mpc83xx: U-Boot support for Wind River SBC8349

I've redone the SBC8349 support to match git-current, which
incorporates all the MPC834x updates from Freescale since the 1.1.6
release,  including the DDR changes.

I've kept all the SBC8349 files as parallel as possible to the
MPC8349EMDS ones for ease of maintenance and to allow for easy
inspection of what was changed to support this board.  Hence the SBC8349
U-Boot has FDT support and everything else that the MPC8349EMDS has.

Fortunately the Freescale updates added support for boards using CS0,
but I had to change spd_sdram.c to allow for board specific settings for
the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
default if the board doesn't specify a value.)

Hopefully this should be mergeable as-is and require no whitespace
cleanups or similar, but if something doesn't measure up then let me
know and I'll fix it.

Thanks,
Paul.

2 files changed, 89 insertions, 0 deletions

diff --git a/drivers/tsec.c b/drivers/tsec.c
index 2524e4f6d2..3f11eb03b4 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -381,6 +381,61 @@ uint mii_parse_sr(uint mii_reg, struct tsec_private * priv)
 	return 0;
 }
 
+/*
+ * Parse the BCM54xx status register for speed and duplex information.
+ * The linux sungem_phy has this information, but in a table format.
+ */
+uint mii_parse_BCM54xx_sr(uint mii_reg, struct tsec_private *priv)
+{
+
+	switch((mii_reg & MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK) >> MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT){
+
+		case 1:
+			printf("Enet starting in 10BT/HD\n");
+			priv->duplexity = 0;
+			priv->speed = 10;
+			break;
+
+		case 2:
+			printf("Enet starting in 10BT/FD\n");
+			priv->duplexity = 1;
+			priv->speed = 10;
+			break;
+
+		case 3:
+			printf("Enet starting in 100BT/HD\n");
+			priv->duplexity = 0;
+			priv->speed = 100;
+			break;
+
+		case 5:
+			printf("Enet starting in 100BT/FD\n");
+			priv->duplexity = 1;
+			priv->speed = 100;
+			break;
+
+		case 6:
+			printf("Enet starting in 1000BT/HD\n");
+			priv->duplexity = 0;
+			priv->speed = 1000;
+			break;
+
+		case 7:
+			printf("Enet starting in 1000BT/FD\n");
+			priv->duplexity = 1;
+			priv->speed = 1000;
+			break;
+
+		default:
+			printf("Auto-neg error, defaulting to 10BT/HD\n");
+			priv->duplexity = 0;
+			priv->speed = 10;
+			break;
+	}
+
+	return 0;
+
+}
 /* Parse the 88E1011's status register for speed and duplex
  * information
  */
@@ -770,6 +825,34 @@ static void tsec_halt(struct eth_device *dev)
 		phy_run_commands(priv, priv->phyinfo->shutdown);
 }
 
+/* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
+struct phy_info phy_info_BCM5461S = {
+	0x02060c1,	/* 5461 ID */
+	"Broadcom BCM5461S",
+	0, /* not clear to me what minor revisions we can shift away */
+	(struct phy_cmd[]) { /* config */
+		/* Reset and configure the PHY */
+		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+		{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
+		{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
+		{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+		{MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
+		{miim_end,}
+	},
+	(struct phy_cmd[]) { /* startup */
+		/* Status is read once to clear old link state */
+		{MIIM_STATUS, miim_read, NULL},
+		/* Auto-negotiate */
+		{MIIM_STATUS, miim_read, &mii_parse_sr},
+		/* Read the status */
+		{MIIM_BCM54xx_AUXSTATUS, miim_read, &mii_parse_BCM54xx_sr},
+		{miim_end,}
+	},
+	(struct phy_cmd[]) { /* shutdown */
+		{miim_end,}
+	},
+};
+
 struct phy_info phy_info_M88E1011S = {
 	0x01410c6,
 	"Marvell 88E1011S",
@@ -1112,6 +1195,7 @@ struct phy_info phy_info_dp83865 = {
 struct phy_info *phy_info[] = {
 	&phy_info_cis8204,
 	&phy_info_cis8201,
+	&phy_info_BCM5461S,
 	&phy_info_M88E1011S,
 	&phy_info_M88E1111S,
 	&phy_info_M88E1145,
diff --git a/drivers/tsec.h b/drivers/tsec.h
index cee30037db..422bc66922 100644
--- a/drivers/tsec.h
+++ b/drivers/tsec.h
@@ -109,6 +109,11 @@
 #define MIIM_GBIT_CONTROL	0x9
 #define MIIM_GBIT_CONTROL_INIT	0xe00
 
+/* Broadcom BCM54xx -- taken from linux sungem_phy */
+#define MIIM_BCM54xx_AUXSTATUS			0x19
+#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_MASK	0x0700
+#define MIIM_BCM54xx_AUXSTATUS_LINKMODE_SHIFT	8
+
 /* Cicada Auxiliary Control/Status Register */
 #define MIIM_CIS8201_AUX_CONSTAT        0x1c
 #define MIIM_CIS8201_AUXCONSTAT_INIT    0x0004