Merge with git://www.denx.de/git/u-boot.git

1 files changed, 465 insertions, 0 deletions

diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
new file mode 100644
index 0000000000..8624f4b74b
--- /dev/null
+++ b/include/configs/stxssa.h
@@ -0,0 +1,465 @@
+/*
+ * (C) Copyright 2005 Embedded Alley Solutions, Inc.
+ * Dan Malek <dan@embeddedalley.com>
+ * Copied from STx GP3.
+ * Updates for Silicon Tx GP3 SSA board.
+ *
+ * (C) Copyright 2002,2003 Motorola,Inc.
+ * Xianghua Xiao <X.Xiao@motorola.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* mpc8560ads board configuration file */
+/* please refer to doc/README.mpc85xx for more info */
+/* make sure you change the MAC address and other network params first,
+ * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE		1	/* BOOKE		*/
+#define CONFIG_E500		1	/* BOOKE e500 family	*/
+#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560	*/
+#define CONFIG_CPM2		1	/* has CPM2 */
+#define CONFIG_STXSSA		1	/* Silicon Tx GPPP SSA board specific*/
+
+#undef  CONFIG_PCI	         	/* pci ethernet support	*/
+#define CONFIG_TSEC_ENET 		/* tsec ethernet support*/
+#undef CONFIG_ETHER_ON_FCC             /* cpm FCC ethernet support */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
+#undef  CONFIG_DDR_ECC			/* only for ECC DDR module */
+#undef CONFIG_DDR_DLL                  /* possible DLL fix needed */
+#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */
+
+
+/* sysclk for MPC85xx
+ */
+
+#define CONFIG_SYS_CLK_FREQ     33000000 /* most pci cards are 33Mhz */
+
+/* Blinkin' LEDs for Robert :-)
+*/
+#define CONFIG_SHOW_ACTIVITY 1
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_L2_CACHE                     /* toggle L2 cache         */
+#define  CONFIG_BTB                          /* toggle branch predition */
+#define  CONFIG_ADDR_STREAMING               /* toggle addr streaming   */
+
+#define CONFIG_BOARD_EARLY_INIT_F   1        /* Call board_pre_init      */
+
+#undef  CFG_DRAM_TEST                       /* memory test, takes time  */
+#define CFG_MEMTEST_START       0x00200000  /* memtest region */
+#define CFG_MEMTEST_END         0x00400000
+
+
+/* Localbus connector.  There are many options that can be
+ * connected here, including sdram or lots of flash.
+ * This address, however, is used to configure a 256M local bus
+ * window that includes the Config latch below.
+ */
+#define CFG_LBC_OPTION_BASE	0xf0000000      /* Localbus Extension */
+#define CFG_LBC_OPTION_SIZE	256		/* 256MB */
+
+/* There are various flash options used, we configure for the largest,
+ * which is 64Mbytes.  The CFI works fine and will discover the proper
+ * sizes.
+ */
+#define CFG_FLASH_BASE		0xFC000000      /* start of FLASH 64M    */
+#define CFG_BR0_PRELIM		0xFC001801	/* port size 32bit      */
+#define CFG_OR0_PRELIM		0xFC000FF7	/* 64 MB Flash           */
+
+#define CFG_FLASH_CFI		1
+#define CFG_FLASH_CFI_DRIVER	1
+#undef CFG_FLASH_USE_BUFFER_WRITE 	/* use buffered writes (20x faster) */
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks	*/
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE }
+
+#define CFG_FLASH_PROTECTION
+
+/* The configuration latch is Chip Select 1.
+ * It's an 8-bit latch in the lower 8 bits of the word.
+ */
+#define CFG_LBC_CFGLATCH_BASE	0xfb000000	/* Base of config latch */
+#define CFG_BR1_PRELIM		0xfb001801	/* 32-bit port */
+#define CFG_OR1_PRELIM		0xffff0ff7      /* 64K is enough */
+
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor	*/
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#ifdef CFG_RAMBOOT
+#define CFG_CCSRBAR_DEFAULT 	0x40000000	/* CCSRBAR by BDI cfg	*/
+#else
+#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default	*/
+#endif
+#define CFG_CCSRBAR             0xe0000000      /* relocated CCSRBAR    */
+#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR	*/
+
+
+/*
+ * DDR Setup
+ */
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory  */
+#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE
+
+#define SPD_EEPROM_ADDRESS 	0x54     	/*  DDR DIMM */
+
+#undef CONFIG_CLOCKS_IN_MHZ
+
+/* local bus definitions */
+#define CFG_BR2_PRELIM		0xf8001861	/* 64MB localbus SDRAM  */
+#define CFG_OR2_PRELIM		0xfc006901
+#define CFG_LBC_LCRR		0x00030004	/* local bus freq 	*/
+#define CFG_LBC_LBCR		0x00000000
+#define CFG_LBC_LSRT		0x20000000
+#define CFG_LBC_MRTPR		0x20000000
+#define CFG_LBC_LSDMR_1		0x2861b723
+#define CFG_LBC_LSDMR_2		0x0861b723
+#define CFG_LBC_LSDMR_3		0x0861b723
+#define CFG_LBC_LSDMR_4		0x1861b723
+#define CFG_LBC_LSDMR_5		0x4061b723
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK 	1
+#define CFG_INIT_RAM_ADDR       0x60000000      /* Initial RAM address  */
+#define CFG_INIT_RAM_END    	0x4000	    	/* End of used area in RAM */
+
+#define CFG_GBL_DATA_SIZE  	128		/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    	(256 * 1024)    /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(512 * 1024)    /* Reserved for malloc */
+
+/* Serial Port */
+#define CONFIG_CONS_INDEX     2
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE    1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
+
+#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
+#define  CONFIG_HARD_I2C    		/* I2C with hardware support*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+#if 0
+#define CFG_I2C_NOPROBES        {0x00}  /* Don't probe these addrs */
+#else
+/* I did the 'if 0' so we could keep the syntax above if ever needed. */
+#undef CFG_I2C_NOPROBES
+#endif
+#define CFG_I2C_OFFSET		0x3000
+
+/* I2C EEPROM.  AT24C32, we keep our environment in here.
+*/
+#define CFG_I2C_EEPROM_ADDR		0x51	/* 1010001x		*/
+#define CFG_I2C_EEPROM_ADDR_LEN		2
+#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write	*/
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+
+/*
+ * Standard 8555 PCI mapping.
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x01000000	/* 16M */
+
+#define CFG_PCI2_MEM_BASE	0xa0000000
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	0xe3000000
+#define CFG_PCI2_IO_SIZE	0x01000000	/* 16M */
+
+#if defined(CONFIG_PCI) 		/* PCI Ethernet card */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+  #define PCI_ENET0_IOADDR    	0xe0000000
+  #define PCI_ENET0_MEMADDR     0xe0000000
+  #define PCI_IDSEL_NUMBER      0x0c 	/* slot0->3(IDSEL)=12->15 */
+#endif
+
+#undef CONFIG_PCI_SCAN_SHOW
+#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+
+#endif /* CONFIG_PCI */
+
+#if defined(CONFIG_TSEC_ENET)
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 	1
+#endif
+
+#define CONFIG_MII		1	/* MII PHY management		*/
+
+#define CONFIG_MPC85XX_TSEC1	1
+#define CONFIG_MPC85XX_TSEC1_NAME	"TSEC0"
+#define CONFIG_MPC85XX_TSEC2	1
+#define CONFIG_MPC85XX_TSEC2_NAME	"TSEC1"
+#undef CONFIG_MPS85XX_FEC
+
+#define TSEC1_PHY_ADDR		2
+#define TSEC2_PHY_ADDR		4
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+#define CONFIG_ETHPRIME		"TSEC0"
+
+#elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
+
+#define CONFIG_ETHER_ON_FCC2             /* define if ether on FCC   */
+#undef  CONFIG_ETHER_NONE               /* define if ether on something else */
+#define CONFIG_ETHER_INDEX      2       /* which channel for ether  */
+
+#if (CONFIG_ETHER_INDEX == 2)
+  /*
+   * - Rx-CLK is CLK13
+   * - Tx-CLK is CLK14
+   * - Select bus for bd/buffers
+   * - Full duplex
+   */
+  #define CFG_CMXFCR_MASK       (CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
+  #define CFG_CMXFCR_VALUE      (CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
+  #define CFG_CPMFCR_RAMTYPE    0
+#if 0
+  #define CFG_FCC_PSMR          (FCC_PSMR_FDE)
+#else
+  #define CFG_FCC_PSMR          0
+#endif
+  #define FETH2_RST		0x01
+#elif (CONFIG_ETHER_INDEX == 3)
+  /* need more definitions here for FE3 */
+  #define FETH3_RST		0x80
+#endif  				/* CONFIG_ETHER_INDEX */
+
+/* MDIO is done through the TSEC0 control.
+*/
+#define CONFIG_MII			/* MII PHY management */
+#undef CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
+
+#endif
+
+/* Environment - default config is in flash, see below */
+#if 0	/* in EEPROM */
+#define CFG_ENV_IS_IN_EEPROM	1
+#define CFG_ENV_OFFSET		0
+#define CFG_ENV_SIZE		2048
+#else	/* in flash */
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SECT_SIZE	0x40000
+
+#define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define	CONFIG_TIMESTAMP		/* Print image info with ts	*/
+
+#if defined(CFG_RAMBOOT)
+  #if defined(CONFIG_PCI)
+  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PCI | \
+				CFG_CMD_PING | CFG_CMD_I2C) & \
+				 ~(CFG_CMD_ENV | \
+				  CFG_CMD_LOADS ))
+  #elif defined(CONFIG_TSEC_ENET)
+  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_PING | \
+				CFG_CMD_MII | CFG_CMD_I2C ) & \
+				~(CFG_CMD_ENV))
+  #elif defined(CONFIG_ETHER_ON_FCC)
+  #define  CONFIG_COMMANDS	((CONFIG_CMD_DFL | CFG_CMD_MII | \
+				CFG_CMD_PING | CFG_CMD_I2C) & \
+				~(CFG_CMD_ENV))
+  #endif
+#else
+  #if defined(CONFIG_PCI)
+  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PCI | \
+				CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C)
+  #elif defined(CONFIG_TSEC_ENET)
+  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_PING | \
+				CFG_CMD_ELF | CFG_CMD_MII | CFG_CMD_I2C)
+  #elif defined(CONFIG_ETHER_ON_FCC)
+  #define  CONFIG_COMMANDS	(CONFIG_CMD_DFL | CFG_CMD_MII | \
+				CFG_CMD_ELF | CFG_CMD_PING | CFG_CMD_I2C)
+  #endif
+#endif
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"SSA=> "	/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_LOAD_ADDR	0x1000000	/* default load address */
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot		*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*Note: change below for your network setting!!! */
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
+#define CONFIG_ETHADDR	 00:e0:0c:07:9b:8a
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR  00:e0:0c:07:9b:8b
+#define CONFIG_HAS_ETH2
+#define CONFIG_ETH2ADDR  00:e0:0c:07:9b:8c
+#endif
+
+/*
+ * Environment in EEPROM is compatible with different flash sector sizes,
+ * but only little space is available, so we use a very simple setup.
+ * With environment in flash, we use a more powerful default configuration.
+ */
+#ifdef CFG_ENV_IS_IN_EEPROM		/* use restricted "standard" environment */
+
+#define CONFIG_BAUDRATE	 	38400
+
+#define CONFIG_BOOTDELAY	3	/* -1 disable autoboot */
+#define CONFIG_BOOTCOMMAND	"bootm 0xffc00000 0xffd00000"
+#define CONFIG_BOOTARGS		"root=/dev/nfs rw ip=any console=ttyS1,$baudrate"
+#define CONFIG_SERVERIP 	192.168.85.1
+#define CONFIG_IPADDR  		192.168.85.60
+#define CONFIG_GATEWAYIP	192.168.85.1
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_HOSTNAME 	STX_SSA
+#define CONFIG_ROOTPATH 	/gppproot
+#define CONFIG_BOOTFILE 	uImage
+#define CONFIG_LOADADDR		0x1000000
+
+#else /* ENV IS IN FLASH		-- use a full-blown envionment */
+
+#define CONFIG_BAUDRATE	 	115200
+
+#define CONFIG_BOOTDELAY	5	/* -1 disable autoboot */
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs	*/
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"hostname=gp3ssa\0"						\
+	"bootfile=/tftpboot/gp3ssa/uImage\0"				\
+	"loadaddr=400000\0"						\
+	"netdev=eth0\0"							\
+	"consdev=ttyS1\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$serverip:$rootpath\0"				\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs $bootargs "				\
+		"ip=$ipaddr:$serverip:$gatewayip:$netmask"		\
+		":$hostname:$netdev:off panic=1\0"			\
+	"addcons=setenv bootargs $bootargs "				\
+		"console=$consdev,$baudrate\0"				\
+	"flash_nfs=run nfsargs addip addcons;"				\
+		"bootm $kernel_addr\0"					\
+	"flash_self=run ramargs addip addcons;"				\
+		"bootm $kernel_addr $ramdisk_addr\0"			\
+	"net_nfs=tftp $loadaddr $bootfile;"				\
+		"run nfsargs addip addcons;bootm\0"			\
+	"rootpath=/opt/eldk/ppc_85xx\0"					\
+	"kernel_addr=FC000000\0"					\
+	"ramdisk_addr=FC200000\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#endif	/* CFG_ENV_IS_IN_EEPROM */
+
+#endif	/* __CONFIG_H */