diff options
| author | wdenk <wdenk> | 2003-10-15 23:53:47 +0000 |
|---|---|---|
| committer | wdenk <wdenk> | 2003-10-15 23:53:47 +0000 |
| commit | 42d1f0394bef0624fc9664714d54bb137931d6a6 (patch) | |
| tree | 892a4130507484d25faf9a72e019cf88cfb3e3d9 /drivers | |
| parent | 2d5b561e2bfdee8552a99b2cf93016cce2a74895 (diff) | |
| download | blackbird-obmc-uboot-42d1f0394bef0624fc9664714d54bb137931d6a6.tar.gz blackbird-obmc-uboot-42d1f0394bef0624fc9664714d54bb137931d6a6.zip | |
* Patches by Xianghua Xiao, 15 Oct 2003:
- Added Motorola CPU 8540/8560 support (cpu/85xx)
- Added Motorola MPC8540ADS board support (board/mpc8540ads)
- Added Motorola MPC8560ADS board support (board/mpc8560ads)
* Minor code cleanup
Diffstat (limited to 'drivers')
45 files changed, 2025 insertions, 2036 deletions
diff --git a/drivers/dc2114x.c b/drivers/dc2114x.c index e1147c0097..75bc618502 100644 --- a/drivers/dc2114x.c +++ b/drivers/dc2114x.c @@ -169,7 +169,11 @@ static void dc21x4x_halt(struct eth_device* dev); extern void dc21x4x_select_media(struct eth_device* dev); #endif +#if defined(CONFIG_E500) +#define phys_to_bus(a) (a) +#else #define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a) +#endif static int INL(struct eth_device* dev, u_long addr) { diff --git a/drivers/eepro100.c b/drivers/eepro100.c index ab8f1d99ed..9839a184a4 100644 --- a/drivers/eepro100.c +++ b/drivers/eepro100.c @@ -248,8 +248,13 @@ static int eepro100_send (struct eth_device *dev, volatile void *packet, static int eepro100_recv (struct eth_device *dev); static void eepro100_halt (struct eth_device *dev); +#if defined(CONFIG_E500) +#define bus_to_phys(a) (a) +#define phys_to_bus(a) (a) +#else #define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a) #define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a) +#endif static inline int INW (struct eth_device *dev, u_long addr) { diff --git a/drivers/pci_indirect.c b/drivers/pci_indirect.c index 05cfbd9b66..7dc17a7a3a 100644 --- a/drivers/pci_indirect.c +++ b/drivers/pci_indirect.c @@ -32,6 +32,17 @@ indirect_##rw##_config_##size(struct pci_controller *hose, \ cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ return 0; \ } +#elif defined(CONFIG_E500) +#define INDIRECT_PCI_OP(rw, size, type, op, mask) \ +static int \ +indirect_##rw##_config_##size(struct pci_controller *hose, \ + pci_dev_t dev, int offset, type val) \ +{ \ + *(hose->cfg_addr) = dev | (offset & 0xfc) | 0x80000000; \ + sync(); \ + cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ + return 0; \ +} #else #define INDIRECT_PCI_OP(rw, size, type, op, mask) \ static int \ diff --git a/drivers/sk98lin/Makefile b/drivers/sk98lin/Makefile index f48b37ed9e..8ee0e216cd 100644 --- a/drivers/sk98lin/Makefile +++ b/drivers/sk98lin/Makefile @@ -29,8 +29,8 @@ include $(TOPDIR)/config.mk LIB := libsk98lin.a OBJS := skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \ - ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \ - skxmac2.o skcsum.o #skproc.o + ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \ + skxmac2.o skcsum.o #skproc.o OBJS += uboot_skb.o uboot_drv.o @@ -99,5 +99,3 @@ $(LIB): $(OBJS) sinclude .depend ######################################################################### - - diff --git a/drivers/sk98lin/h/lm80.h b/drivers/sk98lin/h/lm80.h index 71cf19148f..981a4cab02 100644 --- a/drivers/sk98lin/h/lm80.h +++ b/drivers/sk98lin/h/lm80.h @@ -1,6 +1,6 @@ /****************************************************************************** * - * Name: lm80.h + * Name: lm80.h * Project: GEnesis, PCI Gigabit Ethernet Adapter * Version: $Revision: 1.4 $ * Date: $Date: 2002/04/25 11:04:10 $ @@ -28,16 +28,16 @@ * $Log: lm80.h,v $ * Revision 1.4 2002/04/25 11:04:10 rschmidt * Editorial changes - * + * * Revision 1.3 1999/11/22 13:41:19 cgoos * Changed license header to GPL. - * + * * Revision 1.2 1999/03/12 13:26:51 malthoff * remove __STDC__. - * + * * Revision 1.1 1998/06/19 09:28:31 malthoff * created. - * + * * ******************************************************************************/ diff --git a/drivers/sk98lin/h/skaddr.h b/drivers/sk98lin/h/skaddr.h index 7f85ea7e79..711f873e7f 100644 --- a/drivers/sk98lin/h/skaddr.h +++ b/drivers/sk98lin/h/skaddr.h @@ -28,90 +28,90 @@ * $Log: skaddr.h,v $ * Revision 1.26 2002/11/15 07:24:42 tschilli * SK_ADDR_EQUAL macro fixed. - * + * * Revision 1.25 2002/06/10 13:55:18 tschilli * Changes for handling YUKON. * All changes are internally and not visible to the programmer * using this module. - * + * * Revision 1.24 2001/01/22 13:41:34 rassmann * Supporting two nets on dual-port adapters. - * + * * Revision 1.23 2000/08/10 11:27:50 rassmann * Editorial changes. * Preserving 32-bit alignment in structs for the adapter context. - * + * * Revision 1.22 2000/08/07 11:10:40 rassmann * Editorial changes. - * + * * Revision 1.21 2000/05/04 09:39:59 rassmann * Editorial changes. * Corrected multicast address hashing. - * + * * Revision 1.20 1999/11/22 13:46:14 cgoos * Changed license header to GPL. * Allowing overwrite for SK_ADDR_EQUAL. - * + * * Revision 1.19 1999/05/28 10:56:07 rassmann * Editorial changes. - * + * * Revision 1.18 1999/04/06 17:22:04 rassmann * Added private "ActivePort". - * + * * Revision 1.17 1999/01/14 16:18:19 rassmann * Corrected multicast initialization. - * + * * Revision 1.16 1999/01/04 10:30:36 rassmann * SkAddrOverride only possible after SK_INIT_IO phase. - * + * * Revision 1.15 1998/12/29 13:13:11 rassmann * An address override is now preserved in the SK_INIT_IO phase. * All functions return an int now. * Extended parameter checking. - * + * * Revision 1.14 1998/11/24 12:39:45 rassmann * Reserved multicast entry for BPDU address. * 13 multicast entries left for protocol. - * + * * Revision 1.13 1998/11/13 17:24:32 rassmann * Changed return value of SkAddrOverride to int. - * + * * Revision 1.12 1998/11/13 16:56:19 rassmann * Added macro SK_ADDR_COMPARE. * Changed return type of SkAddrOverride to SK_BOOL. - * + * * Revision 1.11 1998/10/28 18:16:35 rassmann * Avoiding I/Os before SK_INIT_RUN level. * Aligning InexactFilter. - * + * * Revision 1.10 1998/10/22 11:39:10 rassmann * Corrected signed/unsigned mismatches. - * + * * Revision 1.9 1998/10/15 15:15:49 rassmann * Changed Flags Parameters from SK_U8 to int. * Checked with lint. - * + * * Revision 1.8 1998/09/24 19:15:12 rassmann * Code cleanup. - * + * * Revision 1.7 1998/09/18 20:22:13 rassmann * Added HW access. - * + * * Revision 1.6 1998/09/04 19:40:20 rassmann * Interface enhancements. - * + * * Revision 1.5 1998/09/04 12:40:57 rassmann * Interface cleanup. - * + * * Revision 1.4 1998/09/04 12:14:13 rassmann * Interface cleanup. - * + * * Revision 1.3 1998/09/02 16:56:40 rassmann * Updated interface. - * + * * Revision 1.2 1998/08/27 14:26:09 rassmann * Updated interface. - * + * * Revision 1.1 1998/08/21 08:31:08 rassmann * First public version. * @@ -401,7 +401,7 @@ extern int SkAddrGmacPromiscuousChange( SK_AC *pAC, SK_IOC IoC, SK_U32 PortNumber, - int NewPromMode); + int NewPromMode); extern int SkAddrSwap( SK_AC *pAC, diff --git a/drivers/sk98lin/h/skcsum.h b/drivers/sk98lin/h/skcsum.h index b7226f1069..2acae329e3 100644 --- a/drivers/sk98lin/h/skcsum.h +++ b/drivers/sk98lin/h/skcsum.h @@ -28,34 +28,34 @@ * $Log: skcsum.h,v $ * Revision 1.9 2001/02/06 11:21:39 rassmann * Editorial changes. - * + * * Revision 1.8 2001/02/06 11:15:36 rassmann * Supporting two nets on dual-port adapters. - * + * * Revision 1.7 2000/06/29 13:17:05 rassmann * Corrected reception of a packet with UDP checksum == 0 (which means there * is no UDP checksum). - * + * * Revision 1.6 2000/02/28 12:33:44 cgoos * Changed C++ style comments to C style. - * + * * Revision 1.5 2000/02/21 12:10:05 cgoos * Fixed license comment. - * + * * Revision 1.4 2000/02/21 11:08:37 cgoos * Merged changes back into common source. - * + * * Revision 1.1 1999/07/26 14:47:49 mkarl * changed from common source to windows specific source * added return SKCS_STATUS_IP_CSUM_ERROR_UDP and * SKCS_STATUS_IP_CSUM_ERROR_TCP to pass the NidsTester * changes for Tx csum offload - * + * * Revision 1.2 1998/09/04 12:16:34 mhaveman * Checked in for Stephan to allow compilation. * -Added definition SK_CSUM_EVENT_CLEAR_PROTO_STATS to clear statistic * -Added prototype for SkCsEvent() - * + * * Revision 1.1 1998/09/01 15:36:53 swolf * initial revision * @@ -130,7 +130,7 @@ * SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok). * SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok. * SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok. - * SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum. + * SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum. */ #ifndef SKCS_OVERWRITE_STATUS /* User overwrite? */ #define SKCS_STATUS int /* Define status type. */ diff --git a/drivers/sk98lin/h/skdebug.h b/drivers/sk98lin/h/skdebug.h index cc14e1c525..cf5b5ad332 100644 --- a/drivers/sk98lin/h/skdebug.h +++ b/drivers/sk98lin/h/skdebug.h @@ -28,42 +28,42 @@ * Revision 1.12 2002/07/15 15:37:13 rschmidt * Power Management support * Editorial changes - * + * * Revision 1.11 2002/04/25 11:04:39 rschmidt * Editorial changes - * + * * Revision 1.10 1999/11/22 13:47:40 cgoos * Changed license header to GPL. - * + * * Revision 1.9 1999/09/14 14:02:43 rwahl * Added SK_DBGMOD_PECP. - * + * * Revision 1.8 1998/11/25 08:31:54 gklug * fix: no C++ comments allowed in common sources - * + * * Revision 1.7 1998/11/24 16:47:24 swolf * Driver may now define its own SK_DBG_MSG() (eg. in "h/skdrv1st.h"). - * + * * Revision 1.6 1998/10/28 10:23:55 rassmann * ADDED SK_DBGMOD_ADDR. - * + * * Revision 1.5 1998/10/22 09:43:55 gklug * add: CSUM module - * + * * Revision 1.4 1998/10/01 07:54:44 gklug * add: PNMI debug module - * + * * Revision 1.3 1998/09/18 08:32:34 afischer * Macros changed according ssr-spec.: * SK_DBG_MODCHK -> SK_DBG_CHKMOD * SK_DBG_CATCHK -> SK_DBG_CHKCAT - * + * * Revision 1.2 1998/07/03 14:38:25 malthoff * Add category SK_DBGCAT_FATAL. - * + * * Revision 1.1 1998/06/19 13:39:01 malthoff * created. - * + * * ******************************************************************************/ diff --git a/drivers/sk98lin/h/skdrv1st.h b/drivers/sk98lin/h/skdrv1st.h index 2d49941758..af34d7b96f 100644 --- a/drivers/sk98lin/h/skdrv1st.h +++ b/drivers/sk98lin/h/skdrv1st.h @@ -28,50 +28,50 @@ * $Log: skdrv1st.h,v $ * Revision 1.11 2003/02/25 14:16:40 mlindner * Fix: Copyright statement - * + * * Revision 1.10 2002/10/02 12:46:02 mlindner * Add: Support for Yukon - * + * * Revision 1.9.2.2 2001/12/07 12:06:42 mlindner * Fix: malloc -> slab changes - * + * * Revision 1.9.2.1 2001/03/12 16:50:59 mlindner * chg: kernel 2.4 adaption - * + * * Revision 1.9 2001/01/22 14:16:04 mlindner * added ProcFs functionality * Dual Net functionality integrated * Rlmt networks added - * + * * Revision 1.8 2000/02/21 12:19:18 cgoos * Added default for SK_DEBUG_CHKMOD/_CHKCAT - * + * * Revision 1.7 1999/11/22 13:50:00 cgoos * Changed license header to GPL. * Added overwrite for several functions. * Removed linux 2.0.x definitions. * Removed PCI vendor ID definition (now in kernel). - * + * * Revision 1.6 1999/07/27 08:03:33 cgoos * Changed SK_IN/OUT macros to readX/writeX instead of memory * accesses (necessary for ALPHA). - * + * * Revision 1.5 1999/07/23 12:10:21 cgoos * Removed SK_RLMT_SLOW_LOOKAHEAD define. - * + * * Revision 1.4 1999/07/14 12:31:13 cgoos * Added SK_RLMT_SLOW_LOOKAHEAD define. - * + * * Revision 1.3 1999/04/07 10:12:54 cgoos * Added check for KERNEL and OPTIMIZATION defines. - * + * * Revision 1.2 1999/03/01 08:51:47 cgoos * Fixed pcibios_read/write definitions. - * + * * Revision 1.1 1999/02/16 07:40:49 cgoos * First version. - * - * + * + * * ******************************************************************************/ @@ -179,7 +179,7 @@ typedef struct s_AC SK_AC; #define SK_MEM_MAPPED_IO -// #define SK_RLMT_SLOW_LOOKAHEAD +/* #define SK_RLMT_SLOW_LOOKAHEAD */ #define SK_MAX_MACS 2 #define SK_MAX_NETS 2 @@ -199,9 +199,9 @@ typedef struct s_DrvRlmtMbuf SK_MBUF; #define SK_STRCMP(pStr1,pStr2) strcmp((char*)(pStr1),(char*)(pStr2)) /* macros to access the adapter */ -#define SK_OUT8(b,a,v) writeb((v), ((b)+(a))) -#define SK_OUT16(b,a,v) writew((v), ((b)+(a))) -#define SK_OUT32(b,a,v) writel((v), ((b)+(a))) +#define SK_OUT8(b,a,v) writeb((v), ((b)+(a))) +#define SK_OUT16(b,a,v) writew((v), ((b)+(a))) +#define SK_OUT32(b,a,v) writel((v), ((b)+(a))) #define SK_IN8(b,a,pv) (*(pv) = readb((b)+(a))) #define SK_IN16(b,a,pv) (*(pv) = readw((b)+(a))) #define SK_IN32(b,a,pv) (*(pv) = readl((b)+(a))) @@ -262,4 +262,3 @@ extern void SkDbgPrintf(const char *format,...); extern void SkErrorLog(SK_AC*, int, int, char*); #endif - diff --git a/drivers/sk98lin/h/skdrv2nd.h b/drivers/sk98lin/h/skdrv2nd.h index 6ac884b4a8..a311827aa7 100644 --- a/drivers/sk98lin/h/skdrv2nd.h +++ b/drivers/sk98lin/h/skdrv2nd.h @@ -28,19 +28,19 @@ * $Log: skdrv2nd.h,v $ * Revision 1.15 2003/02/25 14:16:40 mlindner * Fix: Copyright statement - * + * * Revision 1.14 2003/02/25 13:26:26 mlindner * Add: Support for various vendors - * + * * Revision 1.13 2002/10/02 12:46:02 mlindner * Add: Support for Yukon - * + * * Revision 1.12.2.2 2001/09/05 12:14:50 mlindner * add: New hardware revision int - * + * * Revision 1.12.2.1 2001/03/12 16:50:59 mlindner * chg: kernel 2.4 adaption - * + * * Revision 1.12 2001/03/01 12:52:15 mlindner * Fixed ring size * @@ -66,28 +66,28 @@ * * Revision 1.7 1999/09/28 12:38:21 cgoos * Added CheckQueue to SK_AC. - * + * * Revision 1.6 1999/07/27 08:04:05 cgoos * Added checksumming variables to SK_AC. - * + * * Revision 1.5 1999/03/29 12:33:26 cgoos * Rreversed to fine lock granularity. - * + * * Revision 1.4 1999/03/15 12:14:02 cgoos * Added DriverLock to SK_AC. * Removed other locks. - * + * * Revision 1.3 1999/03/01 08:52:27 cgoos * Changed pAC->PciDev declaration. - * + * * Revision 1.2 1999/02/18 10:57:14 cgoos * Removed SkDrvTimeStamp prototype. * Fixed SkGeOsGetTime prototype. - * + * * Revision 1.1 1999/02/16 07:41:01 cgoos * First version. - * - * + * + * * ******************************************************************************/ @@ -126,40 +126,40 @@ result = SK_FALSE; /* default */ \ /* 3Com (0x10b7) */ \ if (pdev->vendor == 0x10b7) { \ - /* Gigabit Ethernet Adapter (0x1700) */ \ - if ((pdev->device == 0x1700)) { \ - result = SK_TRUE; \ - } \ + /* Gigabit Ethernet Adapter (0x1700) */ \ + if ((pdev->device == 0x1700)) { \ + result = SK_TRUE; \ + } \ /* SysKonnect (0x1148) */ \ } else if (pdev->vendor == 0x1148) { \ - /* SK-98xx Gigabit Ethernet Server Adapter (0x4300) */ \ - /* SK-98xx V2 Gigabit Ethernet Adapter (0x4320) */ \ - if ((pdev->device == 0x4300) || \ - (pdev->device == 0x4320)) { \ - result = SK_TRUE; \ - } \ + /* SK-98xx Gigabit Ethernet Server Adapter (0x4300) */ \ + /* SK-98xx V2 Gigabit Ethernet Adapter (0x4320) */ \ + if ((pdev->device == 0x4300) || \ + (pdev->device == 0x4320)) { \ + result = SK_TRUE; \ + } \ /* D-Link (0x1186) */ \ } else if (pdev->vendor == 0x1186) { \ - /* Gigabit Ethernet Adapter (0x4c00) */ \ - if ((pdev->device == 0x4c00)) { \ - result = SK_TRUE; \ - } \ + /* Gigabit Ethernet Adapter (0x4c00) */ \ + if ((pdev->device == 0x4c00)) { \ + result = SK_TRUE; \ + } \ /* CNet (0x1371) */ \ } else if (pdev->vendor == 0x1371) { \ - /* GigaCard Network Adapter (0x434e) */ \ - if ((pdev->device == 0x434e)) { \ - result = SK_TRUE; \ - } \ + /* GigaCard Network Adapter (0x434e) */ \ + if ((pdev->device == 0x434e)) { \ + result = SK_TRUE; \ + } \ /* Linksys (0x1737) */ \ } else if (pdev->vendor == 0x1737) { \ - /* Gigabit Network Adapter (0x1032) */ \ - /* Gigabit Network Adapter (0x1064) */ \ - if ((pdev->device == 0x1032) || \ - (pdev->device == 0x1064)) { \ - result = SK_TRUE; \ - } \ + /* Gigabit Network Adapter (0x1032) */ \ + /* Gigabit Network Adapter (0x1064) */ \ + if ((pdev->device == 0x1032) || \ + (pdev->device == 0x1064)) { \ + result = SK_TRUE; \ + } \ } else { \ - result = SK_FALSE; \ + result = SK_FALSE; \ } \ } @@ -188,7 +188,6 @@ struct s_DrvRlmtMbuf { }; - /* * ioctl definitions */ @@ -309,7 +308,6 @@ struct s_TxD { #define TX_CTRL_LEN_MASK UINT32_C(0x0000FFFF) - /* The offsets of registers in the TX and RX queue control io area ***********/ #define RX_Q_BUF_CTRL_CNT 0x00 @@ -441,7 +439,7 @@ struct s_DevNet { int Mtu; int Up; SK_AC *pAC; -}; +}; typedef struct s_TxPort TX_PORT; @@ -504,7 +502,7 @@ struct s_AC { SK_PNMI_STRUCT_DATA PnmiStruct; /* structure to get all Pnmi-Data */ int RlmtMode; /* link check mode to set */ int RlmtNets; /* Number of nets */ - + SK_IOC IoBase; /* register set of adapter */ int BoardLevel; /* level of active hw init (0-2) */ char DeviceStr[80]; /* adapter string from vpd */ @@ -520,7 +518,7 @@ struct s_AC { struct SK_NET_DEVICE *Next; /* link all devices (for clearing) */ int RxBufSize; /* length of receive buffers */ #if 0 - struct net_device_stats stats; /* linux 'netstat -i' statistics */ + struct net_device_stats stats; /* linux 'netstat -i' statistics */ #endif int Index; /* internal board index number */ @@ -560,6 +558,4 @@ struct s_AC { }; - #endif /* __INC_SKDRV2ND_H */ - diff --git a/drivers/sk98lin/h/skerror.h b/drivers/sk98lin/h/skerror.h index 573c84f004..a454d9daa9 100644 --- a/drivers/sk98lin/h/skerror.h +++ b/drivers/sk98lin/h/skerror.h @@ -27,23 +27,23 @@ * $Log: skerror.h,v $ * Revision 1.5 2002/04/25 11:05:10 rschmidt * Editorial changes - * + * * Revision 1.4 1999/11/22 13:51:59 cgoos * Changed license header to GPL. - * + * * Revision 1.3 1999/09/14 14:04:42 rwahl * Added error base SK_ERRBASE_PECP. * Changed error base for driver. - * + * * Revision 1.2 1998/08/11 11:15:41 gklug * chg: comments - * + * * Revision 1.1 1998/08/11 11:09:38 gklug * add: error bases * add: error Classes * first version - * - * + * + * * ******************************************************************************/ diff --git a/drivers/sk98lin/h/skgedrv.h b/drivers/sk98lin/h/skgedrv.h index a6bac08421..72ba9ce198 100644 --- a/drivers/sk98lin/h/skgedrv.h +++ b/drivers/sk98lin/h/skgedrv.h @@ -29,22 +29,22 @@ * Revision 1.6 2002/07/15 15:38:01 rschmidt * Power Management support * Editorial changes - * + * * Revision 1.5 2002/04/25 11:05:47 rschmidt * Editorial changes - * + * * Revision 1.4 1999/11/22 13:52:46 cgoos * Changed license header to GPL. - * + * * Revision 1.3 1998/12/01 13:31:39 cgoos * SWITCH INTERN Event added. - * + * * Revision 1.2 1998/11/25 08:28:38 gklug * rmv: PORT SWITCH Event - * + * * Revision 1.1 1998/09/29 06:14:07 gklug * add: driver events (initial version) - * + * * ******************************************************************************/ diff --git a/drivers/sk98lin/h/skgehw.h b/drivers/sk98lin/h/skgehw.h index 4d2499f23a..2c98427675 100644 --- a/drivers/sk98lin/h/skgehw.h +++ b/drivers/sk98lin/h/skgehw.h @@ -1781,7 +1781,7 @@ extern "C" { WOL_CTL_DIS_LINK_CHG_UNIT | \ WOL_CTL_DIS_PATTERN_UNIT | \ WOL_CTL_DIS_MAGIC_PKT_UNIT) - + /* WOL_MATCH_CTL 8 bit WOL Match Control Reg */ #define WOL_CTL_PATT_ENA(x) (BIT_0 << (x)) @@ -1825,7 +1825,7 @@ typedef struct s_HwRxd { SK_U32 RxAdrHi; /* Physical Rx Buffer Address upper dword */ SK_U32 RxStat; /* Receive Frame Status Word */ SK_U32 RxTiSt; /* Receive Time Stamp (from XMAC on GENESIS) */ -#ifndef SK_USE_REV_DESC +#ifndef SK_USE_REV_DESC SK_U16 RxTcpSum1; /* TCP Checksum 1 */ SK_U16 RxTcpSum2; /* TCP Checksum 2 */ SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */ @@ -1906,7 +1906,7 @@ typedef struct s_HwRxd { * * Use this macro to access the Receive and Transmit Queue Registers. * - * para: + * para: * Queue Queue to access. * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2 * Offs Queue register offset. @@ -1921,7 +1921,7 @@ typedef struct s_HwRxd { * * Use this macro to access the RAM Buffer Registers. * - * para: + * para: * Queue Queue to access. * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2 * Offs Queue register offset. @@ -1943,7 +1943,7 @@ typedef struct s_HwRxd { * * Use this macro to access a MAC Related Registers inside the ASIC. * - * para: + * para: * Mac MAC to access. * Values: MAC_1, MAC_2 * Offs MAC register offset. @@ -2200,7 +2200,7 @@ typedef struct s_HwRxd { #define PHY_ADDR_BCOM (1<<8) #define PHY_ADDR_LONE (3<<8) #define PHY_ADDR_NAT (0<<8) - + /* GPHY address (bits 15..11 of SMI control reg) */ #define PHY_ADDR_MARV 0 @@ -2210,7 +2210,7 @@ typedef struct s_HwRxd { * PHY_READ() read a 16 bit value from the PHY * PHY_WRITE() write a 16 bit value to the PHY * - * para: + * para: * IoC I/O context needed for SK I/O macros * pPort Pointer to port struct for PhyAddr * Mac XMAC to access values: MAC_1 or MAC_2 diff --git a/drivers/sk98lin/h/skgehwt.h b/drivers/sk98lin/h/skgehwt.h index bc20ac4892..8aa9edd71c 100644 --- a/drivers/sk98lin/h/skgehwt.h +++ b/drivers/sk98lin/h/skgehwt.h @@ -29,22 +29,22 @@ * $Log: skgehwt.h,v $ * Revision 1.5 1999/11/22 13:54:24 cgoos * Changed license header to GPL. - * + * * Revision 1.4 1998/08/19 09:50:58 gklug * fix: remove struct keyword from c-code (see CCC) add typedefs - * + * * Revision 1.3 1998/08/14 07:09:29 gklug * fix: chg pAc -> pAC - * + * * Revision 1.2 1998/08/07 12:54:21 gklug * fix: first compiled version - * + * * Revision 1.1 1998/08/07 09:32:58 gklug * first version - * - * - * - * + * + * + * + * * ******************************************************************************/ diff --git a/drivers/sk98lin/h/skgei2c.h b/drivers/sk98lin/h/skgei2c.h index 4e843a1085..e639f733c6 100644 --- a/drivers/sk98lin/h/skgei2c.h +++ b/drivers/sk98lin/h/skgei2c.h @@ -29,69 +29,69 @@ * Revision 1.23 2002/12/19 14:34:27 rschmidt * Added cast in macros SK_I2C_SET_BIT() and SK_I2C_CLR_BIT() * Editorial changes (TWSI) - * + * * Revision 1.22 2002/10/14 16:45:56 rschmidt * Editorial changes (TWSI) - * + * * Revision 1.21 2002/08/13 08:42:24 rschmidt * Changed define for SK_MIN_SENSORS back to 5 * Merged defines for PHY PLL 3V3 voltage (A and B) * Editorial changes - * + * * Revision 1.20 2002/08/06 09:43:56 jschmalz * Extensions and changes for Yukon - * + * * Revision 1.19 2002/08/02 12:00:08 rschmidt * Added defines for YUKON sensors * Editorial changes - * + * * Revision 1.18 2001/08/16 12:44:33 afischer * LM80 sensor init values corrected - * + * * Revision 1.17 1999/11/22 13:55:25 cgoos * Changed license header to GPL. - * + * * Revision 1.16 1999/11/12 08:24:10 malthoff * Change voltage warning and error limits * (warning +-5%, error +-10%). - * + * * Revision 1.15 1999/09/14 14:14:43 malthoff * The 1000BT Dual Link adapter has got only one Fan. * The second Fan has been removed. - * + * * Revision 1.14 1999/05/27 13:40:50 malthoff * Fan Divisor = 1. Assuming fan with 6500 rpm. - * + * * Revision 1.13 1999/05/20 14:56:55 malthoff * Bug Fix: Missing brace in SK_LM80_FAN_FAKTOR. - * + * * Revision 1.12 1999/05/20 09:22:00 cgoos * Changes for 1000Base-T (Fan sensors). - * + * * Revision 1.11 1998/10/14 05:57:22 cgoos * Fixed compilation warnings. - * + * * Revision 1.10 1998/09/04 08:37:00 malthoff * bugfix: correct the SK_I2C_GET_CTL() macro. - * + * * Revision 1.9 1998/08/25 06:10:03 gklug * add: thresholds for all sensors * * Revision 1.8 1998/08/20 11:37:42 gklug * chg: change Ioc to IoC - * + * * Revision 1.7 1998/08/20 08:53:11 gklug * fix: compiler errors * add: Threshold values - * + * * Revision 1.6 1998/08/17 11:37:09 malthoff * Bugfix in SK_I2C_CTL macro. The parameter 'dev' * has to be shifted 9 bits. - * + * * Revision 1.5 1998/08/17 06:52:21 malthoff * Remove unrequired macros. * Add macros for accessing TWSI SW register. - * + * * Revision 1.4 1998/08/13 08:30:18 gklug * add: conversion factors for read values * add: new state SEN_VALEXT to read extension value of temperature sensor diff --git a/drivers/sk98lin/h/skgeinit.h b/drivers/sk98lin/h/skgeinit.h index f9148d1604..cdddef92b3 100644 --- a/drivers/sk98lin/h/skgeinit.h +++ b/drivers/sk98lin/h/skgeinit.h @@ -29,71 +29,71 @@ * Revision 1.75 2003/02/05 13:36:39 rschmidt * Added define SK_FACT_78 for YUKON's Host Clock of 78.12 MHz * Editorial changes - * + * * Revision 1.74 2003/01/28 09:39:16 rschmidt * Added entry GIYukonLite in s_GeInit structure * Editorial changes - * + * * Revision 1.73 2002/11/15 12:47:25 rschmidt * Replaced error message SKERR_HWI_E024 for Cable Diagnostic with * Rx queue error in SkGeStopPort(). - * + * * Revision 1.72 2002/11/12 17:08:35 rschmidt * Added entries for Cable Diagnostic to Port structure * Added entries GIPciSlot64 and GIPciClock66 in s_GeInit structure * Added error message for Cable Diagnostic * Added prototypes for SkGmCableDiagStatus() * Editorial changes - * + * * Revision 1.71 2002/10/21 11:26:10 mkarl * Changed interface of SkGeInitAssignRamToQueues(). - * + * * Revision 1.70 2002/10/14 08:21:32 rschmidt * Changed type of GICopperType, GIVauxAvail to SK_BOOL * Added entry PRxOverCnt to Port structure * Added entry GIYukon32Bit in s_GeInit structure * Editorial changes - * + * * Revision 1.69 2002/10/09 16:57:15 mkarl * Added some constants and macros for SkGeInitAssignRamToQueues(). - * + * * Revision 1.68 2002/09/12 08:58:51 rwahl * Retrieve counters needed for XMAC errata workarounds directly because * PNMI returns corrected counter values (e.g. #10620). - * + * * Revision 1.67 2002/08/16 14:40:30 rschmidt * Added entries GIGenesis and GICopperType in s_GeInit structure * Added prototypes for SkMacHashing() * Editorial changes - * + * * Revision 1.66 2002/08/12 13:27:21 rschmidt * Added defines for Link speed capabilities * Added entry PLinkSpeedCap to Port structure * Added entry GIVauxAvail in s_GeInit structure * Added prototypes for SkMacPromiscMode() * Editorial changes - * + * * Revision 1.65 2002/08/08 15:46:18 rschmidt * Added define SK_PHY_ACC_TO for PHY access timeout * Added define SK_XM_RX_HI_WM for XMAC Rx High Watermark * Added define SK_MIN_TXQ_SIZE for Min RAM Buffer Tx Queue Size * Added entry PhyId1 to Port structure - * + * * Revision 1.64 2002/07/23 16:02:56 rschmidt * Added entry GIWolOffs in s_GeInit struct (HW-Bug in YUKON 1st rev.) * Added prototypes for: SkGePhyRead(), SkGePhyWrite() - * + * * Revision 1.63 2002/07/18 08:17:38 rwahl * Corrected definitions for SK_LSPEED_xxx & SK_LSPEED_STAT_xxx. - * + * * Revision 1.62 2002/07/17 18:21:55 rwahl * Added SK_LSPEED_INDETERMINATED define. - * + * * Revision 1.61 2002/07/17 17:16:03 rwahl * - MacType now member of GIni struct. * - Struct alignment to 32bit. * - Editorial change. - * + * * Revision 1.60 2002/07/15 18:23:39 rwahl * Added GeMacFunc to GE Init structure. * Added prototypes for SkXmUpdateStats(), SkGmUpdateStats(), @@ -101,19 +101,19 @@ * SkGmResetCounter(), SkXmOverflowStatus(), SkGmOverflowStatus(). * Added defines for current link speed state. * Added ERRMSG defintions for MacUpdateStat() & MacStatistics(). - * + * * Revision 1.59 2002/07/15 15:40:22 rschmidt * Added entry PLinkSpeedUsed to Port structure * Editorial changes - * + * * Revision 1.58 2002/06/10 09:36:30 rschmidt * Editorial changes. - * + * * Revision 1.57 2002/06/05 08:18:00 rschmidt * Corrected alignment in Port Structure * Added new prototypes for GMAC * Editorial changes - * + * * Revision 1.56 2002/04/25 11:38:12 rschmidt * Added defines for Link speed values * Added defines for Loopback parameters for MAC and PHY @@ -128,150 +128,150 @@ * SkXmPhyRead(), SkXmPhyRead(), SkGmPhyWrite(), SkGmPhyWrite(); * Removed prototypes for static functions in SkXmac2.c * Editorial changes - * + * * Revision 1.55 2002/02/26 15:24:53 rwahl * Fix: no link with manual configuration (#10673). The previous fix for * #10639 was removed. So for RLMT mode = CLS the RLMT may switch to * misconfigured port. It should not occur for the other RLMT modes. - * + * * Revision 1.54 2002/01/18 16:52:52 rwahl * Editorial corrections. - * + * * Revision 1.53 2001/11/20 09:19:58 rwahl * Reworked bugfix #10639 (no dependency to RLMT mode). - * + * * Revision 1.52 2001/10/26 07:52:23 afischer * Port switching bug in `check local link` mode - * + * * Revision 1.51 2001/02/09 12:26:38 cgoos * Inserted #ifdef DIAG for half duplex workaround timer. - * + * * Revision 1.50 2001/02/07 07:56:40 rassmann * Corrected copyright. - * + * * Revision 1.49 2001/01/31 15:32:18 gklug * fix: problem with autosensing an SR8800 switch * add: counter for autoneg timeouts - * + * * Revision 1.48 2000/11/09 11:30:10 rassmann * WA: Waiting after releasing reset until BCom chip is accessible. - * + * * Revision 1.47 2000/10/18 12:22:40 cgoos * Added workaround for half duplex hangup. - * + * * Revision 1.46 2000/08/10 11:28:00 rassmann * Editorial changes. * Preserving 32-bit alignment in structs for the adapter context. - * + * * Revision 1.45 1999/11/22 13:56:19 cgoos * Changed license header to GPL. - * + * * Revision 1.44 1999/10/26 07:34:15 malthoff * The define SK_LNK_ON has been lost in v1.41. - * + * * Revision 1.43 1999/10/06 09:30:16 cgoos * Changed SK_XM_THR_JUMBO. - * + * * Revision 1.42 1999/09/16 12:58:26 cgoos * Changed SK_LED_STANDY macro to be independent of HW link sync. - * + * * Revision 1.41 1999/07/30 06:56:14 malthoff * Correct comment for SK_MS_STAT_UNSET. - * + * * Revision 1.40 1999/05/27 13:38:46 cgoos * Added SK_BMU_TX_WM. * Made SK_BMU_TX_WM and SK_BMU_RX_WM user-definable. * Changed XMAC Tx treshold to max. values. - * + * * Revision 1.39 1999/05/20 14:35:26 malthoff * Remove prototypes for SkGeLinkLED(). - * + * * Revision 1.38 1999/05/19 11:59:12 cgoos * Added SK_MS_CAP_INDETERMINATED define. - * + * * Revision 1.37 1999/05/19 07:32:33 cgoos * Changes for 1000Base-T. * LED-defines for HWAC_LINK_LED macro. - * + * * Revision 1.36 1999/04/08 14:00:24 gklug * add:Port struct field PLinkResCt - * + * * Revision 1.35 1999/03/25 07:43:07 malthoff * Add error string for SKERR_HWI_E018MSG. - * + * * Revision 1.34 1999/03/12 16:25:57 malthoff * Remove PPollRxD and PPollTxD. * Add SKERR_HWI_E017MSG. and SK_DPOLL_MAX. - * + * * Revision 1.33 1999/03/12 13:34:41 malthoff * Add Autonegotiation error codes. * Change defines for parameter Mode in SkXmSetRxCmd(). * Replace __STDC__ by SK_KR_PROTO. - * + * * Revision 1.32 1999/01/25 14:40:20 mhaveman * Added new return states for the virtual management port if multiple * ports are active but differently configured. - * + * * Revision 1.31 1998/12/11 15:17:02 gklug * add: Link partnet autoneg states : Unknown Manual and Auto-negotiation - * + * * Revision 1.30 1998/12/07 12:17:04 gklug * add: Link Partner auto-negotiation flag - * + * * Revision 1.29 1998/12/01 10:54:42 gklug * add: variables for XMAC Errata - * + * * Revision 1.28 1998/12/01 10:14:15 gklug * add: PIsave saves the Interrupt status word - * + * * Revision 1.27 1998/11/26 15:24:52 mhaveman * Added link status states SK_LMODE_STAT_AUTOHALF and * SK_LMODE_STAT_AUTOFULL which are used by PNMI. - * + * * Revision 1.26 1998/11/26 14:53:01 gklug * add:autoNeg Timeout variable - * + * * Revision 1.25 1998/11/26 08:58:50 gklug * add: Link Mode configuration (AUTO Sense mode) - * + * * Revision 1.24 1998/11/24 13:30:27 gklug * add: PCheckPar to port struct - * + * * Revision 1.23 1998/11/18 13:23:26 malthoff * Add SK_PKT_TO_MAX. - * + * * Revision 1.22 1998/11/18 13:19:54 gklug * add: PPrevShorts and PLinkBroken to port struct for WA XMAC Errata #C1 * * Revision 1.21 1998/10/26 08:02:57 malthoff * Add GIRamOffs. - * + * * Revision 1.20 1998/10/19 07:28:37 malthoff * Add prototype for SkGeInitRamIface(). - * + * * Revision 1.19 1998/10/14 14:47:48 malthoff * SK_TIMER should not be defined for Diagnostics. * Add SKERR_HWI_E015MSG and SKERR_HWI_E016MSG. - * + * * Revision 1.18 1998/10/14 14:00:03 gklug * add: timer to port struct for workaround of Errata #2 - * + * * Revision 1.17 1998/10/14 11:23:09 malthoff * Add prototype for SkXmAutoNegDone(). * Fix SkXmSetRxCmd() prototype statement. * * Revision 1.16 1998/10/14 05:42:29 gklug * add: HWLinkUp flag to Port struct - * + * * Revision 1.15 1998/10/09 08:26:33 malthoff * Rename SK_RB_ULPP_B to SK_RB_LLPP_B. - * + * * Revision 1.14 1998/10/09 07:11:13 malthoff * bug fix: SK_FACT_53 is 85 not 117. * Rework time out init values. * Add GIPortUsage and corresponding defines. * Add some error log messages. - * + * * Revision 1.13 1998/10/06 14:13:14 malthoff * Add prototype for SkGeLoadLnkSyncCnt(). * @@ -338,7 +338,7 @@ extern "C" { /* modifying Link LED behaviour (used with SkGeLinkLED()) */ #define SK_LNK_OFF LED_OFF -#define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF) +#define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF) #define SK_LNK_BLINK (LED_ON | LED_BLK_ON | LED_SYNC_ON) #define SK_LNK_PERM (LED_ON | LED_BLK_OFF | LED_SYNC_ON) #define SK_LNK_TST (LED_ON | LED_BLK_ON | LED_SYNC_OFF) @@ -549,7 +549,7 @@ extern "C" { #define SK_LENERR_OK_ON (1<<4) /* Don't chk fr for in range len error */ #define SK_LENERR_OK_OFF (1<<5) /* Check frames for in range len error */ #define SK_BIG_PK_OK_ON (1<<6) /* Don't set Rx Error bit for big frames */ -#define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */ +#define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */ #define SK_SELF_RX_ON (1<<8) /* Enable Rx of own packets */ #define SK_SELF_RX_OFF (1<<9) /* Disable Rx of own packets */ diff --git a/drivers/sk98lin/h/skgepnm2.h b/drivers/sk98lin/h/skgepnm2.h index 2a003545cc..5c44f47719 100644 --- a/drivers/sk98lin/h/skgepnm2.h +++ b/drivers/sk98lin/h/skgepnm2.h @@ -28,81 +28,81 @@ * $Log: skgepnm2.h,v $ * Revision 1.34 2002/12/16 09:05:18 tschilli * Code for VCT handling added. - * + * * Revision 1.33 2002/09/10 09:00:03 rwahl * Adapted boolean definitions according sktypes. - * + * * Revision 1.32 2002/08/09 09:47:01 rwahl * Added write-only flag to oid access defines. * Editorial changes. - * + * * Revision 1.31 2002/07/17 19:23:18 rwahl * - Replaced MAC counter definitions by enumeration. * - Added definition SK_PNMI_MAC_TYPES. * - Added chipset defnition for Yukon. - * + * * Revision 1.30 2001/02/06 10:03:41 mkunz * - Pnmi V4 dual net support added. Interface functions and macros extended * - Vpd bug fixed * - OID_SKGE_MTU added - * + * * Revision 1.29 2001/01/22 13:41:37 rassmann * Supporting two nets on dual-port adapters. - * + * * Revision 1.28 2000/08/03 15:12:48 rwahl * - Additional comment for MAC statistic data structure. - * + * * Revision 1.27 2000/08/01 16:10:18 rwahl * - Added mac statistic data structure for StatRxLongFrame counter. - * + * * Revision 1.26 2000/03/31 13:51:34 rwahl * Added SK_UPTR cast to offset calculation for PNMI struct fields; * missing cast caused compiler warnings by Win64 compiler. - * + * * Revision 1.25 1999/11/22 13:57:41 cgoos * Changed license header to GPL. * Allowing overwrite for SK_PNMI_STORE/_READ defines. - * + * * Revision 1.24 1999/04/13 15:11:11 mhaveman * Changed copyright. - * + * * Revision 1.23 1999/01/28 15:07:12 mhaveman * Changed default threshold for port switches per hour from 10 * to 240 which means 4 switches per minute. This fits better * the granularity of 32 for the port switch estimate * counter. - * + * * Revision 1.22 1999/01/05 12:52:30 mhaveman * Removed macro SK_PNMI_MICRO_SEC. - * + * * Revision 1.21 1999/01/05 12:50:34 mhaveman * Enlarged macro definition SK_PNMI_HUNDREDS_SEC() so that no 64-bit * arithmetic is necessary if SK_TICKS_PER_SEC is 100. - * + * * Revision 1.20 1998/12/09 14:02:53 mhaveman * Defined macro SK_PNMI_DEF_RLMT_CHG_THRES for default port switch * threshold. - * + * * Revision 1.19 1998/12/03 11:28:41 mhaveman * Removed SK_PNMI_CHECKPTR macro. - * + * * Revision 1.18 1998/12/03 11:21:00 mhaveman * -Added pointer check macro SK_PNMI_CHECKPTR * -Added macros SK_PNMI_VPD_ARR_SIZE and SK_PNMI_VPD_STR_SIZE for * VPD key evaluation. - * + * * Revision 1.17 1998/11/20 13:20:33 mhaveman * Fixed bug in SK_PNMI_SET_STAT macro. ErrorStatus was not correctly set. - * + * * Revision 1.16 1998/11/20 08:08:49 mhaveman * Macro SK_PNMI_CHECKFLAGS has got a if clause. - * + * * Revision 1.15 1998/11/03 13:53:40 mhaveman * Fixed alignment problem in macor SK_PNMI_SET_STAT macro. - * + * * Revision 1.14 1998/10/30 15:50:13 mhaveman * Added macro SK_PNMI_MICRO_SEC() - * + * * Revision 1.13 1998/10/30 12:32:20 mhaveman * Added forgotten cast in SK_PNMI_READ_U32 macro. * @@ -110,46 +110,46 @@ * -Changed SK_PNMI_TRAP_SENSOR_LEN because SensorDescr has now * variable string length. * -Defined SK_PNMI_CHECKFLAGS macro - * + * * Revision 1.11 1998/10/29 08:53:34 mhaveman * Removed SK_PNMI_RLM_XXX table indexed because these counters need * not been saved over XMAC resets. - * + * * Revision 1.10 1998/10/28 08:48:20 mhaveman * -Added macros for storage according to alignment * -Changed type of Instance to SK_U32 because of VPD * -Removed trap structures. Not needed because of alignment problem * -Changed type of Action form SK_U8 to int - * + * * Revision 1.9 1998/10/21 13:34:45 mhaveman * Shit, mismatched calculation of SK_PNMI_HUNDREDS_SEC. Corrected. - * + * * Revision 1.8 1998/10/21 13:24:58 mhaveman * Changed calculation of hundreds of seconds. - * + * * Revision 1.7 1998/10/20 07:31:41 mhaveman * Made type changes to unsigned int where possible. - * + * * Revision 1.6 1998/09/04 17:04:05 mhaveman * Added Sync counters to offset storage to provided settled values on * port switch. - * + * * Revision 1.5 1998/09/04 12:45:35 mhaveman * Removed dummies for SK_DRIVER_ macros. They should be added by driver * writer in skdrv2nd.h. - * + * * Revision 1.4 1998/09/04 11:59:50 mhaveman * Everything compiles now. Driver Macros for counting still missing. - * + * * Revision 1.3 1998/08/24 12:01:35 mhaveman * Intermediate state. - * + * * Revision 1.2 1998/08/17 07:51:40 mhaveman * Intermediate state. - * + * * Revision 1.1 1998/08/11 09:08:40 mhaveman * Intermediate state. - * + * ****************************************************************************/ #ifndef _SKGEPNM2_H_ @@ -277,7 +277,7 @@ enum SK_MACSTATS { SK_PNMI_HTX_SYNC, SK_PNMI_HTX_SYNC_OCTET, SK_PNMI_HTX_RESERVED, - + SK_PNMI_HRX, SK_PNMI_HRX_OCTET, SK_PNMI_HRX_OCTETHIGH = SK_PNMI_HRX_OCTET, @@ -315,9 +315,9 @@ enum SK_MACSTATS { SK_PNMI_HRX_1023, SK_PNMI_HRX_MAX, SK_PNMI_HRX_LONGFRAMES, - + SK_PNMI_HRX_RESERVED, - + SK_PNMI_MAX_IDX /* NOTE: Ensure SK_PNMI_CNT_NO is set to this value */ }; diff --git a/drivers/sk98lin/h/skgepnmi.h b/drivers/sk98lin/h/skgepnmi.h index c1f847e006..7532313ba8 100644 --- a/drivers/sk98lin/h/skgepnmi.h +++ b/drivers/sk98lin/h/skgepnmi.h @@ -28,44 +28,44 @@ * $Log: skgepnmi.h,v $ * Revision 1.59 2002/12/16 14:03:50 tschilli * New defines for VCT added. - * + * * Revision 1.58 2002/12/16 09:04:59 tschilli * Code for VCT handling added. - * + * * Revision 1.57 2002/09/26 12:41:05 tschilli * SK_PNMI_PORT BufPort entry in struct SK_PNMI added. - * + * * Revision 1.56 2002/08/16 11:10:41 rwahl * - Replaced c++ comment. - * + * * Revision 1.55 2002/08/09 15:40:21 rwahl * Editorial change (renamed ConfSpeedCap). - * + * * Revision 1.54 2002/08/09 11:06:07 rwahl * Added OID_SKGE_SPEED_CAP. - * + * * Revision 1.53 2002/08/09 09:45:28 rwahl * Added support for NDIS OID_PNP_xxx. * Editorial changes. - * + * * Revision 1.52 2002/08/06 17:54:07 rwahl * - Added speed cap to PNMI config struct. - * + * * Revision 1.51 2002/07/17 19:19:26 rwahl * - Added OID_SKGE_SPEED_MODE and OID_SKGE_SPEED_STATUS. * - Added SK_PNMI_CNT_RX_PMACC_ERR() & SK_PNMI_CNT_RX_LONGFRAMES(). * - Added speed mode & status to PNMI config struct. * - Editorial changes. - * + * * Revision 1.50 2002/05/22 08:59:37 rwahl * Added string definitions for error msgs. - * + * * Revision 1.49 2001/11/20 09:23:50 rwahl * - pnmi struct: reordered and aligned to 32bit. - * + * * Revision 1.48 2001/02/23 14:34:24 mkunz * Changed macro PHYS2INST. Added pAC to Interface - * + * * Revision 1.47 2001/02/07 08:28:23 mkunz * - Added Oids: OID_SKGE_DIAG_ACTION * OID_SKGE_DIAG_RESULT @@ -73,161 +73,161 @@ * OID_SKGE_CURRENT_PACKET_FILTER * OID_SKGE_INTERMEDIATE_SUPPORT * - Changed value of OID_SKGE_MTU - * + * * Revision 1.46 2001/02/06 10:01:41 mkunz * - Pnmi V4 dual net support added. Interface functions and macros extended * - Vpd bug fixed * - OID_SKGE_MTU added - * + * * Revision 1.45 2001/01/22 13:41:37 rassmann * Supporting two nets on dual-port adapters. - * + * * Revision 1.44 2000/09/07 07:35:27 rwahl * - removed NDIS counter specific data type. * - fixed spelling for OID_SKGE_RLMT_PORT_PREFERRED. - * + * * Revision 1.43 2000/08/04 11:41:08 rwahl * - Fixed compiler warning (port is always >= 0) for macros * SK_PNMI_CNT_RX_LONGFRAMES & SK_PNMI_CNT_SYNC_OCTETS - * + * * Revision 1.42 2000/08/03 15:14:07 rwahl * - Corrected error in driver macros addressing a physical port. - * + * * Revision 1.41 2000/08/01 16:22:29 rwahl * - Changed MDB version to 3.1. * - Added definitions for StatRxLongFrames counter. * - Added macro to be used by driver to count long frames received. * - Added directive to control width (default = 32bit) of NDIS statistic * counters (SK_NDIS_64BIT_CTR). - * + * * Revision 1.40 2000/03/31 13:51:34 rwahl * Added SK_UPTR cast to offset calculation for PNMI struct fields; * missing cast caused compiler warnings by Win64 compiler. * * Revision 1.39 1999/12/06 10:09:47 rwahl * Added new error log message. - * + * * Revision 1.38 1999/11/22 13:57:55 cgoos * Changed license header to GPL. * * Revision 1.37 1999/09/14 14:25:32 rwahl * Set MDB version for 1000Base-T (sensors, Master/Slave) changes. - * + * * Revision 1.36 1999/05/20 09:24:56 cgoos * Changes for 1000Base-T (sensors, Master/Slave). - * + * * Revision 1.35 1999/04/13 15:10:51 mhaveman * Replaced RLMT macros SK_RLMT_CHECK_xxx again by those of PNMI to * grant unified interface. But PNMI macros will store the same * value as RLMT macros. - * + * * Revision 1.34 1999/04/13 15:03:49 mhaveman * -Changed copyright * -Removed SK_PNMI_RLMT_MODE_CHK_xxx macros. Those of RLMT should be * used. - * + * * Revision 1.33 1999/03/23 10:41:02 mhaveman * Changed comments. - * + * * Revision 1.32 1999/01/25 15:01:33 mhaveman * Added support for multiple simultaniously active ports. - * + * * Revision 1.31 1999/01/19 10:06:26 mhaveman * Added new error log message. - * + * * Revision 1.30 1999/01/05 10:34:49 mhaveman * Fixed little error in RlmtChangeEstimate calculation. - * + * * Revision 1.29 1999/01/05 09:59:41 mhaveman * Redesigned port switch average calculation to avoid 64bit * arithmetic. - * + * * Revision 1.28 1998/12/08 10:05:48 mhaveman * Defined macro SK_PNMI_MIN_STRUCT_SIZE. - * + * * Revision 1.27 1998/12/03 14:39:35 mhaveman * Fixed problem that LSTAT was enumerated wrong. - * + * * Revision 1.26 1998/12/03 11:19:51 mhaveman * Changed contents of errlog message SK_PNMI_ERR016MSG - * + * * Revision 1.25 1998/12/01 10:40:04 mhaveman * Changed size of SensorNumber, ChecksumNumber and RlmtPortNumber in * SK_PNMI_STRUCT_DATA to be conform with OID definition. - * + * * Revision 1.24 1998/11/20 08:09:27 mhaveman * Added macros to convert between logical, physical port indexes and * instances. - * + * * Revision 1.23 1998/11/10 13:41:13 mhaveman * Needed to change interface, because NT driver needs a return value * of needed buffer space on TOO_SHORT errors. Therefore all * SkPnmiGet/Preset/Set functions now have a pointer to the length * parameter, where the needed space on error is returned. - * + * * Revision 1.22 1998/11/03 12:05:51 mhaveman * Added pAC parameter to counter macors. * * Revision 1.21 1998/11/02 10:47:36 mhaveman * Added syslog messages for internal errors. - * + * * Revision 1.20 1998/10/30 15:49:36 mhaveman * -Removed unused SK_PNMI_UTILIZATION_BASE and EstOldCnt. * -Redefined SK_PNMI_CHG_EST_BASE to hundreds of seconds. - * + * * Revision 1.19 1998/10/29 15:38:44 mhaveman * Changed string lengths of PNMI_STRUCT_DATA structure because * string OIDs are now encoded with leading length ocetet. - * + * * Revision 1.18 1998/10/29 08:52:27 mhaveman * -Added byte to strings in PNMI_STRUCT_DATA structure. * -Shortened SK_PNMI_RLMT structure to SK_MAX_MACS elements. - * + * * Revision 1.17 1998/10/28 08:49:50 mhaveman * -Changed type of Instance back to SK_U32 because of VPD * -Changed type from SK_U8 to char of PciBusSpeed, PciBusWidth, PMD, * and Connector. - * + * * Revision 1.16 1998/10/22 10:42:31 mhaveman * -Removed (SK_U32) casts for OIDs * -excluded NDIS OIDs when they are already defined with ifndef _NDIS_ - * + * * Revision 1.15 1998/10/20 13:56:28 mhaveman * Headerfile includes now directly other header files to comile correctly. - * + * * Revision 1.14 1998/10/20 07:31:09 mhaveman * Made type changes to unsigned int where possible. - * + * * Revision 1.13 1998/10/19 10:53:13 mhaveman * -Casted OID definitions to SK_U32 * -Renamed RlmtMAC... to RlmtPort... * -Changed wrong type of VpdEntriesList from SK_U32 to char * - * + * * Revision 1.12 1998/10/13 07:42:27 mhaveman * -Added OIDs OID_SKGE_TRAP_NUMBER and OID_SKGE_ALL_DATA * -Removed old cvs history entries * -Renamed MacNumber to PortNumber - * + * * Revision 1.11 1998/10/07 10:55:24 mhaveman * -Added OID_MDB_VERSION. Therefore was a renumbering of the VPD OIDs * necessary. * -Added OID_GEN_ Ids to support the windows driver. - * + * * Revision 1.10 1998/09/30 13:41:10 mhaveman * Renamed some OIDs to reduce usage of 'MAC' which is replaced by 'PORT'. - * + * * Revision 1.9 1998/09/04 17:06:17 mhaveman * -Added SyncCounter as macro. * -Renamed OID_SKGE_.._NO_DESCR_CTS to OID_SKGE_.._NO_BUF_CTS. * -Added macros for driver description and version strings. - * + * * Revision 1.8 1998/09/04 14:36:52 mhaveman * Added OIDs and Structure to access value of macro counters which are * counted by the driver. - * + * * Revision 1.7 1998/09/04 11:59:36 mhaveman * Everything compiles now. Driver Macros for counting still missing. - * + * ****************************************************************************/ #ifndef _SKGEPNMI_H_ @@ -355,7 +355,7 @@ /* #define OID_802_3_MULTICAST_LIST 0x01010103 */ /* #define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104 */ /* #define OID_802_3_MAC_OPTIONS 0x01010105 */ - + #define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101 #define OID_802_3_XMIT_ONE_COLLISION 0x01020102 #define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103 @@ -389,7 +389,7 @@ #define OID_SKGE_VPD_VALUE 0xFF010106 #define OID_SKGE_VPD_ACCESS 0xFF010107 #define OID_SKGE_VPD_ACTION 0xFF010108 - + #define OID_SKGE_PORT_NUMBER 0xFF010110 #define OID_SKGE_DEVICE_TYPE 0xFF010111 #define OID_SKGE_DRIVER_DESCR 0xFF010112 @@ -436,7 +436,7 @@ #define OID_SKGE_SPEED_MODE 0xFF010171 #define OID_SKGE_SPEED_STATUS 0xFF010172 -#define OID_SKGE_SENSOR_NUMBER 0xFF020100 +#define OID_SKGE_SENSOR_NUMBER 0xFF020100 #define OID_SKGE_SENSOR_INDEX 0xFF020101 #define OID_SKGE_SENSOR_DESCR 0xFF020102 #define OID_SKGE_SENSOR_TYPE 0xFF020103 diff --git a/drivers/sk98lin/h/skgesirq.h b/drivers/sk98lin/h/skgesirq.h index 574ca2204a..fc001b2376 100644 --- a/drivers/sk98lin/h/skgesirq.h +++ b/drivers/sk98lin/h/skgesirq.h @@ -28,87 +28,87 @@ * Revision 1.26 2002/10/14 09:52:36 rschmidt * Added SKERR_SIRQ_E023 and SKERR_SIRQ_E023 for GPHY (Yukon) * Editorial changes - * + * * Revision 1.25 2002/07/15 18:15:52 rwahl * Editorial changes. - * + * * Revision 1.24 2002/07/15 15:39:21 rschmidt * Corrected define for SKERR_SIRQ_E022 * Editorial changes - * + * * Revision 1.23 2002/04/25 11:09:45 rschmidt * Removed declarations for SkXmInitPhy(), SkXmRxTxEnable() * Editorial changes - * + * * Revision 1.22 2000/11/09 11:30:10 rassmann * WA: Waiting after releasing reset until BCom chip is accessible. - * + * * Revision 1.21 2000/10/18 12:22:40 cgoos * Added workaround for half duplex hangup. - * + * * Revision 1.20 1999/12/06 10:00:44 cgoos * Added SET event for role. - * + * * Revision 1.19 1999/11/22 13:58:26 cgoos * Changed license header to GPL. - * + * * Revision 1.18 1999/05/19 07:32:59 cgoos * Changes for 1000Base-T. - * + * * Revision 1.17 1999/03/12 13:29:31 malthoff * Move Autonegotiation Error Codes to skgeinit.h. - * + * * Revision 1.16 1999/03/08 10:11:28 gklug * add: AutoNegDone return codes - * + * * Revision 1.15 1998/11/18 13:20:53 gklug * add: different timeouts for active and non-active links - * + * * Revision 1.14 1998/11/04 07:18:14 cgoos * Added prototype for SkXmRxTxEnable. - * + * * Revision 1.13 1998/10/21 05:52:23 gklug * add: parameter DoLoop to InitPhy function - * + * * Revision 1.12 1998/10/19 06:45:03 cgoos * Added prototype for SkXmInitPhy. - * + * * Revision 1.11 1998/10/15 14:34:10 gklug * add: WA_TIME is 500 msec - * + * * Revision 1.10 1998/10/14 14:49:41 malthoff * Remove err log defines E021 and E022. They are * defined in skgeinit.h now. * * Revision 1.9 1998/10/14 14:00:39 gklug * add: error logs for init phys - * + * * Revision 1.8 1998/10/14 05:44:05 gklug * add: E020 - * + * * Revision 1.7 1998/10/02 06:24:58 gklug * add: error messages - * + * * Revision 1.6 1998/10/01 07:54:45 gklug * add: PNMI debug module - * + * * Revision 1.5 1998/09/28 13:36:31 malthoff * Move the bit definitions for Autonegotiation * and Flow Control to skgeinit.h. - * + * * Revision 1.4 1998/09/15 12:29:34 gklug * add: error logs - * + * * Revision 1.3 1998/09/03 13:54:02 gklug * add: function prototypes - * + * * Revision 1.2 1998/09/03 10:24:36 gklug * add: Events send by PNMI * add: parameter definition for Flow Control etc. - * + * * Revision 1.1 1998/08/27 11:50:27 gklug * initial revision - * + * * ******************************************************************************/ diff --git a/drivers/sk98lin/h/ski2c.h b/drivers/sk98lin/h/ski2c.h index 5316bbacba..5ffaf6ede1 100644 --- a/drivers/sk98lin/h/ski2c.h +++ b/drivers/sk98lin/h/ski2c.h @@ -28,88 +28,88 @@ * $Log: ski2c.h,v $ * Revision 1.34 2003/01/28 09:11:21 rschmidt * Editorial changes - * + * * Revision 1.33 2002/10/14 16:40:50 rschmidt * Editorial changes (TWSI) - * + * * Revision 1.32 2002/08/13 08:55:07 rschmidt * Editorial changes - * + * * Revision 1.31 2002/08/06 09:44:22 jschmalz * Extensions and changes for Yukon - * + * * Revision 1.30 2001/04/05 11:38:09 rassmann * Set SenState to idle in SkI2cWaitIrq(). * Changed error message in SkI2cWaitIrq(). - * + * * Revision 1.29 2000/08/03 14:28:17 rassmann * - Added function to wait for I2C being ready before resetting the board. * - Replaced one duplicate "out of range" message with correct one. - * + * * Revision 1.28 1999/11/22 13:55:46 cgoos * Changed license header to GPL. - * + * * Revision 1.27 1999/05/20 09:23:10 cgoos * Changes for 1000Base-T (Fan sensors). - * + * * Revision 1.26 1998/12/01 13:45:47 gklug * add: InitLevel to I2c struct - * + * * Revision 1.25 1998/11/03 06:55:16 gklug * add: Dummy Reads to I2c struct - * + * * Revision 1.24 1998/10/02 14:28:59 cgoos * Added prototype for SkI2cIsr. - * + * * Revision 1.23 1998/09/08 12:20:11 gklug * add: prototypes for init and read functions - * + * * Revision 1.22 1998/09/08 07:37:56 gklug * add: log error if PCI_IO voltage sensor could not be initialized - * + * * Revision 1.21 1998/09/04 08:38:05 malthoff * Change the values for I2C_READ and I2C_WRITE - * + * * Revision 1.20 1998/08/25 07:52:22 gklug * chg: Timestamps (last) added for logging * * Revision 1.19 1998/08/25 06:09:00 gklug * rmv: warning and error levels of the individual sensors. * add: timing definitions for sending traps and logging errors - * + * * Revision 1.18 1998/08/20 11:41:15 gklug * chg: omit STRCPY macro by using char * as Sensor Description - * + * * Revision 1.17 1998/08/20 11:37:43 gklug * chg: change Ioc to IoC - * + * * Revision 1.16 1998/08/20 11:30:38 gklug * fix: SenRead declaration - * + * * Revision 1.15 1998/08/20 11:27:53 gklug * fix: Compile bugs with new awrning constants - * + * * Revision 1.14 1998/08/20 08:53:12 gklug * fix: compiler errors * add: Threshold values - * + * * Revision 1.13 1998/08/19 12:21:16 gklug * fix: remove struct from C files (see CCC) * add: typedefs for all structs - * + * * Revision 1.12 1998/08/19 10:57:41 gklug * add: Warning levels - * + * * Revision 1.11 1998/08/18 08:37:02 malthoff * Prototypes not required for SK_DIAG. - * + * * Revision 1.10 1998/08/17 13:54:00 gklug * fix: declaration of event function - * + * * Revision 1.9 1998/08/17 06:48:39 malthoff * Remove some unrequired macros. * Fix the compiler errors. - * + * * Revision 1.8 1998/08/14 06:47:19 gklug * fix: Values are intergers * @@ -290,4 +290,3 @@ extern void SkI2cIsr(SK_AC *pAC, SK_IOC IoC); #endif #endif /* n_SKI2C_H */ - diff --git a/drivers/sk98lin/h/skqueue.h b/drivers/sk98lin/h/skqueue.h index 2bafd6e3eb..bce20a75b6 100644 --- a/drivers/sk98lin/h/skqueue.h +++ b/drivers/sk98lin/h/skqueue.h @@ -29,50 +29,50 @@ * $Log: skqueue.h,v $ * Revision 1.14 2002/03/15 10:52:13 mkunz * Added event classes for link aggregation - * + * * Revision 1.13 1999/11/22 13:59:05 cgoos * Changed license header to GPL. - * + * * Revision 1.12 1998/09/08 08:48:01 gklug * add: init level handling - * + * * Revision 1.11 1998/09/03 14:15:11 gklug * add: CSUM and HWAC Eventclass and function. * fix: pParaPtr according to CCC - * + * * Revision 1.10 1998/08/20 12:43:03 gklug * add: typedef SK_QUEUE - * + * * Revision 1.9 1998/08/19 09:50:59 gklug * fix: remove struct keyword from c-code (see CCC) add typedefs - * + * * Revision 1.8 1998/08/18 07:00:01 gklug * fix: SK_PTR not defined use void * instead. - * + * * Revision 1.7 1998/08/17 13:43:19 gklug * chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR - * + * * Revision 1.6 1998/08/14 07:09:30 gklug * fix: chg pAc -> pAC - * + * * Revision 1.5 1998/08/11 14:26:44 gklug * chg: Event Dispatcher returns now int. - * + * * Revision 1.4 1998/08/11 12:15:21 gklug * add: Error numbers of skqueue module - * + * * Revision 1.3 1998/08/07 12:54:23 gklug * fix: first compiled version - * + * * Revision 1.2 1998/08/07 09:34:00 gklug * adapt structure defs to CCC * add: prototypes for functions - * + * * Revision 1.1 1998/07/30 14:52:12 gklug * Initial version. * Defines Event Classes, Event structs and queue management variables. - * - * + * + * * ******************************************************************************/ @@ -145,4 +145,3 @@ extern int SkEventDispatcher(SK_AC *pAC,SK_IOC Ioc); #define SKERR_Q_E002 (SKERR_Q_E001+1) #define SKERR_Q_E002MSG "Undefined event class" #endif /* _SKQUEUE_H_ */ - diff --git a/drivers/sk98lin/h/skrlmt.h b/drivers/sk98lin/h/skrlmt.h index 651bb3f8d1..04d025b009 100644 --- a/drivers/sk98lin/h/skrlmt.h +++ b/drivers/sk98lin/h/skrlmt.h @@ -28,122 +28,122 @@ * $Log: skrlmt.h,v $ * Revision 1.35 2003/01/31 14:12:41 mkunz * single port adapter runs now with two identical MAC addresses - * + * * Revision 1.34 2002/09/23 15:13:41 rwahl * Editorial changes. - * + * * Revision 1.33 2001/07/03 12:16:48 mkunz * New Flag ChgBcPrio (Change priority of last broadcast received) - * + * * Revision 1.32 2001/02/14 14:06:31 rassmann * Editorial changes. - * + * * Revision 1.31 2001/02/05 14:25:26 rassmann * Prepared RLMT for transparent operation. - * + * * Revision 1.30 2001/01/22 13:41:39 rassmann * Supporting two nets on dual-port adapters. - * + * * Revision 1.29 2000/11/17 08:58:00 rassmann * Moved CheckSwitch from SK_RLMT_PACKET_RECEIVED to SK_RLMT_TIM event. - * + * * Revision 1.28 2000/11/09 12:24:34 rassmann * Editorial changes. - * + * * Revision 1.27 1999/11/22 13:59:56 cgoos * Changed license header to GPL. - * + * * Revision 1.26 1999/10/04 14:01:19 rassmann * Corrected reaction to reception of BPDU frames (#10441). - * + * * Revision 1.25 1999/07/20 12:53:39 rassmann * Fixed documentation errors for lookahead macros. - * + * * Revision 1.24 1999/05/28 11:15:56 rassmann * Changed behaviour to reflect Design Spec v1.2. * Controlling Link LED(s). * Introduced RLMT Packet Version field in RLMT Packet. * Newstyle lookahead macros (checking meta-information before looking at * the packet). - * + * * Revision 1.23 1999/01/28 12:50:42 rassmann * Not using broadcast time stamps in CheckLinkState mode. - * + * * Revision 1.22 1999/01/27 14:13:04 rassmann * Monitoring broadcast traffic. * Switching more reliably and not too early if switch is * configured for spanning tree. - * + * * Revision 1.21 1998/12/08 13:11:25 rassmann * Stopping SegTimer at RlmtStop. - * + * * Revision 1.20 1998/11/24 12:37:33 rassmann * Implemented segmentation check. - * + * * Revision 1.19 1998/11/17 13:43:06 rassmann * Handling (logical) tx failure. * Sending packet on logical address after PORT_SWITCH. - * + * * Revision 1.18 1998/11/13 16:56:56 rassmann * Added macro version of SkRlmtLookaheadPacket. - * + * * Revision 1.17 1998/11/06 18:06:05 rassmann * Corrected timing when RLMT checks fail. * Clearing tx counter earlier in periodical checks. - * + * * Revision 1.16 1998/11/03 13:53:50 rassmann * RLMT should switch now (at least in mode 3). - * + * * Revision 1.15 1998/10/22 11:39:52 rassmann * Corrected signed/unsigned mismatches. * Corrected receive list handling and address recognition. - * + * * Revision 1.14 1998/10/15 15:16:36 rassmann * Finished Spanning Tree checking. * Checked with lint. - * + * * Revision 1.13 1998/09/24 19:16:08 rassmann * Code cleanup. * Introduced Timer for PORT_DOWN due to no RX. - * + * * Revision 1.12 1998/09/16 11:09:52 rassmann * Syntax corrections. - * + * * Revision 1.11 1998/09/15 11:28:50 rassmann * Syntax corrections. - * + * * Revision 1.10 1998/09/14 17:07:38 rassmann * Added code for port checking via LAN. * Changed Mbuf definition. - * + * * Revision 1.9 1998/09/07 11:14:15 rassmann * Syntax corrections. - * + * * Revision 1.8 1998/09/07 09:06:08 rassmann * Syntax corrections. - * + * * Revision 1.7 1998/09/04 19:41:34 rassmann * Syntax corrections. * Started entering code for checking local links. - * + * * Revision 1.6 1998/09/04 12:14:28 rassmann * Interface cleanup. - * + * * Revision 1.5 1998/09/02 16:55:29 rassmann * Updated to reflect new DRV/HWAC/RLMT interface. - * + * * Revision 1.4 1998/09/02 07:26:02 afischer * typedef for SK_RLMT_PORT * * Revision 1.3 1998/08/27 14:29:03 rassmann * Code cleanup. - * + * * Revision 1.2 1998/08/27 14:26:25 rassmann * Updated interface. - * + * * Revision 1.1 1998/08/21 08:29:10 rassmann * First public version. - * + * ******************************************************************************/ /****************************************************************************** @@ -296,28 +296,28 @@ unsigned *pNumBytes /* #Bytes to present to SK_RLMT_LOOKAHEAD */ *(pNumBytes) = 0; \ } \ else {\ - if ((_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_TRANSPARENT) != 0) { \ - *(pNumBytes) = 0; \ - } \ - else if (IsBc) { \ - if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode != SK_RLMT_MODE_CLS) { \ - *(pNumBytes) = 6; \ - *(pOffset) = 6; \ - } \ - else { \ - *(pNumBytes) = 0; \ - } \ - } \ - else { \ - if ((PktLen) > SK_RLMT_MAX_TX_BUF_SIZE) { \ - /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ - *(pNumBytes) = 0; \ - } \ - else { \ - *(pNumBytes) = 6; \ - *(pOffset) = 0; \ - } \ - } \ + if ((_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_TRANSPARENT) != 0) { \ + *(pNumBytes) = 0; \ + } \ + else if (IsBc) { \ + if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode != SK_RLMT_MODE_CLS) { \ + *(pNumBytes) = 6; \ + *(pOffset) = 6; \ + } \ + else { \ + *(pNumBytes) = 0; \ + } \ + } \ + else { \ + if ((PktLen) > SK_RLMT_MAX_TX_BUF_SIZE) { \ + /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ + *(pNumBytes) = 0; \ + } \ + else { \ + *(pNumBytes) = 6; \ + *(pOffset) = 0; \ + } \ + } \ } \ } @@ -516,9 +516,9 @@ typedef struct s_Rlmt { /* ----- Private part ----- */ SK_BOOL CheckSwitch; - SK_BOOL RlmtOff; /* set to zero if the Mac addresses - are equal or the second one - is zero */ + SK_BOOL RlmtOff; /* set to zero if the Mac addresses + are equal or the second one + is zero */ SK_U16 Align01; } SK_RLMT; diff --git a/drivers/sk98lin/h/sktimer.h b/drivers/sk98lin/h/sktimer.h index 3f5cb1b1ea..36f8ccb6af 100644 --- a/drivers/sk98lin/h/sktimer.h +++ b/drivers/sk98lin/h/sktimer.h @@ -29,32 +29,32 @@ * $Log: sktimer.h,v $ * Revision 1.9 1999/11/22 14:00:29 cgoos * Changed license header to GPL. - * + * * Revision 1.8 1998/09/08 08:48:02 gklug * add: init level handling - * + * * Revision 1.7 1998/08/20 12:31:29 gklug * fix: SK_TIMCTRL needs to be defined - * + * * Revision 1.6 1998/08/19 09:51:00 gklug * fix: remove struct keyword from c-code (see CCC) add typedefs - * + * * Revision 1.5 1998/08/17 13:43:21 gklug * chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR - * + * * Revision 1.4 1998/08/14 07:09:31 gklug * fix: chg pAc -> pAC - * + * * Revision 1.3 1998/08/07 12:54:24 gklug * fix: first compiled version - * + * * Revision 1.2 1998/08/07 09:35:29 gklug * add: Timer control struct for Adapters context * add: function prototypes - * + * * Revision 1.1 1998/08/05 11:27:01 gklug * First version: adapted from SMT - * + * * ******************************************************************************/ diff --git a/drivers/sk98lin/h/sktypes.h b/drivers/sk98lin/h/sktypes.h index 929eca88e2..e657016e5b 100644 --- a/drivers/sk98lin/h/sktypes.h +++ b/drivers/sk98lin/h/sktypes.h @@ -20,7 +20,7 @@ * The information in this file is provided "AS IS" without warranty. * ******************************************************************************/ - + /***************************************************************************** * * History: @@ -28,15 +28,15 @@ * $Log: sktypes.h,v $ * Revision 1.3 2003/02/25 14:16:40 mlindner * Fix: Copyright statement - * + * * Revision 1.2 1999/11/22 14:01:58 cgoos * Changed license header to GPL. * Now using Linux' fixed size types instead of standard types. - * + * * Revision 1.1 1999/02/16 07:41:40 cgoos * First version. - * - * + * + * * *****************************************************************************/ @@ -46,7 +46,7 @@ * * In this file, all data types that are needed by the common modules * are mapped to Linux data types. - * + * * * Include File Hierarchy: * diff --git a/drivers/sk98lin/h/skversion.h b/drivers/sk98lin/h/skversion.h index 74c86080bc..ef466857d1 100644 --- a/drivers/sk98lin/h/skversion.h +++ b/drivers/sk98lin/h/skversion.h @@ -27,28 +27,26 @@ * $Log: skversion.h,v $ * Revision 1.4 2003/02/25 14:16:40 mlindner * Fix: Copyright statement - * + * * Revision 1.3 2003/02/25 13:30:18 mlindner * Add: Support for various vendors - * + * * Revision 1.1.2.1 2001/09/05 13:38:30 mlindner * Removed FILE description - * + * * Revision 1.1 2001/03/06 09:25:00 mlindner * first version - * - * + * + * * ******************************************************************************/ - - + + static const char SysKonnectFileId[] = "@(#) (C) SysKonnect GmbH."; static const char SysKonnectBuildNumber[] = - "@(#)SK-BUILD: 6.05 PL: 01"; + "@(#)SK-BUILD: 6.05 PL: 01"; #define BOOT_STRING "sk98lin: Network Device Driver v6.05\n" \ "(C)Copyright 1999-2003 Marvell(R)." #define VER_STRING "6.05" - - diff --git a/drivers/sk98lin/h/skvpd.h b/drivers/sk98lin/h/skvpd.h index 243373578f..1be34c5a97 100644 --- a/drivers/sk98lin/h/skvpd.h +++ b/drivers/sk98lin/h/skvpd.h @@ -29,59 +29,59 @@ * Revision 1.15 2003/01/13 10:39:38 rschmidt * Replaced define for PCI device Id for YUKON with GENESIS * Editorial changes - * + * * Revision 1.14 2002/11/14 15:18:10 gheinig * Added const specifier to key and buf parameters for VpdPara,VpdRead * and VpdWrite. This is necessary for the Diag 7 GUI API - * + * * Revision 1.13 2002/10/14 15:58:18 rschmidt * Added entry in rom_size struct s_vpd * Editorial changes - * + * * Revision 1.12 2002/09/09 14:43:51 mkarl * added PCI Id of Yukon for reading VPD in diag before the adapter has * been initialized * editorial changes - * + * * Revision 1.11 2002/07/26 13:19:16 mkarl * added support for Yukon * added vpd_size to VPD struct - * + * * Revision 1.10 2000/08/10 11:29:07 rassmann * Editorial changes. * Preserving 32-bit alignment in structs for the adapter context. * Removed unused function VpdWriteDword() (#if 0). * Made VpdReadKeyword() available for SKDIAG only. - * + * * Revision 1.9 1999/11/22 14:02:27 cgoos * Changed license header to GPL. - * + * * Revision 1.8 1999/03/11 14:26:40 malthoff * Replace __STDC__ with SK_KR_PROTO. - * + * * Revision 1.7 1998/10/28 07:27:17 gklug * rmv: SWAP macros * add: VPD_IN/OUT8 macros * chg: interface definition - * + * * Revision 1.6 1998/10/22 10:03:44 gklug * fix: use SK_OUT16 instead of SK_OUTW - * + * * Revision 1.5 1998/10/14 07:05:31 cgoos * Changed constants in SK_SWAP_32 to UL. - * + * * Revision 1.4 1998/08/19 08:14:09 gklug * fix: remove struct keyword as much as possible from the C-code (see CCC) - * + * * Revision 1.3 1998/08/18 08:18:56 malthoff * Modify VPD in and out macros for SK_DIAG - * + * * Revision 1.2 1998/07/03 14:49:08 malthoff * Add VPD_INxx() and VPD_OUTxx() macros for the Diagnostics tool. - * + * * Revision 1.1 1998/06/19 14:08:03 malthoff * Created. - * + * * ******************************************************************************/ diff --git a/drivers/sk98lin/h/xmac_ii.h b/drivers/sk98lin/h/xmac_ii.h index ddddd2b9e0..2ef903a87d 100644 --- a/drivers/sk98lin/h/xmac_ii.h +++ b/drivers/sk98lin/h/xmac_ii.h @@ -30,103 +30,103 @@ * Added defines for copper MDI/MDIX configuration * Added defines for LED Control Register * Editorial changes - * + * * Revision 1.45 2002/12/10 14:35:13 rschmidt * Corrected defines for Extended PHY Specific Control * Added defines for Ext. PHY Specific Ctrl 2 Reg. (Fiber specific) - * + * * Revision 1.44 2002/12/09 14:58:41 rschmidt * Added defines for Ext. PHY Specific Ctrl Reg. (downshift feature) * Added 'GMR_FS_UN_SIZE'-Bit to Rx GMAC FIFO Flush Mask - * + * * Revision 1.43 2002/12/05 10:14:45 rschmidt * Added define for GMAC's Half Duplex Burst Mode * Added define for Rx GMAC FIFO Flush Mask (default) - * + * * Revision 1.42 2002/11/12 16:48:19 rschmidt * Added defines for Cable Diagnostic Register (GPHY) * Editorial changes - * + * * Revision 1.41 2002/10/21 11:20:22 rschmidt * Added bit GMR_FS_GOOD_FC to GMR_FS_ANY_ERR * Editorial changes - * + * * Revision 1.40 2002/10/14 14:54:14 rschmidt * Added defines for GPHY Specific Status and GPHY Interrupt Status * Added bits PHY_M_IS_AN_ERROR and PHY_M_IS_FIFO_ERROR to PHY_M_DEF_MSK * Editorial changes - * + * * Revision 1.39 2002/10/10 15:53:44 mkarl * added some bit definitions for link speed status and LED's - * + * * Revision 1.38 2002/08/21 16:23:46 rschmidt * Added defines for PHY Specific Ctrl Reg * Editorial changes - * + * * Revision 1.37 2002/08/16 14:50:33 rschmidt * Added defines for Auto-Neg. Advertisement YUKON Fiber (88E1011S only) * Changed define PHY_M_DEF_MSK for GPHY IRQ Mask * Editorial changes - * + * * Revision 1.36 2002/08/12 13:21:10 rschmidt * Added defines for different Broadcom PHY Ids - * + * * Revision 1.35 2002/08/08 15:58:01 rschmidt * Added defines for Manual LED Override register (YUKON) * Editorial changes - * + * * Revision 1.34 2002/07/31 17:23:36 rwahl * Added define GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR). - * + * * Revision 1.33 2002/07/23 16:03:37 rschmidt * Added defines for GPHY registers * Editorial changes - * + * * Revision 1.32 2002/07/15 18:14:37 rwahl * Added GMAC MIB counters definitions. * Editorial changes. - * + * * Revision 1.31 2002/07/15 15:42:50 rschmidt * Removed defines from PHY specific reg. which are * common to all PHYs * Added defines for GMAC MIB Counters * Editorial changes - * + * * Revision 1.30 2002/06/05 08:22:12 rschmidt * Changed defines for GMAC Rx Control Register and Rx Status * Editorial changes - * + * * Revision 1.29 2002/04/25 11:43:56 rschmidt * Added define PHY_B_AS_PAUSE_MSK for BCom Pause Res. * Added new registers and defines for YUKON (GMAC, GPHY) * Added Receive Frame Status Encoding for YUKON * Editorial changes - * + * * Revision 1.28 2000/11/09 12:32:49 rassmann * Renamed variables. - * + * * Revision 1.27 2000/05/17 11:00:46 malthoff * Add bit for enable/disable power management in BCOM chip. - * + * * Revision 1.26 1999/11/22 14:03:00 cgoos * Changed license header to GPL. - * + * * Revision 1.25 1999/08/12 19:19:38 malthoff * Add PHY_B_AC_TX_TST bit according to BCOM A1 errata sheet. - * + * * Revision 1.24 1999/07/30 11:27:21 cgoos * Fixed a missing end-of-comment. - * + * * Revision 1.23 1999/07/30 07:03:31 malthoff * Cut some long comments. * Correct the XMAC PHY ID definitions. - * + * * Revision 1.22 1999/05/19 07:33:18 cgoos * Changes for 1000Base-T. - * + * * Revision 1.21 1999/03/25 07:46:11 malthoff * Add XM_HW_CFG, XM_TS_READ, and XM_TS_LOAD registers. - * + * * Revision 1.20 1999/03/12 13:36:09 malthoff * Remove __STDC__. * @@ -912,7 +912,7 @@ extern "C" { /* PHY_AN_LP_NP (see XMAC) Bit 3: Link Partner can Next Page */ /* PHY_AN_LOC_NP (see XMAC) Bit 2: Local PHY can Next Page */ /* PHY_AN_RX_PG (see XMAC) Bit 1: Page Received */ -#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */ +#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */ /***** PHY_LONE_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ #define PHY_L_AN_BP (1<<5) /* Bit 5: Base Page Indication */ @@ -920,7 +920,7 @@ extern "C" { /* PHY_AN_LP_NP (see XMAC) Bit 3: Link Partner can Next Page */ /* PHY_AN_LOC_NP (see XMAC) Bit 2: Local PHY can Next Page */ /* PHY_AN_RX_PG (see XMAC) Bit 1: Page Received */ -#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */ +#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */ /***** PHY_XMAC_NEPG 16 bit r/w Next Page Register *****/ @@ -1315,7 +1315,7 @@ extern "C" { #define PHY_M_PC_POL_R_DIS (1<<1) /* Bit 1: Polarity Reversal Disabled */ #define PHY_M_PC_DIS_JABBER (1<<0) /* Bit 0: Disable Jabber */ -#define PHY_M_PC_MDI_XMODE(x) SHIFT5(x) +#define PHY_M_PC_MDI_XMODE(x) SHIFT5(x) #define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */ #define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */ #define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */ @@ -1614,7 +1614,7 @@ extern "C" { #define GM_GPSR_FC_RX_DIS (1<<2) /* Bit 2: Rx Flow Control Mode Disabled */ #define GM_GPSR_PROM_EN (1<<1) /* Bit 1: Promiscuous Mode Enabled */ /* Bit 0: reserved */ - + /* GM_GP_CTRL 16 bit r/w General Purpose Control Register */ /* Bit 15: reserved */ #define GM_GPCR_PROM_ENA (1<<14) /* Bit 14: Enable Promiscuous Mode */ @@ -1636,20 +1636,20 @@ extern "C" { #define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100) #define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\ GM_GPCR_AU_SPD_DIS) - + /* GM_TX_CTRL 16 bit r/w Transmit Control Register */ #define GM_TXCR_FORCE_JAM (1<<15) /* Bit 15: Force Jam / Flow-Control */ #define GM_TXCR_CRC_DIS (1<<14) /* Bit 14: Disable insertion of CRC */ #define GM_TXCR_PAD_DIS (1<<13) /* Bit 13: Disable padding of packets */ #define GM_TXCR_COL_THR (4<<10) /* Bit 12..10: Collision Threshold */ - + /* GM_RX_CTRL 16 bit r/w Receive Control Register */ #define GM_RXCR_UCF_ENA (1<<15) /* Bit 15: Enable Unicast filtering */ #define GM_RXCR_MCF_ENA (1<<14) /* Bit 14: Enable Multicast filtering */ #define GM_RXCR_CRC_DIS (1<<13) /* Bit 13: Remove 4-byte CRC */ #define GM_RXCR_PASS_FC (1<<12) /* Bit 12: Pass FC packets to FIFO */ - + /* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */ #define GM_TXPA_JAMLEN_MSK (0x03<<14) /* Bit 15..14: Jam Length */ #define GM_TXPA_JAMIPG_MSK (0x1f<<9) /* Bit 13..9: Jam IPG */ @@ -1666,7 +1666,7 @@ extern "C" { #define GM_SMOD_JUMBO_ENA (1<<8) /* Bit 8: Enable Jumbo (Max. Frame Length) */ /* Bit 7..5: reserved */ #define GM_SMOD_IPG_MSK 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */ - + #define DATA_BLIND_VAL(x) SHIFT11(x) #define DATA_BLIND_FAST_ETH 0x1c #define DATA_BLIND_GIGABIT 4 @@ -1682,13 +1682,13 @@ extern "C" { #define GM_SMI_CT_RD_VAL (1<<4) /* Bit 4: Read Valid (Read completed) */ #define GM_SMI_CT_BUSY (1<<3) /* Bit 3: Busy (Operation in progress) */ /* Bit 2..0: reserved */ - + /* GM_PHY_ADDR 16 bit r/w GPHY Address Register */ /* Bit 15..6: reserved */ #define GM_PAR_MIB_CLR (1<<5) /* Bit 5: Set MIB Clear Counter Mode */ #define GM_PAR_MIB_TST (1<<4) /* Bit 4: MIB Load Counter (Test Mode) */ /* Bit 3..0: reserved */ - + /* Receive Frame Status Encoding */ #define GMR_FS_LEN (0xffffUL<<16) /* Bit 31..16: Rx Frame Length */ /* Bit 15..14: reserved */ diff --git a/drivers/sk98lin/skaddr.c b/drivers/sk98lin/skaddr.c index f2486032ee..ed79c049bb 100644 --- a/drivers/sk98lin/skaddr.c +++ b/drivers/sk98lin/skaddr.c @@ -29,170 +29,170 @@ * Revision 1.48 2003/02/12 17:09:37 tschilli * Fix in SkAddrOverride() to set both (physical and logical) MAC addresses * in case that both addresses are identical. - * + * * Revision 1.47 2002/09/17 06:31:10 tschilli * Handling of SK_PROM_MODE_ALL_MC flag in SkAddrGmacMcUpdate() * and SkAddrGmacPromiscuousChange() fixed. * Editorial changes. - * + * * Revision 1.46 2002/08/22 07:55:41 tschilli * New function SkGmacMcHash() for GMAC multicast hashing algorithm added. * Editorial changes. - * + * * Revision 1.45 2002/08/15 12:29:35 tschilli * SkAddrGmacMcUpdate() and SkAddrGmacPromiscuousChange() changed. - * + * * Revision 1.44 2002/08/14 12:18:03 rschmidt * Replaced direct handling of MAC Hashing (XMAC and GMAC) * with routine SkMacHashing(). * Replaced wrong 3rd para 'i' with 'PortNumber' in SkMacPromiscMode(). - * + * * Revision 1.43 2002/08/13 09:37:43 rschmidt * Corrected some SK_DBG_MSG outputs. * Replaced wrong 2nd para pAC with IoC in SkMacPromiscMode(). * Editorial changes. - * + * * Revision 1.42 2002/08/12 11:24:36 rschmidt * Remove setting of logical MAC address GM_SRC_ADDR_2 in SkAddrInit(). * Replaced direct handling of MAC Promiscuous Mode (XMAC and GMAC) * with routine SkMacPromiscMode(). * Editorial changes. - * + * * Revision 1.41 2002/06/10 13:52:18 tschilli * Changes for handling YUKON. * All changes are internally and not visible to the programmer * using this module. - * + * * Revision 1.40 2001/02/14 14:04:59 rassmann * Editorial changes. - * + * * Revision 1.39 2001/01/30 10:30:04 rassmann * Editorial changes. - * + * * Revision 1.38 2001/01/25 16:26:52 rassmann * Ensured that logical address overrides are done on net's active port. - * + * * Revision 1.37 2001/01/22 13:41:34 rassmann * Supporting two nets on dual-port adapters. - * + * * Revision 1.36 2000/08/07 11:10:39 rassmann * Editorial changes. - * + * * Revision 1.35 2000/05/04 09:38:41 rassmann * Editorial changes. * Corrected multicast address hashing. - * + * * Revision 1.34 1999/11/22 13:23:44 cgoos * Changed license header to GPL. - * + * * Revision 1.33 1999/05/28 10:56:06 rassmann * Editorial changes. - * + * * Revision 1.32 1999/03/31 10:59:20 rassmann * Returning Success instead of DupAddr if address shall be overridden * with same value. - * + * * Revision 1.31 1999/01/14 16:18:17 rassmann * Corrected multicast initialization. - * + * * Revision 1.30 1999/01/04 10:30:35 rassmann * SkAddrOverride only possible after SK_INIT_IO phase. - * + * * Revision 1.29 1998/12/29 13:13:10 rassmann * An address override is now preserved in the SK_INIT_IO phase. * All functions return an int now. * Extended parameter checking. - * + * * Revision 1.28 1998/12/01 11:45:53 rassmann * Code cleanup. - * + * * Revision 1.27 1998/12/01 09:22:49 rassmann * SkAddrMcAdd and SkAddrMcUpdate returned SK_MC_FILTERING_INEXACT * too often. - * + * * Revision 1.26 1998/11/24 12:39:44 rassmann * Reserved multicast entry for BPDU address. * 13 multicast entries left for protocol. - * + * * Revision 1.25 1998/11/17 16:54:23 rassmann * Using exact match for up to 14 multicast addresses. * Still receiving all multicasts if more addresses are added. - * + * * Revision 1.24 1998/11/13 17:24:31 rassmann * Changed return value of SkAddrOverride to int. - * + * * Revision 1.23 1998/11/13 16:56:18 rassmann * Added macro SK_ADDR_COMPARE. * Changed return type of SkAddrOverride to SK_BOOL. - * + * * Revision 1.22 1998/11/04 17:06:17 rassmann * Corrected McUpdate and PromiscuousChange functions. - * + * * Revision 1.21 1998/10/29 14:34:04 rassmann * Clearing SK_ADDR struct at startup. - * + * * Revision 1.20 1998/10/28 18:16:34 rassmann * Avoiding I/Os before SK_INIT_RUN level. * Aligning InexactFilter. - * + * * Revision 1.19 1998/10/28 11:29:28 rassmann * Programming physical address in SkAddrMcUpdate. * Corrected programming of exact match entries. - * + * * Revision 1.18 1998/10/28 10:34:48 rassmann * Corrected reading of physical addresses. - * + * * Revision 1.17 1998/10/28 10:26:13 rassmann * Getting ports' current MAC addresses from EPROM now. * Added debug output. - * + * * Revision 1.16 1998/10/27 16:20:12 rassmann * Reading MAC address byte by byte. - * + * * Revision 1.15 1998/10/22 11:39:09 rassmann * Corrected signed/unsigned mismatches. - * + * * Revision 1.14 1998/10/19 17:12:35 rassmann * Syntax corrections. - * + * * Revision 1.13 1998/10/19 17:02:19 rassmann * Now reading permanent MAC addresses from CRF. - * + * * Revision 1.12 1998/10/15 15:15:48 rassmann * Changed Flags Parameters from SK_U8 to int. * Checked with lint. - * + * * Revision 1.11 1998/09/24 19:15:12 rassmann * Code cleanup. - * + * * Revision 1.10 1998/09/18 20:18:54 rassmann * Added HW access. * Implemented swapping. - * + * * Revision 1.9 1998/09/16 11:32:00 rassmann * Including skdrv1st.h again. :( - * + * * Revision 1.8 1998/09/16 11:09:34 rassmann * Syntax corrections. - * + * * Revision 1.7 1998/09/14 17:06:34 rassmann * Minor changes. - * + * * Revision 1.6 1998/09/07 08:45:41 rassmann * Syntax corrections. - * + * * Revision 1.5 1998/09/04 19:40:19 rassmann * Interface enhancements. - * + * * Revision 1.4 1998/09/04 12:14:12 rassmann * Interface cleanup. - * + * * Revision 1.3 1998/09/02 16:56:40 rassmann * Updated interface. - * + * * Revision 1.2 1998/08/27 14:26:09 rassmann * Updated interface. - * + * * Revision 1.1 1998/08/21 08:30:22 rassmann * First public version. * @@ -322,7 +322,7 @@ int Level) /* initialization level */ for (i = 0; i < SK_MAX_MACS; i++) { pAPort = &pAC->Addr.Port[i]; pAPort->PromMode = SK_PROM_MODE_NONE; - + pAPort->FirstExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT; pAPort->FirstExactMatchDrv = SK_ADDR_FIRST_MATCH_DRV; pAPort->NextExactMatchRlmt = SK_ADDR_FIRST_MATCH_RLMT; @@ -351,7 +351,7 @@ int Level) /* initialization level */ } } #endif /* DEBUG */ - + /* Read permanent logical MAC address from Control Register File. */ for (j = 0; j < SK_MAC_ADDR_LEN; j++) { InAddr = (SK_U8 *) &pAC->Addr.Net[0].PermanentMacAddress.a[j]; @@ -392,7 +392,7 @@ int Level) /* initialization level */ pAC->Addr.Net[i].PermanentMacAddress.a[3], pAC->Addr.Net[i].PermanentMacAddress.a[4], pAC->Addr.Net[i].PermanentMacAddress.a[5])) - + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT, ("Logical MAC Address (Net%d): %02X %02X %02X %02X %02X %02X\n", i, @@ -426,7 +426,7 @@ int Level) /* initialization level */ /* Set port's current physical MAC address. */ OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0]; - + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { XM_OUTADDR(IoC, i, XM_SA, OutAddr); } @@ -442,7 +442,7 @@ int Level) /* initialization level */ pAPort->PermanentMacAddress.a[3], pAPort->PermanentMacAddress.a[4], pAPort->PermanentMacAddress.a[5])) - + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_INIT, ("SkAddrInit: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", pAPort->CurrentMacAddress.a[0], @@ -474,7 +474,7 @@ int Level) /* initialization level */ } return (SK_ADDR_SUCCESS); - + } /* SkAddrInit */ @@ -507,11 +507,11 @@ SK_U32 PortNumber, /* Index of affected port */ int Flags) /* permanent/non-perm, sw-only */ { int ReturnCode; - + if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { return (SK_ADDR_ILLEGAL_PORT); } - + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { ReturnCode = SkAddrXmacMcClear(pAC, IoC, PortNumber, Flags); } @@ -573,7 +573,7 @@ int Flags) /* permanent/non-perm, sw-only */ } return (SK_ADDR_SUCCESS); - + } /* SkAddrXmacMcClear */ @@ -622,31 +622,31 @@ int Flags) /* permanent/non-perm, sw-only */ for (i = 0; i < 8; i++) { pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0; } - + if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */ - + /* Copy DRV bits to InexactFilter. */ for (i = 0; i < 8; i++) { pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i]; - + /* Clear InexactRlmtFilter. */ pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i] = 0; - } + } } else { /* not permanent => DRV */ - + /* Copy RLMT bits to InexactFilter. */ for (i = 0; i < 8; i++) { pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[i]; - + /* Clear InexactDrvFilter. */ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[i] = 0; } } - + #ifdef DEBUG SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, ("GMAC InexactFilter (cleared): %02X %02X %02X %02X %02X %02X %02X %02X\n", @@ -659,11 +659,11 @@ int Flags) /* permanent/non-perm, sw-only */ pAC->Addr.Port[PortNumber].InexactFilter.Bytes[6], pAC->Addr.Port[PortNumber].InexactFilter.Bytes[7])) #endif /* DEBUG */ - + if (!(Flags & SK_MC_SW_ONLY)) { (void) SkAddrGmacMcUpdate(pAC, IoC, PortNumber); } - + return (SK_ADDR_SUCCESS); } /* SkAddrGmacMcClear */ @@ -738,7 +738,7 @@ unsigned char *pMc) /* Multicast address */ for (Byte = 0; Byte < 6; Byte++) { /* Get next byte. */ Data = (SK_U32) pMc[Byte]; - + /* Change bit order in byte. */ TmpData = Data; for (Bit = 0; Bit < 8; Bit++) { @@ -750,7 +750,7 @@ unsigned char *pMc) /* Multicast address */ } TmpData >>= 1; } - + Crc ^= (Data << 24); for (Bit = 0; Bit < 8; Bit++) { if (Crc & 0x80000000) { @@ -761,7 +761,7 @@ unsigned char *pMc) /* Multicast address */ } } } - + return (Crc & ((1 << HASH_BITS) - 1)); } /* SkGmacMcHash */ @@ -800,11 +800,11 @@ SK_MAC_ADDR *pMc, /* multicast address to be added */ int Flags) /* permanent/non-permanent */ { int ReturnCode; - + if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { return (SK_ADDR_ILLEGAL_PORT); } - + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { ReturnCode = SkAddrXmacMcAdd(pAC, IoC, PortNumber, pMc, Flags); } @@ -861,7 +861,7 @@ int Flags) /* permanent/non-permanent */ return (SK_MC_RLMT_OVERFLOW); } #endif /* DEBUG */ - + if (pAC->Addr.Port[PortNumber].NextExactMatchRlmt > SK_ADDR_LAST_MATCH_RLMT) { return (SK_MC_RLMT_OVERFLOW); @@ -882,7 +882,7 @@ int Flags) /* permanent/non-permanent */ return (SK_MC_RLMT_OVERFLOW); } #endif /* DEBUG */ - + if (pAC->Addr.Port[PortNumber].NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) { /* Set exact match entry. */ @@ -957,23 +957,23 @@ int Flags) /* permanent/non-permanent */ #ifndef SK_ADDR_CHEAT SK_U32 HashBit; #endif /* !defined(SK_ADDR_CHEAT) */ - + if (!(pMc->a[0] & SK_MC_BIT)) { /* Hashing only possible with multicast addresses. */ return (SK_MC_ILLEGAL_ADDRESS); } - + #ifndef SK_ADDR_CHEAT - + /* Compute hash value of address. */ HashBit = SkGmacMcHash(&pMc->a[0]); - + if (Flags & SK_ADDR_PERMANENT) { /* permanent => RLMT */ - + /* Add bit to InexactRlmtFilter. */ pAC->Addr.Port[PortNumber].InexactRlmtFilter.Bytes[HashBit / 8] |= 1 << (HashBit % 8); - + /* Copy bit to InexactFilter. */ for (i = 0; i < 8; i++) { pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= @@ -993,11 +993,11 @@ int Flags) /* permanent/non-permanent */ #endif /* DEBUG */ } else { /* not permanent => DRV */ - + /* Add bit to InexactDrvFilter. */ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[HashBit / 8] |= 1 << (HashBit % 8); - + /* Copy bit to InexactFilter. */ for (i = 0; i < 8; i++) { pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] |= @@ -1016,17 +1016,17 @@ int Flags) /* permanent/non-permanent */ pAC->Addr.Port[PortNumber].InexactDrvFilter.Bytes[7])) #endif /* DEBUG */ } - + #else /* SK_ADDR_CHEAT */ - + /* Set all bits in InexactFilter. */ for (i = 0; i < 8; i++) { pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i] = 0xFF; } #endif /* SK_ADDR_CHEAT */ - + return (SK_MC_FILTERING_INEXACT); - + } /* SkAddrGmacMcAdd */ @@ -1060,18 +1060,18 @@ SK_IOC IoC, /* I/O context */ SK_U32 PortNumber) /* Port Number */ { int ReturnCode; - + if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { return (SK_ADDR_ILLEGAL_PORT); } - + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { ReturnCode = SkAddrXmacMcUpdate(pAC, IoC, PortNumber); } else { ReturnCode = SkAddrGmacMcUpdate(pAC, IoC, PortNumber); } - + return (ReturnCode); } /* SkAddrMcUpdate */ @@ -1110,7 +1110,7 @@ SK_U32 PortNumber) /* Port Number */ SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, ("SkAddrXmacMcUpdate on Port %u.\n", PortNumber)) - + pAPort = &pAC->Addr.Port[PortNumber]; #ifdef DEBUG @@ -1127,7 +1127,7 @@ SK_U32 PortNumber) /* Port Number */ /* Clear other permanent exact match addresses on XMAC */ if (pAPort->NextExactMatchRlmt <= SK_ADDR_LAST_MATCH_RLMT) { - + SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchRlmt, SK_ADDR_LAST_MATCH_RLMT); } @@ -1139,7 +1139,7 @@ SK_U32 PortNumber) /* Port Number */ /* Clear other non-permanent exact match addresses on XMAC */ if (pAPort->NextExactMatchDrv <= SK_ADDR_LAST_MATCH_DRV) { - + SkXmClrExactAddr(pAC, IoC, PortNumber, pAPort->NextExactMatchDrv, SK_ADDR_LAST_MATCH_DRV); } @@ -1149,18 +1149,18 @@ SK_U32 PortNumber) /* Port Number */ } if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) { - + /* Set all bits in 64-bit hash register. */ XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash); - + /* Enable Hashing */ SkMacHashing(pAC, IoC, PortNumber, SK_TRUE); } else if (Inexact != 0) { - + /* Set 64-bit hash register to InexactFilter. */ XM_OUTHASH(IoC, PortNumber, XM_HSM, &pAPort->InexactFilter.Bytes[0]); - + /* Enable Hashing */ SkMacHashing(pAC, IoC, PortNumber, SK_TRUE); } @@ -1175,7 +1175,7 @@ SK_U32 PortNumber) /* Port Number */ /* Set port's current physical MAC address. */ OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0]; - + XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr); #ifdef xDEBUG @@ -1185,9 +1185,9 @@ SK_U32 PortNumber) /* Port Number */ /* Get exact match address i from port PortNumber. */ InAddr = (SK_U16 *) &InAddr8[0]; - + XM_INADDR(IoC, PortNumber, XM_EXM(i), InAddr); - + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, ("SkAddrXmacMcUpdate: MC address %d on Port %u: ", "%02x %02x %02x %02x %02x %02x -- %02x %02x %02x %02x %02x %02x\n", @@ -1206,7 +1206,7 @@ SK_U32 PortNumber) /* Port Number */ pAPort->Exact[i].a[4], pAPort->Exact[i].a[5])) } -#endif /* DEBUG */ +#endif /* DEBUG */ /* Determine return value. */ if (Inexact == 0 && pAPort->PromMode == 0) { @@ -1215,7 +1215,7 @@ SK_U32 PortNumber) /* Port Number */ else { return (SK_MC_FILTERING_INEXACT); } - + } /* SkAddrXmacMcUpdate */ @@ -1252,47 +1252,47 @@ SK_U32 PortNumber) /* Port Number */ SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, ("SkAddrGmacMcUpdate on Port %u.\n", PortNumber)) - + pAPort = &pAC->Addr.Port[PortNumber]; #ifdef DEBUG SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, ("Next0 on Port %d: %d\n", PortNumber, Next0[PortNumber])) #endif /* DEBUG */ - + for (Inexact = 0, i = 0; i < 8; i++) { Inexact |= pAPort->InexactFilter.Bytes[i]; } - + /* Set 64-bit hash register to InexactFilter. */ GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &pAPort->InexactFilter.Bytes[0]); - - if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) { - + + if (pAPort->PromMode & SK_PROM_MODE_ALL_MC) { + /* Set all bits in 64-bit hash register. */ GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash); - + /* Enable Hashing */ SkMacHashing(pAC, IoC, PortNumber, SK_TRUE); } - else { + else { /* Enable Hashing. */ SkMacHashing(pAC, IoC, PortNumber, SK_TRUE); } - + if (pAPort->PromMode != SK_PROM_MODE_NONE) { (void) SkAddrGmacPromiscuousChange(pAC, IoC, PortNumber, pAPort->PromMode); } - + /* Set port's current physical MAC address. */ OutAddr = (SK_U16 *) &pAPort->CurrentMacAddress.a[0]; GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_1L, OutAddr); - + /* Set port's current logical MAC address. */ OutAddr = (SK_U16 *) &pAPort->Exact[0].a[0]; GM_OUTADDR(IoC, PortNumber, GM_SRC_ADDR_2L, OutAddr); - + #ifdef DEBUG SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, ("SkAddrGmacMcUpdate: Permanent Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", @@ -1302,7 +1302,7 @@ SK_U32 PortNumber) /* Port Number */ pAPort->Exact[0].a[3], pAPort->Exact[0].a[4], pAPort->Exact[0].a[5])) - + SK_DBG_MSG(pAC, SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, ("SkAddrGmacMcUpdate: Physical MAC Address: %02X %02X %02X %02X %02X %02X\n", pAPort->CurrentMacAddress.a[0], @@ -1312,7 +1312,7 @@ SK_U32 PortNumber) /* Port Number */ pAPort->CurrentMacAddress.a[4], pAPort->CurrentMacAddress.a[5])) #endif /* DEBUG */ - + /* Determine return value. */ if (Inexact == 0 && pAPort->PromMode == 0) { return (SK_MC_FILTERING_EXACT); @@ -1320,7 +1320,7 @@ SK_U32 PortNumber) /* Port Number */ else { return (SK_MC_FILTERING_INEXACT); } - + } /* SkAddrGmacMcUpdate */ @@ -1433,7 +1433,7 @@ int Flags) /* logical/physical MAC address */ /* Change port's physical MAC address. */ OutAddr = (SK_U16 *) pNewAddr; - + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { XM_OUTADDR(IoC, PortNumber, XM_SA, OutAddr); } @@ -1451,7 +1451,7 @@ int Flags) /* logical/physical MAC address */ pAC->Addr.Net[NetNumber].CurrentMacAddress.a)) { return (SK_ADDR_SUCCESS); } - + for (i = 0; i < (SK_U32) pAC->GIni.GIMacsFound; i++) { if (!pAC->Addr.Port[i].CurrentMacAddressSet) { return (SK_ADDR_TOO_EARLY); @@ -1462,7 +1462,7 @@ int Flags) /* logical/physical MAC address */ return (SK_ADDR_DUPLICATE_ADDRESS); } } - + /* * In case that the physical and the logical MAC addresses are equal * we must also change the physical MAC address here. @@ -1471,17 +1471,17 @@ int Flags) /* logical/physical MAC address */ */ if (SK_ADDR_EQUAL(pAC->Addr.Port[PortNumber].CurrentMacAddress.a, pAC->Addr.Port[PortNumber].Exact[0].a)) { - + pAC->Addr.Port[PortNumber].PreviousMacAddress = pAC->Addr.Port[PortNumber].CurrentMacAddress; pAC->Addr.Port[PortNumber].CurrentMacAddress = *pNewAddr; - + /* Report address change to RLMT. */ Para.Para32[0] = PortNumber; Para.Para32[0] = -1; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_PORT_ADDR, Para); } - + /* Set PortNumber to number of net's active port. */ PortNumber = pAC->Rlmt.Net[NetNumber]. Port[pAC->Addr.Net[NetNumber].ActivePort]->PortNumber; @@ -1497,7 +1497,7 @@ int Flags) /* logical/physical MAC address */ pAC->Addr.Net[NetNumber].PermanentMacAddress.a[3], pAC->Addr.Net[NetNumber].PermanentMacAddress.a[4], pAC->Addr.Net[NetNumber].PermanentMacAddress.a[5])) - + SK_DBG_MSG(pAC,SK_DBGMOD_ADDR, SK_DBGCAT_CTRL, ("SkAddrOverride: New logical MAC Address: %02X %02X %02X %02X %02X %02X\n", pAC->Addr.Net[NetNumber].CurrentMacAddress.a[0], @@ -1508,12 +1508,12 @@ int Flags) /* logical/physical MAC address */ pAC->Addr.Net[NetNumber].CurrentMacAddress.a[5])) #endif /* DEBUG */ - /* Write address to first exact match entry of active port. */ + /* Write address to first exact match entry of active port. */ (void) SkAddrMcUpdate(pAC, IoC, PortNumber); } return (SK_ADDR_SUCCESS); - + } /* SkAddrOverride */ @@ -1546,11 +1546,11 @@ SK_U32 PortNumber, /* port whose promiscuous mode changes */ int NewPromMode) /* new promiscuous mode */ { int ReturnCode; - + if (PortNumber >= (SK_U32) pAC->GIni.GIMacsFound) { return (SK_ADDR_ILLEGAL_PORT); } - + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { ReturnCode = SkAddrXmacPromiscuousChange(pAC, IoC, PortNumber, NewPromMode); } @@ -1602,7 +1602,7 @@ int NewPromMode) /* new promiscuous mode */ /* Promiscuous mode! */ CurPromMode |= SK_PROM_MODE_LLC; } - + for (Inexact = 0xFF, i = 0; i < 8; i++) { Inexact &= pAC->Addr.Port[PortNumber].InexactFilter.Bytes[i]; } @@ -1612,7 +1612,7 @@ int NewPromMode) /* new promiscuous mode */ else { /* Get InexactModeBit (bit XM_MD_ENA_HASH in mode register) */ XM_IN16(IoC, PortNumber, XM_MODE, &LoMode); - + InexactModeBit = (LoMode & XM_MD_ENA_HASH) != 0; /* Read 64-bit hash register from XMAC */ @@ -1635,7 +1635,7 @@ int NewPromMode) /* new promiscuous mode */ if ((NewPromMode & SK_PROM_MODE_ALL_MC) && !(CurPromMode & SK_PROM_MODE_ALL_MC)) { /* All MC. */ - + /* Set all bits in 64-bit hash register. */ XM_OUTHASH(IoC, PortNumber, XM_HSM, &OnesHash); @@ -1671,9 +1671,9 @@ int NewPromMode) /* new promiscuous mode */ /* Clear Promiscuous Mode */ SkMacPromiscMode(pAC, IoC, PortNumber, SK_FALSE); } - + return (SK_ADDR_SUCCESS); - + } /* SkAddrXmacPromiscuousChange */ @@ -1722,17 +1722,17 @@ int NewPromMode) /* new promiscuous mode */ if (NewPromMode == CurPromMode) { return (SK_ADDR_SUCCESS); } - + if ((NewPromMode & SK_PROM_MODE_ALL_MC) && !(CurPromMode & SK_PROM_MODE_ALL_MC)) { /* All MC */ - + /* Set all bits in 64-bit hash register. */ GM_OUTHASH(IoC, PortNumber, GM_MC_ADDR_H1, &OnesHash); - + /* Enable Hashing */ SkMacHashing(pAC, IoC, PortNumber, SK_TRUE); } - + if ((CurPromMode & SK_PROM_MODE_ALL_MC) && !(NewPromMode & SK_PROM_MODE_ALL_MC)) { /* Norm. MC */ @@ -1746,19 +1746,19 @@ int NewPromMode) /* new promiscuous mode */ if ((NewPromMode & SK_PROM_MODE_LLC) && !(CurPromMode & SK_PROM_MODE_LLC)) { /* Prom. LLC */ - + /* Set the MAC to Promiscuous Mode. */ SkMacPromiscMode(pAC, IoC, PortNumber, SK_TRUE); } else if ((CurPromMode & SK_PROM_MODE_LLC) && !(NewPromMode & SK_PROM_MODE_LLC)) { /* Norm. LLC */ - + /* Clear Promiscuous Mode. */ SkMacPromiscMode(pAC, IoC, PortNumber, SK_FALSE); } return (SK_ADDR_SUCCESS); - + } /* SkAddrGmacPromiscuousChange */ @@ -1827,33 +1827,33 @@ SK_U32 ToPortNumber) /* Port2 Index */ pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i]; pAC->Addr.Port[ToPortNumber].InexactFilter.Bytes[i] = Byte; } - + i = pAC->Addr.Port[FromPortNumber].PromMode; pAC->Addr.Port[FromPortNumber].PromMode = pAC->Addr.Port[ToPortNumber].PromMode; pAC->Addr.Port[ToPortNumber].PromMode = i; - + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt; pAC->Addr.Port[FromPortNumber].FirstExactMatchRlmt = pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt; pAC->Addr.Port[ToPortNumber].FirstExactMatchRlmt = DWord; - + DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt; pAC->Addr.Port[FromPortNumber].NextExactMatchRlmt = pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt; pAC->Addr.Port[ToPortNumber].NextExactMatchRlmt = DWord; - + DWord = pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv; pAC->Addr.Port[FromPortNumber].FirstExactMatchDrv = pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv; pAC->Addr.Port[ToPortNumber].FirstExactMatchDrv = DWord; - + DWord = pAC->Addr.Port[FromPortNumber].NextExactMatchDrv; pAC->Addr.Port[FromPortNumber].NextExactMatchDrv = pAC->Addr.Port[ToPortNumber].NextExactMatchDrv; pAC->Addr.Port[ToPortNumber].NextExactMatchDrv = DWord; } - + /* CAUTION: Solution works if only ports of one adapter are in use. */ for (i = 0; (SK_U32) i < pAC->Rlmt.Net[pAC->Rlmt.Port[ToPortNumber]. Net->NetNumber].NumPorts; i++) { @@ -1864,12 +1864,12 @@ SK_U32 ToPortNumber) /* Port2 Index */ /* 20001207 RA: Was "ToPortNumber;". */ } } - + (void) SkAddrMcUpdate(pAC, IoC, FromPortNumber); (void) SkAddrMcUpdate(pAC, IoC, ToPortNumber); return (SK_ADDR_SUCCESS); - + } /* SkAddrSwap */ #ifdef __cplusplus diff --git a/drivers/sk98lin/skcsum.c b/drivers/sk98lin/skcsum.c index 0fd70301b6..a5dc572587 100644 --- a/drivers/sk98lin/skcsum.c +++ b/drivers/sk98lin/skcsum.c @@ -30,39 +30,39 @@ * Fix in SkCsGetSendInfo(): * - function did not return ProtocolFlags in every case. * - pseudo header csum calculated wrong for big endian. - * + * * Revision 1.9 2001/06/13 07:42:08 gklug * fix: NetNumber was wrong in CLEAR_STAT event * add: check for good NetNumber in Clear STAT - * + * * Revision 1.8 2001/02/06 11:15:36 rassmann * Supporting two nets on dual-port adapters. - * + * * Revision 1.7 2000/06/29 13:17:05 rassmann * Corrected reception of a packet with UDP checksum == 0 (which means there * is no UDP checksum). - * + * * Revision 1.6 2000/02/21 12:35:10 cgoos * Fixed license header comment. - * + * * Revision 1.5 2000/02/21 11:05:19 cgoos * Merged changes back to common source. * Fixed rx path for BIG ENDIAN architecture. - * + * * Revision 1.1 1999/07/26 15:28:12 mkarl * added return SKCS_STATUS_IP_CSUM_ERROR_UDP and * SKCS_STATUS_IP_CSUM_ERROR_TCP to pass the NidsTester * changed from common source to windows specific source * therefore restarting with v1.0 - * + * * Revision 1.3 1999/05/10 08:39:33 mkarl * prevent overflows in SKCS_HTON16 * fixed a bug in pseudo header checksum calculation * added some comments - * + * * Revision 1.2 1998/10/22 11:53:28 swolf * Now using SK_DBG_MSG. - * + * * Revision 1.1 1998/09/01 15:35:41 swolf * initial revision * @@ -427,7 +427,7 @@ int NetNumber) /* Net number */ SKCS_OFS_IP_DESTINATION_ADDRESS + 2) + (unsigned long) SKCS_HTON16(NextLevelProtocol) + (unsigned long) SKCS_HTON16(IpDataLength); - + /* Add-in any carries. */ SKCS_OC_ADD(PseudoHeaderChecksum, PseudoHeaderChecksum, 0); @@ -602,9 +602,9 @@ int NetNumber) /* Net number */ * us to check upper-layer checksums, because we cannot do any further * processing of the packet without a valid IP checksum. */ - + /* Get the next level protocol identifier. */ - + NextLevelProtocol = *(SK_U8 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL); @@ -680,7 +680,7 @@ int NetNumber) /* Net number */ *(SK_U16*)SKCS_IDX(pIpHeader, IpHeaderLength + 6) == 0x0000) { NextLevelProtoStats->RxOkCts++; - + return (SKCS_STATUS_IP_CSUM_OK_NO_UDP); } @@ -735,7 +735,7 @@ int NetNumber) /* Net number */ return (NextLevelProtocol == SKCS_PROTO_ID_TCP ? SKCS_STATUS_TCP_CSUM_OK : SKCS_STATUS_UDP_CSUM_OK); } - + /* TCP/UDP checksum error. */ NextLevelProtoStats->RxErrCts++; diff --git a/drivers/sk98lin/skge.c b/drivers/sk98lin/skge.c index 01a72e13cb..ff7e2af779 100644 --- a/drivers/sk98lin/skge.c +++ b/drivers/sk98lin/skge.c @@ -7,7 +7,7 @@ * Purpose: The main driver source module * ******************************************************************************/ - + /****************************************************************************** * * (C)Copyright 1998-2003 SysKonnect GmbH. @@ -31,7 +31,7 @@ * SK-9843 (single link 1000Base-SX V2) * SK-9821 (single link 1000Base-T V2) * - * Created 10-Feb-1999, based on Linux' acenic.c, 3c59x.c and + * Created 10-Feb-1999, based on Linux' acenic.c, 3c59x.c and * SysKonnects GEnesis Solaris driver * Author: Christoph Goos (cgoos@syskonnect.de) * Mirko Lindner (mlindner@syskonnect.de) @@ -41,7 +41,7 @@ * The technical manual for the adapters is available from SysKonnect's * web pages: www.syskonnect.com * Goto "Support" and search Knowledge Base for "manual". - * + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -58,25 +58,25 @@ * $Log: skge.c,v $ * Revision 1.46 2003/02/25 14:16:36 mlindner * Fix: Copyright statement - * + * * Revision 1.45 2003/02/25 13:25:55 mlindner * Add: Performance improvements * Add: Support for various vendors * Fix: Init function - * + * * Revision 1.44 2003/01/09 09:25:26 mlindner * Fix: Remove useless init_module/cleanup_module forward declarations - * + * * Revision 1.43 2002/11/29 08:42:41 mlindner * Fix: Boot message - * + * * Revision 1.42 2002/11/28 13:30:23 mlindner * Add: New frame check - * + * * Revision 1.41 2002/11/27 13:55:18 mlindner * Fix: Drop wrong csum packets * Fix: Initialize proc_entry after hw check - * + * * Revision 1.40 2002/10/31 07:50:37 tschilli * Function SkGeInitAssignRamToQueues() from common module inserted. * Autonegotiation is set to ON for all adapters. @@ -84,7 +84,7 @@ * Role parameter will show up for 1000 Mbps links only. * GetConfiguration() inserted after init level 1 in SkGeChangeMtu(). * All return values of SkGeInit() and SkGeInitPort() are checked. - * + * * Revision 1.39 2002/10/02 12:56:05 mlindner * Add: Support for Yukon * Add: Support for ZEROCOPY, scatter-gather and hw checksum @@ -96,64 +96,64 @@ * Add: Frame length check * Fix: Transmit complete interrupt * Fix: Interrupt moderation - * + * * Revision 1.29.2.13 2002/01/14 12:44:52 mlindner * Fix: Rlmt modes - * + * * Revision 1.29.2.12 2001/12/07 12:06:18 mlindner * Fix: malloc -> slab changes - * + * * Revision 1.29.2.11 2001/12/06 15:19:20 mlindner * Add: DMA attributes * Fix: Module initialisation * Fix: pci_map_single and pci_unmap_single replaced - * + * * Revision 1.29.2.10 2001/12/06 09:56:50 mlindner * Corrected some printk's - * + * * Revision 1.29.2.9 2001/09/05 12:15:34 mlindner * Add: LBFO Changes * Fix: Counter Errors (Jumbo == to long errors) * Fix: Changed pAC->PciDev declaration * Fix: too short counters - * + * * Revision 1.29.2.8 2001/06/25 12:10:44 mlindner * fix: ReceiveIrq() changed. - * + * * Revision 1.29.2.7 2001/06/25 08:07:05 mlindner * fix: RLMT locking in ReceiveIrq() changed. - * + * * Revision 1.29.2.6 2001/05/21 07:59:29 mlindner * fix: MTU init problems - * + * * Revision 1.29.2.5 2001/05/08 11:25:08 mlindner * fix: removed VLAN error message - * + * * Revision 1.29.2.4 2001/05/04 13:31:43 gklug * fix: do not handle eth_copy on bad fragments received. - * + * * Revision 1.29.2.3 2001/04/23 08:06:43 mlindner * Fix: error handling - * + * * Revision 1.29.2.2 2001/03/15 12:04:54 mlindner * Fixed memory problem - * + * * Revision 1.29.2.1 2001/03/12 16:41:44 mlindner * add: procfs function * add: dual-net function * add: RLMT networks * add: extended PNMI features - * + * * Kernel 2.4.x specific: * Revision 1.xx 2000/09/12 13:31:56 cgoos * Fixed missign "dev=NULL in skge_probe. * Added counting for jumbo frames (corrects error statistic). * Removed VLAN tag check (enables VLAN support). - * + * * Kernel 2.2.x specific: * Revision 1.29 2000/02/21 13:31:56 cgoos * Fixed "unused" warning for UltraSPARC change. - * + * * Partially kernel 2.2.x specific: * Revision 1.28 2000/02/21 10:32:36 cgoos * Added fixes for UltraSPARC. @@ -161,40 +161,40 @@ * Changed XmitFrame return value. * Fixed rx checksum calculation for BIG ENDIAN systems. * Fixed rx jumbo frames counted as ierrors. - * - * + * + * * Revision 1.27 1999/11/25 09:06:28 cgoos * Changed base_addr to unsigned long. - * + * * Revision 1.26 1999/11/22 13:29:16 cgoos * Changed license header to GPL. * Changes for inclusion in linux kernel (2.2.13). * Removed 2.0.x defines. * Changed SkGeProbe to skge_probe. * Added checks in SkGeIoctl. - * + * * Revision 1.25 1999/10/07 14:47:52 cgoos * Changed 984x to 98xx. - * + * * Revision 1.24 1999/09/30 07:21:01 cgoos * Removed SK_RLMT_SLOW_LOOKAHEAD option. * Giving spanning tree packets also to OS now. - * + * * Revision 1.23 1999/09/29 07:36:50 cgoos * Changed assignment for IsBc/IsMc. - * + * * Revision 1.22 1999/09/28 12:57:09 cgoos * Added CheckQueue also to Single-Port-ISR. - * + * * Revision 1.21 1999/09/28 12:42:41 cgoos * Changed parameter strings for RlmtMode. - * + * * Revision 1.20 1999/09/28 12:37:57 cgoos * Added CheckQueue for fast delivery of RLMT frames. - * + * * Revision 1.19 1999/09/16 07:57:25 cgoos * Copperfield changes. - * + * * Revision 1.18 1999/09/03 13:06:30 cgoos * Fixed RlmtMode=CheckSeg bug: wrong DEV_KFREE_SKB in RLMT_SEND caused * double allocated skb's. @@ -202,69 +202,69 @@ * Queue size for async. standby Tx queue was zero. * FillRxLimit of 0 could cause problems with ReQueue, changed to 1. * Removed debug output of checksum statistic. - * + * * Revision 1.17 1999/08/11 13:55:27 cgoos * Transmit descriptor polling was not reenabled after SkGePortInit. - * + * * Revision 1.16 1999/07/27 15:17:29 cgoos * Added some "\n" in output strings (removed while debuging...). - * + * * Revision 1.15 1999/07/23 12:09:30 cgoos * Performance optimization, rx checksumming, large frame support. - * + * * Revision 1.14 1999/07/14 11:26:27 cgoos * Removed Link LED settings (now in RLMT). * Added status output at NET UP. * Fixed SMP problems with Tx and SWITCH running in parallel. * Fixed return code problem at RLMT_SEND event. - * + * * Revision 1.13 1999/04/07 10:11:42 cgoos * Fixed Single Port problems. * Fixed Multi-Adapter problems. * Always display startup string. - * + * * Revision 1.12 1999/03/29 12:26:37 cgoos * Reversed locking to fine granularity. * Fixed skb double alloc problem (caused by incorrect xmit return code). * Enhanced function descriptions. - * + * * Revision 1.11 1999/03/15 13:10:51 cgoos * Changed device identifier in output string to ethX. - * + * * Revision 1.10 1999/03/15 12:12:34 cgoos * Changed copyright notice. - * + * * Revision 1.9 1999/03/15 12:10:17 cgoos * Changed locking to one driver lock. * Added check of SK_AC-size (for consistency with library). - * + * * Revision 1.8 1999/03/08 11:44:02 cgoos * Fixed missing dev->tbusy in SkGeXmit. * Changed large frame (jumbo) buffer number. * Added copying of short frames. - * + * * Revision 1.7 1999/03/04 13:26:57 cgoos * Fixed spinlock calls for SMP. - * + * * Revision 1.6 1999/03/02 09:53:51 cgoos * Added descriptor revertion for big endian machines. - * + * * Revision 1.5 1999/03/01 08:50:59 cgoos * Fixed SkGeChangeMtu. * Fixed pci config space accesses. - * + * * Revision 1.4 1999/02/18 15:48:44 cgoos * Corrected some printk's. - * + * * Revision 1.3 1999/02/18 12:45:55 cgoos * Changed SK_MAX_CARD_PARAM to default 16 - * + * * Revision 1.2 1999/02/18 10:55:32 cgoos * Removed SkGeDrvTimeStamp function. * Printing "ethX:" before adapter type at adapter init. - * * - * 10-Feb-1999 cg Created, based on Linux' acenic.c, 3c59x.c and + * + * 10-Feb-1999 cg Created, based on Linux' acenic.c, 3c59x.c and * SysKonnects GEnesis Solaris driver * ******************************************************************************/ @@ -273,17 +273,17 @@ * * Possible compiler options (#define xxx / -Dxxx): * - * debugging can be enable by changing SK_DEBUG_CHKMOD and + * debugging can be enable by changing SK_DEBUG_CHKMOD and * SK_DEBUG_CHKCAT in makefile (described there). * ******************************************************************************/ - + /****************************************************************************** * * Description: * * This is the main module of the Linux GE driver. - * + * * All source files except skge.c, skdrv1st.h, skdrv2nd.h and sktypes.h * are part of SysKonnect's COMMON MODULES for the SK-98xx adapters. * Those are used for drivers on multiple OS', so some thing may seem @@ -381,21 +381,21 @@ /* - * use those defines for a compile-in version of the driver instead + * use those defines for a compile-in version of the driver instead * of command line parameters */ -// #define LINK_SPEED_A {"Auto", } -// #define LINK_SPEED_B {"Auto", } -// #define AUTO_NEG_A {"Sense", } -// #define AUTO_NEG_B {"Sense", } -// #define DUP_CAP_A {"Both", } -// #define DUP_CAP_B {"Both", } -// #define FLOW_CTRL_A {"SymOrRem", } -// #define FLOW_CTRL_B {"SymOrRem", } -// #define ROLE_A {"Auto", } -// #define ROLE_B {"Auto", } -// #define PREF_PORT {"A", } -// #define RLMT_MODE {"CheckLinkState", } +/* #define LINK_SPEED_A {"Auto", } */ +/* #define LINK_SPEED_B {"Auto", } */ +/* #define AUTO_NEG_A {"Sense", } */ +/* #define AUTO_NEG_B {"Sense", } */ +/* #define DUP_CAP_A {"Both", } */ +/* #define DUP_CAP_B {"Both", } */ +/* #define FLOW_CTRL_A {"SymOrRem", } */ +/* #define FLOW_CTRL_B {"SymOrRem", } */ +/* #define ROLE_A {"Auto", } */ +/* #define ROLE_B {"Auto", } */ +/* #define PREF_PORT {"A", } */ +/* #define RLMT_MODE {"CheckLinkState", } */ #define DEV_KFREE_SKB(skb) dev_kfree_skb(skb) #define DEV_KFREE_SKB_IRQ(skb) dev_kfree_skb_irq(skb) @@ -567,8 +567,8 @@ int skge_probe (struct eth_device ** ret_dev) continue; #endif -/* if ((pdev->vendor != PCI_VENDOR_ID_SYSKONNECT) && - ((pdev->device != PCI_DEVICE_ID_SYSKONNECT_GE) || +/* if ((pdev->vendor != PCI_VENDOR_ID_SYSKONNECT) && + ((pdev->device != PCI_DEVICE_ID_SYSKONNECT_GE) || (pdev->device != PCI_DEVICE_ID_SYSKONNECT_YU))){ continue; } @@ -668,10 +668,10 @@ int skge_probe (struct eth_device ** ret_dev) base_address = pci_resource_start (pdev, 0); #else pci_write_config_dword(devno, - PCI_COMMAND, - PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + PCI_COMMAND, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); pci_read_config_dword (devno, PCI_BASE_ADDRESS_0, - &base_address); + &base_address); #endif #ifdef SK_BIG_ENDIAN @@ -737,13 +737,12 @@ int skge_probe (struct eth_device ** ret_dev) } - /* Create proc file */ pProcFile = create_proc_entry(dev->name, S_IFREG | S_IXUSR | S_IWGRP | S_IROTH, pSkRootDir); - + pProcFile->read_proc = proc_read; pProcFile->write_proc = NULL; pProcFile->nlink = 1; @@ -809,7 +808,7 @@ int skge_probe (struct eth_device ** ret_dev) S_IFREG | S_IXUSR | S_IWGRP | S_IROTH, pSkRootDir); - + pProcFile->read_proc = proc_read; pProcFile->write_proc = NULL; pProcFile->nlink = 1; @@ -824,7 +823,7 @@ int skge_probe (struct eth_device ** ret_dev) memcpy((caddr_t) &dev->enetaddr, (caddr_t) &pAC->Addr.Net[1].CurrentMacAddress, 6); #endif - + printk("%s: %s\n", dev->name, pAC->DeviceStr); printk(" PrefPort:B RlmtMode:Dual Check Link State\n"); @@ -865,7 +864,7 @@ int skge_probe (struct eth_device ** ret_dev) * frees the desriptor ring. * * Returns: N/A - * + * */ static void FreeResources(struct SK_NET_DEVICE *dev) { @@ -889,7 +888,7 @@ SK_AC *pAC; BoardFreeMem(pAC); } } - + } /* FreeResources */ #if 0 @@ -1006,7 +1005,7 @@ static int __init skge_init_module(void) { int cards; SkGeRootDev = NULL; - + /* just to avoid warnings ... */ debug = 0; options[0] = 0; @@ -1057,7 +1056,7 @@ SK_EVPARA EvPara; SkEventDispatcher(pAC, pAC->IoBase); /* disable interrupts */ SK_OUT32(pAC->IoBase, B0_IMSK, 0); - SkGeDeInit(pAC, pAC->IoBase); + SkGeDeInit(pAC, pAC->IoBase); spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); pAC->BoardLevel = 0; /* We do NOT check here, if IRQ was pending, of course*/ @@ -1065,7 +1064,7 @@ SK_EVPARA EvPara; if(pAC->BoardLevel == 1) { /* board is still alive */ - SkGeDeInit(pAC, pAC->IoBase); + SkGeDeInit(pAC, pAC->IoBase); pAC->BoardLevel = 0; } @@ -1077,7 +1076,7 @@ SK_EVPARA EvPara; FreeResources(SkGeRootDev); SkGeRootDev->get_stats = NULL; - /* + /* * otherwise unregister_netdev calls get_stats with * invalid IO ... :-( */ @@ -1138,7 +1137,7 @@ SK_BOOL DualNet; spin_lock_init(&pAC->SlowPathLock); /* level 0 init common modules here */ - + spin_lock_irqsave(&pAC->SlowPathLock, Flags); /* Does a RESET on board ...*/ if (SkGeInit(pAC, pAC->IoBase, 0) != 0) { @@ -1152,7 +1151,7 @@ SK_BOOL DualNet; SkAddrInit( pAC, pAC->IoBase, 0); SkRlmtInit( pAC, pAC->IoBase, 0); SkTimerInit(pAC, pAC->IoBase, 0); - + pAC->BoardLevel = 0; pAC->RxBufSize = ETH_BUF_SIZE; @@ -1206,7 +1205,7 @@ SK_BOOL DualNet; /* Alloc memory for this board (Mem for RxD/TxD) : */ if(!BoardAllocMem(pAC)) { printk("No memory for descriptor rings.\n"); - return(-EAGAIN); + return(-EAGAIN); } SkCsSetReceiveFlags(pAC, @@ -1223,7 +1222,7 @@ SK_BOOL DualNet; if (pAC->RlmtNets == 2) { DualNet = SK_TRUE; } - + if (SkGeInitAssignRamToQueues( pAC, pAC->ActivePort, @@ -1243,9 +1242,9 @@ SK_BOOL DualNet; printk(" PrefPort:%c RlmtMode:%s\n", 'A' + pAC->Rlmt.Net[0].Port[pAC->Rlmt.Net[0].PrefPort]->PortNumber, (pAC->RlmtMode==0) ? "Check Link State" : - ((pAC->RlmtMode==1) ? "Check Link State" : - ((pAC->RlmtMode==3) ? "Check Local Port" : - ((pAC->RlmtMode==7) ? "Check Segmentation" : + ((pAC->RlmtMode==1) ? "Check Link State" : + ((pAC->RlmtMode==3) ? "Check Local Port" : + ((pAC->RlmtMode==7) ? "Check Segmentation" : ((pAC->RlmtMode==17) ? "Dual Check Link State" :"Error"))))); #endif @@ -1283,7 +1282,7 @@ size_t AllocLength; /* length of complete descriptor area */ int i; /* loop counter */ unsigned long BusAddr; - + /* rings plus one for alignment (do not cross 4 GB boundary) */ /* RX_RING_SIZE is assumed bigger than TX_RING_SIZE */ #if (BITS_PER_LONG == 32) @@ -1314,7 +1313,7 @@ unsigned long BusAddr; pAC->TxPort[i][0].VTxDescrRing = BusAddr; pDescrMem += TX_RING_SIZE; BusAddr += TX_RING_SIZE; - + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, ("RX%d: pDescrMem: %lX, PhysDescrMem: %lX\n", i, (unsigned long) pDescrMem, @@ -1324,7 +1323,7 @@ unsigned long BusAddr; pDescrMem += RX_RING_SIZE; BusAddr += RX_RING_SIZE; } /* for */ - + return (SK_TRUE); } /* BoardAllocMem */ @@ -1383,7 +1382,7 @@ int TxDescrSize; /* the size of a tx descriptor rounded up to alignment*/ pAC->RxDescrPerRing = RX_RING_SIZE / RxDescrSize; TxDescrSize = (((sizeof(TXD) - 1) / DESCR_ALIGN) + 1) * DESCR_ALIGN; pAC->TxDescrPerRing = TX_RING_SIZE / RxDescrSize; - + for (i=0; i<pAC->GIni.GIMacsFound; i++) { SetupRing( pAC, @@ -1445,11 +1444,11 @@ uintptr_t VNextDescr; /* the virtual bus address of the next descriptor */ DESCR_ALIGN; DescrNum = RX_RING_SIZE / DescrSize; } - + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, ("Descriptor size: %d Descriptor Number: %d\n", DescrSize,DescrNum)); - + pDescr = (RXD*) pMemArea; pPrevDescr = NULL; pNextDescr = (RXD*) (((char*)pDescr) + DescrSize); @@ -1541,11 +1540,11 @@ void SkGeIsr(int irq, void *dev_id, struct pt_regs *ptregs) struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id; DEV_NET *pNet; SK_AC *pAC; -SK_U32 IntSrc; /* interrupts source register contents */ +SK_U32 IntSrc; /* interrupts source register contents */ pNet = (DEV_NET*) dev->priv; pAC = pNet->pAC; - + /* * Check and process if its our interrupt */ @@ -1645,7 +1644,7 @@ SK_U32 IntSrc; /* interrupts source register contents */ spin_unlock(&pAC->SlowPathLock); } /* - * do it all again is case we cleared an interrupt that + * do it all again is case we cleared an interrupt that * came in after handling the ring (OUTs may be delayed * in hardware buffers, but are through after IN) */ @@ -1690,11 +1689,11 @@ void SkGeIsrOnePort(int irq, void *dev_id, struct pt_regs *ptregs) struct SK_NET_DEVICE *dev = (struct SK_NET_DEVICE *)dev_id; DEV_NET *pNet; SK_AC *pAC; -SK_U32 IntSrc; /* interrupts source register contents */ +SK_U32 IntSrc; /* interrupts source register contents */ pNet = (DEV_NET*) dev->priv; pAC = pNet->pAC; - + /* * Check and process if its our interrupt */ @@ -1702,7 +1701,7 @@ SK_U32 IntSrc; /* interrupts source register contents */ if (IntSrc == 0) { return; } - + while (((IntSrc & IRQ_MASK) & ~SPECIAL_IRQS) != 0) { #if 0 /* software irq currently not used */ if (IntSrc & IRQ_SW) { @@ -1751,7 +1750,7 @@ SK_U32 IntSrc; /* interrupts source register contents */ #endif SK_IN32(pAC->IoBase, B0_ISRC, &IntSrc); } /* while (IntSrc & IRQ_MASK != 0) */ - + if ((IntSrc & SPECIAL_IRQS) || pAC->CheckQueue) { SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_INT_SRC, ("SPECIAL IRQ SP-Cards => %x\n", IntSrc)); @@ -1764,7 +1763,7 @@ SK_U32 IntSrc; /* interrupts source register contents */ spin_unlock(&pAC->SlowPathLock); } /* - * do it all again is case we cleared an interrupt that + * do it all again is case we cleared an interrupt that * came in after handling the ring (OUTs may be delayed * in hardware buffers, but are through after IN) */ @@ -1808,7 +1807,7 @@ struct SK_NET_DEVICE *dev) pNet = (DEV_NET*) dev->priv; pAC = pNet->pAC; - + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, ("SkGeOpen: pAC=0x%lX:\n", (unsigned long)pAC)); @@ -1934,7 +1933,7 @@ struct SK_NET_DEVICE *dev) SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, ("SkGeClose: pAC=0x%lX ", (unsigned long)pAC)); - /* + /* * Clear multicast table, promiscuous mode .... */ SkAddrMcClear(pAC, pAC->IoBase, PortIdx, 0); @@ -1962,11 +1961,11 @@ struct SK_NET_DEVICE *dev) SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_STOP, EvPara); SkEventDispatcher(pAC, pAC->IoBase); spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - + /* Stop port */ spin_lock_irqsave(&pAC->TxPort[pNet->PortNr] [TX_PRIO_LOW].TxDesRingLock, Flags); - SkGeStopPort(pAC, pAC->IoBase, pNet->PortNr, + SkGeStopPort(pAC, pAC->IoBase, pNet->PortNr, SK_STOP_ALL, SK_HARD_RST); spin_unlock_irqrestore(&pAC->TxPort[pNet->PortNr] [TX_PRIO_LOW].TxDesRingLock, Flags); @@ -1992,7 +1991,7 @@ struct SK_NET_DEVICE *dev) pAC->MaxPorts--; pNet->Up = 0; MOD_DEC_USE_COUNT; - + return (0); } /* SkGeClose */ @@ -2026,7 +2025,7 @@ int Rc; /* return code of XmitFrame */ pAC = pNet->pAC; #if 0 - if ((!skb_shinfo(skb)->nr_frags) || + if ((!skb_shinfo(skb)->nr_frags) || #else if (1 || #endif @@ -2136,8 +2135,8 @@ int BytesSend; pTxPort->pTxdRingHead = pTxd->pNextTxd; pTxPort->TxdRingFree--; /* the needed descriptor is reserved now */ - - /* + + /* * everything allocated ok, so add buffer to descriptor */ @@ -2166,15 +2165,15 @@ int BytesSend; #else TX_CTRL_EOF | pMessage->len; #endif - + if ((pTxPort->pTxdRingPrev->TBControl & TX_CTRL_OWN_BMU) == 0) { /* previous descriptor already done, so give tx start cmd */ /* StartTx(pAC, pTxPort->HwAddr); */ SK_OUT8(pTxPort->HwAddr, TX_Q_CTRL, TX_Q_CTRL_START); } pTxPort->pTxdRingPrev = pTxd; - - + + BytesSend = pMessage->len; spin_unlock_irqrestore(&pTxPort->TxDesRingLock, Flags); /* after releasing the lock, the skb may be immidiately freed */ @@ -2270,9 +2269,9 @@ struct sk_buff *pMessage) /* pointer to send-message */ pTxd->TcpSumOfs = 0; /* PH-Checksum already claculated */ pTxd->TcpSumSt = 14+hlength+16; pTxd->TcpSumWr = 14+hlength; - + } else { - pTxd->TBControl = TX_CTRL_CHECK_DEFAULT | + pTxd->TBControl = TX_CTRL_CHECK_DEFAULT | TX_CTRL_SOFTWARE | TX_CTRL_STF | skb_headlen(pMessage); @@ -2286,7 +2285,7 @@ struct sk_buff *pMessage) /* pointer to send-message */ /* Map SG fragments */ for (i = 0; i < skb_shinfo(pMessage)->nr_frags; i++) { sk_frag = &skb_shinfo(pMessage)->frags[i]; - + /* we already have the proper value in entry */ PhysAddr = (SK_U64) pci_map_page(pAC->PciDev, sk_frag->page, @@ -2297,11 +2296,11 @@ struct sk_buff *pMessage) /* pointer to send-message */ pTxd->VDataLow = (SK_U32) (PhysAddr & 0xffffffff); pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32); pTxd->pMBuf = pMessage; - + /* HW checksum */ if (pMessage->ip_summed == CHECKSUM_HW) { - pTxd->TBControl = TX_CTRL_OWN_BMU | - TX_CTRL_SOFTWARE | + pTxd->TBControl = TX_CTRL_OWN_BMU | + TX_CTRL_SOFTWARE | TX_CTRL_ST_FWD; /* We have to use the opcode for tcp here because the opcode for @@ -2328,7 +2327,7 @@ struct sk_buff *pMessage) /* pointer to send-message */ sk_frag->size; #endif pTxdFst->TBControl |= TX_CTRL_OWN_BMU | - TX_CTRL_SOFTWARE; + TX_CTRL_SOFTWARE; } else { pTxd->TBControl |= sk_frag->size; @@ -2360,15 +2359,15 @@ struct sk_buff *pMessage) /* pointer to send-message */ void dump_frag( SK_U8 *data, int length) { - int i; + int i; - printk("Length: %d\n", length); - for( i=0; i < length; i++ ) { - printk(" %02x", (SK_U8)*(data + i) ); - if( !((i+1) % 20) ) - printk("\n"); - } - printk("\n\n"); + printk("Length: %d\n", length); + for( i=0; i < length; i++ ) { + printk(" %02x", (SK_U8)*(data + i) ); + if( !((i+1) % 20) ) + printk("\n"); + } + printk("\n\n"); } @@ -2402,17 +2401,17 @@ SK_U64 PhysAddr; /* address of DMA mapping */ pNewTail = pTxPort->pTxdRingTail; pTxd = pNewTail; - /* + /* * loop forever; exits if TX_CTRL_SOFTWARE bit not set in start frame * or TX_CTRL_OWN_BMU bit set in any frame */ while (1) { Control = pTxd->TBControl; if ((Control & TX_CTRL_SOFTWARE) == 0) { - /* + /* * software controllable bit is set in first * fragment when given to BMU. Not set means that - * this fragment was never sent or is already + * this fragment was never sent or is already * freed ( -> ring completely free now). */ pTxPort->pTxdRingTail = pTxd; @@ -2426,7 +2425,7 @@ SK_U64 PhysAddr; /* address of DMA mapping */ } return; } - + /* release the DMA mapping */ PhysAddr = ((SK_U64) pTxd->VDataHigh) << (SK_U64) 32; PhysAddr |= (SK_U64) pTxd->VDataLow; @@ -2456,7 +2455,7 @@ SK_U64 PhysAddr; /* address of DMA mapping */ * Description of rx ring structure: * head - points to the descriptor which will be used next by the BMU * tail - points to the next descriptor to give to the BMU - * + * * Returns: N/A */ static void FillRxRing( @@ -2591,7 +2590,7 @@ struct sk_buff *pMsg; /* pointer to message holding frame */ struct sk_buff *pNewMsg; /* pointer to a new message for copying frame */ int FrameLength; /* total length of received frame */ SK_MBUF *pRlmtMbuf; /* ptr to a buffer for giving a frame to rlmt */ -SK_EVPARA EvPara; /* an event parameter union */ +SK_EVPARA EvPara; /* an event parameter union */ unsigned long Flags; /* for spin lock */ int PortIndex = pRxPort->PortIndex; unsigned int Offset; @@ -2610,7 +2609,7 @@ int Result; #endif SK_U64 PhysAddr; -rx_start: +rx_start: /* do forever; exit if RX_CTRL_OWN_BMU found */ for ( pRxd = pRxPort->pRxdRingHead ; pRxPort->RxdRingFree < pAC->RxDescrPerRing ; @@ -2619,8 +2618,8 @@ rx_start: pRxPort->RxdRingFree ++) { /* - * For a better understanding of this loop - * Go through every descriptor beginning at the head + * For a better understanding of this loop + * Go through every descriptor beginning at the head * Please note: the ring might be completely received so the OWN bit * set is not a good crirteria to leave that loop. * Therefore the RingFree counter is used. @@ -2629,7 +2628,7 @@ rx_start: */ Control = pRxd->RBControl; - + /* check if this descriptor is ready */ if ((Control & RX_CTRL_OWN_BMU) != 0) { /* this descriptor is not yet ready */ @@ -2684,7 +2683,7 @@ rx_start: if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { IsBc = (FrameStat & XMR_FS_BC) != 0; IsMc = (FrameStat & XMR_FS_MC) != 0; - IsBadFrame = (FrameStat & + IsBadFrame = (FrameStat & (XMR_FS_ANY_ERR | XMR_FS_2L_VLAN)) != 0; } else { IsBc = (FrameStat & GMR_FS_BC) != 0; @@ -2777,7 +2776,7 @@ rx_start: (pAC->GIni.GIChipId == CHIP_ID_GENESIS)) || (pAC->GIni.GIChipId == CHIP_ID_YUKON)) { Result = SkCsGetReceiveInfo(pAC, - &pMsg->data[14], + &pMsg->data[14], Csum1, Csum2, pRxPort->PortIndex); if (Result == SKCS_STATUS_IP_FRAGMENT || @@ -2799,7 +2798,7 @@ rx_start: #endif } /* IP frame */ } /* frame > SK_COPY_TRESHOLD */ - + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("V")); ForRlmt = SK_RLMT_RX_PROTOCOL; #if 0 @@ -2811,7 +2810,7 @@ rx_start: #if 0 IsMc = (FrameStat & XMR_FS_MC)==XMR_FS_MC; #endif - SK_RLMT_LOOKAHEAD(pAC, PortIndex, + SK_RLMT_LOOKAHEAD(pAC, PortIndex, &pMsg->data[Offset], IsBc, IsMc, &ForRlmt); } @@ -2841,16 +2840,16 @@ rx_start: } else { /* drop frame */ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_RX_PROGRESS, ("D")); DEV_KFREE_SKB(pMsg); } - + } /* if not for rlmt */ else { /* packet for rlmt */ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_RX_PROGRESS, ("R")); pRlmtMbuf = SkDrvAllocRlmtMbuf(pAC, pAC->IoBase, FrameLength); @@ -2878,15 +2877,15 @@ rx_start: pAC->CheckQueue = SK_TRUE; } - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_RX_PROGRESS, ("Q")); } #if 0 - if ((pAC->dev[pRxPort->PortIndex]->flags & + if ((pAC->dev[pRxPort->PortIndex]->flags & (IFF_PROMISC | IFF_ALLMULTI)) != 0 || - (ForRlmt & SK_RLMT_RX_PROTOCOL) == - SK_RLMT_RX_PROTOCOL) { + (ForRlmt & SK_RLMT_RX_PROTOCOL) == + SK_RLMT_RX_PROTOCOL) { pMsg->dev = pAC->dev[pRxPort->PortIndex]; pMsg->protocol = eth_type_trans(pMsg, pAC->dev[pRxPort->PortIndex]); @@ -3078,7 +3077,7 @@ int i; /* loop counter */ if (pAC->RlmtNets == 1) { StandbyRam = SK_RLMT_STANDBY_QRXSIZE + SK_RLMT_STANDBY_QXASIZE + SK_RLMT_STANDBY_QXSSIZE; - RemainingRam = pAC->GIni.GIRamSize - + RemainingRam = pAC->GIni.GIRamSize - (pAC->GIni.GIMacsFound-1) * StandbyRam; for (i=0; i<pAC->GIni.GIMacsFound; i++) { pAC->GIni.GP[i].PRxQSize = SK_RLMT_STANDBY_QRXSIZE; @@ -3104,7 +3103,7 @@ if (pAC->RlmtNets == 1) { pAC->GIni.GP[i].PXSQSize = 0; pAC->GIni.GP[i].PXAQSize = (RemainingRam - RxRam) & ~7; } - + pAC->RxQueueSize = RxRam; pAC->TxSQueueSize = 0; pAC->TxAQueueSize = (RemainingRam - RxRam) & ~7; @@ -3163,14 +3162,14 @@ SK_AC *pAC = pNet->pAC; struct sockaddr *addr = p; unsigned long Flags; - + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, ("SkGeSetMacAddr starts now...\n")); if(netif_running(dev)) return -EBUSY; memcpy(dev->dev_addr, addr->sa_data,dev->addr_len); - + spin_lock_irqsave(&pAC->SlowPathLock, Flags); if (pAC->RlmtNets == 2) @@ -3180,8 +3179,7 @@ unsigned long Flags; SkAddrOverride(pAC, pAC->IoBase, pAC->ActivePort, (SK_MAC_ADDR*)dev->dev_addr, SK_ADDR_VIRTUAL_ADDRESS); - - + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); return 0; } /* SkGeSetMacAddr */ @@ -3242,7 +3240,7 @@ unsigned long Flags; SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, ("Number of MC entries: %d ", dev->mc_count)); - + pMcList = dev->mc_list; for (i=0; i<dev->mc_count; i++, pMcList = pMcList->next) { SkAddrMcAdd(pAC, pAC->IoBase, PortIdx, @@ -3259,7 +3257,7 @@ unsigned long Flags; SkAddrMcUpdate(pAC, pAC->IoBase, PortIdx); } spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - + return; } /* SkGeSetRxMode */ @@ -3322,7 +3320,7 @@ SK_EVPARA EvPara; spin_lock_irqsave(&pAC->SlowPathLock, Flags); /* Found more than one port */ - if ((pAC->GIni.GIMacsFound == 2 ) && + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { /* Stop both ports */ EvPara.Para32[0] = 0; @@ -3342,16 +3340,16 @@ SK_EVPARA EvPara; } - /* + /* * adjust number of rx buffers allocated */ if (NewMtu > 1500) { /* use less rx buffers */ for (i=0; i<pAC->GIni.GIMacsFound; i++) { /* Found more than one port */ - if ((pAC->GIni.GIMacsFound == 2 ) && + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { - pAC->RxPort[i].RxFillLimit = + pAC->RxPort[i].RxFillLimit = pAC->RxDescrPerRing - 100; } else { if (i == pAC->ActivePort) @@ -3367,7 +3365,7 @@ SK_EVPARA EvPara; /* use normal amount of rx buffers */ for (i=0; i<pAC->GIni.GIMacsFound; i++) { /* Found more than one port */ - if ((pAC->GIni.GIMacsFound == 2 ) && + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { pAC->RxPort[i].RxFillLimit = 1; } else { @@ -3379,18 +3377,18 @@ SK_EVPARA EvPara; } } } - - SkGeDeInit(pAC, pAC->IoBase); - /* + SkGeDeInit(pAC, pAC->IoBase); + + /* * enable/disable hardware support for long frames */ if (NewMtu > 1500) { -// pAC->JumboActivated = SK_TRUE; /* is never set back !!! */ +/* pAC->JumboActivated = SK_TRUE; /#* is never set back !!! */ pAC->GIni.GIPortUsage = SK_JUMBO_LINK; } else { - if ((pAC->GIni.GIMacsFound == 2 ) && + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { pAC->GIni.GIPortUsage = SK_MUL_LINK; } else { @@ -3405,13 +3403,13 @@ SK_EVPARA EvPara; SkAddrInit( pAC, pAC->IoBase, 1); SkRlmtInit( pAC, pAC->IoBase, 1); SkTimerInit(pAC, pAC->IoBase, 1); - + /* * tschilling: * Speed and others are set back to default in level 1 init! */ GetConfiguration(pAC); - + SkGeInit( pAC, pAC->IoBase, 2); SkI2cInit( pAC, pAC->IoBase, 2); SkEventInit(pAC, pAC->IoBase, 2); @@ -3420,7 +3418,7 @@ SK_EVPARA EvPara; SkRlmtInit( pAC, pAC->IoBase, 2); SkTimerInit(pAC, pAC->IoBase, 2); - /* + /* * clear and reinit the rx rings here */ for (i=0; i<pAC->GIni.GIMacsFound; i++) { @@ -3458,22 +3456,22 @@ SK_EVPARA EvPara; SkEventDispatcher(pAC, pAC->IoBase); /* Found more than one port */ - if ((pAC->GIni.GIMacsFound == 2 ) && + if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) { /* Start both ports */ EvPara.Para32[0] = pAC->RlmtNets; EvPara.Para32[1] = -1; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_SET_NETS, EvPara); - - + + EvPara.Para32[1] = -1; EvPara.Para32[0] = pNet->PortNr; SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); - + if (pOtherNet->Up) { EvPara.Para32[0] = pOtherNet->PortNr; - SkEventQueue(pAC, SKGE_RLMT, + SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara); } } else { @@ -3482,7 +3480,7 @@ SK_EVPARA EvPara; SkEventDispatcher(pAC, pAC->IoBase); spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - + return 0; } /* SkGeChangeMtu */ @@ -3511,24 +3509,24 @@ unsigned long Flags; /* for spin lock */ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY, ("SkGeStats starts now...\n")); pPnmiStruct = &pAC->PnmiStruct; - memset(pPnmiStruct, 0, sizeof(SK_PNMI_STRUCT_DATA)); - spin_lock_irqsave(&pAC->SlowPathLock, Flags); - Size = SK_PNMI_STRUCT_SIZE; + memset(pPnmiStruct, 0, sizeof(SK_PNMI_STRUCT_DATA)); + spin_lock_irqsave(&pAC->SlowPathLock, Flags); + Size = SK_PNMI_STRUCT_SIZE; SkPnmiGetStruct(pAC, pAC->IoBase, pPnmiStruct, &Size, pNet->NetNr); - spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - pPnmiStat = &pPnmiStruct->Stat[0]; - pPnmiConf = &pPnmiStruct->Conf[0]; + spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); + pPnmiStat = &pPnmiStruct->Stat[0]; + pPnmiConf = &pPnmiStruct->Conf[0]; pAC->stats.rx_packets = (SK_U32) pPnmiStruct->RxDeliveredCts & 0xFFFFFFFF; pAC->stats.tx_packets = (SK_U32) pPnmiStat->StatTxOkCts & 0xFFFFFFFF; pAC->stats.rx_bytes = (SK_U32) pPnmiStruct->RxOctetsDeliveredCts; pAC->stats.tx_bytes = (SK_U32) pPnmiStat->StatTxOctetsOkCts; - - if (pNet->Mtu <= 1500) { - pAC->stats.rx_errors = (SK_U32) pPnmiStruct->InErrorsCts & 0xFFFFFFFF; - } else { - pAC->stats.rx_errors = (SK_U32) ((pPnmiStruct->InErrorsCts - - pPnmiStat->StatRxTooLongCts) & 0xFFFFFFFF); + + if (pNet->Mtu <= 1500) { + pAC->stats.rx_errors = (SK_U32) pPnmiStruct->InErrorsCts & 0xFFFFFFFF; + } else { + pAC->stats.rx_errors = (SK_U32) ((pPnmiStruct->InErrorsCts - + pPnmiStat->StatRxTooLongCts) & 0xFFFFFFFF); } @@ -3587,7 +3585,7 @@ int Size; pNet = (DEV_NET*) dev->priv; pAC = pNet->pAC; - + if(copy_from_user(&Ioctl, rq->ifr_data, sizeof(SK_GE_IOCTL))) { return -EFAULT; } @@ -3596,8 +3594,8 @@ int Size; case SK_IOCTL_SETMIB: case SK_IOCTL_PRESETMIB: if (!capable(CAP_NET_ADMIN)) return -EPERM; - case SK_IOCTL_GETMIB: - if(copy_from_user(&pAC->PnmiStruct, Ioctl.pData, + case SK_IOCTL_GETMIB: + if(copy_from_user(&pAC->PnmiStruct, Ioctl.pData, Ioctl.Len<sizeof(pAC->PnmiStruct)? Ioctl.Len : sizeof(pAC->PnmiStruct))) { return -EFAULT; @@ -3706,8 +3704,8 @@ SK_BOOL DupSet; * ----------------------------------------------------------------- * Sense | AutoSense | AutoSense | AutoSense | */ -int Capabilities[3][3] = - { { -1, SK_LMODE_FULL, SK_LMODE_HALF}, +int Capabilities[3][3] = + { { -1, SK_LMODE_FULL, SK_LMODE_HALF}, {SK_LMODE_AUTOBOTH, SK_LMODE_AUTOFULL, SK_LMODE_AUTOHALF}, {SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE, SK_LMODE_AUTOSENSE} }; #define DC_BOTH 0 @@ -3745,7 +3743,7 @@ int Capabilities[3][3] = /* Only copper type adapter and GE V2 cards */ if (((pAC->GIni.GIChipId != CHIP_ID_YUKON) || (pAC->GIni.GICopperType != SK_TRUE)) && - ((LinkSpeed != SK_LSPEED_AUTO) && + ((LinkSpeed != SK_LSPEED_AUTO) && (LinkSpeed != SK_LSPEED_1000MBPS))) { printk("%s: Illegal value for Speed_A. " "Not a copper card or GE V2 card\n Using " @@ -3796,7 +3794,7 @@ int Capabilities[3][3] = else printk("%s: Illegal value for DupCap_A\n", pAC->dev[0]->name); } - + /* check for illegal combinations */ if (AutoSet && AutoNeg==AN_SENS && DupSet) { printk("%s, Port A: DuplexCapabilities" @@ -3812,7 +3810,7 @@ int Capabilities[3][3] = if (AutoSet && AutoNeg==AN_OFF && !DupSet) { DuplexCap = DC_FULL; } - + if (!AutoSet && DupSet) { printk("%s, Port A: Duplex setting not" " possible in\n default AutoNegotiation mode" @@ -3820,11 +3818,11 @@ int Capabilities[3][3] = pAC->dev[0]->name); AutoNeg = AN_ON; } - + /* set the desired mode */ pAC->GIni.GP[0].PLinkModeConf = Capabilities[AutoNeg][DuplexCap]; - + pAC->GIni.GP[0].PFlowCtrlMode = SK_FLOW_MODE_SYM_OR_REM; if (FlowCtrl_A != NULL && pAC->Index<SK_MAX_CARD_PARAM && FlowCtrl_A[pAC->Index] != NULL) { @@ -3874,8 +3872,8 @@ int Capabilities[3][3] = pAC->dev[0]->name); } pAC->GIni.GP[0].PMSMode = MSMode; - - + + /* settings for port B */ /* settings link speed */ LinkSpeed = SK_LSPEED_AUTO; /* default: do auto select */ @@ -3904,7 +3902,7 @@ int Capabilities[3][3] = /* Only copper type adapter and GE V2 cards */ if (((pAC->GIni.GIChipId != CHIP_ID_YUKON) || (pAC->GIni.GICopperType != SK_TRUE)) && - ((LinkSpeed != SK_LSPEED_AUTO) && + ((LinkSpeed != SK_LSPEED_AUTO) && (LinkSpeed != SK_LSPEED_1000MBPS))) { printk("%s: Illegal value for Speed_B. " "Not a copper card or GE V2 card\n Using " @@ -3953,7 +3951,7 @@ int Capabilities[3][3] = } else printk("Illegal value for DupCap_B\n"); } - + /* check for illegal combinations */ if (AutoSet && AutoNeg==AN_SENS && DupSet) { printk("%s, Port B: DuplexCapabilities" @@ -3969,7 +3967,7 @@ int Capabilities[3][3] = if (AutoSet && AutoNeg==AN_OFF && !DupSet) { DuplexCap = DC_FULL; } - + if (!AutoSet && DupSet) { printk("%s, Port B: Duplex setting not" " possible in\n default AutoNegotiation mode" @@ -4031,8 +4029,8 @@ int Capabilities[3][3] = pAC->dev[1]->name); } pAC->GIni.GP[1].PMSMode = MSMode; - - + + /* settings for both ports */ pAC->ActivePort = 0; if (PrefPort != NULL && pAC->Index<SK_MAX_CARD_PARAM && @@ -4080,7 +4078,7 @@ int Capabilities[3][3] = } else if (strcmp(RlmtMode[pAC->Index], "CheckSeg") == 0) { pAC->RlmtMode = SK_RLMT_CHECK_LINK | - SK_RLMT_CHECK_LOC_LINK | + SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_SEG; } else if ((strcmp(RlmtMode[pAC->Index], "DualNet") == 0) && @@ -4132,8 +4130,6 @@ unsigned long Flags; } /* ProductStr */ - - /****************************************************************************/ /* functions for common modules *********************************************/ /****************************************************************************/ @@ -4191,8 +4187,8 @@ struct sk_buff *pMsgBlock; /* pointer to a new message block */ * Nothing */ void SkDrvFreeRlmtMbuf( -SK_AC *pAC, /* pointer to adapter context */ -SK_IOC IoC, /* the IO-context */ +SK_AC *pAC, /* pointer to adapter context */ +SK_IOC IoC, /* the IO-context */ SK_MBUF *pMbuf) /* size of the requested buffer */ { SK_MBUF *pFreeMbuf; @@ -4376,7 +4372,7 @@ SK_U8 Val) /* pointer to store the read value */ * Returns: * 0 if everything ok * < 0 on error - * + * */ int SkDrvEvent( SK_AC *pAC, /* pointer to adapter context */ @@ -4432,15 +4428,15 @@ SK_BOOL DualNet; spin_unlock_irqrestore( &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, Flags); - + /* clear rx ring from received frames */ ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE); - + ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]); spin_lock_irqsave( &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, Flags); - + /* tschilling: Handling of return value inserted. */ if (SkGeInitPort(pAC, IoC, FromPort)) { if (FromPort == 0) { @@ -4506,7 +4502,7 @@ SK_BOOL DualNet; else { printk(" flowctrl: none\n"); } - + /* tschilling: Check against CopperType now. */ if ((pAC->GIni.GICopperType == SK_TRUE) && (pAC->GIni.GP[FromPort].PLinkSpeedUsed == @@ -4533,8 +4529,8 @@ SK_BOOL DualNet; printk(" scatter-gather: disabled\n"); #endif #endif /* SK98_INFO */ - - if ((Param.Para32[0] != pAC->ActivePort) && + + if ((Param.Para32[0] != pAC->ActivePort) && (pAC->RlmtNets == 1)) { NewPara.Para32[0] = pAC->ActivePort; NewPara.Para32[1] = Param.Para32[0]; @@ -4591,11 +4587,11 @@ SK_BOOL DualNet; ReceiveIrq(pAC, &pAC->RxPort[FromPort], SK_FALSE); /* clears rx ring */ ReceiveIrq(pAC, &pAC->RxPort[ToPort], SK_FALSE); /* clears rx ring */ - + ClearTxRing(pAC, &pAC->TxPort[FromPort][TX_PRIO_LOW]); ClearTxRing(pAC, &pAC->TxPort[ToPort][TX_PRIO_LOW]); spin_lock_irqsave( - &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, + &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, Flags); spin_lock_irqsave( &pAC->TxPort[ToPort][TX_PRIO_LOW].TxDesRingLock, Flags); @@ -4608,7 +4604,7 @@ SK_BOOL DualNet; if (pAC->RlmtNets == 2) { DualNet = SK_TRUE; } - + if (SkGeInitAssignRamToQueues( pAC, pAC->ActivePort, @@ -4662,7 +4658,7 @@ SK_BOOL DualNet; } SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, ("END EVENT ")); - + return (0); } /* SkDrvEvent */ @@ -4677,7 +4673,7 @@ SK_BOOL DualNet; * Returns: * 0 if everything ok * < 0 on error - * + * */ void SkErrorLog( SK_AC *pAC, @@ -4730,7 +4726,7 @@ char ClassStr[80]; * This function prints frames to the system logfile/to the console. * * Returns: N/A - * + * */ static void DumpMsg(struct sk_buff *skb, char *str) { @@ -4758,17 +4754,16 @@ static void DumpMsg(struct sk_buff *skb, char *str) } /* DumpMsg */ - /***************************************************************************** * * DumpData - print a data area * * Description: - * This function prints a area of data to the system logfile/to the + * This function prints a area of data to the system logfile/to the * console. * * Returns: N/A - * + * */ static void DumpData(char *p, int size) { @@ -4812,11 +4807,11 @@ char HEXCHAR[] = "0123456789ABCDEF"; * DumpLong - print a data area as long values * * Description: - * This function prints a area of data to the system logfile/to the + * This function prints a area of data to the system logfile/to the * console. * * Returns: N/A - * + * */ static void DumpLong(char *pc, int size) { @@ -4867,10 +4862,3 @@ int l; #endif #endif /* CONFIG_SK98 */ - -/* - * Local variables: - * compile-command: "make" - * End: - */ - diff --git a/drivers/sk98lin/skgehwt.c b/drivers/sk98lin/skgehwt.c index 10c366d01e..f8681a8b0f 100644 --- a/drivers/sk98lin/skgehwt.c +++ b/drivers/sk98lin/skgehwt.c @@ -29,46 +29,46 @@ * $Log: skgehwt.c,v $ * Revision 1.13 1999/11/22 13:31:12 cgoos * Changed license header to GPL. - * + * * Revision 1.12 1998/10/15 15:11:34 gklug * fix: ID_sccs to SysKonnectFileId - * + * * Revision 1.11 1998/10/08 15:27:51 gklug * chg: correction factor is host clock dependent - * + * * Revision 1.10 1998/09/15 14:18:31 cgoos * Changed more BOOLEANs to SK_xxx * * Revision 1.9 1998/09/15 14:16:06 cgoos * Changed line 107: FALSE to SK_FALSE - * + * * Revision 1.8 1998/08/24 13:04:44 gklug * fix: typo - * + * * Revision 1.7 1998/08/19 09:50:49 gklug * fix: remove struct keyword from c-code (see CCC) add typedefs - * + * * Revision 1.6 1998/08/17 09:59:02 gklug * fix: typos - * + * * Revision 1.5 1998/08/14 07:09:10 gklug * fix: chg pAc -> pAC - * + * * Revision 1.4 1998/08/10 14:14:52 gklug * rmv: unneccessary SK_ADDR macro - * + * * Revision 1.3 1998/08/07 12:53:44 gklug * fix: first compiled version - * + * * Revision 1.2 1998/08/07 09:19:29 gklug * adapt functions to the C coding conventions * rmv unneccessary functions. - * + * * Revision 1.1 1998/08/05 11:28:36 gklug * first version: adapted from SMT/FDDI - * - * - * + * + * + * * ******************************************************************************/ diff --git a/drivers/sk98lin/skgeinit.c b/drivers/sk98lin/skgeinit.c index cb6e20f022..a18dc0a488 100644 --- a/drivers/sk98lin/skgeinit.c +++ b/drivers/sk98lin/skgeinit.c @@ -30,100 +30,100 @@ * Corrected setting of GIHstClkFact (Host Clock Factor) and * GIPollTimerVal (Descr. Poll Timer Init Value) for YUKON. * Editorial changes. - * + * * Revision 1.84 2003/01/28 09:57:25 rschmidt * Added detection of YUKON-Lite Rev. A0 (stored in GIYukonLite). * Disabled Rx GMAC FIFO Flush for YUKON-Lite Rev. A0. * Added support for CLK_RUN (YUKON-Lite). * Added additional check of PME from D3cold for setting GIVauxAvail. * Editorial changes. - * + * * Revision 1.83 2002/12/17 16:15:41 rschmidt * Added default setting of PhyType (Copper) for YUKON. * Added define around check for HW self test results. * Editorial changes. - * + * * Revision 1.82 2002/12/05 13:40:21 rschmidt * Added setting of Rx GMAC FIFO Flush Mask register. * Corrected PhyType with new define SK_PHY_MARV_FIBER when * YUKON Fiber board was found. * Editorial changes. - * + * * Revision 1.81 2002/11/15 12:48:35 rschmidt * Replaced message SKERR_HWI_E018 with SKERR_HWI_E024 for Rx queue error * in SkGeStopPort(). * Added init for pAC->GIni.GIGenesis with SK_FALSE in YUKON-branch. * Editorial changes. - * + * * Revision 1.80 2002/11/12 17:28:30 rschmidt * Initialized GIPciSlot64 and GIPciClock66 in SkGeInit1(). * Reduced PCI FIFO watermarks for 32bit/33MHz bus in SkGeInitBmu(). * Editorial changes. - * + * * Revision 1.79 2002/10/21 09:31:02 mkarl * Changed SkGeInitAssignRamToQueues(), removed call to * SkGeInitAssignRamToQueues in SkGeInit1 and fixed compiler warning in * SkGeInit1. - * + * * Revision 1.78 2002/10/16 15:55:07 mkarl * Fixed a bug in SkGeInitAssignRamToQueues. - * + * * Revision 1.77 2002/10/14 15:07:22 rschmidt * Corrected timeout handling for Rx queue in SkGeStopPort() (#10748) * Editorial changes. - * + * * Revision 1.76 2002/10/11 09:24:38 mkarl * Added check for HW self test results. - * + * * Revision 1.75 2002/10/09 16:56:44 mkarl * Now call SkGeInitAssignRamToQueues() in Init Level 1 in order to assign * the adapter memory to the queues. This default assignment is not suitable * for dual net mode. - * + * * Revision 1.74 2002/09/12 08:45:06 rwahl * Set defaults for PMSCap, PLinkSpeed & PLinkSpeedCap dependent on PHY. - * + * * Revision 1.73 2002/08/16 15:19:45 rschmidt * Corrected check for Tx queues in SkGeCheckQSize(). * Added init for new entry GIGenesis and GICopperType * Replaced all if(GIChipId == CHIP_ID_GENESIS) with new entry GIGenesis. * Replaced wrong 1st para pAC with IoC in SK_IN/OUT macros. - * + * * Revision 1.72 2002/08/12 13:38:55 rschmidt * Added check if VAUX is available (stored in GIVauxAvail) * Initialized PLinkSpeedCap in Port struct with SK_LSPEED_CAP_1000MBPS * Editorial changes. - * + * * Revision 1.71 2002/08/08 16:32:58 rschmidt * Added check for Tx queues in SkGeCheckQSize(). * Added start of Time Stamp Timer (YUKON) in SkGeInit2(). * Editorial changes. - * + * * Revision 1.70 2002/07/23 16:04:26 rschmidt * Added init for GIWolOffs (HW-Bug in YUKON 1st rev.) * Minor changes - * + * * Revision 1.69 2002/07/17 17:07:08 rwahl * - SkGeInit1(): fixed PHY type debug output; corrected init of GIFunc * table & GIMacType. * - Editorial changes. - * + * * Revision 1.68 2002/07/15 18:38:31 rwahl * Added initialization for MAC type dependent function table. - * + * * Revision 1.67 2002/07/15 15:45:39 rschmidt * Added Tx Store & Forward for YUKON (GMAC Tx FIFO is only 1 kB) * Replaced SK_PHY_MARV by SK_PHY_MARV_COPPER * Editorial changes - * + * * Revision 1.66 2002/06/10 09:35:08 rschmidt * Replaced C++ comments (//) * Editorial changes - * + * * Revision 1.65 2002/06/05 08:33:37 rschmidt * Changed GIRamSize and Reset sequence for YUKON. * SkMacInit() replaced by SkXmInitMac() resp. SkGmInitMac() - * + * * Revision 1.64 2002/04/25 13:03:20 rschmidt * Changes for handling YUKON. * Removed reference to xmac_ii.h (not necessary). @@ -144,71 +144,71 @@ * Use of SkGeXmitLED() only for GENESIS. * Changes for V-CPU support. * Editorial changes. - * + * * Revision 1.63 2001/04/05 11:02:09 rassmann * Stop Port check of the STOP bit did not take 2/18 sec as wanted. - * + * * Revision 1.62 2001/02/07 07:54:21 rassmann * Corrected copyright. - * + * * Revision 1.61 2001/01/31 15:31:40 gklug * fix: problem with autosensing an SR8800 switch - * + * * Revision 1.60 2000/10/18 12:22:21 cgoos * Added workaround for half duplex hangup. - * + * * Revision 1.59 2000/10/10 11:22:06 gklug * add: in manual half duplex mode ignore carrier extension errors - * + * * Revision 1.58 2000/10/02 14:10:27 rassmann * Reading BCOM PHY after releasing reset until it returns a valid value. - * + * * Revision 1.57 2000/08/03 14:55:28 rassmann * Waiting for I2C to be ready before de-initializing adapter * (prevents sensors from hanging up). - * + * * Revision 1.56 2000/07/27 12:16:48 gklug * fix: Stop Port check of the STOP bit does now take 2/18 sec as wanted - * + * * Revision 1.55 1999/11/22 13:32:26 cgoos * Changed license header to GPL. - * + * * Revision 1.54 1999/10/26 07:32:54 malthoff * Initialize PHWLinkUp with SK_FALSE. Required for Diagnostics. - * + * * Revision 1.53 1999/08/12 19:13:50 malthoff * Fix for 1000BT. Do not owerwrite XM_MMU_CMD when * disabling receiver and transmitter. Other bits * may be lost. - * + * * Revision 1.52 1999/07/01 09:29:54 gklug * fix: DoInitRamQueue needs pAC - * + * * Revision 1.51 1999/07/01 08:42:21 gklug * chg: use Store & forward for RAM buffer when Jumbos are used - * + * * Revision 1.50 1999/05/27 13:19:38 cgoos * Added Tx PCI watermark initialization. * Removed Tx RAM queue Store & Forward setting. - * + * * Revision 1.49 1999/05/20 14:32:45 malthoff * SkGeLinkLED() is completly removed now. - * + * * Revision 1.48 1999/05/19 07:28:24 cgoos * SkGeLinkLED no more available for drivers. * Changes for 1000Base-T. - * + * * Revision 1.47 1999/04/08 13:57:45 gklug * add: Init of new port struct fiels PLinkResCt * chg: StopPort Timer check - * + * * Revision 1.46 1999/03/25 07:42:15 malthoff * SkGeStopPort(): Add workaround for cache incoherency. * Create error log entry, disable port, and * exit loop if it does not terminate. * Add XM_RX_LENERR_OK to the default value for the * XMAC receive command register. - * + * * Revision 1.45 1999/03/12 16:24:47 malthoff * Remove PPollRxD and PPollTxD. * Add check for GIPollTimerVal. @@ -474,7 +474,7 @@ SK_BOOL PollTxD) /* SK_TRUE (enable pol.), SK_FALSE (disable pol.) */ if (pPrt->PXSQSize != 0) { SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), DWord); } - + if (pPrt->PXAQSize != 0) { SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), DWord); } @@ -556,7 +556,7 @@ int Mode) /* Mode may be SK_LED_DIS, SK_LED_ENA, SK_LED_TST */ SK_OUT8(IoC, Led + XMIT_LED_TST, LED_T_OFF); break; } - + /* * 1000BT: The Transmit LED is driven by the PHY. * But the default LED configuration is used for @@ -672,7 +672,7 @@ SK_BOOL DualNet) /* adapter context */ for (i = 0; i < pAC->GIni.GIMacsFound; i++) { pGePort = &pAC->GIni.GP[i]; - + /* take away the minimum memory for active queues */ ActivePortKilobytes -= (SK_MIN_RXQ_SIZE + SK_MIN_TXQ_SIZE); @@ -691,7 +691,7 @@ SK_BOOL DualNet) /* adapter context */ SK_MIN_TXQ_SIZE); } } - else { + else { /* Rlmt Mode or single link adapter */ /* Set standby queue size defaults for all standby ports */ @@ -790,22 +790,22 @@ int Port) /* port index */ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E011, SKERR_HWI_E011MSG); return(1); } - + /* * the size of at least one Tx queue (synch. or asynch.) has to be > 0. * if Jumbo Frames are used, this size has to be >= 16 kB. */ if ((i == Port && pPrt->PXSQSize == 0 && pPrt->PXAQSize == 0) || (pAC->GIni.GIPortUsage == SK_JUMBO_LINK && - ((pPrt->PXSQSize > 0 && pPrt->PXSQSize < SK_MIN_TXQ_SIZE) || + ((pPrt->PXSQSize > 0 && pPrt->PXSQSize < SK_MIN_TXQ_SIZE) || (pPrt->PXAQSize > 0 && pPrt->PXAQSize < SK_MIN_TXQ_SIZE)))) { SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E023, SKERR_HWI_E023MSG); return(1); } - + UsedMem += pPrt->PRxQSize + pPrt->PXSQSize + pPrt->PXAQSize; } - + if (UsedMem > pAC->GIni.GIRamSize) { SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E012, SKERR_HWI_E012MSG); return(1); @@ -948,20 +948,20 @@ int Port) /* Port Index (MAC_1 + n) */ * - setup defaults for the control register * - enable the FIFO */ - + Word = GMF_RX_CTRL_DEF; - + if (pAC->GIni.GIGenesis) { /* Configure Rx MAC FIFO */ SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_CLR); SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_RX_CTRL_DEF); SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_ENA_OP_MD); - + /* Configure Tx MAC FIFO */ SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_RST_CLR); SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF); SK_OUT8(IoC, MR_ADDR(Port, TX_MFF_CTRL2), MFF_ENA_OP_MD); - + /* Enable frame flushing if jumbo frames used */ if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) { SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_ENA_FLUSH); @@ -970,28 +970,28 @@ int Port) /* Port Index (MAC_1 + n) */ else { /* set Rx GMAC FIFO Flush Mask */ SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_MSK), (SK_U16)RX_FF_FL_DEF_MSK); - + if (pAC->GIni.GIYukonLite && pAC->GIni.GIChipId == CHIP_ID_YUKON) { Word &= ~GMF_RX_F_FL_ON; } - + /* Configure Rx MAC FIFO */ SK_OUT8(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR); SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_CTRL_T), Word); - + /* set Rx GMAC FIFO Flush Threshold (default: 0x0a -> 56 bytes) */ SK_OUT16(IoC, MR_ADDR(Port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); - + /* Configure Tx MAC FIFO */ SK_OUT8(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U8)GMF_RST_CLR); SK_OUT16(IoC, MR_ADDR(Port, TX_GMF_CTRL_T), (SK_U16)GMF_TX_CTRL_DEF); - + #ifdef VCPU SK_IN32(IoC, MR_ADDR(Port, RX_GMF_AF_THR), &DWord); SK_IN32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), &DWord); #endif /* VCPU */ - + /* set Tx GMAC FIFO Almost Empty Threshold */ /* SK_OUT32(IoC, MR_ADDR(Port, TX_GMF_AE_THR), 0); */ } @@ -1120,16 +1120,16 @@ int SyncMode) /* Sync Mode: TXA_ENA_ALLOC | TXA_DIS_ALLOC | 0 */ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG); return(1); } - + if (pAC->GIni.GP[Port].PXSQSize == 0) { SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E009, SKERR_HWI_E009MSG); return(2); } - + /* calculate register values */ IntTime = (IntTime / 2) * pAC->GIni.GIHstClkFact / 100; LimCount = LimCount / 8; - + if (IntTime > TXA_MAX_VAL || LimCount > TXA_MAX_VAL) { SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E010, SKERR_HWI_E010MSG); return(1); @@ -1147,13 +1147,13 @@ int SyncMode) /* Sync Mode: TXA_ENA_ALLOC | TXA_DIS_ALLOC | 0 */ */ SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_ENA_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); - + SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), IntTime); SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), LimCount); - + SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), (SK_U8)(SyncMode & (TXA_ENA_ALLOC | TXA_DIS_ALLOC))); - + if (IntTime != 0 || LimCount != 0) { SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_DIS_FSYNC | TXA_START_RC); } @@ -1271,10 +1271,10 @@ int Port) /* Port Index (MAC_1 + n) */ DoInitRamQueue(pAC, IoC, pPrt->PRxQOff, pPrt->PRxQRamStart, pPrt->PRxQRamEnd, RxQType); - + DoInitRamQueue(pAC, IoC, pPrt->PXsQOff, pPrt->PXsQRamStart, pPrt->PXsQRamEnd, SK_TX_RAM_Q); - + DoInitRamQueue(pAC, IoC, pPrt->PXaQOff, pPrt->PXaQRamStart, pPrt->PXaQRamEnd, SK_TX_RAM_Q); @@ -1341,7 +1341,7 @@ int Port) /* Port Index (MAC_1 + n) */ RxWm = SK_BMU_RX_WM; TxWm = SK_BMU_TX_WM; - + if (!pAC->GIni.GIPciSlot64 && !pAC->GIni.GIPciClock66) { /* for better performance */ RxWm /= 2; @@ -1360,7 +1360,7 @@ int Port) /* Port Index (MAC_1 + n) */ SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_CSR), CSR_CLR_RESET); SK_OUT32(IoC, Q_ADDR(pPrt->PXsQOff, Q_F), TxWm); } - + if (pPrt->PXAQSize != 0) { SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_CSR), CSR_CLR_RESET); SK_OUT32(IoC, Q_ADDR(pPrt->PXaQOff, Q_F), TxWm); @@ -1393,14 +1393,14 @@ int QuIoOffs) /* Queue IO Address Offset */ SK_U32 QuCsr; /* CSR contents */ SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr); - + if ((QuCsr & (CSR_STOP | CSR_SV_IDLE)) == 0) { /* Stop Descriptor overridden by start command */ SK_OUT32(IoC, Q_ADDR(QuIoOffs, Q_CSR), CSR_STOP); SK_IN32(IoC, Q_ADDR(QuIoOffs, Q_CSR), &QuCsr); } - + return(QuCsr); } /* TestStopBit */ @@ -1506,7 +1506,7 @@ int RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */ if ((Dir & SK_STOP_TX) != 0) { /* disable receiver and transmitter */ SkMacRxTxDisable(pAC, IoC, Port); - + /* stop both transmit queues */ /* * If the BMU is in the reset state CSR_STOP will terminate @@ -1582,11 +1582,11 @@ int RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */ else { SkMacHardRst(pAC, IoC, Port); } - + /* Disable Force Sync bit and Enable Alloc bit */ SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); - + /* Stop Interval Timer and Limit Counter of Tx Arbiter */ SK_OUT32(IoC, MR_ADDR(Port, TXA_ITI_INI), 0L); SK_OUT32(IoC, MR_ADDR(Port, TXA_LIM_INI), 0L); @@ -1601,7 +1601,7 @@ int RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */ SK_OUT8(IoC, RB_ADDR(pPrt->PXaQOff, RB_CTRL), RB_RST_SET); /* Reset the RAM Buffer sync Tx queue */ SK_OUT8(IoC, RB_ADDR(pPrt->PXsQOff, RB_CTRL), RB_RST_SET); - + /* Reset Tx MAC FIFO */ if (pAC->GIni.GIGenesis) { /* Note: MFF_RST_SET does NOT reset the XMAC ! */ @@ -1626,7 +1626,7 @@ int RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */ */ /* stop the port's receive queue */ SK_OUT32(IoC, Q_ADDR(pPrt->PRxQOff, Q_CSR), CSR_STOP); - + i = 100; do { /* @@ -1635,7 +1635,7 @@ int RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */ */ SK_OUT16(IoC, B3_PA_CTRL, (Port == MAC_1) ? PA_CLR_TO_RX1 : PA_CLR_TO_RX2); - + DWord = TestStopBit(pAC, IoC, pPrt->PRxQOff); /* timeout if i==0 (bug fix for #10748) */ @@ -1662,7 +1662,7 @@ int RstMode)/* Reset Mode (SK_SOFT_RST, SK_HARD_RST) */ /* Reset Rx MAC FIFO */ if (pAC->GIni.GIGenesis) { - + SK_OUT8(IoC, MR_ADDR(Port, RX_MFF_CTRL2), MFF_RST_SET); /* switch Rx LED off, stop the LED counter */ @@ -1773,7 +1773,7 @@ SK_IOC IoC) /* IO context */ /* We know the RAM Interface Arbiter is enabled. */ SkPciWriteCfgWord(pAC, PCI_PM_CTL_STS, PCI_PM_STATE_D3); SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts); - + if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D3) { return(1); } @@ -1783,7 +1783,7 @@ SK_IOC IoC) /* IO context */ /* Check for D0 state. */ SkPciReadCfgWord(pAC, PCI_PM_CTL_STS, &PmCtlSts); - + if ((PmCtlSts & PCI_PM_STATE_MSK) != PCI_PM_STATE_D0) { return(1); } @@ -1794,7 +1794,7 @@ SK_IOC IoC) /* IO context */ SkPciReadCfgDWord(pAC, PCI_BASE_1ST, &Bp1); SkPciReadCfgDWord(pAC, PCI_BASE_2ND, &Bp2); SkPciReadCfgByte(pAC, PCI_LAT_TIM, &Lat); - + if (PciCmd != 0 || Cls != 0 || (Bp1 & 0xfffffff0L) != 0 || Bp2 != 1 || Lat != 0) { return(1); @@ -1863,7 +1863,7 @@ SK_IOC IoC) /* IO context */ * available on some platforms after 'boot time'. */ SK_IN16(IoC, PCI_C(PCI_STATUS), &Word); - + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); SK_OUT16(IoC, PCI_C(PCI_STATUS), Word | PCI_ERRBITS); SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF); @@ -1878,29 +1878,29 @@ SK_IOC IoC) /* IO context */ /* restore CLK_RUN bits */ SK_OUT16(IoC, B0_CTST, CtrlStat & (CS_CLK_RUN_HOT | CS_CLK_RUN_RST | CS_CLK_RUN_ENA)); - + /* read Chip Identification Number */ SK_IN8(IoC, B2_CHIP_ID, &Byte); pAC->GIni.GIChipId = Byte; - + /* read number of MACs */ SK_IN8(IoC, B2_MAC_CFG, &Byte); pAC->GIni.GIMacsFound = (Byte & CFG_SNG_MAC) ? 1 : 2; - + /* get Chip Revision Number */ pAC->GIni.GIChipRev = (SK_U8)((Byte & CFG_CHIP_R_MSK) >> 4); /* get diff. PCI parameters */ SK_IN16(IoC, B0_CTST, &CtrlStat); - + /* read the adapters RAM size */ SK_IN8(IoC, B2_E_0, &Byte); - + if (pAC->GIni.GIChipId == CHIP_ID_GENESIS) { pAC->GIni.GIGenesis = SK_TRUE; - if (Byte == 3) { + if (Byte == 3) { /* special case: 4 x 64k x 36, offset = 0x80000 */ pAC->GIni.GIRamSize = 1024; pAC->GIni.GIRamOffs = (SK_U32)512 * 1024; @@ -1911,7 +1911,7 @@ SK_IOC IoC) /* IO context */ } /* all GE adapters work with 53.125 MHz host clock */ pAC->GIni.GIHstClkFact = SK_FACT_53; - + /* set Descr. Poll Timer Init Value to 250 ms */ pAC->GIni.GIPollTimerVal = SK_DPOLL_DEF * (SK_U32)pAC->GIni.GIHstClkFact / 100; @@ -1923,12 +1923,12 @@ SK_IOC IoC) /* IO context */ pAC->GIni.GIRamSize = (Byte == 0) ? 128 : (int)Byte * 4; #else pAC->GIni.GIRamSize = 128; -#endif +#endif pAC->GIni.GIRamOffs = 0; - + /* WA for chip Rev. A */ pAC->GIni.GIWolOffs = (pAC->GIni.GIChipRev == 0) ? WOL_REG_OFFS : 0; - + /* get PM Capabilities of PCI config space */ SK_IN16(IoC, PCI_C(PCI_PM_CAP_REG), &Word); @@ -1939,16 +1939,16 @@ SK_IOC IoC) /* IO context */ /* set entry in GE init struct */ pAC->GIni.GIVauxAvail = SK_TRUE; } - + /* save Flash-Address Register */ SK_IN32(IoC, B2_FAR, &FlashAddr); /* test Flash-Address Register */ SK_OUT8(IoC, B2_FAR + 3, 0xff); SK_IN8(IoC, B2_FAR + 3, &Byte); - + pAC->GIni.GIYukonLite = (SK_BOOL)(Byte != 0); - + /* restore Flash-Address Register */ SK_OUT32(IoC, B2_FAR, FlashAddr); @@ -1961,13 +1961,13 @@ SK_IOC IoC) /* IO context */ } /* all YU chips work with 78.125 MHz host clock */ pAC->GIni.GIHstClkFact = SK_FACT_78; - + pAC->GIni.GIPollTimerVal = SK_DPOLL_MAX; /* 215 ms */ } /* check if 64-bit PCI Slot is present */ pAC->GIni.GIPciSlot64 = (SK_BOOL)((CtrlStat & CS_BUS_SLOT_SZ) != 0); - + /* check if 66 MHz PCI Clock is active */ pAC->GIni.GIPciClock66 = (SK_BOOL)((CtrlStat & CS_BUS_CLOCK) != 0); @@ -1984,7 +1984,7 @@ SK_IOC IoC) /* IO context */ Byte &= 0x0f; /* the PHY type is stored in the lower nibble */ for (i = 0; i < pAC->GIni.GIMacsFound; i++) { - + if (pAC->GIni.GIGenesis) { switch (Byte) { case SK_PHY_XMAC: @@ -2016,7 +2016,7 @@ SK_IOC IoC) /* IO context */ pAC->GIni.GICopperType = SK_TRUE; } pAC->GIni.GP[i].PhyAddr = PHY_ADDR_MARV; - + if (pAC->GIni.GICopperType) { pAC->GIni.GP[i].PLinkSpeedCap = SK_LSPEED_CAP_AUTO | SK_LSPEED_CAP_10MBPS | SK_LSPEED_CAP_100MBPS | @@ -2029,14 +2029,14 @@ SK_IOC IoC) /* IO context */ Byte = SK_PHY_MARV_FIBER; } } - + pAC->GIni.GP[i].PhyType = Byte; - + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_INIT, ("PHY type: %d PHY addr: %04x\n", Byte, pAC->GIni.GP[i].PhyAddr)); } - + /* get Mac Type & set function pointers dependent on */ if (pAC->GIni.GIGenesis) { pAC->GIni.GIMacType = SK_MAC_XMAC; @@ -2053,7 +2053,7 @@ SK_IOC IoC) /* IO context */ pAC->GIni.GIFunc.pFnMacStatistic = SkGmMacStatistic; pAC->GIni.GIFunc.pFnMacResetCounter = SkGmResetCounter; pAC->GIni.GIFunc.pFnMacOverflow = SkGmOverflowStatus; - + #ifdef SPECIAL_HANDLING if (pAC->GIni.GIChipId == CHIP_ID_YUKON) { /* check HW self test result */ @@ -2183,7 +2183,7 @@ int Level) /* initialization level */ SkGeInit0(pAC, IoC); pAC->GIni.GILevel = SK_INIT_DATA; break; - + case SK_INIT_IO: /* Initialization Level 1 */ RetVal = SkGeInit1(pAC, IoC); @@ -2195,7 +2195,7 @@ int Level) /* initialization level */ SK_OUT32(IoC, B2_IRQM_INI, 0x11335577L); SK_IN32(IoC, B2_IRQM_INI, &DWord); SK_OUT32(IoC, B2_IRQM_INI, 0L); - + if (DWord != 0x11335577L) { RetVal = 2; break; @@ -2210,7 +2210,7 @@ int Level) /* initialization level */ /* Level 1 successfully passed */ pAC->GIni.GILevel = SK_INIT_IO; break; - + case SK_INIT_RUN: /* Initialization Level 2 */ if (pAC->GIni.GILevel != SK_INIT_IO) { @@ -2225,7 +2225,7 @@ int Level) /* initialization level */ /* Level 2 successfully passed */ pAC->GIni.GILevel = SK_INIT_RUN; break; - + default: SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E003, SKERR_HWI_E003MSG); RetVal = 3; @@ -2274,7 +2274,7 @@ SK_IOC IoC) /* IO context */ * available on some platforms after 'boot time'. */ SK_IN16(IoC, PCI_C(PCI_STATUS), &Word); - + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); SK_OUT16(IoC, PCI_C(PCI_STATUS), Word | PCI_ERRBITS); SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF); @@ -2325,7 +2325,7 @@ int Port) /* Port to configure */ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E004, SKERR_HWI_E004MSG); return(1); } - + if (pPrt->PState == SK_PRT_INIT || pPrt->PState == SK_PRT_RUN) { SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E005, SKERR_HWI_E005MSG); return(2); @@ -2342,25 +2342,25 @@ int Port) /* Port to configure */ SkGeXmitLED(pAC, IoC, MR_ADDR(Port, TX_LED_INI), SK_LED_ENA); SkGeXmitLED(pAC, IoC, MR_ADDR(Port, RX_LED_INI), SK_LED_ENA); /* The Link LED is initialized by RLMT or Diagnostics itself */ - + SkXmInitMac(pAC, IoC, Port); } else { SkGmInitMac(pAC, IoC, Port); } - + /* do NOT initialize the Link Sync Counter */ SkGeInitMacFifo(pAC, IoC, Port); - + SkGeInitRamBufs(pAC, IoC, Port); - + if (pPrt->PXSQSize != 0) { /* enable Force Sync bit if synchronous queue available */ SK_OUT8(IoC, MR_ADDR(Port, TXA_CTRL), TXA_ENA_FSYNC); } - + SkGeInitBmu(pAC, IoC, Port); /* mark port as initialized */ diff --git a/drivers/sk98lin/skgemib.c b/drivers/sk98lin/skgemib.c index ab85ccd4e4..4a9e9e6af1 100644 --- a/drivers/sk98lin/skgemib.c +++ b/drivers/sk98lin/skgemib.c @@ -28,26 +28,26 @@ * $Log: skgemib.c,v $ * Revision 1.7 2002/12/16 09:04:34 tschilli * Code for VCT handling added. - * + * * Revision 1.6 2002/08/09 15:40:21 rwahl * Editorial change (renamed ConfSpeedCap). - * + * * Revision 1.5 2002/08/09 11:05:34 rwahl * Added oid handling for link speed cap. - * + * * Revision 1.4 2002/08/09 09:40:27 rwahl * Added support for NDIS OID_PNP_xxx. - * + * * Revision 1.3 2002/07/17 19:39:54 rwahl * Added handler for OID_SKGE_SPEED_MODE & OID_SKGE_SPEED_STATUS. - * + * * Revision 1.2 2002/05/22 08:59:00 rwahl * - static functions only for release build. * - Source file must be included. - * + * * Revision 1.1 2002/05/22 08:12:42 rwahl * Initial version. - * + * ****************************************************************************/ #include <config.h> @@ -107,7 +107,6 @@ PNMI_STATIC int PowerManagement(SK_AC *pAC, SK_IOC IoC, int action, SK_U32 Id, #endif - /* defines *******************************************************************/ #define ID_TABLE_SIZE (sizeof(IdTable)/sizeof(IdTable[0])) @@ -321,7 +320,7 @@ PNMI_STATIC const SK_PNMI_TAB_ENTRY IdTable[] = { sizeof(SK_PNMI_VPD), SK_PNMI_OFF(Vpd) + SK_PNMI_VPD_OFF(VpdAction), SK_PNMI_RW, Vpd, 0}, - {OID_SKGE_PORT_NUMBER, + {OID_SKGE_PORT_NUMBER, 1, 0, SK_PNMI_MAI_OFF(PortNumber), diff --git a/drivers/sk98lin/skgepnmi.c b/drivers/sk98lin/skgepnmi.c index d1c1a3e7d0..b5d32b04c1 100644 --- a/drivers/sk98lin/skgepnmi.c +++ b/drivers/sk98lin/skgepnmi.c @@ -28,29 +28,29 @@ * $Log: skgepnmi.c,v $ * Revision 1.102 2002/12/16 14:03:24 tschilli * VCT code in Vct() changed. - * + * * Revision 1.101 2002/12/16 09:04:10 tschilli * Code for VCT handling added. - * + * * Revision 1.100 2002/09/26 14:28:13 tschilli * For XMAC the values in the SK_PNMI_PORT Port struct are copied to * the new SK_PNMI_PORT BufPort struct during a MacUpdate() call. * These values are used when GetPhysStatVal() is called. With this * mechanism you get the best results when software corrections for * counters are needed. Example: RX_LONGFRAMES. - * + * * Revision 1.99 2002/09/17 12:31:19 tschilli * OID_SKGE_TX_HW_ERROR_CTS, OID_SKGE_OUT_ERROR_CTS, OID_GEN_XMIT_ERROR: * Double count of SK_PNMI_HTX_EXCESS_COL in function General() removed. * OID_PNP_CAPABILITIES: sizeof(SK_PM_WAKE_UP_CAPABILITIES) changed to * sizeof(SK_PNP_CAPABILITIES) in function PowerManagement(). - * + * * Revision 1.98 2002/09/10 09:00:03 rwahl * Adapted boolean definitions according sktypes. - * + * * Revision 1.97 2002/09/05 15:07:03 rwahl * Editorial changes. - * + * * Revision 1.96 2002/09/05 11:04:14 rwahl * - Rx/Tx packets statistics of virtual port were zero on link down (#10750) * - For GMAC the overflow IRQ for Rx longframe counter was not counted. @@ -58,23 +58,23 @@ * OID_SKGE_IN_ERRORS_CTS, OID_GEN_RCV_ERROR. * - Moved correction for OID_SKGE_STAT_RX_TOO_LONG to GetPhysStatVal(). * - Editorial changes. - * + * * Revision 1.95 2002/09/04 08:53:37 rwahl * - Incorrect statistics for Rx_too_long counter with jumbo frame (#10751) * - StatRxFrameTooLong & StatRxPMaccErr counters were not reset. * - Fixed compiler warning for debug msg arg types. - * + * * Revision 1.94 2002/08/09 15:42:14 rwahl * - Fixed StatAddr table for GMAC. * - VirtualConf(): returned indeterminated status for speed oids if no * active port. - * + * * Revision 1.93 2002/08/09 11:04:59 rwahl * Added handler for link speed caps. - * + * * Revision 1.92 2002/08/09 09:43:03 rwahl * - Added handler for NDIS OID_PNP_xxx ids. - * + * * Revision 1.91 2002/07/17 19:53:03 rwahl * - Added StatOvrflwBit table for XMAC & GMAC. * - Extended StatAddr table for GMAC. Added check of number of counters @@ -86,51 +86,51 @@ * - Added handler for oids SKGE_SPEED_MODE & SKGE_SPEED_STATUS. * - Extendet GetPhysStatVal() for GMAC. * - Editorial changes. - * + * * Revision 1.90 2002/05/22 08:56:25 rwahl * - Moved OID table to separate source file. * - Fix: TX_DEFFERAL counter incremented in full-duplex mode. * - Use string definitions for error msgs. - * + * * Revision 1.89 2001/09/18 10:01:30 mkunz * some OID's fixed for dualnetmode - * + * * Revision 1.88 2001/08/02 07:58:08 rwahl * - Fixed NetIndex to csum module at ResetCounter(). - * + * * Revision 1.87 2001/04/06 13:35:09 mkunz * -Bugs fixed in handling of OID_SKGE_MTU and the VPD OID's - * + * * Revision 1.86 2001/03/09 09:18:03 mkunz * Changes in SK_DBG_MSG - * + * * Revision 1.85 2001/03/08 09:37:31 mkunz * Bugfix in ResetCounter for Pnmi.Port structure - * + * * Revision 1.84 2001/03/06 09:04:55 mkunz * Made some changes in instance calculation - * + * * Revision 1.83 2001/02/15 09:15:32 mkunz * Necessary changes for dual net mode added - * + * * Revision 1.82 2001/02/07 08:24:19 mkunz * -Made changes in handling of OID_SKGE_MTU - * + * * Revision 1.81 2001/02/06 09:58:00 mkunz * -Vpd bug fixed * -OID_SKGE_MTU added * -pnmi support for dual net mode. Interface function and macros extended - * + * * Revision 1.80 2001/01/22 13:41:35 rassmann * Supporting two nets on dual-port adapters. - * + * * Revision 1.79 2000/12/05 14:57:40 cgoos * SetStruct failed before first Link Up (link mode of virtual * port "INDETERMINATED"). - * + * * Revision 1.78 2000/09/12 10:44:58 cgoos * Fixed SK_PNMI_STORE_U32 calls with typecasted argument. - * + * * Revision 1.77 2000/09/07 08:10:19 rwahl * - Modified algorithm for 64bit NDIS statistic counters; * returns 64bit or 32bit value depending on passed buffer @@ -138,60 +138,60 @@ * buffer size is zero. OID_GEN_XMIT_ERROR, OID_GEN_RCV_ERROR, * and OID_GEN_RCV_NO_BUFFER handled as 64bit counter, too. * - corrected OID_SKGE_RLMT_PORT_PREFERRED. - * + * * Revision 1.76 2000/08/03 15:23:39 rwahl * - Correction for FrameTooLong counter has to be moved to OID handling * routines (instead of statistic counter routine). * - Fix in XMAC Reset Event handling: Only offset counter for hardware * statistic registers are updated. - * + * * Revision 1.75 2000/08/01 16:46:05 rwahl * - Added StatRxLongFrames counter and correction of FrameTooLong counter. * - Added directive to control width (default = 32bit) of NDIS statistic * counters (SK_NDIS_64BIT_CTR). - * + * * Revision 1.74 2000/07/04 11:41:53 rwahl * - Added volition connector type. - * + * * Revision 1.73 2000/03/15 16:33:10 rwahl * Fixed bug 10510; wrong reset of virtual port statistic counters. - * + * * Revision 1.72 1999/12/06 16:15:53 rwahl * Fixed problem of instance range for current and factory MAC address. - * + * * Revision 1.71 1999/12/06 10:14:20 rwahl * Fixed bug 10476; set operation for PHY_OPERATION_MODE. - * + * * Revision 1.70 1999/11/22 13:33:34 cgoos * Changed license header to GPL. - * + * * Revision 1.69 1999/10/18 11:42:15 rwahl * Added typecasts for checking event dependent param (debug only). - * + * * Revision 1.68 1999/10/06 09:35:59 cgoos * Added state check to PHY_READ call (hanged if called during startup). - * + * * Revision 1.67 1999/09/22 09:53:20 rwahl * - Read Broadcom register for updating fcs error counter (1000Base-T). * * Revision 1.66 1999/08/26 13:47:56 rwahl * Added SK_DRIVER_SENDEVENT when queueing RLMT_CHANGE_THRES trap. - * + * * Revision 1.65 1999/07/26 07:49:35 cgoos * Added two typecasts to avoid compiler warnings. - * + * * Revision 1.64 1999/05/20 09:24:12 cgoos * Changes for 1000Base-T (sensors, Master/Slave). * * Revision 1.63 1999/04/13 15:11:58 mhaveman * Moved include of rlmt.h to header skgepnmi.h because some macros * are needed there. - * + * * Revision 1.62 1999/04/13 15:08:07 mhaveman * Replaced again SK_RLMT_CHECK_LINK with SK_PNMI_RLMT_MODE_CHK_LINK * to grant unified interface by only using the PNMI header file. * SK_PNMI_RLMT_MODE_CHK_LINK is defined the same as SK_RLMT_CHECK_LINK. - * + * * Revision 1.61 1999/04/13 15:02:48 mhaveman * Changes caused by review: * -Changed some comments @@ -199,21 +199,21 @@ * -Optimized PRESET check. * -Meaning of error SK_ADDR_DUPLICATE_ADDRESS changed. Set of same * address will now not cause this error. Removed corresponding check. - * + * * Revision 1.60 1999/03/23 10:41:23 mhaveman * Added comments. - * + * * Revision 1.59 1999/02/19 08:01:28 mhaveman * Fixed bug 10372 that after counter reset all ports were displayed * as inactive. - * + * * Revision 1.58 1999/02/16 18:04:47 mhaveman * Fixed problem of twisted OIDs SENSOR_WAR_TIME and SENSOR_ERR_TIME. - * + * * Revision 1.56 1999/01/27 12:29:11 mhaveman * SkTimerStart was called with time value in milli seconds but needs * micro seconds. - * + * * Revision 1.55 1999/01/25 15:00:38 mhaveman * Added support to allow multiple ports to be active. If this feature in * future will be used, the Management Data Base variables PORT_ACTIVE @@ -223,32 +223,32 @@ * physical ports. A get returns the melted values of all active physical * ports. If the port values differ a return value INDETERMINATED will * be returned. This effects especially the CONF group. - * + * * Revision 1.54 1999/01/19 10:10:22 mhaveman * -Fixed bug 10354: Counter values of virtual port were wrong after port * switches * -Added check if a switch to the same port is notified. - * + * * Revision 1.53 1999/01/07 09:25:21 mhaveman * Forgot to initialize a variable. - * + * * Revision 1.52 1999/01/05 10:34:33 mhaveman * Fixed little error in RlmtChangeEstimate calculation. - * + * * Revision 1.51 1999/01/05 09:59:07 mhaveman * -Moved timer start to init level 2 * -Redesigned port switch average calculation to avoid 64bit * arithmetic. - * + * * Revision 1.50 1998/12/10 15:13:59 mhaveman * -Fixed: PHYS_CUR_ADDR returned wrong addresses * -Fixed: RLMT_PORT_PREFERED and RLMT_CHANGE_THRES preset returned * always BAD_VALUE. * -Fixed: TRAP buffer seemed to sometimes suddenly empty - * + * * Revision 1.49 1998/12/09 16:17:07 mhaveman * Fixed: Couldnot delete VPD keys on UNIX. - * + * * Revision 1.48 1998/12/09 14:11:10 mhaveman * -Add: Debugmessage for XMAC_RESET supressed to minimize output. * -Fixed: RlmtChangeThreshold will now be initialized. @@ -256,7 +256,7 @@ * -Fixed: On VPD key creation an invalid key name could be created * (e.g. A5) * -Some minor changes in comments and code. - * + * * Revision 1.47 1998/12/08 16:00:31 mhaveman * -Fixed: For RLMT_PORT_ACTIVE will now be returned a 0 if no port * is active. @@ -275,11 +275,11 @@ * to 0, an error should be returned by the caller. * -Fixed: Wrong number of instances with RLMT statistic. * -Fixed: Return now SK_LMODE_STAT_UNKNOWN if the LinkModeStatus is 0. - * + * * Revision 1.45 1998/12/03 17:17:24 mhaveman * -Removed for VPD create action the buffer size limitation to 4 bytes. * -Pass now physical/active physical port to ADDR for CUR_ADDR set - * + * * Revision 1.44 1998/12/03 15:14:35 mhaveman * Another change to Vpd instance evaluation. * @@ -289,36 +289,36 @@ * * Revision 1.42 1998/12/03 11:31:47 mhaveman * Inserted cast to satisfy lint. - * + * * Revision 1.41 1998/12/03 11:28:16 mhaveman * Removed SK_PNMI_CHECKPTR - * + * * Revision 1.40 1998/12/03 11:19:07 mhaveman * Fixed problems * -A set to virtual port will now be ignored. A set with broadcast * address to any port will be ignored. * -GetStruct function made VPD instance calculation wrong. * -Prefered port returned -1 instead of 0. - * + * * Revision 1.39 1998/11/26 15:30:29 mhaveman * Added sense mode to link mode. - * + * * Revision 1.38 1998/11/23 15:34:00 mhaveman * -Fixed bug for RX counters. On an RX overflow interrupt the high * words of all RX counters were incremented. * -SET operations on FLOWCTRL_MODE and LINK_MODE accept now the * value 0, which has no effect. It is usefull for multiple instance * SETs. - * + * * Revision 1.37 1998/11/20 08:02:04 mhaveman * -Fixed: Ports were compared with MAX_SENSORS * -Fixed: Crash in GetTrapEntry with MEMSET macro * -Fixed: Conversions between physical, logical port index and instance - * + * * Revision 1.36 1998/11/16 07:48:53 mhaveman * Casted SK_DRIVER_SENDEVENT with (void) to eleminate compiler warnings * on Solaris. - * + * * Revision 1.35 1998/11/16 07:45:34 mhaveman * SkAddrOverride now returns value and will be checked. * @@ -327,14 +327,14 @@ * of needed buffer space on TOO_SHORT errors. Therefore all * SkPnmiGet/Preset/Set functions now have a pointer to the length * parameter, where the needed space on error is returned. - * + * * Revision 1.33 1998/11/03 13:52:46 mhaveman * Made file lint conform. - * + * * Revision 1.32 1998/11/03 13:19:07 mhaveman * The events SK_HWEV_SET_LMODE and SK_HWEV_SET_FLOWMODE pass now in * Para32[0] the physical MAC index and in Para32[1] the new mode. - * + * * Revision 1.31 1998/11/03 12:30:40 gklug * fix: compiler warning memset * @@ -344,14 +344,14 @@ * * Revision 1.29 1998/11/02 11:23:54 mhaveman * Corrected SK_ERROR_LOG to SK_ERR_LOG. Sorry. - * + * * Revision 1.28 1998/11/02 10:47:16 mhaveman * Added syslog messages for internal errors. - * + * * Revision 1.27 1998/10/30 15:48:06 mhaveman * Fixed problems after simulation of SK_PNMI_EVT_CHG_EST_TIMER and * RlmtChangeThreshold calculation. - * + * * Revision 1.26 1998/10/29 15:36:55 mhaveman * -Fixed bug in trap buffer handling. * -OID_SKGE_DRIVER_DESCR, OID_SKGE_DRIVER_VERSION, OID_SKGE_HW_DESCR, @@ -361,10 +361,10 @@ * -Perform a RlmtUpdate during SK_PNMI_EVT_XMAC_RESET to minimize * RlmtUpdate calls in GetStatVal. * -Inserted SK_PNMI_CHECKFLAGS macro increase readability. - * + * * Revision 1.25 1998/10/29 08:50:36 mhaveman * Fixed problems after second event simulation. - * + * * Revision 1.24 1998/10/28 08:44:37 mhaveman * -Fixed alignment problem * -Fixed problems during event simulation @@ -374,19 +374,19 @@ * * Revision 1.23 1998/10/23 10:16:37 mhaveman * Fixed bugs after buffer test simulation. - * + * * Revision 1.22 1998/10/21 13:23:52 mhaveman * -Call syntax of SkOsGetTime() changed to SkOsGetTime(pAc). * -Changed calculation of hundrets of seconds. * * Revision 1.20 1998/10/20 07:30:45 mhaveman * Made type changes to unsigned integer where possible. - * + * * Revision 1.19 1998/10/19 10:51:30 mhaveman * -Made Bug fixes after simulation run * -Renamed RlmtMAC... to RlmtPort... * -Marked workarounds with Errata comments - * + * * Revision 1.18 1998/10/14 07:50:08 mhaveman * -For OID_SKGE_LINK_STATUS the link down detection has moved from RLMT * to HWACCESS. @@ -401,21 +401,21 @@ * Revision 1.16 1998/10/07 10:52:49 mhaveman * -Inserted handling of some OID_GEN_ Ids for windows * -Fixed problem with 803.2 statistic. - * + * * Revision 1.15 1998/10/01 09:16:29 mhaveman * Added Debug messages for function call and UpdateFlag tracing. - * + * * Revision 1.14 1998/09/30 13:39:09 mhaveman * -Reduced namings of 'MAC' by replacing them with 'PORT'. * -Completed counting of OID_SKGE_RX_HW_ERROR_CTS, * OID_SKGE_TX_HW_ERROR_CTS, * OID_SKGE_IN_ERRORS_CTS, and OID_SKGE_OUT_ERROR_CTS. * -SET check for RlmtMode - * + * * Revision 1.13 1998/09/28 13:13:08 mhaveman * Hide strcmp, strlen, and strncpy behind macros SK_STRCMP, SK_STRLEN, * and SK_STRNCPY. (Same reasons as for mem.. and MEM..) - * + * * Revision 1.12 1998/09/16 08:18:36 cgoos * Fix: XM_INxx and XM_OUTxx called with different parameter order: * sometimes IoC,Mac,... sometimes Mac,IoC,... Now always first variant. @@ -425,10 +425,10 @@ * Revision 1.11 1998/09/04 17:01:45 mhaveman * Added SyncCounter as macro and OID_SKGE_.._NO_DESCR_CTS to * OID_SKGE_RX_NO_BUF_CTS. - * + * * Revision 1.10 1998/09/04 14:35:35 mhaveman * Added macro counters, that are counted by driver. - * + * ****************************************************************************/ @@ -476,9 +476,9 @@ int SkPnmiSetVar(SK_AC *pAC, SK_IOC IoC, SK_U32 Id, void *pBuf, unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); int SkPnmiGetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, unsigned int *pLen, SK_U32 NetIndex); -int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, +int SkPnmiPreSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, unsigned int *pLen, SK_U32 NetIndex); -int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, +int SkPnmiSetStruct(SK_AC *pAC, SK_IOC IoC, void *pBuf, unsigned int *pLen, SK_U32 NetIndex); int SkPnmiEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Param); @@ -534,7 +534,7 @@ PNMI_STATIC void CheckVctStatus(SK_AC *, SK_IOC, char *, SK_U32, SK_U32); /* * Overflow status register bit table and corresponding counter * dependent on MAC type - the number relates to the size of overflow - * mask returned by the pFnMacOverflow function + * mask returned by the pFnMacOverflow function */ PNMI_STATIC const SK_U16 StatOvrflwBit[][SK_PNMI_MAC_TYPES] = { /* Bit0 */ { SK_PNMI_HTX, SK_PNMI_HTX_UNICAST}, @@ -794,7 +794,7 @@ int Level) /* Initialization level */ #ifdef SK_PNMI_CHECK if (SK_PNMI_MAX_IDX != SK_PNMI_CNT_NO) { - + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR049, SK_PNMI_ERR049MSG); SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL, @@ -806,13 +806,13 @@ int Level) /* Initialization level */ if (SK_PNMI_MAX_IDX != (sizeof(StatAddr) / (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES))) { - + SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR050, SK_PNMI_ERR050MSG); SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_INIT | SK_DBGCAT_FATAL, ("StatAddr table size (%d) differs from " "SK_PNMI_MAX_IDX (%d)\n", - (sizeof(StatAddr) / + (sizeof(StatAddr) / (sizeof(SK_PNMI_STATADDR) * SK_PNMI_MAC_TYPES)), SK_PNMI_MAX_IDX)); BRK; @@ -830,15 +830,15 @@ int Level) /* Initialization level */ pAC->GIni.GIFunc.pFnMacResetCounter(pAC, IoC, PortIndex); } - - /* Initialize DSP variables for Vct() to 0xff => Never written! */ + + /* Initialize DSP variables for Vct() to 0xff => Never written! */ for (PortIndex = 0; PortIndex < PortMax; PortIndex ++) { pPrt = &pAC->GIni.GP[PortIndex]; pPrt->PCableLen =0xff; pVctBackupData = &pAC->Pnmi.VctBackup[PortIndex]; pVctBackupData->PCableLen = 0xff; } - + /* * Get pci bus speed */ @@ -962,9 +962,9 @@ int Level) /* Initialization level */ default: pAC->Pnmi.Connector = 1; break; - } + } break; - + case SK_INIT_RUN: /* * Start timer for RLMT change counter @@ -1120,7 +1120,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ * SK_PNMI_ERR_GENERAL A general severe internal error occured * SK_PNMI_ERR_TOO_SHORT The passed buffer is too short to take * the data. - * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist + * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist */ int SkPnmiGetStruct( SK_AC *pAC, /* Pointer to adapter context */ @@ -1250,7 +1250,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ */ if (Ret == SK_PNMI_ERR_UNKNOWN_INST) { - break; + break; } if (Ret != SK_PNMI_ERR_OK) { @@ -1311,8 +1311,8 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ ("PNMI: SkPnmiPreSetStruct: Called, BufLen=%d, NetIndex=%d\n", *pLen, NetIndex)); - return (PnmiStruct(pAC, IoC, SK_PNMI_PRESET, (char *)pBuf, - pLen, NetIndex)); + return (PnmiStruct(pAC, IoC, SK_PNMI_PRESET, (char *)pBuf, + pLen, NetIndex)); } /***************************************************************************** @@ -1349,8 +1349,8 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ ("PNMI: SkPnmiSetStruct: Called, BufLen=%d, NetIndex=%d\n", *pLen, NetIndex)); - return (PnmiStruct(pAC, IoC, SK_PNMI_SET, (char *)pBuf, - pLen, NetIndex)); + return (PnmiStruct(pAC, IoC, SK_PNMI_SET, (char *)pBuf, + pLen, NetIndex)); } /***************************************************************************** @@ -1444,7 +1444,7 @@ SK_EVPARA Param) /* Event dependent parameter */ SK_PNMI_CHECKFLAGS("SkPnmiEvent: On call"); MacType = pAC->GIni.GIMacType; - + switch (Event) { case SK_PNMI_EVT_SIRQ_OVERFLOW: @@ -1470,7 +1470,7 @@ SK_EVPARA Param) /* Event dependent parameter */ (OverflowStatus == 0)) { SK_PNMI_CHECKFLAGS("SkPnmiEvent: On return"); - return (0); + return (0); } /* @@ -1513,7 +1513,7 @@ SK_EVPARA Param) /* Event dependent parameter */ case SK_PNMI_HRX_OCTETLOW: case SK_PNMI_HRX_IRLENGTH: case SK_PNMI_HRX_RESERVED: - + /* * the following counters aren't be handled (id > 63) */ @@ -1594,7 +1594,7 @@ SK_EVPARA Param) /* Event dependent parameter */ (unsigned int)Param.Para64); (void)SK_DRIVER_SENDEVENT(pAC, IoC); break; - + case SK_PNMI_EVT_SEN_ERR_UPP: #ifdef DEBUG if ((unsigned int)Param.Para64 >= (unsigned int)pAC->I2c.MaxSens) { @@ -1703,14 +1703,14 @@ SK_EVPARA Param) /* Event dependent parameter */ * Set all counters and timestamps to zero */ ResetCounter(pAC, IoC, NetIndex); /* the according NetIndex is required - as a Parameter of the Event */ + as a Parameter of the Event */ break; case SK_PNMI_EVT_XMAC_RESET: /* * To grant continuous counter values store the current * XMAC statistic values to the entries 1..n of the - * CounterOffset array. XMAC Errata #2 + * CounterOffset array. XMAC Errata #2 */ #ifdef DEBUG if ((unsigned int)Param.Para64 >= SK_MAX_MACS) { @@ -1763,7 +1763,7 @@ SK_EVPARA Param) /* Event dependent parameter */ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_UP parameter" - " wrong, PhysPortIndex=%d\n", PhysPortIndex)); + " wrong, PhysPortIndex=%d\n", PhysPortIndex)); return (0); } @@ -1781,15 +1781,15 @@ SK_EVPARA Param) /* Event dependent parameter */ /* Add incremental difference to offset (#10620)*/ (void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex, XM_RXE_SHT_ERR, &Val32); - + Value = (((SK_U64)pAC->Pnmi.Port[PhysPortIndex]. CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32); pAC->Pnmi.Port[PhysPortIndex].CounterOffset[SK_PNMI_HRX_SHORTS] += Value - pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark; } - + /* Tell VctStatus() that a link was up meanwhile. */ - pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_LINK; + pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_LINK; break; case SK_PNMI_EVT_RLMT_PORT_DOWN: @@ -1800,7 +1800,7 @@ SK_EVPARA Param) /* Event dependent parameter */ SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_CTRL, ("PNMI: ERR: SkPnmiEvent: SK_PNMI_EVT_RLMT_PORT_DOWN parameter" - " wrong, PhysPortIndex=%d\n", PhysPortIndex)); + " wrong, PhysPortIndex=%d\n", PhysPortIndex)); return (0); } @@ -1811,13 +1811,13 @@ SK_EVPARA Param) /* Event dependent parameter */ */ QueueRlmtPortTrap(pAC, OID_SKGE_TRAP_RLMT_PORT_DOWN, PhysPortIndex); (void)SK_DRIVER_SENDEVENT(pAC, IoC); - + /* Bugfix #10620 - get zero level for incremental difference */ if ((pAC->GIni.GIMacType == SK_MAC_XMAC)) { (void)pAC->GIni.GIFunc.pFnMacStatistic(pAC, IoC, PhysPortIndex, XM_RXE_SHT_ERR, &Val32); - pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark = + pAC->Pnmi.Port[PhysPortIndex].RxShortZeroMark = (((SK_U64)pAC->Pnmi.Port[PhysPortIndex]. CounterHigh[SK_PNMI_HRX_SHORTS] << 32) | (SK_U64)Val32); } @@ -2007,7 +2007,7 @@ SK_EVPARA Param) /* Event dependent parameter */ * Param.Para32[1] is reserved, contains -1. */ /* - * Check number of nets + * Check number of nets */ MaxNetNumber = pAC->GIni.GIMacsFound; if (((unsigned int)Param.Para32[0] < 1) @@ -2015,19 +2015,19 @@ SK_EVPARA Param) /* Event dependent parameter */ return (SK_PNMI_ERR_UNKNOWN_NET); } - if ((unsigned int)Param.Para32[0] == 1) { /* single net mode */ - pAC->Pnmi.DualNetActiveFlag = SK_FALSE; - } - else { /* dual net mode */ - pAC->Pnmi.DualNetActiveFlag = SK_TRUE; - } - break; + if ((unsigned int)Param.Para32[0] == 1) { /* single net mode */ + pAC->Pnmi.DualNetActiveFlag = SK_FALSE; + } + else { /* dual net mode */ + pAC->Pnmi.DualNetActiveFlag = SK_TRUE; + } + break; case SK_PNMI_EVT_VCT_RESET: PhysPortIndex = Param.Para32[0]; pPrt = &pAC->GIni.GP[PhysPortIndex]; pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex]; - + if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING) { RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE); if (RetCode == 2) { @@ -2045,7 +2045,7 @@ SK_EVPARA Param) /* Event dependent parameter */ pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING; pAC->Pnmi.VctStatus[PhysPortIndex] |= (SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE); - + /* Copy results for later use to PNMI struct. */ for (i = 0; i < 4; i++) { if (pPrt->PMdiPairLen[i] > 35) { @@ -2057,13 +2057,13 @@ SK_EVPARA Param) /* Event dependent parameter */ pVctBackupData->PMdiPairLen[i] = CableLength; pVctBackupData->PMdiPairSts[i] = pPrt->PMdiPairSts[i]; } - + Param.Para32[0] = PhysPortIndex; Param.Para32[1] = -1; SkEventQueue(pAC, SKGE_DRV, SK_DRV_PORT_RESET, Param); SkEventDispatcher(pAC, IoC); } - + break; default: @@ -2094,7 +2094,7 @@ SK_EVPARA Param) /* Event dependent parameter */ * Returns: * SK_PNMI_ERR_XXX. For details have a look to the description of the * calling functions. - * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist + * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist */ PNMI_STATIC int PnmiVar( SK_AC *pAC, /* Pointer to adapter context */ @@ -2115,9 +2115,9 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ *pLen = 0; return (SK_PNMI_ERR_UNKNOWN_OID); } - - /* - * Check NetIndex + + /* + * Check NetIndex */ if (NetIndex >= pAC->Rlmt.NumNets) { return (SK_PNMI_ERR_UNKNOWN_NET); @@ -2149,7 +2149,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ * * Returns: * SK_PNMI_ERR_XXX. The codes are described in the calling functions. - * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist + * SK_PNMI_ERR_UNKNOWN_NET The requested NetIndex doesn't exist */ PNMI_STATIC int PnmiStruct( SK_AC *pAC, /* Pointer to adapter context */ @@ -2182,14 +2182,14 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ *pLen = SK_PNMI_STRUCT_SIZE; return (SK_PNMI_ERR_TOO_SHORT); } - - /* - * Check NetIndex + + /* + * Check NetIndex */ if (NetIndex >= pAC->Rlmt.NumNets) { return (SK_PNMI_ERR_UNKNOWN_NET); } - + SK_PNMI_CHECKFLAGS("PnmiStruct: On call"); /* @@ -3546,7 +3546,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ *pLen = 0; return (SK_PNMI_ERR_GENERAL); } - + Val32 = (SK_U32)pVpdStatus->vpd_free_rw; SK_PNMI_STORE_U32(pBuf, Val32); *pLen = sizeof(SK_U32); @@ -3716,7 +3716,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ *pLen = 0; return (SK_PNMI_ERR_GENERAL); } - } + } else { /* The only OID which can be set is VPD_ACTION */ if (Id != OID_SKGE_VPD_ACTION) { @@ -3959,9 +3959,9 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ *pLen = 0; return (SK_PNMI_ERR_READ_ONLY); } - + MacType = pAC->GIni.GIMacType; - + /* * Check length for the various supported OIDs */ @@ -4099,7 +4099,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_TOO_LONG, NetIndex) + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_FCS, NetIndex) + GetStatVal(pAC, IoC, 0, SK_PNMI_HRX_CEXT, NetIndex); - break; + break; case OID_SKGE_TX_HW_ERROR_CTS: case OID_SKGE_OUT_ERROR_CTS: @@ -4330,7 +4330,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ else { Val64 = pAC->Pnmi.BufPort[0].TxSwQueueLen + pAC->Pnmi.BufPort[1].TxSwQueueLen; - } + } } else { /* Dual net mode */ @@ -4341,7 +4341,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ else { Val64 = pAC->Pnmi.Port[0].TxSwQueueLen + pAC->Pnmi.Port[1].TxSwQueueLen; - } + } } SK_PNMI_STORE_U64(pBuf, Val64); *pLen = sizeof(SK_U64); @@ -4619,7 +4619,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ } /* Single net mode */ else { - Val64 = Val64RxHwErrs + + Val64 = Val64RxHwErrs + pAC->Pnmi.BufPort[0].RxNoBufCts + pAC->Pnmi.BufPort[1].RxNoBufCts; } @@ -4631,7 +4631,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ } /* Single net mode */ else { - Val64 = Val64RxHwErrs + + Val64 = Val64RxHwErrs + pAC->Pnmi.Port[0].RxNoBufCts + pAC->Pnmi.Port[1].RxNoBufCts; } @@ -4649,7 +4649,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ } /* Single net mode */ else { - Val64 = Val64TxHwErrs + + Val64 = Val64TxHwErrs + pAC->Pnmi.BufPort[0].TxNoBufCts + pAC->Pnmi.BufPort[1].TxNoBufCts; } @@ -4661,7 +4661,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ } /* Single net mode */ else { - Val64 = Val64TxHwErrs + + Val64 = Val64TxHwErrs + pAC->Pnmi.Port[0].TxNoBufCts + pAC->Pnmi.Port[1].TxNoBufCts; } @@ -5418,7 +5418,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ } break; - case OID_SKGE_MTU: + case OID_SKGE_MTU: if (*pLen < sizeof(SK_U32)) { *pLen = sizeof(SK_U32); @@ -5465,7 +5465,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ case OID_SKGE_LINK_CAP: if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ if (LogPortIndex == 0) { - + /* Get value for virtual port */ VirtualConf(pAC, IoC, Id, pBuf + Offset); @@ -5481,7 +5481,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ Offset += sizeof(char); } else { /* DualNetMode */ - + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PLinkCap; Offset += sizeof(char); } @@ -5490,7 +5490,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ case OID_SKGE_LINK_MODE: if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ if (LogPortIndex == 0) { - + /* Get value for virtual port */ VirtualConf(pAC, IoC, Id, pBuf + Offset); @@ -5505,8 +5505,8 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ } Offset += sizeof(char); } - else { /* DualNetMode */ - + else { /* DualNetMode */ + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PLinkModeConf; Offset += sizeof(char); } @@ -5515,7 +5515,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ case OID_SKGE_LINK_MODE_STATUS: if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ if (LogPortIndex == 0) { - + /* Get value for virtual port */ VirtualConf(pAC, IoC, Id, pBuf + Offset); @@ -5540,7 +5540,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ case OID_SKGE_LINK_STATUS: if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ if (LogPortIndex == 0) { - + /* Get value for virtual port */ VirtualConf(pAC, IoC, Id, pBuf + Offset); @@ -5549,7 +5549,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ /* Get value for physical ports */ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( pAC, LogPortIndex); - + *(pBuf + Offset) = CalculateLinkStatus(pAC, IoC, PhysPortIndex); @@ -5566,7 +5566,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ case OID_SKGE_FLOWCTRL_CAP: if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ if (LogPortIndex == 0) { - + /* Get value for virtual port */ VirtualConf(pAC, IoC, Id, pBuf + Offset); @@ -5575,14 +5575,14 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ /* Get value for physical ports */ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( pAC, LogPortIndex); - + *(pBuf + Offset) = pAC->GIni.GP[ PhysPortIndex].PFlowCtrlCap; } Offset += sizeof(char); } else { /* DualNetMode */ - + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PFlowCtrlCap; Offset += sizeof(char); } @@ -5591,7 +5591,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ case OID_SKGE_FLOWCTRL_MODE: if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ if (LogPortIndex == 0) { - + /* Get value for virtual port */ VirtualConf(pAC, IoC, Id, pBuf + Offset); @@ -5600,7 +5600,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ /* Get value for physical port */ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( pAC, LogPortIndex); - + *(pBuf + Offset) = pAC->GIni.GP[ PhysPortIndex].PFlowCtrlMode; } @@ -5616,7 +5616,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ case OID_SKGE_FLOWCTRL_STATUS: if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ if (LogPortIndex == 0) { - + /* Get value for virtual port */ VirtualConf(pAC, IoC, Id, pBuf + Offset); @@ -5625,7 +5625,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ /* Get value for physical port */ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( pAC, LogPortIndex); - + *(pBuf + Offset) = pAC->GIni.GP[ PhysPortIndex].PFlowCtrlStatus; } @@ -5641,7 +5641,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ case OID_SKGE_PHY_OPERATION_CAP: if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ if (LogPortIndex == 0) { - + /* Get value for virtual port */ VirtualConf(pAC, IoC, Id, pBuf + Offset); @@ -5650,14 +5650,14 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ /* Get value for physical ports */ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( pAC, LogPortIndex); - + *(pBuf + Offset) = pAC->GIni.GP[ PhysPortIndex].PMSCap; } Offset += sizeof(char); } else { /* DualNetMode */ - + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PMSCap; Offset += sizeof(char); } @@ -5681,7 +5681,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ Offset += sizeof(char); } else { /* DualNetMode */ - + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PMSMode; Offset += sizeof(char); } @@ -5698,14 +5698,14 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ /* Get value for physical port */ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( pAC, LogPortIndex); - + *(pBuf + Offset) = pAC->GIni.GP[ PhysPortIndex].PMSStatus; } Offset += sizeof(char); } else { - + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PMSStatus; Offset += sizeof(char); } @@ -5714,7 +5714,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ case OID_SKGE_SPEED_CAP: if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ if (LogPortIndex == 0) { - + /* Get value for virtual port */ VirtualConf(pAC, IoC, Id, pBuf + Offset); @@ -5723,14 +5723,14 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ /* Get value for physical ports */ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( pAC, LogPortIndex); - + *(pBuf + Offset) = pAC->GIni.GP[ PhysPortIndex].PLinkSpeedCap; } Offset += sizeof(char); } else { /* DualNetMode */ - + *(pBuf + Offset) = pAC->GIni.GP[NetIndex].PLinkSpeedCap; Offset += sizeof(char); } @@ -5739,7 +5739,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ case OID_SKGE_SPEED_MODE: if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ if (LogPortIndex == 0) { - + /* Get value for virtual port */ VirtualConf(pAC, IoC, Id, pBuf + Offset); } @@ -5747,7 +5747,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ /* Get value for physical port */ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( pAC, LogPortIndex); - + *(pBuf + Offset) = pAC->GIni.GP[ PhysPortIndex].PLinkSpeed; } @@ -5763,7 +5763,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ case OID_SKGE_SPEED_STATUS: if (!pAC->Pnmi.DualNetActiveFlag) { /* SingleNetMode */ if (LogPortIndex == 0) { - + /* Get value for virtual port */ VirtualConf(pAC, IoC, Id, pBuf + Offset); } @@ -5771,7 +5771,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ /* Get value for physical port */ PhysPortIndex = SK_PNMI_PORT_LOG2PHYS( pAC, LogPortIndex); - + *(pBuf + Offset) = pAC->GIni.GP[ PhysPortIndex].PLinkSpeedUsed; } @@ -5783,7 +5783,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ Offset += sizeof(char); } break; - + case OID_SKGE_MTU: Val32 = SK_DRIVER_GET_MTU(pAC, IoC, NetIndex); SK_PNMI_STORE_U32(pBuf + Offset, Val32); @@ -6184,8 +6184,8 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ break; default: - SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, - ("MacPrivateConf: Unknown OID should be handled before set")); + SK_DBG_MSG(pAC, SK_DBGMOD_PNMI, SK_DBGCAT_ERR, + ("MacPrivateConf: Unknown OID should be handled before set")); *pLen = 0; return (SK_PNMI_ERR_GENERAL); @@ -6232,7 +6232,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ unsigned int Offset; unsigned int Entries; - + /* * Calculate instance if wished. */ @@ -6490,7 +6490,7 @@ char *pBuf) /* Buffer to which to mgmt data will be retrieved */ *pBuf = SK_FLOW_STAT_INDETERMINATED; } break; - + case OID_SKGE_PHY_OPERATION_CAP: /* Check if it is the first active port */ if (*pBuf == 0) { @@ -6544,7 +6544,7 @@ char *pBuf) /* Buffer to which to mgmt data will be retrieved */ *pBuf = SK_MS_STAT_INDETERMINATED; } break; - + case OID_SKGE_SPEED_MODE: /* Check if it is the first active port */ if (*pBuf == 0) { @@ -6563,7 +6563,7 @@ char *pBuf) /* Buffer to which to mgmt data will be retrieved */ *pBuf = SK_LSPEED_INDETERMINATED; } break; - + case OID_SKGE_SPEED_STATUS: /* Check if it is the first active port */ if (*pBuf == 0) { @@ -6617,7 +6617,7 @@ char *pBuf) /* Buffer to which to mgmt data will be retrieved */ case OID_SKGE_FLOWCTRL_STATUS: *pBuf = SK_FLOW_STAT_INDETERMINATED; break; - + case OID_SKGE_PHY_OPERATION_CAP: *pBuf = SK_MS_CAP_INDETERMINATED; break; @@ -6714,7 +6714,7 @@ unsigned int PhysPortIndex) /* Physical port index */ if (Result < SK_LMODE_STAT_HALF) { Result = SK_LMODE_STAT_UNKNOWN; - } + } else if (pAC->GIni.GP[PhysPortIndex].PLinkMode >= SK_LMODE_AUTOHALF) { /* @@ -6918,7 +6918,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ * Description: * The XMAC holds its statistic internally. To obtain the current * values we send a command so that the statistic data will - * be written to apredefined memory area on the adapter. + * be written to apredefined memory area on the adapter. * * Returns: * SK_PNMI_ERR_OK Task successfully performed. @@ -6945,15 +6945,15 @@ unsigned int LastMac) /* Index of the last Mac to be updated */ for (MacIndex = FirstMac; MacIndex <= LastMac; MacIndex ++) { /* - * 2002-09-13 pweber: Freeze the current sw counters. - * (That should be done as close as - * possible to the update of the + * 2002-09-13 pweber: Freeze the current sw counters. + * (That should be done as close as + * possible to the update of the * hw counters) */ if (pAC->GIni.GIMacType == SK_MAC_XMAC) { pAC->Pnmi.BufPort[MacIndex] = pAC->Pnmi.Port[MacIndex]; } - + /* 2002-09-13 pweber: Update the hw counter */ if (pAC->GIni.GIFunc.pFnMacUpdateStats(pAC, IoC, MacIndex) != 0) { @@ -7053,12 +7053,12 @@ unsigned int StatIndex) /* Index to statistic value */ SK_U32 HighVal = 0; SK_U16 Word; int MacType; - + SK_PNMI_PORT *pPnmiPrt; SK_GEMACFUNC *pFnMac; - + MacType = pAC->GIni.GIMacType; - + /* 2002-09-17 pweber: For XMAC, use the frozen sw counters (BufPort) */ if (pAC->GIni.GIMacType == SK_MAC_XMAC) { pPnmiPrt = &pAC->Pnmi.BufPort[PhysPortIndex]; @@ -7066,7 +7066,7 @@ unsigned int StatIndex) /* Index to statistic value */ else { pPnmiPrt = &pAC->Pnmi.Port[PhysPortIndex]; } - + pFnMac = &pAC->GIni.GIFunc; switch (StatIndex) { @@ -7074,9 +7074,9 @@ unsigned int StatIndex) /* Index to statistic value */ case SK_PNMI_HRX: /* Not supported by GMAC */ if (MacType == SK_MAC_GMAC) { - return (Val); + return (Val); } - + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, StatAddr[StatIndex][MacType].Reg, &LowVal); @@ -7112,7 +7112,7 @@ unsigned int StatIndex) /* Index to statistic value */ if (MacType == SK_MAC_GMAC) { Val = GetPhysStatVal(pAC, IoC, PhysPortIndex, SK_PNMI_HTX_PMACC); - return (Val); + return (Val); } (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, @@ -7135,13 +7135,12 @@ unsigned int StatIndex) /* Index to statistic value */ break; - case SK_PNMI_HTX_DEFFERAL: /* Not supported by GMAC */ if (MacType == SK_MAC_GMAC) { - return (Val); + return (Val); } - + /* * XMAC counts frames with deferred transmission * even in full-duplex mode. @@ -7174,7 +7173,7 @@ unsigned int StatIndex) /* Index to statistic value */ &HighVal); (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, StatAddr[StatIndex + 1][MacType].Reg, - &LowVal); + &LowVal); break; case SK_PNMI_HTX_OCTETLOW: @@ -7185,21 +7184,21 @@ unsigned int StatIndex) /* Index to statistic value */ case SK_PNMI_HRX_LONGFRAMES: /* For XMAC the SW counter is managed by PNMI */ if (MacType == SK_MAC_XMAC) { - return (pPnmiPrt->StatRxLongFrameCts); + return (pPnmiPrt->StatRxLongFrameCts); } - + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, StatAddr[StatIndex][MacType].Reg, &LowVal); HighVal = pPnmiPrt->CounterHigh[StatIndex]; break; - + case SK_PNMI_HRX_TOO_LONG: (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, StatAddr[StatIndex][MacType].Reg, &LowVal); HighVal = pPnmiPrt->CounterHigh[StatIndex]; - + Val = (((SK_U64)HighVal << 32) | (SK_U64)LowVal); switch (MacType) { @@ -7225,14 +7224,14 @@ unsigned int StatIndex) /* Index to statistic value */ LowVal = (SK_U32)Val; HighVal = (SK_U32)(Val >> 32); break; - + case SK_PNMI_HRX_SHORTS: /* Not supported by GMAC */ if (MacType == SK_MAC_GMAC) { /* GM_RXE_FRAG?? */ - return (Val); + return (Val); } - + /* * XMAC counts short frame errors even if link down (#10620) * @@ -7266,7 +7265,7 @@ unsigned int StatIndex) /* Index to statistic value */ /* Not supported by GMAC */ if (MacType == SK_MAC_GMAC) { /* GM_RXE_FRAG?? */ - return (Val); + return (Val); } (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, @@ -7278,9 +7277,9 @@ unsigned int StatIndex) /* Index to statistic value */ case SK_PNMI_HRX_PMACC_ERR: /* For GMAC the SW counter is managed by PNMI */ if (MacType == SK_MAC_GMAC) { - return (pPnmiPrt->StatRxPMaccErr); + return (pPnmiPrt->StatRxPMaccErr); } - + (void)pFnMac->pFnMacStatistic(pAC, IoC, PhysPortIndex, StatAddr[StatIndex][MacType].Reg, &LowVal); @@ -7300,8 +7299,8 @@ unsigned int StatIndex) /* Index to statistic value */ break; case SK_PNMI_HRX_FCS: - /* - * Broadcom filters fcs errors and counts it in + /* + * Broadcom filters fcs errors and counts it in * Receive Error Counter register */ if (pAC->GIni.GP[PhysPortIndex].PhyType == SK_PHY_BCOM) { @@ -7310,7 +7309,7 @@ unsigned int StatIndex) /* Index to statistic value */ PHY_READ(IoC, &pAC->GIni.GP[PhysPortIndex], PhysPortIndex, PHY_BCOM_RE_CTR, &Word); - + LowVal = Word; } HighVal = pPnmiPrt->CounterHigh[StatIndex]; @@ -7507,7 +7506,7 @@ unsigned int Size) /* Space needed for trap entry */ } } - /* + /* * Insert new entry as first entry. Newest entries are * stored at the beginning of the queue. */ @@ -7678,7 +7677,7 @@ unsigned int SensorIndex) /* Index of sensor which caused the trap */ Val32 = (SK_U32)SensorIndex; SK_PNMI_STORE_U32(pBuf + Offset + 5, Val32); Offset += 9; - + Val32 = (SK_U32)OID_SKGE_SENSOR_DESCR; SK_PNMI_STORE_U32(pBuf + Offset, Val32); *(pBuf + Offset + 4) = (char)DescrLen; @@ -7807,7 +7806,7 @@ SK_U32 Instance, /* Instance (1..n) that is to be queried or -1 */ unsigned int TableIndex, /* Index to the Id table */ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ { - + SK_U32 RetCode = SK_PNMI_ERR_GENERAL; /* @@ -7850,7 +7849,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ case OID_PNP_ADD_WAKE_UP_PATTERN: case OID_PNP_REMOVE_WAKE_UP_PATTERN: break; - + default: SK_ERR_LOG(pAC, SK_ERRCL_SW, SK_PNMI_ERR040, SK_PNMI_ERR040MSG); @@ -7869,8 +7868,8 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ case OID_PNP_QUERY_POWER: /* The Windows DDK describes: An OID_PNP_QUERY_POWER requests - the miniport to indicate whether it can transition its NIC - to the low-power state. + the miniport to indicate whether it can transition its NIC + to the low-power state. A miniport driver must always return NDIS_STATUS_SUCCESS to a query of OID_PNP_QUERY_POWER. */ RetCode = SK_PNMI_ERR_OK; @@ -7883,7 +7882,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ case OID_PNP_SET_POWER: case OID_PNP_ADD_WAKE_UP_PATTERN: case OID_PNP_REMOVE_WAKE_UP_PATTERN: - *pLen = 0; + *pLen = 0; RetCode = SK_PNMI_ERR_OK; break; @@ -7896,9 +7895,9 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ break; } - return (RetCode); + return (RetCode); } - + /* * From here SET or PRESET action. Check if the passed * buffer length is plausible. @@ -7923,7 +7922,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ if (*pLen < sizeof(SK_PM_PACKET_PATTERN)) { *pLen = 0; - return (SK_PNMI_ERR_BAD_VALUE); + return (SK_PNMI_ERR_BAD_VALUE); } break; @@ -7935,33 +7934,33 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode allways zero */ /* * Perform preset or set */ - + /* POWER module does not support PRESET action */ if (Action == SK_PNMI_PRESET) { - return (SK_PNMI_ERR_OK); + return (SK_PNMI_ERR_OK); } switch (Id) { case OID_PNP_SET_POWER: - RetCode = SkPowerSetPower(pAC, IoC, pBuf, pLen); + RetCode = SkPowerSetPower(pAC, IoC, pBuf, pLen); break; case OID_PNP_ADD_WAKE_UP_PATTERN: - RetCode = SkPowerAddWakeUpPattern(pAC, IoC, pBuf, pLen); + RetCode = SkPowerAddWakeUpPattern(pAC, IoC, pBuf, pLen); break; - + case OID_PNP_REMOVE_WAKE_UP_PATTERN: - RetCode = SkPowerRemoveWakeUpPattern(pAC, IoC, pBuf, pLen); + RetCode = SkPowerRemoveWakeUpPattern(pAC, IoC, pBuf, pLen); break; - + case OID_PNP_ENABLE_WAKE_UP: RetCode = SkPowerSetEnableWakeUp(pAC, IoC, pBuf, pLen); break; - + default: RetCode = SK_PNMI_ERR_GENERAL; } - + return (RetCode); } #endif /* SK_POWER_MGMT */ @@ -8010,25 +8009,25 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ int i; SK_EVPARA Para; SK_U32 CableLength; - + /* * Calculate the port indexes from the instance. */ PhysPortMax = pAC->GIni.GIMacsFound; LogPortMax = SK_PNMI_PORT_PHYS2LOG(PhysPortMax); - + /* Dual net mode? */ if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { LogPortMax--; } - + if ((Instance != (SK_U32) (-1))) { /* Check instance range. */ if ((Instance < 2) || (Instance > LogPortMax)) { *pLen = 0; return (SK_PNMI_ERR_UNKNOWN_INST); } - + if (pAC->Pnmi.DualNetActiveFlag == SK_TRUE) { PhysPortIndex = NetIndex; } @@ -8045,7 +8044,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ PhysPortIndex = 0; Limit = PhysPortMax; } - + pPrt = &pAC->GIni.GP[PhysPortIndex]; if (pPrt->PHWLinkUp) { Link = SK_TRUE; @@ -8053,7 +8052,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ else { Link = SK_FALSE; } - + /* * Check MAC type. */ @@ -8061,10 +8060,10 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ *pLen = 0; return (SK_PNMI_ERR_GENERAL); } - + /* Initialize backup data pointer. */ pVctBackupData = &pAC->Pnmi.VctBackup[PhysPortIndex]; - + /* * Check action type. */ @@ -8073,34 +8072,34 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ * Check length. */ switch (Id) { - + case OID_SKGE_VCT_GET: if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT)) { *pLen = (Limit - PhysPortIndex) * sizeof(SK_PNMI_VCT); return (SK_PNMI_ERR_TOO_SHORT); } break; - + case OID_SKGE_VCT_STATUS: if (*pLen < (Limit - PhysPortIndex) * sizeof(SK_U8)) { *pLen = (Limit - PhysPortIndex) * sizeof(SK_U8); return (SK_PNMI_ERR_TOO_SHORT); } break; - + default: *pLen = 0; return (SK_PNMI_ERR_GENERAL); - } - + } + /* * Get value. */ Offset = 0; for (; PhysPortIndex < Limit; PhysPortIndex++) { switch (Id) { - - case OID_SKGE_VCT_GET: + + case OID_SKGE_VCT_GET: if ((Link == SK_FALSE) && (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_PENDING)) { RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_FALSE); @@ -8108,7 +8107,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_PENDING; pAC->Pnmi.VctStatus[PhysPortIndex] |= (SK_PNMI_VCT_NEW_VCT_DATA | SK_PNMI_VCT_TEST_DONE); - + /* Copy results for later use to PNMI struct. */ for (i = 0; i < 4; i++) { if (pPrt->PMdiPairSts[i] == SK_PNMI_VCT_NORMAL_CABLE) { @@ -8135,7 +8134,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ ; /* VCT test is running. */ } } - + /* Get all results. */ CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex); Offset += sizeof(SK_U8); @@ -8149,16 +8148,16 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ *(pBuf + Offset) = pVctBackupData->PMdiPairSts[i]; Offset += sizeof(SK_U8); } - + RetCode = SK_PNMI_ERR_OK; break; - + case OID_SKGE_VCT_STATUS: CheckVctStatus(pAC, IoC, pBuf, Offset, PhysPortIndex); Offset += sizeof(SK_U8); RetCode = SK_PNMI_ERR_OK; break; - + default: *pLen = 0; return (SK_PNMI_ERR_GENERAL); @@ -8166,14 +8165,14 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ } /* for */ *pLen = Offset; return (RetCode); - + } /* if SK_PNMI_GET */ - + /* * From here SET or PRESET action. Check if the passed * buffer length is plausible. */ - + /* * Check length. */ @@ -8184,34 +8183,34 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ return (SK_PNMI_ERR_TOO_SHORT); } break; - + default: *pLen = 0; return (SK_PNMI_ERR_GENERAL); } - + /* * Perform preset or set. */ - + /* VCT does not support PRESET action. */ if (Action == SK_PNMI_PRESET) { return (SK_PNMI_ERR_OK); } - + Offset = 0; for (; PhysPortIndex < Limit; PhysPortIndex++) { switch (Id) { case OID_SKGE_VCT_SET: /* Start VCT test. */ if (Link == SK_FALSE) { SkGeStopPort(pAC, IoC, PhysPortIndex, SK_STOP_ALL, SK_SOFT_RST); - + RetCode = SkGmCableDiagStatus(pAC, IoC, PhysPortIndex, SK_TRUE); if (RetCode == 0) { /* RetCode: 0 => Start! */ pAC->Pnmi.VctStatus[PhysPortIndex] |= SK_PNMI_VCT_PENDING; pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_NEW_VCT_DATA; pAC->Pnmi.VctStatus[PhysPortIndex] &= ~SK_PNMI_VCT_LINK; - + /* * Start VCT timer counter. */ @@ -8235,7 +8234,7 @@ SK_U32 NetIndex) /* NetIndex (0..n), in single net mode always zero */ } Offset += sizeof(SK_U32); break; - + default: *pLen = 0; return (SK_PNMI_ERR_GENERAL); @@ -8258,14 +8257,14 @@ SK_U32 PhysPortIndex) SK_PNMI_VCT *pVctData; SK_U32 RetCode; SK_U8 LinkSpeedUsed; - + pPrt = &pAC->GIni.GP[PhysPortIndex]; - + pVctData = (SK_PNMI_VCT *) (pBuf + Offset); pVctData->VctStatus = SK_PNMI_VCT_NONE; - + if (!pPrt->PHWLinkUp) { - + /* Was a VCT test ever made before? */ if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) { if ((pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_LINK)) { @@ -8275,7 +8274,7 @@ SK_U32 PhysPortIndex) pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA; } } - + /* Check VCT test status. */ RetCode = SkGmCableDiagStatus(pAC,IoC, PhysPortIndex, SK_FALSE); if (RetCode == 2) { /* VCT test is running. */ @@ -8286,22 +8285,22 @@ SK_U32 PhysPortIndex) pVctData->VctStatus |= SK_PNMI_VCT_NEW_VCT_DATA; } } - + if (pPrt->PCableLen != 0xff) { /* Old DSP value. */ pVctData->VctStatus |= SK_PNMI_VCT_OLD_DSP_DATA; } } else { - + /* Was a VCT test ever made before? */ if (pAC->Pnmi.VctStatus[PhysPortIndex] & SK_PNMI_VCT_TEST_DONE) { pVctData->VctStatus &= ~SK_PNMI_VCT_NEW_VCT_DATA; pVctData->VctStatus |= SK_PNMI_VCT_OLD_VCT_DATA; } - + /* DSP only valid in 100/1000 modes. */ LinkSpeedUsed = pAC->GIni.GP[PhysPortIndex].PLinkSpeedUsed; - if (LinkSpeedUsed != SK_LSPEED_STAT_10MBPS) { + if (LinkSpeedUsed != SK_LSPEED_STAT_10MBPS) { pVctData->VctStatus |= SK_PNMI_VCT_NEW_DSP_DATA; } } diff --git a/drivers/sk98lin/skgesirq.c b/drivers/sk98lin/skgesirq.c index c7c04b70ec..e5a4f7ec10 100644 --- a/drivers/sk98lin/skgesirq.c +++ b/drivers/sk98lin/skgesirq.c @@ -30,39 +30,39 @@ * Fixed setting of PLinkSpeedUsed in SkHWLinkUp() when * auto-negotiation is disabled. * Editorial changes. - * + * * Revision 1.82 2003/01/29 13:34:33 rschmidt * Added some typecasts to avoid compiler warnings. - * + * * Revision 1.81 2002/12/05 10:49:51 rschmidt * Fixed missing Link Down Event for fiber (Bug Id #10768) * Added reading of cable length when link is up * Removed testing of unused error bits in PHY ISR * Editorial changes. - * + * * Revision 1.80 2002/11/12 17:15:21 rschmidt * Replaced SkPnmiGetVar() by ...MacStatistic() in SkMacParity(). * Editorial changes. - * + * * Revision 1.79 2002/10/14 15:14:51 rschmidt * Changed clearing of IS_M1_PAR_ERR (MAC 1 Parity Error) in * SkMacParity() depending on GIChipRev (HW-Bug #8). * Added error messages for GPHY Auto-Negotiation Error and * FIFO Overflow/Underrun in SkPhyIsrGmac(). * Editorial changes. - * + * * Revision 1.78 2002/10/10 15:54:29 mkarl * changes for PLinkSpeedUsed - * + * * Revision 1.77 2002/09/12 08:58:51 rwahl * Retrieve counters needed for XMAC errata workarounds directly because * PNMI returns corrected counter values (e.g. #10620). - * + * * Revision 1.76 2002/08/16 15:21:54 rschmidt * Replaced all if(GIChipId == CHIP_ID_GENESIS) with new entry GIGenesis. * Replaced wrong 1st para pAC with IoC in SK_IN/OUT macros. * Editorial changes. - * + * * Revision 1.75 2002/08/12 13:50:47 rschmidt * Changed clearing of IS_M1_PAR_ERR (MAC 1 Parity Error) in * SkMacParity() by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE (HW-Bug #8). @@ -70,26 +70,26 @@ * Corrected handling of Link Up and Auto-Negotiation Over for GPHY. * in SkGePortCheckUpGmac(). * Editorial changes. - * + * * Revision 1.74 2002/08/08 16:17:04 rschmidt * Added PhyType check for SK_HWEV_SET_ROLE event (copper only) * Changed Link Up check reading PHY Specific Status (YUKON) * Editorial changes - * + * * Revision 1.73 2002/07/15 18:36:53 rwahl * Editorial changes. - * + * * Revision 1.72 2002/07/15 15:46:26 rschmidt * Added new event: SK_HWEV_SET_SPEED * Editorial changes - * + * * Revision 1.71 2002/06/10 09:34:19 rschmidt * Editorial changes - * + * * Revision 1.70 2002/06/05 08:29:18 rschmidt * SkXmRxTxEnable() replaced by SkMacRxTxEnable(). * Editorial changes. - * + * * Revision 1.69 2002/04/25 13:03:49 rschmidt * Changes for handling YUKON. * Use of #ifdef OTHER_PHY to eliminate code for unused Phy types. @@ -105,119 +105,119 @@ * Removed status parameter from MAC IRQ handler SkMacIrq(). * Added SkGePortCheckUpGmac(), SkPhyIsrGmac() for GMAC. * Editorial changes - * + * * Revision 1.68 2002/02/26 15:24:53 rwahl * Fix: no link with manual configuration (#10673). The previous fix for * #10639 was removed. So for RLMT mode = CLS the RLMT may switch to * misconfigured port. It should not occur for the other RLMT modes. - * + * * Revision 1.67 2001/11/20 09:19:58 rwahl * Reworked bugfix #10639 (no dependency to RLMT mode). - * + * * Revision 1.66 2001/10/26 07:52:53 afischer * Port switching bug in `check local link` mode - * + * * Revision 1.65 2001/02/23 13:41:51 gklug * fix: PHYS2INST should be used correctly for Dual Net operation * chg: do no longer work with older PNMI - * + * * Revision 1.64 2001/02/15 11:27:04 rassmann * Working with RLMT v1 if SK_MAX_NETS undefined. - * + * * Revision 1.63 2001/02/06 10:44:23 mkunz * - NetIndex added to interface functions of pnmi V4 with dual net support - * + * * Revision 1.62 2001/01/31 15:31:41 gklug * fix: problem with autosensing an SR8800 switch - * + * * Revision 1.61 2000/11/09 11:30:09 rassmann * WA: Waiting after releasing reset until BCom chip is accessible. * * Revision 1.60 2000/10/18 12:37:48 cgoos * Reinserted the comment for version 1.56. - * + * * Revision 1.59 2000/10/18 12:22:20 cgoos * Added workaround for half duplex hangup. - * + * * Revision 1.58 2000/09/28 13:06:04 gklug * fix: BCom may NOT be touched if XMAC is in RESET state - * + * * Revision 1.57 2000/09/08 12:38:39 cgoos * Added forgotten variable declaration. - * + * * Revision 1.56 2000/09/08 08:12:13 cgoos * Changed handling of parity errors in SkGeHwErr (correct reset of error). * * Revision 1.55 2000/06/19 08:36:25 cgoos * Changed comment. - * + * * Revision 1.54 2000/05/22 08:45:57 malthoff * Fix: #10523 is valid for all BCom PHYs. - * + * * Revision 1.53 2000/05/19 10:20:30 cgoos * Removed Solaris debug output code. - * + * * Revision 1.52 2000/05/19 10:19:37 cgoos * Added PHY state check in HWLinkDown. * Move PHY interrupt code to IS_EXT_REG case in SkGeSirqIsr. - * + * * Revision 1.51 2000/05/18 05:56:20 cgoos * Fixed typo. - * + * * Revision 1.50 2000/05/17 12:49:49 malthoff * Fixes BCom link bugs (#10523). - * + * * Revision 1.49 1999/12/17 11:02:50 gklug * fix: read PHY_STAT of Broadcom chip more often to assure good status - * + * * Revision 1.48 1999/12/06 10:01:17 cgoos * Added SET function for Role. - * + * * Revision 1.47 1999/11/22 13:34:24 cgoos * Changed license header to GPL. - * + * * Revision 1.46 1999/09/16 10:30:07 cgoos * Removed debugging output statement from Linux. - * + * * Revision 1.45 1999/09/16 07:32:55 cgoos * Fixed dual-port copperfield bug (PHY_READ from resetted port). * Removed some unused variables. - * + * * Revision 1.44 1999/08/03 15:25:04 cgoos * Removed workaround for disabled interrupts in half duplex mode. - * + * * Revision 1.43 1999/08/03 14:27:58 cgoos * Removed SENSE mode code from SkGePortCheckUpBcom. - * + * * Revision 1.42 1999/07/26 09:16:54 cgoos * Added some typecasts to avoid compiler warnings. - * + * * Revision 1.41 1999/05/19 07:28:59 cgoos * Changes for 1000Base-T. - * + * * Revision 1.40 1999/04/08 13:59:39 gklug * fix: problem with 3Com switches endless RESTARTs - * + * * Revision 1.39 1999/03/08 10:10:52 gklug * fix: AutoSensing did switch to next mode even if LiPa indicated offline - * + * * Revision 1.38 1999/03/08 09:49:03 gklug * fix: Bug using pAC instead of IoC, causing AIX problems * fix: change compare for Linux compiler bug workaround - * + * * Revision 1.37 1999/01/28 14:51:33 gklug * fix: monitor for autosensing and extra RESETS the RX on wire counters - * + * * Revision 1.36 1999/01/22 09:19:55 gklug * fix: Init DupMode and InitPauseMd are now called in RxTxEnable - * + * * Revision 1.35 1998/12/11 15:22:59 gklug * chg: autosensing: check for receive if manual mode was guessed * chg: simplified workaround for XMAC errata * chg: wait additional 100 ms before link goes up. * chg: autoneg timeout to 600 ms * chg: restart autoneg even if configured to autonegotiation - * + * * Revision 1.34 1998/12/10 10:33:14 gklug * add: more debug messages * fix: do a new InitPhy if link went down (AutoSensing problem) @@ -225,114 +225,114 @@ * chg: reset Port if link goes down * chg: wait additional 100 ms when link comes up to check shorts * fix: dummy read extended autoneg status to prevent link going down immediately - * + * * Revision 1.33 1998/12/07 12:18:29 gklug * add: refinement of autosense mode: take into account the autoneg cap of LiPa - * + * * Revision 1.32 1998/12/07 07:11:21 gklug * fix: compiler warning - * + * * Revision 1.31 1998/12/02 09:29:05 gklug * fix: WA XMAC Errata: FCSCt check was not correct. * fix: WA XMAC Errata: Prec Counter were NOT updated in case of short checks. * fix: Clear Stat : now clears the Prev counters of all known Ports - * + * * Revision 1.30 1998/12/01 10:54:15 gklug * dd: workaround for XMAC errata changed. Check RX count and CRC err Count, too. - * + * * Revision 1.29 1998/12/01 10:01:53 gklug * fix: if MAC IRQ occurs during port down, this will be handled correctly - * + * * Revision 1.28 1998/11/26 16:22:11 gklug * fix: bug in autosense if manual modes are used - * + * * Revision 1.27 1998/11/26 15:50:06 gklug * fix: PNMI needs to set PLinkModeConf - * + * * Revision 1.26 1998/11/26 14:51:58 gklug * add: AutoSensing functionalty - * + * * Revision 1.25 1998/11/26 07:34:37 gklug * fix: Init PrevShorts when restarting port due to Link connection - * + * * Revision 1.24 1998/11/25 10:57:32 gklug * fix: remove unreferenced local vars - * + * * Revision 1.23 1998/11/25 08:26:40 gklug * fix: don't do a RESET on a starting or stopping port - * + * * Revision 1.22 1998/11/24 13:29:44 gklug * add: Workaround for MAC parity errata - * + * * Revision 1.21 1998/11/18 15:31:06 gklug * fix: lint bugs - * + * * Revision 1.20 1998/11/18 12:58:54 gklug * fix: use PNMI query instead of hardware access - * + * * Revision 1.19 1998/11/18 12:54:55 gklug * chg: add new workaround for XMAC Errata * add: short event counter monitoring on active link too - * + * * Revision 1.18 1998/11/13 14:27:41 malthoff * Bug Fix: Packet Arbiter Timeout was not cleared correctly * for timeout on TX1 and TX2. - * + * * Revision 1.17 1998/11/04 07:01:59 cgoos * Moved HW link poll sequence. * Added call to SkXmRxTxEnable. - * + * * Revision 1.16 1998/11/03 13:46:03 gklug * add: functionality of SET_LMODE and SET_FLOW_MODE * fix: send RLMT LinkDown event when Port stop is given with LinkUp - * + * * Revision 1.15 1998/11/03 12:56:47 gklug * fix: Needs more events - * + * * Revision 1.14 1998/10/30 07:36:35 gklug * rmv: unnecessary code - * + * * Revision 1.13 1998/10/29 15:21:57 gklug * add: Poll link feature for activating HW link * fix: Deactivate HWLink when Port STOP is given - * + * * Revision 1.12 1998/10/28 07:38:57 cgoos * Checking link status at begin of SkHWLinkUp. - * + * * Revision 1.11 1998/10/22 09:46:50 gklug * fix SysKonnectFileId typo - * + * * Revision 1.10 1998/10/14 13:57:47 gklug * add: Port start/stop event - * + * * Revision 1.9 1998/10/14 05:48:29 cgoos * Added definition for Para. - * + * * Revision 1.8 1998/10/14 05:40:09 gklug * add: Hardware Linkup signal used - * + * * Revision 1.7 1998/10/09 06:50:20 malthoff * Remove ID_sccs by SysKonnectFileId. * * Revision 1.6 1998/10/08 09:11:49 gklug * add: clear IRQ commands - * + * * Revision 1.5 1998/10/02 14:27:35 cgoos * Fixed some typos and wrong event names. - * + * * Revision 1.4 1998/10/02 06:24:17 gklug * add: HW error function * fix: OUT macros - * + * * Revision 1.3 1998/10/01 07:03:00 gklug * add: ISR for the usual interrupt source register - * + * * Revision 1.2 1998/09/03 13:50:33 gklug * add: function prototypes - * + * * Revision 1.1 1998/08/27 11:50:21 gklug * initial revision - * + * * * ******************************************************************************/ @@ -539,7 +539,7 @@ int Port) /* Port Index (MAC_1 + n) */ /* Disable Receiver and Transmitter */ SkMacRxTxDisable(pAC, IoC, Port); - + /* Init default sense mode */ SkHWInitDefSense(pAC, IoC, Port); @@ -680,13 +680,13 @@ int Port) /* Port Index of the port failed */ if (pAC->GIni.GIGenesis) { /* Snap statistic counters */ (void)SkXmUpdateStats(pAC, IoC, Port); - + (void)SkXmMacStatistic(pAC, IoC, Port, XM_TXF_MAX_SZ, &TxMax); } else { (void)SkGmMacStatistic(pAC, IoC, Port, GM_TXF_1518B, &TxMax); } - + if (TxMax > 0) { /* From now on check the parity */ pPrt->PCheckPar = SK_TRUE; @@ -721,7 +721,7 @@ SK_U32 HwStatus) /* Interrupt status word */ /* Reset all bits in the PCI STATUS register */ SK_IN16(IoC, PCI_C(PCI_STATUS), &Word); - + SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_ON); SK_OUT16(IoC, PCI_C(PCI_STATUS), Word | PCI_ERRBITS); SK_OUT8(IoC, B2_TST_CTRL1, TST_CFG_WRITE_OFF); @@ -736,19 +736,19 @@ SK_U32 HwStatus) /* Interrupt status word */ /* This situation is also indicated in the descriptor */ SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INSTAT); } - + if ((HwStatus & IS_NO_STAT_M2) != 0) { /* Ignore it */ /* This situation is also indicated in the descriptor */ SK_OUT16(IoC, MR_ADDR(MAC_2, RX_MFF_CTRL1), MFF_CLR_INSTAT); } - + if ((HwStatus & IS_NO_TIST_M1) != 0) { /* Ignore it */ /* This situation is also indicated in the descriptor */ SK_OUT16(IoC, MR_ADDR(MAC_1, RX_MFF_CTRL1), MFF_CLR_INTIST); } - + if ((HwStatus & IS_NO_TIST_M2) != 0) { /* Ignore it */ /* This situation is also indicated in the descriptor */ @@ -839,7 +839,7 @@ SK_U32 Istatus) /* Interrupt status word */ if ((Istatus & IS_HW_ERR) != 0) { /* read the HW Error Interrupt source */ SK_IN32(IoC, B0_HWE_ISRC, &RegVal32); - + SkGeHwErr(pAC, IoC, RegVal32); } @@ -876,7 +876,7 @@ SK_U32 Istatus) /* Interrupt status word */ } if ((Istatus & IS_PA_TO_TX1) != 0) { - + pPrt = &pAC->GIni.GP[0]; /* May be a normal situation in a server with a slow network */ @@ -901,9 +901,9 @@ SK_U32 Istatus) /* Interrupt status word */ SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets, &Len, (SK_U32) SK_PNMI_PORT_PHYS2INST(pAC, 0), pAC->Rlmt.Port[0].Net->NetNumber); - + pPrt->LastOctets = Octets; - + Para.Para32[0] = 0; SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME, SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para); @@ -911,7 +911,7 @@ SK_U32 Istatus) /* Interrupt status word */ } if ((Istatus & IS_PA_TO_TX2) != 0) { - + pPrt = &pAC->GIni.GP[1]; /* May be a normal situation in a server with a slow network */ @@ -927,9 +927,9 @@ SK_U32 Istatus) /* Interrupt status word */ SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets, &Len, (SK_U32) SK_PNMI_PORT_PHYS2INST(pAC, 1), pAC->Rlmt.Port[1].Net->NetNumber); - + pPrt->LastOctets = Octets; - + Para.Para32[0] = 1; SkTimerStart(pAC, IoC, &pPrt->HalfDupChkTimer, SK_HALFDUP_CHK_TIME, SKGE_HWAC, SK_HWEV_HALFDUP_CHK, Para); @@ -1007,18 +1007,18 @@ SK_U32 Istatus) /* Interrupt status word */ if ((Istatus & IS_EXT_REG) != 0) { /* Test IRQs from PHY */ for (i = 0; i < pAC->GIni.GIMacsFound; i++) { - + pPrt = &pAC->GIni.GP[i]; - + if (pPrt->PState == SK_PRT_RESET) { continue; } - + switch (pPrt->PhyType) { - + case SK_PHY_XMAC: break; - + case SK_PHY_BCOM: SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_STAT, &PhyInt); SkXmPhyRead(pAC, IoC, i, PHY_BCOM_INT_MASK, &PhyIMsk); @@ -1030,7 +1030,7 @@ SK_U32 Istatus) /* Interrupt status word */ SkPhyIsrBcom(pAC, IoC, i, PhyInt); } break; - + case SK_PHY_MARV_COPPER: case SK_PHY_MARV_FIBER: SkGmPhyRead(pAC, IoC, i, PHY_MARV_INT_STAT, &PhyInt); @@ -1048,7 +1048,7 @@ SK_U32 Istatus) /* Interrupt status word */ case SK_PHY_LONE: SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_STAT, &PhyInt); SkXmPhyRead(pAC, IoC, i, PHY_LONE_INT_ENAB, &PhyIMsk); - + if ((PhyInt & PhyIMsk) != 0) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Port %d Lone Int: %x Mask: %x\n", @@ -1162,7 +1162,7 @@ int Port) /* Which port should be checked */ CheckShorts = 2; (void)SkXmMacStatistic(pAC, IoC, Port, XM_RXF_FCS_ERR, &FcsErrCts); - + if (pPrt->PLinkModeConf == SK_LMODE_AUTOSENSE && pPrt->PLipaAutoNeg == SK_LIPA_UNKNOWN && (pPrt->PLinkMode == SK_LMODE_HALF || @@ -1175,7 +1175,7 @@ int Port) /* Which port should be checked */ /* Nothing received, restart link */ pPrt->PPrevFcs = FcsErrCts; pPrt->PPrevShorts = Shorts; - + return(SK_HW_PS_RESTART); } else { @@ -1307,7 +1307,7 @@ int Port) /* Which port should be checked */ XM_IN16(IoC, Port, XM_ISRC, &Isrc); IsrcSum |= Isrc; SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum); - + if ((Isrc & XM_IS_INP_ASS) == 0) { /* It has been in sync since last time */ /* Restart the PORT */ @@ -1333,7 +1333,7 @@ int Port) /* Which port should be checked */ * check whether the link is now o.k. */ pPrt->PLinkResCt++; - + pPrt->PAutoNegTimeOut = 0; if (pPrt->PLinkResCt < SK_MAX_LRESTART) { @@ -1341,13 +1341,13 @@ int Port) /* Which port should be checked */ } pPrt->PLinkResCt = 0; - + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Do NOT restart on Port %d %x %x\n", Port, Isrc, IsrcSum)); } else { pPrt->PIsave = (SK_U16)(IsrcSum & XM_IS_AND); - + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Save Sync/nosync Port %d %x %x\n", Port, Isrc, IsrcSum)); @@ -1402,7 +1402,7 @@ int Port) /* Which port should be checked */ IsrcSum |= Isrc; SkXmAutoNegLipaXmac(pAC, IoC, Port, IsrcSum); - + if ((GpReg & XM_GP_INP_ASS) != 0 || (IsrcSum & XM_IS_INP_ASS) != 0) { if ((GpReg & XM_GP_INP_ASS) == 0) { /* Save Auto-negotiation Done interrupt only if link is in sync */ @@ -1428,7 +1428,7 @@ int Port) /* Which port should be checked */ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("AutoNeg FAIL Port %d (LpAb %x, ResAb %x)\n", Port, LpAb, ResAb)); - + /* Try next possible mode */ NextMode = SkHWSenseGetNext(pAC, IoC, Port); SkHWLinkDown(pAC, IoC, Port); @@ -1448,7 +1448,7 @@ int Port) /* Which port should be checked */ ("AutoNeg done Port %d\n", Port)); return(SK_HW_PS_LINK); } - + /* AutoNeg not done, but HW link is up. Check for timeouts */ pPrt->PAutoNegTimeOut++; if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) { @@ -1499,7 +1499,7 @@ int Port) /* Which port should be checked */ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Link sync(GP), Port %d\n", Port)); SkHWLinkUp(pAC, IoC, Port); - + /* * Link sync (GP) and so assume a good connection. But if not received * a bunch of frames received in a time slot (maybe broken tx cable) @@ -1722,7 +1722,7 @@ int Port) /* Which port should be checked */ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_STAT, &PhyStat); SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); - + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("AutoNeg: %d, PhyStat: 0x%04x\n", AutoNeg, PhyStat)); @@ -1734,17 +1734,17 @@ int Port) /* Which port should be checked */ ("Master/Slave Fault port %d\n", Port)); pPrt->PAutoNegFail = SK_TRUE; pPrt->PMSStatus = SK_MS_STAT_FAULT; - + return(SK_HW_PS_RESTART); } if ((PhyStat & PHY_ST_LSYNC) == 0) { return(SK_HW_PS_NONE); } - + pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; - + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("AutoNeg: %d, PhyStat: 0x%04x\n", AutoNeg, PhyStat)); @@ -1777,7 +1777,7 @@ int Port) /* Which port should be checked */ (void *)NULL); } #endif /* DEBUG */ - + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("AutoNeg done Port %d\n", Port)); return(SK_HW_PS_LINK); @@ -1806,7 +1806,7 @@ int Port) /* Which port should be checked */ (void *)NULL); } #endif /* DEBUG */ - + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Link sync(GP), Port %d\n", Port)); SkHWLinkUp(pAC, IoC, Port); @@ -1871,7 +1871,7 @@ int Port) /* Which port should be checked */ ("AutoNeg: %d, PhyStat: 0x%04x\n", AutoNeg, PhyStat)); SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); - + SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb); if ((ResAb & PHY_B_1000S_MSF) != 0) { @@ -1880,37 +1880,37 @@ int Port) /* Which port should be checked */ ("Master/Slave Fault port %d\n", Port)); pPrt->PAutoNegFail = SK_TRUE; pPrt->PMSStatus = SK_MS_STAT_FAULT; - + return(SK_HW_PS_RESTART); } /* Read PHY Specific Status */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat); - + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("AutoNeg: %d, PhySpecStat: 0x%04x\n", AutoNeg, PhySpecStat)); if ((PhySpecStat & PHY_M_PS_LINK_UP) == 0) { return(SK_HW_PS_NONE); } - + pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; - + pPrt->PCableLen = (SK_U8)((PhySpecStat & PHY_M_PS_CABLE_MSK) >> 7); - + if (AutoNeg) { /* Auto-Negotiation Over ? */ if ((PhyStat & PHY_ST_AN_OVER) != 0) { - + SkHWLinkUp(pAC, IoC, Port); - + Done = SkMacAutoNegDone(pAC, IoC, Port); - + if (Done != SK_AND_OK) { return(SK_HW_PS_RESTART); } - + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("AutoNeg done Port %d\n", Port)); return(SK_HW_PS_LINK); @@ -1928,7 +1928,7 @@ int Port) /* Which port should be checked */ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Link sync, Port %d\n", Port)); SkHWLinkUp(pAC, IoC, Port); - + return(SK_HW_PS_LINK); } @@ -1986,7 +1986,7 @@ int Port) /* Which port should be checked */ StatSum |= PhyStat; SkMacAutoNegLipaPhy(pAC, IoC, Port, PhyStat); - + if ((PhyStat & PHY_ST_LSYNC) == 0) { /* Save Auto-negotiation Done bit */ pPrt->PIsave = (SK_U16)(StatSum & PHY_ST_AN_OVER); @@ -2010,7 +2010,7 @@ int Port) /* Which port should be checked */ SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("AutoNeg FAIL Port %d (LpAb %x, 1000TStat %x)\n", Port, LpAb, ExtStat)); - + /* Try next possible mode */ NextMode = SkHWSenseGetNext(pAC, IoC, Port); SkHWLinkDown(pAC, IoC, Port); @@ -2033,7 +2033,7 @@ int Port) /* Which port should be checked */ return(SK_HW_PS_LINK); } } - + /* AutoNeg not done, but HW link is up. Check for timeouts */ pPrt->PAutoNegTimeOut++; if (pPrt->PAutoNegTimeOut >= SK_AND_MAX_TO) { @@ -2066,7 +2066,7 @@ int Port) /* Which port should be checked */ * extra link down/ups */ SkXmPhyRead(pAC, IoC, Port, PHY_LONE_INT_STAT, &ExtStat); - + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("Link sync(GP), Port %d\n", Port)); SkHWLinkUp(pAC, IoC, Port); @@ -2152,7 +2152,7 @@ SK_EVPARA Para) /* Event specific Parameter */ break; } - + /* Start again the check Timer */ if (pPrt->PHWLinkUp) { Time = SK_WA_ACT_TIME; @@ -2277,19 +2277,19 @@ SK_EVPARA Para) /* Event specific Parameter */ pPrt->HalfDupTimerActive = SK_FALSE; if (pPrt->PLinkModeStatus == SK_LMODE_STAT_HALF || pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOHALF) { - + Len = sizeof(SK_U64); SkPnmiGetVar(pAC, IoC, OID_SKGE_STAT_TX_OCTETS, (char *)&Octets, &Len, (SK_U32)SK_PNMI_PORT_PHYS2INST(pAC, Port), pAC->Rlmt.Port[Port].Net->NetNumber); - + if (pPrt->LastOctets == Octets) { /* Tx hanging, a FIFO flush restarts it */ SkMacFlushTxFifo(pAC, IoC, Port); } } break; - + default: SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_SIRQ_E001, SKERR_SIRQ_E001MSG); break; @@ -2323,7 +2323,7 @@ SK_U16 IStatus) /* Interrupt Status */ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_SIRQ_E022, SKERR_SIRQ_E022MSG); } - + if ((IStatus & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) != 0) { Para.Para32[0] = (SK_U32)Port; @@ -2367,16 +2367,16 @@ SK_U16 IStatus) /* Interrupt Status */ /* Signal to RLMT */ SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_LINK_DOWN, Para); } - + if ((IStatus & PHY_M_IS_AN_ERROR) != 0) { /* Auto-Negotiation Error */ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E023, SKERR_SIRQ_E023MSG); } - + if ((IStatus & PHY_M_IS_LSP_CHANGE) != 0) { /* TBD */ } - + if ((IStatus & PHY_M_IS_FIFO_ERROR) != 0) { /* FIFO Overflow/Underrun Error */ SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_SIRQ_E024, SKERR_SIRQ_E024MSG); diff --git a/drivers/sk98lin/ski2c.c b/drivers/sk98lin/ski2c.c index b262f29a8d..2ab635a229 100644 --- a/drivers/sk98lin/ski2c.c +++ b/drivers/sk98lin/ski2c.c @@ -29,178 +29,178 @@ * Revision 1.57 2003/01/28 09:17:38 rschmidt * Fixed handling for sensors on YUKON Fiber. * Editorial changes. - * + * * Revision 1.56 2002/12/19 14:20:41 rschmidt * Added debugging code in SkI2cWait(). * Replaced all I2C-write operations with function SkI2cWrite(). * Fixed compiler warning because of uninitialized 'Time' in SkI2cEvent(). * Editorial changes. - * + * * Revision 1.55 2002/10/15 07:23:55 rschmidt * Added setting of the GIYukon32Bit bool variable to distinguish * 32-bit adapters. * Editorial changes (TWSI). - * + * * Revision 1.54 2002/08/13 09:05:06 rschmidt * Added new thresholds if VAUX is not available (GIVauxAvail). * Merged defines for PHY PLL 3V3 voltage (A and B). * Editorial changes. - * + * * Revision 1.53 2002/08/08 11:04:53 rwahl * Added missing comment for revision 1.51 - * + * * Revision 1.52 2002/08/08 10:09:02 jschmalz * Sensor init state caused wrong error log entry - * + * * Revision 1.51 2002/08/06 09:43:03 jschmalz * Extensions and changes for Yukon - * + * * Revision 1.50 2002/08/02 12:09:22 rschmidt * Added support for YUKON sensors. * Editorial changes. - * + * * Revision 1.49 2002/07/30 11:07:52 rschmidt * Replaced MaxSens init by update for Copper in SkI2cInit1(), * because it was already initialized in SkI2cInit0(). * Editorial changes. - * + * * Revision 1.48 2001/08/16 12:44:33 afischer * LM80 sensor init values corrected - * + * * Revision 1.47 2001/04/05 11:38:09 rassmann * Set SenState to idle in SkI2cWaitIrq(). * Changed error message in SkI2cWaitIrq(). - * + * * Revision 1.46 2001/04/02 14:03:35 rassmann * Changed pAC to IoC in SK_IN32(). - * + * * Revision 1.45 2001/03/21 12:12:49 rassmann * Resetting I2C_READY interrupt in SkI2cInit1(). - * + * * Revision 1.44 2000/08/07 15:49:03 gklug * Fix: SK_INFAST only in NetWare driver. - * + * * Revision 1.43 2000/08/03 14:28:17 rassmann * Added function to wait for I2C being ready before resetting the board. * Replaced one duplicate "out of range" message with correct one. - * + * * Revision 1.42 1999/11/22 13:35:12 cgoos * Changed license header to GPL. - * + * * Revision 1.41 1999/09/14 14:11:30 malthoff * The 1000BT Dual Link adapter has got only one Fan. * The second Fan has been removed. - * + * * Revision 1.40 1999/05/27 13:37:27 malthoff * Set divisor of 1 for fan count calculation. - * + * * Revision 1.39 1999/05/20 14:54:43 malthoff * I2c.DummyReads is not used in Diagnostics. - * + * * Revision 1.38 1999/05/20 09:20:56 cgoos * Changes for 1000Base-T (up to 9 sensors and fans). - * + * * Revision 1.37 1999/03/25 15:11:36 gklug * fix: reset error flag if sensor reads correct value - * + * * Revision 1.36 1999/01/07 14:11:16 gklug * fix: break added - * + * * Revision 1.35 1999/01/05 15:31:49 gklug * fix: CLEAR STAT command is now added correctly - * + * * Revision 1.34 1998/12/01 13:45:16 gklug * fix: introduced Init level, because we don't need reinits - * + * * Revision 1.33 1998/11/09 14:54:25 malthoff * Modify I2C Transfer Timeout handling for Diagnostics. - * + * * Revision 1.32 1998/11/03 06:54:35 gklug * fix: Need dummy reads at the beginning to init sensors * * Revision 1.31 1998/11/03 06:42:42 gklug * fix: select correctVIO range only if between warning levels - * + * * Revision 1.30 1998/11/02 07:36:53 gklug * fix: Error should not include WARNING message - * + * * Revision 1.29 1998/10/30 15:07:43 malthoff * Disable 'I2C does not compelete' error log for diagnostics. - * + * * Revision 1.28 1998/10/22 09:48:11 gklug * fix: SysKonnectFileId typo - * + * * Revision 1.27 1998/10/20 09:59:46 gklug * add: parameter to SkOsGetTime - * + * * Revision 1.26 1998/10/09 06:10:59 malthoff * Remove ID_sccs by SysKonnectFileId. - * + * * Revision 1.25 1998/09/08 12:40:26 gklug * fix: syntax error in if clause - * + * * Revision 1.24 1998/09/08 12:19:42 gklug * chg: INIT Level checking - * + * * Revision 1.23 1998/09/08 07:37:20 gklug * fix: log error if PCI_IO voltage sensor could not be initialized - * + * * Revision 1.22 1998/09/04 08:30:03 malthoff * Bugfixes during SK_DIAG testing: * - correct NS2BCLK() macro * - correct SkI2cSndDev() * - correct SkI2cWait() loop waiting for an event - * + * * Revision 1.21 1998/08/27 14:46:01 gklug * chg: if-then-else replaced by switch * * Revision 1.20 1998/08/27 14:40:07 gklug * test: integral types - * + * * Revision 1.19 1998/08/25 07:51:54 gklug * fix: typos for compiling - * + * * Revision 1.18 1998/08/25 06:12:24 gklug * add: count errors and warnings * fix: check not the sensor state but the ErrFlag! - * + * * Revision 1.17 1998/08/25 05:56:48 gklug * add: CheckSensor function - * + * * Revision 1.16 1998/08/20 11:41:10 gklug * chg: omit STRCPY macro by using char * as Sensor Description - * + * * Revision 1.15 1998/08/20 11:37:35 gklug * chg: change Ioc to IoC - * + * * Revision 1.14 1998/08/20 11:32:52 gklug * fix: Para compile error - * + * * Revision 1.13 1998/08/20 11:27:41 gklug * fix: Compile bugs with new awrning constants - * + * * Revision 1.12 1998/08/20 08:53:05 gklug * fix: compiler errors * add: Threshold values - * + * * Revision 1.11 1998/08/19 12:39:22 malthoff * Compiler Fix: Some names have changed. - * + * * Revision 1.10 1998/08/19 12:20:56 gklug * fix: remove struct from C files (see CCC) - * + * * Revision 1.9 1998/08/19 06:28:46 malthoff * SkOsGetTime returns SK_U64 now. - * + * * Revision 1.8 1998/08/17 13:53:33 gklug * fix: Parameter of event function and its result - * + * * Revision 1.7 1998/08/17 07:02:15 malthoff * Modify the functions for accessing the I2C SW Registers. * Modify SkI2cWait(). * Put Lm80RcvReg into sklm80.c * Remove Compiler Errors. - * + * * Revision 1.6 1998/08/14 07:13:20 malthoff * remove pAc with pAC * remove smc with pAC @@ -473,7 +473,7 @@ SK_IOC IoC) /* I/O Context */ SkDgWaitTime(IoC, NS2BCLK(T_CLK_HIGH)); SK_I2C_GET_SW(IoC, &I2cSwCtrl); - + Bit = (I2cSwCtrl & I2C_DATA) ? 1 : 0; I2C_CLK_LOW(IoC); @@ -615,19 +615,19 @@ int Event) /* complete event to wait for (I2C_READ or I2C_WRITE) */ SK_U32 I2cCtrl; StartTime = SkOsGetTime(pAC); - + do { CurrentTime = SkOsGetTime(pAC); if (CurrentTime - StartTime > SK_TICKS_PER_SEC / 8) { - + SK_I2C_STOP(IoC); #ifndef SK_DIAG SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E002, SKERR_I2C_E002MSG); #endif /* !SK_DIAG */ return(1); } - + SK_I2C_GET_CTL(IoC, &I2cCtrl); #ifdef xYUKON_DBG @@ -637,7 +637,7 @@ int Event) /* complete event to wait for (I2C_READ or I2C_WRITE) */ return(1); } #endif /* YUKON_DBG */ - + } while ((I2cCtrl & I2C_FLAG) == (SK_U32)Event << 31); return(0); @@ -696,7 +696,7 @@ int I2cBurst) /* I2C Burst Flag */ { SK_OUT32(IoC, B2_I2C_DATA, I2cData); SK_I2C_CTL(IoC, I2C_WRITE, I2cDev, I2cReg, I2cBurst); - + return(SkI2cWait(pAC, IoC, I2C_WRITE)); } /* SkI2cWrite*/ @@ -719,11 +719,11 @@ int I2cBurst) /* I2C Burst Flag */ SK_OUT32(IoC, B2_I2C_DATA, 0); SK_I2C_CTL(IoC, I2C_READ, I2cDev, I2cReg, I2cBurst); - + if (SkI2cWait(pAC, IoC, I2C_READ) != 0) { w_print("%s\n", SKERR_I2C_E002MSG); } - + SK_IN32(IoC, B2_I2C_DATA, &Data); return(Data); } /* SkI2cRead */ @@ -747,10 +747,10 @@ SK_IOC IoC, /* I/O Context */ SK_SENSOR *pSen) /* Sensor to be read */ { if (pSen->SenRead != NULL) { - return((*pSen->SenRead)(pAC, IoC, pSen)); + return((*pSen->SenRead)(pAC, IoC, pSen)); } else - return(0); /* no success */ + return(0); /* no success */ } /* SkI2cReadSensor*/ /* @@ -763,10 +763,10 @@ SK_AC *pAC) /* Adapter Context */ /* Begin with first sensor */ pAC->I2c.CurrSens = 0; - + /* Begin with timeout control for state machine */ pAC->I2c.TimerMode = SK_TIMER_WATCH_STATEMACHINE; - + /* Set sensor number to zero */ pAC->I2c.MaxSens = 0; @@ -840,32 +840,32 @@ SK_IOC IoC) /* I/O Context */ if ((I2cSwCtrl & I2C_DATA) == 0) { /* this is a 32-Bit board */ pAC->GIni.GIYukon32Bit = SK_TRUE; - return(0); + return(0); } /* Check for 64 Bit Yukon without sensors */ if (SkI2cWrite(pAC, IoC, 0, LM80_ADDR, LM80_CFG, 0) != 0) { - return(0); + return(0); } (void)SkI2cWrite(pAC, IoC, 0xff, LM80_ADDR, LM80_IMSK_1, 0); - + (void)SkI2cWrite(pAC, IoC, 0xff, LM80_ADDR, LM80_IMSK_2, 0); - + (void)SkI2cWrite(pAC, IoC, 0, LM80_ADDR, LM80_FAN_CTRL, 0); - + (void)SkI2cWrite(pAC, IoC, 0, LM80_ADDR, LM80_TEMP_CTRL, 0); - + (void)SkI2cWrite(pAC, IoC, LM80_CFG_START, LM80_ADDR, LM80_CFG, 0); - + /* * MaxSens has to be updated here, because PhyType is not * set when performing Init Level 0 */ pAC->I2c.MaxSens = 5; - + pPrt = &pAC->GIni.GP[0]; - + if (pAC->GIni.GIGenesis) { if (pPrt->PhyType == SK_PHY_BCOM) { if (pAC->GIni.GIMacsFound == 1) { @@ -879,7 +879,7 @@ SK_IOC IoC) /* I/O Context */ else { pAC->I2c.MaxSens += 3; } - + for (i = 0; i < pAC->I2c.MaxSens; i++) { switch (i) { case 0: @@ -1022,10 +1022,10 @@ SK_IOC IoC) /* I/O Context */ #ifndef SK_DIAG pAC->I2c.DummyReads = pAC->I2c.MaxSens; #endif /* !SK_DIAG */ - + /* Clear I2C IRQ */ SK_OUT32(IoC, B2_I2C_IRQ, I2C_CLR_IRQ); - + /* Now we are I/O initialized */ pAC->I2c.InitLevel = SK_INIT_IO; return(0); @@ -1156,7 +1156,7 @@ SK_SENSOR *pSen) /* Check the Value against the thresholds. First: Error Thresholds */ TooHigh = (pSen->SenValue > pSen->SenThreErrHigh); TooLow = (pSen->SenValue < pSen->SenThreErrLow); - + IsError = SK_FALSE; if (TooHigh || TooLow) { /* Error condition is satisfied */ @@ -1229,7 +1229,7 @@ SK_SENSOR *pSen) /* 2nd: Warning thresholds */ TooHigh = (pSen->SenValue > pSen->SenThreWarnHigh); TooLow = (pSen->SenValue < pSen->SenThreWarnLow); - + if (!IsError && (TooHigh || TooLow)) { /* Error condition is satisfied */ DoTrapSend = SK_TRUE; @@ -1307,7 +1307,7 @@ SK_SENSOR *pSen) */ if (pSen->SenInit == SK_SEN_DYN_INIT_PCI_IO) { - pSen->SenInit = SK_SEN_DYN_INIT_NONE; + pSen->SenInit = SK_SEN_DYN_INIT_NONE; if (pSen->SenValue > SK_SEN_PCI_IO_RANGE_LIMITER) { /* 5V PCI-IO Voltage */ @@ -1320,12 +1320,12 @@ SK_SENSOR *pSen) pSen->SenThreErrHigh = SK_SEN_PCI_IO_3V3_HIGH_ERR; } } - + #if 0 /* Dynamic thresholds also for VAUX of LM80 sensor */ if (pSen->SenInit == SK_SEN_DYN_INIT_VAUX) { - pSen->SenInit = SK_SEN_DYN_INIT_NONE; + pSen->SenInit = SK_SEN_DYN_INIT_NONE; /* 3.3V VAUX Voltage */ if (pSen->SenValue > SK_SEN_VAUX_RANGE_LIMITER) { @@ -1410,17 +1410,17 @@ SK_EVPARA Para) /* Event specific Parameter */ ParaLocal.Para64 = (SK_U64)0; pAC->I2c.TimerMode = SK_TIMER_NEW_GAUGING; - + SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, Time, SKGE_I2C, SK_I2CEV_TIM, ParaLocal); } - else { + else { /* Start Timer */ ParaLocal.Para64 = (SK_U64)0; pAC->I2c.TimerMode = SK_TIMER_WATCH_STATEMACHINE; - SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, SK_I2C_TIM_WATCH, + SkTimerStart(pAC, IoC, &pAC->I2c.SenTimer, SK_I2C_TIM_WATCH, SKGE_I2C, SK_I2CEV_TIM, ParaLocal); } break; diff --git a/drivers/sk98lin/sklm80.c b/drivers/sk98lin/sklm80.c index 1c96ee3a36..687572b1d2 100644 --- a/drivers/sk98lin/sklm80.c +++ b/drivers/sk98lin/sklm80.c @@ -29,50 +29,50 @@ * Revision 1.20 2002/08/13 09:16:27 rschmidt * Changed return value for SkLm80ReadSensor() back to 'int' * Editorial changes - * + * * Revision 1.19 2002/08/06 09:43:31 jschmalz * Extensions and changes for Yukon - * + * * Revision 1.18 2002/08/02 12:26:57 rschmidt * Editorial changes - * + * * Revision 1.17 1999/11/22 13:35:51 cgoos * Changed license header to GPL. - * + * * Revision 1.16 1999/05/27 14:05:47 malthoff * Fans: Set SenVal to 0 if the fan value is 0 or 0xff. Both values * are outside the limits (0: div zero error, 0xff: value not in * range, assume 0). - * + * * Revision 1.15 1999/05/27 13:38:51 malthoff * Pervent from Division by zero errors. - * + * * Revision 1.14 1999/05/20 09:20:01 cgoos * Changes for 1000Base-T (Fan sensors). - * + * * Revision 1.13 1998/10/22 09:48:14 gklug * fix: SysKonnectFileId typo - * + * * Revision 1.12 1998/10/09 06:12:06 malthoff * Remove ID_sccs by SysKonnectFileId. - * + * * Revision 1.11 1998/09/04 08:33:48 malthoff * bug fix: SenState = SK_SEN_IDLE when * leaving SK_SEN_VALEXT state - * + * * Revision 1.10 1998/08/20 12:02:10 gklug * fix: compiler warnings type mismatch * * Revision 1.9 1998/08/20 11:37:38 gklug * chg: change Ioc to IoC - * + * * Revision 1.8 1998/08/19 12:20:58 gklug * fix: remove struct from C files (see CCC) - * + * * Revision 1.7 1998/08/17 07:04:57 malthoff * Take SkLm80RcvReg() function from ski2c.c. * Add IoC parameter to BREAK_OR_WAIT() macro. - * + * * Revision 1.6 1998/08/14 07:11:28 malthoff * remove pAc with pAC. * @@ -158,9 +158,9 @@ int Reg) /* register to read */ } Val = Val * SK_LM80_TEMP_LSB; SkI2cStop(IoC); - + TempExt = (int)SkLm80RcvReg(IoC, LM80_ADDR, LM80_TEMP_CTRL); - + if (Val > 0) { Val += ((TempExt >> 7) * SK_LM80_TEMPEXT_LSB); } @@ -175,7 +175,7 @@ int Reg) /* register to read */ case LM80_VT3_IN: Val = (int)SkI2cRcvByte(IoC, 1) * SK_LM80_VT_LSB; break; - + default: Val = (int)SkI2cRcvByte(IoC, 1); break; @@ -210,11 +210,11 @@ SK_SENSOR *pSen) /* Sensor to be read */ pSen->SenState = SK_SEN_VALUE ; BREAK_OR_WAIT(pAC, IoC, I2C_READ); - + case SK_SEN_VALUE: /* Read value from data register */ SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value)); - + Value &= 0xff; /* only least significant byte is valid */ /* Do NOT check the Value against the thresholds */ @@ -258,7 +258,7 @@ SK_SENSOR *pSen) /* Sensor to be read */ pSen->SenState = SK_SEN_VALEXT ; BREAK_OR_WAIT(pAC, IoC, I2C_READ); - + case SK_SEN_VALEXT: /* Read value from data register */ SK_IN32(IoC, B2_I2C_DATA, ((SK_U32 *)&Value)); @@ -279,7 +279,7 @@ SK_SENSOR *pSen) /* Sensor to be read */ pSen->SenState = SK_SEN_IDLE ; return(1); - + default: SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_I2C_E007, SKERR_I2C_E007MSG); return(1); diff --git a/drivers/sk98lin/skproc.c b/drivers/sk98lin/skproc.c index ecba704816..4e340730e5 100644 --- a/drivers/sk98lin/skproc.c +++ b/drivers/sk98lin/skproc.c @@ -7,7 +7,7 @@ * Purpose: Funktions to display statictic data * ******************************************************************************/ - + /****************************************************************************** * * (C)Copyright 1998-2003 SysKonnect GmbH. @@ -30,43 +30,43 @@ * $Log: skproc.c,v $ * Revision 1.4 2003/02/25 14:16:37 mlindner * Fix: Copyright statement - * + * * Revision 1.3 2002/10/02 12:59:51 mlindner * Add: Support for Yukon * Add: Speed check and setup * Add: Merge source for kernel 2.2.x and 2.4.x * Add: Read sensor names directly from VPD * Fix: Volt values - * + * * Revision 1.2.2.7 2002/01/14 12:45:15 mlindner * Fix: Editorial changes - * + * * Revision 1.2.2.6 2001/12/06 15:26:07 mlindner * Fix: Return value of proc_read - * + * * Revision 1.2.2.5 2001/12/06 09:57:39 mlindner * New ProcFs entries - * + * * Revision 1.2.2.4 2001/09/05 12:16:02 mlindner * Add: New ProcFs entries * Fix: Counter Errors (Jumbo == to long errors) * Fix: Kernel error compilation * Fix: too short counters - * + * * Revision 1.2.2.3 2001/06/25 07:26:26 mlindner * Add: More error messages - * + * * Revision 1.2.2.2 2001/03/15 12:50:13 mlindner * fix: ProcFS owner protection - * + * * Revision 1.2.2.1 2001/03/12 16:43:48 mlindner * chg: 2.4 requirements for procfs - * + * * Revision 1.1 2001/01/22 14:15:31 mlindner * added ProcFs functionality * Dual Net functionality integrated * Rlmt networks added - * + * * ******************************************************************************/ @@ -100,15 +100,15 @@ extern char * SkNumber( /***************************************************************************** * - * proc_read - print "summaries" entry + * proc_read - print "summaries" entry * * Description: - * This function fills the proc entry with statistic data about + * This function fills the proc entry with statistic data about * the ethernet device. - * + * * * Returns: buffer with statistic data - * + * */ int proc_read(char *buffer, char **buffer_location, @@ -124,7 +124,7 @@ void *data) SK_AC *pAC; char test_buf[100]; char sens_msg[50]; - unsigned long Flags; + unsigned long Flags; unsigned int Size; struct SK_NET_DEVICE *next; struct SK_NET_DEVICE *SkgeProcDev = SkGeRootDev; @@ -146,20 +146,20 @@ void *data) spin_lock_irqsave(&pAC->SlowPathLock, Flags); Size = SK_PNMI_STRUCT_SIZE; - SkPnmiGetStruct(pAC, pAC->IoBase, + SkPnmiGetStruct(pAC, pAC->IoBase, pPnmiStruct, &Size, t-1); spin_unlock_irqrestore(&pAC->SlowPathLock, Flags); - + if (strcmp(pAC->dev[t-1]->name, file->name) == 0) { pPnmiStat = &pPnmiStruct->Stat[0]; - len = sprintf(buffer, + len = sprintf(buffer, "\nDetailed statistic for device %s\n", pAC->dev[t-1]->name); len += sprintf(buffer + len, "=======================================\n"); - + /* Board statistics */ - len += sprintf(buffer + len, + len += sprintf(buffer + len, "\nBoard statistics\n\n"); len += sprintf(buffer + len, "Active Port %c\n", @@ -226,9 +226,9 @@ void *data) break; } } - + /*Receive statistics */ - len += sprintf(buffer + len, + len += sprintf(buffer + len, "\nReceive statistics\n\n"); len += sprintf(buffer + len, @@ -240,14 +240,14 @@ void *data) SkNumber(test_buf, pPnmiStat->StatRxOkCts, 10,0,-1,0)); #if 0 - if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC && + if (pAC->GIni.GP[0].PhyType == SK_PHY_XMAC && pAC->HWRevision < 12) { - pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts - + pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts - pPnmiStat->StatRxShortsCts; pPnmiStat->StatRxShortsCts = 0; } #endif - if (pNet->Mtu > 1500) + if (pNet->Mtu > 1500) pPnmiStruct->InErrorsCts = pPnmiStruct->InErrorsCts - pPnmiStat->StatRxTooLongCts; @@ -292,37 +292,37 @@ void *data) len += sprintf(buffer + len, " too long %s\n", SkNumber(test_buf, pPnmiStat->StatRxTooLongCts, - 10, 0, -1, 0)); + 10, 0, -1, 0)); len += sprintf(buffer + len, " carrier extension %s\n", SkNumber(test_buf, pPnmiStat->StatRxCextCts, - 10, 0, -1, 0)); + 10, 0, -1, 0)); len += sprintf(buffer + len, " too short %s\n", SkNumber(test_buf, pPnmiStat->StatRxShortsCts, - 10, 0, -1, 0)); + 10, 0, -1, 0)); len += sprintf(buffer + len, " symbol %s\n", SkNumber(test_buf, pPnmiStat->StatRxSymbolCts, - 10, 0, -1, 0)); + 10, 0, -1, 0)); len += sprintf(buffer + len, " LLC MAC size %s\n", SkNumber(test_buf, pPnmiStat->StatRxIRLengthCts, - 10, 0, -1, 0)); + 10, 0, -1, 0)); len += sprintf(buffer + len, " carrier event %s\n", SkNumber(test_buf, pPnmiStat->StatRxCarrierCts, - 10, 0, -1, 0)); + 10, 0, -1, 0)); len += sprintf(buffer + len, " jabber %s\n", SkNumber(test_buf, pPnmiStat->StatRxJabberCts, - 10, 0, -1, 0)); + 10, 0, -1, 0)); /*Transmit statistics */ - len += sprintf(buffer + len, + len += sprintf(buffer + len, "\nTransmit statistics\n\n"); - + len += sprintf(buffer + len, "Transmited bytes %s\n", SkNumber(test_buf, pPnmiStat->StatTxOctetsOkCts, @@ -363,7 +363,7 @@ void *data) len += sprintf(buffer + len, " window %ld\n", pAC->stats.tx_window_errors); - + } } SkgeProcDev = next; @@ -381,9 +381,6 @@ void *data) } - - - /***************************************************************************** * * SkDoDiv - convert 64bit number @@ -509,9 +506,9 @@ char * SkNumber(char * str, long long num, int base, int size, int precision *str++ = tmp[i]; while (size-- > 0) *str++ = ' '; - + str[0] = '\0'; - + return strorg; } diff --git a/drivers/sk98lin/skqueue.c b/drivers/sk98lin/skqueue.c index c9740e316b..c49baed4f0 100644 --- a/drivers/sk98lin/skqueue.c +++ b/drivers/sk98lin/skqueue.c @@ -29,60 +29,60 @@ * $Log: skqueue.c,v $ * Revision 1.18 2002/05/07 14:11:11 rwahl * Fixed Watcom Precompiler error. - * + * * Revision 1.17 2002/03/25 10:06:41 mkunz * SkIgnoreEvent deleted - * + * * Revision 1.16 2002/03/15 10:51:59 mkunz * Added event classes for link aggregation - * + * * Revision 1.15 1999/11/22 13:36:29 cgoos * Changed license header to GPL. - * + * * Revision 1.14 1998/10/15 15:11:35 gklug * fix: ID_sccs to SysKonnectFileId - * + * * Revision 1.13 1998/09/08 08:47:52 gklug * add: init level handling - * + * * Revision 1.12 1998/09/08 07:43:20 gklug * fix: Sirq Event function name - * + * * Revision 1.11 1998/09/08 05:54:34 gklug * chg: define SK_CSUM is replaced by SK_USE_CSUM - * + * * Revision 1.10 1998/09/03 14:14:49 gklug * add: CSUM and HWAC Eventclass and function. - * + * * Revision 1.9 1998/08/19 09:50:50 gklug * fix: remove struct keyword from c-code (see CCC) add typedefs - * + * * Revision 1.8 1998/08/17 13:43:11 gklug * chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR - * + * * Revision 1.7 1998/08/14 07:09:11 gklug * fix: chg pAc -> pAC - * + * * Revision 1.6 1998/08/11 12:13:14 gklug * add: return code feature of Event service routines * add: correct Error log calls - * + * * Revision 1.5 1998/08/07 12:53:45 gklug * fix: first compiled version - * + * * Revision 1.4 1998/08/07 09:20:48 gklug * adapt functions to C coding conventions. - * + * * Revision 1.3 1998/08/05 11:29:32 gklug * rmv: Timer event entry. Timer will queue event directly - * + * * Revision 1.2 1998/07/31 11:22:40 gklug * Initial version - * + * * Revision 1.1 1998/07/30 15:14:01 gklug * Initial version. Adapted from SMT - * - * + * + * * ******************************************************************************/ @@ -175,7 +175,7 @@ SK_IOC Ioc) /* Io context */ while (pEv != pAC->Event.EvPut) { PRINTF("dispatch Class %d Event %d\n",pEv->Class,pEv->Event) ; switch(Class = pEv->Class) { -#ifndef SK_USE_LAC_EV +#ifndef SK_USE_LAC_EV case SKGE_RLMT : /* RLMT Event */ Rtv = SkRlmtEvent(pAC,Ioc,pEv->Event,pEv->Para); break ; @@ -189,16 +189,16 @@ SK_IOC Ioc) /* Io context */ case SKGE_DRV : /* Driver Event */ Rtv = SkDrvEvent(pAC,Ioc,pEv->Event,pEv->Para); break ; -#ifndef SK_USE_SW_TIMER +#ifndef SK_USE_SW_TIMER case SKGE_HWAC : Rtv = SkGeSirqEvent(pAC,Ioc,pEv->Event,pEv->Para); break ; #else /* !SK_USE_SW_TIMER */ - case SKGE_SWT : + case SKGE_SWT : Rtv = SkSwtEvent(pAC,Ioc,pEv->Event,pEv->Para); break ; #endif /* !SK_USE_SW_TIMER */ -#ifdef SK_USE_LAC_EV +#ifdef SK_USE_LAC_EV case SKGE_LACP : Rtv = SkLacpEvent(pAC,Ioc,pEv->Event,pEv->Para); break ; diff --git a/drivers/sk98lin/skrlmt.c b/drivers/sk98lin/skrlmt.c index 1e707c9973..f8a3b41f0f 100644 --- a/drivers/sk98lin/skrlmt.c +++ b/drivers/sk98lin/skrlmt.c @@ -28,17 +28,17 @@ * $Log: skrlmt.c,v $ * Revision 1.68 2003/01/31 15:26:56 rschmidt * Added init for local variables in RlmtInit(). - * + * * Revision 1.67 2003/01/31 14:12:41 mkunz * single port adapter runs now with two identical MAC addresses - * + * * Revision 1.66 2002/09/23 15:14:19 rwahl * - Reset broadcast timestamp on link down. * - Editorial corrections. - * + * * Revision 1.65 2002/07/22 14:29:48 rwahl * - Removed BRK statement from debug check. - * + * * Revision 1.64 2001/11/28 19:36:14 rwahl * - RLMT Packets sent to an invalid MAC address in CLP/CLPSS mode * (#10650). @@ -46,220 +46,220 @@ * (no dependency to RLMT module). * - Enabled dbg output for entry/exit of event functions. * - Editorial changes. - * + * * Revision 1.63 2001/10/26 07:53:18 afischer * Port switching bug in `check local link` mode - * + * * Revision 1.62 2001/07/03 12:16:30 mkunz * New Flag ChgBcPrio (Change priority of last broadcast received) - * + * * Revision 1.61 2001/03/14 12:52:08 rassmann * Fixed reporting of active port up/down to PNMI. - * + * * Revision 1.60 2001/02/21 16:02:25 gklug * fix: when RLMT starts set Active Port for PNMI - * + * * Revision 1.59 2001/02/16 14:38:19 rassmann * Initializing some pointers earlier in the init phase. * Rx Mbufs are freed if the net which they belong to is stopped. - * + * * Revision 1.58 2001/02/14 14:06:31 rassmann * Editorial changes. - * + * * Revision 1.57 2001/02/05 14:25:26 rassmann * Prepared RLMT for transparent operation. - * + * * Revision 1.56 2001/01/30 10:29:09 rassmann * Not checking switching befor RlmtStart. * Editorial changes. - * + * * Revision 1.55 2001/01/22 13:41:38 rassmann * Supporting two nets on dual-port adapters. - * + * * Revision 1.54 2000/11/30 13:25:07 rassmann * Setting SK_TICK_INCR to 1 by default. - * + * * Revision 1.53 2000/11/30 10:48:07 cgoos * Changed definition of SK_RLMT_BC_DELTA. - * + * * Revision 1.52 2000/11/27 12:50:03 rassmann * Checking ports after receiving broadcasts. - * + * * Revision 1.51 2000/11/17 08:58:00 rassmann * Moved CheckSwitch from SK_RLMT_PACKET_RECEIVED to SK_RLMT_TIM event. - * + * * Revision 1.50 2000/11/09 12:24:34 rassmann * Indicating that segmentation check is not running anymore after * SkRlmtCheckSeg(). * Restarting segmentation timer after segmentation log. * Editorial changes. - * + * * Revision 1.49 1999/11/22 13:38:02 cgoos * Changed license header to GPL. * Added initialization to some variables to avoid compiler warnings. - * + * * Revision 1.48 1999/10/04 14:01:17 rassmann * Corrected reaction to reception of BPDU frames (#10441). - * + * * Revision 1.47 1999/07/20 12:53:36 rassmann * Fixed documentation errors for lookahead macros. - * + * * Revision 1.46 1999/05/28 13:29:16 rassmann * Replaced C++-style comment. - * + * * Revision 1.45 1999/05/28 13:28:08 rassmann * Corrected syntax error (xxx). - * + * * Revision 1.44 1999/05/28 11:15:54 rassmann * Changed behaviour to reflect Design Spec v1.2. * Controlling Link LED(s). * Introduced RLMT Packet Version field in RLMT Packet. * Newstyle lookahead macros (checking meta-information before looking at * the packet). - * + * * Revision 1.43 1999/01/28 13:12:43 rassmann * Corrected Lookahead (bug introduced in previous Rev.). - * + * * Revision 1.42 1999/01/28 12:50:41 rassmann * Not using broadcast time stamps in CheckLinkState mode. - * + * * Revision 1.41 1999/01/27 14:13:02 rassmann * Monitoring broadcast traffic. * Switching more reliably and not too early if switch is * configured for spanning tree. - * + * * Revision 1.40 1999/01/22 13:17:30 rassmann * Informing PNMI of NET_UP. * Clearing RLMT multicast addresses before setting them for the first time. * Reporting segmentation earlier, setting a "quiet time" * after a report. - * + * * Revision 1.39 1998/12/10 15:29:53 rassmann * Corrected SuspectStatus in SkRlmtBuildCheckChain(). * Corrected CHECK_SEG mode. - * + * * Revision 1.38 1998/12/08 13:11:23 rassmann * Stopping SegTimer at RlmtStop. - * + * * Revision 1.37 1998/12/07 16:51:42 rassmann * Corrected comments. - * + * * Revision 1.36 1998/12/04 10:58:56 rassmann * Setting next pointer to NULL when receiving. - * + * * Revision 1.35 1998/12/03 16:12:42 rassmann * Ignoring/correcting illegal PrefPort values. - * + * * Revision 1.34 1998/12/01 11:45:35 rassmann * Code cleanup. - * + * * Revision 1.33 1998/12/01 10:29:32 rassmann * Starting standby ports before getting the net up. * Checking if a port is started when the link comes up. - * + * * Revision 1.32 1998/11/30 16:19:50 rassmann * New default for PortNoRx. - * + * * Revision 1.31 1998/11/27 19:17:13 rassmann * Corrected handling of LINK_DOWN coming shortly after LINK_UP. - * + * * Revision 1.30 1998/11/24 12:37:31 rassmann * Implemented segmentation check. - * + * * Revision 1.29 1998/11/18 13:04:32 rassmann * Secured PortUpTimer event. * Waiting longer before starting standby port(s). - * + * * Revision 1.28 1998/11/17 13:43:04 rassmann * Handling (logical) tx failure. * Sending packet on logical address after PORT_SWITCH. - * + * * Revision 1.27 1998/11/13 17:09:50 rassmann * Secured some events against being called in wrong state. - * + * * Revision 1.26 1998/11/13 16:56:54 rassmann * Added macro version of SkRlmtLookaheadPacket. - * + * * Revision 1.25 1998/11/06 18:06:04 rassmann * Corrected timing when RLMT checks fail. * Clearing tx counter earlier in periodical checks. - * + * * Revision 1.24 1998/11/05 10:37:27 rassmann * Checking destination address in Lookahead. - * + * * Revision 1.23 1998/11/03 13:53:49 rassmann * RLMT should switch now (at least in mode 3). - * + * * Revision 1.22 1998/10/29 14:34:49 rassmann * Clearing SK_RLMT struct at startup. * Initializing PortsUp during SK_RLMT_START. - * + * * Revision 1.21 1998/10/28 11:30:17 rassmann * Default mode is now SK_RLMT_CHECK_LOC_LINK. - * + * * Revision 1.20 1998/10/26 16:02:03 rassmann * Ignoring LINK_DOWN for links that are down. - * + * * Revision 1.19 1998/10/22 15:54:01 rassmann * Corrected EtherLen. * Starting Link Check when second port comes up. - * + * * Revision 1.18 1998/10/22 11:39:50 rassmann * Corrected signed/unsigned mismatches. * Corrected receive list handling and address recognition. - * + * * Revision 1.17 1998/10/19 17:01:20 rassmann * More detailed checking of received packets. - * + * * Revision 1.16 1998/10/15 15:16:34 rassmann * Finished Spanning Tree checking. * Checked with lint. - * + * * Revision 1.15 1998/09/24 19:16:07 rassmann * Code cleanup. * Introduced Timer for PORT_DOWN due to no RX. - * + * * Revision 1.14 1998/09/18 20:27:14 rassmann * Added address override. - * + * * Revision 1.13 1998/09/16 11:31:48 rassmann * Including skdrv1st.h again. :( - * + * * Revision 1.12 1998/09/16 11:09:50 rassmann * Syntax corrections. - * + * * Revision 1.11 1998/09/15 12:32:03 rassmann * Syntax correction. - * + * * Revision 1.10 1998/09/15 11:28:49 rassmann * Syntax corrections. - * + * * Revision 1.9 1998/09/14 17:07:37 rassmann * Added code for port checking via LAN. * Changed Mbuf definition. - * + * * Revision 1.8 1998/09/07 11:14:14 rassmann * Syntax corrections. - * + * * Revision 1.7 1998/09/07 09:06:07 rassmann * Syntax corrections. - * + * * Revision 1.6 1998/09/04 19:41:33 rassmann * Syntax corrections. * Started entering code for checking local links. - * + * * Revision 1.5 1998/09/04 12:14:27 rassmann * Interface cleanup. - * + * * Revision 1.4 1998/09/02 16:55:28 rassmann * Updated to reflect new DRV/HWAC/RLMT interface. - * + * * Revision 1.3 1998/08/27 14:29:03 rassmann * Code cleanup. - * + * * Revision 1.2 1998/08/27 14:26:24 rassmann * Updated interface. - * + * * Revision 1.1 1998/08/21 08:26:49 rassmann * First public version. * @@ -668,7 +668,7 @@ int Level) /* Initialization Level */ } (void)SkAddrMcClear(pAC, IoC, i, SK_ADDR_PERMANENT | SK_MC_SW_ONLY); - + /* Add RLMT MC address. */ (void)SkAddrMcAdd(pAC, IoC, i, &SkRlmtMcAddr, SK_ADDR_PERMANENT); @@ -680,34 +680,34 @@ int Level) /* Initialization Level */ (void)SkAddrMcUpdate(pAC, IoC, i); } - VirtualMacAddressSet = SK_FALSE; + VirtualMacAddressSet = SK_FALSE; /* Read virtual MAC address from Control Register File. */ for (j = 0; j < SK_MAC_ADDR_LEN; j++) { - - SK_IN8(IoC, B2_MAC_1 + j, &VirtualMacAddress.a[j]); - VirtualMacAddressSet |= VirtualMacAddress.a[j]; + + SK_IN8(IoC, B2_MAC_1 + j, &VirtualMacAddress.a[j]); + VirtualMacAddressSet |= VirtualMacAddress.a[j]; } - - PhysicalAMacAddressSet = SK_FALSE; + + PhysicalAMacAddressSet = SK_FALSE; /* Read physical MAC address for MAC A from Control Register File. */ for (j = 0; j < SK_MAC_ADDR_LEN; j++) { - - SK_IN8(IoC, B2_MAC_2 + j, &PhysicalAMacAddress.a[j]); - PhysicalAMacAddressSet |= PhysicalAMacAddress.a[j]; + + SK_IN8(IoC, B2_MAC_2 + j, &PhysicalAMacAddress.a[j]); + PhysicalAMacAddressSet |= PhysicalAMacAddress.a[j]; } - /* check if the two mac addresses contain reasonable values */ - if (!VirtualMacAddressSet || !PhysicalAMacAddressSet) { + /* check if the two mac addresses contain reasonable values */ + if (!VirtualMacAddressSet || !PhysicalAMacAddressSet) { - pAC->Rlmt.RlmtOff = SK_TRUE; - } + pAC->Rlmt.RlmtOff = SK_TRUE; + } - /* if the two mac addresses are equal switch off the RLMT_PRE_LOOKAHEAD - and the RLMT_LOOKAHEAD macros */ - else if (SK_ADDR_EQUAL(PhysicalAMacAddress.a, VirtualMacAddress.a)) { + /* if the two mac addresses are equal switch off the RLMT_PRE_LOOKAHEAD + and the RLMT_LOOKAHEAD macros */ + else if (SK_ADDR_EQUAL(PhysicalAMacAddress.a, VirtualMacAddress.a)) { - pAC->Rlmt.RlmtOff = SK_TRUE; - } + pAC->Rlmt.RlmtOff = SK_TRUE; + } else { pAC->Rlmt.RlmtOff = SK_FALSE; } @@ -751,14 +751,14 @@ SK_U32 NetIdx) /* Net Number */ FirstMacUp = NULL; PrevMacUp = NULL; - + if (!(pAC->Rlmt.Net[NetIdx].RlmtMode & SK_RLMT_CHECK_LOC_LINK)) { for (i = 0; i < pAC->Rlmt.Net[i].NumPorts; i++) { pAC->Rlmt.Net[NetIdx].Port[i]->PortsChecked = 0; } return; /* Done. */ } - + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, ("SkRlmtBuildCheckChain.\n")) @@ -843,7 +843,7 @@ SK_MAC_ADDR *DestAddr) /* Destination address */ #ifdef DEBUG SK_U8 CheckSrc = 0; SK_U8 CheckDest = 0; - + for (i = 0; i < SK_MAC_ADDR_LEN; ++i) { CheckSrc |= SrcAddr->a[i]; CheckDest |= DestAddr->a[i]; @@ -878,7 +878,7 @@ SK_MAC_ADDR *DestAddr) /* Destination address */ for (i = 0; i < 4; i++) { pPacket->Random[i] = pAC->Rlmt.Port[PortNumber].Random[i]; } - + SK_U16_TO_NETWORK_ORDER( SK_RLMT_PACKET_VERSION, &pPacket->RlmtPacketVersion[0]); @@ -1156,7 +1156,7 @@ SK_MBUF *pMb) /* Received packet */ if ((pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot) != 0) { SkRlmtPortReceives(pAC, IoC, PortNumber); } - + /* Check destination address. */ if (!SK_ADDR_EQUAL(pAPort->CurrentMacAddress.a, pRPacket->DstAddr) && @@ -1544,7 +1544,7 @@ SK_U32 PortNumber) /* Port to check */ PortNumber, pRPort->PacketsPerTimeSlot - pRPort->BpduPacketsPerTimeSlot, pRPort->PacketsPerTimeSlot)) - + SkRlmtPortReceives(pAC, IoC, PortNumber); if (pAC->Rlmt.CheckSwitch) { SkRlmtCheckSwitch(pAC, IoC, pRPort->Net->NetNumber); @@ -1584,14 +1584,14 @@ SK_U32 *pSelect) /* New active port */ BcTimeStamp = 0; /* Not totally necessary, but feeling better. */ PortFound = SK_FALSE; - + /* Select port with the latest TimeStamp. */ for (i = 0; i < (SK_U32)pAC->GIni.GIMacsFound; i++) { SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, ("TimeStamp Port %d (Down: %d, NoRx: %d): %08x %08x.\n", i, - pAC->Rlmt.Port[i].PortDown, pAC->Rlmt.Port[i].PortNoRx, + pAC->Rlmt.Port[i].PortDown, pAC->Rlmt.Port[i].PortNoRx, *((SK_U32*)(&pAC->Rlmt.Port[i].BcTimeStamp) + OFFS_HI32), *((SK_U32*)(&pAC->Rlmt.Port[i].BcTimeStamp) + OFFS_LO32))) @@ -1619,7 +1619,7 @@ SK_U32 *pSelect) /* New active port */ pAC->Rlmt.Port[i].BcTimeStamp + SK_RLMT_BC_DELTA > BcTimeStamp)) { PortFound = SK_FALSE; - + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, ("Port %d received a broadcast at a similar time.\n", i)) break; @@ -1974,7 +1974,7 @@ SK_U32 NetIdx) /* Net index */ /* check of ChgBcPrio flag added */ if ((pAC->Rlmt.Net[0].RlmtMode != SK_RLMT_MODE_CLS) && (!pAC->Rlmt.Net[0].ChgBcPrio)) { - + if (!PortFound) { PortFound = SkRlmtSelectBcRx( pAC, IoC, Active, PrefPort, &Para.Para32[1]); @@ -2130,7 +2130,7 @@ SK_U32 NetIdx) /* Net number */ break; } } - + if (!Equal) { SK_ERR_LOG(pAC, SK_ERRCL_COMM, SKERR_RLMT_E005, SKERR_RLMT_E005_MSG); Para.Para32[0] = NetIdx; @@ -2330,7 +2330,7 @@ SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 Undefined */ Para2.Para32[1] = (SK_U32)-1; SkTimerStart(pAC, IoC, &pRPort->UpTimer, SK_RLMT_PORTUP_TIM_VAL, SKGE_RLMT, SK_RLMT_PORTUP_TIM, Para2); - + /* Later: if (pAC->Rlmt.RlmtMode & SK_RLMT_CHECK_LOC_LINK) && */ if ((pRPort->Net->RlmtMode & SK_RLMT_TRANSPARENT) == 0 && (pRPort->Net->RlmtMode & SK_RLMT_CHECK_LINK) != 0 && @@ -2457,7 +2457,7 @@ SK_EVPARA Para) /* SK_U32 PortNumber; SK_U32 -1 */ ("SK_RLMT_PORTDOWN* Event (%d) EMPTY.\n", Event)) return; } - + /* Stop port's timers. */ SkTimerStop(pAC, IoC, &pRPort->UpTimer); SkTimerStop(pAC, IoC, &pRPort->DownRxTimer); @@ -2947,7 +2947,7 @@ SK_EVPARA Para) /* SK_U32 NetNumber; SK_U32 -1 */ } } #endif /* xDEBUG */ - + SkRlmtCheckSeg(pAC, IoC, Para.Para32[0]); SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, @@ -2978,7 +2978,7 @@ SK_EVPARA Para) /* SK_MBUF *pMb */ SK_MBUF *pNextMb; SK_U32 NetNumber; - + SK_DBG_MSG(pAC, SK_DBGMOD_RLMT, SK_DBGCAT_CTRL, ("SK_RLMT_PACKET_RECEIVED Event BEGIN.\n")) @@ -3261,7 +3261,7 @@ SK_EVPARA Para) /* SK_U32 NumNets; SK_U32 -1 */ pAC->Rlmt.Net[1].NumPorts = pAC->GIni.GIMacsFound - 1; pAC->Rlmt.Net[0].NumPorts = pAC->GIni.GIMacsFound - pAC->Rlmt.Net[1].NumPorts; - + pAC->Rlmt.NumNets = Para.Para32[0]; for (i = 0; (SK_U32)i < pAC->Rlmt.NumNets; i++) { pAC->Rlmt.Net[i].RlmtState = SK_RLMT_RS_INIT; @@ -3432,7 +3432,7 @@ SK_U32 Event, /* Event code */ SK_EVPARA Para) /* Event-specific parameter */ { switch (Event) { - + /* ----- PORT events ----- */ case SK_RLMT_PORTSTART_TIM: /* From RLMT via TIME. */ diff --git a/drivers/sk98lin/sktimer.c b/drivers/sk98lin/sktimer.c index 67431d96aa..37cd4c9fe1 100644 --- a/drivers/sk98lin/sktimer.c +++ b/drivers/sk98lin/sktimer.c @@ -29,45 +29,45 @@ * $Log: sktimer.c,v $ * Revision 1.12 1999/11/22 13:38:51 cgoos * Changed license header to GPL. - * + * * Revision 1.11 1998/12/17 13:24:13 gklug * fix: restart problem: do NOT destroy timer queue if init 1 is done - * + * * Revision 1.10 1998/10/15 15:11:36 gklug * fix: ID_sccs to SysKonnectFileId - * + * * Revision 1.9 1998/09/15 15:15:04 cgoos * Changed TRUE/FALSE to SK_TRUE/SK_FALSE - * + * * Revision 1.8 1998/09/08 08:47:55 gklug * add: init level handling - * + * * Revision 1.7 1998/08/19 09:50:53 gklug * fix: remove struct keyword from c-code (see CCC) add typedefs - * + * * Revision 1.6 1998/08/17 13:43:13 gklug * chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR - * + * * Revision 1.5 1998/08/14 07:09:14 gklug * fix: chg pAc -> pAC - * + * * Revision 1.4 1998/08/07 12:53:46 gklug * fix: first compiled version - * + * * Revision 1.3 1998/08/07 09:31:53 gklug * fix: delta spelling - * + * * Revision 1.2 1998/08/07 09:31:02 gklug * adapt functions to new c coding conventions * rmv: "fast" handling * chg: inserting of new timer in queue. * chg: event queue generation when timer runs out - * + * * Revision 1.1 1998/08/05 11:27:55 gklug * first version: adapted from SMT - * - * - * + * + * + * * ******************************************************************************/ diff --git a/drivers/sk98lin/skvpd.c b/drivers/sk98lin/skvpd.c index f4558fabf8..3b81e67df8 100644 --- a/drivers/sk98lin/skvpd.c +++ b/drivers/sk98lin/skvpd.c @@ -30,80 +30,80 @@ * Replaced check for PCI device Id from YUKON with GENESIS * to set the VPD size in VpdInit() * Editorial changes - * + * * Revision 1.36 2002/11/14 15:16:56 gheinig * Added const specifier to key and buf parameters for VpdPara, VpdRead * and VpdWrite for Diag 7 GUI - * + * * Revision 1.35 2002/10/21 14:31:59 gheinig * Took out CVS web garbage at head of file - * + * * Revision 1.34 2002/10/21 11:47:24 gheinig * Reverted to version 1.32 due to unwanted commit - * + * * Revision 1.32 2002/10/14 16:04:29 rschmidt * Added saving of VPD ROM Size from PCI_OUR_REG_2 * Avoid reading of PCI_OUR_REG_2 in VpdTransferBlock() * Editorial changes - * + * * Revision 1.31 2002/09/10 09:21:32 mkarl * Replaced all if(GIChipId == CHIP_ID_GENESIS) with new entry GIGenesis - * + * * Revision 1.30 2002/09/09 14:43:03 mkarl * changes for diagnostics in order to read VPD data before the adapter * has been initialized * editorial changes - * + * * Revision 1.29 2002/07/26 13:20:43 mkarl * added Yukon support * save size of VPD in pAC->vpd.vpd_size - * + * * Revision 1.28 2002/04/02 15:31:47 afischer * Bug fix in VpdWait() - * + * * Revision 1.27 2000/08/10 11:29:06 rassmann * Editorial changes. * Preserving 32-bit alignment in structs for the adapter context. * Removed unused function VpdWriteDword() (#if 0). * Made VpdReadKeyword() available for SKDIAG only. - * + * * Revision 1.26 2000/06/13 08:00:01 mkarl * additional cast to avoid compile problems in 64 bit environment - * + * * Revision 1.25 1999/11/22 13:39:32 cgoos * Changed license header to GPL. - * + * * Revision 1.24 1999/03/11 14:25:49 malthoff * Replace __STDC__ with SK_KR_PROTO. - * + * * Revision 1.23 1999/01/11 15:13:11 gklug * fix: syntax error - * + * * Revision 1.22 1998/10/30 06:41:15 gklug * rmv: WARNING - * + * * Revision 1.21 1998/10/29 07:15:14 gklug * fix: Write Stream function needs verify. - * + * * Revision 1.20 1998/10/28 18:05:08 gklug * chg: no DEBUG in VpdMayWrite - * + * * Revision 1.19 1998/10/28 15:56:11 gklug * fix: Return len at end of ReadStream * fix: Write even less than 4 bytes correctly - * + * * Revision 1.18 1998/10/28 09:00:47 gklug * fix: unreferenced local vars - * + * * Revision 1.17 1998/10/28 08:25:45 gklug * fix: WARNING - * + * * Revision 1.16 1998/10/28 08:17:30 gklug * fix: typo - * + * * Revision 1.15 1998/10/28 07:50:32 gklug * fix: typo - * + * * Revision 1.14 1998/10/28 07:20:38 gklug * chg: Interface functions to use IoC as parameter as well * fix: VpdRead/WriteDWord now returns SK_U32 @@ -112,51 +112,51 @@ * add: VpdRead/Write Stream functions to r/w a stream of data * fix: VpdTransferBlock swapped illegal * add: VpdMayWrite - * + * * Revision 1.13 1998/10/22 10:02:37 gklug * fix: SysKonnectFileId typo - * + * * Revision 1.12 1998/10/20 10:01:01 gklug * fix: parameter to SkOsGetTime - * + * * Revision 1.11 1998/10/15 12:51:48 malthoff * Remove unrequired parameter p in vpd_setup_para(). - * + * * Revision 1.10 1998/10/08 14:52:43 malthoff * Remove CvsId by SysKonnectFileId. - * + * * Revision 1.9 1998/09/16 07:33:52 malthoff * replace memcmp() by SK_MEMCMP and * memcpy() by SK_MEMCPY() to be * independent from the 'C' Standard Library. - * + * * Revision 1.8 1998/08/19 12:52:35 malthoff * compiler fix: use SK_VPD_KEY instead of S_VPD. - * + * * Revision 1.7 1998/08/19 08:14:01 gklug * fix: remove struct keyword as much as possible from the C-code (see CCC) - * + * * Revision 1.6 1998/08/18 13:03:58 gklug * SkOsGetTime now returns SK_U64 - * + * * Revision 1.5 1998/08/18 08:17:29 malthoff * Ensure we issue a VPD read in vpd_read_dword(). * Discard all VPD keywords other than Vx or Yx, where * x is '0..9' or 'A..Z'. - * + * * Revision 1.4 1998/07/03 14:52:19 malthoff * Add category SK_DBGCAT_FATAL to some debug macros. * bug fix: correct the keyword name check in vpd_write(). - * + * * Revision 1.3 1998/06/26 11:16:53 malthoff * Correct the modified File Identifier. - * + * * Revision 1.2 1998/06/26 11:13:43 malthoff * Modify the File Identifier. - * + * * Revision 1.1 1998/06/19 14:11:08 malthoff * Created, Tests with AIX were performed successfully - * + * * ******************************************************************************/ @@ -224,9 +224,9 @@ int event) /* event to wait for (VPD_READ / VPD_write) completion*/ ("ERROR:VPD wait timeout\n")); return(1); } - + VPD_IN16(pAC, IoC, PCI_VPD_ADR_REG, &state); - + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, ("state = %x, event %x\n",state,event)); } while((int)(state & PCI_VPD_FLAG) == event); @@ -267,7 +267,7 @@ int addr) /* VPD address */ Rtv = 0; VPD_IN32(pAC, IoC, PCI_VPD_DAT_REG, &Rtv); - + SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, ("VPD read dword data = 0x%x\n",Rtv)); return(Rtv); @@ -412,9 +412,9 @@ int Len) /* number of bytes to read / to write */ } for (j = 0; j <= (int)(i%sizeof(SK_U32)); j++, pComp++) { - + VPD_IN8(pAC, IoC, PCI_VPD_DAT_REG + j, &Data); - + if (Data != *pComp) { /* Verify Error */ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, @@ -427,7 +427,7 @@ int Len) /* number of bytes to read / to write */ return(Len); } - + /* * Read one Stream of 'len' bytes of VPD data, starting at 'addr' from @@ -493,14 +493,14 @@ int dir) /* transfer direction may be VPD_READ or VPD_WRITE */ return(0); vpd_rom_size = pAC->vpd.rom_size; - + if (addr > vpd_rom_size - 4) { SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, ("Address error: 0x%x, exp. < 0x%x\n", addr, vpd_rom_size - 4)); return(0); } - + if (addr + len > vpd_rom_size) { len = vpd_rom_size - addr; SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR, @@ -571,13 +571,13 @@ SK_IOC IoC) /* IO Context */ SK_U32 our_reg2; SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_INIT, ("VpdInit .. ")); - + VPD_IN16(pAC, IoC, PCI_DEVICE_ID, &dev_id); - + VPD_IN32(pAC, IoC, PCI_OUR_REG_2, &our_reg2); - + pAC->vpd.rom_size = 256 << ((our_reg2 & PCI_VPD_ROM_SZ) >> 14); - + /* * this function might get used before the hardware is initialized * therefore we cannot always trust in GIChipId @@ -608,7 +608,7 @@ SK_IOC IoC) /* IO Context */ ("Block Read Error\n")); return(1); } - + pAC->vpd.vpd_size = vpd_size; /* find the end tag of the RO area */ @@ -617,7 +617,7 @@ SK_IOC IoC) /* IO Context */ ("Encoding Error: RV Tag not found\n")); return(1); } - + if (r->p_val + r->p_len > pAC->vpd.vpd_buf + vpd_size/2) { SK_DBG_MSG(pAC,SK_DBGMOD_VPD,SK_DBGCAT_ERR | SK_DBGCAT_FATAL, ("Encoding Error: Invalid VPD struct size\n")); @@ -629,7 +629,7 @@ SK_IOC IoC) /* IO Context */ for (i = 0, x = 0; (unsigned)i <= (unsigned)vpd_size/2 - r->p_len; i++) { x += pAC->vpd.vpd_buf[i]; } - + if (x != 0) { /* checksum error */ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, @@ -643,7 +643,7 @@ SK_IOC IoC) /* IO Context */ ("Encoding Error: RV Tag not found\n")); return(1); } - + if (r->p_val < pAC->vpd.vpd_buf + vpd_size/2) { SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_ERR | SK_DBGCAT_FATAL, ("Encoding Error: Invalid VPD struct size\n")); @@ -879,7 +879,7 @@ int op) /* operation to do: ADD_KEY or OWR_KEY */ SK_DBG_MSG(pAC, SK_DBGMOD_VPD, SK_DBGCAT_CTRL, ("VPD setup para key = %s, val = %s\n",key,buf)); - + vpd_size = pAC->vpd.vpd_size; rtv = 0; @@ -1281,7 +1281,6 @@ SK_IOC IoC) /* IO Context */ } - /* * Read the contents of the VPD EEPROM and copy it to the VPD buffer * if not already done. If the keyword "VF" is not present it will be diff --git a/drivers/sk98lin/skxmac2.c b/drivers/sk98lin/skxmac2.c index 9c87b2393f..e6b5a95d4a 100644 --- a/drivers/sk98lin/skxmac2.c +++ b/drivers/sk98lin/skxmac2.c @@ -31,51 +31,51 @@ * Disabled auto-update for speed, duplex and flow-control when * auto-negotiation is not enabled (Bug Id #10766). * Editorial changes. - * + * * Revision 1.90 2003/01/29 13:35:19 rschmidt * Increment Rx FIFO Overflow counter only in DEBUG-mode. * Corrected define for blinking active LED. - * + * * Revision 1.89 2003/01/28 16:37:45 rschmidt * Changed init for blinking active LED - * + * * Revision 1.88 2003/01/28 10:09:38 rschmidt * Added debug outputs in SkGmInitMac(). * Added customized init of LED registers in SkGmInitPhyMarv(), * for blinking active LED (#ifdef ACT_LED_BLINK) and * for normal duplex LED (#ifdef DUP_LED_NORMAL). * Editorial changes. - * + * * Revision 1.87 2002/12/10 14:39:05 rschmidt * Improved initialization of GPHY in SkGmInitPhyMarv(). * Editorial changes. - * + * * Revision 1.86 2002/12/09 15:01:12 rschmidt * Added setup of Ext. PHY Specific Ctrl Reg (downshift feature). - * + * * Revision 1.85 2002/12/05 14:09:16 rschmidt * Improved avoiding endless loop in SkGmPhyWrite(), SkGmPhyWrite(). * Added additional advertising for 10Base-T when 100Base-T is selected. * Added case SK_PHY_MARV_FIBER for YUKON Fiber adapter. * Editorial changes. - * + * * Revision 1.84 2002/11/15 12:50:09 rschmidt * Changed SkGmCableDiagStatus() when getting results. - * + * * Revision 1.83 2002/11/13 10:28:29 rschmidt * Added some typecasts to avoid compiler warnings. - * + * * Revision 1.82 2002/11/13 09:20:46 rschmidt * Replaced for(..) with do {} while (...) in SkXmUpdateStats(). * Replaced 2 macros GM_IN16() with 1 GM_IN32() in SkGmMacStatistic(). * Added SkGmCableDiagStatus() for Virtual Cable Test (VCT). * Editorial changes. - * + * * Revision 1.81 2002/10/28 14:28:08 rschmidt * Changed MAC address setup for GMAC in SkGmInitMac(). * Optimized handling of counter overflow IRQ in SkGmOverflowStatus(). * Editorial changes. - * + * * Revision 1.80 2002/10/14 15:29:44 rschmidt * Corrected disabling of all PHY IRQs. * Added WA for deviation #16 (address used for pause packets). @@ -84,22 +84,22 @@ * SkXmTimeStamp() replaced by SkMacTimeStamp(). * Added clearing of GMAC Tx FIFO Underrun IRQ in SkGmIrq(). * Editorial changes. - * + * * Revision 1.79 2002/10/10 15:55:36 mkarl * changes for PLinkSpeedUsed - * + * * Revision 1.78 2002/09/12 09:39:51 rwahl * Removed deactivate code for SIRQ overflow event separate for TX/RX. - * + * * Revision 1.77 2002/09/09 12:26:37 mkarl * added handling for Yukon to SkXmTimeStamp - * + * * Revision 1.76 2002/08/21 16:41:16 rschmidt * Added bit GPC_ENA_XC (Enable MDI crossover) in HWCFG_MODE. * Added forced speed settings in SkGmInitPhyMarv(). * Added settings of full/half duplex capabilities for YUKON Fiber. * Editorial changes. - * + * * Revision 1.75 2002/08/16 15:12:01 rschmidt * Replaced all if(GIChipId == CHIP_ID_GENESIS) with new entry GIGenesis. * Added function SkMacHashing() for ADDR-Module. @@ -110,36 +110,36 @@ * Changed initialization of GPHY in SkGmInitPhyMarv(). * Changed check of parameter in SkXmMacStatistic(). * Editorial changes. - * + * * Revision 1.74 2002/08/12 14:00:17 rschmidt * Replaced usage of Broadcom PHY Ids with defines. * Corrected error messages in SkGmMacStatistic(). * Made SkMacPromiscMode() public for ADDR-Modul. * Editorial changes. - * + * * Revision 1.73 2002/08/08 16:26:24 rschmidt * Improved reset sequence for YUKON in SkGmHardRst() and SkGmInitMac(). * Replaced XMAC Rx High Watermark init value with SK_XM_RX_HI_WM. * Editorial changes. - * + * * Revision 1.72 2002/07/24 15:11:19 rschmidt * Fixed wrong placement of parenthesis. * Editorial changes. - * + * * Revision 1.71 2002/07/23 16:05:18 rschmidt * Added global functions for PHY: SkGePhyRead(), SkGePhyWrite(). * Fixed Tx Counter Overflow IRQ (Bug ID #10730). * Editorial changes. - * + * * Revision 1.70 2002/07/18 14:27:27 rwahl * Fixed syntax error. - * + * * Revision 1.69 2002/07/17 17:08:47 rwahl * Fixed check in SkXmMacStatistic(). - * + * * Revision 1.68 2002/07/16 07:35:24 rwahl * Removed check for cleared mib counter in SkGmResetCounter(). - * + * * Revision 1.67 2002/07/15 18:35:56 rwahl * Added SkXmUpdateStats(), SkGmUpdateStats(), SkXmMacStatistic(), * SkGmMacStatistic(), SkXmResetCounter(), SkGmResetCounter(), @@ -148,7 +148,7 @@ * RX & TX. * Changes to SkGmInitMac(): call to SkGmResetCounter(). * Editorial changes. - * + * * Revision 1.66 2002/07/15 15:59:30 rschmidt * Added PHY Address in SkXmPhyRead(), SkXmPhyWrite(). * Added MIB Clear Counter in SkGmInitMac(). @@ -156,12 +156,12 @@ * Reset all Multicast filtering Hash reg. in SkGmInitMac(). * Added new function: SkGmGetMuxConfig(). * Editorial changes. - * + * * Revision 1.65 2002/06/10 09:35:39 rschmidt * Replaced C++ comments (//). * Added #define VCPU around VCPUwaitTime. * Editorial changes. - * + * * Revision 1.64 2002/06/05 08:41:10 rschmidt * Added function for XMAC2: SkXmTimeStamp(). * Added function for YUKON: SkGmSetRxCmd(). @@ -169,7 +169,7 @@ * Fixed wrong variable in SkXmAutoNegLipaXmac() (debug mode). * SkXmRxTxEnable() replaced by SkMacRxTxEnable(). * Editorial changes. - * + * * Revision 1.63 2002/04/25 13:04:44 rschmidt * Changes for handling YUKON. * Use of #ifdef OTHER_PHY to eliminate code for unused Phy types. @@ -187,94 +187,94 @@ * SkGmAutoNegDoneMarv(), SkGmPhyRead(), SkGmPhyWrite(). * Changes for V-CPU support. * Editorial changes. - * + * * Revision 1.62 2001/08/06 09:50:14 rschmidt * Workaround BCOM Errata #1 for the C5 type. * Editorial changes. - * + * * Revision 1.61 2001/02/09 15:40:59 rassmann * Editorial changes. - * + * * Revision 1.60 2001/02/07 15:02:01 cgoos * Added workaround for Fujitsu switch link down. - * + * * Revision 1.59 2001/01/10 09:38:06 cgoos * Fixed Broadcom C0/A1 Id check for workaround. - * + * * Revision 1.58 2000/11/29 11:30:38 cgoos * Changed DEBUG sections with NW output to xDEBUG - * + * * Revision 1.57 2000/11/27 12:40:40 rassmann * Suppressing preamble after first access to BCom, not before (#10556). - * + * * Revision 1.56 2000/11/09 12:32:48 rassmann * Renamed variables. - * + * * Revision 1.55 2000/11/09 11:30:10 rassmann * WA: Waiting after releasing reset until BCom chip is accessible. - * + * * Revision 1.54 2000/10/02 14:10:27 rassmann * Reading BCOM PHY after releasing reset until it returns a valid value. - * + * * Revision 1.53 2000/07/27 12:22:11 gklug * fix: possible endless loop in XmHardRst. - * + * * Revision 1.52 2000/05/22 08:48:31 malthoff * Fix: #10523 errata valid for all BCOM PHYs. - * + * * Revision 1.51 2000/05/17 12:52:18 malthoff * Fixes BCom link errata (#10523). - * + * * Revision 1.50 1999/11/22 13:40:14 cgoos * Changed license header to GPL. - * + * * Revision 1.49 1999/11/22 08:12:13 malthoff * Add workaround for power consumption feature of BCom C0 chip. - * + * * Revision 1.48 1999/11/16 08:39:01 malthoff * Fix: MDIO preamble suppression is port dependent. - * + * * Revision 1.47 1999/08/27 08:55:35 malthoff * 1000BT: Optimizing MDIO transfer by oppressing MDIO preamble. - * + * * Revision 1.46 1999/08/13 11:01:12 malthoff * Fix for 1000BT: pFlowCtrlMode was not set correctly. - * + * * Revision 1.45 1999/08/12 19:18:28 malthoff * 1000BT Fixes: Do not owerwrite XM_MMU_CMD. * Do not execute BCOM A1 workaround for B1 chips. * Fix pause frame setting. * Always set PHY_B_AC_TX_TST in PHY_BCOM_AUX_CTRL. - * + * * Revision 1.44 1999/08/03 15:23:48 cgoos * Fixed setting of PHY interrupt mask in half duplex mode. - * + * * Revision 1.43 1999/08/03 15:22:17 cgoos * Added some debug output. * Disabled XMac GP0 interrupt for external PHYs. - * + * * Revision 1.42 1999/08/02 08:39:23 malthoff * BCOM PHY: TX LED: To get the mono flop behaviour it is required * to set the LED Traffic Mode bit in PHY_BCOM_P_EXT_CTRL. - * + * * Revision 1.41 1999/07/30 06:54:31 malthoff * Add temp. workarounds for the BCOM Phy revision A1. - * + * * Revision 1.40 1999/06/01 07:43:26 cgoos * Changed Link Mode Status in SkXmAutoNegDone... from FULL/HALF to * AUTOFULL/AUTOHALF. - * + * * Revision 1.39 1999/05/19 07:29:51 cgoos * Changes for 1000Base-T. - * + * * Revision 1.38 1999/04/08 14:35:10 malthoff * Add code for enabling signal detect. Enabling signal detect is disabled. - * + * * Revision 1.37 1999/03/12 13:42:54 malthoff * Add: Jumbo Frame Support. * Add: Receive modes SK_LENERR_OK_ON/OFF and * SK_BIG_PK_OK_ON/OFF in SkXmSetRxCmd(). - * + * * Revision 1.36 1999/03/08 10:10:55 gklug * fix: AutoSensing did switch to next mode even if LiPa indicated offline * @@ -456,7 +456,6 @@ static int SkXmAutoNegDoneNat (SK_AC*, SK_IOC, int); #endif /* OTHER_PHY */ - /****************************************************************************** * * SkXmPhyRead() - Read from XMAC PHY register @@ -477,13 +476,13 @@ SK_U16 *pVal) /* Pointer to Value */ SK_GEPORT *pPrt; pPrt = &pAC->GIni.GP[Port]; - + /* write the PHY register's address */ XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr); - + /* get the PHY register's value */ XM_IN16(IoC, Port, XM_PHY_DATA, pVal); - + if (pPrt->PhyType != SK_PHY_XMAC) { do { XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu); @@ -516,20 +515,20 @@ SK_U16 Val) /* Value */ SK_GEPORT *pPrt; pPrt = &pAC->GIni.GP[Port]; - + if (pPrt->PhyType != SK_PHY_XMAC) { do { XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu); /* wait until 'Busy' is cleared */ } while ((Mmu & XM_MMU_PHY_BUSY) != 0); } - + /* write the PHY register's address */ XM_OUT16(IoC, Port, XM_PHY_ADDR, PhyReg | pPrt->PhyAddr); - + /* write the PHY register's value */ XM_OUT16(IoC, Port, XM_PHY_DATA, Val); - + if (pPrt->PhyType != SK_PHY_XMAC) { do { XM_IN16(IoC, Port, XM_MMU_CMD, &Mmu); @@ -560,14 +559,14 @@ SK_U16 *pVal) /* Pointer to Value */ #ifdef VCPU u_long SimCyle; u_long SimLowTime; - + VCPUgetTime(&SimCyle, &SimLowTime); VCPUprintf(0, "SkGmPhyRead(%u), SimCyle=%u, SimLowTime=%u\n", PhyReg, SimCyle, SimLowTime); #endif /* VCPU */ - + pPrt = &pAC->GIni.GP[Port]; - + /* set PHY-Register offset and 'Read' OpCode (= 1) */ *pVal = (SK_U16)(GM_SMI_CT_PHY_AD(pPrt->PhyAddr) | GM_SMI_CT_REG_AD(PhyReg) | GM_SMI_CT_OP_RD); @@ -575,7 +574,7 @@ SK_U16 *pVal) /* Pointer to Value */ GM_OUT16(IoC, Port, GM_SMI_CTRL, *pVal); GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl); - + /* additional check for MDC/MDIO activity */ if ((Ctrl & GM_SMI_CT_BUSY) == 0) { *pVal = 0; @@ -583,7 +582,7 @@ SK_U16 *pVal) /* Pointer to Value */ } *pVal |= GM_SMI_CT_BUSY; - + do { #ifdef VCPU VCPUwaitTime(1000); @@ -593,7 +592,7 @@ SK_U16 *pVal) /* Pointer to Value */ /* wait until 'ReadValid' is set */ } while (Ctrl == *pVal); - + /* get the PHY register's value */ GM_IN16(IoC, Port, GM_SMI_DATA, pVal); @@ -627,29 +626,29 @@ SK_U16 Val) /* Value */ SK_U32 DWord; u_long SimCyle; u_long SimLowTime; - + VCPUgetTime(&SimCyle, &SimLowTime); VCPUprintf(0, "SkGmPhyWrite(Reg=%u, Val=0x%04x), SimCyle=%u, SimLowTime=%u\n", PhyReg, Val, SimCyle, SimLowTime); #endif /* VCPU */ - + pPrt = &pAC->GIni.GP[Port]; - + /* write the PHY register's value */ GM_OUT16(IoC, Port, GM_SMI_DATA, Val); - + /* set PHY-Register offset and 'Write' OpCode (= 0) */ Val = GM_SMI_CT_PHY_AD(pPrt->PhyAddr) | GM_SMI_CT_REG_AD(PhyReg); GM_OUT16(IoC, Port, GM_SMI_CTRL, Val); GM_IN16(IoC, Port, GM_SMI_CTRL, &Ctrl); - + /* additional check for MDC/MDIO activity */ if ((Ctrl & GM_SMI_CT_BUSY) == 0) { return; } - + Val |= GM_SMI_CT_BUSY; do { @@ -664,7 +663,7 @@ SK_U16 Val) /* Value */ /* wait until 'Busy' is cleared */ } while (Ctrl == Val); - + #ifdef VCPU VCPUgetTime(&SimCyle, &SimLowTime); VCPUprintf(0, "VCPUgetTime(), SimCyle=%u, SimLowTime=%u\n", @@ -697,7 +696,7 @@ SK_U16 *pVal) /* Pointer to Value */ else { r_func = SkGmPhyRead; } - + r_func(pAC, IoC, Port, PhyReg, pVal); } /* SkGePhyRead */ @@ -726,7 +725,7 @@ SK_U16 Val) /* Value */ else { w_func = SkGmPhyWrite; } - + w_func(pAC, IoC, Port, PhyReg, Val); } /* SkGePhyWrite */ @@ -737,7 +736,7 @@ SK_U16 Val) /* Value */ * * Description: * enables / disables promiscuous mode by setting Mode Register (XMAC) or - * Receive Control Register (GMAC) dep. on board type + * Receive Control Register (GMAC) dep. on board type * * Returns: * nothing @@ -752,7 +751,7 @@ SK_BOOL Enable) /* Enable / Disable */ SK_U32 MdReg; if (pAC->GIni.GIGenesis) { - + XM_IN32(IoC, Port, XM_MODE, &MdReg); /* enable or disable promiscuous mode */ if (Enable) { @@ -765,9 +764,9 @@ SK_BOOL Enable) /* Enable / Disable */ XM_OUT32(IoC, Port, XM_MODE, MdReg); } else { - + GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg); - + /* enable or disable unicast and multicast filtering */ if (Enable) { RcReg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); @@ -787,7 +786,7 @@ SK_BOOL Enable) /* Enable / Disable */ * * Description: * enables / disables hashing by setting Mode Register (XMAC) or - * Receive Control Register (GMAC) dep. on board type + * Receive Control Register (GMAC) dep. on board type * * Returns: * nothing @@ -802,7 +801,7 @@ SK_BOOL Enable) /* Enable / Disable */ SK_U32 MdReg; if (pAC->GIni.GIGenesis) { - + XM_IN32(IoC, Port, XM_MODE, &MdReg); /* enable or disable hashing */ if (Enable) { @@ -815,9 +814,9 @@ SK_BOOL Enable) /* Enable / Disable */ XM_OUT32(IoC, Port, XM_MODE, MdReg); } else { - + GM_IN16(IoC, Port, GM_RX_CTRL, &RcReg); - + /* enable or disable multicast filtering */ if (Enable) { RcReg |= GM_RXCR_MCF_ENA; @@ -867,7 +866,7 @@ int Mode) /* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF, XM_IN16(IoC, Port, XM_RX_CMD, &OldRxCmd); RxCmd = OldRxCmd; - + switch (Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) { case SK_STRIP_FCS_ON: RxCmd |= XM_RX_STRIP_FCS; @@ -950,7 +949,7 @@ int Mode) /* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF, SK_U16 RxCmd; if ((Mode & (SK_STRIP_FCS_ON | SK_STRIP_FCS_OFF)) != 0) { - + GM_IN16(IoC, Port, GM_RX_CTRL, &OldRxCmd); RxCmd = OldRxCmd; @@ -968,7 +967,7 @@ int Mode) /* Mode is SK_STRIP_FCS_ON/OFF, SK_STRIP_PAD_ON/OFF, } if ((Mode & (SK_BIG_PK_OK_ON | SK_BIG_PK_OK_OFF)) != 0) { - + GM_IN16(IoC, Port, GM_SERIAL_MODE, &OldRxCmd); RxCmd = OldRxCmd; @@ -1003,11 +1002,11 @@ int Port, /* Port Index (MAC_1 + n) */ int Mode) /* Rx Mode */ { if (pAC->GIni.GIGenesis) { - + SkXmSetRxCmd(pAC, IoC, Port, Mode); } else { - + SkGmSetRxCmd(pAC, IoC, Port, Mode); } } /* SkMacSetRxCmd */ @@ -1031,7 +1030,7 @@ SK_BOOL Enable) /* Enable / Disable */ SK_U16 Word; if (pAC->GIni.GIGenesis) { - + XM_IN16(IoC, Port, XM_TX_CMD, &Word); if (Enable) { @@ -1044,9 +1043,9 @@ SK_BOOL Enable) /* Enable / Disable */ XM_OUT16(pAC, Port, XM_TX_CMD, Word); } else { - + GM_IN16(IoC, Port, GM_TX_CTRL, &Word); - + if (Enable) { Word &= ~GM_TXCR_CRC_DIS; } @@ -1114,7 +1113,7 @@ int Port) /* Port Index (MAC_1 + n) */ SK_U32 MdReg; if (pAC->GIni.GIGenesis) { - + XM_IN32(IoC, Port, XM_MODE, &MdReg); XM_OUT32(IoC, Port, XM_MODE, MdReg | XM_MD_FTF); @@ -1197,18 +1196,18 @@ SK_IOC IoC, /* IO context */ int Port) /* Port Index (MAC_1 + n) */ { SK_U16 ZeroAddr[4] = {0x0000, 0x0000, 0x0000, 0x0000}; - + /* reset the statistics module */ XM_OUT32(IoC, Port, XM_GP_PORT, XM_GP_RES_STAT); /* disable all XMAC IRQs */ XM_OUT16(IoC, Port, XM_IMSK, 0xffff); - + XM_OUT32(IoC, Port, XM_MODE, 0); /* clear Mode Reg */ - + XM_OUT16(IoC, Port, XM_TX_CMD, 0); /* reset TX CMD Reg */ XM_OUT16(IoC, Port, XM_RX_CMD, 0); /* reset RX CMD Reg */ - + /* disable all PHY IRQs */ switch (pAC->GIni.GP[Port].PhyType) { case SK_PHY_BCOM: @@ -1230,7 +1229,7 @@ int Port) /* Port Index (MAC_1 + n) */ /* clear the Exact Match Address registers */ SkXmClrExactAddr(pAC, IoC, Port, 0, 15); - + /* clear the Source Check Address registers */ XM_OUTHASH(IoC, Port, XM_SRC_CHK, &ZeroAddr); @@ -1279,9 +1278,9 @@ int Port) /* Port Index (MAC_1 + n) */ } SK_OUT16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), MFF_SET_MAC_RST); - + SK_IN16(IoC, MR_ADDR(Port, TX_MFF_CTRL1), &Word); - + } while ((Word & MFF_SET_MAC_RST) == 0); } @@ -1329,16 +1328,16 @@ int Port) /* Port Index (MAC_1 + n) */ /* disable all GMAC IRQs */ SK_OUT8(IoC, GMAC_IRQ_MSK, 0); - + /* disable all PHY IRQs */ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0); - + /* clear the Hash Register */ GM_OUTHASH(IoC, Port, GM_MC_ADDR_H1, EmptyHash); /* Enable Unicast and Multicast filtering */ GM_IN16(IoC, Port, GM_RX_CTRL, &RxCtrl); - + GM_OUT16(IoC, Port, GM_RX_CTRL, RxCtrl | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); @@ -1394,17 +1393,17 @@ int Port) /* Port Index (MAC_1 + n) */ SkMacRxTxDisable(pAC, IoC, Port); if (pAC->GIni.GIGenesis) { - + SkXmSoftRst(pAC, IoC, Port); } else { - + SkGmSoftRst(pAC, IoC, Port); } /* flush the MAC's Rx and Tx FIFOs */ SkMacFlushTxFifo(pAC, IoC, Port); - + SkMacFlushRxFifo(pAC, IoC, Port); pPrt->PState = SK_PRT_STOP; @@ -1426,13 +1425,13 @@ SK_AC *pAC, /* adapter context */ SK_IOC IoC, /* IO context */ int Port) /* Port Index (MAC_1 + n) */ { - + if (pAC->GIni.GIGenesis) { - + SkXmHardRst(pAC, IoC, Port); } else { - + SkGmHardRst(pAC, IoC, Port); } @@ -1441,7 +1440,6 @@ int Port) /* Port Index (MAC_1 + n) */ } /* SkMacHardRst */ - /****************************************************************************** * * SkXmInitMac() - Initialize the XMAC II @@ -1496,7 +1494,7 @@ int Port) /* Port Index (MAC_1 + n) */ if (pPrt->PhyType != SK_PHY_XMAC) { SK_IN32(IoC, B2_GP_IO, &Reg); - + if (Port == 0) { Reg |= (GP_DIR_0 | GP_IO_0); /* set to output */ } @@ -1516,7 +1514,7 @@ int Port) /* Port Index (MAC_1 + n) */ * Must be done AFTER first access to BCOM chip. */ XM_IN16(IoC, Port, XM_MMU_CMD, &SWord); - + XM_OUT16(IoC, Port, XM_MMU_CMD, SWord | XM_MMU_NO_PRE); if (pPrt->PhyId1 == PHY_BCOM_ID1_C0) { @@ -1549,7 +1547,7 @@ int Port) /* Port Index (MAC_1 + n) */ * Disable Power Management after reset. */ SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, &SWord); - + SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUX_CTRL, (SK_U16)(SWord | PHY_B_AC_DIS_PM)); @@ -1558,7 +1556,7 @@ int Port) /* Port Index (MAC_1 + n) */ /* Dummy read the Interrupt source register */ XM_IN16(IoC, Port, XM_ISRC, &SWord); - + /* * The auto-negotiation process starts immediately after * clearing the reset. The auto-negotiation process should be @@ -1584,7 +1582,7 @@ int Port) /* Port Index (MAC_1 + n) */ * independent. Remember this when changing. */ SK_IN16(IoC, (B2_MAC_2 + Port * 8 + i * 2), &SWord); - + XM_OUT16(IoC, Port, (XM_SA + i * 2), SWord); } @@ -1637,7 +1635,7 @@ int Port) /* Port Index (MAC_1 + n) */ */ SWord |= XM_RX_DIS_CEXT; } - + XM_OUT16(IoC, Port, XM_RX_CMD, SWord); /* @@ -1706,7 +1704,7 @@ int Port) /* Port Index (MAC_1 + n) */ /* Port State: SK_PRT_STOP */ /* Verify that the reset bit is cleared */ SK_IN32(IoC, MR_ADDR(Port, GMAC_CTRL), &DWord); - + if ((DWord & GMC_RST_SET) != 0) { /* PState does not match HW state */ SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E006, SKERR_HWI_E006MSG); @@ -1745,11 +1743,11 @@ int Port) /* Port Index (MAC_1 + n) */ /* Dummy read the Interrupt source register */ SK_IN16(IoC, GMAC_IRQ_SRC, &SWord); - + #ifndef VCPU /* read Id from PHY */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_ID1, &pPrt->PhyId1); - + SkGmInitPhyMarv(pAC, IoC, Port, SK_FALSE); #endif /* VCPU */ } @@ -1770,7 +1768,7 @@ int Port) /* Port Index (MAC_1 + n) */ case SK_LSPEED_10MBPS: break; } - + /* duplex settings */ if (pPrt->PLinkMode != SK_LMODE_HALF) { /* set full duplex */ @@ -1799,7 +1797,7 @@ int Port) /* Port Index (MAC_1 + n) */ /* disable auto-update for speed, duplex and flow-control */ SWord |= GM_GPCR_AU_ALL_DIS; } - + /* setup General Purpose Control Register */ GM_OUT16(IoC, Port, GM_GP_CTRL, SWord); @@ -1819,23 +1817,23 @@ int Port) /* Port Index (MAC_1 + n) */ #endif /* VCPU */ SWord = JAM_LEN_VAL(3) | JAM_IPG_VAL(11) | IPG_JAM_DATA(26); - + GM_OUT16(IoC, Port, GM_TX_PARAM, SWord); /* configure the Serial Mode Register */ #ifdef VCPU GM_IN16(IoC, Port, GM_SERIAL_MODE, &SWord); #endif /* VCPU */ - + SWord = GM_SMOD_VLAN_ENA | IPG_VAL_FAST_ETH; if (pAC->GIni.GIPortUsage == SK_JUMBO_LINK) { /* enable jumbo mode (Max. Frame Length = 9018) */ SWord |= GM_SMOD_JUMBO_ENA; } - + GM_OUT16(IoC, Port, GM_SERIAL_MODE, SWord); - + /* * configure the GMACs Station Addresses * in PROM you can find our addresses at: @@ -1864,15 +1862,15 @@ int Port) /* Port Index (MAC_1 + n) */ else { GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord); } -#else +#else GM_OUT16(IoC, Port, (GM_SRC_ADDR_1L + i * 4), SWord); #endif /* WA_DEV_16 */ - + /* virtual address: will be used for data */ SK_IN16(IoC, (B2_MAC_1 + Port * 8 + i * 2), &SWord); GM_OUT16(IoC, Port, (GM_SRC_ADDR_2L + i * 4), SWord); - + /* reset Multicast filtering Hash registers 1-3 */ GM_OUT16(IoC, Port, GM_MC_ADDR_H1 + 4*i, 0); } @@ -1887,7 +1885,7 @@ int Port) /* Port Index (MAC_1 + n) */ /* read General Purpose Status */ GM_IN16(IoC, Port, GM_GP_STAT, &SWord); - + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("MAC Stat Reg=0x%04X\n", SWord)); @@ -1970,7 +1968,7 @@ int Port) /* Port Index (MAC_1 + n) */ pPrt = &pAC->GIni.GP[Port]; XM_IN16(IoC, Port, XM_MMU_CMD, &Word); - + if (pPrt->PFlowCtrlStatus == SK_FLOW_STAT_NONE || pPrt->PFlowCtrlStatus == SK_FLOW_STAT_LOC_SEND) { @@ -1984,8 +1982,8 @@ int Port) /* Port Index (MAC_1 + n) */ */ /* Enable Pause Frame Reception */ Word &= ~XM_MMU_IGN_PF; - } - + } + XM_OUT16(IoC, Port, XM_MMU_CMD, Word); XM_IN32(IoC, Port, XM_MODE, &DWord); @@ -2025,7 +2023,7 @@ int Port) /* Port Index (MAC_1 + n) */ /* Disable Pause Mode in MAC Rx FIFO */ SK_OUT16(IoC, MR_ADDR(Port, RX_MFF_CTRL1), MFF_DIS_PAUSE); } - + XM_OUT32(IoC, Port, XM_MODE, DWord); } /* SkXmInitPauseMd*/ @@ -2052,7 +2050,7 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ pPrt = &pAC->GIni.GP[Port]; Ctrl = 0; - + /* Auto-negotiation ? */ if (pPrt->PLinkMode == SK_LMODE_HALF || pPrt->PLinkMode == SK_LMODE_FULL) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, @@ -2158,7 +2156,7 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ /* manually Master/Slave ? */ if (pPrt->PMSMode != SK_MS_MODE_AUTO) { Ctrl2 |= PHY_B_1000C_MSE; - + if (pPrt->PMSMode == SK_MS_MODE_MASTER) { Ctrl2 |= PHY_B_1000C_MSC; } @@ -2191,7 +2189,7 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ * Set Repeater/DTE bit 10 of the 1000Base-T Control Register */ Ctrl2 |= PHY_B_1000C_RD; - + /* Set Full/half duplex capabilities */ switch (pPrt->PLinkMode) { case SK_LMODE_AUTOHALF: @@ -2229,21 +2227,21 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ /* Restart Auto-negotiation */ Ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG; } - + /* Initialize LED register here? */ /* No. Please do it in SkDgXmitLed() (if required) and swap init order of LEDs and XMAC. (MAl) */ - + /* Write 1000Base-T Control Register */ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_1000T_CTRL, Ctrl2); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("1000B-T Ctrl Reg=0x%04X\n", Ctrl2)); - + /* Write AutoNeg Advertisement Register */ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_AUNE_ADV, Ctrl3); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Auto-Neg. Adv. Reg=0x%04X\n", Ctrl3)); - + if (DoLoop) { /* Set the Phy Loopback bit, too */ Ctrl1 |= PHY_CT_LOOP; @@ -2261,7 +2259,7 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ /* Configure LED Traffic Mode and Jumbo Frame usage if specified */ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_P_EXT_CTRL, Ctrl4); - + /* Write to the Phy control register */ SkXmPhyWrite(pAC, IoC, Port, PHY_BCOM_CTRL, Ctrl1); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, @@ -2301,7 +2299,7 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ VCPUprintf(0, "SkGmInitPhyMarv(), Port=%u, DoLoop=%u\n", Port, DoLoop); #else /* VCPU */ - + pPrt = &pAC->GIni.GP[Port]; /* Auto-negotiation ? */ @@ -2311,24 +2309,24 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ else { AutoNeg = SK_TRUE; } - + if (!DoLoop) { /* Read Ext. PHY Specific Control */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl); - + ExtPhyCtrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | PHY_M_EC_MAC_S_MSK); - + ExtPhyCtrl |= PHY_M_EC_M_DSC(1) | PHY_M_EC_S_DSC(1) | PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ); - + SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_EXT_CTRL, ExtPhyCtrl); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Ext.PHYCtrl=0x%04X\n", ExtPhyCtrl)); - + /* Read PHY Control */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl); - + /* Assert software reset */ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CTRL, (SK_U16)(PhyCtrl | PHY_CT_RESET)); @@ -2343,17 +2341,17 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ if (pPrt->PMSMode != SK_MS_MODE_AUTO) { /* enable Manual Master/Slave */ C1000BaseT |= PHY_M_1000C_MSE; - + if (pPrt->PMSMode == SK_MS_MODE_MASTER) { C1000BaseT |= PHY_M_1000C_MSC; /* set it to Master */ } } - + /* Auto-negotiation ? */ if (!AutoNeg) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("InitPhyMarv: no auto-negotiation Port %d\n", Port)); - + if (pPrt->PLinkMode == SK_LMODE_FULL) { /* Set Full Duplex Mode */ PhyCtrl |= PHY_CT_DUP_MD; @@ -2391,9 +2389,9 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ else { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("InitPhyMarv: with auto-negotiation Port %d\n", Port)); - + PhyCtrl |= PHY_CT_ANE; - + if (pAC->GIni.GICopperType) { /* Set Speed capabilities */ switch (pPrt->PLinkSpeed) { @@ -2433,7 +2431,7 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, SKERR_HWI_E015MSG); } - + /* Set Auto-negotiation advertisement */ switch (pPrt->PFlowCtrlMode) { case SK_FLOW_MODE_NONE: @@ -2454,7 +2452,7 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ } } else { /* special defines for FIBER (88E1011S only) */ - + /* Set Full/half duplex capabilities */ switch (pPrt->PLinkMode) { case SK_LMODE_AUTOHALF: @@ -2470,7 +2468,7 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E015, SKERR_HWI_E015MSG); } - + /* Set Auto-negotiation advertisement */ switch (pPrt->PFlowCtrlMode) { case SK_FLOW_MODE_NONE: @@ -2496,30 +2494,30 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ PhyCtrl |= PHY_CT_RE_CFG; } } - + #ifdef VCPU /* * E-mail from Gu Lin (08-03-2002): */ - + /* Program PHY register 30 as 16'h0708 for simulation speed up */ SkGmPhyWrite(pAC, IoC, Port, 30, 0x0708); - + VCpuWait(2000); #else /* VCPU */ - + /* Write 1000Base-T Control Register */ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_1000T_CTRL, C1000BaseT); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("1000B-T Ctrl=0x%04X\n", C1000BaseT)); - + /* Write AutoNeg Advertisement Register */ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_AUNE_ADV, AutoNegAdv); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Auto-Neg.Ad.=0x%04X\n", AutoNegAdv)); #endif /* VCPU */ - + if (DoLoop) { /* Set the PHY Loopback bit */ PhyCtrl |= PHY_CT_LOOP; @@ -2574,22 +2572,22 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CTRL, &PhyCtrl); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("PHY Ctrl Reg.=0x%04X\n", PhyCtrl)); - + /* Read 1000Base-T Control Register */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_CTRL, &C1000BaseT); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("1000B-T Ctrl =0x%04X\n", C1000BaseT)); - + /* Read AutoNeg Advertisement Register */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_ADV, &AutoNegAdv); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Auto-Neg. Ad.=0x%04X\n", AutoNegAdv)); - + /* Read Ext. PHY Specific Control */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_EXT_CTRL, &ExtPhyCtrl); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Ext PHY Ctrl=0x%04X\n", ExtPhyCtrl)); - + /* Read PHY Status */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, @@ -2597,7 +2595,7 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_STAT, &PhyStat1); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("PHY Stat Reg.=0x%04X\n", PhyStat1)); - + /* Read PHY Specific Status */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &PhySpecStat); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, @@ -2649,7 +2647,7 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ /* manually Master/Slave ? */ if (pPrt->PMSMode != SK_MS_MODE_AUTO) { Ctrl2 |= PHY_L_1000C_MSE; - + if (pPrt->PMSMode == SK_MS_MODE_MASTER) { Ctrl2 |= PHY_L_1000C_MSC; } @@ -2718,21 +2716,21 @@ SK_BOOL DoLoop) /* Should a Phy LoopBack be set-up? */ Ctrl1 = PHY_CT_ANE | PHY_CT_RE_CFG; } - + /* Initialize LED register here ? */ /* No. Please do it in SkDgXmitLed() (if required) and swap init order of LEDs and XMAC. (MAl) */ - + /* Write 1000Base-T Control Register */ SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_1000T_CTRL, Ctrl2); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("1000B-T Ctrl Reg=0x%04X\n", Ctrl2)); - + /* Write AutoNeg Advertisement Register */ SkXmPhyWrite(pAC, IoC, Port, PHY_LONE_AUNE_ADV, Ctrl3); SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("Auto-Neg. Adv. Reg=0x%04X\n", Ctrl3)); - + if (DoLoop) { /* Set the Phy Loopback bit, too */ @@ -2991,7 +2989,7 @@ int Port) /* Port Index (MAC_1 + n) */ 01-Sep-2000 RA;:;: SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_1000T_STAT, &ResAb); #endif /* 0 */ - + SkXmPhyRead(pAC, IoC, Port, PHY_BCOM_AUX_STAT, &AuxStat); if ((LPAb & PHY_B_AN_RF) != 0) { @@ -3016,7 +3014,7 @@ int Port) /* Port Index (MAC_1 + n) */ pPrt->PAutoNegFail = SK_TRUE; return(SK_AND_DUP_CAP); } - + #if 0 01-Sep-2000 RA;:;: /* Check Master/Slave resolution */ @@ -3027,7 +3025,7 @@ int Port) /* Port Index (MAC_1 + n) */ pPrt->PMSStatus = SK_MS_STAT_FAULT; return(SK_AND_OTHER); } - + pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? SK_MS_STAT_MASTER : SK_MS_STAT_SLAVE; #endif /* 0 */ @@ -3084,7 +3082,7 @@ int Port) /* Port Index (MAC_1 + n) */ /* Get PHY parameters */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_AUNE_LP, &LPAb); - + if ((LPAb & PHY_M_AN_RF) != 0) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("AutoNegFail: Remote fault bit set Port %d\n", Port)); @@ -3093,7 +3091,7 @@ int Port) /* Port Index (MAC_1 + n) */ } SkGmPhyRead(pAC, IoC, Port, PHY_MARV_1000T_STAT, &ResAb); - + /* Check Master/Slave resolution */ if ((ResAb & PHY_B_1000S_MSF) != 0) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, @@ -3102,13 +3100,13 @@ int Port) /* Port Index (MAC_1 + n) */ pPrt->PMSStatus = SK_MS_STAT_FAULT; return(SK_AND_OTHER); } - + pPrt->PMSStatus = ((ResAb & PHY_B_1000S_MSR) != 0) ? (SK_U8)SK_MS_STAT_MASTER : (SK_U8)SK_MS_STAT_SLAVE; - + /* Read PHY Specific Status */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_PHY_STAT, &AuxStat); - + /* Check Speed & Duplex resolved */ if ((AuxStat & PHY_M_PS_SPDUP_RES) == 0) { SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, @@ -3117,14 +3115,14 @@ int Port) /* Port Index (MAC_1 + n) */ pPrt->PLinkModeStatus = SK_LMODE_STAT_UNKNOWN; return(SK_AND_DUP_CAP); } - + if ((AuxStat & PHY_M_PS_FULL_DUP) != 0) { pPrt->PLinkModeStatus = SK_LMODE_STAT_AUTOFULL; } else { pPrt->PLinkModeStatus = SK_LMODE_STAT_AUTOHALF; } - + /* Check PAUSE mismatch */ /* We are using IEEE 802.3z/D5.0 Table 37-4 */ if ((AuxStat & PHY_M_PS_PAUSE_MSK) == PHY_M_PS_PAUSE_MSK) { @@ -3143,7 +3141,7 @@ int Port) /* Port Index (MAC_1 + n) */ /* PAUSE mismatch -> no PAUSE */ pPrt->PFlowCtrlStatus = SK_FLOW_STAT_NONE; } - + /* set used link speed */ switch ((unsigned)(AuxStat & PHY_M_PS_SPEED_MSK)) { case (unsigned)PHY_M_PS_SPEED_1000: @@ -3208,7 +3206,7 @@ int Port) /* Port Index (MAC_1 + n) */ else { pPrt->PLinkModeStatus = SK_LMODE_STAT_AUTOHALF; } - + /* Check Master/Slave resolution */ if ((ResAb & PHY_L_1000S_MSF) != 0) { /* Error */ @@ -3261,7 +3259,7 @@ int Port) /* Port Index (MAC_1 + n) */ SK_ERR_LOG(pAC, SK_ERRCL_SW | SK_ERRCL_INIT, SKERR_HWI_E016, SKERR_HWI_E016MSG); } - + return(SK_AND_OK); } /* SkXmAutoNegDoneLone */ @@ -3332,7 +3330,7 @@ int Port) /* Port Index (MAC_1 + n) */ default: return(SK_AND_OTHER); } - + if (Rtv != SK_AND_OK) { return(Rtv); } @@ -3341,7 +3339,7 @@ int Port) /* Port Index (MAC_1 + n) */ pPrt->PAutoNegFail = SK_FALSE; SkMacRxTxEnable(pAC, IoC, Port); - + return(SK_AND_OK); } /* SkMacAutoNegDone */ @@ -3383,7 +3381,7 @@ int Para) /* Parameter to set: MAC or PHY LoopBack, Duplex Mode */ Word &= ~XM_MMU_GMII_LOOP; break; } - + switch (Para & (SK_PHY_FULLD_ON | SK_PHY_FULLD_OFF)) { case SK_PHY_FULLD_ON: Word |= XM_MMU_GMII_FD; @@ -3392,7 +3390,7 @@ int Para) /* Parameter to set: MAC or PHY LoopBack, Duplex Mode */ Word &= ~XM_MMU_GMII_FD; break; } - + XM_OUT16(IoC, Port, XM_MMU_CMD, Word | XM_MMU_ENA_RX | XM_MMU_ENA_TX); /* dummy read to ensure writing */ @@ -3418,7 +3416,7 @@ int Port, /* Port Index (MAC_1 + n) */ int Para) /* Parameter to set: MAC LoopBack, Duplex Mode */ { SK_U16 Ctrl; - + GM_IN16(IoC, Port, GM_GP_CTRL, &Ctrl); switch (Para & (SK_MAC_LOOPB_ON | SK_MAC_LOOPB_OFF)) { @@ -3438,7 +3436,7 @@ int Para) /* Parameter to set: MAC LoopBack, Duplex Mode */ Ctrl &= ~GM_GPCR_DUP_FULL; break; } - + GM_OUT16(IoC, Port, GM_GP_CTRL, Ctrl | GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); /* dummy read to ensure writing */ @@ -3462,11 +3460,11 @@ int Port, /* Port Index (MAC_1 + n) */ int Para) { if (pAC->GIni.GIGenesis) { - + SkXmSetRxTxEn(pAC, IoC, Port, Para); } else { - + SkGmSetRxTxEn(pAC, IoC, Port, Para); } @@ -3511,9 +3509,9 @@ int Port) /* Port Index (MAC_1 + n) */ if (pAC->GIni.GIGenesis) { /* set Duplex Mode and Pause Mode */ SkXmInitDupMd(pAC, IoC, Port); - + SkXmInitPauseMd(pAC, IoC, Port); - + /* * Initialize the Interrupt Mask Register. Default IRQs are... * - Link Asynchronous Event @@ -3529,23 +3527,23 @@ int Port) /* Port Index (MAC_1 + n) */ /* add IRQ for Receive FIFO Overflow */ IntMask &= ~XM_IS_RXF_OV; #endif /* DEBUG */ - + if (pPrt->PhyType != SK_PHY_XMAC) { /* disable GP0 interrupt bit */ IntMask |= XM_IS_INP_ASS; } XM_OUT16(IoC, Port, XM_IMSK, IntMask); - + /* get MMU Command Reg. */ XM_IN16(IoC, Port, XM_MMU_CMD, &Reg); - + if (pPrt->PhyType != SK_PHY_XMAC && (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL || pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL)) { /* set to Full Duplex */ Reg |= XM_MMU_GMII_FD; } - + switch (pPrt->PhyType) { case SK_PHY_BCOM: /* @@ -3568,7 +3566,7 @@ int Port) /* Port Index (MAC_1 + n) */ break; #endif /* OTHER_PHY */ } - + /* enable Rx/Tx */ XM_OUT16(IoC, Port, XM_MMU_CMD, Reg | XM_MMU_ENA_RX | XM_MMU_ENA_TX); } @@ -3585,18 +3583,18 @@ int Port) /* Port Index (MAC_1 + n) */ /* add IRQ for Receive FIFO Overrun */ IntMask |= GM_IS_RX_FF_OR; #endif /* DEBUG */ - + SK_OUT8(IoC, GMAC_IRQ_MSK, (SK_U8)IntMask); - + /* get General Purpose Control */ GM_IN16(IoC, Port, GM_GP_CTRL, &Reg); - + if (pPrt->PLinkModeStatus == SK_LMODE_STAT_FULL || pPrt->PLinkModeStatus == SK_LMODE_STAT_AUTOFULL) { /* set to Full Duplex */ Reg |= GM_GPCR_DUP_FULL; } - + /* enable Rx/Tx */ GM_OUT16(IoC, Port, GM_GP_CTRL, Reg | GM_GPCR_RX_ENA | GM_GPCR_TX_ENA); @@ -3605,7 +3603,7 @@ int Port) /* Port Index (MAC_1 + n) */ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); #endif /* VCPU */ } - + return(0); } /* SkMacRxTxEnable */ @@ -3627,16 +3625,16 @@ int Port) /* Port Index (MAC_1 + n) */ SK_U16 Word; if (pAC->GIni.GIGenesis) { - + XM_IN16(IoC, Port, XM_MMU_CMD, &Word); - + XM_OUT16(IoC, Port, XM_MMU_CMD, Word & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX)); - + /* dummy read to ensure writing */ XM_IN16(IoC, Port, XM_MMU_CMD, &Word); } else { - + GM_IN16(IoC, Port, GM_GP_CTRL, &Word); GM_OUT16(IoC, Port, GM_GP_CTRL, Word & ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA)); @@ -3666,10 +3664,10 @@ int Port) /* Port Index (MAC_1 + n) */ pPrt = &pAC->GIni.GP[Port]; if (pAC->GIni.GIGenesis) { - + /* disable all XMAC IRQs */ - XM_OUT16(IoC, Port, XM_IMSK, 0xffff); - + XM_OUT16(IoC, Port, XM_IMSK, 0xffff); + /* Disable all PHY interrupts */ switch (pPrt->PhyType) { case SK_PHY_BCOM: @@ -3698,7 +3696,7 @@ int Port) /* Port Index (MAC_1 + n) */ else { /* disable all GMAC IRQs */ SK_OUT8(IoC, GMAC_IRQ_MSK, 0); - + #ifndef VCPU /* Disable all PHY interrupts */ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_INT_MASK, 0); @@ -3813,9 +3811,9 @@ int Port) /* Port Index (MAC_1 + n) */ SK_U16 IStatus2; pPrt = &pAC->GIni.GP[Port]; - + XM_IN16(IoC, Port, XM_ISRC, &IStatus); - + /* LinkPartner Auto-negable? */ if (pPrt->PhyType == SK_PHY_XMAC) { SkXmAutoNegLipaXmac(pAC, IoC, Port, IStatus); @@ -3826,7 +3824,7 @@ int Port) /* Port Index (MAC_1 + n) */ XM_IS_RX_PAGE | XM_IS_TX_PAGE | XM_IS_AND | XM_IS_INP_ASS); } - + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("XmacIrq Port %d Isr 0x%04x\n", Port, IStatus)); @@ -3939,12 +3937,12 @@ int Port) /* Port Index (MAC_1 + n) */ SK_U8 IStatus; /* Interrupt status */ pPrt = &pAC->GIni.GP[Port]; - + SK_IN8(IoC, GMAC_IRQ_SRC, &IStatus); - + /* LinkPartner Auto-negable? */ SkMacAutoNegLipaPhy(pAC, IoC, Port, IStatus); - + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_IRQ, ("GmacIrq Port %d Isr 0x%04x\n", Port, IStatus)); @@ -4044,7 +4042,7 @@ unsigned int Port) /* Port Index (MAC_1 + n) */ do { XM_IN16(IoC, Port, XM_STAT_CMD, &StatReg); - + if (++WaitIndex > 10) { SK_ERR_LOG(pAC, SK_ERRCL_HW, SKERR_HWI_E021, SKERR_HWI_E021MSG); @@ -4052,7 +4050,7 @@ unsigned int Port) /* Port Index (MAC_1 + n) */ return(1); } } while ((StatReg & (XM_SC_SNP_TXC | XM_SC_SNP_RXC)) != 0); - + return(0); } /* SkXmUpdateStats */ @@ -4096,12 +4094,12 @@ SK_U16 StatAddr, /* MIB counter base address */ SK_U32 *pVal) /* ptr to return statistic value */ { if ((StatAddr < XM_TXF_OK) || (StatAddr > XM_RXF_MAX_SZ)) { - + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG); - + return(1); } - + XM_IN32(IoC, Port, StatAddr, pVal); return(0); @@ -4129,14 +4127,14 @@ SK_U32 *pVal) /* ptr to return statistic value */ { if ((StatAddr < GM_RXF_UC_OK) || (StatAddr > GM_TXE_FIFO_UR)) { - + SK_ERR_LOG(pAC, SK_ERRCL_SW, SKERR_HWI_E022, SKERR_HWI_E022MSG); - + SK_DBG_MSG(pAC, SK_DBGMOD_HWM, SK_DBGCAT_CTRL, ("SkGmMacStat: wrong MIB counter 0x%04X\n", StatAddr)); return(1); } - + GM_IN32(IoC, Port, StatAddr, pVal); return(0); @@ -4190,17 +4188,17 @@ unsigned int Port) /* Port Index (MAC_1 + n) */ #ifndef VCPU /* set MIB Clear Counter Mode */ GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg | GM_PAR_MIB_CLR); - + /* read all MIB Counters with Clear Mode set */ for (i = 0; i < GM_MIB_CNT_SIZE; i++) { /* the reset is performed only when the lower 16 bits are read */ GM_IN16(IoC, Port, GM_MIB_CNT_BASE + 8*i, &Word); } - + /* clear MIB Clear Counter Mode */ GM_OUT16(IoC, Port, GM_PHY_ADDR, Reg); #endif /* !VCPU */ - + return(0); } /* SkGmResetCounter */ @@ -4240,7 +4238,7 @@ SK_U64 *pStatus) /* ptr for return overflow status value */ XM_IN32(IoC, Port, XM_RX_CNT_EV, &RegVal); Status |= (SK_U64)RegVal << 32; } - + if ((IStatus & XM_IS_TXC_OV) != 0) { XM_IN32(IoC, Port, XM_TX_CNT_EV, &RegVal); @@ -4289,13 +4287,13 @@ SK_U64 *pStatus) /* ptr for return overflow status value */ GM_IN16(IoC, Port, GM_RX_IRQ_SRC, &RegVal); Status |= (SK_U64)RegVal << 32; } - + if ((IStatus & GM_IS_TX_CO_OV) != 0) { /* this register is self-clearing after read */ GM_IN16(IoC, Port, GM_TX_IRQ_SRC, &RegVal); Status |= (SK_U64)RegVal; } - + /* this register is self-clearing after read */ GM_IN16(IoC, Port, GM_TR_IRQ_SRC, &RegVal); /* Rx overflow interrupt register bits (LoByte)*/ @@ -4317,7 +4315,7 @@ SK_U64 *pStatus) /* ptr for return overflow status value */ * gets the results if 'StartTest' is true * * NOTE: this test is meaningful only when link is down - * + * * Returns: * 0: success * 1: no YUKON copper @@ -4336,7 +4334,7 @@ SK_BOOL StartTest) /* flag for start / get result */ pPrt = &pAC->GIni.GP[Port]; if (pPrt->PhyType != SK_PHY_MARV_COPPER) { - + return(1); } @@ -4345,7 +4343,7 @@ SK_BOOL StartTest) /* flag for start / get result */ if ((pPrt->PhyId1 & PHY_I1_REV_MSK) < 4) { /* apply TDR workaround from Marvell */ SkGmPhyWrite(pAC, IoC, Port, 29, 0x001e); - + SkGmPhyWrite(pAC, IoC, Port, 30, 0xcc00); SkGmPhyWrite(pAC, IoC, Port, 30, 0xc800); SkGmPhyWrite(pAC, IoC, Port, 30, 0xc400); @@ -4362,10 +4360,10 @@ SK_BOOL StartTest) /* flag for start / get result */ /* start Cable Diagnostic Test */ SkGmPhyWrite(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, (SK_U16)(RegVal | PHY_M_CABD_ENA_TEST)); - + return(0); } - + /* Read Cable Diagnostic Reg */ SkGmPhyRead(pAC, IoC, Port, PHY_MARV_CABLE_DIAG, &RegVal); diff --git a/drivers/sk98lin/uboot_drv.c b/drivers/sk98lin/uboot_drv.c index ddfa6fb318..263dac8106 100644 --- a/drivers/sk98lin/uboot_drv.c +++ b/drivers/sk98lin/uboot_drv.c @@ -106,7 +106,7 @@ static void skge_halt(struct eth_device *dev) static int skge_send(struct eth_device *dev, volatile void *packet, - int length) + int length) { int ret = -1; struct sk_buff * skb = alloc_skb(length, 0); diff --git a/drivers/sk98lin/uboot_skb.c b/drivers/sk98lin/uboot_skb.c index b87ad163f6..3a487a8e3d 100644 --- a/drivers/sk98lin/uboot_skb.c +++ b/drivers/sk98lin/uboot_skb.c @@ -69,7 +69,7 @@ struct sk_buff * alloc_skb(u32 size, int dummy) sk_table[i]->data += 16 - ((u32)sk_table[i]->data & 15); sk_table[i]->len = size; - + break; } |
