diff options
79 files changed, 3625 insertions, 576 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 708ded79f6..e2441d8d31 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1191,6 +1191,7 @@ Macpaul Lin <macpaul@andestech.com> ADP-AG101 N1213 (AG101 SoC) ADP-AG101P N1213 (AG101P XC5 FPGA) + ADP-AG102 N1213f (AG102 SoC with FPU) ######################################################################### # OpenRISC Systems: # @@ -34,6 +34,7 @@ usage() CROSS_COMPILE cross-compiler toolchain prefix (default: "") MAKEALL_LOGDIR output all logs to here (default: ./LOG/) BUILD_DIR output build directory (default: ./) + BUILD_NBUILDS number of parallel targets (default: 1) Examples: - build all Power Architecture boards: @@ -178,11 +179,22 @@ else LOG_DIR="LOG" fi -if [ ! "${BUILD_DIR}" ] ; then - BUILD_DIR="." +: ${BUILD_NBUILDS:=1} +BUILD_MANY=0 + +if [ "${BUILD_NBUILDS}" -gt 1 ] ; then + BUILD_MANY=1 + : ${BUILD_DIR:=./build} + mkdir -p "${BUILD_DIR}/ERR" + find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} + fi -[ -d ${LOG_DIR} ] || mkdir ${LOG_DIR} || exit 1 +: ${BUILD_DIR:=.} + +OUTPUT_PREFIX="${BUILD_DIR}" + +[ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1 +find "${LOG_DIR}/" -type f -exec rm -f {} + LIST="" @@ -190,6 +202,8 @@ LIST="" ERR_CNT=0 ERR_LIST="" TOTAL_CNT=0 +CURRENT_CNT=0 +OLDEST_IDX=1 RC=0 # Helper funcs for parsing boards.cfg @@ -592,8 +606,26 @@ list_target() { echo "" } +# Each finished build will have a file called ${donep}${n}, +# where n is the index of the build. Each build +# we've already noted as finished will have ${skipp}${n}. +# The code managing the build process will use this information +# to ensure that only BUILD_NBUILDS builds are in flight at once +donep="${LOG_DIR}/._done_" +skipp="${LOG_DIR}/._skip_" + build_target() { target=$1 + build_idx=$2 + + if [ $BUILD_MANY == 1 ] ; then + output_dir="${OUTPUT_PREFIX}/${target}" + mkdir -p "${output_dir}" + else + output_dir="${OUTPUT_PREFIX}" + fi + + export BUILD_DIR="${output_dir}" if [ "$ONLY_LIST" == 'y' ] ; then list_target ${target} @@ -603,30 +635,75 @@ build_target() { ${MAKE} distclean >/dev/null ${MAKE} -s ${target}_config - ${MAKE} ${JOBS} all 2>&1 >${LOG_DIR}/$target.MAKELOG \ - | tee ${LOG_DIR}/$target.ERR + ${MAKE} ${JOBS} all \ + >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR # Check for 'make' errors if [ ${PIPESTATUS[0]} -ne 0 ] ; then RC=1 fi - if [ -s ${LOG_DIR}/$target.ERR ] ; then - ERR_CNT=$((ERR_CNT + 1)) - ERR_LIST="${ERR_LIST} $target" + if [ $BUILD_MANY == 1 ] ; then + ${MAKE} tidy + + if [ -s ${LOG_DIR}/${target}.ERR ] ; then + touch ${OUTPUT_PREFIX}/ERR/${target} + else + rm ${LOG_DIR}/${target}.ERR + fi else - rm ${LOG_DIR}/$target.ERR + if [ -s ${LOG_DIR}/${target}.ERR ] ; then + : $(( ERR_CNT += 1 )) + ERR_LIST="${ERR_LIST} $target" + else + rm ${LOG_DIR}/${target}.ERR + fi fi - TOTAL_CNT=$((TOTAL_CNT + 1)) - - OBJS=${BUILD_DIR}/u-boot - if [ -e ${BUILD_DIR}/spl/u-boot-spl ]; then - OBJS="${OBJS} ${BUILD_DIR}/spl/u-boot-spl" + OBJS=${output_dir}/u-boot + if [ -e ${output_dir}/spl/u-boot-spl ]; then + OBJS="${OBJS} ${output_dir}/spl/u-boot-spl" fi ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG + + [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR" + + #echo "Writing ${donep}${build_idx}" + touch "${donep}${build_idx}" } + +manage_builds() { + search_idx=${OLDEST_IDX} + #echo "Searching ${OLDEST_IDX} to ${TOTAL_CNT}" + while true; do + if [ -e "${donep}${search_idx}" ] ; then + # echo "Found ${donep}${search_idx}" + : $(( CURRENT_CNT-- )) + [ ${OLDEST_IDX} -eq ${search_idx} ] && + : $(( OLDEST_IDX++ )) + + # Only want to count it once + rm -f "${donep}${search_idx}" + touch "${skipp}${search_idx}" + elif [ -e "${skipp}${search_idx}" ] ; then + [ ${OLDEST_IDX} -eq ${search_idx} ] && + : $(( OLDEST_IDX++ )) + fi + #echo "Checking search ${search_idx} vs ${TOTAL_CNT}" + : $(( search_idx++ )) + if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then + #echo "Checking current ${CURRENT_CNT} vs ${BUILD_NBUILDS}" + if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then + search_idx=${OLDEST_IDX} + sleep 1 + else + break + fi + fi + done +} + build_targets() { for t in "$@" ; do # If a LIST_xxx var exists, use it. But avoid variable @@ -639,7 +716,26 @@ build_targets() { if [ -n "${list}" ] ; then build_targets ${list} else - build_target ${t} + : $((TOTAL_CNT += 1)) + : $((CURRENT_CNT += 1)) + rm -f "${donep}${TOTAL_CNT}" + rm -f "${skipp}${TOTAL_CNT}" + build_target ${t} ${TOTAL_CNT} & + fi + + # We maintain a running count of all the builds we have done. + # Each finished build will have a file called ${donep}${n}, + # where n is the index of the build. Each build + # we've already noted as finished will have ${skipp}${n}. + # We track the current index via TOTAL_CNT, and the oldest + # index. When we exceed the maximum number of parallel builds, + # We look from oldest to current for builds that have completed, + # and update the current count and oldest index as appropriate. + # If we've gone through the entire list, wait a second, and + # reprocess the entire list until we find a build that has + # completed + if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then + manage_builds fi done } @@ -648,6 +744,16 @@ build_targets() { print_stats() { if [ "$ONLY_LIST" == 'y' ] ; then return ; fi + + rm -f ${donep}* ${skipp}* + + if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then + ERR_LIST=$(ls ${OUTPUT_PREFIX}/ERR/) + ERR_CNT=`ls -1 ${OUTPUT_PREFIX}/ERR/ | wc | awk '{print $1}'` + else + ERR_CNT=0 + fi + echo "" echo "--------------------- SUMMARY ----------------------------" echo "Boards compiled: ${TOTAL_CNT}" @@ -666,3 +772,4 @@ set -- ${SELECTED} "$@" # run PowerPC by default [ $# = 0 ] && set -- powerpc build_targets "$@" +wait @@ -3026,6 +3026,24 @@ to save the current settings. environment area within the total memory of your DataFlash placed at the specified address. +- CONFIG_ENV_IS_IN_REMOTE: + + Define this if you have a remote memory space which you + want to use for the local device's environment. + + - CONFIG_ENV_ADDR: + - CONFIG_ENV_SIZE: + + These two #defines specify the address and size of the + environment area within the remote memory space. The + local device can get the environment from remote memory + space by SRIO or other links. + +BE CAREFUL! For some special cases, the local device can not use +"saveenv" command. For example, the local device will get the +environment stored in a remote NOR flash by SRIO link, but it can +not erase, write this NOR flash by SRIO interface. + - CONFIG_ENV_IS_IN_NAND: Define this if you have a NAND device which you want to use @@ -3462,6 +3480,12 @@ within that device. Specifies that QE/FMAN firmware is located on the primary SPI device. CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device. +- CONFIG_SYS_QE_FMAN_FW_IN_REMOTE + Specifies that QE/FMAN firmware is located in the remote (master) + memory space. CONFIG_SYS_FMAN_FW_ADDR is a virtual address which + can be mapped from slave TLB->slave LAW->slave SRIO outbound window + ->master inbound window->master LAW->the ucode address in master's + NOR flash. Building the Software: ====================== diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h index 1a8de4906d..25cd833865 100644 --- a/arch/blackfin/include/asm/config.h +++ b/arch/blackfin/include/asm/config.h @@ -109,14 +109,8 @@ #ifndef CONFIG_SYS_MALLOC_BASE # define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN) #endif -#ifndef CONFIG_SYS_GBL_DATA_ADDR -# define CONFIG_SYS_GBL_DATA_ADDR (CONFIG_SYS_MALLOC_BASE - GENERATED_GBL_DATA_SIZE) -#endif -#ifndef CONFIG_SYS_BD_INFO_ADDR -# define CONFIG_SYS_BD_INFO_ADDR (CONFIG_SYS_GBL_DATA_ADDR - GENERATED_BD_INFO_SIZE) -#endif #ifndef CONFIG_STACKBASE -# define CONFIG_STACKBASE (CONFIG_SYS_BD_INFO_ADDR - 4) +# define CONFIG_STACKBASE (CONFIG_SYS_MALLOC_BASE - 4) #endif #ifndef CONFIG_SYS_MEMTEST_START # define CONFIG_SYS_MEMTEST_START 0 diff --git a/arch/blackfin/include/asm/global_data.h b/arch/blackfin/include/asm/global_data.h index 67aa30f04c..973ea2929a 100644 --- a/arch/blackfin/include/asm/global_data.h +++ b/arch/blackfin/include/asm/global_data.h @@ -73,6 +73,6 @@ typedef struct global_data { #define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */ #define GD_FLG_ENV_READY 0x00080 /* Environment imported into hash table */ -#define DECLARE_GLOBAL_DATA_PTR register gd_t * volatile gd asm ("P3") +#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("P3") #endif diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index e3ee4cd353..2d424a2da0 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -181,6 +181,46 @@ void init_cplbtables(void) } } +static int global_board_data_init(void) +{ +#ifndef CONFIG_SYS_GBL_DATA_ADDR +# define CONFIG_SYS_GBL_DATA_ADDR 0 +#endif +#ifndef CONFIG_SYS_BD_INFO_ADDR +# define CONFIG_SYS_BD_INFO_ADDR 0 +#endif + + bd_t *bd; + + if (CONFIG_SYS_GBL_DATA_ADDR) { + gd = (gd_t *) (CONFIG_SYS_GBL_DATA_ADDR); + memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE); + } else { + static gd_t _bfin_gd; + gd = &_bfin_gd; + } + + if (CONFIG_SYS_BD_INFO_ADDR) { + bd = (bd_t *) (CONFIG_SYS_BD_INFO_ADDR); + memset(bd, 0, GENERATED_BD_INFO_SIZE); + } else { + static bd_t _bfin_bd; + bd = &_bfin_bd; + } + gd->bd = bd; + + bd->bi_r_version = version_string; + bd->bi_cpu = MK_STR(CONFIG_BFIN_CPU); + bd->bi_board_name = BFIN_BOARD_NAME; + bd->bi_vco = get_vco(); + bd->bi_cclk = get_cclk(); + bd->bi_sclk = get_sclk(); + bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; + bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; + + return 0; +} + /* * All attempts to come up with a "common" initialization sequence * that works for all boards and architectures failed: some of the @@ -201,7 +241,6 @@ extern int timer_init(void); void board_init_f(ulong bootflag) { - bd_t *bd; char buf[32]; #ifdef CONFIG_BOARD_EARLY_INIT_F @@ -234,21 +273,8 @@ void board_init_f(ulong bootflag) hang(); #endif serial_early_puts("Init global data\n"); - gd = (gd_t *) (CONFIG_SYS_GBL_DATA_ADDR); - memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE); - - bd = (bd_t *) (CONFIG_SYS_BD_INFO_ADDR); - gd->bd = bd; - memset((void *)bd, 0, GENERATED_BD_INFO_SIZE); - bd->bi_r_version = version_string; - bd->bi_cpu = MK_STR(CONFIG_BFIN_CPU); - bd->bi_board_name = BFIN_BOARD_NAME; - bd->bi_vco = get_vco(); - bd->bi_cclk = get_cclk(); - bd->bi_sclk = get_sclk(); - bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; - bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; + global_board_data_init(); /* Initialize */ serial_early_puts("IRQ init\n"); @@ -276,7 +302,7 @@ void board_init_f(ulong bootflag) if (CONFIG_MEM_SIZE) { printf("RAM: "); - print_size(bd->bi_memsize, "\n"); + print_size(gd->bd->bi_memsize, "\n"); } #if defined(CONFIG_POST) diff --git a/arch/nds32/cpu/n1213/ag102/Makefile b/arch/nds32/cpu/n1213/ag102/Makefile new file mode 100644 index 0000000000..8716c4e858 --- /dev/null +++ b/arch/nds32/cpu/n1213/ag102/Makefile @@ -0,0 +1,58 @@ +# +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <prafulla@marvell.com> +# +# Copyright (C) 2011 Andes Technology Corporation +# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> +# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).o + +COBJS-y := cpu.o timer.o + +ifndef CONFIG_SKIP_LOWLEVEL_INIT +SOBJS := lowlevel_init.o +endif + +ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG +SOBJS += watchdog.o +endif + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/nds32/cpu/n1213/ag102/asm-offsets.c b/arch/nds32/cpu/n1213/ag102/asm-offsets.c new file mode 100644 index 0000000000..4769a9521d --- /dev/null +++ b/arch/nds32/cpu/n1213/ag102/asm-offsets.c @@ -0,0 +1,54 @@ +/* + * Adapted from Linux v2.6.36 kernel: arch/powerpc/kernel/asm-offsets.c + * + * Generate definitions needed by assembly language modules. + * This code generates raw asm output which is post-processed to extract + * and format the required data. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <common.h> + +#include <linux/kbuild.h> + +int main(void) +{ +#ifdef CONFIG_FTSMC020 + OFFSET(FTSMC020_BANK0_CR, ftsmc020, bank[0].cr); + OFFSET(FTSMC020_BANK0_TPR, ftsmc020, bank[0].tpr); +#endif + BLANK(); +#ifdef CONFIG_FTAHBC020S + OFFSET(FTAHBC020S_SLAVE_BSR_6, ftahbc02s, s_bsr[6]); + OFFSET(FTAHBC020S_CR, ftahbc02s, cr); +#endif + BLANK(); +#ifdef CONFIG_ANDES_PCU + OFFSET(ANDES_PCU_PCS4, andes_pcu, pcs4.parm); /* 0x104 */ +#endif + BLANK(); +#ifdef CONFIG_DWCDDR21MCTL + OFFSET(DWCDDR21MCTL_CCR, dwcddr21mctl, ccr); /* 0x04 */ + OFFSET(DWCDDR21MCTL_DCR, dwcddr21mctl, dcr); /* 0x04 */ + OFFSET(DWCDDR21MCTL_IOCR, dwcddr21mctl, iocr); /* 0x08 */ + OFFSET(DWCDDR21MCTL_CSR, dwcddr21mctl, csr); /* 0x0c */ + OFFSET(DWCDDR21MCTL_DRR, dwcddr21mctl, drr); /* 0x10 */ + OFFSET(DWCDDR21MCTL_DLLCR0, dwcddr21mctl, dllcr[0]); /* 0x24 */ + OFFSET(DWCDDR21MCTL_DLLCR1, dwcddr21mctl, dllcr[1]); /* 0x28 */ + OFFSET(DWCDDR21MCTL_DLLCR2, dwcddr21mctl, dllcr[2]); /* 0x2c */ + OFFSET(DWCDDR21MCTL_DLLCR3, dwcddr21mctl, dllcr[3]); /* 0x30 */ + OFFSET(DWCDDR21MCTL_DLLCR4, dwcddr21mctl, dllcr[4]); /* 0x34 */ + OFFSET(DWCDDR21MCTL_DLLCR5, dwcddr21mctl, dllcr[5]); /* 0x38 */ + OFFSET(DWCDDR21MCTL_DLLCR6, dwcddr21mctl, dllcr[6]); /* 0x3c */ + OFFSET(DWCDDR21MCTL_DLLCR7, dwcddr21mctl, dllcr[7]); /* 0x40 */ + OFFSET(DWCDDR21MCTL_DLLCR8, dwcddr21mctl, dllcr[8]); /* 0x44 */ + OFFSET(DWCDDR21MCTL_DLLCR9, dwcddr21mctl, dllcr[9]); /* 0x48 */ + OFFSET(DWCDDR21MCTL_RSLR0, dwcddr21mctl, rslr[0]); /* 0x4c */ + OFFSET(DWCDDR21MCTL_RDGR0, dwcddr21mctl, rdgr[0]); /* 0x5c */ + OFFSET(DWCDDR21MCTL_DTAR, dwcddr21mctl, dtar); /* 0xa4 */ + OFFSET(DWCDDR21MCTL_MR, dwcddr21mctl, mr); /* 0x1f0 */ +#endif + return 0; +} diff --git a/arch/nds32/cpu/n1213/ag102/cpu.c b/arch/nds32/cpu/n1213/ag102/cpu.c new file mode 100644 index 0000000000..ed88b522a4 --- /dev/null +++ b/arch/nds32/cpu/n1213/ag102/cpu.c @@ -0,0 +1,195 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * Copyright (C) 2011 Andes Technology Corporation + * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* CPU specific code */ +#include <common.h> +#include <command.h> +#include <watchdog.h> +#include <asm/cache.h> + +#include <faraday/ftwdt010_wdt.h> + +/* + * cleanup_before_linux() is called just before we call linux + * it prepares the processor for linux + * + * we disable interrupt and caches. + */ +int cleanup_before_linux(void) +{ + disable_interrupts(); + +#ifdef CONFIG_MMU + /* turn off I/D-cache */ + icache_disable(); + dcache_disable(); + + /* flush I/D-cache */ + invalidate_icac(); + invalidate_dcac(); +#endif + + return 0; +} + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + disable_interrupts(); + + /* + * reset to the base addr of andesboot. + * currently no ROM loader at addr 0. + * do not use reset_cpu(0); + */ +#ifdef CONFIG_FTWDT010_WATCHDOG + /* + * workaround: if we use CONFIG_HW_WATCHDOG with ftwdt010, will lead + * automatic hardware reset when booting Linux. + * Please do not use CONFIG_HW_WATCHDOG and WATCHDOG_RESET() here. + */ + ftwdt010_wdt_reset(); +#endif /* CONFIG_FTWDT010_WATCHDOG */ + hang(); + + /*NOTREACHED*/ +} + +static inline unsigned long CACHE_LINE_SIZE(enum cache_t cache) +{ + if (cache == ICACHE) + return 8 << (((GET_ICM_CFG() & ICM_CFG_MSK_ISZ) \ + >> ICM_CFG_OFF_ISZ) - 1); + else + return 8 << (((GET_DCM_CFG() & DCM_CFG_MSK_DSZ) \ + >> DCM_CFG_OFF_DSZ) - 1); +} + +void dcache_flush_range(unsigned long start, unsigned long end) +{ + unsigned long line_size; + + line_size = CACHE_LINE_SIZE(DCACHE); + + while (end > start) { + __asm__ volatile ("\n\tcctl %0, L1D_VA_WB" : : "r"(start)); + __asm__ volatile ("\n\tcctl %0, L1D_VA_INVAL" : : "r"(start)); + start += line_size; + } +} + +void icache_inval_range(unsigned long start, unsigned long end) +{ + unsigned long line_size; + + line_size = CACHE_LINE_SIZE(ICACHE); + while (end > start) { + __asm__ volatile ("\n\tcctl %0, L1I_VA_INVAL" : : "r"(start)); + start += line_size; + } +} + +void flush_cache(unsigned long addr, unsigned long size) +{ + dcache_flush_range(addr, addr + size); + icache_inval_range(addr, addr + size); +} + +void icache_enable(void) +{ + __asm__ __volatile__ ( + "mfsr $p0, $mr8\n\t" + "ori $p0, $p0, 0x01\n\t" + "mtsr $p0, $mr8\n\t" + "isb\n\t" + ); +} + +void icache_disable(void) +{ + __asm__ __volatile__ ( + "mfsr $p0, $mr8\n\t" + "li $p1, ~0x01\n\t" + "and $p0, $p0, $p1\n\t" + "mtsr $p0, $mr8\n\t" + "isb\n\t" + ); +} + +int icache_status(void) +{ + int ret; + + __asm__ __volatile__ ( + "mfsr $p0, $mr8\n\t" + "andi %0, $p0, 0x01\n\t" + : "=r" (ret) + : + : "memory" + ); + + return ret; +} + +void dcache_enable(void) +{ + __asm__ __volatile__ ( + "mfsr $p0, $mr8\n\t" + "ori $p0, $p0, 0x02\n\t" + "mtsr $p0, $mr8\n\t" + "isb\n\t" + ); +} + +void dcache_disable(void) +{ + __asm__ __volatile__ ( + "mfsr $p0, $mr8\n\t" + "li $p1, ~0x02\n\t" + "and $p0, $p0, $p1\n\t" + "mtsr $p0, $mr8\n\t" + "isb\n\t" + ); +} + +int dcache_status(void) +{ + int ret; + + __asm__ __volatile__ ( + "mfsr $p0, $mr8\n\t" + "andi %0, $p0, 0x02\n\t" + : "=r" (ret) + : + : "memory" + ); + + return ret; +} diff --git a/arch/nds32/cpu/n1213/ag102/lowlevel_init.S b/arch/nds32/cpu/n1213/ag102/lowlevel_init.S new file mode 100644 index 0000000000..d842afa4ba --- /dev/null +++ b/arch/nds32/cpu/n1213/ag102/lowlevel_init.S @@ -0,0 +1,297 @@ +/* + * Copyright (C) 2011 Andes Technology Corporation + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +.text + +#include <common.h> +#include <config.h> + +#include <asm/macro.h> +#include <generated/asm-offsets.h> + +/* + * parameters for Synopsys DWC DDR2/DDR1 Memory Controller + */ +#define DDR2C_BASE_A (CONFIG_DWCDDR21MCTL_BASE) +#define DDR2C_CCR_A (DDR2C_BASE_A + DWCDDR21MCTL_CCR) +#define DDR2C_DCR_A (DDR2C_BASE_A + DWCDDR21MCTL_DCR) +#define DDR2C_IOCR_A (DDR2C_BASE_A + DWCDDR21MCTL_IOCR) +#define DDR2C_CSR_A (DDR2C_BASE_A + DWCDDR21MCTL_CSR) +#define DDR2C_DRR_A (DDR2C_BASE_A + DWCDDR21MCTL_DRR) +#define DDR2C_DLLCR0_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR0) +#define DDR2C_DLLCR1_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR1) +#define DDR2C_DLLCR2_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR2) +#define DDR2C_DLLCR3_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR3) +#define DDR2C_DLLCR4_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR4) +#define DDR2C_DLLCR5_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR5) +#define DDR2C_DLLCR6_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR6) +#define DDR2C_DLLCR7_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR7) +#define DDR2C_DLLCR8_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR8) +#define DDR2C_DLLCR9_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR9) +#define DDR2C_RSLR0_A (DDR2C_BASE_A + DWCDDR21MCTL_RSLR0) +#define DDR2C_RDGR0_A (DDR2C_BASE_A + DWCDDR21MCTL_RDGR0) +#define DDR2C_DTAR_A (DDR2C_BASE_A + DWCDDR21MCTL_DTAR) +#define DDR2C_MR_A (DDR2C_BASE_A + DWCDDR21MCTL_MR) + +#define DDR2C_CCR_D CONFIG_SYS_DWCDDR21MCTL_CCR +#define DDR2C_CCR_D2 CONFIG_SYS_DWCDDR21MCTL_CCR2 +#define DDR2C_DCR_D CONFIG_SYS_DWCDDR21MCTL_DCR +#define DDR2C_IOCR_D CONFIG_SYS_DWCDDR21MCTL_IOCR +#define DDR2C_CSR_D CONFIG_SYS_DWCDDR21MCTL_CSR +#define DDR2C_DRR_D CONFIG_SYS_DWCDDR21MCTL_DRR +#define DDR2C_RSLR0_D CONFIG_SYS_DWCDDR21MCTL_RSLR0 +#define DDR2C_RDGR0_D CONFIG_SYS_DWCDDR21MCTL_RDGR0 +#define DDR2C_DTAR_D CONFIG_SYS_DWCDDR21MCTL_DTAR +#define DDR2C_MR_D CONFIG_SYS_DWCDDR21MCTL_MR + +#define DDR2C_DLLCR0_D CONFIG_SYS_DWCDDR21MCTL_DLLCR0 /* 0-9 are same */ + +/* + * parameters for the ahbc controller + */ +#define AHBC_CR_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_CR) +#define AHBC_BSR6_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_6) + +#define AHBC_BSR6_D CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 + +/* + * parameters for the ANDES PCU controller + */ +#define PCU_PCS4_A (CONFIG_ANDES_PCU_BASE + ANDES_PCU_PCS4) +#define PCU_PCS4_D CONFIG_SYS_ANDES_CPU_PCS4 + +/* + * numeric 7 segment display + */ +.macro led, num + write32 CONFIG_DEBUG_LED, \num +.endm + +/* + * Waiting for SDRAM to set up + */ +/* +.macro wait_sdram + li $r0, DDR2C_CSR_A +1: + lwi $r1, [$r0+FTSDMC021_CR2] + bnez $r1, 1b +.endm +*/ + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +.globl lowlevel_init +lowlevel_init: + move $r10, $lp + + /* U200 */ +! led 0x00 +! jal scale_to_500mhz + + led 0x10 + jal mem_init + + led 0x20 + jal remap + + led 0x30 + ret $r10 + +scale_to_500mhz: + move $r11, $lp + + /* + * scale to 500Mhz + */ + led 0x01 + write32 PCU_PCS4_A, 0x1102000f ! save data to PCS4 + + move $lp, $r11 + ret + +mem_init: + move $r11, $lp + + /* + * config AHB Controller + */ + led 0x12 + write32 AHBC_BSR6_A, AHBC_BSR6_D + + /* + * config Synopsys DWC DDR2/DDR1 Memory Controller + */ +ddr2c_init: +set_dcr: + led 0x14 + write32 DDR2C_DCR_A, DDR2C_DCR_D ! 0x000020d4 + +auto_sizing: + /* + * ebios: $r10->$r7, $r11->$r8, $r12->$r9, $r13->$r12, $r14->$r13 + */ +set_iocr: + led 0x19 + write32 DDR2C_IOCR_A, DDR2C_IOCR_D +set_drr: + led 0x16 + write32 DDR2C_DRR_A, DDR2C_DRR_D ! 0x00034812 +set_dllcr: + led 0x18 + write32 DDR2C_DLLCR0_A, DDR2C_DLLCR0_D + write32 DDR2C_DLLCR1_A, DDR2C_DLLCR0_D + write32 DDR2C_DLLCR2_A, DDR2C_DLLCR0_D + write32 DDR2C_DLLCR3_A, DDR2C_DLLCR0_D + write32 DDR2C_DLLCR4_A, DDR2C_DLLCR0_D + write32 DDR2C_DLLCR5_A, DDR2C_DLLCR0_D + write32 DDR2C_DLLCR6_A, DDR2C_DLLCR0_D + write32 DDR2C_DLLCR7_A, DDR2C_DLLCR0_D + write32 DDR2C_DLLCR8_A, DDR2C_DLLCR0_D + write32 DDR2C_DLLCR9_A, DDR2C_DLLCR0_D +set_rslr0: + write32 DDR2C_RSLR0_A, DDR2C_RSLR0_D ! 0x00000040 +set_rdgr0: + write32 DDR2C_RDGR0_A, DDR2C_RDGR0_D ! 0x000055cf +set_dtar: + led 0x15 + write32 DDR2C_DTAR_A, DDR2C_DTAR_D ! 0x00100000 +set_mode: + led 0x17 + write32 DDR2C_MR_A, DDR2C_MR_D ! 0x00000852 +set_ccr: + write32 DDR2C_CCR_A, DDR2C_CCR_D + +#ifdef TRIGGER_INIT: +trigger_init: + write32 DDR2C_CCR_A, DDR2C_CCR_D ! 0x80020000 + + /* Wait for ddr init state to be set */ + msync ALL + isb + + /* Wait until the config initialization is finish */ +1: + la $r4, DDR2C_CSR_A + lwi $r5, [$r4] + srli $r5, $r5, 23 + bnez $r5, 1b +#endif + +data_training: +! write32 DDR2C_CCR_A, DDR2C_CCR_D2 ! 0x40020004 + + /* Wait for ddr init state to be set */ + msync ALL + isb + + /* wait until the ddr data trainning is complete */ +1: + la $r4, DDR2C_CSR_A + lwi $r5, [$r4] + srli $r6, $r5, 23 + bnez $r6, 1b + + lwi $r1, [$r4] + srli $r6, $r5, 20 + li $r5, 0x00ffffff + swi $r1, [$r4] + bnez $r6, ddr2c_init + + led 0x1a + move $lp, $r11 + ret + +remap: + move $r11, $lp +#ifdef __NDS32_N1213_43U1H__ /* NDS32 V0 ISA - AG101 Only */ + bal 2f +relo_base: + move $r0, $lp +#else +relo_base: + mfusr $r0, $pc +#endif /* __NDS32_N1213_43U1H__ */ + + /* + * Remapping + */ +#ifdef CONFIG_MEM_REMAP + /* + * Copy ROM code to SDRAM base for memory remap layout. + * This is not the real relocation, the real relocation is the function + * relocate_code() is start.S which supports the systems is memory + * remapped or not. + */ + /* + * Doing memory remap is essential for preparing some non-OS or RTOS + * applications. + * + * This is also a must on ADP-AG101 board. + * The reason is because the ROM/FLASH circuit on PCB board. + * AG101-A0 board has 2 jumpers MA17 and SW5 to configure which + * ROM/FLASH is used to boot. + * + * When SW5 = "0101", MA17 = LO, the ROM is connected to BANK0, + * and the FLASH is connected to BANK1. + * When SW5 = "1010", MA17 = HI, the ROM is disabled (still at BANK0), + * and the FLASH is connected to BANK0. + * It will occur problem when doing flash probing if the flash is at + * BANK0 (0x00000000) while memory remapping was skipped. + * + * Other board like ADP-AG101P may not enable this since there is only + * a FLASH connected to bank0. + */ + led 0x21 + li $r4, PHYS_SDRAM_0_AT_INIT /* 0x10000000 */ + li $r5, 0x0 + la $r1, relo_base /* get $pc or $lp */ + sub $r2, $r0, $r1 + sethi $r6, hi20(_end) + ori $r6, $r6, lo12(_end) + add $r6, $r6, $r2 +1: + lwi.p $r7, [$r5], #4 + swi.p $r7, [$r4], #4 + blt $r5, $r6, 1b + + /* set remap bit */ + /* + * MEM remap bit is operational + * - use it to map writeable memory at 0x00000000, in place of flash + * - before remap: flash/rom 0x00000000, sdram: 0x10000000-0x4fffffff + * - after remap: flash/rom 0x80000000, sdram: 0x00000000 + */ + led 0x2c + setbf15 AHBC_CR_A, FTAHBC020S_CR_REMAP ! 0x1 + +#endif /* #ifdef CONFIG_MEM_REMAP */ + move $lp, $r11 +2: + ret + +.globl show_led +show_led: + li $r8, (CONFIG_DEBUG_LED) + swi $r7, [$r8] + ret +#endif /* #ifndef CONFIG_SKIP_LOWLEVEL_INIT */ diff --git a/arch/nds32/cpu/n1213/ag102/timer.c b/arch/nds32/cpu/n1213/ag102/timer.c new file mode 100644 index 0000000000..caa36b8be8 --- /dev/null +++ b/arch/nds32/cpu/n1213/ag102/timer.c @@ -0,0 +1,205 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <ratbert@faraday-tech.com> + * + * Copyright (C) 2011 Andes Technology Corporation + * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> +#include <faraday/fttmr010.h> + +static ulong timestamp; +static ulong lastdec; + +int timer_init(void) +{ + struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; + unsigned int cr; + + debug("%s()\n", __func__); + + /* disable timers */ + writel(0, &tmr->cr); + +#ifdef CONFIG_FTTMR010_EXT_CLK + /* use 32768Hz oscillator for RTC, WDT, TIMER */ + ftpmu010_32768osc_enable(); +#endif + + /* setup timer */ + writel(TIMER_LOAD_VAL, &tmr->timer3_load); + writel(TIMER_LOAD_VAL, &tmr->timer3_counter); + writel(0, &tmr->timer3_match1); + writel(0, &tmr->timer3_match2); + + /* we don't want timer to issue interrupts */ + writel(FTTMR010_TM3_MATCH1 | + FTTMR010_TM3_MATCH2 | + FTTMR010_TM3_OVERFLOW, + &tmr->interrupt_mask); + + cr = readl(&tmr->cr); +#ifdef CONFIG_FTTMR010_EXT_CLK + cr |= FTTMR010_TM3_CLOCK; /* use external clock */ +#endif + cr |= FTTMR010_TM3_ENABLE; + writel(cr, &tmr->cr); + + /* init the timestamp and lastdec value */ + reset_timer_masked(); + + return 0; +} + +/* + * timer without interrupts + */ + +/* + * reset time + */ +void reset_timer_masked(void) +{ + struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; + + /* capure current decrementer value time */ +#ifdef CONFIG_FTTMR010_EXT_CLK + lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ); +#else + lastdec = readl(&tmr->timer3_counter) / (CONFIG_SYS_CLK_FREQ / 2); +#endif + timestamp = 0; /* start "advancing" time stamp from 0 */ + + debug("%s(): lastdec = %lx\n", __func__, lastdec); +} + +void reset_timer(void) +{ + debug("%s()\n", __func__); + reset_timer_masked(); +} + +/* + * return timer ticks + */ +ulong get_timer_masked(void) +{ + struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; + + /* current tick value */ +#ifdef CONFIG_FTTMR010_EXT_CLK + ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ); +#else + ulong now = readl(&tmr->timer3_counter) / \ + (CONFIG_SYS_CLK_FREQ / 2 / 1024); +#endif + + debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec); + + if (lastdec >= now) { + /* + * normal mode (non roll) + * move stamp fordward with absoulte diff ticks + */ + timestamp += lastdec - now; + } else { + /* + * we have overflow of the count down timer + * + * nts = ts + ld + (TLV - now) + * ts=old stamp, ld=time that passed before passing through -1 + * (TLV-now) amount of time after passing though -1 + * nts = new "advancing time stamp"...it could also roll and + * cause problems. + */ + timestamp += lastdec + TIMER_LOAD_VAL - now; + } + + lastdec = now; + + debug("%s() returns %lx\n", __func__, timestamp); + + return timestamp; +} + +/* + * return difference between timer ticks and base + */ +ulong get_timer(ulong base) +{ + debug("%s(%lx)\n", __func__, base); + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ + debug("%s(%lx)\n", __func__, t); + timestamp = t; +} + +/* delay x useconds AND preserve advance timestamp value */ +void __udelay(unsigned long usec) +{ + struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; + +#ifdef CONFIG_FTTMR010_EXT_CLK + long tmo = usec * (TIMER_CLOCK / 1000) / 1000; +#else + long tmo = usec * ((CONFIG_SYS_CLK_FREQ / 2) / 1000) / 1000; +#endif + unsigned long now, last = readl(&tmr->timer3_counter); + + debug("%s(%lu)\n", __func__, usec); + while (tmo > 0) { + now = readl(&tmr->timer3_counter); + if (now > last) /* count down timer overflow */ + tmo -= TIMER_LOAD_VAL + last - now; + else + tmo -= last - now; + last = now; + } +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + debug("%s()\n", __func__); + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + debug("%s()\n", __func__); +#ifdef CONFIG_FTTMR010_EXT_CLK + return CONFIG_SYS_HZ; +#else + return CONFIG_SYS_CLK_FREQ; +#endif +} diff --git a/arch/nds32/cpu/n1213/ag102/watchdog.S b/arch/nds32/cpu/n1213/ag102/watchdog.S new file mode 100644 index 0000000000..56cecda78f --- /dev/null +++ b/arch/nds32/cpu/n1213/ag102/watchdog.S @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2011 Andes Technology Corporation + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch-ag102/ag102.h> +#include <linux/linkage.h> + +.text + +#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG +ENTRY(turnoff_watchdog) + +#define WD_CR 0xC +#define WD_ENABLE 0x1 + + ! Turn off the watchdog, according to Faraday FTWDT010 spec + li $p0, (CONFIG_FTWDT010_BASE+WD_CR) ! Get the addr of WD CR + lwi $p1, [$p0] ! Get the config of WD + andi $p1, $p1, 0x1f ! Wipe out useless bits + li $r0, ~WD_ENABLE + and $p1, $p1, $r0 ! Set WD disable + sw $p1, [$p0] ! Write back to WD CR + + ! Disable Interrupts by clear GIE in $PSW reg + setgie.d + + ret + +ENDPROC(turnoff_watchdog) +#endif diff --git a/arch/nds32/include/asm/arch-ag102/ag102.h b/arch/nds32/include/asm/arch-ag102/ag102.h new file mode 100644 index 0000000000..a12a8c52b7 --- /dev/null +++ b/arch/nds32/include/asm/arch-ag102/ag102.h @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2011 Andes Technology Corporation + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __AG102_H +#define __AG102_H + +/* + * Hardware register bases + */ + +/* PCI Controller */ +#define CONFIG_FTPCI100_BASE 0x90000000 +/* LPC Controller */ +#define CONFIG_LPC_IO_BASE 0x90100000 +/* LPC Controller */ +#define CONFIG_LPC_BASE 0x90200000 + +/* NDS32 Data Local Memory 01 */ +#define CONFIG_NDS_DLM1_BASE 0x90300000 +/* NDS32 Data Local Memory 02 */ +#define CONFIG_NDS_DLM2_BASE 0x90400000 + +/* Synopsys DWC DDR2/1 Controller */ +#define CONFIG_DWCDDR21MCTL_BASE 0x90500000 +/* DMA Controller */ +#define CONFIG_FTDMAC020_BASE 0x90600000 +/* FTIDE020_S IDE (ATA) Controller */ +#define CONFIG_FTIDE020S_BASE 0x90700000 +/* USB OTG Controller */ +#define CONFIG_FZOTG266HD0A_BASE 0x90800000 +/* Andes L2 Cache Controller */ +#define CONFIG_NCEL2C100_BASE 0x90900000 +/* XGI XG22 GPU */ +#define CONFIG_XGI_XG22_BASE 0x90A00000 +/* GMAC Ethernet Controller */ +#define CONFIG_FTGMAC100_BASE 0x90B00000 +/* AHB Controller */ +#define CONFIG_FTAHBC020S_BASE 0x90C00000 +/* AHB-to-APB Bridge Controller */ +#define CONFIG_FTAPBBRG020S_01_BASE 0x90D00000 +/* External AHB2AHB Controller */ +#define CONFIG_EXT_AHB2AHB_BASE 0x90E00000 +/* Andes Multi-core Interrupt Controller */ +#define CONFIG_NCEMIC100_BASE 0x90F00000 + +/* + * APB Device definitions + */ +/* Compat Flash Controller */ +#define CONFIG_FTCFC010_BASE 0x94000000 +/* APB - SSP (SPI) (without AC97) Controller */ +#define CONFIG_FTSSP010_01_BASE 0x94100000 +/* UART1 - APB STUART Controller (UART0 in Linux) */ +#define CONFIG_FTUART010_01_BASE 0x94200000 +/* FTSDC010 SD Controller */ +#define CONFIG_FTSDC010_BASE 0x94400000 +/* APB - SSP with HDA/AC97 Controller */ +#define CONFIG_FTSSP010_02_BASE 0x94500000 +/* UART2 - APB STUART Controller (UART1 in Linux) */ +#define CONFIG_FTUART010_02_BASE 0x94600000 +/* PCU Controller */ +#define CONFIG_ANDES_PCU_BASE 0x94800000 +/* FTTMR010 Timer */ +#define CONFIG_FTTMR010_BASE 0x94900000 +/* Watch Dog Controller */ +#define CONFIG_FTWDT010_BASE 0x94A00000 +/* FTRTC010 Real Time Clock */ +#define CONFIG_FTRTC010_BASE 0x98B00000 +/* GPIO Controller */ +#define CONFIG_FTGPIO010_BASE 0x94C00000 +/* I2C Controller */ +#define CONFIG_FTIIC010_BASE 0x94E00000 +/* PWM - Pulse Width Modulator Controller */ +#define CONFIG_FTPWM010_BASE 0x94F00000 + +/* Debug LED */ +#define CONFIG_DEBUG_LED 0x902FFFFC +/* Power Management Unit */ +#define CONFIG_FTPMU010_BASE 0x98100000 + +#endif /* __AG102_H */ diff --git a/arch/nds32/include/asm/mach-types.h b/arch/nds32/include/asm/mach-types.h index 7b52b989bc..259e4e7ad9 100644 --- a/arch/nds32/include/asm/mach-types.h +++ b/arch/nds32/include/asm/mach-types.h @@ -40,4 +40,18 @@ extern unsigned int __machine_arch_type; # define machine_is_adpag101p() (1) #endif +#define MACH_TYPE_ADPAG102 2 + +#ifdef CONFIG_ARCH_ADPAG102 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ADPAG102 +# endif +# define machine_is_adpag102() (machine_arch_type == MACH_TYPE_ADPAG102) +#else +# define machine_is_adpag102() (2) +#endif + #endif /* __ASM_NDS32_MACH_TYPE_H */ diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 2e4a06c35a..2cd5db7c59 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -37,6 +37,7 @@ #include <asm/mmu.h> #include <asm/fsl_law.h> #include <asm/fsl_serdes.h> +#include <asm/fsl_srio.h> #include <linux/compiler.h> #include "mp.h" #ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND @@ -48,8 +49,6 @@ DECLARE_GLOBAL_DATA_PTR; -extern void srio_init(void); - #ifdef CONFIG_QE extern qe_iop_conf_t qe_iop_conf_tab[]; extern void qe_config_iopin(u8 port, u8 pin, int dir, @@ -443,6 +442,12 @@ skip_l2: #ifdef CONFIG_SYS_SRIO srio_init(); +#ifdef CONFIG_SRIOBOOT_MASTER + srio_boot_master(); +#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF + srio_boot_master_release_slave(); +#endif +#endif #endif #if defined(CONFIG_MP) diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 4d37d6e863..8e99ef6c68 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -1,5 +1,5 @@ /* - * Copyright 2004, 2007-2011 Freescale Semiconductor, Inc. + * Copyright 2004, 2007-2012 Freescale Semiconductor, Inc. * Copyright (C) 2003 Motorola,Inc. * * See file CREDITS for list of people who contributed to this @@ -179,41 +179,50 @@ l2_disabled: andi. r1,r3,L1CSR0_DCE@l beq 2b +/* + * Ne need to setup interrupt vector for NAND SPL + * because NAND SPL never compiles it. + */ +#if !defined(CONFIG_NAND_SPL) /* Setup interrupt vectors */ lis r1,CONFIG_SYS_MONITOR_BASE@h mtspr IVPR,r1 - li r1,0x0100 - mtspr IVOR0,r1 /* 0: Critical input */ - li r1,0x0200 - mtspr IVOR1,r1 /* 1: Machine check */ - li r1,0x0300 - mtspr IVOR2,r1 /* 2: Data storage */ - li r1,0x0400 - mtspr IVOR3,r1 /* 3: Instruction storage */ - li r1,0x0500 - mtspr IVOR4,r1 /* 4: External interrupt */ - li r1,0x0600 - mtspr IVOR5,r1 /* 5: Alignment */ - li r1,0x0700 - mtspr IVOR6,r1 /* 6: Program check */ - li r1,0x0800 - mtspr IVOR7,r1 /* 7: floating point unavailable */ - li r1,0x0900 - mtspr IVOR8,r1 /* 8: System call */ + lis r3,(CONFIG_SYS_MONITOR_BASE & 0xffff)@h + ori r3,r3,(CONFIG_SYS_MONITOR_BASE & 0xffff)@l + + addi r4,r3,CriticalInput - _start + _START_OFFSET + mtspr IVOR0,r4 /* 0: Critical input */ + addi r4,r3,MachineCheck - _start + _START_OFFSET + mtspr IVOR1,r4 /* 1: Machine check */ + addi r4,r3,DataStorage - _start + _START_OFFSET + mtspr IVOR2,r4 /* 2: Data storage */ + addi r4,r3,InstStorage - _start + _START_OFFSET + mtspr IVOR3,r4 /* 3: Instruction storage */ + addi r4,r3,ExtInterrupt - _start + _START_OFFSET + mtspr IVOR4,r4 /* 4: External interrupt */ + addi r4,r3,Alignment - _start + _START_OFFSET + mtspr IVOR5,r4 /* 5: Alignment */ + addi r4,r3,ProgramCheck - _start + _START_OFFSET + mtspr IVOR6,r4 /* 6: Program check */ + addi r4,r3,FPUnavailable - _start + _START_OFFSET + mtspr IVOR7,r4 /* 7: floating point unavailable */ + addi r4,r3,SystemCall - _start + _START_OFFSET + mtspr IVOR8,r4 /* 8: System call */ /* 9: Auxiliary processor unavailable(unsupported) */ - li r1,0x0a00 - mtspr IVOR10,r1 /* 10: Decrementer */ - li r1,0x0b00 - mtspr IVOR11,r1 /* 11: Interval timer */ - li r1,0x0c00 - mtspr IVOR12,r1 /* 12: Watchdog timer */ - li r1,0x0d00 - mtspr IVOR13,r1 /* 13: Data TLB error */ - li r1,0x0e00 - mtspr IVOR14,r1 /* 14: Instruction TLB error */ - li r1,0x0f00 - mtspr IVOR15,r1 /* 15: Debug */ + addi r4,r3,Decrementer - _start + _START_OFFSET + mtspr IVOR10,r4 /* 10: Decrementer */ + addi r4,r3,IntervalTimer - _start + _START_OFFSET + mtspr IVOR11,r4 /* 11: Interval timer */ + addi r4,r3,WatchdogTimer - _start + _START_OFFSET + mtspr IVOR12,r4 /* 12: Watchdog timer */ + addi r4,r3,DataTLBError - _start + _START_OFFSET + mtspr IVOR13,r4 /* 13: Data TLB error */ + addi r4,r3,InstructionTLBError - _start + _START_OFFSET + mtspr IVOR14,r4 /* 14: Instruction TLB error */ + addi r4,r3,DebugBreakpoint - _start + _START_OFFSET + mtspr IVOR15,r4 /* 15: Debug */ +#endif /* Clear and set up some registers. */ li r0,0x0000 @@ -434,13 +443,15 @@ create_ccsr_new_tlb: ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l +#ifdef CONFIG_ENABLE_36BIT_PHYS lis r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h ori r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l + mtspr MAS7, r7 +#endif mtspr MAS0, r0 mtspr MAS1, r1 mtspr MAS2, r2 mtspr MAS3, r3 - mtspr MAS7, r7 isync msync tlbwe @@ -456,12 +467,14 @@ create_ccsr_old_tlb: ori r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l lis r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h ori r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l +#ifdef CONFIG_ENABLE_36BIT_PHYS li r7, 0 /* The default CCSR address is always a 32-bit number */ + mtspr MAS7, r7 +#endif mtspr MAS0, r0 /* MAS1 is the same as above */ mtspr MAS2, r2 mtspr MAS3, r3 - mtspr MAS7, r7 isync msync tlbwe @@ -1490,6 +1503,39 @@ trap_init: cmplw 0,r7,r8 blt 2b + /* Update IVORs as per relocated vector table address */ + li r7,0x0100 + mtspr IVOR0,r7 /* 0: Critical input */ + li r7,0x0200 + mtspr IVOR1,r7 /* 1: Machine check */ + li r7,0x0300 + mtspr IVOR2,r7 /* 2: Data storage */ + li r7,0x0400 + mtspr IVOR3,r7 /* 3: Instruction storage */ + li r7,0x0500 + mtspr IVOR4,r7 /* 4: External interrupt */ + li r7,0x0600 + mtspr IVOR5,r7 /* 5: Alignment */ + li r7,0x0700 + mtspr IVOR6,r7 /* 6: Program check */ + li r7,0x0800 + mtspr IVOR7,r7 /* 7: floating point unavailable */ + li r7,0x0900 + mtspr IVOR8,r7 /* 8: System call */ + /* 9: Auxiliary processor unavailable(unsupported) */ + li r7,0x0a00 + mtspr IVOR10,r7 /* 10: Decrementer */ + li r7,0x0b00 + mtspr IVOR11,r7 /* 11: Interval timer */ + li r7,0x0c00 + mtspr IVOR12,r7 /* 12: Watchdog timer */ + li r7,0x0d00 + mtspr IVOR13,r7 /* 13: Data TLB error */ + li r7,0x0e00 + mtspr IVOR14,r7 /* 14: Instruction TLB error */ + li r7,0x0f00 + mtspr IVOR15,r7 /* 15: Debug */ + lis r7,0x0 mtspr IVPR,r7 diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds index 04bc73170a..b1a1dac16f 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. + * Copyright 2009-2012 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -87,7 +87,7 @@ SECTIONS .bootpg ADDR(.text) - 0x1000 : { - arch/powerpc/cpu/mpc85xx/start.o KEEP(*(.bootpg)) + KEEP(arch/powerpc/cpu/mpc85xx/start.o (.bootpg)) } :text = 0xffff . = ADDR(.text) + 0x80000; diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c index e46d328067..c7f394972b 100644 --- a/arch/powerpc/cpu/mpc8xxx/srio.c +++ b/arch/powerpc/cpu/mpc8xxx/srio.c @@ -21,6 +21,16 @@ #include <config.h> #include <asm/fsl_law.h> #include <asm/fsl_serdes.h> +#include <asm/fsl_srio.h> + +#define SRIO_PORT_ACCEPT_ALL 0x10000001 +#define SRIO_IB_ATMU_AR 0x80f55000 +#define SRIO_OB_ATMU_AR_MAINT 0x80077000 +#define SRIO_OB_ATMU_AR_RW 0x80045000 +#define SRIO_LCSBA1CSR_OFFSET 0x5c +#define SRIO_MAINT_WIN_SIZE 0x1000000 /* 16M */ +#define SRIO_RW_WIN_SIZE 0x100000 /* 1M */ +#define SRIO_LCSBA1CSR 0x60000000 #if defined(CONFIG_FSL_CORENET) #define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1 @@ -84,3 +94,203 @@ void srio_init(void) setbits_be32(&gur->devdisr, _DEVDISR_RMU); } } + +#ifdef CONFIG_SRIOBOOT_MASTER +void srio_boot_master(void) +{ + struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR; + + /* set port accept-all */ + out_be32((void *)&srio->impl.port[CONFIG_SRIOBOOT_MASTER_PORT].ptaacr, + SRIO_PORT_ACCEPT_ALL); + + debug("SRIOBOOT - MASTER: Master port [ %d ] for srio boot.\n", + CONFIG_SRIOBOOT_MASTER_PORT); + /* configure inbound window for slave's u-boot image */ + debug("SRIOBOOT - MASTER: Inbound window for slave's image; " + "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n", + (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1, + (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1, + CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwtar, + CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1 >> 12); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwbar, + CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1 >> 12); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[0].riwar, + SRIO_IB_ATMU_AR + | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE)); + + /* configure inbound window for slave's u-boot image */ + debug("SRIOBOOT - MASTER: Inbound window for slave's image; " + "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n", + (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2, + (u64)CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2, + CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwtar, + CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2 >> 12); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwbar, + CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2 >> 12); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[1].riwar, + SRIO_IB_ATMU_AR + | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE)); + + /* configure inbound window for slave's ucode */ + debug("SRIOBOOT - MASTER: Inbound window for slave's ucode; " + "Local = 0x%llx, Srio = 0x%llx, Size = 0x%x\n", + (u64)CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS, + (u64)CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS, + CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwtar, + CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS >> 12); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwbar, + CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS >> 12); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[2].riwar, + SRIO_IB_ATMU_AR + | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE)); + + /* configure inbound window for slave's ENV */ + debug("SRIOBOOT - MASTER: Inbound window for slave's ENV; " + "Local = 0x%llx, Siro = 0x%llx, Size = 0x%x\n", + CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS, + CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS, + CONFIG_SRIOBOOT_SLAVE_ENV_SIZE); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwtar, + CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS >> 12); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwbar, + CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS >> 12); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT].inbw[3].riwar, + SRIO_IB_ATMU_AR + | atmu_size_mask(CONFIG_SRIOBOOT_SLAVE_ENV_SIZE)); +} + +#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF +void srio_boot_master_release_slave(void) +{ + struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR; + u32 escsr; + debug("SRIOBOOT - MASTER: " + "Check the port status and release slave core ...\n"); + + escsr = in_be32((void *)&srio->lp_serial + .port[CONFIG_SRIOBOOT_MASTER_PORT].pescsr); + if (escsr & 0x2) { + if (escsr & 0x10100) { + debug("SRIOBOOT - MASTER: Port [ %d ] is error.\n", + CONFIG_SRIOBOOT_MASTER_PORT); + } else { + debug("SRIOBOOT - MASTER: " + "Port [ %d ] is ready, now release slave's core ...\n", + CONFIG_SRIOBOOT_MASTER_PORT); + /* + * configure outbound window + * with maintenance attribute to set slave's LCSBA1CSR + */ + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT] + .outbw[1].rowtar, 0); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT] + .outbw[1].rowtear, 0); + if (CONFIG_SRIOBOOT_MASTER_PORT) + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT] + .outbw[1].rowbar, + CONFIG_SYS_SRIO2_MEM_PHYS >> 12); + else + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT] + .outbw[1].rowbar, + CONFIG_SYS_SRIO1_MEM_PHYS >> 12); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT] + .outbw[1].rowar, + SRIO_OB_ATMU_AR_MAINT + | atmu_size_mask(SRIO_MAINT_WIN_SIZE)); + + /* + * configure outbound window + * with R/W attribute to set slave's BRR + */ + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT] + .outbw[2].rowtar, + SRIO_LCSBA1CSR >> 9); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT] + .outbw[2].rowtear, 0); + if (CONFIG_SRIOBOOT_MASTER_PORT) + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT] + .outbw[2].rowbar, + (CONFIG_SYS_SRIO2_MEM_PHYS + + SRIO_MAINT_WIN_SIZE) >> 12); + else + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT] + .outbw[2].rowbar, + (CONFIG_SYS_SRIO1_MEM_PHYS + + SRIO_MAINT_WIN_SIZE) >> 12); + out_be32((void *)&srio->atmu + .port[CONFIG_SRIOBOOT_MASTER_PORT] + .outbw[2].rowar, + SRIO_OB_ATMU_AR_RW + | atmu_size_mask(SRIO_RW_WIN_SIZE)); + + /* + * Set the LCSBA1CSR register in slave + * by the maint-outbound window + */ + if (CONFIG_SRIOBOOT_MASTER_PORT) { + out_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT + + SRIO_LCSBA1CSR_OFFSET, + SRIO_LCSBA1CSR); + while (in_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT + + SRIO_LCSBA1CSR_OFFSET) + != SRIO_LCSBA1CSR) + ; + /* + * And then set the BRR register + * to release slave core + */ + out_be32((void *)CONFIG_SYS_SRIO2_MEM_VIRT + + SRIO_MAINT_WIN_SIZE + + CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET, + CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK); + } else { + out_be32((void *)CONFIG_SYS_SRIO1_MEM_VIRT + + SRIO_LCSBA1CSR_OFFSET, + SRIO_LCSBA1CSR); + while (in_be32((void *)CONFIG_SYS_SRIO1_MEM_VIRT + + SRIO_LCSBA1CSR_OFFSET) + != SRIO_LCSBA1CSR) + ; + /* + * And then set the BRR register + * to release slave core + */ + out_be32((void *)CONFIG_SYS_SRIO1_MEM_VIRT + + SRIO_MAINT_WIN_SIZE + + CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET, + CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK); + } + debug("SRIOBOOT - MASTER: " + "Release slave successfully! Now the slave should start up!\n"); + } + } else + debug("SRIOBOOT - MASTER: Port [ %d ] is not ready.\n", + CONFIG_SRIOBOOT_MASTER_PORT); +} +#endif +#endif diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 8654625fac..191629b628 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -65,6 +65,11 @@ #define CONFIG_SYS_FSL_ERRATUM_NMG_DDR120 #define CONFIG_SYS_FSL_ERRATUM_NMG_LBC103 #define CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129 +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_RMU +#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 #elif defined(CONFIG_MPC8555) #define CONFIG_MAX_CPUS 1 @@ -85,6 +90,11 @@ #define MAX_QE_RISC 2 #define QE_NUM_OF_SNUM 28 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_RMU +#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 #elif defined(CONFIG_MPC8569) #define CONFIG_MAX_CPUS 1 @@ -94,6 +104,11 @@ #define MAX_QE_RISC 4 #define QE_NUM_OF_SNUM 46 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_RMU +#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 #elif defined(CONFIG_MPC8572) #define CONFIG_MAX_CPUS 2 @@ -298,6 +313,11 @@ #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001 +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_RMU +#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 #elif defined(CONFIG_PPC_P2040) #define CONFIG_MAX_CPUS 4 @@ -317,6 +337,9 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #elif defined(CONFIG_PPC_P2041) #define CONFIG_MAX_CPUS 4 @@ -338,6 +361,9 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #elif defined(CONFIG_PPC_P3041) #define CONFIG_MAX_CPUS 4 @@ -359,6 +385,9 @@ #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #elif defined(CONFIG_PPC_P3060) #define CONFIG_MAX_CPUS 8 @@ -375,6 +404,9 @@ #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #elif defined(CONFIG_PPC_P4040) #define CONFIG_MAX_CPUS 4 @@ -387,6 +419,9 @@ #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #elif defined(CONFIG_PPC_P4080) #define CONFIG_MAX_CPUS 8 @@ -417,6 +452,11 @@ #define CONFIG_SYS_P4080_ERRATUM_SERDES_A005 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_RMU +#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 /* P5010 is single core version of P5020 */ #elif defined(CONFIG_PPC_P5010) @@ -438,6 +478,9 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #elif defined(CONFIG_PPC_P5020) #define CONFIG_MAX_CPUS 2 @@ -458,6 +501,9 @@ #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474 +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #else #error Processor type not defined for this platform diff --git a/arch/powerpc/include/asm/fsl_srio.h b/arch/powerpc/include/asm/fsl_srio.h new file mode 100644 index 0000000000..a905a266c4 --- /dev/null +++ b/arch/powerpc/include/asm/fsl_srio.h @@ -0,0 +1,64 @@ +/* + * Copyright 2011-2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _FSL_SRIO_H_ +#define _FSL_SRIO_H_ + +enum atmu_size { + ATMU_SIZE_4K = 0xb, + ATMU_SIZE_8K, + ATMU_SIZE_16K, + ATMU_SIZE_32K, + ATMU_SIZE_64K, + ATMU_SIZE_128K, + ATMU_SIZE_256K, + ATMU_SIZE_512K, + ATMU_SIZE_1M, + ATMU_SIZE_2M, + ATMU_SIZE_4M, + ATMU_SIZE_8M, + ATMU_SIZE_16M, + ATMU_SIZE_32M, + ATMU_SIZE_64M, + ATMU_SIZE_128M, + ATMU_SIZE_256M, + ATMU_SIZE_512M, + ATMU_SIZE_1G, + ATMU_SIZE_2G, + ATMU_SIZE_4G, + ATMU_SIZE_8G, + ATMU_SIZE_16G, + ATMU_SIZE_32G, + ATMU_SIZE_64G, +}; + +#define atmu_size_mask(sz) (__ilog2_u64(sz) - 1) +#define atmu_size_bytes(x) (1ULL << ((x & 0x3f) + 1)) + +extern void srio_init(void); +#ifdef CONFIG_SRIOBOOT_MASTER +extern void srio_boot_master(void); +#ifdef CONFIG_SRIOBOOT_SLAVE_HOLDOFF +extern void srio_boot_master_release_slave(void); +#endif +#endif +#endif diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 9b08cb8c1a..632e3c1669 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1353,171 +1353,235 @@ typedef struct ccsr_cpm { } ccsr_cpm_t; #endif -/* RapidIO Registers */ -typedef struct ccsr_rio { - u32 didcar; /* Device Identity Capability */ - u32 dicar; /* Device Information Capability */ - u32 aidcar; /* Assembly Identity Capability */ - u32 aicar; /* Assembly Information Capability */ - u32 pefcar; /* Processing Element Features Capability */ - u32 spicar; /* Switch Port Information Capability */ - u32 socar; /* Source Operations Capability */ - u32 docar; /* Destination Operations Capability */ +#ifdef CONFIG_SYS_SRIO +/* Architectural regsiters */ +struct rio_arch { + u32 didcar; /* Device Identity CAR */ + u32 dicar; /* Device Information CAR */ + u32 aidcar; /* Assembly Identity CAR */ + u32 aicar; /* Assembly Information CAR */ + u32 pefcar; /* Processing Element Features CAR */ + u8 res0[4]; + u32 socar; /* Source Operations CAR */ + u32 docar; /* Destination Operations CAR */ u8 res1[32]; - u32 msr; /* Mailbox Cmd And Status */ - u32 pwdcsr; /* Port-Write & Doorbell Cmd And Status */ + u32 mcsr; /* Mailbox CSR */ + u32 pwdcsr; /* Port-Write and Doorbell CSR */ u8 res2[4]; u32 pellccsr; /* Processing Element Logic Layer CCSR */ u8 res3[12]; - u32 lcsbacsr; /* Local Cfg Space Base Addr Cmd & Status */ - u32 bdidcsr; /* Base Device ID Cmd & Status */ + u32 lcsbacsr; /* Local Configuration Space BACSR */ + u32 bdidcsr; /* Base Device ID CSR */ u8 res4[4]; - u32 hbdidlcsr; /* Host Base Device ID Lock Cmd & Status */ - u32 ctcsr; /* Component Tag Cmd & Status */ - u8 res5[144]; - u32 pmbh0csr; /* Port Maint. Block Hdr 0 Cmd & Status */ - u8 res6[28]; - u32 pltoccsr; /* Port Link Time-out Ctrl Cmd & Status */ - u32 prtoccsr; /* Port Response Time-out Ctrl Cmd & Status */ - u8 res7[20]; - u32 pgccsr; /* Port General Cmd & Status */ - u32 plmreqcsr; /* Port Link Maint. Request Cmd & Status */ - u32 plmrespcsr; /* Port Link Maint. Response Cmd & Status */ - u32 plascsr; /* Port Local Ackid Status Cmd & Status */ - u8 res8[12]; - u32 pescsr; /* Port Error & Status Cmd & Status */ - u32 pccsr; /* Port Control Cmd & Status */ - u8 res9[65184]; - u32 cr; /* Port Control Cmd & Status */ - u8 res10[12]; - u32 pcr; /* Port Configuration */ - u32 peir; /* Port Error Injection */ - u8 res11[3048]; - u32 rowtar0; /* RIO Outbound Window Translation Addr 0 */ - u8 res12[12]; - u32 rowar0; /* RIO Outbound Attrs 0 */ - u8 res13[12]; - u32 rowtar1; /* RIO Outbound Window Translation Addr 1 */ - u8 res14[4]; - u32 rowbar1; /* RIO Outbound Window Base Addr 1 */ - u8 res15[4]; - u32 rowar1; /* RIO Outbound Attrs 1 */ - u8 res16[12]; - u32 rowtar2; /* RIO Outbound Window Translation Addr 2 */ - u8 res17[4]; - u32 rowbar2; /* RIO Outbound Window Base Addr 2 */ - u8 res18[4]; - u32 rowar2; /* RIO Outbound Attrs 2 */ - u8 res19[12]; - u32 rowtar3; /* RIO Outbound Window Translation Addr 3 */ - u8 res20[4]; - u32 rowbar3; /* RIO Outbound Window Base Addr 3 */ - u8 res21[4]; - u32 rowar3; /* RIO Outbound Attrs 3 */ - u8 res22[12]; - u32 rowtar4; /* RIO Outbound Window Translation Addr 4 */ - u8 res23[4]; - u32 rowbar4; /* RIO Outbound Window Base Addr 4 */ - u8 res24[4]; - u32 rowar4; /* RIO Outbound Attrs 4 */ - u8 res25[12]; - u32 rowtar5; /* RIO Outbound Window Translation Addr 5 */ - u8 res26[4]; - u32 rowbar5; /* RIO Outbound Window Base Addr 5 */ - u8 res27[4]; - u32 rowar5; /* RIO Outbound Attrs 5 */ - u8 res28[12]; - u32 rowtar6; /* RIO Outbound Window Translation Addr 6 */ - u8 res29[4]; - u32 rowbar6; /* RIO Outbound Window Base Addr 6 */ - u8 res30[4]; - u32 rowar6; /* RIO Outbound Attrs 6 */ - u8 res31[12]; - u32 rowtar7; /* RIO Outbound Window Translation Addr 7 */ - u8 res32[4]; - u32 rowbar7; /* RIO Outbound Window Base Addr 7 */ - u8 res33[4]; - u32 rowar7; /* RIO Outbound Attrs 7 */ - u8 res34[12]; - u32 rowtar8; /* RIO Outbound Window Translation Addr 8 */ - u8 res35[4]; - u32 rowbar8; /* RIO Outbound Window Base Addr 8 */ - u8 res36[4]; - u32 rowar8; /* RIO Outbound Attrs 8 */ - u8 res37[76]; - u32 riwtar4; /* RIO Inbound Window Translation Addr 4 */ - u8 res38[4]; - u32 riwbar4; /* RIO Inbound Window Base Addr 4 */ - u8 res39[4]; - u32 riwar4; /* RIO Inbound Attrs 4 */ - u8 res40[12]; - u32 riwtar3; /* RIO Inbound Window Translation Addr 3 */ - u8 res41[4]; - u32 riwbar3; /* RIO Inbound Window Base Addr 3 */ - u8 res42[4]; - u32 riwar3; /* RIO Inbound Attrs 3 */ - u8 res43[12]; - u32 riwtar2; /* RIO Inbound Window Translation Addr 2 */ - u8 res44[4]; - u32 riwbar2; /* RIO Inbound Window Base Addr 2 */ - u8 res45[4]; - u32 riwar2; /* RIO Inbound Attrs 2 */ - u8 res46[12]; - u32 riwtar1; /* RIO Inbound Window Translation Addr 1 */ - u8 res47[4]; - u32 riwbar1; /* RIO Inbound Window Base Addr 1 */ - u8 res48[4]; - u32 riwar1; /* RIO Inbound Attrs 1 */ - u8 res49[12]; - u32 riwtar0; /* RIO Inbound Window Translation Addr 0 */ - u8 res50[12]; - u32 riwar0; /* RIO Inbound Attrs 0 */ - u8 res51[12]; - u32 pnfedr; /* Port Notification/Fatal Error Detect */ - u32 pnfedir; /* Port Notification/Fatal Error Detect */ - u32 pnfeier; /* Port Notification/Fatal Error IRQ Enable */ - u32 pecr; /* Port Error Control */ - u32 pepcsr0; /* Port Error Packet/Control Symbol 0 */ - u32 pepr1; /* Port Error Packet 1 */ - u32 pepr2; /* Port Error Packet 2 */ - u8 res52[4]; - u32 predr; /* Port Recoverable Error Detect */ - u8 res53[4]; - u32 pertr; /* Port Error Recovery Threshold */ - u32 prtr; /* Port Retry Threshold */ - u8 res54[464]; - u32 omr; /* Outbound Mode */ - u32 osr; /* Outbound Status */ - u32 eodqtpar; /* Extended Outbound Desc Queue Tail Ptr Addr */ - u32 odqtpar; /* Outbound Desc Queue Tail Ptr Addr */ - u32 eosar; /* Extended Outbound Unit Source Addr */ - u32 osar; /* Outbound Unit Source Addr */ - u32 odpr; /* Outbound Destination Port */ - u32 odatr; /* Outbound Destination Attrs */ - u32 odcr; /* Outbound Doubleword Count */ - u32 eodqhpar; /* Extended Outbound Desc Queue Head Ptr Addr */ - u32 odqhpar; /* Outbound Desc Queue Head Ptr Addr */ - u8 res55[52]; - u32 imr; /* Outbound Mode */ - u32 isr; /* Inbound Status */ - u32 eidqtpar; /* Extended Inbound Desc Queue Tail Ptr Addr */ - u32 idqtpar; /* Inbound Desc Queue Tail Ptr Addr */ - u32 eifqhpar; /* Extended Inbound Frame Queue Head Ptr Addr */ - u32 ifqhpar; /* Inbound Frame Queue Head Ptr Addr */ - u8 res56[1000]; - u32 dmr; /* Doorbell Mode */ - u32 dsr; /* Doorbell Status */ - u32 edqtpar; /* Extended Doorbell Queue Tail Ptr Addr */ - u32 dqtpar; /* Doorbell Queue Tail Ptr Addr */ - u32 edqhpar; /* Extended Doorbell Queue Head Ptr Addr */ - u32 dqhpar; /* Doorbell Queue Head Ptr Addr */ - u8 res57[104]; - u32 pwmr; /* Port-Write Mode */ - u32 pwsr; /* Port-Write Status */ - u32 epwqbar; /* Extended Port-Write Queue Base Addr */ - u32 pwqbar; /* Port-Write Queue Base Addr */ - u8 res58[60176]; -} ccsr_rio_t; + u32 hbdidlcsr; /* Host Base Device ID Lock CSR */ + u32 ctcsr; /* Component Tag CSR */ +}; + +/* Extended Features Space: 1x/4x LP-Serial Port registers */ +struct rio_lp_serial_port { + u32 plmreqcsr; /* Port Link Maintenance Request CSR */ + u32 plmrespcsr; /* Port Link Maintenance Response CS */ + u32 plascsr; /* Port Local Ackid Status CSR */ + u8 res0[12]; + u32 pescsr; /* Port Error and Status CSR */ + u32 pccsr; /* Port Control CSR */ +}; + +/* Extended Features Space: 1x/4x LP-Serial registers */ +struct rio_lp_serial { + u32 pmbh0csr; /* Port Maintenance Block Header 0 CSR */ + u8 res0[28]; + u32 pltoccsr; /* Port Link Time-out CCSR */ + u32 prtoccsr; /* Port Response Time-out CCSR */ + u8 res1[20]; + u32 pgccsr; /* Port General CSR */ + struct rio_lp_serial_port port[CONFIG_SYS_FSL_SRIO_MAX_PORTS]; +}; + +/* Logical error reporting registers */ +struct rio_logical_err { + u32 erbh; /* Error Reporting Block Header Register */ + u8 res0[4]; + u32 ltledcsr; /* Logical/Transport layer error DCSR */ + u32 ltleecsr; /* Logical/Transport layer error ECSR */ + u8 res1[4]; + u32 ltlaccsr; /* Logical/Transport layer ACCSR */ + u32 ltldidccsr; /* Logical/Transport layer DID CCSR */ + u32 ltlcccsr; /* Logical/Transport layer control CCSR */ +}; + +/* Physical error reporting port registers */ +struct rio_phys_err_port { + u32 edcsr; /* Port error detect CSR */ + u32 erecsr; /* Port error rate enable CSR */ + u32 ecacsr; /* Port error capture attributes CSR */ + u32 pcseccsr0; /* Port packet/control symbol ECCSR 0 */ + u32 peccsr[3]; /* Port error capture CSR */ + u8 res0[12]; + u32 ercsr; /* Port error rate CSR */ + u32 ertcsr; /* Port error rate threshold CSR */ + u8 res1[16]; +}; + +/* Physical error reporting registers */ +struct rio_phys_err { + struct rio_phys_err_port port[CONFIG_SYS_FSL_SRIO_MAX_PORTS]; +}; + +/* Implementation Space: General Port-Common */ +struct rio_impl_common { + u8 res0[4]; + u32 llcr; /* Logical Layer Configuration Register */ + u8 res1[8]; + u32 epwisr; /* Error / Port-Write Interrupt SR */ + u8 res2[12]; + u32 lretcr; /* Logical Retry Error Threshold CR */ + u8 res3[92]; + u32 pretcr; /* Physical Retry Erorr Threshold CR */ + u8 res4[124]; +}; + +/* Implementation Space: Port Specific */ +struct rio_impl_port_spec { + u32 adidcsr; /* Port Alt. Device ID CSR */ + u8 res0[28]; + u32 ptaacr; /* Port Pass-Through/Accept-All CR */ + u32 lopttlcr; + u8 res1[8]; + u32 iecsr; /* Port Implementation Error CSR */ + u8 res2[12]; + u32 pcr; /* Port Phsyical Configuration Register */ + u8 res3[20]; + u32 slcsr; /* Port Serial Link CSR */ + u8 res4[4]; + u32 sleicr; /* Port Serial Link Error Injection */ + u32 a0txcr; /* Port Arbitration 0 Tx CR */ + u32 a1txcr; /* Port Arbitration 1 Tx CR */ + u32 a2txcr; /* Port Arbitration 2 Tx CR */ + u32 mreqtxbacr[3]; /* Port Request Tx Buffer ACR */ + u32 mrspfctxbacr; /* Port Response/Flow Control Tx Buffer ACR */ +}; + +/* Implementation Space: register */ +struct rio_implement { + struct rio_impl_common com; + struct rio_impl_port_spec port[CONFIG_SYS_FSL_SRIO_MAX_PORTS]; +}; + +/* Revision Control Register */ +struct rio_rev_ctrl { + u32 ipbrr[2]; /* IP Block Revision Register */ +}; + +struct rio_atmu_row { + u32 rowtar; /* RapidIO Outbound Window TAR */ + u32 rowtear; /* RapidIO Outbound Window TEAR */ + u32 rowbar; + u8 res0[4]; + u32 rowar; /* RapidIO Outbound Attributes Register */ + u32 rowsr[3]; /* Port RapidIO outbound window segment register */ +}; + +struct rio_atmu_riw { + u32 riwtar; /* RapidIO Inbound Window Translation AR */ + u8 res0[4]; + u32 riwbar; /* RapidIO Inbound Window Base AR */ + u8 res1[4]; + u32 riwar; /* RapidIO Inbound Attributes Register */ + u8 res2[12]; +}; + +/* ATMU window registers */ +struct rio_atmu_win { + struct rio_atmu_row outbw[CONFIG_SYS_FSL_SRIO_OB_WIN_NUM]; + u8 res0[64]; + struct rio_atmu_riw inbw[CONFIG_SYS_FSL_SRIO_IB_WIN_NUM]; +}; + +struct rio_atmu { + struct rio_atmu_win port[CONFIG_SYS_FSL_SRIO_MAX_PORTS]; +}; + +#ifdef CONFIG_SYS_FSL_RMU +struct rio_msg { + u32 omr; /* Outbound Mode Register */ + u32 osr; /* Outbound Status Register */ + u32 eodqdpar; /* Extended Outbound DQ DPAR */ + u32 odqdpar; /* Outbound Descriptor Queue DPAR */ + u32 eosar; /* Extended Outbound Unit Source AR */ + u32 osar; /* Outbound Unit Source AR */ + u32 odpr; /* Outbound Destination Port Register */ + u32 odatr; /* Outbound Destination Attributes Register */ + u32 odcr; /* Outbound Doubleword Count Register */ + u32 eodqepar; /* Extended Outbound DQ EPAR */ + u32 odqepar; /* Outbound Descriptor Queue EPAR */ + u32 oretr; /* Outbound Retry Error Threshold Register */ + u32 omgr; /* Outbound Multicast Group Register */ + u32 omlr; /* Outbound Multicast List Register */ + u8 res0[40]; + u32 imr; /* Outbound Mode Register */ + u32 isr; /* Inbound Status Register */ + u32 eidqdpar; /* Extended Inbound Descriptor Queue DPAR */ + u32 idqdpar; /* Inbound Descriptor Queue DPAR */ + u32 eifqepar; /* Extended Inbound Frame Queue EPAR */ + u32 ifqepar; /* Inbound Frame Queue EPAR */ + u32 imirir; /* Inbound Maximum Interrutp RIR */ + u8 res1[4]; + u32 eihqepar; /* Extended inbound message header queue EPAR */ + u32 ihqepar; /* Inbound message header queue EPAR */ + u8 res2[120]; +}; + +struct rio_dbell { + u32 odmr; /* Outbound Doorbell Mode Register */ + u32 odsr; /* Outbound Doorbell Status Register */ + u8 res0[16]; + u32 oddpr; /* Outbound Doorbell Destination Port */ + u32 oddatr; /* Outbound Doorbell Destination AR */ + u8 res1[12]; + u32 oddretr; /* Outbound Doorbell Retry Threshold CR */ + u8 res2[48]; + u32 idmr; /* Inbound Doorbell Mode Register */ + u32 idsr; /* Inbound Doorbell Status Register */ + u32 iedqdpar; /* Extended Inbound Doorbell Queue DPAR */ + u32 iqdpar; /* Inbound Doorbell Queue DPAR */ + u32 iedqepar; /* Extended Inbound Doorbell Queue EPAR */ + u32 idqepar; /* Inbound Doorbell Queue EPAR */ + u32 idmirir; /* Inbound Doorbell Max Interrupt RIR */ +}; + +struct rio_pw { + u32 pwmr; /* Port-Write Mode Register */ + u32 pwsr; /* Port-Write Status Register */ + u32 epwqbar; /* Extended Port-Write Queue BAR */ + u32 pwqbar; /* Port-Write Queue Base Address Register */ +}; +#endif + +/* RapidIO Registers */ +struct ccsr_rio { + struct rio_arch arch; + u8 res0[144]; + struct rio_lp_serial lp_serial; + u8 res1[1152]; + struct rio_logical_err logical_err; + u8 res2[32]; + struct rio_phys_err phys_err; + u8 res3[63808]; + struct rio_implement impl; + u8 res4[2552]; + struct rio_rev_ctrl rev; + struct rio_atmu atmu; +#ifdef CONFIG_SYS_FSL_RMU + u8 res5[8192]; + struct rio_msg msg[CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM]; + u8 res6[512]; + struct rio_dbell dbell; + u8 res7[100]; + struct rio_pw pw; +#endif +}; +#endif /* Quick Engine Block Pin Muxing Registers */ typedef struct par_io { @@ -2443,6 +2507,7 @@ struct ccsr_rman { #define CONFIG_SYS_MPC85xx_PIC_OFFSET 0x40000 #define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000 +#define CONFIG_SYS_FSL_SRIO_OFFSET 0xC0000 #define CONFIG_SYS_FSL_CPC_ADDR \ (CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET) @@ -2516,6 +2581,8 @@ struct ccsr_rman { (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET) #define CONFIG_SYS_FSL_FM2_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_FM2_OFFSET) +#define CONFIG_SYS_FSL_SRIO_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_FSL_SRIO_OFFSET) #define CONFIG_SYS_PCI1_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCI1_OFFSET) diff --git a/board/gdsys/neo/Makefile b/board/AndesTech/adp-ag102/Makefile index dc5b5b887a..1cbf2d46dd 100644 --- a/board/gdsys/neo/Makefile +++ b/board/AndesTech/adp-ag102/Makefile @@ -1,6 +1,6 @@ # -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. +# Copyright (C) 2011 Andes Technology Corporation +# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> # # See file CREDITS for list of people who contributed to this # project. @@ -25,15 +25,13 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS = $(BOARD).o -SOBJS = +COBJS := adp-ag102.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) -$(LIB): $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) ######################################################################### diff --git a/board/AndesTech/adp-ag102/adp-ag102.c b/board/AndesTech/adp-ag102/adp-ag102.c new file mode 100644 index 0000000000..5a25632250 --- /dev/null +++ b/board/AndesTech/adp-ag102/adp-ag102.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2011 Andes Technology Corporation + * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <netdev.h> +#include <asm/io.h> + +#include <faraday/ftsdc010.h> +#ifdef CONFIG_FTSMC020 +#include <faraday/ftsmc020.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Miscellaneous platform dependent initializations + */ + +int board_init(void) +{ + /* + * refer to BOOT_PARAMETER_PA_BASE within + * "linux/arch/nds32/include/asm/misc_spec.h" + */ + gd->bd->bi_arch_number = MACH_TYPE_ADPAG102; + gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400; + +#if !defined(CONFIG_SYS_NO_FLASH) + ftsmc020_init(); /* initialize Flash */ +#endif /* CONFIG_SYS_NO_FLASH */ + return 0; +} + +int dram_init(void) +{ + unsigned long sdram_base = PHYS_SDRAM_0; + unsigned long expected_size = PHYS_SDRAM_0_SIZE; + unsigned long actual_size; + + actual_size = get_ram_size((void *)sdram_base, expected_size); + + gd->ram_size = actual_size; + + if (expected_size != actual_size) { + printf("Warning: Only %lu of %lu MiB SDRAM is working\n", + actual_size >> 20, expected_size >> 20); + } + + return 0; +} + +int board_eth_init(bd_t *bd) +{ + return ftgmac100_initialize(bd); +} + +#if !defined(CONFIG_SYS_NO_FLASH) +ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) +{ + if (banknum == 0) { /* non-CFI boot flash */ + info->portwidth = FLASH_CFI_8BIT; + info->chipwidth = FLASH_CFI_BY8; + info->interface = FLASH_CFI_X8; + return 1; + } else { + return 0; + } +} +#endif /* CONFIG_SYS_NO_FLASH */ + +#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) +void pci_init_board(void) +{ + /* should be pci_ftpci100_init() */ + extern void pci_ftpci_init(); + + pci_ftpci_init(); +} +#endif + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + ftsdc010_mmc_init(0); + return 0; +} +#endif diff --git a/board/freescale/common/p_corenet/law.c b/board/freescale/common/p_corenet/law.c index 09ef5615d2..c4566ddd4f 100644 --- a/board/freescale/common/p_corenet/law.c +++ b/board/freescale/common/p_corenet/law.c @@ -48,6 +48,19 @@ struct law_entry law_table[] = { #ifdef CONFIG_SYS_NAND_BASE_PHYS SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), #endif +#ifdef CONFIG_SRIOBOOT_SLAVE +#if defined(CONFIG_SRIOBOOT_SLAVE_PORT0) + SET_LAW(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS, + LAW_SIZE_1M, LAW_TRGT_IF_RIO_1), + SET_LAW(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS, + LAW_SIZE_1M, LAW_TRGT_IF_RIO_1), +#elif defined(CONFIG_SRIOBOOT_SLAVE_PORT1) + SET_LAW(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS, + LAW_SIZE_1M, LAW_TRGT_IF_RIO_2), + SET_LAW(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS, + LAW_SIZE_1M, LAW_TRGT_IF_RIO_2), +#endif +#endif }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/common/p_corenet/tlb.c b/board/freescale/common/p_corenet/tlb.c index 6a0026a2cf..da2162728f 100644 --- a/board/freescale/common/p_corenet/tlb.c +++ b/board/freescale/common/p_corenet/tlb.c @@ -66,6 +66,15 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_1M, 1), +#elif defined(CONFIG_SRIOBOOT_SLAVE) + /* + * SRIOBOOT-SLAVE. When slave boot, the address of the + * space is at 0xfff00000, it covered the 0xfffff000. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_SRIOBOOT_SLAVE_ADDR, + CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, + 0, 0, BOOKE_PAGESZ_1M, 1), #else SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, @@ -138,6 +147,16 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 16, BOOKE_PAGESZ_1M, 1), #endif +#ifdef CONFIG_SRIOBOOT_SLAVE + /* + * SRIOBOOT-SLAVE. 1M space from 0xffe00000 for fetching ucode + * and ENV from master + */ + SET_TLB_ENTRY(1, CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR, + CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, + 0, 17, BOOKE_PAGESZ_1M, 1), +#endif }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c index b1eecc495d..a33c936fa0 100644 --- a/board/freescale/corenet_ds/corenet_ds.c +++ b/board/freescale/corenet_ds/corenet_ds.c @@ -62,10 +62,6 @@ int checkboard (void) else printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH); -#ifdef CONFIG_PHYS_64BIT - puts("36-bit Addressing\n"); -#endif - /* Display the RCW, so that no one gets confused as to what RCW * we're actually using for this boot. */ diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c index c9f85c857b..6d0bfde232 100644 --- a/board/freescale/mpc8536ds/mpc8536ds.c +++ b/board/freescale/mpc8536ds/mpc8536ds.c @@ -68,12 +68,7 @@ int checkboard (void) u8 vboot; u8 *pixis_base = (u8 *)PIXIS_BASE; - puts("Board: MPC8536DS "); -#ifdef CONFIG_PHYS_64BIT - puts("(36-bit addrmap) "); -#endif - - printf ("Sys ID: 0x%02x, " + printf("Board: MPC8536DS Sys ID: 0x%02x, " "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER), in_8(pixis_base + PIXIS_PVER)); diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index b20299e36f..33a02ba8d3 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -45,11 +45,7 @@ int checkboard (void) u8 vboot; u8 *pixis_base = (u8 *)PIXIS_BASE; - puts ("Board: MPC8572DS "); -#ifdef CONFIG_PHYS_64BIT - puts ("(36-bit addrmap) "); -#endif - printf ("Sys ID: 0x%02x, " + printf("Board: MPC8572DS Sys ID: 0x%02x, " "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER), in_8(pixis_base + PIXIS_PVER)); diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c index 455569e422..6a0a3a2b37 100644 --- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c +++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c @@ -50,9 +50,6 @@ int checkboard(void) else puts ("Promjet\n"); -#ifdef CONFIG_PHYS_64BIT - printf (" 36-bit physical address map\n"); -#endif return 0; } diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c index e5d8423df0..36c8545059 100644 --- a/board/freescale/p1010rdb/ddr.c +++ b/board/freescale/p1010rdb/ddr.c @@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR; -#ifndef CONFIG_DDR_RAW_TIMING +#ifndef CONFIG_SYS_DDR_RAW_TIMING #define CONFIG_SYS_DRAM_SIZE 1024 fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = { @@ -165,7 +165,7 @@ phys_size_t fixed_sdram(void) return ddr_size; } -#else /* CONFIG_DDR_RAW_TIMING */ +#else /* CONFIG_SYS_DDR_RAW_TIMING */ /* * Samsung K4B2G0846C-HCF8 * The following timing are for "downshift" @@ -247,4 +247,4 @@ void fsl_ddr_board_options(memctl_options_t *popts, } } -#endif /* CONFIG_DDR_RAW_TIMING */ +#endif /* CONFIG_SYS_DDR_RAW_TIMING */ diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c index b9e66f7fa7..79a6ead7dd 100644 --- a/board/freescale/p1010rdb/p1010rdb.c +++ b/board/freescale/p1010rdb/p1010rdb.c @@ -165,11 +165,7 @@ int checkboard(void) struct cpu_type *cpu; cpu = gd->cpu; - printf("Board: %sRDB ", cpu->name); -#ifdef CONFIG_PHYS_64BIT - puts("(36-bit addrmap)"); -#endif - puts("\n"); + printf("Board: %sRDB\n", cpu->name); return 0; } diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c index 456d9b0e34..aca30f3680 100644 --- a/board/freescale/p1022ds/p1022ds.c +++ b/board/freescale/p1022ds/p1022ds.c @@ -56,12 +56,8 @@ int checkboard(void) { u8 sw; - puts("Board: P1022DS "); -#ifdef CONFIG_PHYS_64BIT - puts("(36-bit addrmap) "); -#endif - - printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", + printf("Board: P1022DS Sys ID: 0x%02x, " + "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH)); diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c index 546819cb59..082976a924 100644 --- a/board/freescale/p1023rds/p1023rds.c +++ b/board/freescale/p1023rds/p1023rds.c @@ -197,6 +197,12 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); + /* By default NOR is on, and NAND is disabled */ +#ifdef CONFIG_NAND_U_BOOT + do_fixup_by_path_string(blob, "nor_flash", "status", "disabled"); + do_fixup_by_path_string(blob, "nand_flash", "status", "okay"); +#endif + fdt_fixup_fman_ethernet(blob); } #endif diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c index cfbae69119..437eaf0fdd 100644 --- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c +++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c @@ -110,9 +110,7 @@ int checkboard (void) cpu = gd->cpu; printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev); -#ifdef CONFIG_PHYS_64BIT - puts ("(36-bit addrmap) \n"); -#endif + setbits_be32(&pgpio->gpdir, GPIO_DIR); /* diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c index f0cbde72ab..88ba56f457 100644 --- a/board/freescale/p1_p2_rdb_pc/ddr.c +++ b/board/freescale/p1_p2_rdb_pc/ddr.c @@ -15,7 +15,7 @@ #include <asm/io.h> #include <asm/fsl_law.h> -#ifdef CONFIG_DDR_RAW_TIMING +#ifdef CONFIG_SYS_DDR_RAW_TIMING #if defined(CONFIG_P1020RDB_PROTO) || \ defined(CONFIG_P1021RDB) || \ defined(CONFIG_P1020UTM) @@ -204,7 +204,7 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, return 0; } -#endif /* CONFIG_DDR_RAW_TIMING */ +#endif /* CONFIG_SYS_DDR_RAW_TIMING */ /* Fixed sdram init -- doesn't use serial presence detect. */ phys_size_t fixed_sdram(void) diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c index a60c5a20a9..aa39260ca7 100644 --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c @@ -225,13 +225,7 @@ int checkboard(void) ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); u8 in, out, io_config, val; - printf("Board: %s ", CONFIG_BOARDNAME); - -#ifdef CONFIG_PHYS_64BIT - puts("(36-bit addrmap) "); -#endif - - printf("CPLD: V%d.%d PCBA: V%d.0\n", + printf("Board: %s CPLD: V%d.%d PCBA: V%d.0\n", CONFIG_BOARDNAME, in_8(&cpld_data->cpld_rev_major) & 0x0F, in_8(&cpld_data->cpld_rev_minor) & 0x0F, in_8(&cpld_data->pcba_rev) & 0x0F); diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index d3af6cf185..e8d31a4acf 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -61,12 +61,8 @@ int checkboard(void) { u8 sw; - puts("Board: P2020DS "); -#ifdef CONFIG_PHYS_64BIT - puts("(36-bit addrmap) "); -#endif - - printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", + printf("Board: P2020DS Sys ID: 0x%02x, " + "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH)); diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c index 1f6a34b3d9..976c8d290b 100644 --- a/board/freescale/p2041rdb/p2041rdb.c +++ b/board/freescale/p2041rdb/p2041rdb.c @@ -54,10 +54,6 @@ int checkboard(void) sw = CPLD_READ(fbank_sel); printf("vBank: %d\n", sw & 0x1); -#ifdef CONFIG_PHYS_64BIT - puts("36-bit Addressing\n"); -#endif - /* * Display the RCW, so that no one gets confused as to what RCW * we're actually using for this boot. diff --git a/board/freescale/p3060qds/p3060qds.c b/board/freescale/p3060qds/p3060qds.c index c6c74f2004..c7cca2a0cc 100644 --- a/board/freescale/p3060qds/p3060qds.c +++ b/board/freescale/p3060qds/p3060qds.c @@ -68,9 +68,6 @@ int checkboard(void) else printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH); -#ifdef CONFIG_PHYS_64BIT - puts("36-bit Addressing\n"); -#endif puts("Reset Configuration Word (RCW):"); for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { u32 rcw = in_be32(&gur->rcwsr[i]); diff --git a/board/gdsys/405ep/405ep.c b/board/gdsys/405ep/405ep.c index 8b80533d98..bc9b7d0a97 100644 --- a/board/gdsys/405ep/405ep.c +++ b/board/gdsys/405ep/405ep.c @@ -28,12 +28,9 @@ #include <asm/ppc4xx-gpio.h> #include <asm/global_data.h> +#include "405ep.h" #include <gdsys_fpga.h> -#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE) -#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100) -#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) - #define REFLECTION_TESTPATTERN 0xdede #define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff) @@ -55,7 +52,6 @@ void print_fpga_state(unsigned dev) int board_early_init_f(void) { unsigned k; - unsigned ctr; for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) gd->fpga_state[k] = 0; @@ -73,26 +69,29 @@ int board_early_init_f(void) * -> ca. 15 us */ mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */ + return 0; +} - /* - * setup io-latches for reset - */ - out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); - out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); +int board_early_init_r(void) +{ + unsigned k; + unsigned ctr; - /* - * set "startup-finished"-gpios - */ - gpio_write_bit(21, 0); - gpio_write_bit(22, 1); + for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) + gd->fpga_state[k] = 0; /* - * wait for fpga-done + * reset FPGA */ + gd405ep_init(); + + gd405ep_set_fpga_reset(1); + + gd405ep_setup_hw(); + for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) { ctr = 0; - while (!(in_le16((void *)LATCH2_BASE) - & CONFIG_SYS_FPGA_DONE(k))) { + while (!gd405ep_get_fpga_done(k)) { udelay(100000); if (ctr++ > 5) { gd->fpga_state[k] |= FPGA_STATE_DONE_FAILED; @@ -101,15 +100,13 @@ int board_early_init_f(void) } } - /* - * setup io-latches for boot (stop reset) - */ udelay(10); - out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); - out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); + + gd405ep_set_fpga_reset(0); for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) { - ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(k); + struct ihs_fpga *fpga = + (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(k); #ifdef CONFIG_SYS_FPGA_NO_RFL_HI u16 *reflection_target = &fpga->reflection_low; #else diff --git a/board/gdsys/405ep/405ep.h b/board/gdsys/405ep/405ep.h new file mode 100644 index 0000000000..5647dbc62b --- /dev/null +++ b/board/gdsys/405ep/405ep.h @@ -0,0 +1,10 @@ +#ifndef __405EP_H_ +#define __405EP_H_ + +/* functions to be provided by board implementation */ +void gd405ep_init(void); +void gd405ep_set_fpga_reset(unsigned state); +void gd405ep_setup_hw(void); +int gd405ep_get_fpga_done(unsigned fpga); + +#endif /* __405EP_H_ */ diff --git a/board/gdsys/405ep/Makefile b/board/gdsys/405ep/Makefile index feb5cecf0b..38e5ea4e1d 100644 --- a/board/gdsys/405ep/Makefile +++ b/board/gdsys/405ep/Makefile @@ -25,6 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o +COBJS-$(CONFIG_NEO) += neo.o COBJS-$(CONFIG_IO) += io.o COBJS-$(CONFIG_IOCON) += iocon.o COBJS-$(CONFIG_DLVISION_10G) += dlvision-10g.o diff --git a/board/gdsys/405ep/dlvision-10g.c b/board/gdsys/405ep/dlvision-10g.c index f55afbd129..644493baaf 100644 --- a/board/gdsys/405ep/dlvision-10g.c +++ b/board/gdsys/405ep/dlvision-10g.c @@ -26,16 +26,20 @@ #include <asm/processor.h> #include <asm/io.h> #include <asm/ppc4xx-gpio.h> +#include <dtt.h> +#include "405ep.h" #include <gdsys_fpga.h> #include "../common/osd.h" +#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE) +#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100) #define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) -#define LATCH2_MC2_PRESENT_N 0x0080 - #define LATCH3_BASE (CONFIG_SYS_LATCH_BASE + 0x300) +#define LATCH2_MC2_PRESENT_N 0x0080 + enum { UNITTYPE_VIDEO_USER = 0, UNITTYPE_MAIN_USER = 1, @@ -46,6 +50,8 @@ enum { enum { HWVER_101 = 0, HWVER_110 = 1, + HWVER_120 = 2, + HWVER_130 = 3, }; enum { @@ -65,6 +71,14 @@ enum { RAM_DDR2_64 = 2, }; +int misc_init_r(void) +{ + /* startup fans */ + dtt_init(); + + return 0; +} + static unsigned int get_hwver(void) { u16 latch3 = in_le16((void *)LATCH3_BASE); @@ -81,7 +95,7 @@ static unsigned int get_mc2_present(void) static void print_fpga_info(unsigned dev) { - ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(dev); + struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(dev); u16 versions = in_le16(&fpga->versions); u16 fpga_version = in_le16(&fpga->fpga_version); u16 fpga_features = in_le16(&fpga->fpga_features); @@ -146,7 +160,15 @@ static void print_fpga_info(unsigned dev) break; case HWVER_110: - printf(" HW-Ver 1.10\n"); + printf(" HW-Ver 1.10-1.12\n"); + break; + + case HWVER_120: + printf(" HW-Ver 1.20\n"); + break; + + case HWVER_130: + printf(" HW-Ver 1.30\n"); break; default: @@ -223,32 +245,31 @@ static void print_fpga_info(unsigned dev) */ int checkboard(void) { - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); + char *s = getenv("serial#"); - printf("Board: "); + puts("Board: "); - printf("DLVision 10G"); + puts("DLVision 10G"); - if (i > 0) { + if (s != NULL) { puts(", serial# "); - puts(buf); + puts(s); } puts("\n"); - print_fpga_info(0); - if (get_mc2_present()) - print_fpga_info(1); - return 0; } int last_stage_init(void) { - ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(0); + struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); u16 versions = in_le16(&fpga->versions); + print_fpga_info(0); + if (get_mc2_present()) + print_fpga_info(1); + if (((versions >> 4) & 0x000f) != UNITTYPE_MAIN_USER) return 0; @@ -261,3 +282,32 @@ int last_stage_init(void) return 0; } + +void gd405ep_init(void) +{ +} + +void gd405ep_set_fpga_reset(unsigned state) +{ + if (state) { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); + } else { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); + } +} + +void gd405ep_setup_hw(void) +{ + /* + * set "startup-finished"-gpios + */ + gpio_write_bit(21, 0); + gpio_write_bit(22, 1); +} + +int gd405ep_get_fpga_done(unsigned fpga) +{ + return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga); +} diff --git a/board/gdsys/405ep/io.c b/board/gdsys/405ep/io.c index db1ea7f0c5..070dcbbdfc 100644 --- a/board/gdsys/405ep/io.c +++ b/board/gdsys/405ep/io.c @@ -27,10 +27,16 @@ #include <asm/io.h> #include <asm/ppc4xx-gpio.h> +#include <dtt.h> #include <miiphy.h> +#include "405ep.h" #include <gdsys_fpga.h> +#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE) +#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100) +#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) + #define PHYREG_CONTROL 0 #define PHYREG_PAGE_ADDRESS 22 #define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1 16 @@ -47,6 +53,14 @@ enum { HWVER_122 = 3, }; +int misc_init_r(void) +{ + /* startup fans */ + dtt_init(); + + return 0; +} + int configure_gbit_phy(unsigned char addr) { unsigned short value; @@ -87,9 +101,23 @@ err_out: */ int checkboard(void) { - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(0); + char *s = getenv("serial#"); + + puts("Board: CATCenter Io"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + + puts("\n"); + + return 0; +} + +static void print_fpga_info(void) +{ + struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); u16 versions = in_le16(&fpga->versions); u16 fpga_version = in_le16(&fpga->fpga_version); u16 fpga_features = in_le16(&fpga->fpga_features); @@ -103,15 +131,7 @@ int checkboard(void) feature_channels = fpga_features & 0x007f; feature_expansion = fpga_features & (1<<15); - printf("Board: "); - - printf("CATCenter Io"); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - puts("\n "); + puts("FPGA: "); switch (unit_type) { case UNITTYPE_CCD_SWITCH: @@ -152,8 +172,6 @@ int checkboard(void) printf(" %d channel(s)", feature_channels); printf(", expansion %ssupported\n", feature_expansion ? "" : "un"); - - return 0; } /* @@ -161,9 +179,11 @@ int checkboard(void) */ int last_stage_init(void) { - ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(0); + struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); unsigned int k; + print_fpga_info(); + miiphy_register(CONFIG_SYS_GBIT_MII_BUSNAME, bb_miiphy_read, bb_miiphy_write); @@ -175,3 +195,32 @@ int last_stage_init(void) return 0; } + +void gd405ep_init(void) +{ +} + +void gd405ep_set_fpga_reset(unsigned state) +{ + if (state) { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); + } else { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); + } +} + +void gd405ep_setup_hw(void) +{ + /* + * set "startup-finished"-gpios + */ + gpio_write_bit(21, 0); + gpio_write_bit(22, 1); +} + +int gd405ep_get_fpga_done(unsigned fpga) +{ + return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga); +} diff --git a/board/gdsys/405ep/iocon.c b/board/gdsys/405ep/iocon.c index ce53340894..0fc7db2012 100644 --- a/board/gdsys/405ep/iocon.c +++ b/board/gdsys/405ep/iocon.c @@ -27,10 +27,15 @@ #include <asm/io.h> #include <asm/ppc4xx-gpio.h> +#include "405ep.h" #include <gdsys_fpga.h> #include "../common/osd.h" +#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE) +#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100) +#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) + enum { UNITTYPE_MAIN_SERVER = 0, UNITTYPE_MAIN_USER = 1, @@ -69,9 +74,25 @@ enum { */ int checkboard(void) { - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(0); + char *s = getenv("serial#"); + + puts("Board: "); + + puts("IoCon"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + + puts("\n"); + + return 0; +} + +static void print_fpga_info(void) +{ + struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); u16 versions = in_le16(&fpga->versions); u16 fpga_version = in_le16(&fpga->fpga_version); u16 fpga_features = in_le16(&fpga->fpga_features); @@ -95,16 +116,6 @@ int checkboard(void) feature_carriers = (fpga_features & 0x000c) >> 2; feature_video_channels = fpga_features & 0x0003; - printf("Board: "); - - printf("IoCon"); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - puts("\n "); - switch (unit_type) { case UNITTYPE_MAIN_USER: printf("Mainchannel"); @@ -205,12 +216,12 @@ int checkboard(void) printf(", %d carrier(s)", feature_carriers); printf(", %d video channel(s)\n", feature_video_channels); - - return 0; } int last_stage_init(void) { + print_fpga_info(); + return osd_probe(0); } @@ -231,3 +242,32 @@ int fpga_gpio_get(int pin) { return in_le16((void *)(CONFIG_SYS_FPGA0_BASE + 0x14)) & pin; } + +void gd405ep_init(void) +{ +} + +void gd405ep_set_fpga_reset(unsigned state) +{ + if (state) { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); + } else { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); + } +} + +void gd405ep_setup_hw(void) +{ + /* + * set "startup-finished"-gpios + */ + gpio_write_bit(21, 0); + gpio_write_bit(22, 1); +} + +int gd405ep_get_fpga_done(unsigned fpga) +{ + return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga); +} diff --git a/board/gdsys/405ep/neo.c b/board/gdsys/405ep/neo.c new file mode 100644 index 0000000000..d336e55c5d --- /dev/null +++ b/board/gdsys/405ep/neo.c @@ -0,0 +1,161 @@ +/* + * (C) Copyright 2011 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/ppc4xx-gpio.h> +#include <dtt.h> + +#include "405ep.h" +#include <gdsys_fpga.h> + +#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE) +#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100) +#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) + +enum { + UNITTYPE_CCX16 = 1, + UNITTYPE_CCIP216 = 2, +}; + +enum { + HWVER_300 = 3, +}; + +int misc_init_r(void) +{ + /* startup fans */ + dtt_init(); + + return 0; +} + +int checkboard(void) +{ + char *s = getenv("serial#"); + + puts("Board: CATCenter Neo"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + + puts("\n"); + + return 0; +} + +static void print_fpga_info(void) +{ + struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); + u16 versions = in_le16(&fpga->versions); + u16 fpga_version = in_le16(&fpga->fpga_version); + u16 fpga_features = in_le16(&fpga->fpga_features); + int fpga_state = get_fpga_state(0); + unsigned unit_type; + unsigned hardware_version; + unsigned feature_channels; + + puts("FPGA: "); + if (fpga_state & FPGA_STATE_DONE_FAILED) { + printf(" done timed out\n"); + return; + } + + if (fpga_state & FPGA_STATE_REFLECTION_FAILED) { + printf(" refelectione test failed\n"); + return; + } + + unit_type = (versions & 0xf000) >> 12; + hardware_version = versions & 0x000f; + feature_channels = fpga_features & 0x007f; + + switch (unit_type) { + case UNITTYPE_CCX16: + printf("CCX-Switch"); + break; + + default: + printf("UnitType %d(not supported)", unit_type); + break; + } + + switch (hardware_version) { + case HWVER_300: + printf(" HW-Ver 3.00-3.12\n"); + break; + + default: + printf(" HW-Ver %d(not supported)\n", + hardware_version); + break; + } + + printf(" FPGA V %d.%02d, features:", + fpga_version / 100, fpga_version % 100); + + printf(" %d channel(s)\n", feature_channels); +} + +int last_stage_init(void) +{ + print_fpga_info(); + + return 0; +} + +void gd405ep_init(void) +{ +} + +void gd405ep_set_fpga_reset(unsigned state) +{ + if (state) { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); + } else { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); + } +} + +void gd405ep_setup_hw(void) +{ + /* + * set "startup-finished"-gpios + */ + gpio_write_bit(21, 0); + gpio_write_bit(22, 1); +} + +int gd405ep_get_fpga_done(unsigned fpga) +{ + /* + * Neo hardware has no FPGA-DONE GPIO + */ + return 1; +} diff --git a/board/gdsys/405ex/405ex.c b/board/gdsys/405ex/405ex.c index 0d25214f42..5766c0f562 100644 --- a/board/gdsys/405ex/405ex.c +++ b/board/gdsys/405ex/405ex.c @@ -219,7 +219,8 @@ int board_early_init_r(void) gd405ex_set_fpga_reset(0); for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) { - ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(k); + struct ihs_fpga *fpga = + (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(k); #ifdef CONFIG_SYS_FPGA_NO_RFL_HI u16 *reflection_target = &fpga->reflection_low; #else diff --git a/board/gdsys/405ex/io64.c b/board/gdsys/405ex/io64.c index 177141dcc3..41fdef7da8 100644 --- a/board/gdsys/405ex/io64.c +++ b/board/gdsys/405ex/io64.c @@ -100,7 +100,7 @@ int misc_init_r(void) static void print_fpga_info(unsigned dev) { - ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(dev); + struct ihs_fpga *fpga = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(dev); u16 versions = in_le16(&fpga->versions); u16 fpga_version = in_le16(&fpga->fpga_version); u16 fpga_features = in_le16(&fpga->fpga_features); @@ -242,8 +242,8 @@ int last_stage_init(void) { unsigned int k; unsigned int fpga; - ihs_fpga_t *fpga0 = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(0); - ihs_fpga_t *fpga1 = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(1); + struct ihs_fpga *fpga0 = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(0); + struct ihs_fpga *fpga1 = (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(1); int failed = 0; char str_phys[] = "Setup PHYs -"; char str_serdes[] = "Start SERDES blocks"; diff --git a/board/gdsys/common/osd.c b/board/gdsys/common/osd.c index 5065f9d5e4..a192c9851b 100644 --- a/board/gdsys/common/osd.c +++ b/board/gdsys/common/osd.c @@ -70,8 +70,8 @@ enum { #if defined(CONFIG_SYS_ICS8N3QV01) || defined(CONFIG_SYS_SIL1178) static void fpga_iic_write(unsigned screen, u8 slave, u8 reg, u8 data) { - ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen); - ihs_i2c_t *i2c = &fpga->i2c; + struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen); + struct ihs_i2c *i2c = &fpga->i2c; while (in_le16(&fpga->extended_interrupt) & (1 << 12)) ; @@ -81,8 +81,8 @@ static void fpga_iic_write(unsigned screen, u8 slave, u8 reg, u8 data) static u8 fpga_iic_read(unsigned screen, u8 slave, u8 reg) { - ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen); - ihs_i2c_t *i2c = &fpga->i2c; + struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen); + struct ihs_i2c *i2c = &fpga->i2c; unsigned int ctr = 0; while (in_le16(&fpga->extended_interrupt) & (1 << 12)) @@ -129,7 +129,7 @@ static void mpc92469ac_calc_parameters(unsigned int fout, static void mpc92469ac_set(unsigned screen, unsigned int fout) { - ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen); + struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen); unsigned int n; unsigned int m; unsigned int bitval = 0; @@ -265,8 +265,8 @@ static void ics8n3qv01_set(unsigned screen, unsigned int fout) static int osd_write_videomem(unsigned screen, unsigned offset, u16 *data, size_t charcount) { - ihs_fpga_t *fpga = - (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen); + struct ihs_fpga *fpga = + (struct ihs_fpga *) CONFIG_SYS_FPGA_BASE(screen); unsigned int k; for (k = 0; k < charcount; ++k) { @@ -318,8 +318,8 @@ static int osd_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) int osd_probe(unsigned screen) { - ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(screen); - ihs_osd_t *osd = &fpga->osd; + struct ihs_fpga *fpga = (struct ihs_fpga *)CONFIG_SYS_FPGA_BASE(screen); + struct ihs_osd *osd = &fpga->osd; u16 version = in_le16(&osd->version); u16 features = in_le16(&osd->features); unsigned width; diff --git a/board/gdsys/neo/neo.c b/board/gdsys/neo/neo.c deleted file mode 100644 index d21d599fa7..0000000000 --- a/board/gdsys/neo/neo.c +++ /dev/null @@ -1,102 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <command.h> -#include <asm/processor.h> -#include <asm/io.h> - -#define HWTYPE_CCX16 1 -#define HWREV_300 3 - -int board_early_init_f(void) -{ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - mtdcr(UIC0ER, 0x00000000); /* disable all ints */ - mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical */ - mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ - mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ - mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest prio */ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - - /* - * EBC Configuration Register: set ready timeout to 512 ebc-clks - * -> ca. 15 us - */ - mtebc(EBC0_CFG, 0xa8400000); /* ebc always driven */ - - return 0; -} - -/* - * Check Board Identity: - */ -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - u16 val = in_le16((void *)CONFIG_FPGA_BASE + 2); - u8 unit_type; - u8 hardware_cpu_ports; - u8 hardware_con_ports; - u8 hardware_version; - - printf("Board: CATCenter Neo"); - - if (i > 0) { - puts(", serial# "); - puts(buf); - } - puts("\n "); - - unit_type = (val & 0xf000) >> 12; - hardware_cpu_ports = ((val & 0x0f00) >> 8) * 8; - hardware_con_ports = ((val & 0x00f0) >> 4) * 2; - hardware_version = val & 0x000f; - - switch (unit_type) { - case HWTYPE_CCX16: - printf("CCX16-FPGA (80 UARTs)"); - break; - - default: - printf("UnitType %d, unsupported", unit_type); - break; - } - - printf(", %d cpu ports, %d console ports,", - hardware_cpu_ports, hardware_con_ports); - - switch (hardware_version) { - case HWREV_300: - printf(" HW-Ver 3.00\n"); - break; - - default: - printf(" HW-Ver %d, unsupported\n", - hardware_version); - break; - } - - return 0; -} diff --git a/boards.cfg b/boards.cfg index 3cf75c3151..5f328b586d 100644 --- a/boards.cfg +++ b/boards.cfg @@ -370,6 +370,7 @@ incaip_150MHz mips mips32 incaip - qi_lb60 mips xburst qi_lb60 qi adp-ag101 nds32 n1213 adp-ag101 AndesTech ag101 adp-ag101p nds32 n1213 adp-ag101p AndesTech ag101 +adp-ag102 nds32 n1213 adp-ag102 AndesTech ag102 nios2-generic nios2 nios2 nios2-generic altera PCI5441 nios2 nios2 pci5441 psyent PK1C20 nios2 nios2 pk1c20 psyent @@ -742,6 +743,7 @@ P2020RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freesca P2020RDB_SDCARD powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SDCARD P2020RDB_SPIFLASH powerpc mpc85xx p1_p2_rdb freescale - P1_P2_RDB:P2020RDB,SPIFLASH P2041RDB powerpc mpc85xx p2041rdb freescale +P2041RDB_NAND powerpc mpc85xx p2041rdb freescale - P2041RDB:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 P2041RDB_SDCARD powerpc mpc85xx p2041rdb freescale - P2041RDB:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 P2041RDB_SECURE_BOOT powerpc mpc85xx p2041rdb freescale - P2041RDB:SECURE_BOOT P2041RDB_SPIFLASH powerpc mpc85xx p2041rdb freescale - P2041RDB:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 @@ -750,6 +752,8 @@ P3041DS_NAND powerpc mpc85xx corenet_ds freescale - P3041DS_SDCARD powerpc mpc85xx corenet_ds freescale - P3041DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 P3041DS_SECURE_BOOT powerpc mpc85xx corenet_ds freescale - P3041DS:SECURE_BOOT P3041DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P3041DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 +P3041DS_SRIOBOOT_MASTER powerpc mpc85xx corenet_ds freescale - P3041DS:SRIOBOOT_MASTER +P3041DS_SRIOBOOT_SLAVE powerpc mpc85xx corenet_ds freescale - P3041DS:SRIOBOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 P3060QDS powerpc mpc85xx p3060qds freescale P3060QDS_NAND powerpc mpc85xx p3060qds freescale - P3060QDS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 P3060QDS_SECURE_BOOT powerpc mpc85xx p3060qds freescale - P3060QDS:SECURE_BOOT @@ -757,11 +761,15 @@ P4080DS powerpc mpc85xx corenet_ds freesca P4080DS_SDCARD powerpc mpc85xx corenet_ds freescale - P4080DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 P4080DS_SECURE_BOOT powerpc mpc85xx corenet_ds freescale - P4080DS:SECURE_BOOT P4080DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P4080DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 +P4080DS_SRIOBOOT_MASTER powerpc mpc85xx corenet_ds freescale - P4080DS:SRIOBOOT_MASTER +P4080DS_SRIOBOOT_SLAVE powerpc mpc85xx corenet_ds freescale - P4080DS:SRIOBOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 P5020DS powerpc mpc85xx corenet_ds freescale P5020DS_NAND powerpc mpc85xx corenet_ds freescale - P5020DS:RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 P5020DS_SDCARD powerpc mpc85xx corenet_ds freescale - P5020DS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 P5020DS_SECURE_BOOT powerpc mpc85xx corenet_ds freescale - P5020DS:SECURE_BOOT P5020DS_SPIFLASH powerpc mpc85xx corenet_ds freescale - P5020DS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 +P5020DS_SRIOBOOT_MASTER powerpc mpc85xx corenet_ds freescale - P5020DS:SRIOBOOT_MASTER +P5020DS_SRIOBOOT_SLAVE powerpc mpc85xx corenet_ds freescale - P5020DS:SRIOBOOT_SLAVE,SYS_TEXT_BASE=0xFFF80000 stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M @@ -982,7 +990,7 @@ intip powerpc ppc4xx intip gdsys io powerpc ppc4xx 405ep gdsys io64 powerpc ppc4xx 405ex gdsys iocon powerpc ppc4xx 405ep gdsys -neo powerpc ppc4xx - gdsys +neo powerpc ppc4xx 405ep gdsys icon powerpc ppc4xx - mosaixtech MIP405 powerpc ppc4xx mip405 mpl MIP405T powerpc ppc4xx mip405 mpl - MIP405:MIP405T diff --git a/common/Makefile b/common/Makefile index d9f10f3f6e..6e23baaf61 100644 --- a/common/Makefile +++ b/common/Makefile @@ -59,6 +59,7 @@ COBJS-$(CONFIG_ENV_IS_IN_NAND) += env_nand.o COBJS-$(CONFIG_ENV_IS_IN_NVRAM) += env_nvram.o COBJS-$(CONFIG_ENV_IS_IN_ONENAND) += env_onenand.o COBJS-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o +COBJS-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o COBJS-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o # command diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 5359a47859..3ab285bc73 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -119,6 +119,14 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_mhz("pevfreq", bd->bi_pevfreq); #endif +#ifdef CONFIG_ENABLE_36BIT_PHYS +#ifdef CONFIG_PHYS_64BIT + puts("addressing = 36-bit\n"); +#else + puts("addressing = 32-bit\n"); +#endif +#endif + print_eth(0); #if defined(CONFIG_HAS_ETH1) print_eth(1); diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index b1494dcb0c..e1ccdd8f7e 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -66,9 +66,10 @@ DECLARE_GLOBAL_DATA_PTR; !defined(CONFIG_ENV_IS_IN_NVRAM) && \ !defined(CONFIG_ENV_IS_IN_ONENAND) && \ !defined(CONFIG_ENV_IS_IN_SPI_FLASH) && \ + !defined(CONFIG_ENV_IS_IN_REMOTE) && \ !defined(CONFIG_ENV_IS_NOWHERE) # error Define one of CONFIG_ENV_IS_IN_{EEPROM|FLASH|DATAFLASH|ONENAND|\ -SPI_FLASH|MG_DISK|NVRAM|MMC|FAT} or CONFIG_ENV_IS_NOWHERE +SPI_FLASH|MG_DISK|NVRAM|MMC|FAT|REMOTE} or CONFIG_ENV_IS_NOWHERE #endif #define XMK_STR(x) #x diff --git a/common/env_remote.c b/common/env_remote.c new file mode 100644 index 0000000000..3bf0f957b3 --- /dev/null +++ b/common/env_remote.c @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2011-2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* #define DEBUG */ + +#include <common.h> +#include <command.h> +#include <environment.h> +#include <linux/stddef.h> + +char *env_name_spec = "Remote"; + +#ifdef ENV_IS_EMBEDDED +env_t *env_ptr = &environment; +#else /* ! ENV_IS_EMBEDDED */ +env_t *env_ptr = (env_t *)CONFIG_ENV_ADDR; +#endif /* ENV_IS_EMBEDDED */ + +DECLARE_GLOBAL_DATA_PTR; + +#if !defined(CONFIG_ENV_OFFSET) +#define CONFIG_ENV_OFFSET 0 +#endif + +uchar env_get_char_spec(int index) +{ + return *((uchar *)(gd->env_addr + index)); +} + +int env_init(void) +{ + if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) { + gd->env_addr = (ulong)&(env_ptr->data); + gd->env_valid = 1; + return 0; + } + + gd->env_addr = (ulong)default_environment; + gd->env_valid = 0; + return 0; +} + +#ifdef CONFIG_CMD_SAVEENV +int saveenv(void) +{ +#ifdef CONFIG_SRIOBOOT_SLAVE + printf("Can not support the 'saveenv' when boot from SRIO!\n"); + return 1; +#else + return 0; +#endif +} +#endif /* CONFIG_CMD_SAVEENV */ + +void env_relocate_spec(void) +{ +#ifndef ENV_IS_EMBEDDED + env_import((char *)env_ptr, 1); +#endif +} diff --git a/common/image.c b/common/image.c index 342b315918..91954ac54b 100644 --- a/common/image.c +++ b/common/image.c @@ -1829,7 +1829,7 @@ static int fit_parse_spec(const char *spec, char sepc, ulong addr_curr, * addr and conf_name are set accordingly * 0 otherwise */ -inline int fit_parse_conf(const char *spec, ulong addr_curr, +int fit_parse_conf(const char *spec, ulong addr_curr, ulong *addr, const char **conf_name) { return fit_parse_spec(spec, '#', addr_curr, addr, conf_name); @@ -1855,7 +1855,7 @@ inline int fit_parse_conf(const char *spec, ulong addr_curr, * addr and image_name are set accordingly * 0 otherwise */ -inline int fit_parse_subimage(const char *spec, ulong addr_curr, +int fit_parse_subimage(const char *spec, ulong addr_curr, ulong *addr, const char **image_name) { return fit_parse_spec(spec, ':', addr_curr, addr, image_name); diff --git a/doc/README.ag102 b/doc/README.ag102 new file mode 100644 index 0000000000..7d142a70d1 --- /dev/null +++ b/doc/README.ag102 @@ -0,0 +1,36 @@ +Andes Technology SoC AG102 +========================== + +AG102 is the second SoC produced by Andes Technology using N1213 CPU core +with FPU and DDR contoller support. +AG102 has integrated both AHB and APB bus and many periphals for application +and product development. + +ADP-AG102 +========= + +ADP-AG102 is the SoC with AG102 hardcore CPU. + +Configurations +============== + +CONFIG_MEM_REMAP: + Doing memory remap is essential for preparing some non-OS or RTOS + applications. + +CONFIG_SKIP_LOWLEVEL_INIT: + If you want to boot this system from SPI ROM and bypass e-bios (the + other boot loader on ROM). You should undefine CONFIG_SKIP_LOWLEVEL_INIT + in "include/configs/adp-ag102.h". + +Build and boot steps +==================== + +build: +1. Prepare the toolchains and make sure the $PATH to toolchains is correct. +2. Use `make adp-ag102` in u-boot root to build the image. + +Burn u-boot to SPI ROM: +==================== + +This section will be added later. diff --git a/doc/README.srio-boot-corenet b/doc/README.srio-boot-corenet new file mode 100644 index 0000000000..56b094c9a2 --- /dev/null +++ b/doc/README.srio-boot-corenet @@ -0,0 +1,103 @@ +------------------------------ +SRIO Boot on Corenet Platforms +------------------------------ + +For some PowerPC processors with SRIO interface, boot location can be configured +to SRIO by RCW. The processor booting from SRIO can do without flash for u-boot +image, ucode and ENV. All the images can be fetched from another processor's +memory space by SRIO link connected between them. + +This document describes the processes based on an example implemented on P4080DS +platforms and a RCW example with boot from SRIO configuration. + +Environment of the SRIO boot: + a) Master and slave can be SOCs in one board or SOCs in separate boards. + b) They are connected with SRIO links, whether 1x or 4x, and directly or + through switch system. + c) Only Master has NorFlash for booting, and all the Master's and Slave's + U-Boot images, UCodes will be stored in this flash. + d) Slave has its own EEPROM for RCW and PBI. + e) Slave's RCW should configure the SerDes for SRIO boot port, set the boot + location to SRIO, and holdoff all the cores if needed. + + ---------- ----------- ----------- + | | | | | | + | | | | | | + | NorFlash|<----->| Master | SRIO | Slave |<---->[EEPROM] + | | | |<===========>| | + | | | | | | + ---------- ----------- ----------- + +The example based on P4080DS platform: + Two P4080DS platforms can be used to implement the boot from SRIO. Their SRIO + ports 0 will be connected directly and will be used for the boot from SRIO. + + 1. Slave's RCW example for boot from SRIO port 0 and core 0 not in holdoff. + 00000000: aa55 aa55 010e 0100 0c58 0000 0000 0000 + 00000010: 1818 1818 0000 8888 7440 4000 0000 2000 + 00000020: f400 0000 0100 0000 0000 0000 0000 0000 + 00000030: 0000 0000 0083 0000 0000 0000 0000 0000 + 00000040: 0000 0000 0000 0000 0813 8040 698b 93fe + + 2. Slave's RCW example for boot from SRIO port 0 and all cores in holdoff. + 00000000: aa55 aa55 010e 0100 0c58 0000 0000 0000 + 00000010: 1818 1818 0000 8888 7440 4000 0000 2000 + 00000020: f440 0000 0100 0000 0000 0000 0000 0000 + 00000030: 0000 0000 0083 0000 0000 0000 0000 0000 + 00000040: 0000 0000 0000 0000 0813 8040 063c 778f + + 3. Sequence in Step by Step. + a) Update RCW for slave with boot from SRIO port 0 configuration. + b) Program slave's U-Boot image, UCode, and ENV parameters into master's + NorFlash. + c) Start up master and it will boot up normally from its NorFlash. + Then, it will finish necessary configurations for slave's boot from + SRIO port 0. + d) Master will set inbound SRIO windows covered slave's U-Boot image stored + in master's NorFlash. + e) Master will set an inbound SRIO window covered slave's UCode stored in + master's NorFlash. + f) Master will set an inbound SRIO window covered slave's ENV stored in + master's NorFlash. + g) If need to release slave's core, master will set outbound SRIO windows + in order to configure slave's registers for the core's releasing. + h) If all cores of slave in holdoff, slave should be powered on before all + the above master's steps, and wait to be released by master. If not all + cores in holdoff, that means core 0 will start up normally, slave should + be powered on after all the above master's steps. In the startup phase + of the slave from SRIO, it will finish some necessary configurations. + i) Slave will set a specific TLB entry for the boot process. + j) Slave will set a LAW entry with the TargetID SRIO port 0 for the boot. + k) Slave will set a specific TLB entry in order to fetch UCode and ENV + from master. + l) Slave will set a LAW entry with the TargetID SRIO port 0 for UCode and ENV. + +How to use this feature: + To use this feature, you need to focus three points. + + 1. Slave's RCW with SRIO boot configurations, and all cores in holdoff + configurations if needed. + Please refer to the examples given above. + + 2. U-Boot image's compilation. + For master, U-Boot image should be generated specifically by + + make xxxx_SRIOBOOT_MASTER_config. + + For example, master U-Boot image used on P4080DS should be compiled with + + make P4080DS_SRIOBOOT_MASTER_config. + + For slave, U-Boot image should be generated specifically by + + make xxxx_SRIOBOOT_SLAVE_config. + + For example, slave U-Boot image used on P4080DS should be compiled with + + make P4080DS_SRIOBOOT_SLAVE_config. + + 3. Necessary modifications based on a specific environment. + For a specific environment, the SRIO port for boot, the addresses of the + slave's U-Boot image, UCode, ENV stored in master's NorFlash, and any other + configurations can be modified in the file: + include/configs/corenet_ds.h. diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index f86e46c111..5dbdbe3672 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -27,6 +27,7 @@ LIB := $(obj)libi2c.o COBJS-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o COBJS-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o +COBJS-$(CONFIG_DW_I2C) += designware_i2c.o COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o COBJS-$(CONFIG_I2C_MVTWSI) += mvtwsi.o COBJS-$(CONFIG_I2C_MV) += mv_i2c.o @@ -40,11 +41,11 @@ COBJS-$(CONFIG_PPC4XX_I2C) += ppc4xx_i2c.o COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o -COBJS-$(CONFIG_SPEAR_I2C) += spr_i2c.o COBJS-$(CONFIG_TEGRA_I2C) += tegra_i2c.o COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o COBJS-$(CONFIG_U8500_I2C) += u8500_i2c.o COBJS-$(CONFIG_SH_I2C) += sh_i2c.o +COBJS-$(CONFIG_SH_SH7734_I2C) += sh_sh7734_i2c.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/i2c/spr_i2c.c b/drivers/i2c/designware_i2c.c index eabfe843f7..6d118acec4 100644 --- a/drivers/i2c/spr_i2c.c +++ b/drivers/i2c/designware_i2c.c @@ -24,7 +24,7 @@ #include <common.h> #include <asm/io.h> #include <asm/arch/hardware.h> -#include <asm/arch/spr_i2c.h> +#include "designware_i2c.h" static struct i2c_regs *const i2c_regs_p = (struct i2c_regs *)CONFIG_SYS_I2C_BASE; @@ -40,6 +40,13 @@ static void set_speed(int i2c_spd) unsigned int cntl; unsigned int hcnt, lcnt; unsigned int high, low; + unsigned int enbl; + + /* to set speed cltr must be disabled */ + enbl = readl(&i2c_regs_p->ic_enable); + enbl &= ~IC_ENABLE_0B; + writel(enbl, &i2c_regs_p->ic_enable); + cntl = (readl(&i2c_regs_p->ic_con) & (~IC_CON_SPD_MSK)); @@ -71,6 +78,10 @@ static void set_speed(int i2c_spd) lcnt = (IC_CLK * low) / NANO_TO_MICRO; writel(lcnt, &i2c_regs_p->ic_fs_scl_lcnt); + + /* re-enable i2c ctrl back now that speed is set */ + enbl |= IC_ENABLE_0B; + writel(enbl, &i2c_regs_p->ic_enable); } /* @@ -113,7 +124,7 @@ int i2c_get_bus_speed(void) /* * i2c_init - Init function * @speed: required i2c speed - * @slaveadd: slave address for the spear device + * @slaveadd: slave address for the device * * Initialization function. */ diff --git a/arch/arm/include/asm/arch-spear/spr_i2c.h b/drivers/i2c/designware_i2c.h index 7521ebc6cf..03b520ed43 100644 --- a/arch/arm/include/asm/arch-spear/spr_i2c.h +++ b/drivers/i2c/designware_i2c.h @@ -21,8 +21,8 @@ * MA 02111-1307 USA */ -#ifndef __SPR_I2C_H_ -#define __SPR_I2C_H_ +#ifndef __DW_I2C_H_ +#define __DW_I2C_H_ struct i2c_regs { u32 ic_con; @@ -143,4 +143,4 @@ struct i2c_regs { #define I2C_FAST_SPEED 400000 #define I2C_STANDARD_SPEED 100000 -#endif /* __SPR_I2C_H_ */ +#endif /* __DW_I2C_H_ */ diff --git a/drivers/i2c/sh_sh7734_i2c.c b/drivers/i2c/sh_sh7734_i2c.c new file mode 100644 index 0000000000..9da173d31e --- /dev/null +++ b/drivers/i2c/sh_sh7734_i2c.c @@ -0,0 +1,387 @@ +/* + * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> + * Copyright (C) 2012 Renesas Solutions Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> + +struct sh_i2c { + u8 iccr1; + u8 iccr2; + u8 icmr; + u8 icier; + u8 icsr; + u8 sar; + u8 icdrt; + u8 icdrr; + u8 nf2cyc; + u8 __pad0; + u8 __pad1; +}; + +static struct sh_i2c *base; +static u8 iccr1_cks, nf2cyc; + +/* ICCR1 */ +#define SH_I2C_ICCR1_ICE (1 << 7) +#define SH_I2C_ICCR1_RCVD (1 << 6) +#define SH_I2C_ICCR1_MST (1 << 5) +#define SH_I2C_ICCR1_TRS (1 << 4) +#define SH_I2C_ICCR1_MTRS \ + (SH_I2C_ICCR1_MST | SH_I2C_ICCR1_TRS) + +/* ICCR1 */ +#define SH_I2C_ICCR2_BBSY (1 << 7) +#define SH_I2C_ICCR2_SCP (1 << 6) +#define SH_I2C_ICCR2_SDAO (1 << 5) +#define SH_I2C_ICCR2_SDAOP (1 << 4) +#define SH_I2C_ICCR2_SCLO (1 << 3) +#define SH_I2C_ICCR2_IICRST (1 << 1) + +#define SH_I2C_ICIER_TIE (1 << 7) +#define SH_I2C_ICIER_TEIE (1 << 6) +#define SH_I2C_ICIER_RIE (1 << 5) +#define SH_I2C_ICIER_NAKIE (1 << 4) +#define SH_I2C_ICIER_STIE (1 << 3) +#define SH_I2C_ICIER_ACKE (1 << 2) +#define SH_I2C_ICIER_ACKBR (1 << 1) +#define SH_I2C_ICIER_ACKBT (1 << 0) + +#define SH_I2C_ICSR_TDRE (1 << 7) +#define SH_I2C_ICSR_TEND (1 << 6) +#define SH_I2C_ICSR_RDRF (1 << 5) +#define SH_I2C_ICSR_NACKF (1 << 4) +#define SH_I2C_ICSR_STOP (1 << 3) +#define SH_I2C_ICSR_ALOVE (1 << 2) +#define SH_I2C_ICSR_AAS (1 << 1) +#define SH_I2C_ICSR_ADZ (1 << 0) + +#define IRQ_WAIT 1000 + +static void sh_i2c_send_stop(struct sh_i2c *base) +{ + clrbits_8(&base->iccr2, SH_I2C_ICCR2_BBSY | SH_I2C_ICCR2_SCP); +} + +static int check_icsr_bits(struct sh_i2c *base, u8 bits) +{ + int i; + + for (i = 0; i < IRQ_WAIT; i++) { + if (bits & readb(&base->icsr)) + return 0; + udelay(10); + } + + return 1; +} + +static int check_stop(struct sh_i2c *base) +{ + int ret = check_icsr_bits(base, SH_I2C_ICSR_STOP); + clrbits_8(&base->icsr, SH_I2C_ICSR_STOP); + + return ret; +} + +static int check_tend(struct sh_i2c *base, int stop) +{ + int ret = check_icsr_bits(base, SH_I2C_ICSR_TEND); + + if (stop) { + clrbits_8(&base->icsr, SH_I2C_ICSR_STOP); + sh_i2c_send_stop(base); + } + + clrbits_8(&base->icsr, SH_I2C_ICSR_TEND); + return ret; +} + +static int check_tdre(struct sh_i2c *base) +{ + return check_icsr_bits(base, SH_I2C_ICSR_TDRE); +} + +static int check_rdrf(struct sh_i2c *base) +{ + return check_icsr_bits(base, SH_I2C_ICSR_RDRF); +} + +static int check_bbsy(struct sh_i2c *base) +{ + int i; + + for (i = 0 ; i < IRQ_WAIT ; i++) { + if (!(SH_I2C_ICCR2_BBSY & readb(&base->iccr2))) + return 0; + udelay(10); + } + return 1; +} + +static int check_ackbr(struct sh_i2c *base) +{ + int i; + + for (i = 0 ; i < IRQ_WAIT ; i++) { + if (!(SH_I2C_ICIER_ACKBR & readb(&base->icier))) + return 0; + udelay(10); + } + + return 1; +} + +static void sh_i2c_reset(struct sh_i2c *base) +{ + setbits_8(&base->iccr2, SH_I2C_ICCR2_IICRST); + + udelay(100); + + clrbits_8(&base->iccr2, SH_I2C_ICCR2_IICRST); +} + +static int i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg) +{ + if (check_bbsy(base)) { + puts("i2c bus busy\n"); + goto fail; + } + + setbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS); + clrsetbits_8(&base->iccr2, SH_I2C_ICCR2_SCP, SH_I2C_ICCR2_BBSY); + + writeb((id << 1), &base->icdrt); + + if (check_tend(base, 0)) { + puts("TEND check fail...\n"); + goto fail; + } + + if (check_ackbr(base)) { + check_tend(base, 0); + sh_i2c_send_stop(base); + goto fail; + } + + writeb(reg, &base->icdrt); + + if (check_tdre(base)) { + puts("TDRE check fail...\n"); + goto fail; + } + + if (check_tend(base, 0)) { + puts("TEND check fail...\n"); + goto fail; + } + + return 0; +fail: + + return 1; +} + +static int +i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 *val, int size) +{ + int i; + + if (i2c_set_addr(base, id, reg)) { + puts("Fail set slave address\n"); + return 1; + } + + for (i = 0; i < size; i++) { + writeb(val[i], &base->icdrt); + check_tdre(base); + } + + check_tend(base, 1); + check_stop(base); + + udelay(100); + + clrbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS); + clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE); + sh_i2c_reset(base); + + return 0; +} + +static u8 i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg) +{ + u8 ret = 0; + + if (i2c_set_addr(base, id, reg)) { + puts("Fail set slave address\n"); + goto fail; + } + + clrsetbits_8(&base->iccr2, SH_I2C_ICCR2_SCP, SH_I2C_ICCR2_BBSY); + writeb((id << 1) | 1, &base->icdrt); + + if (check_tend(base, 0)) + puts("TDRE check fail...\n"); + + clrsetbits_8(&base->iccr1, SH_I2C_ICCR1_TRS, SH_I2C_ICCR1_MST); + clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE); + setbits_8(&base->icier, SH_I2C_ICIER_ACKBT); + setbits_8(&base->iccr1, SH_I2C_ICCR1_RCVD); + + /* read data (dummy) */ + ret = readb(&base->icdrr); + + if (check_rdrf(base)) { + puts("check RDRF error\n"); + goto fail; + } + + clrbits_8(&base->icsr, SH_I2C_ICSR_STOP); + udelay(1000); + + sh_i2c_send_stop(base); + + if (check_stop(base)) { + puts("check STOP error\n"); + goto fail; + } + + clrbits_8(&base->iccr1, SH_I2C_ICCR1_MTRS); + clrbits_8(&base->icsr, SH_I2C_ICSR_TDRE); + + /* data read */ + ret = readb(&base->icdrr); + +fail: + clrbits_8(&base->iccr1, SH_I2C_ICCR1_RCVD); + + return ret; +} + +#ifdef CONFIG_I2C_MULTI_BUS +static unsigned int current_bus; + +/** + * i2c_set_bus_num - change active I2C bus + * @bus: bus index, zero based + * @returns: 0 on success, non-0 on failure + */ +int i2c_set_bus_num(unsigned int bus) +{ + switch (bus) { + case 0: + base = (void *)CONFIG_SH_I2C_BASE0; + break; + case 1: + base = (void *)CONFIG_SH_I2C_BASE1; + break; + default: + printf("Bad bus: %d\n", bus); + return -1; + } + + current_bus = bus; + + return 0; +} + +/** + * i2c_get_bus_num - returns index of active I2C bus + */ +unsigned int i2c_get_bus_num(void) +{ + return current_bus; +} +#endif + +void i2c_init(int speed, int slaveaddr) +{ +#ifdef CONFIG_I2C_MULTI_BUS + current_bus = 0; +#endif + base = (struct sh_i2c *)CONFIG_SH_I2C_BASE0; + + if (speed == 400000) + iccr1_cks = 0x07; + else + iccr1_cks = 0x0F; + + nf2cyc = 1; + + /* Reset */ + sh_i2c_reset(base); + + /* ICE enable and set clock */ + writeb(SH_I2C_ICCR1_ICE | iccr1_cks, &base->iccr1); + writeb(nf2cyc, &base->nf2cyc); +} + +/* + * i2c_read: - Read multiple bytes from an i2c device + * + * The higher level routines take into account that this function is only + * called with len < page length of the device (see configuration file) + * + * @chip: address of the chip which is to be read + * @addr: i2c data address within the chip + * @alen: length of the i2c data address (1..2 bytes) + * @buffer: where to write the data + * @len: how much byte do we want to read + * @return: 0 in case of success + */ +int i2c_read(u8 chip, u32 addr, int alen, u8 *buffer, int len) +{ + int i = 0; + for (i = 0; i < len; i++) + buffer[i] = i2c_raw_read(base, chip, addr + i); + + return 0; +} + +/* + * i2c_write: - Write multiple bytes to an i2c device + * + * The higher level routines take into account that this function is only + * called with len < page length of the device (see configuration file) + * + * @chip: address of the chip which is to be written + * @addr: i2c data address within the chip + * @alen: length of the i2c data address (1..2 bytes) + * @buffer: where to find the data to be written + * @len: how much byte do we want to read + * @return: 0 in case of success + */ +int i2c_write(u8 chip, u32 addr, int alen, u8 *buffer, int len) +{ + return i2c_raw_write(base, chip, addr, buffer, len); +} + +/* + * i2c_probe: - Test if a chip answers for a given i2c address + * + * @chip: address of the chip which is searched for + * @return: 0 if a chip was found, -1 otherwhise + */ +int i2c_probe(u8 chip) +{ + u8 byte; + return i2c_read(chip, 0, 0, &byte, 1); +} diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c index 08fc5c1d3e..8d59d46c64 100644 --- a/drivers/mmc/bfin_sdh.c +++ b/drivers/mmc/bfin_sdh.c @@ -256,7 +256,6 @@ int bfin_mmc_init(bd_t *bis) mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; mmc->f_max = get_sclk(); mmc->f_min = mmc->f_max >> 9; - mmc->block_dev.part_type = PART_TYPE_DOS; mmc->b_max = 0; diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c index 0b8c33fb7a..49c74c278a 100644 --- a/drivers/net/fm/fm.c +++ b/drivers/net/fm/fm.c @@ -408,6 +408,8 @@ int fm_init_common(int index, struct ccsr_fman *reg) /* flush cache after read */ flush_cache((ulong)addr, cnt * 512); } +#elif defined(CONFIG_SYS_QE_FMAN_FW_IN_REMOTE) + void *addr = (void *)CONFIG_SYS_QE_FMAN_FW_ADDR; #endif /* Upload the Fman microcode if it's present */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index f2d33668d8..08fc4e8427 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -181,7 +181,7 @@ /* DDR Setup */ #define CONFIG_FSL_DDR3 -#define CONFIG_DDR_RAW_TIMING +#define CONFIG_SYS_DDR_RAW_TIMING #define CONFIG_DDR_SPD #define CONFIG_SYS_SPD_BUS_NUM 1 #define SPD_EEPROM_ADDRESS 0x52 diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index da98f8f027..fe39d4e6e6 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -96,6 +96,11 @@ #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_OFFSET (512 * 1097) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \ @@ -186,10 +191,11 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE #endif -#define CONFIG_SYS_BR0_PRELIM \ +#define CONFIG_SYS_FLASH_BR_PRELIM \ (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) -#define CONFIG_SYS_OR0_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ - | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) +#define CONFIG_SYS_FLASH_OR_PRELIM \ + ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ + | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) #define CONFIG_FSL_CPLD #define CPLD_BASE 0xffdf0000 /* CPLD registers */ @@ -221,6 +227,53 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_RAMBOOT #endif +#define CONFIG_NAND_FSL_ELBC +/* Nand Flash */ +#ifdef CONFIG_NAND_FSL_ELBC +#define CONFIG_SYS_NAND_BASE 0xffa00000 +#ifdef CONFIG_PHYS_64BIT +#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull +#else +#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE +#endif + +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +/* NAND flash config */ +#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V) /* valid */ +#define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ + | OR_FCM_PGS /* Large Page*/ \ + | OR_FCM_CSCT \ + | OR_FCM_CST \ + | OR_FCM_CHT \ + | OR_FCM_SCY_1 \ + | OR_FCM_TRLX \ + | OR_FCM_EHTR) + +#ifdef CONFIG_NAND +#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ +#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ +#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ +#else +#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ +#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ +#endif +#else +#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ +#endif /* CONFIG_NAND_FSL_ELBC */ + #define CONFIG_SYS_FLASH_EMPTY_INFO #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} diff --git a/include/configs/adp-ag102.h b/include/configs/adp-ag102.h new file mode 100644 index 0000000000..a4628e4343 --- /dev/null +++ b/include/configs/adp-ag102.h @@ -0,0 +1,375 @@ +/* + * Copyright (C) 2011 Andes Technology Corporation + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/ag102.h> + +/* + * CPU and Board Configuration Options + */ +#define CONFIG_ADP_AG102 + +#define CONFIG_USE_INTERRUPT + +#define CONFIG_SKIP_LOWLEVEL_INIT + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_MEM_REMAP +#endif + +#ifdef CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SYS_TEXT_BASE 0x04200000 +#else +#define CONFIG_SYS_TEXT_BASE 0x00000000 +#endif + +/* + * Timer + */ + +/* + * According to the discussion in u-boot mailing list before, + * CONFIG_SYS_HZ at 1000 is mandatory. + */ +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_CLK_FREQ (66000000 * 2) +#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ + +/* + * Use Externel CLOCK or PCLK + */ +#undef CONFIG_FTRTC010_EXTCLK + +#ifndef CONFIG_FTRTC010_EXTCLK +#define CONFIG_FTRTC010_PCLK +#endif + +#ifdef CONFIG_FTRTC010_EXTCLK +#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */ +#else +#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */ +#endif + +#define TIMER_LOAD_VAL 0xffffffff + +/* + * Real Time Clock + */ +#define CONFIG_RTC_FTRTC010 + +/* + * Real Time Clock Divider + * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) + */ +#define OSC_5MHZ (5*1000000) +#define OSC_CLK (2*OSC_5MHZ) +#define RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) + +/* + * Serial console configuration + */ + +/* FTUART is a high speed NS 16C550A compatible UART */ +#define CONFIG_BAUDRATE 38400 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_01_BASE +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_CLK 33000000 /* AG102 */ + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * Ethernet + */ +#define CONFIG_NET_MULTI +#define CONFIG_PHY_MAX_ADDR 32 /* this comes from <linux/phy.h> */ +#define CONFIG_SYS_DISCOVER_PHY +#define CONFIG_FTGMAC100 +#define CONFIG_FTGMAC100_EGIGA + +#define CONFIG_BOOTDELAY 3 + +/* + * SD (MMC) controller + */ +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_FTSDC010 +#define CONFIG_FTSDC010_NUMBER 1 +#define CONFIG_FTSDC010_SDIO +#define CONFIG_CMD_FAT +#define CONFIG_CMD_EXT2 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_PING +#define CONFIG_CMD_IDE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_ELF + +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS + +/* + * PCI + */ +#define CONFIG_PCI +#define CONFIG_FTPCI100 +#define CONFIG_FTPCI100_MEM_BASE 0xa0000000 +#define CONFIG_FTPCI100_IO_SIZE FTPCI100_BASE_IO_SIZE(256) /* 256M */ +#define CONFIG_FTPCI100_MEM_SIZE FTPCI100_MEM_SIZE(128) /* 128M */ +#define CONFIG_FTPCI100_MEM_BASE_SIZE1 0x50 + +#define CONFIG_PCI_MEM_BUS 0xa0000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x01000000 /* 256M */ + +#define CONFIG_PCI_IO_BUS 0x90000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x00100000 /* 1M */ + +/* + * USB + */ +#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) +#if defined(CONFIG_FTPCI100) +#define __io /* enable outl & inl */ +#define CONFIG_CMD_USB +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 5 +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_PCI_EHCI_DEVICE 0 +#define CONFIG_USB_EHCI_PCI +#define CONFIG_PREBOOT "usb start;" +#endif /* #if defiend(CONFIG_FTPCI100) */ +#endif /* #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) */ + +/* + * IDE/ATA stuff + */ +#define __io +#define CONFIG_IDE_AHB +#define CONFIG_IDE_FTIDE020 + +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#define CONFIG_IDE_RESET 1 /* reset for ide supported */ +#define CONFIG_IDE_PREINIT 1 /* preinit for ide */ + +/* max: 2 IDE busses */ +#define CONFIG_SYS_IDE_MAXBUS 1 /* origin: 2 */ +/* max: 2 drives per IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 1 /* origin: (MAXBUS * 2) */ + +#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_FTIDE020S_BASE +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0000 + +#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* for data I/O */ +#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* for normal regs access */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* for alternate regs */ + +#define CONFIG_MAC_PARTITION +#define CONFIG_DOS_PARTITION +#define CONFIG_SUPPORT_VFAT + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "NDS32 # " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) + +/* + * size in bytes reserved for initial data +*/ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * AHB Controller configuration + */ +#define CONFIG_FTAHBC020S + +#ifdef CONFIG_FTAHBC020S +#include <faraday/ftahbc020s.h> + +/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */ +#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100 + +/* + * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S, + * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote + * in C language. + */ +#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \ + (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \ + FTAHBC020S_SLAVE_BSR_SIZE(0xb)) +#endif + +/* + * Watchdog + */ +#define CONFIG_FTWDT010_WATCHDOG + +/* + * PCU Power Control Unit configuration + */ +#define CONFIG_ANDES_PCU + +#ifdef CONFIG_ANDES_PCU +#include <andestech/andes_pcu.h> + +#endif + +/* + * DDR DRAM controller configuration + */ +#define CONFIG_DWCDDR21MCTL + +#ifdef CONFIG_DWCDDR21MCTL +#include <synopsys/dwcddr21mctl.h> +/* DCR: + * 2GB: 0x000025d2, 2GB (1Gb x8 2 ranks) Micron/innoDisk/Transcend + * 1GB: 0x000021d2, 1GB (1Gb x8 1 rank) Micron/Transcend/innoDisk + * 512MB: 0x000025cc, Micron 512MB (512Mb x16 2 ranks) + * 512MB: 0x000021ca, Trenscend/innoDisk 512MB (512Mb x8 1 rank) + * 256MB: 0x000020d4, Micron 256MB (1Gb x16 1 ranks) + */ +#define CONFIG_SYS_DWCDDR21MCTL_CCR 0x00020004 +#define CONFIG_SYS_DWCDDR21MCTL_CCR2 (DWCDDR21MCTL_CCR_DTT(0x1) | \ + DWCDDR21MCTL_CCR_DFTLM(0x4) | \ + DWCDDR21MCTL_CCR_HOSTEN(0x1)) + +/* 0x04: 0x000020d4 */ +#define CONFIG_SYS_DWCDDR21MCTL_DCR 0x000020ca + +/* 0x08: 0x0000000f */ +#define CONFIG_SYS_DWCDDR21MCTL_IOCR 0x0000000f + +/* 0x10: 0x00034812 */ +#define CONFIG_SYS_DWCDDR21MCTL_DRR (DWCDDR21MCTL_DRR_TRFC(0x12) | \ + DWCDDR21MCTL_DRR_TRFPRD(0x0348)) +/* 0x24 */ +#define CONFIG_SYS_DWCDDR21MCTL_DLLCR0 DWCDDR21MCTL_DLLCR_PHASE(0x0) + +/* 0x4c: 0x00000040 */ +#define CONFIG_SYS_DWCDDR21MCTL_RSLR0 0x00000040 + +/* 0x5c: 0x000055CF */ +#define CONFIG_SYS_DWCDDR21MCTL_RDGR0 0x000055cf + +/* 0xa4: 0x00100000 */ +#define CONFIG_SYS_DWCDDR21MCTL_DTAR (DWCDDR21MCTL_DTAR_DTBANK(0x0) | \ + DWCDDR21MCTL_DTAR_DTROW(0x0100) | \ + DWCDDR21MCTL_DTAR_DTCOL(0x0)) +/* 0x1f0: 0x00000852 */ +#define CONFIG_SYS_DWCDDR21MCTL_MR (DWCDDR21MCTL_MR_WR(0x4) | \ + DWCDDR21MCTL_MR_CL(0x5) | \ + DWCDDR21MCTL_MR_BL(0x2)) +#endif + +/* + * Physical Memory Map + */ +#if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT) +#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ +#if defined(CONFIG_MEM_REMAP) +#define PHYS_SDRAM_0_AT_INIT 0x80000000 /* SDRAM Bank #1 before remap*/ +#endif +#else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */ +#define PHYS_SDRAM_0 0x80000000 /* SDRAM Bank #1 */ +#endif + +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_0_SIZE 0x10000000 /* 256 MB */ + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 + +#ifdef CONFIG_MEM_REMAP +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \ + GENERATED_GBL_DATA_SIZE) +#else +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ + GENERATED_GBL_DATA_SIZE) +#endif /* CONFIG_MEM_REMAP */ + +/* + * Load address and memory test area should agree with + * board/faraday/a320/config.mk + * Be careful not to overwrite U-boot itself. + */ +#define CONFIG_SYS_LOAD_ADDR 0x0CF00000 + +/* memtest works on 63 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000) + +/* + * Static memory controller configuration + */ + +/* + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH + +/* + * Env Storage Settings + */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 4096 + +#endif /* __CONFIG_H */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 77dd0a2d1e..8ed37a58c2 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -33,6 +33,15 @@ #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc #endif +#ifdef CONFIG_SRIOBOOT_SLAVE +/* Set 1M boot space */ +#define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) +#define CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIOBOOT_SLAVE_ADDR) +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_SYS_NO_FLASH +#endif + /* High Level Configuration Options */ #define CONFIG_BOOKE #define CONFIG_E500 /* BOOKE e500 family */ @@ -68,7 +77,9 @@ #define CONFIG_ENV_OVERWRITE #ifdef CONFIG_SYS_NO_FLASH +#ifndef CONFIG_SRIOBOOT_SLAVE #define CONFIG_ENV_IS_NOWHERE +#endif #else #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI @@ -97,6 +108,12 @@ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE #define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIOBOOT_SLAVE) +#define CONFIG_ENV_IS_IN_REMOTE +#define CONFIG_ENV_ADDR 0xffe20000 +#define CONFIG_ENV_SIZE 0x2000 +#elif defined(CONFIG_ENV_IS_NOWHERE) +#define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) @@ -373,6 +390,54 @@ #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ /* + * SRIOBOOT - MASTER + */ +#ifdef CONFIG_SRIOBOOT_MASTER +/* master port for srioboot*/ +#define CONFIG_SRIOBOOT_MASTER_PORT 0 +/* #define CONFIG_SRIOBOOT_MASTER_PORT 1 */ +/* + * for slave u-boot IMAGE instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1 0xfef080000ull +#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1 0xfff80000ull +#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE 0x80000 /* 512K */ +#define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2 0xfef080000ull +#define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2 0x3fff80000ull +/* + * for slave UCODE instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIOBOOT_SLAVE_UCODE_LAW_PHYS 0xfef020000ull +#define CONFIG_SRIOBOOT_SLAVE_UCODE_SRIO_PHYS 0x3ffe00000ull +#define CONFIG_SRIOBOOT_SLAVE_UCODE_SIZE 0x10000 /* 64K */ +/* + * for slave ENV instored in master memory space, + * PHYS must be aligned based on the SIZE + */ +#define CONFIG_SRIOBOOT_SLAVE_ENV_LAW_PHYS 0xfef060000ull +#define CONFIG_SRIOBOOT_SLAVE_ENV_SRIO_PHYS 0x3ffe20000ull +#define CONFIG_SRIOBOOT_SLAVE_ENV_SIZE 0x20000 /* 128K */ +/* slave core release by master*/ +#define CONFIG_SRIOBOOT_SLAVE_HOLDOFF +#define CONFIG_SRIOBOOT_SLAVE_BRR_OFFSET 0xe00e4 +#define CONFIG_SRIOBOOT_SLAVE_RELEASE_MASK 0x00000001 /* release core 0 */ +#endif + +/* + * SRIOBOOT - SLAVE + */ +#ifdef CONFIG_SRIOBOOT_SLAVE +/* slave port for srioboot */ +#define CONFIG_SRIOBOOT_SLAVE_PORT0 +/* #define CONFIG_SRIOBOOT_SLAVE_PORT1 */ +#define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR 0xFFE00000 +#define CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS \ + (0x300000000ull | CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR) +#endif + +/* * eSPI - Enhanced SPI */ #define CONFIG_FSL_ESPI @@ -492,6 +557,16 @@ #elif defined(CONFIG_NAND) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND #define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_SRIOBOOT_SLAVE) +/* + * Slave has no ucode locally, it can fetch this from remote. When implementing + * in two corenet boards, slave's ucode could be stored in master's memory + * space, the address can be mapped from slave TLB->slave LAW-> + * slave SRIO outbound window->master inbound window->master LAW-> + * the ucode address in master's NOR flash. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xFFE00000 #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEF000000 diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index 146819712d..2cd20279be 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -34,10 +34,12 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME dlvsion-10g -#define CONFIG_IDENT_STRING " dlvision-10g 0.02" +#define CONFIG_IDENT_STRING " dlvision-10g 0.03" #include "amcc-common.h" -#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R #define CONFIG_LAST_STAGE_INIT #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ @@ -80,6 +82,7 @@ * Commands additional to the ones defined in amcc-common.h */ #define CONFIG_CMD_CACHE +#define CONFIG_CMD_DTT #undef CONFIG_CMD_EEPROM /* @@ -115,7 +118,7 @@ /* Temp sensor/hwmon/dtt */ #define CONFIG_DTT_LM63 1 /* National LM63 */ -#define CONFIG_DTT_SENSORS { 0x4c, 0x4e } /* Sensor addresses */ +#define CONFIG_DTT_SENSORS { 0x4c, 0x4e, 0x18 } /* Sensor addresses */ #define CONFIG_DTT_PWM_LOOKUPTABLE \ { { 46, 10 }, { 48, 14 }, { 50, 19 }, { 52, 23 },\ { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } } diff --git a/include/configs/gdppc440etx.h b/include/configs/gdppc440etx.h index 3c59ff4922..9efbb8e34c 100644 --- a/include/configs/gdppc440etx.h +++ b/include/configs/gdppc440etx.h @@ -50,6 +50,10 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f*/ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ +#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */ +#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ +#define CONFIG_AUTOBOOT_STOP_STR " " + /* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) diff --git a/include/configs/intip.h b/include/configs/intip.h index 92b65af7c9..33364a843e 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -37,10 +37,10 @@ #define CONFIG_460EX 1 /* Specific PPC460EX */ #ifdef CONFIG_DEVCONCENTER #define CONFIG_HOSTNAME devconcenter -#define CONFIG_IDENT_STRING " devconcenter 0.05" +#define CONFIG_IDENT_STRING " devconcenter 0.06" #else #define CONFIG_HOSTNAME intip -#define CONFIG_IDENT_STRING " intip 0.05" +#define CONFIG_IDENT_STRING " intip 0.06" #endif #define CONFIG_440 1 #define CONFIG_4xx 1 /* ... PPC4xx family */ diff --git a/include/configs/io.h b/include/configs/io.h index 9d2a87d22d..03661cce2d 100644 --- a/include/configs/io.h +++ b/include/configs/io.h @@ -34,11 +34,13 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME io -#define CONFIG_IDENT_STRING " io 0.04" +#define CONFIG_IDENT_STRING " io 0.05" #include "amcc-common.h" -#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */ -#define CONFIG_LAST_STAGE_INIT /* call last_stage_init */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R +#define CONFIG_LAST_STAGE_INIT #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ @@ -48,6 +50,10 @@ #define PLLMR0_DEFAULT PLLMR0_266_133_66 #define PLLMR1_DEFAULT PLLMR1_266_133_66 +#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */ +#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ +#define CONFIG_AUTOBOOT_STOP_STR " " + /* new uImage format support */ #define CONFIG_FIT #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ @@ -76,6 +82,7 @@ * Commands additional to the ones defined in amcc-common.h */ #define CONFIG_CMD_CACHE +#define CONFIG_CMD_DTT #undef CONFIG_CMD_EEPROM /* diff --git a/include/configs/io64.h b/include/configs/io64.h index 51b2dd1c13..887aaefd39 100644 --- a/include/configs/io64.h +++ b/include/configs/io64.h @@ -53,7 +53,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME io64 -#define CONFIG_IDENT_STRING " io64 0.01" +#define CONFIG_IDENT_STRING " io64 0.02" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F diff --git a/include/configs/iocon.h b/include/configs/iocon.h index 9fcc6430cd..7f8825bed1 100644 --- a/include/configs/iocon.h +++ b/include/configs/iocon.h @@ -34,10 +34,11 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME iocon -#define CONFIG_IDENT_STRING " iocon 0.03" +#define CONFIG_IDENT_STRING " iocon 0.04" #include "amcc-common.h" -#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_LAST_STAGE_INIT #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ @@ -48,6 +49,10 @@ #define PLLMR0_DEFAULT PLLMR0_266_133_66 #define PLLMR1_DEFAULT PLLMR1_266_133_66 +#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */ +#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ +#define CONFIG_AUTOBOOT_STOP_STR " " + /* new uImage format support */ #define CONFIG_FIT #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ diff --git a/include/configs/neo.h b/include/configs/neo.h index 8de5aaf1ed..38b5becc2e 100644 --- a/include/configs/neo.h +++ b/include/configs/neo.h @@ -35,9 +35,13 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME neo +#define CONFIG_IDENT_STRING " neo 0.01" #include "amcc-common.h" -#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R +#define CONFIG_LAST_STAGE_INIT #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ @@ -149,53 +153,53 @@ #ifdef CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_ADDR 0xFFF00000 +#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR_REDUND 0xFFF20000 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) #endif /* * PPC405 GPIO Configuration */ -#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 */ \ -{ \ -/* GPIO Core 0 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \ -{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO5 TS3 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \ -{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \ -{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \ -{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \ -{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \ -{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \ -} \ +#define CONFIG_SYS_4xx_GPIO_TABLE { \ +{ \ +/* GPIO Core 0 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \ +{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \ +{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \ +{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \ +} \ } /* @@ -226,12 +230,22 @@ #define CONFIG_SYS_EBC_PB1CR 0xFB85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit */ /* Memory Bank 2 (FPGA) initialization */ -#define CONFIG_FPGA_BASE 0x7f100000 +#define CONFIG_SYS_FPGA0_BASE 0x7f100000 #define CONFIG_SYS_EBC_PB2AP 0x92015480 #define CONFIG_SYS_EBC_PB2CR 0x7f11a000 /* BAS=0x7f1,BS=1MB,BU=R/W,BW=16bit */ +#define CONFIG_SYS_FPGA_BASE(k) CONFIG_SYS_FPGA0_BASE + +#define CONFIG_SYS_FPGA_COUNT 1 + /* Memory Bank 3 (Latches) initialization */ +#define CONFIG_SYS_LATCH_BASE 0x7f200000 #define CONFIG_SYS_EBC_PB3AP 0x92015480 #define CONFIG_SYS_EBC_PB3CR 0x7f21a000 /* BAS=0x7f2,BS=1MB,BU=R/W,BW=16bit */ +#define CONFIG_SYS_LATCH0_RESET 0xffff +#define CONFIG_SYS_LATCH0_BOOT 0xffff +#define CONFIG_SYS_LATCH1_RESET 0xffbf +#define CONFIG_SYS_LATCH1_BOOT 0xffff + #endif /* __CONFIG_H */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 3098c5acfe..9f2951d687 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -184,7 +184,7 @@ #define CONFIG_ENV_OVERWRITE #define CONFIG_CMD_SATA -#define CONFIG_SATA_SIL3114 +#define CONFIG_SATA_SIL #define CONFIG_SYS_SATA_MAX_DEVICE 2 #define CONFIG_LIBATA #define CONFIG_LBA48 @@ -227,7 +227,7 @@ /* DDR Setup */ #define CONFIG_FSL_DDR3 -#define CONFIG_DDR_RAW_TIMING +#define CONFIG_SYS_DDR_RAW_TIMING #define CONFIG_DDR_SPD #define CONFIG_SYS_SPD_BUS_NUM 1 #define SPD_EEPROM_ADDRESS 0x52 diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index 5fef8cce80..a79181565e 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -41,7 +41,7 @@ /* I2C driver configuration */ #define CONFIG_HARD_I2C -#define CONFIG_SPEAR_I2C +#define CONFIG_DW_I2C #define CONFIG_SYS_I2C_SPEED 400000 #define CONFIG_SYS_I2C_SLAVE 0x02 diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h index 949864c0f2..1758d7445e 100644 --- a/include/gdsys_fpga.h +++ b/include/gdsys_fpga.h @@ -35,20 +35,20 @@ enum { int get_fpga_state(unsigned dev); void print_fpga_state(unsigned dev); -typedef struct ihs_gpio { +struct ihs_gpio { u16 read; u16 clear; u16 set; -} ihs_gpio_t; +}; -typedef struct ihs_i2c { +struct ihs_i2c { u16 write_mailbox; u16 write_mailbox_ext; u16 read_mailbox; u16 read_mailbox_ext; -} ihs_i2c_t; +}; -typedef struct ihs_osd { +struct ihs_osd { u16 version; u16 features; u16 control; @@ -56,10 +56,21 @@ typedef struct ihs_osd { u16 xy_scale; u16 x_pos; u16 y_pos; -} ihs_osd_t; +}; + +#ifdef CONFIG_NEO +struct ihs_fpga { + u16 reflection_low; /* 0x0000 */ + u16 versions; /* 0x0002 */ + u16 fpga_features; /* 0x0004 */ + u16 fpga_version; /* 0x0006 */ + u16 reserved_0[8187]; /* 0x0008 */ + u16 reflection_high; /* 0x3ffe */ +}; +#endif #ifdef CONFIG_IO -typedef struct ihs_fpga { +struct ihs_fpga { u16 reflection_low; /* 0x0000 */ u16 versions; /* 0x0002 */ u16 fpga_features; /* 0x0004 */ @@ -68,11 +79,11 @@ typedef struct ihs_fpga { u16 quad_serdes_reset; /* 0x0012 */ u16 reserved_1[8181]; /* 0x0014 */ u16 reflection_high; /* 0x3ffe */ -} ihs_fpga_t; +}; #endif #ifdef CONFIG_IO64 -typedef struct ihs_fpga { +struct ihs_fpga { u16 reflection_low; /* 0x0000 */ u16 versions; /* 0x0002 */ u16 fpga_features; /* 0x0004 */ @@ -87,30 +98,30 @@ typedef struct ihs_fpga { u16 ch0_hicb_config_int;/* 0x0502 */ u16 reserved_3[7549]; /* 0x0504 */ u16 reflection_high; /* 0x3ffe */ -} ihs_fpga_t; +}; #endif #ifdef CONFIG_IOCON -typedef struct ihs_fpga { +struct ihs_fpga { u16 reflection_low; /* 0x0000 */ u16 versions; /* 0x0002 */ u16 fpga_version; /* 0x0004 */ u16 fpga_features; /* 0x0006 */ u16 reserved_0[6]; /* 0x0008 */ - ihs_gpio_t gpio; /* 0x0014 */ + struct ihs_gpio gpio; /* 0x0014 */ u16 mpc3w_control; /* 0x001a */ u16 reserved_1[19]; /* 0x001c */ u16 videocontrol; /* 0x0042 */ u16 reserved_2[93]; /* 0x0044 */ u16 reflection_high; /* 0x00fe */ - ihs_osd_t osd; /* 0x0100 */ - u16 reserved_3[88]; /* 0x010e */ + struct ihs_osd osd; /* 0x0100 */ + u16 reserved_3[889]; /* 0x010e */ u16 videomem; /* 0x0800 */ -} ihs_fpga_t; +}; #endif #ifdef CONFIG_DLVISION_10G -typedef struct ihs_fpga { +struct ihs_fpga { u16 reflection_low; /* 0x0000 */ u16 versions; /* 0x0002 */ u16 fpga_version; /* 0x0004 */ @@ -118,16 +129,16 @@ typedef struct ihs_fpga { u16 reserved_0[10]; /* 0x0008 */ u16 extended_interrupt; /* 0x001c */ u16 reserved_1[9]; /* 0x001e */ - ihs_i2c_t i2c; /* 0x0030 */ + struct ihs_i2c i2c; /* 0x0030 */ u16 reserved_2[16]; /* 0x0038 */ u16 mpc3w_control; /* 0x0058 */ u16 reserved_3[34]; /* 0x005a */ u16 videocontrol; /* 0x009e */ u16 reserved_4[176]; /* 0x00a0 */ - ihs_osd_t osd; /* 0x0200 */ + struct ihs_osd osd; /* 0x0200 */ u16 reserved_5[761]; /* 0x020e */ u16 videomem; /* 0x0800 */ -} ihs_fpga_t; +}; #endif #endif diff --git a/include/image.h b/include/image.h index a1c6e4e9ad..aa9daa2deb 100644 --- a/include/image.h +++ b/include/image.h @@ -531,9 +531,9 @@ static inline int image_check_target_arch(const image_header_t *hdr) #define FIT_MAX_HASH_LEN 20 /* max(crc32_len(4), sha1_len(20)) */ /* cmdline argument format parsing */ -inline int fit_parse_conf(const char *spec, ulong addr_curr, +int fit_parse_conf(const char *spec, ulong addr_curr, ulong *addr, const char **conf_name); -inline int fit_parse_subimage(const char *spec, ulong addr_curr, +int fit_parse_subimage(const char *spec, ulong addr_curr, ulong *addr, const char **image_name); void fit_print_contents(const void *fit); |
