Merge with /home/git/u-boot

4 files changed, 37 insertions, 21 deletions

diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index f350155c83..1606d0da17 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -108,6 +108,7 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_SPD_EEPROM	1	/* Use SPD EEPROM for setup	*/
 #define SPD_EEPROM_ADDRESS	{0x51, 0x52}	/* SPD i2c spd addresses*/
+#define CONFIG_DDR_ECC		1	/* with ECC support		*/
 #undef  CONFIG_STRESS
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/luan.h b/include/configs/luan.h
index 5c9d208feb..9c8769b200 100644
--- a/include/configs/luan.h
+++ b/include/configs/luan.h
@@ -37,8 +37,9 @@
 #define CONFIG_440		1
 #define CONFIG_SYS_CLK_FREQ	33333333 /* external freq to pll	*/
 
-#define CONFIG_BOARD_EARLY_INIT_F 1     /* call board_early_init_f()	*/
+#define CONFIG_BOARD_EARLY_INIT_F 1	/* call board_early_init_f()	*/
 #define CONFIG_MISC_INIT_R	1	/* call misc_init_r()		*/
+#define CONFIG_ADD_RAM_INFO	1	/* Print additional info	*/
 
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the
@@ -132,10 +133,9 @@
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
-#undef  CONFIG_SPD_EEPROM		/* SPD EEPROM init doesn't support DDR2 */
-#define SPD_EEPROM_ADDRESS {0x52,0x53}	/* I2C SPD addresses */
-#define IIC0_DIMM0_ADDR         0x52
-#define IIC0_DIMM1_ADDR         0x53
+#define CONFIG_SPD_EEPROM	1	/* Use SPD EEPROM for setup	*/
+#define SPD_EEPROM_ADDRESS	{0x53, 0x52}	/* SPD i2c spd addresses*/
+#undef CONFIG_DDR_ECC			/* no ECC support for now	*/
 
 /*-----------------------------------------------------------------------
  * I2C
@@ -206,11 +206,6 @@
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 #define CONFIG_NET_MULTI		/* needed for NetConsole	*/
 
-/* Partitions */
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-
 #ifdef DEBUG
 #define CONFIG_PANIC_HANG
 #else
@@ -219,9 +214,7 @@
 
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL		|	\
 				CFG_CMD_ASKENV		|	\
-			        CFG_CMD_CACHE		|	\
 				CFG_CMD_DHCP		|	\
-				CFG_CMD_DIAG		|	\
 				CFG_CMD_ELF		|	\
 				CFG_CMD_EEPROM		|	\
 				CFG_CMD_I2C		|	\
@@ -232,7 +225,6 @@
 				CFG_CMD_PCI		|	\
 				CFG_CMD_PING		|	\
 				CFG_CMD_REGINFO		|	\
-				CFG_CMD_SETGETDCR	|	\
 				CFG_CMD_SDRAM		|	\
 				0)
 
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 6417ed891d..eb4859c3e9 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -45,11 +45,11 @@
 #define EXTCLK_50		50000000
 #define EXTCLK_83		83333333
 
-#define	CONFIG_IBM_EMAC4_V4		1
-#define	CONFIG_MISC_INIT_F		1	/* Use misc_init_f()	*/
+#define	CONFIG_MISC_INIT_F	1	/* Use misc_init_f()		*/
+#define CONFIG_ADD_RAM_INFO	1	/* Print additional info	*/
 #undef  CONFIG_SHOW_BOOT_PROGRESS
 #undef  CONFIG_STRESS
-#undef  ENABLE_ECC
+
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
@@ -118,10 +118,9 @@
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
-#undef CONFIG_SPD_EEPROM		/* Use SPD EEPROM for setup	*/
-#define SPD_EEPROM_ADDRESS {0x53, 0x52}	/* SPD i2c spd addresses	*/
-#define IIC0_DIMM0_ADDR		0x53
-#define IIC0_DIMM1_ADDR		0x52
+#define CONFIG_SPD_EEPROM	1	/* Use SPD EEPROM for setup	*/
+#define SPD_EEPROM_ADDRESS	{0x53, 0x52}	/* SPD i2c spd addresses*/
+#undef CONFIG_DDR_ECC			/* no ECC support for now	*/
 
 /*-----------------------------------------------------------------------
  * I2C
@@ -211,6 +210,7 @@
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
+#define	CONFIG_IBM_EMAC4_V4	1
 #define CONFIG_MII		1	/* MII PHY management		*/
 #undef CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
diff --git a/include/ppc440.h b/include/ppc440.h
index 25e338fb10..9b15c2c565 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -417,7 +417,9 @@
 #define SDR0_PEGPLLSET1		0x000003A0	/* PE Pll LC Tank Setting1 */
 #define SDR0_PEGPLLSET2		0x000003A1	/* PE Pll LC Tank Setting2 */
 #define SDR0_PEGPLLSTS		0x000003A2	/* PE Pll LC Tank Status */
+#endif /* CONFIG_440SPE */
 
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 /*----------------------------------------------------------------------------+
 | SDRAM Controller
 +----------------------------------------------------------------------------*/
@@ -453,9 +455,16 @@
 /*-----------------------------------------------------------------------------+
 |  Memory Bank 0-7 configuration
 +-----------------------------------------------------------------------------*/
-#define SDRAM_RXBAS_SDBA_MASK		0xFF800000	/* Base address	*/
+#if defined(CONFIG_440SPE)
+#define SDRAM_RXBAS_SDBA_MASK		0xFFE00000	/* Base address	*/
 #define SDRAM_RXBAS_SDBA_ENCODE(n)	((((unsigned long)(n))&0xFFE00000)>>2)
 #define SDRAM_RXBAS_SDBA_DECODE(n)	((((unsigned long)(n))&0xFFE00000)<<2)
+#endif /* CONFIG_440SPE */
+#if defined(CONFIG_440SP)
+#define SDRAM_RXBAS_SDBA_MASK		0xFF800000	/* Base address	*/
+#define SDRAM_RXBAS_SDBA_ENCODE(n)	((((unsigned long)(n))&0xFF800000))
+#define SDRAM_RXBAS_SDBA_DECODE(n)	((((unsigned long)(n))&0xFF800000))
+#endif /* CONFIG_440SP */
 #define SDRAM_RXBAS_SDSZ_MASK		0x0000FFC0	/* Size		*/
 #define SDRAM_RXBAS_SDSZ_ENCODE(n)	((((unsigned long)(n))&0x3FF)<<6)
 #define SDRAM_RXBAS_SDSZ_DECODE(n)	((((unsigned long)(n))>>6)&0x3FF)
@@ -2167,6 +2176,20 @@
 /*-----------------------------------------------------------------------------+
 |  SDR0 Bit Settings
 +-----------------------------------------------------------------------------*/
+#if defined(CONFIG_440SP)
+#define SDR0_SRST			0x0200
+
+#define SDR0_DDR0			0x00E1
+#define SDR0_DDR0_DPLLRST		0x80000000
+#define SDR0_DDR0_DDRM_MASK		0x60000000
+#define SDR0_DDR0_DDRM_DDR1		0x20000000
+#define SDR0_DDR0_DDRM_DDR2		0x40000000
+#define SDR0_DDR0_DDRM_ENCODE(n)	((((unsigned long)(n))&0x03)<<29)
+#define SDR0_DDR0_DDRM_DECODE(n)	((((unsigned long)(n))>>29)&0x03)
+#define SDR0_DDR0_TUNE_ENCODE(n)	((((unsigned long)(n))&0x2FF)<<0)
+#define SDR0_DDR0_TUNE_DECODE(n)	((((unsigned long)(n))>>0)&0x2FF)
+#endif
+
 #if defined(CONFIG_440SPE)
 #define SDR0_CP440			0x0180
 #define SDR0_CP440_ERPN_MASK		0x30000000