arm: Remove dig297 board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 268 deletions

diff --git a/include/configs/dig297.h b/include/configs/dig297.h
deleted file mode 100644
index 98205adde0..0000000000
--- a/include/configs/dig297.h
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * (C) Copyright 2011 Comelit Group SpA
- * Luca Ceresoli <luca.ceresoli@comelit.it>
- *
- * Based on omap3_beagle.h:
- * (C) Copyright 2006-2008
- * Texas Instruments.
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Mohammed Khasim <x0khasim@ti.com>
- *
- * Configuration settings for the Comelit DIG297 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/mach-types.h>
-#ifdef MACH_TYPE_OMAP3_CPS
-#error "MACH_TYPE_OMAP3_CPS has been defined properly, please remove this."
-#else
-#define MACH_TYPE_OMAP3_CPS 2751
-#endif
-#define CONFIG_MACH_TYPE MACH_TYPE_OMAP3_CPS
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_OMAP		/* in a TI OMAP core */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
-
-#define CONFIG_SYS_TEXT_BASE	0x80008000
-
-#define CONFIG_SDRC	/* The chip has SDRC controller */
-
-#include <asm/arch/cpu.h>		/* get chip and board defs */
-#include <asm/arch/omap.h>
-
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-/* Clock Defines */
-#define V_OSCK			26000000	/* Clock output from T2 */
-#define V_SCLK			(V_OSCK >> 1)
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
-						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(1024 << 10) /* UBI needs >= 512 kB */
-
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-
-/*
- * select serial console configuration: UART3 (ttyO2)
- */
-#define CONFIG_CONS_INDEX		3
-#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
-#define CONFIG_SERIAL3			3
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
-					115200}
-#define CONFIG_GENERIC_MMC		1
-#define CONFIG_MMC			1
-#define CONFIG_OMAP_HSMMC		1
-#define CONFIG_DOS_PARTITION
-
-/* library portions to compile in */
-#define CONFIG_RBTREE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_LZO
-
-/* commands to include */
-#define CONFIG_CMD_FAT		/* FAT support			*/
-#define CONFIG_CMD_UBI		/* UBI Support			*/
-#define CONFIG_CMD_UBIFS	/* UBIFS Support		*/
-#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands    */
-#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
-#define MTDIDS_DEFAULT		"nand0=omap2-nand.0"
-#define MTDPARTS_DEFAULT	"mtdparts=omap2-nand.0:896k(uboot),"\
-				"128k(uboot-env),3m(kernel),252m(ubi)"
-
-#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
-#define CONFIG_CMD_MMC		/* MMC support			*/
-#define CONFIG_CMD_NAND		/* NAND support			*/
-
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
-#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
-#define CONFIG_SYS_I2C_OMAP34XX
-
-/*
- * TWL4030
- */
-#define CONFIG_TWL4030_POWER
-#define CONFIG_TWL4030_LED
-
-/*
- * Board NAND Info.
- */
-#define CONFIG_NAND_OMAP_GPMC
-#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
-#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
-							/* to access nand */
-#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
-							/* to access nand at */
-							/* CS0 */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
-
-#if defined(CONFIG_CMD_NET)
-/*
- * SMSC9220 Ethernet
- */
-
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE     0x2C000000
-
-#endif /* (CONFIG_CMD_NET) */
-
-/* Environment information */
-#define CONFIG_BOOTDELAY		1
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=0x82000000\0" \
-	"console=ttyO2,115200n8\0" \
-	"mtdids=" MTDIDS_DEFAULT "\0" \
-	"mtdparts=" MTDPARTS_DEFAULT "\0" \
-	"partition=nand0,3\0"\
-	"mmcroot=/dev/mmcblk0p2 rw\0" \
-	"mmcrootfstype=ext3 rootwait\0" \
-	"nandroot=ubi0:rootfs ro\0" \
-	"nandrootfstype=ubifs\0" \
-	"nfspath=/srv/nfs\0" \
-	"tftpfilename=uImage\0" \
-	"gatewayip=0.0.0.0\0" \
-	"mmcargs=setenv bootargs console=${console} " \
-		"${mtdparts} " \
-		"root=${mmcroot} " \
-		"rootfstype=${mmcrootfstype} " \
-		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
-			"${netmask}:${hostname}::off\0" \
-	"nandargs=setenv bootargs console=${console} " \
-		"${mtdparts} " \
-		"ubi.mtd=3 " \
-		"root=${nandroot} " \
-		"rootfstype=${nandrootfstype} " \
-		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
-			"${netmask}:${hostname}::off\0" \
-	"netargs=setenv bootargs console=${console} " \
-		"${mtdparts} " \
-		"root=/dev/nfs rw " \
-		"nfsroot=${serverip}:${nfspath} " \
-		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
-			"${netmask}:${hostname}::off\0" \
-	"mmcboot=echo Booting from mmc ...; " \
-		"run mmcargs; " \
-		"bootm ${loadaddr}\0" \
-	"nandboot=echo Booting from nand ...; " \
-		"run nandargs; " \
-		"nand read ${loadaddr} 100000 300000; " \
-		"bootm ${loadaddr}\0" \
-	"netboot=echo Booting from network ...; " \
-		"run netargs; " \
-		"tftp ${loadaddr} ${serverip}:${tftpfilename}; " \
-		"bootm ${loadaddr}\0" \
-	"resetenv=nand erase e0000 20000\0"\
-
-#define CONFIG_BOOTCOMMAND \
-	"run nandboot"
-
-#define CONFIG_AUTO_COMPLETE
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
-
-#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
-								/* works on */
-#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
-					0x01F00000) /* 31MB */
-
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
-							/* load address */
-
-/*
- * OMAP3 has 12 GP timers, they can be driven by the system clock
- * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
- * This rate is divided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
-#define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
-#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-/* **** PISMO SUPPORT *** */
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
-
-#define CONFIG_SYS_FLASH_BASE		boot_flash_base
-
-/* Monitor at start of flash */
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-
-#define CONFIG_ENV_IS_IN_NAND
-#define SMNAND_ENV_OFFSET		0x0E0000 /* environment starts here */
-
-#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
-#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
-#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
-#define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
-
-#endif /* __CONFIG_H */