summaryrefslogtreecommitdiffstats
path: root/include/pcmcia/yenta.h
diff options
context:
space:
mode:
authorwdenk <wdenk>2003-05-18 11:30:09 +0000
committerwdenk <wdenk>2003-05-18 11:30:09 +0000
commit66fd3d1ce732d9168d6a056986231ada8dfa500e (patch)
tree4b0d3f9094ef6525c631baf01268d21317496e81 /include/pcmcia/yenta.h
parent45219c46605f9b933ab454738ee4ce543d5b70d6 (diff)
downloadblackbird-obmc-uboot-66fd3d1ce732d9168d6a056986231ada8dfa500e.tar.gz
blackbird-obmc-uboot-66fd3d1ce732d9168d6a056986231ada8dfa500e.zip
Add support for CompactFlash on ATC board
(includes support for Intel 82365 and compatible PC Card controllers, and Yenta-compatible PCI-to-CardBus controllers)
Diffstat (limited to 'include/pcmcia/yenta.h')
-rw-r--r--include/pcmcia/yenta.h156
1 files changed, 156 insertions, 0 deletions
diff --git a/include/pcmcia/yenta.h b/include/pcmcia/yenta.h
new file mode 100644
index 0000000000..525d8ecc82
--- /dev/null
+++ b/include/pcmcia/yenta.h
@@ -0,0 +1,156 @@
+/*
+ * yenta.h 1.20 2001/08/24 12:15:34
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ * are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use
+ * your version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#ifndef _LINUX_YENTA_H
+#define _LINUX_YENTA_H
+
+/* PCI Configuration Registers */
+
+#define PCI_STATUS_CAPLIST 0x10
+#define PCI_CB_CAPABILITY_POINTER 0x14 /* 8 bit */
+#define PCI_CAPABILITY_ID 0x00 /* 8 bit */
+#define PCI_CAPABILITY_PM 0x01
+#define PCI_NEXT_CAPABILITY 0x01 /* 8 bit */
+#define PCI_PM_CAPABILITIES 0x02 /* 16 bit */
+#define PCI_PMCAP_PME_D3COLD 0x8000
+#define PCI_PMCAP_PME_D3HOT 0x4000
+#define PCI_PMCAP_PME_D2 0x2000
+#define PCI_PMCAP_PME_D1 0x1000
+#define PCI_PMCAP_PME_D0 0x0800
+#define PCI_PMCAP_D2_CAP 0x0400
+#define PCI_PMCAP_D1_CAP 0x0200
+#define PCI_PMCAP_DYN_DATA 0x0100
+#define PCI_PMCAP_DSI 0x0020
+#define PCI_PMCAP_AUX_PWR 0x0010
+#define PCI_PMCAP_PMECLK 0x0008
+#define PCI_PMCAP_VERSION_MASK 0x0007
+#define PCI_PM_CONTROL_STATUS 0x04 /* 16 bit */
+#define PCI_PMCS_PME_STATUS 0x8000
+#define PCI_PMCS_DATASCALE_MASK 0x6000
+#define PCI_PMCS_DATASCALE_SHIFT 13
+#define PCI_PMCS_DATASEL_MASK 0x1e00
+#define PCI_PMCS_DATASEL_SHIFT 9
+#define PCI_PMCS_PME_ENABLE 0x0100
+#define PCI_PMCS_PWR_STATE_MASK 0x0003
+#define PCI_PMCS_PWR_STATE_D0 0x0000
+#define PCI_PMCS_PWR_STATE_D1 0x0001
+#define PCI_PMCS_PWR_STATE_D2 0x0002
+#define PCI_PMCS_PWR_STATE_D3 0x0003
+#define PCI_PM_BRIDGE_EXT 0x06 /* 8 bit */
+#define PCI_PM_DATA 0x07 /* 8 bit */
+
+#define CB_PRIMARY_BUS 0x18 /* 8 bit */
+#define CB_CARDBUS_BUS 0x19 /* 8 bit */
+#define CB_SUBORD_BUS 0x1a /* 8 bit */
+#define CB_LATENCY_TIMER 0x1b /* 8 bit */
+
+#define CB_MEM_BASE(m) (0x1c + 8*(m))
+#define CB_MEM_LIMIT(m) (0x20 + 8*(m))
+#define CB_IO_BASE(m) (0x2c + 8*(m))
+#define CB_IO_LIMIT(m) (0x30 + 8*(m))
+
+#define CB_BRIDGE_CONTROL 0x3e /* 16 bit */
+#define CB_BCR_PARITY_ENA 0x0001
+#define CB_BCR_SERR_ENA 0x0002
+#define CB_BCR_ISA_ENA 0x0004
+#define CB_BCR_VGA_ENA 0x0008
+#define CB_BCR_MABORT 0x0020
+#define CB_BCR_CB_RESET 0x0040
+#define CB_BCR_ISA_IRQ 0x0080
+#define CB_BCR_PREFETCH(m) (0x0100 << (m))
+#define CB_BCR_WRITE_POST 0x0400
+
+#define CB_LEGACY_MODE_BASE 0x44
+
+/* Memory mapped registers */
+
+#define CB_SOCKET_EVENT 0x0000
+#define CB_SE_CSTSCHG 0x00000001
+#define CB_SE_CCD 0x00000006
+#define CB_SE_CCD1 0x00000002
+#define CB_SE_CCD2 0x00000004
+#define CB_SE_PWRCYCLE 0x00000008
+
+#define CB_SOCKET_MASK 0x0004
+#define CB_SM_CSTSCHG 0x00000001
+#define CB_SM_CCD 0x00000006
+#define CB_SM_PWRCYCLE 0x00000008
+
+#define CB_SOCKET_STATE 0x0008
+#define CB_SS_CSTSCHG 0x00000001
+#define CB_SS_CCD 0x00000006
+#define CB_SS_CCD1 0x00000002
+#define CB_SS_CCD2 0x00000004
+#define CB_SS_PWRCYCLE 0x00000008
+#define CB_SS_16BIT 0x00000010
+#define CB_SS_32BIT 0x00000020
+#define CB_SS_CINT 0x00000040
+#define CB_SS_BADCARD 0x00000080
+#define CB_SS_DATALOST 0x00000100
+#define CB_SS_BADVCC 0x00000200
+#define CB_SS_5VCARD 0x00000400
+#define CB_SS_3VCARD 0x00000800
+#define CB_SS_XVCARD 0x00001000
+#define CB_SS_YVCARD 0x00002000
+#define CB_SS_VSENSE 0x00003c86
+#define CB_SS_5VSOCKET 0x10000000
+#define CB_SS_3VSOCKET 0x20000000
+#define CB_SS_XVSOCKET 0x40000000
+#define CB_SS_YVSOCKET 0x80000000
+
+#define CB_SOCKET_FORCE 0x000c
+#define CB_SF_CVSTEST 0x00004000
+
+#define CB_SOCKET_CONTROL 0x0010
+#define CB_SC_VPP_MASK 0x00000007
+#define CB_SC_VPP_OFF 0x00000000
+#define CB_SC_VPP_12V 0x00000001
+#define CB_SC_VPP_5V 0x00000002
+#define CB_SC_VPP_3V 0x00000003
+#define CB_SC_VPP_XV 0x00000004
+#define CB_SC_VPP_YV 0x00000005
+#define CB_SC_VCC_MASK 0x00000070
+#define CB_SC_VCC_OFF 0x00000000
+#define CB_SC_VCC_5V 0x00000020
+#define CB_SC_VCC_3V 0x00000030
+#define CB_SC_VCC_XV 0x00000040
+#define CB_SC_VCC_YV 0x00000050
+#define CB_SC_CCLK_STOP 0x00000080
+
+#define CB_SOCKET_POWER 0x0020
+#define CB_SP_CLK_CTRL 0x00000001
+#define CB_SP_CLK_CTRL_ENA 0x00010000
+#define CB_SP_CLK_MODE 0x01000000
+#define CB_SP_ACCESS 0x02000000
+
+/* Address bits 31..24 for memory windows for 16-bit cards,
+ accessable only by memory mapping the 16-bit register set */
+#define CB_MEM_PAGE(map) (0x40 + (map))
+
+#endif /* _LINUX_YENTA_H */
OpenPOWER on IntegriCloud