diff options
| author | Przemyslaw Marczak <p.marczak@samsung.com> | 2015-05-13 13:38:35 +0200 |
|---|---|---|
| committer | Simon Glass <sjg@chromium.org> | 2015-05-14 19:59:21 -0600 |
| commit | 9038cd531382e94cc6d4daa9e81f70491030aa38 (patch) | |
| tree | 3c289ecd2fe8dede9341096f161ee69013cfc186 /include/dt-bindings | |
| parent | f64000c302f78103cb704e9843ab0c9ae1629bf1 (diff) | |
| download | blackbird-obmc-uboot-9038cd531382e94cc6d4daa9e81f70491030aa38.tar.gz blackbird-obmc-uboot-9038cd531382e94cc6d4daa9e81f70491030aa38.zip | |
sandbox: dts: add sandbox_pmic.dtsi and include it to sandbox.dts and test.dts
This commit adds dtsi file for Sandbox PMIC.
It fully describes the PMIC by:
- i2c emul node - with a default settings of 16 registers
- 2x buck regulator nodes
- 2x ldo regulator nodes
The default register settings are set with preprocessor macros:
- VAL2REG(min[uV/uA], step[uV/uA], val[uV/uA])
- VAL2OMREG(mode id)
Both defined in file:
- include/dt-bindings/pmic/sandbox_pmic.h
The Voltage ranges of each regulator can be found in:
- include/power/sandbox_pmic.h
The new file is included into:
- sandbox.dts
- test.dts
Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested on sandbox:
Tested-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'include/dt-bindings')
| -rw-r--r-- | include/dt-bindings/pmic/sandbox_pmic.h | 35 |
1 files changed, 35 insertions, 0 deletions
diff --git a/include/dt-bindings/pmic/sandbox_pmic.h b/include/dt-bindings/pmic/sandbox_pmic.h new file mode 100644 index 0000000000..c3d839bf01 --- /dev/null +++ b/include/dt-bindings/pmic/sandbox_pmic.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2015 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _DT_BINDINGS_SANDBOX_PMIC_H_ +#define _DT_BINDINGS_SANDBOX_PMIC_H_ + +/* + * Sandbox PMIC - prepare reset values + * To provide the default (reset) values as in the real hardware, + * the registers are set in i2c pmic emul driver's probe() method. + * The default values are defined as below. + */ + +/* Buck operation mode IDs */ +#define BUCK_OM_OFF 0 +#define BUCK_OM_ON 1 +#define BUCK_OM_PWM 2 +#define BUCK_OM_COUNT 3 + +/* Ldo operation mode IDs */ +#define LDO_OM_OFF 0 +#define LDO_OM_ON 1 +#define LDO_OM_SLEEP 2 +#define LDO_OM_STANDBY 3 +#define LDO_OM_COUNT 4 + +/* [Value uV/uA]/[Mode ID] to register */ +#define VAL2REG(min, step, val) (((val) - (min)) / (step)) +#define VAL2OMREG(x) (x) + +#endif |
