omap1510inn: arm925t: remove support

omap1510inn is orphan and has been for years now.
Reove it and, as it was the only arm925t target,
also remove arm925t support.
Update doc/README.scrapyard accordingly.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>

2 files changed, 0 insertions, 177 deletions

diff --git a/include/arm925t.h b/include/arm925t.h
deleted file mode 100644
index 3d767b35c0..0000000000
--- a/include/arm925t.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/************************************************
- * NAME	    : arm925t.h
- * Version  : 23 June 2003			*
- ************************************************/
-
-#ifndef __ARM925T_H__
-#define __ARM925T_H__
-
-void archflashwp(void *archdata, int wp);
-
-#endif /*__ARM925T_H__*/
diff --git a/include/configs/omap1510inn.h b/include/configs/omap1510inn.h
deleted file mode 100644
index 1a7e5c7176..0000000000
--- a/include/configs/omap1510inn.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * (C) Copyright 2003
- * Texas Instruments.
- * Kshitij Gupta <kshitij@ti.com>
- * Configuation settings for the TI OMAP Innovator board.
- *
- * SPDX-License-Identifier:	GPL-2.0+ 
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM925T	1		/* This is an arm925t CPU	*/
-#define CONFIG_OMAP	1		/* in a TI OMAP core	*/
-#define CONFIG_OMAP1510 1		/* which is in a 1510 (helen) */
-#define CONFIG_INNOVATOROMAP1510 1	/*	a Innovator Board  */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ	12000000	/* the OMAP1510 Innovator has 12MHz input clock */
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG	 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-/*
-#define CONFIG_DRIVER_SMC9196
-#define CONFIG_SMC9196_BASE 0x08000300
-#define CONFIG_SMC9196_EXT_PHY
-*/
-#define CONFIG_LAN91C96
-#define CONFIG_LAN91C96_BASE 0x08000300
-#define CONFIG_LAN91C96_EXT_PHY
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		(CONFIG_SYS_CLK_FREQ)	/* can be 12M/32Khz or 48Mhz  */
-#define CONFIG_SYS_NS16550_COM1	0xfffb0000		/* uart1, bluetooth uart on helen */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1		1	/* we use SERIAL 1 on OMAP1510 Innovator */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-
-#include <configs/omap1510.h>
-
-#define CONFIG_BOOTDELAY	3
-#define CONFIG_BOOTARGS		"console=ttyS0,115200n8 noinitrd root=/dev/nfs ip=bootp"
-#define CONFIG_BOOTCOMMAND	"bootp;tftp;bootm"
-#define CONFIG_SYS_AUTOLOAD		"n"		/* No autoload */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT		"OMAP1510 Innovator # " /* Monitor Command Prompt	*/
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x10000000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x12000000	/* 32 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x10000000	/* default load address */
-
-/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
- * This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE	OMAP1510_TIMER1_BASE	/* use timer 1 */
-#define CONFIG_SYS_PTV		2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ		1000
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0x10000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */
-
-#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-
-#define PHYS_SRAM		0x20000000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define PHYS_FLASH_SIZE		0x01000000 /* 16MB */
-#define PHYS_FLASH_SECT_SIZE	(128*1024)	/* Size of a sector (128kB) */
-#define CONFIG_SYS_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE)
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE	/* Monitor at beginning of flash */
-#define CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE	/* Reserve 1 sector */
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE }
-
-/*-----------------------------------------------------------------------
- * FLASH driver setup
- */
-#define CONFIG_SYS_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER	1	/* Use drivers/mtd/cfi_flash.c */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1	/* Use buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_PROTECTION	1	/* Use hardware sector protection */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SECT_SIZE	PHYS_FLASH_SECT_SIZE	/* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_OFFSET		( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN )	/* Environment after Monitor */
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR 	PHYS_SRAM
-
-#endif	/* __CONFIG_H */