summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
authorStephen Warren <swarren@nvidia.com>2016-04-26 15:29:00 -0600
committerJoe Hershberger <joe.hershberger@ni.com>2016-06-21 17:01:51 -0500
commitdad7b74045929ff10d93ec1dd60d0fd36fd9a527 (patch)
tree737e93fcc221aff1373ef362751f731f528c2838 /drivers/net
parent9f823615af919c6b89f0b80197f009f78299dcde (diff)
downloadblackbird-obmc-uboot-dad7b74045929ff10d93ec1dd60d0fd36fd9a527.tar.gz
blackbird-obmc-uboot-dad7b74045929ff10d93ec1dd60d0fd36fd9a527.zip
net: rtl8169: fix switching between adapters
The rtl8169 driver uses a global variable to store the register address of the adapter being operated upon. This is updated to point at the correct adapter when sending or receiving a packet, or shutting down the adapter, but not when initializing the adapter. Consequently, switching between different adapters within the same U-Boot runtime does not work correctly since the driver programs the wrong registers during rtl8169_eth_start() -> rtl8169_common_start() -> rtl8169_hw_start(). Note that since rtl8169_eth_stop() does set the global variable, the second consecutive attempt to use the "new" adapter did work even before this patch, because each time network usage is shut down, the network core calls stop, which sets the variable so that the next start does actually initialize the hardware, and the adapter works. Equally, rtl8169_eth_probe() calls rtl_init() which sets the global, so if using only a single device, or if picking the "right" device (based on probe order) when multiple devices are present, ioaddr will already be set correctly from the get-go, so the issue does not occur. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/rtl8169.c13
1 files changed, 9 insertions, 4 deletions
diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index 163b9df55c..843b083f8f 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -850,9 +850,11 @@ static void rtl8169_init_ring(pci_dev_t dev)
}
#ifdef CONFIG_DM_ETH
-static void rtl8169_common_start(struct udevice *dev, unsigned char *enetaddr)
+static void rtl8169_common_start(struct udevice *dev, unsigned char *enetaddr,
+ unsigned long dev_iobase)
#else
-static void rtl8169_common_start(pci_dev_t dev, unsigned char *enetaddr)
+static void rtl8169_common_start(pci_dev_t dev, unsigned char *enetaddr,
+ unsigned long dev_iobase)
#endif
{
int i;
@@ -862,6 +864,8 @@ static void rtl8169_common_start(pci_dev_t dev, unsigned char *enetaddr)
printf ("%s\n", __FUNCTION__);
#endif
+ ioaddr = dev_iobase;
+
rtl8169_init_ring(dev);
rtl8169_hw_start(dev);
/* Construct a perfect filter frame with the mac address as first match
@@ -885,8 +889,9 @@ static void rtl8169_common_start(pci_dev_t dev, unsigned char *enetaddr)
static int rtl8169_eth_start(struct udevice *dev)
{
struct eth_pdata *plat = dev_get_platdata(dev);
+ struct rtl8169_private *priv = dev_get_priv(dev);
- rtl8169_common_start(dev, plat->enetaddr);
+ rtl8169_common_start(dev, plat->enetaddr, priv->iobase);
return 0;
}
@@ -897,7 +902,7 @@ RESET - Finish setting up the ethernet interface
static int rtl_reset(struct eth_device *dev, bd_t *bis)
{
rtl8169_common_start((pci_dev_t)(unsigned long)dev->priv,
- dev->enetaddr);
+ dev->enetaddr, dev->iobase);
return 0;
}
OpenPOWER on IntegriCloud