mtd: nand: Remove jz4740 driver

This driver is not used by anyone, remove it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Scott Wood <oss@buserror.net>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>

2 files changed, 0 insertions, 259 deletions

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 6fb37182d5..aea6a93b28 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -50,7 +50,6 @@ obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
 obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
 obj-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
 obj-$(CONFIG_NAND_FSMC) += fsmc_nand.o
-obj-$(CONFIG_NAND_JZ4740) += jz4740_nand.o
 obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o
 obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
 obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
deleted file mode 100644
index abcedc2102..0000000000
--- a/drivers/mtd/nand/jz4740_nand.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Platform independend driver for JZ4740.
- *
- * Copyright (c) 2007 Ingenic Semiconductor Inc.
- * Author: <jlwei@ingenic.cn>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-
-#include <nand.h>
-#include <asm/io.h>
-#include <asm/jz4740.h>
-
-#define JZ_NAND_DATA_ADDR ((void __iomem *)0xB8000000)
-#define JZ_NAND_CMD_ADDR (JZ_NAND_DATA_ADDR + 0x8000)
-#define JZ_NAND_ADDR_ADDR (JZ_NAND_DATA_ADDR + 0x10000)
-
-#define JZ_NAND_ECC_CTRL_ENCODING	BIT(3)
-#define JZ_NAND_ECC_CTRL_RS		BIT(2)
-#define JZ_NAND_ECC_CTRL_RESET		BIT(1)
-#define JZ_NAND_ECC_CTRL_ENABLE		BIT(0)
-
-#define EMC_SMCR1_OPT_NAND	0x094c4400
-/* Optimize the timing of nand */
-
-static struct jz4740_emc * emc = (struct jz4740_emc *)JZ4740_EMC_BASE;
-
-static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
-	.eccbytes = 72,
-	.eccpos = {
-		12, 13, 14, 15, 16, 17, 18, 19,
-		20, 21, 22, 23, 24, 25, 26, 27,
-		28, 29, 30, 31, 32, 33, 34, 35,
-		36, 37, 38, 39, 40, 41, 42, 43,
-		44, 45, 46, 47, 48, 49, 50, 51,
-		52, 53, 54, 55, 56, 57, 58, 59,
-		60, 61, 62, 63, 64, 65, 66, 67,
-		68, 69, 70, 71, 72, 73, 74, 75,
-		76, 77, 78, 79, 80, 81, 82, 83 },
-	.oobfree = {
-		{.offset = 2,
-		 .length = 10 },
-		{.offset = 84,
-		 .length = 44 } }
-};
-
-static int is_reading;
-
-static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-	struct nand_chip *this = mtd->priv;
-	uint32_t reg;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_ALE)
-			this->IO_ADDR_W = JZ_NAND_ADDR_ADDR;
-		else if (ctrl & NAND_CLE)
-			this->IO_ADDR_W = JZ_NAND_CMD_ADDR;
-		else
-			this->IO_ADDR_W = JZ_NAND_DATA_ADDR;
-
-		reg = readl(&emc->nfcsr);
-		if (ctrl & NAND_NCE)
-			reg |= EMC_NFCSR_NFCE1;
-		else
-			reg &= ~EMC_NFCSR_NFCE1;
-		writel(reg, &emc->nfcsr);
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W);
-}
-
-static int jz_nand_device_ready(struct mtd_info *mtd)
-{
-	return (readl(GPIO_PXPIN(2)) & 0x40000000) ? 1 : 0;
-}
-
-void board_nand_select_device(struct nand_chip *nand, int chip)
-{
-	/*
-	 * Don't use "chip" to address the NAND device,
-	 * generate the cs from the address where it is encoded.
-	 */
-}
-
-static int jz_nand_rs_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
-				u_char *ecc_code)
-{
-	uint32_t status;
-	int i;
-
-	if (is_reading)
-		return 0;
-
-	do {
-		status = readl(&emc->nfints);
-	} while (!(status & EMC_NFINTS_ENCF));
-
-	/* disable ecc */
-	writel(readl(&emc->nfecr) & ~EMC_NFECR_ECCE, &emc->nfecr);
-
-	for (i = 0; i < 9; i++)
-		ecc_code[i] = readb(&emc->nfpar[i]);
-
-	return 0;
-}
-
-static void jz_nand_hwctl(struct mtd_info *mtd, int mode)
-{
-	uint32_t reg;
-
-	writel(0, &emc->nfints);
-	reg = readl(&emc->nfecr);
-	reg |= JZ_NAND_ECC_CTRL_RESET;
-	reg |= JZ_NAND_ECC_CTRL_ENABLE;
-	reg |= JZ_NAND_ECC_CTRL_RS;
-
-	switch (mode) {
-	case NAND_ECC_READ:
-		reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
-		is_reading = 1;
-		break;
-	case NAND_ECC_WRITE:
-		reg |= JZ_NAND_ECC_CTRL_ENCODING;
-		is_reading = 0;
-		break;
-	default:
-		break;
-	}
-
-	writel(reg, &emc->nfecr);
-}
-
-/* Correct 1~9-bit errors in 512-bytes data */
-static void jz_rs_correct(unsigned char *dat, int idx, int mask)
-{
-	int i;
-
-	idx--;
-
-	i = idx + (idx >> 3);
-	if (i >= 512)
-		return;
-
-	mask <<= (idx & 0x7);
-
-	dat[i] ^= mask & 0xff;
-	if (i < 511)
-		dat[i + 1] ^= (mask >> 8) & 0xff;
-}
-
-static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat,
-				   u_char *read_ecc, u_char *calc_ecc)
-{
-	int k;
-	uint32_t errcnt, index, mask, status;
-
-	/* Set PAR values */
-	const uint8_t all_ff_ecc[] = {
-		0xcd, 0x9d, 0x90, 0x58, 0xf4, 0x8b, 0xff, 0xb7, 0x6f };
-
-	if (read_ecc[0] == 0xff && read_ecc[1] == 0xff &&
-	    read_ecc[2] == 0xff && read_ecc[3] == 0xff &&
-	    read_ecc[4] == 0xff && read_ecc[5] == 0xff &&
-	    read_ecc[6] == 0xff && read_ecc[7] == 0xff &&
-	    read_ecc[8] == 0xff) {
-		for (k = 0; k < 9; k++)
-			writeb(all_ff_ecc[k], &emc->nfpar[k]);
-	} else {
-		for (k = 0; k < 9; k++)
-			writeb(read_ecc[k], &emc->nfpar[k]);
-	}
-	/* Set PRDY */
-	writel(readl(&emc->nfecr) | EMC_NFECR_PRDY, &emc->nfecr);
-
-	/* Wait for completion */
-	do {
-		status = readl(&emc->nfints);
-	} while (!(status & EMC_NFINTS_DECF));
-
-	/* disable ecc */
-	writel(readl(&emc->nfecr) & ~EMC_NFECR_ECCE, &emc->nfecr);
-
-	/* Check decoding */
-	if (!(status & EMC_NFINTS_ERR))
-		return 0;
-
-	if (status & EMC_NFINTS_UNCOR) {
-		printf("uncorrectable ecc\n");
-		return -1;
-	}
-
-	errcnt = (status & EMC_NFINTS_ERRCNT_MASK) >> EMC_NFINTS_ERRCNT_BIT;
-
-	switch (errcnt) {
-	case 4:
-		index = (readl(&emc->nferr[3]) & EMC_NFERR_INDEX_MASK) >>
-			EMC_NFERR_INDEX_BIT;
-		mask = (readl(&emc->nferr[3]) & EMC_NFERR_MASK_MASK) >>
-			EMC_NFERR_MASK_BIT;
-		jz_rs_correct(dat, index, mask);
-	case 3:
-		index = (readl(&emc->nferr[2]) & EMC_NFERR_INDEX_MASK) >>
-			EMC_NFERR_INDEX_BIT;
-		mask = (readl(&emc->nferr[2]) & EMC_NFERR_MASK_MASK) >>
-			EMC_NFERR_MASK_BIT;
-		jz_rs_correct(dat, index, mask);
-	case 2:
-		index = (readl(&emc->nferr[1]) & EMC_NFERR_INDEX_MASK) >>
-			EMC_NFERR_INDEX_BIT;
-		mask = (readl(&emc->nferr[1]) & EMC_NFERR_MASK_MASK) >>
-			EMC_NFERR_MASK_BIT;
-		jz_rs_correct(dat, index, mask);
-	case 1:
-		index = (readl(&emc->nferr[0]) & EMC_NFERR_INDEX_MASK) >>
-			EMC_NFERR_INDEX_BIT;
-		mask = (readl(&emc->nferr[0]) & EMC_NFERR_MASK_MASK) >>
-			EMC_NFERR_MASK_BIT;
-		jz_rs_correct(dat, index, mask);
-	default:
-		break;
-	}
-
-	return errcnt;
-}
-
-/*
- * Main initialization routine
- */
-int board_nand_init(struct nand_chip *nand)
-{
-	uint32_t reg;
-
-	reg = readl(&emc->nfcsr);
-	reg |= EMC_NFCSR_NFE1;	/* EMC setup, Set NFE bit */
-	writel(reg, &emc->nfcsr);
-
-	writel(EMC_SMCR1_OPT_NAND, &emc->smcr[1]);
-
-	nand->IO_ADDR_R		= JZ_NAND_DATA_ADDR;
-	nand->IO_ADDR_W		= JZ_NAND_DATA_ADDR;
-	nand->cmd_ctrl		= jz_nand_cmd_ctrl;
-	nand->dev_ready		= jz_nand_device_ready;
-	nand->ecc.hwctl		= jz_nand_hwctl;
-	nand->ecc.correct	= jz_nand_rs_correct_data;
-	nand->ecc.calculate	= jz_nand_rs_calculate_ecc;
-	nand->ecc.mode		= NAND_ECC_HW_OOB_FIRST;
-	nand->ecc.size		= CONFIG_SYS_NAND_ECCSIZE;
-	nand->ecc.bytes		= CONFIG_SYS_NAND_ECCBYTES;
-	nand->ecc.strength	= 4;
-	nand->ecc.layout	= &qi_lb60_ecclayout_2gb;
-	nand->chip_delay	= 50;
-	nand->bbt_options	|= NAND_BBT_USE_FLASH;
-
-	return 0;
-}