PowerPC: drop some 74xx_7xx boards and related code

The file  board/Marvell/include/mv_gen_reg.h  is incompatible with
the GPL (see for example the "MARVELL RESERVES THE RIGHT AT ITS SOLE
DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO
MARVELL" clause).  As this cannot be fixed, we remove the file and all
code that depends on it.  Fortunately this only affects some very old
boards that have long reached EOL:
	CPCI750
	DB64360
	DB64460
	p3m750
	p3m7448

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Roger Meier <r.meier@siemens.com>

4 files changed, 0 insertions, 2139 deletions

diff --git a/include/configs/CPCI750.h b/include/configs/CPCI750.h
deleted file mode 100644
index 304a12bea9..0000000000
--- a/include/configs/CPCI750.h
+++ /dev/null
@@ -1,609 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-/*************************************************************************
- * (c) 2004 esd gmbh Hannover
- *
- *
- * from db64360.h file
- * by Reinhard Arlt reinhard.arlt@esd-electronics.com
- *
-  ************************************************************************/
-
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* This define must be before the core.h include */
-#define CONFIG_CPCI750		1	/* this is an CPCI750 board	*/
-
-#ifndef __ASSEMBLY__
-#include <../board/Marvell/include/core.h>
-#endif
-/*-----------------------------------------------------*/
-
-#include "../board/esd/cpci750/local.h"
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_750FX			/* we have a 750FX (override local.h) */
-
-#define CONFIG_CPCI750		1	/* this is an CPCI750 board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#define CONFIG_BAUDRATE		9600	/* console baudrate = 9600	*/
-
-#define CONFIG_MV64360_ECC		/* enable ECC support */
-
-#define CONFIG_HIGH_BATS	1	/* High BATs supported */
-
-/* which initialization functions to call for this board */
-#define CONFIG_MISC_INIT_R
-#define CONFIG_BOARD_PRE_INIT
-#define CONFIG_BOARD_EARLY_INIT_F 1
-
-#define CONFIG_SYS_BOARD_NAME		"CPCI750"
-#define CONFIG_IDENT_STRING	"Marvell 64360 + IBM750FX"
-
-/*#define CONFIG_SYS_HUSH_PARSER*/
-#define CONFIG_SYS_HUSH_PARSER
-
-
-#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
-#define CONFIG_AUTO_COMPLETE		/* add autocompletion support	*/
-
-/* Define which ETH port will be used for connecting the network */
-#define CONFIG_SYS_ETH_PORT		ETH_0
-
-/*
- * The following defines let you select what serial you want to use
- * for your console driver.
- *
- * what to do:
- * to use the DUART, undef CONFIG_MPSC.	 If you have hacked a serial
- * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
- * to 0 below.
- *
- * to use the MPSC, #define CONFIG_MPSC.  If you have wired up another
- * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
- */
-#define CONFIG_MPSC
-#define CONFIG_MPSC_PORT	0
-
-/* to change the default ethernet port, use this define (options: 0, 1, 2) */
-#define MV_ETH_DEVS		1
-#define CONFIG_ETHER_PORT	0
-
-#undef CONFIG_ETHER_PORT_MII	/* use RMII */
-
-#define CONFIG_BOOTDELAY	5	/* autoboot disabled		*/
-
-#define CONFIG_RTC_M48T35A	1	/* ST Electronics M48 timekeeper */
-
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-
-#undef	CONFIG_BOOTARGS
-
-/* -----------------------------------------------------------------------------
- * New bootcommands for Marvell CPCI750 c 2002 Ingo Assmus
- */
-
-#define CONFIG_IPADDR		"192.168.0.185"
-
-#define CONFIG_SERIAL		"AA000001"
-#define CONFIG_SERVERIP		"10.0.0.79"
-#define CONFIG_ROOTPATH		"/export/nfs_cpci750/%s"
-
-#define CONFIG_TESTDRAMDATA	y
-#define CONFIG_TESTDRAMADDRESS	n
-#define CONFIG_TESETDRAMWALK	n
-
-/* ----------------------------------------------------------------------------- */
-
-
-#define CONFIG_LOADS_ECHO	0	/* echo off for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-#undef	CONFIG_ALTIVEC			/* undef to disable		*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-
-
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_USE_CPCIDVI
-
-#ifdef	CONFIG_USE_CPCIDVI
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_CT69000
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_SW_CURSOR
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_I8042_KBD
-#define CONFIG_SYS_ISA_IO 0
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_I2C_SPEED	80000		/* I2C speed default */
-
-#define CONFIG_PRAM 0
-
-#define CONFIG_SYS_GT_DUAL_CPU			/* also for JTAG even with one cpu */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-/*#define CONFIG_SYS_MEMTEST_START	0x00400000*/	/* memtest works on	*/
-/*#define CONFIG_SYS_MEMTEST_END		0x00C00000*/	/* 4 ... 12 MB in DRAM	*/
-/*#define CONFIG_SYS_MEMTEST_END		0x07c00000*/	/* 4 ... 124 MB in DRAM */
-
-/*
-#define CONFIG_SYS_DRAM_TEST
- * DRAM tests
- *   CONFIG_SYS_DRAM_TEST - enables the following tests.
- *
- *   CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines
- *			  Environment variable 'test_dram_data' must be
- *			  set to 'y'.
- *   CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
- *			  addressable. Environment variable
- *			  'test_dram_address' must be set to 'y'.
- *   CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
- *			  This test takes about 6 minutes to test 64 MB.
- *			  Environment variable 'test_dram_walk' must be
- *			  set to 'y'.
- */
-#define CONFIG_SYS_DRAM_TEST
-#if defined(CONFIG_SYS_DRAM_TEST)
-#define CONFIG_SYS_MEMTEST_START		0x00400000	/* memtest works on	*/
-/*#define CONFIG_SYS_MEMTEST_END		0x00C00000*/	/* 4 ... 12 MB in DRAM	*/
-#define CONFIG_SYS_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM */
-#define CONFIG_SYS_DRAM_TEST_DATA
-#define CONFIG_SYS_DRAM_TEST_ADDRESS
-#define CONFIG_SYS_DRAM_TEST_WALK
-#endif /* CONFIG_SYS_DRAM_TEST */
-
-#define CONFIG_DISPLAY_MEMMAP		/* at the end of the bootprocess show the memory map */
-#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT	/* show SPD content during boot */
-
-#define CONFIG_SYS_LOAD_ADDR		0x00300000	/* default load address */
-
-#define CONFIG_SYS_BUS_CLK		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_TCLK		133000000
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
- /*
- * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
- * To an unused memory region. The stack will remain in cache until RAM
- * is initialized
-*/
-#undef	  CONFIG_SYS_INIT_RAM_LOCK
-/* #define CONFIG_SYS_INIT_RAM_ADDR	0x40000000*/ /* unused memory region */
-/* #define CONFIG_SYS_INIT_RAM_ADDR	0xfba00000*/ /* unused memory region */
-#define CONFIG_SYS_INIT_RAM_ADDR	0xf1080000 /* unused memory region */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#define RELOCATE_INTERNAL_RAM_ADDR
-#ifdef RELOCATE_INTERNAL_RAM_ADDR
-/*#define CONFIG_SYS_INTERNAL_RAM_ADDR 0xfba00000*/
-#define CONFIG_SYS_INTERNAL_RAM_ADDR	0xf1080000
-#endif
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-/* Dummies for BAT 4-7 */
-#define CONFIG_SYS_SDRAM1_BASE		0x10000000	/* each 256 MByte */
-#define CONFIG_SYS_SDRAM2_BASE		0x20000000
-#define CONFIG_SYS_SDRAM3_BASE		0x30000000
-#define CONFIG_SYS_SDRAM4_BASE		0x40000000
-#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE	0xfff00000
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 256 kB for malloc */
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI		1	   /* Flash is CFI conformant		*/
-#define CONFIG_SYS_FLASH_PROTECTION	1	   /* use hardware protection		*/
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	   /* use buffered writes (20x faster)	*/
-#define CONFIG_SYS_FLASH_BASE		0xfc000000 /* start of flash banks		*/
-#define CONFIG_SYS_MAX_FLASH_BANKS	4	   /* max number of memory banks	*/
-#define CONFIG_SYS_FLASH_INCREMENT	0x01000000 /* size of  flash bank		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	128	   /* max number of sectors on one chip */
-#define CONFIG_SYS_FLASH_BANKS_LIST  { CONFIG_SYS_FLASH_BASE,				   \
-				CONFIG_SYS_FLASH_BASE + 1*CONFIG_SYS_FLASH_INCREMENT,	   \
-				CONFIG_SYS_FLASH_BASE + 2*CONFIG_SYS_FLASH_INCREMENT,	   \
-				CONFIG_SYS_FLASH_BASE + 3*CONFIG_SYS_FLASH_INCREMENT }
-#define CONFIG_SYS_FLASH_EMPTY_INFO	1	   /* show if bank is empty		*/
-
-/* areas to map different things with the GT in physical space */
-#define CONFIG_SYS_DRAM_BANKS		4
-
-/* What to put in the bats. */
-#define CONFIG_SYS_MISC_REGION_BASE	0xf0000000
-
-/* Peripheral Device section */
-
-/*******************************************************/
-/* We have on the cpci750 Board :		       */
-/* GT-Chipset Register Area			       */
-/* GT-Chipset internal SRAM 256k		       */
-/* SRAM on external device module		       */
-/* Real time clock on external device module	       */
-/* dobble UART on external device module	       */
-/* Data flash on external device module		       */
-/* Boot flash on external device module		       */
-/*******************************************************/
-#define CONFIG_SYS_DFL_GT_REGS		0x14000000				/* boot time GT_REGS */
-#define	 CONFIG_SYS_CPCI750_RESET_ADDR 0x14000000				/* After power on Reset the CPCI750 is here */
-
-#undef	MARVEL_STANDARD_CFG
-#ifndef		MARVEL_STANDARD_CFG
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-#define CONFIG_SYS_GT_REGS		0xf1000000				/* GT Registers will be mapped here */
-/*#define CONFIG_SYS_DEV_BASE		0xfc000000*/				/* GT Devices CS start here */
-#define CONFIG_SYS_INT_SRAM_BASE	0xf1080000				/* GT offers 256k internal fast SRAM */
-
-#define CONFIG_SYS_BOOT_SPACE		0xff000000				/* BOOT_CS0 flash 0    */
-#define CONFIG_SYS_DEV0_SPACE		0xfc000000				/* DEV_CS0 flash 1     */
-#define CONFIG_SYS_DEV1_SPACE		0xfd000000				/* DEV_CS1 flash 2     */
-#define CONFIG_SYS_DEV2_SPACE		0xfe000000				/* DEV_CS2 flash 3     */
-#define CONFIG_SYS_DEV3_SPACE		0xf0000000				/* DEV_CS3 nvram/can   */
-
-#define CONFIG_SYS_BOOT_SIZE		_16M					/* cpci750 flash 0     */
-#define CONFIG_SYS_DEV0_SIZE		_16M					/* cpci750 flash 1     */
-#define CONFIG_SYS_DEV1_SIZE		_16M					/* cpci750 flash 2     */
-#define CONFIG_SYS_DEV2_SIZE		_16M					/* cpci750 flash 3     */
-#define CONFIG_SYS_DEV3_SIZE		_16M					/* cpci750 nvram/can   */
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-#endif
-
-/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */
-#define CONFIG_SYS_DEV0_PAR		0x8FDFFFFF				/* 16 bit flash */
-#define CONFIG_SYS_DEV1_PAR		0x8FDFFFFF				/* 16 bit flash */
-#define CONFIG_SYS_DEV2_PAR		0x8FDFFFFF				/* 16 bit flash */
-#define CONFIG_SYS_DEV3_PAR		0x8FCFFFFF				/* nvram/can	*/
-#define CONFIG_SYS_BOOT_PAR		0x8FDFFFFF				/* 16 bit flash */
-
-	/*   c	  4    a      8	    2	  4    1      c		*/
-	/* 33 22|2222|22 22|111 1|11 11|1 1  |	  |		*/
-	/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210	*/
-	/* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100	*/
-	/*  3| 0|.... ..| 2| 4 |  0 |  4 |  8  |  3  | 4	*/
-
-
-/* MPP Control MV64360 Appendix P P. 632*/
-#define CONFIG_SYS_MPP_CONTROL_0	0x00002222	/*				     */
-#define CONFIG_SYS_MPP_CONTROL_1	0x11110000	/*				     */
-#define CONFIG_SYS_MPP_CONTROL_2	0x11111111	/*				     */
-#define CONFIG_SYS_MPP_CONTROL_3	0x00001111	/*				     */
-/* #define CONFIG_SYS_SERIAL_PORT_MUX	0x00000102*/	/*				     */
-
-
-#define CONFIG_SYS_GPP_LEVEL_CONTROL	0xffffffff	/* 1111 1111 1111 1111 1111 1111 1111 1111*/
-
-/* setup new config_value for MV64360 DDR-RAM To_do !! */
-/*# define CONFIG_SYS_SDRAM_CONFIG	0xd8e18200*/	/* 0x448 */
-/*# define CONFIG_SYS_SDRAM_CONFIG	0xd8e14400*/	/* 0x1400 */
-				/* GB has high prio.
-				   idma has low prio
-				   MPSC has low prio
-				   pci has low prio 1 and 2
-				   cpu has high prio
-				   Data DQS pins == eight (DQS[7:0] foe x8 and x16 devices
-				   ECC disable
-				   non registered DRAM */
-				/* 31:26   25:22  21:20 19 18 17 16 */
-				/* 100001 0000	 010   0   0   0  0 */
-				/* refresh_count=0x400
-				   phisical interleaving disable
-				   virtual interleaving enable */
-				/* 15 14 13:0 */
-				/* 0  1	 0x400 */
-# define CONFIG_SYS_SDRAM_CONFIG	0x58200400	/* 0x1400  copied from Dink32 bzw. VxWorks*/
-
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-
-#define PCI_HOST_ADAPTER 0		/* configure ar pci adapter	*/
-#define PCI_HOST_FORCE	1		/* configure as pci host	*/
-#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/
-
-#define CONFIG_PCI			/* include pci support		*/
-#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/
-#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
-#define CONFIG_PCI_SCAN_SHOW		/* show devices on bus		*/
-
-/* PCI MEMORY MAP section */
-#define CONFIG_SYS_PCI0_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI0_MEM_SIZE	_128M
-#define CONFIG_SYS_PCI1_MEM_BASE	0x88000000
-#define CONFIG_SYS_PCI1_MEM_SIZE	_128M
-
-#define CONFIG_SYS_PCI0_0_MEM_SPACE	(CONFIG_SYS_PCI0_MEM_BASE)
-#define CONFIG_SYS_PCI1_0_MEM_SPACE	(CONFIG_SYS_PCI1_MEM_BASE)
-
-/* PCI I/O MAP section */
-#define CONFIG_SYS_PCI0_IO_BASE	0xfa000000
-#define CONFIG_SYS_PCI0_IO_SIZE	_16M
-#define CONFIG_SYS_PCI1_IO_BASE	0xfb000000
-#define CONFIG_SYS_PCI1_IO_SIZE	_16M
-
-#define CONFIG_SYS_PCI0_IO_SPACE	(CONFIG_SYS_PCI0_IO_BASE)
-#define CONFIG_SYS_PCI0_IO_SPACE_PCI	0x00000000
-#define CONFIG_SYS_PCI1_IO_SPACE	(CONFIG_SYS_PCI1_IO_BASE)
-#define CONFIG_SYS_PCI1_IO_SPACE_PCI	0x00000000
-
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE)
-
-#if defined (CONFIG_750CX)
-#define CONFIG_SYS_PCI_IDSEL 0x0
-#else
-#define CONFIG_SYS_PCI_IDSEL 0x30
-#endif
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff
- *-----------------------------------------------------------------------
- */
-#undef	CONFIG_IDE_8xx_DIRECT		/* no pcmcia interface required */
-#undef	CONFIG_IDE_LED			/* no led for ide supported	*/
-#define CONFIG_IDE_RESET		/* no reset for ide supported	*/
-#define CONFIG_IDE_PREINIT		/* check for units		*/
-
-#define CONFIG_SYS_IDE_MAXBUS		2		/* max. 1 IDE busses	*/
-#define CONFIG_SYS_IDE_MAXDEVICE	(CONFIG_SYS_IDE_MAXBUS*2) /* max. 1 drives per IDE bus */
-
-#define CONFIG_SYS_ATA_BASE_ADDR	0
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0
-#define CONFIG_SYS_ATA_IDE1_OFFSET	0
-
-#define CONFIG_SYS_ATA_DATA_OFFSET	0x0000	/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_REG_OFFSET	0x0000	/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0000	/* Offset for alternate registers	*/
-#ifndef __ASSEMBLY__
-int ata_device(int dev);
-#endif
-#define ATA_DEVICE(dev)                 ata_device(dev)
-#define CONFIG_ATAPI                    1
-
-/*----------------------------------------------------------------------
- * Initial BAT mappings
- */
-
-/* NOTES:
- * 1) GUARDED and WRITE_THRU not allowed in IBATS
- * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
- */
-
-/* SDRAM */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-
-/* init ram */
-#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
-
-/* PCI0, PCI1 in one BAT */
-#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
-#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
-#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* GT regs, bootrom, all the devices, PCI I/O */
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/*
- * 750FX IBAT and DBAT pairs (To_do: define regins for I(D)BAT4 - I(D)BAT7)
- * IBAT4 and DBAT4
- * FIXME: ingo disable BATs for Linux Kernel
- */
-/* #undef SETUP_HIGH_BATS_FX750	*/	/* don't initialize BATS 4-7 */
-#define SETUP_HIGH_BATS_FX750		/* initialize BATS 4-7 */
-
-#ifdef SETUP_HIGH_BATS_FX750
-#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
-
-/* IBAT5 and DBAT5 */
-#define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM2_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM2_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
-
-/* IBAT6 and DBAT6 */
-#define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM3_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM3_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
-
-/* IBAT7 and DBAT7 */
-#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
-
-#else		/* set em out of range for Linux !!!!!!!!!!! */
-#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
-
-/* IBAT5 and DBAT5 */
-#define CONFIG_SYS_IBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT5U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT5L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT4U
-
-/* IBAT6 and DBAT6 */
-#define CONFIG_SYS_IBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT6U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT6L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT4U
-
-/* IBAT7 and DBAT7 */
-#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM4_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT7L (CONFIG_SYS_SDRAM4_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT4U
-
-#endif
-/* FIXME: ingo end: disable BATs for Linux Kernel */
-
-/* I2C addresses for the two DIMM SPD chips */
-#define DIMM0_I2C_ADDR	0x51
-#define DIMM1_I2C_ADDR	0x52
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_BOOT_FLASH_WIDTH	2	/* 16 bit */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	500	/* Timeout for Flash Lock (in ms) */
-
-#if 0
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#define CONFIG_ENV_ADDR		0xFFF78000 /* Marvell 8-Bit Bootflash last sector */
-/* #define CONFIG_ENV_ADDR	   (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */
-#endif
-
-#define CONFIG_ENV_IS_IN_EEPROM	1	/* use EEPROM for environment vars */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x050
-#define CONFIG_ENV_OFFSET		0x200	/* environment starts at the beginning of the EEPROM */
-#define CONFIG_ENV_SIZE		0x600	/* 2048 bytes may be used for env vars*/
-
-#define CONFIG_SYS_NVRAM_BASE_ADDR	0xf0000000		/* NVRAM base address	*/
-#define CONFIG_SYS_NVRAM_SIZE		(32*1024)		/* NVRAM size		*/
-#define CONFIG_SYS_VXWORKS_MAC_PTR	(CONFIG_SYS_NVRAM_BASE_ADDR+CONFIG_SYS_NVRAM_SIZE-0x40)
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * L2CR setup -- make sure this is right for your board!
- * look in include/mpc74xx.h for the defines used here
- */
-
-/*#define CONFIG_SYS_L2*/
-#undef CONFIG_SYS_L2
-
-/*    #ifdef CONFIG_750CX*/
-#if defined (CONFIG_750CX) || defined (CONFIG_750FX)
-#define L2_INIT 0
-#else
-#define L2_INIT		(L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
-			L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-#endif
-
-#define L2_ENABLE	(L2_INIT | L2CR_L2E)
-
-#define CONFIG_SYS_BOARD_ASM_INIT	1
-
-#define CPCI750_SLAVE_TEST	(((in8(0xf0300000) & 0x80) == 0) ? 0 : 1)
-#define CPCI750_ECC_TEST	(((in8(0xf0300000) & 0x02) == 0) ? 1 : 0)
-#define CONFIG_SYS_PLD_VER	0xf0e00000
-
-#define CONFIG_OF_LIBFDT 1
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/DB64360.h b/include/configs/DB64360.h
deleted file mode 100644
index b77c8b2894..0000000000
--- a/include/configs/DB64360.h
+++ /dev/null
@@ -1,579 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-/*************************************************************************
- * (c) 2002 Datentechnik AG - Project: Dino
- *
- *
- * $Id: DB64360.h,v 1.3 2003/04/26 04:58:13 brad Exp $
- *
-  ************************************************************************/
-
-/*************************************************************************
- *
- * History:
- *
- *	$Log: DB64360.h,v $
- *	Revision 1.3  2003/04/26 04:58:13  brad
- *	Cosmetic changes and compiler warning cleanups
- *
- *	Revision 1.2  2003/04/23 15:48:15  ingo
- *	mem. map output added
- *
- *	Revision 1.1  2003/04/17 09:31:42  ias
- *	keymile changes 17_04_2003
- *
- *	Revision 1.10  2003/03/06 12:25:04  ias
- *	750 FX CPU HID settings updated
- *
- *	Revision 1.9  2003/03/03 16:14:36  ias
- *	cleanup compiler warnings of printf fuctions
- *
- *	Revision 1.8  2003/03/03 15:11:44  ias
- *	Marvell MPSC-UART is working
- *
- *	Revision 1.7  2003/02/26 12:15:45  ssu
- *	adapted default parameters to new board flash address
- *
- *	Revision 1.6  2003/02/25 14:55:42  ssu
- *	changed default environment parameters
- *
- *	Revision 1.5  2003/02/21 17:14:23  ias
- *	added extended SPD handling
- *
- *	Revision 1.4  2003/01/14 09:16:08  ias
- *	PPCBoot for Marvel Beta 0.9
- *
- *	Revision 1.3  2002/12/03 13:56:26  ias
- *	Environment in flash support added
- *
- *	Revision 1.2  2002/11/29 16:53:29  ias
- *	Flash support for STM added
- *
- *	Revision 1.1  2002/11/29 13:36:31  ias
- *	Revision 0.1 of PPCBOOT (1.1.5) for Marvell DB64360 IBM750FX Board
- *	- working DDRRAM (only 32MByte of 128MB Modul)
- *	- working I2C Driver for SPD EEPROM read
- *	- working DUART 16650 for Serial Console
- *	- working "console"
- *
- *
- *
- ************************************************************************/
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* This define must be before the core.h include */
-#define CONFIG_DB64360		1	/* this is an DB64360 board	*/
-
-#ifndef __ASSEMBLY__
-#include "../board/Marvell/include/core.h"
-#endif
-
-/*-----------------------------------------------------*/
-/*    #include "../board/db64360/local.h"	      */
-#ifndef __LOCAL_H
-#define __LOCAL_H
-
-/* first ethernet */
-#define CONFIG_ETHADDR		64:36:00:00:00:01
-											     /* next two ethernet hwaddrs */
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR		64:36:00:00:00:02
-/* in the atlantis 64360 we have only 2 ETH port on the board,
-if we use PCI it has its own MAC addr */
-
-#define CONFIG_ENV_OVERWRITE
-#endif	/* __CONFIG_H */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_74xx			/* we have a 750FX (override local.h) */
-
-#define CONFIG_DB64360		1	/* this is an DB64360 board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#define CONFIG_BAUDRATE		115200	/* console baudrate = 115000	*/
-/*ronen - we don't use the global CONFIG_ECC, since in the global ecc we initialize the
-	DRAM for ECC in the phase we are relocating to it, which isn't so sufficient.
-	so we will define our ECC CONFIG and initilize the DRAM for ECC in the DRAM initialization phase,
-	see sdram_init.c   */
-#undef CONFIG_ECC	 /* enable ECC support */
-#define CONFIG_MV64360_ECC
-
-/* which initialization functions to call for this board */
-#define CONFIG_MISC_INIT_R     /* initialize the icache L1 */
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#define CONFIG_SYS_BOARD_NAME		"DB64360"
-#define CONFIG_IDENT_STRING	"Marvell DB64360 (1.1)"
-
-/*#define CONFIG_SYS_HUSH_PARSER */
-#undef CONFIG_SYS_HUSH_PARSER
-
-
-/*
- * The following defines let you select what serial you want to use
- * for your console driver.
- *
- * what to do:
- * to use the DUART, undef CONFIG_MPSC.	 If you have hacked a serial
- * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
- * to 0 below.
- *
- * to use the MPSC, #define CONFIG_MPSC.  If you have wired up another
- * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
- */
-
-#define CONFIG_MPSC_PORT	0
-
-/* to change the default ethernet port, use this define (options: 0, 1, 2) */
-#define MV_ETH_DEVS 2
-
-/* #undef CONFIG_ETHER_PORT_MII	 */
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	3	/* autoboot after 5 seconds	*/
-#endif
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-
-#undef	CONFIG_BOOTARGS
-/*#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" */
-
-/* ronen - autoboot using tftp */
-#if (CONFIG_BOOTDELAY >= 0)
-#define CONFIG_BOOTCOMMAND	"tftpboot 0x400000 uImage;\
- setenv bootargs ${bootargs} ${bootargs_root} nfsroot=${serverip}:${rootpath} \
- ip=${ipaddr}:${serverip}${bootargs_end};  bootm 0x400000; "
-
-#define CONFIG_BOOTARGS "console=ttyS0,115200"
-
-#endif
-
-/* ronen - the u-boot.bin should be ~0x30000 bytes */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-     "burn_uboot_sep= tftp 100000 u-boot.bin;protect off all;era FFF00000 FFF4ffff; \
-cp.b 100000 FFF00000 0x40000;protect on 1:0-4;\0" \
-      "burn_uboot_dep= tftp 100000 u-boot.bin;protect off all;era FFF00000 FFF7ffff; \
-cp.b 100000 FFF00000 0x40000;protect on 1:0-7;\0" \
-      "bootargs_root=root=/dev/nfs rw\0" \
-      "bootargs_end=:::DB64360:eth0:none \0"\
-      "ethprime=mv_enet0\0"\
-      "standalone=fsload 0x400000 uImage;setenv bootargs ${bootargs} root=/dev/mtdblock/0 rw \
-ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
-
-/* --------------------------------------------------------------------------------------------------------------- */
-/* New bootcommands for Marvell DB64360 c 2002 Ingo Assmus */
-
-#define CONFIG_IPADDR		10.2.40.90
-
-#define CONFIG_SERIAL		"No. 1"
-#define CONFIG_SERVERIP		10.2.1.126
-#define CONFIG_ROOTPATH		"/mnt/yellow_dog_mini"
-
-
-#define CONFIG_TESTDRAMDATA	y
-#define CONFIG_TESTDRAMADDRESS	n
-#define CONFIG_TESETDRAMWALK	n
-
-/* --------------------------------------------------------------------------------------------------------------- */
-
-#define CONFIG_LOADS_ECHO	0	/* echo off for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-#undef	CONFIG_ALTIVEC			/* undef to disable		*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor1"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-
-/* Use first bank for JFFS2, second bank contains U-Boot.
- *
- * Note: fake mtd_id's used, no linux mtd map file.
- */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nor1=db64360-1"
-#define MTDPARTS_DEFAULT	"mtdparts=db64360-1:-(jffs2)"
-*/
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_I2C_SPEED	40000		/* I2C speed default */
-
-/* #define CONFIG_SYS_GT_DUAL_CPU	 also for JTAG even with one cpu */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-/*#define CONFIG_SYS_MEMTEST_START	0x00400000	 memtest works on	*/
-/*#define CONFIG_SYS_MEMTEST_END		0x00C00000	 4 ... 12 MB in DRAM	*/
-/*#define CONFIG_SYS_MEMTEST_END		0x07c00000	 4 ... 124 MB in DRAM	*/
-
-/*
-#define CONFIG_SYS_DRAM_TEST
- * DRAM tests
- *   CONFIG_SYS_DRAM_TEST - enables the following tests.
- *
- *   CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines
- *			  Environment variable 'test_dram_data' must be
- *			  set to 'y'.
- *   CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
- *			  addressable. Environment variable
- *			  'test_dram_address' must be set to 'y'.
- *   CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
- *			  This test takes about 6 minutes to test 64 MB.
- *			  Environment variable 'test_dram_walk' must be
- *			  set to 'y'.
- */
-#define CONFIG_SYS_DRAM_TEST
-#if defined(CONFIG_SYS_DRAM_TEST)
-#define CONFIG_SYS_MEMTEST_START		0x00400000	/* memtest works on	*/
-/* #define CONFIG_SYS_MEMTEST_END		0x00C00000	 4 ... 12 MB in DRAM	*/
-#define CONFIG_SYS_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM */
-#define CONFIG_SYS_DRAM_TEST_DATA
-#define CONFIG_SYS_DRAM_TEST_ADDRESS
-#define CONFIG_SYS_DRAM_TEST_WALK
-#endif /* CONFIG_SYS_DRAM_TEST */
-
-#undef CONFIG_DISPLAY_MEMMAP		/* at the end of the bootprocess show the memory map */
-#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT	/* show SPD content during boot */
-
-#define CONFIG_SYS_LOAD_ADDR		0x00400000	/* default load address */
-
-/*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */
-#define CONFIG_SYS_BUS_CLK		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
-
-#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP 7 /* define the SDRAM cycle count */
-#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP 50 /* for 400MHZ -> 5.0 ns, for 133MHZ -> 7.50 ns */
-
-/*ronen - this is the Tclk (MV64360 core) */
-#define CONFIG_SYS_TCLK		133000000
-
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_750FX_HID0		0x8000c084
-#define CONFIG_SYS_750FX_HID1		0x54800000
-#define CONFIG_SYS_750FX_HID2		0x00000000
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
-/*
- * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
- * To an unused memory region. The stack will remain in cache until RAM
- * is initialized
-*/
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000 /* unused memory region */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#define RELOCATE_INTERNAL_RAM_ADDR
-#ifdef RELOCATE_INTERNAL_RAM_ADDR
-	#define CONFIG_SYS_INTERNAL_RAM_ADDR	0xf8000000
-#endif
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-/* Dummies for BAT 4-7 */
-#define CONFIG_SYS_SDRAM1_BASE		0x10000000	/* each 256 MByte */
-#define CONFIG_SYS_SDRAM2_BASE		0x20000000
-#define CONFIG_SYS_SDRAM3_BASE		0x30000000
-#define CONFIG_SYS_SDRAM4_BASE		0x40000000
-#define CONFIG_SYS_FLASH_BASE			0xfff00000
-
-#define CONFIG_SYS_DFL_BOOTCS_BASE	0xff800000
-#define CONFIG_VERY_BIG_RAM		/* we will use up to 256M memory for cause we are short of BATS*/
-
-#define BRIDGE_REG_BASE_BOOTM 0xfbe00000 /* this paramaters are used when booting the linux kernel */
-#define UART_BASE_BOOTM	      0xfbb00000 /* in order to be sync with the kernel parameters. */
-#define PCI0_IO_BASE_BOOTM    0xfd000000
-
-#define CONFIG_SYS_RESET_ADDRESS		0xfff00100
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
-
-/* areas to map different things with the GT in physical space */
-#define CONFIG_SYS_DRAM_BANKS		4
-
-/* What to put in the bats. */
-#define CONFIG_SYS_MISC_REGION_BASE	0xf0000000
-
-/* Peripheral Device section */
-
-/*******************************************************/
-/* We have on the db64360 Board :		   */
-/* GT-Chipset Register Area				*/
-/* GT-Chipset internal SRAM 256k		    */
-/* SRAM on external device module		   */
-/* Real time clock on external device module	  */
-/* dobble UART on external device module	 */
-/* Data flash on external device module		    */
-/* Boot flash on external device module		    */
-/*******************************************************/
-#define CONFIG_SYS_DFL_GT_REGS		0x14000000				/* boot time GT_REGS */
-#define	 CONFIG_SYS_DB64360_RESET_ADDR 0x14000000				/* After power on Reset the DB64360 is here */
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-#define CONFIG_SYS_GT_REGS		0xf1000000				/* GT Registers will be mapped here */
-#define CONFIG_SYS_DEV_BASE		0xfc000000				/* GT Devices CS start here */
-
-#define CONFIG_SYS_DEV0_SPACE		CONFIG_SYS_DEV_BASE				/* DEV_CS0 device modul sram */
-#define CONFIG_SYS_DEV1_SPACE		(CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE)	/* DEV_CS1 device modul real time clock (rtc) */
-#define CONFIG_SYS_DEV2_SPACE		(CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE)	/* DEV_CS2 device modul doubel uart (duart) */
-#define CONFIG_SYS_DEV3_SPACE		(CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE)	/* DEV_CS3 device modul large flash */
-
-#define CONFIG_SYS_DEV0_SIZE		 _8M					/* db64360 sram	 @ 0xfc00.0000 */
-#define CONFIG_SYS_DEV1_SIZE		 _8M					/* db64360 rtc	 @ 0xfc80.0000 */
-#define CONFIG_SYS_DEV2_SIZE		_16M					/* db64360 duart @ 0xfd00.0000 */
-#define CONFIG_SYS_DEV3_SIZE		_16M					/* db64360 flash @ 0xfe00.0000 */
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-
-/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */
-#define CONFIG_SYS_DEV0_PAR		0x8FEFFFFF				/* 32Bit  sram */
-#define CONFIG_SYS_DEV1_PAR		0x8FCFFFFF				/* 8Bit	 rtc */
-#define CONFIG_SYS_DEV2_PAR		0x8FCFFFFF				/* 8Bit duart */
-#define CONFIG_SYS_8BIT_BOOT_PAR	0x8FCFFFFF				/* 8Bit flash */
-#define CONFIG_SYS_32BIT_BOOT_PAR	0x8FEFFFFF				/* 32Bit flash */
-
-	/*   c	  4    a      8	    2	  4    1      c		*/
-	/* 33 22|2222|22 22|111 1|11 11|1 1  |	  |		*/
-	/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210	*/
-	/* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100	*/
-	/*  3| 0|.... ..| 2| 4 |  0 |  4 |  8  |  3  | 4	*/
-
-
-/* ronen - update MPP Control MV64360*/
-#define CONFIG_SYS_MPP_CONTROL_0	0x02222222
-#define CONFIG_SYS_MPP_CONTROL_1	0x11333011
-#define CONFIG_SYS_MPP_CONTROL_2	0x40431111
-#define CONFIG_SYS_MPP_CONTROL_3	0x00000044
-
-/*# define CONFIG_SYS_SERIAL_PORT_MUX	0x00000102	 0=hiZ	1=MPSC0 2=ETH 0 and 2 RMII */
-
-
-# define CONFIG_SYS_GPP_LEVEL_CONTROL	0x2c600000	/* 1111 1001 0000 1111 1100 0000 0000 0000*/
-							/* gpp[31]		gpp[30]		gpp[29]		gpp[28] */
-				/* gpp[27]			gpp[24]*/
-							/* gpp[19:14] */
-
-/* setup new config_value for MV64360 DDR-RAM !! */
-# define CONFIG_SYS_SDRAM_CONFIG	0x58200400	/* 0x1400  copied from Dink32 bzw. VxWorks*/
-
-#define CONFIG_SYS_DUART_IO		CONFIG_SYS_DEV2_SPACE
-#define CONFIG_SYS_DUART_CHAN		1		/* channel to use for console */
-#define CONFIG_SYS_INIT_CHAN1
-#define CONFIG_SYS_INIT_CHAN2
-
-#define SRAM_BASE		CONFIG_SYS_DEV0_SPACE
-#define SRAM_SIZE		0x00100000		/* 1 MB of sram */
-
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-
-#define PCI_HOST_ADAPTER 0		/* configure ar pci adapter	*/
-#define PCI_HOST_FORCE	1		/* configure as pci host	*/
-#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/
-
-#define CONFIG_PCI			/* include pci support		*/
-#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/
-#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
-#define CONFIG_EEPRO100			/* ronen - Support for Intel 82557/82559/82559ER chips */
-
-/* PCI MEMORY MAP section */
-#define CONFIG_SYS_PCI0_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI0_MEM_SIZE	_128M
-#define CONFIG_SYS_PCI1_MEM_BASE	0x88000000
-#define CONFIG_SYS_PCI1_MEM_SIZE	_128M
-
-#define CONFIG_SYS_PCI0_0_MEM_SPACE	(CONFIG_SYS_PCI0_MEM_BASE)
-#define CONFIG_SYS_PCI1_0_MEM_SPACE	(CONFIG_SYS_PCI1_MEM_BASE)
-
-/* PCI I/O MAP section */
-#define CONFIG_SYS_PCI0_IO_BASE	0xfa000000
-#define CONFIG_SYS_PCI0_IO_SIZE	_16M
-#define CONFIG_SYS_PCI1_IO_BASE	0xfb000000
-#define CONFIG_SYS_PCI1_IO_SIZE	_16M
-
-#define CONFIG_SYS_PCI0_IO_SPACE	(CONFIG_SYS_PCI0_IO_BASE)
-#define CONFIG_SYS_PCI0_IO_SPACE_PCI	(CONFIG_SYS_PCI0_IO_BASE) /* ronen we want phy=bus 0x00000000 */
-#define CONFIG_SYS_PCI1_IO_SPACE	(CONFIG_SYS_PCI1_IO_BASE)
-#define CONFIG_SYS_PCI1_IO_SPACE_PCI	(CONFIG_SYS_PCI1_IO_BASE) /* ronen we want phy=bus 0x00000000 */
-
-#if defined (CONFIG_750CX)
-#define CONFIG_SYS_PCI_IDSEL 0x0
-#else
-#define CONFIG_SYS_PCI_IDSEL 0x30
-#endif
-/*----------------------------------------------------------------------
- * Initial BAT mappings
- */
-
-/* NOTES:
- * 1) GUARDED and WRITE_THRU not allowed in IBATS
- * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
- */
-
-/* SDRAM */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-
-/* init ram */
-#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
-
-/* PCI0, PCI1 in one BAT */
-#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
-#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
-#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* GT regs, bootrom, all the devices, PCI I/O */
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/* I2C addresses for the two DIMM SPD chips */
-#define DIMM0_I2C_ADDR	0x56
-#define DIMM1_I2C_ADDR	0x54
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
-
-#define CONFIG_SYS_EXTRA_FLASH_DEVICE	DEVICE3 /* extra flash at device 3 */
-#define CONFIG_SYS_EXTRA_FLASH_WIDTH	4	/* 32 bit */
-#define CONFIG_SYS_BOOT_FLASH_WIDTH	1	/* 8 bit */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	500	/* Timeout for Flash Lock (in ms) */
-#define CONFIG_SYS_FLASH_CFI		1
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#define CONFIG_ENV_ADDR	      0xFFF78000 /* Marvell 8-Bit Bootflash last sector */
-/* #define CONFIG_ENV_ADDR	   (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * L2CR setup -- make sure this is right for your board!
- * look in include/mpc74xx.h for the defines used here
- */
-
-#define CONFIG_SYS_L2
-
-
-#if defined (CONFIG_750CX) || defined (CONFIG_750FX)
-#define L2_INIT 0
-#else
-
-#define L2_INIT		0
-/*
-#define L2_INIT		(L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
-			L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-*/
-#endif
-
-#define L2_ENABLE	(L2_INIT | L2CR_L2E)
-
-#define CONFIG_SYS_BOARD_ASM_INIT	1
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/DB64460.h b/include/configs/DB64460.h
deleted file mode 100644
index abc443499c..0000000000
--- a/include/configs/DB64460.h
+++ /dev/null
@@ -1,517 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* This define must be before the core.h include */
-#define CONFIG_DB64460		1	/* this is an DB64460 board	*/
-
-#ifndef __ASSEMBLY__
-#include "../board/Marvell/include/core.h"
-#endif
-
-/*-----------------------------------------------------*/
-/*    #include "../board/db64460/local.h"	      */
-#ifndef __LOCAL_H
-#define __LOCAL_H
-
-#define CONFIG_ETHADDR		64:46:00:00:00:01
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR		64:46:00:00:00:02
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR		64:46:00:00:00:03
-
-#define CONFIG_ENV_OVERWRITE
-#endif	/* __CONFIG_H */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_74xx			/* we have a 750FX (override local.h) */
-
-#define CONFIG_DB64460		1	/* this is an DB64460 board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#define CONFIG_BAUDRATE		115200	/* console baudrate = 115000	*/
-/*ronen - we don't use the global CONFIG_ECC, since in the global ecc we initialize the
-	DRAM for ECC in the phase we are relocating to it, which isn't so sufficient.
-	so we will define our ECC CONFIG and initilize the DRAM for ECC in the DRAM initialization phase,
-	see sdram_init.c   */
-#undef CONFIG_ECC	 /* enable ECC support */
-#define CONFIG_MV64460_ECC
-
-/* which initialization functions to call for this board */
-#define CONFIG_MISC_INIT_R     /* initialize the icache L1 */
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#define CONFIG_SYS_BOARD_NAME		"DB64460"
-#define CONFIG_IDENT_STRING	"Marvell DB64460 (1.0)"
-
-/*#define CONFIG_SYS_HUSH_PARSER */
-#undef CONFIG_SYS_HUSH_PARSER
-
-
-/*
- * The following defines let you select what serial you want to use
- * for your console driver.
- *
- * what to do:
- * to use the DUART, undef CONFIG_MPSC.	 If you have hacked a serial
- * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1
- * to 0 below.
- *
- * to use the MPSC, #define CONFIG_MPSC.  If you have wired up another
- * mpsc channel, change CONFIG_MPSC_PORT to the desired value.
- */
-
-#define CONFIG_MPSC_PORT	0
-
-/* to change the default ethernet port, use this define (options: 0, 1, 2) */
-#define MV_ETH_DEVS 3
-
-/* #undef CONFIG_ETHER_PORT_MII	 */
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	3	/* autoboot after 5 seconds	*/
-#endif
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-
-#undef	CONFIG_BOOTARGS
-/*#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" */
-
-/* ronen - autoboot using tftp */
-#if (CONFIG_BOOTDELAY >= 0)
-#define CONFIG_BOOTCOMMAND	"tftpboot 0x400000 uImage;\
- setenv bootargs ${bootargs} ${bootargs_root} nfsroot=${serverip}:${rootpath} \
- ip=${ipaddr}:${serverip}${bootargs_end};  bootm 0x400000; "
-
-#define CONFIG_BOOTARGS "console=ttyS0,115200"
-
-#endif
-
-/* ronen - the u-boot.bin should be ~0x30000 bytes */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-     "burn_uboot_sep= tftp 100000 u-boot.bin;protect off all;era FFF00000 FFF4ffff; \
-cp.b 100000 FFF00000 0x40000;protect on 1:0-4;\0" \
-      "burn_uboot_dep= tftp 100000 u-boot.bin;protect off all;era FFF00000 FFF7ffff; \
-cp.b 100000 FFF00000 0x40000;protect on 1:0-7;\0" \
-      "bootargs_root=root=/dev/nfs rw\0" \
-      "bootargs_end=:::DB64460:eth0:none \0"\
-      "ethprime=mv_enet0\0"\
-      "standalone=fsload 0x400000 uImage;setenv bootargs ${bootargs} root=/dev/mtdblock/0 rw \
-ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0"
-
-/* --------------------------------------------------------------------------------------------------------------- */
-/* New bootcommands for Marvell DB64460 c 2002 Ingo Assmus */
-
-#define CONFIG_IPADDR		10.2.40.90
-
-#define CONFIG_SERIAL		"No. 1"
-#define CONFIG_SERVERIP		10.2.1.126
-#define CONFIG_ROOTPATH		"/mnt/yellow_dog_mini"
-
-
-#define CONFIG_TESTDRAMDATA	y
-#define CONFIG_TESTDRAMADDRESS	n
-#define CONFIG_TESETDRAMWALK	n
-
-/* --------------------------------------------------------------------------------------------------------------- */
-
-#define CONFIG_LOADS_ECHO	0	/* echo off for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE		/* allow baudrate changes	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-#undef	CONFIG_ALTIVEC			/* undef to disable		*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor1"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-
-/* Use first bank for JFFS2, second bank contains U-Boot.
- *
- * Note: fake mtd_id's used, no linux mtd map file.
- */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		"nor1=db64460-1"
-#define MTDPARTS_DEFAULT	"mtdparts=db64460-1:-(jffs2)"
-*/
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_NET
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
-#define CONFIG_SYS_I2C_SPEED	40000		/* I2C speed default */
-
-/* #define CONFIG_SYS_GT_DUAL_CPU	 also for JTAG even with one cpu */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-/*#define CONFIG_SYS_MEMTEST_START	0x00400000	 memtest works on	*/
-/*#define CONFIG_SYS_MEMTEST_END		0x00C00000	 4 ... 12 MB in DRAM	*/
-/*#define CONFIG_SYS_MEMTEST_END		0x07c00000	 4 ... 124 MB in DRAM	*/
-
-/*
-#define CONFIG_SYS_DRAM_TEST
- * DRAM tests
- *   CONFIG_SYS_DRAM_TEST - enables the following tests.
- *
- *   CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines
- *			  Environment variable 'test_dram_data' must be
- *			  set to 'y'.
- *   CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely
- *			  addressable. Environment variable
- *			  'test_dram_address' must be set to 'y'.
- *   CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test.
- *			  This test takes about 6 minutes to test 64 MB.
- *			  Environment variable 'test_dram_walk' must be
- *			  set to 'y'.
- */
-#define CONFIG_SYS_DRAM_TEST
-#if defined(CONFIG_SYS_DRAM_TEST)
-#define CONFIG_SYS_MEMTEST_START		0x00400000	/* memtest works on	*/
-/* #define CONFIG_SYS_MEMTEST_END		0x00C00000	 4 ... 12 MB in DRAM	*/
-#define CONFIG_SYS_MEMTEST_END		0x07c00000	/* 4 ... 124 MB in DRAM */
-#define CONFIG_SYS_DRAM_TEST_DATA
-#define CONFIG_SYS_DRAM_TEST_ADDRESS
-#define CONFIG_SYS_DRAM_TEST_WALK
-#endif /* CONFIG_SYS_DRAM_TEST */
-
-#undef CONFIG_DISPLAY_MEMMAP		/* at the end of the bootprocess show the memory map */
-#undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT	/* show SPD content during boot */
-
-#define CONFIG_SYS_LOAD_ADDR		0x00400000	/* default load address */
-
-/*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */
-#define CONFIG_SYS_BUS_CLK		133000000	/* 133 MHz (CPU = 5*Bus = 666MHz)		*/
-
-#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP 7 /* define the SDRAM cycle count */
-#define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP 50 /* for 200MHZ -> 5.0 ns, 166MHZ -> 6.0, 133MHZ -> 7.50 ns */
-
-/*ronen - this is the Tclk (MV64460 core) */
-#define CONFIG_SYS_TCLK		133000000
-
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_750FX_HID0		0x8000c084
-#define CONFIG_SYS_750FX_HID1		0x54800000
-#define CONFIG_SYS_750FX_HID2		0x00000000
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-
-/*
- * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
- * To an unused memory region. The stack will remain in cache until RAM
- * is initialized
-*/
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0x40000000 /* unused memory region */
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#define RELOCATE_INTERNAL_RAM_ADDR
-#ifdef RELOCATE_INTERNAL_RAM_ADDR
-	#define CONFIG_SYS_INTERNAL_RAM_ADDR	0xf8000000
-#endif
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-/* Dummies for BAT 4-7 */
-#define CONFIG_SYS_SDRAM1_BASE		0x10000000	/* each 256 MByte */
-#define CONFIG_SYS_SDRAM2_BASE		0x20000000
-#define CONFIG_SYS_SDRAM3_BASE		0x30000000
-#define CONFIG_SYS_SDRAM4_BASE		0x40000000
-#define CONFIG_SYS_FLASH_BASE			0xfff00000
-
-#define CONFIG_SYS_DFL_BOOTCS_BASE	0xff800000
-#define CONFIG_VERY_BIG_RAM		/* we will use up to 256M memory for cause we are short of BATS*/
-
-#define BRIDGE_REG_BASE_BOOTM 0xfbe00000 /* this paramaters are used when booting the linux kernel */
-#define UART_BASE_BOOTM	      0xfbb00000 /* in order to be sync with the kernel parameters. */
-#define PCI0_IO_BASE_BOOTM    0xfd000000
-
-#define CONFIG_SYS_RESET_ADDRESS		0xfff00100
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
-
-/* areas to map different things with the GT in physical space */
-#define CONFIG_SYS_DRAM_BANKS		4
-
-/* What to put in the bats. */
-#define CONFIG_SYS_MISC_REGION_BASE	0xf0000000
-
-/* Peripheral Device section */
-
-/*******************************************************/
-/* We have on the db64460 Board :		   */
-/* GT-Chipset Register Area				*/
-/* GT-Chipset internal SRAM 256k		    */
-/* SRAM on external device module		   */
-/* Real time clock on external device module	  */
-/* dobble UART on external device module	 */
-/* Data flash on external device module		    */
-/* Boot flash on external device module		    */
-/*******************************************************/
-#define CONFIG_SYS_DFL_GT_REGS		0x14000000				/* boot time GT_REGS */
-#define	 CONFIG_SYS_DB64460_RESET_ADDR 0x14000000				/* After power on Reset the DB64460 is here */
-
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-#define CONFIG_SYS_GT_REGS		0xf1000000				/* GT Registers will be mapped here */
-#define CONFIG_SYS_DEV_BASE		0xfc000000				/* GT Devices CS start here */
-
-#define CONFIG_SYS_DEV0_SPACE		CONFIG_SYS_DEV_BASE				/* DEV_CS0 device modul sram */
-#define CONFIG_SYS_DEV1_SPACE		(CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE)	/* DEV_CS1 device modul real time clock (rtc) */
-#define CONFIG_SYS_DEV2_SPACE		(CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE)	/* DEV_CS2 device modul doubel uart (duart) */
-#define CONFIG_SYS_DEV3_SPACE		(CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE)	/* DEV_CS3 device modul large flash */
-
-#define CONFIG_SYS_DEV0_SIZE		 _8M					/* db64460 sram	 @ 0xfc00.0000 */
-#define CONFIG_SYS_DEV1_SIZE		 _8M					/* db64460 rtc	 @ 0xfc80.0000 */
-#define CONFIG_SYS_DEV2_SIZE		_16M					/* db64460 duart @ 0xfd00.0000 */
-#define CONFIG_SYS_DEV3_SIZE		_16M					/* db64460 flash @ 0xfe00.0000 */
-/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
-
-/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */
-#define CONFIG_SYS_DEV0_PAR		0x8FEFFFFF				/* 32Bit  sram */
-#define CONFIG_SYS_DEV1_PAR		0x8FCFFFFF				/* 8Bit	 rtc */
-#define CONFIG_SYS_DEV2_PAR		0x8FCFFFFF				/* 8Bit duart */
-#define CONFIG_SYS_8BIT_BOOT_PAR	0x8FCFFFFF				/* 8Bit flash */
-#define CONFIG_SYS_32BIT_BOOT_PAR	0x8FEFFFFF				/* 32Bit flash */
-
-	/*   c	  4    a      8	    2	  4    1      c		*/
-	/* 33 22|2222|22 22|111 1|11 11|1 1  |	  |		*/
-	/* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210	*/
-	/* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100	*/
-	/*  3| 0|.... ..| 2| 4 |  0 |  4 |  8  |  3  | 4	*/
-
-
-/* ronen - update MPP Control MV64460*/
-#define CONFIG_SYS_MPP_CONTROL_0	0x02222222
-#define CONFIG_SYS_MPP_CONTROL_1	0x11333011
-#define CONFIG_SYS_MPP_CONTROL_2	0x40431111
-#define CONFIG_SYS_MPP_CONTROL_3	0x00000044
-
-/*# define CONFIG_SYS_SERIAL_PORT_MUX	0x00000102	 0=hiZ	1=MPSC0 2=ETH 0 and 2 RMII */
-
-
-# define CONFIG_SYS_GPP_LEVEL_CONTROL	0x2c600000	/* 1111 1001 0000 1111 1100 0000 0000 0000*/
-							/* gpp[31]		gpp[30]		gpp[29]		gpp[28] */
-				/* gpp[27]			gpp[24]*/
-							/* gpp[19:14] */
-
-/* setup new config_value for MV64460 DDR-RAM !! */
-# define CONFIG_SYS_SDRAM_CONFIG	0x58200400	/* 0x1400  copied from Dink32 bzw. VxWorks*/
-
-#define CONFIG_SYS_DUART_IO		CONFIG_SYS_DEV2_SPACE
-#define CONFIG_SYS_DUART_CHAN		1		/* channel to use for console */
-#define CONFIG_SYS_INIT_CHAN1
-#define CONFIG_SYS_INIT_CHAN2
-
-#define SRAM_BASE		CONFIG_SYS_DEV0_SPACE
-#define SRAM_SIZE		0x00100000		/* 1 MB of sram */
-
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *-----------------------------------------------------------------------
- */
-
-#define PCI_HOST_ADAPTER 0		/* configure ar pci adapter	*/
-#define PCI_HOST_FORCE	1		/* configure as pci host	*/
-#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/
-
-#define CONFIG_PCI			/* include pci support		*/
-#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/
-#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
-#define CONFIG_EEPRO100			/* ronen - Support for Intel 82557/82559/82559ER chips */
-
-/* PCI MEMORY MAP section */
-#define CONFIG_SYS_PCI0_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI0_MEM_SIZE	_128M
-#define CONFIG_SYS_PCI1_MEM_BASE	0x88000000
-#define CONFIG_SYS_PCI1_MEM_SIZE	_128M
-
-#define CONFIG_SYS_PCI0_0_MEM_SPACE	(CONFIG_SYS_PCI0_MEM_BASE)
-#define CONFIG_SYS_PCI1_0_MEM_SPACE	(CONFIG_SYS_PCI1_MEM_BASE)
-
-/* PCI I/O MAP section */
-#define CONFIG_SYS_PCI0_IO_BASE	0xfa000000
-#define CONFIG_SYS_PCI0_IO_SIZE	_16M
-#define CONFIG_SYS_PCI1_IO_BASE	0xfb000000
-#define CONFIG_SYS_PCI1_IO_SIZE	_16M
-
-#define CONFIG_SYS_PCI0_IO_SPACE	(CONFIG_SYS_PCI0_IO_BASE)
-#define CONFIG_SYS_PCI0_IO_SPACE_PCI	(CONFIG_SYS_PCI0_IO_BASE) /* ronen we want phy=bus 0x00000000 */
-#define CONFIG_SYS_PCI1_IO_SPACE	(CONFIG_SYS_PCI1_IO_BASE)
-#define CONFIG_SYS_PCI1_IO_SPACE_PCI	(CONFIG_SYS_PCI1_IO_BASE) /* ronen we want phy=bus 0x00000000 */
-
-#if defined (CONFIG_750CX)
-#define CONFIG_SYS_PCI_IDSEL 0x0
-#else
-#define CONFIG_SYS_PCI_IDSEL 0x30
-#endif
-/*----------------------------------------------------------------------
- * Initial BAT mappings
- */
-
-/* NOTES:
- * 1) GUARDED and WRITE_THRU not allowed in IBATS
- * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
- */
-
-/* SDRAM */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-
-/* init ram */
-#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
-
-/* PCI0, PCI1 in one BAT */
-#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
-#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
-#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* GT regs, bootrom, all the devices, PCI I/O */
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-/* I2C addresses for the two DIMM SPD chips */
-#define DIMM0_I2C_ADDR	0x56
-#define DIMM1_I2C_ADDR	0x54
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip */
-
-#define CONFIG_SYS_EXTRA_FLASH_DEVICE	DEVICE3 /* extra flash at device 3 */
-#define CONFIG_SYS_EXTRA_FLASH_WIDTH	4	/* 32 bit */
-#define CONFIG_SYS_BOOT_FLASH_WIDTH	1	/* 8 bit */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	500	/* Timeout for Flash Lock (in ms) */
-#define CONFIG_SYS_FLASH_CFI		1
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SIZE		0x1000	/* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE	0x10000
-#define CONFIG_ENV_ADDR	      0xFFF78000 /* Marvell 8-Bit Bootflash last sector */
-/* #define CONFIG_ENV_ADDR	   (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * L2CR setup -- make sure this is right for your board!
- * look in include/mpc74xx.h for the defines used here
- */
-
-#define CONFIG_SYS_L2
-
-
-#if defined (CONFIG_750CX) || defined (CONFIG_750FX)
-#define L2_INIT 0
-#else
-
-#define L2_INIT		0
-/*
-#define L2_INIT		(L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
-			L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-*/
-#endif
-
-#define L2_ENABLE	(L2_INIT | L2CR_L2E)
-
-#define CONFIG_SYS_BOARD_ASM_INIT	1
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h
deleted file mode 100644
index a210e293a9..0000000000
--- a/include/configs/p3mx.h
+++ /dev/null
@@ -1,434 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Based on original work by
- *      Roel Loeffen, (C) Copyright 2006 Prodrive B.V.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/************************************************************************
- * p3mx.h - configuration for Prodrive P3M750 & P3M7448 boards
- *
- * The defines:
- * CONFIG_P3M750 or
- * CONFIG_P3M7448
- * are written into include/config.h by the "make xxx_config" command
- ***********************************************************************/
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*-----------------------------------------------------------------------
- * High Level Configuration Options
- *----------------------------------------------------------------------*/
-#define CONFIG_P3Mx			/* used for both board versions	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xfff00000
-
-#if defined (CONFIG_P3M750)
-#define CONFIG_750FX			/* 750GL/GX/FX			*/
-#define CONFIG_HIGH_BATS		/* High BATs supported		*/
-#define CONFIG_SYS_BOARD_NAME		"P3M750"
-#define CONFIG_SYS_BUS_CLK		100000000
-#define CONFIG_SYS_TCLK		100000000
-#elif defined (CONFIG_P3M7448)
-#define CONFIG_74xx
-#define CONFIG_SYS_BOARD_NAME		"P3M7448"
-#define CONFIG_SYS_BUS_CLK		133333333
-#define CONFIG_SYS_TCLK		133333333
-#endif
-#define CONFIG_SYS_GT_DUAL_CPU			/* also for JTAG even with one cpu */
-
-/* which initialization functions to call for this board */
-#define CONFIG_SYS_BOARD_ASM_INIT	1
-#define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_early_init_f	*/
-#define CONFIG_MISC_INIT_R      1	/* Call misc_init_r()		*/
-
-/*-----------------------------------------------------------------------
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#ifdef CONFIG_P3M750
-#define CONFIG_SYS_SDRAM1_BASE		0x10000000	/* each 256 MByte	*/
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#if defined (CONFIG_P3M750)
-#define CONFIG_SYS_FLASH_BASE		0xff800000	/* start of flash banks	*/
-#define CONFIG_SYS_BOOT_SIZE		_8M		/* boot flash		*/
-#elif defined (CONFIG_P3M7448)
-#define CONFIG_SYS_FLASH_BASE		0xff000000	/* start of flash banks	*/
-#define CONFIG_SYS_BOOT_SIZE		_16M		/* boot flash		*/
-#endif
-#define CONFIG_SYS_BOOT_SPACE		CONFIG_SYS_FLASH_BASE	/* BOOT_CS0 flash 0    */
-#define CONFIG_SYS_MONITOR_BASE	0xfff00000
-#define CONFIG_SYS_RESET_ADDRESS	0xfff00100
-#define CONFIG_SYS_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
-#define CONFIG_SYS_MISC_REGION_BASE	0xf0000000
-
-#define CONFIG_SYS_DFL_GT_REGS		0xf1000000	/* boot time GT_REGS */
-#define CONFIG_SYS_GT_REGS		0xf1000000	/* GT Registers are mapped here */
-#define CONFIG_SYS_INT_SRAM_BASE	0x42000000	/* GT offers 256k internal SRAM */
-
-/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer (placed in internal SRAM)
- *----------------------------------------------------------------------*/
- /*
- * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
- * To an unused memory region. The stack will remain in cache until RAM
- * is initialized
-*/
-#undef	CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR	0x42000000
-#define CONFIG_SYS_INIT_RAM_SIZE	0x1000
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-
-/*-----------------------------------------------------------------------
- * Serial Port
- *----------------------------------------------------------------------*/
-#define CONFIG_MPSC			/* MV64460 Serial		*/
-#define CONFIG_MPSC_PORT	0
-#define CONFIG_BAUDRATE		115200	/* console baudrate		*/
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-/*-----------------------------------------------------------------------
- * Ethernet
- *----------------------------------------------------------------------*/
-/* Change the default ethernet port, use this define (options: 0, 1, 2) */
-#define CONFIG_SYS_ETH_PORT		ETH_0
-#define MV_ETH_DEVS		2
-#define CONFIG_PHY_RESET        1	/* reset phy upon startup         */
-#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
-
-/*-----------------------------------------------------------------------
- * FLASH related
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible		*/
-#define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver		*/
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protection	*/
-#define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-
-#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
-#if defined (CONFIG_P3M750)
-#define CONFIG_ENV_SECT_SIZE	0x20000	/* one sector (1 device)		*/
-#elif defined (CONFIG_P3M7448)
-#define CONFIG_ENV_SECT_SIZE	0x40000	/* two sectors (2 devices parallel	*/
-#endif
-#define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-
-/*-----------------------------------------------------------------------
- * DDR SDRAM
- *----------------------------------------------------------------------*/
-#define CONFIG_MV64460_ECC
-
-/*-----------------------------------------------------------------------
- * I2C
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_I2C_SPEED		100000		/* I2C speed default	*/
-
-/* I2C RTC */
-#define CONFIG_RTC_M41T11	1
-#define CONFIG_SYS_I2C_RTC_ADDR	0x68
-#define CONFIG_SYS_M41T11_BASE_YEAR	1900	/* play along with linux	*/
-
-/*-----------------------------------------------------------------------
- * PCI stuff
- *----------------------------------------------------------------------*/
-#define PCI_HOST_ADAPTER 0		/* configure ar pci adapter	*/
-#define PCI_HOST_FORCE	1		/* configure as pci host	*/
-#define PCI_HOST_AUTO	2		/* detected via arbiter enable	*/
-
-#undef CONFIG_PCI			/* include pci support		*/
-#ifdef CONFIG_PCI
-#define CONFIG_PCI_HOST PCI_HOST_FORCE	/* select pci host function	*/
-#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
-#define CONFIG_PCI_SCAN_SHOW		/* show devices on bus		*/
-#endif /* CONFIG_PCI */
-
-/* PCI MEMORY MAP section */
-#define CONFIG_SYS_PCI0_MEM_BASE	0x80000000
-#define CONFIG_SYS_PCI0_MEM_SIZE	_128M
-#define CONFIG_SYS_PCI1_MEM_BASE	0x88000000
-#define CONFIG_SYS_PCI1_MEM_SIZE	_128M
-
-#define CONFIG_SYS_PCI0_0_MEM_SPACE	(CONFIG_SYS_PCI0_MEM_BASE)
-#define CONFIG_SYS_PCI1_0_MEM_SPACE	(CONFIG_SYS_PCI1_MEM_BASE)
-
-/* PCI I/O MAP section */
-#define CONFIG_SYS_PCI0_IO_BASE	0xfa000000
-#define CONFIG_SYS_PCI0_IO_SIZE	_16M
-#define CONFIG_SYS_PCI1_IO_BASE	0xfb000000
-#define CONFIG_SYS_PCI1_IO_SIZE	_16M
-
-#define CONFIG_SYS_PCI0_IO_SPACE	(CONFIG_SYS_PCI0_IO_BASE)
-#define CONFIG_SYS_PCI0_IO_SPACE_PCI	0x00000000
-#define CONFIG_SYS_PCI1_IO_SPACE	(CONFIG_SYS_PCI1_IO_BASE)
-#define CONFIG_SYS_PCI1_IO_SPACE_PCI	0x00000000
-
-#define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE)
-#define CONFIG_SYS_PCI_IDSEL 0x30
-
-#undef	CONFIG_BOOTARGS
-#define	CONFIG_EXTRA_ENV_SETTINGS_COMMON				\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
-	"flash_nfs=run nfsargs addip addtty;"				\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip addtty;"				\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-		"bootm\0"						\
-	"rootpath=/opt/eldk/ppc_6xx\0"					\
-	"u-boot=p3mx/u-boot/u-boot.bin\0"				\
-	"load=tftp 100000 ${u-boot}\0"					\
-	"update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;"	\
-		"cp.b 100000 fff00000 40000;"			        \
-		"setenv filesize;saveenv\0"				\
-	"upd=run load update\0"						\
-	"serverip=11.0.0.152\0"
-
-#if defined (CONFIG_P3M750)
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	CONFIG_EXTRA_ENV_SETTINGS_COMMON				\
-	"hostname=p3m750\0"						\
-	"bootfile=/tftpboot/p3mx/vxWorks.st\0"				\
-	"kernel_addr=fc000000\0"					\
-	"ramdisk_addr=fc180000\0"					\
-	"vxfile=p3m750/vxWorks\0"					\
-	"vxuser=ddg\0"							\
-	"vxpass=ddg\0"							\
-	"vxtarget=target\0"						\
-	"vxflags=0x8\0"							\
-	"vxargs=setenv bootargs mgi(0,0)host:${vxfile} h=${serverip} "	\
-		"e=${ipaddr} u=${vxuser} pw=${vxpass} tn=${vxtarget} "	\
-		"f=${vxflags}\0"
-#elif defined (CONFIG_P3M7448)
-#define CONFIG_EXTRA_ENV_SETTINGS					\
-	CONFIG_EXTRA_ENV_SETTINGS_COMMON				\
-	"hostname=p3m7448\0"
-#endif
-
-#if defined (CONFIG_P3M750)
-#define CONFIG_BOOTCOMMAND	"tftp;run vxargs;bootvx"
-#elif defined (CONFIG_P3M7448)
-#define CONFIG_BOOTCOMMAND	" "
-#endif
-
-#define CONFIG_BOOTDELAY	3	/* autoboot after 5 seconds */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_SDRAM
-
-
-/*-----------------------------------------------------------------------
- * Miscellaneous configurable options
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_HUSH_PARSER
-
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	        1024	/* Console I/O Buffer Size	*/
-#else
-#define CONFIG_SYS_CBSIZE	        256	/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	        16	/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	        CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000 /* memtest works on	        */
-#define CONFIG_SYS_MEMTEST_END		0x0C00000 /* 4 ... 12 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x08000000	/* default load address */
-
-#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
-#define CONFIG_LOOPW            1       /* enable loopw command         */
-#define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
-
-/*-----------------------------------------------------------------------
- * Marvell MV64460 config settings
- *----------------------------------------------------------------------*/
-/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected device width */
-#if defined (CONFIG_P3M750)
-#define CONFIG_SYS_BOOT_PAR		0x8FDFF87F	/* 16 bit flash, disable burst*/
-#elif defined (CONFIG_P3M7448)
-#define CONFIG_SYS_BOOT_PAR		0x8FEFFFFF	/* 32 bit flash, burst enabled */
-#endif
-
-/*
- * MPP[0]	Serial Port 0 TxD	TxD	OUT	Connected to P14 (buffered)
- * MPP[1]	Serial Port 0 RxD	RxD	IN	Connected to P14 (buffered)
- * MPP[2]	NC
- * MPP[3]	Serial Port 1 TxD	TxD	OUT	Connected to P14 (buffered)
- * MPP[4]	PCI Monarch#		GPIO	IN	Connected to P12
- * MPP[5]	Serial Port 1 RxD	RxD	IN	Connected to P14 (buffered)
- * MPP[6]	PMC Carrier Interrupt 0	Int	IN	Connected to P14
- * MPP[7]	PMC Carrier Interrupt 1	Int	IN	Connected to P14
- * MPP[8]	Reserved				Do not use
- * MPP[9]	Reserved				Do not use
- * MPP[10]	Reserved				Do not use
- * MPP[11]	Reserved				Do not use
- * MPP[12]	Phy 0 Interrupt		Int	IN
- * MPP[13]	Phy 1 Interrupt		Int	IN
- * MPP[14]	NC
- * MPP[15]	NC
- * MPP[16]	PCI Interrupt C		Int	IN	Connected to P11
- * MPP[17]	PCI Interrupt D		Int	IN	Connected to P11
- * MPP[18]	Watchdog NMI#		GPIO	IN	Connected to MPP[24]
- * MPP[19]	Watchdog Expired#	WDE	OUT	Connected to rst logic
- * MPP[20]	Watchdog Status		WD_STS	IN	Read back of rst by watchdog
- * MPP[21]	NC
- * MPP[22]	GP LED Green		GPIO	OUT
- * MPP[23]	GP LED Red		GPIO	OUT
- * MPP[24]	Watchdog NMI#		Int	OUT
- * MPP[25]	NC
- * MPP[26]	NC
- * MPP[27]	PCI Interrupt A		Int	IN	Connected to P11
- * MPP[28]	NC
- * MPP[29]	PCI Interrupt B		Int	IN	Connected to P11
- * MPP[30]	Module reset		GPIO	OUT	Board reset
- * MPP[31]	PCI EReady		GPIO	IN	Connected to P12
- */
-#define CONFIG_SYS_MPP_CONTROL_0	0x00303022
-#define CONFIG_SYS_MPP_CONTROL_1	0x00000000
-#define CONFIG_SYS_MPP_CONTROL_2	0x00004000
-#define CONFIG_SYS_MPP_CONTROL_3	0x00000004
-#define CONFIG_SYS_GPP_LEVEL_CONTROL	0x280730D0
-
-/*----------------------------------------------------------------------
- * Initial BAT mappings
- */
-
-/* NOTES:
- * 1) GUARDED and WRITE_THRU not allowed in IBATS
- * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
- */
-/* SDRAM */
-#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
-
-/* init ram */
-#define CONFIG_SYS_IBAT1L  (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT1U  (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
-
-/* PCI0, PCI1 in one BAT */
-#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
-#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
-#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-/* GT regs, bootrom, all the devices, PCI I/O */
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
-#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
-#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
-
-#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
-
-/* set rest out of range for Linux !!!!!!!!!!! */
-
-/* IBAT5 and DBAT5 */
-#define CONFIG_SYS_IBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT5U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
-
-/* IBAT6 and DBAT6 */
-#define CONFIG_SYS_IBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT6U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
-
-/* IBAT7 and DBAT7 */
-#define CONFIG_SYS_IBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT7U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_DBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8<<20) /* Initial Memory map for Linux */
-#define CONFIG_SYS_VXWORKS_MAC_PTR	0x42010000 /* use some memory in SRAM that's not used!!! */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * L2CR setup -- make sure this is right for your board!
- * look in include/mpc74xx.h for the defines used here
- */
-#define CONFIG_SYS_L2
-
-#if defined (CONFIG_750CX) || defined (CONFIG_750FX)
-#define L2_INIT 0
-#else
-#define L2_INIT		(L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
-			L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
-#endif
-
-#define L2_ENABLE	(L2_INIT | L2CR_L2E)
-
-#ifndef __ASSEMBLY__
-#include <../board/Marvell/include/core.h>
-#endif
-
-#endif	/* __CONFIG_H */