/set/cleared before using memory. - */ - - ori r3, r10, AMBOR@l - bl __pci_config_read_8 /* get Current bits */ - - andi. r4, r4, 0xffdf - ori r3, r10, AMBOR@l - bl __pci_config_write_16 /* Clear DLL_RESET */ - - ori r4, r4, 0x0020 - ori r3, r10, AMBOR@l - bl __pci_config_write_16 /* Set DLL_RESET */ - - andi. r4, r4, 0xffdf - ori r3, r10, AMBOR@l - bl __pci_config_write_16 /* Clear DLL_RESET */ - - /* ERCR1 */ - lis r4, 0x8040 /* Enable RCS2, use supplied timings */ - ori r4, r4, 0x8000 - ori r3, r10, ERCR1@l - bl __pci_config_write_32 - - /* ERCR2 */ - lis r4, 0x0000 /* Disable RCS3 parms */ - ori r4, r4, 0x0000 - ori r3, r10, ERCR2@l - bl __pci_config_write_32 - - /* ERCR3 */ - lis r4, 0x0000 /* RCS3 at 0x70000000, 64K bytes */ - ori r4, r4, 0x0004 - ori r3, r10, ERCR2@l - bl __pci_config_write_32 - - /* Preserve memgo bit */ - /* MCCR1 */ - -/* lis r4, 0x75a8 / Safe Local ROM = 11+3 clocks */ - lis r4, 0x75a0 /* Safe Local ROM = 11+3 clocks */ -/* lis r4, 0x73a0 / Fast Local ROM = 7+3 clocks */ -/* oris r4, r4, 0x0010 / Burst ROM/Flash enable */ -/* oris r4, r4, 0x0004 / Self-refresh enable */ - -/* ori r4,r4,0xFFFF / 16Mbit 2bank SDRAM */ -/* ori r4,r4,0xAAAA / 256Mbit 4bank SDRAM (8245 only) */ -/* ori r4,r4,0x5555 / 64Mbit 2bank SDRAM */ - ori r4,r4,0x0000 /* 64Mbit 4bank SDRAM */ - - ori r3, r10, MCCR1@l - bl __pci_config_write_32 - - /* MCCR2 */ - - lis r4,0x0000 -/* oris r4,r4,0x4000 / TS_WAIT_TIMER = 3 clocks */ - oris r4,r4,0x1000 /* ASRISE = 8 clocks */ - oris r4,r4,0x0080 /* ASFALL = 8 clocks */ -/* oris r4,r4,0x0010 / SDRAM Parity (else ECC) */ -/* oris r4,r4,0x0008 / Write parity check */ -/* oris r4,r4,0x0004 / SDRAM inline reads */ - - -/* Select a refresh rate; it needs to match the bus speed; if too */ -/* slow, data may be lost; if too fast, performance is lost. We */ -/* use the fastest value so we run at all speeds. */ -/* Refresh = (15600ns/busclk) - (213 (see UM)). */ - -/* ori r4,r4,0x1d2c / 133 MHz mem bus = 1867 */ -/* ori r4,r4,0x150c / 100 MHz mem bus = 1347 */ -/* ori r4,r4,0x10fc / 83 MHz mem bus = 1087 */ -/* ori r4,r4,0x0cc4 / 66 MHz mem bus = 817 */ - ori r4,r4,0x04cc /* 33 MHz mem bus (SAFE) = 307 */ -/* ori r4,r4,0x0002 / Reserve a page */ -/* ori r4,r4,0x0001 / RWM parity */ - - ori r3, r10, MCCR2@l - bl __pci_config_write_32 - - - /* MCCR3 */ - lis r4,0x0000 /* BSTOPRE_M = 7 (see A/N) */ - oris r4,r4,0x0500 /* REFREC = 8 clocks */ - ori r3, r10, MCCR3@l - bl __pci_config_write_32 - - /* MCCR4 */ /* Turn on registered buffer mode */ - lis r4, 0x2000 /* PRETOACT = 3 clocks */ - oris r4,r4,0x0400 /* ACTOPRE = 5 clocks */ -/* oris r4,r4,0x0080 / Enable 8-beat burst (32-bit bus) */ -/* oris r4,r4,0x0040 / Enable Inline ECC/Parity */ - oris r4,r4,0x0020 /* EXTROM enabled */ - oris r4,r4,0x0010 /* Registered buffers */ -/* oris r4,r4,0x0000 / BSTOPRE_U = 0 (see A/N) */ - oris r4,r4,0x0002 /* DBUS_SIZ[2] (8 bit on RCS1) */ - -/* ori r4,r4,0x8000 / Registered DIMMs */ - ori r4,r4,0x2000 /*CAS Latency (CL=3) (see RDLAT) */ -/* ori r4,r4,0x2000 / CAS Latency (CL=2) (see RDLAT) */ -/* ori r4,r4,0x0300 / Sequential wrap/8-beat burst */ - ori r4,r4,0x0200 /* Sequential wrap/4-beat burst */ - ori r4,r4,0x0030 /* ACTORW = 3 clocks */ - ori r4,r4,0x0009 /* BSTOPRE_L = 9 (see A/N) */ - - ori r3, r10, MCCR4@l - bl __pci_config_write_32 - - /* MSAR1 */ - lis r4, 0xc0804000@h - ori r4, r4, 0xc0804000@l - ori r3, r10, MSAR1@l - bl __pci_config_write_32 - - /* MSAR2 */ - lis r4, 0xc0804000@h - ori r4, r4, 0xc0804000@l - ori r3, r10, MSAR2@l - bl __pci_config_write_32 - - /* MESAR1 */ - lis r4, 0x00000000@h - ori r4, r4, 0x00000000@l - ori r3, r10, EMSAR1@l - bl __pci_config_write_32 - - /* MESAR2 */ - lis r4, 0x01010101@h - ori r4, r4, 0x01010101@l - ori r3, r10, EMSAR2@l - bl __pci_config_write_32 - - /* MEAR1 */ - lis r4, 0xffbf7f3f@h - ori r4, r4, 0xffbf7f3f@l - ori r3, r10, MEAR1@l - bl __pci_config_write_32 - - /* MEAR2 */ - lis r4, 0xffbf7f3f@h - ori r4, r4, 0xffbf7f3f@l - ori r3, r10, MEAR2@l - bl __pci_config_write_32 - - /* MEEAR1 */ - lis r4, 0x00000000@h - ori r4, r4, 0x00000000@l - ori r3, r10, EMEAR1@l - bl __pci_config_write_32 - - /* MEEAR2 */ - lis r4, 0x01010101@h - ori r4, r4, 0x01010101@l - ori r3, r10, EMEAR2@l - bl __pci_config_write_32 - - /* ODCR */ - li r4, 0x7f - ori r3, r10, ODCR@l - bl __pci_config_write_8 - - /* MBER */ - li r4, 0x01 - ori r3, r10, MBER@l - bl __pci_config_write_8 - - /* Page CTR aka PGMAX */ - li r4, 0x32 - ori r3, r10, 0x70 - bl __pci_config_write_8 - -#if 0 - /* CLK Drive */ - ori r4, r10, 0xfc01 /* Top bit will be ignored */ - ori r3, r10, 0x74 - bl __pci_config_write_16 -#endif - - /* delay */ - lis r7, 1 - mtctr r7 -label1: bdnz label1 - - /* Set memgo bit */ - /* MCCR1 */ - ori r3, r10, MCCR1@l - bl __pci_config_read_32 - lis r7, 0x0008 - or r4, r3, r7 - ori r3, r10, MCCR1@l - bl __pci_config_write_32 - - /* delay again */ - lis r7, 1 - mtctr r7 -label2: bdnz label2 -#if 0 -/* DEBUG: Infinite loop, write then read */ -loop: - lis r7, 0xffff - mtctr r7 - li r3, 0x5004 - lis r4, 0xa0a0 - ori r4, r4, 0x5050 - bl write_32_ne - li r3, 0x5004 - bl read_32_ne - bdnz loop -#endif - mtlr r11 - blr -#endif diff --git a/board/bmw/flash.c b/board/bmw/flash.c deleted file mode 100644 index 57ffe0890f..0000000000 --- a/board/bmw/flash.c +++ /dev/null @@ -1,779 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc824x.h> -#include <asm/processor.h> -#include <asm/pci_io.h> - -#define ROM_CS0_START 0xFF800000 -#define ROM_CS1_START 0xFF000000 - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#if defined(CONFIG_ENV_IS_IN_FLASH) -# ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -# endif -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif -# ifndef CONFIG_ENV_SECT_SIZE -# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE -# endif -#endif - -/*----------------------------------------------------------------------- - * Functions - */ -static int write_word (flash_info_t * info, ulong dest, ulong data); - -#if 0 -static void flash_get_offsets (ulong base, flash_info_t * info); -#endif /* 0 */ - -/*flash command address offsets*/ - -#if 0 -#define ADDR0 (0x555) -#define ADDR1 (0x2AA) -#define ADDR3 (0x001) -#else -#define ADDR0 (0xAAA) -#define ADDR1 (0x555) -#define ADDR3 (0x001) -#endif - -#define FLASH_WORD_SIZE unsigned char - -/*----------------------------------------------------------------------- - */ - -#if 0 -static int byte_parity_odd (unsigned char x) __attribute__ ((const)); -#endif /* 0 */ -static unsigned long flash_id (unsigned char mfct, unsigned char chip) - __attribute__ ((const)); - -typedef struct { - FLASH_WORD_SIZE extval; - unsigned short intval; -} map_entry; - -#if 0 -static int byte_parity_odd (unsigned char x) -{ - x ^= x >> 4; - x ^= x >> 2; - x ^= x >> 1; - return (x & 0x1) != 0; -} -#endif /* 0 */ - - -static unsigned long flash_id (unsigned char mfct, unsigned char chip) -{ - static const map_entry mfct_map[] = { - {(FLASH_WORD_SIZE) AMD_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_AMD >> 16)}, - {(FLASH_WORD_SIZE) FUJ_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_FUJ >> 16)}, - {(FLASH_WORD_SIZE) STM_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_STM >> 16)}, - {(FLASH_WORD_SIZE) MT_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_MT >> 16)}, - {(FLASH_WORD_SIZE) INTEL_MANUFACT, - (unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)}, - {(FLASH_WORD_SIZE) INTEL_ALT_MANU, - (unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)} - }; - - static const map_entry chip_map[] = { - {AMD_ID_F040B, FLASH_AM040}, - {(FLASH_WORD_SIZE) STM_ID_x800AB, FLASH_STM800AB} - }; - - const map_entry *p; - unsigned long result = FLASH_UNKNOWN; - - /* find chip id */ - for (p = &chip_map[0]; - p < &chip_map[sizeof chip_map / sizeof chip_map[0]]; p++) - if (p->extval == chip) { - result = FLASH_VENDMASK | p->intval; - break; - } - - /* find vendor id */ - for (p = &mfct_map[0]; - p < &mfct_map[sizeof mfct_map / sizeof mfct_map[0]]; p++) - if (p->extval == mfct) { - result &= ~FLASH_VENDMASK; - result |= (unsigned long) p->intval << 16; - break; - } - - return result; -} - - -unsigned long flash_init (void) -{ - unsigned long i; - unsigned char j; - static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - flash_info_t *const pflinfo = &flash_info[i]; - - pflinfo->flash_id = FLASH_UNKNOWN; - pflinfo->size = 0; - pflinfo->sector_count = 0; - } - - for (i = 0; i < sizeof flash_banks / sizeof flash_banks[0]; i++) { - flash_info_t *const pflinfo = &flash_info[i]; - const unsigned long base_address = flash_banks[i]; - volatile FLASH_WORD_SIZE *const flash = - (FLASH_WORD_SIZE *) base_address; -#if 0 - volatile FLASH_WORD_SIZE *addr2; -#endif -#if 0 - /* write autoselect sequence */ - flash[0x5555] = 0xaa; - flash[0x2aaa] = 0x55; - flash[0x5555] = 0x90; -#else - flash[0xAAA << (3 * i)] = 0xaa; - flash[0x555 << (3 * i)] = 0x55; - flash[0xAAA << (3 * i)] = 0x90; -#endif - __asm__ __volatile__ ("sync"); - -#if 0 - pflinfo->flash_id = flash_id (flash[0x0], flash[0x1]); -#else - pflinfo->flash_id = - flash_id (flash[0x0], flash[0x2 + 14 * i]); -#endif - - switch (pflinfo->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - pflinfo->size = 0x00080000; - pflinfo->sector_count = 8; - for (j = 0; j < 8; j++) { - pflinfo->start[j] = - base_address + 0x00010000 * j; - pflinfo->protect[j] = flash[(j << 16) | 0x2]; - } - break; - case FLASH_STM800AB: - pflinfo->size = 0x00100000; - pflinfo->sector_count = 19; - pflinfo->start[0] = base_address; - pflinfo->start[1] = base_address + 0x4000; - pflinfo->start[2] = base_address + 0x6000; - pflinfo->start[3] = base_address + 0x8000; - for (j = 1; j < 16; j++) { - pflinfo->start[j + 3] = - base_address + 0x00010000 * j; - } -#if 0 - /* check for protected sectors */ - for (j = 0; j < pflinfo->sector_count; j++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile FLASH_WORD_SIZE - *) (pflinfo->start[j]); - if (pflinfo->flash_id & FLASH_MAN_SST) - pflinfo->protect[j] = 0; - else - pflinfo->protect[j] = addr2[2] & 1; - } -#endif - break; - } - /* Protect monitor and environment sectors - */ -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, - &flash_info[0]); -#endif - -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, - &flash_info[0]); -#endif - - /* reset device to read mode */ - flash[0x0000] = 0xf0; - __asm__ __volatile__ ("sync"); - } - - return flash_info[0].size + flash_info[1].size; -} - -#if 0 -static void flash_get_offsets (ulong base, flash_info_t * info) -{ - int i; - - /* set up sector start address table */ - if (info->flash_id & FLASH_MAN_SST) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - -} -#endif /* 0 */ - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - static const char unk[] = "Unknown"; - const char *mfct = unk, *type = unk; - unsigned int i; - - if (info->flash_id != FLASH_UNKNOWN) { - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - mfct = "AMD"; - break; - case FLASH_MAN_FUJ: - mfct = "FUJITSU"; - break; - case FLASH_MAN_STM: - mfct = "STM"; - break; - case FLASH_MAN_SST: - mfct = "SST"; - break; - case FLASH_MAN_BM: - mfct = "Bright Microelectonics"; - break; - case FLASH_MAN_INTEL: - mfct = "Intel"; - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: - type = "AM29F040B (512K * 8, uniform sector size)"; - break; - case FLASH_AM400B: - type = "AM29LV400B (4 Mbit, bottom boot sect)"; - break; - case FLASH_AM400T: - type = "AM29LV400T (4 Mbit, top boot sector)"; - break; - case FLASH_AM800B: - type = "AM29LV800B (8 Mbit, bottom boot sect)"; - break; - case FLASH_AM800T: - type = "AM29LV800T (8 Mbit, top boot sector)"; - break; - case FLASH_AM160T: - type = "AM29LV160T (16 Mbit, top boot sector)"; - break; - case FLASH_AM320B: - type = "AM29LV320B (32 Mbit, bottom boot sect)"; - break; - case FLASH_AM320T: - type = "AM29LV320T (32 Mbit, top boot sector)"; - break; - case FLASH_STM800AB: - type = "M29W800AB (8 Mbit, bottom boot sect)"; - break; - case FLASH_SST800A: - type = "SST39LF/VF800 (8 Mbit, uniform sector size)"; - break; - case FLASH_SST160A: - type = "SST39LF/VF160 (16 Mbit, uniform sector size)"; - break; - } - } - - printf ("\n Brand: %s Type: %s\n" - " Size: %lu KB in %d Sectors\n", - mfct, type, info->size >> 10, info->sector_count); - - printf (" Sector Start Addresses:"); - - for (i = 0; i < info->sector_count; i++) { - unsigned long size; - unsigned int erased; - unsigned long *flash = (unsigned long *) info->start[i]; - - /* - * Check if whole sector is erased - */ - size = (i != (info->sector_count - 1)) ? - (info->start[i + 1] - info->start[i]) >> 2 : - (info->start[0] + info->size - info->start[i]) >> 2; - - for (flash = (unsigned long *) info->start[i], erased = 1; - (flash != (unsigned long *) info->start[i] + size) - && erased; flash++) - erased = *flash == ~0x0UL; - - printf ("%s %08lX %s %s", - (i % 5) ? "" : "\n ", - info->start[i], - erased ? "E" : " ", info->protect[i] ? "RO" : " "); - } - - puts ("\n"); - return; -} - -#if 0 - -/* - * The following code cannot be run from FLASH! - */ -ulong flash_get_size (vu_long * addr, flash_info_t * info) -{ - short i; - FLASH_WORD_SIZE value; - ulong base = (ulong) addr; - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr; - - printf ("flash_get_size: \n"); - /* Write auto select command: read Manufacturer ID */ - eieio (); - addr2[ADDR0] = (FLASH_WORD_SIZE) 0xAA; - addr2[ADDR1] = (FLASH_WORD_SIZE) 0x55; - addr2[ADDR0] = (FLASH_WORD_SIZE) 0x90; - value = addr2[0]; - - switch (value) { - case (FLASH_WORD_SIZE) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case (FLASH_WORD_SIZE) FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - case (FLASH_WORD_SIZE) SST_MANUFACT: - info->flash_id = FLASH_MAN_SST; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - printf ("recognised manufacturer"); - - value = addr2[ADDR3]; /* device ID */ - debug ("\ndev_code=%x\n", value); - - switch (value) { - case (FLASH_WORD_SIZE) AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (FLASH_WORD_SIZE) AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - case (FLASH_WORD_SIZE) AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (FLASH_WORD_SIZE) AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (FLASH_WORD_SIZE) AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (FLASH_WORD_SIZE) AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (FLASH_WORD_SIZE) SST_ID_xF800A: - info->flash_id += FLASH_SST800A; - info->sector_count = 16; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (FLASH_WORD_SIZE) SST_ID_xF160A: - info->flash_id += FLASH_SST160A; - info->sector_count = 32; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (FLASH_WORD_SIZE) AMD_ID_F040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; - break; /* => 0.5 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - printf ("flash id %lx; sector count %x, size %lx\n", info->flash_id, - info->sector_count, info->size); - /* set up sector start address table */ - if (info->flash_id & FLASH_MAN_SST) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]); - if (info->flash_id & FLASH_MAN_SST) - info->protect[i] = 0; - else - info->protect[i] = addr2[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr2 = (FLASH_WORD_SIZE *) info->start[0]; - *addr2 = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ - } - - return (info->size); -} - -#endif - - -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - unsigned char sh8b; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Check the ROM CS */ - if ((info->start[0] >= ROM_CS1_START) - && (info->start[0] < ROM_CS0_START)) - sh8b = 3; - else - sh8b = 0; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055; - addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00800080; - addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info-> - start - [sect] - - - info-> - start - [0]) << - sh8b)); - if (info->flash_id & FLASH_MAN_SST) { - addr[ADDR0 << sh8b] = - (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1 << sh8b] = - (FLASH_WORD_SIZE) 0x00550055; - addr[ADDR0 << sh8b] = - (FLASH_WORD_SIZE) 0x00800080; - addr[ADDR0 << sh8b] = - (FLASH_WORD_SIZE) 0x00AA00AA; - addr[ADDR1 << sh8b] = - (FLASH_WORD_SIZE) 0x00550055; - addr[0] = (FLASH_WORD_SIZE) 0x00500050; /* block erase */ - udelay (30000); /* wait 30 ms */ - } else - addr[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */ - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info->start[l_sect] - - info-> - start[0]) << sh8b)); - while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) != - (FLASH_WORD_SIZE) 0x00800080) { - if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - serial_putc ('.'); - last = now; - } - } - - DONE: - /* reset to read mode */ - addr = (FLASH_WORD_SIZE *) info->start[0]; - addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < 4 && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < 4; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i = 0; i < 4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < 4; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_word (info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) info->start[0]; - volatile FLASH_WORD_SIZE *dest2; - volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data; - ulong start; - int flag; - int i; - unsigned char sh8b; - - /* Check the ROM CS */ - if ((info->start[0] >= ROM_CS1_START) - && (info->start[0] < ROM_CS0_START)) - sh8b = 3; - else - sh8b = 0; - - dest2 = (FLASH_WORD_SIZE *) (((dest - info->start[0]) << sh8b) + - info->start[0]); - - /* Check if Flash is (sufficiently) erased */ - if ((*dest2 & (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) { - addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055; - addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00A000A0; - - dest2[i << sh8b] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* data polling for D7 */ - start = get_timer (0); - while ((dest2[i << sh8b] & (FLASH_WORD_SIZE) 0x00800080) != - (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - } - - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/bmw/m48t59y.c b/board/bmw/m48t59y.c deleted file mode 100644 index 4e83b9076e..0000000000 --- a/board/bmw/m48t59y.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - * SGS M48-T59Y TOD/NVRAM Driver - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp. - * - * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * SGS M48-T59Y TOD/NVRAM Driver - * - * The SGS M48 an 8K NVRAM starting at offset M48_BASE_ADDR and - * continuing for 8176 bytes. After that starts the Time-Of-Day (TOD) - * registers which are used to set/get the internal date/time functions. - * - * This module implements Y2K compliance by taking full year numbers - * and translating back and forth from the TOD 2-digit year. - * - * NOTE: for proper interaction with an operating system, the TOD should - * be used to store Universal Coordinated Time (GMT) and timezone - * conversions should be used. - * - * Here is a diagram of the memory layout: - * - * +---------------------------------------------+ 0xffe0a000 - * | Non-volatile memory | . - * | | . - * | (8176 bytes of Non-volatile memory) | . - * | | . - * +---------------------------------------------+ 0xffe0bff0 - * | Flags | - * +---------------------------------------------+ 0xffe0bff1 - * | Unused | - * +---------------------------------------------+ 0xffe0bff2 - * | Alarm Seconds | - * +---------------------------------------------+ 0xffe0bff3 - * | Alarm Minutes | - * +---------------------------------------------+ 0xffe0bff4 - * | Alarm Date | - * +---------------------------------------------+ 0xffe0bff5 - * | Interrupts | - * +---------------------------------------------+ 0xffe0bff6 - * | WatchDog | - * +---------------------------------------------+ 0xffe0bff7 - * | Calibration | - * +---------------------------------------------+ 0xffe0bff8 - * | Seconds | - * +---------------------------------------------+ 0xffe0bff9 - * | Minutes | - * +---------------------------------------------+ 0xffe0bffa - * | Hours | - * +---------------------------------------------+ 0xffe0bffb - * | Day | - * +---------------------------------------------+ 0xffe0bffc - * | Date | - * +---------------------------------------------+ 0xffe0bffd - * | Month | - * +---------------------------------------------+ 0xffe0bffe - * | Year (2 digits only) | - * +---------------------------------------------+ 0xffe0bfff - */ -#include <common.h> -#include <rtc.h> -#include "bmw.h" - -/* - * Imported from mousse.h: - * - * TOD_REG_BASE Base of m48t59y TOD registers - * SYS_TOD_UNPROTECT() Disable NVRAM write protect - * SYS_TOD_PROTECT() Re-enable NVRAM write protect - */ - -#define YEAR 0xf -#define MONTH 0xe -#define DAY 0xd -#define DAY_OF_WEEK 0xc -#define HOUR 0xb -#define MINUTE 0xa -#define SECOND 0x9 -#define CONTROL 0x8 -#define WATCH 0x7 -#define INTCTL 0x6 -#define WD_DATE 0x5 -#define WD_HOUR 0x4 -#define WD_MIN 0x3 -#define WD_SEC 0x2 -#define _UNUSED 0x1 -#define FLAGS 0x0 - -#define M48_ADDR ((volatile unsigned char *) TOD_REG_BASE) - -int m48_tod_init(void) -{ - SYS_TOD_UNPROTECT(); - - M48_ADDR[CONTROL] = 0; - M48_ADDR[WATCH] = 0; - M48_ADDR[INTCTL] = 0; - - /* - * If the oscillator is currently stopped (as on a new part shipped - * from the factory), start it running. - * - * Here is an example of the TOD bytes on a brand new M48T59Y part: - * 00 00 00 00 00 00 00 00 00 88 8c c3 bf c8 f5 01 - */ - - if (M48_ADDR[SECOND] & 0x80) - M48_ADDR[SECOND] = 0; - - /* Is battery low */ - if ( M48_ADDR[FLAGS] & 0x10) { - printf("NOTICE: Battery low on Real-Time Clock (replace SNAPHAT).\n"); - } - - SYS_TOD_PROTECT(); - - return 0; -} - -/* - * m48_tod_set - */ - -static int to_bcd(int value) -{ - return value / 10 * 16 + value % 10; -} - -static int from_bcd(int value) -{ - return value / 16 * 10 + value % 16; -} - -static int day_of_week(int y, int m, int d) /* 0-6 ==> Sun-Sat */ -{ - static int t[] = {0, 3, 2, 5, 0, 3, 5, 1, 4, 6, 2, 4}; - y -= m < 3; - return (y + y/4 - y/100 + y/400 + t[m-1] + d) % 7; -} - -/* - * Note: the TOD should store the current GMT - */ - -int m48_tod_set(int year, /* 1980-2079 */ - int month, /* 01-12 */ - int day, /* 01-31 */ - int hour, /* 00-23 */ - int minute, /* 00-59 */ - int second) /* 00-59 */ - -{ - SYS_TOD_UNPROTECT(); - - M48_ADDR[CONTROL] |= 0x80; /* Set WRITE bit */ - - M48_ADDR[YEAR] = to_bcd(year % 100); - M48_ADDR[MONTH] = to_bcd(month); - M48_ADDR[DAY] = to_bcd(day); - M48_ADDR[DAY_OF_WEEK] = day_of_week(year, month, day) + 1; - M48_ADDR[HOUR] = to_bcd(hour); - M48_ADDR[MINUTE] = to_bcd(minute); - M48_ADDR[SECOND] = to_bcd(second); - - M48_ADDR[CONTROL] &= ~0x80; /* Clear WRITE bit */ - - SYS_TOD_PROTECT(); - - return 0; -} - -/* - * Note: the TOD should store the current GMT - */ - -int m48_tod_get(int *year, /* 1980-2079 */ - int *month, /* 01-12 */ - int *day, /* 01-31 */ - int *hour, /* 00-23 */ - int *minute, /* 00-59 */ - int *second) /* 00-59 */ -{ - int y; - - SYS_TOD_UNPROTECT(); - - M48_ADDR[CONTROL] |= 0x40; /* Set READ bit */ - - y = from_bcd(M48_ADDR[YEAR]); - *year = y < 80 ? 2000 + y : 1900 + y; - *month = from_bcd(M48_ADDR[MONTH]); - *day = from_bcd(M48_ADDR[DAY]); - /* day_of_week = M48_ADDR[DAY_OF_WEEK] & 0xf; */ - *hour = from_bcd(M48_ADDR[HOUR]); - *minute = from_bcd(M48_ADDR[MINUTE]); - *second = from_bcd(M48_ADDR[SECOND] & 0x7f); - - M48_ADDR[CONTROL] &= ~0x40; /* Clear READ bit */ - - SYS_TOD_PROTECT(); - - return 0; -} - -int m48_tod_get_second(void) -{ - return from_bcd(M48_ADDR[SECOND] & 0x7f); -} - -/* - * Watchdog function - * - * If usec is 0, the watchdog timer is disarmed. - * - * If usec is non-zero, the watchdog timer is armed (or re-armed) for - * approximately usec microseconds (if the exact requested usec is - * not supported by the chip, the next higher available value is used). - * - * Minimum watchdog timeout = 62500 usec - * Maximum watchdog timeout = 124 sec (124000000 usec) - */ - -void m48_watchdog_arm(int usec) -{ - int mpy, res; - - SYS_TOD_UNPROTECT(); - - if (usec == 0) { - res = 0; - mpy = 0; - } else if (usec < 2000000) { /* Resolution: 1/16s if below 2s */ - res = 0; - mpy = (usec + 62499) / 62500; - } else if (usec < 8000000) { /* Resolution: 1/4s if below 8s */ - res = 1; - mpy = (usec + 249999) / 250000; - } else if (usec < 32000000) { /* Resolution: 1s if below 32s */ - res = 2; - mpy = (usec + 999999) / 1000000; - } else { /* Resolution: 4s up to 124s */ - res = 3; - mpy = (usec + 3999999) / 4000000; - if (mpy > 31) - mpy = 31; - } - - M48_ADDR[WATCH] = (0x80 | /* Steer to RST signal (IRQ = N/C) */ - mpy << 2 | - res); - - SYS_TOD_PROTECT(); -} - -/* - * U-Boot RTC support. - */ -int -rtc_get( struct rtc_time *tmp ) -{ - m48_tod_get(&tmp->tm_year, - &tmp->tm_mon, - &tmp->tm_mday, - &tmp->tm_hour, - &tmp->tm_min, - &tmp->tm_sec); - tmp->tm_yday = 0; - tmp->tm_isdst= 0; - -#ifdef RTC_DEBUG - printf( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", - tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, - tmp->tm_hour, tmp->tm_min, tmp->tm_sec ); -#endif - - return 0; -} - -int rtc_set( struct rtc_time *tmp ) -{ - m48_tod_set(tmp->tm_year, /* 1980-2079 */ - tmp->tm_mon, /* 01-12 */ - tmp->tm_mday, /* 01-31 */ - tmp->tm_hour, /* 00-23 */ - tmp->tm_min, /* 00-59 */ - tmp->tm_sec); /* 00-59 */ - -#ifdef RTC_DEBUG - printf( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", - tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, - tmp->tm_hour, tmp->tm_min, tmp->tm_sec); -#endif - - return 0; -} - -void -rtc_reset (void) -{ - m48_tod_init(); -} diff --git a/board/bmw/ns16550.c b/board/bmw/ns16550.c deleted file mode 100644 index be455bbefe..0000000000 --- a/board/bmw/ns16550.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * COM1 NS16550 support - * originally from linux source (arch/powerpc/boot/ns16550.c) - * modified to use CONFIG_SYS_ISA_MEM and new defines - */ - -#include <config.h> -#include "ns16550.h" - -typedef struct NS16550 *NS16550_t; - -const NS16550_t COM_PORTS[] = - { (NS16550_t) ((CONFIG_SYS_EUMB_ADDR) + 0x4500), -(NS16550_t) ((CONFIG_SYS_EUMB_ADDR) + 0x4600) }; - -volatile struct NS16550 *NS16550_init (int chan, int baud_divisor) -{ - volatile struct NS16550 *com_port; - - com_port = (struct NS16550 *) COM_PORTS[chan]; - com_port->ier = 0x00; - com_port->lcr = LCR_BKSE; /* Access baud rate */ - com_port->dll = baud_divisor & 0xff; /* 9600 baud */ - com_port->dlm = (baud_divisor >> 8) & 0xff; - com_port->lcr = LCR_8N1; /* 8 data, 1 stop, no parity */ - com_port->mcr = MCR_RTS; /* RTS/DTR */ - com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR; /* Clear & enable FIFOs */ - return (com_port); -} - -void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor) -{ - com_port->ier = 0x00; - com_port->lcr = LCR_BKSE; /* Access baud rate */ - com_port->dll = baud_divisor & 0xff; /* 9600 baud */ - com_port->dlm = (baud_divisor >> 8) & 0xff; - com_port->lcr = LCR_8N1; /* 8 data, 1 stop, no parity */ - com_port->mcr = MCR_RTS; /* RTS/DTR */ - com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR; /* Clear & enable FIFOs */ -} - -void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c) -{ - while ((com_port->lsr & LSR_THRE) == 0); - com_port->thr = c; -} - -unsigned char NS16550_getc (volatile struct NS16550 *com_port) -{ - while ((com_port->lsr & LSR_DR) == 0); - return (com_port->rbr); -} - -int NS16550_tstc (volatile struct NS16550 *com_port) -{ - return ((com_port->lsr & LSR_DR) != 0); -} diff --git a/board/bmw/ns16550.h b/board/bmw/ns16550.h deleted file mode 100644 index 2087a4aabd..0000000000 --- a/board/bmw/ns16550.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * NS16550 Serial Port - * originally from linux source (arch/powerpc/boot/ns16550.h) - * modified slightly to - * have addresses as offsets from CONFIG_SYS_ISA_BASE - * added a few more definitions - * added prototypes for ns16550.c - * reduced no of com ports to 2 - * modifications (c) Rob Taylor, Flying Pig Systems. 2000. - * further modified to support the 8245 duart - * modifications (c) Paul Jimenez, Musenki, Inc. 2001. - */ - - -struct NS16550 { - unsigned char rbrthrdlb; /* 0 */ - unsigned char ierdmb; /* 1 */ - unsigned char iirfcrafr; /* 2 */ - unsigned char lcr; /* 3 */ - unsigned char mcr; /* 4 */ - unsigned char lsr; /* 5 */ - unsigned char msr; /* 6 */ - unsigned char scr; /* 7 */ - unsigned char reserved[2]; /* 8 & 9 */ - unsigned char dsr; /* 10 */ - unsigned char dcr; /* 11 */ -}; - - -#define rbr rbrthrdlb -#define thr rbrthrdlb -#define dll rbrthrdlb -#define ier ierdmb -#define dlm ierdmb -#define iir iirfcrafr -#define fcr iirfcrafr -#define afr iirfcrafr - -#define FCR_FIFO_EN 0x01 /*fifo enable */ -#define FCR_RXSR 0x02 /*receiver soft reset */ -#define FCR_TXSR 0x04 /*transmitter soft reset */ -#define FCR_DMS 0x08 /* DMA Mode Select */ - -#define MCR_RTS 0x02 /* Readyu to Send */ -#define MCR_LOOP 0x10 /* Local loopback mode enable */ -/* #define MCR_DTR 0x01 noton 8245 duart */ -/* #define MCR_DMA_EN 0x04 noton 8245 duart */ -/* #define MCR_TX_DFR 0x08 noton 8245 duart */ - -#define LCR_WLS_MSK 0x03 /* character length slect mask */ -#define LCR_WLS_5 0x00 /* 5 bit character length */ -#define LCR_WLS_6 0x01 /* 6 bit character length */ -#define LCR_WLS_7 0x02 /* 7 bit character length */ -#define LCR_WLS_8 0x03 /* 8 bit character length */ -#define LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */ -#define LCR_PEN 0x08 /* Parity eneble */ -#define LCR_EPS 0x10 /* Even Parity Select */ -#define LCR_STKP 0x20 /* Stick Parity */ -#define LCR_SBRK 0x40 /* Set Break */ -#define LCR_BKSE 0x80 /* Bank select enable - aka DLAB on 8245 */ - -#define LSR_DR 0x01 /* Data ready */ -#define LSR_OE 0x02 /* Overrun */ -#define LSR_PE 0x04 /* Parity error */ -#define LSR_FE 0x08 /* Framing error */ -#define LSR_BI 0x10 /* Break */ -#define LSR_THRE 0x20 /* Xmit holding register empty */ -#define LSR_TEMT 0x40 /* Xmitter empty */ -#define LSR_ERR 0x80 /* Error */ - -/* useful defaults for LCR*/ -#define LCR_8N1 0x03 - - -volatile struct NS16550 *NS16550_init (int chan, int baud_divisor); -void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c); -unsigned char NS16550_getc (volatile struct NS16550 *com_port); -int NS16550_tstc (volatile struct NS16550 *com_port); -void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor); diff --git a/board/bmw/serial.c b/board/bmw/serial.c deleted file mode 100644 index 08f449c864..0000000000 --- a/board/bmw/serial.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * (C) Copyright 2000 - * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <serial.h> -#include <linux/compiler.h> - -#include "ns16550.h" - -DECLARE_GLOBAL_DATA_PTR; - -#if CONFIG_CONS_INDEX == 1 -static struct NS16550 *console = - (struct NS16550 *) (CONFIG_SYS_EUMB_ADDR + 0x4500); -#elif CONFIG_CONS_INDEX == 2 -static struct NS16550 *console = - (struct NS16550 *) (CONFIG_SYS_EUMB_ADDR + 0x4500); -#else -#error no valid console defined -#endif - -extern ulong get_bus_freq (ulong); - -static int bmw_serial_init(void) -{ - int clock_divisor = gd->bus_clk / 16 / gd->baudrate; - - NS16550_init (CONFIG_CONS_INDEX - 1, clock_divisor); - - return (0); -} - -static void bmw_serial_putc(const char c) -{ - if (c == '\n') { - serial_putc ('\r'); - } - NS16550_putc (console, c); -} - -static void bmw_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - - -static int bmw_serial_getc(void) -{ - return NS16550_getc (console); -} - -static int bmw_serial_tstc(void) -{ - return NS16550_tstc (console); -} - -static void bmw_serial_setbrg(void) -{ - int clock_divisor = get_bus_freq (0) / 16 / gd->baudrate; - - NS16550_reinit (console, clock_divisor); -} - -static struct serial_device bmw_serial_drv = { - .name = "bmw_serial", - .start = bmw_serial_init, - .stop = NULL, - .setbrg = bmw_serial_setbrg, - .putc = bmw_serial_putc, - .puts = bmw_serial_puts, - .getc = bmw_serial_getc, - .tstc = bmw_serial_tstc, -}; - -void bmw_serial_initialize(void) -{ - serial_register(&bmw_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &bmw_serial_drv; -} diff --git a/board/c2mon/c2mon.c b/board/c2mon/c2mon.c deleted file mode 100644 index 348dfa0af3..0000000000 --- a/board/c2mon/c2mon.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFFFFF - -const uint sdram_table[] = -{ - /* - * Single Read. (Offset 0 in UPMA RAM) - */ - 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00, - 0x1FF77C47, /* last */ - /* - * SDRAM Initialization (offset 5 in UPMA RAM) - * - * This is no UPM entry point. The following definition uses - * the remaining space to establish an initialization - * sequence, which is executed by a RUN command. - * - */ - 0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */ - /* - * Burst Read. (Offset 8 in UPMA RAM) - */ - 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00, - 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Single Write. (Offset 18 in UPMA RAM) - */ - 0x1F07FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Burst Write. (Offset 20 in UPMA RAM) - */ - 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00, - 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Refresh (Offset 30 in UPMA RAM) - */ - 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, - 0xFFFFFC84, 0xFFFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Exception. (Offset 3c in UPMA RAM) - */ - 0x7FFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - char buf[64]; - int i; - int l = getenv_f("serial#", buf, sizeof(buf)); - - puts ("Board: TTTech C2MON "); - - for (i = 0; i < l; ++i) { - if (buf[i] == ' ') - break; - putc (buf[i]); - } - - putc ('\n'); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long reg; - long int size8, size9; - long int size = 0; - - upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table) / sizeof(uint)); - - /* - * Preliminary prescaler for refresh (depends on number of - * banks): This value is selected for four cycles every 62.4 us - * with two SDRAM banks or four cycles every 31.2 us with one - * bank. It will be adjusted after memory sizing. - */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K; - - memctl->memc_mar = 0x00000088; - - /* - * Map controller bank 2 the SDRAM bank 2 at physical address 0. - */ - memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; - memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; - - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ - - udelay (200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */ - udelay (1); - memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */ - udelay (1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay (1000); - - /* - * Check Bank 0 Memory Size - * - * try 8 column mode - */ - size8 = dram_size (CONFIG_SYS_MAMR_8COL, - SDRAM_BASE2_PRELIM, - SDRAM_MAX_SIZE); - - udelay (1000); - - /* - * try 9 column mode - */ - size9 = dram_size (CONFIG_SYS_MAMR_9COL, - SDRAM_BASE2_PRELIM, - SDRAM_MAX_SIZE); - - if (size8 < size9) { /* leave configuration at 9 columns */ - size = size9; -/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ - } else { /* back to 8 columns */ - size = size8; - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; - udelay (500); -/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ - } - - udelay (1000); - - /* - * Adjust refresh rate depending on SDRAM type - * For types > 128 MBit leave it at the current (fast) rate - */ - if (size < 0x02000000) { - /* reduce to 15.6 us (62.4 us / quad) */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K; - udelay (1000); - } - - /* - * Final mapping - */ - memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - - /* - * No bank 1 - * - * invalidate bank - */ - memctl->memc_br3 = 0; - - /* adjust refresh rate depending on SDRAM type, one bank */ - reg = memctl->memc_mptpr; - reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */ - memctl->memc_mptpr = reg; - - udelay (10000); - - return (size); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size(base, maxsize)); -} diff --git a/board/c2mon/flash.c b/board/c2mon/flash.c deleted file mode 100644 index d33cb6ce43..0000000000 --- a/board/c2mon/flash.c +++ /dev/null @@ -1,570 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -#ifndef CONFIG_ENV_ADDR -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -#endif - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size_b0, size_b1; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - } - - size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]); - - if (size_b1 > size_b0) { - printf ("## ERROR: " - "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n", - size_b1, size_b1<<20, - size_b0, size_b0<<20 - ); - flash_info[0].flash_id = FLASH_UNKNOWN; - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[0].sector_count = -1; - flash_info[1].sector_count = -1; - flash_info[0].size = 0; - flash_info[1].size = 0; - return (0); - } - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; - - /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1, - &flash_info[0]); -#endif - - if (size_b1) { - memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000); - memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) | - BR_MS_GPCM | BR_V; - - /* Re-do sizing to get full correct info */ - size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0), - &flash_info[1]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[1]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1, - &flash_info[1]); -#endif - } else { - memctl->memc_br1 = 0; /* invalidate bank */ - - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[1].sector_count = -1; - } - - flash_info[0].size = size_b0; - flash_info[1].size = size_b1; - - return (size_b0 + size_b1); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - /* Write auto select command: read Manufacturer ID */ - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00900090; - - value = addr[0]; - - switch (value) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[1]; /* device ID */ - - switch (value) { - case AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ -#if 0 /* enable when device IDs are available */ - case AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - - case AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - } - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0x00F000F0; /* reset bank */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00800080; - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long*)(info->start[sect]); - addr[0] = 0x00300030; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long*)(info->start[l_sect]); - while ((addr[0] & 0x00800080) != 0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (volatile unsigned long *)info->start[0]; - addr[0] = 0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long*)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00A000A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/c2mon/pcmcia.c b/board/c2mon/pcmcia.c deleted file mode 100644 index 2267829039..0000000000 --- a/board/c2mon/pcmcia.c +++ /dev/null @@ -1,282 +0,0 @@ -#include <common.h> -#include <mpc8xx.h> -#include <pcmcia.h> - -#undef CONFIG_PCMCIA - -#if defined(CONFIG_CMD_PCMCIA) -#define CONFIG_PCMCIA -#endif - -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) -#define CONFIG_PCMCIA -#endif - -#ifdef CONFIG_PCMCIA - -#define PCMCIA_BOARD_MSG "C2MON" - -static void cfg_ports (void) -{ - volatile immap_t *immap; - volatile cpm8xx_t *cp; - ushort sreg; - - immap = (immap_t *)CONFIG_SYS_IMMR; - cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm)); - - /* - * Configure Port C for TPS2211 PC-Card Power-Interface Switch - * - * Switch off all voltages, assert shutdown - */ - sreg = immap->im_ioport.iop_pcdat; - sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1); /* VAVPP => Hi-Z */ - sreg &= ~(TPS2211_VCCD0 | TPS2211_VCCD1); /* 3V and 5V off */ - immap->im_ioport.iop_pcdat = sreg; - - immap->im_ioport.iop_pcpar &= ~(TPS2211_OUTPUTS); - immap->im_ioport.iop_pcdir |= TPS2211_OUTPUTS; - - debug ("Set Port C: PAR: %04x DIR: %04x DAT: %04x\n", - immap->im_ioport.iop_pcpar, - immap->im_ioport.iop_pcdir, - immap->im_ioport.iop_pcdat); - - /* - * Configure Port B for TPS2211 PC-Card Power-Interface Switch - * - * Over-Current Input only - */ - cp->cp_pbpar &= ~(TPS2211_INPUTS); - cp->cp_pbdir &= ~(TPS2211_INPUTS); - - debug ("Set Port B: PAR: %08x DIR: %08x DAT: %08x\n", - cp->cp_pbpar, cp->cp_pbdir, cp->cp_pbdat); -} - -int pcmcia_hardware_enable(int slot) -{ - volatile immap_t *immap; - volatile cpm8xx_t *cp; - volatile pcmconf8xx_t *pcmp; - volatile sysconf8xx_t *sysp; - uint reg, pipr, mask; - ushort sreg; - int i; - - debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot); - - udelay(10000); - - immap = (immap_t *)CONFIG_SYS_IMMR; - sysp = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf)); - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); - cp = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm)); - - /* Configure Ports for TPS2211A PC-Card Power-Interface Switch */ - cfg_ports (); - - /* - * Configure SIUMCR to enable PCMCIA port B - * (VFLS[0:1] are not used for debugging, we connect FRZ# instead) - */ - sysp->sc_siumcr &= ~SIUMCR_DBGC11; /* set DBGC to 00 */ - - /* clear interrupt state, and disable interrupts */ - pcmp->pcmc_pscr = PCMCIA_MASK(_slot_); - pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_); - - /* - * Disable interrupts, DMA, and PCMCIA buffers - * (isolate the interface) and assert RESET signal - */ - debug ("Disable PCMCIA buffers and assert RESET\n"); - reg = 0; - reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - udelay(500); - - /* - * Make sure there is a card in the slot, then configure the interface. - */ - udelay(10000); - debug ("[%d] %s: PIPR(%p)=0x%x\n", - __LINE__,__FUNCTION__, - &(pcmp->pcmc_pipr),pcmp->pcmc_pipr); - if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) { - printf (" No Card found\n"); - return (1); - } - - /* - * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z - */ - mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot); - pipr = pcmp->pcmc_pipr; - debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n", - pipr, - (reg&PCMCIA_VS1(slot))?"n":"ff", - (reg&PCMCIA_VS2(slot))?"n":"ff"); - - sreg = immap->im_ioport.iop_pcdat; - if ((pipr & mask) == mask) { - sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1 | /* VAVPP => Hi-Z */ - TPS2211_VCCD1); /* 5V on */ - sreg &= ~(TPS2211_VCCD0); /* 3V off */ - puts (" 5.0V card found: "); - } else { - sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1 | /* VAVPP => Hi-Z */ - TPS2211_VCCD0); /* 3V on */ - sreg &= ~(TPS2211_VCCD1); /* 5V off */ - puts (" 3.3V card found: "); - } - - debug ("\nPC DAT: %04x -> 3.3V %s 5.0V %s\n", - sreg, - ( (sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) ? "on" : "off", - (!(sreg & TPS2211_VCCD0) && (sreg & TPS2211_VCCD1)) ? "on" : "off" - ); - - immap->im_ioport.iop_pcdat = sreg; - - /* Wait 500 ms; use this to check for over-current */ - for (i=0; i<5000; ++i) { - if ((cp->cp_pbdat & TPS2211_OC) == 0) { - printf (" *** Overcurrent - Safety shutdown ***\n"); - immap->im_ioport.iop_pcdat &= ~(TPS2211_VCCD0|TPS2211_VCCD1); - return (1); - } - udelay (100); - } - - debug ("Enable PCMCIA buffers and stop RESET\n"); - reg = PCMCIA_PGCRX(_slot_); - reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - - udelay(250000); /* some cards need >150 ms to come up :-( */ - - debug ("# hardware_enable done\n"); - - return (0); -} - - -#if defined(CONFIG_CMD_PCMCIA) -int pcmcia_hardware_disable(int slot) -{ - volatile immap_t *immap; - volatile cpm8xx_t *cp; - volatile pcmconf8xx_t *pcmp; - u_long reg; - - debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot); - - immap = (immap_t *)CONFIG_SYS_IMMR; - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); - - /* Configure PCMCIA General Control Register */ - debug ("Disable PCMCIA buffers and assert RESET\n"); - reg = 0; - reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - - /* ALl voltages off / Hi-Z */ - immap->im_ioport.iop_pcdat |= (TPS2211_VPPD0 | TPS2211_VPPD1 | - TPS2211_VCCD0 | TPS2211_VCCD1 ); - - udelay(10000); - - return (0); -} -#endif - - -int pcmcia_voltage_set(int slot, int vcc, int vpp) -{ - volatile immap_t *immap; - volatile pcmconf8xx_t *pcmp; - u_long reg; - ushort sreg; - - debug ("voltage_set: " - PCMCIA_BOARD_MSG - " Slot %c, Vcc=%d.%d, Vpp=%d.%d\n", - 'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10); - - immap = (immap_t *)CONFIG_SYS_IMMR; - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia)); - /* - * Disable PCMCIA buffers (isolate the interface) - * and assert RESET signal - */ - debug ("Disable PCMCIA buffers and assert RESET\n"); - reg = PCMCIA_PGCRX(_slot_); - reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - udelay(500); - - /* - * Configure Port C pins for - * 5 Volts Enable and 3 Volts enable, - * Turn all power pins to Hi-Z - */ - debug ("PCMCIA power OFF\n"); - cfg_ports (); /* Enables switch, but all in Hi-Z */ - - sreg = immap->im_ioport.iop_pcdat; - sreg |= TPS2211_VPPD0 | TPS2211_VPPD1; /* VAVPP always Hi-Z */ - - switch(vcc) { - case 0: break; /* Switch off */ - case 33: sreg |= TPS2211_VCCD0; /* Switch on 3.3V */ - sreg &= ~TPS2211_VCCD1; - break; - case 50: sreg &= ~TPS2211_VCCD0; /* Switch on 5.0V */ - sreg |= TPS2211_VCCD1; - break; - default: goto done; - } - - /* Checking supported voltages */ - - debug ("PIPR: 0x%x --> %s\n", - pcmp->pcmc_pipr, - (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V"); - - immap->im_ioport.iop_pcdat = sreg; - -#ifdef DEBUG -{ - char *s; - - if ((sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) { - s = "at 3.3V"; - } else if (!(sreg & TPS2211_VCCD0) && (sreg & TPS2211_VCCD1)) { - s = "at 5.0V"; - } else { - s = "down"; - } - printf ("PCMCIA powered %s\n", s); -} -#endif - -done: - debug ("Enable PCMCIA buffers and stop RESET\n"); - reg = PCMCIA_PGCRX(_slot_); - reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */ - reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */ - PCMCIA_PGCRX(_slot_) = reg; - udelay(500); - - debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n", - slot+'A'); - return (0); -} - -#endif /* CONFIG_PCMCIA */ diff --git a/board/c2mon/u-boot.lds.debug b/board/c2mon/u-boot.lds.debug deleted file mode 100644 index c7711028ad..0000000000 --- a/board/c2mon/u-boot.lds.debug +++ /dev/null @@ -1,135 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/cobra5272/u-boot.lds b/board/cobra5272/u-boot.lds index c4039edf43..d054f20bce 100644 --- a/board/cobra5272/u-boot.lds +++ b/board/cobra5272/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/cogent/serial.c b/board/cogent/serial.c index cd4a976f89..20631d162d 100644 --- a/board/cogent/serial.c +++ b/board/cogent/serial.c @@ -68,12 +68,6 @@ static void cogent_serial_putc(const char c) cma_mb_reg_write (&mbsp->ser_thr, c); } -static void cogent_serial_puts(const char *s) -{ - while (*s != '\0') - serial_putc (*s++); -} - static int cogent_serial_getc(void) { cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE; @@ -96,7 +90,7 @@ static struct serial_device cogent_serial_drv = { .stop = NULL, .setbrg = cogent_serial_setbrg, .putc = cogent_serial_putc, - .puts = cogent_serial_puts, + .puts = default_serial_puts, .getc = cogent_serial_getc, .tstc = cogent_serial_tstc, }; diff --git a/board/cogent/u-boot.lds b/board/cogent/u-boot.lds index 2393d8d8af..2a6027f814 100644 --- a/board/cogent/u-boot.lds +++ b/board/cogent/u-boot.lds @@ -70,9 +70,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/cogent/u-boot.lds.debug b/board/cogent/u-boot.lds.debug index 99c48f28d4..dc8c4e958f 100644 --- a/board/cogent/u-boot.lds.debug +++ b/board/cogent/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/compal/paz00/Makefile b/board/compal/paz00/Makefile index 7f7287ee9a..fa5c510340 100644 --- a/board/compal/paz00/Makefile +++ b/board/compal/paz00/Makefile @@ -20,9 +20,11 @@ $(shell mkdir -p $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := $(BOARD).o -COBJS += ../../nvidia/common/board.o +COBJS-y := $(BOARD).o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/compulab/trimslice/Makefile b/board/compulab/trimslice/Makefile index ff0787967d..cc844d2e07 100644 --- a/board/compulab/trimslice/Makefile +++ b/board/compulab/trimslice/Makefile @@ -28,9 +28,11 @@ $(shell mkdir -p $(obj)../../nvidia/common) LIB = $(obj)lib$(BOARD).o -COBJS := $(BOARD).o -COBJS += ../../nvidia/common/board.o +COBJS-y := $(BOARD).o +include ../../nvidia/common/common.mk + +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/cpc45/Makefile b/board/cpc45/Makefile index 5c6b78f704..ac1d17440f 100644 --- a/board/cpc45/Makefile +++ b/board/cpc45/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS = $(BOARD).o flash.o plx9030.o pd67290.o +COBJS = $(BOARD).o flash.o plx9030.o pd67290.o ide.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c index 1178822db3..22008066e6 100644 --- a/board/cpc45/cpc45.c +++ b/board/cpc45/cpc45.c @@ -260,21 +260,6 @@ int pcmcia_init(void) #endif -# ifdef CONFIG_IDE_LED -void ide_led (uchar led, uchar status) -{ - u_char val; - /* We have one PCMCIA slot and use LED H4 for the IDE Interface */ - val = readb(BCSR_BASE + 0x04); - if (status) { /* led on */ - val |= B_CTRL_LED0; - } else { - val &= ~B_CTRL_LED0; - } - writeb(val, BCSR_BASE + 0x04); -} -# endif - int board_eth_init(bd_t *bis) { return pci_eth_init(bis); diff --git a/board/cpc45/ide.c b/board/cpc45/ide.c new file mode 100644 index 0000000000..03be59f974 --- /dev/null +++ b/board/cpc45/ide.c @@ -0,0 +1,145 @@ +/* + * (C) Copyright 2001 + * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. + * + * (C) Copyright 2000-2011 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ide.h> +#include <ata.h> +#include <asm/io.h> + +#define EIEIO __asm__ volatile ("eieio") +#define SYNC __asm__ volatile ("sync") + +void ide_input_swap_data(int dev, ulong *sect_buf, int words) +{ + uchar i; + volatile uchar *pbuf_even = + (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); + volatile uchar *pbuf_odd = + (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); + ushort *dbuf = (ushort *) sect_buf; + + while (words--) { + for (i = 0; i < 2; i++) { + *(((uchar *) (dbuf)) + 1) = *pbuf_even; + *(uchar *) dbuf = *pbuf_odd; + dbuf += 1; + } + } +} + +void ide_input_data(int dev, ulong *sect_buf, int words) +{ + uchar *dbuf; + volatile uchar *pbuf_even; + volatile uchar *pbuf_odd; + + pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); + pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); + dbuf = (uchar *) sect_buf; + while (words--) { + *dbuf++ = *pbuf_even; + EIEIO; + SYNC; + *dbuf++ = *pbuf_odd; + EIEIO; + SYNC; + *dbuf++ = *pbuf_even; + EIEIO; + SYNC; + *dbuf++ = *pbuf_odd; + EIEIO; + SYNC; + } +} + +void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts) +{ + uchar *dbuf; + volatile uchar *pbuf_even; + volatile uchar *pbuf_odd; + + pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); + pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); + dbuf = (uchar *) sect_buf; + while (shorts--) { + EIEIO; + *dbuf++ = *pbuf_even; + EIEIO; + *dbuf++ = *pbuf_odd; + } +} + +void ide_output_data(int dev, const ulong *sect_buf, int words) +{ + uchar *dbuf; + volatile uchar *pbuf_even; + volatile uchar *pbuf_odd; + + pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); + pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); + dbuf = (uchar *) sect_buf; + while (words--) { + EIEIO; + *pbuf_even = *dbuf++; + EIEIO; + *pbuf_odd = *dbuf++; + EIEIO; + *pbuf_even = *dbuf++; + EIEIO; + *pbuf_odd = *dbuf++; + } +} + +void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts) +{ + uchar *dbuf; + volatile uchar *pbuf_even; + volatile uchar *pbuf_odd; + + pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); + pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); + dbuf = (uchar *) sect_buf; + while (shorts--) { + EIEIO; + *pbuf_even = *dbuf++; + EIEIO; + *pbuf_odd = *dbuf++; + } +} + +void ide_led(uchar led, uchar status) +{ + u_char val; + /* We have one PCMCIA slot and use LED H4 for the IDE Interface */ + val = readb(BCSR_BASE + 0x04); + if (status) /* led on */ + val |= B_CTRL_LED0; + else + val &= ~B_CTRL_LED0; + + writeb(val, BCSR_BASE + 0x04); +} + diff --git a/board/cray/L1/u-boot.lds.debug b/board/cray/L1/u-boot.lds.debug index fcf8ebbf8e..d7a2e56008 100644 --- a/board/cray/L1/u-boot.lds.debug +++ b/board/cray/L1/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds index 3b10114354..8a306d6076 100644 --- a/board/dave/PPChameleonEVB/u-boot.lds +++ b/board/dave/PPChameleonEVB/u-boot.lds @@ -74,9 +74,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds index 6f6e065a9f..c5fd93c0f7 100644 --- a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds +++ b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds @@ -47,6 +47,12 @@ SECTIONS . = ALIGN(4); .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } >.sram + . = ALIGN(4); .rel.dyn : { __rel_dyn_start = .; diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds index b3a41afc42..86dc172ee2 100644 --- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds +++ b/board/davinci/da8xxevm/u-boot-spl-hawk.lds @@ -58,6 +58,11 @@ SECTIONS } . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } + + . = ALIGN(4); __rel_dyn_start = .; __rel_dyn_end = .; __dynsym_start = .; diff --git a/board/dbau1x00/u-boot.lds b/board/dbau1x00/u-boot.lds index 4a59cea80f..8a871cff49 100644 --- a/board/dbau1x00/u-boot.lds +++ b/board/dbau1x00/u-boot.lds @@ -54,10 +54,9 @@ SECTIONS .sdata : { *(.sdata*) } - .u_boot_cmd : { - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> } uboot_end_data = .; diff --git a/board/dvlhost/u-boot.lds b/board/dvlhost/u-boot.lds index 01ec39008d..1bd1700aa2 100644 --- a/board/dvlhost/u-boot.lds +++ b/board/dvlhost/u-boot.lds @@ -54,11 +54,11 @@ SECTIONS *(.got) } . =.; - __u_boot_cmd_start =.; - .u_boot_cmd : { - *(.u_boot_cmd) + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> } - __u_boot_cmd_end =.; . = ALIGN (4); .rel.dyn : { diff --git a/board/eltec/mhpc/u-boot.lds b/board/eltec/mhpc/u-boot.lds index fd4e8a50d5..c8d38942c9 100644 --- a/board/eltec/mhpc/u-boot.lds +++ b/board/eltec/mhpc/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/eltec/mhpc/u-boot.lds.debug b/board/eltec/mhpc/u-boot.lds.debug index c7711028ad..92796e6744 100644 --- a/board/eltec/mhpc/u-boot.lds.debug +++ b/board/eltec/mhpc/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/emk/top860/u-boot.lds b/board/emk/top860/u-boot.lds index fb06648663..22626d392a 100644 --- a/board/emk/top860/u-boot.lds +++ b/board/emk/top860/u-boot.lds @@ -67,9 +67,11 @@ SECTIONS . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/ep88x/u-boot.lds b/board/ep88x/u-boot.lds index 332b35a57d..1dcc22a191 100644 --- a/board/ep88x/u-boot.lds +++ b/board/ep88x/u-boot.lds @@ -62,9 +62,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c index aa001df0b8..4ef10e7d72 100644 --- a/board/esd/cpci750/ide.c +++ b/board/esd/cpci750/ide.c @@ -30,7 +30,6 @@ #include <ide.h> #include <pci.h> -extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS]; int cpci_hd_type; int ata_device(int dev) diff --git a/board/esd/cpci750/serial.c b/board/esd/cpci750/serial.c index 25f8950e9a..160e0e0ae0 100644 --- a/board/esd/cpci750/serial.c +++ b/board/esd/cpci750/serial.c @@ -75,21 +75,13 @@ static void cpci750_serial_setbrg(void) galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate); } - -static void cpci750_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device cpci750_serial_drv = { .name = "cpci750_serial", .start = cpci750_serial_init, .stop = NULL, .setbrg = cpci750_serial_setbrg, .putc = cpci750_serial_putc, - .puts = cpci750_serial_puts, + .puts = default_serial_puts, .getc = cpci750_serial_getc, .tstc = cpci750_serial_tstc, }; diff --git a/board/esd/dasa_sim/u-boot.lds b/board/esd/dasa_sim/u-boot.lds index b15948d34c..7eca18390b 100644 --- a/board/esd/dasa_sim/u-boot.lds +++ b/board/esd/dasa_sim/u-boot.lds @@ -73,9 +73,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/esd/pmc440/u-boot-nand.lds b/board/esd/pmc440/u-boot-nand.lds index 71f0fd2c3e..ca7df4592e 100644 --- a/board/esd/pmc440/u-boot-nand.lds +++ b/board/esd/pmc440/u-boot-nand.lds @@ -102,10 +102,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/esd/tasreg/u-boot.lds b/board/esd/tasreg/u-boot.lds index f697ccd515..0d6a0f3a3b 100644 --- a/board/esd/tasreg/u-boot.lds +++ b/board/esd/tasreg/u-boot.lds @@ -65,9 +65,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/esteem192e/u-boot.lds b/board/esteem192e/u-boot.lds index 163b83d819..fe5cf095fc 100644 --- a/board/esteem192e/u-boot.lds +++ b/board/esteem192e/u-boot.lds @@ -36,7 +36,6 @@ SECTIONS arch/powerpc/cpu/mpc8xx/traps.o (.text*) net/libnet.o (.text*) board/esteem192e/libesteem192e.o (.text*) - *(.text.*printf) . = env_offset; common/env_embedded.o (.text*) @@ -75,9 +74,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/etx094/etx094.c b/board/etx094/etx094.c deleted file mode 100644 index abefe4a482..0000000000 --- a/board/etx094/etx094.c +++ /dev/null @@ -1,384 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); -static void read_hw_vers (void); - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFFFFF - -const uint sdram_table[] = { - - /* single read (offset 0x00 in upm ram) */ - - 0xEECEFC24, 0x100DFC24, 0xE02FBC04, 0x01AA7C04, - 0x1FB5FC00, 0xFFFFFC05, _NOT_USED_, _NOT_USED_, - - /* burst read (offset 0x08 in upm ram) */ - - 0xEECEFC24, 0x100DFC24, 0xE0FFBC04, 0x10FF7C04, - 0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC00, 0xFFFFFC00, - 0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* single write (offset 0x18 in upm ram) */ - - 0xEECEFC24, 0x100DFC24, 0xE02BBC04, 0x01A27C00, - 0xEFAAFC04, 0x1FB5FC05, _NOT_USED_, _NOT_USED_, - - /* burst write (offset 0x20 in upm ram) */ - - 0xEECEFC24, 0x103DFC24, 0xE0FBBC00, 0x10F77C00, - 0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC04, 0xFFFFFC05, - - /* init part1 (offset 0x28 in upm ram) */ - - 0xEFFAFC3C, 0x1FF4FC34, 0xEFFCBC34, 0x1FFC3C34, - 0xFFFC3C35, _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* refresh (offset 0x30 in upm ram) */ - - 0xEFFEBC0C, 0x1FFD7C04, 0xFFFFFC04, 0xFFFFFC05, - - /* init part2 (offset 0x34 in upm ram) */ - - 0xFFFEBC04, 0xEFFC3CB4, 0x1FFC3C34, 0xFFFC3C34, - 0xFFFC3C34, 0xEFE83CB4, 0x1FB57C35, _NOT_USED_, - - /* exception (offset 0x3C in upm ram) */ - - 0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_, - -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - * - * Test ETX ID string (ETX_xxx...) - * - * Return 1 always. - */ - -int checkboard (void) -{ - char buf[64]; - int i; - int l = getenv_f("serial#", buf, sizeof(buf)); - - puts ("Board: "); - -#ifdef SB_ETX094 - gd->board_type = 0; /* 0 = 2SDRAM-Device */ -#else - gd->board_type = 1; /* 1 = 1SDRAM-Device */ -#endif - - if (l < 0 || strncmp(buf, "ETX_", 4)) { - puts ("### No HW ID - assuming ETX_094\n"); - read_hw_vers (); - return (0); - } - - for (i = 0; i < l; ++i) { - if (buf[i] == ' ') - break; - putc(buf[i]); - } - putc ('\n'); - - read_hw_vers (); - return (0); -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size_b0, size_b1, size8, size9; - - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - /* - * Preliminary prescaler for refresh (depends on number of - * banks): This value is selected for four cycles every 62.4 us - * with two SDRAM banks or four cycles every 31.2 us with one - * bank. It will be adjusted after memory sizing. - */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K; /* MPTPR_PTP_DIV32 0x0200 */ - - /* A3(SDRAM)=0 => Bursttype = Sequential - * A2-A0(SDRAM)=010 => Burst length = 4 - * A4-A6(SDRAM)=010 => CasLat=2 - */ - memctl->memc_mar = 0x00000088; - - /* - * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at - * preliminary addresses - these have to be modified after the - * SDRAM size has been determined. - */ - memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; - memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; - - if (board_type == 0) { /* "L" type boards have only one bank SDRAM */ - memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; - memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; - } - - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ - - udelay (200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mcr = 0x80004128; /* SDRAM bank 0 (CS2) - Init Part 1 */ - memctl->memc_mcr = 0x80004734; /* SDRAM bank 0 (CS2) - Init Part 2 */ - udelay (1); - - if (board_type == 0) { /* "L" type boards have only one bank SDRAM */ - memctl->memc_mcr = 0x80006128; /* SDRAM bank 1 (CS3) - Init Part 1 */ - memctl->memc_mcr = 0x80006734; /* SDRAM bank 1 (CS3) - Init Part 2 */ - udelay (1); - } - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay (1000); - - /* - * Check Bank 0 Memory Size for re-configuration - * - * try 8 column mode - */ - size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM, - SDRAM_MAX_SIZE); - - udelay (1000); - - /* - * try 9 column mode - */ - size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM, - SDRAM_MAX_SIZE); - - if (size8 < size9) { /* leave configuration at 9 columns */ - size_b0 = size9; -/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ - } else { /* back to 8 columns */ - size_b0 = size8; - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; - udelay (500); -/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ - } - - if (board_type == 0) { /* "L" type boards have only one bank SDRAM */ - /* - * Check Bank 1 Memory Size - * use current column settings - * [9 column SDRAM may also be used in 8 column mode, - * but then only half the real size will be used.] - */ - size_b1 = - dram_size (memctl->memc_mamr, (long *) SDRAM_BASE3_PRELIM, - SDRAM_MAX_SIZE); -/* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */ - } else { - size_b1 = 0; - } - - udelay (1000); - - /* - * Adjust refresh rate depending on SDRAM type, both banks - * For types > 128 MBit leave it at the current (fast) rate - */ - if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) { - /* reduce to 15.6 us (62.4 us / quad) */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K; /*DIV16 */ - udelay (1000); - } - - /* - * Final mapping: map bigger bank first - */ - if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */ - - memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - memctl->memc_br3 = - (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - - if (size_b0 > 0) { - /* - * Position Bank 0 immediately above Bank 1 - */ - memctl->memc_or2 = - ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - memctl->memc_br2 = - ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) - + size_b1; - } else { - unsigned long reg; - - /* - * No bank 0 - * - * invalidate bank - */ - memctl->memc_br2 = 0; - - /* adjust refresh rate depending on SDRAM type, one bank */ - reg = memctl->memc_mptpr; - reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */ - memctl->memc_mptpr = reg; - } - - } else { /* SDRAM Bank 0 is bigger - map first */ - - memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - memctl->memc_br2 = - (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - - if (size_b1 > 0) { - /* - * Position Bank 1 immediately above Bank 0 - */ - memctl->memc_or3 = - ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - memctl->memc_br3 = - ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) - + size_b0; - } else { - unsigned long reg; - - /* - * No bank 1 - * - * invalidate bank - */ - memctl->memc_br3 = 0; - - /* adjust refresh rate depending on SDRAM type, one bank */ - reg = memctl->memc_mptpr; - reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */ - memctl->memc_mptpr = reg; - } - } - - udelay (10000); - - return (size_b0 + size_b1); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size(base, maxsize)); -} - -/* ------------------------------------------------------------------------- */ - -/* HW-ID Table (Bits: 2^9;2^7;2^5) */ -#define HW_ID_0 0x0000 -#define HW_ID_1 0x0020 -#define HW_ID_2 0x0080 -#define HW_ID_3 0x00a0 -#define HW_ID_4 0x0200 -#define HW_ID_5 0x0220 -#define HW_ID_6 0x0280 -#define HW_ID_7 0x02a0 - -void read_hw_vers () -{ - unsigned short rd_msk = 0x02A0; - - /* HW-ID pin-definition */ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - immr->im_ioport.iop_pddir &= ~(rd_msk); - immr->im_ioport.iop_pdpar &= ~(rd_msk); - - /* debug printf("State of PD: %x\n",immr->im_ioport.iop_pddat); */ - - /* Check the HW-ID */ - printf ("HW-Version: "); - switch (immr->im_ioport.iop_pddat & rd_msk) { - case HW_ID_0: - printf ("V0.1 - V0.3 / W97238-Q3162-A1-1-2\n"); - break; - case HW_ID_1: - printf ("V0.9 / W50037-Q1-D6-1\n"); - break; - case HW_ID_2: - printf ("NOT USED - assuming ID#2\n"); - break; - case HW_ID_3: - printf ("NOT USED - assuming ID#3\n"); - break; - case HW_ID_4: - printf ("NOT USED - assuming ID#4\n"); - break; - case HW_ID_5: - printf ("NOT USED - assuming ID#5\n"); - break; - case HW_ID_6: - printf ("NOT USED - assuming ID#6\n"); - break; - case HW_ID_7: - printf ("NOT USED - assuming ID#7\n"); - break; - default: - printf ("###Error###\n"); - break; - } -} - -/* ------------------------------------------------------------------------- */ diff --git a/board/etx094/flash.c b/board/etx094/flash.c deleted file mode 100644 index 0958e73d60..0000000000 --- a/board/etx094/flash.c +++ /dev/null @@ -1,687 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long *addr, flash_info_t *info); -static int write_word(flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets(ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init(void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size_b0; - int i; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) - flash_info[i].flash_id = FLASH_UNKNOWN; - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - } - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); -#ifdef CONFIG_FLASH_16BIT - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | - BR_MS_GPCM | BR_V | BR_PS_16; /* 16 Bit data port */ -#else - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | - BR_MS_GPCM | BR_V; -#endif - - /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, - &flash_info[0]); - - flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - - memctl->memc_br1 = 0; /* invalidate bank 1 */ - - flash_info[0].size = size_b0; - - return size_b0; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets(ulong base, flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) - return; - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00002000); - - return; - } - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ -#ifdef CONFIG_FLASH_16BIT - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000) - 0x00030000; -#else - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00020000) - 0x00060000; -#endif - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) - info->start[i] = base + i * 0x00020000; - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info(flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf("AMD "); - break; - case FLASH_MAN_FUJ: - printf("FUJITSU "); - break; - case FLASH_MAN_SST: - printf("SST "); - break; - case FLASH_MAN_STM: - printf("STM "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM400B: - printf("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: - printf("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: - printf("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: - printf("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: - printf("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: - printf("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: - printf("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: - printf("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - case FLASH_SST200A: - printf("39xF200A (2M = 128K x 16)\n"); - break; - case FLASH_SST400A: - printf("39xF400A (4M = 256K x 16)\n"); - break; - case FLASH_SST800A: - printf("39xF800A (8M = 512K x 16)\n"); - break; - case FLASH_STM800AB: - printf("M29W800AB (8M = 512K x 16)\n"); - break; - default: - printf("Unknown Chip Type\n"); - break; - } - - printf(" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf("\n "); - printf(" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size(vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - /* Write auto select command: read Manufacturer ID */ -#ifdef CONFIG_FLASH_16BIT - vu_short *s_addr = (vu_short *)addr; - s_addr[0x5555] = 0x00AA; - s_addr[0x2AAA] = 0x0055; - s_addr[0x5555] = 0x0090; - value = s_addr[0]; - value = value|(value<<16); -#else - addr[0x5555] = 0x00AA00AA; - addr[0x2AAA] = 0x00550055; - addr[0x5555] = 0x00900090; - value = addr[0]; -#endif - - switch (value) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - case SST_MANUFACT: - info->flash_id = FLASH_MAN_SST; - break; - case STM_MANUFACT: - info->flash_id = FLASH_MAN_STM; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return 0; /* no or unknown flash */ - } -#ifdef CONFIG_FLASH_16BIT - value = s_addr[1]; - value = value|(value<<16); -#else - value = addr[1]; /* device ID */ -#endif - - switch (value) { - case AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; -#ifdef CONFIG_FLASH_16BIT - info->sector_count = 19; - info->size = 0x00100000; /* => 1 MB */ -#else - info->sector_count = 19; - info->size = 0x00200000; /* => 2 MB */ -#endif - break; - - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; -#ifdef CONFIG_FLASH_16BIT - info->sector_count = 35; - info->size = 0x00200000; /* => 2 MB */ -#else - info->sector_count = 35; - info->size = 0x00400000; /* => 4 MB */ -#endif - - break; - case SST_ID_xF200A: - info->flash_id += FLASH_SST200A; - info->sector_count = 64; /* 39xF200A (2M = 128K x 16) */ - info->size = 0x00080000; - break; - case SST_ID_xF400A: - info->flash_id += FLASH_SST400A; - info->sector_count = 128; /* 39xF400A (4M = 256K x 16) */ - info->size = 0x00100000; - break; - case SST_ID_xF800A: - info->flash_id += FLASH_SST800A; - info->sector_count = 256; /* 39xF800A (8M = 512K x 16) */ - info->size = 0x00200000; - break; /* => 2 MB */ - case STM_ID_x800AB: - info->flash_id += FLASH_STM800AB; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - default: - info->flash_id = FLASH_UNKNOWN; - return 0; /* => no or unknown flash */ - - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00002000); - } else { /* AMD and Fujitsu types */ - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ -#ifdef CONFIG_FLASH_16BIT - - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) - info->start[i] = base + - (i * 0x00010000) - 0x00030000; -#else - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) - info->start[i] = base + - (i * 0x00020000) - 0x00060000; -#endif - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) - info->start[i] = base + i * 0x00020000; - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* - * read sector protection at sector address: - * (A7 .. A0) = 0x02 - * D0 = 1 if protected - */ -#ifdef CONFIG_FLASH_16BIT - s_addr = (volatile unsigned short *)(info->start[i]); - info->protect[i] = s_addr[2] & 1; -#else - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[2] & 1; -#endif - } - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { -#ifdef CONFIG_FLASH_16BIT - s_addr = (volatile unsigned short *)(info->start[0]); - *s_addr = 0x00F0; /* reset bank */ -#else - addr = (volatile unsigned long *)info->start[0]; - *addr = 0x00F000F0; /* reset bank */ -#endif - - } - return info->size; -} - -int flash_erase(flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long *)(info->start[0]); - int flag, prot, sect; - ulong start, now, last; -#ifdef CONFIG_FLASH_16BIT - vu_short *s_addr = (vu_short *)addr; -#endif - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) - printf("- missing\n"); - else - printf("- no sectors to erase\n"); - return 1; - } -/*#ifndef CONFIG_FLASH_16BIT - ulong type; - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_SST) && (type != FLASH_MAN_STM)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return; - } -#endif*/ - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) - prot++; - } - - if (prot) { - printf("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf("\n"); - } - - start = get_timer(0); - last = start; - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ -#ifdef CONFIG_FLASH_16BIT - vu_short *s_sect_addr = (vu_short *)(info->start[sect]); -#else - vu_long *sect_addr = (vu_long *)(info->start[sect]); -#endif - /* Disable interrupts which might cause a timeout */ - flag = disable_interrupts(); - -#ifdef CONFIG_FLASH_16BIT - - /*printf("\ns_sect_addr=%x",s_sect_addr);*/ - s_addr[0x5555] = 0x00AA; - s_addr[0x2AAA] = 0x0055; - s_addr[0x5555] = 0x0080; - s_addr[0x5555] = 0x00AA; - s_addr[0x2AAA] = 0x0055; - s_sect_addr[0] = 0x0030; -#else - addr[0x5555] = 0x00AA00AA; - addr[0x2AAA] = 0x00550055; - addr[0x5555] = 0x00800080; - addr[0x5555] = 0x00AA00AA; - addr[0x2AAA] = 0x00550055; - sect_addr[0] = 0x00300030; -#endif - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay(1000); - -#ifdef CONFIG_FLASH_16BIT - while ((s_sect_addr[0] & 0x0080) != 0x0080) { -#else - while ((sect_addr[0] & 0x00800080) != 0x00800080) { -#endif - now = get_timer(start); - if (now > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return 1; - } - /* show every second that we're waiting */ - if ((now - last) > 1000) { - putc('.'); - last = now; - } - } - } - } - - /* reset to read mode */ - addr = (volatile unsigned long *)info->start[0]; -#ifdef CONFIG_FLASH_16BIT - s_addr[0] = 0x00F0; /* reset bank */ -#else - addr[0] = 0x00F000F0; /* reset bank */ -#endif - - printf(" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - if (info->flash_id == FLASH_UNKNOWN) - return 4; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - l = addr - wp; - - if (l != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) - data = (data << 8) | (*(uchar *)cp); - - for (; i < 4 && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < 4; ++i, ++cp) - data = (data << 8) | (*(uchar *)cp); - - rc = write_word(info, wp, data); - - if (rc != 0) - return rc; - - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i = 0; i < 4; ++i) - data = (data << 8) | *src++; - - rc = write_word(info, wp, data); - if (rc != 0) - return rc; - - wp += 4; - cnt -= 4; - } - - if (cnt == 0) - return 0; - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < 4; ++i, ++cp) - data = (data << 8) | (*(uchar *)cp); - - return write_word(info, wp, data); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word(flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long *)(info->start[0]); - -#ifdef CONFIG_FLASH_16BIT - vu_short high_data; - vu_short low_data; - vu_short *s_addr = (vu_short *)addr; -#endif - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) - return 2; - -#ifdef CONFIG_FLASH_16BIT - /* Write the 16 higher-bits */ - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - high_data = ((data>>16) & 0x0000ffff); - - s_addr[0x5555] = 0x00AA; - s_addr[0x2AAA] = 0x0055; - s_addr[0x5555] = 0x00A0; - - *((vu_short *)dest) = high_data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - while ((*((vu_short *)dest) & 0x0080) != (high_data & 0x0080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) - return 1; - } - - /* Write the 16 lower-bits */ -#endif - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); -#ifdef CONFIG_FLASH_16BIT - dest += 0x2; - low_data = (data & 0x0000ffff); - - s_addr[0x5555] = 0x00AA; - s_addr[0x2AAA] = 0x0055; - s_addr[0x5555] = 0x00A0; - *((vu_short *)dest) = low_data; - -#else - addr[0x5555] = 0x00AA00AA; - addr[0x2AAA] = 0x00550055; - addr[0x5555] = 0x00A000A0; - *((vu_long *)dest) = data; -#endif - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - -#ifdef CONFIG_FLASH_16BIT - while ((*((vu_short *)dest) & 0x0080) != (low_data & 0x0080)) { -#else - while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) { -#endif - - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) - return 1; - } - return 0; -} diff --git a/board/etx094/u-boot.lds b/board/etx094/u-boot.lds deleted file mode 100644 index 8465937d10..0000000000 --- a/board/etx094/u-boot.lds +++ /dev/null @@ -1,105 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - net/libnet.o (.text*) - arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*) - *(.text.vsprintf) - - . = env_offset; - common/env_embedded.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/evb64260/serial.c b/board/evb64260/serial.c index 9fd429864a..b9ca1d760c 100644 --- a/board/evb64260/serial.c +++ b/board/evb64260/serial.c @@ -139,20 +139,13 @@ static void evb64260_serial_setbrg(void) #endif /* CONFIG_MPSC */ -static void evb64260_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device evb64260_serial_drv = { .name = "evb64260_serial", .start = evb64260_serial_init, .stop = NULL, .setbrg = evb64260_serial_setbrg, .putc = evb64260_serial_putc, - .puts = evb64260_serial_puts, + .puts = default_serial_puts, .getc = evb64260_serial_getc, .tstc = evb64260_serial_tstc, }; diff --git a/board/evb64260/u-boot.lds b/board/evb64260/u-boot.lds index 2d031efc4e..eac9c070e3 100644 --- a/board/evb64260/u-boot.lds +++ b/board/evb64260/u-boot.lds @@ -70,9 +70,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/fads/u-boot.lds b/board/fads/u-boot.lds index 9ea0674b88..6022dbce72 100644 --- a/board/fads/u-boot.lds +++ b/board/fads/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/flagadm/u-boot.lds b/board/flagadm/u-boot.lds index fd4e8a50d5..c8d38942c9 100644 --- a/board/flagadm/u-boot.lds +++ b/board/flagadm/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/flagadm/u-boot.lds.debug b/board/flagadm/u-boot.lds.debug index c7711028ad..92796e6744 100644 --- a/board/flagadm/u-boot.lds.debug +++ b/board/flagadm/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 54cb098a91..36f7c4f30f 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -53,6 +53,7 @@ COBJS-$(CONFIG_P2020DS) += ics307_clk.o COBJS-$(CONFIG_P3041DS) += ics307_clk.o COBJS-$(CONFIG_P4080DS) += ics307_clk.o COBJS-$(CONFIG_P5020DS) += ics307_clk.o +COBJS-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o # deal with common files for P-series corenet based devices SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o diff --git a/board/freescale/common/ngpixis.c b/board/freescale/common/ngpixis.c index 276ae3c5cf..3c7502879b 100644 --- a/board/freescale/common/ngpixis.c +++ b/board/freescale/common/ngpixis.c @@ -237,13 +237,17 @@ int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } -U_BOOT_CMD( - pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd, - "Reset the board using the FPGA sequencer", +#ifdef CONFIG_SYS_LONGHELP +static char pixis_help_text[] = "- hard reset to default bank\n" "pixis_reset altbank - reset to alternate bank\n" #ifdef DEBUG "pixis_reset dump - display the PIXIS registers\n" #endif - "pixis_reset sysclk <SYSCLK_freq> - reset with SYSCLK frequency(KHz)\n" + "pixis_reset sysclk <SYSCLK_freq> - reset with SYSCLK frequency(KHz)\n"; +#endif + +U_BOOT_CMD( + pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd, + "Reset the board using the FPGA sequencer", pixis_help_text ); diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c index 6cd7e5108a..c92902a92e 100644 --- a/board/freescale/common/qixis.c +++ b/board/freescale/common/qixis.c @@ -32,22 +32,22 @@ void qixis_write(unsigned int reg, u8 value) void qixis_reset(void) { - QIXIS_WRITE(rst_ctl, 0x83); + QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET); } void qixis_bank_reset(void) { - QIXIS_WRITE(rcfg_ctl, 0x20); - QIXIS_WRITE(rcfg_ctl, 0x21); + QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_IDLE); + QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START); } -/* Set the boot bank to the power-on default bank0 */ +/* Set the boot bank to the power-on default bank */ void clear_altbank(void) { u8 reg; reg = QIXIS_READ(brdcfg[0]); - reg = reg & ~QIXIS_LBMAP_MASK; + reg = (reg & ~QIXIS_LBMAP_MASK) | QIXIS_LBMAP_DFLTBANK; QIXIS_WRITE(brdcfg[0], reg); } @@ -85,11 +85,11 @@ static void qixis_dump_regs(void) printf("ctl_sys = %02x\n", QIXIS_READ(ctl_sys)); printf("rcw_ctl = %02x\n", QIXIS_READ(rcw_ctl)); printf("present = %02x\n", QIXIS_READ(present)); + printf("present2 = %02x\n", QIXIS_READ(present2)); printf("clk_spd = %02x\n", QIXIS_READ(clk_spd)); printf("stat_dut = %02x\n", QIXIS_READ(stat_dut)); printf("stat_sys = %02x\n", QIXIS_READ(stat_sys)); printf("stat_alrm = %02x\n", QIXIS_READ(stat_alrm)); - printf("ctl_sys2 = %02x\n", QIXIS_READ(ctl_sys2)); } #endif @@ -115,7 +115,8 @@ int qixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) for (i = 0; i < ARRAY_SIZE(period); i++) { if (strcmp(argv[2], period[i]) == 0) { /* disable watchdog */ - QIXIS_WRITE(rcfg_ctl, rcfg & ~0x08); + QIXIS_WRITE(rcfg_ctl, + rcfg & ~QIXIS_RCFG_CTL_WATCHDOG_ENBLE); QIXIS_WRITE(watch, ((i<<2) - 1)); QIXIS_WRITE(rcfg_ctl, rcfg); return 0; diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h index 7a0268a02c..b98b180655 100644 --- a/board/freescale/common/qixis.h +++ b/board/freescale/common/qixis.h @@ -26,7 +26,7 @@ struct qixis { u8 stat_sys; u8 stat_alrm; u8 present; - u8 ctl_sys2; + u8 present2; /* Presence Status Register 2,0x0c */ u8 rcw_ctl; u8 ctl_led; u8 i2cblk; @@ -86,12 +86,6 @@ struct qixis { u8 res15[16]; }; -#define QIXIS_BASE 0xffdf0000 -#define QIXIS_LBMAP_SWITCH 7 -#define QIXIS_LBMAP_MASK 0x0f -#define QIXIS_LBMAP_SHIFT 0 -#define QIXIS_LBMAP_ALTBANK 0x04 - u8 qixis_read(unsigned int reg); void qixis_write(unsigned int reg, u8 value); diff --git a/board/freescale/common/vsc3316_3308.c b/board/freescale/common/vsc3316_3308.c new file mode 100644 index 0000000000..786856597f --- /dev/null +++ b/board/freescale/common/vsc3316_3308.c @@ -0,0 +1,184 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "vsc3316_3308.h" + +#define REVISION_ID_REG 0x7E +#define INTERFACE_MODE_REG 0x79 +#define CURRENT_PAGE_REGISTER 0x7F +#define CONNECTION_CONFIG_PAGE 0x00 +#define INPUT_STATE_REG 0x13 +#define GLOBAL_INPUT_ISE1 0x51 +#define GLOBAL_INPUT_ISE2 0x52 +#define GLOBAL_INPUT_LOS 0x55 +#define GLOBAL_CORE_CNTRL 0x5D +#define OUTPUT_MODE_PAGE 0x23 +#define CORE_CONTROL_PAGE 0x25 +#define CORE_CONFIG_REG 0x75 + +int vsc_if_enable(unsigned int vsc_addr) +{ + u8 data; + + debug("VSC:Configuring VSC at I2C address 0x%2x" + " for 2-wire interface\n", vsc_addr); + + /* enable 2-wire Serial InterFace (I2C) */ + data = 0x02; + return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1); +} + +int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2], + unsigned int num_con) +{ + unsigned int i; + u8 rev_id = 0; + int ret; + + debug("VSC:Initializing VSC3316 at I2C address 0x%2x" + " for Tx\n", vsc_addr); + + ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1); + if (ret < 0) { + printf("VSC:0x%x could not read REV_ID from device.\n", + vsc_addr); + return ret; + } + + if (rev_id != 0xab) { + printf("VSC: device at address 0x%x is not VSC3316/3308.\n", + vsc_addr); + return -ENODEV; + } + + ret = vsc_if_enable(vsc_addr); + if (ret) { + printf("VSC:0x%x could not configured for 2-wire I/F.\n", + vsc_addr); + return ret; + } + + /* config connections - page 0x00 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE); + + /* Making crosspoint connections, by connecting required + * input to output */ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]); + + /* input state - page 0x13 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG); + /* Configuring the required input of the switch */ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][0], 0x80); + + /* Setting Global Input LOS threshold value */ + i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60); + + /* config output mode - page 0x23 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE); + /* Turn ON the Output driver correspond to required output*/ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][1], 0); + + /* configure global core control register, Turn on Global core power */ + i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0); + + vsc_wp_config(vsc_addr); + + return 0; +} + +int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2], + unsigned int num_con) +{ + unsigned int i; + u8 rev_id = 0; + int ret; + + debug("VSC:Initializing VSC3308 at I2C address 0x%x" + " for Tx\n", vsc_addr); + + ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1); + if (ret < 0) { + printf("VSC:0x%x could not read REV_ID from device.\n", + vsc_addr); + return ret; + } + + if (rev_id != 0xab) { + printf("VSC: device at address 0x%x is not VSC3316/3308.\n", + vsc_addr); + return -ENODEV; + } + + ret = vsc_if_enable(vsc_addr); + if (ret) { + printf("VSC:0x%x could not configured for 2-wire I/F.\n", + vsc_addr); + return ret; + } + + /* config connections - page 0x00 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE); + + /* Making crosspoint connections, by connecting required + * input to output */ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]); + + /*Configure Global Input ISE and gain */ + i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0x12); + i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0x12); + + /* input state - page 0x13 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG); + /* Turning ON the required input of the switch */ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][0], 0); + + /* Setting Global Input LOS threshold value */ + i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60); + + /* config output mode - page 0x23 */ + i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE); + /* Turn ON the Output driver correspond to required output*/ + for (i = 0; i < num_con ; i++) + i2c_reg_write(vsc_addr, con_arr[i][1], 0); + + /* configure global core control register, Turn on Global core power */ + i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0); + + vsc_wp_config(vsc_addr); + + return 0; +} + +void vsc_wp_config(unsigned int vsc_addr) +{ + debug("VSC:Configuring VSC at address:0x%x for WP\n", vsc_addr); + + /* For new crosspoint configuration to occur, WP bit of + * CORE_CONFIG_REG should be set 1 and then reset to 0 */ + i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x01); + i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x0); +} diff --git a/board/freescale/common/vsc3316_3308.h b/board/freescale/common/vsc3316_3308.h new file mode 100644 index 0000000000..effd66dce4 --- /dev/null +++ b/board/freescale/common/vsc3316_3308.h @@ -0,0 +1,34 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __VSC_CROSSBAR_H_ +#define __VSC_CROSSBAR_H 1_ + +#include <common.h> +#include <i2c.h> +#include <errno.h> + +int vsc_if_enable(unsigned int vsc_addr); +int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2], + unsigned int num_con); +int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2], + unsigned int num_con); +void vsc_wp_config(unsigned int vsc_addr); + +#endif /* __VSC_CROSSBAR_H_ */ diff --git a/board/freescale/m5208evbe/u-boot.lds b/board/freescale/m5208evbe/u-boot.lds index 6e39be169a..2c151f20f5 100644 --- a/board/freescale/m5208evbe/u-boot.lds +++ b/board/freescale/m5208evbe/u-boot.lds @@ -69,9 +69,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.lds index 3e9f4c3460..dbd6f6ab20 100644 --- a/board/freescale/m52277evb/u-boot.lds +++ b/board/freescale/m52277evb/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m5235evb/u-boot.lds index d39e7348b3..00932ae68d 100644 --- a/board/freescale/m5235evb/u-boot.lds +++ b/board/freescale/m5235evb/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5249evb/u-boot.lds b/board/freescale/m5249evb/u-boot.lds index c4039edf43..d054f20bce 100644 --- a/board/freescale/m5249evb/u-boot.lds +++ b/board/freescale/m5249evb/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5253demo/u-boot.lds b/board/freescale/m5253demo/u-boot.lds index cbd28312a0..f8116f601e 100644 --- a/board/freescale/m5253demo/u-boot.lds +++ b/board/freescale/m5253demo/u-boot.lds @@ -69,9 +69,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5253evbe/u-boot.lds b/board/freescale/m5253evbe/u-boot.lds index c4039edf43..d054f20bce 100644 --- a/board/freescale/m5253evbe/u-boot.lds +++ b/board/freescale/m5253evbe/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5271evb/u-boot.lds b/board/freescale/m5271evb/u-boot.lds index 4717036d50..133ec01036 100644 --- a/board/freescale/m5271evb/u-boot.lds +++ b/board/freescale/m5271evb/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5272c3/u-boot.lds b/board/freescale/m5272c3/u-boot.lds index c4039edf43..d054f20bce 100644 --- a/board/freescale/m5272c3/u-boot.lds +++ b/board/freescale/m5272c3/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5275evb/u-boot.lds b/board/freescale/m5275evb/u-boot.lds index 6c2dfe8ec4..fc68de1ba1 100644 --- a/board/freescale/m5275evb/u-boot.lds +++ b/board/freescale/m5275evb/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5282evb/u-boot.lds b/board/freescale/m5282evb/u-boot.lds index 4ba1964f7e..ad49874c5a 100644 --- a/board/freescale/m5282evb/u-boot.lds +++ b/board/freescale/m5282evb/u-boot.lds @@ -29,6 +29,9 @@ SECTIONS { arch/m68k/cpu/mcf52x2/start.o (.text*) + . = DEFINED(env_offset) ? env_offset : .; + common/env_embedded.o (.text*) + *(.text*) } _etext = .; @@ -65,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m53017evb/u-boot.lds b/board/freescale/m53017evb/u-boot.lds index 80935f28bf..d25a36f651 100644 --- a/board/freescale/m53017evb/u-boot.lds +++ b/board/freescale/m53017evb/u-boot.lds @@ -71,9 +71,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5329evb/u-boot.lds b/board/freescale/m5329evb/u-boot.lds index 40af8bc23c..6616594e7b 100644 --- a/board/freescale/m5329evb/u-boot.lds +++ b/board/freescale/m5329evb/u-boot.lds @@ -69,9 +69,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m5373evb/u-boot.lds b/board/freescale/m5373evb/u-boot.lds index 19342ac214..bc40fd649d 100644 --- a/board/freescale/m5373evb/u-boot.lds +++ b/board/freescale/m5373evb/u-boot.lds @@ -69,9 +69,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/siemens/IAD210/Makefile b/board/freescale/m54418twr/Makefile index bb81507815..1e53f48f5d 100644 --- a/board/siemens/IAD210/Makefile +++ b/board/freescale/m54418twr/Makefile @@ -1,6 +1,5 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Copyright 2010-2012 Freescale Semiconductor, Inc. +# TsiChung Liew (Tsi-Chung.Liew@freescale.com) # # See file CREDITS for list of people who contributed to this # project. @@ -25,7 +24,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS = $(BOARD).o flash.o atm.o +COBJS = $(BOARD).o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/bmw/config.mk b/board/freescale/m54418twr/config.mk index a1a44e5811..a592335861 100644 --- a/board/bmw/config.mk +++ b/board/freescale/m54418twr/config.mk @@ -1,6 +1,5 @@ -# -# (C) Copyright 2001 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Copyright 2010-2012 Freescale Semiconductor, Inc. +# TsiChung Liew (Tsi-Chung.Liew@freescale.com) # # See file CREDITS for list of people who contributed to this # project. @@ -21,10 +20,6 @@ # MA 02111-1307 USA # -# -# BMW board -# +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp -# NOTE: The flags below affect how the BCM570x driver is compiled -PLATFORM_CPPFLAGS += -DEMBEDDED -DBIG_ENDIAN_HOST -DINCLUDE_5701_AX_FIX=1\ - -DDBG=0 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256 +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(CONFIG_SYS_TEXT_BASE) diff --git a/board/freescale/m54418twr/m54418twr.c b/board/freescale/m54418twr/m54418twr.c new file mode 100644 index 0000000000..6e57bef896 --- /dev/null +++ b/board/freescale/m54418twr/m54418twr.c @@ -0,0 +1,129 @@ +/* + * Copyright 2010-2012 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <spi.h> +#include <asm/io.h> +#include <asm/immap.h> +#include <mmc.h> +#include <fsl_esdhc.h> + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + /* + * need to to: + * Check serial flash size. if 2mb evb, else 8mb demo + */ + puts("Board: "); + puts("Freescale MCF54418 Tower System\n"); + return 0; +}; + +phys_size_t initdram(int board_type) +{ + u32 dramsize; + +#if defined(CONFIG_SERIAL_BOOT) + /* + * Serial Boot: The dram is already initialized in start.S + * only require to return DRAM size + */ + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; +#else + sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM); + ccm_t *ccm = (ccm_t *)MMAP_CCM; + gpio_t *gpio = (gpio_t *) MMAP_GPIO; + pm_t *pm = (pm_t *) MMAP_PM; + u32 i; + + dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; + + for (i = 0x13; i < 0x20; i++) { + if (dramsize == (1 << i)) + break; + } + + out_8(&pm->pmcr0, 0x2E); + out_8(&gpio->mscr_sdram, 1); + + clrbits_be16(&ccm->misccr2, CCM_MISCCR2_FBHALF); + setbits_be16(&ccm->misccr2, CCM_MISCCR2_DDR2CLK); + + out_be32(&sdram->rcrcr, 0x40000000); + out_be32(&sdram->padcr, 0x01030203); + + out_be32(&sdram->cr00, 0x01010101); + out_be32(&sdram->cr01, 0x00000101); + out_be32(&sdram->cr02, 0x01010100); + out_be32(&sdram->cr03, 0x01010000); + out_be32(&sdram->cr04, 0x00010101); + out_be32(&sdram->cr06, 0x00010100); + out_be32(&sdram->cr07, 0x00000001); + out_be32(&sdram->cr08, 0x01000001); + out_be32(&sdram->cr09, 0x00000100); + out_be32(&sdram->cr10, 0x00010001); + out_be32(&sdram->cr11, 0x00000200); + out_be32(&sdram->cr12, 0x01000002); + out_be32(&sdram->cr13, 0x00000000); + out_be32(&sdram->cr14, 0x00000100); + out_be32(&sdram->cr15, 0x02000100); + out_be32(&sdram->cr16, 0x02000407); + out_be32(&sdram->cr17, 0x02030007); + out_be32(&sdram->cr18, 0x02000100); + out_be32(&sdram->cr19, 0x0A030203); + out_be32(&sdram->cr20, 0x00020708); + out_be32(&sdram->cr21, 0x00050008); + out_be32(&sdram->cr22, 0x04030002); + out_be32(&sdram->cr23, 0x00000004); + out_be32(&sdram->cr24, 0x020A0000); + out_be32(&sdram->cr25, 0x0C00000E); + out_be32(&sdram->cr26, 0x00002004); + out_be32(&sdram->cr28, 0x00100010); + out_be32(&sdram->cr29, 0x00100010); + out_be32(&sdram->cr31, 0x07990000); + out_be32(&sdram->cr40, 0x00000000); + out_be32(&sdram->cr41, 0x00C80064); + out_be32(&sdram->cr42, 0x44520002); + out_be32(&sdram->cr43, 0x00C80023); + out_be32(&sdram->cr45, 0x0000C350); + out_be32(&sdram->cr56, 0x04000000); + out_be32(&sdram->cr57, 0x03000304); + out_be32(&sdram->cr58, 0x40040000); + out_be32(&sdram->cr59, 0xC0004004); + out_be32(&sdram->cr60, 0x0642C000); + out_be32(&sdram->cr61, 0x00000642); + asm("tpf"); + + out_be32(&sdram->cr09, 0x01000100); + + udelay(100); +#endif + return dramsize; +}; + +int testdram(void) +{ + return 0; +} diff --git a/board/c2mon/u-boot.lds b/board/freescale/m54418twr/u-boot.lds index b9b8e3c727..36a4c264b9 100644 --- a/board/c2mon/u-boot.lds +++ b/board/freescale/m54418twr/u-boot.lds @@ -1,5 +1,5 @@ /* - * (C) Copyright 2001-2010 + * (C) Copyright 2000 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -21,24 +21,14 @@ * MA 02111-1307 USA */ -OUTPUT_ARCH(powerpc) +OUTPUT_ARCH(m68k) SECTIONS { /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; .text : { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*) - net/libnet.o (.text*) - - . = env_offset; - common/env_embedded.o (.text*) + arch/m68k/cpu/mcf5445x/start.o (.text*) *(.text*) } @@ -53,16 +43,18 @@ SECTIONS . = (. + 0x00FF) & 0xFFFFFF00; _erotext = .; PROVIDE (erotext = .); + .reloc : { + __got_start = .; + KEEP(*(.got)) + __got_end = .; _GOT2_TABLE_ = .; KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); _FIXUP_TABLE_ = .; KEEP(*(.fixup)) } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; __fixup_entries = (. - _FIXUP_TABLE_)>>2; .data : @@ -74,10 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; @@ -92,12 +85,14 @@ SECTIONS __init_end = .; __bss_start = .; - .bss (NOLOAD) : + .bss (NOLOAD) : { + _sbss = .; *(.bss*) *(.sbss*) *(COMMON) . = ALIGN(4); + _ebss = .; } __bss_end__ = . ; PROVIDE (end = .); diff --git a/board/freescale/m54451evb/u-boot.lds b/board/freescale/m54451evb/u-boot.lds index 45924b7514..91328a4af6 100644 --- a/board/freescale/m54451evb/u-boot.lds +++ b/board/freescale/m54451evb/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m54455evb/u-boot.lds index f341449346..36a4c264b9 100644 --- a/board/freescale/m54455evb/u-boot.lds +++ b/board/freescale/m54455evb/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m547xevb/u-boot.lds b/board/freescale/m547xevb/u-boot.lds index 5472689b5b..de4d0eb907 100644 --- a/board/freescale/m547xevb/u-boot.lds +++ b/board/freescale/m547xevb/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/m548xevb/u-boot.lds b/board/freescale/m548xevb/u-boot.lds index cf3f38c0f3..fbbe0c5dc5 100644 --- a/board/freescale/m548xevb/u-boot.lds +++ b/board/freescale/m548xevb/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c index 730ec4e734..1071803c79 100644 --- a/board/freescale/mpc8313erdb/mpc8313erdb.c +++ b/board/freescale/mpc8313erdb/mpc8313erdb.c @@ -70,22 +70,22 @@ int checkboard(void) #ifndef CONFIG_NAND_SPL static struct pci_region pci_regions[] = { { - bus_start: CONFIG_SYS_PCI1_MEM_BASE, - phys_start: CONFIG_SYS_PCI1_MEM_PHYS, - size: CONFIG_SYS_PCI1_MEM_SIZE, - flags: PCI_REGION_MEM | PCI_REGION_PREFETCH + .bus_start = CONFIG_SYS_PCI1_MEM_BASE, + .phys_start = CONFIG_SYS_PCI1_MEM_PHYS, + .size = CONFIG_SYS_PCI1_MEM_SIZE, + .flags = PCI_REGION_MEM | PCI_REGION_PREFETCH }, { - bus_start: CONFIG_SYS_PCI1_MMIO_BASE, - phys_start: CONFIG_SYS_PCI1_MMIO_PHYS, - size: CONFIG_SYS_PCI1_MMIO_SIZE, - flags: PCI_REGION_MEM + .bus_start = CONFIG_SYS_PCI1_MMIO_BASE, + .phys_start = CONFIG_SYS_PCI1_MMIO_PHYS, + .size = CONFIG_SYS_PCI1_MMIO_SIZE, + .flags = PCI_REGION_MEM }, { - bus_start: CONFIG_SYS_PCI1_IO_BASE, - phys_start: CONFIG_SYS_PCI1_IO_PHYS, - size: CONFIG_SYS_PCI1_IO_SIZE, - flags: PCI_REGION_IO + .bus_start = CONFIG_SYS_PCI1_IO_BASE, + .phys_start = CONFIG_SYS_PCI1_IO_PHYS, + .size = CONFIG_SYS_PCI1_IO_SIZE, + .flags = PCI_REGION_IO } }; diff --git a/board/freescale/mpc8568mds/bcsr.c b/board/freescale/mpc8568mds/bcsr.c index 30676e1e1c..2a172ccdef 100644 --- a/board/freescale/mpc8568mds/bcsr.c +++ b/board/freescale/mpc8568mds/bcsr.c @@ -25,7 +25,7 @@ #include "bcsr.h" -void enable_8568mds_duart() +void enable_8568mds_duart(void) { volatile uint* duart_mux = (uint *)(CONFIG_SYS_CCSRBAR + 0xe0060); volatile uint* devices = (uint *)(CONFIG_SYS_CCSRBAR + 0xe0070); @@ -36,21 +36,21 @@ void enable_8568mds_duart() bcsr[5] |= 0x01; /* Enable Duart in BCSR*/ } -void enable_8568mds_flash_write() +void enable_8568mds_flash_write(void) { volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); bcsr[9] |= 0x01; } -void disable_8568mds_flash_write() +void disable_8568mds_flash_write(void) { volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); bcsr[9] &= ~(0x01); } -void enable_8568mds_qe_mdio() +void enable_8568mds_qe_mdio(void) { u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR); diff --git a/board/freescale/mpc8569mds/bcsr.c b/board/freescale/mpc8569mds/bcsr.c index b688e5cc73..37d0c5f9a9 100644 --- a/board/freescale/mpc8569mds/bcsr.c +++ b/board/freescale/mpc8569mds/bcsr.c @@ -25,17 +25,17 @@ #include "bcsr.h" -void enable_8569mds_flash_write() +void enable_8569mds_flash_write(void) { setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP); } -void disable_8569mds_flash_write() +void disable_8569mds_flash_write(void) { clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP); } -void enable_8569mds_qe_uec() +void enable_8569mds_qe_uec(void) { #if defined(CONFIG_SYS_UCC_RGMII_MODE) setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), @@ -60,7 +60,7 @@ void enable_8569mds_qe_uec() #endif } -void disable_8569mds_brd_eeprom_write_protect() +void disable_8569mds_brd_eeprom_write_protect(void) { clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), BCSR7_BRD_WRT_PROTECT); } diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds index 91ffdbefd1..52677299e8 100644 --- a/board/freescale/mx31ads/u-boot.lds +++ b/board/freescale/mx31ads/u-boot.lds @@ -57,9 +57,11 @@ SECTIONS } . = ALIGN(4); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = ALIGN(4); diff --git a/board/sbc8560/Makefile b/board/freescale/t4qds/Makefile index ce0156040a..ff09ffa51e 100644 --- a/board/sbc8560/Makefile +++ b/board/freescale/t4qds/Makefile @@ -1,9 +1,5 @@ # -# (C) Copyright 2004-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>. -# Added support for Wind River SBC8560 board +# Copyright 2012 Freescale Semiconductor, Inc. # # See file CREDITS for list of people who contributed to this # project. @@ -15,7 +11,7 @@ # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License @@ -29,9 +25,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-$(CONFIG_T4240QDS)+= eth.o +COBJS-$(CONFIG_PCI) += pci.o COBJS-y += law.o COBJS-y += tlb.o -COBJS-$(CONFIG_FSL_DDR1) += ddr.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) @@ -40,6 +38,12 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + ######################################################################### # defines $(obj).depend target diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c new file mode 100644 index 0000000000..692616aed4 --- /dev/null +++ b/board/freescale/t4qds/ddr.c @@ -0,0 +1,186 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * Version 2 or later as published by the Free Software Foundation. + */ + +#include <common.h> +#include <i2c.h> +#include <hwconfig.h> +#include <asm/mmu.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> +#include <asm/fsl_law.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; + u32 cpo; + u32 write_data_delay; + u32 force_2T; +}; + +/* + * This table contains all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay | + */ + {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {} +}; + +/* + * The three slots have slightly different timing. The center values are good + * for all slots. We use identical speed tables for them. In future use, if + * DIMMs require separated tables, make more entries as needed. + */ +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay | + */ + {4, 1350, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0}, + {4, 1666, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0}, + {4, 2140, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0}, + {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {} +}; + +/* + * The three slots have slightly different timing. See comments above. + */ +static const struct board_specific_parameters *rdimms[] = { + rdimm0, +}; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + ulong ddr_freq; + + if (ctrl_num > 2) { + printf("Not supported controller number %d\n", ctrl_num); + return; + } + if (!pdimm->n_ranks) + return; + + /* + * we use identical timing for all slots. If needed, change the code + * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num]; + */ + if (popts->registered_dimm_en) + pbsp = rdimms[0]; + else + pbsp = udimms[0]; + + + /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->cpo_override = pbsp->cpo; + popts->write_data_delay = + pbsp->write_data_delay; + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->twoT_en = pbsp->force_2T; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found " + "for data rate %lu MT/s\n" + "Trying to use the highest speed (%u) parameters\n", + ddr_freq, pbsp_highest->datarate_mhz_high); + popts->cpo_override = pbsp_highest->cpo; + popts->write_data_delay = pbsp_highest->write_data_delay; + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + popts->twoT_en = pbsp_highest->force_2T; + } else { + panic("DIMM is not supported by this board"); + } +found: + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + /* DHC_EN =1, ODT = 75 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +} + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size; + + puts("Initializing....using SPD\n"); + + dram_size = fsl_ddr_sdram(); + + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; + + puts(" DDR: "); + return dram_size; +} diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c new file mode 100644 index 0000000000..a49c7d4f15 --- /dev/null +++ b/board/freescale/t4qds/eth.c @@ -0,0 +1,495 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <netdev.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> +#include <malloc.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <miiphy.h> +#include <phy.h> +#include <asm/fsl_dtsec.h> +#include <asm/fsl_serdes.h> +#include "../common/qixis.h" +#include "../common/fman.h" + +#include "t4240qds_qixis.h" + +#define EMI_NONE 0xFFFFFFFF +#define EMI1_RGMII 0 +#define EMI1_SLOT1 1 +#define EMI1_SLOT2 2 +#define EMI1_SLOT3 3 +#define EMI1_SLOT4 4 +#define EMI1_SLOT5 5 +#define EMI1_SLOT7 7 +#define EMI2 8 /* tmp, FIXME */ +/* Slot6 and Slot8 do not have EMI connections */ + +static int mdio_mux[NUM_FM_PORTS]; + +static const char *mdio_names[] = { + "T4240QDS_MDIO0", + "T4240QDS_MDIO1", + "T4240QDS_MDIO2", + "T4240QDS_MDIO3", + "T4240QDS_MDIO4", + "T4240QDS_MDIO5", + "NULL", + "T4240QDS_MDIO7", + "T4240QDS_10GC", +}; + +static u8 lane_to_slot_fsm1[] = {1, 1, 1, 1, 2, 2, 2, 2}; +static u8 lane_to_slot_fsm2[] = {3, 3, 3, 3, 4, 4, 4, 4}; + +static const char *t4240qds_mdio_name_for_muxval(u8 muxval) +{ + return mdio_names[muxval]; +} + +struct mii_dev *mii_dev_for_muxval(u8 muxval) +{ + struct mii_dev *bus; + const char *name = t4240qds_mdio_name_for_muxval(muxval); + + if (!name) { + printf("No bus for muxval %x\n", muxval); + return NULL; + } + + bus = miiphy_get_dev_by_name(name); + + if (!bus) { + printf("No bus by name %s\n", name); + return NULL; + } + + return bus; +} + +struct t4240qds_mdio { + u8 muxval; + struct mii_dev *realbus; +}; + +static void t4240qds_mux_mdio(u8 muxval) +{ + u8 brdcfg4; + if ((muxval < 6) || (muxval == 7)) { + brdcfg4 = QIXIS_READ(brdcfg[4]); + brdcfg4 &= ~BRDCFG4_EMISEL_MASK; + brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT); + QIXIS_WRITE(brdcfg[4], brdcfg4); + } +} + +static int t4240qds_mdio_read(struct mii_dev *bus, int addr, int devad, + int regnum) +{ + struct t4240qds_mdio *priv = bus->priv; + + t4240qds_mux_mdio(priv->muxval); + + return priv->realbus->read(priv->realbus, addr, devad, regnum); +} + +static int t4240qds_mdio_write(struct mii_dev *bus, int addr, int devad, + int regnum, u16 value) +{ + struct t4240qds_mdio *priv = bus->priv; + + t4240qds_mux_mdio(priv->muxval); + + return priv->realbus->write(priv->realbus, addr, devad, regnum, value); +} + +static int t4240qds_mdio_reset(struct mii_dev *bus) +{ + struct t4240qds_mdio *priv = bus->priv; + + return priv->realbus->reset(priv->realbus); +} + +static int t4240qds_mdio_init(char *realbusname, u8 muxval) +{ + struct t4240qds_mdio *pmdio; + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate T4240QDS MDIO bus\n"); + return -1; + } + + pmdio = malloc(sizeof(*pmdio)); + if (!pmdio) { + printf("Failed to allocate T4240QDS private data\n"); + free(bus); + return -1; + } + + bus->read = t4240qds_mdio_read; + bus->write = t4240qds_mdio_write; + bus->reset = t4240qds_mdio_reset; + sprintf(bus->name, t4240qds_mdio_name_for_muxval(muxval)); + + pmdio->realbus = miiphy_get_dev_by_name(realbusname); + + if (!pmdio->realbus) { + printf("No bus with name %s\n", realbusname); + free(bus); + free(pmdio); + return -1; + } + + pmdio->muxval = muxval; + bus->priv = pmdio; + + return mdio_register(bus); +} + +void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa, + enum fm_port port, int offset) +{ + if (mdio_mux[port] == EMI1_RGMII) + fdt_set_phy_handle(blob, prop, pa, "phy_rgmii"); + + /* TODO: will do with dts */ +} + +void fdt_fixup_board_enet(void *fdt) +{ + /* TODO: will do with dts */ +} + +int board_eth_init(bd_t *bis) +{ +#if defined(CONFIG_FMAN_ENET) + int i; + struct memac_mdio_info dtsec_mdio_info; + struct memac_mdio_info tgec_mdio_info; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_prtcl_s1, srds_prtcl_s2; + + srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + + /* Initialize the mdio_mux array so we can recognize empty elements */ + for (i = 0; i < NUM_FM_PORTS; i++) + mdio_mux[i] = EMI_NONE; + + dtsec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM2_DTSEC_MDIO_ADDR; + + dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the 1G MDIO bus */ + fm_memac_mdio_init(bis, &dtsec_mdio_info); + + tgec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM2_TGEC_MDIO_ADDR; + tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; + + /* Register the 10G MDIO bus */ + fm_memac_mdio_init(bis, &tgec_mdio_info); + + /* Register the muxing front-ends to the MDIO buses */ + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5); + t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7); + t4240qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2); + + + switch (srds_prtcl_s1) { + case 1: + case 2: + case 4: + /* XAUI/HiGig in Slot1 and Slot2 */ + fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC2, FM1_10GEC2_PHY_ADDR); + break; + case 28: + case 36: + /* SGMII in Slot1 and Slot2 */ + fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { + fm_info_set_phy_address(FM1_DTSEC9, + SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC10, + SGMII_CARD_PORT3_PHY_ADDR); + } + break; + case 38: + fm_info_set_phy_address(FM1_DTSEC5, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, QSGMII_CARD_PHY_ADDR); + if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { + fm_info_set_phy_address(FM1_DTSEC9, + QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC10, + QSGMII_CARD_PHY_ADDR); + } + break; + case 40: + case 46: + case 48: + fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { + fm_info_set_phy_address(FM1_DTSEC10, + SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC9, + SGMII_CARD_PORT4_PHY_ADDR); + } + fm_info_set_phy_address(FM1_DTSEC1, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC2, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC3, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC4, QSGMII_CARD_PHY_ADDR); + break; + default: + puts("Invalid SerDes1 protocol for T4240QDS\n"); + break; + } + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + int idx = i - FM1_DTSEC1, lane, slot; + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC1 + idx); + if (lane < 0) + break; + slot = lane_to_slot_fsm1[lane]; + debug("FM1@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); + switch (slot) { + case 1: + mdio_mux[i] = EMI1_SLOT1; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + case 2: + mdio_mux[i] = EMI1_SLOT2; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + }; + break; + case PHY_INTERFACE_MODE_RGMII: + /* FM1 DTSEC5 routes to RGMII with EC2 */ + debug("FM1@DTSEC%u is RGMII at address %u\n", + idx + 1, 2); + if (i == FM1_DTSEC5) + fm_info_set_phy_address(i, 2); + mdio_mux[i] = EMI1_RGMII; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } + + for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + mdio_mux[i] = EMI2; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } + + +#if (CONFIG_SYS_NUM_FMAN == 2) + switch (srds_prtcl_s2) { + case 1: + case 2: + case 4: + /* XAUI/HiGig in Slot3 and Slot4 */ + fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM2_10GEC2, FM2_10GEC2_PHY_ADDR); + break; + case 7: + case 13: + case 14: + case 16: + case 22: + case 23: + case 25: + case 26: + /* XAUI/HiGig in Slot3, SGMII in Slot4 */ + fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + break; + case 28: + case 36: + /* SGMII in Slot3 and Slot4 */ + fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR); + break; + case 38: + /* QSGMII in Slot3 and Slot4 */ + fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC5, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC6, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC9, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC10, QSGMII_CARD_PHY_ADDR); + break; + case 40: + case 46: + case 48: + /* SGMII in Slot3 */ + fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR); + /* QSGMII in Slot4 */ + fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); + break; + case 50: + case 52: + case 54: + fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); + break; + case 56: + case 57: + /* XFI in Slot3, SGMII in Slot4 */ + fm_info_set_phy_address(FM1_10GEC1, XFI_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC2, XFI_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_10GEC2, XFI_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_10GEC1, XFI_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + break; + default: + puts("Invalid SerDes2 protocol for T4240QDS\n"); + break; + } + + for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { + int idx = i - FM2_DTSEC1, lane, slot; + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + lane = serdes_get_first_lane(FSL_SRDS_2, + SGMII_FM2_DTSEC1 + idx); + if (lane < 0) + break; + slot = lane_to_slot_fsm2[lane]; + debug("FM2@DTSEC%u expects SGMII in slot %u\n", + idx + 1, slot); + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); + switch (slot) { + case 3: + mdio_mux[i] = EMI1_SLOT3; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + case 4: + mdio_mux[i] = EMI1_SLOT4; + fm_info_set_mdio(i, + mii_dev_for_muxval(mdio_mux[i])); + break; + }; + break; + case PHY_INTERFACE_MODE_RGMII: + /* + * If DTSEC5 is RGMII, then it's routed via via EC1 to + * the first on-board RGMII port. If DTSEC6 is RGMII, + * then it's routed via via EC2 to the second on-board + * RGMII port. + */ + debug("FM2@DTSEC%u is RGMII at address %u\n", + idx + 1, i == FM2_DTSEC5 ? 1 : 2); + fm_info_set_phy_address(i, i == FM2_DTSEC5 ? 1 : 2); + mdio_mux[i] = EMI1_RGMII; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } + + for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) { + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + mdio_mux[i] = EMI2; + fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); + break; + default: + break; + } + } +#endif /* CONFIG_SYS_NUM_FMAN */ + + cpu_eth_init(bis); +#endif /* CONFIG_FMAN_ENET */ + + return pci_eth_init(bis); +} diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c new file mode 100644 index 0000000000..5debcf612a --- /dev/null +++ b/board/freescale/t4qds/law.c @@ -0,0 +1,47 @@ +/* + * Copyright 2008-2012 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), +#endif + SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC), +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR), +#endif +#ifdef CONFIG_SYS_NAND_BASE_PHYS + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/arch/arm/cpu/lh7a40x/cpu.c b/board/freescale/t4qds/pci.c index b193189123..fc00b4ad6d 100644 --- a/arch/arm/cpu/lh7a40x/cpu.c +++ b/board/freescale/t4qds/pci.c @@ -1,10 +1,5 @@ /* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * Copyright 2007-2012 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -25,41 +20,20 @@ * MA 02111-1307 USA */ -/* - * CPU specific code - */ - #include <common.h> #include <command.h> -#include <asm/system.h> - -static void cache_flush(void); +#include <pci.h> +#include <asm/fsl_pci.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/fsl_serdes.h> -int cleanup_before_linux (void) +void pci_init_board(void) { - /* - * this function is called just before we call linux - * it prepares the processor for linux - * - * we turn off caches etc ... - */ - - disable_interrupts (); - - /* turn off I/D-cache */ - icache_disable(); - dcache_disable(); - - /* flush I/D-cache */ - cache_flush(); - - return 0; + fsl_pcie_init_board(0); } -/* flush I/D-cache */ -static void cache_flush (void) +void pci_of_setup(void *blob, bd_t *bd) { - unsigned long i = 0; - - asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i)); + FT_FSL_PCI_SETUP; } diff --git a/board/freescale/t4qds/t4240qds_qixis.h b/board/freescale/t4qds/t4240qds_qixis.h new file mode 100644 index 0000000000..efb718d2c3 --- /dev/null +++ b/board/freescale/t4qds/t4240qds_qixis.h @@ -0,0 +1,56 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __T4020QDS_QIXIS_H__ +#define __T4020QDS_QIXIS_H__ + +/* Definitions of QIXIS Registers for T4020QDS */ + +/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */ +#define BRDCFG4_EMISEL_MASK 0xE0 +#define BRDCFG4_EMISEL_SHIFT 5 + +/* SYSCLK */ +#define QIXIS_SYSCLK_66 0x0 +#define QIXIS_SYSCLK_83 0x1 +#define QIXIS_SYSCLK_100 0x2 +#define QIXIS_SYSCLK_125 0x3 +#define QIXIS_SYSCLK_133 0x4 +#define QIXIS_SYSCLK_150 0x5 +#define QIXIS_SYSCLK_160 0x6 +#define QIXIS_SYSCLK_166 0x7 + +/* DDRCLK */ +#define QIXIS_DDRCLK_66 0x0 +#define QIXIS_DDRCLK_100 0x1 +#define QIXIS_DDRCLK_125 0x2 +#define QIXIS_DDRCLK_133 0x3 + +#define BRDCFG5_RESET 0x00 + +#define BRDCFG12_SD3EN_MASK 0x20 +#define BRDCFG12_SD3MX_MASK 0x08 +#define BRDCFG12_SD3MX_SLOT5 0x08 +#define BRDCFG12_SD3MX_SLOT6 0x00 +#define BRDCFG12_SD4EN_MASK 0x04 +#define BRDCFG12_SD4MX_MASK 0x03 +#define BRDCFG12_SD4MX_SLOT7 0x02 +#define BRDCFG12_SD4MX_SLOT8 0x01 +#define BRDCFG12_SD4MX_AURO_SATA 0x00 +#endif diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4qds.c new file mode 100644 index 0000000000..88b8cedf48 --- /dev/null +++ b/board/freescale/t4qds/t4qds.c @@ -0,0 +1,395 @@ +/* + * Copyright 2009-2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <netdev.h> +#include <linux/compiler.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> +#include <fm_eth.h> + +#include "../common/qixis.h" +#include "../common/vsc3316_3308.h" +#include "t4qds.h" +#include "t4240qds_qixis.h" + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + u8 sw; + struct cpu_type *cpu = gd->cpu; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + unsigned int i; + + printf("Board: %sQDS, ", cpu->name); + printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", + QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver)); + + sw = QIXIS_READ(brdcfg[0]); + sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; + + if (sw < 0x8) + printf("vBank: %d\n", sw); + else if (sw == 0x8) + puts("Promjet\n"); + else if (sw == 0x9) + puts("NAND\n"); + else + printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH); + + /* Display the RCW, so that no one gets confused as to what RCW + * we're actually using for this boot. + */ + puts("Reset Configuration Word (RCW):"); + for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { + u32 rcw = in_be32(&gur->rcwsr[i]); + + if ((i % 4) == 0) + printf("\n %08x:", i * 4); + printf(" %08x", rcw); + } + puts("\n"); + + /* + * Display the actual SERDES reference clocks as configured by the + * dip switches on the board. Note that the SWx registers could + * technically be set to force the reference clocks to match the + * values that the SERDES expects (or vice versa). For now, however, + * we just display both values and hope the user notices when they + * don't match. + */ + puts("SERDES Reference Clocks: "); + sw = QIXIS_READ(brdcfg[2]); + for (i = 0; i < MAX_SERDES; i++) { + static const char *freq[] = { + "100", "125", "156.25", "161.1328125"}; + unsigned int clock = (sw >> (2 * i)) & 3; + + printf("SERDES%u=%sMHz ", i+1, freq[clock]); + } + puts("\n"); + + return 0; +} + +int select_i2c_ch_pca9547(u8 ch) +{ + int ret; + + ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1); + if (ret) { + puts("PCA: failed to select proper channel\n"); + return ret; + } + + return 0; +} + +/* Configure Crossbar switches for Front-Side SerDes Ports */ +int config_frontside_crossbar_vsc3316(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_prtcl_s1, srds_prtcl_s2; + int ret; + + ret = select_i2c_ch_pca9547(I2C_MUX_CH_VSC3316_FS); + if (ret) + return ret; + + srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + if (srds_prtcl_s1) { + ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm1_tx, 8); + if (ret) + return ret; + ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm1_rx, 8); + if (ret) + return ret; + } + + srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + if (srds_prtcl_s2) { + ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm2_tx, 8); + if (ret) + return ret; + ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm2_rx, 8); + if (ret) + return ret; + } + + return 0; +} + +int config_backside_crossbar_mux(void) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_prtcl_s3, srds_prtcl_s4; + u8 brdcfg; + + srds_prtcl_s3 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS3_PRTCL; + srds_prtcl_s3 >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT; + switch (srds_prtcl_s3) { + case 0: + /* SerDes3 is not enabled */ + break; + case 2: + case 9: + case 10: + /* SD3(0:7) => SLOT5(0:7) */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD3MX_MASK; + brdcfg |= BRDCFG12_SD3MX_SLOT5; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + case 4: + case 6: + case 8: + case 12: + case 14: + case 16: + case 17: + case 19: + case 20: + /* SD3(4:7) => SLOT6(0:3) */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD3MX_MASK; + brdcfg |= BRDCFG12_SD3MX_SLOT6; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + default: + printf("WARNING: unsupported for SerDes3 Protocol %d\n", + srds_prtcl_s3); + return -1; + } + + srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS4_PRTCL; + srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT; + switch (srds_prtcl_s4) { + case 0: + /* SerDes4 is not enabled */ + break; + case 2: + /* 10b, SD4(0:7) => SLOT7(0:7) */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD4MX_MASK; + brdcfg |= BRDCFG12_SD4MX_SLOT7; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + case 4: + case 6: + case 8: + /* x1b, SD4(4:7) => SLOT8(0:3) */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD4MX_MASK; + brdcfg |= BRDCFG12_SD4MX_SLOT8; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + case 10: + case 12: + case 14: + case 16: + case 18: + /* 00b, SD4(4:5) => AURORA, SD4(6:7) => SATA */ + brdcfg = QIXIS_READ(brdcfg[12]); + brdcfg &= ~BRDCFG12_SD4MX_MASK; + brdcfg |= BRDCFG12_SD4MX_AURO_SATA; + QIXIS_WRITE(brdcfg[12], brdcfg); + break; + default: + printf("WARNING: unsupported for SerDes4 Protocol %d\n", + srds_prtcl_s4); + return -1; + } + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); + + set_liodns(); +#ifdef CONFIG_SYS_DPAA_QBMAN + setup_portals(); +#endif + + /* Disable remote I2C connectoin */ + QIXIS_WRITE(brdcfg[5], BRDCFG5_RESET); + + /* Configure board SERDES ports crossbar */ + config_frontside_crossbar_vsc3316(); + config_backside_crossbar_mux(); + select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); + + return 0; +} + +unsigned long get_board_sys_clk(void) +{ + u8 sysclk_conf = QIXIS_READ(brdcfg[1]); + + switch (sysclk_conf & 0x0F) { + case QIXIS_SYSCLK_83: + return 83333333; + case QIXIS_SYSCLK_100: + return 100000000; + case QIXIS_SYSCLK_125: + return 125000000; + case QIXIS_SYSCLK_133: + return 133333333; + case QIXIS_SYSCLK_150: + return 150000000; + case QIXIS_SYSCLK_160: + return 160000000; + case QIXIS_SYSCLK_166: + return 166666666; + } + return 66666666; +} + +unsigned long get_board_ddr_clk(void) +{ + u8 ddrclk_conf = QIXIS_READ(brdcfg[1]); + + switch ((ddrclk_conf & 0x30) >> 4) { + case QIXIS_DDRCLK_100: + return 100000000; + case QIXIS_DDRCLK_125: + return 125000000; + case QIXIS_DDRCLK_133: + return 133333333; + } + return 66666666; +} + +static const char *serdes_clock_to_string(u32 clock) +{ + switch (clock) { + case SRDS_PLLCR0_RFCK_SEL_100: + return "100"; + case SRDS_PLLCR0_RFCK_SEL_125: + return "125"; + case SRDS_PLLCR0_RFCK_SEL_156_25: + return "156.25"; + case SRDS_PLLCR0_RFCK_SEL_161_13: + return "161.1328125"; + default: + return "???"; + } +} + +int misc_init_r(void) +{ + u8 sw; + serdes_corenet_t *srds_regs = + (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + u32 actual[MAX_SERDES]; + unsigned int i; + + sw = QIXIS_READ(brdcfg[2]); + for (i = 0; i < MAX_SERDES; i++) { + unsigned int clock = (sw >> (2 * i)) & 3; + switch (clock) { + case 0: + actual[i] = SRDS_PLLCR0_RFCK_SEL_100; + break; + case 1: + actual[i] = SRDS_PLLCR0_RFCK_SEL_125; + break; + case 2: + actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25; + break; + case 3: + actual[i] = SRDS_PLLCR0_RFCK_SEL_161_13; + break; + } + } + + for (i = 0; i < MAX_SERDES; i++) { + u32 pllcr0 = srds_regs->bank[i].pllcr0; + u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; + if (expected != actual[i]) { + printf("Warning: SERDES%u expects reference clock" + " %sMHz, but actual is %sMHz\n", i + 1, + serdes_clock_to_string(expected), + serdes_clock_to_string(actual[i])); + } + } + + return 0; +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_PCI + pci_of_setup(blob, bd); +#endif + + fdt_fixup_liodn(blob); + fdt_fixup_dr_usb(blob, bd); + +#ifdef CONFIG_SYS_DPAA_FMAN + fdt_fixup_fman_ethernet(blob); + fdt_fixup_board_enet(blob); +#endif +} diff --git a/board/freescale/t4qds/t4qds.h b/board/freescale/t4qds/t4qds.h new file mode 100644 index 0000000000..c6a3492cb6 --- /dev/null +++ b/board/freescale/t4qds/t4qds.h @@ -0,0 +1,37 @@ +/* + * Copyright 2011-2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CORENET_DS_H__ +#define __CORENET_DS_H__ + +void fdt_fixup_board_enet(void *blob); +void pci_of_setup(void *blob, bd_t *bd); + +static const int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7}, + {8, 8}, {9, 9}, {14, 14}, {15, 15} }; + +static const int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5}, + {10, 10}, {11, 11}, {12, 12}, {13, 13} }; + +static const int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4}, + {10, 11}, {11, 10}, {12, 2}, {13, 3} }; + +static const int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6}, + {8, 9}, {9, 8}, {14, 1}, {15, 0} }; +#endif diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c new file mode 100644 index 0000000000..078a6e415c --- /dev/null +++ b/board/freescale/t4qds/tlb.c @@ -0,0 +1,136 @@ +/* + * Copyright 2008-2012 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) + /* + * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the + * SRAM is at 0xfff00000, it covered the 0xfffff000. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), +#else + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 1), +#endif + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_16M, 1), + + /* *I*G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_256K, 1), + + /* Bman/Qman */ +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 11, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 12, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 13, BOOKE_PAGESZ_4M, 1), +#endif +#ifdef CONFIG_SYS_NAND_BASE + /* + * *I*G - NAND + * entry 14 and 15 has been used hard coded, they will be disabled + * in cpu_init_f, so we use entry 16 for nand. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 16, BOOKE_PAGESZ_1M, 1), +#endif + SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 17, BOOKE_PAGESZ_4K, 1), + +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/gaisler/gr_cpci_ax2000/u-boot.lds b/board/gaisler/gr_cpci_ax2000/u-boot.lds index 87cb8e32ba..774c494f03 100644 --- a/board/gaisler/gr_cpci_ax2000/u-boot.lds +++ b/board/gaisler/gr_cpci_ax2000/u-boot.lds @@ -85,10 +85,11 @@ SECTIONS /* CMD Table */ - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } .data : { diff --git a/board/gaisler/gr_ep2s60/u-boot.lds b/board/gaisler/gr_ep2s60/u-boot.lds index 2fb44aa832..f6d13014f3 100644 --- a/board/gaisler/gr_ep2s60/u-boot.lds +++ b/board/gaisler/gr_ep2s60/u-boot.lds @@ -85,10 +85,11 @@ SECTIONS /* CMD Table */ - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } .data : { diff --git a/board/gaisler/gr_xc3s_1500/u-boot.lds b/board/gaisler/gr_xc3s_1500/u-boot.lds index 8719e97ee4..7df6e83392 100644 --- a/board/gaisler/gr_xc3s_1500/u-boot.lds +++ b/board/gaisler/gr_xc3s_1500/u-boot.lds @@ -85,10 +85,11 @@ SECTIONS /* CMD Table */ - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } .data : { diff --git a/board/gaisler/grsim/u-boot.lds b/board/gaisler/grsim/u-boot.lds index 33890b504d..b241cbc1d0 100644 --- a/board/gaisler/grsim/u-boot.lds +++ b/board/gaisler/grsim/u-boot.lds @@ -84,10 +84,11 @@ SECTIONS /* CMD Table */ - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } .data : { diff --git a/board/gaisler/grsim_leon2/u-boot.lds b/board/gaisler/grsim_leon2/u-boot.lds index cf6e5020ba..63c15b9117 100644 --- a/board/gaisler/grsim_leon2/u-boot.lds +++ b/board/gaisler/grsim_leon2/u-boot.lds @@ -84,10 +84,11 @@ SECTIONS /* CMD Table */ - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } + . = ALIGN(4); - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } .data : { diff --git a/board/gen860t/u-boot-flashenv.lds b/board/gen860t/u-boot-flashenv.lds index 5bb6c62d71..1cbe7e32ba 100644 --- a/board/gen860t/u-boot-flashenv.lds +++ b/board/gen860t/u-boot-flashenv.lds @@ -71,9 +71,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/gen860t/u-boot.lds b/board/gen860t/u-boot.lds index be99b51208..dd89c70f56 100644 --- a/board/gen860t/u-boot.lds +++ b/board/gen860t/u-boot.lds @@ -71,9 +71,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/genietv/u-boot.lds b/board/genietv/u-boot.lds index 1d66a9b2bd..124b183516 100644 --- a/board/genietv/u-boot.lds +++ b/board/genietv/u-boot.lds @@ -80,9 +80,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/genietv/u-boot.lds.debug b/board/genietv/u-boot.lds.debug index cfa4ef3f87..e1cf249650 100644 --- a/board/genietv/u-boot.lds.debug +++ b/board/genietv/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/lantec/Makefile b/board/h2200/Makefile index 12e4aa6880..51b1a9ea8d 100644 --- a/board/lantec/Makefile +++ b/board/h2200/Makefile @@ -1,9 +1,7 @@ # -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# h2200 Support # -# See file CREDITS for list of people who contributed to this -# project. +# Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com> # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as @@ -25,11 +23,18 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS = $(BOARD).o flash.o +COBJS := h2200.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +SRCS := $(COBJS:.o=.c) h2200-header.S OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) + +all: $(LIB) $(obj)h2200-header.bin + +$(obj)h2200-header.o: h2200-header.S + $(CC) $(CFLAGS) -c -o $@ $< + +$(obj)h2200-header.bin: $(obj)h2200-header.o + $(OBJCOPY) -O binary $< $@ $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) diff --git a/board/h2200/h2200-header.S b/board/h2200/h2200-header.S new file mode 100644 index 0000000000..c335bfefcd --- /dev/null +++ b/board/h2200/h2200-header.S @@ -0,0 +1,27 @@ +/* + * iPAQ h2200 header + * + * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + .word 0xea0003fe /* b 0x1000 */ + + .org 0x40 + .ascii "ECEC" + + .org 0x1000 - 1 + .byte 0x0 diff --git a/board/h2200/h2200.c b/board/h2200/h2200.c new file mode 100644 index 0000000000..30763061c7 --- /dev/null +++ b/board/h2200/h2200.c @@ -0,0 +1,53 @@ +/* + * iPAQ h2200 board configuration + * + * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/pxa.h> +#include <asm/arch/pxa-regs.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + /* We have RAM, disable cache */ + dcache_disable(); + icache_disable(); + + gd->bd->bi_arch_number = MACH_TYPE_H2200; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0xa0000100; + + return 0; +} + +int dram_init(void) +{ + /* + * Everything except MSC0 was already set up by + * 1st stage bootloader. + * + * This setting enables access to companion chip. + */ + clrsetbits_le32(MSC0, 0xffffffff, CONFIG_SYS_MSC0_VAL); + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + return 0; +} diff --git a/board/hermes/u-boot.lds b/board/hermes/u-boot.lds index ca9711575d..f02eb1c2aa 100644 --- a/board/hermes/u-boot.lds +++ b/board/hermes/u-boot.lds @@ -72,9 +72,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/hermes/u-boot.lds.debug b/board/hermes/u-boot.lds.debug index 8a197deef7..e84cc7991e 100644 --- a/board/hermes/u-boot.lds.debug +++ b/board/hermes/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c index 7c9d34ab84..9fe6408ecf 100644 --- a/board/htkw/mcx/mcx.c +++ b/board/htkw/mcx/mcx.c @@ -27,6 +27,8 @@ #include <asm/mach-types.h> #include <asm/gpio.h> #include <asm/omap_gpio.h> +#include <asm/arch/dss.h> +#include <asm/arch/clocks.h> #include "errno.h" #include <i2c.h> #ifdef CONFIG_USB_EHCI @@ -37,12 +39,16 @@ DECLARE_GLOBAL_DATA_PTR; -#define HOT_WATER_BUTTON 38 +#define HOT_WATER_BUTTON 42 +#define LCD_OUTPUT 55 + +/* Address of the framebuffer in RAM. */ +#define FB_START_ADDRESS 0x88000000 #ifdef CONFIG_USB_EHCI static struct omap_usbhs_board_data usbhs_bdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, }; @@ -67,6 +73,8 @@ int board_init(void) /* boot param addr */ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + gpio_direction_output(LCD_OUTPUT, 0); + return 0; } @@ -87,6 +95,7 @@ int board_late_init(void) return 0; setenv("bootcmd", "run swupdate"); + return 0; } #endif @@ -109,15 +118,34 @@ int board_mmc_init(bd_t *bis) } #endif -#ifdef CONFIG_USB_EHCI_OMAP -#define USB_HOST_PWR_EN 132 -int board_usb_init(void) +#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD) + +static struct panel_config lcd_cfg = { + .timing_h = PANEL_TIMING_H(40, 40, 48), + .timing_v = PANEL_TIMING_V(29, 13, 3), + .pol_freq = 0x00003000, /* Pol Freq */ + .divisor = 0x0001000E, + .panel_type = 0x01, /* TFT */ + .data_lines = 0x03, /* 24 Bit RGB */ + .load_mode = 0x02, /* Frame Mode */ + .panel_color = 0, + .lcd_size = PANEL_LCD_SIZE(800, 480), +}; + +int board_video_init(void) { - if (gpio_request(USB_HOST_PWR_EN, "USB_HOST_PWR_EN") < 0) { - puts("Failed to get USB_HOST_PWR_EN pin\n"); - return -ENODEV; - } - gpio_direction_output(USB_HOST_PWR_EN, 1); + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + void *fb; + + fb = (void *)FB_START_ADDRESS; + + lcd_cfg.frame_buffer = fb; + + setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON); + setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON); + + omap3_dss_panel_config(&lcd_cfg); + omap3_dss_enable(); return 0; } diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h index 867cc9e88d..0d4c642203 100644 --- a/board/htkw/mcx/mcx.h +++ b/board/htkw/mcx/mcx.h @@ -96,7 +96,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(GPMC_A7), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(GPMC_A8), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(GPMC_A9), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(GPMC_A10), (IDIS | PTU | DIS | M4)) \ + MUX_VAL(CP(GPMC_A10), (IEN | PTU | EN | M4)) \ /* GPIO_43 LCD buffer enable */ \ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) \ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) \ @@ -143,28 +143,28 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA0), (IEN | PTU | EN | M4))\ - MUX_VAL(CP(DSS_DATA1), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(DSS_DATA2), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA8), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(DSS_DATA9), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0))\ - MUX_VAL(CP(DSS_DATA16), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(DSS_DATA17), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(DSS_DATA18), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \ /* CAMERA */\ @@ -264,6 +264,8 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) \ MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) \ MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(HDQ_SIO), (IEN | PTU | EN | M4)) \ + /* GPIO_170 Touchscreen ISR */\ /* McSPI */\ MUX_VAL(CP(MCSPI1_CLK), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTD | DIS | M0)) \ @@ -313,11 +315,11 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(RMII_TXEN), (PTD | M0)) \ MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTD | EN | M0)) \ /* HECC */\ - MUX_VAL(CP(HECC1_TXD), (IEN | PTD | EN | M4)) \ - MUX_VAL(CP(HECC1_RXD), (IEN | PTD | EN | M4)) \ + MUX_VAL(CP(HECC1_TXD), (IEN | PTD | EN | M0)) \ + MUX_VAL(CP(HECC1_RXD), (IEN | PTD | EN | M0)) \ /* HSUSB */\ MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) \ + MUX_VAL(CP(HSUSB0_STP), (IEN | PTU | DIS | M0)) \ MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) \ diff --git a/board/hymod/u-boot.lds b/board/hymod/u-boot.lds index 1309f209de..7afae0a625 100644 --- a/board/hymod/u-boot.lds +++ b/board/hymod/u-boot.lds @@ -110,9 +110,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/hymod/u-boot.lds.debug b/board/hymod/u-boot.lds.debug index 99c48f28d4..dc8c4e958f 100644 --- a/board/hymod/u-boot.lds.debug +++ b/board/hymod/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/icu862/u-boot.lds b/board/icu862/u-boot.lds index 93c79a64b4..6778eb13ad 100644 --- a/board/icu862/u-boot.lds +++ b/board/icu862/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/icu862/u-boot.lds.debug b/board/icu862/u-boot.lds.debug index 91d3e67e82..3e075a85bd 100644 --- a/board/icu862/u-boot.lds.debug +++ b/board/icu862/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/idmr/u-boot.lds b/board/idmr/u-boot.lds index f697ccd515..0d6a0f3a3b 100644 --- a/board/idmr/u-boot.lds +++ b/board/idmr/u-boot.lds @@ -65,9 +65,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/incaip/u-boot.lds b/board/incaip/u-boot.lds index 4a59cea80f..8a871cff49 100644 --- a/board/incaip/u-boot.lds +++ b/board/incaip/u-boot.lds @@ -54,10 +54,9 @@ SECTIONS .sdata : { *(.sdata*) } - .u_boot_cmd : { - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> } uboot_end_data = .; diff --git a/board/ip860/u-boot.lds b/board/ip860/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/ip860/u-boot.lds +++ b/board/ip860/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/ip860/u-boot.lds.debug b/board/ip860/u-boot.lds.debug index 2f61b11d81..e47aff0fa7 100644 --- a/board/ip860/u-boot.lds.debug +++ b/board/ip860/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/ivm/ivm.c b/board/ivm/ivm.c index 71d64d434f..ab294794bd 100644 --- a/board/ivm/ivm.c +++ b/board/ivm/ivm.c @@ -333,13 +333,59 @@ void show_boot_progress (int status) void ide_set_reset (int on) { volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + int i; /* * Configure PC for IDE Reset Pin */ if (on) { /* assert RESET */ immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_IDE_RESET); + +#ifdef CONFIG_SYS_PB_12V_ENABLE + /* 12V Enable output OFF */ + immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_12V_ENABLE); + + immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_12V_ENABLE); + immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_12V_ENABLE); + immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_12V_ENABLE; + + /* wait 500 ms for the voltage to stabilize */ + for (i = 0; i < 500; ++i) + udelay(1000); +#endif /* CONFIG_SYS_PB_12V_ENABLE */ } else { /* release RESET */ +#ifdef CONFIG_SYS_PB_12V_ENABLE + /* 12V Enable output ON */ + immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_12V_ENABLE; +#endif /* CONFIG_SYS_PB_12V_ENABLE */ + +#ifdef CONFIG_SYS_PB_IDE_MOTOR + /* configure IDE Motor voltage monitor pin as input */ + immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_IDE_MOTOR); + immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_IDE_MOTOR); + immr->im_cpm.cp_pbdir &= ~(CONFIG_SYS_PB_IDE_MOTOR); + +/* wait up to 1 s for the motor voltage to stabilize */ + for (i = 0; i < 1000; ++i) { + if ((immr->im_cpm.cp_pbdat + & CONFIG_SYS_PB_IDE_MOTOR) != 0) + break; + udelay(1000); + } + + if (i == 1000) { /* Timeout */ + printf("\nWarning: 5V for IDE Motor missing\n"); +#ifdef CONFIG_STATUS_LED +#ifdef STATUS_LED_YELLOW + status_led_set(STATUS_LED_YELLOW, STATUS_LED_ON); +#endif +#ifdef STATUS_LED_GREEN + status_led_set(STATUS_LED_GREEN, STATUS_LED_OFF); +#endif +#endif /* CONFIG_STATUS_LED */ + } +#endif /* CONFIG_SYS_PB_IDE_MOTOR */ + immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_IDE_RESET; } diff --git a/board/ivm/u-boot.lds b/board/ivm/u-boot.lds index 1e843eb24e..4cca652748 100644 --- a/board/ivm/u-boot.lds +++ b/board/ivm/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/ivm/u-boot.lds.debug b/board/ivm/u-boot.lds.debug index 732a46f272..53a19b2947 100644 --- a/board/ivm/u-boot.lds.debug +++ b/board/ivm/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index e01a633aae..83a8753e5a 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -56,7 +56,7 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { {5, 2, 1, 0, 1}, /* UART2_RTS */ {5, 3, 2, 0, 2}, /* UART2_SIN */ {5, 1, 2, 0, 3}, /* UART2_CTS */ -#else +#elif !defined(CONFIG_MPC8309) /* Local Bus */ {0, 16, 1, 0, 3}, /* LA00 */ {0, 17, 1, 0, 3}, /* LA01 */ diff --git a/board/kmc/kzm9g/kzm9g.c b/board/kmc/kzm9g/kzm9g.c index 525c97aea6..54f25e097c 100644 --- a/board/kmc/kzm9g/kzm9g.c +++ b/board/kmc/kzm9g/kzm9g.c @@ -43,6 +43,7 @@ DECLARE_GLOBAL_DATA_PTR; #define SMSTPCR1_CMT0 (1 << 24) #define SMSTPCR1_I2C0 (1 << 16) #define SMSTPCR3_USB (1 << 22) +#define SMSTPCR3_I2C1 (1 << 23) #define PORT32CR (0xE6051020) #define PORT33CR (0xE6051021) @@ -287,8 +288,8 @@ int board_early_init_f(void) clrbits_le32(&cpg->smstpcr1, (SMSTPCR1_CMT0|SMSTPCR1_I2C0)); clrbits_le32(&cpg_srcr->srcr1, (SMSTPCR1_CMT0|SMSTPCR1_I2C0)); - clrbits_le32(&cpg->smstpcr3, SMSTPCR3_USB); - clrbits_le32(&cpg_srcr->srcr3, SMSTPCR3_USB); + clrbits_le32(&cpg->smstpcr3, (SMSTPCR3_USB|SMSTPCR3_I2C1)); + clrbits_le32(&cpg_srcr->srcr3, (SMSTPCR3_USB|SMSTPCR3_I2C1)); writel(VCLKCR1_D, &cpg->vclkcr1); /* Setup SCIF4 / workaround */ @@ -343,6 +344,8 @@ int board_init(void) gpio_direction_output(GPIO_PORT15, 1); /* I2C */ + gpio_request(GPIO_FN_PORT237_I2C_SCL2, NULL); + gpio_request(GPIO_FN_PORT236_I2C_SDA2, NULL); gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL); gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL); diff --git a/board/korat/u-boot-F7FC.lds b/board/korat/u-boot-F7FC.lds index 6a017e305c..033cff42d9 100644 --- a/board/korat/u-boot-F7FC.lds +++ b/board/korat/u-boot-F7FC.lds @@ -108,10 +108,10 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/kup/kup4k/u-boot.lds b/board/kup/kup4k/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/kup/kup4k/u-boot.lds +++ b/board/kup/kup4k/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/kup/kup4k/u-boot.lds.debug b/board/kup/kup4k/u-boot.lds.debug index 4491edd944..b43a1e4281 100644 --- a/board/kup/kup4k/u-boot.lds.debug +++ b/board/kup/kup4k/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/kup/kup4x/u-boot.lds b/board/kup/kup4x/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/kup/kup4x/u-boot.lds +++ b/board/kup/kup4x/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/kup/kup4x/u-boot.lds.debug b/board/kup/kup4x/u-boot.lds.debug index 4491edd944..b43a1e4281 100644 --- a/board/kup/kup4x/u-boot.lds.debug +++ b/board/kup/kup4x/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/lantec/flash.c b/board/lantec/flash.c deleted file mode 100644 index 97ed0542bf..0000000000 --- a/board/lantec/flash.c +++ /dev/null @@ -1,625 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Derived from ../tqm8xx/flash.c - * [Torsten Stevens, FHG IMS; Bruno Achauer, Exet AG] - */ - -#include <common.h> -#include <mpc8xx.h> - -#if defined(CONFIG_ENV_IS_IN_FLASH) -# ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -# endif -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif -# ifndef CONFIG_ENV_SECT_SIZE -# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE -# endif -#endif - -/*---------------------------------------------------------------------*/ -#undef DEBUG_FLASH - -#ifdef DEBUG_FLASH -#define DEBUGF(fmt,args...) printf(fmt ,##args) -#else -#define DEBUGF(fmt,args...) -#endif -/*---------------------------------------------------------------------*/ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size_b0, size_b1; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM); - - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0: " - "ID 0x%lx, Size = 0x%08lx = %ld MB\n", - flash_info[0].flash_id, - size_b0, size_b0<<20); - } - - DEBUGF("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE5_PRELIM); - - size_b1 = flash_get_size((vu_long *)FLASH_BASE5_PRELIM, &flash_info[1]); - - DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1); - - if (size_b1 > size_b0) { - printf ("## ERROR: " - "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n", - size_b1, size_b1<<20, - size_b0, size_b0<<20 - ); - flash_info[0].flash_id = FLASH_UNKNOWN; - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[0].sector_count = -1; - flash_info[1].sector_count = -1; - flash_info[0].size = 0; - flash_info[1].size = 0; - return (0); - } - - DEBUGF ("## Before remap: " - "BR0: 0x%08x OR0: 0x%08x " - "BR1: 0x%08x OR1: 0x%08x\n", - memctl->memc_br0, memctl->memc_or0, - memctl->memc_br1, memctl->memc_or1); - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | \ - BR_MS_GPCM | BR_PS_32 | BR_V; - - DEBUGF("## BR0: 0x%08x OR0: 0x%08x\n", - memctl->memc_br0, memctl->memc_or0); - - /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_info[0].size = size_b0; - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[0]); -#endif - - if (size_b1) { - memctl->memc_or5 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000); - memctl->memc_br5 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) | - BR_MS_GPCM | BR_PS_32 | BR_V; - - DEBUGF("## BR5: 0x%08x OR5: 0x%08x\n", - memctl->memc_br5, memctl->memc_or5); - - /* Re-do sizing to get full correct info */ - size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0), - &flash_info[1]); - - flash_info[1].size = size_b1; - - flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[1]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[1]); -#endif - } else { - memctl->memc_br5 = 0; /* invalidate bank */ - memctl->memc_or5 = 0; /* invalidate bank */ - - DEBUGF("## DISABLE BR5: 0x%08x OR5: 0x%08x\n", - memctl->memc_br5, memctl->memc_or5); - - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[1].sector_count = -1; - flash_info[1].size = 0; - } - - DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1); - - return (size_b0 + size_b1); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } - -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - - /* Write auto select command: read Manufacturer ID */ - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00900090; - - value = addr[0]; - - switch (value) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[1]; /* device ID */ - - switch (value) { - case AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ -#if 0 /* enable when device IDs are available */ - case AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - - case AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0x00F000F0; /* reset bank */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00800080; - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long*)(info->start[sect]); - addr[0] = 0x00300030; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long*)(info->start[l_sect]); - while ((addr[0] & 0x00800080) != 0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (volatile unsigned long *)info->start[0]; - addr[0] = 0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long*)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00A000A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/lantec/lantec.c b/board/lantec/lantec.c deleted file mode 100644 index 6d3486c48a..0000000000 --- a/board/lantec/lantec.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * (C) Copyright 2001 - * Torsten Stevens, FHG IMS, stevens@ims.fhg.de - * Bruno Achauer, Exet AG, bruno@exet-ag.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Derived from ../tqm8xx/tqm8xx.c - */ - -#include <common.h> -#include <mpc8xx.h> - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFFFFF - -const uint sdram_table[] = { - /* - * Single Read. (Offset 0 in UPMA RAM) - */ - 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00, - 0x1ff77c47, /* last */ - /* - * SDRAM Initialization (offset 5 in UPMA RAM) - * - * This is no UPM entry point. The following definition uses - * the remaining space to establish an initialization - * sequence, which is executed by a RUN command. - * - */ - 0x1ff77c35, 0xefeabc34, 0x1fb57c35, /* last */ - /* - * Burst Read. (Offset 8 in UPMA RAM) - */ - 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00, - 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Single Write. (Offset 18 in UPMA RAM) - */ - 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Burst Write. (Offset 20 in UPMA RAM) - */ - 0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00, - 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Refresh (Offset 30 in UPMA RAM) - */ - 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04, - 0xfffffc84, 0xfffffc07, 0xfffffc07, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Exception. (Offset 3c in UPMA RAM) - */ - 0x7ffffc07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - * - * Test TQ ID string (TQM8xx...) - * If present, check for "L" type (no second DRAM bank), - * otherwise "L" type is assumed as default. - * - * Return 1 for "L" type, 0 else. - */ - -int checkboard (void) -{ - printf ("Board: Lantec special edition rev.%d\n", CONFIG_LANTEC); - return 0; -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size_b0; - int i; - - /* - * Configure UPMA for SDRAM - */ - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K /* XXX CONFIG_SYS_MPTPR XXX */ ; - - /* burst length=4, burst type=sequential, CAS latency=2 */ - memctl->memc_mar = 0x00000088; - - /* - * Map controller bank 3 to the SDRAM bank at preliminary address. - */ - memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; - memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; - - /* initialize memory address register */ - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; /* refresh not enabled yet */ - - /* mode initialization (offset 5) */ - udelay (200); /* 0x80006105 */ - memctl->memc_mcr = - MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x05); - - /* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */ - udelay (1); /* 0x80006130 */ - memctl->memc_mcr = - MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30); - udelay (1); /* 0x80006130 */ - memctl->memc_mcr = - MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30); - - udelay (1); /* 0x80006106 */ - memctl->memc_mcr = - MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06); - - memctl->memc_mamr |= MAMR_PTAE; /* refresh enabled */ - - udelay (200); - - /* Need at least 10 DRAM accesses to stabilize */ - for (i = 0; i < 10; ++i) { - volatile unsigned long *addr = - (volatile unsigned long *) SDRAM_BASE3_PRELIM; - unsigned long val; - - val = *(addr + i); - *(addr + i) = val; - } - - /* - * Check Bank 0 Memory Size for re-configuration - */ - size_b0 = dram_size (CONFIG_SYS_MAMR_8COL, - (long *) SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); - - memctl->memc_mamr = CONFIG_SYS_MAMR_8COL | MAMR_PTAE; - - /* - * Final mapping: - */ - - memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; - memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - udelay (1000); - - return (size_b0); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size (base, maxsize)); -} diff --git a/board/lantec/u-boot.lds b/board/lantec/u-boot.lds deleted file mode 100644 index de0b355a62..0000000000 --- a/board/lantec/u-boot.lds +++ /dev/null @@ -1,105 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - net/libnet.o (.text*) - arch/powerpc/lib/libpowerpc.o (.text*) - drivers/rtc/librtc.o (.text*) - - . = env_offset; - common/env_embedded.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/lantec/u-boot.lds.debug b/board/lantec/u-boot.lds.debug deleted file mode 100644 index 856a99b6f9..0000000000 --- a/board/lantec/u-boot.lds.debug +++ /dev/null @@ -1,135 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/linkstation/ide.c b/board/linkstation/ide.c index f3e3fce824..541c958fca 100644 --- a/board/linkstation/ide.c +++ b/board/linkstation/ide.c @@ -37,7 +37,6 @@ #define IT8212_PCI_IdeBusSkewCONTROL 0x4c #define IT8212_PCI_IdeDrivingCURRENT 0x42 -extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS]; extern struct pci_controller hose; int ide_preinit (void) diff --git a/board/lubbock/lubbock.c b/board/lubbock/lubbock.c index 3527b381df..ef2cc24aae 100644 --- a/board/lubbock/lubbock.c +++ b/board/lubbock/lubbock.c @@ -29,6 +29,7 @@ #include <netdev.h> #include <asm/arch/pxa.h> #include <asm/arch/pxa-regs.h> +#include <asm/arch/regs-mmc.h> #include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -56,6 +57,14 @@ int board_init (void) return 0; } +#ifdef CONFIG_CMD_MMC +int board_mmc_init(bd_t *bis) +{ + pxa_mmc_register(0); + return 0; +} +#endif + int board_late_init(void) { setenv("stdout", "serial"); diff --git a/board/lwmon/u-boot.lds b/board/lwmon/u-boot.lds index 8bf7324f37..bc71b0d2c1 100644 --- a/board/lwmon/u-boot.lds +++ b/board/lwmon/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/lwmon/u-boot.lds.debug b/board/lwmon/u-boot.lds.debug index 241223481b..0a3e6466a9 100644 --- a/board/lwmon/u-boot.lds.debug +++ b/board/lwmon/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/manroland/uc100/u-boot.lds b/board/manroland/uc100/u-boot.lds index 731cec9af7..e32ae37ea4 100644 --- a/board/manroland/uc100/u-boot.lds +++ b/board/manroland/uc100/u-boot.lds @@ -69,9 +69,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/matrix_vision/mvsmr/u-boot.lds b/board/matrix_vision/mvsmr/u-boot.lds index 57c37deb89..5a3a9eabbf 100644 --- a/board/matrix_vision/mvsmr/u-boot.lds +++ b/board/matrix_vision/mvsmr/u-boot.lds @@ -74,9 +74,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/mbx8xx/u-boot.lds b/board/mbx8xx/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/mbx8xx/u-boot.lds +++ b/board/mbx8xx/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/mbx8xx/u-boot.lds.debug b/board/mbx8xx/u-boot.lds.debug index a95c47feac..4155b604fb 100644 --- a/board/mbx8xx/u-boot.lds.debug +++ b/board/mbx8xx/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/micronas/vct/u-boot.lds b/board/micronas/vct/u-boot.lds index 3a05ef9049..2ce8d0e158 100644 --- a/board/micronas/vct/u-boot.lds +++ b/board/micronas/vct/u-boot.lds @@ -53,10 +53,8 @@ SECTIONS .sdata : { *(.sdata*) } . = ALIGN(4); - .u_boot_cmd : { - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; + .u_boot_list : { + #include <u-boot.lst> } . = ALIGN(4); diff --git a/board/mousse/u-boot.lds b/board/mousse/u-boot.lds index dae2cfc7da..43f91f1a3c 100644 --- a/board/mousse/u-boot.lds +++ b/board/mousse/u-boot.lds @@ -60,9 +60,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/mousse/u-boot.lds.ram b/board/mousse/u-boot.lds.ram index b3364be48c..5255651347 100644 --- a/board/mousse/u-boot.lds.ram +++ b/board/mousse/u-boot.lds.ram @@ -85,9 +85,6 @@ SECTIONS } > ram */ - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; __start___ex_table = .; __ex_table : { *(__ex_table) } > ram diff --git a/board/mousse/u-boot.lds.rom b/board/mousse/u-boot.lds.rom index b4b9e02e52..29a34fb9c5 100644 --- a/board/mousse/u-boot.lds.rom +++ b/board/mousse/u-boot.lds.rom @@ -102,9 +102,6 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; __start___ex_table = .; __ex_table : { *(__ex_table) } diff --git a/board/mpl/pip405/u-boot.lds.debug b/board/mpl/pip405/u-boot.lds.debug index fcf8ebbf8e..d7a2e56008 100644 --- a/board/mpl/pip405/u-boot.lds.debug +++ b/board/mpl/pip405/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/mvblue/u-boot.lds b/board/mvblue/u-boot.lds index 11624d21f5..c378564f6d 100644 --- a/board/mvblue/u-boot.lds +++ b/board/mvblue/u-boot.lds @@ -70,9 +70,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/netphone/u-boot.lds b/board/netphone/u-boot.lds index a949e4f592..cdc1fdac2c 100644 --- a/board/netphone/u-boot.lds +++ b/board/netphone/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/netphone/u-boot.lds.debug b/board/netphone/u-boot.lds.debug index a001f3fd87..900da64859 100644 --- a/board/netphone/u-boot.lds.debug +++ b/board/netphone/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/netta/u-boot.lds b/board/netta/u-boot.lds index a949e4f592..cdc1fdac2c 100644 --- a/board/netta/u-boot.lds +++ b/board/netta/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/netta/u-boot.lds.debug b/board/netta/u-boot.lds.debug index a001f3fd87..900da64859 100644 --- a/board/netta/u-boot.lds.debug +++ b/board/netta/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/netta2/u-boot.lds b/board/netta2/u-boot.lds index a949e4f592..cdc1fdac2c 100644 --- a/board/netta2/u-boot.lds +++ b/board/netta2/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/netta2/u-boot.lds.debug b/board/netta2/u-boot.lds.debug index a001f3fd87..900da64859 100644 --- a/board/netta2/u-boot.lds.debug +++ b/board/netta2/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/netvia/u-boot.lds b/board/netvia/u-boot.lds index a949e4f592..cdc1fdac2c 100644 --- a/board/netvia/u-boot.lds +++ b/board/netvia/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/netvia/u-boot.lds.debug b/board/netvia/u-boot.lds.debug index 6c7d698c95..6cbf4dc66e 100644 --- a/board/netvia/u-boot.lds.debug +++ b/board/netvia/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/c2mon/Makefile b/board/nokia/rx51/Makefile index b49f26da27..86fb48cc99 100644 --- a/board/c2mon/Makefile +++ b/board/nokia/rx51/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2001-2006 +# (C) Copyright 2000, 2001, 2002 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,11 +25,13 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS = $(BOARD).o flash.o pcmcia.o +COBJS-y := $(BOARD).o +SOBJS-y := lowlevel_init.o -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) +COBJS := $(sort $(COBJS-y)) +SOBJS := $(sort $(SOBJS-y)) +SRCS := $(COBJS:.o=.c) $(SOBJS:.o=.S) +OBJS := $(addprefix $(obj),$(COBJS)) $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) diff --git a/board/nokia/rx51/lowlevel_init.S b/board/nokia/rx51/lowlevel_init.S new file mode 100644 index 0000000000..055b1038d1 --- /dev/null +++ b/board/nokia/rx51/lowlevel_init.S @@ -0,0 +1,209 @@ +/* + * (C) Copyright 2011-2012 + * Pali Rohár <pali.rohar@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + +relocaddr: /* address of this relocaddr section after coping */ + .word . /* address of section (calculated at compile time) */ + +startaddr: /* address of u-boot after copying */ + .word CONFIG_SYS_TEXT_BASE + +kernaddr: /* address of kernel after copying */ + .word KERNEL_ADDRESS + +kernsize: /* maximal size of kernel image */ + .word KERNEL_MAXSIZE + +kernoffs: /* offset of kernel image in loaded u-boot */ + .word KERNEL_OFFSET + +imagesize: /* maximal size of image */ + .word IMAGE_MAXSIZE + +ih_magic: /* IH_MAGIC in big endian from include/image.h */ + .word 0x56190527 + +/* + * Routine: save_boot_params (called after reset from start.S) + * Description: Copy attached kernel to address KERNEL_ADDRESS + * Copy u-boot to address CONFIG_SYS_TEXT_BASE + * Return to copied u-boot address + */ + +.global save_boot_params +save_boot_params: + + +/* Copy valid attached kernel to address KERNEL_ADDRESS */ + +copy_kernel_start: + adr r0, relocaddr /* r0 - address of section relocaddr */ + ldr r1, relocaddr /* r1 - address of relocaddr after relocation */ + cmp r0, r1 + + /* r4 - calculated offset */ + subhi r4, r0, r1 + sublo r4, r1, r0 + + /* r0 - start of kernel before */ + ldr r0, startaddr + addhi r0, r0, r4 + sublo r0, r0, r4 + ldr r1, kernoffs + add r0, r0, r1 + + /* r3 - start of kernel after */ + ldr r3, kernaddr + + /* r2 - end of kernel after */ + ldr r1, kernsize + add r2, r3, r1 + + /* r1 - end of kernel before */ + add r1, r0, r1 + + /* remove header in target kernel */ + mov r5, #0 + str r5, [r3] + + /* check for valid kernel uImage */ + ldr r4, [r0] /* r4 - 4 bytes header of kernel */ + ldr r5, ih_magic /* r5 - IH_MAGIC */ + cmp r4, r5 + bne copy_kernel_end /* skip if invalid image */ + +copy_kernel_loop: + ldmdb r1!, {r3 - r10} + stmdb r2!, {r3 - r10} + cmp r1, r0 + bhi copy_kernel_loop + +copy_kernel_end: + mov r5, #0 + str r5, [r0] /* remove 4 bytes header of kernel */ + + +/* Fix u-boot code */ + +fix_start: + adr r0, relocaddr /* r0 - address of section relocaddr */ + ldr r1, relocaddr /* r1 - address of relocaddr after relocation */ + cmp r0, r1 + + beq copy_uboot_end /* skip if u-boot is on correct address */ + + /* r5 - calculated offset */ + subhi r5, r0, r1 + sublo r5, r1, r0 + + /* r6 - maximal u-boot size */ + ldr r6, imagesize + + /* fix return address */ + subhi lr, lr, r5 + addlo lr, lr, r5 + + /* r1 - start of u-boot after */ + ldr r1, startaddr + + /* r0 - start of u-boot before */ + addhi r0, r1, r5 + sublo r0, r1, r5 + + /* check if we need to move uboot copy code before calling it */ + cmp r5, r6 + bhi copy_uboot_start /* now coping u-boot code directly is safe */ + + +copy_code_start: + /* r0 - start of u-boot before */ + /* r1 - start of u-boot after */ + /* r6 - maximal u-boot size */ + + /* r7 - maximal kernel size */ + ldr r7, kernsize + + /* r4 - end of kernel before */ + add r4, r0, r6 + add r4, r4, r7 + + /* r5 - end of u-boot after */ + ldr r5, startaddr + add r5, r5, r6 + + /* r2 - start of loop code after */ + cmp r4, r5 /* higher address (r4 or r5) */ + movhs r2, r4 + movlo r2, r5 + + /* r3 - end of loop code before */ + adr r3, end + + /* r4 - end of loop code after */ + adr r4, copy_uboot_start + sub r4, r3, r4 + add r4, r2, r4 + +copy_code_loop: + ldmdb r3!, {r7 - r10} + stmdb r4!, {r7 - r10} + cmp r4, r2 + bhi copy_code_loop + +copy_code_end: + mov pc, r2 + + +/* Copy u-boot to address CONFIG_SYS_TEXT_BASE */ + +copy_uboot_start: + /* r0 - start of u-boot before */ + /* r1 - start of u-boot after */ + /* r6 - maximal u-boot size */ + + /* r2 - end of u-boot after */ + add r2, r1, r6 + + /* condition for copying from left to right */ + cmp r0, r1 + addlo r1, r0, r6 /* r1 - end of u-boot before */ + blo copy_uboot_loop_right + +copy_uboot_loop_left: + ldmia r0!, {r3 - r10} + stmia r1!, {r3 - r10} + cmp r1, r2 + blo copy_uboot_loop_left + b copy_uboot_end + +copy_uboot_loop_right: + ldmdb r1!, {r3 - r10} + stmdb r2!, {r3 - r10} + cmp r1, r0 + bhi copy_uboot_loop_right + +copy_uboot_end: + bx lr + +end: diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c new file mode 100644 index 0000000000..b2fe1c531a --- /dev/null +++ b/board/nokia/rx51/rx51.c @@ -0,0 +1,677 @@ +/* + * (C) Copyright 2012 + * Ивайло Димитров <freemangordon@abv.bg> + * + * (C) Copyright 2011-2012 + * Pali Rohár <pali.rohar@gmail.com> + * + * (C) Copyright 2010 + * Alistair Buxton <a.j.buxton@gmail.com> + * + * Derived from Beagle Board and 3430 SDP code: + * (C) Copyright 2004-2008 + * Texas Instruments, <www.ti.com> + * + * Author : + * Sunil Kumar <sunilsaini05@gmail.com> + * Shashi Ranjan <shashiranjanmca05@gmail.com> + * + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <watchdog.h> +#include <malloc.h> +#include <twl4030.h> +#include <i2c.h> +#include <video_fb.h> +#include <asm/io.h> +#include <asm/setup.h> +#include <asm/bitops.h> +#include <asm/mach-types.h> +#include <asm/arch/mux.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mmc_host_def.h> + +#include "rx51.h" +#include "tag_omap.h" + +DECLARE_GLOBAL_DATA_PTR; + +GraphicDevice gdev; + +const omap3_sysinfo sysinfo = { + DDR_STACKED, + "Nokia RX-51", + "OneNAND" +}; + +/* This structure contains default omap tags needed for booting Maemo 5 */ +static struct tag_omap omap[] = { + OMAP_TAG_UART_CONFIG(0x04), + OMAP_TAG_SERIAL_CONSOLE_CONFIG(0x03, 0x01C200), + OMAP_TAG_LCD_CONFIG("acx565akm", "internal", 90, 0x18), + OMAP_TAG_GPIO_SWITCH_CONFIG("cam_focus", 0x44, 0x1, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cam_launch", 0x45, 0x1, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cam_shutter", 0x6e, 0x1, 0x0, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_apeslpx", 0x46, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_bsi", 0x9d, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_en", 0x4a, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst", 0x4b, 0x6, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst_rq", 0x49, 0x6, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_wddis", 0x0d, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("headphone", 0xb1, 0x1, 0x1, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("kb_lock", 0x71, 0x1, 0x0, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("proximity", 0x59, 0x0, 0x0, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("sleep_ind", 0xa2, 0x2, 0x2, 0x0), + OMAP_TAG_GPIO_SWITCH_CONFIG("slide", GPIO_SLIDE, 0x0, 0x0, 0x0), + OMAP_TAG_WLAN_CX3110X_CONFIG(0x25, 0xff, 87, 42, -1), + OMAP_TAG_PARTITION_CONFIG(PART1_NAME, PART1_SIZE * PART1_MULL, + PART1_OFFS, PART1_MASK), + OMAP_TAG_PARTITION_CONFIG(PART2_NAME, PART2_SIZE * PART2_MULL, + PART2_OFFS, PART2_MASK), + OMAP_TAG_PARTITION_CONFIG(PART3_NAME, PART3_SIZE * PART3_MULL, + PART3_OFFS, PART3_MASK), + OMAP_TAG_PARTITION_CONFIG(PART4_NAME, PART4_SIZE * PART4_MULL, + PART4_OFFS, PART4_MASK), + OMAP_TAG_PARTITION_CONFIG(PART5_NAME, PART5_SIZE * PART5_MULL, + PART5_OFFS, PART5_MASK), + OMAP_TAG_PARTITION_CONFIG(PART6_NAME, PART6_SIZE * PART6_MULL, + PART6_OFFS, PART6_MASK), + OMAP_TAG_BOOT_REASON_CONFIG("pwr_key"), + OMAP_TAG_VERSION_STR_CONFIG("product", "RX-51"), + OMAP_TAG_VERSION_STR_CONFIG("hw-build", "2101"), + OMAP_TAG_VERSION_STR_CONFIG("nolo", "1.4.14"), + OMAP_TAG_VERSION_STR_CONFIG("boot-mode", "normal"), + { } +}; + +static char *boot_reason_ptr; +static char *hw_build_ptr; +static char *nolo_version_ptr; +static char *boot_mode_ptr; + +/* + * Routine: init_omap_tags + * Description: Initialize pointers to values in tag_omap + */ +static void init_omap_tags(void) +{ + char *component; + char *version; + int i = 0; + while (omap[i].hdr.tag) { + switch (omap[i].hdr.tag) { + case OMAP_TAG_BOOT_REASON: + boot_reason_ptr = omap[i].u.boot_reason.reason_str; + break; + case OMAP_TAG_VERSION_STR: + component = omap[i].u.version.component; + version = omap[i].u.version.version; + if (strcmp(component, "hw-build") == 0) + hw_build_ptr = version; + else if (strcmp(component, "nolo") == 0) + nolo_version_ptr = version; + else if (strcmp(component, "boot-mode") == 0) + boot_mode_ptr = version; + break; + default: + break; + } + i++; + } +} + +static void reuse_omap_atags(struct tag_omap *t) +{ + char *component; + char *version; + while (t->hdr.tag) { + switch (t->hdr.tag) { + case OMAP_TAG_BOOT_REASON: + memset(boot_reason_ptr, 0, 12); + strcpy(boot_reason_ptr, t->u.boot_reason.reason_str); + break; + case OMAP_TAG_VERSION_STR: + component = t->u.version.component; + version = t->u.version.version; + if (strcmp(component, "hw-build") == 0) { + memset(hw_build_ptr, 0, 12); + strcpy(hw_build_ptr, version); + } else if (strcmp(component, "nolo") == 0) { + memset(nolo_version_ptr, 0, 12); + strcpy(nolo_version_ptr, version); + } else if (strcmp(component, "boot-mode") == 0) { + memset(boot_mode_ptr, 0, 12); + strcpy(boot_mode_ptr, version); + } + break; + default: + break; + } + t = tag_omap_next(t); + } +} + +/* + * Routine: reuse_atags + * Description: Reuse atags from previous bootloader. + * Reuse only only HW build, boot reason, boot mode and nolo + */ +static void reuse_atags(void) +{ + struct tag *t = (struct tag *)gd->bd->bi_boot_params; + + /* First tag must be ATAG_CORE */ + if (t->hdr.tag != ATAG_CORE) + return; + + if (!boot_reason_ptr || !hw_build_ptr) + return; + + /* Last tag must be ATAG_NONE */ + while (t->hdr.tag != ATAG_NONE) { + switch (t->hdr.tag) { + case ATAG_REVISION: + memset(hw_build_ptr, 0, 12); + sprintf(hw_build_ptr, "%x", t->u.revision.rev); + break; + case ATAG_BOARD: + reuse_omap_atags((struct tag_omap *)&t->u); + break; + default: + break; + } + t = tag_next(t); + } +} + +/* + * Routine: board_init + * Description: Early hardware init. + */ +int board_init(void) +{ + /* in SRAM or SDRAM, finish GPMC */ + gpmc_init(); + /* boot param addr */ + gd->bd->bi_boot_params = OMAP34XX_SDRC_CS0 + 0x100; + return 0; +} + +/* + * Routine: get_board_revision + * Description: Return board revision. + */ +u32 get_board_rev(void) +{ + return simple_strtol(hw_build_ptr, NULL, 16); +} + +/* + * Routine: setup_board_tags + * Description: Append board specific boot tags. + */ +void setup_board_tags(struct tag **in_params) +{ + int setup_console_atag; + char *setup_boot_reason_atag; + char *setup_boot_mode_atag; + char *str; + int i; + int size; + int total_size; + struct tag *params; + struct tag_omap *t; + + params = (struct tag *)gd->bd->bi_boot_params; + + params->u.core.flags = 0x0; + params->u.core.pagesize = 0x1000; + params->u.core.rootdev = 0x0; + + /* append omap atag only if env setup_omap_atag is set to 1 */ + str = getenv("setup_omap_atag"); + if (!str || str[0] != '1') + return; + + str = getenv("setup_console_atag"); + if (str && str[0] == '1') + setup_console_atag = 1; + else + setup_console_atag = 0; + + setup_boot_reason_atag = getenv("setup_boot_reason_atag"); + setup_boot_mode_atag = getenv("setup_boot_mode_atag"); + + params = *in_params; + t = (struct tag_omap *)¶ms->u; + total_size = sizeof(struct tag_header); + + for (i = 0; omap[i].hdr.tag; i++) { + + /* skip serial console tag */ + if (!setup_console_atag && + omap[i].hdr.tag == OMAP_TAG_SERIAL_CONSOLE) + continue; + + size = omap[i].hdr.size + sizeof(struct tag_omap_header); + memcpy(t, &omap[i], size); + + /* set uart tag to 0 - disable serial console */ + if (!setup_console_atag && omap[i].hdr.tag == OMAP_TAG_UART) + t->u.uart.enabled_uarts = 0; + + /* change boot reason */ + if (setup_boot_reason_atag && + omap[i].hdr.tag == OMAP_TAG_BOOT_REASON) { + memset(t->u.boot_reason.reason_str, 0, 12); + strcpy(t->u.boot_reason.reason_str, + setup_boot_reason_atag); + } + + /* change boot mode */ + if (setup_boot_mode_atag && + omap[i].hdr.tag == OMAP_TAG_VERSION_STR && + strcmp(omap[i].u.version.component, "boot-mode") == 0) { + memset(t->u.version.version, 0, 12); + strcpy(t->u.version.version, setup_boot_mode_atag); + } + + total_size += size; + t = tag_omap_next(t); + + } + + params->hdr.tag = ATAG_BOARD; + params->hdr.size = total_size >> 2; + params = tag_next(params); + + *in_params = params; +} + +/* + * Routine: video_hw_init + * Description: Set up the GraphicDevice depending on sys_boot. + */ +void *video_hw_init(void) +{ + /* fill in Graphic Device */ + gdev.frameAdrs = 0x8f9c0000; + gdev.winSizeX = 800; + gdev.winSizeY = 480; + gdev.gdfBytesPP = 2; + gdev.gdfIndex = GDF_16BIT_565RGB; + memset((void *)gdev.frameAdrs, 0, 0xbb800); + return (void *) &gdev; +} + +/* + * Routine: twl4030_regulator_set_mode + * Description: Set twl4030 regulator mode over i2c powerbus. + */ +static void twl4030_regulator_set_mode(u8 id, u8 mode) +{ + u16 msg = MSG_SINGULAR(DEV_GRP_P1, id, mode); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg >> 8, + TWL4030_PM_MASTER_PB_WORD_MSB); + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg & 0xff, + TWL4030_PM_MASTER_PB_WORD_LSB); +} + +static void omap3_emu_romcode_call(u32 service_id, u32 *parameters) +{ + u32 i, num_params = *parameters; + u32 *sram_scratch_space = (u32 *)OMAP3_PUBLIC_SRAM_SCRATCH_AREA; + + /* + * copy the parameters to an un-cached area to avoid coherency + * issues + */ + for (i = 0; i < num_params; i++) { + __raw_writel(*parameters, sram_scratch_space); + parameters++; + sram_scratch_space++; + } + + /* Now make the PPA call */ + do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA); +} + +/* + * Routine: omap3_update_aux_cr_secure_rx51 + * Description: Modify the contents Auxiliary Control Register. + * Parameters: + * set_bits - bits to set in ACR + * clr_bits - bits to clear in ACR + */ +static void omap3_update_aux_cr_secure_rx51(u32 set_bits, u32 clear_bits) +{ + struct emu_hal_params_rx51 emu_romcode_params = { 0, }; + u32 acr; + + /* Read ACR */ + asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); + acr &= ~clear_bits; + acr |= set_bits; + + emu_romcode_params.num_params = 2; + emu_romcode_params.param1 = acr; + + omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR, + (u32 *)&emu_romcode_params); +} + +/* + * Routine: misc_init_r + * Description: Configure board specific parts. + */ +int misc_init_r(void) +{ + char buf[12]; + u8 state; + + /* reset lp5523 led */ + i2c_set_bus_num(1); + state = 0xff; + i2c_write(0x32, 0x3d, 1, &state, 1); + i2c_set_bus_num(0); + + /* initialize twl4030 power managment */ + twl4030_power_init(); + + /* set VSIM to 1.8V */ + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED, + TWL4030_PM_RECEIVER_VSIM_VSEL_18, + TWL4030_PM_RECEIVER_VSIM_DEV_GRP, + TWL4030_PM_RECEIVER_DEV_GRP_P1); + + /* store I2C access state */ + twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &state, + TWL4030_PM_MASTER_PB_CFG); + + /* enable I2C access to powerbus (needed for twl4030 regulator) */ + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x02, + TWL4030_PM_MASTER_PB_CFG); + + /* set VAUX3, VSIM and VMMC1 state to active - enable eMMC memory */ + twl4030_regulator_set_mode(RES_VAUX3, RES_STATE_ACTIVE); + twl4030_regulator_set_mode(RES_VSIM, RES_STATE_ACTIVE); + twl4030_regulator_set_mode(RES_VMMC1, RES_STATE_ACTIVE); + + /* restore I2C access state */ + twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, state, + TWL4030_PM_MASTER_PB_CFG); + + /* set env variable attkernaddr for relocated kernel */ + sprintf(buf, "%#x", KERNEL_ADDRESS); + setenv("attkernaddr", buf); + + /* initialize omap tags */ + init_omap_tags(); + + /* reuse atags from previous bootloader */ + reuse_atags(); + + dieid_num_r(); + print_cpuinfo(); + + /* + * Cortex-A8(r1p0..r1p2) errata 430973 workaround + * Set IBE bit in Auxiliary Control Register + */ + omap3_update_aux_cr_secure_rx51(1 << 6, 0); + + return 0; +} + +/* + * Routine: set_muxconf_regs + * Description: Setting up the configuration Mux registers specific to the + * hardware. Many pins need to be moved from protect to primary + * mode. + */ +void set_muxconf_regs(void) +{ + MUX_RX51(); +} + +static unsigned long int twl_wd_time; /* last time of watchdog reset */ +static unsigned long int twl_i2c_lock; + +/* + * Routine: hw_watchdog_reset + * Description: Reset timeout of twl4030 watchdog. + */ +void hw_watchdog_reset(void) +{ + u8 timeout = 0; + + /* do not reset watchdog too often - max every 4s */ + if (get_timer(twl_wd_time) < 4 * CONFIG_SYS_HZ) + return; + + /* localy lock twl4030 i2c bus */ + if (test_and_set_bit(0, &twl_i2c_lock)) + return; + + /* read actual watchdog timeout */ + twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER, &timeout, + TWL4030_PM_RECEIVER_WATCHDOG_CFG); + + /* timeout 0 means watchdog is disabled */ + /* reset watchdog timeout to 31s (maximum) */ + if (timeout != 0) + twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 31, + TWL4030_PM_RECEIVER_WATCHDOG_CFG); + + /* store last watchdog reset time */ + twl_wd_time = get_timer(0); + + /* localy unlock twl4030 i2c bus */ + test_and_clear_bit(0, &twl_i2c_lock); +} + +/* + * TWL4030 keypad handler for cfb_console + */ + +static const char keymap[] = { + /* normal */ + 'q', 'o', 'p', ',', '\b', 0, 'a', 's', + 'w', 'd', 'f', 'g', 'h', 'j', 'k', 'l', + 'e', '.', 0, '\r', 0, 'z', 'x', 'c', + 'r', 'v', 'b', 'n', 'm', ' ', ' ', 0, + 't', 0, 0, 0, 0, 0, 0, 0, + 'y', 0, 0, 0, 0, 0, 0, 0, + 'u', 0, 0, 0, 0, 0, 0, 0, + 'i', 5, 6, 0, 0, 0, 0, 0, + /* fn */ + '1', '9', '0', '=', '\b', 0, '*', '+', + '2', '#', '-', '_', '(', ')', '&', '!', + '3', '?', '^', '\r', 0, 156, '$', 238, + '4', '/', '\\', '"', '\'', '@', 0, '<', + '5', '|', '>', 0, 0, 0, 0, 0, + '6', 0, 0, 0, 0, 0, 0, 0, + '7', 0, 0, 0, 0, 0, 0, 0, + '8', 16, 17, 0, 0, 0, 0, 0, +}; + +static u8 keys[8]; +static u8 old_keys[8] = {0, 0, 0, 0, 0, 0, 0, 0}; +#define KEYBUF_SIZE 32 +static u8 keybuf[KEYBUF_SIZE]; +static u8 keybuf_head; +static u8 keybuf_tail; + +/* + * Routine: rx51_kp_init + * Description: Initialize HW keyboard. + */ +int rx51_kp_init(void) +{ + int ret = 0; + u8 ctrl; + ret = twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &ctrl, + TWL4030_KEYPAD_KEYP_CTRL_REG); + + if (ret) + return ret; + + /* turn on keyboard and use hardware scanning */ + ctrl |= TWL4030_KEYPAD_CTRL_KBD_ON; + ctrl |= TWL4030_KEYPAD_CTRL_SOFT_NRST; + ctrl |= TWL4030_KEYPAD_CTRL_SOFTMODEN; + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, ctrl, + TWL4030_KEYPAD_KEYP_CTRL_REG); + /* enable key event status */ + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0xfe, + TWL4030_KEYPAD_KEYP_IMR1); + /* enable interrupt generation on rising and falling */ + /* this is a workaround for qemu twl4030 emulation */ + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x57, + TWL4030_KEYPAD_KEYP_EDR); + /* enable ISR clear on read */ + ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x05, + TWL4030_KEYPAD_KEYP_SIH_CTRL); + return 0; +} + +static void rx51_kp_fill(u8 k, u8 mods) +{ + /* check if some cursor key without meta fn key was pressed */ + if (!(mods & 2) && (k == 18 || k == 31 || k == 33 || k == 34)) { + keybuf[keybuf_tail++] = '\e'; + keybuf_tail %= KEYBUF_SIZE; + keybuf[keybuf_tail++] = '['; + keybuf_tail %= KEYBUF_SIZE; + if (k == 18) /* up */ + keybuf[keybuf_tail++] = 'A'; + else if (k == 31) /* left */ + keybuf[keybuf_tail++] = 'D'; + else if (k == 33) /* down */ + keybuf[keybuf_tail++] = 'B'; + else if (k == 34) /* right */ + keybuf[keybuf_tail++] = 'C'; + keybuf_tail %= KEYBUF_SIZE; + return; + } + + if (mods & 2) { /* fn meta key was pressed */ + k = keymap[k+64]; + } else { + k = keymap[k]; + if (mods & 1) { /* ctrl key was pressed */ + if (k >= 'a' && k <= 'z') + k -= 'a' - 1; + } + if (mods & 4) { /* shift key was pressed */ + if (k >= 'a' && k <= 'z') + k += 'A' - 'a'; + else if (k == '.') + k = ':'; + else if (k == ',') + k = ';'; + } + } + keybuf[keybuf_tail++] = k; + keybuf_tail %= KEYBUF_SIZE; +} + +/* + * Routine: rx51_kp_tstc + * Description: Test if key was pressed (from buffer). + */ +int rx51_kp_tstc(void) +{ + u8 c, r, dk, i; + u8 intr; + u8 mods; + + /* localy lock twl4030 i2c bus */ + if (test_and_set_bit(0, &twl_i2c_lock)) + return 0; + + /* twl4030 remembers up to 2 events */ + for (i = 0; i < 2; i++) { + + /* check interrupt register for events */ + twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &intr, + TWL4030_KEYPAD_KEYP_ISR1+(2*i)); + + /* no event */ + if (!(intr&1)) + continue; + + /* read the key state */ + i2c_read(TWL4030_CHIP_KEYPAD, + TWL4030_KEYPAD_FULL_CODE_7_0, 1, keys, 8); + + /* cut out modifier keys from the keystate */ + mods = keys[4] >> 4; + keys[4] &= 0x0f; + + for (c = 0; c < 8; c++) { + + /* get newly pressed keys only */ + dk = ((keys[c] ^ old_keys[c])&keys[c]); + old_keys[c] = keys[c]; + + /* fill the keybuf */ + for (r = 0; r < 8; r++) { + if (dk&1) + rx51_kp_fill((c*8)+r, mods); + dk = dk >> 1; + } + + } + + } + + /* localy unlock twl4030 i2c bus */ + test_and_clear_bit(0, &twl_i2c_lock); + + return (KEYBUF_SIZE + keybuf_tail - keybuf_head)%KEYBUF_SIZE; +} + +/* + * Routine: rx51_kp_getc + * Description: Get last pressed key (from buffer). + */ +int rx51_kp_getc(void) +{ + keybuf_head %= KEYBUF_SIZE; + while (!rx51_kp_tstc()) + WATCHDOG_RESET(); + return keybuf[keybuf_head++]; +} + +/* + * Routine: board_mmc_init + * Description: Initialize mmc devices. + */ +int board_mmc_init(bd_t *bis) +{ + omap_mmc_init(0, 0, 0); + omap_mmc_init(1, 0, 0); + return 0; +} diff --git a/board/nokia/rx51/rx51.h b/board/nokia/rx51/rx51.h new file mode 100644 index 0000000000..e66e241488 --- /dev/null +++ b/board/nokia/rx51/rx51.h @@ -0,0 +1,389 @@ +/* + * (C) Copyright 2012 + * Ивайло Димитров <freemangordon@abv.bg> + * + * (C) Copyright 2011-2012 + * Pali Rohár <pali.rohar@gmail.com> + * + * (C) Copyright 2008 + * Dirk Behme <dirk.behme@gmail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _RX51_H_ +#define _RX51_H_ + +/* Needed for ROM SMC call */ +struct emu_hal_params_rx51 { + u32 num_params; + u32 param1; + u32 param2; + u32 param3; + u32 param4; +}; + +int print_cpuinfo(void); + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_RX51() \ +/* SDRC */\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ +/* GPMC */\ + MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\ + MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\ + MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\ + MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\ + MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\ + MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\ + MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\ + MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\ + MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\ + MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\ + MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\ + MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\ + MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\ + MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\ + MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\ + MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\ + MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\ + MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\ + MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\ + MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\ + MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\ + MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\ + MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\ + MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\ + MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ + MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ + MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\ + MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4*/\ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M1)) /*nDMA_REQ2*/\ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1)) /*nDMA_REQ3*/\ + MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1*/\ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*GPMC_WAIT2*/\ + MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*GPMC_WAIT3*/\ + MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV*/\ + MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ + MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0*/\ + MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\ + MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ + MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\ +/* DSS */\ + MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ + MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ + MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ + MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ + MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\ + MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\ + MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\ + MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\ + MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\ + MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\ + MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ + MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ + MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ + MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ + MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ + MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ + MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ + MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ + MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ + MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ + MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ + MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ + MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\ + MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\ + MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\ + MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\ + MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\ + MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\ +/* CAMERA */\ + MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS*/\ + MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS*/\ + MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ + MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ + MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ + MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ + MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ + MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ + MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ + MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ + MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ + MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ + MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ + MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ + MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ + MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ + MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ + MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ + MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ + MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ + MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ + MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ + MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ +/* Audio Interface */\ + MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ + MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLK*/\ + MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ + MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ +/* Expansion card */\ + MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ + MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ + MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ + MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ + MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ + MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ + MUX_VAL(CP(MMC1_DAT4), (IEN | PTU | EN | M0)) /*MMC1_DAT4*/\ + MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M0)) /*MMC1_DAT5*/\ + MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M0)) /*MMC1_DAT6*/\ + MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M0)) /*MMC1_DAT7*/\ +/* Wireless LAN */\ + MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M4)) /*GPIO_130*/\ + MUX_VAL(CP(MMC2_CMD), (IEN | PTU | EN | M4)) /*GPIO_131*/\ + MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | EN | M4)) /*GPIO_132*/\ + MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | EN | M4)) /*GPIO_133*/\ + MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | EN | M4)) /*GPIO_134*/\ + MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | EN | M4)) /*GPIO_135*/\ + MUX_VAL(CP(MMC2_DAT4), (IEN | PTU | EN | M4)) /*GPIO_136*/\ + MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ + MUX_VAL(CP(MMC2_DAT6), (IEN | PTU | EN | M4)) /*GPIO_138*/\ + MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ +/* Bluetooth */\ + MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M1)) /*UART2_CTS*/\ + MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\ + MUX_VAL(CP(MCBSP3_FSX), (IEN | PTD | DIS | M1)) /*UART2_RX*/\ + MUX_VAL(CP(UART2_CTS), (IEN | PTD | DIS | M4)) /*GPIO_144*/\ + MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M4)) /*GPIO_145*/\ + MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M4)) /*GPIO_146*/\ + MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M4)) /*GPIO_147*/\ +/* Modem Interface */\ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ + MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/\ + MUX_VAL(CP(UART1_CTS), (IDIS | PTD | DIS | M4)) /*GPIO_150*/\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ + MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M1)) /*SSI1_DAT*/\ + MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M1)) /*SSI1_FLAG*/\ + MUX_VAL(CP(MCBSP4_DX), (IEN | PTD | DIS | M1)) /*SSI1_RDY*/\ + MUX_VAL(CP(MCBSP4_FSX), (IEN | PTD | DIS | M1)) /*SSI1_WAKE*/\ + MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\ + MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | EN | M4)) /*GPIO_157*/\ + MUX_VAL(CP(MCBSP1_DX), (IDIS | PTD | DIS | M4)) /*GPIO_158*/\ + MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ + MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\ + MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\ + MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\ +/* Serial Interface */\ + MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS*/\ + MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS*/\ + MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX*/\ + MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX*/\ + MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ + MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ + MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ + MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ + MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DA0*/\ + MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DA1*/\ + MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DA2*/\ + MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DA3*/\ + MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DA4*/\ + MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DA5*/\ + MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DA6*/\ + MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DA7*/\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M4)) /*GPIO_168*/\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M4)) /*GPIO_183*/\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ + MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\ + MUX_VAL(CP(MCSPI1_CLK), (IEN | PTU | EN | M4)) /*GPIO_171*/\ + MUX_VAL(CP(MCSPI1_SIMO), (IEN | PTU | EN | M4)) /*GPIO_172*/\ + MUX_VAL(CP(MCSPI1_SOMI), (IEN | PTD | DIS | M0)) /*McSPI1_SOM*/\ + MUX_VAL(CP(MCSPI1_CS0), (IEN | PTD | EN | M0)) /*McSPI1_CS0*/\ + MUX_VAL(CP(MCSPI1_CS1), (IDIS | PTD | EN | M0)) /*McSPI1_CS1*/\ + MUX_VAL(CP(MCSPI1_CS2), (IDIS | PTD | DIS | M4)) /*GPIO_176*/\ +/* USB EHCI (port 2) */\ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTU | DIS | M3)) /*HSUSB2_DA2*/\ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTU | DIS | M3)) /*HSUSB2_DA7*/\ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTU | DIS | M3)) /*HSUSB2_DA4*/\ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTU | DIS | M3)) /*HSUSB2_DA5*/\ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTU | DIS | M3)) /*HSUSB2_DA6*/\ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTU | DIS | M3)) /*HSUSB2_DA3*/\ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_CLK*/\ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB2_STP*/\ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DIR*/\ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_NXT*/\ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DA0*/\ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | DIS | M3)) /*HSUSB2_DA1*/\ +/* Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ + MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ + MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2*/\ + MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3*/\ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*MMC1_WP*/\ + MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5*/\ + MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6*/\ + MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7*/\ + MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M4)) /*GPIO_8*/\ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MD*/\ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT*/\ + MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\ + MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_STP*/\ + MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\ + MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA0*/\ + MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA1*/\ + MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA2*/\ + MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA7*/\ + MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA4*/\ + MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA5*/\ + MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA6*/\ + MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DA3*/\ + MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DIR*/\ + MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_NXT*/\ + MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ + MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ + MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ + MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ + MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ + MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ + MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ + MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ + MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ + MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ + MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ + MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ + MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ + MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ + MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ + MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ + MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ + MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ + MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ + MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ + MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ + MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ + MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ + MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ + MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ + MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ + MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ + MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ + MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ + MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ + MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ + MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ + MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ + MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ + MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ + MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ + MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26m*/\ + MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespw*/\ + MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswa*/\ + MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9ni*/\ + MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6*/\ + MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\ + MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\ + MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmare0*/\ + MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmare1*/\ + MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmare2*/\ + MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmare3*/\ + MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrs*/\ + MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ + MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ + MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ + MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ + MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtc*/\ + MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeu*/\ + MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlere*/\ + MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleac*/\ + MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ + MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ + MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ + MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ + MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusfl*/\ + MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusfl*/\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/ + +#define MUX_RX51_C() \ + MUX_VAL(CP(MCBSP3_DX), (IEN | PTD | DIS | M4)) /*GPIO_140*/\ + MUX_VAL(CP(MCBSP3_DR), (IEN | PTD | DIS | M4)) /*GPIO_142*/\ + MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTD | DIS | M4)) /*GPIO_141*/\ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) /*UART2_CTS*/\ + MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) /*UART2_RTS*/\ + MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) /*UART2_TX*/ + +#endif diff --git a/board/nokia/rx51/tag_omap.h b/board/nokia/rx51/tag_omap.h new file mode 100644 index 0000000000..60fa26f3e1 --- /dev/null +++ b/board/nokia/rx51/tag_omap.h @@ -0,0 +1,311 @@ +/* + * (C) Copyright 2011-2012 + * Pali Rohár <pali.rohar@gmail.com> + * + * (C) Copyright 2011 + * marcel@mesa.nl, Mesa Consulting B.V. + * + * (C) Copyright 2004-2005 + * Nokia Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +/* + * Code copied from maemo kernel 2.6.28 file + * arch/arm/plat-omap/include/mach/board.h + * + * Information structures for board-specific data + * + * Copyright (C) 2004 Nokia Corporation + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + */ + +/* Different peripheral ids */ +#define OMAP_TAG_CLOCK 0x4f01 +#define OMAP_TAG_SERIAL_CONSOLE 0x4f03 +#define OMAP_TAG_USB 0x4f04 +#define OMAP_TAG_LCD 0x4f05 +#define OMAP_TAG_GPIO_SWITCH 0x4f06 +#define OMAP_TAG_UART 0x4f07 +#define OMAP_TAG_FBMEM 0x4f08 +#define OMAP_TAG_STI_CONSOLE 0x4f09 +#define OMAP_TAG_CAMERA_SENSOR 0x4f0a +#define OMAP_TAG_PARTITION 0x4f0b +#define OMAP_TAG_TEA5761 0x4f10 +#define OMAP_TAG_TMP105 0x4f11 + +#define OMAP_TAG_BOOT_REASON 0x4f80 +#define OMAP_TAG_FLASH_PART_STR 0x4f81 +#define OMAP_TAG_VERSION_STR 0x4f82 + +#define OMAP_TAG_NOKIA_BT 0x4e01 +#define OMAP_TAG_WLAN_CX3110X 0x4e02 +#define OMAP_TAG_CBUS 0x4e03 +#define OMAP_TAG_EM_ASIC_BB5 0x4e04 + + +struct omap_clock_config { + /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */ + u8 system_clock_type; +}; + +struct omap_serial_console_config { + u8 console_uart; + u32 console_speed; +}; + +struct omap_sti_console_config { + unsigned enable:1; + u8 channel; +}; + +struct omap_usb_config { + /* Configure drivers according to the connectors on your board: + * - "A" connector (rectagular) + * ... for host/OHCI use, set "register_host". + * - "B" connector (squarish) or "Mini-B" + * ... for device/gadget use, set "register_dev". + * - "Mini-AB" connector (very similar to Mini-B) + * ... for OTG use as device OR host, initialize "otg" + */ + unsigned register_host:1; + unsigned register_dev:1; + u8 otg; /* port number, 1-based: usb1 == 2 */ + + u8 hmc_mode; + + /* implicitly true if otg: host supports remote wakeup? */ + u8 rwc; + + /* signaling pins used to talk to transceiver on usbN: + * 0 == usbN unused + * 2 == usb0-only, using internal transceiver + * 3 == 3 wire bidirectional + * 4 == 4 wire bidirectional + * 6 == 6 wire unidirectional (or TLL) + */ + u8 pins[3]; +}; + +struct omap_lcd_config { + char panel_name[16]; + char ctrl_name[16]; + s16 nreset_gpio; + u8 data_lines; +}; + +struct omap_fbmem_config { + u32 start; + u32 size; +}; + +struct omap_gpio_switch_config { + char name[12]; + u16 gpio; + u8 flags:4; + u8 type:4; + unsigned int key_code:24; /* Linux key code */ +}; + +struct omap_uart_config { + /* Bit field of UARTs present; bit 0 --> UART1 */ + unsigned int enabled_uarts; +}; + +struct omap_tea5761_config { + u16 enable_gpio; +}; + +struct omap_partition_config { + char name[16]; + unsigned int size; + unsigned int offset; + /* same as in include/linux/mtd/partitions.h */ + unsigned int mask_flags; +}; + +struct omap_flash_part_str_config { + char part_table[0]; +}; + +struct omap_boot_reason_config { + char reason_str[12]; +}; + +struct omap_version_config { + char component[12]; + char version[12]; +}; + +/* + * Code copied from maemo kernel 2.6.28 file + * arch/arm/plat-omap/include/mach/board-nokia.h + * + * Information structures for Nokia-specific board config data + * + * Copyright (C) 2005 Nokia Corporation + */ + +struct omap_bluetooth_config { + u8 chip_type; + u8 bt_wakeup_gpio; + u8 host_wakeup_gpio; + u8 reset_gpio; + u8 bt_uart; + u8 bd_addr[6]; + u8 bt_sysclk; +}; + +struct omap_wlan_cx3110x_config { + u8 chip_type; + u8 reserverd; + s16 power_gpio; + s16 irq_gpio; + s16 spi_cs_gpio; +}; + +struct omap_cbus_config { + s16 clk_gpio; + s16 dat_gpio; + s16 sel_gpio; +}; + +struct omap_em_asic_bb5_config { + s16 retu_irq_gpio; + s16 tahvo_irq_gpio; +}; + +/* + * omap_tag handling + * + * processing omap tag structures + * + * Copyright (C) 2011 marcel@mesa.nl, Mesa Consulting B.V. + * Copyright (C) 2012 Pali Rohár <pali.rohar@gmail.com> + */ + +/* TI OMAP specific information */ +#define ATAG_BOARD 0x414f4d50 + +struct tag_omap_header { + u16 tag; + u16 size; +}; + +struct tag_omap { + struct tag_omap_header hdr; + union { + struct omap_clock_config clock; + struct omap_serial_console_config serial_console; + struct omap_sti_console_config sti_console; + struct omap_usb_config usb; + struct omap_lcd_config lcd; + struct omap_fbmem_config fbmem; + struct omap_gpio_switch_config gpio_switch; + struct omap_uart_config uart; + struct omap_tea5761_config tea5761; + struct omap_partition_config partition; + struct omap_flash_part_str_config flash_part_str; + struct omap_boot_reason_config boot_reason; + struct omap_version_config version; + struct omap_bluetooth_config bluetooth; + struct omap_wlan_cx3110x_config wlan_cx3110x; + struct omap_cbus_config cbus; + struct omap_em_asic_bb5_config em_asic_bb5; + } u; +}; + +#define tag_omap_next(t) ((struct tag_omap *)((u8 *)(t) + \ + (t)->hdr.size + sizeof(struct tag_omap_header))) + +#define OMAP_TAG_HEADER_CONFIG(config, type) \ + .hdr.tag = config, \ + .hdr.size = sizeof(struct type) + +#define OMAP_TAG_UART_CONFIG(p1) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_UART, omap_uart_config), \ + .u.uart.enabled_uarts = p1, \ + } + +#define OMAP_TAG_SERIAL_CONSOLE_CONFIG(p1, p2) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_SERIAL_CONSOLE, \ + omap_serial_console_config), \ + .u.serial_console.console_uart = p1, \ + .u.serial_console.console_speed = p2, \ + } + +#define OMAP_TAG_LCD_CONFIG(p1, p2, p3, p4) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_LCD, omap_lcd_config), \ + .u.lcd.panel_name = p1, \ + .u.lcd.ctrl_name = p2, \ + .u.lcd.nreset_gpio = p3, \ + .u.lcd.data_lines = p4, \ + } + +#define OMAP_TAG_GPIO_SWITCH_CONFIG(p1, p2, p3, p4, p5) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_GPIO_SWITCH, \ + omap_gpio_switch_config), \ + .u.gpio_switch.name = p1, \ + .u.gpio_switch.gpio = p2, \ + .u.gpio_switch.flags = p3, \ + .u.gpio_switch.type = p4, \ + .u.gpio_switch.key_code = p5, \ + } + +#define OMAP_TAG_WLAN_CX3110X_CONFIG(p1, p2, p3, p4, p5) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_WLAN_CX3110X, \ + omap_wlan_cx3110x_config), \ + .u.wlan_cx3110x.chip_type = p1, \ + .u.wlan_cx3110x.reserverd = p2, \ + .u.wlan_cx3110x.power_gpio = p3, \ + .u.wlan_cx3110x.irq_gpio = p4, \ + .u.wlan_cx3110x.spi_cs_gpio = p5, \ + } + +#define OMAP_TAG_PARTITION_CONFIG(p1, p2, p3, p4) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_PARTITION, \ + omap_partition_config), \ + .u.partition.name = p1, \ + .u.partition.size = p2, \ + .u.partition.offset = p3, \ + .u.partition.mask_flags = p4, \ + } + +#define OMAP_TAG_BOOT_REASON_CONFIG(p1) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_BOOT_REASON, \ + omap_boot_reason_config), \ + .u.boot_reason.reason_str = p1, \ + } + +#define OMAP_TAG_VERSION_STR_CONFIG(p1, p2) \ + { \ + OMAP_TAG_HEADER_CONFIG(OMAP_TAG_VERSION_STR, \ + omap_version_config), \ + .u.version.component = p1, \ + .u.version.version = p2, \ + } diff --git a/board/nvidia/common/Makefile b/board/nvidia/common/Makefile index a93d4583e7..f6f419e0ce 100644 --- a/board/nvidia/common/Makefile +++ b/board/nvidia/common/Makefile @@ -25,9 +25,7 @@ endif LIB = $(obj)lib$(VENDOR).o -COBJS-y += board.o -COBJS-$(CONFIG_SPI_UART_SWITCH) += uart-spi-switch.o -COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o +include common.mk COBJS := $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/nvidia/common/common.mk b/board/nvidia/common/common.mk new file mode 100644 index 0000000000..bd6202c299 --- /dev/null +++ b/board/nvidia/common/common.mk @@ -0,0 +1,4 @@ +# common options for all tegra boards +COBJS-y += ../../nvidia/common/board.o +COBJS-$(CONFIG_SPI_UART_SWITCH) += ../../nvidia/common/uart-spi-switch.o +COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += ../../nvidia/common/emc.o diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts index ca5facb7fe..5645a8d477 100644 --- a/board/nvidia/dts/tegra20-harmony.dts +++ b/board/nvidia/dts/tegra20-harmony.dts @@ -8,6 +8,7 @@ aliases { usb0 = "/usb@c5008000"; + usb1 = "/usb@c5004000"; }; memory { @@ -52,7 +53,7 @@ }; usb@c5004000 { - status = "disabled"; + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ }; nand-controller@70008000 { diff --git a/board/nvidia/dts/tegra20-whistler.dts b/board/nvidia/dts/tegra20-whistler.dts index 38599bd67d..f830cf3995 100644 --- a/board/nvidia/dts/tegra20-whistler.dts +++ b/board/nvidia/dts/tegra20-whistler.dts @@ -9,7 +9,6 @@ aliases { i2c0 = "/i2c@7000d000"; usb0 = "/usb@c5008000"; - usb1 = "/usb@c5000000"; }; memory { @@ -61,6 +60,10 @@ }; }; + usb@c5000000 { + status = "disabled"; + }; + usb@c5004000 { status = "disabled"; }; diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c index 32ed9bb7d1..c7590ac6cf 100644 --- a/board/nvidia/harmony/harmony.c +++ b/board/nvidia/harmony/harmony.c @@ -75,3 +75,12 @@ int board_mmc_init(bd_t *bd) return 0; } #endif + +void pin_mux_usb(void) +{ + funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI); + pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4); + pinmux_tristate_disable(PINGRP_CDEV2); + /* USB2 PHY reset GPIO */ + pinmux_tristate_disable(PINGRP_UAC); +} diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index 4e8a183b8b..c412c077da 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -26,6 +26,7 @@ #include <asm/arch/tegra.h> #include <asm/arch/clock.h> #include <asm/arch/funcmux.h> +#include <asm/arch/gpio.h> #include <asm/arch/pinmux.h> #include <asm/arch-tegra/mmc.h> #include <asm/gpio.h> @@ -34,24 +35,15 @@ #endif /* TODO: Remove this code when the SPI switch is working */ -#ifndef CONFIG_SPI_UART_SWITCH -/* - * Routine: gpio_config_uart_seaboard - * Description: Force GPIO_PI3 low on Seaboard so UART4 works. - */ -static void gpio_config_uart_seaboard(void) +#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA) +void gpio_early_init_uart(void) { /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */ +#ifndef CONFIG_SPL_BUILD gpio_request(GPIO_PI3, NULL); +#endif gpio_direction_output(GPIO_PI3, 0); } - -void gpio_early_init_uart(void) -{ - if (machine_is_ventana()) - return; - gpio_config_uart_seaboard(); -} #endif #ifdef CONFIG_TEGRA_MMC diff --git a/board/nx823/u-boot.lds b/board/nx823/u-boot.lds index fd4e8a50d5..c8d38942c9 100644 --- a/board/nx823/u-boot.lds +++ b/board/nx823/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/nx823/u-boot.lds.debug b/board/nx823/u-boot.lds.debug index c7711028ad..92796e6744 100644 --- a/board/nx823/u-boot.lds.debug +++ b/board/nx823/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/openrisc/openrisc-generic/u-boot.lds b/board/openrisc/openrisc-generic/u-boot.lds index 1aed197bb9..4cffacbd46 100644 --- a/board/openrisc/openrisc-generic/u-boot.lds +++ b/board/openrisc/openrisc-generic/u-boot.lds @@ -26,9 +26,11 @@ SECTIONS _endtext = .; } > ram - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } > ram - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } .rodata : { *(.rodata); diff --git a/board/palmtc/palmtc.c b/board/palmtc/palmtc.c index b23eec805e..590ca414aa 100644 --- a/board/palmtc/palmtc.c +++ b/board/palmtc/palmtc.c @@ -24,6 +24,7 @@ #include <serial.h> #include <asm/io.h> #include <asm/arch/pxa.h> +#include <asm/arch/regs-mmc.h> DECLARE_GLOBAL_DATA_PTR; @@ -51,6 +52,14 @@ int board_init(void) return 0; } +#ifdef CONFIG_CMD_MMC +int board_mmc_init(bd_t *bis) +{ + pxa_mmc_register(0); + return 0; +} +#endif + int dram_init(void) { pxa2xx_dram_init(); diff --git a/board/pb1x00/u-boot.lds b/board/pb1x00/u-boot.lds index bd0dee1efb..07ddd364a0 100644 --- a/board/pb1x00/u-boot.lds +++ b/board/pb1x00/u-boot.lds @@ -54,10 +54,9 @@ SECTIONS .sdata : { *(.sdata*) } - .u_boot_cmd : { - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> } uboot_end_data = .; diff --git a/board/pcippc2/fpga_serial.c b/board/pcippc2/fpga_serial.c index 5f89d9b125..de61ca0e56 100644 --- a/board/pcippc2/fpga_serial.c +++ b/board/pcippc2/fpga_serial.c @@ -73,13 +73,6 @@ void fpga_serial_putc (char c) } } -void fpga_serial_puts (const char *s) -{ - while (*s) { - fpga_serial_print (*s++); - } -} - int fpga_serial_getc (void) { while ((in8 (UART (LSR)) & 0x01) == 0); diff --git a/board/pcippc2/fpga_serial.h b/board/pcippc2/fpga_serial.h index 52750143c4..106fbf7a50 100644 --- a/board/pcippc2/fpga_serial.h +++ b/board/pcippc2/fpga_serial.h @@ -26,7 +26,6 @@ extern void fpga_serial_init (int); extern void fpga_serial_putc (char); -extern void fpga_serial_puts (const char *); extern int fpga_serial_getc (void); extern int fpga_serial_tstc (void); extern void fpga_serial_setbrg (void); diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c index 4a91458e8e..5e6fc58cf7 100644 --- a/board/pcippc2/pcippc2.c +++ b/board/pcippc2/pcippc2.c @@ -29,6 +29,7 @@ #include <watchdog.h> #include <pci.h> #include <netdev.h> +#include <serial.h> #include "hardware.h" #include "pcippc2.h" @@ -129,7 +130,7 @@ int misc_init_r (void) fpga_serial_init (sconsole_get_baudrate ()); sconsole_putc = fpga_serial_putc; - sconsole_puts = fpga_serial_puts; + sconsole_puts = default_serial_puts; sconsole_getc = fpga_serial_getc; sconsole_tstc = fpga_serial_tstc; sconsole_setbrg = fpga_serial_setbrg; diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index 746a54c5e3..f8345ddb46 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -32,6 +32,7 @@ #include <sha1.h> #include <asm/io.h> #include <net.h> +#include <ata.h> DECLARE_GLOBAL_DATA_PTR; @@ -672,7 +673,6 @@ U_BOOT_CMD( * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0) * These values are shifted */ -extern ulong *ide_bus_offset; void inline ide_outb(int dev, int port, unsigned char val) { debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", @@ -714,3 +714,58 @@ void ide_set_reset (int idereset) udelay (10000); } #endif /* defined (CONFIG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ + + +/* this is motly the same as it should, causing a little code duplication */ +#if defined(CONFIG_CMD_IDE) +#define EIEIO __asm__ volatile ("eieio") + +void ide_input_swap_data(int dev, ulong *sect_buf, int words) +{ + volatile ushort *pbuf = + (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); + ushort *dbuf = (ushort *) sect_buf; + + debug("in input swap data base for read is %lx\n", + (unsigned long) pbuf); + + while (words--) { + *dbuf++ = *pbuf; + *dbuf++ = *pbuf; + } +} + +void ide_output_data(int dev, const ulong *sect_buf, int words) +{ + ushort *dbuf; + volatile ushort *pbuf; + + pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); + dbuf = (ushort *) sect_buf; + while (words--) { + EIEIO; + *pbuf = ld_le16(dbuf++); + EIEIO; + *pbuf = ld_le16(dbuf++); + } +} + +void ide_input_data(int dev, ulong *sect_buf, int words) +{ + ushort *dbuf; + volatile ushort *pbuf; + + pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); + dbuf = (ushort *) sect_buf; + + debug("in input data base for read is %lx\n", (unsigned long) pbuf); + + while (words--) { + EIEIO; + *dbuf++ = ld_le16(pbuf); + EIEIO; + *dbuf++ = ld_le16(pbuf); + } +} + +#endif diff --git a/board/prodrive/p3mx/serial.c b/board/prodrive/p3mx/serial.c index 2f4d294b9d..3536933c00 100644 --- a/board/prodrive/p3mx/serial.c +++ b/board/prodrive/p3mx/serial.c @@ -75,21 +75,13 @@ static void p3mx_serial_setbrg(void) galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate); } - -static void p3mx_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device p3mx_serial_drv = { .name = "p3mx_serial", .start = p3mx_serial_init, .stop = NULL, .setbrg = p3mx_serial_setbrg, .putc = p3mx_serial_putc, - .puts = p3mx_serial_puts, + .puts = default_serial_puts, .getc = p3mx_serial_getc, .tstc = p3mx_serial_tstc, }; diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c index 877e8d9b2a..9931efdc08 100644 --- a/board/pxa255_idp/pxa_idp.c +++ b/board/pxa255_idp/pxa_idp.c @@ -35,6 +35,7 @@ #include <command.h> #include <asm/io.h> #include <asm/arch/pxa.h> +#include <asm/arch/regs-mmc.h> DECLARE_GLOBAL_DATA_PTR; @@ -77,6 +78,14 @@ int board_init (void) return 0; } +#ifdef CONFIG_CMD_MMC +int board_mmc_init(bd_t *bis) +{ + pxa_mmc_register(0); + return 0; +} +#endif + int board_late_init(void) { setenv("stdout", "serial"); diff --git a/board/qemu-mips/config.mk b/board/qemu-mips/config.mk deleted file mode 100644 index 27cd34ac36..0000000000 --- a/board/qemu-mips/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# Qemu -M mips system emulator -# See http://fabrice.bellard.free.fr/qemu -# - -# ROM version -CONFIG_SYS_TEXT_BASE = 0xbfc00000 - -# RAM version -#CONFIG_SYS_TEXT_BASE = 0x80001000 diff --git a/board/qemu-mips/u-boot.lds b/board/qemu-mips/u-boot.lds index 9460b2010c..cb2356f731 100644 --- a/board/qemu-mips/u-boot.lds +++ b/board/qemu-mips/u-boot.lds @@ -24,7 +24,11 @@ /* OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips") */ +#if defined(CONFIG_64BIT) +OUTPUT_FORMAT("elf64-tradbigmips", "elf64-tradbigmips", "elf64-tradlittlemips") +#else OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips") +#endif OUTPUT_ARCH(mips) ENTRY(_start) SECTIONS @@ -55,15 +59,17 @@ SECTIONS . = ALIGN(4); .sdata : { *(.sdata*) } - . = .; - .u_boot_cmd : { - __u_boot_cmd_start = .; - *(.u_boot_cmd) - __u_boot_cmd_end = .; + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> } uboot_end_data = .; +#if defined(CONFIG_64BIT) + num_got_entries = (__got_end - __got_start) >> 3; +#else num_got_entries = (__got_end - __got_start) >> 2; +#endif . = ALIGN(4); .sbss : { *(.sbss*) } diff --git a/board/qi/qi_lb60/u-boot.lds b/board/qi/qi_lb60/u-boot.lds index 7317652569..b3cb869748 100644 --- a/board/qi/qi_lb60/u-boot.lds +++ b/board/qi/qi_lb60/u-boot.lds @@ -47,9 +47,11 @@ SECTIONS .sdata : { *(.sdata*) } - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } uboot_end_data = .; num_got_entries = (__got_end - __got_start) >> 2; diff --git a/board/quantum/u-boot.lds b/board/quantum/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/quantum/u-boot.lds +++ b/board/quantum/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/r360mpi/u-boot.lds b/board/r360mpi/u-boot.lds index 2fa085a3d9..3ef0d9e0b7 100644 --- a/board/r360mpi/u-boot.lds +++ b/board/r360mpi/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/rbc823/u-boot.lds b/board/rbc823/u-boot.lds index d943fb6de7..a86b568f6e 100644 --- a/board/rbc823/u-boot.lds +++ b/board/rbc823/u-boot.lds @@ -77,9 +77,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; __start___ex_table = .; diff --git a/board/renesas/sh7757lcr/u-boot.lds b/board/renesas/sh7757lcr/u-boot.lds index 38ebe88507..cf406ce966 100644 --- a/board/renesas/sh7757lcr/u-boot.lds +++ b/board/renesas/sh7757lcr/u-boot.lds @@ -77,13 +77,10 @@ SECTIONS } PROVIDE (_egot = .); - PROVIDE (__u_boot_cmd_start = .); - .u_boot_cmd : - { - *(.u_boot_cmd) - . = ALIGN(4); + + .u_boot_list : { + #include <u-boot.lst> } - PROVIDE (__u_boot_cmd_end = .); PROVIDE (reloc_dst_end = .); /* _reloc_dst_end = .; */ diff --git a/board/rsdproto/u-boot.lds b/board/rsdproto/u-boot.lds index a729c52626..ff950294f3 100644 --- a/board/rsdproto/u-boot.lds +++ b/board/rsdproto/u-boot.lds @@ -97,9 +97,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S index 9283201201..9daa0da614 100644 --- a/board/samsung/origen/lowlevel_init.S +++ b/board/samsung/origen/lowlevel_init.S @@ -158,7 +158,22 @@ system_clock_init: ldr r2, =CLK_SRC_PERIL0_OFFSET str r1, [r0, r2] - /* FIMD0 */ + /* CAM , FIMC 0-3 */ + ldr r1, =CLK_SRC_CAM_VAL + ldr r2, =CLK_SRC_CAM_OFFSET + str r1, [r0, r2] + + /* MFC */ + ldr r1, =CLK_SRC_MFC_VAL + ldr r2, =CLK_SRC_MFC_OFFSET + str r1, [r0, r2] + + /* G3D */ + ldr r1, =CLK_SRC_G3D_VAL + ldr r2, =CLK_SRC_G3D_OFFSET + str r1, [r0, r2] + + /* LCD0 */ ldr r1, =CLK_SRC_LCD0_VAL ldr r2, =CLK_SRC_LCD0_OFFSET str r1, [r0, r2] @@ -223,6 +238,26 @@ system_clock_init: ldr r2, =CLK_DIV_PERIL0_OFFSET str r1, [r0, r2] + /* CAM, FIMC 0-3: CAM Clock Divisors */ + ldr r1, =CLK_DIV_CAM_VAL + ldr r2, =CLK_DIV_CAM_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_MFC: MFC Clock Divisors */ + ldr r1, =CLK_DIV_MFC_VAL + ldr r2, =CLK_DIV_MFC_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_G3D: G3D Clock Divisors */ + ldr r1, =CLK_DIV_G3D_VAL + ldr r2, =CLK_DIV_G3D_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_LCD0: LCD0 Clock Divisors */ + ldr r1, =CLK_DIV_LCD0_VAL + ldr r2, =CLK_DIV_LCD0_OFFSET + str r1, [r0, r2] + /* Set PLL locktime */ ldr r1, =PLL_LOCKTIME ldr r2, =APLL_LOCK_OFFSET diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h index 94cccca52c..930b948505 100644 --- a/board/samsung/origen/origen_setup.h +++ b/board/samsung/origen/origen_setup.h @@ -53,7 +53,18 @@ #define CLK_DIV_FSYS2_OFFSET 0xC548 #define CLK_DIV_FSYS3_OFFSET 0xC54C +#define CLK_SRC_CAM_OFFSET 0xC220 +#define CLK_SRC_TV_OFFSET 0xC224 +#define CLK_SRC_MFC_OFFSET 0xC228 +#define CLK_SRC_G3D_OFFSET 0xC22C +#define CLK_SRC_LCD0_OFFSET 0xC234 #define CLK_SRC_PERIL0_OFFSET 0xC250 + +#define CLK_DIV_CAM_OFFSET 0xC520 +#define CLK_DIV_TV_OFFSET 0xC524 +#define CLK_DIV_MFC_OFFSET 0xC528 +#define CLK_DIV_G3D_OFFSET 0xC52C +#define CLK_DIV_LCD0_OFFSET 0xC534 #define CLK_DIV_PERIL0_OFFSET 0xC550 #define CLK_SRC_LCD0_OFFSET 0xC234 @@ -353,6 +364,65 @@ | (UART1_RATIO << 4) \ | (UART0_RATIO << 0)) +/* Clock Source CAM/FIMC */ +/* CLK_SRC_CAM */ +#define CAM0_SEL_XUSBXTI 1 +#define CAM1_SEL_XUSBXTI 1 +#define CSIS0_SEL_XUSBXTI 1 +#define CSIS1_SEL_XUSBXTI 1 + +#define FIMC_SEL_SCLKMPLL 6 +#define FIMC0_LCLK_SEL FIMC_SEL_SCLKMPLL +#define FIMC1_LCLK_SEL FIMC_SEL_SCLKMPLL +#define FIMC2_LCLK_SEL FIMC_SEL_SCLKMPLL +#define FIMC3_LCLK_SEL FIMC_SEL_SCLKMPLL + +#define CLK_SRC_CAM_VAL ((CSIS1_SEL_XUSBXTI << 28) \ + | (CSIS0_SEL_XUSBXTI << 24) \ + | (CAM1_SEL_XUSBXTI << 20) \ + | (CAM0_SEL_XUSBXTI << 16) \ + | (FIMC3_LCLK_SEL << 12) \ + | (FIMC2_LCLK_SEL << 8) \ + | (FIMC1_LCLK_SEL << 4) \ + | (FIMC0_LCLK_SEL << 0)) + +/* SCLK CAM */ +/* CLK_DIV_CAM */ +#define FIMC0_LCLK_RATIO 4 +#define FIMC1_LCLK_RATIO 4 +#define FIMC2_LCLK_RATIO 4 +#define FIMC3_LCLK_RATIO 4 +#define CLK_DIV_CAM_VAL ((FIMC3_LCLK_RATIO << 12) \ + | (FIMC2_LCLK_RATIO << 8) \ + | (FIMC1_LCLK_RATIO << 4) \ + | (FIMC0_LCLK_RATIO << 0)) + +/* SCLK MFC */ +/* CLK_SRC_MFC */ +#define MFC_SEL_MPLL 0 +#define MOUTMFC_0 0 +#define MFC_SEL MOUTMFC_0 +#define MFC_0_SEL MFC_SEL_MPLL +#define CLK_SRC_MFC_VAL ((MFC_SEL << 8) | (MFC_0_SEL)) + + +/* CLK_DIV_MFC */ +#define MFC_RATIO 3 +#define CLK_DIV_MFC_VAL (MFC_RATIO) + +/* SCLK G3D */ +/* CLK_SRC_G3D */ +#define G3D_SEL_MPLL 0 +#define MOUTG3D_0 0 +#define G3D_SEL MOUTG3D_0 +#define G3D_0_SEL G3D_SEL_MPLL +#define CLK_SRC_G3D_VAL ((G3D_SEL << 8) | (G3D_0_SEL)) + +/* CLK_DIV_G3D */ +#define G3D_RATIO 1 +#define CLK_DIV_G3D_VAL (G3D_RATIO) + +/* SCLK LCD0 */ /* CLK_SRC_LCD0 */ #define FIMD_SEL_SCLKMPLL 6 #define MDNIE0_SEL_XUSBXTI 1 @@ -363,6 +433,10 @@ | (MDNIE0_SEL_XUSBXTI << 4) \ | (FIMD_SEL_SCLKMPLL << 0)) +/* CLK_DIV_LCD0 */ +#define FIMD0_RATIO 4 +#define CLK_DIV_LCD0_VAL (FIMD0_RATIO) + /* Required period to generate a stable clock output */ /* PLL_LOCK_TIME */ #define PLL_LOCKTIME 0x1C20 diff --git a/board/samsung/smdk5250/smdk5250-uboot-spl.lds b/board/samsung/smdk5250/smdk5250-uboot-spl.lds index d78dd77efd..951d8cec1d 100644 --- a/board/samsung/smdk5250/smdk5250-uboot-spl.lds +++ b/board/samsung/smdk5250/smdk5250-uboot-spl.lds @@ -48,6 +48,11 @@ SECTIONS .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } >.sram + . = ALIGN(4); + /* Align .machine_param on 256 byte boundary for easier searching */ .machine_param ALIGN(0x100) : { *(.machine_param) } >.sram . = ALIGN(4); diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds index f1628152d3..fbb442a02b 100644 --- a/board/samsung/smdk6400/u-boot-nand.lds +++ b/board/samsung/smdk6400/u-boot-nand.lds @@ -47,11 +47,13 @@ SECTIONS . = ALIGN(4); .got : { *(.got) } - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - . = ALIGN(4); + . = align(4); + .u_boot_list : { + #include <u-boot.lst> + } + + . = align(4); .mmudata : { *(.mmudata) } . = ALIGN(4); diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug index 31746e3adc..7a0757f146 100644 --- a/board/sandburst/karef/u-boot.lds.debug +++ b/board/sandburst/karef/u-boot.lds.debug @@ -115,9 +115,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug index 4922bd241e..07bd6fe19f 100644 --- a/board/sandburst/metrobox/u-boot.lds.debug +++ b/board/sandburst/metrobox/u-boot.lds.debug @@ -115,9 +115,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/sandpoint/u-boot.lds b/board/sandpoint/u-boot.lds index e382fd1a1e..ae3afa1130 100644 --- a/board/sandpoint/u-boot.lds +++ b/board/sandpoint/u-boot.lds @@ -68,9 +68,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/sbc8560/README b/board/sbc8560/README deleted file mode 100644 index c4b642236e..0000000000 --- a/board/sbc8560/README +++ /dev/null @@ -1,57 +0,0 @@ -The port was tested on Wind River System Sbc8560 board -<www.windriver.com>. U-Boot was installed on the flash memory of the -CPU card (no the SODIMM). - -NOTE: Please configure uboot compile to the proper PCI frequency and -setup the appropriate DIP switch settings. - -SBC8560 board: - -Make sure boards switches are set to their appropriate conditions. -Refer to the Engineering Reference Guide ERG-00300-002. Of particular -importance are: 1) the settings for JP4 (JP4 1-3 and 2-4), which -select the on-board FLASH device (Intel 28F128Jx); 2) The settings -for the Clock SW9 (33 MHz or 66 MHz). - - Note: SW9 Settings: 66 MHz - 4:1 ratio CCB clocks:SYSCLK - 3:1 ration e500 Core:CCB - pos1 - on, pos2 - on, pos3 - off, pos4 - on, pos5 - off, pos6 - on - Note: SW9 Settings: 33 MHz - 8:1 ratio CCB clocks:SYSCLK - 3:1 ration e500 Core:CCB - pos1 - on, pos2 - on, pos3 - on, pos4 - off, pos5 - off, pos6 - on - - -Flashing the FLASH device with the "Wind River ICE": - -1) Properly connect and configure the Wind River ICE to the target - JTAG port. This includes running the SBC8560 register script. Make - sure target memory can be read and written. - -2) Build the u-boot image: - make distclean - make SBC8560_66_config or SBC8560_33_config - make CROSS_COMPILE=.../ELDK3.0/ppc_8xx-/ all - - Note: reference is made to the ELDK3.0 compiler. Further, it seems - the ppc_8xx compiler is required for the 85xx (no 85xx - designated compiler in ELDK3.0) - -3) Convert the uboot (.elf) file to a uboot.bin file (using - visionClick converter). The bin file should be converted from - fffc0000 to ffffffff - -4) Setup the Flash Utility (tools menu) for: - - Do a "dc clr" [visionClick] to load the default register settings - Determine the clock speed of the PCI bus and set SW9 accordingly - Note: the speed of the PCI bus defaults to the slowest PCI card - PlayBack the "default" register file for the SBC8560 - Select the uboot.bin file with zero bias - Select the initialize Target prior to programming - Select the V28F640Jx (8192 x 8) 1 device FLASH Algorithm - Select the erase base address from FFFC0000 to FFFFFFFF - Select the start address from 0 with size of 4000 - -5) Erase and Program diff --git a/board/sbc8560/ddr.c b/board/sbc8560/ddr.c deleted file mode 100644 index e9babc6477..0000000000 --- a/board/sbc8560/ddr.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include <common.h> - -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - /* - * Factors to consider for CPO: - * - frequency - * - ddr1 vs. ddr2 - */ - popts->cpo_override = 0; - - /* - * Factors to consider for write data delay: - * - number of DIMMs - * - * 1 = 1/4 clock delay - * 2 = 1/2 clock delay - * 3 = 3/4 clock delay - * 4 = 1 clock delay - * 5 = 5/4 clock delay - * 6 = 3/2 clock delay - */ - popts->write_data_delay = 3; - - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; -} diff --git a/board/sbc8560/law.c b/board/sbc8560/law.c deleted file mode 100644 index 4e6baed2f4..0000000000 --- a/board/sbc8560/law.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -/* LAW(Local Access Window) configuration: - * 0000_0000-0800_0000: DDR(512M) -or- larger - * c000_0000-cfff_ffff: PCI(256M) - * d000_0000-dfff_ffff: RapidIO(256M) - * e000_0000-ffff_ffff: localbus(512M) - * e000_0000-e3ff_ffff: LBC 64M, 32-bit flash on CS6 - * e400_0000-e7ff_ffff: LBC 64M, 32-bit flash on CS1 - * e800_0000-efff_ffff: LBC 128M, nothing here - * f000_0000-f3ff_ffff: LBC 64M, SDRAM on CS3 - * f400_0000-f7ff_ffff: LBC 64M, SDRAM on CS4 - * f800_0000-fdff_ffff: LBC 64M, nothing here - * fc00_0000-fcff_ffff: LBC 16M, CSR,RTC,UART,etc on CS5 - * fd00_0000-fdff_ffff: LBC 16M, nothing here - * fe00_0000-feff_ffff: LBC 16M, nothing here - * ff00_0000-ff6f_ffff: LBC 7M, nothing here - * ff70_0000-ff7f_ffff: CCSRBAR 1M - * ff80_0000-ffff_ffff: LBC 8M, 8-bit flash on CS0 - * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access - * Window. - * Note: If flash is 8M at default position(last 8M),no LAW needed. - */ - -struct law_entry law_table[] = { -#ifndef CONFIG_SPD_EEPROM - SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR), -#endif - SET_LAW(CONFIG_SYS_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI), - SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c deleted file mode 100644 index 98bc7df4c8..0000000000 --- a/board/sbc8560/sbc8560.c +++ /dev/null @@ -1,369 +0,0 @@ -/* - * (C) Copyright 2003,Motorola Inc. - * Xianghua Xiao, (X.Xiao@motorola.com) - * - * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> - * - * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>. - * Added support for Wind River SBC8560 board - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <common.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_ddr_sdram.h> -#include <ioports.h> -#include <spd_sdram.h> -#include <miiphy.h> -#include <libfdt.h> -#include <fdt_support.h> - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */ - /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */ - /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */ - /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */ - /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */ - /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */ - /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */ - /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */ - /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */ - /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */ - /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */ - /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */ - /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */ - /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */ - /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */ - /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */ - /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */ - /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */ - /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */ - /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */ - /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */ - /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */ - /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */ - /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */ - /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */ - /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */ - /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */ - /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */ - /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */ - /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */ - /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */ - /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */ - }, - - /* Port B configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */ - /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */ - /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */ - /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */ - /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */ - /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */ - /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */ - /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */ - /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */ - /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */ - /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */ - /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */ - /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */ - /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */ - /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */ - /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */ - /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */ - /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */ - /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */ - /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */ - /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */ - /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - }, - - /* Port C */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */ - /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */ - /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */ - /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */ - /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */ - /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */ - /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */ - /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */ - /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */ - /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */ - /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */ - /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */ - /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */ - /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */ - /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */ - /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */ - /* PC15 */ { 1, 1, 0, 0, 0, 0 }, /* PC15 */ - /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */ - /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */ - /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */ - /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */ - /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */ - /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */ - /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */ - /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */ - /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */ - /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */ - /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */ - /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */ - /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */ - /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */ - /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */ - }, - - /* Port D */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ - /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ - /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 RTS */ - /* PD28 */ { 1, 1, 0, 0, 0, 0 }, /* SCC2 RxD */ - /* PD27 */ { 1, 1, 1, 1, 0, 0 }, /* SCC2 TxD */ - /* PD26 */ { 1, 1, 0, 1, 0, 0 }, /* SCC2 RTS */ - /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */ - /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */ - /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */ - /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */ - /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */ - /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */ - /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */ - /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */ - /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */ - /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */ - /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 0, 0, 0, 1, 0, 0 }, /* LED */ - /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */ - /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */ - /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */ - /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */ - /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ - /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ - /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */ - /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */ - /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */ - /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - } -}; - -int board_early_init_f (void) -{ -#if defined(CONFIG_PCI) - volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR); - - pci->peer &= 0xfffffffdf; /* disable master abort */ -#endif - return 0; -} - -void reset_phy (void) -{ -#if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */ - volatile unsigned char *bcsr = (unsigned char *) CONFIG_SYS_BCSR; -#endif - /* reset Giga bit Ethernet port if needed here */ - - /* reset the CPM FEC port */ -#if (CONFIG_ETHER_INDEX == 2) - bcsr[0] &= ~0x20; - udelay(2); - bcsr[0] |= 0x20; - udelay(1000); -#elif (CONFIG_ETHER_INDEX == 3) - bcsr[0] &= ~0x10; - udelay(2); - bcsr[0] |= 0x10; - udelay(1000); -#endif -#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC) - /* reset PHY */ - miiphy_reset("FCC1", 0x0); - - /* change PHY address to 0x02 */ - bb_miiphy_write(NULL, 0, MII_MIPSCR, 0xf028); - - bb_miiphy_write(NULL, 0x02, MII_BMCR, - BMCR_ANENABLE | BMCR_ANRESTART); -#endif /* CONFIG_MII */ -} - -int checkboard (void) -{ - sys_info_t sysinfo; - char buf[32]; - - get_sys_info (&sysinfo); - -#ifdef CONFIG_SBC8560 - printf ("Board: Wind River SBC8560 Board\n"); -#else - printf ("Board: Wind River SBC8540 Board\n"); -#endif - printf ("\tCPU: %s MHz\n", strmhz(buf, sysinfo.freqProcessor[0])); - printf ("\tCCB: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus)); - printf ("\tDDR: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus/2)); - if((CONFIG_SYS_LBC_LCRR & 0x0f) == 2 || (CONFIG_SYS_LBC_LCRR & 0x0f) == 4 \ - || (CONFIG_SYS_LBC_LCRR & 0x0f) == 8) { - printf ("\tLBC: %s MHz\n", - strmhz(buf, sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f))); - } else { - printf("\tLBC: unknown\n"); - } - printf("\tCPM: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus)); - printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n"); - return (0); -} - - -#if defined(CONFIG_SYS_DRAM_TEST) -int testdram (void) -{ - uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; - uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; - uint *p; - - printf("SDRAM test phase 1:\n"); - for (p = pstart; p < pend; p++) - *p = 0xaaaaaaaa; - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("SDRAM test phase 2:\n"); - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("SDRAM test passed.\n"); - return 0; -} -#endif - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - ************************************************************************/ -phys_size_t fixed_sdram(void) -{ - -#define CONFIG_SYS_DDR_CONTROL 0xc2000000 - - #ifndef CONFIG_SYS_RAMBOOT - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); - -#if (CONFIG_SYS_SDRAM_SIZE == 512) - ddr->cs0_bnds = 0x0000000f; -#else - ddr->cs0_bnds = 0x00000007; -#endif - ddr->cs1_bnds = 0x0010001f; - ddr->cs2_bnds = 0x00000000; - ddr->cs3_bnds = 0x00000000; - ddr->cs0_config = 0x80000102; - ddr->cs1_config = 0x80000102; - ddr->cs2_config = 0x00000000; - ddr->cs3_config = 0x00000000; - ddr->timing_cfg_1 = 0x37334321; - ddr->timing_cfg_2 = 0x00000800; - ddr->sdram_cfg = 0x42000000; - ddr->sdram_mode = 0x00000022; - ddr->sdram_interval = 0x05200100; - ddr->err_sbe = 0x00ff0000; - #if defined (CONFIG_DDR_ECC) - ddr->err_disable = 0x0000000D; - #endif - asm("sync;isync;msync"); - udelay(500); - #if defined (CONFIG_DDR_ECC) - /* Enable ECC checking */ - ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000); - #else - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; - #endif - asm("sync; isync; msync"); - udelay(500); - #endif - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - - -#if defined(CONFIG_OF_BOARD_SETUP) -void -ft_board_setup(void *blob, bd_t *bd) -{ - int node; -#ifdef CONFIG_PCI - const char *path; -#endif - - ft_cpu_setup(blob, bd); - - node = fdt_path_offset(blob, "/aliases"); - if (node >= 0) { -#ifdef CONFIG_PCI - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - tmp[1] = hose.last_busno - hose.first_busno; - do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); - } -#endif - } -} -#endif diff --git a/board/sbc8560/tlb.c b/board/sbc8560/tlb.c deleted file mode 100644 index fe0ac763af..0000000000 --- a/board/sbc8560/tlb.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { -/* TLB for CCSRBAR (IMMR) */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - -/* TLB for Local Bus stuff, just map the whole 512M */ -/* note that the LBC SDRAM is cache-inhibit and guarded, like everything else */ - - SET_TLB_ENTRY(1, 0xe0000000, 0xe0000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY(1, 0xf0000000, 0xf0000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_256M, 1), - -#if !defined(CONFIG_SPD_EEPROM) - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 4, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 5, BOOKE_PAGESZ_256M, 1), -#endif - - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 6, BOOKE_PAGESZ_16K, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_PCI_MEM_PHYS, CONFIG_SYS_PCI_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_256M, 1), -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/siemens/IAD210/IAD210.c b/board/siemens/IAD210/IAD210.c deleted file mode 100644 index 7325a93647..0000000000 --- a/board/siemens/IAD210/IAD210.c +++ /dev/null @@ -1,299 +0,0 @@ -/* - * (C) Copyright 2001 - * Paul Geerinckx - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> -#include <net.h> -#include "atm.h" -#include <i2c.h> - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); - -/* ------------------------------------------------------------------------- */ - -/* used PLD registers */ -# define PLD_GCR1_REG (unsigned char *) (0x10000000 + 0) -# define PLD_EXT_RES (unsigned char *) (0x10000000 + 10) -# define PLD_EXT_FETH (unsigned char *) (0x10000000 + 11) -# define PLD_EXT_LED (unsigned char *) (0x10000000 + 12) -# define PLD_EXT_X21 (unsigned char *) (0x10000000 + 13) - -#define _NOT_USED_ 0xFFFFFFFF - -const uint sdram_table[] = { - /* - * Single Read. (Offset 0 in UPMA RAM) - */ - 0xFE2DB004, 0xF0AA7004, 0xF0A5F400, 0xF3AFFC47, /* last */ - _NOT_USED_, - /* - * SDRAM Initialization (offset 5 in UPMA RAM) - * - * This is no UPM entry point. The following definition uses - * the remaining space to establish an initialization - * sequence, which is executed by a RUN command. - * - */ - 0xFFFAF834, 0xFFE5B435, /* last */ - _NOT_USED_, - /* - * Burst Read. (Offset 8 in UPMA RAM) - */ - 0xFE2DB004, 0xF0AF7404, 0xF0AFFC00, 0xF0AFFC00, - 0xF0AFFC00, 0xF0AAF800, 0xF1A5E447, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Single Write. (Offset 18 in UPMA RAM) - */ - 0xFE29B300, 0xF1A27304, 0xFFA5F747, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Burst Write. (Offset 20 in UPMA RAM) - */ - 0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00, - 0xF1AAF804, 0xFFA5F447, /* last */ - _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Refresh (Offset 30 in UPMA RAM) - */ - 0xFFAC3884, 0xFFAC3404, 0xFFAFFC04, 0xFFAFFC84, - 0xFFAFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * MRS sequence (Offset 38 in UPMA RAM) - */ - 0xFFAAB834, 0xFFA57434, 0xFFAFFC05, /* last */ - _NOT_USED_, - /* - * Exception. (Offset 3c in UPMA RAM) - */ - 0xFFAFFC04, 0xFFAFFC05, /* last */ - _NOT_USED_, _NOT_USED_, -}; - -/* ------------------------------------------------------------------------- */ - - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile iop8xx_t *iop = &immap->im_ioport; - volatile fec_t *fecp = &immap->im_cpm.cp_fec; - long int size; - - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - /* - * Preliminary prescaler for refresh (depends on number of - * banks): This value is selected for four cycles every 62.4 us - * with two SDRAM banks or four cycles every 31.2 us with one - * bank. It will be adjusted after memory sizing. - */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - - memctl->memc_mar = 0x00000088; - - /* - * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at - * preliminary addresses - these have to be modified after the - * SDRAM size has been determined. - */ - memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; - memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; - - memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE)); /* no refresh yet */ - - udelay (200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */ - udelay (1); - memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */ - udelay (1); - - memctl->memc_mcr = 0x80004105; /* SDRAM precharge */ - udelay (1); - memctl->memc_mcr = 0x80004030; /* SDRAM 16x autorefresh */ - udelay (1); - memctl->memc_mcr = 0x80004138; /* SDRAM upload parameters */ - udelay (1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay (1000); - - /* - * Check Bank 0 Memory Size for re-configuration - * - */ - size = dram_size (CONFIG_SYS_MAMR, (long *) SDRAM_BASE_PRELIM, - SDRAM_MAX_SIZE); - - udelay (1000); - - - memctl->memc_mamr = CONFIG_SYS_MAMR; - udelay (1000); - - /* - * Final mapping - */ - memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR2_PRELIM; - memctl->memc_br2 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V); - - udelay (10000); - - /* prepare pin multiplexing for fast ethernet */ - - atmLoad (); - fecp->fec_ecntrl = 0x00000004; /* rev D3 pinmux SET */ - iop->iop_pdpar |= 0x0080; /* set pin as MII_clock */ - - - return (size); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size (base, maxsize)); -} - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - return (0); -} - -void board_serial_init (void) -{ - ; /* nothing to do here */ -} - -void board_ether_init (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile iop8xx_t *iop = &immap->im_ioport; - volatile fec_t *fecp = &immap->im_cpm.cp_fec; - - atmLoad (); - fecp->fec_ecntrl = 0x00000004; /* rev D3 pinmux SET */ - iop->iop_pdpar |= 0x0080; /* set pin as MII_clock */ -} - -int board_early_init_f (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile iop8xx_t *iop = &immap->im_ioport; - - /* configure the LED timing output pins - port A pin 4 */ - iop->iop_papar = 0x0800; - iop->iop_padir = 0x0800; - - /* start timer 2 for the 4hz LED blink rate */ - timers->cpmt_tmr2 = 0xff2c; /* 4HZ for 64MHz */ - timers->cpmt_trr2 = 0x000003d0; /* clk/16 , prescale=256 */ - timers->cpmt_tgcr = 0x00000810; /* run timer 2 */ - - /* chip select for PLD access */ - memctl->memc_br6 = 0x10000401; - memctl->memc_or6 = 0xFC000908; - - /* PLD initial values ( set LEDs, remove reset on LXT) */ - - *PLD_GCR1_REG = 0x06; - *PLD_EXT_RES = 0xC0; - *PLD_EXT_FETH = 0x40; - *PLD_EXT_LED = 0xFF; - *PLD_EXT_X21 = 0x04; - return 0; -} - -static void board_get_enetaddr(uchar *addr) -{ - int i; - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile cpm8xx_t *cpm = &immap->im_cpm; - unsigned int rccrtmp; - - char default_mac_addr[] = { 0x00, 0x08, 0x01, 0x02, 0x03, 0x04 }; - - for (i = 0; i < 6; i++) - addr[i] = default_mac_addr[i]; - - printf ("There is an error in the i2c driver .. /n"); - printf ("You need to fix it first....../n"); - - rccrtmp = cpm->cp_rccr; - cpm->cp_rccr |= 0x0020; - - i2c_reg_read (0xa0, 0); - printf ("seep = '-%c-%c-%c-%c-%c-%c-'\n", - i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0), - i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0), - i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0)); - - cpm->cp_rccr = rccrtmp; -} - -int misc_init_r(void) -{ - uchar enetaddr[6]; - - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { - board_get_enetaddr(enetaddr); - eth_setenv_enetaddr("ethaddr", enetaddr); - } - - return 0; -} diff --git a/board/siemens/IAD210/atm.c b/board/siemens/IAD210/atm.c deleted file mode 100644 index 40aad0ac26..0000000000 --- a/board/siemens/IAD210/atm.c +++ /dev/null @@ -1,652 +0,0 @@ -#include <common.h> -#include <mpc8xx.h> -#include <commproc.h> - -#include "atm.h" -#include <linux/stddef.h> - -#define SYNC __asm__("sync") -#define MY_ALIGN(p, a) ((char *)(((uint32)(p)+(a)-1) & ~((uint32)(a)-1))) - -#define FALSE 1 -#define TRUE 0 -#define OK 0 -#define ERROR -1 - -struct atm_connection_t g_conn[NUM_CONNECTIONS] = -{ - { NULL, 10, NULL, 10, NULL, NULL, NULL, NULL }, /* OAM */ -}; - -struct atm_driver_t g_atm = -{ - FALSE, /* loaded */ - FALSE, /* started */ - NULL, /* csram */ - 0, /* csram_size */ - NULL, /* am_top */ - NULL, /* ap_top */ - NULL, /* int_reload_ptr */ - NULL, /* int_serv_ptr */ - NULL, /* rbd_base_ptr */ - NULL, /* tbd_base_ptr */ - 0 /* linerate */ -}; - -char csram[1024]; /* more than enough for doing nothing*/ - -int atmLoad(void); -void atmUnload(void); -int atmMemInit(void); -void atmIntInit(void); -void atmApcInit(void); -void atmAmtInit(void); -void atmCpmInit(void); -void atmUtpInit(void); - -/***************************************************************************** - * - * FUNCTION NAME: atmLoad - * - * DESCRIPTION: Basic ATM initialization. - * - * PARAMETERS: none - * - * RETURNS: OK or ERROR - * - ****************************************************************************/ -int atmLoad() -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer; - volatile iop8xx_t *iop = &immap->im_ioport; - - timers->cpmt_tgcr &= 0x0FFF; SYNC; /* Disable Timer 4 */ - immap->im_cpm.cp_scc[3].scc_gsmrl = 0x0; SYNC; /* Disable SCC4 */ - iop->iop_pdpar &= 0x3FFF; SYNC; /* Disable SAR and UTOPIA */ - - if ( atmMemInit() != OK ) return ERROR; - - atmIntInit(); - atmApcInit(); - atmAmtInit(); - atmCpmInit(); - atmUtpInit(); - - g_atm.loaded = TRUE; - - return OK; -} - -/***************************************************************************** - * - * FUNCTION NAME: atmUnload - * - * DESCRIPTION: Disables ATM and UTOPIA. - * - * PARAMETERS: none - * - * RETURNS: void - * - ****************************************************************************/ -void atmUnload() -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer; - volatile iop8xx_t *iop = &immap->im_ioport; - - timers->cpmt_tgcr &= 0x0FFF; SYNC; /* Disable Timer 4 */ - immap->im_cpm.cp_scc[3].scc_gsmrl = 0x0; SYNC; /* Disable SCC4 */ - iop->iop_pdpar &= 0x3FFF; SYNC; /* Disable SAR and UTOPIA */ - g_atm.loaded = FALSE; -} - -/***************************************************************************** - * - * FUNCTION NAME: atmMemInit - * - * DESCRIPTION: - * - * The ATM driver uses the following resources: - * - * A. Memory in DPRAM to hold - * - * 1/ CT = Connection Table ( RCT & TCT ) - * 2/ TCTE = Transmit Connection Table Extension - * 3/ MPHYPT = Multi-PHY Pointing Table - * 4/ APCP = APC Parameter Table - * 5/ APCT_PRIO_1 = APC Table ( priority 1 for AAL1/2 ) - * 6/ APCT_PRIO_2 = APC Table ( priority 2 for VBR ) - * 7/ APCT_PRIO_3 = APC Table ( priority 3 for UBR ) - * 8/ TQ = Transmit Queue - * 9/ AM = Address Matching Table - * 10/ AP = Address Pointing Table - * - * B. Memory in cache safe RAM to hold - * - * 1/ INT = Interrupt Queue - * 2/ RBD = Receive Buffer Descriptors - * 3/ TBD = Transmit Buffer Descriptors - * - * This function - * 1. clears the ATM DPRAM area, - * 2. Allocates and clears cache safe memory, - * 3. Initializes 'g_conn'. - * - * PARAMETERS: none - * - * RETURNS: OK or ERROR - * - ****************************************************************************/ -int atmMemInit() -{ - int i; - unsigned immr = CONFIG_SYS_IMMR; - int total_num_rbd = 0; - int total_num_tbd = 0; - - memset((char *)CONFIG_SYS_IMMR + 0x2000 + ATM_DPRAM_BEGIN, 0x00, ATM_DPRAM_SIZE); - - g_atm.csram_size = NUM_INT_ENTRIES * SIZE_OF_INT_ENTRY; - - for ( i = 0; i < NUM_CONNECTIONS; ++i ) { - total_num_rbd += g_conn[i].num_rbd; - total_num_tbd += g_conn[i].num_tbd; - } - - g_atm.csram_size += total_num_rbd * SIZE_OF_RBD + total_num_tbd * SIZE_OF_TBD + 4; - - g_atm.csram = &csram[0]; - memset(&(g_atm.csram), 0x00, g_atm.csram_size); - - g_atm.int_reload_ptr = (uint32 *)MY_ALIGN(g_atm.csram, 4); - g_atm.rbd_base_ptr = (struct atm_bd_t *)(g_atm.int_reload_ptr + NUM_INT_ENTRIES); - g_atm.tbd_base_ptr = (struct atm_bd_t *)(g_atm.rbd_base_ptr + total_num_rbd); - - g_conn[0].rbd_ptr = g_atm.rbd_base_ptr; - g_conn[0].tbd_ptr = g_atm.tbd_base_ptr; - g_conn[0].ct_ptr = CT_PTR(immr); - g_conn[0].tcte_ptr = TCTE_PTR(immr); - - return OK; -} - -/***************************************************************************** - * - * FUNCTION NAME: atmIntInit - * - * DESCRIPTION: - * - * Initialization of the MPC860 ESAR Interrupt Queue. - * This function - * - clears all entries in the INT, - * - sets the WRAP bit of the last INT entry, - * - initializes the 'int_serv_ptr' attribuut of the AtmDriver structure - * to the first INT entry. - * - * PARAMETERS: none - * - * RETURNS: void - * - * REMARKS: - * - * - The INT resides in external cache safe memory. - * - The base address of the INT is stored in g_atm.int_reload_ptr. - * - The number of entries in the INT is given by NUM_INT_ENTRIES. - * - The INTBASE field in SAR Parameter RAM is set by atmCpmInit(). - * - ****************************************************************************/ -void atmIntInit() -{ - int i; - for ( i = 0; i < NUM_INT_ENTRIES - 1; ++i) g_atm.int_reload_ptr[i] = 0; - g_atm.int_reload_ptr[i] = INT_WRAP; - g_atm.int_serv_ptr = g_atm.int_reload_ptr; -} - -/***************************************************************************** - * - * FUNCTION NAME: atmApcInit - * - * DESCRIPTION: - * - * This function initializes the following ATM Pace Controller related - * data structures: - * - * - 1 MPHY Pointing Table (contains only one entry) - * - 3 APC Parameter Tables (one PHY with 3 priorities) - * - 3 APC Tables (one table for each priority) - * - 1 Transmit Queue (one transmit queue per PHY) - * - * PARAMETERS: none - * - * RETURNS: void - * - ****************************************************************************/ -void atmApcInit() -{ - int i; - /* unsigned immr = CONFIG_SYS_IMMR; */ - uint16 * mphypt_ptr = MPHYPT_PTR(CONFIG_SYS_IMMR); - struct apc_params_t * apcp_ptr = APCP_PTR(CONFIG_SYS_IMMR); - uint16 * apct_prio1_ptr = APCT1_PTR(CONFIG_SYS_IMMR); - uint16 * tq_ptr = TQ_PTR(CONFIG_SYS_IMMR); - /***************************************************/ - /* Initialize MPHY Pointing Table (only one entry) */ - /***************************************************/ - *mphypt_ptr = APCP_BASE; - - /********************************************/ - /* Initialize APC parameters for priority 1 */ - /********************************************/ - apcp_ptr->apct_base1 = APCT_PRIO_1_BASE; - apcp_ptr->apct_end1 = APCT_PRIO_1_BASE + NUM_APCT_PRIO_1_ENTRIES * 2; - apcp_ptr->apct_ptr1 = APCT_PRIO_1_BASE; - apcp_ptr->apct_sptr1 = APCT_PRIO_1_BASE; - apcp_ptr->etqbase = TQ_BASE; - apcp_ptr->etqend = TQ_BASE + ( NUM_TQ_ENTRIES - 1 ) * 2; - apcp_ptr->etqaptr = TQ_BASE; - apcp_ptr->etqtptr = TQ_BASE; - apcp_ptr->apc_mi = 8; - apcp_ptr->ncits = 0x0100; /* NCITS = 1 */ - apcp_ptr->apcnt = 0; - apcp_ptr->reserved1 = 0; - apcp_ptr->eapcst = 0x2009; /* LAST, ESAR, MPHY */ - apcp_ptr->ptp_counter = 0; - apcp_ptr->ptp_txch = 0; - apcp_ptr->reserved2 = 0; - - - /***************************************************/ - /* Initialize APC Tables with empty slots (0xFFFF) */ - /***************************************************/ - for ( i = 0; i < NUM_APCT_PRIO_1_ENTRIES; ++i ) *(apct_prio1_ptr++) = 0xFFFF; - - /************************/ - /* Clear Transmit Queue */ - /************************/ - for ( i = 0; i < NUM_TQ_ENTRIES; ++i ) *(tq_ptr++) = 0; -} - -/***************************************************************************** - * - * FUNCTION NAME: atmAmtInit - * - * DESCRIPTION: - * - * This function clears the first entry in the Address Matching Table and - * lets the first entry in the Address Pointing table point to the first - * entry in the TCT table (i.e. the raw cell channel). - * - * PARAMETERS: none - * - * RETURNS: void - * - * REMARKS: - * - * The values for the AMBASE, AMEND and APBASE registers in SAR parameter - * RAM are initialized by atmCpmInit(). - * - ****************************************************************************/ -void atmAmtInit() -{ - unsigned immr = CONFIG_SYS_IMMR; - - g_atm.am_top = AM_PTR(immr); - g_atm.ap_top = AP_PTR(immr); - - *(g_atm.ap_top--) = CT_BASE; - *(g_atm.am_top--) = 0; -} - -/***************************************************************************** - * - * FUNCTION NAME: atmCpmInit - * - * DESCRIPTION: - * - * This function initializes the Utopia Interface Parameter RAM Map - * (SCC4, ATM Protocol) of the Communication Processor Modudule. - * - * PARAMETERS: none - * - * RETURNS: void - * - ****************************************************************************/ -void atmCpmInit() -{ - unsigned immr = CONFIG_SYS_IMMR; - - memset((char *)immr + 0x3F00, 0x00, 0xC0); - - /*-----------------------------------------------------------------*/ - /* RBDBASE - Receive buffer descriptors base address */ - /* The RBDs reside in cache safe external memory. */ - /*-----------------------------------------------------------------*/ - *RBDBASE(immr) = (uint32)g_atm.rbd_base_ptr; - - /*-----------------------------------------------------------------*/ - /* SRFCR - SAR receive function code */ - /* 0-2 rsvd = 000 */ - /* 3-4 BO = 11 Byte ordering (big endian). */ - /* 5-7 FC = 000 Value driven on the address type signals AT[1-3] */ - /* when the SDMA channel accesses memory. */ - /*-----------------------------------------------------------------*/ - *SRFCR(immr) = 0x18; - - /*-----------------------------------------------------------------*/ - /* SRSTATE - SAR receive status */ - /* 0 EXT = 0 Extended mode off. */ - /* 1 ACP = 0 Valid only if EXT = 1. */ - /* 2 EC = 0 Standard 53-byte ATM cell. */ - /* 3 SNC = 0 In sync. Must be set to 0 during initialization. */ - /* 4 ESAR = 1 Enhanced SAR functionality enabled. */ - /* 5 MCF = 1 Management Cell Filter active. */ - /* 6 SER = 0 UTOPIA mode. */ - /* 7 MPY = 1 Multiple PHY mode. */ - /*-----------------------------------------------------------------*/ - *SRSTATE(immr) = 0x0D; - - /*-----------------------------------------------------------------*/ - /* MRBLR - Maximum receive buffer length register. */ - /* Must be cleared for ATM operation (see also SMRBLR). */ - /*-----------------------------------------------------------------*/ - *MRBLR(immr) = 0; - - /*-----------------------------------------------------------------*/ - /* RSTATE - SCC internal receive state parameters */ - /* The first byte must be initialized with the value of SRFCR. */ - /*-----------------------------------------------------------------*/ - *RSTATE(immr) = (uint32)(*SRFCR(immr)) << 24; - - /*-----------------------------------------------------------------*/ - /* STFCR - SAR transmit function code */ - /* 0-2 rsvd = 000 */ - /* 3-4 BO = 11 Byte ordering (big endian). */ - /* 5-7 FC = 000 Value driven on the address type signals AT[1-3] */ - /* when the SDMA channel accesses memory. */ - /*-----------------------------------------------------------------*/ - *STFCR(immr) = 0x18; - - /*-----------------------------------------------------------------*/ - /* SRSTATE - SAR transmit status */ - /* 0 EXT = 0 : Extended mode off */ - /* 1 rsvd = 0 : */ - /* 2 EC = 0 : Standard 53-byte ATM cell */ - /* 3 rsvd = 0 : */ - /* 4 ESAR = 1 : Enhanced SAR functionality enabled */ - /* 5 rsvd = 0 : */ - /* 6 SER = 0 : UTOPIA mode */ - /* 7 MPY = 1 : Multiple PHY mode */ - /*-----------------------------------------------------------------*/ - *STSTATE(immr) = 0x09; - - /*-----------------------------------------------------------------*/ - /* TBDBASE - Transmit buffer descriptors base address */ - /* The TBDs reside in cache safe external memory. */ - /*-----------------------------------------------------------------*/ - *TBDBASE(immr) = (uint32)g_atm.tbd_base_ptr; - - /*-----------------------------------------------------------------*/ - /* TSTATE - SCC internal transmit state parameters */ - /* The first byte must be initialized with the value of STFCR. */ - /*-----------------------------------------------------------------*/ - *TSTATE(immr) = (uint32)(*STFCR(immr)) << 24; - - /*-----------------------------------------------------------------*/ - /* CTBASE - Connection table base address */ - /* Offset from the beginning of DPRAM (64-byte aligned). */ - /*-----------------------------------------------------------------*/ - *CTBASE(immr) = CT_BASE; - - /*-----------------------------------------------------------------*/ - /* INTBASE - Interrupt queue base pointer. */ - /* The interrupt queue resides in cache safe external memory. */ - /*-----------------------------------------------------------------*/ - *INTBASE(immr) = (uint32)g_atm.int_reload_ptr; - - /*-----------------------------------------------------------------*/ - /* INTPTR - Pointer into interrupt queue. */ - /* Initialize to INTBASE. */ - /*-----------------------------------------------------------------*/ - *INTPTR(immr) = *INTBASE(immr); - - /*-----------------------------------------------------------------*/ - /* C_MASK - Constant mask for CRC32 */ - /* Must be initialized to 0xDEBB20E3. */ - /*-----------------------------------------------------------------*/ - *C_MASK(immr) = 0xDEBB20E3; - - /*-----------------------------------------------------------------*/ - /* INT_ICNT - Interrupt threshold value */ - /*-----------------------------------------------------------------*/ - *INT_ICNT(immr) = 1; - - /*-----------------------------------------------------------------*/ - /* INT_CNT - Interrupt counter */ - /* Initalize to INT_ICNT. Decremented for each interrupt entry */ - /* reported in the interrupt queue. On zero an interrupt is */ - /* signaled to the host by setting the GINT bit in the event */ - /* register. The counter is reinitialized with INT_ICNT. */ - /*-----------------------------------------------------------------*/ - *INT_CNT(immr) = *INT_ICNT(immr); - - /*-----------------------------------------------------------------*/ - /* SMRBLR - SAR maximum receive buffer length register. */ - /* Must be a multiple of 48 bytes. Common for all ATM connections. */ - /*-----------------------------------------------------------------*/ - *SMRBLR(immr) = SAR_RXB_SIZE; - - /*-----------------------------------------------------------------*/ - /* APCST - APC status register. */ - /* 0 rsvd 0 */ - /* 1-2 CSER 11 Initialize with the same value as NSER. */ - /* 3-4 NSER 11 Next serial or UTOPIA channel. */ - /* 5-7 rsvd 000 */ - /* 8-10 rsvd 000 */ - /* 11 rsvd 0 */ - /* 12 ESAR 1 UTOPIA Level 2 MPHY enabled. */ - /* 13 DIS 0 APC disable. Must be initiazed to 0. */ - /* 14 PL2 0 Not used. */ - /* 15 MPY 1 Multiple PHY mode on. */ - /*-----------------------------------------------------------------*/ - *APCST(immr) = 0x7809; - - /*-----------------------------------------------------------------*/ - /* APCPTR - Pointer to the APC parameter table */ - /* In MPHY master mode this parameter points to the MPHY pointing */ - /* table. 2-byte aligned. */ - /*-----------------------------------------------------------------*/ - *APCPTR(immr) = MPHYPT_BASE; - - /*-----------------------------------------------------------------*/ - /* HMASK - Header mask */ - /* Each incoming cell is masked with HMASK before being compared */ - /* to the entries in the address matching table. */ - /*-----------------------------------------------------------------*/ - *HMASK(immr) = AM_HMASK; - - /*-----------------------------------------------------------------*/ - /* AMBASE - Address matching table base address */ - /*-----------------------------------------------------------------*/ - *AMBASE(immr) = AM_BASE; - - /*-----------------------------------------------------------------*/ - /* AMEND - Address matching table end address */ - /*-----------------------------------------------------------------*/ - *AMEND(immr) = AM_BASE; - - /*-----------------------------------------------------------------*/ - /* APBASE - Address pointing table base address */ - /*-----------------------------------------------------------------*/ - *APBASE(immr) = AP_BASE; - - /*-----------------------------------------------------------------*/ - /* MPHYST - MPHY status register */ - /* 0-1 rsvd 00 */ - /* 2-6 NMPHY 00000 1 PHY */ - /* 7-9 rsvd 000 */ - /* 10-14 CMPHY 00000 Initialize with same value as NMPHY */ - /*-----------------------------------------------------------------*/ - *MPHYST(immr) = 0x0000; - - /*-----------------------------------------------------------------*/ - /* TCTEBASE - Transmit connection table extension base address */ - /* Offset from the beginning of DPRAM (32-byte aligned). */ - /*-----------------------------------------------------------------*/ - *TCTEBASE(immr) = TCTE_BASE; - - /*-----------------------------------------------------------------*/ - /* Clear not used registers. */ - /*-----------------------------------------------------------------*/ -} - -/***************************************************************************** - * - * FUNCTION NAME: atmUtpInit - * - * DESCRIPTION: - * - * This function initializes the ATM interface for - * - * - UTOPIA mode - * - muxed bus - * - master operation - * - multi PHY (because of a bug in the MPC860P rev. E.0) - * - internal clock = SYSCLK / 2 - * - * EXTERNAL EFFECTS: - * - * After calling this function, the MPC860ESAR UTOPIA bus is - * active and uses the following ports/pins: - * - * Port Pin Signal Description - * ------ --- ------- ------------------------------------------- - * PB[15] R17 TxClav Transmit cell available input/output signal - * PC[15] D16 RxClav Receive cell available input/output signal - * PD[15] U17 UTPB[0] UTOPIA bus bit 0 input/output signal - * PD[14] V19 UTPB[1] UTOPIA bus bit 1 input/output signal - * PD[13] V18 UTPB[2] UTOPIA bus bit 2 input/output signal - * PD[12] R16 UTPB[3] UTOPIA bus bit 3 input/output signal - * PD[11] T16 RXENB Receive enable input/output signal - * PD[10] W18 TXENB Transmit enable input/output signal - * PD[9] V17 UTPCLK UTOPIA clock input/output signal - * PD[7] T15 UTPB[4] UTOPIA bus bit 4 input/output signal - * PD[6] V16 UTPB[5] UTOPIA bus bit 5 input/output signal - * PD[5] U15 UTPB[6] UTOPIA bus bit 6 input/output signal - * PD[4] U16 UTPB[7] UTOPIA bus bit 7 input/output signal - * PD[3] W16 SOC Start of cell input/output signal - * - * PARAMETERS: none - * - * RETURNS: void - * - * REMARK: - * - * The ATM parameters and data structures must be configured before - * initializing the UTOPIA port. The UTOPIA port activates immediately - * upon initialization, and if its associated data structures are not - * initialized, the CPM will lock up. - * - ****************************************************************************/ -void atmUtpInit() -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile iop8xx_t *iop = &immap->im_ioport; - volatile car8xx_t *car = &immap->im_clkrst; - volatile cpm8xx_t *cpm = &immap->im_cpm; - int flag; - - flag = disable_interrupts(); - - /*-----------------------------------------------------------------*/ - /* SCCR - System Clock Control Register */ - /* */ - /* The UTOPIA clock can be selected to be internal clock or */ - /* external clock (selected by the UTOPIA mode register). */ - /* In case of internal clock, the UTOPIA clock is derived from */ - /* the system frequency divided by two dividers. */ - /* Bits 27-31 of the SCCR register are defined to control the */ - /* UTOPIA clock. */ - /* */ - /* SCCR[27:29] DFUTP Division factor. Divide the system clock */ - /* by 2^DFUTP. */ - /* SCCR[30:31] DFAUTP Additional division factor. Divide the */ - /* system clock by the following value: */ - /* 00 = divide by 1 */ - /* 00 = divide by 3 */ - /* 10 = divide by 5 */ - /* 11 = divide by 7 */ - /* */ - /* Note that the UTOPIA clock must be programmed as to operate */ - /* within the range SYSCLK/10 .. 50MHz. */ - /*-----------------------------------------------------------------*/ - car->car_sccr &= 0xFFFFFFE0; - car->car_sccr |= 0x00000008; /* UTPCLK = SYSCLK / 4 */ - - /*-----------------------------------------------------------------*/ - /* RCCR - RISC Controller Configuration Register */ - /* */ - /* RCCR[8] DR1M IDMA Request 0 Mode */ - /* 0 = edge sensitive */ - /* 1 = level sensitive */ - /* RCCR[9] DR0M IDMA Request 0 Mode */ - /* 0 = edge sensitive */ - /* 1 = level sensitive */ - /* RCCR[10:11] DRQP IDMA Request Priority */ - /* 00 = IDMA req. have more prio. than SCCs */ - /* 01 = IDMA req. have less prio. then SCCs */ - /* 10 = IDMA requests have the lowest prio. */ - /* 11 = reserved */ - /* */ - /* The RCCR[DR0M] and RCCR[DR1M] bits must be set to enable UTOPIA */ - /* operation. Also, program RCCR[DPQP] to 01 to give SCC transfers */ - /* higher priority. */ - /*-----------------------------------------------------------------*/ - cpm->cp_rccr &= 0xFF0F; - cpm->cp_rccr |= 0x00D0; - - /*-----------------------------------------------------------------*/ - /* Port B - TxClav Signal */ - /*-----------------------------------------------------------------*/ - cpm->cp_pbpar |= 0x00010000; /* PBPAR[15] = 1 */ - cpm->cp_pbdir &= 0xFFFEFFFF; /* PBDIR[15] = 0 */ - - /*-----------------------------------------------------------------*/ - /* UTOPIA Mode Register */ - /* */ - /* - muxed bus (master operation only) */ - /* - multi PHY (because of a bug in the MPC860P rev.E.0) */ - /* - internal clock */ - /* - no loopback */ - /* - do no activate statistical counters */ - /*-----------------------------------------------------------------*/ - iop->utmode = 0x00000004; SYNC; - - /*-----------------------------------------------------------------*/ - /* Port D - UTOPIA Data and Control Signals */ - /* */ - /* 15-12 UTPB[0:3] UTOPIA bus bit 0 - 3 input/output signals */ - /* 11 RXENB UTOPIA receive enable input/output signal */ - /* 10 TXENB UTOPIA transmit enable input/output signal */ - /* 9 TUPCLK UTOPIA clock input/output signal */ - /* 8 MII-MDC Used by MII in simult. MII and UTOPIA operation */ - /* 7-4 UTPB[4:7] UTOPIA bus bit 4 - 7 input/output signals */ - /* 3 SOC UTOPIA Start of cell input/output signal */ - /* 2 Reserved */ - /* 1 Enable UTOPIA mode */ - /* 0 Enable SAR */ - /*-----------------------------------------------------------------*/ - iop->iop_pdpar |= 0xDF7F; SYNC; - iop->iop_pddir &= 0x2080; SYNC; - - /*-----------------------------------------------------------------*/ - /* Port C - RxClav Signal */ - /*-----------------------------------------------------------------*/ - iop->iop_pcpar |= 0x0001; /* PCPAR[15] = 1 */ - iop->iop_pcdir &= 0xFFFE; /* PCDIR[15] = 0 */ - iop->iop_pcso &= 0xFFFE; /* PCSO[15] = 0 */ - - if (flag) - enable_interrupts(); -} diff --git a/board/siemens/IAD210/atm.h b/board/siemens/IAD210/atm.h deleted file mode 100644 index cd5b45e869..0000000000 --- a/board/siemens/IAD210/atm.h +++ /dev/null @@ -1,287 +0,0 @@ -typedef unsigned char uint8; -typedef unsigned short uint16; -typedef unsigned int uint32; -typedef volatile unsigned char vuint8; -typedef volatile unsigned short vuint16; -typedef volatile unsigned int vuint32; - - -#define DPRAM_ATM CONFIG_SYS_IMMR + 0x3000 - -#define ATM_DPRAM_BEGIN (DPRAM_ATM - CONFIG_SYS_IMMR - 0x2000) -#define NUM_CONNECTIONS 1 -#define SAR_RXB_SIZE 1584 -#define AM_HMASK 0x0FFFFFF0 - -#define NUM_CT_ENTRIES (NUM_CONNECTIONS) -#define NUM_TCTE_ENTRIES (NUM_CONNECTIONS) -#define NUM_AM_ENTRIES (NUM_CONNECTIONS+1) -#define NUM_AP_ENTRIES (NUM_CONNECTIONS+1) -#define NUM_MPHYPT_ENTRIES 1 -#define NUM_APCP_ENTRIES 1 -#define NUM_APCT_PRIO_1_ENTRIES 146 /* Determines minimum rate */ -#define NUM_TQ_ENTRIES 12 - -#define SIZE_OF_CT_ENTRY 64 -#define SIZE_OF_TCTE_ENTRY 32 -#define SIZE_OF_AM_ENTRY 4 -#define SIZE_OF_AP_ENTRY 2 -#define SIZE_OF_MPHYPT_ENTRY 2 -#define SIZE_OF_APCP_ENTRY 32 -#define SIZE_OF_APCT_ENTRY 2 -#define SIZE_OF_TQ_ENTRY 2 - -#define CT_BASE ((ATM_DPRAM_BEGIN + 63) & 0xFFC0) /*64 */ -#define TCTE_BASE (CT_BASE + NUM_CT_ENTRIES * SIZE_OF_CT_ENTRY) /*32 */ -#define APCP_BASE (TCTE_BASE + NUM_TCTE_ENTRIES * SIZE_OF_TCTE_ENTRY) /*32 */ -#define AM_BEGIN (APCP_BASE + NUM_APCP_ENTRIES * SIZE_OF_APCP_ENTRY) /*4 */ -#define AM_BASE (AM_BEGIN + (NUM_AM_ENTRIES - 1) * SIZE_OF_AM_ENTRY) -#define AP_BEGIN (AM_BEGIN + NUM_AM_ENTRIES * SIZE_OF_AM_ENTRY) /*2 */ -#define AP_BASE (AP_BEGIN + (NUM_AP_ENTRIES - 1) * SIZE_OF_AP_ENTRY) -#define MPHYPT_BASE (AP_BEGIN + NUM_AP_ENTRIES * SIZE_OF_AP_ENTRY) /*2 */ -#define APCT_PRIO_1_BASE (MPHYPT_BASE + NUM_MPHYPT_ENTRIES * SIZE_OF_MPHYPT_ENTRY) /*2 */ -#define TQ_BASE (APCT_PRIO_1_BASE + NUM_APCT_PRIO_1_ENTRIES * SIZE_OF_APCT_ENTRY) /*2 */ -#define ATM_DPRAM_SIZE ((TQ_BASE + NUM_TQ_ENTRIES * SIZE_OF_TQ_ENTRY) - ATM_DPRAM_BEGIN) - -#define CT_PTR(base) ((struct ct_entry_t *)((char *)(base) + 0x2000 + CT_BASE)) -#define TCTE_PTR(base) ((struct tcte_entry_t *)((char *)(base) + 0x2000 + TCTE_BASE)) -#define AM_PTR(base) ((uint32 *)((char *)(base) + 0x2000 + AM_BASE)) -#define AP_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + AP_BASE)) -#define MPHYPT_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + MPHYPT_BASE)) -#define APCP_PTR(base) ((struct apc_params_t *)((char*)(base) + 0x2000 + APCP_BASE)) -#define APCT1_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_1_BASE)) -#define APCT2_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_2_BASE)) -#define APCT3_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_3_BASE)) -#define TQ_PTR(base) ((uint16 *)((char *)(base) + 0x2000 + TQ_BASE)) - -/* SAR registers */ -#define RBDBASE(base) ((vuint32 *)(base + 0x3F00)) /* Base address of RxBD-List */ -#define SRFCR(base) ((vuint8 *)(base + 0x3F04)) /* DMA Receive function code */ -#define SRSTATE(base) ((vuint8 *)(base + 0x3F05)) /* DMA Receive status */ -#define MRBLR(base) ((vuint16 *)(base + 0x3F06)) /* Init to 0 for ATM */ -#define RSTATE(base) ((vuint32 *)(base + 0x3F08)) /* Do not write to */ -#define R_CNT(base) ((vuint16 *)(base + 0x3F10)) /* Do not write to */ -#define STFCR(base) ((vuint8 *)(base + 0x3F12)) /* DMA Transmit function code */ -#define STSTATE(base) ((vuint8 *)(base + 0x3F13)) /* DMA Transmit status */ -#define TBDBASE(base) ((vuint32 *)(base + 0x3F14)) /* Base address of TxBD-List */ -#define TSTATE(base) ((vuint32 *)(base + 0x3F18)) /* Do not write to */ -#define COMM_CH(base) ((vuint16 *)(base + 0x3F1C)) /* Command channel */ -#define STCHNUM(base) ((vuint16 *)(base + 0x3F1E)) /* Do not write to */ -#define T_CNT(base) ((vuint16 *)(base + 0x3F20)) /* Do not write to */ -#define CTBASE(base) ((vuint16 *)(base + 0x3F22)) /* Base address of Connection-table */ -#define ECTBASE(base) ((vuint32 *)(base + 0x3F24)) /* Valid only for external Conn.-table */ -#define INTBASE(base) ((vuint32 *)(base + 0x3F28)) /* Base address of Interrupt-table */ -#define INTPTR(base) ((vuint32 *)(base + 0x3F2C)) /* Pointer to Interrupt-queue */ -#define C_MASK(base) ((vuint32 *)(base + 0x3F30)) /* CRC-mask */ -#define SRCHNUM(base) ((vuint16 *)(base + 0x3F34)) /* Do not write to */ -#define INT_CNT(base) ((vuint16 *)(base + 0x3F36)) /* Interrupt-Counter */ -#define INT_ICNT(base) ((vuint16 *)(base + 0x3F38)) /* Interrupt threshold */ -#define TSTA(base) ((vuint16 *)(base + 0x3F3A)) /* Time-stamp-address */ -#define OLDLEN(base) ((vuint16 *)(base + 0x3F3C)) /* Do not write to */ -#define SMRBLR(base) ((vuint16 *)(base + 0x3F3E)) /* SAR max RXBuffer length */ -#define EHEAD(base) ((vuint32 *)(base + 0x3F40)) /* Valid for serial mode */ -#define EPAYLOAD(base) ((vuint32 *)(base + 0x3F44)) /* Valid for serial mode */ -#define TQBASE(base) ((vuint16 *)(base + 0x3F48)) /* Base address of Tx queue */ -#define TQEND(base) ((vuint16 *)(base + 0x3F4A)) /* End address of Tx queue */ -#define TQAPTR(base) ((vuint16 *)(base + 0x3F4C)) /* TQ APC pointer */ -#define TQTPTR(base) ((vuint16 *)(base + 0x3F4E)) /* TQ Tx pointer */ -#define APCST(base) ((vuint16 *)(base + 0x3F50)) /* APC status */ -#define APCPTR(base) ((vuint16 *)(base + 0x3F52)) /* APC parameter pointer */ -#define HMASK(base) ((vuint32 *)(base + 0x3F54)) /* Header mask */ -#define AMBASE(base) ((vuint16 *)(base + 0x3F58)) /* Address match table base */ -#define AMEND(base) ((vuint16 *)(base + 0x3F5A)) /* Address match table end */ -#define APBASE(base) ((vuint16 *)(base + 0x3F5C)) /* Address match parameter */ -#define FLBASE(base) ((vuint32 *)(base + 0x3F54)) /* First-level table base */ -#define SLBASE(base) ((vuint32 *)(base + 0x3F58)) /* Second-level table base */ -#define FLMASK(base) ((vuint16 *)(base + 0x3F5C)) /* First-level mask */ -#define ECSIZE(base) ((vuint16 *)(base + 0x3F5E)) /* Valid for extended mode */ -#define APCT_REAL(base) ((vuint32 *)(base + 0x3F60)) /* APC 32 bit counter */ -#define R_PTR(base) ((vuint32 *)(base + 0x3F64)) /* Do not write to */ -#define RTEMP(base) ((vuint32 *)(base + 0x3F68)) /* Do not write to */ -#define T_PTR(base) ((vuint32 *)(base + 0x3F6C)) /* Do not write to */ -#define TTEMP(base) ((vuint32 *)(base + 0x3F70)) /* Do not write to */ - -/* ESAR registers */ -#define FMCTIMESTMP(base) ((vuint32 *)(base + 0x3F80)) /* Perf.Mon.Timestamp */ -#define FMCTEMPLATE(base) ((vuint32 *)(base + 0x3F84)) /* Perf.Mon.Template */ -#define PMPTR(base) ((vuint16 *)(base + 0x3F88)) /* Perf.Mon.Table */ -#define PMCHANNEL(base) ((vuint16 *)(base + 0x3F8A)) /* Perf.Mon.Channel */ -#define MPHYST(base) ((vuint16 *)(base + 0x3F90)) /* Multi-PHY Status */ -#define TCTEBASE(base) ((vuint16 *)(base + 0x3F92)) /* Internal TCT Extension Base */ -#define ETCTEBASE(base) ((vuint32 *)(base + 0x3F94)) /* External TCT Extension Base */ -#define COMM_CH2(base) ((vuint32 *)(base + 0x3F98)) /* 2nd command channel word */ -#define STATBASE(base) ((vuint16 *)(base + 0x3F9C)) /* Statistics table pointer */ - -/* UTOPIA Mode Register */ -#define UTMODE(base) (CAST(vuint32 *)(base + 0x0978)) - -/* SAR commands */ -#define TRANSMIT_CHANNEL_ACTIVATE_CMD 0x0FC1 -#define TRANSMIT_CHANNEL_DEACTIVATE_CMD 0x1FC1 -#define STOP_TRANSMIT_CMD 0x2FC1 -#define RESTART_TRANSMIT_CMD 0x3FC1 -#define STOP_RECEIVE_CMD 0x4FC1 -#define RESTART_RECEIVE_CMD 0x5FC1 -#define APC_BYPASS_CMD 0x6FC1 -#define MEM_WRITE_CMD 0x7FC1 -#define CPCR_FLG 0x0001 - -/* INT flags */ -#define INT_VALID 0x80000000 -#define INT_WRAP 0x40000000 -#define INT_APCO 0x00800000 -#define INT_TQF 0x00200000 -#define INT_RXF 0x00080000 -#define INT_BSY 0x00040000 -#define INT_TXB 0x00020000 -#define INT_RXB 0x00010000 - -#define NUM_INT_ENTRIES 80 -#define SIZE_OF_INT_ENTRY 4 - -struct apc_params_t { - vuint16 apct_base1; /* APC Table - First Priority Base pointer */ - vuint16 apct_end1; /* First APC Table - Length */ - vuint16 apct_ptr1; /* First APC Table Pointer */ - vuint16 apct_sptr1; /* APC Table First Priority Service pointer */ - vuint16 etqbase; /* Enhanced Transmit Queue Base pointer */ - vuint16 etqend; /* Enhanced Transmit Queue End pointer */ - vuint16 etqaptr; /* Enhanced Transmit Queue APC pointer */ - vuint16 etqtptr; /* Enhanced Transmit Queue Transmitter pointer */ - vuint16 apc_mi; /* APC - Max Iteration */ - vuint16 ncits; /* Number of Cells In TimeSlot */ - vuint16 apcnt; /* APC - N Timer */ - vuint16 reserved1; /* reserved */ - vuint16 eapcst; /* APC status */ - vuint16 ptp_counter; /* PTP queue length */ - vuint16 ptp_txch; /* PTP channel */ - vuint16 reserved2; /* reserved */ -}; - -struct ct_entry_t { - /* RCT */ - unsigned fhnt:1; - unsigned pm_rct:1; - unsigned reserved0:6; - unsigned hec:1; - unsigned clp:1; - unsigned cng_ncrc:1; - unsigned inf_rct:1; - unsigned cngi_ptp:1; - unsigned cdis_rct:1; - unsigned aal_rct:2; - uint16 rbalen; - uint32 rcrc; - uint32 rb_ptr; - uint16 rtmlen; - uint16 rbd_ptr; - uint16 rbase; - uint16 tstamp; - uint16 imask; - unsigned ft:2; - unsigned nim:1; - unsigned reserved1:2; - unsigned rpmt:6; - unsigned reserved2:5; - uint8 reserved3[8]; - /* TCT */ - unsigned reserved4:1; - unsigned pm_tct:1; - unsigned reserved5:6; - unsigned pc:1; - unsigned reserved6:2; - unsigned inf_tct:1; - unsigned cr10:1; - unsigned cdis_tct:1; - unsigned aal_tct:2; - uint16 tbalen; - uint32 tcrc; - uint32 tb_ptr; - uint16 ttmlen; - uint16 tbd_ptr; - uint16 tbase; - unsigned reserved7:5; - unsigned tpmt:6; - unsigned reserved8:3; - unsigned avcf:1; - unsigned act:1; - uint32 chead; - uint16 apcl; - uint16 apcpr; - unsigned out:1; - unsigned bnr:1; - unsigned tservice:2; - unsigned apcp:12; - uint16 apcpf; -}; - -struct tcte_entry_t { - unsigned res1:4; - unsigned scr:12; - uint16 scrf; - uint16 bt; - uint16 buptrh; - uint32 buptrl; - unsigned vbr2:1; - unsigned res2:15; - uint16 oobr; - uint16 res3[8]; -}; - -#define SIZE_OF_RBD 12 -#define SIZE_OF_TBD 12 - -struct atm_bd_t { - vuint16 flags; - vuint16 length; - unsigned char *buffer_ptr; - vuint16 cpcs_uu_cpi; - vuint16 reserved; -}; - -/* BD flags */ -#define EMPTY 0x8000 -#define READY 0x8000 -#define WRAP 0x2000 -#define INTERRUPT 0x1000 -#define LAST 0x0800 -#define FIRST 0x0400 -#define OAM 0x0400 -#define CONTINUOUS 0x0200 -#define HEC_ERROR 0x0080 -#define CELL_LOSS 0x0040 -#define CONGESTION 0x0020 -#define ABORT 0x0010 -#define LEN_ERROR 0x0002 -#define CRC_ERROR 0x0001 - -struct atm_connection_t { - struct atm_bd_t *rbd_ptr; - int num_rbd; - struct atm_bd_t *tbd_ptr; - int num_tbd; - struct ct_entry_t *ct_ptr; - struct tcte_entry_t *tcte_ptr; - void *drv; - void (*notify) (void *drv, int event); -}; - -struct atm_driver_t { - int loaded; - int started; - char *csram; - int csram_size; - uint32 *am_top; - uint16 *ap_top; - uint32 *int_reload_ptr; - uint32 *int_serv_ptr; - struct atm_bd_t *rbd_base_ptr; - struct atm_bd_t *tbd_base_ptr; - unsigned linerate_in_bps; -}; - -extern struct atm_connection_t g_conn[NUM_CONNECTIONS]; -extern struct atm_driver_t g_atm; - -extern int atmLoad (void); -extern void atmUnload (void); diff --git a/board/siemens/IAD210/flash.c b/board/siemens/IAD210/flash.c deleted file mode 100644 index c262e0f836..0000000000 --- a/board/siemens/IAD210/flash.c +++ /dev/null @@ -1,502 +0,0 @@ -/* - * (C) Copyright 2000, 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size, size<<20); - } - - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; - - /* Re-do sizing to get full correct info */ - size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_info[0].size = size; - - return (size); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } - -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - - /* Write auto select command: read Manufacturer ID */ - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00900090; - - value = addr[0]; - - switch (value) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[1]; /* device ID */ - - switch (value) { - case AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ -#if 0 /* enable when device IDs are available */ - case AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - - case AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0x00F000F0; /* reset bank */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00800080; - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long*)(info->start[sect]); - addr[0] = 0x00300030; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long*)(info->start[l_sect]); - while ((addr[0] & 0x00800080) != 0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - - DONE: - /* reset to read mode */ - addr = (volatile unsigned long *)info->start[0]; - addr[0] = 0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long*)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00A000A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/siemens/IAD210/u-boot.lds b/board/siemens/IAD210/u-boot.lds deleted file mode 100644 index 0e78e4fd47..0000000000 --- a/board/siemens/IAD210/u-boot.lds +++ /dev/null @@ -1,105 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - arch/powerpc/cpu/mpc8xx/libmpc8xx.o (.text*) - net/libnet.o (.text*) - drivers/rtc/librtc.o (.text*) - - . = env_offset; - common/env_embedded.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/siemens/SCM/Makefile b/board/siemens/SCM/Makefile deleted file mode 100644 index 07db9d44e5..0000000000 --- a/board/siemens/SCM/Makefile +++ /dev/null @@ -1,49 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common $(obj)../../tqc/tqm8xx) -endif - -LIB = $(obj)lib$(BOARD).o - -COBJS = scm.o flash.o fpga_scm.o ../common/fpga.o \ - ../../tqc/tqm8xx/load_sernum_ethaddr.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/siemens/SCM/flash.c b/board/siemens/SCM/flash.c deleted file mode 100644 index 4a6d5382be..0000000000 --- a/board/siemens/SCM/flash.c +++ /dev/null @@ -1,488 +0,0 @@ -/* - * (C) Copyright 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Flash Routines for AMD devices on the TQM8260 board - * - *-------------------------------------------------------------------- - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -#define V_ULONG(a) (*(volatile unsigned long *)( a )) -#define V_BYTE(a) (*(volatile unsigned char *)( a )) - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - - -/*----------------------------------------------------------------------- - */ -void flash_reset (void) -{ - if (flash_info[0].flash_id != FLASH_UNKNOWN) { - V_ULONG (flash_info[0].start[0]) = 0x00F000F0; - V_ULONG (flash_info[0].start[0] + 4) = 0x00F000F0; - } -} - -/*----------------------------------------------------------------------- - */ -ulong flash_get_size (ulong baseaddr, flash_info_t * info) -{ - short i; - unsigned long flashtest_h, flashtest_l; - - /* Write auto select command sequence and test FLASH answer */ - V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00AA00AA; - V_ULONG (baseaddr + ((ulong) 0x02AA << 3)) = 0x00550055; - V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00900090; - V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00AA00AA; - V_ULONG (baseaddr + 4 + ((ulong) 0x02AA << 3)) = 0x00550055; - V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00900090; - - flashtest_h = V_ULONG (baseaddr); /* manufacturer ID */ - flashtest_l = V_ULONG (baseaddr + 4); - - switch ((int) flashtest_h) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - flashtest_h = V_ULONG (baseaddr + 8); /* device ID */ - flashtest_l = V_ULONG (baseaddr + 12); - if (flashtest_h != flashtest_l) { - info->flash_id = FLASH_UNKNOWN; - } else { - switch (flashtest_h) { - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00400000; - break; /* 4 * 1 MB = 4 MB */ - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00400000; - break; /* 4 * 1 MB = 4 MB */ - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00800000; - break; /* 4 * 2 MB = 8 MB */ - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00800000; - break; /* 4 * 2 MB = 8 MB */ - case AMD_ID_DL322T: - info->flash_id += FLASH_AMDL322T; - info->sector_count = 71; - info->size = 0x01000000; - break; /* 4 * 4 MB = 16 MB */ - case AMD_ID_DL322B: - info->flash_id += FLASH_AMDL322B; - info->sector_count = 71; - info->size = 0x01000000; - break; /* 4 * 4 MB = 16 MB */ - case AMD_ID_DL323T: - info->flash_id += FLASH_AMDL323T; - info->sector_count = 71; - info->size = 0x01000000; - break; /* 4 * 4 MB = 16 MB */ - case AMD_ID_DL323B: - info->flash_id += FLASH_AMDL323B; - info->sector_count = 71; - info->size = 0x01000000; - break; /* 4 * 4 MB = 16 MB */ - case AMD_ID_LV640U: - info->flash_id += FLASH_AM640U; - info->sector_count = 128; - info->size = 0x02000000; - break; /* 4 * 8 MB = 32 MB */ - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* no or unknown flash */ - } - } - - if (flashtest_h == AMD_ID_LV640U) { - - /* set up sector start adress table (uniform sector type) */ - for (i = 0; i < info->sector_count; i++) - info->start[i] = baseaddr + (i * 0x00040000); - - } else if (info->flash_id & FLASH_BTYPE) { - - /* set up sector start adress table (bottom sector type) */ - info->start[0] = baseaddr + 0x00000000; - info->start[1] = baseaddr + 0x00010000; - info->start[2] = baseaddr + 0x00018000; - info->start[3] = baseaddr + 0x00020000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = baseaddr + (i * 0x00040000) - 0x000C0000; - } - - } else { - - /* set up sector start adress table (top sector type) */ - i = info->sector_count - 1; - info->start[i--] = baseaddr + info->size - 0x00010000; - info->start[i--] = baseaddr + info->size - 0x00018000; - info->start[i--] = baseaddr + info->size - 0x00020000; - for (; i >= 0; i--) { - info->start[i] = baseaddr + i * 0x00040000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - if ((V_ULONG (info->start[i] + 16) & 0x00010001) || - (V_ULONG (info->start[i] + 20) & 0x00010001)) { - info->protect[i] = 1; /* D0 = 1 if protected */ - } else { - info->protect[i] = 0; - } - } - - flash_reset (); - return (info->size); -} - -/*----------------------------------------------------------------------- - */ -unsigned long flash_init (void) -{ - unsigned long size_b0 = 0; - int i; - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here (only one bank) */ - - size_b0 = flash_get_size (CONFIG_SYS_FLASH0_BASE, &flash_info[0]); - if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0 >> 20); - } - - /* - * protect monitor and environment sectors - */ - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]); -#endif - -#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR) -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]); -#endif - - return (size_b0); -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t * info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf ("AMD "); - break; - case FLASH_MAN_FUJ: - printf ("FUJITSU "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM800T: - printf ("29LV800T (8 M, top sector)\n"); - break; - case FLASH_AM800B: - printf ("29LV800T (8 M, bottom sector)\n"); - break; - case FLASH_AM160T: - printf ("29LV160T (16 M, top sector)\n"); - break; - case FLASH_AM160B: - printf ("29LV160B (16 M, bottom sector)\n"); - break; - case FLASH_AMDL322T: - printf ("29DL322T (32 M, top sector)\n"); - break; - case FLASH_AMDL322B: - printf ("29DL322B (32 M, bottom sector)\n"); - break; - case FLASH_AMDL323T: - printf ("29DL323T (32 M, top sector)\n"); - break; - case FLASH_AMDL323B: - printf ("29DL323B (32 M, bottom sector)\n"); - break; - case FLASH_AM640U: - printf ("29LV640D (64 M, uniform sector)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ -int flash_erase (flash_info_t * info, int s_first, int s_last) -{ - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect]) - prot++; - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00800080; - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00800080; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055; - udelay (1000); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - V_ULONG (info->start[sect]) = 0x00300030; - V_ULONG (info->start[sect] + 4) = 0x00300030; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - while ((V_ULONG (info->start[l_sect]) & 0x00800080) != 0x00800080 || - (V_ULONG (info->start[l_sect] + 4) & 0x00800080) != 0x00800080) - { - if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - serial_putc ('.'); - last = now; - } - } - - DONE: - /* reset to read mode */ - flash_reset (); - - printf (" done\n"); - return 0; -} - -static int write_dword (flash_info_t *, ulong, unsigned char *); - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong dp; - static unsigned char bb[8]; - int i, l, rc, cc = cnt; - - dp = (addr & ~7); /* get lower dword aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - dp) != 0) { - for (i = 0; i < 8; i++) - bb[i] = (i < l || (i - l) >= cc) ? V_BYTE (dp + i) : *src++; - if ((rc = write_dword (info, dp, bb)) != 0) { - return (rc); - } - dp += 8; - cc -= 8 - l; - } - - /* - * handle word aligned part - */ - while (cc >= 8) { - if ((rc = write_dword (info, dp, src)) != 0) { - return (rc); - } - dp += 8; - src += 8; - cc -= 8; - } - - if (cc <= 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - for (i = 0; i < 8; i++) { - bb[i] = (i < cc) ? *src++ : V_BYTE (dp + i); - } - return (write_dword (info, dp, bb)); -} - -/*----------------------------------------------------------------------- - * Write a dword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata) -{ - ulong start, cl, ch; - int flag, i; - - for (ch = 0, i = 0; i < 4; i++) - ch = (ch << 8) + *pdata++; /* high word */ - for (cl = 0, i = 0; i < 4; i++) - cl = (cl << 8) + *pdata++; /* low word */ - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *) dest) & ch) != ch - || (*((vu_long *) (dest + 4)) & cl) != cl) { - return (2); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00A000A0; - V_ULONG (dest) = ch; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA; - V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055; - V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00A000A0; - V_ULONG (dest + 4) = cl; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* data polling for D7 */ - start = get_timer (0); - while (((V_ULONG (dest) & 0x00800080) != (ch & 0x00800080)) || - ((V_ULONG (dest + 4) & 0x00800080) != (cl & 0x00800080))) { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} diff --git a/board/siemens/SCM/fpga_scm.c b/board/siemens/SCM/fpga_scm.c deleted file mode 100644 index acd9c1570f..0000000000 --- a/board/siemens/SCM/fpga_scm.c +++ /dev/null @@ -1,104 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <common.h> -#include <mpc8260.h> -#include <common.h> -#include "../common/fpga.h" - -fpga_t fpga_list[] = { - {"FIOX", CONFIG_SYS_FIOX_BASE, - CONFIG_SYS_PD_FIOX_INIT, CONFIG_SYS_PD_FIOX_PROG, CONFIG_SYS_PD_FIOX_DONE} - , - {"FDOHM", CONFIG_SYS_FDOHM_BASE, - CONFIG_SYS_PD_FDOHM_INIT, CONFIG_SYS_PD_FDOHM_PROG, CONFIG_SYS_PD_FDOHM_DONE} -}; -int fpga_count = sizeof (fpga_list) / sizeof (fpga_t); - - -ulong fpga_control (fpga_t * fpga, int cmd) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - switch (cmd) { - case FPGA_INIT_IS_HIGH: - immr->im_ioport.iop_pdird &= ~fpga->init_mask; /* input */ - return (immr->im_ioport.iop_pdatd & fpga->init_mask) ? 1 : 0; - - case FPGA_INIT_SET_LOW: - immr->im_ioport.iop_pdird |= fpga->init_mask; /* output */ - immr->im_ioport.iop_pdatd &= ~fpga->init_mask; - break; - - case FPGA_INIT_SET_HIGH: - immr->im_ioport.iop_pdird |= fpga->init_mask; /* output */ - immr->im_ioport.iop_pdatd |= fpga->init_mask; - break; - - case FPGA_PROG_SET_LOW: - immr->im_ioport.iop_pdatd &= ~fpga->prog_mask; - break; - - case FPGA_PROG_SET_HIGH: - immr->im_ioport.iop_pdatd |= fpga->prog_mask; - break; - - case FPGA_DONE_IS_HIGH: - return (immr->im_ioport.iop_pdatd & fpga->done_mask) ? 1 : 0; - - case FPGA_READ_MODE: - break; - - case FPGA_LOAD_MODE: - break; - - case FPGA_GET_ID: - if (fpga->conf_base == CONFIG_SYS_FIOX_BASE) { - ulong ver = - *(volatile ulong *) (fpga->conf_base + 0x10); - return ((ver >> 10) & 0xf) + ((ver >> 2) & 0xf0); - } else if (fpga->conf_base == CONFIG_SYS_FDOHM_BASE) { - return (*(volatile ushort *) fpga->conf_base) & 0xff; - } else { - return *(volatile ulong *) fpga->conf_base; - } - - case FPGA_INIT_PORTS: - immr->im_ioport.iop_ppard &= ~fpga->init_mask; /* INIT I/O */ - immr->im_ioport.iop_psord &= ~fpga->init_mask; - immr->im_ioport.iop_pdird &= ~fpga->init_mask; - - immr->im_ioport.iop_ppard &= ~fpga->prog_mask; /* PROG Output */ - immr->im_ioport.iop_psord &= ~fpga->prog_mask; - immr->im_ioport.iop_pdird |= fpga->prog_mask; - - immr->im_ioport.iop_ppard &= ~fpga->done_mask; /* DONE Input */ - immr->im_ioport.iop_psord &= ~fpga->done_mask; - immr->im_ioport.iop_pdird &= ~fpga->done_mask; - - break; - - } - return 0; -} diff --git a/board/siemens/SCM/scm.c b/board/siemens/SCM/scm.c deleted file mode 100644 index 461b56e3ff..0000000000 --- a/board/siemens/SCM/scm.c +++ /dev/null @@ -1,541 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <ioports.h> -#include <mpc8260.h> -#include <linux/compiler.h> - -#include "scm.h" - -DECLARE_GLOBAL_DATA_PTR; - -static void config_scoh_cs(void); -extern int fpga_init(void); - -#if 0 -#define DEBUGF(fmt,args...) printf (fmt ,##args) -#else -#define DEBUGF(fmt,args...) -#endif - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII COL */ - /* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII CRS */ - /* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_ER */ - /* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 MII TX_EN */ - /* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_DV */ - /* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 MII RX_ER */ - /* PA25 */ { 0, 0, 0, 1, 0, 0 }, - /* PA24 */ { 0, 0, 0, 1, 0, 0 }, - /* PA23 */ { 0, 0, 0, 1, 0, 0 }, - /* PA22 */ { 0, 0, 0, 1, 0, 0 }, - /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[3] */ - /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[2] */ - /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[1] */ - /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 MII TxD[0] */ - /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[0] */ - /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[1]*/ - /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[2] */ - /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RxD[3] */ - /* PA13 */ { 0, 0, 0, 1, 0, 0 }, - /* PA12 */ { 0, 0, 0, 1, 0, 0 }, - /* PA11 */ { 0, 0, 0, 1, 0, 0 }, - /* PA10 */ { 0, 0, 0, 1, 0, 0 }, - /* PA9 */ { 1, 1, 1, 1, 0, 0 }, /* TDM_A1 L1TXD0 */ - /* PA8 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1RXD0 */ - /* PA7 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1TSYNC */ - /* PA6 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A1 L1RSYNC */ - /* PA5 */ { 1, 0, 0, 0, 0, 0 }, /* FIOX_FPGA_PR */ - /* PA4 */ { 1, 0, 0, 0, 0, 0 }, /* DOHM_FPGA_PR */ - /* PA3 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK4 */ - /* PA2 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK4 */ - /* PA1 */ { 0, 0, 0, 1, 0, 0 }, - /* PA0 */ { 1, 0, 0, 0, 0, 0 } /* BUSY */ - }, - - /* Port B configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PB31 */ { 1, 0, 0, 1, 0, 0 }, /* EQ_ALARM_MIN */ - /* PB30 */ { 1, 0, 0, 1, 0, 0 }, /* EQ_ALARM_MAJ */ - /* PB29 */ { 1, 0, 0, 1, 0, 0 }, /* COM_ALARM_MIN */ - /* PB28 */ { 1, 0, 0, 1, 0, 0 }, /* COM_ALARM_MAJ */ - /* PB27 */ { 0, 1, 0, 0, 0, 0 }, - /* PB26 */ { 0, 1, 0, 0, 0, 0 }, - /* PB25 */ { 1, 0, 0, 1, 0, 0 }, /* LED_GREEN_L */ - /* PB24 */ { 1, 0, 0, 1, 0, 0 }, /* LED_RED_L */ - /* PB23 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1TXD */ - /* PB22 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1RXD */ - /* PB21 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1TSYNC */ - /* PB20 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_D2 L1RSYNC */ - /* PB19 */ { 1, 0, 0, 0, 0, 0 }, /* UID */ - /* PB18 */ { 0, 1, 0, 0, 0, 0 }, - /* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_DV */ - /* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_ER */ - /* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_ER */ - /* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TX_EN */ - /* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII COL */ - /* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII CRS */ - /* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[3] */ - /* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[2] */ - /* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[1] */ - /* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RxD[0] */ - /* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[3] */ - /* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[2] */ - /* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[1] */ - /* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FCC3 MII TxD[0] */ - /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - }, - - /* Port C configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PC31 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK1 */ - /* PC30 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK1 */ - /* PC29 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK3 */ - /* PC28 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK3 */ - /* PC27 */ { 1, 1, 0, 0, 0, 0 }, /* TDM RXCLK2 */ - /* PC26 */ { 1, 1, 0, 0, 0, 0 }, /* TDM TXCLK2 */ - /* PC25 */ { 0, 0, 0, 1, 0, 0 }, - /* PC24 */ { 0, 0, 0, 1, 0, 0 }, - /* PC23 */ { 0, 1, 0, 1, 0, 0 }, - /* PC22 */ { 0, 1, 0, 0, 0, 0 }, - /* PC21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */ - /* PC20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */ - /* PC19 */ { 0, 1, 0, 0, 0, 0 }, - /* PC18 */ { 0, 1, 0, 0, 0, 0 }, - /* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII RX_CLK */ - /* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC3 MII TX_CLK */ - /* PC15 */ { 0, 0, 0, 1, 0, 0 }, - /* PC14 */ { 0, 1, 0, 0, 0, 0 }, - /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* RES_PHY_L */ - /* PC12 */ { 0, 0, 0, 1, 0, 0 }, - /* PC11 */ { 0, 0, 0, 1, 0, 0 }, - /* PC10 */ { 0, 0, 0, 1, 0, 0 }, - /* PC9 */ { 0, 1, 1, 0, 0, 0 }, /* TDM_A2 L1TSYNC */ - /* PC8 */ { 0, 0, 0, 0, 0, 0 }, /* FEP_RDY */ - /* PC7 */ { 0, 0, 0, 0, 0, 0 }, - /* PC6 */ { 0, 0, 0, 0, 0, 0 }, /* UC4_ALARM_L */ - /* PC5 */ { 0, 0, 0, 0, 0, 0 }, /* UC3_ALARM_L */ - /* PC4 */ { 0, 0, 0, 0, 0, 0 }, /* UC2_ALARM_L */ - /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* RES_MISC_L */ - /* PC2 */ { 0, 0, 0, 1, 0, 0 }, /* RES_OH_L */ - /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* RES_DOHM_L */ - /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* RES_FIOX_L */ - }, - - /* Port D configuration */ - { /* conf ppar psor pdir podr pdat */ - /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */ - /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */ - /* PD29 */ { 0, 0, 0, 0, 0, 0 }, /* INIT_F */ - /* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* DONE_F */ - /* PD27 */ { 0, 0, 0, 0, 0, 0 }, /* INIT_D */ - /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* DONE_D */ - /* PD25 */ { 0, 0, 0, 1, 0, 0 }, - /* PD24 */ { 0, 0, 0, 1, 0, 0 }, - /* PD23 */ { 0, 0, 0, 1, 0, 0 }, - /* PD22 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1TXD */ - /* PD21 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1RXD */ - /* PD20 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_A2 L1RSYNC */ - /* PD19 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPISEL */ - /* PD18 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPICLK */ - /* PD17 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPIMOSI */ - /* PD16 */ { 1, 1, 1, 0, 0, 0 }, /* SPI SPIMOSO */ -#if defined(CONFIG_SOFT_I2C) - /* PD15 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SDA */ - /* PD14 */ { 1, 0, 0, 1, 1, 1 }, /* I2C SCL */ -#else -#if defined(CONFIG_HARD_I2C) - /* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL */ -#else /* normal I/O port pins */ - /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */ - /* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SCL */ -#endif -#endif - /* PD13 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1TXD */ - /* PD12 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1RXD */ - /* PD11 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1TSYNC */ - /* PD10 */ { 1, 1, 1, 0, 0, 0 }, /* TDM_B1 L1RSYNC */ - /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* SMC1 TXD */ - /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* SMC1 RXD */ - /* PD7 */ { 0, 0, 0, 1, 0, 1 }, - /* PD6 */ { 0, 0, 0, 1, 0, 1 }, - /* PD5 */ { 0, 0, 0, 1, 0, 0 }, /* PROG_F */ - /* PD4 */ { 0, 0, 0, 1, 0, 0 }, /* PROG_D */ - /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */ - /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */ - } -}; - -/* ------------------------------------------------------------------------- */ - -/* Check Board Identity: - */ -int checkboard (void) -{ - char str[64]; - int i = getenv_f("serial#", str, sizeof (str)); - - puts ("Board: "); - - if (!i || strncmp (str, "TQM8260", 7)) { - puts ("### No HW ID - assuming TQM8260\n"); - return (0); - } - - puts (str); - putc ('\n'); - - return 0; -} - -/* ------------------------------------------------------------------------- */ - -/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx - * - * This routine performs standard 8260 initialization sequence - * and calculates the available memory size. It may be called - * several times to try different SDRAM configurations on both - * 60x and local buses. - */ -static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, - ulong orx, volatile uchar * base) -{ - volatile uchar c = 0xff; - volatile uint *sdmr_ptr; - volatile uint *orx_ptr; - ulong maxsize, size; - int i; - - /* We must be able to test a location outsize the maximum legal size - * to find out THAT we are outside; but this address still has to be - * mapped by the controller. That means, that the initial mapping has - * to be (at least) twice as large as the maximum expected size. - */ - maxsize = (1 + (~orx | 0x7fff)) / 2; - - /* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that - * we are configuring CS1 if base != 0 - */ - sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr; - orx_ptr = base ? &memctl->memc_or2 : &memctl->memc_or1; - - *orx_ptr = orx; - - /* - * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): - * - * "At system reset, initialization software must set up the - * programmable parameters in the memory controller banks registers - * (ORx, BRx, P/LSDMR). After all memory parameters are configured, - * system software should execute the following initialization sequence - * for each SDRAM device. - * - * 1. Issue a PRECHARGE-ALL-BANKS command - * 2. Issue eight CBR REFRESH commands - * 3. Issue a MODE-SET command to initialize the mode register - * - * The initial commands are executed by setting P/LSDMR[OP] and - * accessing the SDRAM with a single-byte transaction." - * - * The appropriate BRx/ORx registers have already been set when we - * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. - */ - - *sdmr_ptr = sdmr | PSDMR_OP_PREA; - *base = c; - - *sdmr_ptr = sdmr | PSDMR_OP_CBRR; - for (i = 0; i < 8; i++) - *base = c; - - *sdmr_ptr = sdmr | PSDMR_OP_MRW; - *(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */ - - *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; - *base = c; - - size = get_ram_size((long *)base, maxsize); - - *orx_ptr = orx | ~(size - 1); - - return (size); -} - -/* - * Test Power-On-Reset. - */ -int power_on_reset (void) -{ - /* Test Reset Status Register */ - return gd->reset_status & RSR_CSRS ? 0 : 1; -} - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; - -#ifndef CONFIG_SYS_RAMBOOT - long size8, size9; -#endif - long psize, lsize; - - psize = 16 * 1024 * 1024; - lsize = 0; - - memctl->memc_psrt = CONFIG_SYS_PSRT; - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - -#if 0 /* Just for debugging */ -#define prt_br_or(brX,orX) do { \ - ulong start = memctl->memc_ ## brX & 0xFFFF8000; \ - ulong sizem = ~memctl->memc_ ## orX | 0x00007FFF; \ - printf ("\n" \ - #brX " 0x%08x " #orX " 0x%08x " \ - "==> 0x%08lx ... 0x%08lx = %ld MB\n", \ - memctl->memc_ ## brX, memctl->memc_ ## orX, \ - start, start+sizem, (sizem+1)>>20); \ - } while (0) - prt_br_or (br0, or0); - prt_br_or (br1, or1); - prt_br_or (br2, or2); - prt_br_or (br3, or3); -#endif - -#ifndef CONFIG_SYS_RAMBOOT - /* 60x SDRAM setup: - */ - size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL, - (uchar *) CONFIG_SYS_SDRAM_BASE); - size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL, - (uchar *) CONFIG_SYS_SDRAM_BASE); - - if (size8 < size9) { - psize = size9; - printf ("(60x:9COL - %ld MB, ", psize >> 20); - } else { - psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL, - (uchar *) CONFIG_SYS_SDRAM_BASE); - printf ("(60x:8COL - %ld MB, ", psize >> 20); - } - - /* Local SDRAM setup: - */ -#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM - memctl->memc_lsrt = CONFIG_SYS_LSRT; - size8 = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL, - (uchar *) SDRAM_BASE2_PRELIM); - size9 = try_init (memctl, CONFIG_SYS_LSDMR_9COL, CONFIG_SYS_OR2_9COL, - (uchar *) SDRAM_BASE2_PRELIM); - - if (size8 < size9) { - lsize = size9; - printf ("Local:9COL - %ld MB) using ", lsize >> 20); - } else { - lsize = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL, - (uchar *) SDRAM_BASE2_PRELIM); - printf ("Local:8COL - %ld MB) using ", lsize >> 20); - } - -#if 0 - /* Set up BR2 so that the local SDRAM goes - * right after the 60x SDRAM - */ - memctl->memc_br2 = (CONFIG_SYS_BR2_PRELIM & ~BRx_BA_MSK) | - (CONFIG_SYS_SDRAM_BASE + psize); -#endif -#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */ -#endif /* CONFIG_SYS_RAMBOOT */ - - icache_enable (); - - config_scoh_cs (); - - return (psize); -} - -/* ------------------------------------------------------------------------- */ - -static void config_scoh_cs (void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immr->im_memctl; - volatile can_reg_t *can = (volatile can_reg_t *) CONFIG_SYS_CAN0_BASE; - __maybe_unused volatile uint tmp, i; - - /* Initialize OR3 / BR3 for CAN Bus Controller 0 */ - memctl->memc_or3 = CONFIG_SYS_CAN0_OR3; - memctl->memc_br3 = CONFIG_SYS_CAN0_BR3; - /* Initialize OR4 / BR4 for CAN Bus Controller 1 */ - memctl->memc_or4 = CONFIG_SYS_CAN1_OR4; - memctl->memc_br4 = CONFIG_SYS_CAN1_BR4; - - /* Initialize MAMR to write in the array at address 0x0 */ - memctl->memc_mamr = 0x00 | MxMR_OP_WARR | MxMR_GPL_x4DIS; - - /* Initialize UPMA for CAN: single read */ - memctl->memc_mdr = 0xcffeec00; - udelay (1); /* Necessary to have the data correct in the UPM array!!!! */ - /* The read on the CAN controller write the data of mdr in UPMA array. */ - /* The index to the array will be incremented automatically - through this read */ - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x0ffcec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x0ffcec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x0ffcec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x0ffcec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x0ffcfc00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x0ffcfc00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0xfffdec07; - udelay (1); - tmp = can->cpu_interface; - - - /* Initialize MAMR to write in the array at address 0x18 */ - memctl->memc_mamr = 0x18 | MxMR_OP_WARR | MxMR_GPL_x4DIS; - - /* Initialize UPMA for CAN: single write */ - memctl->memc_mdr = 0xfcffec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x00ffec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x00ffec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x00ffec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x00ffec00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x00fffc00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x00fffc00; - udelay (1); - tmp = can->cpu_interface; - - memctl->memc_mdr = 0x30ffec07; - udelay (1); - tmp = can->cpu_interface; - - /* Initialize MAMR */ - memctl->memc_mamr = MxMR_GPL_x4DIS; /* GPL_B4 ouput line Disable */ - - - /* Initialize OR5 / BR5 for the extended EEPROM Bank0 */ - memctl->memc_or5 = CONFIG_SYS_EXTPROM_OR5; - memctl->memc_br5 = CONFIG_SYS_EXTPROM_BR5; - /* Initialize OR6 / BR6 for the extended EEPROM Bank1 */ - memctl->memc_or6 = CONFIG_SYS_EXTPROM_OR6; - memctl->memc_br6 = CONFIG_SYS_EXTPROM_BR6; - - /* Initialize OR7 / BR7 for the Glue Logic */ - memctl->memc_or7 = CONFIG_SYS_FIOX_OR7; - memctl->memc_br7 = CONFIG_SYS_FIOX_BR7; - - /* Initialize OR8 / BR8 for the DOH Logic */ - memctl->memc_or8 = CONFIG_SYS_FDOHM_OR8; - memctl->memc_br8 = CONFIG_SYS_FDOHM_BR8; - - DEBUGF ("OR0 %08x BR0 %08x\n", memctl->memc_or0, memctl->memc_br0); - DEBUGF ("OR1 %08x BR1 %08x\n", memctl->memc_or1, memctl->memc_br1); - DEBUGF ("OR2 %08x BR2 %08x\n", memctl->memc_or2, memctl->memc_br2); - DEBUGF ("OR3 %08x BR3 %08x\n", memctl->memc_or3, memctl->memc_br3); - DEBUGF ("OR4 %08x BR4 %08x\n", memctl->memc_or4, memctl->memc_br4); - DEBUGF ("OR5 %08x BR5 %08x\n", memctl->memc_or5, memctl->memc_br5); - DEBUGF ("OR6 %08x BR6 %08x\n", memctl->memc_or6, memctl->memc_br6); - DEBUGF ("OR7 %08x BR7 %08x\n", memctl->memc_or7, memctl->memc_br7); - DEBUGF ("OR8 %08x BR8 %08x\n", memctl->memc_or8, memctl->memc_br8); - - DEBUGF ("UPMA addr 0x0\n"); - memctl->memc_mamr = 0x00 | MxMR_OP_RARR | MxMR_GPL_x4DIS; - for (i = 0; i < 0x8; i++) { - tmp = can->cpu_interface; - udelay (1); - DEBUGF (" %08x ", memctl->memc_mdr); - } - DEBUGF ("\nUPMA addr 0x18\n"); - memctl->memc_mamr = 0x18 | MxMR_OP_RARR | MxMR_GPL_x4DIS; - for (i = 0; i < 0x8; i++) { - tmp = can->cpu_interface; - udelay (1); - DEBUGF (" %08x ", memctl->memc_mdr); - } - DEBUGF ("\n"); - memctl->memc_mamr = MxMR_GPL_x4DIS; -} - -/* ------------------------------------------------------------------------- */ - -int misc_init_r (void) -{ - fpga_init (); - return (0); -} - -/* ------------------------------------------------------------------------- */ diff --git a/board/siemens/SCM/scm.h b/board/siemens/SCM/scm.h deleted file mode 100644 index cb5e03e581..0000000000 --- a/board/siemens/SCM/scm.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __SCM_H -#define __SCM_H - -/*----------------*/ -/* CAN Structures */ -/*----------------*/ - -/* Message */ -struct can_msg { - uchar ctrl_0; - uchar ctrl_1; - uchar arbit_0; - uchar arbit_1; - uchar arbit_2; - uchar arbit_3; - uchar config; - uchar data[8]; -} __attribute__ ((packed)); - -typedef struct can_msg can_msg_t; - -/* CAN Register */ -typedef struct can_reg { - uchar ctrl; - uchar status; - uchar cpu_interface; - uchar resv0; - ushort high_speed_rd; - ushort gbl_mask_std; - uint gbl_mask_extd; - uint msg15_mask; - can_msg_t msg1; - uchar clkout; - can_msg_t msg2; - uchar bus_config; - can_msg_t msg3; - uchar bit_timing_0; - can_msg_t msg4; - uchar bit_timing_1; - can_msg_t msg5; - uchar interrupt; - can_msg_t msg6; - uchar resv1; - can_msg_t msg7; - uchar resv2; - can_msg_t msg8; - uchar resv3; - can_msg_t msg9; - uchar p1conf; - can_msg_t msg10; - uchar p2conf; - can_msg_t msg11; - uchar p1in; - can_msg_t msg12; - uchar p2in; - can_msg_t msg13; - uchar p1out; - can_msg_t msg14; - uchar p2out; - can_msg_t msg15; - uchar ser_res_addr; - uchar resv_cs[0x8000-0x100]; /* 0x8000 is the min size for CS */ -} can_reg_t; - - -#endif /* __SCM_H */ diff --git a/board/siemens/common/README b/board/siemens/common/README deleted file mode 100644 index 7f1c8cd62d..0000000000 --- a/board/siemens/common/README +++ /dev/null @@ -1,27 +0,0 @@ -CCM/SCM-Ergaenzungen fuer U-Boot und Linux: -------------------------------------------- - -Es gibt nun ein gemeinsames Kommando zum Laden der FPGAs: - - => help fpga - fpga fpga status [name] - print FPGA status - fpga reset [name] - reset FPGA - fpga load [name] addr - load FPGA configuration data - -Der Name kann beim CCM-Module auch weggelassen werden. -Die Laengenangabe und damit "puma_len" ist nicht mehr -noetig: - - => fpga load puma 40600000 - FPGA load PUMA: addr 40600000: (00000005)... done - -Die MTD-Partitionierung kann nun mittels "bootargs" ueber- -geben werden: - - => printenv addmtd - addmtd=setenv bootargs ${bootargs} - mtdparts=0:256k(U-Boot)ro,768k(Kernel),-(Rest)\;1:-(myJFFS2) - -Die Portierung auf SMC ist natuerlich noch nicht getestet. - -Wolfgang Grandegger (04.06.2002) diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c deleted file mode 100644 index ef8bfde7f1..0000000000 --- a/board/siemens/common/fpga.c +++ /dev/null @@ -1,369 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - -#include <common.h> -#include <command.h> -#include <linux/ctype.h> -#include <common.h> - -#include "fpga.h" - -int power_on_reset(void); - -/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ - - -static int fpga_get_version(fpga_t* fpga, char* name) -{ - char vname[12]; - /* - * Net-list string format: - * "vvvvvvvvddddddddn...". - * Version Date Name - * "0000000322042002PUMA" = PUMA version 3 from 22.04.2002. - */ - if (strlen(name) < (16 + strlen(fpga->name))) - goto failure; - /* Check FPGA name */ - if (strcmp(&name[16], fpga->name) != 0) - goto failure; - /* Get version number */ - memcpy(vname, name, 8); - vname[8] = '\0'; - return simple_strtoul(vname, NULL, 16); - - failure: - printf("Image name %s is invalid\n", name); - return -1; -} - -/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ - -static fpga_t* fpga_get(char* fpga_name) -{ - char name[FPGA_NAME_LEN]; - int i; - - if (strlen(fpga_name) >= FPGA_NAME_LEN) - goto failure; - for (i = 0; i < strlen(fpga_name); i++) - name[i] = toupper(fpga_name[i]); - name[i] = '\0'; - for (i = 0; i < fpga_count; i++) { - if (strcmp(name, fpga_list[i].name) == 0) - return &fpga_list[i]; - } - failure: - printf("FPGA: name %s is invalid\n", fpga_name); - return NULL; -} - -/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ - -static void fpga_status (fpga_t* fpga) -{ - /* Check state */ - if (fpga_control(fpga, FPGA_DONE_IS_HIGH)) - printf ("%s is loaded (%08lx)\n", - fpga->name, fpga_control(fpga, FPGA_GET_ID)); - else - printf ("%s is NOT loaded\n", fpga->name); -} - -/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ - -#define FPGA_RESET_TIMEOUT 100 /* = 10 ms */ - -static int fpga_reset (fpga_t* fpga) -{ - int i; - - /* Set PROG to low and wait til INIT goes low */ - fpga_control(fpga, FPGA_PROG_SET_LOW); - for (i = 0; i < FPGA_RESET_TIMEOUT; i++) { - udelay (100); - if (!fpga_control(fpga, FPGA_INIT_IS_HIGH)) - break; - } - if (i == FPGA_RESET_TIMEOUT) - goto failure; - - /* Set PROG to high and wait til INIT goes high */ - fpga_control(fpga, FPGA_PROG_SET_HIGH); - for (i = 0; i < FPGA_RESET_TIMEOUT; i++) { - udelay (100); - if (fpga_control(fpga, FPGA_INIT_IS_HIGH)) - break; - } - if (i == FPGA_RESET_TIMEOUT) - goto failure; - - return 0; - failure: - return 1; -} - -/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ - -#define FPGA_LOAD_TIMEOUT 100 /* = 10 ms */ - -static int fpga_load (fpga_t* fpga, ulong addr, int checkall) -{ - volatile uchar *fpga_addr = (volatile uchar *)fpga->conf_base; - image_header_t *hdr = (image_header_t *)addr; - ulong len; - uchar *data; - char msg[32]; - int verify, i; - -#if defined(CONFIG_FIT) - if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) { - puts ("Non legacy image format not supported\n"); - return -1; - } -#endif - - /* - * Check the image header and data of the net-list - */ - if (!image_check_magic (hdr)) { - strcpy (msg, "Bad Image Magic Number"); - goto failure; - } - - if (!image_check_hcrc (hdr)) { - strcpy (msg, "Bad Image Header CRC"); - goto failure; - } - - data = (uchar*)image_get_data (hdr); - len = image_get_data_size (hdr); - - verify = getenv_yesno ("verify"); - if (verify) { - if (!image_check_dcrc (hdr)) { - strcpy (msg, "Bad Image Data CRC"); - goto failure; - } - } - - if (checkall && fpga_get_version(fpga, image_get_name (hdr)) < 0) - return 1; - - /* align length */ - if (len & 1) - ++len; - - /* - * Reset FPGA and wait for completion - */ - if (fpga_reset(fpga)) { - strcpy (msg, "Reset Timeout"); - goto failure; - } - - printf ("(%s)... ", image_get_name (hdr)); - /* - * Copy data to FPGA - */ - fpga_control (fpga, FPGA_LOAD_MODE); - while (len--) { - *fpga_addr = *data++; - } - fpga_control (fpga, FPGA_READ_MODE); - - /* - * Wait for completion and check error status if timeout - */ - for (i = 0; i < FPGA_LOAD_TIMEOUT; i++) { - udelay (100); - if (fpga_control (fpga, FPGA_DONE_IS_HIGH)) - break; - } - if (i == FPGA_LOAD_TIMEOUT) { - if (fpga_control(fpga, FPGA_INIT_IS_HIGH)) - strcpy(msg, "Invalid Size"); - else - strcpy(msg, "CRC Error"); - goto failure; - } - - printf("done\n"); - return 0; - - failure: - - printf("ERROR: %s\n", msg); - return 1; -} - -#if defined(CONFIG_CMD_BSP) - -/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ - -int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - ulong addr = 0; - int i; - fpga_t* fpga; - - if (argc < 2) - goto failure; - - if (strncmp(argv[1], "stat", 4) == 0) { /* status */ - if (argc == 2) { - for (i = 0; i < fpga_count; i++) { - fpga_status (&fpga_list[i]); - } - } - else if (argc == 3) { - if ((fpga = fpga_get(argv[2])) == 0) - goto failure; - fpga_status (fpga); - } - else - goto failure; - } - else if (strcmp(argv[1],"load") == 0) { /* load */ - if (argc == 3 && fpga_count == 1) { - fpga = &fpga_list[0]; - } - else if (argc == 4) { - if ((fpga = fpga_get(argv[2])) == 0) - goto failure; - } - else - goto failure; - - addr = simple_strtoul(argv[argc-1], NULL, 16); - - printf ("FPGA load %s: addr %08lx: ", - fpga->name, addr); - fpga_load (fpga, addr, 1); - - } - else if (strncmp(argv[1], "rese", 4) == 0) { /* reset */ - if (argc == 2 && fpga_count == 1) { - fpga = &fpga_list[0]; - } - else if (argc == 3) { - if ((fpga = fpga_get(argv[2])) == 0) - goto failure; - } - else - goto failure; - - printf ("FPGA reset %s: ", fpga->name); - if (fpga_reset(fpga)) - printf ("ERROR: Timeout\n"); - else - printf ("done\n"); - } - else - goto failure; - - return 0; - - failure: - return cmd_usage(cmdtp); -} - -U_BOOT_CMD( - fpga, 4, 1, do_fpga, - "access FPGA(s)", - "fpga status [name] - print FPGA status\n" - "fpga reset [name] - reset FPGA\n" - "fpga load [name] addr - load FPGA configuration data" -); - -#endif - -/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ - -int fpga_init (void) -{ - ulong addr; - ulong new_id, old_id = 0; - image_header_t *hdr; - fpga_t* fpga; - int do_load, i, j; - char name[16], *s; - - /* - * Port setup for FPGA control - */ - for (i = 0; i < fpga_count; i++) { - fpga_control(&fpga_list[i], FPGA_INIT_PORTS); - } - - /* - * Load FPGA(s): a new net-list is loaded if the FPGA is - * empty, Power-on-Reset or the old one is not up-to-date - */ - for (i = 0; i < fpga_count; i++) { - fpga = &fpga_list[i]; - printf ("%s: ", fpga->name); - - for (j = 0; j < strlen(fpga->name); j++) - name[j] = tolower(fpga->name[j]); - name[j] = '\0'; - sprintf(name, "%s_addr", name); - addr = 0; - if ((s = getenv(name)) != NULL) - addr = simple_strtoul(s, NULL, 16); - - if (!addr) { - printf ("env. variable %s undefined\n", name); - return 1; - } - - hdr = (image_header_t *)addr; -#if defined(CONFIG_FIT) - if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) { - puts ("Non legacy image format not supported\n"); - return -1; - } -#endif - - if ((new_id = fpga_get_version(fpga, image_get_name (hdr))) == -1) - return 1; - - do_load = 1; - - if (!power_on_reset() && fpga_control(fpga, FPGA_DONE_IS_HIGH)) { - old_id = fpga_control(fpga, FPGA_GET_ID); - if (new_id == old_id) - do_load = 0; - } - - if (do_load) { - printf ("loading "); - fpga_load (fpga, addr, 0); - } else { - printf ("loaded (%08lx)\n", old_id); - } - } - - return 0; -} diff --git a/board/sixnet/u-boot.lds b/board/sixnet/u-boot.lds index 02d198001f..6cf7a01738 100644 --- a/board/sixnet/u-boot.lds +++ b/board/sixnet/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/snmc/qs850/u-boot.lds b/board/snmc/qs850/u-boot.lds index 9ab248a4e9..f57f8a0258 100644 --- a/board/snmc/qs850/u-boot.lds +++ b/board/snmc/qs850/u-boot.lds @@ -69,9 +69,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/snmc/qs860t/u-boot.lds b/board/snmc/qs860t/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/snmc/qs860t/u-boot.lds +++ b/board/snmc/qs860t/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/spc1920/u-boot.lds b/board/spc1920/u-boot.lds index d0b60cf7c1..18f962cfa5 100644 --- a/board/spc1920/u-boot.lds +++ b/board/spc1920/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/spd8xx/u-boot.lds b/board/spd8xx/u-boot.lds index a84e7fd35b..f69e39d583 100644 --- a/board/spd8xx/u-boot.lds +++ b/board/spd8xx/u-boot.lds @@ -75,9 +75,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/spd8xx/u-boot.lds.debug b/board/spd8xx/u-boot.lds.debug index a95c47feac..4155b604fb 100644 --- a/board/spd8xx/u-boot.lds.debug +++ b/board/spd8xx/u-boot.lds.debug @@ -107,9 +107,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/stx/stxxtc/u-boot.lds b/board/stx/stxxtc/u-boot.lds index a949e4f592..cdc1fdac2c 100644 --- a/board/stx/stxxtc/u-boot.lds +++ b/board/stx/stxxtc/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/stx/stxxtc/u-boot.lds.debug b/board/stx/stxxtc/u-boot.lds.debug index a001f3fd87..900da64859 100644 --- a/board/stx/stxxtc/u-boot.lds.debug +++ b/board/stx/stxxtc/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/svm_sc8xx/u-boot.lds b/board/svm_sc8xx/u-boot.lds index c65f0228c3..163587512b 100644 --- a/board/svm_sc8xx/u-boot.lds +++ b/board/svm_sc8xx/u-boot.lds @@ -83,9 +83,11 @@ SECTIONS . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/sx1/Makefile b/board/sx1/Makefile deleted file mode 100644 index 292459f254..0000000000 --- a/board/sx1/Makefile +++ /dev/null @@ -1,45 +0,0 @@ -# -# (C) Copyright 2004-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := sx1.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/sx1/config.mk b/board/sx1/config.mk deleted file mode 100644 index 441bea2a03..0000000000 --- a/board/sx1/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# (C) Copyright 2004 -# Wolfgang Denk, DENX Software Engineering, <wd@denx.de> -# -# SX1 board with OMAP1510 (ARM925T) cpu -# see http://www.ti.com/ for more information on Texas Insturments -# -# SX1 has 1 bank of 256 MB SDRAM -# Physical Address: -# 1000'0000 to 2000'0000 -# -# -# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 (mem base + reserved) -# -# we load ourself to 1108'0000 -# -# - -CONFIG_SYS_TEXT_BASE = 0x11080000 diff --git a/board/sx1/lowlevel_init.S b/board/sx1/lowlevel_init.S deleted file mode 100644 index c1a811aa8e..0000000000 --- a/board/sx1/lowlevel_init.S +++ /dev/null @@ -1,397 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * - * -- Some bits of code used from rrload's head_OMAP1510.s -- - * Copyright (C) 2002 RidgeRun, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> - -#if defined(CONFIG_OMAP1510) -#include <./configs/omap1510.h> -#endif - -#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK)) - - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ - -.globl lowlevel_init -lowlevel_init: - - /* - * Configure 1510 pins functions to match our board. - */ - ldr r0, REG_PULL_DWN_CTRL_0 - ldr r1, VAL_PULL_DWN_CTRL_0 - str r1, [r0] - ldr r0, REG_PULL_DWN_CTRL_1 - ldr r1, VAL_PULL_DWN_CTRL_1 - str r1, [r0] - ldr r0, REG_PULL_DWN_CTRL_2 - ldr r1, VAL_PULL_DWN_CTRL_2 - str r1, [r0] - ldr r0, REG_PULL_DWN_CTRL_3 - ldr r1, VAL_PULL_DWN_CTRL_3 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_4 - ldr r1, VAL_FUNC_MUX_CTRL_4 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_5 - ldr r1, VAL_FUNC_MUX_CTRL_5 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_6 - ldr r1, VAL_FUNC_MUX_CTRL_6 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_7 - ldr r1, VAL_FUNC_MUX_CTRL_7 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_8 - ldr r1, VAL_FUNC_MUX_CTRL_8 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_9 - ldr r1, VAL_FUNC_MUX_CTRL_9 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_A - ldr r1, VAL_FUNC_MUX_CTRL_A - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_B - ldr r1, VAL_FUNC_MUX_CTRL_B - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_C - ldr r1, VAL_FUNC_MUX_CTRL_C - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_D - ldr r1, VAL_FUNC_MUX_CTRL_D - str r1, [r0] - ldr r0, REG_VOLTAGE_CTRL_0 - ldr r1, VAL_VOLTAGE_CTRL_0 - str r1, [r0] - ldr r0, REG_TEST_DBG_CTRL_0 - ldr r1, VAL_TEST_DBG_CTRL_0 - str r1, [r0] - ldr r0, REG_MOD_CONF_CTRL_0 - ldr r1, VAL_MOD_CONF_CTRL_0 - str r1, [r0] - - /* Move to 1510 mode */ - ldr r0, REG_COMP_MODE_CTRL_0 - ldr r1, VAL_COMP_MODE_CTRL_0 - str r1, [r0] - - /* Set up Traffic Ctlr*/ - ldr r0, REG_TC_IMIF_PRIO - mov r1, #0x0 - str r1, [r0] - ldr r0, REG_TC_EMIFS_PRIO - str r1, [r0] - ldr r0, REG_TC_EMIFF_PRIO - str r1, [r0] - - ldr r0, REG_TC_EMIFS_CONFIG - ldr r1, [r0] - bic r1, r1, #0x08 /* clear the global power-down enable PDE bit */ - bic r1, r1, #0x01 /* write protect flash by clearing the WP bit */ - str r1, [r0] /* EMIFS GlB Configuration. (value 0x12 most likely) */ - - ldr r0, _GPIO_PIN_CONTROL_REG - mov r1,#0 - orr r1, r1, #0x0001 /* M_PCM_SYNC */ - orr r1, r1, #0x4000 /* IPC_ACTIVE */ - strh r1,[r0] - - ldr r0, _GPIO_DIR_CONTROL_REG - mov r1,#0 - bic r1, r1, #0x0001 /* M_PCM_SYNC */ - bic r1, r1, #0x4000 /* IPC_ACTIVE */ - strh r1,[r0] - - ldr r0, _GPIO_DATA_OUTPUT_REG - mov r1,#0 - bic r1, r1, #0x0001 /* M_PCM_SYNC */ - orr r1, r1, #0x4000 /* IPC_ACTIVE */ - strh r1,[r0] - - /* Setup some clock domains */ - ldr r1, =OMAP1510_CLKS - ldr r0, REG_ARM_IDLECT2 - strh r1, [r0] /* CLKM, Clock domain control. */ - - mov r1, #0x01 /* PER_EN bit */ - ldr r0, REG_ARM_RSTCT2 - strh r1, [r0] /* CLKM; Peripheral reset. */ - - /* Set CLKM to Sync-Scalable */ - /* I supposidly need to enable the dsp clock before switching */ - mov r1, #0x1000 - ldr r0, REG_ARM_SYSST - strh r1, [r0] - mov r0, #0x400 -1: - subs r0, r0, #0x1 /* wait for any bubbles to finish */ - bne 1b - - ldr r1, VAL_ARM_CKCTL /* use 12Mhz ref, PER must be <= 50Mhz so /2 */ - ldr r0, REG_ARM_CKCTL - strh r1, [r0] - - /* setup DPLL 1 */ - ldr r1, VAL_DPLL1_CTL - ldr r0, REG_DPLL1_CTL - strh r1, [r0] - ands r1, r1, #0x10 /* Check if PLL is enabled. */ - beq lock_end /* Do not look for lock if BYPASS selected */ -2: - ldrh r1, [r0] - ands r1, r1, #0x01 /* Check the LOCK bit. */ - beq 2b /* ...loop until bit goes hi. */ -lock_end: - - /* Set memory timings corresponding to the new clock speed */ - - /* Check execution location to determine current execution location - * and branch to appropriate initialization code. - */ - mov r0, #0x10000000 /* Load physical SDRAM base. */ - mov r1, pc /* Get current execution location. */ - cmp r1, r0 /* Compare. */ - bge skip_sdram /* Skip over EMIF-fast initialization if running from SDRAM. */ - - /* - * Delay for SDRAM initialization. - */ - mov r3, #0x1800 /* value should be checked */ -3: - subs r3, r3, #0x1 /* Decrement count */ - bne 3b - - /* - * Set SDRAM control values. Disable refresh before MRS command. - */ - ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG /* get good value */ - bic r3, r0, #0xC /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */ - orr r3, r3, #0x8000000 /* (BIT27) Disable CLK when Power down or Self-Refresh */ - orr r3, r3, #0x4000000 /* BIT26 Power Down Enable */ - ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */ - str r3, [r2] /* Store the passed value with AR disabled. */ - - ldr r1, VAL_TC_EMIFF_MRS /* get MRS value */ - ldr r2, REG_TC_EMIFF_MRS /* Point to MRS register. */ - str r1, [r2] /* Store the passed value.*/ - - ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */ - str r0, [r2] /* Store the passed value. */ - - /* - * Delay for SDRAM initialization. - */ - mov r3, #0x1800 -4: - subs r3, r3, #1 /* Decrement count. */ - bne 4b - -skip_sdram: - - /* slow interface */ - ldr r1, VAL_TC_EMIFS_CS0_CONFIG - ldr r0, REG_TC_EMIFS_CS0_CONFIG - str r1, [r0] /* Chip Select 0 */ - ldr r1, VAL_TC_EMIFS_CS1_CONFIG - ldr r0, REG_TC_EMIFS_CS1_CONFIG - str r1, [r0] /* Chip Select 1 */ - ldr r1, VAL_TC_EMIFS_CS2_CONFIG - ldr r0, REG_TC_EMIFS_CS2_CONFIG - str r1, [r0] /* Chip Select 2 */ - ldr r1, VAL_TC_EMIFS_CS3_CONFIG - ldr r0, REG_TC_EMIFS_CS3_CONFIG - str r1, [r0] /* Chip Select 3 */ - - /* back to arch calling code */ - mov pc, lr - -/* the literal pools origin */ - .ltorg - -/* OMAP configuration registers */ -REG_FUNC_MUX_CTRL_0: /* 32 bits */ - .word 0xfffe1000 -REG_FUNC_MUX_CTRL_1: /* 32 bits */ - .word 0xfffe1004 -REG_FUNC_MUX_CTRL_2: /* 32 bits */ - .word 0xfffe1008 -REG_COMP_MODE_CTRL_0: /* 32 bits */ - .word 0xfffe100c -REG_FUNC_MUX_CTRL_3: /* 32 bits */ - .word 0xfffe1010 -REG_FUNC_MUX_CTRL_4: /* 32 bits */ - .word 0xfffe1014 -REG_FUNC_MUX_CTRL_5: /* 32 bits */ - .word 0xfffe1018 -REG_FUNC_MUX_CTRL_6: /* 32 bits */ - .word 0xfffe101c -REG_FUNC_MUX_CTRL_7: /* 32 bits */ - .word 0xfffe1020 -REG_FUNC_MUX_CTRL_8: /* 32 bits */ - .word 0xfffe1024 -REG_FUNC_MUX_CTRL_9: /* 32 bits */ - .word 0xfffe1028 -REG_FUNC_MUX_CTRL_A: /* 32 bits */ - .word 0xfffe102C -REG_FUNC_MUX_CTRL_B: /* 32 bits */ - .word 0xfffe1030 -REG_FUNC_MUX_CTRL_C: /* 32 bits */ - .word 0xfffe1034 -REG_FUNC_MUX_CTRL_D: /* 32 bits */ - .word 0xfffe1038 -REG_PULL_DWN_CTRL_0: /* 32 bits */ - .word 0xfffe1040 -REG_PULL_DWN_CTRL_1: /* 32 bits */ - .word 0xfffe1044 -REG_PULL_DWN_CTRL_2: /* 32 bits */ - .word 0xfffe1048 -REG_PULL_DWN_CTRL_3: /* 32 bits */ - .word 0xfffe104c -REG_VOLTAGE_CTRL_0: /* 32 bits */ - .word 0xfffe1060 -REG_TEST_DBG_CTRL_0: /* 32 bits */ - .word 0xfffe1070 -REG_MOD_CONF_CTRL_0: /* 32 bits */ - .word 0xfffe1080 -REG_TC_IMIF_PRIO: /* 32 bits */ - .word 0xfffecc00 -REG_TC_EMIFS_PRIO: /* 32 bits */ - .word 0xfffecc04 -REG_TC_EMIFF_PRIO: /* 32 bits */ - .word 0xfffecc08 -REG_TC_EMIFS_CONFIG: /* 32 bits */ - .word 0xfffecc0c -REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */ - .word 0xfffecc10 -REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */ - .word 0xfffecc14 -REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */ - .word 0xfffecc18 -REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */ - .word 0xfffecc1c -REG_TC_EMIFF_SDRAM_CONFIG: /* 32 bits */ - .word 0xfffecc20 -REG_TC_EMIFF_MRS: /* 32 bits */ - .word 0xfffecc24 -/* MPU clock/reset/power mode control registers */ -REG_ARM_CKCTL: /* 16 bits */ - .word 0xfffece00 -REG_ARM_IDLECT2: /* 16 bits */ - .word 0xfffece08 -REG_ARM_RSTCT2: /* 16 bits */ - .word 0xfffece14 -REG_ARM_SYSST: /* 16 bits */ - .word 0xfffece18 -/* DPLL control registers */ -REG_DPLL1_CTL: /* 16 bits */ - .word 0xfffecf00 -/* identification code register */ -REG_IDCODE: /* 32 bits */ - .word 0xfffed404 - -/* SX1 specific */ -_GPIO_PIN_CONTROL_REG: - .word GPIO_PIN_CONTROL_REG -_GPIO_DIR_CONTROL_REG: - .word GPIO_DIR_CONTROL_REG -_GPIO_DATA_OUTPUT_REG: - .word GPIO_DATA_OUTPUT_REG - -VAL_COMP_MODE_CTRL_0: - .word 0x0000eaef -VAL_FUNC_MUX_CTRL_4: - .word 0x00000000 -VAL_FUNC_MUX_CTRL_5: - .word 0x00000000 -VAL_FUNC_MUX_CTRL_6: - .word 0x00000001 -VAL_FUNC_MUX_CTRL_7: - .word 0x00001000 -VAL_FUNC_MUX_CTRL_8: - .word 0x00001240 /*[Knoller] Value of Symbian Image Wing B2*/ -VAL_FUNC_MUX_CTRL_9: - .word 0x00201008 -VAL_FUNC_MUX_CTRL_A: - .word 0x00001000 -VAL_FUNC_MUX_CTRL_B: - .word 0x00000000 -VAL_FUNC_MUX_CTRL_C: - .word 0x09008001 /*[Knoller] Value of Symbian Image Wing B2*/ -VAL_FUNC_MUX_CTRL_D: - .word 0x00000000 -VAL_PULL_DWN_CTRL_0: - .word 0xfffeffff -VAL_PULL_DWN_CTRL_1: - .word 0xd1ffffec -VAL_PULL_DWN_CTRL_2: - .word 0xffa80c5b -VAL_PULL_DWN_CTRL_3: - .word 0xffffc0fe -VAL_VOLTAGE_CTRL_0: - .word 0x00000007 -VAL_TEST_DBG_CTRL_0: - /* The OMAP5910 TRM says this register must be 0, but HelenConfRegs - * says to write a 7. Don't know what the right thing is to do, so - * I'm leaving it at 7 since that's what was already here. - */ - .word 0x00000007 -VAL_MOD_CONF_CTRL_0: - .word 0x0da20000 /*[Knoller] Value of Symbian Image Wing B2*/ - -VAL_ARM_CKCTL: - .word 0x010D - -VAL_DPLL1_CTL: - .word 0x3A33 /*[Hertle] Value of Symbian Image*/ - -VAL_TC_EMIFS_CS1_CONFIG_PRELIM: - .word 0x00001149 - -VAL_TC_EMIFS_CS2_CONFIG_PRELIM: - .word 0x00004158 - -VAL_TC_EMIFS_CS0_CONFIG: - .word 0x00213090 /*[Knoller] Value of Symbian Image Wing B2*/ - -VAL_TC_EMIFS_CS1_CONFIG: - .word 0x00215070 /*[Knoller] Value of Symbian Image Wing B2*/ - -VAL_TC_EMIFS_CS2_CONFIG: - .word 0x00001139 /*[Knoller] Value of Symbian Image Wing B2*/ - -VAL_TC_EMIFS_CS3_CONFIG: - .word 0x00001139 /*[Knoller] Value of Symbian Image Wing B2*/ - -VAL_TC_EMIFF_SDRAM_CONFIG: - .word 0x0105f0b4 /*[Knoller] Value of Symbian Image Wing B2*/ - - -VAL_TC_EMIFF_MRS: - .word 0x00000027 /*[Knoller] Value of Symbian Image Wing B2*/ diff --git a/board/sx1/sx1.c b/board/sx1/sx1.c deleted file mode 100644 index aaef76e713..0000000000 --- a/board/sx1/sx1.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> - -DECLARE_GLOBAL_DATA_PTR; - -static void flash__init (void); -static void ether__init (void); - -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* arch number of SX1 Board */ - gd->bd->bi_arch_number = MACH_TYPE_SX1; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x10000100; - -/* kk - this speeds up your boot a quite a bit. However to make it - * work, you need make sure your kernel startup flush bug is fixed. - * ... rkw ... - */ - icache_enable (); - - flash__init (); - ether__init (); - return 0; -} - - -int misc_init_r (void) -{ - /* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */ - /* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */ - - /* setup gpio direction to match board (no floats!) */ - /**gdir = 0xCFF9; */ - /**mdir = 0x103F; */ - - return (0); -} - -/****************************** - Routine: - Description: -******************************/ -static void flash__init (void) -{ -#define CS0_CHIP_SELECT_REG 0xfffecc10 -#define CS3_CHIP_SELECT_REG 0xfffecc1c -#define EMIFS_GlB_Config_REG 0xfffecc0c - - unsigned int regval; - - regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG); - regval = regval | 0x0001; /* Turn off write protection for flash devices. */ - if (regval & 0x0002) { - regval = regval & 0xfffd; /* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */ - /* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */ - /* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */ - /* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */ - } - *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval; -} - - -/****************************** - Routine: - Description: -******************************/ -static void ether__init (void) -{ -#define ETH_CONTROL_REG 0x0800000b - /* take the Ethernet controller out of reset and wait - * for the EEPROM load to complete. - */ - *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01; - udelay (3); -} - - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c index ecb9b6c413..9622a81280 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.c +++ b/board/teejet/mt_ventoux/mt_ventoux.c @@ -45,6 +45,8 @@ DECLARE_GLOBAL_DATA_PTR; #define BUZZER 140 #define SPEAKER 141 +#define USB1_PWR 127 +#define USB2_PWR 149 #ifndef CONFIG_FPGA #error "The Teejet mt_ventoux must have CONFIG_FPGA enabled" @@ -247,6 +249,12 @@ int board_init(void) gpio_direction_output(BUZZER, 0); gpio_direction_output(SPEAKER, 0); + /* Activate USB power */ + gpio_request(USB1_PWR, "USB1_PWR"); + gpio_request(USB2_PWR, "USB2_PWR"); + gpio_direction_output(USB1_PWR, 1); + gpio_direction_output(USB2_PWR, 1); + return 0; } diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile index ca50eef613..67a87a1aaf 100644 --- a/board/ti/am335x/Makefile +++ b/board/ti/am335x/Makefile @@ -22,6 +22,7 @@ ifdef CONFIG_SPL_BUILD COBJS := mux.o endif +COBJS += board.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c new file mode 100644 index 0000000000..b56a801a4d --- /dev/null +++ b/board/ti/am335x/board.c @@ -0,0 +1,418 @@ +/* + * board.c + * + * Board functions for TI AM335X based boards + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include "board.h" + +DECLARE_GLOBAL_DATA_PTR; + +static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; +#ifdef CONFIG_SPL_BUILD +static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; +#endif + +/* MII mode defines */ +#define MII_MODE_ENABLE 0x0 +#define RGMII_MODE_ENABLE 0xA + +/* GPIO that controls power to DDR on EVM-SK */ +#define GPIO_DDR_VTT_EN 7 + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +static struct am335x_baseboard_id __attribute__((section (".data"))) header; + +static inline int board_is_bone(void) +{ + return !strncmp(header.name, "A335BONE", HDR_NAME_LEN); +} + +static inline int board_is_bone_lt(void) +{ + return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN); +} + +static inline int board_is_evm_sk(void) +{ + return !strncmp("A335X_SK", header.name, HDR_NAME_LEN); +} + +static inline int board_is_idk(void) +{ + return !strncmp(header.config, "SKU#02", 6); +} + +/* + * Read header information from EEPROM into global structure. + */ +static int read_eeprom(void) +{ + /* Check if baseboard eeprom is available */ + if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { + puts("Could not probe the EEPROM; something fundamentally " + "wrong on the I2C bus.\n"); + return -ENODEV; + } + + /* read the eeprom using i2c */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header, + sizeof(header))) { + puts("Could not read the EEPROM; something fundamentally" + " wrong on the I2C bus.\n"); + return -EIO; + } + + if (header.magic != 0xEE3355AA) { + /* + * read the eeprom using i2c again, + * but use only a 1 byte address + */ + if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, + (uchar *)&header, sizeof(header))) { + puts("Could not read the EEPROM; something " + "fundamentally wrong on the I2C bus.\n"); + return -EIO; + } + + if (header.magic != 0xEE3355AA) { + printf("Incorrect magic number (0x%x) in EEPROM\n", + header.magic); + return -EINVAL; + } + } + + return 0; +} + +/* UART Defines */ +#ifdef CONFIG_SPL_BUILD +#define UART_RESET (0x1 << 1) +#define UART_CLK_RUNNING_MASK 0x1 +#define UART_SMART_IDLE_EN (0x1 << 0x3) + +static void rtc32k_enable(void) +{ + struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE; + + /* + * Unlock the RTC's registers. For more details please see the + * RTC_SS section of the TRM. In order to unlock we need to + * write these specific values (keys) in this order. + */ + writel(0x83e70b13, &rtc->kick0r); + writel(0x95a4f1e0, &rtc->kick1r); + + /* Enable the RTC 32K OSC by setting bits 3 and 6. */ + writel((1 << 3) | (1 << 6), &rtc->osc); +} + +static const struct ddr_data ddr2_data = { + .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) | + (MT47H128M16RT25E_RD_DQS<<20) | + (MT47H128M16RT25E_RD_DQS<<10) | + (MT47H128M16RT25E_RD_DQS<<0)), + .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) | + (MT47H128M16RT25E_WR_DQS<<20) | + (MT47H128M16RT25E_WR_DQS<<10) | + (MT47H128M16RT25E_WR_DQS<<0)), + .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) | + (MT47H128M16RT25E_PHY_WRLVL<<20) | + (MT47H128M16RT25E_PHY_WRLVL<<10) | + (MT47H128M16RT25E_PHY_WRLVL<<0)), + .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) | + (MT47H128M16RT25E_PHY_GATELVL<<20) | + (MT47H128M16RT25E_PHY_GATELVL<<10) | + (MT47H128M16RT25E_PHY_GATELVL<<0)), + .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) | + (MT47H128M16RT25E_PHY_FIFO_WE<<20) | + (MT47H128M16RT25E_PHY_FIFO_WE<<10) | + (MT47H128M16RT25E_PHY_FIFO_WE<<0)), + .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) | + (MT47H128M16RT25E_PHY_WR_DATA<<20) | + (MT47H128M16RT25E_PHY_WR_DATA<<10) | + (MT47H128M16RT25E_PHY_WR_DATA<<0)), + .datauserank0delay = MT47H128M16RT25E_PHY_RANK0_DELAY, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +static const struct cmd_control ddr2_cmd_ctrl_data = { + .cmd0csratio = MT47H128M16RT25E_RATIO, + .cmd0dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, + .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT, + + .cmd1csratio = MT47H128M16RT25E_RATIO, + .cmd1dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, + .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT, + + .cmd2csratio = MT47H128M16RT25E_RATIO, + .cmd2dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF, + .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT, +}; + +static const struct emif_regs ddr2_emif_reg_data = { + .sdram_config = MT47H128M16RT25E_EMIF_SDCFG, + .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF, + .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1, + .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2, + .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3, + .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY, +}; + +static const struct ddr_data ddr3_data = { + .datardsratio0 = MT41J128MJT125_RD_DQS, + .datawdsratio0 = MT41J128MJT125_WR_DQS, + .datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE, + .datawrsratio0 = MT41J128MJT125_PHY_WR_DATA, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +static const struct cmd_control ddr3_cmd_ctrl_data = { + .cmd0csratio = MT41J128MJT125_RATIO, + .cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF, + .cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT, + + .cmd1csratio = MT41J128MJT125_RATIO, + .cmd1dldiff = MT41J128MJT125_DLL_LOCK_DIFF, + .cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT, + + .cmd2csratio = MT41J128MJT125_RATIO, + .cmd2dldiff = MT41J128MJT125_DLL_LOCK_DIFF, + .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_emif_reg_data = { + .sdram_config = MT41J128MJT125_EMIF_SDCFG, + .ref_ctrl = MT41J128MJT125_EMIF_SDREF, + .sdram_tim1 = MT41J128MJT125_EMIF_TIM1, + .sdram_tim2 = MT41J128MJT125_EMIF_TIM2, + .sdram_tim3 = MT41J128MJT125_EMIF_TIM3, + .zq_config = MT41J128MJT125_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY, +}; +#endif + +/* + * early system init of muxing and clocks. + */ +void s_init(void) +{ + /* WDT1 is already running when the bootloader gets control + * Disable it to avoid "random" resets + */ + writel(0xAAAA, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; + writel(0x5555, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; + +#ifdef CONFIG_SPL_BUILD + /* Setup the PLLs and the clocks for the peripherals */ + pll_init(); + + /* Enable RTC32K clock */ + rtc32k_enable(); + + /* UART softreset */ + u32 regVal; + +#ifdef CONFIG_SERIAL1 + enable_uart0_pin_mux(); +#endif /* CONFIG_SERIAL1 */ +#ifdef CONFIG_SERIAL2 + enable_uart1_pin_mux(); +#endif /* CONFIG_SERIAL2 */ +#ifdef CONFIG_SERIAL3 + enable_uart2_pin_mux(); +#endif /* CONFIG_SERIAL3 */ +#ifdef CONFIG_SERIAL4 + enable_uart3_pin_mux(); +#endif /* CONFIG_SERIAL4 */ +#ifdef CONFIG_SERIAL5 + enable_uart4_pin_mux(); +#endif /* CONFIG_SERIAL5 */ +#ifdef CONFIG_SERIAL6 + enable_uart5_pin_mux(); +#endif /* CONFIG_SERIAL6 */ + + regVal = readl(&uart_base->uartsyscfg); + regVal |= UART_RESET; + writel(regVal, &uart_base->uartsyscfg); + while ((readl(&uart_base->uartsyssts) & + UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK) + ; + + /* Disable smart idle */ + regVal = readl(&uart_base->uartsyscfg); + regVal |= UART_SMART_IDLE_EN; + writel(regVal, &uart_base->uartsyscfg); + + gd = &gdata; + + preloader_console_init(); + + /* Initalize the board header */ + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom() < 0) + puts("Could not get board ID.\n"); + + enable_board_pin_mux(&header); + if (board_is_evm_sk()) { + /* + * EVM SK 1.2A and later use gpio0_7 to enable DDR3. + * This is safe enough to do on older revs. + */ + gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en"); + gpio_direction_output(GPIO_DDR_VTT_EN, 1); + } + + if (board_is_evm_sk() || board_is_bone_lt()) + config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data, + &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data); + else + config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data, + &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data); +#endif +} + +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (read_eeprom() < 0) + puts("Could not get board ID.\n"); + + gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + + return 0; +} + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + char safe_string[HDR_NAME_LEN + 1]; + + /* Now set variables based on the header. */ + strncpy(safe_string, (char *)header.name, sizeof(header.name)); + safe_string[sizeof(header.name)] = 0; + setenv("board_name", safe_string); + + strncpy(safe_string, (char *)header.version, sizeof(header.version)); + safe_string[sizeof(header.version)] = 0; + setenv("board_rev", safe_string); +#endif + + return 0; +} +#endif + +#ifdef CONFIG_DRIVER_TI_CPSW +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 0, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_id = 1, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = AM335X_CPSW_MDIO_BASE, + .cpsw_base = AM335X_CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +int board_eth_init(bd_t *bis) +{ + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + + if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + debug("<ethaddr> not set. Reading from E-fuse\n"); + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + else + return -1; + } + + if (board_is_bone() || board_is_bone_lt() || board_is_idk()) { + writel(MII_MODE_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = + PHY_INTERFACE_MODE_MII; + } else { + writel(RGMII_MODE_ENABLE, &cdev->miisel); + cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = + PHY_INTERFACE_MODE_RGMII; + } + + return cpsw_register(&cpsw_data); +} +#endif diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h new file mode 100644 index 0000000000..48e112e230 --- /dev/null +++ b/board/ti/am335x/board.h @@ -0,0 +1,54 @@ +/* + * board.h + * + * TI AM335x boards information header + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * TI AM335x parts define a system EEPROM that defines certain sub-fields. + * We use these fields to in turn see what board we are on, and what + * that might require us to set or not set. + */ +#define HDR_NO_OF_MAC_ADDR 3 +#define HDR_ETH_ALEN 6 +#define HDR_NAME_LEN 8 + +struct am335x_baseboard_id { + unsigned int magic; + char name[HDR_NAME_LEN]; + char version[4]; + char serial[12]; + char config[32]; + char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN]; +}; + +/* + * We have three pin mux functions that must exist. We must be able to enable + * uart0, for initial output and i2c0 to read the main EEPROM. We then have a + * main pinmux function that can be overridden to enable all other pinmux that + * is required on the board. + */ +void enable_uart0_pin_mux(void); +void enable_uart1_pin_mux(void); +void enable_uart2_pin_mux(void); +void enable_uart3_pin_mux(void); +void enable_uart4_pin_mux(void); +void enable_uart5_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(struct am335x_baseboard_id *header); +#endif diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 80becd5c7a..8437ef515a 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -16,246 +16,44 @@ #include <common.h> #include <asm/arch/sys_proto.h> #include <asm/arch/hardware.h> +#include <asm/arch/mux.h> #include <asm/io.h> #include <i2c.h> +#include "board.h" -#define MUX_CFG(value, offset) \ - __raw_writel(value, (CTRL_BASE + offset)); +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ + {-1}, +}; -/* PAD Control Fields */ -#define SLEWCTRL (0x1 << 6) -#define RXACTIVE (0x1 << 5) -#define PULLUP_EN (0x1 << 4) /* Pull UP Selection */ -#define PULLUDEN (0x0 << 3) /* Pull up enabled */ -#define PULLUDDIS (0x1 << 3) /* Pull up disabled */ -#define MODE(val) val /* used for Readability */ +static struct module_pin_mux uart1_pin_mux[] = { + {OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART1_RXD */ + {OFFSET(uart1_txd), (MODE(0) | PULLUDEN)}, /* UART1_TXD */ + {-1}, +}; -/* - * PAD CONTROL OFFSETS - * Field names corresponds to the pad signal name - */ -struct pad_signals { - int gpmc_ad0; - int gpmc_ad1; - int gpmc_ad2; - int gpmc_ad3; - int gpmc_ad4; - int gpmc_ad5; - int gpmc_ad6; - int gpmc_ad7; - int gpmc_ad8; - int gpmc_ad9; - int gpmc_ad10; - int gpmc_ad11; - int gpmc_ad12; - int gpmc_ad13; - int gpmc_ad14; - int gpmc_ad15; - int gpmc_a0; - int gpmc_a1; - int gpmc_a2; - int gpmc_a3; - int gpmc_a4; - int gpmc_a5; - int gpmc_a6; - int gpmc_a7; - int gpmc_a8; - int gpmc_a9; - int gpmc_a10; - int gpmc_a11; - int gpmc_wait0; - int gpmc_wpn; - int gpmc_be1n; - int gpmc_csn0; - int gpmc_csn1; - int gpmc_csn2; - int gpmc_csn3; - int gpmc_clk; - int gpmc_advn_ale; - int gpmc_oen_ren; - int gpmc_wen; - int gpmc_be0n_cle; - int lcd_data0; - int lcd_data1; - int lcd_data2; - int lcd_data3; - int lcd_data4; - int lcd_data5; - int lcd_data6; - int lcd_data7; - int lcd_data8; - int lcd_data9; - int lcd_data10; - int lcd_data11; - int lcd_data12; - int lcd_data13; - int lcd_data14; - int lcd_data15; - int lcd_vsync; - int lcd_hsync; - int lcd_pclk; - int lcd_ac_bias_en; - int mmc0_dat3; - int mmc0_dat2; - int mmc0_dat1; - int mmc0_dat0; - int mmc0_clk; - int mmc0_cmd; - int mii1_col; - int mii1_crs; - int mii1_rxerr; - int mii1_txen; - int mii1_rxdv; - int mii1_txd3; - int mii1_txd2; - int mii1_txd1; - int mii1_txd0; - int mii1_txclk; - int mii1_rxclk; - int mii1_rxd3; - int mii1_rxd2; - int mii1_rxd1; - int mii1_rxd0; - int rmii1_refclk; - int mdio_data; - int mdio_clk; - int spi0_sclk; - int spi0_d0; - int spi0_d1; - int spi0_cs0; - int spi0_cs1; - int ecap0_in_pwm0_out; - int uart0_ctsn; - int uart0_rtsn; - int uart0_rxd; - int uart0_txd; - int uart1_ctsn; - int uart1_rtsn; - int uart1_rxd; - int uart1_txd; - int i2c0_sda; - int i2c0_scl; - int mcasp0_aclkx; - int mcasp0_fsx; - int mcasp0_axr0; - int mcasp0_ahclkr; - int mcasp0_aclkr; - int mcasp0_fsr; - int mcasp0_axr1; - int mcasp0_ahclkx; - int xdma_event_intr0; - int xdma_event_intr1; - int nresetin_out; - int porz; - int nnmi; - int osc0_in; - int osc0_out; - int rsvd1; - int tms; - int tdi; - int tdo; - int tck; - int ntrst; - int emu0; - int emu1; - int osc1_in; - int osc1_out; - int pmic_power_en; - int rtc_porz; - int rsvd2; - int ext_wakeup; - int enz_kaldo_1p8v; - int usb0_dm; - int usb0_dp; - int usb0_ce; - int usb0_id; - int usb0_vbus; - int usb0_drvvbus; - int usb1_dm; - int usb1_dp; - int usb1_ce; - int usb1_id; - int usb1_vbus; - int usb1_drvvbus; - int ddr_resetn; - int ddr_csn0; - int ddr_cke; - int ddr_ck; - int ddr_nck; - int ddr_casn; - int ddr_rasn; - int ddr_wen; - int ddr_ba0; - int ddr_ba1; - int ddr_ba2; - int ddr_a0; - int ddr_a1; - int ddr_a2; - int ddr_a3; - int ddr_a4; - int ddr_a5; - int ddr_a6; - int ddr_a7; - int ddr_a8; - int ddr_a9; - int ddr_a10; - int ddr_a11; - int ddr_a12; - int ddr_a13; - int ddr_a14; - int ddr_a15; - int ddr_odt; - int ddr_d0; - int ddr_d1; - int ddr_d2; - int ddr_d3; - int ddr_d4; - int ddr_d5; - int ddr_d6; - int ddr_d7; - int ddr_d8; - int ddr_d9; - int ddr_d10; - int ddr_d11; - int ddr_d12; - int ddr_d13; - int ddr_d14; - int ddr_d15; - int ddr_dqm0; - int ddr_dqm1; - int ddr_dqs0; - int ddr_dqsn0; - int ddr_dqs1; - int ddr_dqsn1; - int ddr_vref; - int ddr_vtp; - int ddr_strben0; - int ddr_strben1; - int ain7; - int ain6; - int ain5; - int ain4; - int ain3; - int ain2; - int ain1; - int ain0; - int vrefp; - int vrefn; +static struct module_pin_mux uart2_pin_mux[] = { + {OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */ + {OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */ + {-1}, }; -struct module_pin_mux { - short reg_offset; - unsigned char val; +static struct module_pin_mux uart3_pin_mux[] = { + {OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */ + {OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */ + {-1}, }; -/* Pad control register offset */ -#define PAD_CTRL_BASE 0x800 -#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \ - (PAD_CTRL_BASE))->x) +static struct module_pin_mux uart4_pin_mux[] = { + {OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */ + {OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */ + {-1}, +}; -static struct module_pin_mux uart0_pin_mux[] = { - {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ - {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ +static struct module_pin_mux uart5_pin_mux[] = { + {OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)}, /* UART5_RXD */ + {OFFSET(lcd_data8), (MODE(4) | PULLUDEN)}, /* UART5_TXD */ {-1}, }; @@ -271,6 +69,17 @@ static struct module_pin_mux mmc0_pin_mux[] = { {-1}, }; +static struct module_pin_mux mmc0_no_cd_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ + {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ + {-1}, +}; + static struct module_pin_mux mmc0_pin_mux_sk_evm[] = { {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ @@ -362,25 +171,35 @@ static struct module_pin_mux mii1_pin_mux[] = { {-1}, }; -/* - * Configure the pin mux for the module - */ -static void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux) +void enable_uart0_pin_mux(void) { - int i; + configure_module_pin_mux(uart0_pin_mux); +} - if (!mod_pin_mux) - return; +void enable_uart1_pin_mux(void) +{ + configure_module_pin_mux(uart1_pin_mux); +} - for (i = 0; mod_pin_mux[i].reg_offset != -1; i++) - MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset); +void enable_uart2_pin_mux(void) +{ + configure_module_pin_mux(uart2_pin_mux); } -void enable_uart0_pin_mux(void) +void enable_uart3_pin_mux(void) { - configure_module_pin_mux(uart0_pin_mux); + configure_module_pin_mux(uart3_pin_mux); +} + +void enable_uart4_pin_mux(void) +{ + configure_module_pin_mux(uart4_pin_mux); } +void enable_uart5_pin_mux(void) +{ + configure_module_pin_mux(uart5_pin_mux); +} void enable_i2c0_pin_mux(void) { @@ -442,12 +261,27 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header) configure_module_pin_mux(mmc1_pin_mux); configure_module_pin_mux(spi0_pin_mux); } + } else if (!strncmp(header->config, "SKU#02", 6)) { + /* + * Industrial Motor Control (IDK) + * note: IDK console is on UART3 by default. + * So u-boot mus be build with CONFIG_SERIAL4 and + * CONFIG_CONS_INDEX=4 + */ + configure_module_pin_mux(mii1_pin_mux); + configure_module_pin_mux(mmc0_no_cd_pin_mux); } else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) { /* Starter Kit EVM */ configure_module_pin_mux(i2c1_pin_mux); configure_module_pin_mux(gpio0_7_pin_mux); configure_module_pin_mux(rgmii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux_sk_evm); + } else if (!strncmp(header->name, "A335BNLT", HDR_NAME_LEN)) { + /* Beaglebone LT pinmux */ + configure_module_pin_mux(i2c1_pin_mux); + configure_module_pin_mux(mii1_pin_mux); + configure_module_pin_mux(mmc0_pin_mux); + configure_module_pin_mux(mmc1_pin_mux); } else { puts("Unknown board, cannot configure pinmux."); hang(); diff --git a/board/ti/omap2420h4/omap2420h4.c b/board/ti/omap2420h4/omap2420h4.c index a3983e376b..188e4acc09 100644 --- a/board/ti/omap2420h4/omap2420h4.c +++ b/board/ti/omap2420h4/omap2420h4.c @@ -153,7 +153,7 @@ void wait_for_command_complete(unsigned int wd_base) ******************************************************************/ void ether_init (void) { -#ifdef CONFIG_DRIVER_LAN91C96 +#ifdef CONFIG_LAN91C96 int cnt = 20; __raw_writeb(0x3,OMAP2420_CTRL_BASE+0x10a); /*protect->gpio95 */ diff --git a/board/toradex/colibri_t20-common/colibri_t20-common.c b/board/toradex/colibri_t20-common/colibri_t20-common.c new file mode 100644 index 0000000000..6d5e47d38e --- /dev/null +++ b/board/toradex/colibri_t20-common/colibri_t20-common.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 Lucas Stach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/funcmux.h> +#include <asm/arch/pinmux.h> +#include <asm/arch-tegra/board.h> + +#include "colibri_t20-common.h" + +#ifdef CONFIG_USB_EHCI_TEGRA +void colibri_t20_common_pin_mux_usb(void) +{ + /* module internal USB bus to connect ethernet chipset */ + funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI); + /* ULPI reference clock output */ + pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4); + pinmux_tristate_disable(PINGRP_CDEV2); + /* PHY reset GPIO */ + pinmux_tristate_disable(PINGRP_UAC); + /* VBus GPIO */ + pinmux_tristate_disable(PINGRP_DTE); +} +#endif + +#ifdef CONFIG_TEGRA_NAND +void pin_mux_nand(void) +{ + funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_NDFLASH_KBC_8_BIT); +} +#endif diff --git a/board/toradex/colibri_t20-common/colibri_t20-common.h b/board/toradex/colibri_t20-common/colibri_t20-common.h new file mode 100644 index 0000000000..76dc8608d5 --- /dev/null +++ b/board/toradex/colibri_t20-common/colibri_t20-common.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2012 Lucas Stach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +void colibri_t20_common_pin_mux_usb(void); diff --git a/board/toradex/colibri_t20_iris/Makefile b/board/toradex/colibri_t20_iris/Makefile new file mode 100644 index 0000000000..c138729a48 --- /dev/null +++ b/board/toradex/colibri_t20_iris/Makefile @@ -0,0 +1,40 @@ +# +# (C) Copyright 2012 Lucas Stach +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# + +include $(TOPDIR)/config.mk + +$(shell mkdir -p $(obj)../../nvidia/common) +$(shell mkdir -p $(obj)../colibri_t20-common) + +LIB = $(obj)lib$(BOARD).o + +COBJS := ../../nvidia/common/board.o +COBJS += ../colibri_t20-common/colibri_t20-common.o +COBJS += $(BOARD).o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/toradex/colibri_t20_iris/colibri_t20_iris.c b/board/toradex/colibri_t20_iris/colibri_t20_iris.c new file mode 100644 index 0000000000..e40a98609f --- /dev/null +++ b/board/toradex/colibri_t20_iris/colibri_t20_iris.c @@ -0,0 +1,46 @@ +/* + * Copyright (C) 2012 Lucas Stach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <common.h> +#include <asm/gpio.h> +#include <asm/arch/clock.h> +#include <asm/arch/funcmux.h> +#include <asm/arch/pinmux.h> +#include <asm/arch-tegra/board.h> +#include <asm/arch-tegra/mmc.h> + +#include "../colibri_t20-common/colibri_t20-common.h" + +#ifdef CONFIG_USB_EHCI_TEGRA +void pin_mux_usb(void) +{ + colibri_t20_common_pin_mux_usb(); + + /* USB 1 aka Tegra USB port 3 VBus*/ + pinmux_tristate_disable(PINGRP_SPIG); +} +#endif + +#ifdef CONFIG_TEGRA_MMC +int board_mmc_init(bd_t *bd) +{ + funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT); + pinmux_tristate_disable(PINGRP_GMB); + + tegra_mmc_init(0, 4, -1, GPIO_PC7); + + return 0; +} +#endif diff --git a/board/toradex/dts/tegra20-colibri_t20_iris.dts b/board/toradex/dts/tegra20-colibri_t20_iris.dts new file mode 100644 index 0000000000..c29b43a0ef --- /dev/null +++ b/board/toradex/dts/tegra20-colibri_t20_iris.dts @@ -0,0 +1,38 @@ +/dts-v1/; + +/include/ ARCH_CPU_DTS + +/ { + model = "Toradex Colibri T20"; + compatible = "toradex,t20", "nvidia,tegra20"; + + aliases { + usb0 = "/usb@c5008000"; + usb1 = "/usb@c5000000"; + usb2 = "/usb@c5004000"; + }; + + usb@c5000000 { + dr_mode = "otg"; + }; + + usb@c5004000 { + nvidia,phy-reset-gpio = <&gpio 169 0>; /* PV1 */ + nvidia,vbus-gpio = <&gpio 217 0>; /* PBB1 */ + }; + + usb@c5008000 { + nvidia,vbus-gpio = <&gpio 178 1>; /* PW2 low-active */ + }; + + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 144 0>; /* PS0 */ + nvidia,width = <8>; + nvidia,timing = <15 100 25 80 25 10 15 10 100>; + + nand@0 { + reg = <0>; + compatible = "nand-flash"; + }; + }; +}; diff --git a/board/tqc/tqm8xx/u-boot.lds b/board/tqc/tqm8xx/u-boot.lds index e905c26c6f..e1e1ccd482 100644 --- a/board/tqc/tqm8xx/u-boot.lds +++ b/board/tqc/tqm8xx/u-boot.lds @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000 + * (C) Copyright 2000-2012 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -41,8 +41,6 @@ SECTIONS drivers/net/libnet.o (.text*) drivers/pcmcia/libpcmcia.o (.text.pcmcia_on) drivers/pcmcia/libpcmcia.o (.text.pcmcia_hardware_enable) - drivers/rtc/librtc.o (.text*) - drivers/misc/libmisc.o (.text*) . = DEFINED(env_offset) ? env_offset : .; common/env_embedded.o (.ppcenv*) @@ -81,9 +79,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c index 871e052b04..c3dee8459e 100644 --- a/board/trizepsiv/conxs.c +++ b/board/trizepsiv/conxs.c @@ -34,6 +34,7 @@ #include <common.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa.h> +#include <asm/arch/regs-mmc.h> #include <netdev.h> #include <asm/io.h> @@ -152,3 +153,11 @@ int board_eth_init(bd_t *bis) return dm9000_initialize(bis); } #endif + +#ifdef CONFIG_CMD_MMC +int board_mmc_init(bd_t *bis) +{ + pxa_mmc_register(0); + return 0; +} +#endif diff --git a/board/v37/u-boot.lds b/board/v37/u-boot.lds index e62d53db54..fd2d72e8ae 100644 --- a/board/v37/u-boot.lds +++ b/board/v37/u-boot.lds @@ -66,9 +66,11 @@ SECTIONS PROVIDE (edata = .); . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = .; diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds index 1958c2fb90..20161a46a6 100644 --- a/board/vpac270/u-boot-spl.lds +++ b/board/vpac270/u-boot-spl.lds @@ -57,6 +57,10 @@ SECTIONS *(.data) } + .u_boot_list : { + #include <u-boot.lst> + } + . = ALIGN(4); .rel.dyn : { diff --git a/board/w7o/u-boot.lds.debug b/board/w7o/u-boot.lds.debug index 1c67b301fb..2ce5a9a71c 100644 --- a/board/w7o/u-boot.lds.debug +++ b/board/w7o/u-boot.lds.debug @@ -106,9 +106,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/board/westel/amx860/amx860.c b/board/westel/amx860/amx860.c deleted file mode 100644 index 91dcc0dcb3..0000000000 --- a/board/westel/amx860/amx860.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <config.h> -#include <mpc8xx.h> - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFFFFF - -const uint edo_60ns[] = -{ 0x8ffbec24, 0x0ff3ec04, 0x0cf3ec04, 0x00f3ec04, - 0x00f3ec00, 0x37f7ec47, _NOT_USED_, _NOT_USED_, - 0x8fffec24, 0x0ffbec04, 0x08f3ec04, 0x07f3ec08, - 0x08f3ec04, 0x07f3ec48, 0x08f3ec04, 0x07f3ec48, - 0x08f3ec04, 0x07f3ec48, 0x1ff7ec47, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - 0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x11bfcc47, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - 0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x03afcc4c, - 0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c, - 0x0cafcc00, 0x33bfcc4f, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - 0xc0ffcc84, 0x00ffcc04, 0x07ffcc04, 0x3fffcc06, - 0xffffcc85, 0xffffcc05, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - 0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ }; - -/* ------------------------------------------------------------------------- */ - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - puts ("Board: AMX860\n"); - return 0; -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - /* AMX860: has 4 Mb of 60ns EDO DRAM, so start DRAM at 0 */ - - upmconfig(UPMA, (uint *) edo_60ns, sizeof(edo_60ns)/sizeof(uint)); - -#ifndef CONFIG_AMX_RAM_EXT - memctl->memc_mptpr = 0x0400; /* divide by 16 */ -#else - memctl->memc_mptpr = 0x0200; -#endif - - memctl->memc_mamr = 0x30a21114; - memctl->memc_or2 = 0xffc00800; -#ifndef CONFIG_AMX_RAM_EXT - memctl->memc_br2 = 0x81; - - return (4 << 20); -#else - memctl->memc_or1 = 0xff000800; - memctl->memc_br1 = 0x00000081; - memctl->memc_br2 = 0x01000081; - - return (20 << 20); -#endif -} diff --git a/board/westel/amx860/flash.c b/board/westel/amx860/flash.c deleted file mode 100644 index fe8bce412b..0000000000 --- a/board/westel/amx860/flash.c +++ /dev/null @@ -1,637 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <mpc8xx.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#if defined(CONFIG_ENV_IS_IN_FLASH) -# ifndef CONFIG_ENV_ADDR -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -# endif -# ifndef CONFIG_ENV_SIZE -# define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE -# endif -# ifndef CONFIG_ENV_SECT_SIZE -# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE -# endif -#endif - -/*---------------------------------------------------------------------*/ -#undef DEBUG_FLASH - -#ifdef DEBUG_FLASH -#define DEBUGF(fmt,args...) printf(fmt ,##args) -#else -#define DEBUGF(fmt,args...) -#endif -/*---------------------------------------------------------------------*/ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - unsigned long size_b0, size_b1; - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - /* Static FLASH Bank configuration here - FIXME XXX */ - - DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM); - - size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); - - if (flash_info[0].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", - size_b0, size_b0<<20); - } - -#if defined(FLASH_BASE1_PRELIM) && (FLASH_BASE1_PRELIM != 0) - DEBUGF("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE1_PRELIM); - - size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]); - - if (size_b1 > size_b0) { - printf ("## ERROR: " - "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n", - size_b1, size_b1<<20, - size_b0, size_b0<<20 - ); - flash_info[0].flash_id = FLASH_UNKNOWN; - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[0].sector_count = -1; - flash_info[1].sector_count = -1; - flash_info[0].size = 0; - flash_info[1].size = 0; - return (0); - } -#else - size_b1 = 0; -#endif /* FLASH_BASE1_PRELIM */ - - DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1); - - DEBUGF ("## Before remap: " - "BR0: 0x%08x OR0: 0x%08x " - "BR1: 0x%08x OR1: 0x%08x\n", - memctl->memc_br0, memctl->memc_or0, - memctl->memc_br1, memctl->memc_or1); - - /* Remap FLASH according to real size */ - memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; - - DEBUGF("## BR0: 0x%08x OR0: 0x%08x\n", - memctl->memc_br0, memctl->memc_or0); - - /* Re-do sizing to get full correct info */ - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - - flash_info[0].size = size_b0; - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[0]); -#endif - - if (size_b1) { - memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & OR_AM_MSK); - memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) | - BR_MS_GPCM | BR_V; - - DEBUGF("## BR1: 0x%08x OR1: 0x%08x\n", - memctl->memc_br1, memctl->memc_or1); - - /* Re-do sizing to get full correct info */ - size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0), - &flash_info[1]); - - flash_info[1].size = size_b1; - - flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]); - -# if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[1]); -# endif - -# ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1, - &flash_info[1]); -#endif - } else { -#ifndef CONFIG_AMX_RAM_EXT - memctl->memc_br1 = 0; /* invalidate bank */ - memctl->memc_or1 = 0; /* invalidate bank */ -#endif - - DEBUGF("## DISABLE BR1: 0x%08x OR1: 0x%08x\n", - memctl->memc_br1, memctl->memc_or1); - - flash_info[1].flash_id = FLASH_UNKNOWN; - flash_info[1].sector_count = -1; - flash_info[1].size = 0; - } - - DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1); - - return (size_b0 + size_b1); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) { - /* set sector offsets for uniform sector type */ - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00040000); - } - } else if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n"); - break; - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - /* Write auto select command: read Manufacturer ID */ - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00900090; - - value = addr[0]; - - DEBUGF("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value); - - switch (value) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[1]; /* device ID */ - - DEBUGF("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value); - - switch (value) { - case AMD_ID_F040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV400T: - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV400B: - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case AMD_ID_LV800T: - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV800B: - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case AMD_ID_LV160T: - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ -#if 0 /* enable when device IDs are available */ - case AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - - case AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - } - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x0000C000; - info->start[3] = base + 0x00010000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00020000) - 0x00060000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000C000; - info->start[i--] = base + info->size - 0x00010000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00020000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[2] & 1; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0x00F000F0; /* reset bank */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00800080; - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long*)(info->start[sect]); - addr[0] = 0x00300030; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long*)(info->start[l_sect]); - while ((addr[0] & 0x00800080) != 0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (volatile unsigned long *)info->start[0]; - addr[0] = 0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long*)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0x0555] = 0x00AA00AA; - addr[0x02AA] = 0x00550055; - addr[0x0555] = 0x00A000A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/westel/amx860/u-boot.lds b/board/westel/amx860/u-boot.lds deleted file mode 100644 index 3470b437e8..0000000000 --- a/board/westel/amx860/u-boot.lds +++ /dev/null @@ -1,105 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - net/libnet.o (.text*) - board/westel/amx860/libamx860.o (.text*) - *(.text.*printf) - - . = env_offset; - common/env_embedded.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/westel/amx860/u-boot.lds.debug b/board/westel/amx860/u-boot.lds.debug deleted file mode 100644 index 91d3e67e82..0000000000 --- a/board/westel/amx860/u-boot.lds.debug +++ /dev/null @@ -1,136 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - arch/powerpc/lib/extable.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end__ = . ; - PROVIDE (end = .); -} diff --git a/board/xes/xpedite1000/u-boot.lds.debug b/board/xes/xpedite1000/u-boot.lds.debug index e2e66aec99..c4e5706543 100644 --- a/board/xes/xpedite1000/u-boot.lds.debug +++ b/board/xes/xpedite1000/u-boot.lds.debug @@ -111,9 +111,11 @@ SECTIONS _edata = .; PROVIDE (edata = .); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } __start___ex_table = .; diff --git a/boards.cfg b/boards.cfg index 04ecdeb4df..6f21af0821 100644 --- a/boards.cfg +++ b/boards.cfg @@ -227,7 +227,12 @@ versatileqemu arm arm926ejs versatile armltd integratorap_cm946es arm arm946es integrator armltd - integratorap:CM946ES integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES ca9x4_ct_vxp arm armv7 vexpress armltd -am335x_evm arm armv7 am335x ti am33xx +am335x_evm arm armv7 am335x ti am33xx am335x_evm:SERIAL1,CONS_INDEX=1 +am335x_evm_uart1 arm armv7 am335x ti am33xx am335x_evm:SERIAL2,CONS_INDEX=2 +am335x_evm_uart2 arm armv7 am335x ti am33xx am335x_evm:SERIAL3,CONS_INDEX=3 +am335x_evm_uart3 arm armv7 am335x ti am33xx am335x_evm:SERIAL4,CONS_INDEX=4 +am335x_evm_uart4 arm armv7 am335x ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5 +am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6 highbank arm armv7 highbank - highbank mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg mx51_efikasb arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg @@ -242,6 +247,7 @@ mx6qarm2 arm armv7 mx6qarm2 freesca mx6qsabreauto arm armv7 mx6qsabreauto freescale mx6 mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg mx6qsabresd arm armv7 mx6qsabresd freescale mx6 mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +eco5pk arm armv7 eco5pk 8dtech omap3 cm_t35 arm armv7 cm_t35 - omap3 omap3_overo arm armv7 overo - omap3 omap3_pandora arm armv7 pandora - omap3 @@ -266,6 +272,7 @@ devkit8000 arm armv7 devkit8000 timll mcx arm armv7 mcx htkw omap3 tricorder arm armv7 tricorder corscience omap3 twister arm armv7 twister technexion omap3 +nokia_rx51 arm armv7 rx51 nokia omap3 omap4_panda arm armv7 panda ti omap4 omap4_sdp4430 arm armv7 sdp4430 ti omap4 omap5_evm arm armv7 omap5_evm ti omap5 @@ -280,6 +287,7 @@ harmony arm armv7:arm720t harmony nvidia seaboard arm armv7:arm720t seaboard nvidia tegra20 ventana arm armv7:arm720t ventana nvidia tegra20 whistler arm armv7:arm720t whistler nvidia tegra20 +colibri_t20_iris arm armv7:arm720t colibri_t20_iris toradex tegra20 u8500_href arm armv7 u8500 st-ericsson u8500 snowball arm armv7 snowball st-ericsson u8500 kzm9g arm armv7 kzm9g kmc rmobile @@ -297,6 +305,7 @@ dvlhost arm ixp pdnb3 arm ixp pdnb3 prodrive scpu arm ixp pdnb3 prodrive - pdnb3:SCPU balloon3 arm pxa +h2200 arm pxa lubbock arm pxa palmld arm pxa palmtc arm pxa @@ -381,6 +390,12 @@ M53017EVB m68k mcf532x m53017evb freesca M5329AFEE m68k mcf532x m5329evb freescale - M5329EVB:NANDFLASH_SIZE=0 M5329BFEE m68k mcf532x m5329evb freescale - M5329EVB:NANDFLASH_SIZE=16 M5373EVB m68k mcf532x m5373evb freescale - M5373EVB:NANDFLASH_SIZE=16 +M54418TWR m68k mcf5445x m54418twr freescale - M54418TWR:CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000 +M54418TWR_nand_mii m68k mcf5445x m54418twr freescale - M54418TWR:SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000 +M54418TWR_nand_rmii m68k mcf5445x m54418twr freescale - M54418TWR:SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000 +M54418TWR_nand_rmii_lowfreq m68k mcf5445x m54418twr freescale - M54418TWR:SYS_NAND_BOOT,LOW_MCFCLK,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000 +M54418TWR_serial_mii m68k mcf5445x m54418twr freescale - M54418TWR:CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000 +M54418TWR_serial_rmii m68k mcf5445x m54418twr freescale - M54418TWR:CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000 M54451EVB m68k mcf5445x m54451evb freescale - M54451EVB:SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000 M54451EVB_stmicro m68k mcf5445x m54451evb freescale - M54451EVB:CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000 M54455EVB m68k mcf5445x m54455evb freescale - M54455EVB:SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333 @@ -406,6 +421,8 @@ M5485HFE m68k mcf547x_8x m548xevb freescale - microblaze-generic microblaze microblaze microblaze-generic xilinx qemu_mips mips mips32 qemu-mips - - qemu-mips:SYS_BIG_ENDIAN qemu_mipsel mips mips32 qemu-mips - - qemu-mips:SYS_LITTLE_ENDIAN +qemu_mips64 mips mips64 qemu-mips - - qemu-mips64:SYS_BIG_ENDIAN +qemu_mips64el mips mips64 qemu-mips - - qemu-mips64:SYS_LITTLE_ENDIAN vct_platinum mips mips32 vct micronas - vct:VCT_PLATINUM vct_platinumavc mips mips32 vct micronas - vct:VCT_PLATINUMAVC vct_platinumavc_onenand mips mips32 vct micronas - vct:VCT_PLATINUMAVC,VCT_ONENAND @@ -546,7 +563,6 @@ Alaska8220 powerpc mpc8220 alaska sorcery powerpc mpc8220 Yukon8220 powerpc mpc8220 alaska A3000 powerpc mpc824x a3000 -BMW powerpc mpc824x bmw CPC45 powerpc mpc824x cpc45 - - CPC45 CPC45_ROMBOOT powerpc mpc824x cpc45 - - CPC45:BOOT_ROM CU824 powerpc mpc824x cu824 @@ -619,7 +635,6 @@ PQ2FADS-ZU_lowboot powerpc mpc8260 mpc8260ads freesca VoVPN-GW_66MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_66MHz mgcoge powerpc mpc8260 km82xx keymile - km82xx:MGCOGE mgcoge3ne powerpc mpc8260 km82xx keymile - km82xx:MGCOGE3NE -SCM powerpc mpc8260 - siemens TQM8255_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8255,300MHz TQM8260_AA powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz TQM8260_AB powerpc mpc8260 tqm8260 tqc - TQM8260:MPC8260,200MHz,L2_CACHE,BUSMODE_60x @@ -679,21 +694,16 @@ MVBLM7 powerpc mpc83xx mvblm7 matrix_ SIMPC8313_LP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_LP SIMPC8313_SP powerpc mpc83xx simpc8313 sheldon - SIMPC8313:NAND_SP TQM834x powerpc mpc83xx tqm834x tqc -suvd3 powerpc mpc83xx km83xx keymile +suvd3 powerpc mpc83xx km83xx keymile - suvd3:SUVD3 +kmvect1 powerpc mpc83xx km83xx keymile - suvd3:KMVECT1 tuge1 powerpc mpc83xx km83xx keymile - tuxx1:KM_DISABLE_APP2,TUGE1 tuxx1 powerpc mpc83xx km83xx keymile kmsupx5 powerpc mpc83xx km83xx keymile - tuxx1:KM_DISABLE_APP2,KMSUPX5 -sbc8540 powerpc mpc85xx sbc8560 - - SBC8540 -sbc8540_33 powerpc mpc85xx sbc8560 - - SBC8540 -sbc8540_66 powerpc mpc85xx sbc8560 - - SBC8540 sbc8548 powerpc mpc85xx sbc8548 - - sbc8548 sbc8548_PCI_33 powerpc mpc85xx sbc8548 - - sbc8548:PCI,33 sbc8548_PCI_33_PCIE powerpc mpc85xx sbc8548 - - sbc8548:PCI,33,PCIE sbc8548_PCI_66 powerpc mpc85xx sbc8548 - - sbc8548:PCI,66 sbc8548_PCI_66_PCIE powerpc mpc85xx sbc8548 - - sbc8548:PCI,66,PCIE -sbc8560 powerpc mpc85xx sbc8560 - - sbc8560 -sbc8560_33 powerpc mpc85xx sbc8560 - - sbc8560 -sbc8560_66 powerpc mpc85xx sbc8560 - - sbc8560 socrates powerpc mpc85xx socrates HWW1U1A powerpc mpc85xx hww1u1a exmeritus MPC8536DS powerpc mpc85xx mpc8536ds freescale - MPC8536DS @@ -844,6 +854,9 @@ BSC9131RDB_SPIFLASH powerpc mpc85xx bsc9131rdb freesca stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M +T4240QDS powerpc mpc85xx t4qds freescale +T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 +T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 xpedite520x powerpc mpc85xx - xes xpedite537x powerpc mpc85xx - xes xpedite550x powerpc mpc85xx - xes @@ -857,11 +870,8 @@ Adder87x powerpc mpc8xx adder - AdderII powerpc mpc8xx adder - - Adder:MPC852T AdderUSB powerpc mpc8xx adder - - Adder ADS860 powerpc mpc8xx fads -c2mon powerpc mpc8xx cogent_mpc8xx powerpc mpc8xx cogent -EP88x powerpc mpc8xx ep88x ESTEEM192E powerpc mpc8xx esteem192e -ETX094 powerpc mpc8xx etx094 FADS823 powerpc mpc8xx fads FADS850SAR powerpc mpc8xx fads FADS860T powerpc mpc8xx fads @@ -879,7 +889,6 @@ IVML24_256 powerpc mpc8xx ivm - IVMS8 powerpc mpc8xx ivm - - IVMS8:IVMS8_16M IVMS8_128 powerpc mpc8xx ivm - - IVMS8:IVMS8_32M IVMS8_256 powerpc mpc8xx ivm - - IVMS8:IVMS8_64M -LANTEC powerpc mpc8xx lantec lwmon powerpc mpc8xx MBX powerpc mpc8xx mbx8xx MBX860T powerpc mpc8xx mbx8xx @@ -926,7 +935,6 @@ KUP4K powerpc mpc8xx kup4k kup KUP4X powerpc mpc8xx kup4x kup ELPT860 powerpc mpc8xx elpt860 LEOX uc100 powerpc mpc8xx - manroland -IAD210 powerpc mpc8xx - siemens QS823 powerpc mpc8xx qs850 snmc QS850 powerpc mpc8xx qs850 snmc QS860T powerpc mpc8xx qs860t snmc @@ -952,7 +960,6 @@ TQM885D powerpc mpc8xx tqm8xx tqc TTTech powerpc mpc8xx tqm8xx tqc - TQM823L:LCD,SHARP_LQ104V7DS01 virtlab2 powerpc mpc8xx tqm8xx tqc wtk powerpc mpc8xx tqm8xx tqc - TQM823L:LCD,SHARP_LQ065T9DR51U -AMX860 powerpc mpc8xx amx860 westel csb272 powerpc ppc4xx csb472 powerpc ppc4xx G2000 powerpc ppc4xx g2000 diff --git a/common/Makefile b/common/Makefile index fdfead79c2..9e43322211 100644 --- a/common/Makefile +++ b/common/Makefile @@ -70,6 +70,7 @@ COBJS-$(CONFIG_CMD_BMP) += cmd_bmp.o COBJS-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o COBJS-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o COBJS-$(CONFIG_CMD_CACHE) += cmd_cache.o +COBJS-$(CONFIG_CMD_CBFS) += cmd_cbfs.o COBJS-$(CONFIG_CMD_CONSOLE) += cmd_console.o COBJS-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o @@ -89,11 +90,6 @@ COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o COBJS-$(CONFIG_SYS_HUSH_PARSER) += cmd_exit.o COBJS-$(CONFIG_CMD_EXT4) += cmd_ext4.o COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o -ifdef CONFIG_CMD_EXT4 -COBJS-y += cmd_ext_common.o -else -COBJS-$(CONFIG_CMD_EXT2) += cmd_ext_common.o -endif COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o COBJS-$(CONFIG_CMD_FDC)$(CONFIG_CMD_FDOS) += cmd_fdc.o COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o @@ -103,6 +99,7 @@ COBJS-$(CONFIG_CMD_FLASH) += cmd_flash.o ifdef CONFIG_FPGA COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o endif +COBJS-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o COBJS-$(CONFIG_CMD_IDE) += cmd_ide.o @@ -204,6 +201,7 @@ COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_common.o COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_nowhere.o COBJS-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o endif +COBJS-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o COBJS-y += console.o COBJS-y += dlmalloc.o COBJS-y += image.o diff --git a/common/bouncebuf.c b/common/bouncebuf.c new file mode 100644 index 0000000000..4f827f893d --- /dev/null +++ b/common/bouncebuf.c @@ -0,0 +1,92 @@ +/* + * Generic bounce buffer implementation + * + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <bouncebuf.h> + +static int addr_aligned(void *data, size_t len) +{ + const ulong align_mask = ARCH_DMA_MINALIGN - 1; + + /* Check if start is aligned */ + if ((ulong)data & align_mask) { + debug("Unaligned start address %p\n", data); + return 0; + } + + data += len; + + /* Check if end is aligned */ + if ((ulong)data & align_mask) { + debug("Unaligned end address %p\n", data); + return 0; + } + + /* Aligned */ + return 1; +} + +int bounce_buffer_start(void **data, size_t len, void **backup, uint8_t flags) +{ + void *tmp; + size_t alen; + + if (addr_aligned(*data, len)) { + *backup = NULL; + return 0; + } + + alen = roundup(len, ARCH_DMA_MINALIGN); + tmp = memalign(ARCH_DMA_MINALIGN, alen); + + if (!tmp) + return -ENOMEM; + + if (flags & GEN_BB_READ) + memcpy(tmp, *data, len); + + *backup = *data; + *data = tmp; + + return 0; +} + +int bounce_buffer_stop(void **data, size_t len, void **backup, uint8_t flags) +{ + void *tmp = *data; + + /* The buffer was already aligned, since "backup" is NULL. */ + if (!*backup) + return 0; + + if (flags & GEN_BB_WRITE) + memcpy(*backup, *data, len); + + *data = *backup; + free(tmp); + + return 0; +} diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 286c8c8011..48cdd16dd2 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -148,7 +148,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_mhz("ethspeed", bd->bi_ethspeed); #endif printf("IP addr = %s\n", getenv("ipaddr")); - printf("baudrate = %6ld bps\n", bd->bi_baudrate); + printf("baudrate = %6u bps\n", bd->bi_baudrate); print_num("relocaddr", gd->relocaddr); return 0; } @@ -175,7 +175,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %ld bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -198,7 +198,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %ld bps\n", (ulong)bd->bi_baudrate); + printf("baudrate = %u bps\n", (ulong)bd->bi_baudrate); return 0; } @@ -231,7 +231,7 @@ int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %6ld bps\n", bd->bi_baudrate); + printf("baudrate = %6u bps\n", bd->bi_baudrate); return 0; } @@ -277,7 +277,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %ld bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -304,7 +304,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); - printf("baudrate = %d bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -324,7 +324,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); - printf("baudrate = %d bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -344,7 +344,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); - printf("baudrate = %lu bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -369,7 +369,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %d bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) print_num("TLB addr", gd->tlb_addr); #endif @@ -405,7 +405,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %ld bps\n", (ulong)bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -439,7 +439,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("ip_addr = %s\n", getenv("ipaddr")); print_mhz("ethspeed", bd->bi_ethspeed); #endif - printf("baudrate = %d bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -487,7 +487,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %d bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } @@ -509,7 +509,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %ld bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", bd->bi_baudrate); return 0; } diff --git a/common/cmd_boot.c b/common/cmd_boot.c index a799b338a4..d3836fdfd8 100644 --- a/common/cmd_boot.c +++ b/common/cmd_boot.c @@ -32,12 +32,13 @@ /* Allow ports to override the default behavior */ __attribute__((weak)) -unsigned long do_go_exec (ulong (*entry)(int, char * const []), int argc, char * const argv[]) +unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc, + char * const argv[]) { return entry (argc, argv); } -int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_go(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr, rc; int rcode = 0; diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 83fa5d7bd8..d256ddfaa6 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -161,7 +161,7 @@ static boot_os_fn *boot_os[] = { bootm_headers_t images; /* pointers to os/initrd/fdt images */ /* Allow for arch specific config before we boot */ -void __arch_preboot_os(void) +static void __arch_preboot_os(void) { /* please define platform specific arch_preboot_os() */ } @@ -474,7 +474,7 @@ static cmd_tbl_t cmd_bootm_sub[] = { U_BOOT_CMD_MKENT(go, 0, 1, (void *)BOOTM_STATE_OS_GO, "", ""), }; -int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc, +static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int ret = 0; @@ -1013,9 +1013,8 @@ static void *boot_get_kernel(cmd_tbl_t *cmdtp, int flag, int argc, return (void *)img_addr; } -U_BOOT_CMD( - bootm, CONFIG_SYS_MAXARGS, 1, do_bootm, - "boot application image from memory", +#ifdef CONFIG_SYS_LONGHELP +static char bootm_help_text[] = "[addr [arg ...]]\n - boot application image stored in memory\n" "\tpassing arguments 'arg ...'; when booting a Linux kernel,\n" "\t'arg' can be the address of an initrd image\n" @@ -1048,7 +1047,12 @@ U_BOOT_CMD( "\tcmdline - OS specific command line processing/setup\n" "\tbdt - OS specific bd_t processing\n" "\tprep - OS specific prep before relocation or go\n" - "\tgo - start OS" + "\tgo - start OS"; +#endif + +U_BOOT_CMD( + bootm, CONFIG_SYS_MAXARGS, 1, do_bootm, + "boot application image from memory", bootm_help_text ); /*******************************************************************/ @@ -1084,7 +1088,7 @@ U_BOOT_CMD( /* iminfo - print header info for a requested image */ /*******************************************************************/ #if defined(CONFIG_CMD_IMI) -int do_iminfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_iminfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int arg; ulong addr; @@ -1171,7 +1175,7 @@ U_BOOT_CMD( /* imls - list all images found in flash */ /*******************************************************************/ #if defined(CONFIG_CMD_IMLS) -int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { flash_info_t *info; int i, j; @@ -1643,9 +1647,8 @@ static int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; } -U_BOOT_CMD( - bootz, CONFIG_SYS_MAXARGS, 1, do_bootz, - "boot Linux zImage image from memory", +#ifdef CONFIG_SYS_LONGHELP +static char bootz_help_text[] = "[addr [initrd[:size]] [fdt]]\n" " - boot Linux zImage stored in memory\n" "\tThe argument 'initrd' is optional and specifies the address\n" @@ -1658,5 +1661,11 @@ U_BOOT_CMD( "\tuse a '-' for the second argument. If you do not pass a third\n" "\ta bd_info struct will be passed instead\n" #endif + ""; +#endif + +U_BOOT_CMD( + bootz, CONFIG_SYS_MAXARGS, 1, do_bootz, + "boot Linux zImage image from memory", bootz_help_text ); #endif /* CONFIG_CMD_BOOTZ */ diff --git a/common/cmd_cbfs.c b/common/cmd_cbfs.c new file mode 100644 index 0000000000..3b6cfd879b --- /dev/null +++ b/common/cmd_cbfs.c @@ -0,0 +1,214 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CBFS commands + */ +#include <common.h> +#include <command.h> +#include <cbfs.h> + +int do_cbfs_init(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + uintptr_t end_of_rom = 0xffffffff; + char *ep; + + if (argc > 2) { + printf("usage: cbfsls [end of rom]>\n"); + return 0; + } + if (argc == 2) { + end_of_rom = (int)simple_strtoul(argv[1], &ep, 16); + if (*ep) { + puts("\n** Invalid end of ROM **\n"); + return 1; + } + } + file_cbfs_init(end_of_rom); + if (file_cbfs_result != CBFS_SUCCESS) { + printf("%s.\n", file_cbfs_error()); + return 1; + } + return 0; +} + +U_BOOT_CMD( + cbfsinit, 2, 0, do_cbfs_init, + "initialize the cbfs driver", + "[end of rom]\n" + " - Initialize the cbfs driver. The optional 'end of rom'\n" + " parameter specifies where the end of the ROM is that the\n" + " CBFS is in. It defaults to 0xFFFFFFFF\n" +); + +int do_cbfs_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + const struct cbfs_cachenode *file; + unsigned long offset; + unsigned long count; + char buf[12]; + long size; + + if (argc < 3) { + printf("usage: cbfsload <addr> <filename> [bytes]\n"); + return 1; + } + + /* parse offset and count */ + offset = simple_strtoul(argv[1], NULL, 16); + if (argc == 4) + count = simple_strtoul(argv[3], NULL, 16); + else + count = 0; + + file = file_cbfs_find(argv[2]); + if (!file) { + if (file_cbfs_result == CBFS_FILE_NOT_FOUND) + printf("%s: %s\n", file_cbfs_error(), argv[2]); + else + printf("%s.\n", file_cbfs_error()); + return 1; + } + + printf("reading %s\n", file_cbfs_name(file)); + + size = file_cbfs_read(file, (void *)offset, count); + + printf("\n%ld bytes read\n", size); + + sprintf(buf, "%lX", size); + setenv("filesize", buf); + + return 0; +} + +U_BOOT_CMD( + cbfsload, 4, 0, do_cbfs_fsload, + "load binary file from a cbfs filesystem", + "<addr> <filename> [bytes]\n" + " - load binary file 'filename' from the cbfs to address 'addr'\n" +); + +int do_cbfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + const struct cbfs_cachenode *file = file_cbfs_get_first(); + int files = 0; + + if (!file) { + printf("%s.\n", file_cbfs_error()); + return 1; + } + + printf(" size type name\n"); + printf("------------------------------------------\n"); + while (file) { + u32 type = file_cbfs_type(file); + char *type_name = NULL; + const char *filename = file_cbfs_name(file); + + printf(" %8d", file_cbfs_size(file)); + + switch (type) { + case CBFS_TYPE_STAGE: + type_name = "stage"; + break; + case CBFS_TYPE_PAYLOAD: + type_name = "payload"; + break; + case CBFS_TYPE_OPTIONROM: + type_name = "option rom"; + break; + case CBFS_TYPE_BOOTSPLASH: + type_name = "boot splash"; + break; + case CBFS_TYPE_RAW: + type_name = "raw"; + break; + case CBFS_TYPE_VSA: + type_name = "vsa"; + break; + case CBFS_TYPE_MBI: + type_name = "mbi"; + break; + case CBFS_TYPE_MICROCODE: + type_name = "microcode"; + break; + case CBFS_COMPONENT_CMOS_DEFAULT: + type_name = "cmos default"; + break; + case CBFS_COMPONENT_CMOS_LAYOUT: + type_name = "cmos layout"; + break; + case -1UL: + type_name = "null"; + break; + } + if (type_name) + printf(" %16s", type_name); + else + printf(" %16d", type); + + if (filename[0]) + printf(" %s\n", filename); + else + printf(" %s\n", "(empty)"); + file_cbfs_get_next(&file); + files++; + } + + printf("\n%d file(s)\n\n", files); + return 0; +} + +U_BOOT_CMD( + cbfsls, 1, 1, do_cbfs_ls, + "list files", + " - list the files in the cbfs\n" +); + +int do_cbfs_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + const struct cbfs_header *header = file_cbfs_get_header(); + + if (!header) { + printf("%s.\n", file_cbfs_error()); + return 1; + } + + printf("\n"); + printf("CBFS version: %#x\n", header->version); + printf("ROM size: %#x\n", header->rom_size); + printf("Boot block size: %#x\n", header->boot_block_size); + printf("CBFS size: %#x\n", + header->rom_size - header->boot_block_size - header->offset); + printf("Alignment: %d\n", header->align); + printf("Offset: %#x\n", header->offset); + printf("\n"); + + return 0; +} + +U_BOOT_CMD( + cbfsinfo, 1, 1, do_cbfs_fsinfo, + "print information about filesystem", + " - print information about the cbfs filesystem\n" +); diff --git a/common/cmd_console.c b/common/cmd_console.c index d8cad6b917..e8d9f11bde 100644 --- a/common/cmd_console.c +++ b/common/cmd_console.c @@ -29,7 +29,7 @@ #include <stdio_dev.h> extern void _do_coninfo (void); -int do_coninfo (cmd_tbl_t * cmd, int flag, int argc, char * const argv[]) +static int do_coninfo(cmd_tbl_t *cmd, int flag, int argc, char * const argv[]) { int l; struct list_head *list = stdio_get_list(); diff --git a/common/cmd_date.c b/common/cmd_date.c index 335bc05f2a..0ac032cf30 100644 --- a/common/cmd_date.c +++ b/common/cmd_date.c @@ -43,7 +43,7 @@ static const char * const weekdays[] = { int mk_date (const char *, struct rtc_time *); -int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_date(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { struct rtc_time tm; int rcode = 0; diff --git a/common/cmd_echo.c b/common/cmd_echo.c index 1e499fb0db..52123fee2a 100644 --- a/common/cmd_echo.c +++ b/common/cmd_echo.c @@ -24,7 +24,7 @@ #include <common.h> #include <command.h> -int do_echo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_echo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int i; int putnl = 1; diff --git a/common/cmd_exit.c b/common/cmd_exit.c index f3fc8f5e79..0f2ee4046f 100644 --- a/common/cmd_exit.c +++ b/common/cmd_exit.c @@ -24,7 +24,7 @@ #include <common.h> #include <command.h> -int do_exit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_exit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int r; diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c index c27d9c7ede..f25e22b0a8 100644 --- a/common/cmd_ext2.c +++ b/common/cmd_ext2.c @@ -37,15 +37,11 @@ /* * Ext2fs support */ -#include <common.h> -#include <ext_common.h> +#include <fs.h> int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (do_ext_ls(cmdtp, flag, argc, argv)) - return -1; - - return 0; + return do_ls(cmdtp, flag, argc, argv, FS_TYPE_EXT); } /****************************************************************************** @@ -53,10 +49,7 @@ int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) */ int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - if (do_ext_load(cmdtp, flag, argc, argv)) - return -1; - - return 0; + return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT, 16); } U_BOOT_CMD( @@ -71,5 +64,6 @@ U_BOOT_CMD( "load binary file from a Ext2 filesystem", "<interface> <dev[:part]> [addr] [filename] [bytes]\n" " - load binary file 'filename' from 'dev' on 'interface'\n" - " to address 'addr' from ext2 filesystem" + " to address 'addr' from ext2 filesystem.\n" + " All numeric parameters are assumed to be hex." ); diff --git a/common/cmd_ext4.c b/common/cmd_ext4.c index ca4656184c..dcf76a50cd 100644 --- a/common/cmd_ext4.c +++ b/common/cmd_ext4.c @@ -47,10 +47,10 @@ #include <image.h> #include <linux/ctype.h> #include <asm/byteorder.h> -#include <ext_common.h> #include <ext4fs.h> #include <linux/stat.h> #include <malloc.h> +#include <fs.h> #if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE) #include <usb.h> @@ -59,18 +59,12 @@ int do_ext4_load(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { - if (do_ext_load(cmdtp, flag, argc, argv)) - return -1; - - return 0; + return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT, 16); } int do_ext4_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { - if (do_ext_ls(cmdtp, flag, argc, argv)) - return -1; - - return 0; + return do_ls(cmdtp, flag, argc, argv, FS_TYPE_EXT); } #if defined(CONFIG_CMD_EXT4_WRITE) @@ -107,7 +101,7 @@ int do_ext4_write(cmd_tbl_t *cmdtp, int flag, int argc, /* mount the filesystem */ if (!ext4fs_mount(info.size)) { - printf("Bad ext4 partition %s %d:%lu\n", argv[1], dev, part); + printf("Bad ext4 partition %s %d:%d\n", argv[1], dev, part); goto fail; } @@ -129,17 +123,18 @@ fail: U_BOOT_CMD(ext4write, 6, 1, do_ext4_write, "create a file in the root directory", "<interface> <dev[:part]> [Absolute filename path] [Address] [sizebytes]\n" - " - create a file in / directory"); + " - create a file in / directory"); #endif U_BOOT_CMD(ext4ls, 4, 1, do_ext4_ls, "list files in a directory (default /)", "<interface> <dev[:part]> [directory]\n" - " - list files from 'dev' on 'interface' in a 'directory'"); + " - list files from 'dev' on 'interface' in a 'directory'"); U_BOOT_CMD(ext4load, 6, 0, do_ext4_load, "load binary file from a Ext4 filesystem", "<interface> <dev[:part]> [addr] [filename] [bytes]\n" - " - load binary file 'filename' from 'dev' on 'interface'\n" - " to address 'addr' from ext4 filesystem"); + " - load binary file 'filename' from 'dev' on 'interface'\n" + " to address 'addr' from ext4 filesystem.\n" + " All numeric parameters are assumed to be hex."); diff --git a/common/cmd_ext_common.c b/common/cmd_ext_common.c deleted file mode 100644 index 1952f4d1e1..0000000000 --- a/common/cmd_ext_common.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * (C) Copyright 2011 - 2012 Samsung Electronics - * EXT2/4 filesystem implementation in Uboot by - * Uma Shankar <uma.shankar@samsung.com> - * Manjunatha C Achar <a.manjunatha@samsung.com> - * - * Ext4fs support - * made from existing cmd_ext2.c file of Uboot - * - * (C) Copyright 2004 - * esd gmbh <www.esd-electronics.com> - * Reinhard Arlt <reinhard.arlt@esd-electronics.com> - * - * made from cmd_reiserfs by - * - * (C) Copyright 2003 - 2004 - * Sysgo Real-Time Solutions, AG <www.elinos.com> - * Pavel Bartusek <pba@sysgo.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -/* - * Changelog: - * 0.1 - Newly created file for ext4fs support. Taken from cmd_ext2.c - * file in uboot. Added ext4fs ls load and write support. - */ - -#include <common.h> -#include <part.h> -#include <config.h> -#include <command.h> -#include <image.h> -#include <linux/ctype.h> -#include <asm/byteorder.h> -#include <ext_common.h> -#include <ext4fs.h> -#include <linux/stat.h> -#include <malloc.h> - -#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE) -#include <usb.h> -#endif - -#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION) -#error DOS or EFI partition support must be selected -#endif - -#define DOS_PART_MAGIC_OFFSET 0x1fe -#define DOS_FS_TYPE_OFFSET 0x36 -#define DOS_FS32_TYPE_OFFSET 0x52 - -int do_ext_load(cmd_tbl_t *cmdtp, int flag, int argc, - char *const argv[]) -{ - char *filename = NULL; - int dev, part; - ulong addr = 0; - int filelen; - disk_partition_t info; - block_dev_desc_t *dev_desc; - char buf[12]; - unsigned long count; - const char *addr_str; - - count = 0; - addr = simple_strtoul(argv[3], NULL, 16); - filename = getenv("bootfile"); - switch (argc) { - case 3: - addr_str = getenv("loadaddr"); - if (addr_str != NULL) - addr = simple_strtoul(addr_str, NULL, 16); - else - addr = CONFIG_SYS_LOAD_ADDR; - - break; - case 4: - break; - case 5: - filename = argv[4]; - break; - case 6: - filename = argv[4]; - count = simple_strtoul(argv[5], NULL, 16); - break; - - default: - return cmd_usage(cmdtp); - } - - if (!filename) { - puts("** No boot file defined **\n"); - return 1; - } - - part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1); - if (part < 0) - return 1; - - dev = dev_desc->dev; - printf("Loading file \"%s\" from %s device %d%c%c\n", - filename, argv[1], dev, - part ? ':' : ' ', part ? part + '0' : ' '); - - ext4fs_set_blk_dev(dev_desc, &info); - - if (!ext4fs_mount(info.size)) { - printf("** Bad ext2 partition or disk - %s %d:%d **\n", - argv[1], dev, part); - ext4fs_close(); - goto fail; - } - - filelen = ext4fs_open(filename); - if (filelen < 0) { - printf("** File not found %s\n", filename); - ext4fs_close(); - goto fail; - } - if ((count < filelen) && (count != 0)) - filelen = count; - - if (ext4fs_read((char *)addr, filelen) != filelen) { - printf("** Unable to read \"%s\" from %s %d:%d **\n", - filename, argv[1], dev, part); - ext4fs_close(); - goto fail; - } - - ext4fs_close(); - /* Loading ok, update default load address */ - load_addr = addr; - - printf("%d bytes read\n", filelen); - sprintf(buf, "%X", filelen); - setenv("filesize", buf); - - return 0; -fail: - return 1; -} - -int do_ext_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) -{ - const char *filename = "/"; - int dev; - int part; - block_dev_desc_t *dev_desc; - disk_partition_t info; - - if (argc < 2) - return cmd_usage(cmdtp); - - part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1); - if (part < 0) - return 1; - - if (argc == 4) - filename = argv[3]; - - dev = dev_desc->dev; - ext4fs_set_blk_dev(dev_desc, &info); - - if (!ext4fs_mount(info.size)) { - printf("** Bad ext2 partition or disk - %s %d:%d **\n", - argv[1], dev, part); - ext4fs_close(); - goto fail; - } - - if (ext4fs_ls(filename)) { - printf("** Error extfs_ls() **\n"); - ext4fs_close(); - goto fail; - }; - - ext4fs_close(); - return 0; - -fail: - return 1; -} diff --git a/common/cmd_fat.c b/common/cmd_fat.c index 5a5698b056..86be044725 100644 --- a/common/cmd_fat.c +++ b/common/cmd_fat.c @@ -31,54 +31,11 @@ #include <ata.h> #include <part.h> #include <fat.h> - +#include <fs.h> int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - long size; - unsigned long offset; - unsigned long count = 0; - unsigned long pos = 0; - char buf [12]; - block_dev_desc_t *dev_desc=NULL; - disk_partition_t info; - int part, dev; - - if (argc < 5) { - printf("usage: fatload <interface> [<dev[:part]>] " - "<addr> <filename> [bytes [pos]]\n"); - return 1; - } - - part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1); - if (part < 0) - return 1; - - dev = dev_desc->dev; - if (fat_register_device(dev_desc,part)!=0) { - printf("\n** Unable to use %s %d:%d for fatload **\n", - argv[1], dev, part); - return 1; - } - offset = simple_strtoul(argv[3], NULL, 16); - if (argc >= 6) - count = simple_strtoul(argv[5], NULL, 16); - if (argc >= 7) - pos = simple_strtoul(argv[6], NULL, 16); - size = file_fat_read_at(argv[4], pos, (unsigned char *)offset, count); - - if(size==-1) { - printf("\n** Unable to read \"%s\" from %s %d:%d **\n", - argv[4], argv[1], dev, part); - return 1; - } - - printf("\n%ld bytes read\n", size); - - sprintf(buf, "%lX", size); - setenv("filesize", buf); - - return 0; + return do_load(cmdtp, flag, argc, argv, FS_TYPE_FAT, 16); } @@ -91,39 +48,13 @@ U_BOOT_CMD( " 'pos' gives the file position to start loading from.\n" " If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n" " 'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n" - " the load stops on end of file." + " the load stops on end of file.\n" + " All numeric parameters are assumed to be hex." ); -int do_fat_ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_fat_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - char *filename = "/"; - int ret, dev, part; - block_dev_desc_t *dev_desc=NULL; - disk_partition_t info; - - if (argc < 2) { - printf("usage: fatls <interface> [<dev[:part]>] [directory]\n"); - return 0; - } - - part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1); - if (part < 0) - return 1; - - dev = dev_desc->dev; - if (fat_register_device(dev_desc,part)!=0) { - printf("\n** Unable to use %s %d:%d for fatls **\n", - argv[1], dev, part); - return 1; - } - if (argc == 4) - ret = file_fat_ls(argv[3]); - else - ret = file_fat_ls(filename); - - if(ret!=0) - printf("No Fat FS detected\n"); - return ret; + return do_ls(cmdtp, flag, argc, argv, FS_TYPE_FAT); } U_BOOT_CMD( @@ -133,7 +64,8 @@ U_BOOT_CMD( " - list files from 'dev' on 'interface' in a 'directory'" ); -int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_fat_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { int dev, part; block_dev_desc_t *dev_desc; @@ -149,7 +81,7 @@ int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 1; dev = dev_desc->dev; - if (fat_register_device(dev_desc,part)!=0) { + if (fat_set_blk_dev(dev_desc, &info) != 0) { printf("\n** Unable to use %s %d:%d for fatinfo **\n", argv[1], dev, part); return 1; @@ -185,7 +117,7 @@ static int do_fat_fswrite(cmd_tbl_t *cmdtp, int flag, dev = dev_desc->dev; - if (fat_register_device(dev_desc, part) != 0) { + if (fat_set_blk_dev(dev_desc, &info) != 0) { printf("\n** Unable to use %s %d:%d for fatwrite **\n", argv[1], dev, part); return 1; diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index e2225c4d5c..9e2de34737 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -35,6 +35,9 @@ #define MAX_LEVEL 32 /* how deeply nested we will go */ #define SCRATCHPAD 1024 /* bytes of scratchpad memory */ +#ifndef CONFIG_CMD_FDT_MAX_DUMP +#define CONFIG_CMD_FDT_MAX_DUMP 64 +#endif /* * Global data (for the gd->bd) @@ -44,6 +47,7 @@ DECLARE_GLOBAL_DATA_PTR; static int fdt_valid(void); static int fdt_parse_prop(char *const*newval, int count, char *data, int *len); static int fdt_print(const char *pathp, char *prop, int depth); +static int is_printable_string(const void *data, int len); /* * The working_fdt points to our working flattened device tree. @@ -61,9 +65,37 @@ void set_working_fdt_addr(void *addr) } /* + * Get a value from the fdt and format it to be set in the environment + */ +static int fdt_value_setenv(const void *nodep, int len, const char *var) +{ + if (is_printable_string(nodep, len)) + setenv(var, (void *)nodep); + else if (len == 4) { + char buf[11]; + + sprintf(buf, "0x%08X", *(uint32_t *)nodep); + setenv(var, buf); + } else if (len%4 == 0 && len <= 20) { + /* Needed to print things like sha1 hashes. */ + char buf[41]; + int i; + + for (i = 0; i < len; i += sizeof(unsigned int)) + sprintf(buf + (i * 2), "%08x", + *(unsigned int *)(nodep + i)); + setenv(var, buf); + } else { + printf("error: unprintable value\n"); + return 1; + } + return 0; +} + +/* * Flattened Device Tree command, see the help for parameter definitions. */ -int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { if (argc < 2) return CMD_RET_USAGE; @@ -250,6 +282,117 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 1; } + /******************************************************************** + * Get the value of a property in the working_fdt. + ********************************************************************/ + } else if (argv[1][0] == 'g') { + char *subcmd; /* sub-command */ + char *pathp; /* path */ + char *prop; /* property */ + char *var; /* variable to store result */ + int nodeoffset; /* node offset from libfdt */ + const void *nodep; /* property node pointer */ + int len = 0; /* new length of the property */ + + /* + * Parameters: Node path, property, optional value. + */ + if (argc < 5) + return CMD_RET_USAGE; + + subcmd = argv[2]; + + if (argc < 6 && subcmd[0] != 's') + return CMD_RET_USAGE; + + var = argv[3]; + pathp = argv[4]; + prop = argv[5]; + + nodeoffset = fdt_path_offset(working_fdt, pathp); + if (nodeoffset < 0) { + /* + * Not found or something else bad happened. + */ + printf("libfdt fdt_path_offset() returned %s\n", + fdt_strerror(nodeoffset)); + return 1; + } + + if (subcmd[0] == 'n' || (subcmd[0] == 's' && argc == 5)) { + int reqIndex = -1; + int startDepth = fdt_node_depth( + working_fdt, nodeoffset); + int curDepth = startDepth; + int curIndex = -1; + int nextNodeOffset = fdt_next_node( + working_fdt, nodeoffset, &curDepth); + + if (subcmd[0] == 'n') + reqIndex = simple_strtoul(argv[5], NULL, 16); + + while (curDepth > startDepth) { + if (curDepth == startDepth + 1) + curIndex++; + if (subcmd[0] == 'n' && curIndex == reqIndex) { + const char *nodeName = fdt_get_name( + working_fdt, nextNodeOffset, NULL); + + setenv(var, (char *)nodeName); + return 0; + } + nextNodeOffset = fdt_next_node( + working_fdt, nextNodeOffset, &curDepth); + if (nextNodeOffset < 0) + break; + } + if (subcmd[0] == 's') { + /* get the num nodes at this level */ + char buf[11]; + + sprintf(buf, "%d", curIndex + 1); + setenv(var, buf); + } else { + /* node index not found */ + printf("libfdt node not found\n"); + return 1; + } + } else { + nodep = fdt_getprop( + working_fdt, nodeoffset, prop, &len); + if (len == 0) { + /* no property value */ + setenv(var, ""); + return 0; + } else if (len > 0) { + if (subcmd[0] == 'v') { + int ret; + + ret = fdt_value_setenv(nodep, len, var); + if (ret != 0) + return ret; + } else if (subcmd[0] == 'a') { + /* Get address */ + char buf[11]; + + sprintf(buf, "0x%p", nodep); + setenv(var, buf); + } else if (subcmd[0] == 's') { + /* Get size */ + char buf[11]; + + sprintf(buf, "0x%08X", len); + setenv(var, buf); + } else + return CMD_RET_USAGE; + return 0; + } else { + printf("libfdt fdt_getprop(): %s\n", + fdt_strerror(len)); + return 1; + } + } + /* * Print (recursive) / List (single level) */ @@ -539,7 +682,7 @@ static int fdt_parse_prop(char * const *newval, int count, char *data, int *len) cp = newp; tmp = simple_strtoul(cp, &newp, 0); - *(uint32_t *)data = __cpu_to_be32(tmp); + *(__be32 *)data = __cpu_to_be32(tmp); data += 4; *len += 4; @@ -611,12 +754,12 @@ static int is_printable_string(const void *data, int len) if (len == 0) return 0; - /* must terminate with zero */ - if (s[len - 1] != '\0') + /* must terminate with zero or '\n' */ + if (s[len - 1] != '\0' && s[len - 1] != '\n') return 0; /* printable or a null byte (concatenated strings) */ - while (((*s == '\0') || isprint(*s)) && (len > 0)) { + while (((*s == '\0') || isprint(*s) || isspace(*s)) && (len > 0)) { /* * If we see a null, there are three possibilities: * 1) If len == 1, it is the end of the string, printable @@ -672,19 +815,28 @@ static void print_data(const void *data, int len) } if ((len %4) == 0) { - const u32 *p; - - printf("<"); - for (j = 0, p = data; j < len/4; j ++) - printf("0x%x%s", fdt32_to_cpu(p[j]), j < (len/4 - 1) ? " " : ""); - printf(">"); + if (len > CONFIG_CMD_FDT_MAX_DUMP) + printf("* 0x%p [0x%08x]", data, len); + else { + const __be32 *p; + + printf("<"); + for (j = 0, p = data; j < len/4; j++) + printf("0x%08x%s", fdt32_to_cpu(p[j]), + j < (len/4 - 1) ? " " : ""); + printf(">"); + } } else { /* anything else... hexdump */ - const u8 *s; - - printf("["); - for (j = 0, s = data; j < len; j++) - printf("%02x%s", s[j], j < len - 1 ? " " : ""); - printf("]"); + if (len > CONFIG_CMD_FDT_MAX_DUMP) + printf("* 0x%p [0x%08x]", data, len); + else { + const u8 *s; + + printf("["); + for (j = 0, s = data; j < len; j++) + printf("%02x%s", s[j], j < len - 1 ? " " : ""); + printf("]"); + } } } @@ -812,11 +964,9 @@ static int fdt_print(const char *pathp, char *prop, int depth) } /********************************************************************/ - -U_BOOT_CMD( - fdt, 255, 0, do_fdt, - "flattened device tree utility commands", - "addr <addr> [<length>] - Set the fdt location to <addr>\n" +#ifdef CONFIG_SYS_LONGHELP +static char fdt_help_text[] = + "addr <addr> [<length>] - Set the fdt location to <addr>\n" #ifdef CONFIG_OF_BOARD_SETUP "fdt boardsetup - Do board-specific set up\n" #endif @@ -824,6 +974,10 @@ U_BOOT_CMD( "fdt resize - Resize fdt to size + padding to 4k addr\n" "fdt print <path> [<prop>] - Recursive print starting at <path>\n" "fdt list <path> [<prop>] - Print one level starting at <path>\n" + "fdt get value <var> <path> <prop> - Get <property> and store in <var>\n" + "fdt get name <var> <path> <index> - Get name of node <index> and store in <var>\n" + "fdt get addr <var> <path> <prop> - Get start address of <property> and store in <var>\n" + "fdt get size <var> <path> [<prop>] - Get size of [<property>] or num nodes and store in <var>\n" "fdt set <path> <prop> [<val>] - Set <property> [to <val>]\n" "fdt mknode <path> <node> - Create a new node after <path>\n" "fdt rm <path> [<prop>] - Delete the node or <property>\n" @@ -836,5 +990,10 @@ U_BOOT_CMD( "fdt chosen [<start> <end>] - Add/update the /chosen branch in the tree\n" " <start>/<end> - initrd start/end addr\n" "NOTE: Dereference aliases by omiting the leading '/', " - "e.g. fdt print ethernet0." + "e.g. fdt print ethernet0."; +#endif + +U_BOOT_CMD( + fdt, 255, 0, do_fdt, + "flattened device tree utility commands", fdt_help_text ); diff --git a/common/cmd_flash.c b/common/cmd_flash.c index e55d366c65..687eb68db1 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -289,7 +289,7 @@ flash_fill_sect_ranges (ulong addr_first, ulong addr_last, } #endif /* CONFIG_SYS_NO_FLASH */ -int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_flinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { #ifndef CONFIG_SYS_NO_FLASH ulong bank; @@ -321,7 +321,7 @@ int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } -int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_flerase(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { #ifndef CONFIG_SYS_NO_FLASH flash_info_t *info = NULL; @@ -454,7 +454,7 @@ int flash_sect_erase (ulong addr_first, ulong addr_last) } #endif /* CONFIG_SYS_NO_FLASH */ -int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_protect(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int rcode = 0; #ifndef CONFIG_SYS_NO_FLASH diff --git a/common/cmd_fs.c b/common/cmd_fs.c new file mode 100644 index 0000000000..a681d03d1b --- /dev/null +++ b/common/cmd_fs.c @@ -0,0 +1,53 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * Inspired by cmd_ext_common.c, cmd_fat.c. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <common.h> +#include <command.h> +#include <fs.h> + +int do_load_wrapper(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + return do_load(cmdtp, flag, argc, argv, FS_TYPE_ANY, 0); +} + +U_BOOT_CMD( + load, 7, 0, do_load_wrapper, + "load binary file from a filesystem", + "<interface> [<dev[:part]> [<addr> [<filename> [bytes [pos]]]]]\n" + " - Load binary file 'filename' from partition 'part' on device\n" + " type 'interface' instance 'dev' to address 'addr' in memory.\n" + " 'bytes' gives the size to load in bytes.\n" + " If 'bytes' is 0 or omitted, the file is read until the end.\n" + " 'pos' gives the file byte position to start reading from.\n" + " If 'pos' is 0 or omitted, the file is read from the start.\n" + " All numeric parameters are assumed to be decimal,\n" + " unless specified otherwise using a leading \"0x\"." +); + +int do_ls_wrapper(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + return do_ls(cmdtp, flag, argc, argv, FS_TYPE_ANY); +} + +U_BOOT_CMD( + ls, 4, 1, do_ls_wrapper, + "list files in a directory (default /)", + "<interface> [<dev[:part]> [directory]]\n" + " - List files in directory 'directory' of partition 'part' on\n" + " device type 'interface' instance 'dev'." +); diff --git a/common/cmd_help.c b/common/cmd_help.c index 8c8178e41d..f832a96971 100644 --- a/common/cmd_help.c +++ b/common/cmd_help.c @@ -24,11 +24,11 @@ #include <common.h> #include <command.h> -int do_help(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +static int do_help(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - return _do_help(&__u_boot_cmd_start, - &__u_boot_cmd_end - &__u_boot_cmd_start, - cmdtp, flag, argc, argv); + cmd_tbl_t *start = ll_entry_start(cmd_tbl_t, cmd); + const int len = ll_entry_count(cmd_tbl_t, cmd); + return _do_help(start, len, cmdtp, flag, argc, argv); } U_BOOT_CMD( @@ -41,7 +41,7 @@ U_BOOT_CMD( ); /* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */ -cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = { +ll_entry_declare(cmd_tbl_t, question_mark, cmd, cmd) = { "?", CONFIG_SYS_MAXARGS, 1, do_help, "alias for 'help'", #ifdef CONFIG_SYS_LONGHELP diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 795814d88f..4438db594c 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -133,7 +133,7 @@ DECLARE_GLOBAL_DATA_PTR; #define DISP_LINE_LEN 16 /* implement possible board specific board init */ -void __def_i2c_init_board(void) +static void __def_i2c_init_board(void) { return; } @@ -141,14 +141,14 @@ void i2c_init_board(void) __attribute__((weak, alias("__def_i2c_init_board"))); /* TODO: Implement architecture-specific get/set functions */ -unsigned int __def_i2c_get_bus_speed(void) +static unsigned int __def_i2c_get_bus_speed(void) { return CONFIG_SYS_I2C_SPEED; } unsigned int i2c_get_bus_speed(void) __attribute__((weak, alias("__def_i2c_get_bus_speed"))); -int __def_i2c_set_bus_speed(unsigned int speed) +static int __def_i2c_set_bus_speed(unsigned int speed) { if (speed != CONFIG_SYS_I2C_SPEED) return -1; @@ -223,6 +223,54 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv return 0; } +static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + u_char chip; + uint devaddr, alen, length; + u_char *memaddr; + + if (argc != 5) + return cmd_usage(cmdtp); + + /* + * memaddr is the address where to store things in memory + */ + memaddr = (u_char *)simple_strtoul(argv[1], NULL, 16); + + /* + * I2C chip address + */ + chip = simple_strtoul(argv[2], NULL, 16); + + /* + * I2C data address within the chip. This can be 1 or + * 2 bytes long. Some day it might be 3 bytes long :-). + */ + devaddr = simple_strtoul(argv[3], NULL, 16); + alen = get_alen(argv[3]); + if (alen > 3) + return cmd_usage(cmdtp); + + /* + * Length is the number of objects, not number of bytes. + */ + length = simple_strtoul(argv[4], NULL, 16); + + while (length-- > 0) { + if (i2c_write(chip, devaddr++, alen, memaddr++, 1) != 0) { + puts("Error writing to the chip.\n"); + return 1; + } +/* + * No write delay with FRAM devices. + */ +#if !defined(CONFIG_SYS_I2C_FRAM) + udelay(11000); +#endif + } + return 0; +} + /* * Syntax: * i2c md {i2c_chip} {addr}{.0, .1, .2} {len} @@ -557,18 +605,28 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg /* * Syntax: - * i2c probe {addr}{.0, .1, .2} + * i2c probe {addr} + * + * Returns zero (success) if one or more I2C devices was found */ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int j; + int addr = -1; + int found = 0; #if defined(CONFIG_SYS_I2C_NOPROBES) int k, skip; uchar bus = GET_BUS_NUM; #endif /* NOPROBES */ + if (argc == 2) + addr = simple_strtol(argv[1], 0, 16); + puts ("Valid chip addresses:"); for (j = 0; j < 128; j++) { + if ((0 <= addr) && (j != addr)) + continue; + #if defined(CONFIG_SYS_I2C_NOPROBES) skip = 0; for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) { @@ -580,8 +638,10 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv if (skip) continue; #endif - if (i2c_probe(j) == 0) + if (i2c_probe(j) == 0) { printf(" %02X", j); + found++; + } } putc ('\n'); @@ -594,7 +654,7 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv putc ('\n'); #endif - return 0; + return (0 == found); } /* @@ -1282,6 +1342,7 @@ static cmd_tbl_t cmd_i2c_sub[] = { U_BOOT_CMD_MKENT(nm, 2, 1, do_i2c_nm, "", ""), U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""), U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""), + U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""), U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""), #if defined(CONFIG_CMD_SDRAM) U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""), @@ -1315,10 +1376,8 @@ static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } /***************************************************/ - -U_BOOT_CMD( - i2c, 6, 1, do_i2c, - "I2C sub-system", +#ifdef CONFIG_SYS_LONGHELP +static char i2c_help_text[] = #if defined(CONFIG_I2C_MUX) "bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c " #endif /* CONFIG_I2C_MUX */ @@ -1331,13 +1390,20 @@ U_BOOT_CMD( "i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n" "i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n" "i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n" - "i2c probe - show devices on the I2C bus\n" + "i2c probe [address] - test for and show device(s) on the I2C bus\n" "i2c read chip address[.0, .1, .2] length memaddress - read to memory \n" + "i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n" "i2c reset - re-init the I2C Controller\n" #if defined(CONFIG_CMD_SDRAM) "i2c sdram chip - print SDRAM configuration information\n" #endif - "i2c speed [speed] - show or set I2C bus speed" + "i2c speed [speed] - show or set I2C bus speed"; +#endif + +U_BOOT_CMD( + i2c, 6, 1, do_i2c, + "I2C sub-system", + i2c_help_text ); #if defined(CONFIG_I2C_MUX) diff --git a/common/cmd_ide.c b/common/cmd_ide.c index bae7767310..0105bdbb7f 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -38,14 +38,6 @@ # include <pcmcia.h> #endif -#ifdef CONFIG_8xx -# include <mpc8xx.h> -#endif - -#ifdef CONFIG_MPC5xxx -#include <mpc5xxx.h> -#endif - #include <ide.h> #include <ata.h> @@ -53,10 +45,6 @@ # include <status_led.h> #endif -#ifdef CONFIG_IDE_8xx_DIRECT -DECLARE_GLOBAL_DATA_PTR; -#endif - #ifdef __PPC__ # define EIEIO __asm__ volatile ("eieio") # define SYNC __asm__ volatile ("sync") @@ -65,45 +53,6 @@ DECLARE_GLOBAL_DATA_PTR; # define SYNC /* nothing */ #endif -#ifdef CONFIG_IDE_8xx_DIRECT -/* Timings for IDE Interface - * - * SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk - * 70 165 30 PIO-Mode 0, [ns] - * 4 9 2 [Cycles] - * 50 125 20 PIO-Mode 1, [ns] - * 3 7 2 [Cycles] - * 30 100 15 PIO-Mode 2, [ns] - * 2 6 1 [Cycles] - * 30 80 10 PIO-Mode 3, [ns] - * 2 5 1 [Cycles] - * 25 70 10 PIO-Mode 4, [ns] - * 2 4 1 [Cycles] - */ - -const static pio_config_t pio_config_ns [IDE_MAX_PIO_MODE+1] = -{ - /* Setup Length Hold */ - { 70, 165, 30 }, /* PIO-Mode 0, [ns] */ - { 50, 125, 20 }, /* PIO-Mode 1, [ns] */ - { 30, 101, 15 }, /* PIO-Mode 2, [ns] */ - { 30, 80, 10 }, /* PIO-Mode 3, [ns] */ - { 25, 70, 10 }, /* PIO-Mode 4, [ns] */ -}; - -static pio_config_t pio_config_clk [IDE_MAX_PIO_MODE+1]; - -#ifndef CONFIG_SYS_PIO_MODE -#define CONFIG_SYS_PIO_MODE 0 /* use a relaxed default */ -#endif -static int pio_mode = CONFIG_SYS_PIO_MODE; - -/* Make clock cycles and always round up */ - -#define PCMCIA_MK_CLKS( t, T ) (( (t) * (T) + 999U ) / 1000U ) - -#endif /* CONFIG_IDE_8xx_DIRECT */ - /* ------------------------------------------------------------------------- */ /* Current I/O Device */ @@ -124,19 +73,6 @@ static int ide_bus_ok[CONFIG_SYS_IDE_MAXBUS]; block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE]; /* ------------------------------------------------------------------------- */ -#ifdef CONFIG_IDE_LED -# if !defined(CONFIG_BMS2003) && \ - !defined(CONFIG_CPC45) && \ - !defined(CONFIG_KUP4K) && \ - !defined(CONFIG_KUP4X) -static void ide_led (uchar led, uchar status); -#else -extern void ide_led (uchar led, uchar status); -#endif -#else -#define ide_led(a,b) /* dummy */ -#endif - #ifdef CONFIG_IDE_RESET static void ide_reset (void); #else @@ -152,8 +88,6 @@ static uchar ide_wait (int dev, ulong t); #define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */ -static void input_data(int dev, ulong *sect_buf, int words); -static void output_data(int dev, const ulong *sect_buf, int words); static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); #ifndef CONFIG_SYS_ATA_PORT_ADDR @@ -162,14 +96,11 @@ static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len #ifdef CONFIG_ATAPI static void atapi_inquiry(block_dev_desc_t *dev_desc); -ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer); +static ulong atapi_read(int device, ulong blknr, lbaint_t blkcnt, + void *buffer); #endif -#ifdef CONFIG_IDE_8xx_DIRECT -static void set_pcmcia_timing (int pmode); -#endif - /* ------------------------------------------------------------------------- */ int do_ide(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) @@ -339,6 +270,33 @@ int do_diskboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) /* ------------------------------------------------------------------------- */ +void __ide_led(uchar led, uchar status) +{ +#if defined(CONFIG_IDE_LED) && defined(PER8_BASE) /* required by LED_PORT */ + static uchar led_buffer; /* Buffer for current LED status */ + + uchar *led_port = LED_PORT; + + if (status) /* switch LED on */ + led_buffer |= led; + else /* switch LED off */ + led_buffer &= ~led; + + *led_port = led_buffer; +#endif +} + +void ide_led(uchar led, uchar status) + __attribute__ ((weak, alias("__ide_led"))); + +#ifndef CONFIG_IDE_LED /* define LED macros, they are not used anyways */ +# define DEVICE_LED(x) 0 +# define LED_IDE1 1 +# define LED_IDE2 2 +#endif + +/* ------------------------------------------------------------------------- */ + inline void __ide_outb(int dev, int port, unsigned char val) { debug("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n", @@ -392,25 +350,14 @@ inline int ide_set_piomode(int pio_mode) void ide_init(void) { - -#ifdef CONFIG_IDE_8xx_DIRECT - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia); -#endif unsigned char c; int i, bus; -#if defined(CONFIG_SC3) - unsigned int ata_reset_time = ATA_RESET_TIME; -#endif #ifdef CONFIG_IDE_8xx_PCCARD - extern int pcmcia_on(void); extern int ide_devices_found; /* Initialized in check_ide_device() */ #endif /* CONFIG_IDE_8xx_PCCARD */ #ifdef CONFIG_IDE_PREINIT - extern int ide_preinit(void); - WATCHDOG_RESET(); if (ide_preinit()) { @@ -419,40 +366,8 @@ void ide_init(void) } #endif /* CONFIG_IDE_PREINIT */ -#ifdef CONFIG_IDE_8xx_PCCARD - extern int pcmcia_on(void); - extern int ide_devices_found; /* Initialized in check_ide_device() */ - WATCHDOG_RESET(); - ide_devices_found = 0; - /* initialize the PCMCIA IDE adapter card */ - pcmcia_on(); - if (!ide_devices_found) - return; - udelay(1000000); /* 1 s */ -#endif /* CONFIG_IDE_8xx_PCCARD */ - - WATCHDOG_RESET(); - -#ifdef CONFIG_IDE_8xx_DIRECT - /* Initialize PIO timing tables */ - for (i = 0; i <= IDE_MAX_PIO_MODE; ++i) { - pio_config_clk[i].t_setup = - PCMCIA_MK_CLKS(pio_config_ns[i].t_setup, gd->bus_clk); - pio_config_clk[i].t_length = - PCMCIA_MK_CLKS(pio_config_ns[i].t_length, - gd->bus_clk); - pio_config_clk[i].t_hold = - PCMCIA_MK_CLKS(pio_config_ns[i].t_hold, gd->bus_clk); - debug("PIO Mode %d: setup=%2d ns/%d clk" " len=%3d ns/%d clk" - " hold=%2d ns/%d clk\n", i, pio_config_ns[i].t_setup, - pio_config_clk[i].t_setup, pio_config_ns[i].t_length, - pio_config_clk[i].t_length, pio_config_ns[i].t_hold, - pio_config_clk[i].t_hold); - } -#endif /* CONFIG_IDE_8xx_DIRECT */ - /* * Reset the IDE just to be sure. * Light LED's to show @@ -462,14 +377,14 @@ void ide_init(void) /* ATAPI Drives seems to need a proper IDE Reset */ ide_reset(); -#ifdef CONFIG_IDE_8xx_DIRECT - /* PCMCIA / IDE initialization for common mem space */ - pcmp->pcmc_pgcrb = 0; +#ifdef CONFIG_IDE_INIT_POSTRESET + WATCHDOG_RESET(); - /* start in PIO mode 0 - most relaxed timings */ - pio_mode = 0; - set_pcmcia_timing(pio_mode); -#endif /* CONFIG_IDE_8xx_DIRECT */ + if (ide_init_postreset()) { + puts("ide_preinit_postreset failed\n"); + return; + } +#endif /* CONFIG_IDE_INIT_POSTRESET */ /* * Wait for IDE to get ready. @@ -502,11 +417,7 @@ void ide_init(void) c = ide_inb(dev, ATA_STATUS); i++; -#if defined(CONFIG_SC3) - if (i > (ata_reset_time * 100)) { -#else if (i > (ATA_RESET_TIME * 100)) { -#endif puts("** Timeout **\n"); /* LED's off */ ide_led((LED_IDE1 | LED_IDE2), 0); @@ -538,9 +449,7 @@ void ide_init(void) curr_device = -1; for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; ++i) { -#ifdef CONFIG_IDE_LED int led = (IDE_BUS(i) == 0) ? LED_IDE1 : LED_IDE2; -#endif ide_dev_desc[i].type = DEV_TYPE_UNKNOWN; ide_dev_desc[i].if_type = IF_TYPE_IDE; ide_dev_desc[i].dev = i; @@ -575,120 +484,26 @@ block_dev_desc_t *ide_get_dev(int dev) } #endif +/* ------------------------------------------------------------------------- */ -#ifdef CONFIG_IDE_8xx_DIRECT - -static void set_pcmcia_timing(int pmode) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia); - ulong timings; - - debug("Set timing for PIO Mode %d\n", pmode); - - timings = PCMCIA_SHT(pio_config_clk[pmode].t_hold) - | PCMCIA_SST(pio_config_clk[pmode].t_setup) - | PCMCIA_SL(pio_config_clk[pmode].t_length); - - /* - * IDE 0 - */ - pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_PBR0; - pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0 -#if (CONFIG_SYS_PCMCIA_POR0 != 0) - | timings -#endif - ; - debug("PBR0: %08x POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0); - - pcmp->pcmc_pbr1 = CONFIG_SYS_PCMCIA_PBR1; - pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1 -#if (CONFIG_SYS_PCMCIA_POR1 != 0) - | timings -#endif - ; - debug("PBR1: %08x POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1); - - pcmp->pcmc_pbr2 = CONFIG_SYS_PCMCIA_PBR2; - pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2 -#if (CONFIG_SYS_PCMCIA_POR2 != 0) - | timings -#endif - ; - debug("PBR2: %08x POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2); - - pcmp->pcmc_pbr3 = CONFIG_SYS_PCMCIA_PBR3; - pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3 -#if (CONFIG_SYS_PCMCIA_POR3 != 0) - | timings -#endif - ; - debug("PBR3: %08x POR3: %08x\n", pcmp->pcmc_pbr3, pcmp->pcmc_por3); - - /* - * IDE 1 - */ - pcmp->pcmc_pbr4 = CONFIG_SYS_PCMCIA_PBR4; - pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4 -#if (CONFIG_SYS_PCMCIA_POR4 != 0) - | timings -#endif - ; - debug("PBR4: %08x POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4); - - pcmp->pcmc_pbr5 = CONFIG_SYS_PCMCIA_PBR5; - pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5 -#if (CONFIG_SYS_PCMCIA_POR5 != 0) - | timings -#endif - ; - debug("PBR5: %08x POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5); - - pcmp->pcmc_pbr6 = CONFIG_SYS_PCMCIA_PBR6; - pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6 -#if (CONFIG_SYS_PCMCIA_POR6 != 0) - | timings -#endif - ; - debug("PBR6: %08x POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6); - - pcmp->pcmc_pbr7 = CONFIG_SYS_PCMCIA_PBR7; - pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7 -#if (CONFIG_SYS_PCMCIA_POR7 != 0) - | timings -#endif - ; - debug("PBR7: %08x POR7: %08x\n", pcmp->pcmc_pbr7, pcmp->pcmc_por7); - -} +void ide_input_swap_data(int dev, ulong *sect_buf, int words) + __attribute__ ((weak, alias("__ide_input_swap_data"))); -#endif /* CONFIG_IDE_8xx_DIRECT */ +void ide_input_data(int dev, ulong *sect_buf, int words) + __attribute__ ((weak, alias("__ide_input_data"))); -/* ------------------------------------------------------------------------- */ +void ide_output_data(int dev, const ulong *sect_buf, int words) + __attribute__ ((weak, alias("__ide_output_data"))); /* We only need to swap data if we are running on a big endian cpu. */ -/* But Au1x00 cpu:s already swaps data in big endian mode! */ -#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SOC_AU1X00) -#define input_swap_data(x,y,z) input_data(x,y,z) -#else -static void input_swap_data(int dev, ulong *sect_buf, int words) +#if defined(__LITTLE_ENDIAN) +void __ide_input_swap_data(int dev, ulong *sect_buf, int words) { -#if defined(CONFIG_CPC45) - uchar i; - volatile uchar *pbuf_even = - (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); - volatile uchar *pbuf_odd = - (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); - ushort *dbuf = (ushort *) sect_buf; - - while (words--) { - for (i = 0; i < 2; i++) { - *(((uchar *) (dbuf)) + 1) = *pbuf_even; - *(uchar *) dbuf = *pbuf_odd; - dbuf += 1; - } - } + ide_input_data(dev, sect_buf, words); +} #else +void __ide_input_swap_data(int dev, ulong *sect_buf, int words) +{ volatile ushort *pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); ushort *dbuf = (ushort *) sect_buf; @@ -700,64 +515,32 @@ static void input_swap_data(int dev, ulong *sect_buf, int words) #ifdef __MIPS__ *dbuf++ = swab16p((u16 *) pbuf); *dbuf++ = swab16p((u16 *) pbuf); -#elif defined(CONFIG_PCS440EP) - *dbuf++ = *pbuf; - *dbuf++ = *pbuf; #else *dbuf++ = ld_le16(pbuf); *dbuf++ = ld_le16(pbuf); #endif /* !MIPS */ } -#endif } -#endif /* __LITTLE_ENDIAN || CONFIG_AU1X00 */ +#endif /* __LITTLE_ENDIAN */ #if defined(CONFIG_IDE_SWAP_IO) -static void output_data(int dev, const ulong *sect_buf, int words) +void __ide_output_data(int dev, const ulong *sect_buf, int words) { -#if defined(CONFIG_CPC45) - uchar *dbuf; - volatile uchar *pbuf_even; - volatile uchar *pbuf_odd; - - pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); - pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); - dbuf = (uchar *) sect_buf; - while (words--) { - EIEIO; - *pbuf_even = *dbuf++; - EIEIO; - *pbuf_odd = *dbuf++; - EIEIO; - *pbuf_even = *dbuf++; - EIEIO; - *pbuf_odd = *dbuf++; - } -#else ushort *dbuf; volatile ushort *pbuf; pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG); dbuf = (ushort *) sect_buf; while (words--) { -#if defined(CONFIG_PCS440EP) - /* not tested, because CF was write protected */ - EIEIO; - *pbuf = ld_le16(dbuf++); - EIEIO; - *pbuf = ld_le16(dbuf++); -#else EIEIO; *pbuf = *dbuf++; EIEIO; *pbuf = *dbuf++; -#endif } -#endif } #else /* ! CONFIG_IDE_SWAP_IO */ -static void output_data(int dev, const ulong *sect_buf, int words) +void __ide_output_data(int dev, const ulong *sect_buf, int words) { #if defined(CONFIG_IDE_AHB) ide_write_data(dev, sect_buf, words); @@ -768,31 +551,8 @@ static void output_data(int dev, const ulong *sect_buf, int words) #endif /* CONFIG_IDE_SWAP_IO */ #if defined(CONFIG_IDE_SWAP_IO) -static void input_data(int dev, ulong *sect_buf, int words) +void __ide_input_data(int dev, ulong *sect_buf, int words) { -#if defined(CONFIG_CPC45) - uchar *dbuf; - volatile uchar *pbuf_even; - volatile uchar *pbuf_odd; - - pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); - pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); - dbuf = (uchar *) sect_buf; - while (words--) { - *dbuf++ = *pbuf_even; - EIEIO; - SYNC; - *dbuf++ = *pbuf_odd; - EIEIO; - SYNC; - *dbuf++ = *pbuf_even; - EIEIO; - SYNC; - *dbuf++ = *pbuf_odd; - EIEIO; - SYNC; - } -#else ushort *dbuf; volatile ushort *pbuf; @@ -802,22 +562,14 @@ static void input_data(int dev, ulong *sect_buf, int words) debug("in input data base for read is %lx\n", (unsigned long) pbuf); while (words--) { -#if defined(CONFIG_PCS440EP) - EIEIO; - *dbuf++ = ld_le16(pbuf); - EIEIO; - *dbuf++ = ld_le16(pbuf); -#else EIEIO; *dbuf++ = *pbuf; EIEIO; *dbuf++ = *pbuf; -#endif } -#endif } #else /* ! CONFIG_IDE_SWAP_IO */ -static void input_data(int dev, ulong *sect_buf, int words) +void __ide_input_data(int dev, ulong *sect_buf, int words) { #if defined(CONFIG_IDE_AHB) ide_read_data(dev, sect_buf, words); @@ -927,7 +679,7 @@ static void ide_ident(block_dev_desc_t *dev_desc) return; #endif - input_swap_data(device, (ulong *)&iop, ATA_SECTORWORDS); + ide_input_swap_data(device, (ulong *)&iop, ATA_SECTORWORDS); ident_cpy((unsigned char *) dev_desc->revision, iop.fw_rev, sizeof(dev_desc->revision)); @@ -1075,7 +827,7 @@ static void ide_ident(block_dev_desc_t *dev_desc) /* ------------------------------------------------------------------------- */ -ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer) +ulong ide_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer) { ulong n = 0; unsigned char c; @@ -1089,7 +841,7 @@ ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer) lba48 = 1; } #endif - debug("ide_read dev %d start %lX, blocks %lX buffer at %lX\n", + debug("ide_read dev %d start %lX, blocks " LBAF " buffer at %lX\n", device, blknr, blkcnt, (ulong) buffer); ide_led(DEVICE_LED(device), 1); /* LED on */ @@ -1179,17 +931,12 @@ ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer) if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) != ATA_STAT_DRQ) { -#if defined(CONFIG_SYS_64BIT_LBA) - printf("Error (no IRQ) dev %d blk %lld: status 0x%02x\n", + printf("Error (no IRQ) dev %d blk %ld: status %#02x\n", device, blknr, c); -#else - printf("Error (no IRQ) dev %d blk %ld: status 0x%02x\n", - device, (ulong) blknr, c); -#endif break; } - input_data(device, buffer, ATA_SECTORWORDS); + ide_input_data(device, buffer, ATA_SECTORWORDS); (void) ide_inb(device, ATA_STATUS); /* clear IRQ */ ++n; @@ -1204,7 +951,7 @@ IDE_READ_E: /* ------------------------------------------------------------------------- */ -ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, const void *buffer) +ulong ide_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer) { ulong n = 0; unsigned char c; @@ -1272,17 +1019,12 @@ ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, const void *buffer) if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) != ATA_STAT_DRQ) { -#if defined(CONFIG_SYS_64BIT_LBA) - printf("Error (no IRQ) dev %d blk %lld: status 0x%02x\n", + printf("Error (no IRQ) dev %d blk %ld: status %#02x\n", device, blknr, c); -#else - printf("Error (no IRQ) dev %d blk %ld: status 0x%02x\n", - device, (ulong) blknr, c); -#endif goto WR_OUT; } - output_data(device, buffer, ATA_SECTORWORDS); + ide_output_data(device, buffer, ATA_SECTORWORDS); c = ide_inb(device, ATA_STATUS); /* clear IRQ */ ++n; ++blknr; @@ -1352,9 +1094,6 @@ extern void ide_set_reset(int idereset); static void ide_reset(void) { -#if defined(CONFIG_SYS_PB_12V_ENABLE) || defined(CONFIG_SYS_PB_IDE_MOTOR) - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; -#endif int i; curr_device = -1; @@ -1370,51 +1109,6 @@ static void ide_reset(void) WATCHDOG_RESET(); -#ifdef CONFIG_SYS_PB_12V_ENABLE - /* 12V Enable output OFF */ - immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_12V_ENABLE); - - immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_12V_ENABLE); - immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_12V_ENABLE); - immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_12V_ENABLE; - - /* wait 500 ms for the voltage to stabilize */ - for (i = 0; i < 500; ++i) - udelay(1000); - - /* 12V Enable output ON */ - immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_12V_ENABLE; -#endif /* CONFIG_SYS_PB_12V_ENABLE */ - -#ifdef CONFIG_SYS_PB_IDE_MOTOR - /* configure IDE Motor voltage monitor pin as input */ - immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_IDE_MOTOR); - immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_IDE_MOTOR); - immr->im_cpm.cp_pbdir &= ~(CONFIG_SYS_PB_IDE_MOTOR); - - /* wait up to 1 s for the motor voltage to stabilize */ - for (i = 0; i < 1000; ++i) { - if ((immr->im_cpm.cp_pbdat & CONFIG_SYS_PB_IDE_MOTOR) != 0) { - break; - } - udelay(1000); - } - - if (i == 1000) { /* Timeout */ - printf("\nWarning: 5V for IDE Motor missing\n"); -#ifdef CONFIG_STATUS_LED -#ifdef STATUS_LED_YELLOW - status_led_set(STATUS_LED_YELLOW, STATUS_LED_ON); -#endif -#ifdef STATUS_LED_GREEN - status_led_set(STATUS_LED_GREEN, STATUS_LED_OFF); -#endif -#endif /* CONFIG_STATUS_LED */ - } -#endif /* CONFIG_SYS_PB_IDE_MOTOR */ - - WATCHDOG_RESET(); - /* de-assert RESET signal */ ide_set_reset(0); @@ -1427,27 +1121,6 @@ static void ide_reset(void) /* ------------------------------------------------------------------------- */ -#if defined(CONFIG_IDE_LED) && \ - !defined(CONFIG_CPC45) && \ - !defined(CONFIG_KUP4K) && \ - !defined(CONFIG_KUP4X) - -static uchar led_buffer; /* Buffer for current LED status */ - -static void ide_led(uchar led, uchar status) -{ - uchar *led_port = LED_PORT; - - if (status) /* switch LED on */ - led_buffer |= led; - else /* switch LED off */ - led_buffer &= ~led; - - *led_port = led_buffer; -} - -#endif /* CONFIG_IDE_LED */ - #if defined(CONFIG_OF_IDE_FIXUP) int ide_device_present(int dev) { @@ -1463,25 +1136,18 @@ int ide_device_present(int dev) * ATAPI Support */ +void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts) + __attribute__ ((weak, alias("__ide_input_data_shorts"))); + +void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts) + __attribute__ ((weak, alias("__ide_output_data_shorts"))); + + #if defined(CONFIG_IDE_SWAP_IO) /* since ATAPI may use commands with not 4 bytes alligned length * we have our own transfer functions, 2 bytes alligned */ -static void output_data_shorts(int dev, ushort *sect_buf, int shorts) +void __ide_output_data_shorts(int dev, ushort *sect_buf, int shorts) { -#if defined(CONFIG_CPC45) - uchar *dbuf; - volatile uchar *pbuf_even; - volatile uchar *pbuf_odd; - - pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); - pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); - while (shorts--) { - EIEIO; - *pbuf_even = *dbuf++; - EIEIO; - *pbuf_odd = *dbuf++; - } -#else ushort *dbuf; volatile ushort *pbuf; @@ -1495,25 +1161,10 @@ static void output_data_shorts(int dev, ushort *sect_buf, int shorts) EIEIO; *pbuf = *dbuf++; } -#endif } -static void input_data_shorts(int dev, ushort *sect_buf, int shorts) +void __ide_input_data_shorts(int dev, ushort *sect_buf, int shorts) { -#if defined(CONFIG_CPC45) - uchar *dbuf; - volatile uchar *pbuf_even; - volatile uchar *pbuf_odd; - - pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN); - pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD); - while (shorts--) { - EIEIO; - *dbuf++ = *pbuf_even; - EIEIO; - *dbuf++ = *pbuf_odd; - } -#else ushort *dbuf; volatile ushort *pbuf; @@ -1527,16 +1178,15 @@ static void input_data_shorts(int dev, ushort *sect_buf, int shorts) EIEIO; *dbuf++ = *pbuf; } -#endif } #else /* ! CONFIG_IDE_SWAP_IO */ -static void output_data_shorts(int dev, ushort *sect_buf, int shorts) +void __ide_output_data_shorts(int dev, ushort *sect_buf, int shorts) { outsw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, shorts); } -static void input_data_shorts(int dev, ushort *sect_buf, int shorts) +void __ide_input_data_shorts(int dev, ushort *sect_buf, int shorts) { insw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, shorts); } @@ -1615,7 +1265,7 @@ unsigned char atapi_issue(int device, unsigned char *ccb, int ccblen, } /* write command block */ - output_data_shorts(device, (unsigned short *) ccb, ccblen / 2); + ide_output_data_shorts(device, (unsigned short *) ccb, ccblen / 2); /* ATAPI Command written wait for completition */ udelay(5000); /* device must set bsy */ @@ -1666,12 +1316,12 @@ unsigned char atapi_issue(int device, unsigned char *ccb, int ccblen, /* ok now decide if it is an in or output */ if ((ide_inb(device, ATA_SECT_CNT) & 0x02) == 0) { debug("Write to device\n"); - output_data_shorts(device, (unsigned short *) buffer, - n); + ide_output_data_shorts(device, + (unsigned short *) buffer, n); } else { debug("Read from device @ %p shorts %d\n", buffer, n); - input_data_shorts(device, (unsigned short *) buffer, - n); + ide_input_data_shorts(device, + (unsigned short *) buffer, n); } } udelay(5000); /* seems that some CD ROMs need this... */ @@ -1859,13 +1509,13 @@ static void atapi_inquiry(block_dev_desc_t *dev_desc) #define ATAPI_READ_BLOCK_SIZE 2048 /* assuming CD part */ #define ATAPI_READ_MAX_BLOCK (ATAPI_READ_MAX_BYTES/ATAPI_READ_BLOCK_SIZE) -ulong atapi_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer) +ulong atapi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer) { ulong n = 0; unsigned char ccb[12]; /* Command descriptor block */ ulong cnt; - debug("atapi_read dev %d start %lX, blocks %lX buffer at %lX\n", + debug("atapi_read dev %d start %lX, blocks " LBAF " buffer at %lX\n", device, blknr, blkcnt, (ulong) buffer); do { diff --git a/common/cmd_irq.c b/common/cmd_irq.c index 9f158ef6e3..1e82883bd4 100644 --- a/common/cmd_irq.c +++ b/common/cmd_irq.c @@ -24,7 +24,8 @@ #include <config.h> #include <command.h> -int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { if (argc != 2) diff --git a/common/cmd_itest.c b/common/cmd_itest.c index d5df758a1f..2c8e5d05e1 100644 --- a/common/cmd_itest.c +++ b/common/cmd_itest.c @@ -130,7 +130,7 @@ static int arithcomp (char *s, char *t, int op, int w) return (0); } -int binary_test (char *op, char *arg1, char *arg2, int w) +static int binary_test(char *op, char *arg1, char *arg2, int w) { int len, i; const op_tbl_t *optp; @@ -155,7 +155,7 @@ int binary_test (char *op, char *arg1, char *arg2, int w) } /* command line interface to the shell test */ -int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] ) +static int do_itest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int value, w; diff --git a/common/cmd_load.c b/common/cmd_load.c index f4d66deae3..2c8dab1a0a 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -34,15 +34,15 @@ DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_CMD_LOADB) -static ulong load_serial_ymodem (ulong offset); +static ulong load_serial_ymodem(ulong offset); #endif #if defined(CONFIG_CMD_LOADS) -static ulong load_serial (long offset); -static int read_record (char *buf, ulong len); +static ulong load_serial(long offset); +static int read_record(char *buf, ulong len); # if defined(CONFIG_CMD_SAVES) -static int save_serial (ulong offset, ulong size); -static int write_record (char *buf); +static int save_serial(ulong offset, ulong size); +static int write_record(char *buf); #endif static int do_echo = 1; @@ -51,7 +51,8 @@ static int do_echo = 1; /* -------------------------------------------------------------------- */ #if defined(CONFIG_CMD_LOADS) -int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_load_serial(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { long offset = 0; ulong addr; @@ -82,11 +83,11 @@ int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) load_baudrate = current_baudrate; } if (load_baudrate != current_baudrate) { - printf ("## Switch baudrate to %d bps and press ENTER ...\n", + printf("## Switch baudrate to %d bps and press ENTER ...\n", load_baudrate); udelay(50000); gd->baudrate = load_baudrate; - serial_setbrg (); + serial_setbrg(); udelay(50000); for (;;) { if (getc() == '\r') @@ -99,9 +100,9 @@ int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */ - printf ("## Ready for S-Record download ...\n"); + printf("## Ready for S-Record download ...\n"); - addr = load_serial (offset); + addr = load_serial(offset); /* * Gather any trailing characters (for instance, the ^D which @@ -116,21 +117,21 @@ int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } if (addr == ~0) { - printf ("## S-Record download aborted\n"); + printf("## S-Record download aborted\n"); rcode = 1; } else { - printf ("## Start Addr = 0x%08lX\n", addr); + printf("## Start Addr = 0x%08lX\n", addr); load_addr = addr; } #ifdef CONFIG_SYS_LOADS_BAUD_CHANGE if (load_baudrate != current_baudrate) { - printf ("## Switch baudrate to %d bps and press ESC ...\n", + printf("## Switch baudrate to %d bps and press ESC ...\n", current_baudrate); - udelay (50000); + udelay(50000); gd->baudrate = current_baudrate; - serial_setbrg (); - udelay (50000); + serial_setbrg(); + udelay(50000); for (;;) { if (getc() == 0x1B) /* ESC */ break; @@ -140,8 +141,7 @@ int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return rcode; } -static ulong -load_serial (long offset) +static ulong load_serial(long offset) { char record[SREC_MAXRECLEN + 1]; /* buffer for one S-Record */ char binbuf[SREC_MAXBINLEN]; /* buffer for binary data */ @@ -156,7 +156,7 @@ load_serial (long offset) int line_count = 0; while (read_record(record, SREC_MAXRECLEN + 1) >= 0) { - type = srec_decode (record, &binlen, &addr, binbuf); + type = srec_decode(record, &binlen, &addr, binbuf); if (type < 0) { return (~0); /* Invalid S-Record */ @@ -173,13 +173,13 @@ load_serial (long offset) rc = flash_write((char *)binbuf,store_addr,binlen); if (rc != 0) { - flash_perror (rc); + flash_perror(rc); return (~0); } } else #endif { - memcpy ((char *)(store_addr), binbuf, binlen); + memcpy((char *)(store_addr), binbuf, binlen); } if ((store_addr) < start_addr) start_addr = store_addr; @@ -189,15 +189,15 @@ load_serial (long offset) case SREC_END2: case SREC_END3: case SREC_END4: - udelay (10000); + udelay(10000); size = end_addr - start_addr + 1; - printf ("\n" + printf("\n" "## First Load Addr = 0x%08lX\n" "## Last Load Addr = 0x%08lX\n" "## Total Size = 0x%08lX = %ld Bytes\n", start_addr, end_addr, size, size ); - flush_cache (start_addr, size); + flush_cache(start_addr, size); sprintf(buf, "%lX", size); setenv("filesize", buf); return (addr); @@ -208,15 +208,14 @@ load_serial (long offset) } if (!do_echo) { /* print a '.' every 100 lines */ if ((++line_count % 100) == 0) - putc ('.'); + putc('.'); } } return (~0); /* Download aborted */ } -static int -read_record (char *buf, ulong len) +static int read_record(char *buf, ulong len) { char *p; char c; @@ -226,7 +225,7 @@ read_record (char *buf, ulong len) for (p=buf; p < buf+len; ++p) { c = getc(); /* read character */ if (do_echo) - putc (c); /* ... and echo it */ + putc(c); /* ... and echo it */ switch (c) { case '\r': @@ -280,11 +279,11 @@ int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) save_baudrate = current_baudrate; } if (save_baudrate != current_baudrate) { - printf ("## Switch baudrate to %d bps and press ENTER ...\n", + printf("## Switch baudrate to %d bps and press ENTER ...\n", save_baudrate); udelay(50000); gd->baudrate = save_baudrate; - serial_setbrg (); + serial_setbrg(); udelay(50000); for (;;) { if (getc() == '\r') @@ -297,24 +296,24 @@ int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */ - printf ("## Ready for S-Record upload, press ENTER to proceed ...\n"); + printf("## Ready for S-Record upload, press ENTER to proceed ...\n"); for (;;) { if (getc() == '\r') break; } - if(save_serial (offset, size)) { - printf ("## S-Record upload aborted\n"); + if (save_serial(offset, size)) { + printf("## S-Record upload aborted\n"); } else { - printf ("## S-Record upload complete\n"); + printf("## S-Record upload complete\n"); } #ifdef CONFIG_SYS_LOADS_BAUD_CHANGE if (save_baudrate != current_baudrate) { - printf ("## Switch baudrate to %d bps and press ESC ...\n", + printf("## Switch baudrate to %d bps and press ESC ...\n", (int)current_baudrate); - udelay (50000); + udelay(50000); gd->baudrate = current_baudrate; - serial_setbrg (); - udelay (50000); + serial_setbrg(); + udelay(50000); for (;;) { if (getc() == 0x1B) /* ESC */ break; @@ -329,7 +328,7 @@ int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #define SREC3_END "S70500000000FA\n" #define SREC_BYTES_PER_RECORD 16 -static int save_serial (ulong address, ulong count) +static int save_serial(ulong address, ulong count) { int i, c, reclen, checksum, length; char *hex = "0123456789ABCDEF"; @@ -384,8 +383,7 @@ static int save_serial (ulong address, ulong count) return(0); } -static int -write_record (char *buf) +static int write_record(char *buf) { char c; @@ -425,15 +423,16 @@ write_record (char *buf) static void set_kerm_bin_mode(unsigned long *); static int k_recv(void); -static ulong load_serial_bin (ulong offset); +static ulong load_serial_bin(ulong offset); -char his_eol; /* character he needs at end of packet */ -int his_pad_count; /* number of pad chars he needs */ -char his_pad_char; /* pad chars he needs */ -char his_quote; /* quote chars he'll use */ +static char his_eol; /* character he needs at end of packet */ +static int his_pad_count; /* number of pad chars he needs */ +static char his_pad_char; /* pad chars he needs */ +static char his_quote; /* quote chars he'll use */ -int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_load_serial_bin(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { ulong offset = 0; ulong addr; @@ -463,11 +462,11 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ } if (load_baudrate != current_baudrate) { - printf ("## Switch baudrate to %d bps and press ENTER ...\n", + printf("## Switch baudrate to %d bps and press ENTER ...\n", load_baudrate); udelay(50000); gd->baudrate = load_baudrate; - serial_setbrg (); + serial_setbrg(); udelay(50000); for (;;) { if (getc() == '\r') @@ -476,37 +475,37 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ } if (strcmp(argv[0],"loady")==0) { - printf ("## Ready for binary (ymodem) download " + printf("## Ready for binary (ymodem) download " "to 0x%08lX at %d bps...\n", offset, load_baudrate); - addr = load_serial_ymodem (offset); + addr = load_serial_ymodem(offset); } else { - printf ("## Ready for binary (kermit) download " + printf("## Ready for binary (kermit) download " "to 0x%08lX at %d bps...\n", offset, load_baudrate); - addr = load_serial_bin (offset); + addr = load_serial_bin(offset); if (addr == ~0) { load_addr = 0; - printf ("## Binary (kermit) download aborted\n"); + printf("## Binary (kermit) download aborted\n"); rcode = 1; } else { - printf ("## Start Addr = 0x%08lX\n", addr); + printf("## Start Addr = 0x%08lX\n", addr); load_addr = addr; } } if (load_baudrate != current_baudrate) { - printf ("## Switch baudrate to %d bps and press ESC ...\n", + printf("## Switch baudrate to %d bps and press ESC ...\n", current_baudrate); - udelay (50000); + udelay(50000); gd->baudrate = current_baudrate; - serial_setbrg (); - udelay (50000); + serial_setbrg(); + udelay(50000); for (;;) { if (getc() == 0x1B) /* ESC */ break; @@ -517,13 +516,13 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ } -static ulong load_serial_bin (ulong offset) +static ulong load_serial_bin(ulong offset) { int size, i; char buf[32]; - set_kerm_bin_mode ((ulong *) offset); - size = k_recv (); + set_kerm_bin_mode((ulong *) offset); + size = k_recv(); /* * Gather any trailing characters (for instance, the ^D which @@ -537,7 +536,7 @@ static ulong load_serial_bin (ulong offset) udelay(1000); } - flush_cache (offset, size); + flush_cache(offset, size); printf("## Total Size = 0x%08x = %d Bytes\n", size, size); sprintf(buf, "%X", size); @@ -546,16 +545,16 @@ static ulong load_serial_bin (ulong offset) return offset; } -void send_pad (void) +static void send_pad(void) { int count = his_pad_count; while (count-- > 0) - putc (his_pad_char); + putc(his_pad_char); } /* converts escaped kermit char to binary char */ -char ktrans (char in) +static char ktrans(char in) { if ((in & 0x60) == 0x40) { return (char) (in & ~0x40); @@ -565,7 +564,7 @@ char ktrans (char in) return in; } -int chk1 (char *buffer) +static int chk1(char *buffer) { int total = 0; @@ -575,67 +574,67 @@ int chk1 (char *buffer) return (int) ((total + ((total >> 6) & 0x03)) & 0x3f); } -void s1_sendpacket (char *packet) +static void s1_sendpacket(char *packet) { - send_pad (); + send_pad(); while (*packet) { - putc (*packet++); + putc(*packet++); } } static char a_b[24]; -void send_ack (int n) +static void send_ack(int n) { a_b[0] = START_CHAR; - a_b[1] = tochar (3); - a_b[2] = tochar (n); + a_b[1] = tochar(3); + a_b[2] = tochar(n); a_b[3] = ACK_TYPE; a_b[4] = '\0'; - a_b[4] = tochar (chk1 (&a_b[1])); + a_b[4] = tochar(chk1(&a_b[1])); a_b[5] = his_eol; a_b[6] = '\0'; - s1_sendpacket (a_b); + s1_sendpacket(a_b); } -void send_nack (int n) +static void send_nack(int n) { a_b[0] = START_CHAR; - a_b[1] = tochar (3); - a_b[2] = tochar (n); + a_b[1] = tochar(3); + a_b[2] = tochar(n); a_b[3] = NACK_TYPE; a_b[4] = '\0'; - a_b[4] = tochar (chk1 (&a_b[1])); + a_b[4] = tochar(chk1(&a_b[1])); a_b[5] = his_eol; a_b[6] = '\0'; - s1_sendpacket (a_b); + s1_sendpacket(a_b); } -void (*os_data_init) (void); -void (*os_data_char) (char new_char); +static void (*os_data_init)(void); +static void (*os_data_char)(char new_char); static int os_data_state, os_data_state_saved; static char *os_data_addr, *os_data_addr_saved; static char *bin_start_address; -static void bin_data_init (void) +static void bin_data_init(void) { os_data_state = 0; os_data_addr = bin_start_address; } -static void os_data_save (void) +static void os_data_save(void) { os_data_state_saved = os_data_state; os_data_addr_saved = os_data_addr; } -static void os_data_restore (void) +static void os_data_restore(void) { os_data_state = os_data_state_saved; os_data_addr = os_data_addr_saved; } -static void bin_data_char (char new_char) +static void bin_data_char(char new_char) { switch (os_data_state) { case 0: /* data */ @@ -644,7 +643,7 @@ static void bin_data_char (char new_char) } } -static void set_kerm_bin_mode (unsigned long *addr) +static void set_kerm_bin_mode(unsigned long *addr) { bin_start_address = (char *) addr; os_data_init = bin_data_init; @@ -654,29 +653,29 @@ static void set_kerm_bin_mode (unsigned long *addr) /* k_data_* simply handles the kermit escape translations */ static int k_data_escape, k_data_escape_saved; -void k_data_init (void) +static void k_data_init(void) { k_data_escape = 0; - os_data_init (); + os_data_init(); } -void k_data_save (void) +static void k_data_save(void) { k_data_escape_saved = k_data_escape; - os_data_save (); + os_data_save(); } -void k_data_restore (void) +static void k_data_restore(void) { k_data_escape = k_data_escape_saved; - os_data_restore (); + os_data_restore(); } -void k_data_char (char new_char) +static void k_data_char(char new_char) { if (k_data_escape) { /* last char was escape - translate this character */ - os_data_char (ktrans (new_char)); + os_data_char(ktrans(new_char)); k_data_escape = 0; } else { if (new_char == his_quote) { @@ -684,18 +683,18 @@ void k_data_char (char new_char) k_data_escape = 1; } else { /* otherwise send this char as-is */ - os_data_char (new_char); + os_data_char(new_char); } } } #define SEND_DATA_SIZE 20 -char send_parms[SEND_DATA_SIZE]; -char *send_ptr; +static char send_parms[SEND_DATA_SIZE]; +static char *send_ptr; /* handle_send_packet interprits the protocol info and builds and sends an appropriate ack for what we can do */ -void handle_send_packet (int n) +static void handle_send_packet(int n) { int length = 3; int bytes; @@ -715,30 +714,30 @@ void handle_send_packet (int n) break; /* handle MAXL - max length */ /* ignore what he says - most I'll take (here) is 94 */ - a_b[++length] = tochar (94); + a_b[++length] = tochar(94); if (bytes-- <= 0) break; /* handle TIME - time you should wait for my packets */ /* ignore what he says - don't wait for my ack longer than 1 second */ - a_b[++length] = tochar (1); + a_b[++length] = tochar(1); if (bytes-- <= 0) break; /* handle NPAD - number of pad chars I need */ /* remember what he says - I need none */ - his_pad_count = untochar (send_parms[2]); - a_b[++length] = tochar (0); + his_pad_count = untochar(send_parms[2]); + a_b[++length] = tochar(0); if (bytes-- <= 0) break; /* handle PADC - pad chars I need */ /* remember what he says - I need none */ - his_pad_char = ktrans (send_parms[3]); + his_pad_char = ktrans(send_parms[3]); a_b[++length] = 0x40; /* He should ignore this */ if (bytes-- <= 0) break; /* handle EOL - end of line he needs */ /* remember what he says - I need CR */ - his_eol = untochar (send_parms[4]); - a_b[++length] = tochar (END_CHAR); + his_eol = untochar(send_parms[4]); + a_b[++length] = tochar(END_CHAR); if (bytes-- <= 0) break; /* handle QCTL - quote control char he'll use */ @@ -764,25 +763,25 @@ void handle_send_packet (int n) break; /* handle CAPAS - the capabilities mask */ /* ignore what he says - I only do long packets - I don't do windows */ - a_b[++length] = tochar (2); /* only long packets */ - a_b[++length] = tochar (0); /* no windows */ - a_b[++length] = tochar (94); /* large packet msb */ - a_b[++length] = tochar (94); /* large packet lsb */ + a_b[++length] = tochar(2); /* only long packets */ + a_b[++length] = tochar(0); /* no windows */ + a_b[++length] = tochar(94); /* large packet msb */ + a_b[++length] = tochar(94); /* large packet lsb */ } while (0); a_b[0] = START_CHAR; - a_b[1] = tochar (length); - a_b[2] = tochar (n); + a_b[1] = tochar(length); + a_b[2] = tochar(n); a_b[3] = ACK_TYPE; a_b[++length] = '\0'; - a_b[length] = tochar (chk1 (&a_b[1])); + a_b[length] = tochar(chk1(&a_b[1])); a_b[++length] = his_eol; a_b[++length] = '\0'; - s1_sendpacket (a_b); + s1_sendpacket(a_b); } /* k_recv receives a OS Open image file over kermit line */ -static int k_recv (void) +static int k_recv(void) { char new_char; char k_state, k_state_saved; @@ -801,9 +800,9 @@ static int k_recv (void) /* initialize the k_recv and k_data state machine */ done = 0; k_state = 0; - k_data_init (); + k_data_init(); k_state_saved = k_state; - k_data_save (); + k_data_save(); n = 0; /* just to get rid of a warning */ last_n = -1; @@ -848,17 +847,17 @@ static int k_recv (void) START: /* get length of packet */ sum = 0; - new_char = getc (); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; - length = untochar (new_char); + length = untochar(new_char); /* get sequence number */ - new_char = getc (); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; - n = untochar (new_char); + n = untochar(new_char); --length; /* NEW CODE - check sequence numbers for retried packets */ @@ -871,17 +870,17 @@ START: if (n == last_n) { /* same sequence number, restore the previous state */ k_state = k_state_saved; - k_data_restore (); + k_data_restore(); } else { /* new sequence number, checkpoint the download */ last_n = n; k_state_saved = k_state; - k_data_save (); + k_data_save(); } /* END NEW CODE */ /* get packet type */ - new_char = getc (); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; @@ -891,29 +890,29 @@ START: if (length == -2) { /* (length byte was 0, decremented twice) */ /* get the two length bytes */ - new_char = getc (); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; - len_hi = untochar (new_char); - new_char = getc (); + len_hi = untochar(new_char); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; - len_lo = untochar (new_char); + len_lo = untochar(new_char); length = len_hi * 95 + len_lo; /* check header checksum */ - new_char = getc (); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; - if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f)) + if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f)) goto packet_error; sum += new_char & 0xff; /* --length; */ /* new length includes only data and block check to come */ } /* bring in rest of packet */ while (length > 1) { - new_char = getc (); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; sum += new_char & 0xff; @@ -930,26 +929,26 @@ START: } } /* get and validate checksum character */ - new_char = getc (); + new_char = getc(); if ((new_char & 0xE0) == 0) goto packet_error; - if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f)) + if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f)) goto packet_error; /* get END_CHAR */ - new_char = getc (); + new_char = getc(); if (new_char != END_CHAR) { packet_error: /* restore state machines */ k_state = k_state_saved; - k_data_restore (); + k_data_restore(); /* send a negative acknowledge packet in */ - send_nack (n); + send_nack(n); } else if (k_state == SEND_TYPE) { /* crack the protocol parms, build an appropriate ack packet */ - handle_send_packet (n); + handle_send_packet(n); } else { /* send simple acknowledge packet in */ - send_ack (n); + send_ack(n); /* quit if end of transmission */ if (k_state == BREAK_TYPE) done = 1; @@ -963,7 +962,7 @@ static int getcxmodem(void) { return (getc()); return -1; } -static ulong load_serial_ymodem (ulong offset) +static ulong load_serial_ymodem(ulong offset) { int size; char buf[32]; @@ -976,19 +975,19 @@ static ulong load_serial_ymodem (ulong offset) size = 0; info.mode = xyzModem_ymodem; - res = xyzModem_stream_open (&info, &err); + res = xyzModem_stream_open(&info, &err); if (!res) { while ((res = - xyzModem_stream_read (ymodemBuf, 1024, &err)) > 0) { + xyzModem_stream_read(ymodemBuf, 1024, &err)) > 0) { store_addr = addr + offset; size += res; addr += res; #ifndef CONFIG_SYS_NO_FLASH - if (addr2info (store_addr)) { + if (addr2info(store_addr)) { int rc; - rc = flash_write ((char *) ymodemBuf, + rc = flash_write((char *) ymodemBuf, store_addr, res); if (rc != 0) { flash_perror (rc); @@ -997,24 +996,24 @@ static ulong load_serial_ymodem (ulong offset) } else #endif { - memcpy ((char *) (store_addr), ymodemBuf, + memcpy((char *)(store_addr), ymodemBuf, res); } } } else { - printf ("%s\n", xyzModem_error (err)); + printf("%s\n", xyzModem_error(err)); } - xyzModem_stream_close (&err); - xyzModem_stream_terminate (false, &getcxmodem); + xyzModem_stream_close(&err); + xyzModem_stream_terminate(false, &getcxmodem); - flush_cache (offset, size); + flush_cache(offset, size); - printf ("## Total Size = 0x%08x = %d Bytes\n", size, size); - sprintf (buf, "%X", size); - setenv ("filesize", buf); + printf("## Total Size = 0x%08x = %d Bytes\n", size, size); + sprintf(buf, "%X", size); + setenv("filesize", buf); return offset; } @@ -1091,7 +1090,7 @@ U_BOOT_CMD( /* -------------------------------------------------------------------- */ #if defined(CONFIG_CMD_HWFLOW) -int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_hwflow(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { extern int hwflow_onoff(int); diff --git a/common/cmd_mdio.c b/common/cmd_mdio.c index 77d8df12c5..ff0063b30d 100644 --- a/common/cmd_mdio.c +++ b/common/cmd_mdio.c @@ -57,9 +57,9 @@ static int extract_range(char *input, int *plo, int *phi) return 0; } -int mdio_write_ranges(struct mii_dev *bus, int addrlo, - int addrhi, int devadlo, int devadhi, - int reglo, int reghi, unsigned short data) +static int mdio_write_ranges(struct mii_dev *bus, int addrlo, + int addrhi, int devadlo, int devadhi, + int reglo, int reghi, unsigned short data) { int addr, devad, reg; int err = 0; @@ -79,9 +79,9 @@ err_out: return err; } -int mdio_read_ranges(struct mii_dev *bus, int addrlo, - int addrhi, int devadlo, int devadhi, - int reglo, int reghi) +static int mdio_read_ranges(struct mii_dev *bus, int addrlo, + int addrhi, int devadlo, int devadhi, + int reglo, int reghi) { int addr, devad, reg; @@ -112,8 +112,8 @@ int mdio_read_ranges(struct mii_dev *bus, int addrlo, } /* The register will be in the form [a[-b].]x[-y] */ -int extract_reg_range(char *input, int *devadlo, int *devadhi, - int *reglo, int *reghi) +static int extract_reg_range(char *input, int *devadlo, int *devadhi, + int *reglo, int *reghi) { char *regstr; @@ -141,8 +141,8 @@ int extract_reg_range(char *input, int *devadlo, int *devadhi, return extract_range(regstr, reglo, reghi); } -int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus, - int *addrlo, int *addrhi) +static int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus, + int *addrlo, int *addrhi) { struct phy_device *phydev; diff --git a/common/cmd_mem.c b/common/cmd_mem.c index 18f0a3f50f..4d64cfffde 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -51,7 +51,7 @@ static ulong base_address = 0; * md{.b, .w, .l} {addr} {len} */ #define DISP_LINE_LEN 16 -int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_md(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr, length; #if defined(CONFIG_HAS_DATAFLASH) @@ -147,16 +147,16 @@ int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return (rc); } -int do_mem_mm ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_mm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return mod_mem (cmdtp, 1, flag, argc, argv); } -int do_mem_nm ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_nm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return mod_mem (cmdtp, 0, flag, argc, argv); } -int do_mem_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_mw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr, writeval, count; int size; @@ -253,7 +253,7 @@ int do_mem_mwc ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif /* CONFIG_MX_CYCLIC */ -int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_cmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr1, addr2, count, ngood; int size; @@ -323,7 +323,7 @@ int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return rcode; } -int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_cp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr, dest, count; int size; @@ -433,7 +433,8 @@ int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } -int do_mem_base (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_base(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { if (argc > 1) { /* Set new base address. @@ -446,7 +447,8 @@ int do_mem_base (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } -int do_mem_loop (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_loop(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { ulong addr, length, i; int size; @@ -592,7 +594,8 @@ int do_mem_loopw (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * configured using CONFIG_SYS_ALT_MEMTEST. The complete test loops until * interrupted by ctrl-c or by a failure of one of the sub-tests. */ -int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { vu_long *addr, *start, *end; ulong val; @@ -612,7 +615,7 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_SYS_MEMTEST_SCRATCH) vu_long *dummy = (vu_long*)CONFIG_SYS_MEMTEST_SCRATCH; #else - vu_long *dummy = 0; /* yes, this is address 0x0, not NULL */ + vu_long *dummy = NULL; /* yes, this is address 0x0, not NULL */ #endif int j; @@ -1054,7 +1057,7 @@ mod_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[]) #ifndef CONFIG_CRC32_VERIFY -int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mem_crc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr, length; ulong crc; diff --git a/common/cmd_misc.c b/common/cmd_misc.c index 3b47a0c095..dc2772e85d 100644 --- a/common/cmd_misc.c +++ b/common/cmd_misc.c @@ -27,7 +27,7 @@ #include <common.h> #include <command.h> -int do_sleep (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_sleep(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong start = get_timer(0); ulong delay; @@ -38,10 +38,10 @@ int do_sleep (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) delay = simple_strtoul(argv[1], NULL, 10) * CONFIG_SYS_HZ; while (get_timer(start) < delay) { - if (ctrlc ()) + if (ctrlc()) return (-1); - udelay (100); + udelay(100); } return 0; diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 79a1088f3b..62a1c224d3 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -115,7 +115,7 @@ static void print_mmcinfo(struct mmc *mmc) printf("Bus Width: %d-bit\n", mmc->bus_width); } -int do_mmcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mmcinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { struct mmc *mmc; @@ -147,7 +147,7 @@ U_BOOT_CMD( "- dislay info of the current MMC device" ); -int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { enum mmc_state state; @@ -269,7 +269,7 @@ int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) addr = (void *)simple_strtoul(argv[idx], NULL, 16); ++idx; } else - addr = 0; + addr = NULL; blk = simple_strtoul(argv[idx], NULL, 16); cnt = simple_strtoul(argv[idx + 1], NULL, 16); diff --git a/common/cmd_mp.c b/common/cmd_mp.c index 4b27be4956..2143814d4f 100644 --- a/common/cmd_mp.c +++ b/common/cmd_mp.c @@ -23,7 +23,7 @@ #include <common.h> #include <command.h> -int +static int cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned long cpuid; @@ -61,8 +61,14 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } +#ifdef CONFIG_SYS_LONGHELP +static char cpu_help_text[] = + "<num> reset - Reset cpu <num>\n" + "cpu <num> status - Status of cpu <num>\n" + "cpu <num> disable - Disable cpu <num>\n" + "cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]" #ifdef CONFIG_PPC -#define CPU_ARCH_HELP \ + "\n" " [args] : <pir> <r3> <r6>\n" \ " pir - processor id (if writeable)\n" \ " r3 - value for gpr 3\n" \ @@ -74,16 +80,10 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) " When cpu <num> is released r4 and r5 = 0.\n" \ " r7 will contain the size of the initial mapped area" #endif + ""; +#endif U_BOOT_CMD( cpu, CONFIG_SYS_MAXARGS, 1, cpu_cmd, - "Multiprocessor CPU boot manipulation and release", - "<num> reset - Reset cpu <num>\n" - "cpu <num> status - Status of cpu <num>\n" - "cpu <num> disable - Disable cpu <num>\n" - "cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]" -#ifdef CPU_ARCH_HELP - "\n" - CPU_ARCH_HELP -#endif + "Multiprocessor CPU boot manipulation and release", cpu_help_text ); diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c index 22688293ae..06fc171fe3 100644 --- a/common/cmd_mtdparts.c +++ b/common/cmd_mtdparts.c @@ -147,10 +147,10 @@ static char last_partition[PARTITION_MAXLEN]; extern void jffs2_free_cache(struct part_info *part); /* mtdids mapping list, filled by parse_ids() */ -struct list_head mtdids; +static struct list_head mtdids; /* device/partition list, parse_cmdline() parses into here */ -struct list_head devices; +static struct list_head devices; /* current active device and partition number */ struct mtd_device *current_mtd_dev = NULL; @@ -710,7 +710,7 @@ static int part_parse(const char *const partdef, const char **ret, struct part_i * @param size a pointer to the size of the mtd device (output) * @return 0 if device is valid, 1 otherwise */ -int mtd_device_validate(u8 type, u8 num, u32 *size) +static int mtd_device_validate(u8 type, u8 num, u32 *size) { struct mtd_info *mtd = NULL; @@ -1042,7 +1042,8 @@ static struct mtdids* id_find_by_mtd_id(const char *mtd_id, unsigned int mtd_id_ * @param dev_num parsed device number (output) * @return 0 on success, 1 otherwise */ -int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num) +int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, + u8 *dev_num) { const char *p = id; @@ -1884,7 +1885,7 @@ static struct part_info* mtd_part_info(struct mtd_device *dev, unsigned int part * @param argv arguments list * @return 0 on success, 1 otherwise */ -int do_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { /* command line only */ struct mtd_device *dev; @@ -1922,7 +1923,8 @@ int do_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * @param argv arguments list * @return 0 on success, 1 otherwise */ -int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { if (argc == 2) { if (strcmp(argv[1], "default") == 0) { @@ -2046,9 +2048,8 @@ U_BOOT_CMD( " - change active partition (e.g. part-id = nand0,1)" ); -U_BOOT_CMD( - mtdparts, 6, 0, do_mtdparts, - "define flash/nand partitions", +#ifdef CONFIG_SYS_LONGHELP +static char mtdparts_help_text[] = "\n" " - list partition table\n" "mtdparts delall\n" @@ -2090,6 +2091,11 @@ U_BOOT_CMD( "<size> := standard linux memsize OR '-' to denote all remaining space\n" "<offset> := partition start offset within the device\n" "<name> := '(' NAME ')'\n" - "<ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)" + "<ro-flag> := when set to 'ro' makes partition read-only (not used, passed to kernel)"; +#endif + +U_BOOT_CMD( + mtdparts, 6, 0, do_mtdparts, + "define flash/nand partitions", mtdparts_help_text ); /***************************************************/ diff --git a/common/cmd_nand.c b/common/cmd_nand.c index e24ed7f9c4..4b1606972b 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -373,8 +373,7 @@ static void nand_print_and_set_info(int idx) { nand_info_t *nand = &nand_info[idx]; struct nand_chip *chip = nand->priv; - const int bufsz = 32; - char buf[bufsz]; + char buf[32]; printf("Device %d: ", idx); if (chip->numchips > 1) @@ -429,7 +428,7 @@ static int raw_access(nand_info_t *nand, ulong addr, loff_t off, ulong count, return ret; } -int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int i, ret = 0; ulong addr; @@ -781,9 +780,8 @@ usage: return CMD_RET_USAGE; } -U_BOOT_CMD( - nand, CONFIG_SYS_MAXARGS, 1, do_nand, - "NAND sub-system", +#ifdef CONFIG_SYS_LONGHELP +static char nand_help_text[] = "info - show available NAND devices\n" "nand device [dev] - show or set current device\n" "nand read - addr off|partition size\n" @@ -829,6 +827,12 @@ U_BOOT_CMD( "nand env.oob set off|partition - set enviromnent offset\n" "nand env.oob get - get environment offset" #endif + ""; +#endif + +U_BOOT_CMD( + nand, CONFIG_SYS_MAXARGS, 1, do_nand, + "NAND sub-system", nand_help_text ); static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, @@ -913,7 +917,8 @@ static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand, return bootm_maybe_autostart(cmdtp, cmd); } -int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) +static int do_nandboot(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { char *boot_device = NULL; int idx; diff --git a/common/cmd_net.c b/common/cmd_net.c index a9ade8b927..3b93ef27c0 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -30,9 +30,9 @@ static int netboot_common(enum proto_t, cmd_tbl_t *, int, char * const []); -int do_bootp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_bootp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - return netboot_common (BOOTP, cmdtp, argc, argv); + return netboot_common(BOOTP, cmdtp, argc, argv); } U_BOOT_CMD( @@ -41,7 +41,7 @@ U_BOOT_CMD( "[loadAddress] [[hostIPaddr:]bootfilename]" ); -int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int ret; @@ -91,9 +91,9 @@ U_BOOT_CMD( #ifdef CONFIG_CMD_RARP -int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_rarpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - return netboot_common (RARP, cmdtp, argc, argv); + return netboot_common(RARP, cmdtp, argc, argv); } U_BOOT_CMD( @@ -104,7 +104,7 @@ U_BOOT_CMD( #endif #if defined(CONFIG_CMD_DHCP) -int do_dhcp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_dhcp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return netboot_common(DHCP, cmdtp, argc, argv); } @@ -117,7 +117,7 @@ U_BOOT_CMD( #endif #if defined(CONFIG_CMD_NFS) -int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_nfs(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return netboot_common(NFS, cmdtp, argc, argv); } @@ -129,29 +129,29 @@ U_BOOT_CMD( ); #endif -static void netboot_update_env (void) +static void netboot_update_env(void) { char tmp[22]; if (NetOurGatewayIP) { - ip_to_string (NetOurGatewayIP, tmp); - setenv ("gatewayip", tmp); + ip_to_string(NetOurGatewayIP, tmp); + setenv("gatewayip", tmp); } if (NetOurSubnetMask) { - ip_to_string (NetOurSubnetMask, tmp); - setenv ("netmask", tmp); + ip_to_string(NetOurSubnetMask, tmp); + setenv("netmask", tmp); } if (NetOurHostName[0]) - setenv ("hostname", NetOurHostName); + setenv("hostname", NetOurHostName); if (NetOurRootPath[0]) - setenv ("rootpath", NetOurRootPath); + setenv("rootpath", NetOurRootPath); if (NetOurIP) { - ip_to_string (NetOurIP, tmp); - setenv ("ipaddr", tmp); + ip_to_string(NetOurIP, tmp); + setenv("ipaddr", tmp); } #if !defined(CONFIG_BOOTP_SERVERIP) /* @@ -159,35 +159,35 @@ static void netboot_update_env (void) * could have set it */ if (NetServerIP) { - ip_to_string (NetServerIP, tmp); - setenv ("serverip", tmp); + ip_to_string(NetServerIP, tmp); + setenv("serverip", tmp); } #endif if (NetOurDNSIP) { - ip_to_string (NetOurDNSIP, tmp); - setenv ("dnsip", tmp); + ip_to_string(NetOurDNSIP, tmp); + setenv("dnsip", tmp); } #if defined(CONFIG_BOOTP_DNS2) if (NetOurDNS2IP) { - ip_to_string (NetOurDNS2IP, tmp); - setenv ("dnsip2", tmp); + ip_to_string(NetOurDNS2IP, tmp); + setenv("dnsip2", tmp); } #endif if (NetOurNISDomain[0]) - setenv ("domain", NetOurNISDomain); + setenv("domain", NetOurNISDomain); #if defined(CONFIG_CMD_SNTP) \ && defined(CONFIG_BOOTP_TIMEOFFSET) if (NetTimeOffset) { - sprintf (tmp, "%d", NetTimeOffset); - setenv ("timeoffset", tmp); + sprintf(tmp, "%d", NetTimeOffset); + setenv("timeoffset", tmp); } #endif #if defined(CONFIG_CMD_SNTP) \ && defined(CONFIG_BOOTP_NTPSERVER) if (NetNtpServerIP) { - ip_to_string (NetNtpServerIP, tmp); - setenv ("ntpserverip", tmp); + ip_to_string(NetNtpServerIP, tmp); + setenv("ntpserverip", tmp); } #endif } @@ -224,7 +224,7 @@ static int netboot_common(enum proto_t proto, cmd_tbl_t *cmdtp, int argc, break; case 3: load_addr = simple_strtoul(argv[1], NULL, 16); - copy_filename (BootFile, argv[2], sizeof(BootFile)); + copy_filename(BootFile, argv[2], sizeof(BootFile)); break; @@ -274,7 +274,7 @@ static int netboot_common(enum proto_t proto, cmd_tbl_t *cmdtp, int argc, } #if defined(CONFIG_CMD_PING) -int do_ping (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_ping(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { if (argc < 2) return -1; @@ -322,7 +322,7 @@ static void cdp_update_env(void) } -int do_cdp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_cdp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int r; @@ -345,27 +345,29 @@ U_BOOT_CMD( #endif #if defined(CONFIG_CMD_SNTP) -int do_sntp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +int do_sntp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char *toff; if (argc < 2) { - NetNtpServerIP = getenv_IPaddr ("ntpserverip"); + NetNtpServerIP = getenv_IPaddr("ntpserverip"); if (NetNtpServerIP == 0) { - printf ("ntpserverip not set\n"); + printf("ntpserverip not set\n"); return (1); } } else { NetNtpServerIP = string_to_ip(argv[1]); if (NetNtpServerIP == 0) { - printf ("Bad NTP server IP address\n"); + printf("Bad NTP server IP address\n"); return (1); } } - toff = getenv ("timeoffset"); - if (toff == NULL) NetTimeOffset = 0; - else NetTimeOffset = simple_strtol (toff, NULL, 10); + toff = getenv("timeoffset"); + if (toff == NULL) + NetTimeOffset = 0; + else + NetTimeOffset = simple_strtol(toff, NULL, 10); if (NetLoop(SNTP) < 0) { printf("SNTP failed: host %pI4 not responding\n", diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index 1f9c674260..006131f45c 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -136,7 +136,8 @@ static int env_print(char *name) return 0; } -int do_env_print (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_env_print(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { int i; int rcode = 0; @@ -238,9 +239,6 @@ int env_check_apply(const char *name, const char *oldval, /* Try assigning specified device */ if (console_assign(console, newval) < 0) return 1; - - if (serial_assign(newval) < 0) - return 1; #endif /* CONFIG_CONSOLE_MUX */ } @@ -325,7 +323,7 @@ int env_check_apply(const char *name, const char *oldval, * Set a new environment variable, * or replace or delete an existing one. */ -int _do_env_set(int flag, int argc, char * const argv[]) +static int _do_env_set(int flag, int argc, char * const argv[]) { int i, len; char *name, *value, *s; @@ -438,7 +436,7 @@ int setenv_addr(const char *varname, const void *addr) } #ifndef CONFIG_SPL_BUILD -int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { if (argc < 2) return CMD_RET_USAGE; @@ -517,7 +515,8 @@ int do_env_ask(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) * Interactively edit an environment variable */ #if defined(CONFIG_CMD_EDITENV) -int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { char buffer[CONFIG_SYS_CBSIZE]; char *init_val; @@ -625,7 +624,8 @@ ulong getenv_ulong(const char *name, int base, ulong default_val) #ifndef CONFIG_SPL_BUILD #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE) -int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { printf("Saving Environment to %s...\n", env_name_spec); @@ -1023,9 +1023,8 @@ static int do_env(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return CMD_RET_USAGE; } -U_BOOT_CMD( - env, CONFIG_SYS_MAXARGS, 1, do_env, - "environment handling commands", +#ifdef CONFIG_SYS_LONGHELP +static char env_help_text[] = #if defined(CONFIG_CMD_ASKENV) "ask name [message] [size] - ask for environment variable\nenv " #endif @@ -1050,7 +1049,12 @@ U_BOOT_CMD( #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE) "env save - save environment\n" #endif - "env set [-f] name [arg ...]\n" + "env set [-f] name [arg ...]\n"; +#endif + +U_BOOT_CMD( + env, CONFIG_SYS_MAXARGS, 1, do_env, + "environment handling commands", env_help_text ); /* diff --git a/common/cmd_pci.c b/common/cmd_pci.c index a1fe519f61..8550b64008 100644 --- a/common/cmd_pci.c +++ b/common/cmd_pci.c @@ -35,8 +35,6 @@ #include <asm/io.h> #include <pci.h> -unsigned char ShortPCIListing = 1; - /* * Follows routines for the output of infos about devices on PCI bus. */ @@ -408,7 +406,7 @@ pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag * pci modify[.b, .w, .l] bus.device.function [addr] * pci write[.b, .w, .l] bus.device.function addr value */ -int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong addr = 0, value = 0, size = 0; pci_dev_t bdf = 0; @@ -485,10 +483,8 @@ int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /***************************************************/ - -U_BOOT_CMD( - pci, 5, 1, do_pci, - "list and access PCI Configuration Space", +#ifdef CONFIG_SYS_LONGHELP +static char pci_help_text[] = "[bus] [long]\n" " - short or long list of PCI devices on bus 'bus'\n" #ifdef CONFIG_CMD_PCI_ENUM @@ -504,5 +500,10 @@ U_BOOT_CMD( "pci modify[.b, .w, .l] b.d.f address\n" " - modify, auto increment CFG address\n" "pci write[.b, .w, .l] b.d.f address value\n" - " - write to CFG address" + " - write to CFG address"; +#endif + +U_BOOT_CMD( + pci, 5, 1, do_pci, + "list and access PCI Configuration Space", pci_help_text ); diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c index 908876ce45..08a6563448 100644 --- a/common/cmd_reginfo.c +++ b/common/cmd_reginfo.c @@ -37,7 +37,8 @@ extern void mpc86xx_reginfo(void); extern void mpc85xx_reginfo(void); #endif -int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_reginfo(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { #if defined(CONFIG_8xx) volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; diff --git a/common/cmd_sata.c b/common/cmd_sata.c index 3f98235a38..b401bd1024 100644 --- a/common/cmd_sata.c +++ b/common/cmd_sata.c @@ -28,7 +28,7 @@ #include <part.h> #include <sata.h> -int sata_curr_device = -1; +static int sata_curr_device = -1; block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE]; int __sata_initialize(void) @@ -67,7 +67,7 @@ block_dev_desc_t *sata_get_dev(int dev) } #endif -int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int rc = 0; diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index 22d0119814..266bfa6905 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -34,6 +34,9 @@ #include <image.h> #include <pci.h> +#ifdef CONFIG_SCSI_DEV_LIST +#define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST +#else #ifdef CONFIG_SCSI_SYM53C8XX #define SCSI_VEND_ID 0x1000 #ifndef CONFIG_SCSI_DEV_ID @@ -49,8 +52,12 @@ #elif !defined(CONFIG_SCSI_AHCI_PLAT) #error no scsi device defined #endif +#define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} +#endif - +#ifdef CONFIG_PCI +const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST }; +#endif static ccb tempccb; /* temporary scsi command buffer */ static unsigned char tempbuff[512]; /* temporary data buffer */ @@ -65,14 +72,19 @@ static block_dev_desc_t scsi_dev_desc[CONFIG_SYS_SCSI_MAX_DEVICE]; * forward declerations of some Setup Routines */ void scsi_setup_test_unit_ready(ccb * pccb); -void scsi_setup_read_capacity(ccb * pccb); void scsi_setup_read6(ccb * pccb, unsigned long start, unsigned short blocks); void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks); +static void scsi_setup_write_ext(ccb *pccb, unsigned long start, + unsigned short blocks); void scsi_setup_inquiry(ccb * pccb); void scsi_ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); -ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer); +static int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, + unsigned long *blksz); +static ulong scsi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer); +static ulong scsi_write(int device, ulong blknr, + lbaint_t blkcnt, const void *buffer); /********************************************************************************* @@ -82,7 +94,8 @@ ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer); void scsi_scan(int mode) { unsigned char i,perq,modi,lun; - unsigned long capacity,blksz; + lbaint_t capacity; + unsigned long blksz; ccb* pccb=(ccb *)&tempccb; if(mode==1) { @@ -102,6 +115,7 @@ void scsi_scan(int mode) scsi_dev_desc[i].dev=i; scsi_dev_desc[i].part_type=PART_TYPE_UNKNOWN; scsi_dev_desc[i].block_read=scsi_read; + scsi_dev_desc[i].block_write = scsi_write; } scsi_max_devs=0; for(i=0;i<CONFIG_SYS_SCSI_MAX_SCSI_ID;i++) { @@ -146,16 +160,10 @@ void scsi_scan(int mode) scsi_print_error(pccb); continue; } - pccb->datalen=8; - scsi_setup_read_capacity(pccb); - if(scsi_exec(pccb)!=TRUE) { + if (scsi_read_capacity(pccb, &capacity, &blksz)) { scsi_print_error(pccb); continue; } - capacity=((unsigned long)tempbuff[0]<<24)|((unsigned long)tempbuff[1]<<16)| - ((unsigned long)tempbuff[2]<<8)|((unsigned long)tempbuff[3]); - blksz=((unsigned long)tempbuff[4]<<24)|((unsigned long)tempbuff[5]<<16)| - ((unsigned long)tempbuff[6]<<8)|((unsigned long)tempbuff[7]); scsi_dev_desc[scsi_max_devs].lba=capacity; scsi_dev_desc[scsi_max_devs].blksz=blksz; scsi_dev_desc[scsi_max_devs].type=perq; @@ -172,21 +180,52 @@ removable: scsi_curr_dev=0; else scsi_curr_dev = -1; + + printf("Found %d device(s).\n", scsi_max_devs); + setenv_ulong("scsidevs", scsi_max_devs); +} + +int scsi_get_disk_count(void) +{ + return scsi_max_devs; } #ifdef CONFIG_PCI void scsi_init(void) { int busdevfunc; + int i; + /* + * Find a device from the list, this driver will support a single + * controller. + */ + for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { + /* get PCI Device ID */ + busdevfunc = pci_find_device(scsi_device_list[i].vendor, + scsi_device_list[i].device, + 0); + if (busdevfunc != -1) + break; + } - busdevfunc=pci_find_device(SCSI_VEND_ID,SCSI_DEV_ID,0); /* get PCI Device ID */ - if(busdevfunc==-1) { - printf("Error SCSI Controller (%04X,%04X) not found\n",SCSI_VEND_ID,SCSI_DEV_ID); + if (busdevfunc == -1) { + printf("Error: SCSI Controller(s) "); + for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) { + printf("%04X:%04X ", + scsi_device_list[i].vendor, + scsi_device_list[i].device); + } + printf("not found\n"); return; } #ifdef DEBUG else { - printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n",SCSI_VEND_ID,SCSI_DEV_ID,(busdevfunc>>16)&0xFF,(busdevfunc>>11)&0x1F,(busdevfunc>>8)&0x7); + printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n", + scsi_device_list[i].vendor, + scsi_device_list[i].device, + (busdevfunc >> 16) & 0xFF, + (busdevfunc >> 11) & 0x1F, + (busdevfunc >> 8) & 0x7); } #endif scsi_low_level_init(busdevfunc); @@ -305,6 +344,19 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) n = scsi_read(scsi_curr_dev, blk, cnt, (ulong *)addr); printf ("%ld blocks read: %s\n",n,(n==cnt) ? "OK" : "ERROR"); return 0; + } else if (strcmp(argv[1], "write") == 0) { + ulong addr = simple_strtoul(argv[2], NULL, 16); + ulong blk = simple_strtoul(argv[3], NULL, 16); + ulong cnt = simple_strtoul(argv[4], NULL, 16); + ulong n; + printf("\nSCSI write: device %d block # %ld, " + "count %ld ... ", + scsi_curr_dev, blk, cnt); + n = scsi_write(scsi_curr_dev, blk, cnt, + (ulong *)addr); + printf("%ld blocks written: %s\n", n, + (n == cnt) ? "OK" : "ERROR"); + return 0; } } /* switch */ return CMD_RET_USAGE; @@ -316,9 +368,10 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #define SCSI_MAX_READ_BLK 0xFFFF /* almost the maximum amount of the scsi_ext command.. */ -ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer) +static ulong scsi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer) { - ulong start,blks, buf_addr; + lbaint_t start, blks; + uintptr_t buf_addr; unsigned short smallblks; ccb* pccb=(ccb *)&tempccb; device&=0xff; @@ -329,7 +382,9 @@ ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer) buf_addr=(unsigned long)buffer; start=blknr; blks=blkcnt; - debug ("\nscsi_read: dev %d startblk %lx, blccnt %lx buffer %lx\n",device,start,blks,(unsigned long)buffer); + debug("\nscsi_read: dev %d startblk " LBAF + ", blccnt " LBAF " buffer %lx\n", + device, start, blks, (unsigned long)buffer); do { pccb->pdata=(unsigned char *)buf_addr; if(blks>SCSI_MAX_READ_BLK) { @@ -346,7 +401,9 @@ ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer) start+=blks; blks=0; } - debug ("scsi_read_ext: startblk %lx, blccnt %x buffer %lx\n",start,smallblks,buf_addr); + debug("scsi_read_ext: startblk " LBAF + ", blccnt %x buffer %lx\n", + start, smallblks, buf_addr); if(scsi_exec(pccb)!=TRUE) { scsi_print_error(pccb); blkcnt-=blks; @@ -354,10 +411,65 @@ ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer) } buf_addr+=pccb->datalen; } while(blks!=0); - debug ("scsi_read_ext: end startblk %lx, blccnt %x buffer %lx\n",start,smallblks,buf_addr); + debug("scsi_read_ext: end startblk " LBAF + ", blccnt %x buffer %lx\n", start, smallblks, buf_addr); return(blkcnt); } +/******************************************************************************* + * scsi_write + */ + +/* Almost the maximum amount of the scsi_ext command.. */ +#define SCSI_MAX_WRITE_BLK 0xFFFF + +static ulong scsi_write(int device, ulong blknr, + lbaint_t blkcnt, const void *buffer) +{ + lbaint_t start, blks; + uintptr_t buf_addr; + unsigned short smallblks; + ccb* pccb = (ccb *)&tempccb; + device &= 0xff; + /* Setup device + */ + pccb->target = scsi_dev_desc[device].target; + pccb->lun = scsi_dev_desc[device].lun; + buf_addr = (unsigned long)buffer; + start = blknr; + blks = blkcnt; + debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", + __func__, device, start, blks, (unsigned long)buffer); + do { + pccb->pdata = (unsigned char *)buf_addr; + if (blks > SCSI_MAX_WRITE_BLK) { + pccb->datalen = (scsi_dev_desc[device].blksz * + SCSI_MAX_WRITE_BLK); + smallblks = SCSI_MAX_WRITE_BLK; + scsi_setup_write_ext(pccb, start, smallblks); + start += SCSI_MAX_WRITE_BLK; + blks -= SCSI_MAX_WRITE_BLK; + } else { + pccb->datalen = scsi_dev_desc[device].blksz * blks; + smallblks = (unsigned short)blks; + scsi_setup_write_ext(pccb, start, smallblks); + start += blks; + blks = 0; + } + debug("%s: startblk " LBAF ", blccnt %x buffer %lx\n", + __func__, start, smallblks, buf_addr); + if (scsi_exec(pccb) != TRUE) { + scsi_print_error(pccb); + blkcnt -= blks; + break; + } + buf_addr += pccb->datalen; + } while (blks != 0); + debug("%s: end startblk " LBAF ", blccnt %x buffer %lx\n", + __func__, start, smallblks, buf_addr); + return blkcnt; +} + /* copy src to dest, skipping leading and trailing blanks * and null terminate the string */ @@ -398,6 +510,67 @@ void scsi_trim_trail (unsigned char *str, unsigned int len) } } +int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz) +{ + *capacity = 0; + + memset(pccb->cmd, 0, sizeof(pccb->cmd)); + pccb->cmd[0] = SCSI_RD_CAPAC10; + pccb->cmd[1] = pccb->lun << 5; + pccb->cmdlen = 10; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ + + pccb->datalen = 8; + if (scsi_exec(pccb) != TRUE) + return 1; + + *capacity = ((lbaint_t)pccb->pdata[0] << 24) | + ((lbaint_t)pccb->pdata[1] << 16) | + ((lbaint_t)pccb->pdata[2] << 8) | + ((lbaint_t)pccb->pdata[3]); + + if (*capacity != 0xffffffff) { + /* Read capacity (10) was sufficient for this drive. */ + *blksz = ((unsigned long)pccb->pdata[4] << 24) | + ((unsigned long)pccb->pdata[5] << 16) | + ((unsigned long)pccb->pdata[6] << 8) | + ((unsigned long)pccb->pdata[7]); + return 0; + } + + /* Read capacity (10) was insufficient. Use read capacity (16). */ + + memset(pccb->cmd, 0, sizeof(pccb->cmd)); + pccb->cmd[0] = SCSI_RD_CAPAC16; + pccb->cmd[1] = 0x10; + pccb->cmdlen = 16; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ + + pccb->datalen = 16; + if (scsi_exec(pccb) != TRUE) + return 1; + + *capacity = ((uint64_t)pccb->pdata[0] << 56) | + ((uint64_t)pccb->pdata[1] << 48) | + ((uint64_t)pccb->pdata[2] << 40) | + ((uint64_t)pccb->pdata[3] << 32) | + ((uint64_t)pccb->pdata[4] << 24) | + ((uint64_t)pccb->pdata[5] << 16) | + ((uint64_t)pccb->pdata[6] << 8) | + ((uint64_t)pccb->pdata[7]); + + *blksz = ((uint64_t)pccb->pdata[8] << 56) | + ((uint64_t)pccb->pdata[9] << 48) | + ((uint64_t)pccb->pdata[10] << 40) | + ((uint64_t)pccb->pdata[11] << 32) | + ((uint64_t)pccb->pdata[12] << 24) | + ((uint64_t)pccb->pdata[13] << 16) | + ((uint64_t)pccb->pdata[14] << 8) | + ((uint64_t)pccb->pdata[15]); + + return 0; +} + /************************************************************************************ * Some setup (fill-in) routines @@ -414,23 +587,6 @@ void scsi_setup_test_unit_ready(ccb * pccb) pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ } -void scsi_setup_read_capacity(ccb * pccb) -{ - pccb->cmd[0]=SCSI_RD_CAPAC; - pccb->cmd[1]=pccb->lun<<5; - pccb->cmd[2]=0; - pccb->cmd[3]=0; - pccb->cmd[4]=0; - pccb->cmd[5]=0; - pccb->cmd[6]=0; - pccb->cmd[7]=0; - pccb->cmd[8]=0; - pccb->cmd[9]=0; - pccb->cmdlen=10; - pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */ - -} - void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks) { pccb->cmd[0]=SCSI_READ10; @@ -451,6 +607,27 @@ void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks) pccb->cmd[7],pccb->cmd[8]); } +void scsi_setup_write_ext(ccb *pccb, unsigned long start, unsigned short blocks) +{ + pccb->cmd[0] = SCSI_WRITE10; + pccb->cmd[1] = pccb->lun << 5; + pccb->cmd[2] = ((unsigned char) (start>>24)) & 0xff; + pccb->cmd[3] = ((unsigned char) (start>>16)) & 0xff; + pccb->cmd[4] = ((unsigned char) (start>>8)) & 0xff; + pccb->cmd[5] = ((unsigned char) (start)) & 0xff; + pccb->cmd[6] = 0; + pccb->cmd[7] = ((unsigned char) (blocks>>8)) & 0xff; + pccb->cmd[8] = (unsigned char)blocks & 0xff; + pccb->cmd[9] = 0; + pccb->cmdlen = 10; + pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */ + debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n", + __func__, + pccb->cmd[0], pccb->cmd[1], + pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5], + pccb->cmd[7], pccb->cmd[8]); +} + void scsi_setup_read6(ccb * pccb, unsigned long start, unsigned short blocks) { pccb->cmd[0]=SCSI_READ6; @@ -492,7 +669,9 @@ U_BOOT_CMD( "scsi device [dev] - show or set current device\n" "scsi part [dev] - print partition table of one or all SCSI devices\n" "scsi read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n" - " to memory address `addr'" + " to memory address `addr'\n" + "scsi write addr blk# cnt - write `cnt' blocks starting at block\n" + " `blk#' from memory address `addr'" ); U_BOOT_CMD( diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c index 1b3edb7b02..7b140deea3 100644 --- a/common/cmd_setexpr.c +++ b/common/cmd_setexpr.c @@ -50,7 +50,7 @@ static ulong get_arg(char *s, int w) } } -int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { ulong a, b; char buf[16]; diff --git a/common/cmd_source.c b/common/cmd_source.c index c4cde982a5..02a862cc5a 100644 --- a/common/cmd_source.c +++ b/common/cmd_source.c @@ -177,9 +177,8 @@ do_source (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return rcode; } -U_BOOT_CMD( - source, 2, 0, do_source, - "run script from memory", +#ifdef CONFIG_SYS_LONGHELP +static char source_help_text[] = "[addr]\n" "\t- run script starting at addr\n" "\t- A valid image header must be present" @@ -188,5 +187,11 @@ U_BOOT_CMD( "For FIT format uImage addr must include subimage\n" "unit name in the form of addr:<subimg_uname>" #endif + ""; +#endif + +U_BOOT_CMD( + source, 2, 0, do_source, + "run script from memory", source_help_text ); #endif diff --git a/common/cmd_test.c b/common/cmd_test.c index 6da06b9f78..d4ec18672e 100644 --- a/common/cmd_test.c +++ b/common/cmd_test.c @@ -24,7 +24,7 @@ #include <common.h> #include <command.h> -int do_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char * const *ap; int left, adv, expr, last_expr, neg, last_cmp; @@ -150,7 +150,7 @@ U_BOOT_CMD( "[args..]" ); -int do_false(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_false(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return 1; } @@ -161,7 +161,7 @@ U_BOOT_CMD( NULL ); -int do_true(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_true(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return 0; } diff --git a/common/cmd_usb.c b/common/cmd_usb.c index c128455d74..8ad0b23058 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -40,7 +40,7 @@ static int usb_ether_curr_dev = -1; /* current ethernet device */ #endif /* some display routines (info command) */ -char *usb_get_class_desc(unsigned char dclass) +static char *usb_get_class_desc(unsigned char dclass) { switch (dclass) { case USB_CLASS_PER_INTERFACE: @@ -66,8 +66,8 @@ char *usb_get_class_desc(unsigned char dclass) } } -void usb_display_class_sub(unsigned char dclass, unsigned char subclass, - unsigned char proto) +static void usb_display_class_sub(unsigned char dclass, unsigned char subclass, + unsigned char proto) { switch (dclass) { case USB_CLASS_PER_INTERFACE: @@ -148,7 +148,7 @@ void usb_display_class_sub(unsigned char dclass, unsigned char subclass, } } -void usb_display_string(struct usb_device *dev, int index) +static void usb_display_string(struct usb_device *dev, int index) { ALLOC_CACHE_ALIGN_BUFFER(char, buffer, 256); @@ -158,7 +158,7 @@ void usb_display_string(struct usb_device *dev, int index) } } -void usb_display_desc(struct usb_device *dev) +static void usb_display_desc(struct usb_device *dev) { if (dev->descriptor.bDescriptorType == USB_DT_DEVICE) { printf("%d: %s, USB Revision %x.%x\n", dev->devnum, @@ -192,8 +192,8 @@ void usb_display_desc(struct usb_device *dev) } -void usb_display_conf_desc(struct usb_configuration_descriptor *config, - struct usb_device *dev) +static void usb_display_conf_desc(struct usb_configuration_descriptor *config, + struct usb_device *dev) { printf(" Configuration: %d\n", config->bConfigurationValue); printf(" - Interfaces: %d %s%s%dmA\n", config->bNumInterfaces, @@ -207,8 +207,8 @@ void usb_display_conf_desc(struct usb_configuration_descriptor *config, } } -void usb_display_if_desc(struct usb_interface_descriptor *ifdesc, - struct usb_device *dev) +static void usb_display_if_desc(struct usb_interface_descriptor *ifdesc, + struct usb_device *dev) { printf(" Interface: %d\n", ifdesc->bInterfaceNumber); printf(" - Alternate Setting %d, Endpoints: %d\n", @@ -224,7 +224,7 @@ void usb_display_if_desc(struct usb_interface_descriptor *ifdesc, } } -void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc) +static void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc) { printf(" - Endpoint %d %s ", epdesc->bEndpointAddress & 0xf, (epdesc->bEndpointAddress & 0x80) ? "In" : "Out"); @@ -249,7 +249,7 @@ void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc) } /* main routine to diasplay the configs, interfaces and endpoints */ -void usb_display_config(struct usb_device *dev) +static void usb_display_config(struct usb_device *dev) { struct usb_config *config; struct usb_interface *ifdesc; @@ -280,7 +280,7 @@ static inline char *portspeed(int speed) } /* shows the device tree recursively */ -void usb_show_tree_graph(struct usb_device *dev, char *pre) +static void usb_show_tree_graph(struct usb_device *dev, char *pre) { int i, index; int has_child, last_child; @@ -340,7 +340,7 @@ void usb_show_tree_graph(struct usb_device *dev, char *pre) } /* main routine for the tree command */ -void usb_show_tree(struct usb_device *dev) +static void usb_show_tree(struct usb_device *dev) { char preamble[32]; @@ -353,7 +353,7 @@ void usb_show_tree(struct usb_device *dev) * usb boot command intepreter. Derived from diskboot */ #ifdef CONFIG_USB_STORAGE -int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { return common_diskboot(cmdtp, "usb", argc, argv); } @@ -363,7 +363,7 @@ int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) /****************************************************************************** * usb command intepreter */ -int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { int i; diff --git a/common/cmd_version.c b/common/cmd_version.c index e4b2ac1efc..ab4c560ae0 100644 --- a/common/cmd_version.c +++ b/common/cmd_version.c @@ -28,7 +28,7 @@ const char __weak version_string[] = U_BOOT_VERSION_STRING; -int do_version(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_version(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { printf("\n%s\n", version_string); #ifdef CC_VERSION_STRING diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c index 0414589bad..42a7eba766 100644 --- a/common/cmd_ximg.c +++ b/common/cmd_ximg.c @@ -42,7 +42,7 @@ #define CONFIG_SYS_XIMG_LEN 0x800000 #endif -int +static int do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { ulong addr = load_addr; @@ -264,9 +264,8 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 0; } -U_BOOT_CMD( - imxtract, 4, 1, do_imgextract, - "extract a part of a multi-image", +#ifdef CONFIG_SYS_LONGHELP +static char imgextract_help_text[] = "addr part [dest]\n" " - extract <part> from legacy image at <addr> and copy to <dest>" #if defined(CONFIG_FIT) @@ -274,4 +273,10 @@ U_BOOT_CMD( "addr uname [dest]\n" " - extract <uname> subimage from FIT image at <addr> and copy to <dest>" #endif + ""; +#endif + +U_BOOT_CMD( + imxtract, 4, 1, do_imgextract, + "extract a part of a multi-image", imgextract_help_text ); diff --git a/common/cmd_zfs.c b/common/cmd_zfs.c index d580f7bca0..1df0c4d72a 100644 --- a/common/cmd_zfs.c +++ b/common/cmd_zfs.c @@ -46,7 +46,7 @@ #define DOS_FS_TYPE_OFFSET 0x36 #define DOS_FS32_TYPE_OFFSET 0x52 -static int do_zfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +static int do_zfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char *filename = NULL; int dev; @@ -146,7 +146,7 @@ int zfs_print(const char *entry, const struct zfs_dirhook_info *data) -static int do_zfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +static int do_zfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { const char *filename = "/"; int part; diff --git a/common/command.c b/common/command.c index aa0fb0a3d3..50c84292c1 100644 --- a/common/command.c +++ b/common/command.c @@ -137,8 +137,9 @@ cmd_tbl_t *find_cmd_tbl (const char *cmd, cmd_tbl_t *table, int table_len) cmd_tbl_t *find_cmd (const char *cmd) { - int len = &__u_boot_cmd_end - &__u_boot_cmd_start; - return find_cmd_tbl(cmd, &__u_boot_cmd_start, len); + cmd_tbl_t *start = ll_entry_start(cmd_tbl_t, cmd); + const int len = ll_entry_count(cmd_tbl_t, cmd); + return find_cmd_tbl(cmd, start, len); } int cmd_usage(const cmd_tbl_t *cmdtp) @@ -181,7 +182,9 @@ int var_complete(int argc, char * const argv[], char last_char, int maxv, char * static int complete_cmdv(int argc, char * const argv[], char last_char, int maxv, char *cmdv[]) { - cmd_tbl_t *cmdtp; + cmd_tbl_t *cmdtp = ll_entry_start(cmd_tbl_t, cmd); + const int count = ll_entry_count(cmd_tbl_t, cmd); + const cmd_tbl_t *cmdend = cmdtp + count; const char *p; int len, clen; int n_found = 0; @@ -195,12 +198,12 @@ static int complete_cmdv(int argc, char * const argv[], char last_char, int maxv if (argc == 0) { /* output full list of commands */ - for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) { + for (; cmdtp != cmdend; cmdtp++) { if (n_found >= maxv - 2) { - cmdv[n_found++] = "..."; + cmdv[n_found] = "..."; break; } - cmdv[n_found++] = cmdtp->name; + cmdv[n_found] = cmdtp->name; } cmdv[n_found] = NULL; return n_found; @@ -228,7 +231,7 @@ static int complete_cmdv(int argc, char * const argv[], char last_char, int maxv len = p - cmd; /* return the partial matches */ - for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) { + for (; cmdtp != cmdend; cmdtp++) { clen = strlen(cmdtp->name); if (clen < len) diff --git a/common/dlmalloc.c b/common/dlmalloc.c index 1d7e527b9d..b2f0a1ad52 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -1465,7 +1465,7 @@ typedef struct malloc_chunk* mbinptr; #define IAV(i) bin_at(i), bin_at(i) static mbinptr av_[NAV * 2 + 2] = { - 0, 0, + NULL, NULL, IAV(0), IAV(1), IAV(2), IAV(3), IAV(4), IAV(5), IAV(6), IAV(7), IAV(8), IAV(9), IAV(10), IAV(11), IAV(12), IAV(13), IAV(14), IAV(15), IAV(16), IAV(17), IAV(18), IAV(19), IAV(20), IAV(21), IAV(22), IAV(23), @@ -2173,10 +2173,10 @@ Void_t* mALLOc(bytes) size_t bytes; /* check if mem_malloc_init() was run */ if ((mem_malloc_start == 0) && (mem_malloc_end == 0)) { /* not initialized yet */ - return 0; + return NULL; } - if ((long)bytes < 0) return 0; + if ((long)bytes < 0) return NULL; nb = request2size(bytes); /* padded request size; */ @@ -2379,7 +2379,7 @@ Void_t* mALLOc(bytes) size_t bytes; /* Try to extend */ malloc_extend_top(nb); if ( (remainder_size = chunksize(top) - nb) < (long)MINSIZE) - return 0; /* propagate failure */ + return NULL; /* propagate failure */ } victim = top; @@ -2433,7 +2433,7 @@ void fREe(mem) Void_t* mem; mchunkptr fwd; /* misc temp for linking */ int islr; /* track whether merging with last_remainder */ - if (mem == 0) /* free(0) has no effect */ + if (mem == NULL) /* free(0) has no effect */ return; p = mem2chunk(mem); @@ -2579,10 +2579,10 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; if (bytes == 0) { fREe(oldmem); return 0; } #endif - if ((long)bytes < 0) return 0; + if ((long)bytes < 0) return NULL; /* realloc of null is supposed to be same as malloc */ - if (oldmem == 0) return mALLOc(bytes); + if (oldmem == NULL) return mALLOc(bytes); newp = oldp = mem2chunk(oldmem); newsize = oldsize = chunksize(oldp); @@ -2643,7 +2643,7 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; } else { - next = 0; + next = NULL; nextsize = 0; } @@ -2656,7 +2656,7 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; /* try forward + backward first to save a later consolidation */ - if (next != 0) + if (next != NULL) { /* into top */ if (next == top) @@ -2689,7 +2689,7 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; } /* backward only */ - if (prev != 0 && (long)(prevsize + newsize) >= (long)nb) + if (prev != NULL && (long)(prevsize + newsize) >= (long)nb) { unlink(prev, bck, fwd); newp = prev; @@ -2704,8 +2704,8 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; newmem = mALLOc (bytes); - if (newmem == 0) /* propagate failure */ - return 0; + if (newmem == NULL) /* propagate failure */ + return NULL; /* Avoid copy if newp is next chunk after oldp. */ /* (This can only happen when new chunk is sbrk'ed.) */ @@ -2783,7 +2783,7 @@ Void_t* mEMALIGn(alignment, bytes) size_t alignment; size_t bytes; mchunkptr remainder; /* spare room at end to split off */ long remainder_size; /* its size */ - if ((long)bytes < 0) return 0; + if ((long)bytes < 0) return NULL; /* If need less alignment than we give anyway, just relay to malloc */ @@ -2798,7 +2798,7 @@ Void_t* mEMALIGn(alignment, bytes) size_t alignment; size_t bytes; nb = request2size(bytes); m = (char*)(mALLOc(nb + alignment + MINSIZE)); - if (m == 0) return 0; /* propagate failure */ + if (m == NULL) return NULL; /* propagate failure */ p = mem2chunk(m); @@ -2923,10 +2923,10 @@ Void_t* cALLOc(n, elem_size) size_t n; size_t elem_size; #endif Void_t* mem = mALLOc (sz); - if ((long)n < 0) return 0; + if ((long)n < 0) return NULL; - if (mem == 0) - return 0; + if (mem == NULL) + return NULL; else { p = mem2chunk(mem); @@ -3072,7 +3072,7 @@ size_t malloc_usable_size(mem) Void_t* mem; #endif { mchunkptr p; - if (mem == 0) + if (mem == NULL) return 0; else { diff --git a/common/env_common.c b/common/env_common.c index 61c4be54d0..3d3cb70a6d 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -37,102 +37,7 @@ DECLARE_GLOBAL_DATA_PTR; /************************************************************************ * Default settings to be used when no valid environment is found */ - -const uchar default_environment[] = { -#ifdef CONFIG_BOOTARGS - "bootargs=" CONFIG_BOOTARGS "\0" -#endif -#ifdef CONFIG_BOOTCOMMAND - "bootcmd=" CONFIG_BOOTCOMMAND "\0" -#endif -#ifdef CONFIG_RAMBOOTCOMMAND - "ramboot=" CONFIG_RAMBOOTCOMMAND "\0" -#endif -#ifdef CONFIG_NFSBOOTCOMMAND - "nfsboot=" CONFIG_NFSBOOTCOMMAND "\0" -#endif -#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) - "bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0" -#endif -#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0) - "baudrate=" __stringify(CONFIG_BAUDRATE) "\0" -#endif -#ifdef CONFIG_LOADS_ECHO - "loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0" -#endif -#ifdef CONFIG_ETHADDR - "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" -#endif -#ifdef CONFIG_ETH1ADDR - "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" -#endif -#ifdef CONFIG_ETH2ADDR - "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" -#endif -#ifdef CONFIG_ETH3ADDR - "eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0" -#endif -#ifdef CONFIG_ETH4ADDR - "eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0" -#endif -#ifdef CONFIG_ETH5ADDR - "eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0" -#endif -#ifdef CONFIG_ETHPRIME - "ethprime=" CONFIG_ETHPRIME "\0" -#endif -#ifdef CONFIG_IPADDR - "ipaddr=" __stringify(CONFIG_IPADDR) "\0" -#endif -#ifdef CONFIG_SERVERIP - "serverip=" __stringify(CONFIG_SERVERIP) "\0" -#endif -#ifdef CONFIG_SYS_AUTOLOAD - "autoload=" CONFIG_SYS_AUTOLOAD "\0" -#endif -#ifdef CONFIG_PREBOOT - "preboot=" CONFIG_PREBOOT "\0" -#endif -#ifdef CONFIG_ROOTPATH - "rootpath=" CONFIG_ROOTPATH "\0" -#endif -#ifdef CONFIG_GATEWAYIP - "gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0" -#endif -#ifdef CONFIG_NETMASK - "netmask=" __stringify(CONFIG_NETMASK) "\0" -#endif -#ifdef CONFIG_HOSTNAME - "hostname=" __stringify(CONFIG_HOSTNAME) "\0" -#endif -#ifdef CONFIG_BOOTFILE - "bootfile=" CONFIG_BOOTFILE "\0" -#endif -#ifdef CONFIG_LOADADDR - "loadaddr=" __stringify(CONFIG_LOADADDR) "\0" -#endif -#ifdef CONFIG_CLOCKS_IN_MHZ - "clocks_in_mhz=1\0" -#endif -#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0) - "pcidelay=" __stringify(CONFIG_PCI_BOOTDELAY)"\0" -#endif -#ifdef CONFIG_ENV_VARS_UBOOT_CONFIG - "arch=" CONFIG_SYS_ARCH "\0" - "cpu=" CONFIG_SYS_CPU "\0" - "board=" CONFIG_SYS_BOARD "\0" -#ifdef CONFIG_SYS_VENDOR - "vendor=" CONFIG_SYS_VENDOR "\0" -#endif -#ifdef CONFIG_SYS_SOC - "soc=" CONFIG_SYS_SOC "\0" -#endif -#endif -#ifdef CONFIG_EXTRA_ENV_SETTINGS - CONFIG_EXTRA_ENV_SETTINGS -#endif - "\0" -}; +#include <env_default.h> struct hsearch_data env_htab = { .apply = env_check_apply, diff --git a/common/env_embedded.c b/common/env_embedded.c index 8cc08ae4da..52bc6873dd 100644 --- a/common/env_embedded.c +++ b/common/env_embedded.c @@ -89,107 +89,9 @@ # define ENV_CRC (~0) #endif -env_t environment __PPCENV__ = { - ENV_CRC, /* CRC Sum */ -#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT - 1, /* Flags: valid */ -#endif - { -#if defined(CONFIG_BOOTARGS) - "bootargs=" CONFIG_BOOTARGS "\0" -#endif -#if defined(CONFIG_BOOTCOMMAND) - "bootcmd=" CONFIG_BOOTCOMMAND "\0" -#endif -#if defined(CONFIG_RAMBOOTCOMMAND) - "ramboot=" CONFIG_RAMBOOTCOMMAND "\0" -#endif -#if defined(CONFIG_NFSBOOTCOMMAND) - "nfsboot=" CONFIG_NFSBOOTCOMMAND "\0" -#endif -#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) - "bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0" -#endif -#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0) - "baudrate=" __stringify(CONFIG_BAUDRATE) "\0" -#endif -#ifdef CONFIG_LOADS_ECHO - "loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0" -#endif -#ifdef CONFIG_ETHADDR - "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" -#endif -#ifdef CONFIG_ETH1ADDR - "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" -#endif -#ifdef CONFIG_ETH2ADDR - "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" -#endif -#ifdef CONFIG_ETH3ADDR - "eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0" -#endif -#ifdef CONFIG_ETH4ADDR - "eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0" -#endif -#ifdef CONFIG_ETH5ADDR - "eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0" -#endif -#ifdef CONFIG_ETHPRIME - "ethprime=" CONFIG_ETHPRIME "\0" -#endif -#ifdef CONFIG_IPADDR - "ipaddr=" __stringify(CONFIG_IPADDR) "\0" -#endif -#ifdef CONFIG_SERVERIP - "serverip=" __stringify(CONFIG_SERVERIP) "\0" -#endif -#ifdef CONFIG_SYS_AUTOLOAD - "autoload=" CONFIG_SYS_AUTOLOAD "\0" -#endif -#ifdef CONFIG_ROOTPATH - "rootpath=" CONFIG_ROOTPATH "\0" -#endif -#ifdef CONFIG_GATEWAYIP - "gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0" -#endif -#ifdef CONFIG_NETMASK - "netmask=" __stringify(CONFIG_NETMASK) "\0" -#endif -#ifdef CONFIG_HOSTNAME - "hostname=" __stringify(CONFIG_HOSTNAME) "\0" -#endif -#ifdef CONFIG_BOOTFILE - "bootfile=" CONFIG_BOOTFILE "\0" -#endif -#ifdef CONFIG_LOADADDR - "loadaddr=" __stringify(CONFIG_LOADADDR) "\0" -#endif -#ifdef CONFIG_PREBOOT - "preboot=" CONFIG_PREBOOT "\0" -#endif -#ifdef CONFIG_CLOCKS_IN_MHZ - "clocks_in_mhz=" "1" "\0" -#endif -#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0) - "pcidelay=" __stringify(CONFIG_PCI_BOOTDELAY)"\0" -#endif -#ifdef CONFIG_ENV_VARS_UBOOT_CONFIG - "arch=" CONFIG_SYS_ARCH "\0" - "cpu=" CONFIG_SYS_CPU "\0" - "board=" CONFIG_SYS_BOARD "\0" -#ifdef CONFIG_SYS_VENDOR - "vendor=" CONFIG_SYS_VENDOR "\0" -#endif -#ifdef CONFIG_SYS_SOC - "soc=" CONFIG_SYS_SOC "\0" -#endif -#endif -#ifdef CONFIG_EXTRA_ENV_SETTINGS - CONFIG_EXTRA_ENV_SETTINGS -#endif - "\0" /* Term. env_t.data with 2 NULs */ - } -}; +#define DEFAULT_ENV_INSTANCE_EMBEDDED +#include <env_default.h> + #ifdef CONFIG_ENV_ADDR_REDUND env_t redundand_environment __PPCENV__ = { 0, /* CRC Sum: invalid */ diff --git a/common/hush.c b/common/hush.c index 4c84c2f501..eb6c879c53 100644 --- a/common/hush.c +++ b/common/hush.c @@ -289,8 +289,7 @@ struct variables { char **global_argv; unsigned int global_argc; #endif -unsigned int last_return_code; -int nesting_level; +static unsigned int last_return_code; #ifndef __U_BOOT__ extern char **environ; /* This is in <unistd.h>, but protected with __USE_GNU */ #endif @@ -2172,7 +2171,7 @@ int set_local_var(const char *s, int flg_export) * NAME=VALUE format. So the first order of business is to * split 's' on the '=' into 'name' and 'value' */ value = strchr(name, '='); - if (value==0 && ++value==0) { + if (value == NULL && ++value == NULL) { free(name); return -1; } @@ -2207,13 +2206,13 @@ int set_local_var(const char *s, int flg_export) result = -1; } else { cur->name = strdup(name); - if(cur->name == 0) { + if (cur->name == NULL) { free(cur); result = -1; } else { struct variables *bottom = top_vars; cur->value = strdup(value); - cur->next = 0; + cur->next = NULL; cur->flg_export = flg_export; cur->flg_read_only = 0; while(bottom->next) bottom=bottom->next; @@ -2246,7 +2245,7 @@ void unset_local_var(const char *name) if(strcmp(cur->name, name)==0) break; } - if(cur!=0) { + if (cur != NULL) { struct variables *next = top_vars; if(cur->flg_read_only) { error_msg("%s: readonly variable", name); @@ -2329,7 +2328,8 @@ static int setup_redirect(struct p_context *ctx, int fd, redir_type style, } #endif -struct pipe *new_pipe(void) { +static struct pipe *new_pipe(void) +{ struct pipe *pi; pi = xmalloc(sizeof(struct pipe)); pi->num_progs = 0; @@ -2387,7 +2387,7 @@ static struct reserved_combo reserved_list[] = { }; #define NRES (sizeof(reserved_list)/sizeof(struct reserved_combo)) -int reserved_word(o_string *dest, struct p_context *ctx) +static int reserved_word(o_string *dest, struct p_context *ctx) { struct reserved_combo *r; for (r=reserved_list; @@ -2924,8 +2924,8 @@ int parse_string(o_string *dest, struct p_context *ctx, const char *src) #endif /* return code is 0 for normal exit, 1 for syntax error */ -int parse_stream(o_string *dest, struct p_context *ctx, - struct in_str *input, int end_trigger) +static int parse_stream(o_string *dest, struct p_context *ctx, + struct in_str *input, int end_trigger) { unsigned int ch, m; #ifndef __U_BOOT__ @@ -3124,13 +3124,13 @@ int parse_stream(o_string *dest, struct p_context *ctx, return 0; } -void mapset(const unsigned char *set, int code) +static void mapset(const unsigned char *set, int code) { const unsigned char *s; for (s=set; *s; s++) map[*s] = code; } -void update_ifs_map(void) +static void update_ifs_map(void) { /* char *ifs and char map[256] are both globals. */ ifs = (uchar *)getenv("IFS"); @@ -3158,7 +3158,7 @@ void update_ifs_map(void) /* most recursion does not come through here, the exeception is * from builtin_source() */ -int parse_stream_outer(struct in_str *inp, int flag) +static int parse_stream_outer(struct in_str *inp, int flag) { struct p_context ctx; @@ -3292,7 +3292,7 @@ int u_boot_hush_start(void) top_vars = malloc(sizeof(struct variables)); top_vars->name = "HUSH_VERSION"; top_vars->value = "0.01"; - top_vars->next = 0; + top_vars->next = NULL; top_vars->flg_export = 0; top_vars->flg_read_only = 1; #ifdef CONFIG_NEEDS_MANUAL_RELOC @@ -3628,7 +3628,8 @@ static char * make_string(char ** inp) } #ifdef __U_BOOT__ -int do_showvar (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +static int do_showvar(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) { int i, k; int rcode = 0; diff --git a/common/image.c b/common/image.c index f084d2baed..df642e656c 100644 --- a/common/image.c +++ b/common/image.c @@ -1279,7 +1279,7 @@ void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob) int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size) { void *fdt_blob = *of_flat_tree; - void *of_start = 0; + void *of_start = NULL; char *fdt_high; ulong of_len = 0; int err; @@ -1312,7 +1312,7 @@ int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size) of_start = (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000, (ulong)desired_addr); - if (of_start == 0) { + if (of_start == NULL) { puts("Failed using fdt_high value for Device Tree"); goto error; } @@ -1327,7 +1327,7 @@ int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size) + getenv_bootm_low()); } - if (of_start == 0) { + if (of_start == NULL) { puts("device tree - allocation error\n"); goto error; } @@ -1703,7 +1703,7 @@ int boot_get_fdt(int flag, int argc, char * const argv[], return 0; error: - *of_flat_tree = 0; + *of_flat_tree = NULL; *of_size = 0; return 1; } @@ -2496,6 +2496,36 @@ int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, return 0; } +#ifndef USE_HOSTCC +/** + * fit_image_hash_get_ignore - get hash ignore flag + * @fit: pointer to the FIT format image header + * @noffset: hash node offset + * @ignore: pointer to an int, will hold hash ignore flag + * + * fit_image_hash_get_ignore() finds hash ignore property in a given hash node. + * If the property is found and non-zero, the hash algorithm is not verified by + * u-boot automatically. + * + * returns: + * 0, on ignore not found + * value, on ignore found + */ +int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore) +{ + int len; + int *value; + + value = (int *)fdt_getprop(fit, noffset, FIT_IGNORE_PROP, &len); + if (value == NULL || len != sizeof(int)) + *ignore = 0; + else + *ignore = *value; + + return 0; +} +#endif + /** * fit_set_timestamp - set node timestamp property * @fit: pointer to the FIT format image header @@ -2759,6 +2789,9 @@ int fit_image_check_hashes(const void *fit, int image_noffset) char *algo; uint8_t *fit_value; int fit_value_len; +#ifndef USE_HOSTCC + int ignore; +#endif uint8_t value[FIT_MAX_HASH_LEN]; int value_len; int noffset; @@ -2795,6 +2828,14 @@ int fit_image_check_hashes(const void *fit, int image_noffset) } printf("%s", algo); +#ifndef USE_HOSTCC + fit_image_hash_get_ignore(fit, noffset, &ignore); + if (ignore) { + printf("-skipped "); + continue; + } +#endif + if (fit_image_hash_get_value(fit, noffset, &fit_value, &fit_value_len)) { err_msg = " error!\nCan't get hash value " @@ -2820,6 +2861,11 @@ int fit_image_check_hashes(const void *fit, int image_noffset) } } + if (noffset == -FDT_ERR_TRUNCATED || noffset == -FDT_ERR_BADSTRUCTURE) { + err_msg = " error!\nCorrupted or truncated tree"; + goto error; + } + return 1; error: diff --git a/common/iomux.c b/common/iomux.c index dbc231250c..6a757041f6 100644 --- a/common/iomux.c +++ b/common/iomux.c @@ -135,16 +135,6 @@ int iomux_doenv(const int console, const char *arg) */ if (console_assign(console, start[j]) < 0) continue; - /* - * This was taken from common/cmd_nvedit.c. - * This will never work because serial_assign() returns - * 1 upon error, not -1. - * This would almost always return an error anyway because - * serial_assign() expects the name of a serial device, like - * serial_smc, but the user generally only wants to set serial. - */ - if (serial_assign(start[j]) < 0) - continue; cons_set[cs_idx++] = dev; } free(console_args); diff --git a/common/main.c b/common/main.c index 9507cec88b..592ce077d2 100644 --- a/common/main.c +++ b/common/main.c @@ -505,13 +505,13 @@ void reset_cmd_timeout(void) #define HIST_MAX 20 #define HIST_SIZE CONFIG_SYS_CBSIZE -static int hist_max = 0; -static int hist_add_idx = 0; +static int hist_max; +static int hist_add_idx; static int hist_cur = -1; -unsigned hist_num = 0; +static unsigned hist_num; -char* hist_list[HIST_MAX]; -char hist_lines[HIST_MAX][HIST_SIZE + 1]; /* Save room for NULL */ +static char *hist_list[HIST_MAX]; +static char hist_lines[HIST_MAX][HIST_SIZE + 1]; /* Save room for NULL */ #define add_idx_minus_one() ((hist_add_idx == 0) ? hist_max : hist_add_idx-1) diff --git a/common/spl/spl.c b/common/spl/spl.c index 0d829c0f12..f068abd8f8 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -113,13 +113,13 @@ void spl_parse_image_header(const struct image_header *header) } } -static void __noreturn jump_to_image_no_args(void) +__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image) { typedef void __noreturn (*image_entry_noargs_t)(u32 *); image_entry_noargs_t image_entry = - (image_entry_noargs_t) spl_image.entry_point; + (image_entry_noargs_t) spl_image->entry_point; - debug("image entry point: 0x%X\n", spl_image.entry_point); + debug("image entry point: 0x%X\n", spl_image->entry_point); /* Pass the saved boot_params from rom code */ #if defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU) image_entry = (image_entry_noargs_t)0x80100000; @@ -223,7 +223,7 @@ void board_init_r(gd_t *dummy1, ulong dummy2) default: debug("Unsupported OS image.. Jumping nevertheless..\n"); } - jump_to_image_no_args(); + jump_to_image_no_args(&spl_image); } /* diff --git a/common/update.c b/common/update.c index 5b1a064c29..94d6a82aeb 100644 --- a/common/update.c +++ b/common/update.c @@ -37,6 +37,7 @@ #include <command.h> #include <flash.h> #include <net.h> +#include <net/tftp.h> #include <malloc.h> /* env variable holding the location of the update file */ diff --git a/common/usb.c b/common/usb.c index 1c9763cb6c..50b81752eb 100644 --- a/common/usb.c +++ b/common/usb.c @@ -508,8 +508,8 @@ int usb_get_configuration_no(struct usb_device *dev, tmp = le16_to_cpu(config->wTotalLength); if (tmp > USB_BUFSIZ) { - USB_PRINTF("usb_get_configuration_no: failed to get " \ - "descriptor - too long: %d\n", tmp); + printf("usb_get_configuration_no: failed to get " \ + "descriptor - too long: %d\n", tmp); return -1; } @@ -946,7 +946,13 @@ int usb_new_device(struct usb_device *dev) le16_to_cpus(&dev->descriptor.idProduct); le16_to_cpus(&dev->descriptor.bcdDevice); /* only support for one config for now */ - usb_get_configuration_no(dev, tmpbuf, 0); + err = usb_get_configuration_no(dev, tmpbuf, 0); + if (err < 0) { + printf("usb_new_device: Cannot read configuration, " \ + "skipping device %04x:%04x\n", + dev->descriptor.idVendor, dev->descriptor.idProduct); + return -1; + } usb_parse_config(dev, tmpbuf, 0); usb_set_maxpacket(dev); /* we set the default configuration here */ diff --git a/common/usb_storage.c b/common/usb_storage.c index 950451e11f..2d92ee1bb3 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -179,9 +179,9 @@ int usb_stor_get_info(struct usb_device *dev, struct us_data *us, int usb_storage_probe(struct usb_device *dev, unsigned int ifnum, struct us_data *ss); unsigned long usb_stor_read(int device, unsigned long blknr, - unsigned long blkcnt, void *buffer); + lbaint_t blkcnt, void *buffer); unsigned long usb_stor_write(int device, unsigned long blknr, - unsigned long blkcnt, const void *buffer); + lbaint_t blkcnt, const void *buffer); struct usb_device * usb_get_dev_index(int index); void uhci_show_temp_int_td(void); @@ -192,7 +192,7 @@ block_dev_desc_t *usb_stor_get_dev(int index) } #endif -void usb_show_progress(void) +static void usb_show_progress(void) { debug("."); } @@ -437,7 +437,7 @@ static int usb_stor_BBB_reset(struct us_data *us) result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0), US_BBB_RESET, USB_TYPE_CLASS | USB_RECIP_INTERFACE, - 0, us->ifnum, 0, 0, USB_CNTL_TIMEOUT * 5); + 0, us->ifnum, NULL, 0, USB_CNTL_TIMEOUT * 5); if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) { USB_STOR_PRINTF("RESET:stall\n"); @@ -500,7 +500,7 @@ static int usb_stor_CB_reset(struct us_data *us) * Set up the command for a BBB device. Note that the actual SCSI * command is copied into cbw.CBWCDB. */ -int usb_stor_BBB_comdat(ccb *srb, struct us_data *us) +static int usb_stor_BBB_comdat(ccb *srb, struct us_data *us) { int result; int actlen; @@ -548,7 +548,7 @@ int usb_stor_BBB_comdat(ccb *srb, struct us_data *us) /* FIXME: we also need a CBI_command which sets up the completion * interrupt, and waits for it */ -int usb_stor_CB_comdat(ccb *srb, struct us_data *us) +static int usb_stor_CB_comdat(ccb *srb, struct us_data *us) { int result = 0; int dir_in, retry; @@ -617,7 +617,7 @@ int usb_stor_CB_comdat(ccb *srb, struct us_data *us) } -int usb_stor_CBI_get_status(ccb *srb, struct us_data *us) +static int usb_stor_CBI_get_status(ccb *srb, struct us_data *us) { int timeout; @@ -626,7 +626,7 @@ int usb_stor_CBI_get_status(ccb *srb, struct us_data *us) (void *) &us->ip_data, us->irqmaxp, us->irqinterval); timeout = 1000; while (timeout--) { - if ((volatile int *) us->ip_wanted == 0) + if ((volatile int *) us->ip_wanted == NULL) break; mdelay(10); } @@ -665,18 +665,18 @@ int usb_stor_CBI_get_status(ccb *srb, struct us_data *us) #define USB_TRANSPORT_NOT_READY_RETRY 10 /* clear a stall on an endpoint - special for BBB devices */ -int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt) +static int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt) { int result; /* ENDPOINT_HALT = 0, so set value to 0 */ result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0), USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, - 0, endpt, 0, 0, USB_CNTL_TIMEOUT * 5); + 0, endpt, NULL, 0, USB_CNTL_TIMEOUT * 5); return result; } -int usb_stor_BBB_transport(ccb *srb, struct us_data *us) +static int usb_stor_BBB_transport(ccb *srb, struct us_data *us) { int result, retry; int dir_in; @@ -798,7 +798,7 @@ again: return result; } -int usb_stor_CB_transport(ccb *srb, struct us_data *us) +static int usb_stor_CB_transport(ccb *srb, struct us_data *us) { int result, status; ccb *psrb; @@ -1053,9 +1053,10 @@ static void usb_bin_fixup(struct usb_device_descriptor descriptor, #endif /* CONFIG_USB_BIN_FIXUP */ unsigned long usb_stor_read(int device, unsigned long blknr, - unsigned long blkcnt, void *buffer) + lbaint_t blkcnt, void *buffer) { - unsigned long start, blks, buf_addr; + lbaint_t start, blks; + uintptr_t buf_addr; unsigned short smallblks; struct usb_device *dev; struct us_data *ss; @@ -1084,7 +1085,7 @@ unsigned long usb_stor_read(int device, unsigned long blknr, start = blknr; blks = blkcnt; - USB_STOR_PRINTF("\nusb_read: dev %d startblk %lx, blccnt %lx" + USB_STOR_PRINTF("\nusb_read: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", device, start, blks, buf_addr); do { @@ -1114,7 +1115,8 @@ retry_it: } while (blks != 0); ss->flags &= ~USB_READY; - USB_STOR_PRINTF("usb_read: end startblk %lx, blccnt %x buffer %lx\n", + USB_STOR_PRINTF("usb_read: end startblk " LBAF + ", blccnt %x buffer %lx\n", start, smallblks, buf_addr); usb_disable_asynch(0); /* asynch transfer allowed */ @@ -1124,9 +1126,10 @@ retry_it: } unsigned long usb_stor_write(int device, unsigned long blknr, - unsigned long blkcnt, const void *buffer) + lbaint_t blkcnt, const void *buffer) { - unsigned long start, blks, buf_addr; + lbaint_t start, blks; + uintptr_t buf_addr; unsigned short smallblks; struct usb_device *dev; struct us_data *ss; @@ -1156,7 +1159,7 @@ unsigned long usb_stor_write(int device, unsigned long blknr, start = blknr; blks = blkcnt; - USB_STOR_PRINTF("\nusb_write: dev %d startblk %lx, blccnt %lx" + USB_STOR_PRINTF("\nusb_write: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n", device, start, blks, buf_addr); do { @@ -1188,7 +1191,8 @@ retry_it: } while (blks != 0); ss->flags &= ~USB_READY; - USB_STOR_PRINTF("usb_write: end startblk %lx, blccnt %x buffer %lx\n", + USB_STOR_PRINTF("usb_write: end startblk " LBAF + ", blccnt %x buffer %lx\n", start, smallblks, buf_addr); usb_disable_asynch(0); /* asynch transfer allowed */ diff --git a/common/xyzModem.c b/common/xyzModem.c index a1f955b9d7..f30b0020a3 100644 --- a/common/xyzModem.c +++ b/common/xyzModem.c @@ -100,7 +100,7 @@ static struct #ifndef REDBOOT /*SB */ typedef int cyg_int32; -int +static int CYGACC_COMM_IF_GETC_TIMEOUT (char chan, char *c) { #define DELAY 20 @@ -118,7 +118,7 @@ CYGACC_COMM_IF_GETC_TIMEOUT (char chan, char *c) return 0; } -void +static void CYGACC_COMM_IF_PUTC (char x, char y) { putc (y); @@ -165,7 +165,7 @@ _tolower (char c) } /* Parse (scan) a number */ -bool +static bool parse_num (char *s, unsigned long *val, char **es, char *delim) { bool first = true; @@ -23,6 +23,8 @@ ######################################################################### +include $(TOPDIR)/helper.mk + ifeq ($(CURDIR),$(SRCTREE)) dir := else diff --git a/disk/part.c b/disk/part.c index 30229692fb..4646f682d2 100644 --- a/disk/part.c +++ b/disk/part.c @@ -35,12 +35,15 @@ #define PRINTF(fmt,args...) #endif +/* Rather than repeat this expression each time, add a define for it */ #if (defined(CONFIG_CMD_IDE) || \ defined(CONFIG_CMD_SATA) || \ defined(CONFIG_CMD_SCSI) || \ defined(CONFIG_CMD_USB) || \ defined(CONFIG_MMC) || \ defined(CONFIG_SYSTEMACE) ) +#define HAVE_BLOCK_DEVICE +#endif struct block_drvr { char *name; @@ -71,6 +74,7 @@ static const struct block_drvr block_drvr[] = { DECLARE_GLOBAL_DATA_PTR; +#ifdef HAVE_BLOCK_DEVICE block_dev_desc_t *get_dev(const char *ifname, int dev) { const struct block_drvr *drvr = block_drvr; @@ -104,12 +108,7 @@ block_dev_desc_t *get_dev(const char *ifname, int dev) } #endif -#if (defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) ) +#ifdef HAVE_BLOCK_DEVICE /* ------------------------------------------------------------------------- */ /* @@ -239,18 +238,7 @@ void dev_print (block_dev_desc_t *dev_desc) } #endif -#if (defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) ) - -#if defined(CONFIG_MAC_PARTITION) || \ - defined(CONFIG_DOS_PARTITION) || \ - defined(CONFIG_ISO_PARTITION) || \ - defined(CONFIG_AMIGA_PARTITION) || \ - defined(CONFIG_EFI_PARTITION) +#ifdef HAVE_BLOCK_DEVICE void init_part (block_dev_desc_t * dev_desc) { @@ -293,6 +281,12 @@ void init_part (block_dev_desc_t * dev_desc) } +#if defined(CONFIG_MAC_PARTITION) || \ + defined(CONFIG_DOS_PARTITION) || \ + defined(CONFIG_ISO_PARTITION) || \ + defined(CONFIG_AMIGA_PARTITION) || \ + defined(CONFIG_EFI_PARTITION) + static void print_part_header (const char *type, block_dev_desc_t * dev_desc) { puts ("\nPartition Map for "); @@ -326,6 +320,8 @@ static void print_part_header (const char *type, block_dev_desc_t * dev_desc) dev_desc->dev, type); } +#endif /* any CONFIG_..._PARTITION */ + void print_part (block_dev_desc_t * dev_desc) { @@ -372,24 +368,12 @@ void print_part (block_dev_desc_t * dev_desc) puts ("## Unknown partition table\n"); } - -#else /* neither MAC nor DOS nor ISO nor AMIGA nor EFI partition configured */ -# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION -# error nor CONFIG_ISO_PARTITION nor CONFIG_AMIGA_PARTITION -# error nor CONFIG_EFI_PARTITION configured! -#endif - -#endif +#endif /* HAVE_BLOCK_DEVICE */ int get_partition_info(block_dev_desc_t *dev_desc, int part , disk_partition_t *info) { -#if defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) +#ifdef HAVE_BLOCK_DEVICE #ifdef CONFIG_PARTITION_UUIDS /* The common case is no UUID support */ @@ -444,7 +428,7 @@ int get_partition_info(block_dev_desc_t *dev_desc, int part default: break; } -#endif +#endif /* HAVE_BLOCK_DEVICE */ return -1; } @@ -561,6 +545,8 @@ int get_device_and_partition(const char *ifname, const char *dev_part_str, info->size = (*dev_desc)->lba; info->blksz = (*dev_desc)->blksz; info->bootable = 0; + strcpy((char *)info->type, BOOT_PART_TYPE); + strcpy((char *)info->name, "Whole Disk"); #ifdef CONFIG_PARTITION_UUIDS info->uuid[0] = 0; #endif @@ -624,9 +610,9 @@ int get_device_and_partition(const char *ifname, const char *dev_part_str, */ if (p == MAX_SEARCH_PARTITIONS + 1) *info = tmpinfo; - ret = 0; } else { printf("** No valid partitions found **\n"); + ret = -1; goto cleanup; } } diff --git a/disk/part_dos.c b/disk/part_dos.c index 5c454e65ab..3fe901ba1b 100644 --- a/disk/part_dos.c +++ b/disk/part_dos.c @@ -65,13 +65,14 @@ static inline int is_bootable(dos_partition_t *p) return p->boot_ind == 0x80; } -static void print_one_part (dos_partition_t *p, int ext_part_sector, int part_num) +static void print_one_part(dos_partition_t *p, int ext_part_sector, + int part_num, unsigned int disksig) { int lba_start = ext_part_sector + le32_to_int (p->start4); int lba_size = le32_to_int (p->size4); - printf("%5d\t\t%10d\t%10d\t%2x%s%s\n", - part_num, lba_start, lba_size, p->sys_ind, + printf("%3d\t%-10d\t%-10d\t%08x-%02x\t%02x%s%s\n", + part_num, lba_start, lba_size, disksig, part_num, p->sys_ind, (is_extended(p->sys_ind) ? " Extd" : ""), (is_bootable(p) ? " Boot" : "")); } @@ -105,8 +106,9 @@ int test_part_dos (block_dev_desc_t *dev_desc) /* Print a partition that is relative to its Extended partition table */ -static void print_partition_extended (block_dev_desc_t *dev_desc, int ext_part_sector, int relative, - int part_num) +static void print_partition_extended(block_dev_desc_t *dev_desc, + int ext_part_sector, int relative, + int part_num, unsigned int disksig) { ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, dev_desc->blksz); dos_partition_t *pt; @@ -125,6 +127,9 @@ static void print_partition_extended (block_dev_desc_t *dev_desc, int ext_part_s return; } + if (!ext_part_sector) + disksig = le32_to_int(&buffer[DOS_PART_DISKSIG_OFFSET]); + /* Print all primary/logical partitions */ pt = (dos_partition_t *) (buffer + DOS_PART_TBL_OFFSET); for (i = 0; i < 4; i++, pt++) { @@ -135,7 +140,7 @@ static void print_partition_extended (block_dev_desc_t *dev_desc, int ext_part_s if ((pt->sys_ind != 0) && (ext_part_sector == 0 || !is_extended (pt->sys_ind)) ) { - print_one_part (pt, ext_part_sector, part_num); + print_one_part(pt, ext_part_sector, part_num, disksig); } /* Reverse engr the fdisk part# assignment rule! */ @@ -151,10 +156,9 @@ static void print_partition_extended (block_dev_desc_t *dev_desc, int ext_part_s if (is_extended (pt->sys_ind)) { int lba_start = le32_to_int (pt->start4) + relative; - print_partition_extended (dev_desc, lba_start, - ext_part_sector == 0 ? lba_start - : relative, - part_num); + print_partition_extended(dev_desc, lba_start, + ext_part_sector == 0 ? lba_start : relative, + part_num, disksig); } } @@ -261,8 +265,8 @@ static int get_partition_info_extended (block_dev_desc_t *dev_desc, int ext_part void print_part_dos (block_dev_desc_t *dev_desc) { - printf ("Partition Start Sector Num Sectors Type\n"); - print_partition_extended (dev_desc, 0, 0, 1); + printf("Part\tStart Sector\tNum Sectors\tUUID\t\tType\n"); + print_partition_extended(dev_desc, 0, 0, 1, 0); } int get_partition_info_dos (block_dev_desc_t *dev_desc, int part, disk_partition_t * info) diff --git a/disk/part_efi.c b/disk/part_efi.c index 264ea9c77f..a3873cebb3 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -113,6 +113,35 @@ static char *print_efiname(gpt_entry *pte) return name; } +static void uuid_string(unsigned char *uuid, char *str) +{ + static const u8 le[16] = {3, 2, 1, 0, 5, 4, 7, 6, 8, 9, 10, 11, + 12, 13, 14, 15}; + int i; + + for (i = 0; i < 16; i++) { + sprintf(str, "%02x", uuid[le[i]]); + str += 2; + switch (i) { + case 3: + case 5: + case 7: + case 9: + *str++ = '-'; + break; + } + } +} + +static efi_guid_t system_guid = PARTITION_SYSTEM_GUID; + +static inline int is_bootable(gpt_entry *p) +{ + return p->attributes.fields.legacy_bios_bootable || + !memcmp(&(p->partition_type_guid), &system_guid, + sizeof(efi_guid_t)); +} + /* * Public Functions (include/part.h) */ @@ -122,6 +151,7 @@ void print_part_efi(block_dev_desc_t * dev_desc) ALLOC_CACHE_ALIGN_BUFFER(gpt_header, gpt_head, 1); gpt_entry *gpt_pte = NULL; int i = 0; + char uuid[37]; if (!dev_desc) { printf("%s: Invalid Argument(s)\n", __func__); @@ -136,17 +166,25 @@ void print_part_efi(block_dev_desc_t * dev_desc) debug("%s: gpt-entry at %p\n", __func__, gpt_pte); - printf("Part\tName\t\t\tStart LBA\tEnd LBA\n"); + printf("Part\tStart LBA\tEnd LBA\t\tName\n"); + printf("\tAttributes\n"); + printf("\tType UUID\n"); + printf("\tPartition UUID\n"); + for (i = 0; i < le32_to_int(gpt_head->num_partition_entries); i++) { + /* Stop at the first non valid PTE */ + if (!is_pte_valid(&gpt_pte[i])) + break; - if (is_pte_valid(&gpt_pte[i])) { - printf("%3d\t%-18s\t0x%08llX\t0x%08llX\n", (i + 1), - print_efiname(&gpt_pte[i]), - le64_to_int(gpt_pte[i].starting_lba), - le64_to_int(gpt_pte[i].ending_lba)); - } else { - break; /* Stop at the first non valid PTE */ - } + printf("%3d\t0x%08llx\t0x%08llx\t\"%s\"\n", (i + 1), + le64_to_int(gpt_pte[i].starting_lba), + le64_to_int(gpt_pte[i].ending_lba), + print_efiname(&gpt_pte[i])); + printf("\tattrs:\t0x%016llx\n", gpt_pte[i].attributes.raw); + uuid_string(gpt_pte[i].partition_type_guid.b, uuid); + printf("\ttype:\t%s\n", uuid); + uuid_string(gpt_pte[i].unique_partition_guid.b, uuid); + printf("\tuuid:\t%s\n", uuid); } /* Remember to free pte */ @@ -154,28 +192,6 @@ void print_part_efi(block_dev_desc_t * dev_desc) return; } -#ifdef CONFIG_PARTITION_UUIDS -static void uuid_string(unsigned char *uuid, char *str) -{ - static const u8 le[16] = {3, 2, 1, 0, 5, 4, 7, 6, 8, 9, 10, 11, - 12, 13, 14, 15}; - int i; - - for (i = 0; i < 16; i++) { - sprintf(str, "%02x", uuid[le[i]]); - str += 2; - switch (i) { - case 3: - case 5: - case 7: - case 9: - *str++ = '-'; - break; - } - } -} -#endif - int get_partition_info_efi(block_dev_desc_t * dev_desc, int part, disk_partition_t * info) { @@ -212,6 +228,7 @@ int get_partition_info_efi(block_dev_desc_t * dev_desc, int part, sprintf((char *)info->name, "%s", print_efiname(&gpt_pte[part - 1])); sprintf((char *)info->type, "U-Boot"); + info->bootable = is_bootable(&gpt_pte[part - 1]); #ifdef CONFIG_PARTITION_UUIDS uuid_string(gpt_pte[part - 1].unique_partition_guid.b, info->uuid); #endif @@ -405,7 +422,7 @@ static gpt_entry *alloc_read_gpt_entries(block_dev_desc_t * dev_desc, count = le32_to_int(pgpt_head->num_partition_entries) * le32_to_int(pgpt_head->sizeof_partition_entry); - debug("%s: count = %lu * %lu = %u\n", __func__, + debug("%s: count = %lu * %lu = %zu\n", __func__, le32_to_int(pgpt_head->num_partition_entries), le32_to_int(pgpt_head->sizeof_partition_entry), count); @@ -415,7 +432,8 @@ static gpt_entry *alloc_read_gpt_entries(block_dev_desc_t * dev_desc, } if (count == 0 || pte == NULL) { - printf("%s: ERROR: Can't allocate 0x%X bytes for GPT Entries\n", + printf("%s: ERROR: Can't allocate 0x%zX " + "bytes for GPT Entries\n", __func__, count); return NULL; } @@ -457,7 +475,7 @@ static int is_pte_valid(gpt_entry * pte) sizeof(unused_guid.b)) == 0) { debug("%s: Found an unused PTE GUID at 0x%08X\n", __func__, - (unsigned int)pte); + (unsigned int)(uintptr_t)pte); return 0; } else { diff --git a/disk/part_efi.h b/disk/part_efi.h index 5903e7c812..4e28d1dcb6 100644 --- a/disk/part_efi.h +++ b/disk/part_efi.h @@ -111,10 +111,15 @@ typedef struct _gpt_header { unsigned char reserved2[GPT_BLOCK_SIZE - 92]; } __attribute__ ((packed)) gpt_header; -typedef struct _gpt_entry_attributes { - unsigned long long required_to_function:1; - unsigned long long reserved:47; - unsigned long long type_guid_specific:16; +typedef union _gpt_entry_attributes { + struct { + unsigned long long required_to_function:1; + unsigned long long no_block_io_protocol:1; + unsigned long long legacy_bios_bootable:1; + unsigned long long reserved:45; + unsigned long long type_guid_specific:16; + } fields; + unsigned long long raw; } __attribute__ ((packed)) gpt_entry_attributes; #define PARTNAME_SZ (72 / sizeof(efi_char16_t)) diff --git a/doc/DocBook/Makefile b/doc/DocBook/Makefile index 2f2ddfc865..da88b32419 100644 --- a/doc/DocBook/Makefile +++ b/doc/DocBook/Makefile @@ -8,7 +8,7 @@ include $(TOPDIR)/config.mk -DOCBOOKS := +DOCBOOKS := linker_lists.xml stdio.xml ### # The build process is as follows (targets): diff --git a/doc/DocBook/linker_lists.tmpl b/doc/DocBook/linker_lists.tmpl new file mode 100644 index 0000000000..f1975165d6 --- /dev/null +++ b/doc/DocBook/linker_lists.tmpl @@ -0,0 +1,46 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" + "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> + +<book id="UBootLGArrays"> + <bookinfo> + <title>The U-Boot Linker-Generated Arrays</title> + + <legalnotice> + <para> + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later + version. + </para> + + <para> + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + </para> + + <para> + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + </para> + + <para> + For more details see the file COPYING in the source + distribution of U-Boot Bootloader. + </para> + </legalnotice> + </bookinfo> + +<toc></toc> + + <chapter id="adt"> + <title>Linker-Generated Arrays</title> +!Iinclude/linker_lists.h + </chapter> + +</book> diff --git a/doc/DocBook/stdio.tmpl b/doc/DocBook/stdio.tmpl new file mode 100644 index 0000000000..4783abb0a0 --- /dev/null +++ b/doc/DocBook/stdio.tmpl @@ -0,0 +1,46 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" + "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> + +<book id="UBootSTDIO"> + <bookinfo> + <title>The U-Boot STDIO subsystem</title> + + <legalnotice> + <para> + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later + version. + </para> + + <para> + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + </para> + + <para> + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + </para> + + <para> + For more details see the file COPYING in the source + distribution of U-Boot Bootloader. + </para> + </legalnotice> + </bookinfo> + +<toc></toc> + + <chapter id="adt"> + <title>U-Boot Serial subsystem</title> +!Idrivers/serial/serial.c + </chapter> + +</book> diff --git a/doc/README.VSC3316-3308 b/doc/README.VSC3316-3308 new file mode 100644 index 0000000000..925663ba50 --- /dev/null +++ b/doc/README.VSC3316-3308 @@ -0,0 +1,43 @@ +This file contains API information of the initialization code written for +Vitesse cross-point devices, VSC3316 and VSC3308 for board B4860QDS + +Author: Shaveta Leekha <shaveta@freescale.com> + +About Device: +============= +VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch capable of data rates upto 11.5Gbps. + +VSC3316 has 16 input and 16 output ports whereas VSC3308 has 8 input and 8 output ports. Programming of these devices are performed by two-wire or four-wire serial interface. + +Initialization: +=============== +On reset, VSC devices are in low-power state with all inputs, outputs and connections in an off state. +First thing required is to program it to interface with either two-wire or four-wire interface. +In our case the interface is two-wire I2C serial interface. So the value in Interface mode register at address 79.h to be written is 0x02 for two-wire interface. Also for crosspoint connections to be activated, 01.h value need to be written in 75.h (core configuration register). + +API Overview: +============= + + vsc_if_enable(u8 vsc_addr): + -------------------------- + This API programs VSC to interface with either two-wire or four-wire interface. In our case the interface is two-wire I2C serial interface. So the value in Interface mode register at address 79.h to be written is 0x02 for two-wire interface. + Parameters: + vsc_addr - Address of the VSC device on board. + + + vsc3316_config(u8 vsc_addr, int con_arr[][2], u8 num_con): + --------------------------------------------------------- + This API configures the VSC3316 device for required connections. Connection through the VSC device requires the inputs and outputs to be properly configured. + Connection registers are on page 00. It Configures the selected input and output correctly and join them to make a connection. It also program Input state register, Global input ISE, Global input LOS, Global core control, Output mode register and core control registers etc. + vsc3308_config(u8 vsc_addr, int con_arr[][2], u8 num_con) does the essential configurations for VSC3308. + + Parameters: + vsc_addr - Address of the VSC device on board. + con_arr - connection array + num_con - number of connections to be configured + + vsc_wp_config(u8 vsc_addr): + -------------------------- + For crosspoint connections to be activated, 01.h value need to be written in 75.h (core configuration register), which is done by this API. + Parameters: + vsc_addr - Address of the VSC device on board. diff --git a/doc/README.commands b/doc/README.commands index 125f077c08..923418b1a4 100644 --- a/doc/README.commands +++ b/doc/README.commands @@ -15,12 +15,12 @@ help: Long description. This is a string **** Behind the scene ****** -The structure created is named with a special prefix (__u_boot_cmd_) +The structure created is named with a special prefix (__u_boot_list_cmd_) and placed by the linker in a special section. This makes it possible for the final link to extract all commands compiled into any object code and construct a static array so the -command can be found in an array starting at __u_boot_cmd_start. +command can be found in an array starting at _u_boot_list_cmd__start. To ensure that the linker does not discard these symbols when linking full U-Boot we generate a list of all the commands we have built (based @@ -33,6 +33,6 @@ If a new board is defined do not forget to define the command section by writing in u-boot.lds ($(TOPDIR)/board/boardname/u-boot.lds) these 3 lines: - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + .u_boot_list : { + #include "u-boot.lst"; + } diff --git a/doc/README.ext4 b/doc/README.ext4 index b3ea8b776d..b7d0ad3930 100644 --- a/doc/README.ext4 +++ b/doc/README.ext4 @@ -1,15 +1,28 @@ This patch series adds support for ext4 ls,load and write features in uboot Journaling is supported for write feature. +To enable support for the ext4 (and ext2) filesystem implementation, +#define CONFIG_FS_EXT4 + +If you want write support, +#define CONFIG_EXT4_WRITE + To Enable ext2 ls and load commands, modify the board specific config file with #define CONFIG_CMD_EXT2 +This automatically defines CONFIG_FS_EXT4 for you. To Enable ext4 ls and load commands, modify the board specific config file with #define CONFIG_CMD_EXT4 +This automatically defines CONFIG_FS_EXT4 for you. To enable ext4 write command, modify the board specific config file with #define CONFIG_CMD_EXT4 #define CONFIG_CMD_EXT4_WRITE +These automatically define CONFIG_FS_EXT4 and CONFIG_EXT4_WRITE for you. + +Also relevant are the generic filesystem commands, +#define CONFIG_CMD_FS_GENERIC +This does not automatically enable EXT4 support for you. Steps to test: diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr index f94b56f628..3992640ba3 100644 --- a/doc/README.fsl-ddr +++ b/doc/README.fsl-ddr @@ -103,6 +103,11 @@ The ways to configure the ddr interleaving mode # bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1) setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_cs2_cs3" + # bank(chip-select) interleaving (auto) + setenv hwconfig "fsl_ddr:bank_intlv=auto" + This auto mode only select from cs0_cs1_cs2_cs3, cs0_cs1, null dependings + on DIMMs. + Memory controller address hashing ================================== If the DDR controller supports address hashing, it can be enabled by hwconfig. diff --git a/doc/README.m54418twr b/doc/README.m54418twr new file mode 100644 index 0000000000..f69ae01912 --- /dev/null +++ b/doc/README.m54418twr @@ -0,0 +1,244 @@ +Freescale MCF54418TWR ColdFire Development Board +================================================ + +TsiChung Liew(Tsi-Chung.Liew@freescale.com) +Created Mar 22, 2012 +=========================================== + + +Changed files: +============== + +- board/freescale/m54418twr/m54418twr.c Dram setup +- board/freescale/m54418twr/Makefile Makefile +- board/freescale/m54418twr/config.mk config make +- board/freescale/m54418twr/u-boot.lds Linker description + +- arch/m68k/cpu/mcf5445x/cpu.c cpu specific code +- arch/m68k/cpu/mcf5445x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs +- arch/m68k/cpu/mcf5445x/interrupts.c cpu specific interrupt support +- arch/m68k/cpu/mcf5445x/speed.c system, pci, flexbus, and cpu clock +- arch/m68k/cpu/mcf5445x/Makefile Makefile +- arch/m68k/cpu/mcf5445x/config.mk config make +- arch/m68k/cpu/mcf5445x/start.S start up assembly code + +- doc/README.m54418twr This readme file + +- drivers/net/mcffec.c ColdFire common FEC driver +- drivers/net/mcfmii.c ColdFire common MII driver +- drivers/serial/mcfuart.c ColdFire common UART driver + +- arch/m68k/include/asm/bitops.h Bit operation function export +- arch/m68k/include/asm/byteorder.h Byte order functions +- arch/m68k/include/asm/fec.h FEC structure and definition +- arch/m68k/include/asm/global_data.h Global data structure +- arch/m68k/include/asm/immap.h ColdFire specific header file and driver macros +- arch/m68k/include/asm/immap_5441x.h mcf5441x specific header file +- arch/m68k/include/asm/io.h io functions +- arch/m68k/include/asm/m5441x.h mcf5441x specific header file +- arch/m68k/include/asm/posix_types.h Posix +- arch/m68k/include/asm/processor.h header file +- arch/m68k/include/asm/ptrace.h Exception structure +- arch/m68k/include/asm/rtc.h Realtime clock header file +- arch/m68k/include/asm/string.h String function export +- arch/m68k/include/asm/timer.h Timer structure and definition +- arch/m68k/include/asm/types.h Data types definition +- arch/m68k/include/asm/uart.h Uart structure and definition +- arch/m68k/include/asm/u-boot.h u-boot structure + +- include/configs/M54418TWR.h Board specific configuration file + +- arch/m68k/lib/board.c board init function +- arch/m68k/lib/cache.c +- arch/m68k/lib/interrupts.c Coldfire common interrupt functions +- arch/m68k/lib/time.c Timer functions (Dma timer and PIT) +- arch/m68k/lib/traps.c Exception init code + +1 MCF5441x specific Options/Settings +==================================== +1.1 pre-loader is no longer suppoer in thie coldfire family + +1.2 Configuration settings for M54418TWR Development Board +CONFIG_MCF5441x -- define for all MCF5441x CPUs +CONFIG_M54418 -- define for all Freescale MCF54418 CPUs +CONFIG_M54418TWR -- define for M54418TWR board + +CONFIG_MCFUART -- define to use common CF Uart driver +CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 +CONFIG_BAUDRATE -- define UART baudrate + +CONFIG_MCFFEC -- define to use common CF FEC driver +CONFIG_MII -- enable to use MII driver +CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery +CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer +CONFIG_SYS_FAULT_ECHO_LINK_DOWN -- +CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration +CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration +CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register +CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register +MCFFEC_TOUT_LOOP -- set FEC timeout loop +CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot + +CONFIG_MCFTMR -- define to use DMA timer + +CONFIG_SYS_IMMR -- define for MBAR offset + +CONFIG_EXTRA_CLOCK -- Enable extra clock such as vco, flexbus, pci, etc + +CONFIG_SYS_MBAR -- define MBAR offset + +CONFIG_MONITOR_IS_IN_RAM -- Not support + +CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF54455 internal SRAM + +CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register +CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register +CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register + +CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base + +2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL +=========================================== +2.1. System memory map: + MRAM: 0x00000000-0x0003FFFF (256KB) + DDR: 0x40000000-0x47FFFFFF (128MB) + SRAM: 0x80000000-0x8000FFFF (64KB) + IP: 0xE0000000-0xFFFFFFFF (512MB) + +3. COMPILATION +============== +3.1 To create U-Boot the gcc-4.x compiler set (ColdFire ELF version) +from codesourcery.com was used. Download it from: +http://www.codesourcery.com/gnu_toolchains/coldfire/download.html + +3.2 Compilation + export CROSS_COMPILE=cross-compile-prefix + cd u-boot + make distclean + make M54418TWR_config, or - default to spi serial flash boot, 50Mhz input clock + make M54418TWR_nand_mii_config, or - default to nand flash boot, mii mode, 25Mhz input clock + make M54418TWR_nand_rmii_config, or - default to nand flash boot, rmii mode, 50Mhz input clock + make M54418TWR_nand_rmii_lowfreq_config, or - default to nand flash boot, rmii mode, 50Mhz input clock + make M54418TWR_serial_mii_config, or - default to spi serial flash boot, 25Mhz input clock + make M54418TWR_serial_rmii_config, or - default to spi serial flash boot, 50Mhz input clock + make + +4. SCREEN DUMP +============== +4.1 M54418TWR Development board + Boot from NAND flash (NOTE: May not show exactly the same) + +U-Boot 2012.10-00209-g12ae1d8-dirty (Oct 18 2012 - 15:54:54) + +CPU: Freescale MCF54418 (Mask:a3 Version:1) + CPU CLK 250 MHz BUS CLK 125 MHz FLB CLK 125 MHz + INP CLK 50 MHz VCO CLK 500 MHz +Board: Freescale MCF54418 Tower System +SPI: ready +DRAM: 128 MiB +NAND: 256 MiB +In: serial +Out: serial +Err: serial +Net: FEC0, FEC1 +-> pri +baudrate=115200 +bootargs=root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(k +ernel)ro,-(jffs2) console=ttyS0,115200 +bootdelay=2 +eth1addr=00:e0:0c:bc:e5:61 +ethact=FEC0 +ethaddr=00:e0:0c:bc:e5:60 +fileaddr=40010000 +filesize=27354 +gatewayip=192.168.1.1 +hostname=M54418TWR +inpclk=50000000 +ipaddr=192.168.1.2 +load=tftp ${loadaddr} ${u-boot}; +loadaddr=0x40010000 +mem=129024k +netdev=eth0 +netmask=255.255.255.0 +prog=nand device 0;nand erase 0 40000;nb_update ${loadaddr} ${filesize};save +serverip=192.168.1.1 +stderr=serial +stdin=serial +stdout=serial +u-boot=u-boot.bin +upd=run load; run prog + +Environment size: 653/131068 bytes +-> bdinfo +memstart = 0x40000000 +memsize = 0x08000000 +flashstart = 0x00000000 +flashsize = 0x00000000 +flashoffset = 0x00000000 +sramstart = 0x80000000 +sramsize = 0x00010000 +mbar = 0xFC000000 +cpufreq = 250 MHz +busfreq = 125 MHz +flbfreq = 125 MHz +inpfreq = 50 MHz +vcofreq = 500 MHz +ethaddr = 00:e0:0c:bc:e5:60 +eth1addr = 00:e0:0c:bc:e5:61 +ip_addr = 192.168.1.2 +baudrate = 115200 bps +-> help +? - alias for 'help' +base - print or set address offset +bdinfo - print Board Info structure +boot - boot default, i.e., run 'bootcmd' +bootd - boot default, i.e., run 'bootcmd' +bootelf - Boot from an ELF image in memory +bootm - boot application image from memory +bootp - boot image via network using BOOTP/TFTP protocol +bootvx - Boot vxWorks from an ELF image +cmp - memory compare +coninfo - print console devices and information +cp - memory copy +crc32 - checksum calculation +dcache - enable or disable data cache +dhcp - boot image via network using DHCP/TFTP protocol +echo - echo args to console +editenv - edit environment variable +env - environment handling commands +exit - exit script +false - do nothing, unsuccessfully +go - start application at address 'addr' +help - print command description/usage +icache - enable or disable instruction cache +iminfo - print header information for application image +imxtract- extract a part of a multi-image +itest - return true/false on integer compare +loop - infinite loop on address range +md - memory display +mdio - MDIO utility commands +mii - MII utility commands +mm - memory modify (auto-incrementing address) +mtest - simple RAM read/write test +mw - memory write (fill) +nand - NAND sub-system +nb_update- Nand boot update program +nboot - boot from NAND device +nfs - boot image via network using NFS protocol +nm - memory modify (constant address) +ping - send ICMP ECHO_REQUEST to network host +printenv- print environment variables +reginfo - print register information +reset - Perform RESET of the CPU +run - run commands in an environment variable +saveenv - save environment variables to persistent storage +setenv - set environment variables +sf - SPI flash sub-system +showvar - print local hushshell variables +sleep - delay execution for some time +source - run script from memory +sspi - SPI utility command +test - minimal test like /bin/sh +tftpboot- boot image via network using TFTP protocol +true - do nothing, successfully +version - print monitor, compiler and linker version diff --git a/doc/README.mpc85xx-spin-table b/doc/README.mpc85xx-spin-table new file mode 100644 index 0000000000..8da768a2a6 --- /dev/null +++ b/doc/README.mpc85xx-spin-table @@ -0,0 +1,26 @@ +Spin table in cache +===================================== +As specified by ePAPR v1.1, the spin table needs to be in cached memory. After +DDR is initialized and U-boot relocates itself into DDR, the spin table is +accessible for core 0. It is part of release.S, within 4KB range after +__secondary_start_page. For other cores to use the spin table, the booting +process is described below: + +Core 0 sets up the reset page on the top 4K of memory (or 4GB if total memory +is more than 4GB), and creates a TLB to map it to 0xffff_f000, regardless of +the physical address of this page, with WIMGE=0b01010. Core 0 also enables boot +page translation for secondary cores to use this page of memory. Then 4KB +memory is copied from __secondary_start_page to the boot page, after flusing +cache because this page is mapped as normal DDR. Before copying the reset page, +core 0 puts the physical address of the spin table (which is in release.S and +relocated to the top of mapped memory) into a variable __spin_table_addr so +that secondary cores can see it. + +When secondary cores boot up from 0xffff_f000 page, they only have one default +TLB. While booting, they set up another TLB in AS=1 space and jump into +the new space. The new TLB covers the physical address of the spin table page, +with WIMGE =0b00100. Now secondary cores can keep polling the spin table +without stress DDR bus because both the code and the spin table is in cache. + +For the above to work, DDR has to set the 'M' bit of WIMGE, in order to keep +cache coherence. diff --git a/doc/README.nokia_rx51 b/doc/README.nokia_rx51 new file mode 100644 index 0000000000..a8fdfcd372 --- /dev/null +++ b/doc/README.nokia_rx51 @@ -0,0 +1,104 @@ +Board: Nokia RX-51 aka N900 + +This board definition results in a u-boot.bin which can be chainloaded +from NOLO in qemu or on a real N900. It does very little hardware config +because NOLO has already configured the board. Only needed is enabling +internal eMMC memory via twl4030 regulator which is not enabled by NOLO. + +NOLO is expecting a kernel image and will treat any image it finds in +onenand as such. This u-boot is intended to be flashed to the N900 like +a kernel. In order to transparently boot the original kernel, it will be +appended to u-boot.bin at 0x40000. NOLO will load the entire image into +(random) memory and execute u-boot, which saves hw revision, boot reason +and boot mode ATAGs set by NOLO. Then the bootscripts will attempt to load +uImage or boot.scr from a fat, ext2/ext3 or ext4 filesystem in external +SD card or internal eMMC memory. If this fails or keyboard is closed then +the appended kernel image will be booted using some generated and some +stored ATAGs (see boot order). + +There is support for hardware watchdog. Hardware watchdog is started by +NOLO so u-boot must kick watchdog to prevent reboot device (but not very +often, max every 2 seconds). There is also support for framebuffer display +output with ANSI espace codes and the N900 HW keyboard input. USB tty works +but is disabled because it prevents the current Maemo kernel from booting. + +When U-Boot is starting it enable IBE bit in Auxiliary Control Register, +which is needed for Thumb-2 ISA support. It is workaround for errata 430973. + +Default boot order: + + * 0. if keyboard is closed boot automatically attached kernel image + * 1. try boot from external SD card + * 2. try boot from internal eMMC memory + * 3. try boot from attached kernel image + +Boot from SD or eMMC in this order: + + * 1. + * 1.1 find boot.scr on first fat partition + * 1.2 find uImage on first fat parition + * 1.3 same order for 2. - 4. fat partition + * 2. same as 1. but for ext2/3 partition + * 3. same as 1. but for ext4 partition + + +Available additional commands/variables: + + * run sercon - Use serial port for control + * run usbcon - Use usbtty for control + * run vgacon - Use framebuffer and HW keyboard for control (default) + + * run sdboot - Boot from external SD card (see boot order) + * run emmcboot - Boot from internal eMMC memory (see boot order) + * run attachboot - Boot attached kernel image (attached to U-Boot binary) + + * run scriptload - Load boot script ${mmcscriptfile} + * run scriptboot - Run loaded boot script + * run kernload - Load kernel image ${mmckernfile} + * run initrdload - Load initrd image ${mmcinitrdfile} + * run kernboot - Boot loaded kernel image + * run kerninitrdboot - Boot loaded kernel image with loaded initrd image + + * run trymmcscriptboot - Try to load and boot script ${mmcscriptfile} + * run trymmckernboot - Try to load and boot kernel image ${mmckernfile} + * run trymmckerninitrdboot - Try to load and boot kernel image ${mmckernfile} + with initrd image ${mmcinitrdfile} + +Additional variables for loading files from mmc: + + * mmc ${mmcnum} (0 - external, 1 - internal) + * partition number ${mmcpart} (1 - 4) + * parition type ${mmctype} (fat, ext2) + +Additional varuables for booting kernel: + + * setup_omap_atag - Add OMAP table into atags structure (needs maemo kernel) + * setup_console_atag - Enable serial console in OMAP table + * setup_boot_reason_atag - Change boot reason in OMAP table + * setup_boot_mode_atag - Change boot mode in OMAP table + +USB TTY: + + Maemo kernel 2.6.28 will crash if u-boot enable usb tty. So USB TTY is disabled. + For enabling USB TTY just add this line to file include/configs/nokia_rx51.h + + #define CONFIG_USB_TTY + + +ONENAND support: + + ONENAND support is disabled because not working yet and cause linux kernel to + crash or no access to mtd. For enabling ONENAND support add this line at begin + of file include/configs/nokia_rx51.h + + #define ONENAND_SUPPORT + + +UBIFS support: + + UBIFS support is disabled, because U-Boot image is too big and cannot be + flashed with attached zImage to RX-51 kernel nand area. For enabling UBIFS + support first enable ONENAND support and then add this line at begin of file + include/configs/nokia_rx51.h + + #define UBIFS_SUPPORT diff --git a/doc/README.scrapyard b/doc/README.scrapyard index d0f47164d7..2b868e6515 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,7 +11,14 @@ easily if here is something they might want to dig for... Board Arch CPU removed Commit last known maintainer/contact ============================================================================= -TQM85xx powerpc MPC85xx - - Stefan Roese <sr@denx.de> +AMX860 powerpc mpc860 - - Wolfgang Denk <wd@denx.de> +c2mon powerpc mpc855 - - Wolfgang Denk <wd@denx.de> +ETX094 powerpc mpc850 - - Wolfgang Denk <wd@denx.de> +IAD210 powerpc mpc860 - - - +LANTEC powerpc mpc850 - - Wolfgang Denk <wd@denx.de> +SCM powerpc mpc8260 - - Wolfgang Grandegger <wg@denx.de> +SX1 arm arm925t - - +TQM85xx powerpc MPC85xx d923a5d5 2012-10-04 Stefan Roese <sr@denx.de> apollon arm omap24xx 535c74f 2012-09-18 Kyungmin Park <kyungmin.park@samsung.com> tb0229 mips mips32 3f3110d 2011-12-12 rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de> diff --git a/doc/README.t4240qds b/doc/README.t4240qds new file mode 100644 index 0000000000..677d120a80 --- /dev/null +++ b/doc/README.t4240qds @@ -0,0 +1,98 @@ +Overview +-------- +The T4240QDS is a high-performance computing evaluation, development and test +platform supporting the T4240 QorIQ™ Power Architecture™ processor. T4240QDS is +optimized to support the high-bandwidth DDR3 memory ports, as well as the +highly-configurable SerDes ports. The system is lead-free and RoHS-compliant. + +Board Features + SERDES Connections + 32 lanes grouped into four 8-lane banks + Two “front side” banks dedicated to Ethernet + - High-speed crosspoint switch fabric on selected lanes + - Two PCI Express slots with side-band connector supporting + - SGMII + - XAUI + - HiGig + - I-pass connectors allow board-to-board and loopback support + Two “back side” banks dedicated to other protocols + - High-speed crosspoint switch fabric on all lanes + - Four PCI Express slots with side-band connector supporting + - PCI Express 3.0 + - SATA 2.0 + - SRIO 2.0 + - Supports 4X Aurora debug with two connectors + DDR Controllers + Three independant 64-bit DDR3 controllers + Supports rates of 1866 up to 2133 MHz data-rate + Supports two DDR3/DDR3LP UDIMM/RDIMMs per controller + DDR power supplies 1.5V to all devices with automatic tracking of VTT. + Power software-switchable to 1.35V if software detects all DDR3LP devices. + MT9JSF25672AZ-2G1KZESZF has been tested at 1333, 1600, 1867, 2000 and + 2133MT/s speeds. For 1867MT/s and above, read-to-write turnaround time + increases by 1 clock. + + IFC/Local Bus + NAND flash: 8-bit, async or sync, up to 2GB. + NOR: 16-bit, Address/Data Multiplexed (ADM), up to 128 MB + NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB + - NOR devices support 16 virtual banks + GASIC: Minimal target within Qixis FPGA + PromJET rapid memory download support + Address demultiplexing handled within FPGA. + - Flexible demux allows 8 or 16 bit evaluation. + IFC Debug/Development card + - Support for 32-bit devices + Ethernet + Support two on-board RGMII 10/100/1G ethernet ports. + SGMII and XAUI support via SERDES block (see above). + 1588 support via Symmetricom board. + QIXIS System Logic FPGA + Manages system power and reset sequencing + Manages DUT, board, clock, etc. configuration for dynamic shmoo + Collects V-I-T data in background for code/power profiling. + Supports legacy TMT test features (POSt, IRS, SYSCLK-synchronous assertion) + General fault monitoring and logging + Runs from ATX “hot” power rails allowing operation while system is off. + Clocks + System and DDR clock (SYSCLK, “DDRCLK”) + - Switch selectable to one of 16 common settings in the interval 33MHz-166MHz. + - Software selectable in 1MHz increments from 1-200MHz. + SERDES clocks + - Provides clocks to all SerDes blocks and slots + - 100, 125 and 156.25 MHz + Power Supplies + Dedicated regulators for VDD + - Adjustable from (0.7V to 1.3V at 80A + - Regulators can be controlled by VID and/or software + Dedicated regulator for GVDD_PL: 1.35/1.5V at 22A + - VTT/MVREF automatically track operating voltage + Dedicated regulators/filters for AVDD supplies + Dedicated regulators for other supplies: OVDD, BVDD, DVDD, LVDD, POVDD, etc. + USB + Supports two USB 2.0 ports with integrated PHYs + - One type A, one type micro-AB with 1.0A power per port. + Other IO + eSDHC/MMC + - SDHC card slot + eSPI port + - High-speed serial flash + Two Serial port + Four I2C ports + +Memory map +---------- +The addresses in brackets are physical addresses. + +0x0_0000_0000 (0x0_0000_0000) - 0x0_7fff_ffff 2GB DDR (more than 2GB is initialized but not mapped under with TLB) +0x0_8000_0000 (0xc_0000_0000) - 0x0_dfff_ffff 1.5GB PCIE memory +0x0_f000_0000 (0xf_0000_0000) - 0x0_f03f_ffff 4MB DCSR +0x0_f400_0000 (0xf_f400_0000) - 0x0_f5ff_ffff 32MB BMan +0x0_f600_0000 (0xf_f600_0000) - 0x0_f7ff_ffff 32MB QMan +0x0_f800_0000 (0xf_f800_0000) - 0x0_f803_ffff 256KB PCIE IO +0x0_e000_0000 (0xf_e000_0000) - 0x0_efff_ffff 256MB NOR flash +0x0_fe00_0000 (0xf_fe00_0000) - 0x0_feff_ffff 16MB CCSR +0x0_ffdf_0000 (0xf_ffdf_0000) - 0x0_ffdf_03ff 4KB QIXIS +0x0_ffff_f000 (0x0_7fff_fff0) - 0x0_ffff_ffff 4KB Boot page translation for secondary cores + +The physical address of the last (boot page translation) varies with the actual DDR size. diff --git a/doc/driver-model/UDM-serial.txt b/doc/driver-model/UDM-serial.txt index e9c274d451..c6a8ab0521 100644 --- a/doc/driver-model/UDM-serial.txt +++ b/doc/driver-model/UDM-serial.txt @@ -125,67 +125,59 @@ III) Analysis of in-tree drivers ------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 17) serial_lh7a40x.c + 17) serial_max3100.c -------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 18) serial_lpc2292.c - -------------------- - No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - - 19) serial_max3100.c - -------------------- - No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - - 20) serial_mxc.c + 18) serial_mxc.c ---------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 21) serial_netarm.c + 19) serial_netarm.c ------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 22) serial_pl01x.c + 20) serial_pl01x.c ------------------ No support for CONFIG_SERIAL_MULTI. Simple conversion possible, though this driver in fact contains two drivers in total. - 23) serial_pxa.c + 21) serial_pxa.c ---------------- This driver is a bit complicated, but due to clean support for CONFIG_SERIAL_MULTI, there are no expected obstructions throughout the conversion process. - 24) serial_s3c24x0.c + 22) serial_s3c24x0.c -------------------- This driver, being quite ad-hoc might need some work to bring back to shape. - 25) serial_s3c44b0.c + 23) serial_s3c44b0.c -------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 26) serial_s5p.c + 24) serial_s5p.c ---------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 27) serial_sa1100.c + 25) serial_sa1100.c ------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 28) serial_sh.c + 26) serial_sh.c --------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 29) serial_xuartlite.c + 27) serial_xuartlite.c ---------------------- No support for CONFIG_SERIAL_MULTI. Simple conversion possible. - 30) usbtty.c + 28) usbtty.c ------------ This driver seems very complicated and entangled with USB framework. The conversion might be complicated here. - 31) arch/powerpc/cpu/mpc512x/serial.c + 29) arch/powerpc/cpu/mpc512x/serial.c ------------------------------------- This driver supports CONFIG_SERIAL_MULTI. This driver will need to be moved to proper place. diff --git a/doc/git-mailrc b/doc/git-mailrc index 7f60ef134a..6600c150dc 100644 --- a/doc/git-mailrc +++ b/doc/git-mailrc @@ -30,6 +30,7 @@ alias rbohmer Remy Bohmer <linux@bohmer.net> alias reinhardm Reinhard Meyer <u-boot@emk-elektronik.de> alias sbabic Stefano Babic <sbabic@denx.de> alias scottwood Scott Wood <scottwood@freescale.com> +alias sjg Simon Glass <sjg@chromium.org> alias smcnutt Scott McNutt <smcnutt@psyent.com> alias stroese Stefan Roese <sr@denx.de> alias vapier Mike Frysinger <vapier@gentoo.org> @@ -50,7 +51,7 @@ alias rmobile uboot, iwamatsu alias s3c samsung alias s5pc samsung alias samsung uboot, prom -alias tegra uboot, Simon Glass <sjg@chromium.org>, Tom Warren <twarren@nvidia.com>, Stephen Warren <swarren@nvidia.com> +alias tegra uboot, sjg, Tom Warren <twarren@nvidia.com>, Stephen Warren <swarren@nvidia.com> alias tegra2 tegra alias ti uboot, Tom Rini <trini@ti.com> @@ -84,7 +85,7 @@ alias ppc4xx uboot, stroese alias ppc7xx uboot, wd alias ppc74xx uboot, wd -alias sandbox Simon Glass <sjg@chromium.org> +alias sandbox sjg alias sb sandbox alias sparc uboot, Daniel Hellstrom <daniel@gaisler.com> @@ -92,7 +93,7 @@ alias sparc uboot, Daniel Hellstrom <daniel@gaisler.com> alias superh uboot, iwamatsu alias sh superh -alias x86 uboot, gruss +alias x86 uboot, sjg, gruss # Subsystem aliases alias cfi uboot, stroese diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c index 7b2ec505e1..8c785ae923 100644 --- a/drivers/block/ahci.c +++ b/drivers/block/ahci.c @@ -37,11 +37,28 @@ #include <linux/ctype.h> #include <ahci.h> +static int ata_io_flush(u8 port); + struct ahci_probe_ent *probe_ent = NULL; hd_driveid_t *ataid[AHCI_MAX_PORTS]; #define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0) +/* + * Some controllers limit number of blocks they can read/write at once. + * Contemporary SSD devices work much faster if the read/write size is aligned + * to a power of 2. Let's set default to 128 and allowing to be overwritten if + * needed. + */ +#ifndef MAX_SATA_BLOCKS_READ_WRITE +#define MAX_SATA_BLOCKS_READ_WRITE 0x80 +#endif + +/* Maximum timeouts for each event */ +#define WAIT_MS_SPINUP 10000 +#define WAIT_MS_DATAIO 5000 +#define WAIT_MS_FLUSH 5000 +#define WAIT_MS_LINKUP 4 static inline u32 ahci_port_base(u32 base, u32 port) { @@ -60,7 +77,39 @@ static void ahci_setup_port(struct ahci_ioports *port, unsigned long base, #define msleep(a) udelay(a * 1000) -#define ssleep(a) msleep(a * 1000) + +static void ahci_dcache_flush_range(unsigned begin, unsigned len) +{ + const unsigned long start = begin; + const unsigned long end = start + len; + + debug("%s: flush dcache: [%#lx, %#lx)\n", __func__, start, end); + flush_dcache_range(start, end); +} + +/* + * SATA controller DMAs to physical RAM. Ensure data from the + * controller is invalidated from dcache; next access comes from + * physical RAM. + */ +static void ahci_dcache_invalidate_range(unsigned begin, unsigned len) +{ + const unsigned long start = begin; + const unsigned long end = start + len; + + debug("%s: invalidate dcache: [%#lx, %#lx)\n", __func__, start, end); + invalidate_dcache_range(start, end); +} + +/* + * Ensure data for SATA controller is flushed out of dcache and + * written to physical memory. + */ +static void ahci_dcache_flush_sata_cmd(struct ahci_ioports *pp) +{ + ahci_dcache_flush_range((unsigned long)pp->cmd_slot, + AHCI_PORT_PRIV_DMA_SZ); +} static int waiting_for_cmd_completed(volatile u8 *offset, int timeout_msec, @@ -84,13 +133,15 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) unsigned short vendor; #endif volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base; - u32 tmp, cap_save; + u32 tmp, cap_save, cmd; int i, j; volatile u8 *port_mmio; + debug("ahci_host_init: start\n"); + cap_save = readl(mmio + HOST_CAP); cap_save &= ((1 << 28) | (1 << 17)); - cap_save |= (1 << 27); + cap_save |= (1 << 27); /* Staggered Spin-up. Not needed. */ /* global controller reset */ tmp = readl(mmio + HOST_CTL); @@ -100,13 +151,15 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) /* reset must complete within 1 second, or * the hardware should be considered fried. */ - ssleep(1); - - tmp = readl(mmio + HOST_CTL); - if (tmp & HOST_RESET) { - debug("controller reset failed (0x%x)\n", tmp); - return -1; - } + i = 1000; + do { + udelay(1000); + tmp = readl(mmio + HOST_CTL); + if (!i--) { + debug("controller reset failed (0x%x)\n", tmp); + return -1; + } + } while (tmp & HOST_RESET); writel_with_flush(HOST_AHCI_EN, mmio + HOST_CTL); writel(cap_save, mmio + HOST_CAP); @@ -129,6 +182,9 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) debug("cap 0x%x port_map 0x%x n_ports %d\n", probe_ent->cap, probe_ent->port_map, probe_ent->n_ports); + if (probe_ent->n_ports > CONFIG_SYS_SCSI_MAX_SCSI_ID) + probe_ent->n_ports = CONFIG_SYS_SCSI_MAX_SCSI_ID; + for (i = 0; i < probe_ent->n_ports; i++) { probe_ent->port[i].port_mmio = ahci_port_base((u32) mmio, i); port_mmio = (u8 *) probe_ent->port[i].port_mmio; @@ -138,6 +194,7 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) tmp = readl(port_mmio + PORT_CMD); if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | PORT_CMD_FIS_RX | PORT_CMD_START)) { + debug("Port %d is active. Deactivating.\n", i); tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | PORT_CMD_FIS_RX | PORT_CMD_START); writel_with_flush(tmp, port_mmio + PORT_CMD); @@ -148,16 +205,53 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) msleep(500); } - writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD); - + /* Add the spinup command to whatever mode bits may + * already be on in the command register. + */ + cmd = readl(port_mmio + PORT_CMD); + cmd |= PORT_CMD_FIS_RX; + cmd |= PORT_CMD_SPIN_UP; + writel_with_flush(cmd, port_mmio + PORT_CMD); + + /* Bring up SATA link. + * SATA link bringup time is usually less than 1 ms; only very + * rarely has it taken between 1-2 ms. Never seen it above 2 ms. + */ j = 0; - while (j < 100) { - msleep(10); + while (j < WAIT_MS_LINKUP) { tmp = readl(port_mmio + PORT_SCR_STAT); if ((tmp & 0xf) == 0x3) break; + udelay(1000); j++; } + if (j == WAIT_MS_LINKUP) { + printf("SATA link %d timeout.\n", i); + continue; + } else { + debug("SATA link ok.\n"); + } + + /* Clear error status */ + tmp = readl(port_mmio + PORT_SCR_ERR); + if (tmp) + writel(tmp, port_mmio + PORT_SCR_ERR); + + debug("Spinning up device on SATA port %d... ", i); + + j = 0; + while (j < WAIT_MS_SPINUP) { + tmp = readl(port_mmio + PORT_TFDATA); + if (!(tmp & (ATA_STAT_BUSY | ATA_STAT_DRQ))) + break; + udelay(1000); + j++; + } + printf("Target spinup took %d ms.\n", j); + if (j == WAIT_MS_SPINUP) + debug("timeout.\n"); + else + debug("ok.\n"); tmp = readl(port_mmio + PORT_SCR_ERR); debug("PORT_SCR_ERR 0x%x\n", tmp); @@ -174,9 +268,9 @@ static int ahci_host_init(struct ahci_probe_ent *probe_ent) /* set irq mask (enables interrupts) */ writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK); - /*register linkup ports */ + /* register linkup ports */ tmp = readl(port_mmio + PORT_SCR_STAT); - debug("Port %d status: 0x%x\n", i, tmp); + debug("SATA port %d status: 0x%x\n", i, tmp); if ((tmp & 0xf) == 0x03) probe_ent->link_port_map |= (0x01 << i); } @@ -202,12 +296,13 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) u16 cc; #endif volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base; - u32 vers, cap, impl, speed; + u32 vers, cap, cap2, impl, speed; const char *speed_s; const char *scc_s; vers = readl(mmio + HOST_VERSION); cap = probe_ent->cap; + cap2 = readl(mmio + HOST_CAP2); impl = probe_ent->port_map; speed = (cap >> 20) & 0xf; @@ -215,6 +310,8 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) speed_s = "1.5"; else if (speed == 2) speed_s = "3"; + else if (speed == 3) + speed_s = "6"; else speed_s = "?"; @@ -240,8 +337,9 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) ((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s); printf("flags: " - "%s%s%s%s%s%s" - "%s%s%s%s%s%s%s\n", + "%s%s%s%s%s%s%s" + "%s%s%s%s%s%s%s" + "%s%s%s%s%s%s\n", cap & (1 << 31) ? "64bit " : "", cap & (1 << 30) ? "ncq " : "", cap & (1 << 28) ? "ilck " : "", @@ -252,9 +350,16 @@ static void ahci_print_info(struct ahci_probe_ent *probe_ent) cap & (1 << 19) ? "nz " : "", cap & (1 << 18) ? "only " : "", cap & (1 << 17) ? "pmp " : "", + cap & (1 << 16) ? "fbss " : "", cap & (1 << 15) ? "pio " : "", cap & (1 << 14) ? "slum " : "", - cap & (1 << 13) ? "part " : ""); + cap & (1 << 13) ? "part " : "", + cap & (1 << 7) ? "ccc " : "", + cap & (1 << 6) ? "ems " : "", + cap & (1 << 5) ? "sxs " : "", + cap2 & (1 << 2) ? "apst " : "", + cap2 & (1 << 1) ? "nvmp " : "", + cap2 & (1 << 0) ? "boh " : ""); } #ifndef CONFIG_SCSI_AHCI_PLAT @@ -277,8 +382,8 @@ static int ahci_init_one(pci_dev_t pdev) probe_ent->pio_mask = 0x1f; probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */ - probe_ent->mmio_base = (u32)pci_map_bar(pdev, AHCI_PCI_BAR, - PCI_REGION_MEM); + pci_read_config_dword(pdev, PCI_BASE_ADDRESS_5, &probe_ent->mmio_base); + debug("ahci mmio_base=0x%08x\n", probe_ent->mmio_base); /* Take from kernel: * JMicron-specific fixup: @@ -342,6 +447,7 @@ static void ahci_fill_cmd_slot(struct ahci_ioports *pp, u32 opts) } +#ifdef CONFIG_AHCI_SETFEATURES_XFER static void ahci_set_feature(u8 port) { struct ahci_ioports *pp = &(probe_ent->port[port]); @@ -349,23 +455,26 @@ static void ahci_set_feature(u8 port) u32 cmd_fis_len = 5; /* five dwords */ u8 fis[20]; - /*set feature */ - memset(fis, 0, 20); + /* set feature */ + memset(fis, 0, sizeof(fis)); fis[0] = 0x27; fis[1] = 1 << 7; fis[2] = ATA_CMD_SETF; fis[3] = SETFEATURES_XFER; fis[12] = __ilog2(probe_ent->udma_mask + 1) + 0x40 - 0x01; - memcpy((unsigned char *)pp->cmd_tbl, fis, 20); + memcpy((unsigned char *)pp->cmd_tbl, fis, sizeof(fis)); ahci_fill_cmd_slot(pp, cmd_fis_len); + ahci_dcache_flush_sata_cmd(pp); writel(1, port_mmio + PORT_CMD_ISSUE); readl(port_mmio + PORT_CMD_ISSUE); - if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) { - printf("set feature error!\n"); + if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, + WAIT_MS_DATAIO, 0x1)) { + printf("set feature error on port %d!\n", port); } } +#endif static int ahci_port_start(u8 port) @@ -397,25 +506,27 @@ static int ahci_port_start(u8 port) * First item in chunk of DMA memory: 32-slot command table, * 32 bytes each in size */ - pp->cmd_slot = (struct ahci_cmd_hdr *)mem; - debug("cmd_slot = %p\n", pp->cmd_slot); + pp->cmd_slot = + (struct ahci_cmd_hdr *)(uintptr_t)virt_to_phys((void *)mem); + debug("cmd_slot = 0x%x\n", (unsigned)pp->cmd_slot); mem += (AHCI_CMD_SLOT_SZ + 224); /* * Second item: Received-FIS area */ - pp->rx_fis = mem; + pp->rx_fis = virt_to_phys((void *)mem); mem += AHCI_RX_FIS_SZ; /* * Third item: data area for storing a single command * and its scatter-gather table */ - pp->cmd_tbl = mem; + pp->cmd_tbl = virt_to_phys((void *)mem); debug("cmd_tbl_dma = 0x%x\n", pp->cmd_tbl); mem += AHCI_CMD_TBL_HDR; - pp->cmd_tbl_sg = (struct ahci_sg *)mem; + pp->cmd_tbl_sg = + (struct ahci_sg *)(uintptr_t)virt_to_phys((void *)mem); writel_with_flush((u32) pp->cmd_slot, port_mmio + PORT_LST_ADDR); @@ -431,8 +542,8 @@ static int ahci_port_start(u8 port) } -static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf, - int buf_len) +static int ahci_device_data_io(u8 port, u8 *fis, int fis_len, u8 *buf, + int buf_len, u8 is_write) { struct ahci_ioports *pp = &(probe_ent->port[port]); @@ -441,10 +552,10 @@ static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf, u32 port_status; int sg_count; - debug("Enter get_ahci_device_data: for port %d\n", port); + debug("Enter %s: for port %d\n", __func__, port); if (port > probe_ent->n_ports) { - printf("Invaild port number %d\n", port); + printf("Invalid port number %d\n", port); return -1; } @@ -457,17 +568,22 @@ static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf, memcpy((unsigned char *)pp->cmd_tbl, fis, fis_len); sg_count = ahci_fill_sg(port, buf, buf_len); - opts = (fis_len >> 2) | (sg_count << 16); + opts = (fis_len >> 2) | (sg_count << 16) | (is_write << 6); ahci_fill_cmd_slot(pp, opts); + ahci_dcache_flush_sata_cmd(pp); + ahci_dcache_flush_range((unsigned)buf, (unsigned)buf_len); + writel_with_flush(1, port_mmio + PORT_CMD_ISSUE); - if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) { + if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, + WAIT_MS_DATAIO, 0x1)) { printf("timeout exit!\n"); return -1; } - debug("get_ahci_device_data: %d byte transferred.\n", - pp->cmd_slot->status); + + ahci_dcache_invalidate_range((unsigned)buf, (unsigned)buf_len); + debug("%s: %d byte transferred.\n", __func__, pp->cmd_slot->status); return 0; } @@ -526,7 +642,7 @@ static int ata_scsiop_inquiry(ccb *pccb) if (pccb->datalen <= 35) return 0; - memset(fis, 0, 20); + memset(fis, 0, sizeof(fis)); /* Construct the FIS */ fis[0] = 0x27; /* Host to device FIS. */ fis[1] = 1 << 7; /* Command FIS. */ @@ -537,8 +653,8 @@ static int ata_scsiop_inquiry(ccb *pccb) if (!(tmpid = malloc(sizeof(hd_driveid_t)))) return -ENOMEM; - if (get_ahci_device_data(port, (u8 *) & fis, 20, - tmpid, sizeof(hd_driveid_t))) { + if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), tmpid, + sizeof(hd_driveid_t), 0)) { debug("scsi_ahci: SCSI inquiry command failure.\n"); return -EIO; } @@ -557,46 +673,91 @@ static int ata_scsiop_inquiry(ccb *pccb) /* - * SCSI READ10 command operation. + * SCSI READ10/WRITE10 command operation. */ -static int ata_scsiop_read10(ccb * pccb) +static int ata_scsiop_read_write(ccb *pccb, u8 is_write) { - u32 len = 0; + u32 lba = 0; + u16 blocks = 0; u8 fis[20]; + u8 *user_buffer = pccb->pdata; + u32 user_buffer_size = pccb->datalen; - len = (((u32) pccb->cmd[7]) << 8) | ((u32) pccb->cmd[8]); + /* Retrieve the base LBA number from the ccb structure. */ + memcpy(&lba, pccb->cmd + 2, sizeof(lba)); + lba = be32_to_cpu(lba); - /* For 10-byte and 16-byte SCSI R/W commands, transfer + /* + * And the number of blocks. + * + * For 10-byte and 16-byte SCSI R/W commands, transfer * length 0 means transfer 0 block of data. * However, for ATA R/W commands, sector count 0 means * 256 or 65536 sectors, not 0 sectors as in SCSI. * * WARNING: one or two older ATA drives treat 0 as 0... */ - if (!len) - return 0; - memset(fis, 0, 20); + blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]); - /* Construct the FIS */ - fis[0] = 0x27; /* Host to device FIS. */ - fis[1] = 1 << 7; /* Command FIS. */ - fis[2] = ATA_CMD_RD_DMA; /* Command byte. */ - - /* LBA address, only support LBA28 in this driver */ - fis[4] = pccb->cmd[5]; - fis[5] = pccb->cmd[4]; - fis[6] = pccb->cmd[3]; - fis[7] = (pccb->cmd[2] & 0x0f) | 0xe0; - - /* Sector Count */ - fis[12] = pccb->cmd[8]; - fis[13] = pccb->cmd[7]; - - /* Read from ahci */ - if (get_ahci_device_data(pccb->target, (u8 *) & fis, 20, - pccb->pdata, pccb->datalen)) { - debug("scsi_ahci: SCSI READ10 command failure.\n"); - return -EIO; + debug("scsi_ahci: %s %d blocks starting from lba 0x%x\n", + is_write ? "write" : "read", (unsigned)lba, blocks); + + /* Preset the FIS */ + memset(fis, 0, sizeof(fis)); + fis[0] = 0x27; /* Host to device FIS. */ + fis[1] = 1 << 7; /* Command FIS. */ + /* Command byte (read/write). */ + fis[2] = is_write ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT; + + while (blocks) { + u16 now_blocks; /* number of blocks per iteration */ + u32 transfer_size; /* number of bytes per iteration */ + + now_blocks = min(MAX_SATA_BLOCKS_READ_WRITE, blocks); + + transfer_size = ATA_BLOCKSIZE * now_blocks; + if (transfer_size > user_buffer_size) { + printf("scsi_ahci: Error: buffer too small.\n"); + return -EIO; + } + + /* LBA48 SATA command but only use 32bit address range within + * that. The next smaller command range (28bit) is too small. + */ + fis[4] = (lba >> 0) & 0xff; + fis[5] = (lba >> 8) & 0xff; + fis[6] = (lba >> 16) & 0xff; + fis[7] = 1 << 6; /* device reg: set LBA mode */ + fis[8] = ((lba >> 24) & 0xff); + fis[3] = 0xe0; /* features */ + + /* Block (sector) count */ + fis[12] = (now_blocks >> 0) & 0xff; + fis[13] = (now_blocks >> 8) & 0xff; + + /* Read/Write from ahci */ + if (ahci_device_data_io(pccb->target, (u8 *) &fis, sizeof(fis), + user_buffer, user_buffer_size, + is_write)) { + debug("scsi_ahci: SCSI %s10 command failure.\n", + is_write ? "WRITE" : "READ"); + return -EIO; + } + + /* If this transaction is a write, do a following flush. + * Writes in u-boot are so rare, and the logic to know when is + * the last write and do a flush only there is sufficiently + * difficult. Just do a flush after every write. This incurs, + * usually, one extra flush when the rare writes do happen. + */ + if (is_write) { + if (-EIO == ata_io_flush(pccb->target)) + return -EIO; + } + user_buffer += transfer_size; + user_buffer_size -= transfer_size; + blocks -= now_blocks; + lba += now_blocks; } return 0; @@ -609,6 +770,7 @@ static int ata_scsiop_read10(ccb * pccb) static int ata_scsiop_read_capacity10(ccb *pccb) { u32 cap; + u32 block_size; if (!ataid[pccb->target]) { printf("scsi_ahci: SCSI READ CAPACITY10 command failure. " @@ -618,11 +780,52 @@ static int ata_scsiop_read_capacity10(ccb *pccb) } cap = le32_to_cpu(ataid[pccb->target]->lba_capacity); + if (cap == 0xfffffff) { + unsigned short *cap48 = ataid[pccb->target]->lba48_capacity; + if (cap48[2] || cap48[3]) { + cap = 0xffffffff; + } else { + cap = (le16_to_cpu(cap48[1]) << 16) | + (le16_to_cpu(cap48[0])); + } + } + + cap = cpu_to_be32(cap); + memcpy(pccb->pdata, &cap, sizeof(cap)); + + block_size = cpu_to_be32((u32)512); + memcpy(&pccb->pdata[4], &block_size, 4); + + return 0; +} + + +/* + * SCSI READ CAPACITY16 command operation. + */ +static int ata_scsiop_read_capacity16(ccb *pccb) +{ + u64 cap; + u64 block_size; + + if (!ataid[pccb->target]) { + printf("scsi_ahci: SCSI READ CAPACITY16 command failure. " + "\tNo ATA info!\n" + "\tPlease run SCSI commmand INQUIRY firstly!\n"); + return -EPERM; + } + + cap = le32_to_cpu(ataid[pccb->target]->lba_capacity); + if (cap == 0xfffffff) { + memcpy(&cap, ataid[pccb->target]->lba48_capacity, sizeof(cap)); + cap = le64_to_cpu(cap); + } + + cap = cpu_to_be64(cap); memcpy(pccb->pdata, &cap, sizeof(cap)); - pccb->pdata[4] = pccb->pdata[5] = 0; - pccb->pdata[6] = 512 >> 8; - pccb->pdata[7] = 512 & 0xff; + block_size = cpu_to_be64((u64)512); + memcpy(&pccb->pdata[8], &block_size, 8); return 0; } @@ -643,11 +846,17 @@ int scsi_exec(ccb *pccb) switch (pccb->cmd[0]) { case SCSI_READ10: - ret = ata_scsiop_read10(pccb); + ret = ata_scsiop_read_write(pccb, 0); break; - case SCSI_RD_CAPAC: + case SCSI_WRITE10: + ret = ata_scsiop_read_write(pccb, 1); + break; + case SCSI_RD_CAPAC10: ret = ata_scsiop_read_capacity10(pccb); break; + case SCSI_RD_CAPAC16: + ret = ata_scsiop_read_capacity16(pccb); + break; case SCSI_TST_U_RDY: ret = ata_scsiop_test_unit_ready(pccb); break; @@ -685,7 +894,9 @@ void scsi_low_level_init(int busdevfunc) printf("Can not start port %d\n", i); continue; } +#ifdef CONFIG_AHCI_SETFEATURES_XFER ahci_set_feature((u8) i); +#endif } } } @@ -726,7 +937,9 @@ int ahci_init(u32 base) printf("Can not start port %d\n", i); continue; } +#ifdef CONFIG_AHCI_SETFEATURES_XFER ahci_set_feature((u8) i); +#endif } } err_out: @@ -734,6 +947,42 @@ err_out: } #endif +/* + * In the general case of generic rotating media it makes sense to have a + * flush capability. It probably even makes sense in the case of SSDs because + * one cannot always know for sure what kind of internal cache/flush mechanism + * is embodied therein. At first it was planned to invoke this after the last + * write to disk and before rebooting. In practice, knowing, a priori, which + * is the last write is difficult. Because writing to the disk in u-boot is + * very rare, this flush command will be invoked after every block write. + */ +static int ata_io_flush(u8 port) +{ + u8 fis[20]; + struct ahci_ioports *pp = &(probe_ent->port[port]); + volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio; + u32 cmd_fis_len = 5; /* five dwords */ + + /* Preset the FIS */ + memset(fis, 0, 20); + fis[0] = 0x27; /* Host to device FIS. */ + fis[1] = 1 << 7; /* Command FIS. */ + fis[2] = ATA_CMD_FLUSH_EXT; + + memcpy((unsigned char *)pp->cmd_tbl, fis, 20); + ahci_fill_cmd_slot(pp, cmd_fis_len); + writel_with_flush(1, port_mmio + PORT_CMD_ISSUE); + + if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, + WAIT_MS_FLUSH, 0x1)) { + debug("scsi_ahci: flush command timeout on port %d.\n", port); + return -EIO; + } + + return 0; +} + + void scsi_bus_reset(void) { /*Not implement*/ diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c index fda3389e8b..1f9d7b097c 100644 --- a/drivers/block/fsl_sata.c +++ b/drivers/block/fsl_sata.c @@ -56,25 +56,6 @@ static inline void sdelay(unsigned long sec) mdelay(1000); } -void dprint_buffer(unsigned char *buf, int len) -{ - int i, j; - - i = 0; - j = 0; - printf("\n\r"); - - for (i = 0; i < len; i++) { - printf("%02x ", *buf++); - j++; - if (j == 16) { - printf("\n\r"); - j = 0; - } - } - printf("\n\r"); -} - static void fsl_sata_dump_sfis(struct sata_fis_d2h *s) { printf("Status FIS dump:\n\r"); @@ -94,7 +75,7 @@ static void fsl_sata_dump_sfis(struct sata_fis_d2h *s) printf("sector_count_exp: %02x\n\r", s->sector_count_exp); } -static int ata_wait_register(volatile unsigned *addr, u32 mask, +static int ata_wait_register(unsigned __iomem *addr, u32 mask, u32 val, u32 timeout_msec) { int i; @@ -112,7 +93,7 @@ int init_sata(int dev) cmd_hdr_tbl_t *cmd_hdr; u32 cda; u32 val32; - fsl_sata_reg_t *reg; + fsl_sata_reg_t __iomem *reg; u32 sig; int i; fsl_sata_t *sata; @@ -287,42 +268,7 @@ int init_sata(int dev) return 0; } -/* Hardware reset, like Power-on and COMRESET */ -void fsl_sata_hardware_reset(u32 reg_base) -{ - fsl_sata_reg_t *reg = (fsl_sata_reg_t *)reg_base; - u32 scontrol; - - /* Disable the SATA interface and put PHY offline */ - scontrol = in_le32(®->scontrol); - scontrol = (scontrol & 0x0f0) | 0x304; - out_le32(®->scontrol, scontrol); - - /* No speed strict */ - scontrol = in_le32(®->scontrol); - scontrol = scontrol & ~0x0f0; - out_le32(®->scontrol, scontrol); - - /* Issue PHY wake/reset, Hardware_reset_asserted */ - scontrol = in_le32(®->scontrol); - scontrol = (scontrol & 0x0f0) | 0x301; - out_le32(®->scontrol, scontrol); - - mdelay(100); - - /* Resume PHY, COMRESET negated, the device initialize hardware - * and execute diagnostics, send good status-signature to host, - * which is D2H register FIS, and then the device enter idle state. - */ - scontrol = in_le32(®->scontrol); - scontrol = (scontrol & 0x0f0) | 0x300; - out_le32(®->scontrol, scontrol); - - mdelay(100); - return; -} - -static void fsl_sata_dump_regs(fsl_sata_reg_t *reg) +static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg) { printf("\n\rSATA: %08x\n\r", (u32)reg); printf("CQR: %08x\n\r", in_le32(®->cqr)); @@ -363,7 +309,7 @@ static int fsl_ata_exec_ata_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis u32 prde_count; u32 val32; u32 ttl; - fsl_sata_reg_t *reg = sata->reg_base; + fsl_sata_reg_t __iomem *reg = sata->reg_base; int i; /* Check xfer length */ @@ -620,7 +566,7 @@ static u32 fsl_sata_rw_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_wr return blkcnt; } -void fsl_sata_flush_cache(int dev) +static void fsl_sata_flush_cache(int dev) { fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; struct sata_fis_h2d h2d, *cfis = &h2d; @@ -664,7 +610,8 @@ static u32 fsl_sata_rw_cmd_ext(int dev, u32 start, u32 blkcnt, u8 *buffer, int i return blkcnt; } -u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write) +static u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, + int is_write) { fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; struct sata_fis_h2d h2d, *cfis = &h2d; @@ -707,7 +654,7 @@ u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write return blkcnt; } -void fsl_sata_flush_cache_ext(int dev) +static void fsl_sata_flush_cache_ext(int dev) { fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; struct sata_fis_h2d h2d, *cfis = &h2d; @@ -721,12 +668,6 @@ void fsl_sata_flush_cache_ext(int dev) fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0); } -/* Software reset, set SRST of the Device Control register */ -void fsl_sata_software_reset(int dev) -{ - return; -} - static void fsl_sata_init_wcache(int dev, u16 *id) { fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; @@ -757,7 +698,7 @@ static int fsl_sata_get_flush_ext(int dev) return sata->flush_ext; } -u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt, +static u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt, const void *buffer, int is_write) { u32 start, blks; @@ -792,8 +733,8 @@ u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt, return blkcnt; } -u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt, const void *buffer, - int is_write) +static u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt, + const void *buffer, int is_write) { u32 start, blks; u8 *addr; diff --git a/drivers/block/fsl_sata.h b/drivers/block/fsl_sata.h index cecff68da3..a9c27bc868 100644 --- a/drivers/block/fsl_sata.h +++ b/drivers/block/fsl_sata.h @@ -176,10 +176,11 @@ typedef struct fsl_sata_reg { * Command Header Entry */ typedef struct cmd_hdr_entry { - u32 cda; /* Command Descriptor Address, 4 bytes aligned */ - u32 prde_fis_len; /* Number of PRD entries and FIS length */ - u32 ttl; /* Total transfer length */ - u32 attribute; /* the attribute of command */ + __le32 cda; /* Command Descriptor Address, + 4 bytes aligned */ + __le32 prde_fis_len; /* Number of PRD entries and FIS length */ + __le32 ttl; /* Total transfer length */ + __le32 attribute; /* the attribute of command */ } __attribute__ ((packed)) cmd_hdr_entry_t; #define SATA_HC_CMD_HDR_ENTRY_SIZE sizeof(struct cmd_hdr_entry) @@ -230,10 +231,10 @@ typedef struct cmd_hdr_tbl { * PRD entry - Physical Region Descriptor entry */ typedef struct prd_entry { - u32 dba; /* Data base address, 4 bytes aligned */ + __le32 dba; /* Data base address, 4 bytes aligned */ u32 res1; u32 res2; - u32 ext_c_ddc; /* Indirect PRD flags, snoop and data word count */ + __le32 ext_c_ddc; /* Indirect PRD flags, snoop and data word count */ } __attribute__ ((packed)) prd_entry_t; #define SATA_HC_CMD_DESC_PRD_SIZE sizeof(struct prd_entry) diff --git a/drivers/block/sata_sil.c b/drivers/block/sata_sil.c index 245b872f99..b70f04de8b 100644 --- a/drivers/block/sata_sil.c +++ b/drivers/block/sata_sil.c @@ -27,6 +27,7 @@ #include <fis.h> #include <sata.h> #include <libata.h> +#include <sata.h> #include "sata_sil.h" /* Convert sectorsize to wordsize */ @@ -369,8 +370,8 @@ static ulong sil_sata_rw_cmd_ext(int dev, ulong start, ulong blkcnt, return blkcnt; } -ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt, - const void *buffer, int is_write) +static ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt, + const void *buffer, int is_write) { ulong start, blks, max_blks; u8 *addr; @@ -397,8 +398,8 @@ ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt, return blkcnt; } -ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt, - const void *buffer, int is_write) +static ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt, + const void *buffer, int is_write) { ulong start, blks, max_blks; u8 *addr; @@ -427,7 +428,7 @@ ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt, return blkcnt; } -void sil_sata_cmd_flush_cache(int dev) +static void sil_sata_cmd_flush_cache(int dev) { struct sil_cmd_block cmdb, *pcmd = &cmdb; @@ -439,7 +440,7 @@ void sil_sata_cmd_flush_cache(int dev) sil_exec_cmd(dev, pcmd, 0); } -void sil_sata_cmd_flush_cache_ext(int dev) +static void sil_sata_cmd_flush_cache_ext(int dev) { struct sil_cmd_block cmdb, *pcmd = &cmdb; diff --git a/drivers/fpga/cyclon2.c b/drivers/fpga/cyclon2.c index 26494a3f89..0773e731eb 100644 --- a/drivers/fpga/cyclon2.c +++ b/drivers/fpga/cyclon2.c @@ -144,6 +144,8 @@ static int CYC2_ps_load(Altera_desc *desc, const void *buf, size_t bsize) } /* Establish the initial state */ + (*fn->config) (FALSE, TRUE, cookie); /* De-assert nCONFIG */ + udelay(100); (*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */ udelay(2); /* T_cfg > 2us */ diff --git a/drivers/gpio/mpc83xx_gpio.c b/drivers/gpio/mpc83xx_gpio.c index a9afcb2dd6..e167852b83 100644 --- a/drivers/gpio/mpc83xx_gpio.c +++ b/drivers/gpio/mpc83xx_gpio.c @@ -163,7 +163,7 @@ int gpio_set_value(unsigned gpio, int value) } /* Configure GPIO registers early */ -void mpc83xx_gpio_init_f() +void mpc83xx_gpio_init_f(void) { immap_t *im = (immap_t *)CONFIG_SYS_IMMR; @@ -187,7 +187,7 @@ void mpc83xx_gpio_init_f() } /* Initialize GPIO soft-copies */ -void mpc83xx_gpio_init_r() +void mpc83xx_gpio_init_r(void) { #if MPC83XX_GPIO_CTRLRS >= 1 gpio_output_value[0] = CONFIG_MPC83XX_GPIO_0_INIT_VALUE; diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 5b017a910c..3cb232fdd1 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -214,7 +214,7 @@ static unsigned int set_i2c_bus_speed(const struct fsl_i2c *dev, return speed; } -unsigned int get_i2c_clock(int bus) +static unsigned int get_i2c_clock(int bus) { if (bus) return gd->i2c2_clk; /* I2C2 clock */ diff --git a/drivers/i2c/sh_i2c.c b/drivers/i2c/sh_i2c.c index 3147123bba..44ba90ef57 100644 --- a/drivers/i2c/sh_i2c.c +++ b/drivers/i2c/sh_i2c.c @@ -43,12 +43,18 @@ static struct sh_i2c *base; #define SH_I2C_ICCR_SCP (1 << 0) /* ICSR / ICIC */ -#define SH_IC_BUSY (1 << 3) +#define SH_IC_BUSY (1 << 4) #define SH_IC_TACK (1 << 2) #define SH_IC_WAIT (1 << 1) #define SH_IC_DTE (1 << 0) -static u8 iccl, icch; +#ifdef CONFIG_SH_I2C_8BIT +/* store 8th bit of iccl and icch in ICIC register */ +#define SH_I2C_ICIC_ICCLB8 (1 << 7) +#define SH_I2C_ICIC_ICCHB8 (1 << 6) +#endif + +static u16 iccl, icch; #define IRQ_WAIT 1000 @@ -63,6 +69,20 @@ static void irq_dte(struct sh_i2c *base) } } +static int irq_dte_with_tack(struct sh_i2c *base) +{ + int i; + + for (i = 0 ; i < IRQ_WAIT ; i++) { + if (SH_IC_DTE & readb(&base->icsr)) + break; + if (SH_IC_TACK & readb(&base->icsr)) + return -1; + udelay(10); + } + return 0; +} + static void irq_busy(struct sh_i2c *base) { int i; @@ -74,71 +94,97 @@ static void irq_busy(struct sh_i2c *base) } } -static void i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg, int stop) +static int i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg, int stop) { - writeb(readb(&base->iccr) & ~SH_I2C_ICCR_ICE, &base->iccr); - writeb(readb(&base->iccr) | SH_I2C_ICCR_ICE, &base->iccr); - - writeb(iccl, &base->iccl); - writeb(icch, &base->icch); - writeb(0, &base->icic); + u8 icic = SH_IC_TACK; + + clrbits_8(&base->iccr, SH_I2C_ICCR_ICE); + setbits_8(&base->iccr, SH_I2C_ICCR_ICE); + + writeb(iccl & 0xff, &base->iccl); + writeb(icch & 0xff, &base->icch); +#ifdef CONFIG_SH_I2C_8BIT + if (iccl > 0xff) + icic |= SH_I2C_ICIC_ICCLB8; + if (icch > 0xff) + icic |= SH_I2C_ICIC_ICCHB8; +#endif + writeb(icic, &base->icic); writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr); irq_dte(base); + clrbits_8(&base->icsr, SH_IC_TACK); writeb(id << 1, &base->icdr); - irq_dte(base); + if (irq_dte_with_tack(base) != 0) + return -1; writeb(reg, &base->icdr); if (stop) writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS), &base->iccr); - irq_dte(base); + if (irq_dte_with_tack(base) != 0) + return -1; + return 0; } static void i2c_finish(struct sh_i2c *base) { writeb(0, &base->icsr); - writeb(readb(&base->iccr) & ~SH_I2C_ICCR_ICE, &base->iccr); + clrbits_8(&base->iccr, SH_I2C_ICCR_ICE); } -static void i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 val) +static int i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 val) { - i2c_set_addr(base, id, reg, 0); + int ret = -1; + if (i2c_set_addr(base, id, reg, 0) != 0) + goto exit0; udelay(10); writeb(val, &base->icdr); - irq_dte(base); + if (irq_dte_with_tack(base) != 0) + goto exit0; writeb((SH_I2C_ICCR_ICE | SH_I2C_ICCR_RTS), &base->iccr); - irq_dte(base); + if (irq_dte_with_tack(base) != 0) + goto exit0; irq_busy(base); - + ret = 0; +exit0: i2c_finish(base); + return ret; } -static u8 i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg) +static int i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg) { - u8 ret; - - i2c_set_addr(base, id, reg, 1); + int ret = -1; + +#if defined(CONFIG_SH73A0) + if (i2c_set_addr(base, id, reg, 0) != 0) + goto exit0; +#else + if (i2c_set_addr(base, id, reg, 1) != 0) + goto exit0; udelay(100); +#endif writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr); irq_dte(base); writeb(id << 1 | 0x01, &base->icdr); - irq_dte(base); + if (irq_dte_with_tack(base) != 0) + goto exit0; writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_SCP), &base->iccr); - irq_dte(base); + if (irq_dte_with_tack(base) != 0) + goto exit0; - ret = readb(&base->icdr); + ret = readb(&base->icdr) & 0xff; writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RACK), &base->iccr); readb(&base->icdr); /* Dummy read */ irq_busy(base); - +exit0: i2c_finish(base); return ret; @@ -166,6 +212,21 @@ int i2c_set_bus_num(unsigned int bus) case 1: base = (void *)CONFIG_SH_I2C_BASE1; break; +#ifdef CONFIG_SH_I2C_BASE2 + case 2: + base = (void *)CONFIG_SH_I2C_BASE2; + break; +#endif +#ifdef CONFIG_SH_I2C_BASE3 + case 3: + base = (void *)CONFIG_SH_I2C_BASE3; + break; +#endif +#ifdef CONFIG_SH_I2C_BASE4 + case 4: + base = (void *)CONFIG_SH_I2C_BASE4; + break; +#endif default: return -1; } @@ -206,18 +267,18 @@ void i2c_init(int speed, int slaveaddr) denom = speed * (CONFIG_SH_I2C_DATA_HIGH + CONFIG_SH_I2C_DATA_LOW); tmp = num * 10 / denom; if (tmp % 10 >= 5) - iccl = (u8)((num/denom) + 1); + iccl = (u16)((num/denom) + 1); else - iccl = (u8)(num/denom); + iccl = (u16)(num/denom); /* Calculate the value for icch. From the data sheet: icch = (p clock / transfer rate) * (H / (L + H)) */ num = CONFIG_SH_I2C_CLOCK * CONFIG_SH_I2C_DATA_HIGH; tmp = num * 10 / denom; if (tmp % 10 >= 5) - icch = (u8)((num/denom) + 1); + icch = (u16)((num/denom) + 1); else - icch = (u8)(num/denom); + icch = (u16)(num/denom); } /* @@ -235,10 +296,14 @@ void i2c_init(int speed, int slaveaddr) */ int i2c_read(u8 chip, u32 addr, int alen, u8 *buffer, int len) { + int ret; int i = 0; - for (i = 0 ; i < len ; i++) - buffer[i] = i2c_raw_read(base, chip, addr + i); - + for (i = 0 ; i < len ; i++) { + ret = i2c_raw_read(base, chip, addr + i); + if (ret < 0) + return -1; + buffer[i] = ret & 0xff; + } return 0; } @@ -259,8 +324,8 @@ int i2c_write(u8 chip, u32 addr, int alen, u8 *buffer, int len) { int i = 0; for (i = 0; i < len ; i++) - i2c_raw_write(base, chip, addr + i, buffer[i]); - + if (i2c_raw_write(base, chip, addr + i, buffer[i]) != 0) + return -1; return 0; } @@ -272,5 +337,9 @@ int i2c_write(u8 chip, u32 addr, int alen, u8 *buffer, int len) */ int i2c_probe(u8 chip) { - return 0; + int ret; + + ret = i2c_set_addr(base, chip, 0, 1); + i2c_finish(base); + return ret; } diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index 36c6114e3c..1595c0714a 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -41,9 +41,6 @@ #ifdef CONFIG_IXP425 /* only valid for IXP425 */ #include <asm/arch/ixp425.h> #endif -#ifdef CONFIG_LPC2292 -#include <asm/arch/hardware.h> -#endif #if defined(CONFIG_MPC852T) || defined(CONFIG_MPC866) #include <asm/io.h> #endif diff --git a/drivers/input/i8042.c b/drivers/input/i8042.c index c3bc5360ca..26958aaa3e 100644 --- a/drivers/input/i8042.c +++ b/drivers/input/i8042.c @@ -26,6 +26,7 @@ /* includes */ #include <common.h> +#include <linux/compiler.h> #ifdef CONFIG_USE_CPCIDVI extern u8 gt_cpcidvi_in8(u32 offset); @@ -320,6 +321,54 @@ static int kbd_controller_present(void) return in8(I8042_STATUS_REG) != 0xff; } +/* + * Implement a weak default function for boards that optionally + * need to skip the i8042 initialization. + */ +int __weak board_i8042_skip(void) +{ + /* As default, don't skip */ + return 0; +} + +void i8042_flush(void) +{ + int timeout; + + /* + * The delay is to give the keyboard controller some time to fill the + * next byte. + */ + while (1) { + timeout = 100; /* wait for no longer than 100us */ + while (timeout > 0 && !(in8(I8042_STATUS_REG) & 0x01)) { + udelay(1); + timeout--; + } + + /* Try to pull next byte if not timeout. */ + if (in8(I8042_STATUS_REG) & 0x01) + in8(I8042_DATA_REG); + else + break; + } +} + +int i8042_disable(void) +{ + if (kbd_input_empty() == 0) + return -1; + + /* Disable keyboard */ + out8(I8042_COMMAND_REG, 0xad); + + if (kbd_input_empty() == 0) + return -1; + + return 0; +} + + /******************************************************************************* * * i8042_kbd_init - reset keyboard and init state flags @@ -329,7 +378,7 @@ int i8042_kbd_init(void) int keymap, try; char *penv; - if (!kbd_controller_present()) + if (!kbd_controller_present() || board_i8042_skip()) return -1; #ifdef CONFIG_USE_CPCIDVI @@ -607,11 +656,22 @@ static void kbd_led_set(void) static int kbd_input_empty(void) { - int kbdTimeout = KBD_TIMEOUT; + int kbdTimeout = KBD_TIMEOUT * 1000; + + while ((in8(I8042_STATUS_REG) & I8042_STATUS_IN_DATA) && kbdTimeout--) + udelay(1); + + return kbdTimeout != -1; +} + +/******************************************************************************/ + +static int wait_until_kbd_output_full(void) +{ + int kbdTimeout = KBD_TIMEOUT * 1000; - /* wait for input buf empty */ - while ((in8(I8042_STATUS_REG) & 0x02) && kbdTimeout--) - udelay(1000); + while (((in8(I8042_STATUS_REG) & 0x01) == 0) && kbdTimeout--) + udelay(1); return kbdTimeout != -1; } @@ -620,31 +680,39 @@ static int kbd_input_empty(void) static int kbd_reset(void) { + /* KB Reset */ if (kbd_input_empty() == 0) return -1; out8(I8042_DATA_REG, 0xff); - udelay(250000); + if (wait_until_kbd_output_full() == 0) + return -1; + + if (in8(I8042_DATA_REG) != 0xfa) /* ACK */ + return -1; + + if (wait_until_kbd_output_full() == 0) + return -1; + + if (in8(I8042_DATA_REG) != 0xaa) /* Test Pass*/ + return -1; if (kbd_input_empty() == 0) return -1; -#ifdef CONFIG_USE_CPCIDVI + /* Set KBC mode */ out8(I8042_COMMAND_REG, 0x60); -#else - out8(I8042_DATA_REG, 0x60); -#endif if (kbd_input_empty() == 0) return -1; out8(I8042_DATA_REG, 0x45); - if (kbd_input_empty() == 0) return -1; + /* Enable Keyboard */ out8(I8042_COMMAND_REG, 0xae); if (kbd_input_empty() == 0) diff --git a/drivers/input/input.c b/drivers/input/input.c index 5b2b4b0714..04fa5f0bd2 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -93,8 +93,24 @@ static unsigned char kbd_ctrl_xlate[] = { '\r', 0xff, 0xff }; +/* + * Scan key code to ANSI 3.64 escape sequence table. This table is + * incomplete in that it does not include all possible extra keys. + */ +static struct { + int kbd_scan_code; + char *escape; +} kbd_to_ansi364[] = { + { KEY_UP, "\033[A"}, + { KEY_DOWN, "\033[B"}, + { KEY_RIGHT, "\033[C"}, + { KEY_LEFT, "\033[D"}, +}; + +/* Maximum number of output characters that an ANSI sequence expands to */ +#define ANSI_CHAR_MAX 3 -int input_queue_ascii(struct input_config *config, int ch) +static int input_queue_ascii(struct input_config *config, int ch) { if (config->fifo_in + 1 == INPUT_BUFFER_LEN) { if (!config->fifo_out) @@ -289,24 +305,67 @@ static int input_check_keycodes(struct input_config *config, } /** + * Checks and converts a special key code into ANSI 3.64 escape sequence. + * + * @param config Input state + * @param keycode Key code to examine + * @param output_ch Buffer to place output characters into. It should + * be at least ANSI_CHAR_MAX bytes long, to allow for + * an ANSI sequence. + * @param max_chars Maximum number of characters to add to output_ch + * @return number of characters output, if the key was converted, otherwise 0. + * This may be larger than max_chars, in which case the overflow + * characters are not output. + */ +static int input_keycode_to_ansi364(struct input_config *config, + int keycode, char output_ch[], int max_chars) +{ + const char *escape; + int ch_count; + int i; + + for (i = ch_count = 0; i < ARRAY_SIZE(kbd_to_ansi364); i++) { + if (keycode != kbd_to_ansi364[i].kbd_scan_code) + continue; + for (escape = kbd_to_ansi364[i].escape; *escape; escape++) { + if (ch_count < max_chars) + output_ch[ch_count] = *escape; + ch_count++; + } + return ch_count; + } + + return 0; +} + +/** + * Converts and queues a list of key codes in escaped ASCII string form * Convert a list of key codes into ASCII * * You must call input_check_keycodes() before this. It turns the keycode - * list into a list of ASCII characters which are ready to send to the - * input layer. + * list into a list of ASCII characters and sends them to the input layer. * * Characters which were seen last time do not generate fresh ASCII output. + * The output (calls to queue_ascii) may be longer than num_keycodes, if the + * keycode contains special keys that was encoded to longer escaped sequence. * * @param config Input state * @param keycode List of key codes to examine * @param num_keycodes Number of key codes + * @param output_ch Buffer to place output characters into. It should + * be at last ANSI_CHAR_MAX * num_keycodes, to allow for + * ANSI sequences. + * @param max_chars Maximum number of characters to add to output_ch * @param same Number of key codes which are the same + * @return number of characters written into output_ch, or -1 if we would + * exceed max_chars chars. */ static int input_keycodes_to_ascii(struct input_config *config, - int keycode[], int num_keycodes, char output_ch[], int same) + int keycode[], int num_keycodes, char output_ch[], + int max_chars, int same) { struct input_key_xlate *table; - int ch_count; + int ch_count = 0; int i; table = &config->table[0]; @@ -321,19 +380,31 @@ static int input_keycodes_to_ascii(struct input_config *config, } } - /* now find normal keys */ - for (i = ch_count = 0; i < num_keycodes; i++) { + /* Start conversion by looking for the first new keycode (by same). */ + for (i = same; i < num_keycodes; i++) { int key = keycode[i]; + int ch = (key < table->num_entries) ? table->xlate[key] : 0xff; - if (key < table->num_entries && i >= same) { - int ch = table->xlate[key]; - - /* If a normal key with an ASCII value, add it! */ - if (ch != 0xff) - output_ch[ch_count++] = (uchar)ch; + /* + * For a normal key (with an ASCII value), add it; otherwise + * translate special key to escape sequence if possible. + */ + if (ch != 0xff) { + if (ch_count < max_chars) + output_ch[ch_count] = (uchar)ch; + ch_count++; + } else { + ch_count += input_keycode_to_ansi364(config, key, + output_ch, max_chars); } } + if (ch_count > max_chars) { + debug("%s: Output char buffer overflow size=%d, need=%d\n", + __func__, max_chars, ch_count); + return -1; + } + /* ok, so return keys */ return ch_count; } @@ -341,7 +412,7 @@ static int input_keycodes_to_ascii(struct input_config *config, int input_send_keycodes(struct input_config *config, int keycode[], int num_keycodes) { - char ch[num_keycodes]; + char ch[num_keycodes * ANSI_CHAR_MAX]; int count, i, same = 0; int is_repeat = 0; unsigned delay_ms; @@ -363,7 +434,7 @@ int input_send_keycodes(struct input_config *config, } count = input_keycodes_to_ascii(config, keycode, num_keycodes, - ch, is_repeat ? 0 : same); + ch, sizeof(ch), is_repeat ? 0 : same); for (i = 0; i < count; i++) input_queue_ascii(config, ch[i]); delay_ms = is_repeat ? @@ -371,7 +442,8 @@ int input_send_keycodes(struct input_config *config, config->repeat_delay_ms; config->next_repeat_ms = get_timer(0) + delay_ms; - return 0; + + return count; } int input_add_table(struct input_config *config, int left_keycode, diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 565ba6a383..a1dd7302bf 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -41,12 +41,12 @@ COBJS-$(CONFIG_MV_SDHCI) += mv_sdhci.o COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o COBJS-$(CONFIG_MXS_MMC) += mxsmmc.o COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o -COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o COBJS-$(CONFIG_SDHCI) += sdhci.o COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o +COBJS-$(CONFIG_DWMMC) += dw_mmc.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c new file mode 100644 index 0000000000..4070d4ea53 --- /dev/null +++ b/drivers/mmc/dw_mmc.c @@ -0,0 +1,385 @@ +/* + * (C) Copyright 2012 SAMSUNG Electronics + * Jaehoon Chung <jh80.chung@samsung.com> + * Rajeshawari Shinde <rajeshwari.s@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <common.h> +#include <malloc.h> +#include <mmc.h> +#include <dwmmc.h> +#include <asm/arch/clk.h> +#include <asm-generic/errno.h> + +#define PAGE_SIZE 4096 + +static int dwmci_wait_reset(struct dwmci_host *host, u32 value) +{ + unsigned long timeout = 1000; + u32 ctrl; + + dwmci_writel(host, DWMCI_CTRL, value); + + while (timeout--) { + ctrl = dwmci_readl(host, DWMCI_CTRL); + if (!(ctrl & DWMCI_RESET_ALL)) + return 1; + } + return 0; +} + +static void dwmci_set_idma_desc(struct dwmci_idmac *idmac, + u32 desc0, u32 desc1, u32 desc2) +{ + struct dwmci_idmac *desc = idmac; + + desc->flags = desc0; + desc->cnt = desc1; + desc->addr = desc2; + desc->next_addr = (unsigned int)desc + sizeof(struct dwmci_idmac); +} + +static void dwmci_prepare_data(struct dwmci_host *host, + struct mmc_data *data) +{ + unsigned long ctrl; + unsigned int i = 0, flags, cnt, blk_cnt; + ulong data_start, data_end, start_addr; + ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac, data->blocks); + + + blk_cnt = data->blocks; + + dwmci_wait_reset(host, DWMCI_CTRL_FIFO_RESET); + + data_start = (ulong)cur_idmac; + dwmci_writel(host, DWMCI_DBADDR, (unsigned int)cur_idmac); + + if (data->flags == MMC_DATA_READ) + start_addr = (unsigned int)data->dest; + else + start_addr = (unsigned int)data->src; + + do { + flags = DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH ; + flags |= (i == 0) ? DWMCI_IDMAC_FS : 0; + if (blk_cnt <= 8) { + flags |= DWMCI_IDMAC_LD; + cnt = data->blocksize * blk_cnt; + } else + cnt = data->blocksize * 8; + + dwmci_set_idma_desc(cur_idmac, flags, cnt, + start_addr + (i * PAGE_SIZE)); + + if(blk_cnt < 8) + break; + blk_cnt -= 8; + cur_idmac++; + i++; + } while(1); + + data_end = (ulong)cur_idmac; + flush_dcache_range(data_start, data_end + ARCH_DMA_MINALIGN); + + ctrl = dwmci_readl(host, DWMCI_CTRL); + ctrl |= DWMCI_IDMAC_EN | DWMCI_DMA_EN; + dwmci_writel(host, DWMCI_CTRL, ctrl); + + ctrl = dwmci_readl(host, DWMCI_BMOD); + ctrl |= DWMCI_BMOD_IDMAC_FB | DWMCI_BMOD_IDMAC_EN; + dwmci_writel(host, DWMCI_BMOD, ctrl); + + dwmci_writel(host, DWMCI_BLKSIZ, data->blocksize); + dwmci_writel(host, DWMCI_BYTCNT, data->blocksize * data->blocks); +} + +static int dwmci_set_transfer_mode(struct dwmci_host *host, + struct mmc_data *data) +{ + unsigned long mode; + + mode = DWMCI_CMD_DATA_EXP; + if (data->flags & MMC_DATA_WRITE) + mode |= DWMCI_CMD_RW; + + return mode; +} + +static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct dwmci_host *host = (struct dwmci_host *)mmc->priv; + int flags = 0, i; + unsigned int timeout = 100000; + u32 retry = 10000; + u32 mask, ctrl; + + while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) { + if (timeout == 0) { + printf("Timeout on data busy\n"); + return TIMEOUT; + } + timeout--; + } + + dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL); + + if (data) + dwmci_prepare_data(host, data); + + + dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg); + + if (data) + flags = dwmci_set_transfer_mode(host, data); + + if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY)) + return -1; + + if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION) + flags |= DWMCI_CMD_ABORT_STOP; + else + flags |= DWMCI_CMD_PRV_DAT_WAIT; + + if (cmd->resp_type & MMC_RSP_PRESENT) { + flags |= DWMCI_CMD_RESP_EXP; + if (cmd->resp_type & MMC_RSP_136) + flags |= DWMCI_CMD_RESP_LENGTH; + } + + if (cmd->resp_type & MMC_RSP_CRC) + flags |= DWMCI_CMD_CHECK_CRC; + + flags |= (cmd->cmdidx | DWMCI_CMD_START | DWMCI_CMD_USE_HOLD_REG); + + debug("Sending CMD%d\n",cmd->cmdidx); + + dwmci_writel(host, DWMCI_CMD, flags); + + for (i = 0; i < retry; i++) { + mask = dwmci_readl(host, DWMCI_RINTSTS); + if (mask & DWMCI_INTMSK_CDONE) { + if (!data) + dwmci_writel(host, DWMCI_RINTSTS, mask); + break; + } + } + + if (i == retry) + return TIMEOUT; + + if (mask & DWMCI_INTMSK_RTO) { + debug("Response Timeout..\n"); + return TIMEOUT; + } else if (mask & DWMCI_INTMSK_RE) { + debug("Response Error..\n"); + return -1; + } + + + if (cmd->resp_type & MMC_RSP_PRESENT) { + if (cmd->resp_type & MMC_RSP_136) { + cmd->response[0] = dwmci_readl(host, DWMCI_RESP3); + cmd->response[1] = dwmci_readl(host, DWMCI_RESP2); + cmd->response[2] = dwmci_readl(host, DWMCI_RESP1); + cmd->response[3] = dwmci_readl(host, DWMCI_RESP0); + } else { + cmd->response[0] = dwmci_readl(host, DWMCI_RESP0); + } + } + + if (data) { + do { + mask = dwmci_readl(host, DWMCI_RINTSTS); + if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) { + debug("DATA ERROR!\n"); + return -1; + } + } while (!(mask & DWMCI_INTMSK_DTO)); + + dwmci_writel(host, DWMCI_RINTSTS, mask); + + ctrl = dwmci_readl(host, DWMCI_CTRL); + ctrl &= ~(DWMCI_DMA_EN); + dwmci_writel(host, DWMCI_CTRL, ctrl); + } + + udelay(100); + + return 0; +} + +static int dwmci_setup_bus(struct dwmci_host *host, u32 freq) +{ + u32 div, status; + int timeout = 10000; + unsigned long sclk; + + if (freq == host->clock) + return 0; + + /* + * If host->mmc_clk didn't define, + * then assume that host->bus_hz is source clock value. + * host->bus_hz should be set from user. + */ + if (host->mmc_clk) + sclk = host->mmc_clk(host->dev_index); + else if (host->bus_hz) + sclk = host->bus_hz; + else { + printf("Didn't get source clock value..\n"); + return -EINVAL; + } + + div = DIV_ROUND_UP(sclk, 2 * freq); + + dwmci_writel(host, DWMCI_CLKENA, 0); + dwmci_writel(host, DWMCI_CLKSRC, 0); + + dwmci_writel(host, DWMCI_CLKDIV, div); + dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT | + DWMCI_CMD_UPD_CLK | DWMCI_CMD_START); + + do { + status = dwmci_readl(host, DWMCI_CMD); + if (timeout-- < 0) { + printf("TIMEOUT error!!\n"); + return -ETIMEDOUT; + } + } while (status & DWMCI_CMD_START); + + dwmci_writel(host, DWMCI_CLKENA, DWMCI_CLKEN_ENABLE | + DWMCI_CLKEN_LOW_PWR); + + dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT | + DWMCI_CMD_UPD_CLK | DWMCI_CMD_START); + + timeout = 10000; + do { + status = dwmci_readl(host, DWMCI_CMD); + if (timeout-- < 0) { + printf("TIMEOUT error!!\n"); + return -ETIMEDOUT; + } + } while (status & DWMCI_CMD_START); + + host->clock = freq; + + return 0; +} + +static void dwmci_set_ios(struct mmc *mmc) +{ + struct dwmci_host *host = (struct dwmci_host *)mmc->priv; + u32 ctype; + + debug("Buswidth = %d, clock: %d\n",mmc->bus_width, mmc->clock); + + dwmci_setup_bus(host, mmc->clock); + switch (mmc->bus_width) { + case 8: + ctype = DWMCI_CTYPE_8BIT; + break; + case 4: + ctype = DWMCI_CTYPE_4BIT; + break; + default: + ctype = DWMCI_CTYPE_1BIT; + break; + } + + dwmci_writel(host, DWMCI_CTYPE, ctype); + + if (host->clksel) + host->clksel(host); +} + +static int dwmci_init(struct mmc *mmc) +{ + struct dwmci_host *host = (struct dwmci_host *)mmc->priv; + u32 fifo_size, fifoth_val; + + dwmci_writel(host, DWMCI_PWREN, 1); + + if (!dwmci_wait_reset(host, DWMCI_RESET_ALL)) { + debug("%s[%d] Fail-reset!!\n",__func__,__LINE__); + return -1; + } + + dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF); + dwmci_writel(host, DWMCI_INTMASK, 0); + + dwmci_writel(host, DWMCI_TMOUT, 0xFFFFFFFF); + + dwmci_writel(host, DWMCI_IDINTEN, 0); + dwmci_writel(host, DWMCI_BMOD, 1); + + fifo_size = dwmci_readl(host, DWMCI_FIFOTH); + if (host->fifoth_val) + fifoth_val = host->fifoth_val; + else + fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) | + TX_WMARK(fifo_size/2); + dwmci_writel(host, DWMCI_FIFOTH, fifoth_val); + + dwmci_writel(host, DWMCI_CLKENA, 0); + dwmci_writel(host, DWMCI_CLKSRC, 0); + + return 0; +} + +int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk) +{ + struct mmc *mmc; + int err = 0; + + mmc = malloc(sizeof(struct mmc)); + if (!mmc) { + printf("mmc malloc fail!\n"); + return -1; + } + + mmc->priv = host; + host->mmc = mmc; + + sprintf(mmc->name, "%s", host->name); + mmc->send_cmd = dwmci_send_cmd; + mmc->set_ios = dwmci_set_ios; + mmc->init = dwmci_init; + mmc->f_min = min_clk; + mmc->f_max = max_clk; + + mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + + mmc->host_caps = host->caps; + + if (host->buswidth == 8) { + mmc->host_caps |= MMC_MODE_8BIT; + mmc->host_caps &= ~MMC_MODE_4BIT; + } else { + mmc->host_caps |= MMC_MODE_4BIT; + mmc->host_caps &= ~MMC_MODE_8BIT; + } + mmc->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_HC; + + err = mmc_register(mmc); + + return err; +} diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index aa6a9f13ea..e93e38ac43 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -68,7 +68,7 @@ struct fsl_esdhc { }; /* Return the XFERTYP flags for a given command and data packet */ -uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data) +static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data) { uint xfertyp = 0; diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index 4968c5e491..67b2dbe8d4 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -87,6 +87,11 @@ static void mci_set_mode(struct mmc *mmc, u32 hz, u32 blklen) | MMCI_BF(BLKLEN, blklen) | MMCI_BIT(RDPROOF) | MMCI_BIT(WRPROOF)), &mci->mr); + /* + * On some new platforms BLKLEN in mci->mr is ignored. + * Should use the BLKLEN in the block register. + */ + writel(MMCI_BF(BLKLEN, blklen), &mci->blkr); initialized = 1; } @@ -183,6 +188,12 @@ mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) /* Figure out the transfer arguments */ cmdr = mci_encode_cmd(cmd, data, &error_flags); + /* For multi blocks read/write, set the block register */ + if ((cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK) + || (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK)) + writel(data->blocks | MMCI_BF(BLKLEN, mmc->read_bl_len), + &mci->blkr); + /* Send the command */ writel(cmd->cmdarg, &mci->argr); writel(cmdr, &mci->cmdr); @@ -310,8 +321,8 @@ static int mci_init(struct mmc *mmc) writel(MMCI_BIT(MCIEN), &mci->cr); /* enable mci */ writel(MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr); /* select port */ - /* Initial Time-outs */ - writel(0x5f, &mci->dtor); + /* This delay can be optimized, but stick with max value */ + writel(0x7f, &mci->dtor); /* Disable Interrupts */ writel(~0UL, &mci->idr); diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index a60cfe1cb0..5ffd8c59e6 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -47,104 +47,14 @@ int __board_mmc_getcd(struct mmc *mmc) { int board_mmc_getcd(struct mmc *mmc)__attribute__((weak, alias("__board_mmc_getcd"))); -#ifdef CONFIG_MMC_BOUNCE_BUFFER -static int mmc_bounce_need_bounce(struct mmc_data *orig) -{ - ulong addr, len; - - if (orig->flags & MMC_DATA_READ) - addr = (ulong)orig->dest; - else - addr = (ulong)orig->src; - - if (addr % ARCH_DMA_MINALIGN) { - debug("MMC: Unaligned data destination address %08lx!\n", addr); - return 1; - } - - len = (ulong)(orig->blocksize * orig->blocks); - if (len % ARCH_DMA_MINALIGN) { - debug("MMC: Unaligned data destination length %08lx!\n", len); - return 1; - } - - return 0; -} - -static int mmc_bounce_buffer_start(struct mmc_data *backup, - struct mmc_data *orig) -{ - ulong origlen, len; - void *buffer; - - if (!orig) - return 0; - - if (!mmc_bounce_need_bounce(orig)) - return 0; - - memcpy(backup, orig, sizeof(struct mmc_data)); - - origlen = orig->blocksize * orig->blocks; - len = roundup(origlen, ARCH_DMA_MINALIGN); - buffer = memalign(ARCH_DMA_MINALIGN, len); - if (!buffer) { - puts("MMC: Error allocating MMC bounce buffer!\n"); - return 1; - } - - if (orig->flags & MMC_DATA_READ) { - orig->dest = buffer; - } else { - memcpy(buffer, orig->src, origlen); - orig->src = buffer; - } - - return 0; -} - -static void mmc_bounce_buffer_stop(struct mmc_data *backup, - struct mmc_data *orig) -{ - ulong len; - - if (!orig) - return; - - if (!mmc_bounce_need_bounce(backup)) - return; - - if (backup->flags & MMC_DATA_READ) { - len = backup->blocksize * backup->blocks; - memcpy(backup->dest, orig->dest, len); - free(orig->dest); - orig->dest = backup->dest; - } else { - free((void *)orig->src); - orig->src = backup->src; - } - - return; - -} -#else -static inline int mmc_bounce_buffer_start(struct mmc_data *backup, - struct mmc_data *orig) { return 0; } -static inline void mmc_bounce_buffer_stop(struct mmc_data *backup, - struct mmc_data *orig) { } -#endif - -int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) +static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) { struct mmc_data backup; int ret; memset(&backup, 0, sizeof(backup)); - ret = mmc_bounce_buffer_start(&backup, data); - if (ret) - return ret; - #ifdef CONFIG_MMC_TRACE int i; u8 *ptr; @@ -196,11 +106,10 @@ int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) #else ret = mmc->send_cmd(mmc, cmd, data); #endif - mmc_bounce_buffer_stop(&backup, data); return ret; } -int mmc_send_status(struct mmc *mmc, int timeout) +static int mmc_send_status(struct mmc *mmc, int timeout) { struct mmc_cmd cmd; int err, retries = 5; @@ -244,7 +153,7 @@ int mmc_send_status(struct mmc *mmc, int timeout) return 0; } -int mmc_set_blocklen(struct mmc *mmc, int len) +static int mmc_set_blocklen(struct mmc *mmc, int len) { struct mmc_cmd cmd; @@ -437,7 +346,8 @@ mmc_bwrite(int dev_num, ulong start, lbaint_t blkcnt, const void*src) return blkcnt; } -int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt) +static int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, + lbaint_t blkcnt) { struct mmc_cmd cmd; struct mmc_data data; @@ -507,7 +417,7 @@ static ulong mmc_bread(int dev_num, ulong start, lbaint_t blkcnt, void *dst) return blkcnt; } -int mmc_go_idle(struct mmc* mmc) +static int mmc_go_idle(struct mmc *mmc) { struct mmc_cmd cmd; int err; @@ -528,8 +438,7 @@ int mmc_go_idle(struct mmc* mmc) return 0; } -int -sd_send_op_cond(struct mmc *mmc) +static int sd_send_op_cond(struct mmc *mmc) { int timeout = 1000; int err; @@ -594,7 +503,7 @@ sd_send_op_cond(struct mmc *mmc) return 0; } -int mmc_send_op_cond(struct mmc *mmc) +static int mmc_send_op_cond(struct mmc *mmc) { int timeout = 10000; struct mmc_cmd cmd; @@ -658,7 +567,7 @@ int mmc_send_op_cond(struct mmc *mmc) } -int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd) +static int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd) { struct mmc_cmd cmd; struct mmc_data data; @@ -680,7 +589,7 @@ int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd) } -int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value) +static int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value) { struct mmc_cmd cmd; int timeout = 1000; @@ -702,7 +611,7 @@ int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value) } -int mmc_change_freq(struct mmc *mmc) +static int mmc_change_freq(struct mmc *mmc) { ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, 512); char cardtype; @@ -772,7 +681,7 @@ int mmc_getcd(struct mmc *mmc) return cd; } -int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp) +static int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp) { struct mmc_cmd cmd; struct mmc_data data; @@ -793,7 +702,7 @@ int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp) } -int sd_change_freq(struct mmc *mmc) +static int sd_change_freq(struct mmc *mmc) { int err; struct mmc_cmd cmd; @@ -932,7 +841,7 @@ static const int multipliers[] = { 80, }; -void mmc_set_ios(struct mmc *mmc) +static void mmc_set_ios(struct mmc *mmc) { mmc->set_ios(mmc); } @@ -950,14 +859,14 @@ void mmc_set_clock(struct mmc *mmc, uint clock) mmc_set_ios(mmc); } -void mmc_set_bus_width(struct mmc *mmc, uint width) +static void mmc_set_bus_width(struct mmc *mmc, uint width) { mmc->bus_width = width; mmc_set_ios(mmc); } -int mmc_startup(struct mmc *mmc) +static int mmc_startup(struct mmc *mmc) { int err, width; uint mult, freq; @@ -1105,7 +1014,7 @@ int mmc_startup(struct mmc *mmc) if (!IS_SD(mmc) && (mmc->version >= MMC_VERSION_4)) { /* check ext_csd version and capacity */ err = mmc_send_ext_csd(mmc, ext_csd); - if (!err & (ext_csd[EXT_CSD_REV] >= 2)) { + if (!err && (ext_csd[EXT_CSD_REV] >= 2)) { /* * According to the JEDEC Standard, the value of * ext_csd's capacity is valid if the value is more @@ -1240,7 +1149,7 @@ int mmc_startup(struct mmc *mmc) return 0; } -int mmc_send_if_cond(struct mmc *mmc) +static int mmc_send_if_cond(struct mmc *mmc) { struct mmc_cmd cmd; int err; diff --git a/drivers/mmc/mmc_spi.c b/drivers/mmc/mmc_spi.c index de43a85355..11ba532b0c 100644 --- a/drivers/mmc/mmc_spi.c +++ b/drivers/mmc/mmc_spi.c @@ -176,8 +176,8 @@ static int mmc_spi_request(struct mmc *mmc, struct mmc_cmd *cmd, u8 r1; int i; int ret = 0; - debug("%s:cmd%d %x %x %x\n", __func__, - cmd->cmdidx, cmd->resp_type, cmd->cmdarg, cmd->flags); + debug("%s:cmd%d %x %x\n", __func__, + cmd->cmdidx, cmd->resp_type, cmd->cmdarg); spi_claim_bus(spi); spi_cs_activate(spi); r1 = mmc_spi_sendcmd(mmc, cmd->cmdidx, cmd->cmdarg); diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index c80b41b192..109acbf623 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -42,6 +42,7 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/sys_proto.h> #include <asm/arch/dma.h> +#include <bouncebuf.h> struct mxsmmc_priv { int id; @@ -95,28 +96,33 @@ static int mxsmmc_send_cmd_pio(struct mxsmmc_priv *priv, struct mmc_data *data) static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data) { uint32_t data_count = data->blocksize * data->blocks; - uint32_t cache_data_count; + uint32_t cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN); int dmach; struct mxs_dma_desc *desc = priv->desc; + void *addr, *backup; + uint8_t flags; memset(desc, 0, sizeof(struct mxs_dma_desc)); desc->address = (dma_addr_t)desc; - if (data_count % ARCH_DMA_MINALIGN) - cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN); - else - cache_data_count = data_count; - if (data->flags & MMC_DATA_READ) { priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE; - priv->desc->cmd.address = (dma_addr_t)data->dest; + addr = data->dest; + flags = GEN_BB_WRITE; } else { priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ; - priv->desc->cmd.address = (dma_addr_t)data->src; + addr = (void *)data->src; + flags = GEN_BB_READ; + } + + bounce_buffer_start(&addr, data_count, &backup, flags); + + priv->desc->cmd.address = (dma_addr_t)addr; + if (data->flags & MMC_DATA_WRITE) { /* Flush data to DRAM so DMA can pick them up */ - flush_dcache_range((uint32_t)priv->desc->cmd.address, - (uint32_t)(priv->desc->cmd.address + cache_data_count)); + flush_dcache_range((uint32_t)addr, + (uint32_t)(addr) + cache_data_count); } /* Invalidate the area, so no writeback into the RAM races with DMA */ @@ -128,15 +134,19 @@ static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data) dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id; mxs_dma_desc_append(dmach, priv->desc); - if (mxs_dma_go(dmach)) + if (mxs_dma_go(dmach)) { + bounce_buffer_stop(&addr, data_count, &backup, flags); return COMM_ERR; + } /* The data arrived into DRAM, invalidate cache over them */ if (data->flags & MMC_DATA_READ) { - invalidate_dcache_range((uint32_t)priv->desc->cmd.address, - (uint32_t)(priv->desc->cmd.address + cache_data_count)); + invalidate_dcache_range((uint32_t)addr, + (uint32_t)(addr) + cache_data_count); } + bounce_buffer_stop(&addr, data_count, &backup, flags); + return 0; } diff --git a/drivers/mmc/pxa_mmc.c b/drivers/mmc/pxa_mmc.c deleted file mode 100644 index 80c4445034..0000000000 --- a/drivers/mmc/pxa_mmc.c +++ /dev/null @@ -1,643 +0,0 @@ -/* - * (C) Copyright 2003 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <common.h> -#include <mmc.h> -#include <asm/errno.h> -#include <asm/arch/hardware.h> -#include <part.h> -#include <asm/io.h> - -#include "pxa_mmc.h" - -extern int fat_register_device(block_dev_desc_t * dev_desc, int part_no); - -static block_dev_desc_t mmc_dev; - -block_dev_desc_t *mmc_get_dev(int dev) -{ - return ((block_dev_desc_t *) & mmc_dev); -} - -/* - * FIXME needs to read cid and csd info to determine block size - * and other parameters - */ -static uchar mmc_buf[MMC_BLOCK_SIZE]; -static uchar spec_ver; -static int mmc_ready = 0; -static int wide = 0; - -static uint32_t * -/****************************************************/ -mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat) -/****************************************************/ -{ - static uint32_t resp[4], a, b, c; - uint32_t status; - int i; - - debug("mmc_cmd %u 0x%04x 0x%04x 0x%04x\n", cmd, argh, argl, - cmdat | wide); - writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL); - writel(~MMC_I_MASK_CLK_IS_OFF, MMC_I_MASK); - while (!(readl(MMC_I_REG) & MMC_I_REG_CLK_IS_OFF)) - ; - writel(cmd, MMC_CMD); - writel(argh, MMC_ARGH); - writel(argl, MMC_ARGL); - writel(cmdat | wide, MMC_CMDAT); - writel(~MMC_I_MASK_END_CMD_RES, MMC_I_MASK); - writel(MMC_STRPCL_START_CLK, MMC_STRPCL); - while (!(readl(MMC_I_REG) & MMC_I_REG_END_CMD_RES)) - ; - - status = readl(MMC_STAT); - debug("MMC status 0x%08x\n", status); - if (status & MMC_STAT_TIME_OUT_RESPONSE) { - return 0; - } - - /* Linux says: - * Did I mention this is Sick. We always need to - * discard the upper 8 bits of the first 16-bit word. - */ - a = (readl(MMC_RES) & 0xffff); - for (i = 0; i < 4; i++) { - b = (readl(MMC_RES) & 0xffff); - c = (readl(MMC_RES) & 0xffff); - resp[i] = (a << 24) | (b << 8) | (c >> 8); - a = c; - debug("MMC resp[%d] = %#08x\n", i, resp[i]); - } - - return resp; -} - -int -/****************************************************/ -mmc_block_read(uchar * dst, uint32_t src, int len) -/****************************************************/ -{ - ushort argh, argl; - ulong status; - - if (len == 0) { - return 0; - } - - debug("mmc_block_rd dst %p src %08x len %d\n", dst, src, len); - - argh = len >> 16; - argl = len & 0xffff; - - /* set block len */ - mmc_cmd(MMC_CMD_SET_BLOCKLEN, argh, argl, MMC_CMDAT_R1); - - /* send read command */ - argh = src >> 16; - argl = src & 0xffff; - writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL); - writel(0xffff, MMC_RDTO); - writel(1, MMC_NOB); - writel(len, MMC_BLKLEN); - mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK, argh, argl, - MMC_CMDAT_R1 | MMC_CMDAT_READ | MMC_CMDAT_BLOCK | - MMC_CMDAT_DATA_EN); - - writel(~MMC_I_MASK_RXFIFO_RD_REQ, MMC_I_MASK); - while (len) { - if (readl(MMC_I_REG) & MMC_I_REG_RXFIFO_RD_REQ) { -#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) - int i; - for (i = min(len, 32); i; i--) { - *dst++ = readb(MMC_RXFIFO); - len--; - } -#else - *dst++ = readb(MMC_RXFIFO); - len--; -#endif - } - status = readl(MMC_STAT); - if (status & MMC_STAT_ERRORS) { - printf("MMC_STAT error %lx\n", status); - return -1; - } - } - writel(~MMC_I_MASK_DATA_TRAN_DONE, MMC_I_MASK); - while (!(readl(MMC_I_REG) & MMC_I_REG_DATA_TRAN_DONE)) - ; - status = readl(MMC_STAT); - if (status & MMC_STAT_ERRORS) { - printf("MMC_STAT error %lx\n", status); - return -1; - } - return 0; -} - -int -/****************************************************/ -mmc_block_write(ulong dst, uchar * src, int len) -/****************************************************/ -{ - ushort argh, argl; - ulong status; - - if (len == 0) { - return 0; - } - - debug("mmc_block_wr dst %lx src %lx len %d\n", dst, (ulong) src, len); - - argh = len >> 16; - argl = len & 0xffff; - - /* set block len */ - mmc_cmd(MMC_CMD_SET_BLOCKLEN, argh, argl, MMC_CMDAT_R1); - - /* send write command */ - argh = dst >> 16; - argl = dst & 0xffff; - writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL); - writel(1, MMC_NOB); - writel(len, MMC_BLKLEN); - mmc_cmd(MMC_CMD_WRITE_SINGLE_BLOCK, argh, argl, - MMC_CMDAT_R1 | MMC_CMDAT_WRITE | MMC_CMDAT_BLOCK | - MMC_CMDAT_DATA_EN); - - writel(~MMC_I_MASK_TXFIFO_WR_REQ, MMC_I_MASK); - while (len) { - if (readl(MMC_I_REG) & MMC_I_REG_TXFIFO_WR_REQ) { - int i, bytes = min(32, len); - - for (i = 0; i < bytes; i++) { - writel(*src++, MMC_TXFIFO); - } - if (bytes < 32) { - writel(MMC_PRTBUF_BUF_PART_FULL, MMC_PRTBUF); - } - len -= bytes; - } - status = readl(MMC_STAT); - if (status & MMC_STAT_ERRORS) { - printf("MMC_STAT error %lx\n", status); - return -1; - } - } - writel(~MMC_I_MASK_DATA_TRAN_DONE, MMC_I_MASK); - while (!(readl(MMC_I_REG) & MMC_I_REG_DATA_TRAN_DONE)) - ; - writel(~MMC_I_MASK_PRG_DONE, MMC_I_MASK); - while (!(readl(MMC_I_REG) & MMC_I_REG_PRG_DONE)) - ; - status = readl(MMC_STAT); - if (status & MMC_STAT_ERRORS) { - printf("MMC_STAT error %lx\n", status); - return -1; - } - return 0; -} - -int -/****************************************************/ -pxa_mmc_read(long src, uchar * dst, int size) -/****************************************************/ -{ - ulong end, part_start, part_end, part_len, aligned_start, aligned_end; - ulong mmc_block_size, mmc_block_address; - - if (size == 0) { - return 0; - } - - if (!mmc_ready) { - printf("Please initial the MMC first\n"); - return -1; - } - - mmc_block_size = MMC_BLOCK_SIZE; - mmc_block_address = ~(mmc_block_size - 1); - - src -= CONFIG_SYS_MMC_BASE; - end = src + size; - part_start = ~mmc_block_address & src; - part_end = ~mmc_block_address & end; - aligned_start = mmc_block_address & src; - aligned_end = mmc_block_address & end; - - /* all block aligned accesses */ - debug - ("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, (ulong) dst, end, part_start, part_end, aligned_start, - aligned_end); - if (part_start) { - part_len = mmc_block_size - part_start; - debug - ("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, (ulong) dst, end, part_start, part_end, aligned_start, - aligned_end); - if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < - 0) { - return -1; - } - memcpy(dst, mmc_buf + part_start, part_len); - dst += part_len; - src += part_len; - } - debug - ("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, (ulong) dst, end, part_start, part_end, aligned_start, - aligned_end); - for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) { - debug - ("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, (ulong) dst, end, part_start, part_end, aligned_start, - aligned_end); - if ((mmc_block_read((uchar *) (dst), src, mmc_block_size)) < 0) { - return -1; - } - } - debug - ("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, (ulong) dst, end, part_start, part_end, aligned_start, - aligned_end); - if (part_end && src < end) { - debug - ("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, (ulong) dst, end, part_start, part_end, aligned_start, - aligned_end); - if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) { - return -1; - } - memcpy(dst, mmc_buf, part_end); - } - return 0; -} - -int -/****************************************************/ -pxa_mmc_write(uchar * src, uint32_t dst, int size) -/****************************************************/ -{ - ulong end, part_start, part_end, part_len, aligned_start, aligned_end; - ulong mmc_block_size, mmc_block_address; - - if (size == 0) { - return 0; - } - - if (!mmc_ready) { - printf("Please initial the MMC first\n"); - return -1; - } - - mmc_block_size = MMC_BLOCK_SIZE; - mmc_block_address = ~(mmc_block_size - 1); - - dst -= CONFIG_SYS_MMC_BASE; - end = dst + size; - part_start = ~mmc_block_address & dst; - part_end = ~mmc_block_address & end; - aligned_start = mmc_block_address & dst; - aligned_end = mmc_block_address & end; - - /* all block aligned accesses */ - debug - ("src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, dst, end, part_start, part_end, aligned_start, - aligned_end); - if (part_start) { - part_len = mmc_block_size - part_start; - debug - ("ps src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, dst, end, part_start, part_end, aligned_start, - aligned_end); - if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < - 0) { - return -1; - } - memcpy(mmc_buf + part_start, src, part_len); - if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) < - 0) { - return -1; - } - dst += part_len; - src += part_len; - } - debug - ("src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, dst, end, part_start, part_end, aligned_start, - aligned_end); - for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) { - debug - ("al src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, dst, end, part_start, part_end, aligned_start, - aligned_end); - if ((mmc_block_write(dst, (uchar *) src, mmc_block_size)) < 0) { - return -1; - } - } - debug - ("src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, dst, end, part_start, part_end, aligned_start, - aligned_end); - if (part_end && dst < end) { - debug - ("pe src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n", - src, dst, end, part_start, part_end, aligned_start, - aligned_end); - if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) { - return -1; - } - memcpy(mmc_buf, src, part_end); - if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) { - return -1; - } - } - return 0; -} - -static ulong -/****************************************************/ -mmc_bread(int dev_num, ulong blknr, lbaint_t blkcnt, void *dst) -/****************************************************/ -{ - int mmc_block_size = MMC_BLOCK_SIZE; - ulong src = blknr * mmc_block_size + CONFIG_SYS_MMC_BASE; - - pxa_mmc_read(src, (uchar *) dst, blkcnt * mmc_block_size); - return blkcnt; -} - -#ifdef __GNUC__ -#define likely(x) __builtin_expect(!!(x), 1) -#define unlikely(x) __builtin_expect(!!(x), 0) -#else -#define likely(x) (x) -#define unlikely(x) (x) -#endif - -#define UNSTUFF_BITS(resp,start,size) \ - ({ \ - const int __size = size; \ - const uint32_t __mask = (__size < 32 ? 1 << __size : 0) - 1; \ - const int32_t __off = 3 - ((start) / 32); \ - const int32_t __shft = (start) & 31; \ - uint32_t __res; \ - \ - __res = resp[__off] >> __shft; \ - if (__size + __shft > 32) \ - __res |= resp[__off-1] << ((32 - __shft) % 32); \ - __res & __mask; \ - }) - -/* - * Given the decoded CSD structure, decode the raw CID to our CID structure. - */ -static void mmc_decode_cid(uint32_t * resp) -{ - if (IF_TYPE_SD == mmc_dev.if_type) { - /* - * SD doesn't currently have a version field so we will - * have to assume we can parse this. - */ - sprintf((char *)mmc_dev.vendor, - "Man %02x OEM %c%c \"%c%c%c%c%c\" Date %02u/%04u", - UNSTUFF_BITS(resp, 120, 8), UNSTUFF_BITS(resp, 112, 8), - UNSTUFF_BITS(resp, 104, 8), UNSTUFF_BITS(resp, 96, 8), - UNSTUFF_BITS(resp, 88, 8), UNSTUFF_BITS(resp, 80, 8), - UNSTUFF_BITS(resp, 72, 8), UNSTUFF_BITS(resp, 64, 8), - UNSTUFF_BITS(resp, 8, 4), UNSTUFF_BITS(resp, 12, - 8) + 2000); - sprintf((char *)mmc_dev.revision, "%d.%d", - UNSTUFF_BITS(resp, 60, 4), UNSTUFF_BITS(resp, 56, 4)); - sprintf((char *)mmc_dev.product, "%u", - UNSTUFF_BITS(resp, 24, 32)); - } else { - /* - * The selection of the format here is based upon published - * specs from sandisk and from what people have reported. - */ - switch (spec_ver) { - case 0: /* MMC v1.0 - v1.2 */ - case 1: /* MMC v1.4 */ - sprintf((char *)mmc_dev.vendor, - "Man %02x%02x%02x \"%c%c%c%c%c%c%c\" Date %02u/%04u", - UNSTUFF_BITS(resp, 120, 8), UNSTUFF_BITS(resp, - 112, - 8), - UNSTUFF_BITS(resp, 104, 8), UNSTUFF_BITS(resp, - 96, 8), - UNSTUFF_BITS(resp, 88, 8), UNSTUFF_BITS(resp, - 80, 8), - UNSTUFF_BITS(resp, 72, 8), UNSTUFF_BITS(resp, - 64, 8), - UNSTUFF_BITS(resp, 56, 8), UNSTUFF_BITS(resp, - 48, 8), - UNSTUFF_BITS(resp, 12, 4), UNSTUFF_BITS(resp, 8, - 4) + - 1997); - sprintf((char *)mmc_dev.revision, "%d.%d", - UNSTUFF_BITS(resp, 44, 4), UNSTUFF_BITS(resp, - 40, 4)); - sprintf((char *)mmc_dev.product, "%u", - UNSTUFF_BITS(resp, 16, 24)); - break; - - case 2: /* MMC v2.0 - v2.2 */ - case 3: /* MMC v3.1 - v3.3 */ - case 4: /* MMC v4 */ - sprintf((char *)mmc_dev.vendor, - "Man %02x OEM %04x \"%c%c%c%c%c%c\" Date %02u/%04u", - UNSTUFF_BITS(resp, 120, 8), UNSTUFF_BITS(resp, - 104, - 16), - UNSTUFF_BITS(resp, 96, 8), UNSTUFF_BITS(resp, - 88, 8), - UNSTUFF_BITS(resp, 80, 8), UNSTUFF_BITS(resp, - 72, 8), - UNSTUFF_BITS(resp, 64, 8), UNSTUFF_BITS(resp, - 56, 8), - UNSTUFF_BITS(resp, 12, 4), UNSTUFF_BITS(resp, 8, - 4) + - 1997); - sprintf((char *)mmc_dev.product, "%u", - UNSTUFF_BITS(resp, 16, 32)); - sprintf((char *)mmc_dev.revision, "N/A"); - break; - - default: - printf("MMC card has unknown MMCA version %d\n", - spec_ver); - break; - } - } - printf("%s card.\nVendor: %s\nProduct: %s\nRevision: %s\n", - (IF_TYPE_SD == mmc_dev.if_type) ? "SD" : "MMC", mmc_dev.vendor, - mmc_dev.product, mmc_dev.revision); -} - -/* - * Given a 128-bit response, decode to our card CSD structure. - */ -static void mmc_decode_csd(uint32_t * resp) -{ - unsigned int mult, csd_struct; - - if (IF_TYPE_SD == mmc_dev.if_type) { - csd_struct = UNSTUFF_BITS(resp, 126, 2); - if (csd_struct != 0) { - printf("SD: unrecognised CSD structure version %d\n", - csd_struct); - return; - } - } else { - /* - * We only understand CSD structure v1.1 and v1.2. - * v1.2 has extra information in bits 15, 11 and 10. - */ - csd_struct = UNSTUFF_BITS(resp, 126, 2); - if (csd_struct != 1 && csd_struct != 2) { - printf("MMC: unrecognised CSD structure version %d\n", - csd_struct); - return; - } - - spec_ver = UNSTUFF_BITS(resp, 122, 4); - mmc_dev.if_type = IF_TYPE_MMC; - } - - mult = 1 << (UNSTUFF_BITS(resp, 47, 3) + 2); - mmc_dev.lba = (1 + UNSTUFF_BITS(resp, 62, 12)) * mult; - mmc_dev.blksz = 1 << UNSTUFF_BITS(resp, 80, 4); - - /* FIXME: The following just makes assumes that's the partition type -- should really read it */ - mmc_dev.part_type = PART_TYPE_DOS; - mmc_dev.dev = 0; - mmc_dev.lun = 0; - mmc_dev.type = DEV_TYPE_HARDDISK; - mmc_dev.removable = 0; - mmc_dev.block_read = mmc_bread; - - printf("Detected: %lu blocks of %lu bytes (%luMB) ", - mmc_dev.lba, - mmc_dev.blksz, - mmc_dev.lba * mmc_dev.blksz / (1024 * 1024)); -} - -int -/****************************************************/ -mmc_legacy_init(int verbose) -/****************************************************/ -{ - int retries, rc = -ENODEV; - uint32_t cid_resp[4]; - uint32_t *resp; - uint16_t rca = 0; - - /* Reset device interface type */ - mmc_dev.if_type = IF_TYPE_UNKNOWN; - -#ifdef CONFIG_CPU_MONAHANS /* pxa3xx */ - writel(readl(CKENA) | CKENA_12_MMC0 | CKENA_13_MMC1, CKENA); -#else /* pxa2xx */ - writel(readl(CKEN) | CKEN12_MMC, CKEN); /* enable MMC unit clock */ -#endif - writel(MMC_CLKRT_0_3125MHZ, MMC_CLKRT); - writel(MMC_RES_TO_MAX, MMC_RESTO); - writel(MMC_SPI_DISABLE, MMC_SPI); - - /* reset */ - mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, 0, MMC_CMDAT_INIT | MMC_CMDAT_R0); - udelay(200000); - retries = 3; - while (retries--) { - resp = mmc_cmd(MMC_CMD_APP_CMD, 0, 0, MMC_CMDAT_R1); - if (!(resp[0] & 0x00000020)) { /* Card does not support APP_CMD */ - debug("Card does not support APP_CMD\n"); - break; - } - - /* Select 3.2-3.3V and 3.3-3.4V */ - resp = mmc_cmd(SD_CMD_APP_SEND_OP_COND, 0x0030, 0x0000, - MMC_CMDAT_R3 | (retries < 2 ? 0 - : MMC_CMDAT_INIT)); - if (resp[0] & 0x80000000) { - mmc_dev.if_type = IF_TYPE_SD; - debug("Detected SD card\n"); - break; - } - udelay(200000); - } - - if (retries <= 0 || !(IF_TYPE_SD == mmc_dev.if_type)) { - debug("Failed to detect SD Card, trying MMC\n"); - resp = - mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ff, 0x8000, MMC_CMDAT_R3); - - retries = 10; - while (retries-- && resp && !(resp[0] & 0x80000000)) { - udelay(200000); - resp = - mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ff, 0x8000, - MMC_CMDAT_R3); - } - } - - /* try to get card id */ - resp = - mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, 0, MMC_CMDAT_R2 | MMC_CMDAT_BUSY); - if (resp) { - memcpy(cid_resp, resp, sizeof(cid_resp)); - - /* MMC exists, get CSD too */ - resp = mmc_cmd(MMC_CMD_SET_RELATIVE_ADDR, 0, 0, MMC_CMDAT_R1); - if (IF_TYPE_SD == mmc_dev.if_type) - rca = ((resp[0] & 0xffff0000) >> 16); - resp = mmc_cmd(MMC_CMD_SEND_CSD, rca, 0, MMC_CMDAT_R2); - if (resp) { - mmc_decode_csd(resp); - rc = 0; - mmc_ready = 1; - } - - mmc_decode_cid(cid_resp); - } - - writel(0, MMC_CLKRT); /* 20 MHz */ - resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca, 0, MMC_CMDAT_R1); - -#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) - if (IF_TYPE_SD == mmc_dev.if_type) { - resp = mmc_cmd(MMC_CMD_APP_CMD, rca, 0, MMC_CMDAT_R1); - resp = mmc_cmd(SD_CMD_APP_SET_BUS_WIDTH, 0, 2, MMC_CMDAT_R1); - wide = MMC_CMDAT_SD_4DAT; - } -#endif - - fat_register_device(&mmc_dev, 1); /* partitions start counting with 1 */ - - return rc; -} diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c index b9782367e2..dc49d37f5c 100644 --- a/drivers/mmc/s5p_sdhci.c +++ b/drivers/mmc/s5p_sdhci.c @@ -83,7 +83,8 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width) host->ioaddr = (void *)regbase; host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE | - SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR; + SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR | + SDHCI_QUIRK_WAIT_SEND_CMD; host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; host->version = sdhci_readw(host, SDHCI_HOST_VERSION); diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 2e3c408bc5..7845f873ac 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -82,8 +82,15 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data, unsigned int start_addr) { unsigned int stat, rdy, mask, timeout, block = 0; +#ifdef CONFIG_MMC_SDMA + unsigned char ctrl; + ctrl = sdhci_readl(host, SDHCI_HOST_CONTROL); + ctrl &= ~SDHCI_CTRL_DMA_MASK; + ctrl |= SDHCI_CTRL_SDMA; + sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL); +#endif - timeout = 10000; + timeout = 1000000; rdy = SDHCI_INT_SPACE_AVAIL | SDHCI_INT_DATA_AVAIL; mask = SDHCI_DATA_AVAILABLE | SDHCI_SPACE_AVAILABLE; do { @@ -233,6 +240,9 @@ int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, if (!ret && data) ret = sdhci_transfer_data(host, data, start_addr); + if (host->quirks & SDHCI_QUIRK_WAIT_SEND_CMD) + udelay(1000); + stat = sdhci_readl(host, SDHCI_INT_STATUS); sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS); if (!ret) { diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 43140f3647..b2dfc5369d 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -752,8 +752,8 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c) */ static flash_sect_t find_sector (flash_info_t * info, ulong addr) { - static flash_sect_t saved_sector = 0; /* previously found sector */ - static flash_info_t *saved_info = 0; /* previously used flash bank */ + static flash_sect_t saved_sector; /* previously found sector */ + static flash_info_t *saved_info; /* previously used flash bank */ flash_sect_t sector = saved_sector; if ((info != saved_info) || (sector >= info->sector_count)) @@ -1147,8 +1147,9 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) } if (use_flash_status_poll(info)) { - cfiword_t cword = (cfiword_t)0xffffffffffffffffULL; + cfiword_t cword; void *dest; + cword.ll = 0xffffffffffffffffULL; dest = flash_map(info, sect, 0); st = flash_status_poll(info, &cword, dest, info->erase_blk_tout, "erase"); @@ -1430,8 +1431,8 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) static int cfi_protect_bugfix(flash_info_t *info, long sector, int prot) { - if ((info->manufacturer_id == (uchar)INTEL_MANUFACT) && - (info->device_id == NUMONYX_256MBIT)) { + if (info->manufacturer_id == ((INTEL_MANUFACT & FLASH_VENDMASK) >> 16) + && info->device_id == NUMONYX_256MBIT) { /* * see errata called * "Numonyx Axcell P33/P30 Specification Update" :) @@ -1487,7 +1488,8 @@ int flash_real_protect (flash_info_t * info, long sector, int prot) case CFI_CMDSET_AMD_EXTENDED: case CFI_CMDSET_AMD_STANDARD: /* U-Boot only checks the first byte */ - if (info->manufacturer_id == (uchar)ATM_MANUFACT) { + if (info->manufacturer_id == + ((ATM_MANUFACT & FLASH_VENDMASK) >> 16)) { if (prot) { flash_unlock_seq (info, 0); flash_write_cmd (info, 0, @@ -1505,7 +1507,8 @@ int flash_real_protect (flash_info_t * info, long sector, int prot) 0, ATM_CMD_UNLOCK_SECT); } } - if (info->manufacturer_id == (uchar)AMD_MANUFACT) { + if (info->manufacturer_id == + ((AMD_MANUFACT & FLASH_VENDMASK) >> 16)) { int flag = disable_interrupts(); int lock_flag; @@ -1735,7 +1738,8 @@ static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry) flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI); #ifdef CONFIG_SYS_FLASH_PROTECTION - if (info->ext_addr && info->manufacturer_id == (uchar)AMD_MANUFACT) { + if (info->ext_addr && info->manufacturer_id == + ((AMD_MANUFACT & FLASH_VENDMASK) >> 16)) { ushort spus; /* read sector protect/unprotect scheme */ @@ -1854,7 +1858,7 @@ static void flash_read_cfi (flash_info_t *info, void *buf, p[i] = flash_read_uchar(info, start + i); } -void __flash_cmd_reset(flash_info_t *info) +static void __flash_cmd_reset(flash_info_t *info) { /* * We do not yet know what kind of commandset to use, so we issue diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 71f5027889..d3b71a50ad 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2601,6 +2601,7 @@ static const struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, int *maf_id, int *dev_id, const struct nand_flash_dev *type) { + const char *name; int i, maf_idx; u8 id_data[8]; int ret; @@ -2848,14 +2849,14 @@ ident_done: chip->cmdfunc = nand_command_lp; /* TODO onfi flash name */ - MTDDEBUG (MTD_DEBUG_LEVEL0, "NAND device: Manufacturer ID:" - " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id, - nand_manuf_ids[maf_idx].name, + name = type->name; #ifdef CONFIG_SYS_NAND_ONFI_DETECTION - chip->onfi_version ? chip->onfi_params.model : type->name); -#else - type->name); + if (chip->onfi_version) + name = chip->onfi_params.model; #endif + MTDDEBUG(MTD_DEBUG_LEVEL0, "NAND device: Manufacturer ID:" + " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id, + nand_manuf_ids[maf_idx].name, name); return type; } diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c index 81f0e0812b..097cf625b8 100644 --- a/drivers/mtd/nand/nand_ecc.c +++ b/drivers/mtd/nand/nand_ecc.c @@ -39,6 +39,7 @@ #include <asm/errno.h> #include <linux/mtd/mtd.h> +#include <linux/mtd/nand_ecc.h> /* The PPC4xx NDFC uses Smart Media (SMC) bytes order */ #ifdef CONFIG_NAND_NDFC diff --git a/drivers/mtd/nand/tegra_nand.c b/drivers/mtd/nand/tegra_nand.c index 5408c51ffb..4d94cc6f56 100644 --- a/drivers/mtd/nand/tegra_nand.c +++ b/drivers/mtd/nand/tegra_nand.c @@ -219,6 +219,34 @@ static uint8_t read_byte(struct mtd_info *mtd) } /** + * Read len bytes from the chip into a buffer + * + * @param mtd MTD device structure + * @param buf buffer to store data to + * @param len number of bytes to read + * + * Read function for 8bit bus-width + */ +static void read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i, s; + unsigned int reg; + struct nand_chip *chip = mtd->priv; + struct nand_drv *info = (struct nand_drv *)chip->priv; + + for (i = 0; i < len; i += 4) { + s = (len - i) > 4 ? 4 : len - i; + writel(CMD_PIO | CMD_RX | CMD_A_VALID | CMD_CE0 | + ((s - 1) << CMD_TRANS_SIZE_SHIFT) | CMD_GO, + &info->reg->command); + if (!nand_waitfor_cmd_completion(info->reg)) + puts("Command timeout during read_buf\n"); + reg = readl(&info->reg->resp); + memcpy(buf + i, ®, s); + } +} + +/** * Check NAND status to see if it is ready or not * * @param mtd MTD device structure @@ -317,6 +345,7 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, switch (command) { case NAND_CMD_READID: writel(NAND_CMD_READID, &info->reg->cmd_reg1); + writel(column & 0xFF, &info->reg->addr_reg1); writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_PIO | CMD_RX | ((4 - 1) << CMD_TRANS_SIZE_SHIFT) @@ -324,6 +353,12 @@ static void nand_command(struct mtd_info *mtd, unsigned int command, &info->reg->command); info->pio_byte_index = 0; break; + case NAND_CMD_PARAM: + writel(NAND_CMD_PARAM, &info->reg->cmd_reg1); + writel(column & 0xFF, &info->reg->addr_reg1); + writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_CE0, + &info->reg->command); + break; case NAND_CMD_READ0: writel(NAND_CMD_READ0, &info->reg->cmd_reg1); writel(NAND_CMD_READSTART, &info->reg->cmd_reg2); @@ -976,6 +1011,7 @@ int tegra_nand_init(struct nand_chip *nand, int devnum) nand->options = LP_OPTIONS; nand->cmdfunc = nand_command; nand->read_byte = read_byte; + nand->read_buf = read_buf; nand->ecc.read_page = nand_read_page_hwecc; nand->ecc.write_page = nand_write_page_hwecc; nand->ecc.read_page_raw = nand_read_page_raw; diff --git a/drivers/mtd/ubi/crc32.c b/drivers/mtd/ubi/crc32.c index a7e26b0456..ab439b3e20 100644 --- a/drivers/mtd/ubi/crc32.c +++ b/drivers/mtd/ubi/crc32.c @@ -38,17 +38,9 @@ #include "crc32defs.h" #define CRC_LE_BITS 8 -# define __force -#ifndef __constant_cpu_to_le32 -#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x)) -#endif -#ifndef __constant_le32_to_cpu -#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x)) -#endif - #if CRC_LE_BITS == 8 -#define tole(x) __constant_cpu_to_le32(x) -#define tobe(x) __constant_cpu_to_be32(x) +#define tole(x) cpu_to_le32(x) +#define tobe(x) cpu_to_be32(x) #else #define tole(x) (x) #define tobe(x) (x) diff --git a/drivers/net/Makefile b/drivers/net/Makefile index e4abac7c8f..786a6567a5 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -59,7 +59,6 @@ COBJS-$(CONFIG_MVGBE) += mvgbe.o COBJS-$(CONFIG_NATSEMI) += natsemi.o COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o -COBJS-$(CONFIG_DRIVER_NETARMETH) += netarm_eth.o COBJS-$(CONFIG_NETCONSOLE) += netconsole.o COBJS-$(CONFIG_NS8382X) += ns8382x.o COBJS-$(CONFIG_PCNET) += pcnet.o diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index cc57354755..7a1fcdd81f 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -32,6 +32,10 @@ COBJS-y += init.o COBJS-y += tgec.o COBJS-y += tgec_phy.o +# Soc have FMAN v3 with mEMAC +COBJS-$(CONFIG_SYS_FMAN_V3) += memac_phy.o +COBJS-$(CONFIG_SYS_FMAN_V3) += memac.o + # SoC specific SERDES support COBJS-$(CONFIG_P1017) += p1023.o COBJS-$(CONFIG_P1023) += p1023.o @@ -40,6 +44,8 @@ COBJS-$(CONFIG_PPC_P2041) += p5020.o COBJS-$(CONFIG_PPC_P3041) += p5020.o COBJS-$(CONFIG_PPC_P4080) += p4080.o COBJS-$(CONFIG_PPC_P5020) += p5020.o +COBJS-$(CONFIG_PPC_T4240) += t4240.o +COBJS-$(CONFIG_PPC_B4860) += b4860.o endif COBJS := $(COBJS-y) diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index 2b616adb6e..54b142f47d 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2011 Freescale Semiconductor, Inc. + * Copyright 2009-2012 Freescale Semiconductor, Inc. * Dave Liu <daveliu@freescale.com> * * This program is free software; you can redistribute it and/or @@ -28,6 +28,7 @@ #include <phy.h> #include <asm/fsl_dtsec.h> #include <asm/fsl_tgec.h> +#include <asm/fsl_memac.h> #include "fm.h" @@ -45,8 +46,30 @@ static int num_controllers; TBICR_FULL_DUPLEX | TBICR_SPEED1_SET) /* Configure the TBI for SGMII operation */ -void dtsec_configure_serdes(struct fm_eth *priv) +static void dtsec_configure_serdes(struct fm_eth *priv) { +#ifdef CONFIG_SYS_FMAN_V3 + u32 value; + struct mii_dev bus; + bus.priv = priv->mac->phyregs; + + /* SGMII IF mode + AN enable */ + value = PHY_SGMII_IF_MODE_AN | PHY_SGMII_IF_MODE_SGMII; + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x14, value); + + /* Dev ability according to SGMII specification */ + value = PHY_SGMII_DEV_ABILITY_SGMII; + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x4, value); + + /* Adjust link timer for SGMII - + 1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 */ + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x13, 0x3); + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0xd40); + + /* Restart AN */ + value = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN; + memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0, value); +#else struct dtsec *regs = priv->mac->base; struct tsec_mii_mng *phyregs = priv->mac->phyregs; @@ -60,15 +83,18 @@ void dtsec_configure_serdes(struct fm_eth *priv) TBIANA_SGMII_ACK); tsec_local_mdio_write(phyregs, in_be32(®s->tbipa), 0, TBI_CR, TBICR_SETTINGS); +#endif } static void dtsec_init_phy(struct eth_device *dev) { struct fm_eth *fm_eth = dev->priv; - struct dtsec *regs = (struct dtsec *)fm_eth->mac->base; +#ifndef CONFIG_SYS_FMAN_V3 + struct dtsec *regs = (struct dtsec *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR; /* Assign a Physical address to the TBI */ out_be32(®s->tbipa, CONFIG_SYS_TBIPA_VALUE); +#endif if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII) dtsec_configure_serdes(fm_eth); @@ -541,6 +567,10 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg) num = fm_eth->num; +#ifdef CONFIG_SYS_FMAN_V3 + base = ®->memac[num].fm_memac; + phyregs = ®->memac[num].fm_memac_mdio; +#else /* Get the mac registers base address */ if (fm_eth->type == FM_ETH_1G_E) { base = ®->mac_1g[num].fm_dtesc; @@ -549,6 +579,7 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg) base = ®->mac_10g[num].fm_10gec; phyregs = ®->mac_10g[num].fm_10gec_mdio; } +#endif /* alloc mac controller */ mac = malloc(sizeof(struct fsl_enet_mac)); @@ -559,10 +590,14 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg) /* save the mac to fm_eth struct */ fm_eth->mac = mac; +#ifdef CONFIG_SYS_FMAN_V3 + init_memac(mac, base, phyregs, MAX_RXBUF_LEN); +#else if (fm_eth->type == FM_ETH_1G_E) init_dtsec(mac, base, phyregs, MAX_RXBUF_LEN); else init_tgec(mac, base, phyregs, MAX_RXBUF_LEN); +#endif return 1; } diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c index 736b8b9582..ae389b8842 100644 --- a/drivers/net/fm/init.c +++ b/drivers/net/fm/init.c @@ -38,6 +38,15 @@ struct fm_eth_info fm_info[] = { #if (CONFIG_SYS_NUM_FM1_DTSEC >= 5) FM_DTSEC_INFO_INITIALIZER(1, 5), #endif +#if (CONFIG_SYS_NUM_FM1_DTSEC >= 6) + FM_DTSEC_INFO_INITIALIZER(1, 6), +#endif +#if (CONFIG_SYS_NUM_FM1_DTSEC >= 7) + FM_DTSEC_INFO_INITIALIZER(1, 9), +#endif +#if (CONFIG_SYS_NUM_FM1_DTSEC >= 8) + FM_DTSEC_INFO_INITIALIZER(1, 10), +#endif #if (CONFIG_SYS_NUM_FM2_DTSEC >= 1) FM_DTSEC_INFO_INITIALIZER(2, 1), #endif @@ -53,6 +62,15 @@ struct fm_eth_info fm_info[] = { #if (CONFIG_SYS_NUM_FM2_DTSEC >= 5) FM_DTSEC_INFO_INITIALIZER(2, 5), #endif +#if (CONFIG_SYS_NUM_FM2_DTSEC >= 6) + FM_DTSEC_INFO_INITIALIZER(2, 6), +#endif +#if (CONFIG_SYS_NUM_FM2_DTSEC >= 7) + FM_DTSEC_INFO_INITIALIZER(2, 9), +#endif +#if (CONFIG_SYS_NUM_FM2_DTSEC >= 8) + FM_DTSEC_INFO_INITIALIZER(2, 10), +#endif #if (CONFIG_SYS_NUM_FM1_10GEC >= 1) FM_TGEC_INFO_INITIALIZER(1, 1), #endif diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c new file mode 100644 index 0000000000..32c7054e35 --- /dev/null +++ b/drivers/net/fm/memac.c @@ -0,0 +1,132 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Roy Zang <tie-fei.zang@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* MAXFRM - maximum frame length */ +#define MAXFRM_MASK 0x0000ffff + +#include <common.h> +#include <phy.h> +#include <asm/types.h> +#include <asm/io.h> +#include <asm/fsl_enet.h> +#include <asm/fsl_memac.h> + +#include "fm.h" + +static void memac_init_mac(struct fsl_enet_mac *mac) +{ + struct memac *regs = mac->base; + + /* mask all interrupt */ + out_be32(®s->imask, IMASK_MASK_ALL); + + /* clear all events */ + out_be32(®s->ievent, IEVENT_CLEAR_ALL); + + /* set the max receive length */ + out_be32(®s->maxfrm, mac->max_rx_len & MAXFRM_MASK); + + /* multicast frame reception for the hash entry disable */ + out_be32(®s->hashtable_ctrl, 0); +} + +static void memac_enable_mac(struct fsl_enet_mac *mac) +{ + struct memac *regs = mac->base; + + setbits_be32(®s->command_config, MEMAC_CMD_CFG_RXTX_EN); +} + +static void memac_disable_mac(struct fsl_enet_mac *mac) +{ + struct memac *regs = mac->base; + + clrbits_be32(®s->command_config, MEMAC_CMD_CFG_RXTX_EN); +} + +static void memac_set_mac_addr(struct fsl_enet_mac *mac, u8 *mac_addr) +{ + struct memac *regs = mac->base; + u32 mac_addr0, mac_addr1; + + /* + * if a station address of 0x12345678ABCD, perform a write to + * MAC_ADDR0 of 0x78563412, MAC_ADDR1 of 0x0000CDAB + */ + mac_addr0 = (mac_addr[3] << 24) | (mac_addr[2] << 16) | \ + (mac_addr[1] << 8) | (mac_addr[0]); + out_be32(®s->mac_addr_0, mac_addr0); + + mac_addr1 = ((mac_addr[5] << 8) | mac_addr[4]) & 0x0000ffff; + out_be32(®s->mac_addr_1, mac_addr1); +} + +static void memac_set_interface_mode(struct fsl_enet_mac *mac, + phy_interface_t type, int speed) +{ + /* Roy need more work here */ + + struct memac *regs = mac->base; + u32 if_mode, if_status; + + /* clear all bits relative with interface mode */ + if_mode = in_be32(®s->if_mode); + if_status = in_be32(®s->if_status); + + /* set interface mode */ + switch (type) { + case PHY_INTERFACE_MODE_GMII: + if_mode &= ~IF_MODE_MASK; + if_mode |= IF_MODE_GMII; + break; + case PHY_INTERFACE_MODE_RGMII: + if_mode |= (IF_MODE_GMII | IF_MODE_RG); + break; + case PHY_INTERFACE_MODE_RMII: + if_mode |= (IF_MODE_GMII | IF_MODE_RM); + break; + case PHY_INTERFACE_MODE_SGMII: + if_mode &= ~IF_MODE_MASK; + if_mode |= (IF_MODE_GMII); + break; + default: + break; + } + /* Enable automatic speed selection */ + if_mode |= IF_MODE_EN_AUTO; + + debug(" %s, if_mode = %x\n", __func__, if_mode); + debug(" %s, if_status = %x\n", __func__, if_status); + out_be32(®s->if_mode, if_mode); + return; +} + +void init_memac(struct fsl_enet_mac *mac, void *base, + void *phyregs, int max_rx_len) +{ + mac->base = base; + mac->phyregs = phyregs; + mac->max_rx_len = max_rx_len; + mac->init_mac = memac_init_mac; + mac->enable_mac = memac_enable_mac; + mac->disable_mac = memac_disable_mac; + mac->set_mac_addr = memac_set_mac_addr; + mac->set_if_mode = memac_set_interface_mode; +} diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c new file mode 100644 index 0000000000..ea6118b9b9 --- /dev/null +++ b/drivers/net/fm/memac_phy.c @@ -0,0 +1,150 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Andy Fleming <afleming@freescale.com> + * Roy Zang <tie-fei.zang@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * Some part is taken from tsec.c + */ +#include <common.h> +#include <miiphy.h> +#include <phy.h> +#include <asm/io.h> +#include <asm/fsl_memac.h> +#include <fm_eth.h> + +/* + * Write value to the PHY for this device to the register at regnum, waiting + * until the write is done before it returns. All PHY configuration has to be + * done through the TSEC1 MIIM regs + */ +int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum, u16 value) +{ + u32 mdio_ctl; + struct memac_mdio_controller *regs = bus->priv; + u32 c45 = 1; /* Default to 10G interface */ + + if (dev_addr == MDIO_DEVAD_NONE) { + c45 = 0; /* clause 22 */ + dev_addr = regnum & 0x1f; + clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC); + } else { + setbits_be32(®s->mdio_stat, MDIO_STAT_ENC); + setbits_be32(®s->mdio_stat, MDIO_STAT_HOLD_15_CLK); + } + + /* Wait till the bus is free */ + while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Set the port and dev addr */ + mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr); + out_be32(®s->mdio_ctl, mdio_ctl); + + /* Set the register address */ + if (c45) + out_be32(®s->mdio_addr, regnum & 0xffff); + + /* Wait till the bus is free */ + while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Write the value to the register */ + out_be32(®s->mdio_data, MDIO_DATA(value)); + + /* Wait till the MDIO write is complete */ + while ((in_be32(®s->mdio_data)) & MDIO_DATA_BSY) + ; + + return 0; +} + +/* + * Reads from register regnum in the PHY for device dev, returning the value. + * Clears miimcom first. All PHY configuration has to be done through the + * TSEC1 MIIM regs + */ +int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum) +{ + u32 mdio_ctl; + struct memac_mdio_controller *regs = bus->priv; + u32 c45 = 1; + + if (dev_addr == MDIO_DEVAD_NONE) { + c45 = 0; /* clause 22 */ + dev_addr = regnum & 0x1f; + clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC); + } else { + setbits_be32(®s->mdio_stat, MDIO_STAT_ENC); + setbits_be32(®s->mdio_stat, MDIO_STAT_HOLD_15_CLK); + } + + /* Wait till the bus is free */ + while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Set the Port and Device Addrs */ + mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr); + out_be32(®s->mdio_ctl, mdio_ctl); + + /* Set the register address */ + if (c45) + out_be32(®s->mdio_addr, regnum & 0xffff); + + /* Wait till the bus is free */ + while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY) + ; + + /* Initiate the read */ + mdio_ctl |= MDIO_CTL_READ; + out_be32(®s->mdio_ctl, mdio_ctl); + + /* Wait till the MDIO write is complete */ + while ((in_be32(®s->mdio_data)) & MDIO_DATA_BSY) + ; + + /* Return all Fs if nothing was there */ + if (in_be32(®s->mdio_stat) & MDIO_STAT_RD_ER) + return 0xffff; + + return in_be32(®s->mdio_data) & 0xffff; +} + +int memac_mdio_reset(struct mii_dev *bus) +{ + return 0; +} + +int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info) +{ + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate FM TGEC MDIO bus\n"); + return -1; + } + + bus->read = memac_mdio_read; + bus->write = memac_mdio_write; + bus->reset = memac_mdio_reset; + sprintf(bus->name, info->name); + + bus->priv = info->regs; + + return mdio_register(bus); +} diff --git a/drivers/net/fm/p1023.c b/drivers/net/fm/p1023.c index 9765da5b23..387d2a382d 100644 --- a/drivers/net/fm/p1023.c +++ b/drivers/net/fm/p1023.c @@ -23,7 +23,7 @@ #include <asm/immap_85xx.h> #include <asm/fsl_serdes.h> -u32 port_to_devdisr[] = { +static u32 port_to_devdisr[] = { [FM1_DTSEC1] = MPC85xx_DEVDISR_TSEC1, [FM1_DTSEC2] = MPC85xx_DEVDISR_TSEC2, }; diff --git a/drivers/net/fm/p4080.c b/drivers/net/fm/p4080.c index 9dc6049c36..b04fd0f656 100644 --- a/drivers/net/fm/p4080.c +++ b/drivers/net/fm/p4080.c @@ -23,7 +23,7 @@ #include <asm/immap_85xx.h> #include <asm/fsl_serdes.h> -u32 port_to_devdisr[] = { +static u32 port_to_devdisr[] = { [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1, [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2, [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3, diff --git a/drivers/net/fm/p5020.c b/drivers/net/fm/p5020.c index a7a6e43fe2..5391044833 100644 --- a/drivers/net/fm/p5020.c +++ b/drivers/net/fm/p5020.c @@ -23,7 +23,7 @@ #include <asm/immap_85xx.h> #include <asm/fsl_serdes.h> -u32 port_to_devdisr[] = { +static u32 port_to_devdisr[] = { [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1, [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2, [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3, diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c new file mode 100644 index 0000000000..48c530c915 --- /dev/null +++ b/drivers/net/fm/t4240.c @@ -0,0 +1,128 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Roy Zang <tie-fei.zang@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <phy.h> +#include <fm_eth.h> +#include <asm/io.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_serdes.h> + +u32 port_to_devdisr[] = { + [FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1, + [FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2, + [FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3, + [FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4, + [FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5, + [FM1_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC1_6, + [FM1_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC1_9, + [FM1_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC1_10, + [FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1_1, + [FM1_10GEC2] = FSL_CORENET_DEVDISR2_10GEC1_2, + [FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1, + [FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2, + [FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3, + [FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4, + [FM2_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC2_5, + [FM2_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC2_6, + [FM2_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC2_9, + [FM2_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC2_10, + [FM2_10GEC1] = FSL_CORENET_DEVDISR2_10GEC2_1, + [FM2_10GEC2] = FSL_CORENET_DEVDISR2_10GEC2_2, +}; + +static int is_device_disabled(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 devdisr2 = in_be32(&gur->devdisr2); + + return port_to_devdisr[port] & devdisr2; +} + +void fman_disable_port(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + + setbits_be32(&gur->devdisr2, port_to_devdisr[port]); +} + +phy_interface_t fman_port_enet_if(enum fm_port port) +{ + ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 rcwsr13 = in_be32(&gur->rcwsr[13]); + + if (is_device_disabled(port)) + return PHY_INTERFACE_MODE_NONE; + + if ((port == FM1_10GEC1 || port == FM1_10GEC2) + && (is_serdes_configured(XAUI_FM1))) + return PHY_INTERFACE_MODE_XGMII; + + if ((port == FM2_10GEC1 || port == FM2_10GEC2) + && (is_serdes_configured(XAUI_FM2))) + return PHY_INTERFACE_MODE_XGMII; + +#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */ +#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000 +#define FSL_CORENET_RCWSR13_EC2 0x18000000 /* bits 419..420 */ +#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII 0x00000000 +#define FSL_CORENET_RCWSR13_EC2_FM2_DTSEC6_RGMII 0x08000000 +#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO 0x10000000 + /* handle RGMII first */ + if ((port == FM2_DTSEC5) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) == + FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + if ((port == FM1_DTSEC5) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + + if ((port == FM2_DTSEC6) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == + FSL_CORENET_RCWSR13_EC2_FM2_DTSEC6_RGMII)) + return PHY_INTERFACE_MODE_RGMII; + switch (port) { + case FM1_DTSEC1: + case FM1_DTSEC2: + case FM1_DTSEC3: + case FM1_DTSEC4: + case FM1_DTSEC5: + case FM1_DTSEC6: + case FM1_DTSEC9: + case FM1_DTSEC10: + if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + break; + case FM2_DTSEC1: + case FM2_DTSEC2: + case FM2_DTSEC3: + case FM2_DTSEC4: + case FM2_DTSEC5: + case FM2_DTSEC6: + case FM2_DTSEC9: + case FM2_DTSEC10: + if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1)) + return PHY_INTERFACE_MODE_SGMII; + break; + default: + return PHY_INTERFACE_MODE_NONE; + } + + return PHY_INTERFACE_MODE_NONE; +} diff --git a/drivers/net/fm/tgec_phy.c b/drivers/net/fm/tgec_phy.c index 2d349ad037..2be69d7162 100644 --- a/drivers/net/fm/tgec_phy.c +++ b/drivers/net/fm/tgec_phy.c @@ -30,8 +30,8 @@ * until the write is done before it returns. All PHY configuration has to be * done through the TSEC1 MIIM regs */ -int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, - int regnum, u16 value) +static int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum, u16 value) { u32 mdio_ctl; u32 stat_val; @@ -72,8 +72,8 @@ int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, * Clears miimcom first. All PHY configuration has to be done through the * TSEC1 MIIM regs */ -int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, - int regnum) +static int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum) { u32 mdio_ctl; u32 stat_val; @@ -114,7 +114,7 @@ int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, return in_be32(®s->mdio_data) & 0xffff; } -int tgec_mdio_reset(struct mii_dev *bus) +static int tgec_mdio_reset(struct mii_dev *bus) { return 0; } diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 0e1ced71c5..8bacbda719 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -51,8 +51,6 @@ #include "macb.h" -#define barrier() asm volatile("" ::: "memory") - #define CONFIG_SYS_MACB_RX_BUFFER_SIZE 4096 #define CONFIG_SYS_MACB_RX_RING_SIZE (CONFIG_SYS_MACB_RX_BUFFER_SIZE / 128) #define CONFIG_SYS_MACB_TX_RING_SIZE 16 diff --git a/drivers/net/mcfmii.c b/drivers/net/mcfmii.c index 471c5efea1..5e64dbdd17 100644 --- a/drivers/net/mcfmii.c +++ b/drivers/net/mcfmii.c @@ -315,13 +315,11 @@ int mcffec_miiphy_read(const char *devname, unsigned char addr, unsigned char re int mcffec_miiphy_write(const char *devname, unsigned char addr, unsigned char reg, unsigned short value) { - short rdreg; /* register working value */ - #ifdef MII_DEBUG printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr); #endif - rdreg = mii_send(mk_mii_write(addr, reg, value)); + mii_send(mk_mii_write(addr, reg, value)); #ifdef MII_DEBUG printf("0x%04x\n", value); diff --git a/drivers/net/netarm_eth.c b/drivers/net/netarm_eth.c deleted file mode 100644 index 325f16c3a8..0000000000 --- a/drivers/net/netarm_eth.c +++ /dev/null @@ -1,352 +0,0 @@ -/* - * Copyright (C) 2004 IMMS gGmbH <www.imms.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * author(s): Thomas Elste, <info@elste.org> - * (some parts derived from uCLinux Netarm Ethernet Driver) - */ - - -#include <common.h> -#include <command.h> -#include <net.h> -#include "netarm_eth.h" -#include <asm/arch/netarm_registers.h> - -static int na_mii_poll_busy (void); - -static void na_get_mac_addr (void) -{ - unsigned short p[3]; - char *m_addr; - char ethaddr[20]; - - m_addr = (char *) p; - - p[0] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_1); - p[1] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_2); - p[2] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_3); - - sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", - m_addr[0], m_addr[1], - m_addr[2], m_addr[3], m_addr[4], m_addr[5]); - - printf ("HW-MAC Address: %s\n", ethaddr); - - /* set env, todo: check if already an adress is set */ - setenv ("ethaddr", ethaddr); -} - -static void na_mii_write (int reg, int value) -{ - int mii_addr; - - /* Select register */ - mii_addr = CONFIG_SYS_ETH_PHY_ADDR + reg; - SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr); - /* Write value */ - SET_EADDR (NETARM_ETH_MII_WRITE, value); - na_mii_poll_busy (); -} - -static unsigned int na_mii_read (int reg) -{ - int mii_addr, val; - - /* Select register */ - mii_addr = CONFIG_SYS_ETH_PHY_ADDR + reg; - SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr); - /* do one management cycle */ - SET_EADDR (NETARM_ETH_MII_CMD, - GET_EADDR (NETARM_ETH_MII_CMD) | NETARM_ETH_MIIC_RSTAT); - na_mii_poll_busy (); - /* Return read value */ - val = GET_EADDR (NETARM_ETH_MII_READ); - return val; -} - -static int na_mii_poll_busy (void) -{ - ulong start; - /* arm simple, non interrupt dependent timer */ - start = get_timer(0)); - while (get_timer(start) < NA_MII_POLL_BUSY_DELAY) { - if (!(GET_EADDR (NETARM_ETH_MII_IND) & NETARM_ETH_MIII_BUSY)) { - return 1; - } - } - printf ("na_mii_busy timeout\n"); - return (0); -} - -static int na_mii_identify_phy (void) -{ - int id_reg_a = 0; - - /* get phy id register */ - id_reg_a = na_mii_read (MII_PHY_ID); - - if (id_reg_a == 0x0043) { - /* This must be an Enable or a Lucent LU3X31 PHY chip */ - return 1; - } else if (id_reg_a == 0x0013) { - /* it is an Intel LXT971A */ - return 1; - } - return (0); -} - -static int na_mii_negotiate (void) -{ - int i = 0; - - /* Enable auto-negotiation */ - na_mii_write (MII_PHY_AUTONEGADV, 0x01e1); - /* FIXME: 0x01E1 is 100Mb half and full duplex, 0x0061 is 10Mb only */ - /* Restart auto-negotiation */ - na_mii_write (MII_PHY_CONTROL, 0x1200); - - /* status register is 0xffff after setting the autoneg restart bit */ - while (na_mii_read (MII_PHY_STATUS) == 0xffff) { - i++; - } - - /* na_mii_read uses the timer already, so we can't use it again for - timeout checking. - Instead we just try some times. - */ - for (i = 0; i < 40000; i++) { - if ((na_mii_read (MII_PHY_STATUS) & 0x0024) == 0x0024) { - return 0; - } - } - /* - printf("*Warning* autonegotiation timeout, status: 0x%x\n",na_mii_read(MII_PHY_STATUS)); - */ - return (1); -} - -static unsigned int na_mii_check_speed (void) -{ - unsigned int status; - - /* Read Status register */ - status = na_mii_read (MII_PHY_STATUS); - /* Check link status. If 0, default to 100 Mbps. */ - if ((status & 0x0004) == 0) { - printf ("*Warning* no link detected, set default speed to 100Mbs\n"); - return 1; - } else { - if ((na_mii_read (17) & 0x4000) != 0) { - printf ("100Mbs link detected\n"); - return 1; - } else { - printf ("10Mbs link detected\n"); - return 0; - } - } - return 0; -} - -static int reset_eth (void) -{ - int pt; - ulong start; - - na_get_mac_addr (); - pt = na_mii_identify_phy (); - - /* reset the phy */ - na_mii_write (MII_PHY_CONTROL, 0x8000); - start = get_timer(0); - while (get_timer(start) < NA_MII_NEGOTIATE_DELAY) { - if ((na_mii_read (MII_PHY_STATUS) & 0x8000) == 0) { - break; - } - } - if (get_timer(start) >= NA_MII_NEGOTIATE_DELAY) - printf ("phy reset timeout\n"); - - /* set the PCS reg */ - SET_EADDR (NETARM_ETH_PCS_CFG, NETARM_ETH_PCSC_CLKS_25M | - NETARM_ETH_PCSC_ENJAB | NETARM_ETH_PCSC_NOCFR); - - na_mii_negotiate (); - na_mii_check_speed (); - - /* Delay 10 millisecond. (Maybe this should be 1 second.) */ - udelay (10000); - - /* Turn receive on. - Enable statistics register autozero on read. - Do not insert MAC address on transmit. - Do not enable special test modes. */ - SET_EADDR (NETARM_ETH_STL_CFG, - (NETARM_ETH_STLC_AUTOZ | NETARM_ETH_STLC_RXEN)); - - /* Set the inter-packet gap delay to 0.96us for MII. - The NET+ARM H/W Reference Guide indicates that the Back-to-back IPG - Gap Timer Register should be set to 0x15 and the Non Back-to-back IPG - Gap Timer Register should be set to 0x00000C12 for the MII PHY. */ - SET_EADDR (NETARM_ETH_B2B_IPG_GAP_TMR, 0x15); - SET_EADDR (NETARM_ETH_NB2B_IPG_GAP_TMR, 0x00000C12); - - /* Add CRC to end of packets. - Pad packets to minimum length of 64 bytes. - Allow unlimited length transmit packets. - Receive all broadcast packets. - NOTE: Multicast addressing is NOT enabled here currently. */ - SET_EADDR (NETARM_ETH_MAC_CFG, - (NETARM_ETH_MACC_CRCEN | - NETARM_ETH_MACC_PADEN | NETARM_ETH_MACC_HUGEN)); - SET_EADDR (NETARM_ETH_SAL_FILTER, NETARM_ETH_SALF_BROAD); - - /* enable fifos */ - SET_EADDR (NETARM_ETH_GEN_CTRL, - (NETARM_ETH_GCR_ERX | NETARM_ETH_GCR_ETX)); - - return (0); -} - - -extern int eth_init (bd_t * bd) -{ - reset_eth (); - return 0; -} - -extern void eth_halt (void) -{ - SET_EADDR (NETARM_ETH_GEN_CTRL, 0); -} - -/* Get a data block via Ethernet */ -extern int eth_rx (void) -{ - int i; - unsigned short rxlen; - unsigned int *addr; - unsigned int rxstatus, lastrxlen; - char *pa; - - /* RXBR is 1, data block was received */ - if ((GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXBR) == 0) - return 0; - - /* get status register and the length of received block */ - rxstatus = GET_EADDR (NETARM_ETH_RX_STAT); - rxlen = (rxstatus & NETARM_ETH_RXSTAT_SIZE) >> 16; - - if (rxlen == 0) - return 0; - - /* clear RXBR to make fifo available */ - SET_EADDR (NETARM_ETH_GEN_STAT, - GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_RXBR); - - /* clear TXBC to make fifo available */ - /* According to NETARM50 data manual you just have to clear - RXBR but that has no effect. Only after clearing TXBC the - Fifo becomes readable. */ - SET_EADDR (NETARM_ETH_GEN_STAT, - GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_TXBC); - - addr = (unsigned int *) NetRxPackets[0]; - pa = (char *) NetRxPackets[0]; - - /* read the fifo */ - for (i = 0; i < rxlen / 4; i++) { - *addr = GET_EADDR (NETARM_ETH_FIFO_DAT1); - addr++; - } - - if (GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXREGR) { - /* RXFDB indicates wether the last word is 1,2,3 or 4 bytes long */ - lastrxlen = - (GET_EADDR (NETARM_ETH_GEN_STAT) & - NETARM_ETH_GST_RXFDB) >> 28; - *addr = GET_EADDR (NETARM_ETH_FIFO_DAT1); - switch (lastrxlen) { - case 1: - *addr &= 0xff000000; - break; - case 2: - *addr &= 0xffff0000; - break; - case 3: - *addr &= 0xffffff00; - break; - } - } - - /* Pass the packet up to the protocol layers. */ - NetReceive (NetRxPackets[0], rxlen); - - return rxlen; -} - -/* Send a data block via Ethernet. */ -extern int eth_send(void *packet, int length) -{ - int i, length32; - char *pa; - unsigned int *pa32, lastp = 0, rest; - - pa = (char *) packet; - pa32 = (unsigned int *) packet; - length32 = length / 4; - rest = length % 4; - - /* make sure there's no garbage in the last word */ - switch (rest) { - case 0: - lastp = pa32[length32]; - length32--; - break; - case 1: - lastp = pa32[length32] & 0x000000ff; - break; - case 2: - lastp = pa32[length32] & 0x0000ffff; - break; - case 3: - lastp = pa32[length32] & 0x00ffffff; - break; - } - - /* write to the fifo */ - for (i = 0; i < length32; i++) - SET_EADDR (NETARM_ETH_FIFO_DAT1, pa32[i]); - - /* the last word is written to an extra register, this - starts the transmission */ - SET_EADDR (NETARM_ETH_FIFO_DAT2, lastp); - - /* NETARM_ETH_TXSTAT_TXOK should be checked, to know if the transmission - went fine. But we can't use the timer for a timeout loop because - of it is used already in upper layers. So we just try some times. */ - i = 0; - while (i < 50000) { - if ((GET_EADDR (NETARM_ETH_TX_STAT) & NETARM_ETH_TXSTAT_TXOK) - == NETARM_ETH_TXSTAT_TXOK) - return 0; - i++; - } - - printf ("eth_send timeout\n"); - return 1; -} diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index 798473dd68..9b3808bfa9 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -30,7 +30,7 @@ static int ar8021_config(struct phy_device *phydev) return 0; } -struct phy_driver AR8021_driver = { +static struct phy_driver AR8021_driver = { .name = "AR8021", .uid = 0x4dd040, .mask = 0xfffff0, diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index baef60f827..1ffa791dce 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -43,7 +43,7 @@ * what is supported. Returns < 0 on error, 0 if the PHY's advertisement * hasn't changed, and > 0 if it has changed. */ -int genphy_config_advert(struct phy_device *phydev) +static int genphy_config_advert(struct phy_device *phydev) { u32 advertise; int oldadv, adv; @@ -118,7 +118,7 @@ int genphy_config_advert(struct phy_device *phydev) * Description: Configures MII_BMCR to force speed/duplex * to the values in phydev. Assumes that the values are valid. */ -int genphy_setup_forced(struct phy_device *phydev) +static int genphy_setup_forced(struct phy_device *phydev) { int err; int ctl = 0; @@ -465,7 +465,7 @@ int phy_register(struct phy_driver *drv) return 0; } -int phy_probe(struct phy_device *phydev) +static int phy_probe(struct phy_device *phydev) { int err = 0; @@ -488,7 +488,7 @@ static struct phy_driver *generic_for_interface(phy_interface_t interface) return &genphy_driver; } -struct phy_driver *get_phy_driver(struct phy_device *phydev, +static struct phy_driver *get_phy_driver(struct phy_device *phydev, phy_interface_t interface) { struct list_head *entry; @@ -505,8 +505,9 @@ struct phy_driver *get_phy_driver(struct phy_device *phydev, return generic_for_interface(interface); } -struct phy_device *phy_device_create(struct mii_dev *bus, int addr, int phy_id, - phy_interface_t interface) +static struct phy_device *phy_device_create(struct mii_dev *bus, int addr, + int phy_id, + phy_interface_t interface) { struct phy_device *dev; @@ -549,7 +550,7 @@ struct phy_device *phy_device_create(struct mii_dev *bus, int addr, int phy_id, * Description: Reads the ID registers of the PHY at @addr on the * @bus, stores it in @phy_id and returns zero on success. */ -int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) +static int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) { int phy_reg; @@ -581,8 +582,8 @@ int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) * Description: Reads the ID registers of the PHY at @addr on the * @bus, then allocates and returns the phy_device to represent it. */ -struct phy_device *get_phy_device(struct mii_dev *bus, int addr, - phy_interface_t interface) +static struct phy_device *get_phy_device(struct mii_dev *bus, int addr, + phy_interface_t interface) { u32 phy_id = 0x1fffffff; int i; diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 0a0f40dbde..6c5cb99774 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -123,7 +123,7 @@ static int cis8204_config(struct phy_device *phydev) } /* Vitesse VSC8601 */ -int vsc8601_config(struct phy_device *phydev) +static int vsc8601_config(struct phy_device *phydev) { /* Configure some basic stuff */ #ifdef CONFIG_SYS_VSC8601_SKEWFIX diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c index 6dc7ad52e4..1357edee6c 100644 --- a/drivers/net/smc91111.c +++ b/drivers/net/smc91111.c @@ -178,8 +178,6 @@ static void smc_phy_configure(struct eth_device *dev); * inx,outx functions fixed this problem. */ -#define barrier() __asm__ __volatile__("": : :"memory") - static inline word SMC_inw(struct eth_device *dev, dword offset) { word v; diff --git a/drivers/net/vsc7385.c b/drivers/net/vsc7385.c index ada42c41f8..a5110e516d 100644 --- a/drivers/net/vsc7385.c +++ b/drivers/net/vsc7385.c @@ -16,6 +16,7 @@ #include <common.h> #include <asm/io.h> #include <asm/errno.h> +#include "vsc7385.h" /* * Upload a Vitesse VSC7385 firmware image to the hardware diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 0d46c96312..48ae16374d 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -1,5 +1,5 @@ /* - * Copyright 2007-2011 Freescale Semiconductor, Inc. + * Copyright 2007-2012 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -211,7 +211,7 @@ static int fsl_pci_setup_inbound_windows(struct pci_controller *hose, return 1; } -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER static void fsl_pcie_boot_master(pit_t *pi) { /* configure inbound window for slave's u-boot image */ @@ -276,14 +276,18 @@ static void fsl_pcie_boot_master_release_slave(int port) release_addr = CONFIG_SYS_PCIE1_MEM_VIRT + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; break; +#ifdef CONFIG_SYS_PCIE2_MEM_VIRT case 2: release_addr = CONFIG_SYS_PCIE2_MEM_VIRT + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; break; +#endif +#ifdef CONFIG_SYS_PCIE3_MEM_VIRT case 3: release_addr = CONFIG_SYS_PCIE3_MEM_VIRT + CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET; break; +#endif default: release_addr = 0; break; @@ -384,7 +388,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) /* see if we are a PCIe or PCI controller */ pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER /* boot from PCIE --master */ char *s = getenv("bootmaster"); char pcie[6]; @@ -499,13 +503,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) } #ifndef CONFIG_PCI_NOSCAN - pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &temp8); - - /* Programming Interface (PCI_CLASS_PROG) - * 0 == pci host or pcie root-complex, - * 1 == pci agent or pcie end-point - */ - if (!temp8) { + if (!fsl_is_pci_agent(hose)) { debug(" Scanning PCI bus %02x\n", hose->current_busno); hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno); @@ -543,12 +541,22 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) int fsl_is_pci_agent(struct pci_controller *hose) { - u8 prog_if; + u8 pcie_cap; pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0); - pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if); + pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); + if (pcie_cap == PCI_CAP_ID_EXP) { + u8 header_type; - return (prog_if == FSL_PROG_IF_AGENT); + pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE, + &header_type); + return (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL; + } else { + u8 prog_if; + + pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if); + return (prog_if == FSL_PROG_IF_AGENT); + } } int fsl_pci_init_port(struct fsl_pci_info *pci_info, @@ -594,7 +602,7 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, if (fsl_is_pci_agent(hose)) { fsl_pci_config_unlock(hose); hose->last_busno = hose->first_busno; -#ifdef CONFIG_FSL_CORENET +#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER } else { /* boot from PCIE --master releases slave's core 0 */ char *s = getenv("bootmaster"); @@ -618,12 +626,10 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info, void fsl_pci_config_unlock(struct pci_controller *hose) { pci_dev_t dev = PCI_BDF(hose->first_busno,0,0); - u8 agent; u8 pcie_cap; u16 pbfr; - pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &agent); - if (!agent) + if (!fsl_is_pci_agent(hose)) return; pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap); @@ -660,10 +666,17 @@ int fsl_configure_pcie(struct fsl_pci_info *info, } #if defined(CONFIG_FSL_CORENET) +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR3_PCIE1 + #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR3_PCIE2 + #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR3_PCIE3 + #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR3_PCIE4 +#else #define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR_PCIE1 #define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR_PCIE2 #define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR_PCIE3 #define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR_PCIE4 +#endif #define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR #elif defined(CONFIG_MPC85xx) #define _DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE @@ -743,34 +756,42 @@ int fsl_pcie_init_board(int busno) { struct fsl_pci_info pci_info; ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR; - u32 devdisr = in_be32(&gur->devdisr); + u32 devdisr; + u32 *addr; + +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 + addr = &gur->devdisr3; +#else + addr = &gur->devdisr; +#endif + devdisr = in_be32(addr); #ifdef CONFIG_PCIE1 SET_STD_PCIE_INFO(pci_info, 1); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE1, &pci_info); #else - setbits_be32(&gur->devdisr, _DEVDISR_PCIE1); /* disable */ + setbits_be32(addr, _DEVDISR_PCIE1); /* disable */ #endif #ifdef CONFIG_PCIE2 SET_STD_PCIE_INFO(pci_info, 2); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE2, &pci_info); #else - setbits_be32(&gur->devdisr, _DEVDISR_PCIE2); /* disable */ + setbits_be32(addr, _DEVDISR_PCIE2); /* disable */ #endif #ifdef CONFIG_PCIE3 SET_STD_PCIE_INFO(pci_info, 3); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE3, &pci_info); #else - setbits_be32(&gur->devdisr, _DEVDISR_PCIE3); /* disable */ + setbits_be32(addr, _DEVDISR_PCIE3); /* disable */ #endif #ifdef CONFIG_PCIE4 SET_STD_PCIE_INFO(pci_info, 4); busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE4, &pci_info); #else - setbits_be32(&gur->devdisr, _DEVDISR_PCIE4); /* disable */ + setbits_be32(addr, _DEVDISR_PCIE4); /* disable */ #endif return busno; diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 9f711519ed..345587be63 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -113,18 +113,21 @@ static void qe_sdma_init(void) * we just need to know what the SNUMs are for the threads. */ static u8 thread_snum[] = { +/* Evthreads 16-29 are not supported in MPC8309 */ +#if !defined(CONFIG_MPC8309) 0x04, 0x05, 0x0c, 0x0d, 0x14, 0x15, 0x1c, 0x1d, 0x24, 0x25, 0x2c, 0x2d, - 0x34, 0x35, 0x88, 0x89, - 0x98, 0x99, 0xa8, 0xa9, - 0xb8, 0xb9, 0xc8, 0xc9, - 0xd8, 0xd9, 0xe8, 0xe9, - 0x08, 0x09, 0x18, 0x19, - 0x28, 0x29, 0x38, 0x39, - 0x48, 0x49, 0x58, 0x59, - 0x68, 0x69, 0x78, 0x79, - 0x80, 0x81 + 0x34, 0x35, +#endif + 0x88, 0x89, 0x98, 0x99, + 0xa8, 0xa9, 0xb8, 0xb9, + 0xc8, 0xc9, 0xd8, 0xd9, + 0xe8, 0xe9, 0x08, 0x09, + 0x18, 0x19, 0x28, 0x29, + 0x38, 0x39, 0x48, 0x49, + 0x58, 0x59, 0x68, 0x69, + 0x78, 0x79, 0x80, 0x81 }; static void qe_snums_init(void) diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 3c32f97abb..5e8b64873d 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -36,19 +36,14 @@ COBJS-$(CONFIG_MCFUART) += mcfuart.o COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o COBJS-$(CONFIG_SYS_NS16550) += ns16550.o -COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o COBJS-$(CONFIG_S3C64XX) += s3c64xx.o COBJS-$(CONFIG_S5P) += serial_s5p.o COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o -COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o COBJS-$(CONFIG_IXP_SERIAL) += serial_ixp.o COBJS-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o -COBJS-$(CONFIG_LPC2292_SERIAL) += serial_lpc2292.o -COBJS-$(CONFIG_LH7A40X_SERIAL) += serial_lh7a40x.o COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o COBJS-$(CONFIG_MXC_UART) += serial_mxc.o -COBJS-$(CONFIG_NETARM_SERIAL) += serial_netarm.o COBJS-$(CONFIG_PL010_SERIAL) += serial_pl01x.o COBJS-$(CONFIG_PL011_SERIAL) += serial_pl01x.o COBJS-$(CONFIG_PXA_SERIAL) += serial_pxa.o diff --git a/drivers/serial/altera_jtag_uart.c b/drivers/serial/altera_jtag_uart.c index 654b5019eb..28319baf18 100644 --- a/drivers/serial/altera_jtag_uart.c +++ b/drivers/serial/altera_jtag_uart.c @@ -59,12 +59,6 @@ static void altera_jtag_serial_putc(char c) writel ((unsigned char)c, &jtag->data); } -static void altera_jtag_serial_puts(const char *s) -{ - while (*s != 0) - serial_putc (*s++); -} - static int altera_jtag_serial_tstc(void) { return ( readl (&jtag->control) & NIOS_JTAG_RRDY); @@ -91,7 +85,7 @@ static struct serial_device altera_jtag_serial_drv = { .stop = NULL, .setbrg = altera_jtag_serial_setbrg, .putc = altera_jtag_serial_putc, - .puts = altera_jtag_serial_puts, + .puts = default_serial_puts, .getc = altera_jtag_serial_getc, .tstc = altera_jtag_serial_tstc, }; diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c index 27550ed48d..118cd58ece 100644 --- a/drivers/serial/altera_uart.c +++ b/drivers/serial/altera_uart.c @@ -82,13 +82,6 @@ static void altera_serial_putc(char c) writel ((unsigned char)c, &uart->txdata); } -static void altera_serial_puts(const char *s) -{ - while (*s != 0) { - serial_putc (*s++); - } -} - static int altera_serial_tstc(void) { return (readl (&uart->status) & NIOS_UART_RRDY); @@ -107,7 +100,7 @@ static struct serial_device altera_serial_drv = { .stop = NULL, .setbrg = altera_serial_setbrg, .putc = altera_serial_putc, - .puts = altera_serial_puts, + .puts = default_serial_puts, .getc = altera_serial_getc, .tstc = altera_serial_tstc, }; diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index 130303129e..c4d7432efc 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -86,12 +86,6 @@ static void atmel_serial_putc(char c) writel(c, &usart->thr); } -static void atmel_serial_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - static int atmel_serial_getc(void) { atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE; @@ -113,7 +107,7 @@ static struct serial_device atmel_serial_drv = { .stop = NULL, .setbrg = atmel_serial_setbrg, .putc = atmel_serial_putc, - .puts = atmel_serial_puts, + .puts = default_serial_puts, .getc = atmel_serial_getc, .tstc = atmel_serial_tstc, }; diff --git a/drivers/serial/lpc32xx_hsuart.c b/drivers/serial/lpc32xx_hsuart.c index 02429b5541..7559916578 100644 --- a/drivers/serial/lpc32xx_hsuart.c +++ b/drivers/serial/lpc32xx_hsuart.c @@ -77,19 +77,13 @@ static int lpc32xx_serial_init(void) return 0; } -static void lpc32xx_serial_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - static struct serial_device lpc32xx_serial_drv = { .name = "lpc32xx_serial", .start = lpc32xx_serial_init, .stop = NULL, .setbrg = lpc32xx_serial_setbrg, .putc = lpc32xx_serial_putc, - .puts = lpc32xx_serial_puts, + .puts = default_serial_puts, .getc = lpc32xx_serial_getc, .tstc = lpc32xx_serial_tstc, }; diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c index 00a7114691..7e25797661 100644 --- a/drivers/serial/mcfuart.c +++ b/drivers/serial/mcfuart.c @@ -28,6 +28,8 @@ */ #include <common.h> +#include <serial.h> +#include <linux/compiler.h> #include <asm/immap.h> #include <asm/uart.h> @@ -87,13 +89,6 @@ static void mcf_serial_putc(const char c) uart->utb = c; } -static void mcf_serial_puts(const char *s) -{ - while (*s) { - serial_putc(*s++); - } -} - static int mcf_serial_getc(void) { volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE); @@ -136,7 +131,7 @@ static struct serial_device mcf_serial_drv = { .stop = NULL, .setbrg = mcf_serial_setbrg, .putc = mcf_serial_putc, - .puts = mcf_serial_puts, + .puts = default_serial_puts, .getc = mcf_serial_getc, .tstc = mcf_serial_tstc, }; diff --git a/drivers/serial/ns9750_serial.c b/drivers/serial/ns9750_serial.c index cb545c4065..85fc68a076 100644 --- a/drivers/serial/ns9750_serial.c +++ b/drivers/serial/ns9750_serial.c @@ -100,19 +100,6 @@ static void ns9750_serial_putc(const char c) } /*********************************************************************** - * @Function: serial_puts - * @Return: n/a - * @Descr: writes non-zero string to the FIFO. - ***********************************************************************/ - -static void ns9750_serial_puts(const char *s) -{ - while (*s) { - serial_putc( *s++ ); - } -} - -/*********************************************************************** * @Function: serial_getc * @Return: the character read * @Descr: performs only 8bit accesses to the FIFO. No error handling @@ -215,7 +202,7 @@ static struct serial_device ns9750_serial_drv = { .stop = NULL, .setbrg = ns9750_serial_setbrg, .putc = ns9750_serial_putc, - .puts = ns9750_serial_puts, + .puts = default_serial_puts, .getc = ns9750_serial_getc, .tstc = ns9750_serial_tstc, }; diff --git a/drivers/serial/opencores_yanu.c b/drivers/serial/opencores_yanu.c index 49bccf3a6c..4ca6ef0b25 100644 --- a/drivers/serial/opencores_yanu.c +++ b/drivers/serial/opencores_yanu.c @@ -161,14 +161,6 @@ static void oc_serial_putc(char c) writel((unsigned char)c, &uart->data); } -static void oc_serial_puts(const char *s) -{ - while (*s != 0) { - serial_putc (*s++); - } -} - - static int oc_serial_tstc(void) { unsigned status ; @@ -195,7 +187,7 @@ static struct serial_device oc_serial_drv = { .stop = NULL, .setbrg = oc_serial_setbrg, .putc = oc_serial_putc, - .puts = oc_serial_puts, + .puts = default_serial_puts, .getc = oc_serial_getc, .tstc = oc_serial_tstc, }; diff --git a/drivers/serial/s3c4510b_uart.c b/drivers/serial/s3c4510b_uart.c deleted file mode 100644 index 423d26e678..0000000000 --- a/drivers/serial/s3c4510b_uart.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) - * Curt Brune <curt@cucy.com> - * - * (C) Copyright 2004 - * DAVE Srl - * http://www.dave-tech.it - * http://www.wawnet.biz - * mailto:info@wawnet.biz - * - * (C) Copyright 2002-2004 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * MODULE: $Id:$ - * Description: UART/Serial interface for Samsung S3C4510B SoC - * Runtime Env: ARM7TDMI - * Change History: - * 03-02-04 Create (Curt Brune) curt@cucy.com - * - */ - -#include <common.h> - -#include <asm/hardware.h> -#include "s3c4510b_uart.h" - -DECLARE_GLOBAL_DATA_PTR; - -static UART *uart; - -/* flush serial input queue. returns 0 on success or negative error - * number otherwise - */ -static int serial_flush_input(void) -{ - volatile u32 tmp; - - /* keep on reading as long as the receiver is not empty */ - while( uart->m_stat.bf.rxReady) { - tmp = uart->m_rx; - } - - return 0; -} - - -/* flush output queue. returns 0 on success or negative error number - * otherwise - */ -static int serial_flush_output(void) -{ - /* wait until the transmitter is no longer busy */ - while( !uart->m_stat.bf.txBufEmpty); - - return 0; -} - - -static void s3c4510b_serial_setbrg(void) -{ - UART_LINE_CTRL ulctrl; - UART_CTRL uctrl; - UART_BAUD_DIV ubd; - - serial_flush_output(); - serial_flush_input(); - - /* control register */ - uctrl.ui = 0x0; - uctrl.bf.rxMode = 0x1; - uctrl.bf.rxIrq = 0x0; - uctrl.bf.txMode = 0x1; - uctrl.bf.DSR = 0x0; - uctrl.bf.sendBreak = 0x0; - uctrl.bf.loopBack = 0x0; - uart->m_ctrl.ui = uctrl.ui; - - /* line control register */ - ulctrl.ui = 0x0; - ulctrl.bf.wordLen = 0x3; /* 8 bit data */ - ulctrl.bf.nStop = 0x0; /* 1 stop bit */ - ulctrl.bf.parity = 0x0; /* no parity */ - ulctrl.bf.clk = 0x0; /* internal clock */ - ulctrl.bf.infra_red = 0x0; /* no infra_red */ - uart->m_lineCtrl.ui = ulctrl.ui; - - ubd.ui = 0x0; - - /* see table on page 10-15 in SAMSUNG S3C4510B manual */ - /* get correct divisor */ - switch(gd->baudrate) { - case 1200: ubd.bf.cnt0 = 1301; break; - case 2400: ubd.bf.cnt0 = 650; break; - case 4800: ubd.bf.cnt0 = 324; break; - case 9600: ubd.bf.cnt0 = 162; break; - case 19200: ubd.bf.cnt0 = 80; break; - case 38400: ubd.bf.cnt0 = 40; break; - case 57600: ubd.bf.cnt0 = 26; break; - case 115200: ubd.bf.cnt0 = 13; break; - } - - uart->m_baudDiv.ui = ubd.ui; - uart->m_baudCnt = 0x0; - uart->m_baudClk = 0x0; - -} - - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - * - */ -static int s3c4510b_serial_init(void) -{ - -#if CONFIG_SERIAL1 == 1 - uart = (UART *)UART0_BASE; -#elif CONFIG_SERIAL1 == 2 - uart = (UART *)UART1_BASE; -#else -#error CONFIG_SERIAL1 not equal to 1 or 2 -#endif - - serial_setbrg (); - - return (0); -} - - -/* - * Output a single byte to the serial port. - */ -static void s3c4510_serial_putc(const char c) -{ - /* wait for room in the transmit FIFO */ - while( !uart->m_stat.bf.txBufEmpty); - - uart->m_tx = c; - - /* - to be polite with serial console add a line feed - to the carriage return character - */ - if (c=='\n') - serial_putc('\r'); -} - -/* - * Test if an input byte is ready from the serial port. Returns non-zero on - * success, 0 otherwise. - */ -static int s3c4510b_serial_tstc(void) -{ - return uart->m_stat.bf.rxReady; -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int s3c4510b_serial_getc(void) -{ - int rv; - - for(;;) { - rv = serial_tstc(); - - if (rv) { - return uart->m_rx & 0xFF; - } - } -} - -static void s3c4510b_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } - - /* busy wait for tx complete */ - while ( !uart->m_stat.bf.txComplete); - - /* clear break */ - uart->m_ctrl.bf.sendBreak = 0; - -} - -static struct serial_device s3c4510b_serial_drv = { - .name = "s3c4510b_serial", - .start = s3c4510b_serial_init, - .stop = NULL, - .setbrg = s3c4510b_serial_setbrg, - .putc = s3c4510b_serial_putc, - .puts = s3c4510b_serial_puts, - .getc = s3c4510b_serial_getc, - .tstc = s3c4510b_serial_tstc, -}; - -void s3c4510b_serial_initialize(void) -{ - serial_register(&s3c4510b_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &s3c4510b_serial_drv; -} diff --git a/drivers/serial/s3c4510b_uart.h b/drivers/serial/s3c4510b_uart.h deleted file mode 100644 index b06c76d84a..0000000000 --- a/drivers/serial/s3c4510b_uart.h +++ /dev/null @@ -1,109 +0,0 @@ -#ifndef __UART_H -#define __UART_H - -/* - * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) - * Curt Brune <curt@cucy.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - * Description: S3C4510B UART register layout - */ - -/* UART LINE CONTROL register */ -typedef struct __BF_UART_LINE_CTRL { - u32 wordLen: 2; - u32 nStop: 1; - u32 parity: 3; - u32 clk: 1; - u32 infra_red: 1; - u32 unused:24; -} BF_UART_LINE_CTRL; - -typedef union _UART_LINE_CTRL { - u32 ui; - BF_UART_LINE_CTRL bf; -} UART_LINE_CTRL; - -/* UART CONTROL register */ -typedef struct __BF_UART_CTRL { - u32 rxMode: 2; - u32 rxIrq: 1; - u32 txMode: 2; - u32 DSR: 1; - u32 sendBreak: 1; - u32 loopBack: 1; - u32 unused:24; -} BF_UART_CTRL; - -typedef union _UART_CTRL { - u32 ui; - BF_UART_CTRL bf; -} UART_CTRL; - -/* UART STATUS register */ -typedef struct __BF_UART_STAT { - u32 overrun: 1; - u32 parity: 1; - u32 frame: 1; - u32 breakIrq: 1; - u32 DTR: 1; - u32 rxReady: 1; - u32 txBufEmpty: 1; - u32 txComplete: 1; - u32 unused:24; -} BF_UART_STAT; - -typedef union _UART_STAT { - u32 ui; - BF_UART_STAT bf; -} UART_STAT; - -/* UART BAUD_DIV register */ -typedef struct __BF_UART_BAUD_DIV { - u32 cnt1: 4; - u32 cnt0:12; - u32 unused:16; -} BF_UART_BAUD_DIV; - -typedef union _UART_BAUD_DIV { - u32 ui; - BF_UART_BAUD_DIV bf; -} UART_BAUD_DIV; - -/* UART register block */ -typedef struct __UART { - volatile UART_LINE_CTRL m_lineCtrl; - volatile UART_CTRL m_ctrl; - volatile UART_STAT m_stat; - volatile u32 m_tx; - volatile u32 m_rx; - volatile UART_BAUD_DIV m_baudDiv; - volatile u32 m_baudCnt; - volatile u32 m_baudClk; -} UART; - -#define NL 0x0A -#define CR 0x0D -#define BSP 0x08 -#define ESC 0x1B -#define CTRLZ 0x1A -#define RUBOUT 0x7F - -#endif diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c index 9ab8a28d83..f53c2bf003 100644 --- a/drivers/serial/s3c64xx.c +++ b/drivers/serial/s3c64xx.c @@ -40,8 +40,6 @@ DECLARE_GLOBAL_DATA_PTR; #error "Bad: you didn't configure serial ..." #endif -#define barrier() asm volatile("" ::: "memory") - /* * The coefficient, used to calculate the baudrate on S3C6400 UARTs is * calculated as @@ -166,19 +164,13 @@ static int s3c64xx_serial_tstc(void) return uart->UTRSTAT & 0x1; } -static void s3c64xx_serial_puts(const char *s) -{ - while (*s) - serial_putc(*s++); -} - static struct serial_device s3c64xx_serial_drv = { .name = "s3c64xx_serial", .start = s3c64xx_serial_init, .stop = NULL, .setbrg = s3c64xx_serial_setbrg, .putc = s3c64xx_serial_putc, - .puts = s3c64xx_serial_puts, + .puts = default_serial_puts, .getc = s3c64xx_serial_getc, .tstc = s3c64xx_serial_tstc, }; diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 5bbf3aeb44..f5f43a6ddc 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -26,16 +26,35 @@ #include <stdio_dev.h> #include <post.h> #include <linux/compiler.h> +#include <errno.h> DECLARE_GLOBAL_DATA_PTR; static struct serial_device *serial_devices; static struct serial_device *serial_current; +/** + * serial_null() - Void registration routine of a serial driver + * + * This routine implements a void registration routine of a serial + * driver. The registration routine of a particular driver is aliased + * to this empty function in case the driver is not compiled into + * U-Boot. + */ static void serial_null(void) { } +/** + * serial_initfunc() - Forward declare of driver registration routine + * @name: Name of the real driver registration routine. + * + * This macro expands onto forward declaration of a driver registration + * routine, which is then used below in serial_initialize() function. + * The declaration is made weak and aliases to serial_null() so in case + * the driver is not compiled in, the function is still declared and can + * be used, but aliases to serial_null() and thus is optimized away. + */ #define serial_initfunc(name) \ void name(void) \ __attribute__((weak, alias("serial_null"))); @@ -77,7 +96,6 @@ serial_initfunc(lpc32xx_serial_initialize); serial_initfunc(mcf_serial_initialize); serial_initfunc(ns9750_serial_initialize); serial_initfunc(oc_serial_initialize); -serial_initfunc(s3c4510b_serial_initialize); serial_initfunc(s3c64xx_serial_initialize); serial_initfunc(sandbox_serial_initialize); serial_initfunc(clps7111_serial_initialize); @@ -85,15 +103,23 @@ serial_initfunc(imx_serial_initialize); serial_initfunc(ixp_serial_initialize); serial_initfunc(ks8695_serial_initialize); serial_initfunc(lh7a40x_serial_initialize); -serial_initfunc(lpc2292_serial_initialize); serial_initfunc(max3100_serial_initialize); serial_initfunc(mxc_serial_initialize); -serial_initfunc(netarm_serial_initialize); serial_initfunc(pl01x_serial_initialize); serial_initfunc(s3c44b0_serial_initialize); serial_initfunc(sa1100_serial_initialize); serial_initfunc(sh_serial_initialize); +/** + * serial_register() - Register serial driver with serial driver core + * @dev: Pointer to the serial driver structure + * + * This function registers the serial driver supplied via @dev with + * serial driver core, thus making U-Boot aware of it and making it + * available for U-Boot to use. On platforms that still require manual + * relocation of constant variables, relocation of the supplied structure + * is performed. + */ void serial_register(struct serial_device *dev) { #ifdef CONFIG_NEEDS_MANUAL_RELOC @@ -117,6 +143,15 @@ void serial_register(struct serial_device *dev) serial_devices = dev; } +/** + * serial_initialize() - Register all compiled-in serial port drivers + * + * This function registers all serial port drivers that are compiled + * into the U-Boot binary with the serial core, thus making them + * available to U-Boot to use. Lastly, this function assigns a default + * serial port to the serial core. That serial port is then used as a + * default output. + */ void serial_initialize(void) { mpc8xx_serial_initialize(); @@ -156,7 +191,6 @@ void serial_initialize(void) mcf_serial_initialize(); ns9750_serial_initialize(); oc_serial_initialize(); - s3c4510b_serial_initialize(); s3c64xx_serial_initialize(); sandbox_serial_initialize(); clps7111_serial_initialize(); @@ -164,10 +198,8 @@ void serial_initialize(void) ixp_serial_initialize(); ks8695_serial_initialize(); lh7a40x_serial_initialize(); - lpc2292_serial_initialize(); max3100_serial_initialize(); mxc_serial_initialize(); - netarm_serial_initialize(); pl01x_serial_initialize(); s3c44b0_serial_initialize(); sa1100_serial_initialize(); @@ -176,6 +208,13 @@ void serial_initialize(void) serial_assign(default_serial_console()->name); } +/** + * serial_stdio_init() - Register serial ports with STDIO core + * + * This function generates a proxy driver for each serial port driver. + * These proxy drivers then register with the STDIO core, making the + * serial drivers available as STDIO devices. + */ void serial_stdio_init(void) { struct stdio_dev dev; @@ -200,20 +239,38 @@ void serial_stdio_init(void) } } +/** + * serial_assign() - Select the serial output device by name + * @name: Name of the serial driver to be used as default output + * + * This function configures the serial output multiplexing by + * selecting which serial device will be used as default. In case + * the STDIO "serial" device is selected as stdin/stdout/stderr, + * the serial device previously configured by this function will be + * used for the particular operation. + * + * Returns 0 on success, negative on error. + */ int serial_assign(const char *name) { struct serial_device *s; for (s = serial_devices; s; s = s->next) { - if (strcmp(s->name, name) == 0) { - serial_current = s; - return 0; - } + if (strcmp(s->name, name)) + continue; + serial_current = s; + return 0; } - return 1; + return -EINVAL; } +/** + * serial_reinit_all() - Reinitialize all compiled-in serial ports + * + * This function reinitializes all serial ports that are compiled + * into U-Boot by calling their serial_start() functions. + */ void serial_reinit_all(void) { struct serial_device *s; @@ -222,60 +279,173 @@ void serial_reinit_all(void) s->start(); } +/** + * get_current() - Return pointer to currently selected serial port + * + * This function returns a pointer to currently selected serial port. + * The currently selected serial port is altered by serial_assign() + * function. + * + * In case this function is called before relocation or before any serial + * port is configured, this function calls default_serial_console() to + * determine the serial port. Otherwise, the configured serial port is + * returned. + * + * Returns pointer to the currently selected serial port on success, + * NULL on error. + */ static struct serial_device *get_current(void) { struct serial_device *dev; - if (!(gd->flags & GD_FLG_RELOC) || !serial_current) { + if (!(gd->flags & GD_FLG_RELOC)) + dev = default_serial_console(); + else if (!serial_current) dev = default_serial_console(); + else + dev = serial_current; - /* We must have a console device */ - if (!dev) { + /* We must have a console device */ + if (!dev) { #ifdef CONFIG_SPL_BUILD - puts("Cannot find console\n"); - hang(); + puts("Cannot find console\n"); + hang(); #else - panic("Cannot find console\n"); + panic("Cannot find console\n"); #endif - } - } else - dev = serial_current; + } + return dev; } +/** + * serial_init() - Initialize currently selected serial port + * + * This function initializes the currently selected serial port. This + * usually involves setting up the registers of that particular port, + * enabling clock and such. This function uses the get_current() call + * to determine which port is selected. + * + * Returns 0 on success, negative on error. + */ int serial_init(void) { return get_current()->start(); } +/** + * serial_setbrg() - Configure baud-rate of currently selected serial port + * + * This function configures the baud-rate of the currently selected + * serial port. The baud-rate is retrieved from global data within + * the serial port driver. This function uses the get_current() call + * to determine which port is selected. + * + * Returns 0 on success, negative on error. + */ void serial_setbrg(void) { get_current()->setbrg(); } +/** + * serial_getc() - Read character from currently selected serial port + * + * This function retrieves a character from currently selected serial + * port. In case there is no character waiting on the serial port, + * this function will block and wait for the character to appear. This + * function uses the get_current() call to determine which port is + * selected. + * + * Returns the character on success, negative on error. + */ int serial_getc(void) { return get_current()->getc(); } +/** + * serial_tstc() - Test if data is available on currently selected serial port + * + * This function tests if one or more characters are available on + * currently selected serial port. This function never blocks. This + * function uses the get_current() call to determine which port is + * selected. + * + * Returns positive if character is available, zero otherwise. + */ int serial_tstc(void) { return get_current()->tstc(); } +/** + * serial_putc() - Output character via currently selected serial port + * @c: Single character to be output from the serial port. + * + * This function outputs a character via currently selected serial + * port. This character is passed to the serial port driver responsible + * for controlling the hardware. The hardware may still be in process + * of transmitting another character, therefore this function may block + * for a short amount of time. This function uses the get_current() + * call to determine which port is selected. + */ void serial_putc(const char c) { get_current()->putc(c); } +/** + * serial_puts() - Output string via currently selected serial port + * @s: Zero-terminated string to be output from the serial port. + * + * This function outputs a zero-terminated string via currently + * selected serial port. This function behaves as an accelerator + * in case the hardware can queue multiple characters for transfer. + * The whole string that is to be output is available to the function + * implementing the hardware manipulation. Transmitting the whole + * string may take some time, thus this function may block for some + * amount of time. This function uses the get_current() call to + * determine which port is selected. + */ void serial_puts(const char *s) { get_current()->puts(s); } +/** + * default_serial_puts() - Output string by calling serial_putc() in loop + * @s: Zero-terminated string to be output from the serial port. + * + * This function outputs a zero-terminated string by calling serial_putc() + * in a loop. Most drivers do not support queueing more than one byte for + * transfer, thus this function precisely implements their serial_puts(). + * + * To optimize the number of get_current() calls, this function only + * calls get_current() once and then directly accesses the putc() call + * of the &struct serial_device . + */ +void default_serial_puts(const char *s) +{ + struct serial_device *dev = get_current(); + while (*s) + dev->putc(*s++); +} + #if CONFIG_POST & CONFIG_SYS_POST_UART static const int bauds[] = CONFIG_SYS_BAUDRATE_TABLE; +/** + * uart_post_test() - Test the currently selected serial port using POST + * @flags: POST framework flags + * + * Do a loopback test of the currently selected serial port. This + * function is only useful in the context of the POST testing framwork. + * The serial port is firstly configured into loopback mode and then + * characters are sent through it. + * + * Returns 0 on success, value otherwise. + */ /* Mark weak until post/cpu/.../uart.c migrate over */ __weak int uart_post_test(int flags) diff --git a/drivers/serial/serial_clps7111.c b/drivers/serial/serial_clps7111.c deleted file mode 100644 index 65473e8608..0000000000 --- a/drivers/serial/serial_clps7111.c +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2002-2004 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> -#include <clps7111.h> - -DECLARE_GLOBAL_DATA_PTR; - -static void clps7111_serial_setbrg(void) -{ - unsigned int reg = 0; - - switch (gd->baudrate) { - case 1200: reg = 191; break; - case 9600: reg = 23; break; - case 19200: reg = 11; break; - case 38400: reg = 5; break; - case 57600: reg = 3; break; - case 115200: reg = 1; break; - default: hang (); break; - } - - /* init serial serial 1,2 */ - IO_SYSCON1 = SYSCON1_UART1EN; - IO_SYSCON2 = SYSCON2_UART2EN; - - reg |= UBRLCR_WRDLEN8; - - IO_UBRLCR1 = reg; - IO_UBRLCR2 = reg; -} - - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - * - */ -static int clps7111_serial_init(void) -{ - serial_setbrg (); - - return (0); -} - - -/* - * Output a single byte to the serial port. - */ -static void clps7111_serial_putc(const char c) -{ - int tmo; - - /* If \n, also do \r */ - if (c == '\n') - serial_putc ('\r'); - - tmo = get_timer (0) + 1 * CONFIG_SYS_HZ; - while (IO_SYSFLG1 & SYSFLG1_UTXFF) - if (get_timer (0) > tmo) - break; - - IO_UARTDR1 = c; -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int clps7111_serial_tstc(void) -{ - return !(IO_SYSFLG1 & SYSFLG1_URXFE); -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int clps7111_serial_getc(void) -{ - while (IO_SYSFLG1 & SYSFLG1_URXFE); - - return IO_UARTDR1 & 0xff; -} - -static void clps7111_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - -static struct serial_device clps7111_serial_drv = { - .name = "clps7111_serial", - .start = clps7111_serial_init, - .stop = NULL, - .setbrg = clps7111_serial_setbrg, - .putc = clps7111_serial_putc, - .puts = clps7111_serial_puts, - .getc = clps7111_serial_getc, - .tstc = clps7111_serial_tstc, -}; - -void clps7111_serial_initialize(void) -{ - serial_register(&clps7111_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &clps7111_serial_drv; -} diff --git a/drivers/serial/serial_imx.c b/drivers/serial/serial_imx.c index 6c075b5b91..9b9be44c52 100644 --- a/drivers/serial/serial_imx.c +++ b/drivers/serial/serial_imx.c @@ -214,20 +214,13 @@ static int imx_serial_tstc(void) return 1; } -static void imx_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device imx_serial_drv = { .name = "imx_serial", .start = imx_serial_init, .stop = NULL, .setbrg = imx_serial_setbrg, .putc = imx_serial_putc, - .puts = imx_serial_puts, + .puts = default_serial_puts, .getc = imx_serial_getc, .tstc = imx_serial_tstc, }; diff --git a/drivers/serial/serial_ixp.c b/drivers/serial/serial_ixp.c index c8b3658d47..09a3df4016 100644 --- a/drivers/serial/serial_ixp.c +++ b/drivers/serial/serial_ixp.c @@ -121,20 +121,13 @@ static int ixp_serial_getc(void) return (char) RBR(CONFIG_SYS_IXP425_CONSOLE) & 0xff; } -static void ixp_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device ixp_serial_drv = { .name = "ixp_serial", .start = ixp_serial_init, .stop = NULL, .setbrg = ixp_serial_setbrg, .putc = ixp_serial_putc, - .puts = ixp_serial_puts, + .puts = default_serial_puts, .getc = ixp_serial_getc, .tstc = ixp_serial_tstc, }; diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c index 60e8007201..8b1c974de9 100644 --- a/drivers/serial/serial_ks8695.c +++ b/drivers/serial/serial_ks8695.c @@ -102,13 +102,6 @@ static int ks8695_serial_tstc(void) return 0; } -static void ks8695_serial_puts(const char *s) -{ - char c; - while ((c = *s++) != 0) - serial_putc(c); -} - static int ks8695_serial_getc(void) { volatile struct ks8695uart *uartp = KS8695_UART_ADDR; @@ -124,7 +117,7 @@ static struct serial_device ks8695_serial_drv = { .stop = NULL, .setbrg = ks8695_serial_setbrg, .putc = ks8695_serial_putc, - .puts = ks8695_serial_puts, + .puts = default_serial_puts, .getc = ks8695_serial_getc, .tstc = ks8695_serial_tstc, }; diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c deleted file mode 100644 index 6c9628581b..0000000000 --- a/drivers/serial/serial_lh7a40x.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> -#include <lh7a40x.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CONSOLE_UART1) -# define UART_CONSOLE 1 -#elif defined(CONFIG_CONSOLE_UART2) -# define UART_CONSOLE 2 -#elif defined(CONFIG_CONSOLE_UART3) -# define UART_CONSOLE 3 -#else -# error "No console configured ... " -#endif - -static void lh7a40x_serial_setbrg(void) -{ - lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE); - int i; - unsigned int reg = 0; - - /* - * userguide 15.1.2.4 - * - * BAUDDIV is (UART_REF_FREQ/(16 X BAUD))-1 - * - * UART_REF_FREQ = external system clock input / 2 (Hz) - * BAUD is desired baudrate (bits/s) - * - * NOTE: we add (divisor/2) to numerator to round for - * more precision - */ - reg = (((get_PLLCLK()/2) + ((16*gd->baudrate)/2)) / (16 * gd->baudrate)) - 1; - uart->brcon = reg; - - for (i = 0; i < 100; i++); -} - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - * - */ -static int lh7a40x_serial_init(void) -{ - lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE); - - /* UART must be enabled before writing to any config registers */ - uart->con |= (UART_EN); - -#ifdef CONFIG_CONSOLE_UART1 - /* infrared disabled */ - uart->con |= UART_SIRD; -#endif - /* loopback disabled */ - uart->con &= ~(UART_LBE); - - /* modem lines and tx/rx polarities */ - uart->con &= ~(UART_MXP | UART_TXP | UART_RXP); - - /* FIFO enable, N81 */ - uart->fcon = (UART_WLEN_8 | UART_FEN | UART_STP2_1); - - /* set baudrate */ - serial_setbrg (); - - /* enable rx interrupt */ - uart->inten |= UART_RI; - - return (0); -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. When the function is succesfull, the character read is - * written into its argument c. - */ -static int lh7a40x_serial_getc(void) -{ - lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE); - - /* wait for character to arrive */ - while (uart->status & UART_RXFE); - - return(uart->data & 0xff); -} - -#ifdef CONFIG_HWFLOW -static int hwflow = 0; /* turned off by default */ -int hwflow_onoff(int on) -{ - switch(on) { - case 0: - default: - break; /* return current */ - case 1: - hwflow = 1; /* turn on */ - break; - case -1: - hwflow = 0; /* turn off */ - break; - } - return hwflow; -} -#endif - -#ifdef CONFIG_MODEM_SUPPORT -static int be_quiet = 0; -void disable_putc(void) -{ - be_quiet = 1; -} - -void enable_putc(void) -{ - be_quiet = 0; -} -#endif - - -/* - * Output a single byte to the serial port. - */ -static void lh7a40x_serial_putc(const char c) -{ - lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE); - -#ifdef CONFIG_MODEM_SUPPORT - if (be_quiet) - return; -#endif - - /* wait for room in the tx FIFO */ - while (!(uart->status & UART_TXFE)); - -#ifdef CONFIG_HWFLOW - /* Wait for CTS up */ - while(hwflow && !(uart->status & UART_CTS)); -#endif - - uart->data = c; - - /* If \n, also do \r */ - if (c == '\n') - serial_putc ('\r'); -} - -/* - * Test whether a character is in the RX buffer - */ -static int lh7a40x_serial_tstc(void) -{ - lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE); - - return(!(uart->status & UART_RXFE)); -} - -static void lh7a40x_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - -static struct serial_device lh7a40x_serial_drv = { - .name = "lh7a40x_serial", - .start = lh7a40x_serial_init, - .stop = NULL, - .setbrg = lh7a40x_serial_setbrg, - .putc = lh7a40x_serial_putc, - .puts = lh7a40x_serial_puts, - .getc = lh7a40x_serial_getc, - .tstc = lh7a40x_serial_tstc, -}; - -void lh7a40x_serial_initialize(void) -{ - serial_register(&lh7a40x_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &lh7a40x_serial_drv; -} diff --git a/drivers/serial/serial_lpc2292.c b/drivers/serial/serial_lpc2292.c deleted file mode 100644 index fcab20280e..0000000000 --- a/drivers/serial/serial_lpc2292.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * (C) Copyright 2002-2004 - * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - * - * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> -#include <asm/arch/hardware.h> - -DECLARE_GLOBAL_DATA_PTR; - -static void lpc2292_serial_setbrg(void) -{ - unsigned short divisor = 0; - - switch (gd->baudrate) { - case 1200: divisor = 3072; break; - case 9600: divisor = 384; break; - case 19200: divisor = 192; break; - case 38400: divisor = 96; break; - case 57600: divisor = 64; break; - case 115200: divisor = 32; break; - default: hang (); break; - } - - /* init serial UART0 */ - PUT8(U0LCR, 0); - PUT8(U0IER, 0); - PUT8(U0LCR, 0x80); /* DLAB=1 */ - PUT8(U0DLL, (unsigned char)(divisor & 0x00FF)); - PUT8(U0DLM, (unsigned char)(divisor >> 8)); - PUT8(U0LCR, 0x03); /* 8N1, DLAB=0 */ - PUT8(U0FCR, 1); /* Enable RX and TX FIFOs */ -} - -static int lpc2292_serial_init(void) -{ - unsigned long pinsel0; - - serial_setbrg (); - - pinsel0 = GET32(PINSEL0); - pinsel0 &= ~(0x00000003); - pinsel0 |= 5; - PUT32(PINSEL0, pinsel0); - - return (0); -} - -static void lpc2292_serial_putc(const char c) -{ - if (c == '\n') - { - while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */ - PUT8(U0THR, '\r'); - } - - while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */ - PUT8(U0THR, c); -} - -static int lpc2292_serial_getc(void) -{ - while((GET8(U0LSR) & 1) == 0); - return GET8(U0RBR); -} - -static void lpc2292_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - -/* Test if there is a byte to read */ -static int lpc2292_serial_tstc(void) -{ - return (GET8(U0LSR) & 1); -} - -static struct serial_device lpc2292_serial_drv = { - .name = "lpc2292_serial", - .start = lpc2292_serial_init, - .stop = NULL, - .setbrg = lpc2292_serial_setbrg, - .putc = lpc2292_serial_putc, - .puts = lpc2292_serial_puts, - .getc = lpc2292_serial_getc, - .tstc = lpc2292_serial_tstc, -}; - -void lpc2292_serial_initialize(void) -{ - serial_register(&lpc2292_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &lpc2292_serial_drv; -} diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index b0612f5aca..9227d64088 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -187,13 +187,6 @@ static int mxc_serial_tstc(void) return 1; } -static void mxc_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - /* * Initialise the serial port with the given baudrate. The settings * are always 8 data bits, no parity, 1 stop bit, no start bits. @@ -228,7 +221,7 @@ static struct serial_device mxc_serial_drv = { .stop = NULL, .setbrg = mxc_serial_setbrg, .putc = mxc_serial_putc, - .puts = mxc_serial_puts, + .puts = default_serial_puts, .getc = mxc_serial_getc, .tstc = mxc_serial_tstc, }; diff --git a/drivers/serial/serial_netarm.c b/drivers/serial/serial_netarm.c deleted file mode 100644 index d30adc3183..0000000000 --- a/drivers/serial/serial_netarm.c +++ /dev/null @@ -1,211 +0,0 @@ -/* - * Serial Port stuff - taken from Linux - * - * (C) Copyright 2002 - * MAZeT GmbH <www.mazet.de> - * Stephan Linz <linz@mazet.de>, <linz@li-pro.net> - * - * (c) 2004 - * IMMS gGmbH <www.imms.de> - * Thomas Elste <info@elste.org> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <common.h> -#include <asm/hardware.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define PORTA (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA)) -#if !defined(CONFIG_NETARM_NS7520) -#define PORTB (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB)) -#else -#define PORTC (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTC)) -#endif - -/* wait until transmitter is ready for another character */ -#define TXWAITRDY(registers) \ -{ \ - ulong tmo = get_timer(0) + 1 * CONFIG_SYS_HZ; \ - while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 ) { \ - if (get_timer(0) > tmo) \ - break; \ - } \ -} - - -volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(0); -volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(1); - -extern void _netarm_led_FAIL1(void); - -/* - * Setup both serial i/f with given baudrate - */ -static void netarm_serial_setbrg(void) -{ - /* set 0 ... make sure pins are configured for serial */ -#if !defined(CONFIG_NETARM_NS7520) - PORTA = PORTB = - NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); -#else - PORTA = NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); - PORTC = NETARM_GEN_PORT_CSF (0xef) | NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0); -#endif - - /* first turn em off */ - serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = 0; - - /* clear match register, we don't need it */ - serial_reg_ch1->rx_match = serial_reg_ch2->rx_match = 0; - - /* setup bit rate generator and rx buffer gap timer (1 byte only) */ - if ((gd->baudrate >= MIN_BAUD_RATE) - && (gd->baudrate <= MAX_BAUD_RATE)) { - serial_reg_ch1->bitrate = serial_reg_ch2->bitrate = - NETARM_SER_BR_X16 (gd->baudrate); - serial_reg_ch1->rx_buf_timer = serial_reg_ch2->rx_buf_timer = - 0; - serial_reg_ch1->rx_char_timer = serial_reg_ch2->rx_char_timer = - NETARM_SER_RXGAP (gd->baudrate); - } else { - hang (); - } - - /* setup port mode */ - serial_reg_ch1->ctrl_b = serial_reg_ch2->ctrl_b = - ( NETARM_SER_CTLB_RCGT_EN | - NETARM_SER_CTLB_UART_MODE); - serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = - ( NETARM_SER_CTLA_ENABLE | - NETARM_SER_CTLA_P_NONE | - /* see errata */ - NETARM_SER_CTLA_2STOP | - NETARM_SER_CTLA_8BITS | - NETARM_SER_CTLA_DTR_EN | - NETARM_SER_CTLA_RTS_EN); -} - - -/* - * Initialise the serial port with the given baudrate. The settings - * are always 8 data bits, no parity, 1 stop bit, no start bits. - */ -static int netarm_serial_init(void) -{ - serial_setbrg (); - return 0; -} - - -/* - * Output a single byte to the serial port. - */ -static void netarm_serial_putc(const char c) -{ - volatile unsigned char *fifo; - - /* If \n, also do \r */ - if (c == '\n') - serial_putc ('\r'); - - fifo = (volatile unsigned char *) &(serial_reg_ch1->fifo); - TXWAITRDY (serial_reg_ch1); - *fifo = c; -} - -/* - * Test of a single byte from the serial port. Returns 1 on success, 0 - * otherwise. - */ -static int netarm_serial_tstc(void) -{ - return serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY; -} - -/* - * Read a single byte from the serial port. Returns 1 on success, 0 - * otherwise. - */ -static int netarm_serial_getc(void) -{ - unsigned int ch_uint; - volatile unsigned int *fifo; - volatile unsigned char *fifo_char = NULL; - int buf_count = 0; - - while (!(serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY)) - /* NOP */ ; - - fifo = (volatile unsigned int *) &(serial_reg_ch1->fifo); - fifo_char = (unsigned char *) &ch_uint; - ch_uint = *fifo; - - buf_count = NETARM_SER_STATA_RXFDB (serial_reg_ch1->status_a); - switch (buf_count) { - case NETARM_SER_STATA_RXFDB_4BYTES: - buf_count = 4; - break; - case NETARM_SER_STATA_RXFDB_3BYTES: - buf_count = 3; - break; - case NETARM_SER_STATA_RXFDB_2BYTES: - buf_count = 2; - break; - case NETARM_SER_STATA_RXFDB_1BYTES: - buf_count = 1; - break; - default: - /* panic, be never here */ - break; - } - - serial_reg_ch1->status_a |= NETARM_SER_STATA_RX_CLOSED; - - return ch_uint & 0xff; -} - -static void netarm_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - -static struct serial_device netarm_serial_drv = { - .name = "netarm_serial", - .start = netarm_serial_init, - .stop = NULL, - .setbrg = netarm_serial_setbrg, - .putc = netarm_serial_putc, - .puts = netarm_serial_puts, - .getc = netarm_serial_getc, - .tstc = netarm_serial_tstc, -}; - -void netarm_serial_initialize(void) -{ - serial_register(&netarm_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &netarm_serial_drv; -} diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c index b5d12481ca..c1c0134bcb 100644 --- a/drivers/serial/serial_ns16550.c +++ b/drivers/serial/serial_ns16550.c @@ -34,7 +34,7 @@ DECLARE_GLOBAL_DATA_PTR; #if !defined(CONFIG_CONS_INDEX) -#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4) +#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 6) #error "Invalid console index value." #endif @@ -46,12 +46,16 @@ DECLARE_GLOBAL_DATA_PTR; #error "Console port 3 defined but not configured." #elif CONFIG_CONS_INDEX == 4 && !defined(CONFIG_SYS_NS16550_COM4) #error "Console port 4 defined but not configured." +#elif CONFIG_CONS_INDEX == 5 && !defined(CONFIG_SYS_NS16550_COM5) +#error "Console port 5 defined but not configured." +#elif CONFIG_CONS_INDEX == 6 && !defined(CONFIG_SYS_NS16550_COM6) +#error "Console port 6 defined but not configured." #endif /* Note: The port number specified in the functions is 1 based. * the array is 0 based. */ -static NS16550_t serial_ports[4] = { +static NS16550_t serial_ports[6] = { #ifdef CONFIG_SYS_NS16550_COM1 (NS16550_t)CONFIG_SYS_NS16550_COM1, #else @@ -68,7 +72,17 @@ static NS16550_t serial_ports[4] = { NULL, #endif #ifdef CONFIG_SYS_NS16550_COM4 - (NS16550_t)CONFIG_SYS_NS16550_COM4 + (NS16550_t)CONFIG_SYS_NS16550_COM4, +#else + NULL, +#endif +#ifdef CONFIG_SYS_NS16550_COM5 + (NS16550_t)CONFIG_SYS_NS16550_COM5, +#else + NULL, +#endif +#ifdef CONFIG_SYS_NS16550_COM6 + (NS16550_t)CONFIG_SYS_NS16550_COM6 #else NULL #endif @@ -78,21 +92,33 @@ static NS16550_t serial_ports[4] = { /* Multi serial device functions */ #define DECLARE_ESERIAL_FUNCTIONS(port) \ - int eserial##port##_init (void) {\ - int clock_divisor; \ - clock_divisor = calc_divisor(serial_ports[port-1]); \ - NS16550_init(serial_ports[port-1], clock_divisor); \ - return(0);}\ - void eserial##port##_setbrg (void) {\ - serial_setbrg_dev(port);}\ - int eserial##port##_getc (void) {\ - return serial_getc_dev(port);}\ - int eserial##port##_tstc (void) {\ - return serial_tstc_dev(port);}\ - void eserial##port##_putc (const char c) {\ - serial_putc_dev(port, c);}\ - void eserial##port##_puts (const char *s) {\ - serial_puts_dev(port, s);} + static int eserial##port##_init(void) \ + { \ + int clock_divisor; \ + clock_divisor = calc_divisor(serial_ports[port-1]); \ + NS16550_init(serial_ports[port-1], clock_divisor); \ + return 0 ; \ + } \ + static void eserial##port##_setbrg(void) \ + { \ + serial_setbrg_dev(port); \ + } \ + static int eserial##port##_getc(void) \ + { \ + return serial_getc_dev(port); \ + } \ + static int eserial##port##_tstc(void) \ + { \ + return serial_tstc_dev(port); \ + } \ + static void eserial##port##_putc(const char c) \ + { \ + serial_putc_dev(port, c); \ + } \ + static void eserial##port##_puts(const char *s) \ + { \ + serial_puts_dev(port, s); \ + } /* Serial device descriptor */ #define INIT_ESERIAL_STRUCTURE(port, __name) { \ @@ -231,6 +257,12 @@ struct serial_device eserial3_device = DECLARE_ESERIAL_FUNCTIONS(4); struct serial_device eserial4_device = INIT_ESERIAL_STRUCTURE(4, "eserial3"); +DECLARE_ESERIAL_FUNCTIONS(5); +struct serial_device eserial5_device = + INIT_ESERIAL_STRUCTURE(5, "eserial4"); +DECLARE_ESERIAL_FUNCTIONS(6); +struct serial_device eserial6_device = + INIT_ESERIAL_STRUCTURE(6, "eserial5"); __weak struct serial_device *default_serial_console(void) { @@ -242,6 +274,10 @@ __weak struct serial_device *default_serial_console(void) return &eserial3_device; #elif CONFIG_CONS_INDEX == 4 return &eserial4_device; +#elif CONFIG_CONS_INDEX == 5 + return &eserial5_device; +#elif CONFIG_CONS_INDEX == 6 + return &eserial6_device; #else #error "Bad CONFIG_CONS_INDEX." #endif @@ -261,4 +297,10 @@ void ns16550_serial_initialize(void) #if defined(CONFIG_SYS_NS16550_COM4) serial_register(&eserial4_device); #endif +#if defined(CONFIG_SYS_NS16550_COM5) + serial_register(&eserial5_device); +#endif +#if defined(CONFIG_SYS_NS16550_COM6) + serial_register(&eserial6_device); +#endif } diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index 7db7b65c3f..b331be794b 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -179,13 +179,6 @@ static void pl01x_serial_putc(const char c) pl01x_putc (CONSOLE_PORT, c); } -static void pl01x_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static int pl01x_serial_getc(void) { return pl01x_getc (CONSOLE_PORT); @@ -259,7 +252,7 @@ static struct serial_device pl01x_serial_drv = { .stop = NULL, .setbrg = pl01x_serial_setbrg, .putc = pl01x_serial_putc, - .puts = pl01x_serial_puts, + .puts = default_serial_puts, .getc = pl01x_serial_getc, .tstc = pl01x_serial_tstc, }; diff --git a/drivers/serial/serial_s3c44b0.c b/drivers/serial/serial_s3c44b0.c index a4428e0f47..9cae843088 100644 --- a/drivers/serial/serial_s3c44b0.c +++ b/drivers/serial/serial_s3c44b0.c @@ -209,20 +209,13 @@ static int s3c44b0_serial_getc(void) } } -static void s3c44b0_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device s3c44b0_serial_drv = { .name = "s3c44b0_serial", .start = s3c44b0_serial_init, .stop = NULL, .setbrg = s3c44b0_serial_setbrg, .putc = s3c44b0_serial_putc, - .puts = s3c44b0_serial_puts, + .puts = default_serial_puts, .getc = s3c44b0_serial_getc, .tstc = s3c44b0_serial_tstc, }; diff --git a/drivers/serial/serial_sa1100.c b/drivers/serial/serial_sa1100.c index c6b34db7c6..3c0f4c59fb 100644 --- a/drivers/serial/serial_sa1100.c +++ b/drivers/serial/serial_sa1100.c @@ -153,20 +153,13 @@ static int sa1100_serial_getc(void) #endif } -static void sa1100_serial_puts(const char *s) -{ - while (*s) { - serial_putc (*s++); - } -} - static struct serial_device sa1100_serial_drv = { .name = "sa1100_serial", .start = sa1100_serial_init, .stop = NULL, .setbrg = sa1100_serial_setbrg, .putc = sa1100_serial_putc, - .puts = sa1100_serial_puts, + .puts = default_serial_puts, .getc = sa1100_serial_getc, .tstc = sa1100_serial_tstc, }; diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c index 1ddfc7d87f..3c931d0212 100644 --- a/drivers/serial/serial_sh.c +++ b/drivers/serial/serial_sh.c @@ -136,13 +136,6 @@ static void sh_serial_putc(const char c) serial_raw_putc(c); } -static void sh_serial_puts(const char *s) -{ - char c; - while ((c = *s++) != 0) - serial_putc(c); -} - static int sh_serial_tstc(void) { return serial_rx_fifo_level() ? 1 : 0; @@ -196,7 +189,7 @@ static struct serial_device sh_serial_drv = { .stop = NULL, .setbrg = sh_serial_setbrg, .putc = sh_serial_putc, - .puts = sh_serial_puts, + .puts = default_serial_puts, .getc = sh_serial_getc, .tstc = sh_serial_tstc, }; diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c index a1ebd330d7..eb99e90bec 100644 --- a/drivers/spi/fsl_espi.c +++ b/drivers/spi/fsl_espi.c @@ -216,10 +216,8 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *data_out, return 1; } memcpy(buffer, cmd_buf, cmd_len); - if (cmd_len != 1) { - if (data_in == NULL) - memcpy(buffer + cmd_len, data_out, data_len); - } + if (data_in == NULL) + memcpy(buffer + cmd_len, data_out, data_len); break; case SPI_XFER_BEGIN | SPI_XFER_END: len = data_len; diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c index e40a632caa..6791a7e0ec 100644 --- a/drivers/spi/omap3_spi.c +++ b/drivers/spi/omap3_spi.c @@ -173,14 +173,13 @@ int spi_claim_bus(struct spi_slave *slave) /* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS * REVISIT: this controller could support SPI_3WIRE mode. */ -#ifdef CONFIG_AM33XX +#ifdef CONFIG_OMAP3_SPI_D0_D1_SWAPPED /* - * The reference design on AM33xx has D0 and D1 wired up opposite - * of how it has been done on previous platforms. We assume that - * custom hardware will also follow this convention. + * Some boards have D0 wired as MOSI / D1 as MISO instead of + * The normal D0 as MISO / D1 as MOSI. */ - conf &= OMAP3_MCSPI_CHCONF_DPE0; - conf |= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1); + conf &= ~OMAP3_MCSPI_CHCONF_DPE0; + conf |= OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1; #else conf &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1); conf |= OMAP3_MCSPI_CHCONF_DPE0; diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 1e187e5b52..8b24e00e27 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -1978,8 +1978,8 @@ static int is_eth_addr_valid(char *str) p = q; } - if (i == 6) /* it looks ok */ - return 1; + /* Now check the contents. */ + return is_valid_ether_addr(ea); } return 0; } diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h index 5d7b638b38..02cae0fc75 100644 --- a/drivers/usb/gadget/gadget_chips.h +++ b/drivers/usb/gadget/gadget_chips.h @@ -58,12 +58,6 @@ #define gadget_is_sa1100(g) 0 #endif -#ifdef CONFIG_USB_GADGET_LH7A40X -#define gadget_is_lh7a40x(g) (!strcmp("lh7a40x_udc", (g)->name)) -#else -#define gadget_is_lh7a40x(g) 0 -#endif - /* handhelds.org tree (?) */ #ifdef CONFIG_USB_GADGET_MQ11XX #define gadget_is_mq11xx(g) (!strcmp("mq11xx_udc", (g)->name)) @@ -195,33 +189,31 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget) return 0x07; else if (gadget_is_omap(gadget)) return 0x08; - else if (gadget_is_lh7a40x(gadget)) - return 0x09; else if (gadget_is_n9604(gadget)) - return 0x10; + return 0x09; else if (gadget_is_pxa27x(gadget)) - return 0x11; + return 0x10; else if (gadget_is_s3c2410(gadget)) - return 0x12; + return 0x11; else if (gadget_is_at91(gadget)) - return 0x13; + return 0x12; else if (gadget_is_imx(gadget)) - return 0x14; + return 0x13; else if (gadget_is_musbhsfc(gadget)) - return 0x15; + return 0x14; else if (gadget_is_musbhdrc(gadget)) - return 0x16; + return 0x15; else if (gadget_is_mpc8272(gadget)) - return 0x17; + return 0x16; else if (gadget_is_atmel_usba(gadget)) - return 0x18; + return 0x17; else if (gadget_is_fsl_usb2(gadget)) - return 0x19; + return 0x18; else if (gadget_is_amd5536udc(gadget)) - return 0x20; + return 0x19; else if (gadget_is_m66592(gadget)) - return 0x21; + return 0x20; else if (gadget_is_mv(gadget)) - return 0x22; + return 0x21; return -ENOENT; } diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index bcb4662c47..6c94794929 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -33,6 +33,7 @@ COBJS-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o COBJS-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o COBJS-$(CONFIG_USB_S3C64XX) += s3c64xx-hcd.o COBJS-$(CONFIG_USB_SL811HS) += sl811-hcd.o +COBJS-$(CONFIG_USB_OHCI_S3C24XX) += ohci-s3c24xx.o # echi COBJS-$(CONFIG_USB_EHCI) += ehci-hcd.o diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 7b8f033b03..f54b408966 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -30,6 +30,18 @@ #include "ehci.h" +/* Check USB PHY clock valid */ +static int usb_phy_clk_valid(struct usb_ehci *ehci) +{ + if (!((in_be32(&ehci->control) & PHY_CLK_VALID) || + in_be32(&ehci->prictrl))) { + printf("USB PHY clock invalid!\n"); + return 0; + } else { + return 1; + } +} + /* * Create the appropriate control structures to manage * a new EHCI host controller. @@ -82,18 +94,16 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) udelay(1000); /* delay required for PHY Clk to appear */ #endif out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI); + setbits_be32(&ehci->control, USB_EN); } else { -#if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY) - clrbits_be32(&ehci->control, UTMI_PHY_EN); setbits_be32(&ehci->control, PHY_CLK_SEL_ULPI); + clrsetbits_be32(&ehci->control, UTMI_PHY_EN, USB_EN); udelay(1000); /* delay required for PHY Clk to appear */ -#endif + if (!usb_phy_clk_valid(ehci)) + return -EINVAL; out_le32(&(*hcor)->or_portsc[0], PORT_PTS_ULPI); } - /* Enable interface. */ - setbits_be32(&ehci->control, USB_EN); - out_be32(&ehci->prictrl, 0x0000000c); out_be32(&ehci->age_cnt_limit, 0x00000040); out_be32(&ehci->sictrl, 0x00000001); diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c b/drivers/usb/host/ohci-s3c24xx.c index 944bb32f57..03cd4c3d2a 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c +++ b/drivers/usb/host/ohci-s3c24xx.c @@ -42,7 +42,7 @@ #include <asm/io.h> #include <malloc.h> #include <usb.h> -#include "usb_ohci.h" +#include "ohci-s3c24xx.h" #define OHCI_USE_NPS /* force NoPowerSwitching mode */ #undef OHCI_VERBOSE_DEBUG /* not always helpful */ @@ -1755,3 +1755,47 @@ int usb_lowlevel_stop(int index) } #endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0) */ + +#if defined(CONFIG_USB_OHCI_NEW) && \ + defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \ + defined(CONFIG_S3C24X0) + +int usb_cpu_init(void) +{ + struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); + struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); + + /* + * Set the 48 MHz UPLL clocking. Values are taken from + * "PLL value selection guide", 6-23, s3c2400_UM.pdf. + */ + writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon); + /* 1 = use pads related USB for USB host */ + writel(readl(&gpio->misccr) | 0x8, &gpio->misccr); + + /* + * Enable USB host clock. + */ + writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon); + + return 0; +} + +int usb_cpu_stop(void) +{ + struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); + /* may not want to do this */ + writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon); + return 0; +} + +int usb_cpu_init_fail(void) +{ + struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power(); + writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon); + return 0; +} + +#endif /* defined(CONFIG_USB_OHCI_NEW) && \ + defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \ + defined(CONFIG_S3C24X0) */ diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.h b/drivers/usb/host/ohci-s3c24xx.h index f272d78859..f272d78859 100644 --- a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.h +++ b/drivers/usb/host/ohci-s3c24xx.h diff --git a/drivers/usb/musb/musb_udc.c b/drivers/usb/musb/musb_udc.c index 09cdec31a9..e0b4217dc3 100644 --- a/drivers/usb/musb/musb_udc.c +++ b/drivers/usb/musb/musb_udc.c @@ -640,8 +640,17 @@ static void musb_peri_ep0(void) static void musb_peri_rx_ep(unsigned int ep) { - u16 peri_rxcount = readw(&musbr->ep[ep].epN.rxcount); + u16 peri_rxcount; + u8 peri_rxcsr = readw(&musbr->ep[ep].epN.rxcsr); + if (!(peri_rxcsr & MUSB_RXCSR_RXPKTRDY)) { + if (debug_level > 0) + serial_printf("ERROR : %s %d without MUSB_RXCSR_RXPKTRDY set\n", + __PRETTY_FUNCTION__, ep); + return; + } + + peri_rxcount = readw(&musbr->ep[ep].epN.rxcount); if (peri_rxcount) { struct usb_endpoint_instance *endpoint; u32 length; diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index 9f7794fe53..9c67b63bf4 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -385,6 +385,13 @@ static u32 eorx, fgx, bgx; /* color pats */ static int cfb_do_flush_cache; +#ifdef CONFIG_CFB_CONSOLE_ANSI +static char ansi_buf[10]; +static int ansi_buf_size; +static int ansi_colors_need_revert; +static int ansi_cursor_hidden; +#endif + static const int video_font_draw_table8[] = { 0x00000000, 0x000000ff, 0x0000ff00, 0x0000ffff, 0x00ff0000, 0x00ff00ff, 0x00ffff00, 0x00ffffff, @@ -768,9 +775,97 @@ static void console_back(void) } } -static void console_newline(void) +#ifdef CONFIG_CFB_CONSOLE_ANSI + +static void console_clear(void) +{ +#ifdef VIDEO_HW_RECTFILL + video_hw_rectfill(VIDEO_PIXEL_SIZE, /* bytes per pixel */ + 0, /* dest pos x */ + video_logo_height, /* dest pos y */ + VIDEO_VISIBLE_COLS, /* frame width */ + VIDEO_VISIBLE_ROWS, /* frame height */ + bgx /* fill color */ + ); +#else + memsetl(CONSOLE_ROW_FIRST, CONSOLE_SIZE, bgx); +#endif +} + +static void console_cursor_fix(void) +{ + if (console_row < 0) + console_row = 0; + if (console_row >= CONSOLE_ROWS) + console_row = CONSOLE_ROWS - 1; + if (console_col < 0) + console_col = 0; + if (console_col >= CONSOLE_COLS) + console_col = CONSOLE_COLS - 1; +} + +static void console_cursor_up(int n) +{ + console_row -= n; + console_cursor_fix(); +} + +static void console_cursor_down(int n) +{ + console_row += n; + console_cursor_fix(); +} + +static void console_cursor_left(int n) +{ + console_col -= n; + console_cursor_fix(); +} + +static void console_cursor_right(int n) +{ + console_col += n; + console_cursor_fix(); +} + +static void console_cursor_set_position(int row, int col) +{ + if (console_row != -1) + console_row = row; + if (console_col != -1) + console_col = col; + console_cursor_fix(); +} + +static void console_previousline(int n) { - console_row++; + /* FIXME: also scroll terminal ? */ + console_row -= n; + console_cursor_fix(); +} + +static void console_swap_colors(void) +{ + eorx = fgx; + fgx = bgx; + bgx = eorx; + eorx = fgx ^ bgx; +} + +static inline int console_cursor_is_visible(void) +{ + return !ansi_cursor_hidden; +} +#else +static inline int console_cursor_is_visible(void) +{ + return 1; +} +#endif + +static void console_newline(int n) +{ + console_row += n; console_col = 0; /* Check if we need to scroll the terminal */ @@ -779,7 +874,7 @@ static void console_newline(void) console_scrollup(); /* Decrement row number */ - console_row--; + console_row = CONSOLE_ROWS - 1; } } @@ -788,11 +883,12 @@ static void console_cr(void) console_col = 0; } -void video_putc(const char c) +static void parse_putc(const char c) { static int nl = 1; - CURSOR_OFF; + if (console_cursor_is_visible()) + CURSOR_OFF; switch (c) { case 13: /* back to first column */ @@ -801,7 +897,7 @@ void video_putc(const char c) case '\n': /* next line */ if (console_col || (!console_col && nl)) - console_newline(); + console_newline(1); nl = 1; break; @@ -810,7 +906,7 @@ void video_putc(const char c) console_col &= ~0x0007; if (console_col >= CONSOLE_COLS) - console_newline(); + console_newline(1); break; case 8: /* backspace */ @@ -827,11 +923,225 @@ void video_putc(const char c) /* check for newline */ if (console_col >= CONSOLE_COLS) { - console_newline(); + console_newline(1); nl = 0; } } - CURSOR_SET; + + if (console_cursor_is_visible()) + CURSOR_SET; +} + +void video_putc(const char c) +{ +#ifdef CONFIG_CFB_CONSOLE_ANSI + int i; + + if (c == 27) { + for (i = 0; i < ansi_buf_size; ++i) + parse_putc(ansi_buf[i]); + ansi_buf[0] = 27; + ansi_buf_size = 1; + return; + } + + if (ansi_buf_size > 0) { + /* + * 0 - ESC + * 1 - [ + * 2 - num1 + * 3 - .. + * 4 - ; + * 5 - num2 + * 6 - .. + * - cchar + */ + int next = 0; + + int flush = 0; + int fail = 0; + + int num1 = 0; + int num2 = 0; + int cchar = 0; + + ansi_buf[ansi_buf_size++] = c; + + if (ansi_buf_size >= sizeof(ansi_buf)) + fail = 1; + + for (i = 0; i < ansi_buf_size; ++i) { + if (fail) + break; + + switch (next) { + case 0: + if (ansi_buf[i] == 27) + next = 1; + else + fail = 1; + break; + + case 1: + if (ansi_buf[i] == '[') + next = 2; + else + fail = 1; + break; + + case 2: + if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') { + num1 = ansi_buf[i]-'0'; + next = 3; + } else if (ansi_buf[i] != '?') { + --i; + num1 = 1; + next = 4; + } + break; + + case 3: + if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') { + num1 *= 10; + num1 += ansi_buf[i]-'0'; + } else { + --i; + next = 4; + } + break; + + case 4: + if (ansi_buf[i] != ';') { + --i; + next = 7; + } else + next = 5; + break; + + case 5: + if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') { + num2 = ansi_buf[i]-'0'; + next = 6; + } else + fail = 1; + break; + + case 6: + if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') { + num2 *= 10; + num2 += ansi_buf[i]-'0'; + } else { + --i; + next = 7; + } + break; + + case 7: + if ((ansi_buf[i] >= 'A' && ansi_buf[i] <= 'H') + || ansi_buf[i] == 'J' + || ansi_buf[i] == 'K' + || ansi_buf[i] == 'h' + || ansi_buf[i] == 'l' + || ansi_buf[i] == 'm') { + cchar = ansi_buf[i]; + flush = 1; + } else + fail = 1; + break; + } + } + + if (fail) { + for (i = 0; i < ansi_buf_size; ++i) + parse_putc(ansi_buf[i]); + ansi_buf_size = 0; + return; + } + + if (flush) { + if (!ansi_cursor_hidden) + CURSOR_OFF; + ansi_buf_size = 0; + switch (cchar) { + case 'A': + /* move cursor num1 rows up */ + console_cursor_up(num1); + break; + case 'B': + /* move cursor num1 rows down */ + console_cursor_down(num1); + break; + case 'C': + /* move cursor num1 columns forward */ + console_cursor_right(num1); + break; + case 'D': + /* move cursor num1 columns back */ + console_cursor_left(num1); + break; + case 'E': + /* move cursor num1 rows up at begin of row */ + console_previousline(num1); + break; + case 'F': + /* move cursor num1 rows down at begin of row */ + console_newline(num1); + break; + case 'G': + /* move cursor to column num1 */ + console_cursor_set_position(-1, num1-1); + break; + case 'H': + /* move cursor to row num1, column num2 */ + console_cursor_set_position(num1-1, num2-1); + break; + case 'J': + /* clear console and move cursor to 0, 0 */ + console_clear(); + console_cursor_set_position(0, 0); + break; + case 'K': + /* clear line */ + if (num1 == 0) + console_clear_line(console_row, + console_col, + CONSOLE_COLS-1); + else if (num1 == 1) + console_clear_line(console_row, + 0, console_col); + else + console_clear_line(console_row, + 0, CONSOLE_COLS-1); + break; + case 'h': + ansi_cursor_hidden = 0; + break; + case 'l': + ansi_cursor_hidden = 1; + break; + case 'm': + if (num1 == 0) { /* reset swapped colors */ + if (ansi_colors_need_revert) { + console_swap_colors(); + ansi_colors_need_revert = 0; + } + } else if (num1 == 7) { /* once swap colors */ + if (!ansi_colors_need_revert) { + console_swap_colors(); + ansi_colors_need_revert = 1; + } + } + break; + } + if (!ansi_cursor_hidden) + CURSOR_SET; + } + } else { + parse_putc(c); + } +#else + parse_putc(c); +#endif } void video_puts(const char *s) diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 5579bf2f14..923acb9f3a 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -27,6 +27,7 @@ LIB := $(obj)libwatchdog.o COBJS-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o COBJS-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o +COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/arch/arm/cpu/arm1176/tnetv107x/wdt.c b/drivers/watchdog/tnetv107x_wdt.c index 18aadb0c65..18aadb0c65 100644 --- a/arch/arm/cpu/arm1176/tnetv107x/wdt.c +++ b/drivers/watchdog/tnetv107x_wdt.c diff --git a/board/siemens/common/fpga.h b/examples/standalone/mips64.lds index 2de25b0146..9b27ef4769 100644 --- a/board/siemens/common/fpga.h +++ b/examples/standalone/mips64.lds @@ -1,6 +1,6 @@ /* - * (C) Copyright 2002 - * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. + * (C) Copyright 2003 + * Wolfgang Denk Engineering, <wd@denx.de> * * See file CREDITS for list of people who contributed to this * project. @@ -21,33 +21,39 @@ * MA 02111-1307 USA */ +/* +OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips") +*/ +OUTPUT_FORMAT("elf64-tradbigmips", "elf64-tradbigmips", "elf64-tradlittlemips") +OUTPUT_ARCH(mips) +SECTIONS +{ + .text : + { + *(.text*) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } -#ifndef _FPGA_H_ -#define _FPGA_H_ + . = ALIGN(4); + .data : { *(.data*) } -#define FPGA_INIT_IS_HIGH 0 -#define FPGA_INIT_SET_HIGH 1 -#define FPGA_INIT_SET_LOW 2 -#define FPGA_PROG_SET_HIGH 3 -#define FPGA_PROG_SET_LOW 4 -#define FPGA_DONE_IS_HIGH 5 -#define FPGA_READ_MODE 6 -#define FPGA_LOAD_MODE 7 -#define FPGA_GET_ID 8 -#define FPGA_INIT_PORTS 9 + . = .; + _gp = ALIGN(16) + 0x7ff0; -#define FPGA_NAME_LEN 8 -typedef struct { - char name[FPGA_NAME_LEN]; - ulong conf_base; - uint init_mask; - uint prog_mask; - uint done_mask; -} fpga_t; + .got : { + __got_start = .; + *(.got) + __got_end = .; + } -extern fpga_t fpga_list[]; -extern int fpga_count; + .sdata : { *(.sdata*) } -ulong fpga_control (fpga_t* fpga, int cmd); + . = ALIGN(4); + __bss_start = .; + .sbss (NOLOAD) : { *(.sbss*) } + .bss (NOLOAD) : { *(.bss*) . = ALIGN(4); } -#endif /* _FPGA_H_ */ + _end = .; +} diff --git a/examples/standalone/sparc.lds b/examples/standalone/sparc.lds index 9733daa86b..646b80f2d3 100644 --- a/examples/standalone/sparc.lds +++ b/examples/standalone/sparc.lds @@ -46,6 +46,7 @@ SECTIONS { *(.data) } + . = ALIGN(4); __data_end = .; diff --git a/fs/Makefile b/fs/Makefile index 901e1894b6..d0ab3aec56 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -1,6 +1,7 @@ # # (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. # # See file CREDITS for list of people who contributed to this # project. @@ -20,23 +21,27 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -# -subdirs-$(CONFIG_CMD_CRAMFS) := cramfs -subdirs-$(CONFIG_CMD_EXT4) += ext4 -ifndef CONFIG_CMD_EXT4 -subdirs-$(CONFIG_CMD_EXT2) += ext4 -endif -subdirs-$(CONFIG_CMD_FAT) += fat -subdirs-$(CONFIG_CMD_FDOS) += fdos -subdirs-$(CONFIG_CMD_JFFS2) += jffs2 -subdirs-$(CONFIG_CMD_REISER) += reiserfs -subdirs-$(CONFIG_YAFFS2) += yaffs2 -subdirs-$(CONFIG_CMD_UBIFS) += ubifs -subdirs-$(CONFIG_CMD_ZFS) += zfs - -SUBDIRS := $(subdirs-y) - -$(obj).depend all: - @for dir in $(SUBDIRS) ; do \ - $(MAKE) -C $$dir $@ ; done +include $(TOPDIR)/config.mk + +LIB = $(obj)libfs.o + +COBJS-y += fs.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/etx094/Makefile b/fs/cbfs/Makefile index 6dc495c361..2be8a6880b 100644 --- a/board/etx094/Makefile +++ b/fs/cbfs/Makefile @@ -1,7 +1,4 @@ # -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# # See file CREDITS for list of people who contributed to this # project. # @@ -23,17 +20,19 @@ include $(TOPDIR)/config.mk -LIB = $(obj)lib$(BOARD).o +LIB = $(obj)libcbfs.o + +COBJS-$(CONFIG_CMD_CBFS) := cbfs.o -COBJS = $(BOARD).o flash.o +SRCS := $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) +all: $(LIB) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) + ######################################################################### # defines $(obj).depend target diff --git a/fs/cbfs/cbfs.c b/fs/cbfs/cbfs.c new file mode 100644 index 0000000000..cae6d56db7 --- /dev/null +++ b/fs/cbfs/cbfs.c @@ -0,0 +1,339 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <cbfs.h> +#include <malloc.h> +#include <asm/byteorder.h> + +enum cbfs_result file_cbfs_result; + +const char *file_cbfs_error(void) +{ + switch (file_cbfs_result) { + case CBFS_SUCCESS: + return "Success"; + case CBFS_NOT_INITIALIZED: + return "CBFS not initialized"; + case CBFS_BAD_HEADER: + return "Bad CBFS header"; + case CBFS_BAD_FILE: + return "Bad CBFS file"; + case CBFS_FILE_NOT_FOUND: + return "File not found"; + default: + return "Unknown"; + } +} + + +static const u32 good_magic = 0x4f524243; +static const u8 good_file_magic[] = "LARCHIVE"; + + +static int initialized; +static struct cbfs_header cbfs_header; +static struct cbfs_cachenode *file_cache; + +/* Do endian conversion on the CBFS header structure. */ +static void swap_header(struct cbfs_header *dest, struct cbfs_header *src) +{ + dest->magic = be32_to_cpu(src->magic); + dest->version = be32_to_cpu(src->version); + dest->rom_size = be32_to_cpu(src->rom_size); + dest->boot_block_size = be32_to_cpu(src->boot_block_size); + dest->align = be32_to_cpu(src->align); + dest->offset = be32_to_cpu(src->offset); +} + +/* Do endian conversion on a CBFS file header. */ +static void swap_file_header(struct cbfs_fileheader *dest, + const struct cbfs_fileheader *src) +{ + memcpy(&dest->magic, &src->magic, sizeof(dest->magic)); + dest->len = be32_to_cpu(src->len); + dest->type = be32_to_cpu(src->type); + dest->checksum = be32_to_cpu(src->checksum); + dest->offset = be32_to_cpu(src->offset); +} + +/* + * Given a starting position in memory, scan forward, bounded by a size, and + * find the next valid CBFS file. No memory is allocated by this function. The + * caller is responsible for allocating space for the new file structure. + * + * @param start The location in memory to start from. + * @param size The size of the memory region to search. + * @param align The alignment boundaries to check on. + * @param newNode A pointer to the file structure to load. + * @param used A pointer to the count of of bytes scanned through, + * including the file if one is found. + * + * @return 1 if a file is found, 0 if one isn't. + */ +static int file_cbfs_next_file(u8 *start, u32 size, u32 align, + struct cbfs_cachenode *newNode, u32 *used) +{ + struct cbfs_fileheader header; + + *used = 0; + + while (size >= align) { + const struct cbfs_fileheader *fileHeader = + (const struct cbfs_fileheader *)start; + u32 name_len; + u32 step; + + /* Check if there's a file here. */ + if (memcmp(good_file_magic, &(fileHeader->magic), + sizeof(fileHeader->magic))) { + *used += align; + size -= align; + start += align; + continue; + } + + swap_file_header(&header, fileHeader); + if (header.offset < sizeof(const struct cbfs_cachenode *) || + header.offset > header.len) { + file_cbfs_result = CBFS_BAD_FILE; + return -1; + } + newNode->next = NULL; + newNode->type = header.type; + newNode->data = start + header.offset; + newNode->data_length = header.len; + name_len = header.offset - sizeof(struct cbfs_cachenode *); + newNode->name = (char *)fileHeader + + sizeof(struct cbfs_cachenode *); + newNode->name_length = name_len; + newNode->checksum = header.checksum; + + step = header.len; + if (step % align) + step = step + align - step % align; + + *used += step; + return 1; + } + return 0; +} + +/* Look through a CBFS instance and copy file metadata into regular memory. */ +static void file_cbfs_fill_cache(u8 *start, u32 size, u32 align) +{ + struct cbfs_cachenode *cache_node; + struct cbfs_cachenode *newNode; + struct cbfs_cachenode **cache_tail = &file_cache; + + /* Clear out old information. */ + cache_node = file_cache; + while (cache_node) { + struct cbfs_cachenode *oldNode = cache_node; + cache_node = cache_node->next; + free(oldNode); + } + file_cache = NULL; + + while (size >= align) { + int result; + u32 used; + + newNode = (struct cbfs_cachenode *) + malloc(sizeof(struct cbfs_cachenode)); + result = file_cbfs_next_file(start, size, align, + newNode, &used); + + if (result < 0) { + free(newNode); + return; + } else if (result == 0) { + free(newNode); + break; + } + *cache_tail = newNode; + cache_tail = &newNode->next; + + size -= used; + start += used; + } + file_cbfs_result = CBFS_SUCCESS; +} + +/* Get the CBFS header out of the ROM and do endian conversion. */ +static int file_cbfs_load_header(uintptr_t end_of_rom, + struct cbfs_header *header) +{ + struct cbfs_header *header_in_rom; + + header_in_rom = (struct cbfs_header *)(uintptr_t) + *(u32 *)(end_of_rom - 3); + swap_header(header, header_in_rom); + + if (header->magic != good_magic || header->offset > + header->rom_size - header->boot_block_size) { + file_cbfs_result = CBFS_BAD_HEADER; + return 1; + } + return 0; +} + +void file_cbfs_init(uintptr_t end_of_rom) +{ + u8 *start_of_rom; + initialized = 0; + + if (file_cbfs_load_header(end_of_rom, &cbfs_header)) + return; + + start_of_rom = (u8 *)(end_of_rom + 1 - cbfs_header.rom_size); + + file_cbfs_fill_cache(start_of_rom + cbfs_header.offset, + cbfs_header.rom_size, cbfs_header.align); + if (file_cbfs_result == CBFS_SUCCESS) + initialized = 1; +} + +const struct cbfs_header *file_cbfs_get_header(void) +{ + if (initialized) { + file_cbfs_result = CBFS_SUCCESS; + return &cbfs_header; + } else { + file_cbfs_result = CBFS_NOT_INITIALIZED; + return NULL; + } +} + +const struct cbfs_cachenode *file_cbfs_get_first(void) +{ + if (!initialized) { + file_cbfs_result = CBFS_NOT_INITIALIZED; + return NULL; + } else { + file_cbfs_result = CBFS_SUCCESS; + return file_cache; + } +} + +void file_cbfs_get_next(const struct cbfs_cachenode **file) +{ + if (!initialized) { + file_cbfs_result = CBFS_NOT_INITIALIZED; + file = NULL; + return; + } + + if (*file) + *file = (*file)->next; + file_cbfs_result = CBFS_SUCCESS; +} + +const struct cbfs_cachenode *file_cbfs_find(const char *name) +{ + struct cbfs_cachenode *cache_node = file_cache; + + if (!initialized) { + file_cbfs_result = CBFS_NOT_INITIALIZED; + return NULL; + } + + while (cache_node) { + if (!strcmp(name, cache_node->name)) + break; + cache_node = cache_node->next; + } + if (!cache_node) + file_cbfs_result = CBFS_FILE_NOT_FOUND; + else + file_cbfs_result = CBFS_SUCCESS; + + return cache_node; +} + +const struct cbfs_cachenode *file_cbfs_find_uncached(uintptr_t end_of_rom, + const char *name) +{ + u8 *start; + u32 size; + u32 align; + static struct cbfs_cachenode node; + + if (file_cbfs_load_header(end_of_rom, &cbfs_header)) + return NULL; + + start = (u8 *)(end_of_rom + 1 - cbfs_header.rom_size); + size = cbfs_header.rom_size; + align = cbfs_header.align; + + while (size >= align) { + int result; + u32 used; + + result = file_cbfs_next_file(start, size, align, &node, &used); + + if (result < 0) + return NULL; + else if (result == 0) + break; + + if (!strcmp(name, node.name)) + return &node; + + size -= used; + start += used; + } + file_cbfs_result = CBFS_FILE_NOT_FOUND; + return NULL; +} + +const char *file_cbfs_name(const struct cbfs_cachenode *file) +{ + file_cbfs_result = CBFS_SUCCESS; + return file->name; +} + +u32 file_cbfs_size(const struct cbfs_cachenode *file) +{ + file_cbfs_result = CBFS_SUCCESS; + return file->data_length; +} + +u32 file_cbfs_type(const struct cbfs_cachenode *file) +{ + file_cbfs_result = CBFS_SUCCESS; + return file->type; +} + +long file_cbfs_read(const struct cbfs_cachenode *file, void *buffer, + unsigned long maxsize) +{ + u32 size; + + size = file->data_length; + if (maxsize && size > maxsize) + size = maxsize; + + memcpy(buffer, file->data, size); + + file_cbfs_result = CBFS_SUCCESS; + return size; +} diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile index 82cd9ae16a..bb801f9054 100644 --- a/fs/ext4/Makefile +++ b/fs/ext4/Makefile @@ -30,11 +30,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)libext4fs.o AOBJS = -COBJS-$(CONFIG_CMD_EXT4) := ext4fs.o ext4_common.o dev.o -ifndef CONFIG_CMD_EXT4 -COBJS-$(CONFIG_CMD_EXT2) := ext4fs.o ext4_common.o dev.o -endif -COBJS-$(CONFIG_CMD_EXT4_WRITE) += ext4_journal.o crc16.o +COBJS-$(CONFIG_FS_EXT4) := ext4fs.o ext4_common.o dev.o +COBJS-$(CONFIG_EXT4_WRITE) += ext4_journal.o crc16.o SRCS := $(AOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(AOBJS) $(COBJS-y)) diff --git a/fs/ext4/ext4_common.c b/fs/ext4/ext4_common.c index d6d55b9fff..323875fa94 100644 --- a/fs/ext4/ext4_common.c +++ b/fs/ext4/ext4_common.c @@ -56,7 +56,7 @@ int ext4fs_indir3_blkno = -1; struct ext2_inode *g_parent_inode; static int symlinknest; -#if defined(CONFIG_CMD_EXT4_WRITE) +#if defined(CONFIG_EXT4_WRITE) uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n) { uint32_t res = size / n; diff --git a/fs/ext4/ext4_common.h b/fs/ext4/ext4_common.h index f728134186..87cab168ee 100644 --- a/fs/ext4/ext4_common.h +++ b/fs/ext4/ext4_common.h @@ -37,7 +37,7 @@ #include <ext4fs.h> #include <malloc.h> #include <asm/errno.h> -#if defined(CONFIG_CMD_EXT4_WRITE) +#if defined(CONFIG_EXT4_WRITE) #include "ext4_journal.h" #include "crc16.h" #endif @@ -71,7 +71,7 @@ int ext4fs_find_file(const char *path, struct ext2fs_node *rootnode, int ext4fs_iterate_dir(struct ext2fs_node *dir, char *name, struct ext2fs_node **fnode, int *ftype); -#if defined(CONFIG_CMD_EXT4_WRITE) +#if defined(CONFIG_EXT4_WRITE) uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n); int ext4fs_checksum_update(unsigned int i); int ext4fs_get_parent_inode_num(const char *dirname, char *dname, int flags); diff --git a/fs/ext4/ext4fs.c b/fs/ext4/ext4fs.c index 3a5ef20a4b..06536baf62 100644 --- a/fs/ext4/ext4fs.c +++ b/fs/ext4/ext4fs.c @@ -196,7 +196,7 @@ int ext4fs_read(char *buf, unsigned len) return ext4fs_read_file(ext4fs_file, 0, len, buf); } -#if defined(CONFIG_CMD_EXT4_WRITE) +#if defined(CONFIG_EXT4_WRITE) static void ext4fs_update(void) { short i; diff --git a/fs/fat/Makefile b/fs/fat/Makefile index 02e6881670..969715bf9c 100644 --- a/fs/fat/Makefile +++ b/fs/fat/Makefile @@ -24,11 +24,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)libfat.o AOBJS = -COBJS-$(CONFIG_CMD_FAT) := fat.o +COBJS-$(CONFIG_FS_FAT) := fat.o COBJS-$(CONFIG_FAT_WRITE):= fat_write.o ifndef CONFIG_SPL_BUILD -COBJS-$(CONFIG_CMD_FAT) += file.o +COBJS-$(CONFIG_FS_FAT) += file.o endif SRCS := $(AOBJS:.o=.S) $(COBJS-y:.o=.c) diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 80156c815f..393c3781eb 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -46,7 +46,6 @@ static void downcase(char *str) } static block_dev_desc_t *cur_dev; -static unsigned int cur_part_nr; static disk_partition_t cur_part_info; #define DOS_BOOT_MAGIC_OFFSET 0x1fe @@ -62,43 +61,12 @@ static int disk_read(__u32 block, __u32 nr_blocks, void *buf) cur_part_info.start + block, nr_blocks, buf); } -int fat_register_device(block_dev_desc_t * dev_desc, int part_no) +int fat_set_blk_dev(block_dev_desc_t *dev_desc, disk_partition_t *info) { ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, dev_desc->blksz); - /* First close any currently found FAT filesystem */ - cur_dev = NULL; - -#if (defined(CONFIG_CMD_IDE) || \ - defined(CONFIG_CMD_SATA) || \ - defined(CONFIG_CMD_SCSI) || \ - defined(CONFIG_CMD_USB) || \ - defined(CONFIG_MMC) || \ - defined(CONFIG_SYSTEMACE) ) - - /* Read the partition table, if present */ - if (!get_partition_info(dev_desc, part_no, &cur_part_info)) { - cur_dev = dev_desc; - cur_part_nr = part_no; - } -#endif - - /* Otherwise it might be a superfloppy (whole-disk FAT filesystem) */ - if (!cur_dev) { - if (part_no != 0) { - printf("** Partition %d not valid on device %d **\n", - part_no, dev_desc->dev); - return -1; - } - - cur_dev = dev_desc; - cur_part_nr = 1; - cur_part_info.start = 0; - cur_part_info.size = dev_desc->lba; - cur_part_info.blksz = dev_desc->blksz; - memset(cur_part_info.name, 0, sizeof(cur_part_info.name)); - memset(cur_part_info.type, 0, sizeof(cur_part_info.type)); - } + cur_dev = dev_desc; + cur_part_info = *info; /* Make sure it has a valid FAT header */ if (disk_read(0, 1, buffer) != 1) { @@ -122,6 +90,34 @@ int fat_register_device(block_dev_desc_t * dev_desc, int part_no) return -1; } +int fat_register_device(block_dev_desc_t *dev_desc, int part_no) +{ + disk_partition_t info; + + /* First close any currently found FAT filesystem */ + cur_dev = NULL; + + /* Read the partition table, if present */ + if (get_partition_info(dev_desc, part_no, &info)) { + if (part_no != 0) { + printf("** Partition %d not valid on device %d **\n", + part_no, dev_desc->dev); + return -1; + } + + info.start = 0; + info.size = dev_desc->lba; + info.blksz = dev_desc->blksz; + info.name[0] = 0; + info.type[0] = 0; + info.bootable = 0; +#ifdef CONFIG_PARTITION_UUIDS + info.uuid[0] = 0; +#endif + } + + return fat_set_blk_dev(dev_desc, &info); +} /* * Get the first occurence of a directory delimiter ('/' or '\') in a string. @@ -567,15 +563,16 @@ get_vfatname(fsdata *mydata, int curclust, __u8 *cluster, } /* Calculate short name checksum */ -static __u8 mkcksum(const char *str) +static __u8 mkcksum(const char name[8], const char ext[3]) { int i; __u8 ret = 0; - for (i = 0; i < 11; i++) { - ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + str[i]; - } + for (i = 0; i < sizeof(name); i++) + ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + name[i]; + for (i = 0; i < sizeof(ext); i++) + ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + ext[i]; return ret; } @@ -678,7 +675,8 @@ static dir_entry *get_dentfromdir(fsdata *mydata, int startsect, return NULL; } #ifdef CONFIG_SUPPORT_VFAT - if (dols && mkcksum(dentptr->name) == prevcksum) { + __u8 csum = mkcksum(dentptr->name, dentptr->ext); + if (dols && csum == prevcksum) { prevcksum = 0xffff; dentptr++; continue; @@ -946,13 +944,16 @@ do_fat_read_at(const char *filename, unsigned long pos, void *buffer, for (i = 0; i < DIRENTSPERBLOCK; i++) { char s_name[14], l_name[VFAT_MAXLEN_BYTES]; + __u8 csum; l_name[0] = '\0'; if (dentptr->name[0] == DELETED_FLAG) { dentptr++; continue; } - if ((dentptr->attr & ATTR_VOLUME)) { + + csum = mkcksum(dentptr->name, dentptr->ext); + if (dentptr->attr & ATTR_VOLUME) { #ifdef CONFIG_SUPPORT_VFAT if ((dentptr->attr & ATTR_VFAT) == ATTR_VFAT && (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) { @@ -1015,8 +1016,7 @@ do_fat_read_at(const char *filename, unsigned long pos, void *buffer, goto exit; } #ifdef CONFIG_SUPPORT_VFAT - else if (dols == LS_ROOT && - mkcksum(dentptr->name) == prevcksum) { + else if (dols == LS_ROOT && csum == prevcksum) { prevcksum = 0xffff; dentptr++; continue; @@ -1235,8 +1235,7 @@ int file_fat_detectfs(void) vol_label[11] = '\0'; volinfo.fs_type[5] = '\0'; - printf("Partition %d: Filesystem: %s \"%s\"\n", cur_part_nr, - volinfo.fs_type, vol_label); + printf("Filesystem: %s \"%s\"\n", volinfo.fs_type, vol_label); return 0; } diff --git a/fs/fat/fat_write.c b/fs/fat/fat_write.c index 5829adf1a1..4a1bda0a37 100644 --- a/fs/fat/fat_write.c +++ b/fs/fat/fat_write.c @@ -335,7 +335,7 @@ fill_dir_slot(fsdata *mydata, dir_entry **dentptr, const char *l_name) /* Get short file name and checksum value */ strncpy(s_name, (*dentptr)->name, 16); - checksum = mkcksum(s_name); + checksum = mkcksum((*dentptr)->name, (*dentptr)->ext); do { memset(slotptr, 0x00, sizeof(dir_slot)); diff --git a/fs/fs.c b/fs/fs.c new file mode 100644 index 0000000000..ff360afd4b --- /dev/null +++ b/fs/fs.c @@ -0,0 +1,323 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <config.h> +#include <common.h> +#include <part.h> +#include <ext4fs.h> +#include <fat.h> +#include <fs.h> + +DECLARE_GLOBAL_DATA_PTR; + +static block_dev_desc_t *fs_dev_desc; +static disk_partition_t fs_partition; +static int fs_type = FS_TYPE_ANY; + +static inline int fs_ls_unsupported(const char *dirname) +{ + printf("** Unrecognized filesystem type **\n"); + return -1; +} + +static inline int fs_read_unsupported(const char *filename, ulong addr, + int offset, int len) +{ + printf("** Unrecognized filesystem type **\n"); + return -1; +} + +#ifdef CONFIG_FS_FAT +static int fs_probe_fat(void) +{ + return fat_set_blk_dev(fs_dev_desc, &fs_partition); +} + +static void fs_close_fat(void) +{ +} + +#define fs_ls_fat file_fat_ls + +static int fs_read_fat(const char *filename, ulong addr, int offset, int len) +{ + int len_read; + + len_read = file_fat_read_at(filename, offset, + (unsigned char *)addr, len); + if (len_read == -1) { + printf("** Unable to read file %s **\n", filename); + return -1; + } + + return len_read; +} +#else +static inline int fs_probe_fat(void) +{ + return -1; +} + +static inline void fs_close_fat(void) +{ +} + +#define fs_ls_fat fs_ls_unsupported +#define fs_read_fat fs_read_unsupported +#endif + +#ifdef CONFIG_FS_EXT4 +static int fs_probe_ext(void) +{ + ext4fs_set_blk_dev(fs_dev_desc, &fs_partition); + + if (!ext4fs_mount(fs_partition.size)) { + ext4fs_close(); + return -1; + } + + return 0; +} + +static void fs_close_ext(void) +{ + ext4fs_close(); +} + +#define fs_ls_ext ext4fs_ls + +static int fs_read_ext(const char *filename, ulong addr, int offset, int len) +{ + int file_len; + int len_read; + + if (offset != 0) { + printf("** Cannot support non-zero offset **\n"); + return -1; + } + + file_len = ext4fs_open(filename); + if (file_len < 0) { + printf("** File not found %s **\n", filename); + ext4fs_close(); + return -1; + } + + if (len == 0) + len = file_len; + + len_read = ext4fs_read((char *)addr, len); + ext4fs_close(); + + if (len_read != len) { + printf("** Unable to read file %s **\n", filename); + return -1; + } + + return len_read; +} +#else +static inline int fs_probe_ext(void) +{ + return -1; +} + +static inline void fs_close_ext(void) +{ +} + +#define fs_ls_ext fs_ls_unsupported +#define fs_read_ext fs_read_unsupported +#endif + +static struct { + int fstype; + int (*probe)(void); +} fstypes[] = { + { + .fstype = FS_TYPE_FAT, + .probe = fs_probe_fat, + }, + { + .fstype = FS_TYPE_EXT, + .probe = fs_probe_ext, + }, +}; + +int fs_set_blk_dev(const char *ifname, const char *dev_part_str, int fstype) +{ + int part, i; +#ifdef CONFIG_NEEDS_MANUAL_RELOC + static int relocated; + + if (!relocated) { + for (i = 0; i < ARRAY_SIZE(fstypes); i++) + fstypes[i].probe += gd->reloc_off; + relocated = 1; + } +#endif + + part = get_device_and_partition(ifname, dev_part_str, &fs_dev_desc, + &fs_partition, 1); + if (part < 0) + return -1; + + for (i = 0; i < ARRAY_SIZE(fstypes); i++) { + if ((fstype != FS_TYPE_ANY) && (fstype != fstypes[i].fstype)) + continue; + + if (!fstypes[i].probe()) { + fs_type = fstypes[i].fstype; + return 0; + } + } + + printf("** Unrecognized filesystem type **\n"); + return -1; +} + +static void fs_close(void) +{ + switch (fs_type) { + case FS_TYPE_FAT: + fs_close_fat(); + break; + case FS_TYPE_EXT: + fs_close_ext(); + break; + default: + break; + } + + fs_type = FS_TYPE_ANY; +} + +int fs_ls(const char *dirname) +{ + int ret; + + switch (fs_type) { + case FS_TYPE_FAT: + ret = fs_ls_fat(dirname); + break; + case FS_TYPE_EXT: + ret = fs_ls_ext(dirname); + break; + default: + ret = fs_ls_unsupported(dirname); + break; + } + + fs_close(); + + return ret; +} + +int fs_read(const char *filename, ulong addr, int offset, int len) +{ + int ret; + + switch (fs_type) { + case FS_TYPE_FAT: + ret = fs_read_fat(filename, addr, offset, len); + break; + case FS_TYPE_EXT: + ret = fs_read_ext(filename, addr, offset, len); + break; + default: + ret = fs_read_unsupported(filename, addr, offset, len); + break; + } + + fs_close(); + + return ret; +} + +int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], + int fstype, int cmdline_base) +{ + unsigned long addr; + const char *addr_str; + const char *filename; + unsigned long bytes; + unsigned long pos; + int len_read; + char buf[12]; + + if (argc < 2) + return CMD_RET_USAGE; + if (argc > 7) + return CMD_RET_USAGE; + + if (fs_set_blk_dev(argv[1], (argc >= 3) ? argv[2] : NULL, fstype)) + return 1; + + if (argc >= 4) { + addr = simple_strtoul(argv[3], NULL, cmdline_base); + } else { + addr_str = getenv("loadaddr"); + if (addr_str != NULL) + addr = simple_strtoul(addr_str, NULL, 16); + else + addr = CONFIG_SYS_LOAD_ADDR; + } + if (argc >= 5) { + filename = argv[4]; + } else { + filename = getenv("bootfile"); + if (!filename) { + puts("** No boot file defined **\n"); + return 1; + } + } + if (argc >= 6) + bytes = simple_strtoul(argv[5], NULL, cmdline_base); + else + bytes = 0; + if (argc >= 7) + pos = simple_strtoul(argv[6], NULL, cmdline_base); + else + pos = 0; + + len_read = fs_read(filename, addr, pos, bytes); + if (len_read <= 0) + return 1; + + printf("%d bytes read\n", len_read); + + sprintf(buf, "0x%x", len_read); + setenv("filesize", buf); + + return 0; +} + +int do_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], + int fstype) +{ + if (argc < 2) + return CMD_RET_USAGE; + if (argc > 4) + return CMD_RET_USAGE; + + if (fs_set_blk_dev(argv[1], (argc >= 3) ? argv[2] : NULL, fstype)) + return 1; + + if (fs_ls(argc >= 4 ? argv[3] : "/")) + return 1; + + return 0; +} diff --git a/fs/yaffs2/ydirectenv.h b/fs/yaffs2/ydirectenv.h index c912b09a40..c2ffbfd56d 100644 --- a/fs/yaffs2/ydirectenv.h +++ b/fs/yaffs2/ydirectenv.h @@ -56,8 +56,6 @@ void yaffs_qsort(void *aa, size_t n, size_t es, #ifdef NO_inline #define inline -#else -#define inline __inline__ #endif #define cond_resched() do {} while (0) diff --git a/fs/zfs/zfs.c b/fs/zfs/zfs.c index 360f723c84..2db45b1928 100644 --- a/fs/zfs/zfs.c +++ b/fs/zfs/zfs.c @@ -2002,49 +2002,6 @@ zfs_fetch_nvlist(device_t dev, char **nvlist) return err; } -static int -zfs_label(device_t device, char **label) -{ - char *nvlist; - int err; - struct zfs_data *data; - - data = zfs_mount(device); - if (!data) - return ZFS_ERR_BAD_FS; - - err = int_zfs_fetch_nvlist(data, &nvlist); - if (err) { - zfs_unmount(data); - return err; - } - - *label = zfs_nvlist_lookup_string(nvlist, ZPOOL_CONFIG_POOL_NAME); - free(nvlist); - zfs_unmount(data); - return ZFS_ERR_NONE; -} - -static int -zfs_uuid(device_t device, char **uuid) -{ - struct zfs_data *data; - - data = zfs_mount(device); - if (!data) - return ZFS_ERR_BAD_FS; - - *uuid = malloc(17); /* %016llx + nil */ - if (!*uuid) - return ZFS_ERR_OUT_OF_MEMORY; - - /* *uuid = xasprintf ("%016llx", (long long unsigned) data->pool_guid);*/ - snprintf(*uuid, 17, "%016llx", (long long unsigned) data->pool_guid); - zfs_unmount(data); - - return ZFS_ERR_NONE; -} - /* * zfs_open() locates a file in the rootpool by following the * MOS and places the dnode of the file in the memory address DNODE. @@ -2325,14 +2282,6 @@ zfs_ls(device_t device, const char *path, struct zfs_data *data; int err; int isfs; -#if 0 - char *label = NULL; - - zfs_label(device, &label); - if (label) - printf("ZPOOL label '%s'\n", - label); -#endif data = zfs_mount(device); if (!data) diff --git a/helper.mk b/helper.mk new file mode 100644 index 0000000000..79a1da01e3 --- /dev/null +++ b/helper.mk @@ -0,0 +1,64 @@ +# +# Copyright (C) 2012 Marek Vasut <marex@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +######################################################################### + +## +# make_u_boot_list - Generate contents of u_boot_list section +# 1: The name of the resulting file (usually u-boot.lst) +# 2: Files to analyze for possible u_boot_list entries +# +# This function generates the contents of the u_boot_list section, +# including all the border symbols for it's subsections. The operation +# of this function is as follows, numbering goes per lines: +# +# 1) Dump the ELF header sections from all files supplied via $(2) +# 2) Filter out all other stuff that does not belong into .u_boot_list +# section. +# 3) Fix up the lines so that the resulting output is is in format +# ".u_boot_list.*". +# 4) Remove the last .something$, since that only contains the name +# of the variable to be put into a subsection. This name is irelevant +# for generation of border symbols, thus of no interest, remove it. +# 5) Take each line and for every dot "." in that line, print the whole +# line until that dot "." . This is important so that we have all +# parent border symbols generated as well. +# 6) Load every line and firstly append "\a" at the end and print the +# line. Next, append "@" at the end and print the line. Finally, +# append "~" at the end of line. This will make sense in conjunction +# with 6) and 7). +# 7) Sort the lines. It is imperative to use LC_COLLATE=C here because +# with this, the "\a" symbol is first and "~" symbol is last. Any +# other symbols fall inbetween. Symbols like "@", which marks the +# end of current line (representing current section) and ".", which +# means the line continues and thus represents subsection. +# 8) With such ordering, all lines ending with "\a" will float at the +# begining of all lines with the same prefix. Thus it is easy to +# replace "\a" with __start and make it the __start border symbol. +# Very similarly for "~", which will be always at the bottom and so +# can be replaced by "__end" and made into the __end border symbol. +# Finally, every line ending with "@" symbol will be transformed +# into " *(SORT(${line}*)); " format, which in the linker parlance +# will allow it to trap all symbols relevant to the subsection. +# +define make_u_boot_list +$(1): $(2) + $(OBJDUMP) -h $(2) | \ + sed -n -e '/.*\.u_boot_list[^ ]\+/ ! {d;n}' \ + -e 's/.*\(\.u_boot_list[^ ]\+\).*$$$$/\1/' \ + -e 's/\.[^\.]\+$$$$//' \ + -e ':s /^.\+$$$$/ { p;s/^\(.*\)\.[^\.]*$$$$/\1/;b s }' | \ + sed -n -e 'h;s/$$$$/\a/p;g;s/$$$$/@/p;g;s/$$$$/~/p;' | \ + LC_COLLATE=C sort -u | \ + sed -n -e '/\a$$$$/ { s/\./_/g;s/\a$$$$/__start = .;/p; }'\ + -e '/~$$$$/ { s/\./_/g;s/~$$$$/__end = .;/p; }'\ + -e '/@$$$$/ { s/\(.*\)@$$$$/*(SORT(\1.*));/p }' > $(1) +endef diff --git a/include/ahci.h b/include/ahci.h index c4fb9e79a5..babbdc656f 100644 --- a/include/ahci.h +++ b/include/ahci.h @@ -51,6 +51,7 @@ #define HOST_IRQ_STAT 0x08 /* interrupt status */ #define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */ #define HOST_VERSION 0x10 /* AHCI spec. version compliancy */ +#define HOST_CAP2 0x24 /* host capabilities, extended */ /* HOST_CTL bits */ #define HOST_RESET (1 << 0) /* reset controller; self-clear */ diff --git a/include/ata.h b/include/ata.h index 3b2d737e61..a614724b8e 100644 --- a/include/ata.h +++ b/include/ata.h @@ -114,6 +114,9 @@ #define ATA_CMD_WRITE_EXT 0x34 /* Write Sectores (with retries) with 48bit addressing */ #define ATA_CMD_VRFY_EXT 0x42 /* Read Verify (with retries) with 48bit addressing */ +#define ATA_CMD_FLUSH 0xE7 /* Flush drive cache */ +#define ATA_CMD_FLUSH_EXT 0xEA /* Flush drive cache, with 48bit addressing */ + /* * ATAPI Commands */ diff --git a/include/atmel_mci.h b/include/atmel_mci.h index 3dd5d67be9..c711881276 100644 --- a/include/atmel_mci.h +++ b/include/atmel_mci.h @@ -38,7 +38,7 @@ typedef struct atmel_mci { u32 sdcr; /* 0x0c */ u32 argr; /* 0x10 */ u32 cmdr; /* 0x14 */ - u32 _18; /* 0x18 */ + u32 blkr; /* 0x18 */ u32 _1c; /* 0x1c */ u32 rspr; /* 0x20 */ u32 rspr1; /* 0x24 */ @@ -118,6 +118,11 @@ typedef struct atmel_mci { #define MMCI_TRTYP_OFFSET 19 #define MMCI_TRTYP_SIZE 2 +/* Bitfields in BLKR */ +/* MMCI_BLKLEN_OFFSET/SIZE already defined in MR */ +#define MMCI_BCNT_OFFSET 0 +#define MMCI_BCNT_SIZE 16 + /* Bitfields in RSPRx */ #define MMCI_RSP_OFFSET 0 #define MMCI_RSP_SIZE 32 diff --git a/include/bouncebuf.h b/include/bouncebuf.h new file mode 100644 index 0000000000..31021c5b85 --- /dev/null +++ b/include/bouncebuf.h @@ -0,0 +1,87 @@ +/* + * Generic bounce buffer implementation + * + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __INCLUDE_BOUNCEBUF_H__ +#define __INCLUDE_BOUNCEBUF_H__ + +/* + * GEN_BB_READ -- Data are read from the buffer eg. by DMA hardware. + * The source buffer is copied into the bounce buffer (if unaligned, otherwise + * the source buffer is used directly) upon start() call, then the operation + * requiring the aligned transfer happens, then the bounce buffer is lost upon + * stop() call. + */ +#define GEN_BB_READ (1 << 0) +/* + * GEN_BB_WRITE -- Data are written into the buffer eg. by DMA hardware. + * The source buffer starts in an undefined state upon start() call, then the + * operation requiring the aligned transfer happens, then the bounce buffer is + * copied into the destination buffer (if unaligned, otherwise destination + * buffer is used directly) upon stop() call. + */ +#define GEN_BB_WRITE (1 << 1) +/* + * GEN_BB_RW -- Data are read and written into the buffer eg. by DMA hardware. + * The source buffer is copied into the bounce buffer (if unaligned, otherwise + * the source buffer is used directly) upon start() call, then the operation + * requiring the aligned transfer happens, then the bounce buffer is copied + * into the destination buffer (if unaligned, otherwise destination buffer is + * used directly) upon stop() call. + */ +#define GEN_BB_RW (GEN_BB_READ | GEN_BB_WRITE) + +#ifdef CONFIG_BOUNCE_BUFFER +/** + * bounce_buffer_start() -- Start the bounce buffer session + * data: pointer to buffer to be aligned + * len: length of the buffer + * backup: pointer to backup buffer (the original value is stored here if + * needed + * flags: flags describing the transaction, see above. + */ +int bounce_buffer_start(void **data, size_t len, void **backup, uint8_t flags); +/** + * bounce_buffer_stop() -- Finish the bounce buffer session + * data: pointer to buffer that was aligned + * len: length of the buffer + * backup: pointer to backup buffer (the original value is stored here if + * needed + * flags: flags describing the transaction, see above. + */ +int bounce_buffer_stop(void **data, size_t len, void **backup, uint8_t flags); +#else +static inline int bounce_buffer_start(void **data, size_t len, void **backup, + uint8_t flags) +{ + return 0; +} + +static inline int bounce_buffer_stop(void **data, size_t len, void **backup, + uint8_t flags) +{ + return 0; +} +#endif + +#endif diff --git a/include/cbfs.h b/include/cbfs.h new file mode 100644 index 0000000000..6ea3f35119 --- /dev/null +++ b/include/cbfs.h @@ -0,0 +1,181 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. All rights reserved. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CBFS_H +#define __CBFS_H + +#include <compiler.h> +#include <linux/compiler.h> + +enum cbfs_result { + CBFS_SUCCESS = 0, + CBFS_NOT_INITIALIZED, + CBFS_BAD_HEADER, + CBFS_BAD_FILE, + CBFS_FILE_NOT_FOUND +}; + +enum cbfs_filetype { + CBFS_TYPE_STAGE = 0x10, + CBFS_TYPE_PAYLOAD = 0x20, + CBFS_TYPE_OPTIONROM = 0x30, + CBFS_TYPE_BOOTSPLASH = 0x40, + CBFS_TYPE_RAW = 0x50, + CBFS_TYPE_VSA = 0x51, + CBFS_TYPE_MBI = 0x52, + CBFS_TYPE_MICROCODE = 0x53, + CBFS_COMPONENT_CMOS_DEFAULT = 0xaa, + CBFS_COMPONENT_CMOS_LAYOUT = 0x01aa +}; + +struct cbfs_header { + u32 magic; + u32 version; + u32 rom_size; + u32 boot_block_size; + u32 align; + u32 offset; + u32 pad[2]; +} __packed; + +struct cbfs_fileheader { + u8 magic[8]; + u32 len; + u32 type; + u32 checksum; + u32 offset; +} __packed; + +struct cbfs_cachenode { + struct cbfs_cachenode *next; + u32 type; + void *data; + u32 data_length; + char *name; + u32 name_length; + u32 checksum; +} __packed; + +extern enum cbfs_result file_cbfs_result; + +/* + * Return a string describing the most recent error condition. + * + * @return A pointer to the constant string. + */ +const char *file_cbfs_error(void); + +/* + * Initialize the CBFS driver and load metadata into RAM. + * + * @param end_of_rom Points to the end of the ROM the CBFS should be read + * from. + */ +void file_cbfs_init(uintptr_t end_of_rom); + +/* + * Get the header structure for the current CBFS. + * + * @return A pointer to the constant structure, or NULL if there is none. + */ +const struct cbfs_header *file_cbfs_get_header(void); + +/* + * Get a handle for the first file in CBFS. + * + * @return A handle for the first file in CBFS, NULL on error. + */ +const struct cbfs_cachenode *file_cbfs_get_first(void); + +/* + * Get a handle to the file after this one in CBFS. + * + * @param file A pointer to the handle to advance. + */ +void file_cbfs_get_next(const struct cbfs_cachenode **file); + +/* + * Find a file with a particular name in CBFS. + * + * @param name The name to search for. + * + * @return A handle to the file, or NULL on error. + */ +const struct cbfs_cachenode *file_cbfs_find(const char *name); + + +/***************************************************************************/ +/* All of the functions below can be used without first initializing CBFS. */ +/***************************************************************************/ + +/* + * Find a file with a particular name in CBFS without using the heap. + * + * @param end_of_rom Points to the end of the ROM the CBFS should be read + * from. + * @param name The name to search for. + * + * @return A handle to the file, or NULL on error. + */ +const struct cbfs_cachenode *file_cbfs_find_uncached(uintptr_t end_of_rom, + const char *name); + +/* + * Get the name of a file in CBFS. + * + * @param file The handle to the file. + * + * @return The name of the file, NULL on error. + */ +const char *file_cbfs_name(const struct cbfs_cachenode *file); + +/* + * Get the size of a file in CBFS. + * + * @param file The handle to the file. + * + * @return The size of the file, zero on error. + */ +u32 file_cbfs_size(const struct cbfs_cachenode *file); + +/* + * Get the type of a file in CBFS. + * + * @param file The handle to the file. + * + * @return The type of the file, zero on error. + */ +u32 file_cbfs_type(const struct cbfs_cachenode *file); + +/* + * Read a file from CBFS into RAM + * + * @param file A handle to the file to read. + * @param buffer Where to read it into memory. + * + * @return If positive or zero, the number of characters read. If negative, an + * error occurred. + */ +long file_cbfs_read(const struct cbfs_cachenode *file, void *buffer, + unsigned long maxsize); + +#endif /* __CBFS_H */ diff --git a/include/clps7111.h b/include/clps7111.h deleted file mode 100644 index baf600773b..0000000000 --- a/include/clps7111.h +++ /dev/null @@ -1,276 +0,0 @@ -/* - * linux/include/asm-arm/hardware/clps7111.h - * - * This file contains the hardware definitions of the CLPS7111 internal - * registers. - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_HARDWARE_CLPS7111_H -#define __ASM_HARDWARE_CLPS7111_H - -#define CLPS7111_PHYS_BASE (0x80000000) - -#ifndef __ASSEMBLY__ -#define clps_readb(off) __raw_readb(CLPS7111_BASE + (off)) -#define clps_readl(off) __raw_readl(CLPS7111_BASE + (off)) -#define clps_writeb(val,off) __raw_writeb(val, CLPS7111_BASE + (off)) -#define clps_writel(val,off) __raw_writel(val, CLPS7111_BASE + (off)) -#endif - -#define PADR (0x0000) -#define PBDR (0x0001) -#define PDDR (0x0003) -#define PADDR (0x0040) -#define PBDDR (0x0041) -#define PDDDR (0x0043) -#define PEDR (0x0080) -#define PEDDR (0x00c0) -#define SYSCON1 (0x0100) -#define SYSFLG1 (0x0140) -#define MEMCFG1 (0x0180) -#define MEMCFG2 (0x01c0) -#define DRFPR (0x0200) -#define INTSR1 (0x0240) -#define INTMR1 (0x0280) -#define LCDCON (0x02c0) -#define TC1D (0x0300) -#define TC2D (0x0340) -#define RTCDR (0x0380) -#define RTCMR (0x03c0) -#define PMPCON (0x0400) -#define CODR (0x0440) -#define UARTDR1 (0x0480) -#define UBRLCR1 (0x04c0) -#define SYNCIO (0x0500) -#define PALLSW (0x0540) -#define PALMSW (0x0580) -#define STFCLR (0x05c0) -#define BLEOI (0x0600) -#define MCEOI (0x0640) -#define TEOI (0x0680) -#define TC1EOI (0x06c0) -#define TC2EOI (0x0700) -#define RTCEOI (0x0740) -#define UMSEOI (0x0780) -#define COEOI (0x07c0) -#define HALT (0x0800) -#define STDBY (0x0840) - -#define FBADDR (0x1000) -#define SYSCON2 (0x1100) -#define SYSFLG2 (0x1140) -#define INTSR2 (0x1240) -#define INTMR2 (0x1280) -#define UARTDR2 (0x1480) -#define UBRLCR2 (0x14c0) -#define SS2DR (0x1500) -#define SRXEOF (0x1600) -#define SS2POP (0x16c0) -#define KBDEOI (0x1700) - -/* common bits: SYSCON1 / SYSCON2 */ -#define SYSCON_UARTEN (1 << 8) - -#define SYSCON1_KBDSCAN(x) ((x) & 15) -#define SYSCON1_KBDSCANMASK (15) -#define SYSCON1_TC1M (1 << 4) -#define SYSCON1_TC1S (1 << 5) -#define SYSCON1_TC2M (1 << 6) -#define SYSCON1_TC2S (1 << 7) -#define SYSCON1_UART1EN SYSCON_UARTEN -#define SYSCON1_BZTOG (1 << 9) -#define SYSCON1_BZMOD (1 << 10) -#define SYSCON1_DBGEN (1 << 11) -#define SYSCON1_LCDEN (1 << 12) -#define SYSCON1_CDENTX (1 << 13) -#define SYSCON1_CDENRX (1 << 14) -#define SYSCON1_SIREN (1 << 15) -#define SYSCON1_ADCKSEL(x) (((x) & 3) << 16) -#define SYSCON1_ADCKSEL_MASK (3 << 16) -#define SYSCON1_EXCKEN (1 << 18) -#define SYSCON1_WAKEDIS (1 << 19) -#define SYSCON1_IRTXM (1 << 20) - -/* common bits: SYSFLG1 / SYSFLG2 */ -#define SYSFLG_UBUSY (1 << 11) -#define SYSFLG_URXFE (1 << 22) -#define SYSFLG_UTXFF (1 << 23) - -#define SYSFLG1_MCDR (1 << 0) -#define SYSFLG1_DCDET (1 << 1) -#define SYSFLG1_WUDR (1 << 2) -#define SYSFLG1_WUON (1 << 3) -#define SYSFLG1_CTS (1 << 8) -#define SYSFLG1_DSR (1 << 9) -#define SYSFLG1_DCD (1 << 10) -#define SYSFLG1_UBUSY SYSFLG_UBUSY -#define SYSFLG1_NBFLG (1 << 12) -#define SYSFLG1_RSTFLG (1 << 13) -#define SYSFLG1_PFFLG (1 << 14) -#define SYSFLG1_CLDFLG (1 << 15) -#define SYSFLG1_URXFE SYSFLG_URXFE -#define SYSFLG1_UTXFF SYSFLG_UTXFF -#define SYSFLG1_CRXFE (1 << 24) -#define SYSFLG1_CTXFF (1 << 25) -#define SYSFLG1_SSIBUSY (1 << 26) -#define SYSFLG1_ID (1 << 29) - -#define SYSFLG2_SSRXOF (1 << 0) -#define SYSFLG2_RESVAL (1 << 1) -#define SYSFLG2_RESFRM (1 << 2) -#define SYSFLG2_SS2RXFE (1 << 3) -#define SYSFLG2_SS2TXFF (1 << 4) -#define SYSFLG2_SS2TXUF (1 << 5) -#define SYSFLG2_CKMODE (1 << 6) -#define SYSFLG2_UBUSY SYSFLG_UBUSY -#define SYSFLG2_URXFE SYSFLG_URXFE -#define SYSFLG2_UTXFF SYSFLG_UTXFF - -#define LCDCON_GSEN (1 << 30) -#define LCDCON_GSMD (1 << 31) - -#define SYSCON2_SERSEL (1 << 0) -#define SYSCON2_KBD6 (1 << 1) -#define SYSCON2_DRAMZ (1 << 2) -#define SYSCON2_KBWEN (1 << 3) -#define SYSCON2_SS2TXEN (1 << 4) -#define SYSCON2_PCCARD1 (1 << 5) -#define SYSCON2_PCCARD2 (1 << 6) -#define SYSCON2_SS2RXEN (1 << 7) -#define SYSCON2_UART2EN SYSCON_UARTEN -#define SYSCON2_SS2MAEN (1 << 9) -#define SYSCON2_OSTB (1 << 12) -#define SYSCON2_CLKENSL (1 << 13) -#define SYSCON2_BUZFREQ (1 << 14) - -/* common bits: UARTDR1 / UARTDR2 */ -#define UARTDR_FRMERR (1 << 8) -#define UARTDR_PARERR (1 << 9) -#define UARTDR_OVERR (1 << 10) - -/* common bits: UBRLCR1 / UBRLCR2 */ -#define UBRLCR_BAUD_MASK ((1 << 12) - 1) -#define UBRLCR_BREAK (1 << 12) -#define UBRLCR_PRTEN (1 << 13) -#define UBRLCR_EVENPRT (1 << 14) -#define UBRLCR_XSTOP (1 << 15) -#define UBRLCR_FIFOEN (1 << 16) -#define UBRLCR_WRDLEN5 (0 << 17) -#define UBRLCR_WRDLEN6 (1 << 17) -#define UBRLCR_WRDLEN7 (2 << 17) -#define UBRLCR_WRDLEN8 (3 << 17) -#define UBRLCR_WRDLEN_MASK (3 << 17) - -#define SYNCIO_SMCKEN (1 << 13) -#define SYNCIO_TXFRMEN (1 << 14) - -#define SYSCON3 0x2200 /* System Control register 3 ----------------------- */ -#define ADCCON 0x00000001 /* ADC configuration */ -#define CLKCTL 0x00000006 /* processor clock control */ -#define CLKCTL_18 0x0 /* 18.432 MHz */ -#define CLKCTL_36 0x2 /* 36.864 MHz */ -#define CLKCTL_49 0x4 /* 49.152 MHz */ -#define CLKCTL_73 0x6 /* 73.728 MHz */ -#define MCPSEL 0x00000008 /* MCP select */ -#define ADCCKNSEN 0x000010 /* ADC clock sense */ -#define VERSN 0x000000e0 /* additional version bits */ -#define VERSN_SHIFT 5 -#define FASTWAKE 0x0000100 /* Wakeup clock select: 0=8Hz, 1=4kHz */ - -#define INTSR3 0x2240 /* Interrupt Status register 3 --------------------- */ -#define MCPINT 0x00000001 /* MCP interface interrupt (FIQ) */ - -#define INTMR3 0x2280 /* Interrupt Mask register 3 ----------------------- */ -#define LEDFLSH 0x22C0 /* LED Flash control register ---------------------- */ -#define LEDFLSH_RATE 0x03 /* flash rate */ -#define LEDFLSH_RATE_SHIFT 0 -#define LEDFLSH_DUTY 0x3c /* duty ratio */ -#define LEDFLSH_DUTY_SHIFT 2 -#define LEDFLSH_ENABLE 0x40 /* enable */ - -#define IO_START CLPS7111_PHYS_BASE - -#define IO(offset) (IO_START + (offset)) - -#define IO_BYTE(offset) (*(volatile unsigned char *)(IO_START + (offset))) -#define IO_WORD(offset) (*(volatile unsigned long *)(IO_START + (offset))) - -#define IO_PADR IO_BYTE(PADR) -#define IO_PBDR IO_BYTE(PBDR) -#define IO_PDDR IO_BYTE(PDDR) -#define IO_PADDR IO_BYTE(PADDR) -#define IO_PBDDR IO_BYTE(PBDDR) -#define IO_PDDDR IO_BYTE(PDDDR) -#define IO_PEDR IO_BYTE(PEDR) -#define IO_PEDDR IO_BYTE(PEDDR) -#define IO_SYSCON IO_WORD(SYSCON) -#define IO_SYSFLG IO_WORD(SYSFLG) -#define IO_MEMCFG1 IO_WORD(MEMCFG1) -#define IO_MEMCFG2 IO_WORD(MEMCFG2) -#define IO_DRFPR IO_WORD(DRFPR) -#define IO_INTSR IO_WORD(INTSR) -#define IO_INTMR IO_WORD(INTMR) -#define IO_LCDCON IO_WORD(LCDCON) -#define IO_TC1D IO_WORD(TC1D) -#define IO_TC2D IO_WORD(TC2D) -#define IO_RTCDR IO_WORD(RTCDR) -#define IO_RTCMR IO_WORD(RTCMR) -#define IO_PMPCON IO_WORD(PMPCON) -#define IO_CODR IO_BYTE(CODR) -#define IO_UARTDR IO_WORD(UARTDR) -#define IO_UBRLCR IO_WORD(UBRLCR) -#define IO_SYNCIO IO_WORD(SYNCIO) -#define IO_PALLSW IO_WORD(PALLSW) -#define IO_PALMSW IO_WORD(PALMSW) -#define IO_STFCLR IO_WORD(STFCLR) -#define IO_BLEOI IO_WORD(BLEOI) -#define IO_MCEOI IO_WORD(MCEOI) -#define IO_TEOI IO_WORD(TEOI) -#define IO_TC1EOI IO_WORD(TC1EOI) -#define IO_TC2EOI IO_WORD(TC2EOI) -#define IO_RTCEOI IO_WORD(RTCEOI) -#define IO_UMSEOI IO_WORD(UMSEOI) -#define IO_COEOI IO_WORD(COEOI) -#define IO_HALT IO_WORD(HALT) -#define IO_STDBY IO_WORD(STDBY) -#define IO_SYSCON1 IO_WORD(SYSCON1) -#define IO_SYSFLG1 IO_WORD(SYSFLG1) -#define IO_INTSR1 IO_WORD(INTSR1) -#define IO_INTMR1 IO_WORD(INTMR1) -#define IO_UARTDR1 IO_WORD(UARTDR1) -#define IO_UBRLCR1 IO_WORD(UBRLCR1) -#define IO_FRBADDR IO_WORD(FRBADDR) -#define IO_SYSCON2 IO_WORD(SYSCON2) -#define IO_SYSFLG2 IO_WORD(SYSFLG2) -#define IO_INTSR2 IO_WORD(INTSR2) -#define IO_INTMR2 IO_WORD(INTMR2) -#define IO_UARTDR2 IO_WORD(UARTDR2) -#define IO_UBRLCR2 IO_WORD(UBRLCR2) -#define IO_KBDEOI IO_WORD(KBDEOI) - -#define IO_MCCR IO_WORD(MCCR) -#define IO_MCDR0 IO_WORD(MCDR0) -#define IO_MCDR1 IO_WORD(MCDR1) -#define IO_MCDR2 IO_WORD(MCDR2) -#define IO_MCSR IO_WORD(MCSR) -#define IO_SYSCON3 IO_WORD(SYSCON3) -#define IO_INTSR3 IO_WORD(INTSR3) -#define IO_INTMR3 IO_WORD(INTMR3) -#define IO_LEDFLSH IO_WORD(LEDFLSH) - -#endif /* __ASM_HARDWARE_CLPS7111_H */ diff --git a/include/command.h b/include/command.h index 1f06aa1819..10bc2606c7 100644 --- a/include/command.h +++ b/include/command.h @@ -28,6 +28,7 @@ #define __COMMAND_H #include <config.h> +#include <linker_lists.h> #ifndef NULL #define NULL 0 @@ -61,8 +62,6 @@ struct cmd_tbl_s { typedef struct cmd_tbl_s cmd_tbl_t; -extern cmd_tbl_t __u_boot_cmd_start; -extern cmd_tbl_t __u_boot_cmd_end; #if defined(CONFIG_CMD_RUN) extern int do_run(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); @@ -153,9 +152,6 @@ int cmd_process(int flag, int argc, char * const argv[], #define CMD_FLAG_REPEAT 0x0001 /* repeat last command */ #define CMD_FLAG_BOOTD 0x0002 /* command is from bootd */ -#define Struct_Section __attribute__((unused, section(".u_boot_cmd"), \ - aligned(4))) - #ifdef CONFIG_AUTO_COMPLETE # define _CMD_COMPLETE(x) x, #else @@ -167,18 +163,22 @@ int cmd_process(int flag, int argc, char * const argv[], # define _CMD_HELP(x) #endif -#define U_BOOT_CMD_MKENT_COMPLETE(name,maxargs,rep,cmd,usage,help,comp) \ - {#name, maxargs, rep, cmd, usage, _CMD_HELP(help) _CMD_COMPLETE(comp)} +#define U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ + _usage, _help, _comp) \ + { #_name, _maxargs, _rep, _cmd, _usage, \ + _CMD_HELP(_help) _CMD_COMPLETE(_comp) } -#define U_BOOT_CMD_MKENT(name,maxargs,rep,cmd,usage,help) \ - U_BOOT_CMD_MKENT_COMPLETE(name,maxargs,rep,cmd,usage,help,NULL) +#define U_BOOT_CMD_MKENT(_name, _maxargs, _rep, _cmd, _usage, _help) \ + U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ + _usage, _help, NULL) -#define U_BOOT_CMD_COMPLETE(name,maxargs,rep,cmd,usage,help,comp) \ - cmd_tbl_t __u_boot_cmd_##name Struct_Section = \ - U_BOOT_CMD_MKENT_COMPLETE(name,maxargs,rep,cmd,usage,help,comp) +#define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \ + ll_entry_declare(cmd_tbl_t, _name, cmd, cmd) = \ + U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ + _usage, _help, _comp); -#define U_BOOT_CMD(name,maxargs,rep,cmd,usage,help) \ - U_BOOT_CMD_COMPLETE(name,maxargs,rep,cmd,usage,help,NULL) +#define U_BOOT_CMD(_name, _maxargs, _rep, _cmd, _usage, _help) \ + U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL) #if defined(CONFIG_NEEDS_MANUAL_RELOC) void fixup_cmdtable(cmd_tbl_t *cmdtp, int size); diff --git a/include/common.h b/include/common.h index b23e90b025..5e3c5eeee1 100644 --- a/include/common.h +++ b/include/common.h @@ -341,13 +341,9 @@ char *getenv (const char *); int getenv_f (const char *name, char *buf, unsigned len); ulong getenv_ulong(const char *name, int base, ulong default_val); int saveenv (void); -#ifdef CONFIG_PPC /* ARM version to be fixed! */ -int inline setenv (const char *, const char *); -#else int setenv (const char *, const char *); int setenv_ulong(const char *varname, ulong value); int setenv_addr(const char *varname, const void *addr); -#endif /* CONFIG_PPC */ #ifdef CONFIG_ARM # include <asm/mach-types.h> # include <asm/setup.h> diff --git a/include/commproc.h b/include/commproc.h index 8b8cc45dad..7ca28c8369 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -466,39 +466,6 @@ typedef struct scc_enet { #endif /* MPC860ADS */ -/*** AMX860 **********************************************/ - -#if defined(CONFIG_AMX860) - -/* This ENET stuff is for the AMX860 with ethernet on SCC1. - */ - -#define PROFF_ENET PROFF_SCC1 -#define CPM_CR_ENET CPM_CR_CH_SCC1 -#define SCC_ENET 0 - -#define PA_ENET_RXD ((ushort)0x0001) -#define PA_ENET_TXD ((ushort)0x0002) -#define PA_ENET_TCLK ((ushort)0x0400) -#define PA_ENET_RCLK ((ushort)0x0800) - -#define PB_ENET_TENA ((uint)0x00001000) - -#define PC_ENET_CLSN ((ushort)0x0010) -#define PC_ENET_RENA ((ushort)0x0020) - -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000003e) - -/* 68160 PHY control */ - -#define PB_ENET_ETHLOOP ((uint)0x00020000) -#define PB_ENET_TPFLDL ((uint)0x00010000) -#define PB_ENET_TPSQEL ((uint)0x00008000) -#define PD_ENET_ETH_EN ((ushort)0x0004) - -#endif /* CONFIG_AMX860 */ - /*** BSEIP **********************************************************/ #ifdef CONFIG_BSEIP @@ -547,38 +514,6 @@ typedef struct scc_enet { #define SICR_ENET_CLKRT ((uint)0x00003400) #endif /* CONFIG_FLAGADM */ -/*** C2MON **********************************************************/ - -#ifdef CONFIG_C2MON - -# ifndef CONFIG_FEC_ENET /* use SCC for 10Mbps Ethernet */ -# error "Ethernet on SCC not supported on C2MON Board!" -# else /* Use FEC for Fast Ethernet */ - -#undef SCC_ENET -#define FEC_ENET - -#define PD_MII_TXD1 ((ushort)0x1000) /* PD 3 */ -#define PD_MII_TXD2 ((ushort)0x0800) /* PD 4 */ -#define PD_MII_TXD3 ((ushort)0x0400) /* PD 5 */ -#define PD_MII_RX_DV ((ushort)0x0200) /* PD 6 */ -#define PD_MII_RX_ERR ((ushort)0x0100) /* PD 7 */ -#define PD_MII_RX_CLK ((ushort)0x0080) /* PD 8 */ -#define PD_MII_TXD0 ((ushort)0x0040) /* PD 9 */ -#define PD_MII_RXD0 ((ushort)0x0020) /* PD 10 */ -#define PD_MII_TX_ERR ((ushort)0x0010) /* PD 11 */ -#define PD_MII_MDC ((ushort)0x0008) /* PD 12 */ -#define PD_MII_RXD1 ((ushort)0x0004) /* PD 13 */ -#define PD_MII_RXD2 ((ushort)0x0002) /* PD 14 */ -#define PD_MII_RXD3 ((ushort)0x0001) /* PD 15 */ - -#define PD_MII_MASK ((ushort)0x1FFF) /* PD 3...15 */ - -# endif /* CONFIG_FEC_ENET */ -#endif /* CONFIG_C2MON */ - -/*********************************************************************/ - /*** ELPT860 *********************************************************/ #ifdef CONFIG_ELPT860 @@ -828,33 +763,6 @@ typedef struct scc_enet { #endif /* CONFIG_HERMES */ -/*** IAD210 **********************************************************/ - -/* The IAD210 uses the FEC on a MPC860P for Ethernet */ - -#if defined(CONFIG_IAD210) - -# define FEC_ENET /* use FEC for Ethernet */ -# undef SCC_ENET - -# define PD_MII_TXD1 ((ushort) 0x1000 ) /* PD 3 */ -# define PD_MII_TXD2 ((ushort) 0x0800 ) /* PD 4 */ -# define PD_MII_TXD3 ((ushort) 0x0400 ) /* PD 5 */ -# define PD_MII_RX_DV ((ushort) 0x0200 ) /* PD 6 */ -# define PD_MII_RX_ERR ((ushort) 0x0100 ) /* PD 7 */ -# define PD_MII_RX_CLK ((ushort) 0x0080 ) /* PD 8 */ -# define PD_MII_TXD0 ((ushort) 0x0040 ) /* PD 9 */ -# define PD_MII_RXD0 ((ushort) 0x0020 ) /* PD 10 */ -# define PD_MII_TX_ERR ((ushort) 0x0010 ) /* PD 11 */ -# define PD_MII_MDC ((ushort) 0x0008 ) /* PD 12 */ -# define PD_MII_RXD1 ((ushort) 0x0004 ) /* PD 13 */ -# define PD_MII_RXD2 ((ushort) 0x0002 ) /* PD 14 */ -# define PD_MII_RXD3 ((ushort) 0x0001 ) /* PD 15 */ - -# define PD_MII_MASK ((ushort) 0x1FFF ) /* PD 3...15 */ - -#endif /* CONFIG_IAD210 */ - /*** ICU862 **********************************************************/ #if defined(CONFIG_ICU862) @@ -954,34 +862,6 @@ typedef struct scc_enet { #endif /* CONFIG_KUP4K */ - -/*** LANTEC *********************************************************/ - -#if defined(CONFIG_LANTEC) && CONFIG_LANTEC >= 2 -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC2 use. - */ -#define PROFF_ENET PROFF_SCC2 -#define CPM_CR_ENET CPM_CR_CH_SCC2 -#define SCC_ENET 1 -#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ -#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ -#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ -#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ - -#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ - -#define PC_ENET_LBK ((ushort)0x0010) /* PC 11 */ -#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ -#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ - -/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK2) to - * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. - */ -#define SICR_ENET_MASK ((uint)0x0000FF00) -#define SICR_ENET_CLKRT ((uint)0x00002E00) -#endif /* CONFIG_LANTEC v2 */ - /*** LWMON **********************************************************/ #if defined(CONFIG_LWMON) @@ -1373,15 +1253,14 @@ typedef struct scc_enet { #endif /* CONFIG_SXNI855T */ -/*** MVS1, TQM823L/M, TQM850L/M, TQM885D, ETX094, R360MPI **********/ +/*** MVS1, TQM823L/M, TQM850L/M, TQM885D, R360MPI **********/ #if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \ defined(CONFIG_R360MPI) || defined(CONFIG_RBC823) || \ - defined(CONFIG_TQM823L) || defined(CONFIG_TQM823M) || \ - defined(CONFIG_TQM850L) || defined(CONFIG_TQM850M) || \ - defined(CONFIG_TQM885D) || defined(CONFIG_ETX094) || \ - defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2)|| \ - (defined(CONFIG_LANTEC) && CONFIG_LANTEC < 2) + defined(CONFIG_RRVISION)|| defined(CONFIG_TQM823L) || \ + defined(CONFIG_TQM823M) || defined(CONFIG_TQM850L) || \ + defined(CONFIG_TQM850M) || defined(CONFIG_TQM885D) || \ + defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2) /* Bits in parallel I/O port registers that have to be set/cleared * to configure the pins for SCC2 use. diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index 430890c3fb..bfb9680d68 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -13,4 +13,17 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #endif +#if defined(CONFIG_CMD_FAT) && !defined(CONFIG_FS_FAT) +#define CONFIG_FS_FAT +#endif + +#if (defined(CONFIG_CMD_EXT4) || defined(CONFIG_CMD_EXT2)) && \ + !defined(CONFIG_FS_EXT4) +#define CONFIG_FS_EXT4 +#endif + +#if defined(CONFIG_CMD_EXT4_WRITE) && !defined(CONFIG_EXT4_WRITE) +#define CONFIG_EXT4_WRITE +#endif + #endif /* __CONFIG_FALLBACKS_H */ diff --git a/include/config_phylib_all_drivers.h b/include/config_phylib_all_drivers.h index 1db7cec209..12828c67e3 100644 --- a/include/config_phylib_all_drivers.h +++ b/include/config_phylib_all_drivers.h @@ -23,6 +23,7 @@ #define CONFIG_PHY_NATSEMI #define CONFIG_PHY_LXT #define CONFIG_PHY_ATHEROS +#define CONFIG_PHY_SMSC #ifdef CONFIG_PHYLIB_10G #define CONFIG_PHY_TERANETICS diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h deleted file mode 100644 index e7a6c80f62..0000000000 --- a/include/configs/AMX860.h +++ /dev/null @@ -1,299 +0,0 @@ -/* - * (C) Copyright 2001-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC860 1 -#define CONFIG_AMX860 1 - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#undef CONFIG_8xx_CONS_SMC1 /* Console is on SCC2 */ -#undef CONFIG_8xx_CONS_SMC2 -#define CONFIG_8xx_CONS_SCC2 1 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ - -#define MPC8XX_FACT 10 /* Multiply by 10 */ -#define MPC8XX_XIN 5000000 /* 5 MHz in */ -#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT)) - -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_BOOTCOMMAND \ - "bootp;" \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ - "bootm" /* autoboot command */ - -#undef CONFIG_BOOTARGS - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_SCC1_ENET 1 /* use SCC1 ethernet */ - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP - - -#if defined(CONFIG_CMD_KGDB) -#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ -#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ -#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ -#define CONFIG_KGDB_INDEX 1 /* which serial channel for kgdb */ -#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */ -#endif - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_SUBNETMASK - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0200000 /* 1 ... 4 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * U-Boot for AMX board supports two types of memory extension - * modules: one that provides 4 MB flash memory, and another one with - * 16 MB EDO DRAM. - * - * The flash module swaps the CS0 and CS1 signals: if the module is - * installed, CS0 is connected to Flash on the module and CS1 is - * connected to the on-board Flash. This means that you must intall - * U-Boot when the Flash module is plugged in, if you plan to use - * it. - * - * To enable support for the DRAM extension card, CONFIG_AMX_RAM_EXT - * must be defined. The DRAM module uses CS1. - * - * Only one of these modules may be installed at a time. If U-Boot - * is compiled with the CONFIG_AMX_RAM_EXT option set, it will not - * work if the Flash extension module is installed instead of the - * DRAM module. - */ -#define CONFIG_AMX_RAM_EXT /* 16Mb Ext. DRAM module support */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - * - * Use 4 MB for without and 8 MB with 16 MB DRAM extension module - * (CONFIG_AMX_RAM_EXT) - */ -#ifdef CONFIG_AMX_RAM_EXT -# define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -#else -# define CONFIG_SYS_BOOTMAPSZ (4 << 20) /* Initial Memory map for Linux */ -#endif -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * set the PLL, the low-power modes and the reset control (15-29) - */ -#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \ - PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR (SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00) - -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#ifndef CONFIG_AMX_RAM_EXT -#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #1 */ -#endif - -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFFC00000 /* OR addr mask */ - -/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0 */ -/* 0x00000800 0x00000400 0x00000100 0x00000030 0x00000004 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) - -#define CONFIG_SYS_OR0_PRELIM 0xFFC00954 /* Real values for the board */ -#define CONFIG_SYS_BR0_PRELIM 0x40000001 /* Real values for the board */ - -#ifndef CONFIG_AMX_RAM_EXT -#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP -#define CONFIG_SYS_OR1_PRELIM 0xFFC00954 /* Real values for the board */ -#define CONFIG_SYS_BR1_PRELIM 0x60000001 /* Real values for the board */ -#endif - -/* DSP ("Glue") Xilinx */ -#define CONFIG_SYS_OR6_PRELIM 0xFFFF8000 /* 32kB, 15 waits, cs after addr, no bursts */ -#define CONFIG_SYS_BR6_PRELIM 0x60000401 /* use GPCM for CS generation, 8 bit port */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/BMW.h b/include/configs/BMW.h deleted file mode 100644 index 633e9bd69f..0000000000 --- a/include/configs/BMW.h +++ /dev/null @@ -1,302 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * - * Configuration settings for the CU824 board. - * - */ - -/* ------------------------------------------------------------------------- */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC824X 1 -#define CONFIG_MPC8245 1 -#define CONFIG_BMW 1 - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_BOOTCOMMAND "bootm FF820000" /* autoboot command */ -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Only use Onboard TSOP-16MB device */ -#define DOC_PASSIVE_PROBE 1 -#define CONFIG_SYS_DOC_SUPPORT_2000 1 -#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM 1 -#define CONFIG_SYS_DOC_SHORT_TIMEOUT 1 - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_ELF -#undef CONFIG_CMD_NET -#undef CONFIG_CMD_NFS - - -#if 0 -#define CONFIG_PCI 1 -#define CONFIG_PCI_PNP 1 /* PCI plug-and-play */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=>" /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ - -/* Print Buffer Size - */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -#define CONFIG_SYS_MAXARGS 8 /* Max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -#define CONFIG_SYS_FLASH_BASE0_PRELIM 0xFFF00000 /* FLASH bank on RCS#0 */ -#define CONFIG_SYS_FLASH_BASE1_PRELIM 0xFF800000 /* FLASH bank on RCS#1 */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE -#define CONFIG_SYS_FLASH_BANKS { CONFIG_SYS_FLASH_BASE0_PRELIM , CONFIG_SYS_FLASH_BASE1_PRELIM } - -/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the - * reset vector is actually located at FFB00100, but the 8245 - * takes care of us. - */ -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#define CONFIG_SYS_EUMB_ADDR 0xFC000000 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (2048 << 10) /* Reserve 2MB for malloc() */ - -#define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */ - - /* Maximum amount of RAM. - */ -#define CONFIG_SYS_MAX_RAM_SIZE 0x04000000 /* 0 .. 64 MB of (S)DRAM */ - - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE -#undef CONFIG_SYS_RAMBOOT -#else -#define CONFIG_SYS_RAMBOOT -#endif - - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MONITOR_LEN -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - * For the detail description refer to the MPC8240 user's manual. - */ - -#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */ -#define CONFIG_SYS_HZ 1000 - -#define CONFIG_SYS_ETH_DEV_FN 0x7800 -#define CONFIG_SYS_ETH_IOBASE 0x00104000 - - /* Bit-field values for MCCR1. - */ -#define CONFIG_SYS_ROMNAL 0xf -#define CONFIG_SYS_ROMFAL 0x1f -#define CONFIG_SYS_DBUS_SIZE 0x3 - - /* Bit-field values for MCCR2. - */ -#define CONFIG_SYS_TSWAIT 0x5 /* Transaction Start Wait States timer */ -#define CONFIG_SYS_REFINT 0x400 /* Refresh interval FIXME: was 0t430 */ - - /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. - */ -#define CONFIG_SYS_BSTOPRE 0 /* FIXME: was 192 */ - - /* Bit-field values for MCCR3. - */ -#define CONFIG_SYS_REFREC 2 /* Refresh to activate interval */ - - /* Bit-field values for MCCR4. - */ -#define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval FIXME: was 2 */ -#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval FIXME: was 5 */ -#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latancy */ -#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */ -#define CONFIG_SYS_SDMODE_BURSTLEN 3 /* SDMODE Burst length */ -#define CONFIG_SYS_ACTORW 0xa /* FIXME was 2 */ -#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1 - -#define CONFIG_SYS_PGMAX 0x0 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/ - -#define CONFIG_SYS_SDRAM_DSCD 0x20 /* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */ - -/* Memory bank settings. - * Only bits 20-29 are actually used from these vales to set the - * start/end addresses. The upper two bits will always be 0, and the lower - * 20 bits will be 0x00000 for a start address, or 0xfffff for an end - * address. Refer to the MPC8240 book. - */ - -#define CONFIG_SYS_BANK0_START 0x00000000 -#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1) -#define CONFIG_SYS_BANK0_ENABLE 1 -#define CONFIG_SYS_BANK1_START 0x3ff00000 -#define CONFIG_SYS_BANK1_END 0x3fffffff -#define CONFIG_SYS_BANK1_ENABLE 0 -#define CONFIG_SYS_BANK2_START 0x3ff00000 -#define CONFIG_SYS_BANK2_END 0x3fffffff -#define CONFIG_SYS_BANK2_ENABLE 0 -#define CONFIG_SYS_BANK3_START 0x3ff00000 -#define CONFIG_SYS_BANK3_END 0x3fffffff -#define CONFIG_SYS_BANK3_ENABLE 0 -#define CONFIG_SYS_BANK4_START 0x3ff00000 -#define CONFIG_SYS_BANK4_END 0x3fffffff -#define CONFIG_SYS_BANK4_ENABLE 0 -#define CONFIG_SYS_BANK5_START 0x3ff00000 -#define CONFIG_SYS_BANK5_END 0x3fffffff -#define CONFIG_SYS_BANK5_ENABLE 0 -#define CONFIG_SYS_BANK6_START 0x3ff00000 -#define CONFIG_SYS_BANK6_END 0x3fffffff -#define CONFIG_SYS_BANK6_ENABLE 0 -#define CONFIG_SYS_BANK7_START 0x3ff00000 -#define CONFIG_SYS_BANK7_END 0x3fffffff -#define CONFIG_SYS_BANK7_ENABLE 0 - -#define CONFIG_SYS_ODCR 0xff - -#define CONFIG_PCI 1 /* Include PCI support */ -#undef CONFIG_PCI_PNP - -/* PCI Memory space(s) */ -#define PCI_MEM_SPACE1_START 0x80000000 -#define PCI_MEM_SPACE2_START 0xfd000000 - -/* ROM Spaces */ -#include "../board/bmw/bmw.h" - -/* BAT configuration */ -#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) -#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT1L (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT) -#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) - -#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L -#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U -#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L -#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L -#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L -#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 0 /* Max number of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* Max number of sectors per flash */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -/* - * Warining: environment is not EMBEDDED in the U-Boot code. - * It's stored in flash separately. - */ -#define CONFIG_ENV_IS_IN_NVRAM 1 -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE 1 -#define CONFIG_ENV_ADDR 0x7c004000 /* right at the start of NVRAM */ -#define CONFIG_ENV_SIZE 0x1ff0 /* Size of the Environment - 8K */ -#define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */ - -/* - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#endif /* __CONFIG_H */ diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h index fc226f1984..e102c365c4 100644 --- a/include/configs/CPC45.h +++ b/include/configs/CPC45.h @@ -480,6 +480,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h deleted file mode 100644 index 2703625677..0000000000 --- a/include/configs/ETX094.h +++ /dev/null @@ -1,357 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC850 1 /* This is a MPC850 CPU */ -#define CONFIG_ETX094 1 /* ...on a ETX_094 board */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 57600 -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_BOARD_TYPES 1 /* support board types */ - -#define CONFIG_FLASH_16BIT /* for board with 16bit wide flash */ -#undef SB_ETX094 /* only for SB-Board with 16MB SDRAM */ -#define CONFIG_BOOTP_RANDOM_DELAY /* graceful BOOTP recovery mode */ - -#define CONFIG_ETHADDR 08:00:06:00:00:00 - -#ifdef CONFIG_ETHADDR -#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 /* default MAC can be overwritten once */ -#endif - -#undef CONFIG_BOOTARGS -#define CONFIG_RAMBOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/ram rw ramdisk_size=4690 " \ - "U-Boot_version=U-Boot-1.0.x-Date " \ - "panic=1 " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" -#define CONFIG_NFSBOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${nfsip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" -#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#define CONFIG_WATCHDOG 1 /* watchdog enabled */ - -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0300000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0700000 /* 3 ... 7 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#ifdef DEBUG -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#ifdef CONFIG_FLASH_16BIT -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */ -#else -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ -#endif - -/*----------------------------------------------------------------------- - * Hardware Information Block - */ -#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ -#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */ -#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif /* CONFIG_WATCHDOG */ - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - leave PLL multiplication factor unchanged ! - */ -#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -#define CONFIG_SYS_SCCR (SCCR_TBS | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 1, CSNT = 0, SCY = 2, EHTR = 0 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV2 | OR_BI | \ - OR_SCY_2_CLK | OR_TRLX ) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) - -#ifdef CONFIG_FLASH_16BIT /* 16 bit data port */ -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16) -#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16) -#else /* 32 bit data port */ -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32) -#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32) -#endif /* CONFIG_FLASH_16BIT */ - -#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM - -/* - * BR2/3 and OR2/3 (SDRAM) - * - */ -#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 - -#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 23 /* start with divider for 100 MHz */ - -/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X) -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_1X) - -#endif /* __CONFIG_H */ diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h deleted file mode 100644 index 94b05dce41..0000000000 --- a/include/configs/IAD210.h +++ /dev/null @@ -1,381 +0,0 @@ -/* - * (C) Copyright 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <mpc8xx_irq.h> - - -# ifdef DEBUG -# warning DEBUG Defined -# endif /* DEBUG */ - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC860 1 -#define CONFIG_IAD210 1 /* ...on a IAD210 module */ -#define CONFIG_MPC860T 1 -#define CONFIG_MPC862 1 - -#define CONFIG_SYS_TEXT_BASE 0x08000000 - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ - -#undef CONFIG_8xx_CONS_SMC1 -#undef CONFIG_8xx_CONS_SMC2 -#define CONFIG_8xx_CONS_SCC2 /* V24 on SCC2 */ -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 - - -# define MPC8XX_FACT 16 -# define CONFIG_8xx_GCLK_FREQ (64000000L) /* define if can't use get_gclk_freq */ -# define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#if 0 -# define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -# define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" - -/* using this define saves us updating another source file */ -#define CONFIG_BOARD_EARLY_INIT_F 1 -#define CONFIG_MISC_INIT_R - -#undef CONFIG_BOOTARGS -/* #define CONFIG_BOOTCOMMAND \ - "bootp;" \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;" \ - "bootm" -*/ - -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs root=/dev/nfs" \ - "ip=192.168.28.129:139.10.137.138:192.168.28.1:255.255.255.0:iadlinux002::off; " \ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* #define CONFIG_STATUS_LED 1*/ /* Status LED enabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -# undef CONFIG_SCC1_ENET /* disable SCC1 ethernet */ -# define CONFIG_FEC_ENET 1 /* use FEC ethernet */ -# define CONFIG_MII 1 -# define CONFIG_SYS_DISCOVER_PHY 1 -# define CONFIG_FEC_UTOPIA 1 -# define CONFIG_ETHADDR 08:00:06:26:A2:6D -# define CONFIG_IPADDR 192.168.28.128 -# define CONFIG_SERVERIP 139.10.137.138 -# define CONFIG_SYS_DISCOVER_PHY 1 - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -/* enable I2C and select the hardware/software driver */ -#undef CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -# define CONFIG_SYS_I2C_SPEED 50000 -# define CONFIG_SYS_I2C_SLAVE 0xDD -# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -/* - * Software (bit-bang) I2C driver configuration - */ -#define PB_SCL 0x00000020 /* PB 26 */ -#define PB_SDA 0x00000010 /* PB 27 */ - -#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) -#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) -#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) -#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) -#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ - else immr->im_cpm.cp_pbdat &= ~PB_SDA -#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ - else immr->im_cpm.cp_pbdat &= ~PB_SCL -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DATE - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0400000 /* 1 ... 4 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 -#define CONFIG_SYS_IMMR_SIZE ((uint)(64 * 1024)) - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x08000000 -#define CONFIG_SYS_FLASH_SIZE ((uint)(4 * 1024 * 1024)) /* max 16Mbyte */ - -#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100 - -#if defined(DEBUG) -# define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -# define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif - -# define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -# define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x8000 -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * set the PLL, the low-power modes and the reset control (15-29) - */ -#define CONFIG_SYS_PLPRCR (((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) | \ - PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 - -#define CONFIG_SYS_SCCR (SCCR_TBS | SCCR_COM00 | SCCR_DFSYNC00 | \ - SCCR_DFBRG00 | SCCR_DFNL000 | SCCR_DFNH000 | \ - SCCR_DFLCD000 |SCCR_DFALCD00 ) - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration Register 19-4 - *----------------------------------------------------------------------- - */ -/* +0x09C4 => DRQP = 10 (IDMA requests have lowest priority) */ -#define CONFIG_SYS_RCCR 0x0020 - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - */ -#define PCMCIA_MEM_ADDR ((uint)0xff020000) -#define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* Because of the way the 860 starts up and assigns CS0 the -* entire address space, we have to set the memory controller -* differently. Normally, you write the option register -* first, and then enable the chip select by writing the -* base register. For CS0, you must write the base register -* first, followed by the option register. -*/ - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ - -#define FLASH_BASE0_PRELIM CONFIG_SYS_FLASH_BASE /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0xF8000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xF8000000 /* OR addr mask */ - -/* FLASH timing: - TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | \ - OR_SCY_3_CLK | OR_EHTR) - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) - -/* - * BR2/3 and OR2/3 (SDRAM) - * - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ - -#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | OR_CSNT_SAM | OR_BI | OR_ACS_DIV4) -#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) -#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V) - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 124 /* start with divider for 64 MHz */ - -/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -#define CONFIG_SYS_MAMR ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_8X) - -#ifdef CONFIG_MPC860T - -/* Interrupt level assignments. -*/ -#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */ - -#endif /* CONFIG_MPC860T */ - - -#endif /* __CONFIG_H */ diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h index 81f219c9b5..b58b6f638c 100644 --- a/include/configs/ICU862.h +++ b/include/configs/ICU862.h @@ -349,6 +349,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h index f98a66bf24..092fcf0641 100644 --- a/include/configs/IVML24.h +++ b/include/configs/IVML24.h @@ -318,6 +318,8 @@ * IDE/ATA stuff *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ +#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */ #define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */ #define CONFIG_IDE_RESET 1 /* reset for ide supported */ diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h index d6e9b2381d..38837cab46 100644 --- a/include/configs/IVMS8.h +++ b/include/configs/IVMS8.h @@ -312,6 +312,8 @@ * IDE/ATA stuff *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ +#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */ #define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */ #define CONFIG_IDE_RESET 1 /* reset for ide supported */ diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index c0035e65de..dae9b8c079 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -353,6 +353,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h index 5084cccad8..cceee96742 100644 --- a/include/configs/KUP4X.h +++ b/include/configs/KUP4X.h @@ -366,6 +366,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h deleted file mode 100644 index c3855c332c..0000000000 --- a/include/configs/LANTEC.h +++ /dev/null @@ -1,358 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * (C) Copyright 2001 - * Torsten Stevens, FHG IMS, stevens@ims.fhg.de - * Bruno Achauer, Exet AG, bruno@exet-ag.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * board/config.h - configuration options, board specific - * [derived from config_TQM850L.h] - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC850 1 /* This is a MPC850 CPU */ -#define CONFIG_LANTEC 2 /* ...on a Lantec rev.2 board */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -/* - * Port assignments (CONFIG_LANTEC == 1): - * - SMC1: J11 (MDB) ? - * - SMC2: J6 (Feature connector) - * - SCC2: J9 (RJ45) - * - SCC3: J8 (Sub-D9) - * - * Port assignments (CONFIG_LANTEC == 2): TBD - */ - - -#undef CONFIG_8xx_CONS_SMC2 /* Console is on SMC2 */ -#define CONFIG_8xx_CONS_SCC3 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs root=/dev/ram panic=5;bootm 40040000 400A0000" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#define CONFIG_STATUS_LED 1 /* Status LED enabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_CDP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_FAT -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_PING -#define CONFIG_CMD_PORTIO -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -#undef CONFIG_CMD_XIMG - -#if !(CONFIG_LANTEC >= 2) - #undef CONFIG_CMD_DATE - #undef CONFIG_CMD_NET -#endif - - -#if CONFIG_LANTEC >= 2 -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_DLK) - -/*----------------------------------------------------------------------- - * Clock Setting - Has the Lantec board a 32kHz clock ??? [XXX] - *----------------------------------------------------------------------- - */ -#define CONFIG_8xx_GCLK_FREQ 33000000 - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! - */ - /* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 - /* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_SCCR (SCCR_TBS | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/5 and OR0/5 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#define FLASH_BASE5_PRELIM 0x60000000 /* FLASH bank #1 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* FLASH timing */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_BI | \ - OR_SCY_5_CLK | OR_TRLX) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) - -#define CONFIG_SYS_OR5_REMAP CONFIG_SYS_OR0_REMAP -#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_OR0_PRELIM -#define CONFIG_SYS_BR5_PRELIM ((FLASH_BASE5_PRELIM & BR_BA_MSK) | BR_V ) - -/* - * BR2/3 and OR2/3 (SDRAM) - * - */ -#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ - -/* SDRAM timing: Multiplexed addresses */ -#define CONFIG_SYS_OR_TIMING_SDRAM (OR_CSNT_SAM) - -#define CONFIG_SYS_OR3_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* - * Memory Periodic Timer Prescaler - */ - -/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL \ - ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "" -#define MTDPARTS_DEFAULT "" -*/ - -#endif /* __CONFIG_H */ diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h new file mode 100644 index 0000000000..3be2f8ef33 --- /dev/null +++ b/include/configs/M54418TWR.h @@ -0,0 +1,448 @@ +/* + * Configuation settings for the Freescale MCF54418 TWR board. + * + * Copyright 2010-2012 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * board/config.h - configuration options, board specific + */ + +#ifndef _M54418TWR_H +#define _M54418TWR_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_MCF5441x /* define processor family */ +#define CONFIG_M54418 /* define processor type */ +#define CONFIG_M54418TWR /* M54418TWR board */ + +#define CONFIG_MCFUART +#define CONFIG_SYS_UART_PORT (0) +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } + +#undef CONFIG_WATCHDOG + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* Command line configuration */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_BOOTD +#define CONFIG_CMD_CACHE +#undef CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_I2C +#undef CONFIG_CMD_JFFS2 +#undef CONFIG_CMD_UBI +#define CONFIG_CMD_MEMORY +#define CONFIG_CMD_MISC +#define CONFIG_CMD_MII +#undef CONFIG_CMD_NAND +#undef CONFIG_CMD_NAND_YAFFS +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SF +#undef CONFIG_CMD_IMLS + +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS + +/* + * NAND FLASH + */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_JFFS2_NAND +#define CONFIG_NAND_FSL_NFC +#define CONFIG_SYS_NAND_BASE 0xFC0FC000 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE +#define CONFIG_SYS_NAND_SELECT_DEVICE +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ +#endif + +/* Network configuration */ +#define CONFIG_MCFFEC +#ifdef CONFIG_MCFFEC +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 +#define CONFIG_MII_INIT 1 +#define CONFIG_SYS_DISCOVER_PHY +#define CONFIG_SYS_RX_ETH_BUFFER 2 +#define CONFIG_SYS_FAULT_ECCONFIG_SYS_NO_FLASHHO_LINK_DOWN +#define CONFIG_SYS_TX_ETH_BUFFER 2 +#define CONFIG_HAS_ETH1 + +#define CONFIG_SYS_FEC0_PINMUX 0 +#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE +#define CONFIG_SYS_FEC1_PINMUX 0 +#define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_MIIBASE +#define MCFFEC_TOUT_LOOP 50000 +#define CONFIG_SYS_FEC0_PHYADDR 0 +#define CONFIG_SYS_FEC1_PHYADDR 1 + +#define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */ + +#ifdef CONFIG_SYS_NAND_BOOT +#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rw rootfstype=jffs2 " \ + "mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro," \ + "-(jffs2) console=ttyS0,115200" +#else +#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=" \ + __stringify(CONFIG_SERVERIP) ":/tftpboot/" \ + __stringify(CONFIG_IPADDR) " ip=" \ + __stringify(CONFIG_IPADDR) ":" \ + __stringify(CONFIG_SERVERIP)":" \ + __stringify(CONFIG_GATEWAYIP)": " \ + __stringify(CONFIG_NETMASK) \ + "::eth0:off:rw console=ttyS0,115200" +#endif + +#define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 +#define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 +#define CONFIG_ETHPRIME "FEC0" +#define CONFIG_IPADDR 192.168.1.2 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_SERVERIP 192.168.1.1 +#define CONFIG_GATEWAYIP 192.168.1.1 + +#define CONFIG_OVERWRITE_ETHADDR_ONCE +#define CONFIG_SYS_FEC_BUF_USE_SRAM +/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ +#ifndef CONFIG_SYS_DISCOVER_PHY +#define FECDUPLEX FULL +#define FECSPEED _100BASET +#define LINKSTATUS 1 +#else +#define LINKSTATUS 0 +#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN +#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN +#endif +#endif /* CONFIG_SYS_DISCOVER_PHY */ +#endif + +#define CONFIG_HOSTNAME M54418TWR + +#if defined(CONFIG_CF_SBF) +/* ST Micro serial flash */ +#define CONFIG_SYS_LOAD_ADDR2 0x40010007 +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ + "loadaddr=0x40010000\0" \ + "sbfhdr=sbfhdr.bin\0" \ + "uboot=u-boot.bin\0" \ + "load=tftp ${loadaddr} ${sbfhdr};" \ + "tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \ + "upd=run load; run prog\0" \ + "prog=sf probe 0:1 1000000 3;" \ + "sf erase 0 40000;" \ + "sf write ${loadaddr} 0 40000;" \ + "save\0" \ + "" +#elif defined(CONFIG_SYS_NAND_BOOT) +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ + "loadaddr=0x40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr} ${u-boot};\0" \ + "upd=run load; run prog\0" \ + "prog=nand device 0;" \ + "nand erase 0 40000;" \ + "nb_update ${loadaddr} ${filesize};" \ + "save\0" \ + "" +#else +#define CONFIG_SYS_UBOOT_END 0x3FFFF +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \ + "loadaddr=40010000\0" \ + "u-boot=u-boot.bin\0" \ + "load=tftp ${loadaddr) ${u-boot}\0" \ + "upd=run load; run prog\0" \ + "prog=prot off mram" " ;" \ + "cp.b ${loadaddr} 0 ${filesize};" \ + "save\0" \ + "" +#endif + +/* Realtime clock */ +#undef CONFIG_MCFRTC +#define CONFIG_RTC_MCFRRTC +#define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000 + +/* Timer */ +#define CONFIG_MCFTMR +#undef CONFIG_MCFPIT + +/* I2c */ +#undef CONFIG_FSL_I2C +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +/* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SPEED 80000 +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x58000 +#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR + +/* DSPI and Serial Flash */ +#define CONFIG_CF_SPI +#define CONFIG_CF_DSPI +#define CONFIG_SERIAL_FLASH +#define CONFIG_HARD_SPI +#define CONFIG_SYS_SBFHDR_SIZE 0x7 +#ifdef CONFIG_CMD_SPI +# define CONFIG_SPI_FLASH +# define CONFIG_SPI_FLASH_ATMEL + +# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ + DSPI_CTAR_PCSSCK_1CLK | \ + DSPI_CTAR_PASC(0) | \ + DSPI_CTAR_PDT(0) | \ + DSPI_CTAR_CSSCK(0) | \ + DSPI_CTAR_ASC(0) | \ + DSPI_CTAR_DT(1)) +# define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0) +# define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0) +#endif + +/* Input, PCI, Flexbus, and VCO */ +#define CONFIG_EXTRA_CLOCK + +#define CONFIG_PRAM 2048 /* 2048 KB */ + +/* HUSH */ +#define CONFIG_SYS_HUSH_PARSER 1 +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +#define CONFIG_SYS_PROMPT "-> " +#define CONFIG_SYS_LONGHELP /* undef to save memory */ + +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_SYS_MBAR 0xFC000000 + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 +/* End of used area in internal SRAM */ +#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 +#define CONFIG_SYS_INIT_RAM_CTRL 0x221 +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 256 +#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - \ + CONFIG_SYS_GBL_DATA_SIZE) - 32) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + */ +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_SDRAM_SIZE 128 /* SDRAM size in MB */ + +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400) +#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) +#define CONFIG_SYS_DRAM_TEST + +#if defined(CONFIG_CF_SBF) || defined(CONFIG_SYS_NAND_BOOT) +#define CONFIG_SERIAL_BOOT +#endif + +#if defined(CONFIG_SERIAL_BOOT) +#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400) +#else +#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) +#endif + +#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) +/* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MONITOR_LEN (256 << 10) +/* Reserve 256 kB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (256 << 10) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization ?? + */ +/* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \ + (CONFIG_SYS_SDRAM_SIZE << 20)) + +/* Configuration for environment + * Environment is embedded in u-boot in the second sector of the flash + */ +#if !defined(CONFIG_SERIAL_BOOT) /*MRAM boot*/ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_MRAM 1 +#define CONFIG_ENV_ADDR (0x40000 - 0x1000) /*MRAM size 40000*/ +#define CONFIG_ENV_SIZE 0x1000 +#endif + +#if defined(CONFIG_CF_SBF) +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_SPI_FLASH 1 +#define CONFIG_ENV_SPI_CS 1 +#define CONFIG_ENV_OFFSET 0x40000 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#endif +#if defined(CONFIG_SYS_NAND_BOOT) +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_OFFSET 0x80000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#endif +#undef CONFIG_ENV_OVERWRITE + +/* FLASH organization */ +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE + +#undef CONFIG_SYS_FLASH_CFI +#ifdef CONFIG_SYS_FLASH_CFI + +#define CONFIG_FLASH_CFI_DRIVER 1 +/* Max size that the board might have */ +#define CONFIG_SYS_FLASH_SIZE 0x1000000 +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +/* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 270 +/* "Real" (hardware) sectors protection */ +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_FLASH_CHECKSUM +#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE } +#else +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 270 +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 0 +#endif + +/* + * This is setting for JFFS2 support in u-boot. + * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. + */ +#ifdef CONFIG_CMD_JFFS2 +#define CONFIG_JFFS2_DEV "nand0" +#define CONFIG_JFFS2_PART_OFFSET (0x800000) +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define MTDIDS_DEFAULT "nand0=m54418twr.nand" + +#define MTDPARTS_DEFAULT "mtdparts=m54418twr.nand:1m(data)," \ + "7m(kernel)," \ + "-(rootfs)" + +#endif + +#ifdef CONFIG_CMD_UBI +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE /* needed for mtdparts command */ +#define CONFIG_MTD_PARTITIONS /* mtdparts and UBI support */ +#define CONFIG_RBTREE +#define MTDIDS_DEFAULT "nand0=NAND" +#define MTDPARTS_DEFAULT "mtdparts=NAND:1m(u-boot)," \ + "-(ubi)" +#endif +/* Cache Configuration */ +#define CONFIG_SYS_CACHELINE_SIZE 16 +#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 4) +#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) +#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) +#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ + CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ + CF_ACR_EN | CF_ACR_SM_ALL) +#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ + CF_CACR_ICINVA | CF_CACR_EUSP) +#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ + CF_CACR_DEC | CF_CACR_DDCM_P | \ + CF_CACR_DCINVA) & ~CF_CACR_ICINVA) + +#define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - 12) + +/*----------------------------------------------------------------------- + * Memory bank definitions + */ +/* + * CS0 - NOR Flash 16MB + * CS1 - Available + * CS2 - Available + * CS3 - Available + * CS4 - Available + * CS5 - Available + */ + + /* Flash */ +#define CONFIG_SYS_CS0_BASE 0x00000000 +#define CONFIG_SYS_CS0_MASK 0x000F0101 +#define CONFIG_SYS_CS0_CTRL 0x00001D60 + +#endif /* _M54418TWR_H */ diff --git a/include/configs/MBX.h b/include/configs/MBX.h index e8d0cd775b..7145cc4446 100644 --- a/include/configs/MBX.h +++ b/include/configs/MBX.h @@ -276,6 +276,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h index a1fbece8e8..95a1885ace 100644 --- a/include/configs/MPC8308RDB.h +++ b/include/configs/MPC8308RDB.h @@ -30,6 +30,7 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_MPC83xx 1 /* MPC83xx family */ +#define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ #define CONFIG_MPC8308RDB 1 /* MPC8308RDB board specific */ diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index 604938d8b1..074e01f0fa 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -629,6 +629,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h index 9f462f4b5e..f4184fcd8f 100644 --- a/include/configs/NSCU.h +++ b/include/configs/NSCU.h @@ -318,6 +318,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/P3041DS.h b/include/configs/P3041DS.h index 98e7a42e5f..cf184e74ab 100644 --- a/include/configs/P3041DS.h +++ b/include/configs/P3041DS.h @@ -36,6 +36,10 @@ #define CONFIG_PCIE4 #define CONFIG_SYS_DPAA_RMAN +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #include "corenet_ds.h" diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h index d6f2f5ceb8..53979dddf2 100644 --- a/include/configs/P4080DS.h +++ b/include/configs/P4080DS.h @@ -33,6 +33,10 @@ #define CONFIG_MMC #define CONFIG_PCIE3 +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 ref clk freq */ #include "corenet_ds.h" diff --git a/include/configs/P5020DS.h b/include/configs/P5020DS.h index 8625f76290..7018d7a322 100644 --- a/include/configs/P5020DS.h +++ b/include/configs/P5020DS.h @@ -37,6 +37,10 @@ #define CONFIG_SYS_FSL_RAID_ENGINE #define CONFIG_SYS_DPAA_RMAN +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ #include "corenet_ds.h" diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h index 9befacbaba..868a0b8044 100644 --- a/include/configs/R360MPI.h +++ b/include/configs/R360MPI.h @@ -329,6 +329,7 @@ */ #if 1 +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h index b215c2d642..3595200c45 100644 --- a/include/configs/RPXClassic.h +++ b/include/configs/RPXClassic.h @@ -314,6 +314,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h index 8ffb014fe8..563abea95e 100644 --- a/include/configs/RPXlite.h +++ b/include/configs/RPXlite.h @@ -249,6 +249,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h index f8bcf0fae2..67ab1e962b 100644 --- a/include/configs/RPXlite_DW.h +++ b/include/configs/RPXlite_DW.h @@ -335,6 +335,7 @@ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h index 671d52168a..e2b22f0bae 100644 --- a/include/configs/RRvision.h +++ b/include/configs/RRvision.h @@ -329,6 +329,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h deleted file mode 100644 index d448bf6650..0000000000 --- a/include/configs/SBC8540.h +++ /dev/null @@ -1,428 +0,0 @@ -/* - * (C) Copyright 2002,2003 Motorola,Inc. - * Xianghua Xiao <X.Xiao@motorola.com> - * - * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>. - * Added support for Wind River SBC8540 board - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * sbc8540 board configuration file. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Top level Makefile configuration choices - */ -#ifdef CONFIG_66 -#define CONFIG_PCI_66 -#endif - -#define TSEC_DEBUG - -/* - * High Level Configuration Options - */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ -#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */ - -#define CONFIG_SYS_TEXT_BASE 0xfffc0000 - - -#define CONFIG_CPM2 1 /* has CPM2 */ - -#define CONFIG_SBC8540 1 /* configuration for SBC8560 board */ -#define CONFIG_MPC8540 1 - -#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific (supplement) */ - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#undef CONFIG_PCI /* pci ethernet support */ -#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ - -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ - -#define CONFIG_ENV_OVERWRITE - -/* Using Localbus SDRAM to emulate flash before we can program the flash, - * normally you need a flash-boot image(u-boot.bin), if so undef this. - */ -#undef CONFIG_RAM_AS_FLASH - -#if defined(CONFIG_PCI_66) /* some PCI card is 33Mhz only */ - #define CONFIG_SYS_CLK_FREQ 66000000 /* sysclk for MPC85xx */ -#else - #define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */ -#endif - -/* below can be toggled for performance analysis. otherwise use default */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#undef CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ - -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \ - defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \ - defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC)) -#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC." -#endif - -#define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */ - -/* DDR Setup */ -#define CONFIG_FSL_DDR1 -#undef CONFIG_FSL_DDR_INTERACTIVE -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#undef CONFIG_DDR_SPD - -#if defined(CONFIG_MPC85xx_REV1) -#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */ -#endif - -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -/* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS 0x55 /* CTLR 0 DIMM 0 */ - -#undef CONFIG_CLOCKS_IN_MHZ - -#if defined(CONFIG_RAM_AS_FLASH) - #define CONFIG_SYS_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */ - #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH 8M */ - #define CONFIG_SYS_BR0_PRELIM 0xf8000801 /* port size 8bit */ - #define CONFIG_SYS_OR0_PRELIM 0xf8000ff7 /* 8MB Flash */ -#else /* Boot from real Flash */ - #define CONFIG_SYS_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */ - #define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of FLASH 8M */ - #define CONFIG_SYS_BR0_PRELIM 0xff800801 /* port size 8bit */ - #define CONFIG_SYS_OR0_PRELIM 0xff800ff7 /* 8MB Flash */ -#endif -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - -/* local bus definitions */ -#define CONFIG_SYS_BR1_PRELIM 0xe4001801 /* 64M, 32-bit flash */ -#define CONFIG_SYS_OR1_PRELIM 0xfc000ff7 - -#define CONFIG_SYS_BR2_PRELIM 0x00000000 /* CS2 not used */ -#define CONFIG_SYS_OR2_PRELIM 0x00000000 - -#define CONFIG_SYS_BR3_PRELIM 0xf0001861 /* 64MB localbus SDRAM */ -#define CONFIG_SYS_OR3_PRELIM 0xfc000cc1 - -#if defined(CONFIG_RAM_AS_FLASH) - #define CONFIG_SYS_BR4_PRELIM 0xf4001861 /* 64M localbus SDRAM */ -#else - #define CONFIG_SYS_BR4_PRELIM 0xf8001861 /* 64M localbus SDRAM */ -#endif -#define CONFIG_SYS_OR4_PRELIM 0xfc000cc1 - -#define CONFIG_SYS_BR5_PRELIM 0xfc000801 /* 16M CS5 misc devices */ -#if 1 - #define CONFIG_SYS_OR5_PRELIM 0xff000ff7 -#else - #define CONFIG_SYS_OR5_PRELIM 0xff0000f0 -#endif - -#define CONFIG_SYS_BR6_PRELIM 0xe0001801 /* 64M, 32-bit flash */ -#define CONFIG_SYS_OR6_PRELIM 0xfc000ff7 -#define CONFIG_SYS_LBC_LCRR 0x00030002 /* local bus freq */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 -#define CONFIG_SYS_LBC_LSRT 0x20000000 -#define CONFIG_SYS_LBC_MRTPR 0x20000000 -#define CONFIG_SYS_LBC_LSDMR_1 0x2861b723 -#define CONFIG_SYS_LBC_LSDMR_2 0x0861b723 -#define CONFIG_SYS_LBC_LSDMR_3 0x0861b723 -#define CONFIG_SYS_LBC_LSDMR_4 0x1861b723 -#define CONFIG_SYS_LBC_LSDMR_5 0x4061b723 - -/* just hijack the MOT BCSR def for SBC8560 misc devices */ -#define CONFIG_SYS_BCSR ((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000) -/* the size of CS5 needs to be >= 16M for TLB and LAW setups */ - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ - -/* Serial Port */ -#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#if 0 -#define CONFIG_SYS_NS16550_CLK 1843200 /* get_bus_freq(0) */ -#else -#define CONFIG_SYS_NS16550_CLK 264000000 /* get_bus_freq(0) */ -#endif - -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#if 0 -#define CONFIG_SYS_NS16550_COM1 ((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00700000) -#define CONFIG_SYS_NS16550_COM2 ((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00800000) -#else -/* SBC8540 uses internal COMM controller */ -#define CONFIG_SYS_NS16550_COM1 ((CONFIG_SYS_CCSRBAR & 0xfff00000)+0x00004500) -#define CONFIG_SYS_NS16550_COM2 ((CONFIG_SYS_CCSRBAR & 0xfff00000)+0x00004600) -#endif - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* - * I2C - */ -#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ -#define CONFIG_SYS_I2C_OFFSET 0x3000 - -#define CONFIG_SYS_PCI_MEM_BASE 0xC0000000 -#define CONFIG_SYS_PCI_MEM_PHYS 0xC0000000 -#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 - -#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */ - -# define CONFIG_MPC85xx_TSEC1 -# define CONFIG_MPC85xx_TSEC1_NAME "TSEC0" -# define CONFIG_MII 1 /* MII PHY management */ -# define TSEC1_PHY_ADDR 25 -# define TSEC1_PHYIDX 0 -/* Options are: TSEC0 */ -# define CONFIG_ETHPRIME "TSEC0" - - -#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ - - #undef CONFIG_ETHER_NONE /* define if ether on something else */ - #define CONFIG_ETHER_ON_FCC2 /* cpm FCC ethernet support */ - #define CONFIG_ETHER_INDEX 2 /* which channel for ether */ - - #if (CONFIG_ETHER_INDEX == 2) - /* - * - Rx-CLK is CLK13 - * - Tx-CLK is CLK14 - * - Select bus for bd/buffers - * - Full duplex - */ - #define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) - #define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) - #define CONFIG_SYS_CPMFCR_RAMTYPE 0 - #define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE) - - #elif (CONFIG_ETHER_INDEX == 3) - /* need more definitions here for FE3 */ - #endif /* CONFIG_ETHER_INDEX */ - - #define CONFIG_MII /* MII PHY management */ - #define CONFIG_BITBANGMII /* bit-bang MII PHY management */ - /* - * GPIO pins used for bit-banged MII communications - */ - #define MDIO_PORT 2 /* Port C */ - #define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) - #define MDC_DECLARE MDIO_DECLARE - - #define MDIO_ACTIVE (iop->pdir |= 0x00400000) - #define MDIO_TRISTATE (iop->pdir &= ~0x00400000) - #define MDIO_READ ((iop->pdat & 0x00400000) != 0) - - #define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ - else iop->pdat &= ~0x00400000 - - #define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ - else iop->pdat &= ~0x00200000 - - #define MIIDELAY udelay(1) - -#endif - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#if 0 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION /* use hardware protection */ -#endif -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#if 0 -/* XXX This doesn't work and I don't want to fix it */ -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) - #define CONFIG_SYS_RAMBOOT -#else - #undef CONFIG_SYS_RAMBOOT -#endif -#endif - -/* Environment */ -#if !defined(CONFIG_SYS_RAMBOOT) - #if defined(CONFIG_RAM_AS_FLASH) - #define CONFIG_ENV_IS_NOWHERE - #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x100000) - #define CONFIG_ENV_SIZE 0x2000 - #else - #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) - #define CONFIG_ENV_SIZE 0x2000 /* CONFIG_ENV_SECT_SIZE */ - #endif -#else - #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ - #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) - #define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600" -/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/ -#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000" -#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - -#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_CMD_MII -#endif - -#if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "SBC8540=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ - #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/*Note: change below for your network setting!!! */ -#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) -# define CONFIG_ETHADDR 00:vv:ww:xx:yy:8a -# define CONFIG_HAS_ETH1 -# define CONFIG_ETH1ADDR 00:vv:ww:xx:yy:8b -# define CONFIG_HAS_ETH2 -# define CONFIG_ETH2ADDR 00:vv:ww:xx:yy:8c -#endif - -#define CONFIG_SERVERIP YourServerIP -#define CONFIG_IPADDR YourTargetIP -#define CONFIG_GATEWAYIP YourGatewayIP -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_HOSTNAME SBC8560 -#define CONFIG_ROOTPATH "YourRootPath" -#define CONFIG_BOOTFILE "YourImageName" - -#endif /* __CONFIG_H */ diff --git a/include/configs/SCM.h b/include/configs/SCM.h deleted file mode 100644 index 87d52babe6..0000000000 --- a/include/configs/SCM.h +++ /dev/null @@ -1,710 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC8260 1 /* This is a MPC8260 CPU */ -#define CONFIG_TQM8260 200 /* ...on a TQM8260 module Rev.200 */ -#define CONFIG_SCM 1 /* ...on a System Controller Module */ -#define CONFIG_CPM2 1 /* Has a CPM2 */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#if (CONFIG_TQM8260 <= 100) -# error "TQM8260 module revison not supported" -#endif - -/* We use a TQM8260 module with a 300MHz CPU */ -#define CONFIG_300MHz - -/* Define 60x busmode only if your TQM8260 has L2 cache! */ -#ifdef CONFIG_L2_CACHE -# define CONFIG_BUSMODE_60x 1 /* bus mode: 60x */ -#else -# undef CONFIG_BUSMODE_60x /* bus mode: 8260 */ -#endif - -/* The board with 300MHz CPU doesn't have L2 cache, but works in 60x bus mode */ -#ifdef CONFIG_300MHz -# define CONFIG_BUSMODE_60x -#endif - -#define CONFIG_82xx_CONS_SMC1 1 /* console on SMC1 */ - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -/* enable I2C and select the hardware/software driver */ -#undef CONFIG_HARD_I2C /* I2C with hardware support */ -#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F - -/* - * Software (bit-bang) I2C driver configuration - */ - -#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00010000) -#define I2C_TRISTATE (iop->pdir &= ~0x00010000) -#define I2C_READ ((iop->pdat & 0x00010000) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \ - else iop->pdat &= ~0x00010000 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \ - else iop->pdat &= ~0x00020000 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -#define CONFIG_I2C_X - -/* - * select serial console configuration - * - * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - * - * if CONFIG_CONS_NONE is defined, then the serial console routines must - * defined elsewhere (for example, on the cogent platform, there are serial - * ports on the motherboard which are used for the serial console - see - * cogent/cma101/serial.[ch]). - */ -#define CONFIG_CONS_ON_SMC /* define if console on SMC */ -#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else*/ -#ifdef CONFIG_82xx_CONS_SMC1 -#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ -#endif -#ifdef CONFIG_82xx_CONS_SMC2 -#define CONFIG_CONS_INDEX 2 /* which serial channel for console */ -#endif - -#undef CONFIG_CONS_USE_EXTC /* SMC/SCC use ext clock not brg_clk */ -#define CONFIG_CONS_EXTC_RATE 3686400 /* SMC/SCC ext clk rate in Hz */ -#define CONFIG_CONS_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9 */ - -/* - * select ethernet configuration - * - * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then - * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 - * for FCC) - * - * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. - * - * (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the - * X.29 connector, and FCC2 is hardwired to the X.1 connector) - */ -#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ -#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ -#undef CONFIG_ETHER_NONE /* define if ether on something else */ -#define CONFIG_ETHER_INDEX 1 /* which SCC/FCC channel for ethernet */ - -#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1) - -/* - * - Rx-CLK is CLK12 - * - Tx-CLK is CLK11 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK12|CMXFCR_TF1CS_CLK11) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - -#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3) - -/* - * - Rx-CLK is CLK15 - * - Tx-CLK is CLK16 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - -#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */ - - -/* system clock rate (CLKIN) - equal to the 60x and local bus speed */ -#ifndef CONFIG_300MHz -#define CONFIG_8260_CLKIN 66666666 /* in Hz */ -#else -#define CONFIG_8260_CLKIN 83333000 /* in Hz */ -#endif - -#if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC) -#define CONFIG_BAUDRATE 230400 -#else -#define CONFIG_BAUDRATE 115200 -#endif - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_BSP - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -#define CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC /* "bad" address */ - -#define CONFIG_MISC_INIT_R /* have misc_init_r() function */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - - -/* What should the base address of the main FLASH be and how big is - * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/tqm8260/config.mk - * The main FLASH is whichever is connected to *CS0. - */ -#define CONFIG_SYS_FLASH0_BASE 0x40000000 -#define CONFIG_SYS_FLASH1_BASE 0x60000000 -#define CONFIG_SYS_FLASH0_SIZE 32 -#define CONFIG_SYS_FLASH1_SIZE 32 - -/* Flash bank size (for preliminary settings) - */ -#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -#if 0 -/* Start port with environment in flash; switch to EEPROM later */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x40000) -#define CONFIG_ENV_SIZE 0x40000 -#define CONFIG_ENV_SECT_SIZE 0x40000 -#else -/* Final version: environment in EEPROM */ -#define CONFIG_ENV_IS_IN_EEPROM 1 -#define CONFIG_ENV_OFFSET 0 -#define CONFIG_ENV_SIZE 2048 -#endif - -/*----------------------------------------------------------------------- - * Hardware Information Block - */ -#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ -#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */ -#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */ - -/*----------------------------------------------------------------------- - * Hard Reset Configuration Words - * - * if you change bits in the HRCW, you must also change the CONFIG_SYS_* - * defines for the various registers affected by the HRCW e.g. changing - * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR. - */ -#if defined(CONFIG_266MHz) -#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB111 | HRCW_BMS | \ - HRCW_MODCK_H0111) -#elif defined(CONFIG_300MHz) -#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB111 | HRCW_BMS | \ - HRCW_MODCK_H0110) -#else -#define CONFIG_SYS_HRCW_MASTER (HRCW_CIP | HRCW_ISB111 | HRCW_BMS) -#endif - -/* no slaves so just fill with zeros */ -#define CONFIG_SYS_HRCW_SLAVE1 0 -#define CONFIG_SYS_HRCW_SLAVE2 0 -#define CONFIG_SYS_HRCW_SLAVE3 0 -#define CONFIG_SYS_HRCW_SLAVE4 0 -#define CONFIG_SYS_HRCW_SLAVE5 0 -#define CONFIG_SYS_HRCW_SLAVE6 0 -#define CONFIG_SYS_HRCW_SLAVE7 0 - -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - * - * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE, local SDRAM - * is mapped at SDRAM_BASE2_PRELIM. - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/ - -/*----------------------------------------------------------------------- - * Hardware Information Block - */ -#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ -#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */ -#define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * HIDx - Hardware Implementation-dependent Registers 2-11 - *----------------------------------------------------------------------- - * HID0 also contains cache control - initially enable both caches and - * invalidate contents, then the final state leaves only the instruction - * cache enabled. Note that Power-On and Hard reset invalidate the caches, - * but Soft reset does not. - * - * HID1 has only read-only information - nothing to set. - */ -#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\ - HID0_IFEM|HID0_ABE) -#define CONFIG_SYS_HID0_FINAL (HID0_IFEM|HID0_ABE) -#define CONFIG_SYS_HID2 0 - -/*----------------------------------------------------------------------- - * RMR - Reset Mode Register 5-5 - *----------------------------------------------------------------------- - * turn on Checkstop Reset Enable - */ -#define CONFIG_SYS_RMR RMR_CSRE - -/*----------------------------------------------------------------------- - * BCR - Bus Configuration 4-25 - *----------------------------------------------------------------------- - */ -#ifdef CONFIG_BUSMODE_60x -#define CONFIG_SYS_BCR (BCR_EBM|BCR_L2C|BCR_LETM|\ - BCR_NPQM0|BCR_NPQM1|BCR_NPQM2) /* 60x mode */ -#else -#define BCR_APD01 0x10000000 -#define CONFIG_SYS_BCR (BCR_APD01|BCR_ETM|BCR_LETM) /* 8260 mode */ -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 4-31 - *----------------------------------------------------------------------- - */ -#if 0 -#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC10|SIUMCR_APPC10) -#else -#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC00|SIUMCR_APPC10) -#endif - - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 4-35 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP) -#endif /* CONFIG_WATCHDOG */ - -/*----------------------------------------------------------------------- - * TMCNTSC - Time Counter Status and Control 4-40 - *----------------------------------------------------------------------- - * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, - * and enable Time Counter - */ -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 4-42 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable - * Periodic timer - */ -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) - -/*----------------------------------------------------------------------- - * SCCR - System Clock Control 9-8 - *----------------------------------------------------------------------- - * Ensure DFBRG is Divide by 16 - */ -#define CONFIG_SYS_SCCR 0 - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration 13-7 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RCCR 0 - -/* - * Init Memory Controller: - * - * Bank Bus Machine PortSz Device - * ---- --- ------- ------ ------ - * 0 60x GPCM 64 bit FLASH - * 1 60x SDRAM 64 bit SDRAM - * 2 Local SDRAM 32 bit SDRAM - * - */ - - /* Initialize SDRAM on local bus - */ -#define CONFIG_SYS_INIT_LOCAL_SDRAM - -#define SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */ - -/* Minimum mask to separate preliminary - * address ranges for CS[0:2] - */ -#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT (512<<20) /* less than 512 MB */ -#define CONFIG_SYS_LOCAL_SDRAM_LIMIT (128<<20) /* less than 128 MB */ - -#define CONFIG_SYS_MPTPR 0x4000 - -/*----------------------------------------------------------------------------- - * Address for Mode Register Set (MRS) command - *----------------------------------------------------------------------------- - * In fact, the address is rather configuration data presented to the SDRAM on - * its address lines. Because the address lines may be mux'ed externally either - * for 8 column or 9 column devices, some bits appear twice in the 8260's - * address: - * - * | (RFU) | (RFU) | WBL | TM | CL | BT | Burst Length | - * | BA1 BA0 | A12 : A10 | A9 | A8 A7 | A6 : A4 | A3 | A2 : A0 | - * 8 columns mux'ing: | A9 | A10 A21 | A22 : A24 | A25 | A26 : A28 | - * 9 columns mux'ing: | A8 | A20 A21 | A22 : A24 | A25 | A26 : A28 | - * Settings: | 0 | 0 0 | 0 1 0 | 0 | 0 1 0 | - *----------------------------------------------------------------------------- - */ -#define CONFIG_SYS_MRS_OFFS 0x00000110 - - -/* Bank 0 - FLASH - */ -#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK) |\ - BRx_PS_64 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\ - ORxG_CSNT |\ - ORxG_ACS_DIV1 |\ - ORxG_SCY_3_CLK |\ - ORxG_EHTR |\ - ORxG_TRLX) - - /* SDRAM on TQM8260 can have either 8 or 9 columns. - * The number affects configuration values. - */ - -/* Bank 1 - 60x bus SDRAM - */ -#define CONFIG_SYS_PSRT 0x20 -#define CONFIG_SYS_LSRT 0x20 -#ifndef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK) |\ - BRx_PS_64 |\ - BRx_MS_SDRAM_P |\ - BRx_V) - -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR1_8COL - - - /* SDRAM initialization values for 8-column chips - */ -#define CONFIG_SYS_OR1_8COL ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI1_A7 |\ - ORxS_NUMR_12) - -#define CONFIG_SYS_PSDMR_8COL (PSDMR_PBI |\ - PSDMR_SDAM_A15_IS_A5 |\ - PSDMR_BSMA_A12_A14 |\ - PSDMR_SDA10_PBI1_A8 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_2C |\ - PSDMR_EAMUX |\ - PSDMR_CL_2) - - /* SDRAM initialization values for 9-column chips - */ -#define CONFIG_SYS_OR1_9COL ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI1_A5 |\ - ORxS_NUMR_13) - -#define CONFIG_SYS_PSDMR_9COL (PSDMR_PBI |\ - PSDMR_SDAM_A16_IS_A5 |\ - PSDMR_BSMA_A12_A14 |\ - PSDMR_SDA10_PBI1_A7 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_2C |\ - PSDMR_EAMUX |\ - PSDMR_CL_2) - -/* Bank 2 - Local bus SDRAM - */ -#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM -#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BRx_BA_MSK) |\ - BRx_PS_32 |\ - BRx_MS_SDRAM_L |\ - BRx_V) - -#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_OR2_8COL - -#define SDRAM_BASE2_PRELIM 0x80000000 - - /* SDRAM initialization values for 8-column chips - */ -#define CONFIG_SYS_OR2_8COL ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI1_A8 |\ - ORxS_NUMR_12) - -#define CONFIG_SYS_LSDMR_8COL (PSDMR_PBI |\ - PSDMR_SDAM_A15_IS_A5 |\ - PSDMR_BSMA_A13_A15 |\ - PSDMR_SDA10_PBI1_A9 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_BL |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_2C |\ - PSDMR_CL_2) - - /* SDRAM initialization values for 9-column chips - */ -#define CONFIG_SYS_OR2_9COL ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\ - ORxS_BPD_4 |\ - ORxS_ROWST_PBI1_A6 |\ - ORxS_NUMR_13) - -#define CONFIG_SYS_LSDMR_9COL (PSDMR_PBI |\ - PSDMR_SDAM_A16_IS_A5 |\ - PSDMR_BSMA_A13_A15 |\ - PSDMR_SDA10_PBI1_A8 |\ - PSDMR_RFRC_7_CLK |\ - PSDMR_PRETOACT_2W |\ - PSDMR_ACTTORW_2W |\ - PSDMR_BL |\ - PSDMR_LDOTOPRE_1C |\ - PSDMR_WRC_2C |\ - PSDMR_CL_2) - -#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */ - -#endif /* CONFIG_SYS_RAMBOOT */ - -#define CONFIG_SYS_CAN0_BASE 0xc0000000 -#define CONFIG_SYS_CAN1_BASE 0xc0008000 -#define CONFIG_SYS_FIOX_BASE 0xc0010000 -#define CONFIG_SYS_FDOHM_BASE 0xc0018000 -#define CONFIG_SYS_EXTPROM_BASE 0xc2000000 - -#define CONFIG_SYS_CAN_SIZE 0x00000100 -#define CONFIG_SYS_FIOX_SIZE 0x00000020 -#define CONFIG_SYS_FDOHM_SIZE 0x00002000 -#define CONFIG_SYS_EXTPROM_BANK_SIZE 0x01000000 - -#define EXT_EEPROM_MAX_FLASH_BANKS 0x02 - -/* CS3 - CAN 0 - */ -#define CONFIG_SYS_CAN0_BR3 ((CONFIG_SYS_CAN0_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_MS_UPMA |\ - BRx_V) - -#define CONFIG_SYS_CAN0_OR3 (P2SZ_TO_AM(CONFIG_SYS_CAN_SIZE) |\ - ORxU_BI |\ - ORxU_EHTR_4IDLE) - -/* CS4 - CAN 1 - */ -#define CONFIG_SYS_CAN1_BR4 ((CONFIG_SYS_CAN1_BASE & BRx_BA_MSK) |\ - BRx_PS_8 |\ - BRx_MS_UPMA |\ - BRx_V) - -#define CONFIG_SYS_CAN1_OR4 (P2SZ_TO_AM(CONFIG_SYS_CAN_SIZE) |\ - ORxU_BI |\ - ORxU_EHTR_4IDLE) - -/* CS5 - Extended PROM (16MB optional) - */ -#define CONFIG_SYS_EXTPROM_BR5 ((CONFIG_SYS_EXTPROM_BASE & BRx_BA_MSK)|\ - BRx_PS_32 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_EXTPROM_OR5 (P2SZ_TO_AM(CONFIG_SYS_EXTPROM_BANK_SIZE)|\ - ORxG_CSNT |\ - ORxG_ACS_DIV4 |\ - ORxG_SCY_5_CLK |\ - ORxG_TRLX) - -/* CS6 - Extended PROM (16MB optional) - */ -#define CONFIG_SYS_EXTPROM_BR6 (((CONFIG_SYS_EXTPROM_BASE + \ - CONFIG_SYS_EXTPROM_BANK_SIZE) & BRx_BA_MSK)|\ - BRx_PS_32 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_EXTPROM_OR6 (P2SZ_TO_AM(CONFIG_SYS_EXTPROM_BANK_SIZE)|\ - ORxG_CSNT |\ - ORxG_ACS_DIV4 |\ - ORxG_SCY_5_CLK |\ - ORxG_TRLX) - -/* CS7 - FPGA FIOX: Glue Logic - */ -#define CONFIG_SYS_FIOX_BR7 ((CONFIG_SYS_FIOX_BASE & BRx_BA_MSK) |\ - BRx_PS_32 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_FIOX_OR7 (P2SZ_TO_AM(CONFIG_SYS_FIOX_SIZE) |\ - ORxG_ACS_DIV4 |\ - ORxG_SCY_5_CLK |\ - ORxG_TRLX) - -/* CS8 - FPGA DOH Master - */ -#define CONFIG_SYS_FDOHM_BR8 ((CONFIG_SYS_FDOHM_BASE & BRx_BA_MSK) |\ - BRx_PS_16 |\ - BRx_MS_GPCM_P |\ - BRx_V) - -#define CONFIG_SYS_FDOHM_OR8 (P2SZ_TO_AM(CONFIG_SYS_FDOHM_SIZE) |\ - ORxG_ACS_DIV4 |\ - ORxG_SCY_5_CLK |\ - ORxG_TRLX) - - -/* FPGA configuration */ -#define CONFIG_SYS_PD_FIOX_PROG (1 << (31- 5)) /* PD 5 */ -#define CONFIG_SYS_PD_FIOX_DONE (1 << (31-28)) /* PD 28 */ -#define CONFIG_SYS_PD_FIOX_INIT (1 << (31-29)) /* PD 29 */ - -#define CONFIG_SYS_PD_FDOHM_PROG (1 << (31- 4)) /* PD 4 */ -#define CONFIG_SYS_PD_FDOHM_DONE (1 << (31-26)) /* PD 26 */ -#define CONFIG_SYS_PD_FDOHM_INIT (1 << (31-27)) /* PD 27 */ - - -#endif /* __CONFIG_H */ diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h index cffeb11447..72ea217e54 100644 --- a/include/configs/SPD823TS.h +++ b/include/configs/SPD823TS.h @@ -303,6 +303,8 @@ * IDE/ATA stuff *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ +#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */ #define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */ #define CONFIG_IDE_LED 1 /* LED for ide supported */ #define CONFIG_IDE_RESET 1 /* reset for ide supported */ diff --git a/include/configs/SX1.h b/include/configs/SX1.h deleted file mode 100644 index 93d031ca85..0000000000 --- a/include/configs/SX1.h +++ /dev/null @@ -1,189 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_ARM925T 1 /* This is an arm925t CPU */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP1510 1 /* which is in a 1510 (helen) */ -#define CONFIG_OMAP_SX1 1 /* a SX1 Board */ - -/* input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 12000000 /* the SX1 has 12MHz input clock */ - -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -/* - * Hardware drivers - */ - -/* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (CONFIG_SYS_CLK_FREQ) /* can be 12M/32Khz or 48Mhz */ -#define CONFIG_SYS_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */ - -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SX1 */ - -/* - * USB device configuration - */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 - -#define CONFIG_USBD_VENDORID 0x1234 -#define CONFIG_USBD_PRODUCTID 0x5678 -#define CONFIG_USBD_MANUFACTURER "Siemens" -#define CONFIG_USBD_PRODUCT_NAME "SX1" - -/* - * I2C configuration - */ -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP1510_I2C - -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_ENV_OVERWRITE -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_I2C - -#undef CONFIG_CMD_NET - - -#include <configs/omap1510.h> - -#define CONFIG_BOOTARGS "mem=16M console=ttyS0,115200n8 root=/dev/mtdblock3 rw" -#ifdef CONFIG_STDOUT_USBTTY -#define CONFIG_PREBOOT "setenv stdout usbtty;setenv stdin usbtty" -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "SX1# " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */ - -/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. - * This time is further subdivided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE /* use timer 1 */ -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */ - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - * V1 - * PHYS_FLASH_SIZE_1 (16 << 10) 16 MB - * PHYS_FLASH_SIZE_2 (8 << 10) 8 MB - * V2 only 1 flash - * PHYS_FLASH_SIZE_1 (32 << 10) 32 MB - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define PHYS_FLASH_SECT_SIZE (128*1024) /* Size of a sector (128kB) */ -#define CONFIG_SYS_MAX_FLASH_SECT (256) /* max number of sectors on one chip */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE) /* addr of environment */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ -#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, PHYS_FLASH_2 } - -/*----------------------------------------------------------------------- - * FLASH driver setup - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE -#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Total Size of Environment Sector */ -#define CONFIG_ENV_OFFSET ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_SIZE_REDUND 0x20000 -#define CONFIG_ENV_OFFSET_REDUND 0x40000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h new file mode 100644 index 0000000000..76b3ca6898 --- /dev/null +++ b/include/configs/T4240QDS.h @@ -0,0 +1,35 @@ +/* + * Copyright 2011-2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * T4240 QDS board configuration file + */ +#define CONFIG_T4240QDS +#define CONFIG_PHYS_64BIT +#define CONFIG_PPC_T4240 + +#define CONFIG_FSL_SATA_V2 +#define CONFIG_PCIE4 + +#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ + +#include "t4qds.h" diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h index 4176c7fe56..623cb6636b 100644 --- a/include/configs/TK885D.h +++ b/include/configs/TK885D.h @@ -343,6 +343,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h index a01b4a6bef..9fac5d15c7 100644 --- a/include/configs/TQM823L.h +++ b/include/configs/TQM823L.h @@ -335,6 +335,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h index 1da4acd455..932f158b2c 100644 --- a/include/configs/TQM823M.h +++ b/include/configs/TQM823M.h @@ -331,6 +331,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h index 1c054f0bc6..eb08de2814 100644 --- a/include/configs/TQM850L.h +++ b/include/configs/TQM850L.h @@ -320,6 +320,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h index 46066dfb4c..bf3a76ca8c 100644 --- a/include/configs/TQM850M.h +++ b/include/configs/TQM850M.h @@ -322,6 +322,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h index dd2da9410c..43dd64356c 100644 --- a/include/configs/TQM855L.h +++ b/include/configs/TQM855L.h @@ -324,6 +324,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h index 95bc4d964c..e7fd2db28e 100644 --- a/include/configs/TQM855M.h +++ b/include/configs/TQM855M.h @@ -359,6 +359,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 487666ce55..81e1b91ee7 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -323,6 +323,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h index e8b77ea71a..ed496a1825 100644 --- a/include/configs/TQM860M.h +++ b/include/configs/TQM860M.h @@ -324,6 +324,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h index 334b7ecc17..1559336ec1 100644 --- a/include/configs/TQM862L.h +++ b/include/configs/TQM862L.h @@ -327,6 +327,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h index 1e2ad40d91..61dcf627d7 100644 --- a/include/configs/TQM862M.h +++ b/include/configs/TQM862M.h @@ -328,6 +328,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h index a13c16aa5a..7d0ae99cb1 100644 --- a/include/configs/TQM866M.h +++ b/include/configs/TQM866M.h @@ -356,6 +356,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h index 7df76fbf02..7941631b51 100644 --- a/include/configs/TQM885D.h +++ b/include/configs/TQM885D.h @@ -341,6 +341,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 06adc947b0..fb7d922257 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -124,6 +124,7 @@ /* USB support (currently only works with D-cache off) */ #define CONFIG_USB_OHCI +#define CONFIG_USB_OHCI_S3C24XX #define CONFIG_USB_KEYBOARD #define CONFIG_USB_STORAGE #define CONFIG_DOS_PARTITION diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 339d4bdb63..b6e48f8a63 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -29,6 +29,7 @@ #define CONFIG_SYS_LONGHELP /* undef to save memory */ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "U-Boot# " +#define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_NO_FLASH #define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */ #define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM @@ -46,11 +47,14 @@ /* set to negative value for no autoboot */ #define CONFIG_BOOTDELAY 1 +#define CONFIG_ENV_VARS_UBOOT_CONFIG +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ "fdtaddr=0x80F80000\0" \ "rdaddr=0x81000000\0" \ "bootfile=/boot/uImage\0" \ + "fdtfile=\0" \ "console=ttyO0,115200n8\0" \ "optargs=\0" \ "mmcdev=0\0" \ @@ -79,9 +83,16 @@ "ramboot=echo Booting from ramdisk ...; " \ "run ramargs; " \ "bootm ${loadaddr}\0" \ + "findfdt="\ + "if test $board_name = A335BONE; then " \ + "setenv fdtfile am335x-bone.dtb; fi; " \ + "if test $board_name = A33515BB; then " \ + "setenv fdtfile am335x-evm.dtb; fi; " \ + "if test $board_name = A335X_SK; then " \ + "setenv fdtfile am335x-evmsk.dtb; fi\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "echo SD/MMC found on device ${mmcdev};" \ "if run loadbootenv; then " \ "echo Loaded environment from ${bootenv};" \ @@ -158,9 +169,15 @@ /* NS16550 Configuration */ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SERIAL_MULTI #define CONFIG_SYS_NS16550_REG_SIZE (-4) #define CONFIG_SYS_NS16550_CLK (48000000) #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ +#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ +#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ +#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ +#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ +#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ /* I2C Configuration */ #define CONFIG_I2C @@ -182,11 +199,7 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \ 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 } -/* - * select serial console configuration - */ -#define CONFIG_SERIAL1 1 -#define CONFIG_CONS_INDEX 1 +#define CONFIG_ENV_OVERWRITE 1 #define CONFIG_SYS_CONSOLE_INFO_QUIET #define CONFIG_ENV_IS_NOWHERE @@ -218,6 +231,13 @@ #define CONFIG_SPL_NET_SUPPORT #define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" #define CONFIG_SPL_ETH_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SPL_SPI_BUS 0 +#define CONFIG_SPL_SPI_CS 0 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" /* diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h index 8ddeff46f4..20a3df5db2 100644 --- a/include/configs/am3517_crane.h +++ b/include/configs/am3517_crane.h @@ -209,7 +209,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h index 698081100e..ce71d1335c 100644 --- a/include/configs/am3517_evm.h +++ b/include/configs/am3517_evm.h @@ -206,7 +206,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h index af0b714e11..6764b4749c 100644 --- a/include/configs/apx4devkit.h +++ b/include/configs/apx4devkit.h @@ -132,7 +132,7 @@ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_MMC_BOUNCE_BUFFER +#define CONFIG_BOUNCE_BUFFER #define CONFIG_MXS_MMC #endif diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index cbdc3e93cb..71f765b494 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -89,6 +89,7 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_NAND #define CONFIG_CMD_SF +#define CONFIG_CMD_MMC /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 @@ -138,6 +139,15 @@ #define CONFIG_CMD_UBIFS #endif +/* MMC */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_CMD_FAT +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#define CONFIG_DOS_PARTITION +#endif + /* Ethernet */ #define CONFIG_MACB #define CONFIG_RMII diff --git a/include/configs/atc.h b/include/configs/atc.h index 75f950b94c..538a167528 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -482,6 +482,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 5e3155dffc..6bd1397dcd 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -130,7 +130,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_ATMEL_MCI #define CONFIG_GENERIC_MMC -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1 #define CONFIG_ATMEL_SPI #define CONFIG_SPI_FLASH diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h index f85374f882..998cb97a55 100644 --- a/include/configs/atngw100mkii.h +++ b/include/configs/atngw100mkii.h @@ -154,7 +154,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_ATMEL_MCI #define CONFIG_GENERIC_MMC -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1 #define CONFIG_ATMEL_SPI #define CONFIG_SPI_FLASH diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index bb426f1edb..c6b129aff9 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -153,7 +153,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_ATMEL_MCI #define CONFIG_GENERIC_MMC -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1 #define CONFIG_SYS_DCACHE_LINESZ 32 #define CONFIG_SYS_ICACHE_LINESZ 32 diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h index 817d94373e..67ff39bfd9 100644 --- a/include/configs/atstk1003.h +++ b/include/configs/atstk1003.h @@ -137,7 +137,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_ATMEL_MCI #define CONFIG_GENERIC_MMC -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1 #define CONFIG_SYS_DCACHE_LINESZ 32 #define CONFIG_SYS_ICACHE_LINESZ 32 diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h index 5134b7ffa5..a1d593b5cf 100644 --- a/include/configs/atstk1004.h +++ b/include/configs/atstk1004.h @@ -137,7 +137,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_ATMEL_MCI #define CONFIG_GENERIC_MMC -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1 #define CONFIG_SYS_DCACHE_LINESZ 32 #define CONFIG_SYS_ICACHE_LINESZ 32 diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index 29fdd126a7..280ecbccc8 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -153,7 +153,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_ATMEL_MCI #define CONFIG_GENERIC_MMC -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1 #define CONFIG_SYS_DCACHE_LINESZ 32 #define CONFIG_SYS_ICACHE_LINESZ 32 diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h deleted file mode 100644 index 566c42b6be..0000000000 --- a/include/configs/c2mon.h +++ /dev/null @@ -1,416 +0,0 @@ -/* - * (C) Copyright 2001-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC855 1 /* This is a MPC855 CPU */ -#define CONFIG_C2MON 1 /* ...on a C2MON module */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#define CONFIG_80MHz 1 /* Running at 5 * 16 = 80 MHz */ - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -#undef CONFIG_STATUS_LED /* Status LED disabled */ - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -#define CONFIG_FEC_ENET 1 /* Use Fast Ethernet Controller */ - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_IDE -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ - -#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#if defined(DEBUG) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#ifndef CONFIG_CAN_DRIVER -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) -#else /* we must activate GPL5 in the SIUMCR for CAN */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01) -#endif /* CONFIG_CAN_DRIVER */ - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! - */ -#ifdef CONFIG_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */ -#define CONFIG_SYS_PLPRCR \ - ( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST ) -#else /* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) -#endif /* CONFIG_80MHz */ - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -#ifdef CONFIG_80MHz /* for 80 MHz, we use a 16 MHz clock * 5 */ -#define CONFIG_SYS_SCCR (/* SCCR_TBS | */ \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) -#else /* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_SCCR (SCCR_TBS | \ - SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ - SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ - SCCR_DFALCD00) -#endif /* CONFIG_80MHz */ - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * PCMCIA Power Switch - * - * The C2MON uses a TPS2211A PC-Card Power-Interface Switch to - * control the voltages on the PCMCIA slot which is connected - * to Port C (all outputs) and Port B (Over-Current Input) - *----------------------------------------------------------------------- - */ - /* Output pins */ -#define TPS2211_VCCD0 0x0002 /* PC.14 */ -#define TPS2211_VCCD1 0x0004 /* PC.13 */ -#define TPS2211_VPPD0 0x0008 /* PC.12 */ -#define TPS2211_VPPD1 0x0010 /* PC.11 */ -#define TPS2211_OUTPUTS ( TPS2211_VCCD0 | TPS2211_VCCD1 | \ - TPS2211_VPPD0 | TPS2211_VPPD1 ) - - /* Input pins */ -#define TPS2211_OC 0x00000200 /* PB.22: Over-Current */ -#define TPS2211_INPUTS ( TPS2211_OC ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \ - OR_SCY_5_CLK | OR_EHTR) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) - -#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM -#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V ) - -/* - * BR2/3 and OR2/3 (SDRAM) - * - */ -#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */ -#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 - -#define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -#ifndef CONFIG_CAN_DRIVER -#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) -#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */ -#define CONFIG_SYS_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */ -#define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */ -#define CONFIG_SYS_OR3_CAN (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI) -#define CONFIG_SYS_BR3_CAN ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \ - BR_PS_8 | BR_MS_UPMB | BR_V ) -#endif /* CONFIG_CAN_DRIVER */ - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 97 /* start with divider for 100 MHz */ - -/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MAMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) -/* 9 column SDRAM */ -#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ - MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) - -#endif /* __CONFIG_H */ diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h index 312fd947be..a7cd1d45ad 100644 --- a/include/configs/ca9x4_ct_vxp.h +++ b/include/configs/ca9x4_ct_vxp.h @@ -163,6 +163,8 @@ /* Room required on the stack for the environment data */ #define CONFIG_ENV_SIZE FLASH_MAX_SECTOR_SIZE +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */ + /* * Amount of flash used for environment: * We don't know which end has the small erase blocks so we use the penultimate diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 46c556ddc8..568ae8e097 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -231,7 +231,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ @@ -289,25 +289,15 @@ */ /* **** PISMO SUPPORT *** */ - /* Configure the PISMO */ #define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - -#if defined(CONFIG_CMD_NAND) -#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE -#endif /* Monitor at start of flash */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ #define CONFIG_ENV_IS_IN_NAND -#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */ #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */ - #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h new file mode 100644 index 0000000000..0e5f281b25 --- /dev/null +++ b/include/configs/colibri_t20_iris.h @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2012 Lucas Stach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "tegra20-common.h" + +/* Enable FDT support */ +#define CONFIG_DEFAULT_DEVICE_TREE tegra20-colibri_t20_iris +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE + +/* High-level configuration options */ +#define V_PROMPT "Tegra20 (Colibri) # " +#define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T20 on Iris" + +/* Board-specific serial config */ +#define CONFIG_TEGRA_ENABLE_UARTA +#define CONFIG_TEGRA_UARTA_SDIO1 +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE + +#define CONFIG_BOARD_EARLY_INIT_F + +/* SD/MMC support */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_TEGRA_MMC +#define CONFIG_CMD_MMC + +/* File system support */ +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT + +/* USB host support */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_ULPI +#define CONFIG_USB_ULPI_VIEWPORT +#define CONFIG_USB_STORAGE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 +#define CONFIG_CMD_USB + +/* USB networking support */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING + +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (SZ_2M) +#undef CONFIG_ENV_SIZE /* undef size from tegra20-common.h */ +#define CONFIG_ENV_SIZE (SZ_64K) + +/* Debug commands */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CACHE + +#include "tegra-common-post.h" + +#endif /* __CONFIG_H */ diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index 0e89242db7..cc95e2be98 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -45,6 +45,28 @@ #undef CONFIG_WATCHDOG #undef CONFIG_HW_WATCHDOG +/* SATA AHCI storage */ + +#define CONFIG_SCSI_AHCI + +#ifdef CONFIG_SCSI_AHCI +#define CONFIG_SYS_64BIT_LBA +#define CONFIG_SATA_INTEL 1 +#define CONFIG_SCSI_DEV_LIST {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_NM10_AHCI}, \ + {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_MOBILE}, \ + {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_SERIES6}, \ + {PCI_VENDOR_ID_INTEL, \ + PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE} + +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#endif + /*----------------------------------------------------------------------- * Real Time Clock Configuration */ @@ -92,6 +114,9 @@ #define CONFIG_MAC_PARTITION #define CONFIG_ISO_PARTITION /* Experimental */ +#define CONFIG_CMD_CBFS +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE /*----------------------------------------------------------------------- * Video Configuration diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 8489d16dda..c41b039996 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -76,10 +76,6 @@ #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ -#define CONFIG_SYS_SRIO -#define CONFIG_SRIO1 /* SRIO port 1 */ -#define CONFIG_SRIO2 /* SRIO port 2 */ - #define CONFIG_FSL_LAW /* Use common FSL init code */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index 1e658067e0..da3263f4f5 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -233,7 +233,7 @@ "dhcp ${loadaddr}; " \ "run netargs; " \ "bootm ${loadaddr}\0" \ - "autoboot=if mmc rescan ${mmcdev}; then " \ + "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h index 9371ec31f3..3be4929fc2 100644 --- a/include/configs/eb_cpux9k2.h +++ b/include/configs/eb_cpux9k2.h @@ -43,6 +43,10 @@ #define MACH_TYPE_EB_CPUX9K2 1977 #define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2 + +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_DCACHE_OFF + /*--------------------------------------------------------------------------*/ #ifndef CONFIG_RAMBOOT #define CONFIG_SYS_TEXT_BASE 0x00000000 @@ -56,7 +60,6 @@ #define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1 #define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */ - #define CONFIG_BOOT_RETRY_TIME 30 #define CONFIG_CMDLINE_EDITING diff --git a/include/configs/eco5pk.h b/include/configs/eco5pk.h new file mode 100644 index 0000000000..b9ebf6a2a8 --- /dev/null +++ b/include/configs/eco5pk.h @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2012 8D Technologies inc. + * Based on mt_ventoux.h, original banner below: + * + * Copyright (C) 2011 + * Stefano Babic, DENX Software Engineering, sbabic@denx.de. + * + * Copyright (C) 2009 TechNexion Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "tam3517-common.h" + +#undef CONFIG_USB_EHCI +#undef CONFIG_USB_EHCI_OMAP +#undef CONFIG_USB_OMAP3 +#undef CONFIG_CMD_USB + +/* Our console port is port3 */ +#undef CONFIG_CONS_INDEX +#undef CONFIG_SYS_NS16550_COM1 +#undef CONFIG_SERIAL1 + +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 + +#define MACH_TYPE_ECO5_PK 4017 +#define CONFIG_MACH_TYPE MACH_TYPE_ECO5_PK + +#define CONFIG_BOOTDELAY 10 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_AUTO_COMPLETE + +/* + * Miscellaneous configurable options + */ +#define V_PROMPT "ECO5-PK # " +#define CONFIG_SYS_PROMPT V_PROMPT + +/* + * Set its own mtdparts, different from common + */ +#undef MTDIDS_DEFAULT +#undef MTDPARTS_DEFAULT +#define MTDIDS_DEFAULT "nand0=omap2-nand.0" +#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(xloader-nand)," \ + "1024k(uboot-nand),256k(params-nand)," \ + "5120k(kernel),-(ubifs)" + +/* + * The arithmetic in tam3517.h is wrong for us and the kernel gets overwritten. + */ +#undef CONFIG_ENV_OFFSET_REDUND +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \ + CONFIG_SYS_ENV_SECT_SIZE) + +#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_TAM3517_SETTINGS \ + "install_kernel=if dhcp $bootfile; then nand erase kernel;" \ + "nand write $fileaddr kernel; fi\0" \ + "mtdparts="MTDPARTS_DEFAULT"\0" \ + "serverip=192.168.142.60\0" + + +#endif /* __CONFIG_H */ diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h index 71d2473a90..1c8da9f91a 100644 --- a/include/configs/favr-32-ezkit.h +++ b/include/configs/favr-32-ezkit.h @@ -152,7 +152,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_ATMEL_MCI #define CONFIG_GENERIC_MMC -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1 #define CONFIG_SYS_DCACHE_LINESZ 32 #define CONFIG_SYS_ICACHE_LINESZ 32 diff --git a/include/configs/h2200.h b/include/configs/h2200.h new file mode 100644 index 0000000000..ef14dd38c5 --- /dev/null +++ b/include/configs/h2200.h @@ -0,0 +1,157 @@ +/* + * iPAQ h2200 board configuration + * + * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define MACH_TYPE_H2200 341 +#define CONFIG_MACH_TYPE MACH_TYPE_H2200 + +#define CONFIG_CPU_PXA25X 1 +#define CONFIG_BOARD_H2200 + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE + +#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800 + +#define CONFIG_ENV_SIZE 0x00040000 +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) + +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */ + +/* + * iPAQ 1st stage bootloader loads 2nd stage bootloader + * at address 0xa0040000 but bootloader requires header + * which is 0x1000 long. + * + * --- Header begin --- + * .word 0xea0003fe ; b 0x1000 + * + * .org 0x40 + * .ascii "ECEC" + * + * .org 0x1000 + * --- Header end --- + */ + +#define CONFIG_SYS_TEXT_BASE 0xa0041000 + +/* + * Static chips + */ + +#define CONFIG_SYS_MSC0_VAL 0x246c7ffc +#define CONFIG_SYS_MSC1_VAL 0x7ff07ff0 +#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0 + +/* + * PCMCIA and CF Interfaces + */ + +#define CONFIG_SYS_MECR_VAL 0x00000000 +#define CONFIG_SYS_MCMEM0_VAL 0x00000000 +#define CONFIG_SYS_MCMEM1_VAL 0x00000000 +#define CONFIG_SYS_MCATT0_VAL 0x00000000 +#define CONFIG_SYS_MCATT1_VAL 0x00000000 +#define CONFIG_SYS_MCIO0_VAL 0x00000000 +#define CONFIG_SYS_MCIO1_VAL 0x00000000 + +#define CONFIG_SYS_FLYCNFG_VAL 0x00000000 +#define CONFIG_SYS_SXCNFG_VAL 0x00040004 + +#define CONFIG_SYS_MDREFR_VAL 0x0099E018 +#define CONFIG_SYS_MDCNFG_VAL 0x01C801CB +#define CONFIG_SYS_MDMRS_VAL 0x00220022 + +#define CONFIG_SYS_PSSR_VAL 0x00000000 +#define CONFIG_SYS_CKEN 0x00004840 +#define CONFIG_SYS_CCCR 0x00000161 + +/* + * GPIOs + */ + +#define CONFIG_SYS_GPSR0_VAL 0x01000000 +#define CONFIG_SYS_GPSR1_VAL 0x00000000 +#define CONFIG_SYS_GPSR2_VAL 0x00010000 + +#define CONFIG_SYS_GPCR0_VAL 0x00000000 +#define CONFIG_SYS_GPCR1_VAL 0x00000000 +#define CONFIG_SYS_GPCR2_VAL 0x00000000 + +#define CONFIG_SYS_GPDR0_VAL 0xF7E38C00 +#define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83 +#define CONFIG_SYS_GPDR2_VAL 0x000157FF + +#define CONFIG_SYS_GAFR0_L_VAL 0x80401000 +#define CONFIG_SYS_GAFR0_U_VAL 0x00000112 +#define CONFIG_SYS_GAFR1_L_VAL 0x600A9550 +#define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA +#define CONFIG_SYS_GAFR2_L_VAL 0x20000000 +#define CONFIG_SYS_GAFR2_U_VAL 0x00000000 + +/* + * Serial port + */ + +#define CONFIG_PXA_SERIAL +#define CONFIG_FFUART +#define CONFIG_CONS_INDEX 3 + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 } + +#define CONFIG_CMD_IMPORTENV 1 +#define CONFIG_CMD_LOADB +#define CONFIG_CMD_SOURCE +#define CONFIG_CMD_RUN +#define CONFIG_CMD_IMI + +#define CONFIG_FIT +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG + +/* Monitor Command Prompt */ +#define CONFIG_SYS_PROMPT "> " +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "$ " + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +#define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8" + +#endif /* __CONFIG_H */ diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h index 532feb2f6c..5570bdb468 100644 --- a/include/configs/hammerhead.h +++ b/include/configs/hammerhead.h @@ -126,7 +126,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_ATMEL_MCI #define CONFIG_GENERIC_MMC -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1 #define CONFIG_SYS_DCACHE_LINESZ 32 #define CONFIG_SYS_ICACHE_LINESZ 32 diff --git a/include/configs/harmony.h b/include/configs/harmony.h index d582ae1ab6..040bfe48eb 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -72,8 +72,11 @@ #define CONFIG_ENV_OFFSET (SZ_512M - SZ_128K) /* 128K sector size */ /* USB Host support */ +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_ULPI +#define CONFIG_USB_ULPI_VIEWPORT #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index b1071e892c..c81ab7622e 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -180,7 +180,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "echo SD/MMC found on device ${mmcdev};" \ "if run loadbootenv; then " \ "run importbootenv;" \ diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h new file mode 100644 index 0000000000..b36e892cbe --- /dev/null +++ b/include/configs/km/km8309-common.h @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2012 Keymile AG + * Gerlando Falauto <gerlando.falauto@keymile.com> + * + * Based on km8321-common.h, see respective copyright notice for credits + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __CONFIG_KM8309_COMMON_H +#define __CONFIG_KM8309_COMMON_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_QE 1 /* Has QE */ +#define CONFIG_MPC83xx 1 /* MPC83xx family */ +#define CONFIG_MPC830x 1 /* MPC830x family */ +#define CONFIG_MPC8309 1 /* MPC8309 CPU specific */ + +#define CONFIG_KM_DEF_ARCH "arch=ppc_8xx\0" +#define CONFIG_CMD_DIAG 1 + +/* include common defines/options for all 83xx Keymile boards */ +#include "km83xx-common.h" + +/* QE microcode/firmware address */ +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +/* at end of uboot partition, before env */ +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xF00B0000 + +#define CONFIG_MISC_INIT_R + +/* + * System IO Config + */ +/* 0x14000180 SICR_1 */ +#define CONFIG_SYS_SICRL (0 \ + | SICR_1_UART1_UART1RTS \ + | SICR_1_I2C_CKSTOP \ + | SICR_1_IRQ_A_IRQ \ + | SICR_1_IRQ_B_IRQ \ + | SICR_1_GPIO_A_GPIO \ + | SICR_1_GPIO_B_GPIO \ + | SICR_1_GPIO_C_GPIO \ + | SICR_1_GPIO_D_GPIO \ + | SICR_1_GPIO_E_GPIO \ + | SICR_1_GPIO_F_GPIO \ + | SICR_1_USB_A_UART2S \ + | SICR_1_USB_B_UART2RTS \ + | SICR_1_FEC1_FEC1 \ + | SICR_1_FEC2_FEC2 \ + ) + +/* 0x00080400 SICR_2 */ +#define CONFIG_SYS_SICRH (0 \ + | SICR_2_FEC3_FEC3 \ + | SICR_2_HDLC1_A_HDLC1 \ + | SICR_2_ELBC_A_LA \ + | SICR_2_ELBC_B_LCLK \ + | SICR_2_HDLC2_A_HDLC2 \ + | SICR_2_USB_D_GPIO \ + | SICR_2_PCI_PCI \ + | SICR_2_HDLC1_B_HDLC1 \ + | SICR_2_HDLC1_C_HDLC1 \ + | SICR_2_HDLC2_B_GPIO \ + | SICR_2_HDLC2_C_HDLC2 \ + | SICR_2_QUIESCE_B \ + ) + +/* GPR_1 */ +#define CONFIG_SYS_GPR1 0x50008060 + +#define CONFIG_SYS_GP1DIR 0x00000000 +#define CONFIG_SYS_GP1ODR 0x00000000 +#define CONFIG_SYS_GP2DIR 0xFF000000 +#define CONFIG_SYS_GP2ODR 0x00000000 + +/* + * Hardware Reset Configuration Word + */ +#define CONFIG_SYS_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \ + HRCWL_DDR_TO_SCB_CLK_2X1 | \ + HRCWL_CSB_TO_CLKIN_2X1 | \ + HRCWL_CORE_TO_CSB_2X1 | \ + HRCWL_CE_PLL_VCO_DIV_2 | \ + HRCWL_CE_TO_PLL_1X3) + +#define CONFIG_SYS_HRCW_HIGH (\ + HRCWH_PCI_AGENT | \ + HRCWH_PCI_ARBITER_DISABLE | \ + HRCWH_CORE_ENABLE | \ + HRCWH_FROM_0X00000100 | \ + HRCWH_BOOTSEQ_DISABLE | \ + HRCWH_SW_WATCHDOG_DISABLE | \ + HRCWH_ROM_LOC_LOCAL_16BIT | \ + HRCWH_BIG_ENDIAN | \ + HRCWH_LALE_NORMAL) + +#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f +#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ + SDRAM_CFG_32_BE | \ + SDRAM_CFG_SREN | \ + SDRAM_CFG_HSE) + +#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 +#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) +#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ + (0x200 << SDRAM_INTERVAL_REFINT_SHIFT)) + +#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ + CSCONFIG_ODT_RD_NEVER | \ + CSCONFIG_ODT_WR_ONLY_CURRENT | \ + CSCONFIG_ROW_BIT_13 | \ + CSCONFIG_COL_BIT_10) + +#define CONFIG_SYS_DDR_MODE 0x47860242 +#define CONFIG_SYS_DDR_MODE2 0x8080c000 + +#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ + (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ + (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ + (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ + (0 << TIMING_CFG0_WWT_SHIFT) | \ + (0 << TIMING_CFG0_RRT_SHIFT) | \ + (0 << TIMING_CFG0_WRT_SHIFT) | \ + (0 << TIMING_CFG0_RWT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_40) | \ + (2 << TIMING_CFG1_WRTORD_SHIFT) | \ + (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ + (3 << TIMING_CFG1_WRREC_SHIFT) | \ + (7 << TIMING_CFG1_REFREC_SHIFT) | \ + (3 << TIMING_CFG1_ACTTORW_SHIFT) | \ + (7 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ + (3 << TIMING_CFG1_PRETOACT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ + (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ + (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ + (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ + (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ + (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \ + (5 << TIMING_CFG2_CPO_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_3 0x00000000 + +#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 +#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 + +/* EEprom support */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * Local Bus Configuration & Clock Setup + */ +#define CONFIG_SYS_LCRR_DBYP 0x80000000 +#define CONFIG_SYS_LCRR_EADC 0x00010000 +#define CONFIG_SYS_LCRR_CLKDIV 0x00000002 + +#define CONFIG_SYS_LBC_LBCR 0x00000000 + +/* + * MMU Setup + */ +#define CONFIG_SYS_IBAT7L (0) +#define CONFIG_SYS_IBAT7U (0) +#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U + +#endif /* __CONFIG_KM8309_COMMON_H */ diff --git a/include/configs/km/km8321-common.h b/include/configs/km/km8321-common.h index 580b72f4e7..8ad6fc3a33 100644 --- a/include/configs/km/km8321-common.h +++ b/include/configs/km/km8321-common.h @@ -115,7 +115,7 @@ #define CONFIG_SYS_DDR_TIMING_3 0x00000000 #define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 -#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 +#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 /* EEprom support */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h index 877d8418c0..a9823d6ef9 100644 --- a/include/configs/km/km83xx-common.h +++ b/include/configs/km/km83xx-common.h @@ -169,9 +169,15 @@ #define UEC_VERBOSE_DEBUG 1 #ifdef CONFIG_UEC_ETH1 +#if defined(CONFIG_MPC8309) +#define CONFIG_SYS_UEC1_UCC_NUM 2 /* UCC3 */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12 +#else #define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */ #define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ #define CONFIG_SYS_UEC1_TX_CLK QE_CLK17 +#endif #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 0 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index 3a882e396b..4898fb60f4 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -154,16 +154,20 @@ /* I2C */ #define CONFIG_CMD_I2C #define CONFIG_SH_I2C 1 +#define CONFIG_SH_I2C_8BIT #define CONFIG_HARD_I2C #define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_MAX_I2C_BUS (2) +#define CONFIG_SYS_MAX_I2C_BUS (5) #define CONFIG_SYS_I2C_MODULE #define CONFIG_SYS_I2C_SPEED (100000) /* 100 kHz */ #define CONFIG_SYS_I2C_SLAVE (0x7F) #define CONFIG_SH_I2C_DATA_HIGH (4) #define CONFIG_SH_I2C_DATA_LOW (5) -#define CONFIG_SH_I2C_CLOCK (41666666) +#define CONFIG_SH_I2C_CLOCK (104000000) /* 104 MHz */ #define CONFIG_SH_I2C_BASE0 (0xE6820000) #define CONFIG_SH_I2C_BASE1 (0xE6822000) +#define CONFIG_SH_I2C_BASE2 (0xE6824000) +#define CONFIG_SH_I2C_BASE3 (0xE6826000) +#define CONFIG_SH_I2C_BASE4 (0xE6828000) #endif /* __KZM9G_H */ diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h index ed64960879..5886a155dc 100644 --- a/include/configs/lubbock.h +++ b/include/configs/lubbock.h @@ -130,7 +130,8 @@ #define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ #ifdef CONFIG_MMC -#define CONFIG_PXA_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_PXA_MMC_GENERIC #define CONFIG_CMD_MMC #define CONFIG_SYS_MMC_BASE 0xF0000000 #endif diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index ab86053039..df4978161e 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -494,6 +494,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index bdbb82065e..b49ec8c7dd 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -135,7 +135,7 @@ */ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC -#define CONFIG_MMC_BOUNCE_BUFFER +#define CONFIG_BOUNCE_BUFFER #define CONFIG_GENERIC_MMC #define CONFIG_MXS_MMC #endif diff --git a/include/configs/mcx.h b/include/configs/mcx.h index 359522a649..bf49cc1381 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -115,8 +115,7 @@ #define CONFIG_USB_ULPI #define CONFIG_USB_ULPI_VIEWPORT_OMAP /*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */ -#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 154 -#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 152 +#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 57 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 /* commands to include */ @@ -182,7 +181,7 @@ #define CONFIG_JFFS2_PART_SIZE 0xf980000 /* sz of jffs2 part */ /* Environment information */ -#define CONFIG_BOOTDELAY 10 +#define CONFIG_BOOTDELAY 3 #define CONFIG_BOOTFILE "uImage" @@ -256,22 +255,28 @@ "run nandargs; " \ "ubi part nand0,4;" \ "ubi readvol ${loadaddr} kernel;" \ - "run addip addtty addmtd addfb addeth addmisc;" \ + "run addtty addmtd addfb addeth addmisc;" \ "bootm ${loadaddr}\0" \ - "swupdate_args=setenv bootargs ubi.mtd=6 root=ubi0:fs_recovery "\ - "rootfstype=ubifs quiet loglevel=1 " \ - "consoleblank=0 ${swupdate_misc}\0" \ + "preboot=ubi part nand0,7;" \ + "ubi readvol ${loadaddr} splash;" \ + "bmp display ${loadaddr};" \ + "gpio set 55\0" \ + "swupdate_args=setenv bootargs root=/dev/ram " \ + "quiet loglevel=1 " \ + "consoleblank=0 ${swupdate_misc}\0" \ "swupdate=echo Running Sw-Update...;" \ "if printenv mtdparts;then echo Starting SwUpdate...; " \ "else mtdparts default;fi; " \ "ubi part nand0,5;" \ "ubi readvol 0x82000000 kernel_recovery;" \ + "ubi part nand0,6;" \ + "ubi readvol 0x84000000 fs_recovery;" \ "run swupdate_args; " \ "setenv bootargs ${bootargs} " \ "${mtdparts} " \ "vram=6M omapfb.vram=1:2M,2:2M,3:2M " \ "omapdss.def_disp=lcd;" \ - "bootm ${loadaddr}\0" + "bootm 0x82000000 0x84000000\0" #define CONFIG_BOOTCOMMAND \ "run nandboot" @@ -302,6 +307,7 @@ #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ /* address */ +#define CONFIG_PREBOOT /* * AM3517 has 12 GP timers, they can be driven by the system clock @@ -421,4 +427,13 @@ #define CONFIG_NET_RETRY_COUNT 10 #endif +#define CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SPLASH_SCREEN +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_CMD_BMP +#define CONFIG_VIDEO_OMAP3 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + #endif /* __CONFIG_H */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 721cd906ad..eed38c165f 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -287,6 +287,10 @@ # undef CONFIG_DCACHE #endif +#ifndef XILINX_DCACHE_BYTE_SIZE +#define XILINX_DCACHE_BYTE_SIZE 32768 +#endif + /* * BOOTP options */ diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h index d5797cb2e6..8031a05fc8 100644 --- a/include/configs/mimc200.h +++ b/include/configs/mimc200.h @@ -131,7 +131,6 @@ #define CONFIG_MMC #define CONFIG_GENERIC_ATMEL_MCI #define CONFIG_GENERIC_MMC -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1 #if defined(CONFIG_LCD) #define CONFIG_CMD_BMP diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h index 035a1b6798..aa681f0628 100644 --- a/include/configs/mpc8308_p1m.h +++ b/include/configs/mpc8308_p1m.h @@ -30,6 +30,7 @@ */ #define CONFIG_E300 1 /* E300 family */ #define CONFIG_MPC83xx 1 /* MPC83xx family */ +#define CONFIG_MPC830x 1 /* MPC830x family */ #define CONFIG_MPC8308 1 /* MPC8308 CPU specific */ #define CONFIG_MPC8308_P1M 1 /* mpc8308_p1m board specific */ diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 7cdbec68de..2916c710e4 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -142,7 +142,7 @@ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC #define CONFIG_GENERIC_MMC -#define CONFIG_MMC_BOUNCE_BUFFER +#define CONFIG_BOUNCE_BUFFER #define CONFIG_MXS_MMC #endif @@ -313,7 +313,7 @@ "dhcp ${uimage}; bootm\0" #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 8cf59fe875..89feaed7dd 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -181,7 +181,7 @@ "dhcp ${uimage}; bootm\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index fea93b4dc0..62cb42bc4c 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -119,7 +119,7 @@ "dhcp ${uimage}; bootm\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 0955fda1bc..c472075c9a 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -132,7 +132,7 @@ "dhcp ${uimage}; bootm\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index f2384f30bc..a62ea78599 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -141,7 +141,7 @@ "dhcp ${uimage}; bootm\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index ff2a290d7a..9e8331970c 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -118,7 +118,7 @@ "dhcp ${uimage}; bootm\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index b425fedcf9..23562a8776 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -107,7 +107,7 @@ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev};" \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 5989eb21d9..b56d7ca8ca 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -178,7 +178,7 @@ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev};" \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h new file mode 100644 index 0000000000..8506604a76 --- /dev/null +++ b/include/configs/nokia_rx51.h @@ -0,0 +1,452 @@ +/* + * (C) Copyright 2011-2012 + * Pali Rohár <pali.rohar@gmail.com> + * + * (C) Copyright 2010 + * Alistair Buxton <a.j.buxton@gmail.com> + * + * Derived from Beagle Board code: + * (C) Copyright 2006-2008 + * Texas Instruments. + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * Configuration settings for the Nokia RX-51 aka N900. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ + +#define CONFIG_OMAP /* in a TI OMAP core */ +#define CONFIG_OMAP34XX /* which is a 34XX */ +#define CONFIG_OMAP3430 /* which is in a 3430 */ +#define CONFIG_OMAP3_RX51 /* working with RX51 */ +#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */ + +#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51 + +/* + * Nokia X-Loader loading secondary image to address 0x80400000 + * NOLO loading boot image to random place, so it doesn't really + * matter what we set this to. We have to copy u-boot to this address + */ +#define CONFIG_SYS_TEXT_BASE 0x80008000 + +#define CONFIG_SDRC /* The chip has SDRC controller */ + +#include <asm/arch/cpu.h> /* get chip and board defs */ +#include <asm/arch/omap3.h> +#include <asm/arch/mem.h> +#include <linux/stringify.h> + +/* + * Display CPU and Board information + */ +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Clock Defines */ +#define V_OSCK 26000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK >> 1) + +#undef CONFIG_USE_IRQ /* no support for IRQs */ +#define CONFIG_MISC_INIT_R +#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */ + +#define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */ +#define CONFIG_INITRD_TAG /* enable passing initrd */ +#define CONFIG_REVISION_TAG /* enable passing revision tag*/ +#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ + +/* + * Size of malloc() pool + */ +#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_UBI_SIZE (512 << 10) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \ + (128 << 10)) + +/* + * Hardware drivers + */ + +/* + * NS16550 Configuration + */ +#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE (-4) +#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK + +/* + * select serial console configuration + */ +#define CONFIG_CONS_INDEX 3 +#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 +#define CONFIG_SERIAL3 3 /* UART3 on RX-51 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_OMAP_HSMMC +#define CONFIG_DOS_PARTITION + +/* USB */ +#define CONFIG_MUSB_UDC +#define CONFIG_MUSB_HDC +#define CONFIG_USB_OMAP3 +#define CONFIG_TWL4030_USB + +/* USB device configuration */ +#define CONFIG_USB_DEVICE +#define CONFIG_USBD_VENDORID 0x0421 +#define CONFIG_USBD_PRODUCTID 0x01c8 +#define CONFIG_USBD_MANUFACTURER "Nokia" +#define CONFIG_USBD_PRODUCT_NAME "N900" + +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_SYS_NO_FLASH + +/* commands to include */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_EXT2 /* EXT2 Support */ +#define CONFIG_CMD_EXT4 /* EXT4 Support */ +#define CONFIG_CMD_FAT /* FAT support */ + +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_MMC /* MMC support */ +#define CONFIG_CMD_GPIO /* Enable gpio command */ + +#define CONFIG_CMDLINE_EDITING /* add command line history */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ + +#define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */ + +#ifdef ONENAND_SUPPORT + +#define CONFIG_CMD_ONENAND /* ONENAND support */ +#define CONFIG_CMD_MTDPARTS /* mtd parts support */ + +#ifdef UBIFS_SUPPORT +#define CONFIG_CMD_UBI /* UBI Support */ +#define CONFIG_CMD_UBIFS /* UBIFS Support */ +#endif + +#endif + +/* commands not needed from config_cmd_default.h */ +#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ +#undef CONFIG_CMD_IMI /* iminfo */ +#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ +#undef CONFIG_CMD_NFS /* NFS support */ +#undef CONFIG_CMD_SAVEENV /* saveenv */ +#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */ + +#define CONFIG_OMAP3_SPI +#define CONFIG_HARD_I2C +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 1 +#define CONFIG_DRIVER_OMAP34XX_I2C + +/* + * TWL4030 + */ +#define CONFIG_TWL4030_POWER +#define CONFIG_TWL4030_LED +#define CONFIG_TWL4030_KEYPAD + +#define CONFIG_OMAP_GPIO +#define GPIO_SLIDE 71 + +/* + * Board ONENAND Info. + */ + +#define PART1_NAME "bootloader" +#define PART1_SIZE 128 +#define PART1_MULL 1024 +#define PART1_SUFF "k" +#define PART1_OFFS 0x00000000 +#define PART1_MASK 0x00000003 + +#define PART2_NAME "config" +#define PART2_SIZE 384 +#define PART2_MULL 1024 +#define PART2_SUFF "k" +#define PART2_OFFS 0x00020000 +#define PART2_MASK 0x00000000 + +#define PART3_NAME "log" +#define PART3_SIZE 256 +#define PART3_MULL 1024 +#define PART3_SUFF "k" +#define PART3_OFFS 0x00080000 +#define PART3_MASK 0x00000000 + +#define PART4_NAME "kernel" +#define PART4_SIZE 2 +#define PART4_MULL 1024*1024 +#define PART4_SUFF "m" +#define PART4_OFFS 0x000c0000 +#define PART4_MASK 0x00000000 + +#define PART5_NAME "initfs" +#define PART5_SIZE 2 +#define PART5_MULL 1024*1024 +#define PART5_SUFF "m" +#define PART5_OFFS 0x002c0000 +#define PART5_MASK 0x00000000 + +#define PART6_NAME "rootfs" +#define PART6_SIZE 257280 +#define PART6_MULL 1024 +#define PART6_SUFF "k" +#define PART6_OFFS 0x004c0000 +#define PART6_MASK 0x00000000 + +#ifdef ONENAND_SUPPORT + +#define PISMO1_NAND_SIZE GPMC_SIZE_128M +#define PISMO1_ONEN_SIZE GPMC_SIZE_128M +#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS + +#ifdef UBIFS_SUPPORT +#define CONFIG_RBTREE +#define CONFIG_LZO +#endif + +#define MTDIDS_DEFAULT "onenand0=onenand" +#define MTDPARTS_DEFAULT "mtdparts=onenand:" \ + __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \ + __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \ + __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \ + __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \ + __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \ + "-(" PART6_NAME ")" + +#endif + +/* Watchdog support */ +#define CONFIG_HW_WATCHDOG + +/* + * Framebuffer + */ +/* Video console */ +#define CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */ +#define CONFIG_VIDEO_LOGO +#define VIDEO_FB_16BPP_PIXEL_SWAP +#define VIDEO_FB_16BPP_WORD_SWAP +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_SPLASH_SCREEN + +/* functions for cfb_console */ +#define VIDEO_KBD_INIT_FCT rx51_kp_init() +#define VIDEO_TSTC_FCT rx51_kp_tstc +#define VIDEO_GETC_FCT rx51_kp_getc +#ifndef __ASSEMBLY__ +int rx51_kp_init(void); +int rx51_kp_tstc(void); +int rx51_kp_getc(void); +#endif + +#ifndef MTDPARTS_DEFAULT +#define MTDPARTS_DEFAULT +#endif + +/* Environment information */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "usbtty=cdc_acm\0" \ + "stdin=vga\0" \ + "stdout=vga\0" \ + "stderr=vga\0" \ + "setcon=setenv stdin ${con};" \ + "setenv stdout ${con};" \ + "setenv stderr ${con}\0" \ + "sercon=setenv con serial; run setcon\0" \ + "usbcon=setenv con usbtty; run setcon\0" \ + "vgacon=setenv con vga; run setcon\0" \ + "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \ + "switchmmc=mmc dev ${mmcnum}\0" \ + "kernaddr=0x82008000\0" \ + "initrdaddr=0x84008000\0" \ + "scriptaddr=0x86008000\0" \ + "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \ + "${loadaddr} ${mmcfile}\0" \ + "kernload=setenv loadaddr ${kernaddr};" \ + "setenv mmcfile ${mmckernfile};" \ + "run fileload\0" \ + "initrdload=setenv loadaddr ${initrdaddr};" \ + "setenv mmcfile ${mmcinitrdfile};" \ + "run fileload\0" \ + "scriptload=setenv loadaddr ${scriptaddr};" \ + "setenv mmcfile ${mmcscriptfile};" \ + "run fileload\0" \ + "scriptboot=echo Running ${mmcscriptfile} from mmc " \ + "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \ + "kernboot=echo Booting ${mmckernfile} from mmc " \ + "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \ + "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\ + "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \ + "attachboot=echo Booting attached kernel image ...;" \ + "setenv setup_omap_atag 1;" \ + "bootm ${attkernaddr};" \ + "setenv setup_omap_atag\0" \ + "trymmcscriptboot=if run switchmmc; then " \ + "if run scriptload; then " \ + "run scriptboot;" \ + "fi;" \ + "fi\0" \ + "trymmckernboot=if run switchmmc; then " \ + "if run kernload; then " \ + "run kernboot;" \ + "fi;" \ + "fi\0" \ + "trymmckerninitrdboot=if run switchmmc; then " \ + "if run initrdload; then " \ + "if run kernload; then " \ + "run kerninitrdboot;" \ + "fi;" \ + "fi; " \ + "fi\0" \ + "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \ + "setenv mmckernfile uImage; run trymmckernboot\0" \ + "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \ + "setenv mmcpart 2; run trymmcpartboot;" \ + "setenv mmcpart 3; run trymmcpartboot;" \ + "setenv mmcpart 4; run trymmcpartboot\0" \ + "trymmcboot=if run switchmmc; then " \ + "setenv mmctype fat;" \ + "run trymmcallpartboot;" \ + "setenv mmctype ext2;" \ + "run trymmcallpartboot;" \ + "setenv mmctype ext4;" \ + "run trymmcallpartboot;" \ + "fi\0" \ + "emmcboot=setenv mmcnum 1; run trymmcboot\0" \ + "sdboot=setenv mmcnum 0; run trymmcboot\0" \ + "" + +#define CONFIG_PREBOOT \ + "if run slide; then true; else run attachboot; fi;" \ + "echo Extra commands:;" \ + "echo run sercon - Use serial port for control.;" \ + "echo run usbcon - Use usbtty for control.;" \ + "echo run vgacon - Use framebuffer/keyboard.;" \ + "echo run sdboot - Boot from SD card slot.;" \ + "echo run emmcboot - Boot internal eMMC memory.;" \ + "echo run attachboot - Boot attached kernel image.;" \ + "echo" + +#define CONFIG_BOOTCOMMAND \ + "run sdboot;" \ + "run emmcboot;" \ + "run attachboot;" \ + "echo" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "Nokia RX-51 # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) + +#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) +#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/ + +/* default load address */ +#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) + +/* + * OMAP3 has 12 GP timers, they can be driven by the system clock + * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). + * This rate is divided by a local divisor. + */ +#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) +#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ +#define CONFIG_SYS_HZ 1000 + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 2 +#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 + +/* + * FLASH and environment organization + */ + +#define CONFIG_ENV_IS_NOWHERE + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 +#define CONFIG_SYS_INIT_RAM_SIZE 0x800 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) + +/* + * Attached kernel image + */ + +#define SDRAM_SIZE 0x10000000 /* 256 MB */ +#define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE) + +#define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */ +#define KERNEL_OFFSET 0x40000 /* 256 kB */ +#define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET) +#define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE) + +/* Reserve protected RAM for attached kernel */ +#define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1) + +#endif /* __CONFIG_H */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index f79f996450..7a3cc16a09 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -289,7 +289,7 @@ "userbutton_nonxm=gpio input 7;\0" /* "run userbutton" will return 1 (false) if is pressed and 0 (false) if not */ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run userbutton; then " \ "setenv bootenv uEnv.txt;" \ "else " \ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index 632a13fa9f..f6e4236998 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -162,7 +162,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index b975a6c9a4..b2457d0bc6 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -202,7 +202,7 @@ "mtdids=" MTDIDS_DEFAULT "\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ "mmcdev=0\0" \ - "autoboot=if mmc rescan ${mmcdev}; then " \ + "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index f6d6f75fca..626cf7afd5 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -188,7 +188,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 891e6f4363..e152055a64 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -198,7 +198,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h index cbc9bdb402..a32369af32 100644 --- a/include/configs/omap4_common.h +++ b/include/configs/omap4_common.h @@ -165,7 +165,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h index 743edfdcc5..623da777fa 100644 --- a/include/configs/omap5_evm.h +++ b/include/configs/omap5_evm.h @@ -167,7 +167,7 @@ "bootm ${loadaddr}\0" \ #define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index 6e8d8e9d57..9c948c5473 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -77,7 +77,8 @@ */ #ifdef CONFIG_CMD_MMC #define CONFIG_MMC -#define CONFIG_PXA_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_PXA_MMC_GENERIC #define CONFIG_SYS_MMC_BASE 0xF0000000 #define CONFIG_CMD_FAT #define CONFIG_CMD_EXT2 diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h index 24c53633f0..5a15af6b6a 100644 --- a/include/configs/pxa255_idp.h +++ b/include/configs/pxa255_idp.h @@ -245,7 +245,8 @@ #define RTC 1 /* enable 32KHz osc */ #ifdef CONFIG_MMC -#define CONFIG_PXA_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_PXA_MMC_GENERIC #define CONFIG_CMD_MMC #define CONFIG_SYS_MMC_BASE 0xF0000000 #endif diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index b8b970504f..5bc7b0d1d5 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -28,14 +28,10 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_MIPS32 1 /* MIPS32 CPU core */ -#define CONFIG_QEMU_MIPS 1 +#define CONFIG_MIPS32 /* MIPS32 CPU core */ +#define CONFIG_QEMU_MIPS #define CONFIG_MISC_INIT_R -/*IP address is default used by Qemu*/ -#define CONFIG_IPADDR 10.0.2.15 /* Our IP address */ -#define CONFIG_SERVERIP 10.0.2.2 /* Server IP address */ - #define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */ #define CONFIG_BAUDRATE 115200 @@ -74,31 +70,31 @@ #define CONFIG_CMD_DHCP #define CONFIG_DRIVER_NE2000 -#define CONFIG_DRIVER_NE2000_BASE (0xb4000300) +#define CONFIG_DRIVER_NE2000_BASE 0xb4000300 #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK 115200 -#define CONFIG_SYS_NS16550_COM1 (0xb40003f8) -#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_COM1 0xb40003f8 +#define CONFIG_CONS_INDEX 1 #define CONFIG_CMD_IDE #define CONFIG_DOS_PARTITION #define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_ATA_IDE0_OFFSET (0x1f0) -#define CONFIG_SYS_ATA_IDE1_OFFSET (0x170) -#define CONFIG_SYS_ATA_DATA_OFFSET (0) -#define CONFIG_SYS_ATA_REG_OFFSET (0) -#define CONFIG_SYS_ATA_BASE_ADDR (0xb4000000) +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 +#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 +#define CONFIG_SYS_ATA_DATA_OFFSET 0 +#define CONFIG_SYS_ATA_REG_OFFSET 0 +#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000 -#define CONFIG_SYS_IDE_MAXDEVICE (4) +#define CONFIG_SYS_IDE_MAXDEVICE 4 /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ /* Monitor Command Prompt */ #if defined(CONFIG_SYS_LITTLE_ENDIAN) @@ -111,9 +107,12 @@ #define CONFIG_CMDLINE_EDITING #define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 #define CONFIG_SYS_MALLOC_LEN 128*1024 @@ -125,9 +124,11 @@ #define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ +/* Cached addr */ +#define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */ +/* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x81000000 #define CONFIG_SYS_MEMTEST_START 0x80100000 #define CONFIG_SYS_MEMTEST_END 0x80800000 @@ -135,8 +136,8 @@ /*----------------------------------------------------------------------- * FLASH and environment organization */ - /* The following #defines are needed to get flash environment right */ +#define CONFIG_SYS_TEXT_BASE 0xbfc00000 /* Rom version */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (192 << 10) @@ -146,11 +147,11 @@ #define CONFIG_SYS_FLASH_BASE 0xbfc00000 #define CONFIG_SYS_MAX_FLASH_BANKS 1 #define CONFIG_SYS_MAX_FLASH_SECT 128 -#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) /* Address and size of Primary Environment Sector */ @@ -160,8 +161,6 @@ #define MEM_SIZE 128 -#undef CONFIG_MEMSIZE_IN_BYTES - #define CONFIG_LZMA /*----------------------------------------------------------------------- diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h new file mode 100644 index 0000000000..82647e2b1f --- /dev/null +++ b/include/configs/qemu-mips64.h @@ -0,0 +1,175 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * This file contains the configuration parameters for qemu-mips64 target. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MIPS64 /* MIPS64 CPU core */ +#define CONFIG_QEMU_MIPS +#define CONFIG_MISC_INIT_R + +#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "addmisc=setenv bootargs ${bootargs} " \ + "console=ttyS0,${baudrate} " \ + "panic=1\0" \ + "bootfile=/tftpboot/vmlinux\0" \ + "load=tftp ffffffff80500000 ${u-boot}\0" \ + "" + +#define CONFIG_BOOTCOMMAND "bootp;bootelf" + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS +#define CONFIG_CMD_DHCP + +#define CONFIG_DRIVER_NE2000 +#define CONFIG_DRIVER_NE2000_BASE 0xffffffffb4000300 + +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK 115200 +#define CONFIG_SYS_NS16550_COM1 0xffffffffb40003f8 +#define CONFIG_CONS_INDEX 1 + +#define CONFIG_CMD_IDE +#define CONFIG_DOS_PARTITION + +#define CONFIG_SYS_IDE_MAXBUS 2 +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 +#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 +#define CONFIG_SYS_ATA_DATA_OFFSET 0 +#define CONFIG_SYS_ATA_REG_OFFSET 0 +#define CONFIG_SYS_ATA_BASE_ADDR 0xffffffffb4000000 + +#define CONFIG_SYS_IDE_MAXDEVICE 4 + +#define CONFIG_CMD_RARP + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ + +/* Monitor Command Prompt */ +#if defined(CONFIG_SYS_LITTLE_ENDIAN) +#define CONFIG_SYS_PROMPT "qemu-mips64el # " +#else +#define CONFIG_SYS_PROMPT "qemu-mips64 # " +#endif + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_HUSH_PARSER + +/* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + +#define CONFIG_SYS_MALLOC_LEN 128*1024 + +#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 + +#define CONFIG_SYS_MHZ 132 + +#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) + +#define CONFIG_SYS_HZ 1000 + +/* Cached addr */ +#define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000 + +/* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0xffffffff81000000 + +#define CONFIG_SYS_MEMTEST_START 0xffffffff80100000 +#define CONFIG_SYS_MEMTEST_END 0xffffffff80800000 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +/* The following #defines are needed to get flash environment right */ +#define CONFIG_SYS_TEXT_BASE 0xffffffffbfc00000 /* Rom version */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (192 << 10) + +#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 + +/* We boot from this flash, selected with dip switch */ +#define CONFIG_SYS_FLASH_BASE 0xffffffffbfc00000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 128 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE + +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) + +/* Address and size of Primary Environment Sector */ +#define CONFIG_ENV_SIZE 0x8000 + +#define CONFIG_ENV_OVERWRITE 1 + +#define MEM_SIZE 128 + +#define CONFIG_LZMA + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CONFIG_SYS_DCACHE_SIZE 16384 +#define CONFIG_SYS_ICACHE_SIZE 16384 +#define CONFIG_SYS_CACHELINE_SIZE 32 + +#endif /* __CONFIG_H */ diff --git a/include/configs/quantum.h b/include/configs/quantum.h index 4f246510fe..072bd9c7ee 100644 --- a/include/configs/quantum.h +++ b/include/configs/quantum.h @@ -317,6 +317,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h deleted file mode 100644 index 46d60985d3..0000000000 --- a/include/configs/sbc8560.h +++ /dev/null @@ -1,459 +0,0 @@ -/* - * (C) Copyright 2002,2003 Motorola,Inc. - * Xianghua Xiao <X.Xiao@motorola.com> - * - * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>. - * Added support for Wind River SBC8560 board - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * sbc8560 board configuration file. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * Top level Makefile configuration choices - */ -#ifdef CONFIG_66 -#define CONFIG_PCI_66 -#endif - -/* - * High Level Configuration Options - */ -#define CONFIG_BOOKE 1 /* BOOKE */ -#define CONFIG_E500 1 /* BOOKE e500 family */ -#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */ -#define CONFIG_MPC85xx_REV1 1 /* MPC85xx Rev 1.0 chip */ - -#define CONFIG_SYS_TEXT_BASE 0xfffc0000 - - -#define CONFIG_CPM2 1 /* has CPM2 */ -#define CONFIG_SBC8560 1 /* configuration for SBC8560 board */ -#define CONFIG_MPC8560 1 - -/* XXX flagging this as something I might want to delete */ -#define CONFIG_MPC8560ADS 1 /* MPC8560ADS board specific */ - -#define CONFIG_TSEC_ENET /* tsec ethernet support */ -#undef CONFIG_PCI /* pci ethernet support */ -#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */ - -#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ - -#define CONFIG_ENV_OVERWRITE - -/* Using Localbus SDRAM to emulate flash before we can program the flash, - * normally you need a flash-boot image(u-boot.bin), if so undef this. - */ -#undef CONFIG_RAM_AS_FLASH - -#if defined(CONFIG_PCI_66) /* some PCI card is 33Mhz only */ - #define CONFIG_SYS_CLK_FREQ 66000000/* sysclk for MPC85xx */ -#else - #define CONFIG_SYS_CLK_FREQ 33000000/* most pci cards are 33Mhz */ -#endif - -/* below can be toggled for performance analysis. otherwise use default */ -#define CONFIG_L2_CACHE /* toggle L2 cache */ -#undef CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ - -#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \ - defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \ - defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC)) -#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC." -#endif - -#define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */ - -/* DDR Setup */ -#define CONFIG_FSL_DDR1 -#undef CONFIG_FSL_DDR_INTERACTIVE -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ -#undef CONFIG_DDR_SPD - -#if defined(CONFIG_MPC85xx_REV1) -#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN /* possible DLL fix needed */ -#endif - -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ -#define CONFIG_MEM_INIT_VALUE 0xDeadBeef - -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#define CONFIG_VERY_BIG_RAM - -#define CONFIG_NUM_DDR_CONTROLLERS 1 -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL 2 - -/* I2C addresses of SPD EEPROMs */ -#define SPD_EEPROM_ADDRESS 0x55 /* CTLR 0 DIMM 0 */ - -#undef CONFIG_CLOCKS_IN_MHZ - -#if defined(CONFIG_RAM_AS_FLASH) - #define CONFIG_SYS_LBC_SDRAM_BASE 0xfc000000 /* Localbus SDRAM */ - #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH 8M */ - #define CONFIG_SYS_BR0_PRELIM 0xf8000801 /* port size 8bit */ - #define CONFIG_SYS_OR0_PRELIM 0xf8000ff7 /* 8MB Flash */ -#else /* Boot from real Flash */ - #define CONFIG_SYS_LBC_SDRAM_BASE 0xf8000000 /* Localbus SDRAM */ - #define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of FLASH 8M */ - #define CONFIG_SYS_BR0_PRELIM 0xff800801 /* port size 8bit */ - #define CONFIG_SYS_OR0_PRELIM 0xff800ff7 /* 8MB Flash */ -#endif -#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ - -/* local bus definitions */ -#define CONFIG_SYS_BR1_PRELIM 0xe4001801 /* 64M, 32-bit flash */ -#define CONFIG_SYS_OR1_PRELIM 0xfc000ff7 - -#define CONFIG_SYS_BR2_PRELIM 0x00000000 /* CS2 not used */ -#define CONFIG_SYS_OR2_PRELIM 0x00000000 - -#define CONFIG_SYS_BR3_PRELIM 0xf0001861 /* 64MB localbus SDRAM */ -#define CONFIG_SYS_OR3_PRELIM 0xfc000cc1 - -#if defined(CONFIG_RAM_AS_FLASH) - #define CONFIG_SYS_BR4_PRELIM 0xf4001861 /* 64M localbus SDRAM */ -#else - #define CONFIG_SYS_BR4_PRELIM 0xf8001861 /* 64M localbus SDRAM */ -#endif -#define CONFIG_SYS_OR4_PRELIM 0xfc000cc1 - -#define CONFIG_SYS_BR5_PRELIM 0xfc000801 /* 16M CS5 misc devices */ -#if 1 - #define CONFIG_SYS_OR5_PRELIM 0xff000ff7 -#else - #define CONFIG_SYS_OR5_PRELIM 0xff0000f0 -#endif - -#define CONFIG_SYS_BR6_PRELIM 0xe0001801 /* 64M, 32-bit flash */ -#define CONFIG_SYS_OR6_PRELIM 0xfc000ff7 -#define CONFIG_SYS_LBC_LCRR 0x00030002 /* local bus freq */ -#define CONFIG_SYS_LBC_LBCR 0x00000000 -#define CONFIG_SYS_LBC_LSRT 0x20000000 -#define CONFIG_SYS_LBC_MRTPR 0x20000000 -#define CONFIG_SYS_LBC_LSDMR_1 0x2861b723 -#define CONFIG_SYS_LBC_LSDMR_2 0x0861b723 -#define CONFIG_SYS_LBC_LSDMR_3 0x0861b723 -#define CONFIG_SYS_LBC_LSDMR_4 0x1861b723 -#define CONFIG_SYS_LBC_LSDMR_5 0x4061b723 - -/* just hijack the MOT BCSR def for SBC8560 misc devices */ -#define CONFIG_SYS_BCSR ((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000) -/* the size of CS5 needs to be >= 16M for TLB and LAW setups */ - -#define CONFIG_SYS_INIT_RAM_LOCK 1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x70000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ - -/* Serial Port */ -#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK 1843200 /* get_bus_freq(0) */ -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONFIG_SYS_NS16550_COM1 ((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00700000) -#define CONFIG_SYS_NS16550_COM2 ((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00800000) - -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER - -/* pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -/* - * I2C - */ -#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ -#define CONFIG_HARD_I2C /* I2C with hardware support*/ -#undef CONFIG_SOFT_I2C /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ -#define CONFIG_SYS_I2C_OFFSET 0x3000 - -#define CONFIG_SYS_PCI_MEM_BASE 0xC0000000 -#define CONFIG_SYS_PCI_MEM_PHYS 0xC0000000 -#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 - -#ifdef CONFIG_TSEC_ENET - -#ifndef CONFIG_MII -#define CONFIG_MII 1 /* MII PHY management */ -#endif -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "TSEC0" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "TSEC1" -#define TSEC1_PHY_ADDR 0x19 -#define TSEC2_PHY_ADDR 0x1a -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC1_FLAGS TSEC_GIGABIT -#define TSEC2_FLAGS TSEC_GIGABIT - -/* Options are: TSEC[0-1] */ -#define CONFIG_ETHPRIME "TSEC0" - -#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ - - #undef CONFIG_ETHER_NONE /* define if ether on something else */ - #define CONFIG_ETHER_ON_FCC2 /* cpm FCC ethernet support */ - #define CONFIG_ETHER_INDEX 2 /* which channel for ether */ - - #if (CONFIG_ETHER_INDEX == 2) - /* - * - Rx-CLK is CLK13 - * - Tx-CLK is CLK14 - * - Select bus for bd/buffers - * - Full duplex - */ - #define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK) - #define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14) - #define CONFIG_SYS_CPMFCR_RAMTYPE 0 - #define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE) - - #elif (CONFIG_ETHER_INDEX == 3) - /* need more definitions here for FE3 */ - #endif /* CONFIG_ETHER_INDEX */ - - #define CONFIG_MII /* MII PHY management */ - #define CONFIG_BITBANGMII /* bit-bang MII PHY management */ - /* - * GPIO pins used for bit-banged MII communications - */ - #define MDIO_PORT 2 /* Port C */ - #define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) - #define MDC_DECLARE MDIO_DECLARE - - #define MDIO_ACTIVE (iop->pdir |= 0x00400000) - #define MDIO_TRISTATE (iop->pdir &= ~0x00400000) - #define MDIO_READ ((iop->pdat & 0x00400000) != 0) - - #define MDIO(bit) if(bit) iop->pdat |= 0x00400000; \ - else iop->pdat &= ~0x00400000 - - #define MDC(bit) if(bit) iop->pdat |= 0x00200000; \ - else iop->pdat &= ~0x00200000 - - #define MIIDELAY udelay(1) - -#endif - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#if 0 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION /* use hardware protection */ -#endif -#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ - -#if 0 -/* XXX This doesn't work and I don't want to fix it */ -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) - #define CONFIG_SYS_RAMBOOT -#else - #undef CONFIG_SYS_RAMBOOT -#endif -#endif - -/* Environment */ -#if !defined(CONFIG_SYS_RAMBOOT) - #if defined(CONFIG_RAM_AS_FLASH) - #define CONFIG_ENV_IS_NOWHERE - #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x100000) - #define CONFIG_ENV_SIZE 0x2000 - #else - #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) - #define CONFIG_ENV_SIZE 0x2000 /* CONFIG_ENV_SECT_SIZE */ - #endif -#else - #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ - #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) - #define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600" -/*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/ -#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PING -#define CONFIG_CMD_I2C -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) - #define CONFIG_CMD_PCI -#endif - -#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) - #define CONFIG_CMD_MII -#endif - -#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) - #undef CONFIG_CMD_SAVEENV - #undef CONFIG_CMD_LOADS -#endif - - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "SBC8560=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#endif - -/* You can compile in a MAC address and your custom net settings by using - * the following syntax. Your board should be marked with the assigned - * MAC addresses directly on it. - * - * #define CONFIG_ETHADDR de:ad:be:ef:00:00 - * #define CONFIG_ETH1ADDR fa:ke:ad:dr:es:s! - * #define CONFIG_SERVERIP <server ip> - * #define CONFIG_IPADDR <board ip> - * #define CONFIG_GATEWAYIP <gateway ip> - * #define CONFIG_NETMASK <your netmask> - */ - -#define CONFIG_HOSTNAME SBC8560 -#define CONFIG_ROOTPATH "/home/ppc" -#define CONFIG_BOOTFILE "uImage" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyS0\0" \ - "ramdiskaddr=2000000\0" \ - "ramdiskfile=ramdisk.uboot\0" \ - "fdtaddr=c00000\0" \ - "fdtfile=sbc8560.dtb\0" - -#define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" - - -#define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" - -#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND - -#endif /* __CONFIG_H */ diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index 0727a4c6f8..74d3b94887 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -81,6 +81,7 @@ #define CONFIG_SYS_MMC_ENV_PART 2 /* USB Host support */ +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index 1c0978da8a..a8a56fdeb4 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -66,6 +66,7 @@ * USB support (currently only works with D-cache off) ************************************************************/ #define CONFIG_USB_OHCI +#define CONFIG_USB_OHCI_S3C24XX #define CONFIG_USB_KEYBOARD #define CONFIG_USB_STORAGE #define CONFIG_DOS_PARTITION diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h index ae197018b8..c50832c1e0 100644 --- a/include/configs/suvd3.h +++ b/include/configs/suvd3.h @@ -23,19 +23,28 @@ /* * High Level Configuration Options */ -#define CONFIG_SUVD3 /* SUVD3 board specific */ -#define CONFIG_HOSTNAME suvd3 -#define CONFIG_KM_BOARD_NAME "suvd3" +/* This needs to be set prior to including km/km83xx-common.h */ #define CONFIG_SYS_TEXT_BASE 0xF0000000 +#if defined(CONFIG_SUVD3) /* SUVD3 board specific */ +#define CONFIG_HOSTNAME suvd3 +#define CONFIG_KM_BOARD_NAME "suvd3" /* include common defines/options for all 8321 Keymile boards */ #include "km/km8321-common.h" +#elif defined(CONFIG_KMVECT1) /* VECT1 board specific */ +#define CONFIG_HOSTNAME kmvect1 +#define CONFIG_KM_BOARD_NAME "kmvect1" +/* include common defines/options for all 8309 Keymile boards */ +#include "km/km8309-common.h" +#else +#error Supported boards are: SUVD3, KMVECT1 +#endif #define CONFIG_SYS_APP1_BASE 0xA0000000 -#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ +#define CONFIG_SYS_APP1_SIZE 256 /* Megabytes */ #define CONFIG_SYS_APP2_BASE 0xB0000000 -#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ +#define CONFIG_SYS_APP2_SIZE 256 /* Megabytes */ /* EEprom support */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h index 91686d66a7..2b24997f80 100644 --- a/include/configs/svm_sc8xx.h +++ b/include/configs/svm_sc8xx.h @@ -359,6 +359,8 @@ #undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ +#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */ #define CONFIG_IDE_8xx_DIRECT 1 /* Direct IDE not supported */ #undef CONFIG_IDE_LED /* LED for ide not supported */ #undef CONFIG_IDE_RESET /* reset for ide not supported */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h new file mode 100644 index 0000000000..d58c24c4aa --- /dev/null +++ b/include/configs/t4qds.h @@ -0,0 +1,875 @@ +/* + * Copyright 2011-2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Corenet DS style board configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#endif + +#define CONFIG_CMD_REGINFO + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E6500 +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_E500MC /* BOOKE e500mc family */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_MP /* support multiple processors */ + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS +#define CONFIG_FSL_IFC /* Enable IFC Support */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 /* PCIE controler 2 */ +#define CONFIG_PCIE3 /* PCIE controler 3 */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_SYS_SRIO +#define CONFIG_SRIO1 /* SRIO port 1 */ +#define CONFIG_SRIO2 /* SRIO port 2 */ + +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#define CONFIG_ENV_OVERWRITE + +#ifdef CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_NOWHERE +#else +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + +#ifndef CONFIG_SYS_NO_FLASH +#if defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_SDCARD) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (512 * 1097) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif +#else /* CONFIG_SYS_NO_FLASH */ +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + + + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk() +#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(void); +unsigned long get_board_ddr_clk(void); +#endif + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BTB /* toggle branch predition */ +#define CONFIG_DDR_ECC +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#define CONFIG_ENABLE_36BIT_PHYS + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ +#endif + +#if 0 +#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ +#endif +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00400000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +/* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE + +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull +#endif + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 2 +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 +#define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + +#define CONFIG_DDR_SPD +#define CONFIG_FSL_DDR3 + +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS1 0x51 +#define SPD_EEPROM_ADDRESS2 0x52 +#define SPD_EEPROM_ADDRESS3 0x53 +#define SPD_EEPROM_ADDRESS4 0x54 +#define SPD_EEPROM_ADDRESS5 0x55 +#define SPD_EEPROM_ADDRESS6 0x56 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * IFC Definitions + */ +#define CONFIG_SYS_FLASH_BASE 0xe0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) +#else +#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE +#endif + +#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 + +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x01) | \ + FTIM0_NOR_TEADC(0x01) | \ + FTIM0_NOR_TEAHC(0x20)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x01) | \ + FTIM2_NOR_TCH(0x0E) | \ + FTIM2_NOR_TWPH(0x0E) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} + +#define CONFIG_FSL_QIXIS /* use common QIXIS code */ +#define QIXIS_BASE 0xffdf0000 +#define QIXIS_LBMAP_SWITCH 6 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_LBMAP_SHIFT 0 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x04 +#define QIXIS_RST_CTL_RESET 0x83 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#ifdef CONFIG_PHYS_64BIT +#define QIXIS_BASE_PHYS (0xf00000000ull | QIXIS_BASE) +#else +#define QIXIS_BASE_PHYS QIXIS_BASE +#endif + +#define CONFIG_SYS_CSPR3_EXT (0xf) +#define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 \ + | CSPR_MSEL_GPCM \ + | CSPR_V) +#define CONFIG_SYS_AMASK3 IFC_AMASK(64*1024) +#define CONFIG_SYS_CSOR3 0x0 +/* QIXIS Timing parameters for IFC CS3 */ +#define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ + FTIM0_GPCM_TEADC(0x0e) | \ + FTIM0_GPCM_TEAHC(0x0e)) +#define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0xff) | \ + FTIM1_GPCM_TRAD(0x3f)) +#define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ + FTIM2_GPCM_TCH(0x0) | \ + FTIM2_GPCM_TWP(0x1f)) +#define CONFIG_SYS_CS3_FTIM3 0x0 + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_BASE 0xff800000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) +#else +#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE +#endif + +#define CONFIG_SYS_NAND_CSPR_EXT (0xf) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ + | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ + | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \ + | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_DDR_LAW 11 + +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +#if defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR1_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#else +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe0ec000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS +#endif +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x118000 +#define CONFIG_SYS_I2C2_OFFSET 0x118100 +#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ +#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ + +/* VSC Crossbar switches */ +#define CONFIG_VSC_CROSSBAR +#define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_VSC3316_FS 0xc +#define I2C_MUX_CH_VSC3316_BS 0xd +#define VSC3316_FSM_TX_ADDR 0x70 +#define VSC3316_FSM_RX_ADDR 0x71 + +/* + * RapidIO + */ +#define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 +#endif +#define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ + +#define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull +#else +#define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 +#endif +#define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ + +/* + * for slave u-boot IMAGE instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +/* + * for slave UCODE and ENV instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ + +/* slave core release by master*/ +#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 +#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ + +/* + * SRIO_PCIE_BOOT - SLAVE + */ +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 +#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) +#endif +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#else +#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 +#endif +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#else +#define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 +#endif +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* controller 2, Slot 2, tgtid 2, Base address 201000 */ +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#else +#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 +#endif +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull +#else +#define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 +#endif +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull +#else +#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 +#endif +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull +#else +#define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 +#endif +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +/* controller 4, Base address 203000 */ +#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull +#define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull +#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ + +/* Qman/Bman */ +#ifndef CONFIG_NOBQFMAN +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 50 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#else +#define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE +#endif +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 50 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#else +#define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE +#endif +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +#define CONFIG_SYS_PMAN +#define CONFIG_SYS_DPAA_DCE +#define CONFIG_SYS_INTERLAKEN + +/* Default address of microcode for the Linux Fman driver */ +#if defined(CONFIG_SPIFLASH) +/* + * env is stored at 0x100000, sector size is 0x10000, ucode is stored after + * env, so we got 0x110000. + */ +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 +#elif defined(CONFIG_SDCARD) +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 545KB (1089 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_QE_FMAN_FW_IN_NAND +#define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#else +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEFF40000 +#endif +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif /* CONFIG_NOBQFMAN */ + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_TERANETICS +#define SGMII_CARD_PORT1_PHY_ADDR 0x1C +#define SGMII_CARD_PORT2_PHY_ADDR 0x1D +#define SGMII_CARD_PORT3_PHY_ADDR 0x1E +#define SGMII_CARD_PORT4_PHY_ADDR 0x1F +#define XFI_CARD_PORT1_PHY_ADDR 0x1 /* tmp, FIXME below addr */ +#define XFI_CARD_PORT2_PHY_ADDR 0x2 +#define XFI_CARD_PORT3_PHY_ADDR 0x3 +#define XFI_CARD_PORT4_PHY_ADDR 0x4 +#define QSGMII_CARD_PHY_ADDR 0x5 +#define FM1_10GEC1_PHY_ADDR 0x6 +#define FM1_10GEC2_PHY_ADDR 0x7 +#define FM2_10GEC1_PHY_ADDR 0x8 +#define FM2_10GEC2_PHY_ADDR 0x9 +#endif + +#ifdef CONFIG_PCI +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_E1000 + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_PCI */ + +/* SATA */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * Environment + */ +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* +* USB +*/ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#define CONFIG_HAS_FSL_DR_USB + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ + +#define CONFIG_BAUDRATE 115200 + +#define __USB_PHY_TYPE utmi + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:ctlr_intlv=3way_4KB," \ + "bank_intlv=auto;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t4240qds/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t4240qds/t4240qds.dtb\0" \ + "bdev=sda3\0" \ + "c=ffe\0" + +/* For emulation this causes u-boot to jump to the start of the proof point + app code automatically */ +#define CONFIG_PROOF_POINTS \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x29000000 - - -;" \ + "cpu 2 release 0x29000000 - - -;" \ + "cpu 3 release 0x29000000 - - -;" \ + "cpu 4 release 0x29000000 - - -;" \ + "cpu 5 release 0x29000000 - - -;" \ + "cpu 6 release 0x29000000 - - -;" \ + "cpu 7 release 0x29000000 - - -;" \ + "go 0x29000000" + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#define CONFIG_ALU \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "cpu 1 release 0x01000000 - - -;" \ + "cpu 2 release 0x01000000 - - -;" \ + "cpu 3 release 0x01000000 - - -;" \ + "cpu 4 release 0x01000000 - - -;" \ + "cpu 5 release 0x01000000 - - -;" \ + "cpu 6 release 0x01000000 - - -;" \ + "cpu 7 release 0x01000000 - - -;" \ + "go 0x01000000" + +#define CONFIG_LINUX \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#ifdef CONFIG_SECURE_BOOT +#include <asm/fsl_secure_boot.h> +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 9698c23dad..6835155d11 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -95,8 +95,6 @@ #endif #define BOOTCMDS_COMMON \ - "scriptaddr=0x400000\0" \ - \ "rootpart=1\0" \ \ "script_boot=" \ @@ -140,10 +138,36 @@ #endif +/* + * Memory layout for where various images get loaded by boot scripts: + * + * scriptaddr can be pretty much anywhere that doesn't conflict with something + * else. Put it above BOOTMAPSZ to eliminate conflicts. + * + * kernel_addr_r must be within the first 128M of RAM in order for the + * kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will + * decompress itself to 0x8000 after the start of RAM, kernel_addr_r + * should not overlap that area, or the kernel will have to copy itself + * somewhere else before decompression. Similarly, the address of any other + * data passed to the kernel shouldn't overlap the start of RAM. Pushing + * this up to 16M allows for a sizable kernel to be decompressed below the + * compressed load address. + * + * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for + * the compressed kernel to be up to 16M too. + * + * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows + * for the FDT/DTB to be up to 1M, which is hopefully plenty. + */ +#define MEM_LAYOUT_ENV_SETTINGS \ + "scriptaddr=0x10000000\0" \ + "kernel_addr_r=0x01000000\0" \ + "fdt_addr_r=0x02000000\0" \ + "ramdisk_addr_r=0x02100000\0" \ + #define CONFIG_EXTRA_ENV_SETTINGS \ TEGRA_DEVICE_SETTINGS \ - "fdt_load=0x01000000\0" \ - "fdt_high=01100000\0" \ + MEM_LAYOUT_ENV_SETTINGS \ BOOTCMDS_COMMON /* overrides for SPL build here */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index dc7444d1cc..15bd9bb146 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -169,8 +169,11 @@ #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */ #define CONFIG_SYS_TEXT_BASE 0x0010c000 +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ + #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ @@ -184,9 +187,13 @@ /* Defines for SPL */ #define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_RAM_DEVICE +#define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_NAND_SIMPLE #define CONFIG_SPL_TEXT_BASE 0x00108000 -#define CONFIG_SPL_MAX_SIZE 0x00004000 +#define CONFIG_SPL_MAX_SIZE (CONFIG_SYS_TEXT_BASE - \ + CONFIG_SPL_TEXT_BASE) #define CONFIG_SYS_SPL_MALLOC_START 0x00090000 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 #define CONFIG_SPL_STACK 0x000ffffc @@ -198,5 +205,6 @@ #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/tegra20/u-boot-spl.lds" #define CONFIG_SYS_NAND_SELF_INIT +#define CONFIG_SYS_NAND_ONFI_DETECTION #endif /* __TEGRA20_COMMON_H */ diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h index 23cab88ded..d6371fce4d 100644 --- a/include/configs/tnetv107x_evm.h +++ b/include/configs/tnetv107x_evm.h @@ -32,6 +32,7 @@ #define CONFIG_ARM1176 #define CONFIG_TNETV107X #define CONFIG_TNETV107X_EVM +#define CONFIG_TNETV107X_WATCHDOG #define CONFIG_ARCH_CPU_INIT #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_DISABLE_TCM diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index 00d02e8ca0..5859a7337b 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -201,7 +201,7 @@ "run nandargs; " \ "run loaduimage_ubi; " \ "bootm ${loadaddr}\0" \ - "autoboot=if mmc rescan ${mmcdev}; then " \ + "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \ "if run loadbootscript; then " \ "run bootscript; " \ "else " \ diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h index bc69c1ea2b..c1bfe31e46 100644 --- a/include/configs/trizepsiv.h +++ b/include/configs/trizepsiv.h @@ -170,7 +170,8 @@ #define CONFIG_SYS_CPUSPEED 0x207 /* need to look more closely, I think this is Turbo = 2x, L=91Mhz */ #ifdef CONFIG_MMC -#define CONFIG_PXA_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_PXA_MMC_GENERIC #define CONFIG_CMD_MMC #define CONFIG_SYS_MMC_BASE 0xF0000000 #endif diff --git a/include/configs/uc100.h b/include/configs/uc100.h index 8c8fb5ae69..450c98bd3a 100644 --- a/include/configs/uc100.h +++ b/include/configs/uc100.h @@ -331,6 +331,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/configs/versatile.h b/include/configs/versatile.h index 38f5302e71..a65c6762b3 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -230,6 +230,7 @@ #define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */ #endif #endif /* __CONFIG_H */ diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h index 4bb96cc1ab..c2c0d1d243 100644 --- a/include/configs/virtlab2.h +++ b/include/configs/virtlab2.h @@ -329,6 +329,7 @@ *----------------------------------------------------------------------- */ +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ diff --git a/include/dwmmc.h b/include/dwmmc.h new file mode 100644 index 0000000000..c8b1d408e2 --- /dev/null +++ b/include/dwmmc.h @@ -0,0 +1,191 @@ +/* + * (C) Copyright 2012 SAMSUNG Electronics + * Jaehoon Chung <jh80.chung@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __DWMMC_HW_H +#define __DWMMC_HW_H + +#include <asm/io.h> +#include <mmc.h> + +#define DWMCI_CTRL 0x000 +#define DWMCI_PWREN 0x004 +#define DWMCI_CLKDIV 0x008 +#define DWMCI_CLKSRC 0x00C +#define DWMCI_CLKENA 0x010 +#define DWMCI_TMOUT 0x014 +#define DWMCI_CTYPE 0x018 +#define DWMCI_BLKSIZ 0x01C +#define DWMCI_BYTCNT 0x020 +#define DWMCI_INTMASK 0x024 +#define DWMCI_CMDARG 0x028 +#define DWMCI_CMD 0x02C +#define DWMCI_RESP0 0x030 +#define DWMCI_RESP1 0x034 +#define DWMCI_RESP2 0x038 +#define DWMCI_RESP3 0x03C +#define DWMCI_MINTSTS 0x040 +#define DWMCI_RINTSTS 0x044 +#define DWMCI_STATUS 0x048 +#define DWMCI_FIFOTH 0x04C +#define DWMCI_CDETECT 0x050 +#define DWMCI_WRTPRT 0x054 +#define DWMCI_GPIO 0x058 +#define DWMCI_TCMCNT 0x05C +#define DWMCI_TBBCNT 0x060 +#define DWMCI_DEBNCE 0x064 +#define DWMCI_USRID 0x068 +#define DWMCI_VERID 0x06C +#define DWMCI_HCON 0x070 +#define DWMCI_UHS_REG 0x074 +#define DWMCI_BMOD 0x080 +#define DWMCI_PLDMND 0x084 +#define DWMCI_DBADDR 0x088 +#define DWMCI_IDSTS 0x08C +#define DWMCI_IDINTEN 0x090 +#define DWMCI_DSCADDR 0x094 +#define DWMCI_BUFADDR 0x098 +#define DWMCI_DATA 0x200 + +/* Interrupt Mask register */ +#define DWMCI_INTMSK_ALL 0xffffffff +#define DWMCI_INTMSK_RE (1 << 1) +#define DWMCI_INTMSK_CDONE (1 << 2) +#define DWMCI_INTMSK_DTO (1 << 3) +#define DWMCI_INTMSK_TXDR (1 << 4) +#define DWMCI_INTMSK_RXDR (1 << 5) +#define DWMCI_INTMSK_DCRC (1 << 7) +#define DWMCI_INTMSK_RTO (1 << 8) +#define DWMCI_INTMSK_DRTO (1 << 9) +#define DWMCI_INTMSK_HTO (1 << 10) +#define DWMCI_INTMSK_FRUN (1 << 11) +#define DWMCI_INTMSK_HLE (1 << 12) +#define DWMCI_INTMSK_SBE (1 << 13) +#define DWMCI_INTMSK_ACD (1 << 14) +#define DWMCI_INTMSK_EBE (1 << 15) + +/* Raw interrupt Regsiter */ +#define DWMCI_DATA_ERR (DWMCI_INTMSK_EBE | DWMCI_INTMSK_SBE | DWMCI_INTMSK_HLE |\ + DWMCI_INTMSK_FRUN | DWMCI_INTMSK_EBE | DWMCI_INTMSK_DCRC) +#define DWMCI_DATA_TOUT (DWMCI_INTMSK_HTO | DWMCI_INTMSK_DRTO) +/* CTRL register */ +#define DWMCI_CTRL_RESET (1 << 0) +#define DWMCI_CTRL_FIFO_RESET (1 << 1) +#define DWMCI_CTRL_DMA_RESET (1 << 2) +#define DWMCI_DMA_EN (1 << 5) +#define DWMCI_CTRL_SEND_AS_CCSD (1 << 10) +#define DWMCI_IDMAC_EN (1 << 25) +#define DWMCI_RESET_ALL (DWMCI_CTRL_RESET | DWMCI_CTRL_FIFO_RESET |\ + DWMCI_CTRL_DMA_RESET) + +/* CMD register */ +#define DWMCI_CMD_RESP_EXP (1 << 6) +#define DWMCI_CMD_RESP_LENGTH (1 << 7) +#define DWMCI_CMD_CHECK_CRC (1 << 8) +#define DWMCI_CMD_DATA_EXP (1 << 9) +#define DWMCI_CMD_RW (1 << 10) +#define DWMCI_CMD_SEND_STOP (1 << 12) +#define DWMCI_CMD_ABORT_STOP (1 << 14) +#define DWMCI_CMD_PRV_DAT_WAIT (1 << 13) +#define DWMCI_CMD_UPD_CLK (1 << 21) +#define DWMCI_CMD_USE_HOLD_REG (1 << 29) +#define DWMCI_CMD_START (1 << 31) + +/* CLKENA register */ +#define DWMCI_CLKEN_ENABLE (1 << 0) +#define DWMCI_CLKEN_LOW_PWR (1 << 16) + +/* Card-type registe */ +#define DWMCI_CTYPE_1BIT 0 +#define DWMCI_CTYPE_4BIT (1 << 0) +#define DWMCI_CTYPE_8BIT (1 << 16) + +/* Status Register */ +#define DWMCI_BUSY (1 << 9) + +/* FIFOTH Register */ +#define MSIZE(x) ((x) << 28) +#define RX_WMARK(x) ((x) << 16) +#define TX_WMARK(x) (x) + +#define DWMCI_IDMAC_OWN (1 << 31) +#define DWMCI_IDMAC_CH (1 << 4) +#define DWMCI_IDMAC_FS (1 << 3) +#define DWMCI_IDMAC_LD (1 << 2) + +/* Bus Mode Register */ +#define DWMCI_BMOD_IDMAC_RESET (1 << 0) +#define DWMCI_BMOD_IDMAC_FB (1 << 1) +#define DWMCI_BMOD_IDMAC_EN (1 << 7) + +struct dwmci_host { + char *name; + void *ioaddr; + unsigned int quirks; + unsigned int caps; + unsigned int version; + unsigned int clock; + unsigned int bus_hz; + int dev_index; + int buswidth; + u32 fifoth_val; + struct mmc *mmc; + + void (*clksel)(struct dwmci_host *host); + unsigned int (*mmc_clk)(int dev_index); +}; + +struct dwmci_idmac { + u32 flags; + u32 cnt; + u32 addr; + u32 next_addr; +}; + +static inline void dwmci_writel(struct dwmci_host *host, int reg, u32 val) +{ + writel(val, host->ioaddr + reg); +} + +static inline void dwmci_writew(struct dwmci_host *host, int reg, u16 val) +{ + writew(val, host->ioaddr + reg); +} + +static inline void dwmci_writeb(struct dwmci_host *host, int reg, u8 val) +{ + writeb(val, host->ioaddr + reg); +} +static inline u32 dwmci_readl(struct dwmci_host *host, int reg) +{ + return readl(host->ioaddr + reg); +} + +static inline u16 dwmci_readw(struct dwmci_host *host, int reg) +{ + return readw(host->ioaddr + reg); +} + +static inline u8 dwmci_readb(struct dwmci_host *host, int reg) +{ + return readb(host->ioaddr + reg); +} + +int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk); +#endif /* __DWMMC_HW_H */ diff --git a/include/e500.h b/include/e500.h index e1708b9dc9..0ff8e89a1e 100644 --- a/include/e500.h +++ b/include/e500.h @@ -18,6 +18,9 @@ typedef struct #ifdef CONFIG_SYS_DPAA_FMAN unsigned long freqFMan[CONFIG_SYS_NUM_FMAN]; #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + unsigned long freqQMAN; +#endif #ifdef CONFIG_SYS_DPAA_PME unsigned long freqPME; #endif diff --git a/include/env_default.h b/include/env_default.h new file mode 100644 index 0000000000..a1db73a2c5 --- /dev/null +++ b/include/env_default.h @@ -0,0 +1,136 @@ +/* + * (C) Copyright 2000-2010 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Andreas Heppel <aheppel@sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifdef DEFAULT_ENV_INSTANCE_EMBEDDED +env_t environment __PPCENV__ = { + ENV_CRC, /* CRC Sum */ +#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT + 1, /* Flags: valid */ +#endif + { +#elif defined(DEFAULT_ENV_INSTANCE_STATIC) +static char default_environment[] = { +#else +const uchar default_environment[] = { +#endif +#ifdef CONFIG_BOOTARGS + "bootargs=" CONFIG_BOOTARGS "\0" +#endif +#ifdef CONFIG_BOOTCOMMAND + "bootcmd=" CONFIG_BOOTCOMMAND "\0" +#endif +#ifdef CONFIG_RAMBOOTCOMMAND + "ramboot=" CONFIG_RAMBOOTCOMMAND "\0" +#endif +#ifdef CONFIG_NFSBOOTCOMMAND + "nfsboot=" CONFIG_NFSBOOTCOMMAND "\0" +#endif +#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) + "bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0" +#endif +#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0) + "baudrate=" __stringify(CONFIG_BAUDRATE) "\0" +#endif +#ifdef CONFIG_LOADS_ECHO + "loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0" +#endif +#ifdef CONFIG_ETHADDR + "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" +#endif +#ifdef CONFIG_ETH1ADDR + "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" +#endif +#ifdef CONFIG_ETH2ADDR + "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" +#endif +#ifdef CONFIG_ETH3ADDR + "eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0" +#endif +#ifdef CONFIG_ETH4ADDR + "eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0" +#endif +#ifdef CONFIG_ETH5ADDR + "eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0" +#endif +#ifdef CONFIG_ETHPRIME + "ethprime=" CONFIG_ETHPRIME "\0" +#endif +#ifdef CONFIG_IPADDR + "ipaddr=" __stringify(CONFIG_IPADDR) "\0" +#endif +#ifdef CONFIG_SERVERIP + "serverip=" __stringify(CONFIG_SERVERIP) "\0" +#endif +#ifdef CONFIG_SYS_AUTOLOAD + "autoload=" CONFIG_SYS_AUTOLOAD "\0" +#endif +#ifdef CONFIG_PREBOOT + "preboot=" CONFIG_PREBOOT "\0" +#endif +#ifdef CONFIG_ROOTPATH + "rootpath=" CONFIG_ROOTPATH "\0" +#endif +#ifdef CONFIG_GATEWAYIP + "gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0" +#endif +#ifdef CONFIG_NETMASK + "netmask=" __stringify(CONFIG_NETMASK) "\0" +#endif +#ifdef CONFIG_HOSTNAME + "hostname=" __stringify(CONFIG_HOSTNAME) "\0" +#endif +#ifdef CONFIG_BOOTFILE + "bootfile=" CONFIG_BOOTFILE "\0" +#endif +#ifdef CONFIG_LOADADDR + "loadaddr=" __stringify(CONFIG_LOADADDR) "\0" +#endif +#ifdef CONFIG_CLOCKS_IN_MHZ + "clocks_in_mhz=1\0" +#endif +#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0) + "pcidelay=" __stringify(CONFIG_PCI_BOOTDELAY)"\0" +#endif +#ifdef CONFIG_ENV_VARS_UBOOT_CONFIG + "arch=" CONFIG_SYS_ARCH "\0" + "cpu=" CONFIG_SYS_CPU "\0" + "board=" CONFIG_SYS_BOARD "\0" + "board_name=" CONFIG_SYS_BOARD "\0" +#ifdef CONFIG_SYS_VENDOR + "vendor=" CONFIG_SYS_VENDOR "\0" +#endif +#ifdef CONFIG_SYS_SOC + "soc=" CONFIG_SYS_SOC "\0" +#endif +#endif +#ifdef CONFIG_EXTRA_ENV_SETTINGS + CONFIG_EXTRA_ENV_SETTINGS +#endif + "\0" +#ifdef DEFAULT_ENV_INSTANCE_EMBEDDED + } +#endif +}; diff --git a/include/ext4fs.h b/include/ext4fs.h index 23298fcd7d..3b59d15aab 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -116,7 +116,7 @@ struct ext_filesystem { extern struct ext2_data *ext4fs_root; extern struct ext2fs_node *ext4fs_file; -#if defined(CONFIG_CMD_EXT4_WRITE) +#if defined(CONFIG_EXT4_WRITE) extern struct ext2_inode *g_parent_inode; extern int gd_index; extern int gindex; diff --git a/include/ext_common.h b/include/ext_common.h index ce73857f8d..86373a6e50 100644 --- a/include/ext_common.h +++ b/include/ext_common.h @@ -195,7 +195,4 @@ int do_ext4_load(cmd_tbl_t *cmdtp, int flag, int argc, int do_ext4_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]); int do_ext4_write(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]); -int do_ext_load(cmd_tbl_t *cmdtp, int flag, int argc, - char *const argv[]); -int do_ext_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]); #endif diff --git a/include/fat.h b/include/fat.h index cc85b06395..706cd7a4bd 100644 --- a/include/fat.h +++ b/include/fat.h @@ -212,6 +212,7 @@ long file_fat_read_at(const char *filename, unsigned long pos, void *buffer, unsigned long maxsize); long file_fat_read(const char *filename, void *buffer, unsigned long maxsize); const char *file_getfsname(int idx); +int fat_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info); int fat_register_device(block_dev_desc_t *dev_desc, int part_no); int file_fat_write(const char *filename, void *buffer, unsigned long maxsize); diff --git a/include/flash.h b/include/flash.h index 6d70bdd81d..7db599e783 100644 --- a/include/flash.h +++ b/include/flash.h @@ -348,7 +348,6 @@ extern flash_info_t *flash_get_info(ulong base); #define TOSH_ID_FVT160 0xC2 /* TC58FVT160 ID (16 M, top ) */ #define TOSH_ID_FVB160 0x43 /* TC58FVT160 ID (16 M, bottom ) */ -#define PHILIPS_LPC2292 0x0401FF13 /* LPC2292 internal FLASH */ #define NUMONYX_256MBIT 0x8922 /* Numonyx P33/30 256MBit 65nm */ /*----------------------------------------------------------------------- diff --git a/include/fm_eth.h b/include/fm_eth.h index e56541df1b..495765b933 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2011 Freescale Semiconductor, Inc. + * Copyright 2009-2012 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as @@ -30,13 +30,21 @@ enum fm_port { FM1_DTSEC3, FM1_DTSEC4, FM1_DTSEC5, + FM1_DTSEC6, + FM1_DTSEC9, + FM1_DTSEC10, FM1_10GEC1, + FM1_10GEC2, FM2_DTSEC1, FM2_DTSEC2, FM2_DTSEC3, FM2_DTSEC4, FM2_DTSEC5, + FM2_DTSEC6, + FM2_DTSEC9, + FM2_DTSEC10, FM2_10GEC1, + FM2_10GEC2, NUM_FM_PORTS, }; @@ -45,8 +53,15 @@ enum fm_eth_type { FM_ETH_10G_E, }; +#ifdef CONFIG_SYS_FMAN_V3 +#define CONFIG_SYS_FM1_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfc000) +#define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xfd000) +#define CONFIG_SYS_FM2_DTSEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfc000) +#define CONFIG_SYS_FM2_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM2_ADDR + 0xfd000) +#else #define CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xe1120) #define CONFIG_SYS_FM1_TGEC_MDIO_ADDR (CONFIG_SYS_FSL_FM1_ADDR + 0xf1000) +#endif #define DEFAULT_FM_MDIO_NAME "FSL_MDIO0" #define DEFAULT_FM_TGEC_MDIO_NAME "FM_TGEC_MDIO" @@ -57,6 +72,33 @@ enum fm_eth_type { .phy_regs = (void *)pregs, \ .enet_if = PHY_INTERFACE_MODE_NONE, \ +#ifdef CONFIG_SYS_FMAN_V3 +#define FM_DTSEC_INFO_INITIALIZER(idx, n) \ +{ \ + FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC_MDIO_ADDR) \ + .index = idx, \ + .num = n - 1, \ + .type = FM_ETH_1G_E, \ + .port = FM##idx##_DTSEC##n, \ + .rx_port_id = RX_PORT_1G_BASE + n - 1, \ + .tx_port_id = TX_PORT_1G_BASE + n - 1, \ + .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ + offsetof(struct ccsr_fman, memac[n-1]),\ +} + +#define FM_TGEC_INFO_INITIALIZER(idx, n) \ +{ \ + FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \ + .index = idx, \ + .num = n - 1, \ + .type = FM_ETH_10G_E, \ + .port = FM##idx##_10GEC##n, \ + .rx_port_id = RX_PORT_10G_BASE + n - 1, \ + .tx_port_id = TX_PORT_10G_BASE + n - 1, \ + .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ + offsetof(struct ccsr_fman, memac[n-1]),\ +} +#else #define FM_DTSEC_INFO_INITIALIZER(idx, n) \ { \ FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR) \ @@ -82,7 +124,7 @@ enum fm_eth_type { .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ offsetof(struct ccsr_fman, mac_10g[n-1]),\ } - +#endif struct fm_eth_info { u8 enabled; u8 fm; @@ -104,7 +146,14 @@ struct tgec_mdio_info { char *name; }; +struct memac_mdio_info { + struct memac_mdio_controller *regs; + char *name; +}; + int fm_tgec_mdio_init(bd_t *bis, struct tgec_mdio_info *info); +int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info); + int fm_standard_init(bd_t *bis); void fman_enet_init(void); void fdt_fixup_fman_ethernet(void *fdt); diff --git a/include/fs.h b/include/fs.h new file mode 100644 index 0000000000..4f30a385a0 --- /dev/null +++ b/include/fs.h @@ -0,0 +1,65 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef _FS_H +#define _FS_H + +#include <common.h> + +#define FS_TYPE_ANY 0 +#define FS_TYPE_FAT 1 +#define FS_TYPE_EXT 2 + +/* + * Tell the fs layer which block device an partition to use for future + * commands. This also internally identifies the filesystem that is present + * within the partition. The identification process may be limited to a + * specific filesystem type by passing FS_* in the fstype parameter. + * + * Returns 0 on success. + * Returns non-zero if there is an error accessing the disk or partition, or + * no known filesystem type could be recognized on it. + */ +int fs_set_blk_dev(const char *ifname, const char *dev_part_str, int fstype); + +/* + * Print the list of files on the partition previously set by fs_set_blk_dev(), + * in directory "dirname". + * + * Returns 0 on success. Returns non-zero on error. + */ +int fs_ls(const char *dirname); + +/* + * Read file "filename" from the partition previously set by fs_set_blk_dev(), + * to address "addr", starting at byte offset "offset", and reading "len" + * bytes. "offset" may be 0 to read from the start of the file. "len" may be + * 0 to read the entire file. Note that not all filesystem types support + * either/both offset!=0 or len!=0. + * + * Returns number of bytes read on success. Returns <= 0 on error. + */ +int fs_read(const char *filename, ulong addr, int offset, int len); + +/* + * Common implementation for various filesystem commands, optionally limited + * to a specific filesystem type via the fstype parameter. + */ +int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], + int fstype, int cmdline_base); +int do_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[], + int fstype); + +#endif /* _FS_H */ diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h index ea8b54b56f..e24e828cd1 100644 --- a/include/fsl_mdio.h +++ b/include/fsl_mdio.h @@ -1,5 +1,5 @@ /* - * Copyright 2009-2010 Freescale Semiconductor, Inc. + * Copyright 2009-2012 Freescale Semiconductor, Inc. * Jun-jie Zhang <b18070@freescale.com> * Mingkai Hu <Mingkai.hu@freescale.com> * @@ -51,6 +51,10 @@ int tsec_local_mdio_read(struct tsec_mii_mng *phyregs, int port_addr, int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum); int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum, u16 value); +int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum, u16 value); +int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, + int regnum); struct fsl_pq_mdio_info { struct tsec_mii_mng *regs; diff --git a/include/i8042.h b/include/i8042.h index 13952899ba..c48c057374 100644 --- a/include/i8042.h +++ b/include/i8042.h @@ -39,6 +39,12 @@ #define I8042_STATUS_REG (CONFIG_SYS_ISA_IO + 0x0064) /* keyboard status read */ #define I8042_COMMAND_REG (CONFIG_SYS_ISA_IO + 0x0064) /* keyboard ctrl write */ +enum { + /* Output register (I8042_DATA_REG) has data for system */ + I8042_STATUS_OUT_DATA = 1 << 0, + I8042_STATUS_IN_DATA = 1 << 1, +}; + #define KBD_US 0 /* default US layout */ #define KBD_GER 1 /* german layout */ @@ -69,6 +75,19 @@ /* exports */ +/** + * Flush all buffer from keyboard controller to host. + */ +void i8042_flush(void); + +/** + * Disables the keyboard so that key strokes no longer generate scancodes to + * the host. + * + * @return 0 if ok, -1 if keyboard input was found while disabling + */ +int i8042_disable(void); + int i8042_kbd_init(void); int i8042_tstc(void); int i8042_getc(void); diff --git a/include/ide.h b/include/ide.h index 95dcbdd362..158e1beaf9 100644 --- a/include/ide.h +++ b/include/ide.h @@ -27,6 +27,7 @@ #define IDE_BUS(dev) (dev / (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS)) #define ATA_CURR_BASE(dev) (CONFIG_SYS_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)]) +extern ulong ide_bus_offset[]; #ifdef CONFIG_IDE_LED @@ -42,8 +43,10 @@ #ifdef CONFIG_SYS_64BIT_LBA typedef uint64_t lbaint_t; +#define LBAF "%llx" #else typedef ulong lbaint_t; +#define LBAF "%lx" #endif /* @@ -54,6 +57,14 @@ void ide_init(void); ulong ide_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer); ulong ide_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer); +#ifdef CONFIG_IDE_PREINIT +int ide_preinit(void); +#endif + +#ifdef CONFIG_IDE_INIT_POSTRESET +int ide_init_postreset(void); +#endif + #if defined(CONFIG_OF_IDE_FIXUP) int ide_device_present(int dev); #endif @@ -64,4 +75,14 @@ void ide_write_register(int dev, unsigned int port, unsigned char val); void ide_read_data(int dev, ulong *sect_buf, int words); void ide_write_data(int dev, ulong *sect_buf, int words); #endif + +/* + * I/O function overrides + */ +void ide_input_swap_data(int dev, ulong *sect_buf, int words); +void ide_input_data(int dev, ulong *sect_buf, int words); +void ide_output_data(int dev, const ulong *sect_buf, int words); +void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts); +void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts); + #endif /* _IDE_H */ diff --git a/include/image.h b/include/image.h index e5f6649291..0a895f2044 100644 --- a/include/image.h +++ b/include/image.h @@ -34,6 +34,7 @@ #define __IMAGE_H__ #include "compiler.h" +#include <asm/byteorder.h> #ifdef USE_HOSTCC @@ -183,13 +184,13 @@ * all data in network byte order (aka natural aka bigendian). */ typedef struct image_header { - uint32_t ih_magic; /* Image Header Magic Number */ - uint32_t ih_hcrc; /* Image Header CRC Checksum */ - uint32_t ih_time; /* Image Creation Timestamp */ - uint32_t ih_size; /* Image Data Size */ - uint32_t ih_load; /* Data Load Address */ - uint32_t ih_ep; /* Entry Point Address */ - uint32_t ih_dcrc; /* Image Data CRC Checksum */ + __be32 ih_magic; /* Image Header Magic Number */ + __be32 ih_hcrc; /* Image Header CRC Checksum */ + __be32 ih_time; /* Image Creation Timestamp */ + __be32 ih_size; /* Image Data Size */ + __be32 ih_load; /* Data Load Address */ + __be32 ih_ep; /* Entry Point Address */ + __be32 ih_dcrc; /* Image Data CRC Checksum */ uint8_t ih_os; /* Operating System */ uint8_t ih_arch; /* CPU architecture */ uint8_t ih_type; /* Image Type */ @@ -511,6 +512,7 @@ static inline int image_check_target_arch(const image_header_t *hdr) #define FIT_HASH_NODENAME "hash" #define FIT_ALGO_PROP "algo" #define FIT_VALUE_PROP "value" +#define FIT_IGNORE_PROP "uboot-ignore" /* image node */ #define FIT_DATA_PROP "data" @@ -595,6 +597,9 @@ int fit_image_get_data(const void *fit, int noffset, int fit_image_hash_get_algo(const void *fit, int noffset, char **algo); int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, int *value_len); +#ifndef USE_HOSTCC +int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore); +#endif int fit_set_timestamp(void *fit, int noffset, time_t timestamp); int fit_set_hashes(void *fit); diff --git a/include/input.h b/include/input.h index 0f4acb27f8..e90bb0ba9c 100644 --- a/include/input.h +++ b/include/input.h @@ -84,6 +84,8 @@ struct stdio_dev; * @param config Input state * @param keycode List of key codes to examine * @param num_keycodes Number of key codes + * @return number of ascii characters sent, or 0 if none, or -1 for an + * internal error */ int input_send_keycodes(struct input_config *config, int keycode[], int count); diff --git a/include/lh7a400.h b/include/lh7a400.h deleted file mode 100644 index d1e70a228b..0000000000 --- a/include/lh7a400.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * lh7a400 SoC interface - */ - -#ifndef __LH7A400_H__ -#define __LH7A400_H__ - -#include "lh7a40x.h" - -/* Interrupt Controller (userguide 8.2.1) */ -typedef struct { - volatile u32 intsr; - volatile u32 intrsr; - volatile u32 intens; - volatile u32 intenc; - volatile u32 rsvd1; - volatile u32 rsvd2; - volatile u32 rsvd3; -} /*__attribute__((__packed__))*/ lh7a400_interrupt_t; -#define LH7A400_INTERRUPT_BASE (0x80000500) -#define LH7A400_INTERRUPT_PTR ((lh7a400_interrupt_t*) LH7A400_INTERRUPT_BASE) - -/* (DMA) Direct Memory Access Controller (userguide 9.2.1) */ -typedef struct { - lh7a40x_dmachan_t chan[15]; - volatile u32 glblint; - volatile u32 rsvd1; - volatile u32 rsvd2; - volatile u32 rsvd3; -} /*__attribute__((__packed__))*/ lh7a400_dma_t; - -#define LH7A400_DMA_BASE (0x80002800) -#define DMA_USBTX_OFFSET (0x000) -#define DMA_USBRX_OFFSET (0x040) -#define DMA_MMCTX_OFFSET (0x080) -#define DMA_MMCRX_OFFSET (0x0C0) -#define DMA_AC97_BASE (0x80002A00) - -#define LH7A400_DMA_PTR ((lh7a400_dma_t*) LH7A400_DMA_BASE) -#define LH7A400_DMA_USBTX \ - ((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_USBTX_OFFSET)) -#define LH7A400_DMA_USBRX \ - ((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_USBRX_OFFSET)) -#define LH7A400_DMA_MMCTX \ - ((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_MMCTX_OFFSET)) -#define LH7A400_DMA_MMCRX \ - ((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_MMCRX_OFFSET)) -#define LH7A400_AC97RX(n) \ - ((lh7a400_dmachan_t*) (LH7A400_AC97_BASE + \ - ((2*n) * sizeof(lh7a400_dmachan_t)))) -#define LH7A400_AC97TX(n) \ - ((lh7a400_dmachan_t*) (LH7A400_AC97_BASE + \ - (((2*n)+1) * sizeof(lh7a400_dmachan_t)))) - -#endif /* __LH7A400_H__ */ diff --git a/include/lh7a404.h b/include/lh7a404.h deleted file mode 100644 index 4098af34a8..0000000000 --- a/include/lh7a404.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * lh7a404 SoC interface - */ - -#ifndef __LH7A404_H__ -#define __LH7A404_H__ - -#include "lh7a40x.h" - -/* Interrupt Controller (userguide 8.2.1) */ -typedef struct { - volatile u32 irqstatus; - volatile u32 fiqstatus; - volatile u32 rawintr; - volatile u32 intsel; - volatile u32 inten; - volatile u32 intenclr; - volatile u32 softint; - volatile u32 softintclr; - volatile u32 protect; - volatile u32 unused1; - volatile u32 unused2; - volatile u32 vectaddr; - volatile u32 nvaddr; - volatile u32 unused3[32]; - volatile u32 vad[16]; - volatile u32 unused4[44]; - volatile u32 vectcntl[16]; - volatile u32 unused5[44]; - volatile u32 itcr; - volatile u32 itip1; - volatile u32 itip2; - volatile u32 itop1; - volatile u32 itop2; - volatile u32 unused6[333]; - volatile u32 periphid[4]; - volatile u32 pcellid[4]; -} /*__attribute__((__packed__))*/ lh7a404_vic_t; -#define LH7A404_VIC_BASE (0x80008000) -#define LH7A400_VIC_PTR(x) ((lh7a404_vic_t*)(LH7A400_VIC_BASE + (x*0x2000))) - - -typedef struct { - lh7a40x_dmachan_t m2p0_tx; - lh7a40x_dmachan_t m2p1_rx; - lh7a40x_dmachan_t m2p2_tx; - lh7a40x_dmachan_t m2p3_rx; - lh7a40x_dmachan_t m2m0; - lh7a40x_dmachan_t m2m1; - lh7a40x_dmachan_t unused1; - lh7a40x_dmachan_t unused2; - lh7a40x_dmachan_t m2p5_rx; - lh7a40x_dmachan_t m2p4_tx; - lh7a40x_dmachan_t m2p7_rx; - lh7a40x_dmachan_t m2p6_tx; - lh7a40x_dmachan_t m2p9_rx; - lh7a40x_dmachan_t m2p8_tx; - volatile u32 chanarb; - volatile u32 glblint; -} /*__attribute__((__packed__))*/ lh7a400_dma_t; - - -#endif /* __LH7A404_H__ */ diff --git a/include/lh7a40x.h b/include/lh7a40x.h deleted file mode 100644 index 09a463c841..0000000000 --- a/include/lh7a40x.h +++ /dev/null @@ -1,279 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * lh7a40x SoC series common interface - */ - -#ifndef __LH7A40X_H__ -#define __LH7A40X_H__ - -/* (SMC) Static Memory Controller (usersguide 4.2.1) */ -typedef struct { - volatile u32 attib; - volatile u32 com; - volatile u32 io; - volatile u32 rsvd1; -} /*__attribute__((__packed__))*/ lh7a40x_pccard_t; - -typedef struct { - volatile u32 bcr[8]; - lh7a40x_pccard_t pccard[2]; - volatile u32 pcmciacon; -} /*__attribute__((__packed__))*/ lh7a40x_smc_t; -#define LH7A40X_SMC_BASE (0x80002000) -#define LH7A40X_SMC_PTR ((lh7a40x_smc_t*) LH7A40X_SMC_BASE) - -/* (SDMC) Synchronous Dynamic Ram Controller (usersguide 5.3.1) */ -typedef struct { - volatile u32 rsvd1; - volatile u32 gblcnfg; - volatile u32 rfshtmr; - volatile u32 bootstat; - volatile u32 sdcsc[4]; -} /*__attribute__((__packed__))*/ lh7a40x_sdmc_t; -#define LH7A40X_SDMC_BASE (0x80002400) -#define LH7A40X_SDMC_PTR ((lh7a40x_sdmc_t*) LH7A40X_SDMC_BASE) - -/* (CSC) Clock and State Controller (userguide 6.2.1) */ -typedef struct { - volatile u32 pwrsr; - volatile u32 pwrcnt; - volatile u32 halt; - volatile u32 stby; - volatile u32 bleoi; - volatile u32 mceoi; - volatile u32 teoi; - volatile u32 stfclr; - volatile u32 clkset; - volatile u32 scrreg[2]; - volatile u32 rsvd1; - volatile u32 usbreset; -} /*__attribute__((__packed__))*/ lh7a40x_csc_t; -#define LH7A40X_STPWR_BASE (0x80000400) -#define LH7A40X_CSC_PTR ((lh7a40x_csc_t*) LH7A40X_STPWR_BASE) - -#define CLKSET_SMCROM (0x01000000) -#define CLKSET_PS (0x000C0000) -#define CLKSET_PS_0 (0x00000000) -#define CLKSET_PS_1 (0x00040000) -#define CLKSET_PS_2 (0x00080000) -#define CLKSET_PS_3 (0x000C0000) -#define CLKSET_PCLKDIV (0x00030000) -#define CLKSET_PCLKDIV_2 (0x00000000) -#define CLKSET_PCLKDIV_4 (0x00010000) -#define CLKSET_PCLKDIV_8 (0x00020000) -#define CLKSET_MAINDIV2 (0x0000f800) -#define CLKSET_MAINDIV1 (0x00000780) -#define CLKSET_PREDIV (0x0000007C) -#define CLKSET_HCLKDIV (0x00000003) - -/* (DMA) Direct Memory Access Controller (userguide 9.2.1) */ -typedef struct { - volatile u32 maxcnt; - volatile u32 base; - volatile u32 current; - volatile u32 rsvd1; -} lh7a40x_dmabuf_t; - -typedef struct { - volatile u32 control; - volatile u32 interrupt; - volatile u32 rsvd1; - volatile u32 status; - volatile u32 rsvd2; - volatile u32 remain; - volatile u32 rsvd3; - volatile u32 rsvd4; - lh7a40x_dmabuf_t buf[2]; -} /*__attribute__((__packed__))*/ lh7a40x_dmachan_t; - - -/* (WDT) Watchdog Timer (userguide 11.2.1) */ -typedef struct { - volatile u32 ctl; - volatile u32 rst; - volatile u32 status; - volatile u32 count[4]; -} /*__attribute__((__packed__))*/ lh7a40x_wdt_t; -#define LH7A40X_WDT_BASE (0x80001400) -#define LH7A40X_WDT_PTR ((lh7a40x_wdt_t*) LH7A40X_WDT_BASE) - -/* (RTC) Real Time Clock (lh7a400 userguide 12.2.1, lh7a404 userguide 13.2.1) */ -typedef struct { - volatile u32 rtcdr; - volatile u32 rtclr; - volatile u32 rtcmr; - volatile u32 unk1; - volatile u32 rtcstat_eoi; - volatile u32 rtccr; - volatile u32 rsvd1[58]; -} /*__attribute__((__packed__))*/ lh7a40x_rtc_t; -#define LH7A40X_RTC_BASE (0x80000D00) -#define LH7A40X_RTC_PTR ((lh7a40x_rtc_t*) LH7A40X_RTC_BASE) - -/* Timers (lh7a400 userguide 13.2.1, lh7a404 userguide 11.2.1) */ -typedef struct { - volatile u32 load; - volatile u32 value; - volatile u32 control; - volatile u32 tceoi; -} /*__attribute__((__packed__))*/ lh7a40x_timer_t; - -typedef struct { - lh7a40x_timer_t timer1; - volatile u32 rsvd1[4]; - lh7a40x_timer_t timer2; - volatile u32 unk1[4]; - volatile u32 bzcon; - volatile u32 unk2[15]; - lh7a40x_timer_t timer3; - /*volatile u32 rsvd2;*/ -} /*__attribute__((__packed__))*/ lh7a40x_timers_t; -#define LH7A40X_TIMERS_BASE (0x80000C00) -#define LH7A40X_TIMERS_PTR ((lh7a40x_timers_t*) LH7A40X_TIMERS_BASE) - -#define TIMER_EN (0x00000080) -#define TIMER_PER (0x00000040) -#define TIMER_FREE (0x00000000) -#define TIMER_CLK508K (0x00000008) -#define TIMER_CLK2K (0x00000000) - -/* (SSP) Sychronous Serial Ports (lh7a400 userguide 14.2.1, lh7a404 userguide 14.2.1) */ -typedef struct { - volatile u32 cr0; - volatile u32 cr1; - volatile u32 irr_roeoi; - volatile u32 dr; - volatile u32 cpr; - volatile u32 sr; - /*volatile u32 rsvd1[58];*/ -} /*__attribute__((__packed__))*/ lh7a40x_ssp_t; -#define LH7A40X_SSP_BASE (0x80000B00) -#define LH7A40X_SSP_PTR ((lh7a40x_ssp_t*) LH7A40X_SSP_BASE) - -/* (UART) Universal Asychronous Receiver/Transmitter (lh7a400 userguide 15.2.1, lh7a404 userguide 15.2.1) */ -typedef struct { - volatile u32 data; - volatile u32 fcon; - volatile u32 brcon; - volatile u32 con; - volatile u32 status; - volatile u32 rawisr; - volatile u32 inten; - volatile u32 isr; - volatile u32 rsvd1[56]; -} /*__attribute__((__packed__))*/ lh7a40x_uart_t; -#define LH7A40X_UART_BASE (0x80000600) -#define LH7A40X_UART_PTR(n) \ - ((lh7a40x_uart_t*) (LH7A40X_UART_BASE + ((n-1) * sizeof(lh7a40x_uart_t)))) - -#define UART_BE (0x00000800) /* the rx error bits */ -#define UART_OE (0x00000400) -#define UART_PE (0x00000200) -#define UART_FE (0x00000100) - -#define UART_WLEN (0x00000060) /* fcon bits */ -#define UART_WLEN_8 (0x00000060) -#define UART_WLEN_7 (0x00000040) -#define UART_WLEN_6 (0x00000020) -#define UART_WLEN_5 (0x00000000) -#define UART_FEN (0x00000010) -#define UART_STP2 (0x00000008) -#define UART_STP2_2 (0x00000008) -#define UART_STP2_1 (0x00000000) -#define UART_EPS (0x00000004) -#define UART_EPS_EVEN (0x00000004) -#define UART_EPS_ODD (0x00000000) -#define UART_PEN (0x00000002) -#define UART_BRK (0x00000001) - -#define UART_BAUDDIV (0x0000ffff) /* brcon bits */ - -#define UART_SIRBD (0x00000080) /* con bits */ -#define UART_LBE (0x00000040) -#define UART_MXP (0x00000020) -#define UART_TXP (0x00000010) -#define UART_RXP (0x00000008) -#define UART_SIRLP (0x00000004) -#define UART_SIRD (0x00000002) -#define UART_EN (0x00000001) - -#define UART_TXFE (0x00000080) /* status bits */ -#define UART_RXFF (0x00000040) -#define UART_TXFF (0x00000020) -#define UART_RXFE (0x00000010) -#define UART_BUSY (0x00000008) -#define UART_DCD (0x00000004) -#define UART_DSR (0x00000002) -#define UART_CTS (0x00000001) - -#define UART_MSEOI (0xfffffff0) /* rawisr interrupt bits */ - -#define UART_RTI (0x00000008) /* generic interrupt bits */ -#define UART_MI (0x00000004) -#define UART_TI (0x00000002) -#define UART_RI (0x00000001) - -/* (GPIO) General Purpose IO and External Interrupts (userguide 16.2.1) */ -typedef struct { - volatile u32 pad; - volatile u32 pbd; - volatile u32 pcd; - volatile u32 pdd; - volatile u32 padd; - volatile u32 pbdd; - volatile u32 pcdd; - volatile u32 pddd; - volatile u32 ped; - volatile u32 pedd; - volatile u32 kbdctl; - volatile u32 pinmux; - volatile u32 pfd; - volatile u32 pfdd; - volatile u32 pgd; - volatile u32 pgdd; - volatile u32 phd; - volatile u32 phdd; - volatile u32 rsvd1; - volatile u32 inttype1; - volatile u32 inttype2; - volatile u32 gpiofeoi; - volatile u32 gpiointen; - volatile u32 intstatus; - volatile u32 rawintstatus; - volatile u32 gpiodb; - volatile u32 papd; - volatile u32 pbpd; - volatile u32 pcpd; - volatile u32 pdpd; - volatile u32 pepd; - volatile u32 pfpd; - volatile u32 pgpd; - volatile u32 phpd; -} /*__attribute__((__packed__))*/ lh7a40x_gpioint_t; -#define LH7A40X_GPIOINT_BASE (0x80000E00) -#define LH7A40X_GPIOINT_PTR ((lh7a40x_gpioint_t*) LH7A40X_GPIOINT_BASE) - -/* Embedded SRAM */ -#define CONFIG_SYS_SRAM_BASE (0xB0000000) -#define CONFIG_SYS_SRAM_SIZE (80*1024) /* 80kB */ - -#endif /* __LH7A40X_H__ */ diff --git a/include/libfdt.h b/include/libfdt.h index de82ed5ffd..c93ae28833 100644 --- a/include/libfdt.h +++ b/include/libfdt.h @@ -852,17 +852,17 @@ int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, const void *val, int len); /** - * fdt_setprop_inplace_cell - change the value of a single-cell property + * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property * @fdt: pointer to the device tree blob * @nodeoffset: offset of the node whose property to change * @name: name of the property to change - * @val: cell (32-bit integer) value to replace the property with + * @val: 32-bit integer value to replace the property with * - * fdt_setprop_inplace_cell() replaces the value of a given property - * with the 32-bit integer cell value in val, converting val to - * big-endian if necessary. This function cannot change the size of a - * property, and so will only work if the property already exists and - * has length 4. + * fdt_setprop_inplace_u32() replaces the value of a given property + * with the 32-bit integer value in val, converting val to big-endian + * if necessary. This function cannot change the size of a property, + * and so will only work if the property already exists and has length + * 4. * * This function will alter only the bytes in the blob which contain * the given property value, and will not alter or move any other part @@ -871,7 +871,7 @@ int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, * returns: * 0, on success * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 - * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_NOTFOUND, node does not have the named property * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag * -FDT_ERR_BADMAGIC, * -FDT_ERR_BADVERSION, @@ -879,14 +879,60 @@ int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, * -FDT_ERR_BADSTRUCTURE, * -FDT_ERR_TRUNCATED, standard meanings */ -static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, - const char *name, uint32_t val) +static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset, + const char *name, uint32_t val) { val = cpu_to_fdt32(val); return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val)); } /** + * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value to replace the property with + * + * fdt_setprop_inplace_u64() replaces the value of a given property + * with the 64-bit integer value in val, converting val to big-endian + * if necessary. This function cannot change the size of a property, + * and so will only work if the property already exists and has length + * 8. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if the property's length is not equal to 8 + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset, + const char *name, uint64_t val) +{ + val = cpu_to_fdt64(val); + return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val)); +} + +/** + * fdt_setprop_inplace_cell - change the value of a single-cell property + * + * This is an alternative name for fdt_setprop_inplace_u32() + */ +static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val); +} + +/** * fdt_nop_property - replace a property with nop tags * @fdt: pointer to the device tree blob * @nodeoffset: offset of the node whose property to nop @@ -945,11 +991,20 @@ int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); int fdt_finish_reservemap(void *fdt); int fdt_begin_node(void *fdt, const char *name); int fdt_property(void *fdt, const char *name, const void *val, int len); -static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) +static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val) { val = cpu_to_fdt32(val); return fdt_property(fdt, name, &val, sizeof(val)); } +static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val) +{ + val = cpu_to_fdt64(val); + return fdt_property(fdt, name, &val, sizeof(val)); +} +static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) +{ + return fdt_property_u32(fdt, name, val); +} #define fdt_property_string(fdt, name, str) \ fdt_property(fdt, name, str, strlen(str)+1) int fdt_end_node(void *fdt); @@ -959,6 +1014,7 @@ int fdt_finish(void *fdt); /* Read-write functions */ /**********************************************************************/ +int fdt_create_empty_tree(void *buf, int bufsize); int fdt_open_into(const void *fdt, void *buf, int bufsize); int fdt_pack(void *fdt); @@ -1068,14 +1124,14 @@ int fdt_setprop(void *fdt, int nodeoffset, const char *name, const void *val, int len); /** - * fdt_setprop_cell - set a property to a single cell value + * fdt_setprop_u32 - set a property to a 32-bit integer * @fdt: pointer to the device tree blob * @nodeoffset: offset of the node whose property to change * @name: name of the property to change * @val: 32-bit integer value for the property (native endian) * - * fdt_setprop_cell() sets the value of the named property in the - * given node to the given cell value (converting to big-endian if + * fdt_setprop_u32() sets the value of the named property in the given + * node to the given 32-bit integer value (converting to big-endian if * necessary), or creates a new property with that value if it does * not already exist. * @@ -1095,14 +1151,60 @@ int fdt_setprop(void *fdt, int nodeoffset, const char *name, * -FDT_ERR_BADLAYOUT, * -FDT_ERR_TRUNCATED, standard meanings */ -static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, - uint32_t val) +static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name, + uint32_t val) { val = cpu_to_fdt32(val); return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val)); } /** + * fdt_setprop_u64 - set a property to a 64-bit integer + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value for the property (native endian) + * + * fdt_setprop_u64() sets the value of the named property in the given + * node to the given 64-bit integer value (converting to big-endian if + * necessary), or creates a new property with that value if it does + * not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name, + uint64_t val) +{ + val = cpu_to_fdt64(val); + return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val)); +} + +/** + * fdt_setprop_cell - set a property to a single cell value + * + * This is an alternative name for fdt_setprop_u32() + */ +static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, + uint32_t val) +{ + return fdt_setprop_u32(fdt, nodeoffset, name, val); +} + +/** * fdt_setprop_string - set a property to a string value * @fdt: pointer to the device tree blob * @nodeoffset: offset of the node whose property to change @@ -1134,6 +1236,147 @@ static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) /** + * fdt_appendprop - append to or create a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to append to + * @val: pointer to data to append to the property value + * @len: length of the data to append to the property value + * + * fdt_appendprop() appends the value to the named property in the + * given node, creating the property if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_appendprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_appendprop_u32 - append a 32-bit integer value to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value to append to the property (native endian) + * + * fdt_appendprop_u32() appends the given 32-bit integer value + * (converting to big-endian if necessary) to the value of the named + * property in the given node, or creates a new property with that + * value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_appendprop_u32(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + val = cpu_to_fdt32(val); + return fdt_appendprop(fdt, nodeoffset, name, &val, sizeof(val)); +} + +/** + * fdt_appendprop_u64 - append a 64-bit integer value to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value to append to the property (native endian) + * + * fdt_appendprop_u64() appends the given 64-bit integer value + * (converting to big-endian if necessary) to the value of the named + * property in the given node, or creates a new property with that + * value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_appendprop_u64(void *fdt, int nodeoffset, + const char *name, uint64_t val) +{ + val = cpu_to_fdt64(val); + return fdt_appendprop(fdt, nodeoffset, name, &val, sizeof(val)); +} + +/** + * fdt_appendprop_cell - append a single cell value to a property + * + * This is an alternative name for fdt_appendprop_u32() + */ +static inline int fdt_appendprop_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + return fdt_appendprop_u32(fdt, nodeoffset, name, val); +} + +/** + * fdt_appendprop_string - append a string to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @str: string value to append to the property + * + * fdt_appendprop_string() appends the given string to the value of + * the named property in the given node, or creates a new property + * with that value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#define fdt_appendprop_string(fdt, nodeoffset, name, str) \ + fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) + +/** * fdt_delprop - delete a property * @fdt: pointer to the device tree blob * @nodeoffset: offset of the node whose property to nop diff --git a/include/linker_lists.h b/include/linker_lists.h new file mode 100644 index 0000000000..0b405d78ea --- /dev/null +++ b/include/linker_lists.h @@ -0,0 +1,148 @@ +/* + * include/linker_lists.h + * + * Implementation of linker-generated arrays + * + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ +#ifndef __LINKER_LISTS_H__ +#define __LINKER_LISTS_H__ + +/** + * ll_entry_declare() - Declare linker-generated array entry + * @_type: Data type of the entry + * @_name: Name of the entry + * @_section_u: Subsection of u_boot_list in which this entry is placed + * (with underscores instead of dots, for name concatenation) + * @_section_d: Subsection of u_boot_list in which this entry is placed + * (with dots, for section concatenation) + * + * This macro declares a variable that is placed into a linker-generated + * array. This is a basic building block for more advanced use of linker- + * generated arrays. The user is expected to build their own macro wrapper + * around this one. + * + * A variable declared using this macro must be compile-time initialized + * and is as such placed into subsection of special section, .u_boot_list. + * The subsection is specified by the _section_[u,d] parameter, see below. + * The base name of the variable is _name, yet the actual variable is + * declared as concatenation of + * + * %_u_boot_list_ + @_section_u + _ + @_name + * + * which ensures name uniqueness. This variable shall never be refered + * directly though. + * + * Special precaution must be made when using this macro: + * 1) The _type must not contain the "static" keyword, otherwise the entry + * is not generated. + * + * 2) The @_section_u and @_section_d variables must match, the only difference + * is that in @_section_u is every dot "." character present in @_section_d + * replaced by a single underscore "_" character in @_section_u. The actual + * purpose of these parameters is to select proper subsection in the global + * .u_boot_list section. + * + * 3) In case a section is declared that contains some array elements AND a + * subsection of this section is declared and contains some elements, it is + * imperative that the elements are of the same type. + * + * 4) In case an outer section is declared that contains some array elements + * AND am inner subsection of this section is declared and contains some + * elements, then when traversing the outer section, even the elements of + * the inner sections are present in the array. + * + * Example: + * ll_entry_declare(struct my_sub_cmd, my_sub_cmd, cmd_sub, cmd.sub) = { + * .x = 3, + * .y = 4, + * }; + */ +#define ll_entry_declare(_type, _name, _section_u, _section_d) \ + _type _u_boot_list_##_section_u##_##_name __attribute__(( \ + unused, aligned(4), \ + section(".u_boot_list."#_section_d"."#_name))) + +/** + * ll_entry_start() - Point to first entry of linker-generated array + * @_type: Data type of the entry + * @_section_u: Subsection of u_boot_list in which this entry is placed + * (with underscores instead of dots) + * + * This function returns (_type *) pointer to the very first entry of a + * linker-generated array placed into subsection of .u_boot_list section + * specified by _section_u argument. + * + * Example: + * struct my_sub_cmd *msc = ll_entry_start(struct my_sub_cmd, cmd_sub); + */ +#define ll_entry_start(_type, _section_u) \ + ({ \ + extern _type _u_boot_list_##_section_u##__start; \ + _type *_ll_result = &_u_boot_list_##_section_u##__start;\ + _ll_result; \ + }) + +/** + * ll_entry_count() - Return the number of elements in linker-generated array + * @_type: Data type of the entry + * @_section_u: Subsection of u_boot_list in which this entry is placed + * (with underscores instead of dots) + * + * This function returns the number of elements of a linker-generated array + * placed into subsection of .u_boot_list section specified by _section_u + * argument. The result is of an unsigned int type. + * + * Example: + * int i; + * const unsigned int count = ll_entry_count(struct my_sub_cmd, cmd_sub); + * struct my_sub_cmd *msc = ll_entry_start(struct my_sub_cmd, cmd_sub); + * for (i = 0; i < count; i++, msc++) + * printf("Entry %i, x=%i y=%i\n", i, msc->x, msc->y); + */ +#define ll_entry_count(_type, _section_u) \ + ({ \ + extern _type _u_boot_list_##_section_u##__start; \ + extern _type _u_boot_list_##_section_u##__end; \ + unsigned int _ll_result = \ + &_u_boot_list_##_section_u##__end - \ + &_u_boot_list_##_section_u##__start; \ + _ll_result; \ + }) + + +/** + * ll_entry_get() - Retrieve entry from linker-generated array by name + * @_type: Data type of the entry + * @_name: Name of the entry + * @_section_u: Subsection of u_boot_list in which this entry is placed + * (with underscores instead of dots) + * + * This function returns a pointer to a particular entry in LG-array + * identified by the subsection of u_boot_list where the entry resides + * and it's name. + * + * Example: + * ll_entry_declare(struct my_sub_cmd, my_sub_cmd, cmd_sub, cmd.sub) = { + * .x = 3, + * .y = 4, + * }; + * ... + * struct my_sub_cmd *c = ll_entry_get(struct my_sub_cmd, my_sub_cmd, cmd_sub); + */ +#define ll_entry_get(_type, _name, _section_u) \ + ({ \ + extern _type _u_boot_list_##_section_u##_##_name; \ + _type *_ll_result = &_u_boot_list_##_section_u##_##_name;\ + _ll_result; \ + }) + +#endif /* __LINKER_LISTS_H__ */ diff --git a/include/linux/byteorder/big_endian.h b/include/linux/byteorder/big_endian.h index 19b0c86e43..aaf77577c4 100644 --- a/include/linux/byteorder/big_endian.h +++ b/include/linux/byteorder/big_endian.h @@ -7,63 +7,104 @@ #ifndef __BIG_ENDIAN_BITFIELD #define __BIG_ENDIAN_BITFIELD #endif -#define __BYTE_ORDER __BIG_ENDIAN +#define __BYTE_ORDER __BIG_ENDIAN +#include <linux/compiler.h> +#include <linux/types.h> #include <linux/byteorder/swab.h> -#define __constant_htonl(x) ((__u32)(x)) -#define __constant_ntohl(x) ((__u32)(x)) -#define __constant_htons(x) ((__u16)(x)) -#define __constant_ntohs(x) ((__u16)(x)) -#define __constant_cpu_to_le64(x) ___swab64((x)) -#define __constant_le64_to_cpu(x) ___swab64((x)) -#define __constant_cpu_to_le32(x) ___swab32((x)) -#define __constant_le32_to_cpu(x) ___swab32((x)) -#define __constant_cpu_to_le16(x) ___swab16((x)) -#define __constant_le16_to_cpu(x) ___swab16((x)) -#define __constant_cpu_to_be64(x) ((__u64)(x)) -#define __constant_be64_to_cpu(x) ((__u64)(x)) -#define __constant_cpu_to_be32(x) ((__u32)(x)) -#define __constant_be32_to_cpu(x) ((__u32)(x)) -#define __constant_cpu_to_be16(x) ((__u16)(x)) -#define __constant_be16_to_cpu(x) ((__u16)(x)) -#define __cpu_to_le64(x) __swab64((x)) -#define __le64_to_cpu(x) __swab64((x)) -#define __cpu_to_le32(x) __swab32((x)) -#define __le32_to_cpu(x) __swab32((x)) -#define __cpu_to_le16(x) __swab16((x)) -#define __le16_to_cpu(x) __swab16((x)) -#define __cpu_to_be64(x) ((__u64)(x)) -#define __be64_to_cpu(x) ((__u64)(x)) -#define __cpu_to_be32(x) ((__u32)(x)) -#define __be32_to_cpu(x) ((__u32)(x)) -#define __cpu_to_be16(x) ((__u16)(x)) -#define __be16_to_cpu(x) ((__u16)(x)) -#define __cpu_to_le64p(x) __swab64p((x)) -#define __le64_to_cpup(x) __swab64p((x)) -#define __cpu_to_le32p(x) __swab32p((x)) -#define __le32_to_cpup(x) __swab32p((x)) -#define __cpu_to_le16p(x) __swab16p((x)) -#define __le16_to_cpup(x) __swab16p((x)) -#define __cpu_to_be64p(x) (*(__u64*)(x)) -#define __be64_to_cpup(x) (*(__u64*)(x)) -#define __cpu_to_be32p(x) (*(__u32*)(x)) -#define __be32_to_cpup(x) (*(__u32*)(x)) -#define __cpu_to_be16p(x) (*(__u16*)(x)) -#define __be16_to_cpup(x) (*(__u16*)(x)) +#define __constant_htonl(x) ((__force __be32)(__u32)(x)) +#define __constant_ntohl(x) ((__force __u32)(__be32)(x)) +#define __constant_htons(x) ((__force __be16)(__u16)(x)) +#define __constant_ntohs(x) ((__force __u16)(__be16)(x)) +#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x))) +#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x)) +#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x))) +#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x)) +#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x))) +#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x)) +#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x)) +#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x)) +#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x)) +#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x)) +#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x)) +#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x)) +#define __cpu_to_le64(x) ((__force __le64)__swab64((x))) +#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x)) +#define __cpu_to_le32(x) ((__force __le32)__swab32((x))) +#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x)) +#define __cpu_to_le16(x) ((__force __le16)__swab16((x))) +#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x)) +#define __cpu_to_be64(x) ((__force __be64)(__u64)(x)) +#define __be64_to_cpu(x) ((__force __u64)(__be64)(x)) +#define __cpu_to_be32(x) ((__force __be32)(__u32)(x)) +#define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) +#define __cpu_to_be16(x) ((__force __be16)(__u16)(x)) +#define __be16_to_cpu(x) ((__force __u16)(__be16)(x)) + +static inline __le64 __cpu_to_le64p(const __u64 *p) +{ + return (__force __le64)__swab64p(p); +} +static inline __u64 __le64_to_cpup(const __le64 *p) +{ + return __swab64p((__u64 *)p); +} +static inline __le32 __cpu_to_le32p(const __u32 *p) +{ + return (__force __le32)__swab32p(p); +} +static inline __u32 __le32_to_cpup(const __le32 *p) +{ + return __swab32p((__u32 *)p); +} +static inline __le16 __cpu_to_le16p(const __u16 *p) +{ + return (__force __le16)__swab16p(p); +} +static inline __u16 __le16_to_cpup(const __le16 *p) +{ + return __swab16p((__u16 *)p); +} +static inline __be64 __cpu_to_be64p(const __u64 *p) +{ + return (__force __be64)*p; +} +static inline __u64 __be64_to_cpup(const __be64 *p) +{ + return (__force __u64)*p; +} +static inline __be32 __cpu_to_be32p(const __u32 *p) +{ + return (__force __be32)*p; +} +static inline __u32 __be32_to_cpup(const __be32 *p) +{ + return (__force __u32)*p; +} +static inline __be16 __cpu_to_be16p(const __u16 *p) +{ + return (__force __be16)*p; +} +static inline __u16 __be16_to_cpup(const __be16 *p) +{ + return (__force __u16)*p; +} #define __cpu_to_le64s(x) __swab64s((x)) #define __le64_to_cpus(x) __swab64s((x)) #define __cpu_to_le32s(x) __swab32s((x)) #define __le32_to_cpus(x) __swab32s((x)) #define __cpu_to_le16s(x) __swab16s((x)) #define __le16_to_cpus(x) __swab16s((x)) -#define __cpu_to_be64s(x) do {} while (0) -#define __be64_to_cpus(x) do {} while (0) -#define __cpu_to_be32s(x) do {} while (0) -#define __be32_to_cpus(x) do {} while (0) -#define __cpu_to_be16s(x) do {} while (0) -#define __be16_to_cpus(x) do {} while (0) +#define __cpu_to_be64s(x) do { (void)(x); } while (0) +#define __be64_to_cpus(x) do { (void)(x); } while (0) +#define __cpu_to_be32s(x) do { (void)(x); } while (0) +#define __be32_to_cpus(x) do { (void)(x); } while (0) +#define __cpu_to_be16s(x) do { (void)(x); } while (0) +#define __be16_to_cpus(x) do { (void)(x); } while (0) +#ifdef __KERNEL__ #include <linux/byteorder/generic.h> +#endif #endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */ diff --git a/include/linux/byteorder/little_endian.h b/include/linux/byteorder/little_endian.h index a46f3ecc12..a4cb3bfde5 100644 --- a/include/linux/byteorder/little_endian.h +++ b/include/linux/byteorder/little_endian.h @@ -9,54 +9,93 @@ #endif #define __BYTE_ORDER __LITTLE_ENDIAN +#include <linux/compiler.h> +#include <linux/types.h> #include <linux/byteorder/swab.h> -#define __constant_htonl(x) ___constant_swab32((x)) -#define __constant_ntohl(x) ___constant_swab32((x)) -#define __constant_htons(x) ___constant_swab16((x)) -#define __constant_ntohs(x) ___constant_swab16((x)) -#define __constant_cpu_to_le64(x) ((__u64)(x)) -#define __constant_le64_to_cpu(x) ((__u64)(x)) -#define __constant_cpu_to_le32(x) ((__u32)(x)) -#define __constant_le32_to_cpu(x) ((__u32)(x)) -#define __constant_cpu_to_le16(x) ((__u16)(x)) -#define __constant_le16_to_cpu(x) ((__u16)(x)) -#define __constant_cpu_to_be64(x) ___constant_swab64((x)) -#define __constant_be64_to_cpu(x) ___constant_swab64((x)) -#define __constant_cpu_to_be32(x) ___constant_swab32((x)) -#define __constant_be32_to_cpu(x) ___constant_swab32((x)) -#define __constant_cpu_to_be16(x) ___constant_swab16((x)) -#define __constant_be16_to_cpu(x) ___constant_swab16((x)) -#define __cpu_to_le64(x) ((__u64)(x)) -#define __le64_to_cpu(x) ((__u64)(x)) -#define __cpu_to_le32(x) ((__u32)(x)) -#define __le32_to_cpu(x) ((__u32)(x)) -#define __cpu_to_le16(x) ((__u16)(x)) -#define __le16_to_cpu(x) ((__u16)(x)) -#define __cpu_to_be64(x) __swab64((x)) -#define __be64_to_cpu(x) __swab64((x)) -#define __cpu_to_be32(x) __swab32((x)) -#define __be32_to_cpu(x) __swab32((x)) -#define __cpu_to_be16(x) __swab16((x)) -#define __be16_to_cpu(x) __swab16((x)) -#define __cpu_to_le64p(x) (*(__u64*)(x)) -#define __le64_to_cpup(x) (*(__u64*)(x)) -#define __cpu_to_le32p(x) (*(__u32*)(x)) -#define __le32_to_cpup(x) (*(__u32*)(x)) -#define __cpu_to_le16p(x) (*(__u16*)(x)) -#define __le16_to_cpup(x) (*(__u16*)(x)) -#define __cpu_to_be64p(x) __swab64p((x)) -#define __be64_to_cpup(x) __swab64p((x)) -#define __cpu_to_be32p(x) __swab32p((x)) -#define __be32_to_cpup(x) __swab32p((x)) -#define __cpu_to_be16p(x) __swab16p((x)) -#define __be16_to_cpup(x) __swab16p((x)) -#define __cpu_to_le64s(x) do {} while (0) -#define __le64_to_cpus(x) do {} while (0) -#define __cpu_to_le32s(x) do {} while (0) -#define __le32_to_cpus(x) do {} while (0) -#define __cpu_to_le16s(x) do {} while (0) -#define __le16_to_cpus(x) do {} while (0) +#define __constant_htonl(x) ((__force __be32)___constant_swab32((x))) +#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x)) +#define __constant_htons(x) ((__force __be16)___constant_swab16((x))) +#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x)) +#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x)) +#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x)) +#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x)) +#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x)) +#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x)) +#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x)) +#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x))) +#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x)) +#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x))) +#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x)) +#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x))) +#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x)) +#define __cpu_to_le64(x) ((__force __le64)(__u64)(x)) +#define __le64_to_cpu(x) ((__force __u64)(__le64)(x)) +#define __cpu_to_le32(x) ((__force __le32)(__u32)(x)) +#define __le32_to_cpu(x) ((__force __u32)(__le32)(x)) +#define __cpu_to_le16(x) ((__force __le16)(__u16)(x)) +#define __le16_to_cpu(x) ((__force __u16)(__le16)(x)) +#define __cpu_to_be64(x) ((__force __be64)__swab64((x))) +#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x)) +#define __cpu_to_be32(x) ((__force __be32)__swab32((x))) +#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x)) +#define __cpu_to_be16(x) ((__force __be16)__swab16((x))) +#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x)) + +static inline __le64 __cpu_to_le64p(const __u64 *p) +{ + return (__force __le64)*p; +} +static inline __u64 __le64_to_cpup(const __le64 *p) +{ + return (__force __u64)*p; +} +static inline __le32 __cpu_to_le32p(const __u32 *p) +{ + return (__force __le32)*p; +} +static inline __u32 __le32_to_cpup(const __le32 *p) +{ + return (__force __u32)*p; +} +static inline __le16 __cpu_to_le16p(const __u16 *p) +{ + return (__force __le16)*p; +} +static inline __u16 __le16_to_cpup(const __le16 *p) +{ + return (__force __u16)*p; +} +static inline __be64 __cpu_to_be64p(const __u64 *p) +{ + return (__force __be64)__swab64p(p); +} +static inline __u64 __be64_to_cpup(const __be64 *p) +{ + return __swab64p((__u64 *)p); +} +static inline __be32 __cpu_to_be32p(const __u32 *p) +{ + return (__force __be32)__swab32p(p); +} +static inline __u32 __be32_to_cpup(const __be32 *p) +{ + return __swab32p((__u32 *)p); +} +static inline __be16 __cpu_to_be16p(const __u16 *p) +{ + return (__force __be16)__swab16p(p); +} +static inline __u16 __be16_to_cpup(const __be16 *p) +{ + return __swab16p((__u16 *)p); +} +#define __cpu_to_le64s(x) do { (void)(x); } while (0) +#define __le64_to_cpus(x) do { (void)(x); } while (0) +#define __cpu_to_le32s(x) do { (void)(x); } while (0) +#define __le32_to_cpus(x) do { (void)(x); } while (0) +#define __cpu_to_le16s(x) do { (void)(x); } while (0) +#define __le16_to_cpus(x) do { (void)(x); } while (0) #define __cpu_to_be64s(x) __swab64s((x)) #define __be64_to_cpus(x) __swab64s((x)) #define __cpu_to_be32s(x) __swab32s((x)) @@ -64,6 +103,8 @@ #define __cpu_to_be16s(x) __swab16s((x)) #define __be16_to_cpus(x) __swab16s((x)) +#ifdef __KERNEL__ #include <linux/byteorder/generic.h> +#endif #endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */ diff --git a/include/linux/byteorder/swab.h b/include/linux/byteorder/swab.h index b1d570e528..bb4a046937 100644 --- a/include/linux/byteorder/swab.h +++ b/include/linux/byteorder/swab.h @@ -100,7 +100,7 @@ static __inline__ __attribute__((const)) __u16 __fswab16(__u16 x) { return __arch__swab16(x); } -static __inline__ __u16 __swab16p(__u16 *x) +static __inline__ __u16 __swab16p(const __u16 *x) { return __arch__swab16p(x); } @@ -113,7 +113,7 @@ static __inline__ __attribute__((const)) __u32 __fswab32(__u32 x) { return __arch__swab32(x); } -static __inline__ __u32 __swab32p(__u32 *x) +static __inline__ __u32 __swab32p(const __u32 *x) { return __arch__swab32p(x); } @@ -133,7 +133,7 @@ static __inline__ __attribute__((const)) __u64 __fswab64(__u64 x) return __arch__swab64(x); # endif } -static __inline__ __u64 __swab64p(__u64 *x) +static __inline__ __u64 __swab64p(const __u64 *x) { return __arch__swab64p(x); } diff --git a/include/linux/compat.h b/include/linux/compat.h index 593b07f4b5..e1338bf489 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -1,9 +1,6 @@ #ifndef _LINUX_COMPAT_H_ #define _LINUX_COMPAT_H_ -#define __user -#define __iomem - #define ndelay(x) udelay(1) #define printk printf diff --git a/include/linux/mtd/mtd-abi.h b/include/linux/mtd/mtd-abi.h index 5991157065..8bdd23112b 100644 --- a/include/linux/mtd/mtd-abi.h +++ b/include/linux/mtd/mtd-abi.h @@ -11,6 +11,8 @@ #include <linux/compat.h> #endif +#include <linux/compiler.h> + struct erase_info_user { uint32_t start; uint32_t length; diff --git a/include/linux/stddef.h b/include/linux/stddef.h index 81e34c260f..c540f6100d 100644 --- a/include/linux/stddef.h +++ b/include/linux/stddef.h @@ -12,7 +12,9 @@ #include <linux/types.h> #endif +#ifndef __CHECKER__ #undef offsetof #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) +#endif #endif diff --git a/include/linux/unaligned/generic.h b/include/linux/unaligned/generic.h index cc688e1eb1..02d97ff3df 100644 --- a/include/linux/unaligned/generic.h +++ b/include/linux/unaligned/generic.h @@ -1,9 +1,6 @@ #ifndef _LINUX_UNALIGNED_GENERIC_H #define _LINUX_UNALIGNED_GENERIC_H -/* define __force to nothing in U-Boot */ -#define __force - /* * Cause a link-time error if we try an unaligned access other than * 1,2,4 or 8 bytes long diff --git a/include/lpd7a400_cpld.h b/include/lpd7a400_cpld.h deleted file mode 100644 index c70af09e67..0000000000 --- a/include/lpd7a400_cpld.h +++ /dev/null @@ -1,195 +0,0 @@ -/* - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * Logic lh7a400-10 Card Engine CPLD interface - */ - -#ifndef __LPD7A400_CPLD_H_ -#define __LPD7A400_CPLD_H_ - - -/* - * IO Controller Address and Register Definitions - * - using LH7A400-10 Card Engine IO Controller Specification - * (logic PN: 70000079) - */ - -/*------------------------------------------------------------------ - * Slow Peripherals (nCS6) - */ -#define LPD7A400_CPLD_CF (0x60200000) -#define LPD7A400_CPLD_ISA (0x60400000) - -/*------------------------------------------------------------------ - * Fast Peripherals (nCS7) - * - * The CPLD directs access to 0x70000000-0x701fffff to the onboard - * ethernet controller - */ -#define LPD7A400_CPLD_WLAN_BASE (0x70000000) - -/* All registers are 8 bit */ -#define LPD7A400_CPLD_CECTL_REG (0x70200000) -#define LPD7A400_CPLD_SPIDATA_REG (0x70600000) -#define LPD7A400_CPLD_SPICTL_REG (0x70800000) -#define LPD7A400_CPLD_EEPSPI_REG (0x70a00000) -#define LPD7A400_CPLD_INTMASK_REG (0x70c00000) -#define LPD7A400_CPLD_MODE_REG (0x70e00000) -#define LPD7A400_CPLD_FLASH_REG (0x71000000) -#define LPD7A400_CPLD_PWRMG_REG (0x71200000) -#define LPD7A400_CPLD_REV_REG (0x71400000) -#define LPD7A400_CPLD_EXTGPIO_REG (0x71600000) -#define LPD7A400_CPLD_GPIODATA_REG (0x71800000) -#define LPD7A400_CPLD_GPIODIR_REG (0x71a00000) - -#define LPD7A400_CPLD_REGPTR (volatile u8*) - -/* Card Engine Control Register (section 3.1.2) */ -#define CECTL_SWINT (0x80) /* Software settable interrupt source - (routed to uP PF3) - 0 = generate interrupt, 1 = do not */ -#define CECTL_OCMSK (0x40) /* USB1 connection interrupt mask - 0 = not masked, 1 = masked */ -#define CECTL_PDRV (0x20) /* PCC_nDRV output - 0 = active, 1 = inactive */ -#define CECTL_USB1C (0x10) /* USB1 connection interrupt - 0 = active, 1 = inactive */ -#define CECTL_USB1P (0x08) /* USB1 Power enable - 0 = enabled, 1 = disabled */ -#define CECTL_AWKP (0x04) /* Auto-Wakeup enable - 0 = enabled, 1 = disabled */ -#define CECTL_LCDV (0x02) /* LCD VEE enable - 0 = disabled, 1 = enabled */ -#define CECTL_WLPE (0x01) /* Wired LAN power enable - 0 = enabled, 1 = disabled */ - -/* SPI Control Register (section 3.1.5) */ -#define SPICTL_SPLD (0x20) /* SPI load (R) - 0 = data reg. has not been loaded, shift - count has not been reset - 1 = data reg. loaded, shift count reset */ -#define SPICTL_SPST (0x10) /* SPI start (RW) - 0 = don't load data reg. and reset shift count - 1 = ready to load data reg and reset shift count */ -#define SPICTL_SPDN (0x08) /* SPI done (R) - 0 = not done - 1 = access done */ -#define SPICTL_SPRW (0x04) /* SPI read/write (RW) - 0 = SPI write access - 1 = SPI read access */ -#define SPICTL_STCS (0x02) /* SPI touch chip select (RW) - 0 = not selected - 1 = selected */ -#define SPICTL_SCCS (0x01) /* SPI CODEC chip select (RW) {not used} - 0 = not selected - 1 = selected */ - -/* EEPROM SPI Interface Register (section 3.1.6) */ -#define EEPSPI_EECS (0x08) /* EEPROM chip select (RW) - 0 = not selected - 1 = selected */ -#define EEPSPI_EECK (0x04) /* EEPROM SPI clock (RW) */ -#define EEPSPI_EETX (0x02) /* EEPROM SPI tx data (RW) */ -#define EEPSPI_EERX (0x01) /* EEPROM SPI rx data (R) */ - -/* Interrupt/Mask Register (section 3.1.7) */ -#define INTMASK_CMSK (0x80) /* CPLD_nIRQD interrupt mask (RW) - 0 = not masked - 1 = masked */ -#define INTMASK_CIRQ (0x40) /* interrupt signal to CPLD (R) - 0 = interrupt active - 1 = no interrupt */ -#define INTMASK_PIRQ (0x10) /* legacy, no effect */ -#define INTMASK_TMSK (0x08) /* Touch chip interrupt mask (RW) - 0 = not masked - 1 = masked */ -#define INTMASK_WMSK (0x04) /* Wired LAN interrupt mask (RW) - 0 = not masked - 1 = masked */ -#define INTMASK_TIRQ (0x02) /* Touch chip interrupt request (R) - 0 = interrupt active - 1 = no interrupt */ -#define INTMASK_WIRQ (0x01) /* Wired LAN interrupt request (R) - 0 = interrupt active - 1 = no interrupt */ - -/* Mode Register (section 3.1.8) */ -#define MODE_VS1 (0x80) /* PCMCIA Voltage Sense 1 input (PCC_VS1) (R) - 0 = active slot VS1 pin is low - 1 = active slot VS1 pin is high */ -#define MODE_CD2 (0x40) /* PCMCIA Card Detect 2 input (PCC_nCD2) (R) - 0 = active slot CD2 is low - 1 = active slot CD2 is high */ -#define MODE_IOIS16 (0x20) /* PCMCIA IOIS16 input (PCC_nIOIS16) (R) - 0 = 16 bit access area - 1 = 8 bit access area */ -#define MODE_CD1 (0x10) /* PCMCIA Card Detect 1 input (PCC_nCD1) (R) - 0 = active slot CD1 is low - 1 = active slot CD1 is high */ -#define MODE_upMODE3 (0x08) /* Mode Pin 3 (R) - 0 = off-board boot device - 1 = on-board boot device (flash) */ -#define MODE_upMODE2 (0x04) /* Mode Pin 2 (R) (LH7A400 Little Endian only) - 0 = big endian - 1 = little endian */ -#define MODE_upMODE1 (0x02) /* Mode Pin 1 and Mode Pin 2 (R) */ -#define MODE_upMODE0 (0x01) /* - bus width at boot */ - - -/* Flash Register (section 3.1.9) */ -#define FLASH_FPOP (0x08) /* Flash populated (RW) - 0 = populated, 1 = not */ -#define FLASH_FST2 (0x04) /* Flash status (R) (RY/BY# pin for upper 16 bit chip - 0 = busy, 1 = ready */ -#define FLASH_FST1 (0x02) /* Flash status (R) (RY/BY# pin for lower 16 bit chip - 0 = busy, 1 = ready */ -#define FLASH_FPEN (0x01) /* Flash program enable (RW) - 0 = flash write protected - 1 = programming enabled */ - -/* Power Management Register (section 3.1.10) - * - when either of these is low an unmaskable interrupt to cpu - * is generated - */ -#define PWRMG_STBY (0x10) /* state of nSTANDBY signal to CPLD (R) - 0 = low, 1 = high */ -#define PWRMG_SPND (0x04) /* state of nSUSPEND signal to CPLD (R) - 0 = low, 1 = high */ - - -/* Extended GPIO Register (section 3.1.12) */ -#define EXTGPIO_STATUS1 (0x04) /* Status 1 output (RW) (uP_STATUS_1) - 0 = set pin low, 1 = set pin high */ -#define EXTGPIO_STATUS2 (0x02) /* Status 2 output (RW) (uP_STATUS_2) - 0 = set pin low, 1 = set pin high */ -#define EXTGPIO_GPIO1 (0x01) /* General purpose output (RW) (CPLD_GPIO_1) - 0 = set pin low, 1 = set pin high */ - -/* GPIO Data Register (section 3.1.13) */ -#define GPIODATA_GPIO2 (0x01) /* General purpose input/output (RW) (CPLD_GPIO_2) - 0 = set low (output) / read low (input) - 1 = set high (output) / read high (input) */ - -/* GPIO Direction Register (section 3.1.14) */ -#define GPIODIR_GPDR0 (0x01) /* GPIO2 direction (RW) - 0 = output, 1 = input */ - -#endif /* __LH7A400_H__ */ diff --git a/include/mpc83xx.h b/include/mpc83xx.h index a78f1a223f..b295d6d71b 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -74,6 +74,7 @@ #define SPR_FAMILY(spridr) ((spridr & 0xFFF00000) >> 20) #define SPR_8308 0x8100 +#define SPR_8309 0x8110 #define SPR_831X_FAMILY 0x80B #define SPR_8311 0x80B2 #define SPR_8313 0x80B0 @@ -389,6 +390,86 @@ #define SICRH_TSOBI1_V2P5 (1 << 1) #define SICRH_TSOBI2_V3P3 (0 << 0) #define SICRH_TSOBI2_V2P5 (1 << 0) + +#elif defined(CONFIG_MPC8309) +/* SICR_1 */ +#define SICR_1_UART1_UART1S (0 << (30-2)) +#define SICR_1_UART1_UART1RTS (1 << (30-2)) +#define SICR_1_I2C_I2C (0 << (30-4)) +#define SICR_1_I2C_CKSTOP (1 << (30-4)) +#define SICR_1_IRQ_A_IRQ (0 << (30-6)) +#define SICR_1_IRQ_A_MCP (1 << (30-6)) +#define SICR_1_IRQ_B_IRQ (0 << (30-8)) +#define SICR_1_IRQ_B_CKSTOP (1 << (30-8)) +#define SICR_1_GPIO_A_GPIO (0 << (30-10)) +#define SICR_1_GPIO_A_SD (2 << (30-10)) +#define SICR_1_GPIO_A_DDR (3 << (30-10)) +#define SICR_1_GPIO_B_GPIO (0 << (30-12)) +#define SICR_1_GPIO_B_SD (2 << (30-12)) +#define SICR_1_GPIO_B_QE (3 << (30-12)) +#define SICR_1_GPIO_C_GPIO (0 << (30-14)) +#define SICR_1_GPIO_C_CAN (1 << (30-14)) +#define SICR_1_GPIO_C_DDR (2 << (30-14)) +#define SICR_1_GPIO_C_LCS (3 << (30-14)) +#define SICR_1_GPIO_D_GPIO (0 << (30-16)) +#define SICR_1_GPIO_D_CAN (1 << (30-16)) +#define SICR_1_GPIO_D_DDR (2 << (30-16)) +#define SICR_1_GPIO_D_LCS (3 << (30-16)) +#define SICR_1_GPIO_E_GPIO (0 << (30-18)) +#define SICR_1_GPIO_E_CAN (1 << (30-18)) +#define SICR_1_GPIO_E_DDR (2 << (30-18)) +#define SICR_1_GPIO_E_LCS (3 << (30-18)) +#define SICR_1_GPIO_F_GPIO (0 << (30-20)) +#define SICR_1_GPIO_F_CAN (1 << (30-20)) +#define SICR_1_GPIO_F_CK (2 << (30-20)) +#define SICR_1_USB_A_USBDR (0 << (30-22)) +#define SICR_1_USB_A_UART2S (1 << (30-22)) +#define SICR_1_USB_B_USBDR (0 << (30-24)) +#define SICR_1_USB_B_UART2S (1 << (30-24)) +#define SICR_1_USB_B_UART2RTS (2 << (30-24)) +#define SICR_1_USB_C_USBDR (0 << (30-26)) +#define SICR_1_USB_C_QE_EXT (3 << (30-26)) +#define SICR_1_FEC1_FEC1 (0 << (30-28)) +#define SICR_1_FEC1_GTM (1 << (30-28)) +#define SICR_1_FEC1_GPIO (2 << (30-28)) +#define SICR_1_FEC2_FEC2 (0 << (30-30)) +#define SICR_1_FEC2_GTM (1 << (30-30)) +#define SICR_1_FEC2_GPIO (2 << (30-30)) +/* SICR_2 */ +#define SICR_2_FEC3_FEC3 (0 << (30-0)) +#define SICR_2_FEC3_TMR (1 << (30-0)) +#define SICR_2_FEC3_GPIO (2 << (30-0)) +#define SICR_2_HDLC1_A_HDLC1 (0 << (30-2)) +#define SICR_2_HDLC1_A_GPIO (1 << (30-2)) +#define SICR_2_HDLC1_A_TDM1 (2 << (30-2)) +#define SICR_2_ELBC_A_LA (0 << (30-4)) +#define SICR_2_ELBC_B_LCLK (0 << (30-6)) +#define SICR_2_HDLC2_A_HDLC2 (0 << (30-8)) +#define SICR_2_HDLC2_A_GPIO (0 << (30-8)) +#define SICR_2_HDLC2_A_TDM2 (0 << (30-8)) +/* bits 10-11 unused */ +#define SICR_2_USB_D_USBDR (0 << (30-12)) +#define SICR_2_USB_D_GPIO (2 << (30-12)) +#define SICR_2_USB_D_QE_BRG (3 << (30-12)) +#define SICR_2_PCI_PCI (0 << (30-14)) +#define SICR_2_PCI_CPCI_HS (2 << (30-14)) +#define SICR_2_HDLC1_B_HDLC1 (0 << (30-16)) +#define SICR_2_HDLC1_B_GPIO (1 << (30-16)) +#define SICR_2_HDLC1_B_QE_BRG (2 << (30-16)) +#define SICR_2_HDLC1_B_TDM1 (3 << (30-16)) +#define SICR_2_HDLC1_C_HDLC1 (0 << (30-18)) +#define SICR_2_HDLC1_C_GPIO (1 << (30-18)) +#define SICR_2_HDLC1_C_TDM1 (2 << (30-18)) +#define SICR_2_HDLC2_B_HDLC2 (0 << (30-20)) +#define SICR_2_HDLC2_B_GPIO (1 << (30-20)) +#define SICR_2_HDLC2_B_QE_BRG (2 << (30-20)) +#define SICR_2_HDLC2_B_TDM2 (3 << (30-20)) +#define SICR_2_HDLC2_C_HDLC2 (0 << (30-22)) +#define SICR_2_HDLC2_C_GPIO (1 << (30-22)) +#define SICR_2_HDLC2_C_TDM2 (2 << (30-22)) +#define SICR_2_HDLC2_C_QE_BRG (3 << (30-22)) +#define SICR_2_QUIESCE_B (0 << (30-24)) + #endif /* @@ -580,6 +661,63 @@ #define HRCWL_SVCOD_DIV_8 0x10000000 #define HRCWL_SVCOD_DIV_2 0x20000000 #define HRCWL_SVCOD_DIV_1 0x30000000 +#elif defined(CONFIG_MPC8309) + +#define HRCWL_CEVCOD 0x000000C0 +#define HRCWL_CEVCOD_SHIFT 6 +/* + * According to Errata MPC8309RMAD, Rev. 0.2, 9/2012 + * these are different than with 8360, 832x + */ +#define HRCWL_CE_PLL_VCO_DIV_2 0x00000000 +#define HRCWL_CE_PLL_VCO_DIV_4 0x00000040 +#define HRCWL_CE_PLL_VCO_DIV_8 0x00000080 + +#define HRCWL_CEPDF 0x00000020 +#define HRCWL_CEPDF_SHIFT 5 +#define HRCWL_CE_PLL_DIV_1X1 0x00000000 +#define HRCWL_CE_PLL_DIV_2X1 0x00000020 + +#define HRCWL_CEPMF 0x0000001F +#define HRCWL_CEPMF_SHIFT 0 +#define HRCWL_CE_TO_PLL_1X16_ 0x00000000 +#define HRCWL_CE_TO_PLL_1X2 0x00000002 +#define HRCWL_CE_TO_PLL_1X3 0x00000003 +#define HRCWL_CE_TO_PLL_1X4 0x00000004 +#define HRCWL_CE_TO_PLL_1X5 0x00000005 +#define HRCWL_CE_TO_PLL_1X6 0x00000006 +#define HRCWL_CE_TO_PLL_1X7 0x00000007 +#define HRCWL_CE_TO_PLL_1X8 0x00000008 +#define HRCWL_CE_TO_PLL_1X9 0x00000009 +#define HRCWL_CE_TO_PLL_1X10 0x0000000A +#define HRCWL_CE_TO_PLL_1X11 0x0000000B +#define HRCWL_CE_TO_PLL_1X12 0x0000000C +#define HRCWL_CE_TO_PLL_1X13 0x0000000D +#define HRCWL_CE_TO_PLL_1X14 0x0000000E +#define HRCWL_CE_TO_PLL_1X15 0x0000000F +#define HRCWL_CE_TO_PLL_1X16 0x00000010 +#define HRCWL_CE_TO_PLL_1X17 0x00000011 +#define HRCWL_CE_TO_PLL_1X18 0x00000012 +#define HRCWL_CE_TO_PLL_1X19 0x00000013 +#define HRCWL_CE_TO_PLL_1X20 0x00000014 +#define HRCWL_CE_TO_PLL_1X21 0x00000015 +#define HRCWL_CE_TO_PLL_1X22 0x00000016 +#define HRCWL_CE_TO_PLL_1X23 0x00000017 +#define HRCWL_CE_TO_PLL_1X24 0x00000018 +#define HRCWL_CE_TO_PLL_1X25 0x00000019 +#define HRCWL_CE_TO_PLL_1X26 0x0000001A +#define HRCWL_CE_TO_PLL_1X27 0x0000001B +#define HRCWL_CE_TO_PLL_1X28 0x0000001C +#define HRCWL_CE_TO_PLL_1X29 0x0000001D +#define HRCWL_CE_TO_PLL_1X30 0x0000001E +#define HRCWL_CE_TO_PLL_1X31 0x0000001F + +#define HRCWL_SVCOD 0x30000000 +#define HRCWL_SVCOD_SHIFT 28 +#define HRCWL_SVCOD_DIV_2 0x00000000 +#define HRCWL_SVCOD_DIV_4 0x10000000 +#define HRCWL_SVCOD_DIV_8 0x20000000 +#define HRCWL_SVCOD_DIV_1 0x30000000 #endif /* @@ -940,6 +1078,21 @@ #define SCCR_SATACM_1 0x00000055 #define SCCR_SATACM_2 0x000000aa #define SCCR_SATACM_3 0x000000ff +#elif defined(CONFIG_MPC8309) +/* SCCR bits - MPC8309 specific */ +#define SCCR_SDHCCM 0x0c000000 +#define SCCR_SDHCCM_SHIFT 26 +#define SCCR_SDHCCM_0 0x00000000 +#define SCCR_SDHCCM_1 0x04000000 +#define SCCR_SDHCCM_2 0x08000000 +#define SCCR_SDHCCM_3 0x0c000000 + +#define SCCR_USBDRCM 0x00c00000 +#define SCCR_USBDRCM_SHIFT 22 +#define SCCR_USBDRCM_0 0x00000000 +#define SCCR_USBDRCM_1 0x00400000 +#define SCCR_USBDRCM_2 0x00800000 +#define SCCR_USBDRCM_3 0x00c00000 #endif #define SCCR_PCIEXP1CM 0x00300000 @@ -969,7 +1122,7 @@ */ #define CSCONFIG_EN 0x80000000 #define CSCONFIG_AP 0x00800000 -#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) +#if defined(CONFIG_MPC830x) || defined(CONFIG_MPC831x) #define CSCONFIG_ODT_RD_NEVER 0x00000000 #define CSCONFIG_ODT_RD_ONLY_CURRENT 0x00100000 #define CSCONFIG_ODT_RD_ONLY_OTHER_CS 0x00200000 diff --git a/include/net.h b/include/net.h index 35393366d3..970d4d1fab 100644 --- a/include/net.h +++ b/include/net.h @@ -102,12 +102,13 @@ extern int eth_register(struct eth_device* dev);/* Register network device */ extern int eth_unregister(struct eth_device *dev);/* Remove network device */ extern void eth_try_another(int first_restart); /* Change the device */ extern void eth_set_current(void); /* set nterface to ethcur var */ + /* get the current device MAC */ +extern struct eth_device *eth_current; + static inline __attribute__((always_inline)) struct eth_device *eth_get_dev(void) { - extern struct eth_device *eth_current; - return eth_current; } extern struct eth_device *eth_get_dev_by_name(const char *devname); @@ -517,10 +518,10 @@ enum net_loop_state { NETLOOP_SUCCESS, NETLOOP_FAIL }; +extern enum net_loop_state net_state; + static inline void net_set_state(enum net_loop_state state) { - extern enum net_loop_state net_state; - debug_cond(DEBUG_INT_STATE, "--- NetState set to %d\n", state); net_state = state; } diff --git a/include/pcmcia.h b/include/pcmcia.h index ca0bf224f1..0cc7f3ba54 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -58,8 +58,6 @@ # define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_ICU862) /* The ICU862 use SLOT_B */ # define CONFIG_PCMCIA_SLOT_B -#elif defined(CONFIG_C2MON) /* The C2MON use SLOT_B */ -# define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_R360MPI) /* The R360MPI use SLOT_B */ # define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_ATC) /* The ATC use SLOT_A */ diff --git a/include/scsi.h b/include/scsi.h index 89ae45f8e8..9da764bdcf 100644 --- a/include/scsi.h +++ b/include/scsi.h @@ -150,6 +150,8 @@ typedef struct SCSI_cmd_block{ #define SCSI_READ6 0x08 /* Read 6-byte (MANDATORY) */ #define SCSI_READ10 0x28 /* Read 10-byte (MANDATORY) */ #define SCSI_RD_CAPAC 0x25 /* Read Capacity (MANDATORY) */ +#define SCSI_RD_CAPAC10 SCSI_RD_CAPAC /* Read Capacity (10) */ +#define SCSI_RD_CAPAC16 0x9e /* Read Capacity (16) */ #define SCSI_RD_DEFECT 0x37 /* Read Defect Data (O) */ #define SCSI_READ_LONG 0x3E /* Read Long (O) */ #define SCSI_REASS_BLK 0x07 /* Reassign Blocks (O) */ @@ -189,6 +191,8 @@ void scsi_low_level_init(int busdevfunc); void scsi_init(void); void scsi_scan(int mode); +/** @return the number of scsi disks */ +int scsi_get_disk_count(void); #define SCSI_IDENTIFY 0xC0 /* not used */ diff --git a/include/sdhci.h b/include/sdhci.h index c0345ed86e..c44793d5ec 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -224,6 +224,7 @@ #define SDHCI_QUIRK_NO_HISPD_BIT (1 << 3) #define SDHCI_QUIRK_BROKEN_VOLTAGE (1 << 4) #define SDHCI_QUIRK_NO_CD (1 << 5) +#define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6) /* to make gcc happy */ struct sdhci_host; diff --git a/include/serial.h b/include/serial.h index a8d23f519d..14f863ed20 100644 --- a/include/serial.h +++ b/include/serial.h @@ -20,6 +20,8 @@ struct serial_device { struct serial_device *next; }; +void default_serial_puts(const char *s); + extern struct serial_device serial_smc_device; extern struct serial_device serial_scc_device; extern struct serial_device *default_serial_console(void); diff --git a/include/status_led.h b/include/status_led.h index c85c206772..da9fae9203 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -72,22 +72,6 @@ void status_led_set (int led, int state); # define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ -/***** ETX_094 ********************************************************/ -#elif defined(CONFIG_ETX094) - -# define STATUS_LED_PAR im_ioport.iop_pdpar -# define STATUS_LED_DIR im_ioport.iop_pddir -# undef STATUS_LED_ODR -# define STATUS_LED_DAT im_ioport.iop_pddat - -# define STATUS_LED_BIT 0x00000001 -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING - -# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ - -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - /***** GEN860T *********************************************************/ #elif defined(CONFIG_GEN860T) @@ -170,26 +154,6 @@ void status_led_set (int led, int state); # define STATUS_LED_GREEN 1 # define STATUS_LED_BOOT 2 /* IDE LED used for boot status */ -/***** LANTEC *********************************************************/ -#elif defined(CONFIG_LANTEC) - -# define STATUS_LED_PAR im_ioport.iop_pdpar -# define STATUS_LED_DIR im_ioport.iop_pddir -# undef STATUS_LED_ODR -# define STATUS_LED_DAT im_ioport.iop_pddat - -# if CONFIG_LATEC < 2 -# define STATUS_LED_BIT 0x1000 -# else -# define STATUS_LED_BIT 0x0800 -# endif -# define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -# define STATUS_LED_STATE STATUS_LED_BLINKING - -# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ - -# define STATUS_LED_BOOT 0 /* LED 0 used for boot status */ - /***** ICU862 ********************************************************/ #elif defined(CONFIG_ICU862) diff --git a/include/twl4030.h b/include/twl4030.h index 9cd32ab45a..0c17f5929b 100644 --- a/include/twl4030.h +++ b/include/twl4030.h @@ -151,6 +151,103 @@ #define TWL4030_PM_MASTER_SW_EVENTS_DEVSLP (1 << 1) #define TWL4030_PM_MASTER_SW_EVENTS_DEVOFF (1 << 0) +/* Power bus message definitions */ + +/* The TWL4030/5030 splits its power-management resources (the various + * regulators, clock and reset lines) into 3 processor groups - P1, P2 and + * P3. These groups can then be configured to transition between sleep, wait-on + * and active states by sending messages to the power bus. See Section 5.4.2 + * Power Resources of TWL4030 TRM + */ + +/* Processor groups */ +#define DEV_GRP_NULL 0x0 +#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */ +#define DEV_GRP_P2 0x2 /* P2: all Modem devices */ +#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */ + +/* Resource groups */ +#define RES_GRP_RES 0x0 /* Reserved */ +#define RES_GRP_PP 0x1 /* Power providers */ +#define RES_GRP_RC 0x2 /* Reset and control */ +#define RES_GRP_PP_RC 0x3 +#define RES_GRP_PR 0x4 /* Power references */ +#define RES_GRP_PP_PR 0x5 +#define RES_GRP_RC_PR 0x6 +#define RES_GRP_ALL 0x7 /* All resource groups */ + +#define RES_TYPE2_R0 0x0 + +#define RES_TYPE_ALL 0x7 + +/* Resource states */ +#define RES_STATE_WRST 0xF +#define RES_STATE_ACTIVE 0xE +#define RES_STATE_SLEEP 0x8 +#define RES_STATE_OFF 0x0 + +/* Power resources */ + +/* Power providers */ +#define RES_VAUX1 1 +#define RES_VAUX2 2 +#define RES_VAUX3 3 +#define RES_VAUX4 4 +#define RES_VMMC1 5 +#define RES_VMMC2 6 +#define RES_VPLL1 7 +#define RES_VPLL2 8 +#define RES_VSIM 9 +#define RES_VDAC 10 +#define RES_VINTANA1 11 +#define RES_VINTANA2 12 +#define RES_VINTDIG 13 +#define RES_VIO 14 +#define RES_VDD1 15 +#define RES_VDD2 16 +#define RES_VUSB_1V5 17 +#define RES_VUSB_1V8 18 +#define RES_VUSB_3V1 19 +#define RES_VUSBCP 20 +#define RES_REGEN 21 +/* Reset and control */ +#define RES_NRES_PWRON 22 +#define RES_CLKEN 23 +#define RES_SYSEN 24 +#define RES_HFCLKOUT 25 +#define RES_32KCLKOUT 26 +#define RES_RESET 27 +/* Power Reference */ +#define RES_Main_Ref 28 + +#define TOTAL_RESOURCES 28 +/* + * Power Bus Message Format ... these can be sent individually by Linux, + * but are usually part of downloaded scripts that are run when various + * power events are triggered. + * + * Broadcast Message (16 Bits): + * DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4] + * RES_STATE[3:0] + * + * Singular Message (16 Bits): + * DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0] + */ + +#define MSG_BROADCAST(devgrp, grp, type, type2, state) \ + ((devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \ + | (type) << 4 | (state)) + +#define MSG_SINGULAR(devgrp, id, state) \ + ((devgrp) << 13 | 0 << 12 | (id) << 4 | (state)) + +#define MSG_BROADCAST_ALL(devgrp, state) \ + ((devgrp) << 5 | (state)) + +#define MSG_BROADCAST_REF MSG_BROADCAST_ALL +#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL +#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL + /* Power Managment Receiver */ #define TWL4030_PM_RECEIVER_SC_CONFIG 0x5B #define TWL4030_PM_RECEIVER_SC_DETECT1 0x5C @@ -311,6 +408,7 @@ #define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_30 0x02 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_32 0x03 +#define TWL4030_PM_RECEIVER_VSIM_VSEL_18 0x03 /* Device Selection in PM Receiver Module */ #define TWL4030_PM_RECEIVER_DEV_GRP_P1 0x20 diff --git a/include/u-boot/zlib.h b/include/u-boot/zlib.h index b611fe7c79..e23ceb50ca 100644 --- a/include/u-boot/zlib.h +++ b/include/u-boot/zlib.h @@ -505,7 +505,7 @@ typedef gz_header FAR *gz_headerp; #define Z_DEFLATED 8 /* The deflate compression method (the only one supported in this version) */ -#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ +#define Z_NULL (void *)0 /* for initializing zalloc, zfree, opaque */ /* basic functions */ diff --git a/lib/libfdt/Makefile b/lib/libfdt/Makefile index c965577dc0..0693d4bf55 100644 --- a/lib/libfdt/Makefile +++ b/lib/libfdt/Makefile @@ -27,7 +27,7 @@ LIB = $(obj)libfdt.o SOBJS = -COBJS-libfdt += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o +COBJS-libfdt += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o fdt_empty_tree.o COBJS-$(CONFIG_OF_LIBFDT) += $(COBJS-libfdt) COBJS-$(CONFIG_FIT) += $(COBJS-libfdt) diff --git a/lib/libfdt/fdt_empty_tree.c b/lib/libfdt/fdt_empty_tree.c new file mode 100644 index 0000000000..f72d13b1d1 --- /dev/null +++ b/lib/libfdt/fdt_empty_tree.c @@ -0,0 +1,84 @@ +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2012 David Gibson, IBM Corporation. + * + * libfdt is dual licensed: you can use it either under the terms of + * the GPL, or the BSD license, at your option. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Alternatively, + * + * b) Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +int fdt_create_empty_tree(void *buf, int bufsize) +{ + int err; + + err = fdt_create(buf, bufsize); + if (err) + return err; + + err = fdt_finish_reservemap(buf); + if (err) + return err; + + err = fdt_begin_node(buf, ""); + if (err) + return err; + + err = fdt_end_node(buf); + if (err) + return err; + + err = fdt_finish(buf); + if (err) + return err; + + return fdt_open_into(buf, buf, bufsize); +} + diff --git a/lib/libfdt/fdt_rw.c b/lib/libfdt/fdt_rw.c index 5c27a677e3..5ed23d6f19 100644 --- a/lib/libfdt/fdt_rw.c +++ b/lib/libfdt/fdt_rw.c @@ -293,6 +293,33 @@ int fdt_setprop(void *fdt, int nodeoffset, const char *name, return 0; } +int fdt_appendprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + struct fdt_property *prop; + int err, oldlen, newlen; + + FDT_RW_CHECK_HEADER(fdt); + + prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen); + if (prop) { + newlen = len + oldlen; + err = _fdt_splice_struct(fdt, prop->data, + FDT_TAGALIGN(oldlen), + FDT_TAGALIGN(newlen)); + if (err) + return err; + prop->len = cpu_to_fdt32(newlen); + memcpy(prop->data + oldlen, val, len); + } else { + err = _fdt_add_property(fdt, nodeoffset, name, len, &prop); + if (err) + return err; + memcpy(prop->data, val, len); + } + return 0; +} + int fdt_delprop(void *fdt, int nodeoffset, const char *name) { struct fdt_property *prop; diff --git a/lib/vsprintf.c b/lib/vsprintf.c index d7627632d0..b7a79c0e0c 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -28,7 +28,7 @@ /* some reluctance to put this into a new limits.h, so it is here */ #define INT_MAX ((int)(~0U>>1)) -const char hex_asc[] = "0123456789abcdef"; +static const char hex_asc[] = "0123456789abcdef"; #define hex_asc_lo(x) hex_asc[((x) & 0x0f)] #define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4] @@ -395,7 +395,7 @@ static char *string(char *buf, char *end, char *s, int field_width, { int len, i; - if (s == 0) + if (s == NULL) s = "<NULL>"; len = strnlen(s, precision); @@ -495,9 +495,15 @@ static char *ip4_addr_string(char *buf, char *end, u8 *addr, int field_width, static char *pointer(const char *fmt, char *buf, char *end, void *ptr, int field_width, int precision, int flags) { + /* + * Being a boot loader, we explicitly allow pointers to + * (physical) address null. + */ +#if 0 if (!ptr) return string(buf, end, "(null)", field_width, precision, flags); +#endif #ifdef CONFIG_CMD_NET switch (*fmt) { diff --git a/lib/zlib/adler32.c b/lib/zlib/adler32.c index dc9480d92f..b468441d73 100644 --- a/lib/zlib/adler32.c +++ b/lib/zlib/adler32.c @@ -54,10 +54,7 @@ #endif /* ========================================================================= */ -uLong ZEXPORT adler32(adler, buf, len) - uLong adler; - const Bytef *buf; - uInt len; +uLong ZEXPORT adler32(uLong adler, const Bytef *buf, uInt len) { unsigned long sum2; unsigned n; diff --git a/lib/zlib/inffast.c b/lib/zlib/inffast.c index 38f2f905e8..0700e04cb9 100644 --- a/lib/zlib/inffast.c +++ b/lib/zlib/inffast.c @@ -66,9 +66,8 @@ requires strm->avail_out >= 258 for each loop to avoid checking for output space. */ -void inflate_fast(strm, start) -z_streamp strm; -unsigned start; /* inflate()'s starting value for strm->avail_out */ +void inflate_fast(z_streamp strm, unsigned start) +/* start: inflate()'s starting value for strm->avail_out */ { struct inflate_state FAR *state; unsigned char FAR *in; /* local strm->next_in */ diff --git a/lib/zlib/inflate.c b/lib/zlib/inflate.c index 1eef609de5..6411c47932 100644 --- a/lib/zlib/inflate.c +++ b/lib/zlib/inflate.c @@ -5,8 +5,7 @@ local void fixedtables OF((struct inflate_state FAR *state)); local int updatewindow OF((z_streamp strm, unsigned out)); -int ZEXPORT inflateReset(strm) -z_streamp strm; +int ZEXPORT inflateReset(z_streamp strm) { struct inflate_state FAR *state; @@ -31,11 +30,8 @@ z_streamp strm; return Z_OK; } -int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size) -z_streamp strm; -int windowBits; -const char *version; -int stream_size; +int ZEXPORT inflateInit2_(z_streamp strm, int windowBits, const char *version, + int stream_size) { struct inflate_state FAR *state; @@ -74,16 +70,12 @@ int stream_size; return inflateReset(strm); } -int ZEXPORT inflateInit_(strm, version, stream_size) -z_streamp strm; -const char *version; -int stream_size; +int ZEXPORT inflateInit_(z_streamp strm, const char *version, int stream_size) { return inflateInit2_(strm, DEF_WBITS, version, stream_size); } -local void fixedtables(state) -struct inflate_state FAR *state; +local void fixedtables(struct inflate_state FAR *state) { state->lencode = lenfix; state->lenbits = 9; @@ -105,9 +97,7 @@ struct inflate_state FAR *state; output will fall in the output data, making match copies simpler and faster. The advantage may be dependent on the size of the processor's data caches. */ -local int updatewindow(strm, out) -z_streamp strm; -unsigned out; +local int updatewindow(z_streamp strm, unsigned out) { struct inflate_state FAR *state; unsigned copy, dist; @@ -335,9 +325,7 @@ unsigned out; when flush is set to Z_FINISH, inflate() cannot return Z_OK. Instead it will return Z_BUF_ERROR if it has not reached the end of the stream. */ -int ZEXPORT inflate(strm, flush) -z_streamp strm; -int flush; +int ZEXPORT inflate(z_streamp strm, int flush) { struct inflate_state FAR *state; unsigned char FAR *next; /* next input */ @@ -938,8 +926,7 @@ int flush; return ret; } -int ZEXPORT inflateEnd(strm) -z_streamp strm; +int ZEXPORT inflateEnd(z_streamp strm) { struct inflate_state FAR *state; if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) diff --git a/lib/zlib/inftrees.c b/lib/zlib/inftrees.c index c6d4c038dc..7474a52e7f 100644 --- a/lib/zlib/inftrees.c +++ b/lib/zlib/inftrees.c @@ -29,13 +29,9 @@ table index bits. It will differ if the request is greater than the longest code or if it is less than the shortest code. */ -int inflate_table(type, lens, codes, table, bits, work) -codetype type; -unsigned short FAR *lens; -unsigned codes; -code FAR * FAR *table; -unsigned FAR *bits; -unsigned short FAR *work; +int inflate_table(codetype type, unsigned short FAR *lens, unsigned codes, + code FAR * FAR *table, unsigned FAR *bits, + unsigned short FAR *work) { unsigned len; /* a code's length in bits */ unsigned sym; /* index of code symbols */ diff --git a/lib/zlib/zutil.c b/lib/zlib/zutil.c index 65f9554747..14f6eb1e07 100644 --- a/lib/zlib/zutil.c +++ b/lib/zlib/zutil.c @@ -49,10 +49,7 @@ extern voidp calloc OF((uInt items, uInt size)); extern void free OF((voidpf ptr)); #endif -voidpf zcalloc (opaque, items, size) - voidpf opaque; - unsigned items; - unsigned size; +voidpf zcalloc(voidpf opaque, unsigned items, unsigned size) { if (opaque) items += size - size; /* make compiler happy */ @@ -60,10 +57,7 @@ voidpf zcalloc (opaque, items, size) (voidpf)calloc(items, size); } -void zcfree (opaque, ptr, nb) - voidpf opaque; - voidpf ptr; - unsigned nb; +void zcfree(voidpf opaque, voidpf ptr, unsigned nb) { free(ptr); if (opaque) diff --git a/nand_spl/board/freescale/mpc8536ds/Makefile b/nand_spl/board/freescale/mpc8536ds/Makefile index 43da3df157..e5388d89c8 100644 --- a/nand_spl/board/freescale/mpc8536ds/Makefile +++ b/nand_spl/board/freescale/mpc8536ds/Makefile @@ -32,6 +32,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -61,8 +62,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ # create symbolic links for common files diff --git a/nand_spl/board/freescale/mpc8569mds/Makefile b/nand_spl/board/freescale/mpc8569mds/Makefile index 43da3df157..e5388d89c8 100644 --- a/nand_spl/board/freescale/mpc8569mds/Makefile +++ b/nand_spl/board/freescale/mpc8569mds/Makefile @@ -32,6 +32,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -61,8 +62,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ # create symbolic links for common files diff --git a/nand_spl/board/freescale/mpc8572ds/Makefile b/nand_spl/board/freescale/mpc8572ds/Makefile index 43da3df157..e5388d89c8 100644 --- a/nand_spl/board/freescale/mpc8572ds/Makefile +++ b/nand_spl/board/freescale/mpc8572ds/Makefile @@ -32,6 +32,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -61,8 +62,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ # create symbolic links for common files diff --git a/nand_spl/board/freescale/mx31pdk/Makefile b/nand_spl/board/freescale/mx31pdk/Makefile index 87784d2937..43e72c42d4 100644 --- a/nand_spl/board/freescale/mx31pdk/Makefile +++ b/nand_spl/board/freescale/mx31pdk/Makefile @@ -6,6 +6,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL @@ -36,8 +37,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds -Map $(nandobj)u-boot-spl.map \ -o $@ -$(nandobj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ ######################################################################### diff --git a/nand_spl/board/freescale/mx31pdk/u-boot.lds b/nand_spl/board/freescale/mx31pdk/u-boot.lds index a130a1f9df..a26110f393 100644 --- a/nand_spl/board/freescale/mx31pdk/u-boot.lds +++ b/nand_spl/board/freescale/mx31pdk/u-boot.lds @@ -46,9 +46,11 @@ SECTIONS } . = ALIGN(4); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = ALIGN(4); diff --git a/nand_spl/board/freescale/p1010rdb/Makefile b/nand_spl/board/freescale/p1010rdb/Makefile index cdbd49292c..f270faae02 100644 --- a/nand_spl/board/freescale/p1010rdb/Makefile +++ b/nand_spl/board/freescale/p1010rdb/Makefile @@ -32,6 +32,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -62,8 +63,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ # create symbolic links for common files diff --git a/nand_spl/board/freescale/p1023rds/Makefile b/nand_spl/board/freescale/p1023rds/Makefile index da435213fc..b2882844b3 100644 --- a/nand_spl/board/freescale/p1023rds/Makefile +++ b/nand_spl/board/freescale/p1023rds/Makefile @@ -27,6 +27,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -57,8 +58,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ # create symbolic links for common files diff --git a/nand_spl/board/freescale/p1_p2_rdb/Makefile b/nand_spl/board/freescale/p1_p2_rdb/Makefile index 43da3df157..e5388d89c8 100644 --- a/nand_spl/board/freescale/p1_p2_rdb/Makefile +++ b/nand_spl/board/freescale/p1_p2_rdb/Makefile @@ -32,6 +32,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -61,8 +62,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ # create symbolic links for common files diff --git a/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile b/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile index 46cf7099b6..7146d16a27 100644 --- a/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile +++ b/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile @@ -32,6 +32,7 @@ include $(TOPDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ $(LDFLAGS) $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_NAND_SPL @@ -62,8 +63,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds -Map $(nandobj)u-boot-spl.map \ -o $(nandobj)u-boot-spl -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ # create symbolic links for common files diff --git a/nand_spl/board/karo/tx25/Makefile b/nand_spl/board/karo/tx25/Makefile index 0336346660..becf7fa99e 100644 --- a/nand_spl/board/karo/tx25/Makefile +++ b/nand_spl/board/karo/tx25/Makefile @@ -27,6 +27,7 @@ include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk nandobj := $(OBJTREE)/nand_spl/ LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds +LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \ $(LDFLAGS_FINAL) AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL @@ -57,8 +58,12 @@ $(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot.lds -Map $(nandobj)u-boot-spl.map \ -o $@ -$(nandobj)u-boot.lds: $(LDSCRIPT) - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ +# The following line expands into whole rule which generates $(LSTSCRIPT), +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS))) +$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT) + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@ ######################################################################### diff --git a/nand_spl/board/karo/tx25/u-boot.lds b/nand_spl/board/karo/tx25/u-boot.lds index d2b08f60c5..ee361314fd 100644 --- a/nand_spl/board/karo/tx25/u-boot.lds +++ b/nand_spl/board/karo/tx25/u-boot.lds @@ -46,9 +46,11 @@ SECTIONS } . = ALIGN(4); - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = ALIGN(4); diff --git a/nand_spl/board/samsung/smdk6400/u-boot.lds b/nand_spl/board/samsung/smdk6400/u-boot.lds index 567f63516f..2ed646630c 100644 --- a/nand_spl/board/samsung/smdk6400/u-boot.lds +++ b/nand_spl/board/samsung/smdk6400/u-boot.lds @@ -50,9 +50,11 @@ SECTIONS . = ALIGN(4); .got : { *(.got) } - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; + + . = ALIGN(4); + .u_boot_list : { + #include <u-boot.lst> + } . = ALIGN(4); @@ -27,15 +27,15 @@ #endif IPaddr_t NetArpWaitPacketIP; -IPaddr_t NetArpWaitReplyIP; +static IPaddr_t NetArpWaitReplyIP; /* MAC address of waiting packet's destination */ uchar *NetArpWaitPacketMAC; int NetArpWaitTxPacketSize; ulong NetArpWaitTimerStart; int NetArpWaitTry; -uchar *NetArpTxPacket; /* THE ARP transmit packet */ -uchar NetArpPacketBuf[PKTSIZE_ALIGN + PKTALIGN]; +static uchar *NetArpTxPacket; /* THE ARP transmit packet */ +static uchar NetArpPacketBuf[PKTSIZE_ALIGN + PKTALIGN]; void ArpInit(void) { diff --git a/net/bootp.c b/net/bootp.c index cd5c5dd1d7..4300f1c2f1 100644 --- a/net/bootp.c +++ b/net/bootp.c @@ -41,9 +41,9 @@ ulong BootpID; int BootpTry; #if defined(CONFIG_CMD_DHCP) -dhcp_state_t dhcp_state = INIT; -unsigned long dhcp_leasetime; -IPaddr_t NetDHCPServerIP; +static dhcp_state_t dhcp_state = INIT; +static unsigned long dhcp_leasetime; +static IPaddr_t NetDHCPServerIP; static void DhcpHandler(uchar *pkt, unsigned dest, IPaddr_t sip, unsigned src, unsigned len); @@ -180,7 +180,7 @@ IPaddr_t NetNtpServerIP; int NetTimeOffset; #endif -uchar PktBuf[(PKTBUFSRX+1) * PKTSIZE_ALIGN + PKTALIGN]; +static uchar PktBuf[(PKTBUFSRX+1) * PKTSIZE_ALIGN + PKTALIGN]; /* Receive packet */ uchar *NetRxPackets[PKTBUFSRX]; diff --git a/net/ping.h b/net/ping.h index fd8d8d9778..8c71be4fdf 100644 --- a/net/ping.h +++ b/net/ping.h @@ -8,8 +8,6 @@ * Copyright 2000-2002 Wolfgang Denk, wd@denx.de */ -#if defined(CONFIG_CMD_PING) - #ifndef __PING_H__ #define __PING_H__ @@ -31,4 +29,3 @@ void ping_start(void); void ping_receive(struct ethernet_hdr *et, struct ip_udp_hdr *ip, int len); #endif /* __PING_H__ */ -#endif diff --git a/net/tftp.h b/net/tftp.h index 18e4c9c25d..2b686e3ca6 100644 --- a/net/tftp.h +++ b/net/tftp.h @@ -22,6 +22,9 @@ void TftpStart(enum proto_t protocol); /* Begin TFTP get/put */ extern void TftpStartServer(void); /* Wait for incoming TFTP put */ #endif +extern ulong TftpRRQTimeoutMSecs; +extern int TftpRRQTimeoutCountMax; + /**********************************************************************/ #endif /* __TFTP_H__ */ diff --git a/post/cpu/mpc8xx/ether.c b/post/cpu/mpc8xx/ether.c index fcbb30067e..728f7e0a44 100644 --- a/post/cpu/mpc8xx/ether.c +++ b/post/cpu/mpc8xx/ether.c @@ -381,49 +381,6 @@ static void scc_init (int scc_index) immr->im_cpm.cp_scc[scc_index].scc_psmr = SCC_PSMR_ENCRC | SCC_PSMR_NIB22 | SCC_PSMR_LPB; -#if 0 - /* - * Configure Ethernet TENA Signal - */ - -#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA)) - immr->im_ioport.iop_pcpar |= PC_ENET_TENA; - immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA; -#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA)) - immr->im_cpm.cp_pbpar |= PB_ENET_TENA; - immr->im_cpm.cp_pbdir |= PB_ENET_TENA; -#else -#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined -#endif - -#if defined(CONFIG_ADS) && defined(CONFIG_MPC860) - /* - * Port C is used to control the PHY,MC68160. - */ - immr->im_ioport.iop_pcdir |= - (PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL); - - immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL; - immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL); - *((uint *) BCSR1) &= ~BCSR1_ETHEN; -#endif /* MPC860ADS */ - -#if defined(CONFIG_AMX860) - /* - * Port B is used to control the PHY,MC68160. - */ - immr->im_cpm.cp_pbdir |= - (PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL); - - immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL; - immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL); - - immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN; - immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN; -#endif /* AMX860 */ - -#endif /* 0 */ - #ifdef CONFIG_RPXCLASSIC *((uchar *) BCSR0) &= ~BCSR0_ETHLPBK; *((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX); @@ -449,7 +406,7 @@ static void scc_init (int scc_index) */ #if defined (CONFIG_FADS) udelay (10000); /* wait 10 ms */ -#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC) +#elif defined(CONFIG_RPXCLASSIC) udelay (100000); /* wait 100 ms */ #endif } diff --git a/spl/.gitignore b/spl/.gitignore index 7c8814709f..8cf487e5c8 100644 --- a/spl/.gitignore +++ b/spl/.gitignore @@ -2,3 +2,4 @@ u-boot-spl u-boot-spl.bin u-boot-spl.lds u-boot-spl.map +u-boot.lst diff --git a/spl/Makefile b/spl/Makefile index 58ef40ac01..6a79c3cd38 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -112,16 +112,13 @@ LDPPFLAGS += \ $(shell $(LD) --version | \ sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') -ifdef CONFIG_OMAP $(OBJTREE)/MLO: $(obj)u-boot-spl.bin $(OBJTREE)/tools/mkimage -T omapimage \ -a $(CONFIG_SPL_TEXT_BASE) -d $< $@ -endif -ifdef CONFIG_AM33XX -$(OBJTREE)/MLO: $(obj)u-boot-spl.bin - $(OBJTREE)/tools/mkimage -T omapimage \ + +$(OBJTREE)/MLO.byteswap: $(obj)u-boot-spl.bin + $(OBJTREE)/tools/mkimage -T omapimage -n byteswap \ -a $(CONFIG_SPL_TEXT_BASE) -d $< $@ -endif ifneq ($(CONFIG_IMX_CONFIG),) $(OBJTREE)/SPL: $(obj)u-boot-spl.bin @@ -160,8 +157,12 @@ $(START): depend $(LIBS): depend $(MAKE) -C $(SRCTREE)$(dir $(subst $(SPLTREE),,$@)) -$(obj)u-boot-spl.lds: $(LDSCRIPT) depend - $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - < $< > $@ +# The following line expands into whole rule which generates u-boot.lst, +# the file containing u-boots LG-array linker section. This is included into +# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file. +$(eval $(call make_u_boot_list, $(obj)u-boot.lst, $(LIBS))) +$(obj)u-boot-spl.lds: $(LDSCRIPT) $(obj)u-boot.lst depend + $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj). -ansi -D__ASSEMBLY__ -P - < $< > $@ depend: $(obj).depend .PHONY: depend diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c index ab8c15d30e..9b023e807b 100644 --- a/tools/env/fw_env.c +++ b/tools/env/fw_env.c @@ -119,102 +119,8 @@ static unsigned char active_flag = 1; /* obsolete_flag must be 0 to efficiently set it on NOR flash without erasing */ static unsigned char obsolete_flag = 0; - -static char default_environment[] = { -#if defined(CONFIG_BOOTARGS) - "bootargs=" CONFIG_BOOTARGS "\0" -#endif -#if defined(CONFIG_BOOTCOMMAND) - "bootcmd=" CONFIG_BOOTCOMMAND "\0" -#endif -#if defined(CONFIG_RAMBOOTCOMMAND) - "ramboot=" CONFIG_RAMBOOTCOMMAND "\0" -#endif -#if defined(CONFIG_NFSBOOTCOMMAND) - "nfsboot=" CONFIG_NFSBOOTCOMMAND "\0" -#endif -#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0) - "bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0" -#endif -#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0) - "baudrate=" __stringify(CONFIG_BAUDRATE) "\0" -#endif -#ifdef CONFIG_LOADS_ECHO - "loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0" -#endif -#ifdef CONFIG_ETHADDR - "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" -#endif -#ifdef CONFIG_ETH1ADDR - "eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0" -#endif -#ifdef CONFIG_ETH2ADDR - "eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0" -#endif -#ifdef CONFIG_ETH3ADDR - "eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0" -#endif -#ifdef CONFIG_ETH4ADDR - "eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0" -#endif -#ifdef CONFIG_ETH5ADDR - "eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0" -#endif -#ifdef CONFIG_ETHPRIME - "ethprime=" CONFIG_ETHPRIME "\0" -#endif -#ifdef CONFIG_IPADDR - "ipaddr=" __stringify(CONFIG_IPADDR) "\0" -#endif -#ifdef CONFIG_SERVERIP - "serverip=" __stringify(CONFIG_SERVERIP) "\0" -#endif -#ifdef CONFIG_SYS_AUTOLOAD - "autoload=" CONFIG_SYS_AUTOLOAD "\0" -#endif -#ifdef CONFIG_ROOTPATH - "rootpath=" CONFIG_ROOTPATH "\0" -#endif -#ifdef CONFIG_GATEWAYIP - "gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0" -#endif -#ifdef CONFIG_NETMASK - "netmask=" __stringify(CONFIG_NETMASK) "\0" -#endif -#ifdef CONFIG_HOSTNAME - "hostname=" __stringify(CONFIG_HOSTNAME) "\0" -#endif -#ifdef CONFIG_BOOTFILE - "bootfile=" CONFIG_BOOTFILE "\0" -#endif -#ifdef CONFIG_LOADADDR - "loadaddr=" __stringify(CONFIG_LOADADDR) "\0" -#endif -#ifdef CONFIG_PREBOOT - "preboot=" CONFIG_PREBOOT "\0" -#endif -#ifdef CONFIG_CLOCKS_IN_MHZ - "clocks_in_mhz=" "1" "\0" -#endif -#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0) - "pcidelay=" __stringify(CONFIG_PCI_BOOTDELAY) "\0" -#endif -#ifdef CONFIG_ENV_VARS_UBOOT_CONFIG - "arch=" CONFIG_SYS_ARCH "\0" - "cpu=" CONFIG_SYS_CPU "\0" - "board=" CONFIG_SYS_BOARD "\0" -#ifdef CONFIG_SYS_VENDOR - "vendor=" CONFIG_SYS_VENDOR "\0" -#endif -#ifdef CONFIG_SYS_SOC - "soc=" CONFIG_SYS_SOC "\0" -#endif -#endif -#ifdef CONFIG_EXTRA_ENV_SETTINGS - CONFIG_EXTRA_ENV_SETTINGS -#endif - "\0" /* Termimate struct environment data with 2 NULs */ -}; +#define DEFAULT_ENV_INSTANCE_STATIC +#include <env_default.h> static int flash_io (int mode); static char *envmatch (char * s1, char * s2); @@ -494,6 +400,8 @@ int fw_setenv(int argc, char *argv[]) char *val = argv[i]; size_t val_len = strlen(val); + if (value) + value[len - 1] = ' '; value = realloc(value, len + val_len + 1); if (!value) { fprintf(stderr, @@ -504,9 +412,8 @@ int fw_setenv(int argc, char *argv[]) memcpy(value + len, val, val_len); len += val_len; - value[len++] = ' '; + value[len++] = '\0'; } - value[len - 1] = '\0'; fw_env_write(name, value); @@ -738,8 +645,8 @@ static int flash_read_buf (int dev, int fd, void *buf, size_t count, return -1; } #ifdef DEBUG - fprintf (stderr, "Read 0x%x bytes at 0x%llx\n", - rc, blockstart + block_seek); + fprintf(stderr, "Read 0x%x bytes at 0x%llx on %s\n", + rc, blockstart + block_seek, DEVNAME(dev)); #endif processed += readlen; readlen = min (blocklen, count - processed); @@ -818,6 +725,18 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count, if (write_total != rc) return -1; +#ifdef DEBUG + fprintf(stderr, "Preserving data "); + if (block_seek != 0) + fprintf(stderr, "0x%x - 0x%lx", 0, block_seek - 1); + if (block_seek + count != write_total) { + if (block_seek != 0) + fprintf(stderr, " and "); + fprintf(stderr, "0x%lx - 0x%x", + block_seek + count, write_total - 1); + } + fprintf(stderr, "\n"); +#endif /* Overwrite the old environment */ memcpy (data + block_seek, buf, count); } else { @@ -876,7 +795,8 @@ static int flash_write_buf (int dev, int fd, void *buf, size_t count, } #ifdef DEBUG - printf ("Write 0x%x bytes at 0x%llx\n", erasesize, blockstart); + fprintf(stderr, "Write 0x%x bytes at 0x%llx\n", erasesize, + blockstart); #endif if (write (fd, data + processed, erasesize) != erasesize) { fprintf (stderr, "Write error on %s: %s\n", @@ -943,7 +863,7 @@ static int flash_write (int fd_current, int fd_target, int dev_target) } #ifdef DEBUG - printf ("Writing new environment at 0x%lx on %s\n", + fprintf(stderr, "Writing new environment at 0x%lx on %s\n", DEVOFFSET (dev_target), DEVNAME (dev_target)); #endif rc = flash_write_buf(dev_target, fd_target, environment.image, @@ -957,7 +877,8 @@ static int flash_write (int fd_current, int fd_target, int dev_target) off_t offset = DEVOFFSET (dev_current) + offsetof (struct env_image_redundant, flags); #ifdef DEBUG - printf ("Setting obsolete flag in environment at 0x%lx on %s\n", + fprintf(stderr, + "Setting obsolete flag in environment at 0x%lx on %s\n", DEVOFFSET (dev_current), DEVNAME (dev_current)); #endif flash_flag_obsolete (dev_current, fd_current, offset); @@ -1224,6 +1145,9 @@ int fw_env_open(void) /* Other pointers are already set */ free (addr1); } +#ifdef DEBUG + fprintf(stderr, "Selected env in %s\n", DEVNAME(dev_current)); +#endif } return 0; } diff --git a/tools/omapimage.c b/tools/omapimage.c index 5e739ac647..d242cca3a8 100644 --- a/tools/omapimage.c +++ b/tools/omapimage.c @@ -42,6 +42,18 @@ #define OMAP_GP_HDR_SIZE (sizeof(struct gp_header)) #define OMAP_FILE_HDR_SIZE (OMAP_CH_HDR_SIZE+OMAP_GP_HDR_SIZE) +static int do_swap32 = 0; + +static uint32_t omapimage_swap32(uint32_t data) +{ + uint32_t result = 0; + result = (data & 0xFF000000) >> 24; + result |= (data & 0x00FF0000) >> 8; + result |= (data & 0x0000FF00) << 8; + result |= (data & 0x000000FF) << 24; + return result; +} + static uint8_t omapimage_header[OMAP_FILE_HDR_SIZE]; static int omapimage_check_image_types(uint8_t type) @@ -80,12 +92,17 @@ static int omapimage_verify_header(unsigned char *ptr, int image_size, { struct ch_toc *toc = (struct ch_toc *)ptr; struct gp_header *gph = (struct gp_header *)(ptr+OMAP_CH_HDR_SIZE); - uint32_t offset, size; + uint32_t offset, size, gph_size, gph_load_addr; while (toc->section_offset != 0xffffffff && toc->section_size != 0xffffffff) { - offset = toc->section_offset; - size = toc->section_size; + if (do_swap32) { + offset = omapimage_swap32(toc->section_offset); + size = omapimage_swap32(toc->section_size); + } else { + offset = toc->section_offset; + size = toc->section_size; + } if (!offset || !size) return -1; if (offset >= OMAP_CH_HDR_SIZE || @@ -93,9 +110,18 @@ static int omapimage_verify_header(unsigned char *ptr, int image_size, return -1; toc++; } - if (!valid_gph_size(gph->size)) + + if (do_swap32) { + gph_size = omapimage_swap32(gph->size); + gph_load_addr = omapimage_swap32(gph->load_addr); + } else { + gph_size = gph->size; + gph_load_addr = gph->load_addr; + } + + if (!valid_gph_size(gph_size)) return -1; - if (!valid_gph_load_addr(gph->load_addr)) + if (!valid_gph_load_addr(gph_load_addr)) return -1; return 0; @@ -128,12 +154,17 @@ static void omapimage_print_header(const void *ptr) const struct ch_toc *toc = (struct ch_toc *)ptr; const struct gp_header *gph = (struct gp_header *)(ptr+OMAP_CH_HDR_SIZE); - uint32_t offset, size; + uint32_t offset, size, gph_size, gph_load_addr; while (toc->section_offset != 0xffffffff && toc->section_size != 0xffffffff) { - offset = toc->section_offset; - size = toc->section_size; + if (do_swap32) { + offset = omapimage_swap32(toc->section_offset); + size = omapimage_swap32(toc->section_size); + } else { + offset = toc->section_offset; + size = toc->section_size; + } if (offset >= OMAP_CH_HDR_SIZE || offset+size >= OMAP_CH_HDR_SIZE) @@ -148,22 +179,26 @@ static void omapimage_print_header(const void *ptr) toc++; } - if (!valid_gph_size(gph->size)) { - fprintf(stderr, - "Error: invalid image size %x\n", - gph->size); + if (do_swap32) { + gph_size = omapimage_swap32(gph->size); + gph_load_addr = omapimage_swap32(gph->load_addr); + } else { + gph_size = gph->size; + gph_load_addr = gph->load_addr; + } + + if (!valid_gph_size(gph_size)) { + fprintf(stderr, "Error: invalid image size %x\n", gph_size); exit(EXIT_FAILURE); } - if (!valid_gph_load_addr(gph->load_addr)) { - fprintf(stderr, - "Error: invalid image load address %x\n", - gph->size); + if (!valid_gph_load_addr(gph_load_addr)) { + fprintf(stderr, "Error: invalid image load address %x\n", + gph_load_addr); exit(EXIT_FAILURE); } - printf("GP Header: Size %x LoadAddr %x\n", - gph->size, gph->load_addr); + printf("GP Header: Size %x LoadAddr %x\n", gph_size, gph_load_addr); } static int toc_offset(void *hdr, void *member) @@ -194,6 +229,18 @@ static void omapimage_set_header(void *ptr, struct stat *sbuf, int ifd, gph->size = sbuf->st_size - OMAP_FILE_HDR_SIZE; gph->load_addr = params->addr; + + if (strncmp(params->imagename, "byteswap", 8) == 0) { + do_swap32 = 1; + int swapped = 0; + uint32_t *data = (uint32_t *)ptr; + + while (swapped <= (sbuf->st_size / sizeof(uint32_t))) { + *data = omapimage_swap32(*data); + swapped++; + data++; + } + } } int omapimage_check_params(struct mkimage_params *params) diff --git a/tools/patman/gitutil.py b/tools/patman/gitutil.py index 59eca99341..72d37a0b04 100644 --- a/tools/patman/gitutil.py +++ b/tools/patman/gitutil.py @@ -38,7 +38,7 @@ def CountCommitsToBranch(): Return: Number of patches that exist on top of the branch """ - pipe = [['git', 'log', '--oneline', '@{upstream}..'], + pipe = [['git', 'log', '--no-color', '--oneline', '@{upstream}..'], ['wc', '-l']] stdout = command.RunPipe(pipe, capture=True, oneline=True) patch_count = int(stdout) diff --git a/tools/patman/patchstream.py b/tools/patman/patchstream.py index 0503bac42e..f7ee75a25f 100644 --- a/tools/patman/patchstream.py +++ b/tools/patman/patchstream.py @@ -30,8 +30,8 @@ import gitutil from series import Series # Tags that we detect and remove -re_remove = re.compile('^BUG=|^TEST=|^Change-Id:|^Review URL:' - '|Reviewed-on:|Reviewed-by:') +re_remove = re.compile('^BUG=|^TEST=|^BRANCH=|^Change-Id:|^Review URL:' + '|Reviewed-on:|Reviewed-by:|Commit-Ready:') # Lines which are allowed after a TEST= line re_allowed_after_test = re.compile('^Signed-off-by:') @@ -344,7 +344,8 @@ def GetMetaData(start, count): start: Commit to start from: 0=HEAD, 1=next one, etc. count: Number of commits to list """ - pipe = [['git', 'log', '--reverse', 'HEAD~%d' % start, '-n%d' % count]] + pipe = [['git', 'log', '--no-color', '--reverse', 'HEAD~%d' % start, + '-n%d' % count]] stdout = command.RunPipe(pipe, capture=True) series = Series() ps = PatchStream(series, is_log=True) |
