Patches by Murray Jensen, 17 Jun 2003:

- Hymod board database mods: add "who" field and new xilinx chip types
- provide new "init_cmd_timeout()" function so code external to
  "common/main.c" can use the "reset_cmd_timeout()" function before
  entering the main loop
- add DTT support for adm1021 (new file dtt/adm1021.c; config
  slightly different. see include/configs/hymod.h for an example
  (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
  CFG_DTT_ADM1021 defined)
- add new "eeprom_probe()" function which has similar args and
  behaves in a similar way to "eeprom_read()" etc.
- add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
  function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
- gdbtools copyright update
- ensure that set_msr() executes the "sync" and "isync" instructions
  after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
- 8260 I/O ports fix: Open Drain should be set last when configuring
- add SIU IRQ defines for 8260
- allow LDSCRIPT override and OBJCFLAGS initialization: change to
  config.mk to allow board configurations to override the GNU
  linker script, selected via the LDSCRIPT, make variable, and to
  give an initial value to the OBJCFLAGS make variable
- 8260 i2c enhancement:
  o correctly extends the timeout depending on the size of all
    queued messages for both transmit and receive
  o will not continue with receive if transmit times out
  o ensures that the error callback is done for all queued tx
    and rx messages
  o correctly detects both tx and rx timeouts, only delivers one to
    the callback, and does not overwrite an earlier error
  o logic in i2c_probe now correct
- add "vprintf()" function so that "panic()" function can be
  technically correct
- many Hymod board changes

1 files changed, 39 insertions, 1 deletions

diff --git a/include/dtt.h b/include/dtt.h
index f3d95ff77a..a17aa67703 100644
--- a/include/dtt.h
+++ b/include/dtt.h
@@ -27,9 +27,13 @@
 #ifndef _DTT_H_
 #define _DTT_H_
 
-#if defined(CONFIG_DTT_LM75) || defined(CONFIG_DTT_DS1621)
+#if defined(CONFIG_DTT_LM75) || \
+    defined(CONFIG_DTT_DS1621) || \
+    defined(CONFIG_DTT_ADM1021)
+
 #define CONFIG_DTT				/* We have a DTT */
 
+#ifndef CONFIG_DTT_ADM1021
 #define DTT_COMMERCIAL_MAX_TEMP	70		/* 0 - +70 C */
 #define DTT_INDUSTRIAL_MAX_TEMP	85		/* -40 - +85 C */
 #define DTT_AUTOMOTIVE_MAX_TEMP	105		/* -40 - +105 C */
@@ -39,6 +43,7 @@
 #ifndef CFG_DTT_HYSTERESIS
 #define CFG_DTT_HYSTERESIS	5		/* 5 C */
 #endif
+#endif /* CONFIG_DTT_ADM1021 */
 
 extern int dtt_init (void);
 extern int dtt_read(int sensor, int reg);
@@ -64,4 +69,37 @@ extern int dtt_get_temp(int sensor);
 #define DTT_CONFIG		0xAC
 #endif
 
+#if defined(CONFIG_DTT_ADM1021)
+#define DTT_READ_LOC_VALUE	0x00
+#define DTT_READ_REM_VALUE	0x01
+#define DTT_READ_STATUS		0x02
+#define DTT_READ_CONFIG		0x03
+#define DTT_READ_CONVRATE	0x04
+#define DTT_READ_LOC_HIGHLIM	0x05
+#define DTT_READ_LOC_LOWLIM	0x06
+#define DTT_READ_REM_HIGHLIM	0x07
+#define DTT_READ_REM_LOWLIM	0x08
+#define DTT_READ_DEVID		0xfe
+
+#define DTT_WRITE_CONFIG	0x09
+#define DTT_WRITE_CONVRATE	0x0a
+#define DTT_WRITE_LOC_HIGHLIM	0x0b
+#define DTT_WRITE_LOC_LOWLIM	0x0c
+#define DTT_WRITE_REM_HIGHLIM	0x0d
+#define DTT_WRITE_REM_LOWLIM	0x0e
+#define DTT_WRITE_ONESHOT	0x0f
+
+#define DTT_STATUS_BUSY		0x80	/* 1=ADC Converting */
+#define DTT_STATUS_LHIGH	0x40	/* 1=Local High Temp Limit Tripped */
+#define DTT_STATUS_LLOW		0x20	/* 1=Local Low Temp Limit Tripped */
+#define DTT_STATUS_RHIGH	0x10	/* 1=Remote High Temp Limit Tripped */
+#define DTT_STATUS_RLOW		0x08	/* 1=Remote Low Temp Limit Tripped */
+#define DTT_STATUS_OPEN		0x04	/* 1=Remote Sensor Open-Circuit */
+
+#define DTT_CONFIG_ALERT_MASKED	0x80	/* 0=ALERT Enabled, 1=ALERT Masked */
+#define DTT_CONFIG_STANDBY	0x40	/* 0=Run, 1=Standby */
+
+#define DTT_ADM1021_DEVID	0x41
+#endif
+
 #endif /* _DTT_H_ */