blackfin: bf60x: add rsi/sdh support

Add rsi/sdh support for bf60x.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Sonic Zhang <sonic.adi@gmail.com>

1 files changed, 52 insertions, 16 deletions

diff --git a/drivers/mmc/bfin_sdh.c b/drivers/mmc/bfin_sdh.c
index 8d59d46c64..0f98b961fd 100644
--- a/drivers/mmc/bfin_sdh.c
+++ b/drivers/mmc/bfin_sdh.c
@@ -19,9 +19,7 @@
 #include <asm/mach-common/bits/sdh.h>
 #include <asm/mach-common/bits/dma.h>
 
-#if defined(__ADSPBF50x__) || defined(__ADSPBF51x__)
-# define bfin_read_SDH_PWR_CTL		bfin_read_RSI_PWR_CONTROL
-# define bfin_write_SDH_PWR_CTL		bfin_write_RSI_PWR_CONTROL
+#if defined(__ADSPBF50x__) || defined(__ADSPBF51x__) || defined(__ADSPBF60x__)
 # define bfin_read_SDH_CLK_CTL		bfin_read_RSI_CLK_CONTROL
 # define bfin_write_SDH_CLK_CTL		bfin_write_RSI_CLK_CONTROL
 # define bfin_write_SDH_ARGUMENT	bfin_write_RSI_ARGUMENT
@@ -38,10 +36,21 @@
 # define bfin_write_SDH_STATUS_CLR 	bfin_write_RSI_STATUSCL
 # define bfin_read_SDH_CFG		bfin_read_RSI_CONFIG
 # define bfin_write_SDH_CFG		bfin_write_RSI_CONFIG
+# if defined(__ADSPBF60x__)
+# define bfin_read_SDH_BLK_SIZE		bfin_read_RSI_BLKSZ
+# define bfin_write_SDH_BLK_SIZE	bfin_write_RSI_BLKSZ
+# define bfin_write_DMA_START_ADDR	bfin_write_DMA10_START_ADDR
+# define bfin_write_DMA_X_COUNT		bfin_write_DMA10_X_COUNT
+# define bfin_write_DMA_X_MODIFY	bfin_write_DMA10_X_MODIFY
+# define bfin_write_DMA_CONFIG		bfin_write_DMA10_CONFIG
+# else
+# define bfin_read_SDH_PWR_CTL		bfin_read_RSI_PWR_CONTROL
+# define bfin_write_SDH_PWR_CTL		bfin_write_RSI_PWR_CONTROL
 # define bfin_write_DMA_START_ADDR	bfin_write_DMA4_START_ADDR
 # define bfin_write_DMA_X_COUNT		bfin_write_DMA4_X_COUNT
 # define bfin_write_DMA_X_MODIFY	bfin_write_DMA4_X_MODIFY
 # define bfin_write_DMA_CONFIG		bfin_write_DMA4_CONFIG
+# endif
 # define PORTMUX_PINS \
 	{ P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0 }
 #elif defined(__ADSPBF54x__)
@@ -70,6 +79,9 @@ sdh_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd)
 		sdh_cmd |= CMD_RSP;
 	if (flags & MMC_RSP_136)
 		sdh_cmd |= CMD_L_RSP;
+#ifdef RSI_BLKSZ
+	sdh_cmd |= CMD_DATA0_BUSY;
+#endif
 
 	bfin_write_SDH_ARGUMENT(arg);
 	bfin_write_SDH_COMMAND(sdh_cmd);
@@ -104,6 +116,12 @@ sdh_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd)
 
 	bfin_write_SDH_STATUS_CLR(CMD_SENT_STAT | CMD_RESP_END_STAT |
 				CMD_TIMEOUT_STAT | CMD_CRC_FAIL_STAT);
+#ifdef RSI_BLKSZ
+	/* wait till card ready */
+	while (!(bfin_read_RSI_ESTAT() & SD_CARD_READY))
+		continue;
+	bfin_write_RSI_ESTAT(SD_CARD_READY);
+#endif
 
 	return ret;
 }
@@ -113,16 +131,19 @@ static int sdh_setup_data(struct mmc *mmc, struct mmc_data *data)
 {
 	u16 data_ctl = 0;
 	u16 dma_cfg = 0;
-	int ret = 0;
 	unsigned long data_size = data->blocksize * data->blocks;
 
 	/* Don't support write yet. */
 	if (data->flags & MMC_DATA_WRITE)
 		return UNUSABLE_ERR;
+#ifndef RSI_BLKSZ
 	data_ctl |= ((ffs(data_size) - 1) << 4);
+#else
+	bfin_write_SDH_BLK_SIZE(data_size);
+#endif
 	data_ctl |= DTX_DIR;
 	bfin_write_SDH_DATA_CTL(data_ctl);
-	dma_cfg = WDSIZE_32 | RESTART | WNR | DMAEN;
+	dma_cfg = WDSIZE_32 | PSIZE_32 | RESTART | WNR | DMAEN;
 
 	bfin_write_SDH_DATA_TIMER(-1);
 
@@ -137,7 +158,7 @@ static int sdh_setup_data(struct mmc *mmc, struct mmc_data *data)
 	/* kick off transfer */
 	bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
 
-	return ret;
+	return 0;
 }
 
 
@@ -147,13 +168,23 @@ static int bfin_sdh_request(struct mmc *mmc, struct mmc_cmd *cmd,
 	u32 status;
 	int ret = 0;
 
+	if (data) {
+		ret = sdh_setup_data(mmc, data);
+		if (ret)
+			return ret;
+	}
+
 	ret = sdh_send_cmd(mmc, cmd);
 	if (ret) {
+		bfin_write_SDH_COMMAND(0);
+		bfin_write_DMA_CONFIG(0);
+		bfin_write_SDH_DATA_CTL(0);
+		SSYNC();
 		printf("sending CMD%d failed\n", cmd->cmdidx);
 		return ret;
 	}
+
 	if (data) {
-		ret = sdh_setup_data(mmc, data);
 		do {
 			udelay(1);
 			status = bfin_read_SDH_STATUS();
@@ -208,10 +239,12 @@ static void bfin_sdh_set_ios(struct mmc *mmc)
 
 	if (mmc->bus_width == 4) {
 		cfg = bfin_read_SDH_CFG();
-		cfg &= ~0x80;
-		cfg |= 0x40;
+#ifndef RSI_BLKSZ
+		cfg &= ~PD_SDDAT3;
+#endif
+		cfg |= PUP_SDDAT3;
 		bfin_write_SDH_CFG(cfg);
-		clk_ctl |= WIDE_BUS;
+		clk_ctl |= WIDE_BUS_4;
 	}
 	bfin_write_SDH_CLK_CTL(clk_ctl);
 	sdh_set_clk(mmc->clock);
@@ -220,20 +253,23 @@ static void bfin_sdh_set_ios(struct mmc *mmc)
 static int bfin_sdh_init(struct mmc *mmc)
 {
 	const unsigned short pins[] = PORTMUX_PINS;
-	u16 pwr_ctl = 0;
+	int ret;
 
 	/* Initialize sdh controller */
-	peripheral_request_list(pins, "bfin_sdh");
+	ret = peripheral_request_list(pins, "bfin_sdh");
+	if (ret < 0)
+		return ret;
 #if defined(__ADSPBF54x__)
 	bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
 #endif
 	bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
 	/* Disable card detect pin */
 	bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | 0x60);
-
-	pwr_ctl |= ROD_CTL;
-	pwr_ctl |= PWR_ON;
-	bfin_write_SDH_PWR_CTL(pwr_ctl);
+#ifndef RSI_BLKSZ
+	bfin_write_SDH_PWR_CTL(PWR_ON | ROD_CTL);
+#else
+	bfin_write_SDH_CFG(bfin_read_SDH_CFG() | PWR_ON);
+#endif
 	return 0;
 }