powerpc: mpc8260ads: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

1 files changed, 0 insertions, 549 deletions

diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
deleted file mode 100644
index 39f7564b74..0000000000
--- a/include/configs/MPC8260ADS.h
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stuart Hughes <stuarth@lineo.com>
- * This file is based on similar values for other boards found in other
- * U-Boot config files, and some that I found in the mpc8260ads manual.
- *
- * Note: my board is a PILOT rev.
- * Note: the mpc8260ads doesn't come with a proper Ethernet MAC address.
- *
- * (C) Copyright 2003-2004 Arabella Software Ltd.
- * Yuli Barcohen <yuli@arabellasw.com>
- * Added support for SDRAM DIMMs SPD EEPROM, MII, JFFS2.
- * Ported to PQ2FADS-ZU and PQ2FADS-VR boards.
- * Ported to MPC8272ADS board.
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- * Added support for PCI bridge on MPC8272ADS
- *
- * Copyright (C) Freescale Semiconductor, Inc. 2006-2009.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8260ADS	1	/* Motorola PQ2 ADS family board */
-
-#ifndef CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_TEXT_BASE	0xFFF00000	/* Standard: boot high */
-#endif
-
-#define CONFIG_CPM2		1	/* Has a CPM2 */
-
-/*
- * Figure out if we are booting low via flash HRCW or high via the BCSR.
- */
-#if (CONFIG_SYS_TEXT_BASE != 0xFFF00000)		/* Boot low (flash HRCW) */
-#   define CONFIG_SYS_LOWBOOT		1
-#endif
-
-/* ADS flavours */
-#define CONFIG_SYS_8260ADS		1	/* MPC8260ADS */
-#define CONFIG_SYS_8266ADS		2	/* MPC8266ADS */
-#define CONFIG_SYS_PQ2FADS		3	/* PQ2FADS-ZU or PQ2FADS-VR */
-#define CONFIG_SYS_8272ADS		4	/* MPC8272ADS */
-
-#ifndef CONFIG_ADSTYPE
-#define CONFIG_ADSTYPE		CONFIG_SYS_8260ADS
-#endif /* CONFIG_ADSTYPE */
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_MPC8272		1
-#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
-/*
- * Actually MPC8275, but the code is littered with ifdefs that
- * apply to both, or which use this ifdef to assume board-specific
- * details. :-(
- */
-#define CONFIG_MPC8272		1
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
-
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
-#define CONFIG_RESET_PHY_R	1	/* Call reset_phy()		*/
-
-/* allow serial and ethaddr to be overwritten */
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * if CONFIG_CONS_NONE is defined, then the serial console routines must
- * defined elsewhere (for example, on the cogent platform, there are serial
- * ports on the motherboard which are used for the serial console - see
- * cogent/cma101/serial.[ch]).
- */
-#undef	CONFIG_CONS_ON_SMC		/* define if console on SMC */
-#define CONFIG_CONS_ON_SCC		/* define if console on SCC */
-#undef	CONFIG_CONS_NONE		/* define if console on something else */
-#define CONFIG_CONS_INDEX	1	/* which serial channel for console */
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- */
-#undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC   */
-#define CONFIG_ETHER_ON_FCC		/* define if ether on FCC   */
-#undef	CONFIG_ETHER_NONE		/* define if ether on something else */
-
-#ifdef CONFIG_ETHER_ON_FCC
-
-#define CONFIG_ETHER_INDEX	2	/* which SCC/FCC channel for ethernet */
-
-#if   CONFIG_ETHER_INDEX == 1
-
-# define CONFIG_SYS_PHY_ADDR		0
-# define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK11 | CMXFCR_TF1CS_CLK10)
-# define CONFIG_SYS_CMXFCR_MASK1	(CMXFCR_FC1 | CMXFCR_RF1CS_MSK | CMXFCR_TF1CS_MSK)
-
-#elif CONFIG_ETHER_INDEX == 2
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS	/* RxCLK is CLK15, TxCLK is CLK16 */
-# define CONFIG_SYS_PHY_ADDR		3
-# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK15 | CMXFCR_TF2CS_CLK16)
-#else					/* RxCLK is CLK13, TxCLK is CLK14 */
-# define CONFIG_SYS_PHY_ADDR		0
-# define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
-
-# define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-
-#endif	/* CONFIG_ETHER_INDEX */
-
-#define CONFIG_SYS_CPMFCR_RAMTYPE	0		/* BDs and buffers on 60x bus */
-#define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE | FCC_PSMR_LPB)  /* Full duplex */
-
-#define CONFIG_MII			/* MII PHY management		*/
-#define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
-/*
- * GPIO pins used for bit-banged MII communications
- */
-#define MDIO_PORT	2		/* Port C */
-#define MDIO_DECLARE	volatile ioport_t *iop = ioport_addr ( \
-				(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-#define MDC_DECLARE	MDIO_DECLARE
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_SYS_MDIO_PIN	0x00002000	/* PC18 */
-#define CONFIG_SYS_MDC_PIN	0x00001000	/* PC19 */
-#else
-#define CONFIG_SYS_MDIO_PIN	0x00400000	/* PC9	*/
-#define CONFIG_SYS_MDC_PIN	0x00200000	/* PC10 */
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8272ADS */
-
-#define MDIO_ACTIVE	(iop->pdir |=  CONFIG_SYS_MDIO_PIN)
-#define MDIO_TRISTATE	(iop->pdir &= ~CONFIG_SYS_MDIO_PIN)
-#define MDIO_READ	((iop->pdat &  CONFIG_SYS_MDIO_PIN) != 0)
-
-#define MDIO(bit)	if(bit) iop->pdat |=  CONFIG_SYS_MDIO_PIN; \
-			else	iop->pdat &= ~CONFIG_SYS_MDIO_PIN
-
-#define MDC(bit)	if(bit) iop->pdat |=  CONFIG_SYS_MDC_PIN; \
-			else	iop->pdat &= ~CONFIG_SYS_MDC_PIN
-
-#define MIIDELAY	udelay(1)
-
-#endif /* CONFIG_ETHER_ON_FCC */
-
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-#undef CONFIG_SPD_EEPROM	/* On new boards, SDRAM is soldered */
-#else
-#define CONFIG_HARD_I2C		1	/* To enable I2C support	*/
-#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_SPD_ADDR)
-#define CONFIG_SPD_ADDR		0x50
-#endif
-#endif /* CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS */
-
-/*PCI*/
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-#define CONFIG_PCI
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_PCI_PNP
-#define CONFIG_PCI_BOOTDELAY 0
-#define CONFIG_PCI_SCAN_SHOW
-#endif
-
-#ifndef CONFIG_SDRAM_PBI
-#define CONFIG_SDRAM_PBI	0 /* By default, use bank-based interleaving */
-#endif
-
-#ifndef CONFIG_8260_CLKIN
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-#define CONFIG_8260_CLKIN	100000000	/* in Hz */
-#else
-#define CONFIG_8260_CLKIN	66000000	/* in Hz */
-#endif
-#endif
-
-#define CONFIG_BAUDRATE		115200
-
-#define CONFIG_OF_LIBFDT	1
-#define CONFIG_OF_BOARD_SETUP	1
-#if defined(CONFIG_OF_LIBFDT)
-#define OF_TBCLK		(bd->bi_busfreq / 4)
-#endif
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-
-#undef CONFIG_CMD_XIMG
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-    #undef CONFIG_CMD_SDRAM
-    #undef CONFIG_CMD_I2C
-
-#elif CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-    #undef CONFIG_CMD_SDRAM
-    #undef CONFIG_CMD_I2C
-
-#else
-    #undef CONFIG_CMD_PCI
-
-#endif /* CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS */
-
-
-#define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND	"bootm fff80000"	/* autoboot command */
-#define CONFIG_BOOTARGS		"root=/dev/mtdblock2"
-
-#if defined(CONFIG_CMD_KGDB)
-#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
-#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX	2	/* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE	115200	/* speed to run kgdb serial port at */
-#endif
-
-#define CONFIG_BZIP2	/* include support for bzip2 compressed images */
-#undef	CONFIG_WATCHDOG /* disable platform specific watchdog */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE	256			/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16			/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x400000	/* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_FLASH_BASE		0xff800000
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks	*/
-#define CONFIG_SYS_MAX_FLASH_SECT	32	/* max num of sects on one chip */
-#define CONFIG_SYS_FLASH_SIZE		8
-#define CONFIG_SYS_FLASH_ERASE_TOUT	8000	/* Timeout for Flash Erase (in ms)    */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	5	/* Timeout for Flash Write (in ms)    */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_PROTECTION		/* "Real" (hardware) sectors protection */
-
-/*
- * JFFS2 partitions
- *
- * Note: fake mtd_id used, no linux mtd map file
- */
-#define MTDIDS_DEFAULT		"nor0=mpc8260ads-0"
-#define MTDPARTS_DEFAULT	"mtdparts=mpc8260ads-0:-@1m(jffs2)"
-#define CONFIG_SYS_JFFS2_SORT_FRAGMENTS
-
-/* this is stuff came out of the Motorola docs */
-#ifndef CONFIG_SYS_LOWBOOT
-#define CONFIG_SYS_DEFAULT_IMMR	0x0F010000
-#endif
-
-#define CONFIG_SYS_IMMR		0xF0000000
-#define CONFIG_SYS_BCSR		0xF4500000
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-#define CONFIG_SYS_PCI_INT		0xF8200000
-#endif
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_LSDRAM_BASE		0xFD000000
-
-#define RS232EN_1		0x02000002
-#define RS232EN_2		0x01000001
-#define FETHIEN1		0x08000008
-#define FETH1_RST		0x04000004
-#define FETHIEN2		0x10000000
-#define FETH2_RST		0x08000000
-#define BCSR_PCI_MODE		0x01000000
-
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x2000	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#ifdef CONFIG_SYS_LOWBOOT
-/* PQ2FADS flash HRCW = 0x0EB4B645 */
-#define CONFIG_SYS_HRCW_MASTER (   ( HRCW_BPS11 | HRCW_CIP )			    |\
-			    ( HRCW_L2CPC10 | HRCW_DPPC11 | HRCW_ISB100 )    |\
-			    ( HRCW_BMS | HRCW_MMR11 | HRCW_LBPC01 | HRCW_APPC10 ) |\
-			    ( HRCW_CS10PC01 | HRCW_MODCK_H0101 )	     \
-			)
-#else
-/* PQ2FADS BCSR HRCW = 0x0CB23645 */
-#define CONFIG_SYS_HRCW_MASTER (   ( HRCW_BPS11 | HRCW_CIP )			    |\
-			    ( HRCW_L2CPC10 | HRCW_DPPC10 | HRCW_ISB010 )    |\
-			    ( HRCW_BMS | HRCW_APPC10 )			    |\
-			    ( HRCW_MODCK_H0101 )			     \
-			)
-#endif
-/* no slaves */
-#define CONFIG_SYS_HRCW_SLAVE1 0
-#define CONFIG_SYS_HRCW_SLAVE2 0
-#define CONFIG_SYS_HRCW_SLAVE3 0
-#define CONFIG_SYS_HRCW_SLAVE4 0
-#define CONFIG_SYS_HRCW_SLAVE5 0
-#define CONFIG_SYS_HRCW_SLAVE6 0
-#define CONFIG_SYS_HRCW_SLAVE7 0
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#ifdef CONFIG_BZIP2
-#define CONFIG_SYS_MALLOC_LEN		(4096 << 10)	/* Reserve 4 MB for malloc()	*/
-#else
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 KB for malloc()	*/
-#endif /* CONFIG_BZIP2 */
-
-#ifndef CONFIG_SYS_RAMBOOT
-#  define CONFIG_ENV_IS_IN_FLASH	1
-#  define CONFIG_ENV_SECT_SIZE	0x40000
-#  define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + CONFIG_ENV_SECT_SIZE)
-#else
-#  define CONFIG_ENV_IS_IN_NVRAM	1
-#  define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-#  define CONFIG_ENV_SIZE		0x200
-#endif /* CONFIG_SYS_RAMBOOT */
-
-#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC8260 CPU */
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-#define CONFIG_SYS_HID0_INIT		0
-#define CONFIG_SYS_HID0_FINAL		(HID0_ICE | HID0_IFEM | HID0_ABE )
-
-#define CONFIG_SYS_HID2		0
-
-#define CONFIG_SYS_SYPCR		0xFFFFFFC3
-#define CONFIG_SYS_BCR			0x100C0000
-#define CONFIG_SYS_SIUMCR		0x0A200000
-#define CONFIG_SYS_SCCR		SCCR_DFBRG01
-#define CONFIG_SYS_BR0_PRELIM		(CONFIG_SYS_FLASH_BASE | 0x00001801)
-#define CONFIG_SYS_OR0_PRELIM		0xFF800876
-#define CONFIG_SYS_BR1_PRELIM		(CONFIG_SYS_BCSR | 0x00001801)
-#define CONFIG_SYS_OR1_PRELIM		0xFFFF8010
-
-/*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_SYS_BR3_PRELIM	(CONFIG_SYS_PCI_INT | 0x1801)	/* PCI interrupt controller */
-#define CONFIG_SYS_OR3_PRELIM	0xFFFF8010
-#elif CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
-#define CONFIG_SYS_BR8_PRELIM	(CONFIG_SYS_PCI_INT | 0x1801)	/* PCI interrupt controller */
-#define CONFIG_SYS_OR8_PRELIM	0xFFFF8010
-#endif
-
-#define CONFIG_SYS_RMR			RMR_CSRE
-#define CONFIG_SYS_TMCNTSC		(TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-#define CONFIG_SYS_PISCR		(PISCR_PS|PISCR_PTF|PISCR_PTE)
-#define CONFIG_SYS_RCCR		0
-
-#if (CONFIG_ADSTYPE == CONFIG_SYS_8266ADS) || (CONFIG_ADSTYPE == CONFIG_SYS_8272ADS)
-#undef CONFIG_SYS_LSDRAM_BASE		/* No local bus SDRAM on these boards */
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_8266ADS */
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
-#define CONFIG_SYS_OR2			0xFE002EC0
-#define CONFIG_SYS_PSDMR		0x824B36A3
-#define CONFIG_SYS_PSRT		0x13
-#define CONFIG_SYS_LSDMR		0x828737A3
-#define CONFIG_SYS_LSRT		0x13
-#define CONFIG_SYS_MPTPR		0x2800
-#elif CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_SYS_OR2			0xFC002CC0
-#define CONFIG_SYS_PSDMR		0x834E24A3
-#define CONFIG_SYS_PSRT		0x13
-#define CONFIG_SYS_MPTPR		0x2800
-#else
-#define CONFIG_SYS_OR2			0xFF000CA0
-#define CONFIG_SYS_PSDMR		0x016EB452
-#define CONFIG_SYS_PSRT		0x21
-#define CONFIG_SYS_LSDMR		0x0086A522
-#define CONFIG_SYS_LSRT		0x21
-#define CONFIG_SYS_MPTPR		0x1900
-#endif /* CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS */
-
-#define CONFIG_SYS_RESET_ADDRESS	0x04400000
-
-#if CONFIG_ADSTYPE >= CONFIG_SYS_PQ2FADS
-
-/* PCI Memory map (if different from default map */
-#define CONFIG_SYS_PCI_SLV_MEM_LOCAL	CONFIG_SYS_SDRAM_BASE		/* Local base */
-#define CONFIG_SYS_PCI_SLV_MEM_BUS		0x00000000		/* PCI base */
-#define CONFIG_SYS_PICMR0_MASK_ATTRIB	(PICMR_MASK_512MB | PICMR_ENABLE | \
-				 PICMR_PREFETCH_EN)
-
-/*
- * These are the windows that allow the CPU to access PCI address space.
- * All three PCI master windows, which allow the CPU to access PCI
- * prefetch, non prefetch, and IO space (see below), must all fit within
- * these windows.
- */
-
-/*
- * Master window that allows the CPU to access PCI Memory (prefetch).
- * This window will be setup with the second set of Outbound ATU registers
- * in the bridge.
- */
-
-#define CONFIG_SYS_PCI_MSTR_MEM_LOCAL	0x80000000          /* Local base */
-#define CONFIG_SYS_PCI_MSTR_MEM_BUS	0x80000000          /* PCI base   */
-#define	CONFIG_SYS_CPU_PCI_MEM_START	PCI_MSTR_MEM_LOCAL
-#define CONFIG_SYS_PCI_MSTR_MEM_SIZE	0x20000000          /* 512MB */
-#define CONFIG_SYS_POCMR0_MASK_ATTRIB	(POCMR_MASK_512MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
-
-/*
- * Master window that allows the CPU to access PCI Memory (non-prefetch).
- * This window will be setup with the second set of Outbound ATU registers
- * in the bridge.
- */
-
-#define CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL    0xA0000000          /* Local base */
-#define CONFIG_SYS_PCI_MSTR_MEMIO_BUS      0xA0000000          /* PCI base   */
-#define CONFIG_SYS_CPU_PCI_MEMIO_START     PCI_MSTR_MEMIO_LOCAL
-#define CONFIG_SYS_PCI_MSTR_MEMIO_SIZE     0x20000000          /* 512MB */
-#define CONFIG_SYS_POCMR1_MASK_ATTRIB      (POCMR_MASK_512MB | POCMR_ENABLE)
-
-/*
- * Master window that allows the CPU to access PCI IO space.
- * This window will be setup with the first set of Outbound ATU registers
- * in the bridge.
- */
-
-#define CONFIG_SYS_PCI_MSTR_IO_LOCAL       0xF6000000          /* Local base */
-#define CONFIG_SYS_PCI_MSTR_IO_BUS         0x00000000          /* PCI base   */
-#define CONFIG_SYS_CPU_PCI_IO_START        PCI_MSTR_IO_LOCAL
-#define CONFIG_SYS_PCI_MSTR_IO_SIZE        0x02000000          /* 64MB */
-#define CONFIG_SYS_POCMR2_MASK_ATTRIB      (POCMR_MASK_32MB | POCMR_ENABLE | POCMR_PCI_IO)
-
-
-/* PCIBR0 - for PCI IO*/
-#define CONFIG_SYS_PCI_MSTR0_LOCAL		CONFIG_SYS_PCI_MSTR_IO_LOCAL		/* Local base */
-#define CONFIG_SYS_PCIMSK0_MASK		~(CONFIG_SYS_PCI_MSTR_IO_SIZE - 1U)	/* Size of window */
-/* PCIBR1 - prefetch and non-prefetch regions joined together */
-#define CONFIG_SYS_PCI_MSTR1_LOCAL		CONFIG_SYS_PCI_MSTR_MEM_LOCAL
-#define CONFIG_SYS_PCIMSK1_MASK		~(CONFIG_SYS_PCI_MSTR_MEM_SIZE + CONFIG_SYS_PCI_MSTR_MEMIO_SIZE - 1U)
-
-#endif /* CONFIG_ADSTYPE == CONFIG_8272ADS*/
-
-#define CONFIG_HAS_ETH0
-
-#if CONFIG_ADSTYPE == CONFIG_SYS_8272ADS
-#define CONFIG_HAS_ETH1
-#endif
-
-#define CONFIG_NETDEV eth0
-#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"netdev=" __stringify(CONFIG_NETDEV) "\0"			\
-	"tftpflash=tftpboot $loadaddr $uboot; "				\
-		"protect off " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" +$filesize; "	\
-		"erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
-		"cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" $filesize; "	\
-		"protect on " __stringify(CONFIG_SYS_TEXT_BASE)		\
-			" +$filesize; "	\
-		"cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)	\
-			" $filesize\0"	\
-	"fdtaddr=400000\0"						\
-	"console=ttyCPM0\0"						\
-	"setbootargs=setenv bootargs "					\
-		"root=$rootdev rw console=$console,$baudrate $othbootargs\0" \
-	"setipargs=setenv bootargs nfsroot=$serverip:$rootpath "	 \
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-		"root=$rootdev rw console=$console,$baudrate $othbootargs\0"
-
-#define CONFIG_NFSBOOTCOMMAND						\
-	"setenv rootdev /dev/nfs;"					\
-	"run setipargs;"						\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr"
-
-#define CONFIG_RAMBOOTCOMMAND						\
-	"setenv rootdev /dev/ram;"					\
-	"run setbootargs;"						\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#endif /* __CONFIG_H */