diff options
| -rw-r--r-- | arch/arm/cpu/armv7/ls102xa/fdt.c | 17 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc8xxx/fdt.c | 170 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/config.h | 1 | ||||
| -rw-r--r-- | drivers/crypto/fsl/Makefile | 1 | ||||
| -rw-r--r-- | drivers/crypto/fsl/sec.c | 184 |
5 files changed, 203 insertions, 170 deletions
diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c index 989780d273..0fda694bdd 100644 --- a/arch/arm/cpu/armv7/ls102xa/fdt.c +++ b/arch/arm/cpu/armv7/ls102xa/fdt.c @@ -15,6 +15,8 @@ #include <fsl_esdhc.h> #endif #include <tsec.h> +#include <asm/arch/immap_ls102xa.h> +#include <fsl_sec.h> DECLARE_GLOBAL_DATA_PTR; @@ -77,9 +79,24 @@ void ft_cpu_setup(void *blob, bd_t *bd) int off; int val; const char *sysclk_path; + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + unsigned int svr; + svr = in_be32(&gur->svr); unsigned long busclk = get_bus_freq(0); + /* delete crypto node if not on an E-processor */ + if (!IS_E_PROCESSOR(svr)) + fdt_fixup_crypto_node(blob, 0); +#if CONFIG_SYS_FSL_SEC_COMPAT >= 4 + else { + ccsr_sec_t __iomem *sec; + + sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; + fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms)); + } +#endif + fdt_fixup_ethernet(blob); off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 1c63f93f4d..9cc1676b60 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -73,176 +73,6 @@ void ft_fixup_num_cores(void *blob) { } #endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */ -/* - * update crypto node properties to a specified revision of the SEC - * called with sec_rev == 0 if not on an E processor - */ -#if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */ -void fdt_fixup_crypto_node(void *blob, int sec_rev) -{ - static const struct sec_rev_prop { - u32 sec_rev; - u32 num_channels; - u32 channel_fifo_len; - u32 exec_units_mask; - u32 descriptor_types_mask; - } sec_rev_prop_list [] = { - { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ - { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ - { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ - { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ - { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ - { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */ - { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */ - }; - static char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * - sizeof("fsl,secX.Y")]; - int crypto_node, sec_idx, err; - char *p; - u32 val; - - /* locate crypto node based on lowest common compatible */ - crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); - if (crypto_node == -FDT_ERR_NOTFOUND) - return; - - /* delete it if not on an E-processor */ - if (crypto_node > 0 && !sec_rev) { - fdt_del_node(blob, crypto_node); - return; - } - - /* else we got called for possible uprev */ - for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++) - if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev) - break; - - if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) { - puts("warning: unknown SEC revision number\n"); - return; - } - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels); - err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask); - err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask); - err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len); - err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = 0; - while (sec_idx >= 0) { - p = compat_strlist + val; - val += sprintf(p, "fsl,sec%d.%d", - (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8, - sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1; - sec_idx--; - } - err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); -} -#elif CONFIG_SYS_FSL_SEC_COMPAT >= 4 /* SEC4 */ -static u8 caam_get_era(void) -{ - static const struct { - u16 ip_id; - u8 maj_rev; - u8 era; - } caam_eras[] = { - {0x0A10, 1, 1}, - {0x0A10, 2, 2}, - {0x0A12, 1, 3}, - {0x0A14, 1, 3}, - {0x0A14, 2, 4}, - {0x0A16, 1, 4}, - {0x0A10, 3, 4}, - {0x0A11, 1, 4}, - {0x0A18, 1, 4}, - {0x0A11, 2, 5}, - {0x0A12, 2, 5}, - {0x0A13, 1, 5}, - {0x0A1C, 1, 5} - }; - - ccsr_sec_t __iomem *sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; - u32 secvid_ms = sec_in32(&sec->secvid_ms); - u32 ccbvid = sec_in32(&sec->ccbvid); - u16 ip_id = (secvid_ms & SEC_SECVID_MS_IPID_MASK) >> - SEC_SECVID_MS_IPID_SHIFT; - u8 maj_rev = (secvid_ms & SEC_SECVID_MS_MAJ_REV_MASK) >> - SEC_SECVID_MS_MAJ_REV_SHIFT; - u8 era = (ccbvid & SEC_CCBVID_ERA_MASK) >> SEC_CCBVID_ERA_SHIFT; - - int i; - - if (era) /* This is '0' prior to CAAM ERA-6 */ - return era; - - for (i = 0; i < ARRAY_SIZE(caam_eras); i++) - if (caam_eras[i].ip_id == ip_id && - caam_eras[i].maj_rev == maj_rev) - return caam_eras[i].era; - - return 0; -} - -static void fdt_fixup_crypto_era(void *blob, u32 era) -{ - int err; - int crypto_node; - - crypto_node = fdt_path_offset(blob, "crypto"); - if (crypto_node < 0) { - printf("WARNING: Missing crypto node\n"); - return; - } - - err = fdt_setprop(blob, crypto_node, "fsl,sec-era", &era, - sizeof(era)); - if (err < 0) { - printf("ERROR: could not set fsl,sec-era property: %s\n", - fdt_strerror(err)); - } -} - -void fdt_fixup_crypto_node(void *blob, int sec_rev) -{ - u8 era; - - if (!sec_rev) { - fdt_del_node_and_alias(blob, "crypto"); - return; - } - - /* Add SEC ERA information in compatible */ - era = caam_get_era(); - if (era) { - fdt_fixup_crypto_era(blob, era); - } else { - printf("WARNING: Unable to get ERA for CAAM rev: %d\n", - sec_rev); - } -} -#endif - int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc) { return fdt_setprop_string(blob, offset, "phy-connection-type", diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index 423a6fb8dc..65496d0d90 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -75,6 +75,7 @@ * SEC (crypto unit) major compatible version determination */ #if defined(CONFIG_MPC83xx) +#define CONFIG_SYS_FSL_SEC_BE #define CONFIG_SYS_FSL_SEC_COMPAT 2 #endif diff --git a/drivers/crypto/fsl/Makefile b/drivers/crypto/fsl/Makefile index cb13d2e0ae..067d0a917b 100644 --- a/drivers/crypto/fsl/Makefile +++ b/drivers/crypto/fsl/Makefile @@ -6,5 +6,6 @@ # Version 2 as published by the Free Software Foundation. # +obj-y += sec.o obj-$(CONFIG_FSL_CAAM) += jr.o fsl_hash.o jobdesc.o error.o obj-$(CONFIG_CMD_BLOB) += fsl_blob.o diff --git a/drivers/crypto/fsl/sec.c b/drivers/crypto/fsl/sec.c new file mode 100644 index 0000000000..443ee964fe --- /dev/null +++ b/drivers/crypto/fsl/sec.c @@ -0,0 +1,184 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <libfdt.h> +#include <fdt_support.h> +#if CONFIG_SYS_FSL_SEC_COMPAT == 2 || CONFIG_SYS_FSL_SEC_COMPAT >= 4 +#include <fsl_sec.h> +#endif + +/* + * update crypto node properties to a specified revision of the SEC + * called with sec_rev == 0 if not on an E processor + */ +#if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */ +void fdt_fixup_crypto_node(void *blob, int sec_rev) +{ + static const struct sec_rev_prop { + u32 sec_rev; + u32 num_channels; + u32 channel_fifo_len; + u32 exec_units_mask; + u32 descriptor_types_mask; + } sec_rev_prop_list[] = { + { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ + { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ + { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ + { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ + { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ + { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */ + { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */ + }; + static char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * + sizeof("fsl,secX.Y")]; + int crypto_node, sec_idx, err; + char *p; + u32 val; + + /* locate crypto node based on lowest common compatible */ + crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); + if (crypto_node == -FDT_ERR_NOTFOUND) + return; + + /* delete it if not on an E-processor */ + if (crypto_node > 0 && !sec_rev) { + fdt_del_node(blob, crypto_node); + return; + } + + /* else we got called for possible uprev */ + for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++) + if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev) + break; + + if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) { + puts("warning: unknown SEC revision number\n"); + return; + } + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels); + err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask); + err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", + &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask); + err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len); + err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = 0; + while (sec_idx >= 0) { + p = compat_strlist + val; + val += sprintf(p, "fsl,sec%d.%d", + (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8, + sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1; + sec_idx--; + } + err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, + val); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); +} +#elif CONFIG_SYS_FSL_SEC_COMPAT >= 4 /* SEC4 */ +static u8 caam_get_era(void) +{ + static const struct { + u16 ip_id; + u8 maj_rev; + u8 era; + } caam_eras[] = { + {0x0A10, 1, 1}, + {0x0A10, 2, 2}, + {0x0A12, 1, 3}, + {0x0A14, 1, 3}, + {0x0A14, 2, 4}, + {0x0A16, 1, 4}, + {0x0A10, 3, 4}, + {0x0A11, 1, 4}, + {0x0A18, 1, 4}, + {0x0A11, 2, 5}, + {0x0A12, 2, 5}, + {0x0A13, 1, 5}, + {0x0A1C, 1, 5} + }; + + ccsr_sec_t __iomem *sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; + u32 secvid_ms = sec_in32(&sec->secvid_ms); + u32 ccbvid = sec_in32(&sec->ccbvid); + u16 ip_id = (secvid_ms & SEC_SECVID_MS_IPID_MASK) >> + SEC_SECVID_MS_IPID_SHIFT; + u8 maj_rev = (secvid_ms & SEC_SECVID_MS_MAJ_REV_MASK) >> + SEC_SECVID_MS_MAJ_REV_SHIFT; + u8 era = (ccbvid & SEC_CCBVID_ERA_MASK) >> SEC_CCBVID_ERA_SHIFT; + + int i; + + if (era) /* This is '0' prior to CAAM ERA-6 */ + return era; + + for (i = 0; i < ARRAY_SIZE(caam_eras); i++) + if (caam_eras[i].ip_id == ip_id && + caam_eras[i].maj_rev == maj_rev) + return caam_eras[i].era; + + return 0; +} + +static void fdt_fixup_crypto_era(void *blob, u32 era) +{ + int err; + int crypto_node; + + crypto_node = fdt_path_offset(blob, "crypto"); + if (crypto_node < 0) { + printf("WARNING: Missing crypto node\n"); + return; + } + + err = fdt_setprop(blob, crypto_node, "fsl,sec-era", &era, + sizeof(era)); + if (err < 0) { + printf("ERROR: could not set fsl,sec-era property: %s\n", + fdt_strerror(err)); + } +} + +void fdt_fixup_crypto_node(void *blob, int sec_rev) +{ + u8 era; + + if (!sec_rev) { + fdt_del_node_and_alias(blob, "crypto"); + return; + } + + /* Add SEC ERA information in compatible */ + era = caam_get_era(); + if (era) { + fdt_fixup_crypto_era(blob, era); + } else { + printf("WARNING: Unable to get ERA for CAAM rev: %d\n", + sec_rev); + } +} +#endif |
