Merge branch 'master' of git://git.denx.de/u-boot-blackfin

3 files changed, 361 insertions, 16 deletions

diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c
index 8d59d46c64..0f98b961fd 100644
--- a/drivers/mmc/bfin_sdh.c
+++ b/drivers/mmc/bfin_sdh.c
@@ -19,9 +19,7 @@
 #include <asm/mach-common/bits/sdh.h>
 #include <asm/mach-common/bits/dma.h>
 
-#if defined(__ADSPBF50x__) || defined(__ADSPBF51x__)
-# define bfin_read_SDH_PWR_CTL		bfin_read_RSI_PWR_CONTROL
-# define bfin_write_SDH_PWR_CTL		bfin_write_RSI_PWR_CONTROL
+#if defined(__ADSPBF50x__) || defined(__ADSPBF51x__) || defined(__ADSPBF60x__)
 # define bfin_read_SDH_CLK_CTL		bfin_read_RSI_CLK_CONTROL
 # define bfin_write_SDH_CLK_CTL		bfin_write_RSI_CLK_CONTROL
 # define bfin_write_SDH_ARGUMENT	bfin_write_RSI_ARGUMENT
@@ -38,10 +36,21 @@
 # define bfin_write_SDH_STATUS_CLR 	bfin_write_RSI_STATUSCL
 # define bfin_read_SDH_CFG		bfin_read_RSI_CONFIG
 # define bfin_write_SDH_CFG		bfin_write_RSI_CONFIG
+# if defined(__ADSPBF60x__)
+# define bfin_read_SDH_BLK_SIZE		bfin_read_RSI_BLKSZ
+# define bfin_write_SDH_BLK_SIZE	bfin_write_RSI_BLKSZ
+# define bfin_write_DMA_START_ADDR	bfin_write_DMA10_START_ADDR
+# define bfin_write_DMA_X_COUNT		bfin_write_DMA10_X_COUNT
+# define bfin_write_DMA_X_MODIFY	bfin_write_DMA10_X_MODIFY
+# define bfin_write_DMA_CONFIG		bfin_write_DMA10_CONFIG
+# else
+# define bfin_read_SDH_PWR_CTL		bfin_read_RSI_PWR_CONTROL
+# define bfin_write_SDH_PWR_CTL		bfin_write_RSI_PWR_CONTROL
 # define bfin_write_DMA_START_ADDR	bfin_write_DMA4_START_ADDR
 # define bfin_write_DMA_X_COUNT		bfin_write_DMA4_X_COUNT
 # define bfin_write_DMA_X_MODIFY	bfin_write_DMA4_X_MODIFY
 # define bfin_write_DMA_CONFIG		bfin_write_DMA4_CONFIG
+# endif
 # define PORTMUX_PINS \
 	{ P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0 }
 #elif defined(__ADSPBF54x__)
@@ -70,6 +79,9 @@ sdh_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd)
 		sdh_cmd |= CMD_RSP;
 	if (flags & MMC_RSP_136)
 		sdh_cmd |= CMD_L_RSP;
+#ifdef RSI_BLKSZ
+	sdh_cmd |= CMD_DATA0_BUSY;
+#endif
 
 	bfin_write_SDH_ARGUMENT(arg);
 	bfin_write_SDH_COMMAND(sdh_cmd);
@@ -104,6 +116,12 @@ sdh_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd)
 
 	bfin_write_SDH_STATUS_CLR(CMD_SENT_STAT | CMD_RESP_END_STAT |
 				CMD_TIMEOUT_STAT | CMD_CRC_FAIL_STAT);
+#ifdef RSI_BLKSZ
+	/* wait till card ready */
+	while (!(bfin_read_RSI_ESTAT() & SD_CARD_READY))
+		continue;
+	bfin_write_RSI_ESTAT(SD_CARD_READY);
+#endif
 
 	return ret;
 }
@@ -113,16 +131,19 @@ static int sdh_setup_data(struct mmc *mmc, struct mmc_data *data)
 {
 	u16 data_ctl = 0;
 	u16 dma_cfg = 0;
-	int ret = 0;
 	unsigned long data_size = data->blocksize * data->blocks;
 
 	/* Don't support write yet. */
 	if (data->flags & MMC_DATA_WRITE)
 		return UNUSABLE_ERR;
+#ifndef RSI_BLKSZ
 	data_ctl |= ((ffs(data_size) - 1) << 4);
+#else
+	bfin_write_SDH_BLK_SIZE(data_size);
+#endif
 	data_ctl |= DTX_DIR;
 	bfin_write_SDH_DATA_CTL(data_ctl);
-	dma_cfg = WDSIZE_32 | RESTART | WNR | DMAEN;
+	dma_cfg = WDSIZE_32 | PSIZE_32 | RESTART | WNR | DMAEN;
 
 	bfin_write_SDH_DATA_TIMER(-1);
 
@@ -137,7 +158,7 @@ static int sdh_setup_data(struct mmc *mmc, struct mmc_data *data)
 	/* kick off transfer */
 	bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
 
-	return ret;
+	return 0;
 }
 
 
@@ -147,13 +168,23 @@ static int bfin_sdh_request(struct mmc *mmc, struct mmc_cmd *cmd,
 	u32 status;
 	int ret = 0;
 
+	if (data) {
+		ret = sdh_setup_data(mmc, data);
+		if (ret)
+			return ret;
+	}
+
 	ret = sdh_send_cmd(mmc, cmd);
 	if (ret) {
+		bfin_write_SDH_COMMAND(0);
+		bfin_write_DMA_CONFIG(0);
+		bfin_write_SDH_DATA_CTL(0);
+		SSYNC();
 		printf("sending CMD%d failed\n", cmd->cmdidx);
 		return ret;
 	}
+
 	if (data) {
-		ret = sdh_setup_data(mmc, data);
 		do {
 			udelay(1);
 			status = bfin_read_SDH_STATUS();
@@ -208,10 +239,12 @@ static void bfin_sdh_set_ios(struct mmc *mmc)
 
 	if (mmc->bus_width == 4) {
 		cfg = bfin_read_SDH_CFG();
-		cfg &= ~0x80;
-		cfg |= 0x40;
+#ifndef RSI_BLKSZ
+		cfg &= ~PD_SDDAT3;
+#endif
+		cfg |= PUP_SDDAT3;
 		bfin_write_SDH_CFG(cfg);
-		clk_ctl |= WIDE_BUS;
+		clk_ctl |= WIDE_BUS_4;
 	}
 	bfin_write_SDH_CLK_CTL(clk_ctl);
 	sdh_set_clk(mmc->clock);
@@ -220,20 +253,23 @@ static void bfin_sdh_set_ios(struct mmc *mmc)
 static int bfin_sdh_init(struct mmc *mmc)
 {
 	const unsigned short pins[] = PORTMUX_PINS;
-	u16 pwr_ctl = 0;
+	int ret;
 
 	/* Initialize sdh controller */
-	peripheral_request_list(pins, "bfin_sdh");
+	ret = peripheral_request_list(pins, "bfin_sdh");
+	if (ret < 0)
+		return ret;
 #if defined(__ADSPBF54x__)
 	bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
 #endif
 	bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
 	/* Disable card detect pin */
 	bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | 0x60);
-
-	pwr_ctl |= ROD_CTL;
-	pwr_ctl |= PWR_ON;
-	bfin_write_SDH_PWR_CTL(pwr_ctl);
+#ifndef RSI_BLKSZ
+	bfin_write_SDH_PWR_CTL(PWR_ON | ROD_CTL);
+#else
+	bfin_write_SDH_CFG(bfin_read_SDH_CFG() | PWR_ON);
+#endif
 	return 0;
 }
 
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 83abcbda28..b8264df3a9 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -31,6 +31,7 @@ COBJS-$(CONFIG_ARMADA100_SPI) += armada100_spi.o
 COBJS-$(CONFIG_ATMEL_DATAFLASH_SPI) += atmel_dataflash_spi.o
 COBJS-$(CONFIG_ATMEL_SPI) += atmel_spi.o
 COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o
+COBJS-$(CONFIG_BFIN_SPI6XX) += bfin_spi6xx.o
 COBJS-$(CONFIG_CF_SPI) += cf_spi.o
 COBJS-$(CONFIG_CF_QSPI) += cf_qspi.o
 COBJS-$(CONFIG_DAVINCI_SPI) += davinci_spi.o
diff --git a/drivers/spi/bfin_spi6xx.c b/drivers/spi/bfin_spi6xx.c
new file mode 100644
index 0000000000..fde3447426
--- /dev/null
+++ b/drivers/spi/bfin_spi6xx.c
@@ -0,0 +1,308 @@
+/*
+ * Analog Devices SPI3 controller driver
+ *
+ * Copyright (c) 2011 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/portmux.h>
+#include <asm/mach-common/bits/spi6xx.h>
+
+struct bfin_spi_slave {
+	struct spi_slave slave;
+	u32 control, clock;
+	struct bfin_spi_regs *regs;
+	int cs_pol;
+};
+
+#define to_bfin_spi_slave(s) container_of(s, struct bfin_spi_slave, slave)
+
+#define gpio_cs(cs) ((cs) - MAX_CTRL_CS)
+#ifdef CONFIG_BFIN_SPI_GPIO_CS
+# define is_gpio_cs(cs) ((cs) > MAX_CTRL_CS)
+#else
+# define is_gpio_cs(cs) 0
+#endif
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	if (is_gpio_cs(cs))
+		return gpio_is_valid(gpio_cs(cs));
+	else
+		return (cs >= 1 && cs <= MAX_CTRL_CS);
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
+
+	if (is_gpio_cs(slave->cs)) {
+		unsigned int cs = gpio_cs(slave->cs);
+		gpio_set_value(cs, bss->cs_pol);
+	} else {
+		u32 ssel;
+		ssel = bfin_read32(&bss->regs->ssel);
+		ssel |= 1 << slave->cs;
+		if (bss->cs_pol)
+			ssel |= (1 << 8) << slave->cs;
+		else
+			ssel &= ~((1 << 8) << slave->cs);
+		bfin_write32(&bss->regs->ssel, ssel);
+	}
+
+	SSYNC();
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
+
+	if (is_gpio_cs(slave->cs)) {
+		unsigned int cs = gpio_cs(slave->cs);
+		gpio_set_value(cs, !bss->cs_pol);
+	} else {
+		u32 ssel;
+		ssel = bfin_read32(&bss->regs->ssel);
+		if (bss->cs_pol)
+			ssel &= ~((1 << 8) << slave->cs);
+		else
+			ssel |= (1 << 8) << slave->cs;
+		/* deassert cs */
+		bfin_write32(&bss->regs->ssel, ssel);
+		SSYNC();
+		/* disable cs */
+		ssel &= ~(1 << slave->cs);
+		bfin_write32(&bss->regs->ssel, ssel);
+	}
+
+	SSYNC();
+}
+
+void spi_init()
+{
+}
+
+#define SPI_PINS(n) \
+	{ 0, P_SPI##n##_SCK, P_SPI##n##_MISO, P_SPI##n##_MOSI, 0 }
+static unsigned short pins[][5] = {
+#ifdef SPI0_REGBASE
+	[0] = SPI_PINS(0),
+#endif
+#ifdef SPI1_REGBASE
+	[1] = SPI_PINS(1),
+#endif
+#ifdef SPI2_REGBASE
+	[2] = SPI_PINS(2),
+#endif
+};
+
+#define SPI_CS_PINS(n) \
+	{ \
+		P_SPI##n##_SSEL1, P_SPI##n##_SSEL2, P_SPI##n##_SSEL3, \
+		P_SPI##n##_SSEL4, P_SPI##n##_SSEL5, P_SPI##n##_SSEL6, \
+		P_SPI##n##_SSEL7, \
+	}
+static const unsigned short cs_pins[][7] = {
+#ifdef SPI0_REGBASE
+	[0] = SPI_CS_PINS(0),
+#endif
+#ifdef SPI1_REGBASE
+	[1] = SPI_CS_PINS(1),
+#endif
+#ifdef SPI2_REGBASE
+	[2] = SPI_CS_PINS(2),
+#endif
+};
+
+void spi_set_speed(struct spi_slave *slave, uint hz)
+{
+	struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
+	ulong sclk;
+	u32 clock;
+
+	sclk = get_sclk1();
+	clock = sclk / hz;
+	if (clock)
+		clock--;
+	bss->clock = clock;
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+		unsigned int max_hz, unsigned int mode)
+{
+	struct bfin_spi_slave *bss;
+	u32 reg_base;
+
+	if (!spi_cs_is_valid(bus, cs))
+		return NULL;
+
+	if (bus >= ARRAY_SIZE(pins) || pins[bus] == NULL) {
+		debug("%s: invalid bus %u\n", __func__, bus);
+		return NULL;
+	}
+	switch (bus) {
+#ifdef SPI0_REGBASE
+	case 0:
+		reg_base = SPI0_REGBASE;
+		break;
+#endif
+#ifdef SPI1_REGBASE
+	case 1:
+		reg_base = SPI1_REGBASE;
+		break;
+#endif
+#ifdef SPI2_REGBASE
+	case 2:
+		reg_base = SPI2_REGBASE;
+		break;
+#endif
+	default:
+		return NULL;
+	}
+
+	bss = malloc(sizeof(*bss));
+	if (!bss)
+		return NULL;
+
+	bss->slave.bus = bus;
+	bss->slave.cs = cs;
+	bss->regs = (struct bfin_spi_regs *)reg_base;
+	bss->control = SPI_CTL_EN | SPI_CTL_MSTR;
+	if (mode & SPI_CPHA)
+		bss->control |= SPI_CTL_CPHA;
+	if (mode & SPI_CPOL)
+		bss->control |= SPI_CTL_CPOL;
+	if (mode & SPI_LSB_FIRST)
+		bss->control |= SPI_CTL_LSBF;
+	bss->control &= ~SPI_CTL_ASSEL;
+	bss->cs_pol = mode & SPI_CS_HIGH ? 1 : 0;
+	spi_set_speed(&bss->slave, max_hz);
+
+	return &bss->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+	struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
+	free(bss);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+	struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
+
+	debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
+
+	if (is_gpio_cs(slave->cs)) {
+		unsigned int cs = gpio_cs(slave->cs);
+		gpio_request(cs, "bfin-spi");
+		gpio_direction_output(cs, !bss->cs_pol);
+		pins[slave->bus][0] = P_DONTCARE;
+	} else
+		pins[slave->bus][0] = cs_pins[slave->bus][slave->cs - 1];
+	peripheral_request_list(pins[slave->bus], "bfin-spi");
+
+	bfin_write32(&bss->regs->control, bss->control);
+	bfin_write32(&bss->regs->clock, bss->clock);
+	bfin_write32(&bss->regs->delay, 0x0);
+	bfin_write32(&bss->regs->rx_control, SPI_RXCTL_REN);
+	bfin_write32(&bss->regs->tx_control, SPI_TXCTL_TEN | SPI_TXCTL_TTI);
+	SSYNC();
+
+	return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+	struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
+
+	debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
+
+	peripheral_free_list(pins[slave->bus]);
+	if (is_gpio_cs(slave->cs))
+		gpio_free(gpio_cs(slave->cs));
+
+	bfin_write32(&bss->regs->rx_control, 0x0);
+	bfin_write32(&bss->regs->tx_control, 0x0);
+	bfin_write32(&bss->regs->control, 0x0);
+	SSYNC();
+}
+
+#ifndef CONFIG_BFIN_SPI_IDLE_VAL
+# define CONFIG_BFIN_SPI_IDLE_VAL 0xff
+#endif
+
+static int spi_pio_xfer(struct bfin_spi_slave *bss, const u8 *tx, u8 *rx,
+			uint bytes)
+{
+	/* discard invalid rx data and empty rfifo */
+	while (!(bfin_read32(&bss->regs->status) & SPI_STAT_RFE))
+		bfin_read32(&bss->regs->rfifo);
+
+	while (bytes--) {
+		u8 value = (tx ? *tx++ : CONFIG_BFIN_SPI_IDLE_VAL);
+		debug("%s: tx:%x ", __func__, value);
+		bfin_write32(&bss->regs->tfifo, value);
+		SSYNC();
+		while (bfin_read32(&bss->regs->status) & SPI_STAT_RFE)
+			if (ctrlc())
+				return -1;
+		value = bfin_read32(&bss->regs->rfifo);
+		if (rx)
+			*rx++ = value;
+		debug("rx:%x\n", value);
+	}
+
+	return 0;
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+		void *din, unsigned long flags)
+{
+	struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
+	const u8 *tx = dout;
+	u8 *rx = din;
+	uint bytes = bitlen / 8;
+	int ret = 0;
+
+	debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__,
+		slave->bus, slave->cs, bitlen, bytes, flags);
+
+	if (bitlen == 0)
+		goto done;
+
+	/* we can only do 8 bit transfers */
+	if (bitlen % 8) {
+		flags |= SPI_XFER_END;
+		goto done;
+	}
+
+	if (flags & SPI_XFER_BEGIN)
+		spi_cs_activate(slave);
+
+	ret = spi_pio_xfer(bss, tx, rx, bytes);
+
+ done:
+	if (flags & SPI_XFER_END)
+		spi_cs_deactivate(slave);
+
+	return ret;
+}